WorldWideScience

Sample records for rapidly growing industry

  1. Management of Infections with Rapidly Growing

    Directory of Open Access Journals (Sweden)

    Jong Hwan Kim

    2012-01-01

    Full Text Available Background Infection caused by rapidly growing mycobacteria (RGM is not uncommon, andthe prevalence of RGM infection has been increasing. Clinical diagnosis is difficult becausethere are no characteristic clinical features. There is also no standard antibiotic regimenfor treating RGM infection. A small series of patients with RGM infections was studied toexamine their treatments and outcomes.Methods A total of 5 patients who had developed postoperative infections from January2009 to December 2010 were retrospectively reviewed. Patients were initially screened using amycobacteria rapid screening test (polymerase chain reaction [PCR]-reverse blot hybridizationassay. To confirm mycobacterial infection, specimens were cultured for nontuberculousmycobacteria and analyzed by 16 S ribosomal RNA and rpoB gene PCR.Results The patients were treated with intravenous antibiotics during hospitalization,and oral antibiotics were administered after discharge. The mean duration of follow-upwas 9 months, and all patients were completely cured of infection with a regimen of acombination of antibiotics plus surgical treatment. Although none of the patients developedrecurrence, there were complications at the site of infection, including hypertrophic scarring,pigmentation, and disfigurement.Conclusions Combination antibiotic therapy plus drainage of surgical abscesses appeared tobe effective for the RGM infections seen in our patients. Although neither the exact dosagenor a standardized regimen has been firmly established, we propose that our treatment canprovide an option for the management of rapidly growing mycobacterial infection.

  2. Pharmaceutical Industry in Vietnam: Sluggish Sector in a Growing Market

    Directory of Open Access Journals (Sweden)

    Antonio Angelino

    2017-08-01

    Full Text Available Vietnam is a fast growing economy in the Asian region with a significantly high population (over 92 million in 2015. Although still expanding (about 1.1% on average during 2000–2015, the Vietnamese population is considered to be entering the ageing stage at a very high rate. The rapid expansion of the middle-income urban class and the ageing people ratio have dramatically pushed up the demand for healthcare goods, particularly in terms of pharmaceutical products. Since the early 1990s the government has addressed the necessities of rising demand for healthcare products by formulating a series of policies aimed at promoting the development of the pharmaceutical industry. However, the implementation of such policies does not seem to have been completely efficient given that the country still needs to import up to 90% of its pharmaceutical consumption. This paper aims to explore the development of the pharmaceutical industry during the years 1990–2015 and to identify a series of weaknesses in the government promotion of the industry. Future developments will also be discussed on how the Vietnamese pharmaceutical industry could increase its participation in the regional supply chain, which is currently being dominated by big players like India and China.

  3. Pharmaceutical Industry in Vietnam: Sluggish Sector in a Growing Market.

    Science.gov (United States)

    Angelino, Antonio; Khanh, Do Ta; An Ha, Nguyen; Pham, Tuan

    2017-08-29

    Vietnam is a fast growing economy in the Asian region with a significantly high population (over 92 million in 2015). Although still expanding (about 1.1% on average during 2000-2015), the Vietnamese population is considered to be entering the ageing stage at a very high rate. The rapid expansion of the middle-income urban class and the ageing people ratio have dramatically pushed up the demand for healthcare goods, particularly in terms of pharmaceutical products. Since the early 1990s the government has addressed the necessities of rising demand for healthcare products by formulating a series of policies aimed at promoting the development of the pharmaceutical industry. However, the implementation of such policies does not seem to have been completely efficient given that the country still needs to import up to 90% of its pharmaceutical consumption. This paper aims to explore the development of the pharmaceutical industry during the years 1990-2015 and to identify a series of weaknesses in the government promotion of the industry. Future developments will also be discussed on how the Vietnamese pharmaceutical industry could increase its participation in the regional supply chain, which is currently being dominated by big players like India and China.

  4. Neonatal airway obstruction caused by rapidly growing nasopharyngeal teratoma.

    NARCIS (Netherlands)

    Maartens, I.A.; Wassenberg, T.; Halbertsma, F.J.; Marres, H.A.M.; Andriessen, P.

    2009-01-01

    A case report is presented of a rapidly growing congenital nasopharyngeal teratoma (epignathus) in a preterm infant, leading to severe upper airway obstruction. Prenatal diagnosis by ultrasonography did not reveal the condition because the tumour masses were initially small and there was no

  5. Fruit-Growing in Latvia – Industry and Science

    Directory of Open Access Journals (Sweden)

    Kaufmane Edīte

    2017-06-01

    Full Text Available In all times, fruit trees for family use have been grown at Latvian farms. Yet these fruits obtained market value only after the land ownership reform in 19th century. This facilitated rapid area increase of different fruit crops, allowing supply with fruits not only the local market, but also for export to the largest cities of Russia. Especially fast development of fruit-growing was observed during the first independent republic (1919–1940. The demand for planting material increased, and plants were imported from Western Europe. Choice of unsuitable cultivars and rootstocks was the main reason of the massive orchard area loss during the following severe winters. After the Second World War, the Soviet powers supported only the establishment of large orchards for processing needs, 200-300 ha, which were unsuitable for the Latvian climate and terrain. At the same time, numbers of allotment gardens rapidly increased and part of their produce was sold also on the market. After regaining of independence and private property, interest in fresh fruit and berry production for market, as well as processing, renewed. It was hindered by lack of continuity in experience and knowledge. Diversity of terrain, soils and climate all demand considerate choice of suitable orchard location and cultivars. Direct use of foreign experience often led to failure. At present, development of the fruit industry is most of all hindered by lack of qualified specialists of different levels, which does not allow to establish an appropriate consulting system. Cooperation of growers for easier marketing also is developing too slowly. Insufficient economic and market research does not allow to balance the demand with increase of plantation area, especially for large-scale processing and export, so strategic guidance of the fruit industry is not possible. Development of fruit-growing is hindered also by a lack of continuous long-term support to horticultural science. As a

  6. Environmental and Social Programmes and Rapidly Growing Retailers

    Directory of Open Access Journals (Sweden)

    Peter JONES

    2014-06-01

    Full Text Available This paper looks to provide an exploratory review of the extent to which the world’s fastest growing retailers are publicly reporting on their environmental and social commitments and programmes. The paper begins with an outline discussion of corporate environmental and social programmes and on public reporting processes. The paper draws its empirical material from the most recent information on environmental and social commitments and programmes posted on the world’s top twenty fastest growing retailers’ corporate web sites. While the majority of the world’s top twenty fastest growing retailers provide some public information on their commitment to environmental and social programmes there is marked variation in the extent, the nature and the detail of that information. The findings suggest that the integration of environmental and social programmes is not one of the hallmarks of rapidly growing retailers and in part this reflects the fact that many of the selected retailers are trading within emergent markets where price and availability are the principal factors driving consumer buying behaviour.

  7. Biomass accumulation in rapidly growing loblolly pine and sweetgum

    Energy Technology Data Exchange (ETDEWEB)

    Williams, Thomas M.; Gresham, Charles A. [Baruch Institute of Coastal Ecology and Forest Science, Clemson University, P.O. Box 596, Georgetown, SC 29442 (United States)

    2006-04-15

    Loblolly pine (Pinus taeda) and sweetgum (Liquidambar styraciflua) trees, growing in International Paper Company's study of intensive management on marginal agricultural land near Bainbridge GA, were destructively sampled at the end of the sixth growing season. All trees were single family blocks of genetically superior trees planted 2.5m apart on sub-soiled rows 3.6m apart and grown with complete competition control. Management treatments were: control, irrigation, irrigation plus fertilization, and irrigation plus fertilization plus pest control. Tree measures were basal diameter, DBH, height of live crown, diameter at base of live crown, and total height. Twenty trees of each species were destructively sampled. Stems were sectioned at 1m intervals, stem diameter determined at each end and sections were weighed green. Branches were removed and height, basal diameter, and length were measured on each branch. Branches were separated into foliated and unfoliated segments and weighed green. A stem disk and branch from each meter were returned to the lab to determine dry weight: green weight ratio. Foliated limb: foliage ratios were also determined from sub-sampled branches. Intensive culture resulted in larger growth differences for sweetgum (most intensive treatment 9.5m tall, 13.1cm DBH; control trees 5.0m tall, 6.3cm DBH) than in pine (most intensive treatment 10.3m tall, 17.7cm DBH; control, 7.6m tall, 13.4cm DBH). The pipe model of tree development explained dimensions of the upper 5m of crown with leaf biomass highly correlated to branch basal area (r{sup 2} from 0.697 to 0.947). There was a constant ratio of leaf biomass to branch basal area (50gm/cm{sup 2} for pine, 30gm/cm{sup 2} for sweetgum). We also found a constant ratio of bole basal area to cumulative branch basal area throughout the crowns. Rapidly growing pines produced about 49Mgha{sup -1} of stem biomass, 11Mgha{sup -1} of dead branch biomass, and 17Mgha{sup -1} of unfoliated branch biomass at

  8. Rapidly Growing Esophageal Carcinosarcoma Reduced by Neoadjuvant Radiotherapy Alone

    Directory of Open Access Journals (Sweden)

    Naotaka Ogasawara

    2014-06-01

    Full Text Available Esophageal carcinosarcoma is a rare malignant neoplasm consisting of both carcinomatous and sarcomatous components. It is generally treated by surgery, radiotherapy and chemotherapy according to the protocols used for other esophageal cancers. However, the treatment of esophageal carcinosarcoma by radiotherapy alone before surgery has not been previously described. We report a patient with a rapidly growing esophageal carcinosarcoma that was efficiently reduced by neoadjuvant radiotherapy alone. A previously healthy 69-year-old man was admitted with dysphagia. Initial esophagogastroduodenoscopy (EGD revealed a small nodular polypoid lesion of about 10 mm in the middle esophagus. A second EGD 1 month later showed that the tumor had expanded into a huge mass. A biopsy specimen revealed that the tumor comprised squamous cell carcinoma with spindle cell components, and the tumor was diagnosed as carcinosarcoma which was diagnosed as stage I (T1bN0M0. Due to renal dysfunction, the patient was treated with neoadjuvant radiotherapy (40 Gy without chemotherapy. A third EGD 1 month later revealed remarkable tumor reduction. He then underwent total esophagectomy with regional lymph node dissection (pStage 0, pT1aN0M0. After surgical operation, the patient was followed up without adjuvant therapy. Whole body computed tomography revealed lung metastasis 14 months after surgery, and the patient died 2 months later. The neoadjuvant radiotherapy for esophageal carcinosarcoma was considered to have contributed to the subsequent surgery and his prolonged survival time. Thus, radiotherapy alone might be a suitable neoadjuvant therapy for esophageal carcinosarcomas.

  9. Intraoral tumor with rapid growing. Report of a case.

    Science.gov (United States)

    González-Martín-Moro, Javier; Cebrián-Carretero, Jose Luis; Gómez-García, Elena; del Castillo-Pardo de Vera, Jose Luis; del Val, Daniel

    2005-01-01

    The appearance of an intraoral mass is common in our specialty. Most are benign lesions, but some are primary malignancies. Metastases account for less than 1% of all oral malignancies. An 86 year old woman was referred to our department with a large, asymptomatic, intraoral, fast-growing mass. She had no previous cancer history or other relevant physical findings. The radiology studies showed underlying bone erosion. The histological study showed a metastatic adenocarcinoma with a suspected origin in the abdomen. We were unable to identify it by non invasive diagnostic procedures. Given the patient's general status and despite the ominous prognosis of such lesions, we decided not to perform any aggressive therapy beyond removing the oral mass, in order to maintain her quality of life. There have been no local recurrences until this time.

  10. Wood biomass potentials in Brandenburg - growing competition between industry timber and energy wood

    Energy Technology Data Exchange (ETDEWEB)

    Sasse, D. (CEBra - Centre for Energy Technology Brandenburg GmbH, Cottbus (Germany)); Laufer, S. (University of Applied Sciences Eberswalde (Germany))

    2007-07-01

    The paper presents a survey of dramatic timber market developments in recent years. It shows the significant increase of wood processing capacities in Brandenburg and neighbouring regions and the expansion of the wood energy branch at the same time which fostered a growing competition between the industrial and energetic use of wood. The comparison between the annual timber consumption and the annual timber yield potential in Brandenburg forests reflects a widening gap which cannot be covered by conventional means of forestry management. This gap amounted to 1 million m3 in 2006 and will probably double in 2007. Rapidly growing is the importance of wood from short rotation coppices on agricultural set-aside fields and former open cast mining areas. The development of alternative land use systems for the sustainable production of energy wood is a main focus of several R and D projects in Brandenburg. (orig.)

  11. Frequency of rapid growing mycobacteria among tuberculosis suspected patients in Basra-Iraq

    National Research Council Canada - National Science Library

    Sulami, Amin A. Al; Taee, Asaad Al; Hasan, Zainab A

    2016-01-01

    Objective: The purpose of this study was to estimate the frequency of rapid growing mycobacteria among tuberculosis suspected patients in Basra governorate and study their resistance to drugs. Methods...

  12. Evaluation of Various Culture Media for Detection of Rapidly Growing Mycobacteria from Patients with Cystic Fibrosis.

    Science.gov (United States)

    Preece, Clair L; Wichelhaus, Thomas A; Perry, Audrey; Jones, Amanda L; Cummings, Stephen P; Perry, John D; Hogardt, Michael

    2016-07-01

    Isolation of nontuberculous mycobacteria (NTM) from the sputum of patients with cystic fibrosis (CF) is challenging due to overgrowth by rapidly growing species that colonize the lungs of patients with CF. Extended incubation on Burkholderia cepacia selective agar (BCSA) has been recommended as an expedient culture method for the isolation of rapidly growing NTM in this setting. The aim of this study was to assess five selective media designed for the isolation of Burkholderia cepacia complex, along with two media designed for the isolation of mycobacteria (rapidly growing mycobacteria [RGM] medium and Middlebrook 7H11 agar), for their abilities to isolate NTM. All seven media were challenged with 147 isolates of rapidly growing mycobacteria and 185 isolates belonging to other species. RGM medium was then compared with the most selective brand of BCSA for the isolation of NTM from 224 sputum samples from patients with CF. Different agars designed for the isolation of B. cepacia complex varied considerably in their inhibition of other bacteria and fungi. RGM medium supported the growth of all isolates of mycobacteria and was more selective than any other medium. NTM were recovered from 17 of 224 sputum samples using RGM medium, compared with only 7 samples using the most selective brand of BCSA (P = 0.023). RGM medium offers a superior option, compared to other selective agars, for the isolation of rapidly growing mycobacteria from the sputum of patients with CF. Furthermore, the convenience of using RGM medium enables routine screening for rapidly growing NTM in all submitted sputum samples from patients with CF. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

  13. measles immunisation growing peri-urban area of a mass a rapidly ...

    African Journals Online (AJOL)

    A mass measles immunisation campaign, with a target coverage rate of 85 - 90%, was launched in Khayelitsha, a rapidly growing urban township in the Cape Town area. Cross-sectional surveys of the measles immunisation status of resident 6 - 23-month-old infants were conducted immediately before, immediately after, ...

  14. The impact of entrepreneurial capital and rapidly growing firms: the Canadian example

    DEFF Research Database (Denmark)

    Keen, Christian; Etemad, Hamid

    2011-01-01

    World-class competitiveness is no longer an option for firms seeking growth and survival in the increasingly competitive, dynamic and interconnected world. This paper expands on the concept of entrepreneurial capital and formalizes it as a catalyst that augments other productive factors. It provi...... hostile environments that also suffer from poor resources, this research offers significant lessons with implications for emerging firms, industries and associated regions that aspire to grow faster...

  15. A MODEL OF SUPPLY RESPONSE IN THE AUSTRALIAN ORANGE GROWING INDUSTRY

    OpenAIRE

    Alston, Julian M.; Freebairn, John W.; Quilkey, John J.

    1980-01-01

    A model of the Australian orange growing industry to explain changes in plantings, removals, the number and age composition of trees and orange production is developed and estimated. Most of the variation in plantings is explained by the expected profitability of growing oranges, the current stocks of bearing and nonbearing trees, and removals of trees last year. Estimates of the elasticities of response of plantings and production to price changes are low and there are long time lags. An ill...

  16. A University-Industry Collaborative Response to the Growing Global Demand for Student Talent: Using Interpretive Phenomenology to Discover Life-World Knowledge

    Science.gov (United States)

    Vauterin, Johanna Julia; Linnanen, Lassi; Michelsen, Karl-Erik

    2013-01-01

    The supply of student talent is now taking on an increasingly global dimension and this has extended the breadth of university-industry interaction. Set in the context of a rapidly growing international student market, knowledge transfer between academia and business through global student talent supply is an emerging practice. This paper…

  17. Solar Photovoltaic Economic Development: Building and Growing a Local PV Industry, August 2011 (Book)

    Energy Technology Data Exchange (ETDEWEB)

    2011-08-01

    The U.S. photovoltaic (PV) industry is forecast to grow, and it represents an opportunity for economic development and job creation in communities throughout the United States. This report helps U.S. cities evaluate economic opportunities in the PV industry. It serves as a guide for local economic development offices in evaluating their community?s competitiveness in the solar PV industry, assessing the viability of solar PV development goals, and developing strategies for recruiting and retaining PV companies to their areas.

  18. Mycobacterium aquiterrae sp. nov., a rapidly growing bacterium isolated from groundwater.

    Science.gov (United States)

    Lee, Jae-Chan; Whang, Kyung-Sook

    2017-10-01

    A strain representing a rapidly growing, Gram-stain-positive, aerobic, rod-shaped, non-motile, non-sporulating and non-pigmented species of the genus Mycobacterium, designated strain S-I-6T, was isolated from groundwater at Daejeon in Korea. The strain grew at temperatures between 10 and 37 °C (optimal growth at 25 °C), between pH 4.0 and 9.0 (optimal growth at pH 7.0) and at salinities of 0-5 % (w/v) NaCl, growing optimally with 2 % (w/v) NaCl. Phylogenetic analyses based on multilocus sequence analysis of the 16S rRNAgene, hsp65, rpoB and the 16S-23S internal transcribed spacer indicated that strain S-I-6T belonged to the rapidly growing mycobacteria, being most closely related to Mycobacterium sphagni. On the basis of polyphasic taxonomic analysis, the bacterial strain was distinguished from its phylogenetic neighbours by chemotaxonomic properties and other biochemical characteristics. DNA-DNA relatedness among strain S-I-6T and the closest phylogenetic neighbour strongly support the proposal that this strain represents a novel species within the genus Mycobacterium, for which the name Mycobacterium aquiterrae sp. nov. is proposed. The type strain is S-I-6T (=KACC 17600T=NBRC 109805T=NCAIM B 02535T).

  19. Antimicrobial susceptibility testing of rapidly growing mycobacteria by microdilution - Experience of a tertiary care centre

    Directory of Open Access Journals (Sweden)

    Set R

    2010-01-01

    Full Text Available Purpose: The objective of the study was to perform antimicrobial susceptibility testing of rapidly growing mycobacteria (RGM isolated from various clinically suspected cases of extrapulmonary tuberculosis, from January 2007 to April 2008, at a tertiary care centre in Mumbai. Materials and Methods: The specimens were processed for microscopy and culture using the standard procedures. Minimum inhibitory concentrations (MIC were determined by broth microdilution, using Sensititre CA MHBT. Susceptibility testing was also carried out on Mueller Hinton agar by the Kirby Bauer disc diffusion method. Results: Of the 1062 specimens received for mycobacterial cultures, 104 (9.79% grew mycobacteria. Of the mycobacterial isolates, six (5.76% were rapid growers. M. abscessus and M. chelonae appeared to be resistant organisms, with M. chelonae showing intermediate resistance to amikacin and minocycline. However, all the six isolates showed sensitivity to vancomycin and gentamicin by the disc diffusion test. Also all three isolates of M. abscessus were sensitive to piperacillin and erythromycin. Further studies are required to test their sensitivity to these four antimicrobials by using the microbroth dilution test, before they can be prescribed to patients. Conclusions: We wish to emphasize that reporting of rapidly growing mycobacteria from clinical settings, along with their sensitivity patterns, is an absolute need of the hour.

  20. Clinical management of rapidly growing mycobacterial cutaneous infections in patients after mesotherapy.

    Science.gov (United States)

    Regnier, Stéphanie; Cambau, Emmanuelle; Meningaud, Jean-Paul; Guihot, Amelie; Deforges, Lionel; Carbonne, Anne; Bricaire, François; Caumes, Eric

    2009-11-01

    Increasing numbers of patients are expressing an interest in mesotherapy as a method of reducing body fat. Cutaneous infections due to rapidly growing mycobacteria are a common complication of such procedures. We followed up patients who had developed cutaneous infections after undergoing mesotherapy during the period October 2006-January 2007. Sixteen patients were infected after mesotherapy injections performed by the same physician. All patients presented with painful, erythematous, draining subcutaneous nodules at the injection sites. All patients were treated with surgical drainage. Microbiological examination was performed on specimens that were obtained before and during the surgical procedure. Direct examination of skin smears demonstrated acid-fast bacilli in 25% of the specimens that were obtained before the procedure and 37% of the specimens obtained during the procedure; culture results were positive in 75% of the patients. Mycobacterium chelonae was identified in 11 patients, and Mycobacterium frederiksbergense was identified in 2 patients. Fourteen patients were treated with antibiotics, 6 received triple therapy as first-line treatment (tigecycline, tobramycin, and clarithromycin), and 8 received dual therapy (clarithromycin and ciprofloxacin). The mean duration of treatment was 14 weeks (range, 1-24 weeks). All of the patients except 1 were fully recovered 2 years after the onset of infection, with the mean time to healing estimated at 6.2 months (range, 1-15 months). This series of rapidly growing mycobacterial cutaneous infections highlights the difficulties in treating such infections and suggests that in vitro susceptibility to antibiotics does not accurately predict their clinical efficacy.

  1. Rapid urbanization and the growing threat of violence and conflict: a 21st century crisis.

    Science.gov (United States)

    Patel, Ronak B; Burkle, Frederick M

    2012-04-01

    As the global population is concentrated into complex environments, rapid urbanization increases the threat of conflict and insecurity. Many fast-growing cities create conditions of significant disparities in standards of living, which set up a natural environment for conflict over resources. As urban slums become a haven for criminal elements, youth gangs, and the arms trade, they also create insecurity for much of the population. Specific populations, such as women, migrants, and refugees, bear the brunt of this lack of security, with significant impacts on their livelihoods, health, and access to basic services. This lack of security and violence also has great costs to the general population, both economic and social. Cities have increasingly become the battlefield of recent conflicts as they serve as the seats of power and gateways to resources. International agencies, non-governmental organizations, and policy-makers must act to stem this tide of growing urban insecurity. Protecting urban populations and preventing future conflict will require better urban planning, investment in livelihood programs for youth, cooperation with local communities, enhanced policing, and strengthening the capacity of judicial systems.

  2. Cancer survivors in Switzerland: a rapidly growing population to care for

    Science.gov (United States)

    2013-01-01

    Background Cancer survivors are a heterogeneous group with complex health problems. Data concerning its total number and growing dynamics for Switzerland are scarce and outdated. Methods Population and mortality data were retrieved from the Swiss Federal Statistical Office (FSO). Incidence and relative survival for invasive cancers were computed using data from the cancer registries Geneva (1970–2009), St. Gallen - Appenzell (1980–2010), Grisons & Glarus (1989–2010), and Valais (1989–2010). We estimated prevalence for 1990–2010 using the Prevalence, Incidence Approach MODel (PIAMOD) method. We calculated trends in prevalence estimates by Joinpoint analysis. Projections were extrapolated using the above models and based on time trends of the period 2007–2010. Results The estimated number of cancer survivors increased from 139′717 in 1990 (2.08% of the population) to 289′797 persons in 2010 (3.70%). The growth rate shows an exponential shape and was 3.3% per year in the period 2008 to 2010. Almost half of the survivors have a history of breast, prostate or colorectal cancer. Among cancer survivors, 55% are women but the increases have been more marked in men (p Switzerland. Conclusions There is a rapidly growing population of cancer survivors in Switzerland whose needs and concerns are largely unknown. PMID:23764068

  3. Aquaculture: a rapidly growing and significant source of sustainable food? Status, transitions and potential.

    Science.gov (United States)

    Little, D C; Newton, R W; Beveridge, M C M

    2016-08-01

    The status and potential of aquaculture is considered as part of a broader food landscape of wild aquatic and terrestrial food sources. The rationale and resource base required for the development of aquaculture are considered in the context of broader societal development, cultural preferences and human needs. Attention is drawn to the uneven development and current importance of aquaculture globally as well as its considerable heterogeneity of form and function compared with established terrestrial livestock production. The recent drivers of growth in demand and production are examined and the persistent linkages between exploitation of wild stocks, full life cycle culture and the various intermediate forms explored. An emergent trend for sourcing aquaculture feeds from alternatives to marine ingredients is described and the implications for the sector with rapidly growing feed needs discussed. The rise of non-conventional and innovative feed ingredients, often shared with terrestrial livestock, are considered, including aquaculture itself becoming a major source of marine ingredients. The implications for the continued expected growth of aquaculture are set in the context of sustainable intensification, with the challenges that conventional intensification and emergent integration within, and between, value chains explored. The review concludes with a consideration of the implications for dependent livelihoods and projections for various futures based on limited resources but growing demand.

  4. Winds of change: growing demands for transparency in the relationship between doctors and the pharmaceutical industry.

    Science.gov (United States)

    Mitchell, Philip B

    2009-09-07

    The relationship between medicine and the pharmaceutical industry in the United States is undergoing rapid and momentous change; US Senator Grassley has alleged inadequate disclosure of earnings from industry and lack of acknowledgement of conflicts of interest by leading academics. This article is based on the premise that it is not the relationship per se that is the problem, but rather how that relationship is enacted. The influential 2008 report of the Association of American Medical Colleges (AAMC) has provided detailed recommendations on appropriate interactions between academic physicians and industry (eg, proscribing receipt of gifts including travel support, and proscribing speaking at industry-sponsored educational programs). Contrary to expectations, there has been widespread acceptance of such guidelines. In Australia, details of all industry-sponsored educational events are now listed on the Medicines Australia website. Australian doctors have no alternative but to drastically improve the transparency of their interactions with industry, both in terms of the remuneration received and disclosure of potential conflicts of interest. Australian universities should seriously consider developing recommendations similar to those of the AAMC.

  5. Rapidly growing tropical trees mobilize remarkable amounts of nitrogen, in ways that differ surprisingly among species.

    Science.gov (United States)

    Russell, Ann E; Raich, James W

    2012-06-26

    Fast-growing forests such as tropical secondary forests can accumulate large amounts of carbon (C), and thereby play an important role in the atmospheric CO(2) balance. Because nitrogen (N) cycling is inextricably linked with C cycling, the question becomes: Where does the N come from to match high rates of C accumulation? In unique experimental 16-y-old plantations established in abandoned pasture in lowland Costa Rica, we used a mass-balance approach to quantify N accumulation in vegetation, identify sources of N, and evaluate differences among tree species in N cycling. The replicated design contained four broad-leaved evergreen tree species growing under similar environmental conditions. Nitrogen uptake was rapid, reaching 409 (± 30) kg · ha(-1) · y(-1), double the rate reported from a Puerto Rican forest and greater than four times that observed at Hubbard Brook Forest (New Hampshire, USA). Nitrogen amassed in vegetation was 874 (± 176) kg · ha(-1), whereas net losses of soil N (0-100 cm) varied from 217 (±146) to 3,354 (± 915) kg · ha(-1) (P = 0.018) over 16 y. Soil C:N, δ(13)C values, and N budgets indicated that soil was the main source of biomass N. In Vochysia guatemalensis, however, N fixation contributed >60 kg · ha(-1) · y(-1). All species apparently promoted soil N turnover, such that the soil N mean residence time was 32-54 y, an order of magnitude lower than the global mean. High rates of N uptake were associated with substantial N losses in three of the species, in which an average of 1.6 g N was lost for every gram of N accumulated in biomass.

  6. ISOLATION AND ANTIBIOTIC SUSCEPTIBILITY TESTING OF RAPIDLY-GROWING MYCOBACTERIA FROM GRASSLAND SOILS

    Directory of Open Access Journals (Sweden)

    Martina Kyselková

    2013-08-01

    Full Text Available Rapidly growing mycobacteria (RGM are common soil saprophytes, but certain strains cause infections in human and animals. The infections due to RGM have been increasing in past decades and are often difficult to treat. The susceptibility to antibiotics is regularly evaluated in clinical isolates of RGM, but the data on soil RGM are missing. The objectives of this study was to isolate RGM from four grassland soils with different impact of manuring, and assess their resistance to antibiotics and the ability to grow at 37°C and 42°C. Since isolation of RGM from soil is a challenge, a conventional decontamination method (NaOH/malachite green/cycloheximide and a recent method based on olive oil/SDS demulsification were compared. The olive oil/SDS method was less efficient, mainly because of the emulsion instability and plate overgrowing with other bacteria. Altogether, 44 isolates were obtained and 23 representatives of different RGM genotypes were screened. The number of isolates per soil decreased with increasing soil pH, consistently with previous findings that mycobacteria were more abundant in low pH soils. Most of the isolates belonged to the Mycobacterium fortuitum group. The majority of isolates was resistant to 2-4 antibiotics. Multiresistant strains occurred also in a control soil that has a long history without the exposure to antibiotic-containing manure. Seven isolates grew at 37°C, including the species M. septicum and M. fortuitum known for infections in humans. This study shows that multiresistant RGM close to known human pathogens occur in grassland soils regardless the soil history of manuring.

  7. The spatial biology of transcription and translation in rapidly growing Escherichia coli

    Directory of Open Access Journals (Sweden)

    Somenath eBakshi

    2015-07-01

    Full Text Available Single-molecule fluorescence provides high resolution spatial distributions of ribosomes and RNA polymerase (RNAP in live, rapidly growing E. coli. Ribosomes are more strongly segregated from the nucleoids (chromosomal DNA than previous widefield fluorescence studies suggested. While most transcription may be co-translational, the evidence indicates that most translation occurs on free mRNA copies that have diffused from the nucleoids to a ribosome-rich region. Analysis of time-resolved images of the nucleoid spatial distribution after treatment with the transcription-halting drug rifampicin and the translation-halting drug chloramphenicol shows that both drugs cause nucleoid contraction on the 0-3 min timescale. This is consistent with the transertion hypothesis. We suggest that the longer-term (20-30 min nucleoid expansion after Rif treatment arises from conversion of 70S-polysomes to 30S and 50S subunits, which readily penetrate the nucleoids. Monte Carlo simulations of a polymer bead model built to mimic the chromosomal DNA and ribosomes (either 70S-polysomes or 30S and 50S subunits explain spatial segregation or mixing of ribosomes and nucleoids in terms of excluded volume and entropic effects alone. A comprehensive model of the transcription-translation-transertion system incorporates this new information about the spatial organization of the E. coli cytoplasm. We propose that transertion, which radially expands the nucleoids, is essential for recycling of 30S and 50S subunits from ribosome-rich regions back into the nucleoids. There they initiate co-transcriptional translation, which is an important mechanism for maintaining RNAP forward progress and protecting the nascent mRNA chain. Segregation of 70S-polysomes from the nucleoid may facilitate rapid growth by shortening the search time for ribosomes to find free mRNA concentrated outside the nucleoid and the search time for RNAP concentrated within the nucleoid to find transcription

  8. An automated system for rapid non-destructive enumeration of growing microbes.

    Directory of Open Access Journals (Sweden)

    Roanna London

    Full Text Available BACKGROUND: The power and simplicity of visual colony counting have made it the mainstay of microbiological analysis for more than 130 years. A disadvantage of the method is the long time required to generate visible colonies from cells in a sample. New rapid testing technologies generally have failed to maintain one or more of the major advantages of culture-based methods. PRINCIPAL FINDINGS: We present a new technology and platform that uses digital imaging of cellular autofluorescence to detect and enumerate growing microcolonies many generations before they become visible to the eye. The data presented demonstrate that the method preserves the viability of the microcolonies it detects, thus enabling generation of pure cultures for microbial identification. While visual colony counting detects Escherichia coli colonies containing about 5x10(6 cells, the new imaging method detects E. coli microcolonies when they contain about 120 cells and microcolonies of the yeast Candida albicans when they contain only about 12 cells. We demonstrate that digital imaging of microcolony autofluorescence detects a broad spectrum of prokaryotic and eukaryotic microbes and present a model for predicting the time to detection for individual strains. Results from the analysis of environmental samples from pharmaceutical manufacturing plants containing a mixture of unidentified microbes demonstrate the method's improved test turnaround times. CONCLUSION: This work demonstrates a new technology and automated platform that substantially shortens test times while maintaining key advantages of the current methods.

  9. Mycobacterium celeriflavum sp. nov., a rapidly growing scotochromogenic bacterium isolated from clinical specimens.

    Science.gov (United States)

    Shahraki, Abdolrazagh Hashemi; Çavuşoğlu, Cengiz; Borroni, Emanuele; Heidarieh, Parvin; Koksalan, Orhan Kaya; Cabibbe, Andrea Maurizio; Hashemzadeh, Mohamad; Mariottini, Alessandro; Mostafavi, Ehsan; Cittaro, Davide; Feizabadi, Mohamad Mehdi; Lazarevic, Dejan; Yaghmaei, Farhad; Molinari, Gian Lorenzo; Camaggi, Anna; Tortoli, Enrico

    2015-02-01

    Six strains of a rapidly growing scotochromogenic mycobacterium were isolated from pulmonary specimens of independent patients. Biochemical and cultural tests were not suitable for their identification. The mycolic acid pattern analysed by HPLC was different from that of any other mycobacterium. Genotypic characterization, targeting seven housekeeping genes, revealed the presence of microheterogeneity in all of them. Different species were more closely related to the test strains in various regions: the type strain of Mycobacterium moriokaense showed 99.0 % 16S rRNA gene sequence similarity, and 91.5-96.5 % similarity for the remaining six regions. The whole genome sequences of the proposed type strain and that of M. moriokaense presented an average nucleotide identity (ANI) of 82.9 %. Phylogenetic analysis produced poorly robust trees in most genes with the exception of rpoB and sodA where Mycobacterium flavescens and Mycobacterium novocastrense were the closest species. This phylogenetic relatedness was confirmed by the tree inferred from five concatenated genes, which was very robust. The polyphasic characterization of the test strains, supported by the ANI value, demonstrates that they belong to a previously unreported species, for which the name Mycobacterium celeriflavum sp. nov. is proposed. The type strain is AFPC-000207(T) ( = DSM 46765(T) = JCM 18439(T)). © 2015 IUMS.

  10. Isolation of Rapidly Growing Nontuberculous Mycobacteria in Wounds Following Combat-Related Injury.

    Science.gov (United States)

    Fiske, Lauren C; Homeyer, Diane C; Zapor, Michael; Hartzell, Joshua; Warkentien, Tyler; Weintrob, Amy C; Ganesan, Anuradha; Burgess, Timothy; Snesrud, Erik; Waterman, Paige; Nielsen, Lindsey; Ressner, Roseanne A

    2016-06-01

    Rapidly growing nontuberculous mycobacteria (RGNTM) have yet to be described in combat-related injuries. This study investigates the epidemiology, clinical findings, treatment, and outcomes of RGNTM infections among combat casualties wounded in Afghanistan from 2010 to 2012. Patients with RGNTM were identified from the Department of Defense Trauma Registry through the Trauma Infectious Disease Outcomes Study. Trauma history, surgical management, and clinical data were collected. Six isolates from patients requiring antimycobacterial therapy were sequenced. Seventeen cases were identified. Six cases, predominantly associated with Mycobacterium abscessus, required aggressive debridement and a median of 180 days of multidrug antimycobacterial therapy that included clofazimine. M. abscessus isolates expressed the erythromycin resistance methylase (erm(41)) gene for inducible macrolide resistance, yet there were no clinical treatment failures when macrolides were utilized in combination therapy. No clonal similarity between M. abscessus isolates was found. Eleven cases had positive wound cultures, but did not require antimycobacterial therapy. The median duration of time of injury to first detection of a RGNTM was 57 days. This represents the first report of RGNTM infections in war-wounded patients. RGNTM should be recognized as potential pathogens in grossly infected combat wounds. Surgical debridement and multidrug antimycobacterial therapy, when clinically indicated, was associated with satisfactory clinical outcomes. Reprint & Copyright © 2016 Association of Military Surgeons of the U.S.

  11. Nosocomial rapidly growing mycobacterial infections following laparoscopic surgery: CT imaging findings

    Energy Technology Data Exchange (ETDEWEB)

    Volpato, Richard [Cassiano Antonio de Moraes University Hospital, Department of Diagnostic Radiology, Vitoria, ES (Brazil); Campi de Castro, Claudio [University of Sao Paulo Medical School, Department of Radiology, Cerqueira Cesar, Sao Paulo (Brazil); Hadad, David Jamil [Cassiano Antonio de Moraes University Hospital, Nucleo de Doencas Infecciosas, Department of Internal Medicine, Vitoria, ES (Brazil); Silva Souza Ribeiro, Flavya da [Laboratorio de Patologia PAT, Department of Diagnostic Radiology, Unit 1473, Vitoria, ES (Brazil); Filho, Ezequiel Leal [UNIMED Diagnostico, Department of Diagnostic Radiology, Unit 1473, Vitoria, ES (Brazil); Marcal, Leonardo P. [The University of Texas M D Anderson Cancer Center, Department of Diagnostic Radiology, Unit 1473, Houston, TX (United States)

    2015-09-15

    To identify the distribution and frequency of computed tomography (CT) findings in patients with nosocomial rapidly growing mycobacterial (RGM) infection after laparoscopic surgery. A descriptive retrospective study in patients with RGM infection after laparoscopic surgery who underwent CT imaging prior to initiation of therapy. The images were analyzed by two radiologists in consensus, who evaluated the skin/subcutaneous tissues, the abdominal wall, and intraperitoneal region separately. The patterns of involvement were tabulated as: densification, collections, nodules (≥1.0 cm), small nodules (<1.0 cm), pseudocavitated nodules, and small pseudocavitated nodules. Twenty-six patients met the established criteria. The subcutaneous findings were: densification (88.5 %), small nodules (61.5 %), small pseudocavitated nodules (23.1 %), nodules (38.5 %), pseudocavitated nodules (15.4 %), and collections (26.9 %). The findings in the abdominal wall were: densification (61.5 %), pseudocavitated nodules (3.8 %), and collections (15.4 %). The intraperitoneal findings were: densification (46.1 %), small nodules (42.3 %), nodules (15.4 %), and collections (11.5 %). Subcutaneous CT findings in descending order of frequency were: densification, small nodules, nodules, small pseudocavitated nodules, pseudocavitated nodules, and collections. The musculo-fascial plane CT findings were: densification, collections, and pseudocavitated nodules. The intraperitoneal CT findings were: densification, small nodules, nodules, and collections. (orig.)

  12. An assessment of the maxilla after rapid maxillary expansion using cone beam computed tomography in growing children.

    Science.gov (United States)

    Woller, Jessica L; Kim, Ki Beom; Behrents, Rolf G; Buschang, Peter H

    2014-01-01

    With the advent of cone beam computed tomography (CBCT), it is now possible to quantitatively evaluate the effects of rapid maxillary expansion (RME) on the entire maxillary complex in growing patients. The purpose of this study is to use three-dimensional images to evaluate the displacement that occurs at the circummaxillary sutures (frontonasal, zygomaticomaxillary, intermaxillary, midpalatal, and transpalatal sutures) following rapid maxillary expansion in growing children. The CBCT scans of 25 consecutively treated RME patients (10 male, 15 female) with mean age of 12.3±2.6 years, were examined before expansion and immediately following the last activation of the expansion appliance. Statistically significant (Pmaxillary first molars due to RME was also statistically significant. There was no statistically significant displacement of the transpalatal suture. Rapid maxillary expansion results in significant displacement of the bones of circummaxillary sutures in growing children.

  13. Qualitative CFD for Rapid Learning in Industrial and Academic Applications

    Science.gov (United States)

    Variano, Evan

    2010-11-01

    We present a set of tools that allow CFD to be used at an early stage in the design process. Users can rapidly explore the qualitative aspects of fluid flow using real-time simulations that react immediately to design changes. This can guide the design process by fostering an intuitive understanding of fluid dynamics at the prototyping stage. We use an extremely stable Navier-Stokes solver that is available commercially (and free to academic users) plus a custom user interface. The code is designed for the animation and gaming industry, and we exploit the powerful graphical display capabilities to develop a unique human-machine interface. This interface allows the user to efficiently explore the flow in 3D + real time, fostering an intuitive understanding of steady and unsteady flow patterns. There are obvious extensions to use in an academic setting. The trade-offs between accuracy and speed will be discussed in the context of CFD's role in design and education.

  14. Two novel species of rapidly growing mycobacteria: Mycobacterium lehmannii sp. nov. and Mycobacterium neumannii sp. nov.

    Science.gov (United States)

    Nouioui, Imen; Sangal, Vartul; Carro, Lorena; Teramoto, Kanae; Jando, Marlen; Montero-Calasanz, Maria Del Carmen; Igual, José Mariano; Sutcliffe, Iain; Goodfellow, Michael; Klenk, Hans-Peter

    2017-12-01

    Two rapidly growing mycobacteria with identical 16S rRNA gene sequences were the subject of a polyphasic taxonomic study. The strains formed a well-supported subclade in the mycobacterial 16S rRNA gene tree and were most closely associated with the type strain of Mycobacterium novocastrense. Single and multilocus sequence analyses based on hsp65, rpoB and 16S rRNA gene sequences showed that strains SN 1900T and SN 1904T are phylogenetically distinct but share several chemotaxonomic and phenotypic features that are are consistent with their classification in the genus Mycobacterium. The two strains were distinguished by their different fatty acid and mycolic acid profiles, and by a combination of phenotypic features. The digital DNA-DNA hybridization (dDDH) and average nucleotide identity (ANI) values for strains SN 1900T and SN 1904T were 61.0 % and 94.7 %, respectively; in turn, the corresponding dDDH and ANI values with M. novocastrense DSM 44203T were 41.4 % and 42.8 % and 89.3 % and 89.5 %, respectively. These results show that strains SN1900T and SN 1904T form new centres of taxonomic variation within the genus Mycobacterium. Consequently, strains SN 1900T (40T=CECT 8763T=DSM 43219T) and SN 1904T (2409T=CECT 8766T=DSM 43532T) are considered to represent novel species, for which the names Mycobacteriumlehmannii sp. nov. and Mycobacteriumneumannii sp. nov. are proposed. A strain designated as 'Mycobacteriumacapulsensis' was shown to be a bona fide member of the putative novel species, M. lehmannii.

  15. An assessment of the maxilla after rapid maxillary expansion using cone beam computed tomography in growing children

    OpenAIRE

    Woller,Jessica L.; Ki Beom Kim; Behrents, Rolf G.; Buschang, Peter H.

    2014-01-01

    INTRODUCTION: With the advent of cone beam computed tomography (CBCT), it is now possible to quantitatively evaluate the effects of rapid maxillary expansion (RME) on the entire maxillary complex in growing patients. OBJECTIVE: The purpose of this study is to use three-dimensional images to evaluate the displacement that occurs at the circummaxillary sutures (frontonasal, zygomaticomaxillary, intermaxillary, midpalatal, and transpalatal sutures) following rapid maxillary expansion in gro...

  16. Rapid determination of fumigant and industrial chemical residues in food.

    Science.gov (United States)

    Daft, J L

    1988-01-01

    A gas chromatographic (GC) method is described for the determination of 22 fumigant and industrial chemical residues in a variety of foods. The fumigants and industrial chemicals determined are methyl bromide, methylene chloride, carbon disulfide, chloroform, 1,1-dichloroethane, ethylene dichloride, methyl chloroform, carbon tetrachloride, methylene bromide, propylene dichloride, 2,3-dichloropropene, trichloroethylene, 1,3-dichloropropylene, 1,1,2-trichloroethane, chloropicrin, ethylene dibromide, tetrachloroethylene, propylene dibromide, 1,1,2,2-tetrachloroethane, p-dichlorobenzene, o-dichlorobenzene, and 1,2-dibromo-3-chloropropane. Except for the latter three, the fumigants are determined at 90 degrees C on 3.6 m 20% loaded OV-101 columns with electron-capture and Hall-electroconductivity detectors. The other 3 compounds (o-dichlorobenzene, p-dichlorobenzene, and 1,2-dibromo-3-chloropropane), which elute beyond 30 min on the above columns, are determined at 90 degrees C on 1.8 m 5% loaded OV-101 columns with the same detectors. The ng/g-level fortifications have an overall mean analyte recovery of 70% and a coefficient of variation of 40%. The variety of foods examined includes both fatty and nonfatty food types (e.g., off-the-shelf cooked and uncooked grain-based items, dairy products, fresh and canned fruits and vegetables, and meats). Samples are extracted and cleaned up according to fat content and food type. Samples containing less than 71% fat are extracted by using an aqueous: nonaqueous shakeout (20% acetone solution under isooctane). Most extracts (isooctanes) are analyzed directly. Extracts from samples containing from 21 to 70% fat (e.g., ground beef, pecans, and corn chips) are cleaned up further on micro-Florisil columns to remove excess fat. A few other samples containing more than 71% fat or oil (e.g., butter, salad dressing, and vegetable oil) are diluted directly in isooctane and, depending on the degree of dilution, can be cleaned up further on

  17. Rapid conversions and avoided deforestation: examining four decades of industrial plantation expansion in Borneo

    Science.gov (United States)

    Gaveau, David L. A.; Sheil, Douglas; Husnayaen; Salim, Mohammad A.; Arjasakusuma, Sanjiwana; Ancrenaz, Marc; Pacheco, Pablo; Meijaard, Erik

    2016-09-01

    New plantations can either cause deforestation by replacing natural forests or avoid this by using previously cleared areas. The extent of these two situations is contested in tropical biodiversity hotspots where objective data are limited. Here, we explore delays between deforestation and the establishment of industrial tree plantations on Borneo using satellite imagery. Between 1973 and 2015 an estimated 18.7 Mha of Borneo’s old-growth forest were cleared (14.4 Mha and 4.2 Mha in Indonesian and Malaysian Borneo). Industrial plantations expanded by 9.1 Mha (7.8 Mha oil-palm; 1.3 Mha pulpwood). Approximately 7.0 Mha of the total plantation area in 2015 (9.2 Mha) were old-growth forest in 1973, of which 4.5-4.8 Mha (24-26% of Borneo-wide deforestation) were planted within five years of forest clearance (3.7-3.9 Mha oil-palm; 0.8-0.9 Mha pulpwood). This rapid within-five-year conversion has been greater in Malaysia than in Indonesia (57-60% versus 15-16%). In Indonesia, a higher proportion of oil-palm plantations was developed on already cleared degraded lands (a legacy of recurrent forest fires). However, rapid conversion of Indonesian forests to industrial plantations has increased steeply since 2005. We conclude that plantation industries have been the principle driver of deforestation in Malaysian Borneo over the last four decades. In contrast, their role in deforestation in Indonesian Borneo was less marked, but has been growing recently. We note caveats in interpreting these results and highlight the need for greater accountability in plantation development.

  18. SUCCESS FACTORS IN GROWING SMBs: A STUDY OF TWO INDUSTRIES AT TWO STAGES OF DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Tor Jarl Trondsen

    2002-01-01

    Full Text Available The study attempts to identify factors for growing SMBs. An evolutionary phase approach has been used. The study also aims to find out if there are common and different denominators for newer and older firms that can affect their profitability. The study selects a sampling frame that isolates two groups of firms in two industries at two stages of development. A variety of organizational and structural data was collected and analyzed. Amongst the conclusions that may be drawn from the study are that it is not easy to find a common definition of success, it is important to stratify SMBs when studying them, an evolutionary stage approach helps to compare firms with roughly the same external and internal dynamics and each industry has its own set of success variables.The study has identified three success variables for older firms that reflect contemporary strategic thinking such as crafting a good strategy and changing it only incrementally, building core competencies and outsourcing the rest, and keeping up with innovation and honing competitive skills.

  19. Strategies of heavy metal uptake by plants growing under industrial emissions.

    Science.gov (United States)

    Mingorance, M D; Valdés, B; Oliva, S Rossini

    2007-05-01

    Total concentrations of Al, Ba, Ca, Cr, Cu, Fe, K, Mg, Mn, Pb and Zn have been estimated in soil (A-horizon) and in leaves and stem samples of two Mediterranean species (Nerium oleander L. and Pinus pinea L.) growing in an industrial area in Spain (Huelva). Both species showed a different behaviour for the elements studied. Bark and leaves of both species acted as excluders of Al, Ba, Cr, Fe and Pb, N. oleander acted as indicator of Cu and Zn and, needles and bark of P. pinea behaved as accumulators of Cu. The enrichment ratio data indicated that Cu in soil and plant was enhanced with anthropogenic activities, with industrial activities being the primary contributor for Cu. All the other elements studied were controlled by natural source variations, but Pb could also be anthropogenically enhanced. Wood did not accumulate pollutants, with the translocation from bark being rather reduced. Uptake patterns of metals into foliage and bark tissues were more or less the same in both species for almost all the studied elements, which indicates that both plant parts could be indifferently used as biomonitors.

  20. Mycobacterium iranicum sp. nov., a rapidly growing scotochromogenic species isolated from clinical specimens on three different continents

    NARCIS (Netherlands)

    Shojaei, H.; Daley, C.; Gitti, Z.; Hashemi, A.; Heidarieh, P.; Moore, E.R.; Naser, A.D.; Russo, C.; Ingen, J. van; Tortoli, E.

    2013-01-01

    The isolation and characterization of a novel, rapidly growing, scotochromogenic mycobacterial species is reported. Eight independent strains were isolated from clinical specimens from six different countries of the world, two in Iran, two in Italy and one in each of following countries: Greece, The

  1. Mandibular response after rapid maxillary expansion in class II growing patients: a pilot randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Roberta Lione

    2017-11-01

    Full Text Available Abstract Background The aim of this pilot randomized controlled trial (RCT was to evaluate the sagittal mandibular response induced by rapid maxillary expansion (RME therapy in mixed dentition patients with class II malocclusion, comparing the effects of bonded RME and banded RME with a matched untreated class II control group. Methods This RCT was designed in parallel with an allocation ratio of 1:1:1. The sample consisted of 30 children with a mean age of 8.1 ± 0.6 years who were randomly assigned to three groups: group 1 treated with bonded RME, group 2 treated with banded RME, and group 3 the untreated control group. All patients met the following inclusion criteria: early mixed dentition, class II molar relationship, transverse discrepancy ≥ 4 mm, overjet ≥ 5 mm, and prepubertal skeletal maturity stage (CS1–CS2. The expansion screw was activated one quarter of a turn per day (0.25 mm until overcorrection was reached. For each subject, lateral cephalograms and plaster casts were obtained before treatment (T1 and after 1 year (T2. A randomization list was created for the group assignment, with an allocation ratio of 1:1:1. The observer who performed all the measurements was blinded to group assignment. The study was single-blinded in regard to statistical analysis. Results RME was effective in the correction of maxillary deficiency. Class II patients treated with both types of RME showed no significant improvement of the anteroposterior relationship of the maxilla and the mandible at both skeletal and occlusal levels. The acrylic splint RME had significant effects on reducing the skeletal vertical dimension and the gonial angle. Conclusions The orthopedic expansion did not affect the sagittal relationship of class II patients treated in the early mixed dentition when compared with the untreated control group. Additional studies with a larger sample are warranted to elucidate individual variations in dento-skeletal mandibular

  2. Mandibular response after rapid maxillary expansion in class II growing patients: a pilot randomized controlled trial.

    Science.gov (United States)

    Lione, Roberta; Brunelli, Valerio; Franchi, Lorenzo; Pavoni, Chiara; Quiroga Souki, Bernardo; Cozza, Paola

    2017-11-06

    The aim of this pilot randomized controlled trial (RCT) was to evaluate the sagittal mandibular response induced by rapid maxillary expansion (RME) therapy in mixed dentition patients with class II malocclusion, comparing the effects of bonded RME and banded RME with a matched untreated class II control group. This RCT was designed in parallel with an allocation ratio of 1:1:1. The sample consisted of 30 children with a mean age of 8.1 ± 0.6 years who were randomly assigned to three groups: group 1 treated with bonded RME, group 2 treated with banded RME, and group 3 the untreated control group. All patients met the following inclusion criteria: early mixed dentition, class II molar relationship, transverse discrepancy ≥ 4 mm, overjet ≥ 5 mm, and prepubertal skeletal maturity stage (CS1-CS2). The expansion screw was activated one quarter of a turn per day (0.25 mm) until overcorrection was reached. For each subject, lateral cephalograms and plaster casts were obtained before treatment (T1) and after 1 year (T2). A randomization list was created for the group assignment, with an allocation ratio of 1:1:1. The observer who performed all the measurements was blinded to group assignment. The study was single-blinded in regard to statistical analysis. RME was effective in the correction of maxillary deficiency. Class II patients treated with both types of RME showed no significant improvement of the anteroposterior relationship of the maxilla and the mandible at both skeletal and occlusal levels. The acrylic splint RME had significant effects on reducing the skeletal vertical dimension and the gonial angle. The orthopedic expansion did not affect the sagittal relationship of class II patients treated in the early mixed dentition when compared with the untreated control group. Additional studies with a larger sample are warranted to elucidate individual variations in dento-skeletal mandibular response to the maxillary expansion protocol in class-II-growing

  3. [The diagnosis and treatment of rapidly growing non-tuberculous mycobacterial keratitis].

    Science.gov (United States)

    Guan, Huai-Jin; Cheng, Zheng-Ping; Yin, Li; Wu, Yu-Yu; Hu, Nan; Zhang, Jun-Fang; Shi, Hai-Hong

    2009-06-01

    To study the clinical features, diagnosis and treatment of non-tuberculous mycobacterial keratitis (NTMK). It was retrospective case series study. Twelve eyes in 12 patients with NTMK following corneal foreign body trauma in 2007 were studied retrospectively including the case histories, clinical findings, laboratory examinations, diagnosis, treatment and prognosis. The main laboratory examination included corneal scrapings by culturing, polymerase chain reaction (PCR) and transmission electron microscopy (TEM), corneal lesions by histopathologic examinations and TEM. The patients received local and systemic antibiotics therapy, lesion cleaning followed by cauterization with tincture of iodine (5%) and (or) keratoplasty. All cases had a history of corneal trauma, there was corneal metallic foreign body removal at one hospital in 11 cases, corneal reed trauma in 1 case. The characteristic signs involved grayish-blue crystalloid keratopathy, multifocal infiltrates, satellites, radical form changes in the Descemet's membrane. The results of laboratory examinations of the scrapings of the cornea infection were as follows: all cultures (12/12) were positive for rapidly growing mycobacteria, and isolates from 5 patients were all diagnosed as mycobacterium chelonae subspecies abscess; acid-fast staining revealed positive bacilli in all the 4 patients; seven of 8 patients were positive for bacterium by PCR. Transmission electron microscopy in all the 3 specimens showed many slender rod-shaped or short coarse-shaped bacteria which were phagocytized by monocytes, and some necrotic tissue. Infections in 10 eyes were resolved by combined treatment regimen including a combination of antimicrobial agents (amikacin, rifampin, gatifloxacin, ciprofloxacin, azithromycin and/or ofloxacin, etc.) and local lesion cleaning followed by cauterization with 5% tincture of iodine within 2-5 months; two cases resolved by keratoplasty which poorly responded to antibiotic therapy for 6 months

  4. Zoonoses: a potential obstacle to the growing wildlife industry of Namibia

    Directory of Open Access Journals (Sweden)

    Kudakwashe Magwedere

    2012-10-01

    Full Text Available Zoonoses, which account for approximately 75% of emerging human infectious diseases worldwide, pose a re-emerging threat to public health. With an ever-increasing interrelationship between humans, livestock and wildlife species, the threat to human health will rise to unprecedented levels. Wildlife species contribute to the majority of emerging diseases; therefore, there is an urgent need to define control systems of zoonoses of wildlife origin but very little information exists. In this review, we examine prevalent zoonotic infections reported in Namibia between 1990 and 2009 and assess their potential impact on the growing wildlife industry. A wide spectrum of zoonotic diseases was confirmed in both livestock and wildlife species, with rabies and anthrax cases being over-represented and also showing the widest species distribution. Whilst vaccination and ante-mortem inspection against these diseases may curb infected livestock species from entering the human food chain, such practices are difficult to implement in free-ranging wildlife species. In this context, there is a need to improve existing control measures and/or develop novel and better interventional strategies to reduce the threat of this re-emerging global problem. This review provides the basis for initiating a multidisciplinary evidence-based approach to control zoonoses in countries with thriving wildlife and game farming.

  5. Enablers towards establishing and growing South Africa's waste to electricity industry.

    Science.gov (United States)

    Amsterdam, Heinrich; Thopil, George Alex

    2017-10-01

    In South Africa the electricity generation mix is relatively un-diverse whereas globally the transformation of the sector is advancing rapidly. Coal remains the predominant fuel source and limited success has to date been achieved in the renewable energy sector. The electricity generation sector is therefore hindered from moving towards an electricity generation landscape where alternative fuel sources is utilised. This research is aimed at gaining insight into the enablers that led towards an increasing trend (observed globally) in exploiting waste as a fuel for electricity generation, and to outline the presence of obstacles that hinder separation of waste for electricity use in the South African context. Furthermore it is an attempt at informing what appropriate interventions (operational and policy) may be considered suitable for South Africa to overcome these barriers in order to enable a sustainable South African waste to electricity (WTE) Industry. Findings show that numerous barriers to a WTE exists in the South African context, however overcoming these barriers is not as simple as adopting the European model with the aim to modify the electricity generation mix and waste management landscape. Selected enablers deemed appropriate in the South African context are adapted from the European model, and are greatly influenced by the prevailing socio-economic status of South Africa. Primary enablers identified were, (i) government support is needed especially in the form of subsidisation for green energy, (ii) increase landfill costs through the implementation of a landfill tax, (iii) streamline the process for Independent Private Power Producers (IPPPs) to connect to the national grid with off-take guaranteed and the inclusion of WTE into an electricity roadmap (effectively government's strategy). The proposed enabling interventions would help in overcoming the barriers for a South African WTE industry. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Multistate US Outbreak of Rapidly Growing Mycobacterial Infections Associated with Medical Tourism to the Dominican Republic, 2013-2014(1).

    Science.gov (United States)

    Schnabel, David; Esposito, Douglas H; Gaines, Joanna; Ridpath, Alison; Barry, M Anita; Feldman, Katherine A; Mullins, Jocelyn; Burns, Rachel; Ahmad, Nina; Nyangoma, Edith N; Nguyen, Duc B; Perz, Joseph F; Moulton-Meissner, Heather A; Jensen, Bette J; Lin, Ying; Posivak-Khouly, Leah; Jani, Nisha; Morgan, Oliver W; Brunette, Gary W; Pritchard, P Scott; Greenbaum, Adena H; Rhee, Susan M; Blythe, David; Sotir, Mark

    2016-08-01

    During 2013, the Maryland Department of Health and Mental Hygiene in Baltimore, MD, USA, received report of 2 Maryland residents whose surgical sites were infected with rapidly growing mycobacteria after cosmetic procedures at a clinic (clinic A) in the Dominican Republic. A multistate investigation was initiated; a probable case was defined as a surgical site infection unresponsive to therapy in a patient who had undergone cosmetic surgery in the Dominican Republic. We identified 21 case-patients in 6 states who had surgery in 1 of 5 Dominican Republic clinics; 13 (62%) had surgery at clinic A. Isolates from 12 (92%) of those patients were culture-positive for Mycobacterium abscessus complex. Of 9 clinic A case-patients with available data, all required therapeutic surgical intervention, 8 (92%) were hospitalized, and 7 (78%) required ≥3 months of antibacterial drug therapy. Healthcare providers should consider infection with rapidly growing mycobacteria in patients who have surgical site infections unresponsive to standard treatment.

  7. Rapidly growing Mycobacterium infections after cosmetic surgery in medical tourists: the Bronx experience and a review of the literature

    OpenAIRE

    Lucas R. Cusumano; Vivy Tran; Aileen Tlamsa; Philip Chung; Robert Grossberg; Gregory Weston; Uzma N. Sarwar

    2017-01-01

    Background: Medical tourism is increasingly popular for elective cosmetic surgical procedures. However, medical tourism has been accompanied by reports of post-surgical infections due to rapidly growing mycobacteria (RGM). The authors’ experience working with patients with RGM infections who have returned to the USA after traveling abroad for cosmetic surgical procedures is described here. Methods: Patients who developed RGM infections after undergoing cosmetic surgeries abroad and who pre...

  8. A novel culture medium for isolation of rapidly-growing mycobacteria from the sputum of patients with cystic fibrosis.

    Science.gov (United States)

    Preece, Clair L; Perry, Audrey; Gray, Bethany; Kenna, Dervla T; Jones, Amanda L; Cummings, Stephen P; Robb, Ali; Thomas, Matthew F; Brodlie, Malcolm; O'Brien, Christopher J; Bourke, Stephen J; Perry, John D

    2016-03-01

    Isolation of mycobacteria from the sputum of patients with cystic fibrosis (CF) is challenging due to the overgrowth of cultures by other bacteria and fungi. In this setting, Burkholderia cepacia selective agar (BCSA) has been recommended as a convenient and effective culture medium for the isolation of rapidly-growing, non-tuberculous mycobacteria (NTM). A novel selective culture medium (RGM medium) was evaluated for the isolation of rapidly-growing NTM from the sputum of children and adults with CF. A total of 118 isolates of rapidly-growing mycobacteria and 98 other bacteria and fungi were inoculated onto RGM medium. These were assessed for growth at 30°C over a seven day period. A total of 502 consecutive sputum samples were collected from 210 patients with CF. Each sample was homogenized and cultured onto RGM medium and also onto BCSA. Cultures were incubated for 10days at 30°C. Of 118 isolates of mycobacteria all but one grew well on RGM medium, whereas 94% of other bacteria and fungi were inhibited. A total of 55 sputum samples (from 33 distinct patients) yielded NTM using a combination of both RGM and BCSA (prevalence: 15.7%). NTM were recovered from 54 sputum samples using RGM medium compared with only 17 samples using BCSA (sensitivity 98% vs. 31%; P≤0.0001). A total of 419 isolates of non-mycobacteria were recovered from sputum samples on BCSA compared with 46 on RGM medium. RGM medium offers a simple and effective culture method for the isolation of rapidly-growing mycobacteria from sputum samples from patients with CF without decontamination of samples. RGM medium allows for the systematic screening of all sputum samples routinely referred for culture from patients with CF. Copyright © 2015 European Cystic Fibrosis Society. Published by Elsevier B.V. All rights reserved.

  9. An assessment of the maxilla after rapid maxillary expansion using cone beam computed tomography in growing children

    Directory of Open Access Journals (Sweden)

    Jessica L. Woller

    2014-01-01

    Full Text Available INTRODUCTION: With the advent of cone beam computed tomography (CBCT, it is now possible to quantitatively evaluate the effects of rapid maxillary expansion (RME on the entire maxillary complex in growing patients. OBJECTIVE: The purpose of this study is to use three-dimensional images to evaluate the displacement that occurs at the circummaxillary sutures (frontonasal, zygomaticomaxillary, intermaxillary, midpalatal, and transpalatal sutures following rapid maxillary expansion in growing children. METHODS: The CBCT scans of 25 consecutively treated RME patients (10 male, 15 female with mean age of 12.3 ± 2.6 years, were examined before expansion and immediately following the last activation of the expansion appliance. RESULTS: Statistically significant (P < 0.05 amounts of separation were found for the displacement of the bones of the frontonasal suture, the intermaxillary suture, the zygomaticomaxillary sutures, and the midpalatal suture. The change in angulation of the maxillary first molars due to RME was also statistically significant. There was no statistically significant displacement of the transpalatal suture. CONCLUSIONS: Rapid maxillary expansion results in significant displacement of the bones of circummaxillary sutures in growing children.

  10. The effectiveness of the use of metacognition-based industrial electronic learning tools in growing higher order thinking skills (HOTS

    Directory of Open Access Journals (Sweden)

    P. Purnamawati

    2017-07-01

    Full Text Available The aims of this research were to: (1 find out the response of students to metacognition-based industrial electronic learning in growing the ability of Higher Order Thinking Skills (HOTS in vocational secondary schools, (2 describe the learning outcomes of the students in the field of industrial electronics based on metacognition with direct learning method, and (3 generate the effectiveness of metacognition-based industrial electronics learning in growing HOTS capabilities in vocational secondary schools. The research was Quasi-experimental type, while the research design used Pretest-Posttest Control Design with the research subject was the students of Public Vocational Secondary Schools in Makassar City in the field of Industrial Electronics Expertise. Data collection techniques were conducted by questionnaire and learning outcomes test. The result showed that: (1 the students’ response of experimental class was higher that control class, (2 the learning outcomes of experimental class was higher than control class, and (3 the use of metacognition-based tools for industrial electronics learning was effective. This learning method could grow the HOTS capabilities of the students in solving the problems of industrial electronics circuit.

  11. Stress and Violence in the Workplace and on Campus: A Growing Problem for Business, Industry and Academia

    Science.gov (United States)

    Hunt, Matthew L.; Hughey, Aaron W.; Burke, Monica G.

    2012-01-01

    Levels of stress and violence at work have been increasing globally for the past few decades. Whether the setting is business and industry or a college campus, this disturbing trend affects a growing number of people, including those who do not work directly in these environments. In this paper the authors describe the relationship between stress…

  12. Rapidly- growing firms and their main characteristics: a longitudinal study from United States

    DEFF Research Database (Denmark)

    Keen, Christian; Etemad, Hamid

    2011-01-01

    This paper explores the topic of high-growth phenomenon and its agents. High-growth enterprises are primarily small and medium sized firms that attain very high-growth rates for at least five years. The paper presents a review of the pertinent literature to guide its formulation of hypotheses...... are relatively smaller enterprises and their high growth rates are not restricted to a particular location, industrial region, size or time period. The findings of this analysis point to a population of high-growth enterprises with diverse locations, sizes and times with important implications for scholarly...

  13. Rapidly growing cystic vestibular schwannoma with sudden onset facial palsy, ten years after subtotal excision.

    Science.gov (United States)

    Dandinarasaiah, Manjunath; Grinblat, Golda; Prasad, Sampath Chandra; Taibah, Abdelkader; Sanna, Mario

    2017-07-19

    An elderly male patient diagnosed with a right-sided cystic vestibular schwannoma (CVS) at our center underwent a translabyrinthine approach with a subtotal excision to preserve the facial nerve (FN). The tumor grew slowly for the first 9 years but in the subsequent 2 years grew rapidly, with the patient developing a FN paralysis. Using the previous approach, a second surgery was done and the tumor was excised, leaving behind a sheath of tumor on the facial and lower cranial nerves. This case demonstrates that CVSs show unpredictable growth patterns and need to be followed up for a longer period of time. Laryngoscope, 2017. © 2017 The American Laryngological, Rhinological and Otological Society, Inc.

  14. In-vitro evaluation of the adhesion to polypropylene sutures of non-pigmented, rapidly growing mycobacteria.

    Science.gov (United States)

    Zamora, N; Esteban, J; Kinnari, T J; Celdrán, A; Granizo, J J; Zafra, C

    2007-09-01

    The ability of non-pigmented, rapidly growing mycobacteria (NPRGM) to attach to polypropylene sutures was evaluated using an in-vitro assay. Thirty clinical isolates and five culture collection strains of NPRGM, together with Staphylococcus epidermidis ATCC 35983, were tested. Mycobacterium fortuitum and Mycobacterium chelonae showed the highest attachment ability, which differed significantly from the results obtained with Mycobacterium peregrinum. According to these results, NPRGM are able to attach to polypropylene sutures, and the species implicated most frequently in human infection showed increased levels of attachment in comparison with the other mycobacteria studied.

  15. A rapidly growing moraine-dammed glacial lake on Ngozumpa Glacier, Nepal

    Science.gov (United States)

    Thompson, Sarah S.; Benn, Douglas I.; Dennis, Kathryn; Luckman, Adrian

    2012-04-01

    Moraine-dammed glacial lakes are becoming increasingly common in the Himalaya as a result of glacier mass loss, causing concern about glacier lake outburst flood risk. In addition to extant lakes, the potential exists for many more to form, as more glaciers ablate down to the level of potential moraine dams. In this paper, we document the recent rapid growth of, a moraine-dammed lake on Ngozumpa Glacier, Nepal. Using a combination of ground-based mapping and sonar surveys, aerial photographs (< 1 m resolution), and ASTER imagery (15 m resolution), processes and rates of lake expansion have been determined. The lake first formed between 1984 and 1992 when collapse of an englacial conduit allowed water to accumulate at the level of a gap in the lateral moraine, ~km from the glacier terminus. Lake growth was initially slow, but since 2001 it has undergone exponential growth at an average rate of 10% y-1. In 2009, the lake area was 300,000 m2, and its volume was at least 2.2 million m3. Calving, subaqueous melting, and melting of subaerial ice faces all contribute to the expansion of the lake; but large-scale, full-height slab calving is now the dominant contributor to growth. Comparison with other lakes in the region indicate that lake growth will likely continue unchecked whilst the spillway remains at its current level and may attain a volume of hundreds of millions of cubic metres within the next few decades.

  16. Neonatal sepsis in a rapidly growing, tertiary neonatal intensive care unit: Trends over 18 years.

    Science.gov (United States)

    Heo, Ju Sun; Shin, Seung Han; Jung, Young Hwa; Kim, Ee-Kyung; Choi, Eun Hwa; Kim, Han-Suk; Lee, Hoan Jong; Choi, Jung-Hwan

    2015-10-01

    We investigated changes in the admission patterns of neonatal intensive care units and the epidemiology of neonatal sepsis following the rapid expansion and improvements in neonatal intensive care. Data on the admission of neonates with culture-proven sepsis between 1996 and 2013 (period I, 1996-2005; period II, 2006-2013) were collected retrospectively. The admission of extremely low-birthweight (ELBW) infants increased between periods I and II (11.1 vs 28.7 infants per 1000 live births, P sepsis among all infants and ELBW infants increased (all infants, 5.9 vs 12.7 cases per 1000 live births; ELBW infants, 189.5 vs 290.1 cases per 1000 live births). In ELBW infants, the incidence of sepsis caused by coagulase-negative Staphylococcus (CONS), significantly increased during period II (8.8 vs 25.4%, P = 0.039). On multivariate analysis, central vascular catheters and prolonged hospitalization were independently associated with increased sepsis rate, particularly CONS in ELBW infants. The inborn admission rate for ELBW infants has increased significantly and is accompanied by improved survival and longer hospital stay. The incidence of neonatal sepsis, particularly in ELBW infants, has also increased, and CONS has emerged as a major pathogen. Central vascular catheters and prolonged hospitalization could be independent risk factors for the increased sepsis rate, particularly sepsis due to CONS. © 2015 Japan Pediatric Society.

  17. Chlorophyll and pheophytin content in needles of different age of trees growing under conditions of chronic industrial pollution

    Directory of Open Access Journals (Sweden)

    Teresa Gowin

    2015-01-01

    Full Text Available Chlorophyll and pheophytin content was determined by means of Vernon method (Vernon, 1960 in needles of different age. Needles of Pinus strobus L., Pinus nigra Arnd., Pinus silvestris L., and Pseudotsuga menziesii Franco growing under conditions of chronic industrial pollution as well as under unpolluted conditions were examined. High pheophytin content was found in needles of trees growing under the conditions of chronic pollution. The youngest needles always showed the highest pheophytin content' as related to Chlorophyll content. The examined species showed different degree of Chlorophyll decomposition under the influence of polluted environment. Trees growing under control environment showed small and similar amounts of pheophytin in needles of different age. Pheophytin content does not seem to be a convenient indicator to test the effect of pollution before visual symptoms occur, since the method is very labourious and plant material very variable.

  18. Current Techniques of Growing Algae Using Flue Gas from Exhaust Gas Industry: a Review.

    Science.gov (United States)

    Huang, Guanhua; Chen, Feng; Kuang, Yali; He, Huan; Qin, An

    2016-03-01

    The soaring increase of flue gas emission had caused global warming, environmental pollution as well as climate change. Widespread concern on reduction of flue gas released from industrial plants had considered the microalgae as excellent biological materials for recycling the carbon dioxide directly emitted from exhaust industries. Microalgae also have the potential to be the valuable feedback for renewable energy production due to their high growth rate and abilities to sequester inorganic carbon through photosynthetic process. In this review article, we will illustrate important relative mechanisms in the metabolic processes of biofixation by microalgae and their recent experimental researches and advances of sequestration of carbon dioxide by microalgae on actual industrial and stimulate flue gases, novel photobioreactor cultivation systems as well as the perspectives and limitations of microalgal cultivation in further development.

  19. The Role of the Pharmaceutical Industry in Teaching Psychopharmacology: A Growing Problem

    Science.gov (United States)

    Brodkey, Amy C.

    2005-01-01

    OBJECTIVE: To describe and examine the role of the pharmaceutical industry in the teaching of psychopharmacology to residents and medical students and to make recommendations for changes in curriculum and policy based on these findings. METHODS: Literature reviews and discussions with experts, educators, and trainees. RESULTS: The pharmaceutical…

  20. Mycobacterium grossiae sp. nov., a rapidly growing, scotochromogenic species isolated from human clinical respiratory and blood culture specimens.

    Science.gov (United States)

    Paniz-Mondolfi, Alberto Enrique; Greninger, Alexander L; Ladutko, Lynn; Brown-Elliott, Barbara A; Vasireddy, Ravikiran; Jakubiec, Wesley; Vasireddy, Sruthi; Wallace, Richard J; Simmon, Keith E; Dunn, Bruce E; Jackoway, Gary; Vora, Surabhi B; Quinn, Kevin K; Qin, Xuan; Campbell, Sheldon

    2017-11-01

    A previously undescribed, rapidly growing, scotochromogenic species of the genus Mycobacterium (represented by strains PB739 T and GK) was isolated from two clinical sources - the sputum of a 76-year-old patient with severe chronic obstructive pulmonary disease, history of tuberculosis exposure and Mycobacterium avium complex isolated years prior; and the blood of a 15-year-old male with B-cell acute lymphoblastic leukaemia status post bone marrow transplant. The isolates grew as dark orange colonies at 25-37 °C after 5 days, sharing features in common with other closely related species. Analysis of the complete 16S rRNA gene sequence (1492 bp) of strain PB739 T demonstrated that the isolate shared 98.8 % relatedness with Mycobacterium wolinskyi. Partial 429 bp hsp65 and 744 bp rpoB region V sequence analyses revealed that the sequences of the novel isolate shared 94.8 and 92.1 % similarity with those of Mycobacterium neoaurum and Mycobacterium aurum, respectively. Biochemical profiling, antimicrobial susceptibility testing, HPLC/gas-liquid chromatography analyses and multilocus sequence typing support the taxonomic status of these isolates (PB739 T and GK) as representatives of a novel species. Both isolates were susceptible to the Clinical and Laboratory Standards Institute recommended antimicrobials for susceptibility testing of rapidly growing mycobacteria including amikacin, ciprofloxacin, moxifloxacin, doxycycline/minocycline, imipenem, linezolid, clarithromycin and trimethropin/sulfamethoxazole. Both isolates PB739 T and GK showed intermediate susceptibility to cefoxitin. We propose the name Mycobacterium grossiae sp. nov. for this novel species and have deposited the type strain in the DSMZ and CIP culture collections. The type strain is PB739 T (=DSM 104744 T =CIP 111318 T ).

  1. Rapidly growing Mycobacterium infections after cosmetic surgery in medical tourists: the Bronx experience and a review of the literature.

    Science.gov (United States)

    Cusumano, Lucas R; Tran, Vivy; Tlamsa, Aileen; Chung, Philip; Grossberg, Robert; Weston, Gregory; Sarwar, Uzma N

    2017-10-01

    Medical tourism is increasingly popular for elective cosmetic surgical procedures. However, medical tourism has been accompanied by reports of post-surgical infections due to rapidly growing mycobacteria (RGM). The authors' experience working with patients with RGM infections who have returned to the USA after traveling abroad for cosmetic surgical procedures is described here. Patients who developed RGM infections after undergoing cosmetic surgeries abroad and who presented at the Montefiore Medical Center (Bronx, New York, USA) between August 2015 and June 2016 were identified. A review of patient medical records was performed. Four patients who presented with culture-proven RGM infections at the sites of recent cosmetic procedures were identified. All patients were treated with a combination of antibiotics and aggressive surgical treatment. This case series of RGM infections following recent cosmetic surgeries abroad highlights the risks of medical tourism. Close monitoring of affected patients by surgical and infectious disease specialties is necessary, as aggressive surgical debridement combined with appropriate antibiotic regimens is needed to achieve cure. Given the increasing reports of post-surgical RGM infections, consultants should have a low threshold for suspecting RGM, as rapid diagnosis may accelerate the initiation of targeted treatment and minimize morbidity. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  2. Globalization of the pharmaceutical industry and the growing dependency of developing countries: the case of Turkey.

    Science.gov (United States)

    Semin, Semih; Güldal, Dilek

    2008-01-01

    In developing countries, the effect of globalization on the pharmaceutical sector has resulted in a decrease in exportation and domestic production, accompanied by an increase in importation of pharmaceuticals and a rise in prices and expenditures. As an example of a developing country, Turkey has been facing the long-standing and increasing pressure of global regulations placed on its pharmaceutical sector. This has led to an increasing dependency on multinational companies and a gradual deterioration of an already weakened domestic pharmaceutical sector. This case study of Turkey offers points to consider in the world of increasing globalization, as it offers lessons on ways of examining the effects of globalization on the pharmaceutical industry of developing countries.

  3. Managing the social impacts of the rapidly-expanding extractive industries in Greenland

    NARCIS (Netherlands)

    Hansen, Anne Merrild; Vanclay, Frank; Croal, Peter; Skjervedal, Anna Sofie Hurup

    2016-01-01

    The recent rapid expansion of extractive industries in Greenland is both causing high hopes for the future and anxieties among the local population. In the Arctic context, even small projects carry risks of major social impacts at local and national scales, and have the potential to severely affect

  4. Managing the social impacts of the rapidly expanding extractive industries in Greenland

    DEFF Research Database (Denmark)

    Hansen, Anne Merrild; Vanclay, Frank; Croal, Peter

    2016-01-01

    The recent rapid expansion of extractive industries in Greenland is both causing high hopes for the future and anxieties among the local population. In the Arctic context, even small projects carry risks of major social impacts at local and national scales, and have the potential to severely affect...

  5. The application of Rapid Manufacturing technologies in the spare parts industry

    OpenAIRE

    S. Hasan; Rennie, A. E. W.

    2008-01-01

    The advancement of Rapid Manufacturing (RM) has ushered the possibility of realising complex designs. This paper identifies the potential of possible applications of RM in the spare parts industry. It further underlines the need for a fully functional RM supply chain before proposing an e-business enabled business model for RM technologies.

  6. Mycobacterium oryzae sp. nov., a scotochromogenic, rapidly growing species is able to infect human macrophage cell line.

    Science.gov (United States)

    Ramaprasad, E V V; Rizvi, A; Banerjee, S; Sasikala, Ch; Ramana, Ch V

    2016-11-01

    Gram-stain-positive, acid-fast-positive, rapidly growing, rod-shaped bacteria (designated as strains JC290T, JC430 and JC431) were isolated from paddy cultivated soils on the Western Ghats of India. Phylogenetic analysis placed the three strains among the rapidly growing mycobacteria, being most closely related to Mycobacterium tokaiense 47503T (98.8 % 16S rRNA gene sequence similarity), Mycobacterium murale MA112/96T (98.8 %) and a few other Mycobacterium species. The level of DNA-DNA reassociation of the three strains with M. tokaiense DSM 44635T was 23.4±4 % (26.1±3 %, reciprocal analysis) and 21.4±2 % (22.1±4 %, reciprocal analysis). The three novel strains shared >99.9 % 16S rRNA gene sequence similarity and DNA-DNA reassociation values >85 %. Furthermore, phylogenetic analysis based on concatenated sequences (3071 bp) of four housekeeping genes (16S rRNA, hsp65, rpoB and sodA) revealed that strain JC290T is clearly distinct from all other Mycobacteriumspecies. The three strains had diphosphatidylglycerol, phosphatidylethanolamine, phosphatidylinositol, phosphatidylinositolmannosides, unidentified phospholipids, unidentified glycolipids and an unidentified lipid as polar lipids. The predominant isoprenoid quinone for all three strains was MK-9(H2). Fatty acids were C17 : 1ω7c, C16 : 0, C18 : 1ω9c, C16 : 1ω7c/C16 : 1ω6c and C19 : 1ω7c/C19 : 1ω6c for all the three strains. On the basis of phenotypic, chemotaxonomic and phylogenetic data, it was concluded that strains JC290T, JC430 and JC431 are members of a novel species within the genus Mycobacterium and for which the name Mycobacterium oryzae sp. nov. is proposed. The type strain is JC290T (=KCTC 39560T=LMG 28809T).

  7. Wine-growing establishment. A building complex serving an industrial model for a century (1870 – 1970

    Directory of Open Access Journals (Sweden)

    Lorena Manzini

    2013-06-01

    Full Text Available The wine industry in the province of Mendoza, Argentina as modern industrial was developed from the late nineteenth century. The decline starting in the 1970s, and triggered the second modernization wine since the 1980s. The functional requirements of the first modernization wine required both housing construction and production, giving rise to so-called wine-growing establishment. The wineries of these establishment, are the buildings used to make wine. The rest of the constructions are used as support for such activity. The functional units required in establishments, have varied over time, were adapted according to the different production needs of the moment. The wine-growing establishment that were built in this period can be found now adapted to the new requirements in production and operation, as well as in a complete abandonment. The group of buildings with various implements that are integrated testimonies, traces of other realities and knowledge that occurred in them before. Therefore, the aim to the present work is to perform a historical analysis of the evolution from architectural materiality 1870-1970; focused on understanding its growth and the distribution and location of the buildings, that they are closely integrated into the contextual framework belonging

  8. Miniaturized extinction culturing is the preferred strategy for rapid isolation of fast‐growing methane‐oxidizing bacteria

    Science.gov (United States)

    Hoefman, Sven; van der Ha, David; De Vos, Paul; Boon, Nico; Heylen, Kim

    2012-01-01

    Summary Methane‐oxidizing bacteria (MOB) have a large potential as a microbial sink for the greenhouse gas methane as well as for biotechnological purposes. However, their application in biotechnology has so far been hampered, in part due to the relative slow growth rate of the available strains. To enable the availability of novel strains, this study compares the isolation of MOB by conventional dilution plating with miniaturized extinction culturing, both performed after an initial enrichment step. The extinction approach rendered 22 MOB isolates from four environmental samples, while no MOB could be isolated by plating. In most cases, extinction culturing immediately yielded MOB monocultures making laborious purification redundant. Both type I (Methylomonas spp.) and type II (Methylosinus sp.) MOB were isolated. The isolated methanotrophic diversity represented at least 11 different strains and several novel species based on 16S rRNA gene sequence dissimilarity. These strains possessed the particulate (100%) and soluble (64%) methane monooxygenase gene. Also, 73% of the strains could be linked to a highly active fast‐growing mixed MOB community. In conclusion, miniaturized extinction culturing was more efficient in rapidly isolating numerous MOB requiring little effort and fewer materials, compared with the more widely applied plating procedure. This miniaturized approach allowed straightforward isolation and could be very useful for subsequent screening of desired characteristics, in view of their future biotechnological potential. PMID:22070783

  9. Mycobacterium saopaulense sp. nov., a rapidly growing mycobacterium closely related to members of the Mycobacterium chelonae--Mycobacterium abscessus group.

    Science.gov (United States)

    Nogueira, Christiane Lourenço; Whipps, Christopher M; Matsumoto, Cristianne Kayoko; Chimara, Erica; Droz, Sara; Tortoli, Enrico; de Freitas, Denise; Cnockaert, Margo; Palomino, Juan Carlos; Martin, Anandi; Vandamme, Peter; Leão, Sylvia Cardoso

    2015-12-01

    Five isolates of non-pigmented, rapidly growing mycobacteria were isolated from three patients and,in an earlier study, from zebrafish. Phenotypic and molecular tests confirmed that these isolates belong to the Mycobacterium chelonae-Mycobacterium abscessus group, but they could not be confidently assigned to any known species of this group. Phenotypic analysis and biochemical tests were not helpful for distinguishing these isolates from other members of the M. chelonae–M.abscessus group. The isolates presented higher drug resistance in comparison with other members of the group, showing susceptibility only to clarithromycin. The five isolates showed a unique PCR restriction analysis pattern of the hsp65 gene, 100 % similarity in 16S rRNA gene and hsp65 sequences and 1-2 nt differences in rpoB and internal transcribed spacer (ITS) sequences.Phylogenetic analysis of a concatenated dataset including 16S rRNA gene, hsp65, and rpoB sequences from type strains of more closely related species placed the five isolates together, as a distinct lineage from previously described species, suggesting a sister relationship to a group consisting of M. chelonae, Mycobacterium salmoniphilum, Mycobacterium franklinii and Mycobacterium immunogenum. DNA–DNA hybridization values .70 % confirmed that the five isolates belong to the same species, while values ,70 % between one of the isolates and the type strains of M. chelonae and M. abscessus confirmed that the isolates belong to a distinct species. The polyphasic characterization of these isolates, supported by DNA–DNA hybridization results,demonstrated that they share characteristics with M. chelonae–M. abscessus members, butconstitute a different species, for which the name Mycobacterium saopaulense sp. nov. is proposed. The type strain is EPM10906T (5CCUG 66554T5LMG 28586T5INCQS 0733T).

  10. Mycobacterium stephanolepidis sp. nov., a rapidly growing species related to Mycobacterium chelonae, isolated from marine teleost fish, Stephanolepis cirrhifer.

    Science.gov (United States)

    Fukano, Hanako; Wada, Shinpei; Kurata, Osamu; Katayama, Kinya; Fujiwara, Nagatoshi; Hoshino, Yoshihiko

    2017-08-01

    A previously undescribed rapidly growing, non-pigmented mycobacterium was identified based on biochemical and nucleic acid analyses, as well as growth characteristics. Seven isolates were cultured from samples collected from five thread-sail filefish (Stephanolepis cirrhifer) and two farmed black scraper (Thamnaconus modestus). Bacterial growth occurred at 15-35 °C on Middlebrook 7H11 agar. The bacteria were positive for catalase activity at 68 °C and urease activity, intermediate for iron uptake, and negative for Tween 80 hydrolysis, nitrate reduction, semi-quantitative catalase activity and arylsulfatase activity at day 3. No growth was observed on Middlebrook 7H11 agar supplemented with picric acid, and very little growth was observed in the presence of 5 % NaCl. α- and α'-mycolates were identified in the cell walls, and a unique profile of the fatty acid methyl esters and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) profiles of the protein and cell-wall lipids were acquired. Sequence analysis revealed that the seven isolates shared identical sequences for the 16S rRNA, rpoB, hsp65, recA and sodA genes. Phylogenetic analysis of the five gene sequences confirmed that the isolates were unique, but closely related to Mycobacterium chelonae. Antibiotic susceptibility testing revealed the minimum inhibitory concentration (MIC) of clarithromycin against this novel species was Mycobacterium salmoniphilum. The hsp65 PCR restriction enzyme analysis pattern differed from those of M. chelonae and M. salmoniphilum. Based on these findings, the name Mycobacterium stephanolepidis sp. nov. is proposed for this novel species, with the type strain being NJB0901T (=JCM 31611T=KCTC 39843T).

  11. Mycobacterium saopaulense sp. nov., a rapidly growing mycobacterium closely related to members of the Mycobacterium chelonae–Mycobacterium abscessus group

    Science.gov (United States)

    Nogueira, Christiane Lourenço; Whipps, Christopher M.; Matsumoto, Cristianne Kayoko; Chimara, Erica; Droz, Sara; Tortoli, Enrico; de Freitas, Denise; Cnockaert, Margo; Palomino, Juan Carlos; Martin, Anandi; Vandamme, Peter

    2015-01-01

    Five isolates of non-pigmented, rapidly growing mycobacteria were isolated from three patients and, in an earlier study, from zebrafish. Phenotypic and molecular tests confirmed that these isolates belong to the Mycobacterium chelonae–Mycobacterium abscessus group, but they could not be confidently assigned to any known species of this group. Phenotypic analysis and biochemical tests were not helpful for distinguishing these isolates from other members of the M. chelonae–M. abscessus group. The isolates presented higher drug resistance in comparison with other members of the group, showing susceptibility only to clarithromycin. The five isolates showed a unique PCR restriction analysis pattern of the hsp65 gene, 100 % similarity in 16S rRNA gene and hsp65 sequences and 1–2 nt differences in rpoB and internal transcribed spacer (ITS) sequences. Phylogenetic analysis of a concatenated dataset including 16S rRNA gene, hsp65, and rpoB sequences from type strains of more closely related species placed the five isolates together, as a distinct lineage from previously described species, suggesting a sister relationship to a group consisting of M. chelonae, Mycobacterium salmoniphilum, Mycobacterium franklinii and Mycobacterium immunogenum. DNA–DNA hybridization values >70 % confirmed that the five isolates belong to the same species, while values isolates and the type strains of M. chelonae and M. abscessus confirmed that the isolates belong to a distinct species. The polyphasic characterization of these isolates, supported by DNA–DNA hybridization results, demonstrated that they share characteristics with M. chelonae–M. abscessus members, but constitute a different species, for which the name Mycobacterium saopaulense sp. nov. is proposed. The type strain is EPM 10906T ( = CCUG 66554T = LMG 28586T = INCQS 0733T). PMID:26358475

  12. Emerging Genetic Counselor Roles within the Biotechnology and Pharmaceutical Industries: as Industry Interest Grows in Rare Genetic Disorders, How are Genetic Counselors Joining the Discussion?

    Science.gov (United States)

    Field, Tessa; Brewster, Stephanie Jo; Towne, Meghan; Campion, MaryAnn W

    2016-08-01

    Traditionally, the biotechnology and pharmaceutical industry (BPI) has focused drug development at the mass-market level targeting common medical issues. However, a recent trend is the development of therapies for orphan or rare disorders, including many genetic disorders. Developing treatments for genetic disorders requires an understanding of the needs of the community and translating genomic information to clinical and non-clinical audiences. The core skills of genetic counselors (GCs) include a deep knowledge of genetics and ability to communicate complex information to a broad audience, making GCs a choice fit for this shift in drug development. To date there is limited data defining the roles GCs hold within this industry. This exploratory study aimed to define the roles and motivation of GCs working in BPI, assess job satisfaction, and identify translatable skills and current gaps in GC training programs. The authors surveyed 26 GCs working in BPI in the United States; 79 % work for companies focused on rare disorders. GC positions in BPI are growing, with 57 % of respondents being the first GC in their role. GCs in BPI continue to utilize core genetic counseling competencies, though 72 % felt their training did not fully prepare them for BPI. These data suggest opportunities for exposure to BPI in GC training to better prepare future generations of GCs for these career opportunities. GC satisfaction was high in BPI, notably in areas traditionally reported as less satisfying on the National Society for Genetic Counselors Professional Status Survey: salary and advancement opportunities. BPI's growing interest in rare disorders represents a career opportunity for GCs, addressing both historic areas of dissatisfaction for GCs and BPI's genomic communication needs.

  13. Beauty : a growing industry

    Index Scriptorium Estoniae

    2005-01-01

    Läti kosmeetikafirma Baltic Cosmetic Holding plaanib 2006. aastal laieneda. Ettevõte omab kosmeetikakauplusi ja ilusalonge Baltimaades ja Venemaal. Uuringu kohaselt kulutavad eestlased ja lätlased kosmeetika peale 3,5 korda vähem raha kui teiste Euroopa Liidu riikide elanikud

  14. A Study of Postural Loading in Malaysian Mining Industry using Rapid Entire Body Assessment

    Directory of Open Access Journals (Sweden)

    Norhidayah M.S.

    2016-01-01

    Full Text Available The ergonomics and environment factors have been the core issue for the mining industry for many years, and its profiles are rising. To ensure an ergonomics work environment, it is possible to require specific attention especially in this industries sector. It is becoming increasingly difficult to ignore the essential issue in Malaysia due to lack of ergonomics knowledge and low awareness among the engineers in the mining sector. The focus of this study is to evaluate and validate the physical risk factor associated with work-related musculoskeletal disorder (WMSDs by using Rapid Entire Body Assessment (REBA among mining industry workers. All the physical risk factors involved the main body regions such as upper arm, lower arm, wrist, trunk, neck and leg that has been identified associated with WMSDs. There were 18 subjects were selected to involve in this study. Those subjects were chosen according to their job task. To increase the reliability of the result, each subject was evaluated thrice in the trials. From the analysis, the average of final score of the REBA is 8.24 indicates high risk and calls for engineering/or work method changes to reduce or eliminate muscular disorder risk. The results of the analysis were used to improve the process of work, design of workstation and also improving the work posture to enhance the comfort level of operators. This study is crucial among the mining industry that is a lack of the information and research about the ergonomics issues in the industry. The overall finding indicated that the whole process of selected work task will contribute to musculoskeletal disorder either for a short or long time exposure.

  15. RAPID-N: Assessing and mapping the risk of natural-hazard impact at industrial installations

    Science.gov (United States)

    Girgin, Serkan; Krausmann, Elisabeth

    2015-04-01

    Natural hazard-triggered technological accidents (so-called Natech accidents) at hazardous installations can have major consequences due to the potential for release of hazardous materials, fires and explosions. Effective Natech risk reduction requires the identification of areas where this risk is high. However, recent studies have shown that there are hardly any methodologies and tools that would allow authorities to identify these areas. To work towards closing this gap, the European Commission's Joint Research Centre has developed the rapid Natech risk assessment and mapping framework RAPID-N. The tool, which is implemented in an online web-based environment, is unique in that it contains all functionalities required for running a full Natech risk analysis simulation (natural hazards severity estimation, equipment damage probability and severity calculation, modeling of the consequences of loss of containment scenarios) and for visualizing its results. The output of RAPID-N are risk summary reports and interactive risk maps which can be used for decision making. Currently, the tool focuses on Natech risk due to earthquakes at industrial installations. However, it will be extended to also analyse and map Natech risk due to floods in the near future. RAPID-N is available at http://rapidn.jrc.ec.europa.eu. This presentation will discuss the results of case-study calculations performed for selected flammable and toxic substances to test the capabilities of RAPID-N both for single- and multi-site earthquake Natech risk assessment. For this purpose, an Istanbul earthquake scenario provided by the Turkish government was used. The results of the exercise show that RAPID-N is a valuable decision-support tool that assesses the Natech risk and maps the consequence end-point distances. These end-point distances are currently defined by 7 kPa overpressure for Vapour Cloud Explosions, 2nd degree burns for pool fire (which is equivalent to a heat radiation of 5 kW/m2 for 40s

  16. Regulation of the efflux of putrescine and cadaverine from rapidly growing cultured RAW 264 cells by extracellular putrescine.

    OpenAIRE

    Tjandrawinata, R R; Byus, C V

    1995-01-01

    Cultures of the macrophage-like RAW 264 cells were adapted to divide normally in a synthetic serum-supplemented culture medium lacking any polyamines and diamine oxidase activity. These rapidly dividing cells actively effluxed large amounts of putrescine and cadaverine, compared with the intracellular levels, into the culture medium. The efflux of putrescine was stimulated by the amino acid ornithine, whereas efflux of cadaverine was inhibited. Relatively low levels of spermidine and N1-acety...

  17. Rapidly growing Mycobacterium infections after cosmetic surgery in medical tourists: the Bronx experience and a review of the literature

    Directory of Open Access Journals (Sweden)

    Lucas R. Cusumano

    2017-10-01

    Conclusions: This case series of RGM infections following recent cosmetic surgeries abroad highlights the risks of medical tourism. Close monitoring of affected patients by surgical and infectious disease specialties is necessary, as aggressive surgical debridement combined with appropriate antibiotic regimens is needed to achieve cure. Given the increasing reports of post-surgical RGM infections, consultants should have a low threshold for suspecting RGM, as rapid diagnosis may accelerate the initiation of targeted treatment and minimize morbidity.

  18. Do farmers rapidly adapt to past growing conditions by sowing different proportions of early and late maturing cereals and cultivars?

    Directory of Open Access Journals (Sweden)

    Pirjo Peltonen-Sainio

    2013-10-01

    Full Text Available In the short growing season of the northernmost European growing conditions, farmers are increasingly interested in expanding cultivation of later maturing crops at the expense of early maturing ones with lower yields. In this study we aimed to assess how the switching between spring cereals that differ in earliness was associated with different external factors. This was tested using unique datasets for regional cropping areas and cultivar use for the last 15 years. Early maturing barley was favored at the expense of later maturing wheat when a high number of days to crop maturity was required in the preceding year. In contrast, farmers reduced the barley area when a high number of cumulated degree days was required for a crop to mature in the previous year. A shift was recorded from early to late maturing cultivars. This study indicated that despite limited opportunities for farmers to alter land use, they readily responded to past conditions and used the knowledge gained for decision-making to reduce risk. This is a valuable operative model for studying adaptation to opportunities and constraints induced by climate change.

  19. Monitoring Annual Urban Changes in a Rapidly Growing Portion of Northwest Arkansas with a 20-Year Landsat Record

    Directory of Open Access Journals (Sweden)

    Ryan Reynolds

    2017-01-01

    Full Text Available Northwest Arkansas has undergone a significant urban transformation in the past several decades and is considered to be one of the fastest growing regions in the United States. The urban area expansion and the associated demographic increases bring unprecedented pressure to the environment and natural resources. To better understand the consequences of urbanization, accurate and long-term depiction on urban dynamics is critical. Although urban mapping activities using remote sensing have been widely conducted, long-term urban growth mapping at an annual pace is rare and the low accuracy of change detection remains a challenge. In this study, a time series Landsat stack covering the period from 1995 to 2015 was employed to detect the urban dynamics in Northwest Arkansas via a two-stage classification approach. A set of spectral indices that have been proven to be useful in urban area extraction together with the original Landsat spectral bands were used in the maximum likelihood classifier and random forest classifier to distinguish urban from non-urban pixels for each year. A temporal trajectory polishing method, involving temporal filtering and heuristic reasoning, was then applied to the sequence of classified urban maps for further improvement. Based on a set of validation samples selected for five distinct years, the average overall accuracy of the final polished maps was 91%, which improved the preliminary classifications by over 10%. Moreover, results from this study also indicated that the temporal trajectory polishing method was most effective with initial low accuracy classifications. The resulting urban dynamic map is expected to provide unprecedented details about the area, spatial configuration, and growing trends of urban land-cover in Northwest Arkansas.

  20. Growing City and Rapid Land Use Transition: Assessing Multiple Hazards and Risks in the Pokhara Valley, Nepal

    Directory of Open Access Journals (Sweden)

    Bhagawat Rimal

    2015-10-01

    Full Text Available Pokhara is one of the most naturally beautiful cities in the world with a unique geological setting. This important tourist city is under intense pressure from rapid urbanization and population growth. Multiple hazards and risks are rapidly increasing in Pokhara due to unsustainable land use practices, particularly the increase in built-up areas. This study examines the relationship among urbanization, land use/land cover dynamics and multiple hazard and risk analysis of the Pokhara valley from 1990 to 2013. We investigate some of the active hazards, such as floods, landslides, fire, sinkholes, land subsidence and earthquakes, and prepare an integrated multiple hazard risk map indicating the highly vulnerable zones. Land use and land cover maps from 1990 and 2013 from Landsat images (30 m resolution have been prepared and analyzed for the spatial dynamics of urbanization and the transition of land use and land cover. In the 23-year period, the built-up area more than doubled from 24.03 km² to 54.20 km². Although the landscape in the urban, peri-urban and rural areas appears to be fragmented, different drivers play pivotal roles in landscape change in these areas. The results provide substantial information for establishing innovative action plans for disaster risk management in the valley. Recommendations are made for the most suitable places for future urban expansion in the valley. This study is important for raising awareness among policy makers and other public officials to include multiple hazard risk mitigation in land use policies and plans. Establishing connections between urban expansions, escalating population growth and multiple hazards and risk assessment will also improve in modelling the latent impact of future catastrophes and emergency preparedness.

  1. An aerosol climatology for a rapidly growing arid region (southern Arizona): Major aerosol species and remotely sensed aerosol properties.

    Science.gov (United States)

    Sorooshian, Armin; Wonaschütz, Anna; Jarjour, Elias G; Hashimoto, Bryce I; Schichtel, Bret A; Betterton, Eric A

    2011-10-01

    This study reports a comprehensive characterization of atmospheric aerosol particle properties in relation to meteorological and back trajectory data in the southern Arizona region, which includes two of the fastest growing metropolitan areas in the United States (Phoenix and Tucson). Multiple data sets (MODIS, AERONET, OMI/TOMS, MISR, GOCART, ground-based aerosol measurements) are used to examine monthly trends in aerosol composition, aerosol optical depth (AOD), and aerosol size. Fine soil, sulfate, and organics dominate PM2.5 mass in the region. Dust strongly influences the region between March and July owing to the dry and hot meteorological conditions and back trajectory patterns. Because monsoon precipitation begins typically in July, dust levels decrease, while AOD, sulfate, and organic aerosol reach their maximum levels because of summertime photochemistry and monsoon moisture. Evidence points to biogenic volatile organic compounds being a significant source of secondary organic aerosol in this region. Biomass burning also is shown to be a major contributor to the carbonaceous aerosol budget in the region, leading to enhanced organic and elemental carbon levels aloft at a sky-island site north of Tucson (Mt. Lemmon). Phoenix exhibits different monthly trends for aerosol components in comparison with the other sites owing to the strong influence of fossil carbon and anthropogenic dust. Trend analyses between 1988 and 2009 indicate that the strongest statistically significant trends are reductions in sulfate, elemental carbon, and organic carbon, and increases in fine soil during the spring (March-May) at select sites. These results can be explained by population growth, land-use changes, and improved source controls.

  2. A Multi-Level Approach to Modeling Rapidly Growing Mega-Regions as a Coupled Human-Natural System

    Science.gov (United States)

    Koch, J. A.; Tang, W.; Meentemeyer, R. K.

    2013-12-01

    concept of our modeling approach and describe its strengths and weaknesses. We furthermore use empirical data for the states of North and South Carolina to demonstrate how the modeling framework can be applied to a large, heterogeneous study system with diverse decision-making agents. Grimm et al. (2005) Pattern-Oriented Modeling of Agent-Based Complex Systems: Lessons from Ecology. Science 310, 987-991. Liu et al. (2013) Framing Sustainability in a Telecoupled World. Ecology and Society 18(2), 26. Meentemeyer et al. (2013) FUTURES: Multilevel Simulations of Merging Urban-Rural Landscape Structure Using a Stochastic Patch-Growing Algorithm. Annals of the Association of American Geographers 103(4), 785-807.

  3. Changes in Tree Ring Width and Density of Pinus thunbergii Growing in the Vicinity of Industrial Complex in Korea

    OpenAIRE

    Jong-Kab, Kim; Kazumi, Fukazawa; Department of Forestry, Gyeongsang National University; Department of Forest Science Hokkaido University

    1997-01-01

    There has been a decline in tree growth since the operation of factories at Pinus thunbergii forests around a petrochemical industrial complex in Korea. This study was carried out to investigate the effects of air pollution on tree ring width and ring density of Pinus thunbergii. Soft X-ray densitometrical method was used. Decline of ring width was the highest during 3 years immediately after the operation of factories. The percentage of decrease was almost bigger immediately after operation ...

  4. Bioaccumulation of {sup 226}Ra by plants growing in fresh water ecosystem around the uranium industry at Jaduguda, India

    Energy Technology Data Exchange (ETDEWEB)

    Jha, V.N., E-mail: jhavn1971@gmail.co [Environmental Assessment Division, Bhabha Atomic Research Centre, Mumbai-400085 (India); Tripathi, R.M., E-mail: tripathirm@yahoo.co [Environmental Assessment Division, Bhabha Atomic Research Centre, Mumbai-400085 (India); Sethy, N.K.; Sahoo, S.K.; Shukla, A.K.; Puranik, V.D. [Environmental Assessment Division, Bhabha Atomic Research Centre, Mumbai-400085 (India)

    2010-09-15

    A field study has been conducted to evaluate the {sup 226}Ra bioaccumulation among aquatic plants growing in the stream/river adjoining the uranium mining and ore-processing complex at Jaduguda, India. Two types of plant group have been investigated namely free floating algal species submerged into water and plants rooted in stream and riverbed. The highest {sup 226}Ra activity concentration (9850 Bq kg{sup -1}) was found in filamentous algae growing in the residual water of tailings pond. The concentration ratios of {sup 226}Ra in filamentous algae (activity concentration of {sup 226}Ra in plant Bq kg{sup -1} fresh weight/activity concentration of {sup 226}Ra in water Bq l{sup -1}) widely varied i.e. from 1.1 x 10{sup 3} to 8.6 x 10{sup 4}. Other aquatic plants were also showing wide variability in the {sup 226}Ra activity concentration. The ln-transformed filamentous algae {sup 226}Ra activity concentration was significantly correlated with that of ln-transformed water concentration (r = 0.89, p < 0.001). There was no correlation between the activity concentrations of {sup 226}Ra in stream/riverbed rooted plants and the substrate. For this group, correlation between {sup 226}Ra activity concentration and Mn, Fe, Cu concentration in plants were statistically significant.

  5. [Rapid growing liposarcoma in retroperitoneum

    DEFF Research Database (Denmark)

    Engel, L.E.; Mynster, T.

    2008-01-01

    inhomogeneous tumour adhesive to the right kidney capsule was removed in toto from retroperitoneum. Histological diagnosis: Sclerosing, low differentiated liposarcoma. Besides radical surgery only radiation therapy may have effect in treatment of retroperitoneal soft tissue sarcomas Udgivelsesdato: 2008/9/29...

  6. Industrial-age changes in atmospheric [CO2] and temperature differentially alter responses of faster- and slower-growing Eucalyptus seedlings to short-term drought.

    Science.gov (United States)

    Lewis, James D; Smith, Renee A; Ghannoum, Oula; Logan, Barry A; Phillips, Nathan G; Tissue, David T

    2013-05-01

    Climate change may alter forest composition by differentially affecting the responses of faster- and slower-growing tree species to drought. However, the combined effects of rising atmospheric CO2 concentration ([CO2]) and temperature on drought responses of trees are poorly understood. Here, we examined interactive effects of temperature (ambient, ambient + °C) and [CO2] (290, 400 and 650mu;l l(-1)) on drought responses of Eucalyptus saligna Sm. (faster-growing) and E. sideroxylon A. Cunn. ex Woolls (slower-growing) seedlings. Drought was imposed via a controlled reduction in soil water over 1-2 weeks, re-watering seedlings when leaves visibly wilted. In ambient temperature, the effect of drought on the light-saturated net photosynthetic rate (Asat) in E. saligna decreased as [CO2] increased from pre-industrial to future concentrations, but rising [CO2] did not affect the response in Eucalyptus sideroxylon. In contrast, elevated temperature exacerbated the effect of drought in reducing Asat in both species. The drought response of Asat reflected changes in stomatal conductance (gs) associated with species and treatment differences in (i) utilization of soil moisture and (ii) leaf area ratio (leaf area per unit plant dry mass). Across [CO2] and temperature treatments, E. saligna wilted at higher soil water potentials compared with E. sideroxylon. Photosynthetic recovery from drought was 90% complete 2 days following re-watering across all species and treatments. Our results suggest that E. saligna (faster-growing) seedlings are more susceptible to drought than E. sideroxylon (slower-growing) seedlings. The greater susceptibility to drought of E. saligna reflected faster drawdown of soil moisture, associated with more leaf area and leaf area ratio, and the ability of E. sideroxylon to maintain higher gs at a given soil moisture. Inclusion of a pre-industrial [CO2] treatment allowed us to conclude that susceptibility of these species to short-term drought

  7. Rapid, accurate, and comparative differentiation of clinically and industrially relevant microorganisms via multiple vibrational spectroscopic fingerprinting.

    Science.gov (United States)

    Muhamadali, Howbeer; Subaihi, Abdu; Mohammadtaheri, Mahsa; Xu, Yun; Ellis, David I; Ramanathan, Rajesh; Bansal, Vipul; Goodacre, Royston

    2016-08-15

    Despite the fact that various microorganisms (e.g., bacteria, fungi, viruses, etc.) have been linked with infectious diseases, their crucial role towards sustaining life on Earth is undeniable. The huge biodiversity, combined with the wide range of biochemical capabilities of these organisms, have always been the driving force behind their large number of current, and, as of yet, undiscovered future applications. The presence of such diversity could be said to expedite the need for the development of rapid, accurate and sensitive techniques which allow for the detection, differentiation, identification and classification of such organisms. In this study, we employed Fourier transform infrared (FT-IR), Raman, and surface enhanced Raman scattering (SERS) spectroscopies, as molecular whole-organism fingerprinting techniques, combined with multivariate statistical analysis approaches for the classification of a range of industrial, environmental or clinically relevant bacteria (P. aeruginosa, P. putida, E. coli, E. faecium, S. lividans, B. subtilis, B. cereus) and yeast (S. cerevisiae). Principal components-discriminant function analysis (PC-DFA) scores plots of the spectral data collected from all three techniques allowed for the clear differentiation of all the samples down to sub-species level. The partial least squares-discriminant analysis (PLS-DA) models generated using the SERS spectral data displayed lower accuracy (74.9%) when compared to those obtained from conventional Raman (97.8%) and FT-IR (96.2%) analyses. In addition, whilst background fluorescence was detected in Raman spectra for S. cerevisiae, this fluorescence was quenched when applying SERS to the same species, and conversely SERS appeared to introduce strong fluorescence when analysing P. putida. It is also worth noting that FT-IR analysis provided spectral data of high quality and reproducibility for the whole sample set, suggesting its applicability to a wider range of samples, and perhaps the

  8. Does growing up with a physician influence the ethics of medical students' relationships with the pharmaceutical industry? The cases of the US and Poland.

    Science.gov (United States)

    Makowska, Marta

    2017-08-10

    Medical schools have a major impact on future doctors' ethics and their attitudes towards cooperation with the pharmaceutical industry. From childhood, medical students who are related to a physician are exposed to the characteristics of a medical career and learn its professional ethics not only in school but also in the family setting. The present paper sought to answer the research question: 'How does growing up with a physician influence medical students' perceptions of conflicts of interest in their relationships with industry?' An anonymous questionnaire was completed by 451 medical students from four Philadelphia medical schools and 554 medical students from Warsaw Medical University during 2013. Medical schools in these two cities were chosen because they are both university cities with similar population sizes. Students who had and who did not have a family member working as a physician were compared using chi-square analysis. Data were analysed for each country separately. For both the US and Poland, there were statistically significant differences (p < .05) between medical students with a physician as a family member and other students with respect to views regarding relationship with the pharmaceutical industry. In both groups, this difference occurred for three important dimensions: students' relationship with the pharmaceutical industry; students' views on physicians' rights to cooperate with the pharmaceutical industry; trust in the pharmaceutical industry. In the US, students related to a doctor were characterized by more restrictive opinions on all three dimensions than other students (e.g., 27.8% of the former students vs. 31.4% of the latter students thought doctors had unrestricted rights to cooperate with the industry). However, the contrary was observed in Poland: students with a physician in the family had less strict views than their colleagues (e.g., 56.8% of the former vs. 39.7% of the latter thought that doctors should have unrestricted

  9. Do teachers and students get the Ed-Tech products they need: The challenges of Ed-Tech procurement in a rapidly growing market

    Directory of Open Access Journals (Sweden)

    Jennifer Morrison

    2015-03-01

    Full Text Available Ed-tech courseware products to support teaching and learning are being developed and made available for acquisition by school districts at a rapid rate. In this growing market, developers and providers face challenges with making their products visible to customers, while school district stakeholders must grapple with “discovering” which products of the many available best address their instructional needs. The present study presents the experiences with and perceptions about the procurement process from 47 superintendents representing diverse school districts in the U. S. Results indicate that, while improvements are desired in many aspects of the procurement process, the superintendents, overall, believe that, once desired products are identified, they are generally able to acquire them. Difficulties lie in tighter budgets, discovering products that are potentially the best choices, and evaluating the effectiveness of the products selected as options. These findings are presented and interpreted in relation to five major “Action Points” in the procurement process, and also with regard to implications for evaluating how educational technology impacts K-12 instruction.

  10. In Vitro Comparison of Ertapenem, Meropenem, and Imipenem against Isolates of Rapidly Growing Mycobacteria and Nocardia by Use of Broth Microdilution and Etest.

    Science.gov (United States)

    Brown-Elliott, Barbara A; Killingley, Jessica; Vasireddy, Sruthi; Bridge, Linda; Wallace, Richard J

    2016-06-01

    We compared the activities of the carbapenems ertapenem, meropenem, and imipenem against 180 isolates of rapidly growing mycobacteria (RGM) and 170 isolates of Nocardia using the Clinical and Laboratory Standards Institute (CLSI) guidelines. A subset of isolates was tested using the Etest. The rate of susceptibility to ertapenem and meropenem was limited and less than that to imipenem for the RGM. Analysis of major and minor discrepancies revealed that >90% of the isolates of Nocardia had higher MICs by the broth microdilution method than by Etest, in contrast to the lower broth microdilution MICs seen for >80% of the RGM. Imipenem remains the most active carbapenem against RGM, including Mycobacterium abscessus subsp. abscessus For Nocardia, imipenem was significantly more active only against Nocardia farcinica Although there may be utility in testing the activities of the newer carbapenems against Nocardia, their activities against the RGM should not be routinely tested. Testing by Etest is not recommended by the CLSI. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

  11. Rapid analysis of inner and outer bark composition of southern yellow pine bark from industrial sources

    Science.gov (United States)

    Chi-Leung So; Thomas L. Eberhardt

    2006-01-01

    Differences in bark chemistry between inner and outer bark are well known and may affect the suitability of various bark supplies for a particular application. Accordingly, there is a need for quality control protocols to assess variability and predict product yields. Southern yellow pine bark samples from two industrial sources were separated into inner and outer bark...

  12. Sources of heavy metal pollution in agricultural soils of a rapidly industrializing area in the Yangtze Delta of China.

    Science.gov (United States)

    Xu, Xianghua; Zhao, Yongcun; Zhao, Xiaoyan; Wang, Yudong; Deng, Wenjing

    2014-10-01

    The rapid industrialization and urbanization in developing countries have increased pollution by heavy metals, which is a concern for human health and the environment. In this study, 230 surface soil samples (0-20cm) were collected from agricultural areas of Jiaxing, a rapidly industrializing area in the Yangtze Delta of China. Sequential Gaussian simulation (SGS) and multivariate factorial kriging analysis (FKA) were used to identify and explore the sources of heavy metal pollution for eight metals (Cu, Zn, Pb, Cr, Ni, Cd, Hg and As). Localized hot-spots of pollution were identified for Cu, Zn, Pb, Cr, Ni and Cd with area percentages of 0.48 percent, 0.58 percent, 2.84 percent, 2.41 percent, 0.74 percent, and 0.68 percent, respectively. The areas with Hg pollution covered approximately 38 percent whereas no potential pollution risk was found for As. The soil parent material and point sources of pollution had significant influences on Cr, Ni, Cu, Zn and Cd levels, except for the influence of agricultural management practices also accounted for micro-scale variations (nugget effect) for Cu and Zn pollution. Short-range (4km) diffusion processes had a significant influence on Cu levels, although they did not appear to be the dominant sources of Zn and Cd variation. The short-range diffusion pollution arising from current and historic industrial emissions and urbanization, and long-range (33km) variations in soil parent materials and/or diffusion jointly determined the current concentrations of soil Pb. The sources of Hg pollution risk may be attributed to the atmosphere deposition of industrial emission and historical use of Hg-containing pesticides. Copyright © 2014 Elsevier Inc. All rights reserved.

  13. Evaluation of capillary and myofiber density in the pectoralis major muscles of rapidly growing, high-yield broiler chickens during increased heat stress.

    Science.gov (United States)

    Joiner, K S; Hamlin, G A; Lien, A R J; Bilgili, S F

    2014-09-01

    Skeletal muscle development proceeds from early embryogenesis through marketing age in broiler chickens. While myofiber formation is essentially complete at hatching, myofiber hypertrophy can increase after hatch by assimilation of satellite cell nuclei into myofibers. As the diameter of the myofibers increases, capillary density peripheral to the myofiber is marginalized, limiting oxygen supply and subsequent diffusion into the myofiber, inducing microischemia. The superficial and deep pectoralis muscles constitute 25% of the total body weight in a market-age bird; thus compromise of those muscle groups can have profound economic impact on broiler production. We hypothesized that marginal capillary support relative to the hypertrophic myofibers increases the incidence of microischemia, especially in contemporary high-yield broilers under stressing conditions such as high environmental temperatures. We evaluated the following parameters in four different broiler strains at 39 and 53 days of age when reared under thermoneutral (20 to 25 C) versus hot (30 to 35 C) environmental conditions: capillary density, myofiber density and diameter, and degree of myodegeneration. Our data demonstrate that myofiber diameter significantly increased with age (P > or = 0.0001), while the absolute numbers of capillaries, blood vessels, and myofibers visible in five 400 x microscopic fields decreased (P > or = 0.0001). This is concomitant with marginalization of vascular support in rapidly growing myofibers. The myofiber diameter was significantly lower with hot environmental temperatures (P > or = 0.001); therefore, the absolute number of myofibers visible in five 400X microscopic fields was significantly higher. The incidence and subjective degree of myodegeneration characterized by loss of cross-striations, myocyte hyperrefractility, sarcoplasmic vacuolation, and nuclear pyknosis or loss also increased in hot conditions. Differences among strains were not observed.

  14. Point-of-use membrane filtration and hyperchlorination to prevent patient exposure to rapidly growing mycobacteria in the potable water supply of a skilled nursing facility.

    Science.gov (United States)

    Williams, Margaret M; Chen, Tai-Ho; Keane, Tim; Toney, Nadege; Toney, Sean; Armbruster, Catherine R; Butler, W Ray; Arduino, Matthew J

    2011-09-01

    Healthcare-associated outbreaks and pseudo-outbreaks of rapidly growing mycobacteria (RGM) are frequently associated with contaminated tap water. A pseudo-outbreak of Mycobacterium chelonae-M. abscessus in patients undergoing bronchoscopy was identified by 2 acute care hospitals. RGM was identified in bronchoscopy specimens of 28 patients, 25 of whom resided in the same skilled nursing facility (SNF). An investigation ruled out bronchoscopy procedures, specimen collection, and scope reprocessing at the hospitals as sources of transmission. To identify the reservoir for RGM within the SNF and evaluate 2 water system treatments, hyperchlorination and point-of-use (POU) membrane filters, to reduce RGM. A comparative in situ study of 2 water system treatments to prevent RGM transmission. An SNF specializing in care of patients requiring ventilator support. RGM and heterotrophic plate count (HPC) bacteria were examined in facility water before and after hyperchlorination and in a subsequent 24-week assessment of filtered water by colony enumeration on Middlebrook and R2A media. Mycobacterium chelonae was consistently isolated from the SNF water supply. Hyperchlorination reduced RGM by 1.5 log(10) initially, but the population returned to original levels within 90 days. Concentration of HPC bacteria also decreased temporarily. RGM were reduced below detection level in filtered water, a 3-log(10) reduction. HPC bacteria were not recovered from newly installed filters, although low quantities were found in water from 2-week-old filters. POU membrane filters may be a feasible prevention measure for healthcare facilities to limit exposure of sensitive individuals to RGM in potable water systems.

  15. Rapid transient expression of human granulocyte-macrophage colony-stimulating factor in two industrial cultivars of tobacco (Nicotiana tabacum L.) by agroinfiltration

    OpenAIRE

    Vojta, Lea; Ljuma-Skupnjak, Lana; Budimir, Ankica; Vukičević, Slobodan; Fulgosi, Hrvoje

    2015-01-01

    We report the production of hGM-CSF cytokine in leaves of industrial tobacco cultivars DH-17 and DH-27 by using Agrobacterium-mediated transient expression. We prove the concept that very high biomass industrial tobacco plants are suitable platforms for rapid, low cost production of foreign proteins. Successful transient expression of the GM-CSF was achieved in less than three months, opening the possibility for future applications of this approach in rapid response production of various prot...

  16. Stormwater Runoff Pollutant Loading Distributions and Their Correlation with Rainfall and Catchment Characteristics in a Rapidly Industrialized City

    Science.gov (United States)

    Li, Dongya; Wan, Jinquan; Ma, Yongwen; Wang, Yan; Huang, Mingzhi; Chen, Yangmei

    2015-01-01

    Fast urbanization and industrialization in developing countries result in significant stormwater runoff pollution, due to drastic changes in land-use, from rural to urban. A three-year study on the stormwater runoff pollutant loading distributions of industrial, parking lot and mixed commercial and residential catchments was conducted in the Tongsha reservoir watershed of Dongguan city, a typical, rapidly industrialized urban area in China. This study presents the changes in concentration during rainfall events, event mean concentrations (EMCs) and event pollution loads per unit area (EPLs). The first flush criterion, namely the mass first flush ratio (MFFn), was used to identify the first flush effects. The impacts of rainfall and catchment characterization on EMCs and pollutant loads percentage transported by the first 40% of runoff volume (FF40) were evaluated. The results indicated that the pollutant wash-off process of runoff during the rainfall events has significant temporal and spatial variations. The mean rainfall intensity (I), the impervious rate (IMR) and max 5-min intensity (Imax5) are the critical parameters of EMCs, while Imax5, antecedent dry days (ADD) and rainfall depth (RD) are the critical parameters of FF40. Intercepting the first 40% of runoff volume can remove 55% of TSS load, 53% of COD load, 58% of TN load, and 61% of TP load, respectively, according to all the storm events. These results may be helpful in mitigating stormwater runoff pollution for many other urban areas in developing countries. PMID:25774922

  17. Moving Toward Quantifying Reliability - The Next Step in a Rapidly Maturing PV Industry: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, Sarah; Sample, Tony; Wohlgemuth, John; Zhou, Wei; Bosco, Nick; Althaus, Joerg; Phillips, Nancy; Deceglie, Michael; Flueckiger, Chris; Hacke, Peter; Miller, David; Kempe, Michael; Yamamichi, Masaaki; Kondo, Michio

    2015-12-07

    Some may say that PV modules are moving toward being a simple commodity, but most major PV customers ask: 'How can I minimize chances of a module recall?' Or, 'How can I quantify the added value of a 'premium' module?' Or, 'How can I assess the value of an old PV system that I'm thinking of purchasing?' These are all questions that PVQAT (the International PV Quality Assurance Task Force) and partner organizations are working to answer. Defining standard methods for ensuring minimal acceptable quality of PV modules, differentiating modules that provide added value in the toughest of environments, and creating a process (e.g. through IECRE [1]) that can follow a PV system from design through installation and operation are tough tasks, but having standard approaches for these will increase confidence, reduce costs, and be a critical foundation of a mature PV industry. This paper summarizes current needs for new tests, some challenges for defining those tests, and some of the key efforts toward development of international standards, emphasizing that meaningful quantification of reliability (as in defining a service life prediction) must be done in the context of a specific product with design parameters defined through a quality management system.

  18. A Rapid Coordinate Transformation Method Applied in Industrial Robot Calibration Based on Characteristic Line Coincidence

    Directory of Open Access Journals (Sweden)

    Bailing Liu

    2016-02-01

    Full Text Available Coordinate transformation plays an indispensable role in industrial measurements, including photogrammetry, geodesy, laser 3-D measurement and robotics. The widely applied methods of coordinate transformation are generally based on solving the equations of point clouds. Despite the high accuracy, this might result in no solution due to the use of ill conditioned matrices. In this paper, a novel coordinate transformation method is proposed, not based on the equation solution but based on the geometric transformation. We construct characteristic lines to represent the coordinate systems. According to the space geometry relation, the characteristic line scan is made to coincide by a series of rotations and translations. The transformation matrix can be obtained using matrix transformation theory. Experiments are designed to compare the proposed method with other methods. The results show that the proposed method has the same high accuracy, but the operation is more convenient and flexible. A multi-sensor combined measurement system is also presented to improve the position accuracy of a robot with the calibration of the robot kinematic parameters. Experimental verification shows that the position accuracy of robot manipulator is improved by 45.8% with the proposed method and robot calibration.

  19. Rapid transient expression of human granulocyte-macrophage colony-stimulating factor in two industrial cultivars of tobacco (Nicotiana tabacum L. by agroinfiltration

    Directory of Open Access Journals (Sweden)

    Lea Vojta

    2015-09-01

    Full Text Available We report the production of hGM-CSF cytokine in leaves of industrial tobacco cultivars DH-17 and DH-27 by using Agrobacterium-mediated transient expression. We prove the concept that very high biomass industrial tobacco plants are suitable platforms for rapid, low cost production of foreign proteins. Successful transient expression of the GM-CSF was achieved in less than three months, opening the possibility for future applications of this approach in rapid response production of various proteins of non-plant origin in industrial tobacco.

  20. Applying green analytical chemistry for rapid analysis of drugs: Adding health to pharmaceutical industry

    Directory of Open Access Journals (Sweden)

    Nazrul Haq

    2017-02-01

    Full Text Available Green RP-HPLC method for a rapid analysis of olmesartan medoxomil (OLM in bulk drugs, self-microemulsifying drug delivery system (SMEDDS and marketed tablets was developed and validated in the present investigation. The chromatographic identification was achieved on Lichrosphere 250 × 4.0 mm RP C8 column having a 5 μm packing as a stationary phase using a combination of green solvents ethyl acetate:ethanol (50:50% v/v as a mobile phase, at a flow rate of 1.0 mL/min with UV detection at 250 nm. The proposed method was validated for linearity, selectivity, accuracy, precision, reproducibility, robustness, sensitivity and specificity. The utility of the proposed method was verified by an assay of OLM in SMEDDS and commercial tablets. The proposed method was found to be selective, precise, reproducible, accurate, robust, sensitive and specific. The amount of OLM in SMEDDS and commercial tablets was found to be 101.25% and 98.67% respectively. The proposed method successfully resolved OLM peak in the presence of its degradation products which indicated stability-indicating property of the proposed method. These results indicated that the proposed method can be successfully employed for a routine analysis of OLM in bulk drugs and commercial formulations.

  1. Rapid and not culture-dependent assay based on multiplex PCR-SSR analysis for monitoring inoculated yeast strains in industrial wine fermentations.

    Science.gov (United States)

    Cordero-Bueso, Gustavo; Rodríguez, María Esther; Garrido, Carlos; Cantoral, Jesús Manuel

    2017-01-01

    Wine industry needs a simple method for rapid diagnosis of the dominance of inoculated strains that could be performed routinely during the fermentation process. We present a suitable, high-throughput, and low-cost method to monitor rapidly the dominance of inoculated yeast strains in industrial fermentations of red and white wines using an activated carbon cleaning pretreatment, and a rapid DNA extraction method plus multiplex PCR-SSR analysis. We apply this technique directly to samples of fermenting wines without previously isolating yeast colonies. Results are obtained in a maximum time of 4.5 h.

  2. Industrialization

    OpenAIRE

    Blundel, Richard

    2016-01-01

    Industrialization, the historical development that saw cheesemaking transformed from a largely craft-based or artisanal activity, often located on a dairy farm, to a production process that, for the most part, takes place in large ‘cheese factories’ or creameries [See ARTISANAL]. The principal features of modern industrialized cheesemaking, which set it apart from traditional approaches include: high production volumes; sourcing of milk from multiple dairy herds; pasteurization and re-balanci...

  3. Research of Cruise Industry Development Bottlenecks In China

    OpenAIRE

    Ping Zhou

    2014-01-01

    Cruise industry is a comprehensive new industry, which has a strong impetus to the development of other industries. In recent years, as the explosive growth in cruise market, China has become a global rapidly-growing emerging cruise market. The cruise industry has begun transiting from infancy to the development phase, in all likelihood facing a number of bottlenecks problem. In this paper, the development trend of the cruise industry is first analyzed, then the bottlenecks of cruise industry...

  4. Industry

    Energy Technology Data Exchange (ETDEWEB)

    Bernstein, Lenny; Roy, Joyashree; Delhotal, K. Casey; Harnisch, Jochen; Matsuhashi, Ryuji; Price, Lynn; Tanaka, Kanako; Worrell, Ernst; Yamba, Francis; Fengqi, Zhou; de la Rue du Can, Stephane; Gielen, Dolf; Joosen, Suzanne; Konar, Manaswita; Matysek, Anna; Miner, Reid; Okazaki, Teruo; Sanders, Johan; Sheinbaum Parado, Claudia

    2007-12-01

    This chapter addresses past, ongoing, and short (to 2010) and medium-term (to 2030) future actions that can be taken to mitigate GHG emissions from the manufacturing and process industries. Globally, and in most countries, CO{sub 2} accounts for more than 90% of CO{sub 2}-eq GHG emissions from the industrial sector (Price et al., 2006; US EPA, 2006b). These CO{sub 2} emissions arise from three sources: (1) the use of fossil fuels for energy, either directly by industry for heat and power generation or indirectly in the generation of purchased electricity and steam; (2) non-energy uses of fossil fuels in chemical processing and metal smelting; and (3) non-fossil fuel sources, for example cement and lime manufacture. Industrial processes also emit other GHGs, e.g.: (1) Nitrous oxide (N{sub 2}O) is emitted as a byproduct of adipic acid, nitric acid and caprolactam production; (2) HFC-23 is emitted as a byproduct of HCFC-22 production, a refrigerant, and also used in fluoroplastics manufacture; (3) Perfluorocarbons (PFCs) are emitted as byproducts of aluminium smelting and in semiconductor manufacture; (4) Sulphur hexafluoride (SF{sub 6}) is emitted in the manufacture, use and, decommissioning of gas insulated electrical switchgear, during the production of flat screen panels and semiconductors, from magnesium die casting and other industrial applications; (5) Methane (CH{sub 4}) is emitted as a byproduct of some chemical processes; and (6) CH{sub 4} and N{sub 2}O can be emitted by food industry waste streams. Many GHG emission mitigation options have been developed for the industrial sector. They fall into three categories: operating procedures, sector-wide technologies and process-specific technologies. A sampling of these options is discussed in Sections 7.2-7.4. The short- and medium-term potential for and cost of all classes of options are discussed in Section 7.5, barriers to the application of these options are addressed in Section 7.6 and the implication of

  5. Rapid development in vitro and in vivo of resistance to ceftazidime in biofilm-growing Pseudomonas aeruginosa due to chromosomal beta-lactamase

    DEFF Research Database (Denmark)

    Bagge, N; Ciofu, O; Skovgaard, L T

    2000-01-01

    The aim of this study was to examine the development of resistance of biofilm-growing P. aeruginosa during treatment with ceftazidime. Biofilms were established in vitro using a modified Robbins device (MRD) and in vivo in the rat model of chronic lung infection. Three P. aeruginosa strains...

  6. Health in relation to occupational exposure to pesticides in the Dutch flower bulb culture : Part 3A : neurobehavioral assessment of workers occupationally exposed to pesticides in the bulb growing industry

    NARCIS (Netherlands)

    Emmen, H.H.; Hooisma, J.; Kullig, B.M.; Brouwer, E.J.

    1992-01-01

    The purpose of the present study was to evaluate the possible effects of occupational exposure to pesticides on central nervous system (CNS) function. A variety of neurobehavioral functions were assessed in a group of 129 workers in the bulb growing industry with at least ten years occupational

  7. Energy concentration and phosphorus digestibility in yeast products produced from the ethanol industry, and in brewers' yeast, fish meal, and soybean meal fed to growing pigs.

    Science.gov (United States)

    Kim, B G; Liu, Y; Stein, H H

    2014-12-01

    Two experiments were conducted to determine the DE, ME, and standardized total tract digestibility (STTD) of P in 2 novel sources of yeast (C-yeast and S-yeast) and in brewers' yeast, fish meal, and soybean meal fed to growing pigs. The 2 new sources of yeast are coproducts from the dry-grind ethanol industry. The concentrations of DM, GE, and P were 94.8%, 5,103 kcal/kg, and 1.07% in C-yeast; 94.4%, 4,926 kcal/kg, and 2.01% in S-yeast; 93.6%, 4,524 kcal/kg, and 1.40% in brewers' yeast; 91.4%, 4,461 kcal/kg, and 3.26% in fish meal; and 87.7%, 4,136 kcal/kg, and 0.70% in soybean meal, respectively. The DE and ME in each of the ingredients were determined using 42 growing barrows (28.9±2.18 kg BW). A corn-based basal diet and 5 diets containing corn and 24% to 40% of each test ingredient were formulated. The total collection method was used to collect feces and urine, and the difference procedure was used to calculate values for DE and ME in each ingredient. The concentrations of DE in corn, C-yeast, S-yeast, brewers' yeast, fish meal, and soybean meal were 4,004, 4,344, 4,537, 4,290, 4,544, and 4,362 kcal/kg DM (SEM=57), respectively, and the ME values were 3,879, 3,952, 4,255, 3,771, 4,224, and 4,007 kcal/kg DM (SEM=76), respectively. The ME in S-yeast and fish meal were greater (Pyeast, whereas the ME in C-yeast and soybean meal were not different from those of any of the other ingredients. The STTD of P in the 5 ingredients was determined using 42 barrows (28.3±7.21 kg BW) that were placed in metabolism cages. Five diets were formulated to contain each test ingredient as the sole source of P, and a P-free diet was used to estimate the basal endogenous loss of P. Feces were collected for 5 d using the marker to marker method after a 5-d adaptation period. The STTD of P in brewers' yeast (85.2%) was greater (Pyeast (75.7%). The STTD of P in C-yeast (73.9%) was not different from the STTD of P in S-yeast and fish meal (67.3%) but was greater (Pyeast contain

  8. Rapid screening procedure to optimise the anaerobic codigestion of industrial biowastes and agricultural livestock wastes in Cyprus.

    Science.gov (United States)

    Monou, M; Kythreotou, N; Fatta, D; Smith, S R

    2009-02-01

    Small-scale experimental investigations were undertaken on the anaerobic digestion (AD) and codigestion of livestock waste and industrial biowastes. A simple procedure was developed to rapidly determine the suitability of wastes for digestion. The experiment was split into two phases; initially, the seed (digested brewery waste) was replaced by the test waste over a period of 5 days. During the second phase, the test waste was incubated and monitored for methanogenesis. Dairy cattle slurry was the most efficient co-substrate which, when codigested with pig slurry in an equal ratio achieved volatile solids destruction of 32%, CH(4) production rate of 97.4 ml d(-1), maximum CH(4) content of 61.6% and total gas yield of 2229 ml after 529 h. High fat content wastes were unsuitable for AD due to low pH value and because the dominant microbial reaction was fermentation. Codigestion was investigated to overcome any inhibitions; however, dairy cattle slurry, abattoir wastewater and NaOH additions did not lead to methanogenesis. Treating these wastes by AD is feasible but without CH(4) production.

  9. Management of skeletal Class III malocclusion with unilateral crossbite on a growing patient using facemask-bonded rapid palatal expander and fixed appliances

    Directory of Open Access Journals (Sweden)

    Tinnie Effendy

    2015-01-01

    Full Text Available Facemask (FM and bonded rapid palatal expander (RPE are part of growth modification treatments for correcting skeletal Class III pattern with retrognathic maxilla. This orthopaedic treatment is usually preceded by fixed appliances to achieve aesthetic dental alignment and improve interdigitation. This case report reviews treatment of Class III malocclusion with unilateral crossbite in a 12-year-old boy using FM and bonded RPE, followed by fixed appliances. Choice of FM and bonded RPE was in line with indication which was mild Class III malocclusion with retrognathic maxilla. Execution of treatment was made considering treatment biomechanics and patient cooperation. This orthopaedic treatment was followed by orthodontic treatment specifically aimed to correct unilateral crossbite, canine relationship yet to reach Class I, lower midline shift, as well as unintended dental consequences of using bonded RPE, namely posterior open bite and deepening curve of spee. Posttreatment facial profile and smile are more esthetic. Occlusion is significantly improved both functionally and aesthetically.

  10. Development of an in vitro Assay, Based on the BioFilm Ring Test®, for Rapid Profiling of Biofilm-Growing Bacteria.

    Science.gov (United States)

    Di Domenico, Enea G; Toma, Luigi; Provot, Christian; Ascenzioni, Fiorentina; Sperduti, Isabella; Prignano, Grazia; Gallo, Maria T; Pimpinelli, Fulvia; Bordignon, Valentina; Bernardi, Thierry; Ensoli, Fabrizio

    2016-01-01

    Microbial biofilm represents a major virulence factor associated with chronic and recurrent infections. Pathogenic bacteria embedded in biofilms are highly resistant to environmental and chemical agents, including antibiotics and therefore difficult to eradicate. Thus, reliable tests to assess biofilm formation by bacterial strains as well as the impact of chemicals or antibiotics on biofilm formation represent desirable tools for a most effective therapeutic management and microbiological risk control. Current methods to evaluate biofilm formation are usually time-consuming, costly, and hardly applicable in the clinical setting. The aim of the present study was to develop and assess a simple and reliable in vitro procedure for the characterization of biofilm-producing bacterial strains for future clinical applications based on the BioFilm Ring Test® (BRT) technology. The procedure developed for clinical testing (cBRT) can provide an accurate and timely (5 h) measurement of biofilm formation for the most common pathogenic bacteria seen in clinical practice. The results gathered by the cBRT assay were in agreement with the traditional crystal violet (CV) staining test, according to the κ coefficient test (κ = 0.623). However, the cBRT assay showed higher levels of specificity (92.2%) and accuracy (88.1%) as compared to CV. The results indicate that this procedure offers an easy, rapid and robust assay to test microbial biofilm and a promising tool for clinical microbiology.

  11. Rapid Water Uptake and Limited Storage Capacity at Height of Growing Season in Four Temperate Tree Species in a Central Pennsylvania Catchment

    Science.gov (United States)

    Gaines, K.; Meinzer, F. C.; Duffy, C.; Thomas, E.; Eissenstat, D. M.

    2014-12-01

    rapid water uptake and tree water storage limited to about a month in duration. These findings are necessary for modeling of hydrologic parameters that are influenced by tree water age. They also indicate that trees on shallow soil in this catchment may be at risk if droughts lasting over a month occur more frequently in future years.

  12. The growing importance of staple foods and condiments used as ingredients in the food industry and implications for large-scale food fortification programs in Southeast Asia.

    Science.gov (United States)

    Spohrer, Rebecca; Larson, Melanie; Maurin, Clémence; Laillou, Arnaud; Capanzana, Mario; Garrett, Greg S

    2013-06-01

    Food fortification is a viable strategy to improve the nutritional status of populations. In Southeast Asia, recent growth and consolidation of the food industry provides an opportunity to explore whether certain widely consumed processed foods could contribute to micronutrient status if they are made with adequately fortified staples and condiments. To estimate the potential contribution certain processed foods can make to micronutrient intake in Southeast Asia if they are made with fortified staples and condiments; e.g., via the inclusion of iodized salt in various processed foods in the Philippines, fortified wheat flour in instant noodles in Indonesia, and fortified vegetable oil in biscuits in Vietnam. For Indonesia, the Philippines, and Vietnam, a review of consumption trends, relevant policies, and industry practices was conducted using publicly available sources,food industry market data and research reports, and oral communication. These informed the estimates of the proportion of the Recommended Nutrient Intake (RNI) that could be delivered via select processed foods. In the Philippines, Indonesia, and Vietnam, the processed food industry is not always required to use fortified staples and condiments. In the Philippines, dried salted fish with iodized salt would provide 64% to 85% of the iodine RNI for women of reproductive age and 107% to 141% of the iodine RNI for children 1 to 6 years of age. In Indonesia, a 75-g pack of instant noodles (a highly consumed product) with fortified wheat flour would provide 45% to 51% of the iron RNI for children 4 to 6 years of age and 10% to 11% of the iron RNI for women of reproductive age. In Vietnam, biscuits containing vegetable oil are increasingly popular. One 35-g biscuit serving with fortified vegetable oil would provide 13% to 18% of the vitamin A RNI for children 4 to 6 years of age and 12% to 17% of the vitamin A RNI for women of reproductive age. Ensuring that fortified staples and condiments such as flour

  13. Industrialized Information Systems Development

    DEFF Research Database (Denmark)

    Havn, Erling; Bansler, Jørgen P.

    1996-01-01

    The production of application software is rapidly being industrialized. Computer manufacturers and software houses produce a rapidly growing number of generic software applications and systems, and more and more user companies choose to build their computer-based information systems...... with such generic products, instead of custom made software. We discuss how the move away from traditional in-house development and the increasing use of generic software is likely to transform IS development in the near future. We conclude that these developments will make new demands on the information systems...

  14. Growing Pains

    CERN Multimedia

    Katarina Anthony

    2013-01-01

    Heat expands and cold contracts: it’s a simple thermodynamic rule. But when temperatures swing from 300 K to near-absolute zero, this rule can mean a contraction of more than 80 metres across the LHC’s 27-km-long cryogenic system. Keeping this growth in check are compensators (a.k.a. bellows), which shrink and stretch in response to thermodynamic changes. Leak tests and X-rays now underway in the tunnel have revealed that these “joints” might be suffering from growing pains…   This 25-μm weld crack is thought to be the cause of the helium leaks. Prior to the LS1 warm-up, CERN’s cryogenic experts knew of two points in the machine’s cryogenic distribution system that were leaking helium. Fortunately, these leaks were sufficiently small, confined to known sub-sectors of the cryogenic line and – with help from the vacuum team (TE-VSC) – could easily be compensated for. But as the machine warmed up f...

  15. Three-Dimensional Evaluation of the Upper Airway Morphological Changes in Growing Patients with Skeletal Class III Malocclusion Treated by Protraction Headgear and Rapid Palatal Expansion: A Comparative Research.

    Directory of Open Access Journals (Sweden)

    Xueling Chen

    Full Text Available The aim of this study was to evaluate the morphological changes of upper airway after protraction headgear and rapid maxillary expansion (PE treatment in growing patients with Class III malocclusion and maxillary skeletal deficiency compared with untreated Class III patients by cone-beam computed tomography (CBCT.Thirty growing patients who have completed PE therapy were included in PE group. The control group (n = 30 was selected from the growing untreated patients with the same diagnosis. The CBCT scans of the pre-treatment (T1 and post-treatment (T2 of PE group and the control group were collected. Reconstruction and registration of the 3D models of T1 and T2 were completed. By comparing the data obtained from T1, T2 and control group, the morphological changes of the upper airway during the PE treatment were evaluated.Comparing with the data from T1 group, the subspinale (A of maxilla and the upper incisor (UI of the T2 group were moved in the anterior direction. The gnathion (Gn of mandible was moved in the posterior-inferior direction. The displacement of the hyoid bone as well as the length and width of dental arch showed significant difference. The volume and mean cross-sectional area of nasopharynx, velopharynx and glossopharynx region showed significant difference. The largest anteroposterior/the largest lateral (AP/LR ratios of the velopharynx and glossopharynx were increased, but the AP/LR ratio of the hypopharynx was decreased. In addition, the length and width of the maxillary dental arch, the displacement of the hyoid bone, the volume of nasopharynx and velopharynx, and the AP/LR ratio of the hypopharynx and velopharynx showed significant difference between the data from control and T2 group.The PE treatment of Class III malocclusion with maxillary skeletal hypoplasia leads to a significant increase in the volume of nasopharynx and velopharynx.

  16. Three-Dimensional Evaluation of the Upper Airway Morphological Changes in Growing Patients with Skeletal Class III Malocclusion Treated by Protraction Headgear and Rapid Palatal Expansion: A Comparative Research.

    Science.gov (United States)

    Chen, Xueling; Liu, Dongxu; Liu, Ju; Wu, Zizhong; Xie, Yongtao; Li, Liang; Liu, Hong; Guo, Tiantian; Chen, Chen; Zhang, Shijie

    2015-01-01

    The aim of this study was to evaluate the morphological changes of upper airway after protraction headgear and rapid maxillary expansion (PE) treatment in growing patients with Class III malocclusion and maxillary skeletal deficiency compared with untreated Class III patients by cone-beam computed tomography (CBCT). Thirty growing patients who have completed PE therapy were included in PE group. The control group (n = 30) was selected from the growing untreated patients with the same diagnosis. The CBCT scans of the pre-treatment (T1) and post-treatment (T2) of PE group and the control group were collected. Reconstruction and registration of the 3D models of T1 and T2 were completed. By comparing the data obtained from T1, T2 and control group, the morphological changes of the upper airway during the PE treatment were evaluated. Comparing with the data from T1 group, the subspinale (A) of maxilla and the upper incisor (UI) of the T2 group were moved in the anterior direction. The gnathion (Gn) of mandible was moved in the posterior-inferior direction. The displacement of the hyoid bone as well as the length and width of dental arch showed significant difference. The volume and mean cross-sectional area of nasopharynx, velopharynx and glossopharynx region showed significant difference. The largest anteroposterior/the largest lateral (AP/LR) ratios of the velopharynx and glossopharynx were increased, but the AP/LR ratio of the hypopharynx was decreased. In addition, the length and width of the maxillary dental arch, the displacement of the hyoid bone, the volume of nasopharynx and velopharynx, and the AP/LR ratio of the hypopharynx and velopharynx showed significant difference between the data from control and T2 group. The PE treatment of Class III malocclusion with maxillary skeletal hypoplasia leads to a significant increase in the volume of nasopharynx and velopharynx.

  17. Iowa Lakes Community College: Partnerships for Academic and Economic Success in a Rapidly Evolving Wind-Energy Industry

    Science.gov (United States)

    Mohni, Mary; Rogers, Jolene; Zeitz, Al

    2007-01-01

    Iowa Lakes Community College responded to a national need for wind-energy technicians. The Wind-Energy and Turbine Program aligned industry and academic competencies with experiential learning components to foster exploration of additional renewable energy applications. Completers understand both the physical and academic rigor a career in wind…

  18. Rapid Industrial Development, Competition, and Relative Economic Status: A Study in Human Ecology. Working Paper RID 73.10.

    Science.gov (United States)

    Summers, Gene F.; Clemente, Frank

    The document has 3 goals (1) to examine the distribution of economic benefits of industrial development as reflected by the concept of competition in human ecology; (2) to provide an empirical test of the ecological model, and (3) to relate the findings to public policy. Two Illinois study areas were identified. First, as an experimental region,…

  19. Development and characterization of a novel immobilized microbial membrane for rapid determination of biochemical oxygen demand load in industrial waste-waters.

    Science.gov (United States)

    Rastogi, Shikha; Kumar, Anil; Mehra, N K; Makhijani, S D; Manoharan, A; Gangal, V; Kumar, Rita

    2003-01-01

    The rapid determination of waste-water quality of waste-water treatment plants in terms of pollutional strength, i.e. biochemical oxygen demand (BOD) is difficult or even impossible using the chemical determination method. The present study reports the determination of BOD within minutes using microbial BOD sensors, as compared to the 5-day determination using the conventional method. Multiple criteria establish the basis for the development of a BOD biosensor useful for rapid and reliable BOD estimation in industrial waste-waters. Of these, preparation of a suitable novel immobilized microbial membrane used in conjunction with an apt transducer is discussed. As a result, a microbial biosensor based on a formulated, synergistic, pre-tested microbial consortium has been developed for the measurement of BOD load of various industrial waste-waters. The sensor showed maximum response in terms of current difference, when a cell concentration of 2.25 x 10(10) CFU, harvested in their log phase of growth were utilized for microbial membrane construction. The sensor showed a stability of 180 days when the prepared membranes were stored at a temperature of 4 degrees C in 50 mM phosphate buffer of pH 6.8. The reusability of the immobilized membranes was up to 200 cycles without appreciable loss of their response characteristics. A linear relationship between the current change and a glucose-glutamic acid (GAA) concentration up to 60 mg l(-1) was observed (r=0.999). The lower detection limit was 1.0 mg l(-1) BOD. The sensor response was reproducible within +/-5% of the mean in a series of ten samples having 44 mg l(-1) BOD using standard a GGA solution. When used for the BOD estimation of industrial waste-waters, a relatively good agreement was found between the two methods, i.e. 5-day BOD and that measured by the developed microbial sensor.

  20. Application of electrical capacitance tomography and artificial neural networks to rapid estimation of cylindrical shape parameters of industrial flow structure

    Directory of Open Access Journals (Sweden)

    Garbaa Hela

    2016-12-01

    Full Text Available A new approach to solve the inverse problem in electrical capacitance tomography is presented. The proposed method is based on an artificial neural network to estimate three different parameters of a circular object present inside a pipeline, i.e. radius and 2D position coordinates. This information allows the estimation of the distribution of material inside a pipe and determination of the characteristic parameters of a range of flows, which are characterised by a circular objects emerging within a cross section such as funnel flow in a silo gravitational discharging process. The main advantages of the proposed approach are explicitly: the desired characteristic flow parameters are estimated directly from the measured capacitances and rapidity, which in turn is crucial for online flow monitoring. In a classic approach in order to obtain these parameters in the first step the image is reconstructed and then the parameters are estimated with the use of image processing methods. The obtained results showed significant reduction of computations time in comparison to the iterative LBP or Levenberg-Marquard algorithms.

  1. Past, present and future of the telecommunications industry

    OpenAIRE

    Pennings, J.S.J.; Kranenburg, H.L. van; Hagedoorn, J.

    2005-01-01

    The telecommunications industry has experienced a series of dramatic changes since itsinception in the 1880s. Due to the latest liberalization and privatization wave in the world, the telecommunications industry has turned into a dynamic environment and is rapidly growing.In addition, the New Economy emerged and brought new technological developments in the1990s. They have stimulated the convergence of previously distinct industries such as thetelecommunications, information technology, enter...

  2. Identification of different subtypes of rapid growing Atypical Mycobacterium from water and soil sources: Using PCR-RFLP using hsp65 and rRNA 16s-23s genes.

    Science.gov (United States)

    Varahram, Mohammad; Farnia, Parissa; Saif, Shima; Marashian, Mehran; Farnia, Poopak; Ghanavi, Jaladein; Velayati, Ali Akbar

    2016-12-01

    Nontuberculosis mycobacteria (NTM) are a diverse group of microorganisms that cause a variety of diseases in humans including skin, respiratory, and gastrointestinal tract infection. Generally, NTM are classified into two categories: rapid (7days). In this study, we aimed to investigate NTM frequency and prevalence in environmental samples. Additionally, we tried to identify various subtypes of isolated rapid growing mycobacteria (RGM). Through a prospective descriptive cross-sectional study, water and soil samples were gathered from four neighboring towns around Tehran, the capital of Iran, at different geographic directions. Every 100m(2) of the studied areas gave one sample containing 6g of soil in 3-5cm depth deposited in 50mL sterile water as sampling media. After digestion and decontamination, DNA from culture-positive specimens (RGM) were extracted using phenol-chloroform methods. Then the molecular identification of species and subspecies were performed using 16s-23s rRNA and hsp65 gene. In total, 341 RGM were found, out of which 322 (94.4%) were identified and 20 (5.8%) could not be identified. The most frequent RGM was, Mycobacterium fortuitum (72; 22%), Mycobacterium senegalense (58; 17.7%), Mycobacterium parafortuitum (44; 13.4%) and Mycobacterium conceptionense type 1 (24; 7.2%), and Mycobacterium cheloni type 1 (20; 6.0%). As shown in Table 1, M. fortuitum had more subtypes (8), and the frequency of subtypes 1 (27.7%), 4 (16.6%), and 5 (13.8%) were higher. Among subtypes of M. senegalense, subtype 1 had a higher frequency (70.4%) in comparison to subtype 2 (29.5%). M. cheloni had just one subtype. Our results showed M. fortuitum as the most prominent strain isolated from environmental samples. The frequency was similar in different places, irrespective of climatic variations. Availability of various subtypes of M. fortuitum might indicate a large circulation of this RGM in soil and water of Iranian territory. This high prevalence of M. fortuitum might

  3. Mycobacterium lutetiense sp. nov., Mycobacterium montmartrense sp. nov. and Mycobacterium arcueilense sp. nov., members of a novel group of non-pigmented rapidly growing mycobacteria recovered from a water distribution system.

    Science.gov (United States)

    Konjek, Julie; Souded, Sabiha; Guerardel, Yann; Trivelli, Xavier; Bernut, Audrey; Kremer, Laurent; Welte, Benedicte; Joyeux, Michel; Dubrou, Sylvie; Euzeby, Jean-Paul; Gaillard, Jean-Louis; Sapriel, Guillaume; Heym, Beate

    2016-09-01

    From our recent survey of non-pigmented rapidly growing mycobacteria in the Parisian water system, three groups of isolates (taxons 1-3) corresponding to possible novel species were selected for taxonomic study. The three taxa each formed creamy white, rough colonies, had an optimal growth temperature of 30 °C, hydrolyzed Tween 80, were catalase-positive at 22 °C and expressed arylsulfatase activity. All three were susceptible to amikacin, ciprofloxacin and tigecycline. The three taxa produced specific sets of mycolic acids, including one family that has never previously been described, as determined by thin layer chromatography and nuclear magnetic resonance. The partial rpoB sequences (723 bp) showed 4-6 % divergence from each other and more than 5 % differences from the most similar species. Partial 16S rRNA gene sequences showed 99 % identity within each species. The most similar sequences for 16S rRNA genes (98-99 % identity over 1444-1461 bp) were found in the Mycobacterium fortuitum group, Mycobacterium septicum and Mycobacterium farcinogenes. The three taxa formed a new clade (bootstrap value, 99 %) on trees reconstructed from concatenated partial 16S rRNA, hsp65 and rpoB sequences. The above results led us to propose three novel species for the three groups of isolates, namely Mycobacterium lutetiense sp. nov. [type strain 071T=ParisRGMnew_1T (CIP 110656T=DSM 46713T)], Mycobacterium montmartrense sp. nov. [type strain 196T=ParisRGMnew_2T (CIP 110655T=DSM 46714T)] and Mycobacteriu marcueilense sp. nov. [type strain of 269T=ParisRGMnew_3T (CIP 110654T=DSM 46715T)].

  4. A Real Time Quality Monitoring System for the Lighting Industry: A Practical and Rapid Approach Using Computer Vision and Image Processing (CVIP Tools

    Directory of Open Access Journals (Sweden)

    C.K. Ng

    2011-11-01

    Full Text Available In China, the manufacturing of lighting products is very labour intensive. The approach used to check quality and control production relies on operators who test using various types of fixtures. In order to increase the competitiveness of the manufacturer and the efficiency of production, the authors propose an integrated system. This system has two major elements: a computer vision system (CVS and a real‐time monitoring system (RTMS. This model focuses not only on the rapid and practical application of modern technology to a traditional industry, but also represents a process innovation in the lighting industry. This paper describes the design and development of the prototyped lighting inspection system based on a practical and fast approach using computer vision and imaging processing (CVIP tools. LabVIEW with IMAQ Vision Builder is the chosen tool for building the CVS. Experimental results show that this system produces a lower error rate than humans produce in the quality checking process. The whole integrated manufacturing strategy, aimed at achieving a better performance, is most suitable for a China and other labour intensive environments such as India.

  5. Establishment of a simple and rapid identification method for Listeria spp. by using high-resolution melting analysis, and its application in food industry.

    Science.gov (United States)

    Ohshima, Chihiro; Takahashi, Hajime; Phraephaisarn, Chirapiphat; Vesaratchavest, Mongkol; Keeratipibul, Suwimon; Kuda, Takashi; Kimura, Bon

    2014-01-01

    Listeria monocytogenes is the causative bacteria of listeriosis, which has a higher mortality rate than that of other causes of food poisoning. Listeria spp., of which L. monocytogenes is a member, have been isolated from food and manufacturing environments. Several methods have been published for identifying Listeria spp.; however, many of the methods cannot identify newly categorized Listeria spp. Additionally, they are often not suitable for the food industry, owing to their complexity, cost, or time consumption. Recently, high-resolution melting analysis (HRMA), which exploits DNA-sequence differences, has received attention as a simple and quick genomic typing method. In the present study, a new method for the simple, rapid, and low-cost identification of Listeria spp. has been presented using the genes rarA and ldh as targets for HRMA. DNA sequences of 9 Listeria species were first compared, and polymorphisms were identified for each species for primer design. Species specificity of each HRM curve pattern was estimated using type strains of all the species. Among the 9 species, 7 were identified by HRMA using rarA gene, including 3 new species. The remaining 2 species were identified by HRMA of ldh gene. The newly developed HRMA method was then used to assess Listeria isolates from the food industry, and the method efficiency was compared to that of identification by 16S rDNA sequence analysis. The 2 methods were in coherence for 92.6% of the samples, demonstrating the high accuracy of HRMA. The time required for identifying Listeria spp. was substantially low, and the process was considerably simplified, providing a useful and precise method for processing multiple samples per day. Our newly developed method for identifying Listeria spp. is highly valuable; its use is not limited to the food industry, and it can be used for the isolates from the natural environment.

  6. Beyond the 'post-industrial' city: valuing and planning for industry in London

    OpenAIRE

    Ferm, J. A.; Jones, E.M.

    2016-01-01

    This paper examines the challenges that planners face if industry is to survive and thrive in a growing ‘post-industrial’ city. It examines London, where the difference between the value of land for residential and industrial use, and the pressure to address the housing crisis, is leading to the rapid loss of industrial land and premises. The paper first explores the role of industry in a high-value city such as London, arguing that trends in manufacturing in advanced economies are increasing...

  7. Growing and Growing: Promoting Functional Thinking with Geometric Growing Patterns

    Science.gov (United States)

    Markworth, Kimberly A.

    2010-01-01

    Design research methodology is used in this study to develop an empirically-substantiated instruction theory about students' development of functional thinking in the context of geometric growing patterns. The two research questions are: (1) How does students' functional thinking develop in the context of geometric growing patterns? (2) What are…

  8. INTERNET COMMERCE IN MARITIME INDUSTRY

    Directory of Open Access Journals (Sweden)

    Monika Szyda

    2014-06-01

    Full Text Available Internet commerce in Poland is growing rapidly, entering into new industries and of-fering a wider and wider range of goods and services. For electronic commerce is open maritime industry, as evidenced by the maritime e-commerce. This aspect of e-commerce is not a popular topic of publications and research. In this article the author presents the genesis of electronic commerce in the maritime industry taking into account the particular business relationship business-to-business (B2B. Then attempt to characterize maritime e-commerce in business-to-customer (B2C relationship. The purpose of this article is to identify the attributes of internet commerce in the maritime industry, having particular re-gard to Polish online market, especially retail.

  9. Rapid analysis of effluents generated by the dairy industry for fat determination by preconcentration in nylon membranes and attenuated total reflectance infrared spectroscopy measurement.

    Science.gov (United States)

    Moliner Martínez, Y; Muñoz-Ortuño, M; Herráez-Hernández, R; Campíns-Falcó, P

    2014-02-01

    This paper describes a new approach for the determination of fat in the effluents generated by the dairy industry which is based on the retention of fat in nylon membranes and measurement of the absorbances on the membrane surface by ATR-IR spectroscopy. Different options have been evaluated for retaining fat in the membranes using milk samples of different origin and fat content. Based on the results obtained, a method is proposed for the determination of fat in effluents which involves the filtration of 1 mL of the samples through 0.45 µm nylon membranes of 13 mm diameter. The fat content is then determined by measuring the absorbance of band at 1745 cm(-1). The proposed method can be used for the direct estimation of fat at concentrations in the 2-12 mg/L interval with adequate reproducibility. The intraday precision, expressed as coefficients of variation CVs, were ≤ 11%, whereas the interday CVs were ≤ 20%. The method shows a good tolerance towards conditions typically found in the effluents generated by the dairy industry. The most relevant features of the proposed method are simplicity and speed as the samples can be characterized in a few minutes. Sample preparation does not involve either additional instrumentation (such as pumps or vacuum equipment) or organic solvents or other chemicals. Therefore, the proposed method can be considered a rapid, simple and cost-effective alternative to gravimetric methods for controlling fat content in these effluents during production or cleaning processes. © 2013 Published by Elsevier B.V.

  10. Water requirements of selected industries

    Science.gov (United States)

    ,; Mussey, Orville D.; Conklin, Howard L.; Durfor, Charles N.; Otts, Louis Ethelbert; Walling, Faulkner B.

    1955-01-01

    The early industries in America generally were established when and where demands for the products of industry arose. Most of the early industries were so located that their increasing requirements for transportation, raw materials, market, labor, and water supply could be satisfied economically. Many of these original plant locations have continued as modern industrial centers and their output has increased manyfold in meeting the demands of our growing Nation. The recent and current industrial expansion and the trend toward the growth of chemical industries, many Of which are heavy users of water, has resulted in a tremendous increase in the total withdrawal of water for industrial use as well as a large increase in the per capita use of water. This increase in industrial water requirement has strained the capacity of the developed water supplies in many areas, and in some instances the adequacy of the potential water supplies is questionable. The Geological Survey is engaged in preparing and publishing a series of reports describing the developed and undeveloped water resources of many important industrial areas. This work was started initially at the request of the National Securities Resources Board as a means to insure that water supplies are adequate for our rapidly expanding industrial development. Although many factors contribute to establishing the feasibility or even the limits of future industrial development, the one relating to available water supply is extremely important. A knowledge of the water requirements of various industries is valuable therefore in planning the logical development in any area where water supply is a critical factor. Thus far very little suitable information on the water requirements of our major industries is available for general planning. An inventory of unit water-use values in industry therefore would be generally helpful and also might tend to stimulate water-conservation methods. To obtain such information

  11. Turkish confection industry in Amsterdam: the rise and fall of a perfectly competitive labour market

    NARCIS (Netherlands)

    Hartog, J.; Zorlu, A.

    1998-01-01

    While the Dutch textile industry declined rapidly, Turkish entrepreneurs created a growing industry for fashion goods with highly flexible demand in an informal sector that was initially tolerated by the autorities and attracted many undocumented immigrants. It led to the unusual spectacle of a

  12. Comparison of the Rapid Entire Body Assessment and the New Zealand Manual Handling 'Hazard Control Record', for assessment of manual handling hazards in the supermarket industry.

    Science.gov (United States)

    Coyle, Alison

    2005-01-01

    This is a case study comparing the use of two different assessment tools (Rapid Entire Body Assessment versus New Zealand Manual Handling Hazard Control Record) to assess, plan and implement changes in manual handling practices in the supermarket industry. Existing manual handling practices being used within these supermarkets were assessed using each of these tools. The most hazardous tasks were revised to improve work methods and reviewed again using both tools, to determine the usefulness and effectiveness of these tools. The process generated considerable discussion regarding the benefits and drawbacks of each tool. The usefulness of each tool appears dependant on the reason for assessment and the anticipated outcome. REBA may be more useful if specific ergonomic or biomechanical changes are being implemented to decrease risk of work-related injury (particularly if an objective numeric score is required for re-assessment following modifications, to determine their effectiveness). The New Zealand Code of Practice for Manual Handling 'Hazard Control Record' Risk Score analysis process lacks specificity and objectivity, however it is less reductionistic and takes into account many factors other than biomechanics and ergonomics. It directs the user toward implementing controls, which are thorough, multi-factorial and useful to control hazards relating to several other areas, including task, load, environment, people and management factors.

  13. Rapid methodology via mass spectrometry to quantify addition of soybean oil in extra virgin olive oil: A comparison with traditional methods adopted by food industry to identify fraud.

    Science.gov (United States)

    da Silveira, Roberta; Vágula, Julianna Matias; de Lima Figueiredo, Ingrid; Claus, Thiago; Galuch, Marilia Bellanda; Santos Junior, Oscar Oliveira; Visentainer, Jesui Vergilio

    2017-12-01

    Fast and innovative methodology to monitors the addition of soybean oil in extra virgin olive oil was developed employing ESI-MS with ionization operating in positive mode. A certified extra virgin olive oil and refined soybean oil samples were analyzed by direct infusion, the identification of a natural lipid marker present only in soybean oil (m/z 886.68 [TAG+NH4]+) was possible. The certified extra virgin olive oil was purposely adulterated with soybean oil in different levels (1, 5, 10, 20, 50, 70, 90%) being possible to observe that the new methodology is able to detect even small fraud concentration, such as 1% (v/v). Additionally, commercial samples were analyzed and were observed the addition of soybean oil as a common fraud in this segment. This powerful analytical method proposed could be applied as routine analysis by control organization, as well as food industries, considering its pronounced advantages; simplicity, rapidity, elevated detectability and minor amounts of sample and solvent consumed. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Growing media [Chapter 5

    Science.gov (United States)

    Douglass F. Jacobs; Thomas D. Landis; Tara Luna

    2009-01-01

    Selecting the proper growing medium is one of the most important considerations in nursery plant production. A growing medium can be defined as a substance through which roots grow and extract water and nutrients. In native plant nurseries, a growing medium can consist of native soil but is more commonly an "artificial soil" composed of materials such as peat...

  15. An Ambition to Grow

    OpenAIRE

    Ron Kemp; Hakkert, R.

    2006-01-01

    This report tries to gain insight in the willingness or ambition to grow of a small business owner. The main question of this report is therefore: Which factors influence the ambition to grow a business? To examine the ambition to grow an economic and a psychological perspective is given in this study.

  16. Development of a rapid multi-line detector for industrial computed tomography; Entwicklung eines schnellen Mehrzeilen-Detektors fuer die industrielle Computertomographie

    Energy Technology Data Exchange (ETDEWEB)

    Nachtrab, Frank; Firsching, Markus; Hofmann, Thomas; Uhlmann, Norman [Fraunhofer Entwicklungszentrum Roentgentechnik EZRT, Fuerth (Germany); Neubauer, Harald; Nowak, Arne [Fraunhofer Institut fuer Integrierte Schaltungen IIS, Erlangen (Germany)

    2015-07-01

    In this paper we present the development of a rapid multi-row detector is optimized for industrial computed tomography. With a high frame rate, high spatial resolution and the ability to use up to 450 kVp it is particularly suitable for applications such as fast acquisition of large objects, inline CT or time-resolved 4D CT. (Contains PowerPoint slides). [German] In diesem Beitrag praesentieren wir die Entwicklung eines schnellen Mehrzeilendetektors der fuer die industrielle Computertomographie optimiert ist. Mit einer hohen Bildrate, hoher Ortsaufloesung und der Einsatzfaehigkeit bis 450 kVp ist er besonders geeignet fuer Anwendungen wie die schnelle Aufnahme grosser Objekte, Inline-CT oder zeitaufgeloeste ''4D-CT''. In der industriellen Roentgenbildgebung sind Flachbilddetektoren (''flat panel'') und Einzeilendetektoren Stand der Technik. Flat Panel sind bis zu einer Groesse von 40 x 40 cm{sup 2} erhaeltlich und haben den Vorteil, dass sich mit ihnen vielfaltige Objekte vollstaendig abbilden lassen und so kurze Messzeiten moeglich sind. Nachteile dieser Detektoren sind u.a. die Empfindlichkeit gegenueber Streustrahlung und das begrenzte Messfeld. Kommerziell erhaeltliche Zeilendetektoren sind in Laengen bis mehreren Metern erhaeltlich und besitzen allesamt nur eine aktive Zeile. Auf Grund der starken Kollimierung der Roentgenstrahlung auf das schmale Detektorfenster ist der Einfluss von Streustrahlung geringer und die Bildqualitaet gegenueber Flat Panels hoeher. Da jedoch nur eine einzige aktive Zeile vorhanden ist, muss zur Erzeugung eines 2D-Bildes das Objekt abgerastert werden. Da fuer eine Computertomographie eines kompletten Objekts hunderte bis tausende 2D-Bilder notwendig sind, dauert eine CT mit einem Zeilendetektor wesentlich laenger und wird deshalb trotz besserer Bildqualitaet nur in Ausnahmefaellen angewendet. Ein Mehrzeilendetektor stellt einen sehr guten Kompromiss zwischen Bildqualitaet und

  17. Growing America's Energy Future

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-06-01

    The emerging U.S. bioenergy industry provides a secure and growing supply of transportation fuels, biopower, and bioproducts produced from a range of abundant, renewable biomass resources. Bioenergy can help ensure a secure, sustainable, and economically sound future by reducing U.S. dependence on foreign oil, developing domestic clean energy sources, and generating domestic green jobs. Bioenergy can also help address growing concerns about climate change by reducing greenhouse gas emissions to create a healthier environment for current and future generations.

  18. Melting ice, growing trade?

    National Research Council Canada - National Science Library

    Sami Bensassi; Julienne C. Stroeve; Inmaculada Martínez-Zarzoso; Andrew P. Barrett

    2016-01-01

    Abstract Large reductions in Arctic sea ice, most notably in summer, coupled with growing interest in Arctic shipping and resource exploitation have renewed interest in the economic potential of the Northern Sea Route (NSR...

  19. Commentary: Forces That Drive the Vape Shop Industry and Implications for the Health Professions.

    Science.gov (United States)

    Sussman, Steve; Baezconde-Garbanati, Lourdes; Garcia, Robert; Barker, Dianne C; Samet, Jonathan M; Leventhal, Adam; Unger, Jennifer B

    2016-09-01

    At least three factors may be driving the evolution of the vape shop industry, a rapidly growing market sector that specializes in the sales of electronic cigarettes: (1) the tobacco industry, (2) the public health sector and its diverse stakeholders, and (3) consumer demand. These influences and the responses of the vape shop sector have resulted in a rapidly changing landscape. This commentary briefly discusses these three factors and the implications for the health professions, as they address the vape shop industry and its consequences for public health. © The Author(s) 2015.

  20. Problems of rapid growth.

    Science.gov (United States)

    Kim, T D

    1980-01-01

    South Korea's export-oriented development strategy has achieved a remarkable growth record, but it has also brought 2 different problems: 1) since the country's exports accounted for about 1% of total world export volume, the 1st world has become fearful about Korea's aggressive export drive; and 2) the fact that exports account for over 30% of its total gross national product (GNP) exposes the vulnerability of South Korea's economy itself. South Korea continues to be a poor nation, although it is rated as 1 of the most rapidly growing middle income economies. A World Bank 1978 report shows Korea to be 28th of 58 middle income countries in terms of per capita GNP in 1976. Of 11 newly industrializing countries (NIC), 5 in the European continent are more advanced than the others. A recent emphasis on the basic human needs approach has tended to downgrade the concept of GNP. Korea has only an abundant labor force and is without any natural resources. Consequently, Korea utilized an export-oriented development strategy. Oil requirements are met with imports, and almost all raw materials to be processed into exportable products must be imported. To pay import bills Korea must export and earn foreign exchange. It must be emphasized that foreign trade must always be 2-way traffic. In order to export more to middle income countries like Korea, the countries of the 1st world need to ease their protectionist measures against imports from developing countries.

  1. Rapid non-invasive quality control of semi-finished products for the food industry by direct injection mass spectrometry headspace analysis: the case of milk powder, whey powder and anhydrous milk fat.

    Science.gov (United States)

    Makhoul, Salim; Yener, Sine; Khomenko, Iuliia; Capozzi, Vittorio; Cappellin, Luca; Aprea, Eugenio; Scampicchio, Matteo; Gasperi, Flavia; Biasioli, Franco

    2016-09-01

    In this study, we demonstrated the suitability of direct injection mass spectrometry headspace analysis for rapid non-invasive quality control of semi-finished dairy ingredients, such as skim milk powder (SMP), whole milk powder (WMP), whey powder (WP) and anhydrous milk fat (AMF), which are widely used as ingredients in the food industry. In this work, for the first time, we applied proton transfer reaction-mass spectrometry (PTR-MS) with a time-of-flight (ToF) analyzer for the rapid and non-invasive analysis of volatile compounds in different samples of SMP, WMP, WP and AMF. We selected different dairy ingredients in various concrete situations (e.g. same producer and different expiration times, different producers and same days of storage, different producers) based on their sensory evaluation. PTR-ToF-MS allowed the separation and characterization of different samples based on the volatile organic compound (VOC) profiles. Statistically significant differences in VOC content were generally coherent with differences in sensory evaluation, particularly for SMP, WMP and WP. The good separation of SMP samples from WMP samples suggested the possible application of PTR-ToF-MS to detect possible cases of adulteration of dairy ingredients for the food industry. Our findings demonstrate the efficient and rapid differentiation of dairy ingredients on the basis of the released VOCs via PTR-ToF-MS analysis and suggest this method as a versatile tool (1) for the facilitation/optimization of the selection of dairy ingredients in the food industry and (2) and for the prompt innovation in the production of dairy ingredients. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  2. 16S rRNA in situ Hybridization Followed by Flow Cytometry for Rapid Identification of Acetic Acid Bacteria Involved in Submerged Industrial Vinegar Production

    Directory of Open Access Journals (Sweden)

    Luka Lipoglavšek

    2016-01-01

    Full Text Available Acetic acid bacteria are involved in many biotechnological processes such as vitamin C, gluconic acid, miglitol or acetic acid production, and others. For a technologist trying to control the industrial process, the ability to follow the microbiological development of the process is thus of importance. During the past few years hybridization in a combination with flow cytometry has often been used for this purpose. Since vinegar is a liquid, it is an ideal matrix for flow cytometry analysis. In this work we have constructed a specific probe for highly acetic acid-resistant species of the acetic acid bacteria and a protocol for in situ hybridization, which in combination with flow cytometry enables direct monitoring of bacteria producing vinegar with >10 % of acetic acid. The approach was successfully applied for monitoring microbiota during industrial vinegar production.

  3. Co-innovation in networks of resources - A case study in the Chinese exhibition industry

    DEFF Research Database (Denmark)

    Dawson, Bonnie K.; Young, Louise; Tu, Chenglin

    2014-01-01

    effective co-innovation by partners which enabled the exploitation of opportunities in an industry characterized by rapid growth and continuing structural change. Partner co-innovation enabled evolving strategic and operational capabilities which has led to continued and growing market success. This co...

  4. Combinatorial Life Cycle Assessment to Inform Process Design of Industrial Production of Algal Biodiesel

    NARCIS (Netherlands)

    Brentner, L.B.; Eckelman, M.J.; Zimmerman, J.B.

    2011-01-01

    The use of algae as a feedstock for biodiesel production is a rapidly growing industry, in the United States and globally. A life cycle assessment (LCA) is presented that compares various methods, either proposed or under development, for algal biodiesel to inform the most promising pathways for

  5. Analysis of the global production location dynamics in the industrial wood pellet market : an MCDA approach

    NARCIS (Netherlands)

    Smith, T. Pieter; Junginger, H. Martin

    2011-01-01

    Industrial wood pellet demand and international trade have been growing rapidly, requiring producers to build new production facilities. The purpose of this paper is to illustrate the trade-offs of different wood pellet production locations across the world within the next ten years and to improve

  6. The Fourth Industrial Revolution (Industry 4.0: A Social Innovation Perspective

    Directory of Open Access Journals (Sweden)

    Rabeh Morrar

    2017-11-01

    Full Text Available The rapid pace of technological developments played a key role in the previous industrial revolutions. However, the fourth industrial revolution (Industry 4.0 and its embedded technology diffusion progress is expected to grow exponentially in terms of technical change and socioeconomic impact. Therefore, coping with such transformation require a holistic approach that encompasses innovative and sustainable system solutions and not just technological ones. In this article, we propose a framework that can facilitate the interaction between technological and social innovation to continuously come up with proactive, and hence timely, sustainable strategies. These strategies can leverage economic rewards, enrich society at large, and protect the environment. The new forthcoming opportunities that will be generated through the next industrial wave are gigantic at all levels. However, the readiness for such revolutionary conversion require coupling the forces of technological innovation and social innovation under the sustainability umbrella.

  7. [Studies on the alkaloids of Senecio scandens growing in Guangdong].

    Science.gov (United States)

    Guo, Xiao-Fang; Liu, Meng-Hua; Peng, Wei; Wang, Yong-Gang; Yang, Cui-Ping; Su, Wei-Wei

    2011-05-01

    To study alkaloids of Senecio scandens growing in Guangdong. The rapid resolution liquid chromatography-electrospray ionization mass spectrometry (RRLC-ESI-MS/MS) was used to analyse alkaloids of Senecio scandens growing in Guangdong, and senkirkine was isolated and purified by silica gel column chromatography. Four alkaloids were identified as senkirkine, dehydrosenkirkine, monocrotaline and adonifoline, and senkirkine was firstly isolated from Senecio scandens growing in Guangdong. Senkirkine is the main component of Senecio scandens growing in Guangdong.

  8. Growing Plants and Minds

    Science.gov (United States)

    Presser, Ashley Lewis; Kamdar, Danae; Vidiksis, Regan; Goldstein, Marion; Dominguez, Ximena; Orr, Jillian

    2017-01-01

    Many preschool classrooms explore plant growth. However, because many plants take a long time to grow, it is often hard to facilitate engagement in some practices (i.e., since change is typically not observable from one day to another, children often forget their prior predictions or cannot recall what plants looked like days or weeks earlier).…

  9. Growing Up with "1984."

    Science.gov (United States)

    Franza, August

    1983-01-01

    Relates changing student reaction to George Orwell's "1984" over 20 years of teaching. Finds present high school students' acceptance of Orwell's bleak world vision both a sign of student honesty and a frightening indication of the growing reality of the book. (MM)

  10. Growing through Literature.

    Science.gov (United States)

    Thomas, Barbara J.

    "Growing through Literature" is a curriculum using Joan M. and Erik H. Erikson's theory of the Life Cycle as a structure for selecting and teaching literature to inner-city high school students at Brighton High School in Massachusetts. The program consists of four component parts: Journals, Selected Stories, Discussion, and…

  11. Growing Old in Exile

    DEFF Research Database (Denmark)

    Liversage, Anika; Mirdal, Gretty Mizrahi

    2017-01-01

    Some studies on immigrants and ageing focus on the question of return; others focus on how immigrants, who grow old in their countries of destination, ‘age in place’, including whether they turn to their children or to public host country provisions for care and support. However, the issues of re...

  12. 2001 Industry Studies: Space

    National Research Council Canada - National Science Library

    Argodale, John

    2001-01-01

    The U.S. space industry faces significant challenges in the 21st century. Although the U.S. dominates space in terms of investment and capabilities, commercial competition from Europe is formidable and growing...

  13. Private Equity and Industry Performance

    DEFF Research Database (Denmark)

    Bernstein, Shai; Lerner, Josh; Sørensen, Morten

    2017-01-01

    The growth of the private equity industry has spurred concerns about its impact on the economy. This analysis looks across nations and industries to assess the impact of private equity on industry performance. We find that industries where private equity funds invest grow more quickly in terms...

  14. Private Equity and Industry Performance

    DEFF Research Database (Denmark)

    Bernstein, Shai; Lerner, Josh; Sørensen, Morten

    2017-01-01

    The growth of the private equity industry has spurred concerns about its impact on the economy. This analysis looks across nations and industries to assess the impact of private equity on industry performance. We find that industries where private equity funds invest grow more quickly in terms of...

  15. The Novel of Six axes Robotic Arm for Industrial Applications

    Directory of Open Access Journals (Sweden)

    Rajendra R Aparnathi

    2014-05-01

    Full Text Available Automation technology is widely accepted and rapidly growing technology in the field of core and many other industries. Anyone can observe that due to these problems many industries are turning towards automaton. When searching for problem of labor manpower in middle-case industries, we came to know about many other things like production, speed of manufacturing and quality of the product are necessary in the current scenario. These parameters are not being well maintained in incorporate industries with manual manufacturing processes instead of using automatic system. Our objective is to solve these problems by efficient use of different technologies for making an industry fully or partially automated. By using technologies we can try to solve or reduce the effects of above problems.

  16. Geothermal Grows Up

    Science.gov (United States)

    Johnson, William C.; Kraemer, Steven; Ormond, Paul

    2011-01-01

    Self-declared energy and carbon reduction goals on the part of progressive colleges and universities have driven ground source geothermal space heating and cooling systems into rapid evolution, as part of long-term climate action planning efforts. The period of single-building or single-well solutions is quickly being eclipsed by highly engineered…

  17. The vulnerable, rapidly growing thoracic spine of the adolescent

    African Journals Online (AJOL)

    at fault, refusing to allow a 'trivial complaint' to stand in the way of the success of the team in which their sons play a key role. Department of Orthopaedics, University .... hence the diagnosis of 'postural, non-structural, thoracic kyphosis'. In a small percentage of these cases, structural changes have been seen later, but with ...

  18. The vulnerable, rapidly growing thoracic spine of the adolescent ...

    African Journals Online (AJOL)

    Prolapse of disc tissue occurs into the verfebral body, causing a disturbance of growth but little if any pain. The vertebrae in the mid-thoracic region become wedge-shaped, and a kyphotic deformity results, the so-called Scheuermann's disease, or adolescent kyphosis. A plea is made for the screening of children exposed to ...

  19. Effects of photodynamic therapy on rapidly growing nontuberculous mycobacteria keratitis.

    Science.gov (United States)

    Shih, Min-Hsiu; Huang, Fu-Chin

    2011-01-05

    The authors investigated the antimicrobial effect of methylene blue (MB)-mediated photodynamic therapy (PDT) on Mycobacterium fortuitum keratitis. In the in vitro study, the mycobacterial suspension and colonies were treated with the following: no MB, no light (normal control); MB and no light (dye control); light and no MB (light control); MB and light (PDT). Morphologic characteristics were examined by transmission electron microscopy. The bactericidal effects of combined PDT and antibiotic therapy (ciprofloxacin, moxifloxacin, and amikacin) were determined using the broth microdilution technique. Twenty-one rabbits with Mycobacterium keratitis were randomly divided into three groups (no treatment, topical amikacin treatment, and PDT combined with amikacin treatment). The clinical features of keratitis were scored and graded before treatment and before euthanatization. The diseased corneas were trephined for quantitative bacteriologic analysis to determine the antibacterial efficacy of the treatment. In the in vitro tests, the bacterial count had a 2-log reduction immediately after PDT treatment at 100 J/cm(2) with 10(-3)% MB. After PDT at 100 J/cm(2) with 10(-2)% MB, almost no viable bacteria were detected. PDT had a synergistic antimicrobial effect in combination with antibiotics. The phototoxicity occurred in the cytoplasm first and then disrupted the mycobacterial cell walls by lysis. In the rabbit keratitis model, combined PDT resulted in significantly less bacterial burden (P PDT against Mycobacterium fortuitum. PDT could be a potential alternative treatment for nontuberculous mycobacterial corneal infections.

  20. Neuropsychology of music – a rapidly growing branch of psychology

    Directory of Open Access Journals (Sweden)

    Katarina Habe

    2010-05-01

    Full Text Available Relationship between brain and music is of interest to musicians, psychologists and neuroscientists. In recent years no other area of psychology of music has seen as much advancement as neuropsychology of music. The aim of the article is to present some main issues in the neuropsychology of music abroad and in Slovenia, to classify research studies into larger categories and to predict the future development of this field.There are different levels of inquiry into the neuropsychology of music: (1 the analysis of normal and abnormal psychological and physiological functions to determine the principles and modes by which the human brain processes, codifies, stores, and produces music, and (2 a description of the clinical deficits in music perception or performance resulting from localized or diffuse damage to the nervous system. Main topics that occupy neuropsychology of music are neuropsychological models of musical processing, functional imaging of musical perception and cognition, and the use of music as a therapeutic and clinical tool. Although some important studies have already been conducted since the year 2003, in Slovenia we faced a "formal" turning point in acknowledging the importance of the connection between music, mind and brain with the Sinapsa's Week of the brain 2009 under the title Brain and music.

  1. Energy Intensity analysis of Indian manufacturing industries

    Directory of Open Access Journals (Sweden)

    Archana Soni

    2017-09-01

    Full Text Available Energy has been recognized as one of the key inputs for the economic growth and social development of a country. India being one of the largest and rapidly growing developing countries, there is an impending energy crisis which requires immediate measures to be adopted. In this situation the concept of Energy Intensity comes under special focus to ensure energy security in an environmentally sustainable way. Energy Intensity of Indian manufacturing industries is among the highest in the world and stands for enormous energy consumption. Hence, reducing the Energy Intensity of Indian manufacturing industries is one of the challenges. This study attempts to analyse the factors which influence the Energy Intensity of Indian manufacturing industries and how they can be improved to reduce the Energy Intensity. The paper considers five of the largest energy consuming manufacturing industrial sectors in India viz. Aluminium, Cement, Iron & Steel Industries, Textile Industries and Fertilizer Industries and conducts a detailed Energy Intensity analysis using the data from PROWESS database of the Centre for Monitoring Indian Economy (CMIE for the period 2005–2014.

  2. Rebuilding America's Industrial Strength

    Science.gov (United States)

    Community College Journal, 2011

    2011-01-01

    It's no secret within the academic or manufacturing communities that community colleges are the nation's training ground for industrial-skilled trade careers. But outside community college classrooms and industrial plants, many people are in the dark about the growing numbers of these often-well-paid and in-demand jobs. This article introduces the…

  3. Hotel Crowdfunding Grows Up

    OpenAIRE

    Joshua Bowman

    2015-01-01

    Hotel crowdfunding is gaining momentum. Many of the largest real estate crowdfunding sites (such as Realty Mogul, Fundriser, Real Crowd and Prodigy Networks) frequently have hotel private placements mixed in with offerings for other types of real estate. In addition, a few crowdfunding sites that specifically focus on hotel crowdfunding have been created. The first hotel crowdfunding website dedicated solely to the hospitality industry was Hotel Innvestor, although others sites have recently ...

  4. Reasons for the Fast Growing Seawater Desalination Capacity in Algeria

    KAUST Repository

    Drouiche, Nadjib

    2011-05-24

    Seawater/brackish water desalination has been widely adopted by the Algerian Government in the last few years to supply potable water to municipality for various purposes mainly for domestic and industrial uses especially in areas where demand is high due to shortage of fresh water resources, rapid population growth and development of industry and tourism. Ten years ago, desalination was confined to the industrial use only especially in oil and gas industry as the country was relying on rain water and other available sources to supply fresh water to municipalities. Due to chronic drought conditions, the Ministry of Water Resources reviewed the national water strategy and a strong option for desalination was adopted where an ambitious program was thus put into action. Sixteen mega-plants, with capacities ranging from 100,000 to 500,000 m3 per day, primarily based on Reverse Osmosis technology, were launched in the last few years making the Algerian desalination program one of the world\\'s fastest growing markets. Five desalination plants, including the Africa\\'s largest seawater reverse osmosis project with a total capacity of 200,000 m3 per day, are already in operation and the remaining projects are either under construction or in commissioning. An integrated water resources management was also adopted as additional option to cuter the increasing water demand as there is also a great potential for water reuse and conventional water treatment. An additional benefit of this would be reducing the volume of treated wastewater disposed into the environment. © 2011 Springer Science+Business Media B.V.

  5. Rapid assessment of bovine spongiform encephalopathy prion inactivation by heat treatment in yellow grease produced in the industrial manufacturing process of meat and bone meals.

    Science.gov (United States)

    Yoshioka, Miyako; Matsuura, Yuichi; Okada, Hiroyuki; Shimozaki, Noriko; Yamamura, Tomoaki; Murayama, Yuichi; Yokoyama, Takashi; Mohri, Shirou

    2013-07-09

    Prions, infectious agents associated with transmissible spongiform encephalopathy, are primarily composed of the misfolded and pathogenic form (PrPSc) of the host-encoded prion protein. Because PrPSc retains infectivity after undergoing routine sterilizing processes, the cause of bovine spongiform encephalopathy (BSE) outbreaks are suspected to be feeding cattle meat and bone meals (MBMs) contaminated with the prion. To assess the validity of prion inactivation by heat treatment in yellow grease, which is produced in the industrial manufacturing process of MBMs, we pooled, homogenized, and heat treated the spinal cords of BSE-infected cows under various experimental conditions. Prion inactivation was analyzed quantitatively in terms of the infectivity and PrPSc of the treated samples. Following treatment at 140°C for 1 h, infectivity was reduced to 1/35 of that of the untreated samples. Treatment at 180°C for 3 h was required to reduce infectivity. However, PrPSc was detected in all heat-treated samples by using the protein misfolding cyclic amplification (PMCA) technique, which amplifies PrPScin vitro. Quantitative analysis of the inactivation efficiency of BSE PrPSc was possible with the introduction of the PMCA50, which is the dilution ratio of 10% homogenate needed to yield 50% positivity for PrPSc in amplified samples. Log PMCA50 exhibited a strong linear correlation with the transmission rate in the bioassay; infectivity was no longer detected when the log PMCA50 of the inoculated sample was reduced to 1.75. The quantitative PMCA assay may be useful for safety evaluation for recycling and effective utilization of MBMs as an organic resource.

  6. Provincial geology and the Industrial Revolution.

    Science.gov (United States)

    Veneer, Leucha

    2006-06-01

    In the early nineteenth century, geology was a new but rapidly growing science, in the provinces and among the gentlemen scientists of London, Oxford and Cambridge. Industry, particularly mining, often motivated local practical geologists, and the construction of canals and railways exposed the strata for all to see. The most notable of the early practical men of geology was the mineral surveyor William Smith; his geological map of England and Wales, published in 1815, was the first of its kind. He was not alone. The contributions of professional men, and the provincial societies with which they were connected, are sometimes underestimated in the history of geology.

  7. Growing unculturable bacteria.

    Science.gov (United States)

    Stewart, Eric J

    2012-08-01

    The bacteria that can be grown in the laboratory are only a small fraction of the total diversity that exists in nature. At all levels of bacterial phylogeny, uncultured clades that do not grow on standard media are playing critical roles in cycling carbon, nitrogen, and other elements, synthesizing novel natural products, and impacting the surrounding organisms and environment. While molecular techniques, such as metagenomic sequencing, can provide some information independent of our ability to culture these organisms, it is essentially impossible to learn new gene and pathway functions from pure sequence data. A true understanding of the physiology of these bacteria and their roles in ecology, host health, and natural product production requires their cultivation in the laboratory. Recent advances in growing these species include coculture with other bacteria, recreating the environment in the laboratory, and combining these approaches with microcultivation technology to increase throughput and access rare species. These studies are unraveling the molecular mechanisms of unculturability and are identifying growth factors that promote the growth of previously unculturable organisms. This minireview summarizes the recent discoveries in this area and discusses the potential future of the field.

  8. Machine accuracy for rapid prototyping of quality components

    Science.gov (United States)

    Gu, Peihua; Yan, May; Huang, X.; Zhang, Xiaochen

    1998-10-01

    Ever-growing global competition forces manufacturers to deliver more competitive products with better quality, lower price and in short time. One of the most important and challenging tasks faced by value-added product manufacturing industry is substantial reduction of product development time. Rapid prototyping technologies have received significant interests from both research and industrial communities. Due to the model accuracy, integrity and strength problems, their applications are limited. The most common sources of errors in the rapid prototyping and manufacturing systems including Cubital machines can be categorized as mathematical, process-related or material- related errors. In this paper, we present an analysis of accuracy of a Cubital Solider 4600 machine and an application on pattern and mould design and manufacturing. The experimental study determines the relationships between the machine accuracy and dimensions and parameter setting, which can be used to control the accuracy of parts to be built.

  9. Hotel Crowdfunding Grows Up

    Directory of Open Access Journals (Sweden)

    Joshua Bowman

    2015-08-01

    Full Text Available Hotel crowdfunding is gaining momentum. Many of the largest real estate crowdfunding sites (such as Realty Mogul, Fundriser, Real Crowd and Prodigy Networks frequently have hotel private placements mixed in with offerings for other types of real estate. In addition, a few crowdfunding sites that specifically focus on hotel crowdfunding have been created. The first hotel crowdfunding website dedicated solely to the hospitality industry was Hotel Innvestor, although others sites have recently been created such as iCrowdHotels and Equity Roots.

  10. Economic Gardening and the Grow Kentucky Program

    OpenAIRE

    Robbins, Lynn W.; Allen, James E. IV

    2015-01-01

    In 2014, the Community and Economic Development Initiative of Kentucky (CEDIK) and the Kentucky Small Business Development Center (KSBDC), launched Grow Kentucky, Kentucky’s only certified Economic Gardening program. The program helps second-stage entrepreneurial growth companies penetrate existing markets, identify new markets, monitor competitors, track industry trends, locate customer clusters, use search engine optimization/social media for marketing and various other customized research....

  11. Laws of motion in the for-profit health industry: a theory and three examples.

    Science.gov (United States)

    Stevenson, G

    1978-01-01

    The dynamics generated in the for-profit health industry by the drive for accumulation combine with the life cycle of a product to produce, within a given political framework, tendencies toward certain types of industry structure. The evolution of this structure is characterized by increased concentration of economic activity in diversified multinational corporations which combine health and non-health products. Three industries representing different stages of product and market development are analyzed in this article. The pharmacological industry is a mature industry dominated by large diversified multinational corporations which grow mainly through expansion abroad and diversification. The medical and dental instruments and supplies industry is newer, smaller, and faster growing. Its growth potential is attracting many companies an; increasing competition. The newest industry, investor-owned hospitals and hospital chains, is characterized by rapidly growing but still relatively small companies. The appendix, included to illustrate certain social, economic, and political issues, focuses on Medtronics, a highly scientific, fast-growing firm which produces electronic pacemakers.

  12. Rapid Prototyping Reconsidered

    Science.gov (United States)

    Desrosier, James

    2011-01-01

    Continuing educators need additional strategies for developing new programming that can both reduce the time to market and lower the cost of development. Rapid prototyping, a time-compression technique adapted from the high technology industry, represents one such strategy that merits renewed evaluation. Although in higher education rapid…

  13. Growing for different ends.

    Science.gov (United States)

    Catts, Oron; Zurr, Ionat

    2014-11-01

    Tissue engineering and regenerative biology are usually discussed in relation to biomedical research and applications. However, hand in hand with developments of this field in the biomedical context, other approaches and uses for non-medical ends have been explored. There is a growing interest in exploring spin off tissue engineering and regenerative biology technologies in areas such as consumer products, art and design. This paper outlines developments regarding in vitro meat and leather, actuators and bio-mechanic interfaces, speculative design and contemporary artistic practices. The authors draw on their extensive experience of using tissue engineering for non-medical ends to speculate about what lead to these applications and their possible future development and uses. Avoiding utopian and dystopian postures and using the notion of the contestable, this paper also mentions some philosophical and ethical consideration stemming from the use of non-medical approaches to tissue constructs. This article is part of a directed issue entitled: Regenerative Medicine: the challenge of translation. Copyright © 2014. Published by Elsevier Ltd.

  14. Industry, environment and health through 200 years in Manchester

    Energy Technology Data Exchange (ETDEWEB)

    Douglas, Ian; Hodgson, Rob; Lawson, Nigel [School of Geography, University of Manchester, Mansfield Cooper Building, M13 9PL Manchester (United Kingdom)

    2002-05-01

    The Manchester urban area evolved rapidly in the early 19th century from a series of small towns to a major industrial conurbation with huge material flows and worldwide trade connections. A combination of the availability of nearby coalfields, canals, and free trade, which encouraged entrepreneurial enterprise, made Manchester into the 'shock' city of the industrial revolution. Rapid nucleated urban growth associated with industrialisation throughout the 19th century involved an exponential growth in materials transfers and in waste flows. The 20th century suburban dispersal of residential and industrial growth led to further increase in the impact of the urban metabolism, especially in terms of mass: distance of materials movement. The current post-industrial phase in Greater Manchester has to cope with the environmental and social legacies of its industrial past and with growing per capita materials consumption and increases in number of households despite a nearly static population of around 2.5 million. Changes in material flows, land usage and river morphology in Greater Manchester over the past 200 years have reflected changing technologies, industry, economics, social expectations and environmental legislation. Manchester had the first passenger railway, the first inter-basin domestic water transfer in the UK, the first urban smokeless zones and was part of a pioneering land reclamation partnership in the 1970s. Even so, the environmental legacy of industrial material flows constantly presents new challenges, from the cost of reclaiming contaminated brownfield sites to finding destinations for today's urban waste.

  15. BIOTECHNOLOGY IN FRUIT GROWING

    Directory of Open Access Journals (Sweden)

    Z. Jurković

    2008-09-01

    Full Text Available Research studies in the area of biotechnologies in fruit growing started at the Agricultural Institute Osijek in 2006 with the establishment of the first experimental in vitro laboratory for micropropagation. The laboratory started an active research related to the Project "Biotechnological methods in fruit tree identification, selection and propagation" Project is part of program "Preservation and revitalization of grape and fruit autochthonous cultivars". The goal of this research is to determine genetic differences between autochthonous and introduced cultivars of cherry as well as cultivars and types of sour cherry, to find and optimize a method for fast recovery of clonal material. A great number of cherry cultivars and types within the population of cv. Oblacinska sour cherry exists in Croatia. A survey with the purpose of selecting autochthonous cultivars for further selection has been done in previous research. Differences have been found in a number of important agronomic traits within the populations of cv. Oblačinska sour cherry. Autochthonous cherry cultivars are suspected to be synonyms of known old cultivars which were introduced randomly and have been naturalized under a local name. Identification and description of cultivars and types of fruits is based on special visible properties which were measurable or notable. In this approach difficulties arise from the effect of non-genetic factors on expression of certain traits. Genetic-physiological problem of S allele autoincompatibility exists within cherry cultivars. Therefore it is necessary to put different cultivars in the plantation to pollinate each other. Apart form the fast and certain sort identification independent of environmental factors, biotechnological methods based on PCR enable faster virus detection compared with classical serologic methods and indexing and cover a wider range of plant pathogens including those undetectable by other methods. Thermotherapy and

  16. Growing Galaxies Gently

    Science.gov (United States)

    2010-10-01

    New observations from ESO's Very Large Telescope have, for the first time, provided direct evidence that young galaxies can grow by sucking in the cool gas around them and using it as fuel for the formation of many new stars. In the first few billion years after the Big Bang the mass of a typical galaxy increased dramatically and understanding why this happened is one of the hottest problems in modern astrophysics. The results appear in the 14 October issue of the journal Nature. The first galaxies formed well before the Universe was one billion years old and were much smaller than the giant systems - including the Milky Way - that we see today. So somehow the average galaxy size has increased as the Universe has evolved. Galaxies often collide and then merge to form larger systems and this process is certainly an important growth mechanism. However, an additional, gentler way has been proposed. A European team of astronomers has used ESO's Very Large Telescope to test this very different idea - that young galaxies can also grow by sucking in cool streams of the hydrogen and helium gas that filled the early Universe and forming new stars from this primitive material. Just as a commercial company can expand either by merging with other companies, or by hiring more staff, young galaxies could perhaps also grow in two different ways - by merging with other galaxies or by accreting material. The team leader, Giovanni Cresci (Osservatorio Astrofisico di Arcetri) says: "The new results from the VLT are the first direct evidence that the accretion of pristine gas really happened and was enough to fuel vigorous star formation and the growth of massive galaxies in the young Universe." The discovery will have a major impact on our understanding of the evolution of the Universe from the Big Bang to the present day. Theories of galaxy formation and evolution may have to be re-written. The group began by selecting three very distant galaxies to see if they could find evidence

  17. Management responsibilities in the retirement village industry: a New Zealand study.

    Science.gov (United States)

    Mathews, Pamela; Tozer, Lin; Walker, Robyn

    2004-10-01

    The Retirement Village/Rest Home industry is growing rapidly. Many of those fulfilling managerial roles within this industry do not appear to have management qualifications or prior managerial experience outside the public sector health system. If the industry is to effectively manage anticipated growth, managers may need to update their qualifications and knowledge base to ensure that they possess the skills and abilities required to meet changing business needs. This paper reports on an exploratory study designed to gather information that identifies the primary duties and responsibilites of retirement village managers and nurse managers, and their essential and desirable skills, attributes, and characteristics.

  18. Performance Evaluation of Industrial Land Policy in China

    Directory of Open Access Journals (Sweden)

    Xinqi Zheng

    2014-07-01

    Full Text Available Rapid industrialization, as one of the main driving forces promoting sustainable economic growth, has increased the area of industrial land use significantly. Industrial land use manifests that the competition between it and other kinds of land use is growing. During the last decade in China, many targeted industrial land use policies have been enacted to stimulate appropriate industrial land use and to promote healthy economic development. However, it is difficult for scholars and governments of rapidly developing countries to judge and evaluate the performance of such policies. Based on statistical data gathered over almost 10 years and an idea called “industrial land equivalent” (ILE, this paper analyzes the contribution made by the implementation of industrial land use policy to economic development, using a Cobb-Douglas production function by which to quantify the influence of land institutions and land regulation systems. The result of the study shows that factors, such as industrial land, labor and capital, all play an important role in GDP growth. Additionally, it is found that industrial land institutions and regulation systems have a strongly positive influence on economic development. It was also found that the influence of policy in eastern China is greater than that in the west and that repeated, short-term land regulation has a negative effect on the economy. Therefore, it is profoundly important for the Chinese economy that a stable and durable industrial land use policy be maintained as the industrial center migrates to the Midwest. The research philosophy and method offered by this paper have great significance for the quantitative evaluation of policy performance.

  19. Challenges of the growing African cement market – environmental issues, regulative framework, and quality infrastructure requirements

    Directory of Open Access Journals (Sweden)

    Schmidt Wolfram

    2018-01-01

    Full Text Available The African cement, concrete and construction business is growing at rapid pace. The cement sales are expected to grow rapidly until 2050. The number of newly built cement plants increases dramatically and in addition more cements are being imported from outside the continent, e.g. from Turkey, Pakistan, Indonesia, and China, driven by overcapacities in the countries of origin. This causes a high number of potentials and challenges at the same time. Newly built cement plants can operate directly at best technological state of the art and thus incorporate more sustainable technologies as well as produce new and more sustainable products such as cements blended with sustainable supplementary cementitious materials such as calcined clays, and industrial or agricultural by products. At the same time the new variety of binding agent as well as the international imports, which are driven by price considerations, make the cement market prone to quality scatter. This puts pressure on the quality control regulations and institutions to ensure safety of construction, healthy application, and environmental safety for the population. The paper presents possible solutions to build up the rapidly increasing African cement production more sustainably than in the rest of the world as well as the related challenges and obstacles that need to be overcome. Based on experiences with a series of pan-African cement testing laboratory proficiency schemes conclusions are made on technical, regulative and political level.

  20. Occupational exposures in the oil and gas extraction industry: State of the science and research recommendations.

    Science.gov (United States)

    Witter, Roxana Z; Tenney, Liliana; Clark, Suzanne; Newman, Lee S

    2014-07-01

    The oil and gas extraction industry is rapidly growing due to horizontal drilling and high volume hydraulic fracturing (HVHF). This growth has provided new jobs and economic stimulus. The industry occupational fatality rate is 2.5 times higher than the construction industry and 7 times higher than general industry; however injury rates are lower than the construction industry, suggesting injuries are not being reported. Some workers are exposed to crystalline silica at hazardous levels, above occupational health standards. Other hazards (particulate, benzene, noise, radiation) exist. In this article, we review occupational fatality and injury rate data; discuss research looking at root causes of fatal injuries and hazardous exposures; review interventions aimed at improving occupational health and safety; and discuss information gaps and areas of needed research. We also describe Wyoming efforts to improve occupational safety in this industry, as a case example. © 2014 Wiley Periodicals, Inc.

  1. Rapid medical advances challenge the tooling industry.

    Science.gov (United States)

    Conley, B

    2008-01-01

    The requirement for greater performance in smaller spaces has increased demands for product and process innovation in tubing and other medical products. In turn, these developments have placed greater demands on the producers of the advanced tooling for these products. Tooling manufacturers must now continuously design equipment with much tighter tolerances for more sophisticated coextrusions and for newer generations of multilumen and multilayer tubing.

  2. Unique variability of tocopherol composition in various seed oils recovered from by-products of apple industry: rapid and simple determination of all four homologues (α, β, γ and δ) by RP-HPLC/FLD.

    Science.gov (United States)

    Górnaś, Paweł

    2015-04-01

    The tocochromanol profile was studied in seed oils recovered from by-products of fruit industry, five dessert and seven crab apple varieties grown in Eastern Europe (Latvia). The seed oils obtained from dessert apples were characterized by higher contents of tocopherols (191.05-379.08 mg/100g oil) when compared to seed oils recovered from crab apples (130.55-202.54 mg/100g oil). The predominant homologues of tocopherol in all the studied samples were α and β over γ and δ. However, seed oils recovered from the apple cultivars 'Antej' and 'Beforest' had a unique profile of four tocopherol homologues (α:β:γ:δ) 91.41:80.55:72.46:79.03 and 114.55:112.84:78.69:73.00 mg/100g oil, respectively. A single dilution of seed oils in 2-propanol facilitated the direct use samples in the DPPH assay as well as injection into the RP-HPLC system containing a PFP (pentafluorophenyl) column, which resulted in a rapid separation of all four tocopherol homologues with excellent repeatability and reproducibility. Copyright © 2014 Elsevier Ltd. All rights reserved.

  3. A Scheduling Problem in the Baking Industry

    National Research Council Canada - National Science Library

    da Silva, Felipe Augusto Moreira; Moretti, Antonio Carlos; de Azevedo, Anibal Tavares

    2014-01-01

      This paper addresses a scheduling problem in an actual industrial environment of a baking industry where production rates have been growing every year and the need for optimized planning becomes...

  4. Vision Systems Illuminate Industrial Processes

    Science.gov (United States)

    2013-01-01

    When NASA designs a spacecraft to undertake a new mission, innovation does not stop after the design phase. In many cases, these spacecraft are firsts of their kind, requiring not only remarkable imagination and expertise in their conception but new technologies and methods for their manufacture. In the realm of manufacturing, NASA has from necessity worked on the cutting-edge, seeking new techniques and materials for creating unprecedented structures, as well as capabilities for reducing the cost and increasing the efficiency of existing manufacturing technologies. From friction stir welding enhancements (Spinoff 2009) to thermoset composites (Spinoff 2011), NASA s innovations in manufacturing have often transferred to the public in ways that enable the expansion of the Nation s industrial productivity. NASA has long pursued ways of improving upon and ensuring quality results from manufacturing processes ranging from arc welding to thermal coating applications. But many of these processes generate blinding light (hence the need for special eyewear during welding) that obscures the process while it is happening, making it difficult to monitor and evaluate. In the 1980s, NASA partnered with a company to develop technology to address this issue. Today, that collaboration has spawned multiple commercial products that not only support effective manufacturing for private industry but also may support NASA in the use of an exciting, rapidly growing field of manufacturing ideal for long-duration space missions.

  5. The future of the pharmaceutical, biological and medical device industry

    Directory of Open Access Journals (Sweden)

    Burgess LJ

    2011-09-01

    Full Text Available Lesley J Burgess, Marli TerblancheTREAD Research/Cardiology Unit, Department of Internal Medicine, Tygerberg Hospital and University of Stellenbosch, Parow, South AfricaAbstract: Numerous factors contribute to the declining pharmaceutical industry on the one hand and the rapidly growing generic industry together with the growing importance of medical devices and biologicals on the other. It is clear that the pharmaceutical industry is going to undergo a change in the next decade in order to meet the current challenges facing it and ultimately sustain its profitability and growth. This paper aims to identify a number of fairly obvious trends that are likely to have a significant impact on the product development pipeline in the next decade. It is more than clear that the current production pipeline for pharmaceutical, biotechnology and medical device industries is no longer sustainable and that urgent interventions are required in order to maintain its current level of profitability.Keywords: pharmaceutical industry, personalized medicine, trends, generics, biotechnology

  6. Competitiveness of the European Automobile Industry in the Global Context

    Directory of Open Access Journals (Sweden)

    Vošta Milan

    2017-06-01

    Full Text Available The automobile industry is one of the most rapidly growing industries, a significant employer and investor in research and development, and also one of the most important sectors of the EU economy. Nevertheless, even this sector has gone through a series of structural changes and territorial transfers, recently. Exactly for this reason, it seems crucial to examine the competitiveness of the automobile industry on the national level, analyze the long-term trends throughout the whole EU, and put them in a global context. The article uses standard methods of statistical analysis of indices of revealed symmetrical comparative advantage to detect the trends characterizing the shape and long-term development of the automobile industry in Europe. The authors point out the substantial shift s in production and exports from traditional Western European car makers in favor of the new EU member states, but also from the USA and Canada in favor of new, fast-growing developing countries in the South and Southeast Asia and in Latin America. A brief outline of the European Commission’s response to these changes in the European automobile industry in the form of an Action Plan CARS 2020 can be found in the final part of the article.

  7. Tobacco-control policies in tobacco-growing states: where tobacco was king.

    Science.gov (United States)

    Fallin, Amanda; Glantz, Stanton A

    2015-06-01

    POLICY POINTS: The tobacco companies prioritized blocking tobacco-control policies in tobacco-growing states and partnered with tobacco farmers to oppose tobacco-control policies. The 1998 Master Settlement Agreement, which settled state litigation against the cigarette companies, the 2004 tobacco-quota buyout, and the companies' increasing use of foreign tobacco led to a rift between the companies and tobacco farmers. In 2003, the first comprehensive smoke-free local law was passed in a major tobacco-growing state, and there has been steady progress in the region since then. Health advocates should educate the public and policymakers on the changing reality in tobacco-growing states, notably the major reduction in the volume of tobacco produced. The 5 major tobacco-growing states (Kentucky, North Carolina, South Carolina, Tennessee, and Virginia) are disproportionately affected by the tobacco epidemic, with higher rates of smoking and smoking-induced disease. These states also have fewer smoke-free laws and lower tobacco taxes, 2 evidence-based policies that reduce tobacco use. Historically, the tobacco farmers and hospitality associations allied with the tobacco companies to oppose these policies. This research is based on 5 detailed case studies of these states, which included key informant interviews, previously secret tobacco industry documents (available at http://legacy.library.ucsf.edu), and media articles. This was supplemented with additional tobacco document and media searches specifically for this article. The tobacco companies were particularly concerned about blocking tobacco-control policies in the tobacco-growing states by promoting a pro-tobacco culture, beginning in the late 1960s. Nevertheless, since 2003, there has been rapid progress in the tobacco-growing states' passage of smoke-free laws. This progress came after the alliance between the tobacco companies and the tobacco farmers fractured and hospitality organizations stopped opposing smoke

  8. Indian IT industry: a performance analysis and a model for possible adoption

    OpenAIRE

    Mathur, Somesh Kumar

    2007-01-01

    India's software and services exports have been rising rapidly. The annual growth rate ranges between 20 -22% in IT services and nearly 55 % in IT-enabled services (ITES), such as call centres, Business Process Outsourcing ( BPO) and other administrative support operations. Together they are predicted to grow at 25% pa till 2010.The IT industry is highly export oriented and the exporters are predominantly Indian. The Indian BPOs (ITES) are moving up the value chain, handling high end data for...

  9. Public-policy responsibilities in a restructured electricity industry

    Energy Technology Data Exchange (ETDEWEB)

    Tonn, B.; Hirst, E.; Bauer, D.

    1995-06-01

    In this report, we identify and define the key public-policy values, objectives, and actions that the US electricity industry currently meets. We also discuss the opportunities for meeting these objectives in a restructured industry that relies primarily on market forces rather than on government mandates. And we discuss those functions that governments might undertake, presumably because they will not be fully met by a restructured industry on its own. These discussions are based on a variety of inputs. The most important inputs came from participants in an April 1995 workshop on Public-Policy Responsibilities and Electric Industry Restructuring: Shaping the Research Agenda. Other sources of information and insights include the reviews of a draft of this report by workshop participants and others and the rapidly growing literature on electric-industry restructuring and its implications. One of the major concerns about the future of the electricity industry is the fate of numerous social and environmental programs supported by today`s electric utilities. Many people worry that a market-driven industry may not meet the public-policy objectives that electric utilities have met in the past. Examples of potentially at-risk programs include demand-side management (DSM), renewable energy, low-income weatherization, and fuel diversity. Workshop participants represented electric utilities, public utility commissions (PUCs), state energy offices, public-interest groups, other energy providers, and the research community.

  10. Threats to global health and survival: the growing crises of tropical infectious diseases--our "unfinished agenda".

    Science.gov (United States)

    Guerrant, R L; Blackwood, B L

    1999-05-01

    Health, one of our most unassailable human values, transcends all geographic, political, and cultural boundaries. The health problems of the rapidly growing 80% of the world's population that live in the tropical developing countries of Asia, Africa, and Latin America pose major threats to industrialized as well as developing regions. These threats can be divided into three areas, or three "E"s: (1) emerging, reemerging, and antimicrobial-resistant infections; (2) exploding populations without improved health; and (3) erosion of our humanity or leadership if we ignore the growing health problems of the poor. Our assessment of current trends in global population distribution and resource consumption; DALY calculations, causes, and distribution of global mortality and morbidity; and the misperceptions about and maldistribution of resources for health point to the critical importance of addressing tropical infectious diseases and global health for preservation of democracy and civilization as we know it.

  11. Growing Concerns With Workplace Incivility.

    Science.gov (United States)

    Collins, Natasha Renee; Rogers, Bonnie

    2017-11-01

    Workplace incivility (WPI) is a growing issue across all public and private sectors. Occupational and environmental health nurses can educate employees and management about WPI, its risk factors and characteristics, and ways to reduce incidents of WPI.

  12. Growing families in a shrinking world: legal and ethical challenges in cross-border surrogacy.

    Science.gov (United States)

    Crockin, Susan L

    2013-12-01

    Crossing national borders to have children is a rapidly growing phenomenon, fuelled by restrictions on access and technologies in some countries and for some patients, by high costs in others, and all generating a burgeoning multibillion dollar international industry. Cross-border gestational surrogacy is one form of family building that challenges legal, policy and ethical norms between countries and puts both intended parents and gestational surrogates at risk, and can leave the offspring of these arrangements vulnerable in a variety of ways, including parent-child, immigration and citizenship status. The widely varying political, religious and legal views amongst countries make line drawing and rule making challenging. This article reviews recent court decisions about and explores the legal dimensions of cross-border surrogacy. Copyright © 2013 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

  13. Aeronautics Education, Research, and Industry Alliance (AERIAL) Year 2 Report and Year 3 Proposal

    Science.gov (United States)

    Bowen, Brent D.; Box, Richard C.; Fink, Mary M.; Gogos, Geroge; Lehrer, Henry R.; Narayanan, Ram M.; Nickerson, Jocelyn S.; Tarry, Scott E.; Vlasek, Karisa D.

    2003-01-01

    The Aeronautics Education, Research, and Industry Alliance (AERIAL): a comprehensive, multi-faceted NASA EPSCoR 2000 initiative, contributes to the strategic research and technology priorities of NASA while intensifying Nebraska s rapidly growing aeronautics research and development endeavors. AERIAL enables Nebraska researchers to: (a) continue strengthening their collaborative relationships with NASA Field Centers, Codes, and Enterprises; (b) increase the capacity of higher education throughout Nebraska to invigorate and expand aeronautics research; and (c) expedite the development of aeronautics-related research infrastructure and industry in the state. This report contains a summary of AERIAL's activities and accomplishments during the second year of implementation. The AERIAL Year 3 proposal is also included.

  14. Images of industry: coal

    Energy Technology Data Exchange (ETDEWEB)

    Thornes, R.

    1994-12-31

    Numerous buildings and structures associated with coalmining have been made redundant by the recent and rapid contraction of the industry and many now face an uncertain future. The photographs in this book form part of a comprehensive record of coal-industry architecture made by the Royal Commission in response to that threat. From pit-head baths and colliery headgear to model housing and miners` memorials, these images capture the full variety of the coal industry`s impact on the environment. The supporting text explains the history and development of building types that have been taken for granted up to now, but which, looked at in detail, tell the fascinating story of a once-mighty industry. 82 refs., 120 photos.

  15. Industrial applications of nanoparticles.

    Science.gov (United States)

    Stark, W J; Stoessel, P R; Wohlleben, W; Hafner, A

    2015-08-21

    Research efforts in the past two decades have resulted in thousands of potential application areas for nanoparticles - which materials have become industrially relevant? Where are sustainable applications of nanoparticles replacing traditional processing and materials? This tutorial review starts with a brief analysis on what makes nanoparticles attractive to chemical product design. The article highlights established industrial applications of nanoparticles and then moves to rapidly emerging applications in the chemical industry and discusses future research directions. Contributions from large companies, academia and high-tech start-ups are used to elucidate where academic nanoparticle research has revolutionized industry practice. A nanomaterial-focused analysis discusses new trends, such as particles with an identity, and the influence of modern instrument advances in the development of novel industrial products.

  16. Performance characteristics of growing rabbits fed diet based on a ...

    African Journals Online (AJOL)

    A feeding trial using twenty four cross bred 8-9 weeks old rabbits was conducted to investigate the effect of feeding cerelac waste - CW (a by-product of the infant food industry considered as waste) on the performance and organ characteristics of growing rabbits. Three experimental diets were formulated with diet 1 serving ...

  17. Growing Oppression, Growing Resistance : LGBT Activism and Europeanisation in Macedonia

    NARCIS (Netherlands)

    Miškovska Kajevska, A.; Bilić, B.

    2016-01-01

    This chapter provides one of the first socio-historical overviews of the LGBT groups in Macedonia and argues that an important impetus for the proliferation of LGBT activities has been the growing state-endorsed homophobia starting from 2008. The homophobic rhetoric of the ruling parties was clearly

  18. Industry Employment

    Science.gov (United States)

    Occupational Outlook Quarterly, 2012

    2012-01-01

    This article illustrates projected employment change by industry and industry sector over 2010-20 decade. Workers are grouped into an industry according to the type of good produced or service provided by the establishment for which they work. Industry employment projections are shown in terms of numeric change (growth or decline in the total…

  19. Growing Pains for New Energy-Saving Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Kurtz, S.

    2004-10-01

    As we contemplate a revolution in the lighting industry, it is yet unclear in what form tomorrow's solid-state lighting will emerge. Similarly, photovoltaic (PV) power supplied on a utility scale may take a different form from today's flat-plate silicon modules. The success of the PV industry-now a multibillion dollar a year industry and growing at more than 25% per year-has largely come from integrating solar cells into other products. In many cases, this integration required the formation of new business entities. The solid-state lighting industry faces hurdles that are similar to those faced by the PV industry. Therefore, based on the experiences of the PV industry and others, we predict that the growing pains of the solid-state lighting industry will include: (1) identifying entry markets, (2) integrating light-emitting diodes into attractive products, (3) attaining high reliability for these products, and (4) increasing production of these products, thus lowering costs and opening up new markets. These activities must be implemented, keeping in mind that most consumers do not care about buying ''solid-state lighting'' and ''solar cells.'' Rather, they want to buy attractive lighting and inexpensive electricity.

  20. The condition of the poultry industry in Poland

    Directory of Open Access Journals (Sweden)

    Iwona Kozioł

    2014-08-01

    Full Text Available The poultry industry in Poland is characterized by high dynamics of development and in this regard was placed at the forefront of European Union countries. The main reason for the acceleration and modernization of the industry was the Polish accession to the European Union. Sanitary and veterinary requirements, and rules on the placing of poultry products in the trade, which our country was obliged to fulfill, led to the sector producing products with a high level of security. Rapidly growing domestic demand and foreign markets for Polish products affectes the growth of poultry production. Consumers are attracted primarily by the high quality products and reasonable price, as well as the relatively low cost of production. The industry has become an example of what can grow even in a crisis. As a result of changes occurring in the Polish market, meat and aspecially poultry meat is becoming increasingly important, becoming an essential part of the economy. Forecasts for the poultry industry in 2014 are positive, sae to an anticipated decline in grain prices and a limited supply of pork and beef. This will increase the global and the European Union demand for white meat, due to its nutritional properties and competitive prices.

  1. Food Security Hotspots in India under Changing Climate and Growing Populatio

    Science.gov (United States)

    Singh, N.; Cherkauer, K. A.; Ashfaq, M.; Rastogi, D.

    2015-12-01

    Global climate change, unprecedented population growth, and rapid urbanization have elevated the possibility of food and water shortages in many regions across the world. The likelihood of such shortages in the future is further exacerbated by the fact that increased greenhouse forcing and rapid growth in human population will continue for at least the next several decades. These socio-environmental changes will likely put some regions under enormous economic and environmental stress by forcing them to adapt to new conditions. India with its rapidly growing population and high rates of urbanization and industrialization is one such region whose agricultural resources will be particularly vulnerable to the impact of these changes. This study collectively reviews and analyses the possible impacts of climate change, population growth and resulting land use change on the availability of food and water in the coming decades for India. By analyzing and fusing a wide variety of existing data and research on the impact of land use change, population, and climate change, on water and food resources this study develops an understanding of the broader implications of each of the changes on food security in the region. In addition, the study focuses on the need to assess and quantify the combination of such impacts at a regional level and identify food security hotspots spatially across India that will help to narrow down regions in the country which will be severely affected and need priority adaptation and mitigation measures.

  2. THE FASTEST GROWING LEAST DEVELOPED COUNTRIES

    Directory of Open Access Journals (Sweden)

    Wioletta NOWAK

    2017-12-01

    Full Text Available The paper presents trends in economic growth and development in twelve least developed countries from 2006 to 2015. The study is based on the data retrieved from the World Bank Database. During the analysed 10 years, seven Asian (Myanmar, Lao PDR, Bhutan, Cambodia, Timor-Leste, Bangladesh, and Afghanistan and five African (Ethiopia, Rwanda, Angola, Sudan, and Mozambique LDCs had average annual GDP per capita growth rates higher than 4.0%. GDP has been largely generated through the services and industry sectors. A few LDCs sustained strong growth mainly because of foreign assistance and in other countries remittances were a significant source of development finance. Resource rich countries recorded high inflows of foreign direct investment. In a few fast growing LDCs the state has been heavily engaged in economy. The analysed LDCs substantially improved their development indicators.

  3. Exploring Classroom Hydroponics. Growing Ideas.

    Science.gov (United States)

    National Gardening Association, Burlington, VT.

    Growing Ideas, the National Gardening Association's series for elementary, middle, and junior high school educators, helps teachers engage students in using plants and gardens as contexts for developing a deeper, richer understanding of the world around them. This volume's focus is on hydroponics. It presents basic hydroponics information along…

  4. Growing Patterns: Seeing beyond Counting

    Science.gov (United States)

    Markworth, Kimberly A.

    2012-01-01

    Over the past two decades, mathematical patterns have been acknowledged as important early components of children's development of algebraic reasoning (NCTM 2000). In particular, growing patterns have attracted significant attention as a context that helps students develop an understanding of functional relationships (Lee and Freiman 2006; Moss et…

  5. Organization of growing random networks

    Energy Technology Data Exchange (ETDEWEB)

    Krapivsky, P. L.; Redner, S.

    2001-06-01

    The organizational development of growing random networks is investigated. These growing networks are built by adding nodes successively, and linking each to an earlier node of degree k with an attachment probability A{sub k}. When A{sub k} grows more slowly than linearly with k, the number of nodes with k links, N{sub k}(t), decays faster than a power law in k, while for A{sub k} growing faster than linearly in k, a single node emerges which connects to nearly all other nodes. When A{sub k} is asymptotically linear, N{sub k}(t){similar_to}tk{sup {minus}{nu}}, with {nu} dependent on details of the attachment probability, but in the range 2{lt}{nu}{lt}{infinity}. The combined age and degree distribution of nodes shows that old nodes typically have a large degree. There is also a significant correlation in the degrees of neighboring nodes, so that nodes of similar degree are more likely to be connected. The size distributions of the in and out components of the network with respect to a given node{emdash}namely, its {open_quotes}descendants{close_quotes} and {open_quotes}ancestors{close_quotes}{emdash}are also determined. The in component exhibits a robust s{sup {minus}2} power-law tail, where s is the component size. The out component has a typical size of order lnt, and it provides basic insights into the genealogy of the network.

  6. Right-Rapid-Rough

    Science.gov (United States)

    Lawrence, Craig

    2003-01-01

    IDEO (pronounced 'eye-dee-oh') is an international design, engineering, and innovation firm that has developed thousands of products and services for clients across a wide range of industries. Its process and culture attracted the attention of academics, businesses, and journalists around the world, and are the subject of a bestselling book, The Art of Innovation by Tom Kelley. One of the keys to IDEO's success is its use of prototyping as a tool for rapid innovation. This story covers some of IDEO's projects, and gives reasons for why they were successful.

  7. Rapid Prototyping

    Science.gov (United States)

    1999-01-01

    Javelin, a Lone Peak Engineering Inc. Company has introduced the SteamRoller(TM) System as a commercial product. The system was designed by Javelin during a Phase II NASA funded small commercial product. The purpose of the invention was to allow automated-feed of flexible ceramic tapes to the Laminated Object Manufacturing rapid prototyping equipment. The ceramic material that Javelin was working with during the Phase II project is silicon nitride. This engineered ceramic material is of interest for space-based component.

  8. Industrial applications of computed tomography

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo; Carmignato, S.; Kruth, J. -P.

    2014-01-01

    The number of industrial applications of Computed Tomography(CT) is large and rapidly increasing. After a brief market overview, the paper gives a survey of state of the art and upcoming CT technologies, covering types of CT systems, scanning capabilities, and technological advances. The paper...... contains a survey of application examples from the manufacturing industry as well as from other industries, e.g., electrical and electronic devices, inhomogeneous materials, and from the food industry. Challenges as well as major national and international coordinated activities in the field of industrial...

  9. Conserving the Appalachian medicinal plant industry

    Science.gov (United States)

    James L. Chamberlain

    2006-01-01

    An industry based on plants that flourish in the mountains of Appalachia is at a critical crossroads. The medicinal plant industry has relied on the conservation of Appalachian forest resources for more than 300 years. There is growing and widespread concern that many of the species, on which this vibrant and substantial industry depends, are being depleted and...

  10. Turkey opens electricity markets as demand grows

    Energy Technology Data Exchange (ETDEWEB)

    McKeigue, J.; Da Cunha, A.; Severino, D. [Global Business Reports (United States)

    2009-06-15

    Turkey's growing power market has attracted investors and project developers for over a decade, yet their plans have been dashed by unexpected political or financial crises or, worse, obstructed by a lengthy bureaucratic approval process. Now, with a more transparent retail electricity market, government regulators and investors are bullish on Turkey. Is Turkey ready to turn the power on? This report closely examine Turkey's plans to create a power infrastructure capable of providing the reliable electricity supplies necessary for sustained economic growth. It was compiled with on-the-ground research and extensive interview with key industrial and political figures. Today, hard coal and lignite account for 21% of Turkey's electricity generation and gas-fired plants account for 50%. The Alfin Elbistan-B lignite-fired plant has attracted criticism for its lack of desulfurization units and ash dam facilities that have tarnished the industry's image. A 1,100 MW hard-coal fired plant using supercritical technology is under construction. 9 figs., 1 tab.

  11. Industrial Engineering

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally).......Industrial engineering is a discipline that is concerned with increasing the effectiveness of (primarily) manufacturing and (occasionally)....

  12. Industrial bronchitis

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/000072.htm Industrial bronchitis To use the sharing features on this page, please enable JavaScript. Industrial bronchitis is swelling (inflammation) of the large airways ...

  13. Growing random networks with fitness

    OpenAIRE

    Ergun, G.; Rodgers, GJ

    2001-01-01

    Three models of growing random networks with fitness dependent growth rates are analysed using the rate equations for the distribution of their connectivities. In the first model (A), a network is built by connecting incoming nodes to nodes of connectivity $k$ and random additive fitness $\\eta$, with rate $(k-1)+ \\eta $. For $\\eta >0$ we find the connectivity distribution is power law with exponent $\\gamma=+2$. In the second model (B), the network is built by connecting nodes to nodes of conn...

  14. Open Learning within Growing Businesses

    Science.gov (United States)

    Klofsten, Magnus; Jones-Evans, Dylan

    2013-01-01

    Purpose: Understanding the factors behind successful enterprise policy interventions are critical in ensuring effective programme development. The aim of this paper is to analyse an academic-industry initiative in Sweden developed to support knowledge-intensive businesses in expanding their operations. Design/methodology/approach: This paper…

  15. Neural-like growing networks

    Science.gov (United States)

    Yashchenko, Vitaliy A.

    2000-03-01

    On the basis of the analysis of scientific ideas reflecting the law in the structure and functioning the biological structures of a brain, and analysis and synthesis of knowledge, developed by various directions in Computer Science, also there were developed the bases of the theory of a new class neural-like growing networks, not having the analogue in world practice. In a base of neural-like growing networks the synthesis of knowledge developed by classical theories - semantic and neural of networks is. The first of them enable to form sense, as objects and connections between them in accordance with construction of the network. With thus each sense gets a separate a component of a network as top, connected to other tops. In common it quite corresponds to structure reflected in a brain, where each obvious concept is presented by certain structure and has designating symbol. Secondly, this network gets increased semantic clearness at the expense owing to formation not only connections between neural by elements, but also themselves of elements as such, i.e. here has a place not simply construction of a network by accommodation sense structures in environment neural of elements, and purely creation of most this environment, as of an equivalent of environment of memory. Thus neural-like growing networks are represented by the convenient apparatus for modeling of mechanisms of teleological thinking, as a fulfillment of certain psychophysiological of functions.

  16. Rapid response manufacturing (RRM)

    Energy Technology Data Exchange (ETDEWEB)

    Cain, W.D. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Waddell, W.L. [National Centers for Manufacturing Sciences, Ann Arbor, MI (United States)

    1997-02-18

    US industry is fighting to maintain its competitive edge in the global market place. Today markets fluctuate rapidly. Companies, to survive, have to be able to respond with quick-to-market, improved, high quality, cost efficient products. The way products are developed and brought to market can be improved and made more efficient through the proper incorporation of emerging technologies. The RRM project was established to leverage the expertise and resources of US private industries and federal agencies to develop, integrate, and deploy new technologies that meet critical needs for effective product realization. The RRM program addressed a needed change in the US Manufacturing infrastructure that will ensure US competitiveness in world market typified by mass customization. This project provided the effort needed to define, develop and establish a customizable infrastructure for rapid response product development design and manufacturing. A major project achievement was the development of a broad-based framework for automating and integrating the product and process design and manufacturing activities involved with machined parts. This was accomplished by coordinating and extending the application of feature-based product modeling, knowledge-based systems, integrated data management, and direct manufacturing technologies in a cooperative integrated computing environment. Key technological advancements include a product model that integrates product and process data in a consistent, minimally redundant manner, an advanced computer-aided engineering environment, knowledge-based software aids for design and process planning, and new production technologies to make products directly from design application software.

  17. Kunststofverwerkende industrie

    NARCIS (Netherlands)

    Eijssen PHM; Duesmann HB; Poel P van der; Koot JE

    1993-01-01

    This document on plastics processing industry has been published within the SPIN project. In this project information has been collected on industrial plants or industrial processes to afford support to governmental policy on emission reduction. This document contains information on the processes,

  18. [Myopia, a growing health problem

    NARCIS (Netherlands)

    Tideman, J.W.; Polling, J.R.; Schans, A. van der; Verhoeven, V.J.; Klaver, C.C.W.

    2016-01-01

    - Myopia is the eye disorder with the most rapid increase in prevalence worldwide. It develops in childhood, with a peak incidence between the ages of 13 to 15 years. - Especially high myopia, i.e. a refractive error of -6 diopters or more, increases the risk of permanent visual impairment during

  19. Waste Management in Industrial Construction: Investigating Contributions from Industrial Ecology

    Directory of Open Access Journals (Sweden)

    Larissa A. R. U. Freitas

    2017-07-01

    Full Text Available The need for effective construction waste management is growing in importance, due to the increasing generation of construction waste and to its adverse impacts on the environment. However, despite the numerous studies on construction waste management, recovery of construction waste through Industrial Symbiosis and the adoption of other inter-firm practices, comprised within Industrial Ecology field of study, have not been fully explored. The present research aims to investigate Industrial Ecology contributions to waste management in industrial construction. The waste management strategies adopted in two industrial construction projects in Brazil are analyzed. The main waste streams generated are identified, recycling and landfilling diversion rates are presented and waste recovery through Industrial Symbiosis is discussed. A SWOT analysis was carried out. Results demonstrate that 9% of the waste produced in one of the projects was recovered through Industrial Symbiosis, while in the other project, waste recovery through Industrial Symbiosis achieved the rate of 30%. These data reveal Industrial Symbiosis’ potential to reduce landfilling of industrial construction wastes, contributing to waste recovery in construction. In addition, results show that industrial construction projects can benefit from the following synergies common in Industrial Ecology place-based approaches: centralized waste management service, shared waste management infrastructure and administrative simplification.

  20. Managing Scarce Water Resources in China's Coal Power Industry

    Science.gov (United States)

    Zhang, Chao; Zhong, Lijin; Fu, Xiaotian; Zhao, Zhongnan

    2016-06-01

    Coal power generation capacity is expanding rapidly in the arid northwest regions in China. Its impact on water resources is attracting growing concerns from policy-makers, researchers, as well as mass media. This paper briefly describes the situation of electricity-water conflict in China and provides a comprehensive review on a variety of water resources management policies in China's coal power industry. These policies range from mandatory regulations to incentive-based instruments, covering water withdrawal standards, technological requirements on water saving, unconventional water resources utilization (such as reclaimed municipal wastewater, seawater, and mine water), water resources fee, and water permit transfer. Implementing these policies jointly is of crucial importance for alleviating the water stress from the expanding coal power industry in China.

  1. Energy Transition for Industry: India and the Global Context

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    This publication further develops the analysis presented in the India chapter of Energy Technology Perspectives 2010 and provides insights on the implications of achieving deep energy and CO2 emission cuts in the industrial sector both for India and globally. It investigates the least-cost combination of options that can significantly reduce energy and CO2 emissions in India's industrial sector, while enabling the Indian economy to continue to grow and alleviate energy poverty. For India to play its part in helping to realise deep cuts in global CO2 emissions by the middle of the 21st century, it will need to achieve rapid economic development over the next 40 years with only a very small increase in emissions. Currently there is no precedent for such a low-CO2 development path. The challenge for India will be to achieve strong economic growth while improving energy security, but without locking in high emissions.

  2. Troubled waters: Growing climate and population pressures in ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2014-04-09

    Apr 9, 2014 ... Rapid urbanization is squeezing India's limited water resources. While climate change may compound the problem, research in two southern watersheds points to industrial pollution, unregulated extraction, and changes in land use as the greatest threats to water quality and availability.

  3. Industrial Waste

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund

    2011-01-01

    Industrial waste is waste from industrial production and manufacturing. Industry covers many industrial sectors and within each sector large variations are found in terms of which raw materials are used, which production technology is used and which products are produced. Available data on unit...... generation rates and material composition as well as determining factors are discussed in this chapter. Characterizing industrial waste is faced with the problem that often only a part of the waste is handled in the municipal waste system, where information is easily accessible. In addition part...... of the industrial waste may in periods, depending on market opportunities and prices, be traded as secondary rawmaterials. Production-specificwaste from primary production, for example steel slag, is not included in the current presentation. In some countries industries must be approved or licensed and as part...

  4. Progress in Industrial Mathematics at ECMI 96

    DEFF Research Database (Denmark)

    Proceedings of the 9th conference of the European Consortium for Mathematics in Industry, ECMI 96, Technincal University of Denmark. The use of mathematical models in industry is steadily growing. There is a continous need in industry for new and efficient mathematical techniques, and university...... mathematicians get inspiration from industrial demands. The European Consortium for Mathematics in Industry aims to create contact between industry and academia, and to promote research in industrial mathematics. This book contains a broad spectrum of mathematics applied to industrial problems. Applied...... mathematics, case studies, and review papers in the following fields are included: Environmental modelling, railway systems, industrial processes, electronics, ships, oil industry, optimization, machine dynamics, fluids in industry. Applied mathematicians and other professionals working in academia...

  5. Growing Up” and the Environment

    Directory of Open Access Journals (Sweden)

    Robert M. Malina

    2012-06-01

    Full Text Available Many factors in the natural, man-made and social environments can influence the physical growth and maturation and behavioral development of children and adolescents. Improved environmental conditions over the past century or so have contributed to positive secular changes in growth and maturation. More recently, however, technological advances have increased opportunities for sedentary behaviors and contributed to reductions in physical activity, both of which have potentially negative implications for the health of youth. Pollutants associa-ted with some industries also have implications for health. Children with elevated lead levels are at increased risk for impaired growth and maturation and for impairments in fine motor coordination. The impact of elevated lead on gross motor coordination in several tests of physical fitness is mediated through the influence of lead on growth in body size. Similarly, emissions from coal-fired power plants and other industries are associated with asthma, which has implications for the physical activity and fitness of youth.

  6. The Impact of Clustering on the Innovativeness Of Furniture Industry

    Directory of Open Access Journals (Sweden)

    Grzegorzewska Emilia

    2014-06-01

    Full Text Available The furniture industry in Poland is a rapidly growing area of the economy. The level of innovation strongly influences furniture enterprises competitive position on the market. To support innovation, small and medium furniture industry businesses are affiliate in cluster initiatives. It supports the area of R&D, joint promotional campaigns and financing of new ventures. The paper presents selected furniture industry cluster initiatives that implement policies to support innovation activities of enterprises affiliated to them. In Poland, more and more furniture industry businesses brings together in cluster initiatives that aim to improve their market competitiveness and increase the level of innovation. Taken studies allow to analyse the direction of innovative activities undertaken by companies of the furniture industry with particular emphasis on the ones associated in clusters. Thus the aim of the article is to investigate the interest of Polish furniture enterprises (especially SMEs, in participation in clusters. Moreover the benefits of that choice and its impact on Polish furniture manufacturers innovativeness are evaluated.

  7. SYSTEM SUPPORT INNOVATIVE DEVELOPMENT OF INDUSTRY IN THE REGION

    Directory of Open Access Journals (Sweden)

    Titov V. V.

    2016-06-01

    Full Text Available The structure of the economy of the Novosibirsk region is characterized by relatively low value added and technological backwardness of many industries combined with a low level of innovation activity of enterprises and organizations, low level of specialization and cooperation make many types of products and services uncompetitive in global markets. These factors in the face of declining economic growth and growing uncertainty and instability of the external environment determine the need to develop monitoring systems and the promotion of regional innovative development of the industry. The relevance of such development is defined as strategic installations of the development of the Russian economy, asked the leadership of the country is a transition to a new technological structure, the change of the economic structure, the development of import substitution, the rapid development of territories and as a consequence economic growth and improve the quality and living standards of the population. The hierarchy of the system of regional strategic planning is built in the framework of reindustrialization conceptiei. Reindustrialization - this is a new, state-supported, economic policy aimed at upgrading industrial and technological basis of the entire economic system, designed to ensure the realization of strategic development goals of the region (Novosibirsk region, determining sectoral and other priorities support industry and business, forming principles development of an existing industrial and innovative potential oriented cluster structure and complete the technological chain of creation of innovative products, providing overcoming infrastructure constraints and the establishment of a quality business climate.

  8. How Rapid is Rapid Prototyping? Analysis of ESPADON Programme Results

    Directory of Open Access Journals (Sweden)

    Ian D. Alston

    2003-05-01

    Full Text Available New methodologies, engineering processes, and support environments are beginning to emerge for embedded signal processing systems. The main objectives are to enable defence industry to field state-of-the-art products in less time and with lower costs, including retrofits and upgrades, based predominately on commercial off the shelf (COTS components and the model-year concept. One of the cornerstones of the new methodologies is the concept of rapid prototyping. This is the ability to rapidly and seamlessly move from functional design to the architectural design to the implementation, through automatic code generation tools, onto real-time COTS test beds. In this paper, we try to quantify the term “rapid” and provide results, the metrics, from two independent benchmarks, a radar and sonar beamforming application subset. The metrics show that the rapid prototyping process may be sixteen times faster than a conventional process.

  9. Kunststofverwerkende industrie

    OpenAIRE

    Eijssen PHM; Duesmann HB; van der Poel P; Koot JE

    1993-01-01

    This document on plastics processing industry has been published within the SPIN project. In this project information has been collected on industrial plants or industrial processes to afford support to governmental policy on emission reduction. This document contains information on the processes, emission sources, emissions to air and water, waste, emission factors, use of energy and energy factors, emission reduction, energy conservation, research on clean technology and standards and licen...

  10. Transport of Nutrients Determines Growth in Tissue Culture; Why apple shoots grow rapidly and tulip shoots grow slowly

    NARCIS (Netherlands)

    Klerk, de G.J.M.

    2015-01-01

    Tulip growth in vitro is seriously impaired by inferior transport in the shoots. As a result, tulip cannot be micropropagated commercially using conventional means. In contrast, apple shoots show high transport and are easily micropropagated.

  11. Influence of growing and exploatation of bovins on regional agroecosystems

    OpenAIRE

    Cornel Podar; Ioan Oroian; Friss Zsuzsa; Bianca Damian; I. Macarie; Daniela Ţerbea; Pop, Ioan A

    2011-01-01

    Scientists all over the are concerned regarding the influence of growing ruminants on regional agro-ecosystems due to green house gases resulted (CO 2, CH4, N2O5). Cattle have contributed to environmental pollution in old industrial farming systems, when the cattle number in Romania, reached 8 million, manure evacuation was not solved and manure was accumulating around the farm polluting the soil, water and air. Low density of ruminants existing in the agricultural sector of the country is no...

  12. Growing the Blockchain information infrastructure

    DEFF Research Database (Denmark)

    Jabbar, Karim; Bjørn, Pernille

    2017-01-01

    In this paper, we present ethnographic data that unpacks the everyday work of some of the many infrastructuring agents who contribute to creating, sustaining and growing the Blockchain information infrastructure. We argue that this infrastructuring work takes the form of entrepreneurial actions......, which are self-initiated and primarily directed at sustaining or increasing the initiator’s stake in the emerging information infrastructure. These entrepreneurial actions wrestle against the affordances of the installed base of the Blockchain infrastructure, and take the shape of engaging...... or circumventing activities. These activities purposefully aim at either influencing or working around the enablers and constraints afforded by the Blockchain information infrastructure, as its installed base is gaining inertia. This study contributes to our understanding of the purpose of infrastructuring, seen...

  13. Growing Vertical in the Flatland.

    Science.gov (United States)

    Robinson, Joshua A

    2016-01-26

    The world of two-dimensional (2D) heterostructures continues to expand at a rate much greater than anyone could have predicted 10 years ago, but if we are to make the leap from science to technology, many materials challenges must still be overcome. Recent advances, such as those by Liu et al. in this issue of ACS Nano, demonstrate that it is possible to grow rotationally commensurate 2D heterostructures, which could pave the way toward single crystal van der Waals solids. In this Perspective, I provide some insight into a few of the challenges associated with growth of heterostructures, and discuss some of the recent works that help us better understand synthetic realization of 2D heterostructures.

  14. Viking Disruptions or Growing Integration?

    DEFF Research Database (Denmark)

    Sindbæk, Søren Michael

    2012-01-01

    Long-distance communication has emerged as a particular focus for archaeological exploration using network theory, analysis, and modelling. Initial attempts to adapt methods from social network analysis to archaeological data have, however, struggled to produce decisive results. This paper...... demonstrates how formal network analysis can be combined with a contextual reading of evidence relating to a long-distance communication network in the past. A study of the combined distributions of ten vessel types in 152 settlement sites from the 10th century suggests the outline of the core structure...... of the network. The model implies that 10th century long-distance exchange in the North Sea region featured long-distance links equal to those of the Carolingian emporia trade, and represented a growth in terms of new axes of integration, above all the growing links between the Scandinavian Peninsula...

  15. Growing bubbles rising in line

    Directory of Open Access Journals (Sweden)

    John F. Harper

    2001-01-01

    Full Text Available Over many years the author and others have given theories for bubbles rising in line in a liquid. Theory has usually suggested that the bubbles will tend towards a stable distance apart, but experiments have often showed them pairing off and sometimes coalescing. However, existing theory seems not to deal adequately with the case of bubbles growing as they rise, which they do if the liquid is boiling, or is a supersaturated solution of a gas, or simply because the pressure decreases with height. That omission is now addressed, for spherical bubbles rising at high Reynolds numbers. As the flow is then nearly irrotational, Lagrange's equations can be used with Rayleigh's dissipation function. The theory also works for bubbles shrinking as they rise because they dissolve.

  16. Morphogenesis of Growing Soft Tissues

    Science.gov (United States)

    Dervaux, Julien; Ben Amar, Martine

    2008-08-01

    Recently, much attention has been given to a noteworthy property of some soft tissues: their ability to grow. Many attempts have been made to model this behavior in biology, chemistry, and physics. Using the theory of finite elasticity, Rodriguez has postulated a multiplicative decomposition of the geometric deformation gradient into a growth-induced part and an elastic one needed to ensure compatibility of the body. In order to fully explore the consequences of this hypothesis, the equations describing thin elastic objects under finite growth are derived. Under appropriate scaling assumptions for the growth rates, the proposed model is of the Föppl von Kármán type. As an illustration, the circumferential growth of a free hyperelastic disk is studied.

  17. Meeting growing urban water needs through water reclamation and reuse

    Energy Technology Data Exchange (ETDEWEB)

    Okun, D.A. [Univ. of North Carolina, Chapel Hill, NC (United States)

    1994-12-31

    The subject of this presentation is the crisis in water management that results from exploding urban population growth. The world population is growing at a rate of almost 100 million per year, with urban growth being most of that. The problems of providing water and controlling pollution grow exponentially as population grows. Sources of water need to be larger and are inevitably more distant and more costly, if available. In urban areas, with attendant commercial and industrial enterprises, the concentrated heavy loads of pollutants seriously overburden receiving waters. Fish is often destroyed, with the loss of both essential food and employment, to say nothing of the impact of urban pollution on downstream water supplies.

  18. ' CONSTRUCTION INDUSTRY

    African Journals Online (AJOL)

    CONSTRUCTION INDUSTRY. N. Aniekwu. Civil Engineering Department,. University of Benin,. Benin City. Nigeria. ABSTRACT. This paper deals with safety in the Nigerian construction industry. Three aspects of safety were identified as paramount in the study and include accident causations, accident prevention and the.

  19. Impact of growing income inequality on sustainable development in China: a provincial-level analysis

    NARCIS (Netherlands)

    Heerink, N.B.M.; Ma, J.

    2006-01-01

    A growing body of literature has documented the rapidly increasing income disparities that accompanied China's economic growth in the 1980s and 1990s, and the driving factors behind this. Growing income inequality in its turn may have important implications for the accumulation of physical capital,

  20. Industry honoured

    CERN Multimedia

    2008-01-01

    CERN has organised a day to thank industry for its exceptional contributions to the LHC project. Lucio Rossi addresses CERN’s industrial partners in the Main Auditorium.The LHC inauguration provided an opportunity for CERN to thank all those who have contributed to transforming this technological dream into reality. Industry has been a major player in this adventure. Over the last decade it has lent its support to CERN’s teams and participating institutes in developing, building and assembling the machine, its experiments and the computing infrastructure. CERN involved its industrial partners in the LHC inauguration by organising a special industry prize-giving day on 20 October. Over 70 firms accepted the invitation. The firms not only made fundamental contributions to the project, but some have also supported LHC events in 2008 and the inauguration ceremony through generous donations, which have been coordinated by Carmen Dell’Erba, who is responsible for secu...

  1. Industrial garnet

    Science.gov (United States)

    Olson, D.W.

    2000-01-01

    The state of the global industrial garnet industry in 1999 is discussed. Industrial garnet mined in the U.S., which accounts for approximately one-third of the world's total, is usually a solid-solution of almandine and pyrope. The U.S. is the largest consumer of industrial garnet, using an estimated 47,800 st in 1999 as an abrasive and as a filtration medium in the petroleum industry, filtration plants, aircraft and motor vehicle manufacture, shipbuilding, wood furniture finishing operations, electronic component manufacture, ceramics manufacture, and glass production. Prices for crude concentrates ranged from approximately $50 to $110/st and refined garnet from $50 to $215/st in 1999, depending on type, source, quantity purchased, quality, and application.

  2. [Myopia, a growing health problem].

    Science.gov (United States)

    Tideman, J W L; Polling, J R; van der Schans, A; Verhoeven, V J M; Klaver, C C W

    2016-01-01

    - Myopia is the eye disorder with the most rapid increase in prevalence worldwide. It develops in childhood, with a peak incidence between the ages of 13 to 15 years. - Especially high myopia, i.e. a refractive error of -6 diopters or more, increases the risk of permanent visual impairment during adulthood due to structural abnormalities of the retina and optic nerve.- The cause of myopia is complex. Lifestyle factors in childhood, such as limited time spent outdoors and close work - such as reading and smartphone usage - are risk factors. Furthermore, genetic studies have revealed more than 100 factors associated with the development of myopia. - Pharmacological and optical interventions to inhibit myopia progression are increasingly applied. The use of atropine eye drops in children and has shown to be an effective treatment.

  3. Infection Dynamics on Growing Networks

    Science.gov (United States)

    Lai, Ying-Cheng; Liu, Zonghua; Ye, Nong

    We consider the entire spectrum of architectures for large, growing, and complex networks, ranging from being heterogeneous (scale-free) to homogeneous (random or small-world), and investigate the infection dynamics by using a realistic three-state epidemiological model. In this framework, a node can be in one of the three states: susceptible (S), infected (I), or refractory (R), and the populations in the three groups are approximately described by a set of nonlinear differential equations. Our heuristic analysis predicts that, (1) regardless of the network architecture, there exists a substantial fraction of nodes that can never be infected, and (2) heterogeneous networks are relatively more robust against spread of infection as compared with homogeneous networks. These are confirmed numerically. We have also considered the problem of deliberate immunization for preventing wide spread of infection, with the result that targeted immunization can be quite effective for heterogeneous networks. We believe these results are important for a host of problems in many areas of natural science and engineering, and in social sciences as well.

  4. Growing plants on atoll soils

    Energy Technology Data Exchange (ETDEWEB)

    Stone, E L; Migvar, L; Robison, W L

    2000-02-16

    Many years ago people living on atolls depended entirely on foods gathered from the sea and reefs and grown on land. Only a few plants, such as coconut (ni), Pandanus (bob), and arrowroot (mok-mok), could be grown on the lower rainfall atolls, although adequate groundwater conditions also allowed taro (iaraj, kotak, wot) to be cultivated. On higher rainfall atolls, breadfruit (ma) was a major food source, and banana (binana, kepran), lime (laim), and taros (iaraj, kotak, wot) could be grown. The early atoll populations were experts in growing plants that were vital to sustaining their nutrition requirements and to providing materials for thatch, basketry, cordage, canoe construction, flowers, and medicine. They knew which varieties of food plants grew well or poorly on their atolls, how to propagate them, and where on their atoll they grew best. They knew the uses of most native plants and what the various woods were well suited for. Many varieties of Pandanus (bob) and breadfruit (ma) grew well with high rainfall, but only a few produced well on drier atolls. Such information had been passed down through the generations although some of it has been lost in the last century. Today there are new plants and new varieties of existing plants that can be grown on atolls. There are also new materials and information on how to grow both the old and new plants more effectively. However, there are also introduced weeds and pests to control. Today, there is also an acute need to grow more of the useful plants adapted to atolls. Increasing numbers of people living on an atoll without an equal increase in income or food production stretches the available food supplies. Much has been written about the poor conditions for plant growth on atolls. As compared with many places in the world where crops are grown, however, atolls can provide some highly favorable conditions. For instance, the driving force for plant growth is sunlight, and on atolls light is abundant throughout the

  5. Case grows for climate change

    Energy Technology Data Exchange (ETDEWEB)

    Hileman, B.

    1999-08-09

    In the four years since the IPCC stated that 'the balance of evidence suggests a discernible human influence on global climate', evidence for anomalous warming has become more compelling, and as a result scientists have become more concerned that human-induced climate change has already arrived. The article summarises recent extra evidence on global temperatures, carbon dioxide measurements, ice shelf breakup, coral bleaching, unstable climates and improved climate models. At the time of the Kyoto conference, the US became keen on the idea that enhancing forest and soil carbon sequestration was a good way to offset emissions reduction targets. Congress is however under the opinion on that the Kyoto protocol presents a threat to the US economy, and senate is very unlikely to ratify the protocol during the Clinton Administration. The debate as to whether the US government should mandate major emission reduction or wait for more scientific certainty may continue for a number of years, but, growing concern of scientists and the public for the harmful effects of climate change may cause a change. 4 figs., 8 photos.

  6. Growing and evolving soft robots.

    Science.gov (United States)

    Rieffel, John; Knox, Davis; Smith, Schuyler; Trimmer, Barry

    2014-01-01

    Completely soft and flexible robots offer to revolutionize fields ranging from search and rescue to endoscopic surgery. One of the outstanding challenges in this burgeoning field is the chicken-and-egg problem of body-brain design: Development of locomotion requires the preexistence of a locomotion-capable body, and development of a location-capable body requires the preexistence of a locomotive gait. This problem is compounded by the high degree of coupling between the material properties of a soft body (such as stiffness or damping coefficients) and the effectiveness of a gait. This article synthesizes four years of research into soft robotics, in particular describing three approaches to the co-discovery of soft robot morphology and control. In the first, muscle placement and firing patterns are coevolved for a fixed body shape with fixed material properties. In the second, the material properties of a simulated soft body coevolve alongside locomotive gaits, with body shape and muscle placement fixed. In the third, a developmental encoding is used to scalably grow elaborate soft body shapes from a small seed structure. Considerations of the simulation time and the challenges of physically implementing soft robots in the real world are discussed.

  7. Pediatric Ovarian Growing Teratoma Syndrome

    Directory of Open Access Journals (Sweden)

    Rebecca M. Rentea

    2017-01-01

    Full Text Available Ovarian immature teratoma is a germ cell tumor that comprises less than 1% of ovarian cancers and is treated with surgical debulking and chemotherapy depending on stage. Growing teratoma syndrome (GTS is the phenomenon of the growth of mature teratoma elements with normal tumor markers during or following chemotherapy for treatment of a malignant germ cell tumor. These tumors are associated with significant morbidity and mortality due to invasive and compressive growth as well as potential for malignant transformation. Current treatment modality is surgical resection. We discuss a 12-year-old female who presented following resection of a pure ovarian immature teratoma (grade 3, FIGO stage IIIC. Following chemotherapy and resection of a pelvic/liver recurrence demonstrating mature teratoma, she underwent molecular genetics based chemotherapeutic treatment. No standardized management protocol has been established for the treatment of GTS. The effect of chemotherapeutic agents for decreasing the volume of and prevention of expansion is unknown. We review in detail the history, diagnostic algorithm, and previous reported pediatric cases as well as treatment options for pediatric patients with GTS.

  8. [Growing old differently: Transdisciplinary perspective].

    Science.gov (United States)

    Zimmermann, H-P

    2015-04-01

    Growing old differently: the phrase is intended to call something other to mind than merely the fact that images and forms of old age and aging have multiplied and diversified to an enormous extent. The suggestion put forward here is that otherness (as opposed to mere differences) should be positively reinforced. In other words, it is not just a matter of noting different forms of old age and aging but more than this, of seeking out opportunities for aging differently. In order to explore this, the article follows an older strand of theory, which has recently come to be frequently quoted in gerontology: the phenomenology of difference as reasoned analytically by Lévinas and Sartre and applied to gerontology by Améry and de Beauvoir. Here, opportunities for aging crucially depend on the way we look at it, how we observe and describe it and not least, how gerontology frames it. A distinction is made between two perspectives and their associated consequences for old age: alienation and alterity. Alienation means looking at old age above all as a disconcerting "other", as a perplexing, problematic deviation from the norm of vitality. Alterity, by contrast, refers to different options for living life in old age: options to be explored and opened up in contradistinction to cultural or academic alienation. Not least, the article appeals for diversity in scholarly approaches and for cross-disciplinary perspectives.

  9. China Electric Power Industry Forum draws industry leaders to Shenzen

    Energy Technology Data Exchange (ETDEWEB)

    Chambers, A.

    1995-07-01

    The second `China electric power industry forum` focused on the nation`s growing electric power generation industry, surveying both the present and future profiles of the local electrical industries. The article reports some projects under development such as the Three Gorges project to harness the power of the Yangtze River, the development of circulating fluidized bed technology (by AES China) and the growing use of gas turbine units. Pumped-storage hydropower stations are being built to complement other power generation sources at peak times. Plans for construction of power plants between now and 2020 are outlined. One of several new national research centers, the Electric Power Automation Research Center (EPARC) will undertaken research and testing of complex processes in power systems. 2 figs., 1 photo.

  10. Forestry friendship : integrated land management gains growing support

    Energy Technology Data Exchange (ETDEWEB)

    Lorenz, A.W.

    2007-06-15

    This article addressed the small but growing number of responsible stewards of the planet who advocate a coordinated approach to industrial growth in Alberta, with particular focus on integrated land management between oil sand mining and the forestry sector. Although Canada's oil sand resource provides the United States and Canada with a secure, long-term source of oil, Alberta's northern boreal forest has been permanently changed in the process of mining and producing this resource. Integrated land management refers to a new awareness that acting in isolation often results in negative implications for other users of the land and their resource values. It was suggested that companies can effectively reduce their cumulative impact on the environment through cooperation. A computer model was developed at the Department of Biological Sciences at the University of Alberta to calculate the cumulative effects of future industrial development. A landscape cumulative effects simulator (ALCES) makes use of a massive relational database to demonstrate how the overlay of individual types of industrial development will affect a defined area. With ALCES, the computer displays a series of maps showing the effects of industrial footprint and population growth in successive 10-year segments. It was shown that oilsands mining has changed nearly 70,000 hectares of northeast Alberta, with a series of roads, pipelines, industrial buildings and seismic lines. A customized scenario was used by ALCES in which bitumen production was assumed to increase to 2.5 million barrels per day. The model result showed that by 2100, the size of the area affected by oil sand mining pits, disposal sites, tailing ponds, and end-pit lakes will grow to between 180,000 and 250,000 hectares. The benefits of coordinated planning between competitive oil companies working in the area that stretches from Fort McMurray to the Cold Lake area were showcased by the Alberta-Pacific Forestry Industries. 2

  11. Which factor dominates the industry evolution? A synergy analysis based on China's ICT industry

    CERN Document Server

    Li, Yaya; Zhao, Yulin; Wang, Fang

    2014-01-01

    Industry evolution caused by various reasons, among which technology progress driving industry development has been approved, but with the new trend of industry convergence, inter-industry convergence also plays an increasing important role. This paper plans to probe the industry synergetic evolution mechanism based on industry convergence and technology progress. Firstly, we use self-organization method and Haken Model to establish synergetic evolution equations, select technology progress and industry convergence as the key variables of industry evolution system; then use patent licensing data of china's listed ICT companies to measure industry convergence rate and apply DEA Malmquist index method to calculate technology progress level; furthermore apply simultaneous equation estimation method to investigate the synergetic industry evolution process. From 2002 to 2012, China's ICT industry develops rapidly; it has the most obvious convergence and powerful technology progress compared with other industries. ...

  12. Menopausal women's positive experience of growing older

    DEFF Research Database (Denmark)

    Hvas, Lotte

    2006-01-01

    This paper aims to describe menopausal women's positive experience of growing older and becoming middle-aged.......This paper aims to describe menopausal women's positive experience of growing older and becoming middle-aged....

  13. Bariatric amputee: A growing problem?

    Science.gov (United States)

    Kulkarni, Jai; Hannett, Dominic P; Purcell, Steven

    2015-06-01

    This study reviewed prevalence of patients with lower limb amputations with above normal weight profile, with body mass index over 25, in seven disablement services centres managing their amputee rehabilitation in the United Kingdom. To review two clinical standards of practice in amputee rehabilitation. Ambulant lower limb amputees should have their body weight recorded on an electronic information system, with identification of cohort with body weight >100 kg. Lower limb amputees to be provided with suitable weight-rated prosthesis. Observational study of clinical practice. Data were collected from the Clinical Information Management Systems. Inclusion criteria--subjects were ambulant prosthetic users with some prosthetic intervention in the last 5 years and had at least one lower limb amputation. In 96% of patients, the weight record profile was maintained. In addition, 86% were under 100 kg, which is the most common weight limit of prosthetic componentry. Of 15,204 amputation levels, there were 1830 transfemoral and transtibial sites in users with body weight over 100 kg. In 60 cases, the prosthetic limb build was rated to be below the user body weight. In 96% of our patients, body weight was documented, and in 97%, the prosthetic limb builds were within stated body weight limits, but this may not be the case in all the other disablement services centres in the United Kingdom. Also, the incidence of obesity in the United Kingdom is a growing problem, and the health issues associated with obesity are further compounded in the amputee population. Prosthetic componentry has distinct weight limits which must be considered during prescription. As people with amputation approach the limits of specific components, clinicians are faced with the challenge of continued provision in a safe and suitable manner. This article reviews the amputee population and the current national profile to consider trends in provision and the incidence of these challenges. © The

  14. Industrial pioneers

    NARCIS (Netherlands)

    Wassink, J.

    2014-01-01

    With their knowledge of metallurgy, mechanics and thermodynamics, mechanical engineers had to give shape to the industrial revolution in the Netherlands 150 years ago. This revolution only slowly gathered momentum, however, especially in comparison with England.

  15. Industrial Lubricants

    Science.gov (United States)

    Kajdas, C.; Karpińska, A.; Kulczycki, A.

    'Industrial lubricant' gaseous, liquid and solid products cover many applications. A new systems analysis approach is used combining heterogeneous catalysis and tribochemistry. Bearing lubricant applications are discussed in terms of the bearing film thickness and tribological regimes, for liquid and solid lubricants. Compressor and vacuum pump lubricant applications are described. The various classes of hydraulic fluids for industrial applications are explained. The properties, applications and selection of various industrial lubricants for different gears are described. Steam and industrial gas turbine lubricant formulations are discussed and the effects of their degradation products, particularly for valves and filters, are presented. Metalworking lubricant applications are divided into cutting and forming operations and their actions are described. Speciality applications such as process, textile, food-grade, slideway, cylinder and wire rope lubricants are explained.

  16. MANAGING RAPID DIFFUSION: THE CASE OF CELLULAR COMMUNICATIONS IN SOUTH AFRICA

    Directory of Open Access Journals (Sweden)

    A.J. Buys

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: TSouth Africa has experienced extraordinarily rapid growth in the cellular communications industry, with subscriber numbers growing from zero to 5,3 million in the first six years since its introduction in 1994. Research was conducted to investigate the way in which the industry managed this rapid diffusion. The study highlighted the way in which the diffusion of cellular communication was managed, particularly through networks and linkages between hardware suppliers, network operators and service providers. The study has found that industry cooperation is the most important factor that drives rapid diffusion of new technology in a non-integrated industry such as the cellular communications industry in South Africa. The findings of this single-case study support propositions based on the innovation network theory.

    AFRIKAANSE OPSOMMING: Suid-Afrika het buitengewoon vinnige groei in die sellulêre kommunikasiebedryf ervaar, en intekenaarsyfers het van nul tot 5,3 miljoen in die eerste ses jaar sedert die bekendstelling daarvan in 1994 opgeskiet. Navorsing om vas te stel op watter wyse die bedryf hierdie snelle verspreiding bestuur het is, gedoen. Die studie het gekonsentreer op die manier waarop die verspreiding van sellulêre kommunikasie bestuur is, veral deur middel van netwerke en skakeling tussen apparatuurverskaffers, netwerkoperateurs en diensverskaffers. Die studie het bevind dat industriesamewerking die belangrikste faktor is wat vinnige verspreiding van nuwe tegnologie dryf in ʼn nie-geintegreerde nywerheid soos die sellulêre kommunikasiebedryf in Suid-Afrika. Die bevindinge van hierdie enkel-gevalstudie ondersteun proposisies gebaseer op die innovasie-netwerkteorie.

  17. Organising South African industry-university partnership ...

    African Journals Online (AJOL)

    South Africa experiences a great need for science, engineering and technology skills. As a counter strategy to the growing skills need local government, industries and universities have entered Industry-University Partnership Programme (IUPP) agreements following the example of international counterparts. Currently a ...

  18. Telecommunication Industry Development Prospects Based on Innovations

    Directory of Open Access Journals (Sweden)

    Dmitriy S. Ageenko

    2012-05-01

    Full Text Available Telecommunication industry is one of the fastest growing industries. Telecommunications development is one of the major indicators of sustainable development of both states and the entire world economy. Any branch of the world economy (banking, transport, tourism, etc. depends on the speed and reliability of global telecommunications. Telecommunication technologies enable to create new markets and provide new services.

  19. Economic aspects of triticale growing: Australian farmer experience.

    Science.gov (United States)

    Cooper, Katharine V; Elleway, Michael G

    2014-01-01

    Australian farmers grow triticale for economic benefit. A range of farmers in different localities, with different farm size, soil type, rainfall and proximity to markets, were asked why they grew triticale and how it contributed to their farm economics. The main encouragements to grow triticale relate to its agronomic prowess: its reliability and magnitude of production on all soil types and particularly in conditions in which other crops are relatively poor producers. Also in favour of triticale is its ability to produce economic return following a high yielding wheat crop, whilst providing soil benefits as a rotation crop reducing root and stubble diseases. Triticale's versatility and utility as high grade animal feed, by supplying grazing, fodder for conservation, and grain for on-farm animal production, further encourages farmers to include triticale in their cropping programs. The main inhibitor to growing triticale relates to the cost and ease of marketing the product, relative to other crops, and even triticale enthusiasts do not persist with triticale, if the economics are not in its favour. A downturn in the dairy industry, and the cessation of triticale grain receivals at bulk handling sites has resulted in a contraction of triticale production in some regions. Less triticale is likely to be grown where farmers have to provide their own storage, find their own markets, freight the product further, or have limited market options. New specific markets, such as high grade hay from reduced-awn triticale varieties, for the horse industry, may increase the profitability of triticale producing enterprises.

  20. Manpower development for the biomedical industry space.

    Science.gov (United States)

    Goh, James C H

    2013-01-01

    The Biomedical Sciences (BMS) Cluster is one of four key pillars of the Singapore economy. The Singapore Government has injected research funding for basic and translational research to attract companies to carry out their commercial R&D activities. To further intensify the R&D efforts, the National Research Foundation (NRF) was set up to coordinate the research activities of different agencies within the larger national framework and to fund strategic R&D initiatives. In recent years, funding agencies began to focus on support of translational and clinical research, particularly those with potential for commercialization. Translational research is beginning to have traction, in particular research funding for the development of innovation medical devices. Therefore, the Biomedical Sciences sector is projected to grow which means that there is a need to invest in human capital development to achieve sustainable growth. In support of this, education and training programs to strengthen the manpower capabilities for the Biomedical Sciences industry have been developed. In recent years, undergraduate and graduate degree courses in biomedical engineering/bioengineering have been developing at a rapid rate. The goal is to train students with skills to understand complex issues of biomedicine and to develop and implement of advanced technological applications to these problems. There are a variety of career opportunities open to graduates in biomedical engineering, however regardless of the type of career choices, students must not only focus on achieving good grades. They have to develop their marketability to employers through internships, overseas exchange programs, and involvement in leadership-type activities. Furthermore, curriculum has to be developed with biomedical innovation in mind and ensure relevance to the industry. The objective of this paper is to present the NUS Bioengineering undergraduate program in relation to manpower development for the biomedical

  1. Industrial diamond

    Science.gov (United States)

    Olson, D.W.

    2013-01-01

    Estimated 2012 world production of natural and synthetic industrial diamond was about 4.45 billion carats. During 2012, natural industrial diamonds were produced in at least 20 countries, and synthetic industrial diamond was produced in at least 12 countries. About 99 percent of the combined natural and synthetic global output was produced in Belarus, China, Ireland, Japan, Russia, South Africa and the United States. During 2012, China was the world’s leading producer of synthetic industrial diamond followed by the United States and Russia. In 2012, the two U.S. synthetic producers, one in Pennsylvania and the other in Ohio, had an estimated output of 103 million carats, valued at about $70.6 million. This was an estimated 43.7 million carats of synthetic diamond bort, grit, and dust and powder with a value of $14.5 million combined with an estimated 59.7 million carats of synthetic diamond stone with a value of $56.1 million. Also in 2012, nine U.S. firms manufactured polycrystalline diamond (PCD) from synthetic diamond grit and powder. The United States government does not collect or maintain data for either domestic PCD producers or domestic chemical vapor deposition (CVD) diamond producers for quantity or value of annual production. Current trade and consumption quantity data are not available for PCD or for CVD diamond. For these reasons, PCD and CVD diamond are not included in the industrial diamond quantitative data reported here.

  2. PD0332991 (palbociclib) for treatment of pediatric intracranial growing teratoma syndrome.

    Science.gov (United States)

    Schultz, Kris Ann P; Petronio, Joseph; Bendel, Anne; Patterson, Richard; Vaughn, David J

    2015-06-01

    Growing teratoma syndrome is characterized by growth of mature teratoma elements of a mixed germ cell tumor despite resolution of immature/malignant elements with administration of chemotherapy. Surgical resection is the only known cure for growing teratoma syndrome but in the brain, complete resection may be impossible. In these instances, mature teratoma, although histologically benign, may be fatal. In this report, we present the case of a child with a large, rapidly growing, unresectable pineal region growing teratoma. PD0332991 was administered with stabilization of the solid, enhancing components of the mass. Minimal adverse effects were noted. © 2014 Wiley Periodicals, Inc.

  3. The industrialization of clinical research.

    Science.gov (United States)

    Rettig, R A

    2000-01-01

    Recent controversies over the protection of human subjects, payment of physicians for recruiting patients to clinical trials, Food and Drug Administration (FDA) removal of approved drugs from the market, and reporting of results of clinical trials have highlighted important facets of clinical research. Less visible has been the industrialization of clinical research, and especially of clinical trials, that is, its emergence as a "line of business" of substantial magnitude and rapid growth. The growth of drug-industry outsourcing of clinical trials and the concomitant rise of a contract research industry are described in this paper, which argues for greater transparency in the conduct of both publicly and privately sponsored clinical trials.

  4. Industry Matters

    DEFF Research Database (Denmark)

    Tran, Angie Ngoc; Jeppesen, Søren

    2018-01-01

    regulation and greater industry pressure with regard to quality and safety of products than to labour standards in both sectors. Most factories in the TGF sector assembled products for global supply chains and were under pressure by industry norms, while most companies in the FBP sector produced......This chapter draws on a study investigating what corporate social responsibility (CSR) means to Vietnam’s small- and medium-size enterprise (SME) owner/managers and workers, using Scott’s three-pillar (norms, regulation, cognition) institutional framework. The findings are based on factory visits...... for the domestic market and were subjected to greater state regulation. Moreover, contributing critical perspectives to Scott’s framework, we found an overlap between the normative and the regulatory, and between the cognitive and the industry norms, which reveals how institutional and cultural pressures...

  5. Industrious Landscaping

    DEFF Research Database (Denmark)

    Brichet, Nathalia Sofie; Hastrup, Frida

    2018-01-01

    This article offers a history of landscaping at Søby brown coal beds – a former mining site in western Denmark. Exploring this industrial landscape through a series of projects that have made different natural resources appear, we argue that what is even recognized as resources shifts over time...... according to radically different and unpredictable agendas. Natural resources emerge as feats of particular political and historical landscape configurations, rather than fixed dormant sediments waiting to be exploited. This indicates that the Søby landscape is fundamentally volatile, as its resourcefulness...... has been seen interchangeably to rest with brown coal business, inexpensive estates for do-it-yourself people, pasture for grazing, and recreational forest, among other things. We discuss these rifts in landscaping, motivated by what we refer to as industriousness, to show that in an industrial site...

  6. Fiabilidad industrial

    OpenAIRE

    Griful Ponsati, Eulàlia

    2001-01-01

    El presente libro ha sido escrito y editado para los estudios de segundo ciclo de Ingeniería de Organización Industrial que se imparten en la ETSEIT de la UPC. La materia de fiabilidad que se imparte en este texto es una introducción a las técnicas estadísticas para resolver cuestiones de fiabilidad industrial. Se estudian distintos modelos probabilísticos del tiempo de vida y se presentan distintas formas de recabar información y de estimar, en cada caso, la fiabilidad de los componentes y s...

  7. Industrious Landscaping

    DEFF Research Database (Denmark)

    Brichet, Nathalia Sofie; Hastrup, Frida

    2018-01-01

    has been seen interchangeably to rest with brown coal business, inexpensive estates for do-it-yourself people, pasture for grazing, and recreational forest, among other things. We discuss these rifts in landscaping, motivated by what we refer to as industriousness, to show that in an industrial site...... analysis of shifting landscape projects and has an essential methodological corollary, namely that fieldwork must be improvisational, situated, and humble. Rather than finding the ‘right’ field materials for a canonical landscape history of Søby, we develop a method of ‘dustballing’ – being blown here...

  8. Industrial Networks

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    the focus of operations management from managing the own organization to continuously developing and managing a network of external and internal resources forming a production system. This perspective may be called managing an “extraprise” rather than an “enterprise.” It should be noted that “an industrial...... network” should not be seen as an organizational form but as a perspective that can be used to enrich one's understanding of organizations. The industrial network perspective has three basic building blocks: actors, resources, and activities. The three building blocks and their relations constitute...

  9. Rapid Detection of the Varicella Zoster Virus

    Science.gov (United States)

    Lewis, Michelle P.; Harding, Robert

    2011-01-01

    1.Technology Description-Researchers discovered that when the Varicella Zoster Virus (VZV) reactivates from latency in the body, the virus is consistently present in saliva before the appearance of skin lesions. A small saliva sample is mixed with a specialized reagent in a test kit. If the virus is present in the saliva sample, the mixture turns a red color. The sensitivity and specificity emanates from an antibody-antigen reaction. This technology is a rapid, non-invasive, point of-of-care testing kit for detecting the virus from a saliva sample. The device is easy to use and can be used in clinics and in remote locations to quickly detect VZV and begin treatment with antiviral drugs. 2.Market Opportunity- RST Bioscience will be the first and only company to market a rapid, same day test kit for the detection of VZV in saliva. The RST detection test kit will have several advantages over existing, competitive technology. The test kit is self contained and laboratory equipment is not required for analysis of the sample. Only a single saliva sample is required to be taken instead of blood or cerebral spinal fluid. The test kit is portable, sterile and disposable after use. RST detection test kits require no electrical power or expensive storage equipment and can be used in remote locations. 3.Market Analysis- According to the CDC, it is estimated that 1 million cases of shingles occur each year in the U.S. with more than half over the age of sixty. There is a high demand for rapid diagnostics by the public. The point-of-care testing (POCT) market is growing faster than other segments of in vitro diagnostics. According to a July 2007 InteLab Corporation industry report the overall market for POCT was forecast to increase from $10.3 billion in 2005 to $18.7 billion by 2011. The market value of this test kit has not been determined. 4.Competition- The VZV vaccine prevents 50% of cases and reduces neuralgia by 66%. The most popular test detects VZV-specific IgM antibody

  10. 2008 Industrial Technologies Market Report, May 2009

    Energy Technology Data Exchange (ETDEWEB)

    Energetics; DOE

    2009-07-01

    The industrial sector is a critical component of the U.S. economy, providing an array of consumer, transportation, and national defense-related goods we rely on every day. Unlike many other economic sectors, however, the industrial sector must compete globally for raw materials, production, and sales. Though our homes, stores, hospitals, and vehicles are located within our borders, elements of our goods-producing industries could potentially be moved offshore. Keeping U.S. industry competitive is essential to maintaining and growing the U.S. economy. This report begins with an overview of trends in industrial sector energy use. The next section of the report focuses on some of the largest and most energy-intensive industrial subsectors. The report also highlights several emerging technologies that could transform key segments of industry. Finally, the report presents policies, incentives, and drivers that can influence the competitiveness of U.S. industrial firms.

  11. Recognition and rating of effecting indexes on consumption of different sites poplar wood production in Iran for paper making industries

    Directory of Open Access Journals (Sweden)

    ebrahim lashkarbolouki

    2016-12-01

    Full Text Available Considering the growth in population, the need for wood consumption also increases. The rapid progress of science and technology doubles the wood consumption. Supplying this need at a glance was focused on the forests. Forests for many reasons have faced decrease in production and this extreme need for wood, by planting fast growing trees (poplar, eucalypt, Paulownia … makes it possible. One of industries plenty of the wood is paper industry that needs to huge primary wood material. This industry can continue their production activities by using the wood of poplar. This research was found out with the aim of assessing the practical characteristics of poplar wood by nondestructive test method in paper production industry. Poplar sites were selected in areas of country that poplar trees were planted widely. For locating the production of different site in paper industry found out Analytic Hierarchy Process (AHP in Expert choice 11 software. For field studies of this research, the questionnaires were prepared and sent for expert and university professors with special expertise in this industry. The results showed that: Production of Pulp and paper industry: in this industry among of five main indexes influencing in pulp and paper production, fiber morphology trait recognized as first priority with weighting value (0.435. Production allocations with their weighting value are determined: Sari (0.240, Fouman (0.236, Lashtnasha (0.182, Abhar (0.174 and Zanjan (0.168, respectively.

  12. Use of non-growing Lactococcus lactis cell suspensions for production of volatile metabolites with direct relevance for flavour formation during dairy fermentations.

    Science.gov (United States)

    van de Bunt, Bert; Bron, Peter A; Sijtsma, Lolke; de Vos, Willem M; Hugenholtz, Jeroen

    2014-12-10

    Lactococcus lactis is a lactic acid bacterium that has been used for centuries in the production of a variety of cheeses, as these bacteria rapidly acidify milk and greatly contribute to the flavour of the fermentation end-products. After a short growth phase during cheese ripening L. lactis enters an extended non-growing state whilst still strongly contributing to amino acid-derived flavour formation. Here, a research approach is presented that allows investigation of strain- and amino acid-specific flavour formation during the non-growing state. Non-growing cells of five selected L. lactis strains were demonstrated to degrade amino acids into flavour compounds that are relevant in food fermentations and differs greatly from production of flavour compounds using growing cells. As observed earlier in other research set-ups and with other microorganisms, addition of NADH, α-ketoglutarate and pyridoxal-5-phosphate was demonstrated to be essential for optimal flavour formation, suggesting that intracellular pools of these substrates are too low for the significant production of the flavour compounds. Production of flavours during the non-growing phase strongly depends on the individual amino acids that were supplied, on the presence of other amino acids (mixtures versus single compounds), and on the strain used. Moreover, we observed that the plasmid-free model strains L. lactis MG1363 and IL1403 produce relatively low amounts of flavour components under the various conditions tested. By using this simplified and rapid approach to study flavour formation by non-growing lactic acid bacteria, lengthy ripening periods are no longer required to assess the capacity of strains to produce flavours in the long, non-growing state of dairy fermentation. In addition, this method also provides insight into the conversion of single amino acids versus the conversion of a mixture of amino acids as produced during protein degradation. The generated results are complementary to

  13. Rapid energy modeling for existing buildings: Testing the business and environmental potential through an experiment at Autodesk

    Energy Technology Data Exchange (ETDEWEB)

    Deodhar, Aniruddha; Stewart, Emma; Young, Rahul; Khan, Haider

    2010-09-15

    Retrofits of existing buildings represent a huge, growing market and an opportunity to achieve some of the most sizable and cost-effective carbon reductions in any sector of the economy. More 'zero energy' and 'carbon neutral' buildings are being conceived daily by combining energy efficiency measures with renewable energy technologies. However, for all the progress, the building industry faces technical and cost challenges in identifying the highest potential retrofit candidates. This presentation investigates one potential solution, a technology driven workflow called rapid energy modeling, to accelerate and scale the process of analyzing performance for existing buildings in prioritizing improvements.

  14. Towards Automatic Image Segmentation Using Optimised Region Growing Technique

    Science.gov (United States)

    Alazab, Mamoun; Islam, Mofakharul; Venkatraman, Sitalakshmi

    Image analysis is being adopted extensively in many applications such as digital forensics, medical treatment, industrial inspection, etc. primarily for diagnostic purposes. Hence, there is a growing interest among researches in developing new segmentation techniques to aid the diagnosis process. Manual segmentation of images is labour intensive, extremely time consuming and prone to human errors and hence an automated real-time technique is warranted in such applications. There is no universally applicable automated segmentation technique that will work for all images as the image segmentation is quite complex and unique depending upon the domain application. Hence, to fill the gap, this paper presents an efficient segmentation algorithm that can segment a digital image of interest into a more meaningful arrangement of regions and objects. Our algorithm combines region growing approach with optimised elimination of false boundaries to arrive at more meaningful segments automatically. We demonstrate this using X-ray teeth images that were taken for real-life dental diagnosis.

  15. Creative Industries

    Directory of Open Access Journals (Sweden)

    Montserrat Pareja-Eastaway

    2016-01-01

    Full Text Available This journal welcomes contributions exploring the intrinsic features of the field of creative industries and activities of entrepreneurs who use creativity as the basis of their work; analyses of literature concerning evolutionary developments in companies and their adaptations linked to the management of creativity; and, finally, reviews of books in cutting-edge research on the evolution of the creative enterprise.

  16. Fermentation Industry.

    Science.gov (United States)

    Grady, C. P. L., Jr.; Grady, J. K.

    1978-01-01

    Presents a literature review of wastes from the fermentation industry, covering publications of 1976-77. This review focuses on: (1) alcoholic beverage production; (2) pharmaceuticals and biochemicals production; and (3) biomass production. A list of 62 references is also presented. (HM)

  17. From new entries to retirement: The changing age composition of the U.S. male labor force by industry.

    Science.gov (United States)

    Jaffe, A J

    1967-03-01

    The process whereby the age composition of an industry is formed appears to be largely a function of past rates of growth in employment; the social (or institutional) framework sets limits and affects the ensuing age composition but relatively little. The following types will illustrate this process. 1. Consider an industry which has increased considerably more rapidly in employment over several decades than has the total labor force. The rapid growth brings in a disproportionately large share of youth who are first entering the labor market; other younger workers move from slowly growing (or declining) industries. These movements add many more younger workers. On the other hand, there is little, if any, unemployment in the industry so that there are few pressures being exerted on the older workers to retire, and relatively few will retire. Under these circumstances the age composition will be younger than tliat of the entire male working force. 2. Consider an industry which has grown slowly, if at all, for some time. There will be comparatively fewer (in comparison with the first example) new entries and less mobility from other industries. The men already engaged in this industry will continue to work there; they gradually become older and are not counterbalanced by increasing numbers of young workers. Unemployment is likely to be higher, leading to a higher retirement rate. There are also likely to be large numbers of men a decade or two under the retirement age-the heritage of an "ancient" period when the industry had experienced significant increases in employment; these add pressure on the older men and more retire. The age composition of such an industry gradually veers toward the older side; it is considerably older than that of the entire male working force. At any given moment of time most industries will reflect variable past growth rates. For example, one industry may have a very large proportion of young workers because it grew very rapidly in

  18. Current Status of Trace Metal Pollution in Soils Affected by Industrial Activities

    Directory of Open Access Journals (Sweden)

    Ehsanul Kabir

    2012-01-01

    Full Text Available There is a growing public concern over the potential accumulation of heavy metals in soil, owing to rapid industrial development. In an effort to describe the status of the pollutions of soil by industrial activities, relevant data sets reported by many studies were surveyed and reviewed. The results of our analysis indicate that soils were polluted most significantly by metals such as lead, zinc, copper, and cadmium. If the dominant species are evaluated by the highest mean concentration observed for different industry types, the results were grouped into Pb, Zn, Ni, Cu, Fe, and As in smelting and metal production industries, Mn and Cd in the textile industry, and Cr in the leather industry. In most cases, metal levels in the studied areas were found to exceed the common regulation guideline levels enforced by many countries. The geoaccumulation index (Igeo, calculated to estimate the enrichment of metal concentrations in soil, showed that the level of metal pollution in most surveyed areas is significant, especially for Pb and Cd. It is thus important to keep systematic and continuous monitoring of heavy metals and their derivatives to manage and suppress such pollution.

  19. Current Status of Trace Metal Pollution in Soils Affected by Industrial Activities

    Science.gov (United States)

    Kabir, Ehsanul; Ray, Sharmila; Kim, Ki-Hyun; Yoon, Hye-On; Jeon, Eui-Chan; Kim, Yoon Shin; Cho, Yong-Sung; Yun, Seong-Taek; Brown, Richard J. C.

    2012-01-01

    There is a growing public concern over the potential accumulation of heavy metals in soil, owing to rapid industrial development. In an effort to describe the status of the pollutions of soil by industrial activities, relevant data sets reported by many studies were surveyed and reviewed. The results of our analysis indicate that soils were polluted most significantly by metals such as lead, zinc, copper, and cadmium. If the dominant species are evaluated by the highest mean concentration observed for different industry types, the results were grouped into Pb, Zn, Ni, Cu, Fe, and As in smelting and metal production industries, Mn and Cd in the textile industry, and Cr in the leather industry. In most cases, metal levels in the studied areas were found to exceed the common regulation guideline levels enforced by many countries. The geoaccumulation index (I geo), calculated to estimate the enrichment of metal concentrations in soil, showed that the level of metal pollution in most surveyed areas is significant, especially for Pb and Cd. It is thus important to keep systematic and continuous monitoring of heavy metals and their derivatives to manage and suppress such pollution. PMID:22645468

  20. Influence of growing and exploatation of bovins on regional agroecosystems

    Directory of Open Access Journals (Sweden)

    Cornel Podar

    2011-12-01

    Full Text Available Scientists all over the are concerned regarding the influence of growing ruminants on regional agro-ecosystems due to green house gases resulted (CO 2, CH4, N2O5. Cattle have contributed to environmental pollution in old industrial farming systems, when the cattle number in Romania, reached 8 million, manure evacuation was not solved and manure was accumulating around the farm polluting the soil, water and air. Low density of ruminants existing in the agricultural sector of the country is not significant in terms of pollution. Currently cattle have positive effects on the environment by the use of legumes, grasses and manure production contributing to the increase of agricultural production: crop production (sugar beet, potato and cereals, animal production (milk, meat, leather production and industrial production also (biogas, befouls, alcohol, oil production.

  1. Growing a photonics program in good times and bad

    Science.gov (United States)

    Donnelly, Judith; Seebeck, Randall

    2003-10-01

    Three Rivers Community College (TRCC) is a public, associate degree-granting college located in southeastern Connecticut.. Formed in 1992 by the merger of Thames Valley State Technical College and Mohegan Community College, TRCC is a comprehensive multi-campus college with a full range of programs in technology and engineering technology. Although Connecticut is located in what has been called "Photonics Valley", stretching from Virginia to Massachusetts, eastern Connecticut has few optics related companies and is mainly known for two large Indian gaming casinos and the submarines built at General Dynamics Electric Boat Division in Groton. Yet TRCC has created a two-year associate degree program in Photonics Engineering Technology which continues to grow. This paper describes the development of a photonics technician program at a distance (in Connecticut terms) from supporting industries and explains strategies used to keep the program current with industry and student expectations.

  2. Major ion chemistry of shallow groundwater of a fast growing city of central India.

    Science.gov (United States)

    Marghade, Deepali; Malpe, D B; Zade, A B

    2012-04-01

    Nagpur City located in semiarid area of central India is a fast-growing industrial centre. In recent years, rapid development has created an increased demand for drinking water, which is increasingly being fulfilled by groundwater abstraction. The present study was undertaken to assess major ion chemistry of shallow groundwater to understand geochemical evolution of groundwater and water quality for promoting sustainable development and effective management of groundwater resources. A total of 47 water samples were collected from shallow aquifer of selected parts of the city and the water chemistry of various ions viz. Ca(2 +), Mg(2 +), Na(+), K(+), CO(3)(2-), HCO(3)(-), Cl(-), SO(4)(2-) and NO(3)(-) are carried out. The chemical relationships in Piper diagram identify Ca-HCO(3)-Cl and mixed Ca-Na-HCO(3)-Cl as most prevalent water types. Alkaline earth exceeds alkalis and weak acids exceed strong acids. Ionic ratios and Gibb's diagram suggest that silicate rock weathering and anthropogenic activities are the main processes that determine the ionic composition in the study area. The nitrate appeared as a major problem of safe drinking water in this region. We recorded highest nitrate concentration, i.e., 411 mg/l in one of the dug well. A comparison of groundwater quality in relation to drinking water quality standards revealed that about half of the shallow aquifer samples are not suitable for drinking.

  3. Industrial vision

    DEFF Research Database (Denmark)

    Knudsen, Ole

    1998-01-01

    This dissertation is concerned with the introduction of vision-based application s in the ship building industry. The industrial research project is divided into a natural seq uence of developments, from basic theoretical projective image generation via CAD and subpixel analysis to a description...... is present ed, and the variability of the parameters is examined and described. The concept of using CAD together with vision information is based on the fact that all items processed at OSS have an associated complete 3D CAD model that is accessible at all production states. This concept gives numerous...... possibilities for using vision in applications which otherwise would be very difficult to automate. The requirement for low tolerances in production is, despite the huge dimensions of the items involved, extreme. This fact makes great demands on the ability to do robust sub pixel estimation. A new method based...

  4. Biotechnology Industry

    Science.gov (United States)

    2007-01-01

    ACRONYM(S) 11. SPONSOR/MONITOR’S REPORT NUMBER(S) 12. DISTRIBUTION/AVAILABILITY STATEMENT Approved for public release ; distribution unlimited 13...to run research labs, bioreactors and manufacturing facilities affect all the companies involved. Aside from industry giants such as Monsanto or...chemical-based resources used in manufacturing processes (fuel, plastics and textiles ). The US is the world leader in GM crop production. In 2003 eleven

  5. Magnetically controlled growing rods for scoliosis surgery.

    Science.gov (United States)

    Metkar, Umesh; Kurra, Swamy; Quinzi, David; Albanese, Stephen; Lavelle, William F

    2017-02-01

    Early onset scoliosis can be both a disfiguring as well as a life threatening condition. When more conservative treatments fail, pediatric spinal surgeons are forced to consider operative interventions. Traditionally, these interventions have involved the insertion of a variety of implants into the patient with a limited number of anchor points controlling the spine. In the past, these pediatric patients have had multiple surgeries for elective lengthening of these devices to facilitate their growth while attempting to control the scoliosis. These patients often experience a physical and emotional toll from their multiple repeated surgeries. Growing spine techniques have also had a noted high complication rate due to implant dislodgement and infections. Recently, the development of non-invasively, self-lengthening growing rods has occurred. These devices have the potential to allow for the devices to be lengthened magnetically in a conscious patient in the surgeon's office. Areas covered: This review summarized previously published articles in the English literature using a key word search in PubMed for: 'magnetically controlled growing rods', 'Magec rods', 'magnetic growing rods' and 'growing rods'. Expert commentary: Magnetically controlled growing rods have an advantage over growing rods in lengthening the growing spine in the absence of repetitive surgeries.

  6. (GrOW) Frequently Asked Questions

    International Development Research Centre (IDRC) Digital Library (Canada)

    Alejandra

    How many applications will be shortlisted at the end of the first stage? GrOW envisages that up to 4 selected teams will be asked to submit a full research proposal for review and funding consideration. How is the review process conducted? Upon receiving complete applications, a review process begins by the GrOW team, ...

  7. Food industry and economic development in the Asia Pacific.

    Science.gov (United States)

    McKay, John

    2007-01-01

    The food industry in the Asia Pacific region is gigantic in size, and is therefore a key element in the economic development prospects for the region. It is estimated that in 2000, for example, total expenditure on food and beverages in China was worth $US 188.5 billion, second only to that in Japan at $322 billion. Yet it is clear that given the expansion of both populations and incomes in the region this market will expand rapidly over the next few years. Particularly important will be the continued growth of cities and of the share of employment in industrial and service activities. Much of this growth in food purchases will be supplied from local sources, but this will demand some fundamental changes in domestic food production systems. There will also be a substantial growth in the food trade, with ever increasing levels of national and regional specialisation. These developments will put increasing pressures on quality standards at all levels, with a growing emphasis on food safety, integrity, quality, and nutritional and health impacts. This paper reviews the current status of the food industry and the food trade in the region, and presents some projections for future developments. Particular emphasis is given to policy choices that must be made to ensure that the food system in the region develops in ways that are sustainable and most beneficial to the population as a whole.

  8. Growing wealth and growing pains: child and adolescent psychiatry in Hong Kong, Malaysia and Singapore.

    Science.gov (United States)

    Tan, Susan; Fung, Daniel; Hung, Se-Fong; Rey, Joseph

    2008-06-01

    Several Asian regions have undergone a dramatic transformation, some becoming very affluent. This paper aims to ascertain how countries that are becoming wealthy have dealt with child and adolescent mental health issues. Population health status, child and adolescent mental health services, child psychiatry training, the number of child psychiatrists and related matters were examined in Hong Kong, Malaysia and Singapore. Hong Kong, Malaysia and Singapore are ethnically, religiously, socially and politically very different. In spite of considerable wealth and a growing recognition that mental health problems in the young are increasing, they face similar problems--lack of access to treatment due to a dearth of services and a lack of child psychiatrists (2.5, 0.5 and 2.8 per million people, respectively). Because the number of child psychiatrists is so small, their ability to provide services, advocate, train, maintain a professional identity, and deal with future crises is very limited. Other rapidly developing countries can learn from this experience and should take action early to prevent a similar outcome.

  9. Bacterial removal of toxic phenols from an industrial effluent

    African Journals Online (AJOL)

    STORAGESEVER

    2008-07-04

    Jul 4, 2008 ... Bacterial removal of toxic phenols from an industrial effluent. J. Lin*, M. Reddy, ... Chlorinated phenols, widely used in industries, are of growing concern owing to their high toxicity, carcinogenicity and wide ..... biodegradation of phenolic compounds in industrial wastewater: Isolation and identification of ...

  10. Aeronautics Education, Research, and Industry Alliance (AERIAL) Progress Report and Proposal for Funding Continuation NASA Nebraska EPSCoR

    Science.gov (United States)

    Bowen, Brent; Fink, Mary; Gogos, George; Moussavi, Massoum; Nickerson, Jocelyn; Rundquist, Donald; Russell, Valerie; Tarry, Scott

    2004-01-01

    The Aeronautics Education, Research, and Industry Alliance (AERIAL), which began as a comprehensive, multi-faceted NASA EPSCoR 2000 initiative, has contributed substantially to the strategic research and technology priorities of NASA, while intensifying Nebraska's rapidly growing aeronautics research and development endeavors. AERIAL has enabled Nebraska researchers to: (a) continue strengthening their collaborative relationships with NASA Field Centers, Codes, and Enterprises; (b) increase the capacity of higher education throughout Nebraska to invigorate and expand aeronautics research; and (c) expedite the development of aeronautics-related research infrastructure and industry in the state. Nebraska has placed emphasis on successfully securing additional funds from non-EPSCoR and non-NASA sources. AERIAL researchers have aggressively pursued additional funding opportunities offered by NASA, industry, and other agencies. This report contains a summary of AERIAL's activities and accomplishments during its first three years of implementation.

  11. CURRENT TRENDS IN HOSPITALITY INDUSTRY

    OpenAIRE

    Ivica Batinić

    2013-01-01

    Hospitality industry is a complex product-service economic activity which besides accommodation, food and beverages offers a variety of complementary and ancillary services in order to meet modern needs, demands and desires of tourists consumers. Contemporary needs, demands and desires of tourists consumers (increased need for security and preservation of health; emphasis on ecology and healthy food; pure nature stay; growing demand for adventure activities and e...

  12. THE TOURISM INDUSTRY OF ETHICS AND TOURISM

    Directory of Open Access Journals (Sweden)

    Constanţa ENEA

    2007-01-01

    Full Text Available The tourism industry is one of the largest industries in the world, and despite recent events that have made its operating environment more complex, the industry continues to grow [Theobald, 2005, Global Tourism, 3rdedn., Butterworth-Heinemann/Elsevier]. Commensurate to the size of the industry is a growth in the number of students pursuing degree courses in tourism around the world. Despite an increasingly sophisticated literature, the relative recency of the industry and its study has meant little attention has been paid in the ethics literature to the dilemmas facing tourism managers and its students. Based on interviews with senior members of the tourism industry six scenarios are developed with pertinence to the challenges faced by industry practitioners today.

  13. The Managerial Process in the Media Industry

    Directory of Open Access Journals (Sweden)

    Andrei NICULESCU

    2011-06-01

    Full Text Available Managing an organisation from the media industry has a series of particularities that are the object of this analysis. The main functions of management are studied with the help of relevant examples and case studies taken from the specialized literature. For such a complex, dynamic and versatile industry such as media, with the electronic sector evolving perhaps more rapidly than in any other industry, the challenges facing managers are multiple.

  14. Microsatellite Primers for Fungus-Growing Ants

    DEFF Research Database (Denmark)

    Villesen Fredsted, Palle; Gertsch, Pia J.; Boomsma, Jacobus Jan (Koos)

    2002-01-01

    We isolated five polymorphic microsatellite loci from a library of two thousand recombinant clones of two fungus-growing ant species, Cyphomyrmex longiscapus and Trachymyrmex cf. zeteki. Amplification and heterozygosity were tested in five species of higher attine ants using both the newly...... developed primers and earlier published primers that were developed for fungus-growing ants. A total of 20 variable microsatellite loci, developed for six different species of fungus-growing ants, are now available for studying the population genetics and colony kin-structure of these ants....

  15. Microsatellite primers for fungus-growing ants

    DEFF Research Database (Denmark)

    Villesen, Palle; Gertsch, P J; Boomsma, JJ

    2002-01-01

    We isolated five polymorphic microsatellite loci from a library of two thousand recombinant clones of two fungus-growing ant species, Cyphomyrmex longiscapus and Trachymyrmex cf. zeteki. Amplification and heterozygosity were tested in five species of higher attine ants using both the newly...... developed primers and earlier published primers that were developed for fungus-growing ants. A total of 20 variable microsatellite loci, developed for six different species of fungus-growing ants, are now available for studying the population genetics and colony kin-structure of these ants....

  16. Ningxia update: Government policy and measures for promoting a sustainable wine industry

    Directory of Open Access Journals (Sweden)

    Hao Linhai

    2016-01-01

    Full Text Available The rapidly growing wine industry in the Ningxia region of north-central China had 35,300 ha of wine grapes and 184 registered wineries as of mid-2016. Ningxia's mission is to develop a sustainable wine industry based on small-scale producers and high-quality products in order to distinguish itself from other key regions in China. Government measures over the last two years have included diversifying grape varieties, encouraging vineyard mechanization, awarding cash to medalists in renown wine competitions, subsidizing international wine cooperation and education programs, and promoting local producers through Ningxia wine centers in major Chinese cities. These efforts have significantly improved wine quality, lowered costs and raised Ningxia's image as a region. The good reputation of Ningxia wine is now spreading from the trade to general consumers.

  17. Industrial wireless sensor networks applications, protocols, and standards

    CERN Document Server

    Güngör, V Çagri

    2013-01-01

    The collaborative nature of industrial wireless sensor networks (IWSNs) brings several advantages over traditional wired industrial monitoring and control systems, including self-organization, rapid deployment, flexibility, and inherent intelligent processing. In this regard, IWSNs play a vital role in creating more reliable, efficient, and productive industrial systems, thus improving companies' competitiveness in the marketplace. Industrial Wireless Sensor Networks: Applications, Protocols, and Standards examines the current state of the art in industrial wireless sensor networks and outline

  18. Industry X.0 : Reimaging industrial development

    CSIR Research Space (South Africa)

    Zachar, H

    2017-10-01

    Full Text Available This presentation discusses how Industry X.0 is steadily rising in importance to industry executives. A framework for Industry X.0, as well as several focus areas, are supplied....

  19. Industry X.0 : Reimaging industrial development.

    CSIR Research Space (South Africa)

    Zachar, H

    2017-10-01

    Full Text Available This presentation discusses how Industry X.0 is steadily rising in importance to industry executives. A framework for Industry X.0, as well as several focus areas, are supplied....

  20. Industrial accelerators and their applications

    CERN Document Server

    Hamm, Marianne E

    2012-01-01

    This unique new book is a comprehensive review of the many current industrial applications of particle accelerators, written by experts in each of these fields. Readers will gain a broad understanding of the principles of these applications, the extent to which they are employed, and the accelerator technology utilized. The book also serves as a thorough introduction to these fields for non-experts and laymen. Due to the increased interest in industrial applications, there is a growing interest among accelerator physicists and many other scientists worldwide in understanding how accelerators are used in various applications. The government agencies that fund scientific research with accelerators are also seeking more information on the many commercial applications that have been or can be developed with the technology developments they are funding. Many industries are also doing more research on how they can improve their products or processes using particle beams.

  1. EUROPAIRS: The European project on coupling of High Temperature Reactors with industrial processes

    Energy Technology Data Exchange (ETDEWEB)

    Angulo, C., E-mail: carmen.angulo@gdfsuez.com [Tractebel Engineering S.A. (GDF SUEZ), Avenue Ariane 7, 1200 Brussels (Belgium); Bogusch, E. [AREVA NP GmbH, Paul-Gossen-Strasse 100, 91052 Erlangen (Germany); Bredimas, A. [LGI Consulting, 37 rue de la Grange aux Belles, 75010 Paris (France); Delannay, N. [Tractebel Engineering S.A. (GDF SUEZ), Avenue Ariane 7, 1200 Brussels (Belgium); Viala, C. [AREVA NP SAS, 10 rue Juliette Recamier, 69456 Lyon Cedex 06 (France); Ruer, J.; Muguerra, Ph.; Sibaud, E. [SAIPEM S.A., 1/7 Avenue San Fernando, 78884 Saint Quentin en Yvelines Cedex (France); Chauvet, V. [LGI Consulting, 37 rue de la Grange aux Belles, 75010 Paris (France); Hittner, D. [AREVA NP Inc., 3315 Old Forest Road, Lynchburg, VA 24501 (United States); Fuetterer, M.A. [European Commission, Joint Research Centre, 1755ZG Petten (Netherlands); Groot, S. de [Nuclear Research and Consultancy Group, 1755ZG Petten (Netherlands); Lensa, W. von; Verfondern, K. [Forschungszentrum Juelich GmbH, Leo-Brandt-Strasse,52425 Juelich (Germany); Moron, R. [Solvay SA, rue du Prince Albert 33, 1050 Brussels (Belgium); Baudrand, O. [Institut de Radioprotection et de Surete Nucleaire (IRSN), BP 17, 92262 Fontenay-aux-Roses cedex (France); Griffay, G. [Arcelor Mittal Maizieres Research SA, rue Luigi Cherubini 1A5, 39200 Saint Denis (France); Baaten, A. [USG/Baaten Energy Consulting, Burgermeester-Ceulen-Straat 78, 6212CT Maastricht (Netherlands); Segurado-Gimenez, J. [Tractebel Engineering S.A. (GDF SUEZ), Avenue Ariane 7, 1200 Brussels (Belgium)

    2012-10-15

    Developers of High Temperature Reactors (HTR) worldwide acknowledge that the main asset for market breakthrough is its unique ability to address growing needs for industrial cogeneration of heat and power (CHP) owing to its high operating temperature and flexibility, adapted power level, modularity and robust safety features. A strong alliance between nuclear and process heat user industries is a necessity for developing such a nuclear system for the conventional process heat market, just as the electro-nuclear development required a close partnership with utilities. Initiating such an alliance is one of the objectives of the EUROPAIRS project ( (www.europairs.eu)) presently on-going in the frame of the Euratom 7th Framework Programme (FP7). Although small and of short duration (21 months), EUROPAIRS is of strategic importance: it generates the boundary conditions for rapid demonstration of collocating HTR with industrial processes as proposed by the European High Temperature Reactor Technology Network (HTR-TN). This paper presents the main goals, the organization and the working approach of EUROPAIRS. It also presents the status of the viability assessment studies for coupling HTR with industrial end-user systems as one of the main pillars of the project. The main goal of the viability assessment is to identify developments required to remove the last technological and licensing barriers for a viable coupling scheme. The study is expected to result in guidelines for directing the choice of an industrial scale prototype.

  2. The photovoltaic industry on the path to a sustainable future--environmental and occupational health issues.

    Science.gov (United States)

    Bakhiyi, Bouchra; Labrèche, France; Zayed, Joseph

    2014-12-01

    As it supplies solar power, a priori considered harmless for the environment and human health compared with fossil fuels, the photovoltaic (PV) industry seems to contribute optimally to reduce greenhouse gas emissions and, overall, to sustainable development. However, considering the forecast for rapid growth, its use of potentially toxic substances and manufacturing processes presenting health and safety problems may jeopardize its benefits. This paper aims to establish a profile of the PV industry in order to determine current and emerging environmental and health concerns. A review of PV system life cycle assessments, in light of the current state of the industry and its developmental prospects, reveals information deficits concerning some sensitive life cycle indicators and environmental impacts, together with incomplete information on toxicological data and studies of workers' exposure to different chemical and physical hazards. Although solar panel installation is generally considered relatively safe, the occupational health concerns related to the growing number of hazardous materials handled in the PV industry warrants an all-inclusive occupational health and safety approach in order to achieve an optimal equilibrium with sustainability. To prevent eco-health problems from offsetting the benefits currently offered by the PV industry, manufacturers should cooperate actively with workers, researchers and government agencies toward improved and more transparent research, the adoption of specific and stricter regulations, the implementation of preventive risk management of occupational health and safety and, lastly, greater responsibilization toward PV systems from their design until their end of life. Copyright © 2014 Elsevier Ltd. All rights reserved.

  3. Tangible Interaction in Industrial Plants

    DEFF Research Database (Denmark)

    Jensen, Mads Vedel

    With this dissertation, I answer the overall research question, which has been my focus through my research activities: How can interaction designers design user interfaces that invite, and allow interaction based on skilled practice in industrial contexts? My assumption is that the rapid invasion...... of technological solutions in industry has happened without respect for, and at cost of the skilled practice of operators and technicians. Under the heading “Tangible Interaction” I have answered the question through the work with three sub-questions: What is the nature of skills, what constitutes skilled practice...

  4. Three-dimensional CT image segmentation by volume growing

    Science.gov (United States)

    Zhu, Dongping; Conners, Richard W.; Araman, Philip A.

    1991-11-01

    The research reported in this paper is aimed at locating, identifying, and quantifying internal (anatomical or physiological) structures, by 3-D image segmentation. Computerized tomography (CT) images of an object are first processed on a slice-by-slice basis, generating a stack of image slices that have been smoothed and pre-segmented. The image smoothing operation is executed by a spatially adaptive filter, and the 2-D pre-segmentation is achieved by a thresholding process whereby each individual pixel in the input image space is consistently assigned a label, according to its CT number, i.e., the gray-level value. Given a sequence of pre-segmented images as 3-D input scene (a stack of image slices), the spatial connectivity that exists among neighboring image pixels is utilized in a volume growing process which generates a number of well-defined volumetric regions or image solides, each representing an individual anatomical or physiological structure in the input scene. The 3-D segmentation is implemented using a volume growing process so that the aspect of pixel spatial connectivity is incorporated into the image segmentation procedure. To initialize the volume growing process for each volumetric region in the input 3-D scene, a seed location for a region is defined and loaded into a queue data structure called seed queue. The volume growing process consists of a set of procedures that perform different operations on the volumetric data of a CT image sequence. Examples of experiment of the described system with CT image data of several hardwood logs are given to demonstrate usefulness and flexibility of this approach. This allows solutions to industrial web inspection, as well as to several problems in medical image analysis where low-level image segmentation plays an important role toward successful image interpretation tasks.

  5. THE IMPORTANCE OF LEGAL ORGANISATION OF RAPIDLY GROWING COMPANIES FOR INTERNATIONAL BUSINESS COMPETITIVENESS

    Directory of Open Access Journals (Sweden)

    Riko Novak

    2014-09-01

    Full Text Available This article discusses the importance of a company’s legal form for the process of internationalisation using a sample of 1577 Slovenian companies. We refer to previous studies and on the basis of additional statistical data evaluate whether the choice of corporate legal structure influences a company’s ability to compete internationally. In the domestic market, most companies operate as limited liability companies; this is also the most frequent legal form in which companies enter foreign markets. We conclude that the form by itself does not influence the decision to go international.

  6. [Case report: Rapidly growing abdominal wall giant desmoid tumour during pregnancy].

    Science.gov (United States)

    Palacios-Zertuche, Jorge Tadeo; Cardona-Huerta, Servando; Juárez-García, María Luisa; Valdés-Flores, Everardo; Muñoz-Maldonado, Gerardo Enrique

    Desmoid tumours are one of the rarest tumours worldwide, with an estimated yearly incidence of 2-4 new cases per million people. They are soft tissue monoclonal neoplasms that originate from mesenchymal stem cells. It seems that the hormonal and immunological changes occurring during pregnancy may play a role in the severity and course of the disease. The case is presented on 28-year-old female in her fifth week of gestation, in whom an abdominal wall tumour was found attached to left adnexa and uterus while performing a prenatal ultrasound. The patient was followed up under clinical and ultrasonographic surveillance. When she presented with abnormal uterine activity at 38.2 weeks of gestation, she was admitted and obstetrics decided to perform a caesarean section. Tumour biopsy was taken during the procedure. Histopathology reported a desmoid fibromatosis. A contrast enhanced abdominal computed tomography scan was performed, showing a tumour of 26×20.5×18cm, with well-defined borders in contact with the uterus, left adnexa, bladder and abdominal wall, with no evidence of infiltration to adjacent structures. A laparotomy, with tumour resection, hysterectomy and left salpingo-oophorectomy, components separation techniques, polypropylene mesh insertion, and drainage was performed. The final histopathology report was desmoid fibromatosis. There is no evidence of recurrence after 6 months follow-up. Desmoid tumours are locally aggressive and surgical resection with clear margins is the basis for the treatment of this disease, using radiotherapy, chemotherapy and hormone therapy as an adjunct in the treatment. Copyright © 2016 Academia Mexicana de Cirugía A.C. Publicado por Masson Doyma México S.A. All rights reserved.

  7. Water resources in a rapidly growing region-Oakland County, Michigan

    Science.gov (United States)

    Aichele, Stephen S.

    2005-01-01

    Oakland County is a suburban county in southeast Michigan. Population and demand for water grew steadily in the county over the 20th century, and these trends are expected to continue in coming decades. Roughly 75 percent of current water demand is met by imported water from the Detroit Water and Sewerage Division (DWSD), but water use from ground-water sources within the county still exceeds 43 million gallons per day. Because much of the population growth is in areas beyond the DWSD system, an additional 20-25 million gallons per day of supply may be necessary to meet future demands. Managing the wastewater produced while also protecting human and ecosystem health also may present challenges.

  8. Isolation of rapid growing mycobacteria from soil and water in Iran

    African Journals Online (AJOL)

    USER

    2010-06-14

    Jun 14, 2010 ... However, laboratory protocols that are commonly used to investigate the presence of mycobacteria in clinical specimens are insufficient for isolation of these organisms form soil and natural water samples (Chilima et al., 2006). In spite of large –scale BCG trial conducted in our country during past decades, ...

  9. Case series: Rapidly growing squamous cell carcinoma after cutaneous surgical intervention

    Directory of Open Access Journals (Sweden)

    Abdullah Ibrahim

    2017-12-01

    This case series explores the various mechanisms of de-novo squamous cell carcinoma development in areas of cutaneous surgical intervention, including graft harvest. It also provides recommendations regarding the necessary precautions to avoid implantation of squamous cell carcinoma into distant sites. Lastly it highlights the importance of surveillance for any suspicious lesions arising from areas of previous cutaneous surgical intervention.

  10. Emerging Development Pathways of Urban Livestock Production in Rapidly Growing West Africa Cities

    Directory of Open Access Journals (Sweden)

    Regina Roessler

    2016-11-01

    Full Text Available In this study, we try to capture the degree of specialization or integration, and of intensification or extensification, of (peri- urban livestock production, along with the factors that influence such decisions and their impact on natural resource uses. A total of 181 and 187 structured questionnaires were completed in livestock-keeping households in Ouagadougou (Burkina Faso and Tamale (Ghana. Categorical principal component and two-step cluster analysis were used to identify homogenous groups of livestock-keeping households. Cross tabulation and logistic regression analysis revealed factors that influence livestock husbandry, showing their impacts on resource use by livestock keepers in the two cities. A diversity of livestock species was kept, mostly integrated with crop farming. Yet, some households specialized in either sheep, pig or commercial milk production, and partly intensified their production. The decision to specialize and/or intensify livestock production is site-specific and influenced by the education level of the household head and security of land ownership. Higher inputs in livestock systems do not necessarily lead to higher outputs, and specialization inevitably leads to higher manure wastages. Therefore, links of livestock producers to crop farmers and markets for livestock manure must be strengthened to enable recycling of resources and limit negative externalities of specialized livestock production. Strategies need to be identified to improve livestock productivity by enhancing outputs as input use increases.

  11. Scar sarcoidosis on a finger mimicking a rapidly growing soft tissue tumour: a case report

    Directory of Open Access Journals (Sweden)

    Henrichs Marcel-Philipp

    2012-10-01

    Full Text Available Abstract Background Scar sarcoidosis is a rare and uncommon but specific cutaneous manifestation of sarcoidosis. In general it arises in pre-existing scars deriving from mechanical traumas. As most surgeons dealing with scars might not be aware of cutaneous sarcoidosis and its different types of appearance the appropriate staging and treatment might be missed or at least delayed. To our knowledge this is the first case in literature of scar sarcoidosis on a finger. Case presentation We present a case of a 33-year-old carpenter who developed scar sarcoidosis on his right index finger 4 years after the tendon of the long digital flexor got accidentally cut by an angle grinder. He was referred due to a swelling of the finger suspected to be a malignant soft tissue tumour. The circumference of the affected finger had almost doubled, adding up to 94 mm. Incision biopsy revealed typical noncaseating granulomas. Further investigation showed a systemic extent of the disease with involvement of the lung. A systemic treatment with oral steroids led to an almost full regression of the swelling with restoration of function and resolution of lung infiltrates. Conclusion In case of a suspicious and/or progressive swelling a definite diagnosis should be achieved by biopsy within a short time to enable a proper treatment. If scar sarcoidosis is proven further investigation is necessary to exclude a systemical involvement. A surgical treatment of the swelling is not indicated.

  12. Scar sarcoidosis on a finger mimicking a rapidly growing soft tissue tumour: a case report.

    Science.gov (United States)

    Henrichs, Marcel-Philipp; Streitbürger, Arne; Gosheger, Georg; Surke, Carsten; Dierkes, Christian; Hardes, Jendrik

    2012-10-02

    Scar sarcoidosis is a rare and uncommon but specific cutaneous manifestation of sarcoidosis. In general it arises in pre-existing scars deriving from mechanical traumas. As most surgeons dealing with scars might not be aware of cutaneous sarcoidosis and its different types of appearance the appropriate staging and treatment might be missed or at least delayed. To our knowledge this is the first case in literature of scar sarcoidosis on a finger. We present a case of a 33-year-old carpenter who developed scar sarcoidosis on his right index finger 4 years after the tendon of the long digital flexor got accidentally cut by an angle grinder. He was referred due to a swelling of the finger suspected to be a malignant soft tissue tumour. The circumference of the affected finger had almost doubled, adding up to 94 mm. Incision biopsy revealed typical noncaseating granulomas. Further investigation showed a systemic extent of the disease with involvement of the lung. A systemic treatment with oral steroids led to an almost full regression of the swelling with restoration of function and resolution of lung infiltrates. In case of a suspicious and/or progressive swelling a definite diagnosis should be achieved by biopsy within a short time to enable a proper treatment. If scar sarcoidosis is proven further investigation is necessary to exclude a systemical involvement. A surgical treatment of the swelling is not indicated.

  13. PET/MR - a rapidly growing technique of imaging in oncology and neurology.

    Science.gov (United States)

    Sałyga, Alicja; Guzikowska-Ruszkowska, Izabela; Czepczyński, Rafał; Ruchała, Marek

    2016-01-01

    The combination of positron emission tomography (PET) and magnetic resonance (MR) has become a subject of interest for researchers in the recent several years. Positron emission tomography in combination with magnetic resonance (PET/MR) is the most recent imaging technique classified in the so called hybrid systems category. This review briefly discusses the development history of PET/MR scanners, the principle of their operation, of tandem systems, as well as fully integrated devices. Further, it summarizes recent reports on the application of PET/MR scans and their possible future role in oncological and non-oncological diagnostics. Recent reports regarding the application of PET/MR scanners show huge potential of simultaneously received images, which exceed the advantages of either of those scans used separately. However, the results so far remain uncertain and require further investigations, especially in terms of clinical studies, not only for scientific purposes.

  14. A rapidly growing electronic publishing trend: audiobooks for leisure and education

    OpenAIRE

    Engelen, J J

    2008-01-01

    This contribution focuses on the relatively new phenomenon of the purely commercial availability of audiobooks, sometimes also called “spoken books”, “talking books” or “narrated books”. Having the text of a book read aloud and recorded has been for a very long time the favourite solution to make books and other texts accessible for persons with a serious reading impairment such as blindness or low vision. Specialised production centres do exist in most countries of the world for producing th...

  15. Isolation of rapid growing mycobacteria from soil and water in Iran ...

    African Journals Online (AJOL)

    A total of 350 soil samples were collected from different part of Uremia city and suburbs. We used 3% sodium lauryl sulfate and 1% NaOH for decontamination of soil samples. Of 350 samples, mycobacteria were isolated from 65 (18.3%) specimens. Mycobacterium fortuitum with 18(5.14) strains yielded the highest ...

  16. Peptostreptococcus productus strain that grows rapidly with CO as the energy source.

    Science.gov (United States)

    Lorowitz, W H; Bryant, M P

    1984-05-01

    Anaerobic bacteria were enriched with a sewage digestor sludge inoculum and a mineral medium supplemented with B-vitamins and 0.05% yeast extract and with a 50% CO-30% N2-20% CO2 (2 atm [202 kPa]) gas phase. Microscopic observation revealed an abundance of gram-positive cocci, 1.0 by 1.4 micron, which occurred in pairs or chains. The coccus, strain U-1, was isolated by using roll tubes with CO as the energy source. Based on morphology, sugars fermented, fermentation products from glucose (H2, acetate, lactate, and succinate), and other features, strain U-1 was identified as Peptostreptococcus productus IIb (similar to the type strain). The doubling time with up to 50% CO was 1.5 h; acetate and CO2 were the major products. In addition, no significant change in the doubling time was observed with 90% CO. Some stock strains were also able to use CO, although not as well. Strain U-1 produced acetate during growth with H2-CO2. Other C1 compounds did not support growth. Most probable numbers of CO utilizers morphologically identical with strain U-1 were 7.5 X 10(6) and 1.1 X 10(5) cells per g for anaerobic digestor sludge and human feces, respectively.

  17. Isolation of rapid growing mycobacteria from soil and water in Iran

    African Journals Online (AJOL)

    USER

    2010-06-14

    Jun 14, 2010 ... A total of 350 soil samples were collected from different part of Uremia city and suburbs. We used 3% sodium lauryl sulfate and 1% NaOH for decontamination of soil samples. Of 350 samples, mycobacteria were isolated from 65 (18.3%) specimens. Mycobacterium fortuitum with 18(5.14) strains yielded the.

  18. Mycobacterium aquaticum sp. nov., a rapidly growing species isolated from haemodialysis water.

    Science.gov (United States)

    Hashemi Shahraki, Abdolrazagh; Trovato, Alberto; Droz, Sara; Haidarieh, Parvin; Borroni, Emanuele; Mirsaeidi, Mehdi; Mannino, Roberta; Hashemzadeh, Mohamad; Mariottini, Alessandro; Cirillo, Daniela Maria; Tortoli, Enrico

    2017-09-01

    The characterization of five Iranian isolates, four from hospital haemodialysis water and one from the sputum of a patient, led to the detection of a novel mycobacterium species. The strains were characterized by mucoid colonies developing in 3-5 days at temperatures ranging from 25 to 37 °C. The biochemical test pattern was unremarkable while the HPLC profile of mycolic acids resembled that of Mycobacterium fortuitum. The sequences of three major housekeeping genes (16S rRNA, hsp65 and rpoB) were unique and differed from those of any other mycobacterium. Mycobacterium brisbanense, which is the species that shared the highest 16S rRNA gene sequence similarity (99.03 %), was distinct, as shown by the average nucleotide identity and by the genome to genome distance values (91.05 and 43.10 %, respectively). The strains are thus considered to represent a novel species of the genus Mycobacterium, for which the name Mycobacterium aquaticum sp. nov. is proposed. The type strain is RW6T (=DSM 104277T=CIP111198T).

  19. Predictors of Postpartum Depression in Dubai, a Rapidly Growing Multicultural Society in the United Arab Emirates.

    Science.gov (United States)

    Alhammadi, Salwa M; Hashem, Lien Abou; Abusbeih, Zainah R; Alzaabi, Fatima S; Alnuaimi, Salama N; Jalabi, Ala F; Nair, Satish C; Carrick, Frederick R; Abdulrahman, Mahera

    2017-09-01

    Postpartum depression (PPD) is a significant public health problem adversely affecting mothers, their newborns, and other members of the family. Although PPD is common and potentially dangerous, only a minority of the cases are identified in primary health care settings during routine care, and the majority of depressed mothers in the community lies unrecognized and therefore untreated. In this study, a total of 1500 mothers were approached randomly, 808 accepted to participate, and 504 were within the inclusion criteria (women who had a birth of a singleton full-term healthy infant, had an uncomplicated pregnancy, and were within their one week to six months postpartum). The participants completed the Edinburgh Postnatal Depression Scale. A total of 168 women had an EPDS score ≥10, yielding a crude prevalence rate of 33%. The prevalence of suicidal ideation was 14 out of 504 (3%), among which 11 (79%) had EPDS score of ≥10. We fitted multiple linear regression models to evaluate the predictors of variables measured on the EPDS scale. This model was statistically significant ppredictors. The findings of this study are anticipated to entail the government and policy makers in the region to pay more attention to the apparently high prevalence of unrevealed PPD in the community. It is crucial to enhance screening mechanisms for early detection, providing interventions to manage symptoms, and at the same time mandating local guidelines to address the PPD pathology as a high priority for the UAE population.

  20. Metal-organic frameworks: a rapidly growing class of versatile nanoporous materials.

    Science.gov (United States)

    Meek, Scott T; Greathouse, Jeffery A; Allendorf, Mark D

    2011-01-11

    Metal-organic frameworks (MOFs) represent a new class of hybrid organic-inorganic supramolecular materials comprised of ordered networks formed from organic electron donor linkers and metal cations. They can exhibit extremely high surface areas, as well as tunable pore size and functionality, and can act as hosts for a variety of guest molecules. Since their discovery, MOFs have enjoyed extensive exploration, with applications ranging from gas storage to drug delivery to sensing. This review covers advances in the MOF field from the past three years, focusing on applications, including gas separation, catalysis, drug delivery, optical and electronic applications, and sensing. We also summarize recent work on methods for MOF synthesis and computational modeling.

  1. measles immunisation growing peri-urban area of a mass a rapidly ...

    African Journals Online (AJOL)

    rate is attributed to the influx rate, campaign design and implementation, and factors related to child and career mobi- lity. Alternative immunisation strategies, with social awareness playing a key role, are being urgently investigated. S Air Med J 1989; 76: 157-159. Measles became a notifiable disease in the RSA in 1979.1.

  2. Contralateral trigeminal neuralgia in a rapidly growing vestibular schwannoma: A case report.

    Science.gov (United States)

    Seo, Youngbeom; Kim, Dong Gyu

    2018-01-01

    We present a rare case of vestibular schwannoma (VS) with contralateral trigeminal neuralgia. A 59 year-old woman presented with right-sided trigeminal neuralgia and a small VS in the left cerebellopontine angle (CPA) that was found via magnetic resonance imaging. The patient was administered medication; however, her symptoms gradually aggravated, and the size of the tumor increased. Two years after the initial diagnosis, the patient underwent surgical resection. After surgical resection, the patient's facial pain was improved. The trigeminal neuralgia appeared to be related to brainstem displacement caused by the contralateral VS. For VS with contralateral trigeminal neuralgia, surgical resection of the tumor should be considered as a possible treatment strategy. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. How to measure the regional impact of industrial tourism?

    OpenAIRE

    Otgaar, Alexander; Klijs, Jeroen

    2010-01-01

    Already in the 1980s industrial tourism - people visiting operational companies - has been identified as a growing segment of regional tourism industries. Since then the pressure on companies to open their doors for other members of the society has only increased. Several scholars (e.g. Frew, 2000; Soyez, 1993; Mitchell & Orwig, 2002) have discussed the relevance of industrial tourism for regions and firms. There are several reasons to promote industrial tourism but also to keep doors closed....

  4. A Scheduling Problem in the Baking Industry

    OpenAIRE

    Felipe Augusto Moreira da Silva; Antonio Carlos Moretti; Anibal Tavares de Azevedo

    2014-01-01

    This paper addresses a scheduling problem in an actual industrial environment of a baking industry where production rates have been growing every year and the need for optimized planning becomes increasingly important in order to address all the features presented by the problem. This problem contains relevant aspects of production, such as parallel production, setup time, batch production, and delivery date. We will also consider several aspects pertaining to transportation, such as the t...

  5. Sustainability in the global hotel industry

    OpenAIRE

    Jones, Peter; Hillier, David; Comfort, Daphne

    2014-01-01

    The purpose of this paper is to provide an exploratory review of how the global hotel industry publicly communicates its approach to sustainability. \\ud \\ud The paper begins with an outline of the growing importance of sustainability within the hospitality industry and a short discussion of the characteristics of sustainability. The paper draws its empirical material from the most recent information on sustainability posted on the world's leading hotel chains' corporate websites. \\ud \\ud The ...

  6. Training industry needs & Technology Industry needs

    NARCIS (Netherlands)

    Klemke, Roland; Kuula, Timo; Helin, Kaj; Wild, Fridolin

    2017-01-01

    This deliverable joins D1.1 (User Industry Needs) and D1.2 (Technology Industry Needs and Affordances) and reports on the outcomes of Tasks T1.1 (Training Industry Assessment) and T1.2 (Technology Industry Assessment). We merged the deliverables for the following reasons: For readability ease we

  7. Growing pressures on Circumpolar North wilderness: A case for coordinated research and education

    Science.gov (United States)

    Lilian Alessa; Alan Watson

    2002-01-01

    Pressures are growing on undeveloped (wild) places in the Circumpolar North. Among them are economic development, oil and gas exploration and extraction, development of geothermal energy resources, development of heavy industry close to energy sources, and lack of appreciation for “other” orientations toward wilderness resources. An international seminar in Anchorage,...

  8. The Aesthetics of Association: Business, Education, and the Growing Discourse of Corporate Social Responsibility

    Science.gov (United States)

    Manteaw, Bob Offei

    2009-01-01

    The last few decades have seen an unprecedented transformation in business involvement in education, particularly in Western industrialized societies where privatization, commercialization and neo-liberal discourses continue to dominate educational thinking and practice. This paper foregrounds the growing perception of math and science as…

  9. Industrial radiographies

    CERN Multimedia

    2005-01-01

    The Radiation Protection group wishes to remind CERN staff responsible for contractors performing X-ray inspections on the CERN sites that the firms must apply the legislation in force in their country of origin, in particular with regard to the prevention of risks relating to ionizing radiation. Industrial radiography firms called on to work on the CERN sites must also comply with the rules laid down in CERN's Radiation Safety Manual and be registered in the relevant CERN database. Since CERN is responsible for safety on its own site, a number of additional rules have been laid down for this kind of work, as set out in Radiation Protection Procedure PRP30 https://edms.cern.ch/file/346848/LAST_RELEASED/PRP30.pdf The CERN Staff Member responsible for the contract shall register the company and issue notification that an X-ray inspection is to be performed via the web interface at the following address: http://cern.ch/rp-radio

  10. A National Skills Assessment of the U.S. Wind Industry in 2012

    Energy Technology Data Exchange (ETDEWEB)

    Leventhal, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Tegen, S. [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2013-06-01

    This report examines today’s domestic wind workforce, projected workforce needs as the industry grows, and how existing and new programs can meet the wind industry's future education and training needs.

  11. Searching for convergence and its causes – an industry perspective

    NARCIS (Netherlands)

    Inklaar, Robert; Jorgenson, Dale W.; Fukao, Kyoji; Timmer, Marcel P.

    2016-01-01

    The past 20 years has been a period of rapid growth in emerging economies, leading to convergence in income and productivity levels. Less is known about the industry origins of this development, a gap this chapter aims to fill. For 30 industries in 40 economies, I estimate industry relative

  12. Fiber Bragg Grating Sensors for the Oil Industry

    Directory of Open Access Journals (Sweden)

    Xueguang Qiao

    2017-02-01

    Full Text Available With the oil and gas industry growing rapidly, increasing the yield and profit require advances in technology for cost-effective production in key areas of reservoir exploration and in oil-well production-management. In this paper we review our group’s research into fiber Bragg gratings (FBGs and their applications in the oil industry, especially in the well-logging field. FBG sensors used for seismic exploration in the oil and gas industry need to be capable of measuring multiple physical parameters such as temperature, pressure, and acoustic waves in a hostile environment. This application requires that the FBG sensors display high sensitivity over the broad vibration frequency range of 5 Hz to 2.5 kHz, which contains the important geological information. We report the incorporation of mechanical transducers in the FBG sensors to enable enhance the sensors’ amplitude and frequency response. Whenever the FBG sensors are working within a well, they must withstand high temperatures and high pressures, up to 175 °C and 40 Mpa or more. We use femtosecond laser side-illumination to ensure that the FBGs themselves have the high temperature resistance up to 1100 °C. Using FBG sensors combined with suitable metal transducers, we have experimentally realized high- temperature and pressure measurements up to 400 °C and 100 Mpa. We introduce a novel technology of ultrasonic imaging of seismic physical models using FBG sensors, which is superior to conventional seismic exploration methods. Compared with piezoelectric transducers, FBG ultrasonic sensors demonstrate superior sensitivity, more compact structure, improved spatial resolution, high stability and immunity to electromagnetic interference (EMI. In the last section, we present a case study of a well-logging field to demonstrate the utility of FBG sensors in the oil and gas industry.

  13. Fiber Bragg Grating Sensors for the Oil Industry.

    Science.gov (United States)

    Qiao, Xueguang; Shao, Zhihua; Bao, Weijia; Rong, Qiangzhou

    2017-02-23

    With the oil and gas industry growing rapidly, increasing the yield and profit require advances in technology for cost-effective production in key areas of reservoir exploration and in oil-well production-management. In this paper we review our group's research into fiber Bragg gratings (FBGs) and their applications in the oil industry, especially in the well-logging field. FBG sensors used for seismic exploration in the oil and gas industry need to be capable of measuring multiple physical parameters such as temperature, pressure, and acoustic waves in a hostile environment. This application requires that the FBG sensors display high sensitivity over the broad vibration frequency range of 5 Hz to 2.5 kHz, which contains the important geological information. We report the incorporation of mechanical transducers in the FBG sensors to enable enhance the sensors' amplitude and frequency response. Whenever the FBG sensors are working within a well, they must withstand high temperatures and high pressures, up to 175 °C and 40 Mpa or more. We use femtosecond laser side-illumination to ensure that the FBGs themselves have the high temperature resistance up to 1100 °C. Using FBG sensors combined with suitable metal transducers, we have experimentally realized high- temperature and pressure measurements up to 400 °C and 100 Mpa. We introduce a novel technology of ultrasonic imaging of seismic physical models using FBG sensors, which is superior to conventional seismic exploration methods. Compared with piezoelectric transducers, FBG ultrasonic sensors demonstrate superior sensitivity, more compact structure, improved spatial resolution, high stability and immunity to electromagnetic interference (EMI). In the last section, we present a case study of a well-logging field to demonstrate the utility of FBG sensors in the oil and gas industry.

  14. A Boom for Whom? Exploring the Impacts of a Rapid Increase in the Male Population Upon Women's Services in Darwin, Northern Territory.

    Science.gov (United States)

    Ennis, Gretchen; Tofa, Matalena; Finlayson, Mary; U'Ren, Julie

    2016-05-03

    A rapidly expanding natural-resource extraction industry and a growing military presence mean an increasingly male-skewed population for the city of Darwin, Australia. This has sparked concerns about the potential for increased violence against women. In this article, we present qualitative research detailing the views of 13 participants from 10 women's support services in the Darwin area. We argue that women's support services bear witness to and are tasked with responding to the impacts of population change on women, yet their work is undermined by uncertainties that stem from neoliberal funding rationales and limited demands on companies to address social issues. © The Author(s) 2016.

  15. The Industrial Ecology of Materials

    Science.gov (United States)

    Frosch, Robert A.

    1996-03-01

    Industrial Ecology designates a systems view of material and energy flows in the industrial system, and between the industrial system and the environment. The title and theme are by analogy with natural ecosystems. Within the framework of sustainability, (the possibility of long term high quality human life in an excellent global environment), industrial ecologists examine possibilities for moving from open flow materials systems towards closed loop systems. This shift is intended to be both a means of lightening the environmental burdens arising from processes and products, and a means of approaching long term sustainability of materials use. Using fundamental physical and chemical principles, and some business experiences, industrial ecologists suggest that the reuse of wastes, products, parts, components, and materials is likely to be an environmentally and economically beneficial strategy. The strategy could be improved with some technological and business developments. While there are interesting advantages to this rapidly developing approach, and from the ideas and tools being used within it, a number of problems also arise for industry, consumers and the framers of public policy.

  16. The SGIA and the Common Growing Language

    Directory of Open Access Journals (Sweden)

    Laurentiu CIOVICA

    2011-01-01

    Full Text Available Human or virtual agents are presented in our lives daily. They serve our purposes and represent us in different many situations. Nowadays the number of virtual agents is increasing daily because they are cheaper, faster and more accurate than human agents. Our aim in this article is to define a new type of intelligent agent called SGIA – Self Growing Intelligent Agent and a new defining language for it. The SGIA agent is an intelligent agent with all the common agents’ characteristics and with other special one: that to learn and grow by itself in knowledge and size.

  17. Growing pioneer plants for a lunar base

    Science.gov (United States)

    Kozyrovska, N. O.; Lutvynenko, T. L.; Korniichuk, O. S.; Kovalchuk, M. V.; Voznyuk, T. M.; Kononuchenko, O.; Zaetz, I.; Rogutskyy, I. S.; Mytrokhyn, O. V.; Mashkovska, S. P.; Foing, B. H.; Kordyum, V. A.

    A precursory scenario of cultivating the first plants in a lunar greenhouse was elaborated in frames of a conceptual study to grow plants for a permanently manned lunar base. A prototype plant growth system represents an ornamental plant Tagetes patula L. for growing in a lunar rock anorthosite as a substrate. Microbial community anticipated to be in use to support a growth and development of the plant in a substrate of low bioavailability and provide an acceptable growth and blossoming of T. patula under growth limiting conditions.

  18. New Zealand's drug development industry.

    Science.gov (United States)

    Lockhart, Michelle Marie; Babar, Zaheer-Ud-Din; Carswell, Christopher; Garg, Sanjay

    2013-09-13

    The pharmaceutical industry's profitability depends on identifying and successfully developing new drug candidates while trying to contain the increasing costs of drug development. It is actively searching for new sources of innovative compounds and for mechanisms to reduce the enormous costs of developing new drug candidates. There is an opportunity for academia to further develop as a source of drug discovery. The rising levels of industry outsourcing also provide prospects for organisations that can reduce the costs of drug development. We explored the potential returns to New Zealand (NZ) from its drug discovery expertise by assuming a drug development candidate is out-licensed without clinical data and has anticipated peak global sales of $350 million. We also estimated the revenue from NZ's clinical research industry based on a standard per participant payment to study sites and the number of industry-sponsored clinical trials approved each year. Our analyses found that NZ's clinical research industry has generated increasing foreign revenue and appropriate policy support could ensure that this continues to grow. In addition the probability-based revenue from the out-licensing of a drug development candidate could be important for NZ if provided with appropriate policy and financial support.

  19. Rapid Active Sampling Package

    Science.gov (United States)

    Peters, Gregory

    2010-01-01

    A field-deployable, battery-powered Rapid Active Sampling Package (RASP), originally designed for sampling strong materials during lunar and planetary missions, shows strong utility for terrestrial geological use. The technology is proving to be simple and effective for sampling and processing materials of strength. Although this originally was intended for planetary and lunar applications, the RASP is very useful as a powered hand tool for geologists and the mining industry to quickly sample and process rocks in the field on Earth. The RASP allows geologists to surgically acquire samples of rock for later laboratory analysis. This tool, roughly the size of a wrench, allows the user to cut away swaths of weathering rinds, revealing pristine rock surfaces for observation and subsequent sampling with the same tool. RASPing deeper (.3.5 cm) exposes single rock strata in-situ. Where a geologist fs hammer can only expose unweathered layers of rock, the RASP can do the same, and then has the added ability to capture and process samples into powder with particle sizes less than 150 microns, making it easier for XRD/XRF (x-ray diffraction/x-ray fluorescence). The tool uses a rotating rasp bit (or two counter-rotating bits) that resides inside or above the catch container. The container has an open slot to allow the bit to extend outside the container and to allow cuttings to enter and be caught. When the slot and rasp bit are in contact with a substrate, the bit is plunged into it in a matter of seconds to reach pristine rock. A user in the field may sample a rock multiple times at multiple depths in minutes, instead of having to cut out huge, heavy rock samples for transport back to a lab for analysis. Because of the speed and accuracy of the RASP, hundreds of samples can be taken in one day. RASP-acquired samples are small and easily carried. A user can characterize more area in less time than by using conventional methods. The field-deployable RASP used a Ni

  20. Competing For industry Resources

    Energy Technology Data Exchange (ETDEWEB)

    Africano, Albina Assis

    1998-12-31

    Presentation given by The Minister of Petroleum, Angola. In recent years, the Angolan petroleum industry has achieved significant results by creating attractive investment conditions, which motivated the multinational companies, encouraged competition between them and enhanced activity. Angolan policy is based on the principle of reciprocity of interests and mutual benefits for both parties. Angolan production sharing agreements, which have been used since 1980, are designed to give investors a 15% to 30% return on investment, depending on reservoir size, and to allow investment recovery in 4 to 5 years. For shallow water contracts, profit oil sharing is fixed and based on cumulative production. For deep water, profit oil is shared based on the internal rate of return. If field profitability proves less than expected, the economic parameters are changed or other alternatives are offered. Contracts guarantee that benefits will not be below expectations due to changes in legal matters. The Angolan Petroleum Law has been in force since 1978. The Angolan Government has made a point of winning the confidence of the oil companies by being co-operative. Foreign personnel have to be hired since the industry is developing too rapidly for the training of Angolans to keep track. Progress in geophysical techniques has substantially reduced the risk in exploration and advanced drilling techniques have made it possible to drill to 2000 m, where mammoth reservoirs have been discovered

  1. Cleaner Production: A Growing Movement in Brazilian Companies

    Directory of Open Access Journals (Sweden)

    Oduvaldo Vendrametto

    2010-03-01

    Full Text Available Cleaner Production (CP is gaining emphasis in both world and Brazilian production sectors. Nature’s warnings indicating the exhaustion of any capacity to absorb and regenerate waste, stricter legislation regarding pollution emitters, market competitiveness associated with environmental and social responsibility cause concerns and lead to actions to reduce aggressions against the environment. This paper shows evidence of this concern and presents cases in which a large automotive industry, acting as a partner to suppliers, promotes changes in how it delivers its products, eliminating large cardboard, plastic and wood packaging. A small company had a similar initiative, reducing the use of cardboard and plastic packaging. More important is the revelation of a widely dispersed, yet growing and incremental movement of responsibilities among companies.The benefits of cleaner production implementation were evaluated by confronting environmental and financial assessment. For the ambient evaluation, it will be used methodology of Material Intensity (Wuppertal Institute, a.

  2. Yarn image segmentation using the region growing algorithm

    Science.gov (United States)

    Fabijańska, Anna

    2011-11-01

    This paper is about the development of the image segmentation algorithm for the industrial measurement system. Specifically, the problem of segmentation of textile yarn images is considered. The algorithm developed for yarn hairiness analyzer is introduced. It aims at extracting single fibers protruding from the yarn core. The algorithm is a region growing-based approach where the growth of the region is guided and constrained by the coherence enhancing diffusion filter. Results of the proposed method are presented and compared with the results provided by the traditional clustering approaches and recent, well-established segmentation methods. The comparison proves that the proposed segmentation algorithm provides high quality results and significantly outperforms other methods in number of fibers extracted from the background.

  3. Rapid Prototyping Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The ARDEC Rapid Prototyping (RP) Laboratory was established in December 1992 to provide low cost RP capabilities to the ARDEC engineering community. The Stratasys,...

  4. Cook & Chill - Rapid Chilling of Food 'in situ'

    DEFF Research Database (Denmark)

    Paul, Joachim

    2003-01-01

    Rapid cooling of products is of increasing importance for food preservation and for industrial processes. Slurry ice (Binary Ice) is a two-phase cooling fluid consisting of suspended ice crystals in an aqueous solution or mixture. Latent energy contained in the fluid yields rapid cooling which...

  5. Growing skull fracture in a red-tailed hawk (Buteo jamaicensis).

    Science.gov (United States)

    Rush, E Marie; Shores, Andrew; Meintel, Sarah; Hathcock, John T

    2014-09-01

    Growing skull fractures have been reported in humans for many years, usually resulting from injury to the soft skull during the rapid growth period of an infant's life. Nestling raptors have thin, fragile skulls, a rapid growth rate, and compete aggressively for food items. Skull trauma may occur, which may lead to the development of a growing skull fracture. Growing skull fractures may be under-diagnosed in raptor rehabilitation facilities that do not have access to advanced technologic equipment. Three-dimensional (3-D) computed tomography was used to diagnose a growing skull fracture in a red-tailed hawk (Buteo jamaicensis). The lesion was surgically repaired and the animal was eventually returned to the wild. This is the first report of a growing skull fracture in an animal. In this case, 3-D computed topographic imaging was utilized to diagnose a growing skull fracture in a red-tailed hawk, surgical repair was performed, and the bird recovered completely and was ultimately released.

  6. Growing up Female: As Six become One

    Science.gov (United States)

    Balto, Karen; Balto, Sylvia

    1971-01-01

    Growing up Female: As Six Become One" is an excellent film for people of any age and appropriate for any group. The film explores the lives of six American women showing how they are socialized and what their roles in society are. (Author)

  7. Growing Languages with Metamorphic Syntax Macros

    DEFF Research Database (Denmark)

    Brabrand, Claus; Schwartzbach, Michael Ignatieff

    2002-01-01

    simultaneously on multiple parse trees at once. The result is a highly flexible mechanism for growing new language constructs without resorting to compile-time programming. In fact, whole new languages can be defined at surprisingly low cost.This work is fully implemented as part of the bigwig system...

  8. Pueblo Girls: Growing Up in Two Worlds.

    Science.gov (United States)

    Keegan, Marcia

    This book portrays San Ildefonso Pueblo on the east bank of the Rio Grande river in New Mexico through the lives of Sonja, age 10, and her sister Desiree, age 8. Growing up in San Ildefonso Pueblo, the girls enjoy the same activities as other American girls, such as basketball, cheerleading, playing video games, and sending e-mail. But they also…

  9. What a Pain! Kids and Growing Pains

    Science.gov (United States)

    ... Steven Dowshen, MD Date reviewed: June 2015 For Teens For Kids For Parents MORE ON THIS TOPIC Why Do I Have Pain? How Do Pain Relievers Work? Growth Disorders I'm Growing Up - But Am I Normal? What Medicines Are and What They Do Feeling Too Tall or Too Short Contact Us Print Resources Send ...

  10. Growing Income Inequality Threatens American Education

    Science.gov (United States)

    Duncan, Greg J.; Murnane, Richard J.

    2014-01-01

    The first of two articles in consecutive months describes the origins and nature of growing income inequality, and some of its consequences for American children. It documents the increased family income inequality that's occurred over the past 40 years and shows that the increased income disparity has been more than matched by an expanding…

  11. Growing Up in Germany: A National Report.

    Science.gov (United States)

    Krappmann, Lothar

    1999-01-01

    Summarizes a Federal Ministry of Youth report on the conditions under which children grow up in Germany. Notes manifold problems that children face under today's living conditions. Presents recommendations and suggestions for providing a network of measures, relationships, and institutions to support children's development and education in family,…

  12. Determination of responses of growing pigs to

    African Journals Online (AJOL)

    1998-03-09

    Mar 9, 1998 ... The responses in growing pigs to balanced diets at different dietary energy levels are estimated from published data after recalculation of digestible energy (DE) iev- els using standard tables. Although responses in live weight gain (ADG), food intake (Fl), digestible energy intake (DEI) and food conversion ...

  13. How fast to northern hardwoods grow?

    Science.gov (United States)

    Rapheal Zon; H.F. Scholz

    1929-01-01

    The knowledge of the rate at which trees grow in virgin forests, after clear cutting and under selective logging, is indispensable in any forest calculations or forest practice. The enactment of the Forest Crop Law, which brought under its operation about 175,000 acres of cut-over land during the first year, the example set by several progressive lumbermen in selective...

  14. Growing Up in an Alcoholic Family.

    Science.gov (United States)

    Abbott, Stephanie

    1993-01-01

    Discusses problems faced by children growing up in an alcoholic family. Reviews four survivor roles of children of alcoholics (COAs): super-coper, scapegoat, lost child, and family mascot. Describes alcoholism as a disease of denial. Reviews the Children of Alcoholics movement begun by adult COAs to become advocates for COAs. (NB)

  15. Growing up as a Young Artist

    Science.gov (United States)

    Szekely, George

    2012-01-01

    "Growing Up as a Young Artist" is an illustrated book assignment that involves researching family scrapbooks, photo albums and films, and inquiring about family anecdotes for clues to one's artistic roots. Students creatively reflect on their early memories of imaginative events, as each page is filled with memories of creative activities they…

  16. Play Games to Grow up Bilingual

    DEFF Research Database (Denmark)

    Valente, Andrea; Marchetti, Emanuela

    2007-01-01

    A new kind of computer game is proposed, to support the linguistic development of primary school children, growing in multilingual environments: with it players will be able to simultaneously learn multiple languages. The novel idea is to treat words in different languages as physical items, that...

  17. Play Games to Grow up Bilingual

    DEFF Research Database (Denmark)

    Valente, Andrea; Marchetti, Emanuela

    2008-01-01

    A new kind of computer game is proposed, to support the linguistic development of primary school children, growing in multilingual environments: with it players will be able to simultaneously learn multiple languages. The novel idea is to treat words in different languages as physical items, that...

  18. Preliminary characterization of slow growing rhizobial strains ...

    African Journals Online (AJOL)

    In this paper, we did some preliminary characterization of six slow growing rhizobial strains, isolated from Retama monosperma (L.) Boiss. root nodules sampled from 3 sites along the coast of Oran (CapeFalcon, Bousfer and MersElHadjadj) in Northwestern Algeria. Results of this study showed that all strains had a very ...

  19. growing African giant rats Cricetomys gambianus

    African Journals Online (AJOL)

    Thermoregulation and evaporative water loss in growing African giant rats Cricetomys gambianus. M.H. Knight. Mammal Research Institute, University of Pretoria, Pretoria. With an increase in mass, weaned giant rat pups. Cricetomys gambianus, showed a corresponding decline in mass specific metabolism, conductance ...

  20. Improving the Supply Chain of Housing Industrialization from Transaction Costs Perspective : A Literature Review

    NARCIS (Netherlands)

    Wu, H.; Qian, K.; Visscher, H.J.; Straub, A.

    2017-01-01

    Sustainable development has been the focus of all major industries in the world, especially in the construction industry. As one of the sustainable construction modes, housing industrialization (HI) is now absorbing a growing number of attentions that lead the industry to go green. However, the

  1. CARROT SEED GROWING THROUGH WINTERING SEEDLINGS

    Directory of Open Access Journals (Sweden)

    A. P. Zvedenuk

    2017-01-01

    Full Text Available The results of research work on carrot seed growing through wintering seedlings carried out at laboratory of seed studies and seed production of Transnistrian Research Institute of Agriculture, on the soil of the first terrace at the rive Dniester were presented in the article. Seed bearing plants of garden carrot ‘Krasavka’ were the object of the study. The seeds were sown to produce the seedlings on 15-16 August. In the first decade of December the plants were covered with white agrotextile with density 23g/m2 that was removed at the beginning of April. The proportion of plant that passed the winter depending on a year of cultivation was 95-100% under argotextile, and 50-80% in open plot. The plants under agrotextile reached 28 cm a high and had 5-7 well-developed leaves, while those on the open plot were at phase of active foliage growing about 10-13 cm. long. Thus, for early mechanized planting in optimal terms the wintering seedlings grown under agrotextile had the best biometrical characteristics. Moreover the outcome of carrot seedlings was 1.2-1.25 million per hectare. Such quantity of seedlings was sufficient to plant 9-10 ha of carrot plants, where the coefficient of multiplication reached 9-10, and only 3 when growing seeds through mother plant as biennial culture. Viability of seed plants grown through seedlings was 100%. Losses of plant with weight 120-150 grams from damage caused by diseases was 23%. The seed yield, when growing seedlings was 639 kg/ha, but growing through plants was 332 kg/ha. The seed outcome suitable for precise mechanized sowing through seedling growing was 77%, where seed germination was 90%, with seed fraction 1.51 and >2.0 mm. It was essentially improved their yielding characteristics. Seed outcome from this fraction obtained through planting method was 32%. The proportion of seeds in fraction 1-1.5 mm was 68%. For mechanized single-seed sowing, the seeds can be used only after mini-coating. The seed

  2. Next generation industrial biotechnology based on extremophilic bacteria.

    Science.gov (United States)

    Chen, Guo-Qiang; Jiang, Xiao-Ran

    2017-12-06

    Industrial biotechnology aims to produce bulk chemicals including polymeric materials and biofuels based on bioprocessing sustainable agriculture products such as starch, fatty acids and/or cellulose. However, traditional bioprocesses require bioreactors made of stainless steel, complicated sterilization, difficult and expensive separation procedures as well as well-trained engineers that are able to conduct bioprocessing under sterile conditions, reducing the competitiveness of the bio-products. Amid the continuous low petroleum price, next generation industrial biotechnology (NGIB) allows bioprocessing to be conducted under unsterile (open) conditions using ceramic, cement or plastic bioreactors in a continuous way, it should be an energy, water and substrate saving technology with convenient operation procedure. NGIB also requires less capital investment and reduces demand on highly trained engineers. The foundation for the simplified NGIB is microorganisms that resist contaminations by other microbes, one of the examples is rapid growing halophilic bacteria inoculated under high salt concentration and alkali pH. They have been engineered to produce multiple products in various scales. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Impressions management: lessons from the oil industry

    NARCIS (Netherlands)

    M.D. van Halderen (Mignon); G.A.J.M. Berens (Guido); M. Bhatt (Mamta); T.J. Brown (Tom); C.B.M. van Riel (Cees)

    2016-01-01

    markdownabstractIn the late 1990s, after over a century of extracting hydrocarbons, the petroleum industry faced a growing scientific consensus that pollution from fossil fuels is a major cause of global warming. Operationally and in terms of their global image, oil and gas companies faced a serious

  4. Modeling Industrial Lot Sizing Problems: A Review

    NARCIS (Netherlands)

    R.F. Jans (Raf); Z. Degraeve (Zeger)

    2005-01-01

    textabstractIn this paper we give an overview of recent developments in the field of modeling single-level dynamic lot sizing problems. The focus of this paper is on the modeling various industrial extensions and not on the solution approaches. The timeliness of such a review stems from the growing

  5. Computer vision in the poultry industry

    Science.gov (United States)

    Computer vision is becoming increasingly important in the poultry industry due to increasing use and speed of automation in processing operations. Growing awareness of food safety concerns has helped add food safety inspection to the list of tasks that automated computer vision can assist. Researc...

  6. Impact of porcine epidemic diarrhea on performance of growing pigs.

    Directory of Open Access Journals (Sweden)

    Julio Alvarez

    Full Text Available The impact of porcine epidemic diarrhea virus (PEDv infection on the US pork industry has mainly been attributed to the mortality that it causes in suckling piglets, and, consequently, much effort has been invested in the quantification of its effect in sow farms. However, no information on the performance of surviving pigs that were exposed to the PEDv as piglets is available. Here, a retrospective cohort study to evaluate the impact of porcine epidemic diarrhea virus (PEDv infection on growing pigs' performance, as indicated by mortality, average daily gain (ADG, average daily feed intake (ADFI, and feed conversion ratio (FCR was performed using production records from weaned pigs in nursery and wean-to-finish sites from sow farms that became PEDv-infected between May 2013 and June 2014. Production records from the first batch of growing pigs weaned in infected flows after the PEDv outbreak ("infected batches" were compared with those from pigs weaned within the previous 14 to 120 days ("control batches". Performance records from infected and control batches, paired by flow, were compared using non-parametric paired tests. Mortality, ADG and FCR were significantly different in PEDv-positive (infected compared with PEDv-negative (control batches, with a mean increase of mortality and FCR of 11% and 0.5, respectively, and a decrease of ADG of 0.16 lb/day. Our results demonstrate a poorer performance of growing pigs weaned after a PEDv outbreak compared with those weaned within the previous 14-120 days, suggesting that in addition to the mortality induced by PEDv in suckling pigs, the disease also impairs the performance of surviving pig. These findings help to quantify the impact of PEDv infection in the US and, ultimately, contribute to efforts to quantify the cost-effectiveness of disease prevention and control measures.

  7. Impact of porcine epidemic diarrhea on performance of growing pigs.

    Science.gov (United States)

    Alvarez, Julio; Sarradell, Javier; Morrison, Robert; Perez, Andres

    2015-01-01

    The impact of porcine epidemic diarrhea virus (PEDv) infection on the US pork industry has mainly been attributed to the mortality that it causes in suckling piglets, and, consequently, much effort has been invested in the quantification of its effect in sow farms. However, no information on the performance of surviving pigs that were exposed to the PEDv as piglets is available. Here, a retrospective cohort study to evaluate the impact of porcine epidemic diarrhea virus (PEDv) infection on growing pigs' performance, as indicated by mortality, average daily gain (ADG), average daily feed intake (ADFI), and feed conversion ratio (FCR) was performed using production records from weaned pigs in nursery and wean-to-finish sites from sow farms that became PEDv-infected between May 2013 and June 2014. Production records from the first batch of growing pigs weaned in infected flows after the PEDv outbreak ("infected batches") were compared with those from pigs weaned within the previous 14 to 120 days ("control batches"). Performance records from infected and control batches, paired by flow, were compared using non-parametric paired tests. Mortality, ADG and FCR were significantly different in PEDv-positive (infected) compared with PEDv-negative (control) batches, with a mean increase of mortality and FCR of 11% and 0.5, respectively, and a decrease of ADG of 0.16 lb/day. Our results demonstrate a poorer performance of growing pigs weaned after a PEDv outbreak compared with those weaned within the previous 14-120 days, suggesting that in addition to the mortality induced by PEDv in suckling pigs, the disease also impairs the performance of surviving pig. These findings help to quantify the impact of PEDv infection in the US and, ultimately, contribute to efforts to quantify the cost-effectiveness of disease prevention and control measures.

  8. Industrial Performance of the Renewable Resources Industry in China

    Directory of Open Access Journals (Sweden)

    Dong Zhou

    2015-08-01

    Full Text Available Promoting the development of renewable resources industry is an effective way to solve the problems of resources shortage and environmental pollution in China. In this paper, studies have found that “market structure” and “ownership structure”, namely “double structure”, is an important explanatory variable that affects industrial performance according to the “structure-conduct-performance” paradigm. Literature reviews have shown that large state-owned enterprises are playing an important role in improving the industrial performance because of the advantage in technology and capital. However, this paper analyzed the performance of China’s renewable resource industry from two aspects—the overall industrial development and the listed companies, from which two conclusions have drawn: (1 Above a designated size, private enterprises have the greatest contribution, while the contribution of state-owned and foreign-funded enterprises is different; (2 The main reason for the high positive growth rate of total factor productivity between 2009 and 2013 is the rapid growth of technological progress such as the improvement of production processes and manufacturing skills, rather than the promotion of management, system, or polices.

  9. DYNAMICS OF SOCIAL STRATIFICATION FROM INDUSTRIALISM TO POST-INDUSTRIALISM

    Directory of Open Access Journals (Sweden)

    Anastasiya Valerevna Slobodskaya

    2014-12-01

    Full Text Available In a situation of transition from industrial to post-industrial stage social structure development of society undergoes significant changes. This article discusses the new forms of social stratification, analyzes the causes of the transformation of social processes. According to the author, the changes of social processes are the result of transition to the information economy and production system. The article presents the rationale of the new forms of social stratification. Access to information and the level of professional competence are the basis of social stratification and class division. The complexity of predicting changes of class structure caused rapid updating of transition from one stage of social development to another. The analysis revealed heterogeneity and contradictory scientific views on the class structure of the post-industrial society. The author identifies and organizes the three groups of research positions of class stratification. The basis of the study carried out by the classification serves economic and value, political, scientific and technical specificity of the post-industrial society. The paper contributes to the study of the social structure in post-industrial society advances grounds to predict further transformation of the class system.

  10. Perspective on how laser-ablated particles grow in liquids

    Science.gov (United States)

    Zhang, DongShi; Liu, Jun; Liang, ChangHao

    2017-07-01

    Laser ablation in liquids has emerged as a new branch of nanoscience for developing various nanomaterials with different shapes. However, how to design and control nanomaterial growth is still a challenge due to the unique chemical-physical process chain correlated with nanomaterial nucleation and growth, including plasma phase (generation and rapid quenching), gas (bubble) phase, and liquid phase. In this review, through summarizing the literature about this topic and comparing with the well-established particle growth mechanisms of the conventional wet chemistry technique, our perspective on the possible nanoparticle growth mechanisms or routes is presented, aiming at shedding light on how laser-ablated particles grow in liquids. From the microscopic viewpoint, the nanoparticle growth contains six mechanisms, including LaMer-like growth, coalescence, Ostwald ripening, particle (oriented) attachment, adsorbate-induced growth and reaction-induced growth. For each microscopic growth mechanism, the vivid growth scenes of some representative nanomaterials recorded by TEM and SEM measurements are displayed. Afterwards, the scenes from the macroscopic viewpoint for the large submicro- and micro-scale nanospheres and anisotropic nanostructures formation and evolution from one nanostructure into another one are presented. The panorama of how diverse nanomaterials grow during and after laser ablation in liquids shown in this review is intended to offer a overview for researchers to search for the possible mechanisms correlated to their synthesized nanomaterials, and more expectation is desired to better design and tailor the morphology of the nanocrystals synthesized by LAL technique.

  11. Defense Industrial Base (DIB): Munitions Realignment for 2020

    Science.gov (United States)

    2013-03-01

    ammunition continued until WWII. Technological improvements in weapons and ammunition design , doctrinal changes, and growing supplies of obsolete...munitions DIB by companies like Coca Cola , Quaker Oats, and Eastman Kodak. As industrial mobilization quickly increased, the requirements decreased...between 2014 and 2020 should enable planners to predict future demands while measuring the effects of growing transportation costs. The increased

  12. Progress in Industrial Mathematics at ECMI 2000

    CERN Document Server

    Capasso, Vincenzo; Greco, Antonio

    2002-01-01

    The European Consortium for Mathematics in Industry (ECMI) was founded in 1986 by leading groups of mathematicians in Europe for the following scopes: i) direct involvement of mathematicians in R&D activities; ii) international cooperation at a European scale; iii) education of industrial mathematicians to meet the growing demand for such experts. ECMI 2000 shows that ECMI has offered a unique example of effective international cooperation thanks to the financial support of the European Framework programmes. In particular they have helped ECMI establishing a set of Special Interest Groups to favour interaction with industry . This volume includes minisymposia about their activities, in particular microelectronics, glass, polymers, finance, traffic, and textiles. Applied mathematicians and other professionals working in academia or industry will find the book to be a useful and stimulating source of mathematical applications related to industrial problems.

  13. Interest grows in African oil and gas opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Knott, D.

    1997-05-12

    As African countries continue a slow drift towards democratic government and market economics, the continent is increasingly attractive to international oil and gas companies. Though Africa remains politically diverse, and its volatile politics remains a major barrier to petroleum companies, a number of recent developments reflect its growing significance for the industry. Among recent projects and events reflecting changes in Africa: oil and gas exporter Algeria has invited foreign oil companies to help develop major gas discoveries, with a view to boosting exports to Europe; oil and gas producer Egypt invited foreign companies to explore in the Nile Delta region, and the result appears to be a flowering world scale gas play; west African offshore exploration has entered deep water and new areas, and a number of major projects are expected in years to come; Nigeria`s reputation as a difficult place to operate has been justified by recent political and civil events, but a long-planned liquefied natural gas (LNG) export plant is being built there; South Africa, which has returned to the international scene after years of trade isolation because of apartheid, is emerging as a potential driver for energy industry schemes throughout the continent. Activities are discussed.

  14. [Ecological industry chain designing of making paper industry: turning pollution industry into ecological industry].

    Science.gov (United States)

    Yin, Qi; Piao, Hefu; Liu, Bingyue

    2003-05-01

    This paper gave a definition of ecological industry chain of renewal resources, and according to this definition designed the ecological industry chain of paper making industry of China; presented a basic principle of designing and ecological industry chain of renewal resources and five necessary conditions to establish an ecological industry chain of renewal resources, i.e. imitating the ecological closed-circuit system, increasing stock of renewal resources, getting benefits from resource productivity, developing long-run social demand and engaging in systematic innovation. It was found that the ecological industry chain of paper making industry was a representative example of ecological industry chain of renewal resources. The ecological industry chain of paper making industry solved three difficult constrain problems and offered an effective way to change the paper making industry of China from pollution industry into ecological industry.

  15. Research on Risks and Forecasting Countermeasures of Hainan Banana Industry

    OpenAIRE

    Liu, Yan-Qun; Zeng, Xiao-Hong; Fang, Jia

    2011-01-01

    Based on the overviews of the current conditions of Hainan banana industry, the research makes an analysis of the risks faced by Hainan banana industry. They are respectively marketing risks, natural risks, information risks and production risks. In order to promote a sustainable and rapid development of Hainan banana industry, Countermeasures are proposed in the research. The first is to strengthen the leading organization of forecasting mechanisms on banana industry. The second is to establ...

  16. Towards better metrics and policymaking for seed system development: Insights from Asia's seed industry.

    Science.gov (United States)

    Spielman, David J; Kennedy, Adam

    2016-09-01

    Since the 1980s, many developing countries have introduced policies to promote seed industry growth and improve the delivery of modern science to farmers, often with a long-term goal of increasing agricultural productivity in smallholder farming systems. Public, private, and civil society actors involved in shaping policy designs have, in turn, developed competing narratives around how best to build an innovative and sustainable seed system, each with varying goals, values, and levels of influence. Efforts to strike a balance between these narratives have often played out in passionate discourses surrounding seed rules and regulations. As a result, however, policymakers in many countries have expressed impatience with the slow progress on enhancing the contribution of a modern seed industry to the overarching goal of increasing agricultural productivity growth. One reason for this slow progress may be that policymakers are insufficiently cognizant of the trade-offs associated with rules and regulations required to effectively govern a modern seed industry. This suggests the need for new data and analysis to improve the understanding of how seed systems function. This paper explores these issues in the context of Asia's rapidly growing seed industry, with illustrations from seed markets for maize and several other crops, to highlight current gaps in the metrics used to analyze performance, competition, and innovation. The paper provides a finite set of indicators to inform policymaking on seed system design and monitoring, and explores how these indicators can be used to inform current policy debates in the region.

  17. EDP human resource development for the 21st century mineral industry management

    Energy Technology Data Exchange (ETDEWEB)

    Ramani, R.V. [Pennsylvania State University, Pennsylvania, PA (United States)

    1994-12-31

    In this paper, the state of the art in computer applications in the mineral industry is briefly reviewed, and the challenges and opportunities for the future are outlined. The technological, business and manpower trends for the future are projected. The implications for mine planning, designing and operations and the role of computers and manpower training are stressed. The key to maintaining and improving on the impressive gains of the recent past in the mineral industry is training and motivating the human resources to exploit fully the modern electronic data processing (EDP) developments for a future in which the quality of the mineral resources, the competition from international producers, and the pressures of substitution, and environmental conservation are likely to be more intense than ever before. There is a clear need worldwide to learn new skills and professions to tap into the growing computer-oriented society and work place. There is general consensus that the mining industry, like much of American industry, is constrained by shortage of trained people in achieving more rapid incorporation of the merging EDP technological advancements for enlightened management. The findings in this paper are relevant to the Indian scene as well because the merging computer and tele-power technologies have already compressed space and time in a number of ways which could not have been imagined a few short years ago. 5 figs.

  18. Characterizing the air quality in the vicinity of a fast-growing Asian airport

    Science.gov (United States)

    Wang, C.; Juang, J.

    2010-12-01

    Many studies have shown that air quality in the vicinity of major airports could be directly influenced by aircraft emissions, airport activities, and other forms of intense transportation in proximity to airports. There are two types of pollutants emitted within the confines of airports: one is directly emitted from aircraft engines, and the other is from ground support equipment (GSE). Such pollutants include aromatic hydrocarbon, ultrafine particles (UFP) , black carbon (BC) , nitrogen oxides, carbon monoxides, and sulfides and could immiately impact the air quality in areas downwind. Although the impact of airport emissions on surrounding communities has been studied in some major airports in North America and Europe, scant attention has been paid to airport pollution issues in Asia despite the surging growth of air travel and of airports. Commercial air traffic in Taiwan has been dramatically growing in the last two decades because of rapid economic growth and is expected to continue surging into the next decades due to increasing trade and travel with China and other countries. In this study, the air quality in the vicinity of Taiwan’s Taoyuan International Airport (TPE Airport) is analyzed to further characterize air quality in the region of a fast-growing Asian airport. Monitoring data from the Taiwanese Environmental Protection Administration (EPA) is used in the study to investigate long-term trends in air quality. The first step of this research is to analyze the data from six stations close to TPE Airport during the last ten years and to filter the attributes (wind field, geography, and so on) which could impact that air quality. Second, we characterize the relationship between data from different monitoring stations by using cluster analysis and then use the air pollution model (Industrial Source Complex-ISC3 and Cal-Puff) to identify why serious pollution events occur. Finally, we use model binds with a GIS system containing population-activity and

  19. Learning Topologies with the Growing Neural Forest.

    Science.gov (United States)

    Palomo, Esteban José; López-Rubio, Ezequiel

    2016-06-01

    In this work, a novel self-organizing model called growing neural forest (GNF) is presented. It is based on the growing neural gas (GNG), which learns a general graph with no special provisions for datasets with separated clusters. On the contrary, the proposed GNF learns a set of trees so that each tree represents a connected cluster of data. High dimensional datasets often contain large empty regions among clusters, so this proposal is better suited to them than other self-organizing models because it represents these separated clusters as connected components made of neurons. Experimental results are reported which show the self-organization capabilities of the model. Moreover, its suitability for unsupervised clustering and foreground detection applications is demonstrated. In particular, the GNF is shown to correctly discover the connected component structure of some datasets. Moreover, it outperforms some well-known foreground detectors both in quantitative and qualitative terms.

  20. Systems Biology of Industrial Microorganisms

    Science.gov (United States)

    Papini, Marta; Salazar, Margarita; Nielsen, Jens

    The field of industrial biotechnology is expanding rapidly as the chemical industry is looking towards more sustainable production of chemicals that can be used as fuels or building blocks for production of solvents and materials. In connection with the development of sustainable bioprocesses, it is a major challenge to design and develop efficient cell factories that can ensure cost efficient conversion of the raw material into the chemical of interest. This is achieved through metabolic engineering, where the metabolism of the cell factory is engineered such that there is an efficient conversion of sugars, the typical raw materials in the fermentation industry, into the desired product. However, engineering of cellular metabolism is often challenging due to the complex regulation that has evolved in connection with adaptation of the different microorganisms to their ecological niches. In order to map these regulatory structures and further de-regulate them, as well as identify ingenious metabolic engineering strategies that full-fill mass balance constraints, tools from systems biology can be applied. This involves both high-throughput analysis tools like transcriptome, proteome and metabolome analysis, as well as the use of mathematical modeling to simulate the phenotypes resulting from the different metabolic engineering strategies. It is in fact expected that systems biology may substantially improve the process of cell factory development, and we therefore propose the term Industrial Systems Biology for how systems biology will enhance the development of industrial biotechnology for sustainable chemical production.

  1. Cultivation of microalgae in industrial wastewaters

    DEFF Research Database (Denmark)

    van Wagenen, Jonathan Myerson

    that has many potential uses. Unfortunately, the current high costs of cultivation have limited the development and exploitation of such systems, resulting in only a few full-scale algae wastewater treatment installations and a small industry based mostly around food and pigments. This thesis contributes...... to autotrophic controls. Industrial wastewater was used as cultivation medium of Chlorella sorokiniana. The culture was able to grow at high rates upto a density of 4 g L-1. The deceleration-stat technique was used to create a series of pseudo-steady states to give information about the expected results...... to a growing body of knowledge with the aim to make algae cultivation viable for the production of sustainable products. Specific contributions include: improvement in the methods of screening the growth potential of different microalgae species; identification of an industrial wastewater that allows good...

  2. Adaptables in the post-industrial society

    DEFF Research Database (Denmark)

    Stylsvig Madsen, Ulrik

    2006-01-01

    How can contemporary industrialized production meet the requirements of a growing complexity and dynamism in a global society? In a society affected by globalization and the never-ending flow of information, the need for artefacts to reinforce the identity of organizations and individuals...... is growing. The mission of architecture is then to form a framework of identity for the particular function or individual, a framework capable of distinguishing the function / the individual from one another and from the surrounding society. Industrial production within the construction business is therefore...... met with increasing demands for individual solutions. The question then is how this challenge is met in the best way by industrialized production, technologically (products/solutions) as well as theoretically (conceptual approach)...

  3. Market Structure, Financial Dependence and Industrial Growth: Evidence from the Banking Industry in Emerging Asian Economies.

    Science.gov (United States)

    Khan, Habib Hussain; Ahmad, Rubi Binit; Gee, Chan Sok

    2016-01-01

    In this study, we examine the role of market structure for growth in financially dependent industries from 10 emerging Asian economies over the period of 1995-2011. Our approach departs from existing studies in that we apply four alternative measures of market structure based on structural and non-structural approaches and compare their outcomes. Results indicate that higher bank concentration may slow down the growth of financially dependent industries. Bank competition on the other hand, allows financially dependent industries to grow faster. These findings are consistent across a number of sensitivity checks such as alternative measures of financial dependence, institutional factors (including property rights, quality of accounting standards and bank ownership), and endogeneity consideration. In sum, our study suggests that financially dependent industries grow more in more competitive/less concentrated banking systems. Therefore, regulatory authorities need to be careful while pursuing a consolidation policy for banking sector in emerging Asian economies.

  4. Market Structure, Financial Dependence and Industrial Growth: Evidence from the Banking Industry in Emerging Asian Economies

    Science.gov (United States)

    Khan, Habib Hussain; Ahmad, Rubi Binit; Gee, Chan Sok

    2016-01-01

    In this study, we examine the role of market structure for growth in financially dependent industries from 10 emerging Asian economies over the period of 1995–2011. Our approach departs from existing studies in that we apply four alternative measures of market structure based on structural and non-structural approaches and compare their outcomes. Results indicate that higher bank concentration may slow down the growth of financially dependent industries. Bank competition on the other hand, allows financially dependent industries to grow faster. These findings are consistent across a number of sensitivity checks such as alternative measures of financial dependence, institutional factors (including property rights, quality of accounting standards and bank ownership), and endogeneity consideration. In sum, our study suggests that financially dependent industries grow more in more competitive/less concentrated banking systems. Therefore, regulatory authorities need to be careful while pursuing a consolidation policy for banking sector in emerging Asian economies. PMID:27490847

  5. State, Institutions and Industrial Development

    DEFF Research Database (Denmark)

    Lauridsen, Laurids Sandager

    What happens when developing countries can no longer grow by simply exploiting their existing comparative advantages in natural resources or cheap labour? Many middle income countries are situated in a sandwiched position between on the one hand competitive pressure from lower-wage countries...... and on the other hand competition from innovators in the advanced capitalist countries. To climb onwards to higher income levels they must deepen and upgrade their industries. The dissertation is based on the assumption that this transition from low to high value-added activities does not take place ‘automatically......' as a result of the working of market forces or of the choices and activities of transnational companies. Hence it examines the role of the state in such late-industrial transformation processes in Taiwan and Thailand. Most scholars have dealt with this issue from the perspective of trade and have studied...

  6. State, Institutions and Industrial Development

    DEFF Research Database (Denmark)

    Lauridsen, Laurids Sandager

          What happens when developing countries can no longer grow by simply exploiting their existing comparative advantages in natural resources or cheap labour? Many middle income countries are situated in a sandwiched position between on the one hand competitive pressure from lower-wage countries...... and on the other hand competition from innovators in the advanced capitalist countries. To climb onwards to higher income levels they must deepen and upgrade their industries. The dissertation is based on the assumption that this transition from low to high value-added activities does not take place ‘automatically......’ as a result of the working of market forces or of the choices and activities of transnational companies. Hence it examines the role of the state in such late-industrial transformation processes in Taiwan and Thailand. Most scholars have dealt with this issue from the perspective of trade and have studied...

  7. Efficient Communication Management in a Growing Organisation

    OpenAIRE

    Alakotila, Susanna

    2017-01-01

    The purpose of this thesis is to analyse the importance of organisational communication and to explain how communication should be managed for it to be effective. Two fast-growing companies were interviewed for the thesis, who give entail on how they have managed communication regarding the organisational changes. Organisational communication is divided into external, stakeholder and internal communication in this study. With the help of interviews from two case companies, researcher offers r...

  8. Transformational Leadership Which Can Grow Organizational Commitment

    OpenAIRE

    Silalahi, Betty Yuliani

    2008-01-01

    A meta-analysis consist of 45 studies from 20 articles and 20860 subjects evaluated the correlation between Transformational leadership and Organizational commitment. Summary analysis provided support for the hypothesis that transformational leadership has a correlation on organizational commitment. The purpose of the study is to analyzed the data from the primer study and to support the hypothesis or refuse from the studies. Result indicated that transformational leadership can grow organiza...

  9. Shape of the growing front of biofilms

    Science.gov (United States)

    Wang, Xin; Stone, Howard A.; Golestanian, Ramin

    2017-12-01

    The spatial organization of bacteria in dense biofilms is key to their collective behaviour, and understanding it will be important for medical and technological applications. Here we study the morphology of a compact biofilm that undergoes unidirectional growth, and determine the condition for the stability of the growing interface as a function of the nutrient concentration and mechanical tension. Our study suggests that transient behaviour may play an important role in shaping the structure of a biofilm.

  10. Growing Role of Retail in Distribution Channels

    OpenAIRE

    Ishak Mesic

    2011-01-01

    This article aims to demonstrate the growing role of retail trade (retail) in the channels of distribution of goods both in domestic and international markets. Technical-technological development has provided great opportunities for all production of material goods, so that the focus of problem in the economic possibilities of playing shifted from production to sales opportunities, or consumption. The ultimate consumers and their needs and requirements have become a central area of study, bas...

  11. GRoW Buffalo Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Bohm, Martha [Univ. at Buffalo, NY (United States)

    2016-04-17

    This document provides final reporting on the GRoW Home, University at Buffalo's entry to the 2015 Solar Decathlon competition in Irvine, CA. The report summarizes fundraising efforts, documents media outreach, lists online presence, analyzes the organizer's communication, describes post-competition life of the house and future employment plans for student team members. Last, it suggests improvements for future decathlons.

  12. Intrapreneurship: growing a successful hospital diversification strategy.

    Science.gov (United States)

    Hannon, F

    1987-10-01

    The recent upheaval in the health care industry has left administrators scrambling after strategies that will ensure their organizations' survival. The author discusses Affiliated Healthcare Systems' successful use of a diversification strategy. Special attention is given to explaining how other organizations might use this system's experience to reduce the risks and increase the rewards inherent in this strategic alternative.

  13. Growing Our Workforce through Business and Education

    Science.gov (United States)

    Pauley, Douglas R.; Davidchik, Daniel

    2010-01-01

    In 2004, Central Community College (CCC) established the Mechatronics Education Center (MEC), a regional center of excellence, to help the state address the shortage of skilled technicians in the area of industrial automation. The MEC addresses the needs of the current and future workforce through the implementation of its three main components:…

  14. Pallets: A Growing Source of Recycled Wood

    Science.gov (United States)

    Robert J. Bush; Vijay S. Reddy; Philip A. Araman

    1997-01-01

    Considerable volumes of solid hardwoods, solid softwoods, and wood panels are used to manufacture pallets and containers in the United States. Increasing quantities of these materials are recovered from the waste stream for reuse and recycling. Two important groups involved in this recovery and recycling are firms in the pallet industry (SIC 2448) and landfill...

  15. ROV role grows as depths increase

    Energy Technology Data Exchange (ETDEWEB)

    Redden, J.

    1984-09-01

    The use of remotely operated vehicles (ROVs) in offshore oil and gas exploration is discussed. One of the most promising segments of the industry for ROVs is in the area of drilling support. The ROV is the only viable tool for subsea operations as drilling operations move into deepwater areas. The operation and capabilities of ROVs are discussed.

  16. Knowledge Discovery from Growing Social Networks

    Science.gov (United States)

    2009-12-24

    University, Aichi , Japan 4motoda@ar.sanken.osaka-u.ac.jp, Osaka Univesity, Osaka, Japan Abstract We address the problem of ranking influential nodes in...Computer Science Chubu University Aichi 487-8501, Japan nakano@cs.chubu.ac.jp Hiroshi Motoda Institute of Scientific and Industrial Research Osaka

  17. Industrial waste and pollution in Mongolia

    Energy Technology Data Exchange (ETDEWEB)

    Dolgormaa, L. [Minstry of Nature and Environment, Ulaanbaatar (Mongolia)

    1996-12-31

    This paper very briefly outlines hazardous waste management issues, including regulations, in Mongolia. Air, water, and soil pollutants are identified and placed in context with climatic, social, and economic circumstances. The primary need identified is technology for the collection and disposal of solid wastes. Municipal waste problems include rapid urbanization and lack of sanitary landfills. Industrial wastes of concern are identified from the mining and leather industries. 4 refs., 2 tabs.

  18. Multi-Criteria Indicator for Sustainability Rating in Suppliers of the Oil and Gas Industries in Brazil

    Directory of Open Access Journals (Sweden)

    José Felipe Figueiredo Barata

    2014-02-01

    Full Text Available The necessity of sustainability evaluation is rapidly growing alongside the expansion of civilization. Likewise, the supply chain suitability improvement is a need that has arisen in the petroleum industry, especially as it is responsible for the most part of CO2 emissions in the atmosphere. The modeling of this kind of problem deals with multiple criteria evaluations. This paper proposes an original multiple-criteria based approach to classifying the degree of organizational sustainability. This proposal was applied to evaluate a representative set of companies, which are suppliers of the Brazilian petroleum industry. The data collection was supported by a questionnaire. The results highlight that the studied companies have not yet reached an advanced level of maturity in the sustainability context. In a comprehensive vision of sustainability based on Triple Bottom Line (TBL, these companies are either in the initial stage or in the implementation phase of the sustainability practices.

  19. Quality assessment of baby food made of different pre-processed organic raw materials under industrial processing conditions.

    Science.gov (United States)

    Seidel, Kathrin; Kahl, Johannes; Paoletti, Flavio; Birlouez, Ines; Busscher, Nicolaas; Kretzschmar, Ursula; Särkkä-Tirkkonen, Marjo; Seljåsen, Randi; Sinesio, Fiorella; Torp, Torfinn; Baiamonte, Irene

    2015-02-01

    The market for processed food is rapidly growing. The industry needs methods for "processing with care" leading to high quality products in order to meet consumers' expectations. Processing influences the quality of the finished product through various factors. In carrot baby food, these are the raw material, the pre-processing and storage treatments as well as the processing conditions. In this study, a quality assessment was performed on baby food made from different pre-processed raw materials. The experiments were carried out under industrial conditions using fresh, frozen and stored organic carrots as raw material. Statistically significant differences were found for sensory attributes among the three autoclaved puree samples (e.g. overall odour F = 90.72, p baby food.

  20. Number of Single-Sex Schools Growing

    Science.gov (United States)

    Barak, Tal

    2004-01-01

    The U.S. Department of Education's office for civil rights has proposed amending the regulations governing Title IX of the Education Amendments of 1972--which prohibits sex discrimination in programs that receive federal money--to allow more flexibility in offering single-sex schools or classes. This article discusses the rapid growth of…

  1. The Research of Scrapped Automobiles Recycling and Disassembling Industry Development Based on Auto Industry Chain

    OpenAIRE

    linhua Pang; Guilin Wen

    2015-01-01

    The number of China’s scrapped car is on an explosively growing trend, and the development of scrapped car recycling industry has a golden prospect. The current scrapped car recycling system is not perfect in our country, because related industries driven by market develop slowly, and there are some outstanding problems such as potential safety risks, environmental pollution and resource waste. The paper analyzes and studies the existing problems and countermeasures to investigate the develop...

  2. Rapid Airplane Parametric Input Design (RAPID)

    Science.gov (United States)

    Smith, Robert E.

    1995-01-01

    RAPID is a methodology and software system to define a class of airplane configurations and directly evaluate surface grids, volume grids, and grid sensitivity on and about the configurations. A distinguishing characteristic which separates RAPID from other airplane surface modellers is that the output grids and grid sensitivity are directly applicable in CFD analysis. A small set of design parameters and grid control parameters govern the process which is incorporated into interactive software for 'real time' visual analysis and into batch software for the application of optimization technology. The computed surface grids and volume grids are suitable for a wide range of Computational Fluid Dynamics (CFD) simulation. The general airplane configuration has wing, fuselage, horizontal tail, and vertical tail components. The double-delta wing and tail components are manifested by solving a fourth order partial differential equation (PDE) subject to Dirichlet and Neumann boundary conditions. The design parameters are incorporated into the boundary conditions and therefore govern the shapes of the surfaces. The PDE solution yields a smooth transition between boundaries. Surface grids suitable for CFD calculation are created by establishing an H-type topology about the configuration and incorporating grid spacing functions in the PDE equation for the lifting components and the fuselage definition equations. User specified grid parameters govern the location and degree of grid concentration. A two-block volume grid about a configuration is calculated using the Control Point Form (CPF) technique. The interactive software, which runs on Silicon Graphics IRIS workstations, allows design parameters to be continuously varied and the resulting surface grid to be observed in real time. The batch software computes both the surface and volume grids and also computes the sensitivity of the output grid with respect to the input design parameters by applying the precompiler tool

  3. Exposure to vibrations in wine growing

    Directory of Open Access Journals (Sweden)

    Domenico Pessina

    2013-09-01

    Full Text Available Apart the winter period, the activity in specialized agricultural cultivations (i.e. wine- and fruit-growing is distributed for a long period of the year. Some tasks, such as pesticide distribution, are repeated several times during the growing season. On the other hand, mechanization is one of the pillars on which is based the modern agriculture management. As a consequence, in wine growing the tractor driver has to be considered a worker potentially subjected to high level of vibrations, due to the poor machinery conditions often encountered, and sometimes to the rough soil surface of the vineyard combined with the high travelling speed adopted in carrying out many operations. About vibrations, the Italian Decree 81/08 basically refers to the European Directive 2002/44/CE, that provides some very strict limits of exposure, both for whole body and hand-arm districts. In Oltrepo pavese, a large hilly area located the south part of the Pavia province (Lombardy - Italy wine growing is the main agricultural activity; for this reason, a detailed survey on the vibration levels recorded at the tractor driver’s seat was carried out, in order to ascertain the real risk to which the operators are exposed. The activity in wine growing has been classified into 6 groups of similar tasks, as follows: 1. canopy management: pruning, trimming, binding, stripping, etc.; 2. soil management: harrowing, hoeing, subsoiling etc.; 3. inter-row management: chopping of pruning , pinching, grass mowing, etc.; 4. crop protection: pesticides and fungicides distribution, sulfidation, foliar fertilization, etc.; 5. grape harvesting: manual or mechanical; 6. transport: from the vineyard to the cellar. For each group of tasks, the vibration levels on 3 the traditional axes (x, y and z were recorded, and then an exposure time was calculated for each of them, in order to ascertain the risk level in comparison to what provided by the dedicated standard. Finally, a detailed

  4. Entrepreneurial Learning a Practical Model from the Creative Industries

    Science.gov (United States)

    Rae, David

    2004-01-01

    Explores how entrepreneurial capability and identity are learned in the creative and media industries. This sector is of growing social and economic importance, and the majority of its employment and commercial activity takes place within small businesses. However, entrepreneurship in the creative industries and the related development of…

  5. The tomato industry in northern Ghana: Production constraints and ...

    African Journals Online (AJOL)

    Entrepreneurs in the northern Ghana tomato industry are taking advantage of recent government policies to promote agribusiness. The competitiveness of the industry is assessed in this paper and possible pathways to empower smallholder farmers to grow from supply chain actors into value chain integrators and possibly ...

  6. Critical success factors for reverse logistics in Indian industries

    DEFF Research Database (Denmark)

    Mangla, Sachin Kumar; Govindan, Kannan; Luthra, Sunil

    2016-01-01

    Industries face significant pressures to enact eco-friendly practices in their supply chain due to the constraints of natural resources and growing ecological awareness among customers. Reverse logistics (RL) has been considered as a systematic approach for industries to improve their environmental...

  7. An Assessment of Industrial Customers' Satisfaction at Ethiopian ...

    African Journals Online (AJOL)

    The survival of any organization in a highly competitive environment depends on its ability to provide the best service quality to its existing customers as the quality of service is a key factor in the success of any organization. Though a stable supply of enough energy is a must for industrialization, Ethiopia's growing industrial ...

  8. Chemicals Industry Vision

    Energy Technology Data Exchange (ETDEWEB)

    none,

    1996-12-01

    Chemical industry leaders articulated a long-term vision for the industry, its markets, and its technology in the groundbreaking 1996 document Technology Vision 2020 - The U.S. Chemical Industry. (PDF 310 KB).

  9. Water Quality Assessment of Streams and Wetlands in a Fast Growing East African City

    Directory of Open Access Journals (Sweden)

    Niels De Troyer

    2016-03-01

    Full Text Available The combination of rapid urbanization, industrialization, population growth, and low environmental awareness poses a major threat to worldwide valuable freshwater resources, which provide important ecosystem services to humans. There is an urgent need to monitor and assess these resources, as this information is indispensable for sustainable decision-making and management. In this context, we analyzed the chemical and ecological water quality of the riverine environment of a fast growing city in Southwest Ethiopia for which we proposed possible remediation options that were evaluated with an empirical model. The chemical and ecological water quality was assessed at 53 sampling locations using the oxygen Prati index and the ETHbios, which is a biotic index based on macroinvertebrates. In addition, a microbiological analysis was performed to estimate the degree of fecal contamination. Finally, we analyzed the relationship between the oxygen content and the organic pollution to simulate the effect of organics removal from waste streams on the chemical water quality. Our results showed that the average values for dissolved oxygen (4.2 mg DO·L−1 and nutrients (0.9 mg oPO43−·L−1 and 12.8 mg TAN·L−1 exceeded international standards. Moreover, high turbidity levels revealed that land erosion is a severe problem in the region. Along the rivers, a significant increase in oxygen consumption and in nutrient concentrations was observed, indicating organic pollution originating from different diffuse and point sources of pollution. The lack of proper sanitation also led to exceedingly high abundances of fecal coliforms in the surface water (>320 MPN·mL−1. However, fecal contamination was strongly reduced (>92% after the polluted river water passed Boye wetland, indicating the purification potential of natural wetlands and the importance of conserving and protecting those ecosystems. The simulation results of the model showed that water quality

  10. Rapid shallow breathing

    Science.gov (United States)

    ... the smallest air passages of the lungs in children ( bronchiolitis ) Pneumonia or other lung infection Transient tachypnea of the newborn Anxiety and panic Other serious lung disease Home Care Rapid, shallow breathing should not be treated at home. It is ...

  11. Rapid Strep Test

    Science.gov (United States)

    ... worse than normal. Your first thoughts turn to strep throat. A rapid strep test in your doctor’s office ... your suspicions.Viruses cause most sore throats. However, strep throat is an infection caused by the Group A ...

  12. Growing Defense Production in Newly Industrializing Countries: Impact on U.S. National Security.

    Science.gov (United States)

    1983-05-01

    Journal, July 1982, p. 79. 35As quoted: Amartya Sen , "How is India Doing?" The New York Review of ooks, December 16, 1982, p. 41. 36H. C. Sarin...profitably use for improving their economic and social conditions. 5 Shuey maintains that the older arms producers are in large part responsible for these...struggle for equity in world politics. The arms race in Latin America may be due more to issues of status and social justice (i.e., human dignity) than to

  13. Clever heating concept for a fast-growing industrial complex; Kluges Heizkonzept fuer ein starkes Wachstum

    Energy Technology Data Exchange (ETDEWEB)

    Stadelmann, M.

    2008-07-01

    This article takes a look at the decentralised, natural gas and heating-oil fired heating system employed in the facilities of the Stadler Rail company in Bussnang, Switzerland. This successful company produces railcars, multi-element suburban trains, narrow-gauge trains for regional carriers, cog-railway vehicles and trams. The heating of the production facilities and spray-painting cabins is described. The energy for the heating units is basically provided using natural gas. The gas is supplied at a reduced price on an interruptible basis: Heating-oil fired systems provide a back-up when the gas supply is interrupted. Space heating in the construction halls and the heating of the company's offices are described. Also, the installations necessary for the reduction of paint-drying time in the spray-painting cabins are described.

  14. A hybrid replenishment model, the best fit in fast growing industries

    NARCIS (Netherlands)

    Hartevelt, R.

    2011-01-01

    During the design supply chain control processes, balancing cost versus service plays an important role. To select the most suitable replenishment strategy is the main enabler in reaching the goal of finding the optimal balance. In this article a framework is developed which will help to select the

  15. FCS Academic Programs and Financial Planning Industry: Partnering to Meet Growing Demand

    Science.gov (United States)

    Lytton, Ruth H.; Grable, John E.

    2004-01-01

    Since the turn of the 20th century and the coalescence of home economics, the use of money within the household has been an issue of study. Now known as family and consumer sciences (FCS), the profession can boast of a century of financial education of youth and adults in a variety of formal and informal settings. In recent decades, financial…

  16. From frill to fundamental: The growing importance of science to the tree care industry

    Science.gov (United States)

    E.G. McPherson

    2009-01-01

    One goal of the ISA’s Science and Research Committee is to increase appreciation and investment in research. This article will explain why your commitment to science and research is vital to your professional growth and the future of arboriculture and urban forestry.

  17. The growing importance of geo-scientists in the global oil field service industry

    Science.gov (United States)

    Schwartz, L.

    2005-12-01

    Schlumberger is often seen as a physics, chemistry and engineering company whose primary businesses are directional drilling, well logging, cementing, perforating and stimulation. However, in the future we see enormous potential for growth in the areas of seismic for reservoir monitoring, production services and project management. To succeed we will have to greatly strengthen our geo-technical workforce - geologists, geophysicists, drilling, reservoir and petroleum engineers. This will involve recruiting new graduates and developing their careers in addition to mid-career hiring. For the last 25 years, we have developed a culture of hiring in the countries where we work and of career development for employees of all nationalities. I will review our recruiting, training and university relations efforts and will discuss the adjustments we have made to effectively manage the growth of our geo-technical community.

  18. RAPID3? Aptly named!

    Science.gov (United States)

    Berthelot, J-M

    2014-01-01

    The RAPID3 score is the sum of three 0-10 patient self-report scores: pain, functional impairment on MDHAQ, and patient global estimate. It requires 5 seconds for scoring and can be used in all rheumatologic conditions, although it has mostly been used in rheumatoid arthritis where cutoffs for low disease activity (12/30) have been set. A RAPID3 score of ≤ 3/30 with 1 or 0 swollen joints (RAPID3 ≤ 3 + ≤ SJ1) provides remission criteria comparable to Boolean, SDAI, CDAI, and DAS28 remission criteria, in far less time than a formal joint count. RAPID3 performs as well as the DAS28 in separating active drugs from placebos in clinical trials. RAPID3 also predicts subsequent structural disease progression. RAPID3 can be determined at short intervals at home, allowing the determination of the area under the curve of disease activity between two visits and flare detection. However, RAPID3 should not be seen as a substitute for DAS28 and face to face visits in routine care. Monitoring patient status with only self-report information without a rheumatologist's advice (including joints and physical examination, and consideration of imaging and laboratory tests) may indeed be as undesirable for most patients than joint examination without a patient questionnaire. Conversely, combining the RAPID3 and the DAS28 may consist in faster or more sensitive confirmation that a medication is effective. Similarly, better enquiring of most important concerns of patients (pain, functional status and overall opinion on their disorder) should reinforces patients' confidence in their rheumatologist and treatments.

  19. Many small consumers, one growing problem: Achieving energy savings for electronic equipment operating in low power modes

    Energy Technology Data Exchange (ETDEWEB)

    Payne, Christopher T.; Meier, Alan K.

    2004-08-24

    An increasing amount of electricity is used by equipment that is neither fully ''on'' nor fully ''off.'' We call these equipment states low power modes, or ''lopomos.'' ''Standby'' and ''sleep'' are the most familiar lopomos, but some new products already have many modes. Lopomos are becoming common in household appliances, safety equipment, and miscellaneous products. Ross and Meier (2000) reports that several international studies have found standby power to be as much as 10 percent of residential energy consumption. Lopomo energy consumption is likely to continue growing rapidly as products with lopomos that use significant amounts of energy penetrate the market. Other sectors such as commercial buildings and industry also have lopomo energy use, perhaps totaling more in aggregate than that of households, but no comprehensive measurements have been made. In this paper, we propose a research agenda for study of lopomo energy consumption. This agenda has been developed with input from over 200 interested parties. Overall, there is consensus that lopomo energy consumption is an important area for research. Many see this as a critical time for addressing lopomo issues. As equipment designs move from the binary ''on/off'' paradigm to one that encompasses multiple power modes, there is a unique opportunity to address the issue of low power mode energy consumption while technology development paths are still flexible.

  20. Growing media constituents determine the microbial nitrogen conversions in organic growing media for horticulture.

    Science.gov (United States)

    Grunert, Oliver; Reheul, Dirk; Van Labeke, Marie-Christine; Perneel, Maaike; Hernandez-Sanabria, Emma; Vlaeminck, Siegfried E; Boon, Nico

    2016-05-01

    Vegetables and fruits are an important part of a healthy food diet, however, the eco-sustainability of the production of these can still be significantly improved. European farmers and consumers spend an estimated €15.5 billion per year on inorganic fertilizers and the production of N-fertilizers results in a high carbon footprint. We investigated if fertilizer type and medium constituents determine microbial nitrogen conversions in organic growing media and can be used as a next step towards a more sustainable horticulture. We demonstrated that growing media constituents showed differences in urea hydrolysis, ammonia and nitrite oxidation and in carbon dioxide respiration rate. Interestingly, mixing of the growing media constituents resulted in a stimulation of the function of the microorganisms. The use of organic fertilizer resulted in an increase in amoA gene copy number by factor 100 compared to inorganic fertilizers. Our results support our hypothesis that the activity of the functional microbial community with respect to nitrogen turnover in an organic growing medium can be improved by selecting and mixing the appropriate growing media components with each other. These findings contribute to the understanding of the functional microbial community in growing media and its potential role towards a more responsible horticulture. © 2016 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

  1. Economic efficiency in fish farming: hope for agro-allied industries in Niagara

    Science.gov (United States)

    Kareem, R. O.; Dipeolu, A. O.; Aromolaran, A. B.; Williams, S. B.

    2008-02-01

    The challenge to increase the efficiency in food production level in Nigeria appears to be more urgent now than it has ever been in the history of the country. This is in view of the rapidly increasing population, the imminent decline in international economic and food aid and the need to conserve foreign exchange earnings through the production of raw materials to feed the growing industrial sector calls for urgent attention. The study was carried out in Ogun State. The descriptive statistics was used to determine the socio-economic characteristics of the respondents. The stochastic frontiers production analysis was applied to estimate the technical, allocative efficiency and economic efficiency among the fish farmers in the state. The results of economic efficiency revealed that fish farming is economically efficient with a range of between 55% and 84% efficiency level suggesting a favourable hope for the agro-allied industry such as poultry and cottage industries etc in the state. The result of hypothesis of inefficiency sources models showed that years of experience of fish farmers is significant at 1% probability level indicating the factor contributing to the fish farming experience in the state. Thus, the efficiency is due to the fact that farmers are experienced and fairly educated. On the basis of findings, policy is suggested to be directed towards the encouragement of entrepreneurs in fish farming in the state by providing enabling environment like credit facilities, public enlightenment programme and provision of social amenities like feeder roads, pipe-born water etc and given the fact that an increase in the level of formal education variable leads to less inefficiency, government policy should be focused on adopting the best technology (e.g. fast growing species and equipment) so as to improve the level of efficiency and investment which shall eventually lead to growth in output of fish farming and a lead to the establishment of agro

  2. Globalisation and Air Transportation Industry: A Case Study of Malaysia

    OpenAIRE

    Kamaruddin, Shahrul Kamal

    2010-01-01

    Air transportation remains a large and growing industry that is central to the globalisation process. The globalisation impact on the air transportation industry remains largely focused on the airlines, while the impact on airports is rarely defined. The objective of this research is to identify the processes of globalisation that impact the air transportation industry specifically on airport development and operations that will greatly influence the changing nature of airports. A survey ques...

  3. Nurturing a growing field: Computers & Geosciences

    Science.gov (United States)

    Mariethoz, Gregoire; Pebesma, Edzer

    2017-10-01

    Computational issues are becoming increasingly critical for virtually all fields of geoscience. This includes the development of improved algorithms and models, strategies for implementing high-performance computing, or the management and visualization of the large datasets provided by an ever-growing number of environmental sensors. Such issues are central to scientific fields as diverse as geological modeling, Earth observation, geophysics or climatology, to name just a few. Related computational advances, across a range of geoscience disciplines, are the core focus of Computers & Geosciences, which is thus a truly multidisciplinary journal.

  4. Parallelized seeded region growing using CUDA.

    Science.gov (United States)

    Park, Seongjin; Lee, Jeongjin; Lee, Hyunna; Shin, Juneseuk; Seo, Jinwook; Lee, Kyoung Ho; Shin, Yeong-Gil; Kim, Bohyoung

    2014-01-01

    This paper presents a novel method for parallelizing the seeded region growing (SRG) algorithm using Compute Unified Device Architecture (CUDA) technology, with intention to overcome the theoretical weakness of SRG algorithm of its computation time being directly proportional to the size of a segmented region. The segmentation performance of the proposed CUDA-based SRG is compared with SRG implementations on single-core CPUs, quad-core CPUs, and shader language programming, using synthetic datasets and 20 body CT scans. Based on the experimental results, the CUDA-based SRG outperforms the other three implementations, advocating that it can substantially assist the segmentation during massive CT screening tests.

  5. Growing Quality in Qualitative Health Research

    Directory of Open Access Journals (Sweden)

    Mary Ellen Macdonald PhD

    2009-06-01

    Full Text Available Qualitative methodologies are growing in popularity in health research; however, the integration of these methodologies into the clinical context is not always straightforward. In this article the author discusses some of the paradigmatic and methodological tensions that characterize the use of qualitative methodologies in clinical health research and showcase one solution to these tensions. The McGill Qualitative Health Research Group is a scholarly group of qualitative health researchers working together to advance a qualitative research agenda in clinical disciplines.

  6. Mapping Nutrients Crucial to a Growing Population

    Science.gov (United States)

    Tarnowski, J. R.; Cassidy, E. S.; Gerber, J. S.

    2011-12-01

    Over two billion people worldwide suffer from inadequate levels of micronutrients, mainly in the form of iodine, iron, and vitamin A deficiencies. With a growing population, producing crops that contain high amounts of these micronutrients is of increased importance. Addressing these deficiencies sustainably requires a detailed examination of the agricultural production of the micronutrients. The purpose of this study is to determine whether or not enough of these important nutrients are produced to meet the nutritional needs of the global population, and to determine where nutrients are most deficient. We used area specific crop production data to map where and how much iron and vitamin A are produced from major crops.

  7. Growing in darkness: The etiolated lupin hypocotyls

    OpenAIRE

    Sánchez-Bravo, José; Oliveros-Valenzuela, M Rocío; Nicolás, Carlos; Acosta, Manuel

    2008-01-01

    Epigeal germination of a dicot, like lupin (Lupinus albus L.), produces a seedling with a characteristic hypocotyl, which grows in darkness showing a steep growth gradient with an elongation zone just below the apex. The role of phytohormones, such as auxin and ethylene, in etiolated hypocotyl growth has been the object of our research for some time. The recent cloning and expression of three genes of influx and efflux carriers for polar auxin transport (LaAUX1, LaPIN1 and LaPIN3) reinforces ...

  8. Campylobacter infection has different outcomes in fast- and slow-growing broiler chickens.

    Science.gov (United States)

    Williams, L K; Sait, L C; Trantham, E K; Cogan, T A; Humphrey, T J

    2013-06-01

    Campylobacter spp. are frequently carried by poultry, but they are not believed to cause significant disease in these animals. Modern poultry breeds have been selected to grow rapidly under intensive conditions, but recently, consumers have moved toward purchasing birds produced in higher welfare, free-range or organic systems. Birds reared in these systems tend to be a slower growing breed and are fed a different diet. Birds reared in such systems are stocked at a lower density compared with the standard conventional broilers, and they have access to environmental enrichment, such as perches. In previous research, these slower growing birds have been shown to have different levels of Campylobacter carriage in commercial rearing conditions, but the reasons for, and effect of, these different levels are unknown; is it the bird breed, diet, or environmental conditions? In this study, experimental flocks of fast- and slow-growing breeds of broiler chickens were reared to a standard commercial slaughter weight, with their weight gain being measured during the growing period. At 21 days, birds were either infected with Campylobacter jejuni or given a placebo as control. Cohorts of birds were euthanatized at various intervals, and samples were taken for examination for Campylobacter. The fast-growing birds gained weight more rapidly than the slow-growing birds. By 2 days postinfection (dpi), C. jejuni was detected in the caeca and by enrichment from the liver and spleen samples from both breeds of birds. Low-level colonization persisted in the spleen and liver samples but was undetectable by 28 dpi. Fast- and slow-growing birds did not show detectably different levels of Campylobacter carriage. Infection with C. jejuni affected the incidence of hock marks and pododermatitis in both breeds of birds, but the differences were greater with the fast-growing breed compared with the uninfected control birds. In addition, the incidence of pododermatitis was significantly higher

  9. INDUSTRI KREATIF INDONESIA: PENDEKATAN ANALISIS KINERJA INDUSTRI

    Directory of Open Access Journals (Sweden)

    Ahmad Kamil

    2015-10-01

    Full Text Available In 2008, the Department of Commerce of the Republic of Indonesia has launched a creative economic development documents interpreted the 2025 Indonesia became the starting point and guide the development of the creative economy in Indonesia. With the existence of this document, the industry and its stakeholders or other stakeholders can readily develop the creative economy in Indonesia. Economic development in the direction of the creative industries is one manifestation of optimism aspiration to support the Master Plan for the Acceleration and Expansion of Indonesia's Economic Development in realizing the vision of Indonesia are being developed nation. The main objective of this study is the first to analyze the role of the creative industries in Indonesia for labor, value added and productivity, secondly, to analyze the performance trend of the creative industries sector, and third, to analyze the factors affecting the performance of the creative industries sector in Indonesia. Under Indonesia Standard Industrial Classification (ISIC and codes 151-372 (manufacturing industries category identified 18 industry groups belonging to the creative industries, showed that the performance of the national creative industries has been relatively high (in terms of trend analysis of the performance of the industrial creative. Furthermore, regression analysis of panel data (econometrics indicates that company size (SIZE, wages for workers (WAGE and the content of local inputs (LOCAL has a significant impact on the performance of Indonesia's creative industry. Meanwhile, the concentration ratio (CR4 no consequences but have koresi significantly positive effect on the performance of Indonesia’s creative industry.

  10. Biofilm-growing intestinal anaerobic bacteria.

    Science.gov (United States)

    Donelli, Gianfranco; Vuotto, Claudia; Cardines, Rita; Mastrantonio, Paola

    2012-07-01

    Sessile growth of anaerobic bacteria from the human intestinal tract has been poorly investigated, so far. We recently reported data on the close association existing between biliary stent clogging and polymicrobial biofilm development in its lumen. By exploiting the explanted stents as a rich source of anaerobic bacterial strains belonging to the genera Bacteroides, Clostridium, Fusobacterium, Finegoldia, Prevotella, and Veillonella, the present study focused on their ability to adhere, to grow in sessile mode and to form in vitro mono- or dual-species biofilms. Experiments on dual-species biofilm formation were planned on the basis of the anaerobic strains isolated from each clogged biliary stent, by selecting those in which a couple of anaerobic strains belonging to different species contributed to the polymicrobial biofilm development. Then, strains were investigated by field emission scanning electron microscopy and confocal laser scanning microscopy to reveal if they are able to grow as mono- and/or dual-species biofilms. As far as we know, this is the first report on the ability to adhere and form mono/dual-species biofilms exhibited by strains belonging to the species Bacteroides oralis, Clostridium difficile, Clostridium baratii, Clostridium fallax, Clostridium bifermentans, Finegoldia magna, and Fusobacterium necrophorum. © 2012 Federation of European Microbiological Societies. Published by Blackwell Publishing Ltd. All rights reserved.

  11. Tracheotomy in growing rats: histological aspects

    Directory of Open Access Journals (Sweden)

    Manna Mônica Cecília Bochetti

    2003-01-01

    Full Text Available PURPOSE: To compare morphologically three different types of tracheotomy in growing rats, applying microsurgical technique. METHODS: EPM-1 Wistar growing rats (n=57 weighing 88gm and aged 35 days were randomized in four groups, according tracheotomy incision type (longitudinal, transverse and tracheal segment excision, and sham group. Following intramuscular anesthesia with ketamine and xylazine, the trachea was exposed and incised, according to the group, and a hand-made endotracheal cannula was inserted into the organ, under sterile conditions. This cannula was removed after 7 days, and animals have been sacrificed 30 days later. Tracheas samples were submitted to histological study, stained by hematoxylin-eosin and Masson trichrome, evaluating fibrosis, inflammatory infiltrate and epidermoid metaplasia. RESULTS: There was more frequency of inflammatory infiltrate at the tracheal epithelium in the tracheal segment excision group (87% compared to the longitudinal (40% and transverse (36% incision groups (p=0.009. Evaluating epidermoid metaplasia, tracheal segment excision and the longitudinal groups presented 33% and 40%, respectively, compared to 0% of the transverse group (p=0.03. Concerning to fibrosis, in a global comparison (p=0.1 among the three groups there was no difference, however, compared to the longitudinal group the transverse group showed lower level of fibrosis (p=0.04. Sham group did not present any relevant morphologic alterations and it was used as reference pattern. CONCLUSION: Taken together, our data show that tracheal segment excision promotes more epithelium aggression and transverse tracheal incision shows less morphologic alterations.

  12. Immunotoxicity of ochratoxin A to growing gilts.

    Science.gov (United States)

    Harvey, R B; Elissalde, M H; Kubena, L F; Weaver, E A; Corrier, D E; Clement, B A

    1992-10-01

    Ochratoxin A (OA) was incorporated in the diets of growing gilts (mean body weight, 20.1 kg) at a concentration of 2.5 mg of OA/kg of feed and was fed continuously for 35 days. Humoral and cell-mediated immunologic measurements were evaluated to determine the effects of OA on immune function in swine. Cutaneous basophil hypersensitivity to phytohemagglutinin (PHA), delayed hypersensitivity to tuberculin, PHA-induced lymphocyte blastogenesis, interleukin-2 production, total and isotype immunoglobulin concentrations, antibody response to chicken RBC, and macrophage activation were used to evaluate immune function. Gilts treated with OA had reduced cutaneous basophil hypersensitivity response to PHA, reduced delayed hypersensitivity to tuberculin, decreased stimulation index for lymphoblastogenesis, decreased interleukin-2 production when lymphocytes were stimulated with concanavalin A, and decreased number and phagocytic activity of macrophages. Differences were not observed for total and isotype immunoglobulin concentrations, or humoral hemagglutination (chicken RBC) titer. These data indicate that OA may suppress cell-mediated immune response in growing swine.

  13. Light colour preference of growing rabbits

    Directory of Open Access Journals (Sweden)

    Zsolt Szendrő

    2010-01-01

    Full Text Available The objective of the experiment was to evaluate the light colour preference of growing rabbits placed in a free-choice cage. The experiment was carried out on 128 Pannon White growing rabbits weaned at the age of 5 weeks and placed into blocks (2m2 of four cages. The rabbits could move freely among the four cages (0.5m2 each through swing doors. The cages differed only in the colour of the light applied (white, yellow, green or blue. The lighting schedule was 16L: 8D. From 6 until 10 weeks of age, infrared video recording was performed once a week (24 hours. The number of rabbits in each cage was counted every 15 minutes. Feed consumption was measured weekly. Between 6 and 10 weeks of age the rabbits significantly preferred white light (28.0%. The preference order was the following: yellow (26.3%, blue (23.4% and green (22.3% (P<0.001. No significant differences were recorded in the feed consumption among the cages. In conclusion, the cage preference of the rabbits was slightly affected by the light colour.

  14. Automotive Industry in Malaysia

    DEFF Research Database (Denmark)

    Wad, Peter; Govindaraju, V.G.R. Chandran

    2011-01-01

    This paper explains the evolution and assesses the development of the Malaysian automotive industry within the premise of infant industry and trade protection framework as well as extended arguments of infant industry using a global value chain perspective. The Malaysian automotive industry expan...

  15. THE ANALYSIS OF FIVE COMPETITIVE FORCES OF NON-ALCOHOLIC BEVERAGE INDUSTRY AND E-COMMERCE INDUSTRY CASES AT THE GLOBAL LEVEL

    OpenAIRE

    Manuel, Eduardo

    2007-01-01

    This paper has as objective to do an analysis of five competitive forces of non-alcoholic industry and e-commerce industry at the global level. The state of five competitive forces in both industries will depend always of evolution of these industries and government policies of the different countries of the world. For example if these industries are growing and if the govern permit others companies can enter into industry and can help to promote the competition in these industries, that i...

  16. Eco-transformation of industrial parks in China

    NARCIS (Netherlands)

    Yu, C.

    2014-01-01

    During the past three decades, China has achieved impressive economic development. However, the pollution and resource depletion that accompanied China's rapid industrialization have led to severe environmental issues, such as ecosystem degradation, groundwater contamination and smog, which have

  17. Industrial Hardening: 1981 Technical Status-Report.

    Science.gov (United States)

    1982-09-01

    that are sensitive to rapid shutdown would include petroleum refining and petrochemicals, rubber and plastics, and chemical and fertilizer plants. The...HEAVY-DUTY IMPACT MILLS DESCRIPTION INDUSTRIES WHERE USED Cage mills Quarries, phosphate, fertilizer , colors, presscake (e.g. vegetable oils...bauxite, rollers that operate in coke, magnesite , iron oxide pigments, conjunction with grinding sulfur, talc, graphite, calcium phosphates, rings

  18. Photovoltaic industry progress through 1984

    Energy Technology Data Exchange (ETDEWEB)

    Watts, R.L.; Smith, S.A.; Dirks, J.A.

    1985-04-01

    The growth of the US photovoltaics (PV) industry over the past decade has been impressive. First designed to provide power for satellites using high-cost production techniques, PV is now the economical choice in many remote terrestrial applications. The remarkable growth of PV in terms of quality of cells and modules, production techniques, and system design, was initiated by a cooperative effort of the US Government and the domestic PV manufacturers. European and Japanese firms entered the PV industry later, but are also growing rapidy. The Europeans continue to supply PV systems for village electrification and water pumping to many Third World countries. The Japanese have been developing the amorphous silicon (A-Si) technology by expanding its use in consumer goods. The world PV industry saw dramatic changes in industry ownership and in the emphasis on developing new and improved technology during 1984. The objective of this report is to present information on the developments of the world PV industry and focuses on developments occurring in 1984. Information is presented on a regional basis (US, Europe, Japan, other) to avoid disclosing company-confidential data. All information was gleaned from several sources, including a review of the technical literature and direct contacts with PV manufacturers. Prior to publishing the regional totals, all numbers were compared with those of other sources. The information contained in this report is prepared for use by the Department of Energy for their use in long-term R and D planning. However, this information should also be of interest by PV manufacturers and to those who may be contemplating entering the PV market. PV shipments for 1984, government supports for PV, and various PV market sectors are discussed.

  19. Industrial requirements in food safety.

    Science.gov (United States)

    Vincent, P M

    1990-01-01

    The principles of establishing industrial requirements in food safety are described, taking risk potentials all along the food chain into their respective account. Regulations will, in the future, lead to increased autocontrol in production. The rapid changes in food technology require constant adaptation to new problems, to keep the global quality of food at a high level. Regulatory authorities will, in the new European market, concentrate on enforcement of 'essential requirements' while industrialists will follow good manufacturing practices. Open dialogue between the latter, the former and the scientific community is highly desirable since mutual knowledge of the problem will help maintain a high level of food safety, for the benefit of everybody.

  20. A Radiologist's Guide to the Industry: A Methodical Approach to Physician-Industry Relationships in Radiology.

    Science.gov (United States)

    Perry, Donald Dj; Khorsand, Derek; McNeeley, Michael

    In the last century, rapidly advancing technological innovations have become essential components of modern healthcare, increasing the frequency and necessity of interactions between physicians and industry. These interactions have the potential to bias objectivity and should be approached carefully. A recent JACR article by Harvey et al, highlighted 2014 CMS data, which reported that only 4% of radiologists had interactions with industry, coming in second lowest amongst all 19 reported specialties. However, when managed appropriately, physician-industry relationships can mutually benefit patients, research, payers, providers, hospitals and the medical industry. In order to maintain relevance in the evolving healthcare landscape, it is imperative that radiologists establish, maintain, and expand relationships with industry. To help providers work within the ethical safety of institutional guidelines, while still promoting innovation, we propose a methodical approach with 7 key components to consider when developing appropriate physician-industry relationships or evaluating new products. Copyright © 2017 Elsevier Inc. All rights reserved.

  1. COLLECTIVE LEARNING IN A LEARNING ORGANIZATION: GROWING TEAM LEARNING CULTURE TO SURVIVE AND DEVELOP

    Directory of Open Access Journals (Sweden)

    Adi Suryani

    2012-11-01

    Full Text Available A learning organization has a deep culture of learning. It is constantly encourage its member to learn. This learning activity is not only for adapting to the rapid changing of its internal and external environment, but also for growing. The effort of a learning organization to create a conducive learning climate can be indicated by training its members. Working towards a learning organization has both its strengths and drawbacks. The strengths are it can improve the organization performance and organization survival. However, learning too rapid can lead to learning stress. Moreover it can lead to harsh internal competition.

  2. INDUSTRIAL FOOD – THE DAILY TOXIN SERVING

    Directory of Open Access Journals (Sweden)

    Afrodita BORMA

    2017-08-01

    Full Text Available This paper presents the opposition between industrial and organic food. The method used focuses on an extensive documentation based on statistical data, documentary films, books and articles that provide us various information about the devastating effect of chemicals used by the food industry. Most of the documents used are based on case studies and concrete examples that condemn the current food industry, which “forces” the population of the globe to consume artificial food, (lacking vitamins and minerals, which, according to specialists, “keeps us alive but hurries the end”. In order to change this cruel reality, a growing number of activists (physicians, economists, biologists, chemists, etc. fight to stop the food chaos created by the current food industry, seeking and offering viable solutions for protecting the environment and the public health.

  3. Global interdependence and restructuring of industrial production

    Directory of Open Access Journals (Sweden)

    Miletić Radmila

    2008-01-01

    Full Text Available The main objective of this paper is to emphasize particular aspects in connection with deindustrialization and globalization processes during transformation of the economic structure in postindustrial age. Conceptions and main features of globalization are presented, i.e. growing interdependence on the global level, then primary characteristics of industrial globalization as one of the forms of globalization process, and in general some brief considerations about the influence of the economic globalization on deindustrialization. In modern economic environment, transformation of production includes, besides other structural changes, modification of the geography of manufacturing and new industrial space - development of the newly industrializing countries, and new spatial forms of production allocation and possibilities for linking of various activities and services (technopolis, industrial, technology and science park, etc..

  4. Elastic plastic analysis of growing cracks

    Energy Technology Data Exchange (ETDEWEB)

    Rice, J R; Drugan, W J; Sham, T L

    1979-05-01

    The elastic--plastic stress and deformation fields at the tip of a crack which grows in an ideally plastic solid under plane strain, shows small scale yielding conditions. Results of an asymptotic analysis suggests the existence of a crack tip stress state similar to that of the classical Prandtl field, but containing a zone of elastic unloading between the centered fan region and the trailing constant stress plastic region. The near tip expression for the rate of opening displacement delta at distance r from the growing tip is found to have the form delta-. = ..cap alpha.. J-./sigma/sub o/ + ..beta..(sigma/sub o//E) a-. ln(R/r) but the presence of the elastic wedge causes ..beta.. to have the revised value of 5.08 (for Poisson ratio ..nu.. = 0.3); also, (a = crack length, sigma/sub o/ = yield strength, E = elastic modulus, and J denotes the far-field value), and (1-..nu../sup 2/)K/sup 2//E for the small scale yielding conditions considered. The parameters ..cap alpha.. and R cannot be determined from the asymptotic analysis, but comparisons with finite element solutions suggest that, for small amounts of growth, ..cap alpha.. is approximately the same for stationary and growing cracks, and R scales approximately with the size of the plastic zone, being about 15% to 30% larger. For large scale yielding, a similar form applies with possible variations in ..cap alpha.. and ..beta.., in cases which maintain triaxial constraint at the crack tip. In the fully yielded case R is expected to be proportional to the dimension of the uncracked ligament. Model crack growth criterion requiring a critical delta at some fixed r from the tip, is re-examined in light of the more accurate solution. Results suggest that the J versus ..delta..a relation describing growth is dependent on the extent of yielding. It is suggested that this dependency might be small for highly ductile materials, provided that a similar triaxial constraint is maintained in all cases.

  5. Rapid small lot manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Harrigan, R.W.

    1998-05-09

    The direct connection of information, captured in forms such as CAD databases, to the factory floor is enabling a revolution in manufacturing. Rapid response to very dynamic market conditions is becoming the norm rather than the exception. In order to provide economical rapid fabrication of small numbers of variable products, one must design with manufacturing constraints in mind. In addition, flexible manufacturing systems must be programmed automatically to reduce the time for product change over in the factory and eliminate human errors. Sensor based machine control is needed to adapt idealized, model based machine programs to uncontrolled variables such as the condition of raw materials and fabrication tolerances.

  6. Dietary supplementation of butyrate in growing rabbits

    Directory of Open Access Journals (Sweden)

    G. Radaelli

    2010-01-01

    Full Text Available The UE restrictions imposed on the antibiotic utilization in animal husbandry have increased the interest on alternative additives capable of improving animal digestive health. Among the numerous tested products, short chain fatty acids stimulated intestinal mucus production at different level and intestinal cells proliferation in rats (Meslin et al., 2001; Moreau et al., 2003. Short and medium chain fatty acids could also modulate intestinal microflora: in rabbits, the antimicrobial activity of caprilic and capric acids was proved on various strains of Clostridium perfringens and Escherichia coli (Marounek et al., 2002. The present trial aimed to evaluate the effect of butyrate inclusion and level on growth performance, health status, digestive physiology and slaughter traits in growing rabbits.

  7. Morphogenesis of filaments growing in flexible confinements

    Science.gov (United States)

    Vetter, R.; Wittel, F. K.; Herrmann, H. J.

    2014-07-01

    Space-saving design is a requirement that is encountered in biological systems and the development of modern technological devices alike. Many living organisms dynamically pack their polymer chains, filaments or membranes inside deformable vesicles or soft tissue-like cell walls, chorions and buds. Surprisingly little is known about morphogenesis due to growth in flexible confinements—perhaps owing to the daunting complexity lying in the nonlinear feedback between packed material and expandable cavity. Here we show by experiments and simulations how geometric and material properties lead to a plethora of morphologies when elastic filaments are growing far beyond the equilibrium size of a flexible thin sheet they are confined in. Depending on friction, sheet flexibility and thickness, we identify four distinct morphological phases emerging from bifurcation and present the corresponding phase diagram. Four order parameters quantifying the transitions between these phases are proposed.

  8. The Research of Scrapped Automobiles Recycling and Disassembling Industry Development Based on Auto Industry Chain

    Directory of Open Access Journals (Sweden)

    linhua Pang

    2015-01-01

    Full Text Available The number of China’s scrapped car is on an explosively growing trend, and the development of scrapped car recycling industry has a golden prospect. The current scrapped car recycling system is not perfect in our country, because related industries driven by market develop slowly, and there are some outstanding problems such as potential safety risks, environmental pollution and resource waste. The paper analyzes and studies the existing problems and countermeasures to investigate the development strategy of scrapped car recycling industry according to the whole automobile industry chain construction, technology and equipment conditions, policy guidance, etc. and at last explore the new industrial development pattern of serving automobile reverse design.

  9. Feed efficiency metrics in growing pigs.

    Science.gov (United States)

    Calderón Díaz, J A; Berry, D P; Rebeiz, N; Metzler-Zebeli, B U; Magowan, E; Gardiner, G E; Lawlor, P G

    2017-07-01

    The objective of the present study was to quantify the interrelationships between different feed efficiency measures in growing pigs and characterize pigs divergent for a selection of these measures. The data set included data from 311 growing pigs between 42 and 91 d of age from 3 separate batches. Growth-related metrics available included midtest metabolic BW (BW), energy intake (EI), and ADG. Ratio efficiency traits included energy conversion ratio (ECR), Kleiber ratio (ADG/BW), relative growth rate (RGR), residual EI (REI), and residual daily gain (RDG). Residual intake and gain (RIG; i.e., a dual index of both REI and RDG) and residual midtest metabolic weight (RMW) were also calculated. Simple Pearson correlations were estimated between the growth and feed efficiency metrics. In litters with at least 3 pigs of each sex, pigs were separately stratified on each residual trait as high, medium, and low rank. Considerable interanimal variability existed in all metrics evaluated. Male pigs were superior to females for all metrics ( efficiency metrics improved as birth BW increased ( efficiency metrics were strong to moderate ( efficient) had lower EI and ECR and were superior for RIG ( efficient) had greater BW gain and better ECR ( Energy conversion ratio, REI, and RIG were superior ( efficient) compared with medium-RMW pigs. High-RIG pigs (i.e., more efficient) had lower EI ( efficiency traits investigated in this study were different from unity, indicating that each trait is depicting a different aspect of efficiency in pigs, although the moderate to strong correlations suggest that improvement in one trait would, on average, lead to improvements in the others. Pigs ranked as more efficient on residual traits such as REI consumed less energy for a similar BW gain, which would translate into an economic benefit for pig producers.

  10. Rapid Cycling and Its Treatment

    Science.gov (United States)

    ... Announcements Public Service Announcements Partnering with DBSA Rapid Cycling and its Treatment What is bipolar disorder? Bipolar ... to Depression and Manic Depression . What is rapid cycling? Rapid cycling is defined as four or more ...

  11. Onshore industrial wind turbine locations for the United States up to March 2014.

    Science.gov (United States)

    Diffendorfer, Jay E; Kramer, Louisa A; Ancona, Zach H; Garrity, Christopher P

    2015-11-24

    Wind energy is a rapidly growing form of renewable energy in the United States. While summary information on the total amounts of installed capacity are available by state, a free, centralized, national, turbine-level, geospatial dataset useful for scientific research, land and resource management, and other uses did not exist. Available in multiple formats and in a web application, these public domain data provide industrial-scale onshore wind turbine locations in the United States up to March 2014, corresponding facility information, and turbine technical specifications. Wind turbine records have been collected and compiled from various public sources, digitized or position verified from aerial imagery, and quality assured and quality controlled. Technical specifications for turbines were assigned based on the wind turbine make and model as described in public literature. In some cases, turbines were not seen in imagery or turbine information did not exist or was difficult to obtain. Uncertainty associated with these is recorded in a confidence rating.

  12. Coopetition in the steel industry − analysis of coopetition relations in the value net

    Directory of Open Access Journals (Sweden)

    W. Sroka

    2013-01-01

    Full Text Available The paper presents some of the problems relating to the coopetition relations in the steel industry. Coopetition is one of the key issues relating to the inter-organizational cooperation in recent years. On one hand, companies are working together and sharing the effects of uncertainty arising from the environment, and on the other hand they compete with each other in other areas, remaining competitors. In other words, they must reconcile each aspect of competition and cooperation, which is particularly important in case of cooperation involving more than two partners. Coopetition is a relatively new phenomenon, however it is growing very rapidly, and companies which are able to utilize this concept effectively can gain a coopetitive advantage over their competitors.

  13. Bacterial microflora isolated from the bark surface of poplars growing in areas where air pollution is very high

    Directory of Open Access Journals (Sweden)

    Krystyna Przybył

    2015-01-01

    Full Text Available In the autumn of 1976 bacteria of the genera Bacillus, Pseudomonas, Flavobacterium, Erwinia and Cellulomonas were isolated from the bark surface of poplars growing in protective belts around several industrial plants. It was found that the qualitative and quantitative composition of the surface bacterial microflora changes in dependence on the degree of resistance of the poplars to the action of the dust emitted by the industrial establishment and containing high amounts of heavy metals.

  14. Rapid Prototyping: Technologies, Materials and Advances

    Directory of Open Access Journals (Sweden)

    Dudek P.

    2016-06-01

    Full Text Available In the context of product development, the term rapid prototyping (RP is widely used to describe technologies which create physical prototypes directly from digital data. Recently, this technology has become one of the fastest-growing methods of manufacturing parts. The paper provides brief notes on the creation of composites using RP methods, such as stereolithography, selective laser sintering or melting, laminated object modelling, fused deposition modelling or three-dimensional printing. The emphasis of this work is on the methodology of composite fabrication and the variety of materials used in these technologies.

  15. COLLECTIVE LEARNING IN A LEARNING ORGANIZATION: GROWING TEAM LEARNING CULTURE TO SURVIVE AND DEVELOP

    OpenAIRE

    Adi Suryani

    2012-01-01

    A learning organization has a deep culture of learning. It is constantly encourage its member to learn. This learning activity is not only for adapting to the rapid changing of its internal and external environment, but also for growing. The effort of a learning organization to create a conducive learning climate can be indicated by training its members. Working towards a learning organization has both its strengths and drawbacks. The strengths are it can improve the organization performan...

  16. The effect of loss of occlusal support on mandibular morphology in growing rats

    OpenAIRE

    Farias-Neto, A; Martins, APVB; Rizzatti-Barbosa, CM

    2012-01-01

    Objective: To evaluate the effects of unilateral and bilateral premature loss of posterior occlusal support on mandibular bone dimensions in growing rats. Materials and Methods: Thirty female Wistar rats (5 weeks old) were randomized into three groups: control, unilateral mandibular molar teeth extraction, and bilateral mandibular molar teeth extraction. After 8 weeks, animals were sacrificed and acrylic rapid-prototyped templates of the mandibles were constructed. Mandibular length, ramus he...

  17. Effect of imipenem and sulbactam on sessile cells of Acinetobacter baumannii growing in biofilm.

    Science.gov (United States)

    Vidal, R; Dominguez, M; Urrutia, H; Bello, H; Garcia, A; Gonzalez, G; Zemelman, R

    1997-01-01

    The effect of the age of biofilms formed by Acinetobacter baumannii on the activity of sulbactam and imipenem on sessile cells was investigated. Against cells of young biofilms both antibiotics were rapidly bactericidal. As the biofilm aged, sulbactam lost most of its activity, but imipenem continued to be bactericidal to some extent. This fact probably reflects the ability of imipenem to exert bactericidal activity on slow-growing bacteria.

  18. Rapid manufacturing for microfluidics

    CSIR Research Space (South Africa)

    Land, K

    2012-10-01

    Full Text Available . Microfluidics is at the forefront of developing solutions for drug discovery, diagnostics (from glucose tests to malaria and TB testing) and environmental diagnostics (E-coli monitoring of drinking water). In order to quickly implement new designs, a rapid...

  19. Rapid Prototyping in PVS

    Science.gov (United States)

    Munoz, Cesar A.; Butler, Ricky (Technical Monitor)

    2003-01-01

    PVSio is a conservative extension to the PVS prelude library that provides basic input/output capabilities to the PVS ground evaluator. It supports rapid prototyping in PVS by enhancing the specification language with built-in constructs for string manipulation, floating point arithmetic, and input/output operations.

  20. Regional Advection Perturbations in an Irrigated Desert (RAPID) Experiment

    NARCIS (Netherlands)

    Debruin, H.A.R.; Hartogensis, O.K.; Allen, R.G.; Kramer, J.W.J.L.

    2005-01-01

    The RAPID field experiment took place in August - September 1999 at a site 25km south of Twin Falls, Idaho, USA. The experiment concerned micrometeorological observations over extensive, well-irrigated fields covered with the fast-growing crop alfalfa. During daytime, on a number of days the

  1. Metabolomic response of Calotropis procera growing in the desert to changes in water availability.

    Science.gov (United States)

    Ramadan, Ahmed; Sabir, Jamal S M; Alakilli, Saleha Y M; Shokry, Ahmed M; Gadalla, Nour O; Edris, Sherif; Al-Kordy, Magdy A; Al-Zahrani, Hassan S; El-Domyati, Fotouh M; Bahieldin, Ahmed; Baker, Neil R; Willmitzer, Lothar; Irgang, Susann

    2014-01-01

    Water availability is a major limitation for agricultural productivity. Plants growing in severe arid climates such as deserts provide tools for studying plant growth and performance under extreme drought conditions. The perennial species Calotropis procera used in this study is a shrub growing in many arid areas which has an exceptional ability to adapt and be productive in severe arid conditions. We describe the results of studying the metabolomic response of wild C procera plants growing in the desert to a one time water supply. Leaves of C. procera plants were taken at three time points before and 1 hour, 6 hours and 12 hours after watering and subjected to a metabolomics and lipidomics analysis. Analysis of the data reveals that within one hour after watering C. procera has already responded on the metabolic level to the sudden water availability as evidenced by major changes such as increased levels of most amino acids, a decrease in sucrose, raffinose and maltitol, a decrease in storage lipids (triacylglycerols) and an increase in membrane lipids including photosynthetic membranes. These changes still prevail at the 6 hour time point after watering however 12 hours after watering the metabolomics data are essentially indistinguishable from the prewatering state thus demonstrating not only a rapid response to water availability but also a rapid response to loss of water. Taken together these data suggest that the ability of C. procera to survive under the very harsh drought conditions prevailing in the desert might be associated with its rapid adjustments to water availability and losses.

  2. Growth and metal bioconcentration by conspecific freshwater macroalgae cultured in industrial waste water

    Directory of Open Access Journals (Sweden)

    Michael B. Ellison

    2014-05-01

    Full Text Available The bioremediation of industrial waste water by macroalgae is a sustainable and renewable approach to the treatment of waste water produced by multiple industries. However, few studies have tested the bioremediation of complex multi-element waste streams from coal-fired power stations by live algae. This study compares the ability of three species of green freshwater macroalgae from the genus Oedogonium, isolated from different geographic regions, to grow in waste water for the bioremediation of metals. The experiments used Ash Dam water from Tarong power station in Queensland, which is contaminated by multiple metals (Al, Cd, Ni and Zn and metalloids (As and Se in excess of Australian water quality guidelines. All species had consistent growth rates in Ash Dam water, despite significant differences in their growth rates in “clean” water. A species isolated from the Ash Dam water itself was not better suited to the bioremediation of that waste water. While there were differences in the temporal pattern of the bioconcentration of metals by the three species, over the course of the experiment, all three species bioconcentrated the same elements preferentially and to a similar extent. All species bioconcentrated metals (Cu, Mn, Ni, Cd and Zn more rapidly than metalloids (As, Mo and Se. Therefore, bioremediation in situ will be most rapid and complete for metals. Overall, all three species of freshwater macroalgae had the ability to grow in waste water and bioconcentrate elements, with a consistent affinity for the key metals that are regulated by Australian and international water quality guidelines. Together, these characteristics make Oedogonium a clear target for scaled bioremediation programs across a range of geographic regions.

  3. Segregation of chromosome arms in growing and non-growing Escherichia coli cells

    DEFF Research Database (Denmark)

    Woldringh, Conrad L.; Hansen, Flemming G.; Vischer, Norbert O. E.

    2015-01-01

    In slow-growing Escherichia coli cells the chromosome is organized with its left (L) and right (R) arms lying separated in opposite halves of the nucleoid and with the origin (0) in-between, giving the pattern L-O-R. During replication one of the arms has to pass the other to obtain the same...

  4. Growing Youth Growing Food: How Vegetable Gardening Influences Young People's Food Consciousness and Eating Habits

    Science.gov (United States)

    Libman, Kimberly

    2007-01-01

    Much attention is currently being paid to rising rates of obesity, especially among youth. In this context, garden-based education can have a role in improving public health. A qualitative study conducted at the Brooklyn Botanic Garden (BBG) Children's Garden provides supporting evidence for the claim that growing vegetables can improve the…

  5. Wartime diet for growing bobwhite quail

    Science.gov (United States)

    Nestler, R.B.; Llewellyn, L.; Benner, M.

    1944-01-01

    Two experiments, using 784 bobwhite quail chicks, were conducted at the Patuxent Research Refuge, Bowie, Maryland, to find a growing diet that would meet wartime restrictions. In 1941 a diet containing 14 per cent sardine fish meal was formulated and gave satisfactory results from the standpoints of survival and growth. Since fish meal now is scarce, search was made for a diet without war-restricted commodities yet equal to the above-mentioned diet in feeding value. Ten diets were compared.....In the present experiments, quail fed this same diet modified by the substitution of 0.12 per cent of D-activated sterol for vitamin A and D feeding oil fortified showed the highest survival and the best live weights at the end of both the sixth and tenth weeks. They also were among the top three groups in requiring the least quantity of feed per unit of gain in weight; however, they consumed the greatest quantity of feed.....Of the other nine diets, that which seemed most promising, considering survival, live weight, and efficiency of feed utilization, was as follows (parts by weight) : Yellow corn, ground 26.08...Millet, ground 10.00...Alfalfa leaf meal, dehydrated 7.50...Soybean oil meal, solvent-processed 50.00...Dried whey 3.00...Special steamed bonemeal 1.50...Limestone, ground 0.80...Salt mixture 1.OO...D-activated animal sterol 0.12....100.00.....At the end of ten weeks the results on this diet (Diet l l ) , as compared with that containing sardine meal (Diet 23), were as follows: Diet No. 11 Percentage survival 71, Average live weight per bird, grams 144,....Growing mash consumed, per bird-day, grams 6.8 Feed consumed per gram of gain in weight (grams) 3.8......Diet 23....Percentage survival, 80,...Avg live weight per bird, grams....145,....Growing mash consumed , per bird-day, grams...7.4...Feed consumed per gram of gain in weight (grams)....3.9. Results were unsatisfactory when expeller-processed soybean oil meal was used in this diet to replace solvent

  6. The growing need for microservices in bioinformatics

    Directory of Open Access Journals (Sweden)

    Christopher L Williams

    2016-01-01

    Full Text Available Objective: Within the information technology (IT industry, best practices and standards are constantly evolving and being refined. In contrast, computer technology utilized within the healthcare industry often evolves at a glacial pace, with reduced opportunities for justified innovation. Although the use of timely technology refreshes within an enterprise′s overall technology stack can be costly, thoughtful adoption of select technologies with a demonstrated return on investment can be very effective in increasing productivity and at the same time, reducing the burden of maintenance often associated with older and legacy systems. In this brief technical communication, we introduce the concept of microservices as applied to the ecosystem of data analysis pipelines. Microservice architecture is a framework for dividing complex systems into easily managed parts. Each individual service is limited in functional scope, thereby conferring a higher measure of functional isolation and reliability to the collective solution. Moreover, maintenance challenges are greatly simplified by virtue of the reduced architectural complexity of each constitutive module. This fact notwithstanding, rendered overall solutions utilizing a microservices-based approach provide equal or greater levels of functionality as compared to conventional programming approaches. Bioinformatics, with its ever-increasing demand for performance and new testing algorithms, is the perfect use-case for such a solution. Moreover, if promulgated within the greater development community as an open-source solution, such an approach holds potential to be transformative to current bioinformatics software development. Context: Bioinformatics relies on nimble IT framework which can adapt to changing requirements. Aims: To present a well-established software design and deployment strategy as a solution for current challenges within bioinformatics Conclusions: Use of the microservices framework

  7. Rapid Glass Refiner Development Program, Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-20

    A rapid glass refiner (RGR) technology which could be applied to both conventional and advanced class melting systems would significantly enhance the productivity and the competitiveness of the glass industry in the United States. Therefore, Vortec Corporation, with the support of the US Department of Energy (US DOE) under Cooperative Agreement No. DE-FC07-90ID12911, conducted a research and development program for a unique and innovative approach to rapid glass refining. To provide focus for this research effort, container glass was the primary target from among the principal glass types based on its market size and potential for significant energy savings. Container glass products represent the largest segment of the total glass industry accounting for 60% of the tonnage produced and over 40% of the annual energy consumption of 232 trillion Btu/yr. Projections of energy consumption and the market penetration of advanced melting and fining into the container glass industry yield a potential energy savings of 7.9 trillion Btu/yr by the year 2020.

  8. Industry structure and the performance of the Global System for ...

    African Journals Online (AJOL)

    Based on the findings, the study recommended that, managers of the four sampled GSM service providers need to constantly carry-out strategic industry analysis and environmental scanning. This will serve to ensure rapid responses to both favourable and adverse industry conditions as business manager has little or no ...

  9. Education and Training for the European Food Industry.

    Science.gov (United States)

    Oliveira, Jorge; Medina, Augusto

    1993-01-01

    A major surplus of food products in Europe highlights the need for development of training programs to coordinate agricultural and food industry labor needs and market considerations. These largely traditional industries are changing rapidly. Efforts currently under way are emphasizing the international dimension of the business issues and…

  10. A rapid and efficient electroporation method for transformation of Halomonas sp. O-1.

    Science.gov (United States)

    Harris, Joshua R; Lundgren, Benjamin R; Grzeskowiak, Brian R; Mizuno, Kouhei; Nomura, Christopher T

    2016-10-01

    Halomonas sp. O-1 is a halophilic bacterium with a high potential for industrial application due to its natural ability to produce polyhydroxyalkanoates (PHAs) using seawater-based media. However, a major barrier preventing industrial scale implementation of this organism is a lack of molecular methodologies capable of readily transforming members of the Halomonas genus. Currently, the only reliable method used for introducing DNA into Halomonas spp. is bacterial conjugation, a somewhat tedious and time-consuming technique compared to electroporation-based methodologies. Here we describe a rapid and reproducible method for the electroporation of Halomonas sp. O-1 with plasmid DNA. Electrocompetent cells were generated by growing Halomonas sp. O-1 in a yeast extract-tryptone medium with a final salinity of 3.5%, pH of 7.5, followed by several washes using 300mM sucrose. Results show that plasmids containing chloramphenicol (Cm(R)) and gentamicin (Gm(R)) resistance cassettes are suitable antibiotic selection markers for transformation and yields of 10(4) transformants per μg of DNA were obtained. This method is simple to perform and the materials used are readily available in most research labs. Additionally, this plasmid-based transformation procedure has the potential to be adapted for a number of applications including the creation of recombinant stains and the generation of deletion mutants of Halomonas spp. Copyright © 2016 Elsevier B.V. All rights reserved.

  11. Development of a SERS-Based Rapid Vertical Flow Assay for Point-of-Care Diagnostics.

    Science.gov (United States)

    Clarke, O J R; Goodall, B L; Hui, H P; Vats, N; Brosseau, C L

    2017-02-07

    Point-of-care (POC) diagnostic testing platforms are a growing sector of the healthcare industry as they offer the advantages of rapid provision of results, ease of use, reduced cost, and the ability to link patients to care. While many POC tests are based on chromatographic flow assay technology, this technology suffers from a lack of sensitivity along with limited capacity for multiplexing and quantitative analysis. Several recent reports have begun to investigate the feasibility of coupling chromatographic flow platforms to more advanced read-out technologies which in turn enable on-site acquisition, storage, and transmission of important healthcare metrics. One such technology being explored is surface-enhanced Raman spectroscopy or SERS. In this work, SERS is coupled for the first time to a rapid vertical flow (RVF) immunotechnology for detection of anti-HCV antibodies in an effort to extend the capabilities of this commercially available diagnostic platform. High-quality and reproducible SERS spectra were obtained using reporter-modified gold nanoparticles (AuNPs). Serial dilution studies indicate that the coupling of SERS with RVF technology shows enormous potential for next-generation POC diagnostics.

  12. ASSET RECONSTRUCTION COMPANIES IN INDIAN BANKING INDUSTRY

    OpenAIRE

    Dr. Jessy George

    2017-01-01

    Growing non-performing assets is a recurrent problem in today’s Indian banking sector. Asset quality was not prime concern in Indian banking sector till 1991 as banks were mainly focused on performance objectives such as opening wide branches, development of rural banking services by inculcating financial inclusion habits, priority sector lending etc. While the primary function of banks is to lend funds as loans to various sectors of the economy such as agriculture and industry through variou...

  13. Growing pains: twelve lessons from corporate restructuring.

    Science.gov (United States)

    Gill, S L; Johnson, R L

    1988-05-01

    Corporate reorganization is a realignment of resources to enhance competitive strength and can follow one of two lines, vertical or horizontal. Whichever strategy is used, the reason for it remains unchanged: to provide a structural hierarchy through which strategic market niches are acquired and resources are economically deployed throughout the system. Healthcare corporate restructuring, however, is encountering growing pains, some of which were inevitable and others avoidable. When the healthcare organizational landscape is surveyed, 12 lessons can be learned about corporate reorganization: 1. Reorganization should be based on anticipated market and environmental conditions. 2. Form follows function. 3. Interdependence among multiple corporate units must be clearly acknowledged. 4. Reorganization is much more costly and politically charged than it appears at first. Reserved rights must be clearly defined. 6. The purpose and composition of the parent governing board must be distinguished from those of subsidiary boards. 7. Clarification of roles and relationships between the parent and subsidiaries is critical. 8. Unrealistic expectations of success should be confronted through up-front planning, negotiation, and creative problem solving. 9. False assumptions about corporate staffing needs create internal system warfare. 10. Physician support is crucial for success. 11. Hospital-based management skills and understanding may be inadequate for making personnel decisions in subsidiaries other than the hospital. 12. Competitive strategies must be strategically determined and must not be taken gamesmanship.

  14. Autoethnography in Health Research: Growing Pains?

    Science.gov (United States)

    Chang, Heewon

    2016-03-01

    Autoethnography is gaining acceptance as a legitimate research method in health science research. The growing volume of published autoethnographies is indicative of this trend. After discussing the methodological tenents of this qualitative research method and its compatibility with health-related research, the author illustrates this trend with examples of published autoethnogrpahic books, theses, and journal articles. While celebrating the potential of autoethnography as a suitable health research method, the author critiques dominatly descriptive and evocative illness self-narratives that may evoke emontionally compelling responses from readers but offer insufficient sociocultural insights about the illness phenomenon. To identify a "desirable" autoethnography that provides not only a "thick description" of personal experiences but also a sociocultural interpration of such experiences, the author recommends both creators and consumers of autoethnography to ask five evaluative questions: (1) Does the autoethnography use authentic and trustworthy data?; (2) Does the autoethnography follow a reliable research process and show the process clearly?; (3) Does the autoethnography follow ethical steps to protect the rights of self and others presented and implicated in the autoethnography?; (4) Does the autoethnography analyze and interpret the sociocultural meaning of the author's personal experiences?; and (5) Does the autoethnography attempt to make a scholarly contribution with its conclusion and engagement of the existing literature? © The Author(s) 2016.

  15. Growing duckweed for biofuel production: a review.

    Science.gov (United States)

    Cui, W; Cheng, J J

    2015-01-01

    Duckweed can be utilised to produce ethanol, butanol and biogas, which are promising alternative energy sources to minimise dependence on limited crude oil and natural gas. The advantages of this aquatic plant include high rate of nutrient (nitrogen and phosphorus) uptake, high biomass yield and great potential as an alternative feedstock for the production of fuel ethanol, butanol and biogas. The objective of this article is to review the published research on growing duckweed for the production of the biofuels, especially starch enrichment in duckweed plants. There are mainly two processes affecting the accumulation of starch in duckweed biomass: photosynthesis for starch generation and metabolism-related starch consumption. The cost of stimulating photosynthesis is relatively high based on current technologies. Considerable research efforts have been made to inhibit starch degradation. Future research need in this area includes duckweed selection, optimisation of duckweed biomass production, enhancement of starch accumulation in duckweeds and use of duckweeds for production of various biofuels. © 2014 German Botanical Society and The Royal Botanical Society of the Netherlands.

  16. Adult congenital heart disease: a growing epidemic.

    Science.gov (United States)

    Ávila, Pablo; Mercier, Lise-Andrée; Dore, Annie; Marcotte, François; Mongeon, François-Pierre; Ibrahim, Reda; Asgar, Anita; Miro, Joaquim; Andelfinger, Gregor; Mondésert, Blandine; de Guise, Pierre; Poirier, Nancy; Khairy, Paul

    2014-12-01

    Medical and surgical breakthroughs in the care of children born with heart defects have generated a growing population of adult survivors and spawned a new subspecialty of cardiology: adult congenital heart disease. The prevalence of adult congenital heart disease is escalating at a rampant rate, outpacing the relatively static prevalence of pediatric congenital heart disease, because adults now surpass children in numbers by a ratio of 2:1. As such, congenital heart disease can no longer be considered primarily a pediatric specialty. Most congenital heart defects are not curable and require lifelong specialized care. Health care systems worldwide are challenged to meet the unique needs of this increasingly complex patient population, including the development of supraregional centres of excellence to provide comprehensive and multidisciplinary specialized care. In this review, we explore the incidence and prevalence of congenital heart disease and their changing patterns, address organization and delivery of care, highlight the importance of appropriate training and dedicated research, summarize the high burden of health care resource utilization, and provide an overview of common issues encountered in adults with congenital heart disease. Copyright © 2014 Canadian Cardiovascular Society. Published by Elsevier Inc. All rights reserved.

  17. Bioaugmentation in growing plants for lunar bases

    Science.gov (United States)

    Zaets, I.; Burlak, O.; Rogutskyy, I.; Vasilenko, A.; Mytrokhyn, O.; Lukashov, D.; Foing, B.; Kozyrovska, N.

    2011-03-01

    Microorganisms may be a key element in a precursory scenario of growing pioneer plants for extraterrestrial exploration. They can be used for plant inoculation to leach nutritional elements from regolith, to alleviate lunar stressors, as well as to decompose both lunar rocks and the plant straw in order to form a protosoil. Bioleaching capacities of both French marigold (Tagetes patula L.) and the associated bacteria in contact with a lunar rock simulant (terrestrial anorthosite) were examined using the model plant-bacteria microcosms under controlled conditions. Marigold accumulated K, Na, Fe, Zn, Ni, and Cr at higher concentrations in anorthosite compared to the podzol soil. Plants inoculated with the consortium of well-defined species of bacteria accumulated higher levels of K, Mg, and Mn, but lower levels of Ni, Cr, Zn, Na, Ca, Fe, which exist at higher levels in anorthosite. Bacteria also affected the Са/Mg and Fe/Mn ratios in the biomass of marigold grown on anorthosite. Despite their growth retardation, the inoculated plants had 15% higher weight on anorthosite than noninoculated plants. The data suggest that the bacteria supplied basic macro-and microelements to the model plant.

  18. Growing Bacteriophage M13 in Liquid Culture.

    Science.gov (United States)

    Green, Michael R; Sambrook, Joseph

    2017-11-01

    Stocks of bacteriophage M13 are usually grown in liquid culture. The infected bacteria do not lyse but, instead, grow at a slower than normal rate to form a dilute suspension. The inoculum of bacteriophage is almost always a freshly picked plaque or a suspension of bacteriophage particles obtained from a single plaque, as described here. Infected cells contain up to 200 copies of double-stranded, replicative-form DNA and extrude several hundred bacteriophage particles per generation. Thus, a 1-mL culture of infected cells can produce enough double-stranded viral DNA (1-2 mg) for restriction mapping and recovery of cloned DNA inserts and sufficient single-stranded DNA (∼5-10 mg) for site-directed mutagenesis, DNA sequencing, or synthesis of radiolabeled probes. The titer of bacteriophages in the supernatant from infected cells is so high (∼10(12) pfu/mL) that a small aliquot serves as a permanent stock of the starting plaque. © 2017 Cold Spring Harbor Laboratory Press.

  19. The Growing Regulation of Conversion Therapy.

    Science.gov (United States)

    Drescher, Jack; Schwartz, Alan; Casoy, Flávio; McIntosh, Christopher A; Hurley, Brian; Ashley, Kenneth; Barber, Mary; Goldenberg, David; Herbert, Sarah E; Lothwell, Lorraine E; Mattson, Marlin R; McAfee, Scot G; Pula, Jack; Rosario, Vernon; Tompkins, D Andrew

    2016-01-01

    Conversion therapies are any treatments, including individual talk therapy, behavioral (e.g. aversive stimuli), group therapy or milieu (e.g. "retreats or inpatient treatments" relying on all of the above methods) treatments, which attempt to change an individual's sexual orientation from homosexual to heterosexual. However these practices have been repudiated by major mental health organizations because of increasing evidence that they are ineffective and may cause harm to patients and their families who fail to change. At present, California, New Jersey, Oregon, Illinois, Washington, DC, and the Canadian Province of Ontario have passed legislation banning conversion therapy for minors and an increasing number of US States are considering similar bans. In April 2015, the Obama administration also called for a ban on conversion therapies for minors. The growing trend toward banning conversion therapies creates challenges for licensing boards and ethics committees, most of which are unfamiliar with the issues raised by complaints against conversion therapists. This paper reviews the history of conversion therapy practices as well as clinical, ethical and research issues they raise. With this information, state licensing boards, ethics committees and other regulatory bodies will be better able to adjudicate complaints from members of the public who have been exposed to conversion therapies.

  20. Gasification research on wood grow project

    Energy Technology Data Exchange (ETDEWEB)

    Flanigan, V J

    1981-01-09

    The GROW (Gasification Research on Wood) project consists of a research project on thermochemical degradation of wood particles (sawdust or hammermilled wood) on a pilot plant scale and utilizes a 100 cm (40 in.) diameter fluidized sand bed reactor at capacities of up to 1000 Kg/Hr (2200 lb/hr). Supplementary facilities include wood preparation and air conveying, a wood feed bin, feed and transfer screws, an air compressor with storage and filter tanks, an electrical preheater, a propane-fired preheater, a cyclone separator removing solids from product gas, a water scrubber to cool and clean product gas, a scrubber wate settling tank, a scrubber water cooler, a knockout drum, a demister to be installed in the future, a recycle compressor for recirculation, a recycle gas storage tank, a flare and stack with air blower to dispose of the gas, 2 CO/sub 2/ stripper columns to be installed in the future to remove CO/sub 2/ by caustic adsorption, caustic tanks, and the necessary piping, pumps, sampling, and measurement facilities. A brief report of progress on the project is given, followed by the safety implementation plan and operating, maintenance, and safety procedures. (MHR)

  1. The World Oil Industry

    Science.gov (United States)

    Rand, Christopher T.

    1976-01-01

    America's domestic petroleum industry and the international industry have been dominated by seven major firms. Although production costs decreased, sale prices soared with developing political-corporate interrelationships. (MR)

  2. Historicism and Industry Emergence

    DEFF Research Database (Denmark)

    Kirsch, David; Moeen, Mahka; Wadhwani, Dan

    2014-01-01

    Management and organization scholars have increasingly turned to historical sources to examine the emergence and evolution of industries over time. This scholarship has typically used historical evidence as observations for testing theoretically relevant processes of industry emergence. In this c...

  3. Industry Lecture 2010

    DEFF Research Database (Denmark)

    Kragh, Helge

    2010-01-01

    Sammendrag af "Industry Lecture", Norsk Kjemisk Selskap, Universitetet i Oslo, givet 15/10 2010.......Sammendrag af "Industry Lecture", Norsk Kjemisk Selskap, Universitetet i Oslo, givet 15/10 2010....

  4. Rapid manufacturing facilitated customisation

    OpenAIRE

    Tuck, Christopher John; Hague, Richard; Ruffo, Massimiliano; Ransley, Michelle; Adams, Paul Russell

    2008-01-01

    Abstract This paper describes the production of body-fitting customised seat profiles utilising the following digital methods: three dimensional laser scanning, reverse engineering and Rapid Manufacturing (RM). The seat profiles have been manufactured in order to influence the comfort characteristics of an existing ejector seat manufactured by Martin Baker Aircraft Ltd. The seat, known as Navy Aircrew Common Ejection Seat (NACES), was originally designed with a generic profile. ...

  5. Rapid Detection of Pathogens

    Energy Technology Data Exchange (ETDEWEB)

    David Perlin

    2005-08-14

    Pathogen identification is a crucial first defense against bioterrorism. A major emphasis of our national biodefense strategy is to establish fast, accurate and sensitive assays for diagnosis of infectious diseases agents. Such assays will ensure early and appropriate treatment of infected patients. Rapid diagnostics can also support infection control measures, which monitor and limit the spread of infectious diseases agents. Many select agents are highly transmissible in the early stages of disease, and it is critical to identify infected patients and limit the risk to the remainder of the population and to stem potential panic in the general population. Nucleic acid-based molecular approaches for identification overcome many of the deficiencies associated with conventional culture methods by exploiting both large- and small-scale genomic differences between organisms. PCR-based amplification of highly conserved ribosomal RNA (rRNA) genes, intergenic sequences, and specific toxin genes is currently the most reliable approach for bacterial, fungal and many viral pathogenic agents. When combined with fluorescence-based oligonucleotide detection systems, this approach provides real-time, quantitative, high fidelity analysis capable of single nucleotide allelic discrimination (4). These probe systems offer rapid turn around time (<2 h) and are suitable for high throughput, automated multiplex operations that are critical for clinical diagnostic laboratories. In this pilot program, we have used molecular beacon technology invented at the Public health Research Institute to develop a new generation of molecular probes to rapidly detect important agents of infectious diseases. We have also developed protocols to rapidly extract nucleic acids from a variety of clinical specimen including and blood and tissue to for detection in the molecular assays. This work represented a cooperative research development program between the Kramer-Tyagi/Perlin labs on probe development

  6. Tiber Personal Rapid Transit

    Directory of Open Access Journals (Sweden)

    Diego Carlo D'agostino

    2011-02-01

    Full Text Available The project “Tiber Personal Rapid Transit” have been presented by the author at the Rome City Vision Competition1 2010, an ideas competition, which challenges architects, engineers, designers, students and creatives individuals to develop visionary urban proposals with the intention of stimulating and supporting the contemporary city, in this case Rome. The Tiber PRT proposal tries to answer the competition questions with the definition of a provocative idea: a Personal Rapid transit System on the Tiber river banks. The project is located in the central section of the Tiber river and aims at the renewal of the river banks with the insertion of a Personal Rapid Transit infrastructure. The project area include the riverbank of Tiber from Rome Transtevere RFI station to Piazza del Popolo, an area where main touristic and leisure attractions are located. The intervention area is actually no used by the city users and residents and constitute itself a strong barrier in the heart of the historic city.

  7. Conditions for industrial production

    DEFF Research Database (Denmark)

    Jensen, Karsten Ingerslev; Schultz, Jørgen Munthe; Brauer, H.

    1996-01-01

    The possibility of an industrial aerogel glazing production is discussed with respect to sample size, sales volume and prices. Different ways of an industrial assembling line is outlined and the total costs of a 1 square meter aerogel glazing is calculated.......The possibility of an industrial aerogel glazing production is discussed with respect to sample size, sales volume and prices. Different ways of an industrial assembling line is outlined and the total costs of a 1 square meter aerogel glazing is calculated....

  8. Decomposition methods for analyzing changes of industrial water use

    Science.gov (United States)

    Shang, Yizi; Lu, Shibao; Shang, Ling; Li, Xiaofei; Wei, Yongping; Lei, Xiaohui; Wang, Chao; Wang, Hao

    2016-12-01

    Changes in industrial water use are of the utmost significance in rapidly developing countries. Such countries are experience rapid industrialization, which may stimulate substantial increases in their future industrial water use. Local governments face challenges in formulating industrial policies for sustainable development, particularly in areas that experience severe water shortages. This study addresses the factors driving increased industrial water use and the degrees to which these factors contribute, and determines whether the trend will change in the future. This study explores the options for quantitative analysis that analyzes changes in industrial water use. We adopt both the refined Laspeyres and the Logarithmic Mean Divisia Index models to decompose the driving forces of industrial water use. Additionally, we validate the decomposition results through a comparative study using empirical analysis. Using Tianjin, a national water-saving city in China, as a case study, we compare the performance of the two models. In the study, the driving forces of changes in industrial water use are summarized as output, technological, and structural forces. The comparative results indicate that the refined Laspeyres model may be preferable for this case, and further reveal that output and technology have long-term, stable effects on industrial water use. However, structure may have an uncertain influence on industrial water use. The reduced water use may be a consequence of Tianjin's attempts to target water savings in other areas. Therefore, we advise the Tianjin local government to restructure local industries towards water-saving targets.

  9. Creative industries for society

    NARCIS (Netherlands)

    Dr. P. Rutten

    2014-01-01

    Rise of creative industries. Recognition of the importance of the creative industries is one of the notable developments of the fi rst 14 years of the twenty-fi rst century. The realisation has struck that, as the industrial share of the world economy dwindles, other forms of business are gaining in

  10. Contract Training for Industry.

    Science.gov (United States)

    Averill, Donald F.

    1983-01-01

    Describes contract training whereby industries arrange with community colleges, technical institutes, and vocational schools to prepare employees for specific job assignments. Indicates that industrial training performed under contract with public institutions should be encouraged in favor of expansion of training that industry performs for…

  11. The chaebol and the US military–industrial complex: Cold War geopolitical economy and South Korean industrialization

    OpenAIRE

    Jim Glassman; Young-Jin Choi

    2014-01-01

    Among scholars of East Asia, the role of US military offshore procurement (OSP) and the military–industrial complex (MIC) has been underplayed in explanations of rapid industrial transformation. Yet the foundations of industrialization in places such as South Korea, when analyzed in strongly ‘national–territorial’ and state-centric terms of the predominant, so-called ‘neo-Weberian’ accounts, remain inadequately illuminated. We argue that a geopolitical economy approach focusing on the roles o...

  12. Spring 2008 Industry Study: Financial Services Industry

    National Research Council Canada - National Science Library

    Calderon, Juan; Collins, Thomas W; Devinney, Edward; Driggers, Gene J; Dunmyer, Valrica; Flood, Paul; Gallant, Robin; Kekauoha, Stanford K; Krawietz, Anthony B; Kumashiro, Patrick T; LaDue, Paul W; LaFalce, John; Larson, Steven W; Lawrence, Steven J; Nettleton, John; Ostrowski, John A

    2008-01-01

    The extensive media coverage of the 2008 subprime crisis, both domestically and abroad, drives home the crucial role that the financial services industry plays for not only individual Americans, but for U.S. national security...

  13. The role of poultry industry in indian economy

    Directory of Open Access Journals (Sweden)

    SC Vetrivel

    2013-12-01

    Full Text Available Poultry farming in India, in spite of several constraints, has progressed considerably during the last decade. The present study has been undertaken to examine various aspects related to the growth and development of poultry production in the country. Poultry production in India was confined to backyards till recently. Local breed of birds were reared for the supply of eggs and meat. The increasing demand for poultry products necessitates augmenting the supply by importing improved breeds of poultry. In 1961, the proportion of hybrid populations in the total population of poultry was about 2 percent. Within a couple of decades, these birds have dominated the market sidelining the indigenous birds. The technological advances have revolutionized the role and the structure of poultry industry in India. It became one of the most specialized enterprises in many parts of the country. A general confidence has been created among the people that green revolution has ushered an era of self-reliance in the food grain production. The rapidly growing population has created some doubts in the said hypothesis. In fact, crop production alone may not solve the food problem of the country. The advances in cereal technology, of course, can fill the empty stomach, but it may not help in the balanced growth of the human body. The chief ingredients of balanced diet also comprise proteins, fats, minerals and vitamins, which are essential for growth. The supply of these items can easily be increased through increased production of livestock products.

  14. Antimicrobial susceptibility testing in biofilm‐growing bacteria

    National Research Council Canada - National Science Library

    Macià, M. D; Rojo‐Molinero, E; Oliver, A

    2014-01-01

    .... The lack of correlation between conventional susceptibility test results and therapeutic success in chronic infections is probably a consequence of the use of planktonically growing instead of biofilm‐growing bacteria...

  15. Formaldehyde removal by common indoor plant species and various growing media

    Science.gov (United States)

    Aydogan, Ahu; Montoya, Lupita D.

    2011-05-01

    Three porous materials (growstone, expanded clay and activated carbon) were evaluated as hydroponic growing media and for their individual ability to remove the indoor volatile organic compound formaldehyde under three conditions: growing medium alone, dry medium in a pot, and wet medium in a pot. The total percent-reduction of formaldehyde by each growing media was evaluated over a 10-h period. In all cases, activated carbon achieved the highest removal under the three conditions studied with average percent reductions measured at about 98%. Four common interior plants: Hedera helix (English ivy), Chrysanthemum morifolium (pot mum), Dieffenbachia compacta (dump cane) and Epipremnum aureum (golden pathos) growing in growstone were then tested for their ability to remove formaldehyde. The removal capacity of the aerial plant parts (AP), the root zone (RZ) and the entire plant (EP) growing in growstone were determined by exposing the relevant parts to gaseous formaldehyde (˜2000 μg m -3) in a closed chamber over a 24-h period. The removal efficiency between species and plant parts were compared by determining the time interval required to decrease about 2/3 of the total formaldehyde concentration reduction, T 2/3. The T 2/3 measured were 23, 30, 34 and 56 min for EP of C. morifolium, E. aureum, D. compacta and H. helix, respectively. The formaldehyde removal by the root zone was found to be more rapid than the removal by the aerial plant parts.

  16. Object-based change detection in rapid urbanization regions with remotely sensed observations: a case study of Shenzhen, China

    Science.gov (United States)

    He, Lihuang; Dong, Guihua; Wang, Wei-Min; Yang, Lijun; Liang, Hong

    2013-10-01

    China, the most populous country on Earth, has experienced rapid urbanization which is one of the main causes of many environmental and ecological problems. Therefore, the monitoring of rapid urbanization regions and the environment is of critical importance for their sustainable development. In this study, the object-based classification is employed to detect the change of land cover in Shenzhen, which is located in South China and has been urbanized rapidly in recent three decades. First, four Landsat TM images, which were acquired on 1990, 2000 and 2010, respectively, are selected from the image database. Atmospheric corrections are conducted on these images with improved dark-object subtraction technique and surface meteorological observations. Geometric correction is processed with ground control points derived from topographic maps. Second, a region growing multi-resolution segmentation and a soft nearest neighbour classifier are used to finish object-based classification. After analyzing the fraction of difference classes over time series, we conclude that the comparison of derived land cover classes with socio-economic statistics demonstrates the strong positive correlation between built-up classes and urban population as well as gross GDP and GDPs in second and tertiary industries. Two different mechanisms of urbanization, namely new land development and redevelopment, are revealed. Consequently, we found that, the districts of Shenzhen were urbanized through different mechanisms.

  17. Building a rapid learning health care system for oncology: the regulatory framework of CancerLinQ.

    Science.gov (United States)

    Schilsky, Richard L; Michels, Dina L; Kearbey, Amy H; Yu, Peter Paul; Hudis, Clifford A

    2014-08-01

    Today is a time of unprecedented opportunity and challenge in health care generally and cancer care in particular. An explosion of scientific knowledge, the rapid introduction of new drugs and technologies, and the unprecedented escalation in the cost of health care challenge physicians to quickly assimilate new information and appropriately deploy new advances while also delivering efficient and high-quality care to a rapidly growing and aging patient population. At the same time, big data, with its potential to drive rapid understanding and innovation, promises to transform the health care industry, as it has many others already. CancerLinQ is an initiative of the American Society of Clinical Oncology (ASCO) and its Institute for Quality, developed to build on these opportunities and address these challenges by collecting information from the electronic health records of large numbers of patients with cancer. CancerLinQ is, first and foremost, a quality measurement and reporting system through which oncologists can harness the depth and power of their patients' clinical records and other data to improve the care they deliver. The development and deployment of CancerLinQ raises many important questions about the use of big data in health care. This article focuses on the US federal regulatory pathway by which CancerLinQ will accept patient records and the approach of ASCO toward stewardship of the information. © 2014 by American Society of Clinical Oncology.

  18. Human domination of the biosphere: Rapid discharge of the earth-space battery foretells the future of humankind.

    Science.gov (United States)

    Schramski, John R; Gattie, David K; Brown, James H

    2015-08-04

    Earth is a chemical battery where, over evolutionary time with a trickle-charge of photosynthesis using solar energy, billions of tons of living biomass were stored in forests and other ecosystems and in vast reserves of fossil fuels. In just the last few hundred years, humans extracted exploitable energy from these living and fossilized biomass fuels to build the modern industrial-technological-informational economy, to grow our population to more than 7 billion, and to transform the biogeochemical cycles and biodiversity of the earth. This rapid discharge of the earth's store of organic energy fuels the human domination of the biosphere, including conversion of natural habitats to agricultural fields and the resulting loss of native species, emission of carbon dioxide and the resulting climate and sea level change, and use of supplemental nuclear, hydro, wind, and solar energy sources. The laws of thermodynamics governing the trickle-charge and rapid discharge of the earth's battery are universal and absolute; the earth is only temporarily poised a quantifiable distance from the thermodynamic equilibrium of outer space. Although this distance from equilibrium is comprised of all energy types, most critical for humans is the store of living biomass. With the rapid depletion of this chemical energy, the earth is shifting back toward the inhospitable equilibrium of outer space with fundamental ramifications for the biosphere and humanity. Because there is no substitute or replacement energy for living biomass, the remaining distance from equilibrium that will be required to support human life is unknown.

  19. Growing skull fracture stages and treatment strategy.

    Science.gov (United States)

    Liu, Xue-Song; You, Chao; Lu, Ma; Liu, Jia-Gang

    2012-06-01

    A growing skull fracture (GSF) is a rare but significant late complication of skull fractures, usually occurring during infancy and early childhood. Delayed diagnosis and improper treatment could exacerbate this disease. The aim of this study was to introduce a new hypothesis about, describe the stages of, and discuss the treatment strategy for GSF. The authors performed a retrospective review of 27 patients with GSF, who were grouped according to 3 different GSF stages. Over a period of 20 years, 27 patients with GSF (16 males and 11 females) were treated in the authors' department. The mean follow-up period was 26.5 months. Six patients were in the prephase of GSF (Stage 1), 10 patients in the early phase (Stage 2), and 11 in the late phase (Stage 3). All patients underwent duraplasty. All 6 patients at Stage 1 and 5 patients at Stage 2 underwent craniotomy without cranioplasty. Five patients at Stage 2 and all of the patients at Stage 3 underwent cranioplasty with autologous bone and alloplastic materials, respectively. Among all patients, 5 underwent ventriculoperitoneal shunt placement. Symptoms in all patients at Stages 1 and 2 were alleviated or disappeared, and the cranial bones developed without deformity during follow-up. Among patients with Stage 3 GSF, no obvious improvement in neurological deficits was observed. Three patients underwent additional operations because of cranial deformation or infection. The authors identify the stages of GSF according to a new hypothesis. They conclude that accurately diagnosing and treating GSF during Stages 1 and 2 leads to a better prognosis.

  20. [Lung cancer and COPD - growing clinical problem].

    Science.gov (United States)

    Tyl, Michal; Domagała-Kulawik, Joanna

    2017-07-21

    A spread of the addiction of tobacco smoking is valued on near 1 billion of people in the world, that involves growing number of morbidity and mortality by the reason of smoke related diseases. Lung cancer and chronic obstructive pulmonary disease (COPD) are the most serious and incurable diseases which are leading to a permanent disability as well as to premature death. There are factors that naturally increase the vulnerability of an individual on the coincidence of above disorders, such as pathophysiological conditions, systemic inflammation, bronchitis, emphysema, respiratory obstructive disease and precise genetic predispositions for COPD and lung cancer. The harmful substances of the tobacco smoke are the causes of the development of diseases outside the group of respiratory disorders which affects the greater scope of comorbidity among this patient group in comparison to the normal population. The similarity of the clinical picture of lung cancer and COPD may cause numerous problems for a proper and prompt diagnosis and the implementation of the appropriate treatment. On the other hand, it is evident that the patients with COPD are carefully examined and often diagnosed with cancer while those who already suffer from cancer and undertake additional function testing are in 40-50% diagnosed with COPD. The coexistance of these two diseases influences the therapeutic procedure: COPD limits the possibilities of a radical lung cancer treatment which is determined by the general health condition and the respiratory system insufficiency as far as COPD patients are concerned. The knowledge of common pathogenesis both of cancer and COPD and the mutual relations between them shall positively affect the diagnostic and therapeutic process in the high-risk patient groups.