WorldWideScience

Sample records for rate turn point

  1. Virtual turning points

    CERN Document Server

    Honda, Naofumi; Takei, Yoshitsugu

    2015-01-01

    The discovery of a virtual turning point truly is a breakthrough in WKB analysis of higher order differential equations. This monograph expounds the core part of its theory together with its application to the analysis of higher order Painlevé equations of the Noumi–Yamada type and to the analysis of non-adiabatic transition probability problems in three levels. As M.V. Fedoryuk once lamented, global asymptotic analysis of higher order differential equations had been thought to be impossible to construct. In 1982, however, H.L. Berk, W.M. Nevins, and K.V. Roberts published a remarkable paper in the Journal of Mathematical Physics indicating that the traditional Stokes geometry cannot globally describe the Stokes phenomena of solutions of higher order equations; a new Stokes curve is necessary.

  2. The Philosophy of Turning Points

    DEFF Research Database (Denmark)

    Turcan, Romeo V.

    2013-01-01

    business and management field, the turning point is seen as a valuable unit of analysis within the research field. It is expected that this paper will encourage a dynamic scholarly conversation about the concept of turning point and how it can aid international business researchers in the development...

  3. Turning points in reactor design

    International Nuclear Information System (INIS)

    Beckjord, E.S.

    1995-01-01

    This article provides some historical aspects on nuclear reactor design, beginning with PWR development for Naval Propulsion and the first commercial application at Yankee Rowe. Five turning points in reactor design and some safety problems associated with them are reviewed: (1) stability of Dresden-1, (2) ECCS, (3) PRA, (4) TMI-2, and (5) advanced passive LWR designs. While the emphasis is on the thermal-hydraulic aspects, the discussion is also about reactor systems

  4. Turning points in reactor design

    Energy Technology Data Exchange (ETDEWEB)

    Beckjord, E.S.

    1995-09-01

    This article provides some historical aspects on nuclear reactor design, beginning with PWR development for Naval Propulsion and the first commercial application at Yankee Rowe. Five turning points in reactor design and some safety problems associated with them are reviewed: (1) stability of Dresden-1, (2) ECCS, (3) PRA, (4) TMI-2, and (5) advanced passive LWR designs. While the emphasis is on the thermal-hydraulic aspects, the discussion is also about reactor systems.

  5. Kantian Turning Point in Gadamer's Philosophical Hermeneutics

    Directory of Open Access Journals (Sweden)

    Kristína Bosáková

    2016-11-01

    Full Text Available The paper is treating the theme of a Kantian turning-point in the philosophical hermeneutics of H.- G. Gadamer based on of the harmonic relationship between metaphysics and science in Kantian philosophy from the point of view of the philosophical hermeneutics of Gadamer. The philosophical work of Kant had such an influence on Gadamer that without exaggerating we can talk about the Kantian turning-point in Gadamerian hermeneutics. Grondin, a former student of Gadamer, is talking about Kantian turning-point on the field of aesthetics, but in reality Kantian turning-point means much more than a mere change in the reception of the concept of judgement. It is a discovery of harmonical relationship between the beauty and the moral, between the reason and the sensitivity, between the modern sciences and the metaphysical tradition in the Kantian philosophy, made by Gadamer. This is what we call the Kantian turning-point in Gadamerian hermeneutics.

  6. Turning points in the history of mathematics

    CERN Document Server

    Grant, Hardy

    2015-01-01

    This book explores some of the major turning points in the history of mathematics, ranging from ancient Greece to the present, demonstrating the drama that has often been a part of its evolution. Studying these breakthroughs, transitions, and revolutions, their stumbling-blocks and their triumphs, can help illuminate the importance of the history of mathematics for its teaching, learning, and appreciation. Some of the turning points considered are the rise of the axiomatic method (most famously in Euclid), and the subsequent major changes in it (for example, by David Hilbert); the “wedding,” via analytic geometry, of algebra and geometry; the “taming” of the infinitely small and the infinitely large; the passages from algebra to algebras, from geometry to geometries, and from arithmetic to arithmetics; and the revolutions in the late nineteenth and early twentieth centuries that resulted from Georg Cantor’s creation of transfinite set theory. The origin of each turning point is discussed, along with...

  7. Nippon Cinema at the digital turning point

    Directory of Open Access Journals (Sweden)

    Marek Bochniarz

    2014-01-01

    Full Text Available This article is a review of a book written by Mitsuyo Wada Marciano – Japanese Cinema in the Digital Age. The author of this book examines the recent developments in the Japanese film industry at the turning point in the development of digital technologies. The book seeks to overcome the western approach to the subject, reinterprets classic films and explores new trends in transnational Japanese cinema (the term was proposed by the author to explain the situation of Japanese films in the context of Asian countries.

  8. Scalets, wavelets and (complex) turning point quantization

    Science.gov (United States)

    Handy, C. R.; Brooks, H. A.

    2001-05-01

    Despite the many successes of wavelet analysis in image and signal processing, the incorporation of continuous wavelet transform theory within quantum mechanics has lacked a compelling, first principles, motivating analytical framework, until now. For arbitrary one-dimensional rational fraction Hamiltonians, we develop a simple, unified formalism, which clearly underscores the complementary, and mutually interdependent, role played by moment quantization theory (i.e. via scalets, as defined herein) and wavelets. This analysis involves no approximation of the Hamiltonian within the (equivalent) wavelet space, and emphasizes the importance of (complex) multiple turning point contributions in the quantization process. We apply the method to three illustrative examples. These include the (double-well) quartic anharmonic oscillator potential problem, V(x) = Z2x2 + gx4, the quartic potential, V(x) = x4, and the very interesting and significant non-Hermitian potential V(x) = -(ix)3, recently studied by Bender and Boettcher.

  9. Regional air pollution at a turning point.

    Science.gov (United States)

    Grennfelt, Peringe; Hov, Oystein

    2005-02-01

    The control of transboundary air pollution in Europe has been successful. Emissions of many key pollutants are decreasing and there are signs of improvements in damaged ecosystems. The strategies under development within the CAFE programme under the European Commission and the Convention on Long-range Transboundary Air Pollution (CLRTAP), aim to take regional air pollution control a large step further, in particular with respect to small particles. In this paper we highlight the new strategies but look primarily at socioeconomic trends and climate change feedbacks that may have a significant influence on the outcome of the strategies and which so far have not been considered. In particular, we point out the influence on air quality of increased summer temperatures in Europe and of increasing emissions including international shipping, outside of Europe. Taken together the further emissions reductions in Europe and the increasing background pollution, slowly cause a greying of the Northern Hemisphere troposphere rather than the traditional picture of dominant emissions in Europe and North America ('black') with much lower emission intensities elsewhere ('white'). A hemispheric approach to further combat air pollution will become necessary in Europe and elsewhere.

  10. The turning points of world history : financial and methodological interpretations

    OpenAIRE

    Kukliński, Antoni (ed.); Pawłowski, Krzysztof (ed.); Swianiewicz, Jan (ed.)

    2012-01-01

    Volumes VI and VII of the REUPUS Series “The Atlantic Community. The Titanic of the XXI Century?” and “The Turning Points of World History” can be seen as twin volumes trying to find new empirical observations, new methodological approaches and new value judgements to face the enigma of the XXI Century. Those volumes try to present some new interpretations of one of the greatest turning points of human history which is the essential feature of our times... Volume VII is the ...

  11. The Lewisian turning point and international migration: the case of Japan.

    Science.gov (United States)

    Watanabe, S

    1994-01-01

    "This article critically examines the Lewisian turning point [concerning the availability of unlimited manpower resources] in light of Japan's experience since the mid-1800s. Japan reached its Lewisian turning point around 1960. Contrary to the assumptions of the theory however, the findings for Japan indicate that political factors have been more determinative of the rate of migration than purely economic ones. Prior to its turning point in 1960, international relations, war and forced repatriation were the decisive factors. Recently, though the inflow of foreign workers to fill labor shortages has increased, so also has the outflow of Japanese to accompany direct foreign investment." excerpt

  12. A falling of the veils: turning points and momentous turning points in leadership and the creation of CSR

    OpenAIRE

    Hemingway, C.; Starkey, Kenneth

    2017-01-01

    This article uses the life stories approach to leadership and leadership development. Using exploratory, qualitative data from a Forbes Global 2000 and FTSE 100 company, we discuss the role of the turning point (TP) as an important antecedent of leadership in corporate social responsibility. We argue that TPs are causally efficacious, linking them to the development of life narratives concerned with an evolving sense of personal identity. Using both a multi-disciplinary perspective and a mult...

  13. Wofford-Thornburgh: a turning point for health reform.

    Science.gov (United States)

    Tokarski, C

    1992-01-01

    The November 5 special election in Pennsylvania pitting appointed Senator Harris Wofford against former U.S. Attorney General Richard Thornburgh was a turning point in the national debate over health reform. Under the glare of media spotlights, Wofford mounted a come-from-behind victory over the heavily favored Thornburgh by trumpeting "national health insurance." Since Wofford's victory, President Bush has rethought his previous indifference to health reform and promised to announce a comprehensive plan in January, more than a year ahead of schedule.

  14. Forecasting Macedonian Business Cycle Turning Points Using Qual Var Model

    Directory of Open Access Journals (Sweden)

    Petrovska Magdalena

    2016-09-01

    Full Text Available This paper aims at assessing the usefulness of leading indicators in business cycle research and forecast. Initially we test the predictive power of the economic sentiment indicator (ESI within a static probit model as a leading indicator, commonly perceived to be able to provide a reliable summary of the current economic conditions. We further proceed analyzing how well an extended set of indicators performs in forecasting turning points of the Macedonian business cycle by employing the Qual VAR approach of Dueker (2005. In continuation, we evaluate the quality of the selected indicators in pseudo-out-of-sample context. The results show that the use of survey-based indicators as a complement to macroeconomic data work satisfactory well in capturing the business cycle developments in Macedonia.

  15. [Adult health problems and coping at life turning points].

    Science.gov (United States)

    Lee, Sheuan; Lu, Ying-Chi; Yen, Wen-Jiuan; Lin, Shu-Chin

    2004-02-01

    At important life turning points, middle-aged adults face many physiological changes (e.g., aging, changes in hormone levels) and alterations in family structure (e.g., children growing up and leaving home). In addition to facing these changes and their impacts, adults must also take on challenges in terms of self-concept, body image, life goals, and life meaning. Illnesses that commonly occur during this life stage include menopausal depression, substance abuse, and anxiety. Traditional treatment models are medical-oriented, but curative effects are limited and hospital visits still occur at high frequencies, resulting in increased medical expenses and disruptions in family life. The authors review the current literature on curative models in this area, and discuss the potential of a combination of physical therapy, cognitive, and existential-humanistic therapy to improve patients' physical strength, self-concept, self-esteem, and self-confidence in an effort to overcome physio-psycho-social disorders and to increase vitality.

  16. The German energetic turning point: year n+2

    International Nuclear Information System (INIS)

    Cruciani, Michel

    2013-07-01

    This publication proposes an analysis of the evolution of the German energy sector, two years after the adoption of a new energy policy. It notably aims at identifying the consequences of this important turning point which was characterised by the decision to phase out nuclear while keeping on reducing energy consumption and greenhouse gas emissions, and developing renewable energies. In a first part, the author comments the objectives associated with the present evolution in terms of reducing the primary energy consumption, reducing raw electric power consumption, energy consumption in transports, CO_2 emissions, of increasing the share of renewable energies and power production from renewable sources, and of complying with European objectives. The second part discusses technical aspects of the development of power generation from renewable sources by addressing the following issues: prospective, grid extension and strengthening, intermittency management, industrial orientation. The third part addresses economic aspects of this development: promotion of electricity production from renewable sources, relationship between power generation from renewable sources and electricity price, public debate on electricity price, employment and economic benefits, financing the energy transition, and the European dimension. In conclusion, the author discusses whether the German energy shift is a model or a counter-example

  17. The Turning Point for the Recent Acceleration of the Universe with a Cosmological Constant

    Directory of Open Access Journals (Sweden)

    Zhang T. X.

    2012-04-01

    Full Text Available The turning point and acceleration expansion of the universe are investigated according to the standard cosmological theory with a non-zero cosmological constant. Choosing the Hubble constant H 0 , the radius of the present universe R 0 , and the density parameter in matter Ω M , 0 as three independent parameters, we have analytically examined the other properties of the universe such as the density parameter in dark energy, the cosmologi- cal constant, the mass of the universe, the turning point redshift, the age of the present universe, and the time-dependent radius, expansion rate, velocity, and acceleration pa- rameter of the universe. It is shown that the turning point redshift is only dependent of the density parameter in matter, not explicitly on the Hubble constant and the radius of the present universe. The universe turned its expansion from past deceleration to recent acceleration at the moment when its size was about 3 / 5 of the present size if the density parameter in matter is about 0.3 (or the turning point redshift is 0.67. The expansion rate is very large in the early period and decreases with time to approach the Hubble constant at the present time. The expansion velocity exceeds the light speed in the early period. It decreases to the minimum at the turning point and then increases with time. The minimum and present expansion velocities are determined with the independent parameters. The solution of time-dependent radius shows the universe expands all the time. The universe with a larger present radius, smaller Hubble constant, and / or smaller density parameter in matter is elder. The universe with smaller density parameter in matter accelerates recently in a larger rate but less than unity.

  18. What can be seen beyond the turning points?

    International Nuclear Information System (INIS)

    Morita, Koji

    1997-01-01

    LNG markets in Asia has faced turning points in 1990s. There is sluggish growth of Japanese demand, rapid demand growth of Korea and Taiwan, and increase of dependency on the Middle East. Will these situation continue after 2000? In Japan, energy demand will grow steadily, and development of nuclear power stations will not proceed without difficulty. Considering the emission of carbon dioxide, LNG demand will expand more than the Government outlook of 68 ∼ 60 mil. tons in 2010. IEEJ (Institute of Energy Economics Japan) forecasts that it will come to 58 mil. tons in 2010, including 1 ∼ 2 mil. tons of indigenous production. Korea secured two LNG projects newly, Ras Laffan (Qatar) and Oman. Considering the secured volume, LNG consumption will continue to expand even after 2000. But thinking of the lesser population of 21 mil. and warm climate of Taiwan, the extent of LNG demand expansion may not be so large. Big unknown factors exist in Asia: China and India. Their large population can give a great influence on LNG market in Asia. Several gas-fired power projects by IPP are already being planned. According to the Indian Government, as annual production capacity of natural gas is limited, more than 40 bil. m 3 must be fulfilled by import in 2005. Some indicators of China, GDP, energy consumption and so on, are saying that Shanghai and some cities may have already prepared conditions to introduce LNG. They may begin to utilize LNG by taking surplus of existing LNG projects in the later half of 2000s. (LN)

  19. Influence of acute normobaric hypoxia on physiological variables and lactate turn point determination in trained men.

    Science.gov (United States)

    Ofner, Michael; Wonisch, Manfred; Frei, Mario; Tschakert, Gerhard; Domej, Wolfgang; Kröpfl, Julia M; Hofmann, Peter

    2014-12-01

    The goal of this study is to evaluate the response of physiological variables to acute normobaric hypoxia compared to normoxia and its influence on the lactate turn point determination according to the three-phase model of energy supply (Phase I: metabolically balanced at muscular level; Phase II: metabolically balanced at systemic level; Phase III: not metabolically balanced) during maximal incremental exercise. Ten physically active (VO2max 3.9 [0.49] l·min(-1)), healthy men (mean age [SD]: 25.3 [4.6] yrs.), participated in the study. All participants performed two maximal cycle ergometric exercise tests under normoxic as well as hypoxic conditions (FiO2 = 14%). Blood lactate concentration, heart rate, gas exchange data, and power output at maximum and the first and the second lactate turn point (LTP1, LTP2), the heart rate turn point (HRTP) and the first and the second ventilatory turn point (VETP1, VETP2) were determined. Since in normobaric hypoxia absolute power output (P) was reduced at all reference points (max: 314 / 274 W; LTP2: 218 / 184 W; LTP1: 110 / 96 W), as well as VO2max (max: 3.90 / 3.23 l·min(-1); LTP2: 2.90 / 2.43 l·min(-1); LTP1: 1.66 / 1.52 l·min(-1)), percentages of Pmax at LTP1, LTP2, HRTP and VETP1, VETP2 were almost identical for hypoxic as well as normoxic conditions. Heart rate was significantly reduced at Pmax in hypoxia (max: 190 / 185 bpm), but no significant differences were found at submaximal control points. Blood lactate concentration was not different at maximum, and all reference points in both conditions. Respiratory exchange ratio (RER) (max: 1.28 / 1.08; LTP2: 1.13 / 0.98) and ventilatory equivalents for O2 (max: 43.4 / 34.0; LTP2: 32.1 / 25.4) and CO2 (max: 34.1 / 31.6; LTP2: 29.1 / 26.1) were significantly higher at some reference points in hypoxia. Significant correlations were found between LTP1 and VETP1 (r = 0.778; p better the performance of the athletes the higher is the effect of hypoxiaThe HRTP and LTP2 are

  20. O turning point da grande reportagem multimídia

    OpenAIRE

    Longhi, Raquel Ritter; Universidade Federal de Santa Catarina / Campus Reitor João David Ferreira Lima. Florianópolis, Santa Catarina. Brasil. CEP: 88049-900 Tel: (48) 3721.9000

    2015-01-01

    Este artigo analisa o estado da arte da grande reportagem multimídia no jornalismo online, atentando para um momento que se pode definir como “turning point”, ou ponto de virada desse tipo de formato noticioso. A partir de uma sistematização da evolução dos formatos expressivos multimidiáticos da notícia no jornalismo digital, o artigo identifica três momentos principais dessa trajetória: o slide-show noticioso, no início dos anos 2000; os especiais multimídia, de meados de 2000 a 2011 e a gr...

  1. EU ECONOMIC GOVERNANCE REFORM: ARE WE AT A TURNING POINT?

    Directory of Open Access Journals (Sweden)

    Daniel Daianu

    2011-03-01

    Full Text Available The sovereign debt crisis is creating enormous anguish in the European Monetary Union (EMU. Not surprisingly, emergency measures continue to be used at a time when a sort of economic recovery seems to be underway. Against this background the European Council summit of last October considered a Task Force report with a telling name: "Strengthening economic governance in the EU". This document is to be examined in conjunction with the governance reform proposals issued by the European Commission at the end of September and related documents. For the depth of this financial crisis and the "Great Recession" have forced EU governments and EU institutions to take a hard look at the governance structure of the Union. But it would be wrong to say that this demarche is an attempt to explore a terra incognita. From the very beginning of the European Monetary Union (EMU there was some discomfort with its institutional underpinnings and there were misgivings regarding its optimality as a currency area. This explains why a train of thought underlines a political rationale, too, for the creation of the EMU. Likewise, criticism regarding the way regulation and supervision have been established in the Union is not of recent vintage. And insufficiencies of the Stability and Growth Pact (SGP, with almost all member states flouting its rules at various points in time, have been repeatedly pointed out. This said, however, the flaws of financial intermediation have been less tackled by policy-makers and central bankers for reasons which, partially, are to be found in a paradigm which has dominated economic thinking in recent decades. This paper focuses on roots of the huge strain in the EU (EMU and main policy issues ensuing from the current crisis. It also looks at the stake NMSs have in a reformed EU economic governance structure. The challenges for EU economic governance reform are to be seen from a broad perspective: the crisis of the financial intermediation

  2. 77 FR 4989 - Turning Point Solar LLC: Notice of Availability of an Environmental Assessment

    Science.gov (United States)

    2012-02-01

    ... monocrystalline photovoltaic panels mounted on fixed solar racking equipment and the construction of access roads... DEPARTMENT OF AGRICULTURE Rural Utilities Service Turning Point Solar LLC: Notice of Availability... possible financial assistance for a proposal by Turning Point Solar LCC (TPS). The proposal consists of...

  3. Credit Portfolio Management in a Turning Rates Environment

    OpenAIRE

    Berd, Arthur M.; Ranguelova, Elena; da Silva, Antonio Baldaque

    2013-01-01

    We give a detailed account of correlations between credit sector/quality and treasury curve factors, using the robust framework of the Barclays POINT Global Risk Model. Consistent with earlier studies, we find a strong negative correlation between sector spreads and rate shifts. However, we also observe that the correlations between spreads and Treasury twists reversed recently, which is likely attributable to the Fed's ongoing quantitative easing. We also find that short-term effective durat...

  4. Understanding turning points in intimate partner violence: factors and circumstances leading women victims toward change.

    Science.gov (United States)

    Chang, Judy C; Dado, Diane; Hawker, Lynn; Cluss, Patricia A; Buranosky, Raquel; Slagel, Leslie; McNeil, Melissa; Scholle, Sarah Hudson

    2010-02-01

    When counseling women experiencing intimate partner violence (IPV), healthcare providers can benefit from understanding the factors contributing to a women's motivation to change her situation. We wished to examine the various factors and situations associated with turning points and change seeking in the IPV situation. We performed qualitative analysis on data from 7 focus groups and 20 individual interviews with women (61 participants) with past and/or current histories of IPV. The turning points women identified fell into 5 major themes: (1) protecting others from the abuse/abuser; (2) increased severity/humiliation with abuse; (3) increased awareness of options/access to support and resources; (4) fatigue/recognition that the abuser was not going to change; and (5) partner betrayal/infidelity. Women experiencing IPV can identify specific factors and events constituting turning points or catalyst to change in their IPV situation. These turning points are dramatic shifts in beliefs and perceptions of themselves, their partners, and/or their situation that alter the women's willingness to tolerate the situation and motivate them to consider change. When counseling women experiencing IPV, health providers can incorporate understanding of turning points to motivate women to move forward in their process of changing their IPV situation.

  5. A Qualitative Study of Turning Points or Aha! Moments in Older Adults' Discussions About Organ Donation.

    Science.gov (United States)

    Downing, Kimberly; Jones, Linda L

    2018-01-01

    Older adults (50-70 years old) have lower organ donor registration rates than younger adults. Older adults have different informational needs and donor registration behavior than younger age groups. The objective of this qualitative study was to understand insights of older adults about organ donation to effectively address the barriers to becoming an organ donor. This study identified turning points as "Aha!" moments that occurred during a dialogue intervention where older adults discussed benefits, barriers, and process to organ donation. Dialogues were held with small groups of older adults in 11 communities in a Midwestern organ procurement organization service area. Participants were positive to organ donation, but not registered as an organ donor. Methods/Approach: Qualitative analysis of verbatim comments from the dialogue and a follow-up survey were used to examine turning points or "Aha!" moments of participants' decision-making about organ donation and organ donor registration. Twenty-one separate in-depth dialogues were conducted with 198 participants, with mean age of 60.57 years. There were 2757 separate comments coded with 465 of the comments (17%) identified as providing Aha! moments during the dialogue. Three themes include benefits of organ donation (30%), barriers about organ donation (39%), and organ donation process (31%). The research identified moments in the dialogue where possible learning about organ donation may have occurred. After participation in the dialogue process, there was an increase in intent to register to be an organ donor, organ donation discussion with family and friends, and organ donor registration.

  6. Leveraging finances for public health system improvement: results from the Turning Point initiative.

    Science.gov (United States)

    Bekemeier, Betty; Riley, Catharine M; Berkowitz, Bobbie

    2007-01-01

    Reforming the public health infrastructure requires substantial system changes at the state level; state health agencies, however, often lack the resources and support for strategic planning and systemwide improvement. The Turning Point Initiative provided support for states to focus on large-scale system changes that resulted in increased funding for public health capacity and infrastructure development. Turning Point provides a test case for obtaining financial and institutional resources focused on systems change and infrastructure development-areas for which it has been historically difficult to obtain long-term support. The purpose of this exploratory, descriptive survey research was to enumerate the actual resources leveraged toward public health system improvement through the partnerships, planning, and implementation activities funded by the Robert Wood Johnson Foundation as a part of the Turning Point Initiative.

  7. The turning points in the solution of n-queens problem using ...

    African Journals Online (AJOL)

    We also observed that, using a set of even and odd numbers, the odd number experience a turning point before the even numbers. The algorithm of the standard backtracking method was implemented in C programming language and, we used Microsoft Notepad as our output file to display the arrangement of the queens.

  8. 77 FR 25131 - Turning Point Solar LLC: Notice of Finding of No Significant Impact

    Science.gov (United States)

    2012-04-27

    ... monocrystalline photovoltaic panels mounted on fixed solar racking equipment and the construction of access roads... DEPARTMENT OF AGRICULTURE Rural Utilities Service Turning Point Solar LLC: Notice of Finding of No... Environmental Assessment (EA) associated with a solar generation project. The EA was prepared in accordance with...

  9. A Systematic Approach to Process Evaluation in the Central Oklahoma Turning Point (COTP) Partnership

    Science.gov (United States)

    Tolma, Eleni L.; Cheney, Marshall K.; Chrislip, David D.; Blankenship, Derek; Troup, Pam; Hann, Neil

    2011-01-01

    Formation is an important stage of partnership development. Purpose: To describe the systematic approach to process evaluation of a Turning Point initiative in central Oklahoma during the formation stage. The nine-month collaborative effort aimed to develop an action plan to promote health. Methods: A sound planning framework was used in the…

  10. Coupling effects on turning points of infectious diseases epidemics in scale-free networks.

    Science.gov (United States)

    Kim, Kiseong; Lee, Sangyeon; Lee, Doheon; Lee, Kwang Hyung

    2017-05-31

    Pandemic is a typical spreading phenomenon that can be observed in the human society and is dependent on the structure of the social network. The Susceptible-Infective-Recovered (SIR) model describes spreading phenomena using two spreading factors; contagiousness (β) and recovery rate (γ). Some network models are trying to reflect the social network, but the real structure is difficult to uncover. We have developed a spreading phenomenon simulator that can input the epidemic parameters and network parameters and performed the experiment of disease propagation. The simulation result was analyzed to construct a new marker VRTP distribution. We also induced the VRTP formula for three of the network mathematical models. We suggest new marker VRTP (value of recovered on turning point) to describe the coupling between the SIR spreading and the Scale-free (SF) network and observe the aspects of the coupling effects with the various of spreading and network parameters. We also derive the analytic formulation of VRTP in the fully mixed model, the configuration model, and the degree-based model respectively in the mathematical function form for the insights on the relationship between experimental simulation and theoretical consideration. We discover the coupling effect between SIR spreading and SF network through devising novel marker VRTP which reflects the shifting effect and relates to entropy.

  11. Hysteresis compensation for piezoelectric actuators in single-point diamond turning

    Science.gov (United States)

    Wang, Haifeng; Hu, Dejin; Wan, Daping; Liu, Hongbin

    2006-02-01

    In recent years, interests have been growing for fast tool servo (FTS) systems to increase the capability of existing single-point diamond turning machines. Although piezoelectric actuator is the most universal base of FTS system due to its high stiffness, accuracy and bandwidth, nonlinearity in piezoceramics limits both the static and dynamic performance of piezoelectric-actuated control systems evidently. To compensate the nonlinear hysteresis behavior of piezoelectric actuators, a hybrid model coupled with Preisach model and feedforward neural network (FNN) has been described. Since the training of FNN does not require a special calibration sequence, it is possible for on-line identification and real-time implementation with general operating data of a specific piezoelectric actuator. To describe the rate dependent behavior of piezoelectric actuators, a hybrid dynamic model was developed to predict the response of piezoelectric actuators in a wider range of input frequency. Experimental results show that a maximal error of less than 3% was accomplished by this dynamic model.

  12. A Turning Point? Recent Developments on Inequality in Latin America and the Caribbean

    OpenAIRE

    Gasparini, Leonardo; Cruces, Guillermo; Tornarolli, Leopoldo; Marchionni, Mariana

    2009-01-01

    This paper documents patterns and recent developments on different dimensions of inequality in Latin America and the Caribbean (LAC). New comparative international evidence confirms that LAC is a region of high inequality, although maybe not the highest in the world. Income inequality has fallen in the 2000s, suggesting a turning point from the significant increases of the 1980s and 1990s. There have been some significant improvements toward the reduction in inequalities in the access to prim...

  13. The turning points of revenue management: a brief history of future evolution

    Directory of Open Access Journals (Sweden)

    Ian Seymour Yeoman

    2017-04-01

    Full Text Available Purpose – The primary aim of revenue management (RM is to sell the right product to the right customer at the right time for the right price. Ever since the deregulation of US airline industry, and the emergence of the internet as a distribution channel, RM has come of age. The purpose of this paper is to map out ten turning points in the evolution of Revenue Management taking an historical perspective. Design/methodology/approach – The paper is a chronological account based upon published research and literature fundamentally drawn from the Journal of Revenue and Pricing Management. Findings – The significance and success to RM is attributed to the following turning points: Littlewood’s rule, Expected Marginal Seat Revenue, deregulation of the US air industry, single leg to origin and destination RM, the use of family fares, technological advancement, low-cost carriers, dynamic pricing, consumer and price transparency and pricing capabilities in organizations. Originality/value – The originality of the paper lies in identifying the core trends or turning points that have shaped the development of RM thus assisting futurists or forecasters to shape the future.

  14. On Recall Rate of Interest Point Detectors

    DEFF Research Database (Denmark)

    Aanæs, Henrik; Dahl, Anders Lindbjerg; Pedersen, Kim Steenstrup

    2010-01-01

    in relation to the number of interest points, the recall rate as a function of camera position and light variation, and the sensitivity relative to model parameter change. The overall conclusion is that the Harris corner detector has a very high recall rate, but is sensitive to change in scale. The Hessian......In this paper we provide a method for evaluating interest point detectors independently of image descriptors. This is possible because we have compiled a unique data set enabling us to determine if common interest points are found. The data contains 60 scenes of a wide range of object types......, and for each scene we have 119 precisely located camera positions obtained from a camera mounted on an industrial robot arm. The scene surfaces have been scanned using structured light, providing precise 3D ground truth. We have investigated a number of the most popular interest point detectors. This is done...

  15. Approximate solutions and error bounds for the wave equation in a stratified ionosphere with turning points

    International Nuclear Information System (INIS)

    Nalesso, G.F.; Jacobson, A.R.

    1991-01-01

    A solution to the problem of a plane electromagnetic wave traveling parallel to a constant magnetic field in a horizontally stratified ionosphere was developed assuming that the permittivity of the medium can be represented as the sum of an unperturbed component and a perturbed component. The method is successfully applied to the case of a linearly varying permittivity of a lossless ionosphere with a superimposed Gaussian perturbing term. The feasibility of applying the method in the presence of an odd number of turning points is discussed. 13 refs

  16. Local Scaling Properties and Market Turning Points at Prague Stock Exchange

    Czech Academy of Sciences Publication Activity Database

    Krištoufek, Ladislav

    2010-01-01

    Roč. 41, č. 6 (2010), s. 1001-1014 ISSN 0587-4254 R&D Projects: GA ČR GA402/09/0965; GA ČR GD402/09/H045 Grant - others:GA UK(CZ) 118310 Institutional research plan: CEZ:AV0Z10750506 Keywords : scaling * Hurst exponent * extreme events Subject RIV: AH - Economics Impact factor: 0.671, year: 2010 http://library.utia.cas.cz/separaty/2010/E/kristoufek-local scaling properties and market turning points at prague stock exchange.pdf

  17. 76 FR 37313 - Turning Point Solar LLC; Notice of Intent To Hold a Public Scoping Meeting and Prepare an...

    Science.gov (United States)

    2011-06-27

    ... installation of high- efficiency monocrystalline photovoltaic panels mounted on fixed solar racking equipment... DEPARTMENT OF AGRICULTURE Rural Utilities Service Turning Point Solar LLC; Notice of Intent To... related to a proposal by Turning Point Solar LLC. The proposal consists of constructing a 49.9 megawatt...

  18. Revealing turning points in ecosystem functioning over the Northern Eurasian agricultural frontier.

    Science.gov (United States)

    Horion, Stéphanie; Prishchepov, Alexander V; Verbesselt, Jan; de Beurs, Kirsten; Tagesson, Torbern; Fensholt, Rasmus

    2016-08-01

    The collapse of the Soviet Union in 1991 has been a turning point in the World history that left a unique footprint on the Northern Eurasian ecosystems. Conducting large scale mapping of environmental change and separating between naturogenic and anthropogenic drivers is a difficult endeavor in such highly complex systems. In this research a piece-wise linear regression method was used for breakpoint detection in Rain-Use Efficiency (RUE) time series and a classification of ecosystem response types was produced. Supported by earth observation data, field data, and expert knowledge, this study provides empirical evidence regarding the occurrence of drastic changes in RUE (assessment of the timing, the direction and the significance of these changes) in Northern Eurasian ecosystems between 1982 and 2011. About 36% of the study area (3.4 million km(2) ) showed significant (P agricultural land abandonment. Our study also showed that recurrent droughts deeply affected vegetation productivity throughout the observation period, with a general worsening of the drought conditions in recent years. Moreover, recent human-induced turning points in ecosystem functioning were detected and attributed to ongoing recultivation and change in irrigation practices in the Volgograd region, and to increased salinization and increased grazing intensity around Lake Balkhash. The ecosystem-state assessment method introduced here proved to be a valuable support that highlighted hotspots of potentially altered ecosystems and allowed for disentangling human from climatic disturbances. © 2016 John Wiley & Sons Ltd.

  19. An application of eddy current damping effect on single point diamond turning of titanium alloys

    Science.gov (United States)

    Yip, W. S.; To, S.

    2017-11-01

    Titanium alloys Ti6Al4V (TC4) have been popularly applied in many industries. They have superior material properties including an excellent strength-to-weight ratio and corrosion resistance. However, they are regarded as difficult to cut materials; serious tool wear, a high level of cutting vibration and low surface integrity are always involved in machining processes especially in ultra-precision machining (UPM). In this paper, a novel hybrid machining technology using an eddy current damping effect is firstly introduced in UPM to suppress machining vibration and improve the machining performance of titanium alloys. A magnetic field was superimposed on samples during single point diamond turning (SPDT) by exposing the samples in between two permanent magnets. When the titanium alloys were rotated within a magnetic field in the SPDT, an eddy current was generated through a stationary magnetic field inside the titanium alloys. An eddy current generated its own magnetic field with the opposite direction of the external magnetic field leading a repulsive force, compensating for the machining vibration induced by the turning process. The experimental results showed a remarkable improvement in cutting force variation, a significant reduction in adhesive tool wear and an extreme long chip formation in comparison to normal SPDT of titanium alloys, suggesting the enhancement of the machinability of titanium alloys using an eddy current damping effect. An eddy current damping effect was firstly introduced in the area of UPM to deliver the results of outstanding machining performance.

  20. An application of eddy current damping effect on single point diamond turning of titanium alloys

    International Nuclear Information System (INIS)

    Yip, W S; To, S

    2017-01-01

    Titanium alloys Ti6Al4V (TC4) have been popularly applied in many industries. They have superior material properties including an excellent strength-to-weight ratio and corrosion resistance. However, they are regarded as difficult to cut materials; serious tool wear, a high level of cutting vibration and low surface integrity are always involved in machining processes especially in ultra-precision machining (UPM). In this paper, a novel hybrid machining technology using an eddy current damping effect is firstly introduced in UPM to suppress machining vibration and improve the machining performance of titanium alloys. A magnetic field was superimposed on samples during single point diamond turning (SPDT) by exposing the samples in between two permanent magnets. When the titanium alloys were rotated within a magnetic field in the SPDT, an eddy current was generated through a stationary magnetic field inside the titanium alloys. An eddy current generated its own magnetic field with the opposite direction of the external magnetic field leading a repulsive force, compensating for the machining vibration induced by the turning process. The experimental results showed a remarkable improvement in cutting force variation, a significant reduction in adhesive tool wear and an extreme long chip formation in comparison to normal SPDT of titanium alloys, suggesting the enhancement of the machinability of titanium alloys using an eddy current damping effect. An eddy current damping effect was firstly introduced in the area of UPM to deliver the results of outstanding machining performance. (paper)

  1. Streaming instabilities of a non-neutral plasma with turning points

    International Nuclear Information System (INIS)

    Turner, L.; Finn, J.M.

    1995-01-01

    Streaming instabilities of a reflexing beam in a slab model of a beam Penning trap or an inertial electrostatic confinement device are studied. Particles may have turning points that may be between the walls. Linear theory is developed for the case in which the self-field cancels the external potential. If the electric field perturbation is odd about the center, these two-stream modes couple the slow waves on the two beams. Even modes consist of two classes: a class of two-stream modes and another class of complex-frequency modes, coupling the slow and fast waves on the same beam. The latter are unstable over a larger range than the two-stream modes. Thermal spread is stabilizing only when the thermal and streaming velocities are comparable. Numerical results for the general class of equilibria show both two-stream-like modes and oscillating modes

  2. A Dynamic Model of the Environmental Kuznets Curve. Turning Point and Public Policy

    Energy Technology Data Exchange (ETDEWEB)

    Egli, H.; Steger, T.M. [CER-ETH Center of Economic Research at ETH Zurich, ZUE F 10, CH-8092 Zurich (Switzerland)

    2007-01-15

    We set up a simple dynamic macroeconomic model with (1) polluting consumption and a preference for a clean environment, (2) increasing returns in abatement giving rise to an EKC and (3) sustained growth resulting from a linear final-output technology. There are two sorts of market failures caused by external effects associated with consumption and environmental effort. The model is employed to investigate the determinants of the turning point and the cost effectiveness of different public policies aimed at a reduction of the environmental burden. Moreover, the model offers a potential explanation of an N-shaped pollution-income relation. It is shown that the model is compatible with most empirical regularities on economic growth and the environment.

  3. Turning points in international labor migration: a case study of Thailand.

    Science.gov (United States)

    Vasuprasat, P

    1994-01-01

    "This article describes the dynamics of the structural transformation of the Thai economy, labor migration and direct foreign investment and proposes an econometric model to explain the migration phenomenon. Though migration shifts have been significantly influenced by political factors such as the Gulf crisis and tensions with Saudi Arabia, economic factors such as the Thai government's liberalization of markets and the expansion of trade and direct foreign investment have contributed to changes in labor market needs. The economic conditions of a shift from net exporter to net importer for labor are posited in the model. The empirical results reveal a turning point in labor migration from Thailand and also confirm the contribution of commodity export in place of labor export in creating employment and income." excerpt

  4. Turning points towards sustainability: integrative science and policy for novel (but real landscape futures

    Directory of Open Access Journals (Sweden)

    David J. Brunckhorst

    2004-09-01

    Full Text Available Non-metropolitan landscapes are the major theatre of interactions where large-scale alteration occurs precipitated by local to global forces of economic, social and environmental change. However, these regional landscape effects are critical also to local natural resource and social sustainability, ecosystem health through to larger scales of biospheric functioning. The institutions contributing pressures and responses consequently shape future landscapes and in turn influence how social systems, resource users, governments and policy makers perceive those landscapes and their future. These are, in essence, complex social-ecological systems intertwined in a multitude of ways at many spatial scales across time. Over time, the cycles of complex social-ecological systems also reach crossroads, which might be crisis points at which future options are no longer available (possibly because of resource degradation or loss, or turning points where opportunities arise when it is easier to change direction towards more sustainable activities. This paper provides some examples of interdisciplinary research that has provided a holistic integration through close engagement with residents and communities or through deliberately implementing integrative high-risk ‘on-ground’ experimental models to ‘learn by doing’. In the final analysis, each project has characteristically, however, sought to integrate through spatial (if not temporal synthesis, policy analysis and (new or changed institutional arrangements that are relevant locally and corporately, as well as at broader levels of government and geography. This has provided transferable outcomes that can contribute real options and adaptive capacity for suitable positive futures.

  5. Nitrate transport and supply limitations quantified using high-frequency stream monitoring and turning point analysis

    Science.gov (United States)

    Jones, Christopher S.; Wang, Bo; Schilling, Keith E.; Chan, Kung-sik

    2017-06-01

    Agricultural landscapes often leak inorganic nitrogen to the stream network, usually in the form of nitrate-nitrite (NOx-N), degrading downstream water quality on both the local and regional scales. While the spatial distribution of nitrate sources has been delineated in many watersheds, less is known about the complicated temporal dynamics that drive stream NOx-N because traditional methods of stream grab sampling are often conducted at a low frequency. Deployment of accurate real-time, continuous measurement devices that have been developed in recent years enables high-frequency sampling that provides detailed information on the concentration-discharge relation and the timing of NOx-N delivery to streams. We aggregated 15-min interval NOx-N and discharge data over a nine-year period into daily averages and then used robust statistical methods to identify how the discharge regime within an artificially-drained agricultural watershed reflected catchment hydrology and NOx-N delivery pathways. We then quantified how transport and supply limitations varied from year-to-year and how dependence of these limitations varied with climate, especially drought. Our results show NOx-N concentrations increased linearly with discharge up to an average "turning point" of 1.42 mm of area-normalized discharge, after which concentrations decline with increasing discharge. We estimate transport and supply limitations to govern 57 and 43 percent, respectively, of the NOx-N flux over the nine-year period. Drought effects on the NOx-N flux linger for multiple years and this is reflected in a greater tendency toward supply limitations in the three years following drought. How the turning point varies with climate may aid in prediction of NOx-N loading in future climate regimes.

  6. The Nature of Child-Adult Interaction. From Turn-Taking to Understanding Pointing and Use of Pointing Gestures

    Directory of Open Access Journals (Sweden)

    Białek Arkadiusz

    2014-08-01

    Full Text Available Analyses of interactions between an adult and a one-year-old child are often connected with studying early communicative competences, e.g. the child’s participation in turn-taking sequences, in joint attention, and use of pointing gestures. Infants’ communicative behaviors were studied using a structured observational measure - the Early Social Communication Scales (Mundy et al., 2003 in a study of 358 12-month-old children. An exploratory factor analysis revealed: (i a distinction between the categories of initiation and response among the behaviors displayed, (ii simple and complex behavior categories occurring; (iii the presence within one factor of behaviors fulfilling various functions (e.g. requesting and sharing interest. An analysis of the results showed that communicative competences can be classified according to their level and ignoring their function, and made it possible to suggest modifications to the way in which behaviors are coded on the ESCS and to complement the procedure of studying early communicative competences.

  7. Brokdorf - the symbol for a political turning-point. Brokdorf - Symbol einer politischen Wende

    Energy Technology Data Exchange (ETDEWEB)

    Aust, S

    1981-01-01

    Brokdorf - this spot in the North of the F.R. of Germany designates a front which is no longer the only place where the argument of 'yes' or 'no' to nuclear energy is discussed. The citizens have lost their confidence in the competence of those governing, some concerns have betrayed them, politicians have lied, and the sufficiently-known German shortsightedness has kept up celebrating tradition - this is what has happened during the seven years' war about the Brokdorf nuclear power plant. For even without nuclear power the lights won't go out and the unemployment figures will not increase. In the meantime the heavy protests of environmentally-minded citizens against an industrial power which is solely orientated towards competition has seized all strata of our society. Now, since a handful of politicians are also timidly beginning to refuse to submit themselves to the alleged forces underlying the existing circumstances, the conflict between big industry and governmental power is programmed at least as far as topics of energy policy are concerned. A political turning-point. Or does the atomic state show its teeth because it is afraid of the democratic formation of a common will of those who it used to consider as an incapacitated herd of voters.

  8. Turning points in nonlinear business cycle theories, financial crisis and the 2007-2008 downturn.

    Science.gov (United States)

    Dore, Mohammed H I; Singh, Ragiv G

    2009-10-01

    This paper reviews three nonlinear dynamical business cycle theories of which only one (The Goodwin model) reflects the stylized facts of observed business cycles and has a plausible turning point mechanism. The paper then examines the US (and now global) financial crisis of 2008 and the accompanying downturn in the US. The paper argues that a skewed income distribution could not sustain effective demand and that over the 2001-2006 expansion demand was maintained through massive amounts of credit, with more than 50 percent of sales in the US being maintained through credit. A vector autoregression model confirms the crucial role played by credit. However legislative changes that dismantled the restrictions placed on the financial sector after the crash of 1929 and the consequent structural changes in the financial sector after 1980 enabled the growth of new debt instruments and credit. But overexpansion of credit when profits and house prices were declining in 2005/06 led to a nonlinear shift due to a new realization of the poor quality of some of this debt, namely mortgage backed securities. Bankruptcies, followed by retrenchment at the banks, then led to the bursting of the credit bubble, with the possibility of a severe recession.

  9. 1996, a turning point in the evolution of the EDF with good financial results

    International Nuclear Information System (INIS)

    1997-03-01

    This conference held on March 1997 presents the financial results obtained in 1996 by French Electricity Company EDF (Electricite de France). This year represented a turning point because essential landmarks were established in 1996. An european directive has been adopted in 1996 defining the framework in which european electricity market will function as well as the rules for its opening to competition. Discussions with the trade unions were conducted at the beginning of 1997 and a social agreement aiming at the amelioration of services and hiring of 11,000 to 15,000 young people in the next three years. Finally, a new contract of enterprise with the state has been discussed and approved in March 5, 1997, which redefined the place and the role of EDF in the French economy, in the new stage of electricity market started by the opening to competition. The document contains the following 8 chapters: 1. Financial results and enterprise management; 2. Institutional frame and the relation with the state; 3. Development in France; 4. International development; 5. Alliances, partnerships and cooperation; 6. Management, social and human resources; 7. Environment; 8. Technical results

  10. Life shocks and crime: a test of the "turning point" hypothesis.

    Science.gov (United States)

    Corman, Hope; Noonan, Kelly; Reichman, Nancy E; Schwartz-Soicher, Ofira

    2011-08-01

    Other researchers have posited that important events in men's lives-such as employment, marriage, and parenthood-strengthen their social ties and lead them to refrain from crime. A challenge in empirically testing this hypothesis has been the issue of self-selection into life transitions. This study contributes to this literature by estimating the effects of an exogenous life shock on crime. We use data from the Fragile Families and Child Wellbeing Study, augmented with information from hospital medical records, to estimate the effects of the birth of a child with a severe health problem on the likelihood that the infant's father engages in illegal activities. We conduct a number of auxiliary analyses to examine exogeneity assumptions. We find that having an infant born with a severe health condition increases the likelihood that the father is convicted of a crime in the three-year period following the birth of the child, and at least part of the effect appears to operate through work and changes in parental relationships. These results provide evidence that life events can cause crime and, as such, support the "turning point" hypothesis.

  11. Turning point: the Robert Wood Johnson Foundation's effort to revitalize public health at the state level.

    Science.gov (United States)

    Hassmiller, Susan

    2002-01-01

    The Robert Wood Johnson (RWJ) Foundation initiated Turning Point in collaboration with the W.K. Kellogg Foundation (Kellogg) in 1997. The purpose of this major national initiative was to strengthen the public health infrastructure in the United States so that states, local communities, and their public health agencies might respond to the challenge to protect and improve the public's health in the 21st century. RWJ funded 21 states and Kellogg funded 43 communities to work together to create a new way of thinking about how health could be improved and who should be involved. Although the ultimate outcome was to improve health, both foundations expected diverse partnerships to work together to create strategic health improvement plans at both the community and state levels. The foundations funded a variety of strategies within those health improvement plans during an implementation phase. The premise in funding partnerships, as opposed to a single entity, was that effective public health systems would be developed best through a shared responsibility (including the private sector) for the health of a community.

  12. Making the case: leveraging resources toward public health system improvement in Turning Point states.

    Science.gov (United States)

    Bekemeier, Betty; Riley, Catharine M; Padgett, Stephen M; Berkowitz, Bobbie

    2007-01-01

    Leveraging funds to sustain the efforts of a grant-funded initiative is often an explicit, or implicit, expectation in philanthropy. However, the magnitude of funds leveraged and the factors that facilitate success in leveraging are rarely researched. An example of one of these grant-funded initiatives is the National Turning Point Initiative. Twenty-one states received funding from The Robert Wood Johnson Foundation as part of this initiative to establish and implement strategic goals for achieving significant statewide public health system improvement through diverse, cross-sector partnerships. Leaders from 17 of these 21 states participated in a two-phased study regarding the leveraging of additional funds for their public health infrastructure improvement activities. This article reports on the second phase of the study. In this phase, key informant interviews were conducted to examine how leveraging of resources occurred as part of this large national initiative. Findings indicate that the combination of a comprehensive planning process and a broad-based partnership was crucial in securing resources to expand their efforts. The ability to strategically respond to unexpected events and opportunities also helped states use their plans and partnerships to "make the case" for additional resources to improve their public health infrastructure.

  13. Managing Contextual Complexity in an Experiential Learning Course: A Dynamic Systems Approach through the Identification of Turning Points in Students' Emotional Trajectories

    Directory of Open Access Journals (Sweden)

    Gloria Nogueiras

    2017-05-01

    Full Text Available This study adopts a dynamic systems approach to investigate how individuals successfully manage contextual complexity. To that end, we tracked individuals' emotional trajectories during a challenging training course, seeking qualitative changes–turning points—and we tested their relationship with the perceived complexity of the training. The research context was a 5-day higher education course based on process-oriented experiential learning, and the sample consisted of 17 students. The students used a five-point Likert scale to rate the intensity of 16 emotions and the complexity of the training on 8 measurement points. Monte Carlo permutation tests enabled to identify 30 turning points in the 272 emotional trajectories analyzed (17 students * 16 emotions each. 83% of the turning points indicated a change of pattern in the emotional trajectories that consisted of: (a increasingly intense positive emotions or (b decreasingly intense negative emotions. These turning points also coincided with particularly complex periods in the training as perceived by the participants (p = 0.003, and p = 0.001 respectively. The relationship between positively-trended turning points in the students' emotional trajectories and the complexity of the training may be interpreted as evidence of a successful management of the cognitive conflict arising from the clash between the students' prior ways of meaning-making and the challenging demands of the training. One of the strengths of this study is that it provides a relatively simple procedure for identifying turning points in developmental trajectories, which can be applied to various longitudinal experiences that are very common in educational and developmental contexts. Additionally, the findings contribute to sustaining that the assumption that complex contextual demands lead unfailingly to individuals' learning is incomplete. Instead, it is how individuals manage complexity which may or may not lead to

  14. Postural strategies and sensory integration: no turning point between childhood and adolescence.

    Directory of Open Access Journals (Sweden)

    Sophie Mallau

    reweighting for postural strategies as assessed by very slow support oscillations presents a linear development without any qualitative turning point between childhood and adolescence.

  15. Points of Interest: What Determines Interest Rates?

    Science.gov (United States)

    Schilling, Tim

    Interest rates can significantly influence people's behavior. When rates decline, homeowners rush to buy new homes and refinance old mortgages; automobile buyers scramble to buy new cars; the stock market soars, and people tend to feel more optimistic about the future. But even though individuals respond to changes in rates, they may not fully…

  16. Are Mentor Relationships Helping Organizations? An Exploration of Developing Mentee-Mentor-Organizational Identifications Using Turning Point Analysis.

    Science.gov (United States)

    Bullis, Connie; Bach, Betsy Wackernagel

    1989-01-01

    Examines developing mentor relationships and the association between mentor relationships and individual-organizational relationships. Indicates that many turning points occur later than proposed in broad-phase models of mentor relationship development. Finds that mentor relationships should not be assumed to benefit organizations. (SR)

  17. Expectation of fairness: a turning point in the professional satisfaction of Iranian nurses.

    Science.gov (United States)

    Rafii, Forough; Nasrabadi, Alireza Nikbakht; Forooshani, Zahra Sadat Dibaji

    2016-06-01

    The professional satisfaction of staff is one of the most challenging organizational concepts that can enhance the efficiency level of organizations. In a similar vein, the professional satisfaction of nurses is of considerable importance, in that, professional dissatisfaction among nurses could result in emotional detachment, depression, anger, evasion from work, and inefficacy and would negatively impact the organization's work rate. The aim of this study was to understand Iranian nurses' experiences of the concept of professional satisfaction. This was a qualitative study conducted with a targeted sampling of 10 nurses (4 men and 6 women) in 2015. The data were collected through conducting in-depth interviews, and textual data were analyzed subsequently using the Qualitative Content Analysis (QCA) method. The findings of this study pointed to "fair conduct," which was comprised of three sub-categories, i.e., expectation of fairness in social-professional settings, expectation of fairness in receiving professional benefits, and expectation of fairness in the area of professional interactions. There are various ups and downs in nursing due to the challenging nature of the profession, from the initial education at the university until retirement. According to the findings of this study, a lack of fairness in social-professional settings, a lack of fairness in receiving professional benefits, and a lack of fairness in the area of professional interactions were among the factors that have great impacts on the degree of professional dissatisfaction among nurses.

  18. Fabrication of fiber optic long period gratings operating at the phase matching turning point using an amplitude mask

    Science.gov (United States)

    Hromadka, J.; Correia, R.; Korposh, S.

    2016-05-01

    A fast method for the fabrication of the long period gratings (LPG) optical fibres operating at or near the phase matching turning point (PMTP) with the period of 109.0, 109.5 and 110.0 μm based on an amplitude mask writing system is described. The proposed system allows fabricating 3 cm long LPG sensors operating at PMPT within 20 min that is approximately 8 times faster than point-by-point approach. The reproducibility of the fabrication process was thoroughly studied. The response of the fabricated LPGs to the external change of the refractive index was investigated using water and methanol.

  19. Skiba points for small discount rates

    NARCIS (Netherlands)

    Wagener, F.O.O.

    2006-01-01

    The present article uses perturbation techniques to approximate the value function of an economic minimization problem for small values of the discount rate. This can be used to obtain the approximate location of the Skiba states in the problem; these are states for which there are two distinct

  20. The complexity of interior point methods for solving discounted turn-based stochastic games

    DEFF Research Database (Denmark)

    Hansen, Thomas Dueholm; Ibsen-Jensen, Rasmus

    2013-01-01

    for general 2TBSGs. This implies that a number of interior point methods can be used to solve 2TBSGs. We consider two such algorithms: the unified interior point method of Kojima, Megiddo, Noma, and Yoshise, and the interior point potential reduction algorithm of Kojima, Megiddo, and Ye. The algorithms run...... states and discount factor γ we get κ=Θ(n(1−γ)2) , −δ=Θ(n√1−γ) , and 1/θ=Θ(n(1−γ)2) in the worst case. The lower bounds for κ, − δ, and 1/θ are all obtained using the same family of deterministic games....

  1. Coupling effects on turning points of infectious diseases epidemics in scale-free networks

    OpenAIRE

    Kim, Kiseong; Lee, Sangyeon; Lee, Doheon; Lee, Kwang Hyung

    2017-01-01

    Background Pandemic is a typical spreading phenomenon that can be observed in the human society and is dependent on the structure of the social network. The Susceptible-Infective-Recovered (SIR) model describes spreading phenomena using two spreading factors; contagiousness (?) and recovery rate (?). Some network models are trying to reflect the social network, but the real structure is difficult to uncover. Methods We have developed a spreading phenomenon simulator that can input the epidemi...

  2. Turning point for US diets? Recessionary effects or behavioral shifts in foods purchased and consumed.

    Science.gov (United States)

    Ng, Shu Wen; Slining, Meghan M; Popkin, Barry M

    2014-03-01

    In the past decade, the United States has seen declining energy intakes and plateauing obesity levels. We examined whether these observed trends suggest a longer-term shift in dietary and health behavior that is independent of adverse economic conditions. We used nationally representative cross-sectional surveys on intake and longitudinal household food purchase data along with random-effects models to address this question. Data included individuals in NHANES 2003-2004 to 2009-2010 (children: n = 13,422; adults: n = 10,791) and households from the 2000-2011 Nielsen Homescan Panel (households with children: n = 57,298; households with adults only: n = 108,932). In both data sets, we showed that children decreased their calories the most. Even after we controlled for important socioeconomic factors, caloric purchases fell significantly from 2003 to 2011 (P purchases, in which a 1-percentage point increase in unemployment in the local market was associated with a 1.6-4.1-kcal · capita⁻¹ · d⁻¹ (P purchased. Results also indicated shifts in caloric purchases were driven more by declines in caloric purchases from beverages than food. US consumers have exhibited changes in intake and purchasing behavior since 2003 that were independent from changing economic conditions linked with the Great Recession or food prices. Public health efforts in the past decade may have contributed to this trend.

  3. A turning point in the concept of justice: from Adam Smith to John Stuart Mill

    Directory of Open Access Journals (Sweden)

    Estrella Trincado Aznar

    2012-01-01

    Full Text Available Classical economists, John Stuart Mill included, based their theories on Adam Smith’s system. At some point, they labelled it as a "utilitarian" theory. However, Smith was non-utilitarian, perhaps even anti-utilitarian. One of the most amazing differences between classical economics versus Smithian theory consists of their concept of justice. Classical economics were based on a utilitarian concept; Smith criticizes the concept of utilitarian justice. Utility being a subjective picture, classical economists find it more difficult to draw limits to state intervention than Smith does. This paper compares Smith’s and John Stuart Mill’s concept of justice when they make the case for land tenure. Mill admits that society cannot properly be said to owe anything to the poor. However, not arguing from 'abstract rights,' but from 'utility' understood in its largest sense, Mill defended the nationalization of land. Mill was unable to draw any limits to state intervention. Conversely, Smith defended that justice is not a utilitarian concept. In this case, limits to state intervention are more easily drawn.

  4. A turning point in the concept of justice: from Adam Smith to John Stuart Mill

    Directory of Open Access Journals (Sweden)

    Estrella Trincado Aznar

    2015-07-01

    Full Text Available Classical economists, John Stuart Mill included, based their theories on Adam Smith’s system. At some point, they labelled it as a "utilitarian" theory. However, Smith was non-utilitarian, perhaps even anti-utilitarian. One of the most amazing differences between classical economics versus Smithian theory consists of their concept of justice. Classical economics were based on a utilitarian concept; Smith criticizes the concept of utilitarian justice. Utility being a subjective picture, classical economists find it more difficult to draw limits to state intervention than Smith does. This paper compares Smith’s and John Stuart Mill’s concept of justice when they make the case for land tenure. Mill admits that society cannot properly be said to owe anything to the poor. However, not arguing from 'abstract rights,' but from 'utility' understood in its largest sense, Mill defended the nationalization of land. Mill was unable to draw any limits to state intervention. Conversely, Smith defended that justice is not a utilitarian concept. In this case, limits to state intervention are more easily drawn.

  5. Turning point or selection? The effect of rustication on subsequent health for the Chinese Cultural Revolution cohort.

    Science.gov (United States)

    Fan, Wen

    2016-05-01

    During the Chinese Cultural Revolution (1966-76), Chairman Mao sent 17 million urban youth to rural areas to be "reeducated." These "sent-down" youth spent years working alongside peasants, enduring inadequate diets, shelter and medical attention. What were the consequences for subsequent health? Was there a benefit to individuals in the leading or trailing edges of this cohort? Was this a fundamental turning point or were selection process at work? Drawing on the 1994 State and Life Chances in Urban China Survey, I find the health disadvantage at midlife is mostly borne by members of the trailing-edge sub-cohort who lived in the countryside for more than five years. Results from propensity-score analysis indicate a selection process: those who suffered most came from disadvantaged backgrounds. Life chances following the rusticates' return home, however, either do not differ from those who stayed in cities or do not relate to health, refuting the turning-point view, at least in terms of midlife health. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Noncontact on-machine measurement system based on capacitive displacement sensors for single-point diamond turning

    Science.gov (United States)

    Li, Xingchang; Zhang, Zhiyu; Hu, Haifei; Li, Yingjie; Xiong, Ling; Zhang, Xuejun; Yan, Jiwang

    2018-04-01

    On-machine measurements can improve the form accuracy of optical surfaces in single-point diamond turning applications; however, commercially available linear variable differential transformer sensors are inaccurate and can potentially scratch the surface. We present an on-machine measurement system based on capacitive displacement sensors for high-precision optical surfaces. In the proposed system, a position-trigger method of measurement was developed to ensure strict correspondence between the measurement points and the measurement data with no intervening time-delay. In addition, a double-sensor measurement was proposed to reduce the electric signal noise during spindle rotation. Using the proposed system, the repeatability of 80-nm peak-to-valley (PV) and 8-nm root-mean-square (RMS) was achieved through analyzing four successive measurement results. The accuracy of 109-nm PV and 14-nm RMS was obtained by comparing with the interferometer measurement result. An aluminum spherical mirror with a diameter of 300 mm was fabricated, and the resulting measured form error after one compensation cut was decreased to 254 nm in PV and 52 nm in RMS. These results confirm that the measurements of the surface form errors were successfully used to modify the cutting tool path during the compensation cut, thereby ensuring that the diamond turning process was more deterministic. In addition, the results show that the noise level was significantly reduced with the reference sensor even under a high rotational speed.

  7. The Machadian turning point

    Directory of Open Access Journals (Sweden)

    Roberto Schwarz

    Full Text Available The article examines the evolution of the works of Machado de Assis and stresses their exceptionality within the Brazilian postcolonial literary context, focusing on the author's thematic and formal volte-face with regard to the novels of the first phase. From Memórias póstumas de Brás Cubas - The Posthumous Memoirs of Bras Cubas, often subtitled as the Epitaph of a Small Winner - (1880 on, Machadian fiction takes on a new composition principle, which challenges the conventions dictated by realism and whose uniqueness lies in the narrator's arbitrary and transgressive development. While the narrative sets a tone that is both cosmopolitan and universalizing in dealing with local matters, it takes on the perspective of the lordly class. By identifying the events that constitute this procedure, the author highlights the literary genius and the scope of the Machadian view on the particularities of social relations in Brazil.

  8. World must build two atomic reactors each day the next hundred years. [Summary of and commentary on book, 'Mankind at the Turning Point'

    Energy Technology Data Exchange (ETDEWEB)

    1974-07-24

    In summarizing and commenting on the ideas presented in Mesarovic and Pestel's book ''Mankind at the Turning Point'' it is pointed out that the global energy crisis makes comprehensive long-term planning a necessity. Assuming, optimistically, that nuclear power alone is able to supply the total projected energy demand in 100 years, it is stated that this will require 3000 nuclear power stations, each with 8 fast breeder reactors, totally 100 GW(t). This means a net rate of construction of four reactors per week, which again means allowing for a 30-year life, two reactors per day, every day, for the next hundred years. Fueling of these reactors will require the production and transport of 15 x 10/sup 6/ kg of /sup 239/Pu per year. It is therefore obvious that the energy crisis is not only a technological, but also a political, social, and even psychological problem.

  9. World must build two atomic reactors each day the next hundred years. [Summary of and commentary on book, 'Mankind at the Turning Point'

    Energy Technology Data Exchange (ETDEWEB)

    1974-07-24

    In summarizing and commenting on the ideas presented in Mesarovic and Pestel's book ''Mankind at the Turning Point'' it is pointed out that the global energy crisis makes comprehensive long-term planning a necessity. Assuming, optimistically, that nuclear power alone is able to supply the total projected energy demand in 100 years, it is stated that this will require 3000 nuclear power stations, each with 8 fast breeder reactors, totally 100 GW(t). This means a net rate of construction of four reactors per week, which again means allowing for a 30-year life, two reactors per day, every day, for the next hundred years. Fueling of these reactors will require the production and transport of 15 x 10/sup 6/ kg of /sup 239/Pu per year. It is therefore obvious that the energy crisis is not only a technological, but also a political, social, and even psychological problem.

  10. [INVITED] Design of turn around point long period fiber grating sensor with Au-nanoparticle self monolayer

    Science.gov (United States)

    Bandyopadhyay, Sankhyabrata; Basumallick, Nandini; Bysakh, Sandip; Dey, Tanoy Kumar; Biswas, Palas; Bandyopadhyay, Somnath

    2018-06-01

    In this paper studies on the design and fabrication of a long period fiber grating (LPFG) with a self mono layer of gold nanoparticle (AuNP) has been presented. Refractive index (RI) sensitivity of a dispersed cladding mode (DCM) near turn around point (TAP) of its phase matching curve (PMC) has been investigated with and also without AuNP coated LPFG. The typical role played by the intermediate layer of AuNP on the effective index and thus on the sensitivity of the cladding mode to the surrounding RI has also been explored by carrying out coupled mode analysis of the requisite multilayer waveguide. Deposition of AuNP enhanced the sensitivity by more than a factor of 2. Measured sensitivity was found to be ∼3928 nm/refractive index unit (RIU) in the range of 1.3333-1.3428.

  11. A Turning Point in the Translation of Shakespeare into Catalan: The Case of Josep M. De Sagarra’s Macbeth

    Directory of Open Access Journals (Sweden)

    Berjaga Vanessa Palomo

    2017-12-01

    Full Text Available Josep Maria de Sagarra translated twenty-eight of Shakespeare’s plays into Catalan in the early forties, at a time when Catalan language and culture were suffering severe repression due to Franco’s regime. The manuscript of Macbeth by Sagarra is from 1942; and the first edition (an impressive hard-bound clandestine edition is from 1946 or 1947. Before his translation, there were three other Catalan translations of Macbeth, produced by Cebrià Montoliu (1907, Diego Ruiz (1908 and Cèsar August Jordana (1928. The main purpose of this article is to show that Sagarra’s translations marked a turning point regarding the translation of Shakespeare’s works in Catalan culture. This is done by reflecting on both cultural and personal circumstances that led Sagarra to translate Shakespeare and by comparing Sagarra’s translation of Macbeth with the other three from the first half of the twentieth century.

  12. The Turning Point for Morphomechanical Remodeling During Complete Intestinal Obstruction in Rats Occurs After 12-24 h.

    Science.gov (United States)

    Sun, Daming; Zhao, Jingbo; Liao, Donghua; Huang, Zhiyong; Gregersen, Hans

    2018-05-01

    Intestinal obstruction prompts luminal dilation and wall remodeling proximal to the site of obstruction. Studies on temporal and spatial morphomechanical remodeling are needed for comprehending the pathophysiology of acute intestinal obstruction. The aim was to estimate the no-load and zero-stress morphomechanical properties in circumferential and longitudinal direction at 0, 6, 12, 24, 36, and 48 h after complete intestinal obstruction. Obstruction of the distal ileum was created surgically by placement of a polyethylene ring for up to 48 h in 30 rats. Sham and normal groups were also studied (n = 12). Five 6 cm-long intestinal segments proximal to the obstruction site were used for histological, morphometric and mechanical analysis at the designated times. Morphomechanical changes were huge but only subtle changes were observed between the 5 segments during the obstruction period. Due to dilation, the serosal length and mucosal length increased continuously from 6 to 48 h (p h and beyond (p h where after the opening angle increased and the bending angle returned to pre-obstruction levels. For the residual stretch ratios and the position of the neutral axis the turning point was found after 24 h. Histologically, the thickness and area of most wall layers were quite stable for the first 12 h but with an increase at the 24 h time point that continued to the 48 h time point. The most pronounced change was found for the circumferential muscle layer (p h after creating the obstruction.

  13. Effect of Pedestrians on the Saturation Flow Rate of Right Turn Movements at Signalized Intersection - Case Study from Rasht City

    Science.gov (United States)

    Roshani, Mostafa; Bargegol, Iraj

    2017-10-01

    Saturation flow rate is one of the important items in the analysis of the capacity of signalized intersections that are affected by some factors. Pedestrian crossing on signalized intersection is one of the factors which influence the vehicles flow. In addition, the released researches determined that the greatest impact of pedestrian on the saturation flow occurred in the Conflict zone where the highest chance of the encounter of pedestrians and vehicles has in turning movements. The purpose of this paper is to estimate the saturation flow rate considering the effect of a pedestrian on right turn movements of the signalized intersections in Rasht city. For this goal, 6 signalized intersections with 90 cycles of reviews were selected for the estimation of saturation flow rate by the microscopic method and also 3 right turn lanes containing radius differences with 70 cycles of reviews were collected for the investigation of the pedestrians’ effects. Each phase of right turn lanes cycle was divided in the pieces of 10-second period which was totally 476 sample volumes of considered pedestrians and vehicles at that period. Only 101 samples of those were ranged as saturated conditions. Finally, using different regression models, the best relationship between pedestrian’s volume and right turning vehicles flow parameters was evaluated. The results indicate that there is a primarily linear relationship between pedestrian volume and right turning vehicles flow with R2=0.6261. According to this regression model with the increase in pedestrians, saturation flow rate will be reduced. In addition, by comparing the adjustment factor obtained in the present study and other studies, it was found that the effect of pedestrians on the right-turn movements in Rasht city is less than the rest of the world.

  14. L'aplicació TurningPoint com a eina d'aprenentatge transformacional en els processos educatius

    Directory of Open Access Journals (Sweden)

    Antonio Marín García

    2016-06-01

    Full Text Available El projecte de convergència educativa impulsat per l'Espai Europeu d'Educació Superior (EEES ha generat noves metodologies docents i processos d'avaluació en els sistemes d'educació universitaris. Aquest nou plantejament pedagògic genera una inqüestionable oportunitat perquè els distints segments de la comunitat universitària vegen en les TIC una ferramenta fonamental per a l'elaboració de continguts docents que faciliten el procés ensenyança-aprenentatge. Aquest article presenta la ferramenta TurningPoint, que es centra en afavorir la interacció docent-alumne, facilitant la participació i l'avaluació contínua. Aquesta ferramenta presenta avantatges enfront d'altres aplicacions existents a causa de la seua varietat d'utilitats i potencial d'ús, i ha sigut utilitzada amb èxit a diversos programes promoguts per la Facultat d'Economia de la Universitat de València. 

  15. Establishing meaningful cut points for online user ratings.

    Science.gov (United States)

    Hirschfeld, Gerrit; Thielsch, Meinald T

    2015-01-01

    Subjective perceptions of websites can be reliably measured with questionnaires. But it is unclear how such scores should be interpreted in practice, e.g. is an aesthetics score of 4 points on a seven-point-scale satisfactory? The current paper introduces a receiver-operating characteristic (ROC)-based methodology to establish meaningful cut points for the VisAWI (visual aesthetics of websites inventory) and its short form the VisAWI-S. In two studies we use users' global ratings (UGRs) and website rankings as anchors. A total of 972 participants took part in the studies which yielded similar results. First, one-item UGRs correlate highly with the VisAWI. Second, cut points on the VisAWI reliably differentiate between sites that are perceived as attractive versus unattractive. Third, these cut points are variable, but only within a certain range. Together the research presented here establishes a score of 4.5 on the VisAWI which is a reasonable goal for website designers and highlights the utility of the ROC methodology to derive relevant scores for rating scales.

  16. Fixed-Rate Compressed Floating-Point Arrays.

    Science.gov (United States)

    Lindstrom, Peter

    2014-12-01

    Current compression schemes for floating-point data commonly take fixed-precision values and compress them to a variable-length bit stream, complicating memory management and random access. We present a fixed-rate, near-lossless compression scheme that maps small blocks of 4(d) values in d dimensions to a fixed, user-specified number of bits per block, thereby allowing read and write random access to compressed floating-point data at block granularity. Our approach is inspired by fixed-rate texture compression methods widely adopted in graphics hardware, but has been tailored to the high dynamic range and precision demands of scientific applications. Our compressor is based on a new, lifted, orthogonal block transform and embedded coding, allowing each per-block bit stream to be truncated at any point if desired, thus facilitating bit rate selection using a single compression scheme. To avoid compression or decompression upon every data access, we employ a software write-back cache of uncompressed blocks. Our compressor has been designed with computational simplicity and speed in mind to allow for the possibility of a hardware implementation, and uses only a small number of fixed-point arithmetic operations per compressed value. We demonstrate the viability and benefits of lossy compression in several applications, including visualization, quantitative data analysis, and numerical simulation.

  17. effect of turning parameters on metal removal and tool wear rates

    African Journals Online (AJOL)

    user

    2 SCHOOL OF AEROSPACE, TRANSPORT AND MANUFACTURING, CRANFIELD UNIV., ... AISI 1018 low carbon steel during turning operation to reduce tooling costs as a result of tool wear and achieve optimum metal ... performance of a system, part or component while ... traditional and experimental design methods of.

  18. Keys to successful diabetes self-management for uninsured patients: social support, observational learning, and turning points: a safety net providers' strategic alliance study.

    Science.gov (United States)

    Madden, Melissa Hanahan; Tomsik, Philip; Terchek, Joshua; Navracruz, Lisa; Reichsman, Ann; Clark, Terri Clemons; Cella, Peggi; Weirich, Stephen A; Munson, Michelle R; Werner, James J

    2011-03-01

    To examine how medically uninsured patients who receive health care at federally qualified health centers and free clinics are able to successfully self-manage diabetes compared to patients who are less successful. Two distinct groups of patients with diabetes for 6 months or longer were enrolled: (1) successful, defined as those with glycated hemoglobin (HbA1c) of 7% or less or a recent improvement of at least 2% (n=17); and (2) unsuccessful, defined as patients with HbAlc of at least 9% (n=9) and without recent improvement. Patients were interviewed about enabling factors, motivators, resources, and barriers to diabetes self-management. Data from interviews, chart reviews, and clinician surveys were analyzed using qualitative methods and statistical techniques. African Americans comprised 57.7% of the sample and whites 38.5% (N=26). No significant differences were detected between successful and unsuccessful groups in age, race, education, or employment status. Clinicians rated unsuccessful patients as having more severe diabetes and significantly lower levels of control than successful patients. Compared to unsuccessful patients, successful patients more often reported having friends or family with diabetes, more frequently sought information about the disease, used evidence-based self-management strategies, held more accurate perceptions of their own diabetes control, and experienced "turning point" events that motivated increased efforts in disease management. Patients who successfully managed diabetes learned from diabetic family members and interpreted disease-related events as motivational turning points. It may be beneficial to incorporate social learning and motivational enhancement into diabetes interventions to increase patients' motivation for improved levels of self-management.

  19. TOWARDS COLLABORATION BETWEEN PUBLIC WELFARE AGENCIES AND MASS ENTERTAINMENT MEDIA TO BRING ABOUT A TURNING POINT STAGE IN THE LIVES OF BATTERED WOMEN

    Directory of Open Access Journals (Sweden)

    Nourit Segev

    2010-06-01

    Full Text Available This article examines the promoting and impeding factors that advance the turning point in thelives of battered women. The subject is important because of the contribution of the turning pointstage to the ability of women to leave the violent relationship and the way in which the publicwelfare agencies become involved in order to help the victim to advance towards the turning point.The article also reviews the influence of the entertainment media in shaping the positions of thepublic regarding marital violence, the presentation of battered women in the media, and theconnection between their media presentation and their advancement towards the turning point inreality.The research is based on a combination of qualitative and quantitative data, and focuses on contentanalysis. The qualitative content analysis included 40 journal articles, 1 documentary film and onedrama series, the personal interviews included 8 social workers and 6 journalists, and the focusgroup included 8 battered women. The findings indicate an awareness of battered women in thevarious media, and of a gap between the perception of social workers and the journalists regardingthe role of the media in raising social problems.The article calls for cooperation between the media and the professionals in order to construct messages of empowerment that will enable women to advance towards the turning point in theirlives.

  20. Transitions in state public health law: comparative analysis of state public health law reform following the Turning Point Model State Public Health Act.

    Science.gov (United States)

    Meier, Benjamin Mason; Hodge, James G; Gebbie, Kristine M

    2009-03-01

    Given the public health importance of law modernization, we undertook a comparative analysis of policy efforts in 4 states (Alaska, South Carolina, Wisconsin, and Nebraska) that have considered public health law reform based on the Turning Point Model State Public Health Act. Through national legislative tracking and state case studies, we investigated how the Turning Point Act's model legal language has been considered for incorporation into state law and analyzed key facilitating and inhibiting factors for public health law reform. Our findings provide the practice community with a research base to facilitate further law reform and inform future scholarship on the role of law as a determinant of the public's health.

  1. Fixation of operating point and measurement of turn on characteristics of IGBT F4-75R06W1E3

    Science.gov (United States)

    Haseena, A.; Subhash Joshi T., G.; George, Saly

    2018-05-01

    For the proficient operation of the Power electronic circuit, signal level performance of power electronic devices are very important. For getting good signal level characteristics, fixing operating point is very critical. Device deviates from the typical characteristics given in the datasheet due to the presence of stray components in the circuit lay out. Fixation of operating point of typical silicon IGBT and its turn on characteristics is discussed in this paper.

  2. Detection rates of geckos in visual surveys: Turning confounding variables into useful knowledge

    Science.gov (United States)

    Lardner, Bjorn; Rodda, Gordon H.; Yackel Adams, Amy A.; Savidge, Julie A.; Reed, Robert N.

    2016-01-01

    Transect surveys without some means of estimating detection probabilities generate population size indices prone to bias because survey conditions differ in time and space. Knowing what causes such bias can help guide the collection of relevant survey covariates, correct the survey data, anticipate situations where bias might be unacceptably large, and elucidate the ecology of target species. We used negative binomial regression to evaluate confounding variables for gecko (primarily Hemidactylus frenatus and Lepidodactylus lugubris) counts on 220-m-long transects surveyed at night, primarily for snakes, on 9,475 occasions. Searchers differed in gecko detection rates by up to a factor of six. The worst and best headlamps differed by a factor of at least two. Strong winds had a negative effect potentially as large as those of searchers or headlamps. More geckos were seen during wet weather conditions, but the effect size was small. Compared with a detection nadir during waxing gibbous (nearly full) moons above the horizon, we saw 28% more geckos during waning crescent moons below the horizon. A sine function suggested that we saw 24% more geckos at the end of the wet season than at the end of the dry season. Fluctuations on a longer timescale also were verified. Disturbingly, corrected data exhibited strong short-term fluctuations that covariates apparently failed to capture. Although some biases can be addressed with measured covariates, others will be difficult to eliminate as a significant source of error in longterm monitoring programs.

  3. Turns prediction : Turns prediction

    OpenAIRE

    Fuchs, Patrick; Etchebest, Catherine; De Brevern, Alexandre

    2007-01-01

    The description of protein 3D structure usually focuses on the repetitive local folds (alpha-helices and beta-sheets). The remaining class, sometimes called unordered region, has often been considered as random (one also calls it ‘random coil'). However, some interesting local folds are also highly recurrent and definitely more structured than a real random region. One of such particularly interesting motif is tight turn; this latter is characterized by few residues (3 to 5) and by the revers...

  4. Auto-ethnographical investigation of turning points in dance education – a method for creating awareness of one’s own pre-understanding in qualitative research

    Directory of Open Access Journals (Sweden)

    Trine Ørbæk

    2013-06-01

    Full Text Available This article presents an auto-ethnographical investigation of a pedagogical practice in creative dance education. This research is a part of the PhD-project “To create dance” in physical education teacher education based at The Norwegian School of Sport Sciences and The Norwegian National Graduate School in Teacher Education. The method used is based on life stories, and turning points are used as analytical tools. The turning point analysis highlights that an auto-ethnographical investigation is relevant when it comes to creating awareness of pre-understandings in the development of pedagogical experiences from one’s own research field. In addition, the article shows that the turning point analysis may contribute to increasing knowledge on how one’s own experience can change when narrated in new ways. Finally, the study shows that making use of auto-ethnography may also have value as a reflexive approach for becoming more conscious of one’s own research process.

  5. General Case in Determining Center-To-Center Spacing Between the Screw and the Roller in a Roller Drive, and Initial Contact Point of Their Mating Thread Turns. Development of Calculation Method and Software

    Directory of Open Access Journals (Sweden)

    D. S. Blinov

    2017-01-01

    Full Text Available One of the most important trends in development of machine engineering is to improve load capacity of mechanisms, assemblies and parts without increasing their overall dimensions and weight. This is also relevant to the most promising items so far, i.e. orbital roller drives (ORD, which are the rotational-to-progressive motion converters widely used in vehicles. The previously published article suggested increasing a load capacity (by about 15% through reducing a thread turn section angle of the threaded ORD components and change of the radius of roller thread turn section outline. Due to such ORD modification, a number of the most critical ORD parameters are to be changed thereby demanding further research. Further, the article published suggests a method considering the abovementioned changes to calculate the dimensions of ORD main components and their tolerance ranges.Though this method being not complete as the increment of ORD center-to-center spacing in relation to its rated value, required for assembly, is unknown; and to determine the ORD center-to-center spacing increment, outer diameters of the roller and screw threads are to be known. Hence, these two methods are interconnected.This article presents the numerical calculation method, mathematical support and method to determine the increment of ORD center-to-center spacing and initial contact point of the mating roller and screw thread turns. Due to considerable scope of calculations, the method was turned into the software.Similar calculation methods and techniques were developed to a particular case, where the thread turn section angle of the threaded components was of 90°, and the roller thread turn section outline was a circular arc centered to the roller axis. Hence the developed numerical calculation method, mathematical support and technique refer to the general case which is to determine the ORD center-to-center spacing increment and initial contact point of the mating roller

  6. Turned on/turned off

    DEFF Research Database (Denmark)

    Petersen, Eva Bendix

    2016-01-01

    position, it attempts to sense into the lived experience of being subject to, and of, turns in social theory. As a whole the paper seeks to work with and allow for multiplicity in tone, focus, researcher positioning, reader positioning, and more, to see what knowledge that does not seek confident closure......Through cacophonic story-telling, emerging from ethnographic observations from academic scenes in Australia and elsewhere, the article seeks to explore the timeliness and untimeliness of feminist knowledge production. Rather than arguing a particular point or making a claim for a particular...

  7. Collateral Damage and Critical Turning Points: Public Health Implications of HPV Vaccine News Coverage for Boys and Men in 2011.

    Science.gov (United States)

    Krakow, Melinda; Rogers, Brian

    2016-09-01

    In 2009, the Food and Drug Administration (FDA) officially expanded approval of the Gardasil vaccine to include human papillomavirus (HPV) vaccination for boys and men, and in 2011, the Centers for Disease Control and Prevention (CDC) issued a formal recommendation for routine vaccination for this population. Despite these efforts, HPV vaccination rates for boys and men continue to fall short of public health targets. While news was breaking about the benefits of the HPV vaccine for boys and men, public attention shifted as a result of political debates concerning the vaccine. This study examines a pivotal time period for public health in which the vaccine became officially recommended for boys and men and at the same time became the center of political controversies in the lead-up to the 2012 presidential campaign. The current study extends previous research and presents a content analysis of newspaper articles (N = 154) about the HPV vaccine for the year 2011. Results indicate that the lack of comprehensive coverage of HPV and the HPV vaccine found in previous studies continued in this year. Results shed light on key political events that may have functioned to overshadow the recommendation of the HPV vaccine for boys and men. The implications of this pattern of news coverage can inform public health efforts to address low rates of HPV vaccination uptake among boys and men in present day.

  8. Injured civilian survivors of suicide bomb attacks: from partial PTSD to recovery or to traumatisation. Where is the turning point?

    Science.gov (United States)

    Dolberg, Ornah T; Barkai, Gabriel; Leor, Agnes; Rapoport, Helena; Bloch, Miki; Schreiber, Shaul

    2010-03-01

    To assess the short- (3-9 months) and medium-term (30 months) occurrence and severity of post-traumatic stress disorder (PTSD) in civilian survivors of suicide bombing terrorist attacks. We evaluated 129 injured survivors of nine attacks in Israel who were treated in our emergency room between June 2000 and September 2002. Data on demographics, physical injuries and psychiatric symptoms were collected by both a structured clinical interview and standard assessment scales for depression, anxiety, and sleep quality. Diagnosis of PTSD was based on a Hebrew-validated DSM-IV SCID-PTSD rating scale. At the first assessment (short-term), 20 survivors (15.5%) met the criteria for full-blown PTSD and 54 (42%) for sub-clinical PTSD, while 55 (42.5%) evidenced no symptoms of PTSD. Two years later, only 54 patients could be located: 19 (35%) of them had either persistent or de novo PTSD and none had residual sub-clinical PTSD. Relatively few survivors of suicide bomb attacks had full-blown PTSD, while a substantial number of survivors had short-term sub-clinical PTSD. Two-year follow-up evaluations revealed that a significant a number of the patients available for testing (35%) had full-blown PTSD. These findings imply that medium-term follow-up of survivors is needed in order to establish the actual prevalence of PTSD.

  9. Learning turning points--in life with long-term illness--visualized with the help of the life-world philosophy.

    Science.gov (United States)

    Berglund, Mia M U

    2014-01-01

    A long-term illness is an occurrence that changes one's life and generates a need to learn how to live with it. This article is based on an empirical study of interviews on people living with different long-term illnesses. The results have shown that the learning process is a complex phenomenon interwoven with life as a whole. The essential meaning of learning to live with long-term illness concerns a movement toward a change of understanding of access to the world. In this movement, in which everyday lives as well as relationships with oneself and others are affected, a continual renegotiation is needed. Texts from existential/lifeworld philosopher, Heidegger and Gadamer, have been used to get a greater understanding of the empirical results. These texts have been analysed with particular focus on learning turning points and the importance of reflection. The results are highlighted under the following themes: Pursuit of balance-the aim of learning, The tense grip-the resistance to learning, To live more really-the possibilities of the learning, Distancing-the how of the learning, and The tense of the learning-the whole of the learning. In those learning turning points are present. Knowledge from this study has been used to make a didactic model designed to give caregivers a tool to support patients' learning. The didactic model is called: The challenge to take charge of life with a long-term illness.

  10. Long-period gratings in photonic crystal fibers operating near the phase-matching turning point for evanescent chemical and biochemical sensing

    Science.gov (United States)

    Kanka, Jiri

    2012-06-01

    Fiber-optic long-period grating (LPG) operating near the dispersion turning point in its phase matching curve (PMC), referred to as a Turn Around Point (TAP) LPG, is known to be extremely sensitive to external parameters. Moreover, in a TAP LPG the phase matching condition can be almost satisfied over large spectral range, yielding a broadband LPG operation. TAP LPGs have been investigated, namely for use as broadband mode convertors and biosensors. So far TAP LPGs have been realized in specially designed or post-processed conventional fibers, not yet in PCFs, which allow a great degree of freedom in engineering the fiber's dispersion properties through the control of the PCF structural parameters. We have developed the design optimization technique for TAP PCF LPGs employing the finite element method for PCF modal analysis in a combination with the Nelder-Mead simplex method for minimizing the objective function based on target-specific PCF properties. Using this tool we have designed TAP PCF LPGs for specified wavelength ranges and refractive indices of medium in the air holes. Possible TAP PCF-LPG operational regimes - dual-resonance, broadband mode conversion and transmitted intensity-based operation - will be demonstrated numerically. Potential and limitations of TAP PCF-LPGs for evanescent chemical and biochemical sensing will be assessed.

  11. Is This The Turning Point?

    African Journals Online (AJOL)

    denise

    social sciences and, equally important, the seemingly ever-changing methodological scenarios ... qualitative research approaches per se in ... The latest book on qualitative research methods ... Qualitative and Quantitative Paradigms Shape.

  12. Keys to Successful Diabetes Self-Management for Uninsured Patients: Social Support, Observational Learning, and Turning Points A Safety Net Providers’ Strategic Alliance Study

    Science.gov (United States)

    Hanahan, Melissa A.; Werner, James J.; Tomsik, Phillip; Weirich, Stephen A.; Reichsman, Ann; Navracruz, Lisa; Clemons-Clark, Terri; Cella, Peggi; Terchek, Joshua; Munson, Michelle R.

    2015-01-01

    Objective To determine how medically uninsured patients with limited material resources successfully manage diabetes. Methods Clinicians at 5 safety net practices enrolled uninsured adult patients (N=26) with prior diagnosis of diabetes for 6 months or longer. Patients were interviewed about enabling factors, motivations, resources, and barriers. Chart reviews and clinician surveys supplemented interview data. Interview, survey, and chart review data were analyzed and findings were summarized. Results Two distinct groups of patients were investigated: 1) “successful,” defined as those with an HbA1c of ≤7% or a recent improvement of at least 2% (n=17); and 2) “unsuccessful,” defined as patients with HbA1c of ≥9% (n=9) without recent improvement. In comparison to unsuccessful patients, successful patients more often reported having friends or family with diabetes, sought information about the disease, used evidence-based self-management strategies, held an accurate perception of their own disease control, and experienced “turning point” events that motivated increased efforts in disease management. Conclusions Uninsured safety net patients who successfully managed diabetes learned from friends and family with diabetes and leveraged disease-related events into motivational turning points. It may be beneficial for clinicians to incorporate social learning and motivational enhancement into diabetes interventions to increase patients’ motivation for improved levels of self-management. PMID:21671529

  13. Feed rate affecting surface roughness and tool wear in dry hard turning of AISI 4140 steel automotive parts using TiN+AlCrN coated inserts

    Science.gov (United States)

    Paengchit, Phacharadit; Saikaew, Charnnarong

    2018-02-01

    This work aims to investigate the effects of feed rate on surface roughness (Ra) and tool wear (VB) and to obtain the optimal operating condition of the feed rate in dry hard turning of AISI 4140 chromium molybdenum steel for automotive industry applications using TiN+AlCrN coated inserts. AISI 4140 steel bars were employed in order to carry out the dry hard turning experiments by varying the feed rates of 0.06, 0.08 and 0.1 mm/rev based on experimental design technique that can be analyzed by analysis of variance (ANOVA). In addition, the cutting tool inserts were examined after machining experiments by SEM to evaluate the effect of turning operations on tool wear. The results showed that averages Ra and VB were significantly affected by the feed rate at the level of significance of 0.05. Averages Ra and VB values at the feed rate of 0.06 mm/rev were lowest compared to average values at the feed rates of 0.08 and 0.1 mm/rev, based on the main effect plot.

  14. Turning breech babies after 34 weeks: the if, how, & when of turning breech babies.

    Science.gov (United States)

    Cohain, Judy Slome

    2007-01-01

    Techniques for turning a term breech baby are 1). External cephalic version (ECV) using hands and ultrasound only; 2). Acupuncture point stimulation, by needle or moxibustion; 3). Chiropractic "Webster" technique; 4). Hypnotherapy; and 5). Special exercises. Fifty % of breech fetuses at 34 weeks will turn by themselves to head down by 38 weeks. Therefore, to be considered effective, a technique for turning breech must turn the baby and keep it turned more than 50% of the time. Only ECV with an experienced practitioner has been documented to have a greater than 50% success rate at 37 weeks; in 95% of cases the head stays down. Most women experience the fetus turning by hand as quick but very painful. "Unstable lie" is sometimes used as a baseless excuse for inducing labor after the baby turns from breech to head down. (judyslome@hotmail.com).

  15. New England observed and predicted August stream/river temperature maximum daily rate of change points

    Data.gov (United States)

    U.S. Environmental Protection Agency — The shapefile contains points with associated observed and predicted August stream/river temperature maximum negative rate of change in New England based on a...

  16. Effects of F/G-actin ratio and actin turn-over rate on NADPH oxidase activity in microglia

    DEFF Research Database (Denmark)

    Rasmussen, Izabela; Pedersen, Line Hjortshøj; Byg, Luise

    2010-01-01

    Most in vivo studies that have addressed the role of actin dynamics in NADPH oxidase function in phagocytes have used toxins to modulate the polymerization state of actin and mostly effects on actin has been evaluated by end point measurements of filamentous actin, which says little about actin d...... dynamics, and without consideration for the subcellular distribution of the perturbed actin cytoskeleton....

  17. Predicting protein folding rate change upon point mutation using residue-level coevolutionary information.

    Science.gov (United States)

    Mallik, Saurav; Das, Smita; Kundu, Sudip

    2016-01-01

    Change in folding kinetics of globular proteins upon point mutation is crucial to a wide spectrum of biological research, such as protein misfolding, toxicity, and aggregations. Here we seek to address whether residue-level coevolutionary information of globular proteins can be informative to folding rate changes upon point mutations. Generating residue-level coevolutionary networks of globular proteins, we analyze three parameters: relative coevolution order (rCEO), network density (ND), and characteristic path length (CPL). A point mutation is considered to be equivalent to a node deletion of this network and respective percentage changes in rCEO, ND, CPL are found linearly correlated (0.84, 0.73, and -0.61, respectively) with experimental folding rate changes. The three parameters predict the folding rate change upon a point mutation with 0.031, 0.045, and 0.059 standard errors, respectively. © 2015 Wiley Periodicals, Inc.

  18. Europe-wide fertility trends since the 1990s: Turning the corner from declining first birth rates

    Directory of Open Access Journals (Sweden)

    Marion Burkimsher

    2015-03-01

    Full Text Available Background: In the period 1995-2002 there was a change in trajectory from decline to rise in first birth fertility rates across Europe. Objective: A number of previous studies have looked at the demographic causes of the transition. This study evaluates their conclusions by analysing a comprehensive set of indicators for fifteen countries with data in the Human Fertility Database. Methods: Comparisons are made between the four years before and after the fertility trough, to discover what changed between these two periods. Results: In the period before the trough, peak age-specific fertility rates were falling; these tended to stabilise after the year of minimum fertility. The width of the fertility curve, however, was already widening in the 1990s, and this trend continued. The transition from fall to rise in TFR1 occurred when the increase in the width of the curve more than compensated for any further falls in peak rates; this explanation is valid for countries in both Eastern and Western Europe. The increasing width of the fertility curve was caused by two factors: the decline in young (pre-modal fertility slowed, whilst the rise in older (post-modal fertility accelerated. For some countries, a rise in underlying cohort rates also contributed to the rise in period rates. The likelihood of childless women entering motherhood also rose in some but not all countries. Conclusions: During the 1990s, women were postponing first births across Europe. A rebound took place for several reasons, with the overarching driver being the strong rise in late fertility. Comments: In some countries the steep rise in late fertility had an unexpected and paradoxical effect on postponement rates (defined as the year-on-year increase in mean age at first birth. Recuperation at post-modal ages of postponed first births caused an acceleration in 'postponement' rates, as defined by this metric.

  19. On changing points of mean residual life and failure rate function for some generalized Weibull distributions

    International Nuclear Information System (INIS)

    Xie, M.; Goh, T.N.; Tang, Y.

    2004-01-01

    The failure rate function and mean residual life function are two important characteristics in reliability analysis. Although many papers have studied distributions with bathtub-shaped failure rate and their properties, few have focused on the underlying associations between the mean residual life and failure rate function of these distributions, especially with respect to their changing points. It is known that the change point for mean residual life can be much earlier than that of failure rate function. In fact, the failure rate function should be flat for a long period of time for a distribution to be useful in practice. When the difference between the change points is large, the flat portion tends to be longer. This paper investigates the change points and focuses on the difference of the changing points. The exponentiated Weibull, a modified Weibull, and an extended Weibull distribution, all with bathtub-shaped failure rate function will be used. Some other issues related to the flatness of the bathtub curve are discussed

  20. Effect of feed rate, workpiece hardness and cutting edge on subsurface residual stress in the hard turning of bearing steel using chamfer + hone cutting edge geometry

    International Nuclear Information System (INIS)

    Hua Jiang; Shivpuri, Rajiv; Cheng Xiaomin; Bedekar, Vikram; Matsumoto, Yoichi; Hashimoto, Fukuo; Watkins, Thomas R.

    2005-01-01

    Residual stress on the machined surface and the subsurface is known to influence the service quality of a component, such as fatigue life, tribological properties, and distortion. Therefore, it is essential to predict and control it for enhanced performance. In this paper, a newly proposed hardness based flow stress model is incorporated into an elastic-viscoplastic finite element model of hard turning to analyze process variables that affect the residual stress profile of the machined surface. The effects of cutting edge geometry and workpiece hardness as well as cutting conditions, such as feed rate and cutting speed, are investigated. Numerical analysis shows that hone edge plus chamfer cutting edge and aggressive feed rate help to increase both compressive residual stress and penetration depth. These predictions are validated by face turning experiments which were conducted using a chamfer with hone cutting edge for different material hardness and cutting parameters. The residual stresses under the machined surface are measured by X-ray diffraction/electropolishing method. A maximum circumferential residual stress of about 1700 MPa at a depth of 40 μm is reached for hardness of 62 HRc and feed rate of 0.56 mm/rev. This represents a significant increase from previously reported results in literatures. It is found from this analysis that using medium hone radius (0.02-0.05 mm) plus chamfer is good for keeping tool temperature and cutting force low, while obtaining desired residual stress profile

  1. Point process analyses of variations in smoking rate by setting, mood, gender, and dependence

    Science.gov (United States)

    Shiffman, Saul; Rathbun, Stephen L.

    2010-01-01

    The immediate emotional and situational antecedents of ad libitum smoking are still not well understood. We re-analyzed data from Ecological Momentary Assessment using novel point-process analyses, to assess how craving, mood, and social setting influence smoking rate, as well as assessing the moderating effects of gender and nicotine dependence. 304 smokers recorded craving, mood, and social setting using electronic diaries when smoking and at random nonsmoking times over 16 days of smoking. Point-process analysis, which makes use of the known random sampling scheme for momentary variables, examined main effects of setting and interactions with gender and dependence. Increased craving was associated with higher rates of smoking, particularly among women. Negative affect was not associated with smoking rate, even in interaction with arousal, but restlessness was associated with substantially higher smoking rates. Women's smoking tended to be less affected by negative affect. Nicotine dependence had little moderating effect on situational influences. Smoking rates were higher when smokers were alone or with others smoking, and smoking restrictions reduced smoking rates. However, the presence of others smoking undermined the effects of restrictions. The more sensitive point-process analyses confirmed earlier findings, including the surprising conclusion that negative affect by itself was not related to smoking rates. Contrary to hypothesis, men's and not women's smoking was influenced by negative affect. Both smoking restrictions and the presence of others who are not smoking suppress smoking, but others’ smoking undermines the effects of restrictions. Point-process analyses of EMA data can bring out even small influences on smoking rate. PMID:21480683

  2. Approximate entropy and point correlation dimension of heart rate variability in healthy subjects

    DEFF Research Database (Denmark)

    Storella, R J; Wood, H W; Mills, K M

    1999-01-01

    The contribution of nonlinear dynamics to heart rate variability in healthy humans was examined using surrogate data analysis. Several measures of heart rate variability were used and compared. Heart rates were recorded for three hours and original data sets of 8192 R-R intervals created. For each...... original data set (n = 34), three surrogate data sets were made by shuffling the order of the R-R intervals while retaining their linear correlations. The difference in heart rate variability between the original and surrogate data sets reflects the amount of nonlinear structure in the original data set....... Heart rate variability was analyzed by two different nonlinear methods, point correlation dimension and approximate entropy. Nonlinearity, though under 10 percent, could be detected with both types of heart rate variability measures. More importantly, not only were the correlations between...

  3. Turn key contracts

    International Nuclear Information System (INIS)

    Feretic, D.

    1975-01-01

    The aim of this summary is to point out some specific areas which have to be covered in a turn-key contract and which are of primarily interest to the buyer of a nuclear plant. It will be assumed that the buyer is utility company in a developing country and a plant supplier a company in an industrial country. (orig./FW) [de

  4. Nuclear structure and weak rates of heavy waiting point nuclei under rp-process conditions

    Science.gov (United States)

    Nabi, Jameel-Un; Böyükata, Mahmut

    2017-01-01

    The structure and the weak interaction mediated rates of the heavy waiting point (WP) nuclei 80Zr, 84Mo, 88Ru, 92Pd and 96Cd along N = Z line were studied within the interacting boson model-1 (IBM-1) and the proton-neutron quasi-particle random phase approximation (pn-QRPA). The energy levels of the N = Z WP nuclei were calculated by fitting the essential parameters of IBM-1 Hamiltonian and their geometric shapes were predicted by plotting potential energy surfaces (PESs). Half-lives, continuum electron capture rates, positron decay rates, electron capture cross sections of WP nuclei, energy rates of β-delayed protons and their emission probabilities were later calculated using the pn-QRPA. The calculated Gamow-Teller strength distributions were compared with previous calculation. We present positron decay and continuum electron capture rates on these WP nuclei under rp-process conditions using the same model. For the rp-process conditions, the calculated total weak rates are twice the Skyrme HF+BCS+QRPA rates for 80Zr. For remaining nuclei the two calculations compare well. The electron capture rates are significant and compete well with the corresponding positron decay rates under rp-process conditions. The finding of the present study supports that electron capture rates form an integral part of the weak rates under rp-process conditions and has an important role for the nuclear model calculations.

  5. Weak interaction rates for Kr and Sr waiting-point nuclei under rp-process conditions

    International Nuclear Information System (INIS)

    Sarriguren, P.

    2009-01-01

    Weak interaction rates are studied in neutron deficient Kr and Sr waiting-point isotopes in ranges of densities and temperatures relevant for the rp process. The nuclear structure is described within a microscopic model (deformed QRPA) that reproduces not only the half-lives but also the Gamow-Teller strength distributions recently measured. The various sensitivities of the decay rates to both density and temperature are discussed. Continuum electron capture is shown to contribute significantly to the weak rates at rp-process conditions.

  6. Effect of deposition rate on melting point of copper film catalyst substrate at atomic scale

    Science.gov (United States)

    Marimpul, Rinaldo; Syuhada, Ibnu; Rosikhin, Ahmad; Winata, Toto

    2018-03-01

    Annealing process of copper film catalyst substrate was studied by molcular dynamics simulation. This copper film catalyst substrate was produced using thermal evaporation method. The annealing process was limited in nanosecond order to observe the mechanism at atomic scale. We found that deposition rate parameter affected the melting point of catalyst substrate. The change of crystalline structure of copper atoms was observed before it had been already at melting point. The optimum annealing temperature was obtained to get the highest percentage of fcc structure on copper film catalyst substrate.

  7. Role & Impact of Interest Rate in Jordan’ Economy from Points of View of Banking Managers

    Directory of Open Access Journals (Sweden)

    REEM SAHER alaraj

    2017-05-01

    Full Text Available The research aimed at investigating the role, impact and determinants of interest rate in Jordanian economy from view points of banking managers in Jordan. The methodology is descriptive and analytical using mean, standard deviation, t-test and percentages as statistical tools. The study concluded that the role of interest rate in Jordanian monetary policy is restricted by two factors: pegging JD with US$ which limits the effective role of interest rate in Jordanian monetary policy and the dual banking system of traditional and Islamic banks where Islamic banks do not deal with Interest rate. Raising interest rate in Jordan caused higher cost of credit for companies, less competitiveness of exports, less liquidity in the economy, higher profit margin for banks, higher exchange rate of JD and higher inflation. Nevertheless, lowering interest rate in Jordan caused lower cost of borrowing, higher liquidity, better competitiveness of exports and more credit facilities by banks but inflation was much lower. Moreover, the study concluded the determinants of interest rate in Jordan are money supply, demand for money, inflation and economic conditions. In order to have an effective role for interest rate in monetary policy, the researcher recommends pegging JD to a basket of currencies.

  8. A Matérn model of the spatial covariance structure of point rain rates

    KAUST Repository

    Sun, Ying

    2014-07-15

    It is challenging to model a precipitation field due to its intermittent and highly scale-dependent nature. Many models of point rain rates or areal rainfall observations have been proposed and studied for different time scales. Among them, the spectral model based on a stochastic dynamical equation for the instantaneous point rain rate field is attractive, since it naturally leads to a consistent space–time model. In this paper, we note that the spatial covariance structure of the spectral model is equivalent to the well-known Matérn covariance model. Using high-quality rain gauge data, we estimate the parameters of the Matérn model for different time scales and demonstrate that the Matérn model is superior to an exponential model, particularly at short time scales.

  9. A Matérn model of the spatial covariance structure of point rain rates

    KAUST Repository

    Sun, Ying; Bowman, Kenneth P.; Genton, Marc G.; Tokay, Ali

    2014-01-01

    It is challenging to model a precipitation field due to its intermittent and highly scale-dependent nature. Many models of point rain rates or areal rainfall observations have been proposed and studied for different time scales. Among them, the spectral model based on a stochastic dynamical equation for the instantaneous point rain rate field is attractive, since it naturally leads to a consistent space–time model. In this paper, we note that the spatial covariance structure of the spectral model is equivalent to the well-known Matérn covariance model. Using high-quality rain gauge data, we estimate the parameters of the Matérn model for different time scales and demonstrate that the Matérn model is superior to an exponential model, particularly at short time scales.

  10. Effect of Heart rate on Basketball Three-Point Shot Accuracy

    OpenAIRE

    Luca P. Ardigò; Goran Kuvacic; Antonio D. Iacono; Giacomo Dascanio; Johnny Padulo; Johnny Padulo

    2018-01-01

    The three-point shot (3S) is a fundamental basketball skill used frequently during a game, and is often a main determinant of the final result. The aim of the study was to investigate the effect of different metabolic conditions, in terms of heart rates, on 3S accuracy (3S%) in 24 male (Under 17) basketball players (age 16.3 ± 0.6 yrs). 3S performance was specifically investigated at different heart rates. All sessions consisted of 10 consecutive 3Ss from five different significant field spot...

  11. Effect of Heart rate on Basketball Three-Point Shot Accuracy

    Directory of Open Access Journals (Sweden)

    Luca P. Ardigò

    2018-02-01

    Full Text Available The three-point shot (3S is a fundamental basketball skill used frequently during a game, and is often a main determinant of the final result. The aim of the study was to investigate the effect of different metabolic conditions, in terms of heart rates, on 3S accuracy (3S% in 24 male (Under 17 basketball players (age 16.3 ± 0.6 yrs. 3S performance was specifically investigated at different heart rates. All sessions consisted of 10 consecutive 3Ss from five different significant field spots just beyond the FIBA three-point line, i.e., about 7 m from the basket (two counter-clockwise “laps” at different heart rates: rest (0HR, after warm-up (50%HRMAX [50HR], and heart rate corresponding to 80% of its maximum value (80%HRMAX [80HR]. We found that 50HR does not significantly decrease 3S% (−15%, P = 0.255, while 80HR significantly does when compared to 0HR (−28%, P = 0.007. Given that 50HR does not decrease 3S% compared to 0HR, we believe that no preliminary warm-up is needed before entering a game in order to specifically achieve a high 3S%. Furthermore, 3S training should be performed in conditions of moderate-to-high fatigued state so that a high 3S% can be maintained during game-play.

  12. Diamond turning of glass

    Energy Technology Data Exchange (ETDEWEB)

    Blackley, W.S.; Scattergood, R.O.

    1988-12-01

    A new research initiative will be undertaken to investigate the critical cutting depth concepts for single point diamond turning of brittle, amorphous materials. Inorganic glasses and a brittle, thermoset polymer (organic glass) are the principal candidate materials. Interrupted cutting tests similar to those done in earlier research are Ge and Si crystals will be made to obtain critical depth values as a function of machining parameters. The results will provide systematic data with which to assess machining performance on glasses and amorphous materials

  13. Migration as a turning point in food habits: the early phase of dietary acculturation among women from South Asian, African, and Middle Eastern Countries living in Norway.

    Science.gov (United States)

    Terragni, Laura; Garnweidner, Lisa M; Pettersen, Kjell Sverre; Mosdøl, Annhild

    2014-01-01

    This article explores the early phase of dietary acculturation after migration. South Asian, African and Middle Eastern women (N = 21) living in Norway were interviewed about their early experiences with food in a new context. The findings pointed to abrupt changes in food habits in the first period after migration. To various degrees, women reported unfamiliarity with foods in shops, uncertainty about meal formats and food preparation and fear of eating food prohibited by their religion. Their food consumption tended to be restricted to food items perceived as familiar or safe. Our findings indicate that the first period after migration represents a specific phase in the process of dietary acculturation. Early initiatives aimed at enhancing confidence in food and familiarity with the new food culture are recommended.

  14. Heraclitean logos and flux in T.S. Eliot’s Four Quartets: 'cosmic consciousness' and 'the still point of the turning world'

    Directory of Open Access Journals (Sweden)

    A. Wessels

    2001-08-01

    Full Text Available T.S. Eliot prefaces “Burnt Norton”, the first of his Four Quartets, with two quotations from the Greek philosopher, Heraclitus. By means of these epigrams, Eliot points us to the Heraclitean opposition and paradoxical interdependence between logos and flux as a paradigm in the poem, a paradigm that he uses for an investigation and articulation of a number of philosophical contemplations. In this paper, I discuss Eliot’s different configurations of the logos/flux paradigm in the poem, firstly to illuminate the relationship between temporality and eternity, secondly, to elaborate the relationship between God and humanity, and thirdly to express the relationship between structured art and chaotic experience. In each instance it is not only the opposition between the two elements that is important, but also the point of contact, the intersection. There is some evidence that Eliot’s depiction of this intersection as, for example, the “moment in and out of time”, is based on personal experience of a transcendent, mystical nature. His expression of this experience is also investigated by comparing it to similar experiences described by others, notably by a Canadian psychiatrist, Richard Maurice Bucke. A comparison of Bucke’s description in his evolutionist text of 1901 and Eliot’s poetic rendering reveals not only surprising similarities but also essential differences which highlights Eliot’s purely Christian interpretation in the face of Bucke’s more universalist approach. For T.S. Eliot, eternity or timelessness can only be accessed through the temporal experience of human consciousness, in fleeting moments of exaltation in daily life, in the charged, timeless configurations of art as an imitation of divine creation, and finally in Christ, who embodies the love of God and is for Eliot the ultimate transection of the temporal and eternal, the flux and the logos.

  15. Improved estimates of external gamma dose rates in the environs of Hinkley Point Power Station

    International Nuclear Information System (INIS)

    Macdonald, H.F.; Thompson, I.M.G.

    1988-07-01

    The dominant source of external gamma dose rates at centres of population within a few kilometres of Hinkley Point Power Station is the routine discharge of 41-Ar from the 'A' station magnox reactors. Earlier estimates of the 41-Ar radiation dose rates were based upon measured discharge rates, combined with calculations using standard plume dispersion and cloud-gamma integration models. This report presents improved dose estimates derived from environmental gamma dose rate measurements made at distances up to about 1 km from the site, thus minimising the degree of extrapolation introduced in estimating dose rates at locations up to a few kilometres from the site. In addition, results from associated chemical tracer measurements and wind tunnel simulations covering distances up to about 4 km from the station are outlined. These provide information on the spatial distribution of the 41-Ar plume during the initial stages of its dispersion, including effects due to plume buoyancy and momentum and behaviour under light wind conditions. In addition to supporting the methodology used for the 41-Ar dose calculations, this information is also of generic interest in the treatment of a range of operational and accidental releases from nuclear power station sites and will assist in the development and validation of existing environmental models. (author)

  16. A Globally Stable Lyapunov Pointing and Rate Controller for the Magnetospheric MultiScale Mission (MMS)

    Science.gov (United States)

    Shah, Neerav

    2011-01-01

    The Magnetospheric MultiScale Mission (MMS) is scheduled to launch in late 2014. Its primary goal is to discover the fundamental plasma physics processes of reconnection in the Earth's magnetosphere. Each of the four MMS spacecraft is spin-stabilized at a nominal rate of 3 RPM. Traditional spin-stabilized spacecraft have used a number of separate modes to control nutation, spin rate, and precession. To reduce the number of modes and simplify operations, the Delta-H control mode is designed to accomplish nutation control, spin rate control, and precession control simultaneously. A nonlinear design technique, Lyapunov's method, is used to design the Delta-H control mode. A global spin rate controller selected as the baseline controller for MMS, proved to be insufficient due to an ambiguity in the attitude. Lyapunov's design method was used to solve this ambiguity, resulting in a controller that meets the design goals. Simulation results show the advantage of the pointing and rate controller for maneuvers larger than 90 deg and provide insight into the performance of this controller.

  17. Distributed Fair Access Point Selection for Multi-Rate IEEE 802.11 WLANs

    Science.gov (United States)

    Gong, Huazhi; Nahm, Kitae; Kim, Jongwon

    In IEEE 802.11 networks, the access point (AP) selection based on the strongest signal strength often results in the extremely unfair bandwidth allocation among mobile users (MUs). In this paper, we propose a distributed AP selection algorithm to achieve a fair bandwidth allocation for MUs. The proposed algorithm gradually balances the AP loads based on max-min fairness for the available multiple bit rate choices in a distributed manner. We analyze the stability and overhead of the proposed algorithm, and show the improvement of the fairness via computer simulation.

  18. Experimental study of radiation dose rate at different strategic points of the BAEC TRIGA Research Reactor.

    Science.gov (United States)

    Ajijul Hoq, M; Malek Soner, M A; Salam, M A; Haque, M M; Khanom, Salma; Fahad, S M

    2017-12-01

    The 3MW TRIGA Mark-II Research Reactor of Bangladesh Atomic Energy Commission (BAEC) has been under operation for about thirty years since its commissioning at 1986. In accordance with the demand of fundamental nuclear research works, the reactor has to operate at different power levels by utilizing a number of experimental facilities. Regarding the enquiry for safety of reactor operating personnel and radiation workers, it is necessary to know the radiation level at different strategic points of the reactor where they are often worked. In the present study, neutron, beta and gamma radiation dose rate at different strategic points of the reactor facility with reactor power level of 2.4MW was measured to estimate the rising level of radiation due to its operational activities. From the obtained results high radiation dose is observed at the measurement position of the piercing beam port which is caused by neutron leakage and accordingly, dose rate at the stated position with different reactor power levels was measured. This study also deals with the gamma dose rate measurements at a fixed position of the reactor pool top surface for different reactor power levels under both Natural Convection Cooling Mode (NCCM) and Forced Convection Cooling Mode (FCCM). Results show that, radiation dose rate is higher for NCCM in compared with FCCM and increasing with the increase of reactor power. Thus, concerning the radiological safety issues for working personnel and the general public, the radiation dose level monitoring and the experimental analysis performed within this paper is so much effective and the result of this work can be utilized for base line data and code verification of the nuclear reactor. Copyright © 2017 Elsevier Ltd. All rights reserved.

  19. Spent Fuel Pool Dose Rate Calculations Using Point Kernel and Hybrid Deterministic-Stochastic Shielding Methods

    International Nuclear Information System (INIS)

    Matijevic, M.; Grgic, D.; Jecmenica, R.

    2016-01-01

    This paper presents comparison of the Krsko Power Plant simplified Spent Fuel Pool (SFP) dose rates using different computational shielding methodologies. The analysis was performed to estimate limiting gamma dose rates on wall mounted level instrumentation in case of significant loss of cooling water. The SFP was represented with simple homogenized cylinders (point kernel and Monte Carlo (MC)) or cuboids (MC) using uranium, iron, water, and dry-air as bulk region materials. The pool is divided on the old and new section where the old one has three additional subsections representing fuel assemblies (FAs) with different burnup/cooling time (60 days, 1 year and 5 years). The new section represents the FAs with the cooling time of 10 years. The time dependent fuel assembly isotopic composition was calculated using ORIGEN2 code applied to the depletion of one of the fuel assemblies present in the pool (AC-29). The source used in Microshield calculation is based on imported isotopic activities. The time dependent photon spectra with total source intensity from Microshield multigroup point kernel calculations was then prepared for two hybrid deterministic-stochastic sequences. One is based on SCALE/MAVRIC (Monaco and Denovo) methodology and another uses Monte Carlo code MCNP6.1.1b and ADVANTG3.0.1. code. Even though this model is a fairly simple one, the layers of shielding materials are thick enough to pose a significant shielding problem for MC method without the use of effective variance reduction (VR) technique. For that purpose the ADVANTG code was used to generate VR parameters (SB cards in SDEF and WWINP file) for MCNP fixed-source calculation using continuous energy transport. ADVATNG employs a deterministic forward-adjoint transport solver Denovo which implements CADIS/FW-CADIS methodology. Denovo implements a structured, Cartesian-grid SN solver based on the Koch-Baker-Alcouffe parallel transport sweep algorithm across x-y domain blocks. This was first

  20. Transitioning from antenatal surveillance surveys to routine HIV testing: a turning point in the mother-to-child transmission prevention programme for HIV surveillance in Brazil.

    Science.gov (United States)

    Pereira, Gerson Fernando Mendes; Sabidó, Meritxell; Caruso, Alessandro; Benzaken, Adele Schwartz

    2017-07-05

    In Brazil, due to the rapid increase in programmes for the prevention of mother-to-child transmission (PMTCT), routine programme data are widely available. The objective of this study was to assess the utility of programmatic data to replace HIV surveillance based on the antenatal care (ANC) surveillance survey (SS). We analysed ANC SS data from 219 maternity service clinics. PMTCT variables were extracted from the ANC SS data collection form, which allowed us to capture and compare the ANC SS data and PMTCT HIV test results for each pregnant woman who completed the ANC SS. Both the PMTCT programme and the ANC SS tested for HIV using sequential ELISA and western blot for confirmation. We assessed the completeness (% missing) of the PMTC data included in the ANC SS. Of the 36,713 pregnant women who had ANC SS HIV tests performed, 30,588 also underwent PMTCT HIV testing. The HIV prevalence rate from routine PMTCT testing was 0.36%, compared to 0.38% from the ANC SS testing (relative difference -0.05%; absolute difference -0.02%). The relative difference in prevalence rates between pregnant women in northern Brazil and pregnant women central-west Brazil was -0.98 and 0.66, respectively. Of the 29,856 women who had HIV test results from both the PMTCT and ANC SS, the positive percent agreement of the PMTCT versus the surveillance test was 84.1% (95% confidence interval [CI]: 74.8-91.0), and the negative percent agreement was 99.9% (95% CI: 99.9-100.0). The PMTCT HIV testing uptake was 86.4%. The ANC SS HIV prevalence was 0.33% among PMTCT non-refusers and 0.59% among refusers, with a percent bias of -10.80% and a differential prevalence ratio of 0.56. Syphilis and HIV testing results were complete in 98% and 97.6% of PMTCT reports, respectively. The reported HIV status for the women at clinic entry was missing. Although there were consistent HIV prevalence estimates from the PMTCT data and the ANC SS, the overall positive percent agreement of 84.1% falls below the

  1. Return rates from intertidal foraging from Blombos Cave to Pinnacle Point: Understanding early human economies.

    Science.gov (United States)

    De Vynck, Jan C; Anderson, Robert; Atwater, Chloe; Cowling, Richard M; Fisher, Erich C; Marean, Curtis W; Walker, Robert S; Hill, Kim

    2016-03-01

    The south coast of South Africa provides the earliest evidence for Middle Stone Age (MSA) coastal resource exploitation by early Homo sapiens. In coastal archaeology worldwide, there has been a debate over the general productivity of intertidal foraging, leading to studies that directly measure productivity in some regions, but there have been no such studies in South Africa. Here we present energetic return rate estimates for intertidal foraging along the southern coast of South Africa from Blombos Cave to Pinnacle Point. Foraging experiments were conducted with Khoi-San descendants of the region, and hourly caloric return rates for experienced foragers were measured on 41 days near low tide and through three seasons over two study years. On-site return rates varied as a function of sex, tidal level, marine habitat type and weather conditions. The overall energetic return rate from the entire sample (1492 kcal h(-1)) equals or exceeds intertidal returns reported from other hunter-gatherer studies, as well as measured return rates for activities as diverse as hunting mammals and plant collecting. Returns are projected to be exceptionally high (∼ 3400 kcal h(-1) for men, ∼ 1900 kcal h(-1) for women) under the best combination of conditions. However, because of the monthly tidal cycle, high return foraging is only possible for about 10 days per month and for only 2-3 h on those days. These experiments suggest that while intertidal resources are attractive, women and children could not have subsisted independently, nor met all their protein-lipid needs from marine resources alone, and would have required substantial additional energy and nutrients from plant gathering and/or from males contributing game. Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Use of dew-point detection for quantitative measurement of sweating rate

    Science.gov (United States)

    Brengelmann, G. L.; Mckeag, M.; Rowell, L. B.

    1975-01-01

    A method of measuring sweat rate (SR) based on detection of dew point (DP) is proposed which has advantages that may be attractive to other laboratories concerned with recording SR from selected areas of skin. It is similar to other methods in that dry gas is passed through a capsule which isolates several square centimeters of skin surface. The difference is in the means of determining how much gaseous water is carried off in the effluent moist gas. The DP detector used is free of the drawbacks of previous devices. DP is obtained through the fundamental technique of determining the temperature at which condensate forms on a mirror. Variations in DP are tracked rapidly, and accurately (+ or - 0.8 C nominal, sensitivity + or - 0.05 C) over a wide range ( -40 C to +50 C) without measurable hysteresis. The detector asembly is rugged and readily opened for cleaning and inspection.

  3. Uncertainty in population growth rates: determining confidence intervals from point estimates of parameters.

    Directory of Open Access Journals (Sweden)

    Eleanor S Devenish Nelson

    Full Text Available BACKGROUND: Demographic models are widely used in conservation and management, and their parameterisation often relies on data collected for other purposes. When underlying data lack clear indications of associated uncertainty, modellers often fail to account for that uncertainty in model outputs, such as estimates of population growth. METHODOLOGY/PRINCIPAL FINDINGS: We applied a likelihood approach to infer uncertainty retrospectively from point estimates of vital rates. Combining this with resampling techniques and projection modelling, we show that confidence intervals for population growth estimates are easy to derive. We used similar techniques to examine the effects of sample size on uncertainty. Our approach is illustrated using data on the red fox, Vulpes vulpes, a predator of ecological and cultural importance, and the most widespread extant terrestrial mammal. We show that uncertainty surrounding estimated population growth rates can be high, even for relatively well-studied populations. Halving that uncertainty typically requires a quadrupling of sampling effort. CONCLUSIONS/SIGNIFICANCE: Our results compel caution when comparing demographic trends between populations without accounting for uncertainty. Our methods will be widely applicable to demographic studies of many species.

  4. At a long-awaited turning point

    Science.gov (United States)

    Ghosh, Arindam; Krishnan, Yamuna

    2014-07-01

    Research in nanotechnology in India is on an upswing given the substantial investments in the past two decades. Making an impact globally will now require investing in education, entrepreneurship, translational science, infrastructure for manufacturing, and changing the administrative mindset.

  5. Training Needs Identification: A Turning Point.

    Science.gov (United States)

    Thomas, Edwin A.

    1982-01-01

    Describes a systematic approach to training needs identification that is directly tied to changing organizational events and performance requirements. The discussion includes nine questions which address performance expectations. (JJD)

  6. Cooling power technology at a turning point

    International Nuclear Information System (INIS)

    Hese, L.H.

    1978-01-01

    From freshwater cooling and efflux condenser cooling to wet recirculation cooling, hybrid and dry cooling towers, cooling tower technology has seen a development characterized by higher cooling tower costs and reduced power plant efficiency. Therefore, all research work done at the moment concentrates on making up for the economic losses connected with improved environmental protection. (orig.) [de

  7. Nuclear energy at the turning point

    Energy Technology Data Exchange (ETDEWEB)

    Weinberg, A.M.

    1977-07-01

    In deciding the future course of nuclear energy, it is necessary to re-examine man's long-term energy options, in particular solar energy and the breeder reactor. Both systems pose difficultiies: energy from the sun is likely to be expensive as well as limited, whereas a massive world-wide deployment of nuclear breeders will create problems of safety and of proliferation. Nuclear energy's long-term success depends on resolving both of these problems. Collocation of nuclear facilities with a system of resident inspectors are measures that ought to help increase the proliferation-resistance as well as the safety of a large-scale, long-term nuclear system based on breeders. In such a long-term system a strengthened International Atomic Energy Agency (IAEA) is viewed as playing a central role.

  8. The third turning point: Community college movement

    Directory of Open Access Journals (Sweden)

    Filipović Mirko

    2012-01-01

    Full Text Available Traditional American higher education system, that once was adequate for education of social elite, had to adapt, after the Second World War, to the new wave of students who would occupy middle level and relatively powerless jobs in growing corporate economy and public sector. The Community College Movement was an adequate response to the need for legitimating the new social stratification through school credentials, to the demands of minorities and lower classes youth for ever widening access to higher education, and to the demand for professionalization of some occupational groups aspiring to achieve higher social status. Through class based channeling and educational inflation, higher educational system contributes, in its own way, to preserve the existing patterns of social inequalities.

  9. German Defense Policy At A Turning Point

    Science.gov (United States)

    2014-04-01

    In discussing “the question of Germany’s normalizing ambitions”, Chaya Arora (2006) describes three important developments that have “added to...22). Which War to Mention?; Germany’s Russia Policy. The Economist, p. 25. Arora, Chaya . (2006). Germany’s Civilian Power Diplomacy: NATO...Dieter Dettke, Germany Says “No”, 73. 22 Ibid., 72. 23 Adrian Hyde-Price, Germany & European Order, 123. 24 Ibid., 123. 25 Ibid., 123. 26 Chaya

  10. Determination of disintegration rates of a 60Co point source and volume sources by the sum-peak method

    International Nuclear Information System (INIS)

    Kawano, Takao; Ebihara, Hiroshi

    1990-01-01

    The disintegration rates of 60 Co as a point source (<2 mm in diameter on a thin plastic disc) and volume sources (10-100 mL solutions in a polyethylene bottle) are determined by the sum-peak method. The sum-peak formula gives the exact disintegration rate for the point source at different positions from the detector. However, increasing the volume of the solution results in enlarged deviations from the true disintegration rate. Extended sources must be treated as an amalgam of many point sources. (author)

  11. Methodological aspects of crossover and maximum fat-oxidation rate point determination.

    Science.gov (United States)

    Michallet, A-S; Tonini, J; Regnier, J; Guinot, M; Favre-Juvin, A; Bricout, V; Halimi, S; Wuyam, B; Flore, P

    2008-11-01

    Indirect calorimetry during exercise provides two metabolic indices of substrate oxidation balance: the crossover point (COP) and maximum fat oxidation rate (LIPOXmax). We aimed to study the effects of the analytical device, protocol type and ventilatory response on variability of these indices, and the relationship with lactate and ventilation thresholds. After maximum exercise testing, 14 relatively fit subjects (aged 32+/-10 years; nine men, five women) performed three submaximum graded tests: one was based on a theoretical maximum power (tMAP) reference; and two were based on the true maximum aerobic power (MAP). Gas exchange was measured concomitantly using a Douglas bag (D) and an ergospirometer (E). All metabolic indices were interpretable only when obtained by the D reference method and MAP protocol. Bland and Altman analysis showed overestimation of both indices with E versus D. Despite no mean differences between COP and LIPOXmax whether tMAP or MAP was used, the individual data clearly showed disagreement between the two protocols. Ventilation explained 10-16% of the metabolic index variations. COP was correlated with ventilation (r=0.96, P<0.01) and the rate of increase in blood lactate (r=0.79, P<0.01), and LIPOXmax correlated with the ventilation threshold (r=0.95, P<0.01). This study shows that, in fit healthy subjects, the analytical device, reference used to build the protocol and ventilation responses affect metabolic indices. In this population, and particularly to obtain interpretable metabolic indices, we recommend a protocol based on the true MAP or one adapted to include the transition from fat to carbohydrate. The correlation between metabolic indices and lactate/ventilation thresholds suggests that shorter, classical maximum progressive exercise testing may be an alternative means of estimating these indices in relatively fit subjects. However, this needs to be confirmed in patients who have metabolic defects.

  12. New England observed and predicted August stream/river temperature maximum positive daily rate of change points

    Data.gov (United States)

    U.S. Environmental Protection Agency — The shapefile contains points with associated observed and predicted August stream/river temperature maximum positive daily rate of change in New England based on a...

  13. New England observed and predicted July stream/river temperature maximum positive daily rate of change points

    Data.gov (United States)

    U.S. Environmental Protection Agency — The shapefile contains points with associated observed and predicted July stream/river temperature maximum positive daily rate of change in New England based on a...

  14. New England observed and predicted July maximum negative stream/river temperature daily rate of change points

    Data.gov (United States)

    U.S. Environmental Protection Agency — The shapefile contains points with associated observed and predicted July stream/river temperature maximum negative daily rate of change in New England based on a...

  15. Evaluating acute pain intensity relief: challenges when using an 11-point numerical rating scale.

    Science.gov (United States)

    Chauny, Jean-Marc; Paquet, Jean; Lavigne, Gilles; Marquis, Martin; Daoust, Raoul

    2016-02-01

    Percentage of pain intensity difference (PercentPID) is a recognized way of evaluating pain relief with an 11-point numerical rating scale (NRS) but is not without flaws. A new metric, the slope of relative pain intensity difference (SlopePID), which consists in dividing PercentPID by the time between 2 pain measurements, is proposed. This study aims to validate SlopePID with 3 measures of subjective pain relief: a 5-category relief scale (not, a little, moderate, very, complete), a 2-category relief question ("I'm relieved," "I'm not relieved"), and a single-item question, "Wanting other medication to treat pain?" (Yes/No). This prospective cohort study included 361 patients in the emergency department who had an initial acute pain NRS > 3 and a pain intensity assessment within 90 minutes after analgesic administration. Mean age was 50.2 years (SD = 19.3) and 59% were women. Area under the curves of receiver operating characteristic curves analyses revealed similar discriminative power for PercentPID (0.83; 95% confidence interval [CI], 0.79-0.88) and SlopePID (0.82; 95% CI, 0.77-0.86). Considering the "very" category from the 5-category relief scale as a substantial relief, the average cutoff for substantial relief was a decrease of 64% (95% CI, 59-69) for PercentPID and of 49% per hour (95% CI, 44-54) for SlopePID. However, when a cutoff criterion of 50% was used as a measure of pain relief for an individual patient, PercentPID underestimated pain-relieved patients by 12.1% (P pain intensity at baseline was an odd number compared with an even number (32.9% vs 45.0%, respectively). SlopePID should be used instead of PercentPID as a metric to evaluate acute pain relief on a 0 to 10 NRS.

  16. Bit Error Rate Due to Misalignment of Earth Station Antenna Pointing to Satellite

    Directory of Open Access Journals (Sweden)

    Wahyu Pamungkas

    2010-04-01

    Full Text Available One problem causing reduction of energy in satellite communications system is the misalignment of earth station antenna pointing to satellite. Error in pointing would affect the quality of information signal to energy bit in earth station. In this research, error in pointing angle occurred only at receiver (Rx antenna, while the transmitter (Tx antennas precisely point to satellite. The research was conducted towards two satellites, namely TELKOM-1 and TELKOM-2. At first, measurement was made by directing Tx antenna precisely to satellite, resulting in an antenna pattern shown by spectrum analyzer. The output from spectrum analyzers is drawn with the right scale to describe swift of azimuth and elevation pointing angle towards satellite. Due to drifting from the precise pointing, it influenced the received link budget indicated by pattern antenna. This antenna pattern shows reduction of power level received as a result of pointing misalignment. As a conclusion, the increasing misalignment of pointing to satellite would affect in the reduction of received signal parameters link budget of down-link traffic.

  17. Transitioning to the New High School Graduation Rate. Policy on Point

    Science.gov (United States)

    Lenard, Matthew

    2011-01-01

    For nearly a decade, states have had flexibility in collecting and reporting graduation rate data for state and federal accountability purposes. But in 2008, the U.S. Department of Education issued new guidelines that require all states to report a new rate--the four-year adjusted cohort graduation rate--beginning in the 2011-2012 school year.…

  18. On the change points of mean residual life and failure rate functions for some generalized gamma type distributions

    Directory of Open Access Journals (Sweden)

    Parsa M.

    2014-01-01

    Full Text Available Mean residual life and failure rate functions are ubiquitously employed in reliability analysis. The term of useful period of lifetime distributions of bathtub-shaped failure rate functions is referred to the flat rigion of this function and has attracted authors and researchers in reliability, actuary, and survival analysis. In recent years, considering the change points of mean residual life and failure rate functions has been extensively utelized in determining the optimum burn-in time. In this paper we investigate the difference between the change points of failure rate and mean residual life functions of some generalized gamma type distributions due to the capability of these distributions in modeling various bathtub-shaped failure rate functions.

  19. INTRA- AND INTER-OBSERVER RELIABILITY IN SELECTION OF THE HEART RATE DEFLECTION POINT DURING INCREMENTAL EXERCISE: COMPARISON TO A COMPUTER-GENERATED DEFLECTION POINT

    Directory of Open Access Journals (Sweden)

    Bridget A. Duoos

    2002-12-01

    Full Text Available This study was designed to 1 determine the relative frequency of occurrence of a heart rate deflection point (HRDP, when compared to a linear relationship, during progressive exercise, 2 measure the reproducibility of a visual assessment of a heart rate deflection point (HRDP, both within and between observers 3 compare visual and computer-assessed deflection points. Subjects consisted of 73 competitive male cyclists with mean age of 31.4 ± 6.3 years, mean height 178.3 ± 4.8 cm. and weight 74.0 ± 4.4 kg. Tests were conducted on an electrically-braked cycle ergometer beginning at 25 watts and progressing 25 watts per minute to fatigue. Heart Rates were recorded the last 10 seconds of each stage and at fatigue. Scatter plots of heart rate versus watts were computer-generated and given to 3 observers on two different occasions. A computer program was developed to assess if data points were best represented by a single line or two lines. The HRDP represented the intersection of the two lines. Results of this study showed that 1 computer-assessed HRDP showed that 44 of 73 subjects (60.3% had scatter plots best represented by a straight line with no HRDP 2in those subjects having HRDP, all 3 observers showed significant differences(p = 0.048, p = 0.007, p = 0.001 in reproducibility of their HRDP selection. Differences in HRDP selection were significant for two of the three comparisons between observers (p = 0.002, p = 0.305, p = 0.0003 Computer-generated HRDP was significantly different than visual HRDP for 2 of 3 observers (p = 0.0016, p = 0.513, p = 0.0001. It is concluded that 1 HRDP occurs in a minority of subjects 2 significant differences exist, both within and between observers, in selection of HRDP and 3 differences in agreement between visual and computer-generated HRDP would indicate that, when HRDP exists, it should be computer-assessed

  20. 1996, a turning point in the evolution of the EDF with good financial results; 1996, une annee charniere dans l'evolution d'EDF avec de bons resultants financiers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This conference held on March 1997 presents the financial results obtained in 1996 by French Electricity Company EDF (Electricite de France). This year represented a turning point because essential landmarks were established in 1996. An european directive has been adopted in 1996 defining the framework in which european electricity market will function as well as the rules for its opening to competition. Discussions with the trade unions were conducted at the beginning of 1997and a social agreement aiming at the amelioration of services and hiring of 11,000 to 15,000 young people in the next three years. Finally, a new contract of enterprise with the state has been discussed and approved in March 5, 1997, which redefined the place and the role of EDF in the French economy, in the new stage of electricity market started by the opening to competition. The document contains the following 8 chapters: 1. Financial results and enterprise management; 2. Institutional frame and the relation with the state; 3. Development in France; 4. International development; 5. Alliances, partnerships and cooperation; 6. Management, social and human resources; 7. Environment; 8. Technical results.

  1. 1996, a turning point in the evolution of the EDF with good financial results; 1996, une annee charniere dans l'evolution d'EDF avec de bons resultants financiers

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This conference held on March 1997 presents the financial results obtained in 1996 by French Electricity Company EDF (Electricite de France). This year represented a turning point because essential landmarks were established in 1996. An european directive has been adopted in 1996 defining the framework in which european electricity market will function as well as the rules for its opening to competition. Discussions with the trade unions were conducted at the beginning of 1997and a social agreement aiming at the amelioration of services and hiring of 11,000 to 15,000 young people in the next three years. Finally, a new contract of enterprise with the state has been discussed and approved in March 5, 1997, which redefined the place and the role of EDF in the French economy, in the new stage of electricity market started by the opening to competition. The document contains the following 8 chapters: 1. Financial results and enterprise management; 2. Institutional frame and the relation with the state; 3. Development in France; 4. International development; 5. Alliances, partnerships and cooperation; 6. Management, social and human resources; 7. Environment; 8. Technical results.

  2. [Turning points in world history: urological comments on pathography of famous people: did Napoleon Bonaparte have a cystitis during the battle of Waterloo and was the battle lost because of that?].

    Science.gov (United States)

    Hatzinger, M; Stastny, M; Haferkamp, A

    2011-03-01

    Apparently unimportant diseases of some prominent figures can have a considerable effect on the course of time at turning points in world history. It is quite conceivable that the Battle of Waterloo on 18 June 1815 had been lost by France because Napoleon was not in full possession of his powers, because he was suffering from acute cystitis. Adverse weather conditions with continuous rain and coldness in advance of the battle, extremely primitive hygienic conditions and more than simple quarters for the night led to the development of cystitis. Based on the records of his biographers, his personal physician and the letters to his brother, we know that Napoleon was not able to give the command to attack in the early morning as intended, but in the early noon, only because of his bad general condition. This delay of several hours led, as we all know, to the intervention of Prussia and the devastating defeat of France. Thus it appears that a relatively unimportant urological disease influenced the course of world history crucially.

  3. The Translator's Turn: in the Cultural Turn

    Institute of Scientific and Technical Information of China (English)

    徐玮玮

    2003-01-01

    @@ Introduction: Douglas Robinson rose to the defense of the " atheoretical" American literary translator in The Translator's Turn (1991). Here, I borrowed the title from him, but I will write my paper in the thought of the translator's role in translating. In his book, Robinson argued that the literary translator embodies an integration of feeling and thought, of intuition and systematization. In analyzing the " turn" that the translator take from the source text to the target text, Robinson offered a " dialogical" model, that is the translator's dialogical engagement with the source language and with the ethic of the target language. Robinson allows for the translator to intervene, subvert, divert, even entertain, emphasizing the creative aspect of literary translation. The translation linguists, scientists, and philosophers have had their chance at translation theory; now it is time, he argued, for the literary translators to have their " turn".

  4. Point rating system as the training monitoring basis of the athletes of the national pickedwrestling team of MGSU

    Directory of Open Access Journals (Sweden)

    Barkov Aleksandr Yur'evich

    2014-02-01

    Full Text Available The article presents the point rating system for the students-athletes of the Department of Sport Development in Wrestling, which used various indicators of the wrestlers all-around training. The training is divided into a number of modules: speed qualities and endurance; speed-strength quality and flexibility; technical training; functional training; agility and coordination; theoretical training; personal characteristics, moral, strongwilled preparation and self-preparation.Each module corresponds to a certain number of points: from 0 to 20,from 0 to 15,from 0 to 10,from 0 to 5.Using the proposed point rating system evaluation for the students-athletes in wrestling, the training level of the athletes in each of the modules is determined. The range of point values, corresponding to the maximum form are 90—100 points ("excellent".Evaluation of the "good" range is 70—89 points, "satisfactory" — 50—69 points, disappointing — from 0 to 49 points.The authors offer the comparative analysis of the dynamics of high-speed performance and endurance, speed-strength qualities, functional training, agility and coordination, theoretical training and personal qualities of the academic team in wrestling during the summer and training camp of 2013.The objective information, obtained from the routine tests of physical, psychological and functional status of an athlete, the major indicators of his physical fitness, gives the opportunity to effectively manage the training process improvement of the athletes, ensures the steady increase of sportsmanship.The research results of the functional training and the physical qualities of studentsathletes during the preparatory stage of the training help to make the necessary adjustments in time and to bring the wrestlers to the top form till the main student competition.

  5. Peak capacity, peak-capacity production rate, and boiling point resolution for temperature-programmed GC with very high programming rates

    Science.gov (United States)

    Grall; Leonard; Sacks

    2000-02-01

    Recent advances in column heating technology have made possible very fast linear temperature programming for high-speed gas chromatography. A fused-silica capillary column is contained in a tubular metal jacket, which is resistively heated by a precision power supply. With very rapid column heating, the rate of peak-capacity production is significantly enhanced, but the total peak capacity and the boiling-point resolution (minimum boiling-point difference required for the separation of two nonpolar compounds on a nonpolar column) are reduced relative to more conventional heating rates used with convection-oven instruments. As temperature-programming rates increase, elution temperatures also increase with the result that retention may become insignificant prior to elution. This results in inefficient utilization of the down-stream end of the column and causes a loss in the rate of peak-capacity production. The rate of peak-capacity production is increased by the use of shorter columns and higher carrier gas velocities. With high programming rates (100-600 degrees C/min), column lengths of 6-12 m and average linear carrier gas velocities in the 100-150 cm/s range are satisfactory. In this study, the rate of peak-capacity production, the total peak capacity, and the boiling point resolution are determined for C10-C28 n-alkanes using 6-18 m long columns, 50-200 cm/s average carrier gas velocities, and 60-600 degrees C/min programming rates. It was found that with a 6-meter-long, 0.25-mm i.d. column programmed at a rate of 600 degrees C/min, a maximum peak-capacity production rate of 6.1 peaks/s was obtained. A total peak capacity of about 75 peaks was produced in a 37-s long separation spanning a boiling-point range from n-C10 (174 degrees C) to n-C28 (432 degrees C).

  6. 46 CFR 401.428 - Basic rates and charges for carrying a U.S. pilot beyond normal change point or for boarding at...

    Science.gov (United States)

    2010-10-01

    ... boarding point, the ship shall pay at the rate of $719 per day or part thereof, plus reasonable travel... normal change point or for boarding at other than the normal boarding point. 401.428 Section 401.428... carrying a U.S. pilot beyond normal change point or for boarding at other than the normal boarding point...

  7. Effect of gravity on density distributions and orthopositronium annihilation rates in ethane and methane near the critical point

    International Nuclear Information System (INIS)

    Sharma, S.C.; Kafle, S.R.S.

    1983-01-01

    The effect of gravity on density distributions has been studied in ethane and methane near their critical points using the linear-model parametric equation of state. The results obtained from this study are used to further understand the sensitivity of orthopositronium annihilation rates to density fluctuations in molecular gases. It is shown that the influence of gravity is too small to account for the recently observed dependence of orthopositronium annihilation rates on the density of ethane gas at 306.4 K. However, a significant variation in local density vs height is calculated at temperatures closer to the gas--liquid critical point. The density and temperature dependencies of the annihilation rates of orthopositronium atoms, recently observed in ethane and methane gases, are discussed in terms of the findings of this study

  8. Fixed-Point Approximations of Bandwidth-Sharing Networks with Rate Constraints

    NARCIS (Netherlands)

    M. Frolkova (Masha); J. Reed (Josh); A.P. Zwart (Bert)

    2011-01-01

    htmlabstractBandwidth-sharing networks are important flow level models of communication networks. We focus on the fact that it takes a signicant number of users to saturate a link, necessitating the inclusion of individual rate constraints. In particular we extend work of Reed & Zwart on fluid

  9. Automated calculation of point A coordinates for CT-based high-dose-rate brachytherapy of cervical cancer

    Directory of Open Access Journals (Sweden)

    Hyejoo Kang

    2017-07-01

    Full Text Available Purpose: The goal is to develop a stand-alone application, which automatically and consistently computes the coordinates of the dose calculation point recommended by the American Brachytherapy Society (i.e., point A based solely on the implanted applicator geometry for cervical cancer brachytherapy. Material and methods: The application calculates point A coordinates from the source dwell geometries in the computed tomography (CT scans, and outputs the 3D coordinates in the left and right directions. The algorithm was tested on 34 CT scans of 7 patients treated with high-dose-rate (HDR brachytherapy using tandem and ovoid applicators. A single experienced user retrospectively and manually inserted point A into each CT scan, whose coordinates were used as the “gold standard” for all comparisons. The gold standard was subtracted from the automatically calculated points, a second manual placement by the same experienced user, and the clinically used point coordinates inserted by multiple planners. Coordinate differences and corresponding variances were compared using nonparametric tests. Results: Automatically calculated, manually placed, and clinically used points agree with the gold standard to < 1 mm, 1 mm, 2 mm, respectively. When compared to the gold standard, the average and standard deviation of the 3D coordinate differences were 0.35 ± 0.14 mm from automatically calculated points, 0.38 ± 0.21 mm from the second manual placement, and 0.71 ± 0.44 mm from the clinically used point coordinates. Both the mean and standard deviations of the 3D coordinate differences were statistically significantly different from the gold standard, when point A was placed by multiple users (p < 0.05 but not when placed repeatedly by a single user or when calculated automatically. There were no statistical differences in doses, which agree to within 1-2% on average for all three groups. Conclusions: The study demonstrates that the automated algorithm

  10. The impact of exchange rate EUR/USD on the rate of return of bond investments denominated in US dollar from the point of view of euro investor

    Directory of Open Access Journals (Sweden)

    Oldřich Šoba

    2009-01-01

    Full Text Available Investment opportunities into foreign curruncies financial assets are rising because of financial markets globalization, financial markets integration and evolution of modern information technologies. The currency risk relates to these cases when investor converts cash from and into domestic currency. The currency risk is determined by unexcepeted change of exchange rate (currency of financial asset denomination / investor’s domestic currency during duration of the investment.Objective of the paper is quantification and analysis of exchange rate EUR/USD impact on the rate of return of bond investments denominated in US dollar from the point of view of a euro investor for investment horizons of different length.The analysis is realized for following investment horizons: 1 year, 2 years, 3 years, 5 years, 7 years, 10 year and 12 year. Complementary investment horizons are: month and 15 year. Bond investments denominated just US dollar are represented by investments into ING bond unit trust in period December 1989–December 2007. The unit trust invests into bonds with high rating (for example governmants bonds etc.. These bonds are denominated in USD only. Methodology of the analysis is based on quantification of proportion of exchange rate EUR/USD impact on the rate of return of bond investment denominated in USD. The share is based on basic piece of knowledge of the uncovered interest rate parity.

  11. Clinical evaluation of an automated turning bed.

    Science.gov (United States)

    Melland, H I; Langemo, D; Hanson, D; Olson, B; Hunter, S

    1999-01-01

    The purposes of this study were to assess client comfort and sleep quality, client physiologic response (skin and respiratory status), the effect on the need for caregiver assistance, and cost when using an automated turning bed. Nonexperimental, evaluative study. Twenty-four adult home or long-term care resident subjects who had a degenerative disease, spinal cord injury, stroke, cerebral palsy, or back surgery. Each subject agreed to use the automated turning bed for four weeks. Researchers completed a demographic survey and skin assessment, and assessed each subject for pressure ulcer risk and for the need of assistance of a care giver for turning before and after the four weeks of using the turning bed. Subjects rated the turning bed in terms of comfort and sleep quality. Subjects rated the turning bed as more comfortable than their own bed and expressed satisfaction at the pain relief attained when on the turning bed. While using the turning bed, there was a significant improvement in sleep quality. No skin breakdown or deterioration in respiratory status occurred. Fewer subjects required the assistance of a caregiver for turning when on the turning bed. This automated turning bed shows great promise in meeting a need for patients with limited mobility whether they are homebound or in a residential community. Future studies that further investigate use of the turning bed for postoperative back patients while still in the acute care setting are indicated. Replicative studies with a larger sample size are also indicated.

  12. Diamond turning of thermoplastic polymers

    Energy Technology Data Exchange (ETDEWEB)

    Smith, E.; Scattergood, R.O.

    1988-12-01

    Single point diamond turning studies were made using a series of thermoplastic polymers with different glass transition temperatures. Variations in surface morphology and surface roughness were observed as a function of cutting speed. Lower glass transition temperatures facilitate smoother surface cuts and better surface finish. This can be attributed to the frictional heating that occurs during machining. Because of the very low glass transition temperatures in polymeric compared to inorganic glasses, the precision machining response can be very speed sensitive.

  13. Un antes y un después: del riesgo o deterioro de la integridad cutánea a la integridad tisular Turning point: From risk or damage of skin integrity to tissue integrity

    Directory of Open Access Journals (Sweden)

    José María Carrasco Herrero

    2008-09-01

    Full Text Available Las úlceras vasculares y las úlceras de pie diabético suponen un grave problema sanitario que afecta a un gran número de pacientes y constituyen, por ello, un gran reto de trabajo para los profesionales de la salud. Los ácidos grasos hiperoxgenados (AGHO han demostrado tener eficacia gracias a su acción favorable sobre la piel, aumentando la microcirculación sanguínea, impulsando la renovación celular epidérmica y mejorando notablemente la hidratación cutánea. Hemos evaluado la eficacia del producto Mepentol® Leche, una emulsión a base de ácidos grasos hiperoxigenados, Aloe barbadensis y Mimosa tenuiflora, en el cuidado de la piel y el alivio de los síntomas, en pacientes de riesgo o con úlceras vasculares y úlceras de pie diabético. Se demuestra un antes y un después en el uso sistemático de Mepentol® Leche, evitando la sequedad cutánea, reduciendo el prurito, escozor, dolor y eczema, y devolviendo la piel a su coloración normal.Vascular ulcers and diabetic foot ulcers present a health serious problem which affects a large number of patients, creating a major challenge for health professionals. Hyperoxygenated fatty acid dressings have proven to be effective thanks to their favorable action on the skin, increasing the microcirculation of the blood, promoting the renovation of the epidermic cells, and notably increasing cutaneous hydration. We evaluate the effectiveness of Mepentol® Leche, an emulsion based on Hyper-oxygenated fatty acids, Aloe barbadensis and Mimosa tenuiflora, used to treat the skin and alleviate symptoms in patients at risk or with vascular ulcers and diabetic foot ulcers. This study showed a turning point in applying this product systematically, avoiding skin dryness and reducing itching, stinging, pain and eczema while returning normal color to the skin.

  14. Influence of Cutting Fluid Flow Rate and Cutting Parameters on the Surface Roughness and Flank Wear of TiAlN Coated Tool In Turning AISI 1015 Steel Using Taguchi Method

    Directory of Open Access Journals (Sweden)

    Moganapriya C.

    2017-09-01

    Full Text Available This paper presents the influence of cutting parameters (Depth of cut, feed rate, spindle speed and cutting fluid flow rate on the surface roughness and flank wear of physical vapor deposition (PVD Cathodic arc evaporation coated TiAlN tungsten carbide cutting tool insert during CNC turning of AISI 1015 mild steel. Analysis of Variance has been applied to determine the critical influence of cutting parameters. Taguchi orthogonal test design has been employed to optimize the process parameters affecting surface roughness and tool wear. Depth of cut was found to be the most dominant factor contributing to high surface roughness (67.5% of the inserts. However, cutting speed, feed rate and flow rate of cutting fluid showed minimal contribution to surface roughness. On the other hand, cutting speed (45.6% and flow rate of cutting fluid (23% were the dominant factors influencing tool wear. The optimum cutting conditions for desired surface roughness constitutes the following parameters such as medium cutting speed, low feed rate, low depth of cut and high cutting fluid flow rate. Minimal tool wear was achieved for the following process parameters such as low cutting speed, low feed rate, medium depth of cut and high cutting fluid flow rate.

  15. Point and interval forecasts of mortality rates and life expectancy: A comparison of ten principal component methods

    Directory of Open Access Journals (Sweden)

    Han Lin Shang

    2011-07-01

    Full Text Available Using the age- and sex-specific data of 14 developed countries, we compare the point and interval forecast accuracy and bias of ten principal component methods for forecasting mortality rates and life expectancy. The ten methods are variants and extensions of the Lee-Carter method. Based on one-step forecast errors, the weighted Hyndman-Ullah method provides the most accurate point forecasts of mortality rates and the Lee-Miller method is the least biased. For the accuracy and bias of life expectancy, the weighted Hyndman-Ullah method performs the best for female mortality and the Lee-Miller method for male mortality. While all methods underestimate variability in mortality rates, the more complex Hyndman-Ullah methods are more accurate than the simpler methods. The weighted Hyndman-Ullah method provides the most accurate interval forecasts for mortality rates, while the robust Hyndman-Ullah method provides the best interval forecast accuracy for life expectancy.

  16. Quantification of Greenhouse Gas Emission Rates from strong Point Sources by Airborne IPDA-Lidar Measurements: Methodology and Experimental Results

    Science.gov (United States)

    Ehret, G.; Amediek, A.; Wirth, M.; Fix, A.; Kiemle, C.; Quatrevalet, M.

    2016-12-01

    We report on a new method and on the first demonstration to quantify emission rates from strong greenhouse gas (GHG) point sources using airborne Integrated Path Differential Absorption (IPDA) Lidar measurements. In order to build trust in the self-reported emission rates by countries, verification against independent monitoring systems is a prerequisite to check the reported budget. A significant fraction of the total anthropogenic emission of CO2 and CH4 originates from localized strong point sources of large energy production sites or landfills. Both are not monitored with sufficiently accuracy by the current observation system. There is a debate whether airborne remote sensing could fill in the gap to infer those emission rates from budgeting or from Gaussian plume inversion approaches, whereby measurements of the GHG column abundance beneath the aircraft can be used to constrain inverse models. In contrast to passive sensors, the use of an active instrument like CHARM-F for such emission verification measurements is new. CHARM-F is a new airborne IPDA-Lidar devised for the German research aircraft HALO for the simultaneous measurement of the column-integrated dry-air mixing ratio of CO2 and CH4 commonly denoted as XCO2 und XCH4, respectively. It has successfully been tested in a serious of flights over Central Europe to assess its performance under various reflectivity conditions and in a strongly varying topography like the Alps. The analysis of a methane plume measured in crosswind direction of a coal mine ventilation shaft revealed an instantaneous emission rate of 9.9 ± 1.7 kt CH4 yr-1. We discuss the methodology of our point source estimation approach and give an outlook on the CoMet field experiment scheduled in 2017 for the measurement of anthropogenic and natural GHG emissions by a combination of active and passive remote sensing instruments on research aircraft.

  17. High rates of energy expenditure and water flux in free-ranging Point Reyes mountain beavers Aplodontia rufa phaea

    Science.gov (United States)

    Crocker, D.E.; Kofahl, N.; Fellers, G.D.; Gates, N.B.; Houser, D.S.

    2007-01-01

    We measured water flux and energy expenditure in free-ranging Point Reyes mountain beavers Aplodontia rufa phaea by using the doubly labeled water method. Previous laboratory investigations have suggested weak urinary concentrating ability, high rates of water flux, and low basal metabolic rates in this species. However, free-ranging measurements from hygric mammals are rare, and it is not known how these features interact in the environment. Rates of water flux (210 ?? 32 mL d-1) and field metabolic rates (1,488 ?? 486 kJ d-1) were 159% and 265%, respectively, of values predicted by allometric equations for similar-sized herbivores. Mountain beavers can likely meet their water needs through metabolic water production and preformed water in food and thus remain in water balance without access to free water. Arginine-vasopressin levels were strongly correlated with rates of water flux and plasma urea : creatinine ratios, suggesting an important role for this hormone in regulating urinary water loss in mountain beavers. High field metabolic rates may result from cool burrow temperatures that are well below lower critical temperatures measured in previous laboratory studies and suggest that thermoregulation costs may strongly influence field energetics and water flux in semifossorial mammals. ?? 2007 by The University of Chicago. All rights reserved.

  18. Review Essay: Turn, Turn, Turn Around—Till Categories Blur

    Directory of Open Access Journals (Sweden)

    Lars Allolio-Näcke

    2008-01-01

    Full Text Available I begin this review by introducing the book and discussing its manifest content chapter by chapter (see 2.1, focusing particularly on the author's argumentation concerning the development of new orientations in cultural studies and on how, in relation to the turns discussed, the names of the researchers and central categories involved are collected. In a second step, I give a close reading of the book's latent content, which I consider to be more important (see 2.2. In this context I discuss several questions of scientific politics—especially the issue of hegemonic claims. Thirdly, I read the book from the critical standpoint of a psychologist, a sociologist and a theologian and show the shortcomings of BACHMANN-MEDICK's outsider perspective on these disciplines. In this regard I read the book again and provide a critique of the quality of the author's scientific performance (see 3. Finally, I state the reasons I do not recommend reading this book (see 4. URN: urn:nbn:de:0114-fqs0801266

  19. THE INFLUENCE OF THE TOOL POINT ANGLE AND FEED RATE ON THE DELAMINATION AT DRILLING OF PRE-LAMINATED PARTICLEBOARD

    Directory of Open Access Journals (Sweden)

    Mihai ISPAS

    2015-12-01

    Full Text Available Pre-laminated particleboard is a wood based composite extensively used in the furniture industry. Drilling is the most common machining process which prepares the panels for joining using twist/helical drills in the absolute majority of cases. The point angle of the drill bit and the feed speed during drilling play a major role in gaining a good surface quality and minimizing the delamination tendency of the pre-laminated particleboard. The objective of this study was to measure and analyze the influence of the two above-mentioned factors on the processing quality, evaluated by de size of delaminations, both, at the entrance side and the exit side of the drill bit. To assess the defect, two parameters were used: the delamination factor and the effective area of delamination. The results showed that, in general, the combination of small point angle with low feed rate minimizes the delamination of pre-laminated particleboard panels at drilling.

  20. Turn-around improvements

    International Nuclear Information System (INIS)

    Redaelli, S.; Venturini Delsolaro, W.

    2012-01-01

    An efficient turn-around will be an important parameter for the integrated luminosity performance at LHC in 2012, when an operation with steady beam parameters and machine configuration will be achieved at the beginning of the run. Improvements of the operational cycle were already put successfully in place after the 2010 experience but additional ways to reduce the time required to setup collisions are possible. In this paper, the 2011 turn-around performance is reviewed and the benefits of the improvements from 2010 are presented. Phases of the operational cycle when further amelioration is possible are discussed and some proposal for a faster turn-around in 2012 are outlined. (authors)

  1. Impact of point A asymmetry on local control and survival for low dose-rate (LDR) brachytherapy in cervical cancer.

    Science.gov (United States)

    Opfermann, Krisha J; Wahlquist, Amy; Watkins, John; Kohler, Matthew; Jenrette, Joseph

    2012-03-01

    To evaluate whether Point A asymmetry in low dose-rate (LDR) brachytherapy is associated with local control (LC), disease-free survival (DFS) and/or overall survival (OS). A retrospective analysis of disease control and survival outcomes was conducted for patients who underwent LDR brachytherapy for advanced cervical cancer. Institutional protocol entailed concurrent chemotherapy and whole pelvis radiotherapy (WPRT) over 5 weeks, followed by placement of Fletcher-Suit tandem and colpostat applicators at weeks 6 and 8. Objective Point A doses, 80-85 Gy, were accomplished by placement of Cesium-137 (Cs-137) sources. Cox proportional hazards regression models were used to assess associations between disease control and survival endpoints with variables of interest. The records of 50 patients with FIGO stage IB1-IVA cervical cancer undergoing LDR brachytherapy at our institution were identified. Thirty of these patients had asymmetry > 2.5%, and 11 patients had asymmetry > 5%. At a median survivor follow-up of 20.25 months, 15 patients had experienced disease failure (including 5 cervical/vaginal apex only failures and 2 failures encompassing the local site). Right/left dose asymmetry at Point A was associated with statistically significantly inferior LC (p = 0.035) and inferior DFS (p = 0.011) for patients with mean Point A dose of > 80 Gy. Insufficient evidence existed to conclude an association with OS. LDR brachytherapy may be associated with clinically significant dose asymmetry. The present study demonstrates that patients with Point A asymmetry have a higher risk of failure for DFS and LC.

  2. Bit error rate analysis of free-space optical communication over general Malaga turbulence channels with pointing error

    KAUST Repository

    Alheadary, Wael Ghazy

    2016-12-24

    In this work, we present a bit error rate (BER) and achievable spectral efficiency (ASE) performance of a freespace optical (FSO) link with pointing errors based on intensity modulation/direct detection (IM/DD) and heterodyne detection over general Malaga turbulence channel. More specifically, we present exact closed-form expressions for adaptive and non-adaptive transmission. The closed form expressions are presented in terms of generalized power series of the Meijer\\'s G-function. Moreover, asymptotic closed form expressions are provided to validate our work. In addition, all the presented analytical results are illustrated using a selected set of numerical results.

  3. Change-point analysis of geophysical time-series: application to landslide displacement rate (Séchilienne rock avalanche, France)

    Science.gov (United States)

    Amorese, D.; Grasso, J.-R.; Garambois, S.; Font, M.

    2018-05-01

    The rank-sum multiple change-point method is a robust statistical procedure designed to search for the optimal number and the location of change points in an arbitrary continue or discrete sequence of values. As such, this procedure can be used to analyse time-series data. Twelve years of robust data sets for the Séchilienne (French Alps) rockslide show a continuous increase in average displacement rate from 50 to 280 mm per month, in the 2004-2014 period, followed by a strong decrease back to 50 mm per month in the 2014-2015 period. When possible kinematic phases are tentatively suggested in previous studies, its solely rely on the basis of empirical threshold values. In this paper, we analyse how the use of a statistical algorithm for change-point detection helps to better understand time phases in landslide kinematics. First, we test the efficiency of the statistical algorithm on geophysical benchmark data, these data sets (stream flows and Northern Hemisphere temperatures) being already analysed by independent statistical tools. Second, we apply the method to 12-yr daily time-series of the Séchilienne landslide, for rainfall and displacement data, from 2003 December to 2015 December, in order to quantitatively extract changes in landslide kinematics. We find two strong significant discontinuities in the weekly cumulated rainfall values: an average rainfall rate increase is resolved in 2012 April and a decrease in 2014 August. Four robust changes are highlighted in the displacement time-series (2008 May, 2009 November-December-2010 January, 2012 September and 2014 March), the 2010 one being preceded by a significant but weak rainfall rate increase (in 2009 November). Accordingly, we are able to quantitatively define five kinematic stages for the Séchilienne rock avalanche during this period. The synchronization between the rainfall and displacement rate, only resolved at the end of 2009 and beginning of 2010, corresponds to a remarkable change (fourfold

  4. Optimization of cutting parameters for machining time in turning process

    Science.gov (United States)

    Mavliutov, A. R.; Zlotnikov, E. G.

    2018-03-01

    This paper describes the most effective methods for nonlinear constraint optimization of cutting parameters in the turning process. Among them are Linearization Programming Method with Dual-Simplex algorithm, Interior Point method, and Augmented Lagrangian Genetic Algorithm (ALGA). Every each of them is tested on an actual example – the minimization of production rate in turning process. The computation was conducted in the MATLAB environment. The comparative results obtained from the application of these methods show: The optimal value of the linearized objective and the original function are the same. ALGA gives sufficiently accurate values, however, when the algorithm uses the Hybrid function with Interior Point algorithm, the resulted values have the maximal accuracy.

  5. THE INFLUENCE OF THE TOOL POINT ANGLE AND FEED RATE ON THE DYNAMIC PARAMETERS AT DRILLING COATED PARTICLEBOARD

    Directory of Open Access Journals (Sweden)

    Mihai ISPAS

    2015-12-01

    Full Text Available Pre-laminated (coated particleboards (PB are wood-based composites intensively used in the furniture industry. In order to prepare the PB for joining, drilling is the most commonly applied machining process. The surface quality and the dynamic parameters (thrust force and torque are significantly influenced by the tools characteristics and the machining parameters. The point/tip angle of the drill bit and the feed speed during drilling play a major role in gaining a good surface quality and minimizing the dynamic parameters. The objective of this study was to measure and analyze the influence of both the geometric and cinematic parameters on the dynamic parameters at drilling with twist (helical drills. The experiments were performed based on a factorial design. The results show that, a low feed rate generally minimizes both the drilling torque and the thrust force, while a small tip angle increases the drilling torque and minimizes the thrust force.

  6. Turning to alcohol?

    International Nuclear Information System (INIS)

    Reiboro, S.K.

    1998-01-01

    Brazil is examining whether turning to alcohol could solve its problems. The fuel alcohol producers are lobbying hard for the government to increase the use of alcohol to fuel the country's cars. Not only does using alcohol reduce CO 2 , runs the argument, but the Kyoto agreement might just attract international financing for the project. (author)

  7. Hydrodynamics of Turning Flocks

    OpenAIRE

    Yang, Xingbo; Marchetti, M. Cristina

    2014-01-01

    We present a hydrodynamic model of flocking that generalizes the familiar Toner-Tu equations to incorporate turning inertia of well-polarized flocks. The continuum equations controlled by only two dimensionless parameters, orientational inertia and alignment strength, are derived by coarse graining the inertial spin model recently proposed by Cavagna et al. The interplay between orientational inertia and bend elasticity of the flock yields anisotropic spin waves that mediate the propagation o...

  8. Dataset reporting the perceiver identification rates of basic emotions expressed by male, female and ambiguous gendered walkers in full-light, point-light and synthetically modelled point-light walkers.

    Science.gov (United States)

    Halovic, Shaun; Kroos, Christian

    2017-12-01

    This data set describes the experimental data collected and reported in the research article "Walking my way? Walker gender and display format confounds the perception of specific emotions" (Halovic and Kroos, in press) [1]. The data set represent perceiver identification rates for different emotions (happiness, sadness, anger, fear and neutral), as displayed by full-light, point-light and synthetic point-light walkers. The perceiver identification scores have been transformed into H t rates, which represent proportions/percentages of correct identifications above what would be expected by chance. This data set also provides H t rates separately for male, female and ambiguously gendered walkers.

  9. CONNECTION OF TURN AHEAD AND TURN BACK WITH MOTORIC ABILITIES OF THE FIFTH GRADE STUDENTS

    Directory of Open Access Journals (Sweden)

    Jovica Petković

    2006-06-01

    Full Text Available The research is done for the purpose of determination and defining of the level of connection between some motoric abilities with success in realization of programmed contents from the area of gymnastics (turn ahead and turn back. The research is done on the sample of fifty one students from the fifth grade of Elementary School, on ten motoric tests and on two specific motoric assignments – turn ahead and turn back. The results of this research clearly point that there exist the multitude of statistically important coefficients of correlation between treated motoric abilities and applied motoric assignments.

  10. Application of digital lock-in detection to Hefei Light Source turn-by-turn system

    International Nuclear Information System (INIS)

    Yang Yongliang; Wang Junhua; Sun Baogen; Chen Yuanbo; Zhou Zeran

    2010-01-01

    This paper introduces the digital lock-in detection theory and discusses its feasibility to obtain the damping rate in turn-by-turn measurement systems. Numerical simulations of this method were carried out with Matlab. Then principle presenting beam experiments were conducted on the Hefei Light Source (HLS) storage ring. The measured beta oscillation growth time is about 0.26 ms and the damping time is about 1.2 ms. Simulation and experimental results show that, the digital lock-in detection method is effective in damping rate measurement in turn-by-turn measurement systems. (authors)

  11. Uncertainty Evaluation of the New Setup for Measurement of Water-Vapor Permeation Rate by a Dew-Point Sensor

    Science.gov (United States)

    Hudoklin, D.; Šetina, J.; Drnovšek, J.

    2012-09-01

    The measurement of the water-vapor permeation rate (WVPR) through materials is very important in many industrial applications such as the development of new fabrics and construction materials, in the semiconductor industry, packaging, vacuum techniques, etc. The demand for this kind of measurement grows considerably and thus many different methods for measuring the WVPR are developed and standardized within numerous national and international standards. However, comparison of existing methods shows a low level of mutual agreement. The objective of this paper is to demonstrate the necessary uncertainty evaluation for WVPR measurements, so as to provide a basis for development of a corresponding reference measurement standard. This paper presents a specially developed measurement setup, which employs a precision dew-point sensor for WVPR measurements on specimens of different shapes. The paper also presents a physical model, which tries to account for both dynamic and quasi-static methods, the common types of WVPR measurements referred to in standards and scientific publications. An uncertainty evaluation carried out according to the ISO/IEC guide to the expression of uncertainty in measurement (GUM) shows the relative expanded ( k = 2) uncertainty to be 3.0 % for WVPR of 6.71 mg . h-1 (corresponding to permeance of 30.4 mg . m-2. day-1 . hPa-1).

  12. Turning lead into gold

    DEFF Research Database (Denmark)

    Jensen, Steffen Moltrup Ernø

    For years the field of entrepreneurship has been blinded by the alchemical promise of turning lead into gold, of finding the ones most likely to become the next Branson, Zuckerberg or Gates. The promise has been created in the midst of political and scientific agendas where certain individuals...... is not to accumulate state or market wealth, but for entrepreneurial skills to become tools towards the liberation of the individual from oppressive systems of control – essentially to add public value rather than economic value. In this presentation I will sketch an anarchist perspective on entrepreneurship, looking...

  13. Fermilab turns 50! Congratulations!

    CERN Multimedia

    Staff Association

    2017-01-01

    This year Fermilab turns 50 and the celebrations are ongoing. The ties between CERN and Fermilab are numerous and have been ranging from competition between two labs at the forefront of their field, e.g. with the chase of the top quark, finally discovered by Fermilab, to outright collaboration, e.g. on LHC low-beta quadrupole magnet development and production and in the CMS collaboration. In June, in the name of the CERN staff and scientific community, the CERN Staff Association sent a message to the Fermilab staff and scientific community, through Dr. Nigel Lockyer, Fermilab Director. The letter, and the assurance from Nigel Lockyer that the message has been passed onto the Fermilab community can be found on our website. Congratulations to Fermilab on its fiftieth Anniversary, and to the staff and collaborators who made this laboratory through their hard work, dedication and vision!

  14. Turn by Turn Measurements at the KEK-ATF

    CERN Document Server

    Renier, Y; Tomas, R; Wendt, M; Eddy, N; Kubo, K; Kuroda, S; Naito, T; Okugi, T; Terunuma, N; Urakawa, J

    2013-01-01

    The ATF damping ring has been upgraded with new read-out electronics for the beam position monitors (BPM), capable to acquire the beam orbits on a turn-by-turn basis, as well as in a high resolution averaging mode. The new BPM system allows to improve optic corrections and to achieve an even smaller vertical emittance (<2pm). Experimental results are presented based on turn-by-turn beam orbit measurements in the ring, for estimating the β functions and dispersion along the lattice. A fast method to measure spectral line amplitude in a few turns is also presented, including the evaluation of chromaticity.

  15. Use of dew-point hygrometry, direct sweat collection, and measurement of body water losses to determine sweating rates in exercising horses.

    Science.gov (United States)

    Kingston, J K; Geor, R J; McCutcheon, L J

    1997-02-01

    To compare dew-point hygrometry, direct sweat collection, and measurement of body water loss as methods for determination of sweating rate (SR) in exercising horses. 6 exercise-trained Thoroughbreds. SR was measured in 6 horses exercising at 40% of the speed that elicited maximum oxygen consumption for 45 km, with a 15-minute rest at the end of each 15-km phase. Each horse completed 2 exercise trials. Dew-point hygrometry, as a method of local SR determination, was validated in vitro by measurement of rate of evaporative water loss. During exercise, local SR was determined every 10 minutes by the following 2 methods: (1) dew-point hygrometry on the neck and lateral area of the thorax, and (2) on the basis of the volume of sweat collected from a sealed plastic pouch attached to the lateral area of the thorax. Mean whole body SR was calculated from total body water loss incurred during exercise. Evaporation rate measured by use of dew-point hygrometry was significantly correlated (r2 = 0.92) with the actual rate of evaporative water loss. There was a similar pattern of change in SR measured by dew-point hygrometry on the neck and lateral area of the thorax during exercise, with a significantly higher SR on the neck. The SR measured on the thorax by direct sweat collection and by dew-point hygrometry were of similar magnitude. Mean whole body SR calculated from total body water loss was not significantly different from mean whole body SR estimated from direct sweat collection or dew-point hygrometry measurements on the thorax. Dew-point hygrometry and direct sweat collection are useful methods for determination of local SR in horses during prolonged, steady-state exercise in moderate ambient conditions. Both methods of local SR determination provide an accurate estimated of whole body SR.

  16. Accuracy of heart rate variability estimation by photoplethysmography using an smartphone: Processing optimization and fiducial point selection.

    Science.gov (United States)

    Ferrer-Mileo, V; Guede-Fernandez, F; Fernandez-Chimeno, M; Ramos-Castro, J; Garcia-Gonzalez, M A

    2015-08-01

    This work compares several fiducial points to detect the arrival of a new pulse in a photoplethysmographic signal using the built-in camera of smartphones or a photoplethysmograph. Also, an optimization process for the signal preprocessing stage has been done. Finally we characterize the error produced when we use the best cutoff frequencies and fiducial point for smartphones and photopletysmograph and compare if the error of smartphones can be reasonably be explained by variations in pulse transit time. The results have revealed that the peak of the first derivative and the minimum of the second derivative of the pulse wave have the lowest error. Moreover, for these points, high pass filtering the signal between 0.1 to 0.8 Hz and low pass around 2.7 Hz or 3.5 Hz are the best cutoff frequencies. Finally, the error in smartphones is slightly higher than in a photoplethysmograph.

  17. Investigation of elevated case-fatality rate in poliomyelitis outbreak in Pointe Noire, Republic of Congo, 2010.

    Science.gov (United States)

    Gregory, Christopher J; Ndiaye, Serigne; Patel, Minal; Hakizamana, Elisaphan; Wannemuehler, Kathleen; Ndinga, Edouard; Chu, Susan; Talani, Pascal; Kretsinger, Katrina

    2012-11-15

    Multiple cases of paralysis, often resulting in death, occurred among young adults during a wild poliovirus (WPV) type 1 outbreak in Pointe Noire, Republic of Congo, in 2010. We conducted an investigation to identify factors associated with fatal outcomes among persons with poliomyelitis in Pointe Noire. Polio cases were defined as acute flaccid paralysis (AFP) cases reported from 7 October to 7 December 2010 with either a stool specimen positive for WPV or clinically classified as polio-compatible. Data were obtained from medical records, hospital databases, AFP case investigation forms and, when possible, via interviews with persons with polio or surrogates using a standard questionnaire. A total of 369 polio cases occurred in Pointe Noire between 7 October and 7 December 2010. Median age was 22 years for nonsurvivors and 18 years for survivors (P = .01). Small home size, as defined by ≤2 rooms, use of a well for drinking water during a water shortage, and age ≥15 years were risk factors for death in multivariate analysis. Consideration should be given during polio risk assessment planning and outbreak response to water/sanitation status and potential susceptibility to polio in older children and adults. Serosurveys to estimate immunity gaps in older age groups in countries at high risk of polio importation might be useful to guide preparedness and response planning.

  18. Cut points on 0-10 numeric rating scales for symptoms included in the edmonton symptom assessment scale in cancer patients: A systematic review

    NARCIS (Netherlands)

    W.H. Oldenmenger (Wendy); P.J. de Raaf (Pleun); C. de Klerk (Cora); C.C.D. van der Rijt (Carin)

    2013-01-01

    textabstractContext: To improve the management of cancer-related symptoms, systematic screening is necessary, often performed by using 0-10 numeric rating scales. Cut points are used to determine if scores represent clinically relevant burden. Objectives: The aim of this systematic review was to

  19. N. Chomsky am Wendepunkt (N. Chomsky at the Turning Point)?

    Science.gov (United States)

    Weisgerber, Leo

    1971-01-01

    Questions Chomsky's postulation of an innate capacity for language use, and suggests that Chomsky is modifying his theory by including the time factor in his consideration of language acquisition. (RS)

  20. Wind Power: A Turning Point. Worldwatch Paper 45.

    Science.gov (United States)

    Flavin, Christopher

    Recent studies have shown wind power to be an eminently practical and potentially substantial source of electricity and direct mechanical power. Wind machines range from simple water-pumping devices made of wood and cloth to large electricity producing turbines with fiberglass blades nearly 300 feet long. Wind is in effect a form of solar…

  1. FOOD VS. FUEL – A TURNING POINT FOR BIOETHANOL?

    Directory of Open Access Journals (Sweden)

    Katharina Harlander

    2008-09-01

    Full Text Available Recently concerns have been raised that biofuels would affect food prices. Bioethanol is made from sugar or starch containing plants that are also used in food production. In public perception this led to an emotional resistance against biofuels that in real terms is not substantiated. Generally, biofuels are a political product. Triggered by the oil crisis in the early 1970ies national fuel ethanol programmes were first launched in Brazil and in the United States. Concerns regarding energy security and sustainability together with the option of new markets for surplus agricultural production in recent years led to similar policy measures in the European Union and in numerous countries around the globe. Accordingly the industry invested heavily in new bioethanol plants - especially in the US – and created an additional demand for corn and wheat with some record-breaking prices noted in late 2007. A look back into statistics shows a drastic decline of real prices for decades and by now they are only back at the level of 30 years ago. One important detail is the real portion of grain used for bioethanol, which is still only 1.6 percent in the EU and therefore unlikely to be the real driver for the price development. Moreover the share of raw material is up to 70% of bioethanol production cost that makes the bioethanol industry itself a victim of price increases. Subsequently investor interest in this field slowed down, a development also watched in the US. The prospects of the agricultural markets of the European Commission conclude that Europe can do both, nutrition and biofuels.

  2. Turning Points: Improving Honors Student Preparation for Thesis Completion

    Science.gov (United States)

    Patino, Cynthia

    2012-01-01

    This dissertation is an action research study that had as its primary goal to increase retention of honors college students at Arizona State University by implementing an additional advising session during the fifth semester of their academic career. Introducing additional, strategically-timed support for the honors thesis and demystifying the…

  3. The Battle of Moscow - Turning Point of World War II

    Directory of Open Access Journals (Sweden)

    V M Falin

    2015-12-01

    Full Text Available The article is dedicated to the Battle of Moscow in October- December, 1941. Author analyzes the causes of the failure of German army, who tries to encircle and capture Moscow, the events taking place on the outskirts of Moscow, German troops attempts to encircle Moscow. The author presents data on the speech by Adolf Hitler in Berlin on October 5, 1941, in which he acknowledged the failure of the Blitzkrieg and the Battle for Moscow and its suburbs. The researcher uses the documents of the Wehrmacht High Command, which stated that after the Battle of Moscow, German troops could not on any further stage of the war to restore the quality and morale of the armed forces, with whom Reich rushed to a campaign for world domination. The author, a prominent public and political figure of the USSR, also relies on personal recollections, interviews with prominent generals of World War II, including I. Konev.

  4. Socialization Turning Points: An Examination of Change in Organizational Identification.

    Science.gov (United States)

    Bullis, Connie; Bach, Betsy Wackernagel

    To examine perspectives of change in individual-organizational socialization, a study used the retrospective interview technique (RIT) to reconstruct the history and process of individuals' socialization experiences over an 8-month period. Using the RIT, researchers asked subjects, 28 entering graduate students enrolled in three communication…

  5. Thirteen and two fairy tales on the energy turning point

    International Nuclear Information System (INIS)

    Keil, Guenter

    2011-01-01

    Inspired by the choices and changes in the German energy policy, the author proposes controversial texts under the form of tales on the German policy and situation regarding energy. These tales ironically address the German energy model, the uselessness of the seven stopped nuclear power plants, the low cost of the energy turnaround made by the German government, the environmental benefit of renewable energies, the high potential of energy savings, the new means of electricity storage, the electric car as means to store electricity, the low cost of solar energy ('Sun does not send any bill'), the wind energy (the wind turbine fleet in such place can supply so much households), the geothermal energy, the so-called technological leap, the benefit of decentralized energy production, the numerous jobs created by renewable energies, the ecologic electric current, and the search for a final nuclear waste disposal site

  6. Averroes' Physics A Turning Point in Medieval Natural Philosophy

    CERN Document Server

    Glasner, Ruth

    2009-01-01

    Ruth Glasner presents an illuminating reappraisal of Averroes' physics. Glasner is the first scholar to base her interpretation on the full range of Averroes' writings, including texts that are extant only in Hebrew manuscripts and have not been hitherto studied. She reveals that Averroes changed his interpretation of the basic notions of physics - the structure of corporeal reality and the definition of motion - more than once. After many hesitations he offers a bold newinterpretation of physics which Glasner calls 'Aristotelian atomism'. Ideas that are usually ascribed to scholastic scholars

  7. Adaptation Turning Points in River Restoration? The Rhine salmon case

    NARCIS (Netherlands)

    Bölscher, T.; Slobbe, van E.J.J.; Vliet, van M.T.H.; Werners, S.E.

    2013-01-01

    Abstract: Bringing a sustainable population of Atlantic salmon (Salmo salar) back into the Rhine, after the species became extinct in the 1950s, is an important environmental ambition with efforts made both by governments and civil society. Our analysis finds a significant risk of failure of salmon

  8. The turning point in the number of traffic fatalities

    DEFF Research Database (Denmark)

    Brüde, Ulf; Elvik, Rune

    2015-01-01

    than before. Such a change would suggest that road safety policy became more effective. Analysis of data for six countries (Denmark, Great Britain, Netherlands, Norway, Sweden, United States) lends stronger support to the latter hypothesis than to the former. The lesson for policy makers, in particular...

  9. Butane/Propane. An economical and technical turning point

    International Nuclear Information System (INIS)

    Fridman, G.

    1998-01-01

    During 1997, the sales of all energies dropped. Even for the liquid fuel, its consumption came back under the level of three million tons. To fight this regression, liquid fuels producers innovate in the cisterns and the bottles and carry on their efforts in logistic matters. Hopes are allowed thanks to the new taxing and the demand increasing in the car industry, for liquid fuels. (A.L.B.)

  10. Sandstone Turning by Abrasive Waterjet

    Czech Academy of Sciences Publication Activity Database

    Hlaváček, Petr; Cárach, J.; Hloch, Sergej; Vasilko, K.; Klichová, Dagmar; Klich, Jiří; Lehocká, D.

    2015-01-01

    Roč. 48, č. 6 (2015), s. 2489-2493 ISSN 0723-2632 R&D Projects: GA MŠk ED2.1.00/03.0082; GA MŠk(CZ) LO1406 Institutional support: RVO:68145535 Keywords : turning away from the jet * conventional turning towards the jet * sandstone * abrasive water jet Subject RIV: JQ - Machines ; Tools Impact factor: 2.386, year: 2015 http://www.springerprofessional.de/sandstone-turning-by-abrasive-waterjet/6038028.html

  11. Modification of a hydrophobic layer by a point mutation in syntaxin 1A regulates the rate of synaptic vesicle fusion.

    Directory of Open Access Journals (Sweden)

    Robert D Lagow

    2007-04-01

    Full Text Available Both constitutive secretion and Ca(2+-regulated exocytosis require the assembly of the soluble N-ethylmaleimide-sensitive factor attachment protein receptor (SNARE complexes. At present, little is known about how the SNARE complexes mediating these two distinct pathways differ in structure. Using the Drosophila neuromuscular synapse as a model, we show that a mutation modifying a hydrophobic layer in syntaxin 1A regulates the rate of vesicle fusion. Syntaxin 1A molecules share a highly conserved threonine in the C-terminal +7 layer near the transmembrane domain. Mutation of this threonine to isoleucine results in a structural change that more closely resembles those found in syntaxins ascribed to the constitutive secretory pathway. Flies carrying the I254 mutant protein have increased levels of SNARE complexes and dramatically enhanced rate of both constitutive and evoked vesicle fusion. In contrast, overexpression of the T254 wild-type protein in neurons reduces vesicle fusion only in the I254 mutant background. These results are consistent with molecular dynamics simulations of the SNARE core complex, suggesting that T254 serves as an internal brake to dampen SNARE zippering and impede vesicle fusion, whereas I254 favors fusion by enhancing intermolecular interaction within the SNARE core complex.

  12. Prediction of beta-turns with learning machines.

    Science.gov (United States)

    Cai, Yu-Dong; Liu, Xiao-Jun; Li, Yi-Xue; Xu, Xue-biao; Chou, Kuo-Chen

    2003-05-01

    The support vector machine approach was introduced to predict the beta-turns in proteins. The overall self-consistency rate by the re-substitution test for the training or learning dataset reached 100%. Both the training dataset and independent testing dataset were taken from Chou [J. Pept. Res. 49 (1997) 120]. The success prediction rates by the jackknife test for the beta-turn subset of 455 tetrapeptides and non-beta-turn subset of 3807 tetrapeptides in the training dataset were 58.1 and 98.4%, respectively. The success rates with the independent dataset test for the beta-turn subset of 110 tetrapeptides and non-beta-turn subset of 30,231 tetrapeptides were 69.1 and 97.3%, respectively. The results obtained from this study support the conclusion that the residue-coupled effect along a tetrapeptide is important for the formation of a beta-turn.

  13. Cooling rate and starvation affect supercooling point and cold tolerance of the Khapra beetle, Trogoderma granarium Everts fourth instar larvae (Coleoptera: Dermestidae).

    Science.gov (United States)

    Mohammadzadeh, M; Izadi, H

    2018-01-01

    Trogoderma granarium Everts (Coleoptera: Dermestidae) is an important insect pest of stored products. In this study, the survival strategies of T. granarium fourth instar larvae were investigated at different sub-zero temperatures following different cooling rates, acclimation to different relative humidity (RH) and different starvation times. Our results show that larvae of T. granarium are freeze-intolerant. There was a strong link between cooling rates and supercooling point, which means the slower the decrease in temperature, the lower the supercooling point. Trehalose content was greater in insects cooled at a rate of 0.5°C/min. According to results, the RH did not affect supercooling point. However, acclimation to an RH of 25% increased mortality following exposure to - 10°C/24h. The time necessary to reach 95% mortality was 1737h and 428h at - 5°C and - 10°C. The lowest lipid and trehalose content was detected in insects acclimated to 25% RH, although, the different RH treatments did not significantly affect glycogen content of T. granarium larvae. The supercooling point of larvae was gradually increased following starvation. By contrast, fed larvae had the greatest lipid, glycogen, and trehalose content, and insects starved for eight days had the lowest energy contents. There was a sharp decline in the survival of larvae between - 11 and - 18°C after 1h exposure. Our results indicate the effects of cooling rate and starvation on energy reserves and survival of T. granarium. We conclude that T. granarium may not survive under similar stress conditions of the stored products. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Effect of farmyard manure rate on water erosion of a Mediterranean soil: determination of the critical point of inefficacy

    Science.gov (United States)

    Annabi, Mohamed; Bahri, Haithem; Cheick M'Hamed, Hatem; Hermessi, Taoufik

    2016-04-01

    Intensive cultivation of soils, using multiple soil tillage, led to the decrease of their organic matter content and structural stability in several cultivated area of the Mediterranean countries. In these degraded soils, the addition of organic products, traditionally the animal manure, should improve soil health among them the resistance of soil to water erosion. The aim of this study was to evaluate after 1 year of the addition to a cambisoil different doses of farmyard manure on soil organic matter content, on microbial activity and on aggregate stability (proxy to soil resistance to water erosion). The statistical process (bilinear model) was used to found a point at which the addition of the organic product no longer influences the soil resistance to erosion. The farmyard manure issued from a cow breeding was composted passively during 4 months and used to amend a small plots of a cultivated cambisol (silty-clay texture, 0.9% TOC) located in the northeast of Tunisia (Morneg region). The manure was intimately incorporate to the soil. The manure organic matter content was 31%, and its isohumic coefficient was 49%. Twelve dose of manure were tested: from 0 to 220 t C.ha-1. The experiment was started on September 2011. In November 2012, soil sampling was done and soil organic carbon content (Walkley-Black method) and soil aggregate stability (wet method of Le Bissonnais) were assessed. A laboratory incubations of soil+manure mixtures, with the same proportions as tested in the field conditions, was carried at 28°C and at 75% of the mixture field capacity water retention. Carbon mineralization was monitored during three months incubation. Results show that the addition of farmyard manure stimulated the microbial activity proportionally to the added dose. This activation is due to the presence of easily biodegradable carbon in the manure, which increases with increasing manure dose. On the other hand, the addition of manure increased the aggregate stability with

  15. Turning collectors for solar radiation

    Science.gov (United States)

    Barak, Amitzur Z.

    1976-01-01

    A device is provided for turning a solar collector about the polar axis so that the collector is directed toward the sun as the sun tracks the sky each day. It includes two heat-expansive elements and a shadow plate. In the morning a first expansive element is heated, expands to turn the collector to face the sun, while the second expansive element is shaded by the plate. In the afternoon the second element is heated, expands to turn the collector to face the sun, while the first is shaded by the plate.

  16. Train turn restrictions and line plan performance

    DEFF Research Database (Denmark)

    Burggraeve, Sofie; Bull, Simon Henry; Lusby, Richard Martin

    In this paper we study the impact of the `turn conditions' in end stations on the performance of a line plan. If trains have to turn on their platform in an end station, the yoccupy the platform for several minutes. A more preferred option, from a timetabling point of view, would be that a train...... in a exible and large enough shunt. Starting from a given line plan, we compare two timetables, one where trains have to turn on their platform and one where trains can turn in a shunt. We evaluate the impact on the performance of the line plan by its feasibility for timetabling,the minimum overall buffer...... disappears from the platform in its end station after dwelling and only appears again when departing for a subsequent trip. In this case, the train will not interfere with other trains that dwell on the platform during the time between these events. However, this option is only possible if the train can stay...

  17. Continuous improvements of defectivity rates in immersion photolithography via functionalized membranes in point-of-use photochemical filtration

    Science.gov (United States)

    D'Urzo, Lucia; Bayana, Hareen; Vandereyken, Jelle; Foubert, Philippe; Wu, Aiwen; Jaber, Jad; Hamzik, James

    2017-03-01

    Specific "killer-defects", such as micro-line-bridges are one of the key challenges in photolithography's advanced applications, such as multi-pattern. These defects generate from several sources and are very difficult to eliminate. Pointof-use filtration (POU) plays a crucial role on the mitigation, or elimination, of such defects. Previous studies have demonstrated how the contribution of POU filtration could not be studied independently from photoresists design and track hardware settings. Specifically, we investigated how an effective combination of optimized photoresist, filtration rate, filtration pressure, membrane and device cleaning, and single and multilayer filter membranes at optimized pore size could modulate the occurrence of such defects [1, 2, 3 and 4]. However, the ultimate desired behavior for POU filtration is the selective retention of defect precursor molecules contained in commercially available photoresist. This optimal behavior can be achieved via customized membrane functionalization. Membrane functionalization provides additional non-sieving interactions which combined with efficient size exclusion can selectively capture certain defect precursors. The goal of this study is to provide a comprehensive assessment of membrane functionalization applied on an asymmetric ultra-high molecular weight polyethylene (UPE) membrane at different pore size. Defectivity transferred in a 45 nm line 55 nm space (45L/55S) pattern, created through 193 nm immersion (193i) lithography with a positive tone chemically amplified resist (PT-CAR), has been evaluated on organic under-layer coated wafers. Lithography performance, such as critical dimensions (CD), line width roughness (LWR) and focus energy matrix (FEM) is also assessed.

  18. Turning around Newton's Second Law

    Science.gov (United States)

    Goff, John Eric

    2004-01-01

    Conceptual and quantitative difficulties surrounding Newton's second law often arise among introductory physics students. Simply turning around how one expresses Newton's second law may assist students in their understanding of a deceptively simple-looking equation.

  19. Diamond turning of Si and Ge single crystals

    Energy Technology Data Exchange (ETDEWEB)

    Blake, P.; Scattergood, R.O.

    1988-12-01

    Single-point diamond turning studies have been completed on Si and Ge crystals. A new process model was developed for diamond turning which is based on a critical depth of cut for plastic flow-to-brittle fracture transitions. This concept, when combined with the actual machining geometry for single-point turning, predicts that {open_quotes}ductile{close_quotes} machining is a combined action of plasticity and fracture. Interrupted cutting experiments also provide a meant to directly measure the critical depth parameter for given machining conditions.

  20. The ontological turn meets the certainty of death.

    Science.gov (United States)

    McDonald, Maryon

    2017-08-01

    The 'ontological turn' involves some anthropological points of long standing but the approaches recently coordinated into this turn have been presented as a 'call to arms', as shaking up 'mono-realist singularities' and as inherently political. This fighting talk has no doubt made important contributions to anthropology and insights from the ontological turn can help in anthropological understandings of medical practices. However, this paper contends that this helpfulness is also limited and that a call to arms may be inappropriate. This point is made through an ethnographic understanding of medical concern about the diagnosis of death.

  1. What 'empirical turn in bioethics'?

    Science.gov (United States)

    Hurst, Samia

    2010-10-01

    Uncertainty as to how we should articulate empirical data and normative reasoning seems to underlie most difficulties regarding the 'empirical turn' in bioethics. This article examines three different ways in which we could understand 'empirical turn'. Using real facts in normative reasoning is trivial and would not represent a 'turn'. Becoming an empirical discipline through a shift to the social and neurosciences would be a turn away from normative thinking, which we should not take. Conducting empirical research to inform normative reasoning is the usual meaning given to the term 'empirical turn'. In this sense, however, the turn is incomplete. Bioethics has imported methodological tools from empirical disciplines, but too often it has not imported the standards to which researchers in these disciplines are held. Integrating empirical and normative approaches also represents true added difficulties. Addressing these issues from the standpoint of debates on the fact-value distinction can cloud very real methodological concerns by displacing the debate to a level of abstraction where they need not be apparent. Ideally, empirical research in bioethics should meet standards for empirical and normative validity similar to those used in the source disciplines for these methods, and articulate these aspects clearly and appropriately. More modestly, criteria to ensure that none of these standards are completely left aside would improve the quality of empirical bioethics research and partly clear the air of critiques addressing its theoretical justification, when its rigour in the particularly difficult context of interdisciplinarity is what should be at stake.

  2. CONNECTION OF TURN AHEAD AND TURN BACK WITH MOTORIC ABILITIES OF THE FOURTH GRADE OF HIGH SCHOOL

    Directory of Open Access Journals (Sweden)

    Jovica Petković

    2008-08-01

    Full Text Available The research is done for the purpose of determination and defining of the level of connection between some motoric abilities with success in realization of programmed contents from the area of gymnastics (turn ahead and turn back. The research is done on the sample of fifty students from the fourth grade of High School, on ten motoric tests and on two specific motoric assignments – turn ahead and turn back. The results of this research clearly point that there exist the multitude of statistically important coefficients of correlation between treated motoric abilities and applied motoric assignments.

  3. Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 This test method covers the measurement of the heat-transfer rate or the heat flux to the surface of a solid body (test sample) using the measured transient temperature rise of a thermocouple located at the null point of a calorimeter that is installed in the body and is configured to simulate a semi-infinite solid. By definition the null point is a unique position on the axial centerline of a disturbed body which experiences the same transient temperature history as that on the surface of a solid body in the absence of the physical disturbance (hole) for the same heat-flux input. 1.2 Null-point calorimeters have been used to measure high convective or radiant heat-transfer rates to bodies immersed in both flowing and static environments of air, nitrogen, carbon dioxide, helium, hydrogen, and mixtures of these and other gases. Flow velocities have ranged from zero (static) through subsonic to hypersonic, total flow enthalpies from 1.16 to greater than 4.65 × 101 MJ/kg (5 × 102 to greater than 2 × 104 ...

  4. Simultaneous and multi-point measurement of ammonia emanating from human skin surface for the estimation of whole body dermal emission rate.

    Science.gov (United States)

    Furukawa, Shota; Sekine, Yoshika; Kimura, Keita; Umezawa, Kazuo; Asai, Satomi; Miyachi, Hayato

    2017-05-15

    Ammonia is one of the members of odor gases and a possible source of odor in indoor environment. However, little has been known on the actual emission rate of ammonia from the human skin surface. Then, this study aimed to estimate the whole-body dermal emission rate of ammonia by simultaneous and multi-point measurement of emission fluxes of ammonia employing a passive flux sampler - ion chromatography system. Firstly, the emission fluxes of ammonia were non-invasively measured for ten volunteers at 13 sampling positions set in 13 anatomical regions classified by Kurazumi et al. The measured emission fluxes were then converted to partial emission rates using the surface body areas estimated by weights and heights of volunteers and partial rates of 13 body regions. Subsequent summation of the partial emission rates provided the whole body dermal emission rate of ammonia. The results ranged from 2.9 to 12mgh -1 with an average of 5.9±3.2mgh -1 per person for the ten healthy young volunteers. The values were much greater than those from human breath, and thus the dermal emission of ammonia was found more significant odor source than the breath exhalation in indoor environment. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. Relationship between non-genital tender point tenderness and intra-vaginal muscle pain intensity: Ratings in women with provoked vestibulodynia and implications for treatment

    Science.gov (United States)

    PHILLIPS, Nancy; BROWN, Candace; BACHMANN, Gloria; WAN, Jim; WOOD, Ronald; ULRICH, Dagny; BACHOUR, Candi; FOSTER, David

    2016-01-01

    Background Vulvodynia is a chronic vulvar pain disorder and fibromyalgia is a chronic widespread musculoskeletal pain disorder; both of unknown etiology. Association of these conditions is well documented. Intra-vaginal algometer measurement of tenderness to pressure applied to the pelvic floor muscles helps to define vulvodynia associated with musculoskeletal factors. Women with both vulvodynia and fibromyalgia might have increased pelvic muscle pain compared to women with vulvodynia alone, defining the possible link of these two conditions. Objective 1) correlate pain intensity during the non-genital tender point tenderness examination to pain intensity with the vaginal algometer in women with provoked vestibulodynia, 2) determine whether subjects with provoked vestibulodynia and fibromyalgia had higher pain intensity scores with the vaginal algometer than those without fibromyalgia. Study Design Ninety-two subjects referred for vulvar pain were confirmed to have provoked vestibulodynia using the cotton swab test. A diagnosis of fibromyalgia was made if pain was present (Numerical rating scale> 1) in at least 11 sites of the 18-point non-genital tender point tenderness exam. Vaginal pain sensitivity was measured using an intra-vaginal pressure algometer, where 0.1, 0.3, and 0.5 kg/cm2 forces were applied digitally in random assignment by force and location to the right and left iliococcygeus muscle regions and the posterior vaginal wall. Both tender point tenderness and algometer pain intensity were reported on a 0 (no pain) to 10 (worse pain) numeric rating scale. Correlations were computed between the composite pain intensity (total of rating scale from each pressure threshold at specified site) of non-genital and those of iliococcygeus regions and the posterior vaginal wall. Independent t-tests were used to determine differences in iliococcygeus regions and the posterior vaginal algometer pain ratings and presence or absence of fibromyalgia. The significance

  6. Turning a page of Agency history

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1969-07-01

    Recent developments, and especially the new and critical interest of developing countries, have helped to mark the turning of a page in the Agency's history. If the present situation in the economics of nuclear power does not change there is a danger that developing countries will lag further and further behind the advanced countries in its use. Shortage of resources impose a brake on Agency efforts to promote benefits of nuclear techniques, especially by technical assistance. These were some of the points made by Dr. Sigvard Eklund, the Director General, when he presented the Agency's annual report to the Economic and Social Council (ECOSOC) in July. (author)

  7. Study on pulsed-discharge devices with high current rising rate for point spot short-wavelength source in dense plasma observations

    International Nuclear Information System (INIS)

    Tachinami, Fumitaka; Anzai, Nobuyuki; Sasaki, Toru; Kikuchi, Takashi; Harada, Nob.

    2014-01-01

    A pulsed-power generator with high current rise based on a pulse-forming-network was studied toward generating intense point-spot X-ray source. To obtain the high rate of current rise, we have designed the compact discharge device with low circuit inductance. The results indicate that the inductance of the compact discharge device was dominated by a gap switch inductance. To reduce the gap switch inductance and operation voltage, the feasible gap switch inductance in the vacuum chamber has been estimated by the circuit simulation. The gap switch inductance can be reduced by the lower pressure operation. It means that the designed discharge device achieves the rate of current rise of 10 12 A/s

  8. Chemical Reaction Rates from Ring Polymer Molecular Dynamics: Zero Point Energy Conservation in Mu + H2 → MuH + H.

    Science.gov (United States)

    Pérez de Tudela, Ricardo; Aoiz, F J; Suleimanov, Yury V; Manolopoulos, David E

    2012-02-16

    A fundamental issue in the field of reaction dynamics is the inclusion of the quantum mechanical (QM) effects such as zero point energy (ZPE) and tunneling in molecular dynamics simulations, and in particular in the calculation of chemical reaction rates. In this work we study the chemical reaction between a muonium atom and a hydrogen molecule. The recently developed ring polymer molecular dynamics (RPMD) technique is used, and the results are compared with those of other methods. For this reaction, the thermal rate coefficients calculated with RPMD are found to be in excellent agreement with the results of an accurate QM calculation. The very minor discrepancies are within the convergence error even at very low temperatures. This exceptionally good agreement can be attributed to the dominant role of ZPE in the reaction, which is accounted for extremely well by RPMD. Tunneling only plays a minor role in the reaction.

  9. Os pontos de virada na formação do professor universitário: um estudo sobre o mecanismo da identificação The "turning points" in the formation of the university teacher: a study of the mechanism of identification

    Directory of Open Access Journals (Sweden)

    Claudia Rosa Riolfi

    2007-08-01

    Full Text Available O presente artigo tem como objeto a formação do professor universitário. Volta-se para a elucidação das seguintes questões: a os avanços para a compreensão da natureza do percurso a ser trilhado para que se instale, no professor universitário em formação, um desejo que encontre seu norte no ato de ensinar que são possíveis de se levar em consideração, ao tomar em consideração a psicanálise lacaniana; e b a configuração dos pontos de virada por meio dos quais um sujeito em formação vem a construir um lugar singular de onde possa criar um trabalho próprio de professor universitário. Postula a necessidade do ultrapassamento do que estamos chamando de pontos de virada para que aquele que está em um percurso de formação, para se tornar professor universitário, possa vir a criar um espaço próprio para o exercício da docência, fundando, portanto, a possibilidade da re-invenção de um si próprio. Para tal fim, estamos recorrendo ao conceito de identificação - tal qual é visto na psicanálise de orientação lacaniana - para elucidar a experiência decorrida no âmbito do Programa de Aperfeiçoamento de Ensino (PAE, ao longo de 2005, em duas disciplinas (cujos alunos são prioritariamente oriundos da graduação em Lingüística da Faculdade de Filosofia, Letras e Ciências Humanas da USP, que têm a carga horária de 120 horas cada uma (60 em sala de aula e 60 de estágio supervisionado.This article takes as its object the formation of the university teacher, turning its attention to the elucidation of the following issues: a the developments in the understanding of the nature of the path to be followed so as to instill in the university teacher under formation a will oriented towards the act of teaching, developments that can be assessed from the perspective of Lacanian psychoanalysis; and b the configuration of "turning points" after which a subject under formation builds a singular place where it is possible to

  10. Relationship between nongenital tender point tenderness and intravaginal muscle pain intensity: ratings in women with provoked vestibulodynia and implications for treatment.

    Science.gov (United States)

    Phillips, Nancy; Brown, Candace; Bachmann, Gloria; Wan, Jim; Wood, Ronald; Ulrich, Dagny; Bachour, Candi; Foster, David

    2016-12-01

    Vulvodynia is a chronic vulvar pain disorder and fibromyalgia is a chronic widespread musculoskeletal pain disorder, both of unknown etiology. Association of these conditions is well documented. Intravaginal algometer measurement of tenderness to pressure applied to the pelvic floor muscles helps define vulvodynia associated with musculoskeletal factors. Women with both vulvodynia and fibromyalgia might have increased pelvic muscle pain compared to women with vulvodynia alone, defining the possible link of these 2 conditions. We sought to: (1) correlate pain intensity during the nongenital tender point tenderness examination to pain intensity with the vaginal algometer in women with provoked vestibulodynia, and (2) determine whether subjects with provoked vestibulodynia and fibromyalgia had higher pain intensity scores with the vaginal algometer than those without fibromyalgia. In all, 92 subjects referred for vulvar pain were confirmed to have provoked vestibulodynia using the cotton swab test. A diagnosis of fibromyalgia was made if pain was present (numeric rating scale >1) in at least 11 sites of the 18-point nongenital tender point tenderness exam. Vaginal pain sensitivity was measured using an intravaginal pressure algometer, where 0.1, 0.3, and 0.5 kg/cm 2 forces were applied digitally in random assignment by force and location to the right and left iliococcygeus muscle regions and the posterior vaginal wall. Both tender point tenderness and algometer pain intensity were reported on a 0 (no pain) to 10 (worse pain) numeric rating scale. Correlations were computed between the composite pain intensity (total of rating scale from each pressure threshold at specified site) of nongenital and those of iliococcygeus regions and the posterior vaginal wall. Independent t tests were used to determine differences in iliococcygeus regions and the posterior vaginal algometer pain ratings and presence or absence of fibromyalgia. The significance level was at P pain

  11. Generation of standard gas mixtures of halogenated, aliphatic, and aromatic compounds and prediction of the individual output rates based on molecular formula and boiling point.

    Science.gov (United States)

    Thorenz, Ute R; Kundel, Michael; Müller, Lars; Hoffmann, Thorsten

    2012-11-01

    In this work, we describe a simple diffusion capillary device for the generation of various organic test gases. Using a set of basic equations the output rate of the test gas devices can easily be predicted only based on the molecular formula and the boiling point of the compounds of interest. Since these parameters are easily accessible for a large number of potential analytes, even for those compounds which are typically not listed in physico-chemical handbooks or internet databases, the adjustment of the test gas source to the concentration range required for the individual analytical application is straightforward. The agreement of the predicted and measured values is shown to be valid for different groups of chemicals, such as halocarbons, alkanes, alkenes, and aromatic compounds and for different dimensions of the diffusion capillaries. The limits of the predictability of the output rates are explored and observed to result in an underprediction of the output rates when very thin capillaries are used. It is demonstrated that pressure variations are responsible for the observed deviation of the output rates. To overcome the influence of pressure variations and at the same time to establish a suitable test gas source for highly volatile compounds, also the usability of permeation sources is explored, for example for the generation of molecular bromine test gases.

  12. Turn Management or Impression Management?

    NARCIS (Netherlands)

    ter Maat, Mark; Heylen, Dirk K.J.; Ruttkay, Z.M.; Kipp, M.; Nijholt, Antinus; Vilhjálmsson, H.H.

    2009-01-01

    We look at how some basic choices in the management of turns influence the impression that people get from an agent. We look at scales concerning personality, emotion and interpersonal stance. We do this by a person perception study, or rather an agent perception study, using simulated conversations

  13. Professional Employees Turn to Unions

    Science.gov (United States)

    Chamot, Dennis

    1976-01-01

    White-collar and professional employees are increasingly turning to unions to combat their loss of independence as employees of large organizations. Managers should realize that they and professional employees have different viewpoints about job situations and that the current trend toward white-collar unionism is apt to continue. (JG)

  14. Why Does Hair Turn Gray?

    Science.gov (United States)

    ... out, but people with naturally lighter hair are just as likely to go gray. From the time a person notices a few gray hairs, it may take more than 10 years for all of that person's hair to turn ... really believe that this happens. Just in case, try not to freak out your ...

  15. Phenomenology and the Empirical Turn

    NARCIS (Netherlands)

    Zwier, Jochem; Blok, Vincent; Lemmens, Pieter

    2016-01-01

    This paper provides a phenomenological analysis of postphenomenological philosophy of technology. While acknowledging that the results of its analyses are to be recognized as original, insightful, and valuable, we will argue that in its execution of the empirical turn, postphenomenology forfeits

  16. Exploring interaction between a non-speaking boy using aided AAC and his everyday communication partners: features of turn organizing and turn design

    DEFF Research Database (Denmark)

    Pilesjö, Maja Sigurd; Rasmussen, Gitte

    2011-01-01

    -at-action is suggested. The analyses demonstrate that the boy’s turn-at-actions are oriented to as a co-constructed and thus interactionally achieved unit: the boy points at a bliss symbol which is given voice by the speaking co-participant. In and through the relevant made voicing of the turn-at-action, a turn...... AAC, bliss symbolics. The analysis indicates that the participants can collaborately create and orient to units in interaction equivalent to turns in interaction although they differ dramatically from ordinary turns-at-talk. In order to capture the nature of the described units, the category turn...

  17. A prospective randomized study concerning the point a dose in high-dose rate intracavitary therapy for carcinoma of the uterine cervix. The final results

    International Nuclear Information System (INIS)

    Chatani, M.; Matayoshi, Y.; Masaki, N.; Teshima, T.; Inoue, T.

    1994-01-01

    Between January 1983 and February 1989, a total of 165 patients with carcinoma of the unterine cervix was entered in a prospective randomized study concerning the point A dose of HDR therapy (6 Gy/fraktion vs 7.5 Gy/fraction) and external irradiation dose at Department of Radiation Therapy, The Center for Adult Diseases, Osaka. UICC stage distribution of patients was as follows: Stage IA=4, stage IB=33, stage IIA=18, stage IIB=38, stage III=57, stage IV=15. Overall 5-year cause specific survivals were as follows: Stage IA=100%, stage IB=96%, stage IIA=92%, stage IIB=79%, stage III=57%, stage IV=27%. In each stage, 5-year survival rates in groups A and B were 100%, 93% in stage I, 82% and 85% in stage II, 62% and 52% in stage II and 22% and 31% in stage IV, respectively. There were no statistically significant differences among these survival curves in each stage. Five-year local failure rates were 16% in group A and 16% in group B (p=0.9096), and corresponding distant failure rates were 23% in group A and 19% in group B (p=0.2955). Moderate-to-severe complications requiring treatment (Kottmeier's grade 2 or more) were noted in 6 patients (7%) in group A and 6 patients (7%) in group B. All of the bladder and rectal complications needed medical treatment (Kottmeier's grade 2). Severe complications receiving surgery were noted in 4 patients (A: 1; B: 3), i.e., small intestine 3 and sigmoid colon 1 patient. Another 1 patient (A) was dead of ileus. There were no statistically significant differences between 2 treatment schedules in survival rates, failure patterns and complications rates. This fact suggests that small number of fractions (7.5 Gy/fraction) may be advantageous because of short duration and a low load of treatment. (orig.) [de

  18. Habitat use by mountain nyala Tragelaphus buxtoni determined using stem bite diameters at point of browse, bite rates, and time budgets in the Bale Mountains National Park, Ethiopia

    Directory of Open Access Journals (Sweden)

    Solomon A. TADESSE, Burt P. KOTLER

    2013-12-01

    Full Text Available We studied the habitat use of mountain nyala Tragelaphus buxtoni in the northern edge of the Bale Mountains National Park, Ethiopia. The aims of this study were to: (1 measure and quantify habitat-specific stem bite diameters of mountain nyala foraging on common natural plant species in two major habitat types (i.e. grasslands versus woodlands, and (2 quantify the bite rates (number of bites per minute and the activity time budgets of mountain nyala as functions of habitat type and sex-age category. We randomly laid out three transects in each habitat type. Following each transect, through focal animal observations, we assessed and quantified stem diameters at point of browse (dpb, bite rates, and time budgets of mountain nyala in grasslands versus woodlands. Stem dpb provide a measure of natural giving-up densities (GUDs and can be used to assess foraging costs and efficiencies, with greater stem dpb corresponding to lower costs and greater efficiencies. The results showed that stem dpb, bite rates, induced vigilance, and proportion of time spent in feeding differed between habitats. In particular, mountain nyala had greater stem dpb, higher bite rates, and spent a greater proportion of their time in feeding and less in induced vigilance in the grasslands. In addition, adult females had the highest bite rates, and the browse species Solanum marginatum had the greatest stem dpb. Generally, grasslands provide the mountain nyala with several advantages over the woodlands, including offering lower foraging costs, greater safety, and more time for foraging. The study advocates how behavioural indicators and natural GUDs are used to examine the habitat use of the endangered mountain nyala through applying non-invasive techniques. We conclude that the resulting measures are helpful for guiding conservation and management efforts and could be applicable to a number of endangered wildlife species including the mountain nyala [Current Zoology 59 (6 : 707

  19. Diamond turning machine controller implementation

    Energy Technology Data Exchange (ETDEWEB)

    Garrard, K.P.; Taylor, L.W.; Knight, B.F.; Fornaro, R.J.

    1988-12-01

    The standard controller for a Pnuemo ASG 2500 Diamond Turning Machine, an Allen Bradley 8200, has been replaced with a custom high-performance design. This controller consists of four major components. Axis position feedback information is provided by a Zygo Axiom 2/20 laser interferometer with 0.1 micro-inch resolution. Hardware interface logic couples the computers digital and analog I/O channels to the diamond turning machine`s analog motor controllers, the laser interferometer, and other machine status and control information. It also provides front panel switches for operator override of the computer controller and implement the emergency stop sequence. The remaining two components, the control computer hardware and software, are discussed in detail below.

  20. Turning for Ulcer Reduction (TURN) Study: An Economic Analysis.

    Science.gov (United States)

    Paulden, Mike; Bergstrom, Nancy; Horn, Susan D; Rapp, Mary; Stern, Anita; Barrett, Ryan; Watkiss, Michael; Krahn, Murray

    2014-01-01

    The Turning for Ulcer Reduction (TURN) study was a multisite, randomized controlled trial that aimed to determine the optimal frequency of turning nursing facility residents with mobility limitations who are at moderate and high risk for pressure ulcer (PrU) development. Here we present data from the economic analysis. This economic analysis aims to estimate the economic consequences for Ontario of switching from a repositioning schedule of 2-hour intervals to a schedule of 3-hour or 4-hour intervals. Costs considered in the analysis included those associated with nursing staff time spent repositioning residents and with incontinent care supplies, which included briefs, barrier cream, and washcloths. The total economic benefit of switching to 3-hour or 4-hour repositioning is estimated to be $11.05 or $16.74 per day, respectively, for every resident at moderate or high risk of developing PrUs. For a typical facility with 123 residents, 41 (33%) of whom are at moderate or high risk of developing PrUs, the total economic benefit is estimated to be $453 daily for 3-hour or $686 daily for 4-hour repositioning. For Ontario as a whole, assuming that there are 77,933 residents at 634 LTC facilities, 25,927 (33%) of whom are at moderate or high risk of developing PrUs, the total economic benefits of switching to 3-hour or 4-hour repositioning are estimated to be $286,420 or $433,913 daily, respectively, equivalent to $104.5 million or $158.4 million per year. We did not consider the savings the Ontario Ministry of Health and Long-Term Care might incur should less frequent repositioning reduce the incidence of work-related injury among nursing staff, so our findings are potentially conservative. A switch to 3-hour or 4-hour repositioning appears likely to yield substantial economic benefits to Ontario without placing residents at greater risk of developing PrUs.

  1. Study of radiation exposure rate on the measurement points in Kartini reactor hall as based to determine operation safety parameters (KBO)

    International Nuclear Information System (INIS)

    Mahrus Salam; Elisabeth Supriyatni; Fajar Panuntun

    2016-01-01

    In the operation of nuclear facility there are safety parameters, which is the value of the conservatively maximum limit to ensure that all of the uncertainty in the analysis of facility operations safety have been considered, such as uncertainty of measurement, response time and uncertainty calculation tool, and is get a long to others value of normal operating condition limits, in other words, there are still allowed or permitted. Calculation of the radiation exposure rate on five measurement points (50 cm above the water surface of reactor pool, above interim storage (bulk shielding), reactor deck, thermal column and sub critical facility) and to be compared to the operation safety parameters (KBO) of Kartini reactor. The exposure rate value is obtained by calculating the source term of radioactivity on the core, attenuation resulting from the radiation shielding and measurement distance. From the calculation obtained that the value of gamma exposure rate of 50 cm above the water surface of reactor pool is 96.91 mR/hr (KBO<100 mR/hr), on the deck of Bulk Shielding amounted to 1.70 mR/h (KBO<2.5 mR/hr), on the reactor deck amounted to 5.73 mR/hr (KBO<10 mR/hr), on the Thermal Column amounted to 2.73 mR/hr (KBO<10 mR/hr) and on the sub critical facility amounted to 1.148 mR/hr (KBO<2.5 mR/hr). The value of gamma exposure rate at 5 locations measurements are still less than the operation safety parameters (KBO), it means that the reactor is safe to be operated. (author)

  2. Cryopreservation of boar semen. II: Effect of cooling rate and duration of freezing point plateau on boar semen frozen in mini- and maxi-straws and plastic bags.

    Science.gov (United States)

    Bwanga, C O; Einarsson, S; Rodriguez-Martinez, H

    1991-01-01

    The post-thaw motility and the acrosome integrity of semen from 4 boars frozen with a programmable freezing machine, in mini (0.25 ml) and maxi (5 ml) plastic straws and in 10 x 5 cm Teflon FEP-plastic bags (0.12 mm thick, 5 ml), were compared. The freezing of the semen was monitored by way of thermo-couples placed in the straws and the bags. Three freezing programmes were used, namely A: from +5 degrees C, at a rate of 3 degrees C/min, to -6 degrees C, held for 1 min at -6 degrees C, and followed by a cooling rate of 20 degrees C/min to -100 degrees C; B: a similar curve except that there was no holding time at -6 degrees C and that the cooling rate was 30 degrees C/min, and C: from +5 degrees C to -100 degrees C, with a cooling rate of 35 degrees C/min, followed by storage in liquid N2. Despite the freezing curve assayed, both the mini-straws and the bags depicted much shorter freezing point plateaus as compared to the maxi-straws. Post-thaw sperm motility as well as the amount of normal apical ridges were equally significantly higher when semen was frozen in mini-straws or in bags than in maxi-straws. Significant differences in these post-thawing parameters were obtained between the freezing curves used. The stepwise freezing procedure A appeared as the best alternative for boar semen, considering this in vitro evaluation.

  3. A non-rigid point matching method with local topology preservation for accurate bladder dose summation in high dose rate cervical brachytherapy

    International Nuclear Information System (INIS)

    Chen, Haibin; Liao, Yuliang; Zhen, Xin; Zhou, Linghong; Zhong, Zichun; Pompoš, Arnold; Hrycushko, Brian; Albuquerque, Kevin; Gu, Xuejun

    2016-01-01

    GEC-ESTRO guidelines for high dose rate cervical brachytherapy advocate the reporting of the D2cc (the minimum dose received by the maximally exposed 2cc volume) to organs at risk. Due to large interfractional organ motion, reporting of accurate cumulative D2cc over a multifractional course is a non-trivial task requiring deformable image registration and deformable dose summation. To efficiently and accurately describe the point-to-point correspondence of the bladder wall over all treatment fractions while preserving local topologies, we propose a novel graphic processing unit (GPU)-based non-rigid point matching algorithm. This is achieved by introducing local anatomic information into the iterative update of correspondence matrix computation in the ‘thin plate splines-robust point matching’ (TPS-RPM) scheme. The performance of the GPU-based TPS-RPM with local topology preservation algorithm (TPS-RPM-LTP) was evaluated using four numerically simulated synthetic bladders having known deformations, a custom-made porcine bladder phantom embedded with twenty one fiducial markers, and 29 fractional computed tomography (CT) images from seven cervical cancer patients. Results show that TPS-RPM-LTP achieved excellent geometric accuracy with landmark residual distance error (RDE) of 0.7  ±  0.3 mm for the numerical synthetic data with different scales of bladder deformation and structure complexity, and 3.7  ±  1.8 mm and 1.6  ±  0.8 mm for the porcine bladder phantom with large and small deformation, respectively. The RDE accuracy of the urethral orifice landmarks in patient bladders was 3.7  ±  2.1 mm. When compared to the original TPS-RPM, the TPS-RPM-LTP improved landmark matching by reducing landmark RDE by 50  ±  19%, 37  ±  11% and 28  ±  11% for the synthetic, porcine phantom and the patient bladders, respectively. This was achieved with a computational time of less than 15 s in all cases

  4. A non-rigid point matching method with local topology preservation for accurate bladder dose summation in high dose rate cervical brachytherapy.

    Science.gov (United States)

    Chen, Haibin; Zhong, Zichun; Liao, Yuliang; Pompoš, Arnold; Hrycushko, Brian; Albuquerque, Kevin; Zhen, Xin; Zhou, Linghong; Gu, Xuejun

    2016-02-07

    GEC-ESTRO guidelines for high dose rate cervical brachytherapy advocate the reporting of the D2cc (the minimum dose received by the maximally exposed 2cc volume) to organs at risk. Due to large interfractional organ motion, reporting of accurate cumulative D2cc over a multifractional course is a non-trivial task requiring deformable image registration and deformable dose summation. To efficiently and accurately describe the point-to-point correspondence of the bladder wall over all treatment fractions while preserving local topologies, we propose a novel graphic processing unit (GPU)-based non-rigid point matching algorithm. This is achieved by introducing local anatomic information into the iterative update of correspondence matrix computation in the 'thin plate splines-robust point matching' (TPS-RPM) scheme. The performance of the GPU-based TPS-RPM with local topology preservation algorithm (TPS-RPM-LTP) was evaluated using four numerically simulated synthetic bladders having known deformations, a custom-made porcine bladder phantom embedded with twenty one fiducial markers, and 29 fractional computed tomography (CT) images from seven cervical cancer patients. Results show that TPS-RPM-LTP achieved excellent geometric accuracy with landmark residual distance error (RDE) of 0.7  ±  0.3 mm for the numerical synthetic data with different scales of bladder deformation and structure complexity, and 3.7  ±  1.8 mm and 1.6  ±  0.8 mm for the porcine bladder phantom with large and small deformation, respectively. The RDE accuracy of the urethral orifice landmarks in patient bladders was 3.7  ±  2.1 mm. When compared to the original TPS-RPM, the TPS-RPM-LTP improved landmark matching by reducing landmark RDE by 50  ±  19%, 37  ±  11% and 28  ±  11% for the synthetic, porcine phantom and the patient bladders, respectively. This was achieved with a computational time of less than 15 s in all cases

  5. Diamond Turning Of Infra-Red Components

    Science.gov (United States)

    Hodgson, B.; Lettington, A. H.; Stillwell, P. F. T. C.

    1986-05-01

    Single point diamond machining of infra-red optical components such as aluminium mirrors, germanium lenses and zinc sulphide domes is potentially the most cost effective method for their manufacture since components may be machined from the blanks to a high surface finish, requiring no subsequent polishing, in a few minutes. Machines for the production of flat surfaces are well established. Diamond turning lathes for curved surfaces however require a high capital investment which can be justified only for research purposes or high volume production. The present paper describes the development of a low cost production machine based on a Bryant Symons diamond turning lathe which is able to machine spherical components to the required form and finish. It employs two horizontal spindles one for the workpiece the other for the tool. The machined radius of curvature is set by the alignment of the axes and the radius of the tool motion, as in conventional generation. The diamond tool is always normal to the workpiece and does not need to be accurately profiled. There are two variants of this basic machine. For machining hemispherical domes the axes are at right angles while for lenses with positive or negative curvature these axes are adjustable. An aspherical machine is under development, based on the all mechanical spherical machine, but in which a ± 2 mm aspherecity may be imposed on the best fit sphere by moving the work spindle under numerical control.

  6. Diamond turning on advanced machine tool prototypes

    International Nuclear Information System (INIS)

    Arnold, J.B.; Steger, P.J.

    1975-01-01

    Specular-quality metal mirrors are being machined for use in laser optical systems. The fabrication process incorporates special quality diamond tools and specially constructed turning machines. The machines are controlled by advanced control techniques and are housed in an environmentally controlled laboratory to insure ultimate machine stability and positional accuracy. The materials from which these mirrors are primarily produced are the softer face-center-cubic structure metals, such as gold, silver, copper, and aluminum. Mirror manufacturing by the single-point diamond machining process is in an early stage of development, but it is anticipated that this method will become the most economical way for producing high-quality metal mirrors. (U.S.)

  7. MEDIACRACY TURNS INTO A SYNONYM OF MEDIOCRITY?

    Directory of Open Access Journals (Sweden)

    Valentina CHIPER

    2014-11-01

    Full Text Available The link between freedom of speech and democracy is based on ideological legitimacy report. A new phenomenon which is worth noticing is the conversion of the freedom of expression from a freedom seen in certain aspects as a solitary freedom into a communication of the masses. Another challenge is prompted by the change of the traditional communication system at the dawn of technology, Internet and its various applications, as well as of the channels used. A weak point is the change in the values scale. If a journalist or a book is deemed good or valuable in terms of competence and ideas, these values are now unfortunately inspired by what we watch on TV. In this train of thoughts, reliable opinion leaders are no longer the same. Mediacracy turns into a synonym of mediocrity with affectivity and emotion prevailing over reason and instead of the communication of thoughts and opinions.

  8. Turning nuclear communications inside out

    International Nuclear Information System (INIS)

    Besenyei, Elisabeth; Czibolya, Laszlo

    2002-01-01

    Due to debates on the security of energy supply in the European Union, the international efforts on the implementation of Kyoto protocol and the forthcoming liberalization of the electrical energy market the attention of Hungarian decision-makers was focused on energy related problems. Discussions started on the future role of nuclear power and anti-nuclear environmentalists became more active in their criticism. Changes were needed in the approach and practice of communication on nuclear energy. Previous practice turned to be inefficient in dialogue with different social and influential groups. Public information could not be considered any more as an activity explaining measures to cope with incidents and accidents or giving technical answers to mostly superficial statements on allegedly unsafe features and solutions in nuclear industry. It was time to change the paradigm and to turn the communication into a powerful tool to put forward the arguments, to show the achievements and facts and to explain the efforts in addressing public concerns. The new paradigm turned the previous outside-in approach to a new inside-out type of behavior. Instead of reacting to the attacks coming from outside the new approach means first of all commitment to be open and pro-active in communication and to act in close cooperation with all interested organizations and institutions. The three pillars of the new paradigm, commitment, communication and co-operation are applicable not only for the nuclear industry, but also for the governmental agencies (regulatory bodies, health and emergency authorities etc.) and for the wide range of technical, scientific and civil organizations. Public information should be turned from a burden to a challenge for open, technically valid and honest dialogue. This active communication approach is illustrated by some new initiatives in public information in Hungary. Following the successful Nuclear Academy for Journalists formed new Section of Nuclear

  9. 刘易斯“拐点”与我国初次分配格局--劳动力供给曲线对劳动报酬份额的影响%Lewis Turning Point and Pattern of Primary Distribution in China

    Institute of Scientific and Technical Information of China (English)

    杨瑞龙; 张泽华

    2014-01-01

    This paper , according to the expression of retained earnings in Lewis Turning Point , sets up a labor supply curve going upward to the right.In order to test the theory , the empirical study of this paper not only pres-ents the econometrics method of second order weighted difference to deal with the stock of capital , but also adds new variables to measure retained earnings and difference of labor.Robust return shows that capital of each labor and living cost have positive influence on labor ’ s share , but income gap among labor groups and the number of la-bor exert negative influence on it , which conforms to the anticipation of the model.At the same time , the analysis on welfare of the paper shows that whether the primary distribution is favorable to labor , we can not judge it only by labor’s share, which would lead to misunderstanding.%依据刘易斯“拐点”中对于保留收益的描述构建了一条向右上方倾斜的劳动力供给曲线。为了对新的理论进行验证,实证研究不仅提出了用以解决资本存量问题的二阶加权差分计量方法,还加入了用于衡量劳动力保留收益水平和差距的新变量。稳健的回归结果表明劳均资本、生活成本对劳动报酬份额存在正向影响,而劳动力群体内部收入差距以及劳动力数量对该份额存在负向影响,符合模型预期。与此同时,福利分析指出,对于初次分配是否有利于劳动者不能仅以劳动报酬份额为标准,否则会产生误判。

  10. Turning the appliance market around towards A++

    Energy Technology Data Exchange (ETDEWEB)

    Noergaard, Joergen S.; Guldbrandsen, Tom [Dept. of Civil Engineering, Technical Univ. of Denmark (Denmark); Brange, Birgitte; Karbo, Peter [Elsparefonden (Denmark)

    2007-07-01

    In an effort to exploit better the labelling schemes for appliances the Danish Electricity Saving Trust has run some campaigns on cold appliances. In 1999 focus was on getting people to choose A-rated models, the 2004 campaign focussed on A+, and in 2005 on A++. These campaigns and their results are described in the paper and some conclusions are drawn.The campaigns have consisted of various elements, namely 1) a general information about the campaigns, 2) a subsidy offered temporarily during some months to people buying the A, A+ and A++ models, 3) a website where people can easily find the most energy efficient model within their specification, and 4) in the website are also listed the shops, where consumers can get the appliances at lowest prices. The latter was the most innovative and maybe also the most effective measure in the package.Results showed up as a permanent U-turn of the market in the course of a few years. Where models C, D, E earlier dominated the market, the A, A+ and A++, came to dominate as the standard models in stock. Consequently, their prices dropped significantly. The theory of a rational market behavior is based on some assumptions, one being that full information is available to all actors. The website identifying to the consumers the shops with the lowest priced efficient models was a step in that direction, and the result did not fail to turn up.

  11. Night-time heart rate cut-off point definition by resting office tachycardia in untreated hypertensive patients: data of the Spanish ABPM registry.

    Science.gov (United States)

    Vinyoles, Ernest; de la Sierra, Alejandro; Roso, Albert; de la Cruz, Juan J; Gorostidi, Manuel; Segura, Julián; Banegas, José R; Martell-Claros, Nieves; Ruilope, Luís M

    2014-05-01

    Epidemiological studies have shown that an elevated resting heart rate (HR) is a risk factor for both total and cardiovascular mortality. Our aim was to estimate the night-time HR cut-off point that best predicts cardiovascular risk office tachycardia in hypertensive patients. Untreated hypertensive patients without concomitant cardiovascular diseases were included. Office and ambulatory HRs were measured. Cardiovascular risk office tachycardia was defined by office HR at least 85 beats per minute (bpm). Different night-time HR cut-offs were estimated by receiver operating characteristic curve analyses to predict cardiovascular risk office tachycardia. The best cut-off was selected on the basis of its combined sensitivity and specificity. A total of 32 569 hypertensive patients were included: 46.5% women, mean age (SD) 52 (14) years, office blood pressure 146 (16)/89 (11) mmHg, diabetes 10.3%, smoking 19.2%, BMI 29 (6.8) kg/m, office HR 77 (11.2) bpm, and night-time HR 64.9 (9.3) bpm. A total of 7070 (21.7%) patients were found to have cardiovascular risk office tachycardia. The night-time HR value that better predicted cardiovascular risk office tachycardia was more than 66 bpm. In comparison with patients with night HR below this value, those with night-time tachycardia were predominantly women, younger, with higher ambulatory blood pressure, greater BMI, and higher prevalence of diabetes and smoking. All comparisons were statistically significant (P less than 0.001). A mean night-time HR more than 66 bpm is a good predictor of cardiovascular risk office tachycardia in untreated hypertensive patients and could be considered a variable associated with an increased cardiovascular risk.

  12. Determination of moderate-to-severe postoperative pain on the numeric rating scale: a cut-off point analysis applying four different methods.

    Science.gov (United States)

    Gerbershagen, H J; Rothaug, J; Kalkman, C J; Meissner, W

    2011-10-01

    Cut-off points (CPs) of the numeric rating scale (NRS 0-10) are regularly used in postoperative pain treatment. However, there is insufficient evidence to identify the optimal CP between mild and moderate pain. A total of 435 patients undergoing general, trauma, or oral and maxillofacial surgery were studied. To determine the optimal CP for pain treatment, four approaches were used: first, patients estimated their tolerable postoperative pain intensity before operation; secondly, 24 h after surgery, they indicated if they would have preferred to receive more analgesics; thirdly, satisfaction with pain treatment was analysed, and fourthly, multivariate analysis was used to calculate the optimal CP for pain intensities in relation to pain-related interference with movement, breathing, sleep, and mood. The estimated tolerable postoperative pain before operation was median (range) NRS 4.0 (0-10). Patients who would have liked more analgesics reported significantly higher average pain since surgery [median NRS 5.0 (0-9)] compared with those without this request [NRS 3.0 (0-8)]. Patients satisfied with pain treatment reported an average pain intensity of median NRS 3.0 (0-8) compared with less satisfied patients with NRS 5.0 (2-9). Analysis of average postoperative pain in relation to pain-related interference with mood and activity indicated pain categories of NRS 0-2, mild; 3-4, moderate; and 5-10, severe pain. Three of the four methods identified a treatment threshold of average pain of NRS≥4. This was considered to identify patients with pain of moderate-to-severe intensity. This cut-off was indentified as the tolerable pain threshold.

  13. Notes on the Spatial Turn

    Directory of Open Access Journals (Sweden)

    Stipe Grgas

    2012-06-01

    Full Text Available On the basis of ever-mounting evidence, amongst which is the “zone” problematic of the Zadar conference that occassioned these notes, it can be concluded that the spatial turn has insinuated itself as an all-pervading heuristic tool throughout the humanities and the social sciences. The extent to which space and spatiality have usurped the central stage in the various branches of reasearch can be gauged by admonishments that what we are witnessing is a new fundamentalism that has simply inverted the terms of the dualism of time and space (May and Thrift 2001: “Introduction”. According to Michael Dear the sway of space is manifested in multifold ways: in the ubiquity of spatial analysis in social theories and practices; in the explosion of publications devoted to the exploration of the interface of the social and the spatial; in the reintegration of human geography into various domains of knowledge; in the focus given to difference and the consequent diversification of theoretical and empirical practices; in a theoretically informed exploration of the relation between geographical knowledge and social action; and, finally, in the unprecedented proliferation of research agendas and publications pertaining to these isuuses (Dear 2001: 24. Two recent collections of papers are indicative of the ubiquity of spatial issues in scholarly work.

  14. Support vector machines for prediction and analysis of beta and gamma-turns in proteins.

    Science.gov (United States)

    Pham, Tho Hoan; Satou, Kenji; Ho, Tu Bao

    2005-04-01

    Tight turns have long been recognized as one of the three important features of proteins, together with alpha-helix and beta-sheet. Tight turns play an important role in globular proteins from both the structural and functional points of view. More than 90% tight turns are beta-turns and most of the rest are gamma-turns. Analysis and prediction of beta-turns and gamma-turns is very useful for design of new molecules such as drugs, pesticides, and antigens. In this paper we investigated two aspects of applying support vector machine (SVM), a promising machine learning method for bioinformatics, to prediction and analysis of beta-turns and gamma-turns. First, we developed two SVM-based methods, called BTSVM and GTSVM, which predict beta-turns and gamma-turns in a protein from its sequence. When compared with other methods, BTSVM has a superior performance and GTSVM is competitive. Second, we used SVMs with a linear kernel to estimate the support of amino acids for the formation of beta-turns and gamma-turns depending on their position in a protein. Our analysis results are more comprehensive and easier to use than the previous results in designing turns in proteins.

  15. 32 CFR 636.23 - Turning movements.

    Science.gov (United States)

    2010-07-01

    ... Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL... movements. (a) U-turns are prohibited on all streets in the cantonment area. (b) Right-turns will be made from a position as close to the right edge or right curb of the roadway as possible. (c) Left-turns...

  16. Models and Algorithms for Tracking Target with Coordinated Turn Motion

    Directory of Open Access Journals (Sweden)

    Xianghui Yuan

    2014-01-01

    Full Text Available Tracking target with coordinated turn (CT motion is highly dependent on the models and algorithms. First, the widely used models are compared in this paper—coordinated turn (CT model with known turn rate, augmented coordinated turn (ACT model with Cartesian velocity, ACT model with polar velocity, CT model using a kinematic constraint, and maneuver centered circular motion model. Then, in the single model tracking framework, the tracking algorithms for the last four models are compared and the suggestions on the choice of models for different practical target tracking problems are given. Finally, in the multiple models (MM framework, the algorithm based on expectation maximization (EM algorithm is derived, including both the batch form and the recursive form. Compared with the widely used interacting multiple model (IMM algorithm, the EM algorithm shows its effectiveness.

  17. Study of positional dependence of dose to bladder, pelvic wall and rectal points in High-Dose-Rate Brachytherapy in cervical cancer patients

    International Nuclear Information System (INIS)

    Talluri, Anil Kumar; Alluri, Krishnam Raju; Gudipudi, Deleep Kumar; Ahamed, Shabbir; Sresty, Madhusudhana M.; Reddy, Aparna Yarrama

    2013-01-01

    The objective of the study is to examine the variation in doses to, Bladder, pelvic wall and Rectal Points when a patient is simulated in Supine (S Position) and Lithotomy M shaped positions (LM Position), respectively as part of Intracavitary Brachytherapy in Cervical Cancer patients. Patients (n = 19) were simulated and orthogonal images were taken in S Position and LM Positions on a physical simulator. Digital orthogonal X-ray images were transferred to Brachyvision Treatment Planning System via Dicom to generate treatment plans. Radio opaque dye of 7 ml was injected into the Foley bulb for identification and digitization of International Commission on Radiological Units and Measurements (ICRU) Bladder point. Pelvic side wall points were marked in accordance with ICRU 38 recommendations. A Rectal tube containing dummy source marker wire was used to identify Rectal Point. Students' t-test was used to analyze the results. Doses in LM Position were lower and statistically significant when compared to S Position for ICRU Bladder Point, pelvic walls and Rectal Point. It was observed that movement of applicator could be the reason for the variations in doses between the two positions. Bladder, pelvic wall and rectal points systematically registered lower doses in LM Position as compared to S Position. (author)

  18. Comparative evaluation of SUV, tumor-to-blood standard uptake ratio (SUR), and dual time point measurements for assessment of the metabolic uptake rate in FDG PET.

    Science.gov (United States)

    Hofheinz, Frank; Hoff, Jörg van den; Steffen, Ingo G; Lougovski, Alexandr; Ego, Kilian; Amthauer, Holger; Apostolova, Ivayla

    2016-12-01

    We have demonstrated recently that the tumor-to-blood standard uptake ratio (SUR) is superior to tumor standardized uptake value (SUV) as a surrogate of the metabolic uptake rate K m of fluorodeoxyglucose (FDG), overcoming several of the known shortcomings of the SUV approach: excellent linear correlation of SUR and K m from Patlak analysis was found using dynamic imaging of liver metastases. However, due to the perfectly standardized uptake period used for SUR determination and the comparatively short uptake period, these results are not automatically valid and applicable for clinical whole-body examinations in which the uptake periods (T) are distinctly longer and can vary considerably. Therefore, the aim of this work was to investigate the correlation between SUR derived from clinical static whole-body scans and K m-surrogate derived from dual time point (DTP) measurements. DTP (18)F-FDG PET/CT was performed in 90 consecutive patients with histologically proven non-small cell lung cancer (NSCLC). In the PET images, the primary tumor was delineated with an adaptive threshold method. For determination of the blood SUV, an aorta region of interest (ROI) was delineated manually in the attenuation CT and transferred to the PET image. Blood SUV was computed as the mean value of the aorta ROI. SUR values were computed as ratio of tumor SUV and blood SUV. SUR values from the early time point of each DTP measurement were scan time corrected to 75 min postinjection (SURtc). As surrogate of K m, we used the SUR(T) slope, K slope, derived from DTP measurements since it is proportional to the latter under the given circumstances. The correlation of SUV and SURtc with K slope was investigated. The prognostic value of SUV, SURtc, and K slope for overall survival (OS) and progression-free survival (PFS) was investigated with univariate Cox regression in a homogeneous subgroup (N=31) treated with primary chemoradiation. Correlation analysis revealed for both, SUV and SURtc, a

  19. Comparative study of reference points by dosimetric analyses for late complications after uniform external radiotherapy and high-dose-rate brachytherapy for cervical cancer

    International Nuclear Information System (INIS)

    Chen, S.-W.; Liang, J.-A.; Yeh, L.-S.; Yang, S.-N.; Shiau, A.-C.; Lin, F.-J.

    2004-01-01

    Purpose: This study aimed to correlate and compare the predictive values of rectal and bladder reference doses of uniform external beam radiotherapy without shielding and high-dose-rate intracavitary brachytherapy (HDRICB) with late sequelae in patients with uterine cervical cancer. Methods and materials: Between September 1992 and December 1998, 154 patients who survived more than 12 months after treatment were studied. Initially, they were treated with 10-MV X-rays (44 to 45 Gy/22 to 25 fractions over 4 to 5 weeks) to the whole pelvis, after which HDRICB was performed using 192 Ir remote afterloading at 1-week intervals for 4 weeks. The standard prescribed dose for each HDRICB was 6.0 Gy to point A. Patient- and treatment-related-factors were evaluated for late rectal complications using logistic regression modeling. Results: The probability of rectal complications showed better correlation of dose-response with increasing total ICRU (International Committee on Radiotherapy Units and Measurements) rectal dose. Multivariate logistic regression demonstrated a high risk of late rectal sequelae in patients who developed rectal complications (p 0.0001;relative risk, 15.06;95% CI, 2.89∼43.7) and total ICRU rectal dose greater than 16 Gy (p = 0.02;relative risk, 2.07;95% CI, 1.13∼4.55). The high risk factors for bladder complications were seen in patients who developed rectal complications (p = 0.0001;relative risk, 15.2;95% CI, 2.81∼44.9) and total ICRU bladder dose greater than 24 Gy (p = 0.02;relative risk, 8.93;95% CI, 1.79∼33.1). Conclusion: This study demonstrated the predictive value of ICRU rectal and bladder reference dosing in HDRICB for patients receiving uniform external beam radiation therapy without central shielding. Patients who had a total ICRU rectal dose greater than 16 Gy, or a total ICRU bladder dose over 24 Gy, were at risk of late sequelae

  20. Congress turns cold on fusion

    International Nuclear Information System (INIS)

    Marshall, E.

    1984-01-01

    A 5% cut in fusion research budgets will force some programs to be dropped in order to keep the large machinery running unless US and European scientists collaborate instead of competing. Legislators became uneasy about the escalating costs of the new devices. The 1984 budget of $470 million for magnetic fusion research is only half the projected cost of the Tokomak Fusion Core Experiment (TFCX) planned to ignite, for the first time, a self-sustaining burn. Planning for the TCFX continued despite the message from Congress. Work at the large institutions at Princeton, MIT, etc. may survive at the expense of other programs, some of which will lose academic programs as well. Scientists point to the loss of new ideas and approaches when projects are cancelled. Enthusiasm is growing for international collaboration

  1. Evaluation of the dose uniformity for double-plane high dose rate interstitial breast implants with the use of dose reference points and dose non-uniformity ratio

    International Nuclear Information System (INIS)

    MAjor, T.; Polgar, C.; Somogyi, A.; Nemeth, G.

    2000-01-01

    This study investigated the influence of dwell time optimizations on dose uniformity characterized by dose values in dose points and dose non-uniformity ratio (DNR) and analyzed which implant parameters have influence on the DNR. Double-plane breast implants with catheters arranged in triangular pattern were used for the calculations. At a typical breast implant, dose values in dose reference points inside the target volume and volumes enclosed by given isodose surfaces were calculated and compared for non-optimized and optimized implants. The same 6-cm treatment length was used for the comparisons. Using different optimizations plots of dose non-uniformity ratio as a function of catheter separation, source step size, number of catheters, length of active sections were drawn and the minimum DNR values were determined. Optimization resulted in less variation in dose values over dose points through the whole volume and in the central plane only compared to the non-optimized case. At implant configurations consisting of seven catheters with 15-mm separation, 5-mm source step size and various active lengths adapted according to the type of optimization, the no optimization, geometrical (volume mode) and dose point (on dose points and geometry) optimization resulted in similar treatment volumes, but an increased high dose volume was observed due to the optimization. The dose non-uniformity ratio always had the minimum at average dose over dose normalization points, defined in the midpoints between the catheters through the implant volume. The minimum value of DNR depended on catheter separation, source step size, active length and number of catheters. The optimization had only a small influence on DNR. In addition to the reference points in the central plane only, dose points positioned in the whole implant volume can be used for evaluating the dose uniformity of interstitial implants. The dose optimization increases not only the dose uniformity within the implant but

  2. Effect of stern hull shape on turning circle of ships

    Science.gov (United States)

    Jaswar, Maimun, A.; Wahid, M. A.; Priyanto, A.; Zamani, Pauzi, Saman

    2012-06-01

    Many factors such as: stern hull shape, length, draught, trim, propulsion system and external forces affecting the drift angle influence rate of turn and size of turning circle of ships. This paper discusses turning circle characteristics of U and V stern hull shape of Very Large Crude Oil Carrier (VLCC) ships. The ships have same principal dimension such as length, beam, and draught. The turning circle characteristics of the VLCC ships are simulated at 35 degree of rudder angle. In the analysis, firstly, turning circle performance of U-type VLCC ship is simulated. In the simulation, initial ship speed is determined using given power and rpm. Hydrodynamic derivatives coefficients are determined by including effect of fullness of aft run. Using the obtained, speed and hydrodynamic coefficients, force and moment acting on hull, force and moment induced by propeller, force and moment induced by rudder are determined. Finally, ship trajectory, ratio of speed, yaw angle and drift angle are determined. Results of simulation results of the VLCC ship are compared with the experimental one as validation. Using the same method, V-type VLCC is simulated and the simulation results are compared with U-type VLCC ship. Results shows the turning circle of U-type is larger than V-type due to effect stern hul results of simulation are.

  3. The Bulletin turns the page

    CERN Multimedia

    2006-01-01

    Today, the paper version of the CERN Bulletin has a new look, the first since the 1970s. The new layout, which has been designed to improve readability, is part of an ongoing effort to improve internal communication at CERN. The Bulletin is the Organization's main tool for communication with the CERN community. It keeps everyone abreast of information that is important and essential for our working life at CERN. It plays an important role in keeping us up to date with social and scientific developments at the Laboratory. And it should be a force for cohesion across this very diverse organization. At the same time, the distribution for the printed Bulletin is being changed from individual mailboxes to distribution points around the Laboratory. This reflects changing reading habits, with the on-line version gaining a steadily increasing readership. For some time now, the paper Bulletin has been published fortnightly. However, the on-line version is updated weekly, so I encourage you all to look at it. In addi...

  4. Vantage point.

    Science.gov (United States)

    Kay, Jenny

    2004-06-01

    'Management by expletives' sums up the new Channel 4 programme, Ramsay's Kitchen Nightmares, in which TV chef Gordon Ramsay attempts to turn around a series of failing kitchens. 'It's your f***ing kitchen,' Ramsay tells one hapless head chef, 'F***ing organise it.'

  5. Realistic page-turning of electronic books

    Science.gov (United States)

    Fan, Chaoran; Li, Haisheng; Bai, Yannan

    2014-01-01

    The booming electronic books (e-books), as an extension to the paper book, are popular with readers. Recently, many efforts are put into the realistic page-turning simulation o f e-book to improve its reading experience. This paper presents a new 3D page-turning simulation approach, which employs piecewise time-dependent cylindrical surfaces to describe the turning page and constructs smooth transition method between time-dependent cylinders. The page-turning animation is produced by sequentially mapping the turning page into the cylinders with different radii and positions. Compared to the previous approaches, our method is able to imitate various effects efficiently and obtains more natural animation of turning page.

  6. Tipping Point

    Medline Plus

    Full Text Available ... en español Blog About OnSafety CPSC Stands for Safety The Tipping Point Home > 60 Seconds of Safety (Videos) > The Tipping Point The Tipping Point by ... danger death electrical fall furniture head injury product safety television tipover tv Watch the video in Adobe ...

  7. Egg turning behavior and incubation temperature in Forster’s terns in relation to mercury contamination

    Science.gov (United States)

    Taylor, Gregory T.; Ackerman, Joshua T.; Shaffer, Scott A.

    2018-01-01

    Egg turning behavior is an important determinant of egg hatchability, but it remains relatively understudied. Here, we examined egg turning rates and egg temperatures in Forster’s terns (Sterna forsteri). We used artificial eggs containing a data logger with a 3-D accelerometer, a magnetometer, and a temperature thermistor to monitor parental incubation behavior of 131 tern nests. Overall, adults turned their eggs an average (±SD) of 3.8 ± 0.8 turns h-1, which is nearly two times higher than that of other seabirds. Egg turning rates increased with nest initiation date. We also examined egg turning rates and egg temperatures in relation to egg mercury contamination. Mercury contamination has been shown to be associated with reduced egg hatchability, and we hypothesized that mercury may decrease egg hatchability via altered egg turning behavior by parents. Despite the high variability in egg turning rates among individuals, the rate of egg turning was not related to mercury concentrations in sibling eggs. These findings highlight the need for further study concerning the potential determinants of egg turning behavior.

  8. When Bad Masks Turn Good

    Science.gov (United States)

    Abraham, Roberto G.

    In keeping with the spirit of a meeting on ‘masks,' this talk presents two short stories on the theme of dust. In the first, dust plays the familiar role of the evil obscurer, the enemy to bedefeated by the cunning observer in order to allow a key future technology (adaptive optics) to be exploited fully by heroic astronomers. In the second story, dust itself emerges as the improbable hero, in the form of a circumstellar debris disks. I will present evidence of a puzzling near-infrared excess in the continuum of high-redshift galaxies and will argue that the seemingly improbable origin of this IR excess is a population of young circumstellar disks formed around high-mass stars in distant galaxies. Assuming circumstellar disks extend down to lower masses,as they do in our own Galaxy, the excess emission presents us with an exciting opportunity to measure the formation rate of planetary systems in distant galaxies at cosmic epochs before our own solar system formed.

  9. Address Points, Address points were attributed according to NENA standards and field verfied between the dates of June 2008 thru August 2008. The address points were then matched to the Verizon Telco database with a 99% hit rate in October of 2008., Published in 2006, 1:1200 (1in=100ft) scale, Eastern Shore Regional GIS Cooperative.

    Data.gov (United States)

    NSGIC Regional | GIS Inventory — Address Points dataset current as of 2006. Address points were attributed according to NENA standards and field verfied between the dates of June 2008 thru August...

  10. Analyses of quenching process during turn-off of plasma electrolytic carburizing on carbon steel

    International Nuclear Information System (INIS)

    Wu, Jie; Liu, Run; Xue, Wenbin; Wang, Bin; Jin, Xiaoyue; Du, Jiancheng

    2014-01-01

    Highlights: • Cooling rate of carburized steel at the end of PEC treatment is measured. • The quench hardening in the fast or slow turn-off mode hardly takes place. • Decrease of the surface roughness during slow turn-off process is found. • A slow turn-off mode is recommended to replace the conventional turn-off mode. - Abstract: Plasma electrolytic carburizing (PEC) under different turn-off modes was employed to fabricate a hardening layer on carbon steel in glycerol solution without stirring at 380 V for 3 min. The quenching process in fast turn-off mode or slow turn-off mode of power supply was discussed. The temperature in the interior of steel and electron temperature in plasma discharge envelope during the quenching process were evaluated. It was found that the cooling rates of PEC samples in both turn-off modes were below 20 °C/s, because the vapor film boiling around the steel sample reduced the cooling rate greatly in terms of Leidenfrost effect. Thus the quench hardening hardly took place, though the slow turn-off mode slightly decreased the surface roughness of PEC steel. At the end of PEC treatment, the fast turn-off mode used widely at present cannot enhance the surface hardness by quench hardening, and the slow turn-off mode was recommended in order to protect the electronic devices against a large current surge

  11. performance characteristics of a cam turning attachment

    African Journals Online (AJOL)

    Dr Obe

    ABSTRACT. A modification of a cylindrical turning unit has been done to give a non- cylindrical turning attachment for production of irregular shapes, like cams on the lathe machine. To assess the performance of the attachment, cutting forces have been measured using a 'Sigma' Cutting Tool. Dynamometer. Furthermore ...

  12. Cut-Off Points for Mild, Moderate, and Severe Pain on the Numeric Rating Scale for Pain in Patients with Chronic Musculoskeletal Pain: Variability and Influence of Sex and Catastrophizing

    NARCIS (Netherlands)

    Boonstra, A.M.; Stewart, R.; Koke, A.J.A.; Oosterwijk, R.F.A.; Swaan, J.L.; Schreurs, Karlein Maria Gertrudis; Schiphorst Preuper, H.R.

    2016-01-01

    Objectives: The 0–10 Numeric Rating Scale (NRS) is often used in pain management. The aims of our study were to determine the cut-off points for mild, moderate, and severe pain in terms of pain-related interference with functioning in patients with chronic musculoskeletal pain, to measure the

  13. Cut-Off Points for Mild, Moderate, and Severe Pain on the Numeric Rating Scale for Pain in Patients with Chronic Musculoskeletal Pain : Variability and Influence of Sex and Catastrophizing

    NARCIS (Netherlands)

    Boonstra, Anne M; Stewart, Roy E; Köke, Albère J A; Oosterwijk, René F A; Swaan, Jeannette L; Schreurs, Karlein M G; Schiphorst Preuper, Henrica R

    2016-01-01

    Objectives: The 0-10 Numeric Rating Scale (NRS) is often used in pain management. The aims of our study were to determine the cut-off points for mild, moderate, and severe pain in terms of pain-related interference with functioning in patients with chronic musculoskeletal pain, to measure the

  14. Diseases that turn African hair silky.

    Science.gov (United States)

    Ajose, Frances O A

    2012-11-01

    African hair in its natural state poses tenacious grooming challenges; consequently a large portion of the African cosmetic industry is focused on means to relax the tight curls of African hair to make the hair more manageable. In malnourished and hypoproteinemic states, African hair straightens in an uncomplimentary manner. Recently, we observed that in certain diseases African hair changes to a desirable silky wavy texture. To identify the diseases that turn African hair silky and their parameters we examined 5612 dermatology patients at a tertiary hospital in Nigeria. We then studied the clinical and basic laboratory parameters of those patients whose diseases were accompanied by the silky hair change. Silky hair change similar to the hair of the African neonatal child was observed in five diseases, namely AIDS, rheumatoid arthritis, systemic lupus erythematosus, pulmonary tuberculosis with cachexia, and Behçet's disease. Our study identified retrogression of African hair to the neonatal structure in five diseases. Anemia of chronic illness, high erythrocyte sedimentation rate, and mild hypocalcemia were significant laboratory parameters. This is an important observation, which should excite and advance research into the nature and structure of African hair. The causes of structural hair changes should include these five diseases. © 2012 The International Society of Dermatology.

  15. Vehicle kinematics in turns and the role of cornering lamps in driver vision.

    Science.gov (United States)

    2010-11-01

    "SAE Recommended Practice J852 and ECE Regulations 119 and 48 for cornering lamps : were compared. Photometric points described in each specification were then compared : to naturalistic low-speed turn trajectories produced by 87 drivers. Future loca...

  16. The Third Turn toward the Social: Nancy Welch's "Living Room," Tony Scott's "Dangerous Writing," and Rhetoric and Composition's Turn toward Grassroots Political Activism

    Science.gov (United States)

    Kinney, Kelly; Girshin, Thomas; Bowlin, Barrett

    2013-01-01

    This review essay examines recent texts by Nancy Welch and Tony Scott, both of which use embodied activism as a starting point for their inquiries. Taken together, these works point to a distinct shift in composition studies' turn toward the social, one that calls on workers both within and outside the academy to actively engage in grassroots…

  17. Fixed Points

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 5. Fixed Points - From Russia with Love - A Primer of Fixed Point Theory. A K Vijaykumar. Book Review Volume 5 Issue 5 May 2000 pp 101-102. Fulltext. Click here to view fulltext PDF. Permanent link:

  18. Tipping Point

    Medline Plus

    Full Text Available ... OnSafety CPSC Stands for Safety The Tipping Point Home > 60 Seconds of Safety (Videos) > The Tipping Point ... 24 hours a day. For young children whose home is a playground, it’s the best way to ...

  19. Tipping Point

    Medline Plus

    Full Text Available ... 60 Seconds of Safety (Videos) > The Tipping Point The Tipping Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head injury product safety television tipover tv Watch the video in Adobe Flash ...

  20. METHODICAL MODEL FOR TEACHING BASIC SKI TURN

    Directory of Open Access Journals (Sweden)

    Danijela Kuna

    2013-07-01

    Full Text Available With the aim of forming an expert model of the most important operators for basic ski turn teaching in ski schools, an experiment was conducted on a sample of 20 ski experts from different countries (Croatia, Bosnia and Herzegovina and Slovenia. From the group of the most commonly used operators for teaching basic ski turn the experts picked the 6 most important: uphill turn and jumping into snowplough, basic turn with hand sideways, basic turn with clapping, ski poles in front, ski poles on neck, uphill turn with active ski guiding. Afterwards, ranking and selection of the most efficient operators was carried out. Due to the set aim of research, a Chi square test was used, as well as the differences between frequencies of chosen operators, differences between values of the most important operators and differences between experts due to their nationality. Statistically significant differences were noticed between frequencies of chosen operators (c2= 24.61; p=0.01, while differences between values of the most important operators were not obvious (c2= 1.94; p=0.91. Meanwhile, the differences between experts concerning thier nationality were only noticeable in the expert evaluation of ski poles on neck operator (c2=7.83; p=0.02. Results of current research are reflected in obtaining useful information about methodological priciples of learning basic ski turn organization in ski schools.

  1. Polarization (ellipsometric) measurements of liquid condensate deposition and evaporation rates and dew points in flowing salt/ash-containing combustion gases

    Science.gov (United States)

    Seshadri, K.; Rosner, D. E.

    1985-01-01

    An application of an optical polarization technique in a combustion environment is demonstrated by following, in real-time, growth rates of boric oxide condensate on heated platinum ribbons exposed to seeded propane-air combustion gases. The results obtained agree with the results of earlier interference measurements and also with theoretical chemical vapor deposition predictions. In comparison with the interference method, the polarization technique places less stringent requirements on surface quality, which may justify the added optical components needed for such measurements.

  2. Pharmacometric Analysis of the Relationship Between Absolute Lymphocyte Count and Expanded Disability Status Scale and Relapse Rate, Efficacy End Points, in Multiple Sclerosis Trials.

    Science.gov (United States)

    Novakovic, A M; Thorsted, A; Schindler, E; Jönsson, S; Munafo, A; Karlsson, M O

    2018-05-10

    The aim of this work was to assess the relationship between the absolute lymphocyte count (ALC), and disability (as measured by the Expanded Disability Status Scale [EDSS]) and occurrence of relapses, 2 efficacy endpoints, respectively, in patients with remitting-relasping multiple sclerosis. Data for ALC, EDSS, and relapse rate were available from 1319 patients receiving placebo and/or cladribine tablets. Pharmacodynamic models were developed to characterize the time course of the endpoints. ALC-related measures were then evaluated as predictors of the efficacy endpoints. EDSS data were best fitted by a model where the logit-linear disease progression is affected by the dynamics of ALC change from baseline. Relapse rate data were best described by the Weibull hazard function, and the ALC change from baseline was also found to be a significant predictor of time to relapse. Presented models have shown that once cladribine exposure driven ALC-derived measures are included in the model, the need for drug effect components is of less importance (EDSS) or disappears (relapse rate). This simplifies the models and theoretically makes them mechanism specific rather than drug specific. Having a reliable mechanism-specific model would allow leveraging historical data across compounds, to support decision making in drug development and possibly shorten the time to market. © 2018, The American College of Clinical Pharmacology.

  3. Turning university professors into competent learners

    NARCIS (Netherlands)

    Stefanova, Eliza; Ilieva, Miroslava; Nikolova, Nikolina; Stefanov, Krassen

    2008-01-01

    Stefanova, E., Ilieva, M., Nikolova, N, & Stefanov, K. (2008). Turning university professors into competent learners. In H. W. Sligte & R. Koper (Eds.), Proceedings of the 4th TENCompetence Open Workshop. Empowering Learners for Lifelong Competence Development: pedagogical, organisational and

  4. Turning Technology into Business Using University Patents

    NARCIS (Netherlands)

    Hartmann, L.

    2014-01-01

    We present an education paradigm that stimulates innovation and entrepreneurship through a master's-level university course: "Turning Technology into Business". The course was specifically designed to connect technological research with education using patented technologies developed at the research

  5. Cellular Reprogramming–Turning the Clock Back

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 18; Issue 6. Cellular Reprogramming - Turning the Clock Back - Nobel Prize in Physiology or Medicine, 2012. Deepa Subramanyam. General Article Volume 18 Issue 6 June 2013 pp 514-521 ...

  6. Point of care experience with pneumococcal and influenza vaccine documentation among persons aged ≥65 years: high refusal rates and missing information.

    Science.gov (United States)

    Brownfield, Elisha; Marsden, Justin E; Iverson, Patty J; Zhao, Yumin; Mauldin, Patrick D; Moran, William P

    2012-09-01

    Missed opportunities to vaccinate and refusal of vaccine by patients have hindered the achievement of national health care goals. The meaningful use of electronic medical records should improve vaccination rates, but few studies have examined the content of these records. In our vaccine intervention program using an electronic record with physician prompts, paper prompts, and nursing standing orders, we were unable to achieve national vaccine goals, due in large part to missing information and patient refusal. Copyright © 2012 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Mosby, Inc. All rights reserved.

  7. Dew Point

    OpenAIRE

    Goldsmith, Shelly

    1999-01-01

    Dew Point was a solo exhibition originating at PriceWaterhouseCoopers Headquarters Gallery, London, UK and toured to the Centre de Documentacio i Museu Textil, Terrassa, Spain and Gallery Aoyama, Tokyo, Japan.

  8. Tipping Point

    Medline Plus

    Full Text Available ... Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head injury product safety television tipover tv Watch the video in Adobe Flash ...

  9. Tipping Point

    Science.gov (United States)

    ... Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head injury product safety television tipover tv Watch the video in Adobe Flash ...

  10. Tipping Point

    Medline Plus

    Full Text Available ... Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head ... see news reports about horrible accidents involving young children and furniture, appliance and tv tip-overs. The ...

  11. Tipping Point

    Medline Plus

    Full Text Available ... Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture head ... TV falls with about the same force as child falling from the third story of a building. ...

  12. Tipping Point

    Medline Plus

    Full Text Available ... Tipping Point by CPSC Blogger September 22, 2009 appliance child Childproofing CPSC danger death electrical fall furniture ... about horrible accidents involving young children and furniture, appliance and tv tip-overs. The force of a ...

  13. Derrida’s Turn to Franciscan Philosophy

    Directory of Open Access Journals (Sweden)

    Marko Zlomislic

    2008-12-01

    Full Text Available Contemporary French philosophers such as Levinas, Bataille, and Derrida, along with the existentialists Kierkegaard and Nietzsche have all made use of Franciscan insights in order to safeguard the ipseity that cannot be reduced or totalized. In keeping with the taste that concerns me, this paper will examine Derrida’s turn to the poetry of Gerard Manley Hopkins and how such a turn may place Derrida within a catholic and Franciscan tradition.

  14. Calculation of radiation dose rate above water layer of Interim Spent Fuel Storage Jaslovske Bohunice by the point Kernels (VISIPLAN) and Monte Carlo (MCNP4C) methods

    International Nuclear Information System (INIS)

    Slavik, O.; Kucharova, D.; Listjak, M.; Fueloep, M.

    2008-01-01

    The aim of this paper is to evaluate maximal dose rate (DR) of gamma radiation above different configurations of reservoirs with spent nuclear fuel with cooling period 1.8 year and to compare by buildup factor method (Visiplan) and Monte Carlo simulations and to appreciate influence of scattered photons in the case of calculation of fully filled fuel transfer storage (FTS). On the ground of performed accounts it was shown, that relative contributions of photons from adjacent reservoirs are in the case buildup factor method (Visiplan) similar to Monte Carlo simulations. It means, that Visiplan can be used also for valuation of contributions of of dose rates from neighbouring reservoirs. It was shown, that calculations of DR by Visiplan are conservatively overestimated for this source of radiation and thickness of shielding approximately 2.6 - 3 times. Also following these calculations resulted, that by storage of reservoirs with cooling period 1.8 years in FTS is not needed any additional protection measures for workers against primal safety report. Calculated DR also above fully filled FTS by these reservoirs in Jaslovske Bohunice is very low on the level 0.03 μSv/h. (authors)

  15. Calculation of radiation dose rate above water layer of Interim Spent Fuel Storage Jaslovske Bohunice by the point Kernels (VISIPLAN) and Monte Carlo (MCNP4C) methods

    International Nuclear Information System (INIS)

    Slavik, O.; Kucharova, D.; Listjak, M.; Fueloep, M.

    2009-01-01

    The aim of this paper is to evaluate maximal dose rate (DR) of gamma radiation above different configurations of reservoirs with spent nuclear fuel with cooling period 1.8 year and to compare by buildup factor method (Visiplan) and Monte Carlo simulations and to appreciate influence of scattered photons in the case of calculation of fully filled fuel transfer storage (FTS). On the ground of performed accounts it was shown, that relative contributions of photons from adjacent reservoirs are in the case buildup factor method (Visiplan) similar to Monte Carlo simulations. It means, that Visiplan can be used also for valuation of contributions of of dose rates from neighbouring reservoirs. It was shown, that calculations of DR by Visiplan are conservatively overestimated for this source of radiation and thickness of shielding approximately 2.6 - 3 times. Also following these calculations resulted, that by storage of reservoirs with cooling period 1.8 years in FTS is not needed any additional protection measures for workers against primal safety report. Calculated DR also above fully filled FTS by these reservoirs in Jaslovske Bohunice is very low on the level 0.03 μSv/h. (authors)

  16. A proposed residual stress model for oblique turning

    International Nuclear Information System (INIS)

    Elkhabeery, M. M.

    2001-01-01

    A proposed mathematical model is presented for predicting the residual stresses caused by turning. Effects of change in tool free length, cutting speed, feed rate, and the tensile strength of work piece material on the maximum residual stress are investigated. The residual stress distribution in the surface region due to turning under unlubricated condition is determined using a deflection etching technique. To reduce the number of experiments required and build the mathematical model for these variables, Response Surface Methodology (RSM) is used. In addition, variance analysis and an experimental check are conducted to determine the prominent parameters and the adequacy of the model. The results show that the tensile stress of the work piece material, cutting speed, and feed rate have significant effects on the maximum residual stresses. The proposed model, that offering good correlation between the experimental and predicted results, is useful in selecting suitable cutting parameters for the machining of different materials. (author)

  17. Variation in the annual unsatisfactory rates of selected pathogens and indicators in ready-to-eat food sampled from the point of sale or service in Wales, United Kingdom.

    Science.gov (United States)

    Meldrum, R J; Garside, J; Mannion, P; Charles, D; Ellis, P

    2012-12-01

    The Welsh Food Microbiological Forum "shopping basket" survey is a long running, structured surveillance program examining ready-to-eat food randomly sampled from the point of sale or service in Wales, United Kingdom. The annual unsatisfactory rates for selected indicators and pathogens for 1998 through 2008 were examined. All the annual unsatisfactory rates for the selected pathogens were <0.5%, and no pattern with the annual rate was observed. There was also no discernible trend observed for the annual rates of Listeria spp. (not moncytogenes), with all rates <0.5%. However, there was a trend observed for Esherichia coli, with a decrease in rate between 1998 and 2003, rapid in the first few years, and then a gradual increase in rate up to 2008. It was concluded that there was no discernible pattern to the annual unsatisfactory rates for Listeria spp. (not monocytogenes), L. monocytogenes, Staphylococcus aureus, and Bacillus cereus, but that a definite trend had been observed for E. coli.

  18. Prediction and analysis of beta-turns in proteins by support vector machine.

    Science.gov (United States)

    Pham, Tho Hoan; Satou, Kenji; Ho, Tu Bao

    2003-01-01

    Tight turn has long been recognized as one of the three important features of proteins after the alpha-helix and beta-sheet. Tight turns play an important role in globular proteins from both the structural and functional points of view. More than 90% tight turns are beta-turns. Analysis and prediction of beta-turns in particular and tight turns in general are very useful for the design of new molecules such as drugs, pesticides, and antigens. In this paper, we introduce a support vector machine (SVM) approach to prediction and analysis of beta-turns. We have investigated two aspects of applying SVM to the prediction and analysis of beta-turns. First, we developed a new SVM method, called BTSVM, which predicts beta-turns of a protein from its sequence. The prediction results on the dataset of 426 non-homologous protein chains by sevenfold cross-validation technique showed that our method is superior to the other previous methods. Second, we analyzed how amino acid positions support (or prevent) the formation of beta-turns based on the "multivariable" classification model of a linear SVM. This model is more general than the other ones of previous statistical methods. Our analysis results are more comprehensive and easier to use than previously published analysis results.

  19. Fuzzy Linguistic Optimization on Surface Roughness for CNC Turning

    OpenAIRE

    Lan, Tian-Syung

    2010-01-01

    Surface roughness is often considered the main purpose in contemporary computer numerical controlled (CNC) machining industry. Most existing optimization researches for CNC finish turning were either accomplished within certain manufacturing circumstances or achieved through numerous equipment operations. Therefore, a general deduction optimization scheme is deemed to be necessary for the industry. In this paper, the cutting depth, feed rate, speed, and tool nose runoff with low, medium, and...

  20. $\\beta$- decay of the N=Z, rp-process waiting points: $^{64}$Ge, $^{68}$Se and the N=Z+2: $^{66}$Ge, $^{70}$Se for accurate stellar weak-decay rates

    CERN Multimedia

    The contribution of electron capture to weak-decay rates has been neglected in model calculations of Type I X-ray bursts so far. Nucleosynthesis in these astrophysical events eventually proceeds through the rp-process near the proton drip-line. In particular, several N=Z nuclei such as $^{64}$Ge and $^{68}$Se act as waiting points in the nuclear flow due to the low S${_P}$ values of their Z+1 neighbours. Recent theoretical calculations have shown that, in these high density ($\\thicksim10^{6}$ g/cm$^3$) and high temperature (1 - 2 GK) scenarios, continuum electron capture rates might play an important role, in particular for species at and around these waiting point nuclei. This proposal is aimed at the study of the $\\beta^{+}$/EC-decay of the waiting point nuclei $^{64}$Ge, $^{68}$Se and their N=Z+2 second neighbours $^{66}$Ge and $^{70}$Se with the Total Absorption Spectroscopy method. This will allow for a detailed analysis of their contribution to the EC-decay rates in X-Ray burst explosions. The proposed ...

  1. Precision lens assembly with alignment turning system

    Science.gov (United States)

    Ho, Cheng-Fang; Huang, Chien-Yao; Lin, Yi-Hao; Kuo, Hui-Jean; Kuo, Ching-Hsiang; Hsu, Wei-Yao; Chen, Fong-Zhi

    2017-10-01

    The poker chip assembly with high precision lens barrels is widely applied to ultra-high performance optical system. ITRC applies the poker chip assembly technology to the high numerical aperture objective lenses and lithography projection lenses because of its high efficiency assembly process. In order to achieve high precision lens cell for poker chip assembly, an alignment turning system (ATS) is developed. The ATS includes measurement, alignment and turning modules. The measurement module is equipped with a non-contact displacement sensor (NCDS) and an autocollimator (ACM). The NCDS and ACM are used to measure centration errors of the top and the bottom surface of a lens respectively; then the amount of adjustment of displacement and tilt with respect to the rotational axis of the turning machine for the alignment module can be determined. After measurement, alignment and turning processes on the ATS, the centration error of a lens cell with 200 mm in diameter can be controlled within 10 arcsec. Furthermore, a poker chip assembly lens cell with three sub-cells is demonstrated, each sub-cells are measured and accomplished with alignment and turning processes. The lens assembly test for five times by each three technicians; the average transmission centration error of assembly lens is 12.45 arcsec. The results show that ATS can achieve high assembly efficiency for precision optical systems.

  2. Quantification of Greenhouse Gas Emission Rates from strong Point Sources by Space-borne IPDA Lidar Measurements: Results from a Sensitivity Analysis Study

    Science.gov (United States)

    Ehret, G.; Kiemle, C.; Rapp, M.

    2017-12-01

    The practical implementation of the Paris Agreement (COP21) vastly profit from an independent, reliable and global measurement system of greenhouse gas emissions, in particular of CO2, in order to complement and cross-check national efforts. Most fossil-fuel CO2 emitters emanate from large sources such as cities and power plants. These emissions increase the local CO2 abundance in the atmosphere by 1-10 parts per million (ppm) which is a signal that is significantly larger than the variability from natural sources and sinks over the local source domain. Despite these large signals, they are only sparsely sampled by the ground-based network which calls for satellite measurements. However, none of the existing and forthcoming passive satellite instruments, operating in the NIR spectral domain, can measure CO2 emissions at night time or in low sunlight conditions and in high latitude regions in winter times. The resulting sparse coverage of passive spectrometers is a serious limitation, particularly for the Northern Hemisphere, since these regions exhibit substantial emissions during the winter as well as other times of the year. In contrast, CO2 measurements by an Integrated Path Differential Absorption (IPDA) Lidar are largely immune to these limitations and initial results from airborne application look promising. In this study, we discuss the implication for a space-borne IPDA Lidar system. A Gaussian plume model will be used to simulate the CO2-distribution of large power plants downstream to the source. The space-borne measurements are simulated by applying a simple forward model based on Gaussian error distribution. Besides the sampling frequency, the sampling geometry (e.g. measurement distance to the emitting source) and the error of the measurement itself vastly impact on the flux inversion performance. We will discuss the results by incorporating Gaussian plume and mass budget approaches to quantify the emission rates.

  3. Interesting Interest Points

    DEFF Research Database (Denmark)

    Aanæs, Henrik; Dahl, Anders Lindbjerg; Pedersen, Kim Steenstrup

    2012-01-01

    on spatial invariance of interest points under changing acquisition parameters by measuring the spatial recall rate. The scope of this paper is to investigate the performance of a number of existing well-established interest point detection methods. Automatic performance evaluation of interest points is hard......Not all interest points are equally interesting. The most valuable interest points lead to optimal performance of the computer vision method in which they are employed. But a measure of this kind will be dependent on the chosen vision application. We propose a more general performance measure based...... position. The LED illumination provides the option for artificially relighting the scene from a range of light directions. This data set has given us the ability to systematically evaluate the performance of a number of interest point detectors. The highlights of the conclusions are that the fixed scale...

  4. First turn around strategy for RHIC

    International Nuclear Information System (INIS)

    Milutinovic, J.; Ruggiero, A.G.

    1991-01-01

    The authors present a strategy for achieving the so-called first turn around in RHIC. The strategy is based on the same method proposed to correct a distorted closed orbit in RHIC, i.e. on a generalization of the local three-bump method. They found out that the method is very effective in passing the beam through a non-ideal, insufficiently known, machine. The perturbed lattice was generated by the code PATRIS, which was also adapted to control the newly developed software. In ten distributions of errors the software was capable of passing the beam through in 2-3 injection attempts, at full sextupole strength. It was also determined that once the beam makes the first turn around and all the correctors are energized, it stays in the machine for at least several hundred turns

  5. The embodied turn in research on language and social interaction

    DEFF Research Database (Denmark)

    Nevile, Maurice

    2015-01-01

    I use the term the embodied turn to mean the point when interest in the body became established among researchers on language and social interaction, exploiting the greater ease of video-recording. This review paper tracks the growth of "embodiment" in over 400 papers published in Research...... on Language and Social Interaction from 1987-2013. I consider closely two areas where analysts have confronted challenges, and how they have responded: settling on precise and analytically helpful terminology for the body; and transcribing and representing the body, particularly its temporality and manner....

  6. Turning a Poor Ion Channel into a Good Pump

    Science.gov (United States)

    Astumian, Dean

    2003-05-01

    We consider a membrane protein that can exist in two configurations, either one of which acts as a poor ion channel, allowing ions to slowly leak across the membrane from high to low elctrochemical potential. We show that random external fluctuations can provide the energy to turn this poor channel into a good pump that drives ion transport from low to high electrochemical potential. We discuss this result in terms of a gambling analogy, and point to possible implications for fields as far ranging as population biology, economics, and actuarial science.

  7. Dynamic characterization of the cutting conditions in dry turning

    Energy Technology Data Exchange (ETDEWEB)

    Serra, R [ENI Val de Loire, Universite Francois Rabelais de Tours, Laboratoire de Mecanique et Rheologie, E.A. 2640, B.P. 3410, 41034 Blois Cedex (France); Chibane, H [Universite Francois Rabelais, Laboratoire de Mecanique et Rheologie, E.A. 2640, B.P. 3410, 41034 Blois Cedex (France); Leroy, R, E-mail: roger.serra@univ-tours.f [Universite Francois Rabelais, Polytech' Tours, Laboratoire de Mecanique et Rheologie, E.A. 2640, 7 Avenue Marcel Dassault, 37200 Tours (France)

    2009-08-01

    Machining instability in the form of violent vibrations or chatter is a physical process characterized by extreme cutting force at the cutting point. The process has very negative impact on machine integrity, tool life, surface quality and dimensional accuracy. Thus it could significantly compromise productivity and manufacturing quality. In the present paper, the importance of characterization and identification of dynamic instability in dry turning operation are shown. The stability behaviour of machine vibration or chatter has been examined and the various relevant parameters are studied and discuted. For chatter detection and identification of the transition between stable and unstable states, different methods are used. Results obtained proof the accuracy of these methods.

  8. BP « Deepwater Horizon » du Golfe du Mexique à l’Afrique : un tournant pour l’industrie pétrolière ? BP “Deepwater Horizon” from the Gulf of Mexico to Africa : a turning point for the Oil Industry ?

    Directory of Open Access Journals (Sweden)

    Géraud Magrin

    2010-09-01

    Full Text Available L’explosion de la plateforme BP Deepwater Horizon du 20 avril 2010 constitue une des plus graves pollutions pétrolières de l’histoire. Sa localisation dans les eaux du premier consommateur mondial, et l’implication d’une des compagnies les plus avancées en matière de responsabilité sociale d’entreprise, sont révélatrices des enjeux actuels de la gestion environnementale des risques pétroliers. Alors que les gisements les plus accessibles sont exploités par des sociétés nationales, les compagnies internationales satisfont l’inextinguible demande en pétrole du système mondial en explorant des situations extrêmes, comme les eaux très profondes. Cela s’accompagne de risques croissants. La catastrophe de BP nous montre le danger de considérer un risque infime comme une absence de risque : l’exemption de planification d’urgence explique la longue durée et l’ampleur de la fuite. Elle rappelle aussi que les impacts du pétrole ne sont bien connus qu’à la surface et le long des côtes : or, cette fuite en eaux profondes causera des dommages écologiques graves dans les zones pélagiques. Cet événement changera les règles du jeu de la régulation environnementale pétrolière dans les zones sensibles. Nous donnons un aperçu des évolutions qu’il pourrait favoriser en Afrique, notamment en Mauritanie. Il reste à savoir si l’augmentation des coûts qui en résultera contribuera à accélérer la transition énergétique mondiale hors de la dépendance des hydrocarbures.On Thursday the 20th april 2010, the blowout of the Deepwater Horizon drilling platform operated by BP in the Gulf of Mexico starts what can be considered one of the major oil spills in the world history. Taking place in the national waters of the world’s first oil consumer and affecting one of the more advanced oil major in Corporate Social Responsibility, this accident may turn out to be a land mark for environmental management in the

  9. Poisson branching point processes

    International Nuclear Information System (INIS)

    Matsuo, K.; Teich, M.C.; Saleh, B.E.A.

    1984-01-01

    We investigate the statistical properties of a special branching point process. The initial process is assumed to be a homogeneous Poisson point process (HPP). The initiating events at each branching stage are carried forward to the following stage. In addition, each initiating event independently contributes a nonstationary Poisson point process (whose rate is a specified function) located at that point. The additional contributions from all points of a given stage constitute a doubly stochastic Poisson point process (DSPP) whose rate is a filtered version of the initiating point process at that stage. The process studied is a generalization of a Poisson branching process in which random time delays are permitted in the generation of events. Particular attention is given to the limit in which the number of branching stages is infinite while the average number of added events per event of the previous stage is infinitesimal. In the special case when the branching is instantaneous this limit of continuous branching corresponds to the well-known Yule--Furry process with an initial Poisson population. The Poisson branching point process provides a useful description for many problems in various scientific disciplines, such as the behavior of electron multipliers, neutron chain reactions, and cosmic ray showers

  10. Leibniz, Lefebvre and the spatial turn in law

    Directory of Open Access Journals (Sweden)

    Isolde de Villiers

    2016-11-01

    Full Text Available This contribution takes as its point of departure the spatial turn in law and the notion of spatial justice. It traces the term ‘spatial justice’ as introduced through the Spatial Planning and Land Use Management Act and it looks at the underlying view of space that has influenced the spatial turn in law. It furthermore investigates the ways in which the spatial turn in law has been influenced by the thinking of Henri Lefebvre, who relies on a Leibnizian conception of space. Lastly the link between Leibniz and legal positivism is considered in order to reach the final conclusion in the form of a caution against merely adding the language of spatial justice to an approach to space that remains caught up in abstract space. This will only further entrench existing fault lines in society. For this conclusion the work of Roger Berkowitz is central. Berkowitz argues convincingly that the work of Leibniz was central in the development of legal positivism, despite Leibniz in general being considered as a natural law thinker. The same applies to spatial justice theory, where the work of Leibniz is central: it may present the possibilities of another law – the law as it ought to be. The law conceptualised as ‘ought’ instead of ‘is’ would promote reconciliation. Alternatively, spatial justice can simply present the law as it ‘is’ and reconfirm and deepen the chasms in our world.

  11. A Practice Turn for Teacher Education?

    Science.gov (United States)

    Reid, Jo-Anne

    2011-01-01

    Within the Research Institute for Professional Practice, Learning and Education (RIPPLE) at Charles Sturt University, teacher education researchers have been quick to respond to the opportunities created by what is known as "the practice turn" that characterises contemporary theory around the globe and across disciplines. We are working,…

  12. The Dynamic Turn in Quantum Logic

    NARCIS (Netherlands)

    Baltag, A.; Smets, S.

    2012-01-01

    In this paper we show how ideas coming from two areas of research in logic can reinforce each other. The first such line of inquiry concerns the "dynamic turn" in logic and especially the formalisms inspired by Propositional Dynamic Logic (PDL); while the second line concerns research into the

  13. The dynamic turn in quantum logic

    NARCIS (Netherlands)

    Baltag, Alexandru; Smets, Sonja

    In this paper we show how ideas coming from two areas of research in logic can reinforce each other. The first such line of inquiry concerns the "dynamic turn" in logic and especially the formalisms inspired by Propositional Dynamic Logic (PDL); while the second line concerns research into the

  14. Primordial spectra from sudden turning trajectory

    Science.gov (United States)

    Noumi, Toshifumi; Yamaguchi, Masahide

    2013-12-01

    Effects of heavy fields on primordial spectra of curvature perturbations are discussed in inflationary models with a sudden turning trajectory. When heavy fields are excited after the sudden turn and oscillate around the bottom of the potential, the following two effects are generically induced: deformation of the inflationary background spacetime and conversion interactions between adiabatic and isocurvature perturbations, both of which can affect the primordial density perturbations. In this paper, we calculate primordial spectra in inflationary models with sudden turning potentials taking into account both of the two effects appropriately. We find that there are some non-trivial correlations between the two effects in the power spectrum and, as a consequence, the primordial scalar power spectrum has a peak around the scale exiting the horizon at the turn. Though both effects can induce parametric resonance amplifications, they are shown to be canceled out for the case with the canonical kinetic terms. The peak feature and the scale dependence of bispectra are also discussed.

  15. Business Intelligence: Turning Knowledge into Power

    Science.gov (United States)

    Endsley, Krista

    2009-01-01

    Today, many school districts are turning to business intelligence tools to retrieve, organize, and share knowledge for faster analysis and more effective, guided decision making. Business intelligence (BI) tools are the technologies and applications that gather and report information to help an organization's leaders make better decisions. BI…

  16. Zigzag turning preference of freely crawling cells.

    Directory of Open Access Journals (Sweden)

    Taeseok Daniel Yang

    Full Text Available The coordinated motion of a cell is fundamental to many important biological processes such as development, wound healing, and phagocytosis. For eukaryotic cells, such as amoebae or animal cells, the cell motility is based on crawling and involves a complex set of internal biochemical events. A recent study reported very interesting crawling behavior of single cell amoeba: in the absence of an external cue, free amoebae move randomly with a noisy, yet, discernible sequence of 'run-and-turns' analogous to the 'run-and-tumbles' of swimming bacteria. Interestingly, amoeboid trajectories favor zigzag turns. In other words, the cells bias their crawling by making a turn in the opposite direction to a previous turn. This property enhances the long range directional persistence of the moving trajectories. This study proposes that such a zigzag crawling behavior can be a general property of any crawling cells by demonstrating that 1 microglia, which are the immune cells of the brain, and 2 a simple rule-based model cell, which incorporates the actual biochemistry and mechanics behind cell crawling, both exhibit similar type of crawling behavior. Almost all legged animals walk by alternating their feet. Similarly, all crawling cells appear to move forward by alternating the direction of their movement, even though the regularity and degree of zigzag preference vary from one type to the other.

  17. Strategy in Generative Planning of Turning Processes

    NARCIS (Netherlands)

    van Houten, Frederikus J.A.M.; Kals, H.J.J.

    1986-01-01

    This paper reports on the process and operations planning system ROUND and the strategies which underlie the decision making processes in the planning of turning operations. At first, an outline is given about the environment for which generative systems like ROUND are being developed. The

  18. Turn-key SRF accelerators to drive subcritical reactors

    International Nuclear Information System (INIS)

    Johnson, Rolland P.

    2011-01-01

    Large particle accelerator projects, both accomplished and proposed, have been used to engage US industry through contracts and grants to develop efficient capabilities to design, develop, produce, and deliver entire accelerator systems or any needed subsystems. Staffed in many cases by experienced scientists and engineers from National Laboratories and Universities, existing companies could extend their portfolios to offer turn-key accelerators with parameters to match the needs of ADS. If the reactors were based on molten salt fuel such that trip rate requirements were relaxed, the developments needed for a multi-MW proton accelerator for ADS would be minimal. Turn-key SRF proton linacs for ADS operation can be ordered now to enable GW-level power generation from natural thorium, natural uranium, or nuclear waste from conventional reactors. (author)

  19. Reconceptualizing Autonomy: A Relational Turn in Bioethics.

    Science.gov (United States)

    Jennings, Bruce

    2016-05-01

    History's judgment on the success of bioethics will not depend solely on the conceptual creativity and innovation in the field at the level of ethical and political theory, but this intellectual work is not insignificant. One important new development is what I shall refer to as the relational turn in bioethics. This development represents a renewed emphasis on the ideographic approach, which interprets the meaning of right and wrong in human actions as they are inscribed in social and cultural practices and in structures of lived meaning and interdependence; in an ideographic approach, the task of bioethics is to bring practice into theory, not the other way around. The relational turn in bioethics may profoundly affect the critical questions that the field asks and the ethical guidance it offers society, politics, and policy. The relational turn provides a way of correcting the excessive atomism of many individualistic perspectives that have been, and continue to be, influential in bioethics. Nonetheless, I would argue that most of the work reflecting the relational turn remains distinctively liberal in its respect for the ethical significance of the human individual. It moves away from individualism, but not from the value of individuality.In this review essay, I shall focus on how the relational turn has manifested itself in work on core concepts in bioethics, especially liberty and autonomy. Following a general review, I conclude with a brief consideration of two important recent books in this area: Jennifer Nedelsky's Law's Relations and Rachel Haliburton's Autonomy and the Situated Self. © 2016 The Hastings Center.

  20. Silicon Carbide Emitter Turn-Off Thyristor

    Directory of Open Access Journals (Sweden)

    Jun Wang

    2008-01-01

    Full Text Available A novel MOS-controlled SiC thyristor device, the SiC emitter turn-off thyristor (ETO is a promising technology for future high-voltage switching applications because it integrates the excellent current conduction capability of a SiC thyristor with a simple MOS-control interface. Through unity-gain turn-off, the SiC ETO also achieves excellent Safe Operation Area (SOA and faster switching speeds than silicon ETOs. The world's first 4.5-kV SiC ETO prototype shows a forward voltage drop of 4.26 V at 26.5 A/cm2 current density at room and elevated temperatures. Tested in an inductive circuit with a 2.5 kV DC link voltage and a 9.56-A load current, the SiC ETO shows a fast turn-off time of 1.63 microseconds and a low 9.88 mJ turn-off energy. The low switching loss indicates that the SiC ETO could operate at about 4 kHz if 100 W/cm2 conduction and the 100 W/cm2 turn-off losses can be removed by the thermal management system. This frequency capability is about 4 times higher than 4.5-kV-class silicon power devices. The preliminary demonstration shows that the SiC ETO is a promising candidate for high-frequency, high-voltage power conversion applications, and additional developments to optimize the device for higher voltage (>5 kV and higher frequency (10 kHz are needed.

  1. Research of remote control system in turn by turn timing system

    International Nuclear Information System (INIS)

    Zhan Zhifeng; Xiao Yanguo; Ma Kui; Yin Zejie; Wu Xiaoyi

    2003-01-01

    In this paper, we introduce a remote control system which is used in a frequency dividing and time-delay module. This control system is based on client/server architecture, and RS232 serial communication protocol. This control system is used in timing system of NSRL turn by turn beam position monitor

  2. Determination of linear optics functions from turn-by-turn data

    Energy Technology Data Exchange (ETDEWEB)

    Alexahin, Y; Gianfelice-Wendt, E, E-mail: alexahin@fnal.gov [Fermi National Accelerator Laboratory, P.O. Box 500, Batavia, Illinois 60510 (United States)

    2011-10-15

    A method for evaluation of coupled optics functions, detection of strong perturbing elements, determination of BPM calibration errors and tilts using turn-by-turn (TBT) data is presented as well as the new version of the Hamiltonian perturbation theory of betatron oscillations the method is based upon. An example of application of the considered method to the Tevatron is given.

  3. Electrical Machines: Turn-to-Turn Capacitance in Formed Windings with Rectangular Cross-Section Wire

    NARCIS (Netherlands)

    Djukic, Nenad; Encica, L.; Paulides, Johan

    2015-01-01

    Calculation of turn-to-turn capacitance (Ctt) in electrical machines (EMs) with formed windings with rectangular cross-section wire is presented. Three calculation methods are used for the calculation of Ctt in case of rectangular conductors – finite element (FE) method and two previously published

  4. Immediate Effects of Clock-Turn Strategy on the Pattern and Performance of Narrow Turning in Persons With Parkinson Disease.

    Science.gov (United States)

    Yang, Wen-Chieh; Hsu, Wei-Li; Wu, Ruey-Meei; Lin, Kwan-Hwa

    2016-10-01

    Turning difficulty is common in people with Parkinson disease (PD). The clock-turn strategy is a cognitive movement strategy to improve turning performance in people with PD despite its effects are unverified. Therefore, this study aimed to investigate the effects of the clock-turn strategy on the pattern of turning steps, turning performance, and freezing of gait during a narrow turning, and how these effects were influenced by concurrent performance of a cognitive task (dual task). Twenty-five people with PD were randomly assigned to the clock-turn or usual-turn group. Participants performed the Timed Up and Go test with and without concurrent cognitive task during the medication OFF period. The clock-turn group performed the Timed Up and Go test using the clock-turn strategy, whereas participants in the usual-turn group performed in their usual manner. Measurements were taken during the 180° turn of the Timed Up and Go test. The pattern of turning steps was evaluated by step time variability and step time asymmetry. Turning performance was evaluated by turning time and number of turning steps. The number and duration of freezing of gait were calculated by video review. The clock-turn group had lower step time variability and step time asymmetry than the usual-turn group. Furthermore, the clock-turn group turned faster with fewer freezing of gait episodes than the usual-turn group. Dual task increased the step time variability and step time asymmetry in both groups but did not affect turning performance and freezing severity. The clock-turn strategy reduces turning time and freezing of gait during turning, probably by lowering step time variability and asymmetry. Dual task compromises the effects of the clock-turn strategy, suggesting a competition for attentional resources.Video Abstract available for more insights from the authors (see Supplemental Digital Content 1, http://links.lww.com/JNPT/A141).

  5. Crack turning in integrally stiffened aircraft structures

    Science.gov (United States)

    Pettit, Richard Glen

    Current emphasis in the aircraft industry toward reducing manufacturing cost has created a renewed interest in integrally stiffened structures. Crack turning has been identified as an approach to improve the damage tolerance and fail-safety of this class of structures. A desired behavior is for skin cracks to turn before reaching a stiffener, instead of growing straight through. A crack in a pressurized fuselage encounters high T-stress as it nears the stiffener---a condition favorable to crack turning. Also, the tear resistance of aluminum alloys typically varies with crack orientation, a form of anisotropy that can influence the crack path. The present work addresses these issues with a study of crack turning in two-dimensions, including the effects of both T-stress and fracture anisotropy. Both effects are shown to have relation to the process zone size, an interaction that is central to this study. Following an introduction to the problem, the T-stress effect is studied for a slightly curved semi-infinite crack with a cohesive process zone, yielding a closed form expression for the future crack path in an infinite medium. For a given initial crack tip curvature and tensile T-stress, the crack path instability is found to increase with process zone size. Fracture orthotropy is treated using a simple function to interpolate between the two principal fracture resistance values in two-dimensions. An extension to three-dimensions interpolates between the six principal values of fracture resistance. Also discussed is the transition between mode I and mode II fracture in metals. For isotropic materials, there is evidence that the crack seeks out a direction of either local symmetry (pure mode I) or local asymmetry (pure mode II) growth. For orthotropic materials the favored states are not pure modal, and have mode mixity that is a function of crack orientation. Drawing upon these principles, two crack turning prediction approaches are extended to include fracture

  6. Cut-Off Points for Mild, Moderate, and Severe Pain on the Numeric Rating Scale for Pain in Patients with Chronic Musculoskeletal Pain: Variability and Influence of Sex and Catastrophizing.

    Science.gov (United States)

    Boonstra, Anne M; Stewart, Roy E; Köke, Albère J A; Oosterwijk, René F A; Swaan, Jeannette L; Schreurs, Karlein M G; Schiphorst Preuper, Henrica R

    2016-01-01

    Objectives: The 0-10 Numeric Rating Scale (NRS) is often used in pain management. The aims of our study were to determine the cut-off points for mild, moderate, and severe pain in terms of pain-related interference with functioning in patients with chronic musculoskeletal pain, to measure the variability of the optimal cut-off points, and to determine the influence of patients' catastrophizing and their sex on these cut-off points. Methods: 2854 patients were included. Pain was assessed by the NRS, functioning by the Pain Disability Index (PDI) and catastrophizing by the Pain Catastrophizing Scale (PCS). Cut-off point schemes were tested using ANOVAs with and without using the PSC scores or sex as co-variates and with the interaction between CP scheme and PCS score and sex, respectively. The variability of the optimal cut-off point schemes was quantified using bootstrapping procedure. Results and conclusion: The study showed that NRS scores ≤ 5 correspond to mild, scores of 6-7 to moderate and scores ≥8 to severe pain in terms of pain-related interference with functioning. Bootstrapping analysis identified this optimal NRS cut-off point scheme in 90% of the bootstrapping samples. The interpretation of the NRS is independent of sex, but seems to depend on catastrophizing. In patients with high catastrophizing tendency, the optimal cut-off point scheme equals that for the total study sample, but in patients with a low catastrophizing tendency, NRS scores ≤ 3 correspond to mild, scores of 4-6 to moderate and scores ≥7 to severe pain in terms of interference with functioning. In these optimal cut-off schemes, NRS scores of 4 and 5 correspond to moderate interference with functioning for patients with low catastrophizing tendency and to mild interference for patients with high catastrophizing tendency. Theoretically one would therefore expect that among the patients with NRS scores 4 and 5 there would be a higher average PDI score for those with low

  7. Towards a Practice Turn in EU Studies

    DEFF Research Database (Denmark)

    Adler-Nissen, Rebecca

    2016-01-01

    This article explores how practice theory can be recruited for the study of European integration. New generations of EU researchers are fascinated by the prospect of leaving the armchair and studying the people and artefacts that make the EU on an everyday level. This article surveys key practice......-oriented, anthropological and micro-sociological studies of the EU and European integration and shows how their findings challenge more traditional understandings of the dynamics of European integration. Moving beyond a stock-taking, the article distinguishes between ‘order- ing’ and ‘disordering’ practices and explores...... the potential of a practice turn in EU studies for both theory (overcoming dualism, replacing substantialism with processualism and rethinking power) and methods (including unstructured interviews, fieldwork and participant observation). A practice turn will force us to rethink core assumptions about the EU...

  8. Measurement of tool forces in diamond turning

    Energy Technology Data Exchange (ETDEWEB)

    Drescher, J.; Dow, T.A.

    1988-12-01

    A dynamometer has been designed and built to measure forces in diamond turning. The design includes a 3-component, piezoelectric transducer. Initial experiments with this dynamometer system included verification of its predicted dynamic characteristics as well as a detailed study of cutting parameters. Many cutting experiments have been conducted on OFHC Copper and 6061-T6 Aluminum. Tests have involved investigation of velocity effects, and the effects of depth and feedrate on tool forces. Velocity has been determined to have negligible effects between 4 and 21 m/s. Forces generally increase with increasing depth of cut. Increasing feedrate does not necessarily lead to higher forces. Results suggest that a simple model may not be sufficient to describe the forces produced in the diamond turning process.

  9. When attempts at robbing prey turn fatal

    Science.gov (United States)

    Dejean, Alain; Corbara, Bruno; Azémar, Frédéric; Carpenter, James M.

    2012-07-01

    Because group-hunting arboreal ants spread-eagle insect prey for a long time before retrieving them, these prey can be coveted by predatory flying insects. Yet, attempting to rob these prey is risky if the ant species is also an effective predator. Here, we show that trying to rob prey from Azteca andreae workers is a fatal error as 268 out of 276 potential cleptobionts (97.1 %) were captured in turn. The ant workers hunt in a group and use the "Velcro®" principle to cling firmly to the leaves of their host tree, permitting them to capture very large prey. Exceptions were one social wasp, plus some Trigona spp. workers and flies that landed directly on the prey and were able to take off immediately when attacked. We conclude that in this situation, previously captured prey attract potential cleptobionts that are captured in turn in most of the cases.

  10. FCC-hh turn-around cycle

    CERN Document Server

    Alemany Fernandez, Reyes; Bartmann, Wolfgang; Buffat, Xavier; Niemi, Arto; Schulte, Daniel; Solfaroli Camillocci, Matteo; Stoel, Linda

    2016-01-01

    The turn-around cycle time of a collider is defined as the time spent between the end of stable beams and the start of the next stable beams period, and its calculation is of fundamental importance. On one side it is a crucial ingredient for the computation of the optimal time spent in luminosity production, which defines the integrated luminosity per fill or store. On the other side, combined with the availability and reliability of the machine, it allows to perform a detailed breakdown of the operational performance of the collider over an operational season, i.e. percentage of time in stable beams and beam in the machine with respect to down time. This paper presents a preliminary operational cycle definition for the hadron-hadron Future Circular Collider, as a base line for estimating the corresponding turn-around time. The cycle definition is based on the Large Hadron Collider (LHC) operational cycle. Two turn-around times are presented, the theoretical one and a more realistic one based on the LHC exper...

  11. Beam Optics Measurements Through Turn by Turn Beam Position Data in the SLS

    CERN Document Server

    Zisopoulos, P; Streun, A; Ziemann, v

    2013-01-01

    Refined Fourier analysis of turn-by-turn (TBT) transverse position data measurements can be used for determining several beam properties of a ring, such as transverse tunes, optics functions, phases, chromatic properties and coupling. In particular, the Numerical Analysis of Fundamental Frequencies (NAFF) algorithm is used to analyse TBT data from the Swiss Light Source (SLS) storage ring in order to estimate on and off-momentum beam characteristics. Of particular interest is the potential of using the full position information within one turn in order to measure beam optics properties.

  12. Heading Estimation of Robot Combine Harvesters during Turning Maneuveres

    Directory of Open Access Journals (Sweden)

    Md Mostafizar Rahman

    2018-05-01

    Full Text Available Absolute heading is an important parameter for a robot combine harvester or a robot tracked combine harvester, especially while it is turning, but due to the rapid turning of robot combine harvesters, its inertial measurement unit gives a gyro measurement bias that causes heading drift. Our research goal is to estimate the absolute heading of robot combine harvesters by compensating this gyro measurement bias during non-linear turning maneuvers. A sensor fusion method like the extended Kalman filter combined with the tracked combine harvester dynamic model and sensor measurements was used to estimate the absolute heading of a robot combine harvester. Circular, sinusoidal and concave shapes were used to evaluate the estimated heading produced by the sensor fusion method. The results indicate that the estimated heading is better than measured heading which was calculated from the integration of yaw rate gyro measurements, and the root mean square errors (RMSEs for estimated headings are smaller than the measured headings. In practics, the target of this paper is thus the estimation of a heading or absolute heading that is bias compensated, and can be further used to calculate the exact crop periphery for automatic path planning of robot combine harvesters.

  13. Heading Estimation of Robot Combine Harvesters during Turning Maneuveres.

    Science.gov (United States)

    Rahman, Md Mostafizar; Ishii, Kazunobu

    2018-05-01

    Absolute heading is an important parameter for a robot combine harvester or a robot tracked combine harvester, especially while it is turning, but due to the rapid turning of robot combine harvesters, its inertial measurement unit gives a gyro measurement bias that causes heading drift. Our research goal is to estimate the absolute heading of robot combine harvesters by compensating this gyro measurement bias during non-linear turning maneuvers. A sensor fusion method like the extended Kalman filter combined with the tracked combine harvester dynamic model and sensor measurements was used to estimate the absolute heading of a robot combine harvester. Circular, sinusoidal and concave shapes were used to evaluate the estimated heading produced by the sensor fusion method. The results indicate that the estimated heading is better than measured heading which was calculated from the integration of yaw rate gyro measurements, and the root mean square errors (RMSEs) for estimated headings are smaller than the measured headings. In practics, the target of this paper is thus the estimation of a heading or absolute heading that is bias compensated, and can be further used to calculate the exact crop periphery for automatic path planning of robot combine harvesters.

  14. An oscillator model of the timing of turn-taking.

    Science.gov (United States)

    Wilson, Margaret; Wilson, Thomas P

    2005-12-01

    When humans talk without conventionalized arrangements, they engage in conversation--that is, a continuous and largely nonsimultaneous exchange in which speakers take turns. Turn-taking is ubiquitous in conversation and is the normal case against which alternatives, such as interruptions, are treated as violations that warrant repair. Furthermore, turn-taking involves highly coordinated timing, including a cyclic rise and fall in the probability of initiating speech during brief silences, and involves the notable rarity, especially in two-party conversations, of two speakers' breaking a silence at once. These phenomena, reported by conversation analysts, have been neglected by cognitive psychologists, and to date there has been no adequate cognitive explanation. Here, we propose that, during conversation, endogenous oscillators in the brains of the speaker and the listeners become mutually entrained, on the basis of the speaker's rate of syllable production. This entrained cyclic pattern governs the potential for initiating speech at any given instant for the speaker and also for the listeners (as potential next speakers). Furthermore, the readiness functions of the listeners are counterphased with that of the speaker, minimizing the likelihood of simultaneous starts by a listener and the previous speaker. This mutual entrainment continues for a brief period when the speech stream ceases, accounting for the cyclic property of silences. This model not only captures the timing phenomena observed inthe literature on conversation analysis, but also converges with findings from the literatures on phoneme timing, syllable organization, and interpersonal coordination.

  15. Fuzzy Linguistic Optimization on Surface Roughness for CNC Turning

    Directory of Open Access Journals (Sweden)

    Tian-Syung Lan

    2010-01-01

    Full Text Available Surface roughness is often considered the main purpose in contemporary computer numerical controlled (CNC machining industry. Most existing optimization researches for CNC finish turning were either accomplished within certain manufacturing circumstances or achieved through numerous equipment operations. Therefore, a general deduction optimization scheme is deemed to be necessary for the industry. In this paper, the cutting depth, feed rate, speed, and tool nose runoff with low, medium, and high level are considered to optimize the surface roughness for finish turning based on L9(34 orthogonal array. Additionally, nine fuzzy control rules using triangle membership function with respective to five linguistic grades for surface roughness are constructed. Considering four input and twenty output intervals, the defuzzification using center of gravity is then completed. Thus, the optimum general fuzzy linguistic parameters can then be received. The confirmation experiment result showed that the surface roughness from the fuzzy linguistic optimization parameters is significantly advanced compared to that from the benchmark. This paper certainly proposes a general optimization scheme using orthogonal array fuzzy linguistic approach to the surface roughness for CNC turning with profound insight.

  16. First turn around strategy for RHIC

    International Nuclear Information System (INIS)

    Milutinovic, J.; Ruggiero, A.G.

    1991-06-01

    We present a strategy for achieving the so-called first turn around in RHIC. The strategy is based on the same method we had proposed to correct a distorted closed orbit in RHIC, i.e., on a generalization of the local three-bump method. We found out that the method is very effective in passing the beam through a non-ideal, insufficiently known, machine. We tested that software on ten different Gaussian distributions of dominant orbit distorting lattice imperfections. The perturbed lattice was generated by the code PATRIS, which was also adapted to control the newly developed software. In all of the ten distributions the software was capable of passing the beam through in 2--3 injection attempts, at full sextupole strength. It was also determined that once the beam makes the first turn around and all the correctors are energized, it stays in the machine for at least several hundred turns that we had checked. The quality of the orbit, that was established in this way, was also found to be very good, i.e., the residual distortions at the places of large beta function were much less than one millimeter. With one or two monitors/correctors broken, the software established a first turn around without any extra difficulties. The quality of such orbit was, of course, somewhat degraded, especially around the broken devices. It was also observed that, in the process of actual closing, the beam develops free betatron oscillations in the amplitude range of 1--5 mm, which can be reduced either by changing the injection conditions to better match the actual closed orbit or by an appropriate damping device. The hardware proposed for RHIC is more than sufficient to meet the demands of the first turn controlling software. The maximum kick angle to be applied to the beam would require less than 2/3 of the corrector's top strength even at the top magnetic rigidity Bρ = 850 T·m, which means that the correctors will be performing an easy task at injection

  17. Interferometric evaluation of diamond-turned mirrors for CO2 laser fusion

    International Nuclear Information System (INIS)

    Munroe, J.L.

    1979-01-01

    It is shown that single-point diamond-turned optics exhibit different characteristics than conventionally manufactured optics and the type of information required by the machinist is quite different than the information that would be required by an optician. It was also seen, with Antares being a good example, that single-point diamond turning allows the manufacture of geometries and scales that might be unthinkable if conventional manufacturing were to be used. As single-point diamond turning continues to improve in quality, machined optics will find application at shorter and shorter wavelengths. A whole new formalism to describe manufacturing errors in terms meaningful to the machinist will have to be developed

  18. Nanostructural Evolution of Hard Turning Layers in Carburized Steel

    Science.gov (United States)

    Bedekar, Vikram

    The mechanisms of failure for components subjected to contact fatigue are sensitive to the structure and properties of the material surface. Although, the bulk material properties are determined by the steel making, forming and the heat treatment; the near surface material properties are altered during final material removal processes such as hard turning or grinding. Therefore, the ability to optimize, modulate and predict the near surface properties during final metal removal operations would be extremely useful in the enhancement of service life of a component. Hard machining is known to induce severely deformed layers causing dramatic microstructural transformations. These transformations occur via grain refinement or thermal phenomena depending upon cutting conditions. The aim of this work is to engineer the near surface nanoscale structure and properties during hard turning by altering strain, strain rate, temperature and incoming microstructure. The near surface material transformations due to hard turning were studied on carburized SAE 8620 bearing steel. Variations in parent material microstructures were introduced by altering the retained austenite content. The strain, strain rate and temperature achieved during final metal cutting were altered by varying insert geometry, insert wear and cutting speed. The subsurface evolution was quantified by a series of advanced characterization techniques such as transmission electron microscopy (TEM), glancing angle X-ray diffraction (GAXRD), X-ray stress evaluation and nanoindentation which were coupled with numerical modeling. Results showed that the grain size of the nanocrystalline near surface microstructure can be effectively controlled by altering the insert geometry, insert wear, cutting speed and the incoming microstructure. It was also evident that the near surface retained austenite decreased at lower cutting speed indicating transformation due to plastic deformation, while it increased at higher cutting

  19. Lattice modeling and calibration with turn-by-turn orbit data

    Directory of Open Access Journals (Sweden)

    Xiaobiao Huang

    2010-11-01

    Full Text Available A new method that explores turn-by-turn beam position monitor (BPM data to calibrate lattice models of accelerators is proposed. The turn-by-turn phase space coordinates at one location of the ring are first established using data from two BPMs separated by a simple section with a known transfer matrix, such as a drift space. The phase space coordinates are then tracked with the model to predict positions at other BPMs, which can be compared to measurements. The model is adjusted to minimize the difference between the measured and predicted orbit data. BPM gains and rolls are included as fitting variables. This technique can be applied to either the entire or a section of the ring. We have tested the method experimentally on a part of the SPEAR3 ring.

  20. Lattice modeling and calibration with turn-by-turn orbit data

    Science.gov (United States)

    Huang, Xiaobiao; Sebek, Jim; Martin, Don

    2010-11-01

    A new method that explores turn-by-turn beam position monitor (BPM) data to calibrate lattice models of accelerators is proposed. The turn-by-turn phase space coordinates at one location of the ring are first established using data from two BPMs separated by a simple section with a known transfer matrix, such as a drift space. The phase space coordinates are then tracked with the model to predict positions at other BPMs, which can be compared to measurements. The model is adjusted to minimize the difference between the measured and predicted orbit data. BPM gains and rolls are included as fitting variables. This technique can be applied to either the entire or a section of the ring. We have tested the method experimentally on a part of the SPEAR3 ring.

  1. Multiobjective Optimization of Turning Cutting Parameters for J-Steel Material

    Directory of Open Access Journals (Sweden)

    Adel T. Abbas

    2016-01-01

    Full Text Available This paper presents a multiobjective optimization study of cutting parameters in turning operation for a heat-treated alloy steel material (J-Steel with Vickers hardness in the range of HV 365–395 using uncoated, unlubricated Tungsten-Carbide tools. The primary aim is to identify proper settings of the cutting parameters (cutting speed, feed rate, and depth of cut that lead to reasonable compromises between good surface quality and high material removal rate. Thorough exploration of the range of cutting parameters was conducted via a five-level full-factorial experimental matrix of samples and the Pareto trade-off frontier is identified. The trade-off among the objectives was observed to have a “knee” shape, in which certain settings for the cutting parameters can achieve both good surface quality and high material removal rate within certain limits. However, improving one of the objectives beyond these limits can only happen at the expense of a large compromise in the other objective. An alternative approach for identifying the trade-off frontier was also tested via multiobjective implementation of the Efficient Global Optimization (m-EGO algorithm. The m-EGO algorithm was successful in identifying two points within the good range of the trade-off frontier with 36% fewer experimental samples.

  2. CERN PS Optical Properties Measured with Turn-By-Turn Orbit Data

    CERN Document Server

    Bach, T; Giovannozzi, M; Hernalsteens, C; Lachaize, A; Sterbini, G; Tom´as, R; Wasef, R

    2013-01-01

    The performance of the CERN Proton Synchrotron (PS) has been constantly increasing over the years both in terms of beam parameters (intensity and brightness) and beam manipulations (transverse and longitudinal splitting). This implies a very good knowledge of the linear and non-linear model of the ring. In this paper we report on a detailed campaign of beam measurements based on turn-by-turn orbit data aimed at measuring the optics in several conditions as well as the resonance driving terms.

  3. Hummingbirds control turning velocity using body orientation and turning radius using asymmetrical wingbeat kinematics.

    Science.gov (United States)

    Read, Tyson J G; Segre, Paolo S; Middleton, Kevin M; Altshuler, Douglas L

    2016-03-01

    Turning in flight requires reorientation of force, which birds, bats and insects accomplish either by shifting body position and total force in concert or by using left-right asymmetries in wingbeat kinematics. Although both mechanisms have been observed in multiple species, it is currently unknown how each is used to control changes in trajectory. We addressed this problem by measuring body and wingbeat kinematics as hummingbirds tracked a revolving feeder, and estimating aerodynamic forces using a quasi-steady model. During arcing turns, hummingbirds symmetrically banked the stroke plane of both wings, and the body, into turns, supporting a body-dependent mechanism. However, several wingbeat asymmetries were present during turning, including a higher and flatter outer wingtip path and a lower more deviated inner wingtip path. A quasi-steady analysis of arcing turns performed with different trajectories revealed that changes in radius were associated with asymmetrical kinematics and forces, and changes in velocity were associated with symmetrical kinematics and forces. Collectively, our results indicate that both body-dependent and -independent force orientation mechanisms are available to hummingbirds, and that these kinematic strategies are used to meet the separate aerodynamic challenges posed by changes in velocity and turning radius. © 2016 The Author(s).

  4. Kinematical Comparison of the 200 m Backstroke Turns between National and Regional Level Swimmers

    Science.gov (United States)

    Veiga, Santiago; Cala, Antonio; Frutos, Pablo González; Navarro, Enrique

    2013-01-01

    The aims of this investigation were to determine the evolution of selected turn variables during competitive backstroke races and to compare these kinematic variables between two different levels of swimmers. Sixteen national and regional level male swimmers participant in the 200 m backstroke event at the Spanish Swimming Championships in short course (25 m) were selected to analyze their turn performances. The individual distances method with two-dimensional Direct Linear Transformation (2D-DLT) algorithms was used to perform race analyses. National level swimmers presented a shorter “turn time”, a longer “distance in”, a faster “underwater velocity” and “normalized underwater velocity”, and a faster “stroking velocity” than regional level swimmers, whereas no significant differences were detected between levels for the “underwater distance”. National level swimmers maintained similar “turn times” over the event and increased “underwater velocity” and “normalized underwater velocity” in the last (seventh) turn segment, whereas regional level swimmers increased “turn time” in the last half of the race. For both national and regional level swimmers, turn “underwater distance” during the last three turns of the race was significantly shorter while no significant differences in distance into the wall occurred throughout the race. The skill level of the swimmers has an impact on the competitive backstroke turn segments. In a 200 m event, the underwater velocity should be maximized to maintain turn proficiency, whereas turn distance must be subordinated to the average velocity. Key Points The underwater turn velocity is as a critical variable related to the swimmers’ level of skill in a 200 m backstroke event. Best swimmers perform faster but no longer turn segments during a 200 m backstroke event. Best swimmers maintain their turn performance throughout the 200 m backstroke event by increasing the underwater velocity

  5. Alchemical inflation: inflaton turns into Higgs

    Science.gov (United States)

    Nakayama, Kazunori; Takahashi, Fuminobu

    2012-11-01

    We propose a new inflation model in which a gauge singlet inflaton turns into the Higgs condensate after inflation. The inflationary path is characterized by a moduli space of supersymmetric vacua spanned by the inflaton and Higgs field. The inflation energy scale is related to the soft supersymmetry breaking, and the Hubble parameter during inflation is smaller than the gravitino mass. The initial condition for the successful inflation is naturally realized by the pre-inflation in which the Higgs plays a role of the waterfall field.

  6. Alchemical inflation: inflaton turns into Higgs

    International Nuclear Information System (INIS)

    Nakayama, Kazunori; Takahashi, Fuminobu

    2012-01-01

    We propose a new inflation model in which a gauge singlet inflaton turns into the Higgs condensate after inflation. The inflationary path is characterized by a moduli space of supersymmetric vacua spanned by the inflaton and Higgs field. The inflation energy scale is related to the soft supersymmetry breaking, and the Hubble parameter during inflation is smaller than the gravitino mass. The initial condition for the successful inflation is naturally realized by the pre-inflation in which the Higgs plays a role of the waterfall field

  7. An elevator for lifting and turning pipes

    Energy Technology Data Exchange (ETDEWEB)

    Melnikov, S.P.; Borchenkov, G.I.; Komarov, V.N.; Lebedev, D.A.

    1983-01-01

    An elevator is proposed for lifting and turning pipes, which includes a body and a bushing hinged to it with projections and a shank with a threaded adapter and cams which interact with the projections of the bushing. In order to increase the operational safety of the device through ensuring the capability of eliminating drops in the torque from the shank to the body when raising and extracting drill pipes, the body is equipped with eccentric cams rigidly connected to it, while the shank is equipped with a ring movable connected with it. The eccentric cams are installed between the bushing and the body with the capability of interacting with the shank ring.

  8. Turning Points in Qualitative Research: Tying Knots in a Handkerchief. Crossroads in Qualitative Inquiry Series.

    Science.gov (United States)

    Lincoln, Yvonna S., Ed.; Denzin, Norman K., Ed.

    The chapters of this volume traces the changes in the discipline of qualitative inquiry over the last five decades. The collection serves as a textbook for training scholars in the history and trajectory of qualitative research. The chapters of part 1, The Revolution of Representation: Feminist and Race/Ethnic Studies Discourses, are: (1) Situated…

  9. Ultrasonically Assisted Single Point Diamond Turning of Optical Mold of Tungsten Carbide

    Directory of Open Access Journals (Sweden)

    Zhanjie Li

    2018-02-01

    Full Text Available To realize high efficiency, low/no damage and high precision machining of tungsten carbide used for lens mold, a high frequency ultrasonic vibration cutting system was developed at first. Then, tungsten carbide was precisely machined with a polycrystalline diamond (PCD tool assisted by the self-developed high frequency ultrasonic vibration cutting system. Tool wear mechanism was investigated in ductile regime machining of tungsten carbide. The cutter back-off phenomenon in the process was analyzed. The subsequent experimental results of ultra-precision machining with a single crystal diamond tool showed that: under the condition of high frequency ultrasonic vibration cutting, nano-scale surface roughness can be obtained by the diamond tool with smaller tip radius and no defects like those of ground surface were found on the machined surface. Tool wear mechanisms of the single crystal diamond tool are mainly abrasive wear and micro-chipping. To solve the problem, a method of inclined ultrasonic vibration cutting with negative rake angle was put forward according to force analysis, which can further reduce tool wear and roughness of the machined surface. The investigation was important to high efficiency and quality ultra-precision machining of tungsten carbide.

  10. EUROPEAN EMISSION TRADING SCHEME AT A TURNING POINT – FROM THE PILOT PHASE TO POST-2012

    Directory of Open Access Journals (Sweden)

    Aura Carmen Slate

    2011-09-01

    Full Text Available Climate change action has become a top priority for the European governments and for the European Union. Since the polluters are part of the energy-intensive industries, the mechanisms designed to reduce greenhouse gas emissions should focus on the economic sector as a primary source of concern. Therefore, environmental issues interrelate with the economic ones and one viable expression of this relation is the EU ETS, a cap-and-trade mechanism. The ETS started with a pilot phase in year 2005 and will continue with a third phase after 2012, period which coincides with the end of Kyoto’s commitment. Although statistical data prove that the EU ETS is becoming more efficient with each phase, in the absence of global involvement the efforts invested in the scheme will be made in vain.

  11. From Wage Rigidities to Labour Market Rigidities: A Turning-Point in Explaining Equilibrium Unemployment?

    OpenAIRE

    Marco Guerrazzi; Nicola Meccheri

    2009-01-01

    This paper offers a critical discussion of the concept of labour market rigidity relevant to explaining unemployment. Starting from Keynes’s own view, we discuss how the concept of labour market flexibility has changed over time, involving nominal or real wage flexibility, contract flexibility or labour market institution flexibility. We also provide a critical assessment of the factors that lead the search framework highlighting labour market rigidities (frictions) to challenge the more wide...

  12. Is Educational Achievement a Turning Point for Incarcerated Delinquents across Race and Sex?

    Science.gov (United States)

    Blomberg, Thomas G.; Bales, William D.; Piquero, Alex R.

    2012-01-01

    Research has linked the role of education to delinquency, but much of the focus has been on general population samples and with little attention to demographic differences. Employing a cumulative disadvantage framework that integrates elements of informal social control and labeling theories, this article examines whether academic achievement…

  13. Brit Crit: Turning Points in British Rock Criticism 1960-1990

    DEFF Research Database (Denmark)

    Gudmundsson, Gestur; Lindberg, U.; Michelsen, M.

    2002-01-01

    had national specific traits and there have been more profound paradigm shifts than in American rock criticism. This is primarily explained by the fact that American rock criticism is more strongly connected to general cultural history, while the UK rock criticism has been more alienated from dominant......The article examines the development of rock criticism in the United Kingdom from the perspective of a Bourdieuan field-analysis. Early British rock critics, like Nik Cohn, were international pioneers, a few years later there was a strong American influence, but British rock criticism has always...... culture and more linked to youth culture. However, also in the UK rock criticism has been part and parcel of the legitimation of rock culture and has moved closer to dominant fields and positions in the cultural hierarchy....

  14. China's climate change positions: at a turning point?

    Energy Technology Data Exchange (ETDEWEB)

    Tangen, K.; Heggelund, G.; Buen, J.

    2001-03-01

    The purpose of this article is to discuss major concerns and perceptions underlying Chinese positions in the international climate negotiations. China has asserted that concrete action on the part of developed countries is a precondition for any developing country action. It has been sceptical of the Kyoto Mechanisms and has consistently refused to discuss quantified emission limits for developing countries. China's position regarding the Clean Development Mechanism has, however, developed from scepticism towards a more pragmatic focus on maximising benefits. The dynamics of China's positioning can partly be explained by perceptions of costs, but also 'high politics', and tactical considerations. However, in light of the external and internal forces for change, it is worth asking how long it will be in China's interest to stick to its present position. (author)

  15. Is the GAIN Act a turning point in new antibiotic discovery?

    Science.gov (United States)

    Brown, Eric D

    2013-03-01

    The United States GAIN (Generating Antibiotic Incentives Now) Act is a call to action for new antibiotic discovery and development that arises from a ground swell of concern over declining activity in this therapeutic area in the pharmaceutical sector. The GAIN Act aims to provide economic incentives for antibiotic drug discovery in the form of market exclusivity and accelerated drug approval processes. The legislation comes on the heels of nearly two decades of failure using the tools of modern drug discovery to find new antibiotic drugs. The lessons of failure are examined herein as are the prospects for a renewed effort in antibiotic drug discovery and development stimulated by new investments in both the public and private sector.

  16. Rothamsted’s aphid-resistant wheat – a turning point for GMOs?

    Directory of Open Access Journals (Sweden)

    Lynas Mark

    2012-10-01

    Full Text Available Abstract Rothamsted Research mounted a successful counter-campaign in response to a threat by environmental protesters to destroy their research project examining aphid-resistant genetically modified (GM wheat. This involved the use of online media, petitions, and other tools, by which researchers engaged directly with media and the general public in defense of their work. Lessons are suggested for other researchers in the controversial field of GM plant breeding.

  17. Bernhard Riemann 1826-1866 Turning Points in the Conception of Mathematics

    CERN Document Server

    Laugwitz, Detlef

    2008-01-01

    The name of Bernard Riemann is well known to mathematicians and physicists around the world. College students encounter the Riemann integral early in their studies. Real and complex function theories are founded on Riemann’s work. Einstein’s theory of gravitation would be unthinkable without Riemannian geometry. In number theory, Riemann’s famous conjecture stands as one of the classic challenges to the best mathematical minds and continues to stimulate deep mathematical research. The name is indelibly stamped on the literature of mathematics and physics. This book, originally written in German and presented here in an English-language translation, examines Riemann’s scientific work from a single unifying perspective. Laugwitz describes Riemann’s development of a conceptual approach to mathematics at a time when conventional algorithmic thinking dictated that formulas and figures, rigid constructs, and transformations of terms were the only legitimate means of studying mathematical objects. David Hi...

  18. Stressors and Turning Points in High School and Dropout: A Stress Process, Life Course Framework

    Science.gov (United States)

    Dupéré, Véronique; Leventhal, Tama; Dion, Eric; Crosnoe, Robert; Archambault, Isabelle; Janosz, Michel

    2015-01-01

    High school dropout is commonly seen as the result of a long-term process of failure and disengagement. As useful as it is, this view has obscured the heterogeneity of pathways leading to dropout. Research suggests, for instance, that some students leave school not as a result of protracted difficulties but in response to situations that emerge…

  19. Turning point in the study of human factors: From centurion to modern man

    International Nuclear Information System (INIS)

    Bienvenu, C.; Larchier-Boulanger, J.

    1988-01-01

    For many years, it has been traditional to declare the superiority of man over the machine. The notion of man's fragility in confrontation with his machine only emerged slowly, and indeed as a result of a succession of catastrophes. The first of these date back to the railway age (signal errors), while more recent instances are to be found in the fields of aviation (pilot errors) and nuclear power. Increasing attention and in-depth studies have been devoted to the relationship between man and the machine. The following topics are discussed: the ergonomic era, emergence of the group situation, the institutional aspect, and the weight of society

  20. Revealing turning points in ecosystem functioning over the Northern Eurasian agricultural frontier

    DEFF Research Database (Denmark)

    Horion, Stéphanie Marie Anne F; Prishchepov, Alexander; Verbesselt, Jan

    2016-01-01

    in such highly complex systems. In this research a piece-wise linear regression method was used for breakpoint detection in Rain-Use Efficiency (RUE) time series and a classification of ecosystem response types was produced. Supported by earth observation data, field data and expert knowledge, this study...

  1. 17th century – a turning point in the development of modern science

    OpenAIRE

    Hebrang Grgić, Ivana

    2007-01-01

    This paper explains the development of modern science and scientific comunication in the 17th century. Postulates of Modern Age philosophers René Descartes and Francis Bacon are interpreted. The need for scientific communication resulted in organizing scientific guilds as well as in the publishing of the first two scientific journals – Journal des Sçavans and Philosophical Transactions. The beginning of intellectual property protection in European countries and the early development of librar...

  2. ROK-U.S. Security Relations: The China Factor and a Turning Point

    National Research Council Canada - National Science Library

    Kim, Sung

    2002-01-01

    ... to maintaining a tight alliance relationship between Seoul and Washington during the Cold War era, the recently increasing importance of China in South Korea's strategic calculations has become a major...

  3. THE SOMALISATION OF POLITICAL ISLAM: TURNING POINT FOR THE CLASH OF ISLAMISMS IN AFRICA

    Directory of Open Access Journals (Sweden)

    Ignacio Gutiérrez de Terán Gómez-Benita

    2011-04-01

    Full Text Available This article covers – firstly and generally speaking – the gradual process of confrontation between traditional African Islam (and particularly the Sufi brotherhoods and the Salafist tendencies that became established in the continent some time ago. Taking the chronic case of Somalia as an example, the author stresses the fact that in addition to doctrinal differences, it is also important to note that social, economic and cultural factors have also helped to aggravate tensions. These, nevertheless, have even erupted in the heart of organisations backing political Islam, in many cases of Wahhabi origin, owing partly to geostrategic determining factors, and partly to the turbulent debate on the advisability of incorporating processes of national reform and reconciliation. Furthermore, and in a way that is reminiscent of a number of antecedents in countries such as Algeria and Afghanistan, the controversy is focused around which strategy to adopt to fight the local leaders who have been labelled as corrupt, and how to link up with the regional and international powers involved in the conflict. Thus, an extreme Somalisation has also reached African Islamist movements, as can be seen in the current fragmentation of Islamism over much of the continent.

  4. Security of gas supply in open markets. LNG and power at a turning point

    International Nuclear Information System (INIS)

    2004-01-01

    Since the 'IEA Study on Security of Gas Supply' was published in 1995, many member countries have started to open their gas and electricity markets to competition. Governments progressively withdrew from directly managing the gas sector; they concentrate now on setting objectives and the framework for competition. With the continued growth of gas demand and the decline of domestic reserves, most IEA countries have to import more gas, mainly for power generation. This requires access to gas reserves at competitive conditions, as well as timely investment in new infrastructure to ensure a reliable gas supply. Reform has led to open markets, where supply and demand are balanced by the market. In the gas sector, supply is capacity-bound and large parts of the demand side are inelastic. The study looks at how governments and other stakeholders in IEA countries respond to the need to create a framework that enables the players to deliver secure and reliable gas supply at the border and all the way down to the final customer. This book analyses the most recent developments in security of gas supply and reliability in all IEA regions in the context of open markets and in view of the new demand and supply trends. A CD-Rom featuring the positions of the main stakeholders (governments, regulators, industry, customers and other organisations) is included with the publication. 'Security of Gas Supply in Open Markets' is a follow-up of 'Flexibility in Natural Gas Supply and Demand' in the IEA series on energy market reforms

  5. Turning Point: Operation Allied Force and the Allure of Air Power

    Science.gov (United States)

    2014-06-13

    Air Force Base in Nevada, from “a windowless bunker, lit by constantly flickering computer screens,” a Predator drone operator zoomed in on the...how the Army would mitigate risks to the Apaches by using artillery to suppress Serb air defenses before the Apaches went on their deep strike...conflict.” 162Clark, Waging Modern War, 236-7. 163Drozdiak, A22. 164To mitigate alliance member concerns, NATO did not officially refer to

  6. Hatchability of chicken eggs as influenced by turning frequency in ...

    African Journals Online (AJOL)

    An experiment was conducted to determine the influence of turning frequency of chicken eggs on hatchability in hurricane lantern incubator. There were four treatments in which eggs were not turned in treatment one (control), those in treatment two were turned once daily (morning), treatment three turned twice daily ...

  7. Hatchability of chicken eggs as influenced by turning frequency in ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-12-03

    Dec 3, 2008 ... Brake (2004) confirmed that absence of turning resulted in presentation of the head in the small end of the egg. Egg turning facilitated the transfer of yolk nutrients to the embryo via the sub-embryonic fluid (Deeming, 1989a). With modern incubators, automatic turning devices allow the eggs to be turned on ...

  8. Document turn-over analysis to determine need of NPP construction in build-up structures of reinforced concrete

    International Nuclear Information System (INIS)

    Vojpe, D.K.; Lyubavin, V.K.

    1986-01-01

    Document turn-over to determine used of NPP construction in build-up structures of reinforced concrete is carried out. Ways of improving determination of needs of NPP construction board in the mentioned structures are pointed out

  9. Ductile-regime turning of germanium and silicon

    Science.gov (United States)

    Blake, Peter N.; Scattergood, Ronald O.

    1989-01-01

    Single-point diamond turning of silicon and germanium was investigated in order to clarify the role of cutting depth in coaxing a ductile chip formation in normally brittle substances. Experiments based on the rapid withdrawal of the tool from the workpiece have shown that microfracture damage is a function of the effective depth of cut (as opposed to the nominal cutting depth). In essence, damage created by the leading edge of the tool is removed several revolutions later by lower sections of the tool edge, where the effective cutting depth is less. It appears that a truly ductile cutting response can be achieved only when the effective cutting depth, or critical chip thickness, is less than about 20 nm. Factors such as tool rake angle are significant in that they will affect the actual value of the critical chip thickness for transition from brittle to ductile response. It is concluded that the critical chip thickness is an excellent parameter for measuring the effects of machining conditions on the ductility of the cut and for designing tool-workpiece geometry in both turning and grinding.

  10. Development of a Low Cost MQL Setup for Turning Operations

    Directory of Open Access Journals (Sweden)

    Islam Sumaiya

    2017-01-01

    Full Text Available In this study, the effect of MQL application on the tool wear, surface roughness and chip formation in turning Aluminum alloy 6061 is investigated. Experiments were carried out by plain turning of an Aluminum bar with varying depth of cut, cutting speeds (spindle speed and cutting environments (Dry, Wet and MQL. A newly designed, cost efficient and portable MQL setup was developed for this study. For each experimental trial, five passes were carried out in order to promote the formation of tool wear. After each pass, the tool surface was examined under a microscope and the surface roughness was measured using a stylus based surface tester. The extent of tool wear from each pass is measured by using ImageJ software. Chips were collected after the five passes and were physically examined. The newly designed MQL delivery system was successful in delivering a fine mist of lubricant at the cutting point. MQL lubrication provided lower surface roughness and tool wear values compared to wet and dry conditions due to effective temperature reduction and improved lubrication penetration of cutting zones, as well as better chip flushing. Chip formed under MQL conditions had reduced chip thickness due to reduced temperatures. MQL was found to have the greatest positive impact on tool wear and surface roughness parameters based on ANOVA results.

  11. Surface roughness when diamond turning RSA 905 optical aluminium

    Science.gov (United States)

    Otieno, T.; Abou-El-Hossein, K.; Hsu, W. Y.; Cheng, Y. C.; Mkoko, Z.

    2015-08-01

    Ultra-high precision machining is used intensively in the photonics industry for the production of various optical components. Aluminium alloys have proven to be advantageous and are most commonly used over other materials to make various optical components. Recently, the increasing demand from optical systems for optical aluminium with consistent material properties has led to the development of newly modified grades of aluminium alloys produced by rapid solidification in the foundry process. These new aluminium grades are characterised by their finer microstructures and refined mechanical and physical properties. However the machining database of these new optical aluminium grades is limited and more research is still required to investigate their machinability performance when they are diamond turned in ultrahigh precision manufacturing environment. This work investigates the machinability of rapidly solidified aluminium RSA 905 by varying a number of diamond-turning cutting parameters and measuring the surface roughness over a cutting distance of 4 km. The machining parameters varied in this study were the cutting speed, feed rate and depth of cut. The results showed a common trend of decrease in surface roughness with increasing cutting distance. The lowest surface roughness Ra result obtained after 4 km in this study was 3.2 nm. This roughness values was achieved using a cutting speed of 1750 rpm, feed rate of 5 mm/min and depth of cut equal to 25 μm.

  12. The prevalence rate of internet addiction among Japanese college students: two cross-sectional studies and reconsideration of cut-off points of Young's internet addiction test in Japan.

    Science.gov (United States)

    Tateno, Masaru; Teo, Alan R; Shiraishi, Masaki; Tayama, Masaya; Kawanishi, Chiaki; Kato, Takahiro A

    2018-05-30

    Due to variation in estimates of the prevalence of internet addiction (IA) in prior research, we conducted two cross-sectional studies over two years and investigated the prevalence rate of IA in college students in Japan, and reconsidered appropriate cut-off points of self-rating scale to screen possible IA. This study is composed of two parts: survey I in 2014 and survey II in 2016, which were conducted in the same schools with an interval of two years. The study questionnaire included questions about demographics and internet use, and the Young's Internet Addiction Test (IAT). Additionally, the subjects in survey II were asked about self-reported IA. There were 1,005 respondents in total with a mean age of 18.9±1.3. The mean IAT scores remained stable between 2014 and 2016: 45.2±12.6 in survey I and 45.5±13.1 in survey II (overall mean IAT score of 45.4±13.0). With respect to self-reported IA in survey II, a total of 21.6% agreed (score of 5 or 6 on a 6-point Likert scale). We categorized these subjects as IA, and the remainder as non-IA. The mean IAT score showed significant difference between these two groups (57.8±14.3 vs 42.1±10.7, p<0.001). The severity of symptoms of IA among Japanese college students appears stable in recent years, with a mean IAT scores of over 40. Our results suggest that a screening score cut-off of 40 on the IAT could be reconsidered and that of 50 might be proposed for the cut-off. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  13. Measurement of signal use and vehicle turns as indication of driver cognition.

    Science.gov (United States)

    Wallace, Bruce; Goubran, Rafik; Knoefel, Frank

    2014-01-01

    This paper uses data analytics to provide a method for the measurement of a key driving task, turn signal usage as a measure of an automatic over-learned cognitive function drivers. The paper augments previously reported more complex executive function cognition measures by proposing an algorithm that analyzes dashboard video to detect turn indicator use with 100% accuracy without any false positives. The paper proposes two algorithms that determine the actual turns made on a trip. The first through analysis of GPS location traces for the vehicle, locating 73% of the turns made with a very low false positive rate of 3%. A second algorithm uses GIS tools to retroactively create turn by turn directions. Fusion of GIS and GPS information raises performance to 77%. The paper presents the algorithm required to measure signal use for actual turns by realigning the 0.2Hz GPS data, 30fps video and GIS turn events. The result is a measure that can be tracked over time and changes in the driver's performance can result in alerts to the driver, caregivers or clinicians as indication of cognitive change. A lack of decline can also be shared as reassurance.

  14. BetaTPred: prediction of beta-TURNS in a protein using statistical algorithms.

    Science.gov (United States)

    Kaur, Harpreet; Raghava, G P S

    2002-03-01

    beta-turns play an important role from a structural and functional point of view. beta-turns are the most common type of non-repetitive structures in proteins and comprise on average, 25% of the residues. In the past numerous methods have been developed to predict beta-turns in a protein. Most of these prediction methods are based on statistical approaches. In order to utilize the full potential of these methods, there is a need to develop a web server. This paper describes a web server called BetaTPred, developed for predicting beta-TURNS in a protein from its amino acid sequence. BetaTPred allows the user to predict turns in a protein using existing statistical algorithms. It also allows to predict different types of beta-TURNS e.g. type I, I', II, II', VI, VIII and non-specific. This server assists the users in predicting the consensus beta-TURNS in a protein. The server is accessible from http://imtech.res.in/raghava/betatpred/

  15. Changing trends in hospitalization rates associated with psychosis: Spain, 1980-2009.

    Science.gov (United States)

    Medel-Herrero, Alvaro; Amate, J M; Saz-Parkinson, Z; Gómez-Beneyto, M

    2015-12-01

    To analyze the prevalence of hospitalization attributable to psychosis in Spain over the last three decades. Longitudinal analysis (1980-2009) of age-adjusted hospital discharges rates associated with psychosis (ICD9 290-8) in all Spanish hospitals. Spanish Hospital Morbidity Survey. The hospitalization rate associated with psychotic episodes had been gradually increasing since 1980 until 2004; an abrupt turnaround observed in 2004 marks the beginning of a steady decline in the rate. The turning point described is not observed for each of the psychotic diagnoses separately analyzed. However, it is clearly seen when data are grouped in diagnosis-related groups (organic-psychosis, functional psychosis and substance-induced psychosis) since the time course of the diseases within the major diagnostic groups are interrelated as evidenced by shared turning points which collectively display a common time course pattern. Main hospital indicators and antipsychotic drug prescriptions were analyzed for any possible turning point in mid-2000s. Psychiatric hospital beds and length of stays remained stable by 2004; the hospitalizations associated with non-psychotic psychiatric pathologies show no turning point in 2004. However, an abrupt change on antipsychotic drug prescriptions is precisely observed in 2004. After decades of linear growth, hospitalizations for psychotic patients begin to decline in 2004, coinciding with the start of last generation atypical antipsychotic drug consumption in Spain. Some of the psychotic diagnostic rates evolve in an interrelated manner which calls into question the diagnosis and nosological boundaries between some of these pathologies.

  16. Turning on gravity with the Higgs mechanism

    International Nuclear Information System (INIS)

    Alexander, Stephon; Barrow, John D; Magueijo, João

    2016-01-01

    We investigate how a Higgs mechanism could be responsible for the emergence of gravity in extensions of Einstein theory, with a suitable low energy limit. In this scenario, at high energies, symmetry restoration could ‘turn off’ gravity, with dramatic implications for cosmology and quantum gravity. The sense in which gravity is muted depends on the details of the implementation. In the most extreme case gravity’s dynamical degrees of freedom would only be unleashed after the Higgs field acquires a non-trivial vacuum expectation value, with gravity reduced to a topological field theory in the symmetric phase. We might also identify the Higgs and the Brans–Dicke fields in such a way that in the unbroken phase Newton’s constant vanishes, decoupling matter and gravity. We discuss the broad implications of these scenarios. (letter)

  17. Autism genes keep turning up chromatin.

    Science.gov (United States)

    Lasalle, Janine M

    2013-06-19

    Autism-spectrum disorders (ASD) are complex genetic disorders collectively characterized by impaired social interactions and language as well as repetitive and restrictive behaviors. Of the hundreds of genes implicated in ASD, those encoding proteins acting at neuronal synapses have been most characterized by candidate gene studies. However, recent unbiased genome-wide analyses have turned up a multitude of novel candidate genes encoding nuclear factors implicated in chromatin remodeling, histone demethylation, histone variants, and the recognition of DNA methylation. Furthermore, the chromatin landscape of the human genome has been shown to influence the location of de novo mutations observed in ASD as well as the landscape of DNA methylation underlying neurodevelopmental and synaptic processes. Understanding the interactions of nuclear chromatin proteins and DNA with signal transduction pathways and environmental influences in the developing brain will be critical to understanding the relevance of these ASD candidate genes and continued uncovering of the "roots" of autism etiology.

  18. Introduction: The Participatory Turn in Urbanism

    Directory of Open Access Journals (Sweden)

    Maroš Krivý

    2014-08-01

    Full Text Available This issue of Footprint examines the recent participatory turn in urban planning and urban design. It discusses the co-opting of participatory processes by planning departments, the systematic disregard of inequalities, and the empowering of the market resulting from the ‘anti-statism’ present in many participatory schemes.What is the relationship between the institutionalisation of participation and the practices of autonomy, self-organisation, and inclusion? When and how does genuine empowerment of collectives take place? Does the demand for the empowerment of local organisations and communities strengthen the market forces at the expense of central government?This issue attempts to problematise ‘participation’, to call attentions to some of its shortcomings, deficits, and limitations, not in order to necessarily bypass the demand for the democratisation of the urban, but in order to rectify and strengthen it.

  19. Turning Video Resource Management into Cloud Computing

    Directory of Open Access Journals (Sweden)

    Weili Kou

    2016-07-01

    Full Text Available Big data makes cloud computing more and more popular in various fields. Video resources are very useful and important to education, security monitoring, and so on. However, issues of their huge volumes, complex data types, inefficient processing performance, weak security, and long times for loading pose challenges in video resource management. The Hadoop Distributed File System (HDFS is an open-source framework, which can provide cloud-based platforms and presents an opportunity for solving these problems. This paper presents video resource management architecture based on HDFS to provide a uniform framework and a five-layer model for standardizing the current various algorithms and applications. The architecture, basic model, and key algorithms are designed for turning video resources into a cloud computing environment. The design was tested by establishing a simulation system prototype.

  20. The experience turn as ‘bandwagon’

    DEFF Research Database (Denmark)

    Fuglsang, Lars; Eide, Dorthe

    2013-01-01

    further central processes, namely appropriation and narrowing the workspace. One Norwegian and one Danish network are studied using a case methodology. They are two rural networks of mainly small tourism firms. The empirical study confirms and illustrates how the bandwagon effect involves these three core......This paper uses the bandwagon metaphor to analyse, in two rural contexts, how small tourism firms become engaged in the idea of the experience economy and how the idea is turned into practice through network formation and innovation. In developing a practice-based approach we use the bandwagon...... metaphor to conceptualize network formation and innovation in terms of a ‘journey’. Following the practice-based literature on bandwagons, the journey starts by labelling an idea that is broad enough to give meaning to, and pull together, a number of diverse supporters. The journey also depends on two...

  1. Turned Back: Mad Men as Intermedial Melodrama

    Directory of Open Access Journals (Sweden)

    Monique Rooney

    2012-09-01

    Full Text Available This essay draws on definitions of gesture (Giorgio Agamben and Peter Brooks and catachresis (Peter Brooks, Jacques Derrida to examine the primacy of non-verbal signifiers as communicators of meaning in AMC’s Mad Men. Beginning with an analysis of Mad Men’s credit sequence, it draws attention to Mad Men’s use of gesture and catachresis in relation to melodrama’s privileging of non-verbal and naturalistic expression and its persistence as an intermedial mode that has moved back and forth between various media (theatre, novel, cinema, television and now digital formats. It argues that Mad Men’s melodramatic aesthetic is one that obliquely, and via a gestural and rhetorical ‘turned back’, communicates its relation to the past and the present.

  2. Exact 2-point function in Hermitian matrix model

    International Nuclear Information System (INIS)

    Morozov, A.; Shakirov, Sh.

    2009-01-01

    J. Harer and D. Zagier have found a strikingly simple generating function [1,2] for exact (all-genera) 1-point correlators in the Gaussian Hermitian matrix model. In this paper we generalize their result to 2-point correlators, using Toda integrability of the model. Remarkably, this exact 2-point correlation function turns out to be an elementary function - arctangent. Relation to the standard 2-point resolvents is pointed out. Some attempts of generalization to 3-point and higher functions are described.

  3. Turn-by-Turn Imaging of the Transverse Beam Profile in PEP-II

    Energy Technology Data Exchange (ETDEWEB)

    Fisher, Alan A.; Petree, Mark; /SLAC

    2006-12-18

    During injection or instability, the transverse profile of an individual bunch in a storage ring can change significantly in a few turns. However, most synchrotron-light imaging techniques are not designed for this time scale. We have developed a novel diagnostic that enhances the utility of a fast gated camera by adding, inexpensively, some features of a dual-axis streak camera, in order to watch the turn-by-turn evolution of the transverse profile, in both x and y. The beam's elliptical profile is reshaped using cylindrical lenses to form a tall and narrow ellipse--essentially the projection of the full ellipse onto one transverse axis. We do this projection twice, by splitting the beam into two paths at different heights, and rotating the ellipse by 90{sup o} on one path. A rapidly rotating mirror scans these vertical ''pencils'' of light horizontally across the photocathode of the camera, which is gated for 3 ns on every Nth ring turn. A single readout of the camera captures 100 images, looking like a stroboscopic photograph of a moving object. We have observed the capture of injected charge into a bunch and the rapid change of beam size at the onset of a fast instability.

  4. Assessing lexical, syntactic, and conceptual turn-by-turn alignment in conversations involving conflict and deception

    DEFF Research Database (Denmark)

    Duran, Nicholas; Fusaroli, Riccardo; Paxton, Alexandra

    2015-01-01

    -based NLP tools, the procedure begins by taking conversational partners' turns and converting each into a lemmatized sequence of words, assigning part-of-speech tags and computing high-dimensional semantic vectors per each utterance. Words and part-of-speech tags are further sequenced into n-g! rams...

  5. Turning to Ontology in STS? Turning to STS through ‘Ontology’

    NARCIS (Netherlands)

    van Heur, B.; Leydesdorff, L.; Wyatt, S.

    2012-01-01

    We examine the evidence for the claim of an ‘ontological turn’ in science and technology studies (STS). Despite an increase in references to ‘ontology’ in STS since 1989, we show that there has not so much been an ontological turn as multiple discussions deploying the language of ontology,

  6. Turn me on! Using the “Internet of Things” to turn things on and off

    CSIR Research Space (South Africa)

    Butgereit, L

    2011-10-01

    Full Text Available to the Internet. There are many examples of things posting their status on Twitter and allowing uni-directional access. TurnMeOn is an example of allowing bidirectional access between people and things using Internet protocols. Users can query the status of a...

  7. Citizen Action Can Turn Things Around.

    Science.gov (United States)

    Gardner, John W.

    In this document, the author points out that Americans have lost confidence in the government and political processes and shows how Common Cause can help restore trust in our institutions. Over the years, since the signing of the Constitution, Americans have believed that their political system was one in which they had a voice and that the system…

  8. Mimicry by asx- and ST-turns of the four main types of beta-turn in proteins.

    Science.gov (United States)

    Duddy, William J; Nissink, J Willem M; Allen, Frank H; Milner-White, E James

    2004-11-01

    Hydrogen-bonded beta-turns in proteins occur in four categories: type I (the most common), type II, type II', and type I'. Asx-turns resemble beta-turns, in that both have an NH. . .OC hydrogen bond forming a ring of 10 atoms. Serine and threonine side chains also commonly form hydrogen-bonded turns, here called ST-turns. Asx-turns and ST-turns can be categorized into four classes, based on side chain rotamers and the conformation of the central turn residue, which are geometrically equivalent to the four types of beta-turns. We propose asx- and ST-turns be named using the type I, II, I', and II' beta-turn nomenclature. Using this, the frequency of occurrence of both asx- and ST-turns is: type II' > type I > type II > type I', whereas for beta-turns it is type I > type II > type I' > type II'. Almost all type II asx-turns occur as a recently described three residue feature named an asx-nest.

  9. Ultra-precision turning of complex spiral optical delay line

    Science.gov (United States)

    Zhang, Xiaodong; Li, Po; Fang, Fengzhou; Wang, Qichang

    2011-11-01

    Optical delay line (ODL) implements the vertical or depth scanning of optical coherence tomography, which is the most important factor affecting the scanning resolution and speed. The spinning spiral mirror is found as an excellent optical delay device because of the high-speed and high-repetition-rate. However, it is one difficult task to machine the mirror due to the special shape and precision requirement. In this paper, the spiral mirror with titled parabolic generatrix is proposed, and the ultra-precision turning method is studied for its machining using the spiral mathematic model. Another type of ODL with the segmental shape is also introduced and machined to make rotation balance for the mass equalization when scanning. The efficiency improvement is considered in details, including the rough cutting with the 5- axis milling machine, the machining coordinates unification, and the selection of layer direction in turning. The onmachine measuring method based on stylus gauge is designed to analyze the shape deviation. The air bearing is used as the measuring staff and the laser interferometer sensor as the position sensor, whose repeatability accuracy is proved up to 10nm and the stable feature keeps well. With this method developed, the complex mirror with nanometric finish of 10.7nm in Ra and the form error within 1um are achieved.

  10. Improved Turn-on Characteristics of Fast High Current Thyristors

    CERN Document Server

    Ducimetière, L; Vossenberg, Eugène B

    1999-01-01

    The beam dumping system of CERN's Large Hadron Collider (LHC) is equipped with fast solid state closing switches, designed for a hold-off voltage of 30 kV and a quasi half sine wave current of 20 kA, with 3 ms rise time, a maximum di/dt of 12 kA/ms and 2 ms fall time. The design repetition rate is 20 s. The switch is composed of ten Fast High Current Thyristors (FHCT’s), which are modified symmetric 4.5 kV GTO thyristors of WESTCODE. Recent studies aiming at improving the turn-on delay, switching speed and at decreasing the switch losses, have led to test an asymmetric not fully optimised GTO thyristor of WESTCODE and an optimised device of GEC PLESSEY Semiconductor (GPS), GB. The GPS FHCT, which gave the best results, is a non irradiated device of 64 mm diameter with a hold-off voltage of 4.5 kV like the symmetric FHCT. Tests results of the GPS FHCT show a reduction in turn-on delay of 40 % and in switching losses of almost 50 % with respect to the symmetric FHCT of WESTCODE. The GPS device can sustain an i...

  11. Predicting turns in proteins with a unified model.

    Directory of Open Access Journals (Sweden)

    Qi Song

    Full Text Available MOTIVATION: Turns are a critical element of the structure of a protein; turns play a crucial role in loops, folds, and interactions. Current prediction methods are well developed for the prediction of individual turn types, including α-turn, β-turn, and γ-turn, etc. However, for further protein structure and function prediction it is necessary to develop a uniform model that can accurately predict all types of turns simultaneously. RESULTS: In this study, we present a novel approach, TurnP, which offers the ability to investigate all the turns in a protein based on a unified model. The main characteristics of TurnP are: (i using newly exploited features of structural evolution information (secondary structure and shape string of protein based on structure homologies, (ii considering all types of turns in a unified model, and (iii practical capability of accurate prediction of all turns simultaneously for a query. TurnP utilizes predicted secondary structures and predicted shape strings, both of which have greater accuracy, based on innovative technologies which were both developed by our group. Then, sequence and structural evolution features, which are profile of sequence, profile of secondary structures and profile of shape strings are generated by sequence and structure alignment. When TurnP was validated on a non-redundant dataset (4,107 entries by five-fold cross-validation, we achieved an accuracy of 88.8% and a sensitivity of 71.8%, which exceeded the most state-of-the-art predictors of certain type of turn. Newly determined sequences, the EVA and CASP9 datasets were used as independent tests and the results we achieved were outstanding for turn predictions and confirmed the good performance of TurnP for practical applications.

  12. Now, It's Your Turn: How You Can Take Medicine Safely

    Science.gov (United States)

    ... turn Javascript on. Feature: Taking Medicines Safely Now, It's Your Turn: How You Can Take Medicine Safely ... medicine. The pharmacist has filled the prescription. Now it's up to you to take the medicine safely. ...

  13. As the Egg Turns: Monitoring Egg Attendance Behavior in Wild Birds Using Novel Data Logging Technology

    Science.gov (United States)

    Shaffer, Scott A.; Clatterbuck, Corey A.; Kelsey, Emma C.; Naiman, Alex D.; Young, Lindsay C.; VanderWerf, Eric A.; Warzybok, Pete; Bradley, Russell; Jahncke, Jaime; Bower, Geoff C.

    2014-01-01

    Egg turning is unique to birds and critical for embryonic development in most avian species. Technology that can measure changes in egg orientation and temperature at fine temporal scales (1 Hz) was neither readily available nor small enough to fit into artificial eggs until recently. Here we show the utility of novel miniature data loggers equipped with 3-axis (i.e., triaxial) accelerometers, magnetometers, and a temperature thermistor to study egg turning behavior in free-ranging birds. Artificial eggs containing egg loggers were deployed in the nests of three seabird species for 1–7 days of continuous monitoring. These species (1) turned their eggs more frequently (up to 6.5 turns h−1) than previously reported for other species, but angular changes were often small (1–10° most common), (2) displayed similar mean turning rates (ca. 2 turns h−1) despite major differences in reproductive ecology, and (3) demonstrated distinct diurnal cycling in egg temperatures that varied between 1.4 and 2.4°C. These novel egg loggers revealed high-resolution, three-dimensional egg turning behavior heretofore never measured in wild birds. This new form of biotechnology has broad applicability for addressing fundamental questions in avian breeding ecology, life history, and development, and can be used as a tool to monitor birds that are sensitive to disturbance while breeding. PMID:24887441

  14. Reducing surface roughness by optimising the turning parameters

    Directory of Open Access Journals (Sweden)

    Senthil Kumar, K.

    2013-08-01

    Full Text Available Modern manufacturers worldwide look for the cheapest quality-manufactured machined components to compete in the market. Good surface quality is desired for the proper functioning of the parts produced. The surface quality is influenced by the cutting speed, feed rate, depth of cut, and many other parameters. In this paper, the Taguchi method a powerful tool to design optimisation for quality is used to find the optimal machining parameters for the turning operation. An orthogonal array, the signal-to-noise (S/N ratio, and the analysis of variance (ANOVA are employed to investigate the machining characteristics of super duplex stainless steel bars using uncoated carbide cutting tools. The effect of machining parameters on surface roughness was discovered. Confirmation tests were conducted at optimal conditions to compare the experimental results with the predicted values.

  15. History of Education in Canada: Historiographic "Turns" and Widening Horizons

    Science.gov (United States)

    Bruno-Jofré, Rosa

    2014-01-01

    This paper explores major historiographic "turns" in history of education with a focus, although not exclusively, on English-speaking Canada. It addresses the transformative intellectual impact of the turn toward social history on the history of education, the impact of cultural history and the linguistic turn, the reception of Michel…

  16. First turn simulations in the cooler synchrotron COSY

    International Nuclear Information System (INIS)

    Dinev, D.

    1991-07-01

    This paper is devoted to the first turn correction and related problems in particle accelerators of synchrotron type. The paper consists of two parts. The first part is a survey of the existing methods for first turn steering. The second part is entirely devoted to the first turn in the cooler synchrotron COSY which is under assembling in KFA-Julich, Germany. (orig.)

  17. Critical points in magnetic systems

    International Nuclear Information System (INIS)

    Bongaarts, A.L.M.

    1975-01-01

    The magnetical phase transitions of CsCoCl 3 .2H 2 O and CsCoCl 3 .2D 2 O are investigated by neutron diffraction techniques with special attention to the critical points in the phase diagrams. CsCoCl 3 .2H 2 O turned out to be a one-dimentional magnetic antiferromagnet with ferromagnetic and antiferromagnetic interactions. In the vicinity of the Neel point, the critical behavior in zero magnetic field could be described as a three-dimentional long range ordering, while the fluctuations in the system are one-dimensional. In the presence of a magnetic field, the behavior of the system in the critical region of the magnetic phase diagram between the Neel temperature at zero field (3.3degK) and 1.85degK, was in good agreement with the theory. Below 1.85degK, the phase transition in a magnetic field changes into a line of triple points whose end point could be identified as a tricritical point, i.e., an intersection of three critical lines. The parameters derived from observations in the neighborhood of this tricritical point obey the scaling laws but are not in numerical agreement with theoretical predictions

  18. Tomographic reconstruction of transverse phase space from turn-by-turn profile data

    CERN Document Server

    Hancock, S; Lindroos, M

    1999-01-01

    Tomographic methods have the potential for useful application in beam diagnostics. The tomographic reconstruction of transverse phase space density from turn-by-turn profile data has been studied with particular attention to the effects of dispersion and chromaticity. It is shown that the modified Algebraic Reconstruction Technique (ART) that deals successfully with the problem of non-linear motion in the longitudinal plane cannot, in general, be extended to cover the transverse case. Instead, an approach is proposed in which the effect of dispersion is deconvoluted from the measured profiles before the phase space picture is reconstructed using either the modified ART algorithm or the inverse Radon Transform. This requires an accurate knowledge of the momentum distribution of the beam and the modified ART reconstruction of longitudinal phase space density yields just such information. The method has been tested extensively with simulated data.

  19. Model-independent analysis of the Fermilab Tevatron turn-by-turn beam position monitor measurements

    Science.gov (United States)

    Petrenko, A. V.; Valishev, A. A.; Lebedev, V. A.

    2011-09-01

    Coherent transverse beam oscillations in the Tevatron were analyzed with the model-independent analysis (MIA) technique. This allowed one to obtain the model-independent values of coupled betatron amplitudes, phase advances, and dispersion function around the ring from a single dipole kick measurement. In order to solve the MIA mode mixing problem which limits the accuracy of determination of the optical functions, we have developed a new technique of rotational MIA mode untangling. The basic idea is to treat each beam position monitor (BPM) as two BPMs separated in a ring by exactly one turn. This leads to a simple criterion of MIA mode separation: the betatron phase advance between any BPM and its counterpart shifted by one turn should be equal to the betatron tune and therefore should not depend on the BPM position in the ring. Furthermore, we describe a MIA-based technique to locate vibrating magnets in a storage ring.

  20. Model-independent analysis of the Fermilab Tevatron turn-by-turn beam position monitor measurements

    Directory of Open Access Journals (Sweden)

    A. V. Petrenko

    2011-09-01

    Full Text Available Coherent transverse beam oscillations in the Tevatron were analyzed with the model-independent analysis (MIA technique. This allowed one to obtain the model-independent values of coupled betatron amplitudes, phase advances, and dispersion function around the ring from a single dipole kick measurement. In order to solve the MIA mode mixing problem which limits the accuracy of determination of the optical functions, we have developed a new technique of rotational MIA mode untangling. The basic idea is to treat each beam position monitor (BPM as two BPMs separated in a ring by exactly one turn. This leads to a simple criterion of MIA mode separation: the betatron phase advance between any BPM and its counterpart shifted by one turn should be equal to the betatron tune and therefore should not depend on the BPM position in the ring. Furthermore, we describe a MIA-based technique to locate vibrating magnets in a storage ring.

  1. Turning the tide of corneal blindness

    Directory of Open Access Journals (Sweden)

    Matthew S Oliva

    2012-01-01

    Full Text Available Corneal diseases represent the second leading cause of blindness in most developing world countries. Worldwide, major investments in public health infrastructure and primary eye care services have built a strong foundation for preventing future corneal blindness. However, there are an estimated 4.9 million bilaterally corneal blind persons worldwide who could potentially have their sight restored through corneal transplantation. Traditionally, barriers to increased corneal transplantation have been daunting, with limited tissue availability and lack of trained corneal surgeons making widespread keratoplasty services cost prohibitive and logistically unfeasible. The ascendancy of cataract surgical rates and more robust eye care infrastructure of several Asian and African countries now provide a solid base from which to dramatically expand corneal transplantation rates. India emerges as a clear global priority as it has the world′s largest corneal blind population and strong infrastructural readiness to rapidly scale its keratoplasty numbers. Technological modernization of the eye bank infrastructure must follow suit. Two key factors are the development of professional eye bank managers and the establishment of Hospital Cornea Recovery Programs. Recent adaptation of these modern eye banking models in India have led to corresponding high growth rates in the procurement of transplantable tissues, improved utilization rates, operating efficiency realization, and increased financial sustainability. The widespread adaptation of lamellar keratoplasty techniques also holds promise to improve corneal transplant success rates. The global ophthalmic community is now poised to scale up widespread access to corneal transplantation to meet the needs of the millions who are currently blind.

  2. Breaking New Ground with High Resolution Turn-By-Turn BPMs at the ESRF

    CERN Document Server

    Farvacque, L; Scheidt, K

    2001-01-01

    This High-Resolution, Turn-by-Turn BPM system is a low-cost extension to the existing BPM system, based on the RF-multiplexing concept, used for slow Closed-Orbit measurements. With this extension Beam Position measurements in both planes, at all (224) BPMs in the 844 m ESRF Storage Ring, for up to 2048 Orbit Turns with 1 μm resolution are performed. The data acquisition is synchronised to a single, flat 1 μs, transverse deflection kick to the 1μs beamfill in the 2.8μs revolution period. The high quality of this synchronisation, together with the good reproducibility of the deflection kick and the overall stability of the Closed Orbit beam allows to repeat the kick and acquisition in many cycles. The subsequent averaging of the data obtained in these cycles yields the 1um resolution. The latter allows lattice measurements with high precision such as the localisation of very small focussing errors and modulation in Beta values and phase advances. It also finds an unique ...

  3. Turn-Based War Chess Model and Its Search Algorithm per Turn

    Directory of Open Access Journals (Sweden)

    Hai Nan

    2016-01-01

    Full Text Available War chess gaming has so far received insufficient attention but is a significant component of turn-based strategy games (TBS and is studied in this paper. First, a common game model is proposed through various existing war chess types. Based on the model, we propose a theory frame involving combinational optimization on the one hand and game tree search on the other hand. We also discuss a key problem, namely, that the number of the branching factors of each turn in the game tree is huge. Then, we propose two algorithms for searching in one turn to solve the problem: (1 enumeration by order; (2 enumeration by recursion. The main difference between these two is the permutation method used: the former uses the dictionary sequence method, while the latter uses the recursive permutation method. Finally, we prove that both of these algorithms are optimal, and we analyze the difference between their efficiencies. An important factor is the total time taken for the unit to expand until it achieves its reachable position. The factor, which is the total number of expansions that each unit makes in its reachable position, is set. The conclusion proposed is in terms of this factor: Enumeration by recursion is better than enumeration by order in all situations.

  4. Maximum power point tracking

    International Nuclear Information System (INIS)

    Enslin, J.H.R.

    1990-01-01

    A well engineered renewable remote energy system, utilizing the principal of Maximum Power Point Tracking can be m ore cost effective, has a higher reliability and can improve the quality of life in remote areas. This paper reports that a high-efficient power electronic converter, for converting the output voltage of a solar panel, or wind generator, to the required DC battery bus voltage has been realized. The converter is controlled to track the maximum power point of the input source under varying input and output parameters. Maximum power point tracking for relative small systems is achieved by maximization of the output current in a battery charging regulator, using an optimized hill-climbing, inexpensive microprocessor based algorithm. Through practical field measurements it is shown that a minimum input source saving of 15% on 3-5 kWh/day systems can easily be achieved. A total cost saving of at least 10-15% on the capital cost of these systems are achievable for relative small rating Remote Area Power Supply systems. The advantages at larger temperature variations and larger power rated systems are much higher. Other advantages include optimal sizing and system monitor and control

  5. and γγ-turns in proteins revisited: A new set of amino acid turn-type de

    Indian Academy of Sciences (India)

    cent Protein Data Bank has nearly doubled and the number of γ-turns in a representative set of 320 proteins has in- creased over seven times since the previous analysis. β-turns (7153) and γ-turns (911) extracted from these proteins were used to derive a revised set of type-dependent amino acid positional preferences and ...

  6. and γγ-turns in proteins revisited: A new set of amino acid turn-type de

    Indian Academy of Sciences (India)

    mine, valine, glutamic acid and alanine has decreased for β-turns. Certain new amino acid preferences were observed for both turn types and individual amino acids showed turn-type dependent positional preferences. The rationale for new amino acid preferences are discussed in the light of hydrogen bonds and other.

  7. Some genus 3 curves with many points

    NARCIS (Netherlands)

    Auer, R; Top, J; Fieker, C; Kohel, DR

    2002-01-01

    We explain a naive approach towards the problem of finding genus 3 curves C over any given finite field F-q of odd characteristic, with a number of rational points close to the Hasse-Weil-Serre upper bound q+1+3[2rootq]. The method turns out to be successful at least in characteristic 3.

  8. Wittgenstein and the linguistic turn in social theory

    DEFF Research Database (Denmark)

    Hermansen, Jens Christian

    of Winch in social theory, the wider and more recent influence of Wittgenstein in areas such as technology and science studies, social theory, feminist and gender studies and conversation and discourse analysis is also considered. Historically, the readings of Wittgenstein in the social sciences have taken...... of the linguistic turn in social theory, the linguistic turn is a double-edged sword of both profound insights and limits; the claim is that the limits of the linguistic turn are the strengths of functionalist, structuralist and materialist approaches to the social sciences. The approach of the critical turn...... is to develop a more comprehensive social theory that is sensitive to these strengths and thus supersedes the limits of the linguistic turn. This paper suggests a different approach. Against the critical turn, the paper argues that the limits of the linguistic turn are identical with the very assumptions...

  9. German Atomic Energy Act turns fifty

    International Nuclear Information System (INIS)

    Schneider, Horst

    2009-01-01

    The German Atomic Energy Act entered into force on January 1, 1960. It turns fifty at the beginning of 2010. Is this a reason to celebrate or rather the opposite? Lawyers, in principle, can view old pieces of legislation from 2 perspectives: On the one hand, aged laws are treated in a spirit of veneration and are celebrated as proven. On the other hand, an anniversary of this kind can be a welcome reason for demands to abolish or, at least, fundamentally renew that law. Over the past half century, the German Atomic Energy Act went through stormy and varied phases both of a legal and a political character. Its 50 th anniversary is likely to spark off very conflicting evaluations as well. A review of legal history shows that the German or, rather, the Federal German Atomic Energy Act (AtG) was not a first-of-its-kind piece of legislation but stemmed from the 1957 EURATOM Treaty, in a way representing a latecomer of that treaty. The Atomic Energy Act experienced a number of important developments throughout its history: - In 1975, compulsory licensing of fuel element factories was introduced. - The back end of the fuel cycle, especially final storage, were incorporated in the Atomic Energy Act comprehensively first in 1976. - In 1985, legislators decided in favor of unlimited nuclear liability. - In 1994 and 1998, only some innovations in special items were introduced under the headings of environmental impact assessment and suitability for repository storage because the controversy about nuclear power did not permit a fundamental alignment towards a more comprehensive modern safety law. - The decision to opt out of the peaceful uses of nuclear power in 2002 drew the final line so far of decisions about directions of nuclear law in a major amendment. In parallel, the decisions by the Federal Constitutional Court and the Federal Administrative Court in the late 1970s and, above all, the 1980s provided important assistance which has remained valid to this day. What is

  10. A novel method for calculating the energy cost of turning during running

    Directory of Open Access Journals (Sweden)

    Hatamoto Y

    2013-05-01

    Full Text Available Yoichi Hatamoto,1 Yosuke Yamada,2 Tatsuya Fujii,3 Yasuki Higaki,3 Akira Kiyonaga,3 Hiroaki Tanaka31Graduate School of Sports and Health Science, Fukuoka University, Nanakuma Jonan-ku Fukuoka, Japan; 2The Fukuoka University Institute for Physical Activity, Nanakuma Jonan-ku Fukuoka, Japan; 3Faculty of Sports and Health Science, Fukuoka University, Nanakuma Jonan-ku Fukuoka, JapanAbstract: Although changes of direction are one of the essential locomotor patterns in ball sports, the physiological demand of turning during running has not been previously investigated. We proposed a novel approach by which to evaluate the physiological demand of turning. The purposes of this study were to establish a method of measuring the energy expenditure (EE of a 180° turn during running and to investigate the effect of two different running speeds on the EE of a 180° turn. Eleven young, male participants performed measurement sessions at two different running speeds (4.3 and 5.4 km/hour. Each measurement session consisted of five trials, and each trial had a different frequency of turns. At both running speeds, as the turn frequency increased the gross oxygen consumption (V · O2 also increased linearly (4.3 km/hour, r = 0.973; 5.4 km/hour, r = 0.996. The V · O2 of a turn at 5.4 km/hour (0.55 [SD 0.09] mL/kg was higher than at 4.3 km/hour (0.34 [SD 0.13] mL/kg (P < 0.001. We conclude that the gross V · O2 of running at a fixed speed with turns is proportional to turn frequency and that the EE of a turn is different at different running speeds. The Different Frequency Accumulation Method is a useful tool for assessing the physiological demands of complex locomotor activity.Keywords: energy expenditure, turning, turn frequency, running speed, V · O2, heart rate

  11. Diamond-turning HP-21 beryllium to achieve an optical surface

    International Nuclear Information System (INIS)

    Allen, D.K.; Hauschildt, H.W.; Bryan, J.B.

    1975-01-01

    Investigation of diamond turning on beryllium was made in anticipation of obtaining an optical finish. Although results of past experiences were poor, it was decided to continue diamond turning on beryllium beyond initial failures. By changing speed and using coolant, partial success was achieved. Tool wear was the major problem. Tests were made to establish and plot wear as a function of cutting speed and time. Slower speeds did cause lower wear rates, but at no time did wear reach an acceptable level. The machine, tools, and procedure used were chosen based on the results of preliminary attempts and on previous experience. It was unnecessary to use an air-bearing spindle because tool failure governed the best finish that could be expected. All tools of diamond composition, whether single crystal or polycrystalline, wore at unacceptable rates. Based on present technology, it must be concluded that beryllium cannot be feasibly diamond turned to achieve an optical finish. (22 fig.)

  12. Turned versus anodised dental implants: a meta-analysis.

    Science.gov (United States)

    Chrcanovic, B R; Albrektsson, T; Wennerberg, A

    2016-09-01

    The aim of this meta-analysis was to test the null hypothesis of no difference in the implant failure rates, marginal bone loss (MBL)and post-operative infection for patients being rehabilitated by turned versus anodised-surface implants, against the alternative hypothesis of a difference. An electronic search without time or language restrictions was undertaken in November 2015. Eligibility criteria included clinical human studies, either randomised or not. Thirty-eight publications were included. The results suggest a risk ratio of 2·82 (95% CI 1·95-4·06, P implants, when compared to anodised-surface implants. Sensitivity analyses showed similar results when only the studies inserting implants in maxillae or mandibles were pooled. There were no statistically significant effects of turned implants on the MBL (mean difference-MD 0·02, 95%CI -0·16-0·20; P = 0·82) in comparison to anodised implants. The results of a meta-regression considering the follow-up period as a covariate suggested an increase of the MD with the increase in the follow-up time (MD increase 0·012 mm year(-1) ), however, without a statistical significance (P = 0·813). Due to lack of satisfactory information, meta-analysis for the outcome 'post-operative infection' was not performed. The results have to be interpreted with caution due to the presence of several confounding factors in the included studies. © 2016 John Wiley & Sons Ltd.

  13. Searching for Criteria in Evaluating the Monofin Swimming Turn from the Perspective of Coaching and Improving Technique

    Science.gov (United States)

    Rejman, Marek; Borowska, Grażyna

    2008-01-01

    and glide time. Key pointsShort time and large surface of the monofin additionally hinders complexity of the turn performance by disturbance in sensing and controlling body in water. Availability of no objective data on monofin swimming turns resulted in research in the field connected with specifying parameters needed for the technique evaluation.Correct turn technique may help to improve swimming race results.The diagram constructed on the basis of the interdependency of the total turn time and the remaining recorded kinematic parameters should establish the areas of searching for mechanism of effective and efficient monofin swimming turn.The most crucial, from the coaching and improving point of view, seem to be activities which take place from the moment of feet wall contact till the first propulsive movements. Therefore, the high quality of the monofin swimming turn technique is not just a simple consequence of the fastest performance of all its component parts.The most important criteria of the quality in the monofin swimming turn technique are: striving for extending in the optimum scope of wall contact time, the time of the push-off phase and the glide time. PMID:24150136

  14. Composting of tobacco plant waste by manual turning and forced aeration system

    Directory of Open Access Journals (Sweden)

    Nonglak Saithep

    2009-05-01

    Full Text Available The efficiency of tobacco plant waste composting, by the manual turning and the forced aeration system, was compared. Tobacco plant waste, cow manure, urea fertiliser, and a compost inoculum mixture at a 100:10:0.2:0.01 ratio respectively, with 60% (w/v moisture content, were set up in piling forms. The piles of the manual turning system were provided with turning aeration by hand at intervals of 7 days during the composting process. For the forced aeration system, each pile was aerated by a 3-HP air pump with a flow rate of 19 litres min-1 for 15 minutes every morning and evening. The completely randomised design of turned and force-aerated piles was performed in triplicate. The composting activity of both systems during the composting period was measured by several parameters: temperature, pH, moisture content, C/N ratio, growth of microorganisms, cellulase activity, and nicotine degradation in the set-up piles. Both systems had similar temperature, pH, and moisture content conditions in the piles during the composting process. However, the forced aeration system was more advantageous for the growth of mesophilic and thermophilic microorganisms, for cellulase activity from cellulase-producing microorganisms, and for nicotine degradation, when compared to the manual turning system. In conclusion, the forced aeration system was more efficient than the manual turning system in composting and is a viable alternative method for the composting process.

  15. Effect of Furniture Weight on Carrying, Lifting, and Turning of Chairs and Desks among Elementary School Children

    Science.gov (United States)

    Funatsu, Kyotaro; Xiong, Jinghong; Rosyidi, Cucuk Nur

    2015-01-01

    Rearranging furniture in elementary school classrooms encourages classroom activities. In elementary schools in Indonesia and some other developing countries, usually only one style of furniture is used for all children, and the furniture is heavy and oversized for younger children. This affects their ability to carry it. The objective of this study is to investigate the effects of elementary school furniture weight and children’s age on performance of three carrying tasks (carrying a chair, lifting and turning a chair on a desk, and carrying both a chair and a desk together), from the ergonomics point of view. A total of 42 schoolchildren (ages 6–9; 17 Indonesian, 25 Japanese) participated in this study. Two types of Japanese chairs (Chair A and B, weight: 3.2 kg and 3.9 kg), one type of Indonesian chair (Chair C, weight: 5.0 kg), and two types of desks (height: 58 cm and 68 cm) were used. Indonesian chairs took significantly longer time to carry than the two Japanese chairs, and there was a significant negative relationship between age and task time for Chairs B and C, but not Chair A. Success rates for lifting and turning the chair declined as age decreased and chair weight increased, but were not significantly influenced by desk height. Success rates for carrying a chair and desk together significantly decreased with heavier furniture. Children aged six showed an extremely low success rate in almost all conditions. In conclusion, children’s ability to carry furniture is affected by their age and furniture characteristics, especially weight. In order to encourage classroom activities in elementary school, school furniture should be of appropriate weight. Supervision for younger children is required during classroom furniture arrangement. PMID:26053154

  16. Swine manure composting by means of experimental turning equipment.

    Science.gov (United States)

    Chiumenti, A; Da Borso, F; Rodar, T; Chiumenti, R

    2007-01-01

    The purpose of research was to test the effectiveness of a prototype of a turning machine and to evaluate the feasability of a farm-scale composting process of the solid fraction of swine manure. A qualitative evaluation of the process and final product was made by monitoring the following parameters: process temperature, oxygen concentration inside the biomass, gaseous emissions (CH4, CO2, NH3, N2O), respiration index, humification index, total and volatile solids, carbon and nitrogen, pH and microbial load. The prototype proved to be very effective from a technical-operational point of view. The composting process exhibited a typical time-history, characterised by a thermophilic phase followed by a curing phase [Chiumenti, A., Chiumenti, R., Diaz, L.F., Savage, G.M., Eggerth, L.L., Goldstein, N., 2005. Modern Composting Technologies. BioCycle-JG Press, Emmaus, PA, USA]. Gas emissions from compost the windrow were more intense during the active phase of the process and showed a decreasing trend from the thermophilic to the curing phase. The final compost was characterized by good qualitative characteristics, a significant level of humification [Rossi, L., Piccinini, S., 1999. La qualità agronomica dei compost derivanti da liquami suinicoli. (Agronomic quality of swine manure compost). L'informatore Agrario 38, 29-31] and no odor emissions. This method of managing manure represents an effective, low cost approach that could be an interesting opportunity for swine farms.

  17. AE Monitoring of Diamond Turned Rapidly Soldified Aluminium 443

    International Nuclear Information System (INIS)

    Onwuka, G; Abou-El-Hossein, K; Mkoko, Z

    2017-01-01

    The fast replacement of conventional aluminium with rapidly solidified aluminium alloys has become a noticeable trend in the current manufacturing industries involved in the production of optics and optical molding inserts. This is as a result of the improved performance and durability of rapidly solidified aluminium alloys when compared to conventional aluminium. Melt spinning process is vital for manufacturing rapidly solidified aluminium alloys like RSA 905, RSA 6061 and RSA 443 which are common in the industries today. RSA 443 is a newly developed alloy with few research findings and huge research potential. There is no available literature focused on monitoring the machining of RSA 443 alloys. In this research, Acoustic Emission sensing technique was applied to monitor the single point diamond turning of RSA 443 on an ultrahigh precision lathe machine. The machining process was carried out after careful selection of feed, speed and depths of cut. The monitoring process was achieved with a high sampling data acquisition system using different tools while concurrent measurement of the surface roughness and tool wear were initiated after covering a total feed distance of 13km. An increasing trend of raw AE spikes and peak to peak signal were observed with an increase in the surface roughness and tool wear values. Hence, acoustic emission sensing technique proves to be an effective monitoring method for the machining of RSA 443 alloy. (paper)

  18. Software engineering turning theory into practice

    CERN Document Server

    Jones, Robert

    1996-01-01

    The term 'Software Engineering' was coined in the mid 1960s, it is said, as a challenge to the software community to start rationalising the software production process. Software engineering is a very young discipline and this challenge still eludes LHC demands software production on a scale far beyond that previously addressed in HEP and we are relying on software engineering to allow a significant number of people address this problem collectively. This series of lectures presents the basics of software engineering from the developer's point of view. The aim is to show how individual developers can improve the quality of the software they produce while avoiding the conflict between the creative process of designing software and the organisational needs of large projects.The Laser Interferometer Gravitanional Wave Observatory (LIGO) is being constructed with a goal to detect these waves and then to use them as a new tool to explore and study The sources of gravitanional waves and techniques for detection wil...

  19. Transparent lattice characterization with gated turn-by-turn data of diagnostic bunch train

    Science.gov (United States)

    Li, Yongjun; Cheng, Weixing; Ha, Kiman; Rainer, Robert

    2017-11-01

    Methods of characterization of a storage ring's lattice have traditionally been intrusive to routine operations. More importantly, the lattice seen by particles can drift with the beam current due to collective effects. To circumvent this, we have developed a novel approach for dynamically characterizing a storage ring's lattice that is transparent to operations. Our approach adopts a dedicated filling pattern which has a short, separate diagnostic bunch train (DBT). Through the use of a bunch-by-bunch feedback system, the DBT can be selectively excited on demand. Gated functionality of a beam position monitor system is capable of collecting turn-by-turn data of the DBT, from which the lattice can then be characterized after excitation. As the DBT comprises only about one percent of the total operational bunches, the effects of its excitation are negligible to users. This approach allows us to localize the distributed quadrupolar wakefields generated in the storage ring vacuum chamber during beam accumulation. While effectively transparent to operations, our approach enables us to dynamically control the beta beat and phase beat, and unobtrusively optimize performance of the National Synchrotron Light Source-II accelerator during routine operations.

  20. The turn team: a novel strategy for reducing pressure ulcers in the surgical intensive care unit.

    Science.gov (United States)

    Still, Mary D; Cross, Linda C; Dunlap, Martha; Rencher, Rugenia; Larkins, Elizabeth R; Carpenter, David L; Buchman, Timothy G; Coopersmith, Craig M

    2013-03-01

    Pressure ulcers cause significant morbidity and mortality in the surgical intensive care unit (SICU). The purpose of this study was to determine if a dedicated team tasked with turning and repositioning all hemodynamically stable SICU patients could decrease the formation of pressure ulcers. A total of 507 patients in a 20-bed SICU in a university hospital were assessed for pressure ulcers using a point prevalence strategy, between December 2008 and September 2010, before and after implementation of a team tasked with turning and repositioning all hemodynamically stable patients every 2 hours around the clock. At baseline, when frequent turning was encouraged but not required, a total of 42 pressure ulcers were identified in 278 patients. After implementation of the turn team, a total of 12 pressure ulcers were identified in 229 patients (p < 0.0001). The preintervention group included 34 stage I and II ulcers and 8 higher stage ulcers. After implementation of the turn team, there were 7 stage I and II ulcers and 5 higher stage ulcers. The average Braden score was 16.5 in the preintervention group and 13.4 in the postintervention group (p = 0.04), suggesting that pressure ulcers were occurring in higher risk patients after implementation of the turn team. A team dedicated to turning SICU patients every 2 hours dramatically decreased the incidence of pressure ulcers. The majority of stage I and stage II ulcers appear to be preventable with an aggressive intervention aimed at pressure ulcer prevention. Copyright © 2013 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

  1. Healthcare performance turned into decision support.

    Science.gov (United States)

    Sørup, Christian Michel; Jacobsen, Peter

    2013-01-01

    The purpose of this study is to first create an overview of relevant factors directly influencing employee absence in the healthcare sector. The overview is used to further investigate the factors identified using employee satisfaction survey scores exclusively. The result of the overall objective is a management framework that allows managers to gain insight into the current status of risk factors with high influence on employee absence levels. The research consists of a quantitative literature study supported by formal and semi-formal interviews conducted at the case organisations. Employee satisfaction surveys were applied to analyse the development over time of selected factors correlated with concurrent employee absence rates. Checking for causal results, comparisons with the included published literature findings were also carried out. Four major clustered factors, three of which constitute the term "social capital", showed a high degree of connection with employee absence rates. The factors are general satisfaction, fairness, reliance and co-operation. Integrating the four elements in a management framework will provide valuable and holistic information about the determinants with regard to current levels of employee absence. The framework will be a valuable support for leaders with the authority to alter the determinants of employee absence. Since a great part of the empirical material is supplied from the healthcare sector, the results obtained could be restricted to this sector. Inclusion of data from Arbejdsmarkedets Tillaegspension (ATP) showed no deviation from the results in the healthcare sector. The product of the study is a decision support tool for leaders to cope with levels of employee absence. The framework is holistic and can prove to be a valuable tool to take a bearing of where to focus future initiatives. Gathering former observational studies in a complete overview embracing many relevant factors that influence sickness absence has not yet

  2. Anticipation in turn-taking: mechanisms and information sources.

    Science.gov (United States)

    Riest, Carina; Jorschick, Annett B; de Ruiter, Jan P

    2015-01-01

    During conversations participants alternate smoothly between speaker and hearer roles with only brief pauses and overlaps. There are two competing types of accounts about how conversationalists accomplish this: (a) the signaling approach and (b) the anticipatory ('projection') approach. We wanted to investigate, first, the relative merits of these two accounts, and second, the relative contribution of semantic and syntactic information to the timing of next turn initiation. We performed three button-press experiments using turn fragments taken from natural conversations to address the following questions: (a) Is turn-taking predominantly based on anticipation or on reaction, and (b) what is the relative contribution of semantic and syntactic information to accurate turn-taking. In our first experiment we gradually manipulated the information available for anticipation of the turn end (providing information about the turn end in advance to completely removing linguistic information). The results of our first experiment show that the distribution of the participants' estimation of turn-endings for natural turns is very similar to the distribution for pure anticipation. We conclude that listeners are indeed able to anticipate a turn-end and that this strategy is predominantly used in turn-taking. In Experiment 2 we collected purely reacted responses. We used the distributions from Experiments 1 and 2 together to estimate a new dependent variable called Reaction Anticipation Proportion. We used this variable in our third experiment where we manipulated the presence vs. absence of semantic and syntactic information by low-pass filtering open-class and closed class words in the turn. The results suggest that for turn-end anticipation, both semantic and syntactic information are needed, but that the semantic information is a more important anticipation cue than syntactic information.

  3. [Study of beta-turns in globular proteins].

    Science.gov (United States)

    Amirova, S R; Milchevskiĭ, Iu V; Filatov, I V; Esipova, N G; Tumanian, V G

    2005-01-01

    The formation of beta-turns in globular proteins has been studied by the method of molecular mechanics. Statistical method of discriminant analysis was applied to calculate energy components and sequences of oligopeptide segments, and after this prediction of I type beta-turns has been drawn. The accuracy of true positive prediction is 65%. Components of conformational energy considerably affecting beta-turn formation were delineated. There are torsional energy, energy of hydrogen bonds, and van der Waals energy.

  4. Travel Time Model for Right-Turning Vehicles of Secondary Street at Unsignalized Intersections

    Directory of Open Access Journals (Sweden)

    Feng Yu-Qin

    2013-01-01

    Full Text Available The travel time of right-turning vehicles on secondary street at unsignalized intersection is discussed in this paper. Under the assumption that the major-street through vehicles’ headway follows Erlang distribution and secondary-street right-turning vehicles’ headway follows Poisson distribution. The right-turning vehicles travel time model is established on the basis of gap theory and M/G/1 queue theory. Comparison is done with the common model based on the assumption that the major-street vehicles’ headway follows Poisson distribution. An intersection is selected to verify each model. The results show that the model established in this paper has stronger applicability, and its most relative error is less than 15%. In addition, the sensitivity analysis has been done. The results show that right-turning flow rate and major-street flow rate have a significant impact on the travel time. Hence, the methodology for travel time of right-turning vehicles at unsignalized intersection proposed in this paper is effective and applicable.

  5. Liking Health Reform But Turned Off By Toxic Politics.

    Science.gov (United States)

    Jacobs, Lawrence R; Mettler, Suzanne

    2016-05-01

    Six years after the Affordable Care Act (ACA) became law, the number of nonelderly Americans with health insurance has expanded by twenty million, and the uninsurance rate has declined nearly 9 percentage points. Nevertheless, public opinion about the law remains deeply divided. We investigated how individuals may be experiencing and responding to health reform implementation by analyzing three waves of a panel study we conducted in 2010, 2012, and 2014. While public opinion about the ACA remains split (45.6 percent unfavorable and 36.2 percent favorable), there have been several detectable shifts. The share of respondents believing that reform had little or no impact on access to health insurance or medical care diminished by 18 percentage points from 2010 to 2014, while those considering reform to have some or a great impact increased by 19 percentage points. Among individuals who held unfavorable views toward the law in 2010, the percentage who supported repeal-while still high, at 72 percent-shrank by 9 percentage points from 2010 to 2014. We found that party affiliation and distrust in government were influential factors in explaining the continuing divide over the law. The ACA has delivered discernible benefits, and some Americans are increasingly recognizing that it is improving access to health insurance and medical care. Project HOPE—The People-to-People Health Foundation, Inc.

  6. The impact of a knowledge translation intervention employing educational outreach and a point-of-care reminder tool vs standard lay health worker training on tuberculosis treatment completion rates: study protocol for a cluster randomized controlled trial.

    Science.gov (United States)

    Puchalski Ritchie, Lisa M; van Lettow, Monique; Makwakwa, Austine; Chan, Adrienne K; Hamid, Jemila S; Kawonga, Harry; Martiniuk, Alexandra L C; Schull, Michael J; van Schoor, Vanessa; Zwarenstein, Merrick; Barnsley, Jan; Straus, Sharon E

    2016-09-07

    Despite availability of effective treatment, tuberculosis (TB) remains an important cause of morbidity and mortality globally, with low- and middle-income countries most affected. In many such settings, including Malawi, the high burden of disease and severe shortage of skilled healthcare workers has led to task-shifting of outpatient TB care to lay health workers (LHWs). LHWs improve access to healthcare and some outcomes, including TB completion rates, but lack of training and supervision limit their impact. The goals of this study are to improve TB care provided by LHWs in Malawi by refining, implementing, and evaluating a knowledge translation strategy designed to address a recognized gap in LHWs' TB and job-specific knowledge and, through this, to improve patient outcomes. We are employing a mixed-methods design that includes a pragmatic cluster randomized controlled trial and a process evaluation using qualitative methods. Trial participants will include all health centers providing TB care in four districts in the South East Zone of Malawi. The intervention employs educational outreach, a point-of-care reminder tool, and a peer support network. The primary outcome is proportion of treatment successes, defined as the total of TB patients cured or completing treatment, with outcomes taken from Ministry of Health treatment records. With an alpha of 0.05, power of 0.80, a baseline treatment success of 0.80, intraclass correlation coefficient of 0.1 based on our pilot study, and an estimated 100 clusters (health centers providing TB care), a minimum of 6 patients per cluster is required to detect a clinically significant 0.10 increase in the proportion of treatment successes. Our process evaluation will include interviews with LHWs and patients, and a document analysis of LHW training logs, quarterly peer trainer meetings, and mentorship meeting notes. An estimated 10-15 LHWs and 10-15 patients will be required to reach saturation in each of 2 planned interview

  7. SU-F-T-15: Evaluation of 192Ir, 60Co and 169Yb Sources for High Dose Rate Prostate Brachytherapy Inverse Planning Using An Interior Point Constraint Generation Algorithm

    Energy Technology Data Exchange (ETDEWEB)

    Mok Tsze Chung, E; Aleman, D [University of Toronto, Toronto, Ontario (Canada); Safigholi, H; Nicolae, A; Davidson, M; Ravi, A; Song, W [Odette Cancer Centre, Sunnybrook Health Sciences Centre, Toronto, Ontario (Canada)

    2016-06-15

    Purpose: The effectiveness of using a combination of three sources, {sup 60}Co, {sup 192}Ir and {sup 169}Yb, is analyzed. Different combinations are compared against a single {sup 192}Ir source on prostate cancer cases. A novel inverse planning interior point algorithm is developed in-house to generate the treatment plans. Methods: Thirteen prostate cancer patients are separated into two groups: Group A includes eight patients with the prostate as target volume, while group B consists of four patients with a boost nodule inside the prostate that is assigned 150% of the prescription dose. The mean target volume is 35.7±9.3cc and 30.6±8.5cc for groups A and B, respectively. All patients are treated with each source individually, then with paired sources, and finally with all three sources. To compare the results, boost volume V150 and D90, urethra Dmax and D10, and rectum Dmax and V80 are evaluated. For fair comparison, all plans are normalized to a uniform V100=100. Results: Overall, double- and triple-source plans were better than single-source plans. The triple-source plans resulted in an average decrease of 21.7% and 1.5% in urethra Dmax and D10, respectively, and 8.0% and 0.8% in rectum Dmax and V80, respectively, for group A. For group B, boost volume V150 and D90 increased by 4.7% and 3.0%, respectively, while keeping similar dose delivered to the urethra and rectum. {sup 60}Co and {sup 192}Ir produced better plans than their counterparts in the double-source category, whereas {sup 60}Co produced more favorable results than the remaining individual sources. Conclusion: This study demonstrates the potential advantage of using a combination of two or three sources, reflected in dose reduction to organs-at-risk and more conformal dose to the target. three sources, reflected in dose reduction to organs-at-risk and more conformal dose to the target. Our results show that {sup 60}Co, {sup 192}Ir and {sup 169}Yb produce the best plans when used simultaneously and

  8. Laterality of the lower limbs and carving turns

    Directory of Open Access Journals (Sweden)

    F Vaverka

    2010-06-01

    Full Text Available The aim of this study is to discover whether the lateral preference of the lower limbs influences the execution of successive carving turns or not. Six skilled skiers (men, right lower limb preference, age 26.5±1.61 years old, height 1.80±0.04 m, body weight 78.83±5.46 kg executed 30 (18 left, 12 right symmetrical carving turns. Kinetic analysis of the final vertical component of reaction force FZ(t measured dynamometrically provided the information about the time of initiation and steering phases of the turn and the maximum force, average force and force impulse. Differences between right and left turns are not statistically significant. Factual analyses of the magnitude of measured variables confirmed that left turns were found to have a longer duration, a shorter initiation and longer steering phase, and higher level of produced force and force impulse in comparison with right turns. Based on the results it can be concluded that the turns where the outer leg is the preferred limb are preferentially used to regulate the speed of the ride. The study of laterality in symmetrical carving turns has proven that lateral preference of lower extremities influences the execution of the turn also by expert skiers.

  9. The Effect of a Textured Insole on Symmetry of Turning

    Directory of Open Access Journals (Sweden)

    Etem Curuk

    2018-01-01

    Full Text Available Turning while walking is a common daily activity. Individuals with unilateral impairment frequently perform turns asymmetrically. The purpose of the study was to investigate the effect of a discomfort-inducing textured insole on symmetry of turning. Nine healthy individuals performed turns to the right while walking with no insole, immediately after the insole was inserted in the right shoe, and after walking for six minutes with the insole. The duration of turning, displacements of pelvic markers, and perceived level of discomfort were evaluated. Utilizing the insole was associated with the increased level of perceived discomfort (p<0.05. Moreover, using the insole was linked to changes in the displacement of two pelvic markers and larger asymmetry index while turning immediately after the insole was inserted in the right shoe as compared to no insole condition (p<0.05. The duration of right turning increased immediately after the insole was inserted (p<0.05 and after walking with the insole for six minutes. The results indicate that the textured insole creates asymmetry of turning in healthy individuals. The outcome provides a background for future studies focused on using a textured insole to minimize the asymmetry of turning commonly seen in individuals with unilateral impairment.

  10. The machinability of nickel-based alloys in high-pressure jet assisted (HPJA turning

    Directory of Open Access Journals (Sweden)

    D. Kramar

    2013-10-01

    Full Text Available Due to their mechanical, thermal and chemical properties, nickel-based alloys are generally included among materials that are hard to machine. An experimental study has been performed to investigate the capabilities of conventional and high-pressure jet assisted (HPJA turning of hard-to-machine materials, namely Inconel 718. The capabilities of different hard turning procedures are compared by means of chip breakability. The obtained results show that HPJA method offers a significant increase in chip breakability, under the same cutting conditions (cutting speed, feed rate, depth of cut.

  11. INFLUENCE OF THE TYPE OF INSERTS ON DIMENSIONAL ACCURACY IN TURNING PROCESS

    Directory of Open Access Journals (Sweden)

    Pavel POLÁK

    2015-07-01

    Full Text Available This article is aimed to demonstrate the effect of cutting material and geometry of inserts chip breaker for dimensional accuracy in turning. The experiment is aimed on measuring compliance with dimensional accuracy in turning of samples from steel 11 523 at a constant feed rate and depth of cut, with varying spindle speeds. Machining was performed by using a different types of replaceable inserts. The measurement results will be evaluated in terms of the impact of differ-ent geometry characteristics and changing speeds spindle.

  12. Turn-taking cue delays in human-robot communication

    NARCIS (Netherlands)

    Cuijpers, R. H.; Van Den Goor, V. J.P.

    2017-01-01

    Fluent communication between a human and a robot relies on the use of effective turn-taking cues. In human speech staying silent after a sequence of utterances is usually accompanied by an explicit turnyielding cue to signal the end of a turn. Here we study the effect of the timing of four

  13. Synthesis of conformationally restricted beta-turn mimics

    NARCIS (Netherlands)

    IJsselstijn, M.

    2006-01-01

    This thesis aims at developing methods for introducing conformational restriction in Beta-turns, the turn elements present in Beta-sheets. A conformationally restricted peptide might either be formed via incorporation of a bridging diamino acids in a growing peptide chain, or via covalent bond

  14. A Cognitive Analysis of Truck Drivers’ Right-hand Turns

    DEFF Research Database (Denmark)

    Sieker, Tobias Grønborg; G. Skulason, Thorgeir; Sletting, Kristian

    2015-01-01

    This paper presents an investigation of truck drivers’ performance during right-hand turns performed in intersections with traffic lights in order to elicit the truck drivers’ domain, decision-making processes, and the strategies used while executing the turn. To gain knowledge about this, a truc...

  15. Fast Turn-off Mine Transient Electromagnetic Transmitter System

    Directory of Open Access Journals (Sweden)

    ZHENG Xiao-Liang

    2014-05-01

    Full Text Available For solving problems such as short turn-off time, high linear degree of falling edge, measurement of turn-off time and influence of primary signals for transient electromagnetic transmitter, and restrictions because of the environmental conditions of underground coal mine, this thesis aims at designing a new transient electromagnetic transmitter system suitable for coal mine. Supported by damping absorption circuit, such system applies small volume, sectional transmitting coil, with features of short turn-off time, high linear degree of current falling edge. It uses the transmitter monitoring circuit, which accurately measures turn-off time and simultaneously records the current value changes after turn-off, thus to eliminate the influence of primary field as well as to restore earlier secondary field signals for reference and finally to improve the ability to detect the shallow structure. It turns out that the new system has a shorter turn-off time, a higher linear degree of current falling and more accurate data record of turn-off current.

  16. Cutting forces during turning with variable depth of cut

    Directory of Open Access Journals (Sweden)

    M. Sadílek

    2016-03-01

    The proposed research for the paper is an experimental work – measuring cutting forces and monitoring of the tool wear on the cutting edge. It compares the turning where standard roughing cycle is used and the turning where the proposed roughing cycle with variable depth of cut is applied.

  17. Density of Plutonium Turnings Generated from Machining Activities

    Energy Technology Data Exchange (ETDEWEB)

    Gonzales, John Robert [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Vigil, Duane M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Jachimowski, Thomas A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Archuleta, Alonso [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Arellano, Gerald Joseph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Melton, Vince Lee [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-10-20

    The purpose of this project was to determine the density of plutonium (Pu) turnings generated from the range of machining activities, using both surrogate material and machined Pu turnings. Verify that 500 grams (g) of plutonium will fit in a one quart container using a surrogate equivalent volume and that 100 grams of Pu will fit in a one quart Savy container.

  18. Human Rights Education and the Post Secular Turn

    Science.gov (United States)

    Bowie, Bob

    2012-01-01

    This article questions whether human rights education (HRE) scholarship is responding adequately to the post secular turn in thinking about the place and nature of religion in society. Here the post secular turn is used to describe the discrediting of secularisation theory, the recognition of religion as an enduring and pervasive global cultural…

  19. Turn over management and optimization of Shangdong nuclear power plant

    International Nuclear Information System (INIS)

    Zheng Tong

    2014-01-01

    After the equipments' installation is completed, the system will carry out commissioning tests. After commissioning work is completed, the system will be transferred to temporary operation. The plant buildings and structures will be transferred to operation for management and maintenance after civil work. The turn over work is an important part of the transfer from construction to operation. The article describes the significance of the nuclear power plant turn over work, turn over organization and management mode, the workflow of system turn over from construction to commissioning (TOP), turn over form commissioning to operation (TOTO), house hand over (HHO), building hand over (BHO) of Shandong Haiyang nuclear power plant, and analyze the current lack and future improvements of turn over work. Shandong Haiyang nuclear power plant will usher in the peak period of turn over work in 2013, fully aware of the importance of the turn over work, will play a key role in the long-term stable operation of the unit. (author)

  20. An expert machine tools selection system for turning operation

    NARCIS (Netherlands)

    Tan, C.F.; Khalil, S.N.; Karjanto, J.; Wahidin, L.S.; Chen, W.; Rauterberg, G.W.M.

    2015-01-01

    The turning machining process is an important process in the manufacturing industry. It is important to select the right tool for the turning process so that the manufacturing cost will be decreased. The main objective of this research is to select the most suitable machine tools with respect to

  1. Head turning as a prominent motor symptom in status epilepticus.

    Science.gov (United States)

    Bauer, Gerhard; Broessner, Gregor; Unterberger, Iris; Walser, Gerald; Pfausler, Bettina; Trinka, Eugen

    2008-06-01

    Head and eye turning is frequently observed during seizures. Versions with tonic and/or clonic symptoms can be differentiated from smooth head deviations. Head turning as a prominent symptom of status epilepticus has not previously been reported. We present eight case reports, (7 women/1 man, mean age 41 years, median 41.5, range 10 to 74), of status epilepticus (SE), with head turning as a prominent motor symptom. Six were accompanied by continuous frontal, occipital and temporal ictal epileptiform discharges. Furthermore, two patients had absence status with rhythmic and clonic head versions. While the localizing significance of head turnings in SE is low, in our cases, the direction was away from the discharging hemisphere in all cases of focal SE regardless of whether the turning was classified as version (three cases) or deviation (three cases). In this small series of SE, the classical observation of a patient looking away from the discharging hemisphere is still valid.

  2. Experience sharing, emotional reciprocity, and turn-taking

    Directory of Open Access Journals (Sweden)

    Melisa eStevanovic

    2015-04-01

    Full Text Available In this perspective article, we consider the relationship between experience sharing and turn-taking. There is much evidence suggesting that human social interaction is permeated by two temporal organizations: (1 the sequential framework of turn-taking and (2 the concurrent framework of emotional reciprocity. From this perspective, we introduce two alternative hypotheses about how the relationship between experience sharing and turn-taking could be viewed. According to the first hypothesis, the home environment of experience sharing is in the concurrent framework of emotional reciprocity, while the motivation to share experiences is in tension with the sequential framework of turn-taking. According to the second hypothesis, then again, people’s inclination to coordinate their actions in terms of turn-taking is motivated precisely by their propensity to share experiences. We consider theoretical and empirical ideas in favor of both of these hypotheses and discuss their implications for future research.

  3. PowerPoint 2013 bible

    CERN Document Server

    Wempen, Faithe

    2013-01-01

    Master PowerPoint and improve your presentation skills with one book! In today's business climate, you need to know PowerPoint inside and out, and that's not all. You also need to be able to make a presentation that makes an impact. From using sophisticated transitions and animation in your PowerPoint presentations to interfacing in person with your audience, this information-packed book helps you succeed. Start creating professional-quality slides that captivate audiences and discover essential tips and techniques for making first-rate presentations, whether you're at a podium or

  4. 3D FEM Simulation of Flank Wear in Turning

    Science.gov (United States)

    Attanasio, Aldo; Ceretti, Elisabetta; Giardini, Claudio

    2011-05-01

    This work deals with tool wear simulation. Studying the influence of tool wear on tool life, tool substitution policy and influence on final part quality, surface integrity, cutting forces and power consumption it is important to reduce the global process costs. Adhesion, abrasion, erosion, diffusion, corrosion and fracture are some of the phenomena responsible of the tool wear depending on the selected cutting parameters: cutting velocity, feed rate, depth of cut, …. In some cases these wear mechanisms are described by analytical models as a function of process variables (temperature, pressure and sliding velocity along the cutting surface). These analytical models are suitable to be implemented in FEM codes and they can be utilized to simulate the tool wear. In the present paper a commercial 3D FEM software has been customized to simulate the tool wear during turning operations when cutting AISI 1045 carbon steel with uncoated tungsten carbide tip. The FEM software was improved by means of a suitable subroutine able to modify the tool geometry on the basis of the estimated tool wear as the simulation goes on. Since for the considered couple of tool-workpiece material the main phenomena generating wear are the abrasive and the diffusive ones, the tool wear model implemented into the subroutine was obtained as combination between the Usui's and the Takeyama and Murata's models. A comparison between experimental and simulated flank tool wear curves is reported demonstrating that it is possible to simulate the tool wear development.

  5. Turn-by-Turn and Bunch-by-Bunch Transverse Profiles of a Single Bunch in a Full Ring

    International Nuclear Information System (INIS)

    Kraus, R.; Fisher, A.S.

    2005-01-01

    The apparatus described in this paper can image the evolution of the transverse profile of a single bunch, isolated from a full PEP-II ring of 1500 bunches. Using this apparatus there are two methods of single bunch imaging; bunch-by-bunch beam profiling can image every bunch in the ring a single bunch at a time with the images of sequential bunches being in order, allowing one to see variations in beam size along a train. Turn-by-turn beam profiling images a single bunch on each successive turn it makes around the ring. This method will be useful in determining the effect that an injected bunch has on a stable bunch as the oscillations of the injected bunch damp out. Turn-by-turn imaging of the synchrotron light uses a system of lenses and mirrors to image many turns of both the major and minor axis of a single bunch across the photocathode of a gateable camera. The bunch-by-bunch method is simpler: because of a focusing mirror used in porting the light from the ring, the synchrotron light from the orbiting electrons becomes an image at a certain distance from the mirror; and since the camera does not use a lens, the photocathode is set exactly at this image distance. Bunch-by-bunch profiling has shown that in the Low Energy Ring (LER) horizontal bunch size decreases along a train. Turn-by-turn profiling has been able to image 100 turns of a single bunch on one exposure of the camera. The turn-by-turn setup has also been able to image 50 turns of the minor axis showing part of the damping process of an oscillating injected charge during a LER fill. The goal is to image the damping of oscillations of injected charge for 100 turns of both the major and minor axis throughout the damping process during trickle injection. With some changes to the apparatus this goal is within reach and will make turn-by-turn imaging a very useful tool in beam diagnostics

  6. Grey Relational Analyses for Multi-Objective Optimization of Turning S45C Carbon Steel

    International Nuclear Information System (INIS)

    Shah, A.H.A.; Azmi, A.I.; Khalil, A.N.M.

    2016-01-01

    The optimization of performance characteristics in turning process can be achieved through selection of proper machining parameters. It is well known that many researchers have successfully reported the optimization of single performance characteristic. Nevertheless, the multi-objective optimization can be difficult and challenging to be studied due to its complexity in analysis. This is because an improvement of one performance characteristic may lead to degradation of other performance characteristic. As a result, the study of multi-objective optimization in CNC turning of S45C carbon steel has been attempted in this paper through Taguchi and Grey Relational Analysis (GRA) method. Through this methodology, the multiple performance characteristics, namely; surface roughness, material removal rate (MRR), tool wear, and power consumption; can be optimized simultaneously. It appears from the experimental results that the multiple performance characteristics in CNC turning was achieved and improved through the methodology employed. (paper)

  7. Measuring Operational Success: Establishing Criteria to Benchmark the Point of Culmination

    National Research Council Canada - National Science Library

    Caraccilo, Dominic

    1997-01-01

    ... has for the establishment of criteria that measure operational success on the battlefield. This void, in-turn, impacts directly on the operational commander's capability to identify his point(s) of culmination...

  8. Comparison of Dose When Prescribed to Point A and Point H for Brachytherapy in Cervical Cancer

    Energy Technology Data Exchange (ETDEWEB)

    Gang, Ji Hyeong; Gim, Il Hwan; Hwang, Seon Boong; Kim, Woong; Im, Hyeong Seo; Gang, Jin Mook; Gim, Gi Hwan; Lee, Ah Ram [Dept. of Radiation Oncology, Korea Institute of Radiological and Medical Sciences, Seou (Korea, Republic of)

    2012-09-15

    The purpose of this study is to compare plans prescribed to point A with these prescribed to point H recommended by ABS (American Brachytherapy Society) in high dose rate intracavitary brachytherapy for cervical carcinoma. This study selected 103 patients who received HDR (High Dose Rate) brachytherapy using tandem and ovoids from March 2010 to January 2012. Point A, bladder point, and rectal point conform with Manchester System. Point H conforms with ABS recommendation. Also Sigmoid colon point, and vagina point were established arbitrarily. We examined distance between point A and point H. The percent dose at point A was calculated when 100% dose was prescribed to point H. Additionally, the percent dose at each reference points when dose is prescribed to point H and point A were calculated. The relative dose at point A was lower when point H was located inferior to point A. The relative doses at bladder, rectal, sigmoid colon, and vagina points were higher when point H was located superior to point A, and lower when point H was located inferior to point A. This study found out that as point H got located much superior to point A, the absorbed dose of surrounding normal organs became higher, and as point H got located much inferior to point A, the absorbed dose of surrounding normal organs became lower. This differences dose not seem to affect the treatment. However, we suggest this new point is worth being considered for the treatment of HDR if dose distribution and absorbed dose at normal organs have large differences between prescribed to point A and H.

  9. Point Pollution Sources Dimensioning

    Directory of Open Access Journals (Sweden)

    Georgeta CUCULEANU

    2011-06-01

    Full Text Available In this paper a method for determining the main physical characteristics of the point pollution sources is presented. It can be used to find the main physical characteristics of them. The main physical characteristics of these sources are top inside source diameter and physical height. The top inside source diameter is calculated from gas flow-rate. For reckoning the physical height of the source one takes into account the relation given by the proportionality factor, defined as ratio between the plume rise and physical height of the source. The plume rise depends on the gas exit velocity and gas temperature. That relation is necessary for diminishing the environmental pollution when the production capacity of the plant varies, in comparison with the nominal one.

  10. Development process and data management of TurnSTEP, a STEP-compliant CNC system for turning

    NARCIS (Netherlands)

    Choi, I.; Suh, S.-H; Kim, K.; Song, M.S.; Jang, M.; Lee, B.-E.

    2006-01-01

    TurnSTEP is one of the earliest STEP-compliant CNC systems for turning. Based on the STEP-NC data model formalized as ISO 14649-12 and 121, it is designed to support intelligent and autonomous control of NC machines for e-manufacturing. The present paper introduces the development process and data

  11. Surface roughness and cutting force estimation in the CNC turning using artificial neural networks

    Directory of Open Access Journals (Sweden)

    Mohammad Ramezani

    2015-04-01

    Full Text Available Surface roughness and cutting forces are considered as important factors to determine machinability rate and the quality of product. A number of factors like cutting speed, feed rate, depth of cutting and tool noise radius influence the surface roughness and cutting forces in turning process. In this paper, an Artificial Neural Network (ANN model was used to forecast surface roughness and cutting forces with related inputs, including cutting speed, feed rate, depth of cut and tool noise radius. The machined surface roughness and cutting force parameters related to input parameters are the outputs of the ANN model. In this work, 24 samples of experimental data were used to train the network. Moreover, eight other experimental tests were implemented to test the network. The study concludes that ANN was a reliable and accurate method for predicting machining parameters in CNC turning operation.

  12. Recent developments in turning hardened steels - A review

    Science.gov (United States)

    Sivaraman, V.; Prakash, S.

    2017-05-01

    Hard materials ranging from HRC 45 - 68 such as hardened AISI H13, AISI 4340, AISI 52100, D2 STL, D3 STEEL Steel etc., need super hard tool materials to machine. Turning of these hard materials is termed as hard turning. Hard turning makes possible direct machining of the hard materials and also eliminates the lubricant requirement and thus favoring dry machining. Hard turning is a finish turning process and hence conventional grinding is not required. Development of the new advanced super hard tool materials such as ceramic inserts, Cubic Boron Nitride, Polycrystalline Cubic Boron Nitride etc. enabled the turning of these materials. PVD and CVD methods of coating have made easier the production of single and multi layered coated tool inserts. Coatings of TiN, TiAlN, TiC, Al2O3, AlCrN over cemented carbide inserts has lead to the machining of difficult to machine materials. Advancement in the process of hard machining paved way for better surface finish, long tool life, reduced tool wear, cutting force and cutting temperatures. Micro and Nano coated carbide inserts, nanocomposite coated PCBN inserts, micro and nano CBN coated carbide inserts and similar developments have made machining of hardened steels much easier and economical. In this paper, broad literature review on turning of hardened steels including optimizing process parameters, cooling requirements, different tool materials etc., are done.

  13. Turn stability in beta-hairpin peptides: Investigation of peptides containing 3:5 type I G1 bulge turns.

    Science.gov (United States)

    Blandl, Tamas; Cochran, Andrea G; Skelton, Nicholas J

    2003-02-01

    The turn-forming ability of a series of three-residue sequences was investigated by substituting them into a well-characterized beta-hairpin peptide. The starting scaffold, bhpW, is a disulfide-cyclized 10-residue peptide that folds into a stable beta-hairpin with two antiparallel strands connected by a two-residue reverse turn. Substitution of the central two residues with the three-residue test sequences leads to less stable hairpins, as judged by thiol-disulfide equilibrium measurements. However, analysis of NMR parameters indicated that each molecule retains a significant folded population, and that the type of turn adopted by the three-residue sequence is the same in all cases. The solution structure of a selected peptide with a PDG turn contained an antiparallel beta-hairpin with a 3:5 type I + G1 bulge turn. Analysis of the energetic contributions of individual turn residues in the series of peptides indicates that substitution effects have significant context dependence, limiting the predictive power of individual amino acid propensities for turn formation. The most stable and least stable sequences were also substituted into a more stable disulfide-cyclized scaffold and a linear beta-hairpin scaffold. The relative stabilities remained the same, suggesting that experimental measurements in the bhpW context are a useful way to evaluate turn stability for use in protein design projects. Moreover, these scaffolds are capable of displaying a diverse set of turns, which can be exploited for the mimicry of protein loops or for generating libraries of reverse turns.

  14. Increasing protein stability by improving beta-turns.

    Science.gov (United States)

    Fu, Hailong; Grimsley, Gerald R; Razvi, Abbas; Scholtz, J Martin; Pace, C Nick

    2009-11-15

    Our goal was to gain a better understanding of how protein stability can be increased by improving beta-turns. We studied 22 beta-turns in nine proteins with 66-370 residues by replacing other residues with proline and glycine and measuring the stability. These two residues are statistically preferred in some beta-turn positions. We studied: Cold shock protein B (CspB), Histidine-containing phosphocarrier protein, Ubiquitin, Ribonucleases Sa2, Sa3, T1, and HI, Tryptophan synthetase alpha-subunit, and Maltose binding protein. Of the 15 single proline mutations, 11 increased stability (Average = 0.8 +/- 0.3; Range = 0.3-1.5 kcal/mol), and the stabilizing effect of double proline mutants was additive. On the basis of this and our previous work, we conclude that proteins can generally be stabilized by replacing nonproline residues with proline residues at the i + 1 position of Type I and II beta-turns and at the i position in Type II beta-turns. Other turn positions can sometimes be used if the phi angle is near -60 degrees for the residue replaced. It is important that the side chain of the residue replaced is less than 50% buried. Identical substitutions in beta-turns in related proteins give similar results. Proline substitutions increase stability mainly by decreasing the entropy of the denatured state. In contrast, the large, diverse group of proteins considered here had almost no residues in beta-turns that could be replaced by Gly to increase protein stability. Improving beta-turns by substituting Pro residues is a generally useful way of increasing protein stability. 2009 Wiley-Liss, Inc.

  15. Changes in autopsy rates among cancer patients and their impact on cancer statistics from a public health point of view: a longitudinal study from 1980 to 2010 with data from Cancer Registry Zurich.

    Science.gov (United States)

    Bieri, Uwe; Moch, Holger; Dehler, Silvia; Korol, Dimitri; Rohrmann, Sabine

    2015-06-01

    During the last decades, autopsy rates have dramatically decreased in many countries. The Cancer Registry Zurich, which exists since 1980, provides the opportunity to address to what extent the number of autopsies in cancer patients has changed over a longer period of time and how often autopsies provide a diagnosis of clinically undetected cancer. Data from the Cancer Registry Zurich consisting of 102,434 cancer cases among 89,933 deceased patients between 1980 and 2010 were analyzed by means of descriptive statistics. The autopsy rate declined from 60 % in 1980 to 7 % in 2010. The total number of autopsies performed decreased from 1179 in 1986 to 220 in 2010. Furthermore, there was also a decline in the rate of newly detected tumours based on autopsy information. In 1980, the rate of newly detected tumours through autopsy was 42 % compared with 2010, when the rate had declined to 17 %. A consequence of the reduced autopsy rate is the reduction of incidental findings at autopsy in cancer registration. However, this reduction has not negatively affected the total incidence of cancer. It seems that the state-of-the-art diagnostic tools used for tumour detection are sufficiently reliable, allowing the scientific community to trust the quality of data provided by cancer registries in spite of decreasing autopsy rates.

  16. Beam polarization during a Siberian snake turn-on

    International Nuclear Information System (INIS)

    Anferov, Vladimir A.

    1999-01-01

    Installing Siberian snakes in a circular proton accelerator allows one to overcome all spin depolarizing resonances even at very high energies. However, Siberian snake application at low energies is technically rather difficult. Turning snake on at some energy during acceleration would allow using Siberian snakes even in rings with low injection energies. It is shown that the beam polarization would be preserved during the snake ramp, provided that the snake is turned on in more than ten turns, and the energy is set near a half-integer Gγ

  17. Observation of diamond turned OFHC copper using Scanning Tunneling Microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Grigg, D.A.; Russell, P.E.; Dow, T.A.

    1988-12-01

    Diamond turned OFHC copper samples have been observed within the past few months using the Scanning Tunneling Microscope. Initial results have shown evidence of artifacts which may be used to better understand the diamond turning process. The STM`s high resolution capability and three dimensional data representation allows observation and study of surface features unobtainable with conventional profilometry systems. Also, the STM offers a better quantitative means by which to analyze surface structures than the SEM. This paper discusses findings on several diamond turned OFHC copper samples having different cutting conditions. Each sample has been cross referenced using STM and SEM.

  18. Generation of vertical angular momentum in single, double, and triple-turn pirouette en dehors in ballet.

    Science.gov (United States)

    Kim, Jemin; Wilson, Margaret A; Singhal, Kunal; Gamblin, Sarah; Suh, Cha-Young; Kwon, Young-Hoo

    2014-09-01

    The purpose of this study was to investigate the vertical angular momentum generation strategies used by skilled ballet dancers in pirouette en dehors. Select kinematic parameters of the pirouette preparation (stance depth, vertical center-of-mass motion range, initial shoulder line position, shoulder line angular displacement, and maximum trunk twist angle) along with vertical angular momentum parameters during the turn (maximum momentums of the whole body and body parts, and duration and rate of generation) were obtained from nine skilled collegiate ballet dancers through a three-dimensional motion analysis and compared among three turn conditions (single, double, and triple). A one-way ('turn') multivariate analysis of variance of the kinematic parameters and angular momentum parameters of the whole body and a two-way analysis of variance ('turn' × 'body') of the maximum angular momentums of the body parts were conducted. Significant 'turn' effects were observed in the kinematic/angular momentum parameters (both the preparation and the turn) (p <  0.05). As the number of turns increased, skilled dancers generated larger vertical angular momentums by predominantly increasing the rate of momentum generation using rotation of the upper trunk and arms. The trail (closing) arm showed the largest contribution to whole-body angular momentum followed by the lead arm.

  19. Safety effectiveness of pavement design treatment at intersections: Left turning vehicles and pedestrians on crosswalks

    Directory of Open Access Journals (Sweden)

    Hasina Iasmin

    2016-07-01

    Full Text Available Pedestrians are the most vulnerable road users as they are more exposed than other road users. Pedestrian safety at road intersections still remains the most vital and yet unsolved issue. One of the critical points in pedestrian safety is the occurrence of accidents between left-turning vehicle and pedestrians on crosswalks at signalized intersections. A crosswalk is a place designated for pedestrians and cyclists to cross vehicular roads safely. Drivers are expected to give priority to pedestrians or cyclists during interactions between them on the crosswalk. If a driver exhibits non-yielding behavior, the interaction will turn into a collision. This study examined the safety effect of three crosswalks designed with different materials such as red-colored material or brick pavement based on a safety performance study. The safety performance study considered left-turning driver's gap acceptance behavior and the severity of traffic conflict events between left-turning vehicles and pedestrians. The results of the study indicates that using brick pavement on a crosswalk increases the safety level of the crosswalk. Drivers at such crosswalks are more acquiescent to the priority rule.

  20. Consumed workers – disabled bodies. Historical knowledge formation after the cultural turn

    Directory of Open Access Journals (Sweden)

    Anne Klein

    2016-12-01

    Full Text Available Some recent OECD-studies tackle new psychosomatic symptoms in the context of work. So we find the paradoxical situation, that although the state of health and well-being in societies grows, statistics show growing rates of burn-out syndroms together with uneasiness, addiction and non-functioning. One in five workers suffer from a mental illness, such as depression or anxiety, and many more are struggling to cope. In a closer reading we can see, that the social-medical model still dominates this actual policy research, although the cultural model has gained growing recognition in the last fifteen years. But we find a double blank spot with relevance for historical knowledge formation: On the one side, studies on work that use the tool set of cultural studies can rarely be found. On the other side, disability studies that work with the cultural model are rarely tackling the working subject. Starting from this analytical point, this contribution wants to stimulate historical knowledge formation on the working subject. The epistemic perspective of this study is coined by the cultural model of disability; the methodology is based on the visual, the spatial and the linguistic turn. In studying historical artefacts like film scenes or juridical definitions, we can come to a closer understanding of how we conceptualise human beings. The thesis is, that during the 20th-century the changing “microphysics of power” (Foucault produced new forms of subjectivation: Either, workers tried to assimilate to the “machine rhythms” or they uttered their needs in “embodied dissent”. There are multilayered facets in between. I want to develop the argumentation that the body/mind-centering seems to be at the heart of the postfordist transformation. The article concludes by underlining the possibility to read bodies as a source, an approach Bryan S. Turner has theorized in his article “Disability and the Sociology of the Body”.

  1. Remaking "Nature". the Ecological Turn in Dutch Water Management

    NARCIS (Netherlands)

    Disco, Nil/Cornelis

    2002-01-01

    The ecological turn in water management has usually been interpreted as a political andcultural rather than technical and professional accomplishment. The dynamics of theuptake of ecological expertise into hydraulic engineering bureaucracies have not beenwell described. Focusing on the controversy

  2. ANALYSIS OF CHIP FORMATION DURING HARD TURNING THROUGH ACOUSTIC EMISSION

    Directory of Open Access Journals (Sweden)

    Miroslav Neslušan

    2012-01-01

    Full Text Available The paper deals with analysis of chip formation and related aspects of the chip formation during turning hardened steel 100Cr6. The paper draws a comparison of some aspects of the chip formation between turning annealed and hardened roll bearing steel. The results of the analysis show that there is the formation of a segmented chip in the case of hard turning. Frequency of segmentation is very high. A conventional piezoelectric dynamometer limits the frequency response to about 3.5 kHz. On the other hand, the frequency of process fluctuation may by obtained by using accelerometers or acoustic emission. This paper reports about the dynamic character of cutting process when hard turning and correlation among the calculated segmentation frequencies and the experimental analysis.

  3. Experimentation and Prediction of Temperature Rise in Turning ...

    African Journals Online (AJOL)

    Experimentation and Prediction of Temperature Rise in Turning Process using Response Surface Methodology. ... Science, Technology and Arts Research Journal. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue ...

  4. The machined surface of magnesium AZ31 after rotary turning at air cooling condition

    Science.gov (United States)

    Akhyar, G.; Purnomo, B.; Hamni, A.; Harun, S.; Burhanuddin, Y.

    2018-04-01

    Magnesium is a lightweight metal that is widely used as an alternative to iron and steel. Magnesium has been applied in the automotive industry to reduce the weight of a component, but the machining process has the disadvantage that magnesium is highly flammable because it has a low flash point. High temperature can cause the cutting tool wear and contributes to the quality of the surface roughness. The purpose of this study is to obtain the value of surface roughness and implement methods of rotary cutting tool and air cooling output vortex tube cooler to minimize the surface roughness values. Machining parameters that is turning using rotary cutting tool at speed the workpiece of (Vw) 50, 120, 160 m/min, cutting speed of rotary tool of (Vt) 25, 50, 75 m/min, feed rate of (f) 0.1, 0.15, 0.2 mm/rev, and depth of cut of 0.3 mm. Type of tool used is a carbide tool diameter of 16 mm and air cooling pressure of 6 bar. The results show the average value of the lowest surface roughness on the speed the workpiece of 80 m/min, cutting speed of rotary tool of 50 m/min, feed rate of 0.2 mm/rev, and depth of cut of 0.3 mm. While the average value of the highest surface roughness on the speed the workpiece of 160 m/min, cutting speed of rotary tool of 50 m/min, feed rate of 0.2 mm/rev, and depth of cut of 0.3 mm. The influence of machining parameters concluded the higher the speed of the workpiece the surface roughness value higher. Otherwise the higher cutting speed of rotary tool then the lower the surface roughness value. The observation on the surface of the rotary tool, it was found that no uniform tool wear which causes non-uniform surface roughness. The use of rotary cutting tool contributing to lower surface roughness values generated.

  5. Treatment of uranium turning with the controllable oxidizing process

    International Nuclear Information System (INIS)

    Shen Bingyi; Zhang Yonggang; Zhen Huikuan

    1989-02-01

    The concept, procedure and safety measures of the controllable oxidizing for uranium turning is described. The feasibility study on technological process has been made. The process provided several advantages such as: simplicity of operation, no pollution environment, safety, high efficiency and low energy consumption. The process can yield nuclear pure uranium dioxide under making no use of a great number of chemical reagent. It may supply raw material for fluoration and provide a simply method of treatment for safe store of uranium turning

  6. Learning, Teaching, and Turn Taking in the Repeated Assignment Game

    OpenAIRE

    Timothy N. Cason; Sau-Him Paul Lau; Vai-Lam Mui

    2011-01-01

    History-dependent strategies are often used to support cooperation in repeated game models. Using the indefinitely repeated common-pool resource assignment game and a perfect stranger experimental design, this paper reports novel evidence that players who have successfully used an efficiency-enhancing turn-taking strategy will teach other players in subsequent supergames to adopt this strategy. We find that subjects engage in turn taking frequently in both the Low Conflict and the High Confli...

  7. Ignition experiment in a single-turn-coil tokamak

    International Nuclear Information System (INIS)

    Carrera, R.; Driga, M.; Gully, J.H.

    1989-01-01

    A novel concept for a fusion ignition experiment, IGNITEX proposed along the lines of previous ideas for a compact thermonuclear device is analyzed. A single-turn-coil tokamak is analyzed. A single-turn-coil tokamak supplied by homopolar generators can ohmically heat a DT plasma to ignition conditions and maintain a thermally stable ignited phase for about ten energy confinement times. The IGNITEX experiment can provide a simple and relatively inexpensive way to produce and control ignited plasmas for scientific study

  8. Extended phenotype: nematodes turn ants into bird-dispersed fruits

    DEFF Research Database (Denmark)

    Hughes, D P; Kronauer, D J C; Boomsma, J J

    2008-01-01

    A recent study has discovered a novel extended phenotype of a nematode which alters its ant host to resemble ripe fruit. The infected ants are in turn eaten by frugivorous birds that disperse the nematode's eggs.......A recent study has discovered a novel extended phenotype of a nematode which alters its ant host to resemble ripe fruit. The infected ants are in turn eaten by frugivorous birds that disperse the nematode's eggs....

  9. 3D characterisation of tool wear whilst diamond turning silicon

    OpenAIRE

    Durazo-Cardenas, Isidro Sergio; Shore, Paul; Luo, X.; Jacklin, T.; Impey, S. A.; Cox, A.

    2006-01-01

    Nanometrically smooth infrared silicon optics can be manufactured by the diamond turning process. Due to its relatively low density, silicon is an ideal optical material for weight sensitive infrared (IR) applications. However, rapid diamond tool edge degradation and the effect on the achieved surface have prevented significant exploitation. With the aim of developing a process model to optimise the diamond turning of silicon optics, a series of experimental trials were devi...

  10. Development of a Low Cost MQL Setup for Turning Operations

    OpenAIRE

    Islam Sumaiya; Khandoker Noman; Izham Mohamad; Azizi Tengku; Debnath Sujan

    2017-01-01

    In this study, the effect of MQL application on the tool wear, surface roughness and chip formation in turning Aluminum alloy 6061 is investigated. Experiments were carried out by plain turning of an Aluminum bar with varying depth of cut, cutting speeds (spindle speed) and cutting environments (Dry, Wet and MQL). A newly designed, cost efficient and portable MQL setup was developed for this study. For each experimental trial, five passes were carried out in order to promote the formation of ...

  11. Compensations for increased rotational inertia during human cutting turns.

    Science.gov (United States)

    Qiao, Mu; Brown, Brian; Jindrich, Devin L

    2014-02-01

    Locomotion in a complex environment is often not steady state, but unsteady locomotion (stability and maneuverability) is not well understood. We investigated the strategies used by humans to perform sidestep cutting turns when running. Previous studies have argued that because humans have small yaw rotational moments of inertia relative to body mass, deceleratory forces in the initial velocity direction that occur during the turning step, or 'braking' forces, could function to prevent body over-rotation during turns. We tested this hypothesis by increasing body rotational inertia and testing whether braking forces during stance decreased. We recorded ground reaction force and body kinematics from seven participants performing 45 deg sidestep cutting turns and straight running at five levels of body rotational inertia, with increases up to fourfold. Contrary to our prediction, braking forces remained consistent at different rotational inertias, facilitated by anticipatory changes to body rotational speed. Increasing inertia revealed that the opposing effects of several turning parameters, including rotation due to symmetrical anterior-posterior forces, result in a system that can compensate for fourfold changes in rotational inertia with less than 50% changes to rotational velocity. These results suggest that in submaximal effort turning, legged systems may be robust to changes in morphological parameters, and that compensations can involve relatively minor adjustments between steps to change initial stance conditions.

  12. Experimental Investigation of White Layer formation in Hard Turning

    Science.gov (United States)

    Umbrello, D.; Rotella, G.; Crea, F.

    2011-05-01

    Hard turning with super hard cutting tools, like PCBN or Ceramics inserts, represents an interesting advance in the manufacturing industry, regarding the finishing of hardened steels. This innovative machining technique is considered an attractive alternative to traditional finish grinding operations because of the high flexibility, the ability to achieve higher metal removal rates, the possibility to operate without the use of coolants, and the capability to achieve comparable workpiece quality. However, the surface integrity effects of hard machining need to be taken into account due to their influence on the life of machined components. In particular, the formation of a usually undesirable white layer at the surface needs further investigation. Three different mechanisms have been proposed as main responsible of the white layer genesis: (i) microstructural phase transformation due to a rapid heating and quenching, (ii) severe plastic deformation resulting in a homogenous structure and/or a very fine grain size microstructure; (iii) surface reaction with the environment. In this research, an experimental campaign was carried out and several experimental techniques were used in order to analyzed the machined surface and to understand which of the above mentioned theories is the main cause of the white layer formation when AISI 52100 hardened steel is machined by PCBN inserts. In particular, the topography characterization has obtained by means of optical and scanning electron microscope (SEM) while microstructural phase composition and chemical characterization have been respectively detected using X-ray Diffraction (XRD) and Energy-dispersive X-ray spectroscopy (EDS) techniques. The results prove that the white layer is the result of microstructural alteration, i.e. the generation of a martensitic structure.

  13. Prediction of Cutting Force in Turning Process-an Experimental Approach

    Science.gov (United States)

    Thangarasu, S. K.; Shankar, S.; Thomas, A. Tony; Sridhar, G.

    2018-02-01

    This Paper deals with a prediction of Cutting forces in a turning process. The turning process with advanced cutting tool has a several advantages over grinding such as short cycle time, process flexibility, compatible surface roughness, high material removal rate and less environment problems without the use of cutting fluid. In this a full bridge dynamometer has been used to measure the cutting forces over mild steel work piece and cemented carbide insert tool for different combination of cutting speed, feed rate and depth of cut. The experiments are planned based on taguchi design and measured cutting forces were compared with the predicted forces in order to validate the feasibility of the proposed design. The percentage contribution of each process parameter had been analyzed using Analysis of Variance (ANOVA). Both the experimental results taken from the lathe tool dynamometer and the designed full bridge dynamometer were analyzed using Taguchi design of experiment and Analysis of Variance.

  14. Tool life and surface roughness of ceramic cutting tool when turning AISI D2 tool steel

    International Nuclear Information System (INIS)

    Wan Emri Wan Abdul Rahaman

    2007-01-01

    The tool life of physical vapor deposition (PVD) titanium nitride (TiN) coated ceramic when turning AISI D2 tool steel of hardness 54-55 HRC was investigated. The experiments were conducted at various cutting speed and feed rate combinations with constant depth of cut and under dry cutting condition. The tool life of the cutting tool for all cutting conditions was obtained. The tool failure mode and wear mechanism were also investigated. The wear mechanism that is responsible for the wear form is abrasion and diffusion. Flank wear and crater wear are the main wear form found when turning AISI D2 grade hardened steel with 54-55 HRC using KY 4400 ceramic cutting tool. Additionally catastrophic failure is observed at cutting speed of 183 m/min and feed rate of 0.16 mm/ rev. (author)

  15. Improving the secrecy rate by turning foes to allies: An auction scheme

    Science.gov (United States)

    Ma, Ya-Yan; Wang, Bao-Yun

    2015-09-01

    Security against eavesdroppers is a critical issue in cognitive radio networks (CRNs). In this paper, a scenario consisting of one primary pair and multiple secondary pairs is considered. The secondary transmitters (STs) work in half-duplex mode and they are potential eavesdroppers on the primary transmission unless they are allowed to simultaneously transmit with the primary transmitter (PT). A modified second-price sealed-bid auction scheme is employed to model the interaction between the PT and STs. With the proposed auction scheme, the hostile relationship between the PT and STs is transformed into a cooperative relationship. An iterative algorithm based on the max-min criteria is proposed to find the optimal bidding power of the STs for an access chance in the presence of multiple eavesdroppers. Numerical results show that the proposed auction scheme not only improves the PT’s security but also increases the access opportunities of the STs. Project supported by the National Natural Science Foundation of China (Grant Nos. 61271232 and 61372126) and the University Postgraduate Research and Innovation Project in Jiangsu Province, China (Grant No. CXZZ12-0472).

  16. The Gyracc : an integrated sensor for 3D rate of turn and acceleration

    NARCIS (Netherlands)

    Kooi, B.J.

    2005-01-01

    There is a need for systems that can sense motions in the 3D-space for position and orientation determination. In the biomedical field such a sensing system should ultimately be small enough for implantation in human beings

  17. Nuclear and Radiological Event Scale Turns 20. INES Helps Authorities Rate Events and Communicate Their Significance

    International Nuclear Information System (INIS)

    Verlini, Giovanni

    2011-01-01

    Originally developed in the 1990s jointly by IAEA and Nuclear Energy Agency of the Organization for Economic Co-operation and Development (OECD/NEA) and Member States experts, INES was last revised in 2008 to become a more versatile and informative tool. INES is now designed to address events associated with the transport, storage and use of radioactive material and radiation sources, whether they occur at a nuclear installation or not.

  18. The End of Points

    Science.gov (United States)

    Feldman, Jo

    2018-01-01

    Have teachers become too dependent on points? This article explores educators' dependency on their points systems, and the ways that points can distract teachers from really analyzing students' capabilities and achievements. Feldman argues that using a more subjective grading system can help illuminate crucial information about students and what…

  19. Demerit points systems.

    NARCIS (Netherlands)

    2006-01-01

    In 2012, 21 of the 27 EU Member States had some form of demerit points system. In theory, demerit points systems contribute to road safety through three mechanisms: 1) prevention of unsafe behaviour through the risk of receiving penalty points, 2) selection and suspension of the most frequent

  20. Ammonia and greenhouse gases losses from mechanically turned cattle manure windrows: A regional composting network.

    Science.gov (United States)

    Arriaga, Haritz; Viguria, Maialen; López, Diana M; Merino, Pilar

    2017-12-01

    An on-farm composting network operates in the Basque Country (northern Spain), in which solid manure produced in livestock farms (mostly dairy and beef cattle) is composted through windrow turning. This network aims to produce a valuable resource (compost) for the farmers whereas the volume of the solid manure was reduced at farm level The objective of the study was to assess the gaseous losses (NH 3 and GHG) from 6 on-farm composting windrows (either deep litter systems or solid fraction after slurry separation) after turning operations. Monitored turning events occurred 1 to 4 months after establishing the heaps on the field. Ammonia and greenhouse gas (GHG) losses were estimated by the open and close chamber techniques, respectively. Results showed overall low emission rates related to the long degradation period of the windrows. Maximum NH 3 release was at 2.0 mg m -2 d -1 after the second/third turning events. Baseline N 2 O losses were below 50 mg m -2 d -1 , with maximum rates close to 500 mg m -2 d -1 some days after turning works. Methane emissions were mostly below 100 mg m -2 d -1 , while CO 2 losses were lower than 25 g m -2 d -1 . Carbon dioxide peaks (≈250 g m -2 d -1 ) were reached after the second/third turnings. Overall, gaseous N and C losses accounted for 0.1 and 1% of the initial N and C content of the windrows, respectively. The present study concluded that two/three turning operations in aged solid manure-derived compost windrows do not have significant effects on NH 3 and GHG losses. The magnitude of the gaseous losses from on-farm composting systems is dependent on the manure management practices at farm level (e.g. moment of windrow stacking). Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Semiautomatic machine for turning inside out industrial leather gloves

    International Nuclear Information System (INIS)

    Aragón-Gonzalez, G; Cano-Blanco, M; León-Galicia, A; Medrano-Sierra, L F; Morales-Gómez, J R

    2015-01-01

    The last step in the industrial leather gloves manufacturing is to turn the inside out so that the sewing be in the inside of the glove. This work presents the design and testing of a machine for that purpose. In order to quantify the relevant variables, testing was performed with a prototype glove. The employed devices and the testing proceeding were developed experimentally. The obtained information was used to build the turning inside out machine. This machine works with pneumatic power to carry the inside out turning by means of double effect lineal actuators. It has two independent work stations that could be operated simultaneously by two persons, one in each station or in single mode operating one station by one person. The turning inside out cycle is started by means of directional control valves operated with pedals. The velocity and developed force by the actuators is controlled with typical pneumatic resources. The geometrical dimensions of the machine are: 1.15 m length; 0.71 m width and 2.15 m high. Its approximated weight is 120 kg. The air consumption is 5.4 fps by each working station with 60 psig work pressure. The turning inside out operation is 40 s for each industrial leather glove

  2. Postural hemodynamic changes after turning to prone position

    Directory of Open Access Journals (Sweden)

    Микола Віталійович Лизогуб

    2015-03-01

    Full Text Available Background of study. Prone position is one of the most complex positions for anesthesiologist as it is accompanied by several physiological changes that can lead to specific complications. Hemodynamic changes are most controversial.Aim of study was to establish hemodynamic changes in non-anaesthetized patients in prone position depending on body mass index.Material and methods. We examined central hemodynamics in 40 patients the day before surgery using thoracic rheography in supine position, in prone position 5 min after turning and in prone position 20 min after turning. Patients were divided into 2 groups according to body mass index (18-25 and 26-35.Results. Patients with normal body weight did not have any hemodynamic changes after turning to prone position. Patients with increased body weight had higher cardiac index. After turning to prone position obese patients’ cardiac output and cardiac index reduced 22% comparing with supine position. After 20 min in prone position these hemodynamic parameters were found to be reduced to the same level.Conclusion. Significant hemodynamic changes after turning from supine to prone position were revealed only in patients with increased body mass index. In these patients cardiac index in prone position was reduced by 22% comparing to supine position

  3. [Abnormal head turn in a patient with Brown's syndrome].

    Science.gov (United States)

    van Waveren, M; Krzizok, T; Besch, D

    2008-08-01

    We report on an eight-year-old boy, who was presented in our clinic because of head turn. The cause of the tortecollis (ocular or general) in this case was and still cannot be explained. Only by applying extensive prism adaptation tests it was possible to prove the ocular character of the head turn. An eight-year-old boy with Brown's syndrome was referred to us because of a head tilt to the left side. Six months previously surgery on the M. obl. superior of the right eye was performed in another clinic. No improvement of the head tilt could be observed after the operation. In addition, an exotropia became decompensated. Under a 3-day occlusion of one eye, no change of the head turn and the squint could be measured. No other cause of the head turn could be found by an orthopaedist and a paediatrist. Under a prism of 20 cm/m basis in and 10 cm/m basis against the positive vertical deviation, the head tilt decreased, so that we decided to do a second surgery. The head tilting had not resumed at one year after the surgery. Although the initial diagnostic findings ruled out an ocular cause, it was possible to lessen the head tilting with the aid of the prism adaptation test. This case study emphasises the usefulness of a prism adaptation test of several days duration in order to validate an ocular cause of head turn and to determine an adequate indication for surgery.

  4. Time-series analysis of foreign exchange rates using time-dependent pattern entropy

    Science.gov (United States)

    Ishizaki, Ryuji; Inoue, Masayoshi

    2013-08-01

    Time-dependent pattern entropy is a method that reduces variations to binary symbolic dynamics and considers the pattern of symbols in a sliding temporal window. We use this method to analyze the instability of daily variations in foreign exchange rates, in particular, the dollar-yen rate. The time-dependent pattern entropy of the dollar-yen rate was found to be high in the following periods: before and after the turning points of the yen from strong to weak or from weak to strong, and the period after the Lehman shock.

  5. Point specificity in acupuncture

    Directory of Open Access Journals (Sweden)

    Choi Emma M

    2012-02-01

    Full Text Available Abstract The existence of point specificity in acupuncture is controversial, because many acupuncture studies using this principle to select control points have found that sham acupoints have similar effects to those of verum acupoints. Furthermore, the results of pain-related studies based on visual analogue scales have not supported the concept of point specificity. In contrast, hemodynamic, functional magnetic resonance imaging and neurophysiological studies evaluating the responses to stimulation of multiple points on the body surface have shown that point-specific actions are present. This review article focuses on clinical and laboratory studies supporting the existence of point specificity in acupuncture and also addresses studies that do not support this concept. Further research is needed to elucidate the point-specific actions of acupuncture.

  6. Turn-taking in cooperative offspring care: by-product of individual provisioning behavior or active response rule?

    Science.gov (United States)

    Savage, James L; Browning, Lucy E; Manica, Andrea; Russell, Andrew F; Johnstone, Rufus A

    2017-01-01

    For individuals collaborating to rear offspring, effective organization of resource delivery is difficult because each carer benefits when the others provide a greater share of the total investment required. When investment is provided in discrete events, one possible solution is to adopt a turn-taking strategy whereby each individual reduces its contribution rate after investing, only increasing its rate again once another carer contributes. To test whether turn-taking occurs in a natural cooperative care system, here we use a continuous time Markov model to deduce the provisioning behavior of the chestnut-crowned babbler ( Pomatostomus ruficeps ), a cooperatively breeding Australian bird with variable number of carers. Our analysis suggests that turn-taking occurs across a range of group sizes (2-6), with individual birds being more likely to visit following other individuals than to make repeat visits. We show using a randomization test that some of this apparent turn-taking arises as a by-product of the distribution of individual inter-visit intervals ("passive" turn-taking) but that individuals also respond actively to the investment of others over and above this effect ("active" turn-taking). We conclude that turn-taking in babblers is a consequence of both their individual provisioning behavior and deliberate response rules, with the former effect arising through a minimum interval required to forage and travel to and from the nest. Our results reinforce the importance of considering fine-scale investment dynamics when studying parental care and suggest that behavioral rules such as turn-taking may be more common than previously thought. Caring for offspring is a crucial stage in the life histories of many animals and often involves conflict as each carer typically benefits when others contribute a greater share of the work required. One way to resolve this conflict is to monitor when other carers contribute and adopt a simple "turn-taking" rule to ensure

  7. A novel hybrid method of beta-turn identification in protein using binary logistic regression and neural network.

    Science.gov (United States)

    Asghari, Mehdi Poursheikhali; Hayatshahi, Sayyed Hamed Sadat; Abdolmaleki, Parviz

    2012-01-01

    From both the structural and functional points of view, β-turns play important biological roles in proteins. In the present study, a novel two-stage hybrid procedure has been developed to identify β-turns in proteins. Binary logistic regression was initially used for the first time to select significant sequence parameters in identification of β-turns due to a re-substitution test procedure. Sequence parameters were consisted of 80 amino acid positional occurrences and 20 amino acid percentages in sequence. Among these parameters, the most significant ones which were selected by binary logistic regression model, were percentages of Gly, Ser and the occurrence of Asn in position i+2, respectively, in sequence. These significant parameters have the highest effect on the constitution of a β-turn sequence. A neural network model was then constructed and fed by the parameters selected by binary logistic regression to build a hybrid predictor. The networks have been trained and tested on a non-homologous dataset of 565 protein chains. With applying a nine fold cross-validation test on the dataset, the network reached an overall accuracy (Qtotal) of 74, which is comparable with results of the other β-turn prediction methods. In conclusion, this study proves that the parameter selection ability of binary logistic regression together with the prediction capability of neural networks lead to the development of more precise models for identifying β-turns in proteins.

  8. Modeling of residual stress state in turning of 304L

    International Nuclear Information System (INIS)

    Valiorgue, F.; Rech, J.; Bergheau, J.M.

    2010-01-01

    Research presented in this paper aims to link machining parameters to residual stress state and helps understanding mechanisms responsible of machined surface properties modifications. The first presented works are based on an experimental campaign. They reproduce the finishing turning operation of 304L and allow observing the residual stress state evolution at the work piece surface and for an affected depth of 0.2 mm for such processes. Then, the finishing turning operation is simulated numerically in order to realize the same sensitivity study to cutting parameters. This simulation is based on an hybrid approach mixing experimental data and numerical simulation. This method allows getting round the classical difficulties of turning simulation by applying equivalent thermo mechanical loadings onto the work piece surface without modeling the material separation phenomena. Moreover the numerical model uses an hardening law taking into account dynamic recrystallization phenomena. (authors)

  9. Negotiating behavioural change: therapists' proposal turns in Cognitive Behavioural Therapy.

    Science.gov (United States)

    Ekberg, Katie; Lecouteur, Amanda

    2012-01-01

    Cognitive behavioural therapy (CBT) is an internationally recognised method for treating depression. However, many of the techniques involved in CBT are accomplished within the therapy interaction in diverse ways, and with varying consequences for the trajectory of therapy session. This paper uses conversation analysis to examine some standard ways in which therapists propose suggestions for behavioural change to clients attending CBT sessions for depression in Australia. Therapists' proposal turns displayed their subordinate epistemic authority over the matter at hand, and emphasised a high degree of optionality on behalf of the client in accepting their suggestions. This practice was routinely accomplished via three standard proposal turns: (1) hedged recommendations; (2) interrogatives; and (3) information-giving. These proposal turns will be examined in relation to the negotiation of behavioural change, and the implications for CBT interactions between therapist and client will be discussed.

  10. Modelling assessment of oil sands pit lakes turn-over potential

    International Nuclear Information System (INIS)

    Mackenzie, I.; Vandenberg, J.; Lauzon, N.; Takyi, A.

    2006-01-01

    Pit lakes form when surface mining operations are discontinued and dewatering is terminated. Their use as a treatment step for oil sands surface mining reclamation waters was discussed. The goal of the End Pit Lake Subgroup of the Cumulative Environmental Management Association is to establish guidelines that will enable operators to achieve acceptable water quality for these lakes. Although both biological and physical processes affect turn-over potential, this presentation focused on the size of pit lakes, their depth, starting lake salinity concentrations, inflow rates and inflow salinity flux. These parameters where selected because of their influence on density gradients and turn-over potential. One-dimensional and two-dimensional modelling simulations were performed to examine turnover potential for a large range of pit lake configurations and conditions. The pit lake scenarios chosen for this modelling study included a wide range of changes in 3 lake sizes (1, 4 and 8 km 2 ), 3 lake depths (5, 20 and 50 m), 2 lake starting salinities (1 and 5 parts per thousand), 2 inflow rates (2 and 10 million m 3 per year), 3 starting inflow salinity concentrations (1, 2 and 4 parts per thousand) and 2 rates of influent salinity decrease (6- and 28- year half-life). Simulations showed that autumn is the governing season for determining turn-over potential. For the scenarios examined in this study, the expelling of salt from saline water upon ice formation and the effect of fresh water loading during spring melt events were not found to be significant factors governing turn-over potential. This presentation reviewed the DYRESM, CE-QUAL-W2, and RMA models used in this study. The conclusions reached by each model was also reviewed along with ongoing follow-up work

  11. Conformational interconversions in peptide beta-turns: analysis of turns in proteins and computational estimates of barriers.

    Science.gov (United States)

    Gunasekaran, K; Gomathi, L; Ramakrishnan, C; Chandrasekhar, J; Balaram, P

    1998-12-18

    The two most important beta-turn features in peptides and proteins are the type I and type II turns, which differ mainly in the orientation of the central peptide unit. Facile conformational interconversion is possible, in principle, by a flip of the central peptide unit. Homologous crystal structures afford an opportunity to structurally characterize both possible conformational states, thus allowing identification of sites that are potentially stereochemically mobile. A representative data set of 250 high-resolution (turns that are assigned different conformational types (type I/type II) in related structures. A total of 55 examples of beta-turns were identified as possible candidates for a stereochemically mobile site. Of the 55 examples, 45 could be classified as a potential site for interconversion between type I and type II beta-turns, while ten correspond to flips from type I' to type II' structures. As a further check, the temperature factors of the central peptide unit carbonyl oxygen atom of the 55 examples were examined. The analysis reveals that the turn assignments are indeed reliable. Examination of the secondary structures at the flanking positions of the flippable beta-turns reveals that seven examples occur in the loop region of beta-hairpins, indicating that the formation of ordered secondary structures on either side of the beta-turn does not preclude local conformational variations. In these beta-turns, Pro (11 examples), Lys (nine examples) and Ser (seven examples) were most often found at the i+1 position. Glycine was found to occur overwhelmingly at position i+2 (28 examples), while Ser (seven examples) and Asn (six examples) were amongst the most frequent residues. Activation energy barriers for the interconversion between type I and type II beta-turns were computed using the peptide models Ac-Pro-Aib-NHMe and Ac-Pro-Gly-NHMe within the framework of the AM1 semi-empirical molecular orbital procedure. In order to have a uniform basis for

  12. A survey report for the turning of biped locomotion robot

    International Nuclear Information System (INIS)

    Kato, Ichiro; Takanishi, Atsuo; Kume, Etsuo.

    1992-12-01

    A mechanical design study of biped locomotion robots is going on at JAERI within the scope of the Human Acts Simulation Program (HASP). The design study at JAERI is of an arbitrarily mobile robot for inspection of nuclear facilities. A survey has been performed for collecting useful information from already existing biped locomotion robots. This is a survey report for the turning of biped locomotion robot: the WL-10R designed and developed at Waseda University. This report includes the control method of turning, machine model and control system. (author)

  13. Spatial turn and animation practices inspired by cultural anthropology

    Directory of Open Access Journals (Sweden)

    Agnieszka Wieszaczewska

    2016-09-01

    Full Text Available Spatial turn is one of the cultural turns, which have recently occurred in the humanities. It stresses the importance of issues such as space and place and can be successfully used as a theoretical perspective gaining use in thought over issues such as globalisation, transnationality, mapping but also education. In the discourses of pedagogical science space and place are considered through their multidimensional impact on education and learning. As significant concepts rooting pedagogy or pedagogy of borderland. The pedagogical reflection on space could be also used in the field of animation practices, especially in activities, which are related to place somehow colonised.

  14. Abolishment of Spontaneous Flight Turns in Visually Responsive Drosophila.

    Science.gov (United States)

    Ferris, Bennett Drew; Green, Jonathan; Maimon, Gaby

    2018-01-22

    Animals react rapidly to external stimuli, such as an approaching predator, but in other circumstances, they seem to act spontaneously, without any obvious external trigger. How do the neural processes mediating the execution of reflexive and spontaneous actions differ? We studied this question in tethered, flying Drosophila. We found that silencing a large but genetically defined set of non-motor neurons virtually eliminates spontaneous flight turns while preserving the tethered flies' ability to perform two types of visually evoked turns, demonstrating that, at least in flies, these two modes of action are almost completely dissociable. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Evaluation of cutting force uncertainty components in turning

    DEFF Research Database (Denmark)

    Axinte, Dragos Aurelian; Belluco, Walter; De Chiffre, Leonardo

    2000-01-01

    A procedure is proposed for the evaluation of those uncertainty components of a single cutting force measurement in turning that are related to the contributions of the dynamometer calibration and the cutting process itself. Based on an empirical model including errors form both sources......, the uncertainty for a single measurement of cutting force is presented, and expressions for the expected uncertainty vs. cutting parameters are proposed. This approach gives the possibility of evaluating cutting force uncertainty components in turning, for a defined range of cutting parameters, based on few...

  16. Synthetic Aperture Computation as the Head is Turned in Binaural Direction Finding

    Directory of Open Access Journals (Sweden)

    Duncan Tamsett

    2017-03-01

    Full Text Available Binaural systems measure instantaneous time/level differences between acoustic signals received at the ears to determine angles λ between the auditory axis and directions to acoustic sources. An angle λ locates a source on a small circle of colatitude (a lamda circle on a sphere symmetric about the auditory axis. As the head is turned while listening to a sound, acoustic energy over successive instantaneous lamda circles is integrated in a virtual/subconscious field of audition. The directions in azimuth and elevation to maxima in integrated acoustic energy, or to points of intersection of lamda circles, are the directions to acoustic sources. This process in a robotic system, or in nature in a neural implementation equivalent to it, delivers its solutions to the aurally informed worldview. The process is analogous to migration applied to seismic profiler data, and to that in synthetic aperture radar/sonar systems. A slanting auditory axis, e.g., possessed by species of owl, leads to the auditory axis sweeping the surface of a cone as the head is turned about a single axis. Thus, the plane in which the auditory axis turns continuously changes, enabling robustly unambiguous directions to acoustic sources to be determined.

  17. Development of Fractal Dimension and Characteristic Roughness Models for Turned Surface of Carbon Steels

    Science.gov (United States)

    Zuo, Xue; Zhu, Hua; Zhou, Yuankai; Ding, Cong; Sun, Guodong

    2016-08-01

    Relationships between material hardness, turning parameters (spindle speed and feed rate) and surface parameters (surface roughness Ra, fractal dimension D and characteristic roughness τ∗) are studied and modeled using response surface methodology (RSM). The experiments are carried out on a CNC lathe for six carbon steel material AISI 1010, AISI 1020, AISI 1030, AISI 1045, AISI 1050 and AISI 1060. The profile of turned surface and the surface roughness value are measured by a JB-5C profilometer. Based on the profile data, D and τ∗ are computed through the root-mean-square method. The analysis of variance (ANOVA) reveals that spindle speed is the most significant factors affecting Ra, while material hardness is the most dominant parameter affecting τ∗. Material hardness and spindle speed have the same influence on D. Feed rate has less effect on three surface parameters than spindle speed and material hardness. The second-order models of RSM are established for estimating Ra, D and τ∗. The validity of the developed models is approximately 80%. The response surfaces show that a surface with small Ra and large D and τ∗ can be obtained by selecting a high speed and a large hardness material. According to the established models, Ra, D and τ∗ of six carbon steels surfaces can be predicted under cutting conditions studied in this paper. The results have an instructive meaning to estimate the surface quality before turning.

  18. A Postneoliberal Turn? Variants of the Recent Penal Policy in Argentina

    Directory of Open Access Journals (Sweden)

    Maximo Sozzo

    2017-03-01

    Full Text Available This paper analysed the connection between the emergence and consolidation of a postneoliberal political program and alliance – Kirchnerism – and penal policies in Argentina. Three key moments are identified in this recent period. After the experience of an intense punitive turn during the 1990s and early 2000s, Kirchnerist political alliances tried to deploy a progressive political discourse and agenda on penal issues. Nevertheless, this initially coincided with a strong wave of penal populism ‘from below’ that continued the precedent trend towards increasing punitiviness.  Since 2005, and for a brief moment, this tendency stopped. However, after that and during the presidencies of Fernandez de Kirchner a more volatile and contradictory scenario was generated. The incarceration rate between 2002 and 2014 in Argentina grew substantially as did the rate of convictions. Meanwhile the percentage of suspended sentences as part of the total convictions and the percentage of custodial sanctions both fell. Especially in relation to incarceration, these levels of change are not as stark as those of the preceding decades. However, the trends persist. Therefore, the question of how to transcend the dynamics of the punitive turn remains a pending and urgent political subject. The article argues the importance of analysing why a punitive turn is interrupted and presents an explanation of it.

  19. OpenTURNS, an open source uncertainty engineering software

    International Nuclear Information System (INIS)

    Popelin, A.L.; Dufoy, A.

    2013-01-01

    The needs to assess robust performances for complex systems have lead to the emergence of a new industrial simulation challenge: to take into account uncertainties when dealing with complex numerical simulation frameworks. EDF has taken part in the development of an Open Source software platform dedicated to uncertainty propagation by probabilistic methods, named OpenTURNS for Open source Treatment of Uncertainty, Risk and Statistics. OpenTURNS includes a large variety of qualified algorithms in order to manage uncertainties in industrial studies, from the uncertainty quantification step (with possibilities to model stochastic dependence thanks to the copula theory and stochastic processes), to the uncertainty propagation step (with some innovative simulation algorithms as the ziggurat method for normal variables) and the sensitivity analysis one (with some sensitivity index based on the evaluation of means conditioned to the realization of a particular event). It also enables to build some response surfaces that can include the stochastic modeling (with the chaos polynomial method for example). Generic wrappers to link OpenTURNS to the modeling software are proposed. At last, OpenTURNS is largely documented to provide rules to help use and contribution

  20. Understanding the Linguistic Turn and the Quest for Meaning ...

    African Journals Online (AJOL)

    Apart from Dilthey the linguistic turn penetrated also the thought of thinkers such as Freud, Wittgenstein, Frankl, Heidegger, Habermas, Dooyeweerd and Gadamer, all of them (implicitly or explicitly) elaborated the initial criticism raised by Herder, Jacobi, Hamann, Heidegger and Gadamer against Kant's Critique of Pure ...

  1. Performances of cutting fluids in turning. Mineral oil - RM

    DEFF Research Database (Denmark)

    Axinte, Dragos Aurelian; Belluco, Walter

    1999-01-01

    Scope of the present measurement campaign is the evaluation of the cutting fluid performance. The report presents the standard routine and the results obtained when turning stainless steel and brass with a commercial vegetable based oil called RM. The methods were developed to be applicable...

  2. Performances of cutting fluids in turning. Vegetable based oil - RV

    DEFF Research Database (Denmark)

    Axinte, Dragos Aurelian; Belluco, Walter

    1999-01-01

    Scope of the present measurement campaign is the evaluation of the cutting fluid performance. The report presents the standard routine and the results obtained when turning stainless steel and brass with a commercial vegetable based oil called RV. The methods were developed to be applicable...

  3. Turn me on 100 easy ways to use solar energy

    CERN Document Server

    Kodis, Michelle

    2009-01-01

    HERE COMES THE SUN! With page after page of creative and innovative ideas for using this limitless form of energy, as well as thoughtfully compiled lists of useful resources, Turn Me On is an introductory guide to understanding the exciting advances in a progressing technology that harnesses the boundless power of the sun to bring us clean, renewable energy.

  4. A Rhetoric of Turns: Signs and Symbols in Education

    Science.gov (United States)

    Rutten, Kris; Soetaert, Ronald

    2014-01-01

    In our research and teaching we explore the value and the place of rhetoric in education. From a theoretical perspective we situate our work in different disciplines, inspired by major "turns": linguistic, cultural, anthropological/ethnographic, interpretive, semiotic, narrative, literary, rhetorical etc. In this article we engage in the…

  5. Turning of materials with high-speed abrasive waterjet

    Czech Academy of Sciences Publication Activity Database

    Sitek, Libor; Hlaváček, Petr

    -, October 2016 (2016), s. 1160-1165 ISSN 1805-0476 R&D Projects: GA MŠk ED2.1.00/03.0082; GA MŠk(CZ) LO1406 Institutional support: RVO:68145535 Keywords : abrasive water jet machining * turning * steel * rock * wood Subject RIV: JQ - Machines ; Tools http://www.mmscience.eu/content/file/archives/MM_Science_201692.pdf

  6. Using Facebook Data to Turn Introductory Statistics Students into Consultants

    Science.gov (United States)

    Childers, Adam F.

    2017-01-01

    Facebook provides businesses and organizations with copious data that describe how users are interacting with their page. This data affords an excellent opportunity to turn introductory statistics students into consultants to analyze the Facebook data using descriptive and inferential statistics. This paper details a semester-long project that…

  7. Characterization of jellyfish turning using 3D-PTV

    Science.gov (United States)

    Xu, Nicole; Dabiri, John

    2017-11-01

    Aurelia aurita are oblate, radially symmetric jellyfish that consist of a gelatinous bell and subumbrellar muscle ring, which contracts to provide motive force. Swimming is typically modeled as a purely vertical motion; however, asymmetric activations of swim pacemakers (sensory organs that innervate the muscle at eight locations around the bell margin) result in turning and more complicated swim behaviors. More recent studies have examined flow fields around turning jellyfish, but the input/output relationship between locomotive controls and swim trajectories is unclear. To address this, bell kinematics for both straight swimming and turning are obtained using 3D particle tracking velocimetry (3D-PTV) by injecting biocompatible elastomer tags into the bell, illuminating the tank with ultraviolet light, and tracking the resulting fluorescent particles in a multi-camera setup. By understanding these kinematics in both natural and externally controlled free-swimming animals, we can connect neuromuscular control mechanisms to existing flow measurements of jellyfish turning for applications in designing more energy efficient biohybrid robots and underwater vehicles. NSF GRFP.

  8. Supply and demand of timber for wood turning in Maine

    Science.gov (United States)

    Eric H. Wharton; Robert L., Jr. Nevel; Douglas S. Powell; Douglas S. Powell

    1987-01-01

    An analytical report on the volume of wood used by the wood-turning industry in Maine, and the volume of timber from the state's timberlands that may be suitable for turnstock. Findings are based on the third forest resource survey of Maine timberlands, and an industry canvass of primary manufacturing mills using wood from Maine timberlands, both conducted in 1982...

  9. Online Memorials 2.0: When Mourning Turns Social

    DEFF Research Database (Denmark)

    Gotved, Stine

    This paper investigates the turn from individual to social online mourning rituals and introduces a research project that follows a new memorial platform where the best from both sides are sought combined. The Danish online memorial site from 2000, mindet.dk, is about to launch in a version 2...

  10. Diamond turning and polishing tests on new RSP aluminium alloys

    NARCIS (Netherlands)

    Horst, R. ter; Haan, M. de; Gubbels, G.P.H.; Senden, R.; Venrooy, B.W.H. van; Hoogstrate, A.M.

    2012-01-01

    For years now conventional aluminium 6061 T6 has widely been used for mirrors in astronomical instruments, being diamond turned or since a few years also being optically polished. This allows the development of optical systems that can be tested and operated at any temperature, without being

  11. Student Wellbeing and the Therapeutic Turn in Education

    Science.gov (United States)

    Wright, Katie

    2014-01-01

    This article considers current concerns with promoting student mental health and wellbeing against the backdrop of critiques of the "therapeutic turn" in education. It begins by situating accounts of "therapeutic education" within broader theorisation of therapeutic culture. In doing so, the importance of this work is…

  12. Universals and cultural variation in turn-taking in conversation

    NARCIS (Netherlands)

    Stivers, Tanya; Enfield, N. J.; Brown, Penelope; Englert, Christina; Hayashi, Makoto; Heinemann, Trine; Hoymann, Gertie; Rossano, Federico; de Ruiter, Jan Peter; Yoon, Kyung-Eun; Levinson, Stephen C.

    2009-01-01

    Informal verbal interaction is the core matrix for human social life. A mechanism for coordinating this basic mode of interaction is a system of turn-taking that regulates who is to speak and when. Yet relatively little is known about how this system varies across cultures. The anthropological

  13. CNC Turning Technician. A Competency-Based Instructional System.

    Science.gov (United States)

    Sloan, Kelly; Hilley, Robert

    This competency-based curriculum guide for instructing students in using computer numerically controlled (CNC) turning machines is one of a series of instructional guides for the machinist field developed in Oklahoma. Although developed jointly with Baxter Technologies Corporation and oriented toward the Baxter Vo-Tec 2000 Future Builder CNC…

  14. Turning shopping habits of young consumers into green

    NARCIS (Netherlands)

    Bialkova, Svetlana; van 't Erve, Sanne; van Hoof, Joris Jasper; Pruyn, Adriaan T.H.; Bigné, Enrique

    2014-01-01

    Consumers have strong shopping habits, and although being aware of sustainable issues, they hardly do green shopping. Therefore, a challenging question is: how to break the old shopping habits and turn those into green? The current study addresses this question looking at barriers and potential

  15. Postcolonial turn : re-imagining anthropology and Africa

    NARCIS (Netherlands)

    Devisch, R.; Nyamnjoh, F.

    2011-01-01

    This book is a reflection on the mental decolonization of the postcolonialist turn in Africanist scholarship and is simultaneously a tribute to the late Professor Archibald Mafeje. A number of the articles, including the Introduction by A. Olukoshi and F. Nyamnjoh, are reprinted from the Codesria

  16. Diplomas Count 2013: Second Chances--Turning Dropouts into Graduates

    Science.gov (United States)

    Education Week, 2013

    2013-01-01

    The 2013 edition of "Diplomas Count," entitled "Second Chances: Turning Dropouts into Graduates," examines dropout recovery and innovative strategies for returning to the educational fold the 1 million students who leave school without a diploma each year. "Education Week's" journalists investigate interventions that…

  17. Beyond 100 Tesla: Scientific experiments using single-turn coils

    Science.gov (United States)

    Portugall, Oliver; Solane, Pierre Yves; Plochocka, Paulina; Maude, Duncan K.; Nicholas, Robin J.

    2013-01-01

    Current opportunities and recent examples for research in magnetic fields well above 100 T using single-turn coils are discussed. After a general introduction into basic principles and technical constraints associated with the generation of Megagauss fields we discuss data obtained at the LNCMI Toulouse, where such fields are routinely used for scientific applications.

  18. The turning of the wind in the atmospheric boundary layer

    DEFF Research Database (Denmark)

    Pena Diaz, Alfredo; Gryning, Sven-Erik; Floors, Rogier Ralph

    2014-01-01

    Here we use accurate observations of the wind speed vector to analyze the behavior with height of the wind direction. The observations are a combination of tall meteorological mast and long-range wind lidar measurements covering the entire atmospheric boundary layer. The observations were performed...... winds underpredict the turning of the wind and the boundary-layer winds in general....

  19. Turning value chains into social gains in Southeast Asia | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Turning value chains into social gains in Southeast Asia. Global value chains, which now form the largest share of the world's trade, involve producers and enterprises that produce goods as inputs for other producers. In Southeast Asian countries, these industries employ large numbers of low-skilled workers, particularly ...

  20. Investing in Training and Development. Turning Interest into Capital.

    Science.gov (United States)

    Pont, Tony

    This book, which is intended for individuals responsible for human resource development (HRD) programs, examines a number of issues in turning investments in training and development into human capital and examines ways of making the workplace an arena for development. The following topics are discussed: the nature and role of training and…