WorldWideScience

Sample records for rats bearing solid

  1. Fate of orally administered {sup 15}N-labeled polyamines in rats bearing solid tumors

    Energy Technology Data Exchange (ETDEWEB)

    Kobayashi, Masaki; Samejima, Keijiro; Goda, Hitomi; Niitsu, Masaru [Josai Univ., Sakado, Saitama (Japan). Faculty of Pharmaceutical Sciences; Xu Yongji [Qingdao Univ. of Science and Technology (China). Inst. of Chemical and Molecular Technology; Takahashi, Masakazu [Sasaki Inst., Tokyo (Japan); Hashimoto, Yoshiyuki [Kyoritsu Coll. of Pharmacy, Tokyo (Japan)

    2003-03-01

    We studied absorption, distribution, metabolism, and excretion of polyamines (putrescine, spermidine, and spermine) in the gastrointestinal tract using {sup 15}N-labeled polyamines as tracers and ionspray ionization mass spectrometry (IS-MS). The relatively simple protocol using rats bearing solid tumors provided useful information. Three {sup 15}N-labeled polyamines that were simultaneously administered were absorbed equally from gastrointestinal tract, and distributed within tissues at various concentrations. The uptake of {sup 15}N-spermidine seemed preferential to that of {sup 15}N-spermine since the concentrations of {sup 15}N-spermidine in the liver and tumors were higher, whereas those of {sup 15}N-spermine were higher in the kidney, probably due to the excretion of excess extracellular spermine. Most of the absorbed {sup 15}N-putrescine seemed to be lost, suggesting blood and tissue diamine oxidase degradation. Concentrations of {sup 15}N-spermidine and {sup 15}N-spermine in the tumor were low. We also describe the findings from two rats that were administered with {sup 15}N-spermine. The tissue concentrations of {sup 15}N-spermine were unusually high, and significant levels of {sup 15}N-spermidine were derived from {sup 15}N-spermine in these animals. (author)

  2. Velocity-Controlled Magnetic Bearings with Solid Cores

    Science.gov (United States)

    Chen, H. Ming; Walton, James

    1996-01-01

    A methodology for designing velocity-controlled magnetic bearings with laminated cores has been extended to those with solid cores. The eddy-current effect of the solid cores is modeled as an opposing magnetomotive force. The bearing control dynamics is formulated in a dimensionless fashion which can be readily reviewed on a root-locus plot for stability. This facilitates the controller design and tuning process for solid core magnetic bearings using no displacement sensors.

  3. Testing and evaluation of solid lubricants for gas bearings

    Science.gov (United States)

    Albrecht, P. R.; Fischer, W. H.

    1974-01-01

    The testing and results of testing solid film lubricants for gas lubricated bearing applications are reported. The tests simulated operational hazards of tilting pad gas bearings. The presence of a low coefficient of friction and the endurance of the solid film lubricant were the criteria for judging superior performance. All solid lubricants tested were applied to a plasma sprayed chrome oxide surface. Molybdenum disulfide and graphite fluoride were the solid lubricants tested; other test parameters included the method of application of the solid lubricant and the surface finish of the plasma sprayed coating. In general, the application of a solid film lubricant was found to significantly improve the coefficient of friction of the rubbing surfaces.

  4. Surface Modification Of The High Temperature Porous Sliding Bearings With Solid Lubricant Nanoparticles

    OpenAIRE

    2015-01-01

    A surface modification of stainless steel bearing sleeves is developed to improve the tribology characteristics at high temperature. Solid lubricant nano- and microparticles are applied for this purpose. To create the quasi-hydrodynamic lubrication regimes, the solid lubricant powder layer is made by developed pressure impregnation technique. Porous sliding bearing sleeve prototypes were made by powder metallurgy technique. The purpose of the paper is to define the friction and wear character...

  5. Estimation of optimum operating point for thrust magnetic bearing with solid magnet

    Institute of Scientific and Technical Information of China (English)

    孙首群; 田育民

    2003-01-01

    A carrying capacity-temperature rise analysis model has been established for analysis of the carrying capacity, temperature rise and carrying capacity-temperature rise characteristic of a thrust magnetic bearing with solid magnet. The results indicate that there must be an optimal operating point for the thrust magnetic beating with solid magnet. The main factors having effect on carrying capacity-temperature rise include static gap and/or ampere-turns. With proper static gap chosen, the bearing can be run near the optimal operating point by adjhusting ampere-turns, thereby optimizing the bearing properties.

  6. Bear

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    The famous physicist made for his scholars this riddle. A fellow encountered a bear in a wasteland. There was nobody else there. Both were frightened and ran away. Fellow to the north, bear to the west. Suddenly the fellow stopped, aimed his gun to the south and shot the bear. What colour was the bear?

  7. A multifunctional load-bearing solid-state supercapacitor.

    Science.gov (United States)

    Westover, Andrew S; Tian, John W; Bernath, Shivaprem; Oakes, Landon; Edwards, Rob; Shabab, Farhan N; Chatterjee, Shahana; Anilkumar, Amrutur V; Pint, Cary L

    2014-06-11

    A load-bearing, multifunctional material with the simultaneous capability to store energy and withstand static and dynamic mechanical stresses is demonstrated. This is produced using ion-conducting polymers infiltrated into nanoporous silicon that is etched directly into bulk conductive silicon. This device platform maintains energy densities near 10 W h/kg with Coulombic efficiency of 98% under exposure to over 300 kPa tensile stresses and 80 g vibratory accelerations, along with excellent performance in other shear, compression, and impact tests. This demonstrates performance feasibility as a structurally integrated energy storage material broadly applicable across renewable energy systems, transportation systems, and mobile electronics, among others.

  8. Exercise training reduces PGE2 levels and induces recovery from steatosis in tumor-bearing rats.

    Science.gov (United States)

    Lira, F S; Yamashita, A; Carnevali, L C; Gonçalves, D C; Lima, W P; Rosa, J C; Caperuto, E C; Rosa, L F C; Seelaender, M

    2010-12-01

    The effects of endurance training on PGE (2) levels and upon the maximal activity of hepatic carnitine palmitoyltransferase (CPT) system were studied in rats bearing the Walker 256 carciosarcoma. Animals were randomly assigned to a sedentary control (SC), sedentary tumor-bearing (ST), exercised control (EC), and as an exercised tumor-bearing (ET) group. Trained rats ran on a treadmill (60% VO (2) max) for 60 min/day, 5 days/week, for 8 weeks. We examined the mRNA expression (RT-PCR) and maximal activity (radioassay) of the carnitine palmitoyltransferase system enzymes (CPT I and CPT II), as well as the gene expression of fatty-acid-binding protein (L-FABP) in the liver. PGE (2) content was measured in the serum, in tumor cells, and in the liver (ELISA). CPT I and CPT II maximal activity were decreased (ptumor-bearing animals (ptumor-bearing training rats (ptumor (ptumor-bearing animals, preventing steatosis.

  9. Calculation of flash temperature for hybrid ceramic ball bearing lubricated with solid

    Institute of Scientific and Technical Information of China (English)

    李秀娟; 王黎钦; 古乐; 齐毓霖

    2002-01-01

    The scuffing behavior of hybrid ceramic bearing lubricated with solid is greatly affected by the contact flash temperature. Formulas are dedused using Lee' s asperity flash temperature method, to calculate the flash temperature of ball bearing lubricated with solid. The maximum flash temperature is calculated for hybrid ceramic ball bearings. The results show that under given conditions, the flash temperature of inner race is higher than that of outer race, the flash temperature of the hybrid ceramic bearing is sensitive to the load, rotational speed and race curvature. The flash temperature of inner race at 20 000 r/min is 66.9% more than that that at 11 000 r/min, and with the load changing from 1.1 kN to 2 kN, the flash temperature inner race goes up to 165.7%. Very common for high speed ball bearings, when curvature coefficients of both inner and outer race change from 0. 515 to 0.56, the inner race flash temperature decreases from 421. 446℃ to 56.2℃.

  10. The thermal conductance of solid-lubricated bearings at cryogenic temperatures in vacuum

    Science.gov (United States)

    Anderson, M. J.

    1996-01-01

    The thermal conductance of Hertzian contacts is of great importance to cryogenic spacecraft mechanisms such as the Infra-Red Space Observatory (ISO) and the Far Infra-Red Space Telescope (FIRST). At cryogenic temperatures, cooling of mechanism shafts and associated components occurs via conduction through the bearings. When fluid lubricants are cooled below their pour points, they no longer lubricate effectively, and it is necessary to use low shear strength solid lubricants. Currently, only very limited low temperature data exists on the thermal conductance of Hertzian contacts in both unlubricated and lubricated conditions. This paper reports on measurements of thermal conductance made on stationary ball bearings under cryo-vacuum conditions. Quantitative data is provided to support the development of computer models predicting the thermal conductance of Hertzian contacts and solid lubricants at cryogenic temperatures.

  11. Surface Modification Of The High Temperature Porous Sliding Bearings With Solid Lubricant Nanoparticles

    Directory of Open Access Journals (Sweden)

    Wiśniewska-Weinert H.

    2015-09-01

    Full Text Available A surface modification of stainless steel bearing sleeves is developed to improve the tribology characteristics at high temperature. Solid lubricant nano- and microparticles are applied for this purpose. To create the quasi-hydrodynamic lubrication regimes, the solid lubricant powder layer is made by developed pressure impregnation technique. Porous sliding bearing sleeve prototypes were made by powder metallurgy technique. The purpose of the paper is to define the friction and wear characteristics of the sleeves and to determine the influence of sealing of the sliding interface on these characteristics. It is found that application of WS2 sold lubricant nano- and micro-particles and preservation of a particle leakage out of interface allows to achieve at the high temperature the friction coefficients comparable to those at ambient temperature.

  12. Effects of leucine supplemented diet on intestinal absorption in tumor bearing pregnant rats

    Directory of Open Access Journals (Sweden)

    de Mello Maria

    2002-04-01

    Full Text Available Abstract Background It is known that amino acid oxidation is increased in tumor-bearing rat muscles and that leucine is an important ketogenic amino acid that provides energy to the skeletal muscle. Methods To evaluate the effects of a leucine supplemented diet on the intestinal absorption alterations produced by Walker 256, growing pregnant rats were distributed into six groups. Three pregnant groups received a normal protein diet (18% protein: pregnant (N, tumor-bearing (WN, pair-fed rats (Np. Three other pregnant groups were fed a diet supplemented with 3% leucine (15% protein plus 3% leucine: leucine (L, tumor-bearing (WL and pair-fed with leucine (Lp. Non pregnant rats (C, which received a normal protein diet, were used as a control group. After 20 days, the animals were submitted to intestinal perfusion to measure leucine, methionine and glucose absorption. Results Tumor-bearing pregnant rats showed impairment in food intake, body weight gain and muscle protein content, which were less accentuated in WL than in WN rats. These metabolic changes led to reduction in both fetal and tumor development. Leucine absorption slightly increased in WN group. In spite of having a significant decrease in leucine and methionine absorption compared to L, the WL group has shown a higher absorption rate of methionine than WN group, probably due to the ingestion of the leucine supplemented diet inducing this amino acid uptake. Glucose absorption was reduced in both tumor-bearing groups. Conclusions Leucine supplementation during pregnancy in tumor-bearing rats promoted high leucine absorption, increasing the availability of the amino acid for neoplasic cells and, mainly, for fetus and host utilization. This may have contributed to the better preservation of body weight gain, food intake and muscle protein observed in the supplemented rats in relation to the non-supplemented ones.

  13. Adaptations of Arginine's Intestinal-Renal Axis in Cachectic Tumor-Bearing Rats.

    Science.gov (United States)

    Buijs, Nikki; Vermeulen, Mechteld A R; Weeda, Viola B; Bading, James R; Houdijk, Alexander P J; van Leeuwen, Paul A M

    2015-01-01

    Malignancies induce disposal of arginine, an important substrate for the immune system. To sustain immune function, the tumor-bearing host accelerates arginine's intestinal-renal axis by glutamine mobilization from skeletal muscle and this may promote cachexia. Glutamine supplementation stimulates argi-nine production in healthy subjects. Arginine's intestinal-renal axis and the effect of glutamine supplementation in cancer cach-exia have not been investigated. This study evaluated the long-term adaptations of the interorgan pathway for arginine production following the onset of cachexia and the metabolic effect of glutamine supplementation in the cachectic state. Fischer-344 rats were randomly divided into a tumor-bearing group (n = 12), control group (n = 7) and tumor-bearing group receiving a glutamine-enriched diet (n = 9). Amino acid fluxes and net fractional extractions across intestine, kidneys, and liver were studied. Compared to controls, the portal-drained viscera of tumor-bearing rats took up significantly more glutamine and released significantly less citrulline. Renal metabolism was unchanged in the cachectic tumor-bearing rats compared with controls. Glutamine supplementation had no effects on intestinal and renal adaptations. In conclusion, in the cachectic state, an increase in intestinal glutamine uptake is not accompanied by an increase in renal arginine production. The adaptations found in the cachectic, tumor-bearing rat do not depend on glutamine availability.

  14. Evaluation of Advanced Solid Lubricant Coatings for Foil Air Bearings Operating at 25 and 500 C

    Science.gov (United States)

    DellaCorte, Christopher; Fellenstein, James A.; Benoy, Patricia A.

    1998-01-01

    The tribological properties of one chrome oxide and one chrome carbide based solid lubricant coating were evaluated in a partial-arc foil bearing at 25 and 500 C. Start/stop bearing operation up to 20,000 cycles were run under 10 kPa (1.5 psi) static deadweight load. Bearing friction (torque) was measured during the test. Specimen wear and SEM/EDS surface analyses were conducted after testing to understand and elucidate the tribological characteristics observed. The chrome oxide coating which contains both (Ag) and (BaF2/CaF2) for low and high temperature lubrication, exhibited low friction in sliding against Al2O3 coated foils at 25 and 500 C. The chrome carbide coating, which lacked a low temperature lubricant but contained BaF2/CaF2 as a high temperature lubricant, exhibited high friction at 25 C and low friction at 500 C against both bare and Al2O3 coated superalloy foil surfaces. Post test surface analyses suggest that improved tribological performance is exhibited when a lubricant film from the coating transfers to the foil surface.

  15. Characterisation of Materials used in Flex Bearings of Large Solid Rocket Motors

    Directory of Open Access Journals (Sweden)

    CH.V. Ram Mohan

    2011-04-01

    Full Text Available Solid rocket motors are propulsion devices for both satellite launchers and missiles, which require guidance and steering to fly along a programmed trajectory and to compensate for flight disturbances. A typical solid rocket motor consists of motor case, solid propellant grain, motor insulation, igniter and nozzle. In most solid rocket motors, thrust vector control (TVC is required. One of the most efficient methods of TVC is by flex nozzle system. The flex nozzle consists of a flexible bearing made of an elastomeric material alternating with reinforcement rings of metallic or composite material. The material characterisation of AFNOR 15CDV6 steel and the natural rubber-based elastomer developed for use in flex nozzle are discussed. This includes testing, modelling of the material, selection of a material model suitable for analysis, and the validation of material model.Defence Science Journal, 2011, 61(3, pp.264-269, DOI:http://dx.doi.org/10.14429/dsj.61.52

  16. Synthesis, characterization and stability properties of Cl-bearing hydrotalcite-pyroaurite solids

    Energy Technology Data Exchange (ETDEWEB)

    Rozov, K.; Curtius, H.; Neumann, A.; Bosbach, D. [Forschungszentrum Juelich (Germany). Inst. fuer Energie- und Klimaforschung (IEK-6)

    2013-03-01

    A layered double hydroxides (LDH) hydrotalcite-pyroaurite solid solution series (Mg{sub 1-x}Fe(II){sub x}){sub 3}Al{sub 1}Cl{sub 1}.nH{sub 2}O with variable {chi}Fe{sub solid} = Fe{sup 2+}/(Fe{sup 2+} + Mg{sup 2+}) iron mole fractions were studied in co-precipitation experiments at T = 25, 40, 45, 50, 55 and 60 C and pH = 10.00 {+-} 0.05. The compositions of the solids and reaction solutions were determined using ICP-OES, EDX (Mg, Al, Fe) and TGA techniques (Cl{sup -}, OH{sup -}, H{sub 2}O). Powder X-ray diffraction was applied for phase identification and determination of unit-cell parameters a{sub o} = b{sub o} and c{sub o} from Bragg evaluation. Syntheses products containing {chi}Fe{sub solid} > 0.13 display additional X-ray patterns attributed to the mixture of iron oxides and hydroxides. On the other side, precipitates with 0 = {chi}Fe{sub solid} {<=} 0.13 show only X-ray reflexes typical for pure LDH compositions. Moreover, in this case unit-cell parameters a{sub o} = b{sub o} as a function of {chi}Fe{sub solid} follow Vegard's law corroborating the existence of a continuous solid solution series. TGA data demonstrated the temperatures at which interlayer H{sub 2}O molecules and Cl{sup -}-anions are lost, and at which temperatures dehydroxylation of brucite-like layer occurs. Based on detailed analyses of TGA curves it was established that the increase of {chi}Fe{sub solid} does not result in a visible change of the thermal stability of hydrotalcite-pyroaurite solids. From the chemical analyses of both the solids and the reaction solutions after syntheses, preliminary Gibbs free energies of formation were estimated by using GEMS-PSI code package. Values of G{sub f}{sup o} (Hydrotalcite) = -3619.04 {+-} 15.27 kJ/mol and G{sub f}{sup o}(Pyroaurite) = -2703.61 {+-} 191.93 kJ/mol were found at 298.15 K. A comparison of our estimate with G{sub f}{sup o} value -3746.90 {+-} 11.00 kJ/mol for CO{sub 3}{sup 2-}-bearing hydrotalcite presented in our previous

  17. Anticancer effect and immunologic response to xenogeneic embryonic proteins in mice bearing Ehrlich solid carcinoma.

    Science.gov (United States)

    Symchych, T V; Fedosova, N I; Karaman, О М; Yevstratieva, L M; Potebnia, H P

    2017-03-01

    To investigate anticancer and immunologic effects of chicken embryonic proteins (CEP) in mice bearing Ehrlich solid carcinoma. The study was carried out on male Balb/c mice bearing Ehrlich solid carcinoma. The immunizations were performed after the tumor transplantation. The immune status was assessed on days 7, 14, 21 and 28 after the tumor challenge. Cytotoxic activity (CAT) of macrophages (Mph), natural killer cells (NK), cytotoxic T-lymphocytes (CTL) and blood serum, as well as the influence of the blood serum on immune cells activity was checked in MTT-assay; Mph's cytochemical activity was tested in NBT-assay; Ehrlich antigen-specific or CEP-specific antibodies were detected in ELISA-assay; medium size circulating immune complexes (CIC) were detected in reaction of 4.5% polyethylene glycol precipitation. The immunization resulted in tumor growth suppression and significant 25.64% prolongation of the survival time. In both control and immunized mice with transplanted tumors antibodies specific to Ehrlich carcinoma antigens and to CEP were detected, but antibody response was more balanced in the treatment group. In the treatment group both cytochemical and CAT of Mph was moderately activated and well preserved until late stages of tumor development; CAT of NK and CTL remained in the range of the intact mice until day 28 after the tumor transplantation. The immunized mice were well protected from accumulation of CIC and suppressive activity of autologous blood serum. Collectively, our data indicate that CEP can elicit immunomodulating and immunoprotecting effects sufficient to provide tumor growth inhibition. The further elaboration of a xenogeneic anticancer vaccine based on CEP is warranted.

  18. Development and characterization of 5-FU bearing ferritin appended solid lipid nanoparticles for tumour targeting.

    Science.gov (United States)

    Jain, Sanjay K; Chaurasiya, Akash; Gupta, Yashwant; Jain, Anekant; Dagur, Pradeep; Joshi, Beenu; Katoch, Vishwa M

    2008-08-01

    Ferritin coupled solid lipid nanoparticles were investigated for tumour targeting. Solid lipid nanoparticles were prepared using HSPC, cholesterol, DSPE and triolien. The SLNs without ferritin which has similar lipid composition were used for comparison. SLNs preparations were characterized for shape, size and percentage entrapment. The average size of SLNs was found to be in the range 110-152 nm and maximum drug entrapment was found to be 34.6-39.1%. In vitro drug release from the formulations is obeying fickian release kinetics. Cellular uptake and IC50 values of the formulation were determined in vitro in MDA-MB-468 breast cancer cells. In vitro cell binding of Fr-SLN exhibits 7.7-folds higher binding to MDA-MB-468 breast cancer cells in comparison to plain SLNs. Ex-vivo cytotoxicity assay on targeted nanoparticles gave IC50 of 1.28 microM and non-targeted nanoparticles gave IC50 of 3.56 microM. In therapeutic experiments, 5-FU, SLNs and Fr-SLNs were administered at the dose of 10 mg 5-FU/kg body weight to MDA-MB-468 tumour bearing Balb/c mice. Administration of Fr-SLNs formulation results in effective reduction in tumour growth as compared with free 5-FU and plain SLNs. The result demonstrates that this delivery system possessed an enhanced anti-tumour activity. The results warrant further evaluation of this delivery system.

  19. Activation of the ATP-ubiquitin-proteasome pathway in skeletal muscle of cachectic rats bearing a hepatoma

    Science.gov (United States)

    Baracos, V. E.; DeVivo, C.; Hoyle, D. H.; Goldberg, A. L.

    1995-01-01

    Rats implanted with Yoshida ascites hepatoma (YAH) show a rapid and selective loss of muscle protein due mainly to a marked increase (63-95%) in the rate of protein degradation (compared with rates in muscles of pair-fed controls). To define which proteolytic pathways contribute to this increase, epitrochlearis muscles from YAH-bearing and control rats were incubated under conditions that modify different proteolytic systems. Overall proteolysis in either group of rats was not affected by removal of Ca2+ or by blocking the Ca(2+)-dependent proteolytic system. Inhibition of lysosomal function with methylamine reduced proteolysis (-12%) in muscles from YAH-bearing rats, but not in muscles of pair-fed rats. When ATP production was also inhibited, the remaining accelerated proteolysis in muscles of tumor-bearing rats fell to control levels. Muscles of YAH-bearing rats showed increased levels of ubiquitin-conjugated proteins and a 27-kDa proteasome subunit in Western blot analysis. Levels of mRNA encoding components of proteolytic systems were quantitated using Northern hybridization analysis. Although their total RNA content decreased 20-38%, pale muscles of YAH-bearing rats showed increased levels of ubiquitin mRNA (590-880%) and mRNA for multiple subunits of the proteasome (100-215%). Liver, kidney, heart, and brain showed no weight loss and no change in these mRNA species. Muscles of YAH-bearing rats also showed small increases (30-40%) in mRNA for cathepsins B and D, but not for calpain I or heat shock protein 70. Our findings suggest that accelerated muscle proteolysis and muscle wasting in tumor-bearing rats result primarily from activation of the ATP-dependent pathway involving ubiquitin and the proteasome.

  20. Effect of a leucine-supplemented diet on body composition changes in pregnant rats bearing Walker 256 tumor

    National Research Council Canada - National Science Library

    G. Ventrucci; M.A.R. Mello; M.C.C. Gomes-Marcondes

    2001-01-01

    .... Since leucine is one of the principal amino acids used by skeletal muscle for energy, we investigated the changes in body composition of pregnant tumor-bearing rats after a leucine-supplemented diet...

  1. Magnetic paclitaxel nanoparticles inhibit glioma growth and improve the survival of rats bearing glioma xenografts.

    Science.gov (United States)

    Zhao, Ming; Liang, Chao; Li, Anmin; Chang, Jin; Wang, Hanjie; Yan, Runmin; Zhang, Jiajing; Tai, Junli

    2010-06-01

    Paclitaxel has fared poorly in clinical trials against brain glioma. We hypothesized that superparamagnetic nanocarriers may enhance its bioactivities by delivering it into the brain. The magnetic paclitaxel nanoparticles (MPNPs) were fabricated and their cytotoxicity against glioma was tested both in vitro and in glioma-bearing rats. MPNPs exhibited superparamagnetism and produced an extended release of paclitaxel over 15 days in vitro. They were easily internalized into glioma cells and exerted remarkable toxicity, as free paclitaxel did. Furthermore, after intravenous injection of MPNPs to glioma-bearing rats and magnetic targeting with a 0.5 T magnet, drug content increased for 6- to 14-fold in implanted glioma and 4.6- to 12.1-fold in the normal brain compared to free paclitaxel. The survival of glioma-bearing rats was significantly prolonged after magnetic targeting therapy with MPNPs. MPNPs efficiently delivered paclitaxel into brain glioma by magnetic targeting and enhance its antitumor activity. They are promising for local chemotherapy for malignant glioma.

  2. Elevated blood lactate is not a primary cause of anorexia in tumor-bearing rats.

    Science.gov (United States)

    Chance, William T; Dayal, Ramesh; Friend, Lou Ann; James, J Howard

    2004-01-01

    Tumor-bearing (TB) rats exhibit elevated concentrations of lactate in blood contiguous with the development of anorexia. Continuous intravenous infusion of lactate into non-TB rats reduced food intake at plasma concentrations lower than those observed in anorectic TB rats. Levels of neuropeptide Y (NPY) were elevated in the ventromedial (VMH) and dorsomedial hypothalamic regions of lactate-infused rats. The addition of the enhancer of pyruvate dehydrogenase activity, dichloroacetate (DCA), to the drinking water of TB rats (0.1-0.4%) normalized blood lactate concentration but had no significant effect on anorexia. However, the elevated concentration of NPY in the VMH of anorectic TB rats was also normalized by the DCA treatment. No alterations in regional hypothalamic levels of corticotropin-releasing factor were observed within any treatment conditions. These results suggest that, although hyperlactatemia may be involved in maintaining elevated NPY concentrations in anorectic TB rats, it does not appear to be a significant factor in the etiology of experimental cancer anorexia.

  3. Inhibitory effect of coffee on hepatoma proliferation and invasion in culture and on tumor growth, metastasis and abnormal lipoprotein profiles in hepatoma-bearing rats.

    Science.gov (United States)

    Miura, Yutaka; Ono, Kanako; Okauchi, Rieko; Yagasaki, Kazumi

    2004-02-01

    We have already reported that instant coffee powder (ICP) and ICP-loaded rat sera could suppress proliferation and invasion of rat ascites hepatoma cell line of AH109A in vitro. In this report, we examined the mechanisms for suppression of tumor cell proliferation and invasion by ICP, and the effect of ICP on in vivo tumor growth, metastasis and abnormal lipoprotein profiles in hepatoma-bearing rats. ICP, when directly added to the culture media, induced cell cycle arrest (elongation of S phase) at a lower concentration (0.3 mg/mL) and apoptosis at a higher concentration (0.6-1.2 mg/mL). ICP and ICP-loaded rat sera showed reactive oxygen species (ROS)-scavenging property and canceled the enhancement of invasive activity of hepatoma cells induced by ROS in vitro. These results suggest that ICP suppresses the proliferation by inducing cell cycle arrest and apoptosis, and the invasion by scavenging ROS and that ICP could retain these properties after their gastrointestinal absorption. The hepatoma-bearing rats were fed with a 20% casein diet (20C) or 20C supplemented with 0.1%, ICP for 14 d. Dietary ICP significantly reduced solid tumor growth and tended to reduce hepatoma metastases to lung and lymphatic nodes, suggesting that ICP could suppress tumor cell proliferation and invasion in vivo. In addition, dietary ICP significantly increased serum high-density lipoprotein (HDL)-cholesterol and tended to reduce very low-density and low-density lipoprotein (VLDL+LDL)-cholesterol, resulting in amelioration of abnormal lipoprotein profiles occurred in hepatoma-bearing rats. In conclusion, ICP has the ability to induce cell cycle arrest and apoptosis in hepatoma cells and to suppress tumor cell invasion by reducing oxidative stresses in vitro, and it could also exhibit these effects in vivo, leading to the inhibition of tumor growth and metastases.

  4. Chemical sympathectomy increases neutrophil-to-lymphocyte ratio in tumor-bearing rats but does not influence cancer progression.

    Science.gov (United States)

    Horvathova, Lubica; Tillinger, Andrej; Sivakova, Ivana; Mikova, Lucia; Mravec, Boris; Bucova, Maria

    2015-01-15

    The sympathetic nervous system regulates many immune functions and modulates the anti-tumor immune defense response, too. Therefore, we studied the effect of 6-hydroxydopamine induced sympathectomy on selected hematological parameters and inflammatory markers in rats with Yoshida AH130 ascites hepatoma. We found that chemically sympathectomized tumor-bearing rats had significantly increased neutrophil-to-lymphocyte ratio, leukocyte-to-lymphocyte ratio, and plasma levels of tumor necrosis factor alpha. Although our findings showed that sympathetic denervation in tumor-bearing rats led to increased neutrophil-to-lymphocyte ratio, that is an indicator of the disease progression, we found no significant changes in tumor growth and survival of sympathectomized tumor-bearing rats.

  5. Numerical Simulation and Experimental Study on the Gas-Solid Coupling of the Aerostatic Thrust Bearing with Elastic Equalizing Pressure Groove

    Directory of Open Access Journals (Sweden)

    Zhao Xiao-long

    2017-01-01

    Full Text Available Aiming at the problem of low stiffness of aerostatic bearing, according to the principle of gas-solid coupling, this paper designs a kind of aerostatic thrust bearing with elastic equalizing pressure groove (EEPG and investigates the effect of elastic equalizing pressure groove (EEPG on the stiffness of aerostatic bearing. According to the physical model of the bearing, one deduces the deformation control equation of the elastic equalizing pressure groove and the control equation of gas lubrication, using finite difference method to derive the control equations and coupling calculation. The bearing capacity and stiffness of aerostatic bearing with EEPG in different gas film clearance are obtained. The calculation results show that the stiffness increased by 59%. The results of numerical calculation and experimental results have good consistency, proving the gas-solid coupling method can improve the bearing stiffness.

  6. Effect of estrogen and antiestrogen therapy in rats bearing mesenchymal tumors.

    Science.gov (United States)

    Remedi, M M; Demarchi, M; Hliba, E; Depiante-Depaoli, M

    1999-01-01

    We applied both hormonal and antiestrogen treatment in female Wistar rats to analyze the estrogen dependence of the growth of sarcomas induced with 9,10-dimethyl-1,2-benzanthracene. Animals bearing tumors of 10 mm in diameter were divided at random into five groups and submitted to different treatments during 24 weeks. The treatment with ovariectomy and tamoxifen in tumor-bearing animals resulted in tumor growth suppression and prolonged survival by a protection against the lethal tumor. On the other hand, the estrogen treatment exerted an adverse effect showing a faster growth of the tumors and a great decrease in survival. In summary, the antiestrogen treatment can have an antitumor effect in mesenchymal tumors, possibly by modifying the immunological status of the host.

  7. The in vitro and in vivo effects of human growth hormone administration on tumor growth of rats bearing a transplantable rat pituitary tumor (7315b)

    NARCIS (Netherlands)

    A. Binnerts (Arjen); P. Uitterlinden (Piet); L.J. Hofland (Leo); P.M. van Koetsveld (Peter); S.W.J. Lamberts (Steven)

    1990-01-01

    markdownabstractAbstract The direct effects of human GH and IGF-I on PRL secretion and cell proliferation were studied on PRL secreting rat pituitary tumor 7315b cells in vitro, as well as the effects in vivo of human GH administration on body weight, IGF-I levels and tumor size in rats bearing th

  8. Fluid-solid coupling model for studying wellbore instability in drilling of gas hydrate bearing sediments

    Institute of Scientific and Technical Information of China (English)

    程远方; 李令东; 崔青

    2013-01-01

    As the oil or gas exploration and development activities in deep and ultra-deep waters become more and more, encountering gas hydrate bearing sediments (HBS) is almost inevitable. The variation in temperature and pressure can destabilize gas hydrate in nearby formation around the borehole, which may reduce the strength of the formation and result in wellbore instability. A non-isothermal, transient, two-phase, and fluid-solid coupling mathematical model is proposed to simulate the complex stability performance of a wellbore drilled in HBS. In the model, the phase transition of hydrate dissociation, the heat exchange between drilling fluid and formation, the change of mechanical and petrophysical properties, the gas-water two-phase seepage, and its interaction with rock deformation are considered. A finite element simulator is developed, and the impact of drilling mud on wellbore instability in HBS is simulated. Results indicate that the re-duction in pressure and the increase in temperature of the drilling fluid can accelerate hydrate decomposition and lead to mechanical properties getting worse tremendously. The cohesion decreases by 25% when the hydrate totally dissociates in HBS. This easily causes the wellbore instability accordingly. In the first two hours after the formation is drilled, the regions of hydrate dissociation and wellbore instability extend quickly. Then, with the soaking time of drilling fluid increasing, the regions enlarge little. Choosing the low temperature drilling fluid and increasing the drilling mud pressure appropriately can benefit the wellbore stability of HBS. The established model turns out to be an efficient tool in numerical studies of the hydrate dissociation behavior and wellbore stability of HBS.

  9. Theophylline is able to partially revert cachexia in tumour-bearing rats

    Directory of Open Access Journals (Sweden)

    Olivan Mireia

    2012-08-01

    Full Text Available Abstract Background and aims The aim of the present investigation was to examine the anti-wasting effects of theophylline (a methylxantine present in tea leaves on a rat model of cancer cachexia. Methods The in vitro effects of the nutraceuticals on proteolysis were examined on muscle cell cultures submitted to hyperthermia. Individual muscle weights, muscle gene expression, body composition and cardiac function were measured in rats bearing the Yoshida AH-130 ascites hepatoma, following theophylline treatment. Results Theophylline treatment inhibited proteolysis in C2C12 cell line and resulted in an anti-proteolytic effect on muscle tissue (soleus and heart, which was associated with a decrease in circulating TNF-alpha levels and with a decreased proteolytic systems gene expression. Treatment with the nutraceutical also resulted in an improvement in body composition and cardiac function. Conclusion Theophylline - alone or in combination with drugs - may be a candidate molecule for the treatment of cancer cachexia.

  10. Effect of complex amino acid imbalance on growth of tumor in tumor-bearing rats

    Institute of Scientific and Technical Information of China (English)

    Yin-Cheng He; Yuan-Hong Wang; Jun Cao; Ji-Wei Chen; Ding-Yu Pan; Ya-Kui Zhou

    2003-01-01

    AIM: To investigate the effect of complex amino acid imbalance on the growth of tumor in tumor-bearing (TB) rats.METHODS: Sprague-Dawlley (SD) rats underwent jejunostomy for nutritional support. A suspension of Walker256 carcinosarcoma cells was subcutaneously inoculated.TB rats were randomly divided into groups A, B, C and D according to the formula of amino acids in enteral nutritional solutions, respectively. TB rats received jejunal feedings supplemented with balanced amino acids (group A),methionine-depleted amino acids (group B), valine-depleted amino acids (group C) and methionine- and valine-depleted complex amino acid imbalance (group D) for 10 days. Tumor volume, inhibitory rates of tumor, cell cycle and life span of TB rats were investigated.RESULTS: The G0/G1 ratio of tumor cells in group D (80.5±9.0) % was higher than that in groups A, B and C which was 67.0±5.1 %, 78.9±8.5 %, 69.2±6.2 %, respectively (P<0.05). The ratio of S/G2M and PI in group D were lower than those in groups A, B and C. The inhibitory rate of tumor in groups B, C and D was 37.2 %, 33.3 % and 43.9 %,respectively (P<0.05). The life span of TB rats in group D was significantly longer than that in groups B, C, and A.CONCLUSION: Methionine/valine-depleted amino acid imbalance can inhibit tumor growth. Complex amino acids of methionine and valine depleted imbalance have stronger inhibitory effects on tumor growth.

  11. Relationship between immune state and tumor growth rate in rats bearing progressive and non-progressive mammary tumors.

    Science.gov (United States)

    Remedi, M M; Hliba, E; Demarchi, M; Depiante-Depaoli, M

    1998-08-01

    Impaired immune responses occur frequently in cancer patients or in tumor-bearing animals, but the mechanisms of the tumor-induced immune defects remain poorly understood. The aim of the present study was to determine the relevance of the immune system in the control of tumor growth. We have developed a model of progressive and non-progressive mammary tumor, chemically induced in female Wistar rats. In this model we evaluated the development of an immune response after immunization of rats bearing progressive and non-progressive tumors with a non-related antigen, such as sheep red blood cells. We also studied the activation state of peritoneal macrophages from animals bearing tumors by evaluating the production of free radicals. Our findings indicated that the cell-mediated immunity in rats bearing progressive tumors fails to respond to heterologous antigen in vivo, as demonstrated by a negative delayed-type hypersensitivity reaction, and is accompanied by minor nitric oxide production by peritoneal exudate cells as well as a lower capacity for macrophage activation. The study of non-progressive tumor-bearing rats indicated that the cell-mediated immune response was intact and an activated state of macrophages was found in vivo. The results described in this paper should be taken into account when therapies based on cancer vaccines are chosen for the treatment of cancer.

  12. Low energy scatter due to in-situ irradiation of solid tumors in laboratory rats

    Energy Technology Data Exchange (ETDEWEB)

    Ritenour, E.R. Jr.

    1980-01-01

    A study of the pattern of scattered radiation in laboratory rat cadavers during irradiation of solid tumors on the animals' flanks was performed. The animals were wrapped in a lead shield having a circular cutout through which the tumor protruded. Irradiations were performed with a 250 kVp 15ma X-ray machine with a measured half value layer of 1.39 mmCu. Lead shielding was of sufficient thickness to attenuate essentially all of the beam. The absorbed dose measured in the animal was then due to internal scatter from the tumor. Arrays of thermoluminescent dosimeters (TLDs) were placed beneath the skin of 17 animals bearing a solid tumor (hepatoma H-4-II-E). Absorbed dose was seen to vary isotropically, decreasing as the inverse distance squared from the tumor. Analysis of experimental error played a major role in this study. A pilot study resulted in standard errors that were 35% of the mean absorbed dose measurements. A careful reassessment of methods of manipulating the animals and the dosimetry system resulted in a reduction in standard error to 14% of the mean for small groups (less than 10 animals).

  13. Increased brain edema following 5-aminolevulinic acid mediated photodynamic in normal and tumor bearing rats

    Science.gov (United States)

    Hirschberg, Henry; Angell-Petersen, Even; Spetalen, Signe; Mathews, Marlon; Madsen, Steen J.

    2007-02-01

    Introduction: Failure of treatment for high grade gliomas is usually due to local recurrence at the site of surgical resection indicating that a more aggressive form of local therapy, such as PDT, could be of benefit. PDT causes damage to both tumor cells as well as cerebral blood vessels leading to degradation of the blood brain barrier with subsequent increase of brain edema. The increase in brain edema following ALA-PDT was evaluated in terms of animal survival, histopatological changes in normal brain and tumor tissue and MRI scanning. The effect of steroid treatment, to reduce post-treatment PDT induced edema, was also examined. Methods:Tumors were established in the brains of inbred BD-IX and Fisher rats. At various times following tumor induction the animals were injected with ALA ip. and four hours later light treatment at escalating fluences and fluence rates were given. Nontumor bearing control animals were also exposed to ALA-PDT in a similar manner to evaluate damage to normal brain and degree of blood brain barrier (BBB) disruption. Results: Despite a very low level of PpIX production in normal brain, with a 200:1 tumor to normal tissue selectivity ratio measured at a distance of 2 mm from the tumor border, many animals succumbed shortly after treatment. A total radiant energy of 54 J to non-tumor bearing animals resulted in 50% mortality within 5 days of treatment. Treatment of tumor bearing animals with moderate fluence levels produced similar brain edema compared to higher fluence levels. ALA PDT in nontumor bearing animals produced edema that was light dose dependent. PDT appeared to open the BBB for a period of 24-48 hrs after which it was restored. The addition of post operative steroid treatment reduced the incident of post treatment morbidity and mortality. Conclusions: T2 and contrast enhanced T1 MRI scanning proved to be a highly effective and non-evasive modality in following the development of the edema reaction and the degree and time

  14. Leucine-rich diet alters the eukaryotic translation initiation factors expression in skeletal muscle of tumour-bearing rats

    Directory of Open Access Journals (Sweden)

    Mello Maria

    2007-03-01

    Full Text Available Abstract Background Cancer-cachexia induces a variety of metabolic disorders on protein turnorver, decreasing protein synthesis and increasing protein degradation. Controversly, insulin, other hormones, and branched-chain amino acids, especially leucine, stimulate protein synthesis and modulate the activity of translation initiation factors involved in protein synthesis. Since the tumour effects are more pronounced when associated with pregnancy, ehancing muscle-wasting proteolysis, in this study, the influence of a leucine-rich diet on the protein synthesis caused by cancer were investigated. Methods Pregnant rats with or without Walker 256 tumour were distributed into six groups. During 20 days of experiment, three groups were fed with a control diet: C – pregnant control, W – tumour-bearing, and P – pair-fed, which received the same amount of food as ingested by the W group; three other groups of pregnant rats were fed a leucine-rich diet: L – pregnant leucine, WL – tumour-bearing, and PL – pair-fed, which received the same amount of food as ingested by the WL group. Results The gastrocnemius muscle of WL rats showed increased incorporation of leucine in protein compared to W rats; the leucine-rich diet also prevented the decrease in plasma insulin normally seen in W. The expression of translation initiation factors increased when tumour-bearing rats fed leucine-rich diet, with increase of ~35% for eIF2α and eIF5, ~17% for eIF4E and 20% for eIF4G; the expression of protein kinase S6K1 and protein kinase C was also highly enhanced. Conclusion The results suggest that a leucine-rich diet increased the protein synthesis in skeletal muscle in tumour-bearing rats possibly through the activation of eIF factors and/or the S6kinase pathway.

  15. Magnetite nanoparticles inhibit tumor growth and upregulate the expression of p53/p16 in Ehrlich solid carcinoma bearing mice.

    Science.gov (United States)

    Bassiony, Heba; Sabet, Salwa; Salah El-Din, Taher A; Mohamed, Mona M; El-Ghor, Akmal A

    2014-01-01

    Magnetite nanoparticles (MNPs) have been widely used as contrast agents and have promising approaches in cancer treatment. In the present study we used Ehrlich solid carcinoma (ESC) bearing mice as a model to investigate MNPs antitumor activity, their effect on expression of p53 and p16 genes as an indicator for apoptotic induction in tumor tissues. MNPs coated with ascorbic acid (size: 25.0±5.0 nm) were synthesized by co-precipitation method and characterized. Ehrlich mice model were treated with MNPs using 60 mg/Kg day by day for 14 injections; intratumorally (IT) or intraperitoneally (IP). Tumor size, pathological changes and iron content in tumor and normal muscle tissues were assessed. We also assessed changes in expression levels of p53 and p16 genes in addition to p53 protein level by immunohistochemistry. Our results revealed that tumor growth was significantly reduced by IT and IP MNPs injection compared to untreated tumor. A significant increase in p53 and p16 mRNA expression was detected in Ehrlich solid tumors of IT and IP treated groups compared to untreated Ehrlich solid tumor. This increase was accompanied with increase in p53 protein expression. It is worth mentioning that no significant difference in expression of p53 and p16 could be detected between IT ESC and control group. MNPs might be more effective in breast cancer treatment if injected intratumorally to be directed to the tumor tissues.

  16. Magnetite nanoparticles inhibit tumor growth and upregulate the expression of p53/p16 in Ehrlich solid carcinoma bearing mice.

    Directory of Open Access Journals (Sweden)

    Heba Bassiony

    Full Text Available BACKGROUND: Magnetite nanoparticles (MNPs have been widely used as contrast agents and have promising approaches in cancer treatment. In the present study we used Ehrlich solid carcinoma (ESC bearing mice as a model to investigate MNPs antitumor activity, their effect on expression of p53 and p16 genes as an indicator for apoptotic induction in tumor tissues. METHOD: MNPs coated with ascorbic acid (size: 25.0±5.0 nm were synthesized by co-precipitation method and characterized. Ehrlich mice model were treated with MNPs using 60 mg/Kg day by day for 14 injections; intratumorally (IT or intraperitoneally (IP. Tumor size, pathological changes and iron content in tumor and normal muscle tissues were assessed. We also assessed changes in expression levels of p53 and p16 genes in addition to p53 protein level by immunohistochemistry. RESULTS: Our results revealed that tumor growth was significantly reduced by IT and IP MNPs injection compared to untreated tumor. A significant increase in p53 and p16 mRNA expression was detected in Ehrlich solid tumors of IT and IP treated groups compared to untreated Ehrlich solid tumor. This increase was accompanied with increase in p53 protein expression. It is worth mentioning that no significant difference in expression of p53 and p16 could be detected between IT ESC and control group. CONCLUSION: MNPs might be more effective in breast cancer treatment if injected intratumorally to be directed to the tumor tissues.

  17. Carnitine administration reduces cytokine levels, improves food intake, and ameliorates body composition in tumor-bearing rats.

    Science.gov (United States)

    Laviano, Alessandro; Molfino, Alessio; Seelaender, Marilia; Frascaria, Teresa; Bertini, Giuseppe; Ramaccini, Cesarina; Bollea, Maria Rosa; Citro, Gennaro; Rossi Fanelli, Filippo

    2011-12-01

    Increased cytokine expression contributes to the pathogenesis of cancer anorexia?cachexia syndrome. Carnitine may reduce inflammation in chronic diseases. We tested the effects of L-propionylcarnitine (PC group) or saline (C group) on food intake (FI), body composition, and inflammatory status of MCA-sarcoma-bearing rats. On tumor appearance, rats were randomly assigned to daily i.p. injection of L-propionylcarnitine (250 mg/kgBW/d; n = 8) or saline (equal volume; n = 8). FI and fat-free mass wasting improved in PC rats only (p < .01 vs. controls). Cytokines? levels decreased in PC rats vs. controls (p < .02). Results suggest that carnitine may ameliorate cancer anorexia?cachexia, via reduction of the inflammatory status.

  18. Monochromatic Minibeams Radiotherapy: From Healthy Tissue-Sparing Effect Studies Toward First Experimental Glioma Bearing Rats Therapy

    Energy Technology Data Exchange (ETDEWEB)

    Deman, Pierre [INSERM, Grenoble (France); Universite Joseph Fourier, Institut des Neurosciences, Grenoble (France); European Synchrotron Radiation Facility, Grenoble (France); Vautrin, Mathias [INSERM, Grenoble (France); Universite Joseph Fourier, Institut des Neurosciences, Grenoble (France); European Synchrotron Radiation Facility, Grenoble (France); DOSIsoft, Cachan (France); Edouard, Magali [INSERM, Grenoble (France); Universite Joseph Fourier, Institut des Neurosciences, Grenoble (France); European Synchrotron Radiation Facility, Grenoble (France); Stupar, Vasile [INSERM, Grenoble (France); Universite Joseph Fourier, Institut des Neurosciences, Grenoble (France); Bobyk, Laure; Farion, Regine [INSERM, Grenoble (France); Universite Joseph Fourier, Institut des Neurosciences, Grenoble (France); European Synchrotron Radiation Facility, Grenoble (France); Elleaume, Helene [INSERM, Grenoble (France); Universite Joseph Fourier, Institut des Neurosciences, Grenoble (France); European Synchrotron Radiation Facility, Grenoble (France); Grenoble University Hospital, Grenoble (France); Remy, Chantal; Barbier, Emmanuel L. [INSERM, Grenoble (France); Universite Joseph Fourier, Institut des Neurosciences, Grenoble (France); Esteve, Francois [INSERM, Grenoble (France); Universite Joseph Fourier, Institut des Neurosciences, Grenoble (France); European Synchrotron Radiation Facility, Grenoble (France); Grenoble University Hospital, Grenoble (France); Adam, Jean-Francois, E-mail: adam@esrf.fr [INSERM, Grenoble (France); Universite Joseph Fourier, Institut des Neurosciences, Grenoble (France); European Synchrotron Radiation Facility, Grenoble (France); Grenoble University Hospital, Grenoble (France)

    2012-03-15

    Purpose: The purpose of this study was to evaluate high-dose single fraction delivered with monochromatic X-rays minibeams for the radiotherapy of primary brain tumors in rats. Methods and Materials: Two groups of healthy rats were irradiated with one anteroposterior minibeam incidence (four minibeams, 123 Gy prescribed dose at 1 cm depth in the brain) or two interleaved incidences (54 Gy prescribed dose in a 5 Multiplication-Sign 5 Multiplication-Sign 4.8 mm{sup 3} volume centered in the right hemisphere), respectively. Magnetic resonance imaging (MRI) follow-up was performed over 1 year. T2-weighted (T2w) images, apparent diffusion coefficient (ADC), and blood vessel permeability maps were acquired. F98 tumor bearing rats were also irradiated with interleaved minibeams to achieve a homogeneous dose of 54 Gy delivered to an 8 Multiplication-Sign 8 Multiplication-Sign 7.8 mm{sup 3} volume centered on the tumor. Anatomic and functional MRI follow-up was performed every 10 days after irradiation. T2w images, ADC, and perfusion maps were acquired. Results: All healthy rats were euthanized 1 year after irradiation without any clinical alteration visible by simple examination. T2w and ADC measurements remain stable for the single incidence irradiation group. Localized Gd-DOTA permeability, however, was observed 9 months after irradiation for the interleaved incidences group. The survival time of irradiated glioma bearing rats was significantly longer than that of untreated animals (49 {+-} 12.5 days versus 23.3 {+-} 2 days, p < 0.001). The tumoral cerebral blood flow and blood volume tend to decrease after irradiation. Conclusions: This study demonstrates the sparing effect of minibeams on healthy tissue. The increased life span achieved for irradiated glioma bearing rats was similar to the one obtained with other radiotherapy techniques. This experimental tumor therapy study shows the feasibility of using X-ray minibeams with high doses in brain tumor radiotherapy.

  19. Effect of a leucine-supplemented diet on body composition changes in pregnant rats bearing Walker 256 tumor

    OpenAIRE

    Ventrucci G.; Mello M.A.R; Gomes-Marcondes M.C.C.

    2001-01-01

    Cancer patients present high mobilization of host protein, with a decrease in lean body mass and body fat depletion occurring in parallel to neoplastic growth. Since leucine is one of the principal amino acids used by skeletal muscle for energy, we investigated the changes in body composition of pregnant tumor-bearing rats after a leucine-supplemented diet. Sixty pregnant Wistar rats divided into six groups were fed a normal protein diet (18%, N) or a leucine-supplemented diet (3% L-leucine, ...

  20. Fractional-order system identification and proportional-derivative control of a solid-core magnetic bearing.

    Science.gov (United States)

    Zhong, Jianpeng; Li, Lichuan

    2014-07-01

    This paper presents the application of fractional-order system identification (FOSI) and proportional-derivative (PD(µ)) control to a solid-core magnetic bearing (MB). A practical strategy for closed-loop incommensurate FOSI along with a modified error criterion is utilized to model the MB system and a corresponding, verification experiment is carried out. Based on the identified model, integer-order (IO) PD and fractional-order (FO) PD(µ) controllers are designed and compared with the same specifications. Besides, the relation between the two categories of controllers is discussed by their feasible control zones. Final simulation and experimental results show that the FO PD(µ) controller can significantly improve the transient and steady-state performance of the MB system comparing with the IO PD controller. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

  1. A comparative study on the hepatoprotective action of bear bile and coptidis rhizoma aqueous extract on experimental liver fibrosis in rats

    Directory of Open Access Journals (Sweden)

    Wang Ning

    2012-11-01

    Full Text Available Abstract Aim of the study Bear bile and Coptidis Rhizoma have been used in Chinese medicine with a long tradition in treating heat-diseases. Both bear bile and Coptidis Rhizoma are used to treat liver diseases in clinical practice of Chinese Medicine. Since bears are currently endangered, it raises the question whether the use of bear bile is ethical. To look for substitute for bear bile, the aim of this study is to compare the anti-fibrotic effects of Coptidis Rhizoma and its major component berberine with the actions of bear bile and its major compound tauroursodeoxycholic acid on experimental liver fibrosis in rats. Method Quality assessment was conducted with high performance liquid chromatography. The experimental liver fibrosis in rats was induced by carbon tetrachloride, alcohol, and bile duct ligation respectively. The biochemical criteria in the blood and tissue samples were measured to evaluate the anti-fibrotic properties and underlying mechanisms of the drugs. Results Coptidis Rhizoma Aqueous Extract (CRAE, berberine, and bear bile exerted anti-fibrotic properties on various liver fibrosis models in rats. CRAE and berberine significantly reduced the peroxidative stress in liver through increasing the superoxide dismutase enzyme activity. CRAE and berberine were able to excrete bilirubin products from the liver and protect hepatocytes from cholestatic damage. The effect of CRAE and berberine are comparable to that of bear bile. Conclusion Instead of using bear bile, CRAE and berberine can be potential substitutes in treating liver fibrosis.

  2. Dextran-functionalized magnetic fluid mediating magnetohyperthermia for treatment of Ehrlich-solid-tumor-bearing mice: toxicological and histopathological evaluations.

    Science.gov (United States)

    Miranda-Vilela, Ana Luisa; Yamamoto, Kelly Reis; Miranda, Kely Lopes Caiado; Matos, Breno Noronha; de Almeida, Marcos Célio; Longo, João Paulo Figueiró; de Souza Filho, José; Fernandes, Juliana Menezes Soares; Sartoratto, Patrícia Pommé Confessori; Lacava, Zulmira Guerrero Marques

    2014-04-01

    Dextran-functionalized maghemite fluid (DexMF) has been tested to treat Ehrlich-solid-tumor-bearing mice, evidencing its potential use in mediating magnetohyperthermia in breast cancer treatment. However, although magnetic nanoparticles tend to accumulate in tumor tissues, part of the nanomaterial can reach the blood stream, and then the organism. The aim of this study was to investigate the acute systemic effects of the intratumoral injection of DexMF mediating magnetohyperthermia in the treatment of an advanced clinical Ehrlich-solid-tumor, assessed through histopathological analyses of liver, kidneys, heart and spleen, comet assay, micronucleus test, hemogram, and serum levels of bilirubin, aspartate aminotransferase, alanine aminotransferase, gamma glutamyl transferase, alkaline phosphatase, creatinine, and urea. The tumor's histopathology and morphometry were used to assess its aggressiveness and regression. DexMF mediating hyperthermia was effective in containing tumor aggressiveness and in inducing tumor regression, besides showing no toxic effects. Its physical characteristics also suggest that it is safe to use in other biomedical applications.

  3. In vivo image of radioiodinated IVDU and IVFRU in HSV-TK gene tranduced hepatocellular carcinoma bearing buffalo rat

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Tae Sup; Choi, T. H.; Ahn, S. H.; Woo, K. S.; Chung, W. S.; Lee, S. J.; Choi, C. W. [Korea Cancer Center Hospital, Seoul (Korea, Republic of)

    2000-07-01

    The extent of gene delivery and expression in gene therapy with suicide genes such as herpes simplex virus thymidine kinase (HSV-tk) is assessed with measurement of selective localization of radioiodinated HSV-tk substrates in HSV-tk expressing tumor. We compared n vitro uptake of {sup 125}I-IVDU, IVFRU and in vivo image of HSV-tk gene tranduced hepatocellular carcinoma model. Using H{sub 2}O{sub 2}(hydrogen peroxide), IVDU and IVFRU was radiolabeled as carrier free form. The uptake of {sup 125}I-IVDU IVFRU was determined with increasing incubation periods in MCA-tk and MCA cell line (1X10{sup 6}cell/flask). The cell harvested and counted after incubation of 15, 30, 60, 120, 240, 480 minutes. For estimating accumulation of radiolabelled IVDU, IVFRU in HSV-tk expressing tumor, MCA-tk cells (1 X 10{sup 6}/100 {mu}l) injected intramuscularly into right thigh of buffalo rats. To determine selective localization of radiolabelled IVDU, IVFRU in HSV-tk expressing hepatocellular carcinoma bearing buffalo rats, MCA-tk cells (1X 10{sup 7} cell/100 {mu}l) were injected subcutaneously into both shoulders of buffalo rats. Established tumor mass implanted into liver of buffalo rats using intra-hepatic tumor injection. Two weeks later, {sup 123}I labelled IVDU, IVFRU(7.4 X 10{sup 7}Bq/200 {mu}l) injected intravenously into tail veins of each buffalo rats. Gamma camera used as revealing localization of {sup 123}I-IVDU, IVFRU in MCA-tk cells grafts rats and in vivo image was taken 2 hrs, 24 hrs after injection. radioiodinated IVDU, IVFRU were radiolabeled with {sup 123}I as labeling yield 70%, {sup 125}I as 84%. Two compounds showed minimal uptake in MCA cell line, but in MCA-tk cell line, increased uptake was observed. The ratio of MCA-tk to MCA was up to 116-fold in {sup 125}I-IVDU, up to 37-fold in {sup 125}I-IVFRU at 480 min. The uptake of IVDU was 4 times higher than IVFRU in MCA-tk cells. Gamma camera images of HSV-tk gene tranduced MCA tumor showed accumulation of {sup 123}I

  4. Preparation of optimized uranium and thorium bearing brabantite or monazite/brabantite solid solutions

    Energy Technology Data Exchange (ETDEWEB)

    Terra, O.; Dacheux, N.; Clavier, N. [Univ Paris 11, IPNO, Grp Radiochim, F-91406 Orsay, (France); Terra, O.; Audubert, F. [CEA Cadarache, DEN/DEC, F-13108 St Paul Les Durance, (France); Dacheux, N.; Clavier, N.; Podor, R. [ICMS UMR 5257, CNRS/CEA/UM2/ENSCM, F-30207 Bagnols Sur Ceze, (France); Podor, R. [Univ Nancy 1, LCSM, F-54506 Vandoeuvre Les Nancy, (France)

    2008-07-01

    The simultaneous incorporation of thorium and uranium(IV) in the rare-earth ortho-phosphates from a mixture of powdered AnO{sub 2}, (NH{sub 4})(H{sub 2}PO{sub 4}), and Ca(HPO{sub 4}).2H{sub 2}O was successfully performed, leading to the formation of single-phase Th-brabantite (Ca{sub 0.5}Th{sub 0.5}PO{sub 4}), U-brabantite (Ca{sub 0.5}U{sub 0.5}PO{sub 4}), and (Th,U)-brabantites (Ca{sub 0.5}Th{sub 0.5-y}U{sub y}PO{sub 4}). The repetition of several cycles composed of a grinding step (30 Hz, 15 min) and of a heat treatment (T=1200 degrees C, 10 h, Ar atmosphere) allowed preparation of single-phase and homogeneous compounds. The complete characterization of the samples by the means of X-Ray powder diffraction, electron probe micro-analyses, and {mu}-Raman spectrometry did not reveal either the presence of minor phases or the partial oxidation of uranium(IV) into uranyl. This study also evidenced the formation of a complete Ca{sub 0.5}Th{sub 0.5-y}U{sub y}PO{sub 4} solid solution with the associated linear decrease of a, b, and c unit cell parameters and beta increase versus the uranium mole loading. Even if the samples were found to be single phase, the significant improvement of the cation distribution in the materials was reached by the mean of the repetition of grinding/heating cycles. The same solid-state process was applied with success to the preparation of homogeneous and single-phase (Th,U)-monazite/brabantite solid solutions with general formula Ln{sub 1-2x}Ca{sub x}Th{sub x-y}U{sub y}PO{sub 4} (with 0.1 {<=} x {<=} 0.4 and y=x/5). (authors)

  5. Effect of hesperidin on mice bearing Ehrlich solid carcinoma maintained on doxorubicin.

    Science.gov (United States)

    Khedr, Naglaa F; Khalil, Rania M

    2015-12-01

    Doxorubicin (DOX) is widely used in cancer therapy of many carcinomas types. Unfortunately, DOX is not sufficiently effective in many cases, and increasing the dosage of it is limited due to its systemic toxicity. A citrus flavonoid hesperidin (HES) is proved to be potent antioxidant and protective agent against many diseases including cancer. In this context, the objective of this study was to examine effect of HES along with DOX on solid Ehrlich carcinoma (SEC) in mice. Forty male mice were divided into four equal groups (n = 10): control SEC, DOX, HES, and DOX + HES. HES (50 mg/kg body weight orally) was given day after day for 16 days along with DOX (4 mg/kg body weight i.p. injection) for 5 cycles every 4 days in ESC-inoculated mice. After 20 days, tumor volume, tumor weight, survival rate, tumor glutathione, nitric oxide content, and serum glutathione were determined. Tumor tissue was examined for histopathological and immunohistochemical study for p53 and VEGF. Tumor resistance for mdr1a gene was assessed in tumor tissue by RT-PCR. HES induced significant increase in tissue and serum glutathione with significant decrease in tumor volume and tumor weight. A possible role of HES to modulate gene expression of mdr1a in tumor tissue was established. In addition, HES alleviated the histopathological changes with significant decrease in p53 and VEGF expression. The use of HES as adjuvant therapy with DOX would enhance the therapeutic efficacy and alleviate the resistance to DOX in treatment of solid tumors.

  6. Oral ingestion of Streptococcus thermophilus does not affect mucositis severity or tumor progression in the tumor-bearing rat.

    Science.gov (United States)

    Tooley, Katie L; Howarth, Gordon S; Lymn, Kerry A; Lawrence, Andrew; Butler, Ross N

    2011-07-15

    Preventative or adjunctive agents for the amelioration of small intestinal chemotherapy-induced mucositis are not currently available for clinical use. We have previously demonstrated that oral ingestion of Streptococcus thermophilus (TH-4) partially attenuated chemotherapy-induced mucositis in the rat. Here we assess the effects of TH-4 on small intestinal damage and tumor progression in tumor-bearing rats with experimentally-induced mucositis. Female Dark Agouti tumor-bearing (mammary adenocarcinoma) rats (n = 36; 139 ± 1 g) had small intestinal damage induced via the administration of methotrexate (MTX). Rats were administered MTX; (1.5 mg/kg intramuscular) or saline at 0 and 24 h; with daily gavage administration of TH-4 (109 cfu/mL) or skim milk from -48 to +96 h post-MTX. Rats were allocated to groups (n=9): saline control, TH-4 control, MTX control or TH-4+MTX. The non-invasive ( 13) C-sucrose breath test (SBT) was conducted prior to tumor inoculation, pre-MTX (-24 h) and prior to sacrifice (96 h) to monitor gut function. At sacrifice small intestinal segments were excised and assessed for sucrase and myeloperoxidase activity as well as histological damage. Irrespective of TH-4 treatment, MTX-treated rats had a significant decrease in bodyweight, SBT levels, sucrase and myeloperoxidase activity, and histological damage score (p 0.05) but failed to alleviate mucositis indices. Although TH-4, at a dose of 109 cfu/mL, yielded neither protection nor amelioration of chemotherapy-induced mucositis, progression of mammary adenocarcinoma was unaffected.

  7. Plasma CRH response to water immersion-restraint stress in rats bearing a hypothalamic knife cut.

    Science.gov (United States)

    Nishioka, T; Iyota, K; Takao, T; Suemaru, S; Numata, Y; Hashimoto, K

    1994-08-01

    We reported earlier that the plasma level of corticotropin-releasing hormone (CRH) remained high 120 min after the onset of such strong sustained stress as ether-laparotomy or water immersion-restraint, which reflected the persistent secretion of CRH from the hypothalamic median eminence (ME). We investigated the change in plasma CRH during water immersion-restraint stress in rats bearing an anterolateral cut around the medial basal hypothalamus (MBH) which cuts the CRH neurons from the PVN to the ME. Concentrations of CRH in the hypothalamus, extrahypothalamic tissues and peripheral blood were measured by radioimmunoassay. Plasma ACTH was measured with an immunoradiometric assay kit. Plasma baseline ACTH and CRH concentrations did not differ significantly in the sham vs. cut groups. At 120 min after the onset of stress, plasma ACTH concentrations were definitely higher in both groups. In the cut group, plasma CRH at 120 min after stress did not differ significantly from the baseline level, whereas plasma CRH at 120 min was definitely higher in the sham group. Baseline CRH concentrations in the ME did not differ greatly in the two groups. CRH concentrations in the ME of both groups had decreased appreciably 120 min after the onset of stress as compared with baseline CRH, and the CRH decrease was greater in the cut group than in the sham group. CRH in the neurointermediate lobe (NIL) and adrenal gland of both groups showed no significant change at 120 min, compared with the control. These findings confirm that the continuous CRH increase in plasma during sustained stress is derived mainly from the hypothalamus.(ABSTRACT TRUNCATED AT 250 WORDS)

  8. Ambiguous effect of signals transmitted by the vagus nerve on fibrosarcoma incidence and survival of tumor-bearing rats.

    Science.gov (United States)

    Mikova, Lucia; Horvathova, Lubica; Ondicova, Katarina; Tillinger, Andrej; Vannucci, Luca E; Bizik, Jozef; Gidron, Yori; Mravec, Boris

    2015-04-23

    While the parasympathetic nervous system appears to be involved in the regulation of tumor progression, its exact role is still unclear. Therefore, using a rat BP6-TU2 fibrosarcoma tumor model, we investigated the effect of (1) reduction of vagal activity produced by subdiaphragmatic vagotomy; and (2) enhancement of vagal activity produced by continuous delivery of electric impulses to the cervical part of the vagus nerve on tumor development and survival of tumor-bearing rats. We also evaluated the expression of cholinergic receptors within in vitro cultivated BP6-TU2 cells. Interestingly, we found that both, vagal stimulation and subdiaphragmatic vagotomy slightly reduced tumor incidence. However, survival of tumor-bearing rats was not affected by any of the experimental approaches. Additionally, we detected mRNA expression of the α1, α2, α5, α7, and α10 subunits of nicotinic receptors and the M1, M3, M4, and M5 subtypes of muscarinic receptors within in vitro cultivated BP6-TU2 cells. Our data indicate that the role of the vagus nerve in modulation of fibrosarcoma development is ambiguous and uncertain and requires further investigation.

  9. Enhancement of survival of 9L gliosarcoma bearing rats following intracerebral delivery of drugs in combination with microbeam radiation therapy

    Energy Technology Data Exchange (ETDEWEB)

    Regnard, Pierrick [Biomedical Facility, 6, Rue Jules Horowitz, ESRF, BP220, F 38043 Grenoble (France); Braeuer-Krisch, Elke [Biomedical Beamline, ESRF, BP220, F 38043 Grenoble (France); Tropres, Irene [IFR1, Universite Joseph Fourier, 3T MRI unit, CHU A Michallon, BP217, F 38043 Grenoble (France); Keyrilaeinen, Jani; Bravin, Alberto [Biomedical Beamline, ESRF, BP220, F 38043 Grenoble (France); Le Duc, Geraldine [Biomedical Facility, 6, Rue Jules Horowitz, ESRF, BP220, F 38043 Grenoble (France)], E-mail: leduc@esrf.fr

    2008-12-15

    Microbeam radiation therapy (MRT) is a form of radiosurgery first dedicated to the treatment of brain tumors. It uses arrays of synchrotron generated X-rays microbeams of very high doses (typically 625 Gy). Microbeams are typically few micrometers large (25 {mu}m) and few hundred micrometers spaced (200 {mu}m). Previous experiments have shown that despite a good tumor eradication rate (5/11), a 100-{mu}m spacing unidirectional irradiation (skin dose 625 Gy, width 25 {mu}m) was too invasive for normal tissue. On the contrary, a 200-{mu}m spacing unidirectional irradiation preserved healthy tissue with a low tumor eradication rate (2/32). The purpose of this study was to enhance the potential of the 200 {mu}m spacing irradiation protocol. After diagnosis of the tumor by MRI, 9L tumor-bearing rats were laterally irradiated with 51 microbeams (625 Gy, 25 {mu}m, 200 {mu}m) 14 days after implantation. Three drugs (Gd-DTPA, CisPt, temozolomide) were tested, after intratumoral injection at the theoretical center of the tumor. Control rats displayed a median survival time of 19 days. There was no significant difference between drug-treated rats and control group. Irradiated animals showed an increase in life span (ILS) of 60.5%. Interestingly, the ILS increased to 131.6% and 1/6 rat survived more than 1 year in case of MRT combined with gadolinium injection. These results showed that the synergy between gadolinium injection (acting as a dose enhancer) and MRT improved significantly the life span of tumor bearing rats (more than a factor 2)

  10. Formulation of solid dispersion of rebamipide evaluated in a rat model for improved bioavailability and efficacy.

    Science.gov (United States)

    Tung, Nguyen-Thach; Park, Chun-Woong; Oh, Tack-oon; Kim, Ju-Young; Ha, Jung-Myung; Rhee, Yun-Seok; Park, Eun-Seok

    2011-12-01

    Rebamipide, a novel anti-ulcer agent, is listed in biopharmaceutics classification class IV because of its low aqueous solubility and permeability. Consequently, the bioavailability of rebamipide is under 10% in humans. The aim of this study was to increase the solubility and determine the effect of solubility enhancement on the bioavailability and efficacy of rebamipide (RBM). After taking into account the physiochemical properties of RBM (solubility, melting point, dosage etc.), solid dispersion was chosen as the solubility enhancement method. A rebamipide solid dispersion system containing the drug, l-lysine, PVP-VA 64 and poloxamer 407 was obtained from a spray-drying method. Solubility enhancement of RBM from the solid dispersion was determined by a dissolution test in 900 ml at pH 1.2. The bioavailability and efficacy of RBM solid dispersion were evaluated in a rat model. The aqueous solubility of RBM was improved 62.17 times by solid dispersion. The oral bioavailability of the drug was also increased 1.74-fold from solid dispersion compared with the reference product in a rat model. With regard to the anti-ulcer effect, the percentage inhibition of the solid dispersion was 2.71 times higher than that of the reference product in the ulcer-induced rat model. A solid dispersion of rebamipide was successfully formulated using the spray-drying method. Bioavailability and efficacy of rebamipide were increased significantly by solubility enhancement of the drug. © 2011 The Authors. JPP © 2011 Royal Pharmaceutical Society.

  11. Solid-state dependent dissolution and oral bioavailability of piroxicam in rats.

    Science.gov (United States)

    Lust, Andres; Laidmäe, Ivo; Palo, Mirja; Meos, Andres; Aaltonen, Jaakko; Veski, Peep; Heinämäki, Jyrki; Kogermann, Karin

    2013-01-23

    The aim of this study was to gain understanding about the effects of different solid-state forms of a poorly water-soluble piroxicam on drug dissolution and oral bioavailability in rats. Three different solid-state forms of piroxicam were studied: anhydrate I (AH), monohydrate (MH), and amorphous form in solid dispersion (SD). In addition, the effect of a new polymeric excipient Soluplus® (polyvinyl caprolactam-polyvinyl acetate-polyethylene glycol graft copolymer) on oral bioavailability of piroxicam was investigated. Significant differences in the dissolution and oral bioavailability were found between the solid-state forms of piroxicam. Amorphous piroxicam in SD showed the fastest dissolution in vitro and a solid-state transformation to MH in the dissolution medium. Despite the presence of solid-state transformation, SD exhibited the highest rate and extent of oral absorption in rats. Oral bioavailability of other two solid-state forms decreased in the order AH and MH. The use of Soluplus® was found to enhance the dissolution and oral bioavailability of piroxicam in rats. The present study shows the importance of solid-state form selection for oral bioavailability of a poorly water-soluble drug.

  12. Biodistribution and SPECT imaging of {sup 125/131}I-crotoxin on mice bearing Ehrlich solid tumour

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Marcella Araugio; Santos, Raquel Gouvea dos [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)], e-mail: marcellaaraugio@yahoo.com.br, e-mail: santosr@cdtn.br; Silveira, Marina B.; Simal, Carlos [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Faculdade de Medicina; Dias, Consuelo L. Fortes [Fundacao Ezequiel Dias (FUNED), Belo Horizonte, MG (Brazil)

    2009-07-01

    The search of specific radiopharmaceuticals to be used in breast tumour diagnosis is relevant to complement the techniques applied in conventional medicine. Crotalus durissus terrificus venom (CV) and its main polypeptide, Crotoxin (Crtx), are natural source of several bioactive substances with therapeutical potential. The aim of this work was to evaluate the binding of Crtx with tumour targets in vivo, as well as, evaluate its applicability for breast tumours diagnosis. Crtx was labelled with {sup 125/131}I using lactoperoxidase method and radiochemical analysis was performed by chromatography. {sup 125}I-Crtx was used for biodistribution and pharmacokinetics studies on swiss mice bearing Ehrlich solid tumour, while {sup 131}I-Crtx was used for single photon emission computed tomography (SPECT) imaging. Crtx presented specific binding sites on Ehrlich tumour cells and had a rapid blood clearance (T{sub 1/2}= 201.1 min.). Intratumoral administration increased significantly the activity delivered into the tumour site (128-fold higher) and reduced the kidney burden (7.2-fold lower). {sup 131}I-Crxt demonstrated to interact with tumour cells for until 72 hours allowing good quality images of tumour. Our results indicate the biotechnological potential of Crtx as template for radiopharmaceutical design for cancer diagnosis. (author)

  13. Participation of the NO/cGMP/K+ATP pathway in the antinociception induced by Walker tumor bearing in rats

    Directory of Open Access Journals (Sweden)

    A.L.R. Barbosa

    2012-06-01

    Full Text Available Implantation of Walker 256 tumor decreases acute systemic inflammation in rats. Inflammatory hyperalgesia is one of the most important events of acute inflammation. The L-arginine/NO/cGMP/K+ATP pathway has been proposed as the mechanism of peripheral antinociception mediated by several drugs and physical exercise. The objective of this study was to investigate a possible involvement of the NO/cGMP/K+ATP pathway in antinociception induced in Walker 256 tumor-bearing male Wistar rats (180-220 g. The groups consisted of 5-6 animals. Mechanical inflammatory hypernociception was evaluated using an electronic version of the von Frey test. Walker tumor (4th and 7th day post-implantation reduced prostaglandin E2- (PGE2, 400 ng/paw; 50 µL; intraplantar injection and carrageenan-induced hypernociception (500 µg/paw; 100 µL; intraplantar injection. Walker tumor-induced analgesia was reversed (99.3% for carrageenan and 77.2% for PGE2 by a selective inhibitor of nitric oxide synthase (L-NAME; 90 mg/kg, ip and L-arginine (200 mg/kg, ip, which prevented (80% for carrageenan and 65% for PGE2 the effect of L-NAME. Treatment with the soluble guanylyl cyclase inhibitor ODQ (100% for carrageenan and 95% for PGE2; 8 µg/paw and the ATP-sensitive K+ channel (KATP blocker glibenclamide (87.5% for carrageenan and 100% for PGE2; 160 µg/paw reversed the antinociceptive effect of tumor bearing in a statistically significant manner (P < 0.05. The present study confirmed an intrinsic peripheral antinociceptive effect of Walker tumor bearing in rats. This antinociceptive effect seemed to be mediated by activation of the NO/cGMP pathway followed by the opening of KATP channels.

  14. Rat fetal ventral mesencephalon grown as solid tissue cultures

    DEFF Research Database (Denmark)

    Höglinger, G U; Sautter, J; Meyer, Morten;

    1998-01-01

    Free-floating roller tube (FFRT) cultures of fetal rat and human nigral tissue are a means for tissue storage prior to grafting in experimental Parkinson's disease. In the present study, FFRT cultures prepared from embryonic-day-14 rat ventral mesencephalon were maintained for 4, 8, 12, or 16 days...

  15. Recuperative effect of Semecarpus anacardium linn. nut milk extract on carbohydrate metabolizing enzymes in experimental mammary carcinoma-bearing rats.

    Science.gov (United States)

    Sujatha, Venugopal; Sachdanandam, Panchanatham

    2002-03-01

    Semecarpus anacardium Linn. of the family Anacardiaceae has many applications in the Ayurvedic and Siddha systems of medicine. We have tested the antitumour activity of Semecarpus anacardium nut extract against experimental mammary carcinoma in animals. As there is a direct relationship between the proliferation of tumour cells and the activities of the glycolytic and gluconeogenic enzymes, we studied changes in the activities of enzymes involved in this metabolic pathway in the liver and kidney. The enzymes investigated were glycolytic enzymes, namely hexokinase, phosphoglucoisomerase, aldolase and the gluconeogenic enzymes, namely glucose-6-phosphatase and fructose-1,6-biphosphatase in experimental rats. A significant rise in glycolytic enzyme activities and a simultaneous fall in gluconeogenic enzyme activities were found in mammary carcinoma bearing rats. Drug administration returned these enzyme activities to their respective control activities. Copyright 2002 John Wiley & Sons, Ltd.

  16. Estrogen receptor binding radiopharmaceuticals: II. Tissue distribution of 17. cap alpha. -methylestradiol in normal and tumor-bearing rats

    Energy Technology Data Exchange (ETDEWEB)

    Feenstra, A.; Vaalburg, W.; Nolten, G.M.J.; Reiffers, S.; Talma, A.G.; Wiegman, T.; van der Molen, H.D.; Woldring, M.G.

    1983-06-01

    Tritiated 17..cap alpha..-methylestradiol was synthesized to investigate the potential of the carbon-11-labeled analog as an estrogen-receptor-binding radiopharmaceutical. In vitro, 17..cap alpha..-methylestradiol is bound with high affinity to the cytoplasmic estrogen receptor from rabbit uterus (K/sub d/ = 1.96 x 10/sup -10/M), and it sediments as an 8S hormone-receptor complex in sucrose gradients. The compound shows specific uptake in the uterus of the adult rat, within 1 h after injection. In female rats bearing DMBA-induced tumors, specific uterine and tumor uptakes were observed, although at 30 min the tumor uptake was only 23 to 30% of the uptake in the uterus. Tritiated 17..cap alpha..-methylestradiol with a specific activity of 6 Ci/mmole showed a similar tissue distribution. Our results indicate that a 17 ..cap alpha..-methylestradiol is promising as an estrogen-receptor-binding radiopharmaceutical.

  17. Celecoxib and Ibuprofen Restore the ATP Content and the Gluconeogenesis Activity in the Liver of Walker-256 Tumor-Bearing Rats

    Directory of Open Access Journals (Sweden)

    Camila Oliveira de Souza

    2015-07-01

    Full Text Available Background/Aims: The main purpose of this study was to investigate the effects of celecoxib and ibuprofen, both non-steroidal anti-inflammatory drugs (NSAIDs, on the decreased gluconeogenesis observed in liver of Walker-256 tumor-bearing rats. Methods: Celecoxib and ibuprofen (both at 25 mg/Kg were orally administered for 12 days, beginning on the same day when the rats were inoculated with Walker-256 tumor cells. Results: Celecoxib and ibuprofen treatment reversed the reduced production of glucose, pyruvate, lactate and urea from alanine as well as the reduced production of glucose from pyruvate and lactate in perfused liver from tumor-bearing rats. Besides, celecoxib and ibuprofen treatment restored the decreased ATP content, increased triacylglycerol levels and reduced mRNA expression of carnitine palmitoyl transferase 1 (CPT1, while ibuprofen treatment restored the reduced mRNA expression of peroxisome proliferator-activated receptor alpha (PPARα in the liver of tumor-bearing rats. Both treatments tended to decrease TNFα, IL6 and IL10 in the liver of tumor-bearing rats. Finally, the treatment with celecoxib, but not with ibuprofen, reduced the growth of Walker-256 tumor. Conclusion: Celecoxib and ibuprofen restored the decreased gluconeogenesis in the liver of Walker-256 tumor-bearing rats. These effects did not involve changes in tumor growth and probably occurred by anti-inflammatory properties of these NSAIDs, which increased expression of genes associated with fatty acid oxidation (PPARα and CPT1 and consequently the ATP production, normalizing the energy status in the liver of tumor-bearing rats.

  18. Bearing capacity of solid waste ground reinforced by stone column%用于垃圾土地基加固的碎石桩承载力

    Institute of Scientific and Technical Information of China (English)

    高海; 施建勇; 王蕊

    2011-01-01

    根据现有垃圾土地基碎石桩处理的试验,发现其破坏形式为桩体的侧向鼓胀;假设桩周垃圾土因桩的侧向鼓胀达到朗肯被动破坏状态,且不计地基垃圾土和桩身自重,由桩、桩周垃圾土的极限平衡,可以得到桩的极限承载力理论计算公式;依据已经进行的相关试验和参考资料确定公式中的计算参数,计算出桩的极限承载力;同时进行了桩身重型动力触探试验,可以由贯入击数推求承载力的特征值;经过理论计算与原位试验结果对比分析,两者比较接近.%Based on presented tests of improvement of solid waste ground by stone column, the failure mode of lateral expansion of column body can be found. It is assumed that solid waste surrounding column is in Rankin’s positive limit situation caused by lateral expansion of column body, self weight solid waste and column is neglected, the calculation theory of limit bearing capacity of stone column can be extended on equilibrium of solid waste and column. The limit bear capacity of stone column can be calculated on parameters by complete tests and reference data. The heavy dynamic penetration tests were finished in stone column and the characteristic value of bearing capacity can be recommended on blow count. It is shown that bearing capacities of calculation and field test are close.

  19. Diet-induced obesity and insulin resistance spur tumor growth and cancer cachexia in rats bearing the Yoshida sarcoma.

    Science.gov (United States)

    Honors, Mary Ann; Kinzig, Kimberly P

    2014-01-01

    Obesity and insulin resistance are associated with increased risk of cancer and cancer mortality. However, it is currently unknown whether they contribute to the development of cancer cachexia, a syndrome that contributes significantly to morbidity and mortality in individuals with cancer. The present experiment addresses the question of whether preexisting obesity and insulin resistance alter tumor growth and cancer cachexia symptoms in Yoshida sarcoma bearing male rats. Obesity and insulin resistance were induced through 5 weeks of high-fat (HF) diet feeding and insulin resistance was confirmed by intraperitoneal glucose tolerance testing. Chow-fed animals were used as a control group. Following the establishment of insulin resistance, HF- and chow-fed animals were implanted with fragments of the Yoshida sarcoma or received a sham surgery. Tumor growth rate was greater in HF-fed animals, resulting in larger tumors. In addition, cancer cachexia symptoms developed in HF-fed animals but not chow-fed animals during the 18-day experiment. These results support a stimulatory effect of obesity and insulin resistance on tumor growth and cancer cachexia development in Yoshida sarcoma-bearing rats. Future research should investigate the relationship between obesity, insulin resistance, and cancer cachexia in human subjects.

  20. Preparation, biodistribution and neurotoxicity of liposomal cisplatin following convection enhanced delivery in normal and F98 glioma bearing rats.

    Directory of Open Access Journals (Sweden)

    Tianyao Huo

    Full Text Available The purpose of this study was to evaluate two novel liposomal formulations of cisplatin as potential therapeutic agents for treatment of the F98 rat glioma. The first was a commercially produced agent, Lipoplatin™, which currently is in a Phase III clinical trial for treatment of non-small cell lung cancer (NSCLC. The second, produced in our laboratory, was based on the ability of cisplatin to form coordination complexes with lipid cholesteryl hemisuccinate (CHEMS. The in vitro tumoricidal activity of the former previously has been described in detail by other investigators. The CHEMS liposomal formulation had a Pt loading efficiency of 25% and showed more potent in vitro cytotoxicity against F98 glioma cells than free cisplatin at 24 h. In vivo CHEMS liposomes showed high retention at 24 h after intracerebral (i.c. convection enhanced delivery (CED to F98 glioma bearing rats. Neurotoxicologic studies were carried out in non-tumor bearing Fischer rats following i.c. CED of Lipoplatin™ or CHEMS liposomes or their "hollow" counterparts. Unexpectedly, Lipoplatin™ was highly neurotoxic when given i.c. by CED and resulted in death immediately following or within a few days after administration. Similarly "hollow" Lipoplatin™ liposomes showed similar neurotoxicity indicating that this was due to the liposomes themselves rather than the cisplatin. This was particularly surprising since Lipoplatin™ has been well tolerated when administered intravenously. In contrast, CHEMS liposomes and their "hollow" counterparts were clinically well tolerated. However, a variety of dose dependent neuropathologic changes from none to severe were seen at either 10 or 14 d following their administration. These findings suggest that further refinements in the design and formulation of cisplatin containing liposomes will be required before they can be administered i.c. by CED for the treatment of brain tumors and that a formulation that may be safe when given

  1. Preparation, biodistribution and neurotoxicity of liposomal cisplatin following convection enhanced delivery in normal and F98 glioma bearing rats.

    Science.gov (United States)

    Huo, Tianyao; Barth, Rolf F; Yang, Weilian; Nakkula, Robin J; Koynova, Rumiana; Tenchov, Boris; Chaudhury, Abhik Ray; Agius, Lawrence; Boulikas, Teni; Elleaume, Helene; Lee, Robert J

    2012-01-01

    The purpose of this study was to evaluate two novel liposomal formulations of cisplatin as potential therapeutic agents for treatment of the F98 rat glioma. The first was a commercially produced agent, Lipoplatin™, which currently is in a Phase III clinical trial for treatment of non-small cell lung cancer (NSCLC). The second, produced in our laboratory, was based on the ability of cisplatin to form coordination complexes with lipid cholesteryl hemisuccinate (CHEMS). The in vitro tumoricidal activity of the former previously has been described in detail by other investigators. The CHEMS liposomal formulation had a Pt loading efficiency of 25% and showed more potent in vitro cytotoxicity against F98 glioma cells than free cisplatin at 24 h. In vivo CHEMS liposomes showed high retention at 24 h after intracerebral (i.c.) convection enhanced delivery (CED) to F98 glioma bearing rats. Neurotoxicologic studies were carried out in non-tumor bearing Fischer rats following i.c. CED of Lipoplatin™ or CHEMS liposomes or their "hollow" counterparts. Unexpectedly, Lipoplatin™ was highly neurotoxic when given i.c. by CED and resulted in death immediately following or within a few days after administration. Similarly "hollow" Lipoplatin™ liposomes showed similar neurotoxicity indicating that this was due to the liposomes themselves rather than the cisplatin. This was particularly surprising since Lipoplatin™ has been well tolerated when administered intravenously. In contrast, CHEMS liposomes and their "hollow" counterparts were clinically well tolerated. However, a variety of dose dependent neuropathologic changes from none to severe were seen at either 10 or 14 d following their administration. These findings suggest that further refinements in the design and formulation of cisplatin containing liposomes will be required before they can be administered i.c. by CED for the treatment of brain tumors and that a formulation that may be safe when given systemically may be

  2. Influence of methionine/valine-depleted enteral nutrition on nucleic acid and protein metabolism in tumor-bearing rats

    Institute of Scientific and Technical Information of China (English)

    Yin-Cheng He; Jun Cao; Ji-Wei Chen; Ding-Yu Pan; Ya-Kui Zhou

    2003-01-01

    AIM: To investigate the effects of methionine/valine-depleted enteral nutrition (EN) on RNA, DNA and protein metabolism in tumor-bearing (TB) rats.METHODS: Sprague-Dawlley (SD) rats underwent jejunostomy for nutritional support. A suspension of Walker256 carcinosarcoma cells was subcutaneously inoculated.48 TB rats were randomly divided in 4 groups: A, B, C and D. The TB rats had respectively received jejunal feedings supplemented with balanced amino acids, methioninedepleted, balanced amino acids and valine-depleted for 6days before injection of 740 KBq 3H- methionine/valine via jejunum. The 3H incorporation rate of the radioactivity into RNA, DNA and proteins in tumor tissues at 0.5, 1, 2, 4 h postinjection of tracers was assessed with liquid scintillation counter.RESULTS: Incorporation of 3H into proteins in groups B and D was (0.500±0.020) % to (3.670±0.110) % and (0.708±0.019) % to (3.813±0.076) % respectively, lower than in groups A [(0.659±0.055) % to (4.492±0.108) %]and C r(0.805±0.098) % to (4.180±0.018) %]. Incorporation of 3H into RNA, DNA in group B was (0.237±0.075) %and (0.231±0.052) % respectively, lower than in group A (P<0.01). There was no significant difference in uptake of 3H by RNA and DNA between group C and D (P>0.05).CONCLUSION: Protein synthesis was inhibited by methionine/valine starvation in TB rats and nucleic acid synthesis was reduced after methionine depletion, thus resulting in suppression of tumor growth.

  3. Changes in red blood cell osmotic fragility induced by total plasma and plasma fractions obtained from rats bearing progressive and regressive variants of the Walker 256 tumor

    Directory of Open Access Journals (Sweden)

    Cavalcanti T.C.

    2003-01-01

    Full Text Available Two variants (A and B of the widely employed Walker 256 rat tumor cells are known. When inoculated sc, the A variant produces solid, invasive, highly metastasizing tumors that cause severe systemic effects and death. We have obtained a regressive variant (AR whose sc growth is slower, resulting in 70-80% regression followed by development of immunity against A and AR variants. Simultaneously with the beginning of tumor regression, a temporary anemia developed (~8 days duration, accompanied by marked splenomegaly (~300% and changes in red blood cell osmotic fragility, with mean corpuscular fragility increasing from 4.1 to 6.5 g/l NaCl. The possibility was raised that plasma factors associated with the immune response induced these changes. In the present study, we identify and compare the osmotic fragility increasing activity of plasma fractions obtained from A and AR tumor bearers at different stages of tumor development. The results showed that by day 4 compounds precipitating in 60% (NH42SO4 and able to increase red blood cell osmotic fragility appeared in the plasma of A and AR tumor bearers. Later, these compounds disappeared from the plasma of A tumor bearers but slightly increased in the plasma of AR tumor bearers. Furthermore, by day 10, compounds precipitating between 60 and 80% (NH42SO4 and with similar effects appeared only in plasma of AR tumor bearers. The salt solubility, production kinetics and hemolytic activity of these compounds resemble those of the immunoglobulins. This, together with their preferential increase in rats bearing the AR variant, suggest their association with an immune response against this tumor.

  4. Fractal dimension analysis of weight-bearing bones of rats during skeletal unloading

    Science.gov (United States)

    Pornprasertsuk, S.; Ludlow, J. B.; Webber, R. L.; Tyndall, D. A.; Sanhueza, A. I.; Yamauchi, M.

    2001-01-01

    Fractal analysis was used to quantify changes in trabecular bone induced through the use of a rat tail-suspension model to simulate microgravity-induced osteopenia. Fractal dimensions were estimated from digitized radiographs obtained from tail-suspended and ambulatory rats. Fifty 4-month-old male Sprague-Dawley rats were divided into groups of 24 ambulatory (control) and 26 suspended (test) animals. Rats of both groups were killed after periods of 1, 4, and 8 weeks. Femurs and tibiae were removed and radiographed with standard intraoral films and digitized using a flatbed scanner. Square regions of interest were cropped at proximal, middle, and distal areas of each bone. Fractal dimensions were estimated from slopes of regression lines fitted to circularly averaged plots of log power vs. log spatial frequency. The results showed that the computed fractal dimensions were significantly greater for images of trabecular bones from tail-suspended groups than for ambulatory groups (p fractal dimensions than other regions (p fractal analysis could be a useful technique to evaluate the structural changes of bone.

  5. TUMORICIDAL RESPONSE OF LIVER MACROPHAGES ISOLATED FROM RATS BEARING LIVER METASTASES OF COLON ADENOCARCINOMA

    NARCIS (Netherlands)

    THOMAS, C; NIJENHUIS, AM; DONTJE, B; DAEMEN, T; SCHERPHOF, GL

    1995-01-01

    Intraportal inoculation of CC531 adenocarcinoma cells into syngeneic rats causes an increase of liver macrophage cell number but not of major histocompatibility complex class II antigen expression. On day I after inoculation of 10(5) CC531 cells, a fixed number of isolated liver macrophages lysed si

  6. Focused ultrasound enhanced molecular imaging and gene therapy for multifusion reporter gene in glioma-bearing rat model.

    Science.gov (United States)

    Yang, Feng-Yi; Chang, Wen-Yuan; Lin, Wei-Ting; Hwang, Jeng-Jong; Chien, Yi-Chun; Wang, Hsin-Ell; Tsai, Min-Lan

    2015-11-03

    The ability to monitor the responses of and inhibit the growth of brain tumors during gene therapy has been severely limited due to the blood-brain barrier (BBB). A previous study has demonstrated the feasibility of noninvasive in vivo imaging with 123I-2'-fluoro-2'-deoxy-5-iodo-1-β-D-arabinofuranosyluracil (123I-FIAU) for monitoring herpes simplex virus type 1 thymidine kinase (HSV1-tk) cancer gene expression in an experimental animal model. Here, we tested the enhancement of SPECT with 123I-FIAU and ganciclovir (GCV) treatment in brain tumors after BBB disruption induced by focused ultrasound (FUS) in the presence of microbubbles. We established an orthotopic F98 glioma-bearing rat model with trifusion reporter genes. The results of this study showed that the rat model of HSV1-tk-expressing glioma cells could be successfully detected by SPECT imaging after FUS-induced BBB disruption on day 10 after implantation. Compared to the control group, animals receiving the GCV with or without sonication exhibited a significant antitumor activity (P therapy in brain diseases.

  7. Transient ischemic attack induced by melted solid lipid microparticles protects rat brains from permanent focal ischemia.

    Science.gov (United States)

    Tsai, M-J; Kuo, Y-M; Tsai, Y-H

    2014-09-01

    This study aims to develop a transient ischemic attack (TIA) model in conscious animals and uses this model to investigate the effect of TIA on subsequent permanent ischemia. TIA was induced by injecting designed temperature-sensitive melted solid lipid microparticles with a melting point around body temperature into male Wistar rats via arterial cannulation. Neurologic deficit was monitored immediately after the injection without anesthesia. According to the clinical definition of TIA, rats were divided into neurologic symptom durations ischemic stroke was induced 3d after the induction of TIA by injecting a different kind of embolic particle manufactured by blending chitin and PLGA. The ischemic stroke.

  8. The Effect of Weight-Bearing Exercise on the Strength of Femur Bone in Ovariectomized Rats

    Directory of Open Access Journals (Sweden)

    GH Sharifi

    2011-08-01

    Full Text Available Introduction & Objective: Fractures due to osteoporosis after menopause in women is widespread. Osteoporosis may occur in case of inadequate lack of physical activity .The aim of this study was to determine the effect of running training on femur bone strength in ovariectomized rats. Materials & Methods Forty matured Sprague Dawley rats were chosen for this study. A group of 10 were killed randomly to measure their initial femur strength. The remaining rats had ovarian surgery. After three months, in order to reach menopause period, they were randomly divided into 3 groups, including pre test, running training and control groups. The running training program was carried out for one hour a day, five days a week, for eight weeks. Femur bone strength was measured by HOUNSFIELD system. Data was analyzed by using one-way analysis of variance and dependent T- tests by the SPSS software. Results: Results of this study showed that ovariectomy leads to significant decrease of femur bone strength. On the other hand the eight weeks running training lead to significant increase of femur bone strength. Conclusion: The results of this study suggest that life style is important factors in preventing of osteoporosis and running training program had an inhibitory or reversal effect on decrease of menopause-induced femur bone strength.

  9. Body protein status in Fischer 344 rats bearing the MCA sarcoma

    Energy Technology Data Exchange (ETDEWEB)

    Radcliffe, J.D.

    1986-03-05

    The effect of a methylcholanthrene (MCA) sarcoma on the protein status of adult, male, Fischer-344 rats was investigated. Three groups of ten rats were used. One group (TB) was inoculated with MCA sarcoma tissue, control (C) and pair-fed (PF) groups received saline only. Rats were fed a purified (20% casein, 20% fat, 45% sucrose) diet from day 7 post-transplant, when tumors became palpable. Food intake of TB was depressed relative to C at day 15 PT. Animals were killed at day 22 PT. In comparison to C, tumor growth was associated with a decrease in gastrocnemius muscle protein content and an increase in spleen weight and protein content. There was no effect of tumor growth on the weight or protein content of liver, heart, or kidneys. Data from PF animals suggested that decreased gastrocnemius muscle protein content was partly attributable to decreased food intake and partly to tumor growth; the increased spleen protein was due to tumor growth per se. Thus, growth of the MCA sarcoma affects host protein status. Some of these effects are caused partly by hypophagia and partly by tumor growth and others are due to tumor growth per se.

  10. Decreased response to cAMP in the glucose and glycogen catabolism in perfused livers of Walker-256 tumor-bearing rats.

    Science.gov (United States)

    de Morais, Hely; Cassola, Priscila; Moreira, Carolina Campos Lima; Bôas, Suéllen Kathiane Fernandes Vilas; Borba-Murad, Glaucia Regina; Bazotte, Roberto Barbosa; de Souza, Helenir Medri

    2012-09-01

    The hepatic response to cyclic adenosine monophosphate (cAMP) and N6-monobutyryl-cAMP (N6-MB-cAMP) in the glucose and glycogen catabolism and hepatic glycogen levels were evaluated in Walker-256 tumor-bearing rats, on days 5 (WK5), 8 (WK8), and 11 (WK11) after the implantation of tumor. Rats without tumor fed ad libitum (fed control rats) or that received the same daily amount of food ingested by anorexics tumor-bearing rats (pair-fed control rats) or 24 h fasted (fasted control rats) were used as controls. Glucose and glycogen catabolism were measured in perfused liver. Hepatic glycogen levels were lower (p catabolism was lower (p catabolism, under condition of depletion of hepatic glycogen (24 h fast), was lower (p catabolism was lower (p catabolism in various stages of tumor development (days 5, 8 and 11), which was probably not due to the lower hepatic glycogen levels nor due to the increased activity of PDE3B.

  11. Tumor radio-sensitivity assessment by means of volume data and magnetic resonance indices measured on prostate tumor bearing rats.

    Science.gov (United States)

    Belfatto, Antonella; White, Derek A; Mason, Ralph P; Zhang, Zhang; Stojadinovic, Strahinja; Baroni, Guido; Cerveri, Pietro

    2016-03-01

    Radiation therapy is one of the most common treatments in the fight against prostate cancer, since it is used to control the tumor (early stages), to slow its progression, and even to control pain (metastasis). Although many factors (e.g., tumor oxygenation) are known to influence treatment efficacy, radiotherapy doses and fractionation schedules are often prescribed according to the principle "one-fits-all," with little personalization. Therefore, the authors aim at predicting the outcome of radiation therapy a priori starting from morphologic and functional information to move a step forward in the treatment customization. The authors propose a two-step protocol to predict the effects of radiation therapy on individual basis. First, one macroscopic mathematical model of tumor evolution was trained on tumor volume progression, measured by caliper, of eighteen Dunning R3327-AT1 bearing rats. Nine rats inhaled 100% O2 during irradiation (oxy), while the others were allowed to breathe air. Second, a supervised learning of the weight and biases of two feedforward neural networks was performed to predict the radio-sensitivity (target) from the initial volume and oxygenation-related information (inputs) for each rat group (air and oxygen breathing). To this purpose, four MRI-based indices related to blood and tissue oxygenation were computed, namely, the variation of signal intensity ΔSI in interleaved blood oxygen level dependent and tissue oxygen level dependent (IBT) sequences as well as changes in longitudinal ΔR1 and transverse ΔR2(*) relaxation rates. An inverse correlation of the radio-sensitivity parameter, assessed by the model, was found with respect the ΔR2(*) (-0.65) for the oxy group. A further subdivision according to positive and negative values of ΔR2(*) showed a larger average radio-sensitivity for the oxy rats with ΔR2(*)<0 and a significant difference in the two distributions (p < 0.05). Finally, a leave-one-out procedure yielded a radio

  12. Apoptosis in glioma-bearing rats after neural stem cell transplantation

    Institute of Scientific and Technical Information of China (English)

    Hua Li; Zhenjun Chen; Shaopeng Zhou

    2013-01-01

    Abnormal activation of the Ras/Raf/Mek/Erk signaling cascade plays an important role in glioma. Inhibition of this aberrant activity could effectively hinder glioma cel proliferation and promote cell apoptosis. To investigate the mechanism of glioblastoma treatment by neural stem cel trans-plantation with respect to the Ras/Raf/Mek/Erk pathway, C6 glioma cel s were prepared in sus-pension and then infused into the rat brain to establish a glioblastoma model. Neural stem cells isolated from fetal rats were then injected into the brain of this glioblastoma model. Results showed that Raf-1, Erk and Bcl-2 protein expression significantly increased, while Caspase-3 protein expression decreased. After transplantation of neural stem cells, Raf-1, Erk and Bcl-2 protein expression significantly decreased, while Caspase-3 protein expression significantly in-creased. Our findings indicate that transplantation of neural stem cel s may promote apoptosis of glioma cells by inhibiting Ras/Raf/Mek/Erk signaling, and thus may represent a novel treatment approach for glioblastoma.

  13. The interplay of hydrogen bonds in the solid state structure of NH-pyrazoles bearing cyano and amino substituents

    Science.gov (United States)

    Emelina, Elena E.; Petrov, Alexander A.; Borissova, Alexandra O.; Filyukov, Dmitriy V.; Antipin, Mikhail Yu.

    2012-04-01

    The annular tautomeric equilibrium of two 4-cyano-3(5)-aminopyrazoles having hydrogen atom or methyl group in position 5(3) was studied by X-ray crystallography for the solid compounds and by DFT B3LYP/6-31G** and CBS-QB3 calculations for the free molecules. The 3-amino tautomer was found to be the more favorable form for the free molecules and the sole form in the solid state.

  14. The ghrelin receptor agonist HM01 mimics the neuronal effects of ghrelin in the arcuate nucleus and attenuates anorexia-cachexia syndrome in tumor-bearing rats.

    Science.gov (United States)

    Borner, Tito; Loi, Laura; Pietra, Claudio; Giuliano, Claudio; Lutz, Thomas A; Riediger, Thomas

    2016-07-01

    The gastric hormone ghrelin positively affects energy balance by increasing food intake and reducing energy expenditure. Ghrelin mimetics are a possible treatment against cancer anorexia-cachexia syndrome (CACS). This study aimed to characterize the action of the nonpeptidergic ghrelin receptor agonist HM01 on neuronal function, energy homeostasis and muscle mass in healthy rats and to evaluate its possible usefulness for the treatment of CACS in a rat tumor model. Using extracellular single-unit recordings, we tested whether HM01 mimics the effects of ghrelin on neuronal activity in the arcuate nucleus (Arc). Furthermore, we assessed the effect of chronic HM01 treatment on food intake (FI), body weight (BW), lean and fat volumes, and muscle mass in healthy rats. Using a hepatoma model, we investigated the possible beneficial effects of HM01 on tumor-induced anorexia, BW loss, muscle wasting, and metabolic rate. HM01 (10(-7)-10(-6) M) mimicked the effect of ghrelin (10(-8) M) by increasing the firing rate in 76% of Arc neurons. HM01 delivered chronically for 12 days via osmotic minipumps (50 μg/h) increased FI in healthy rats by 24%, paralleled by increased BW, higher fat and lean volumes, and higher muscle mass. Tumor-bearing rats treated with HM01 had 30% higher FI than tumor-bearing controls and were protected against BW loss. HM01 treatment resulted in higher muscle mass and fat mass. Moreover, tumor-bearing rats reduced their metabolic rate following HM01 treatment. Our studies substantiate the possible therapeutic usefulness of ghrelin receptor agonists like HM01 for the treatment of CACS and possibly other forms of disease-related anorexia and cachexia.

  15. Anticancer effects on leiomyosarcoma-bearing Wistar rats after electromagnetic radiation of resonant radiofrequencies.

    Science.gov (United States)

    Avdikos, Antonios; Karkabounas, Spyridon; Metsios, Apostolos; Kostoula, Olga; Havelas, Konstantinos; Binolis, Jayne; Verginadis, Ioannis; Hatziaivazis, George; Simos, Ioannis; Evangelou, Angelos

    2007-01-01

    In the present study, the effects of a resonant low intensity static electromagnetic field (EMF), causing no thermal effects, on Wistar rats have been investigated. Sarcoma cell lines were isolated from leiomyosarcoma tumors induced in Wistar rats by the subcutaneous (s.c) injection of 3,4-benzopyrene. Furthermore, smooth muscle cells (SMC) were isolated from the aorta of Wistar rats and cultivated. Either leiomyosarcoma cells (LSC) or SMC were used to record a number of characteristic resonant radiofrequencies, in order to determine the specific electromagnetic fingerprint spectrum for each cell line. These spectra were used to compose an appropriate algorithm, which transforms the recorded radiofrequencies to emitted ones. The isolated LSC were cultured and then exposed to a resonant low intensity radiofrequency EMF (RF-EMF), at frequencies between 10 kHz to 120 kHz of the radiowave spectrum. The exposure lasted 45 consecutive minutes daily, for two consecutive days. Three months old female Wistar rats were inoculated with exposed and non-exposed to EMF LSC (4 x 10(6) LCS for animal). Inoculated with non-exposed to EMF cells animals were then randomly separated into three Groups. The first Group was sham exposed to the resonant EMF (control Group-CG), the second Group after the inoculation of LSC and appearance of a palpable tumor mass, was exposed to a non-resonant EMF radiation pattern, for 5 h per day till death of all animals (experimental control Group-ECG). The third Group of animals after inoculation of LSC and the appearance of a palpable tumor mass, was exposed to the resonant EMF radiation for 5 h per day, for a maximum of 60 days (experimental Group-I, EG-I). A fourth Group of animals was inoculated with LSC exposed to EMF irradiation and were not further exposed to irradiation (experimental Group-II, EG-II). Tumor induction was 100% in all Groups studied and all tumors were histologically identified as leiomyosarcomas. In the case of the EG-I, a

  16. Evaluation of 188Re-labeled PEGylated nanoliposome as a radionuclide therapeutic agent in an orthotopic glioma-bearing rat model

    Directory of Open Access Journals (Sweden)

    Huang FYJ

    2015-01-01

    Full Text Available Feng-Yun J Huang,1 Te-Wei Lee,2 Chih-Hsien Chang,2 Liang-Cheng Chen,2 Wei-Hsin Hsu,2 Chien-Wen Chang,1 Jem-Mau Lo1 1Department of Biomedical Engineering and Environmental Sciences, National Tsing Hua University, Hsinchu, Taiwan; 2Institute of Nuclear Energy Research, Longtan, Taiwan Purpose: In this study, the 188Re-labeled PEGylated nanoliposome (188Re-liposome was prepared and evaluated as a therapeutic agent for glioma.Materials and methods: The reporter cell line, F98luc was prepared via Lentivector expression kit system and used to set up the orthotopic glioma-bearing rat model for non-invasive bioluminescent imaging. The maximum tolerated dose applicable in Fischer344 rats was explored via body weight monitoring of the rats after single intravenous injection of 188Re-liposome with varying dosages before the treatment study. The OLINDA/EXM 1.1 software was utilized for estimating the radiation dosimetry. To assess the therapeutic efficacy, tumor-bearing rats were intravenously administered 188Re-liposome or normal saline followed by monitoring of the tumor growth and animal survival time. In addition, the histopathological examinations of tumors were conducted on the 188Re-liposome-treated rats.Results: By using bioluminescent imaging, the well-established reporter cell line (F98luc showed a high relationship between cell number and its bioluminescent intensity (R2=0.99 in vitro; furthermore, it could also provide clear tumor imaging for monitoring tumor growth in vivo. The maximum tolerated dose of 188Re-liposome in Fischer344 rats was estimated to be 333 MBq. According to the dosimetry results, higher equivalent doses were observed in spleen and kidneys while very less were in normal brain, red marrow, and thyroid. For therapeutic efficacy study, the progression of tumor growth in terms of tumor volume and/or tumor weight was significantly slower for the 188Re-liposome-treated group than the control group (P<0.05. As a result, the

  17. Feasibility of synchrotron radiation computed tomography on rats bearing glioma after iodine or gadolinium injection. Jeune Equipe RSRM-UJF.

    Science.gov (United States)

    Le Duc, G; Corde, S; Elleaume, H; Estève, F; Charvet, A M; Brochard, T; Fiedler, S; Collomb, A; Le Bas, J F

    2000-01-01

    The purpose of this work was to demonstrate the feasibility of a new imaging technique called synchrotron radiation computed tomography (SRCT). This technique leads to a direct assessment of the in vivo concentration of an iodine- or gadolinium-labeled compound. Rats bearing C6 glioma were imaged by MRI prior to the SRCT experiment. The SRCT experiments were performed after a 1.3 g I/kg (n = 5) or a 0.4 g Gd/kg (n = 5) injection. Finally, brains were sampled for histology. The SRCT images exhibited contrast enhancement at the tumor location. Ten minutes after injection, iodine and gadolinium tissular concentrations were equal to 0.80 ( +/- 0.40) mg/cm3 and 0.50 ( +/- 0.10) mg/cm3, respectively in the peripheral area of the tumor (respective background value: 0.20 +/- 0.02 to 0.10 +/- 0.01). Correlation to MRI and histology revealed that the contrast uptake occurred in the most vascularized area of the tumor. The present study summarizes the feasibility of in vivo SRCT to obtain quantitative information about iodine and gadolinium-labeled compounds. Beyond brain tumor pathology, the SRCT appears as a complementary approach to MRI and CT, for studying iodine- and gadolinium-labeled compounds by the direct achievement of the tissular concentration value in the tissue.

  18. Porous polymers bearing functional quaternary ammonium salts as efficient solid catalysts for the fixation of CO2 into cyclic carbonates

    Science.gov (United States)

    Cai, Sheng; Zhu, Dongliang; Zou, Yan; Zhao, Jing

    2016-07-01

    A series of porous polymers bearing functional quaternary ammonium salts were solvothermally synthesized through the free radical copolymerization of divinylbenzene (DVB) and functionalized quaternary ammonium salts. The obtained polymers feature highly cross-linked matrices, large surface areas, and abundant halogen anions. These polymers were evaluated as heterogeneous catalysts for the synthesis of cyclic carbonates from epoxides and CO2 in the absence of co-catalysts and solvents. The results revealed that the synergistic effect between the functional hydroxyl groups and the halide anion Br- afforded excellent catalytic activity to cyclic carbonates. In addition, the catalyst can be easily recovered and reused for at least five cycles without significant loss in activity.

  19. Modulation of lipid peroxidation and antioxidant status upon administration of 'Shemamruthaa' in 7,12-dimethylbenz[a]anthracene induced mammary carcinoma bearing rats

    Institute of Scientific and Technical Information of China (English)

    Ayyakkannu Purushothaman; Elumalai Nandhakumar; Panchanatham Sachdanandam

    2012-01-01

    Objective: To investigate the therapeutic efficacy of a Shemamruthaa (SM), (combination of Hibiscus rosasinensis (H. rosasinensis) flowers, fruits of Phyllanthus emblica (P. emblica) and pure honey in definite ratio), against lipid peroxidation (LPO) and antioxidant status in experimentally induced mammary carcinoma rats. Methods: Adult female Sprague-Dawley rats were used for the study and were divided into four groups. Group I control animals received standard pellet diet and water ad libitum. Group II rats were induced with 7,12-dimethyl benz[a]anthracene (DMBA) (25 mg in 1 mL olive oil) by gastric intubation, whereas another set of DMBA-induced rats were treated with SM (400 mg/kg body weight/d) in olive oil orally by gastric intubation for 14 d after 3 months of induction period (group III). Group IV rats served as SM-treated control animals. At the end of the experimental period, the rats were anaesthetised and sacrificed and used for biochemical measures and histology studies. Results: The LPO was increased and antioxidant levels were decreased in the serum, liver and mammary tissues of cancer-induced rats. The administration of SM drug significantly (P<0.05) decreased LPO and reversed the status of antioxidants to near normal level in cancer-bearing animals. Conclusions: The results obtained indicate the additive and synergistic action of constituents’ plants in the SM drug against oxidative damage and its protective role in DMBA induced mammary cancer.

  20. Solid-state structures of peapod bearings composed of finite single-wall carbon nanotube and fullerene molecules.

    Science.gov (United States)

    Sato, Sota; Yamasaki, Takashi; Isobe, Hiroyuki

    2014-06-10

    A supramolecular combination of carbon nanotube and fullerene, so-called a peapod, has attracted much interest, not solely because of its physical properties but also for its unique assembled structures of carbonaceous entities. However, the detailed structural information available was not sufficient for in-depth understanding of its structural chemistry or for exploratory research inspired by novel physical phenomena, mainly because of the severely inhomogeneous nature of currently available carbon nanotubes. We herein report solid-state structures of a molecular peapod. This structure, solved with a belt-persistent finite carbon nanotube molecule at the atomic level by synchrotron X-ray diffraction, revealed the presence of a smooth, inflection-free Hirshfeld surface inside the tube, and the smoothness permitted dynamic motion of the C60 guest molecule even in the solid state. This precise structural information may inspire the molecular design of carbonaceous machines assembled purely through van der Waals contacts between two neutral molecules.

  1. Growth delay effect of combined interstitial hyperthermia and brachytherapy in a rat solid tumor model.

    Science.gov (United States)

    Papadopoulos, D; Kimler, B F; Estes, N C; Durham, F J

    1989-01-01

    The rat mammary AC33 solid tumor model was used to investigate the efficacy of interstitial hyperthermia and/or brachytherapy. Subcutaneous flank tumors were heated with an interstitial microwave (915 MHz) antenna to a temperature of 43 +/- 0.5 degrees C for 45 min for two treatments, three days apart, and/or implanted with Ir-192 seeds for three days (-25 Gy tumor dose). Following treatments, tumors were measured 2 to 3 times per week. Hyperthermia alone produced a modest delay in tumor volume regrowth, while brachytherapy was substantially more effective. The combination produced a improvement in tumor regrowth delay compared to brachytherapy alone.

  2. Trace element-bearing phases during the solid transport: in-situ characterization and temporal variability in the Loire bed-sediments (France)

    Science.gov (United States)

    Grosbois, Cécile; Courtin-Nomade, Alexandra; Dhivert, Elie; Desmet, Marc; Kunz, Martin

    2013-04-01

    As a result of increased of agriculture, land use, urban areas, industry, traffic and population density, trace element inputs have altered considerably fluvial system (sediment, water quality and biota). The Loire River Basin (117,800 km2, total population of 8.4 Mp in 2010), even if it is considered one of the least human-impacted hydrosystem among the 5 large French basins, has been exposed to multiple sources of metals during the last 150 years, originating from major mining districts (coal and non-ferrous metals) and their associated industrial activities (Grosbois et al, 2012; Dhivert et al, 2013). Two major contamination periods were recorded in several core sediments throughout the basin: urban development of the basin. The limited dilution by detrital material (Loire sediment load between1.5 and 3.5 Mt/y) was an additional cause of such severe contamination. After 1950, river eutrophication was well-marked by the general increase of endogenic calcite in the mid and downstream part of the basin, slightly diluting all major and trace element bulk concentrations by 20% (Grosbois et al, 2012). Since 1980, a generalized and gradual decontamination of bed sediments started while mines were gradually closing, urban waste waters collected and treated in addition to new environmental regulations. They aim to limit metallic pollutant dispersion like industrial recycling of metal wastes and to reduce atmospheric emissions and consequently atmospheric fall out wet and dry deposition In-situ chemical and mineralogical techniques (EPMA, SEM-EDS/ACC system and synchrotron based µXRD) were used (i) to highlight anthropogenic activities by a specific mineralogical signature and (ii) to determine potential effects of post-depositional remobilization and access trace element mobility during the solid transport. Trace element-bearing phases were identified at a micron scale during both <1900-1950 and 1950-1980 contamination periods with respect to maximum contamination peaks

  3. [Application of solid sampling graphite furnace atomic absorption spectrophotometry to mensuration of brain iron content in rats].

    Science.gov (United States)

    Zhang, Nan; Sheng, Qing-hai; Shi, Zhen-hua; Zhang, Zhi-guo; Duan, Xiang-lin; Chang, Yan-zhong

    2009-04-01

    In the present study, the authors performed the solid sampling and detected the iron levels in cortex, hippocampus and striatum of rat brain by GFAAS. The authors' results showed that there are no remarkable difference between the data obtained by solid sampling graphite furnace atomic absorption and liquid sampling graphite furnace atomic absorption. Compared to liquid sampling graphite furnace atomic absorption, the sample pre-treatment stage was obviously simplified, the cost was reduced significantly, and the time was shortened significantly in the solid sampling GFAAS. This study will be beneficial to the mensuration of iron content in micro-tissue of animal by solid sampling GFASS.

  4. Characteristics of brain injury induced by shock wave propagation in solids after underwater explosion in rats

    Directory of Open Access Journals (Sweden)

    Xin-ling LI

    2016-09-01

    Full Text Available Objective  To observe the characteristics of rat brain injury induced by shock wave propagation in solids resulting from underwater explosion and explore the related mechanism. Methods  Explosion source outside the simulated ship cabin underwater was detonated for establishing a model of brain injury in rats by shock wave propagation in solid; 72 male SD rats were randomly divided into normal control group (n=8, injury group 1 (600mg RDX paper particle explosion source, n=32, injury group 2 (800mg RDX paper particle explosion source, n=32. The each injury group was randomly divided into 4 subgroups (n=8, 3, 6, 24 and 72h groups. The division plate as a whole and the head of 8 rats in each injury group were measured for the peak value of the solid shock wave, its rising time and the duration time of shock wave propagation in solid. To observe the physiological changes of animals after injury, plasma samples were collected for determination of brain damage markers, NSE and S-100β. All the animals were sacrificed, the right hemisphere of the brain was taken in each group of animals, weighting after baking, and the brain water content was calculated. Pathological examination was performed for left cerebral hemisphere in 24-h group. The normal pyramidal cells in the hippocampal CA1 region were counted. Results  The peak value, rising time and duration time of shock wave propagation on the division plate and head were 1369.74±91.70g, 0.317±0.037ms and 24.85±2.53ms, 26.83±3.09g, 0.901±0.077ms and 104.21±6.26ms respectively in injury group 1, 1850.11±83.86g, 0.184±0.031ms and 35.61±2.66ms, 39.75±3.14g, 0.607±0.069ms and 132.44±7.17ms in injury group 2 (P<0.01. After the injury, there was no abnormality in the anatomy, and brain damage markers NSE, S-100β increased, reached the peak at 24 h, and they were highest in injury group 2 and lowest in control group with a statistically significant difference (P<0.05. The brain water content

  5. Effective immobilisation of a metathesis catalyst bearing an ammonium-tagged NHC ligand on various solid supports

    Directory of Open Access Journals (Sweden)

    Krzysztof Skowerski

    2016-01-01

    Full Text Available An ammonium-tagged ruthenium complex, 8, was deposited on several widely available commercial solid materials such as silica gel, alumina, cotton, filter paper, iron powder or palladium on carbon. The resulting catalysts were tested in toluene or ethyl acetate, and found to afford metathesis products in high yield and with extremely low ruthenium contamination. Depending on the support used, immobilised catalyst 8 shows also additional traits, such as the possibility of being magnetically separated or the use for metathesis and subsequent reduction of the obtained double bond in one pot.

  6. Solid-state phosphorescence of trans-bis(salicylaldiminato)platinum(II) complexes bearing long alkyl chains: morphology control towards intense emission.

    Science.gov (United States)

    Komiya, Naruyoshi; Itami, Nao; Naota, Takeshi

    2013-07-15

    Morphology control for intense solid-state phosphorescence of non-emissive, but potentially emissive crystals of platinum complexes and the mechanistic rationale are described. A series of trans-bis(salicylaldiminato)platinum(II) complexes bearing linear alkyl chains (1a: n=5; 1b: n=8; 1c: n=12; 1d: n=14; 1e: n=16; 1f: n=18) was synthesized and the solid-state emission properties were examined by using crystals/aggregates prepared under various precipitation conditions. Crystals of 1e, prepared using "kinetic" conditions including rapid cooling, high concentrations, and poor solvents, emit intensive yellow phosphorescence (λ(max)=545 nm) under UV irradiation at 298 K with an absolute quantum efficiency of 0.36, whereas all the crystals of 1a-1f prepared using "thermodynamic" conditions including slow cooling, low concentrations, and good solvents were either non- or less emissive with Φ(298K) values of 0.12 (1a), 0.11 (1b), 0.10 (1c), 0.07 (1d), 0.02 (1e), and 0.02 (1f) under the same measurement conditions. The amorphous solid 1e, prepared by rapid cooling and freeze-drying, was also non-emissive (Φ(298K)=0.02, 0.02). Temperature-dependent emission spectra showed that the kinetic crystals of 1e exhibit high heat-resistance towards emission decay with increasing temperature, whereas the amorphous solid 1e is entirely heat-quenchable. This is a rare example of the change from a non-emissive crystal into a highly emissive crystal by morphology control through crystal engineering. Emission spectra and powder X-ray diffraction (XRD) patterns of the emissive, kinetic crystals of 1e are clearly distinct from those of the less emissive, thermodynamic crystals of 1a-1f. Single-crystal XRD unequivocally establishes that the thermodynamic crystals of 1d have a multilayered lamellar structure supported by highly regulated, consecutive π-stacking interactions between imine moieties, whereas the kinetic crystals of 1e have a face-to-edge lamellar structure with less

  7. Participation of the NO/cGMP/K{sup +}ATP pathway in the antinociception induced by Walker tumor bearing in rats

    Energy Technology Data Exchange (ETDEWEB)

    Barbosa, A.L.R.; Pinheiro, C.A.; Oliveira, G.J.; Torres, J.N.L.; Moraes, M.O.; Ribeiro, R.A.; Vale, M.L.; Souza, M.H.L.P. [Departamento de Fisiologia e Farmacologia, Faculdade de Medicina, Universidade Federal do Ceará, Fortaleza, CE (Brazil)

    2012-03-30

    Implantation of Walker 256 tumor decreases acute systemic inflammation in rats. Inflammatory hyperalgesia is one of the most important events of acute inflammation. The L-arginine/NO/cGMP/K{sup +}ATP pathway has been proposed as the mechanism of peripheral antinociception mediated by several drugs and physical exercise. The objective of this study was to investigate a possible involvement of the NO/cGMP/K{sup +}ATP pathway in antinociception induced in Walker 256 tumor-bearing male Wistar rats (180-220 g). The groups consisted of 5-6 animals. Mechanical inflammatory hypernociception was evaluated using an electronic version of the von Frey test. Walker tumor (4th and 7th day post-implantation) reduced prostaglandin E{sub 2}- (PGE{sub 2}, 400 ng/paw; 50 µL; intraplantar injection) and carrageenan-induced hypernociception (500 µg/paw; 100 µL; intraplantar injection). Walker tumor-induced analgesia was reversed (99.3% for carrageenan and 77.2% for PGE{sub 2}) by a selective inhibitor of nitric oxide synthase (L-NAME; 90 mg/kg, ip) and L-arginine (200 mg/kg, ip), which prevented (80% for carrageenan and 65% for PGE{sub 2}) the effect of L-NAME. Treatment with the soluble guanylyl cyclase inhibitor ODQ (100% for carrageenan and 95% for PGE{sub 2}; 8 µg/paw) and the ATP-sensitive K{sup +} channel (KATP) blocker glibenclamide (87.5% for carrageenan and 100% for PGE{sub 2}; 160 µg/paw) reversed the antinociceptive effect of tumor bearing in a statistically significant manner (P < 0.05). The present study confirmed an intrinsic peripheral antinociceptive effect of Walker tumor bearing in rats. This antinociceptive effect seemed to be mediated by activation of the NO/cGMP pathway followed by the opening of KATP channels.

  8. Mineralogical characterization of municipal solid waste incineration bottom ash with an emphasis on heavy metal-bearing phases.

    Science.gov (United States)

    Wei, Yunmei; Shimaoka, Takayuki; Saffarzadeh, Amirhomayoun; Takahashi, Fumitake

    2011-03-15

    Municipal solid waste incineration (MSWI) bottom ash contains a considerable amount of heavy metals. The occurrence and uneven distribution of these heavy metals in bottom ash can increase the complexity of such residues in terms of long-term behavior upon landfilling or recycling. Bottom ashes sampled from three stoker-type incinerators in Japan were analyzed in this paper. This study presents detailed information on the mineralogical characterization of bottom ash constituents and the weathering behavior of these constituents by means of optical microscopy and scanning electron microscopy. It was revealed that bottom ash mainly consists of assorted silicate-based glass phases (48-54 wt% of ash) and mineral phases including melilites, pseudowollastonite, spinels, and metallic inclusions (Fe-P, Fe-S, Fe-Cu, Cu-Sn, Cu-Zn, Cu-S, and Cu-Pb dominated phases), as melt products formed during the incineration process. The compounds embedded in the glass matrix, e.g. spinels and metallic inclusions, played the most important role in concentration of heavy metals (Pb, Zn, Cu, Cr, Mn, Ni, etc.). Other phases such as refractory minerals and ceramics, frequently found in ash, were of less significance in terms of their influence on the involvement of heavy metals. Analysis of lab-scale artificially weathered and 10-year landfilled bottom ash samples revealed that secondary mineralization/alteration of the bottom ash constituents principally carbonation and glass evolution substantially decreased the potential risk of the heavy metals to the surrounding environment. Copyright © 2011 Elsevier B.V. All rights reserved.

  9. Desvenlafaxine succinate ameliorates visceral hypersensitivity but delays solid gastric emptying in rats.

    Science.gov (United States)

    Dai, Fei; Lei, Yong; Li, Shiying; Song, Gengqing; Chen, Jiande D Z

    2013-08-15

    Desvenlafaxine succinate (DVS) is a novel serotonin and norepinephrine reuptake inhibitor. The aim of this study was to investigate the effects of DVS on visceral hypersensitivity and solid gastric emptying in a rodent model of gastric hyperalgesia. Twenty-eight gastric hyperalgesia rats and 20 control rats were used. Visceral sensitivity during gastric distention (GD) was assessed by recording of electromyogram (EMG) at pressures of 20, 40, 60, and 80 mmHg. DVS with doses of 1, 10, and 30 mg/kg were administrated by gavage, 5-HT1A antagonist (WAY-100635, 0.3 mg/kg) was given subcutaneously, and 5-HT2A antagonist (ketanserin, 1 mg/kg) was given intraperitoneally. The level of norepinephrine in plasma was measured by enzyme-linked immunosorbent assay. We found that 1) visceral hypersensitivity induced by acetic acid was validated. 2) DVS dose-dependently reduced visceral hypersensitivity in the gastric hypersensitivity rats. The EMG (% of baseline value without GD) during GD at 60 and 80 mmHg with DVS at a dose of 30 mg/kg were 119.4 ± 2.3% (vs. saline 150.9 ± 2.7%, P < 0.001) and 128.2 ± 3.2% (vs. saline 171.1 ± 2.4%, P < 0.001). Similar findings were observed at a dose of 10 mg/kg. DVS at a dose of 1 mg/kg reduced visceral hypersensitivity only during GD at 60 mmHg. 3) Neither WAY-100635 nor ketanserin blocked the effect of DVS on visceral sensitivity. 4) DVS at 30 mg/kg significantly increased plasma NE level (P = 0.012 vs. saline). 5) DVS at 30 mg/kg significantly delayed solid gastric emptying (P < 0.05 vs. saline). We conclude that DVS reduces visceral sensitivity in a rodent model of visceral hypersensitivity and delays solid gastric emptying. Caution should be made when DVS is used for treating patients.

  10. Radioiodination of 2,3-dimethyl-4H-furo[3,2-c]coumarin and biological evaluation in solid tumor bearing mice.

    Science.gov (United States)

    Abd Elhalim, S M; Ibrahim, I T

    2014-10-22

    Compound 2,3-dimethyl-4H-furo[3,2-c]coumarin is a coumarin derivative that could be labeled with (125)I. The process of labeling was started using 1mg of the compound, 50µg CAT oxidizing agent, 30min as reaction time at pH with a yield about 95%. The (125)I-coumarin derivative was stable for about 48h. Radiochemical purity of the labeled compound was performed by electrophoresis and HPLC. The labeled compound was separated with purity about 95%. Tumor transplantation to produce a solid tumor in the right leg of albino mice was made by intramuscular injection of 2×10(6) EAC (Ehrlish acittes carcinoma cells). Biodistribution study of (125)I-coumarin derivative revealed that the uptake in tumor bearing leg was over 5% at 1h and 4h post-injection. This uptake encourages the use of (123)I-coumarin derivative in imaging of tumor sites.

  11. Effect of weight-bearing exercise and calcium supplement on cortical and trabecular bone in the proximal tibia metaphyseal- an experimental protocol in ovariectomized rats

    Directory of Open Access Journals (Sweden)

    Valliollah Dabidy Roshan1

    2009-01-01

    Full Text Available (Received 4 April, 2009; Accepted 17 June, 2009AbstractBackground and purpose: Osteoporotic fractures are much more common in older post-menopausal women and account for significant morbidity and mortality. Although age is an independent risk factor for fractures, bone micro-architecture is the predictor of subsequent fractures. Adequate calcium and Weight-bearing exercise are known to affect skeletal development, however, the effects of calcium supplement and treadmill endurance running on bone micro-architecture are not well known. The objective of this study was to determine the effects of treadmill endurance running training and calcium supplement, on micro-architectures of cortical and trabecular bone in the proximal tibia metaphyseal in ovariectomized Sprague Dawley rats.Materials and methods: Forty-three rats were randomly divided into endurance running training, calcium supplement, control, pre-test and base groups. The rats in the treadmill running group performed the progressive running exercise in 12 to 20 m/minutes for a total of 10 to 60 minutes, 5 times a week. Calcium group received ca supplement using Gavage (35 mg/kg/day for 8 weeks. After 8 weeks, micro-architecture parameters in the proximal tibia metaphyseal were measured by using a semi-automated image analysis system.Results: The ovariectomay was associated with a significant decrease in the trabecular volume and thickness, while separation insignificantly decreased in the cortical volume and thickness in the proximal tibia metaphyseal. The treadmill running exercise and calcium supplement significantly increased cortical or trabecular volume and also thickness and the trabecular separation compared with age-matched controls. Furthermore, the micro-architectures of cortical and trabecular bone in the proximal tibia metaphyseal was insignificant between the treadmill endurance running and calcium supplement groups.Conclusion: Skeletal benefits can be obtained by changes in

  12. Pharmacokinetic and Tissue Distribution Study of Solid Lipid Nanoparticles of Zidovudine in Rats

    Directory of Open Access Journals (Sweden)

    Shah Purvin

    2014-01-01

    Full Text Available Zidovudine-loaded solid lipid nanoparticles (AZT-SLNs and zidovudine in solution were prepared and administered in rats. The aim of this research was to study whether the bioavailability of zidovudine can be improved by AZT-SLNs perorally to rats as compared to oral administration of zidovudine. Zidovudine was determined in plasma and tissues by reverse phase high performance liquid chromatography. The pharmacokinetic parameters of zidovudine were determined after peroral administration: area under curve of concentration versus time (AUC for AZT-SLNs was 31.25% greater than AZT solution; meanwhile mean resident time (MRT was found to be 1.83 times higher for AZT-SLNs than AZT solution. Elimination half life of zidovudine was also increased for SLN formulation. Tissue distribution pattern of zidovudine was changed in case of AZT-SLNs. AUC of zidovudine in brain and liver was found to be approximately 2.73 and 1.77 times higher in AZT-SLNs than AZT solution, respectively, indicating that AZT-SLNs could cross blood brain barrier. Distribution of zidovudine was approximately 0.95 and 0.86 times lesser in heart and kidney, respectively. It can be concluded from the study that oral administration of AZT-SLNs modifies the plasma pharmacokinetic parameters and biodistribution of zidovudine.

  13. Cefdinir Solid Dispersion Composed of Hydrophilic Polymers with Enhanced Solubility, Dissolution, and Bioavailability in Rats

    Directory of Open Access Journals (Sweden)

    Hyun-Jong Cho

    2017-02-01

    Full Text Available The aim of this work was to develop cefdinir solid dispersions (CSDs prepared using hydrophilic polymers with enhanced dissolution/solubility and in vivo oral bioavailability. CSDs were prepared with hydrophilic polymers such as hydroxypropyl-methylcellulose (HPMC; CSD1, carboxymethylcellulose-Na (CMC-Na; CSD2, polyvinyl pyrrolidone K30 (PVP K30; CSD3 at the weight ratio of 1:1 (drug:polymer using a spray-drying method. The prepared CSDs were characterized by aqueous solubility, differential scanning calorimetry (DSC, powder X-ray diffraction (p-XRD, scanning electron microscopy (SEM, aqueous viscosity, and dissolution test in various media. The oral bioavailability of CSDs was also evaluated in rats and compared with cefdinir powder suspension. The cefdinir in CSDs was amorphous form, as confirmed in the DSC and p-XRD measurements. The developed CSDs commonly resulted in about 9.0-fold higher solubility of cefdinir and a significantly improved dissolution profile in water and at pH 1.2, compared with cefdinir crystalline powder. Importantly, the in vivo oral absorption (represented as AUCinf was markedly increased by 4.30-, 6.77- and 3.01-fold for CSD1, CSD2, and CSD3, respectively, compared with cefdinir suspension in rats. The CSD2 prepared with CMC-Na would provide a promising vehicle to enhance dissolution and bioavailability of cefdinir in vivo.

  14. Taurine zinc solid dispersions attenuate doxorubicin-induced hepatotoxicity and cardiotoxicity in rats.

    Science.gov (United States)

    Wang, Yu; Mei, Xueting; Yuan, Jingquan; Lu, Wenping; Li, Binglong; Xu, Donghui

    2015-11-15

    The clinical efficacy of anthracycline anti-neoplastic agents is limited by cardiac and hepatic toxicities. The aim of this study was to assess the hepatoprotective and cardioprotective effects of taurine zinc solid dispersions, which is a newly-synthesized taurine zinc compound, against doxorubicin-induced toxicity in Sprague-Dawley rats intraperitoneally injected with doxorubicin hydrochloride (3mg/kg) three times a week (seven injections) over 28 days. Hemodynamic parameters, levels of liver toxicity markers and oxidative stress were assessed. Taurine zinc significantly attenuated the reductions in blood pressure, left ventricular pressure and ± dp/dtmax, increases in serum alanine aminotransferase and aspartate aminotransferase activities, and reductions in serum Zn(2+) and albumin levels (Ptaurine zinc dose-dependently increased liver superoxide dismutase activity and glutathione concentration, and decreased malondialdehyde level (PTaurine zinc dose-dependently increased liver heme oxygenase-1 and UDP-glucuronyl transferase mRNA and protein expression (Ptaurine zinc inhibited c-Jun N-terminal kinase phosphorylation by upregulating dual-specificity phosphoprotein phosphatase-1. Additionally, taurine zinc inhibited cardiomyocyte apoptosis as there was decreased TUNEL/DAPI positivity and protein expression of caspase-3. These results indicate that taurine zinc solid dispersions prevent the side-effects of anthracycline-based anticancer therapy. The mechanisms might be associated with the enhancement of antioxidant defense system partly through activating transcription to synthesize endogenous phase II medicine enzymes and anti-apoptosis through inhibiting JNK phosphorylation. Copyright © 2015 Elsevier Inc. All rights reserved.

  15. Biodistribution of phenylboric acid derivative entrapped lipiodol and 4-borono-2-{sup 18}F-fluoro-L-phenylalanine-fructose in GP7TB liver tumor bearing rats for BNCT

    Energy Technology Data Exchange (ETDEWEB)

    Liao, A.H. [Department of Biomedical Imaging and Radiological Sciences, National Yang-Ming University, No. 155, Sec. 2, Li-Nong St., Bei-tou, 112 Taipei, Taiwan (China); Chou, F.I. [Institute of Nuclear Engineering and Science, National Tsing-Hua University, Hsinchu, Taiwan (China); Kuo, Y.C. [Department of Biomedical Imaging and Radiological Sciences, National Yang-Ming University, No. 155, Sec. 2, Li-Nong St., Bei-tou, 112 Taipei, Taiwan (China); Department of Radiation Oncology, China Medical University Hospital, Taichung, Taiwan (China); Chen, H.W. [Department of Radiation Oncology and Hospice Center, Mackay Memorial Hospital, Taipei, Taiwan (China); Kai, J.J. [Institute of Nuclear Engineering and Science, National Tsing-Hua University, Hsinchu, Taiwan (China); Chang, C.W. [Department of Nuclear Medicine, Veterans General Hospital, Taipei, Taiwan (China); Chen, F.D. [Department of Biomedical Imaging and Radiological Sciences, National Yang-Ming University, No. 155, Sec. 2, Li-Nong St., Bei-tou, 112 Taipei, Taiwan (China); Hwang, J.J. [Department of Biomedical Imaging and Radiological Sciences, National Yang-Ming University, No. 155, Sec. 2, Li-Nong St., Bei-tou, 112 Taipei, Taiwan (China)], E-mail: jjhwang@ym.edu.tw

    2010-03-15

    A new phenylboric acid derivative entrapped lipiodol (PBAD-lipiodol) was developed as a boron carrier for the boron neutron capture therapy (BNCT) of hepatoma in Taiwan. The biodistribution of both PBAD-lipiodol and BPA-fructose was assayed in GP7TB hepatoma-bearing rat model. The highest uptake of PBAD-lipiodol was found at 2 h post injection. The application of BNCT for the hepatoma treatment in tumor-bearing rats is suggested to be 2-4 h post PBAD-lipiodol injection.

  16. Growth hormone, IGF-I, and exercise effects on non-weight-bearing fast muscles of hypophysectomized rats

    Science.gov (United States)

    Grossman, E. J.; Grindeland, R. E.; Roy, R. R.; Talmadge, R. J.; Evans, J.; Edgerton, V. R.

    1997-01-01

    The effects of growth hormone (GH) or insulin-like growth factor I (IGF-I) with or without exercise (ladder climbing) in countering the effects of unweighting on fast muscles of hypophysectomized rats during 10 days of hindlimb suspension were determined. Compared with untreated suspended rats, muscle weights were 16-29% larger in GH-treated and 5-15% larger in IGF-I-treated suspended rats. Exercise alone had no effect on muscle weights. Compared with ambulatory control, the medial gastrocnemius weight in suspended, exercised rats was larger after GH treatment and maintained with IGF-I treatment. The combination of GH or IGF-I plus exercise in suspended rats resulted in an increase in size of each predominant fiber type, i.e., types I, I + IIa and IIa + IIx, in the medial gastrocnemius compared with untreated suspended rats. Normal ambulation or exercise during suspension increased the proportion of fibers expressing embryonic myosin heavy chain in hypophysectomized rats. The phenotype of the medial gastrocnemius was minimally affected by GH, IGF-I, and/or exercise. These results show that there is an IGF-I, as well as a GH, and exercise interactive effect in maintaining medial gastrocnemius fiber size in suspended hypophysectomized rats.

  17. Growth hormone, IGF-I, and exercise effects on non-weight-bearing fast muscles of hypophysectomized rats

    Science.gov (United States)

    Grossman, E. J.; Grindeland, R. E.; Roy, R. R.; Talmadge, R. J.; Evans, J.; Edgerton, V. R.

    1997-01-01

    The effects of growth hormone (GH) or insulin-like growth factor I (IGF-I) with or without exercise (ladder climbing) in countering the effects of unweighting on fast muscles of hypophysectomized rats during 10 days of hindlimb suspension were determined. Compared with untreated suspended rats, muscle weights were 16-29% larger in GH-treated and 5-15% larger in IGF-I-treated suspended rats. Exercise alone had no effect on muscle weights. Compared with ambulatory control, the medial gastrocnemius weight in suspended, exercised rats was larger after GH treatment and maintained with IGF-I treatment. The combination of GH or IGF-I plus exercise in suspended rats resulted in an increase in size of each predominant fiber type, i.e., types I, I + IIa and IIa + IIx, in the medial gastrocnemius compared with untreated suspended rats. Normal ambulation or exercise during suspension increased the proportion of fibers expressing embryonic myosin heavy chain in hypophysectomized rats. The phenotype of the medial gastrocnemius was minimally affected by GH, IGF-I, and/or exercise. These results show that there is an IGF-I, as well as a GH, and exercise interactive effect in maintaining medial gastrocnemius fiber size in suspended hypophysectomized rats.

  18. Steroid hormones affect binding of the sigma ligand {sup 11}C-SA4503 in tumour cells and tumour-bearing rats

    Energy Technology Data Exchange (ETDEWEB)

    Rybczynska, Anna A.; Elsinga, Philip H.; Sijbesma, Jurgen W.; Jong, Johan R. de; Vries, Erik F. de; Dierckx, Rudi A.; Waarde, Aren van [University of Groningen, Nuclear Medicine and Molecular Imaging, University of Groningen Medical Center, Groningen (Netherlands); Ishiwata, Kiichi [Tokyo Metropolitan Institute of Gerontology, Positron Medical Center, Tokyo (Japan)

    2009-07-15

    Sigma receptors are implicated in memory and cognitive functions, drug addiction, depression and schizophrenia. In addition, sigma receptors are strongly overexpressed in many tumours. Although the natural ligands are still unknown, steroid hormones are potential candidates. Here, we examined changes in binding of the sigma-1 agonist {sup 11}C-SA4503 in C6 glioma cells and in living rats after modification of endogenous steroid levels. {sup 11}C-SA4503 binding was assessed in C6 monolayers by gamma counting and in anaesthetized rats by microPET scanning. C6 cells were either repeatedly washed and incubated in steroid-free medium or exposed to five kinds of exogenous steroids (1 h or 5 min before tracer addition, respectively). Tumour-bearing male rats were repeatedly treated with pentobarbital (a condition known to result in reduction of endogenous steroid levels) or injected with progesterone. Binding of {sup 11}C-SA4503 to C6 cells was increased ({proportional_to}50%) upon removal and decreased ({proportional_to}60%) upon addition of steroid hormones (rank order of potency: progesterone > allopregnanolone = testosterone = androstanolone > dehydroepiandrosterone-3-sulphate, IC{sub 50} progesterone 33 nM). Intraperitoneally administered progesterone reduced tumour uptake and tumour-to-muscle contrast (36%). Repeated treatment of animals with pentobarbital increased the PET standardized uptake value of {sup 11}C-SA4503 in tumour (16%) and brain (27%), whereas the kinetics of blood pool radioactivity was unaffected. The binding of {sup 11}C-SA4503 is sensitive to steroid competition. Since not only increases but also decreases of steroid levels affect ligand binding, a considerable fraction of the sigma-1 receptor population in cultured tumour cells or tumour-bearing animals is normally occupied by endogenous steroids. (orig.)

  19. Effect of baclofen on liquid and solid gastric emptying in rats.

    Science.gov (United States)

    Collares, Edgard Ferro; Vinagre, Adriana Mendes

    2010-01-01

    Gamma-aminobutyric acid (GABA) is a potent inhibitory neurotransmitter. There is evidence that GABA(B) receptors located in the dorsal complex and in afferent fibers of the vagus nerve participate in the control of gastrointestinal motility. To assess the intracerebroventricularly (ICV) and intravenously (IV) effect of baclofen, a GABA(B) receptor agonist, on liquid and solid gastric emptying in rats. Adult male Wistar rats weighing 250-300 g (n = 6-8 animals) were used. Gastric emptying of liquid test meals labeled with phenol red was evaluated by the determination of percent gastric retention (%GR) 10 and 15 min after orogastric administration of saline and 10% glucose meals, respectively. Baclofen was injected ICV (1 and 2 µg/animal) through a tube implanted into the lateral ventricle of the brain and was injected IV (1 and 2 mg/kg) into a tail vein. The gastric emptying of liquid was determined 10 or 30 min after ICV and IV baclofen administration, respectively. The gastric emptying of the solid meal was assessed by the determination of percent gastric retention 2 h after the beginning of the ingestion of the habitual ratio by the animal, consumed over a period of 30 min. Baclofen was administered ICV (1 and 2 µg/animal) or IV (1 and 2 mg/kg) immediately after the end of the ingestion of the solid meal. The control groups received vehicle (sterile saline solution) ICV or IV. The group of animals receiving baclofen ICV (2 mg/animal) presented a significantly lower (P<0.05, Tukey test) %GR (mean ± SEM) of the saline (18.1 ± 2.5%) compared to control (33.2 ± 2.2%). In the group receiving the drug IV, the gastric retention of the same test meal did not differ from control. ICV and IV administration of baclofen had no effect on the gastric emptying of the 10% glucose solution compared to control. ICV administration of 1 or 2 mg baclofen/animal significantly increased the gastric retention of the solid test meal (57.9 ± 6.5% and 66.6 ± 6.3%, respectively

  20. Variation in Scent Compounds of Oil-Bearing Rose (Rosa damascena Mill. Produced by Headspace Solid Phase Microextraction, Hydrodistillation and Solvent Extraction

    Directory of Open Access Journals (Sweden)

    Sabri Erbaş

    2016-03-01

    Full Text Available In this research, rose oil and rose water were hydro-distilled from the fresh oil-bearing rose flowers (Rosa damascena Mill. using Clevenger-type apparatus. Rose concretes were extracted from the fresh rose flowers by using non-polar solvents, e.g. diethyl ether, petroleum ether, cyclo-hexane, chloroform and n-hexane, and subsequently by evaporation of the solvents under vacuum. Absolutes were produced from the concretes with ethyl alcohol extraction at -20°C, leaving behind the wax and other paraffinic substances. Scent compounds of all these products detected by gas chromatography (GC-FID/GC-MS were compared with the natural scent compounds of fresh rose flower detected by using headspace solid phase microextraction (HS-SPME with carboxen/polydimethylsiloxane (CAR/PDMS fiber. A total of 46 compounds analysis were identified by HS-SPME-GC-MS in the fresh flower, and a total of 15 compounds were identified by GC-MS in the hydrodistilled rose oil. While main compounds in rose oil were geraniol (35.4%, citronellol (31.6%, and nerol (15.3%, major compound in fresh rose flower, rose water and residue water was phenylethyl alcohol (43.2, 35.6 and 98.2%, respectively. While the highest concrete yield (0.7% was obtained from diethyl ether extraction, the highest absolute yield (70.9% was obtained from the n-hexane concrete. The diethyl ether concrete gave the highest productivity of absolute, as 249.7 kg of fresh rose flowers was needed to produce 1 kg of absolute.

  1. Gastro intestinal tracking and gastric emptying of solid dosage forms in rats using X-ray imaging.

    Science.gov (United States)

    Saphier, Sigal; Rosner, Amir; Brandeis, Rachel; Karton, Yishai

    2010-03-30

    The aim of this research was to study the gastrointestinal transit and gastric emptying of non-disintegrating solid dosage forms in rats using X-ray imaging. Commercial gelatin minicapsules were filled with barium sulfate and enterically coated using Eudragit S100. The capsules were administered orally to rats followed by a solution of iodine based contrast agent iopromide. Images were obtained using a standard X-ray camera and digital film processing. Capsules were followed through the GI tract from the stomach to the small intestine, cecum and large intestine and the capsule location could be easily identified. Gastric emptying of different sized capsules was studied. The effect of fasting and time of administration on gastric retention was also studied. It was found that shortened capsules of 3.5 and 4.8mm length were emptied from the stomach whereas the commercial length 7.18mm capsules were retained. Surprisingly, 2.5h post administration more rats retained the capsules in the stomach in the fasted state than in the fed state. We found that X-ray imaging can be used for simple visualization and localization of solid dosage forms in rats in the fed state using shortened commercial minicapsules on rats.

  2. Solid Lubricated Rolling Element Bearings

    Science.gov (United States)

    1980-02-15

    Metal, X is the chalco -en atom and x is the relative amount of the intercalated species. In the alkali intercalated species, 0< x <l and the alkali...stabilize them at the stoichiometric 1.X2 coi.inositlon. Also, intercalation of alkali metal atoms into chalco . enides already oossessin:; the

  3. Pharmacokinetics study of arteether loaded solid lipid nanoparticles: an improved oral bioavailability in rats.

    Science.gov (United States)

    Dwivedi, Pankaj; Khatik, Renuka; Khandelwal, Kiran; Taneja, Isha; Raju, Kanumuri Siva Rama; Wahajuddin; Paliwal, Sarvesh Kumar; Dwivedi, Anil Kumar; Mishra, Prabhat Ranjan

    2014-05-15

    Arteether (ART), an artemisinin derivative, is a life saving drug for multiple drug resistant malaria. It has a deliverance effect in Falciparum malaria and cerebral malaria. We have prepared solid lipid nanoparticles (SLN) by high pressure homogenization (HPH) technique. ART-loaded SLN (ART-SLN) has been produced reproducibly with homogeneous particle size. ART-SLN was characterized for their size measured by Zetasizer Nano-ZS, Malvern, UK and by high resolution transmission electron microscopy (HR-TEM) and which was found to be 100 ± 11.2 nm. The maximum percentage entrapment efficiency (%EE) determined with the high-performance liquid chromatography (HPLC) has been found to be 69 ± 4.2% in ART-SLN-3. The release pattern from ART-SLN revealed that the release of ART is slow but time-dependent manner, which is desirable as it will help to protect the acid degradation of ART in stomach. The percentage cytotoxicity of blank SLN has been found within the acceptable range. The pharmacokinetics results indicated that ART-SLN-3 absorption has been significantly enhanced in comparison to ART in aqueous suspension and ART in ground nut oil (GNO) in rats. The % relative bioavailability (RB%) of ART-SLN to the ART in GNO and ART in aqueous suspension in rats was 169.99% and 7461%, respectively which was found to be significantly high in both the cases. From the results, it can be concluded that ART-SLN offers a new approach to improve the oral bioavailability of ART.

  4. Journal bearing

    Science.gov (United States)

    Menke, John R.; Boeker, Gilbert F.

    1976-05-11

    1. An improved journal bearing comprising in combination a non-rotatable cylindrical bearing member having a first bearing surface, a rotatable cylindrical bearing member having a confronting second bearing surface having a plurality of bearing elements, a source of lubricant adjacent said bearing elements for supplying lubricant thereto, each bearing element consisting of a pair of elongated relatively shallowly depressed surfaces lying in a cylindrical surface co-axial with the non-depressed surface and diverging from one another in the direction of rotation and obliquely arranged with respect to the axis of rotation of said rotatable member to cause a flow of lubricant longitudinally along said depressed surfaces from their distal ends toward their proximal ends as said bearing members are rotated relative to one another, each depressed surface subtending a radial angle of less than 360.degree., and means for rotating said rotatable bearing member to cause the lubricant to flow across and along said depressed surfaces, the flow of lubricant being impeded by the non-depressed portions of said second bearing surface to cause an increase in the lubricant pressure.

  5. Comparison of three different types of cilostazol-loaded solid dispersion: Physicochemical characterization and pharmacokinetics in rats.

    Science.gov (United States)

    Mustapha, Omer; Kim, Kyung Soo; Shafique, Shumaila; Kim, Dong Shik; Jin, Sung Giu; Seo, Youn Gee; Youn, Yu Seok; Oh, Kyung Taek; Yong, Chul Soon; Kim, Jong Oh; Choi, Han-Gon

    2017-06-01

    The aim of this research was to compare three different types of cilostazol-loaded solid dispersion system including solvent-evaporated, solvent-wetted and surface-attached solid dispersion. The effect of polymers and surfactants on the aqueous solubility of cilostazol was investigated, leading to the selection of polyvinylpyrrolidone (PVP) and sodium lauryl sulphate (SLS). Employing a spray-drying technique, numerous surface-attached, solvent-evaporated and solvent-wetted solid dispersions were prepared with various amounts PVP and SLS using water, 90% ethanol and acetone, respectively. Their physicochemical properties, solubility, dissolution and oral bioavailability in rats were assessed compared to the drug powder. Among each solid dispersion system tested, the surface-attached, solvent-evaporated and solvent-wetted solid dispersions composed of cilostazol, PVP and SLS at weight ratios of 3.0 : 0.75 : 1.5, 3.0 : 3.0 : 1.5 and 3.0 : 3.0 : 1.5, respectively, provided the highest drug solubility and dissolution. The solvent-evaporated solid dispersion gave homogeneous and very small spherical particles, in which the drug was changed to an amorphous state. In the solvent-wetted solid dispersion, the amorphous drug was attached to the polymer surface. Conversely, in the surface-attached solid dispersion, the carriers were adhered onto the surface of the unchanged crystalline drug. The solubility, dissolution and oral bioavailability were significantly increased in the order of solvent-evaporated>solvent-wetted>surface-attached>drug powder. Thus, the type of solid dispersion considerably affected the physicochemical properties, aqueous solubility and oral bioavailability. Furthermore, the cilostazol-loaded solvent-evaporated solid dispersion with the highest oral bioavailability would be actively recommended as a practical oral pharmaceutical product. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Negligible Colon Cancer Risk from Food-Borne Acrylamide Exposure in Male F344 Rats and Nude (nu/nu) Mice-Bearing Human Colon Tumor Xenografts

    Science.gov (United States)

    Raju, Jayadev; Roberts, Jennifer; Sondagar, Chandni; Kapal, Kamla; Aziz, Syed A.; Caldwell, Don; Mehta, Rekha

    2013-01-01

    Acrylamide, a possible human carcinogen, is formed in certain carbohydrate-rich foods processed at high temperature. We evaluated if dietary acrylamide, at doses (0.5, 1.0 or 2.0 mg/kg diet) reflecting upper levels found in human foods, modulated colon tumorigenesis in two rodent models. Male F344 rats were randomized to receive diets without (control) or with acrylamide. 2-weeks later, rats in each group received two weekly subcutaneous injections of either azoxymethane (AOM) or saline, and were killed 20 weeks post-injections; colons were assessed for tumors. Male athymic nude (nu/nu) mice bearing HT-29 human colon adenocarcinoma cells-derived tumor xenografts received diets without (control) or with acrylamide; tumor growth was monitored and mice were killed 4 weeks later. In the F344 rat study, no tumors were found in the colons of the saline-injected rats. However, the colon tumor incidence was 54.2% and 66.7% in the control and the 2 mg/kg acrylamide-treated AOM-injected groups, respectively. While tumor multiplicity was similar across all diet groups, tumor size and burden were higher in the 2 mg/kg acrylamide group compared to the AOM control. These results suggest that acrylamide by itself is not a “complete carcinogen”, but acts as a “co-carcinogen” by exacerbating the effects of AOM. The nude mouse study indicated no differences in the growth of human colon tumor xenografts between acrylamide-treated and control mice, suggesting that acrylamide does not aid in the progression of established tumors. Hence, food-borne acrylamide at levels comparable to those found in human foods is neither an independent carcinogen nor a tumor promoter in the colon. However, our results characterize a potential hazard of acrylamide as a colon co-carcinogen in association with known and possibly other environmental tumor initiators/promoters. PMID:24040114

  7. Brain targeting effect of camptothecin-loaded solid lipid nanoparticles in rat after intravenous administration.

    Science.gov (United States)

    Martins, Susana M; Sarmento, Bruno; Nunes, Cláudia; Lúcio, Marlene; Reis, Salette; Ferreira, Domingos C

    2013-11-01

    This study intended to investigate the ability of solid lipid nanoparticles (SLN) to deliver camptothecin into the brain parenchyma after crossing the blood-brain barrier. For that purpose, camptothecin-loaded SLN with mean size below 200 nm, low polydispersity index (94%) were produced. Synchrotron small and wide angle X-ray scattering (SAXS/WAXS) analysis indicates that SLN maintain their physical stability in contact with DMPC membrane, whereas SLN change the lamellar structure of DMPC into a cubic phase, which is associated with efficient release of the incorporated drugs. Cytotoxicity studies against glioma and macrophage human cell lines revealed that camptothecin-loaded SLN induced cell death with the lowest maximal inhibitory concentration (IC50) values, revealing higher antitumour activity of camptothecin-loaded SLN against gliomas. Furthermore, in vivo biodistribution studies of intravenous camptothecin-loaded SLN performed in rats proved the positive role of SLN on the brain targeting since significant higher brain accumulation of camptothecin was observed, compared to non-encapsulated drug. Pharmacokinetic studies further demonstrated lower deposition of camptothecin in peripheral organs, when encapsulated into SLN, with consequent decrease in potential side toxicological effects. These results confirmed the potential of camptothecin-loaded SLN for antitumour brain treatments.

  8. Structure and disorder in iron-bearing sodium silicate glasses and melts: High-resolution 29Si and 17O solid-state NMR study

    Science.gov (United States)

    Kim, H.; Lee, S.

    2012-12-01

    Understanding of the effect of iron content on the structure (Si coordination environment and the degree of polymerization) of iron-bearing silicate melts and glasses is essential for studying their macroscopic properties and diverse geological processes in Earth's interior. Although the recent advances in high-resolution solid-state NMR techniques provide detailed structural information of a diverse iron-free oxide glasses with varying composition (e.g., Lee, P. Natl. Acad. Sci. USA., 2011, 108, 6847; Lee and Sung, Chem. Geol., 2008, 256, 326; Park and Lee, Geochim. Cosmochim. Acta, 2012, 80, 125; Lee et al., Phys. Rev., 103, 095501, 2009), their application to iron-bearing silicate glasses has a limited usefulness in resolving atomic configurations due to the effect of paramagnetic cation (i.e., Fe) on the NMR spectra. Here, we report the first ^{29}Si and ^{17}O NMR spectra for sodium-iron silicate glasses with varying iron content (Na_{2}O-Fe_{2}O_{3}-SiO_{2} glasses, up to 34.60 wt% Fe_{2}O_{3}), revealing previously unknown details of iron-induced changes in structure and disorder. While signal intensity decreases and peak width increases exponentially with increasing iron content [=Fe_{2}O_{3}/(Na_{2}O+Fe_{2}O_{3})], ^{29}Si MAS NMR spectra for sodium-iron silicate glasses present the slight peak shift and an asymmetrical peak broadening toward higher Q^{n} species with increasing iron content. This result implies an increase in the degree of polymerization with increasing iron content. Additionally, ^{29}Si spin-relaxation time (T_{1}) for the glasses decreases with increasing of iron content by several orders of magnitude. ^{17}O 3QMAS NMR spectra for the glasses show well-resolved non-bridging oxygen (NBO, Na-O-Si) and bridging oxygen (BO, Si-O-Si) even at relatively high iron content, providing the first direct experimental estimation of the degree of polymerization. In sodium-iron silicate glasses, the fraction of NBO decreases with increasing iron

  9. Evaluation of apple pomace based reconstituted feed in rats after solid state fermentation and ethanol recovery

    Directory of Open Access Journals (Sweden)

    A. Devrajan

    2004-03-01

    Full Text Available To utilize apple pomace in an economical and effective way, a feed was developed by solid state fermentation (SSF using sequential interactive co-culture of Candida utilis and Kloeckera. Removal of ethanol and drying of the left - over residue. Feeding trial was conducted in white albino rats before and after reconstitution of apple pomace feed in the choice and no choice study. Feeding of apple pomace feed in the rats before reconstitution indicated that neither in fermented nor in unfermented form it was acceptable. In the no choice study both in 100% fermented and unfermented apple pomace group feed intake decreased continuously resulting in death of rats apparently due to decreased digestibility owing to high fibre content. Further, fermented or unfermented apple pomace based feed had lower digestibility and efficiency of conversion than the standard rat feed. Compared to the standard feed group, growth rates in all the feed groups were negative. The results of choice study of different feeds corroborated with the no-choice study mentioned earlier. Incorporation of fermented apple pomace into standard rat feed in the ratio of 1:1 gave better acceptability and digestibility. Reconstituted feed with 10% jaggery, 2% groundnut oil, 0.01% mixed flavour and 1% salt was the most acceptable. The post-mortem examination of the rats that died during the feeding trial revealed generalized oedema, probably due to some hepatotoxin in the feed. The blood glucose level in the apple pomace feed group except that was reconstituted with jaggery, showed a general hypoglycemia, though falling in the range. The increased ALT and AST levels in the serum also suggest damage to the liver. The mortality rate, post-mortem examination of the rats that died during the feeding trial and blood biochemical analysis of rat serum suggest a more elaborative study for extended period of time.Para utilizar bagaço de maçã de uma maneira econômica e eficaz, foi desenvolvido

  10. Grizzly bear

    Science.gov (United States)

    Schwartz, C.C.; Miller, S.D.; Haroldson, M.A.; Feldhamer, G.; Thompson, B.; Chapman, J.

    2003-01-01

    The grizzly bear inspires fear, awe, and respect in humans to a degree unmatched by any other North American wild mammal. Like other bear species, it can inflict serious injury and death on humans and sometimes does. Unlike the polar bear (Ursus maritimus) of the sparsely inhabited northern arctic, however, grizzly bears still live in areas visited by crowds of people, where presence of the grizzly remains physically real and emotionally dominant. A hike in the wilderness that includes grizzly bears is different from a stroll in a forest from which grizzly bears have been purged; nighttime conversations around the campfire and dreams in the tent reflect the presence of the great bear. Contributing to the aura of the grizzly bear is the mixture of myth and reality about its ferocity. unpredictable disposition, large size, strength, huge canines, long claws, keen senses, swiftness, and playfulness. They share characteristics with humans such as generalist life history strategies. extended periods of maternal care, and omnivorous diets. These factors capture the human imagination in ways distinct from other North American mammals. Precontact Native American legends reflected the same fascination with the grizzly bear as modern stories and legends (Rockwell 1991).

  11. Quercetin attenuates oxidative stress in the blood plasma of rats bearing DMBA-induced mammary cancer and treated with a combination of doxorubicin and docetaxel.

    Science.gov (United States)

    Tabaczar, Sabina; Pieniążek, Anna; Czepas, Jan; Piasecka-Zelga, Joanna; Gwoździński, Krzysztof; Koceva-Chyła, Aneta

    2013-12-01

    The development of side-effects during doxorubicin-docetaxel (DOX-DTX) chemotherapy is considered as related to generation of oxidative stress by DOX. The addition of docetaxel potentiates this effect. Thus, antioxidants are assumed as a promising remedy for neutralizing deteriorating effects of reactive oxygen species (ROS) in pathological conditions and polyphenolic antioxidants are suitable candidates for such a therapeutic approach. We evaluated the ability of quercetin to attenuate oxidative stress developed during the process of DMBA carcinogenesis and DOX-DTX chemotherapy in the blood plasma of rats bearing mammary tumors. We have found that quercetin significantly improved the plasma nonenzymatic antioxidant capacity (NEAC) and reduced lipid peroxidation, which suggest the beneficial effect of flavonoid. The inclusion of quercetin to the DOX-DTX chemotherapy was also advantageous. A considerable decrease of carbonyls and lipid peroxidation products (TBARS) and improvement of the endogenous antioxidant defense system (an increase of NEAC, thiols and SOD activity) were observed compared to rats treated with DOX-DTX chemotherapy. These results suggest that quercetin could protect blood plasma constituents against oxidative damage evoked by DOX and DTX.

  12. Tumor growth reduction is regulated at the gene level in Walker 256 tumor-bearing rats supplemented with fish oil rich in EPA and DHA

    Energy Technology Data Exchange (ETDEWEB)

    Borghetti, G.; Yamazaki, R.K.; Coelho, I.; Pequito, D.C.T.; Schiessel, D.L.; Kryczyk, M.; Mamus, R.; Naliwaiko, K.; Fernandes, L.C. [Departamento de Fisiologia, Setor de Ciências Biológicas, Universidade Federal do Paraná, Curitiba, PR (Brazil)

    2013-08-23

    We investigated the effect of fish oil (FO) supplementation on tumor growth, cyclooxygenase 2 (COX-2), peroxisome proliferator-activated receptor gamma (PPARγ), and RelA gene and protein expression in Walker 256 tumor-bearing rats. Male Wistar rats (70 days old) were fed with regular chow (group W) or chow supplemented with 1 g/kg body weight FO daily (group WFO) until they reached 100 days of age. Both groups were then inoculated with a suspension of Walker 256 ascitic tumor cells (3×10{sup 7} cells/mL). After 14 days the rats were killed, total RNA was isolated from the tumor tissue, and relative mRNA expression was measured using the 2{sup -ΔΔCT} method. FO significantly decreased tumor growth (W=13.18±1.58 vs WFO=5.40±0.88 g, P<0.05). FO supplementation also resulted in a significant decrease in COX-2 (W=100.1±1.62 vs WFO=59.39±5.53, P<0.001) and PPARγ (W=100.4±1.04 vs WFO=88.22±1.46, P<0.05) protein expression. Relative mRNA expression was W=1.06±0.022 vs WFO=0.31±0.04 (P<0.001) for COX-2, W=1.08±0.02 vs WFO=0.52±0.08 (P<0.001) for PPARγ, and W=1.04±0.02 vs WFO=0.82±0.04 (P<0.05) for RelA. FO reduced tumor growth by attenuating inflammatory gene expression associated with carcinogenesis.

  13. Tumor growth reduction is regulated at the gene level in Walker 256 tumor-bearing rats supplemented with fish oil rich in EPA and DHA.

    Science.gov (United States)

    Borghetti, G; Yamazaki, R K; Coelho, I; Pequito, D C T; Schiessel, D L; Kryczyk, M; Mamus, R; Naliwaiko, K; Fernandes, L C

    2013-08-01

    We investigated the effect of fish oil (FO) supplementation on tumor growth, cyclooxygenase 2 (COX-2), peroxisome proliferator-activated receptor gamma (PPARγ), and RelA gene and protein expression in Walker 256 tumor-bearing rats. Male Wistar rats (70 days old) were fed with regular chow (group W) or chow supplemented with 1 g/kg body weight FO daily (group WFO) until they reached 100 days of age. Both groups were then inoculated with a suspension of Walker 256 ascitic tumor cells (3 × 10(7) cells/mL). After 14 days the rats were killed, total RNA was isolated from the tumor tissue, and relative mRNA expression was measured using the 2(-ΔΔCT) method. FO significantly decreased tumor growth (W=13.18 ± 1.58 vs WFO=5.40 ± 0.88 g, Psupplementation also resulted in a significant decrease in COX-2 (W=100.1 ± 1.62 vs WFO=59.39 ± 5.53, Pprotein expression. Relative mRNA expression was W=1.06 ± 0.022 vs WFO=0.31 ± 0.04 (P<0.001) for COX-2, W=1.08 ± 0.02 vs WFO=0.52 ± 0.08 (P<0.001) for PPARγ, and W=1.04 ± 0.02 vs WFO=0.82 ± 0.04 (P<0.05) for RelA. FO reduced tumor growth by attenuating inflammatory gene expression associated with carcinogenesis.

  14. Additional weight bearing during exercise and estrogen in the rat: the effect on bone mass, turnover, and structure.

    Science.gov (United States)

    Tromp, A M; Bravenboer, N; Tanck, E; Oostlander, A; Holzmann, P J; Kostense, P J; Roos, J C; Burger, E H; Huiskes, R; Lips, P

    2006-12-01

    Mechanical loading and estrogen play important roles in bone homeostasis. The aim of this study was to evaluate the effects of mechanical loading on trabecular bone in the proximal femur of ovariectomized rats. We hypothesized that mechanical loading suppresses bone resorption and increases bone formation, which differs from the suppressive effects of estrogen on both resorption and formation. Furthermore, we expected to find changes in trabecular architecture elicited by the effects of mechanical loading and estrogen deficiency. Sixty female Wistar rats, 12 weeks old, were assigned to either the sedentary groups sham surgery (SED), ovariectomy (SED+OVX), and ovariectomy with estrogen replacement (SED+OVX+E2) or to the exercise groups EX, EX+OVX, EX+OVX+E2. Following ovariectomy, 5 microg 17beta-estradiol was given once weekly to the estrogen replacement groups. Exercise consisted of running with a backpack (load +/-20% of body weight) for 15 minutes/day, 5 days/week, for 19 weeks. Dual-energy X-ray absorptiometry (DXA) scans were performed before (T0), during (T6), and after (T19) the exercise period to obtain bone mineral content (BMC) and bone mineral density (BMD) data. After the exercise program, all rats were killed and right and left femora were dissected and prepared for micro-CT scanning and histomorphometric analysis of the proximal femoral metaphysis. After 19 weeks, increases in BMC (P = 0.010) and BMD (P = 0.031) were significant. At T19, mechanical loading had a significant effect on BMC (P = 0.025) and BMD (P = 0.010), and an interaction between mechanical loading and estrogen (P = 0.023) was observed. Bone volume and trabecular number decreased significantly after ovariectomy, while trabecular separation, mineralizing surface, bone formation rate, osteoclast surface, degree of anisotropy, and structure model index increased significantly after ovariectomy (P exercise. Estrogen deficiency resulted in a less dense and more oriented trabecular bone

  15. High performance rolling element bearing

    Science.gov (United States)

    Bursey, Jr., Roger W. (Inventor); Olinger, Jr., John B. (Inventor); Owen, Samuel S. (Inventor); Poole, William E. (Inventor); Haluck, David A. (Inventor)

    1993-01-01

    A high performance rolling element bearing (5) which is particularly suitable for use in a cryogenically cooled environment, comprises a composite cage (45) formed from glass fibers disposed in a solid lubricant matrix of a fluorocarbon polymer. The cage includes inserts (50) formed from a mixture of a soft metal and a solid lubricant such as a fluorocarbon polymer.

  16. Human antibody expression in transgenic rats: comparison of chimeric IgH loci with human VH, D and JH but bearing different rat C-gene regions.

    Science.gov (United States)

    Ma, Biao; Osborn, Michael J; Avis, Suzanne; Ouisse, Laure-Hélène; Ménoret, Séverine; Anegon, Ignacio; Buelow, Roland; Brüggemann, Marianne

    2013-12-31

    Expression of human antibody repertoires in transgenic animals has been accomplished by introducing large human Ig loci into mice and, more recently, a chimeric IgH locus into rats. With human VH, D and JH genes linked to the rat C-region antibody expression was significantly increased, similar to wild-type levels not found with fully human constructs. Here we compare four rat-lines containing the same human VH-region (comprising 22 VHs, all Ds and all JHs in natural configuration) but linked to different rat CH-genes and regulatory sequences. The endogenous IgH locus was silenced by zinc-finger nucleases. After breeding, all lines produced exclusively chimeric human H-chain with near normal IgM levels. However, in two lines poor IgG expression and inefficient immune responses were observed, implying that high expression, class-switching and hypermutation are linked to optimal enhancer function provided by the large regulatory region at the 3' end of the IgH locus. Furthermore, exclusion of Cδ and its downstream interval region may assist recombination. Highly diverse IgG and immune responses similar to normal rats were identified in two strains carrying diverse and differently spaced C-genes.

  17. Preparation, biodistribution and neurotoxicity of liposomal cisplatin following convection enhanced delivery in normal and F98 glioma bearing rats

    OpenAIRE

    Tianyao Huo; Barth, Rolf F.; Weilian Yang; Nakkula, Robin J.; Rumiana Koynova; Boris Tenchov; Abhik Ray Chaudhury; Lawrence Agius; Teni Boulikas; Helene Elleaume; Lee, Robert J.

    2012-01-01

    International audience; 12 Hide Figures Abstract Introduction Materials and Methods Results Discussion Acknowledgments Author Contributions References Reader Comments (0) Figures Abstract The purpose of this study was to evaluate two novel liposomal formulations of cisplatin as potential therapeutic agents for treatment of the F98 rat glioma. The first was a commercially produced agent, Lipoplatin™, which currently is in a Phase III clinical trial for treatment of non-small cell lung cancer (...

  18. Chemical and morphological characteristics of solid metal-bearing phases deposited in snow and stream sediment as indicators of their origin.

    Science.gov (United States)

    Miler, Miloš; Gosar, Mateja

    2015-02-01

    Detailed scanning electron microscopy/energy dispersive spectroscopy of metal-bearing particles in snow deposits and stream sediment from a steelworks area was performed. Identified metal-bearing phases were apportioned according to their chemical and morphological characteristics to anthropogenic phases and secondary weathering products. Anthropogenic metal-bearing phases are the most abundant in both media and are represented by various irregular ferrous oxides, ferrous alloys, spherical ferrous oxides, and ferrous silicates with variable contents of Cr, Mn, Ni, V, W, and Mo. Secondary weathering products are Al silicates, Fe oxy-hydroxides, and Fe oxy-hydroxy sulfates with minor contents of transition metals, resulting from weathering of anthropogenic phases and Pb-Zn ore minerals from a closed Pb-Zn mine located upstream from the study area. Comparison of anthropogenic metal-bearing phases in both media showed agreement in their compositions and morphologies and indicated their sources are high-temperature processes in steel production. It also showed that spherical metal-bearing phases were transported by the same transport medium, which is the atmosphere, while other phases were transported into stream sediment mostly by other pathways, such as precipitation runoff over contaminated surfaces.

  19. Magnetic Bearing

    Science.gov (United States)

    1996-01-01

    AVCON, Inc. produces advanced magnetic bearing systems for industrial use, offering a unique technological approach based on contract work done at Marshall Space Flight Center and Lewis Research Center. Designed for the turbopump of the Space Shuttle main engine, they are now used in applications such as electric power generation, petroleum refining, machine tool operation and natural gas pipelines. Magnetic bearings support moving machinery without physical contact; AVCON's homopolar approach is a hybrid of permanent and electromagnets which are one-third the weight, smaller and more power- efficient than previous magnetic bearings.

  20. Foil bearings

    Science.gov (United States)

    Elrod, David A.

    1993-01-01

    The rolling element bearings (REB's) which support many turbomachinery rotors offer high load capacity, low power requirements, and durability. Two disadvantages of REB's are: (1) rolling or sliding contact within the bearing has life-limiting consequences; and (2) REB's provide essentially no damping. The REB's in the Space Shuttle Main Engine (SSME) turbopumps must sustain high static and dynamic loads, at high speeds, with a cryogenic fluid as lubricant and coolant. The pump end ball bearings limit the life of the SSME high pressure oxygen turbopump (HPOTP). Compliant foil bearing (CFB) manufacturers have proposed replacing turbopump REB's with CFB's CFB's work well in aircraft air cycle machines, auxiliary power units, and refrigeration compressors. In a CFB, the rotor only contracts the foil support structure during start up and shut down. CFB damping is higher than REB damping. However, the load capacity of the CFB is low, compared to a REB. Furthermore, little stiffness and damping data exists for the CFB. A rotordynamic analysis for turbomachinery critical speeds and stability requires the input of bearing stiffness and damping coefficients. The two basic types of CFB are the tension-dominated bearing and the bending-dominated bearing. Many investigators have analyzed and measured characteristics of tension-dominated foil bearings, which are applied principally in magnetic tape recording. The bending-dominated CFB is used more in rotating machinery. This report describes the first phase of a structural analysis of a bending-dominated, multileaf CFB. A brief discussion of CFB literature is followed by a description and results of the present analysis.

  1. Foil bearings

    Science.gov (United States)

    Elrod, David A.

    1993-11-01

    The rolling element bearings (REB's) which support many turbomachinery rotors offer high load capacity, low power requirements, and durability. Two disadvantages of REB's are: (1) rolling or sliding contact within the bearing has life-limiting consequences; and (2) REB's provide essentially no damping. The REB's in the Space Shuttle Main Engine (SSME) turbopumps must sustain high static and dynamic loads, at high speeds, with a cryogenic fluid as lubricant and coolant. The pump end ball bearings limit the life of the SSME high pressure oxygen turbopump (HPOTP). Compliant foil bearing (CFB) manufacturers have proposed replacing turbopump REB's with CFB's CFB's work well in aircraft air cycle machines, auxiliary power units, and refrigeration compressors. In a CFB, the rotor only contracts the foil support structure during start up and shut down. CFB damping is higher than REB damping. However, the load capacity of the CFB is low, compared to a REB. Furthermore, little stiffness and damping data exists for the CFB. A rotordynamic analysis for turbomachinery critical speeds and stability requires the input of bearing stiffness and damping coefficients. The two basic types of CFB are the tension-dominated bearing and the bending-dominated bearing. Many investigators have analyzed and measured characteristics of tension-dominated foil bearings, which are applied principally in magnetic tape recording. The bending-dominated CFB is used more in rotating machinery. This report describes the first phase of a structural analysis of a bending-dominated, multileaf CFB. A brief discussion of CFB literature is followed by a description and results of the present analysis.

  2. Local and systemic chemotherapy with taurolidine and taurolidine/heparin in colon cancer-bearing rats undergoing laparotomy.

    Science.gov (United States)

    Braumann, Chris; Ordemann, Jürgen; Kilian, Maik; Wenger, Frank A; Jacobi, Christoph A

    2003-01-01

    Experimental studies in the therapy of malignant abdominal tumors have shown that different cytotoxic agents suppress the intraperitoneal tumor growth. Nevertheless, a general accepted approach to prevent tumor recurrences does not exist. Following subcutaneous and intraperitoneal injection of 10(4) colon adenocarcinoma cells (DHD/K12/TRb), the influences of both taurolidine or taurolidine/heparin on intraperitoneal and subcutaneous tumor growth was investigated in 105 rats undergoing midline laparotomy. The animals were randomized into 7 groups and operated on during 30 min. To investigate the intraperitoneal (local) influence of either taurolidine or heparin on tumor growth, the substances were applied intraperitoneally. Systemic and intraperitoneal effects were evaluated after intravenous injection of the substances. Both application forms were also combined to analyze synergistic effects. Tumor weights, as well as the incidence of abdominal wound metastases, were determined four weeks after the intervention. In order to evaluate the effects of the agents, blood was taken to determine the peripheral leukocytes counts. Intraperitoneal tumor growth in rats receiving intraperitoneal application of taurolidine (median 7.0 mg, P = 0.05) and of taurolidine/heparin (median 0 mg, P = 0.02) was significantly reduced when compared to the control group (median 185 mg). The simultaneous instillation of both agents also reduced the intraperitoneal tumor growth (median 4 mg, P = 0.04), while the intravenous injection of the substances caused no local effect. In contrast, the subcutaneous tumor growth did not differ among all groups. In all groups, abdominal wound recurrences were rare and did not differ. Independent of the agents and the application form, the operation itself caused a slight leukopenia shortly after the operation and a leukocytosis in the following course. Intraperitoneal therapy of either taurolidine or in combination with heparin inhibits local tumor growth

  3. Early gene expression analysis in 9L orthotopic tumor-bearing rats identifies immune modulation in molecular response to synchrotron microbeam radiation therapy.

    Science.gov (United States)

    Bouchet, Audrey; Sakakini, Nathalie; El Atifi, Michèle; Le Clec'h, Céline; Brauer, Elke; Moisan, Anaïck; Deman, Pierre; Rihet, Pascal; Le Duc, Géraldine; Pelletier, Laurent

    2013-01-01

    Synchrotron Microbeam Radiation Therapy (MRT) relies on the spatial fractionation of the synchrotron photon beam into parallel micro-beams applying several hundred of grays in their paths. Several works have reported the therapeutic interest of the radiotherapy modality at preclinical level, but biological mechanisms responsible for the described efficacy are not fully understood to date. The aim of this study was to identify the early transcriptomic responses of normal brain and glioma tissue in rats after MRT irradiation (400Gy). The transcriptomic analysis of similarly irradiated normal brain and tumor tissues was performed 6 hours after irradiation of 9 L orthotopically tumor-bearing rats. Pangenomic analysis revealed 1012 overexpressed and 497 repressed genes in the irradiated contralateral normal tissue and 344 induced and 210 repressed genes in tumor tissue. These genes were grouped in a total of 135 canonical pathways. More than half were common to both tissues with a predominance for immunity or inflammation (64 and 67% of genes for normal and tumor tissues, respectively). Several pathways involving HMGB1, toll-like receptors, C-type lectins and CD36 may serve as a link between biochemical changes triggered by irradiation and inflammation and immunological challenge. Most immune cell populations were involved: macrophages, dendritic cells, natural killer, T and B lymphocytes. Among them, our results highlighted the involvement of Th17 cell population, recently described in tumor. The immune response was regulated by a large network of mediators comprising growth factors, cytokines, lymphokines. In conclusion, early response to MRT is mainly based on inflammation and immunity which appear therefore as major contributors to MRT efficacy.

  4. Effect of iron content on the structure and disorder of iron-bearing sodium silicate glasses: A high-resolution 29Si and 17O solid-state NMR study

    Science.gov (United States)

    Kim, Hyo-Im; Sur, Jung Chul; Lee, Sung Keun

    2016-01-01

    Despite its geochemical importance and implications for the properties of natural magmatic melts, understanding the detailed structure of iron-bearing silicate glasses remains among the outstanding problems in geochemistry. This is mainly because solid-state NMR techniques, one of the most versatile experimental methods to probe the structure of oxide glasses, cannot be fully utilized for exploring the structural details of iron-bearing glasses as the unpaired electrons in Fe induce strong local magnetic fields that mask the original spectroscopic features (i.e., paramagnetic effect). Here, we report high-resolution 29Si and 17O solid-state NMR spectra of iron-bearing sodium silicate glasses (Na2O-Fe2O3-SiO2, Fe3+/ΣFe = 0.89 ± 0.04, thus containing both ferric and ferrous iron) with varying XFe2O3 [=Fe2O3/(Na2O + Fe2O3)], containing up to 22.9 wt% Fe2O3. This compositional series involves Fe-Na substitution at constant SiO2 contents of 66.7 mol% in the glasses. For both nuclides, the NMR spectra exhibit a decrease in the signal intensities and an increase in the peak widths with increasing iron concentration partly because of the paramagnetic effect. Despite the intrinsic difficulties that result from the pronounced paramagnetic effect, the 29Si and 17O NMR results yield structural details regarding the effect of iron content on Q speciation, spatial distribution of iron, and the extent of polymerization in the iron-bearing silicate glasses. The 29Si NMR spectra show an apparent increase in highly polymerized Q species with increasing XFe2O3 , suggesting an increase in the degree of melt polymerization. The 17O 3QMAS NMR spectra exhibit well-resolved non-bridging oxygen (NBO, Na-O-Si) and bridging oxygen (BO, Si-O-Si) peaks with varying iron concentration. By replacing Na2O with Fe2O3 (and thus with increasing iron content), the fraction of Na-O-Si decreases. Quantitative consideration of this effect confirms that the degree of polymerization is likely to

  5. Rat Liver Enzyme Release Depends on Blood Flow-Bearing Physical Forces Acting in Endothelium Glycocalyx rather than on Liver Damage

    Directory of Open Access Journals (Sweden)

    Julieta A. Díaz-Juárez

    2017-01-01

    Full Text Available We have found selective elevation of serum enzyme activities in rats subjected to partial hepatectomy (PH, apparently controlled by hemodynamic flow-bearing physical forces. Here, we assess the involvement of stretch-sensitive calcium channels and calcium mobilization in isolated livers, after chemical modifications of the endothelial glycocalyx and changing perfusion directionality. Inhibiting in vivo protein synthesis, we found that liver enzyme release is influenced by de novo synthesis of endothelial glycocalyx components, and released enzymes are confined into a liver “pool.” Moreover, liver enzyme release depended on extracellular calcium entry possibly mediated by stretch-sensitive calcium channels, and this endothelial-mediated mechanotransduction in liver enzyme release was also evidenced by modifying the glycocalyx carbohydrate components, directionality of perfusing flow rate, and the participation of nitric oxide (NO and malondialdehyde (MDA, leading to modifications in the intracellular distribution of these enzymes mainly as nuclear enrichment of “mitochondrial” enzymes. In conclusion, the flow-induced shear stress may provide fine-tuned control of released hepatic enzymes through mediation by the endothelium glycocalyx, which provides evidence of a biological role of the enzyme release rather to be merely a biomarker for evaluating hepatotoxicity and liver damage, actually positively influencing progression of liver regeneration in mammals.

  6. Metabolic and morphological alterations induced by proteolysis-inducing factor from Walker tumour-bearing rats in C2C12 myotubes

    Directory of Open Access Journals (Sweden)

    Tisdale Michael J

    2008-01-01

    Full Text Available Abstract Background Patients with advanced cancer suffer from cachexia, which is characterised by a marked weight loss, and is invariably associated with the presence of tumoral and humoral factors which are mainly responsible for the depletion of fat stores and muscular tissue. Methods In this work, we used cytotoxicity and enzymatic assays and morphological analysis to examine the effects of a proteolysis-inducing factor (PIF-like molecule purified from ascitic fluid of Walker tumour-bearing rats (WF, which has been suggested to be responsible for muscle atrophy, on cultured C2C12 muscle cells. Results WF decreased the viability of C2C12 myotubes, especially at concentrations of 20–25 μg.mL-1. There was an increase in the content of the pro-oxidant malondialdehyde, and a decrease in antioxidant enzyme activity. Myotubes protein synthesis decreased and protein degradation increased together with an enhanced in the chymotrypsin-like enzyme activity, a measure of functional proteasome activity, after treatment with WF. Morphological alterations such as cell retraction and the presence of numerous cells in suspension were observed, particularly at high WF concentrations. Conclusion These results indicate that WF has similar effects to those of proteolysis-inducing factor, but is less potent than the latter. Further studies are required to determine the precise role of WF in this experimental model.

  7. Tissue distribution of 2-methoxyestradiol nanosuspension in rats and its antitumor activity in C57BL/6 mice bearing lewis lung carcinoma.

    Science.gov (United States)

    Shen, Guopeng; Wang, Qingyu; Zhang, Qingqing; Sun, Huibin; Zhao, Ya; Zhang, Zhenzhong; Du, Bin

    2012-01-01

    The purpose of the present study was to evaluate the tissue distribution and antitumor activity of 2-methoxyestradiol (2-ME) nanosuspension compared with 2-ME solution both in vitro and in vivo. 2-ME nanosuspension was made by nanoprecipitation-high-frequency ultrasonication method with the particle size of 168.4 ± 3.2 nm and the zeta potential of -29.79 ± 1.89 mV. The overall targeting efficiency (TE(Q)) of 2-ME nanosuspension was improved from 28.71 to 51.95% in the lung of rats. MTT assay showed that 2-ME nanosuspension could significantly enhance the in vitro cytotoxicity against lewis lung carcinoma (LLC) cells compared with the 2-ME solution, the IC(50) at 72 h was reduced from 6.35 µM for 2-ME solution to 3.56 µM for 2-ME nanosuspension. The antitumor activity in vivo was investigated in C57BL/6 mice bearing LLC, and the results indicated that 2-ME nanosuspension not only exhibited significant suppression of the tumor growth when compared with that of positive group or cyclophosphamide group at the same dose, but also enhanced the spleen indices. Overall, 2-ME nanosuspension could mainly deliver the drug to lungs and made the drug accumulate in the lungs, so 2-ME nanosuspension has a possible lung cancer therapeutic potential.

  8. Rat Liver Enzyme Release Depends on Blood Flow-Bearing Physical Forces Acting in Endothelium Glycocalyx rather than on Liver Damage

    Science.gov (United States)

    Díaz-Juárez, Julieta A.

    2017-01-01

    We have found selective elevation of serum enzyme activities in rats subjected to partial hepatectomy (PH), apparently controlled by hemodynamic flow-bearing physical forces. Here, we assess the involvement of stretch-sensitive calcium channels and calcium mobilization in isolated livers, after chemical modifications of the endothelial glycocalyx and changing perfusion directionality. Inhibiting in vivo protein synthesis, we found that liver enzyme release is influenced by de novo synthesis of endothelial glycocalyx components, and released enzymes are confined into a liver “pool.” Moreover, liver enzyme release depended on extracellular calcium entry possibly mediated by stretch-sensitive calcium channels, and this endothelial-mediated mechanotransduction in liver enzyme release was also evidenced by modifying the glycocalyx carbohydrate components, directionality of perfusing flow rate, and the participation of nitric oxide (NO) and malondialdehyde (MDA), leading to modifications in the intracellular distribution of these enzymes mainly as nuclear enrichment of “mitochondrial” enzymes. In conclusion, the flow-induced shear stress may provide fine-tuned control of released hepatic enzymes through mediation by the endothelium glycocalyx, which provides evidence of a biological role of the enzyme release rather to be merely a biomarker for evaluating hepatotoxicity and liver damage, actually positively influencing progression of liver regeneration in mammals. PMID:28337244

  9. Biodistribution and pharmacokinetics in rats and antitumor effect in various types of tumor-bearing mice of novel self-assembled gelatin-oleic acid nanoparticles containing paclitaxel.

    Science.gov (United States)

    Tran, Phuong Ha-Lien; Tran, Thao Truong-Dinh; Lee, Beom-Jin

    2014-01-01

    The aim of this study was to investigate the pharmacokinetics and biodistribution in Sprague-Dawley rats, anti-tumor activity and acute toxicity in different tumor-bearing mice of novel biocompatible nanoparticles. Paclitaxel (PTX) was selected as a model drug and loaded on different tumor types and at various doses. The nanoparticles were prepared using a newly synthesized gelatin-oleic acid conjugate via self-assembly in an aqueous solution. The nanoparticles were further functionalized using folic acid (FA) as a targeting ligand for cancer. The in vivo effects of the nanoparticles were compared with the commercially available Taxol (a solution form of PTX) as a reference dosage form. The in vivo studies confirmed that nanoparticles showed improved therapeutic effects on tumors and significantly reduced the toxic effects associated with Taxol, even at the 50% lethal dose (LD50). The in vivo pharmacokinetic parameters and biodistribution of the nanoparticles containing PTX also indicated slower clearance, longer blood circulation and higher tumor selectivity. Furthermore, the functionalized nanoparticles with FA were more effective than the non-functionalized nanoparticles. Thus, the suitable properties of gelatin-oleic nanoparticles (GON) as a drug carrier and the effective targeting ligand could synergistically maximize the in vivo anti-tumor efficacy resulting in delayed tumor volume growth and hence, providing versatile strategies in cancer therapy and drug delivery.

  10. Anti-inflammatory effects and hepatotoxicity of Tripterygium-loaded solid lipid nanoparticles on adjuvant-induced arthritis in rats.

    Science.gov (United States)

    Xue, Mei; Jiang, Zhen-zhou; Wu, Tao; Li, Ji; Zhang, Liang; Zhao, Yan; Li, Xue-jun; Zhang, Lu-Yong; Yang, Shu-yu

    2012-08-15

    Tripterygium wilfordii Hook f. (TWHF) has been demonstrated to have anti-inflammatory, immunosuppressive effects and its clinical use was restricted to some extent due to some toxic effects on the digestive, urogenital, and blood circulatory systems, especially the male reproductive system. In the previous study, we had confirmed that TWHF-loaded solid lipid nanoparticles (SLN) have protective effects on male reproductive toxicity in rats. Anti-inflammatory effects and hepatotoxicity of TWHF-SLN remain to be unidentified. The present study was focused on the anti-inflammatory effect of complete Freund's adjuvant-induced arthritis in rats treated with TWHF-SLN as well as the effects of SLN delivery system on decreasing the hepatotoxicity induced by tripterygium. Sixty-four healthy male rats were randomly divided into eight groups with eight rats each. From day 18 after FCA injection, TWHF-SLN group (120, 60, 30 mg/kg) and TWHF group (120, 60, 30 mg/kg) were administered by oral gavage for 24 consecutive days. The control group was with saline and model control group was without any treatment. The volume of the right hind paws was evaluated at 0, 4, 8, 12, 18, 24, 30, 36 and 42 days post-injection of FCA by a home-made connected device. The serum alanine aminotransferase (ALT), aspartate aminotransferase (AST), alkaline phosphatase (ALP), γ-glutamyl transpeptidase (GGT), total bilirubin (TBIL) and albumin (ALB) levels were evaluated by an autoanalyzer. Activities of superoxide dismutase (SOD), glutathione peroxidase (GSH-PX) malondialdehyde (MDA) and xanthine oxidase (XOD) levels were determined using commercial kits. The PG level in sera was examined by double antibody sandwich method. Tissue histopathology was evaluated with hematoxylin and eosin (H&E). The results show that TWHF-SLN can significantly reduce rat paw volume at 60 mg/kg (pinduced hepatotoxicity.

  11. Synthesis of O-(3-[{sup 18}F]Fluoropropyl)-L-tyrosine (L-[{sup 18}F]FPT) and Its Biological Evaluation in 9L Tumor Bearing Rat

    Energy Technology Data Exchange (ETDEWEB)

    Moon, Byung Seok; Lee, Tae Sup; Lee, Kyo Chul; An, Gwang Il; Yang, Seung Dae; Choi, Chang Woon; Lim, Sang Moo; Chun, Kwon Soo [Korea Institute of Radiological and Medical Sciences, Seoul (Korea, Republic of); Chi, Dae Yoon [Inha Univ., Inchon (Korea, Republic of)

    2005-07-01

    acid tracer like [{sup 18}F]FET for tumor imaging, a direct comparison of [{sup 18}F]FET and [{sup 18}F]FPT has not been performed in brain tumor model. In this study, we developed novel method to promote the radiochemical yield with fluoropropyl tyrosine derivative from the mentioned results and evaluate the feasibility of [{sup 18}F]FPT as a new brain tumor imaging agent. Biological properties of [{sup 18}F]FPT were compared with those of [{sup 18}F]FET in 9L tumor bearing rat. Furthermore, PET imaging of [{sup 18}F]FPT was acquired in 9L tumor bearing rat.

  12. Arsenic waste management: a critical review of testing and disposal of arsenic-bearing solid wastes generated during arsenic removal from drinking water.

    Science.gov (United States)

    Clancy, Tara M; Hayes, Kim F; Raskin, Lutgarde

    2013-10-01

    Water treatment technologies for arsenic removal from groundwater have been extensively studied due to widespread arsenic contamination of drinking water sources. Central to the successful application of arsenic water treatment systems is the consideration of appropriate disposal methods for arsenic-bearing wastes generated during treatment. However, specific recommendations for arsenic waste disposal are often lacking or mentioned as an area for future research and the proper disposal and stabilization of arsenic-bearing waste remains a barrier to the successful implementation of arsenic removal technologies. This review summarizes current disposal options for arsenic-bearing wastes, including landfilling, stabilization, cow dung mixing, passive aeration, pond disposal, and soil disposal. The findings from studies that simulate these disposal conditions are included and compared to results from shorter, regulatory tests. In many instances, short-term leaching tests do not adequately address the range of conditions encountered in disposal environments. Future research directions are highlighted and include establishing regulatory test conditions that align with actual disposal conditions and evaluating nonlandfill disposal options for developing countries.

  13. Vascular Imaging of Solid Tumors in Rats with a Radioactive Arsenic-Labeled Antibody that Binds Exposed Phosphatidylserine

    Science.gov (United States)

    Jennewein, Marc; Lewis, Matthew A.; Zhao, Dawen; Tsyganov, Edward; Slavine, Nikolai; He, Jin; Watkins, Linda; Kodibagkar, Vikram D.; O'Kelly, Sean; Kulkarni, Padmakar; Antich, Peter P.; Hermanne, Alex; Roösch, Frank; Mason, Ralph P.; Thorpe, Philip E.

    2012-01-01

    Purpose We recently reported that anionic phospholipids, principally phosphatidylserine, become exposed on the external surface of vascular endothelial cells in tumors, probably in response to oxidative stresses present in the tumor microenvironment. In the present study, we tested the hypothesis that a chimeric monoclonal antibody that binds phosphatidylserine could be labeled with radioactive arsenic isotopes and used for molecular imaging of solid tumors in rats. Experimental Design Bavituximab was labeled with 74As (β+,T1/2 17.8 days) or 77As (β−,T1/2 1.6 days) using a novel procedure. The radionuclides of arsenic were selected because their long half-lives are consistent with the long biological half lives of antibodies in vivo and because their chemistry permits stable attachment to antibodies. The radiolabeled antibodies were tested for the ability to image subcutaneous Dunning prostate R3227-AT1 tumors in rats. Results Clear images of the tumors were obtained using planar γ-scintigraphy and positron emission tomography. Biodistribution studies confirmed the specific localization of bavituximab to the tumors. The tumor-to-liver ratio 72 h after injection was 22 for bavituximab compared with 1.5 for an isotype-matched control chimeric antibody of irrelevant specificity. Immunohistochemical studies showed that the bavituximab was labeling the tumor vascular endothelium. Conclusions These results show that radioarsenic-labeled bavituximab has potential as a new tool for imaging the vasculature of solid tumors. PMID:18316558

  14. Hydrodynamic bearings

    CERN Document Server

    Bonneau, Dominique; Souchet, Dominique

    2014-01-01

    This Series provides the necessary elements to the development and validation of numerical prediction models for hydrodynamic bearings. This book describes the rheological models and the equations of lubrication. It also presents the numerical approaches used to solve the above equations by finite differences, finite volumes and finite elements methods.

  15. Variation in Scent Compounds of Oil-Bearing Rose (Rosa damascena Mill.) Produced by Headspace Solid Phase Microextraction, Hydrodistillation and Solvent Extraction

    OpenAIRE

    Sabri Erbaş; Hasan Baydar

    2016-01-01

    In this research, rose oil and rose water were hydro-distilled from the fresh oil-bearing rose flowers (Rosa damascena Mill.) using Clevenger-type apparatus. Rose concretes were extracted from the fresh rose flowers by using non-polar solvents, e.g. diethyl ether, petroleum ether, cyclo-hexane, chloroform and n-hexane, and subsequently by evaporation of the solvents under vacuum. Absolutes were produced from the concretes with ethyl alcohol extraction at -20°C, leaving behind the wax and othe...

  16. Combination Ointment Containing Solid Tranilast Nanoparticles and Dissolved Sericin Is Efficacious for Treating Skin Wound-Healing Deficits and Redness in Diabetic Rats.

    Science.gov (United States)

    Nagai, Noriaki; Ogata, Fumihiko; Deguchi, Saori; Ueno, Akina; Kawasaki, Naohito; Ito, Yoshimasa

    2017-01-01

    We attempted to design a combination ointment containing solid tranilast nanoparticles and dissolved sericin as a wound-healing drug (TS-combination ointment), and evaluated its usefulness as therapy for wound-healing deficits in streptozotocin-induced diabetic rat (STZ rat) using kinetic analyses as an index. Solid tranilast nanoparticles were prepared by bead mill methods with low-substituted methylcellulose; the mean particle size of the tranilast nanoparticles was 70 nm. The ointment was designed to contain the tranilast nanoparticles plus sericin powder and/or Carbopol(®) 934. Skin wound healing in STZ rats begins significantly later than in normal rats. Although the skin wound healing rate in STZ rats treated with an ointment containing tranilast nanoparticles was lower than in STZ rats treated with vehicle, the ointment was effective in reducing redness. An ointment containing sericin enhanced the skin-healing rate, but the preventive effect on redness was weak. On the other hand, the combination of tranilast and sericin increased both the skin healing rate and reduction in redness. In conclusion, we have adapted kinetic analyses to skin wound healing in rats, and found these analyses to be useful as an index of wound healing ability by a wound-healing drug. In addition, we show that treatment with the TS-combination ointment enhances the skin wound healing rate and reduces redness. These findings provide information significant to the search for new wound-healing therapies and for the design of wound-healing drugs.

  17. Novel nano bearings constructed by physical adsorption

    Science.gov (United States)

    Zhang, Yongbin

    2015-09-01

    The paper proposes a novel nano bearing formed by the physical adsorption of the confined fluid to the solid wall. The bearing is formed between two parallel smooth solid plane walls sliding against one another, where conventional hydrodynamic lubrication theory predicted no lubricating effect. In this bearing, the stationary solid wall is divided into two subzones which respectively have different interaction strengths with the lubricating fluid. It leads to different physical adsorption and slip properties of the lubricating fluid at the stationary solid wall respectively in these two subzones. It was found that a significant load-carrying capacity of the bearing can be generated for low lubricating film thicknesses, because of the strong physical adsorption and non-continuum effects of the lubricating film.

  18. Segmented Hybrid Gasostatic Bearing Optimization

    Directory of Open Access Journals (Sweden)

    Prodan Nikolay Vasilevich

    2014-07-01

    Full Text Available The purpose of research-development of methods of numerical optimization rotatable support pads gasostatic hybrid bearing. In the world‘s aerospace engineering the gas-dynamic bearings are currently most common. They are characterized by the supporting layer of different designs, which ensures the workability of the rotors during starts and stops. The main problem of this bearing type, apart from the construction complexity is the wear of this supporting layer. Gas-static bearing has no such defect, since there is no physical contact between solid surfaces. This study presents the results of the hybrid bearing’s calculation, combining both technologies. The slotted nozzle of non-conventional shape that mirrors the solution of Reynolds equation’s isoline is studied. The dependences of the main parameters on the speed of the shaft’s rotation are discussed. The aerodynamic resistance of pads for different regimes of operation is investigated.

  19. (18)F-FLT and (18)F-FDG PET-CT imaging in the evaluation of early therapeutic effects of chemotherapy on Walker 256 tumor-bearing rats.

    Science.gov (United States)

    Xu, Weina; Yu, Shupeng; Xin, Jun; Guo, Qiyong

    2016-12-01

    The present study aimed to evaluate the early therapeutic effects of chemotherapy on Walker 256 tumor-bearing Wistar rats via F-18-fluoro-3'-deoxy-3'-L-fluorothymidine ((18)F-FLT) and F-18-fluoro-deoxyglucose ((18)F-FDG) positron emission tomography-computed tomography (PET-CT) imaging. Walker 256 tumor-bearing Wistar rats were subjected to (18)F-FLT and (18)F-FDG PET-CT imaging prior to and 24 and 48 h after epirubicin chemotherapy. (18)F-FLT and (18)F-FDG uptake [tumor/muscle (T/M)], the percentage of injected dose per gram (% ID/g), and the Ki-67 labeling index (LI-Ki-67) were quantitatively determined for each rat prior to and following epirubicin chemotherapy. The correlation between % ID/g and tumor LI-Ki-67 was analyzed. Both (18)F-FLT and (18)F-FDG tumor uptake decreased significantly at 24 and 48 h after chemotherapy (Ptumor uptake correlated positively with LI-Ki-67 before and after chemotherapy (r=0.842 and 0.813, respectively). During the early post-chemotherapy stage, (18)F-FLT and (18)F-FDG uptake in Walker 256 tumors reduced significantly, which correlated positively with the tumor cell proliferative activity.

  20. Hepatoprotective effects of sesamol loaded solid lipid nanoparticles in carbon tetrachloride induced sub-chronic hepatotoxicity in rats.

    Science.gov (United States)

    Singh, Neha; Khullar, Neeraj; Kakkar, Vandita; Kaur, Indu Pal

    2016-05-01

    Sesamol is a phenolic component of sesame seed oil, which has been established as an antioxidant and also possesses potential for hepatoprotection. However, its protective role in carbon tetrachloride (CCl4 ) induced sub-chronic hepatotoxicity has not been studied. Limited oral bioavailability (BA) and rapid elimination (as conjugates) in rats is reported for sesamol. Considering its significant antioxidant potential and compromised BA, we packaged sesamol into solid lipid nanoparticles (S-SLNs) to enhance its hepatoprotective bioactivity. S-SLNs prepared by microemulsification method were nearly spherical in shape with an average particle size of 120.30 nm and their oral administration at 8 mg/kg body weight (BW) showed significantly (p induced sub-chronic liver injury in rats. Evaluations were done in terms of histological changes in the liver tissue, liver injury markers (serum alanine aminotransferase, serum aspartate aminotransferase, and serum lactate dehydrogenase); oxidative stress markers (lipid peroxidation, superoxide dismutase, and reduced glutathione) and proinflammatory response marker (tumor necrosis factor-alpha).

  1. Enhanced in vivo absorption of CB-1 antagonist in rats via solid solutions prepared by hot-melt extrusion.

    Science.gov (United States)

    Ranzani, L S; Font, J; Galimany, F; Santanach, A; Gomez-Gomar, A M; Casadevall, G; Gryczke, A

    2011-06-01

    The aim of the present work was to investigate in vitro dissolution properties of three binary solid solutions prepared by a hot-melt extrusion (HME) process with vinyl pirrolidone--vinyl acetate copolymer (Kollidon VA 64), ethyl acrylate, methyl methacrylate polymer (Eudragit E) polyetilenglicol 8000 (PEG 8000) with a cannabinoid type 1 (CB-1) antagonist. Hansen solubility parameters were calculated from the chemical structures of the drug and the individual polymers in order to predict miscibility. Solid state characterizations of drug substance, physical blends and HME formulations were performed with differential scanning calorimetry. The dissolution testing conducted under sink conditions revealed that the dissolution rate of HME formulations improved around 1.8-fold vs drug substance. Supersaturation dissolution study demonstrated that HME formulations composed by Eudragit E and Kollidon VA64 increased drug solubility between 30- and 35-fold, respectively comparing to the drug substance. Physical and chemical stability of formulations were studied at 40°C/75%HR with open dish during 15 days. The formulation composed by the drug and Eudragit E at 10:90 was evaluated for in vivo drug absorption in male Wistar-Hannover rats and it was found to increase CB-1 absorption threefold greater than pure drug oral suspension.

  2. Time-frequency analyses of fluid-solid interaction under sinusoidal translational shear deformation of the viscoelastic rat cerebrum

    Science.gov (United States)

    Leahy, Lauren N.; Haslach, Henry W.

    2017-06-01

    During normal extracellular fluid (ECF) flow in the brain glymphatic system or during pathological flow induced by trauma resulting from impacts and blast waves, ECF-solid matter interactions result from sinusoidal shear waves in the brain and cranial arterial tissue, both heterogeneous biological tissues with high fluid content. The flow in the glymphatic system is known to be forced by pulsations of the cranial arteries at about 1 Hz. The experimental shear stress response to sinusoidal translational shear deformation at 1 Hz and 25% strain amplitude and either 0% or 33% compression is compared for rat cerebrum and bovine aortic tissue. Time-frequency analyses aim to correlate the shear stress signal frequency components over time with the behavior of brain tissue constituents to identify the physical source of the shear nonlinear viscoelastic response. Discrete fast Fourier transformation analysis and the novel application to the shear stress signal of harmonic wavelet decomposition both show significant 1 Hz and 3 Hz components. The 3 Hz component in brain tissue, whose magnitude is much larger than in aortic tissue, may result from interstitial fluid induced drag forces. The harmonic wavelet decomposition locates 3 Hz harmonics whose magnitudes decrease on subsequent cycles perhaps because of bond breaking that results in easier fluid movement. Both tissues exhibit transient shear stress softening similar to the Mullins effect in rubber. The form of a new mathematical model for the drag force produced by ECF-solid matter interactions captures the third harmonic seen experimentally.

  3. Ultrasound-activated agents comprised of 5FU-bearing nanoparticles bonded to microbubbles inhibit solid tumor growth and improve survival.

    Science.gov (United States)

    Burke, Caitlin W; Alexander, Eben; Timbie, Kelsie; Kilbanov, Alexander L; Price, Richard J

    2014-02-01

    Nanoparticle (NP) drug delivery vehicles may eventually offer improved tumor treatments; however, NP delivery from the bloodstream to tumors can be hindered by poor convective and/or diffusive transport. We tested whether poly(lactic-co-glycolic acid) NP delivery can be improved by covalently linking them to ultrasound (US)-activated microbubbles in a "composite-agent" formulation and whether drug 5-fluorouracil (5FU)-loaded NPs delivered in this fashion inhibit the growth of tumors that are typically not responsive to intravenously administered 5FU. After intravenous composite-agent injection, C6 gliomas implanted on Rag-1(-/-) mice were exposed to pulsed 1 MHz US, resulting in the delivery of 16% of the initial NP dose per gram tissue. This represented a five- to 57-fold increase in NP delivery when compared to multiple control groups. 5FU-bearing NP delivery from the composite-agent formulation resulted in a 67% reduction in tumor volume at 7 days after treatment, and animal survival increased significantly when compared to intravenous soluble 5FU administration. We conclude that NP delivery from US-activated composite agents may improve tumor treatment by offering a combination of better targeting, enhanced payload delivery, and controlled local drug release.

  4. Brain targeting effect of camptothecin-loaded solid lipid nanoparticles in rat after intravenous administration

    DEFF Research Database (Denmark)

    Martins, S. M.; Sarmento, B.; Nunes, C.

    2013-01-01

    This study intended to investigate the ability of solid lipid nanoparticles (SLN) to deliver camptothecin into the brain parenchyma after crossing the blood-brain barrier. For that purpose, camptothecin-loaded SLN with mean size below 200 nm, low polydispersity index (94%) were produced. Synchrot......This study intended to investigate the ability of solid lipid nanoparticles (SLN) to deliver camptothecin into the brain parenchyma after crossing the blood-brain barrier. For that purpose, camptothecin-loaded SLN with mean size below 200 nm, low polydispersity index (94%) were produced...... organs, when encapsulated into SLN, with consequent decrease in potential side toxicological effects. These results confirmed the potential of camptothecin-loaded SLN for antitumour brain treatments....

  5. Titanium carbide coatings for aerospace ball bearings

    Science.gov (United States)

    Boving, Hans J.; Haenni, Werner; Hintermann, HANS-E.

    1988-01-01

    In conventional ball bearings, steel to steel contacts between the balls and the raceways are at the origin of microwelds which lead to material transfer, surface roughening, lubricant breakdown, and finally to a loss in the bearing performances. To minimize the microwelding tendencies of the contacting partners it is necessary to modify their surface materials; the solid to solid collisions themselves are difficult to avoid. The use of titanium carbide coated steel balls can bring spectacular improvements in the performances and lifetimes of both oil-grease lubricated and oil-grease free bearings in a series of severe applications.

  6. Mechanisms of high-temperature, solid-state flow in minerals and ceramics and their bearing on the creep behavior of the mantle

    Science.gov (United States)

    Kirby, S.H.; Raleigh, C.B.

    1973-01-01

    The problem of applying laboratory silicate-flow data to the mantle, where conditions can be vastly different, is approached through a critical review of high-temperature flow mechanisms in ceramics and their relation to empirical flow laws. The intimate association of solid-state diffusion and high-temperature creep in pure metals is found to apply to ceramics as well. It is shown that in ceramics of moderate grain size, compared on the basis of self-diffusivity and elastic modulus, normalized creep rates compare remarkably well. This comparison is paralleled by the near universal occurrence of similar creep-induced structures, and it is thought that the derived empirical flow laws can be associated with dislocation creep. Creep data in fine-grained ceramics, on the other hand, are found to compare poorly with theories involving the stress-directed diffusion of point defects and have not been successfully correlated by self-diffusion rates. We conclude that these fine-grained materials creep primarily by a quasi-viscous grain-boundary sliding mechanism which is unlikely to predominate in the earth's deep interior. Creep predictions for the mantle reveal that under most conditions the empirical dislocation creep behavior predominates over the mechanisms involving the stress-directed diffusion of point defects. The probable role of polymorphic transformations in the transition zone is also discussed. ?? 1973.

  7. Effect of Food Status on the Gastrointestinal Transit of Amphotericin B-Containing Solid Lipid Nanoparticles in Rats.

    Science.gov (United States)

    Amekyeh, Hilda; Billa, Nashiru; Yuen, Kah-Hay; Lim, Sheau Chin Sherlyn

    2016-10-01

    Amphotericin B (AmB) is poorly absorbed from the gastrointestinal tract. Recent studies have suggested enhanced drug absorption from solid lipid nanoparticles (SLN). Little is known of the fate of AmB absorption within the gastrointestinal tract, and no gastrointestinal transit study has yet been performed on AmB-containing nano-formulations. We aimed to investigate the effect of food on the gastrointestinal transit properties of an AmB-containing SLN in rats. Three SLNs containing AmB, paracetamol, or sulfasalazine were formulated using cocoa butter and beeswax as lipid matrices and simultaneously administered orally to Sprague-Dawley rats. Paracetamol and sulfapyridine were used as marker drugs for estimating gastric emptying and cecal arrival, respectively. The pharmacokinetic data generated for paracetamol and sulfapyridine were used in estimating the absorption of the AmB SLNs in the small and large intestines, respectively. A delayed rate of AmB absorption was observed in the fed state; however, the extent of absorption was not affected by food. Specifically, the percentages of AmB absorption during the fasted state in the stomach, small intestine, and colon were not significantly different from absorption within the respective regions in the fed state. In both states, however, absorption was highest in the colon and appeared to be a combination of absorption from the small intestine plus absorption proper within the colon. The study suggests that AmB SLN, irrespective of food status, is slowly but predominantly taken up by the lymph, making the small intestine the most favorable site for the delivery of the AmB SLNs.

  8. Application of the carbon dioxide-barium hydroxide hydrate gas-solid reaction for the treatment of dilute carbon dioxide-bearing gas streams

    Energy Technology Data Exchange (ETDEWEB)

    Haag, G.L.

    1983-09-01

    The removal of trace components from gas streams via irreversible gas-solid reactions in an area of interest to the chemical engineering profession. This research effort addresses the use of fixed beds of Ba(OH)/sub 2/ hydrate flakes for the removal of an acid gas, CO/sub 2/, from air that contains approx. 330 ppM/sub v/ CO/sub 2/. Areas of investigation encompassed: (1) an extensive literature review of Ba(OH)/sub 2/ hydrate chemistry, (2) microscale studies on 0.150-g samples to develop a better understanding of the reaction, (3) process studies at the macroscale level with 10.2-cm-ID fixed-bed reactors, and (4) the development of a model for predicting fixed-bed performance. Experimental studies indicated fixed beds of commercial Ba(OH)/sub 2/.8H/sub 2/O flakes at ambient temperatures to be capable of high CO/sub 2/-removal efficiencies (effluent concentrations <100 ppB), high reactant utilization (>99%), and an acceptable pressure drop (1.8 kPa/m at a superficial gas velocity of 13 cm/s). Ba(OH)/sub 2/.8H/sub 2/O was determined to be more reactive toward CO/sub 2/ than either Ba(OH)/sub 2/.3H/sub 2/O or Ba(OH)/sub 2/.1H/sub 2/O. A key variable in the development of this fixed-bed process was relative humidity. Operation at conditions with effluent relative humidities >60% resulted in significant recrystallization and restructuring of the flake and subsequent pressure-drop problems.

  9. Uranyl complexes formed with a para-t-butylcalix[4]arene bearing phosphinoyl pendant arms on the lower rim. Solid and solution studies

    Energy Technology Data Exchange (ETDEWEB)

    Ramirez, F. de M. [Instituto Nacional de Investigaciones Nucleares, La Marquesa, Ocoyoacac (Mexico). Dept. de Quimica; Varbanov, S. [Bulgarian Academy of Sciences, Sofia (Bulgaria). Inst. of Organic Chemistry with Center of Phytochemistry; Buenzli, J.C.G. [Ecole Polytechnique Federale de Lausanne (EPFL) (Switzerland). Inst. of Chemical Sciences and Engineering; Rivas-Silva, J.F.; Ocana-Bribiesca, M.A. [Instituto de Fisica de la BUAP, Puebla (Mexico); Cortes-Jacome, M.A.; Toledo-Antonio, J.A. [Instituto Mexicano del Petroleo/Programa de Ingenieria Molecular (Mexico)

    2012-07-01

    The current interest in functionalized calixarenes with phosphorylated pendant arms resides in their coordination ability towards f elements and capability towards actinide/rare earth separation. Uranyl cation forms 1:1 and 1:2 (M:L) complexes with a tetra-phosphinoylated p-tert-butylcalix[4]arene, B{sub 4}bL{sup 4}: UO{sub 2}(NO{sub 3}){sub 2}(B{sub 4}bL{sup 4}){sub n} . xH{sub 2}O (n = 1, x = 2, 1; n = 2, x = 6, 2). Spectroscopic data point to the inner coordination sphere of 1 containing one monodentate nitrate anion, one water molecule and the four phosphinoylated arms bound to UO{sub 2}{sup 2+} while in 2, uranyl is only coordinated to calixarene ligands. In both cases the U(VI) ion is 8-coordinate. Uranyl complexes display enhanced metal-centred luminescence due to energy transfer from the calixarene ligands; the luminescence decays are bi-exponential with associated lifetimes in the ranges 220 {mu}s < {tau}{sub s} < 250 {mu}s and 630 {mu}s < {tau}{sub L} < 640 {mu}s, pointing to the presence of two species with differently coordinated calixarene, as substantiated by a XPS study of U(4f{sub 5/2,7/2}), O(1s) and P(2p) levels on solid state samples. The extraction study of UO{sub 2}{sup 2+} cation and trivalent rare-earth (Y, La, Eu) ions from acidic nitrate media by B{sub 4}bL{sup 4} in chloroform shows the uranyl cation being much more extracted than rare earths. (orig.)

  10. Development of a monolithic polymer pipette for solid-phase extraction of liquiritigenin in rat plasma

    Institute of Scientific and Technical Information of China (English)

    Hong Wu Zhang; Kang Li; Zhi Xian Liang; Feng Yang Wang; Qi Wen Lu

    2012-01-01

    A monolithic polymer column with mixed-mode interaction was prepared by in situ polymerization in a 1000 μ,L pipette.Two kinds of monomers,butyl methacrylate (BMA) and 2-(dimethylamino)ethyl methacrylate (DMAM) were applied to constructing the mixed-mode interaction of monolithic polymer column.Its solid-phase extraction properties for liquiritigenin (LQG) were evaluated by high performance liquid chromatography (HPLC) with a gradient elution procedure.After the extraction procedure was optimized,the maximum binding capacity and extraction recovery following the optimal extraction procedure were investigated.Calibration curve was expressed as A =65.9C + 4.53 (r2 =0.998) with a linear range of 0.151-1.80 μg/mL.The experimental results indicate that the monolithic polymer pipette presents good extraction efficiency for LQG.It can be envisaged that the developed monolithic polymer pipette possesses the potential for its application to the enrichment of other flavonoids compounds being siniilar to the structure of LQG.

  11. A frustrating problem: accelerated blood clearance of PEGylated solid lipid nanoparticles following subcutaneous injection in rats.

    Science.gov (United States)

    Zhao, Yongxue; Wang, Chunling; Wang, Long; Yang, Qiang; Tang, Wenya; She, Zhennan; Deng, Yihui

    2012-08-01

    Colloidal particles have preferential access to the lymphatic system following subcutaneous administration, achieving lymphatic targeting by drug accumulation in the regional lymph nodes. Moreover, the surface PEGylated colloidal particles have shown enhanced drainage into lymphatics and uptake by macrophages of the regional lymph nodes after subcutaneous injection. Nevertheless, it is reported that upon repeated intravenous injection, the PEG-specific IgM produced by the administration of the PEGylated colloidal particles markedly accelerates the clearance of subsequent doses of PEGylated particles. In this article, we report that the first subcutaneous injection of PEGylated solid lipid nanoparticles also induces the intravenously administered PEGylated particles to be cleared very rapidly from the circulation, and the "ABC index," a parameter for the intensity of accelerated blood clearance, for subcutaneous injection was equivalent to or even lower than that following the first intravenous injection. Moreover, the small quantities of distributed particles in the spleen after the first s.c. dose but the significantly higher elimination rate of the second i.v. dose, strongly suggest that, in addition to the spleen, the regional lymph nodes also play a promotive role in this phenomenon, although the exact lymphocytes causing this phenomenon remain unclear. Our observations may thus have important implications for considering combination therapy with PEGylated productions requiring different administration routes such as intravenous and subcutaneous injection, and great care is needed. Copyright © 2012 Elsevier B.V. All rights reserved.

  12. Single step determination of PCB 126 and 153 in rat tissues by using solid phase microextraction/gas chromatography-mass spectrometry: Comparison with solid phase extraction and liquid/liquid extraction.

    Science.gov (United States)

    Poli, Diana; Caglieri, Andrea; Goldoni, Matteo; Castoldi, Anna F; Coccini, Teresa; Roda, Elisa; Vitalone, Annabella; Ceccatelli, Sandra; Mutti, Antonio

    2009-03-15

    A simple and reliable solid phase microextraction/gas chromatography-mass spectrometry (SPME/GC-MS) method was developed for the single-step determination of PCBs 126 and 153 in rat brain and serum, using liquid/liquid and solid phase extraction (SPE) as reference techniques. The multi-factor categorical experimental design used to study simultaneously the main parameters and their interactions affecting the efficiency of the method, showed that the use of an 85mum PA exposed at 100 degrees C for 40min was the optimum sampling condition for both PCBs. SPME was then validated by studying its linear dynamic (over two orders of magnitude), limits of detection (brain: 2ng/g, serum: 0.2ng/g) and analytical precision that was within 9% for SPME in both brain and serum. Finally, the method was used to determine the brain and blood target dose in mothers and pups after oral exposure of the mothers.

  13. Contact fatigue in rolling-element bearings

    CSIR Research Space (South Africa)

    Fernandes, PJL

    1997-06-01

    Full Text Available to that encountered along the pitch-line of gear teeth \\[1\\]. In the early stages of damage, pure rolling forms a highly polished surface, as shown in the case of a bearing cup from a large thrust (a) (b) Fig. 1. Schematic... the inner ring of a thrust bearing \\[5\\]. Extensive surface damage, probably resulting from the action of solid particles entrapped in the lubricating fluid, is clearly noticeable, as is the through- crack emanating from...

  14. Antimicrobial Cu-bearing stainless steel scaffolds.

    Science.gov (United States)

    Wang, Qiang; Ren, Ling; Li, Xiaopeng; Zhang, Shuyuan; Sercombe, Timothy B; Yang, Ke

    2016-11-01

    Copper-bearing stainless steel scaffolds with two different structures (Body Centered Cubic and Gyroid labyrinth) at two solid fractions (25% and 40%) were fabricated from both 316L powder and a mixture of 316L and elemental Cu powder using selective laser melting, and relative 316L scaffolds were served as control group. After processing, the antimicrobial testing demonstrated that the 316L-Cu scaffolds presented excellent antimicrobial activity against Escherichia coli and Staphylococcus aureus, and the cell viability assay indicated that there was no cytotoxic effect of 316L-Cu scaffolds on rat marrow mesenchymal stem cells. As such, these have the potential to reduce implant-associated infections. The Cu was also found to homogeneously distribute within the microstructure by scanning electronic microcopy. The addition of Cu would not significantly affect its strength and stiffness compared to 316L scaffold, and the stiffness of all the scaffolds (3-20GPa) is similar to that of bone and much less than that of bulk stainless steel. Consequently, fabrication of such low stiffness porous structures, especially coupled with the addition of antimicrobial Cu, may provide a new direction for medical stainless steels.

  15. In vivo efficacy studies of layer-by-layer nano-matrix bearing kaempferol for the conditions of osteoporosis: a study in ovariectomized rat model.

    Science.gov (United States)

    Kumar, Avinash; Gupta, Girish K; Khedgikar, Vikram; Gautam, Jyoti; Kushwaha, Priyanka; Changkija, Bendangla; Nagar, Geet K; Gupta, Varsha; Verma, Ashwni; Dwivedi, Anil Kumar; Chattopadhyay, Naibedya; Mishra, Prabhat Ranjan; Trivedi, Ritu

    2012-11-01

    A prototype formulation based on layer-by-layer (LbL) nano-matrix was developed to increase bioavailability of kaempferol with improved retention in bone marrow to achieve enhanced bone formation. The layer-by-layer nano-matrix was prepared by sequential adsorption of biocompatible polyelectrolytes over the preformed kaempferol-loaded CaCO(3) template. The system was pharmaceutically characterized and evaluated for osteogenic activity in ovariectomized (OVx) rats. Data have been compared to the standard osteogenic agent parathyroid hormone (PTH). Single oral dose of kaempferol loaded LbL nano-matrix formulation increased bioavailability significantly compared to unformulated kaempferol. Three months of Formulated kaempferol administration to osteopenic rats increased plasma and bone marrow Kaempferol levels by 2.8- and 1.75-fold, respectively, compared to free Kaempferol. Formulated Kaempferol increased bone marrow osteoprogenitor cells, osteogenic genes in femur, bone formation rate, and improved trabecular micro-architecture. Withdrawal of Formulated kaempferol-in OVx rats resulted in the maintenance of bone micro-architecture up to 30days, whereas micro-architectural deterioration was readily observed in OVx rats treated with unformulated kaempferol-within 15days of withdrawal. The developed novel formulation has enhanced anabolic effect in osteopenic rats through increased stimulatory effect in osteoblasts. Treatment post-withdrawal sustenance of formulated kaempferol could become a strategy to enhance bioavailability of flavanoids.

  16. Using gait analysis to assess weight bearing in rats with Freund׳s complete adjuvant-induced monoarthritis to improve predictivity: Interfering with the cyclooxygenase and nerve growth factor pathways.

    Science.gov (United States)

    Ängeby Möller, Kristina; Berge, Odd-Geir; Finn, Anja; Stenfors, Carina; Svensson, Camilla I

    2015-06-01

    Lack of predictive power for drug effects has been a major criticism against animal pain models. It is therefore important to define the utility and limitations of different models. The aim of this study was to extend previous work on gait analysis as a tool to investigate pharmacological effects in monoarthritic rats, specifically to test the hypothesis that monoarthritis induced by Freund׳s complete adjuvant (FCA) provides a better estimate of overall analgesic efficacy of established, and novel, clinically effective and ineffective therapeutic approaches. Male rats injected intra-articularly into one ankle joint with FCA (1.0mg/ml) were treated with the monoclonal antibody to nerve growth factor (NGF), MEDI-578, the inhibitors of tropomyosin receptor kinases A, B and C (pan-Trk) AZ6623 or AZ7092, the transient receptor potential vanilloid 1 (TRPV1) inhibitor AZD1386, or the cyclooxygenase (COX) inhibitors naproxen, ibuprofen, valdecoxib or rofecoxib. Effects on weight bearing during locomotion were tested using video capture of print images. The apparent efficacy in this model was Trk inhibitors≥anti-NGF antibody>COX inhibitors. The TRPV1 inhibitor was ineffective. Together with previous data, the results support using gait-related parameters in the monoarthritis model. FCA as induction agent seems to provide a good overall prediction of analgesic efficacy in disorders with inflammatory joint pain.

  17. Comparison of the Analgesic Effect of Diclofenac Sodium-Eudragit® RS100 Solid Dispersion and Nanoparticles Using Formalin Test in the Rats

    Science.gov (United States)

    Adibkia, Khosro; Mohajjel Nayebi, Alireza; Barzegar-Jalali, Mohammad; Hosseinzadeh, Siavash; Ghanbarzadeh, Saeed; Shiva, Afshin

    2015-01-01

    Purpose: In this study the intensity and duration of analgesic effect of diclofenac Na - Eudragit® RS100 solid dispersion and nanoparticles were evaluated by using formalin test in the rats. Methods: The animals received different formulations of diclofenac Na and subsequently 50 μl of formalin solution (2.5%) was injected subcutaneously in the right paws after 1 h, 2 h and 3 h. The paw licking behavior was then evaluated in two phases. A dose of 20 mg/kg of pure diclofenac Na powder was determined as effective dose. Results: In the first phase, in term of reduced paw licking time, no significant differences were found in any of the groups compared to the control group. However, in the second phase, the animals which received pure drug powder and the physical mixture of diclofenac Na with Eudragit® RS100 showed significant differences at the first and second hours. In the animals received the nanoparticles and solid dispersion, significant differences were observed in the third hour compared to the control group. Conclusion: The analgesic effect of diclofenac Na could be improved by formulating its nanoparticles and solid dispersion with Eudragit® RS100. However, the nanoparticles revealed significantly higher analgesic effect than solid dispersion. PMID:25789222

  18. Comparison of the Analgesic Effect of Diclofenac Sodium-Eudragit® RS100 Solid Dispersion and Nanoparticles Using Formalin Test in the Rats

    Directory of Open Access Journals (Sweden)

    Khosro Adibkia

    2015-03-01

    Full Text Available Purpose: In this study the intensity and duration of analgesic effect of diclofenac Na - Eudragit® RS100 solid dispersion and nanoparticles were evaluated by using formalin test in the rats. Methods: The animals received different formulations of diclofenac Na and subsequently 50 μl of formalin solution (2.5% was injected subcutaneously in the right paws after 1 h, 2 h and 3 h. The paw licking behavior was then evaluated in two phases. A dose of 20 mg/kg of pure diclofenac Na powder was determined as effective dose. Results: In the first phase, in term of reduced paw licking time, no significant differences were found in any of the groups compared to the control group. However, in the second phase, the animals which received pure drug powder and the physical mixture of diclofenac Na with Eudragit® RS100 showed significant differences at the first and second hours. In the animals received the nanoparticles and solid dispersion, significant differences were observed in the third hour compared to the control group. Conclusion: The analgesic effect of diclofenac Na could be improved by formulating its nanoparticles and solid dispersion with Eudragit® RS100. However, the nanoparticles revealed significantly higher analgesic effect than solid dispersion.

  19. Axial Halbach Magnetic Bearings

    Science.gov (United States)

    Eichenberg, Dennis J.; Gallo, Christopher A.; Thompson, William K.

    2008-01-01

    Axial Halbach magnetic bearings have been investigated as part of an effort to develop increasingly reliable noncontact bearings for future high-speed rotary machines that may be used in such applications as aircraft, industrial, and land-vehicle power systems and in some medical and scientific instrumentation systems. Axial Halbach magnetic bearings are passive in the sense that unlike most other magnetic bearings that have been developed in recent years, they effect stable magnetic levitation without need for complex active control.

  20. On-line surveillance of lubricants in bearings by means of surface acoustic waves.

    Science.gov (United States)

    Lindner, Gerhard; Schmitt, Martin; Schubert, Josephine; Krempel, Sandro; Faustmann, Hendrik

    2010-01-01

    The acoustic wave propagation in bearings filled with lubricants and driven by pulsed excitation of surface acoustic waves has been investigated with respect to the presence and the distribution of different lubricants. Experimental setups, which are based on the mode conversion between surface acoustic waves and compression waves at the interface between a solid substrate of the bearing and a lubricant are described. The results of preliminary measurements at linear friction bearings, rotation ball bearings and axial cylinder roller bearings are presented.

  1. Determination of eleutheroside E and eleutheroside B in rat plasma and tissue by high-performance liquid chromatography using solid-phase extraction and photodiode array detection.

    Science.gov (United States)

    Feng, Shi lan; Hu, Fang di; Zhao, Jian Xiong; Liu, Xi; Li, Y'un

    2006-04-01

    A HPLC method with photodiode array detection (PDA) was developed for the determination and a pharmacokinetic study of eleutheroside E (ELU E) and eleutheroside B (ELU B) in rat plasma and tissue following an eleutherococcus injection. The analysis was performed on a Kromasil C18 column, using water-acetonitrile as the gradient mobile phase and 0.8 mL/min flow rate. Detection wavelengths of ELU E and ELU B were 220 and 206 nm, respectively. Protein from the biological sample was deposited using acetonitrile. ELU E and ELU B were extracted from the biological samples using acetonitrile, separated by solid-phase extraction, and eluted from the cartridge using 60% methanol. The extraction recovery of ELU E and ELU B was 91.2 and 88.8%, respectively. The limit of detection was 37.6 ng/mL for ELU E and 37.0 ng/mL for ELU B (S/N = 3) in plasma. Blood drug level-time cuvers of ELU E and ELU B in Wister rats following administration of an eleutherococcus injection into femoral vein were shown to fit a three-compartment model. The half-life (t1/2) was 4.662 h for ELU E and 2.494 h for ELU B. Following administration of a single eleutherococcus injection, the concentration of ELU E and ELU B in the tissue was Cliver > Ckidney > Cspleen > Cheart and Ckidney > Cliver > Cheart. We believe the method described in the present paper is accurate and reliable and can be used for pharmacokinetic studies of ELU E and ELU B in rats. In addition, the method for sample preparation, using solid phase extraction, is precise, simple and rapid.

  2. Cryogenic Hybrid Magnetic Bearing

    Science.gov (United States)

    Meeks, Crawford R.; Dirusso, Eliseo; Brown, Gerald V.

    1994-01-01

    Cryogenic hybrid magnetic bearing is example of class of magnetic bearings in which permanent magnets and electromagnets used to suspend shafts. Electromagnets provide active control of position of shaft. Bearing operates at temperatures from -320 degrees F (-196 degrees C) to 650 degrees F (343 degrees C); designed for possible use in rocket-engine turbopumps, where effects of cryogenic environment and fluid severely limit lubrication of conventional ball bearings. This and similar bearings also suitable for terrestrial rotating machinery; for example, gas-turbine engines, high-vacuum pumps, canned pumps, precise gimbals that suspend sensors, and pumps that handle corrosive or gritty fluids.

  3. TOPICAL REVIEW: Superconducting bearings

    Science.gov (United States)

    Hull, John R.

    2000-02-01

    The physics and technology of superconducting bearings is reviewed. Particular attention is given to the use of high-temperature superconductors (HTSs) in rotating bearings. The basic phenomenology of levitational forces is presented, followed by a brief discussion of the theoretical models that can be used for conceptual understanding and calculations. The merits of various HTS bearing designs are presented, and the behaviour of HTS bearings in typical situations is discussed. The article concludes with a brief survey of various proposed applications for HTS bearings.

  4. Establishment of a Wistar rat model bearing brain glioma C6 cells and its experimental application%Wistar大鼠C6胶质瘤脑移植模型的应用

    Institute of Scientific and Technical Information of China (English)

    易林华; 傅相平; 李安民; 闫润民

    2011-01-01

    Objective To establish a rat model bearing brain glioma and investigate the optimal conditions for its experimental application. Methods C6 cells were implanted into the unilateral brain hemisphere of 20 Wistar rats. The growth behaviors of the brain tumor and behavioral changes of the rats were observed at different time points after the implantation. Results On day 3 after the implantation, only a slight increase of signal intensity was observed on T2-weighted images. By day 5, the tumor became visible in 15/18 of the rats in at least two sections. By day 11,16/ 18 of the rats showed space-occupying effect in the brain, and by day 14, the tumor occupied over 1/2 of the hemisphere in 14/18 of the rats. By day 20, 14/18 of the rats showed a tumor mass occupying over 2/3 of the hemisphere, and some tumor cells had migrated into the contralateral hemisphere. Conclusion In this model of brain glioma, the optimal time widow for experiment is between 14 and 18 days after the cell implantation. The cell density and viability for implantation and the site of implantation may also affect the experimental time widow.%目的 通过观察C6胶质瘤大鼠脑移植模型,了解该模型的牛物学特点,以帮助实验中有效应用.方法 Wistar大鼠20只,将活性较好的C6胶质瘤细胞微量移植人大鼠大脑半球,观察肿瘤生长特点及行为学改变.结果 肿瘤移植后第3天,TW2即可出现轻微高信号改变.15/18的大鼠在第5天至少能看到2个层面的信号改变.16/18的大鼠在第11天能看见实质性肿瘤.13/18的大鼠第14天生长至半侧大脑的1/2.14/18的大鼠第20大大部分肿瘤达到半侧大脑的2/3,部分生长至对侧半球.结论 实验可能的最佳时间窗在14~18 d.同时,肿瘤移植的初始细胞浓度、细胞活性和移植部位可能也对实验时间窗会有较大影响.

  5. Simple liquid chromatographic method for the rapid and simultaneous determination of propoxur and its major metabolite isopropoxy phenol in rat blood and urine using solid-phase extraction.

    Science.gov (United States)

    Suma, Ramagiri; Sarin, R K; Saiprakash, P K; Ramakrishna, Sistla

    2005-10-01

    This research paper describes the development and validation of an analytical method for the simultaneous determination of propoxur and isopropoxy phenol (IPP, a major metabolite) in both blood and urine of rat using reversed-phase high-performance liquid chromatography (HPLC) employing solid-phase extraction (SPE). Sample purification was performed using a weak cation-exchange cartridge (Isolute CBA). Separation was achieved by HPLC with UV detection at 270 nm. Recoveries of propoxur and IPP from blood and urine by SPE exceeded 85%. The validated calibration range for propoxur is from 0.5 to 100 microg/L and 2 to 100 microg/L for IPP in both rat blood and urine. The limit of quantitation for propoxur in blood and urine is 0.5 and 0.8 pg/L, respectively, and 2.0 and 4.2 microg/L, respectively, for IPP. Validation results on specificity, sensitivity, linearity, precision, accuracy, and stability are shown. The applicability of the method was demonstrated by the analysis of urine and blood from rats that were orally fed propoxur at minimum dose.

  6. Teddy Bear Stories

    DEFF Research Database (Denmark)

    van Leeuwen, Theo; Caldas-Coulthardt, Carmen

    2014-01-01

    This paper presents a semiotic analysis of a key cultural artefact, the teddy bear. After introducing the iconography of the teddy bear, it analyses different kinds of stories to show how teddy bears are endowed with meaning in everyday life: stories from children's books, reminiscenses by adults...... about their childhood teddy bears, and children's accounts of what they do with teddy bears, both written for school and told 'out of school', The chapter sees teddy bears as artefacts that provide a cultural channeling for the child's need of a transitional object and argues that the meanings of teddy...... bears have traditionally centred on interpersonal relations within the nuclear family, but have recently been institutionalized and commercialized....

  7. Passive Magnetic Bearing With Ferrofluid Stabilization

    Science.gov (United States)

    Jansen, Ralph; DiRusso, Eliseo

    1996-01-01

    A new class of magnetic bearings is shown to exist analytically and is demonstrated experimentally. The class of magnetic bearings utilize a ferrofluid/solid magnet interaction to stabilize the axial degree of freedom of a permanent magnet radial bearing. Twenty six permanent magnet bearing designs and twenty two ferrofluid stabilizer designs are evaluated. Two types of radial bearing designs are tested to determine their force and stiffness utilizing two methods. The first method is based on the use of frequency measurements to determine stiffness by utilizing an analytical model. The second method consisted of loading the system and measuring displacement in order to measure stiffness. Two ferrofluid stabilizers are tested and force displacement curves are measured. Two experimental test fixtures are designed and constructed in order to conduct the stiffness testing. Polynomial models of the data are generated and used to design the bearing prototype. The prototype was constructed and tested and shown to be stable. Further testing shows the possibility of using this technology for vibration isolation. The project successfully demonstrated the viability of the passive magnetic bearing with ferrofluid stabilization both experimentally and analytically.

  8. Effects of solid-phase extraction of plasma in measuring gut metabolic hormones in fasted and fed blood of lean and diet-induced obese rats.

    Science.gov (United States)

    Reidelberger, Roger; Haver, Alvin; Anders, Krista; Apenteng, Bettye; Lanio, Craig

    2016-05-01

    Glucagon-like peptide-1 (GLP-1), peptide YY (3-36) [PYY(3-36)], amylin, ghrelin, insulin, and leptin are thought to act as hormonal signals from periphery to brain to control food intake. Here, we determined the effects of solid-phase extraction of plasma in measuring these hormones in blood of lean and diet-induced obese rats. Individual enzyme-linked immunoassays and a multiplex assay were used to measure active GLP-1, total PYY, active amylin, active ghrelin, insulin, leptin, and total GIP in response to (1) addition of known amounts of the peptides to lean and obese plasma, (2) a large meal in lean and obese rats, and (3) intravenous infusions of anorexigenic doses of GLP-1, PYY(3-36), amylin, and leptin in lean rats. Extraction of lean and obese plasma prior to assays produced consistent recoveries across assays for GLP-1, PYY, amylin, ghrelin, and insulin, reflecting losses inherent to the extraction procedure. Plasma extraction prior to assays generally revealed larger meal-induced changes in plasma GLP-1, PYY, amylin, ghrelin, and insulin in lean and obese rats. Plasma extraction and the multiplex assay were used to compare plasma levels of GLP-1, PYY, and amylin after a large meal with plasma levels produced by IV infusions of anorexigenic doses of GLP-1, PYY(3-36), and amylin. Infusions produced dose-dependent increases in plasma peptide levels, which were well above their postprandial levels. These results do not support the hypothesis that postprandial plasma levels of GLP-1, PYY(3-36), and amylin are sufficient to decrease food intake by an endocrine mechanism.

  9. The hemolytic component of cancer anemia: effects of osmotic and metabolic stress on the erythrocytes of rats bearing multifocal inoculations of the Walker 256 tumor

    Directory of Open Access Journals (Sweden)

    Vido A.A.

    2000-01-01

    Full Text Available Cancer anemia is classified as an anemia of chronic diseases, although it is sometimes the first symptom of cancer. Cancer anemia includes a hemolytic component, important in the terminal stage when even transfused cells are rapidly destroyed. The presence of a chronic component and the terminal complications of the illness limit studies of the hemolytic component. A multifocal model of tumor growth was used here to simulate the terminal metastatic dissemination stage (several simultaneous inoculations of Walker 256 cells. The hemolytic component of anemia began 3-4 days after inoculation in 100% of the rats and progressed rapidly thereafter: Hb levels dropped from 14.9 ± 0.02 to 8.7 ± 0.06 from days 7 to 11 (~5 times the physiologically normal rate in rats in the absence of bleeding. The development of anemia was correlated (r2 = 0.86 with the development of other systemic effects such as anorexia. There was a significant decrease in the osmotic fragility of circulating erythrocytes: the NaCl concentration causing 50% lysis was reduced from 4.52 ± 0.06 to 4.10 ± 0.01 (P<0.01 on day 7, indicating a reduction in erythrocyte volume. However, with mild metabolic stress (4-h incubation at 37oC, the erythrocytes showed a greater increase in osmotic fragility than the controls, suggesting marked alteration of erythrocyte homeostasis. These effects may be due to primary plasma membrane alterations (transport and/or permeability and/or may be secondary to metabolic changes. This multifocal model is adequate for studying the hemolytic component of cancer anemia since it is rapid, highly reproducible and causes minimal animal suffering.

  10. Effects of combined selenium and vitamin E administration on DNA in Walker tumor bearing Wistar rat exposed to cytostatic acute treatment.

    Science.gov (United States)

    Mihalache, Daria; Preoteasa, V; Barca, V

    2003-01-01

    Previous studies have showed that organic Se and Vitamin E have a significant protective effect when administered in combination with cytostatics. This paper reports the investigation on effects of mixed administration Orgasel 50 and Vitamin E in Wistar rat with experimentally induced Walker tumor under acute cytostatic treatment, with emphasis on two aspects: a) the influence of antioxidants upon liver unscheduled DNA biosynthesis under cytostatic (Lomustin) acute aggression; and b) the potential improvement of cytostatic effects by antioxidants treatment in tumor. Two lots of animals were used: lot 1 - Orgasel 50 and Vitamin E administered 7 days before the initiation of tumor induction and lot 2 - the antioxidants were concomitantly administered with tumor cell inoculation. The Walker tumor (an epithelial carcinoma) cells were subcutaneously injected (5 x 10(6) cells/0.5 ml in isotonic saline solution); the first tumor nodules appeared in 4 days; the tumor has reached the appropriate dimensions in 12 days. The unscheduled DNA biosynthesis caused by Lomustin in rat liver as well as the replicative DNA biosynthesis taking place in Walker tumor cells were assessed radioisotopically by measuring the uptake of 3H-Thymidine (200 microCi / 100 g.b.w.). Our observations regarding the role of antioxidant treatment suggest: 1) a benefic effect on DNA alkylant-induced lesions, expressed by a decrease in the level of 3H-Thymidine uptake in liver and, 2) an increase of the inhibitory activity of cytostatic on DNA replication biosynthesis in tumor cells, suggested by lower 3H-Thymidine incorporation in tumor cells. The most significant results were showed in both analyzed tissues, when the Orgasel 50 + Vitamin E administration begins at the same time with the tumor cell inoculation. These findings clearly show the organic Se salts and Vitamin E constitute a valuable adjuvant in anticancer medication, increasing the interest for the application of these antioxidants in cancer

  11. Study of pharmacological activity of solid extracts of thlaspi arvense and onobrychis arenaria on a model of benign proctatic hyperplasia of rats

    Directory of Open Access Journals (Sweden)

    Алексей Викторович Андрияненков

    2015-10-01

    Full Text Available The benign prostatic hyperplasia (BPH is the most wide spread urologic pathology of men of "gold" reproductive age, and preventive care and treatment of BPH is an issue of acute importance for urologists and andrologists of the whole world. Research of the last decade let to say about obvious tendency of this disease progression, that is caused by rise of a menhood rate of the elder age groups. The range of medicines for the treatment of prostatic diseases, presented at the world market, is quite various but an issue of universal prostatic protectors search and involving into clinical practice is still a topic one. A special place in treatment of BPH is for phytopreparations because of their low toxicity, high effectiveness, multittop of pharmacodynamics, that allow to run treatment individually, to minimize risk of sequela, to improve the quality of patients life.In the article, results of study of pharmacological activity of solid extracts of Thlaspi arvense and Onobrychis arenaria are presented as of new prospective phytoprostatic protectors.Goal: Pharmacological study of activity of extracts of Thlaspi arvense and Onobrychis arenaria as prostatic protectors on a model of benign sulpiride-induced prostatic hyperplasia of rats.Methods: estimation of pathology development and pharmacological effectiveness of examined preparations was conducted based on clinical, biochemical indicators of blood plasma and prostatic homogenate.Results: the research confucted has shown that the solid extract of Thlaspi arvense in a dosage of 100 mg/ kg and of Onobrychis arenaria in dose of 40 mg/kg can renovate sensivity of prostate cells to androgens, to neutralize processes of membrane distruction, to normalize prooxidant and antioxidant balance of rats.Conclusions: medical intragastrical injection of a solid extract of Thlaspi arvense in a dosage of 100 mg/kg and of Onobrychis arenaria in dose of 40 mg/kg leads to renovation of prooxidant/antioxidant balance

  12. Comparative plasma and tissue distribution of Sun Pharma's generic doxorubicin HCl liposome injection versus Caelyx(®) (doxorubicin HCl liposome injection) in syngeneic fibrosarcoma-bearing BALB/c mice and Sprague-Dawley rats.

    Science.gov (United States)

    Burade, Vinod; Bhowmick, Subhas; Maiti, Kuntal; Zalawadia, Rishit; Jain, Deepak; Rajamannar, Thennati

    2017-05-01

    The liposomal formulation of doxorubicin [doxorubicin (DXR) hydrochloride (HCl) liposome injection, Caelyx(®)] alters the tissue distribution of DXR as compared with nonliposomal DXR, resulting in an improved benefit-risk profile. We conducted studies in murine models to compare the plasma and tissue distribution of a proposed generic DXR HCl liposome injection developed by Sun Pharmaceuticals Industries Limited (SPIL DXR HCl liposome injection) with Caelyx(®). The plasma and tissue distributions of the SPIL and reference DXR HCl liposome injections were compared in syngeneic fibrosarcoma-bearing BALB/c mice and Sprague-Dawley rats. Different batches and different lots of the same batch of the reference product were also compared with each other. The SPIL and reference DXR HCl liposome injections exhibited generally comparable plasma and tissue distribution profiles in both models. While minor differences were observed between the two products in some tissues, different batches and lots of the reference product also showed some differences in the distribution of various analytes in some tissues. The ratios of estimated free to encapsulated DXR for plasma and tissue were generally comparable between the SPIL and reference DXR HCl liposome injections in both models, indicating similar extents of absorption into the tissues and similar rates of drug release from liposomes. The plasma and tissue distribution profiles of the SPIL and reference DXR HCl liposome injections were shown to be generally comparable. Inconsistencies between the products observed in some tissues were thought to be due to biological variation.

  13. Enhanced oral bioavailability of insulin-loaded solid lipid nanoparticles: pharmacokinetic bioavailability of insulin-loaded solid lipid nanoparticles in diabetic rats.

    Science.gov (United States)

    Ansari, Mohammad Javed; Anwer, Md Khalid; Jamil, Shahid; Al-Shdefat, Ramadan; Ali, Bahaa E; Ahmad, Mohammad Muqtader; Ansari, Mohammad Nazam

    2016-07-01

    Insulin is a hormone used in the treatment of diabetes mellitus. Multiple injections of insulin every day may causes pain, allergic reactions at injection site, which lead to low patient compliance. The aim of this work was to develop and evaluate an efficient solid lipid nanoparticle (SLN) carrier for oral delivery of insulin. SLNs were prepared by double emulsion solvent evaporation (w/o/w) technique, employing glyceryltrimyristate (Dynasan 114) as lipid phase and soy lecithin and polyvinyl alcohol as primary and secondary emulsifier, respectively, and evaluated in vitro for particle size, polydispersity index (PDI) and drug entrapment. Among the eight different developed formulae (F1-F8), F7 showed an average particle size (99 nm), PDI (0.021), high entrapment of drug (56.5%). The optimized formulation (F7) was further evaluated by FT-IR, DSC, XRD, in vitro release, permeation, stability, bioavailability and pharmacological studies. Insulin-loaded SLNs showed better protection from gastrointestinal environment as evident from the relative bioavailability, which was enhanced five times as compared to the insulin solution. A significant enhancement of relative bioavailability of insulin was observed, i.e. approximately five times of pure insulin solution when loaded in SLN (8.26% versus 1.7% only).

  14. Additional weight-bearing during exercise is more important than duration of exercise for anabolic stimulus of bone: a study of running exercise in female rats.

    Science.gov (United States)

    van der Wiel, H E; Lips, P; Graafmans, W C; Danielsen, C C; Nauta, J; van Lingen, A; Mosekilde, L

    1995-01-01

    Mechanical loading is necessary for maintenance of skeletal integrity, but the most effective type, intensity, and duration of exercise are not known. In vivo experiments have indicated that the strain generated by the stimulus is more important than the duration of the stimulus. To elucidate this question, we studied 5-month-old female Wistar rats exercised on a motor-driven exercise belt for 17 weeks, 5 days per week (average velocity 20 m/min). Group 1 served as controls, group 2 was trained for 30 min, group 3 was trained for 30 min with a 50-g backpack, and group 4 was trained for 15 min with a 50-g backpack. Total body bone mineral content (BMC), bone mass of the lower extremities (LEBMC), total body lean soft-tissue mass (LSTM), and total body fat-tissue mass (FTM) were measured by dual-energy absorptiometry (DXA) at 0, 6, and 17 weeks. The BMC increased more in group 4 than in controls (15% vs. 8%, p LSTM after 6 weeks was most pronounced in group 3, at 20%, compared with 10% in the control group (p < 0.001).(ABSTRACT TRUNCATED AT 250 WORDS)

  15. The assesment of effectiveness of plasmonic resonance photothermal therapy in tumor-bearing rats after multiple intravenous administration of gold nanorods

    Science.gov (United States)

    Bucharskaya, Alla B.; Maslyakova, Galina N.; Navolokin, Nikita A.; Terentyuk, Georgy S.; Khlebtsov, Boris N.; Khlebtsov, Nikolai G.; Bashkatov, Alexey N.; Genina, Elina A.; Tuchin, V. V.

    2017-03-01

    To assess the effectiveness of plasmonic photothermal therapy (PPT) multiple intravenous strategy of gold nanorods (GNRs) administration was used before laser exposure. The model of alveolar liver cancer PC-1 was used in male outbred albino rats, which were intravenously administrated by single and multiple injections of GNRs and then were treated by PPT. The gold dosage was 400 μg (single injection group), 800 μg (double injection group), 1200 μg (triple injection group), and absorption maximum of gold nanorods suspension was at the wavelength of 808 nm. 24 hours after last injection the tumors were irradiated by the 808-nm diode laser during 15 min at power density 2.3 W/cm2. Temperature control of the tumor heating was provided by IR imager. 24 hours after the PPT the half of animals from each group was withdrawn from the experiments and the sampling tumor tissue for morphological study was performed. In survived animals the growth of tumors was evaluated during 21 days after the PPT. The antitumor effects of PPT after triple intravenous injection were comparable with those obtained at direct intratumoral administration of similar total dose of GNRs. The effectiveness of PPT depended on gold accumulation in tumor, probably, due to sufficient vascularization of tumor tissue.

  16. EcoBears

    DEFF Research Database (Denmark)

    Nielsen, Nick; Pedersen, Sandra Bleuenn; Sørensen, Jens Ager

    2015-01-01

    In this paper, we introduce the EcoBears concept that aims to augment household appliances with functional and aesthetic features to promote their "use'' and "longevity of use'' to prevent their disposal. The EcoBears also aim to support the communication of environmental issues in the home setting....... We present our initial design and implementation of the EcoBears that consist of two bear modules (a mother and her cub). We also present our preliminary concept validations and lessons learned to be considered for future directions....

  17. Magnetic solid-phase extraction and determination of puerarin in rat plasma using C(18)-functionalized magnetic silica nanoparticles by high performance liquid chromatography.

    Science.gov (United States)

    Wang, Qi; Huang, Lijie; Yu, Panfeng; Wang, Jianchang; Shen, Shun

    2013-01-01

    In the paper, we presented a magnetic solid-phase extraction (MSPE) method based on C(18)-functionalized magnetic silica nanoparticles for the analysis of puerarin in rat plasma. The approach involves two steps including synthesis of magnetic solid-phase sorbents and bioanalysis. The synthesized magnetic silica microspheres modified with chloro(dimethyl)octylsilane (namely Fe(3)O(4)@SiO(2)-C(18)) can provide an efficient way for the extraction of puerarin through C(18) hydrophobic interaction. The puerarin could be easily enriched using milligram-level Fe(3)O(4)@SiO(2)-C(18) sorbents with vibration for 10min. By means of a magnet, puerarin adsorbed with Fe(3)O(4)@SiO(2)-C(18) sorbents was easily isolated from the matrix, and desorbed with CAN. No carryover was observed, and the sorbents could be recycled in our study. The method recoveries were obtained from 85.2% to 92.3%. Limits of quantification and limits of detection of 0.1μgmL(-1) and 0.05μgmL(-1), respectively were achieved. The precision was from 8.1 to 13.7% for intra-day measurement, and from 9.4 to 15.2% for inter-day variation. The accuracy ranged from 94.7 to 106.3% for intra-day measurement, and from 93.3 to 107.8% for inter-day measurement. The MSPE method was applied for analysis of puerarin in rat plasma samples. The results indicated that it was convenient and efficient for the determination of puerarin in biosamples.

  18. Effects of simultaneous dietary fish oil ingestion and sulfur amino acid supplementation on the lipid metabolism in hepatoma-bearing rats with hyperlipidemia.

    Science.gov (United States)

    Kawasaki, Masashi; Miura, Yutaka; Funabiki, Ryuhei; Yagasaki, Kazumi

    2010-01-01

    The effects of simultaneous dietary fish oil ingestion and sulfur amino acid (L-methionine and L-cystine) supplementation on serum lipid concentrations and various parameters related to the lipid metabolism were studied in Donryu rats subcutaneously implanted with an ascites hepatoma cell line, AH109A. A diet containing 10% fish oil was found to reduce serum triglyceride, total cholesterol, (very-low-density lipoprotein plus low-density lipoprotein)-cholesterol, phospholipid and nonesterified fatty acid (NEFA) concentrations in these animals, and dietary supplementation of 1.2% L-methionine and L-cystine also suppressed these serum lipid concentrations. Hepatic fatty acid synthesis and the availability of serum NEFA were decreased, and epididymal adipose tissue lipoprotein lipase (LPL) activity was elevated by dietary fish oil, while LPL activity in various tissues and hepatic fatty acid oxidation were increased by dietary sulfur amino acids, resulting in a reduction in the serum triglyceride concentration by dietary fish oil and sulfur amino acids, respectively. Dietary fish oil suppressed the hepatoma-induced increase in cholesterogenesis in the host liver, and dietary methionine and cystine enhanced bile acid excretion into feces, which were the causes of the hypocholesterolemic effect. In these serum lipid concentrations, there were significant effects of fish oil ingestion and sulfur amino acid supplementation, but no significant interaction between these two factors was seen. These results indicate that dietary fish oil and sulfur amino acid, L-methionine and L-cystine, have hypolipidemic effects in cancer-related hyperlipidemia, and that the effects of these two factors on the decrease in these serum lipid concentrations are additive; these two factors may affect the lipid metabolism via different pathways and mechanisms.

  19. Evaluation of Epirubicin in Thermogelling and Bioadhesive Liquid and Solid Suppository Formulations for Rectal Administration

    Directory of Open Access Journals (Sweden)

    Yu-Li Lo

    2013-12-01

    Full Text Available Temperature sensitive Pluronic (Plu and pH-sensitive polyacrylic acid (PAA were successfully mixed in different ratios to form in situ gelling formulations for colon cancer therapy. The major formulations were prepared as the liquid and solid suppository dosage forms. Epirubicin (Epi was chosen as a model anticancer drug. In vitro characterization and in vivo pharmacokinetics and therapeutic efficacy of Epi in six Plu/PAA formulations were evaluated. Our in vitro data indicate that Epi in Plu 14%/PAA 0.75% of both solid and liquid suppositories possess significant cytotoxicity, strong bioadhesive force, long-term appropriate suppository base, sustained release, and high accumulation of Epi in rat rectums. These solid and liquid suppositories were retained in the upper rectum of Sprague-Dawley (SD rats for at least 12 h. An in vivo pharmacokinetic study using SD rats showed that after rectal administration of solid and liquid suppositories, Epi had greater area under the curve and higher relative bioavailability than in a rectal solution. These solid and liquid suppositories exhibited remarkable inhibition on the tumor growth of CT26 bearing Balb/c mice in vivo. Our findings suggest that in situ thermogelling and mucoadhesive suppositories demonstrate a great potential as colon anticancer delivery systems for protracted release of chemotherapeutic agents.

  20. Evaluation of Epirubicin in Thermogelling and Bioadhesive Liquid and Solid Suppository Formulations for Rectal Administration

    Science.gov (United States)

    Lo, Yu-Li; Lin, Yijun; Lin, Hong-Ru

    2014-01-01

    Temperature sensitive Pluronic (Plu) and pH-sensitive polyacrylic acid (PAA) were successfully mixed in different ratios to form in situ gelling formulations for colon cancer therapy. The major formulations were prepared as the liquid and solid suppository dosage forms. Epirubicin (Epi) was chosen as a model anticancer drug. In vitro characterization and in vivo pharmacokinetics and therapeutic efficacy of Epi in six Plu/PAA formulations were evaluated. Our in vitro data indicate that Epi in Plu 14%/PAA 0.75% of both solid and liquid suppositories possess significant cytotoxicity, strong bioadhesive force, long-term appropriate suppository base, sustained release, and high accumulation of Epi in rat rectums. These solid and liquid suppositories were retained in the upper rectum of Sprague-Dawley (SD) rats for at least 12 h. An in vivo pharmacokinetic study using SD rats showed that after rectal administration of solid and liquid suppositories, Epi had greater area under the curve and higher relative bioavailability than in a rectal solution. These solid and liquid suppositories exhibited remarkable inhibition on the tumor growth of CT26 bearing Balb/c mice in vivo. Our findings suggest that in situ thermogelling and mucoadhesive suppositories demonstrate a great potential as colon anticancer delivery systems for protracted release of chemotherapeutic agents. PMID:24384838

  1. In vivo solid-phase microextraction liquid chromatography-tandem mass spectrometry for monitoring blood eicosanoids time profile after lipopolysaccharide-induced inflammation in Sprague-Dawley rats.

    Science.gov (United States)

    Bessonneau, Vincent; Zhan, Yanwei; De Lannoy, Inés A M; Saldivia, Victor; Pawliszyn, Janusz

    2015-12-11

    A fast and non-lethal in vivo solid-phase microextraction (SPME) sampling method for rat blood coupled to liquid chromatography and tandem mass spectrometry (LC-MS/MS) was developed for monitoring rapid changes in concentrations of eicosanoids - lipid mediators involved in the development of inflammatory conditions - using diffusion-based calibration. Sampling rates of target eicosanoids were pre-determined under laboratory conditions with a precision of ≤10%, and directly used for quantification of analyte concentrations in blood after lipopolysaccharide-induced inflammation in Sprague-Dawley rats. Results showed significant changes in unbound plasma concentrations of arachidonic acid (AA) and 12-hydroxyeicosatetraenoic acid (12-HETE) in response to the treatment. Next, performance of the proposed method was compared with protein precipitation (PP) of plasma, a conventional sample preparation technique. Finally, percentages of plasma protein binding (PPB) of specific eicosanoids were determined. PPB of target eicosanoids was in agreement with literature values, ranging from 99.3 to 99.9% for 12-HETE and DHA, respectively. We envision that the proposed method is a particularly suitable alternative to lethal sampling and current methods based on sample depletion in animal studies for accurate monitoring of rapid changes in blood concentrations of small molecules.

  2. Damper bearing rotordynamics

    Science.gov (United States)

    Elrod, David A.

    1990-01-01

    High side loads reduce the life of the Space Shuttle Main Engine (SSME) High Pressure Oxygen Turbopump (HPOTP) bearings. High stiffness damper seals were recommended to reduce the loads on the pump and turbine end bearings in the HPOTP. The seals designed for use on the pump end are expected to adequately reduce the bearing loads; the predicted performance of the planned turbine end seal is marginal. An alternative to the suggested turbine end seal design is a damper bearing with radial holes from the pressurized center of the turbopump rotor, feeding a smooth land region between two rough-stator/smooth-rotor annular seals. An analysis was prepared to predict the leakage and rotor dynamic coefficients (stiffness, damping, and added mass) of the damper bearing. Governing equations of the seal analysis modified to model the damper bearing; differences between the upstream conditions of the damper bearing and a typical annular seal; prediction of the damper bearing analysis; and assumptions of the analysis which require further investigation are described.

  3. The salmon bears: giants of the great bear rainforest

    National Research Council Canada - National Science Library

    McAllister, I; Read, N

    2010-01-01

    The Salmon Bears explores the delicate balance that exists between the grizzly, black and spirit bears of the Great Bear Rainforest and their natural environment on the central coast of British Columbia...

  4. Touchdown Ball-Bearing System for Magnetic Bearings

    Science.gov (United States)

    Kingsbury, Edward P.; Price, Robert; Gelotte, Erik; Singer, Herbert B.

    2003-01-01

    The torque-limited touchdown bearing system (TLTBS) is a backup mechanical-bearing system for a high-speed rotary machine in which the rotor shaft is supported by magnetic bearings in steady-state normal operation. The TLTBS provides ball-bearing support to augment or supplant the magnetic bearings during startup, shutdown, or failure of the magnetic bearings. The TLTBS also provides support in the presence of conditions (in particular, rotational acceleration) that make it difficult or impossible to control the magnetic bearings or in which the magnetic bearings are not strong enough (e.g., when the side load against the rotor exceeds the available lateral magnetic force).

  5. Ultra-precision bearings

    CERN Document Server

    Wardle, F

    2015-01-01

    Ultra-precision bearings can achieve extreme accuracy of rotation, making them ideal for use in numerous applications across a variety of fields, including hard disk drives, roundness measuring machines and optical scanners. Ultraprecision Bearings provides a detailed review of the different types of bearing and their properties, as well as an analysis of the factors that influence motion error, stiffness and damping. Following an introduction to basic principles of motion error, each chapter of the book is then devoted to the basic principles and properties of a specific type of bearin

  6. Solid Lubricants for Oil-Free Turbomachinery

    Science.gov (United States)

    DellaCorte, Christopher

    2005-01-01

    Recent breakthroughs in gas foil bearing solid lubricants and computer based modeling has enabled the development of revolulionary Oil-Free turbomachinery systems. These innovative new and solid lubricants at low speeds (start-up and shut down). Foil bearings are hydrodynamic, self acting fluid film bearings made from thin, flexible sheet metal foils. These thin foils trap a hydrodynamic lubricating air film between their surfaces and moving shaft surface. For low temperature applications, like ainrafl air cycle machines (ACM's), polymer coatings provide important solid lubrication during start-up and shut down prior to the development of the lubricating fluid film. The successful development of Oil-Free gas turbine engines requires bearings which can operate at much higher temperatures (greater than 300 C). To address this extreme solid lubrication need, NASA has invented a new family of compostie solid lubricant coatings, NASA PS300.

  7. Low-Wear Ball-Bearing Separator

    Science.gov (United States)

    Hawkinson, Elden L.

    1991-01-01

    Proposed ball-bearing separator for use in cryogenic pump stronger and more resistant to wear. Consists of molded plastic-and-metal composite ring imbued with solid lubricant and containing embedded metal ring. Obtains combination of strength and lubricity. Before molding and machining, ring includes tooling portion for handling and indexing. Molded composite blend of PTFE and fluorinated ethylene/propylene (FEP) filled with brass and bronze powder and molybdenum disulfide powder.

  8. Comparative pharmacokinetics and bioavailability studies of quercetin, kaempferol and isorhamnetin after oral administration of Ginkgo biloba extracts, Ginkgo biloba extract phospholipid complexes and Ginkgo biloba extract solid dispersions in rats.

    Science.gov (United States)

    Chen, Zhi-peng; Sun, Jun; Chen, Hong-xuan; Xiao, Yan-yu; Liu, Dan; Chen, Jun; Cai, Hao; Cai, Bao-chang

    2010-12-01

    The aim of this study was to improve the oral bioavailability of Ginkgo biloba extract (GBE) through preparing G. biloba extract phospholipid complexes (GBP) and G. biloba extract solid dispersions (GBS). Firstly we prepared the GBP and GBS and studied their physicochemical properties by differential scanning calorimetry (DSC), powder X-ray diffraction (XRD) and dissolution. Then we studied the pharmacokinetic characteristics and bioavailability in rats. The results showed that the bioavailability of quercetin, kaempferol and isorhamnetin in rats was increased remarkably after oral administration of GBP and GBS comparing with GBE. The bioavailabilities of GBP increased more than that of GBS.

  9. Rats

    Directory of Open Access Journals (Sweden)

    Alexey Kondrashov

    2012-01-01

    Full Text Available We aimed to perform a chemical analysis of both Alibernet red wine and an alcohol-free Alibernet red wine extract (AWE and to investigate the effects of AWE on nitric oxide and reactive oxygen species production as well as blood pressure development in normotensive Wistar Kyoto (WKY and spontaneously hypertensive rats (SHRs. Total antioxidant capacity together with total phenolic and selected mineral content was measured in wine and AWE. Young 6-week-old male WKY and SHR were treated with AWE (24,2 mg/kg/day for 3 weeks. Total NOS and SOD activities, eNOS and SOD1 protein expressions, and superoxide production were determined in the tissues. Both antioxidant capacity and phenolic content were significantly higher in AWE compared to wine. The AWE increased NOS activity in the left ventricle, aorta, and kidney of SHR, while it did not change NOS activity in WKY rats. Similarly, increased SOD activity in the plasma and left ventricle was observed in SHR only. There were no changes in eNOS and SOD1 expressions. In conclusion, phenolics and minerals included in AWE may contribute directly to increased NOS and SOD activities of SHR. Nevertheless, 3 weeks of AWE treatment failed to affect blood pressure of SHR.

  10. Gear bearing drive

    Science.gov (United States)

    Weinberg, Brian (Inventor); Mavroidis, Constantinos (Inventor); Vranish, John M. (Inventor)

    2011-01-01

    A gear bearing drive provides a compact mechanism that operates as an actuator providing torque and as a joint providing support. The drive includes a gear arrangement integrating an external rotor DC motor within a sun gear. Locking surfaces maintain the components of the drive in alignment and provide support for axial loads and moments. The gear bearing drive has a variety of applications, including as a joint in robotic arms and prosthetic limbs.

  11. Rolling bearing analysis

    CERN Document Server

    Harris, Tedric A

    2001-01-01

    One of the most well-known experts in the field brings cutting-edge research to practitioners in the new edition of this important reference. Covers the improved mathematical calculations for rolling bearing endurance developed by the American Society of Mechanical Engineers and the Society of Lubrication and Tribology Engineers. Updated with new material on Condition-Based Maintenance, new testing methods, and new bearing materials.

  12. My Little Teddy Bear

    Institute of Scientific and Technical Information of China (English)

    钱佳楠

    2005-01-01

    @@ As Valentine's Day came closer,every shop was full of colourful gifts such as cookies in the shape of heart, chocolates,Teddy Bears and so on.When I step into a shop on February 14th,I felt most lonely as I was alone.With mv eves fixed on a lovely Teddy Bear, I wished that someone could send me this stuffed toy.

  13. Long-term pharmacokinetic efficacy and safety of low-dose ritonavir as a booster and atazanavir pharmaceutical formulation based on solid dispersion system in rats.

    Science.gov (United States)

    Fukushima, Keizo; Haraya, Kenta; Terasaka, Shuichi; Ito, Yukako; Sugioka, Nobuyuki; Takada, Kanji

    2008-06-01

    Atazanavir (ATV) is clinically coadministered with low-dose ritonavir (RTV), which boosts the oral bioavailability (BA) of ATV by inhibiting cytochrome P450 (CYP) 3A, and P-glycoprotein (Pgp) via the same metabolic pathway; however, it is well known that in the chronic phase, the inhibition effect of RTV on Pgp and CYP3A becomes an induction effect. In this study, we investigated the long-term efficacy and safety of RTV-boosted ATV in rats with a clinical relevant dosage of ATV and RTV, 7 mg/kg and 2 mg/kg, respectively, and drew a direct comparison with RTV-boosted ATV and the previously reported ATV pharmaceutical formulation based on a solid dispersion system (ATV-SLS SD+G). Rats received RTV-boosted ATV or ATV-SLS SD+G for 14 d in the pharmacokinetic study. In addition, after 14-d repeated administration of each formulation, cyclosporine A (CyA) was administered to rats and Western blot analysis of Pgp and CYP3A was performed to investigate the impact on pharmacokinetic interaction of each ATV formulation. After repeated administration of both formulations, there was no significant difference between ATV pharmacokinetic parameters on day 1 and 14; therefore, it was considered that the long-term efficacy of both ATV formulations was maintained. However, after treatment with RTV-boosted ATV, the Cmax and AUC0-infinity of the following CyA significantly decreased to 49% and 47% in comparison to the control, respectively, and the Pgp expression in the small intestine by Western blot analysis was approximately 2-fold higher than the control, whereas after treatment with ATV pharmaceutical formulation, neither significant alteration of CyA nor notable change in the expression of intestinal Pgp and hepatic CYP3A was observed. Therefore, it was considered that the BA of CyA after treatment with RTV-boosted ATV would decrease by the induction effect of RTV in chronic phase as described above. The results of this study revealed that the chronic use of low-dose RTV as a

  14. Magnetic Bearing Consumes Low Power

    Science.gov (United States)

    Studer, P. A.

    1982-01-01

    Energy-efficient linear magnetic bearing maintains a precise small separation between its moving and stationary parts. Originally designed for cryogenic compressors on spacecraft, proposed magnetic bearing offers an alternative to roller or gas bearing in linear motion system. Linear noncontacting bearing operates in environments where lubricants cannot be used.

  15. Tribology of alternative bearings.

    Science.gov (United States)

    Fisher, John; Jin, Zhongmin; Tipper, Joanne; Stone, Martin; Ingham, Eileen

    2006-12-01

    The tribological performance and biological activity of the wear debris produced has been compared for highly cross-linked polyethylene, ceramic-on-ceramic, metal-on-metal, and modified metal bearings in a series of in vitro studies from a single laboratory. The functional lifetime demand of young and active patients is 10-fold greater than the estimated functional lifetime of traditional polyethylene. There is considerable interest in using larger diameter heads in these high demand patients. Highly cross-linked polyethylene show a four-fold reduction in functional biological activity. Ceramic-on-ceramic bearings have the lowest wear rates and least reactive wear debris. The functional biological activity is 20-fold lower than with highly cross-linked polyethylene. Hence, ceramic-on-ceramic bearings address the tribological lifetime demand of highly active patients. Metal-on-metal bearings have substantially lower wear rates than highly cross-linked polyethylene and wear decreases with head diameter. Bedding in wear is also lower with reduced radial clearance. Differential hardness ceramic-on-metal bearings and the application of ceramic-like coatings reduce metal wear and ion levels.

  16. HPLC method with solid-phase extraction for determination of (R)- and (S)-ketoprofen in plasma without caffeine interference: application to pharmacokinetic studies in rats.

    Science.gov (United States)

    López-Muñoz, Francisco Javier; Vara Gama, Nancy; Soria-Arteche, Olivia; Hurtado y de la Peña, Marcela; Domínguez-Ramírez, Adriana Miriam; Medina López, José Raúl

    2014-01-01

    A fast and reproducible high-performance liquid chromatography method has been developed for the determination of (R)- and (S)-ketoprofen. Ketoprofen enantiomers were determined in plasma samples (50 µL), after solid-phase extraction, using diclofenac as internal standard. Analyses were performed on a (S, S)-Whelk-O 1 stainless steel column (5 µm, 250 × 4.6 mm) using hexane-ethanol-acetic acid (93:7:0.5, v/v/v) as the mobile phase and detection at 254 nm. The method was selective for ketoprofen enantiomers in the presence of caffeine and endogenous plasma compounds. Standard curves were linear (R(2) > 0.999) over the concentration range of 0.25-12.50 and 0.25 µg/mL was taken as the limit of quantification. The intra- and interday precision (relative standard deviation) values were 0.05). The validated method was successfully applied in determination of (S)-ketoprofen in Wistar rats after oral administration of 3.2 mg/kg of (S)-ketoprofen alone or 3.2 mg/kg of (S)-ketoprofen + 17.8 mg/kg of caffeine.

  17. Nonlinear Analyses of the Dynamic Properties of Hydrostatic Bearing Systems

    Institute of Scientific and Technical Information of China (English)

    LIU Wei(刘伟); WU Xiujiang(吴秀江); V.A. Prokopenko

    2003-01-01

    Nonlinear analyses of hydrostatic bearing systems are necessary to adequately model the fluid-solid interaction. The dynamic properties of linear and nonlinear analytical models of hydrostatic bearings are compared in this paper. The analyses were based on the determination of the aperiodic border of transient processes with external step loads. The results show that the dynamic properties can be most effectively improved by increasing the hydrostatic bearing crosspiece width and additional pocket volume in a bearing can extend the load range for which the transient process is aperiodic, but an additional restrictor and capacitor (RC) chain must be introduced for increasing damping. The nonlinear analyses can also be used to predict typical design parameters for a hydrostatic bearing.

  18. Adsorptive removal of Methylene blue and Methyl orange from aqueous media by carboxylated diaminoethane sporopollenin: On the usability of an aminocarboxilic acid functionality-bearing solid-stationary phase in column techniques

    Energy Technology Data Exchange (ETDEWEB)

    Ayar, Ahmet [Nigde University, Faculty of Science and Art, Department of Chemistry, 51100 Nigde (Turkey); Gezici, Orhan [Nigde University, Faculty of Science and Art, Department of Chemistry, 51100 Nigde (Turkey) and Selcuk University, Institution of Natural and Applied Sciences, Konya (Turkey)]. E-mail: ogezici@nigde.edu.tr; Kuecuekosmanoglu, Muhittin [Nigde University, Faculty of Science and Art, Department of Chemistry, 51100 Nigde (Turkey)

    2007-07-19

    The adsorption phenomena of Methylene blue (MB) and Methyl orange (MO) on a carboxylated diaminoethane sporopollenin (CDAE-S) solid phase were investigated in a column arrangement by using breakthrough technique. The adsorption phenomena were evaluated using some common adsorption isotherm models and Scatchard plot analysis, and obtained results were interpreted for evaluating the usability of CDAE-S for removal, recovery and preconcentration of the studied dyes both at the laboratory and industrial scales. On the basis of Scatchard plot analysis, the interaction types between the CDAE-S and the studied dyes were criticized in terms of affinity phenomena. Thus, the usability of a biomacromolecule-derived material, CDAE-S, as a cheap, environmentally-friendly and effective solid-stationary phase exhibiting both cation-exchange and anion-exchange characteristics at the same time, is discussed through the present study. Besides, from the obtained results, the protonated CDAE-S, which functionally resembles an amino acid structure, are presented as a two-in-one solid-stationary phase, and its adaptability to common processes performed under column conditions is also drawn in detail.

  19. Radial Halbach Magnetic Bearings

    Science.gov (United States)

    Eichenberg, Dennis J.; Gallo, Christopher A.; Thompson, William K.

    2009-01-01

    Radial Halbach magnetic bearings have been investigated as part of an effort to develop increasingly reliable noncontact bearings for future high-speed rotary machines that may be used in such applications as aircraft, industrial, and land-vehicle power systems and in some medical and scientific instrumentation systems. Radial Halbach magnetic bearings are based on the same principle as that of axial Halbach magnetic bearings, differing in geometry as the names of these two types of bearings suggest. Both radial and axial Halbach magnetic bearings are passive in the sense that unlike most other magnetic bearings that have been developed in recent years, they effect stable magnetic levitation without need for complex active control. Axial Halbach magnetic bearings were described in Axial Halbach Magnetic Bearings (LEW-18066-1), NASA Tech Briefs, Vol. 32, No. 7 (July 2008), page 85. In the remainder of this article, the description of the principle of operation from the cited prior article is recapitulated and updated to incorporate the present radial geometry. In simplest terms, the basic principle of levitation in an axial or radial Halbach magnetic bearing is that of the repulsive electromagnetic force between (1) a moving permanent magnet and (2) an electric current induced in a stationary electrical conductor by the motion of the magnetic field. An axial or radial Halbach bearing includes multiple permanent magnets arranged in a Halbach array ("Halbach array" is defined below) in a rotor and multiple conductors in the form of wire coils in a stator, all arranged so the rotary motion produces an axial or radial repulsion that is sufficient to levitate the rotor. A basic Halbach array (see Figure 1) consists of a row of permanent magnets, each oriented so that its magnetic field is at a right angle to that of the adjacent magnet, and the right-angle turns are sequenced so as to maximize the magnitude of the magnetic flux density on one side of the row while

  20. Partial tooth gear bearings

    Science.gov (United States)

    Vranish, John M. (Inventor)

    2010-01-01

    A partial gear bearing including an upper half, comprising peak partial teeth, and a lower, or bottom, half, comprising valley partial teeth. The upper half also has an integrated roller section between each of the peak partial teeth with a radius equal to the gear pitch radius of the radially outwardly extending peak partial teeth. Conversely, the lower half has an integrated roller section between each of the valley half teeth with a radius also equal to the gear pitch radius of the peak partial teeth. The valley partial teeth extend radially inwardly from its roller section. The peak and valley partial teeth are exactly out of phase with each other, as are the roller sections of the upper and lower halves. Essentially, the end roller bearing of the typical gear bearing has been integrated into the normal gear tooth pattern.

  1. The Little Bear

    Institute of Scientific and Technical Information of China (English)

    林战峰; 乐伟国

    2007-01-01

    @@ 一、故事内容 A little bear has a magic stick.It can make his wishes come true. One day,the little bear is walking in the forest.He sees a bird.It is flying in the sky.It has two beautiful wings."I want two beautiful wings.I wish I can fly like a bird,"he says to the magic stick.Two beautiful wings come out from his back and he can fly like a bird now.He is very happy.

  2. Modular gear bearings

    Science.gov (United States)

    Vranish, John M. (Inventor)

    2009-01-01

    A gearing system using modular gear bearing components. Each component is composed of a core, one or more modules attached to the core and two or more fastening modules rigidly attaching the modules to the core. The modules, which are attached to the core, may consist of gears, rollers or gear bearing components. The core orientation affects the orientation of the modules attached to the core. This is achieved via the keying arrangement of the core and the component modules that attach to the core. Such an arrangement will also facilitate the phase tuning of gear modules with respect to the core and other gear modules attached to the core.

  3. 以连续浸提法研究铜宫内节育器的大鼠致畸敏感期生殖毒性%The reproductive toxicity of rat models implanted with copper-bearing intrauterine device at teratogenic sensitive period by continuous extraction method

    Institute of Scientific and Technical Information of China (English)

    张丹丹; 王溢; 王春仁; 王召旭

    2014-01-01

    BACKGROUND:At present, the copper-bearing intrauterine device, a kind of class III medical devices, is commonly used in China. However, there is no clear conclusion about whether it has impact on the embryo or fetus in some cases, such as unexpected pregnancy during long-term implantation and pregnancy in a short time after removing it. OBJECTIVE: To evaluate the safety of copper-bearing intrauterine device by observing the influence of copper-bearing intrauterine device extracts on pregnant rats and rat fetuses by tail vein injection in the sensitive period of teratogenesis. METHODS: A total of 60 fertilized rats were divided into control group, high dosage group, middle dosage group, and low dosage group. The copper-bearing intrauterine device extracts were prepared by the continuous extraction method. Different concentrations (0.2, 0.1, 0.05 g/mL) of copper-bearing intrauterine device extracts were injected by the tail vein at the 1st day of pregnancy in the latter three groups at a dosage of 0.01 mL/g per day. The control group was given the same amount of normal saline. The injection lasted for 20 days. Then, the pregnant rats were sacrificed to measure body mass, check both sides of the uterus and internal organs, isolate fetal rats, as wel as record the quality of uterus and fetal rats, corpus luteum, implantation numbers, the number of stilbirths, then number of live births and the number of fetal absorption. The fetal rats were determined in the folowing aspects: body mass, body height, tail length, the ossification degree and appearance of the occipital bone, bone and visceral anomalies. RESULTS AND CONCLUSION: The number of births, implantation numbers, the number of live births, the number of corpus luteum, the percentages of live births and stilbirths, the number of resorbed fetuses, and the weight of uterus and fetal rats in the control group showed no difference from those in the other three groups (P > 0.05). No malformation in the internal organs

  4. Hybrid superconductor magnet bearings

    Science.gov (United States)

    Chu, Wei-Kan

    1995-01-01

    Hybrid superconductor magnet bearings (HSMB's) utilize high temperature superconductors (HTS's) together with permanent magnets to form a frictionless interface between relatively rotating parts. They are low mass, stable, and do not incur expenditure of energy during normal operation. There is no direct physical contact between rotor and stator, and hence there is no wear and tear. However, just as any other applications of HTS's, it requires a very cold temperature to function. Whereas this might be perceived as a disadvantage on earth, it is of no great concern in space or on the moon. To astronomers, the moon is an excellent site for an observatory, but the cold and dusty vacuum environment on the moon precludes the use of mechanical bearings on the telescope mounts. Furthermore, drive mechanisms with very fine steps, and hence bearings with extremely low friction are needed to track a star from the moon, because the moon rotates very slowly. All aspects considered, the HSMB is about the only candidate that fits in naturally. Here, we present a design for one such bearing, capable of supporting a telescope that weighs about 3 lbs on Earth.

  5. Silver Bear for Screenplay

    Institute of Scientific and Technical Information of China (English)

    LIU YUNYUN

    2010-01-01

    @@ Chinese director Wang Quan'an won the Silver Bear Prize at the 60th Berlin International Film Festival that lasted during February 11 to 21 tor the best screenplay for his movie Apart Together.The film also opened the festival.

  6. Magnetic bearings for cryogenic turbomachines

    Science.gov (United States)

    Iannello, Victor; Sixsmith, Herbert

    1991-01-01

    Magnetic bearings offer a number of advantages over gas bearings for the support of rotors in cryogenic turboexpanders and compressors. Their performance is relatively independent of the temperature or pressure of the process gas for a large range of conditions. Active magnetic bearing systems that use capacitive sensors have been developed for high speed compressors for use in cryogenic refrigerators. Here, the development of a magnetic bearing system for a miniature ultra high speed compressor is discussed. The magnetic bearing has demonstrated stability at rotational speeds exceeding 250,000 rpm. This paper describes the important features of the magnetic bearing and presents test results demonstrating its performance characteristics.

  7. A Rapid Centrifugation-Assisted Solid-Phase Extraction and Liquid Chromatography Method for Determination of Loureirin A and Loureirin B of Dragon's Blood Capsules in Rat Plasma and Urine After Oral Administration.

    Science.gov (United States)

    Chen, Xiaoshuang; Li, Gaofeng; Ma, Shangfang; Hu, Xujia

    2015-07-01

    A simple, sensitive and rapid centrifugation-assisted solid-phase extraction (SPE) with high-performance liquid chromatography (SPE-HPLC) method was developed for simultaneous determination of the metabolites loureirin A and loureirin B from Dragon's blood in rat plasma and urine. The development of the extraction procedure included optimization of some important extraction phases. After evaluation, the metabolites of Dragon's blood were extracted by centrifugation-assisted SPE and separated by using HPLC. This method showed good linearity (r(2) > 0.99), and in the rat plasma and urine, the recoveries were 93.1 and 95.7% for loureirin A and were 90.1 and 94.2% for loureirin B. The relative standard deviation (RSD) values of intraday and interday precision in rat plasma and urine for loureirin A were <3.84 and 2.01%, respectively. The RSD values of the intraday and interday precision in rat plasma and urine for loureirin B were below 4.25 and 5.83%, respectively. Thus, the established method is suitable for metabolism studies of loureirin A and loureirin B in rat plasma and urine. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  8. Solid-Phase Synthesis and Evaluation of Glycopeptide Fragments from Rat Epididymal Cysteine-Rich Secretory Protein-1 (Crisp-1 ‡

    Directory of Open Access Journals (Sweden)

    George Barany

    2010-09-01

    Full Text Available Three 18-residue peptides with the sequence Glp-Asp-Thr-Thr-Asp-Glu-Trp-Asp-Arg-Asp-Leu-Glu-Asn-Leu-Ser-Thr-Thr-Lys, taken from the N-terminus of the rat epididymal cysteine-rich secretory protein (Crisp-1 that is important in the fertilization process, were prepared by Fmoc solid-phase synthesis using a convergent strategy. These peptides were the parent sequence, plus two possible α-O-linked TN antigen-containing glycopeptides with a Thr(α-D-GalNAc residue in place of either Thr3 or Thr4. During chain assembly, two deletion peptides [des-Asp2 and des-Thr(Ac3-α-D-GalNAc] and one terminated peptide [N-acetylated 14-mer] arose, as did several peptides in which aspartimide formation had occurred at each of the four possible positions in the sequence. These by-products totaled ~20% of the desired product; they were recognized by HPLC and ESI-MS and removed during the intermediate purifications. Final products, obtained in 15-21% overall yields, were characterized by HPLC purities and ESI-MS. Circular dichroism (CD spectra for all three purified peptides, recorded in pure water and in trifluoroethanol-H2O (1:1, revealed that the presence of a sugar moiety does not significantly impact the sampled conformations. Future biological evaluation could elucidate the nature and locus of sugar modification of Crisp-1, and provide insight as to why Crisp-1 protein E binds sperm irreversibly, in contrast to protein D that lacks a sugar near the N-terminus and only binds sperm loosely.

  9. Folic acid functionalized long-circulating co-encapsulated docetaxel and curcumin solid lipid nanoparticles: In vitro evaluation, pharmacokinetic and biodistribution in rats.

    Science.gov (United States)

    Pawar, Harish; Surapaneni, Sunil Kumar; Tikoo, Kulbhushan; Singh, Charan; Burman, Rohani; Gill, Manjinder Singh; Suresh, Sarasija

    2016-05-01

    The purpose of this study was to develop folic acid functionalized long-circulating co-encapsulated docetaxel (DTX) and curcumin (CRM) solid lipid nanoparticles (F-DC-SLN) to improve the pharmacokinetic and efficacy of DTX therapy. F-DC-SLN was prepared by hot melt-emulsification method and optimized by face centered-central composite design (FC-CCD). The SLN was characterized in terms of size and size distribution, drug entrapment efficiency and release profile. The cytotoxicity and cell uptake of the SLN formulations were evaluated in MCF-7 and MDA-MB-231 cell lines. The in vivo pharmacokinetic and biodistribution were studied in Wistar rats. F-DC-SLN exhibited 247.5 ± 3.40 nm particle size with 73.88 ± 1.08% entrapment efficiency and zeta potential of 14.53 ± 3.6 mV. Transmission electron microscopy (TEM) revealed spherical morphology of the SLN. Fluorescence microscopy confirmed the targeting efficacy of F-DC-SLN in MCF-7 cells. F-DC-SLN exhibited a significant increase in area under the curve (594.21 ± 64.34 versus 39.05 ± 7.41 μg/mL h) and mean residence time (31.14 ± 19.94 versus 7.24 ± 4.51 h) in comparison to Taxotere®. In addition, decreased DTX accumulation from F-DC-SLN in the heart and kidney in comparison to Taxotere may avoid to toxicity these vital organs. In conclusion, the F-DC-SLN improved the efficacy and pharmacokinetic profile of DTX exhibiting enhanced potential in optimizing breast cancer therapy.

  10. Magnetic bearings grow more attractive

    Science.gov (United States)

    1993-10-01

    Advances in materials and electronics have enabled designers to devise simpler, smaller magnetic bearings. As a result, costs have dropped, widening the applications for these very-low-friction devices. Avcon (Advanced Controls Technology) has patented a permanent-magnet bias actively controlled bearing. Here high-energy rare earth permanent-magnet materials supply the basic bearing load levitation, while servo-driven electromagnets generate stabilization and centering forces for motion contol. Previous heavy-duty magnetic bearings used electromagnets entirely for suspension and control, which led to large bearings and control systems with higher power requirements. Avcon has developed several types of permanent-magnet bias bearings. The simplest is the radial repulsion bearing. Avcon's homopolar permanent-magnet bias active bearing is the most versatile of the company's designs.

  11. Government Risk-Bearing

    CERN Document Server

    1993-01-01

    The u.s. government bulks large in the nation's financial markets. The huge volume of government-issued and -sponsored debt affects the pricing and volume ofprivate debt and, consequently, resource allocation between competing alternatives. What is often not fully appreciated is the substantial influence the federal government wields overresource allocation through its provisionofcreditandrisk-bearing services to the private economy. Because peopleand firms generally seekto avoid risk, atsomeprice they are willing to pay another party to assume the risk they would otherwise face. Insurance companies are a class of private-sector firms one commonly thinks of as providing these services. As the federal government has expanded its presence in the U.S. economy during this century, it has increasingly developed programs aimed at bearing risks that the private sector either would not take on at any price, or would take on but atapricethoughtto besogreatthatmostpotentialbeneficiarieswouldnotpurchase the coverage. To...

  12. Centrifugally decoupling touchdown bearings

    Science.gov (United States)

    Post, Richard F

    2014-06-24

    Centrifugally decoupling mechanical bearing systems provide thin tensioned metallic ribbons contained in a support structure. This assembly rotates around a stationary shaft being centered at low speeds by the action of the metal ribbons. Tension springs are connected on one end to the ribbons and on the other end to the support structure. The ribbons pass through slots in the inner ring of the support structure. The spring preloading thus insures contact (or near-contact) between the ribbons and the shaft at rotation speeds below the transition speed. Above this speed, however, the centrifugal force on the ribbons produces a tensile force on them that exceeds the spring tensile force so that the ribbons curve outward, effectively decoupling them from mechanical contact with the shaft. They still remain, however, in position to act as a touchdown bearing in case of abnormally high transverse accelerations.

  13. Trend of Self-bearing Motors(Magnetic Bearings)

    OpenAIRE

    上野, 哲; Satoshi, UENO; 立命館大学

    2008-01-01

    This paper introduces a trend of a self-bearing motor that combines the functions of a motor and active magnetic bearing. The self-bearing motor has advantages, such as miniaturization, low cost, and high speed rotation in addition to the advantages of the active magnetic bearing. Various types of self-bearing motors such as a radial type, axial type, permanent magnet type, induction type, and reluctance type, have been proposed. In this paper, technologies and applications of the self-bearin...

  14. Post-magmatic solid solutions of CaCeAl2(Fe3+ 2/3□1/3)[Si2O7][SiO4]O(OH), allanite-(Ce) and REE-bearing epidote in miarolitic pegmatites of Permian Baveno granite (Verbania, central-southern alps, Italy)

    Science.gov (United States)

    Guastoni, Alessandro; Nestola, Fabrizio; Schiazza, Mariangela

    2017-06-01

    CaCeAl2(Fe3+ 2/3□1/3)[Si2O7][SiO4]O(OH), allanite-(Ce) and rare earth element (REE)-bearing epidote occur as globular aggregates and platy prismatic crystals in miarolitic cavities in a niobium, yttrium, fluorine (NYF) granitic pegmatite at Baveno, Verbania, Southern Alps, Italy. These samples were investigated by means of an electron probe micro-analyser (EPMA) and single-crystal X-ray diffraction. Our EPMA results show that the globular aggregates have the highest REE content in the core portion and decreases to REE-bearing epidote towards the rim whereas the prismatic crystals are characterized by marked oscillatory zoning that have the highest REE contents at the rim of the crystal. The unit-cell parameters of "allanites" have an intermediate unit-cell between CaCeAl2(Fe3+ 2/3□1/3)[Si2O7][SiO4]O(OH), allanite-(Ce) and REE-free epidote, because reflect the strong chemical heterogeneity of the samples which form complete solid solutions. Hydrothermal fluids control the activity and precipitation of incompatible elements like high field strength elements (HFSE), Sc and REE by hydrous F-rich fluids below the critical temperature which allow to deposit accessory minerals in the cavities with decreasing temperature. The source of REE and Y are the sheet and REE-silicates like siderophyllite-annite, and gadolinite-(Y) which underwent partial to complete decomposition by the activity of aggressive F-rich hydrothermal fluids.

  15. Leakage-free journal bearings

    Science.gov (United States)

    Pinkus, O.; Etsion, I.

    1976-01-01

    A new concept of a journal bearing is developed which prevents side leakage of the lubricant, thus eliminating the need for sealing and collecting this leakage. The cooling of the bearing is accomplished by the prevailing circumferential flow. An analysis is performed and solutions are given for the bearing geometries and inlet pressures required to achieve the above purpose.

  16. Eccentric exercise training as a countermeasure to non-weight-bearing soleus muscle atrophy

    Science.gov (United States)

    Kirby, Christopher R.; Ryan, Mirelle J.; Booth, Frank W.

    1992-01-01

    This investigation tested whether eccentric resistance training could prevent soleus muscle atrophy during non-weight bearing. Adult female rats were randomly assigned to either weight bearing +/- intramuscular electrodes or non-weight bearing +/- intramuscular electrodes groups. Electrically stimulated maximal eccentric contractions were performed on anesthetized animals at 48-h intervals during the 10-day experiment. Non-weight bearing significantly reduced soleus muscle wet weight (28-31 percent) and noncollagenous protein content (30-31 percent) compared with controls. Eccentric exercise training during non-weight bearing attenuated but did not prevent the loss of soleus muscle wet weight and noncollagenous protein by 77 and 44 percent, respectively. The potential of eccentric exercise training as an effective and highly efficient counter-measure to non-weight-bearing atrophy is demonstrated in the 44 percent attenuation of soleus muscle noncollagenous protein loss by eccentric exercise during only 0.035 percent of the total non-weight-bearing time period.

  17. Eccentric exercise training as a countermeasure to non-weight-bearing soleus muscle atrophy

    Science.gov (United States)

    Kirby, Christopher R.; Ryan, Mirelle J.; Booth, Frank W.

    1992-01-01

    This investigation tested whether eccentric resistance training could prevent soleus muscle atrophy during non-weight bearing. Adult female rats were randomly assigned to either weight bearing +/- intramuscular electrodes or non-weight bearing +/- intramuscular electrodes groups. Electrically stimulated maximal eccentric contractions were performed on anesthetized animals at 48-h intervals during the 10-day experiment. Non-weight bearing significantly reduced soleus muscle wet weight (28-31 percent) and noncollagenous protein content (30-31 percent) compared with controls. Eccentric exercise training during non-weight bearing attenuated but did not prevent the loss of soleus muscle wet weight and noncollagenous protein by 77 and 44 percent, respectively. The potential of eccentric exercise training as an effective and highly efficient counter-measure to non-weight-bearing atrophy is demonstrated in the 44 percent attenuation of soleus muscle noncollagenous protein loss by eccentric exercise during only 0.035 percent of the total non-weight-bearing time period.

  18. Anti-backlash gear bearings

    Science.gov (United States)

    Vranish, John M. (Inventor)

    2009-01-01

    A gear bearing having a first gear and a second gear, each having a plurality of teeth. Each gear operates on two non-parallel surfaces of the opposing gear teeth to perform both gear and bearing functions simultaneously. The gears are moving at substantially the same speed at their contact points. The gears may be roller gear bearings or phase-shifted gear bearings, and may be arranged in a planet/sun system or used as a transmission. One preferred embodiment discloses and describes an anti-backlash feature to counter ''dead zones'' in the gear bearing movement.

  19. Water Quality Management Studies for Water Resources Development in the Bear River Basin

    OpenAIRE

    1986-01-01

    Summary: The quality of water that develops in the proposed reservoirs of the Upper Bear River Storage Project will determine the possible uses of the water. Previous studies of water quality in the Bear River and its tributaries have reported water quality problems relating to nitrate ion, sanitary indicator bacteria, suspended solids, and phosphorus concentrations. Most point sources of water pollution inthe bas...

  20. Fatigue Analysis of an Outer Bearing Bush of a Kaplan Turbine

    Directory of Open Access Journals (Sweden)

    Doina Frunzaverde

    2011-01-01

    Full Text Available The paper presents the fatigue analysis of an outer bearing bush of aKaplan turbine. This outer bush, together with an inner one, bear thepin lever - trunion - blade subassembly of the runner blade operatingmechanism. For modeling and simulation, SolidWorks software is used.

  1. Effect of Bearing Housings on Centrifugal Pump Rotor Dynamics

    Science.gov (United States)

    Yashchenko, A. S.; Rudenko, A. A.; Simonovskiy, V. I.; Kozlov, O. M.

    2017-08-01

    The article deals with the effect of a bearing housing on rotor dynamics of a barrel casing centrifugal boiler feed pump rotor. The calculation of the rotor model including the bearing housing has been performed by the method of initial parameters. The calculation of a rotor solid model including the bearing housing has been performed by the finite element method. Results of both calculations highlight the need to add bearing housings into dynamic analyses of the pump rotor. The calculation performed by modern software packages is more a time-taking process, at the same time it is a preferred one due to a graphic editor that is employed for creating a numerical model. When it is necessary to view many variants of design parameters, programs for beam modeling should be used.

  2. Distribution of the hallucinogens N,N-dimethyltryptamine and 5-methoxy-N,N-dimethyltryptamine in rat brain following intraperitoneal injection: application of a new solid-phase extraction LC-APcI-MS-MS-isotope dilution method.

    Science.gov (United States)

    Barker, S A; Littlefield-Chabaud, M A; David, C

    2001-02-10

    A method for the solid-phase extraction (SPE) and liquid chromatographic-atmospheric pressure chemical ionization-mass spectrometric-mass spectrometric-isotope dilution (LC-APcI-MS-MS-ID) analysis of the indole hallucinogens N,N-dimethyltryptamine (DMT) and 5-methoxy DMT (or O-methyl bufotenin, OMB) from rat brain tissue is reported. Rats were administered DMT or OMB by the intraperitoneal route at a dose of 5 mg/kg and sacrificed 15 min post treatment. Brains were dissected into discrete areas and analyzed by the methods described as a demonstration of the procedure's applicability. The synthesis and use of two new deuterated internal standards for these purposes are also reported.

  3. Effect of propranolol on IL-10, visfatin, Hsp70, iNOS, TLR2, and survivin in amelioration of tumor progression and survival in Solid Ehrlich Carcinoma-bearing mice.

    Science.gov (United States)

    Abdin, Amany A; Soliman, Nema A; Saied, Eman M

    2014-12-01

    β-Adrenergic signaling could contribute to initiation and progression of breast cancer. This research investigated some potential mechanisms of propranolol in amelioration of progression and survival in breast cancer. Solid Ehrlich Carcinoma (SEC) xenograft model was induced in 30 mice divided into 3 groups; where group I served as untreated SEC group. In groups II and III, propranolol treatment i.p. in low (5mg/kg) and high dose (10mg/kg) caused significant increase in interleukin-10 (IL-10) and decrease in heat shock protein 70 (Hsp70) and inducible nitric oxide synthase (iNOS) activity with non significant change in visfatin in tumor tissues compared to untreated SEC. In untreated SEC, tumor volume (V) exhibited significant negative correlation with IL-10 levels and toll like receptor 2 (TLR2) expression with significant positive correlation with Hsp70 levels and iNOS activity. While propranolol in either doses caused reduction of tumor volume (V), and improved percentage tumor growth inhibition (% TGI) only its high dose exhibited significant impact on survival rate. Propranolol dose-dependent effect was evident for IL-10 and Hsp70, and even only the high dose significantly increased and decreased TLR2 and survivin, respectively. This comes in favor of recommending high dose of propranolol in cancer therapy. Nonetheless, use of low dose cannot be ignored when benefit to risk balance have to be considered. Propranolol could provide palliative effects in progression and survival of breast cancer that are mainly mediated via direct immunomodulatory and apoptotic mechanisms and probably associated with indirect anti-angiogenic activity. Copyright © 2014 Institute of Pharmacology, Polish Academy of Sciences. Published by Elsevier Urban & Partner Sp. z o.o. All rights reserved.

  4. Damping Bearings In High-Speed Turbomachines

    Science.gov (United States)

    Von Pragenau, George L.

    1994-01-01

    Paper presents comparison of damping bearings with traditional ball, roller, and hydrostatic bearings in high-speed cryogenic turbopumps. Concept of damping bearings described in "Damping Seals and Bearings for a Turbomachine" (MFS-28345).

  5. Simultaneous determination of a novel calcium entry blocker, monatepil maleate, and its metabolites in rat plasma by means of solid-phase extraction and reversed-phase liquid chromatography with electrochemical detection.

    Science.gov (United States)

    Kurono, M; Suzuki, K; Yoshida, K; Naruto, S

    1997-02-21

    A reversed-phase LC method with electrochemical detection is described for the simultaneous determination of monatepil maleate (AJ-2615, AJ), a novel calcium entry blocker, and its three S-oxidized metabolites in plasma. These compounds were extracted from plasma by solid-phase extraction and injected onto an ODS column. The determination limit in plasma (0.5 ml) was 10 ng/ml for AJ and 5 ng/ml for the three metabolites. The method was applied to the determination of AJ and the metabolites in rat plasma samples.

  6. Analysis of grease contamination influence on the internal radial clearance of ball bearings by thermographic inspection

    Directory of Open Access Journals (Sweden)

    Mišković Žarko Z.

    2016-01-01

    Full Text Available One of the most important factors influencing ball bearings service life is its internal radial clearance. However, this parameter is also very complex because it depends on applied radial load and ball bearings dimensions, surface finish and manufacturing materials. Thermal condition of ball bearings also significantly affects internal radial clearance. Despite many researches performed in order to find out relevant facts about different aspects of ball bearings thermal behaviour, only few of them are dealing with the real working conditions, where high concentration of solid contaminant particles is present. That’s why the main goal of research presented in this paper was to establish statistically significant correlation between ball bearings temperatures, their working time and concentration of contaminant particles in their grease. Because of especially difficult working conditions, the typical conveyor idlers bearings were selected as representative test samples and appropriate solid particles from open pit coal mines were used as artificial contaminants. Applied experimental methodology included thermographic inspection, as well as usage of custom designed test rig for ball bearings service life testing. Finally, by obtained experimental data processing in advanced software, statistically significant mathematical correlation between mentioned bearings characteristics was determined and applied in commonly used internal radial clearance equation. That is the most important contribution of performed research - the new equation and methodology for ball bearings internal clearance determination which could be used for eventual improvement of existing bearings service life equations. [Projekat Ministarstva nauke Republike Srbije, br. TR35029 i br. TR14033

  7. Aerospace applications of magnetic bearings

    Science.gov (United States)

    Downer, James; Goldie, James; Gondhalekar, Vijay; Hockney, Richard

    1994-01-01

    Magnetic bearings have traditionally been considered for use in aerospace applications only where performance advantages have been the primary, if not only, consideration. Conventional wisdom has been that magnetic bearings have certain performance advantages which must be traded off against increased weight, volume, electric power consumption, and system complexity. These perceptions have hampered the use of magnetic bearings in many aerospace applications because weight, volume, and power are almost always primary considerations. This paper will review progress on several active aerospace magnetic bearings programs at SatCon Technology Corporation. The magnetic bearing programs at SatCon cover a broad spectrum of applications including: a magnetically-suspended spacecraft integrated power and attitude control system (IPACS), a magnetically-suspended momentum wheel, magnetic bearings for the gas generator rotor of a turboshaft engine, a vibration-attenuating magnetic bearing system for an airborne telescope, and magnetic bearings for the compressor of a space-rated heat pump system. The emphasis of these programs is to develop magnetic bearing technologies to the point where magnetic bearings can be truly useful, reliable, and well tested components for the aerospace community.

  8. Nanoprecipitation in bearing steels

    Energy Technology Data Exchange (ETDEWEB)

    Barrow, A.T.W. [SKF University Technology Centre, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge CB2 3QZ (United Kingdom); Rivera-Diaz-del-Castillo, P.E.J., E-mail: pejr2@cam.ac.uk [SKF University Technology Centre, Department of Materials Science and Metallurgy, University of Cambridge, Cambridge CB2 3QZ (United Kingdom)

    2011-11-15

    {theta}-phase is the main hardening species in bearing steels and appears in both martensitically and bainitically hardened microstructures. This work presents a survey of the microstrucural features accompanying nanoprecipitation in bearing steels. Nanoprecipitate structures formed in 1C-1.5Cr wt.% with additions of Cr, Mn, Mo, Si and Ni are studied. The work is combined with thermodynamic calculations and neural networks to predict the expected matrix composition, and whether this will transform martensitically or bainitically. Martensite tetragonality, composition and the amount of retained austenite are related to hardness and the type of nanoprecipitate structures in martensitic grades. The {theta}-phase volume fraction, the duration of the bainite to austenite transformation and the amount of retained austenite are related to hardness and a detailed quantitative description of the precipitate nanostructures. Such description includes compositional studies using energy-dispersive spectroscopy, which shows that nanoprecipitate formation takes place under paraequilibrium. Special attention is devoted to a novel two-step bainite tempering process which shows maximum hardness; we prove that this is the most effective process for incorporating solute into the precipitates, which are finer than those resulting from one-step banitic transformation processes.

  9. Computational design of rolling bearings

    CERN Document Server

    Nguyen-Schäfer, Hung

    2016-01-01

    This book comprehensively presents the computational design of rolling bearings dealing with many interdisciplinary difficult working fields. They encompass elastohydrodynamics (EHD), Hertzian contact theory, oil-film thickness in elastohydrodynamic lubrication (EHL), bearing dynamics, tribology of surface textures, fatigue failure mechanisms, fatigue lifetimes of rolling bearings and lubricating greases, Weibull distribution, rotor balancing, and airborne noises (NVH) in the rolling bearings. Furthermore, the readers are provided with hands-on essential formulas based on the up-to-date DIN ISO norms and helpful examples for computational design of rolling bearings. The topics are intended for undergraduate and graduate students in mechanical and material engineering, research scientists, and practicing engineers who want to understand the interactions between these working fields and to know how to design the rolling bearings for automotive industry and many other industries.

  10. Prototype testing of magnetic bearings

    Science.gov (United States)

    Plant, David P.; Jayaraman, Chaitanya P.; Frommer, David A.; Kirk, James A.; Anand, Davinder K.

    1987-01-01

    The testing and evaluation of the performance of a magnetic bearing assembly for flywheel energy storage applications are discussed. The experimental set up for determining the passive radial stiffness, active radial stiffness, and curent force sensitivity of the coils follows the method developed by Frommer (1986). Magnetic bearings design should preclude saturation and current limiting in the desired operating range, so that the system will be linear. A larger linear range will lead to a more stable magnetic bearing.

  11. Grease lubrication in rolling bearings

    CERN Document Server

    Lugt, Piet M

    2012-01-01

    The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal

  12. Thermal conductivity of hydrate-bearing sediments

    Science.gov (United States)

    Cortes, Douglas D.; Martin, Ana I.; Yun, Tae Sup; Francisca, Franco M.; Santamarina, J. Carlos; Ruppel, Carolyn

    2009-11-01

    A thorough understanding of the thermal conductivity of hydrate-bearing sediments is necessary for evaluating phase transformation processes that would accompany energy production from gas hydrate deposits and for estimating regional heat flow based on the observed depth to the base of the gas hydrate stability zone. The coexistence of multiple phases (gas hydrate, liquid and gas pore fill, and solid sediment grains) and their complex spatial arrangement hinder the a priori prediction of the thermal conductivity of hydrate-bearing sediments. Previous studies have been unable to capture the full parameter space covered by variations in grain size, specific surface, degree of saturation, nature of pore filling material, and effective stress for hydrate-bearing samples. Here we report on systematic measurements of the thermal conductivity of air dry, water- and tetrohydrofuran (THF)-saturated, and THF hydrate-saturated sand and clay samples at vertical effective stress of 0.05 to 1 MPa (corresponding to depths as great as 100 m below seafloor). Results reveal that the bulk thermal conductivity of the samples in every case reflects a complex interplay among particle size, effective stress, porosity, and fluid-versus-hydrate filled pore spaces. The thermal conductivity of THF hydrate-bearing soils increases upon hydrate formation although the thermal conductivities of THF solution and THF hydrate are almost the same. Several mechanisms can contribute to this effect including cryogenic suction during hydrate crystal growth and the ensuing porosity reduction in the surrounding sediment, increased mean effective stress due to hydrate formation under zero lateral strain conditions, and decreased interface thermal impedance as grain-liquid interfaces are transformed into grain-hydrate interfaces.

  13. Thermal conductivity of hydrate-bearing sediments

    Science.gov (United States)

    Cortes, D.D.; Martin, A.I.; Yun, T.S.; Francisca, F.M.; Santamarina, J.C.; Ruppel, C.

    2009-01-01

    A thorough understanding of the thermal conductivity of hydrate-bearing sediments is necessary for evaluating phase transformation processes that would accompany energy production from gas hydrate deposits and for estimating regional heat flow based on the observed depth to the base of the gas hydrate stability zone. The coexistence of multiple phases (gas hydrate, liquid and gas pore fill, and solid sediment grains) and their complex spatial arrangement hinder the a priori prediction of the thermal conductivity of hydrate-bearing sediments. Previous studies have been unable to capture the full parameter space covered by variations in grain size, specific surface, degree of saturation, nature of pore filling material, and effective stress for hydrate-bearing samples. Here we report on systematic measurements of the thermal conductivity of air dry, water- and tetrohydrofuran (THF)-saturated, and THF hydrate-saturated sand and clay samples at vertical effective stress of 0.05 to 1 MPa (corresponding to depths as great as 100 m below seafloor). Results reveal that the bulk thermal conductivity of the samples in every case reflects a complex interplay among particle size, effective stress, porosity, and fluid-versus-hydrate filled pore spaces. The thermal conductivity of THF hydrate-bearing soils increases upon hydrate formation although the thermal conductivities of THF solution and THF hydrate are almost the same. Several mechanisms can contribute to this effect including cryogenic suction during hydrate crystal growth and the ensuing porosity reduction in the surrounding sediment, increased mean effective stress due to hydrate formation under zero lateral strain conditions, and decreased interface thermal impedance as grain-liquid interfaces are transformed into grain-hydrate interfaces. Copyright 2009 by the American Geophysical Union.

  14. Effects of DSP4 and dizolcipine on connectivity of solid E19 cortical grafts to ablated SmI region of adult rats; an in vivo electrophysiological study.

    Science.gov (United States)

    Zarei, Mojtaba; Stephenson, John D

    2002-08-30

    The functional connectivity of an embryonic graft implanted into the lesioned somatosensory cortex and the effect of DSP4 (a selective noradrenergic neurotoxin to noradrenergic terminals) and dizolcipine (a non-competitive NMDA receptor antagonist), was studied electrophysiologically. The forepaw representational area of the rat primary somatosensory cortex was lesioned unilaterally and, 3-4 weeks later, tissue from the same region of E19 rat embryos was implanted into the cavity. At 7-9 months later, the rats were anaesthetized and single unit activity was recorded from the grafts in response to contralateral forepaw, ipsilateral hindpaw and contralateral hindpaw stimulation and compared with that obtained in control rats, in rats pretreated with dizolcipine immediately after lesioning and in rats given DSP4 24 h before transplantation. Neurones within the graft were integrated into the host brain and developed a pattern of representation similar to that of intact rats, but with a reduced proportion of neurones exhibiting short-latency response to contralateral forepaw stimulation and an increased proportion responding to stimulation of more than one paw. Pretreatment with dizolcipine did not increase short-latency responses to stimulation of contralateral forepaw stimulation however pretreatment with DSP4 reduced such responses and increased proportion of inhibitory responses. It was concluded that the noradrenergic system plays an important role in establishing host-graft connectivity. The importance of further pharmacological studies on host-graft connectivity and the relation of such connections to neural plasticity were discussed.

  15. Cyanines Bearing Quaternary Azaaromatic Moieties

    OpenAIRE

    Sbliwa, Wanda; Matusiak, Grazyna; Bachowska, Barbara

    2006-01-01

    Selected cyanines bearing quaternary azaaromatic moieties are presented, showing their monomers, dimers and polymers, as well as their possible applications. Cyanines having NLO properties are also briefly described.

  16. Hydrostatic and hybrid bearing design

    CERN Document Server

    Rowe, W B

    1983-01-01

    Hydrostatic and Hybrid Bearing Design is a 15-chapter book that focuses on the bearing design and testing. This book first describes the application of hydrostatic bearings, as well as the device pressure, flow, force, power, and temperature. Subsequent chapters discuss the load and flow rate of thrust pads; circuit design, flow control, load, and stiffness; and the basis of the design procedures and selection of tolerances. The specific types of bearings, their design, dynamics, and experimental methods and testing are also shown. This book will be very valuable to students of engineering des

  17. The 9LLUC/Wistar rat glioma model is not suitable for immunotherapy

    Institute of Scientific and Technical Information of China (English)

    Liping Yang; Jingxiang Zhao; Guihong Zhou; Yunfang Wang; Lusi Li; Hongfeng Yuan; Xue Nan; Lidong Guan; Xuetao Pei

    2012-01-01

    The availability of a well-characterized animal brain tumor model will play an important role in identifying treatments for human brain tumors. Wistar rats bearing 9L glioma cells can develop solid, well-circumcised tumors, and may be a useful animal model for the evaluation of various therapeutic approaches for gliosarcomas. In this study, the 9L/Wistar rat glioma model was produced by intracerebral implantation of 9LLUC glioma cells syngenic to Fischer 344 (F344) rats. Bioluminescence imaging showed that tumors progressively grew from day 7 to day 21 in 9LLUC/F344 rats, and tumor regression was found in some 9LLUC/Wistar rats. Hematoxylin-eosin staining verified that intracranial tumors were gliomas. Immunohistochemistry results demonstrated that no CD4- and CD8-positive cells were found in the syngeneic 9LLUC/F344 model. However, many infiltrating CD4- and CD8-positive cells were observed within the tumors of the 9LLUC/Wistar model. Our data suggests that compared with 9L/F344 rats, 9L glioma Wistar rats may not be suitable for evaluating brain glioma immunotherapies, even though the model induced an immune response and exhibited tumor regression.

  18. High-Performance Ball Bearing

    Science.gov (United States)

    Bursey, Roger W., Jr.; Haluck, David A.; Olinger, John B.; Owen, Samuel S.; Poole, William E.

    1995-01-01

    High-performance bearing features strong, lightweight, self-lubricating cage with self-lubricating liners in ball apertures. Designed to operate at high speed (tens of thousands of revolutions per minute) in cryogenic environment like liquid-oxygen or liquid-hydrogen turbopump. Includes inner race, outer race, and cage keeping bearing balls equally spaced.

  19. Permanent-Magnet Meissner Bearing

    Science.gov (United States)

    Robertson, Glen A.

    1994-01-01

    Permanent-magnet meissner bearing features inherently stable, self-centering conical configuration. Bearing made stiffer or less stiff by selection of magnets, springs, and spring adjustments. Cylindrical permanent magnets with axial magnetization stacked coaxially on rotor with alternating polarity. Typically, rare-earth magnets used. Magnets machined and fitted together to form conical outer surface.

  20. High-Performance Ball Bearing

    Science.gov (United States)

    Bursey, Roger W., Jr.; Haluck, David A.; Olinger, John B.; Owen, Samuel S.; Poole, William E.

    1995-01-01

    High-performance bearing features strong, lightweight, self-lubricating cage with self-lubricating liners in ball apertures. Designed to operate at high speed (tens of thousands of revolutions per minute) in cryogenic environment like liquid-oxygen or liquid-hydrogen turbopump. Includes inner race, outer race, and cage keeping bearing balls equally spaced.

  1. Superconducting bearings for flywheel applications

    DEFF Research Database (Denmark)

    Abrahamsen, A.B.

    2001-01-01

    A literature study on the application of superconducting bearings in energy storage flywheel systems. The physics of magnetic levitation and superconductors are presented in the first part of the report, followed by a discussion of the literature found onthe applications of superconducting bearings...

  2. What about the Javan Bear?

    NARCIS (Netherlands)

    Jentink, F.A.

    1898-01-01

    The other day I read in a dutch popular periodical a paper dealing with the different species of Bears and their geographical distribution. To my great surprise the Malayan Bear was mentioned from Java: the locality Java being quite new to me I wrote to the author of that paper and asked him some in

  3. Space Station alpha joint bearing

    Science.gov (United States)

    Everman, Michael R.; Jones, P. Alan; Spencer, Porter A.

    1987-01-01

    Perhaps the most critical structural system aboard the Space Station is the Solar Alpha Rotary Joint which helps align the power generation system with the sun. The joint must provide structural support and controlled rotation to the outboard transverse booms as well as power and data transfer across the joint. The Solar Alpha Rotary Joint is composed of two transition sections and an integral, large diameter bearing. Alpha joint bearing design presents a particularly interesting problem because of its large size and need for high reliability, stiffness, and on orbit maintability. The discrete roller bearing developed is a novel refinement to cam follower technology. It offers thermal compensation and ease of on-orbit maintenance that are not found in conventional rolling element bearings. How the bearing design evolved is summarized. Driving requirements are reviewed, alternative concepts assessed, and the selected design is described.

  4. Geophagy by yellowstone grizzly bears

    Science.gov (United States)

    Mattson, D.J.; Green, G.I.; Swalley, R.

    1999-01-01

    We documented 12 sites in the Yellowstone ecosystem where grizzly bears (Ursus arctos horribilis) had purposefully consumed soil (an activity known as geophagy). We also documented soil in numerous grizzly bear feces. Geophagy primarily occurred at sites barren of vegetation where surficial geology had been modified by geothermal activity. There was no evidence of ungulate use at most sites. Purposeful consumption of soil by bears peaked first from March to May and again from August to October, synchronous with peaks in consumption of ungulate meat and mushrooms. Geophageous soils were distinguished from ungulate mineral licks and soils in general by exceptionally high concentrations of potassium (K) and high concentrations of magnesium (Mg) and sulphur (S). Our results do not support the hypotheses that bears were consuming soil to detoxify secondary compounds in grazed foliage, as postulated for primates, or to supplement dietary sodium, as known for ungulates. Our results suggest that grizzly bears could have been consuming soil as an anti-diarrheal.

  5. 负重爬梯与负重跑台运动对大鼠股骨微结构及力学特性的影响%The influence of weight-bearing treadmill running and climbing-ladder exercise on micro-structure and biomechanical properties of rats femur

    Institute of Scientific and Technical Information of China (English)

    唐量; 高小航; 赵新娟; 张静; 孙丽君

    2015-01-01

    观察负重爬梯运动与负重跑台运动对大鼠股骨微结构及生物力学的影响,分别评价两种运动对股骨的作用效果。将28只16周 SD 雄性大鼠随机分为3个组:负重跑台运动组(WR),负重爬梯运动组(LC)以及对照组(CON)。WR 组在晚上进行每周6次持续8周无坡度15 m/min 的负重跑台运动,每组运动2 min,间歇2 min,共10组,周日休息;LC 组在晚上同期进行负重爬梯训练3组,每组10次,每次间歇2 min;CON 组不施加干预。实验8周后,戊巴比妥钠麻醉处死,并按解剖位置截取大鼠左右股骨分别用来进行 Micro-CT 扫描和三点弯曲实验,对其微结构及生物力学参数进行分析。Micro-CT 定量分析显示,与 CON 组对比,WR 组与 CL 组的骨小梁数量(Tb. N)和骨体积分数(BV/TV)均出现显著性增加,骨小梁分离度(Tb.Sp)和结构模型指数(SMI)均呈现显著性降低;三点实验显示,与 WR 组和 CON 组对比,CL 组的弹性模量(MOE)呈现出显著性增加;与 CON 组对比,WR 组与 CL 组的最大载荷(ML)均出现显著性增加,WR 组的刚度出现显著性增加。以上结果表明,经过8周的负重训练,两种训练方式均能在不同程度上改变骨的微结构及生物力学特性,负重爬梯训练的效果优于负重跑台训练。%The aim of the study was to investigate the micro-structure and biomechanical proper-ties of femur of rats that treated with weight-bearing treadmill running and climb ladder,and e-valuating the meaning of two exercise to the femur.Twenty-eight male Sprague-Dawley rats were randomly divided into 3 groups:weight-bearing treadmill group (WR),weight-bearing climbing ladder group (CL),control group (CON).WR group were trained,running on a motor-driven treadmill at a speed of 15 m/min (0 incline)bearing with 35% their body-weight mass added,two minutes running and two minutes intervals

  6. Thin solid-lubricant films in space

    Science.gov (United States)

    Roberts, E. W.

    Low-friction films of thickness as low as 1 micron, created through sputter-deposition of low shear strength materials, are required in spacecraft applications requiring low power dissipation, such as cryogenic devices, and low torque noise, such as precision-pointing mechanisms. Due to their thinness, these coatings can be applied to high precision-machined tribological components without compromising their functional accuracy. Attention is here given to the cases of thin solid films for ball bearings, gears, and journal bearings.

  7. Magnetic Bearings at Draper Laboratory

    Science.gov (United States)

    Kondoleon, Anthony S.; Kelleher, William P.; Possel, Peter D.

    1996-01-01

    Magnetic bearings, unlike traditional mechanical bearings, consist of a series of components mated together to form a stabilized system. The correct design of the actuator and sensor will provide a cost effective device with low power requirements. The proper choice of a control system utilizes the variables necessary to control the system in an efficient manner. The specific application will determine the optimum design of the magnetic bearing system including the touch down bearing. Draper for the past 30 years has been a leader in all these fields. This paper summarizes the results carried out at Draper in the field of magnetic bearing development. A 3-D radial magnetic bearing is detailed in this paper. Data obtained from recently completed projects using this design are included. One project was a high radial load (1000 pound) application. The second was a high speed (35,000 rpm), low loss flywheel application. The development of a low loss axial magnetic bearing is also included in this paper.

  8. Early high-sodium solid diet does not affect sodium intake, sodium preference, blood volume and blood pressure in adult Wistar-Kyoto rats.

    Science.gov (United States)

    Ufnal, Marcin; Drapala, Adrian; Sikora, Mariusz; Zera, Tymoteusz

    2011-07-01

    A high-Na diet may lead to the development of hypertension in both humans and rats; however, the causes of Na intake in amounts greater than physiologically needed as well as the mechanisms whereby high-Na food elevates blood pressure are not clear. Therefore, we decided to test the hypothesis that a high-Na diet introduced after suckling affects Na intake, food preference, resting blood pressure and blood volume in adult rats. Male Wistar-Kyoto (WKY) rats, 4 weeks old, were divided into three groups and placed on either a high-Na (3.28%), a medium-Na (0.82%) or a regular diet (0.22%) with the same energy content for 8 weeks. Subsequently, food preference, resting arterial blood pressure, blood volume, plasma osmolality and Na blood level were evaluated. When offered a choice of diets, all the groups preferred the regular chow, and there was no significant difference in total Na intake between the groups. When the rats experienced the change from their initial chow to a new one with different Na content, they continued to eat the same amount of food. Body weight, resting arterial blood pressure, blood volume, plasma osmolality and Na blood level were comparable between the groups. In conclusion, the results show that a high-Na diet introduced immediately after suckling does not affect Na preference and Na intake in adult WKY rats. Furthermore, the findings provide evidence that both blood volume and arterial blood pressure are highly protected in normotensive rats on a high-Na diet.

  9. Eastern slopes grizzly bear project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-01-01

    The cumulative effects of human activities on the grizzly bears in the central Canadian Rockies are not well known. As a result, a project was initiated in 1994 to address the urgent requirement for accurate scientific information on the habitat and populations of grizzly bears in the area of the Banff National Park and Kananaskis Country. This area is probably the most heavily used and developed area where the grizzly still survives. The information gathered throughout the course of this study will be used to better protect and manage the bears and other sensitive carnivores in the region. Using telemetry, researchers are monitoring 25 grizzly bears which were radio-collared in a 22,000 square-kilometer area in the upper Bow Valley drainage of the eastern Alberta slopes. The researchers involved in the project are working with representatives from Husky Oil and Talisman Energy on the sound development of the Moose Mountain oil and gas field without adversely affecting the grizzly bear population. Information collected over seven years indicated that the grizzly bears have few and infrequent offspring. Using the information gathered so far, the location of the Moose Mountain to Jumping Pound pipeline was carefully selected, since the bears recover very slowly from high mortality, and also considering that the food and cover had already been compromised by the high number of roads, trails and other human activities in the area. The status of the population and habitat of the grizzly bear will be assessed upon the conclusion of the field research phase in 2001. Models will be updated using the data obtained during eight years and will assist in the understanding of complex variables that affect grizzly bears.

  10. EFFECT OF BEARING MACROGEOMETRY ON BEARING PERFORMANCE IN ELASTOHYDRODYNAMIC LUBRICATION

    Directory of Open Access Journals (Sweden)

    Emin GÜLLÜ

    2000-01-01

    Full Text Available During manufacturing, ideal dimension and mutual positioning of machine elements proposed in project desing can be achieved only within certain range of tolerances. These tolerances, being classified in two groups, related to micro and macro geometry of machine elements, don't have to effect the functioning of these elements. So, as for all machine elements, investigation of the effects of macro and micro tolerances for journal bearings is important. In this study, we have investigated the effect of macro geometric irregularities of journal bearings on performance characteristics. In this regard, we have studied the change of bearing performance in respect to deviation from ideal circle for an elliptic shaft with small ovality rolling in circular journal bearing.

  11. Solid propellants.

    Science.gov (United States)

    Marsh, H. E., Jr.; Hutchison, J. J.

    1972-01-01

    The basic principles underlying propulsion by rocket motor are examined together with the configuration of a solid propellant motor. Solid propellants and their preparation are discussed, giving attention to homogeneous propellants, composite propellants, energetic considerations in choosing a solid propellant, the processing of composite propellants, and some examples of new developments. The performance of solid propellants is investigated, taking into account characteristics velocity, the specific impulse, and performance calculations. Aspects of propellant development considered include nonperformance requirements for solid propellants, the approach to development, propellant mechanical properties, and future trends.

  12. Non-contacting "snubber bearing" for passive magnetic bearing systems

    Energy Technology Data Exchange (ETDEWEB)

    Post, Richard F

    2017-08-22

    A new non-contacting magnetic "snubber" bearing is provided for application to rotating systems such as vehicular electromechanical battery systems subject to frequent accelerations. The design is such that in the equilibrium position the drag force of the snubber is very small (milliwatts). However in a typical case, if the rotor is displaced by as little as 2 millimeters a large restoring force is generated without any physical contact between the stationary and rotating parts of the snubber bearing.

  13. Bears, Big and Little. Young Discovery Library Series.

    Science.gov (United States)

    Pfeffer, Pierre

    This book is written for children 5 through 10. Part of a series designed to develop their curiosity, fascinate them and educate them, this volume describes: (1) the eight species of bears, including black bear, brown bear, grizzly bear, spectacled bear, sun bear, sloth bear, polar bear, and giant panda; (2) geographical habitats of bears; (3)…

  14. A Passive Magnetic Bearing Flywheel

    Science.gov (United States)

    Siebert, Mark; Ebihara, Ben; Jansen, Ralph; Fusaro, Robert L.; Morales, Wilfredo; Kascak, Albert; Kenny, Andrew

    2002-01-01

    A 100 percent passive magnetic bearing flywheel rig employing no active control components was designed, constructed, and tested. The suspension clothe rotor was provided by two sets of radial permanent magnetic bearings operating in the repulsive mode. The axial support was provided by jewel bearings on both ends of the rotor. The rig was successfully operated to speeds of 5500 rpm, which is 65 percent above the first critical speed of 3336 rpm. Operation was not continued beyond this point because of the excessive noise generated by the air impeller and because of inadequate containment in case of failure. Radial and axial stiffnesses of the permanent magnetic bearings were experimentally measured and then compared to finite element results. The natural damping of the rotor was measured and a damping coefficient was calculated.

  15. Gas bearing operates in vacuum

    Science.gov (United States)

    Perkins, G. S.

    1975-01-01

    Bearing has restrictions to reduce air leaks and is connected to external pumpout facility which removes exhausted air. Token amount of air which is lost to vacuum is easily removed by conventional vacuum pump.

  16. Mixed-mu superconducting bearings

    Energy Technology Data Exchange (ETDEWEB)

    Hull, John R. (Hinsdale, IL); Mulcahy, Thomas M. (Western Springs, IL)

    1998-01-01

    A mixed-mu superconducting bearing including a ferrite structure disposed for rotation adjacent a stationary superconductor material structure and a stationary permanent magnet structure. The ferrite structure is levitated by said stationary permanent magnet structure.

  17. Bear study, Karluk Lake, 1956

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Based on observations, 117 bears were estimated to live in the Karluk Lake area. The estimate was lower than estimates from 1952, and 1954-1955. Annual loss to...

  18. Myrmecophagy by Yellowstone grizzly bears

    Science.gov (United States)

    Mattson, D.J.

    2001-01-01

    I used data collected during a study of radio-marked grizzly bears (Ursus arctos horribilis) in the Yellowstone region from 1977 to 1992 to investigate myrmecophagy by this population. Although generally not an important source of energy for the bears (averaging 8 mm long) nested in logs over small ants (6 mm long) nested under stones. Optimal conditions for consumption of ants occurred on the warmest sites with ample substrate suitable for ant nests. For ants in mounds, this occurred at low elevations at non-forested sites. For ants in logs, this occurred at low elevations or on southerly aspects where there was abundant, large-diameter, well-decomposed woody debris under an open forest canopy. Grizzly bears selected moderately decomposed logs 4a??5 dm in diameter at midpoint. Ants will likely become a more important food for Yellowstone's grizzly bears as currently important foods decline, owing to disease and warming of the regional climate.

  19. Influence of particles on the loading capacity and the temperature rise of water film in Ultra-high speed hybrid bearing

    Science.gov (United States)

    Zhu, Aibin; Li, Pei; Zhang, Yefan; Chen, Wei; Yuan, Xiaoyang

    2015-04-01

    Ultra-high speed machining technology enables high efficiency, high precision and high integrity of machined surface. Previous researches of hybrid bearing rarely consider influences of solid particles in lubricant and ultra-high speed of hybrid bearing, which cannot be ignored under the high speed and micro-space conditions of ultra-high speed water-lubricated hybrid bearing. Considering the impact of solid particles in lubricant, turbulence and temperature viscosity effects of lubricant, the influences of particles on pressure distribution, loading capacity and the temperature rise of the lubricant film with four-step-cavity ultra-high speed water-lubricated hybrid bearing are presented in the paper. The results show that loading capacity of the hybrid bearing can be affected by changing the viscosity of the lubricant, and large particles can improve the bearing loading capacity higher. The impact of water film temperature rise produced by solid particles in lubricant is related with particle diameter and minimum film thickness. Compared with the soft particles, hard particles cause the more increasing of water film temperature rise and loading capacity. When the speed of hybrid bearing increases, the impact of solid particles on hybrid bearing becomes increasingly apparent, especially for ultra-high speed water-lubricated hybrid bearing. This research presents influences of solid particles on the loading capacity and the temperature rise of water film in ultra-high speed hybrid bearings, the research conclusions provide a new method to evaluate the influence of solid particles in lubricant of ultra-high speed water-lubricated hybrid bearing, which is important to performance calculation of ultra-high speed hybrid bearings, design of filtration system, and safe operation of ultra-high speed hybrid bearings.

  20. Influence of Particles on the Loading Capacity and the Temperature Rise of Water Film in Ultra-high Speed Hybrid Bearing

    Institute of Scientific and Technical Information of China (English)

    ZHU Aibin; LI Pei; ZHANG Yefan; CHEN Wei; YUAN Xiaoyang

    2015-01-01

    Ultra-high speed machining technology enables high efficiency, high precision and high integrity of machined surface. Previous researches of hybrid bearing rarely consider influences of solid particles in lubricant and ultra-high speed of hybrid bearing, which cannot be ignored under the high speed and micro-space conditions of ultra-high speed water-lubricated hybrid bearing. Considering the impact of solid particles in lubricant, turbulence and temperature viscosity effects of lubricant, the influences of particles on pressure distribution, loading capacity and the temperature rise of the lubricant film with four-step-cavity ultra-high speed water-lubricated hybrid bearing are presented in the paper. The results show that loading capacity of the hybrid bearing can be affected by changing the viscosity of the lubricant, and large particles can improve the bearing loading capacity higher. The impact of water film temperature rise produced by solid particles in lubricant is related with particle diameter and minimum film thickness. Compared with the soft particles, hard particles cause the more increasing of water film temperature rise and loading capacity. When the speed of hybrid bearing increases, the impact of solid particles on hybrid bearing becomes increasingly apparent, especially for ultra-high speed water-lubricated hybrid bearing. This research presents influences of solid particles on the loading capacity and the temperature rise of water film in ultra-high speed hybrid bearings, the research conclusions provide a new method to evaluate the influence of solid particles in lubricant of ultra-high speed water-lubricated hybrid bearing, which is important to performance calculation of ultra-high speed hybrid bearings, design of filtration system, and safe operation of ultra-high speed hybrid bearings.

  1. Nonlinear Control of Magnetic Bearings

    Institute of Scientific and Technical Information of China (English)

    Khac Duc Do; Dang Hoe Nguyen; Thanh Binh Nguyen

    2010-01-01

    In this paper, recent results controling nonlinear systems with output tracking error constraints are applied to the design of new tracking controllers for magnetic bearings. The proposed controllers can force the rotor to track a bounded and sufficiently smooth refer-ence trajectory asymptotically and guarantee non-contactedness be-tween the rotor and the stator of the magnetic bearings. Simulation results are included to illustrate the effectiveness of the proposed con-trollers.

  2. Biomimetic nanocomposites of carboxymethyl cellulose-hydroxyapatite: novel three dimensional load bearing bone grafts.

    Science.gov (United States)

    Garai, Subhadra; Sinha, Arvind

    2014-03-01

    An innovative biomimetic synthesis of novel three dimensional micro/macro porous carboxymethyl cellulose (CMC)-hydroxyapatite (HA) nanocomposites having four systematically different compositions has been established for its possible application as a load bearing synthetic bone graft. Our process, being in situ, involves a simple and cost effective route akin to a matrix mediated biomineralization process. Developed synthesis route not only controls the size of HA particles in the range of 15-50 nm, embedded in CMC matrix, but also assists in the formation of a mechanically strong three dimensional nanocomposite structures due to physical cross linking of HA impregnated CMC matrix. The process does not involve any toxic cross linker and works at near ambient conditions. The nanocomposites are systematically structurally and mechanically characterized using various techniques like scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier transform IR (FTIR), solid state (13)C nuclear magnetic resonance ((13)C NMR), thermo-gravimetric analysis (TGA) and Universal mechanical test. It reveals that the ionic/polar or electrostatic interactions are the main driving force for formation of load bearing three dimensional nanocomposites via a process similar to matrix mediated biomineralization. Compressive strength and compressive modulus of nanocomposites, being in the range of 1.74-12 MPa and 157-330 MPa, respectively, meet the desired range of compressive strength for the synthetic grafts used in cancellous bone. An increase in the compressive strength with increase in the porosity has been an interesting observation in the present study. In vitro cytotoxicity of the synthesized nanocomposites has been evaluated using bone marrow mesenchymal stem cells (BMSC) isolated from Wistar rat.

  3. 77 FR 70423 - Black Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC...

    Science.gov (United States)

    2012-11-26

    ... Energy Regulatory Commission Black Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC; Notice of Application for Partial Transfer of Licenses, and Soliciting Comments and Motions To Intervene On October 25, 2012, Black Bear Hydro Partners, LLC, sole licensee (transferor)...

  4. A rapid solid-phase extraction method for measurement of non-metabolised peripheral benzodiazepine receptor ligands, [{sup 18}F]PBR102 and [{sup 18}F]PBR111, in rat and primate plasma

    Energy Technology Data Exchange (ETDEWEB)

    Katsifis, Andrew, E-mail: andrew.katsifis@ansto.gov.a [ANSTO LifeSciences, Sydney, 2234 (Australia); Loc' h, Christian [ANSTO LifeSciences, Sydney, 2234 (Australia); Henderson, David [Department of PET and Nuclear Medicine, Royal Prince Alfred Hospital, Sydney, 2050 (Australia); Bourdier, Thomas; Pham, Tien; Greguric, Ivan [ANSTO LifeSciences, Sydney, 2234 (Australia); Lam, Peter [Department of PET and Nuclear Medicine, Royal Prince Alfred Hospital, Sydney, 2050 (Australia); Callaghan, Paul; Mattner, Filomena [ANSTO LifeSciences, Sydney, 2234 (Australia); Eberl, Stefan [Department of PET and Nuclear Medicine, Royal Prince Alfred Hospital, Sydney, 2050 (Australia); School of Information Technology, University of Sydney, Sydney, 2006 (Australia); Fulham, Michael [Department of PET and Nuclear Medicine, Royal Prince Alfred Hospital, Sydney, 2050 (Australia); School of Information Technology, University of Sydney, Sydney, 2006 (Australia); Sydney Medical School, University of Sydney, Sydney, 2006 (Australia)

    2011-01-15

    Objectives: To develop a rapid and reliable method for estimating non-metabolised PBR ligands fluoroethoxy ([{sup 18}F]PBR102)- and fluoropropoxy ([{sup 18}F]PBR111)-substituted 2-(6-chloro-2-phenyl)imidazo[1,2-a]pyridine-3-yl)-N,N-diethylacetamides in plasma. Methods: Rats and baboons were imaged with PET up to 2 h postinjection of [{sup 18}F]PBR102 and [{sup 18}F]PBR111 under baseline conditions, after pre-blocking or displacement with PK11195. Arterial plasma samples were directly analysed by reverse-phase solid-phase extraction (RP-SPE) and RP-HPLC and by normal-phase TLC. SPE cartridges were successively washed with acetonitrile/water mixtures. SPE eluant radioactivity was measured in a {gamma}-counter to determine the parent compound fraction and then analysed by HPLC and TLC for validation. Results: In SPE, hydrophilic and lipophilic radiolabelled metabolites were eluted in water and 20% acetonitrile/water. All non-metabolised [{sup 18}F]PBR102 and [{sup 18}F]PBR111 were in SPE acetonitrile fraction as confirmed by HPLC and TLC analysis. Unchanged (%) [{sup 18}F]PBR102 and [{sup 18}F]PBR111 from SPE analysis in rat and baboon plasma agreed with those from HPLC and TLC analysis. In rats and baboons, the fraction of unchanged tracer followed a bi-exponential decrease, with half-lives of 7 to 10 min for the fast component and >80 min for the slow component for both tracers. Conclusions: Direct plasma SPE analysis of [{sup 18}F]PBR102 and [{sup 18}F]PBR111 can reliably estimate parent compound fraction. SPE was superior to HPLC for samples with low activity; it allows rapid and accurate metabolite analysis of a large number of plasma samples for improved estimation of metabolite-corrected input function during quantitative PET imaging studies.

  5. Solid lubricants

    Science.gov (United States)

    Sliney, Harold E.

    1993-01-01

    The state of knowledge of solid lubricants is reviewed. The results of research on solid lubricants from the 1940's to the present are presented from a historical perspective. Emphasis is placed largely, but not exclusively, on work performed at NASA Lewis Research Center with a natural focus on aerospace applications. However, because of the generic nature of the research, the information presented in this review is applicable to most areas where solid lubricant technology is useful.

  6. Solid Matter

    CERN Document Server

    Angelo, Joseph A

    2011-01-01

    Supported by a generous quantity of full-color illustrations and interesting sidebars, Solid Matter introduces the basic characteristics and properties of solid matter. It briefly describes the cosmic connection of the elements, leading readers through several key events in human pre-history that resulted in more advanced uses of matter in the solid state. Chapters include:. -Solid Matter: An Initial Perspective. -Physical Behavior of Matter. -The Gravity of Matter. -Fundamentals of Materials Science. -Rocks and Minerals. -Metals. -Building Materials. -Carbon Earth's Most Versatile Element. -S

  7. Superconductor bearings, flywheels and transportation

    Science.gov (United States)

    Werfel, F. N.; Floegel-Delor, U.; Rothfeld, R.; Riedel, T.; Goebel, B.; Wippich, D.; Schirrmeister, P.

    2012-01-01

    This paper describes the present status of high temperature superconductors (HTS) and of bulk superconducting magnet devices, their use in bearings, in flywheel energy storage systems (FESS) and linear transport magnetic levitation (Maglev) systems. We report and review the concepts of multi-seeded REBCO bulk superconductor fabrication. The multi-grain bulks increase the averaged trapped magnetic flux density up to 40% compared to single-grain assembly in large-scale applications. HTS magnetic bearings with permanent magnet (PM) excitation were studied and scaled up to maximum forces of 10 kN axially and 4.5 kN radially. We examine the technology of the high-gradient magnetic bearing concept and verify it experimentally. A large HTS bearing is tested for stabilizing a 600 kg rotor of a 5 kWh/250 kW flywheel system. The flywheel rotor tests show the requirement for additional damping. Our compact flywheel system is compared with similar HTS-FESS projects. A small-scale compact YBCO bearing with in situ Stirling cryocooler is constructed and investigated for mobile applications. Next we show a successfully developed modular linear Maglev system for magnetic train operation. Each module levitates 0.25t at 10 mm distance during one-day operation without refilling LN2. More than 30 vacuum cryostats containing multi-seeded YBCO blocks are fabricated and are tested now in Germany, China and Brazil.

  8. Characterization of chemically induced ovarian carcinomas in an ethanol-preferring rat model: influence of long-term melatonin treatment.

    Directory of Open Access Journals (Sweden)

    Luiz Gustavo A Chuffa

    Full Text Available Ovarian cancer is the fourth most common cause of cancer deaths among women, and chronic alcoholism may exert co-carcinogenic effects. Because melatonin (mel has oncostatic properties, we aimed to investigate and characterize the chemical induction of ovarian tumors in a model of ethanol-preferring rats and to verify the influence of mel treatment on the overall features of these tumors. After rats were selected to receive ethanol (EtOH, they were surgically injected with 100 µg of 7,12-dimethyl-benz[a]anthracene (DMBA plus sesame oil directly under the left ovarian bursa. At 260 days old, half of the animals received i.p. injections of 200 µg mel/100 g b.w. for 60 days. Four experimental groups were established: Group C, rats bearing ovarian carcinomas (OC; Group C+EtOH, rats voluntarily consuming 10% (v/v EtOH and bearing OC; Group C+M, rats bearing OC and receiving mel; and Group C+EtOH+M, rats with OC consuming EtOH and receiving mel. Estrous cycle and nutritional parameters were evaluated, and anatomopathological analyses of the ovarian tumors were conducted. The incidence of ovarian tumors was higher in EtOH drinking animals 120 days post-DMBA administration, and mel efficiently reduced the prevalence of some aggressive tumors. Although mel promoted high EtOH consumption, it was effective in synchronizing the estrous cycle and reducing ovarian tumor mass by 20%. While rats in the C group displayed cysts containing serous fluid, C+EtOH rats showed solid tumor masses. After mel treatment, the ovaries of these rats presented as soft and mobile tissues. EtOH consumption increased the incidence of serous papillary carcinomas and sarcomas but not clear cell carcinomas. In contrast, mel reduced the incidence of sarcomas, endometrioid carcinomas and cystic teratomas. Combination of DMBA with EtOH intake potentiated the incidence of OC with malignant histologic subtypes. We concluded that mel reduces ovarian masses and the incidence of

  9. Characterization of Chemically Induced Ovarian Carcinomas in an Ethanol-Preferring Rat Model: Influence of Long-Term Melatonin Treatment

    Science.gov (United States)

    Chuffa, Luiz Gustavo A.; Fioruci-Fontanelli, Beatriz A.; Mendes, Leonardo O.; Fávaro, Wagner J.; Pinheiro, Patricia Fernanda F.; Martinez, Marcelo; Martinez, Francisco Eduardo

    2013-01-01

    Ovarian cancer is the fourth most common cause of cancer deaths among women, and chronic alcoholism may exert co-carcinogenic effects. Because melatonin (mel) has oncostatic properties, we aimed to investigate and characterize the chemical induction of ovarian tumors in a model of ethanol-preferring rats and to verify the influence of mel treatment on the overall features of these tumors. After rats were selected to receive ethanol (EtOH), they were surgically injected with 100 µg of 7,12-dimethyl-benz[a]anthracene (DMBA) plus sesame oil directly under the left ovarian bursa. At 260 days old, half of the animals received i.p. injections of 200 µg mel/100 g b.w. for 60 days. Four experimental groups were established: Group C, rats bearing ovarian carcinomas (OC); Group C+EtOH, rats voluntarily consuming 10% (v/v) EtOH and bearing OC; Group C+M, rats bearing OC and receiving mel; and Group C+EtOH+M, rats with OC consuming EtOH and receiving mel. Estrous cycle and nutritional parameters were evaluated, and anatomopathological analyses of the ovarian tumors were conducted. The incidence of ovarian tumors was higher in EtOH drinking animals 120 days post-DMBA administration, and mel efficiently reduced the prevalence of some aggressive tumors. Although mel promoted high EtOH consumption, it was effective in synchronizing the estrous cycle and reducing ovarian tumor mass by 20%. While rats in the C group displayed cysts containing serous fluid, C+EtOH rats showed solid tumor masses. After mel treatment, the ovaries of these rats presented as soft and mobile tissues. EtOH consumption increased the incidence of serous papillary carcinomas and sarcomas but not clear cell carcinomas. In contrast, mel reduced the incidence of sarcomas, endometrioid carcinomas and cystic teratomas. Combination of DMBA with EtOH intake potentiated the incidence of OC with malignant histologic subtypes. We concluded that mel reduces ovarian masses and the incidence of adenocarcinomas in

  10. Parametric analysis of thermal effect on hydrostatic slipper bearing capacity of axial piston pump

    Institute of Scientific and Technical Information of China (English)

    汤何胜; 訚耀保; 张阳; 李晶

    2016-01-01

    Hydrostatic slipper was often used in friction bearing design, allowing improvement of the latter’s dynamic behavior. The influence of thermal effect on hydrostatic slipper bearing capacity of axial piston pump was investigated. A set of lumped parameter mathematical models were developed based on energy conservation law of slipper/ swash plate pair. The results show that thermal equilibrium clearance due to solid thermal deformation periodically changes with shaft rotational angle. The slipper bearing capacity increases dramatically with decreasing thermal equilibrium clearance. In order to improve the slipper bearing capacity, length-to-diameter ratio of fixed damper varies from 3.5 to 8.75 and radius ratio of slipper varies from 1.5 to 2.0. In addition, the higher slipper thermal conductivity is useful to improve slipper bearing capability, but the thermal equilibrium clearance is not compromised.

  11. Sensitivity analysis of size effect on the performance of hydrostatic bearing

    Directory of Open Access Journals (Sweden)

    Dongju Chen

    2016-01-01

    Full Text Available For size effect on solid-liquid interface of hydrostatic bearing oil film gap flow in two-dimension, fluid dynamic method is applied to investigate the influence of size effect on bearing capacity, dynamic stiffness and other performances. With the consideration of size effect, Reynolds equation is modified by adopting velocity slip boundary condition into Reynolds equation. The sensitivity factors are used to make a quantitative and qualitative analysis. Numerical simulation results show that size effect will affect bearing performances to a certain degree and the effect curve of size effect on bearing performances are given. The four maximum oil film pressures reduce with the increase of slip length. The maximum sensitivity of bearing capacity is 81.94%.

  12. Magnetic bearings with zero bias

    Science.gov (United States)

    Brown, Gerald V.; Grodsinsky, Carlos M.

    1991-01-01

    A magnetic bearing operating without a bias field has supported a shaft rotating at speeds up to 12,000 rpm with the usual four power supplies and with only two. A magnetic bearing is commonly operated with a bias current equal to half of the maximum current allowable in its coils. This linearizes the relation between net force and control current and improves the force slewing rate and hence the band width. The steady bias current dissipates power, even when no force is required from the bearing. The power wasted is equal to two-thirds of the power at maximum force output. Examined here is the zero bias idea. The advantages and disadvantages are noted.

  13. History of Space Shuttle Main Engine Turbopump Bearing Testing at the Marshall Space Flight Center

    Science.gov (United States)

    Gibson, Howard; Thom, Robert; Moore, Chip; Haluck, Dave

    2010-01-01

    The Space Shuttle is propelled into orbit by two solid rocket motors and three liquid fed main engines. After the solid motors fall away, the shuttle engines continue to run for a total time of 8 minutes. These engines are fed propellants by low and high pressure turbopumps. A critical part of the turbopump is the main shaft that supports the drive turbine and the pump inducer and impeller. Rolling element bearings hold the shaft in place during rotation. If the bearings were to fail, the shaft would move, allowing components to rub in a liquid oxygen or hydrogen environment, which could have catastrophic results. These bearings are required to spin at very high speeds, support radial and axial loads, and have high wear resistance without the benefit of a conventional means of lubrication. The Rocketdyne built Shuttle turbopumps demonstrated their capability to perform during launches; however, the seven hour life requirement was not being met. One of the limiting factors was the bearings. In the late 1970's, an engineering team was formed at the Marshall Space Flight Center (MSFC), to develop a test rig and plan for testing the Shuttle s main engine high pressure oxygen turbopump (HPOTP) bearings. The goals of the program were to better understand the operation of bearings in a cryogenic environment and to further develop and refine existing computer models used to predict the operational limits of these bearings. In 1982, testing began in a rig named the Bearing and Seal Material Tester or BSMT as it was commonly called. The first testing investigated the thermal margin and thermal runaway limits of the HPOTP bearings. The test rig was later used to explore potential bearing improvements in the area of increased race curvatures, new cage materials for better lubrication, new wear resistant rolling element materials, and other ideas to improve wear life. The most notable improvements during this tester s time was the incorporation of silicon nitride balls and

  14. Solid consistency

    Science.gov (United States)

    Bordin, Lorenzo; Creminelli, Paolo; Mirbabayi, Mehrdad; Noreña, Jorge

    2017-03-01

    We argue that isotropic scalar fluctuations in solid inflation are adiabatic in the super-horizon limit. During the solid phase this adiabatic mode has peculiar features: constant energy-density slices and comoving slices do not coincide, and their curvatures, parameterized respectively by ζ and Script R, both evolve in time. The existence of this adiabatic mode implies that Maldacena's squeezed limit consistency relation holds after angular average over the long mode. The correlation functions of a long-wavelength spherical scalar mode with several short scalar or tensor modes is fixed by the scaling behavior of the correlators of short modes, independently of the solid inflation action or dynamics of reheating.

  15. Planetary Suit Hip Bearing Model for Predicting Design vs. Performance

    Science.gov (United States)

    Cowley, Matthew S.; Margerum, Sarah; Harvil, Lauren; Rajulu, Sudhakar

    2011-01-01

    Designing a planetary suit is very complex and often requires difficult trade-offs between performance, cost, mass, and system complexity. In order to verifying that new suit designs meet requirements, full prototypes must eventually be built and tested with human subjects. Using computer models early in the design phase of new hardware development can be advantageous, allowing virtual prototyping to take place. Having easily modifiable models of the suit hard sections may reduce the time it takes to make changes to the hardware designs and then to understand their impact on suit and human performance. A virtual design environment gives designers the ability to think outside the box and exhaust design possibilities before building and testing physical prototypes with human subjects. Reductions in prototyping and testing may eventually reduce development costs. This study is an attempt to develop computer models of the hard components of the suit with known physical characteristics, supplemented with human subject performance data. Objectives: The primary objective was to develop an articulating solid model of the Mark III hip bearings to be used for evaluating suit design performance of the hip joint. Methods: Solid models of a planetary prototype (Mark III) suit s hip bearings and brief section were reverse-engineered from the prototype. The performance of the models was then compared by evaluating the mobility performance differences between the nominal hardware configuration and hardware modifications. This was accomplished by gathering data from specific suited tasks. Subjects performed maximum flexion and abduction tasks while in a nominal suit bearing configuration and in three off-nominal configurations. Performance data for the hip were recorded using state-of-the-art motion capture technology. Results: The results demonstrate that solid models of planetary suit hard segments for use as a performance design tool is feasible. From a general trend perspective

  16. Ultrasonic methods in solid state physics

    CERN Document Server

    Truell, John; Elbaum, Charles

    1969-01-01

    Ultrasonic Methods in Solid State Physics is devoted to studies of energy loss and velocity of ultrasonic waves which have a bearing on present-day problems in solid-state physics. The discussion is particularly concerned with the type of investigation that can be carried out in the megacycle range of frequencies from a few megacycles to kilomegacycles; it deals almost entirely with short-duration pulse methods rather than with standing-wave methods. The book opens with a chapter on a classical treatment of wave propagation in solids. This is followed by separate chapters on methods and techni

  17. Losses of Superconductor Journal Bearing

    Science.gov (United States)

    Han, Y. H.; Hull, J. R.; Han, S. C.; Jeong, N. H.; Oh, J. M.; Sung, T. H.

    2004-06-01

    A high-temperature superconductor (HTS) journal bearing was studied for rotational loss. Two HTS bearings support the rotor at top and bottom. The rotor weight is 4 kg and the length is about 300 mm. Both the top and bottom bearings have two permanent magnet (PM) rings with an iron pole piece separating them. Each HTS journal bearing is composed of six pieces of superconductor blocks of size 35×25×10 mm. The HTS blocks are encased in a cryochamber through which liquid nitrogen flows. The inner spool of the cryochamber is made from G-10 to reduce eddy current loss, and the rest of the cryochamber is stainless steel. The magnetic field from the PM rings is < 10 mT on the stainless part. The rotational drag was measured over the same speed range at several chamber pressures. Results indicate that a chamber pressure of 0.4 mtorr is sufficiently low to minimize windage loss, and the 10 mT design criterion for the magnetic field on the stainless part of the cryochamber is too high.

  18. The correct "ball bearings" data.

    Science.gov (United States)

    Caroni, C

    2002-12-01

    The famous data on fatigue failure times of ball bearings have been quoted incorrectly from Lieblein and Zelen's original paper. The correct data include censored values, as well as non-fatigue failures that must be handled appropriately. They could be described by a mixture of Weibull distributions, corresponding to different modes of failure.

  19. Beth Starts Like Brown Bear!

    Science.gov (United States)

    Fawcett, Gay

    1994-01-01

    Recounts a reading teacher's illuminating experience with a first grader who enjoyed reading Bill Martin's "Brown Bear" books, despite being labeled as dyslexic. Dyslexia is an elusive condition that is biological in origin and distinct from other reading problems. New research shows that reading difficulties, including dyslexia, occur as part of…

  20. Development of a validated UPLC method for simultaneous estimation of both free and entrapped (in solid lipid nanoparticles) all-trans retinoic acid and cholecalciferol (vitamin D3) and its pharmacokinetic applicability in rats.

    Science.gov (United States)

    Kumar, Manoj; Sharma, Gaurav; Singla, Dinesh; Singh, Sukhjeet; Sahwney, Sudhir; Chauhan, Anurag S; Singh, Gagandeep; Kaur, Indu Pal

    2014-03-01

    A sensitive ultra-performance liquid chromatography (UPLC) method was developed for simultaneous estimation of all-trans retinoic acid (ATRA) and cholecalciferol (vitamin D3) in rat plasma. The method was validated over the linear range of 1.0-5000ng/ml (r(2)=0.999) for both vitamins with a limit of detection of 0.5ng/ml. Chromatographic separation was achieved using liquid-liquid extraction (LLE) on an Acquity BEH RP 18 column (2.1mm×50mm, I.D. 1.7μm), with mobile phase comprising of acetonitrile:methanol:water (90:8:2, v/v/v), at a flow rate of 0.20ml/min and a total run time of 5min. Intra and inter-day variability (RSD) was ≤3.1%, and the accuracy varied between 95.4-99.9% and 95.3-101.1% respectively, for ATRA and 98.5-100.8% and 99.3-101.7%, respectively for vitamin D3. High recovery of ≥96.0% for ATRA and ≥87.80% for vitamin D3 was achieved. ATRA and vitamin D3 were stable in plasma under different storage and processing conditions. The method was applied to estimate the total drug content and entrapment efficiency of ATRA and vitamin D3 loaded solid lipid nanoparticles (SLNs). Concentration of these two agents was determined in rat plasma after simultaneous subcutaneous administration in free form or when loaded into SLNs thus establishing pharmacokinetic application of the developed procedure. Results indicated an improvement in AUC0-∞ by 5.4 times and 29.4 times for ATRA and vitamin D3, respectively, upon their incorporation into SLNs. Simultaneous administration of these two vitamins and their improved and prolonged bioavailability has scope for their use in treatment and control of tuberculosis.

  1. Characterization of Fault Size in Bearings

    Science.gov (United States)

    2014-12-23

    0.3 and 1.2 mm into the outer-race of the bearing, which simulates realistic faults that often can be found in damaged bearings. A 3D dynamic model ...3 4. MODEL DESCRIPTION A 3D dynamic ball bearing model was developed to study the effect of faults on the bearing dynamic behavior. The aim of the...understanding of the effects of fault size on the bearing dynamics. The research methodology combines dynamic modeling of the faulty bearing with

  2. 新藤黄酸固体脂质纳米粒在大鼠体内药物代谢动力学研究%In Vivo Pharmacokinetics of Gambogenic Acid-Solid Lipid Nanoparticles in Rats

    Institute of Scientific and Technical Information of China (English)

    黄霞; 罗晴; 朱婷婷; 周恺; 贾步云; 程皓; 季兆洁; 林彤远; 陈卫东

    2013-01-01

    Objective To investigate the in vivo pharmacokinetic characteristics of gambogenic acid-solid lipid nanoparticles (GNA-SLNs) in rats. Methods Rats were divided into GNA group and GNA-SLN group. Both groups were intraperitoneally injected with the same amount of GNA in the form of GNA solution or GNA-SLN suspension. The concentration of GNA in plasma was measured by high-performance liquid chromatography, and the pharmacokinetic parameters were calculated by data fitting using DAS 2. 1 software. Results The plasma drug concentration-time curve of GNA-SLN group showed two peaks after administration. The peak concentration, area under the curve (AUC), and mean retention time of the GNA-SLN group were approximately 3. 06, 3, and 2 times, respectively, those of the GNA group. GNA-SLN significantly increased the internal absorbtion of GNA and extended its action time. Conclusion Compared with GNA, GNA-SLN has different pharmacokinetic characteristics, with increased plasma concentration and prolonged circulation time. GNA-SLN is expected to have an improved therapeutic effect.%目的 考察新藤黄酸固体脂质纳米粒(gambogenic acid-solid lipid nanoparticles,GNA-SLN)在大鼠体内的药物代谢动力学特征.方法 对大鼠分别腹腔注射GNA和GNA-SLN,采用高效液相色谱法测定GNA在大鼠体内的血药浓度,DAS 2.1软件拟合计算药物代谢动力学参数.结果 腹腔注射含等量GNA的GNA溶液和GNA-SLN后,GNA-SLN组的峰浓度是GNA溶液组的3.06倍,药时曲线下面积约为GNA溶液组的3倍,体内滞留时间约为GNA溶液组的2倍.GNA-SLN显著增加了GNA的体内吸收,且延长了GNA在体内的作用时间(P<0.05,或P<0.01).结论 SLN包载可改变GNA的体内行为,提高其血药浓度,延长其体内循环时间,有望改善其治疗效果.

  3. Rheology of Melt-bearing Crustal Rocks

    Science.gov (United States)

    Rosenberg, C. L.; Medvedev, S.; Handy, M. R.

    2006-12-01

    A review and reinterpretation of previous experimental data on the deformation of melt-bearing crustal rocks (Rosenberg and Handy, 2005) revealed that the relationship of aggregate strength to melt fraction is non-linear, even if plotted on a linear ordinate and abscissa. At melt fractions, Φ 0.07, the dependence of aggregate strength on Φ is significantly greater than at Φ > 0.07. This melt fraction (Φ= 0.07) marks the transition from a significant increase in the proportion of melt-bearing grain boundaries up to this point to a minor increase thereafter. Therefore, we suggest that the increase of melt-interconnectivity causes the dramatic strength drop between the solidus and a melt fraction of 0.07. A second strength drop occurs at higher melt fractions and corresponds to the breakdown of the solid (crystal) framework, corresponding to the well-known "rheologically critical melt percentage" (RCMP; Arzi, 1978). Although the strength drop at the RCMP is about 4 orders of magnitude, the absolute value of this drop is small compared to the absolute strength of the unmelted aggregate, rendering the RCMP invisible in a linear aggregate strength vs. melt fraction diagram. Predicting the rheological properties and thresholds of melt-bearing crust on the basis of the results and interpretations above is very difficult, because the rheological data base was obtained from experiments performed at undrained conditions in the brittle field. These conditions are unlikely to represent the flow of partially melted crust. The measured strength of most of the experimentally deformed, partially-melted samples corresponds to their maximum differential stress, before the onset of brittle failure, not to their viscous strength during "ductile" (viscous) flow. To overcome these problems, we extrapolated a theoretically-derived flow law for partially melted granite deforming by diffusion-accommodated grain-boundary sliding (Paterson, 2001) and an experimentally-derived flow law for

  4. Journal and Wave Bearing Impedance Calculation Software

    Science.gov (United States)

    Hanford, Amanda; Campbell, Robert

    2012-01-01

    The wave bearing software suite is a MALTA application that computes bearing properties for user-specified wave bearing conditions, as well as plain journal bearings. Wave bearings are fluid film journal bearings with multi-lobed wave patterns around the circumference of the bearing surface. In this software suite, the dynamic coefficients are outputted in a way for easy implementation in a finite element model used in rotor dynamics analysis. The software has a graphical user interface (GUI) for inputting bearing geometry parameters, and uses MATLAB s structure interface for ease of interpreting data. This innovation was developed to provide the stiffness and damping components of wave bearing impedances. The computational method for computing bearing coefficients was originally designed for plain journal bearings and tilting pad bearings. Modifications to include a wave bearing profile consisted of changing the film thickness profile given by an equation, and writing an algorithm to locate the integration limits for each fluid region. Careful consideration was needed to implement the correct integration limits while computing the dynamic coefficients, depending on the form of the input/output variables specified in the algorithm.

  5. Study on pharmacokinetics of icariin loaded solid lipid nanoparticles in rats%淫羊藿苷固体脂质纳米粒的大鼠体内药动学研究

    Institute of Scientific and Technical Information of China (English)

    刘丛丛; 张琦; 孙学惠; 郭涛

    2013-01-01

    目的:考察淫羊藿苷固体脂质纳米粒(ICA-SLN)在大鼠体内的药动学行为,以及利用固体脂质纳米粒技术提高ICA口服生物利用度的可行性。方法:对2组大鼠分别灌胃ICA混悬液和ICA-SLN混悬液后,采用HPLC-MS/MS法测定大鼠体内ICA的血药浓度,比较ICA混悬液和ICA-SLN混悬液在大鼠体内的吸收情况。结果:ICA在体内的药-时曲线呈现双峰, tmax为1 h,t1/2为3 h。载药纳米粒组与对照组的AUC0-∞分别为(233.6±71.2)ng· h· mL-1和(107.4±15.7)ng· h· mL-1(P<0.05)。结论:与单纯口服ICA相比较,ICA-SLN在大鼠体内的生物利用度更高。%Objective:To investigate the pharmacokinetics of icariin (ICA) loaded solid lipid nanoparticles (ICA-SLN) in rats and to evaluate the feasibility of improving ICA's oral bioavailability. Methods: Using HPLC-MS/MS to determine the concentration of ICA in rats after oral administration of ICA suspension and ICA-SLN respectively, the pharmacokinetic parameters of two goups were calculated by DAS 2.0 software. Results:There were two peaks in drug concentration-time profile of ICA, tmax was 1 h, t1/2 was 3 h. AUC0-∞of oral ICA-SLN groups and ICA groups were (233.6 ± 71.2) ng· h· mL-1, (107.4 ± 15.7)ng· h· mL-1 respectively (P<0.05). Conclusion:Compared with ICA, ICA-SLN is a promising delivery system to enhance the bioavailability of ICA in rats.

  6. Preparation and Rat Intestinal Absorption of Baicalin Solid Lipid Nanoparticles%黄芩苷固体脂质纳米粒的制备及大鼠在体肠吸收研究

    Institute of Scientific and Technical Information of China (English)

    李金明; 林东海; 李延团

    2011-01-01

    选用硬脂酸、单硬脂酸甘油酯混合脂质作为载体,以卵磷脂作为乳化剂制备黄芩苷固体脂质纳米粒(BC-SLN),并考察其大鼠在体肠吸收特性.采用热匀质法(hot homogenization technique,HHT)制备BC-SLN,采用循环灌注技术评价黄芩苷固体脂质纳米粒和黄芩苷溶液大鼠在体肠吸收特性.制得的BC-SLN平均粒径为(150.8±47.2)nm,zeta电位为(-39.85±0.86) mV,载药量为(4.86±0.37)%,包封率为(88.52±0.32)%,大鼠在体肠吸收实验表明,BC-SLN与黄芩苷溶液相比,吸收速率常数Ka和每小时吸收百分率p均呈增加趋势,有显著性差异(P<0.05),黄芩苷固体脂质纳米粒能够促进黄芩苷大鼠肠吸收.%Baicalin solid lipid nanoparticles ( BC-SLN) are prepared with a mixture of stearic acid and monos-tearin by hot homogenization technique. The mean diameter of BC-SLN is ( 150. 8 ±47. 2) nm. The zeta potential of BC-SLN is ( - 39. 85 ±0. 86) mV. The drug loading and entrapment efficiency are (4. 86 ± 0. 37)% and (88.52 ±0. 32)%,respectively. The absorption parameters of BC-SLN and baicalin solution in rat intestines are characterized by using recirculating perfusion technique. The Ka and p of BC-SLN in rat intestines are remarkably higher than those of the baicalin solution ( P <0. 05 ). The absorption of BC-SLN in rat intestines is improved significantly compared with the reference baicalin solution.

  7. Disseminated pleomorphic myofibrosarcoma in a grizzly bear (Ursus arctos horribilis).

    Science.gov (United States)

    Mete, A; Woods, L; Famini, D; Anderson, M

    2012-01-01

    The pathological and diagnostic features of a widely disseminated pleomorphic high-grade myofibroblastic sarcoma are described in a 23-year-old male brown bear (Ursus arctos horribilis). Firm, solid, white to tan neoplastic nodules, often with cavitated or soft grey-red necrotic centres, were observed throughout most internal organs, subcutaneous tissues and skeletal muscles on gross examination. Microscopically, the tumour consisted of pleomorphic spindle cells forming interlacing fascicles with a focal storiform pattern with large numbers of bizarre polygonal multinucleate cells, frequently within a collagenous stroma. Immunohistochemistry, Masson's trichrome stain and transmission electron microscopy designated the myofibroblast as the cell of origin. This is the first case of a high-grade myofibrosarcoma in a grizzly bear.

  8. Operating procedures, Pilot polar bear survey

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Distance will be measured from the "center" of the sighting (polar bear, group of bears, group of walrus, etc.) to the flight line along a perpendicular projection...

  9. Rolling Element Bearing Stiffness Matrix Determination (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Y.; Parker, R.

    2014-01-01

    Current theoretical bearing models differ in their stiffness estimates because of different model assumptions. In this study, a finite element/contact mechanics model is developed for rolling element bearings with the focus of obtaining accurate bearing stiffness for a wide range of bearing types and parameters. A combined surface integral and finite element method is used to solve for the contact mechanics between the rolling elements and races. This model captures the time-dependent characteristics of the bearing contact due to the orbital motion of the rolling elements. A numerical method is developed to determine the full bearing stiffness matrix corresponding to two radial, one axial, and two angular coordinates; the rotation about the shaft axis is free by design. This proposed stiffness determination method is validated against experiments in the literature and compared to existing analytical models and widely used advanced computational methods. The fully-populated stiffness matrix demonstrates the coupling between bearing radial, axial, and tilting bearing deflections.

  10. Live-trapping and handling brown bear

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — In recent years bears have become increasingly important as big game animals. The brown bears (Ursus middendorfi) on the Kodiak National Wildlife Refuge, Kodiak...

  11. Live-trapping and handling brown bear

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This paper reports techniques developed to live trap and handle brown bears on the Kodiak National Wildlife Refuge. The brown bears (Ursus middendorffi) on the...

  12. Goose Eggs Could Save Polar Bears

    Institute of Scientific and Technical Information of China (English)

    孙淑敏

    2009-01-01

    Polar bears could avoid extinction despitemany starving to death in coming years, ac-cording to scientists and other observers whohave discovered that some of the bears havefound a new food source--goose and duckeggs.

  13. Brown bear telemetry and trapping: Special report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Brown bear studies were continued during the 1967 field season with emphasis on development of techniques for instrumenting bears with radio transmitters and...

  14. Stable isotopes to detect food-conditioned bears and to evaluate human-bear management

    Science.gov (United States)

    Hopkins, John B.; Koch, Paul L.; Schwartz, Charles C.; Ferguson, Jake M.; Greenleaf, Schuyler S.; Kalinowski, Steven T.

    2012-01-01

    We used genetic and stable isotope analysis of hair from free-ranging black bears (Ursus americanus) in Yosemite National Park, California, USA to: 1) identify bears that consume human food, 2) estimate the diets of these bears, and 3) evaluate the Yosemite human–bear management program. Specifically, we analyzed the isotopic composition of hair from bears known a priori to be food-conditioned or non-food-conditioned and used these data to predict whether bears with an unknown management status were food-conditioned (FC) or non-food-conditioned (NFC). We used a stable isotope mixing model to estimate the proportional contribution of natural foods (plants and animals) versus human food in the diets of FC bears. We then used results from both analyses to evaluate proactive (population-level) and reactive (individual-level) human–bear management, and discussed new metrics to evaluate the overall human–bear management program in Yosemite. Our results indicated that 19 out of 145 (13%) unknown bears sampled from 2005 to 2007 were food-conditioned. The proportion of human food in the diets of known FC bears likely declined from 2001–2003 to 2005–2007, suggesting proactive management was successful in reducing the amount of human food available to bears. In contrast, reactive management was not successful in changing the management status of known FC bears to NFC bears, or in reducing the contribution of human food to the diets of FC bears. Nine known FC bears were recaptured on 14 occasions from 2001 to 2007; all bears were classified as FC during subsequent recaptures, and human–bear management did not reduce the amount of human food in the diets of FC bears. Based on our results, we suggest Yosemite continue implementing proactive human–bear management, reevaluate reactive management, and consider removing problem bears (those involved in repeated bear incidents) from the population.

  15. Grease lubrication mechanisms in bearing seals

    OpenAIRE

    2011-01-01

    Rolling bearings contain seals to keep lubricant inside and contaminants outside the bearing system. These systems are often lubricated with grease; the grease acts as a lubricant for the bearing and seal and improves the sealing efficiency. In this thesis, the influence of lubricating grease on bearing seal performance is studied. Rheological properties of the grease, i.e. shear stress and normal stress difference, are evaluated and related to the lubricating and sealing performance of the s...

  16. Thin film superconductor magnetic bearings

    Science.gov (United States)

    Weinberger, Bernard R.

    1995-12-26

    A superconductor magnetic bearing includes a shaft (10) that is subject to a load (L) and rotatable around an axis of rotation, a magnet (12) mounted to the shaft, and a stator (14) in proximity to the shaft. The stator (14) has a superconductor thin film assembly (16) positioned to interact with the magnet (12) to produce a levitation force on the shaft (10) that supports the load (L). The thin film assembly (16) includes at least two superconductor thin films (18) and at least one substrate (20). Each thin film (18) is positioned on a substrate (20) and all the thin films are positioned such that an applied magnetic field from the magnet (12) passes through all the thin films. A similar bearing in which the thin film assembly (16) is mounted on the shaft (10) and the magnet (12) is part of the stator (14) also can be constructed.

  17. 维拉帕米联合5-氟脲嘧啶腹腔内化疗对荷肝癌大鼠的抗肿瘤作用%Antineoplastic Effect of Calcium Channel Blocker-Verapamil and 5-Fluorouracil Intraperitoneal Chemotherapy on Hepatocarcinoma-Bearing Rats

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Department of General Surgery, Huadu District People's Hospital, Guangzhou 510800, ChinaObjective To study the antineoplastic effect of the calcium channel blocker verapamil and 5-fluorouracil intraperitoneal chemotherapy on hepatocarcinoma-bearing rats, and examine the action between calcium channel blockers and cytotoxic drugs.Methods We adopted the method of subcapsular implantation of carcinoma tissues of walker-256 in the left liver lobe as a model of liver carcinoma-bearing rats. All experimental animals were divided into four groups. On the sixth day post implantation, in group A (control group) 6 ml of saline was injected intraperitoneally once a day for 3 days. In group B (single chemotherapy group) 6 ml of 5-Fu 75 mg/kg was injected intraperitoneally once a day for 3 days. In group C (combination of treatment group) both 5-Fu (75 mg/kg) and verapamil (25 mg/kg) were administered simultaneously as in A and B. In group D (simple verapamil group) only 6 ml of verapamil (25 mg/kg) was administered as above.Results Compared with groups A, B and D, The volume of cancer and the contents of liver cancer DNA and protein were significantly reduced. The rates of inhibiting cancer (89.9% in group C and 35.4% in group B) were significantly increased in group C. Group C had significantly long survival time compared to groups A, B and D (P<0.05). By light microscopy, a number of focal necroses were found in cancer tissue in group C.Conclusion Calcium channel blockers can enhance the antineoplastic effect of 5-Fu intraperitoneal chemotherapy to liver cancer ; The use of verapamil can not increase the toxicity of 5-Fu.%目的 探讨钙拮抗剂与腹腔内化疗联合应用对荷肝癌大鼠的作用及 钙拮抗剂与细胞毒药物的相互作用。方法 采用肝被膜下植入法建立肝癌动物模型,将荷瘤大鼠分成四 组:A组(对照组),腹腔内注射6ml生理盐水,每天1次,连续3天;B组(单纯化疗组),腹腔内注射5Fu

  18. Bearing-Mounting Concept Accommodates Thermal Expansion

    Science.gov (United States)

    Nespodzany, Robert; Davis, Toren S.

    1995-01-01

    Pins or splines allow radial expansion without slippage. Design concept for mounting rotary bearing accommodates differential thermal expansion between bearing and any structure(s) to which bearing connected. Prevents buildup of thermal stresses by allowing thermal expansion to occur freely but accommodating expansion in such way not to introduce looseness. Pin-in-slot configuration also maintains concentricity.

  19. Fractal analysis of polar bear hairs

    Directory of Open Access Journals (Sweden)

    Wang Qing-Li

    2015-01-01

    Full Text Available Hairs of a polar bear (Ursus maritimus are of superior properties such as the excellent thermal protection. Why do polar bears can resist such cold environment? The paper concludes that its fractal porosity plays an important role, and its fractal dimensions are very close to the golden mean, 1.618, revealing the possible optimal structure of polar bear hair.

  20. Cryptosporidiosis in a black bear in Virginia.

    Science.gov (United States)

    Duncan, R B; Caudell, D; Lindsay, D S; Moll, H D

    1999-04-01

    Cryptosporidiosis has not been previously reported in black bears in North America, either free-roaming or captive. However, oocysts have been documented in two captive Malayan sun bears (Helarctos malayanus) located in zoological parks in Taiwan. Developmental stages of Cryptosporidium parvum were observed in tissue sections from the small intestine of a black bear cub found dead in Virginia (USA).

  1. Fault Tolerant Homopolar Magnetic Bearings

    Science.gov (United States)

    Li, Ming-Hsiu; Palazzolo, Alan; Kenny, Andrew; Provenza, Andrew; Beach, Raymond; Kascak, Albert

    2003-01-01

    Magnetic suspensions (MS) satisfy the long life and low loss conditions demanded by satellite and ISS based flywheels used for Energy Storage and Attitude Control (ACESE) service. This paper summarizes the development of a novel MS that improves reliability via fault tolerant operation. Specifically, flux coupling between poles of a homopolar magnetic bearing is shown to deliver desired forces even after termination of coil currents to a subset of failed poles . Linear, coordinate decoupled force-voltage relations are also maintained before and after failure by bias linearization. Current distribution matrices (CDM) which adjust the currents and fluxes following a pole set failure are determined for many faulted pole combinations. The CDM s and the system responses are obtained utilizing 1D magnetic circuit models with fringe and leakage factors derived from detailed, 3D, finite element field models. Reliability results are presented vs. detection/correction delay time and individual power amplifier reliability for 4, 6, and 7 pole configurations. Reliability is shown for two success criteria, i.e. (a) no catcher bearing contact following pole failures and (b) re-levitation off of the catcher bearings following pole failures. An advantage of the method presented over other redundant operation approaches is a significantly reduced requirement for backup hardware such as additional actuators or power amplifiers.

  2. Magnetic Titanohematite Minerals in Uranium-Bearing Sandstones

    Science.gov (United States)

    Reynolds, Richard L.

    1977-01-01

    Detrital grains of the rhombohedral ilmenite (FeT1O3)--hematite (Fe2O3) solid solution series (titanohematites) have been identified by thermomagnetic, reflection microscopic, and X-ray diffraction analysis in six uranium-bearing sandstones in the western United States. Many of the titanohematites are ferrimagnetic and have Curie temperatures ranging from about 70 Deg C to 220 Deg C. Magnetic titanohematite is commonly more abundant than magnetite in many samples and, therefore, should be considered as a major source of the permanent magnetization in these units.

  3. The Effect of Additives on The Performance of HydrostaticThrust Bearings

    Directory of Open Access Journals (Sweden)

    Muhammed Abdul Sattar

    2008-01-01

    Full Text Available The paper is concerned with, the behavior of the hydrostatic thrust bearings lubricated with liquid-solid lubricants using Einstein viscosity formula, and taking into account the centrifugal force resulting from high speed. Also studied is the effect of the bearing dimensions on the pressure, flow rate, load capacity, shear stress, power consumption and stiffness. The theoretical results show an increase in load capacity by (8.3% in the presence of solid graphite particles with concentration of (16% by weight as compared with pure oil, with increasing shear stress. . In general the performance of hydrostatic thrust bearings improve for load carrying capacity, volume flow rate, pumping power subjected to centrifugal parameter (S, recess position (r1, film thickness ratio (, particle concentration (.

  4. Ball Bearing Stacking Automation System

    Directory of Open Access Journals (Sweden)

    Shafeequerrahman S . Ahmed

    2013-01-01

    Full Text Available This document is an effort to introduce the concept of automation in small scale industries and or small workshops that are involved in the manufacturing of small objects such as nuts, bolts and ball bearing in this case. This an electromechanical system which includes certain mechanical parts that involves one base stand on which one vertical metallic frame is mounted and hinged to this vertical stand is an in humanized effort seems inadequate in this era making necessary the use of Electronics, Computer in the manufacturing processes leading to the concept of Automated Manufacturing System (AMS.The ball bearing stack automation is an effort in this regard. In our project we go for stack automation for any object for example a ball bearing, be that is still a manual system there. It will be microcontroller based project control system equipped with microcontroller 89C51 from any manufacturer like Atmel or Philips. This could have been easily implemented if a PLC could be used for manufacturing the staking unit but I adopted the microcontroller based system so that some more modification in the system can be effected at will as to use the same hardware .Although a very small object i.e. ball bearig or small nut and fixture will be tried to be stacked, the system with more precision and more power handling capacity could be built for various requirements of the industry. For increasing more control capacity, we can use another module of this series. When the bearing is ready, it will be sent for packing. This is sensed by an inductive sensor. The output will be proceeds by PLC and microcontroller card which will be driving the assembly in order to put it into pads or flaps. This project will also count the total number of bearings to be packed and will display it on a LCD for real time reference and a provision is made using a higher level language using hyper terminal of the computer

  5. Cannibalism and predation on black bears by grizzly bears in the Yellowstone ecosystem, 1975-1990

    Science.gov (United States)

    Mattson, D.J.; Knight, R.R.; Blanchard, B.M.

    1992-01-01

    We documented one instance of an adult male grizzly bear preying upon a black bear and four instances where circumstantial evidence suggested that grizzly bears (two cubs-of-the-year, one yearling female that was injured, and one adult male) had been preyed upon by conspecifics. We also examined feces of grizzly bears for bear remains. Remains of bears tended to be more common in spring feces and did not differ in frequency between early and late years of the study. Our observations generally support existing hypotheses concerning cannibalism among bears.

  6. Improvement of journal bearing operation at heavy misalignment using bearing flexibility and compliant liners

    DEFF Research Database (Denmark)

    Thomsen, Kim; Klit, Peder

    2012-01-01

    A flexure journal bearing design is proposed that will improve operational behaviour of a journal bearing at pronounced misalignment. Using a thermoelastohydrodynamic model, it is shown that the proposed flexure journal bearing has vastly increased the hydrodynamic performance compared to the stiff...... bearing when misaligned. The hydrodynamic performance is evaluated on lubricant film thickness, pressure and temperature. Furthermore, the influence of a compliant bearing liner is investigated and it is found that it increases the hydrodynamic performance when applied to a stiff bearing, whereas...... the liner has practically no influence on the flexure journal bearing's performance....

  7. Automated Assistance for Designing Active Magnetic Bearings

    Science.gov (United States)

    Imlach, Joseph

    2008-01-01

    MagBear12 is a computer code that assists in the design of radial, heteropolar active magnetic bearings (AMBs). MagBear12 was developed to help in designing the system described in "Advanced Active-Magnetic-Bearing Thrust-Measurement System". Beyond this initial application, MagBear12 is expected to be useful for designing AMBs for a variety of rotating machinery. This program incorporates design rules and governing equations that are also implemented in other, proprietary design software used by AMB manufacturers. In addition, this program incorporates an advanced unpublished fringing-magnetic-field model that increases accuracy beyond that offered by the other AMB-design software.

  8. Shaft Center Orbit in Dynamically Loaded Bearings

    DEFF Research Database (Denmark)

    Klit, Peder

    The aim of this work is to demonstrate how to utilize the bearings damping coefficients to estimate the orbit for a dynamically loaded journal bearing. The classical method for this analysis was developed by Booker in 1965 and described further in 1972. Several authors have refined this method over...... Jorgen W. Lund pointed out in lecture notes that the dynamic damping coefficients of the bearing could be used to find the shaft orbit for dynamically loaded bearings. For simplicity the "Short-Width-Journal-Bearing Theory" is used as a basis for finding the damping coefficients in this work...

  9. Chromatographic (TLC) differentiation of grizzly bear and black bear scats

    Science.gov (United States)

    Picton, Harold D.; Kendall, Katherine C.

    1994-01-01

    While past work concluded that thin-layer chromatography (TLC) was inadequate for the separation of grizzly (Ursus arctos horribilis) and black bear (U. americanus) scats, our study found differences adequate for species separation. A key was constructed using 19 of 40 data points recorded on each(N)=356 profiles of 178) know-species scat. Accuracy was best for late summer scats (94%). Methods for specimen preparation, analysis, and reading the TLC profiles are discussed. Factors involved in scat variation were tested.

  10. Pratt and Whitney cryogenic turbopump bearing experience

    Science.gov (United States)

    Poole, W. E.; Bursey, R. W., Jr.

    1988-01-01

    Successful, reusable bearings require lubrication, traditionally, a transfer film from sacrificial cage wear. Early testing included materials screening programs to identify suitable cryogenic cage materials. A specially developed element tester that simulated the function of a ball bearing cage was used. Suitable materials must provide lubrication with an acceptably low wear rate, without abrading contacting surfaces. The most promising materials were tested in full scale bearings at speeds up to 4 MDN. Teflon, filled with 40 percent bronze powder, was the best performing material. A variety of bearings were designed and successfully tested in LH2 and LOX. Bearings with bronze filled Teflon cages were successfully tested for 150 hrs. In overload tests, the same design was tested for 5 hrs at maximum Hertz stresses above 450 ksi and an additional 5 hrs with a maximum Hertz stress exceeding 500 ksi. Four bearings were tested in LOX for 25 hrs, with a maximum time per bearing of 10 hrs.

  11. Finite Element Harmonic Solution of the Coupled Rotor-bearing System

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Fluid-solid interaction problems have been studied q uite extensively in the past years. Rotor-bearing system is a typical example. Fluid field is changed under the exciting of rotor vibration. On the same ti me, a net force caused by fluid pressure exerts on rotor, which will change roto r vibration. So, the fluid-solid coupled analysis method must be used. Traditionally, numerical difference method was used to solve fluid problems. The coupled fluid-solid equation could not be set up based on the me...

  12. 模拟失重对大鼠承重骨骨髓基质细胞数量及体外成骨能力的影响%Effects of simulated weightlessness on bone marrow stromal cell count and osteogentic capacity of weight bearing bone in rats

    Institute of Scientific and Technical Information of China (English)

    付崇建; 郁冰冰; 杨连甲; 曹新生; 张立藩

    2007-01-01

    of simulated weightlessness on bone marrow stromal cell count and osteogentic capacity of weight bearing bone in rats so as to reveal the mechanism of bone loss.DESIGN : Randomized pairing and controlled study.SETTING: College of Aerospace Medicine and Department of Pathology of Stomatology College, the Fourth Military Medical University of Chinese PLA.MATERIALS: A total of 20 adult healthy male SD rats were selected in this study. At the beginning of experiment, rats based on their body mass were randomly divided into control group and suspension group with 10 in each group. Alkaline phosphatase kit was provided by Beijing Zhongsheng Bioengineering High-technological Company.METHODS: The experiment was carried out in the Department of Pathology, Collage of Stomatology, the Fourth Military Medical University of Chinese PLA from November 1999 to July 2000. Rats were randomly divided into tail suspension group and control group with 10 in each group. Rats in the tail suspension group were given tail suspension for 28 days. Their heads maintained 30° low position, and their hindlimbs freely suspended and were not given weight loading. While, rats in the control group were fed normally. At the end of experiment, bone marrow stromal cells were obtained from femur for primary and transferring cultures.MAIN OUTCOME MEASURES: Cell counting and methylthianolyldiphenyl-tetrazolium bromide (MTT) assay were used to draw growth curve of cells in primary and transferring cultures and to measure activity of alkaline phosphatase and forming quantity of mineralized nodules in vitro.RESULTS : ① Activity of alkaline phosphatase: Activity of alkaline phosphatase of cells in the primary and transferring cultures in the suspension group was lower than that in the control group, and there was significant difference between them (P<0.05). ② Forming quantity of mineralized nodules: Forming quantity of mineralized nodules in the suspension group was less than that in the control group

  13. Current leads and magnetic bearings

    Science.gov (United States)

    Hull, J. R.

    1993-10-01

    Since the discovery of high temperature superconductors (HTS's), Argonne National Laboratory (ANL) has been active in a broad spectrum of activities in developing these materials for applications. Work at every stage of development has involved industrial collaboration in order to accelerate commercialization. While most of the development work has been devoted to improving the properties of current-carrying wires, some effort has been devoted to applications that can utilize HTS's with properties available now or in the near future. In this paper, advances made in the area of current leads and magnetic bearings are discussed.

  14. Transformation plasticity in boron-bearing low carbon steel

    Science.gov (United States)

    Jeong, Hye-Jin; Kim, Moon-Jo; Kim, Dong-Wan; Suh, Dong-Woo; Oh, Jin-Keun; Han, Heung Nam

    2015-09-01

    The transformation plasticity (TP), which indicates that permanent strain remains after solid-solid phase transformation, even under much smaller stress than the yield stress, has been described by a vacancy diffusion mechanism in the migrating interface during diffusional phase transformation. In this study, the influence of boron (B) addition on the TP of low carbon high strength steel was investigated through the observation of the B segregation in the phase interface between primary austenite phase and ferrite phase using secondary ion mass spectroscopy. The B segregation at the austenite-ferrite phase interface was confirmed to cause drastic decrease of the TP strain by comparison of the dilatation behavior of B-bearing and B-free steels under a tensile force during slow cooling, where the diffusional phase transformation occurs in B-bearing steel. Furthermore, it was also confirmed that the velocity of B diffusion is larger than the migration velocity of interface at the given temperature through a calculation based on Fick's law.

  15. Graphene quantum dots as the electrolyte for solid state supercapacitors

    Science.gov (United States)

    Zhang, Su; Li, Yutong; Song, Huaihe; Chen, Xiaohong; Zhou, Jisheng; Hong, Song; Huang, Minglu

    2016-01-01

    We propose that graphene quantum dots (GQDs) with a sufficient number of acidic oxygen-bearing functional groups such as -COOH and -OH can serve as solution- and solid- type electrolytes for supercapacitors. Moreover, we found that the ionic conductivity and ion-donating ability of the GQDs could be markedly improved by simply neutralizing their acidic functional groups by using KOH. These neutralized GQDs as the solution- or solid-type electrolytes greatly enhanced the capacitive performance and rate capability of the supercapacitors. The reason for the enhancement can be ascribed to the fully ionization of the weak acidic oxygen-bearing functional groups after neutralization.

  16. Investigations of Slip Effect on the Performance of Micro Gas Bearings and Stability of Micro Rotor-Bearing Systems

    Directory of Open Access Journals (Sweden)

    Jieyu Chen

    2007-08-01

    Full Text Available Incorporating the velocity slip effect of the gas flow at the solid boundary, theperformance and dynamic response of a micro gas-bearing-rotor system are investigated inthis paper. For the characteristic length scale of the micro gas bearing, the gas flow in thebearing resides in the slip regime rather than in the continuum regime. The modifiedReynolds equations of different slip models are presented. Gas pressure distribution and loadcarrying capacity are obtained by solving the Reynolds equations with finite differentmethod (FDM. Comparing results from different models, it is found that the second orderslip model agrees reasonably well with the benchmarked solutions obtained from thelinearized Boltzmann equation. Therefore, dynamic coefficients derived from the secondorder slip model are employed to evaluate the linear dynamic stability and vibrationcharacteristics of the system. Compared with the continuum flow model, the slip effectreduces dynamic coefficients of the micro gas bearing, and the threshold speed for stableoperation is consequently raised. Also, dynamic analysis shows that the system responseschange with variation of the operating parameters including the eccentricity ratio, therotational speed, and the unbalance ratio.

  17. Bearing Health Assessment Based on Chaotic Characteristics

    Directory of Open Access Journals (Sweden)

    Chen Lu

    2013-01-01

    Full Text Available Vibration signals extracted from rotating parts of machinery carry a lot of useful information about the condition of operating machine. Due to the strong non-linear, complex and non-stationary characteristics of vibration signals from working bearings, an accurate and reliable health assessment method for bearing is necessary. This paper proposes to utilize the selected chaotic characteristics of vibration signal for health assessment of a bearing by using self-organizing map (SOM. Both Grassberger-Procaccia algorithm and Takens' theory are employed to calculate the characteristic vector which includes three chaotic characteristics, such as correlation dimension, largest Lyapunov exponent and Kolmogorov entropy. After that, SOM is used to map the three corresponding characteristics into a confidence value (CV which represents the health state of the bearing. Finally, a case study based on vibration datasets of a group of testing bearings was conducted to demonstrate that the proposed method can reliably assess the health state of bearing.

  18. Powder-Metallurgical Bearings For Turbopumps

    Science.gov (United States)

    Bhat, B. N.; Humphries, T. S.; Thom, R. L.; Moxson, V.; Friedman, G. I.; Dolan, F. J.; Shipley, R. J.

    1993-01-01

    Bearings fabricated by powder metallurgy developed for use in machines subjected to extremes of temperature, rolling-contact cyclic stresses, and oxidizing or otherwise corrosive fluids. Bearings also extend operating lives of other machines in which bearings required to resist extreme thermal, mechanical, and chemical stresses. One alloy exhibiting outstanding properties was MRC-2001. Resistance to fatigue, stress corrosion cracking, and wear found superior to that of 440C stainless steel.

  19. Electromechanical properties of radial active magnetic bearings

    OpenAIRE

    Antila, Matti

    1998-01-01

    Nonideal properties of the electromagnetic actuators in radial active magnetic bearings are studied. The two dimensional nonlinear stationary finite element method is used to determine the linearised parameters of a radial active magnetic bearing. The method is verified on two test machines. The accuracy is 10-15 % in the magnetic saturation region. The effect of magnetic saturation on the bearing dynamics is studied based on the root locus diagrams of the closed loop system. These diagrams s...

  20. Are organohalogen contaminants a bears (Ursus maritimus)?

    DEFF Research Database (Denmark)

    Sonne, Christian; Dietz, Rune; Leifsson, PS

    2006-01-01

    Tissues of polar bears (Ursus maritimus) from East Greenland contain the highest concentrations of organohalogen contaminants (OHCs) among subpopulations of any mammalian species in the Arctic. Negative associations also have been found between OHC concentrations and bone mineral density and liver...... histology parameters for this subpopulation of polar bears. The present study examined the OHC concentrations and adverse effects on renal tissue for 75 polar bears collected during 1999 to 2002. Specific lesions were diffuse glomerular capillary wall thickening, mesangial glomerular deposits, tubular...

  1. Sequential radioimmunotherapy with 177Lu- and 211At-labeled monoclonal antibody BR96 in a syngeneic rat colon carcinoma model

    DEFF Research Database (Denmark)

    Eriksson, Sophie E; Elgström, Erika; Bäck, Tom

    2014-01-01

    for small, established tumors. A combination of such radionuclides may be successful in regimens of radioimmunotherapy. In this study, rats were treated by sequential administration of first a 177Lu-labeled antibody, followed by a 211At-labeled antibody 25 days later. METHODS: Rats bearing solid colon...... carcinoma tumors were treated with 400 MBq/kg body weight 177Lu-BR96. After 25 days, three groups of animals were given either 5 or 10 MBq/kg body weight of 211At-BR96 simultaneously with or without a blocking agent reducing halogen uptake in normal tissues. Control animals were not given any 211At-BR96....... Myelotoxicity, body weight, tumor size, and development of metastases were monitored for 120 days. RESULTS: Tumors were undetectable in 90% of the animals on day 25, independent of treatment. Additional treatment with 211At-labeled antibodies did not reduce the proportion of animals developing metastases...

  2. Axial force calculation of passive magnetic bearing

    National Research Council Canada - National Science Library

    Vučković Ana N; Raičević Nebojša B; Ilić Saša S; Aleksić Slavoljub R; Perić Mirjana T

    2014-01-01

    .... Configuration like this one resembles the one passive magnetic bearing has. Force calculation is performed using semi analytical approach based on fictitious magnetization charges and discretization technique...

  3. Permanent Magnetic Bearing for Spacecraft Applications

    Science.gov (United States)

    Morales, Winfredo; Fusaro, Robert; Kascak, Albert

    2008-01-01

    A permanent, totally passive magnetic bearing rig was designed, constructed, and tested. The suspension of the rotor was provided by two sets of radial permanent magnetic bearings operating in the repulsive mode. The axial support was provided by jewel bearings on both ends of the rotor. The rig was successfully operated to speeds of 5500 rpm using an air impeller. Radial and axial stiffnesses of the permanent magnetic bearings were experimentally measured and then compared to finite element results. The natural damping of the rotor was measured and a damping coefficient was calculated.

  4. Gearbox Reliability Collaborative Bearing Calibration

    Energy Technology Data Exchange (ETDEWEB)

    van Dam, J.

    2011-10-01

    NREL has initiated the Gearbox Reliability Collaborative (GRC) to investigate the root cause of the low wind turbine gearbox reliability. The GRC follows a multi-pronged approach based on a collaborative of manufacturers, owners, researchers and consultants. The project combines analysis, field testing, dynamometer testing, condition monitoring, and the development and population of a gearbox failure database. At the core of the project are two 750kW gearboxes that have been redesigned and rebuilt so that they are representative of the multi-megawatt gearbox topology currently used in the industry. These gearboxes are heavily instrumented and are tested in the field and on the dynamometer. This report discusses the bearing calibrations of the gearboxes.

  5. 高强度聚焦超声消融神经母细胞瘤荷瘤SD幼鼠模型对骨骼生长发育的影响%Effect of high intensity focused ultrasound ablation on skeletal growth in infant Sprague-Dawley rats bearing human neuroblastoma

    Institute of Scientific and Technical Information of China (English)

    刘苗; 王珊; 向娟; 白洁; 朱辉

    2014-01-01

    Objective To explore the effects of high intensity focused ultrasound (HIFU) ablation on skeletal growth in infant rats bearing human neuroblastoma.Methods A total of 135 healthy 4-week-old male Sprague-Dawley (SD) rats were divided randomly into normal control group (A),HIFU group (B) and surgery group (C) (n =45 each).Human neuroblastoma SK-N-SH cells were inoculated into renal fascia of left adrenal gland for constructing a tumor-bearing rat model in HIFU and surgery groups.The rats of HIFU group received HIFU with a power of 70-90 W at Days 7-9 post-inoculation (tumor diameter 1.0-1.5 cm).While those of normal control and surgery groups were untreated.The data of length,skeletal malformations under macroscopic observation and radiography were recorded at study entry and after 3 days,2 weeks and 4 weeks in all groups.The serum level of bone alkaline phosphatase (BALP) was measured by enzyme-linked immunosorbent assay (ELISA)and histopathological examinations of spine and ribs around HIFU radiation zone were made with hematoxylin & eosin stain.Results No obvious macroscopic and radiographic malformations were found at study entry and different stages after HIFU.The height growth at day 3 in HIFU group [(0.900 ± 0.338) cm] was significantly lower than that in control group [(1.497 ± 0.362) cm] and surgery group [(1.243 ± 0.378) cm](P<0.05).At week 2,it was also lower in HIFU group (2.500 ± 0.445) cm than control group (3.633 ± 0.434) cm and surgery group [(3.333 ± 0.372) cm] (P< 0.05).However,no difference existed among HIFU group [(2.533 ± 0.543)cm],control group [(2.900 ± 0.541) cm] and surgery group [(2.633 ± 0.696) cm] at Week 4 (P> 0.05).The serum concentration of BALP decreased after HIFU treatment 3 days in HIFU group [(951.697 ± 251.618)pg/ml] than that in control group [(1 168.847 ± 121.638) pg/ml] and surgery group [(1 088.359 ± 176.919) pg/ml](P<0.05).Significant statistical differences existed when HIFU group [(1 037.507 ± 297

  6. Evaluation of bearing configurations using the single bearing tester in liquid nitrogen

    Science.gov (United States)

    Jett, T.; Hall, P.; Thom, R.

    1991-01-01

    Various bearing configurations were tested using the Marshall Space Flight Center single bearing tester with LN2 as the cryogenic coolant. The baseline was one Rocketdyne phase one high pressure oxidizer turbopump (HPOTP) pump end 45-mm bore bearing. The bearing configurations that were tested included a Salox/M cage configuration, a silicon nitride ball configuration, an elongated cage configuration, and a Bray 601 grease configuration.

  7. Rotor-Bearing Dynamics Technology Design Guide. Part 4. Cylindrical Roller Bearings

    Science.gov (United States)

    1979-12-01

    ýbluck ,,lb.,mb i Tapered Roller Bearings Roller Beating Stiffness Tapered Roller Bearing Stiffness Turbine Bearings VRoller Bearings Rotordynamics ...input for rotordynamic response programs. The complete stiffness matrix is calculated including centrifugal effects. Considerations such as elastohydro...those parts directly connected with preparation of input for the rotordynamic response programs (Part 1(5) of the revised series) were retained. The

  8. Study on water lubricated bearings of high speed pump based on numerical simulation

    Science.gov (United States)

    Bai, Y. X.; Kong, F. Y.; Sun, J. R.; Yuan, X.

    2016-05-01

    A method is presented for calculating and analyzing the performance of water lubricated bearing of high speed pump under different structure. In present work, six kinds of bearings in different radial clearance(C), which are 0.02, 0.04, 0.06, 0.08, 0.10and0.12 respectively, under the same minimum water film thickness, have been designed. The models are built by CREO and numerical simulated by ansys. The main content of the present work is to analyze the relationship between the pressure and the load carrying capacity with different radial clearance(C) by ansys workbench based on Fluid-Solid coupling through ansys workbench.The stress deformations of bearings are also acquired through thermal-structure coupling. From the comparing result among the numerical analysis under the six different model of water lubricated bearing, the relationship between radial clearance(C) and load carrying capacity, as well as the deformation of bearing under different radial clearance(C), are obtained. Further, results indicates that, a proper selection of radial clearance(C) is essential to enhance the bearing performance.

  9. State Space Formulation of Nonlinear Vibration Responses Collected from a Dynamic Rotor-Bearing System: An Extension of Bearing Diagnostics to Bearing Prognostics

    Directory of Open Access Journals (Sweden)

    Peter W. Tse

    2017-02-01

    Full Text Available Bearings are widely used in various industries to support rotating shafts. Their failures accelerate failures of other adjacent components and may cause unexpected machine breakdowns. In recent years, nonlinear vibration responses collected from a dynamic rotor-bearing system have been widely analyzed for bearing diagnostics. Numerous methods have been proposed to identify different bearing faults. However, these methods are unable to predict the future health conditions of bearings. To extend bearing diagnostics to bearing prognostics, this paper reports the design of a state space formulation of nonlinear vibration responses collected from a dynamic rotor-bearing system in order to intelligently predict bearing remaining useful life (RUL. Firstly, analyses of nonlinear vibration responses were conducted to construct a bearing health indicator (BHI so as to assess the current bearing health condition. Secondly, a state space model of the BHI was developed to mathematically track the health evolution of the BHI. Thirdly, unscented particle filtering was used to predict bearing RUL. Lastly, a new bearing acceleration life testing setup was designed to collect natural bearing degradation data, which were used to validate the effectiveness of the proposed bearing prognostic method. Results show that the prediction accuracy of the proposed bearing prognostic method is promising and the proposed bearing prognostic method is able to reflect future bearing health conditions.

  10. Changes in Hardware in Order to Accommodate Compliant Foil Air Bearings of a Larger Size

    Science.gov (United States)

    Zeszotek, Michelle

    2004-01-01

    Compliant foil air bearings are at the forefront of the Oil-Free turbomachinery revolution of supporting gas turbine engines with air lubricated hydrodynamic bearings. Foil air bearings have existed for almost fifty years, yet their commercialization has been confined to relatively small, high-speed systems characterized by low temperatures and loads, such as in air cycle machines, turbocompressors and micro-turbines. Recent breakthroughs in foil air bearing design and solid lubricant coating technology, have caused a resurgence of research towards applying Oil-Free technology to more demanding applications on the scale of small and mid range aircraft gas turbine engines. In order to foster the transition of Oil-Free technology into gas turbine engines, in-house experiments need to be performed on foil air bearings to further the understanding of their complex operating principles. During my internship at NASA Glenn in the summer of 2003, a series of tests were performed to determine the internal temperature profile in a compliant bump- type foil journal air bearing operating at room temperature under various speeds and load conditions. From these tests, a temperature profile was compiled, indicating that the circumferential thermal gradients were negligible. The tests further indicated that both journal rotational speed and radial load are responsible for heat generation with speed playing a more significant role in the magnitude of the temperatures. As a result of the findings from the tests done during the summer of 2003, it was decided that further testing would need to be done, but with a bearing of a larger diameter. The bearing diameter would now be increased from two inches to three inches. All of the currently used testing apparatus was designed specifically for a bearing that was two inches in diameter. Thus, my project for the summer of 2004 was to focus specifically on the scatter shield put around the testing rig while running the bearings. Essentially

  11. 14 CFR 23.623 - Bearing factors.

    Science.gov (United States)

    2010-01-01

    ... Bearing factors. (a) Each part that has clearance (free fit), and that is subject to pounding or vibration, must have a bearing factor large enough to provide for the effects of normal relative motion. (b) For control surface hinges and control system joints, compliance with the factors prescribed in §§ 23.657 and...

  12. Precision instrumentation for rolling element bearing characterization

    Science.gov (United States)

    Marsh, Eric R.; Vigliano, Vincent C.; Weiss, Jeffrey R.; Moerlein, Alex W.; Vallance, R. Ryan

    2007-03-01

    This article describes an instrument to measure the error motion of rolling element bearings. This challenge is met by simultaneously satisfying four requirements. First, an axial preload must be applied to seat the rolling elements in the bearing races. Second, one of the races must spin under the influence of an applied torque. Third, rotation of the remaining race must be prevented in a way that leaves the radial, axial/face, and tilt displacements free to move. Finally, the bearing must be fixtured and measured without introducing off-axis loading or other distorting influences. In the design presented here, an air bearing reference spindle with error motion of less than 10 nm rotates the inner race of the bearing under test. Noninfluencing couplings are used to prevent rotation of the bearing outer race and apply an axial preload without distorting the bearing or influencing the measurement. Capacitive displacement sensors with 2 nm resolution target the nonrotating outer race. The error motion measurement repeatability is shown to be less than 25 nm. The article closes with a discussion of how the instrument may be used to gather data with sufficient resolution to accurately estimate the contact angle of deep groove ball bearings.

  13. Can polar bear hairs absorb environmental energy?

    Directory of Open Access Journals (Sweden)

    He Ji-Huan

    2011-01-01

    Full Text Available A polar bear (Ursus maritimus has superior ability to survive in harsh Arctic regions, why does the animal have such an excellent thermal protection? The present paper finds that the unique labyrinth cavity structure of the polar bear hair plays an important role. The hair can not only prevent body temperature loss but can also absorb energy from the environment.

  14. Can polar bear hairs absorb environmental energy?

    OpenAIRE

    He Ji-Huan; Wang Qing-Li; Sun Jie

    2011-01-01

    A polar bear (Ursus maritimus) has superior ability to survive in harsh Arctic regions, why does the animal have such an excellent thermal protection? The present paper finds that the unique labyrinth cavity structure of the polar bear hair plays an important role. The hair can not only prevent body temperature loss but can also absorb energy from the environment.

  15. Movie Director Bags a Silver Bear

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Chinese director and film writer Wang Xiaoshuai has walked away with the Silver Bear award at the 58th Berlin International Film Festival for best script of Zuo You, or In Love We Trust. Back in 2001, Wang won his first Silver Bear award for directing Beijing

  16. Shaft Center Orbit in Dynamically Loaded Bearings

    DEFF Research Database (Denmark)

    Klit, Peder

    2005-01-01

    The aim of this work is to demonstrate how to utilize the bearings damping coe±cients to estimate the orbit for a dynamically loaded journal bearing. The classical method for this analysis was developed by Booker in 1965 [1]and described further in 1972 [2]. Several authors have re¯ned this method...... seventies Jorgen W. Lund pointed out in lecture notes that the dynamic damping coe±cients of the bearing could be used to ¯nd the shaft orbit for dynamically loaded bearings. For simplicity the "Short-Width-Journal-Bearing Theory" is used as a basis for ¯nding the damping coe±cients in this work...

  17. Trends in Controllable Oil Film Bearings

    DEFF Research Database (Denmark)

    Santos, Ilmar

    2011-01-01

    This work gives an overview about the theoretical and experimental achievements of mechatronics applied to oil film bearings, with the aim of: controlling the lateral vibration of flexible rotating shafts; modifying bearing dynamic characteristics, as stiffness and damping properties; increasing...... the rotational speed ranges by improving damping and eliminating instability problems, for example, by compensating cross-coupling destabilizing effects; reducing startup torque and energy dissipation in bearings; compensating thermal effects. It is shown that such controllable bearings can act as "smart......" components and be applied to rotating machines with the goal of avoiding unexpected stops of plants, performing rotordynamic tests and identifying model parameters "on site". Emphasis is given to the controllable lubrication (active lubrication) applied to different types of oil film bearings, i...

  18. Geology and geomorphology of Bear Lake Valley and upper Bear River, Utah and Idaho

    Science.gov (United States)

    Reheis, M.C.; Laabs, B.J.C.; Kaufman, D.S.

    2009-01-01

    Bear Lake, on the Idaho-Utah border, lies in a fault-bounded valley through which the Bear River flows en route to the Great Salt Lake. Surficial deposits in the Bear Lake drainage basin provide a geologic context for interpretation of cores from Bear Lake deposits. In addition to groundwater discharge, Bear Lake received water and sediment from its own small drainage basin and sometimes from the Bear River and its glaciated headwaters. The lake basin interacts with the river in complex ways that are modulated by climatically induced lake-level changes, by the distribution of active Quaternary faults, and by the migration of the river across its fluvial fan north of the present lake. The upper Bear River flows northward for ???150 km from its headwaters in the northwestern Uinta Mountains, generally following the strike of regional Laramide and late Cenozoic structures. These structures likely also control the flow paths of groundwater that feeds Bear Lake, and groundwater-fed streams are the largest source of water when the lake is isolated from the Bear River. The present configuration of the Bear River with respect to Bear Lake Valley may not have been established until the late Pliocene. The absence of Uinta Range-derived quartzites in fluvial gravel on the crest of the Bear Lake Plateau east of Bear Lake suggests that the present headwaters were not part of the drainage basin in the late Tertiary. Newly mapped glacial deposits in the Bear River Range west of Bear Lake indicate several advances of valley glaciers that were probably coeval with glaciations in the Uinta Mountains. Much of the meltwater from these glaciers may have reached Bear Lake via groundwater pathways through infiltration in the karst terrain of the Bear River Range. At times during the Pleistocene, the Bear River flowed into Bear Lake and water level rose to the valley threshold at Nounan narrows. This threshold has been modified by aggradation, downcutting, and tectonics. Maximum lake

  19. Inhibition of hepatic fibrosis with artificial microRNA using ultrasound and cationic liposome-bearing microbubbles.

    Science.gov (United States)

    Yang, D; Gao, Y-H; Tan, K-B; Zuo, Z-X; Yang, W-X; Hua, X; Li, P-J; Zhang, Y; Wang, G

    2013-12-01

    We sought to investigate the antifibrotic effects of an artificial microRNA (miRNA) targeting connective tissue growth factor (CTGF) using the ultrasound-targeted cationic liposome-bearing microbubble destruction gene delivery system. Cationic liposomes were conjugated with microbubbles using a biotin-avidin system. Plasmids carrying the most effective artificial miRNA sequences were delivered by ultrasound-targeted cationic liposome-bearing microbubble destruction gene delivery system to rats with hepatic fibrosis. The results show that this method of gene delivery effectively transported the plasmids to the rat liver. The artificial miRNA reduced hepatic fibrosis pathological alterations as well as the protein and mRNA expressions of CTGF and transforming growth factor β1. Furthermore, the CTGF gene silencing decreased the levels of type I collagen and α-smooth muscle actin (Pliposome-bearing microbubble destruction may be an efficacious therapeutic method to ameliorate hepatic fibrosis.

  20. THE STRUCTURAL ANALYSIS OF STEEL SILOS WITH CYLINDRICAL-WALL BEARING AND PROFILE-STEEL BEARING

    Directory of Open Access Journals (Sweden)

    Zhengjun Tang

    2015-04-01

    Full Text Available The silos are widely used in bulk material in many fields such as agriculture, mining, chemical, electric power storage, etc. Thin metal cylindrical silo shells are vulnerable to buckling failure caused by the compressive wall friction force. In this paper, the structural analysis of two types of steel silo with cylindrical-wall bearing and profile-steel bearing is implemented by Abaqus finite element analysis. The results indicate that under the same loading conditions, steel silos with profile-steel bearing and cylindrical-Wall bearing have similar values in Mises stress, but the steel silo with profile-steel bearing has a smaller radial displacement and a better capability of buckling resistance. Meanwhile, the total steel volumes reduced 8.0% comparing to the steel silo with cylindrical-wall bearing. Therefore, steel soil with profile-steel bearing not only has a less steel volumes but also a good stability.

  1. Radiation tolerance in water bears.

    Science.gov (United States)

    Horikawa, D. D.; Sakashita, T.; Katagiri, C.; Watanabe, M.; Nakahara, Y.; Okuda, T.; Hamada, N.; Wada, S.; Funayama, T.; Kobayashi, Y.

    Tardigrades water bears are tiny invertebrates forming a phylum and inhabit various environments on the earth Terrestrial tardigrades enter a form called as anhydrobiosis when the surrounding water disappears Anhyydrobiosis is defined as an ametabolic dry state and followed by recovering their activity when rehydrated Anhydrobiotic tardigrades show incredible tolerance to a variety of extreme environmental conditions such as temperatures -273 r C to 151 r C vacuum high pressure 600 MPa and chemicals that include alcohols and methyl bromide In these views there have been some discussions about their potential for surviving outer space In the present study we demonstrated the survival limit not merely against gamma-rays but against heavy ions in the tardigrade Milnesium tardigradum in order to evaluate the effects of radiations on them The animals were exposure to 500 to 7000 Gy of gamma-rays or 500 to 8000 Gy of heavy ions 4 He in their hydrated or anhydrobiotic state The results showed that both of hydrated and anhydrobiotic animals have high radio-tolerance median lethal dose LD50 48 h of gamma-rays or heavy ions in M tardigradum was more than 4000 Gy indicating that this species is categorized into the most radio-tolerant animals We suggest that tardigrades will be suitable model animals for extremophilic multicellular organisms and may provide a survival strategy in extraterrestrial environments

  2. Solid-Phase Synthesis of PEGylated Lipopeptides Using Click Chemistry

    DEFF Research Database (Denmark)

    Jølck, Rasmus Irming; Berg, Rolf Henrik; Andresen, Thomas Lars

    2010-01-01

    A versatile methodology for efficient synthesis of PEGylated lipopeptides via CuAAC “Click” conjugation between alkyne-bearing solid-supported lipopeptides and azido-functionalized PEGs is described. This new and very robust method offers a unique platform for synthesizing PEGylated lipopeptides...

  3. Polar bears and sea ice habitat change

    Science.gov (United States)

    Durner, George M.; Atwood, Todd C.; Butterworth, Andy

    2017-01-01

    The polar bear (Ursus maritimus) is an obligate apex predator of Arctic sea ice and as such can be affected by climate warming-induced changes in the extent and composition of pack ice and its impacts on their seal prey. Sea ice declines have negatively impacted some polar bear subpopulations through reduced energy input because of loss of hunting habitats, higher energy costs due to greater ice drift, ice fracturing and open water, and ultimately greater challenges to recruit young. Projections made from the output of global climate models suggest that polar bears in peripheral Arctic and sub-Arctic seas will be reduced in numbers or become extirpated by the end of the twenty-first century if the rate of climate warming continues on its present trajectory. The same projections also suggest that polar bears may persist in the high-latitude Arctic where heavy multiyear sea ice that has been typical in that region is being replaced by thinner annual ice. Underlying physical and biological oceanography provides clues as to why polar bear in some regions are negatively impacted, while bears in other regions have shown no apparent changes. However, continued declines in sea ice will eventually challenge the survival of polar bears and efforts to conserve them in all regions of the Arctic.

  4. Space Telescope Fine Guidance Sensor Bearing Anomaly

    Science.gov (United States)

    Loewenthal, S.; Esper, J.; Pan, J.; Decker, J.

    1996-01-01

    Early in 1993, a servo motor within one of three Fine Guidance Sensors (FGS) aboard the Hubble Space Telescope (HST) reached stall torque levels on several occasions. Little time was left to plan replacement during the first servicing mission, scheduled at the end of '93. Accelerated bearing life tests confirmed that a small angle rocking motion, known as Coarse Track (CT), accelerated bearing degradation. Saturation torque levels were reached after approximately 20 million test cycles, similar to the flight bearings. Reduction in CT operation, implemented in flight software, extended FGS life well beyond the first servicing mission. However in recent years, bearing torques have resumed upward trends and together with a second, recent bearing torque anomaly has necessitated a scheduled FGS replacement during the upcoming second servicing mission in '97. The results from two series of life tests to quantify FGS bearing remaining life, discussion of bearing on-orbit performance, and future plans to service the FGS servos are presented in this paper.

  5. Genomic sequencing of Pleistocene cave bears

    Energy Technology Data Exchange (ETDEWEB)

    Noonan, James P.; Hofreiter, Michael; Smith, Doug; Priest, JamesR.; Rohland, Nadin; Rabeder, Gernot; Krause, Johannes; Detter, J. Chris; Paabo, Svante; Rubin, Edward M.

    2005-04-01

    Despite the information content of genomic DNA, ancient DNA studies to date have largely been limited to amplification of mitochondrial DNA due to technical hurdles such as contamination and degradation of ancient DNAs. In this study, we describe two metagenomic libraries constructed using unamplified DNA extracted from the bones of two 40,000-year-old extinct cave bears. Analysis of {approx}1 Mb of sequence from each library showed that, despite significant microbial contamination, 5.8 percent and 1.1 percent of clones in the libraries contain cave bear inserts, yielding 26,861 bp of cave bear genome sequence. Alignment of this sequence to the dog genome, the closest sequenced genome to cave bear in terms of evolutionary distance, revealed roughly the expected ratio of cave bear exons, repeats and conserved noncoding sequences. Only 0.04 percent of all clones sequenced were derived from contamination with modern human DNA. Comparison of cave bear with orthologous sequences from several modern bear species revealed the evolutionary relationship of these lineages. Using the metagenomic approach described here, we have recovered substantial quantities of mammalian genomic sequence more than twice as old as any previously reported, establishing the feasibility of ancient DNA genomic sequencing programs.

  6. Journal bearing impedance descriptions for rotordynamic applications

    Science.gov (United States)

    Childs, D.; Moes, H.; Van Leeuwen, H.

    1976-01-01

    The paper deals with the development of analytic descriptions for plain circumferentially-symmetric fluid journal bearings, which are suitable for use in rotor dynamic analysis. The bearing impedance vector is introduced, which defines the bearing reaction force components as a function of the bearing motion. Impedances are derived directly for the Ocvirk (short) and Sommerfeld (long) bearings, and the relationships between the impedance vector and the more familiar mobility vector are developed and used to derive analytic impedance for finite-length bearings. The static correctness of the finite-length cavitating impedance is verified. Analytic stiffness and damping coefficient definitions are derived in terms of an impedance vector for small motion around an equilibrium position and demonstrated for the finite-length cavitating impedance. Nonlinear transient rotordynamic simulations are presented for the short pi and 2-pi impedances and the finite-length cavitating impedance. It is shown that finite-length impedance yields more accurate results for substantially less computer time than the short-bearing numerical-pressure-integration approach.

  7. Grizzly bear diet shifting on reclaimed mines

    Directory of Open Access Journals (Sweden)

    Bogdan Cristescu

    2015-07-01

    Full Text Available Industrial developments and reclamation change habitat, possibly altering large carnivore food base. We monitored the diet of a low-density population of grizzly bears occupying a landscape with open-pit coal mines in Canada. During 2009–2010 we instrumented 10 bears with GPS radiocollars and compared their feeding on reclaimed coal mines and neighboring Rocky Mountains and their foothills. In addition, we compared our data with historical bear diet for the same population collected in 2001–2003, before extensive mine reclamation occurred. Diet on mines (n=331 scats was dominated by non-native forbs and graminoids, while diets in the Foothills and Mountains consisted primarily of ungulates and Hedysarum spp. roots respectively, showing diet shifting with availability. Field visitation of feeding sites (n=234 GPS relocation clusters also showed that ungulates were the main diet component in the Foothills, whereas on reclaimed mines bears were least carnivorous. These differences illustrate a shift to feeding on non-native forbs while comparisons with historical diet reveal emergence of elk as an important bear food. Food resources on reclaimed mines attract bears from wilderness areas and bears may be more adaptable to landscape change than previously thought. The grizzly bear’s ready use of mines cautions the universal view of this species as umbrella indicative of biodiversity.

  8. Eastern slopes grizzly bear project : project update

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-01-01

    This report updates a study to examine the cumulative effects of human activities on the grizzly bears in the central Canadian Rockies. The project was initiated in 1994 to acquire accurate scientific information on the habitat and populations of grizzly bears in the area of the Banff National Park and Kananaskis Country. This area is probably the most heavily used and developed area where the grizzly still survives. The information gathered throughout the course of the study is used to better protect and manage the bears and other sensitive carnivores in the region. Using telemetry, researchers monitored 25 grizzly bears which were radio-collared in a 22,000 square-kilometer area in the upper Bow Valley drainage of the eastern Alberta slopes. The researchers worked with representatives from Husky Oil and Rigel Energy on the development of the Moose Mountain oil and gas field without adversely affecting the grizzly bear population. Information collected over eight years indicates that the grizzly bears have few and infrequent offspring. Using the information gathered thus far, the location of the Moose Mountain to Jumping Pound pipeline was carefully selected, since the bears suffer from high mortality, and the food and cover had already been compromised by the high number of roads, trails and other human activities in the area. The research concluded in November 2001 provides sufficient information to accurately asses the status of the grizzly bear population and habitat. The data will be analyzed and integrated in 2002 into models that reflect the variables affecting grizzly bears and a final report will be published.

  9. Genetics Home Reference: Beare-Stevenson cutis gyrata syndrome

    Science.gov (United States)

    ... Health Conditions Beare-Stevenson cutis gyrata syndrome Beare-Stevenson cutis gyrata syndrome Enable Javascript to view the ... Download PDF Open All Close All Description Beare-Stevenson cutis gyrata syndrome is a genetic disorder characterized ...

  10. Active magnetic bearings applied to industrial compressors

    Science.gov (United States)

    Kirk, R. G.; Hustak, J. F.; Schoeneck, K. A.

    1993-01-01

    The design and shop test results are given for a high-speed eight-stage centrifugal compressor supported by active magnetic bearings. A brief summary of the basic operation of active magnetic bearings and the required rotor dynamics analysis are presented with specific attention given to design considerations for optimum rotor stability. The concerns for retrofits of magnetic bearings in existing machinery are discussed with supporting analysis of a four-stage centrifugal compressor. The current status of industrial machinery in North America using this new support system is presented and recommendations are given on design and analysis requirements for successful machinery operation of either retrofit or new design turbomachinery.

  11. Hydrostatic, aerostatic and hybrid bearing design

    CERN Document Server

    Rowe, W Brian

    2012-01-01

    Solve your bearing design problems with step-by-step procedures and hard-won performance data from a leading expert and consultant Compiled for ease of use in practical design scenarios, Hydrostatic, Aerostatic and Hybrid Bearing Design provides the basic principles, design procedures and data you need to create the right bearing solution for your requirements. In this valuable reference and design companion, author and expert W. Brian Rowe shares the hard-won lessons and figures from a lifetime's research and consultancy experience. Coverage includes: Clear e

  12. Microeconomic analysis of military aircraft bearing restoration

    Science.gov (United States)

    Hein, G. F.

    1976-01-01

    The risk and cost of a bearing restoration by grinding program was analyzed. A microeconomic impact analysis was performed. The annual cost savings to U.S. Army aviation is approximately $950,000.00 for three engines and three transmissions. The capital value over an indefinite life is approximately ten million dollars. The annual cost savings for U.S. Air Force engines is approximately $313,000.00 with a capital value of approximately 3.1 million dollars. The program will result in the government obtaining bearings at lower costs at equivalent reliability. The bearing industry can recover lost profits during a period of reduced demand and higher costs.

  13. Rotor Vibration Reduction via Active Hybrid Bearings

    DEFF Research Database (Denmark)

    Nicoletti, Rodrigo; Santos, Ilmar

    2002-01-01

    The use of fluid power to reduce and control rotor vibration in rotating machines is investigated. An active hybrid bearing is studied, whose main objective is to reduce wear and vibration between rotating and stationary machinery parts. By injecting pressurised oil into the oil film, through...... orifices machined in the bearing pads, one can alter the machine dynamic characteristics, thus enhancing its operational range. A mathematical model of the rotor-bearing system, as well as of the hydraulic system, is presented. Numerical results of the system frequency response show good agreement...

  14. On Controllable Elastohydrodynamic Fluid Film Bearings

    DEFF Research Database (Denmark)

    Haugaard, Martin Asger

    This thesis gives a theoretical description of the active tilting-pad journal bearing (ATPJB). It provides the qualified reader with the tools to model an ATPJB, while staying clear of pitfalls. The model is based on well known techniques and allows for local stability analyses, harmonic stationary...... are performed for a tilting-pad journal bearing (TPJB) and an ATPJB under static conditions, followed by a generalisation to dynamic conditions (transient as well as stationary harmonic). These analyses will be of interest to experimentalists, since they permit experiments performed on scaled down test rigs...... the addition of a control system may just as well harm rotor-bearing performance as improve it....

  15. Conical Magnetic Bearing Development and Magnetic Bearing Testing for Extreme Temperature Environments

    Science.gov (United States)

    Keith, Theo G., Jr.; Jansen, Mark

    2004-01-01

    The main proposed research of this grant were: to design a high-temperature, conical magnetic bearing facility, to test the high-temperature, radial magnetic bearing facility to higher speeds, to investigate different backup bearing designs and materials, to retrofit the high-temperature test facility with a magnetic thrust bearing, to evaluate test bearings at various conditions, and test several lubricants using a spiral orbit tribometer. A high-temperature, conical magnetic bearing facility has been fully developed using Solidworks. The facility can reuse many of the parts of the current high-temperature, radial magnetic bearing, helping to reduce overall build costs. The facility has the ability to measure bearing force capacity in the X, Y, and Z directions through a novel bearing mounting design. The high temperature coils and laminations, a main component of the facility, are based upon the current radial design and can be fabricated at Texas A&M University. The coil design was highly successful in the radial magnetic bearing. Vendors were contacted about fabrication of the high temperature lamination stack. Stress analysis was done on the laminations. Some of the components were procured, but due to budget cuts, the facility build up was stopped.

  16. Effect of baclofen on liquid and solid gastric emptying in rats Efeito do baclofen no esvaziamento gástrico de líquido e de sólidos em rato

    Directory of Open Access Journals (Sweden)

    Edgard Ferro Collares

    2010-09-01

    Full Text Available CONTEXT: Gamma-aminobutyric acid (GABA is a potent inhibitory neurotransmitter. There is evidence that GABA B receptors located in the dorsal complex and in afferent fibers of the vagus nerve participate in the control of gastrointestinal motility. OBJECTIVE: To assess the intracerebroventricularly (ICV and intravenously (IV effect of baclofen, a GABA B receptor agonist, on liquid and solid gastric emptying in rats. METHODS: Adult male Wistar rats weighing 250-300 g (n = 6-8 animals were used. Gastric emptying of liquid test meals labeled with phenol red was evaluated by the determination of percent gastric retention (%GR 10 and 15 min after orogastric administration of saline and 10% glucose meals, respectively. Baclofen was injected ICV (1 and 2 µg/animal through a tube implanted into the lateral ventricle of the brain and was injected IV (1 and 2 mg/kg into a tail vein. The gastric emptying of liquid was determined 10 or 30 min after ICV and IV baclofen administration, respectively. The gastric emptying of the solid meal was assessed by the determination of percent gastric retention 2 h after the beginning of the ingestion of the habitual ratio by the animal, consumed over a period of 30 min. Baclofen was administered ICV (1 and 2 µg/animal or IV (1 and 2 mg/kg immediately after the end of the ingestion of the solid meal. The control groups received vehicle (sterile saline solution ICV or IV. RESULTS: The group of animals receiving baclofen ICV (2 mg/animal presented a significantly lower (PCONTEXTO: O ácido gama-aminobutírico (GABA é um potente neurotransmissor inibitório. Há evidências que receptores GABA>B localizados no complexo dorsal do vago e em fibras aferentes do nervo vago participam no controle da motricidade gastrointestinal. OBJETIVO: Avaliar o efeito intracerebroventricular (ICV e intravenoso (IV do baclofen, um agonista para receptores GABA B, sobre o esvaziamento gástrico de líquidos e de sólidos em ratos. M

  17. Statics of deformable solids

    CERN Document Server

    Bisplinghoff, Raymond L; Pian, Theodore HH

    2014-01-01

    Profusely illustrated exposition of fundamentals of solid mechanics and principles of mechanics, statics, and simple statically indeterminate systems. Covers strain and stress in three-dimensional solids, elementary elasticity, energy principles in solid continuum, and more. 1965 edition.

  18. TRANSIENT TEMPERATURE FIELD IN ACTIVE THRUST MAGNETIC BEARING

    Institute of Scientific and Technical Information of China (English)

    Sun Shouqun; Geng Haipeng; Guo Keqian

    2005-01-01

    A transient temperature field model in a thrust magnetic bearing is built in which the heat resources come mainly from the eddy-current loss of solid cores and the copper loss of coils. The transient temperature field, system temperature rise and the thermo-equilibrium state during the rotor starting-up are calculated considering only the copper loss and the eddy-current loss. The numerical results indicate that the temperatures in coils and in magnets rise rapidly, their thermo-equilibrium states are formed within a short time. The temperatures in a thrust-disk and in a rotor rise slowly, their thermo-equilibrium states are formed after a long period time. The temperatures of the thrust-disk and the rotor are far higher than the temperatures of coils and/or magnets after the thermo-equilibrium state has come into being.

  19. Flywheel Energy Storage System Suspended by Hybrid Magnetic Bearing

    Science.gov (United States)

    Owusu-Ansah, Prince; Hu, Yefa; Misbawu, Adam

    This work presents a prototype flywheel energy storage system (FESS) suspended by hybrid magnetic bearing (HMB) rotating at a speed of 20000rpm with a maximum storage power capacity of 30W with a maximum tip speed of 300m/s. The design presented is an improvement of most existing FESS, as the design incorporates a unique feature in that the upper and the lower rotor and stator core are tapered which enhances larger thrust and much lower radial force to be exerted on the system. Without any adverse effect being experienced by the model. The work also focuses on the description of developing a prototype FESS suspended by HMB using solid works as a basis of developing in the nearer future a more improved FESS suspended by HMB capable of injecting the ever increasing high energy demand situation in the 21st century and beyond.

  20. Water resources of Sleeping Bear Dunes National Lakeshore, Michigan

    Science.gov (United States)

    Handy, A.H.; Stark, J.R.

    1984-01-01

    Sleeping Bear Dunes National Lakeshore in a water-rich area. It borders Lake Michigan and several small streams flow through the park to the lake. Small lakes are numerous within the park and near its boundaries. Ground water is available at most places in the park and wells yield as much as 100 gallons per minute. Water from streams, lakes, wells, and springs is of good quality. Dissolved solids range from 35 to 180 mg/L in lakes, from 145 to 214 mg/L in streams, and from 136 to 468 mg/L in groundwater. Analyses of samples for pesticides and trace metals indicate that no pesticides are present in the water, and that concentrations of trace metals do not exceed recommended drinking-water standards. Surface and ground water are available in sufficient quantity in most areas of the park for the development of water supplies for visitor 's centers, campgrounds, picnic areas, and other park facilities.

  1. Vibration Characteristics of Hydrodynamic Fluid Film Pocket Journal Bearings

    Directory of Open Access Journals (Sweden)

    N. S. Feng

    2010-01-01

    Full Text Available Theoretical analyses of hydrodynamic fluid film bearings with different bearing profiles rely on solutions of the Reynolds equation. This paper presents an approach used for analysing the so-called pocket bearings formed from a combination of offset circular bearing profiles. The results show that the variation of the dynamic bearing characteristics with different load inclinations for the pocket bearings is less than that for the elliptic bearing counterpart. It is shown that the natural frequencies as well as the critical speeds, and hence the vibrational behaviour, can also be significantly different for an industrial rotor supported by the different bearings.

  2. The polar bear and its protection

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — No census has been made of the polar bear population and indeed the general movements of the animals within their range are poorly known. At present it is not...

  3. Bear Lake-Minidoka - Phragmites Control

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Bear Lake: Phragmites patches were sprayed on the refuge & north of the lake proper. Minidoka: patches along the Snake River & Lake Walcott were treated with...

  4. Mercury biomagnification in polar bears ( Ursus maritimus)

    Science.gov (United States)

    Horton, T. W.; Blum, J. D.; Xie, Z.; Hren, M.; Chamberlain, C. P.

    2007-12-01

    Mercury biomagnification occurs in a variety of ecosystems resulting in greater potential for toxicological effects in higher-level trophic feeders. However, Hg transport pathways through different foodweb channels are not well known, particularly in high-latitude systems affected by atmospheric Hg deposition associated with snow and ice. Stable carbon and nitrogen isotope ratios and Hg concentrations determined for 26 late 19th and early 20th century polar bear hair specimens collected from cataloged museum collections elucidate relationships between high latitude marine foodweb structure and Hg transport pathways. Nitrogen and carbon isotopic compositions suggest that polar bears derive nutrition from both open water (pelagic) and ice associated (sympagic) foodweb channels. Correlation between Hg concentrations and nitrogen isotope compositions indicate mercury biomagnification occurred in most of the polar bears investigated. Interpretation of stable isotope based foodweb structure in concert with Hg concentrations further suggests that Hg biomagnification occurred to a greater degree in polar bears participating in pelagic foodweb channels.

  5. AX-5 space suit bearing torque investigation

    Science.gov (United States)

    Loewenthal, Stuart; Vykukal, Vic; Mackendrick, Robert; Culbertson, Philip, Jr.

    1990-01-01

    The symptoms and eventual resolution of a torque increase problem occurring with ball bearings in the joints of the AX-5 space suit are described. Starting torques that rose 5 to 10 times initial levels were observed in crew evaluation tests of the suit in a zero-g water tank. This bearing problem was identified as a blocking torque anomaly, observed previously in oscillatory gimbal bearings. A large matrix of lubricants, ball separator designs and materials were evaluated. None of these combinations showed sufficient tolerance to lubricant washout when repeatedly cycled in water. The problem was resolved by retrofitting a pressure compensated, water exclusion seal to the outboard side of the bearing cavity. The symptoms and possible remedies to blocking are discussed.

  6. Polar bear research in Alaska, spring 1982

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — An investigation of the ecology and population dynamics of Alaskan polar bears has continued since 1967. As part of that program, U.S. Fish and Wildlife Service...

  7. Polar bear research in Alaska, spring 1981

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — An investigation of the ecology and population dynamics of Alaskan polar bears has continued since 1967. As part of that program, U.S. Fish and Wildlife Service...

  8. Telemetry techniques used on Kodiak brown bear

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report summarizes the results of a study on the techniques used to monitor the movements of Kodiak brown bears instrumented with radio transmitters. Methods...

  9. LIGHT-WEIGHT LOAD-BEARING STRUCTURE

    DEFF Research Database (Denmark)

    2009-01-01

    The invention relates to a light-weight load-bearing structure (1) with optimized compression zone (2), where along one or more compression zones (2) in the structure (1) to be cast a core (3) of strong concrete is provided, which core (3) is surrounded by concrete of less strength (4) compared...... to the core (3) of strong concrete. The invention also relates to a method of casting of light-weight load-bearing structures (1) with optimized compression zone (2) where one or more channels, grooves, ducts, pipes and/or hoses (5) formed in the load-bearing structure (1) serves as moulds for moulding one...... or more cores (3) of strong concrete in the light-weight load-bearing structure (1)....

  10. Active Magnetic Bearings – Magnetic Forces

    DEFF Research Database (Denmark)

    Kjølhede, Klaus

    2006-01-01

    Parameter identification procedures and model validation are major steps towards intelligent machines supported by active magnetic bearings (AMB). The ability of measuring the electromagnetic bearing forces, or deriving them from measuring the magnetic flux, strongly contributes to the model...... validation and leads to novel approaches in identifying crucial rotor parameters. This is the main focus of this paper, where an intelligent AMB is being developed with the aim of aiding the accurate identification of damping and stiffness coefficients of journal bearings and seals. The main contribution...... of the magnetic forces are led by using different experimental tests: (I) by using hall sensors mounted directly on the poles (precise measurements of the magnetic flux) and by an auxiliary system, composed of strain gages and flexible beams attached to the rotor; (II) by measuring the input current and bearing...

  11. North Cascades Grizzly Bear Ecosystem Evaluation

    Data.gov (United States)

    Oak Ridge National Laboratory — We conducted a 6-year evaluation of the North Cascades Grizzly Bear Ecosystem (NCGBE) in north-central Washington to determine the suitability of the area to support...

  12. Cavitation Peening of Aerospace Bearings Project

    Data.gov (United States)

    National Aeronautics and Space Administration — High-value bearings are a critical part of the safety, reliability, cost and performance of modern aircraft. A typical passenger jet will have 100 to 175 high-valve...

  13. RUBBER BEARINGS FOR DOWN-HOLE PUMPS

    Energy Technology Data Exchange (ETDEWEB)

    Bob Sullivan Mammoth Pacific, L.P.

    2005-09-07

    Synopsis of project activity: 1998--Awarded cost share grant from DOE. 1st Qtr 1999--Developed fail safe lubricating system. 2nd Qtr 1999--Performed first large scale test with nitrile based bearings. It failed due to material swelling. Failure was blamed on improper tolerance. 3rd Qtr 1999--Material tests were performed with autoclaves and exposure tests to Casa Diablo fluids. Testing of Viton materials began. Alternate bearing designs were developed to limit risk of improper tolerances. 4th Qtr 1999--Site testing indicated a chemical attack on the bearing material caused the test failure and not improper bearing tolerance. 1st Qtr 2000--The assistance of Brookhaven National Laboratory was obtained in evaluating the chemical attack. The National Laboratory also began more elaborate laboratory testing on bearing materials. 2nd Qtr 2000--Testing indicated Viton was an inappropriate material due to degradation in Casa Diablo fluid. Testing of EPDM began. 3rd Qtr 2001--EPDM bearings were installed for another large scale test. Bearings failed again due to swelling. Further testing indicated that larger then expected oil concentrations existed in lubricating water geothermal fluid causing bearing failure. 2002-2003--Searched for and tested several materials that would survive in hot salt and oil solutions. Kalrez{reg_sign}, Viton{reg_sign}ETP 500 and Viton{reg_sign}GF were identified as possible candidates. 2003-2005--Kalrez{reg_sign}has shown superior resistance to downhole conditions at Casa Diablo from among the various materials tested. Viton ETP-500 indicated a life expectancy of 13 years and because it is significantly less expensive then Kalrez{reg_sign}, it was selected as the bearing material for future testing. Unfortunately during the laboratory testing period Dupont Chemical chose to stop manufacturing this specific formulation and replaced it with Viton ETP 600S. The material is available with six different fillers; three based on zinc oxide and three

  14. Active magnetic bearings for optimum turbomachinery design

    Science.gov (United States)

    Hustak, J.; Kirk, R. G.; Schoeneck, K. A.

    1985-01-01

    The design and shop test results are given for a high speed eight stage centrifugal compressor supported by active magnetic bearings. A brief summary of the rotor dynamics analysis is presented with specific attention given to design considerations for optimum rotor stability. The concerns for retrofit of magnetic bearings in existing machinery are discussed with supporting analysis of a four stage centrifugal compressor. Recommendations are given on design and analysis requirements for successful machinery operation of either retrofit or new design turbomachinery.

  15. Silicon Nitride Balls For Cryogenic Bearings

    Science.gov (United States)

    Butner, Myles F.; Ng, Lillian W.

    1990-01-01

    Resistance to wear greater than that of 440C steel. Experiments show lives of ball bearings immersed in liquid nitrogen or liquid oxygen increased significantly when 440C steel balls (running on 440C steel races) replaced by balls of silicon nitride. Developed for use at high temperatures, where lubrication poor or nonexistent. Best wear life of any bearing tested to date and ball material spalls without fracturing. Plans for future tests call for use of liquid oxygen as working fluid.

  16. Flywheel energy storage with superconductor magnetic bearings

    Energy Technology Data Exchange (ETDEWEB)

    Weinberger, Bernard R. (Avon, CT); Lynds, Jr., Lahmer (Glastonbury, CT); Hull, John R. (Hinsdale, IL)

    1993-01-01

    A flywheel having superconductor bearings has a lower drag to lift ratio that translates to an improvement of a factor of ten in the rotational decay rate. The lower drag results from the lower dissipation of melt-processed YBCO, improved uniformity of the permanent magnet portion of the bearings, operation in a different range of vacuum pressure from that taught by the art, and greater separation distance from the rotating members of conductive materials.

  17. Passive magnetic bearings for vehicular electromechanical batteries

    Energy Technology Data Exchange (ETDEWEB)

    Post, R

    1996-03-01

    This report describes the design of a passive magnetic bearing system to be used in electromechanical batteries (flywheel energy storage modules) suitable for vehicular use. One or two such EMB modules might, for example, be employed in a hybrid-electric automobile, providing efficient means for power peaking, i.e., for handling acceleration and regenerative braking power demands at high power levels. The bearing design described herein will be based on a ''dual-mode'' operating regime.

  18. Active magnetic bearings used as exciters for rolling element bearing outer race defect diagnosis.

    Science.gov (United States)

    Xu, Yuanping; Di, Long; Zhou, Jin; Jin, Chaowu; Guo, Qintao

    2016-03-01

    The active health monitoring of rotordynamic systems in the presence of bearing outer race defect is considered in this paper. The shaft is assumed to be supported by conventional mechanical bearings and an active magnetic bearing (AMB) is used in the mid of the shaft location as an exciter to apply electromagnetic force to the system. We investigate a nonlinear bearing-pedestal system model with the outer race defect under the electromagnetic force. The nonlinear differential equations are integrated using the fourth-order Runge-Kutta algorithm. The simulation and experimental results show that the characteristic signal of outer race incipient defect is significantly amplified under the electromagnetic force through the AMBs, which is helpful to improve the diagnosis accuracy of rolling element bearing׳s incipient outer race defect. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

  19. Effects of fluid inertia and bearing flexibility on the performance of finite length journal bearing

    Science.gov (United States)

    Javorova, Juliana; Alexandrov, Vassil

    2017-02-01

    The paper describes the theoretical study concerning the effect of lubricant inertia forces and deformability of the bearing elastic layer on the performance of a plane journal bearing. The problem is investigated for a Newtonian lubricant under isothermal and isoviscous conditions. The analysis considers the generalized Reynolds equation governing the flow of lubricant in the clearance space and the linear elasticity equation governing the displacement field in the bearing shell. An iterative numerical procedure with successive over relaxation is used to pressure distribution within the lubricated conjunction. Bearing performance characteristics have been presented for typically selected values of generalized Reynolds number Re* and elasticity parameters of the elastic liner. It has been observed that the combined effect of fluid inertia forces and bearing flexibility affects the performance characteristics of dynamically loaded journal bearing.

  20. Rotordynamics and bearing design of turbochargers

    Science.gov (United States)

    Chen, Wen Jeng

    2012-05-01

    Turbochargers have gained significant attention in recent years. They are already widely used in automotive, locomotive, and marine applications with diesel engines. They are also applied in the aerospace application to increase the engine performance now. The turbochargers used in automotive and aerospace industry are very light-weight with operating speeds above 100,000 rpm. The turbochargers used in locomotive and marine applications are relatively heavy in size and power compared to the automotive and aerospace applications, and the maximum continuous operating speeds are around 30,000 rpm depending on the diesel engine power rating. Floating ring bushings, semi-floating dampers, ball bearings, and ball bearings with dampers are commonly used in automotive applications for small turbochargers. However, these bearings may not be appropriate for large turbochargers in locomotive and marine applications. Instead, multi-lobed bearings with and without squeeze film dampers are commonly used in these heavy-duty turbochargers. This paper deals with the rotordynamic characteristics of larger turbochargers in locomotive and marine applications. Various bearing designs are discussed. Bearing design parameters are studied and optimal values are suggested. Test results are also presented to support the analytical simulation.

  1. Bearing and gear steels for aerospace applications

    Science.gov (United States)

    Zaretsky, Erwin V.

    1990-01-01

    Research in metallurgy and processing for bearing and gear steels has resulted in improvements in rolling-element bearing and gear life for aerospace application by a factor of approximately 200 over that obtained in the early 1940's. The selection and specification of a bearing or gear steel is dependent on the integration of multiple metallurgical and physical variables. For most aerospace bearings, through-hardened VIM-VAR AISI M-50 steel is the material of preference. For gears, the preferential material is case-carburized VAR AISI 9310. However, the VAR processing for this material is being replaced by VIM-VAR processing. Since case-carburized VIM-VAR M-50NiL incorporates the desirable qualities of both the AISI M-50 and AISI 9310 materials, optimal life and reliability can be achieved in both bearings and gears with a single steel. Hence, this material offers the promise of a common steel for both bearings and gears for future aerospace applications.

  2. A Wide Bandwidth Model for the Electrical Impedance of Magnetic BearingS

    Science.gov (United States)

    Meeker, David C.; Maslen, Eric H.; Noh, Myounggyu D.

    1996-01-01

    Magnetic bearings are often designed using magnetic circuit theory. When these bearings are built, however, effects not included in the usual circuit theory formulation have a significant influence on bearing performance. Two significant sources of error in the circuit theory approach are the neglect of leakage and fringing effects and the neglect of eddy current effects. This work formulates an augmented circuit model in which eddy current and flux leakage and fringing effects are included. Through the use of this model, eddy current power losses and actuator bandwidth can be derived. Electrical impedance predictions from the model are found to be in good agreement with experimental data from a typical magnetic bearing.

  3. Fault Tolerant Magnetic Bearing Testing and Conical Magnetic Bearing Development for Extreme Temperature Environments

    Science.gov (United States)

    Keith, Theo G., Jr.; Clark, Daniel

    2004-01-01

    During the six month tenure of the grant, activities included continued research of hydrostatic bearings as a viable backup-bearing solution for a magnetically levitated shaft system in extreme temperature environments (1000 F), developmental upgrades of the fault-tolerant magnetic bearing rig at the NASA Glenn Research Center, and assisting in the development of a conical magnetic bearing for extreme temperature environments, particularly turbomachinery. It leveraged work from the ongoing Smart Efficient Components (SEC) and the Turbine-Based Combined Cycle (TBCC) program at NASA Glenn Research Center. The effort was useful in providing technology for more efficient and powerful gas turbine engines.

  4. Transient Vibration Prediction for Rotors on Ball Bearings Using Load-dependent Non-linear Bearing Stiffness

    Science.gov (United States)

    Fleming, David P.; Poplawski, J. V.

    2002-01-01

    Rolling-element bearing forces vary nonlinearly with bearing deflection. Thus an accurate rotordynamic transient analysis requires bearing forces to be determined at each step of the transient solution. Analyses have been carried out to show the effect of accurate bearing transient forces (accounting for non-linear speed and load dependent bearing stiffness) as compared to conventional use of average rolling-element bearing stiffness. Bearing forces were calculated by COBRA-AHS (Computer Optimized Ball and Roller Bearing Analysis - Advanced High Speed) and supplied to the rotordynamics code ARDS (Analysis of Rotor Dynamic Systems) for accurate simulation of rotor transient behavior. COBRA-AHS is a fast-running 5 degree-of-freedom computer code able to calculate high speed rolling-element bearing load-displacement data for radial and angular contact ball bearings and also for cylindrical and tapered roller beatings. Results show that use of nonlinear bearing characteristics is essential for accurate prediction of rotordynamic behavior.

  5. Polar bears: the fate of an icon.

    Science.gov (United States)

    Fitzgerald, Kevin T

    2013-11-01

    Polar bears are one of the most iconic animals on our planet. Worldwide, even people who would never see one are drawn to these charismatic arctic ice hunters. They are the world's largest terrestrial carnivore, and despite being born on land, they spend most of their lives out on the sea ice and are considered a marine mammal. Current global studies estimate there are around 20,000 animals in some 19 discrete circumpolar populations. Aside from pregnant females denning in the winter months to give birth, the white bears do not hibernate. They spend their winters on the sea ice hunting seals, an activity they are spectacularly adapted for. Research on these animals is incredibly difficult because of the inhospitable surroundings they inhabit and how inaccessible they make the bears. For many years, the sum of our understanding of the natural history of polar bears came from tracks, scats, the remains of their kills, abandoned dens, and anecdotal observations of native hunters, explorers, and early biologists. Nonetheless, the last 40 years have seen a much better picture of their biology emerge thanks to, first, dedicated Canadian researchers and, later, truly international efforts of workers from many countries. Veterinarians have contributed to our knowledge of the bears by delivering and monitoring anesthesia, obtaining blood samples, performing necropsies, investigating their reproduction, conducting radiotelemetry studies, and examining their behavior. Recently, new technologies have been developed that revolutionize the study of the lives and natural history of undisturbed polar bears. These advances include better satellite radiotelemetry equipment and the development of remote-controlled miniature devices equipped with high-definition cameras. Such new modalities provide dramatic new insights into the life of polar bears. The remarkable degree of specialized adaptation to life on the sea ice that allowed the bears to be successful is the very reason that

  6. Solid lubricants and surfaces

    CERN Document Server

    Braithwaite, E R

    1964-01-01

    Solid Lubricants and Surfaces deals with the theory and use of solid lubricants, particularly in colloidal form. Portions of this book are devoted to graphite and molybdenum disulfides, which are widely used solid lubricants in colloidal form. An extensive literature on the laboratory examination of hundreds of solids as potential lubricants is also provided in this text. Other topics discussed include the metals and solid lubricants; techniques for examining surfaces; other solid lubricants; metal shaping; and industrial uses of solid-lubricant dispersions. This publication is beneficial to e

  7. Critical Pressures of the Thrust Bearing Using a Magnetic Fluid

    OpenAIRE

    長屋, 幸助; 武田, 定彦; 佐藤, 淳; 井開, 重男; 関口, 肇; 斉藤, 登

    1990-01-01

    This paper proposes a thrust bearing lubricated by a magnetic fluid under a magnetic field. The critical pressures of the bearing versus the magnitude of the magnetic flux densities have been investigated experimentally. It is clarified that the critical pressures of the proposed bearing are larger than those of the normal lubricant bearing under high speeds.

  8. Wear numbers for ball cup and journal bearings

    NARCIS (Netherlands)

    Ligterink, D.J.; Moes, H.

    1980-01-01

    A wear number is defined for ball cup bearings and for journal bearings where the cup and the cylindrical bearing are made of soft material. This dimensionless wear number provides a relation between the following five quantities: the radius of the ball or the length of the journal bearing in millim

  9. 49 CFR 230.102 - Tender plain bearing journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender plain bearing journal boxes. 230.102... Locomotives and Tenders Running Gear § 230.102 Tender plain bearing journal boxes. Plain bearing journal boxes... expected to damage the bearing; or have a detrimental effect on the lubrication of the journal and...

  10. Identifying lubricant options for compressor bearing designs

    Science.gov (United States)

    Karnaz, J.; Seeton, C.; Dixon, L.

    2017-08-01

    Today’s refrigeration and air conditioning market is not only driven by the environmental aspects of the refrigerants, but also by the energy efficiency and reliability of system operation. Numerous types of compressor designs are used in refrigeration and air conditioning applications which means that different bearings are used; and in some cases, multiple bearing types within a single compressor. Since only one lubricant is used, it is important to try to optimize the lubricant to meet the various demands and requirements for operation. This optimization entails investigating different types of lubricant chemistries, viscosities, and various formulation options. What makes evaluating these options more challenging is the refrigerant which changes the properties of the lubricant delivered to the bearing. Once the lubricant and refrigerant interaction are understood, through various test methods, then work can start on collaborating with compressor engineers on identifying the lubricant chemistry and formulation options. These interaction properties are important to the design engineer to make decisions on the adequacy of the lubricant before compressor tests are started. This paper will discuss the process to evaluate lubricants for various types of compressors and bearing design with focus on what’s needed for current refrigerant trends. In addition, the paper will show how the lubricant chemistry choice can be manipulated through understanding of the bearing design and knowledge of interaction with the refrigerant to maximize performance. Emphasis will be placed on evaluation of synthetic lubricants for both natural and synthetic low GWP refrigerants.

  11. Nonlinear vibrations and stability of aerostatic bearing

    Directory of Open Access Journals (Sweden)

    Kozánek J.

    2008-12-01

    Full Text Available Bearings based on aerostatic principle belong to the new machine elements advantageous for low- and high-speed applications, but their dynamic and stability properties are not yet sufficiently known. This paper presents a new elaborated method and gained results of theoretical investigation of dynamic properties of aerostatic bearing in general dimensionless form. It is aimed also as a supporting tool for diagnostic and identification methods used at developing of new bearings proposed by TECHLAB, Prague for industrial applications. Mathematical model expresses nonlinear and evolutive properties in the entire area of bearing clearance, contains sufficient number of free parameters in functions of restoring and damping forces and can therefore describe all types of motions occurring in gas bearings as periodic, quasi-periodic, including beats and instability, which can leads to chaotic and self-excited vibrations. The influence of non-diagonal elements of stiffness and damping matrices of linearized model on the spectral properties and the stability of system is investigated, too.

  12. Organic Matter in Extraterrestrial Water-Bearing Salt Crystals

    Science.gov (United States)

    Chan, Q. H. S.; Zolensky, M. E.; Kebukwa, Y.; Fries, M.; Steele, A.

    2017-01-01

    Introduction: Direct samples of early Solar System fluids are present in two thermally-metamorphosed ordinary chondrite regolith breccias (Monahans (1998) [H5] and Zag [H3-6]), which were found to contain brine-bearing halite (NaCl) crystals that have been added to the regolith of an S-type asteroid following asteroidal metamorphism [1, 2]. The brine-bearing halite grains were proposed to be formed on an icy C-type asteroids (possibly Ceres), and transferred to an S-type asteroid via cryovolcanic event(s) [3]. A unique aspect of these halites is that they contain abundant organic rich solid inclusions hosted within the halites alongside the water inclusions. Methods: We analyzed in detail the compositions of the organic solids and the amino acid content of the halite crystals with two-step laser desorption/laser ionization mass spectrometry (L(sup 2) MS), Raman spectroscopy, X-ray absorption near edge structure (XANES), nanoscale secondary ion mass spectrometry (NanoSIMS), and ultra-performance liquid chromatography fluorescence detection and quadrupole time of flight hybrid mass spectrometry (UPLC-FD/QToF-MS). Results and Discussion: The L(sup 2) MS results show signatures of low-mass polyaromatic hydro-carbons (PAHs) indicated by sequences of peaks separated by 14 atomic mass units (amu) due to successive addition of methylene (CH2) groups to the PAH skeletons [4]. Raman spectra of the micron-sized solid inclusions of the halites indicate the presence of abundant and highly variable organic matter that include a mixture of short-chain aliphatic compounds and macromolecular carbon. C-XANES analysis identified C-rich areas with peaks at 285.0 eV (aromatic C=C) and 286.6 eV (vinyl-keto C=O). However, there is no 1s-sigma* exciton peak (291.7 eV) that is indicative of the development of graphene structure [5], which suggests the organics were synthesized cold. Na-noSIMS analyses show C-rich and N-rich areas that exhibit similar isotopic values with that of the IOM in

  13. Bearing tester data compilation, analysis and reporting and bearing math modeling, volume 1

    Science.gov (United States)

    Marshall, D. D.; Montgomery, E. E.; New, L. S.; Stone, M. A.; Tiller, B. K.

    1984-01-01

    Thermal and mechanical models of high speed angular contact ball bearings operating in LOX and LN2 were developed and verified with limited test data in an effort to further understand the parameters that determine or effect the SSME turbopump bearing operational characteristics and service life. The SHABERTH bearing analysis program which was adapted to evaluate shaft bearing systems in cryogenics is not capable of accommodating varying thermal properties and two phase flow. A bearing model with this capability was developed using the SINDA thermal analyzer. Iteration between the SHABERTH and the SINDA models enable the establishment of preliminary bounds for stable operation in LN2. These limits were established in terms of fluid flow, fluid inlet temperature, and axial load for a shaft speed of 30,000 RPM.

  14. Oxford phase III meniscal bearing fracture: case report.

    Science.gov (United States)

    Lim, Hong-Chul; Shon, Won-Yong; Kim, Seung-Ju; Bae, Ji-Hoon

    2014-01-01

    Meniscal bearing fracture is a rare complication of phase III Oxford unicompartmental knee replacement (UKR). We report a case of a meniscal bearing fracture that occurred 7 years after phase III Oxford medial UKR. The meniscal bearing showed uneven delamination of the polyethylene in the thinnest articular surface and an impingement lesion. This lesion initiated a fatigue crack that propagated to cause failure of the meniscal bearing. This is the first report of a meniscal bearing fracture without a posterior marker wire.

  15. Wear numbers for ball cup and journal bearings

    OpenAIRE

    Ligterink, D.J.; Moes, H.

    1980-01-01

    A wear number is defined for ball cup bearings and for journal bearings where the cup and the cylindrical bearing are made of soft material. This dimensionless wear number provides a relation between the following five quantities: the radius of the ball or the length of the journal bearing in millimetres, the wear modulus in newtons per square millimetre, the maximum wear depth rate of the cup or the cylindrical bearing in millimetres per second, the force between the mating surfaces in newto...

  16. Higher forgotten joint score for fixed-bearing than for mobile-bearing total knee arthroplasty.

    Science.gov (United States)

    Thienpont, E; Zorman, D

    2016-08-01

    To compare the postoperative subjective outcome for fixed- and mobile-bearing total knee arthroplasty (TKA) by using the forgotten joint score (FJS-12), a new patient-reported outcome score of 12 questions evaluating the potential of a patient to forget about his operated joint. The hypothesis of this study was that a mobile-bearing TKA would have a higher level of forgotten joint than a fixed-bearing model of the same design. A retrospective cohort study was conducted in 100 patients who underwent TKA at least 1 year [mean (SD) 18 (5) months] before with either a fixed-bearing (N = 50) or a mobile-bearing (N = 50) TKA from the same implant family. Clinical outcome was evaluated with the knee society score and patient-reported outcome with the forgotten joint score. No difference was observed for demographics in between both study groups. The mean (SD) postoperative FJS-12 for the fixed-bearing TKA was 71 (28) compared to a mean (SD) of 56.5 (30) for the mobile-bearing TKA. The clinical relevance of the present retrospective study is that it shows for the first time a significant difference between fixed- and mobile-bearing TKA by using a new patient-reported outcome score. The hypothesis that mobile-bearing TKA would have a higher degree of forgotten joint than a fixed-bearing TKA could not be confirmed. A level I prospective study should be set up to objectivise these findings. IV.

  17. Conceptual Design and Feasibility of Foil Bearings for Rotorcraft Engines: Hot Core Bearings

    Science.gov (United States)

    Howard, Samuel A.

    2007-01-01

    Recent developments in gas foil bearing technology have led to numerous advanced high-speed rotating system concepts, many of which have become either commercial products or experimental test articles. Examples include oil-free microturbines, motors, generators and turbochargers. The driving forces for integrating gas foil bearings into these high-speed systems are the benefits promised by removing the oil lubrication system. Elimination of the oil system leads to reduced emissions, increased reliability, and decreased maintenance costs. Another benefit is reduced power plant weight. For rotorcraft applications, this would be a major advantage, as every pound removed from the propulsion system results in a payload benefit.. Implementing foil gas bearings throughout a rotorcraft gas turbine engine is an important long-term goal that requires overcoming numerous technological hurdles. Adequate thrust bearing load capacity and potentially large gearbox applied radial loads are among them. However, by replacing the turbine end, or hot section, rolling element bearing with a gas foil bearing many of the above benefits can be realized. To this end, engine manufacturers are beginning to explore the possibilities of hot section gas foil bearings in propulsion engines. This overview presents a logical follow-on activity by analyzing a conceptual rotorcraft engine to determine the feasibility of a foil bearing supported core. Using a combination of rotordynamic analyses and a load capacity model, it is shown to be reasonable to consider a gas foil bearing core section. In addition, system level foil bearing testing capabilities at NASA Glenn Research Center are presented along with analysis work being conducted under NRA Cooperative Agreements.

  18. Trace fossils in coal-bearing sequences

    Energy Technology Data Exchange (ETDEWEB)

    Pollard, J.E.

    1988-03-01

    In the past decade trace fossils have been recorded extensively from coal-bearing sediments, differing widely in facies, age and location. Westphalian or Stephanian 'coal-measures' in Britain, Europe and Eastern Canada contain an ichnofauna produced by invertebrates and/or vertebrates in upper delta plain sediments. This contrasts with the marine-related lower delta plain ichnofaunas known from Pennsylvanian rocks of the United States and Permian Gondwana 'coal-measures' of South Africa. Deltaic complexes of Middle Jurassic age in the North Sea basin and Upper Cretaceous age in North America contain marine trace fossils and dinosaur footprints in coastal coal- bearing facies. These case histories illustrate the importance of trace fossils both in facies analysis of coal-bearing sequences and in recording the presence of animals rarely known as body fossils in such clastic sediments. 80 refs., 5 figs.

  19. High Performance Magnetic Bearings for Aero Applications

    Science.gov (United States)

    Allaire, P. E.; Knospe, C. R.; Williams, R. D.; Lewis, D. W.; Barrett, L. E.; Maslen, E. H.; Humphris, R. R.

    1997-01-01

    Several previous annual reports were written and numerous papers published on the topics for this grant. That work is not repeated here in this final report. Only the work completed in the final year of the grant is presented in this final report. This final year effort concentrated on power loss measurements in magnetic bearing rotors. The effect of rotor power losses in magnetic bearings are very important for many applications. In some cases, these losses must be minimized to maximize the length of time the rotating machine can operate on a fixed energy or power supply. Examples include aircraft gas turbine engines, space devices, or energy storage flywheels. In other applications, the heating caused by the magnetic bearing must be removed. Excessive heating can be a significant problem in machines as diverse as large compressors, electric motors, textile spindles, and artificial heart pumps.

  20. STABILITY OF ROTOR-BEARING SYSTEMS

    Directory of Open Access Journals (Sweden)

    Uğur YÜCEL

    2003-03-01

    Full Text Available In various industrial applications there is a need for higher speed, yet reliably operating rotating machinery. A key factor in achieving this type of machinery continues to be the ability to accurately predict the dynamic response and stability of a rotor-bearing system. This paper introduces and explains the nature of rotordynamic phenomena from comparatively simple analytic models. Starting with the most simple rotor model that is supported in two rigid bearings at its ends, the more realistic and more involved cases are considered by incorporating the effects of flexible bearings. Knowledge of these phenomena is fundamental to an understanding of the behavior of complex models, which corresponds to the real rotors of turbomachines.

  1. Hydrolyzable polyureas bearing hindered urea bonds.

    Science.gov (United States)

    Ying, Hanze; Cheng, Jianjun

    2014-12-10

    Hydrolyzable polymers are widely used materials that have found numerous applications in biomedical, agricultural, plastic, and packaging industrials. They usually contain ester and other hydrolyzable bonds, such as anhydride, acetal, ketal, or imine, in their backbone structures. Here, we report the first design of hydrolyzable polyureas bearing dynamic hindered urea bonds (HUBs) that can reversibly dissociate to bulky amines and isocyanates, the latter of which can be further hydrolyzed by water, driving the equilibrium to facilitate the degradation of polyureas. Polyureas bearing 1-tert-butyl-1-ethylurea bonds that show high dynamicity (high bond dissociation rate), in the form of either linear polymers or cross-linked gels, can be completely degraded by water under mild conditions. Given the simplicity and low cost for the production of polyureas by simply mixing multifunctional bulky amines and isocyanates, the versatility of the structures, and the tunability of the degradation profiles of HUB-bearing polyureas, these materials are potentially of very broad applications.

  2. Demography of the Yellowstone grizzly bears

    Science.gov (United States)

    Pease, C.M.; Mattson, D.J.

    1999-01-01

    We undertook a demographic analysis of the Yellowstone grizzly bears (Ursus arctos) to identify critical environmental factors controlling grizzly bear vital rates, and thereby to help evaluate the effectiveness of past management and to identify future conservation issues. We concluded that, within the limits of uncertainty implied by the available data and our methods of data analysis, the size of the Yellowstone grizzly bear population changed little from 1975 to 1995. We found that grizzly bear mortality rates are about double in years when the whitebark pine crop fails than in mast years, and that the population probably declines when the crop fails and increases in mast years. Our model suggests that natural variation in whitebark pine crop size over the last two decades explains more of the perceived fluctuations in Yellowstone grizzly population size than do other variables. Our analysis used demographic data from 202 radio-telemetered bears followed between 1975 and 1992 and accounted for whitebark pine (Pinus albicaulis) crop failures during 1993-1995. We used a maximum likelihood method to estimate demographic parameters and used the Akaike Information Criteria to judge the significance of various independent variables. We identified no independent variables correlated with grizzly bear fecundity. In order of importance, we found that grizzly bear mortality rates are correlated with season, whitebark pine crop size (mast vs. nonmast year), sex, management-trapping status (never management-trapped vs. management-trapped once or more), and age. The mortality rate of bears that were management-trapped at least once was almost double that of bears that were never management-trapped, implying a source/sink (i.e., never management-trapped/management-trapped) structure. The rate at which bears move between the source and sink, estimated as the management-trapping rate (h), is critical to estimating the finite rate of increase, I>I?. We quantified h by

  3. The ultimate bearing capacity of ice beams

    Directory of Open Access Journals (Sweden)

    Li Liang

    2013-02-01

    Full Text Available It is usually proposed that bearing capacity of the ice beam during its interaction with a sloping hydraulic structure is exhausted when tensile stresses in the beam’s cross-section reach some limit. But besides the tensile stress there is a compressive stress during the interaction with a sloping structure. This can change our estimations of the ultimate bearing capacity and load exerted on the structure. The purpose of the study was to estimate influence of the longitudinal compressive stress on the ice beam’s ultimate bearing capacity. The solution was obtained with the program complex LS-DYNA. Results of the mathematical modeling were compared with data of physical experiments conducted by Sodhi. Good correlation of the results gave possibility to conduct wide numerical experiments and to suggest corrections to the existing methodology.

  4. Powder metallurgy bearings for advanced rocket engines

    Science.gov (United States)

    Fleck, J. N.; Killman, B. J.; Munson, H.E.

    1985-01-01

    Traditional ingot metallurgy was pushed to the limit for many demanding applications including antifriction bearings. New systems require corrosion resistance, better fatigue resistance, and higher toughness. With conventional processing, increasing the alloying level to achieve corrosion resistance results in a decrease in other properties such as toughness. Advanced powder metallurgy affords a viable solution to this problem. During powder manufacture, the individual particle solidifies very rapidly; as a consequence, the primary carbides are very small and uniformly distributed. When properly consolidated, this uniform structure is preserved while generating a fully dense product. Element tests including rolling contact fatigue, hot hardness, wear, fracture toughness, and corrosion resistance are underway on eleven candidate P/M bearing alloys and results are compared with those for wrought 440C steel, the current SSME bearing material. Several materials which offer the promise of a significant improvement in performance were identified.

  5. Robust Bearing Estimation for 3-Component Stations

    Energy Technology Data Exchange (ETDEWEB)

    Claassen, John P.

    1999-06-03

    A robust bearing estimation process for 3-component stations has been developed and explored. The method, called SEEC for Search, Estimate, Evaluate and Correct, intelligently exploits the in- herent information in the arrival at every step of the process to achieve near-optimal results. In particular, the approach uses a consistent framework to define the optimal time-frequency windows on which to make estimates, to make the bearing estimates themselves, to construct metrics helpful in choosing the better estimates or admitting that the bearing is immeasurable, andjinally to apply bias corrections when calibration information is available to yield a single final estimate. The method was applied to a small but challenging set of events in a seismically active region. The method demonstrated remarkable utility by providing better estimates and insights than previously available. Various monitoring implications are noted fiom these findings.

  6. Robust bearing estimation for 3-component stations

    Energy Technology Data Exchange (ETDEWEB)

    CLAASSEN,JOHN P.

    2000-02-01

    A robust bearing estimation process for 3-component stations has been developed and explored. The method, called SEEC for Search, Estimate, Evaluate and Correct, intelligently exploits the inherent information in the arrival at every step of the process to achieve near-optimal results. In particular the approach uses a consistent framework to define the optimal time-frequency windows on which to make estimates, to make the bearing estimates themselves, to construct metrics helpful in choosing the better estimates or admitting that the bearing is immeasurable, and finally to apply bias corrections when calibration information is available to yield a single final estimate. The algorithm was applied to a small but challenging set of events in a seismically active region. It demonstrated remarkable utility by providing better estimates and insights than previously available. Various monitoring implications are noted from these findings.

  7. Experimental investigations of active air bearings

    DEFF Research Database (Denmark)

    Santos, Ilmar; Morosi, Stefano

    2012-01-01

    Along with traditional oil lubrication, increasing demand for high-speed applications has renewed attention to gas bearings technology. Traditional aerostatic and aerodynamic gas lubrication has been widely used in a variety of applications, ranging from high-speed spindles to micro and meso......-scale turbomachinery. The present paper deals with experimental rotordynamic testing of a flexible rotor supported by hybrid aerostaticaerodynamic gas journal bearing equipped with an electronic radial air injection system. From a rotordynamic point of view there are two phenomena that limit the widespread...... of traditional gas lubrication: 1) Low damping makes operation across critical speed dangerous, as even low level of unbalance can generate large vibration responses. This is especially problematic for gas bearing applications, which often operate in the supercritical region. Moreover, 2) An upper bound...

  8. Bear bile: dilemma of traditional medicinal use and animal protection

    Directory of Open Access Journals (Sweden)

    Nagamatsu Tadashi

    2009-01-01

    Full Text Available Abstract Bear bile has been used in Traditional Chinese Medicine (TCM for thousands of years. Modern investigations showed that it has a wide range of pharmacological actions with little toxicological side effect and the pure compounds have been used for curing hepatic and biliary disorders for decades. However, extensive consumption of bear bile made bears endangered species. In the 1980's, bear farming was established in China to extract bear bile from living bears with "Free-dripping Fistula Technique". Bear farming is extremely inhumane and many bears died of illness such as chronic infections and liver cancer. Efforts are now given by non-governmental organizations, mass media and Chinese government to end bear farming ultimately. At the same time, systematic research has to be done to find an alternative for bear bile. In this review, we focused on the literature, laboratory and clinical results related to bear bile and its substitutes or alternative in English and Chinese databases. We examined the substitutes or alternative of bear bile from three aspects: pure compounds derived from bear bile, biles from other animals and herbs from TCM. We then discussed the strategy for stopping the trading of bear bile and issues of bear bile related to potential alternative candidates, existing problems in alternative research and work to be done in the future.

  9. Grouted Pile and Its Bearing Capacity

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    The grouting method applied in bored pile is an improvement to the conventional bored pile. Load tests have proved that grouting under the bored pile tip is an effective method to enhance the bearing capacity of the pile and to reduce the pile settlement. In this paper, the grouting technology is described and pile-load test results are discussed. In order to put the grouting method into design practice, the authors analyze the working mechanism of soil compaction. And, based on the theory of cavities expansion in soil mass, approximate formulae are proposed for estimating the bearing capacity of the grouted pile. The theoretical prediction agrees well with the load test results.

  10. Wear Analysis of Wind Turbine Gearbox Bearings

    Energy Technology Data Exchange (ETDEWEB)

    Blau, Peter Julian [ORNL; Walker, Larry R [ORNL; Xu, Hanbing [ORNL; Parten, Randy J [ORNL; Qu, Jun [ORNL; Geer, Tom [ORNL

    2010-04-01

    The objective of this effort was to investigate and characterize the nature of surface damage and wear to wind turbine gearbox bearings returned from service in the field. Bearings were supplied for examination by S. Butterfield and J. Johnson of the National Wind Technology Center (NREL), Boulder, Colorado. Studies consisted of visual examination, optical and electron microscopy, dimensional measurements of wear-induced macro-scale and micro-scale features, measurements of macro- and micro-scale hardness, 3D imaging of surface damage, studies of elemental distributions on fracture surfaces, and examinations of polished cross-sections of surfaces under various etched and non-etched conditions.

  11. Coated Conductors for the Magnetic Bearing Application

    Science.gov (United States)

    Sass, Felipe; Dias, Daniel Henrique Nogueira; Sotelo, Guilherme Gonçalves; Júnior, Rubens de Andrade

    The second generation (2G) of superconductor wires have been considered for several applications lately. This work presents a preliminary study of superconducting magnetic bearings (SMB) using 2G wires as passive levitators. A superconducting block using stacked 2G wires was built to evaluate the magnetic bearing behavior, thought levitation force measurements, when a permanent magnet cylinder approaches or moves away from the block. The superconducting block was compared with an YBCO bulk with nearly the same dimensions and the results show a promising potential for this application.

  12. Cavitation wear resistance of engine bearing materials

    Science.gov (United States)

    Rac, Aleksandar

    1994-04-01

    The resistance to cavitation erosion of aluminum alloy, and cast and sinte-red lead-bronze, materials which are most frequently used for engine bearings, has been evaluated. The tests were carried out in motor oil at a temperature of 80 C, using a magnetostrictive vibratory tester (20 kHz). The results showed that the cavitation erosion resistance was the greatest in cast lead-bronze. On the contrary, sintered lead-bronze, though of the same chemical composition, had the greatest erosion rate. Additionally, the investigation of the overlay plated bearings showed the overlay was nonresistive to this type of wear.

  13. Grizzly bear habitat selection is scale dependent.

    Science.gov (United States)

    Ciarniello, Lana M; Boyce, Mark S; Seip, Dale R; Heard, Douglas C

    2007-07-01

    The purpose of our study is to show how ecologists' interpretation of habitat selection by grizzly bears (Ursus arctos) is altered by the scale of observation and also how management questions would be best addressed using predetermined scales of analysis. Using resource selection functions (RSF) we examined how variation in the spatial extent of availability affected our interpretation of habitat selection by grizzly bears inhabiting mountain and plateau landscapes. We estimated separate models for females and males using three spatial extents: within the study area, within the home range, and within predetermined movement buffers. We employed two methods for evaluating the effects of scale on our RSF designs. First, we chose a priori six candidate models, estimated at each scale, and ranked them using Akaike Information Criteria. Using this method, results changed among scales for males but not for females. For female bears, models that included the full suite of covariates predicted habitat use best at each scale. For male bears that resided in the mountains, models based on forest successional stages ranked highest at the study-wide and home range extents, whereas models containing covariates based on terrain features ranked highest at the buffer extent. For male bears on the plateau, each scale estimated a different highest-ranked model. Second, we examined differences among model coefficients across the three scales for one candidate model. We found that both the magnitude and direction of coefficients were dependent upon the scale examined; results varied between landscapes, scales, and sexes. Greenness, reflecting lush green vegetation, was a strong predictor of the presence of female bears in both landscapes and males that resided in the mountains. Male bears on the plateau were the only animals to select areas that exposed them to a high risk of mortality by humans. Our results show that grizzly bear habitat selection is scale dependent. Further, the

  14. Solid state physics

    CERN Document Server

    Burns, Gerald

    2013-01-01

    Solid State Physics, International Edition covers the fundamentals and the advanced concepts of solid state physics. The book is comprised of 18 chapters that tackle a specific aspect of solid state physics. Chapters 1 to 3 discuss the symmetry aspects of crystalline solids, while Chapter 4 covers the application of X-rays in solid state science. Chapter 5 deals with the anisotropic character of crystals. Chapters 6 to 8 talk about the five common types of bonding in solids, while Chapters 9 and 10 cover the free electron theory and band theory. Chapters 11 and 12 discuss the effects of moveme

  15. Theoretical solid state physics

    CERN Document Server

    Haug, Albert

    2013-01-01

    Theoretical Solid State Physics, Volume 1 focuses on the study of solid state physics. The volume first takes a look at the basic concepts and structures of solid state physics, including potential energies of solids, concept and classification of solids, and crystal structure. The book then explains single-electron approximation wherein the methods for calculating energy bands; electron in the field of crystal atoms; laws of motion of the electrons in solids; and electron statistics are discussed. The text describes general forms of solutions and relationships, including collective electron i

  16. Xenoestrogenic and dioxin-like activity in blood of East Greenland polar bears (Ursus maritimus).

    Science.gov (United States)

    Erdmann, Simon E; Dietz, Rune; Sonne, Christian; Bechshøft, Thea Ø; Vorkamp, Katrin; Letcher, Robert J; Long, Manhai; Bonefeld-Jørgensen, Eva C

    2013-07-01

    The aims of the project were to (i) extract the lipophilic persistent organic pollutants (POPs) from the blood of 99 East Greenland polar bears and assess the combined mixture effect on the estrogen receptor (ER) and the aryl hydrocarbon receptor (AhR) mediated transactivity; (ii) To evaluate whether the receptor transactivities were associated with selected POP markers, and (iii) compare the receptor transactivities in polar bears with earlier studies on Greenlandic Inuit. Lipophilic POPs were extracted using a combination of solid-phase extraction (SPE) and high performance liquid chromatography (HPLC). ER mediated transactivity was determined using the ER luciferase reporter MVLN cell assay. The extracts were tested alone (XER) and together with 17β-estradiol (E2) as a physiological mimic (XERcomp). Dioxins and dioxin-like (DL) compounds were extracted by a combination of SPE and the Supelco Dioxin Prep System®. AhR mediated dioxin-like transactivity was determined using the AhR luciferase reporter Hepa 1.12cR cell assay. Agonistic ER transactivity was elicited by 19% of the samples, and a further increased E2 induced ER response was found for 52%, whereas 17% antagonized the E2 induced ER response. Positive correlations were found in subadult bears between XER and several POP biomarkers. XER and XERcomp correlated positively to each other. A total of 91% of the polar bear blood extracts elicited agonistic AhR transactivity. The AhR-TCDD equivalent (AhR-TEQ) median levels were higher among adult bears compared to subadult bears, but not significantly.

  17. Bear Creek Valley Floodplain Hot Spot Removal Action Project Plan, Oak Ridge Y-12 Plant, Oak Ridge, Tennessee

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    The Bear Creek Valley Floodplain Hot Spot Removal Action Project Plan, Oak Ridge Y-12 Plant, Oak Ridge, Tennessee (Y/ER-301) was prepared (1) to safely, cost-effectively, and efficiently evaluate the environmental impact of solid material in the two debris areas in the context of industrial land uses (as defined in the Bear Creek Valley Feasibility Study) to support the Engineering Evaluation/Cost Assessment and (2) to evaluate, define, and implement the actions to mitigate these impacts. This work was performed under Work Breakdown Structure 1.x.01.20.01.08.

  18. Efficacy of lidocaine solid lipid nanoparticles for sciatic nerve blockade in rats%利多卡因固体脂质纳米粒剂型用于大鼠坐骨神经阻滞的效果

    Institute of Scientific and Technical Information of China (English)

    冷福建; 李娜; 叶小丰; 张丽霞; 余凌

    2014-01-01

    Objective To evaluate the efficacy of lidocaine solid lipid nanoparticles (L-SLNs) for sciatic nerve blockade in rats.Methods Lidocaine-loaded SLNs were prepared using high pressure homogenization.Ninety SPF male Wistar rats,weighing 220-280 g,were randomized into 6 groups (n =15 each) using a random number table:control group (group C),1% L-SLN group (group L1-SLN),1% lidocaine group (group L1),2% L-SLN group (group L2-SLN),2% lidocaine group (group L2),and blank SLN group (group SLN).In C,L1-SLN,L1,L2-SLN,L2 and SLN groups,normal saline,1% lidocaine SLN,1% lidocaine,2% lidocaine SLN,2% lidocaine and blank SLN (200 μl) were injected,respectively,around the sciatic nerve.Before sciatic nerve blockade (baseline) and at 10,20,30,60,120,180,240,300,360,420,480,540 and 600 min after blockade,the paw withdraw latency to a thermal stimulus was measured,and maximum possible effect (MPE) was calculated to reflect the degree of sensory block.Before sciatic nerve blockade and at 10,20,30,60,120 and 150 min after blockade,extensor postural thrust (EPT) of the hind limbs was detected to reflect the degree of motor block.The sciatic nerve at the injection site and the tissues around the site were obtained for observation of the pathological changes at 2 days and 1 and 4 weeks after blockade.Results Compared with the baseline value before blockade and group C,the MPE was significantly increased in at 10-30 min after blockade group L1,at 10-60 min after blockade in group L2,at 10-360 min after blockade in group L1-SLN,and at 10-540 min after blockade in group L2-SLN,and the EPT was decreased at 10-30 min after blockade in group L1,at 10-60 min after blockade in group L2 and group L1-SLN,and at 10-90 min after blockade in group L2-SLN.Compared with group L1,the MPE was significantly decreased at 10 min after blockade,no significant change was found at 20-30 min after blockade,and the MPE was increased at 60-360 min after blockade,and the EPT was increased at 10

  19. Dynamic Analysis of a Rotor-Bearing-SFD System with the Bearing Inner Race Defect

    Directory of Open Access Journals (Sweden)

    Junhong Zhang

    2017-01-01

    Full Text Available In this paper, the dynamic behavior of a rotor-bearing-SFD system with the inner race defect of bearing is investigated. The contact force between the rolling element and the race is calculated in Hertzian contact and elastohydrodynamic lubrication condition. The supporting force of the SFD is simulated by integrating the pressure distribution derived from Reynolds’s equation. The equations of motion of the rotor-bearing-SFD system are derived and solved using the fourth-order Runge-Kutta method. The dynamic behavior and the fault characteristics are analyzed with two configurations of the SFD: (1 mounted on the unfaulted bearing and (2 mounted on the faulty bearing. According to the analysis of time-frequency diagram, waterfall plot, and spectral diagram, the results show that the characteristics of inner race defects on bearing frequencies are related to the characteristic multiple frequency of the inner race defect and the fundamental frequency. The speed and defect width have different influence on the distribution and amplitude of frequency. The SFD can enhance the system stability under the bearing fault but the enhancement decreases with the increasing speed. Meanwhile, the beneficial effect of the SFD varies according to the mounted position in the rotor system.

  20. Impact of Fixed-Bearing and Mobile-Bearing Tibial Insert in Unicondylar Knee Arthroplasty

    Directory of Open Access Journals (Sweden)

    Mehmet Faruk Çatma

    2016-06-01

    Full Text Available INTRODUCTION: The aim of the study is to investigate the impact of fixed or mobile-bearing tibial inserts on patellofemoral arthrosis and evaluate which one to be preferred for patients with patellofemoral arthrosis. METHODS: Operated in our clinic between January 2009 and February 2013, 33 with patellofemoral arthritis together with anteromedial compartment arthritis were included in the study. Patellofemoral joints of patients were evaluated according to the scoring system defined by Fulkerson-Shea. RESULTS: Unicondylar knee arthroplasty with fixed-bearing tibial insertsand 22 (66,6% (male: 3, female: 19 and unicondylar knee arthroplasty with mobile-bearing tibial inserts 11 (33,9 % (male: 2, female: 9 were implanted.Average knee flexion was found to be 116,5 (100-135 degrees in 22 patients with mobile-bearing tibial inserts, and 114,5 (95-135 in 11 patients with fixed-bearing tibial inserts. DISCUSSION AND CONCLUSION: Patellofemoral arthrosis is an important factor for unicondylar knee arthroplasty prognosis and one of the determinants of patient satisfaction. Significantly less patellofemoral complaints were seen with UKA with fixed-bearing tibial insert compared to mobile-bearing tibial insert.

  1. Local Attitudes towards Bear Management after Illegal Feeding and Problem Bear Activity

    Directory of Open Access Journals (Sweden)

    David Fraser

    2013-09-01

    Full Text Available The “pot bears” received international media attention in 2010 after police discovered the intentional feeding of over 20 black bears during the investigation of an alleged marijuana-growing operation in Christina Lake, British Columbia, Canada. A two-phase random digit dialing survey of the community was conducted in 2011 to understand local perspectives on bear policy and management, before and after a summer of problem bear activity and government interventions. Of the 159 households surveyed in February 2011, most had neutral or positive attitudes towards bears in general, and supported the initial decision to feed the food-conditioned bears until the autumn hibernation. In contrast to wildlife experts however, most participants supported relocating the problem bears, or allowing them to remain in the area, ahead of killing; in part this arose from notions of fairness despite the acknowledged problems of relocation. Most locals were aware of the years of feeding but did not report it, evidently failing to see it as a serious form of harm, even after many bears had been killed. This underscores the importance of preventive action on wildlife feeding and the need to narrow the gap between public and expert opinion on the likely effects of relocation versus killing.

  2. Lubricant replacement in rolling element bearings for weapon surety devices

    Energy Technology Data Exchange (ETDEWEB)

    Steinhoff, R.; Dugger, M.T.; Varga, K.S. [Sandia National Laboratories, Albuquerque, NM (United States)

    1996-05-01

    Stronglink switches are a weapon surety device that is critical to the nuclear safety theme in modem nuclear weapons. These stronglink switches use rolling element bearings which contain a lubricant consisting of low molecular weight polytetrafluoroethylene (PTFE) fragments. Ozone-depleting solvents are used in both the manufacture and application of this lubricant. An alternate bearing lubrication for stronglink switches is needed that will provide long-term chemical stability, low migration and consistent performance. Candidates that were evaluated include bearings with sputtered MoS{sub 2} on the races and retainers, bearings with TiC-coated balls, and bearings with Si{sub 3}N{sub 4} balls and steel races. These candidates were compared to the lubricants currently used which are bearings lubricated with PTFE fragments of low molecular weight in a fluorocarbon solvent. The candidates were also compared to bearings lubricated with a diester oil which is representative of bearing lubricants used in industrial applications. Evaluation consisted of cycling preloaded bearings and subjecting them to 23 gRMS random vibration. All of the candidates are viable substitutes for low load application where bearing preload is approximately 1 pound. For high load applications where the bearing preload is approximately 10 pounds, bearings with sputtered MoS{sub 2} on the races and retainers appear to be the best substitutes. Bearings with TiC-coated balls also appear to be a viable candidate but these bearings did not perform as well as the sputtered MoS{sub 2}.

  3. A Hydrostatic Bearing Test System for Measuring Bearing Load Using Magnetic-Fluid Lubricants.

    Science.gov (United States)

    Weng, Huei Chu; Chen, Lu-Yu

    2016-05-01

    This paper conducts a study on the design of a hydrostatic bearing test system. It involves the determination of viscous properties of magnetic-fluid lubricants. The load of a hydrostatic thrust bearing using a water-based magnetite nanofluid of varying volume flow rate is measured under an applied external induction field via the test system. Results reveal that the presence of nanoparticles in a carrier liquid would cause an enhanced bearing load. Such an effect could be further magnified by increasing the lubricant volume flow rate or the external induction field strength.

  4. NANO-BEARING: THE DESIGN OF A NEW TYPE OF AIR BEARING WITH FLEXURE STRUCTURE

    Institute of Scientific and Technical Information of China (English)

    KO Pui Hang; DU Ruxu

    2007-01-01

    A new type of air bearing with flexure structure is introduced. The new bearing is designed for precision mechanical engineering devices such as mechanical watch movement. The new design uses the flexure structure to provide 3D damping to absorb shocks from all directions. Two designs are presented: one has 12 T-shape slots in the radian direction while the other has 8 spiral slots in the radian direction. Both designs have flexure mountings on the axial directions. Based on the finite element analysis (FEA), the new bearing can reduce the vibration (displacement) by as much as 8.37% and hence, can better protect the shafts.

  5. Tests of Lead-bronze Bearings in the DVL Bearing-testing Machine

    Science.gov (United States)

    Fischer, G

    1940-01-01

    The lead-bronze bearings tested in the DVL machine have proven themselves very sensitive to load changes as in comparison with bearings of light metal. In order to prevent surface injuries and consequently running interruptions, the increase of the load has to be made in small steps with sufficient run-in time between steps. The absence of lead in the running surface, impurities in the alloy (especially iron) and surface irregularities (pores) decreases the load-carrying capacity of the bearing to two or three times that of the static load.

  6. What Are Solid Fats?

    Science.gov (United States)

    ... fatty acids. Most solid fats are high in saturated fats and/or trans fats and have less monounsaturated ... Animal products containing solid fats also contain cholesterol. Saturated fats and trans fats tend to raise "bad" (LDL) ...

  7. Fault Tolerant Magnetic Bearing for Turbomachinery

    Science.gov (United States)

    Choi, Benjamin; Provenza, Andrew

    2001-01-01

    NASA Glenn Research Center (GRC) has developed a Fault-Tolerant Magnetic Bearing Suspension rig to enhance the bearing system safety. It successfully demonstrated that using only two active poles out of eight redundant poles from each radial bearing (that is, simply 12 out of 16 poles dead) levitated the rotor and spun it without losing stability and desired position up to the maximum allowable speed of 20,000 rpm. In this paper, it is demonstrated that as far as the summation of force vectors of the attracting poles and rotor weight is zero, a fault-tolerant magnetic bearing system maintained the rotor at the desired position without losing stability even at the maximum rotor speed. A proportional-integral-derivative (PID) controller generated autonomous corrective actions with no operator's input for the fault situations without losing load capacity in terms of rotor position. This paper also deals with a centralized modal controller to better control the dynamic behavior over system modes.

  8. Horizontal Air Bearing Experiment Number 1

    Energy Technology Data Exchange (ETDEWEB)

    Clauson, T.L.

    1999-08-31

    The Horizontal Air Bearing Experiment No.1 is a series of tests intended to further the understanding of rotational dynamics. A simple experimental assembly is rotated using the Horizontal Air Bearing and allowed to spin freely as the internal rotational damping is measured. The low friction of the bearing effectively isolates the test assembly, allowing the internal damping of the test object to be evaluated. The experimental assembly is composed of an aluminum ball within a spherical cavity. A flanged pipe section and an auxiliary adapter plate secure the assembly to the Air Bearing interface plate. Three aluminum balls are interchanged to vary test parameters. The aluminum balls are free to move independently as the entire assembly rotates. The aluminum balls vary in diameter and/or surface finish. While the diameter and surface finish is varied, the space between the ball and socket is dry. To examine the effect of viscosity, the space is filled with a lubricant while the ball diameter and surface finish is held constant.

  9. The economics of roadside bear viewing

    Science.gov (United States)

    Richardson, Leslie; Rosen, Tatjana; Gunther, Kerry; Schwartz, Chuck

    2014-01-01

    Viewing bears along roadside habitats is a popular recreational activity in certain national parks throughout the United States. However, safely managing visitors during traffic jams that result from this activity often requires the use of limited park resources. Using unique visitor survey data, this study quantifies economic values associated with roadside bear viewing in Yellowstone National Park, monetary values that could be used to determine whether this continued use of park resources is warranted on economic grounds. Based on visitor expenditure data and results of a contingent visitation question, it is estimated that summer Park visitation would decrease if bears were no longer allowed to stay along roadside habitats, resulting in a loss of 155 jobs in the local economy. Results from a nonmarket valuation survey question indicate that on average, visitors to Yellowstone National Park are willing to pay around $41 more in Park entrance fees to ensure that bears are allowed to remain along roads within the Park. Generalizing this value to the relevant population of visitors indicates that the economic benefits of allowing this wildlife viewing opportunity to continue could outweigh the costs of using additional resources to effectively manage these traffic jams.

  10. On Controllable Elastohydrodynamic Fluid Film Bearings

    DEFF Research Database (Denmark)

    Haugaard, Martin Asger

    This thesis gives a theoretical description of the active tilting-pad journal bearing (ATPJB). It provides the qualified reader with the tools to model an ATPJB, while staying clear of pitfalls. The model is based on well known techniques and allows for local stability analyses, harmonic stationa...

  11. Heavy Bearings Exploitation Energy and Reduction Methods

    Science.gov (United States)

    Szekely, V. G.; Cioară, R.

    2016-11-01

    The global trend of resource conservation so as “not to compromise the ability of future generation's development” is the fundamental basis of the concept of sustainable development. Concordant with this, the energy efficiency of products is increasingly discussed and frequently taken into account in the design stage. In more cases a product is more appreciated and more attractive as the energy consumption and its associated materials are lower. In the production stage, said consumption advantages primarily the manufacturer, particularly through low consumption thereof. In the operational phase, low energy and materials consumption represents an user advantage and it's a major argument in the decision to purchase and use a particular product. Heavy bearings are frequent products used in wind turbines that are producing non-conventional “clean” energy, as windmills. An enhanced energy efficiency bearing contributes to the enhancement of the overall efficiency of the wind turbines. Based on a suitable mathematical model, this paper identifies and recommends courses of action to reduce the operating energy of heavy bearing through the “cage” - which is the subject of a much larger research - with the highest priority. The identified actions may constitute from a set of requirements for the design stage of the heavy bearing predominantly oriented towards innovation-invention.

  12. Angular-momentum-bearing modes in fission

    Energy Technology Data Exchange (ETDEWEB)

    Moretto, L.G.; Peaslee, G.F.; Wozniak, G.J.

    1989-03-01

    The angular-momentum-bearing degrees of freedom involved in the fission process are identified and their influence on experimental observables is discussed. The excitation of these modes is treated in the ''thermal'' limit, and the resulting distributions of observables are calculated. Experiments demonstrating the role of these modes are presented and discussed. 61 refs., 12 figs.

  13. Load Bearing Equipment for Bone and Muscle

    Science.gov (United States)

    Shackelford, Linda; Griffith, Bryan

    2015-01-01

    Resistance exercise on ISS has proven effective in maintaining bone mineral density and muscle mass. Exploration missions require exercise with similar high loads using equipment with less mass and volume and greater safety and reliability than resistance exercise equipment used on ISS (iRED, ARED, FWED). Load Bearing Equipment (LBE) uses each exercising person to create and control the load to the partner.

  14. Ball bearing measurement with white light interferometry

    Science.gov (United States)

    Schmit, Joanna; Han, Sen; Novak, Erik

    2009-06-01

    Requirements on high-performance of ball bearings in terms of the loads they experience and their reliability are increasing as the automotive, aerospace, and power generation industries look to cut costs, reduce emissions, and improve efficiency. Most bearings are evaluated with a stylus profiler or with a bright field scopes or microscopes for form, roughness, and defect classification. Two-dimensional stylus measurements captures only very localized surface profiles unless multiple scans are performed which slow the measurement time unacceptably; this leads to inadequate sampling and sometimes greatly varying results based on location and directionality of the line scan. Bright field microscopes deliver only the lateral information about defects but not their depth, volume or surface roughness. White light interferometry can be very successfully utilized in the measurement of full field form, roughness and defect detection and is gaining adoption. They provide rapid, accurate, three-dimensional imaging compatible with the newly developed ISO 3D surface parameters which are expected to rapidly displace traditional 2D metrics. These surface parameters allow for better characterization of surface structure and better understanding of the production process and bearing and race wear. New 3D filtering techniques allow effective separation of form, waviness, and roughness for highly accurate and repeatable bearing qualification.

  15. MAGNETIC FLUID BEARINGS OF MINING EQUIPMENT

    Directory of Open Access Journals (Sweden)

    I. Gorlov

    2012-01-01

    Full Text Available The paper considers a problem pertaining to selection friction pair materials for plain bearings of mining equipment which are lubricated with  nano-dispersed magnetic oil. Methodology for equipment tests, technology for obtaining new anti-friction materials (polymer, ceramic, amorphous and investigation results are presented in the paper.

  16. Load-Bearing Capacity of Roof Trusses

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Damkilde, Lars; Munch-Andersen, J.

    2004-01-01

    systems such as roof trusses are established and statistical characteristics of the load bearing capacity are determined. The results show that there is a significant increase in the characteristic (nominal) value and a reduction in the coefficient of variation (COV) for typical loads such as permanent...

  17. Extended Life Testing of Duplex Ball Bearings

    Science.gov (United States)

    Mobley, Jeffrey; Robertson, Michael; Hodges, Charles

    2016-01-01

    Sierra Nevada Corporation’s Space Systems performed bearing life testing for the Scan Mirror Motor/Encoder Assembly (SMMA), part of the Scan Mirror Assembly on-board the Aerosol Polarimetry Sensor (APS) on the NASA Glory Spacecraft. The baseline bearing life test duration extended beyond the launch date for the Glory Spacecraft; a risk that the program was willing to undertake with the understanding that if any anomalies or failures occurred before the required life was achieved, then the mission objectives or operating profile could be modified on orbit to take those results into account. Even though the Glory Spacecraft failed to reach orbit during its launch in March of 2011, the bearing life testing was continued through a mutual understanding of value between Sierra Nevada Corporation and our customer; with a revised goal of testing to failure rather than completing a required number of life cycles. Life testing thus far has not only exceeded the original mission required life, but has also exceeded the published test data for Cumulative Degradation Factor (CDF) from NASA/CR-2009-215681. Many lessons were learned along the way regarding long life testing. The bearing life test has been temporarily suspended due to test support equipment issues.

  18. Bearings and Seals. FOS: Fundamentals of Service.

    Science.gov (United States)

    John Deere Co., Moline, IL.

    This manual on bearings and seals is one of a series of power mechanics texts and visual aids for use in training for the servicing of automotive and off-the-road farm and industrial machines. Materials provide basic information and illustrations for use by vocational students and teachers as well as shop servicemen and laymen. Focusing on…

  19. Active Magnetic Bearings. Postgraduate Seminar on Electromechanics

    Energy Technology Data Exchange (ETDEWEB)

    Lantto, E.; Tommila, V.; Arkkio, A.

    2007-07-01

    The papers in the seminar on electromagnetics are published only as power point slides. The titles of the different papers are: Introduction to magnetic bearings, Magnetic field and forces, Actuators, amplifiers and sensors, System theory, rotordynamics and control, Diagnostics, applications and standardisation.

  20. Annular Pressure Seals and Hydrostatic Bearings

    Science.gov (United States)

    2006-11-01

    affecting the rotordynamics of liquid turbopumps, in particular those handling large density fluids. Highlights on the bulk-flow analysis of annular seals... rotordynamic stability. Hydrostatic bearings rely on external fluid pressurization to generate load support and large centering stiffnesses, even in...SEALS IN PUMP APPLICATIONS Seal rotordynamic characteristic have a primary influence on the stability response of high-performance turbomachinery [1

  1. Linking Microbial Activity with Arsenic Fate during Cow Dung Disposal of Arsenic-Bearing Wastes

    Science.gov (United States)

    Clancy, T. M.; Reddy, R.; Tan, J.; Hayes, K. F.; Raskin, L.

    2014-12-01

    To address widespread arsenic contamination of drinking water sources numerous technologies have been developed to remove arsenic. All technologies result in the production of an arsenic-bearing waste that must be evaluated and disposed in a manner to limit the potential for environmental release and human exposure. One disposal option that is commonly recommended for areas without access to landfills is the mixing of arsenic-bearing wastes with cow dung. These recommendations are made based on the ability of microorganisms to create volatile arsenic species (including mono-, di-, and tri-methylarsine gases) to be diluted in the atmosphere. However, most studies of environmental microbial communities have found only a small fraction (cow dung and arsenic-bearing wastes produced during drinking water treatment in West Bengal, India. Arsenic in gaseous, aqueous, and solid phases was measured. Consistent with previous reports, less than 0.02% of the total arsenic present was volatilized. A much higher amount (~5%) of the total arsenic was mobilized into the liquid phase. Through the application of molecular tools, including 16S rRNA sequencing and quantification of gene transcripts involved in methanogenesis, this study links microbial community activity with arsenic fate in potential disposal environments. These results illustrate that disposal of arsenic-bearing wastes by mixing with cow dung does not achieve its end goal of promoting arsenic volatilization but rather appears to increase arsenic mobilization in the aqueous phase, raising concerns with this approach.

  2. "Frictional processes" in carbonate-bearing rocks at seismic deformation conditions

    Science.gov (United States)

    Di Toro, G.; Spagnuolo, E.; Violay, M.; Rempe, M.; Smith, S. A. F.; Nielsen, S. B.; Fondriest, M.; Plumper, O.

    2015-12-01

    Moderate to large earthquakes often rupture and propagate along faults in carbonate-bearing rocks (dolostones, limestones, marbles, etc.). Compared to silicate-bearing rocks, which melt, weaken and wear when sheared at seismic slip rates (ca. 1 m/s), carbonate-bearing rocks do not melt, the minimum friction coefficient can be much lower (down to 5% of static friction) and the wear rate is negligible at seismic slip rates. In cohesive carbonate-bearing rocks, experiments simulating seismic deformation conditions and stopped at slip initiation (solid lubricant) at asperity contacts. With progressive slip and bulk temperature increase, nanograins accommodate large strain rates (ca. 104 s-1) by grain boundary sliding as suggested by several authors. The presence of a microporous fabric boosts pore-controlled diffusive process propelled by CO2 gas exhaust due to decarbonation. Enhanced pore-controlled diffusive processes allow (1) efficient mass transfer during grain boundary sliding and (2) sintering of the nanograins into a foam-like slip surface at the end of the experiment.

  3. Tetraphenylborate Solids Stability Tests

    Energy Technology Data Exchange (ETDEWEB)

    Walker, D.D. [Westinghouse Savannah River Company, AIKEN, SC (United States)

    1997-06-25

    Tetraphenylborate solids are a potentially large source of benzene in the slurries produced in the In-Tank Precipitation (ITP) process. The stability of the solids is an important consideration in the safety analysis of the process and we desire an understanding of the factors that influence the rate of conversion of the solids to benzene. This report discusses current testing of the stability of tetraphenylborate solids.

  4. Laser cooling of solids

    Energy Technology Data Exchange (ETDEWEB)

    Epstein, Richard I [Los Alamos National Laboratory; Sheik-bahae, Mansoor [UNM

    2008-01-01

    We present an overview of solid-state optical refrigeration also known as laser cooling in solids by fluorescence upconversion. The idea of cooling a solid-state optical material by simply shining a laser beam onto it may sound counter intuitive but is rapidly becoming a promising technology for future cryocooler. We chart the evolution of this science in rare-earth doped solids and semiconductors.

  5. Magnetic Bearing Controller Improvements for High Speed Flywheel System

    Science.gov (United States)

    Dever, Timothy P.; Brown, Gerald V.; Jansen, Ralph H.; Kascak, Peter E.; Provenza, Andrew J.

    2003-01-01

    A magnetic bearing control system for a high-speed flywheel system is described. The flywheel utilizes a five axis active magnetic bearing system, using eddy current sensors for position feedback to the bearing controller. Magnetic bearing controller features designed to improve flywheel operation and testing are described. Operational improvements include feed forward control to compensate for rotor imbalance, moving notch filtering to compensate for synchronous and harmonic rotational noise, and fixed notching to prevent rotor bending mode excitation. Testing improvements include adding safe gain, bearing current hold, bearing current zero, and excitation input features. Performance and testing improvements provided by these features are measured and discussed.

  6. Direct Model Reference Adaptive Control for a Magnetic Bearing

    Energy Technology Data Exchange (ETDEWEB)

    Durling, Mike [Rensselaer Polytechnic Inst., Troy, NY (United States)

    1999-11-01

    A Direct Model Reference Adaptive Controller (DMRAC) is applied to a magnetic bearing test stand. The bearing of interest is the MBC 500 Magnetic Bearing System manufactured by Magnetic Moments, LLC. The bearing model is presented in state space form and the system transfer function is measured directly using a closed-loop swept sine technique. Next, the bearing models are used to design a phase-lead controller, notch filter and then a DMRAC. The controllers are tuned in simulations and finally are implemented using a combination of MATLAB, SIMULINK and dSPACE. The results show a successful implementation of a DMRAC on the magnetic bearing hardware.

  7. Grievous Temporal and Occipital Injury Caused by a Bear Attack

    Directory of Open Access Journals (Sweden)

    Sampath Chandra Prasad

    2013-01-01

    Full Text Available Bear attacks are reported from nearly every part of the world. The chance of a human encountering a bear increases as the remote bear territory diminishes. The sloth bear is one of the three species of bears found in India, which inhabits the forests of India and its neighboring countries. Here we describe a teenager who came to us with a critical injury involving the face, temporal and occipital bones inflicted by a sloth bear attack. He underwent a temporal exploration, facial nerve decompression, pinna reconstruction, and occipital bone repair to save him from fatality.

  8. Blade Bearing Friction Estimation of Operating Wind Turbines

    DEFF Research Database (Denmark)

    Perisic, Nevena; Pedersen, Bo Juul; Kirkegaard, Poul Henning

    2012-01-01

    Blade root bearing on a wind turbine (WTG) enables pitching of blades for power control and rotor braking and is a WTG critical component. As the size of modern WTGs is constantly increasing, this leads to relatively less rigid bearings, more sensitive to deformations, thus WTG operational...... reliability can be increased by continuous monitoring of blade bearing. High blade bearing friction is undesirable, as it may be associated with excessive heating of the surfaces, damage and/or inefficient operation. Thus, continuous observation of bearing friction level is crucial for blade bearing health...

  9. Investigation on MoS2 and graphite coatings and their effects on the tribological properties of the radial spherical plain bearings

    Science.gov (United States)

    Qiu, Ming; Lu, Jianjun; Li, Yingchun; Lv, Guisen

    2016-07-01

    With constant enlargement of the application areas of the spherical plain bearings, higher quality lubrication of the bearings is required. To solve the lubricating problems of spherical plain bearings under high temperature, high vacuum, high speed, heavy loads and strong oxidation conditions, it is urgent for us to develop more excellent self-lubricating technologies. In this paper, the bonded solid lubricant coatings, which use inorganic phosphate as the binder, the mixture of MoS2 and graphite with two different weight proportions as the solid lubricant, are prepared by spraying under three different spray gun pressures. The bonding strength tests on the coatings show that the best spraying pressure is 0.2 MPa and the better mixing proportion of MoS2 to Graphite is 3:1. Then for the radial spherical plain bearings with steel/steel friction pair, after the coatings are made on the inner ring outer surfaces, the friction coefficient, the wear loss and the friction temperature of the bearings under four oscillating frequencies are investigated by a self-made tribo-tester. The test results, SEM of the worn morphologies and EDS of worn areas show that tribological properties of the bearing are obviously improved by the bonded solid lubricant coatings. When sprayed under the spray gun pressure of 0.2 MPa, the bearings have better anti-friction and anti-wear properties than those sprayed under 0.1 MPa and 0.3 MPa. Further as proved from the XPS analysis, between the coating with 3:1 mixing ratio of MoS2 to Graphite and the coating with 1:1 ratio, the former has less oxidation occurred on the surface and therefore has better tribological characteristics than the latter. This paper provides a reference to developing a new product of the radial spherical plain bearings with high bonding strength, oxidation resistance and abrasion resistance.

  10. Solid State Division

    Energy Technology Data Exchange (ETDEWEB)

    Green, P.H.; Watson, D.M. (eds.)

    1989-08-01

    This report contains brief discussions on work done in the Solid State Division of Oak Ridge National Laboratory. The topics covered are: Theoretical Solid State Physics; Neutron scattering; Physical properties of materials; The synthesis and characterization of materials; Ion beam and laser processing; and Structure of solids and surfaces. (LSP)

  11. Radium Adsorption to Iron Bearing Minerals in Variable Salinity Waters

    Science.gov (United States)

    Chen, M.; Kocar, B. D.

    2014-12-01

    Radium is a common, naturally occurring radioactive metal found in many subsurface environments. Radium isotopes are a product of natural uranium and thorium decay, and are particularly abundant within groundwaters where minimal flux leads to accumulation within porewaters. Radium has been used as a natural tracer to estimate submarine groundwater discharge (SGD) [1], where the ratios of various radium isotopes are used to estimate total groundwater flux to and from the ocean [2]. Further, it represents a substantial hazard in waste water produced after hydraulic fracturing for natural gas extraction [3], resulting in a significant risk of environmental release and increased cost for water treatment or disposal. Adsorption to mineral surfaces represents a primary pathway of radium retention within subsurface environments. For SGD studies, it is important to understand adsorption processes to correctly estimate GW fluxes, while in hydraulic fracturing, radium adsorption to aquifer solids will mediate the activities of radium within produced water. While some studies of radium adsorption to various minerals have been performed [4], there is a limited understanding of the surface chemistry of radium adsorption, particularly to iron-bearing minerals such as pyrite, goethite and ferrihydrite. Accordingly, we present the results of sorption experiments of radium to a suite of iron-bearing minerals representative of those found within deep saline and near-surface (freshwater) aquifers, and evaluate impacts of varying salinity solutions through the use of artificial groundwater, seawater, and shale formation brine. Further, we explore the impacts of pyrite oxidation and ferrihydrite transformation to other iron-bearing secondary minerals on the retention of radium. This work lays the groundwork for further study of radium use as a tracer for SGD, as well as understanding mechanisms of radium retention and release from deep aquifer materials following hydraulic fracturing

  12. Yellowstone grizzly bear investigations: Annual report of the Interagency Grizzly Bear Study Team, 2006

    Science.gov (United States)

    Schwartz, Charles C.; Haroldson, Mark A.; West, Karrie K.

    2007-01-01

    The contents of this Annual Report summarize results of monitoring and research from the 2006 field season. The report also contains a summary of nuisance grizzly bear (Ursus arctos horribilis) management actions.

  13. Kenai Peninsula Brown Bear Studies : Report of the Interagency Brown Bear Study Team, 1986

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report summarizes work conducted during the 1986 field season on brown bear (Ursus arctos) from the Kenai Peninsula, Alaska. Ground surveys were conducted to...

  14. Rotor Bearing System Analysis Using the Transfer Matrix Method with Thickness Assumption of Disk and Bearing

    CERN Document Server

    Ghasemalizadeh, Omid; Sadeghi, Hossein; Ahmadian, Mohammad Taghi

    2013-01-01

    One of the methods to find the natural frequencies of rotating systems is the application of the transfer matrix method. In this method the rotor is modeled as several elements along the shaft which have their own mass and moment of inertia. Using these elements, the entire continuous system is discretized and the corresponding differential equation can be stated in matrix form. The bearings at the end of the shaft are modeled as equivalent spring and dampers which are applied as boundary conditions to the discretized system. In this paper the dynamics of a rotor-bearing system is analyzed, considering the gyroscopic effect. The thickness of the disk and bearings is also taken into account. Continuous model is used for shaft. Results Show that, the stiffness of the shaft and the natural frequencies of the system increase, while the amplitude of vibration decreases as a consequence of increasing the thickness of the bearing.

  15. Yellowstone grizzly bear investigations: Annual report of the Interagency Grizzly Bear Study Team, 2001

    Science.gov (United States)

    Schwartz, Charles C.; Haroldson, Mark A.

    2001-01-01

    The contents of this Annual Report summarize results of monitoring and research from the 2001 field season. The report also contains a summary of nuisance grizzly bear (Ursus arctos horribilis) management actions.

  16. A New Oxygen Reservoir? Cristobalite-bearing Clasts in Parnallee

    Science.gov (United States)

    Bridges, J. C.; Franchi, I. A.; Hutchison, R.; Pillinger, C. T.

    1993-07-01

    Three alpha-cristobalite-bearing clasts up to 1.0cm in diameter (CB1, CB2, CB3) have been identified in Parnallee (LL3). CB1 and CB2 consist of CB1, and 8.56, 11.48 for CB2 (Fig. 1). The corresponding Delta^17O values [3] are 2.62 and 2.59. These unusually high delta^17O excesses preclude an origin through planetary [4] or impact-induced differentiation of ordinary chondrite material. CB1 and CB2 plot on an extension of a mixing line defined between the cristobalite grain from ALHA 76003 and its ordinary chondrite host [2]. The Parnallee clasts have escaped the metamorphism associated with secondary pyroxene crystallization in ALHA 76003 and so have undergone less isotopic exchange. Our values are probably close to the endmember of the mixing line. The Delta^17O values do fall within the range of the Carlisle Lakes-type chondrites, whole samples of which have Delta^17O values of 2.47 to 2.91 [5]. A line of slope 0.5 through the Carlisle Lakes field (Fig. 1) passes close to the Parnallee clasts. It has been suggested that early crystallized olivine in chondrules from Carlisle Lakes-type meteorites reacted with nebular vapors leading to the nucleation of a second generation of olivine [5]. Such extended olivine condensation would enhance the likelihood of SiO2 saturation in the residual nebular gas [6]. Gas-solid separation models predict that when nebular gas starts condensing SiO2 it should be extremely depleted in Al and Ca [1]. However their petrography suggests that the Parnallee clasts crystallized from an Al2O3 and CaO-bearing melt, which was presumably derived from SiO2-rich solid containing these oxides. The Parnallee clasts' origin is unclear but might be related through unknown fractionation processes to a larger O-isotope reservoir with which the Carlisle Lakes-type meteorites are associated. References: [1] Brigham C. A. et al. (1986) GCA, 50, 1655-1666. [2] Olsen E. J. et al. (1981) EPSL, 56, 82-88. [3] Clayton R. N. et al. (1991) GCA, 55, 2317-2337. [4

  17. Adaptation of the hindlimbs for climbing in bears.

    Science.gov (United States)

    Sasaki, Motoki; Endo, Hideki; Wiig, Oystein; Derocher, Andrew E; Tsubota, Toshio; Taru, Hajime; Yamamoto, Masako; Arishima, Kazuyoshi; Hayashi, Yoshihiro; Kitamura, Nobuo; Yamada, Junzo

    2005-04-01

    The hindlimbs of the Malayan sun bear (Helarctos malayanus), the polar bear (Ursus maritimus), the brown bear (Ursus arctos) and the giant panda (Ailuropoda melanoleuca) have been anatomically and osteometrically studied. The Musculus tibialis cranialis of the Malayan sun bear and the giant panda possessed a well-developed rich fleshy portion until the distal end of the tibia. In the polar bear and the brown bear, however, the fleshy portion of the M. tibialis cranialis was not developed until the distal end of the tibia. The tendon of the M. tibialis cranialis inserting on the proximal end of the Ossa metatarsalia was shorter in the Malayan sun bear and the giant panda than in the polar bear and the brown bear. In the Malayan sun bear and the giant panda, moreover, the M. popliteus was attached more distally to the tibia than in the polar bear and the brown bear. The stable dorsiflexion and supination of the foot and the efficient pronation of the crus are important for skillful tree climbing. The present study suggests that the Malayan sun bear and the giant panda have hindlimbs especially adapted to tree climbing by the well-developed fleshy portion of the M. tibialis cranialis reaching the distal end of the tibia, its short tendon, and the M. popliteus inserting near the distal end of the tibia.

  18. THE STRUCTURAL ANALYSIS OF STEEL SILOS WITH CYLINDRICAL-WALL BEARING AND PROFILE-STEEL BEARING

    OpenAIRE

    Zhengjun Tang; Daibiao Zhou; Chenwei Peng; Wenping Wu

    2015-01-01

    The silos are widely used in bulk material in many fields such as agriculture, mining, chemical, electric power storage, etc. Thin metal cylindrical silo shells are vulnerable to buckling failure caused by the compressive wall friction force. In this paper, the structural analysis of two types of steel silo with cylindrical-wall bearing and profile-steel bearing is implemented by Abaqus finite element analysis. The results indicate that under the same loading conditions, steel silos with prof...

  19. Production of fungal antibiotics using polymeric solid supports in solid-state and liquid fermentation.

    Science.gov (United States)

    Bigelis, Ramunas; He, Haiyin; Yang, Hui Y; Chang, Li-Ping; Greenstein, Michael

    2006-10-01

    The use of inert absorbent polymeric supports for cellular attachment in solid-state fungal fermentation influenced growth, morphology, and production of bioactive secondary metabolites. Two filamentous fungi exemplified the utility of this approach to facilitate the discovery of new antimicrobial compounds. Cylindrocarpon sp. LL-Cyan426 produced pyrrocidines A and B and Acremonium sp. LL-Cyan416 produced acremonidins A-E when grown on agar bearing moist polyester-cellulose paper and generated distinctly different metabolite profiles than the conventional shaken or stationary liquid fermentations. Differences were also apparent when tenfold concentrated methanol extracts from these fermentations were tested against antibiotic-susceptible and antibiotic-resistant Gram-positive bacteria, and zones of inhibition were compared. Shaken broth cultures of Acremonium sp. or Cylindrocarpon sp. showed complex HPLC patterns, lower levels of target compounds, and high levels of unwanted compounds and medium components, while agar/solid support cultures showed significantly increased yields of pyrrocidines A and B and acremonidins A-E, respectively. This method, mixed-phase fermentation (fermentation with an inert solid support bearing liquid medium), exploited the increase in surface area available for fungal growth on the supports and the tendency of some microorganisms to adhere to solid surfaces, possibly mimicking their natural growth habits. The production of dimeric anthraquinones by Penicillium sp. LL-WF159 was investigated in liquid fermentation using various inert polymeric immobilization supports composed of polypropylene, polypropylene cellulose, polyester-cellulose, or polyurethane. This culture produced rugulosin, skyrin, flavomannin, and a new bisanthracene, WF159-A, after fermentation in the presence and absence of polymeric supports for mycelial attachment. The physical nature of the different support systems influenced culture morphology and relative

  20. Numerical simulations of sand production in interbedded hydrate-bearing sediments during depressurization

    Science.gov (United States)

    Uchida, Shun; Lin, Jeen-Shang; Myshakin, Evgeniy; Seol, Yongkoo; Collett, Timothy S.; Boswell, Ray

    2017-01-01

    Geomechanical behavior of hydrate-bearing sediments during gas production is complex, involving changes in hydrate-dependent mechanical properties. When interbedded clay layers are present, the complexity is more pronounced because hydrate dissociation tends to occur preferentially in the sediments adjacent to the clay layers due to clay layers acting as a heat source. This would potentially lead to shearing deformation along the sand/clay contacts and may contribute to solid migration, which hindered past field-scale gas production tests. This paper presents a near-wellbore simulation of sand/clay interbedded hydrate-bearing sediments that have been subjected to depressurization and discusses the effect of clay layers on sand production.

  1. Inhibitory efficacy of the quantified prunellae spica extract on H22 tumor bearing mice

    Science.gov (United States)

    Wang, Zhi-ping; Chen, Tong-sheng

    2013-02-01

    Hepatocarcinoma, a malignant cancer, threaten human life badly. It is a current issue to seek the effective natural remedy from plant to treat cancer due to the resistence of the advanced hepatocarcinoma to chemotherapy. In this report, we assessed the antitumor activity of a prunellae spica aqueous extract (PSE) in vitro and in vivo. PSE was quantified by HPLC and UV. MTT assay showed that PSE did not effectively inhibit the growth of H22 cells. The in vivo anti-tumor activity was assessed by using the mice bearing H22 tumor. In vivo studies showed the higher antitumor efficacy of PSE without significant side effect assessed by the reduced tumor weight, and the extended survival time of the mice bearing H22 solid and ascites tumor. Collectively, PSE is a promising Chinese medicinal herb for treating hepatocarcinoma.

  2. Analysis of bearings behaviour with cylindrical rollers with variable center of gravity

    Directory of Open Access Journals (Sweden)

    Barabas Sorin

    2017-01-01

    Full Text Available This paper consists in analysis of the contact stress and deformations appeared to the cylindrical rollers with variable center of gravity who equips large bearings, with finite elements method. Also it proposed an innovative model of lubrication system mounts in the hollow cylindrical rollers of the large bearings where it is stored the lubricant who is driven to the raceways through holes fitted with closing/opening systems made in the cover, controlled by a command system, monitoring and control, equipped with temperature sensors and wireless command. Elimination of lubricant, in stages, leads to changes in position of center of gravity of roller, thus to change its behavior in functioning. Comparison of deformations occurred in cylindrical rollers, solid, with hollowness, and with variable center of gravity, allow favorable conclusions, on the implementation of the proposed lubrication system.

  3. Solid expellant plasma generator

    Science.gov (United States)

    Stone, Nobie H. (Inventor); Poe, Garrett D. (Inventor); Rood, Robert (Inventor)

    2010-01-01

    An improved solid expellant plasma generator has been developed. The plasma generator includes a support housing, an electrode rod located in the central portion of the housing, and a mass of solid expellant material that surrounds the electrode rod within the support housing. The electrode rod and the solid expellant material are made of separate materials that are selected so that the electrode and the solid expellant material decompose at the same rate when the plasma generator is ignited. This maintains a point of discharge of the plasma at the interface between the electrode and the solid expellant material.

  4. Solid state phenomena

    CERN Document Server

    Lawrance, R

    1972-01-01

    Solid State Phenomena explores the fundamentals of the structure and their influence on the properties of solids. This book is composed of five chapters that focus on the electrical and thermal conductivities of crystalline solids. Chapter 1 describes the nature of solids, particularly metals and crystalline materials. This chapter also presents a model to evaluate crystal structure, the forces between atom pairs, and the mechanism of plastic and elastic deformation. Chapter 2 demonstrates random vibrations of atoms in a solid using a one-dimensional array, while Chapter 3 examines the resista

  5. CHARACTERIZATION OF SOLID CONES

    Institute of Scientific and Technical Information of China (English)

    Qiu Jinghui

    2008-01-01

    The author gives a dual characterization of solid cones in locally convex spaces.From this the author obtains some criteria for judging convex cones to be solid in various inds of locally convex spaces. Using a general expression of the interior of a solid cone,the author obtains a number of necessary and sufficient conditions for convex cones to be solid in the framework of Banach spaces. In particular, the author gives a dual relationship between solid cones and generalized sharp cones. The related known results are improved and extended.

  6. Determination of 3,4-methylenedioxymethamphetamine and its five main metabolites in rat urine by solid-phase extraction and high performance liquid chromatography with on line mass spectrometry.

    Science.gov (United States)

    Menet, Marie-Claude; Fonsart, Julien; Hervé, Françoise; Fompeydie, Dominique; Galliot-Guilley, Martine; Noble, Florence; Scherrmann, Jean-Michel

    2010-10-15

    The consumption of psychostimulant amphetamine-like drugs has increased significantly in recent years. Some MDMA metabolites are probably involved in the neurotoxicity and neurodegeneration caused by prolonged use rather than MDMA itself. We recently developed a method to analyze MDMA and its five main metabolites in rat plasma [7]. We have now fully validated this method to the quantification of these drugs in rat urine. We extracted MDMA and its metabolites with Oasis WCX cartridges, separated them on a Nucleodur C18 analytical column and quantified them by ion-trap mass spectrometry. Linearity was excellent: 12.5-1250ng/mL urine for HMA, HMMA, MDA and MDMA, 25-2500ng/mL for HHMA, and 150-7500ng/mL for HHA (r(2)>0.993 for all analytes). The lower limits of quantification were 12.5ng/mL urine for MDMA, MDA, HMA and HMMA, 25ng/mL for HHMA and 150ng/mL for HHA. Reproducibility was good (intra-assay precision=1.7-6.1%; inter-assay precision=0.6-5.7%), as was accuracy (intra-assay deviation=0.1-4.8%; inter-assay deviation=0.7-7.9%). Average recoveries were around 85.0%, except for HHMA (66.2%) and HHA (53.0%) (CVurine samples taken over 24h from rats given subcutaneous MDMA.

  7. Optoelectronic Properties of Semiconductor Quantum Dot Solids for Photovoltaic Applications.

    Science.gov (United States)

    Chistyakov, A A; Zvaigzne, M A; Nikitenko, V R; Tameev, A R; Martynov, I L; Prezhdo, O V

    2017-09-07

    Quantum dot (QD) solids represent a new type of condensed matter drawing high fundamental and applied interest. Quantum confinement in individual QDs, combined with macroscopic scale whole materials, leads to novel exciton and charge transfer features that are particularly relevant to optoelectronic applications. This Perspective discusses the structure of semiconductor QD solids, optical and spectral properties, charge carrier transport, and photovoltaic applications. The distance between adjacent nanoparticles and surface ligands influences greatly electrostatic interactions between QDs and, hence, charge and energy transfer. It is almost inevitable that QD solids exhibit energetic disorder that bears many similarities to disordered organic semiconductors, with charge and exciton transport described by the multiple trapping model. QD solids are synthesized at low cost from colloidal solutions by casting, spraying, and printing. A judicious selection of a layer sequence involving QDs with different size, composition, and ligands can be used to harvest sunlight over a wide spectral range, leading to inexpensive and efficient photovoltaic devices.

  8. Amino Acids in the Asteroidal Water-Bearing Salt Crystals Hosted in the Zag Meteorite

    Science.gov (United States)

    Chan, Q. H. S.; Zolensky, M. E.; Burton, A. S.; Locke, D. R.

    2016-01-01

    Solid evidence of liquid water in primitive meteorites is given by the ordinary chondrites H5 Monahans (1998) and H3-6 Zag. Aqueous fluid inclusion-bearing halite (NaCl) crystals were shown to be common in Zag. These striking blue/purple crystals (Figure 1), which gained the coloration from electron-trapping in the Cl-vacancies through exposure to ionizing radiation, were determined to be over 4.0-4.7 billion years old by I-Xe dating. The halite grains are present as discrete grains within an H-chondrite matrix with no evidence for aqueous alteration that indicates a xenogenic source, possibly ancient cryovolcanism. They were proposed to be formed from the cryovolcanic plumes on icy C-type asteroids (possibly Ceres), and were transferred and incorporated into the H chondrite parent asteroid following the eruption event(s). A unique aspect of these halites is that they contain abundant solid inclusions hosted within the halites alongside the water inclusions. The solid inclusions were suggested to be entrained within the fluid erupted from the cryovolcanic event(s), and were shown to be comprised of abundant organics. Spectrofluorometric study and Raman imaging of the halites have identified macromolecular carbon and aliphatic carbon compounds. In order to investigate the type of organics present in Zag and in particular within the fluid-bearing halites, we studied for the first time the amino acid contents of a selected mineral (halite) phase in a meteorite sample.

  9. Extraction and characterization of latex and natural rubber from rubber-bearing plants.

    Science.gov (United States)

    Buranov, Anvar U; Elmuradov, Burkhon J

    2010-01-27

    Consecutive extraction of latex and natural rubber from the roots of rubber-bearing plants such as Taraxacum kok-saghyz (TKS), Scorzonera tau-saghyz (STS), and Scorzonera Uzbekistanica (SU) were carried out. Latex extraction was carried via two methods: Blender method and Flow method. The results of latex extraction were compared. Cultivated rubber-bearing plants contained slightly higher latex contents compared to those from wild fields. Several creaming agents for latex extraction were compared. About 50% of total natural rubber was extracted as latex. The results of the comparative studies indicated that optimum latex extraction can be achieved with Flow method. The purity of latex extracted by Blender method ( approximately 75%) was significantly lower than that extracted by Flow method (99.5%). When the latex particles were stabilized with casein, the latex was concentrated significantly. Through concentrating latex by flotation, the latex concentration of 35% was obtained. Bagasse contained mostly solid natural rubber. The remaining natural rubber in the bagasse (left after the latex extraction) was extracted using sequential solvent extraction first with acetone and then with several nonpolar solvents. Solid natural rubber was analyzed for gel content and characterized by size exclusion chromatography (SEC) for molecular weight determinations. SEC of solid natural rubber has shown that the molecular weight is about 1.8E6 and they contain less gel compared to TSR20 (Grade 20 Technically Specified Rubber), a commercial natural rubber from Hevea brasiliensis.

  10. Solids fluidizer-injector

    Science.gov (United States)

    Bulicz, T.R.

    1990-04-17

    An apparatus and process are described for fluidizing solid particles by causing rotary motion of the solid particles in a fluidizing chamber by a plurality of rotating projections extending from a rotatable cylinder end wall interacting with a plurality of fixed projections extending from an opposite fixed end wall and passing the solid particles through a radial feed orifice open to the solids fluidizing chamber on one side and a solid particle utilization device on the other side. The apparatus and process are particularly suited for obtaining intermittent feeding with continual solids supply to the fluidizing chamber. The apparatus and process are suitable for injecting solid particles, such as coal, to an internal combustion engine. 3 figs.

  11. Solid Base Catalysis

    CERN Document Server

    Ono, Yoshio

    2011-01-01

    The importance of solid base catalysts has come to be recognized for their environmentally benign qualities, and much significant progress has been made over the past two decades in catalytic materials and solid base-catalyzed reactions. The book is focused on the solid base. Because of the advantages over liquid bases, the use of solid base catalysts in organic synthesis is expanding. Solid bases are easier to dispose than liquid bases, separation and recovery of products, catalysts and solvents are less difficult, and they are non-corrosive. Furthermore, base-catalyzed reactions can be performed without using solvents and even in the gas phase, opening up more possibilities for discovering novel reaction systems. Using numerous examples, the present volume describes the remarkable role solid base catalysis can play, given the ever increasing worldwide importance of "green" chemistry. The reader will obtain an overall view of solid base catalysis and gain insight into the versatility of the reactions to whic...

  12. Rolling element bearing diagnostics—A tutorial

    Science.gov (United States)

    Randall, Robert B.; Antoni, Jérôme

    2011-02-01

    This tutorial is intended to guide the reader in the diagnostic analysis of acceleration signals from rolling element bearings, in particular in the presence of strong masking signals from other machine components such as gears. Rather than being a review of all the current literature on bearing diagnostics, its purpose is to explain the background for a very powerful procedure which is successful in the majority of cases. The latter contention is illustrated by the application to a number of very different case histories, from very low speed to very high speed machines. The specific characteristics of rolling element bearing signals are explained in great detail, in particular the fact that they are not periodic, but stochastic, a fact which allows them to be separated from deterministic signals such as from gears. They can be modelled as cyclostationary for some purposes, but are in fact not strictly cyclostationary (at least for localised defects) so the term pseudo-cyclostationary has been coined. An appendix on cyclostationarity is included. A number of techniques are described for the separation, of which the discrete/random separation (DRS) method is usually most efficient. This sometimes requires the effects of small speed fluctuations to be removed in advance, which can be achieved by order tracking, and so this topic is also amplified in an appendix. Signals from localised faults in bearings are impulsive, at least at the source, so techniques are described to identify the frequency bands in which this impulsivity is most marked, using spectral kurtosis. For very high speed bearings, the impulse responses elicited by the sharp impacts in the bearings may have a comparable length to their separation, and the minimum entropy deconvolution technique may be found useful to remove the smearing effects of the (unknown) transmission path. The final diagnosis is based on "envelope analysis" of the optimally filtered signal, but despite the fact that this

  13. Effect of mixing geopolymer and peat on bearing capacity in Ogan Komering Ilir (OKI) by California bearing ratio (CBR) test

    Science.gov (United States)

    Raharja, Danang S.; Hadiwardoyo, Sigit P.; Rahayu, Wiwik; Zain, Nasuhi

    2017-06-01

    Geopolymer is binder material that consists of solid material and the activator solution. Geopolymer material has successfully replaced cement in the manufacture of concrete with aluminosilicate bonding system. Geopolymer concrete has properties similar to cement concrete with high compressive strength, low shrinkage value, relatively low creep value, as well as acid-resistant. Based on these, the addition of polymers in peat soils is expected to improve the bearing capacity of peat soils. A study on the influence of geopolymer addition in peat soils was done by comparing before and after the peat soil was mixed with geopolymer using CBR (California Bearing Ratio) test in unsoaked and soaked conditions. 10% mixture content of the peat dry was used, weighted with a variety of curing time 4 hours, 5 days, and 10 days. There were two methods of mixing: first, peat was mixed with fly ash geopolymer activators and mixed solution (waterglass, NaOH, water), and second, peat was mixed with fly ash and mixed geopolymer (waterglass, NaOH, water, fly ash). Changes were observed in specific gravity, dry density, acidity (pH), and the microscopic structure with Scanning Electron Microscope (SEM). Curing time did not significantly affect the CBR value. It even shows a tendency to decline with longer curing time. The first type mixture obtained CBR value of: 5.4% for 4 hours curing, 4.6% for 5 days curing and 3.6% for 10 days curing. The second type mixture obtained CBR value of: 6.1% for 4 hours curing, 5.2% for 5 days curing and 5.2% for 10 days curing. Furthermore, the specific gravity value, dry density, pH near neutral and swelling percentage increased. From both variants, the second type mixture shows better results than the first type mixture. The results of SEM (Scanning Electron Microscopy) show the structure of the peat which became denser with the fly ash particles filling the peat microporous. Also, the reaction of fly ash with geopolymer is indicated by the solid

  14. Investigation of tribological and mechanical properties of metal bearings

    Indian Academy of Sciences (India)

    Bekir Sadik Ünlü

    2009-08-01

    Copper, aluminum and tin–lead based alloys are widely used as journal bearing materials in tribological applications. Bronze and brass are widely used as journal bearing materials for copper based alloys. Zamacs find applications as journal bearing materials for zinc based alloys, while duralumines are chosen as journal bearing materials for aluminum based alloys. In addition, white metals are widely used as journal bearing materials for tin–lead based alloys. These alloys ensure properties expected from journal bearings. In this study, tribological and mechanical properties of these journal bearings manufactured by metals were investigated. SAE 1050 steel shaft was used as counter abrader. Experiments were carried out in every 30 min for a total of 150 min by using radial journal bearing wear test rig.

  15. Land protection plan : Bear River Watershed Conservation Area

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The U.S. Fish and Wildlife Service is establishing a conservation area for the Bear River watershed in Idaho, Utah, and Wyoming. The Bear River Watershed...

  16. Bear range-grazing area survey: Joint report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Recommendations for establishing livestock grazing area, consistent with refuge purposes and minimization of bear attacks. Includes statistics on bear kills,...

  17. Self-Bearing Motor-Generator for Flywheels Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Self-bearing or ?bearingless? motors perform both motor and bearing support functions but such devices have not yet achieved speeds above 15,000 rpm. The innovation...

  18. Interchangeable Bearings for Profile and Weight Trade Studies Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Air-Lock, Incorporated is proposing to design fully sealed shoulder and arm bearings with interchangeable bearing housings. The interchangeable housings shall be...

  19. Polar bear den survey, Arctic National Wildlife Range

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — In conjunction with the Polar Bear Research Project being supervised by Mr. Jack Lentfer of the Bureau of Sport Fisheries and Wildlife two Polar Bear den surveys...

  20. A plan for the management of the Kodiak brown bear

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Management districts will be used as a tool to manage the population of bear on Kodiak Island. Theoretically, 204 bear may be taken off the refuge annually without...

  1. Kodiak brown bear population on Kodiak Island, Alaska

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — Methods and estimates of the Brown bear population on Kodiak Island. The total number of Kodiak Brown Bears on Kodiak Island has been estimated to be 1669. Three...

  2. Population Parameters and Harvest Characteristics of Black Bears in Georgia

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report summarizes findings of black bear distribution and population trends throughout Georgia and evaluates black bear harvest trends from 1992 to 2002....

  3. Blade Bearing Friction Estimation of Operating Wind Turbines

    DEFF Research Database (Denmark)

    Perisic, Nevena; Pedersen, Bo Juul; Kirkegaard, Poul Henning

    2012-01-01

    Blade root bearing on a wind turbine (WTG) enables pitching of blades for power control and rotor braking and is a WTG critical component. As the size of modern WTGs is constantly increasing, this leads to relatively less rigid bearings, more sensitive to deformations, thus WTG operational...... reliability can be increased by continuous monitoring of blade bearing. High blade bearing friction is undesirable, as it may be associated with excessive heating of the surfaces, damage and/or inefficient operation. Thus, continuous observation of bearing friction level is crucial for blade bearing health...... monitoring systems. A novel algorithm for online monitoring of bearing friction level is developed combining physical knowledge about pitch system dynamics with state estimator, i.e. observer theory and signal processing assuming realistic sensor availability. Results show estimation of bearing friction...

  4. Neonatal Amygdala Lesions and Stress Responsivity in Rats : Relevance to schizophrenia

    NARCIS (Netherlands)

    Terpstra, Jeroen

    2004-01-01

    "Stress responsiveness in an animal model with relevance to schizophrenia” Rats bearing lesions of the amygdala made on postnatal day 7 (D7 AMX) model aspects of neurodevelopmental psychopathologies, such as schizophrenia. Adult D7 AMX rats display impaired pre-pulse inhibition, impaired behaviora

  5. Granulocytic subset of myeloid derived suppressor cells in rats with mammary carcinoma

    NARCIS (Netherlands)

    Dolen, Y.; Gunaydin, G.; Esendagli, G.; Guc, D.

    2015-01-01

    Limited knowledge is available on myeloid derived suppressor cells (MDSCs) of rat origin. We examined the myeloid cells from peripheral blood, bone marrow and spleens of healthy and mammary tumor bearing rats employing a novel immunophenotyping strategy with CD172a, HIS48, and Rp-1 antibodies. We ad

  6. A Comparison of Experimental and Theoretical Results for Magnetic Bearings

    Science.gov (United States)

    Hibbs, Robert I., Jr.; Scharrer, Joseph K.; Galvin, Bonnie A.; Galvin, Mark W.

    2000-01-01

    A comprehensive program was undertaken to experimentally characterize the static and dynamic characteristics of a heteropolar magnetic bearing and to develop nonlinear theoretical models capable of accurately predicting magnetic bearing performance. This paper presents the results for the static characteristics of the magnetic bearing and a comparison with the predictions from the analytical model. The results indicate that the nonlinear theoretical model can accurately predict the static characteristics of the magnetic bearing.

  7. Optimized Coolant-Flow Diverter For Increased Bearing Life

    Science.gov (United States)

    Subbaraman, Maria R.; Butner, Myles F.

    1995-01-01

    Coolant-flow diverter for rolling-element bearings in cryogenic turbopump designed to enhance cooling power of flow in contact with bearings and thereby reduce bearing wear. Delivers jets of coolant as close as possible to hot spots at points of contact between balls and race. Also imparts swirl that enhances beneficial pumping effect. Used with success in end ball bearing of high-pressure-oxidizer turbopump.

  8. EXPERIMENTAL APPARATUS FOR EXAMINATION OF MAGNETIC FLUID LUBRICATED THURST BEARING

    Directory of Open Access Journals (Sweden)

    Józef SALWIŃSKI

    2014-06-01

    Full Text Available In recent years, there has been development of the structure of thrust bearing with magnetic fluids . The essence of this type of bearing is to maintain a liquid lubricant in a very narrow gap with magnetic fluid by a magnetic field. Such systems can act as the bearing lubrication and sealing. This paper presents description of the experimental apparatus for examination magnetic fluid lubricated thrust bearing. Description of the construction and characteristics of the measuring possibilities ware presented.

  9. Advanced High Speed Roller Bearing Inspection Techniques

    Science.gov (United States)

    1977-05-01

    Parametrics New York, New York S. Orange, Connecticut Modern Controls, Inc. Peerless Nuclear Corporation Minneapolis, Minnesota Stamford, Connecticut Monitor...California Reticon Slocomb, J. T., Co. Sunnyvale, California So. Glastonbury, Connecticut A6 Solid State Electronics Corporation Texas Instruments Inc

  10. Adaptive Variable Bias Magnetic Bearing Control

    Science.gov (United States)

    Johnson, Dexter; Brown, Gerald V.; Inman, Daniel J.

    1998-01-01

    Most magnetic bearing control schemes use a bias current with a superimposed control current to linearize the relationship between the control current and the force it delivers. With the existence of the bias current, even in no load conditions, there is always some power consumption. In aerospace applications, power consumption becomes an important concern. In response to this concern, an alternative magnetic bearing control method, called Adaptive Variable Bias Control (AVBC), has been developed and its performance examined. The AVBC operates primarily as a proportional-derivative controller with a relatively slow, bias current dependent, time-varying gain. The AVBC is shown to reduce electrical power loss, be nominally stable, and provide control performance similar to conventional bias control. Analytical, computer simulation, and experimental results are presented in this paper.

  11. Combination radial and thrust magnetic bearing

    Science.gov (United States)

    Blumenstock, Kenneth A. (Inventor)

    2002-01-01

    A combination radial and thrust magnetic bearing is disclosed that allows for both radial and thrust axes control of an associated shaft. The combination radial and thrust magnetic bearing comprises a rotor and a stator. The rotor comprises a shaft, and first and second rotor pairs each having respective rotor elements. The stator comprises first and second stator elements and a magnet-sensor disk. In one embodiment, each stator element has a plurality of split-poles and a corresponding plurality of radial force coils and, in another embodiment, each stator element does not require thrust force coils, and radial force coils are replaced by double the plurality of coils serving as an outer member of each split-pole half.

  12. Fail Safe, High Temperature Magnetic Bearings

    Science.gov (United States)

    Minihan, Thomas; Palazzolo, Alan; Kim, Yeonkyu; Lei, Shu-Liang; Kenny, Andrew; Na, Uhn Joo; Tucker, Randy; Preuss, Jason; Hunt, Andrew; Carter, Bart; hide

    2002-01-01

    This paper contributes to the magnetic bearing literature in two distinct areas: high temperature and redundant actuation. Design considerations and test results are given for the first published combined 538 C (1000 F) high speed rotating test performance of a magnetic bearing. Secondly, a significant extension of the flux isolation based, redundant actuator control algorithm is proposed to eliminate the prior deficiency of changing position stiffness after failure. The benefit of the novel extension was not experimentally demonstrated due to a high active stiffness requirement. In addition, test results are given for actuator failure tests at 399 C (750 F), 12,500 rpm. Finally, simulation results are presented confirming the experimental data and validating the redundant control algorithm.

  13. The sweet lung: Chewing gummi bear aspiration

    Science.gov (United States)

    Tavladaki, Theonimfi; Fitrolaki, Michaela-Diana; Spanaki, Anna-Maria; Ilia, Staurula; Geromarkaki, Elissabet; Briassoulis, George

    2012-01-01

    Inhalation of foreign bodies, a leading cause of accidental death, is most common in preschool children. In this article we report our experience with a 5-year-old Greek girl who presented with a 24-hour history of sore throat, chest pain, and shortness of breath. Emergency bronchoscopy was performed and multiple small chewing gummi bear (HARIBO) particles impacted in the orifices of the right main bronchus and right lobar and segmentalinic bronchi were successfully removed and aspirated. Aspiration of gummi bears, which is for the first time reported, may cause a silent choking episode leading to life-threatening bronchi obstruction at multiple sites, even in children older than 4 years. PMID:22919167

  14. Gravimeter using high-temperature superconductor bearing.

    Energy Technology Data Exchange (ETDEWEB)

    Hull, J. R.

    1998-09-11

    We have developed a sensitive gravimeter concept that uses an extremely low-friction bearing based on a permanent magnet (PM) levitated over a high-temperature superconductor (HTS). A mass is attached to the PM by means of a cantilevered beam, and the combination of PM and HTS forms a bearing platform that has low resistance to rotational motion but high resistance to horizontal, vertical, or tilting motion. The combination acts as a low-loss torsional pendulum that can be operated in any orientation. Gravity acts on the cantilevered beam and attached mass, accelerating them. Variations in gravity can be detected by time-of-flight acceleration, or by a control coil or electrode that would keep the mass stationary. Calculations suggest that the HTS gravimeter would be as sensitive as present-day superconducting gravimeters that need cooling to liquid helium temperatures, but the HTS gravimeter needs cooling only to liquid nitrogen temperatures.

  15. Static Load Distribution in Ball Bearings

    Science.gov (United States)

    Ricci, Mario

    2010-01-01

    A numerical procedure for computing the internal loading distribution in statically loaded, single-row, angular-contact ball bearings when subjected to a known combined radial and thrust load is presented. The combined radial and thrust load must be applied in order to avoid tilting between inner and outer rings. The numerical procedure requires the iterative solution of Z + 2 simultaneous nonlinear equations - where Z is the number of the balls - to yield an exact solution for axial and radial deflections, and contact angles. Numerical results for a 218 angular-contact ball bearing have been compared with those from the literature and show significant differences in the magnitudes of the ball loads, contact angles, and the extent of the loading zone.

  16. Whitebark pine, grizzly bears, and red squirrels

    Science.gov (United States)

    Mattson, D.J.; Kendall, K.C.; Reinhart, D.P.; Tomback, D.F.; Arno, S.F.; Keane, R.E.

    2001-01-01

    Appropriately enough, much of this book is devoted to discussing management challenges and techniques. However, the impetus for action—the desire to save whitebark pine (Pinus albicaulis)—necessarily arises from the extent to which we cherish it for its beauty and its connections with other things that we value. Whitebark pine is at the hub of a fascinating web of relationships. It is the stuff of great stories (cf. Quammen 1994). One of the more interesting of these stories pertains to the dependence of certain grizzly bear (Ursus arctos horribilis) populations on its seeds, and the role that red squirrels (Tamiasciurus hudsonicus) play as an agent of transfer between tree and bear.

  17. Trichinella surveillance in black bears (Ursus americanus) from Oregon, USA.

    Science.gov (United States)

    Mortenson, J A; Kent, M L; Fowler, D R; Chomel, B B; Immell, D A

    2014-01-01

    We used serology and muscle digestion to test black bears (Ursus americanus) from western Oregon, USA, for Trichinella. Results indicate black bears in Oregon are not part of a sylvatic cycle for Trichinella, and risk of human exposure to Trichinella larvae from eating black bear meat from Oregon appears low.

  18. Identification of dynamic properties of radial air-foil bearings

    NARCIS (Netherlands)

    Arora, V.; Hoogt, van der P.J.M.; Aarts, R.G.K.M.; Boer, de A.

    2010-01-01

    Air-foil bearings (AFBs) are self acting hydrodynamic bearings made from sheet metal foils comprised of at least two layers. The innermost “top foil” layer traps a gas pressure film that supports a load while the layer or layers underneath provide an elastic foundation. Air-foil bearings are current

  19. Temperature distribution and scuffing of tapered roller bearing

    Science.gov (United States)

    Wang, Ailin; Wang, Jiugen

    2014-11-01

    In the field of aerospace, high-speed trains and automobile, etc, analysis of temperature filed and scuffing failure of tapered roller bearings are more important than ever, and the scuffing failure of elements of such rolling bearings under heavy load and high speed still cannot be effectively predicted yet. A simplified model of tapered roller bearings consisted of one inner raceway, one outer raceway and a tapered roller was established, in which the interaction of several heat sources is ignored. The contact mechanics model, temperature model and model of scuffing failure are synthesized, and the corresponding computer programs are developed to analyze the effects of bearings parameters, different material and operational conditions on thermal performance of bearings, and temperature distribution and the possibility of surface scuffing are obtained. The results show that load, speed, thermal conductivity and tapered roller materials influence temperature rise and scuffing failure of bearings. Ceramic material of tapered roller results in the decrease of scuffing possibility of bearings to a high extent than the conventional rolling bearing steel. Compared with bulk temperature, flash temperature on the surfaces of bearing elements has a little influence on maximum temperature rise of bearing elements. For the rolling bearings operated under high speed and heavy load, this paper proposes a method which can accurately calculate the possibility of scuffing failure of rolling bearings.

  20. Marking behavior of Andean bears in an Ecuadorian cloud forest

    NARCIS (Netherlands)

    Filipczyková, Eva; Heitkonig, Ignas; Castellanos, Armando; Hantson, Wouter; Steyaert, Sam M.J.G.

    2017-01-01

    Very little is known about marking behavior of the endangered Andean bear (Tremarctos ornatus). Here, we present a first detailed description of Andean bear marking behavior obtained using camera traps. From November 2012 to April 2013, we inspected 16 bear trails in the Napo province of eastern