Ensuring power and raw materials supply. A challenge to politics and economy?; Sichere Energie- und Rohstoffversorgung. Herausforderung fuer Politik und Wirtschaft?

Energy Technology Data Exchange (ETDEWEB)

Bardt, H.

2008-07-01

In recent years the booming Chinese economy and the expected additional demand from India have led to a significant increase in the need for raw materials. This increase has been accompanied by rising prices for energy feedstocks and mineral resources and a reduction in the availability of certain products. At the same time, there are limits to the expansion of supply, since natural resources are essentially finite. These developments have led to a lively debate among industrialists and politicians on the strategies to be adopted to secure supplies of raw materials. Here, two steps are essential. First, production and consumption must be adapted to higher prices. Secondly, a policy must be developed to combat the protectionism currently prevalent in the international commodity markets, which is in many cases pushing up prices and reducing prosperity. (orig.)

Raw materials and energy - effects of globalization on the safety of German's supply sufficiency; Rohstoffe und Energie. Auswirkungen der Globalisierung auf die Versorgungssicherheit Deutschlands

Energy Technology Data Exchange (ETDEWEB)

Wellmer, F.W. [Technische Univ. Berlin (Germany)

2001-07-01

Raw material deposits are not mobile, so globalisation has always been an important element of raw materials production and trade. Raw materials production and transport should be regarded as a large-scale system. Lower freight rates have made overseas transport possible even for bulk raw materials. If we look at Germany's raw materials supply, we find that we are customers buying from the whole world. [German] Da Lagerstaetten ortsgebunden sind, ist Globalisierung seit jeher ein wesentliches Element von Rohstoffgewinnung und handel. Rohstoffgewinnung und Transportmoeglichkeiten muessen als Grosssystem betrachtet werden. Nicht zuletzt wegen der gesunkenen Frachtraten ist der ueberseeische Transport heute selbst fuer Massenrohstoffe moeglich geworden. Betrachtet man die Rohstoffversorgung Deutschlands, wird deutlich, dass wir Kunde der ganzen Welt sind. (orig.)

A framework for evaluating the accessibility of raw materials from end-of-life products and the Earth's crust.

Science.gov (United States)

Mueller, Sandra R; Wäger, Patrick A; Turner, David A; Shaw, Peter J; Williams, Ian D

2017-10-01

An increasing number of geochemically scarce metallic raw materials are entering into our lives via new technologies. A reversal of this trend is not foreseeable, leading to concerns regarding the security of their supply. However, the evaluation of raw material supply is currently hampered by inconsistent use of fundamental terminologies and incomplete assessment criteria. In this paper, we aim to establish a consistent framework for evaluating raw material supply from both anthropogenic and geological sources. A method for concept extraction was applied to evaluate systematically the use of fundamental terms in the evaluation of raw material supply. The results have shown that 'availability' is commonly used in raw material supply evaluations, whilst other researchers suggest that raw material supply should be evaluated based on 'accessibility'. It was revealed that 'accessibility' actually comprises two aspects: 'availability' and 'approachability'. Raw material 'approachability' has not previously been explicitly addressed at a system level. A novel, consistent framework for evaluating raw material supply was therefore developed. To demonstrate the application of the established framework, we evaluated the raw material supply of four rare earth element case studies. Three case studies are End-of-Life products (the anthroposphere) from Switzerland: (i) phosphors in fluorescent lamps, (i) permanent magnets in the drive motors of electric cars and (iii) fibre optic cable. The fourth case study source is the Earth's crust (the geosphere): Mount Weld deposit in Australia. The framework comprises a comprehensive evaluation of six components relating to raw material mining and processing: their geological knowledge, eligibility, technology, economic, societal and environmental impacts. Our results show that metals are not considered to be fully accessible in any of the case studies due to a lack of necessary technologies and potential societal and environmental

Biotechnologies for critical raw material recovery from primary and secondary sources: R&D priorities and future perspectives

NARCIS (Netherlands)

Hennebel, T.; Boon, N.; Maes, S.; Lenz, M.

2015-01-01

Europe is confronted with an increasing supply risk of critical raw materials. These can be defined as materials of which the risks of supply shortage and their impacts on the economy are higher compared to most of other raw materials. Within the framework of the EU Innovation Partnership on raw

Refining of raw materials, lignite present economic problems

Energy Technology Data Exchange (ETDEWEB)

Schirmer, G.

1985-06-01

East Germany seeks an economic intensification program that involves refining raw materials to a higher level. Lignite briquetting prior to liquefaction and gasification illustrates both the theoretical and practical aspects of that goal and also introduces questions of secure supplies. The author describes the special labor processes, use of technology, recycling of waste materials, and other new problems that the approach entails as the refined raw materials become new materials or energy sources. Economics based on the value of the refined product and the cost of the materials determine the degree of refinement. The concept also involves the relationship of producer and user as profits increase.

Trends and perspectives of raw materials supply in Germany in the 21st millennium. Colloquium 5. Conference report; Trends und Perspektiven der Rohstoffversorgung Deutschlands im 21. Jahrhundert. Kolloquium 5. Tagungsband

Energy Technology Data Exchange (ETDEWEB)

Slaby, D; Brezinski, H [comps.; Technische Univ. Bergakademie Freiberg (Germany). Fakultaet fuer Wirtschaftswissenschaften; Gerhardt, H [comp.; Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Bergbau; Herzig, P [comp.; Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Mineralogie

1999-07-01

The conference report comprises papers on raw materials policy and management, coal mining in Poland and Czekhia, perspectives of raw materials supply in Germany, mining law and raw materials supply, information systems for regional planning, and the use of washery tailings as construction materials. Ten papers have been recorded separately in the ENERGY database. [German] Der Tagungsband enthaelt Beitraege, die neben der Energierohstoffpolitik, die Rohstoffwirtschaft, den Kohlenbergbau in Polen und Tschechien betreffen. Es werden Perpesktiven der Rohstoffversorgung Deutschlands in der Zukunft sowie Bergrecht und Rohstoffsicherung diskutiert. Weitere Arbeiten betreffen Informationssyteme zur Regionalplannung sowie die Verwertung von Waschbergen als Baustoffersatz. Fuer die Datenbank Energy wurden zehn Beitraege separat aufgenommen.

Raw material uranium; Rohstoff Uran

Energy Technology Data Exchange (ETDEWEB)

NONE

2017-03-15

Uranium is an important raw material in human life. Mostly using nuclear fission uranium is used in nuclear medicine, industry and research. The most important application is the generation of electricity in nuclear power plants. Due to the global availability the worldwide uranium supply is guaranties for a long time. The contribution covers the issues medicine, neutron research, energy generation, occurrence, mining, processing, recycling and disposal.

Reflections on prospective raw materials and materials with regard to the Czech Republic

International Nuclear Information System (INIS)

Schejbal, C.; Palas, M.

1997-01-01

Reflections on prospective mineral raw materials and materials must rest upon the expected demographic evolution, the evaluation of economic development and the development of manufacturing technologies and materials corresponding to them, trends in the consumption of mineral raw materials and possibilities of securing them. The evaluation of the given factors under conditions of the Czech Republic shows that one of the decisive prerequisites to transforming the Czech economy is to assure the fuel and energy security of the state. In addition to emphasis put on traditional and newly developed technologies of utilization of domestic resources of coal and the development of nuclear power, a diversification of supplies of oil and gas is necessary. Moreover, it is necessary to ensure domestic resources of raw materials to some prospective material areas, or to provide these raw materials by means of imports and/or entrepreneurial activity abroad. As far as raw materials for building and industrial rocks are concerned, it is necessary to support the exploitation and home utilization through laws and suitable economic tools at respecting environmental limitations. With non-traditional prospective raw materials, it will be desirable to promote exploration and mining especially in those cases when a precondition exists for the securing of sufficient reserves or when reserves are already known

INTRAW, the EU Observatory for raw materials: fostering international cooperation and developing new opportunities

Science.gov (United States)

Correia, Victor; Allington, Ruth; Keane, Christopher

2016-04-01

A secure supply of raw materials is a European priority that extends beyond country borders and national policies. Recent European initiatives have pioneered the development of an EU strategy on raw materials emphasizing the concept of the "added value chain", which continues to pursue the three pillar strategy to: (1) ensure the fair and sustainable supply of raw materials from international markets, promoting international cooperation with developed and developing countries; (2) foster sustainable supply of raw materials from European sources, and (3) reduce consumption of primary raw materials by increasing resource efficiency and promoting recycling. This contribution presents the Horizon 2020 funded project INTRAW, the objective of which is to establish the European Union's International Observatory for Raw Materials. The creation and maintenance of the European Union's International Observatory for Raw Materials is designed to have a strong impact in two dimensions: 1. To narrow the existing gap in aspects of the raw materials knowledge infrastructure in the EU by providing a link with the same knowledge infrastructure in technologically advanced reference countries. This should contribute to the harmonization of mineral policies all over the EU, by providing data that enables evidence-based policies and appropriate, cost-effective management, planning and adaptation decisions by the public sector. This will benefit businesses, industry and society. The Observatory will also provide to policy makers in the EU and its Member States the data they need to facilitate discussion in multilateral forums. 2. To enable a better alignment of the R&I activities among the individual EU members and international cooperation countries AND between the European Union and international cooperation countries by boosting synergies with international research and innovation programmes. This way the EU's role and scientific capabilities in the raw materials area will be

Raw materials for the energy supply of the future. Geology, markets, environmental influences; Rohstoffe fuer die Energieversorgung der Zukunft. Geologie, Maerkte, Umwelteinfluesse

Energy Technology Data Exchange (ETDEWEB)

Hagelueken, Christian [Umicore, Hanau-Wolfgang (Germany); Thauer, Rudolf K. [Max-Planck-Institut fuer Terrestrische Mikrobiologie, Marburg (Germany); Buchholz, Peter [Bundesanstalt fuer Geowissenschaften und Rohstoffe, Hannover (Germany). Deutsche Rohstoffagentur; Herzig, Peter [GEOMAR Helmholtz-Zentrum fuer Ozeanforschung Kiel (Germany); Gutzmer, Jens [Technische Univ. Bergakademie Freiberg (Germany); Helmholtz-Institut Freiberg fuer Ressourcentechnologie (Germany); Littke, Ralf [Rheinisch-Westfaelische Technische Hochschule (RWTH), Aachen (Germany); Angerer, Gerhard; Wellmer, Friedrich-Wilhelm

2015-11-15

More and more metals are needed to expand modern energy technologies, but we can not completely dispense with fossil raw materials and biomass in the near future either. Are the incidence of the conversion of energy sources sufficient? The analysis of the academy project ''Energy Systems of the Future'' (ESYS) comes to the conclusion that geologically enough raw materials are available. The challenge, however, is to make the supply safe, affordable and environmentally and socially compatible. The analysis explains the mechanisms of action on the global commodity markets and identifies supply risks. These include, for example, sudden demand on the international markets as well as the unequal distribution of the world's raw material reserves. This is followed by the analysis approaches, in order to recognize warning signals for potential raw material bottlenecks in time, to develop evasive strategies and to secure the raw material supply for the energy turnarounds. For example, the expansion of recycling can help to reduce the dependence on metal imports. In mining, on the other hand, innovative technologies have to be developed in order to improve the exploration and utilization of the deposits. By establishing binding environmental and social standards, the extraction of raw materials could also become more sustainable. The analysis also highlights the importance of bioenergy and fossil raw materials, such as oil and natural gas, for energy generation. The authors describe the advantages and disadvantages of these energy carriers and the measures that can be used to reduce environmental pollution such as greenhouse gas emissions. [German] Fuer den Ausbau moderner Energietechnologien werden immer mehr Metalle benoetigt, doch auch auf fossile Rohstoffe und Biomasse koennen wir in naher Zukunft nicht vollstaendig verzichten. Reichen die Vorkommen zur Umsetzung der Energiewende aus? Die Analyse des Akademienprojekts &apos

Raw materials in the manufacture of biotechnology products: regulatory considerations.

Science.gov (United States)

Cordoba-Rodriguez, Ruth

2010-01-01

The Food and Drug Administration's Pharmaceutical cGMPs for the 21st Century initiative emphasizes science and risk-based approaches in the manufacture of drugs. These approaches are reflected in the International Conference on Harmonization (ICH) guidances ICH Q8, Q9, and Q10 and encourage a comprehensive assessment of the manufacture of a biologic, including all aspects of manufacture that have the potential to affect the finished drug product. Appropriate assessment and management of raw materials are an important part of this initiative. Ideally, a raw materials program should strive to assess and minimize the risk to product quality. With this in mind, risk-assessment concepts and control strategies will be discussed and illustrated by examples, with an emphasis on the impact of raw materials on cell substrates. Finally, the life cycle of the raw material will be considered, including its potential to affect the drug product life cycle. In this framework, the supply chain and the vendor-manufacturer relationship will be explored as important parts of an adequate raw materials control strategy.

Traceability System Model for Quality Gelatin Raw Material of Cattle Hides

Directory of Open Access Journals (Sweden)

S Nur

2010-09-01

Full Text Available Several criteria must be accomplished within the provision of quality products in terms of the types of materials, the processing methods and effort to get it. Traceability system involves various parties that have different needs and goals in the process of supplying raw materials. Hence, there is a need for institutional systems engineering that can organize and manage the tracking process, the procurement of raw materials that guarantee the origin of gelatin raw materials, and facilitate the industry and customer to create a standardized quality of product. The purpose of the study formulates the institutional tracking models of gelatin raw material from cattle hide based on various criteria and assessment of the expert opinion. The methods used in this study were Interpretative structural modeling to formulate a representation of institutional tracking efficiently and analytical hierarchy process to determine the tracking strategy of industrial gelatin raw materials from cowhide. The results obtained from the study were some key elements of institutional tracking model for industrial gelatin raw materials from cowhide and the traceability strategies for industrial raw materials from cattle hide gelatin Indonesia. (Animal Production 12(3: 190-198 (2010 Key Words: traceability, institutional model, cattle hide, gelatin

Strategic raw materials. Risk management; Strategische Rohstoffe. Risikovorsorge

Energy Technology Data Exchange (ETDEWEB)

Bertau, Martin [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Technische Chemie; Gutzmer, Jens [Helmholtz-Institut fuer Ressourcentechnologie Freiberg (Germany); Matschullat, Joerg (ed.) [Technische Univ. Bergakademie Freiberg (Germany). Interdisziplinaeres Oekologisches Zentrum (IOeZ); Kausch, Peter

2014-07-01

This volume is divided into four chapters: (1) Raw material management, (2) Primary raw materials, (3) Secondary raw materials and recycling, (4). Processing and products. The topics for the chapter ''Raw material management'' are: Substitution of raw materials - framework conditions and implementation; Thales: Strategic raw materials; Time for cooperation between the EU and China in raw materials policy; Availability of elements for the semiconductor industry; Market price risks of raw material-intensive companies - identification and management. The topics on the second item ''Primary raw materials'' are: The supply of economic-critical raw materials - A search and analysis for causes; Lithium extraction from primary raw materials - state and perspectives; The global market of rare earths - A balancing act; Rare earth deposits in Namibia; New technologies in exploration and discovery - Focus on activities in Europe. The third chapter, ''Secondary Raw Materials and Recycling'', covered the topics: Technology metals - Systemic Requirements along the recycling chain; Integrated re-use of high-tech and greentech wastes; From the sewage sludge ash to the phosphorus fertilizer RecoPhos P38 in the stress field of waste, fertilizer and soil protection. In chapter 4. ''Processing and products'' are the topics: Treatment and processing of rare earth metals; Processing of mineral resources - opportunities and challenges; Consequences of modern germanium chemistry; Strategic resources - Risk management. A review and outlook with a pinch of fantasy.. [German] Dieser Band gliedert sich in vier Kapitel: (1) Rohstoffwirtschaft, (2) Primaere Rohstoffe, (3) Sekundaere Rohstoffe und Recycling,(4). Verarbeitung und Produkte. Die Themen zum Kapitel ''Rohstoffwirtschaft'' sind: Substitution von Rohstoffen - Rahmenbedingungen und Umsetzung; Thales: Strategische Rohstoffe; Zeit fuer

Raw material versus processing

International Nuclear Information System (INIS)

Berg, E.A.T.

1989-01-01

Some brazilian aspects related with the obtainment of raw materials for advanced ceramic products are described. The necessity of import raw materials by the advanced ceramic industries is mentioned, generating dangerous depedence for the country. The brazilian mineral reserves for using in raw materials of advanced ceramic are also cited. (C.G.C.) [pt

Comparison of Biochars Characteristics from Different Raw Materials

OpenAIRE

SUN Tao; ZHU Xin-ping; LI Dian-peng; GU Zhu-yu; ZHANG Jia-xi; JIA Hong-tao

2017-01-01

Biochar is the carbon-rich product from biomass under limited supply of oxygen. Biochar has been well recognized in enhancing terrestrial carbon sequestration and greenhouse gas mitigation as well as in improving soil fertility and plant productivity. To explore the differences of biochars produced from different raw materials, six biochar samples made from alfalfa straw, wheat straw, cotton straw, grape vines, sludge and lignite were selected as test material. Qualitative and quantitative an...

Lime kiln dust as a potential raw material in portland cement manufacturing

Science.gov (United States)

Miller, M. Michael; Callaghan, Robert M.

2004-01-01

In the United States, the manufacture of portland cement involves burning in a rotary kiln a finely ground proportional mix of raw materials. The raw material mix provides the required chemical combination of calcium, silicon, aluminum, iron, and small amounts of other ingredients. The majority of calcium is supplied in the form of calcium carbonate usually from limestone. Other sources including waste materials or byproducts from other industries can be used to supply calcium (or lime, CaO), provided they have sufficiently high CaO content, have low magnesia content (less than 5 percent), and are competitive with limestone in terms of cost and adequacy of supply. In the United States, the lime industry produces large amounts of lime kiln dust (LKD), which is collected by dust control systems. This LKD may be a supplemental source of calcium for cement plants, if the lime and cement plants are located near enough to each other to make the arrangement economical.

Present and future trends in pellet markets, raw materials, and supply logistics in Sweden and Finland

International Nuclear Information System (INIS)

Selkimaeki, Mari; Mola-Yudego, Blas; Roeser, Dominik; Prinz, Robert; Sikanen, Lauri

2010-01-01

Wood pellets have become an important fuel in heat and power production, and pellet markets are currently undergoing rapid development. In this paper, the pellet markets, raw materials and supply structures are analyzed for Sweden and Finland, based on a database of the current location and production capacity of the pellet producers, complemented with existing reports and literature. In Sweden, a total of 94 pellet plants/producers were identified, producing 1.4 million tonnes of pellets, while the domestic consumption was 1.7 million tonnes, and about 400,000 t of pellets were imported to fulfil the demand in 2007. In Finland, 24 pellet plants/producers were identified and the production was around 330,000 t while the domestic consumption was 117,000 t in 2007. In Finland, pellet market has been long time export oriented, whereas domestic consumption has been growing mainly in the small scale consumer sector, estimated 15,000 households had pellet heating systems in 2008. In the future, the increasing number of pellet users will require a reliable delivery network and good equipment for bulk pellet deliveries. Provision of new raw materials and ensuring the good quality of pellets through the whole production, delivery and handling chain will be fundamental in order to increase the use of pellets and sustain the ability to compete with other fuels. (author)

Tracing and control of raw materials sourcing for vaccine manufacturers.

Science.gov (United States)

Faretra Peysson, Laurence

2010-05-01

The control of the raw materials used to manufacture vaccines is mandatory; therefore, a very clear process must be in place to guarantee that raw materials are traced. Those who make products or supplies used in vaccine manufacture (suppliers of culture media, diagnostic tests, etc.) must apply quality systems proving that they adhere to certain standards. ISO certification, Good Manufacturing Practices for production sites and the registration of culture media with a 'Certificate of Suitability' from the European Directorate for the Quality of Medicines and Healthcare are reliable quality systems pertaining to vaccine production. Suppliers must assure that each lot of raw materials used in a product that will be used in vaccine manufacture adheres to the level of safety and traceability required. Incoming materials must be controlled in a single 'Enterprise Resource Planning' system which is used to document important information, such as the assignment of lot number, expiration date, etc. Ingredients for culture media in particular must conform to certain specifications. The specifications that need to be checked vary according to the ingredient, based on the level of risk. The way a raw material is produced is also important, and any aspect relative to cross-contamination, such as the sanitary measures used in producing and storing the raw material must be checked as well. In addition, suppliers can reduce the risk of viral contamination of raw materials by avoiding purchases in countries where a relevant outbreak is currently declared. 2010 The International Association for Biologicals. Published by Elsevier Ltd. All rights reserved.

Analysis of Cement as Raw Material Inventory on Ready Mix Production Unit at PT. Perdana Beton in Samarinda

OpenAIRE

Wahyuni, Novita Eka

2014-01-01

This study aims to identify and analyze the optimal amount of cement supplies in PT. Perdana Beton In Samarinda. Formulation of the problem in this study is whether the supply of cement as raw material for Ready Mix at PT. Perdana Beton In Samarinda already minimizing the cost of inventory cement. The hypothesis in this study is: '' Allegedly cement as raw material supplies ready mix at PT. Perdana Beton In Samarinda not provide minimum inventory costs'. Basic...

International symposium on uranium production and raw materials for the nuclear fuel cycle - Supply and demand, economics, the environment and energy security. Extended synopses

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

The IAEA periodically organizes nical meetings and international symposia on all areas of the uranium production cycle. This publication contains 160 extended synopses related to the 2005 international symposium on 'Uranium Production and Raw Materials for the Nuclear Fuel Cycle - Supply and Demand, Economics, the Environment and Energy Security'. They cover all areas of natural uranium resources and production cycle including uranium supply and demand; uranium geology and deposit; uranium exploration; uranium mining and milling; waste management; and environment and regulation. Each synopsis was indexed individually.

Raw material uranium

International Nuclear Information System (INIS)

Arnold, O.

1975-01-01

In this paper some aspects are being considered, in as far as they can contribute to a better understanding of uranium as a raw material and an energy carrier, and as they can indicate the possible ways and means open to the German Federal Republic for securing this highly desirable raw material, without becoming even more dependent on the economic and political views of the producing countries, than it is the case in respect of oil. (orig.) [de

Use of raw materials in the United States from 1900 through 2014

Science.gov (United States)

Matos, Grecia R.

2017-08-22

The economic growth of an industrialized nation such as the United States requires raw materials for construction (buildings, bridges, highways, and so forth), defense, and processing and manufacture of goods and services. Since the beginning of the 20th century, the types and quantities of raw materials used have increased and changed significantly. This fact sheet quantifies the amounts of raw materials (other than food and fuel) that have been used in the U.S. economy annually for a period of 115 years, from 1900 through 2014. It provides a broad overview of the quantity (weight) of nonfood and nonfuel materials used in the economy and illustrates the use and significance of raw nonfuel minerals in particular as building blocks of society.These data have been compiled to help the public and policymakers understand the changing annual flow of raw materials put into use in the United States. Such information can be helpful in assessing the potential effects of materials use on the environment, assessing materials’ intensity of use, and examining the role that these materials play in the economy. The data presented indicate the substitution and shift in materials usage from renewable to nonrenewable materials during the 20th century. The disaggregated quantities by commodity (not shown in this fact sheet) may be tested against supply adequacy and end of life issues.

Reuse and recovery of raw materials: Towards the achievement of a resource-efficient society

International Nuclear Information System (INIS)

Brunori, Claudia; Cutaia, Laura; Norabito, Roberto

2015-01-01

Resource efficiency plays a key role in the transition from a linear to a circular economy system. During the last few decades a rapid growth in the number of materials used across complex products has occurred. Given the high economic importance of critical raw materials combined with relatively high supply risk, securing reliable and undistorted access of certain raw materials is of growing concern across the globe. Development of eco-innovative approaches devoted to closing the loop of resources is strongly needed, allowing the connection between production cycles and their territory.

Method for selecting raw materials to preparing ceramic masses: application to raw material for red ceramic

International Nuclear Information System (INIS)

Moreno, Maria Margarita Torres; Rocha, Rogers Raphael da; Zanard, Antenor

2012-01-01

We studied the raw materials used in a factory building blocks, located in Cesario Lange city (SP). It extracts raw materials from various sources in the region to make the dough. The mixtures were prepared from dry milled powders based on data related to the plasticity of the raw materials. It was obtained with the apparatus Vicat-cone in order to obtain similar levels of water absorption of the samples burned at 900 deg C for all compositions. To quantify the proportion of each clay was used the Lever Rule. In this firing temperature, where sintering is mainly by diffusion from a solid state, different compositions of the same set of four raw materials resulted in similar values. (author)

Biotechnologies for critical raw material recovery from primary and secondary sources: R&D priorities and future perspectives.

Science.gov (United States)

Hennebel, Tom; Boon, Nico; Maes, Synthia; Lenz, Markus

2015-01-25

Europe is confronted with an increasing supply risk of critical raw materials. These can be defined as materials of which the risks of supply shortage and their impacts on the economy are higher compared to most of other raw materials. Within the framework of the EU Innovation Partnership on raw materials Initiative, a list of 14 critical materials was defined, including some bulk metals, industrial minerals, the platinum group metals and rare earth elements. To tackle the supply risk challenge, innovation is required with respect to sustainable primary mining, substitution of critical metals, and urban mining. In these three categories, biometallurgy can play a crucial role. Indeed, microbe-metal interactions have been successfully applied on full scale to win materials from primary sources, but are not sufficiently explored for metal recovery or recycling. On the one hand, this article gives an overview of the microbial strategies that are currently applied on full scale for biomining; on the other hand it identifies technologies, currently developed in the laboratory, which have a perspective for large scale metal recovery and the needs and challenges on which bio-metallurgical research should focus to achieve this ambitious goal. Copyright © 2013. Published by Elsevier B.V.

Taking the Step towards a More Dynamic View on Raw Material Criticality: An Indicator Based Analysis for Germany and Japan

Directory of Open Access Journals (Sweden)

Simon Glöser-Chahoud

2016-12-01

Full Text Available Due to mounting concerns about the security of raw material supplies, numerous studies dealing with the quantification of supply risks and material criticality at the national level have been carried out in previous years. Regarding these studies, most approaches are indicator based static screening methods analyzing large numbers of raw materials and identifying those which are most critical for an economy. The majority of these screening methods quantify supply risks and vulnerabilities for one base year without taking into account temporal changes. Dynamic approaches for specific raw materials analyzing affected value chains in detail have been introduced recently; however, these studies do not intend to provide a screening of larger numbers of commodities. In this paper, we present a simple dynamic screening approach to assess raw material criticality at the country level building upon methods from innovation economics. The indicators applied in this study are only based on broadly available production and trade data, which makes this approach relatively easy to apply. We test our methodology on the example of Germany and Japan—two economies with highly specialized industries and low domestic raw material deposits, and, hence, high import dependency. The results are comparable to those of previously conducted multi indicator based static screening methods. However, they provide additional insight into temporal developments over the previous decade.

WATER-JET CUTTING MACHINE NOW AVAILABLE FROM THE CERN RAW MATERIALS STORES

CERN Multimedia

2007-01-01

The CERN Raw Materials Stores has recently acquired a new water-jet cutting machine. The machine is capable of cutting all types and shapes of materials up to 70 mm in thickness, with an accuracy of +/- 0.1mm/m. For the time being, users requiring materials to be cut should supply drawings in DXF, DWG or IGES (AutoCad) file format. The machine will be operational as of 1st October 2007. The Stores Team Paulo Dos Santos FI-LS-MM 72308

Supply optimization for the production of raw sugar

DEFF Research Database (Denmark)

Grunow, Martin; Günther, H.O.; Westinner, R.

2007-01-01

Based on a case study from Venezuela, the production of raw sugar is investigated. Ideally, sugar mills operate at a constant production rate. However, safety stocks of the raw material cannot be maintained as sugar cane quality deteriorates very rapidly. Sugar cane is therefore continuously...

1996 Progress report on energies and raw materials; 1996 rapport d`activite energies et matieres premieres

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

The 1996 annual progress report, from the French Department of Energy, reviews the key points of the French policy for energy and raw materials: competitiveness, environmental protection, long term supply safety, and public service. 1996 was marked by positive results for the French energy industry, difficulties for the oil refining industry, and a new impetus for renewable energies. Five surveys are presented: nuclear safety in Eastern Europe, the european directive on electric power domestic market, evolution of the oil market, conditions of refining in France, and restructuring of the Mine bureau (BRGM). 40 prominent facts are briefly reviewed, concerning sustainable energy development, nuclear energy, electric power and gas, coal, oil products, raw materials. Diagrams on energy and raw materials are also included

1996 Progress report on energies and raw materials; 1996 rapport d`activite energies et matieres premieres

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

The 1996 annual progress report, from the French Department of Energy, reviews the key points of the French policy for energy and raw materials: competitiveness, environmental protection, long term supply safety, and public service. 1996 was marked by positive results for the French energy industry, difficulties for the oil refining industry, and a new impetus for renewable energies. Five surveys are presented: nuclear safety in Eastern Europe, the european directive on electric power domestic market, evolution of the oil market, conditions of refining in France, and restructuring of the Mine bureau (BRGM). 40 prominent facts are briefly reviewed, concerning sustainable energy development, nuclear energy, electric power and gas, coal, oil products, raw materials. Diagrams on energy and raw materials are also included

The Supply Chain System of Cassava on the Tapioca Industry

OpenAIRE

Hardoyo,; Safrudin, Ahmad; Komara, Ahmad

2013-01-01

The quantity, quality and continueity guarantee of raw material supply is a one of define factor for the succesfull of production process. To solve the problems of raw material supply on tapioca industry, it is important to develop a correct raw material supply management. That management must be accurate on quantity, quality, continuity and price. One of the developed management is supply chain managementThe purpose of this paper is to make a cassava raw material supply chain on 100 ton prod...

Quality quantification model of basic raw materials

Directory of Open Access Journals (Sweden)

Š. Vilamová

2016-07-01

Full Text Available Basic raw materials belong to the key input sources in the production of pig iron. The properties of basic raw materials can be evaluated using a variety of criteria. The essential ones include the physical and chemical properties. Current competitive pressures, however, force the producers of iron more and more often to include cost and logistic criteria into the decision-making process. In this area, however, they are facing a problem of how to convert a variety of vastly different parameters into one evaluation indicator in order to compare the available raw materials. This article deals with the analysis of a model created to evaluate the basic raw materials, which was designed as part of the research.

Methodology for Evaluating Raw Material Changes to RSRM Elastomeric Insulation Materials

Science.gov (United States)

Mildenhall, Scott D.; McCool, Alex (Technical Monitor)

2001-01-01

The Reusable Solid Rocket Motor (RSRM) uses asbestos and silicon dioxide filled acrylonitrile butadiene rubber (AS-NBR) as the primary internal insulation to protect the case from heat. During the course of the RSRM Program, several changes have been made to the raw materials and processing of the AS-NBR elastomeric insulation material. These changes have been primarily caused by raw materials becoming obsolete. In addition, some process changes have been implemented that were deemed necessary to improve the quality and consistency of the AS-NBR insulation material. Each change has been evaluated using unique test efforts customized to determine the potential impacts of the specific raw material or process change. Following the evaluations, the various raw material and process changes were successfully implemented with no detectable effect on the performance of the AS-NBR insulation. This paper will discuss some of the raw material and process changes evaluated, the methodology used in designing the unique test plans, and the general evaluation results. A summary of the change history of RSRM AS-NBR internal insulation is also presented.

Map of critical raw material deposits in Europe

Science.gov (United States)

Guillaume, Bertrand

2016-04-01

common interoperable EU Geological Knowledge Base. Such a Knowledge Base will support exploration for indigenous mineral resources and strengthen policy and decision making. In 2010, the European Commission identified 14 non energy non-agricultural raw materials as being critical. Criticality is based on both the scarcity of supply and the importance to European industry. This list was updated in 2014 to include 7 new commodities with one being dropped from the original list. The list now comprises: antimony, beryllium, borates, chromium, cobalt, coking coal, fluorspar, gallium, germanium, graphite, indium, magnesite, magnesium, niobium, phosphate rock, platinum group metals, light and heavy rare earth elements (separately), silicon metal and tungsten. ProMine was a European Union (EU) co-funded project, which had as its main objective the stimulation of the extractive industry to deliver new products to manufacturing industry. A major deliverable of the project was the ProMine Mineral Deposit (MD) database that contains information related to almost 13,000 mineral deposits in Europe. In order to extract data to be displayed on the CRM map of Europe, the ProMine MD database was queried for all commodities on the EC CRM list which were in the medium to super-large deposit size. Following this, the dataset was circulated to MREG in order to verify, validate and update the list.

Glucose from a cellulose-containing raw material

Energy Technology Data Exchange (ETDEWEB)

Feniksova, R V

1977-01-01

Glucose was produced by mixing the raw material with an enzyme and water, enzymic hydrolysis of raw material, and separation of the hydrolyzate. To increase the yield of glucose, the hydrolysis took place in 2 stages: at the 1st stage, the hydrolysis was continued until the mixture of glucose and oligosaccharides was obtained under the influence of an active enzyme (1 to 20 units/g of cellulose present in the raw material); at the 2nd stage, cellulase immobilized on an insoluble carrier (by covalent bonds) was used for the hydrolysis of oligosaccharides. The hydromodulus of the suspension of cellulose-containing raw material was maintained 5 to 30. A carrier nonhydrolyzable by cellulase, for instance a homogenious macroporous Aerosil gel, a porous glass, or porous ceramics, was used.

Long term assurance of supply of raw materials

International Nuclear Information System (INIS)

1978-01-01

The working group discussed the long-term assurance of uranium supply. A number of key questions is presented along with the answers given by representatives of 10 countries and by EC commission. Emphasis is laid on market stability and on the difficulties in adopting to sudden changes in the supply and demand situation

Investigation on pyrolysis of some organic raw materials

Directory of Open Access Journals (Sweden)

Purevsuren B

2017-02-01

Full Text Available We have been working on pyrolysis of some organic raw materials including different rank coals, oil shale, wood waste, animal bone, cedar shell, polypropylene waste, milk casein and characterization of obtained hard residue, tar and pyrolytic water and gas after pyrolysis. The technical characteristics of these organic raw materials have been determined and the thermal stability characteristics such as thermal stability indices (T5% and T25% determined by using thermogravimetric analysis. The pyrolysis experiments were performed at different heating temperatures and the yields of hard residue, tar, pyrolysis water and gaseous products were determined and discussed. The main technical characteristics of hard residue of organic raw materials after pyrolysis have been determined and the adsorption ability of pyrolysis hard residue and its activated carbon of organic raw materials also determined. The pyrolysis tars of organic raw materials were distilled in air condition and determined the yields of obtained light, middle and heavy fractions and bitumen like residue with different boiling temperature. This is the first time to investigate the curing ability of pyrolysis tars of organic raw materials for epoxy resin and the results of these experiments showed that only tar of milk casein has the highest (95.0%, tar of animal bone has certain (18.70% and tars of all other organic raw materials have no curing ability for epoxy resin.

Ethanol is a strategic raw material

Directory of Open Access Journals (Sweden)

Baras Josip K.

2002-01-01

Full Text Available The first part of this review article considers general data about ethanol as an industrial product, its qualities and uses. It is emphasized that, if produced from biomass as a renewable raw material, its perspectives as a chemical raw material and energent are brilliant. Starchy grains, such as corn, must be used as the main raw materials for ethanol production. The production of bioethanol by the enzyme-catalyzed conversion of starch followed by (yeast fermentation, distillation is the process of choice. If used as a motor fuel, anhydrous ethanol can be directly blended with gasoline or converted into an oxygenator such as ETBE. Finally, bioethanol production in Yugoslavia and the possibilities for its further development are discussed.

Raw material utilization in slaughterhouses – optimizing expected profit using mixed-integer programming

DEFF Research Database (Denmark)

Jensen, Toke Koldborg; Kjærsgaard, Niels Christian

Slaughterhouses are major players in the pork supply chain, and supply and demand must be matched in order to generate the highest profit. In particular, carcasses must be sorted in order to produce the “right” final products from the “right” carcasses. We develop a mixed-integer programming (MIP) ...... at slaughterhouses. Finally, we comment on the expected effect of variations in the raw material supply and the demand as well as future research concerning joint modelling of supply chain aspects.......Slaughterhouses are major players in the pork supply chain, and supply and demand must be matched in order to generate the highest profit. In particular, carcasses must be sorted in order to produce the “right” final products from the “right” carcasses. We develop a mixed-integer programming (MIP...

VERAM - Vision and Roadmap for European Raw Materials

Science.gov (United States)

Baumgarten, Wibke; Vashev, Boris

2017-04-01

The overall objective of VERAM project is to produce a Vision and Roadmap for European Raw Materials in 2050 based on raw materials research and innovation (R&I) coordination. Two leading European Technology Platforms (ETPs): ETP SMR (Sustainable Minerals Resources) and FTP (Forest Technology Platform) are joining forces to develop a common vison and roadmap with the support of ECTP (European Construction Technology Platform), represented by UNIVPM, SusChem (ETP for Sustainable Chemistry), represented by Cefic, EuMaT (Advanced Materials ETP), represented by VITO, ERAMIN 2, represented by Research Centre JUELICH and WoodWisdom Network Plus represented by the Agency for Renewable Resources (FNR). This partnership provides VERAM with expertise from downstream applications and additional knowledge on non-biotic and biotic raw materials. The project encourages capacity building as well as transfer of knowledge. It expects to provide an innovation reference point for the European Institute of Innovation & Technology (EIT) Raw Materials (formerly the KIC Raw MatTERS), to coordinate the network involved in the European Innovation Partnership (EIP) on Raw Materials Commitments and relevant proposals funded under Horizon 2020. It provides a platform for identifying gaps and complementarities and enables their bridging. VERAM will be able to advise the European Commission and Member States on future research needs and policies to stimulate innovation and assist in overcoming fragmentation in the implementing the EIP Raw Materials Strategic Implementation Plan. VERAM looks for mutually beneficial information exchange, encourages cross-fertilization between actions undertaken by different raw material industries, and expects to accelerate exploitation of breakthrough innovations. One of the main outcomes of the project is the presentation of a common long term 2050 Vision and Roadmap for relevant raw materials including metals, industrial minerals and aggregates and wood. The

Raw materials problems in connection with fast breeder type reactors

International Nuclear Information System (INIS)

Hirsch, H.; Kreusch, J.

1981-01-01

The power supply by the FBR type reactors which depends upon the availability of essential raw materials such as Cr and Mo for structural and special steels is supposed to be less ensured than supply by fossil-fueled power plants. This contribution tries to verify this statement by means of estimates of the annual Cr and Mo demand, of the resources, production and consumption as well as by a study of the possibilities of recycling and substituting Cr and Mo. The only realistic alternative to the fast breeder type reactor is supposed to be a soft path of development according to the principle of decentralization, utilization of renewable energy sources regard to environmental protection, and use of less sophisticated technology. (DG) [de

Derivation of general expression for variance in difference in the contents of active ingredient in raw material as determined at seller's and purchaser's site

International Nuclear Information System (INIS)

Narasimha Murty, B.; Prahlad, B.

2012-01-01

Material supply from a supplier to purchaser involve weighing of the material at both the sites. It is always of interest to know whether there is any difference in the weight of the material and more importantly in the weight of the active ingredient supplied and received. This paper describes the derivation of general expression for variance in difference in the contents of active ingredient in raw material as determined at the seller's and purchaser's site. The derived expression for the variance in difference in the content of active ingredient as determined at seller's and purchaser's site is a generic one though its application is demonstrated for two raw materials

PERSPECTIVE NONMETALLIC RAW MATERIALS AND THEIR UTILIZATION

Directory of Open Access Journals (Sweden)

Havelka Jaroslav

1997-10-01

Full Text Available It is the existence of the domestic base of raw materials and stable or growing markets that are a precondition for the prospectiveness industrial minerals. Traditional and non-traditional prospective nonmetal-liferous raw materials can be distinguished. The main trends in new industrial applications of industrial minerals are being stated. In the Czech Republic, the following may be ranked among the traditional prospective nonme-talliferous raw materials: kaoline, refractory clays, ceramic and expandable clays, glass and foundry sands, li-mestones, building stones, gypsum, cast basalt, bentonite, diatomite, feldspars, graphite. Alkali rocks, industrial garnets, flaky mica, wollastonite and yet unmined staurolite, minerals of the sillimanite group and others belong to the non-traditional prospective industrial minerals.

Study on Utilization of an Artesian Well as a Source of Water Supply at Raw Water Backup System (GBA01)

International Nuclear Information System (INIS)

Santosa Pujiarta; Yuyut Suraniyanto; Amril; Setyo Budi Utomo

2012-01-01

Raw water supply system (GBA01) is a unit of ponds used as a provider of raw water for secondary cooling system and free mineral water production systems. Source of raw water pond has been supplied from PAM Puspiptek with water conductivity between 126-310 μS / cm and a pH of 6 to 8, and this condition is maintained because there is no other source that is used to supply water to the reactor cooling water supply. This conductivity is always unstable, if during the dry season the conductivity is low trend, but in the rainy season the conductivity will be increase because the water contains a lot of mud. And one more problem that is important is if the PAM Puspiptek failed to supply fresh water to the reactor. So to handling and anticipate these things, necessary to optimize the deep well former Interatom legacy as a backup water supply for raw water supply system of the reactor. With a conductivity of 136 μS / cm, pH 7,4 and total hardness 37 ppm, the water from deep wells can be used as a backup supply of secondary raw water cooling system. (author)

Uninterrupted heat-treatment of starch raw materials

Energy Technology Data Exchange (ETDEWEB)

Bronshtein, D Z

1958-01-01

A setup is presented, with a Rekord grinder, a Khronos scale, and other equipment of Soviet manufacture, in which oats, rye, wheat, and other grains are treated at 42 to 45 degrees prior to their use as raw materials in the ethanol industry. These materials are analyzed with respect to H/sub 2/O, starch, bulk, weight, screen analysis, and the final ethanol yields/ton of such raw materials. In a three year run in plant, this heat-treatment was advantageous, as compared to the former treatment of the starch materials.

Uninterrupted heat-treatment of starch raw materials

Energy Technology Data Exchange (ETDEWEB)

Bronshtein, D Z

1958-01-01

A setup is presented, with a Rekord grinder, a Khronos scale, and other equipment of Soviet manufacture, in which oats, rye, wheat, and other grains are treated at 42 to 45/sup 0/ prior to their use as raw materials in the ethanol industry. These materials are analyzed with respect to H/sub 2/O, starch, bulk weight, screen analysis, and the final ethanol yields/ton of such raw materials. In a three year run in a plant, this heat-treatment was advantageous, as compared to the former treatment of the starch materials.

Pellet production from agricultural raw materials - A systems study

Energy Technology Data Exchange (ETDEWEB)

Nilsson, Daniel; Bernesson, Sven; Hansson, Per-Anders [Department of Energy and Technology, Swedish University of Agricultural Sciences, P.O. Box 7032, SE-75007 Uppsala (Sweden)

2011-01-15

The demand for biofuel pellets has increased considerably in recent years, causing shortage of the traditional raw materials sawdust and wood shavings. In this study, the costs and energy requirements for the production of pellets from agricultural raw materials were analysed. The materials studied were Salix, reed canary grass, hemp, straw, screenings, rape-seed meal, rape cake and distiller's waste. Four production scales were analysed, having an annual output of 80,000, 8000, 800 and 80 tonnes of pellets per year. It was concluded that the raw materials of greatest interest were Salix and reed canary grass. They had competitive raw material costs and acceptable fuel properties and could be mixed with sawdust in existing large-scale pelleting factories. Straw had low production costs but can cause serious ash-related problems and should, as also is the case for screenings, be avoided in small-scale burners. Hemp had high raw material costs and is of less commercial interest, while distiller's waste, rape-seed meal and rape cake had higher alternative values when used as protein feed. The scale of production had a crucial influence on production costs. The machinery was used much more efficiently in large-scale plants, resulting in clear cost savings. Small-scale pelleting, both static and mobile, required cheap raw materials, low labour costs and long utilisation times to be profitable. In most cases, briquetting would be more commercially viable. The energy use in manufacturing pellets from air-dried crops was generally no higher than when moist sawdust was used as the raw material. (author)

Identification of Particles in Parenteral Drug Raw Materials.

Science.gov (United States)

Lee, Kathryn; Lankers, Markus; Valet, Oliver

2018-04-18

Particles in drug products are not good and are therefore regulated. These particles can come from the very beginning of the manufacturing process, from the raw materials. To prevent particles, it is important to understand what they are and where they come from so the raw material quality, processing, and shipping can be improved. Thus, it is important to correctly identify particles seen in raw materials. Raw materials need to be of a certain quality with respect to physical and chemical composition, and need to have no contaminants in the form of particles which could contaminate the product or indicate the raw materials are not pure enough to make a good quality product. Particles are often seen when handling raw materials due to color, size, or shape characteristics different from those in the raw materials. Particles may appear to the eye to be very different things than they actually are, so microscope, chemical, and elemental analyses are required for accuracy in proper identification. This paper shows how using three different spectroscopy tools correctly and together can be used to identify particles from extrinsic, intrinsic, and inherent particles. Sources of materials can be humans and the environment (extrinsic), from within the process (intrinsic), and part of the formulation (inherent). Microscope versions of Raman spectroscopy, laser-induced breakdown spectroscopy (LIBS), and IR spectroscopy are excellent tools for identifying particles because they are fast and accurate techniques needing minimal sample preparation that can provide chemical composition as well as images that can be used for identification. The micro analysis capabilities allow for easy analysis of different portions of samples so multiple components can be identified and sample preparation can be reduced. Using just one of these techniques may not be sufficient to give adequate identification results so that the source of contamination can be adequately identified. The

The use of rapid spectroscopic screening methods to detect adulteration of food raw materials and ingredients

DEFF Research Database (Denmark)

Sørensen, Klavs Martin; Khakimov, Bekzod; Engelsen, Søren Balling

2016-01-01

with chemometrics appears to be an efficient first choice for testing incoming raw materials and ingredients in the food production. However, in order to realize its full potential, it is necessary to move away from the current thoughts at the Parnassus, namely the targeted approach. This review will focus......International trade in food commodities will continue to increase and the complex food supply chains make adulteration detection and traceability a technical, logistical and financial challenge. There is no magic solution for adulteration testing, but NIR spectroscopy in combination...... on the exploitation of the capability of NIR spectroscopy to fingerprint incoming raw materials and ingredients as an integrated part of the industry's self-monitoring program typically called process analytical technology....

Sustainability evaluation of essential critical raw materials: cobalt, niobium, tungsten and rare earth elements

Science.gov (United States)

Tkaczyk, A. H.; Bartl, A.; Amato, A.; Lapkovskis, V.; Petranikova, M.

2018-05-01

The criticality of raw materials has become an important issue in recent years. As the supply of certain raw materials is essential for technologically-advanced economies, the European Commission and other international counterparts have started several initiatives to secure reliable and unhindered access to raw materials. Such efforts include the EU Raw Materials Initiative, European Innovation Partnership on Raw Materials, US Critical Materials Institute, and others. In this paper, the authors present a multi-faceted and multi-national review of the essentials for the critical raw materials (CRMs) Co, Nb, W, and rare earth elements (REEs). The selected CRMs are of specific interest as they are considered relevant for emerging technologies and will thus continue to be of increasing major economic importance. This paper presents a ‘sustainability evaluation’ for each element, including essential data about markets, applications and recycling, and possibilities for substitution have been summarized and analysed. All the presented elements are vital for the advanced materials and processes upon which modern societies rely. These elements exhibit superior importance in ‘green’ applications and products subject to severe conditions. The annual production quantities are quite low compared to common industrial metals. Of the considered CRMs, only Co and REE gross production exceed 100 000 t. At the same time, the prices are quite high, with W and Nb being in the range of 60 USD kg‑1 and some rare earth compounds costing almost 4000 USD kg‑1. Despite valiant effort, in practice some of the considered elements are de facto irreplaceable for many specialized applications, at today’s technological level. Often, substitution causes a significant loss of quality and performance. Furthermore, possible candidates for substitution may be critical themselves or available in considerably low quantities. It can be concluded that one preferred approach for the

7 CFR 58.332 - Segregation of raw material.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Segregation of raw material. 58.332 Section 58.332... Specifications for Dairy Plants Approved for USDA Inspection and Grading Service 1 Operations and Operating Procedures § 58.332 Segregation of raw material. The milk and cream received at the dairy plant shall meet...

The coupling of coal and nuclear energy for the long-term supply of energy and raw materials

International Nuclear Information System (INIS)

Knizia, K.

1986-10-01

In view of the limited world reserves of fossil fuels and the increase in demand to be expected because of the continued growth of the world population, coal and nuclear energy will have to make an increasing contribution to the energy supply. Their contribution will range from electricity generation to the heat sector and to the raw materials market via various gases obtained from them. The further development towards this field of tasks will lead first via the gasification of coal. It will be carried out autothermally in the first stage of development. The gas produced is suitable for realising considerable improvements in efficiency as compared to coal-fired power stations of present-day design since it will permit the generation of electricity via combined gas turbine/steam turbine processes. Efforts are being made to take further the processes based on this technology by introducing a sodium circuit in addition to the coal gasification, which will make it possible to keep the plants required for coal gasification small. In later stages, this technology will also be suitable for producing a considerable improvement in the diversion of heat at high temperatures from high-temperature reactor nuclear power stations for several purposes. (author)

Raw materials for aluminium production

International Nuclear Information System (INIS)

Galushkin, N.V.

1995-01-01

This chapter of monograph is devoted to to raw materials which used in aluminium production. Therefore, the using of alumina, and fluoride salts in aluminium production was considered. The physical properties of alumina were studied.

Insulating materials from renewable raw materials. 4. ed.; Daemmstoffe aus nachwachsenden Rohstoffen

Energy Technology Data Exchange (ETDEWEB)

Brandhorst, Joerg; Spritzendorfer, Josef; Gildhorn, Kai; Hemp, Markus

2012-03-27

The thermal insulation has become a central issue in the construction and renovation of buildings. The question of healthy building materials and appropriate construction follows the desire of a comfartable and allergy-free living. Due to these developments, insulation materials from renewable resources increasingly has raised the consciousness. The brochure under consideration describes the dynamic market of insulation materials consisting of renewable raw materials. Wood fibers, wood wool, sheep wool, flax, hemp, reeds, meadow grass, cork, cellulose, seaweed and bulrushes are considered as renewable raw materials for insulating materials.

Plastic raw materials in Neolithic pottery production

Directory of Open Access Journals (Sweden)

Alexander A. Bobrinsky

2012-12-01

Full Text Available The paper is dedicated to the investigation of various natural silts as the most ancient type of raw material used in pottery production. The authors describe the specific features of the composition of plain and mountain silts, and discover the same features in ancient ceramics from different regions in Russia. It can be concluded that silts were the earliest raw material used, a tradition that faded away during the evolution of pottery production.

Annual report 2001. General direction of energy and raw materials

International Nuclear Information System (INIS)

2001-01-01

This report summarizes the 2001 activity of the French general direction of energy and raw materials (DGEMP) of the ministry of finances and industry: 1 - security of energy supplies: a recurrent problem; 2001, a transition year for nuclear energy worldwide; petroleum refining in font of the 2005 dead-line; the OPEC and the upset of the oil market; the pluri-annual planning of power production investments; renewable energies: a reconfirmed priority; 2 - the opening of markets: the opening of French electricity and gas markets; the international development of Electricite de France (EdF) and of Gaz de France (GdF); electricity and gas industries: first branch agreements; 3 - the present-day topics: 2001, the year of objective contracts; AREVA, the future to be prepared; the new IRSN; the agreements on climate and the energy policy; the mastery of domestic energy consumptions; the safety of hydroelectric dams; Technip-Coflexip: the birth of a para-petroleum industry giant; the cleansing of the mining activity in French Guyana; the future of workmen of Lorraine basin coal mines; 4 - 2001 at a glance: highlights; main legislative and regulatory texts; 5 - DGEMP: November 2001 reorganization and new organization chart; energy and raw materials publications; www.industrie.gouv.fr/energie. (J.S.)

Analytical techniques for characterization of raw materials in cell culture media

Directory of Open Access Journals (Sweden)

Sharma Chandana

2011-11-01

Full Text Available Abstract Raw materials are a critical part of any cell culture medium; therefore, it is of utmost importance to understand and characterize them for high-quality product. The raw material characterization (RMC program at SAFC focuses on individual screening of raw materials both analytically and biologically. The goal of the program is to develop the best-in-class knowledge base of the raw materials used in SAFC’s media formulations and their impact on performance of products.

Order acceptance in food processing systems with random raw material requirements

NARCIS (Netherlands)

Kilic, Onur A.; van Donk, Dirk Pieter; Wijngaard, Jacob; Tarim, S. Armagan

This study considers a food production system that processes a single perishable raw material into several products having stochastic demands. In order to process an order, the amount of raw material delivery from storage needs to meet the raw material requirement of the order. However, the amount

Determination Of Work Indexes Of Basic Ceramic Raw Materials

OpenAIRE

İPEK, Halil; UÇBAŞ, Yaşar

2017-01-01

In this study, the grindability of basic ceramic raw materials have been investigated by using Bond grindability test and the results have been compared. Bond grindability test results show that work indexes of raw materials are dependent on their hardnesses.

Conception for the protection of mineable raw materials in the Land of Brandenburg (Germany)

International Nuclear Information System (INIS)

Kopf, M.

1995-01-01

The pit and quarry industry in Brandenburg will within a few years the same importance as the lignite industry. Both industries together may have up to 20 000 employees beyond the year 2000. The same number of employees could result in the enterprises of local and other subcontractors and mine suppliers. The government of Brandenburg creates at present the legal prerequisites to secure the supply with mineable raw materials. The regulation of the protection of mineable raw materials is proposed to be realised within the scope of the second plan for the development of the country, and within the regional plannings. The protection of the basic conditions for mining industries is a permanent task for administration and politics. By encouraged engagement in the case of opposed interests, those of mining can be considered with acceptable results provided the parties are ready to compromise. (orig.) [de

Estimating raw material equivalents on a macro-level: comparison of multi-regional input-output analysis and hybrid LCI-IO.

Science.gov (United States)

Schoer, Karl; Wood, Richard; Arto, Iñaki; Weinzettel, Jan

2013-12-17

The mass of material consumed by a population has become a useful proxy for measuring environmental pressure. The "raw material equivalents" (RME) metric of material consumption addresses the issue of including the full supply chain (including imports) when calculating national or product level material impacts. The RME calculation suffers from data availability, however, as quantitative data on production practices along the full supply chain (in different regions) is required. Hence, the RME is currently being estimated by three main approaches: (1) assuming domestic technology in foreign economies, (2) utilizing region-specific life-cycle inventories (in a hybrid framework), and (3) utilizing multi-regional input-output (MRIO) analysis to explicitly cover all regions of the supply chain. While the first approach has been shown to give inaccurate results, this paper focuses on the benefits and costs of the latter two approaches. We analyze results from two key (MRIO and hybrid) projects modeling raw material equivalents, adjusting the models in a stepwise manner in order to quantify the effects of individual conceptual elements. We attempt to isolate the MRIO gap, which denotes the quantitative impact of calculating the RME of imports by an MRIO approach instead of the hybrid model, focusing on the RME of EU external trade imports. While, the models give quantitatively similar results, differences become more pronounced when tracking more detailed material flows. We assess the advantages and disadvantages of the two approaches and look forward to ways to further harmonize data and approaches.

Aerospace Fuels From Nonpetroleum Raw Materials

Science.gov (United States)

Palaszewski, Bryan A.; Hepp, Aloysius F.; Kulis, Michael J.; Jaworske, Donald A.

2013-01-01

Recycling human metabolic and plastic wastes minimizes cost and increases efficiency by reducing the need to transport consumables and return trash, respectively, from orbit to support a space station crew. If the much larger costs of transporting consumables to the Moon and beyond are taken into account, developing waste recycling technologies becomes imperative and possibly mission enabling. Reduction of terrestrial waste streams while producing energy and/or valuable raw materials is an opportunity being realized by a new generation of visionary entrepreneurs; several relevant technologies are briefly compared, contrasted and assessed for space applications. A two-step approach to nonpetroleum raw materials utilization is presented; the first step involves production of supply or producer gas. This is akin to synthesis gas containing carbon oxides, hydrogen, and simple hydrocarbons. The second step involves production of fuel via the Sabatier process, a methanation reaction, or another gas-to-liquid technology, typically Fischer-Tropsch processing. Optimization to enhance the fraction of product stream relevant to transportation fuels via catalytic (process) development at NASA Glenn Research Center is described. Energy utilization is a concern for production of fuels whether for operation on the lunar or Martian surface, or beyond. The term green relates to not only mitigating excess carbon release but also to the efficiency of energy usage. For space, energy usage can be an essential concern. Another issue of great concern is minimizing impurities in the product stream(s), especially those that are potential health risks and/or could degrade operations through catalyst poisoning or equipment damage; technologies being developed to remove heteroatom impurities are discussed. Alternative technologies to utilize waste fluids, such as a propulsion option called the resistojet, are discussed. The resistojet is an electric propulsion technology with a powered

Sulfur Release from Cement Raw Materials during Solid Fuel Combustion

DEFF Research Database (Denmark)

Nielsen, Anders Rooma; Larsen, Morten B.; Glarborg, Peter

2011-01-01

During combustion of solid fuels in the material inlet end of cement rotary kilns, local reducing conditions can occur and cause decomposition of sulfates from cement raw materials. Decomposition of sulfates is problematic because it increases the gas-phase SO2 concentration, which may cause...... deposit formation in the kiln system. SO2 release from cement raw materials during combustion of solid fuels has been studied experimentally in a high temperature rotary drum. The fuels were tire rubber, pine wood, petcoke, sewage sludge, and polypropylene. The SO2 release from the raw materials...

Flödesekonomins dimensioner : supply chain management

OpenAIRE

Broberg, Elias; Wallin, Mattias

2008-01-01

It is of increasing importance to in the most effective possible way, manage and control all the transactions of raw materials, products and information that are exchanged between an organization and all its operators. These flows and the need for strategy and managing the processes of planning, implementing and control of the supply chain, has given name to the concept supply chain management. Supply chain management involves all movement and storage of raw material, and all the processes th...

Renewable raw materials in the field of industry; Nachwachsende Rohstoffe in der Industrie

Energy Technology Data Exchange (ETDEWEB)

Peters, D.

2006-07-01

Being used to the practiced processing of raw materials for many decades the industry had to tap the advantage of renewable raw materials again. Conventional processing methods had to be changed and to be newly developed. This has been a rewarding task considering the ecological advantages but also considering the interesting markets for products based upon renewable raw materials. Today the German industry above all the chemical industry again processes agricultural and forestal raw materials to a considerable extent. Ten percent of the raw materials processed by the chemical industry are renewable. The wood processing industry is an important economic sector that achieves a value creation with the raw material wood exceeding the value creation of other industries by far. This brochure gives an overview of the possible substances, which are processed from renewable raw materials in Germany and it shows the important role that agricultural raw materials and wood already play for the industry nowadays. (orig.)

Basic Thermal Parameters of Selected Foods and Food Raw Materials

Directory of Open Access Journals (Sweden)

Monika Božiková

2017-01-01

Full Text Available In general, processing and manipulation with foods and food raw materials have significant influence on their physical properties. The article is focused on thermophysical parameters measurement of selected foods and food raw materials. There were examined thermal conductivity and thermal diffusivity of selected materials. For detection of thermal parameters was used instrument Isomet 2104, which principle of measurement is based on transient methods. In text are presented summary results of thermal parameters measurement for various foods and food raw materials as: granular materials – corn flour and wheat flour; fruits, vegetables and fruit products – grated apple, dried apple and apple juice; liquid materials – milk, beer etc. Measurements were performed in two temperature ranges according to the character of examined material. From graphical relations of thermophysical parameter is evident, that thermal conductivity and diffusivity increases with temperature and moisture content linearly, only for granular materials were obtained non‑linear dependencies. Results shows, that foods and food raw materials have different thermal properties, which are influenced by their type, structure, chemical and physical properties. From presented results is evident, that basic thermal parameters are important for material quality detection in food industry.

Raw material studies of West Central Serbia

Directory of Open Access Journals (Sweden)

Vera Bogosavljević Petrović

2014-03-01

Full Text Available This paper deals with raw material problems in the territory of West Central Serbia geologically determined as the Čačak-Kraljevo (or West Morava basin. Our research is presented through the most striking case studies, Lojanik, Vlaška Glava and Lazac.  The Lojanik hill is a silicified forest by origin. It has occasionally been in use from the earliest periods of prehistory until today as a source of black and ochre-coloured flint, opal and silicified wood. A detailed prospection, including the mapping of surface finds using square nets, was conducted during two research campaigns.The Vlaška Glava is an open-air Palaeolithic site at which artefacts made of white, ochre, red, brown and black chert, silicified magnesite, volcanic and metamorphic rocks were found. Our research of primary and secondary geological deposits in the vicinity of the site showed equivalent raw material. We also found an interesting primary deposit of high quality bluish grey flint with outcrop activities (Workshop 1.The Lazac shaft is a contemporary magnesite mine, recently abandoned because of the high percentage of silicon-dioxide. We determined the same raw material in collections found at nearby Neolithic sites. Certain similarities between the wooden support systems of ore exploration in the Middle Ages and modern times were established at the entrance of the shaft.Our research in the territory of the West Morava basin resulted in reconstruction of some links between geological deposits and settlements and also creation of a relevant base for future raw material studies.

International symposium on uranium raw material for the nuclear fuel cycle: Exploration, mining, production, supply and demand, economics and environmental issues (URAM-2009). Book of abstracts

International Nuclear Information System (INIS)

2009-01-01

The International Symposium on Uranium Raw Material for the Nuclear Fuel Cycle: Exploration, Mining, Production, Supply and Demand, Economics and Environmental Issues (URAM-2009) addressed all aspects of the uranium fuel cycle, from the availability of raw materials to the long-term sustainability of nuclear power. The revival of the uranium industry in recent years has caused a dramatic increase in uranium exploration and mining activities in several countries. URAM-2009 was intended to bring together scientists, exploration and mining geologists, engineers, operators, regulators and fuel cycle specialists to exchange information and discuss updated research and current issues in uranium geology and deposits, exploration, mining and processing, production economics, and environmental and legal issues. Contributed papers covered uranium markets and economics (including supply and demand); social licensing in the uranium production cycle; uranium exploration (including uranium geology and deposits); uranium mining and processing; environmental and regulatory issues; human resources development. There was a poster session throughout the symposium, as well as an exhibition of topical photographs. A workshop on recent developments in Technical Cooperation Projects relevant to the Uranium Production Cycle area was also organized. On the last day of the symposium, there was an experts' Panel Discussion. The presentations and discussions at URAM-2009 (a) led to a better understanding of the adequacy of uranium sources (both primary and secondary) to meet future demand, (b) provided information on new exploration concepts, knowledge and technologies that will potentially lead to the discovery and development of new uranium resources, (c) described new production technology having the potential to more efficiently and economically exploit new uranium resources; (d) documented the environmental compatibility of uranium production and the overall effectiveness of the final

Insulating materials from renewable raw materials. 3. upd. ed.; Daemmstoffe aus nachwachsenden Rohstoffen

Energy Technology Data Exchange (ETDEWEB)

Brandhorst, Joerg; Spritzendorfer, Josef; Gildhorn, Kai; Hemp, Markus

2009-07-01

Due to increasing energy prices, obligations to climatic protection and the desire for comfortable, allergy-free living, the thermal insulation is a central question with building and sanitation. Under this aspect, the contribution under consideration describes the very dynamic market of the insulating materials from renewable raw materials and deals with the questions of the users. In particular, the following raw materials are considered in the production of insulating materials: Wood fibre, wood chips, wood wool, sheep wool, flax, hemp, reeds, straw, cellulose.

Influence of man-made aluminosilicate raw materials on physical and mechanical properties of building materials.

Science.gov (United States)

Volodchenko, A. A.; Lesovik, V. S.; Stoletov, A. A.; Glagolev, E. S.; Volodchenko, A. N.; Magomedov, Z. G.

2018-03-01

It has been identified that man-made aluminosilicate raw materials represented by clay rock of varied genesis can be used as energy-efficient raw materials to obtain efficient highly-hollow non-autoclaved silicate materials. A technique of structure formation in the conditions of pressureless steam treatment has been offered. Cementing compounds of non- autoclaved silicate materials based on man-made aluminosilicate raw materials possess hydraulic properties that are conditioned by the process of further formation and recrystallization of calcium silicate hydrates, which optimizes the ratio between gellike and crystalline components and densifies the cementing compound structure, which leads to improvement of performance characteristics. Increasing the performance characteristics of the obtained products is possible by changing the molding conditions. For this reason, in order to create high-density material packaging and, as a result, to increase the strength properties of the products, it is reasonable to use higher pressure, under which raw brick is formed, which will facilitate the increase of quality of highly-hollow products.

Branding Raw Material to Improve Human Rights: Intel’s Ban on Conflict Minerals

Directory of Open Access Journals (Sweden)

Osburg Thomas

2016-05-01

Full Text Available Many companies seek to take over more responsibility for their supply chain and their raw materials. Intel was one of the first companies investigating the origin of conflict minerals like tin, tantalum, gold or tungsten, which are used in many electronic products. Their path to ultimately offering conflict-free microprocessors took more than five years of consistent preparation and intensive reengineering of the business process. They identified smelters as a bottleneck in the supply chain and started cooperating closely with them to trace their minerals’ supply. By developing a bag-and-tag system the company is now able to ensure that their minerals are not sourced from illegal mines, which often finance illegal warlords, for example, in the eastern Democratic Republic of Congo. The cooperation with the smelters brings about higher demand and in consequence higher prices for the legally sourced minerals. Many small miners and their families in the region directly benefit from the higher earnings.

Which place for nuclear power? The cost of power supplies security. The tariffs of power networks use. Towards a new regime of natural gas transportation in France. The mastery of raw materials supplies. The behaviour of the estate park of the collieries of the Nord-Pas-de-Calais basin

International Nuclear Information System (INIS)

Mattatia, St.; Bonnet, J.Ph.; Singly, B. de; Philippe, R.; Thouvenin, V.; Clain, Y.; Dalnoky, M.

2002-01-01

This issue of 'Energies et Matieres Premieres' quarterly newsletter comprises 6 articles dealing with: the share of nuclear power in the future world and French energy status (environmental and economical aspects, service life of nuclear power plants and coming up renewal, uncertainties); the cost of the security of power supplies (the improvement of power networks after the 1999 storms, the burial of power lines); how to charge for the uncatchable: the tariffs of use of power networks (the uncatchable notion of electricity transport, the first proposals of the French commission of electric power regulation (CRE), the general principles of tariffing and their practical implementation); towards a new regime of natural gas transportation in France (a legal regime that became singular inside the European Union, a careful financial evaluation of concessions, the new regime of transport permission); the mastery of raw materials supplies: a giant world scale 'Go' game (the Chinese control of the tungsten file, the titanium market, the policy of security of supplies for the sensible raw materials); the behaviour of the estate park of the old collieries of Nord-Pas de Calais region (northern France) belonging to the national group 'Charbonnages de France' (context and implementation of the transfer). The status of the evolution of the French energy consumption and bill since January 2000 is presented in a series of graphics at the end of this issue. (J.S.)

Thorium and Uranium in the Rock Raw Materials Used For the Production of Building Materials

Science.gov (United States)

Pękala, Agnieszka

2017-10-01

Thorium and uranium are constant components of all soils and most minerals thereby rock raw materials. They belong to the particularly dangerous elements because of their natural radioactivity. Evaluation of the content of the radioactive elements in the rock raw materials seems to be necessary in the early stage of the raw material evaluation. The rock formations operated from deposits often are accumulated in landfills and slag heaps where the concentration of the radioactive elements can be many times higher than under natural conditions. In addition, this phenomenon may refer to buildings where rock raw materials are often the main components of the construction materials. The global control system of construction products draws particular attention to the elimination of used construction products containing excessive quantities of the natural radioactive elements. In the presented study were determined the content of thorium and uranium in rock raw materials coming from the Bełachatów lignite deposit. The Bełchatów lignite deposit extracts mainly lignite and secondary numerous accompanying minerals with the raw material importance. In the course of the field works within the framework of the carried out work has been tested 92 samples of rocks of varied petrographic composition. There were carried out analyses of the content of the radioactive elements for 50 samples of limestone of the Jurassic age, 18 samples of kaolinite clays, and 24 samples of siliceous raw materials, represented by opoka-rocks, diatomites, gaizes and clastic rocks. The measurement of content of the natural radioactive elements thorium and uranium based on measuring the frequency counts of gamma quantum, recorded separately in measuring channels. At the same time performed measurements on volume patterns radioactive: thorium and uranium. The studies were carried out in Mazar spectrometer on the powdered material. Standardly performed ten measuring cycles, after which were calculated

Materials, critical materials and clean-energy technologies

Science.gov (United States)

Eggert, R.

2017-07-01

Modern engineered materials, components and systems depend on raw materials whose properties provide essential functionality to these technologies. Some of these raw materials are subject to supply-chain risks, and such materials are known as critical materials. This paper reviews corporate, national and world perspectives on material criticality. It then narrows its focus to studies that assess "what is critical" to clean-energy technologies. The focus on supply-chain risks is not meant to be alarmist but rather to encourage attention to monitoring these risks and pursuing technological innovation to mitigate the risks.

ICE CREAM WITH A COMBINED COMPOSITION OF RAW MATERIALS

Directory of Open Access Journals (Sweden)

O. E. Khodyreva

2013-01-01

Full Text Available Dairy products are the product of daily demand. Nowadays actively assimilate new types of raw materials, tech-nology, formulation. One of the propagation methods of enriching dairy products is a combination of milk and vegetable raw materials. The possibility of making a concentrated paste of Jerusalem artichoke in dairy products was investigated. The ice cream sundae "Vanilla" was chosen as the object of research.

National reports on raw materials economy. Vol. 6

International Nuclear Information System (INIS)

Haude, H.; Weber, R.

1975-06-01

A review is given of the ore deposits, mine production, and use of mineral resources in Argentina (oil, gas, asphalt, oil shale, coal, uranium, thorium, iron, manganese, chrome, tungsten, vanadium, copper, lead, zinc, tin, antimony, gold, silver, aluminium, beryllium, boron, sulfur, and fluorite). Argentina is dependent on imports of nearly all mineral resources. Only exports of zinc, tungsten, fluorite, and borate have been possible and the only other significant production has been of energy resources, iron, manganese, and lead. The extreme concentration of population in the east, the great distances to the Andes in the west, and the as yet inadequate transport network with the west has limited the mining activity up to the present. As part of industrial development, the government has made great efforts to increase the supply of raw materials through intensive prospecting and use of Argentina's own natural resources. Newly discovered ore deposits confirm that extensive parts of the country are prospective for mineral resources. (orig.) [de

The key numbers of the mineral raw materials

International Nuclear Information System (INIS)

Mandil, C.

1996-01-01

Mineral raw materials come from fossil reserves or ores resulting from the geologic and climatic history of the Earth. The access to economic development for 80% of the worldwide population and the high rate of demographic growth (probably 8 billions of inhabitants in 2025) are important factors that can greatly multiply the worldwide consumption of ores. In parallel, environmental concerns and the increasing need for a better equilibrium between wildlife preservation and the supply of economic needs, lead to a more reasonable and mastered use of natural resources. The aim of this book is to shade light and give global elements of thoughts on mineral resources, and for the main of those (about 30 metals and mineral substances), to review the most useful data and references about their production and consumption. For each question, chapters are devoted to the situation of France in its worldwide context. One chapter concerns the uranium ores (reserves, production, prices evolution, consumption, economic flux and companies involved). (J.S.)

Regenerative raw materials - High technology without end; Nachwachsende Rohstoffe - Spitzentechnologie ohne Ende

Energy Technology Data Exchange (ETDEWEB)

Wenig, Barbara

2007-07-01

Regenerative raw materials are the basis for a multiplicity of environmentally friendly products. Regenerating raw materials fascinate by special qualities and offer the possibility of preserving only restricted existing fossil resources and climatic friendly managing. The review under consideration reports on areas in which vegetable raw materials already are established as well as on future prospects.

Extreme poverty and affluence, the two sides of our world. Energy, raw materials, environment

Energy Technology Data Exchange (ETDEWEB)

Bischoff, G

1987-07-01

The author discusses the different economic situtions in the industrialized and in the developing parts of the world, and the resulting fears of the populations. These feelings of fear and apprehension are traced back to their manifold causes, discussing among others unsecure raw material supply and the damage to the environment, hostile attitudes towards industrial exploitation or technical sciences, the role of the press and other media in the 'making' of fear of life, the fear of becoming slave of the machines. The problems' solution lies in the supply and utilisation of energy, and any efforts towards maintaining our natural environment so that life may go on will have to be based, the author says, on the technological development from nuclear power to thermonuclear fusion. (HSCH).

Mesta/Kenaf as raw material for Kraft pulping

Energy Technology Data Exchange (ETDEWEB)

Saraf, V. P.; Shiveshwar, R. M.; Meshramkar, P. M.; Deb, U. K.; Jaspal, N. S.; Biyani, B. P.

1980-03-15

In recent years, the shortage of conventional raw materials for pulping has intensified a world-wide search for alternate raw materials. Among other cellulosic materials, attention has focused on agricultural residues and annual plants. In this category, Kenaf, also called Mesta, has been studied as a fiber source in many countries including the USA, Phillippines and India. A comprehensive study on kraft pulping of mesta was carried out where the fiber morphology, pulping, bleaching and papermaking characteristics were investigated. Black liquor properties were also determined. The results of this study are reported and compared to the conventional raw material bamboo. The investigation has shown that mesta is easily pulped and bleached and forms sheets of excellent strength properties, comparable to or better than bamboo pulps. The black liquor from mesta is similar to bamboo in calorific value but is very low in silica, which is highly desirable from the chemical recovery point of view. As with all agricultural residues and annual plants, mesta has a high bulk per unit weight. The problems arising from this, e.g., baling, transportation, proper utilization of digester capacity, have to be studied before mesta can be widely accepted in the paper industry.

Synthesis of material microporous using raw materials alternative as a source of silica and alumina

International Nuclear Information System (INIS)

Santos, E.A.; Silva, T.L.

2014-01-01

Synthetic zeolites have important properties of a technological viewpoint. Thus, this work aims at the use of natural raw materials such as kaolin waste and wood ash in order to produce these microporous materials. The starting materials were characterized by X-ray diffraction (XRD) and spectroscopy, X-ray fluorescence (XRF); the phases formed as synthesis products were identified by XRD and gravimetric and differential thermal analysis (DTA/TG). Hydrothermal synthesis took place by mixing the raw materials in stoichiometrically calculated batches with NaOH (3M) at 90 °C and time of 6, 20, 24 and 48 hours. The results show the formation of phases of type zeolite A and sodalite, demonstrating the raw materials be an efficient and low cost alternative to producing microporous materials. (author)

Incentivizing secondary raw material markets for sustainable waste management.

Science.gov (United States)

Schreck, Maximilian; Wagner, Jeffrey

2017-09-01

Notwithstanding several policy initiatives in many countries over a number of years, there remains a general sense that too much municipal solid waste is generated and that too much of the waste that is generated is landfilled. There is an emerging consensus that a sustainable approach to waste management requires further development of secondary raw material markets. The purpose of this paper is to propose a theoretical economic model that focuses upon this stage of a sustainable waste management program and explores policy options that could motivate efficiency in secondary raw material markets. In particular, we show how firm profit and social welfare optimizing objectives can be reconciled in a two-product market of waste management processes: landfilling and material reclamation. Our results provide theoretical support for building out recent Circular Economy initiatives as well as for the relatively recent emergence of landfill mining as a means for procuring secondary raw materials. Copyright © 2017 Elsevier Ltd. All rights reserved.

Analysis of forecasting and inventory control of raw material supplies in PT INDAC INT’L

Science.gov (United States)

Lesmana, E.; Subartini, B.; Riaman; Jabar, D. A.

2018-03-01

This study discusses the data forecasting sales of carbon electrodes at PT. INDAC INT L uses winters and double moving average methods, while for predicting the amount of inventory and cost required in ordering raw material of carbon electrode next period using Economic Order Quantity (EOQ) model. The result of error analysis shows that winters method for next period gives result of MAE, MSE, and MAPE, the winters method is a better forecasting method for forecasting sales of carbon electrode products. So that PT. INDAC INT L is advised to provide products that will be sold following the sales amount by the winters method.

CHALLENGES OF SUPPLY CHAIN MANAGEMENT

Directory of Open Access Journals (Sweden)

Natalia GALANTON

2017-11-01

Full Text Available The present article highlights the basic characteristics of the supply chain, specific to changes in the business environment of companies at the beginning of the 21st century. Supply chain activities turn natural resources, raw materials and components into a finished product, which is then delivered to the final customer. The supply chain incorporates the production process alongside the raw material acquisition and distribution of finished products, encompassing all the existing process responsible for transforming the materials taken from the supplier to the finished products delivered to customers. Today, competitiveness and performance of an organization are dependent on belonging to an efficient and effective supply-delivery chain where synergies exist due to the establishment and implementation of common goals and strategies by partners. Competition does not take place between independent organizations or between small groups of organizations, but between supply and delivery chains, made up of interconnected networks of producers, distributors and logistics providers. Under these circumstances, supply chain managers must seek solutions to respond promptly to the most important challenges in the field.

Evaluation of effectiveness of raw materials and materials use in a blast furnace department of a steelworks

Directory of Open Access Journals (Sweden)

E. Kardas

2017-01-01

Full Text Available The paper analyses the quality of raw materials used in the production of blast furnace pig iron. The ferruginous sinter and pellets are the basic raw materials used in the process. The paper presents the impact of those raw materials quality on the effectiveness of the blast furnace process. The process effectiveness will be specified by means of selected process parameters.

Basic Thermal Parameters of Selected Foods and Food Raw Materials

OpenAIRE

Monika Božiková; Ľubomír Híreš; Michal Valach; Martin Malínek; Jan Mareček

2017-01-01

In general, processing and manipulation with foods and food raw materials have significant influence on their physical properties. The article is focused on thermophysical parameters measurement of selected foods and food raw materials. There were examined thermal conductivity and thermal diffusivity of selected materials. For detection of thermal parameters was used instrument Isomet 2104, which principle of measurement is based on transient methods. In text are presented summary results of ...

Optimization of the raw material supply chain for Philips TL factories

NARCIS (Netherlands)

Rodrigues, Iana Araujo

2009-01-01

The globalization results in more complex and dynamic supply chains. While Asia becomes the first sourcing alternative for many companies, supply chains need to be redesigned in order to reduce costs, improve performance, increase flexibility and expand collaboration among the parties involved. It

Theoretical backgrounds of non-tempered materials production based on new raw materials

Science.gov (United States)

Lesovik, V. S.; Volodchenko, A. A.; Glagolev, E. S.; Chernysheva, N. V.; Lashina, I. V.; Feduk, R. S.

2018-03-01

One of the trends in construction material science is development and implementation of highly effective finish materials which improve architectural exterior of cities. Silicate materials widely-used in the construction today have rather low decorative properties. Different coloring agents are used in order to produce competitive materials, but due to the peculiarities of the production, process very strict specifications are applied to them. The use of industrial wastes or variety of rock materials as coloring agents is of great interest nowadays. The article shows that clay rock can be used as raw material in production of finish materials of non-autoclaved solidification. This raw material due to its material composition actively interacts with cementing component in steam treatment at 90–95 °C with formation of cementing joints that form a firm coagulative-cristalized and crystallization structure of material providing high physic-mechanical properties of silicate goods. It is determined that energy-saving, colored finish materials with compression strength up to 16 MPa can be produced from clay rocks.

Materials, critical materials and clean-energy technologies

Directory of Open Access Journals (Sweden)

Eggert R.

2017-01-01

Full Text Available Modern engineered materials, components and systems depend on raw materials whose properties provide essential functionality to these technologies. Some of these raw materials are subject to supply-chain risks, and such materials are known as critical materials. This paper reviews corporate, national and world perspectives on material criticality. It then narrows its focus to studies that assess “what is critical” to clean-energy technologies. The focus on supply-chain risks is not meant to be alarmist but rather to encourage attention to monitoring these risks and pursuing technological innovation to mitigate the risks.

Annual report 2005 General Direction of the Energy and raw materials

International Nuclear Information System (INIS)

2005-01-01

This 2005 annual report of the DGEMP (General Direction of the Energy and the raw Materials), takes stock on the energy bill and accounting of the France. The first part presents the electric power, natural gas and raw materials market in France. The second part is devoted to the diversification of the energy resources with a special attention to the renewable energies and the nuclear energy. The third part discusses the energy and raw materials prices and the last part presents the international cooperation in the energy domain. (A.L.B.)

Natural gas as raw material for industrial development

International Nuclear Information System (INIS)

Kvisle, Steinar

2006-01-01

Industrial development based on natural gas has broad, industrial implications. Norway has a vital industry based on natural gas as raw material, here under Ormen Lange, Snoehvit LNG, Tjeldbergodden and Petrochemical Grenland. The petrochemical industry has challenges, e.g. the cost of raw materials and energy, localization related to the markets, and recruitment, but considerable investments are made in the sector. The Northern areas in Norway may have special challenges related to bringing the product to the market. Solutions to this challenge are in LNG (liquid natural gas), GTL (gas to liquids), and GTO (gas to olefins)

System simulation application for determining the size of daily raw material purchases at PT XY

Science.gov (United States)

Napitupulu, H. L.

2018-02-01

Every manufacturing company needs to implement green production, including PT XY as a marine catchment processing industry in Sumatera Utara Province. The company is engaged in the processing of squid for export purposes. The company’s problem relates to the absence of a decision on the daily purchase amount of the squid. The purchase of daily raw materials in varying quantities has caused companies to face the problem of excess raw materials or otherwise the lack of raw materials. The low purchase of raw materials will result in reduced productivity, while large purchases will lead to increased cooling costs for storage of excess raw materials, as well as possible loss of damage raw material. Therefore it is necessary to determine the optimal amount of raw material purchases every day. This can be determined by applying simulation. Application of system simulations can provide the expected optimal amount of raw material purchases.

Farmers as providers of raw materials and energy. Proceedings; Der Landwirt als Energie- und Rohstoffwirt. Konferenzbeitraege

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-07-01

Within the 10th EUROSOLAR conference at 14th to 15th April, 2008, at Leipzig (Federal Republic of Germany), the following lectures were held: (a) Bioenergy in the Federal Republic of Germany: Potentials, state of the art and perspectives (M. Kaltschmitt, V. Lenz, D. Thraen); (b) Chances and risks of the energy production from biomass in rural area (G. Thalheim); (c) To the compatibility of utilizing bio energy and environmental preservation (K. Mueschen); (d) Biorefinery systems - industrial material use of regenerative raw materials (B. Kamm); (e) Agriculturists and forestry experts as producers of raw material - current risks and new chances (H. Fischer); (f) Potentials of the improvement of productivity by means of an expansion of options of useful plants (K. Goedeke); (g) Farmers as providers of energy and raw materials (H. Loick); (h) Problems and challenges of the utilization of biomass (P. Volkmer); (i) Energetic recycling management (G. Mehler); (j) Pure fuels instead of fuel mixtures - The farmer as providers of energy and raw materials (P. Schrum); (k) Feed and distribution of bio-natural gas from the view of a regional provider (J. Horn); (l) Biogasification and feed into natural gas networks - by the example of BGA Darmstadt-Wixhausen (M. Schlegel); (m) The right framework for the feed of bio methane into natural gas nets (S. Reichelt); (n) Virtual power plants - Efficient option of the local energy production (G. Weissmueller); (o) The role of bio energy in the power mix renewable energies (R. Bischof); (p) The autonomous power supply - from the bio energy village to the autonomous solar energy village (K. Scheffer); (q) Bio energy villages at the Lake Constance - Model projects for the rural area (B. Mueller); (r) Bio energy region Mureck / Steiermark (K. Totter); (s) The bio energy in the current German legislation process (H.-J. Fell).

Material Classification Using Raw Time-of-Flight Measurements

KAUST Repository

Su, Shuochen; Heide, Felix; Swanson, Robin J.; Klein, Jonathan; Callenberg, Clara; Hullin, Matthias; Heidrich, Wolfgang

2016-01-01

We propose a material classification method using raw time-of-flight (ToF) measurements. ToF cameras capture the correlation between a reference signal and the temporal response of material to incident illumination. Such measurements encode unique

The Effect of Micro/Nano-metrics Size on the Interaction of Jordanian Aluminosilicate Raw Materials with High pH Solution

Science.gov (United States)

Aldabsheh, Islam; Garcia-Valles, Maite; Martinez, Salvador

2014-05-01

Environmental preservation has become a driving force behind the search for new sustainable and environmentally friendly composites to replace conventional concrete produced from ordinary Portland cement (OPC). Current researches concentrate on developing building products (geopolymers) through geopolymerization. The goal is to produce low cost construction materials for green housing. Geopolymerization is the process of polymerizing minerals with high silica and alumina at low temperature by the use of alkali solutions. Dissolution is the most important process for supplying the high initial Al and Si concentrations to produce the gel phase that is responsible for geopolymerization. This study has been focused on the influence of different micrometric particle sizes of three Jordanian raw materials on their dissolution behavior in sodium hydroxide solution. The samples are kaolinite, volcanic tuff and silica sand. The dissolution properties of each material, alone and mixed with the other two materials were studied in different concentrations (5 and 10 M) using (NaOH) at 25ºC, and shaking time for 24 and 168 h. To better understand the dissolution process, the alkaline solution was renewed after the desired time in order to know if the Al-Si raw material is completely dissolved or not. Different analytical techniques were used to characterize raw materials physically, mineralogically, chemically and thermally. All processed samples either centrifuged solutions or solid residues were fully characterized. The leached concentrations of Al and Si were determined by inductively coupled plasma (ICP). X-ray Diffraction Technique (XRD), Scanning Electron Microscopy (SEM), and Thermo Gravimetric Analysis (TGA) were used to evaluate the solid residue characterization compared with the original ones. The three aluminosilicate raw materials have indicated variable degrees of solubility under highly alkaline conditions. The method for the size reduction of the used raw

Sustainable prevention of resource conflicts. Conflict risks for access and use of raw materials (report 1); Rohstoffkonflikte nachhaltig vermeiden. Konfliktrisiken bei Zugang und Nutzung von Rohstoffen (Teilbericht 1)

Energy Technology Data Exchange (ETDEWEB)

Taenzler, Dennis; Westerkamp, Meike [Adelphi Research, Berlin (Germany); Supersberger, Nikolaus; Ritthoff, Michael; Bleischwitz, Raimund [Wuppertal Institut fuer Klima, Umwelt, Energie GmbH, Wuppertal (Germany)

2011-04-15

Inequalities of resources ownership and the consequences of the exploitation of non-renewable resources have always caused violent conflicts of varying intensity. The resulting interdependence between conflicts on the one hand and resources on the other hand - discussed here under the term of conflict-resources nexus - is complex and requires a detailed theoretical and conceptional assessment. The risks of conflict vary as a function of the constellations of actors and the existing political, economic and social boundary conditions. These risks are often globally linked and reflect the flow of resources between consumer countries, transit countries, and producer countries. Conflicts in producer countries may endanger the supply of raw materials to consumer countries. Whether the raw material is an energetic resource like natural gas, petroleum, or coal, or a non-energetic resource like coltane or copper: There are many who demand that Germany should adapt to stronger competition and shorter supply and should also be aware of the possibility of conflicts about raw materials. This part-report of the project 'Sustainable Prevention of Resource Conflicts' presents important theoretical and conceptional considerations on the risk of conflict in the raw materials sector. On this basis, further reports will present case studies, scenarios, and preventive strategies. (orig./RHM)

Raw materials for reflector graphite (for reactors)

International Nuclear Information System (INIS)

Wilhelmi, G.; Mindermann, D.

1992-01-01

The manufacturing concept for the core components of German high temperature reactor (HTR) types of graphite was previously entirely directed to the use of German tar coke (St coke). As the plants for producing this material no longer complied technically with the current environmental protection requirements, one had to assume that they would soon be shut down. To prevent bottlenecks in the erection of future HTR plants, alternative cokes produced by modern processes by Japanese manufacturers were checked for their suitability for the manufacture of reactor graphite. This report describes the investigations carried out on these materials from the safe delayed coking process. The project work, apart from analysis of the main data of the candidate coke considered, included the processing of the raw materials into directly and secondarily extruded graphite rods on the laboratory scale, including characterisation. As the results show, the material data achieved with the previous raw material can be reproduced with Japanese St coke. The tar coke LPC-A from the Nippon Steel Chemical Co., Ltd was decided on as the new standard coke for manufacturing reflector graphite. (orig.) With 15 tabs., 2 figs [de

Supply of nuclear materials

Energy Technology Data Exchange (ETDEWEB)

NONE

1959-07-15

Any large-scale atomic energy programme is inherently dependent on the availability of materials that can be used as fuel in reactors, and the International Atomic Energy Agency, at its inception, was intended to act as a bank for the flow of materials between Member States. According to its Statute, one of its primary functions is to provide materials 'to meet the needs of research on, and development and practical application of, atomic energy for peaceful purposes, including the production of electric power, with due consideration for the needs of the under-developed areas of the world'. If the Agency is to fulfil its Statutory function, it would be essential for it to have not only some ready sources of supply, but also an established framework of general terms and conditions on which it could secure the supplies. The latter would eliminate the need for going through elaborate procedural formalities whenever the Agency receives a new request for materials. Such a framework has now been established with the signing of broad agreements with three countries which had offered to supply various quantities of special fissionable materials to the Agency. These agreements, signed in Vienna on 11 May 1959, with the USSR, the UK and the USA, lay down the basic terms and conditions on which these three countries will make nuclear materials available when needed by the Agency. The USSR has agreed to make available to the Agency 50 kg of uranium-235, the UK 20 kg and the USA 5 000 kg. The material will be supplied in the form of enriched uranium in any concentration up to 20 per cent; the amounts mentioned relate to the 235-isotope content of the materials. The UK and the USA have agreed that the parties to a particular supply agreement may decide on higher enrichment of uranium to be used for research reactors, material testing reactors or for other research purposes. The USA has also agreed to make available to the Agency such additional supplies as would match in amount

MICROBIOLOGY OF RAW MATERIALS USED FOR CONFECTIONARY PRODUCTION

Directory of Open Access Journals (Sweden)

Jana Petrová

2015-02-01

Full Text Available The aim of our study was to evaluate the microbiological quality of raw materials used for preparation of confectionery products. For microbiological evaluation total count of bacteria, mesophilic aerobic bacteria, coliform bacteria, yeast and microscopic filamentous fungi in samples of raw materials used in the manufacture and creams of confectionery products were detected. In addition to these groups of microorganisms the presence of pathogenic microorganisms Salmonella spp. and Staphylococcus aureus in creams was monitored. Products are assessed according to the limit values of the number of microorganisms defined in the Codex Alimentary of the Slovak Republic. For microbiological analysis of confectionery products, sampling of components of confectionary products and cream was carried out according to current health regulations and altogether 65 samples of components and creams were collected: 10 samples of raw materials sugar, 10 samples of flour, 10 samples of butter and 10 samples of eggs, 5 samples of butter yolk from cream-filled disposable bag without rum addition, 5 samples of butter yolk from cream-filled disposable bag with rum addition, 5 samples of cream-filled multiple use paid bag, 5 samples of cream-filled newly purchased paid bag, 5 samples of Venček corpus and 5 samples of the French cubes corpus. From raw material the highest TBC (2.65log CFU was in flour, but the lowest in sugar (1.35 log CFU, the highest years counts was found on flour (2.42, but lowest in butter (1.18, while wasn’t in egg. In samples of creams and corpus were increased occurrence of yeast, coliform bacteria. Salmonella spp. and Staphylococcus aureus weren’t isolated from any tested sample.

Annual report 1997. Energies and raw materials

International Nuclear Information System (INIS)

1997-01-01

This report gives the important directions of French energy policy. Nuclear energy, electric power, natural gas, coal and petroleum products are reviewed. The situations and the forecasting for raw materials are also given. (N.C.)

Renewable resources in industry. Industrial use of agricultural and wood raw materials in Germany. 3. compl. rev. ed.

Energy Technology Data Exchange (ETDEWEB)

Peters, Dietmar

2010-11-17

The ''Action Plan for the Industrial Use of Renewable Resources'' that was adopted by the German Federal Government in 2009 is an important impulse for promoting the industrial use of renewable resources parallel to their use for energy generation. The Action Plan sets forth a broad vision, not only for a significant and sustainable increase in the proportion of biomass used in industry but also for an improvement in the efficiency of biomass use in ensuring Germany's raw material supplies while taking into account the objectives and requirements of sustainability strategies. It also aims to secure and advance Germany's role as an international leader in the industrial use of renewable resources. This brochure provides an overview of the possible industrial uses of renewable resources in Germany and illustrates the important role that agricultural raw materials and wood already play in today's industry. (orig.)

Improving the Technology of Obtaining Technical Ethanol from Alternative Raw Materials

Directory of Open Access Journals (Sweden)

Sergіj Petrov

2018-05-01

Full Text Available The purpose of the article is to study the properties of fallen leaves as raw materials for the production of bioethanol; Improvement of the technology of recycling cellulosic raw materials into bioethanol in the most energy-efficient and ecological way. As a result of the study, it has been found out that the production of biofuels from renewable raw materials is characterized by features of innovative technology: the rapid growth of this sector of economy is accompanied by a significant increase in market share. The use of fallen leaves as raw material will eliminate the current conflict of interests associated with the use of food raw materials for the production of bioethanol, will prevent the withdrawal of resources from the sphere of food production. Significant positive factors in the production and use of biofuels are improvement of environmental conditions, reduction of the harmful effects of exhaust gases on the human body, reducing environmental pollution and, consequently, reducing morbidity and associated costs of medical care. The use of bioethanol as an ecobiopilot makes it possible to increase the octane number of fuel, and, accordingly, increase the efficiency of the engine. Thus, the use of bioethanol leads to a qualitative improvement of technical and economic indicators, which is also an indicator of innovation. The threat of reducing (exhausting non-renewable sources of energy is also the factor that necessitates the development and improvement of biofuel production technology. The relatively low profitability of biofuel production is due to the low yield of the target product and the high cost of pre-treatment of cellulose raw materials. The method of obtaining bioethanol from renewable non-demanded raw materials - fallen leaves - was improved. The technique allows to increase the bioethanol yield due to more effective hydrolysis of hard-hydrolysable polysaccharides. Further development of the study of the differences in

Qualification Methods of Al2O3 Injection Molding Raw Materials

International Nuclear Information System (INIS)

Egész, Á; Gömze, L A

2015-01-01

For producing ceramic arc tube parts (plugs), there are used two different major components for producing injection molding raw material (feedstock): high purity alumina powder as the main component, and an organic paraffin wax as a binder material. It is expressly important to know the material, physical and chemical properties of these components, since mainly these have effect on the homogenity of feedstock, and therefore on the quality of end product. In this research, both of the main components and the moldable raw material was investigated by visual, physical, and thermal methods. As most important and main statement, the researchers found that the dynamic viscosity of raw material depends more on the applied temperature, than on the deformation speed gradient.Applied analitycal methods were laser granulometry, sieve analysis, differential thermal analysis and rheology analysis. (paper)

Study of chemisrty and hydrolysates drying parameters of feather-downy raw material

OpenAIRE

LISITSYN A.B.; KRIGER O.V.; MITROKHIN P.V.

2016-01-01

The article describes chemical and amino acid composition of feather-downy raw material. It determines the mass fraction of crude protein, crude fiber, ash, calcium, phosphorus, sodium in the samples of feather-downy raw material. It is stated that the waste from poultry processing obtained from hens of all the studied species are characterized by a high content of crude protein and low in crude fiber and ash. The most valuable feather-downy raw material regarding protein is waste containing ...

Radiation sterilization of some cosmetic raw materials and preparations

International Nuclear Information System (INIS)

Achmatowicz-Szmajke, T.; Bryl-Sandelewska, T.; Galazka, M.

1979-01-01

The problem of microbiological purity of cosmetic preparations is discussed. Some results obtained on the influence of ionizing radiation on organoleptic and physicochemical properties of some cosmetic raw materials and final products are reported. The samples of raw materials and the final products were irradiated with a 10 MeV electron beam from an LAE 13/9 linear accelerator located in INR. The doses delivered to the materials were 0.5 - 2.3 Mrad (5-23 kGy). Immediately after irradiation, organoleptic estimations were made and over the next few days physicochemical investigations were performed. Non-irradiated samples were investigated together with irradiated ones. (T.I.)

Sustainable land use and renewable materials. Options for sustainable land use and resource protection strategies considering in particular a sustainable supply with renewable raw materials; Nachhaltige Flaechennutzung und nachwachsende Rohstoffe. Optionen einer nachhaltigen Flaechennutzung und Ressourcenschutzstrategien unter besonderer Beruecksichtigung der nachhaltigen Versorgung mit nachwachsenden Rohstoffen

Energy Technology Data Exchange (ETDEWEB)

Bringezu, Stefan; Schuetz, Helmut; Schepelmann, Philipp [Wuppertal Inst. fuer Klima, Umwelt, Energie (DE). Forschungsgruppe 3: Stoffstroeme und Ressourcenmanagement] (and others)

2009-10-15

This report highlights perspectives and options for action in order to promote sustainable land use considering resource of protection and supply with renewable raw materials. Land use within Germany is described as well as the global land use Germany based on its domestic consumption of products from agriculture and forestry. In terms of sustainable development, a long-lasting environmentally sound land use must be enabled which supports the required supply of renewable raw materials for energetic and non-energetic use while not endangering the future food supply of the growing world population. The Wuppertal Institute for Climate, Environment and Energy (WI), together with the Fraunhofer Institute for Environmental, Safety and Energy Technology (UMSICHT) in Oberhausen and the Institute for Energy and Environmental Research Heidelberg (IFEU), have for the first time with this study performed a comprehensive global land use balance for the consumption of food and non-food biomass in Germany, and have calculated in particular those greenhouse gas emissions which result from land use changes. In order not to endanger the climate and resource policy targets of the German government corrective measures for the implementation of policy targets for biomass use are needed. Existing targets for envisaged, enacted and promoted use of energy plants and biofuels should be reviewed. Existing legal biofuel quotas should by no means be increased. Furthermore, the national biofuels target for 2020 of a 12- 15% biofuels share of fuel consumption should be withdrawn, especially as this would send a clear international message. Such a target in the future would only be justifiable if the total amount of fuel consumed would decrease drastically (i.e. by more than half) as compared with today. Thereby the respective amount of biofuels required in the future would also decrease. The bonus for renewable raw materials of the Renewable Energy Sources Act (EEG) should be critically

Mineral raw materials used in the archaeological artifacts in Guayacas - Dayman - Paysandu

International Nuclear Information System (INIS)

Capdepont, I.; Del Puerto, L.; Castineira, C.; Pineiro, G.

2012-01-01

The purpose of this work is about the election, exploitation and modes of supply mineral raw resources used in the manufacturing of lithic and ceramic archaeological artifacts in Guayacas - Dayman - Paysandu

Aluminium reprocessing with local mineral raw material

International Nuclear Information System (INIS)

Mirsaidov, U.M.

2002-01-01

With the purpose of utilization of ice sediment, receiving from mud fields solutions and flotation tails and at using local aluminium and fluorine-containing raw material was elaborated fundamental technologic scheme presented in this chapter of book

European initiative on cdio in raw material programmes

NARCIS (Netherlands)

Edelbro, Catrin; Hulthén, Erik; Clausen, Elisabeth; Tanner, David; Herrera Herbert, Juan; Jonsson, Kristina; Bealieu, Stephan; Kamp, A.; Försth, Michael

2017-01-01

One of five Knowledge and Innovation Communities (KICs), was launched in Europe in 2014 and has its focus on exploration, extraction, mineral processing, metallurgy, recycling and material substitution of raw materials. To reach the vision, where the European Union’s industrial strength is based on

One step sintering of homogenized bauxite raw material and kinetic study

Science.gov (United States)

Gao, Chang-he; Jiang, Peng; Li, Yong; Sun, Jia-lin; Zhang, Jun-jie; Yang, Huan-ying

2016-10-01

A one-step sintering process of bauxite raw material from direct mining was completed, and the kinetics of this process was analyzed thoroughly. The results show that the sintering kinetics of bauxite raw material exhibits the liquid-phase sintering behavior. A small portion of impurities existed in the raw material act as a liquid phase. After X-ray diffraction analyses, scanning electron microscopy observations, and kinetics calculations, sintering temperature and heating duration were determined as the two major factors contributing to the sintering process and densification of bauxite ore. An elevated heating temperature and longer duration favor the densification process. The major obstacle for the densification of bauxite material is attributed to the formation of the enclosed blowhole during liquid-phase sintering.

Effect of raw wood supply system on the wood paying capability of a kraft pulp mill using Scots pine

Energy Technology Data Exchange (ETDEWEB)

Dahl, O. (Helsinki Univ. of Technology, Espoo (Finland), Dept. of Forest Products Technology), Email: olli.dahl@tkk.fi; Jylhae, P. (Finnish Forest Research Inst., Kannus (Finland)), Email: paula.jylha@metla.fi; Laitila, J. (Finnish Forest Research Inst., Joensuu (Finland)), Email: juha.laitila@metla.fi; Kaerhae, K. (Metsaeteho Oy, Helsinki (Finland)), Email: kalle.karha@metsateho.fi

2009-07-01

Integration of energy wood procurement into that of pulpwood is seen as a means for reducing the high procurement costs of small-diameter wood harvested from first thinnings. In the deepest mode of integration, pulp and energy fractions are separated from each other in the debarking drum of the pulp mill. In the present paper, the competitiveness of the conventional supply chain based on cut-to-length harvesting was compared to the supply systems based on the harvesting of loose whole trees and whole-tree bundling, in the cases of three Scots pine-dominated first-thinning stands using wood paying capability (WPC) of a kraft pulp mill as a decisive criterion. Furthermore, the competitiveness of first thinnings as raw material sources for a pulp mill was evaluated by using intermediate thinnings as s reference. (orig.)

Upper Palaeolithic lithic raw material sourcing in Central and Northern Portugal as an aid to reconstructing hunter-gatherer societies

Directory of Open Access Journals (Sweden)

Thierry Aubry

2016-09-01

Full Text Available We present the results of the study of lithic raw materials used in Upper Palaeolithic occupations preserved in caves, rockshelters and open-air sites from two different geological environments in Portugal. For the sites located in the Lusitanian Basin, flint or silcrete sources are easily available in close vicinity. The Côa Valley sites, located in the Iberian Massif, are within a geological environment where restricted fine-grained vein quartz and siliceous metamorphic rocks are available, but no flint or silcrete, even though both are present in the archaeological assemblages. Data from the two clusters of sites are compared with a third newly located site in the Lower Vouga valley, at the limit of the Iberian Massif with the Lusitanian Basin, where quartz vein raw material types are locally available and flint is about 40 kilometres distant. This study reveals prehistoric adaptations to these different geological contexts, with shorter networks for the Lusitanian basin sites contrasting with the long distance ones for the Côa Valley, and the Vouga site at an intermediary position. Finally, we propose that lithic raw material supply networks, defined by a GIS least-cost algorithm, could be used as a proxy not only for territoriality in the case of local and regional lithic raw material sources, but also to infer long-distance social networks between different Palaeolithic human groups, created and maintained to promote the access to asymmetrically distributed resources.

Different Subsidies’ Impact on equilibrium decision-making of closed-loop supply chain

Directory of Open Access Journals (Sweden)

Liurui Deng

2014-10-01

Full Text Available Purpose: An electronic product recycling not only needs the waste treatment company, but also involves recycler and remanufacturer. It is significance for increasing subsidy modes and promoting waste recycling to research the effect of government subsidies for recycler and remanufacturer on the equilibrium of closed-loop supply chain. Approach: In view of service competition, we build a Stackelberg model which contains an original manufacturer, a recycler and remanufacturer and further obtain the equilibrium decision of closed-loop supply chain. Based on this strategy model, we analyze how two different subsidies to utilization rate of raw materials, the service level and the demand of product affect on the terminal decision. Findings: We compared the two different subsidy ways in closed-loop supply chain. Subsidy to utilization rate of raw materials has no effect on the whole market demand for electronic product; and subsidy on utilization rate of raw materials has no effect on the whole market demand for electronic product. Research implications: Under the conditions in which government can observe the information of raw material utility and remanufacturing service level, if government decides to expand the market size, it could subsidize remanufacturer for different service level; Under the conditions in which government can observe the information of raw material utility and remanufacturing service level, if government want to improve utilization rate of raw materials, stimulate sustainable development of industries of electronic product, it can subsidizes recycler based on different utilization rate of raw materials. Value: We analyzed the closed-loop supply chain equilibrium, compared the effects on it under different subsidy mechanism and offered some advises in order to provide scientific support to promote electronic products recycling.

Polymer Industrial Floors - The Possibility of Using Secondary Raw Materials from Solar Panels

OpenAIRE

J. Kosikova; B. Vacenovska; M. Vyhnankova

2014-01-01

The paper reports on the subject of recycling and further use of secondary raw materials obtained from solar panels, which is becoming a very up to date topic in recent years. Recycling these panels is very difficult and complex, and the use of resulting secondary raw materials is still not fully resolved. Within the research carried out at the Brno University of Technology, new polymer materials used for industrial floors are being developed. Secondary raw materials are ...

Irradiation as an alternative environmentally friendly method for microbiological decontamination of herbal raw material

International Nuclear Information System (INIS)

Dragusin, M.; Rotaru, R.

2000-01-01

Microbiological contamination of herbal raw materials is a serious problem in the production of therapeutical preparations. A good quality of the product, according to the pharmaceutical requirements may be achieved by applying suitable methods of decontamination. The decontamination treatments should be fast and effective against all microorganisms. It should ensure the decontamination of both packaging and the microorganisms present and must not reduce the sensory and technological qualities of the commodities. Decontamination of herbal raw materials by irradiation is a method by choice. It is because chemical methods are recognized recently as not safe to the consumer. Irradiation, in turn, is technically feasible, very effective and friendly enough to environment process. Under the prevailing production and handling conditions, most herbs contain a large number of microorganisms what is a serious problem in the production of therapeutical preparations. For several years the most widely used methods for decontamination of herbs was fumigation with ethylene oxide or methyl bromide. Both methods today banned in most countries. Irradiation is an alternative and safe method for effective reducing the microbial contamination of herbal raw materials. The following raw materials have been examined: Folium Cynara, Folium Plantago, Flos Chamomillae, Semen Sylibum Marianum and Folium Farfara. The content of biologically active compounds before and after irradiation of the raw materials did not change in a significant degree after irradiation. The dose of radiation for herbals raw materials was 10 kGy. There are two groups of raw materials: - The raw materials designed for preparing granulates, tablets, dragees, capsules, aqueous extracts, infusions, macerations and preparations for external use; - The raw materials assigned for preparing alcoholic preparations, isolated compounds, oil preparations and essential oils. The medical herbs and herbal raw materials before their

Alignment of global supply networks based on strategic groups of supply chains

OpenAIRE

Nikos G. Moraitakis; Jiazhen Huo; Hans-Christian Pfohl

2017-01-01

Background: From a supply chain perspective, often big differences exist between global raw material suppliers’ approaches to supply their respective local markets. The progressing complexity of large centrally managed global supply networks and their often-unknown upstream ramifications increase the likelihood of undetected bottlenecks and inefficiencies. It is therefore necessary to develop an approach to strategically master the upstream complexity of such networks from a holistic su...

Radioactivity in polluted cement and its raw materials

International Nuclear Information System (INIS)

Khan, K.; Aslam, M.; Orfi, S.D.

1999-01-01

Samples of portland cement manufactured in the North West frontier Province (NWFP) of Pakistan and its different raw materials have been investigated applying gamma-spectrometric techniques for natural gamma-emitting radionuclides. A high purity germanium detector (HPGE) was used for data acquisition. Average values of the total specific activity (in Bq.kg/sup -1/ ) due to all the three radionuclides (/sub 40/K, /sup 226/Ra and /sup 232/Th) were found to be 327.7+ - 168.2 for portland cement; 104.4 + - 21.1 for limestone; 193.2+ - 50.4 for gypsum; 890.4 + - 86.5 for state and 545.6+ - 56.6 for latrite. The average specific activities due to /sup 40/K in Portland cement and all the raw materials were found to be higher as compared to /sub 226/Ra and /sup 232/Th in the respective materials. It is concluded that such materials do not pose any health problem and are not a major source of radiation hazards. However, The data can be utilized in determining radioactivity associated with other building materials. (author)

Quantitative analysis of raw materials mining of Sverdlovsk region in Russia

Science.gov (United States)

Tarasyev, Alexander M.; Vasilev, Julian; Turygina, Victoria F.

2016-06-01

The purpose of this article is to show the application of some qualitative methods for the analysis of a dataset for raw materials. The main approaches used are related to the correlation analysis and forecasting with trend lines. It is proved that the future mining of particular ores can be predicted on the basis of mathematical modeling. It is also shown that there exists a strong correlation between the mining of some specific raw materials. Some of the revealed correlations have meaningful explanations, and for others one should look for sophisticated interpretations. The applied approach can be used for forecasting of raw materials exploitation in various regions of Russia and in other countries.

Oat raw materials and bakery products - amino acid composition and celiac immunoreactivity.

Science.gov (United States)

Mickowska, Barbara; Litwinek, Dorota; Gambuś, Halina

2016-01-01

The aim of this study was to compare the biochemical and immunochemical properties of avenins in some special oat raw materials and additionally the possibility of using them as a raw material for the gluten-free bakery products. The compared oat raw materials were - oat flakes, commercial oat flours (including gluten-free oat flour) and residual oat flour, which is by-product of β-glucan preparation. Biochemical characteristic included amino acid compositions and SDS-PAGE profiles of extracted avenins. The immunochemical reactivity with polyclonal anti-gluten and monoclonal anti-gliadin antibodies was evaluated qualitatively and quantitatively by immunoblotting and ELISA methods. Additionally, experimental bakery products made of examined raw materials were assessed according to their suitability for the celiac patients' diet. The highest protein content was measured in the β-glucan preparation "Betaven" and gluten-free oat flour. Proteins of all materials are rich in glutamic and aspartic acid, leucine and arginine. Proportions of amino acids in avenins extracted from most of oat raw materials are similar, excluding gluten-free oat flour, which has a very low avenin content and proportions of individual amino acids are different. The SDS-PAGE protein pattern consisted of proteins with molecular weight of about 25-35 kDa. Polyclonal anti-gluten anti-body recognized all protein fractions of molecular weight higher than 20 kDa. Quantitative ELISA analysis shows that the majority of samples has a gliadin-like protein content within the range of 80-260 mg/kg, excluding gluten-free flours and corresponding bakery products. Altogether, β-glucan preparation has extremely high level of gliadin-like proteins. In the examined oat raw materials and foods the contents of immunoreactive amino acid sequences exceeded the limit of 20 mg/kg (considered as gluten-free) except for gluten-free flours (oat and  the prepared mixture) and the bakery products based on gluten

Effect of Selected Alternative Fuels and Raw Materials on the Cement Clinker Quality

Directory of Open Access Journals (Sweden)

Strigáč Július

2015-11-01

Full Text Available The article deals with the study of the effects of alternative fuels and raw materials on the cement clinker quality. The clinker quality was expressed by the content of two principal minerals alite C3S and belite C2S. The additions of alternative fuels ashes and raw materials, in principle, always increased the belite content and conversely reduced the amount of alite. The alternative fuels with high ash content were used such as the meat-bone meal, sewage sludge from sewage treatment plants and paper sludge and the used alternative raw materials were metallurgical slags - granulated blastfurnace slag, air cooled blastfurnace slag and demetallized steel slag, fluidized bed combustion fly ash and waste glass. Meat-bone meal, sewage sludge from sewage treatment plants and paper sludge were evaluated as moderately suitable alternative fuels which can be added in the amounts of 2.8 wt. % addition of meat-bone meals ash, 3.64 wt. % addition of sewage sludge ash and 3.8 wt. % addition of paper sludge ash to the cement raw mixture. Demetallised steel slag is suitable for production of special sulphate resistant cement clinker for CEM I –SR cement with addition up to 5 wt. %. Granulated blastfurnace slag is a suitable alternative raw material with addition 4 wt. %. Air cooled blastfurnace slag is a suitable alternative raw material with addition 4.2 wt. %. Waste glass is not very appropriate alternative raw material with addition only 1.16 wt. %. Fluidized bed combustion fly ash appears not to be equally appropriate alternative raw material for cement clinker burning with less potential utilization in the cement industry and with addition 3.41 wt. %, which forms undesired anhydrite CaSO4 in the cement clinker.

Characterization of silica quartz as raw material in photovoltaic applications

Energy Technology Data Exchange (ETDEWEB)

Boussaa, S. Anas, E-mail: sabiha.anas@gmail.com; Kheloufi, A.; Kefaifi, A.; Kerkar, F. [Division croissance cristalline et procédés métallurgiques CCPM Centre de recherche en technologie des semi-conducteurs pour l’énergétique (C.R.T.S.E) 02 Bd Frantz Fanon BP. 140 Alger 7 merveilles, Alger 16200 (Algeria); Zaourar, N. Boutarek [Laboratoire des technologies des matériaux, USTHB, B.P. 32 El Alia, Bab Ezzouar, Alger, Algérie 16111 (Algeria)

2016-07-25

Raw materials are essential for the functioning of modern societies, and access to these raw materials is vital to the world economy. Sustainable development, both globally level, raises important new challenges associated with access and efficient use of raw materials. High purity quartz, is consider as a critical raw material and it is a rare commodity that only forms under geological conditions where a narrow set of chemical and physical parameters is fulfilled. When identified and following special beneficiation techniques, high purity quartz obtains very attractive prices and is applied in high technology sectors that currently are under rapid expansion such as photovoltaic solar cells, silicon metal - oxide wafers in the semiconductor industry and long distance optical fibers that are used in communication networks. Crystalline silicon remains the principal material for photovoltaic technology. Metallurgical silicon is produced industrially by the reduction of silica with carbon in an electric arc furnace at temperatures higher than 2000 °C in the hottest parts, by a reaction that can be written ideally as: SiO{sub 2} + 2C = Si + 2CO. The aim of this study has been to test experimental methods for investigating the various physical and chemical proprieties of Hoggar quartz with different techniques: X Ray Fluorescence, infra-red spectroscopy, Scanning Electron Microscopy, Optic Microscopy, Carbon Analyzer and Vickers Hardness. The results show finally that the quartz has got good result in purity but need enrichment for the photovoltaic application.

Raw materials resources classification and characterisation for ...

African Journals Online (AJOL)

Raw materials resources classification and characterisation for ceramic tableware production in Nigeria. PSA Irabor. Abstract. No Abstract. Journal of Applied Science, Engineering and Technology Vol. 2(1) 2002: 48-52. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT.

Recovery of the secondary raw materials, recycling

International Nuclear Information System (INIS)

Chmielewska, E.

2010-01-01

In this chapter the recovery and recycling of secondary raw materials is explained. This chapter consists of the following parts: Paper and tetrapaks; Car wrecks; Scrap metal; Plastics; Used tires; Electrical and electronic equipment; Glass; Accumulators and batteries; Spent oil; Low-and non-waste technology.

Study on optimum length of raw material in stainless steel high-lock nuts forging

Science.gov (United States)

Cheng, Meiwen; Liu, Fenglei; Zhao, Qingyun; Wang, Lidong

2018-04-01

Taking 302 stainless steel (1Cr18Ni9) high-lock nuts for research objects, adjusting the length of raw material, then using DEFORM software to simulate the isothermal forging process of each station and conducting the corresponding field tests to study the effects of raw material size on the stainless steel high-lock nuts forming performance. The tests show that the samples of each raw material length is basically the same as the results of the DEFORM software. When the length of the raw material is 10mm, the appearance size of the parts can meet the design requirements.

Raw materials exploitation in Prehistory of Georgia: sourcing, processing and distribution

Science.gov (United States)

Tushabramishvili, Nikoloz; Oqrostsvaridze, Avthandil

2016-04-01

Study of raw materials has a big importance to understand the ecology, cognition, behavior, technology, culture of the Paleolithic human populations. Unfortunately, explorations of the sourcing, processing and distribution of stone raw materials had a less attention until the present days. The reasons of that were: incomplete knowledge of the archaeologists who are doing the late period archaeology (Bronze Age-Medieval) and who are little bit far from the Paleolithic technology and typology; Ignorance of the stone artifacts made on different kind of raw-materials, except flint and obsidians. Studies on the origin of the stone raw materials are becoming increasingly important since in our days. Interesting picture and situation have been detected on the different sites and in different regions of Georgia. In earlier stages of Middle Paleolithic of Djruchula Basin caves the number of basalt, andesite, argillite etc. raw materials are quite big. Since 130 000 a percent of the flint raw-material is increasing dramatically. Flint is an almost lonely dominated raw-material in Western Georgia during thousand years. Since approximately 50 000 ago the first obsidians brought from the South Georgia, appeared in Western Georgia. Similar situation has been detected by us in Eastern Georgia during our excavations of Ziari and Pkhoveli open-air sites. The early Lower Paleolithic layers are extremely rich by limestone artifacts while the flint raw-materials are dominated in the Middle Paleolithic layers. Study of these issues is possible to achieve across chronologies, the origins of the sources of raw-materials, the sites and regions. By merging archaeology with anthropology, geology and geography we are able to acquire outstanding insights about those populations. New approach to the Paleolithic stone materials, newly found Paleolithic quarries gave us an opportunities to try to achieve some results for understanding of the behavior of Paleolithic populations, geology and

Renewable resources in industry. Industrial use of agricultural and wood raw materials in Germany. 3. compl. rev. ed.

Energy Technology Data Exchange (ETDEWEB)

Peters, Dietmar

2010-11-17

The ''Action Plan for the Industrial Use of Renewable Resources'' that was adopted by the German Federal Government in 2009 is an important impulse for promoting the industrial use of renewable resources parallel to their use for energy generation. The Action Plan sets forth a broad vision, not only for a significant and sustainable increase in the proportion of biomass used in industry but also for an improvement in the efficiency of biomass use in ensuring Germany's raw material supplies while taking into account the objectives and requirements of sustainability strategies. It also aims to secure and advance Germany's role as an international leader in the industrial use of renewable resources. This brochure provides an overview of the possible industrial uses of renewable resources in Germany and illustrates the important role that agricultural raw materials and wood already play in today's industry. (orig.)

Globalization and its influence to the availability of the Raw material sources

Directory of Open Access Journals (Sweden)

Vodzinský Vladimír

2002-12-01

Full Text Available Process of globalization does not lead only to concentration of physical and financial capital, and to centralization of its managing, what can be considered as its main signs, but at same time it gives whole raw of new claims to realization of technologies and their material basis.One of very important claims is also change in structure and volume of raw materials, that is gradually viewing in increased change from consumption of so-called classical raw materials, without which it is not possible to create basic components of information technologies.Information technologies are then creating important basis for quickly developed new branches of economy.

Synergy between the Multiple Supply Chain and Green Supply Chain Management (GSCM) approaches: an initial analysis aimed at fostering supply chain sustainability

OpenAIRE

Ana Lima de Carvalho; Livia Rodrigues Ignácio; Kleber Francisco Esposto; Aldo Roberto Ometto

2016-01-01

The concept of Green Supply Chain Management (GSCM) was created in the 90s to reduce the environmental impacts of productive systems. This approach seeks to improve the environmental performance of all the participants in a supply chain, from the extraction of raw materials to the use and final disposal of the product, through relationships of collaboration or conformity between the parties. The multiple supply chains approach established by Gattorna (2009) brought to light different supply c...

Use of a new borate raw material for glaze formulation

International Nuclear Information System (INIS)

Gomez-Tena, M. P.; Moreno, A.; Bou, E.; Cook, S.; Galindo, M.

2010-01-01

The Rio Tinto Minerals company has developed a new borate (E-4972), which can be used in glaze formulation (patent WO 2007/148101). This new borate, synthesised by low-temperature calcination, fundamentally contributes five oxides: silicon oxide (SiO 2 ), aluminium oxide (Al 2 O 3 ), boron oxide (B 2 O 3 ), calcium oxide (CaO), and sodium oxide (Na 2 O), its content in B 2 O 3 being between 10 and 11% by weight. It is largely amorphous, and quartz is the major crystalline phase present. The characteristics of this new borate, such as its low solubility and ability readily to form glassy phase, enable it to be used as a raw material in glaze compositions. Its suitability for glaze formulation has been the result of several years research in collaboration with the Instituto de Tecnologia Ceramica. In this paper, the feasibility has been studied of fabricating ceramic glazes by using a new synthetic borate raw material that contributes boron to the glaze composition without this needing to be done in fritted form. It has been possible to obtain fired glazes with similar technical and aesthetics characteristics to those obtained from industrial glaze compositions that contain typical frits in their compositions, thus enabling glazes to be formulated by using the new synthetic boron raw material. The results obtained show that this new raw material (E-4972) is particularly appropriate for use in producing glazes with low gloss at high temperature. (Author) 15 refs.

Study of mechanoactivation of tungsten-molybdenum containing raw material in gas-jet mill

International Nuclear Information System (INIS)

Agnokov, T.Sh.; Gorobets, L.Zh.; Martynenko, V.P.; Fedorov, Yu.P.; Krakhmaleva, M.T.; Sokolova, L.A.

1988-01-01

Investigation is aimed at intensifying autoclave-soda leaching of tungsten-molybdenum-containing raw material. Connection of reactivity and physicochemical properties of crushed tungsten-molybdenum-containing products under different gas-jet crushing parameters is investigated. Optimal technological indices of hydrometallurgical reprocessing of tungsten-molybdenum-containing raw materials and products processed by gas-jet technique are given. The results obtained point out to perspectiveness of applying gas-jet technique of thermomechanical processing for intensifying and increasing the quality of tungsten- and molybdenum-containing raw materials and products of hydrometallurgical production

Natural radioactivity and human exposure by raw materials and end product from cement industry used as building materials

International Nuclear Information System (INIS)

Stojanovska, Z.; Nedelkovski, D.; Ristova, M.

2010-01-01

During the manufacturing process in the cement industry, raw materials of different levels of natural radioactivity are utilized. In this study we present the radiological impact of cements as a building material and the different raw materials used in their manufacture. A total of 218 samples of raw materials and their end product cements were collected from the cement industry of Macedonia (The Former Yugoslav Republic) during the period 2005-2007. The specific activities, evaluated by gamma spectrometry analysis, showed the highest mean specific activity in fly ash ( 226 Ra, 107 ± 45 Bq kg -1 ; 232 Th, 109 ± 30 Bq kg -1 ; 40 K, 685 ± 171 Bq kg -1 ), which is used as a raw material. However, the final cement product usually has relatively lower activity compared with the activity of the raw material and the mean specific activity of the final cement products were lower ( 226 Ra, 42 ± 10 Bq kg -1 ; 232 Th, 28 ± 6 Bq kg -1 ; 40 K, 264 ± 50 Bq kg -1 ). The radium equivalent activity and the hazard index were calculated for each sample to assess the radiation hazard. The mean annual effective dose originating from the cements was found to be 111 ± 22 μSv y -1 , which is below the recommended EC limit of 300 μSv y -1 .

Uncertainties in the Bidirectional Biodiesel Supply Chain

NARCIS (Netherlands)

Bot, Pieter; van Donk, Dirk Pieter; Pennink, Bartjan; Simatupang, Togar M.

2015-01-01

For remote areas, small-scale local biodiesel production is particularly attractive if producers and consumers are the same. Such supply chains are labeled as bidirectional. However, little is known on how raw material supply, transportation, logistics, production and operations uncertainties impact

Material Classification Using Raw Time-of-Flight Measurements

KAUST Repository

Su, Shuochen

2016-12-13

We propose a material classification method using raw time-of-flight (ToF) measurements. ToF cameras capture the correlation between a reference signal and the temporal response of material to incident illumination. Such measurements encode unique signatures of the material, i.e. the degree of subsurface scattering inside a volume. Subsequently, it offers an orthogonal domain of feature representation compared to conventional spatial and angular reflectance-based approaches. We demonstrate the effectiveness, robustness, and efficiency of our method through experiments and comparisons of real-world materials.

Occurrence of 1,4-dioxane in cosmetic raw materials and finished cosmetic products.

Science.gov (United States)

Black, R E; Hurley, F J; Havery, D C

2001-01-01

Surveys of cosmetic raw materials and finished products for the presence of the carcinogen 1,4-dioxane have been conducted by the U.S. Food and Drug Administration since 1979. Analytical methods are described for the determination of 1,4-dioxane in ethoxylated cosmetic raw materials and cosmetic finished products. 1,4-Dioxane was isolated by azeotropic atmospheric distillation and determined by gas chromatography using n-butanol as an internal standard. A solid-phase extraction procedure based on a previously published method for the determination of 1,4-dioxane in cosmetic finished products was also used. 1,4-Dioxane was found in ethoxylated raw materials at levels up to 1410 ppm, and at levels up to 279 ppm in cosmetic finished products. Levels of 1,4-dioxane in excess of 85 ppm in children's shampoos indicate that continued monitoring of raw materials and finished products is warranted.

Supply chain management and optimization in manufacturing

CERN Document Server

Pirim, Harun; Yilbas, Bekir Sami

2014-01-01

This book introduces general supply chain terminology particularly for novice readers, state of the art supply chain management and optimization issues and problems in manufacturing. The book provides insights for making supply chain decisions, planning and scheduling through supply chain network. It introduces optimization problems, i.e. transportation of raw materials, products and location, inventory of plants, warehouses and retailers, faced throughout the supply chain network.

Mineral raw materials for power production in legislation of the Republic of Croatia

International Nuclear Information System (INIS)

Matisa, Z.

1999-01-01

According to the Constitution of the Republic of Croatia, mineral wealth is a public good of legal interest to the Republic of Croatia and enjoys its special protection. The Mining Law establishes that mineral wealth (including mineral resources that are used for power production) is the property of the Republic of Croatia. Among other mineral raw materials, this refers to mineral raw materials that are used for power production: coal, oil, natural gas, radioactive mineral raw materials and geothermal waters. These mineral resources are as almost all other mineral raw materials with the exception of geothermal waters, an unrecoverable natural resource. The right to use that natural resource may be granted only by a concession. The mining legislation provides for exploration and exploitation of mineral raw materials. Exploration of oil and gas is considered to comprise operations and testing with the aim to establish the existence, position and form of oil and natural gas deposits, their quality and quantity, as well as exploitation conditions. Exploitation of oil and natural gas is considered to comprise extraction from deposits, refining and transport, as well as disposal in geological structures. Mineral raw materials used in power production amount to 63% of national total primary energy production, and they cover 33% of total power consumption in the country. Legislation in the Republic of Croatia, which refers to exploration and exploitation of oil and natural gas, allows economic utilization of that unrecoverable natural wealth to run smoothly and in compliance with practices in our European environment. (author)

Partial costs of global climate change adaptation for the supply of raw industrial and municipal water: a methodology and application

NARCIS (Netherlands)

Ward, P.J.; Strzepek, K.; Pauw, W.P.; Brander, L.M.; Hughes, G.; Aerts, J.C.J.M.

2010-01-01

Despite growing recognition of the importance of climate change adaptation, few global estimates of the costs involved are available for the water supply sector. We present a methodology for estimating partial global and regional adaptation costs for raw industrial and domestic water supply, for a

Extraction of protoactinium from silicaceous raw material

Energy Technology Data Exchange (ETDEWEB)

Broda, E.

1946-07-01

This report was written by E. Broda and P.K. Wright at the Cavendish Laboratory (Cambridge) in March 1946 and is about the Extraction of protoactinium from a silicaceous raw material. In this report the isolation of Pa on Er carrier is described and it includes the experiment description and the discussion of the results. (nowak)

Evolution and characterization of eggshell as a potential candidate of raw material

Directory of Open Access Journals (Sweden)

T. Zaman

Full Text Available Abstract Characterization of both uncalcined and calcined eggshells was done in this work. Raw eggshells turned out as a good source of calcite phase. Calcined eggshells had a mixture of lime and portlandite phase. A significant impact of calcination temperature on the percentage of generated phases was observed. Qualitative as well as semi-quantitative phase analysis, morphological characterization and physical property estimation was done for the produced powder. The influence of synthesized raw material on soil stabilization and biomaterial formation was further assessed. The eggshell turned out as a potential source of raw material for various sectors.

Evaluation of aflatoxins and Aspergillus sp. contamination in raw peanuts and peanut-based products along the supply chain in Malaysia.

Science.gov (United States)

Norlia, Mahror; Nor-Khaizura, M A R; Selamat, Jinap; Abu Bakar, Fatimah; Radu, Son; Chin, Cheow Keat

2018-06-18

The peanut supply chain in Malaysia is dominated by three main stakeholders (importers, manufacturers, retailers). The present study, aimed to determine the levels and critical points of aflatoxins and fungal contamination in peanuts along the supply chain. Specifically, two types of raw peanuts and six types of peanut-based products were collected (N = 178). Samples were analysed for aflatoxins by using High Performance Liquid Chromatography. Results revealed that the aflatoxins contamination was significantly higher (P≤0.05) in raw peanuts and peanut-based products from the retailers. However, there was no significant different (P≥0.05) in fungal contamination for both types of peanuts except for the total fungal count in raw peanuts from the retailers. Furthermore, raw peanut kernels from the retailers were the most contaminated ones ranged from contamination (0.3 - 3.6 log CFU/g) was relatively higher in raw peanuts compared to that of peanut-based products (0.6 - 2.7 log CFU/g). In conclusion, the manufacturers and retailers were the critical points for aflatoxins contamination in peanuts. However, fungal contamination was more critical in the raw peanuts compared to peanut-based products. The study was limited by a minimal number of samples from the importer. Therefore, further investigations on a larger sample size should be conducted to confirm the findings in this present study.

Effect of the raw materials processing on their dustiness

International Nuclear Information System (INIS)

López Lilaoa, A.; Juárezb, M.; Sanfelix Fornera, V.; Mallol Gascha, G.; Monfort Gimeno, E.

2017-01-01

During the handling and/or processing of powdered materials in the CERAMICS INDUSTRY, one of the most important risks regarding the environmental and occupational health is the potential generation of dust. In this regard, a parameter of great interest is the dustiness of the processed materials; this parameter quantifies the tendency of the powdered materials to generate dust when handled. In this study, to determine the dustiness of a ceramic raw material composition (mixture of the body raw materials), the continuous drop method has been used. This test apparatus was selected because it is considered to better simulate how ceramic materials are handled in the CERAMICS INDUSTRY. The obtained results show that the dustiness of the same ceramic composition exhibits significant changes during the manufacturing process, depending on the presentation form. In this regard, the dry milling sample presents the highest dustiness, which can be significantly reduced (>75%) applying the the moisturization and agglomeration. The obtained results also shown that the best presentation form, regarding the minimization of the dust generation, is achieved in the spray-drying process, where the dustiness is reduced by 95%. [es

Replacement of reserves zinc based on the recycling of technogenic raw materials

Directory of Open Access Journals (Sweden)

Olga Sergeevna Bryantseva

2013-06-01

Full Text Available In the article, the perspective trends of the expansion of the mineral-ore base of the Russian producers of zinc by recycling of technogenic raw materials are considered. The important role of recycling of resources for sustainable development of society and improve the environmental safety is justified. The main structural and dynamic characteristics of the use of mineral resource base for the production of zinc in Russia are considered. Raw materials opportunities and constraints for the development of zinc production are analyzed. In the paper, the structure and dynamics of the use of recycled materials by the largest producer of zinc in Russia are investigated. The methodical approach to the estimation of effectiveness of the industrial processing of technogenic metallurgical raw materials with the strategic flexibility of the implementation of projects is proposed and approved. The estimation of the effectiveness of a complex industrial processing of metallurgical zinc-containing dusts in a real production is carried out. The value of the strategic flexibility of the project of the industrial processing of the zinc-containing technogenic raw material is determined on the basis of the developed systematic approach. The value of the processes of recycling for sustainable production of zinc in Russia is revealed.

Anthropogenic materials and products containing natural radionuclides. Pt. 1a. Radiation properties of raw materials and waste materials. A literature study

International Nuclear Information System (INIS)

Reichelt, A.; Roehrer, J.; Lehmann, K.H.

1995-12-01

Cased on the literature study, the publication presents relevant data on raw materials and wastes containing natural radionuclides. The study is part 1a of the project on ''Anthropogenic materials and waste materials containing natural radionuclides''. Part 1 of the project gives data and information on about 100 different materials and wastes or products for household or industrial applications which contain significant amounts of natural radioactivity. In addition, part 1 presents for some of these materials information on their applications, consumption, radioactivity and resulting radiation doses. The raw materials and waste materials on the list in part 1 are characterised in this 1a report. Wherever appropriate, two or more materials are dealt with in one chapter, as e.g. felspar and felspar sands (pegmatite), talcum, and soapstone. The wastes are dealt with in the chapters discussing the relevant raw materials. The information given is as derived from the literature and does not include comments or evaluation by the authors of this report. Whenever the literature study did not yield information on radiological aspects of a material on the list, an appropriate notice is given. (Orig./DG) [de

Raw material consumption of the European Union--concept, calculation method, and results.

Science.gov (United States)

Schoer, Karl; Weinzettel, Jan; Kovanda, Jan; Giegrich, Jürgen; Lauwigi, Christoph

2012-08-21

This article presents the concept, calculation method, and first results of the "Raw Material Consumption" (RMC) economy-wide material flow indicator for the European Union (EU). The RMC measures the final domestic consumption of products in terms of raw material equivalents (RME), i.e. raw materials used in the complete production chain of consumed products. We employed the hybrid input-output life cycle assessment method to calculate RMC. We first developed a highly disaggregated environmentally extended mixed unit input output table and then applied life cycle inventory data for imported products without appropriate representation of production within the domestic economy. Lastly, we treated capital formation as intermediate consumption. Our results show that services, often considered as a solution for dematerialization, account for a significant part of EU raw material consumption, which emphasizes the need to focus on the full production chains and dematerialization of services. Comparison of the EU's RMC with its domestic extraction shows that the EU is nearly self-sufficient in biomass and nonmetallic minerals but extremely dependent on direct and indirect imports of fossil energy carriers and metal ores. This implies an export of environmental burden related to extraction and primary processing of these materials to the rest of the world. Our results demonstrate that internalizing capital formation has significant influence on the calculated RMC.

Efficiency of raw materials. Relief of the economy, environmental protection; Rohstoffeffizienz. Wirtschaft entlasten, Umwelt schonen

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-11-15

In the contribution under consideration, the Federal Statistical Office (Wiesbaden, Federal Republic of Germany) and the Federal Environmental Agency (Dessau-Rosslau, Federal Republic of Germany) present actual data and analyses from environmentally economic total computations. In Germany, the use of raw materials became more efficient. Thus, 580 tons of raw materials per million Euro of gross domestic product were needed in the year 2008, while still 680 tons of raw materials were needed in the year 2000. The economical handling of natural resources relieves the environment and enables economic chances for individual companies and national economy. The lowering of environmental effects is to be in the focus of withdrawal and use of raw materials. This requires a stronger reduction of the consumption of raw materials. Savings potentials and an increased efficiency must be aspired in the short and medium term. The politics must create suitable incentives and framework conditions. The contribution under consideration presents new activities and strategies in order to achieve these targets.

119-132 Microbiological Quality of Raw Cow Milk across the Milk ...

African Journals Online (AJOL)

t

equipment of producers in rural areas of Babile district; from the equipment of .... pastoral areas is supplied to urban centers through informal milk marketing channels ... raw milk across the milk supply chain to ensure safety and suitability ... Materials and Methods. 2.1. ... Ethiopia at 9°36′ N latitude and 41°52′ E longitude.

Game Theoretical Approach to Supply Chain Microfinance

OpenAIRE

Sim , Jaehun; Prabhu , Vittaldas ,

2013-01-01

Part 1: Sustainable Production; International audience; This paper considers a supply chain microfinance model in which a manufacturer acts as a lender and a raw material supplier as a borrower. Using a game theoretical analysis, the study investigates how investment levels, raw material prices, and profit margins are influenced by loan interest rates under two types of decentralized channel policies: manufacturer Stackelberg and vertical Nash game. In addition, the study shows how the profit...

Utilization of Iron Ore Tailings as Raw Material for Portland Cement Clinker Production

Directory of Open Access Journals (Sweden)

Li Luo

2016-01-01

Full Text Available The cement industry has for some time been seeking alternative raw material for the Portland cement clinker production. The aim of this research was to investigate the possibility of utilizing iron ore tailings (IOT to replace clay as alumina-silicate raw material for the production of Portland cement clinker. For this purpose, two kinds of clinkers were prepared: one was prepared by IOT; the other was prepared by clay as a reference. The reactivity and burnability of raw meal, mineralogical composition and physical properties of clinker, and hydration characteristic of cement were studied by burnability analysis, differential thermal analysis, X-ray diffraction, and hydration analysis. The results showed that the raw meal containing IOT had higher reactivity and burnability than the raw meal containing clay, and the use of IOT did not affect the formation of characteristic mineralogical phases of Portland cement clinker. Furthermore, the physical and mechanical performance of two cement clinkers were similar. In addition, the use of IOT was found to improve the grindability of clinker and lower the hydration heat of Portland cement. These findings suggest that IOT can replace the clay as alumina-silicate raw material for the preparation of Portland cement clinker.

Identification of dissolved organic matter in raw water supply from reservoirs and canals as precursors to trihalomethanes formation.

Science.gov (United States)

Musikavong, Charongpun; Wattanachira, Suraphong

2013-01-01

The characteristic and quantity of dissolved organic matter (DOM) as trihalomethanes precursors in water from the U-Tapao Basin, Songkhla, Thailand was investigated. The sources of water in the basin consisted of two reservoirs and the U-Tapao canal. The canal receives water discharge from reservoirs, treated and untreated wastewater from agricultural processes, communities and industries. Water downstream of the canal is utilized as a raw water supply. Water samples were collected from two reservoirs, upstream and midstream of the canal, and the raw water supply in the rainy season and summer. The DOM level in the canal water was higher than that of the reservoir water. The highest trihalomethane formation potential (THMFP) was formed in the raw water supply. Fourier-transform infrared peaks of the humic acid were detected in the reservoir and canal waters. Aliphatic hydrocarbon and organic nitrogen were the major chemical classes in the reservoir and canal water characterized by a pyrolysis gas chromatography mass spectrometer. The optimal condition of the poly aluminum chloride (PACl) coagulation was obtained at a dosage of 40 mg/L at pH 7. This condition could reduce the average UV-254 to 57%, DOC to 64%, and THMFP to 42%. In the coagulated water, peaks of O-H groups or H-bonded NH, C˭O of cyclic and acyclic compounds, ketones and quinines, aromatic C˭C, C-O of alcohols, ethers, and carbohydrates, deformation of COOH, and carboxylic acid salts were detected. The aliphatic hydrocarbon, organic nitrogen and aldehydes and ketones were the major chemical classes. These DOM could be considered as the prominent DOM for the water supply plant that utilized PACl as a coagulant.

TATA LETAK GUDANG RAW MATERIAL CHEMICAL MENGGUNAKAN METODE SHARED STORAGE DAN REL SPACE

Directory of Open Access Journals (Sweden)

Indramawan Hadi Kuswoyo

2016-04-01

Full Text Available Storage system in the manufacturing industry in this modern era is a very important role especially international scale company, may not directly produce or distribute all of the work unit. this led to the need for raw materials warehouse, warehouse storage systems should not be large in size because if supported by a good inventory of the warehouse to the maximum utilization of the problems faced by the company occurred in the warehouse of raw materials (raw materials. deficiencies in the arrangement of items in the warehouse procedures cause problems in the warehouse, so the warehouse impressed narrow and less structured cause inefficiencies time retrieval and storage of materials, as well as complicate the operator in handling the placement process raw materials. In the method of shared storage and rail space (relationchip chart for the relationship between activity is indicated by activity relationship approach, which shows each activity as a single activity model in the form of a diagram. ARD basic idea of the link between patterns of flow of goods and location of service activities related to production activities. ARD is the development of ARC (activity relationship chart.

Gas condensate--raw material for producing liquid paraffin hydrocarbons

Energy Technology Data Exchange (ETDEWEB)

Aliyeva, R.B.; Alikishi-Zade, G.Yu.; Kuliyev, A.M.; Leonidov, A.N.; Pereverzev, A.N.

1980-01-01

The problem of efficient utilization of gas condensates as raw material for removal of a valuable product, liquid paraffins, is examined. A classification of gas condensates is given which is used as raw material for removing these hydrocarbons: gas condensate with high content of n-alkanes (25-40 mass percent), with average content (18-25 mass percent), with low content (12-18 mass percent), light weight fractions compositions, which do not contain fractions up to 200/sup 0/, and also, content ofless than 12% n-alkanes. Gas condensate I-III groups are 30% of the total reserve of gas condensate. Liquid paraffins hydrocarbons, produced from fractions of diesel fuel, which has been removed from Shatlyk gas condensate under conditions which simulate virtual processes of caramide deparaffinization meet all requirements without additional refining.

Agaves as a raw material: recent technologies and applications.

Science.gov (United States)

Narváez-Zapata, J A; Sánchez-Teyer, L F

2009-01-01

Agave plants are a valuable source of raw material due to its fibrous and complex sugar content of their leaves and core, and their bagasse waste can be use for several aims. This plant genus belongs to the Agavaceae family and until now more than 200 species have been described. A large number of Agave species are currently used as raw material in several biotechnological processes. This review shows the reported applications and patents on fields like alcoholic brewages with special reference to Tequila and Mezcal, the isolation and use of compounds such as saponins and agave fructans, and their potential biotechnological application on several human demands. The process to obtain fibers and cellulose, stock feeds, and several miscellaneous extractives are also reviewed. Some possibilities and problems of cultivation are discussed.

Development and Testing the Technology of Complex Transformation of Carbohydrates from Vegetable Raw Materials into Bioethanol

Directory of Open Access Journals (Sweden)

S.P. Tsygankov

2013-07-01

Full Text Available Results of development and testing the tentative technology of sweet sorghum and finger millet processing into bioethanol are described. The carbohydrates content and range of the studied vegetable biomass as the raw material is defined. Bioethanol potential output from sugar sorghum and finger millet carbohydrates and key technological parameters of preparation of both types of vegetable raw material for alcohol fermentation are defined. The concept of the tentative technology of bioethanol production from carbohydrate raw material of the first and second generations is offered. Testing of complex transformation of carbohydrates from vegetable raw materials into bioethanol is performed.

Alternative of raw material’s suppliers using TOPSIS method in chicken slaughterhouse industry

Science.gov (United States)

Sari, R. M.; Rizkya, I.; Syahputri, K.; Anizar; Siregar, I.

2018-02-01

Chicken slaughterhouse industry is one of the fastest growing industries that depends on the freshness of raw materials. The raw materials quality arrive at the company depends heavily on the suppliers. Fresh chicken and frozen chicken meat are the main raw materials for this industry. Problems occurred by the suppliers are catering the amount of raw material needs that are not appropriate and also delay during delivery process. This condition causes disruption of the production process in the company. Therefore, it is necessary to determine the best suppliers to supply the main raw materials of fresh and frozen chicken meat on the slaughterhouse chicken industry. This study analyze the supplier’s capability by using TOPSIS method. This method use to find out the best supplier. The TOPSIS method is performed using the principle that chosen alternative must have the shortest distance from the positive solution and furthest from the ideal solution of the geometric point by using the Euclidean distance to determine the relative proximity of the optimum solution alternative. TOPSIS method found the rank of best supplier’s order is supplier A followed by supplier D, supplier B, supplier C, supplier E, supplier F, and supplier G. Based on the rank order obtained from each company, it will assist the company in prioritizing the order to the supplier with the best rank. Total supply from All suppliers are 885,994 kg per month. Based on the results of research, the top five suppliers have been sufficient to meet the needs of the company.

Solution of environmental protection problems and complex utilization of raw materials during mining and processing of uranium ores

International Nuclear Information System (INIS)

Litvinenko, V.G.; Savva, P.P.

1993-01-01

Consideration is given to the complex of measures taken in Priargunsky industrial mine-chemical association and directed to environment protection, complex utilization of raw materials during mining and processing of uranium ores. These measures include: 1) reduction of toxic chemical agent effluents into atmosphere due to introduction of new methods and gas cleaning systems; 2) rational use of water resources owing to application of circulating water supply systems, waste waters treatment and effective control of the state of water consumption by industrial enterprises; 3) utilization of gangue and industrial solid wastes

Estimation of raw material performance in mammalian cell culture using near infrared spectra combined with chemometrics approaches.

Science.gov (United States)

Lee, Hae Woo; Christie, Andrew; Liu, Jun Jay; Yoon, Seongkyu

2012-01-01

Understanding variability in raw materials and their impacts on product quality is of critical importance in the biopharmaceutical manufacturing processes. For this purpose, several spectroscopic techniques have been studied for raw material characterization, providing fast and nondestructive ways to measure quality of raw materials. However, investigations of correlation between spectra of raw materials and cell culture performance have been scarce due to their complexity and uncertainty. In this study, near-infrared spectra and bioassays of multiple soy hydrolysate lots manufactured by different vendors were analyzed using chemometrics approaches in order to address variability of raw materials as well as correlation between raw material properties and corresponding cell culture performance. Principal component analysis revealed that near-infrared spectra of different soy lots contain enough physicochemical information about soy hydrolysates to allow identification of lot-to-lot variability as well as vendor-to-vendor differences. The identified compositional variability was further analyzed in order to estimate cell growth and protein production of two mammalian cell lines under the condition of varying soy dosages using partial least square regression combined with optimal variable selection. The performance of the resulting models demonstrates the potential of near-infrared spectroscopy as a robust lot selection tool for raw materials while providing a biological link between chemical composition of raw materials and cell culture performance. Copyright © 2012 American Institute of Chemical Engineers (AIChE).

Microalgae as a raw material for biofuels production.

Science.gov (United States)

Gouveia, Luisa; Oliveira, Ana Cristina

2009-02-01

Biofuels demand is unquestionable in order to reduce gaseous emissions (fossil CO(2), nitrogen and sulfur oxides) and their purported greenhouse, climatic changes and global warming effects, to face the frequent oil supply crises, as a way to help non-fossil fuel producer countries to reduce energy dependence, contributing to security of supply, promoting environmental sustainability and meeting the EU target of at least of 10% biofuels in the transport sector by 2020. Biodiesel is usually produced from oleaginous crops, such as rapeseed, soybean, sunflower and palm. However, the use of microalgae can be a suitable alternative feedstock for next generation biofuels because certain species contain high amounts of oil, which could be extracted, processed and refined into transportation fuels, using currently available technology; they have fast growth rate, permit the use of non-arable land and non-potable water, use far less water and do not displace food crops cultures; their production is not seasonal and they can be harvested daily. The screening of microalgae (Chlorella vulgaris, Spirulina maxima, Nannochloropsis sp., Neochloris oleabundans, Scenedesmus obliquus and Dunaliella tertiolecta) was done in order to choose the best one(s), in terms of quantity and quality as oil source for biofuel production. Neochloris oleabundans (fresh water microalga) and Nannochloropsis sp. (marine microalga) proved to be suitable as raw materials for biofuel production, due to their high oil content (29.0 and 28.7%, respectively). Both microalgae, when grown under nitrogen shortage, show a great increase (approximately 50%) in oil quantity. If the purpose is to produce biodiesel only from one species, Scenedesmus obliquus presents the most adequate fatty acid profile, namely in terms of linolenic and other polyunsaturated fatty acids. However, the microalgae Neochloris oleabundans, Nannochloropsis sp. and Dunaliella tertiolecta can also be used if associated with other

Critical thinking: assessing the risks to the future security of supply of critical metals

Science.gov (United States)

Gunn, Gus

2015-04-01

Increasing world population, the spread of prosperity across the globe and the demands of new technologies have led to a revival of concerns about the availability of raw materials needed by society. Despite scare stories about resource depletion, physical exhaustion of minerals is considered to be unlikely. However, we do need to know which materials might be of concern so that we can develop strategies to secure adequate supplies and to mitigate the effects of supply disruption. This requirement has led to renewed interest in criticality, a term that is generally used to refer to metals and minerals of high economic importance that have a relatively high likelihood of supply disruption. The European Union (EU) developed a quantitative methodology for the assessment of criticality which led to the definition of 14 raw materials as critical to the EU economy (EC, 2010). This has succeeded in raising awareness of potential supply issues and in helping to prioritise requirements for new policies and supporting research. The EU has recently assessed a larger number of candidate materials of which 20 are now identified as critical to the EU (EC, 2014). These include metals such as indium, mostly used in flat-screen displays, antimony for flame retardants and cobalt for rechargeable batteries, alloys and a host of other products. Although there is no consensus on the methodology for criticality assessments and broad analyses at this scale are inevitably imperfect, they can, nevertheless, provide early warning of supply problems. However, in order to develop more rigorous and dynamic assessments of future availability detailed analysis of the whole life-cycle of individual metals to identify specific problems and develop appropriate solutions is required. New policies, such as the Raw Materials Initiative (2008) and the European Innovation Partnership on Raw Materials (2013), have been developed by the European Commission (EC) and are aimed at securing sustainable

Raw material selection for object construction

CSIR Research Space (South Africa)

Perlow, J

2017-11-01

Full Text Available on their visual appearance. In particular, we present a method for an agent to recognise the required unseen raw material images and link them to corresponding novel object images. This capability provides an agent with an increased degree of resourcefulness... construction from component parts, and in doing so we provide a benchmark for future work to compare against within Minecraft and ShapeNet domains. II. BACKGROUND Our model is inspired by Siamese neural networks, a class of neural network that includes multiple...

Mineralogy And Raw Material Characterization Of Esie Stone ...

African Journals Online (AJOL)

Electronprobe mineral data of samples of Esie statues is presented as a possible tool for provenance studies. Most of the samples contain talc, chlorite, cummingtonite and rarely tremolite. Other talc-bearing schists are prevalent in the Esie area. However talc-cummingtonite rocks, similar to the raw materials used for the ...

CONTRIBUTION TO THE STATISTICAL INTERPRETATION OF RAW MATERIALS FOR THE CEMENT INDUSTRY OF SPLIT

Directory of Open Access Journals (Sweden)

Miroslav Matijaca

1990-12-01

Full Text Available Up to the last two decades cement was produced from mari called »tupina« (with about 76% CaCOj which is an ideal mixture for cement production. Due to the quantity decrease of this raw material, cement production went on using the mixture of other members of the flysch series: limestones, marls, clay, loess, sandstones a.o. By the analysis of natural materials the CaCO^ content has mostly been proved. Therefore, knowing the correlation of oxides in mineral raw material is of special significance. The article discusses investigation results of the correlation between CaCO-i and other oxides of the raw material (the paper is published in Croatian.

Exploring China's materialization process with economic transition: analysis of raw material consumption and its socioeconomic drivers.

Science.gov (United States)

Wang, Heming; Tian, Xin; Tanikawa, Hiroki; Chang, Miao; Hashimoto, Seiji; Moriguchi, Yuichi; Lu, Zhongwu

2014-05-06

China's rapidly growing economy is accelerating its materialization process and thereby creating serious environmental problems at both local and global levels. Understanding the key drivers behind China's mass consumption of raw materials is thus crucial for developing sustainable resource management and providing valuable insights into how other emerging economies may be aiming to accomplish a low resource-dependent future. Our results show that China's raw material consumption (RMC) rose dramatically from 11.9 billion tons in 1997 to 20.4 billion tons in 2007, at an average annual growth rate at 5.5%. In particular, nonferrous metal minerals and iron ores increased at the highest rate, while nonmetallic minerals showed the greatest proportion (over 60%). We find that China's accelerating materialization process is closely related to its levels of urbanization and industrialization, notably demand for raw materials in the construction, services, and heavy manufacturing sectors. The growing domestic final demand level is the strongest contributor of China's growth in RMC, whereas changes in final demand composition are the largest contributors to reducing it. However, the expected offsetting effect from changes in production pattern and production-related technology level, which should be the focus of future dematerialization in China, could not be found.

Optimizing Pretreatment of Medicinal Raw Materials by RFC Plasma before Extraction

Directory of Open Access Journals (Sweden)

O.Yu. Kuznetsova

2016-06-01

Full Text Available Optimization of the RF-plasma treatment modes of chaga raw materials using the Statistica 6.0 software package has been performed. Mathematical design has been carried out to calculate the optimum parameters of RF-plasma treatment using three plasma-forming gases – argon, air, and nitrogen. Plasma treatment of chaga raw materials has been undertaken at the constant parameters: pressure P = 30.0 Pa, anodic current J = 0.7 A, gas consumption G = 0.04 g/s; the variable parameters were power U = 5.0÷7.0 kV and treatment duration at the high-frequency capacitor category of the lowered pressure t = 30÷60 min. Optimization of four key parameters for extraction of chaga raw materials (solid residue, melanin yield, antioxidant activity of both extract and chaga melanin depending on the chosen plasma-forming gas (argon, air, or nitrogen has been achieved. The optimum modes of RF-plasma treatment allowing to obtain the extracts and melanin of chaga mushroom with the improved physicochemical and antioxidant characteristics have been calculated.

New and non-traditional mineral raw materials deposits, perspectives of use

International Nuclear Information System (INIS)

Beyseev, O.; Beyseev, A.; Baichigasov, I.; Sergev, E.; Shakirova, G.

1996-01-01

Deposits of new and non-traditional kinds of mineral raw material are revealed, explored and prepared to industrial recovery in Kazakstan, that can be used in frames of conversion process to create new materials with unique properties, to prepare base for new technologies elaboration, and to achieve appreciable economic benefit. These deposits are located mostly in geographic and economic conditions of advanced infrastructure and mining works network, favorable for recovery.On the tests results the following is of heaviest interest: RHODUCITE, NEMALITE-CONTAINING CHRYSOTILE-ASBESTOS, NICKEL-CONTAINING SILICATE-ASBOLAN ORES, MEDICINAL MINERALS, SHUNGITES, FULLERENES, RAW QUARTZ MINERALS - the group of deposits containing 5 min tons of high quality quartz good for manufacture of cut-glass and fibre-optical articles, is explored in details. There are also deposits of other kinds of non-traditional strategic mineral raw material in the Republic of Kazakstan - natural fillers, that can be used in the national economy of the country and bring considerable economic benefit: chrysotile-asbestos, amphibole-asbestos, talk, vollastonite, tremolite, actinolite, vermiculite, zeolite, etc

Characterization of Lignocellulosic Biomass as Raw Material for the Production of Porous Carbon-based Materials

Directory of Open Access Journals (Sweden)

Saptadi Darmawan

2016-02-01

Full Text Available Lignocellulosic biomass is a potential raw material that can be used in the synthesis (manufacture of porous carbon stuffs. The properties of such porous carbon products are affected by the species of the raw material and the manufacturing process, among other things. This paper scrutinizes the related characteristics of lignocellulosic raw materials that indicate potential for the production of porous carbon. Three species were used: pine (Pinus merkusii wood, mangium (Acacia mangium wood, and candlenut (Aleurites moluccana shells, representing softwoods, hardwoods, and non-wood stuffs, respectively. Analyses of their chemical compounds and proximate contents were carried out. Additionally, nano scale scrutiny of the lignocellulosic biomass was also conducted using the nano capable instruments, which consisted of SEM, EDS, XRD, FTIR, and DSC. Results revealed that pine wood had the most potential to produce porous carbon. Morphologically, pine wood afforded the best permeability, whereby at the structure of monoclinic cellulose crystals, there were cellulose-I(alpha structures, which contained less cellulose-I(beta structures. Furthermore, pine wood exhibited greater volatile matter content, as confirmed through the FTIR, which greatly assisted the forming of porosity inside its corresponding carbon.

Investigations of radioactivity of building raw and materials

International Nuclear Information System (INIS)

Zak, A.; Biernacka, M.; Jagielak, J.; Lipinski, P.

1993-01-01

In 1980, Ministry of Building and Building Materials Industry, the Central Laboratory for Radiological Protection (abbreviated as CLRP), Ministry of Health and Social Welfare have agreed to issue the compulsory regulation of performing the validation of investigations of building raw and materials. Methods of measurement, apparatus and method of evaluation of results of the investigations have been recommended for the whole country. The following two criteria of usefulness of a building material for housing and public building have been accepted, f 1 = 0.00027 S K + 0.0027 S Ra0 .0043 S Th ≤ 1 (this one limit exposition of the whole body to gamma radiation); f 2 = S Ra ≤ 185 Bq/kg (this one limits exposition of lung epithelium to progeny of radon 222 Rn exhaled from the building walls). The CLRP and Institute of Building Technology supervise over correctness (agreement with the regulations) of operation of laboratories in Departments of Building Industry and Energy, organize training of the personnel and collect results of the measurements. From 1980 till 1991, results of measurements of 6550 samples from 550 localities were collected in computer data base organized in CLRP. In this paper, results of examination of selected groups of building raw and materials have been presented. Annual average values of the qualification coefficients f 1 and f 2 have been also analyzed. (author). 7 refs, 13 figs, 2 tabs

Technological project of serpentine raw material milling from Dobšiná heaps

Directory of Open Access Journals (Sweden)

Alena Pietriková

2005-11-01

Full Text Available Serpentine heaps in the surrounding of Dobšiná are an old ecological problem of the city and at the same time a suitable material for the production of MgCl2 and SiO2. The technology of the production is based on the chemical processing of the raw material, which is preceded by the raw material preparation comprising of the mechanical and hydraulic sorting, milling and the magnetic separation operations.

Contamination of the cement raw material in a quarry site by seawater intrusion, Darica-Turkey

Science.gov (United States)

Camur, M. Zeki; Doyuran, Vedat

2008-02-01

The open pit mining nearby shoreline is planned to be extended into below sea level in order to use additional reserves of the cement raw material (marl). The raw material is currently contaminated by seawater intrusion below a depth of 20 m up to the distance of 90 m from shoreline. Seawater intrusion related contamination of the material used for the cement production was investigated by means of diffusion process for the future two below sea level mining scenarios covering 43 years of period. According to the results, chloride concentrations higher than the tolerable limit of a cement raw material would be present in the material about 10-25 cm inward from each discontinuity surface, controlling groundwater flow, located between 170 and 300 m landward from the shoreline at below sea level mining depths of 0-30 m. The estimations suggest that total amounts of dilution required for the contaminated raw material to reduce its concentration level to the tolerance limit with uncontaminated raw material are about 113- to 124-fold for scenario I (13 years of below sea level mining after 30 years of above sea level mining) and about 126- to 138-fold for scenario II (43 years of simultaneous above and below sea level minings).

To the question of peculiarities of thermal activation of natural siliceous raw material

Directory of Open Access Journals (Sweden)

Chumachenko Natalya

2017-01-01

Full Text Available The results of research of activity enhancement of natural siliceous raw material are given in the article. Fossil meal of Khotynetsky deposit, diatomite of Sharlovsky deposit, silica clay of Balasheika deposit were used as natural active mineral admixtures. The influence of heat-treating temperature and dispersion on activity of different types of siliceous raw material is studied. The increase of activity of fixation of Ca(OH2 in several times is traced after heat-treating at a certain temperature in the range from 100 to 800°C. The type of activity change is discovered. Explanation is given connected with the change of silica structure in the surface layer. Parameters of the highest activity are defined for every type of siliceous raw material.

Influence of raw material properties upon critical quality attributes of continuously produced granules and tablets

DEFF Research Database (Denmark)

Fonteyne, Margot; Wickström, Henrika; Peeters, Elisabeth

2014-01-01

over a range of raw material attributes, manufacturing process options and process parameters. This fits further into the Process Analytical Technology (PAT) and Quality by Design (QbD) framework. The present study evaluates the effect of variation in critical raw material properties on the critical......-Lactose-PVP (30-67.5-2.5%) was used as model formulation. Seven different grades of theophylline were granulated. Afterward, the obtained granules were tableted. Both the characteristics of granules and tablets were determined. The results show that differences in raw material properties both affect...... quality attributes of granules and tablets, produced by a continuous from-powder-to-tablet wet granulation line. The granulation process parameters were kept constant to examine the differences in the end product quality caused by the variability of the raw materials properties only. Theophylline...

Conditions for new biofuel raw materials. Systems for small scale briquetting and pelletizing; Foerutsaettningar foer nya biobraensleraavaror. System foer smaaskalig brikettering och pelletering

Energy Technology Data Exchange (ETDEWEB)

Paulrud, Susanne; Holmgren, Kristina (The Swedish Environmental Research Institute Ltd., Stockholm (Sweden)); Rosenqvist, Haakan; Boerjesson, Paal (Environmental and Energy Systems Studies, Lund Inst. of Technology, Lund (Sweden))

2009-01-15

limited by the raw material's combustion characteristics. Reed canary grass has the best potential nationally to be used as a raw material in small-scale production plants. For reed canary grass, briquette production is favourable over pellet production because pellets production is more expensive, involves a more advanced process and is dependent on a small-scale household market in order to be profitable. The results show that a price difference of 90 Swedish kronor/MWh between reed canary grass in bales and briquettes is sufficient for briquette production to be more profitable than bales for larger heating plants. The production of pellets from the products of thinning and precommercial thinning in small local plants can become a viable alternative where a shortage of traditional raw materials (e.g. sawmill waste) begins to limit the supply of cheap raw materials to larger pellets production plants. However, this is dependant on the technology and methods becoming more cost effective and on the demand for refined biomass continuing to increase. One alternative is biomass polygeneration in combined heat and power plants where pellets are produced from forestry raw materials. In the introductory phase, it may be of interest to use existing technology in the form of mobile pellet plants

Buildings materials and raw materials as a source of exposition of population of the Slovak Republic

International Nuclear Information System (INIS)

Cabanekova, H.

2005-01-01

In this presentation author presents specific activities of potassium-40, radium-226, thorium-232 and equivalent of specific activity in some building materials and raw materials used at building-up of flats in the Slovak Republic

Long term assurance of supply of heavy water

International Nuclear Information System (INIS)

1978-01-01

The answer of Switzerland and Great Britain to a number of questions concerning the long-term assurance of the supply of heavy water are presented. The original problems are seen in the wider context of raw materials supply and its assurance in general. Non-proliferation aspects are touched

Current problems of raw fish material processing while manufacturing dried products

Directory of Open Access Journals (Sweden)

Yashonkov A. A.

2017-09-01

Full Text Available The substantiation for using techniques of fish raw material canning has been presented, raw fish being caught or farmed in aquaculture. The main problems in raw fish canning have been reviewed, including significant reduction in thermolabile vitamins in the ultimate product as compared with the raw material due to the thermal processing. Promising canning technique – vacuum drying – has been proposed. This technique makes possible to reduce the temperature of thermal processing down to 50…55 °С and significantly enlarge preservation of thermolabile vitamins from the raw fish. Sampling of raw materials, semi-finished products, finished products, including preparation for analysis has been conducted by standard methods. Disadvantages of this way have been found, it is low energy efficiency of the process. The way to intensify the vacuum drying of aquatic organisms has been proposed based on the method of preliminary pore-forming due to augmenting the area of moisture evaporation. The design of the pilot plant has been proposed in order to research the process of pore forming and vacuum drying. Target species for processing have been suggested. They are as follows: Azov goby (fillet for food products and Black Sea sprat for feeds. The recipes of the feed mixture for granulated floating food for trout have been developed. The results of the first series of the pilot research have been provided. The experiments have proved that preliminary pore forming immediately before vacuum drying makes possible to enlarge the surface area of moisture evaporation by 15…25 %. By processing photomicrographs of sections by means of a special software the authors have got the results demonstrating that when manufacturing dried products by pore forming and drying under pressure 10 kPa the pore take 35...38 % of the inner volume of the product and with drying under pressure 10 kPa – only 18...21 %, and when drying under the atmospheric pressure – 11...13 %.

Risks and factors influencing raw material availability and consequences for the development of future automotive power trains; Risiken und Faktoren der Rohstoffverfuegbarkeit und deren Folgen fuer die Entwicklung zukuenftiger Automobilantriebe

Energy Technology Data Exchange (ETDEWEB)

Gagliardi, David; Finken, Thomas [Ricardo Deutschland GmbH, Schwaebisch Gmuend (Germany)

2012-11-01

This paper aims to explore key risks and extraneous factors influencing raw material availability and related consequences for the realization of future automotive power trains. Important raw materials for the electro mobility are presented followed by an evaluation of their future supply risk. A review of the current situation and a summary of expectations for future technological developments are presented. The current situation of political factors, access to resources and other important factors are then discussed, highlighting some of the major risks and their influence on up-take rates of alternative power train technologies. Specifically the specific relationships between demand and supply side for specific rare earth elements and their effects on price development is investigated and suggests how these factors might influence existing relationships within the automotive industry. The paper concludes with suggestions for alternative strategies for specific groups within the automotive value chain to mitigate those risks. (orig.)

From basic raw material goods to cultural and environmental services: the Chinese bamboo sophistication path

Directory of Open Access Journals (Sweden)

Manuel Ruiz Pérez

2014-12-01

Full Text Available Bamboo has deep cultural and economic roots in China, the country with the largest bamboo resources in the world. Over the last three decades bamboo has evolved from a supply of raw material for basic goods into the material base of an increasingly diversified array of products and, more recently, into a potentially important source of cultural and environmental services. Based on a general literature review and the lessons learned from detailed case studies in different regions of China, we explored the changing roles of bamboo, and its effects on local economies and farmers' livelihood strategies. As the country develops and new economic activities continue to appear, bamboo production has shifted from a superior income-generating opportunity that largely benefited the better-off to a less attractive option left for those who have no other choice. The nature of the work has also changed, from families working directly on their bamboo plots to an emphasis on hired labor, with prosperous bamboo owners devoting most of their time to more lucrative activities. A similar process can be observed in bamboo processing in counties where previous industrial structures hinged around raw material harvests, but which have now entered into other secondary and tertiary industry activities. At the same time, bamboo has attracted new opportunities as a source of cultural, aesthetic, and leisure-related activities, as well as some potentially important climatic, watershed, and biodiversity functions. We analyze the complementarity between goods and services provided by bamboo and discuss some research issues and future trends that may help in overcoming these conflicts.

PRINCIPLES OF RE-ENGINEERING METHODOLOGY FOR TECHNOLOGICAL PROCESS IN PROCESSING OF RAW MATERIAL COMPONENTS WHILE PRODUCING CEMENT AND SILICATE PRODUCTS

Directory of Open Access Journals (Sweden)

I. A. Busel

2014-01-01

Full Text Available Grinding process is characterized by high energy consumption and low productivity. Nowadays efficiency of the ball mills applied for grinding is rather low. Only 3-6 % of the supplied power energy is used for material grinding. The rest part of the energy disappears in the form of heat, vibration and noise. So matter concerning reduction of energy consumption is of great importance.Improvement of efficiency and quality of technological process in grinding of raw material components while producing construction materials is considered as one of priority-oriented targets of power- and resource saving in construction industry with the purpose to reduce energy consumption for grinding. Grinding efficiency at operating enterprises is reasonable to improve by modernization of the equipment and existing technological, management and other processes which are related to grinding of mineral raw material. In order to reduce grinding power consumption it is necessary to carry out a complex re-engineering of technological process in grinding of various materials which is based on usage of new modifications of grinding bodies, physical and chemical grinding aids, modern information technologies and industrial automation equipment. Application of modern information technologies and industrial automation equipment makes it possible to execute the grinding process with maximum achievable productivity for existing capacity due to automatic control and consideration of continuous changes in technological parameters. In addition to this such approach gives an opportunity to control processes in real time by immediate adjustments of technological equipment operational modes.The paper considers an approach to the development of re-engineering methodology for technological process in grinding of raw material components while producing construction materials. The present state of technological grinding process is presented in the paper. The paper points out the

Biodiesel production using calcium manganese oxide as catalyst and different raw materials

International Nuclear Information System (INIS)

Dias, Joana Maia; Conceição Machado Alvim-Ferraz, Maria; Fonseca Almeida, Manuel; Méndez Díaz, José Diego; Sánchez Polo, Manuel; Rivera Utrilla, José

2013-01-01

Highlights: ► Biodiesel production using a calcium manganese oxide catalyst was studied. ► The active specie was Ca 0.9 Mn 0.1 O and its deactivation occurred by hydration. ► The studied catalyst presented lower activation temperature than CaO. ► Biodiesel production and quality using different raw materials is reported. ► Compared to the conventional process, biodiesel water content improved. - Abstract: The use of heterogeneous catalysts for biodiesel production aims to simplify the production process as well as to reduce purification costs and related environmental impacts. Calcium manganese oxide was recently identified by the authors as an interesting heterogeneous catalyst for biodiesel production from animal fat; however, the difference between this and other catalysts, the catalyst activation/deactivation mechanisms, its behaviour in the synthesis using different raw materials as well as the impacts of its use on product quality remained unclear. Therefore, the present work: (i) compared biodiesel production using calcium manganese oxide and other catalysts (CaO and NaOH); (ii) studied the reasons leading to activation/deactivation of the heterogeneous catalyst; (iii) analysed biodiesel heterogeneous synthesis using calcium manganese oxide and different raw materials (lard, waste frying oil and a mixture); and (iv) evaluated raw material and catalyst impact on the product quality. Considering the use of different catalysts, the results showed that, after 8 h of reaction, product purity was similar using the different catalysts, being 92.5 wt.% using both NaOH and calcium manganese oxide and 93.8 wt.% using CaO. The active species of the heterogeneous catalysts were CaO, in the case of calcinated calcium carbonate, and Ca 0.9 Mn 0.1 O, in the case of calcinated calcium manganese oxide. Because the deactivating species were different for both catalysts, the calcium manganese oxide required lower activation temperature, which should be an advantage

Auto component supply chain: a path to global India

OpenAIRE

Kale, Shailendra; Palacios Fernández, Miguel; Tafur Segura, José Javier; Jarad, Rajendra; Chitale, C.M.

2011-01-01

Supply chain management works to bring the supplier, the distributor, and the customer into one cohesive process. The Supply Chain Council defined supply chain as ‘Supply Chain: The flow and transformation of raw materials into products from suppliers through production and distribution facilities to the ultimate consumer., and then Sunil Chopra and Meindl, (2001) have define Supply chain management as ‘Supply Chain Management involves the flows between and among stages in a supply chain to m...

High-Temperature Release of SO2 from Calcined Cement Raw Materials

DEFF Research Database (Denmark)

Nielsen, Anders Rooma; Larsen, Morten B.; Glarborg, Peter

2011-01-01

During combustion of alternative fuels in the material inlet end of cement rotary kilns, local reducing conditions may occur and cause reductive decomposition of sulfates from calcined cement raw materials. Decomposition of sulfates is problematic because it increases the gas-phase SO2...... concentration, which may cause deposit formation in the kiln system. In this study, the release of sulfur from calcined cement raw materials under both oxidizing and reducing conditions is investigated. The investigations include thermodynamic equilibrium calculations in the temperature interval of 800–1500 °C...... and experiments in a tube furnace reactor in the temperature interval of 900–1100 °C. The investigated conditions resemble actual conditions in the material inlet end of cement rotary kilns. It was found that the sulfates CaSO4, K2SO4, and Na2SO4 were all stable under oxidizing conditions but began to decompose...

Globalization determinants of raw materials markets development

Directory of Open Access Journals (Sweden)

Olga Yatsenko

2013-02-01

Full Text Available The determinants of development of raw materials markets and the peculiarities of their formation in the terms of world economy globalization have been researched. The empirical base of research is the agricultural food market as one of the most important bases in the sphere of material production and provision of food security of the country. The important social and economic mission of the agricultural sector has been highlighted, along with the export competitiveness and import dependence of agricultural food products in the international trade. The imperative norms have been substantiated and conclusions have been drawn regarding the establishment of respective conditions for the operation of globally integrated markets in Ukraine.

Research and development programme of the EC in the field of raw materials 1982 to 1985

International Nuclear Information System (INIS)

Anon.

1982-01-01

Brussels: The EC Cabinet Council was presented a research and development programme in the field of raw materials for the years 1982 to 1985 which covers programmes already running and new actions as an overlapping raw material research programme of the EC. The new programme is divided up into 7 subprogrammes: I) metals and minerals (formerly: primary raw materials, II) uranium, III) ceramics, IV) wood as a renewable raw material, V) recycling of wastes (house and industry, VI) regaining of non-iron metals, VII) substitution. For the continuing of running actions and for beginning new projects in the 4 years plan, a total of 17 million ECU are to be allocated in the budget of the EC which will be used in cost sharing contracts or for coordinative projects. (orig./UA) [de

The use of foresight methods in strategic raw materials intelligence - an international review

Science.gov (United States)

Konrat Martins, Marco Antonio; Bodo, Balazs; Falck, Eberhard

2017-04-01

Foresight methods are systematic attempts to look into the longer term future of science, society, economy and technology. There is a range of tools and techniques that can be used individually or combined, most commonly classified into qualitative, quantitative or semi-quantitative methods, that follow an exploratory or normative approach. These tools can help to identify the longer term visions, orienting policy formulation and decisions, triggering actions, among other objectives. There is an identified lack of European strategic foresight knowledge in the raw materials domain. Since the European Raw Materials Initiative was launched in 2008, the EU has been attempting to overcome challenges related to the future access of non-energy and non-agricultural raw materials. In this context, the ongoing H2020 project, MICA (Mineral Intelligence Capacity Analysis, Grant Agreement No. 689648), has been launched to answer to stakeholders needs by consolidating relevant data, determining relevant methods and tools, and investigating Raw Materials Intelligence options for European mineral policy development, all tailored to fit under the umbrella of a European Raw Materials Intelligence Capacity Platform (EU-RMICP). As part of the MICA activities, an assessment of best practices and benchmarks of international raw materials foresight case studies has been carried out in order to review how EU and non-EU countries have employed foresight. A pool of 30 case studies has been collected and reviewed internationally, one third of which were selected for detailed assessment. These were classified according to their background and goals, in function of methods employed, and to the purpose of each method in the study: a total of 12 different methods were identified in these studies. For longer time frames, qualitative predictive methods such as Scenario Development have been repeatedly observed for mineral raw materials foresight studies. Substantial variations were observed in

SMART GROUND Project: SMART data collection and inteGRation platform to enhance availability and accessibility of data and infOrmation in the EU territory on SecoNDary Raw Materials

Science.gov (United States)

Rossetti, Piergiorgio; Antonella Dino, Giovanna; de la Feld, Marco; Pizza, Antonietta; Coulon, Frederic; Wagland, Stuart; Gomes, Diogo

2016-04-01

The issue of resource security has come to the forefront of the debate over recent years, partly due to considerable concern over the security of supply of the so called 'critical' materials, with rare earths attracting the greatest attention in the press. Their supply is fundamental to maintain and develop EU economy and its industries relied on a steady supply of Raw Materials. Thus considering the increasing scarcity and raising prices of both, energy raw materials and other raw materials, such as metals and minerals, the recycling and recovery of these materials from anthropogenic deposits such as landfills is of increasing relevance. Europe has somewhere between 150,000 and 500,000 landfill sites, with an estimated 90% of them being "non-sanitary" pre-dating the EU Landfill Directive of 1999. Thus historical background makes the numerous old waste dumps as possible sources of critical and secondary raw materials (SRM and CRM). However, to date there is no inventory available of SRM and CRM present in EU landfills, and best management practices to recover SRM from landfill activities are inefficient. In this context, the EU SMART GROUND (SG) project (Grant Agreement No 641988) intends to foster resource recovery in landfills by improving both the availability and the accessibility of data and information on SRM in the EU and creating synergies among the different stakeholders involved in the SRM value chain. To do so, the project aims to collect and integrate in a single EU databank (SMART GROUND Data Bank) all the data from existing databases and new information retrieved during project activities. Such data will be collected from the different waste streams including municipal, industrial and mining wastes across EU landfills. It will improve data gathering on SRM from different types of waste, by defining new and integrated data acquisition methods and standards. At last, but not least, the project will also improve the SRM economic and employment potential

Stochastic Modelling and Self Tuning Control of a Continuous Cement Raw Material Mixing System

Directory of Open Access Journals (Sweden)

Hannu T. Toivonen

1980-01-01

Full Text Available The control of a continuously operating system for cement raw material mixing is studied. The purpose of the mixing system is to maintain a constant composition of the cement raw meal for the kiln despite variations of the raw material compositions. Experimental knowledge of the process dynamics and the characteristics of the various disturbances is used for deriving a stochastic model of the system. The optimal control strategy is then obtained as a minimum variance strategy. The control problem is finally solved using a self-tuning minimum variance regulator, and results from a successful implementation of the regulator are given.

Approaches to raw sugar quality improvement as a route to sustaining a reliable supply of purified industrial sugar feedstocks

Science.gov (United States)

Energy costs in the sugar industry are outstripping costs of manufacture, particularly in refineries. This, as well as increasing transportation costs and the need to meet manufacturers’ tight specifications, has increased the demand for a sustainable supply of purified, raw sugar. Agricultural com...

Prospect of trema orientalis as a pulping raw material in bangladesh

International Nuclear Information System (INIS)

Jahan, M.S.

2013-01-01

The pulp and paper industry in Bangladesh is looking for new raw materials with high productivity per hectare. Currently, bamboo and Gmelina arborea are the main pulping raw materials for the pulp and paper industry of the country. Trema orientalis is one of the fastest growing woods in the tropical region. This paper reviews the literature on the topic, in particular, related to the chemical, morphological and physical properties of T. orientalis and its suitability for pulping. In addition, the advantages and disadvantages of various ulping processes proposed in the literature were critically analyzed. It was concluded that T. orientalis is a potential pulp wood for the Bangladesh pulp and paper industry. (author)

Processing biofuels from farm raw materials - A systems study; Pelletering och brikettering av jordbruksraavaror - En systemstudie

Energy Technology Data Exchange (ETDEWEB)

Nilsson, Daniel; Bernesson, Sven

2008-03-15

Use of processed biofuels (pellets, briquettes) has greatly increased in Sweden in recent decades, mainly to replace fossil fuels in large boilers, e.g. in coal powder boilers. More recently, the demand from private households and residential heating systems has also increased, mainly due to conversion from fossil heating oil. This increased interest in pellets and briquettes for heating is beginning to cause a shortage of the traditional raw materials, sawdust and wood shavings, and therefore attention is turning to using a variety of agricultural products as raw material. Such raw materials include cultivated energy crops and wastes and by-products from agriculture. This study describes the typical systems currently used for production of pellets and briquettes and investigates the possibility of using energy crops (Salix, reed canary-grass and hemp) and various wastes and by-products from processing of farm products (straw, cereal screenings, rape-seed meal and distiller's waste) as raw materials. Previous experiences of pelletizing and briquetting of these raw materials are reviewed in order to comprehensively identify possible combustion problems that may occur. On the basis of the results obtained, scenarios for possible production systems in a five-year perspective are presented and the costs and energy demands for these systems calculated. These future scenarios include large scale plants and micro-scale plants, as well as static and mobile equipment. The five main conclusions from the study are: - The farm raw materials of greatest interest for large-scale production are pelleted Salix and reed canary-grass. They have competitive prices and acceptable fuel properties and could be mixed with sawdust in existing large-scale pelletizing factories in Sweden. - Straw has low production costs but can cause serious ash-related problems. Hemp has too high production costs to be of commercial interest, while distiller's waste and rape-seed meal currently

Uranium Raw Material for the Nuclear Fuel Cycle: Exploration, Mining, Production, Supply and Demand, Economics and Environmental Issues (URAM-2009). Proceedings of an International Symposium

Energy Technology Data Exchange (ETDEWEB)

NONE

2014-05-15

This IAEA symposium is a third in a series which began in 2000 to discuss issues related to uranium raw materials. The symposia covered all areas of the uranium production cycle — including uranium geology, exploration, mining; milling and refining of uranium concentrates; and safety, environmental, social, training and regulatory issues — and reported on uranium supply and demand, and market scenarios. The first symposium was held in October 2000 — a time of extremely depressed market prices for uranium and of mines being closed — and primarily addressed environmental and safety issues in the uranium production cycle. By the time the second symposium was held in June 2005, the uranium market had started to improve after nearly two decades of depressed activity because of increased demand due to rising expectations for nuclear power expansion. Since then, there has been a dramatic rise in the uranium spot price, which in turn has promoted a significant increase in uranium exploration activities all over the world. The international symposium on Uranium Raw Material for the Nuclear Fuel Cycle (URAM-2009) was held at the IAEA, Vienna, 22–26 June 2009, at a time when nuclear energy was emerging as a viable alternative to meet the ever increasing demand of electricity in a sustainable manner, without degrading the environment. However, the global recession and credit crunch could impact the growth of the uranium industry. Since 2000, the identified uranium resource base has grown by more than 75%, exploration efforts have continued to increase in greenfield as well as brownfield sites, annual uranium production has risen, and the issue of social licensing and uranium stewardship has become increasingly important for public acceptance of the uranium industry. Some 210 delegates from 33 States and four international organizations participated in the symposium. In total, 120 technical papers were presented in the oral and poster sessions, and an exhibition on

Uranium Raw Material for the Nuclear Fuel Cycle: Exploration, Mining, Production, Supply and Demand, Economics and Environmental Issues (URAM-2009). Proceedings of an International Symposium

International Nuclear Information System (INIS)

2014-05-01

This IAEA symposium is a third in a series which began in 2000 to discuss issues related to uranium raw materials. The symposia covered all areas of the uranium production cycle — including uranium geology, exploration, mining; milling and refining of uranium concentrates; and safety, environmental, social, training and regulatory issues — and reported on uranium supply and demand, and market scenarios. The first symposium was held in October 2000 — a time of extremely depressed market prices for uranium and of mines being closed — and primarily addressed environmental and safety issues in the uranium production cycle. By the time the second symposium was held in June 2005, the uranium market had started to improve after nearly two decades of depressed activity because of increased demand due to rising expectations for nuclear power expansion. Since then, there has been a dramatic rise in the uranium spot price, which in turn has promoted a significant increase in uranium exploration activities all over the world. The international symposium on Uranium Raw Material for the Nuclear Fuel Cycle (URAM-2009) was held at the IAEA, Vienna, 22–26 June 2009, at a time when nuclear energy was emerging as a viable alternative to meet the ever increasing demand of electricity in a sustainable manner, without degrading the environment. However, the global recession and credit crunch could impact the growth of the uranium industry. Since 2000, the identified uranium resource base has grown by more than 75%, exploration efforts have continued to increase in greenfield as well as brownfield sites, annual uranium production has risen, and the issue of social licensing and uranium stewardship has become increasingly important for public acceptance of the uranium industry. Some 210 delegates from 33 States and four international organizations participated in the symposium. In total, 120 technical papers were presented in the oral and poster sessions, and an exhibition on

Uranium Raw Material for the Nuclear Fuel Cycle: Exploration, Mining, Production, Supply and Demand, Economics and Environmental Issues (URAM-2009). Proceedings of an International Symposium

International Nuclear Information System (INIS)

2014-06-01

This IAEA symposium is a third in a series which began in 2000 to discuss issues related to uranium raw materials. The symposia covered all areas of the uranium production cycle — including uranium geology, exploration, mining; milling and refining of uranium concentrates; and safety, environmental, social, training and regulatory issues — and reported on uranium supply and demand, and market scenarios. The first symposium was held in October 2000 — a time of extremely depressed market prices for uranium and of mines being closed — and primarily addressed environmental and safety issues in the uranium production cycle. By the time the second symposium was held in June 2005, the uranium market had started to improve after nearly two decades of depressed activity because of increased demand due to rising expectations for nuclear power expansion. Since then, there has been a dramatic rise in the uranium spot price, which in turn has promoted a significant increase in uranium exploration activities all over the world. The international symposium on Uranium Raw Material for the Nuclear Fuel Cycle (URAM-2009) was held at the IAEA, Vienna, 22–26 June 2009, at a time when nuclear energy was emerging as a viable alternative to meet the ever increasing demand of electricity in a sustainable manner, without degrading the environment. However, the global recession and credit crunch could impact the growth of the uranium industry. Since 2000, the identified uranium resource base has grown by more than 75%, exploration efforts have continued to increase in greenfield as well as brownfield sites, annual uranium production has risen, and the issue of social licensing and uranium stewardship has become increasingly important for public acceptance of the uranium industry. Some 210 delegates from 33 States and four international organizations participated in the symposium. In total, 120 technical papers were presented in the oral and poster sessions, and an exhibition on

Method of thermal reprocessing of hydrocarbon raw material

Energy Technology Data Exchange (ETDEWEB)

Feygin, Ye.A.; Bakhshiyan, Ts.A.; Barashkov, R.Ya.; Kazhdan, A.Z.; Raud, E.A.; Umanchik, N.P.

1979-09-30

In the method of thermal reprocessing of hydrocarbon raw material, to raise the efficiency of the process the heat exchange is done using a heat carrier in the form of a melt of metals or their salts, circulating in a closed system with a forced heating source in sequence through the pyrolysis zone, cooling zone, and heating zone. For example, the benzine fraction with initial boiling temperatures of 80-186 degrees C, together with steam, in the amount of 20% at 20 degrees C and pressure of 2 atmospheres, goes to the heating zone. Liquid Li goes there from the cooling zone through a closed circuit at 749 degrees C. The benzine, evaporated and heated to 300 degrees C, together with the melt, go to the pyrolysis zone, where the benzine is heated through the wall by the liquid Li coming from the heat carrier heating zone at 1000 degrees C. From the pyrolysis zone, the products, containing 41% C/sub 2/H/sub 4/, 15% C/sub 3/H/sub 6/ and 21% heavy fractions, go with the melt at 900 degrees C to the cooling zone, where they are cooled through the wall to 400 degrees C by the circulating liquid Li. The Li temperature at the entry into the cooling zone is 350 degrees C. The degree of raw material conversion is over 98%; the melt/raw material weight ratio is 0.2. Using this method enables a reduction in the pyrolysis zone from 80 to 8 m and the cooling zone area from 13 to 0.6 m/sup 2/ compared with the existing one, and transition from a multiple-tube cooling zone design to a tube one. The volume of the furnace unit is reduced from 500 to 10 m/sup 3/; the C/sub 2/H/sub 4/ yield is increased from 26-28 to 40-42%.

Renewable energies. Public lecture series at the Competence Centre for Renewable Raw Materials - selected papers; Erneuerbare Energien. Oeffentliche Vortragsreihe am Kompetenzzentrum fuer Nachwachsende Rohstoffe - ausgewaehlte Beispiele

Energy Technology Data Exchange (ETDEWEB)

Faulstich, Martin [Wissenschaftszentrum Straubing (Germany); Technische Univ. Muenchen (TUM) (Germany). Lehrstuhl fuer Rohstoff- und Energietechnologie; Menrad, Klaus (eds.) [Wissenschaftszentrum Straubing (Germany); Hochschule Weihenstephan-Triesdorf (Germany). Fachgebiet fuer Marketing und Management Nachwachsender Rohstoffe

2011-07-01

Within the second issue of the lecture series 'Renewable raw materials in research and practice', the Research Centre Straubing (Federal Republic of Germany) has selected the following contributions from the lecture course 'Renewable Energies': (a) Biofuels - today and tomorrow (E. Remmele); (b) Renewable raw materials from agricultural view (M. Schoelch); (c) Value creation in the agriculture by means of bio energy (R. Wagner); (d) Stirling engine for a coupled power and heat generation (A. Wagner); (e) International perspectives of utilizing biomass (A. Spangenberg); (f) Geothermal power - a clean and sustainable form of energy (R. Geigenfeind, S. Walker-Hertkorn); (g) Potentials of genetically variedenergy crops for enhancing the production of biomass (T. Dresselhaus, M. Gahrtz); (h) Use of solar energy - Technologies and trends (T. Schlegl); (i) Power generation from wind energy in Germany (P. Tzscheutschler, C. Heilek); (j) Energy supply at the turning point solar house against passive house (G. Dasch); (k) From the heel into the abyss: Heating with wood chips in the municipal nursery (J. Baer, J. Krug); (l) Competition for use between renewable raw materials and food (A. Heissenhuber, S. Rauh); (m) Studying in Straubing (M. Faulstich, K. Menrad, A. Multerer); (n) C.A.R.M.E.N. active (W. Doeller); (o) Thermal insulation for energy efficient buildings (H.-P. Ebert); (p) Energy efficiency by means of an intelligent recycle management and waste management (G. Wasmeier); (q) Energetic recovery from waste wear - power generation in the drainage system Straubing (C. Pop); (r) Conservation of electricity in households (G. Keller); (s) High-tech materials from the nature (B. Schmidt); (t) Millet, miscanthus and other as energy crops and raw material plants (M. Fritz); (u) Sustainable utilization of renewable raw materials - an economic view for a global demand (P. Zerle).

Prospects of rice straw as a raw material for paper making.

Science.gov (United States)

Kaur, Daljeet; Bhardwaj, Nishi Kant; Lohchab, Rajesh Kumar

2017-02-01

Pulp and paper mills are indispensable for any nation as far as the growth of the nation is concerned. Due to fast growth in population, urbanization and industrialization, the demand and consumption of paper has increased tremendously. These put high load on our natural resources and force the industry to look for alternative raw material. Rice straw is a lignocellulosic material abundantly available in wood short countries like China, India, Bangladesh, etc. and can be used as raw material for this industry. Open burning of rice straw releases noxious green house gases to the air and poses serious threats to global air chemistry and human health. So, it is a dual benefit option (for farmers and industries) to use rice straw as a raw material in pulp and paper industry. Organosolv pulping using acids are the prominent choices of researchers to convert this residue into valuable pulp but in developed countries only. Developing world favours the soda and soda-AQ processes as these are economical. As a virtue of less lignin content in comparison to wood, rice straw requires less harsh conditions for cooking and can be easily pulped. Bleaching is a crucial step of paper making but also responsible for causing water pollution. Many studies revealed that during the process more than 500 chlorinated compounds are released that are highly toxic, bioaccumulative and carcinogenic in nature. Most of the industries over the globe switch on to the elemental chlorine free short sequence bleaching methods using chlorine dioxide, hypochlorite and hydrogen peroxide. This paper presented the effective need of ecofriendly, economically reliable pulping and bleaching sequences in case of rice straw to eliminate the problems of chlorinated compounds in wastewater of paper mills. Such approach of using waste as a raw material with its environmentally safe processing for making paper can prove to be valuable towards sustainable growth. Copyright © 2016 Elsevier Ltd. All rights reserved.

Raw material monitoring assists companies. German Mineral Resources Agency at BGR provides information on global developments in resource markets

International Nuclear Information System (INIS)

2016-01-01

Germany is dependent on imports for its metalliferous natural resources. Although prices have been declining significantly in recent months, numerous raw materials such as platinum, cobalt and rare earth elements continue to be exposed to price and supply risks. To ensure that German industry can respond better to this situation in their procurement activities, the German Mineral Resources Agency (DERA) at BGR has developed a raw material monitoring system on behalf of the German government. DERA experts have con figured a screening method for the early identification of possible procurement risks. This is the platform which enables German companies to gain the specific advice they require. All of the most important information on this issue is bundled within DERA 's internet portal (www.deutsche-rohstoffagentur.de). BGR also provides its expertise in other important fields with great societal relevance. BGR has been advising the national commission on ''Storage of High-level Radioactive Waste'' since 2014. Due to their comprehensive research activities in the field of radioactive waste disposal, BGR scientists are important technical experts to which the commission can turn to for geological information and advice.

Rare earth elements exploitation, geopolitical implications and raw materials trading

Science.gov (United States)

Chemin, Marie-Charlotte

2015-04-01

, establishing a company in China can lower the production cost (since the company buys the products used in its production at a lower price). In the fifth session, they study the raw materials trading based on the futures contracts example. A producer, to avoid a rise in prices of raw materials used in his production can use derivative products on the financial market: futures contracts for instance. This product ensures a quantity and quality for a price and a delivery date agreed upon today. Actually, producers can use a method called Fix price hedging in order to fix the price of a specific product. The main idea is to balance out the "physical position" (spot market) and the "paper position" (futures market). Even if the REE are commercialized in form of a non-perishable's oxide, the flow of the stock must be guaranteed and this is why it is important for producers to secure their supply of raw materials. In the last session, students search local companies that use REE in their production process and study their strategy on the market.

Use of alternative raw materials for yoghurt production | Farinde ...

African Journals Online (AJOL)

Soymilk and maize steep water were used as alternative raw materials to cow milk and commercial starter, respectively, for production of yoghurt. The cow milk used was both Fresh milk and dried powdered milk (DANO). The cost of production of the yoghurt samples as well as their chemical, microbial and organoleptic ...

A Review of Supply Chain Management using Multi-Agent System

OpenAIRE

Vivek Kumar; S Srinivasan

2010-01-01

Supply chain consist of various components/ identities like supplier, manufacturer, factories, warehouses, distributions agents etc. These identities are involved for supplying raw materials, components which reassembles in factory to produce a finished product. With the increasing importance of computerbased communication technologies, communication networks are becoming crucial in supply chain management. Given the objectives of the supply chain: to have the right products in the right quan...

SUSTAINABILITY OF SHORT FOOD SUPPLY CHAINS: ANALYSIS OF RAW MATERIAL SUPPLY IN MILAN PUBLIC SCHOOL CATERING

Directory of Open Access Journals (Sweden)

G. D’Anna

2009-09-01

Full Text Available The demand of short food supply chains is becoming more pressing by consumers, especially in the largest school catering. The implementation of the short chain in a large catering company of Milan, is described in this practical contribution. Several aspects of short food chains sustainability: legal, commercial and economic sustainability, hygienic and gastronomic sustainability, are discussed.

Evaluating the Security of the Global Containerized Supply Chain

National Research Council Canada - National Science Library

Willis, Henry H; Ortiz, David S

2004-01-01

The global supply chain is the network of suppliers, manufacturing centers, warehouses, distribution centers, and retail outlets that transforms raw materials into finished products and delivers them to consumers...

Radioactivity and associated radiation hazards in ceramic raw materials and end products.

Science.gov (United States)

Viruthagiri, G; Rajamannan, B; Suresh Jawahar, K

2013-12-01

Studies have been planned to obtain activity and associated radiation hazards in ceramic raw materials (quartz, feldspar, clay, zircon, kaolin, grog, alumina bauxite, baddeleyite, masse, dolomite and red mud) and end products (ceramic brick, glazed ceramic wall and floor tiles) as the activity concentrations of uranium, thorium and potassium vary from material to material. The primordial radionuclides in ceramic raw materials and end products are one of the sources of radiation hazard in dwellings made of these materials. By the determination of the activity level in these materials, the indoor radiological hazard to human health can be assessed. This is an important precautionary measure whenever the dose rate is found to be above the recommended limits. The aim of this work was to measure the activity concentration of (226)Ra, (232)Th and (40)K in ceramic raw materials and end products. The activity of these materials has been measured using a gamma-ray spectrometry, which contains an NaI(Tl) detector connected to multichannel analyser (MCA). Radium equivalent activity, alpha-gamma indices and radiation hazard indices associated with the natural radionuclides are calculated to assess the radiological aspects of the use of the ceramic end products as decorative or covering materials in construction sector. Results obtained were examined in the light of the relevant international legislation and guidance and compared with the results of similar studies reported in different countries. The results suggest that the use of ceramic end product samples examined in the construction of dwellings, workplace and industrial buildings is unlikely to give rise to any significant radiation exposure to the occupants.

Radioactivity and associated radiation hazards in ceramic raw materials and end products

International Nuclear Information System (INIS)

Viruthagiri, G.; Rajamannan, B.; Suresh Jawahar, K.

2013-01-01

Studies have been planned to obtain activity and associated radiation hazards in ceramic raw materials (quartz, feldspar, clay, zircon, kaolin, grog, alumina bauxite, baddeleyite, masse, dolomite and red mud) and end products (ceramic brick, glazed ceramic wall and floor tiles) as the activity concentrations of uranium, thorium and potassium vary from material to material. The primordial radionuclides in ceramic raw materials and end products are one of the sources of radiation hazard in dwellings made of these materials. By the determination of the activity level in these materials, the indoor radiological hazard to human health can be assessed. This is an important precautionary measure whenever the dose rate is found to be above the recommended limits. The aim of this work was to measure the activity concentration of 226 Ra, 232 Th and 40 K in ceramic raw materials and end products. The activity of these materials has been measured using a gamma-ray spectrometry, which contains an NaI(Tl) detector connected to multichannel analyser (MCA). Radium equivalent activity, alpha-gamma indices and radiation hazard indices associated with the natural radionuclides are calculated to assess the radiological aspects of the use of the ceramic end products as decorative or covering materials in construction sector. Results obtained were examined in the light of the relevant international legislation and guidance and compared with the results of similar studies reported in different countries. The results suggest that the use of ceramic end product samples examined in the construction of dwellings, workplace and industrial buildings is unlikely to give rise to any significant radiation exposure to the occupants. (authors)

2.4. The kinetics of hydrochloric-acid decomposition of calcined concentrate of boron raw material of Ak-Arkhar Deposit

International Nuclear Information System (INIS)

Mirsaidov, U.M.; Kurbonov, A.S.; Mamatov, E.D.

2015-01-01

Present article is devoted to kinetics of hydrochloric-acid decomposition of calcined concentrate of boron raw material of Ak-Arkhar Deposit. The experimental data of dependence of hydrochloric-acid decomposition of calcined boron raw material for boron oxide extraction on temperature (20-80 deg C) and process duration (15-60 min) were considered. It was defined that at temperature increasing the boron oxide extraction from borosilicate raw material increases from 24.1 till 86.8%. The constants of decomposition rate of boron raw material were calculated.

Review of scientific Research results in identification of plant raw materials in food products

OpenAIRE

GOLUBTSOVA YU. V.

2016-01-01

Currently, the science-based capabilities have been generated to develop and test various identification methods of food products and reveal adulteration using advanced technique and processes. This article reviews researches and developments to identify the plant raw materials in food products based on morphological, anatomic, physical and chemical test methods and the latest DNA-technologies. Review of physical, chemical, anatomic and morphological test methods to identify raw materials bot...

Prospects for development of hydrocarbon raw materials resources reproduction

Science.gov (United States)

Vertakova, Y. V.; Babich, T. N.; Polozhentseva, Y. S.; Zvyagintsev, G. L.

2017-10-01

The article presents data on the influence of factors in the field of innovative technology of thermocatalytic depolymerization of solid household wastes (SHW) on the efficiency and prospects for the development of technogenic hydrocarbon raw materials resource reproduction. Process thermodynamics, reactions kinetics, the mechanism of thermolysis of secondary polymers in organic solvents have been studied by means of laboratory experiments. It is shown that different morphological groups of wastes dissolve practically at the same rate at temperatures of 250-310°C. A homogeneous product is formed in the liquid phase; the spread of values for the elements lies in the interval of 1.5-4.5 %; technological requirements of the stages of formation of boiler fuels are satisfied. Using the principles of patent analysis, new techniques of processing household waste components are proposed. The basics of energy-efficient and energy-saving processes of technogenic hydrocarbon raw materials resource reproduction have been laid. The possibility of increasing the production payback and intensification is shown. Ecological and demographic safety for population and technical and economic benefits from SHW processing are achieved.

Mechanochemical modification of the composition and structure of plant raw materials to control the combustion of alternative fuel

Directory of Open Access Journals (Sweden)

Bychkov Aleksey

2017-01-01

Full Text Available The possibilities of mechanochemistry in processing of renewable lignocellulose raw material into solid kinds of biofuel are demonstrated in this work. A review of lignocellulose raw materials promising for our country is presented. These raw materials include wastes from agriculture and forestry, and the biomass of rapidly growing plants. The physicochemical properties of lignocellulose materials with different delignification degrees were modeled with the help of the artificial mixtures of plant raw material with purified cellulose and lignin. The data illustrating the effect of disperse state and lignin content on the reactivity of the material in subsequent combustion are presented. The tests at the combustion bench with the thermal power up to 5 MW allowed determining the optimal combustion parameters for the obtained biofuel in the autothermal mode.

Energies and raw materials. Letter n.28

International Nuclear Information System (INIS)

2007-01-01

This letter of the DGEMP (General Direction of the Energy and the Raw Materials) deals with the following four main topics: the main recommendations of the final report of the working Group ''Factor 4'' concerning the energy policy; the energy conservation certificates as a tool of the energy control with their implication in the residential and ternary sector; the increase of the solar water heaters and heat pumps sales thanks to the tax credits; the California example facing the climatic change and the energy policy. (A.L.B.)

Cellulosic pulps of cereal straws as raw material for the manufacture of ecological packaging

OpenAIRE

Vargas González, Fátima; González, Zoilo; Sánchez, Rafael; Jiménez, Luis; Rodríguez Pascual, Alejandro

2012-01-01

The aim of this work was to study the potential application of four types of cereal straws: oats, maize, rapeseed, and barley, in order to obtain cellulose pulp through the Specel® process for use in the manufacture of 100% biodegradable and ecological packaging. Raw materials were chemically characterized to determine alcohol-extractives, ash, lignin, holocellulose, and α-cellulose. Cellulosic pulps obtained from raw materials were characterized to determine yield, Kappa number, and viscosit...

Thermal Energetic Reactor with High Reproduction of Fission Materials

International Nuclear Information System (INIS)

Kotov, V.M.

2012-01-01

Existing thermal reactors are energy production scale limited because of low portion of raw uranium usage. Fast reactors are limited by reprocessing need of huge mass of raw uranium at the initial stage of development. The possibility of development of thermal reactors with high fission materials reproduction, which solves the problem, is discussed here. Neutron losses are decreased, uranium-thorium fuel with artificial fission materials equilibrium regime is used, additional in-core and out-core neutron sources are used for supplying of high fission materials reproduction. Liquid salt reactors can use dynamic loading regime for this purpose. Preferable construction is channel type reactor with heavy water moderator. Good materials for fuel element shells and channel walls are zirconium alloys enriched by 90Zr. Water cooled reactors with usage 12% of raw uranium and liquid metal cooled reactors with usage 25% of raw uranium are discussed. Reactors with additional neutron sources obtain full usage of raw uranium with small additional energy expenses. On the base of thermal reactors with high fission materials reproduction world atomic power engineering development supplying higher power and requiring smaller speed of raw uranium mining, than in the variant with fast reactors, is possible.

Analysis of Mechanical Properties of Fabrics of Different Raw Material

Directory of Open Access Journals (Sweden)

Aušra ADOMAITIENĖ

2011-07-01

Full Text Available The study analyzes dependence of mechanical properties (breaking force, elongation at break, static friction force and static friction coefficient on integrated fabric structure factor j and raw material density r, among the fabrics of different raw material (cotton, wool, polypropylene, polyester and polyacrylnitrile and woven in different conditions. The received results demonstrate that sometimes strong dependences exist (wool, polypropylene and polyacrylnitrile, whereas in some cases (cotton and polyester there is no correlation. It was also discovered that the breaking force and elongation at break in the direction of weft increase, when fabric structure becomes more rigid. In the meantime variations of the curves in the direction of warp are insignificant. Regarding static friction force and static friction coefficient (found in two cases, when fabrics were rubbing against leather and materials, it was discovered that consistency of the curves is irregular, i. e. they either increase or decrease, when integrated fabric structure factor j growth. It was also identified that some dependences are not strong and relationship between explored and analyzed factors does not exist. Variation of all these mechanical properties with respect to material density r enables to conclude that increase of material density r results in poor dependences or they are whatsoever non-existent.http://dx.doi.org/10.5755/j01.ms.17.2.487

23 CFR 140.908 - Materials and supplies.

Science.gov (United States)

2010-04-01

... Reimbursement for Railroad Work § 140.908 Materials and supplies. (a) Procurement. Materials and supplies, if... job, less a consideration for loss in service life at 10 percent for rails, angle bars, tie plates and... measures for restoration of affected areas as required by the physical construction or by reason of safety...

An integrated production-inventory model for food products adopting a general raw material procurement policy

Science.gov (United States)

Fauza, G.; Prasetyo, H.; Amanto, B. S.

2018-05-01

Studies on an integrated production-inventory model for deteriorating items have been done extensively. Most of the studies define deterioration as physical depletion of some inventories over time. This definition may not represent the deterioration characteristics of food products. The quality of food production decreases over time while the quantity remains the same. Further, in the existing models, the raw material is replenished several times (or at least once) within one production cycle. In food industries, however, a food company, for several reasons (e.g., the seasonal raw materials, discounted price, etc.) sometimes will get more benefit if it orders raw materials in a large quantity. Considering this fact, this research, therefore, is aimed at developing a more representative inventory model by (i) considering the quality losses in food and (ii) adopting a general raw material procurement policy. A mathematical model is established to represent the proposed policy in which the total profit of the system is the objective function. To evaluate the performance of the model, a numerical test was conducted. The numerical test indicates that the developed model has better performance, i.e., the total profit is 2.3% higher compared to the existing model.

Irradiation as an alternative environment friendly method for microbiological decontamination of herbal raw material

International Nuclear Information System (INIS)

Gorecki, P.; Kedzia, B.; Migdal, W.; Owczarczyk, H.B.

1998-01-01

Microbiological contamination of herbal raw materials is a serious problem in the production of therapeutical preparations. A good quality of the product, according to the pharmaceutical requirements may be achieved by applying suitable methods of decontamination. The decontamination treatments should be fast and effective against all microorganisms. It should ensure the decontamination of both packaging and the product in order to act effectively against all the microorganisms present and must not reduce the sensory and technological qualities of the commodities. In the paper, the results of comparative investigations on the microbiological decontamination of herbal raw materials by chemical (ethylene oxide, methyl bromide) and physical method (irradiation) are presented. Decontamination of herbal raw materials by irradiation is a method by choice. It is because chemical methods have been recognized recently as not safe to the consumer. Irradiation, in turn, is technically feasible, very effective and friendly enough to environment process

Occupational radiation protection in the mining and processing of raw materials

International Nuclear Information System (INIS)

2004-01-01

The mining and processing of uranium ore, thorium ore and other raw materials containing natural radionuclides are carried out in a number of Member States. There is a clear need to update the guidance on the radiation protection of the workers involved, and this Safety Guide provides such updated guidance. Material from two previous publications has been adapted for inclusion in this Safety Guide. These previous publications - Radiation Monitoring in the Mining and Milling of Radioactive Ores (Safety Series No. 95) and Radiation Protection of Workers in the Mining and Milling of Radioactive Ores (Safety Series No. 26, hereby superseded) - dealt principally with activities involving uranium ore and thorium ore. Activity concentrations of naturally occurring radionuclides are elevated in other mineral deposits such as heavy mineral sands and phosphate rock. Furthermore, high radon levels may be found in mines, irrespective of the activity concentrations of natural radionuclides in the raw material being extracted. In recognition of these circumstances, this Safety Guide is intended to apply also to the mining and processing of any raw material for which radiation protection measures need to be considered. The IAEA Safety Fundamentals publication on Radiation Protection and the Safety of Radiation Sources presents the principles, concepts and objectives of protection and safety. Safety requirements based on the objectives and principles specified in these Safety Fundamentals, including requirements for the protection of workers exposed to ionizing radiation, are established in the International Basic Safety Standards for Protection against Ionizing Radiation and for the Safety of Radiation Sources (the Basic Safety Standards or Bss). These requirements also reflect the recommendations of the International Commission on Radiological Protection (ICRP). Safety Guides provide recommendations on the basis of international experience on the fulfilment of the requirements

New technologies and raw materials for iron and steel making

Energy Technology Data Exchange (ETDEWEB)

Holappa, L. [Helsinki Univ. of Technology, Otaniemi (Finland). Lab. of Metallurgy

1998-07-01

The current steelmaking is still mainly based on two alternatives routes. The first one is ore based production route via reduction in blast furnaces (BF) to produce carbon-rich hot metal which is then oxidised in basic oxygen converter process (BOF) to crude steel, then refined and alloyed in several secondary (ladle) metallurgical operations to its final composition, further followed by continuous casting and rolling operations. The second main steelmaking route starts from steel scrap as the main raw material, melting of scrap in electric furnaces to crude steel, the subsequent stages being corresponding to those in ore based steelmaking. Both these processes represent well-established and highly developed technologies. However, they have some drawbacks. Blast furnace process needs sinter or pellets and coke as its raw materials. That means erection of large integrates with high investment costs in the production units themselves as well as to avoid severe environmental issues. Scrap-based steelmaking is ideal from the viewpoint of recycling, but it is limited by the scrap availability and quality problems encountered by the noticeable metallic impurities in purchase scrap. Direct reduction of iron ore in solid state to produce direct reduced iron (DRI) has its roots in the early ironmaking history but was firstly commercialised on a modern concept at the end of the 1960's when the first Midrex installation was run into operation. Most of the DR-processes utilise natural gas as the reducing agent but also some processes utilising coal have been introduced and are used in industrial scale. The oil crises in the 1970's slowed down the progress of DRI production but during the last 15 years the production has steadily grown being nowadays about 35 Mton/year. That corresponds to roughly 10 pct of the total solid material input into the world steel production. No doubt, the growth will continue in the near future as well. Quite recently, a new process

Analysis of waste coal from the enterprises of Kemerovo region as raw materials for production of ceramic materials

Science.gov (United States)

Stolboushkin, A. Yu; Akst, D. V.; Fomina, O. A.; Ivanov, A. I.; Syromyasov, V. A.

2017-09-01

The analysis of waste coal from mining enterprises of Kemerovo region as raw materials for production of building ceramics is given. The results of studies of material, chemical and mineralogical compositions of waste coal from Abashevskaya processing plant (Novokuznetsk) are presented. It was established that the chemical composition of waste coal refers to aluminosilicate raw materials with a high content of alumina and coloring oxides, the residual carbon content in the wastes is 12-25 %. According to the granulometric composition the waste coal is basically a sandy-dusty fraction with a small amount of clay particles (1-3 %). Additional grinding of coal waste and the introduction of a clay additive in an amount of up to 30 % are recommended. The results of the study of the mineral composition of waste coal are presented. Clay minerals are represented in the descending order by hydromuscovite, montmorillonite and kaolinite, minerals-impurities consist of quartz, feldspar fine-dispersed carbonates. The results of the investigation of ceramic-technological properties of waste coal, which belong to the group of moderately plastic low-melting raw materials, are given. As a result of a comprehensive study it was been established that with chemical, granulometric and mineralogical compositions waste coal with the reduced residual carbon can be used in the production of ceramic bricks.

The properties of weft knitted fabric medical and preventive treatment action using eco-raw materials

Science.gov (United States)

Halavska, L.; Batrak, O.

2016-07-01

A new trend in the world is the clothing production using the new types of ecological raw materials application - milk, pineapple, coconut, hemp, banana, eucalyptus, clams, corn, bamboo, soya, nettle yarn. This makes it possible to create textile materials of new generation with unique antibacterial and antiseptic properties. Such materials have a positive preventive and sometimes therapeutic effect on people, and their health. Eco-raw materials clothing is able to protect the human body from the environment harmful effects: cold, heat, rain, dust, opportunely remove from underclothing layer the steam and gases, sweat; maintain in underclothing layer the necessary microclimate for normal organism functioning. Study of knitwear consumer properties, produced with eco-materials, is an urgent task of the world vector, directed on ecological environmental protection. This paper presents the research results of hygroscopicity and capillarity weft knitted fabrics, what knitted from different types of eco-raw materials: bamboo yarn, yarn containing soybean and nettle yarn. Character of influence of the liquid raising level changes depending on the experiment time and the knitting structure is revealed.

Raw materials for pellets; Rohstoffe fuer Pellets

Energy Technology Data Exchange (ETDEWEB)

Neumann, H.

2008-01-15

In order to keep the pellet prices stable, producers look for new raw materials. Sawdust as a former basis also competes with the manufacturers of chip boards and paper. Three classes of quality are discussed by the pellet manufacturers: (a) the DINplus pellet as a premium segment for which high-quality sawdust are used; (b) a wood pellet from natural wood with varying quality for the utilization in larger plants with filters; (c) the inexpensive industrial wood pellet which deviates from the DINplus commodity regarding to the ingredients and form and could be fired in larger power stations.

Enhancement of efficiency of storage and processing of food raw materials using radiation technologies

Energy Technology Data Exchange (ETDEWEB)

Gracheva, A. Yu.; Zav’yalov, M. A.; Ilyukhina, N. V.; Kukhto, V. A.; Tarasyuk, V. T.; Filippovich, V. P. [All-Russia Research Institute of Preservation Technology (Russian Federation); Egorkin, A. V.; Chasovskikh, A. V. [Research Institute of Technical Physics and Automation (Russian Federation); Pavlov, Yu. S., E-mail: rad05@bk.ru [Frumkin Institute of Physical Chemistry and Electrochemistry, Russian Academy of Sciences (Russian Federation); Prokopenko, A. V., E-mail: pav14@mail.ru [National Research Nuclear University (Moscow Engineering Physics Institute) (Russian Federation); Strokova, N. E. [Moscow State University (Russian Federation); Artem’ev, S. A. [Russian Research Institute of Baking Industry (Russian Federation); Polyakova, S. P. [Russian Research Institute of Confectionery Industry (Russian Federation)

2016-12-15

The work is dedicated to improvement of efficiency of storage and processing of food raw materials using radiation technologies. International practice of radiation processing of food raw materials is presented and an increase in the consumption of irradiated food products is shown. The prospects of using radiation technologies for the processing of food products in Russia are discussed. The results of studies of radiation effects on various food products and packaging film by γ radiation and accelerated electrons are presented.

Enhancement of efficiency of storage and processing of food raw materials using radiation technologies

International Nuclear Information System (INIS)

Gracheva, A. Yu.; Zav’yalov, M. A.; Ilyukhina, N. V.; Kukhto, V. A.; Tarasyuk, V. T.; Filippovich, V. P.; Egorkin, A. V.; Chasovskikh, A. V.; Pavlov, Yu. S.; Prokopenko, A. V.; Strokova, N. E.; Artem’ev, S. A.; Polyakova, S. P.

2016-01-01

The work is dedicated to improvement of efficiency of storage and processing of food raw materials using radiation technologies. International practice of radiation processing of food raw materials is presented and an increase in the consumption of irradiated food products is shown. The prospects of using radiation technologies for the processing of food products in Russia are discussed. The results of studies of radiation effects on various food products and packaging film by γ radiation and accelerated electrons are presented.

Asia's hunger for energy. Raw materials exploitation taken to the limit; Asiens Energiehunger. Rohstoffe am Limit

Energy Technology Data Exchange (ETDEWEB)

Pilny, Karl; Reid, Gerard

2011-07-01

The world is facing a dramatic change, owing to the rapid economic growth of China and India, which is unique in history. The result will be an enraged battle for limited fossil fuels like oil and gas. To secure energy resources, the current and future powers will increasingly use power play and also armed solutions. This is why we need profound changes, not only in the manner of power generation but also in the distribution and uses of the generated power. The book intends to give the reader profound understanding of the role of raw materials in future energy supply and of the options we have to solve the energy problem. (orig./RHM)

Mining of Radioactive Raw Materials as an Origin of the Nuclear Fuel Chain

Directory of Open Access Journals (Sweden)

Bedřich Michálek

2007-01-01

Full Text Available The mining of radioactive raw materials may be considered as an origin of the nuclear fuel chain and thus determines the amount of radioactive wastes which have to be stored safety in the final stage of the fuel chain. The paper informs about the existing trends in mining of radioactive raw materials in the world, provides an overview of development in mining in the Czech Republic and of possibilities of future exploiting some uranium deposits. It points a possibility of non-traditional obtaining uranium from mine waters from underground uranium mines closed and flooded earlier.

Radiation decontamination (hygienisation) of cosmetic raw materials and products

International Nuclear Information System (INIS)

Malec-Czechowska, K.; Migdal, W.; Owczarczyk, H.B.

1998-01-01

Microbiological purity of cosmetics is a problem of today because of growing hygienic requirements to these products. The demand for high hygienic purity from one side and the limitation in the use of conservants to cosmetics from the other side stimulate the research activity, the aim of which is to satisfy present requirements in this field. The application of radiation decontamination (hygienisation) seems to be one of solutions. In present report were present the results of the study on the effect of electron beam irradiation on microbial contamination of selected cosmetics and some raw materials used in cosmetic industry. Radiation doses applied were not higher than 6.0 kGy. The level of microbial contamination in both unirradiated and irradiated samples was determined by applying the standard microbiological methods. In addition, the quality and usefulness of irradiated cosmetics were examined by methods used in cosmetic industry. The results obtained show conclusively that radiation treatment can be successfully used for the decontamination (hygienisation) of cosmetics and some raw materials used in their production, without changing the quality and the usefulness of the product released. (author)

Transparency in complex dynamic food supply chains

NARCIS (Netherlands)

Trienekens, J.H.; Wognum, P.M.; Beulens, A.J.M.; Vorst, van der J.G.A.J.

2012-01-01

Food supply chains are increasingly complex and dynamic due to (i) increasing product proliferation to serve ever diversifying and globalising markets as a form of mass customisation with resulting global flows of raw materials, ingredients and products, and (ii) the need to satisfy changing and

International Trade Drives Global Resource Use: A Structural Decomposition Analysis of Raw Material Consumption from 1990-2010.

Science.gov (United States)

Plank, Barbara; Eisenmenger, Nina; Schaffartzik, Anke; Wiedenhofer, Dominik

2018-04-03

Globalization led to an immense increase of international trade and the emergence of complex global value chains. At the same time, global resource use and pressures on the environment are increasing steadily. With these two processes in parallel, the question arises whether trade contributes positively to resource efficiency, or to the contrary is further driving resource use? In this article, the socioeconomic driving forces of increasing global raw material consumption (RMC) are investigated to assess the role of changing trade relations, extended supply chains and increasing consumption. We apply a structural decomposition analysis of changes in RMC from 1990 to 2010, utilizing the Eora multi-regional input-output (MRIO) model. We find that changes in international trade patterns significantly contributed to an increase of global RMC. Wealthy developed countries play a major role in driving global RMC growth through changes in their trade structures, as they shifted production processes increasingly to less material-efficient input suppliers. Even the dramatic increase in material consumption in the emerging economies has not diminished the role of industrialized countries as drivers of global RMC growth.

UNCERTAINTY SUPPLY CHAIN MODEL AND TRANSPORT IN ITS DEPLOYMENTS

Directory of Open Access Journals (Sweden)

Fabiana Lucena Oliveira

2014-05-01

Full Text Available This article discusses the Model Uncertainty of Supply Chain, and proposes a matrix with their transportation modes best suited to their chains. From the detailed analysis of the matrix of uncertainty, it is suggested transportation modes best suited to the management of these chains, so that transport is the most appropriate optimization of the gains previously proposed by the original model, particularly when supply chains are distant from suppliers of raw materials and / or supplies.Here we analyze in detail Agile Supply Chains, which is a result of Uncertainty Supply Chain Model, with special attention to Manaus Industrial Center. This research was done at Manaus Industrial Pole, which is a model of industrial agglomerations, based in Manaus, State of Amazonas (Brazil, which contemplates different supply chains and strategies sharing same infrastructure of transport, handling and storage and clearance process and uses inbound for suppliers of raw material.  The state of art contemplates supply chain management, uncertainty supply chain model, agile supply chains, Manaus Industrial Center (MIC and Brazilian legislation, as a business case, and presents concepts and features, of each one. The main goal is to present and discuss how transport is able to support Uncertainty Supply Chain Model, in order to complete management model. The results obtained confirms the hypothesis of integrated logistics processes are able to guarantee attractivity for industrial agglomerations, and open discussions when the suppliers are far from the manufacturer center, in a logistics management.

ASSESSMENT AND DESIGN FOR SUSTAINABLE GREEN SUPPLY CHAIN MANAGEMENT

OpenAIRE

Mangal Singh Sisodiya

2017-01-01

Green Supply Chain Management (GSCM) is one of the recent innovations for the enhancement of capabilities of Supply Chain Management. In this paper, we aim to study the various activities of the Supply Chain processes of the various Indian Manufacturing Industries i.e. both Small & Large Scale Industries and finds how much eco-friendly they are (i.e. how much % of the green factor are involved in their supply chain activities from the procurement of the raw material to the transportation of t...

Characterization of raw materials to obtain the mass for white ware, using waste glass

International Nuclear Information System (INIS)

Cavalcanti, M.S.L.; Porto, V.S.; Meneses, R.L; Albuquerque, A.V.; Guedes, B.F.R.; Morais, C.R.S.; Santana, L.N.L.

2009-01-01

A major problem faced in the post modern society is the huge amount of glass, accumulated in landfills cities. The glass material is one hundred percent recyclable and has the property to act as fluxes as well as feldspar. Given this premise, this study aimed to characterize materials - raw materials and waste glass regional plan for development of ceramic bodies with the similar behavior produced industrially, using shards of glass to partially replace the feldspar. The materials - raw materials used were clay, ball clay, kaolin, quartz, feldspar and shard of glass, being characterized by the techniques: chemical analysis, size analysis, differential thermal analysis vibrational spectroscopy in the infrared region, the Ray-Diffraction X and scanning electron microscopy. The results showed that the waste had higher rates of vitreous oxides fluxes and similar. (author)

Raw material variability as archaeological tools: Preliminary results from a geochemical study of the basalt vessel workshop at Iron Age Tel Hazor, Israel

Directory of Open Access Journals (Sweden)

Tatjana Gluhak

2016-10-01

Full Text Available The discovery of a basalt vessel workshop at Tel Hazor, one of the most important Iron Age sites in the Near East, marks a turning point in our understanding of stone artifact production and distribution during the1st millennium BCE. It offers a rare opportunity to characterize ancient raw material sources, production sites, and study production, trade and distribution systems. The basalt vessel workshop, the only one of its kind in the Levant, produced large quantities of bowl preforms and production waste. To better understand the production and distribution systems behind this specialized production center, in 2011 we initiated a focused geochemical project that concentrated on the products of this unique workshop.  We measured the major and trace element composition of 44 unfinished basalt vessels from the workshop and other contexts at Hazor, and can demonstrate that the majority of these objects were derived from one specific, geochemically well-constrained, basaltic rock source. Only a few bowls clearly deviate from this geochemical composition and were produced using raw material from other sources. Thus, we believe that one major quarry existed that supplied the Hazor workshop with the majority of the basaltic raw material. The products from this specific extraction site provide us with a “Hazor reference group” that can be used to test whether or not finished vessels from Hazor and contemporary sites were produced in the Hazor workshop.

Quality assessment of baby food made of different pre-processed organic raw materials under industrial processing conditions.

Science.gov (United States)

Seidel, Kathrin; Kahl, Johannes; Paoletti, Flavio; Birlouez, Ines; Busscher, Nicolaas; Kretzschmar, Ursula; Särkkä-Tirkkonen, Marjo; Seljåsen, Randi; Sinesio, Fiorella; Torp, Torfinn; Baiamonte, Irene

2015-02-01

The market for processed food is rapidly growing. The industry needs methods for "processing with care" leading to high quality products in order to meet consumers' expectations. Processing influences the quality of the finished product through various factors. In carrot baby food, these are the raw material, the pre-processing and storage treatments as well as the processing conditions. In this study, a quality assessment was performed on baby food made from different pre-processed raw materials. The experiments were carried out under industrial conditions using fresh, frozen and stored organic carrots as raw material. Statistically significant differences were found for sensory attributes among the three autoclaved puree samples (e.g. overall odour F = 90.72, p processed from frozen carrots show increased moisture content and decrease of several chemical constituents. Biocrystallization identified changes between replications of the cooking. Pre-treatment of raw material has a significant influence on the final quality of the baby food.

Comparison of Biochars Characteristics from Different Raw Materials

Directory of Open Access Journals (Sweden)

SUN Tao

2017-10-01

Full Text Available Biochar is the carbon-rich product from biomass under limited supply of oxygen. Biochar has been well recognized in enhancing terrestrial carbon sequestration and greenhouse gas mitigation as well as in improving soil fertility and plant productivity. To explore the differences of biochars produced from different raw materials, six biochar samples made from alfalfa straw, wheat straw, cotton straw, grape vines, sludge and lignite were selected as test material. Qualitative and quantitative analysis by fourier transform infrared spectroscopy(FTIR and Boehm titration were used to determine the amount of the surface functional groups of biochars. Meanwhile the scanning electron microscopy(SEM was used to characterize the surface morphology of biochar samples. In addition, the basic physicochemical characteristics of biochar samples, such as pH value, organic carbon content and cation exchange capacity were also determined. The results showed that all of the biochar were alkaline except the sludge biochar was acidic. The organic carbon content of alfalfa biochar was the highest(588.43 g·kg-1 and sludge biochar was the lowest(168.17 g·kg-1. Furthermore, the rank of cation exchange capacity was alfalfa straw biochar, cotton straw biochar > grape vine biochar > wheat straw biochar > sludge biochar > lignite biochar. FTIR spectrum showed that there were the aromatic hydrocarbon and the oxygen group on the surface of biochar and the structure of biochar was mainly based on the aromatic rings skeleton. The total functional groups content of alfalfa straw biochar was the highest, but that of sludge biochar was the lowest. The SEM results showed that there were obvious pore structure on the surface of plant-based biochar, but none on the surface of mineral-based biochar. Alfalfa straw biochar, wheat straw biochar, cotton straw biochar and grape vine biochar can be applied to improve farmland soil quality and increase soil fertility, and lignite biochar

Energies and raw material. Annual report; Energies et matieres premieres. Rapport annuel

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

The annual report of the french General Direction of the Energy and the Raw Material (DGEMP) deals with the energy policy. The following subjects are analysed: the french program of fight against the global warming; the biogas; the radioactive wastes management program; the french nuclear industry re-organization; Tchernobyl; the electric power and gas public service; the risk prevention concerning the electric power production; the international Gaz De France protocol; the closing of the Ales mine; the cooperation ELF and TOTAL; the french para-petroleum industry; the raw material prices; the french mining situation; the french energy policy audit by the AIE; the energy accidents of december. The DGEMP organization chart with contacts and the publications are also included. (A.L.B.)

Sustainability in Supply Chain Management: Aggregate Planning from Sustainability Perspective

OpenAIRE

T?rkay, Metin; Sara?o?lu, ?zt?rk; Arslan, Mehmet Can

2016-01-01

Supply chain management that considers the flow of raw materials, products and information has become a focal issue in modern manufacturing and service systems. Supply chain management requires effective use of assets and information that has far reaching implications beyond satisfaction of customer demand, flow of goods, services or capital. Aggregate planning, a fundamental decision model in supply chain management, refers to the determination of production, inventory, capacity and labor us...

Raw materials in Africa and aspects of their utilisation; Rohstoffe in Afrika und Aspekte zu ihrer Nutzung

Energy Technology Data Exchange (ETDEWEB)

Leonhardt, Joachim [Dr. Leonhardt Consulting, Essen (Germany)

2011-03-15

Consideration of raw materials in Africa and aspects of their utilisation refers not only to raw materials and their use, but also quite importantly to the prevailing situation in Africa itself and with regard to the population, the economic situation and also the commitment of other countries. (orig.)

Performance analysis of supply chains under customer demand information sharing using role play game

Directory of Open Access Journals (Sweden)

T. Chinna Pamulety

2012-04-01

Full Text Available Supply chain is a network of organizations that work together and performs various business functions such as procurement of raw materials, converting the raw material into semi-finished or finished goods and distributing the same to their ultimate customers. Presence of bullwhip effect in a supply chain is costly and degrades the performance of the supply chain. Reduction in bullwhip effect can improve the efficiency or profitability of a supply chain. The objective of this paper is to know the impact of imperfect Advance Demand Information (ADI sharing on bullwhip effect in a four-stage serial supply chain and to evaluate the supply chain performance by conducting an experiment similar to the beer distribution game. The performance measures used are variance of orders placed by each stage, fill rate, total inventory at each stage and total holding cost of the supply chain. Results show that imperfect ADI improves the performance of the supply chain. The performance of the supply chain is also evaluated under order up to level (R, S policy with safety stock and it is found that the performance of supply chain is better when inventory policy used.

Colorimetric determination of a paracetamole in raw material and in pharmaceutical dosage forms

International Nuclear Information System (INIS)

Usifoh, C.O; Adelusi, S.A.; Adebambo, R.F.

2002-01-01

A rapid, accurate and simple method is proposed for the determination of p-acetaminophen (paracetamole) in raw material, tablets and syrups. The method is based on measuring the intensity of the yellow color that developed when acute acetaminophen is allowed to react with p-dimethylaminobenzaldehyde in 2M HCl after heating. The color which absorbs in the visible region of gamma 450 nm is stable for several hours and the intensity is directly proportional to the concentration of the drug, that is, Beer lambert law is obeyed. The method can be used to analyse paracetamole in raw material and in pharmaceutical dosage forms. (author)

Sensory properties of marinated herring (Clupea harengus) processed from raw material from commercial landings

DEFF Research Database (Denmark)

Nielsen, Durita; Hyldig, Grethe; Nielsen, Jette

2005-01-01

Sensory properties of marinated herring processed from raw material from Danish commercial catches were described and related to fishing season and biological, chemical and functional properties. Herring was caught on five cruises and stored on board in tanks or ice. The sensory profile of marina......Sensory properties of marinated herring processed from raw material from Danish commercial catches were described and related to fishing season and biological, chemical and functional properties. Herring was caught on five cruises and stored on board in tanks or ice. The sensory profile...

From raw material to dish: pasta quality step by step.

Science.gov (United States)

Sicignano, Angelo; Di Monaco, Rossella; Masi, Paolo; Cavella, Silvana

2015-10-01

Pasta is a traditional Italian cereal-based food that is popular worldwide because of its convenience, versatility, sensory and nutritional value. The aim of this review is to present a step-by-step guide to facilitate the understanding of the most important events that can affect pasta characteristics, directing the reader to the appropriate production steps. Owing to its unique flavor, color, composition and rheological properties, durum wheat semolina is the best raw material for pasta production. Although pasta is traditionally made from only two ingredients, sensory quality and chemical/physical characteristics of the final product may vary greatly. Starting from the same ingredients, there are a lot of different events in each step of pasta production that can result in the development of varieties of pasta with different characteristics. In particular, numerous studies have demonstrated the importance of temperature and humidity conditions of the pasta drying operation as well as the significance of the choice of raw material and operating conditions on pasta quality. © 2015 Society of Chemical Industry.

Raw material procurement for termite fishing tools by wild chimpanzees in the Issa valley, Western Tanzania.

Science.gov (United States)

Almeida-Warren, Katarina; Sommer, Volker; Piel, Alex K; Pascual-Garrido, Alejandra

2017-10-01

Chimpanzee termite fishing has been studied for decades, yet the selective processes preceding the manufacture of fishing tools remain largely unexplored. We investigate raw material selection and potential evidence of forward planning in the chimpanzees of Issa valley, western Tanzania. Using traditional archaeological methods, we surveyed the location of plants from where chimpanzees sourced raw material to manufacture termite fishing tools, relative to targeted mounds. We measured raw material abundance to test for availability and selection. Statistics included Chi-Squared, two-tailed Wilcoxon, and Kruskall-Wallace tests. Issa chimpanzees manufactured extraction tools only from bark, despite availability of other suitable materials (e.g., twigs), and selected particular plant species as raw material sources, which they often also exploit for food. Most plants were sourced 1-16 m away from the mound, with a maximum of 33 m. The line of sight from the targeted mound was obscured for a quarter of these plants. The exclusive use of bark tools despite availability of other suitable materials indicates a possible cultural preference. The fact that Issa chimpanzees select specific plant species and travel some distance to source them suggests some degree of selectivity and, potentially, forward planning. Our results have implications for the reconstruction of early hominin behaviors, particularly with regard to the use of perishable tools, which remain archaeologically invisible. © 2017 Wiley Periodicals, Inc.

Hydrolysis technology for producing sugars from biomass as raw material for the chemical industry- SugarTech

Energy Technology Data Exchange (ETDEWEB)

Kallioinen, A.; Hytoenen, E.; Haekkinen, M. (VTT Technical Research Centre of Finland, Espoo (Finland)), email: anne.kallioinen@vtt.fi (and others)

2011-11-15

In the SugarTech project, spruce, forest residue, birch and sugar cane bagasse have been studied as raw materials for production of sugars to be processed further to ethanol or other chemicals. These raw materials, containing high proportion of carbohydrates have been analysed and pretreated for enzymatic hydrolysis by steam explosion and oxidative methods. The pretreated materials have been studied in respect to yield and enzymatic hydrolysability. Small carboxylic acids were an interesting side product from oxidation pretreatment. For feasibility study, 8 process cases have been selected and will be compared. Optimal enzyme mixtures have been determined for hydrolysis of pretreated materials. Results show that optimal enzyme composition depends clearly on the raw material and the pretreatment method. Pretreated raw materials were also hydrolysed efficiently in high dry matter conditions with commercial enzymes. Enzyme adsorption and desorption were studied with lignocellulosic substrates aiming at recycling of enzymes in the hydrolysis process. After enzymatic hydrolysis, a major part of the enzymes remained bound to substrate in spite of high degree of hydrolysis. Desorption of enzymes could only be detected with catalytically oxidised spruce. In addition, the induction of hydrolytic system of Trichoderma reesei, which is a widely used fungus for cellulase enzyme production, has been studied in the presence of different substrates. The substrate and the pretreatment method had clear effects on gene expression profile. (orig.)

[Design and implementation of supply security monitoring and analysis system for Chinese patent medicines supply in national essential medicines].

Science.gov (United States)

Wang, Hui; Zhang, Xiao-Bo; Huang, Lu-Qi; Guo, Lan-Ping; Wang, Ling; Zhao, Yu-Ping; Yang, Guang

2017-11-01

The supply of Chinese patent medicine is influenced by the price of raw materials (Chinese herbal medicines) and the stock of resources. On the one hand, raw material prices show cyclical volatility or even irreversible soaring, making the price of Chinese patent medicine is not stable or even the highest cost of hanging upside down. On the other hand, due to lack of resources or disable some of the proprietary Chinese medicine was forced to stop production. Based on the micro-service architecture and Redis cluster deployment Based on the micro-service architecture and Redis cluster deployment, the supply security monitoring and analysis system for Chinese patent medicines in national essential medicines has realized the dynamic monitoring and intelligence warning of herbs and Chinese patent medicine by connecting and integrating the database of Chinese medicine resources, the dynamic monitoring system of traditional Chinese medicine resources and the basic medicine database of Chinese patent medicine. Copyright© by the Chinese Pharmaceutical Association.

Calibration curves of a PGNAA system for cement raw material analysis using the MCNP code

International Nuclear Information System (INIS)

Oliveira, Carlos; Salgado, Jose

1998-01-01

In large samples, the γ-ray count rate of a prompt gamma neutron activation analysis system is a multi-variable function of the elemental dry composition, density, water content and thickness of the material. The experimental calibration curves require tremendous laboratory work, using a great number of standards with well-known compositions. Although a Monte Carlo simulation study does not avoid the experimental calibration work, it reduces the number of experimental calibration standards. This paper is part of a feasibility study for a PGNAA system for on-line continuous characterisation of cement raw material conveyed on a belt (Oliveira, C., Salgado, J. and Carvalho, F. G. (1997) Optimisation of PGNAA instrument design for cement raw materials using the MCNP code. J. Radioanal. Nucl. Chem. 216(2), 191-198; Oliveira, C., Salgado, J., Goncalves, I. F., Carvalho, F. G. and Leitao, F. (1997a) A Monte Carlo study of the influence of geometry arrangements and structural materials on a PGNAA system performance for cement raw materials analysis. Appl. Radiat. Isot. (accepted); Oliveira, C., Salgado, J. and Leitao, F. (1997b) Density and water content corrections in the gamma count rate of a PGNAA system for cement raw material analysis using the MCNP code. Appl. Radiat. Isot. (accepted).]. It reports on the influence of the density, mass water content and thickness on the calibration curves of the PGNAA system. The MCNP-4A code, running in a Pentium-PC and in a DEC workstation, was used to simulate the PGNAA configuration system

Decontamination of drug vegetative raw material by relativistic electron beam

International Nuclear Information System (INIS)

Gorbanyuk, A.G.; Dikiy, I.L.; Yegorov, A.M.; Linnik, A.F.; Uskov, V.V.

2004-01-01

The new technology of decontamination of drug vegetative raw material and medical products is proposed. Advantages of use of relativistic beams in a range of electron energies from 0.5 MeV to 5 MeV for these purposes are shown in comparison with X-radiation of energy from 80 keV to 1 MeV

Characterization of Limestone as Raw Material to Hydrated Lime

Science.gov (United States)

Salem Hwidi, Rajeb; Nuraiti Tengku Izhar, Tengku; Saad, Farah Naemah Mohd

2018-03-01

In Malaysia, limestone is essentially important for the economic growth as raw materials in the industry sector. Nevertheless, a little attention was paid to the physical, chemical, mineralogical, and morphological properties of the limestone using X-ray fluorescence (X-RF), X-ray diffraction (X-RD), Fourier transform infrared spectroscopy (FTIR), and Scanning electron microscopy / energy dispersive x-ray spectroscopy (SEM-EDS) respectively. Raw materials (limestone rocks) were collected from Bukit Keteri area, Chuping, Kangar, Perlis, Malaysia. Lab crusher and lab sieved were utilized to prepare five different size of ground limestone at (75 µm, 150 µm, 225 µm, 300, and 425 µm) respectively. It is found that the main chemical composition of bulk limestone was Calcium oxide (CaO) at 97.58 wt.% and trace amount of MnO, Al2O3, and Fe2O3 at 0.02%, 0.35%, and 0.396% respectively. XRD diffractograms showed characteristic peaks of calcite and quartz. Furthermore, main FTIR absorption bands at 1,419, 874.08 and 712.20 cm-1 indicated the presence of calcite. The micrographs showed clearly the difference of samples particle size. Furthermore, EDS peaks of Ca, O, and C elements confirmed the presence of CaCO3 in the samples.

Rambutan Seed (Nephelium Lappaceum L.) Optimization as Raw Material of High Nutrition Value Processed Food

Science.gov (United States)

Wahini, M.; Miranti, M. G.; Lukitasari, F.; Novela, L.

2018-02-01

Rambutan (Nephelium Lappaceum L.) is a plant that identical with Southeast Asian countries, in some areas of Indonesia no exception, but rambutan seed is considered as a waste. Therefore, it needs to be optimized into raw materials of food and processed with high nutritional value and has economic value. The purpose of this research were: 1) to find the best rambutan seed immersion formula; 2) to know the nutritional value of the best immersed rambutan seed; 3) to produce raw material and various processed of rambutan seed product. The research method was quasi experiment with 6 treatments and 2 factorial design, materials for immersion was NaCl and Ca(OH)2. The results showed that: 1) the best rambutan seed immersion formula was using Ca(OH)2; 2) the best rambutan seed contains 1,6 ash, 31,2 protein, 26,9 fat; 3) the best rambutan seed produce flour and processed of seasoned nuts. This research indicates that rambutan seed is very potential to be an alternative high-value raw materials.

Sustainable hazardous substances management in the supply chain

NARCIS (Netherlands)

Veenvliet, H.; Valk, van der W.; Weele, van A.J.; Esposito, E.

2012-01-01

Being compliant to legal hazardous substances regulations is difficult for multinational companies that have a global network of suppliers. The presence of these chemicals has to be monitored throughout the supply chain often even up until the raw materials suppliers. Companies have also to deal

Utilization of flotation wastes of copper slag as raw material in cement production

International Nuclear Information System (INIS)

Alp, I.; Deveci, H.; Suenguen, H.

2008-01-01

Copper slag wastes, even if treated via processes such as flotation for metal recovery, still contain heavy metals with hazardous properties posing environmental risks for disposal. This study reports the potential use of flotation waste of a copper slag (FWCS) as iron source in the production of Portland cement clinker. The FWCS appears a suitable raw material as iron source containing >59% Fe 2 O 3 mainly in the form of fayalite (Fe 2 SiO 4 ) and magnetite (Fe 3 O 4 ). The clinker products obtained using the FWCS from the industrial scale trial operations over a 4-month period were characterised for the conformity of its chemical composition and the physico-mechanical performance of the resultant cement products was evaluated. The data collected for the clinker products produced using an iron ore, which is currently used as the cement raw material were also included for comparison. The results have shown that the chemical compositions of all the clinker products including those of FWCS are typical of a Portland cement clinker. The mechanical performance of the standard mortars prepared from the FWCS clinkers were found to be similar to those from the iron ore clinkers with the desired specifications for the industrial cements e.g. CEM I type cements. Furthermore, the leachability tests (TCLP and SPLP) have revealed that the mortar samples obtained from the FWCS clinkers present no environmental problems while the FWCS could act as the potential source of heavy metal contamination. These findings suggest that flotation wastes of copper slag (FWCS) can be readily utilised as cement raw material due to its availability in large quantities at low cost with the further significant benefits for waste management/environmental practices of the FWCS and the reduced production and processing costs for cement raw materials

Utilization of flotation wastes of copper slag as raw material in cement production.

Science.gov (United States)

Alp, I; Deveci, H; Süngün, H

2008-11-30

Copper slag wastes, even if treated via processes such as flotation for metal recovery, still contain heavy metals with hazardous properties posing environmental risks for disposal. This study reports the potential use of flotation waste of a copper slag (FWCS) as iron source in the production of Portland cement clinker. The FWCS appears a suitable raw material as iron source containing >59% Fe(2)O(3) mainly in the form of fayalite (Fe(2)SiO(4)) and magnetite (Fe(3)O(4)). The clinker products obtained using the FWCS from the industrial scale trial operations over a 4-month period were characterised for the conformity of its chemical composition and the physico-mechanical performance of the resultant cement products was evaluated. The data collected for the clinker products produced using an iron ore, which is currently used as the cement raw material were also included for comparison. The results have shown that the chemical compositions of all the clinker products including those of FWCS are typical of a Portland cement clinker. The mechanical performance of the standard mortars prepared from the FWCS clinkers were found to be similar to those from the iron ore clinkers with the desired specifications for the industrial cements e.g. CEM I type cements. Furthermore, the leachability tests (TCLP and SPLP) have revealed that the mortar samples obtained from the FWCS clinkers present no environmental problems while the FWCS could act as the potential source of heavy metal contamination. These findings suggest that flotation wastes of copper slag (FWCS) can be readily utilised as cement raw material due to its availability in large quantities at low cost with the further significant benefits for waste management/environmental practices of the FWCS and the reduced production and processing costs for cement raw materials.

VERAM, for a sustainable and competitive future for EU Raw Materials

Science.gov (United States)

Mobili, A.; Tittarelli, F.; Revel, G. M.; Wall, P.

2018-03-01

The project, VERAM “Vision and Roadmap for European Raw Materials”, aims to deliver a mapping of on-going initiatives on non-food, non-energy raw materials (including metals, industrial minerals, aggregates and wood) at European, Member State, and regional levels both from the Research and Innovation (R&I), industry, and policy perspectives. Moreover, based on a comprehensive gap analysis, VERAM will propose a common long term 2050 Vision and Roadmap in coordination and cooperation with all stakeholders across the value chain. For the first time, two European Technology Platforms (ETPs) together with their corresponding European Research Area Networks (ERA-NETs) are joining forces to develop a common roadmap.

Uranium in phosphorus-bearing raw materials and technological problems of its recovery

Energy Technology Data Exchange (ETDEWEB)

Gorecki, H; Gorecka, H [Politechnika Wroclawska (Poland)

1981-01-01

A problem of uranium recovery from phosphorus-bearinq raw materials is discussed. The different methods of uranium recovery from extractive phosphoric acid are briefly described. The information on their applications in the industry is also given.

21 CFR 1304.31 - Reports from manufacturers importing narcotic raw material.

Science.gov (United States)

2010-04-01

... therefrom. (g) All in-process inventories should be expressed in terms of end-products and not precursors... following information shall be submitted for each type of narcotic raw material (quantities are expressed as... opium, crude alkaloids and other derivatives (quantities are expressed as grams of anhydrous base or...

Energies and raw materials. The energy situation

International Nuclear Information System (INIS)

1997-09-01

Statistics are given on the energy and raw materials (coal, oil, etc.) production and consumption levels in France in September 1997: primary energy total consumption has increased (mobile year) of 1.1%, at the same rate since 3 years. Interior demand has varied depending on the energy: strong decrease for coal (- 5.9%), slight increase for petroleum products (+ 0.8%), strong increase for gas (+ 3.2%) and moderate increase for electricity (+ 1.7%). An increase in the dollar exchange rate and a high level of oil and gas imports have induced a record energy cost level with + 30% on one year, reaching 89.2 billions Francs, to be compared to 68.5 in September 1996

Subsidy modes, waste cooking oil and biofuel: Policy effectiveness and sustainable supply chains in China

International Nuclear Information System (INIS)

Zhang, Huiming; Li, Lianshui; Zhou, Peng; Hou, Jianmin; Qiu, Yueming

2014-01-01

Many countries are concerned with the waste-to-energy for economic development and societal welfare. This paper constructs a dynamic game model that, for the first time compares the incentive effects of four common subsidy modes on waste cooking oil supply for biofuel refining and sales of waste cooking oil refined products. The model considers the impact of preferential tax treatment, a raw material subsidy, a sales subsidy and an investment subsidy on the profits of biofuel enterprises and waste cooking oil recyclers. Results indicate that common approaches adopted in developed economies such as raw material price subsidies and finished products sales subsidies increase the profits of both biofuel enterprises and recyclers. On the contrary, investment subsidies, which are relatively common in some regions of China, increase the profits of recyclers, while reducing revenues achieved by biofuel enterprises. To promote the supply chain, policy should give priority to raw material price subsidies and finished products sales subsidies, and for investment subsidies, however, the government should be cautious

The key numbers of the mineral raw materials; Les chiffres cles des matieres premieres minerales

Energy Technology Data Exchange (ETDEWEB)

Mandil, C. [Directeur General de l`Energie et des Matieres Premieres, France (France)]|[Ministere de l`Industrie, des Postes et Telecommunications et du Commerce Exterieur, 75 - Paris (France)

1996-12-31

Mineral raw materials come from fossil reserves or ores resulting from the geologic and climatic history of the Earth. The access to economic development for 80% of the worldwide population and the high rate of demographic growth (probably 8 billions of inhabitants in 2025) are important factors that can greatly multiply the worldwide consumption of ores. In parallel, environmental concerns and the increasing need for a better equilibrium between wildlife preservation and the supply of economic needs, lead to a more reasonable and mastered use of natural resources. The aim of this book is to shade light and give global elements of thoughts on mineral resources, and for the main of those (about 30 metals and mineral substances), to review the most useful data and references about their production and consumption. For each question, chapters are devoted to the situation of France in its worldwide context. One chapter concerns the uranium ores (reserves, production, prices evolution, consumption, economic flux and companies involved). (J.S.).

Raman, Infrared, and Laser-Induced Breakdown Spectroscopy Identification of Particles in Raw Materials.

Science.gov (United States)

Lee, Kathryn; Lankers, Markus; Valet, Oliver

2018-02-01

Raw materials need to be of a certain quality with respect to physical and chemical composition. They also need to have no contaminants, including particles, because these could indicate raw material impurities or contaminate the product. Particle identification allows determination of process conditions that caused them and whether the quality of the final product is acceptable. Particles may appear to the eye to be very different things than they actually are. They may be coated with the raw material and may consist of several components; therefore, chemical and elemental analyses are required for accuracy in proper identification and definitive information about their source. Thus, microscope versions of Raman spectroscopy, laser-induced breakdown spectroscopy (LIBS), and infrared (IR) spectroscopy are excellent tools for identifying particles in materials. Those tools are fast and accurate, and can provide chemical and elemental composition as well as images that can aid identification. The micro-analysis capabilities allow for easy analysis of different portions of samples so that multiple components can be identified and sample preparation can be reduced or eliminated. The differences in sensitivities of Raman and IR spectroscopies to different functional groups as well as the elemental analysis provided by LIBS and the image analysis provided by the microscopy makes these complementary techniques and provides the advantage of identifying various chemical components. Proper spectral searching techniques and interpretation of the results are important for interpretation and identification of trace contaminants.

Investigation and analysis on ITER in-vessel coils’ raw-materials

International Nuclear Information System (INIS)

Jin, Huan; Wu, Yu; Long, Feng; Yu, Min; Han, Qiyang; Liu, Huajun

2013-01-01

Highlights: • The R and D works for the ITER in-vessel coils (IVC) are now being conducted in Institute of Plasma Physics, and the analysis work are being done by Princeton Plasma Physics Laboratory. • There is little published paper about the raw materials for ITER IVC coils. • This manuscript points out the progress of the selected materials for ITER IVC coils. -- Abstract: The ITER in-vessel coils (IVCs) consist of 27 coils edge localized modes (ELM) and 2 coils vertical stabilization (VS) which are all mounted on the vacuum vessel wall behind the shield modules. The IVCs design and manufacturing work is being conducted in between Institute of Plasma Physics Chinese Academy of Sciences (ASIPP) and Princeton Plasma Physics Laboratory (PPPL). Because the position of ELM and VS coils is close and face to the plasma, the IVCs must undergo a severe environment, such as the high dose of radiation and high operation temperature, thus the conventional electrical insulation materials cannot be used. And the technology of “Stainless Steel Jacketed Mineral Insulated Conductor” (SSMIC) is deemed as the best choice to provide the necessary radiation resistance and compatibility strength in ITER's vacuum vessel. While mineral insulated conductor technology is not new, and is similar to the mineral insulated cable used in industrial. Some difficulties still need to be solved, such as searching for the proper raw-materials to make sure that the conductor have the properties of high current carrying capability, the necessary radiation resistance, the proper strength, at the same time, it must be come true in manufacture technology. This paper described the analysis of the materials for VS and ELM coil conductor

66. The safety engineering at reprocessing of raw material from 'zero' mark and 'slaked lime'

International Nuclear Information System (INIS)

Ivanov, A.V.

1993-01-01

The safety engineering at reprocessing of raw material from 'zero' mark and 'slaked lime' was studied. All operational conditions at reprocessing of raw material from 'zero' mark and 'slaked lime' were discussed.

The fishing industry - toward supply chain modelling

DEFF Research Database (Denmark)

Jensen, Toke Koldborg; Nielsen, Jette; Larsen, Erling P.

Mathematical models for simulating and optimizing supply chain aspects such as distribution planning and optimal use of raw materials are widely used. However, modelling based on a holistic chain view is less studied, and food-related aspects such as quality and shelf life issues enforce additional...... requirements onto the chains. In this paper, we consider the supply chain structure of the Danish fishing industry and illustrate the potential of using mathematical models to identify quality and value-adding activities. This is a first step toward innovative supply chain modelling aimed to identify benefits...... for actors along chains in the fishing industry....

Developing sustainable food supply chains.

Science.gov (United States)

Smith, B Gail

2008-02-27

This paper reviews the opportunities available for food businesses to encourage consumers to eat healthier and more nutritious diets, to invest in more sustainable manufacturing and distribution systems and to develop procurement systems based on more sustainable forms of agriculture. The important factors in developing more sustainable supply chains are identified as the type of supply chain involved and the individual business attitude to extending responsibility for product quality into social and environmental performance within their own supply chains. Interpersonal trust and working to standards are both important to build more sustainable local and many conserved food supply chains, but inadequate to transform mainstream agriculture and raw material supplies to the manufactured and commodity food markets. Cooperation among food manufacturers, retailers, NGOs, governmental and farmers' organizations is vital in order to raise standards for some supply chains and to enable farmers to adopt more sustainable agricultural practices.

Uranium refining in South Africa. The production of uranium trioxide, considering raw material properties and nuclear purity requirements

International Nuclear Information System (INIS)

Colborn, R.P.; Bayne, D.L.G.; Slabber, M.N.

1980-01-01

Conventional practice results in raw materials being delivered to the uranium refineries in a form more suitable for transportation than for processing, and therefore the refineries are required to treat these raw materials to produce an acceptable intermediate feed stock. During this treatment, it is advantageous to include a purification step to ensure that the feed stock is of the required purity for nuclear grade uranium hexafluoride production, and this usually results in ammonium diuranate slurries of the required quality being produced as the intermediate feed stock. All subsequent processing steps can therefore be standardized and are effectively independent of the origin of the raw materials. It is established practice in South Africa to transport uranium as an ammonium diuranate slurry from the various mines to the Nufcor central processing plant for UOC production, and therefore the process for the production of uranium hexafluoride in South Africa was designed to take cognizance of existing transport techniques and to accept ammonium diuranate slurries as the raw material. The South African refinery will be able to process these slurries directly to uranium trioxide. This paper discusses the conditions under which the various ammonium diuranate raw materials, exhibiting a wide range of properties, can be effectively processed to produce a uranium trioxide of acceptably consistent properties. Mention is also made of the uranium hexafluoride distillation process adopted

DELINEATION OF BOUNDARY CONTOURS OF MINERAL RAW MATERIALS WITHIN THE DEPOSIT SPACE CONSIDERING THE QUALITY

Directory of Open Access Journals (Sweden)

Ivan Tomašić

1990-12-01

Full Text Available On the basis of performed explorations, in the phase of deposit preparation and development for exploitation the obtained results regarding the raw material quality were transfered to the surface. The results served both for the development and planning of deposit excavation dynamics and for the delineation of boundary contours by mineral raw materials within the deposit space considering the quality, The case presented in the article refers to the marl and limestone open pit for the cement industry, the »Partizan« near Split (the paper is published in Croatian.

1.2. X-ray phase analysis of borosilicate raw material

International Nuclear Information System (INIS)

Mirsaidov, U.M.; Kurbonov, A.S.; Mamatov, E.D.

2015-01-01

Present article is devoted to X-ray phase analysis of borosilicate raw material. The thermo gram of initial borosilicate ore was considered. The X-ray pattern of initial danburite of Ak-Arhar Deposit was considered as well. The X-ray pattern of danburite of Ak-Arhar Deposit after pre-baking was studied. The X-ray pattern of initial danburite concentrate was studied as well.

Dynamic replenishment, production, and pricing decisions in the face of supply disruption and random price-sensitive demand

NARCIS (Netherlands)

Zhu, Stuart X.

2013-01-01

We study a joint decision problem for replenishment, production, pricing strategies in the face of both supply and demand uncertainties. The supply of the raw material suffers from a potential supply disruption while the demand for the finished goods is price-sensitive and random. We assume that the

Supply assurance by versatile energy systems

International Nuclear Information System (INIS)

Jaek, W.

1982-01-01

The scope of future possibilities of covering the energy requirements of the Federal Republic of Germany has been explained in four sessions handling the topics: structure and covering of the primary energy requirements, contributions of fossil and other energy sources, hydrocarbons and nuclear energy as well as perspectives and political reaction. All energy carriers are required in order to guarantee supply safety, but the industrial nations should make greater use of their know-how and capitals in order to meet short supply of raw material with flexibility. (orig.) [de

Petroleum as a raw material resource for sustainable development

International Nuclear Information System (INIS)

Egorov, O.I.

1996-01-01

Author notes that for economic and social region development it is necessary has been created large petroleum chemical plants near by Atyrau city (initial raw material - Tengiz, Korolev and other petroleum deposits of this region) and Aktau (Mangistau and Bazuchin petroleum). Realization of projects for structure changes of petroleum and gas region demands a great investments. It is noted that growing scales of petroleum and gas resources mastering calls already a considerable environmental complications because of Caspian Sea's level marking rise

Energies and raw materials. The energy situation

International Nuclear Information System (INIS)

1997-11-01

Statistics are given on the energy and raw materials (coal, oil, etc.) production and consumption levels in France in November 1997: primary energy total consumption has increased (mobile year) of 0.6%, at a slightly inferior rate than the rate since 3 years. Interior demand has varied depending on the energy: strong decrease for coal (- 9.3%), slight increase for petroleum products (+ 1.2%), markedly slowing down increase for gas (+ 1.4%) and moderate increase for electricity (+ 1.3%). An increase in the dollar exchange rate and a high level of oil and gas imports have induced a maintained high energy cost level with + 14% on one year, reaching 86.8 billions Francs, to be compared to 76.1 in November 1996

Raw material variability of an active pharmaceutical ingredient and its relevance for processability in secondary continuous pharmaceutical manufacturing.

Science.gov (United States)

Stauffer, F; Vanhoorne, V; Pilcer, G; Chavez, P-F; Rome, S; Schubert, M A; Aerts, L; De Beer, T

2018-06-01

Active Pharmaceutical Ingredients (API) raw material variability is not always thoroughly considered during pharmaceutical process development, mainly due to low quantities of drug substance available. However, synthesis, crystallization routes and production sites evolve during product development and product life cycle leading to changes in physical material attributes which can potentially affect their processability. Recent literature highlights the need for a global approach to understand the link between material synthesis, material variability, process and product quality. The study described in this article aims at explaining the raw material variability of an API using extensive material characterization on a restricted number of representative batches using multivariate data analysis. It is part of a larger investigation trying to link the API drug substance manufacturing process, the resulting physical API raw material attributes and the drug product continuous manufacturing process. Eight API batches produced using different synthetic routes, crystallization, drying, delumping processes and processing equipment were characterized, extensively. Seventeen properties from seven characterization techniques were retained for further analysis using Principal Component Analysis (PCA). Three principal components (PCs) were sufficient to explain 92.9% of the API raw material variability. The first PC was related to crystal length, agglomerate size and fraction, flowability and electrostatic charging. The second PC was driven by the span of the particle size distribution and the agglomerates strength. The third PC was related to surface energy. Additionally, the PCA allowed to summarize the API batch-to-batch variability in only three PCs which can be used in future drug product development studies to quantitatively evaluate the impact of the API raw material variability upon the drug product process. The approach described in this article could be applied to any

Supply Chain Management in Industrial Symbiosis Networks

DEFF Research Database (Denmark)

Herczeg, Gabor

2016-01-01

, as well as in policy documents from e.g. the European Union, the concepts of circular econ- omy and closed-loop supply chains have received significant attention. One of the manifestations of these developments are industrial symbiosis networks. These networks are a collaborative effort to more...... sustainable production op- erations, and are characterized by a supply chain reconfiguration that uses one company’s wastes or by-products as a raw material for another company, avoiding waste disposal while also reducing material requirements. The re- sulting networks of relationships contribute to regional...... sustainable develop- ment efforts, and emphasize synergistic relations, community, and collabora- tion. This thesis takes an operations and supply chain management perspec- tive on industrial symbiosis networks. More specifically, the thesis elaborates on the collaborative and competitive characteristics...

The fish industry - toward supply chain modelling

DEFF Research Database (Denmark)

Jensen, Toke Koldborg; Nielsen, Jette; Larsen, Erling

2010-01-01

such as quality and shelf-life issues enforce additional requirements onto the chains. In this article, we consider the supply chain structure of the fish industry. We discuss and illustrate the potential of using mathematical models to identify quality and value-adding activities. The article provides a first......Mathematical models for simulating and optimizing aspects of supply chains such as distribution, planning, and optimal handling of raw materials are widely used. However, modeling based on a holistic chain view including several or all supply chain agents is less studied, and food-related aspects...... step toward innovative supply chain modeling aimed to identify benefits for all agents along chains in the fish industry....

4.2. The kinetics of nitric acid decomposition of calcined borosilicate raw material of Ak-Arkhar Deposit

International Nuclear Information System (INIS)

Mirsaidov, U.M.; Kurbonov, A.S.; Mamatov, E.D.

2015-01-01

Present article is devoted to kinetics of nitric acid decomposition of calcined borosilicate raw material of Ak-Arkhar Deposit. The dependence of nitric acid decomposition of calcined boric raw material for extraction of boron oxide on temperature (20-100 deg C) and process duration (15-60 minutes) was defined. It was defined that at temperature increasing the extraction rate of boron oxide increases from 20.8 to 78.6%.

Failures in combined knowledge and material supply chains

DEFF Research Database (Denmark)

Koch, Christian

2005-01-01

by configuration by project. In such a setting creating value for the customers and the enterprises becomes dependent of the ability to organise and coordinate in the supply chains. That the configuration is not always successful can be demonstrated by studying the emergence of failures occurring in the supply......-month observation period. These were compiled and analysed. The economic consequences are calculated to be 8% of the production costs. The analysis of relations in the supply chain both shows relations to materials and knowledge chains and their interaction. Most of the failures were generated in the knowledge...... stream and then occasionally transfer into the material stream. The paper proposes initiatives to strengthen partnerships in supply chains and especially at engineer to order production. The contradiction between the permanent enterprise organisation potentially capable of handling purchasing...

Dependence of quality properties for grey iron on used raw materials

Directory of Open Access Journals (Sweden)

E. Weiss

2009-01-01

Full Text Available Grey iron castings keep the first place among castings on base of iron. Present trend in growing entrance production costs of cast stock force manufacturer to cost minimizing. Therefore is most actual deal replacement pig iron by steel scrap. In contribution are presented results research work relating to influence of raw materials on grey iron properties.

Cocoa pulp juice (sweatings) as a potential raw material for the ...

African Journals Online (AJOL)

Cocoa sweatings is a very interesting by-product of cocoa production and it forms the substrate for microbial growth during the fermentation process. Most of the sweatings go to waste during the processing of the cocoa beans and this has led to its utilization as a potential raw material for the development of soft drink to ...

Potential of Technogenic Mineral Raw Materials in Russia and the Issues of its Rational Use

Directory of Open Access Journals (Sweden)

Larisa Ivanovna Goncharova

2015-11-01

Full Text Available The increasing negative impact of mining waste on natural ecosystems often leads to their irreversible destruction, a trend that is gradually becoming global. The particular relevance of the research is explained, on the one hand, by the possibilities of minimization of specific volumes of formation of mining waste in all types of industries; on the other hand, by the possibilities of maximization of comp rehensive use of their valuable components as secondary material resources on an economically rational basis and the possibilities of restoring the disturbed natural environment. The rational use of natural and technogenic mineral raw materials is greatly facilitated by the geological exploration and geological-economic evaluation of the resources, which requires the development of specific methodological approaches to the economic justification of resource estimation parameters for outlining and calculating the multicomponent commercial reserves of raw materials and separate valuable components in them. Analysis shows that researchers’ opinions on a number of methodological principles of sustainable mining, complex processing of multicomponent materials are often contradictory. Scientific publications do not consider the issue of the price valuation of mining waste as secondary material resources. Mining waste processing should be considered as an important part of the overall socio-ecological-economic system for rational nature management. The analysis of the existing practice of using the mining waste should be based on the system approach and take into consideration geological, technological, economic, environmental and social characteristics throughout the cycle of production, combined processing and treatment of secondary waste according to the principle “from the earth to the earth”. The article identifies the main barriers to the recycling of mining wastes, proposes several methodological guidelines for the sustainable mining and

Radiation decontamination of pharmaceutical raw materials as an integral part of the good pharmaceutical manufacturing practice (GPMP)

Energy Technology Data Exchange (ETDEWEB)

Razem, D; Katusin-Razem, B [Institut Rudjer Boskovic, Zagreb (Yugoslavia); Starcevic, M; Galekovic, B [PLIVA Pharmaceutical Works, Zagreb (Yugoslavia)

1990-01-01

The microbiological quality of many raw materials used in the manufacture of pharmaceuticals and adjuvants often fails to meet the standards set by the pharmaceutical industry. Raw materials of biological provenience are particularly susceptible to contamination. This work describes the present situation regarding the microbial load of corn starch. Given the accepted microbiological criteria, irradiation treatment is proposed as integral to Good Pharmaceutical Manufacturing Practice (GPMP). The use of total viable count as a guide for specifying microbial limits for non-sterile materials is supported. Criteria for the choice of dose are discussed. (author).

Radiation decontamination of pharmaceutical raw materials as an integral part of the good pharmaceutical manufacturing practice (GPMP)

International Nuclear Information System (INIS)

Razem, D.; Katusin-Razem, B.; Starcevic, M.; Galekovic, B.

1990-01-01

The microbiological quality of many raw materials used in the manufacture of pharmaceuticals and adjuvants often fails to meet the standards set by the pharmaceutical industry. Raw materials of biological provenience are particularly susceptible to contamination. This work describes the present situation regarding the microbial load of corn starch. Given the accepted microbiological criteria, irradiation treatment is proposed as integral to Good Pharmaceutical Manufacturing Practice (GPMP). The use of total viable count as a guide for specifying microbial limits for non-sterile materials is supported. Criteria for the choice of dose are discussed. (author)

Meeting of Energy Needs During the Period of Raw Materials Insufficiency in the 21st Century (Bulgaria, Czech Republic, Poland, Russia and Slovakia cooperation - draft of project

International Nuclear Information System (INIS)

Lelek, V.; Apostolov, T.; Petrov, B.; Chwaszcewski, S.; Andrzejewski, K.; Subbotin, S.; Tsibulskij, V.; Darilek, P.; Zajac, R.; Breza, J.

2006-01-01

The main aim of the work is to give into the mutual harmony long term planning of nuclear energy (contemporary power station has supposed lifetime 70 years and will need at least ten years from the decision to full realization) with the possibility of raw materials supply during the whole lifetime. But situation is not so uniquely directed only to nuclear energy - classical sources (coal, gas and oil) are supposed to be exhausted surely in this century (coal could be regionally dependent) and specially Europe will be practically net consumer of energy raw materials. Ways to stabilize market could be production of hydrogen and use of U238 and Th232 in the new reactors. But developments needed to influence practical industrial demand is about 30 years to be able to start to build up industrial new type nuclear power-stations and money of the order of several billion dollars. At the same time political unification has consequence on local raw material resources, which could hardly be interpreted only as the local or national ownership. Their price could sharply rise and there will be pressure to use it not only for energy production, but also as the chemical raw material. Moreover it is expected that in the half of this century the price of natural uranium will be limiting factor for the contemporary PWR reactors use and that there will be necessary to start fast breeders or use thorium fuel to cover demands. Last estimations about the oil peaking and its consequences are included. Armenia, Lithuania and Ukraine representatives expressed will to join the project. Common will is expressed in the presentation to try to understand commonly the future development and to find common solution to the future challenges (Authors)

Utilization of Delignified Sawdust as Raw Material of Biogas Production

Directory of Open Access Journals (Sweden)

Zumalla Asfarina

2018-01-01

Full Text Available Biogas is one alternative to replace the irreplaceable energy source that has begun to diminish its existence. The raw materials for biogas manufacture are renewable biomass, usually using plantation waste, agriculture, and livestock. Using biogas can also reduce environmental pollution. One of the agricultural waste that has great potential to become the raw material of biogas is teak sawdust. Wood processing industry in Indonesia quite a lot, but wood has a high lignosesluosa content, so it needs the right method to process it. With the delignification of lignin levels on teak sawdust will decrease. Wood sawdust is soaked using NaOH for 1, 2, 3, and 4 days with 4% w / v concentration. The lowest lignin and hemicellulose content was 25.79% and 87.9% in pretreatment for 4 days, while the highest cellulose level was 57, 34%. The accumulated volume of biogas at 1 day pretreatment, ie 709 ml / g TS. Gcms shows the enlarged peak area of methanamine, N-methyl from before pretreatment. The fastest biogas formation (λ in 4 days pretreatment, 1.60403 days and the largest constant A and U variables at 1 day were 914.5903 ml / g TS and 34.59765 ml / g TS.

Annual report 2001. General direction of energy and raw materials; Rapport annuel 2001. Direction generale de l'energie et des matieres premieres

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

This report summarizes the 2001 activity of the French general direction of energy and raw materials (DGEMP) of the ministry of finances and industry: 1 - security of energy supplies: a recurrent problem; 2001, a transition year for nuclear energy worldwide; petroleum refining in font of the 2005 dead-line; the OPEC and the upset of the oil market; the pluri-annual planning of power production investments; renewable energies: a reconfirmed priority; 2 - the opening of markets: the opening of French electricity and gas markets; the international development of Electricite de France (EdF) and of Gaz de France (GdF); electricity and gas industries: first branch agreements; 3 - the present-day topics: 2001, the year of objective contracts; AREVA, the future to be prepared; the new IRSN; the agreements on climate and the energy policy; the mastery of domestic energy consumptions; the safety of hydroelectric dams; Technip-Coflexip: the birth of a para-petroleum industry giant; the cleansing of the mining activity in French Guyana; the future of workmen of Lorraine basin coal mines; 4 - 2001 at a glance: highlights; main legislative and regulatory texts; 5 - DGEMP: November 2001 reorganization and new organization chart; energy and raw materials publications; www.industrie.gouv.fr/energie. (J.S.)

The role of inventory in the supply chain

OpenAIRE

Mihai Felea

2008-01-01

The supply chain is a system coordinated by organizations, humans, activities, information and resources involved in the movement of a product in a physical and virtual manner from the supplier to the client. The activities from the supply chain transform raw materials and components in a product that is delivered to the consumer or to the user. The inventory, together with the transport, the location of the production spaces and of the storage represent an important factor that influences th...

Causes of shortage and delay in material supply: a preliminary study

Science.gov (United States)

Rahman, M. M.; Yap, Y. H.; Ramli, N. R.; Dullah, M. A.; Shamsuddin, M. S. W.

2017-11-01

Shortage and delay in materials supply is argued to be one of the most important factors that lead to delay in construction project delivery globally. However, the relevant underlying reasons vary from country to country. As such, this paper summarises the outcomes of a study that targeted identifying causes of shortage and delay in materials supply in Brunei Darussalam. The study was conducted through fifteen semi-structured interviews of contractors and materials suppliers in Brunei. The study identified six causes of shortageof materials and nine causes of delay in materials supply in Brunei. The most importantcausefor shortage of materials relates to the origin or availability of construction materials. On the other hand, the most influential cause of delay in material supply was found to be poor materials procurement and inventory management system, which has other underlying reasons such as late identification of the type of materials needed. The observations are expected to help in formulating or reviewing relevant policies, in order to ensure on-time project delivery.

Investigation of Inonotus obliquus (Pers. Pil. Extracts and Melanins after RF-plasma Treatment of Raw Material

Directory of Open Access Journals (Sweden)

O.Yu. Kuznetsova

2016-03-01

Full Text Available High-frequency capacitive discharge (RF plasma at low pressure was used as preliminary stage for the intensification of extraction from natural medicinal raw material. RF-plasma treatment was carried out in two modes differed by the nature of plasma-forming gas. Chaga (Inonotus obliquus (Pers. Pil. known as the birch mushroom was selected as a perspective source of raw material. Extraction was carried out in two ways – remaceration and maceration. The analy-sis of chaga extracts and melanins was performed using traditional techniques including determination of physical and chemical, antioxidant and spectral characteristics. The obtained extracts and melanins were compared to the control samples and literature data. RF-plasma treatment of medicinal raw material increased the yield of extractive substances, in particular of the main active component of chaga – melanin. The antioxidant activity of chaga extracts grew, while for melanins it remained at the level similar to that of control samples. The IR spectral characteristics of the studied chaga melanins are similar and agree well with the literature data. Insignificant deviations in the position and intensity of absorption strips were observed for the samples after RF treatment. IR spectra of the studied chaga melanins are similar to those for mushroom melanins, thereby confirming the similarity in their nature. RF-plasma treatment of chaga medicinal raw materials allows to modify them partially. The structural and mechanical properties of melanins modified by RF plasma remain the same.

Raw material changes and their processing parameters in an extrusion cooking process

DEFF Research Database (Denmark)

Cheng, Hongyuan; Friis, Alan

In this work, the effects of raw material and process parameters on product expansion in a fish feed extrusion process were investigated. Four different recipes were studied with a pilot-scale twin-screw co-rotating extruder according to a set of pre-defined processing conditions. In the four rec...

Elaborations in the area of complex reprocessing of mineral raw materials

International Nuclear Information System (INIS)

Mirsaidov, U.M.

2002-01-01

In present time complex using of raw materials has important significance as it connected with solving problems of creating of waste less and ecologically clean technologies. Elaboration and assimilation of waste less technologies has special significance for chemical, mountain-chemical, metallurgical branches of industry. In this part of book author gives several methods of waste less and ecologically clean technologies

Characterisation of Cements From Dominantly Volcanic Raw Materials of the Carpathian Bend Zone

Directory of Open Access Journals (Sweden)

Halmagy Timea

2016-12-01

Full Text Available This paper presents the results of laboratory investigations regarding the production of cements from local raw materials, such as limestone from Varghis, gypsum from Nucsoara, basaltic scoria from Racosul de Jos, volcanic tuff from Racosul de Sus, diatomite from Filia, and red mud from Oradea. The raw mixtures, based on modified Bogue calculations, contain limestone, gypsum, and one or two of the above-mentioned materials. The cements resulted from clinker grinding in a laboratory gas furnace at 1260-1300 °C, with one hour at the peak temperatures, and were characterised for Blaine specific surface area, specific density, and mineral phases. Physico-mechanical properties, such as water content for normal consistency, setting time, soundness, and compressive strength were also determined. Results show that these cements contain belite, ferrite, calcium sulphoaluminate, anhydrite, and some minor compounds.

Hook tool manufacture in New Caledonian crows: behavioural variation and the influence of raw materials.

Science.gov (United States)

Klump, Barbara C; Sugasawa, Shoko; St Clair, James J H; Rutz, Christian

2015-11-18

New Caledonian crows use a range of foraging tools, and are the only non-human species known to craft hooks. Based on a small number of observations, their manufacture of hooked stick tools has previously been described as a complex, multi-stage process. Tool behaviour is shaped by genetic predispositions, individual and social learning, and/or ecological influences, but disentangling the relative contributions of these factors remains a major research challenge. The properties of raw materials are an obvious, but largely overlooked, source of variation in tool-manufacture behaviour. We conducted experiments with wild-caught New Caledonian crows, to assess variation in their hooked stick tool making, and to investigate how raw-material properties affect the manufacture process. In Experiment 1, we showed that New Caledonian crows' manufacture of hooked stick tools can be much more variable than previously thought (85 tools by 18 subjects), and can involve two newly-discovered behaviours: 'pulling' for detaching stems and bending of the tool shaft. Crows' tool manufactures varied significantly: in the number of different action types employed; in the time spent processing the hook and bending the tool shaft; and in the structure of processing sequences. In Experiment 2, we examined the interaction of crows with raw materials of different properties, using a novel paradigm that enabled us to determine subjects' rank-ordered preferences (42 tools by 7 subjects). Plant properties influenced: the order in which crows selected stems; whether a hooked tool was manufactured; the time required to release a basic tool; and, possibly, the release technique, the number of behavioural actions, and aspects of processing behaviour. Results from Experiment 2 suggested that at least part of the natural behavioural variation observed in Experiment 1 is due to the effect of raw-material properties. Our discovery of novel manufacture behaviours indicates a plausible scenario for the

PRACTICAL PROPOSALS AS A RESULT OF THEORETICAL AND EXPERIMENTAL STUDIES OF THE PROCESS OF EXTRACTION FROM RAW MATERIALS OF PLANT ORIGIN

Directory of Open Access Journals (Sweden)

I. I. Shishatskii

2014-01-01

Full Text Available Summary. Theoretical and experimental researches of extraction processes from plant origin raw materials: barley, acorns and chicory with liquid carbon dioxide, as well as lupin with cheese whey were carried out. Quality indicators of extracts and secondary raw materials are defined. It is established that they are perspective raw sources for the enriched and functional products as they contain amino acids, vitamins and microelements. The dairy-vegetative lupine extract, for example, contains 17 amino acids, including the essential as well as vitamins and minerals. The studies of secondary raw materials, barley, acorns, chicory and lupine quality showed the expediency of their use for foods enrichment. Quality indicators of secondary raw materials are presented in the tables form in the given work. It formed the basis for the development of hardware-technological schemes of obtaining СО2-extracts and their use. The hardware-technological scheme of obtaining СО2-extracts from barley, acorns and chicory includes a number of equipment units: motor transport for raw materials delivery to the enterprise, the scraper hydroconveyor, the jet washer, a photoseparator for of poor-quality raw materials and impurities removal, a blowing machine for removing surface moisture from the raw materials, a jet washer for peeling, a cutter, drying and frying device, a crusher, a roller machine tool and an extracting unit. Hardware providing for yoghurt technology enriched with amino acids, microelements and vitamins which are present in a dairy-plant extract differs from the mentioned above one in the following. The extract used is a cheese whey, and the extraction of a target component is carried out in a vibrating extractor. The hardwaretechnological scheme is made according to Russian technology of yoghurt and furnished with the equipment for dairy-vegetative extract feeding into a product. It includes the following: a vibrating extractor (not shown in fig

Variations in the wood raw material for pellets manufacture and its influence on the quality of wood pellets; Variationer inom traeraavaran foer pelletstillverkning och deras paaverkan paa pelletskvaliteten

Energy Technology Data Exchange (ETDEWEB)

Jirjis, Raida; Vinterbaeck, Johan; Engberg, Jessica [Swedish Univ. of Agricultural Sciences, Uppsala (Sweden). Dept. of Bioenergy; Oehman, Marcus [ETC Energitekniskt Centrum, Piteaa (Sweden)

2002-05-01

The aim of this project was to study the variations in properties of raw material and its effect on pellets quality. The project included three parts which together would help describe the relationship between material properties, process parameters and fuel quality. The first part dealt with a small-scale production of pellets using a well defined raw material. The objectives of this part were to study the effect of tree species, stem diameter and storage of raw material on pellets quality. In the second part of the project data concerning characteristics of raw material and product quality were collected from two pellet factories: SAABI AB, where spruce is the major raw material, and Bioenergi i Luleaa AB, which uses mainly sawdust from pine. The objectives of this part of the project were to analyse and evaluate the relationship between raw material properties/process parameters and fuel quality using multivariate data analysis. Part three of this project involved a questionnaire survey in which pellets producers were asked at four occasions during one year of production, to give information about variations in raw material properties during various seasons, characteristics of the material during pressing and to supply data related to process parameters. Data concerning variations in pellet quality during the whole year were also requested. The sawdust used in the first part of the project was originated from small diameter trees (14 cm in average) and large diameter stems (30-36 cm) of Scots pine and Norway spruce. One third of the material was dried at room temperature to a moisture content (MC) around 12 % (fresh weight basis), then frozen until needed. The rest of the material was stored in 32 plastic net bags in a large outdoor pile during the period end of May-January. The average dry matter loss in all assortments after eight months of storage was about 0.5 % per month. An attempt to produce pellets from the fresh and stored material from the various

Whey as a raw material for the production of functional beverages

Directory of Open Access Journals (Sweden)

Bulatović Maja Lj.

2012-01-01

Full Text Available One of the least utilized by-products of food industry, despite the great potential that is described, is the whey, which is obtained as a by-product of the technological process production of cheese and casein. The excess whey, which occurs in this process in very high yields, with failure to processing is becoming a very big polluter, what is completely at odds with the potential that such materials possess. On the other hand, the modern tempo and way of life, and increasingly polluted environmental also, impose the need to produce food products that would help the human body in the fight against harmful agents which are exposed to daily. One of the more effective solution is the production of fermented functional beverages based on whey, which achieved this intention in the most natural and most comfortable way. Considering the rather untapped potential of whey as a raw material and growing food shortages in the world market, the aim of this study was to analyze the possibilities of production of functional beverages based on whey, with satisfactory sensory characteristics, in order to demonstrate the attractiveness of whey as raw material in the food industry. This paper presents an overview of the wide possibilities for the use of whey with a special emphasis on its attractiveness and the necessity of its utilizing.

The Mousterian lithic assemblage of the Ciota Ciara cave (Piedmont, Northern Italy: Exploitation and conditioning of raw materials

Directory of Open Access Journals (Sweden)

Sara Daffara

2014-09-01

Full Text Available The Ciota Ciara cave is situated in Monte Fenera’s karst (Borgosesia – Vercelli, at 670 metres above sea level. It is the most important evidence of a Middle Palaeolithic settlement in Piedmont: the cave was used by Homo neanderthalensis during the OIS 5, in a mild-humid period, as proven by faunal remains. The environment was characterized by deciduous woodland and glades. The intersection between different habitats, the presence of lithic raw materials, the karst morphology and water sources were certainly the main factors that encouraged human settlement during the Upper Pleistocene period, between 80.000 and 70.000 BP.In 2009 systematic excavations began in the cave by the University of Ferrara, in partnership with the Soprintendenza per i Beni Archeologici del Piemonte e del Museo di Antichità Egizie. Research focused on the cave’s atrium where three stratigraphic units were investigated: 13, 103 and 14.The exploited raw materials’ characterization were made by the stereo-microscope observations and through the SEM (Scanning Electron Microscope. Several lithologies are represented in different proportion: quartz is the predominant exploited raw material, followed by spongolite, sandstone, mylonite and opal. The archaeological record consists of various typologies of quartz: macro-crystalline pegmatite quartz, micro-crystalline pegmatite quartz and hyaline quartz. All these types of raw materials have been found in the proximity of the archaeological site, within 5 km range.The lithic assemblage is made of flakes, retouched tools, cores and debris. The raw materials exploitation was achieved through the direct percussion technique with various methods: S.S.D.A., discoid and Levallois. The reduction sequences on quartz are complete, although no refitting was found. The reduction sequence is not complete for most part of the other raw materials. The débitage products are small-medium size (1-4 cm and have different morphologies

Nuclear raw materials. Knowledge status after the Geneva conference (September 1958)

International Nuclear Information System (INIS)

Lecoq, M.; Mabile, J.; Carrat, G.; Ginocchio, A.; Roques, E.; Waynbaum, M.; Chervet, J.; Branche, G.; Geffroy, J.; Le Goff, M.

1959-05-01

The authors propose a synthesis of the numerous contributions presented at the Geneva conference. They first address deposits: uranium deposits (studies on uranium geochemistry and metallogeny, descriptions of various deposit types such as those associated with sedimentary layers or tectonic structures or petrographic types), thorium deposits, beryllium deposits, zirconium deposits. A second part addresses research methods and equipment: descriptive mineralogical studies, analytic physical or chemical methods, analytic field methods, isotope analysis, prospecting methods (geochemical techniques, radiometry, geophysical methods, general remarks on prospecting methods, organization of prospecting operations, and techniques of deep prospecting). The third part addresses the issues of reserves and resources: definitions, assessment techniques, geographical distribution of reserves and resources. The fourth part addresses the exploitation: quarries, underground exploitation, measures for personnel protection. The fifth part addresses ore concentration: determination of uranium ore and other raw material, concentration by physical means, ore concentration by chemical means, ore sampling, and plant monitoring and regulation. The last part addresses the economy of raw materials: uranium (cost price and production, and purchase and selling prices in different countries, world market in 1960 and on a longer term), thorium, beryllium, zirconium, lithium and helium

Definition of price in circular raw materials from the process of incineration of hazardous industrial waste in sicilian a high risk area

Science.gov (United States)

Matarazzo, Agata; Baglio, Lorenzo; Bonanno, Sandro; Fichera, Andrea; Leanza, Andrea; Russo, Gabriele; Amara, Giovanni; Amara, Giuseppe; Gigli, Carlo; Lombardo, Enrico

2018-05-01

Waste is classified (art.184, sub. 1, L.D. n.152/2006) as urban or special depending on its origin and whether it is dangerous or not, as well as the degree of danger. The reuse and recycling of materials are two of the main features that characterize the concept of the circular economy. Every firm operating in the field of the circular economy should adopt an industrial approach based on resource efficiency and the use and supply of sustainable raw materials, which can be achieved through innovative technologies, innovative methodologies and new business models. GE.S.P.I, has become a leading firm in the sector of hazardous industrial waste disposal, adding value to waste through a groundbreaking technology. The result of the process is the production of energy, as well as the creation of ash; this ash is then treated in order to separate dangerous heavy metals from the ash through the technique of eddy currents. Metals and purified ash are then put on the market. The aim of this paper is the price definition of this special waste thanks to the analysis of the specific second raw materials market. In this firm, incineration is a process where emissions are strongly controlled by innovative instruments in order to excel in the social and environmental respect. Through SWOT analysis we moreover describe how a company can turn the weaknesses of a high risk area into opportunities and value becomes a useful problem solving instrument to analyze logistic, marketing, and social responsibility, in the perspective of the optimization of eco-management material flows.

The current and perspective problems of nuclear power fuel supply

International Nuclear Information System (INIS)

Solonin, M.I.; Konovalov, I.I.

2003-01-01

Conception of fuel supply is comprised of supplying of natural uranium resources, nuclear fuel production including engineering stages of refining, enriching, production, use of secondary uranium and plutonium raw materials. The structure of nuclear fuel cycle is considered. Enterprises of the Russian nuclear fuel cycle, world recourses and fundamental producers of uranium are performed, demands in natural uranium of Russian and frontier NPP to 2010 are demonstrated. Dynamics of the development of separate methods - diffusion and centrifugal is presented as well as parameters of fuel supply at Russian and frontier NPP are compared [ru

The increasing multifunctionality of Agricultural Raw Materials: Three dilemmas for Innovation and Adoption

NARCIS (Netherlands)

Boehlje, M.; Bröring, S.

2011-01-01

Agricultural raw materials are increasingly being used for multiple industries or sectors beyond the traditional fiber and nutrition industries: energy in the form of ethanol and biodiesel, industrial products such as polymers and bio-based synthetic chemicals and fibers, and pharmaceutical/health

New supply for canyon fire foam system

International Nuclear Information System (INIS)

Gainey, T.

1995-01-01

The raw water supply for the B-Plant Canyon fire foam system is being replaced. The 4 inche water supply line to the foam system is being rerouted from the 6 inches raw water line in the Pipe Gallery to the 10 inches raw water main in the Operating Gallery. This document states the acceptance criteria for the flushing and testing to be performed by the contractor

Annual report 2001. General direction of energy and raw materials; Rapport annuel 2001. Direction generale de l'energie et des matieres premieres

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

This report summarizes the 2001 activity of the French general direction of energy and raw materials (DGEMP) of the ministry of finances and industry: 1 - security of energy supplies: a recurrent problem; 2001, a transition year for nuclear energy worldwide; petroleum refining in font of the 2005 dead-line; the OPEC and the upset of the oil market; the pluri-annual planning of power production investments; renewable energies: a reconfirmed priority; 2 - the opening of markets: the opening of French electricity and gas markets; the international development of Electricite de France (EdF) and of Gaz de France (GdF); electricity and gas industries: first branch agreements; 3 - the present-day topics: 2001, the year of objective contracts; AREVA, the future to be prepared; the new IRSN; the agreements on climate and the energy policy; the mastery of domestic energy consumptions; the safety of hydroelectric dams; Technip-Coflexip: the birth of a para-petroleum industry giant; the cleansing of the mining activity in French Guyana; the future of workmen of Lorraine basin coal mines; 4 - 2001 at a glance: highlights; main legislative and regulatory texts; 5 - DGEMP: November 2001 reorganization and new organization chart; energy and raw materials publications; www.industrie.gouv.fr/energie. (J.S.)

INCIDENCE OF FILAMENTOUS FUNGI WITH TOXIGENIC POTENTIAL ON SAMPLES OF FEED AND RAW MATERIALS FOR THEIR MANUFACTURE

Directory of Open Access Journals (Sweden)

Rodrigo Vera

2016-06-01

Full Text Available The presence and/or accumulation of mycotoxins in foods intended for human and animal nutrition is a constant concern for the harmful health effects resulting from ingestion. The aims of this communication were to analyze samples of feed and raw materials for manufacturing and to determine the presence of strains of filamentous fungi with toxigenic capacity. The values of frequency in the total samples (N = 422, indicated 63% of contamination, where A. flavus represented the most common (29.8%, while in feed and raw materials separately, indicated A. flavus has the highest value in both categories. In the analysis of different type of raw materials, A. flavus contaminated all types of samples, with the bran and soybean meal substrates having higher values for this Aspergillus, and corn substrate more fungal contamination. These results would demonstrate that the presence of mycobiota with toxigenic potential in food for animal feed is a disturbing reality.

Partial costs of global climate change adaptation for the supply of raw industrial and municipal water: a methodology and application

International Nuclear Information System (INIS)

Ward, Philip J; Pauw, W Pieter; Brander, Luke M; Aerts, Jeroen C J H; Strzepek, Kenneth M; Hughes, Gordon A

2010-01-01

Despite growing recognition of the importance of climate change adaptation, few global estimates of the costs involved are available for the water supply sector. We present a methodology for estimating partial global and regional adaptation costs for raw industrial and domestic water supply, for a limited number of adaptation strategies, and apply the method using results of two climate models. In this paper, adaptation costs are defined as those for providing enough raw water to meet future industrial and municipal water demand, based on country-level demand projections to 2050. We first estimate costs for a baseline scenario excluding climate change, and then additional climate change adaptation costs. Increased demand is assumed to be met through a combination of increased reservoir yield and alternative backstop measures. Under such controversial measures, we project global adaptation costs of $12 bn p.a., with 83-90% in developing countries; the highest costs are in Sub-Saharan Africa. Globally, adaptation costs are low compared to baseline costs ($73 bn p.a.), which supports the notion of mainstreaming climate change adaptation into broader policy aims. The method provides a tool for estimating broad costs at the global and regional scale; such information is of key importance in international negotiations.

Partial costs of global climate change adaptation for the supply of raw industrial and municipal water: a methodology and application

Energy Technology Data Exchange (ETDEWEB)

Ward, Philip J; Pauw, W Pieter; Brander, Luke M; Aerts, Jeroen C J H [Institute for Environmental Studies (IVM), VU University Amsterdam (Netherlands); Strzepek, Kenneth M [Joint Program on the Science and Policy of Global Change, Massachusetts Institute of Technology, MA (United States); Hughes, Gordon A, E-mail: philip.ward@ivm.vu.nl [School of Economics, University of Edinburgh (United Kingdom)

2010-10-15

Despite growing recognition of the importance of climate change adaptation, few global estimates of the costs involved are available for the water supply sector. We present a methodology for estimating partial global and regional adaptation costs for raw industrial and domestic water supply, for a limited number of adaptation strategies, and apply the method using results of two climate models. In this paper, adaptation costs are defined as those for providing enough raw water to meet future industrial and municipal water demand, based on country-level demand projections to 2050. We first estimate costs for a baseline scenario excluding climate change, and then additional climate change adaptation costs. Increased demand is assumed to be met through a combination of increased reservoir yield and alternative backstop measures. Under such controversial measures, we project global adaptation costs of $12 bn p.a., with 83-90% in developing countries; the highest costs are in Sub-Saharan Africa. Globally, adaptation costs are low compared to baseline costs ($73 bn p.a.), which supports the notion of mainstreaming climate change adaptation into broader policy aims. The method provides a tool for estimating broad costs at the global and regional scale; such information is of key importance in international negotiations.

Risks and benefits of compost-like materials prepared by the thermal treatment of raw scallop hepatopancreas for supplying cadmium and the growth of alfalfa (Medicago sativa L.).

Science.gov (United States)

Ushijima, Kensuke; Fukushima, Masami; Kanno, Shinya; Kanno, Itoko; Ohnishi, Mitsuhiro

2016-01-01

Scallop hepatopancreas, fishery waste, contains relatively high levels of Cd and organic nitrogen compounds, the latter of which represent a fertilizer. In this study, raw scallop hepatopancreas tissue was thermally treated with sawdust and red loam in the presence of an iron catalyst to produce compost-like materials (CLMs). Two CLM samples were prepared by varying the content of raw scallop hepatopancreas tissue: 46 wt.% for CLM-1 and 18 wt.% for CLM-2. Mixtures of control soil (CTL) and CLMs (CLM content: 10 and 25 wt.%) were examined for the growth of alfalfa (Medicago sativa L.) to evaluate the risks and benefits of using this material for fertilization. The Cd content in shoots and roots of alfalfa, that were grown in the presence of CLMs, was significantly higher than those for the plants grown in the CTL, indicating that Cd had accumulated in the plants from CLMs. The accumulation of Cd in the alfalfa roots was quite high in the case of the 25% CLM-1 sample. However, alfalfa growth was significantly promoted in the presence of 10% CLM-1. This can be attributed to the higher levels of nitrogen and humic substances, which serve as fertilizer components. Although the fertilization effect in case of CLM-1showed a potential benefit, the accumulation of Cd in alfalfa was clearly increased in the presence of both CLMs. In conclusion, the use of CLMs produced from raw scallop hepatopancreas tissue can be considered to have a desirable benefit from standpoint of its use as fertilizer, but is accompanied by a risk of the accumulation of Cd in alfalfa plants.

A Development Strategy for Creating a Suite of Reference Materials for the in-situ Microanalysis of Non-conventional Raw Materials

Science.gov (United States)

Renno, A. D.; Merchel, S.; Michalak, P. P.; Munnik, F.; Wiedenbeck, M.

2010-12-01

Recent economic trends regarding the supply of rare metals readily justify scientific research into non-conventional raw materials, where a particular need is a better understanding of the relationship between mineralogy, microstructure and the distribution of key metals within ore deposits (geometallurgy). Achieving these goals will require an extensive usage of in-situ microanalytical techniques capable of spatially resolving material heterogeneities which can be key for understanding better resource utilization. The availability of certified reference materials (CRMs) is an essential prerequisite for (1) validating new analytical methods, (2) demonstrating data quality to the contracting authorities, (3) supporting method development and instrument calibration, and (4) establishing traceability between new analytical approaches and existing data sets. This need has led to the granting of funding by the European Union and the German Free State of Saxony for a program to develop such reference materials . This effort will apply the following strategies during the selection of the phases: (1) will use exclusively synthetic minerals, thereby providing large volumes of homogeneous starting material. (2) will focus on matrices which are capable of incorporating many ‘important’ elements while avoid exotic compositions which would not be optimal matrix matches. (3) will emphasise those phases which remain stable during the various microanalytical procedure. This initiative will assess the homogeneity of the reference materials at sampling sizes ranging between 50 and 1 µm; it is also intended to document crystal structural homogeneity too, as this too may potentially impact specific analytical methods. As far as possible both definitive methods as well as methods involving matrix corrections will be used for determining the compositions of the of the individual materials. A critical challenge will be the validation of the determination of analytes concentrations

Effects and detection of raw material variability on the performance of near-infrared calibration models for pharmaceutical products.

Science.gov (United States)

Igne, Benoit; Shi, Zhenqi; Drennen, James K; Anderson, Carl A

2014-02-01

The impact of raw material variability on the prediction ability of a near-infrared calibration model was studied. Calibrations, developed from a quaternary mixture design comprising theophylline anhydrous, lactose monohydrate, microcrystalline cellulose, and soluble starch, were challenged by intentional variation of raw material properties. A design with two theophylline physical forms, three lactose particle sizes, and two starch manufacturers was created to test model robustness. Further challenges to the models were accomplished through environmental conditions. Along with full-spectrum partial least squares (PLS) modeling, variable selection by dynamic backward PLS and genetic algorithms was utilized in an effort to mitigate the effects of raw material variability. In addition to evaluating models based on their prediction statistics, prediction residuals were analyzed by analyses of variance and model diagnostics (Hotelling's T(2) and Q residuals). Full-spectrum models were significantly affected by lactose particle size. Models developed by selecting variables gave lower prediction errors and proved to be a good approach to limit the effect of changing raw material characteristics. Hotelling's T(2) and Q residuals provided valuable information that was not detectable when studying only prediction trends. Diagnostic statistics were demonstrated to be critical in the appropriate interpretation of the prediction of quality parameters. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

Hydrolysis technology for producing sugars from biomass as raw material for the chemical industry - SugarTech

Energy Technology Data Exchange (ETDEWEB)

Siika-aho, M.; Kallioinen, A.; Pakula, T. (and others) (VTT Technical Research Centre of Finland, Espoo (Finland)), email: matti.siika-aho@vtt.fi

2009-10-15

In SugarTech project, spruce, forest residue, birch and sugar cane bagasse have been studied as a raw material for production of sugars to be processed further to ethanol and other chemicals. These raw materials containing high proportion of carbohydrates have been analysed and pretreated for enzyme hydrolysis by steam explosion and oxidative methods. The pretreated materials have been studied in respect to yield and enzymatic hydrolysability. Birch and bagasse could easily be pretreated with steam explosion. Catalytic oxidation treatment of spruce produced material with superior hydrolysability to steam exploded material. Enzyme adsorption and desorption were studied aiming at recycling of enzymes in the hydrolysis process. Purified cellulase enzymes were found to have high tendency to adsorption on lignocellulosic substrate. Adsorption could be decreased by additives, e.g. urea and BSA. In addition, the hydrolytic system of Trichoderma reesei in the presence of different substrates has been studied. (orig.)

Physicochemical characterization of raw materials and co-products from the titanium dioxide industry

International Nuclear Information System (INIS)

Gazquez, M.J.; Bolivar, J.P.; Garcia-Tenorio, R.; Vaca, F.

2009-01-01

The present study was conducted to characterize several raw materials and co-products from the titanium dioxide industry in relation to their elemental composition (major, minor and trace elements), granulometry, mineralogy, microscopic morphology and physical composition. The main objective was to gain basic information for the future potential application of these co-products in fields such as agriculture, construction, civil engineering, etc. Microscopic studies were performed by applying scanning electron microscopy with X-ray microanalysis (SEM-XRMA) while the mineralogical compositions were analysed by means of the X-ray diffraction (XRD) technique. The concentrations of major elements such as Na, Al, Si, Ca, Ti, Fe, S and K were determined by X-ray fluorescence (XRF), while heavy metals and other trace elements were determined by ICP-MS. The physicochemical characterization of the raw materials used in the titanium dioxide industry, in addition to the characterization of the co-products generated, has enabled the evaluation of the degree of fractionation of different elements and compounds between the different co-products, as well as the control of the possible variations in the physicochemical composition of the raw materials throughout the time and the study of the influence of these variations in the characteristics of the obtained co-products. As a main conclusion of our study, it is possible to indicate that the levels of the pollutant elements associated to the co-products analysed were, in general, within safe limits and, therefore, they could potentially be used in composites as fertilizers or for building materials in road construction, etc. Nevertheless, for the specific application of each of these co-products in agriculture, construction and civil engineering, additional studies need to be performed to evaluate their appropriateness for the proposed application, together with specific studies on their health and environmental impact.

Raw materials evaluation and process development studies for conversion of biomass to sugars and ethanol

Energy Technology Data Exchange (ETDEWEB)

Wilke, C.R.; Yang, R.D.; Sciamanna, A.S.; Freitas, R.P.

1978-06-01

A range of cellulosic raw materials in the form of agricultural crop residue was analyzed for chemical composition and assessed for potential yields of sugars through chemical pretreatment and enzymatic hydrolysis of these materials. Corn stover was used as a representative raw material for a preliminary process design and economic assessment of the production of sugars and ethanol. With the process as presently developed, 23 gallons of ethanol can be obtained per ton of corn stover at a processing cost of about $1.80 per gallon exclusive of by-product credits. The analysis shows the cost of ethanol to be highly dependent upon (1) the cost of the biomass, (2) the extent of conversion to glucose, (3) enzyme recovery and production cost and (4) potential utilization of xylose. Significant cost reduction appears possible through further research in these directions.

Annual report 1997. Energies and raw materials; Rapport annuel 1997. Energies et matieres premieres

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

This report gives the important directions of French energy policy. Nuclear energy, electric power, natural gas, coal and petroleum products are reviewed. The situations and the forecasting for raw materials are also given. (N.C.)

Influence of stabilizer on the environment and their use as possible secondary raw material

International Nuclear Information System (INIS)

Jelenova, M.

2001-01-01

In this paper author deals with the environmental impact of coal combustion in coal fired power plants and with influence of ash and stabilizer on the environment and their use as possible secondary raw material

Annual report 1997. Energies and raw materials; Rapport annuel 1997. Energies et matieres premieres

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

This report gives the important directions of French energy policy. Nuclear energy, electric power, natural gas, coal and petroleum products are reviewed. The situations and the forecasting for raw materials are also given. (N.C.)

OZONE ABSORPTION IN RAW WATERS

Directory of Open Access Journals (Sweden)

LJILJANA TAKIĆ

2008-03-01

Full Text Available The ozone absorption in raw water entering the main ozonization step at the Belgrade drinking water supply plant was investigated in a continuous stirred tank reactor (CSTR. A slow chemical reaction rate of dissolved ozone and pollutants present in raw water have been experimentally determined. The modified Hatta number was defined and calculated as a criterion which determines whether and to which extent the reactions of ozone and pollutants influence the rate of the pure physical ozone absorption.

Natural stone muds as secondary raw materials: towards a new sustainable recovery process

Science.gov (United States)

Zichella, Lorena; Tori, Alice; Bellopede, Rossana; Marini, Paola

2016-04-01

The production of residual sludge is a topical issue, and has become essential to recover and reuse the materials, both for the economics and the environmental aspect. According to environmental EU Directives, in fact ,the stone cutting and processing should characterized by following objectives, targets and actions: the reduction of waste generated, the decreasing of use of critical raw material, the zero landfilling of sludge and decreasing in potential soil contamination, the prevention of transport of dangerous waste, the reduction of energy consumption, the zero impact on air pollution and the cost reduction . There are many industrial sector in which residual sludge have high concentrations of metals and/or elements deemed harmful and therefore hazardous waste. An important goal, for all industrial sectors, is an increase in productivity and a parallel reduction in costs. The research leads to the development of solutions with an always reduced environmental impact. The possibility to decrease the amount of required raw materials and at the same time the reduction in the amount of waste has become the aim for any industrial reality. From literature there are different approaches for the recovery of raw and secondary materials, and are often used for the purpose chemical products that separate the elements constituting the mud but at the same time make additional pollutants. The aim of the study is to find solutions that are environmentally sustainable for both industries and citizens. The present study is focused on three different Piedmont rocks: Luserna, Diorite from Traversella and Diorite from Vico, processed with three different stone machining technologies: cutting with diamond wire in quarry (blocks), in sawmill (slabs) and surface polishing. The steps are: chemical analysis, particle size analysis and mineralogical composition and characterization of the sludge obtained from the various machining operations for the recovery of the metal material by

Significance of Supply Logistics in Big Cities

Directory of Open Access Journals (Sweden)

Mario Šafran

2012-10-01

Full Text Available The paper considers the concept and importance of supplylogistics as element in improving storage, supply and transportof goods in big cities. There is always room for improvements inthis segmenl of economic activities, and therefore continuousoptimisation of the cargo flows from the manufacturer to theend user is impor1a11t. Due to complex requirements in thecargo supply a11d the "spoiled" end users, modem cities represe/ll great difficulties and a big challenge for the supply organisers.The consumers' needs in big cities have developed over therecent years i11 such a way that they require supply of goods severaltimes a day at precisely determined times (orders are receivedby e-mail, and the information transfer is therefore instantaneous.In order to successfully meet the consumers'needs in advanced economic systems, advanced methods ofgoods supply have been developed and improved, such as 'justin time'; ''door-to-door", and "desk-to-desk". Regular operationof these systems requires supply logistics 1vhiclz includes thetotalthroughpw of materials, from receiving the raw materialsor reproduction material to the delive1y of final products to theend users.

Utilization of raw material from early thinnings; Ensiharvennuspuun hyoedyntaeminen

Energy Technology Data Exchange (ETDEWEB)

Alen, R; Marttina, M; Toivanen, J [Jyvaeskylae Univ. (Finland). Dept. of Chemistry

1997-12-01

Wood material from early thinnings is one of the most potential new material reserves (4 - 6 million m{sup 3}) for industrial purposes. However, the prerequisites for an enhanced utilisation of this reserve would be, besides more efficient logging, debarking, and chipping, an optimal fractionation of wood material into energy and fibre production. The aim of this project was to promote the use of first-thinning wood as a competitive raw material for energy production by increasing the potential utilisation of the corresponding wood resource for chemical pulping. During the year 1996 the variation of fibre length distribution within the stem and top (total height of 12 m) of a 27-years-old pine wood (Pinus sylvestris) was determined. Tentative calculations indicated that about 67 % of the wood dry matter consists of fibres having an average fibre length more than 2 mm. It was considered that most of this fraction with high quality fibre properties could be recovered and used for pulping. In addition, the detailed FTIR analysis of different samples from the same pine wood showed that there was an adequate correlation between the FTIR spectrometric data and the fibre length averages. (orig.)

New raw materials improve packing sealing efficiency

International Nuclear Information System (INIS)

Igel, B.; McKeague, L.

2012-01-01

End-users and OEM's using or manufacturing on/off and control valves expect a permanent and effective increase in service life together with an increased sealing capability while at the same time minimizing maintenance concerns. Developing materials which provide consistency and repeatability are essential characteristics to optimizing valve performance. “New Generation” materials and yarn allow us to meet this growing demand while complying with the requirements related to chemical purity and an increased level of safety to both plant workers and equipment in the nuclear environment. Through R&D initiatives and developments in new and improved raw materials; a new mechanical packing generation which optimizes friction coefficients and extended life cycle has been introduced to the industry. Lower friction values drastically optimize actuator effort and size improving efficiency for stem operation with significant improvements in flow control of fluids. Combined with new and improved procedures (installation, torque levels and consolidation recommendations), this new packing generation has provided significant improvement in the mechanical behavior of packing materials (independent tests carried out in collaboration with AECL and CETIM) this has provided the opportunity to develop successful Valve Enhancement Programs which offer improved efficiency, valve operation and repeatability. These NEW generation yarns are available with or without wire reinforcement depending on specific operating parameters and conditions. The purpose of this presentation is to demonstrate that new generation material(s). Which are available to the industry for AOV, MOV and Manual valves? - To highlight the steps taken in R&D and manufacturing contributing to the much improved yarns and finished packing products. - Comply and are designed to meet the stringent requirements in the nuclear industry - Simplify valve maintenance without risk to safety or performance - Increase service

Self-compacting paste system using secondary raw materials

International Nuclear Information System (INIS)

Rizwan, S.A.

2008-01-01

A study has been carried out on self-compacting paste (SCP) systems using various cements and secondary raw materials (SRM's) including rice husk ash (RHA) and Silica Fume (SF). These systems were characterized by: SRM particle size, powder water demand (WD) and setting times, flow, strength, microstructure and early volume stability. The result show that WD increased by adding SRM's due to their smaller particle size, higher surface area and internal porosity. Inclusion of SRM's in SCP systems as cement replacements also increase strength of SCP systems due to filler, hydration and pozzolanic actions which translate into pore refinement. It is demonstrated that the resultant properties of self-compacting cementitious. System (SCCS) depend upon the nature of SRM used. (author)

Cross-laminated timber made of Hungarian raw materials

Science.gov (United States)

Marko, G.; Bejo, L.; Takats, P.

2016-04-01

Cross-laminated timber (CLT), generally made out of softwood, enjoys increasing popularity throughout Europe. This material offers a versatile, eco-friendly technology to create strong, lightweight and energy-efficient buildings. Unfortunately, the sites and climatic conditions in Hungary are not suitable for growing high-quality coniferous trees. Transporting raw materials from other countries (sometimes thousands of kilometres away) negates the environmental advantages of wood-based construction. Local options are definitely preferable from an ecological aspect. Poplar wood (populus spp.) is of great economic importance in Hungary. There are several relatively high density, high strength varieties growing in large quantities in Hungary, that may be used as alternatives to softwood, with comparable properties. There is an increasing interest in using poplar as a construction material, especially in regions were there is a shortage of traditional construction timber. This paper presents the results of a preliminary investigation to create CLT using poplar lumber. Laboratory-scale CLT specimens were created in a hot press, and tested for their loadbearing capacity. The MOR values of poplar CLT are comparable to, albeit somewhat lowerthan those of softwood CLT. Further investigations are required to establish the economic viability and technological conditions for the commercial production of poplar CLT.

Indicators for the use of raw materials in the context of sustainable development in Germany; Indikatoren/Kennzahlen fuer den Rohstoffverbrauch im Rahmen der Nachhaltigkeitsdiskussion

Energy Technology Data Exchange (ETDEWEB)

Giegrich, Juergen; Liebich, Axel; Lauwigi, Christoph; Reinhardt, Joachim [ifeu-Institut fuer Energie- und Umweltforschung GmbH, Heidelberg (Germany)

2012-01-15

Raw material productivity is a key indicator in the German strategy for sustainable development located in the chapter about ''conservation of resources''. Raw material productivity relates the gross domestic product (GDP) to the sum of domestically extracted abiotic raw materials and imported abiotic raw materials, semi-finished products and finished products. The main objective of this research project was to further develop or supplement this existing indicator. First of all the basic concepts of ''natural resource'' and ''raw material'' was clearly defined and put into the context of existing resource strategies. The broad concept of natural resource was adopted and six types of natural resources were identified (raw material, energy, water, land, biodiversity and the sink function of environmental media) Headline indicators were suggested for each of them. An aggregated indicator was developed and discussed which was called Environmental Impact Load (EVIL). The pressures represented by four resource indicators and four environmental indicators for the sink function were calculated for all imported goods with the help of 130 resource and environmental profiles and the German import statistics of the year 2005. This step was necessary to resolve the asymmetric approach of calculating the pressures caused by imports and domestic production and consumption. The ''rucksacks'' of the imports were accounted with domestic figures and the export ''rucksacks''. The raw material demand of imported goods expressed in raw material equivalent was derived to be twice as high as the domestic material extraction. Finally the function of the different resource indicators to represent each other was tested with the help of correlations. As a first approximation a certain correlation exists between some indicators. But it is recommended that each resource indicator should be kept

Energy and raw material potentials of wood residue in the Pacific Coast States: a summary of a preliminary feasibility investigation.

Science.gov (United States)

John B. Grantham; Eldon Estep; John M. Pierovich; Harold Tarkow; Thomas C. Adams

1974-01-01

Results are reported of a preliminary investigation of feasibility of using wood residue to meet energy and raw material needs in the Pacific Coast States. Magnitude of needs was examined and volume of logging-residue and unused mill residue was estimated. Costs of obtaining and preprocessing logging residue for energy and pulp and particle board raw material were...

Analisis Mitigasi Risiko Supply Chain Bahan Baku Crumb Rubber Pada PT. Bakrie Sumatera Plantations Tbk

OpenAIRE

Khairunnisa

2017-01-01

120403126 Supply chain activities always have the potential to arise the risk, there fore, risk management is indispensable for the management of risk. On the company Bakrie Sumatra, PT Pantations Tbk, in the raw material supply chain activity crumb rubber has the opportunity for incorrect valuation of risks such as occurred to suppliers of materials, late delivery, as well as the constraints that occur inside itself. Therefore, the need for risk analysis and mitigation action handling to ...

Assessing raw materials for carbon black production using 1H- and 13C-nuclear magnetic resonance

International Nuclear Information System (INIS)

Bekarek, V.; Meic, Z.

1980-01-01

1 H and 13 C NMR spectroscopy in combination with elemental analysis and/or infrared spetroscopy were used in evaluating raw materials for the preparation of carbon black. Three models and seven industrial mixtures were analysed. The evaluation of experimental results by the Brown-Ladner method yielded information on the basic chemical characteristics of the raw material, ie., the contents of carbon and other elements, the contents of aromatic and aliphatic components and the nature of the aromatic compounds present. The obtained results are in good agreement with theoretical results for the model mixtures and with results of gas chromatography for the industrial mixtures

Study of the incorporation of marble and granite wastes in the raw material to produce glass wool

International Nuclear Information System (INIS)

Rodrigues, Girley Ferreira; Junca, Eduardo; Telles, Victor Bridi; Espinosa, Denise Crocce Romano; Tenorio, Jorge Alberto Soares; Alves, Joner Oliveira

2010-01-01

The study aimed to characterize materials obtained from the melted mixture containing marble and granite wastes, and also chemical reagents. Using the characterization results was defined the feasibility of reuse of the marble and granite wastes, through the incorporation in the raw material to produce glass wool (a material with great consumer market as thermo-acoustic insulator). The batch was poured in a water-filled recipient and also in a Herty viscometer at temperatures of 1400, 1450 and 1500 °C. Samples of produced materials were characterized by morphology using Scanning Electron Microscopy, by atomic structure using X-ray Diffraction, and by thermal behavior using Differential Thermal Analysis. The total amount of marble and granite wastes can reach about 79% replacement in relation to the total weight of the raw material used in the glass wool production. (author)

NAA study on characteristics and sources of raw materials of celadon bodies from Qingliangsi kiln and Zhanggongxiang kiln

International Nuclear Information System (INIS)

Wu Zhanjun; Zhao Weijuan; Lu Xiaoke; Li Guoxia; Guo Min; Xie Jianzhong; Qiu Xia; Feng Songlin

2007-01-01

Thirty-seven samples of ancient Chinese Ru porcelain bodies unearthed from Qingliangsi kiln (containing 32 Ru official porcelain bodies and 5 Ru folk porcelain bodies), thirty-two samples of ancient celadon bodies from Zhanggongxiang kiln, and fourteen samples of modern mineral, were selected and analyzed by neutron activation analysis (NAA) method. Twenty-three elements were measured. The data of these elemental contents were processed by scatter analysis and principle component analysis methods in order to determine the characteristics and sources of the raw materials of the celadon porcelain bodies from the foregoing two kilns. The results show that Fe, Ce, Ba, Ta, Th, La, Sm and Cr are the fingerprint elements to distinguish the ancient Ru official porcelain bodies from ancient celadon bodies of Zhanggongxiang kiln. The sources of the raw material of the ancient Ru official porcelain bodies from Qingliangsi kiln are more concentrated and stable than those from Zhanggongxiang kiln. The Ru folk porcelain bodies and the Ru official porcelain bodies from Qingliangsi kiln have the same provenance, both sources of which are local. The raw material origins of the ancient celadon bodies from Zhanggongxiang kiln is a little dispersed and the compositions of the raw material are different from the Ru porcelains, but the distance is not far away from each other. (authors)

Mining Pribram in science and technology. Proceedings of Session U - Mineral raw materials treatment

International Nuclear Information System (INIS)

Tomasek, J.; Vetejska, K.

1987-01-01

The proceedings of session ''Mineral raw materials treatment'' contain 27 papers of which only one deals with the application of nuclear technology, namely, the effect of fast electrons on the magnetic properties of the polymetallic Rudniany ore. (J.B.)

Status of food and raw milk supply and problem just after the reactor accident

International Nuclear Information System (INIS)

Hirakawa, Sachiko; Murakami, Kana; Yoshizawa, Nobuaki; Takizawa, Mari; Kawai, Masaki; Sato, Osamu; Takagi, Syunji; Nakamura, Takashi

2014-01-01

Iodine 131 was detected in the environment and the food such as vegetables, raw milk and tap water just after the reactor accident following the East Japan Great Earthquake occurred in March 11, 2011. This article investigated status of refuge of Fukushima residents, their dietary life and food distribution from March 11 to 31 just after the accident so as to reevaluate internal exposure dose with Iodine 131. Investigation results showed most of food taken by refugees was confirmed food stock or relief supplies outside from the disaster area and suggested food contaminated with Iodine 131 was not widely consumed and distributed due to limit to send designated vegetables, restriction of tap water intake, damaged distribution facilities and closing down of retail stores. Restriction of tap water intake was only applied partly, so this might cause internal exposure dose due to tap water. (T. Tanaka)

Effects of gamma irradiation on raw materials and perfumes

International Nuclear Information System (INIS)

Guillot, M.; Pelpel, A.

1983-01-01

In order to enlight the strange problem of apparent perfume stability observed in manufactured talc powders sterilized by gamma rays, investigations were made on samples of odorant substances (raw materials, essential oils, or elaborated mixtures). As a rule, no immediate adulteration of olfactive caracteristics resulted at once from gamma irradiation. In several cases, a stabilizing effect appeared immediately and remained effective after long storage in various conditions (of temperature, or light, or oxygen exposure). This unexpected effect seems to be in accordance with previous experiments on gamma or electron irradiations of mixtures of organic molecules, reported in litterature: a mutual inhibition was observed to take place [fr

Raw materials for advanced ceramics: rare earths separation processes

International Nuclear Information System (INIS)

Ricci, D.R.; Nobre, J.S.M.; Paschoal, J.O.A.

1990-01-01

The importance of obtaining purified rare earths oxidesis related, mainly to the increasing use of these compounds as raw materials for advanced ceramics. Processes of rare earths separation and purification are almost always based on the solvent extraction, fractional precipitation and ion exchange chromatography techniques, whose association depends on the initial concentrate and on the desired purity. This paper describes some steps of fractionation of didymium carbonate by using the solvent extraction and fractional precipitation techniques. The experimental conditions presented here have enable the production of lantanium, neodimium - praseodimium, samarium - gadolinium and ytrium concentrates, which constitute the intermediate fractions of the overall process to obtain high purity rare earths. (author) [pt

Instructional Aids, Materials, and Supplies--Guidelines.

Science.gov (United States)

Education Development Center, Inc., Newton, MA.

This resource guide produced for the Follow Through Program, primarily lists instructional aids and supplies; it also suggests practical implications for provisioning the classroom environment, gives specific suggestions for Project Follow Through directors, and lists addresses of suppliers. The materials are divided into nine categories, which…

Problems of metrological supply of carbon materials production

International Nuclear Information System (INIS)

Belov, G.V.; Bazilevskij, L.P.; Cherkashina, N.V.

1989-01-01

Carbon materials and products contain internal residual stresses and have an anisotropy of properties therefore special methods of tests are required to control their quality. The main metrological problems during development, production and application of carbon products are: metrological supply of production forms and records during the development of production conditions; metrological supply of quality control of the product; metrological supply of methods for the tests of products and the methods to forecast the characteristics of product quality for the period of quaranteed service life

Melting behaviour of raw materials and recycled stone wool waste

DEFF Research Database (Denmark)

Schultz-Falk, Vickie; Agersted, Karsten; Jensen, Peter Arendt

2018-01-01

Stone wool is a widely used material for building insulation, to provide thermal comfort along with fire stability and acoustic comfort for all types of buildings. Stone wool waste generated either during production or during renovation or demolition of buildings can be recycled back into the sto...... wool melt production. This study investigates and compares the thermal response and melting behaviour of a conventional stone wool charge and stone wool waste. The study combines differential scanning calorimetry (DSC), hot stage microscopy (HSM) and X-ray diffraction (XRD). DSC reveals...... that the conventional charge and stone wool waste have fundamentally different thermal responses, where the charge experiences gas release, phase transition and melting of the individual raw materials. The stone wool waste experiences glass transition, crystallization and finally melting. Both DSC and HSM measurements...

On the increasing multifunctionality of agricultural raw materials: three dilemmas for innovation and adoption

NARCIS (Netherlands)

Boehlje, M.; Bröring, S.

2010-01-01

The agricultural sector is increasingly becoming multifunctional. It is the entry point of several value chains. Agricultural raw materials are increasingly being used for multiple industries or sectors beyond the traditional fiber and nutrition industries—energy in the form of ethanol and

Process Modeling, Performance Analysis and Configuration Simulation in Integrated Supply Chain Network Design

OpenAIRE

Dong, Ming

2001-01-01

Supply chain management has been recently introduced to address the integration of organizational functions ranging from the ordering and receipt of raw materials throughout the manufacturing processes, to the distribution and delivery of products to the customer. Its application demonstrates that this idea enables organizations to achieve higher quality products, better customer service, and lower inventory cost. In order to achieve high performance, supply chain functions must operate ...

Characterization of raw materials and manufactured binderless particleboard from oil palm biomass

International Nuclear Information System (INIS)

Hashim, Rokiah; Nadhari, Wan Noor Aidawati Wan; Sulaiman, Othman; Kawamura, Fumio; Hiziroglu, Salim; Sato, Masatoshi; Sugimoto, Tomoko; Seng, Tay Guan; Tanaka, Ryohei

2011-01-01

The objective of this study was to examine the extractive, holocellulose, alpha cellulose, lignin, starch, and sugar contents of oil palm biomass and to evaluate its suitability in binderless particleboard production. In this study, bark, leaves, fronds, mid-parts and core-parts of the trunks were used to produce experimental binderless particleboard panels. Binderless particleboard panels were made with a target density of 0.80 g/cm 3 at a temperature of 180 o C and a pressure of 12 MPa in a computer controlled hot press. The modulus of rupture, the internal bond strength, the thickness swelling and the water absorption of the panels were evaluated. Fourier transform infrared spectroscopy and field emission scanning electron microscopy were used to characterize the properties of the raw materials and the manufactured panels. The chemical composition of the oil palm biomass consisted of high holocellulose, lignin, starch and sugar contents that have been found to aid in the production of binderless particleboard. The core-part of the trunk contained the highest amount of starch and total sugar. Samples made from the core-parts and fronds had sufficient modulus of rupture and internal bond strength to meet the Japanese Industrial Standard. The internal bond strength of the mid-part panels also met the standard. However, binderless board prepared from bark and leaves showed poor modulus of rupture and internal bond strength. Samples from the core-parts had the lowest thickness swell and water absorption but did not meet the above standard. The Fourier transform infrared spectroscopy spectra did not show any substantial difference between the raw materials and the manufactured panels. Field emission scanning electron microscopy indicated that the compressed cells varied between raw material types and showed the presence of compressed cells with some starch granules that facilitated adhesion. Based on the findings of this study, oil palm has the potential to be used to

Nutritional Evaluation of Raw Materials Entering the Structure to Mixed Fodder for the Specie Poecilia reticulata (Guppy

Directory of Open Access Journals (Sweden)

Adrian Gruber

2011-05-01

Full Text Available In the ornamental pisciculture is a especial emphasis on the exterior shape and color to the fishes, issues that are dependent directly to the structure of compound feeds in relation to the nutritional characteristics of the raw materials.Own research or focused on analyzing the crude chemical composition with Weende scheme (water content and dry matter, crude ash, crude protein, crude fat, crude fiber, SEN of raw materials can be used in the structure of a compound feeds for the Poecilia reticulata (guppy species, for most of these materials there are no current data in the literature.These materials were analyzed: gelatin, wheat flour, sunflower meal, soybean meal, meal Spirulina platensis, carrot (Daucus carota, Pangasius fillet, Daphnia pulex, grount dandelion (Taraxacum officinale, grount nettle (Urtica dioica and yeast.

Hydrolysis technology for producing sugars from biomass as raw material for the chemical industry - SugarTech

Energy Technology Data Exchange (ETDEWEB)

Kallioinen, A.; Haekkinen, M.; Pakula, T. (and others) (VTT Technical Research Centre of Finland, Espoo (Finland)), Email: anne.kallioinen@vtt.fi

2010-10-15

In SugarTech project, spruce, forest residue, birch and sugar cane bagasse have been studied as a raw material for production of sugars to be processed further to ethanol and other chemicals. These raw materials containing high proportion of carbohydrates have been analysed and pretreated for enzyme hydrolysis by steam explosion and oxidative methods. The pretreated materials have been studied in respect to yield and enzymatic hydrolysability. Birch and bagasse could easily be pretreated with steam explosion. Catalytic and alkaline oxidation treatment of spruce produced material with superior hydrolysability to steam exploded material. Enzyme adsorption and desorption were studied with lignocellulosic substrates aiming at recycling of enzymes in the hydrolysis process. After enzymatic hydrolysis, a major part of the enzymes remained bound to substrate in spite of high degree of hydrolysis. Desorption of enzymes could be detected only with catalytically oxidised spruce. In addition, the hydrolytic system of Trichoderma reesei, which is a widely used fungus for cellulase enzyme production, has been studied in the presence of different substrates. The substrate and the pretreatment method had clear effects on gene expression profile. (orig.)

Raw-materials mixtures from waste of the coal industry for production of ceramic materials

Energy Technology Data Exchange (ETDEWEB)

Galpern, E I [Scientific-Manufacturing Enterprise ` ` Ceramics` ` , Donetsk (Ukraine); Pashchenko, L V [Inst. of Physical, Organic and Coal Chemistry of NASU, Donetsk (Ukraine)

1998-09-01

The liquidation of waste dumps on the surface of mining enterprises and realization of measures by environment protection of air and aquatic basins are connected to the complex processing of mining mass. The main directions of utilization of mining rocks and coal wastes realized in Ukraine industry are: - filling of mines worked-out area by grouting solutions; - ceramic brick, porous filling materials and binding materials production; - road-making, construction of hydrostructures and industrial objects; - output of concrete items predominantly for using in mining conditions. The peculiarity of wastes using in above-mentioned fields is the possibility of their mass application in quantities commensurable with valumes of their yields. The experience of enterprises work which process mining rocks into building materials by burning method (ceramic brick, porous aggregates of concretes as aggloporite, expanded clay aggregate) has shown that unconstant and, as the rule, exceeding norms content of carbon and sulphur in the rock results to deterioration of products quality and technological factors of production. Unstability of carbon content in raw material makes the burning process hardly operated. Obtained products having residual carbon in the view of coke residue are often characterized by lower physical-mechanical characteristics. (orig./SR)

E-PROCUREMENT AS AN INSTRUMENT FOR HOTEL SUPPLY CHAIN MANAGEMENT

OpenAIRE

Lidija Pulevska IVANOVSKA

2007-01-01

The flow of goods, services, and information in the hotel industry, should be designed in a way that enables efficient transformation of raw materials into finished products or services with values. Procurement technology plays a vital role in the hotel business, because hotels usually purchase a large quantity of supplies for maintaining daily operations and quality. Today, a major goal of a hotel’s supply chain management is to efficiently apply information technology to its procurement sys...

Aluminium content of some processed foods, raw materials and food additives in China by inductively coupled plasma-mass spectrometry.

Science.gov (United States)

Deng, Gui-Fang; Li, Ke; Ma, Jing; Liu, Fen; Dai, Jing-Jing; Li, Hua-Bin

2011-01-01

The level of aluminium in 178 processed food samples from Shenzhen city in China was evaluated using inductively coupled plasma-mass spectrometry. Some processed foods contained a concentration of up to 1226 mg/kg, which is about 12 times the Chinese food standard. To establish the main source in these foods, Al levels in the raw materials were determined. However, aluminium concentrations in raw materials were low (0.10-451.5 mg/kg). Therefore, aluminium levels in food additives used in these foods was determined and it was found that some food additives contained a high concentration of aluminium (0.005-57.4 g/kg). The results suggested that, in the interest of public health, food additives containing high concentrations of aluminium should be replaced by those containing less. This study has provided new information on aluminium levels in Chinese processed foods, raw materials and a selection of food additives.

Raw material boom in an industrial country. Rohstoffboom in einem Industrieland

Energy Technology Data Exchange (ETDEWEB)

Enders, K S

1984-01-01

First of all, a theoretical investigation is carried out to discover under which conditions a raw material boom displaces traditional sectors of industry, and which groups win and lose in the process. Subsequently, the peculiarities of the adaption process induced by the boom are analysed. Particular attention is paid to the possibility of transition (short-term) unemployment (Dutch disease). In conclusion, Norway's experiences in the oil and gas boom in the North Sea ar described and then compared with theoretical statements.

Alignment of global supply networks based on strategic groups of supply chains

Directory of Open Access Journals (Sweden)

Nikos G. Moraitakis

2017-09-01

Full Text Available Background: From a supply chain perspective, often big differences exist between global raw material suppliers’ approaches to supply their respective local markets. The progressing complexity of large centrally managed global supply networks and their often-unknown upstream ramifications increase the likelihood of undetected bottlenecks and inefficiencies. It is therefore necessary to develop an approach to strategically master the upstream complexity of such networks from a holistic supply chain perspective in order to align regional competitive priorities and supply chain structures. The objective of this research is hence to develop an approach for the supply-chain-based alignment of complex global supply networks. Method: We review existing literature from the fields of supply chain and network management, strategic sourcing, and strategic management. Based on the literature review and theoretical and practical considerations we deduce a conceptual approach to consider upstream supply chain structures in supply network alignment initiatives. Results: On the basis of these considerations and current empirical literature we transfer strategic group theory to the supply network management context. The proposed approach introduces strategic groups of supply chains as a segmentation criterion for complex global supply networks which enables the network-wide alignment of competitive priorities. Conclusion: Supply-chain-based segmentation of global supply network structures can effectively reduce the complexity, firms face when aiming to strategically align their supply chains on a holistic level. The results of this research are applicable for certain types of global supply networks and can be used for network alignment and strategy development. The approach can furthermore generate insights useable for negotiation support with suppliers.

Uncertainty analysis in raw material and utility cost of biorefinery synthesis and design

DEFF Research Database (Denmark)

Cheali, Peam; Quaglia, Alberto; Gernaey, Krist

2014-01-01

are characterized by considerable uncertainty. These uncertainties might have significant impact on the results of the design problem, and therefore need to be carefully evaluated and managed, in order to generate candidates for robust design. In this contribution, we study the effect of data uncertainty (raw...... material price and utility cost) on the design of a biorefinery process network....

OPTICAL-ELECTRONIC SYSTEM FOR EXPRESS ANALYSIS OF ORE DRESSABILITY FOR MINERAL RAW MATERIALS BY OPTICAL METHOD

Directory of Open Access Journals (Sweden)

A. A. Alekhin

2013-05-01

Full Text Available The article deals with creation results of experimental prototype of optical-electronic complex, designed to assess ore dressability of mineral raw materials by optical sorting method.

The technological raw material heating furnaces operation efficiency improving issue

Science.gov (United States)

Paramonov, A. M.

2017-08-01

The issue of fuel oil applying efficiency improving in the technological raw material heating furnaces by means of its combustion intensification is considered in the paper. The technical and economic optimization problem of the fuel oil heating before combustion is solved. The fuel oil heating optimal temperature defining method and algorithm analytically considering the correlation of thermal, operating parameters and discounted costs for the heating furnace were developed. The obtained optimization functionality provides the heating furnace appropriate thermal indices achievement at minimum discounted costs. The carried out research results prove the expediency of the proposed solutions using.

Freezing of meat raw materials affects tyramine and diamine accumulation in spontaneously fermented sausages.

Science.gov (United States)

Bover-Cid, Sara; Miguelez-Arrizado, M Jesús; Luz Latorre Moratalla, L; Vidal Carou, M Carmen

2006-01-01

Biogenic amine accumulation was studied in spontaneously fermented sausages (Fuet) manufactured from unfrozen-fresh meat (U-sausages) and frozen-thawed meat (F-sausages). The aim was to investigate whether the frozen storage of raw materials affects the microbial composition and its aminogenic activity during sausage fermentation. Tyramine was the major amine in all sausages. Although the final levels were similar, tyramine accumulated more rapidly in F-sausages, which contained putrescine as the second amine. By contrast, U-sausages accumulated much more cadaverine than putrescine. F-sausages showed a slightly lower pH and free amino acid content as well as higher counts of technological flora (lactic acid and gram positive catalase positive bacteria) and lower counts of enterobacteria. Therefore, to freeze the meat raw materials for few days before sausage manufacture could be a useful practice, especially for the artisan fermented sausages (without starter), because it helps to reduce enterobacteria development and cadaverine production.

Comparative study of the UV spectra of various raw materials OF Urtica dioica L.

Directory of Open Access Journals (Sweden)

E. A. Balagozyan

2016-01-01

Full Text Available Stinging nettle (Urtica dioica L. is one of the famous and popular medicinal plants. In Russia the herbal materials are nettle’s leaves which have haemostatic effect. At the same time abroad the rhizomes and roots of nettle are the source of drugs with antitumor activity. The chemical composition of the rhizomes and roots of nettle is quite complicated and is represented by substances such as polysaccharides, lectins, sterols etc. The aim of the present study is the comparative phytochemical research of various parts of raw nettle by spectrophotometry. The study of extracts from various raw materials of nettle has shown, that the presence of flavonoids is peculiar for leaves, flowers and fruits. Sterols dominate in the rhizomes and roots of nettle. It was also noted that the UV-spectra of extracts of female inflorescences and fruits nettle have the same absorption maxima.

STORAGE OF CHEMICALLY PRETREATED WHEAT STRAW – A MEANS TO ENSURE QUALITY RAW MATERIAL FOR PULP PREPARATION

Directory of Open Access Journals (Sweden)

Terttu Heikkilä

2010-07-01

Full Text Available The aim of this study was to evaluate effects of chemical pretreatment and storage on non-wood pulping and on pulp quality. The processes studied were hot water treatment followed by alkaline peroxide bleaching or soda cooking. The results showed that it is possible to store wheat straw outside for at least one year without significant changes in the raw material chemical composition and without adverse effects on the resulting pulp quality. The results are significant to the industry using non-woods to ensure the availability and the quality of the raw-material throughout the year in spite of the short harvesting time.

Raw material from the state of Rio Grande do Norte, Brazil, to obtain sandstone porcelain

International Nuclear Information System (INIS)

Sousa, Maria Rosimar de

2009-01-01

Currently, the production of the ceramic industry of the River Great of the North she is restricted to the manufacture of bricks and roofing tiles. development of new ceramic products of bigger added value, such as gres covering porcelanato, using regional raw materials is of basic importance for the growth of the local ceramic industry and economic development of the region. In this work, they had been studied raw materials as kaolin, sodico feldspato and quartz of the State of the Great River of the North for the attainment of an covering of the gres type porcelanato of base white.The ceramic masses had been prepared by the process saw humid. The body-of-tests they had been conformed by uniaxial prensagem of 40MPa, dried in 110 deg C and burnt between 1160 and 1240 deg, used a cycle of fast burning (approximately 60min.). The qualitative analysis of the formed phases disclosed silica, mullite e sodico feldspato after the sintering. The technological properties of burning evaluated they had been: linear retraction, water absorption, apparent specific mass, porosity and breaking strength to the flexal (shipment of 3 points). Results show that raw materials proceeding from the State of the Great River of North could be used in processes for gres porcelanato, therefore they present characteristics technological, similar chemistry, physics and to the standard of reference and the data of literature. (author)

The Supply Chain Triangle: How Synchronisation, Stability, and Productivity of Material Flows Interact

Directory of Open Access Journals (Sweden)

Florian Klug

2013-01-01

Full Text Available Empirical evidence created a commonly accepted understanding that synchronisation and stability of material flows impact its productivity. This crucial link between synchronous and stable material flows by time and quantity to create a supply chain with the highest throughput rates is at the heart of lean thinking. Although this supply chain triangle has generally been acknowledged over many years, it is necessary to reach a finer understanding of these dynamics. Therefore, we will develop and study supply chains with the help of fluid dynamics. A multistage, continuous material flow is modelled through a conservation law for material density. Unlike similar approaches, our model is not based on some quasi steady-state assumptions about the stochastic behaviour of the involved supply chain but rather on a simple deterministic rule for material flow density. These models allow us to take into account the nonlinear, dynamical interactions of different supply chain echelons and to test synchronised and stable flow with respect to its potential impacts. Numerical simulations verify that the model is able to simulate transient supply chain phenomena. Moreover, a quantification method relating to the fundamental link between synchronisation, stability, and productivity of supply chains has been found.

Mineralogical and technology characterization of raw materials of clay used for ceramic blocks fabrication

International Nuclear Information System (INIS)

Campos, N.Q.; Tapajos, N.S.

2012-01-01

In the state of Para, the red ceramic industry has several segments highly generators of jobs and a strong social appeal. With so many companies focused on this productive sector emerge, but many without any administration quality. Therefore, this study focused the technological and mineralogical characterization of the raw material used in the manufacture of ceramic blocks, by Ceramica Vermelha Company, located in the district of Inhangapi-PA. The raw material was obtained by the techniques of X-ray diffraction (XRD) to determine the present crystalline phases through an accurate and efficient procedure, where it was possible to identify the peaks relating to montmorillonite, illite and kaolinite clay in the sample, and kaolinite and quartz in the sample laterite. Another important result was the absorption of water, with average satisfactory according to the standards. According to a sieve analysis, the laterite the sand fraction showed a greater extent compared to the other, while the clay silt exceeding 80% was found to be too plastic material. The resistance to compression, the results were below the required by the standard, suggesting more accurate test methods. (author)

Selected scientific articles. (Investigations in the field of hydrides chemistry and mineral raw materials processing)

International Nuclear Information System (INIS)

Mirsaidov, U.M.

2013-01-01

Articles, included in the present book are covering period 1977-2013 y. The main scientific articles in the field of power-consuming substances, mineral raw-materials and wastes reprocessing, including uranium industry wastes are collected. Scientific works on hydrogen chemistry which carried out basically bu U.M. Mirsaidov without co-authors are considered. These works are on aluminium hydrides and borohydrides lanthanides. Besides, author's popular-science articles on research carried out by Academy of Sciences during the period when he was the President of Academy of Sciences of the Republic of Tajikistan (1995-2005) are included. Mineral raw materials and wastes reprocessing results are given as well. The book is intended for engineer and technical staff, those working in the field of hydrogen chemistry, hydrometallurgy workers, engineering chemists as well as for PhD, post graduate students and students of appropriate profiles.

Discriminative illumination: per-pixel classification of raw materials based on optimal projections of spectral BRDF.

Science.gov (United States)

Liu, Chao; Gu, Jinwei

2014-01-01

Classifying raw, unpainted materials--metal, plastic, ceramic, fabric, and so on--is an important yet challenging task for computer vision. Previous works measure subsets of surface spectral reflectance as features for classification. However, acquiring the full spectral reflectance is time consuming and error-prone. In this paper, we propose to use coded illumination to directly measure discriminative features for material classification. Optimal illumination patterns--which we call "discriminative illumination"--are learned from training samples, after projecting to which the spectral reflectance of different materials are maximally separated. This projection is automatically realized by the integration of incident light for surface reflection. While a single discriminative illumination is capable of linear, two-class classification, we show that multiple discriminative illuminations can be used for nonlinear and multiclass classification. We also show theoretically that the proposed method has higher signal-to-noise ratio than previous methods due to light multiplexing. Finally, we construct an LED-based multispectral dome and use the discriminative illumination method for classifying a variety of raw materials, including metal (aluminum, alloy, steel, stainless steel, brass, and copper), plastic, ceramic, fabric, and wood. Experimental results demonstrate its effectiveness.

Emergy analysis of biogas systems based on different raw materials.

Science.gov (United States)

Wang, Yang; Lin, Cong; Li, Jing; Duan, Na; Li, Xue; Fu, Yanyan

2013-01-01

Environmental pollution and energy crisis restrict the development of China, and the utilization of renewable technology is an effective strategy to alleviate the damage. Biogas engineering has rapidly developed attributes to solve environmental problems and create a renewable energy product biogas. In this paper, two different biogas plants' materials were analyzed by emergy method. One of them is a biogas project whose degraded material is feces (BPF system), and the other is the one whose degraded material is corn straw (BPC system). As a result, the ecological-economic values of BPF and BPC are $28,300/yr and $8,100/yr, respectively. Considering currency, environment, and human inputs, both of the biogas projects have the ability of disposing waste and potential for development. The proportion of biogas output is much more than fertilizer output; so, fertilizer utilization should be emphasized in the future. In comparison, BPF is better than BPC in the aspects of ecological-economic benefits, environmental benefits, and sustainability. The reason is the difficulty of corn straw seasonal collection and degradation. Thus it is proposed that BPC should be combined with the other raw materials.

Emergy Analysis of Biogas Systems Based on Different Raw Materials

Directory of Open Access Journals (Sweden)

Yang Wang

2013-01-01

Full Text Available Environmental pollution and energy crisis restrict the development of China, and the utilization of renewable technology is an effective strategy to alleviate the damage. Biogas engineering has rapidly developed attributes to solve environmental problems and create a renewable energy product biogas. In this paper, two different biogas plants’ materials were analyzed by emergy method. One of them is a biogas project whose degraded material is feces (BPF system, and the other is the one whose degraded material is corn straw (BPC system. As a result, the ecological-economic values of BPF and BPC are $28,300/yr and $8,100/yr, respectively. Considering currency, environment, and human inputs, both of the biogas projects have the ability of disposing waste and potential for development. The proportion of biogas output is much more than fertilizer output; so, fertilizer utilization should be emphasized in the future. In comparison, BPF is better than BPC in the aspects of ecological-economic benefits, environmental benefits, and sustainability. The reason is the difficulty of corn straw seasonal collection and degradation. Thus it is proposed that BPC should be combined with the other raw materials.

Emergy Analysis of Biogas Systems Based on Different Raw Materials

Science.gov (United States)

Wang, Yang; Lin, Cong; Li, Jing; Duan, Na; Li, Xue; Fu, Yanyan

2013-01-01

Environmental pollution and energy crisis restrict the development of China, and the utilization of renewable technology is an effective strategy to alleviate the damage. Biogas engineering has rapidly developed attributes to solve environmental problems and create a renewable energy product biogas. In this paper, two different biogas plants' materials were analyzed by emergy method. One of them is a biogas project whose degraded material is feces (BPF system), and the other is the one whose degraded material is corn straw (BPC system). As a result, the ecological-economic values of BPF and BPC are $28,300/yr and $8,100/yr, respectively. Considering currency, environment, and human inputs, both of the biogas projects have the ability of disposing waste and potential for development. The proportion of biogas output is much more than fertilizer output; so, fertilizer utilization should be emphasized in the future. In comparison, BPF is better than BPC in the aspects of ecological-economic benefits, environmental benefits, and sustainability. The reason is the difficulty of corn straw seasonal collection and degradation. Thus it is proposed that BPC should be combined with the other raw materials. PMID:23476134

Uranium as Raw Material for Nuclear Energy

International Nuclear Information System (INIS)

Lelek, V.

2006-01-01

There is lot of information bringing our attention to the problem of limited raw material resources. Fortunately uranium for nuclear energy is very concentrated source and that is why its transport brings no problems and could be realized from anywhere. Second question is if overall resources are available for current nuclear energy development. Data documenting reasons for nowadays price growth are presenting and it is clearly shown that the most probable explanation is that there is gap in new uranium mines preparation and the lot of smaller mines were closed in the period of low uranium prices. Conclusion is that there is at least for the first half of this century even for thermal reactors enough uranium. Situation could be changed if there will massive production of liquid fuel using hydrogen, produced through nuclear heating. Public information about former military uranium resources are also included. Contemporary about one half of US nuclear power-stations is using high enriched uranium diluted with natural uranium - it is expected to continue this way up to 2012. Uranium is complicated market (Authors)

Dates as raw material for agricultural distilleries

Energy Technology Data Exchange (ETDEWEB)

Laczynski, B

1971-01-01

Pit-containing dates had 88.0 to 89.2% dry matter, 41.7 to 47.5% sucrose, and 2.1 to 2.9% total protein. The mechanical broken charges of raw material were steamed, dispersed to a suspension of 15 to 17/sup 0/ Balling and pH 4.8 to 5.0, enriched with P and N, inoculated with 5 to 7 % of yeast suspension, and acidified to pH > 3.5. Thermophilic yeast cultivated at 27/sup 0/ and fermented below 30/sup 0/ for 2 days gave best results. The fermented liquor had a pH > 3.5, apparent density of 2.0/sup 0/, and contained 7.5 to 9.0 EtOH. From 100 kg dates were obtained 280 t0 340 l of the 15 to 17/sup 0/ dispersion and 320 to 360 l residue containing (per l) 6.0 to 8.5 g protein and 0.04 oat units. EtOH yield (l/quintal) was 914 for potatoes, 28.54 for molasses, 36.29 for cereals, 25.15 for dates, and 18.53 for malt.

The supply chain of civil construction industries for support the nuclear power plant construction in Indonesia

International Nuclear Information System (INIS)

Dharu Dewi; Sriyana; Moch-Djoko Birmano; Sahala Lumbanraja; Nurlaila

2013-01-01

The use of domestic products for electricity infrastructure has been set out in the Ministerial Decree number: 54/M-IND/PER/3/2012, but the infrastructure of nuclear power plants (NPP) construction has not been included. Therefore, the potential of the local industries needs to be mapped it especially supply chain of civil construction industries to estimate the capability of the local component level (DCL) at the nuclear power plant project in Indonesia. NPP is a high-technology so that if NPP will be constructed, it is necessary to involve the national capability as media technology transfer, especially for EPC (Engineering, Procurement and Construction) services. Civil construction (civil part) play role is very large, about 21%. Therefore it is necessary in particular the role of the national civil construction industry to increase the capability of local content. Preparation of Civil construction infrastructure are depend on the supply chain of raw materials. The aim of the research was to map the supply chain of the civil construction industries. Methodology this study is a survey of national industries, literature review, and searching web site. The result study is a map of civil construction industries with raw material supply chain. (author)

Glances on the year 1998. Energies and raw materials

International Nuclear Information System (INIS)

1999-01-01

This report summarizes 14 key-topics of the year 1998 in relation with the French energy and economic policy: the new start-up of energy mastery; the nuclear industry between passion and reason; the labour inspection in nuclear power plants; the law project for the modernizing and development of the electric power public utility; the main gas transportation systems; the future of Gardanne's mining basin; the raw materials in the upheaval; the French refining activity after the Auto-Oil directive; the oil company fusions; the priorities in petroleum technology research; the policy of automotive fuels distribution; the energy in regions; the mining activity in New Caledonia; the end of the BRGM-Normandy partnership. A calendar of remarkable facts is given at the end. (J.S.)

Textile-reinforced concrete using composite binder based on new types of mineral raw materials

Science.gov (United States)

Lesovik, V. S.; Glagolev, E. S.; Popov, D. Y.; Lesovik, G. A.; Ageeva, M. S.

2018-03-01

To determine the level of development of science, it is necessary to start with a particular stage in the development of society. At present, the purpose of building materials science is to create composites, which ensure safety of buildings and structures, including their protection against certain natural and man-made impacts. A new stage in construction materials science envisages the development of a technology for creating composites comfortable for a particular person. To implement this, a new paradigm for designing and synthesizing building materials with a new raw material base is needed. The optimization of the “human-material-habitat” system is a complex task, for the solution of which transdisciplinary approaches are required.

a Multi Objective Model for Optimization of a Green Supply Chain Network

Science.gov (United States)

Paksoy, Turan; Özceylan, Eren; Weber, Gerhard-Wilhelm

2010-06-01

This study develops a model of a closed-loop supply chain (CLSC) network which starts with the suppliers and recycles with the decomposition centers. As a traditional network design, we consider minimizing the all transportation costs and the raw material purchasing costs. To pay attention for the green impacts, different transportation choices are presented between echelons according to their CO2 emissions. The plants can purchase different raw materials in respect of their recyclable ratios. The focuses of this paper are conducting the minimizing total CO2 emissions. Also we try to encourage the customers to use recyclable materials as an environmental performance viewpoint besides minimizing total costs. A multi objective linear programming model is developed via presenting a numerical example. We close the paper with recommendations for future researches.

Annual report 2005 General Direction of the Energy and raw materials; Rapport annuel 2005 Direction Generale de L'Energie et des Matieres Premieres

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-07-01

This 2005 annual report of the DGEMP (General Direction of the Energy and the raw Materials), takes stock on the energy bill and accounting of the France. The first part presents the electric power, natural gas and raw materials market in France. The second part is devoted to the diversification of the energy resources with a special attention to the renewable energies and the nuclear energy. The third part discusses the energy and raw materials prices and the last part presents the international cooperation in the energy domain. (A.L.B.)

Lithic assemblages of Azokh Cave (Nagorno Karabagh, Lesser Caucasus: Raw materials, technology and regional context

Directory of Open Access Journals (Sweden)

Lena Asryan

2014-03-01

Full Text Available Azokh Cave is a Middle Pleistocene to Holocene site located in Nagorno Karabagh (Lesser Caucasus. The main entrance, Azokh 1, is a large cave that has two geological sequences (lower and upper with nine geo-archaeological units of which only the upper ones (Units I to V have a significant archaeological record.  The faunal remains and lithic artefacts in these units indicate aspects of human occupation, and exploitation of, and association with animals.     The lithic artefacts presented here were recovered from Units V, III and II during the 2002 – 2009 excavation seasons. The available chronological data indicates an age between 293 – 100 Ka for these units. The operational chain is incomplete and artefacts found in the cave are primarily end-products dominated by flake-tools. The assemblage of Unit V is composed primarily of simple, unretouched flakes with a minimal presence of retouched flakes and cores. The Unit II lithic assemblage includes a substantial Levallois component, although with fewer cores and retouched flakes. There are very few flake tools in Unit III. While it is still difficult to assign the Unit V assemblage to a techno-typological group or complex (i.e. Acheulean, Mousterian or other local techno-complexes such as the Kudarian, the Unit II assemblage is clearly associated with Mode 3 or the Mousterian techno-complex.Different local and non-local raw materials were exploited in all units for the production of lithic artefacts, although the range of raw materials is more varied in Unit II. Local chert, flint and basalt were used most commonly, probably due to their easy accessibility. Limestone, jasper and sandstone, from local and non-local sources, are present in small quantities in Units V and II. Obsidian is the only raw material that possibly originates from more distant sources. Flint and chert appear to have been preferentially exploited for flake tool production in all units, but the toolmakers show a

The European cement industry's approach to the use of secondary raw materials and fuels

Energy Technology Data Exchange (ETDEWEB)

Lawton, J.M.

1992-06-01

Position statements prepared by the European cement industry on the use of secondary raw materials and secondary fuels are introduced and presented. The statements indicate the approach of the industry to the use of these materials and, in the wider context, form part of the industry's overall approach to the environment. (Author). 2 refs.

Study of Pellets and Lumps as Raw Materials in Silicon Production from Quartz and Silicon Carbide

Science.gov (United States)

Dal Martello, E.; Tranell, G.; Gaal, S.; Raaness, O. S.; Tang, K.; Arnberg, L.

2011-10-01

The use of high-purity carbon and quartz raw materials reduces the need for comprehensive refining steps after the silicon has been produced carbothermically in the electric reduction furnace. The current work aims at comparing the reaction mechanisms and kinetics occurring in the inner part of the reduction furnace when pellets or lumpy charge is used, as well as the effect of the raw material mix. Laboratory-scale carbothermic reduction experiments have been carried out in an induction furnace. High-purity silicon carbide and two different high-purity hydrothermal quartzes were charged as raw materials at different molar ratios. The charge was in the form of lumps (size, 2-5 mm) or as powder (size, 10-20 μm), mixed and agglomerated as pellets (size, 1-3 mm) and reacted at 2273 K (2000 °C). The thermal properties of the quartzes were measured also by heating a small piece of quartz in CO atmosphere. The investigated quartzes have different reactivity in reducing atmosphere. The carbothermal reduction experiments show differences in the reacted charge between pellets and lumps as charge material. Solid-gas reactions take place from the inside of the pellets porosity, whereas reactions in lumps occur topochemically. Silicon in pellets is produced mainly in the rim zone. Larger volumes of silicon have been found when using lumpy charge. More SiO is produced when using pellets than for lumpy SiO2 for the same molar ratio and heating conditions. The two SiC polytypes used in the carbothermal reduction experiments as carbon reductants presented different reactivity.

Exploiting epoxidized natural rubber latex (ENRL) as a starting raw material for latex-based products

Science.gov (United States)

Siti Nor Qamarina, M.; Fatimah Rubaizah, M. R.; Nurul Suhaira, A.; Norhanifah, M. Y.

2017-12-01

Epoxidized natural rubber latex (ENRL) is a chemically modified natural rubber latex produced from epoxidation process that involves usage of organic peracids. Conversion of the ENRL into dry rubber products has been known to exhibit many beneficial properties, however limited published works were found on diversifiying the ENRL latex-based products applications. In this preliminary work, different source of raw materials and neutralization systems were investigated. The objective was to explore possibilities in producing distinctive ENRL. Findings have demonstrated that different source of raw materials and neutralization systems influenced the typical ENRL specifications, stability behavior and particle size distribution. Morphological observations performed on these ENRL systems appeared to agree with the ENRL characteristics achieved. Since experimenting these two main factors resulted in encouraging ENRL findings, detailed work shall be further scrutinized to search for an optimum condition in producing marketable ENRL specifically for latex-based products applications.

Installation design of pump motor control systems for supplied of the RSG-GAS secondary raw water cooling system

International Nuclear Information System (INIS)

Kiswanto; Teguh Sulistyo; M-Taufik

2013-01-01

It has designed already of an installation of the pump motor control system for supplied of raw water to fulfil the RSG-GAS secondary cooling system. The installation design of this plant is used to supply electrical energy from PLN and 3 phase generator to operate the pump motor embedded multilevel type, capacity, Q = 30 m 3 /h; electric power, PN = 4 kW; voltage, 380V/3-/50Hz, and Y connections that can be operated manually or automatically by using the automatic transfer switch. The results obtained recapitulation total load of 4 kW, the magnitude of the nominal current of 9.5 A; kind of safety and capacity are used NFB 16 A, use of this type of cable to the control panel is PLN NYY 6 mm 2 diameter maximum current capacity of 25 A cable and use the control panel to the pump motor cable type NYY 4 mm 2 diameter maximum current capacity of 20 A. The design of the pump motor control system installation is ready to be implemented. (author)

Time influence in chemical treatment of Brazilian raw materials type

International Nuclear Information System (INIS)

Argolo, F.; Dias, C.; Machado, A.; Volzone, C.; Ortiga, J.; Valenzuela Diaz, F.

2012-01-01

Clays are part of raw materials in different industries. The mineralogical composition and purity greatly influence the application thereof. Chemical treatments applied, such as acid attack, modify their properties and thus their possible uses. Taking in to account that, clay minerals, may differ by more or less resistance to chemical attacks, two types of clay were studied with different mineralogical composition to assess the degree of resistance to chemical attack treatment such as acid. Acid treatments that were applied, differ mainly in the contact time between the solid and the liquid. The solids were studied by X-ray diffraction analysis, chemical analysis and infrared analysis

Preoperational test report, raw water system

Energy Technology Data Exchange (ETDEWEB)

Clifton, F.T.

1997-10-29

This represents the preoperational test report for the Raw Water System, Project W-030. Project W-030 provides a ventilation upgrade for the four Aging Waste Facility tanks. The system supplies makeup water to the W-030 recirculation evaporative cooling towers for tanks AY1O1, AY102, AZ1O1, AZ102. The Raw Water pipe riser and associated strainer and valving is located in the W-030 diesel generator building. The tests verify correct system operation and correct indications displayed by the central Monitor and Control System.

Preoperational test report, raw water system

International Nuclear Information System (INIS)

Clifton, F.T.

1997-01-01

This represents the preoperational test report for the Raw Water System, Project W-030. Project W-030 provides a ventilation upgrade for the four Aging Waste Facility tanks. The system supplies makeup water to the W-030 recirculation evaporative cooling towers for tanks AY1O1, AY102, AZ1O1, AZ102. The Raw Water pipe riser and associated strainer and valving is located in the W-030 diesel generator building. The tests verify correct system operation and correct indications displayed by the central Monitor and Control System

Acoustic assessment of wood quality of raw forest materials : a path to increased profitability

Science.gov (United States)

Xiping Wang; Peter Carter; Robert J. Ross; Brian K. Brashaw

2007-01-01

Assessment of the quality of raw wood materials has become a crucial issue in the operational value chain as forestry and the wood processing industry are increasingly under economic pressure to maximize extracted value. A significant effort has been devoted toward developing robust nondestructive evaluation (NDE) technologies capable of predicting the intrinsic wood...

The Material Supply Adjustment Process in RAMF-SM, Step 2

Science.gov (United States)

2016-06-01

I N S T I T U T E F O R D E F E N S E A N A L Y S E S The Material Supply Adjustment Process in RAMF-SM, Step 2 Eleanor L. Schwartz James S...5564 The Material Supply Adjustment Process in RAMF-SM, Step 2 Eleanor L. Schwartz James S. Thomason, Project Leader This page is intentionally blank...9 1. Inputs and Outputs .......................................................................................10 2. Specific Steps of the PEAP

Life cycle assessment of sustainable raw material acquisition for functional magnetite bionanoparticle production.

Science.gov (United States)

Sadhukhan, Jhuma; Joshi, Nimisha; Shemfe, Mobolaji; Lloyd, Jonathan R

2017-09-01

Magnetite nanoparticles (MNPs) have several applications, including use in medical diagnostics, renewable energy production and waste remediation. However, the processes for MNP production from analytical-grade materials are resource intensive and can be environmentally damaging. This work for the first time examines the life cycle assessment (LCA) of four MNP production cases: (i) industrial MNP production system; (ii) a state-of-the-art MNP biosynthesis system; (iii) an optimal MNP biosynthesis system and (iv) an MNP biosynthesis system using raw materials sourced from wastewaters, in order to recommend a sustainable raw material acquisition pathway for MNP synthesis. The industrial production system was used as a benchmark to compare the LCA performances of the bio-based systems (cases ii-iv). A combination of appropriate life cycle impact assessment methods was employed to analyse environmental costs and benefits of the systems comprehensively. The LCA results revealed that the state-of-the-art MNP biosynthesis system, which utilises analytical grade ferric chloride and sodium hydroxide as raw materials, generated environmental costs rather than benefits compared to the industrial MNP production system. Nevertheless, decreases in environmental impacts by six-fold were achieved by reducing sodium hydroxide input from 11.28 to 1.55 in a mass ratio to MNPs and replacing ferric chloride with ferric sulphate (3.02 and 2.59, respectively, in a mass ratio to MNPs) in the optimal biosynthesis system. Thus, the potential adverse environmental impacts of MNP production via the biosynthesis system can be reduced by minimising sodium hydroxide and substituting ferric sulphate for ferric chloride. Moreover, considerable environmental benefits were exhibited in case (iv), where Fe(III) ions were sourced from metal-containing wastewaters and reduced to MNPs by electrons harvested from organic substrates. It was revealed that 14.4 kJ and 3.9 kJ of primary fossil resource

Committee on renewable resources for industrial materials (Corrim)

Science.gov (United States)

Robert W. Meyer; Carol B. Ovens

1976-01-01

In recent years major emphasis has been placed on nonrenewable resources in relation to potential national problems that may arise from possible changes in materials supply or utilization. Renewable resources, however, have received disproportionately small attention in spite of their current importance as industrial raw materials and their potential for the future. In...

The Structural Characterisation of Risk in the R&D Process of Functional Raw Materials for Electronic Devices

OpenAIRE

Chikamori, Yoji; Nasu, Seigo

2017-01-01

The electronic materials and electronics device industries remain important to Japan in spite of the general decline of the Japanese electronics industry. There is risk and uncertainty when developing functional materials in the electronics industry. However, studies examining the uncertainty and risk variables in the development of functional materials are scarce. This study examines incremental research and development (R&D) developed for raw functional materials for electronics. Our analys...

Regenerative raw materials. High technology without end; Nachwachsende Rohstoffe. Spitzentechnologie ohne Ende

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-11-03

In recent years, the use of renewable raw materials has developed rapidly. Meanwhile, biomass is one of the most important renewable energy source and a serious alternative to fossil fuel-based industry. The brochure under consideration presents an insight into the complex and promising topic ''Renewable Resources''. In particular, the areas in which renewable resources already are established as well as areas that need to be extended in the future are described.

Potential of Electronic Plastic Waste as a Source of Raw Material and Energy Recovery

International Nuclear Information System (INIS)

Norazli Othman; Nor Ezlin Ahmad Basri; Lariyah Mohd Sidek

2009-01-01

Nowadays, the production of electronic equipment is one of the fastest growing industrial activities in this world. The increase use of plastic in this sector resulted in an increase of electronic plastic waste. Basically, electronic plastic material contains various chemical elements which act as a flame retardant when electronic equipment is operated. In general, the concept of recycling electronic plastic waste should be considered in order to protect the environment. For this purpose, research has been conducted to different resins of electronic plastic waste to identify the potential of electronic plastic waste as a source of raw material and energy recovery. This study was divided into two part for example determination of physical and chemical characteristics of plastic resins and calculation of heating value for plastic resins based on Dulong formula. Results of this research show that the average calorific value of electronic waste is 30,872.42 kJ/ kg (7,375 kcal/ kg). The emission factor analysis showed that the concentration of emission value that might occur during waste management activities is below the standard set by the Environment Quality Act 1974. Basically, this research shows that electronic plastic waste has the potential to become the source of raw material and energy recovery. (author)

Determination of Au, Pt, Pd in gold ore mineral raw materials by stripping voltammetry

Directory of Open Access Journals (Sweden)

Kolpakova N.A.

2016-01-01

Full Text Available The paper considers the possibilities of use of the method of stripping voltammetry for finding platinum metals in mineral gold and ore raw material. A review of new options of electro-concentration of platinum metals on the surface of graphite electrode with the following sediment electro-oxidation and receipt of an analytical signal is presented: platinum finding was carried out by picks of selective electro-oxidation of iridium from intermetallic compound with platinum; gold finding was carried out by picks of gold electro-oxidation on the surface of graphite electrode modified by bismuth; palladium finding was performed by picks of palladium electro-oxidation on the surface of graphite electrode. 1M HCL solution was selected as a supporting electrolyte. Gold and hydrogen elimination on the process of palladium electro-oxidation was performed by means of UV irradiation of solution in the process of electro-concentration of palladium sediment. Gold, platinum and palladium determination was carried out in mineral gold and ore raw material of Verkhneamylskiy gold and ore district.

Beyond waste: new sustainable fillers from fly ashes stabilization, obtained by low cost raw materials

Directory of Open Access Journals (Sweden)

N. Rodella

2016-09-01

Full Text Available A sustainable economy can be achieved only by assessing processes finalized to optimize the use of resources. Waste can be a relevant source of energy thanks to energy-from-waste processes. Concerns regarding the toxic fly ashes can be solved by transforming them into resource as recycled materials. The commitment to recycle is driven by the need to conserve natural resources, reduce imports of raw materials, save landfill space and reduce pollution. A new method to stabilize fly ash from Municipal Solid Waste Incinerator (MSWI at room temperature has been developed thanks to COSMOS-RICE LIFE+ project (www.cosmos-rice.csmt.eu. This process is based on a chemical reaction that occurs properly mixing three waste fly ashes with rice husk ash, an agricultural by-product. COSMOS inert can replace critical raw materials (i.e. silica, fluorspar, clays, bentonite, antimony and alumina as filler. Moreover the materials employed in the stabilization procedure may be not available in all areas. This paper investigates the possibility of substituting silica fume with corresponding condensed silica fume and to substitute flue-gas desulfurization (FGD residues with low-cost calcium hydroxide powder. The removal of coal fly ash was also considered. The results will be presented and a possible substitution of the materials to stabilize fly ash will be discussed.

Analytical methods to characterize heterogeneous raw material for thermal spray process: cored wire Inconel 625

Science.gov (United States)

Lindner, T.; Bonebeau, S.; Drehmann, R.; Grund, T.; Pawlowski, L.; Lampke, T.

2016-03-01

In wire arc spraying, the raw material needs to exhibit sufficient formability and ductility in order to be processed. By using an electrically conductive, metallic sheath, it is also possible to handle non-conductive and/or brittle materials such as ceramics. In comparison to massive wire, a cored wire has a heterogeneous material distribution. Due to this fact and the complex thermodynamic processes during wire arc spraying, it is very difficult to predict the resulting chemical composition in the coating with sufficient accuracy. An Inconel 625 cored wire was used to investigate this issue. In a comparative study, the analytical results of the raw material were compared to arc sprayed coatings and droplets, which were remelted in an arc furnace under argon atmosphere. Energy-dispersive X-ray spectroscopy (EDX) and X-ray fluorescence (XRF) analysis were used to determine the chemical composition. The phase determination was performed by X-ray diffraction (XRD). The results were related to the manufacturer specifications and evaluated in respect to differences in the chemical composition. The comparison between the feedstock powder, the remelted droplets and the thermally sprayed coatings allows to evaluate the influence of the processing methods on the resulting chemical and phase composition.

RESTRUCTURING MARKETS, REORGANIZING NATURE: AN EXAMINATION OF JAPANESE STRATEGIES FOR ACCESS TO RAW MATERIALS

Directory of Open Access Journals (Sweden)

Stephen Bunker

1995-08-01

Full Text Available Theorists of hegemony combine a concern with the causes of war and peace with questions of dominant trade regimes. While this combination addresses issues of central importance for studies of international relations, it may somewhat confound the role of hegemony studies within a world systems perspective. The power of the world systems perspective lies in the consideration of entire worlds, not simply as the appropriate unit of analysis, but as integrated units of production and exchange. Hierarchy within this system reflects not simply politically enforced relations of unequal exchange, but the subordination of production in different parts of the world to regimes constructed and manipulated by core powers to their own economic and political advantage. The processes that create the power of the core and the processes by which the core subordinates the periphery constitute the critical questions within this perspective. Part, but only part, of the answer lies in the superior productive capacity and efficiency of the core, and resulting ability to dominate trade. Another part, and we believe this is primary, lies in the ways that, in order to become so productive and so efficient, economies rising to core status must organize other economies and international transport systems to assure the increasing, secure, cheap supplies of the raw materials that support productive efficiency and economic growth.

Thermal Energetic Reactor with High Reproduction of Fission Materials

Directory of Open Access Journals (Sweden)

Vladimir M. Kotov

2012-01-01

On the base of thermal reactors with high fission materials reproduction world atomic power engineering development supplying higher power and requiring smaller speed of raw uranium mining, than in the variant with fast reactors, is possible.

Radiation situation during underground mineral raw materials mining

International Nuclear Information System (INIS)

Ogorodnikov, B.I.

2007-01-01

One studied the content and the ratio of 4 0 K, 226 Ra, 232 Th and 238 U natural radionuclides in the ores mined in Egypt, Iran, China and Turkey. It is shown that in some ores, for example, in the carbonaceous shale mined in China, in the Iranian bauxite and turquoise Ra eq is higher than 370 Bq/kg, that is, it is higher than the value recommended by the International Scientific Committee on Radiation Effect. The Chinese bituminous shale shows high content of 226 Ra, while 226 Ra/ 232 Th concentration ratio varies between 10 and 60 in contrast to that of other numerous mineral raw materials being close to 1-3. In a number of mines one recorded high concentrations of radon (higher than 300 Bq/m 3 ). Inhalation of such an air results in the essential internal irradiation. The average annual dose equivalents for miners may be higher than the maximum permissible value equal to 20 mSv/g [ru