The Rapid Ice Sheet Change Observatory (RISCO)

Science.gov (United States)

Morin, P.; Howat, I. M.; Ahn, Y.; Porter, C.; McFadden, E. M.

2010-12-01

The recent expansion of observational capacity from space has revealed dramatic, rapid changes in the Earth’s ice cover. These discoveries have fundamentally altered how scientists view ice-sheet change. Instead of just slow changes in snow accumulation and melting over centuries or millennia, important changes can occur in sudden events lasting only months, weeks, or even a single day. Our understanding of these short time- and space-scale processes, which hold important implications for future global sea level rise, has been impeded by the low temporal and spatial resolution, delayed sensor tasking, incomplete coverage, inaccessibility and/or high cost of data available to investigators. New cross-agency partnerships and data access policies provide the opportunity to dramatically improve the resolution of ice sheet observations by an order of magnitude, from timescales of months and distances of 10’s of meters, to days and meters or less. Advances in image processing technology also enable application of currently under-utilized datasets. The infrastructure for systematically gathering, processing, analyzing and distributing these data does not currently exist. Here we present the development of a multi-institutional, multi-platform observatory for rapid ice change with the ultimate objective of helping to elucidate the relevant timescales and processes of ice sheet dynamics and response to climate change. The Rapid Ice Sheet Observatory (RISCO) gathers observations of short time- and space-scale Cryosphere events and makes them easily accessible to investigators, media and general public. As opposed to existing data centers, which are structured to archive and distribute diverse types of raw data to end users with the specialized software and skills to analyze them, RISCO focuses on three types of geo-referenced raster (image) data products in a format immediately viewable with commonly available software. These three products are (1) sequences of images

Missile signal processing common computer architecture for rapid technology upgrade

Science.gov (United States)

Rabinkin, Daniel V.; Rutledge, Edward; Monticciolo, Paul

2004-10-01

Interceptor missiles process IR images to locate an intended target and guide the interceptor towards it. Signal processing requirements have increased as the sensor bandwidth increases and interceptors operate against more sophisticated targets. A typical interceptor signal processing chain is comprised of two parts. Front-end video processing operates on all pixels of the image and performs such operations as non-uniformity correction (NUC), image stabilization, frame integration and detection. Back-end target processing, which tracks and classifies targets detected in the image, performs such algorithms as Kalman tracking, spectral feature extraction and target discrimination. In the past, video processing was implemented using ASIC components or FPGAs because computation requirements exceeded the throughput of general-purpose processors. Target processing was performed using hybrid architectures that included ASICs, DSPs and general-purpose processors. The resulting systems tended to be function-specific, and required custom software development. They were developed using non-integrated toolsets and test equipment was developed along with the processor platform. The lifespan of a system utilizing the signal processing platform often spans decades, while the specialized nature of processor hardware and software makes it difficult and costly to upgrade. As a result, the signal processing systems often run on outdated technology, algorithms are difficult to update, and system effectiveness is impaired by the inability to rapidly respond to new threats. A new design approach is made possible three developments; Moore's Law - driven improvement in computational throughput; a newly introduced vector computing capability in general purpose processors; and a modern set of open interface software standards. Today's multiprocessor commercial-off-the-shelf (COTS) platforms have sufficient throughput to support interceptor signal processing requirements. This application

Development of a rapid multi-line detector for industrial computed tomography

International Nuclear Information System (INIS)

Nachtrab, Frank; Firsching, Markus; Hofmann, Thomas; Uhlmann, Norman; Neubauer, Harald; Nowak, Arne

2015-01-01

In this paper we present the development of a rapid multi-row detector is optimized for industrial computed tomography. With a high frame rate, high spatial resolution and the ability to use up to 450 kVp it is particularly suitable for applications such as fast acquisition of large objects, inline CT or time-resolved 4D CT. (Contains PowerPoint slides). [de

A novel technique for presurgical nasoalveolar molding using computer-aided reverse engineering and rapid prototyping.

Science.gov (United States)

Yu, Quan; Gong, Xin; Wang, Guo-Min; Yu, Zhe-Yuan; Qian, Yu-Fen; Shen, Gang

2011-01-01

To establish a new method of presurgical nasoalveolar molding (NAM) using computer-aided reverse engineering and rapid prototyping technique in infants with unilateral cleft lip and palate (UCLP). Five infants (2 males and 3 females with mean age of 1.2 w) with complete UCLP were recruited. All patients were subjected to NAM before the cleft lip repair. The upper denture casts were recorded using a three-dimensional laser scanner within 2 weeks after birth in UCLP infants. A digital model was constructed and analyzed to simulate the NAM procedure with reverse engineering software. The digital geometrical data were exported to print the solid model with rapid prototyping system. The whole set of appliances was fabricated based on these solid models. Laser scanning and digital model construction simplified the NAM procedure and estimated the treatment objective. The appliances were fabricated based on the rapid prototyping technique, and for each patient, the complete set of appliances could be obtained at one time. By the end of presurgical NAM treatment, the cleft was narrowed, and the malformation of nasoalveolar segments was aligned normally. We have developed a novel technique of presurgical NAM based on a computer-aided design. The accurate digital denture model of UCLP infants could be obtained with laser scanning. The treatment design and appliance fabrication could be simplified with a computer-aided reverse engineering and rapid prototyping technique.

Ecosystem stewardship: sustainability strategies for a rapidly changing planet

Science.gov (United States)

F. Stuart Chapin; Stephen R. Carpenter; Gary P. Kofinas; Carl Folke; Nick Abel; William C. Clark; Per Olsson; D. Mark Stafford Smith; Brian Walker; Oran R. Young; Fikret Berkes; Reinette Biggs; J. Morgan Grove; Rosamond L. Naylor; Evelyn Pinkerton; Will Steffen; Frederick J. Swanson

2010-01-01

Ecosystem stewardship is an action-oriented framework intended to foster the social-ecological sustainability of a rapidly changing planet. Recent developments identify three strategies that make optimal use of current understanding in an environment of inevitable uncertainty and abrupt change: reducing the magnitude of, and exposure and sensitivity to, known stresses...

Computer use changes generalization of movement learning.

Science.gov (United States)

Wei, Kunlin; Yan, Xiang; Kong, Gaiqing; Yin, Cong; Zhang, Fan; Wang, Qining; Kording, Konrad Paul

2014-01-06

Over the past few decades, one of the most salient lifestyle changes for us has been the use of computers. For many of us, manual interaction with a computer occupies a large portion of our working time. Through neural plasticity, this extensive movement training should change our representation of movements (e.g., [1-3]), just like search engines affect memory [4]. However, how computer use affects motor learning is largely understudied. Additionally, as virtually all participants in studies of perception and actions are computer users, a legitimate question is whether insights from these studies bear the signature of computer-use experience. We compared non-computer users with age- and education-matched computer users in standard motor learning experiments. We found that people learned equally fast but that non-computer users generalized significantly less across space, a difference negated by two weeks of intensive computer training. Our findings suggest that computer-use experience shaped our basic sensorimotor behaviors, and this influence should be considered whenever computer users are recruited as study participants. Copyright © 2014 Elsevier Ltd. All rights reserved.

Computer jargon explained

CERN Document Server

Enticknap, Nicholas

2014-01-01

Computer Jargon Explained is a feature in Computer Weekly publications that discusses 68 of the most commonly used technical computing terms. The book explains what the terms mean and why the terms are important to computer professionals. The text also discusses how the terms relate to the trends and developments that are driving the information technology industry. Computer jargon irritates non-computer people and in turn causes problems for computer people. The technology and the industry are changing so rapidly; it is very hard even for professionals to keep updated. Computer people do not

Rethinking species’ ability to cope with rapid climate change

DEFF Research Database (Denmark)

Hof, Christian; Levinsky, Irina; Bastos Araujo, Miguel

2011-01-01

Ongoing climate change is assumed to be exceptional because of its unprecedented velocity. However, new geophysical research suggests that dramatic climatic changes during the Late Pleistocene occurred extremely rapid, over just a few years. These abrupt climatic changes may have been even faster...... than contemporary ones, but relatively few continent-wide extinctions of species have been documented for these periods. This raises questions about the ability of extant species to adapt to ongoing climate change. We propose that the advances in geophysical research challenge current views about...... species' ability to cope with climate change, and that lessons must be learned for modelling future impacts of climate change on species....

On being a scientist in a rapidly changing world.

Science.gov (United States)

Mandel, I D

1996-02-01

The practice of biological science has changed dramatically since mid-century, reshaped not only by a rapid series of landmark discoveries, but also by governmental directives, institutional policies, and public attitudes. Until 1964, the major influences were the mentor, who provided direction and indoctrination into the culture of science, and in dentistry, the newly established NIDR, which fueled the research engine with an expanding research and training program. The 1965-74 period witnessed the advent of the Institutional Review Board, an increased social involvement of biological scientists, and a recognition of the need for biological and physical safeguards in the conduct of research. The most turbulent years were 1975-89, when there was a confluence of animal rights activism and regulation, growing concerns with scientific fraud and publication malpractice, and the stresses and strains (and opportunities) resulting from the rapid expansion of the academic-industrial complex. The current period is characterized by rapid pace, high volume, and an increased depth and breadth of knowledge-a major change in scale in the conduct of science. It is an exciting time but one in which ethical issues are multiplying. Attention must be paid.

CARES (Computer Analysis for Rapid Evaluation of Structures) Version 1.0, seismic module

International Nuclear Information System (INIS)

Xu, J.; Philippacopoulas, A.J.; Miller, C.A.; Costantino, C.J.

1990-07-01

During FY's 1988 and 1989, Brookhaven National Laboratory (BNL) developed the CARES system (Computer Analysis for Rapid Evaluation of Structures) for the US Nuclear Regulatory Commission (NRC). CARES is a PC software system which has been designed to perform structural response computations similar to those encountered in licensing reviews of nuclear power plant structures. The documentation of the Seismic Module of CARES consists of three volumes. This report is Volume 2 of the three volume documentation of the Seismic Module of CARES and represents the User's Manual. 14 refs

International assessment of functional computer abilities

NARCIS (Netherlands)

Anderson, Ronald E.; Collis, Betty

1993-01-01

After delineating the major rationale for computer education, data are presented from Stage 1 of the IEA Computers in Education Study showing international comparisons that may reflect differential priorities. Rapid technological change and the lack of consensus on goals of computer education

A rapid method for the computation of equilibrium chemical composition of air to 15000 K

Science.gov (United States)

Prabhu, Ramadas K.; Erickson, Wayne D.

1988-01-01

A rapid computational method has been developed to determine the chemical composition of equilibrium air to 15000 K. Eleven chemically reacting species, i.e., O2, N2, O, NO, N, NO+, e-, N+, O+, Ar, and Ar+ are included. The method involves combining algebraically seven nonlinear equilibrium equations and four linear elemental mass balance and charge neutrality equations. Computational speeds for determining the equilibrium chemical composition are significantly faster than the often used free energy minimization procedure. Data are also included from which the thermodynamic properties of air can be computed. A listing of the computer program together with a set of sample results are included.

CARES (Computer Analysis for Rapid Evaluation of Structures) Version 1.0, seismic module

International Nuclear Information System (INIS)

Xu, J.; Philippacopoulas, A.J.; Miller, C.A.; Costantino, C.J.

1990-07-01

During FY's 1988 and 1989, Brookhaven National Laboratory (BNL) developed the CARES system (Computer Analysis for Rapid Evaluation of Structures) for the US Nuclear Regulatory Commission (NRC). CARES is a PC software system which has been designed to perform structural response computations similar to those encountered in licensing reviews of nuclear power plant structures. The documentation of the Seismic Module of CARES consists of three volumes. This report represents Volume 3 of the volume documentation of the Seismic Module of CARES. It presents three sample problems typically encountered in the Soil-Structure Interaction analyses. 14 refs., 36 figs., 2 tabs

Rapid changes in the range limits of Scots pine 4000 years ago

International Nuclear Information System (INIS)

Gear, A.J.; Huntley, B.

1991-01-01

Paleoecological data provide estimates of response rates to past climate changes. Fossil Pinus sylvestris stumps in far northern Scotland demonstrate former presence of pine trees where conventional pollen evidence of pine forests is lacking. Radiocarbon, dendrochronological, and fine temporal-resolution palynological data show that pine forest were present for about four centuries some 4,000 years ago; the forests expanded and then retreated rapidly some 70 to 80 kilometers. Despite the rapidity of this response to climate change, it occurred at rates slower by an order of magnitude than those necessary to maintain equilibrium with forecast climate changes attributed to the greenhouse effect

Rapid Change Detection Algorithm for Disaster Management

Science.gov (United States)

Michel, U.; Thunig, H.; Ehlers, M.; Reinartz, P.

2012-07-01

This paper focuses on change detection applications in areas where catastrophic events took place which resulted in rapid destruction especially of manmade objects. Standard methods for automated change detection prove not to be sufficient; therefore a new method was developed and tested. The presented method allows a fast detection and visualization of change in areas of crisis or catastrophes. While often new methods of remote sensing are developed without user oriented aspects, organizations and authorities are not able to use these methods because of absence of remote sensing know how. Therefore a semi-automated procedure was developed. Within a transferable framework, the developed algorithm can be implemented for a set of remote sensing data among different investigation areas. Several case studies are the base for the retrieved results. Within a coarse dividing into statistical parts and the segmentation in meaningful objects, the framework is able to deal with different types of change. By means of an elaborated Temporal Change Index (TCI) only panchromatic datasets are used to extract areas which are destroyed, areas which were not affected and in addition areas where rebuilding has already started.

Rapid change of field line connectivity and reconnection in stochastic magnetic fields

International Nuclear Information System (INIS)

Huang, Yi-Min; Bhattacharjee, A.; Boozer, Allen H.

2014-01-01

Magnetic fields without a direction of continuous symmetry have the generic feature that neighboring field lines exponentiate away from each other and become stochastic, and hence the ideal constraint of preserving magnetic field line connectivity becomes exponentially sensitive to small deviations from ideal Ohm's law. The idea of breaking field line connectivity by stochasticity as a mechanism for fast reconnection is tested with numerical simulations based on reduced magnetohydrodynamics equations with a strong guide field line-tied to two perfectly conducting end plates. Starting from an ideally stable force-free equilibrium, the system is allowed to undergo resistive relaxation. Two distinct phases are found in the process of resistive relaxation. During the quasi-static phase, rapid change of field line connectivity and strong induced flow are found in regions of high field line exponentiation. However, although the field line connectivity of individual field lines can change rapidly, the overall pattern of field line mapping appears to deform gradually. From this perspective, field line exponentiation appears to cause enhanced diffusion rather than reconnection. In some cases, resistive quasi-static evolution can cause the ideally stable initial equilibrium to cross a stability threshold, leading to formation of intense current filaments and rapid change of field line mapping into a qualitatively different pattern. It is in this onset phase that the change of field line connectivity is more appropriately designated as magnetic reconnection. Our results show that rapid change of field line connectivity appears to be a necessary, but not a sufficient condition for fast reconnection.

CARES (Computer Analysis for Rapid Evaluation of Structures) Version 1.0, seismic module

International Nuclear Information System (INIS)

Xu, J.; Philippacopoulas, A.J.; Miller, C.A.; Costantino, C.J.

1990-07-01

During FY's 1988 and 1989, Brookhaven National Laboratory (BNL) developed the CARES system (Computer Analysis for Rapid Evaluation of Structures) for the US Nuclear Regulatory Commission (NRC). CARES is a PC software system which has been designed to perform structural response computations similar to those encountered in licencing reviews of nuclear power plant structures. The docomentation of the Seismic Module of CARES consists of three volumes. This report represents Volume 1 of the three volume documentation of the Seismic Module of CARES. It concentrates on the theoretical basis of the system and presents modeling assumptions and limitations as well as solution schemes and algorithms of CARES. 31 refs., 6 figs

Indigenous people's detection of rapid ecological change.

Science.gov (United States)

Aswani, Shankar; Lauer, Matthew

2014-06-01

When sudden catastrophic events occur, it becomes critical for coastal communities to detect and respond to environmental transformations because failure to do so may undermine overall ecosystem resilience and threaten people's livelihoods. We therefore asked how capable of detecting rapid ecological change following massive environmental disruptions local, indigenous people are. We assessed the direction and periodicity of experimental learning of people in the Western Solomon Islands after a tsunami in 2007. We compared the results of marine science surveys with local ecological knowledge of the benthos across 3 affected villages and 3 periods before and after the tsunami. We sought to determine how people recognize biophysical changes in the environment before and after catastrophic events such as earthquakes and tsunamis and whether people have the ability to detect ecological changes over short time scales or need longer time scales to recognize changes. Indigenous people were able to detect changes in the benthos over time. Detection levels differed between marine science surveys and local ecological knowledge sources over time, but overall patterns of statistically significant detection of change were evident for various habitats. Our findings have implications for marine conservation, coastal management policies, and disaster-relief efforts because when people are able to detect ecological changes, this, in turn, affects how they exploit and manage their marine resources. © 2014 Society for Conservation Biology.

Middle Holocene rapid environmental changes and human adaptation in Greece

Science.gov (United States)

Lespez, Laurent; Glais, Arthur; Lopez-Saez, José-Antonio; Le Drezen, Yann; Tsirtsoni, Zoï; Davidson, Robert; Biree, Laetitia; Malamidou, Dimitra

2016-03-01

Numerous researchers discuss of the collapse of civilizations in response to abrupt climate change in the Mediterranean region. The period between 6500 and 5000 cal yr BP is one of the least studied episodes of rapid climate change at the end of the Late Neolithic. This period is characterized by a dramatic decline in settlement and a cultural break in the Balkans. High-resolution paleoenvironmental proxy data obtained in the Lower Angitis Valley enables an examination of the societal responses to rapid climatic change in Greece. Development of a lasting fluvio-lacustrine environment followed by enhanced fluvial activity is evident from 6000 cal yr BP. Paleoecological data show a succession of dry events at 5800-5700, 5450 and 5000-4900 cal yr BP. These events correspond to incursion of cold air masses to the eastern Mediterranean, confirming the climatic instability of the middle Holocene climate transition. Two periods with farming and pastural activities (6300-5600 and 5100-4700 cal BP) are evident. The intervening period is marked by environmental changes, but the continuous occurrence of anthropogenic taxa suggests the persistence of human activities despite the absence of archaeological evidence. The environmental factors alone were not sufficient to trigger the observed societal changes.

The DIII-D Computing Environment: Characteristics and Recent Changes

International Nuclear Information System (INIS)

McHarg, B.B. Jr.

1999-01-01

The DIII-D tokamak national fusion research facility along with its predecessor Doublet III has been operating for over 21 years. The DIII-D computing environment consists of real-time systems controlling the tokamak, heating systems, and diagnostics, and systems acquiring experimental data from instrumentation; major data analysis server nodes performing short term and long term data access and data analysis; and systems providing mechanisms for remote collaboration and the dissemination of information over the world wide web. Computer systems for the facility have undergone incredible changes over the course of time as the computer industry has changed dramatically. Yet there are certain valuable characteristics of the DIII-D computing environment that have been developed over time and have been maintained to this day. Some of these characteristics include: continuous computer infrastructure improvements, distributed data and data access, computing platform integration, and remote collaborations. These characteristics are being carried forward as well as new characteristics resulting from recent changes which have included: a dedicated storage system and a hierarchical storage management system for raw shot data, various further infrastructure improvements including deployment of Fast Ethernet, the introduction of MDSplus, LSF and common IDL based tools, and improvements to remote collaboration capabilities. This paper will describe this computing environment, important characteristics that over the years have contributed to the success of DIII-D computing systems, and recent changes to computer systems

The Chinese experience of rapid modernization: sociocultural changes, psychological consequences?

Directory of Open Access Journals (Sweden)

Jiahong eSun

2016-04-01

Full Text Available Mainland China has undergone profound changes dating back to the nineteenth century, including a contemporary period of rapid modernization that began in the 1980s. The result has been dramatic social, cultural, and economic shifts impacting the daily lives of Chinese people. In this paper, we explore the psychological implications of sociocultural transformation in China, emphasizing two central themes. First, rising individualism: findings from social and developmental psychology suggest that China’s rapid development has been accompanied by ever-increasing adherence to individualistic values. Second, rising rates of depression: findings from psychiatric epidemiology point to increasing prevalence of depression over this same time period, particularly in rural settings. We argue that links between sociocultural and psychological shifts in China can be usefully studied through a cultural psychology lens, emphasizing the mutual constitution of culture, mind, and brain. In particular, we note that the link between social change, individualism, and rising mental illness deserves careful attention. Our review suggests that shifting values and socialization practices shape emotion norms of concealment and display, with implications for depressive symptom presentation. The challenge comes with interpretation. Increasing prevalence rates of depression may indeed be a general response to the rapidity of sociocultural change, or a specific consequence of rising individualism—but may also result from increasingly ‘Western’ patterns of symptom presentation, or improvements in diagnostic practice. We conclude by considering the challenges posed to standard universal models of psychological phenomena.

The Chinese Experience of Rapid Modernization: Sociocultural Changes, Psychological Consequences?

Science.gov (United States)

Sun, Jiahong; Ryder, Andrew G.

2016-01-01

Mainland China has undergone profound changes dating back to the nineteenth century, including a contemporary period of rapid modernization that began in the 1980s. The result has been dramatic social, cultural, and economic shifts impacting the daily lives of Chinese people. In this paper, we explore the psychological implications of sociocultural transformation in China, emphasizing two central themes. First, rising individualism: findings from social and developmental psychology suggest that China’s rapid development has been accompanied by ever-increasing adherence to individualistic values. Second, rising rates of depression: findings from psychiatric epidemiology point to increasing prevalence of depression over this same time period, particularly in rural settings. We argue that links between sociocultural and psychological shifts in China can be usefully studied through a cultural psychology lens, emphasizing the mutual constitution of culture, mind, and brain. In particular, we note that the link between social change, individualism, and rising mental illness deserves careful attention. Our review suggests that shifting values and socialization practices shape emotion norms of concealment and display, with implications for depressive symptom presentation. The challenge comes with interpretation. Increasing prevalence rates of depression may indeed be a general response to the rapidity of sociocultural change, or a specific consequence of rising individualism—but may also result from increasingly ‘Western’ patterns of symptom presentation, or improvements in diagnostic practice. We conclude by considering the challenges posed to standard universal models of psychological phenomena. PMID:27092093

Rapid ecosystem change challenges the adaptive capacity of Local Environmental Knowledge.

Science.gov (United States)

Fernández-Llamazares, Álvaro; Díaz-Reviriego, Isabel; Luz, Ana C; Cabeza, Mar; Pyhälä, Aili; Reyes-García, Victoria

2015-03-01

The use of Local Environmental Knowledge has been considered as an important strategy for adaptive management in the face of Global Environmental Change. However, the unprecedented rates at which global change occurs may pose a challenge to the adaptive capacity of local knowledge systems. In this paper, we use the concept of the shifting baseline syndrome to examine the limits in the adaptive capacity of the local knowledge of an indigenous society facing rapid ecosystem change. We conducted semi-structured interviews regarding perceptions of change in wildlife populations and in intergenerational transmission of knowledge amongst the Tsimane', a group of hunter-gatherers of Bolivian Amazonia ( n = 300 adults in 13 villages). We found that the natural baseline against which the Tsimane' measure ecosystem changes might be shifting with every generation as a result of (a) age-related differences in the perception of change and (b) a decrease in the intergenerational sharing of environmental knowledge. Such findings suggest that local knowledge systems might not change at a rate quick enough to adapt to conditions of rapid ecosystem change, hence potentially compromising the adaptive success of the entire social-ecological system. With the current pace of Global Environmental Change, widening the gap between the temporal rates of on-going ecosystem change and the timescale needed for local knowledge systems to adjust to change, efforts to tackle the shifting baseline syndrome are urgent and critical for those who aim to use Local Environmental Knowledge as a tool for adaptive management.

Computer-facilitated rapid HIV testing in emergency care settings: provider and patient usability and acceptability.

Science.gov (United States)

Spielberg, Freya; Kurth, Ann E; Severynen, Anneleen; Hsieh, Yu-Hsiang; Moring-Parris, Daniel; Mackenzie, Sara; Rothman, Richard

2011-06-01

Providers in emergency care settings (ECSs) often face barriers to expanded HIV testing. We undertook formative research to understand the potential utility of a computer tool, "CARE," to facilitate rapid HIV testing in ECSs. Computer tool usability and acceptability were assessed among 35 adult patients, and provider focus groups were held, in two ECSs in Washington State and Maryland. The computer tool was usable by patients of varying computer literacy. Patients appreciated the tool's privacy and lack of judgment and their ability to reflect on HIV risks and create risk reduction plans. Staff voiced concerns regarding ECS-based HIV testing generally, including resources for follow-up of newly diagnosed people. Computer-delivered HIV testing support was acceptable and usable among low-literacy populations in two ECSs. Such tools may help circumvent some practical barriers associated with routine HIV testing in busy settings though linkages to care will still be needed.

International assessment of functional computer abilities

OpenAIRE

Anderson, Ronald E.; Collis, Betty

1993-01-01

After delineating the major rationale for computer education, data are presented from Stage 1 of the IEA Computers in Education Study showing international comparisons that may reflect differential priorities. Rapid technological change and the lack of consensus on goals of computer education impedes the establishment of stable curricula for ¿general computer education¿ or computer literacy. In this context the construction of instruments for student assessment remains a challenge. Seeking to...

The Change to Administrative Computing in Schools.

Science.gov (United States)

Brown, Daniel J.

1984-01-01

Describes a study of the process of school office automation which focuses on personnel reactions to administrative computing, what users view as advantages and disadvantages of the automation, perceived barriers and facilitators of the change to automation, school personnel view of long term effects, and implications for school computer policy.…

Understanding rapid theoretical change in particle physics: a month-by-month co-citation analysis

International Nuclear Information System (INIS)

Sullivan, D.; Koester, D.; White, D.H.; Kern, R.

1979-01-01

While co-citation analysis has proved a powerful tool in the study of changes in intellectual foci in science, no one has ever used the technique to study very rapid changes in the theoretical structure of a scientific field. This paper presents month-by-month co-citation analyses of key phases in the weak-electromagnetic unification research program within particle physics, and shows that these analyses capture and illuminate very rapid intellectual changes. These data provide yet another illustration of the utility of co-citation analysis for understanding the history of science. 8 figures

A novel brain-computer interface based on the rapid serial visual presentation paradigm.

Science.gov (United States)

Acqualagna, Laura; Treder, Matthias Sebastian; Schreuder, Martijn; Blankertz, Benjamin

2010-01-01

Most present-day visual brain computer interfaces (BCIs) suffer from the fact that they rely on eye movements, are slow-paced, or feature a small vocabulary. As a potential remedy, we explored a novel BCI paradigm consisting of a central rapid serial visual presentation (RSVP) of the stimuli. It has a large vocabulary and realizes a BCI system based on covert non-spatial selective visual attention. In an offline study, eight participants were presented sequences of rapid bursts of symbols. Two different speeds and two different color conditions were investigated. Robust early visual and P300 components were elicited time-locked to the presentation of the target. Offline classification revealed a mean accuracy of up to 90% for selecting the correct symbol out of 30 possibilities. The results suggest that RSVP-BCI is a promising new paradigm, also for patients with oculomotor impairments.

Rapid Communication: v= 2 seniority changing transitions in yrast 3 ...

Indian Academy of Sciences (India)

Home; Journals; Pramana – Journal of Physics; Volume 89; Issue 5. Rapid Communication: Δ υ = 2 seniority changing transitions in yrast 3 − states and B ( E 3 ) systematics of Sn isotopes. BHOOMIKA MAHESHWARI SWATI GARG ASHOK KUMAR JAIN. Research Article Volume 89 Issue 5 November 2017 Article ID 75 ...

San Francisco Bay Area Rapid Transit District (BART) climate change adaptation assessment pilot.

Science.gov (United States)

2013-12-01

The objective of this pilot study was to evaluate the impacts of climate change on the San Francisco Bay Area Rapid Transit District : (BART) infrastructure and to develop and implement adaptation strategies against those impacts. Climate change haza...

Neurogenomics and the role of a large mutational target on rapid behavioral change.

Science.gov (United States)

Stanley, Craig E; Kulathinal, Rob J

2016-11-08

Behavior, while complex and dynamic, is among the most diverse, derived, and rapidly evolving traits in animals. The highly labile nature of heritable behavioral change is observed in such evolutionary phenomena as the emergence of converged behaviors in domesticated animals, the rapid evolution of preferences, and the routine development of ethological isolation between diverging populations and species. In fact, it is believed that nervous system development and its potential to evolve a seemingly infinite array of behavioral innovations played a major role in the successful diversification of metazoans, including our own human lineage. However, unlike other rapidly evolving functional systems such as sperm-egg interactions and immune defense, the genetic basis of rapid behavioral change remains elusive. Here we propose that the rapid divergence and widespread novelty of innate and adaptive behavior is primarily a function of its genomic architecture. Specifically, we hypothesize that the broad diversity of behavioral phenotypes present at micro- and macroevolutionary scales is promoted by a disproportionately large mutational target of neurogenic genes. We present evidence that these large neuro-behavioral targets are significant and ubiquitous in animal genomes and suggest that behavior's novelty and rapid emergence are driven by a number of factors including more selection on a larger pool of variants, a greater role of phenotypic plasticity, and/or unique molecular features present in large genes. We briefly discuss the origins of these large neurogenic genes, as they relate to the remarkable diversity of metazoan behaviors, and highlight key consequences on both behavioral traits and neurogenic disease across, respectively, evolutionary and ontogenetic time scales. Current approaches to studying the genetic mechanisms underlying rapid phenotypic change primarily focus on identifying signatures of Darwinian selection in protein-coding regions. In contrast

Rapid changes in gene expression direct rapid shifts in intestinal form and function in the Burmese python after feeding.

Science.gov (United States)

Andrew, Audra L; Card, Daren C; Ruggiero, Robert P; Schield, Drew R; Adams, Richard H; Pollock, David D; Secor, Stephen M; Castoe, Todd A

2015-05-01

Snakes provide a unique and valuable model system for studying the extremes of physiological remodeling because of the ability of some species to rapidly upregulate organ form and function upon feeding. The predominant model species used to study such extreme responses has been the Burmese python because of the extreme nature of postfeeding response in this species. We analyzed the Burmese python intestine across a time series, before, during, and after feeding to understand the patterns and timing of changes in gene expression and their relationship to changes in intestinal form and function upon feeding. Our results indicate that >2,000 genes show significant changes in expression in the small intestine following feeding, including genes involved in intestinal morphology and function (e.g., hydrolases, microvillus proteins, trafficking and transport proteins), as well as genes involved in cell division and apoptosis. Extensive changes in gene expression occur surprisingly rapidly, within the first 6 h of feeding, coincide with changes in intestinal morphology, and effectively return to prefeeding levels within 10 days. Collectively, our results provide an unprecedented portrait of parallel changes in gene expression and intestinal morphology and physiology on a scale that is extreme both in the magnitude of changes, as well as in the incredibly short time frame of these changes, with up- and downregulation of expression and function occurring in the span of 10 days. Our results also identify conserved vertebrate signaling pathways that modulate these responses, which may suggest pathways for therapeutic modulation of intestinal function in humans. Copyright © 2015 the American Physiological Society.

New type of Piezoresistive Pressure Sensors for Environments with Rapidly Changing Temperature

Directory of Open Access Journals (Sweden)

Tykhan Myroslav

2017-03-01

Full Text Available The theoretical aspects of a new type of piezo-resistive pressure sensors for environments with rapidly changing temperatures are presented. The idea is that the sensor has two identical diaphragms which have different coefficients of linear thermal expansion. Therefore, when measuring pressure in environments with variable temperature, the diaphragms will have different deflection. This difference can be used to make appropriate correction of the sensor output signal and, thus, to increase accuracy of measurement. Since physical principles of sensors operation enable fast correction of the output signal, the sensor can be used in environments with rapidly changing temperature, which is its essential advantage. The paper presents practical implementation of the proposed theoretical aspects and the results of testing the developed sensor.

Computer Education for Teachers in Secondary Schools; Aims and Objectives in Teacher Training.

Science.gov (United States)

International Federation for Information Processing, Geneva (Switzerland). Working Group on Secondary School Education.

Society and education are changing rapidly, and since computers are playing a significant role in these changes it is imperative that secondary school teachers become more fully informed about computers. Computers are of interest to learners because they have led to new theoretical developments, such as automata theory, have many practical…

Curioser and Curioser: New Concepts in the Rapidly Changing Landscape of Educational Administration.

Science.gov (United States)

Fowler, Frances C.

1999-01-01

The new "Handbook" assumes that society is changing rapidly and educational administration must change with it. This article critiques chapters on four concepts: ideology, the new consumerism, social capital, and the new institutionalism. Consumerism is pure 19th-century liberalism/individualism; social capital theory and…

Rapid stress-induced transcriptomic changes in the brain depend on beta-adrenergic signaling.

Science.gov (United States)

Roszkowski, Martin; Manuella, Francesca; von Ziegler, Lukas; Durán-Pacheco, Gonzalo; Moreau, Jean-Luc; Mansuy, Isabelle M; Bohacek, Johannes

2016-08-01

Acute exposure to stressful experiences can rapidly increase anxiety and cause neuropsychiatric disorders. The effects of stress result in part from the release of neurotransmitters and hormones, which regulate gene expression in different brain regions. The fast neuroendocrine response to stress is largely mediated by norepinephrine (NE) and corticotropin releasing hormone (CRH), followed by a slower and more sustained release of corticosterone. While corticosterone is an important regulator of gene expression, it is not clear which stress-signals contribute to the rapid regulation of gene expression observed immediately after stress exposure. Here, we demonstrate in mice that 45 min after an acute swim stress challenge, large changes in gene expression occur across the transcriptome in the hippocampus, a region sensitive to the effects of stress. We identify multiple candidate genes that are rapidly and transiently altered in both males and females. Using a pharmacological approach, we show that most of these rapidly induced genes are regulated by NE through β-adrenergic receptor signaling. We find that CRH and corticosterone can also contribute to rapid changes in gene expression, although these effects appear to be restricted to fewer genes. These results newly reveal a widespread impact of NE on the transcriptome and identify novel genes associated with stress and adrenergic signaling. Copyright © 2016 Elsevier Ltd. All rights reserved.

A Brief Analysis of Development Situations and Trend of Cloud Computing

Science.gov (United States)

Yang, Wenyan

2017-12-01

in recent years, the rapid development of Internet technology has radically changed people's work, learning and lifestyles. More and more activities are completed by virtue of computers and networks. The amount of information and data generated is bigger day by day, and people rely more on computer, which makes computing power of computer fail to meet demands of accuracy and rapidity from people. The cloud computing technology has experienced fast development, which is widely applied in the computer industry as a result of advantages of high precision, fast computing and easy usage. Moreover, it has become a focus in information research at present. In this paper, the development situations and trend of cloud computing shall be analyzed and researched.

Managing health care organizations in an age of rapid change.

Science.gov (United States)

Benjamin, S; al-Alaiwat, S

1998-03-01

Health care managers find their work increasingly difficult, due in part to rapid environmental change that plagues organizational life. Management practices and attitudes that may have been appropriate in previous eras are ineffective today. A study was conducted among managers in the Ministry of Health, State of Bahrain, seeking information about current trends in the macro or external environment that affect the Ministry of Health, as well as internal environmental pressures that may be similar or different. This article provides a clear picture of the context in which managers perform their work and offers recommendations for coping with change in dynamic, complex organizations.

Effects of high latitude protected areas on bird communities under rapid climate change.

Science.gov (United States)

Santangeli, Andrea; Rajasärkkä, Ari; Lehikoinen, Aleksi

2017-06-01

Anthropogenic climate change is rapidly becoming one of the main threats to biodiversity, along with other threats triggered by human-driven land-use change. Species are already responding to climate change by shifting their distributions polewards. This shift may create a spatial mismatch between dynamic species distributions and static protected areas (PAs). As protected areas represent one of the main pillars for preserving biodiversity today and in the future, it is important to assess their contribution in sheltering the biodiversity communities, they were designated to protect. A recent development to investigate climate-driven impacts on biological communities is represented by the community temperature index (CTI). CTI provides a measure of the relative temperature average of a community in a specific assemblage. CTI value will be higher for assemblages dominated by warm species compared with those dominated by cold-dwelling species. We here model changes in the CTI of Finnish bird assemblages, as well as changes in species densities, within and outside of PAs during the past four decades in a large boreal landscape under rapid change. We show that CTI has markedly increased over time across Finland, with this change being similar within and outside PAs and five to seven times slower than the temperature increase. Moreover, CTI has been constantly lower within than outside of PAs, and PAs still support communities, which show colder thermal index than those outside of PAs in the 1970s and 1980s. This result can be explained by the higher relative density of northern species within PAs than outside. Overall, our results provide some, albeit inconclusive, evidence that PAs may play a role in supporting the community of northern species. Results also suggest that communities are, however, shifting rapidly, both inside and outside of PAs, highlighting the need for adjusting conservation measures before it is too late. © 2016 John Wiley & Sons Ltd.

Cloud Computing for Teaching Practice: A New Design?

Science.gov (United States)

Saadatdoost, Robab; Sim, Alex Tze Hiang; Jafarkarimi, Hosein; Hee, Jee Mei; Saadatdoost, Leila

2014-01-01

Recently researchers have shown an increased interest in cloud computing technology. It is becoming increasingly difficult to ignore cloud computing technology in education context. However rapid changes in information technology are having a serious effect on teaching framework designs. So far, however, there has been little discussion about…

Rapid climate change did not cause population collapse at the end of the European Bronze Age.

Science.gov (United States)

Armit, Ian; Swindles, Graeme T; Becker, Katharina; Plunkett, Gill; Blaauw, Maarten

2014-12-02

The impact of rapid climate change on contemporary human populations is of global concern. To contextualize our understanding of human responses to rapid climate change it is necessary to examine the archeological record during past climate transitions. One episode of abrupt climate change has been correlated with societal collapse at the end of the northwestern European Bronze Age. We apply new methods to interrogate archeological and paleoclimate data for this transition in Ireland at a higher level of precision than has previously been possible. We analyze archeological (14)C dates to demonstrate dramatic population collapse and present high-precision proxy climate data, analyzed through Bayesian methods, to provide evidence for a rapid climatic transition at ca. 750 calibrated years B.C. Our results demonstrate that this climatic downturn did not initiate population collapse and highlight the nondeterministic nature of human responses to past climate change.

Evaluation of the rapid and slow maxillary expansion using cone-beam computed tomography: a randomized clinical trial

Directory of Open Access Journals (Sweden)

Juliana da S. Pereira

Full Text Available ABSTRACT OBJECTIVE: The aim of this randomized clinical trial was to evaluate the dental, dentoalveolar, and skeletal changes occurring right after the rapid maxillary expansion (RME and slow maxillary expansion (SME treatment using Haas-type expander. METHODS: All subjects performed cone-beam computed tomography (CBCT before installation of expanders (T1 and right after screw stabilization (T2. Patients who did not follow the research parameters were excluded. The final sample resulted in 21 patients in RME group (mean age of 8.43 years and 16 patients in SME group (mean age of 8.70 years. Based on the skewness and kurtosis statistics, the variables were judged to be normally distributed and paired t-test and student t-test were performed at significance level of 5%. RESULTS: Intermolar angle changed significantly due to treatment and RME showed greater buccal tipping than SME. RME showed significant changes in other four measurements due to treatment: maxilla moved forward and mandible showed backward rotation and, at transversal level both skeletal and dentoalveolar showed significant changes due to maxillary expansion. SME showed significant dentoalveolar changes due to maxillary expansion. CONCLUSIONS: Only intermolar angle showed significant difference between the two modalities of maxillary expansion with greater buccal tipping for RME. Also, RME produced skeletal maxillary expansion and SME did not. Both maxillary expansion modalities were efficient to promote transversal gain at dentoalveolar level. Sagittal and vertical measurements did not show differences between groups, but RME promoted a forward movement of the maxilla and backward rotation of the mandible.

Radiographic and computed tomographic demonstration of pseudotumor cerebri due to rapid weight gain in a child with pelvic rhabdomyosarcoma

Energy Technology Data Exchange (ETDEWEB)

Berdon, W.E.; Barker, D.H.; Barash, F.S.

1982-06-01

Rapid weight gain in a malnourished child can be associated with suture diastasis in the pattern of pseudotumor cerebri; this has been previously reported in deprivational dwarfism and cystic fibrosis. In a child with pelvic rhabdomyosarcoma, skull radiographs and cranial computed tomographic (CT) scans were available prior to a period of rapid weight gain induced by hyperalimentation. Suture diastasis developed and repeat CT scans showed this to be accompanied by smaller ventricles.

Radiographic and computed tomographic demonstration of pseudotumor cerebri due to rapid weight gain in a child with pelvic rhabdomyosarcoma

International Nuclear Information System (INIS)

Berdon, W.E.; Barker, D.H.; Barash, F.S.

1982-01-01

Rapid weight gain in a malnourished child can be associated with suture diastasis in the pattern of pseudotumor cerebri; this has been previously reported in deprivational dwarfism and cystic fibrosis. In a child with pelvic rhabdomyosarcoma, skull radiographs and cranial computed tomographic (CT) scans were available prior to a period of rapid weight gain induced by hyperalimentation. Suture diastasis developed and repeat CT scans showed this to be accompanied by smaller ventricles

Climate engineering and the risk of rapid climate change

International Nuclear Information System (INIS)

Ross, Andrew; Damon Matthews, H

2009-01-01

Recent research has highlighted risks associated with the use of climate engineering as a method of stabilizing global temperatures, including the possibility of rapid climate warming in the case of abrupt removal of engineered radiative forcing. In this study, we have used a simple climate model to estimate the likely range of temperature changes associated with implementation and removal of climate engineering. In the absence of climate engineering, maximum annual rates of warming ranged from 0.015 to 0.07 deg. C/year, depending on the model's climate sensitivity. Climate engineering resulted in much higher rates of warming, with the temperature change in the year following the removal of climate engineering ranging from 0.13 to 0.76 deg. C. High rates of temperature change were sustained for two decades following the removal of climate engineering; rates of change of 0.5 (0.3,0.1) deg. C/decade were exceeded over a 20 year period with 15% (75%, 100%) likelihood. Many ecosystems could be negatively affected by these rates of temperature change; our results suggest that climate engineering in the absence of deep emissions cuts could arguably constitute increased risk of dangerous anthropogenic interference in the climate system under the criteria laid out in the United Nations Framework Convention on Climate Change.

A fibre optic oxygen sensor that detects rapid PO2 changes under simulated conditions of cyclical atelectasis in vitro.

Science.gov (United States)

Formenti, Federico; Chen, Rongsheng; McPeak, Hanne; Matejovic, Martin; Farmery, Andrew D; Hahn, Clive E W

2014-01-15

Two challenges in the management of Acute Respiratory Distress Syndrome are the difficulty in diagnosing cyclical atelectasis, and in individualising mechanical ventilation therapy in real-time. Commercial optical oxygen sensors can detect [Formula: see text] oscillations associated with cyclical atelectasis, but are not accurate at saturation levels below 90%, and contain a toxic fluorophore. We present a computer-controlled test rig, together with an in-house constructed ultra-rapid sensor to test the limitations of these sensors when exposed to rapidly changing [Formula: see text] in blood in vitro. We tested the sensors' responses to simulated respiratory rates between 10 and 60 breaths per minute. Our sensor was able to detect the whole amplitude of the imposed [Formula: see text] oscillations, even at the highest respiratory rate. We also examined our sensor's resistance to clot formation by continuous in vivo deployment in non-heparinised flowing animal blood for 24h, after which no adsorption of organic material on the sensor's surface was detectable by scanning electron microscopy. Copyright © 2013 The Authors. Published by Elsevier B.V. All rights reserved.

Addressing unmet need for HIV testing in emergency care settings: a role for computer-facilitated rapid HIV testing?

Science.gov (United States)

Kurth, Ann E; Severynen, Anneleen; Spielberg, Freya

2013-08-01

HIV testing in emergency departments (EDs) remains underutilized. The authors evaluated a computer tool to facilitate rapid HIV testing in an urban ED. Randomly assigned nonacute adult ED patients were randomly assigned to a computer tool (CARE) and rapid HIV testing before a standard visit (n = 258) or to a standard visit (n = 259) with chart access. The authors assessed intervention acceptability and compared noted HIV risks. Participants were 56% nonWhite and 58% male; median age was 37 years. In the CARE arm, nearly all (251/258) of the patients completed the session and received HIV results; four declined to consent to the test. HIV risks were reported by 54% of users; one participant was confirmed HIV-positive, and two were confirmed false-positive (seroprevalence 0.4%, 95% CI [0.01, 2.2]). Half (55%) of the patients preferred computerized rather than face-to-face counseling for future HIV testing. In the standard arm, one HIV test and two referrals for testing occurred. Computer-facilitated HIV testing appears acceptable to ED patients. Future research should assess cost-effectiveness compared with staff-delivered approaches.

Adaptively detecting changes in Autonomic Grid Computing

KAUST Repository

Zhang, Xiangliang; Germain, Cé cile; Sebag, Michè le

2010-01-01

Detecting the changes is the common issue in many application fields due to the non-stationary distribution of the applicative data, e.g., sensor network signals, web logs and gridrunning logs. Toward Autonomic Grid Computing, adaptively detecting

Accuracy of using computer-aided rapid prototyping templates for mandible reconstruction with an iliac crest graft

Science.gov (United States)

2014-01-01

Background This study aimed to evaluate the accuracy of surgical outcomes in free iliac crest mandibular reconstructions that were carried out with virtual surgical plans and rapid prototyping templates. Methods This study evaluated eight patients who underwent mandibular osteotomy and reconstruction with free iliac crest grafts using virtual surgical planning and designed guiding templates. Operations were performed using the prefabricated guiding templates. Postoperative three-dimensional computer models were overlaid and compared with the preoperatively designed models in the same coordinate system. Results Compared to the virtual osteotomy, the mean error of distance of the actual mandibular osteotomy was 2.06 ± 0.86 mm. When compared to the virtual harvested grafts, the mean error volume of the actual harvested grafts was 1412.22 ± 439.24 mm3 (9.12% ± 2.84%). The mean error between the volume of the actual harvested grafts and the shaped grafts was 2094.35 ± 929.12 mm3 (12.40% ± 5.50%). Conclusions The use of computer-aided rapid prototyping templates for virtual surgical planning appears to positively influence the accuracy of mandibular reconstruction. PMID:24957053

A bioinspired color-changing polystyrene microarray as a rapid qualitative sensor for methanol and ethanol

International Nuclear Information System (INIS)

Kuo, Wen-Kai; Weng, Hsueh-Ping; Hsu, Jyun-Jheng; Yu, Hsin Her

2016-01-01

Polystyrene (PS) microspheres were synthesized by emulsifier-free emulsion polymerization and arranged in an array of closely packed, opal-like photonic crystals by slow self-assembly through dip-coating. This periodic array of PS microspheres was then employed as a rapid qualitative sensor for methanol and ethanol. Both solvents could be detected rapidly based on the routes of their reflection coordinates in the chromaticity diagram or directly by the naked eye on the basis of the change in color within 1 min once a solvent sample had been placed on the PS photochromic sensor. This opal-like PS sensor can thus not only be employed as a rapid sensor for methanol and ethanol but can also be used as a powerful tool for the fast screening of illicit drugs and toxic chemicals during forensic investigations. - Highlights: • Opal-like array of polystyrene (PS) microspheres is synthesized by self-assembly. • This periodic PS array is used as a rapid sensor for methanol and ethanol. • Solvents are detected by routes of reflection coordinates in chromaticity diagram. • They are also detected directly by naked eye based on change in color of sensor. • The color change is irreversible for methanol but reversible for ethanol.

A bioinspired color-changing polystyrene microarray as a rapid qualitative sensor for methanol and ethanol

Energy Technology Data Exchange (ETDEWEB)

Kuo, Wen-Kai, E-mail: wkkuo@nfu.edu.tw [Graduate Institute of Electro-Optical and Materials Science, National Formosa University, 64 Wenhua Road, Huwei, Yunlin 63208, Taiwan (China); Weng, Hsueh-Ping, E-mail: sherry.weng7949@gmail.com [Graduate Institute of Electro-Optical and Materials Science, National Formosa University, 64 Wenhua Road, Huwei, Yunlin 63208, Taiwan (China); Hsu, Jyun-Jheng, E-mail: k88520x@gmail.com [Graduate Institute of Electro-Optical and Materials Science, National Formosa University, 64 Wenhua Road, Huwei, Yunlin 63208, Taiwan (China); Yu, Hsin Her, E-mail: hhyu@nfu.edu.tw [Department of Biotechnology, National Formosa University, 64 Wenhua Road, Huwei, Yunlin 63208, Taiwan (China)

2016-04-15

Polystyrene (PS) microspheres were synthesized by emulsifier-free emulsion polymerization and arranged in an array of closely packed, opal-like photonic crystals by slow self-assembly through dip-coating. This periodic array of PS microspheres was then employed as a rapid qualitative sensor for methanol and ethanol. Both solvents could be detected rapidly based on the routes of their reflection coordinates in the chromaticity diagram or directly by the naked eye on the basis of the change in color within 1 min once a solvent sample had been placed on the PS photochromic sensor. This opal-like PS sensor can thus not only be employed as a rapid sensor for methanol and ethanol but can also be used as a powerful tool for the fast screening of illicit drugs and toxic chemicals during forensic investigations. - Highlights: • Opal-like array of polystyrene (PS) microspheres is synthesized by self-assembly. • This periodic PS array is used as a rapid sensor for methanol and ethanol. • Solvents are detected by routes of reflection coordinates in chromaticity diagram. • They are also detected directly by naked eye based on change in color of sensor. • The color change is irreversible for methanol but reversible for ethanol.

Use of the computational-informational web-GIS system for the development of climatology students' skills in modeling and understanding climate change

Science.gov (United States)

Gordova, Yulia; Martynova, Yulia; Shulgina, Tamara

2015-04-01

The current situation with the training of specialists in environmental sciences is complicated by the fact that the very scientific field is experiencing a period of rapid development. Global change has caused the development of measurement techniques and modeling of environmental characteristics, accompanied by the expansion of the conceptual and mathematical apparatus. Understanding and forecasting processes in the Earth system requires extensive use of mathematical modeling and advanced computing technologies. As a rule, available training programs in the environmental sciences disciplines do not have time to adapt to such rapid changes in the domain content. As a result, graduates of faculties do not understand processes and mechanisms of the global change, have only superficial knowledge of mathematical modeling of processes in the environment. They do not have the required skills in numerical modeling, data processing and analysis of observations and computation outputs and are not prepared to work with the meteorological data. For adequate training of future specialists in environmental sciences we propose the following approach, which reflects the new "research" paradigm in education. We believe that the training of such specialists should be done not in an artificial learning environment, but based on actual operating information-computational systems used in environment studies, in the so-called virtual research environment via development of virtual research and learning laboratories. In the report the results of the use of computational-informational web-GIS system "Climate" (http://climate.scert.ru/) as a prototype of such laboratory are discussed. The approach is realized at Tomsk State University to prepare bachelors in meteorology. Student survey shows that their knowledge has become deeper and more systemic after undergoing training in virtual learning laboratory. The scientific team plans to assist any educators to utilize the system in earth

Integrated mechanisms of anticipation and rate-of-change computations in cortical circuits.

Directory of Open Access Journals (Sweden)

Gabriel D Puccini

2007-05-01

Full Text Available Local neocortical circuits are characterized by stereotypical physiological and structural features that subserve generic computational operations. These basic computations of the cortical microcircuit emerge through the interplay of neuronal connectivity, cellular intrinsic properties, and synaptic plasticity dynamics. How these interacting mechanisms generate specific computational operations in the cortical circuit remains largely unknown. Here, we identify the neurophysiological basis of both the rate of change and anticipation computations on synaptic inputs in a cortical circuit. Through biophysically realistic computer simulations and neuronal recordings, we show that the rate-of-change computation is operated robustly in cortical networks through the combination of two ubiquitous brain mechanisms: short-term synaptic depression and spike-frequency adaptation. We then show how this rate-of-change circuit can be embedded in a convergently connected network to anticipate temporally incoming synaptic inputs, in quantitative agreement with experimental findings on anticipatory responses to moving stimuli in the primary visual cortex. Given the robustness of the mechanism and the widespread nature of the physiological machinery involved, we suggest that rate-of-change computation and temporal anticipation are principal, hard-wired functions of neural information processing in the cortical microcircuit.

Integrating Remote Sensing Data, Hybrid-Cloud Computing, and Event Notifications for Advanced Rapid Imaging & Analysis (Invited)

Science.gov (United States)

Hua, H.; Owen, S. E.; Yun, S.; Lundgren, P.; Fielding, E. J.; Agram, P.; Manipon, G.; Stough, T. M.; Simons, M.; Rosen, P. A.; Wilson, B. D.; Poland, M. P.; Cervelli, P. F.; Cruz, J.

2013-12-01

Space-based geodetic measurement techniques such as Interferometric Synthetic Aperture Radar (InSAR) and Continuous Global Positioning System (CGPS) are now important elements in our toolset for monitoring earthquake-generating faults, volcanic eruptions, hurricane damage, landslides, reservoir subsidence, and other natural and man-made hazards. Geodetic imaging's unique ability to capture surface deformation with high spatial and temporal resolution has revolutionized both earthquake science and volcanology. Continuous monitoring of surface deformation and surface change before, during, and after natural hazards improves decision-making from better forecasts, increased situational awareness, and more informed recovery. However, analyses of InSAR and GPS data sets are currently handcrafted following events and are not generated rapidly and reliably enough for use in operational response to natural disasters. Additionally, the sheer data volumes needed to handle a continuous stream of InSAR data sets also presents a bottleneck. It has been estimated that continuous processing of InSAR coverage of California alone over 3-years would reach PB-scale data volumes. Our Advanced Rapid Imaging and Analysis for Monitoring Hazards (ARIA-MH) science data system enables both science and decision-making communities to monitor areas of interest with derived geodetic data products via seamless data preparation, processing, discovery, and access. We will present our findings on the use of hybrid-cloud computing to improve the timely processing and delivery of geodetic data products, integrating event notifications from USGS to improve the timely processing for response, as well as providing browse results for quick looks with other tools for integrative analysis.

Dynamic Computation of Change Operations in Version Management of Business Process Models

Science.gov (United States)

Küster, Jochen Malte; Gerth, Christian; Engels, Gregor

Version management of business process models requires that changes can be resolved by applying change operations. In order to give a user maximal freedom concerning the application order of change operations, position parameters of change operations must be computed dynamically during change resolution. In such an approach, change operations with computed position parameters must be applicable on the model and dependencies and conflicts of change operations must be taken into account because otherwise invalid models can be constructed. In this paper, we study the concept of partially specified change operations where parameters are computed dynamically. We provide a formalization for partially specified change operations using graph transformation and provide a concept for their applicability. Based on this, we study potential dependencies and conflicts of change operations and show how these can be taken into account within change resolution. Using our approach, a user can resolve changes of business process models without being unnecessarily restricted to a certain order.

Rapid treatment-induced brain changes in pediatric CRPS.

Science.gov (United States)

Erpelding, Nathalie; Simons, Laura; Lebel, Alyssa; Serrano, Paul; Pielech, Melissa; Prabhu, Sanjay; Becerra, Lino; Borsook, David

2016-03-01

To date, brain structure and function changes in children with complex regional pain syndrome (CRPS) as a result of disease and treatment remain unknown. Here, we investigated (a) gray matter (GM) differences between patients with CRPS and healthy controls and (b) GM and functional connectivity (FC) changes in patients following intensive interdisciplinary psychophysical pain treatment. Twenty-three patients (13 females, 9 males; average age ± SD = 13.3 ± 2.5 years) and 21 healthy sex- and age-matched controls underwent magnetic resonance imaging. Compared to controls, patients had reduced GM in the primary motor cortex, premotor cortex, supplementary motor area, midcingulate cortex, orbitofrontal cortex, dorsolateral prefrontal cortex (dlPFC), posterior cingulate cortex, precuneus, basal ganglia, thalamus, and hippocampus. Following treatment, patients had increased GM in the dlPFC, thalamus, basal ganglia, amygdala, and hippocampus, and enhanced FC between the dlPFC and the periaqueductal gray, two regions involved in descending pain modulation. Accordingly, our results provide novel evidence for GM abnormalities in sensory, motor, emotional, cognitive, and pain modulatory regions in children with CRPS. Furthermore, this is the first study to demonstrate rapid treatment-induced GM and FC changes in areas implicated in sensation, emotion, cognition, and pain modulation.

Computer vision uncovers predictors of physical urban change.

Science.gov (United States)

Naik, Nikhil; Kominers, Scott Duke; Raskar, Ramesh; Glaeser, Edward L; Hidalgo, César A

2017-07-18

Which neighborhoods experience physical improvements? In this paper, we introduce a computer vision method to measure changes in the physical appearances of neighborhoods from time-series street-level imagery. We connect changes in the physical appearance of five US cities with economic and demographic data and find three factors that predict neighborhood improvement. First, neighborhoods that are densely populated by college-educated adults are more likely to experience physical improvements-an observation that is compatible with the economic literature linking human capital and local success. Second, neighborhoods with better initial appearances experience, on average, larger positive improvements-an observation that is consistent with "tipping" theories of urban change. Third, neighborhood improvement correlates positively with physical proximity to the central business district and to other physically attractive neighborhoods-an observation that is consistent with the "invasion" theories of urban sociology. Together, our results provide support for three classical theories of urban change and illustrate the value of using computer vision methods and street-level imagery to understand the physical dynamics of cities.

Computational System For Rapid CFD Analysis In Engineering

Science.gov (United States)

Barson, Steven L.; Ascoli, Edward P.; Decroix, Michelle E.; Sindir, Munir M.

1995-01-01

Computational system comprising modular hardware and software sub-systems developed to accelerate and facilitate use of techniques of computational fluid dynamics (CFD) in engineering environment. Addresses integration of all aspects of CFD analysis process, including definition of hardware surfaces, generation of computational grids, CFD flow solution, and postprocessing. Incorporates interfaces for integration of all hardware and software tools needed to perform complete CFD analysis. Includes tools for efficient definition of flow geometry, generation of computational grids, computation of flows on grids, and postprocessing of flow data. System accepts geometric input from any of three basic sources: computer-aided design (CAD), computer-aided engineering (CAE), or definition by user.

Quantitative evaluation of the disintegration of orally rapid disintegrating tablets by X-ray computed tomography.

Science.gov (United States)

Otsuka, Makoto; Yamanaka, Azusa; Uchino, Tomohiro; Otsuka, Kuniko; Sadamoto, Kiyomi; Ohshima, Hiroyuki

2012-01-01

To measure the rapid disintegration of Oral Disintegrating Tablets (ODT), a new test (XCT) was developed using X-ray computing tomography (X-ray CT). Placebo ODT, rapid disintegration candy (RDC) and Gaster®-D-Tablets (GAS) were used as model samples. All these ODTs were used to measure oral disintegration time (DT) in distilled water at 37±2°C by XCT. DTs were affected by the width of mesh screens, and degree to which the tablet holder vibrated from air bubbles. An in-vivo tablet disintegration test was performed for RDC using 11 volunteers. DT by the in-vivo method was significantly longer than that using the conventional tester. The experimental conditions for XCT such as the width of the mesh screen and degree of vibration were adjusted to be consistent with human DT values. Since DTs by the XCT method were almost the same as the human data, this method was able to quantitatively evaluate the rapid disintegration of ODT under the same conditions as inside the oral cavity. The DTs of four commercially available ODTs were comparatively evaluated by the XCT method, conventional tablet disintegration test and in-vivo method.

How Rapid Change Affects Deltas in the Arctic Region

Science.gov (United States)

Overeem, I.; Bendixen, M.

2017-12-01

Deltas form where the river drains into the ocean. Consequently, delta depositional processes are impacted by either changes in the respective river drainage basin or by changes in the regional marine environment. In a warming Arctic region rapid change has occurred over the last few decades in both the terrestrial domain as well as in the marine domain. Important terrestrial controls include 1) change in permafrost possibly destabilizing river banks, 2) strong seasonality of river discharge due to a short melting season, 3) high sediment supply if basins are extensively glaciated, 4) lake outbursts and ice jams favoring river flooding. Whereas in the Arctic marine domain sea ice loss promotes wave and storm surge impact, and increased longshore transport. We here ask which of these factors dominate any morphological change in Arctic deltas. First, we analyze hydrological data to assess change in Arctic-wide river discharge characteristics and timing, and sea ice concentration data to map changes in sea ice regime. Based on this observational analysis we set up a number of scenarios of change. We then model hypothetical small-scale delta formation considering change in these primary controls by setting up a numerical delta model, and combining it dynamically with a permafrost model. We find that for typical Greenlandic deltas changes in river forcing due to ice sheet melt dominate the morphological change, which is corroborated by mapping of delta progradation from aerial photos and satellite imagery. Whereas in other areas, along the North Slope and the Canadian Arctic small deltas are more stable or experienced retreat. Our preliminary coupled model allows us to further disentangle the impact of major forcing factors on delta evolution in high-latitude systems.

26 CFR 1.806-4 - Change of basis in computing reserves.

Science.gov (United States)

2010-04-01

.... For the taxable year 1959, S elects to revalue such reserves on a net level premium basis under... 26 Internal Revenue 8 2010-04-01 2010-04-01 false Change of basis in computing reserves. 1.806-4... TAX (CONTINUED) INCOME TAXES Investment Income § 1.806-4 Change of basis in computing reserves. (a) In...

Cosmic rays linked to rapid mid-latitude cloud changes

Directory of Open Access Journals (Sweden)

B. A. Laken

2010-11-01

Full Text Available The effect of the Galactic Cosmic Ray (GCR flux on Earth's climate is highly uncertain. Using a novel sampling approach based around observing periods of significant cloud changes, a statistically robust relationship is identified between short-term GCR flux changes and the most rapid mid-latitude (60°–30° N/S cloud decreases operating over daily timescales; this signal is verified in surface level air temperature (SLAT reanalysis data. A General Circulation Model (GCM experiment is used to test the causal relationship of the observed cloud changes to the detected SLAT anomalies. Results indicate that the anomalous cloud changes were responsible for producing the observed SLAT changes, implying that if there is a causal relationship between significant decreases in the rate of GCR flux (~0.79 GU, where GU denotes a change of 1% of the 11-year solar cycle amplitude in four days and decreases in cloud cover (~1.9 CU, where CU denotes a change of 1% cloud cover in four days, an increase in SLAT (~0.05 KU, where KU denotes a temperature change of 1 K in four days can be expected. The influence of GCRs is clearly distinguishable from changes in solar irradiance and the interplanetary magnetic field. However, the results of the GCM experiment are found to be somewhat limited by the ability of the model to successfully reproduce observed cloud cover. These results provide perhaps the most compelling evidence presented thus far of a GCR-climate relationship. From this analysis we conclude that a GCR-climate relationship is governed by both short-term GCR changes and internal atmospheric precursor conditions.

Engaging Chicago residents in climate change action: Results from Rapid Ethnographic Inquiry

Science.gov (United States)

Lynne M. Westphal; Jennifer. Hirsch

2010-01-01

Addressing climate change requires action at all levels of society, from neighborhood to international levels. Using Rapid Ethnography rooted in Asset Based Community Development theory, we investigated climate-friendly attitudes and behaviors in two Chicago neighborhoods in order to assist the City with implementation of its Climate Action Plan. Our research suggests...

Tracking and unpacking rapid Arctic change: Indicators of community health and sustainability in northern Alaska and links to cryospheric change

Science.gov (United States)

Eicken, H.; Sam, J. M.; Mueller-stoffels, M.; Lovecraft, A. L.; Fresco, N. L.

2017-12-01

Tracking and responding to rapid Arctic change benefits from time series of indicator variables that describe the state of the system and can inform anticipatory action. A key challenge is to identify and monitor sets of indicators that capture relevant variability, trends, and transitions in social-environmental systems. We present findings from participatory scenarios focused on community health and sustainability in northern Alaska. In a series of workshops in 2015 and 2016 (Kotzebue workshop photo shown below), over 50 experts, mostly local, identified determinants of community health and sustainability by 2040 in the Northwest Arctic and North Slope Boroughs, Alaska. Drawing on further research, an initial set of factors and uncertainties was refined and prioritized into a total of 20 key drivers, ranging from governance issues to socio-economic and environmental factors. The research team then developed sets of future projections that describe plausible outcomes by mid-century for each of these drivers. A plausibility and consistency analysis of all pairwise combinations of these projections (following Mueller-Stoffels and Eicken, In: North by 2020 - Perspectives on Alaska's Changing Social-Ecological Systems, University of Alaska Press, 2011) resulted in the identification of robust scenarios. The latter were further reviewed by workshop participants, and a set of indicator variables, including indicators of relevant cryospheric change, was identified to help track trajectories towards plausible future states. Publically accessible recorded data only exist for a subset of the more than 70 indicators, reaching back a few years to several decades. For several indicators, the sampling rate or time series length are insufficient for tracking of and response to change. A core set of variables has been identified that meets indicator requirements and can serve as a tool for Alaska Arctic communities in adapting to or mitigating rapid change affecting community

Rapid Reconstitution Packages (RRPs) implemented by integration of computational fluid dynamics (CFD) and 3D printed microfluidics.

Science.gov (United States)

Chi, Albert; Curi, Sebastian; Clayton, Kevin; Luciano, David; Klauber, Kameron; Alexander-Katz, Alfredo; D'hers, Sebastian; Elman, Noel M

2014-08-01

Rapid Reconstitution Packages (RRPs) are portable platforms that integrate microfluidics for rapid reconstitution of lyophilized drugs. Rapid reconstitution of lyophilized drugs using standard vials and syringes is an error-prone process. RRPs were designed using computational fluid dynamics (CFD) techniques to optimize fluidic structures for rapid mixing and integrating physical properties of targeted drugs and diluents. Devices were manufactured using stereo lithography 3D printing for micrometer structural precision and rapid prototyping. Tissue plasminogen activator (tPA) was selected as the initial model drug to test the RRPs as it is unstable in solution. tPA is a thrombolytic drug, stored in lyophilized form, required in emergency settings for which rapid reconstitution is of critical importance. RRP performance and drug stability were evaluated by high-performance liquid chromatography (HPLC) to characterize release kinetics. In addition, enzyme-linked immunosorbent assays (ELISAs) were performed to test for drug activity after the RRPs were exposed to various controlled temperature conditions. Experimental results showed that RRPs provided effective reconstitution of tPA that strongly correlated with CFD results. Simulation and experimental results show that release kinetics can be adjusted by tuning the device structural dimensions and diluent drug physical parameters. The design of RRPs can be tailored for a number of applications by taking into account physical parameters of the active pharmaceutical ingredients (APIs), excipients, and diluents. RRPs are portable platforms that can be utilized for reconstitution of emergency drugs in time-critical therapies.

Environmental impacts of rapid water level changes; Miljoekonsekvenser av raske vannstandsendringer

Energy Technology Data Exchange (ETDEWEB)

Arnekleiv, Jo Vegar; Bakken, Tor Haakon; Bogen, Jim; Boensnes, Truls Erik; Elster, Margrethe; Harby, Atle; Kutznetsova, Yulia; Saltveit, Svein Jakob; Sauterleute, Julian; Stickler, Morten; Sundt, Haakon; Tjomsland, Torulv; Ugedal, Ola

2012-07-01

This report summarizes the state of knowledge of the environmental impacts of power driving and rapid water level changes and describes possible mitigation measures. The report assesses the environmental effects of possible increased power installation in Mauranger and Tonstad power plants, based on existing data and knowledge. At Straumsmo plants in Barduelva there are collected some physical data and the environmental impact of existing power driving is considered. (eb)

Mobile work: Ergonomics in a rapidly changing work environment.

Science.gov (United States)

Honan, Meg

2015-01-01

Places of work have been completely transformed by innovations in mobile work tools and ever-present access to internet data. This article characterizes use patterns and provides preliminary considerations for productive and comfortable use of common mobile devices. Two surveys described trends in mobile work. In the first, ergonomics professionals who oversee programs reported common mobile devices, their users and what data is accessed. The second, an end user survey, explored common activities performed on mobile devices, duration of use and locations where mobile work is common. The survey results provide a baseline data point for the status of mobile work in early 2014. Research indicates that additional risks have been introduced to the neck, thumbs and hands when using mobile devices. Possible trends regarding device use and work locations emerge. Intervention studies provide some direction for the practitioner. Practical strategies are outlined to reduce exposure intensity and duration. Contemporary mobile work presents tremendous change and opportunity for ergonomists and researchers to keep pace with fitting the changing models of work to the person. Continued research is needed on current mobile device use patterns to better understand ergonomic risk exposure in this rapidly changing realm.

Rapid changes in protein phosphorylation associated with gravity perception in corn roots

International Nuclear Information System (INIS)

McFadden, J.J.; Poovaiah, B.W.

1987-01-01

A previous paper from this laboratory showed calcium- and calmodulin-dependent in vivo protein phosphorylation in corn root tips. The authors show that rapid changes in calcium-dependent protein phosphorylation are involved in light-dependent graviperception in corn root tips. Corn seedlings (Zea mays L, cv Merit) were grown in the dark for 3 d, then apical root segments were harvested in dim green light to measure in vivo protein phosphorylation. Segments were incubated with 0.5 mCi 32 P for 1 h, then immediately frozen in liquid N 2 or first treated with either 7 min light, or 7 min light plus 1 mM EGTA and 10 μM A23187. Labeled proteins were separated by 2D gel electrophoresis and detected by autoradiography. Light caused rapid and specific promotion of phosphorylation of 5 polypeptides. The increases in protein phosphorylation were reversed by treating with EGTA and A23187. The authors postulate that these changes in protein phosphorylation are an essential part of the light-dependent gravity response in Merit roots

Adaptively detecting changes in Autonomic Grid Computing

KAUST Repository

Zhang, Xiangliang

2010-10-01

Detecting the changes is the common issue in many application fields due to the non-stationary distribution of the applicative data, e.g., sensor network signals, web logs and gridrunning logs. Toward Autonomic Grid Computing, adaptively detecting the changes in a grid system can help to alarm the anomalies, clean the noises, and report the new patterns. In this paper, we proposed an approach of self-adaptive change detection based on the Page-Hinkley statistic test. It handles the non-stationary distribution without the assumption of data distribution and the empirical setting of parameters. We validate the approach on the EGEE streaming jobs, and report its better performance on achieving higher accuracy comparing to the other change detection methods. Meanwhile this change detection process could help to discover the device fault which was not claimed in the system logs. © 2010 IEEE.

Computer Problem-Solving Coaches for Introductory Physics: Design and Usability Studies

Science.gov (United States)

Ryan, Qing X.; Frodermann, Evan; Heller, Kenneth; Hsu, Leonardo; Mason, Andrew

2016-01-01

The combination of modern computing power, the interactivity of web applications, and the flexibility of object-oriented programming may finally be sufficient to create computer coaches that can help students develop metacognitive problem-solving skills, an important competence in our rapidly changing technological society. However, no matter how…

Rapid Prototyping and its Application in Dentistry

Directory of Open Access Journals (Sweden)

V. N. V. Madhav

2013-01-01

Full Text Available Medical implants and biological models have three main characteristics: low volume, complex shape, and can be customized. These characteristics suit very well with Rapid Prototyping (RP and Rapid Manufacturing (RM processes. RP/RM processes are fabricated part layer- by-layer until complete shape finished from 3D model. Biocompatible materials, such as Titanium and Titanium alloy, Zirconium, Cobalt Chromium, PEEK, etc, are used for fabrication process. Reverse Engineering (RE technology greatly affects RP/RM processes. RE is used to capture or scan image of the limb, cranium, tooth, and other biological objects. Three common methods to get the image are 3D laser scanning, Computer Tomography (CT, and Magnetic Resonance Imaging (MRI. Main RP/RM techniques used in Dentistry are Stereotype Lithography Apparatus (SLA, Fused Deposition Modeling (FDM, Selective Laser Sintering (SLS, and ink jet printing. This article reviews the changing scenario of technology in dentistry with special emphasis on Rapid Prototyping and its various applications in Dentistry.

Accuracy of detecting stenotic changes on coronary cineangiograms using computer image processing

International Nuclear Information System (INIS)

Sugahara, Tetsuo; Kimura, Koji; Maeda, Hirofumi.

1990-01-01

To accurately interprets stenotic changes on coronary cineangiograms, an automatic method of detecting stenotic lesion using computer image processing was developed. First, tracing of artery was performed. The vessel edges were then determined by unilateral Gaussian fitting. The stenotic change was detected on the basis of the reference diameter estimated by Hough transformation. This method was evaluated in 132 segments of 27 arteries in 18 patients. Three observers carried out visual interpretation and computer-aided interpretation. The rate of detection by visual interpretation was 6.1, 28.8 and 20.5%, and by computer-aided interpretation, 39.4, 39.4 and 45.5%. With computer-aided interpretation, the agreement between any two observers on lesions and non-lesions was 40.2% and 59.8%, respectively. Therefore, visual interpretation tended to underestimate the stenotic changes on coronary cineangiograms. We think that computer-aided interpretation increase the reliability of diagnosis on coronary cineangiograms. (author)

Monitoring changes in seismic velocity related to an ongoing rapid inflation event at Okmok volcano, Alaska

Science.gov (United States)

Bennington, Ninfa; Haney, Matt; De Angelis, Silvio; Thurber, Clifford; Freymueller, Jeff

2015-01-01

Okmok is one of the most active volcanoes in the Aleutian Arc. In an effort to improve our ability to detect precursory activity leading to eruption at Okmok, we monitor a recent, and possibly ongoing, GPS-inferred rapid inflation event at the volcano using ambient noise interferometry (ANI). Applying this method, we identify changes in seismic velocity outside of Okmok’s caldera, which are related to the hydrologic cycle. Within the caldera, we observe decreases in seismic velocity that are associated with the GPS-inferred rapid inflation event. We also determine temporal changes in waveform decorrelation and show a continual increase in decorrelation rate over the time associated with the rapid inflation event. Themagnitude of relative velocity decreases and decorrelation rate increases are comparable to previous studies at Piton de la Fournaise that associate such changes with increased production of volatiles and/ormagmatic intrusion within the magma reservoir and associated opening of fractures and/or fissures. Notably, the largest decrease in relative velocity occurs along the intrastation path passing nearest to the center of the caldera. This observation, along with equal amplitude relative velocity decreases revealed via analysis of intracaldera autocorrelations, suggests that the inflation sourcemay be located approximately within the center of the caldera and represent recharge of shallow magma storage in this location. Importantly, there is a relative absence of seismicity associated with this and previous rapid inflation events at Okmok. Thus, these ANI results are the first seismic evidence of such rapid inflation at the volcano.

Health Behaviour Change Through Computer Games: Characterising Interventions.

Science.gov (United States)

Poultney, Nathan; Maeder, Anthony; Ginige, Jeewani Anupama

2016-01-01

Recently games in the form of video, computer, or mobile apps have been utilised as an effective component of interventions for health behaviour change. This paper provides an overview of related projects reported in peer-review literature in the period 2006 to 2016. Nine highly relevant references were considered for analysis. The findings are presented according to 3 dimensions of characterisation: health intention, behaviour change principle, and health purpose.

Influence of rapid changes in cytosolic pH on oxidative phosphorylation in skeletal muscle: theoretical studies.

Science.gov (United States)

Korzeniewski, Bernard; Zoladz, Jerzy A

2002-07-01

Cytosolic pH in skeletal muscle may vary significantly because of proton production/consumption by creatine kinase and/or proton production by anaerobic glycolysis. A computer model of oxidative phosphorylation in intact skeletal muscle developed previously was used to study the kinetic effect of these variations on the oxidative phosphorylation system. Two kinds of influence were analysed: (i) via the change in pH across the inner mitochondrial membrane and (ii) via the shift in the equilibrium of the creatine kinase-catalysed reaction. Our simulations suggest that cytosolic pH has essentially no impact on the steady-state fluxes and most metabolite concentrations. On the other hand, rapid acidification/alkalization of cytosol causes a transient decrease/increase in the respiration rate. Furthermore, changes in pH seem to affect significantly the kinetic properties of transition between resting state and active state. An increase in pH brought about by proton consumption by creatine kinase at the onset of exercise lengthens the transition time. At intensive exercise levels this pH increase could lead to loss of the stability of the system, if not compensated by glycolytic H+ production. Thus our theoretical results stress the importance of processes/mechanisms that buffer/compensate for changes in cytosolic proton concentration. In particular, we suggest that the second main role of anaerobic glycolysis, apart from additional ATP supply, may be maintaining the stability of the system at intensive exercise.

Wildlife health in a rapidly changing North: focus on avian disease

Science.gov (United States)

Van Hemert, Caroline R.; Pearce, John M.; Handel, Colleen M.

2014-01-01

Climate-related environmental changes have increasingly been linked to emerging infectious diseases in wildlife. The Arctic is facing a major ecological transition that is expected to substantially affect animal and human health. Changes in phenology or environmental conditions that result from climate warming may promote novel species assemblages as host and pathogen ranges expand to previously unoccupied areas. Recent evidence from the Arctic and subarctic suggests an increase in the spread and prevalence of some wildlife diseases, but baseline data necessary to detect and verify such changes are still lacking. Wild birds are undergoing rapid shifts in distribution and have been implicated in the spread of wildlife and zoonotic diseases. Here, we review evidence of current and projected changes in the abundance and distribution of avian diseases and outline strategies for future research. We discuss relevant climatic and environmental factors, emerging host–pathogen contact zones, the relationship between host condition and immune function, and potential wildlife and human health outcomes in northern regions.

Cloud computing: pushing the right managerial buttons

NARCIS (Netherlands)

S. Khanagha (Saeed)

2015-01-01

textabstractDespite the obvious organisational advantages offered by cloud computing, not all firms have adopted and adapted to the rapid changes that this new form of remote data storage represents. Recent research and practice have focused on the issue from the perspective of firms as a whole,

Women in Physics in a Rapidly Changing China

Science.gov (United States)

Wu, Ling-An

2008-03-01

Despite the upheavals of the 20th century, physics managed to survive quite well in China, where the first woman president of the American Physical Society was born and bred. During the 1950s as a result of policies that emphasized science and engineering, declared equal rights and equal pay for men and women, and assigned jobs to college graduates irrespective of sex, the number of women in physics increased rapidly, many of whom made notable achievements. Since China's opening up over the last thirty years tremendous changes have taken place, and women now face new opportunities as well as challenges in all aspects of society. Whereas physics used to be regarded as the most elite of the sciences, new fields such as computer science, biotechnology and business are now competing for the best students. Compared with other countries the statistics are not bad; in schools and many physics departments the ratio of women teachers may be 30% or higher, but the numbers drop drastically with rank. Moreover, in some research institutions the ratio of female physicists is actually declining, due to retirement of the older generation and fewer successors. Compulsory retirement for women at an earlier age than for men is also a new factor. Conversely, in recent years the ratio of female graduate students enrolling in physics has increased, even reaching 40% in some universities. However, the reasons for this do not bode well: men are not performing so well as women in entrance exams, while the latter are facing increasing discrimination in employment so they have to seek higher degree qualifications. With the further development of China's economy there will be abundant demand for qualified personnel including women with a physics background. It is imperative to actively support the upcoming generation of women physicists and not lose them in the leaky pipeline. The Chinese Physical Society has taken certain positive steps, such as the recent establishment of the Xie Xi

Challenges in the twentieth century and beyond: Computer codes and data

International Nuclear Information System (INIS)

Kirk, B.L.

1995-01-01

The second half of the twentieth century has seen major changes in computer architecture. From the early fifties to the early seventies, the word open-quotes computerclose quotes demanded reverence, respect, and even fear. Computers, then, were almost open-quotes untouchable.close quotes Computers have become the mainstream of communication on rapidly expanding communication highways. They have become necessities of life. This report describes computer codes and packaging, as well as compilers and operating systems

Rapid improvement teams.

Science.gov (United States)

Alemi, F; Moore, S; Headrick, L; Neuhauser, D; Hekelman, F; Kizys, N

1998-03-01

Suggestions, most of which are supported by empirical studies, are provided on how total quality management (TQM) teams can be used to bring about faster organizationwide improvements. Ideas are offered on how to identify the right problem, have rapid meetings, plan rapidly, collect data rapidly, and make rapid whole-system changes. Suggestions for identifying the right problem include (1) postpone benchmarking when problems are obvious, (2) define the problem in terms of customer experience so as not to blame employees nor embed a solution in the problem statement, (3) communicate with the rest of the organization from the start, (4) state the problem from different perspectives, and (5) break large problems into smaller units. Suggestions for having rapid meetings include (1) choose a nonparticipating facilitator to expedite meetings, (2) meet with each team member before the team meeting, (3) postpone evaluation of ideas, and (4) rethink conclusions of a meeting before acting on them. Suggestions for rapid planning include reducing time spent on flowcharting by focusing on the future, not the present. Suggestions for rapid data collection include (1) sample patients for surveys, (2) rely on numerical estimates by process owners, and (3) plan for rapid data collection. Suggestions for rapid organizationwide implementation include (1) change membership on cross-functional teams, (2) get outside perspectives, (3) use unfolding storyboards, and (4) go beyond self-interest to motivate lasting change in the organization. Additional empirical investigations of time saved as a consequence of the strategies provided are needed. If organizations solve their problems rapidly, fewer unresolved problems may remain.

Rapid Temperature Changes and the Early Activity on Comet 67P/Churyumov-Gerasimenko

Science.gov (United States)

Alí-Lagoa, V.; Delbo', M.; Libourel, G.

2015-09-01

The so-called “early activity” of comet 67P/Churyumov-Gerasimenko has been observed to originate mostly in parts of the concave region or “neck” between its two lobes. Since activity is driven by the sublimation of volatiles, this is a puzzling result because this area is less exposed to the Sun and is therefore expected to be cooler on average. We used a thermophysical model that takes into account thermal inertia, global self-heating, and shadowing, to compute surface temperatures of the comet. We found that, for every rotation in the 2014 August-December period, some parts of the neck region undergo the fastest temperature variations of the comet’s surface precisely because they are shadowed by their surrounding terrains. Our work suggests that these fast temperature changes are correlated to the early activity of the comet, and we put forward the hypothesis that erosion related to thermal cracking is operating at a high rate on the neck region due to these rapid temperature variations. This may explain why the neck contains some ice—as opposed to most other parts of the surface—and why it is the main source of the comet’s early activity. In a broader context, these results indicate that thermal cracking can operate faster on atmosphereless bodies with significant concavities than implied by currently available estimates.

RAPID SPECTRAL CHANGES OF CYGNUS X-1 IN THE LOW/HARD STATE WITH SUZAKU

Energy Technology Data Exchange (ETDEWEB)

Yamada, S.; Makishima, K. [Cosmic Radiation Laboratory, Institute of Physical and Chemical Research (RIKEN), Wako, Saitama 351-0198 (Japan); Negoro, H. [Department of Physics, College of Science and Technology, Nihon University, 1-8 Kanda-Surugadai, Chiyoda-ku, Tokyo 101-8308 (Japan); Torii, S.; Noda, H. [Department of Physics, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan); Mineshige, S. [Department of Astronomy, Kyoto University, Kitashirakawa Oiwake-cho, Sakyo-ku, Kyoto 606-8502 (Japan)

2013-04-20

Rapid spectral changes in the hard X-ray on a timescale down to {approx}0.1 s are studied by applying a ''shot analysis'' technique to the Suzaku observations of the black hole binary Cygnus X-1, performed on 2008 April 18 during the low/hard state. We successfully obtained the shot profiles, covering 10-200 keV with the Suzaku HXD-PIN and HXD-GSO detector. It is notable that the 100-200 keV shot profile is acquired for the first time owing to the HXD-GSO detector. The intensity changes in a time-symmetric way, though the hardness changes in a time-asymmetric way. When the shot-phase-resolved spectra are quantified with the Compton model, the Compton y-parameter and the electron temperature are found to decrease gradually through the rising phase of the shot, while the optical depth appears to increase. All the parameters return to their time-averaged values immediately within 0.1 s past the shot peak. We have not only confirmed this feature previously found in energies below {approx}60 keV, but also found that the spectral change is more prominent in energies above {approx}100 keV, implying the existence of some instant mechanism for direct entropy production. We discuss possible interpretations of the rapid spectral changes in the hard X-ray band.

Developmental Changes in Learning: Computational Mechanisms and Social Influences

Directory of Open Access Journals (Sweden)

Florian Bolenz

2017-11-01

Full Text Available Our ability to learn from the outcomes of our actions and to adapt our decisions accordingly changes over the course of the human lifespan. In recent years, there has been an increasing interest in using computational models to understand developmental changes in learning and decision-making. Moreover, extensions of these models are currently applied to study socio-emotional influences on learning in different age groups, a topic that is of great relevance for applications in education and health psychology. In this article, we aim to provide an introduction to basic ideas underlying computational models of reinforcement learning and focus on parameters and model variants that might be of interest to developmental scientists. We then highlight recent attempts to use reinforcement learning models to study the influence of social information on learning across development. The aim of this review is to illustrate how computational models can be applied in developmental science, what they can add to our understanding of developmental mechanisms and how they can be used to bridge the gap between psychological and neurobiological theories of development.

The universal computer the road from Leibniz to Turing

CERN Document Server

Davis, Martin

2011-01-01

The breathtakingly rapid pace of change in computing makes it easy to overlook the pioneers who began it all. Written by Martin Davis, respected logician and researcher in the theory of computation, The Universal Computer: The Road from Leibniz to Turing explores the fascinating lives, ideas, and discoveries of seven remarkable mathematicians. It tells the stories of the unsung heroes of the computer age -- the logicians. The story begins with Leibniz in the 17th century and then focuses on Boole, Frege, Cantor, Hilbert, and Godel, before turning to Turing. Turing's analysis of algorithmic pro

Soil structure changes evaluated with computed tomography

International Nuclear Information System (INIS)

Pires, Luiz Fernando

2010-01-01

The objective of this work was to evaluate in millimetric scale changes in soil bulk density and porosity, using the gamma-ray computed tomography in soil samples with disturbed structure due to wetting and drying (W-D) cycles. Soil samples with 98.1 cm 3 were sieved using a 2 mm mesh and homogeneously packed in PVC cylinders. Soil samples were submitted to 1, 2, and 3 W-D cycles. Control samples were not submitted to W-D cycles. After repetitions of W-D cycles, soil sample porosity decreased and soil layers became denser. Computed tomography allowed a continuous analysis of soil bulk density and also soil porosity along millimetric (0.08 cm) layers, what cannot be provided by traditional methods used in soil physics. (author)

RAPID TRANSFER ALIGNMENT USING FEDERATED KALMAN FILTER

Institute of Scientific and Technical Information of China (English)

GUDong-qing; QINYong-yuan; PENGRong; LIXin

2005-01-01

The dimension number of the centralized Kalman filter (CKF) for the rapid transfer alignment (TA) is as high as 21 if the aircraft wing flexure motion is considered in the rapid TA. The 21-dimensional CKF brings the calculation burden on the computer and the difficulty to meet a high filtering updating rate desired by rapid TA. The federated Kalman filter (FKF) for the rapid TA is proposed to solve the dilemma. The structure and the algorithm of the FKF, which can perform parallel computation and has less calculation burden, are designed.The wing flexure motion is modeled, and then the 12-order velocity matching local filter and the 15-order attitud ematching local filter are devised. Simulation results show that the proposed EKE for the rapid TA almost has the same performance as the CKF. Thus the calculation burden of the proposed FKF for the rapid TA is markedly decreased.

A computer-based matrix for rapid calculation of pulmonary hemodynamic parameters in congenital heart disease

International Nuclear Information System (INIS)

Lopes, Antonio Augusto; Miranda, Rogerio dos Anjos; Goncalves, Rilvani Cavalcante; Thomaz, Ana Maria

2009-01-01

In patients with congenital heart disease undergoing cardiac catheterization for hemodynamic purposes, parameter estimation by the indirect Fick method using a single predicted value of oxygen consumption has been a matter of criticism. We developed a computer-based routine for rapid estimation of replicate hemodynamic parameters using multiple predicted values of oxygen consumption. Using Microsoft Excel facilities, we constructed a matrix containing 5 models (equations) for prediction of oxygen consumption, and all additional formulas needed to obtain replicate estimates of hemodynamic parameters. By entering data from 65 patients with ventricular septal defects, aged 1 month to 8 years, it was possible to obtain multiple predictions for oxygen consumption, with clear between-age groups ( P <.001) and between-methods ( P <.001) differences. Using these predictions in the individual patient, it was possible to obtain the upper and lower limits of a likely range for any given parameter, which made estimation more realistic. The organized matrix allows for rapid obtainment of replicate parameter estimates, without error due to exhaustive calculations. (author)

Tropical vegetation evidence for rapid sea level changes associated with Heinrich Events

Energy Technology Data Exchange (ETDEWEB)

Gonzalez, Catalina; Dupont, Lydie M, E-mail: catalina@uni-bremen.d, E-mail: dupont@uni-bremen.d [MARUM - Centre for Marine Environmental Sciences, University of Bremen, Leobener Strasse, D-28359 Germany (Germany)

2010-03-15

A Cariaco Basin pollen record shows the development of tropical salt marshes during marine isotope stage 3. Rapid and abrupt expansions of salt marsh vegetation in tropical South America are associated with north Atlantic Heinrich Events stadials (HE-stadials). Intervals of salt marsh expansion have an internal structure, which consists of a recurrent alternation of species that starts with pollen increments of Chenopodiaceae, that are followed by increments of grasses, and subsequently by increments of Cyperaceae. This pattern suggests a successional process that is determined by the close relationship between sea-level and plant community dynamics. The salt tolerant Chenopodiaceae, indicate hypersaline intertidal environments, which were most likely promoted by extremely dry atmospheric conditions. Rapid sea-level rise characterizes the onset of HE-stadials, causing the continued recruitment of pioneer species, which are the only ones tolerating rapid rates of disturbance. Once sea-level rise decelerates, marsh plants are able to trap and stabilize sediments, favouring the establishment of more competitive species. These results add to the scarce knowledge on the dynamics of tropical salt marsh ecosystems, and provide independent paleoclimatic evidence on sea-level changes following Antarctic climate variability.

Analysis of Climatic and Environmental Changes Using CLEARS Web-GIS Information-Computational System: Siberia Case Study

Science.gov (United States)

Titov, A. G.; Gordov, E. P.; Okladnikov, I.; Shulgina, T. M.

2011-12-01

Analysis of recent climatic and environmental changes in Siberia performed on the basis of the CLEARS (CLimate and Environment Analysis and Research System) information-computational system is presented. The system was developed using the specialized software framework for rapid development of thematic information-computational systems based on Web-GIS technologies. It comprises structured environmental datasets, computational kernel, specialized web portal implementing web mapping application logic, and graphical user interface. Functional capabilities of the system include a number of procedures for mathematical and statistical analysis, data processing and visualization. At present a number of georeferenced datasets is available for processing including two editions of NCEP/NCAR Reanalysis, JMA/CRIEPI JRA-25 Reanalysis, ECMWF ERA-40 and ERA Interim Reanalysis, meteorological observation data for the territory of the former USSR, and others. Firstly, using functionality of the computational kernel employing approved statistical methods it was shown that the most reliable spatio-temporal characteristics of surface temperature and precipitation in Siberia in the second half of 20th and beginning of 21st centuries are provided by ERA-40/ERA Interim Reanalysis and APHRODITE JMA Reanalysis, respectively. Namely those Reanalyses are statistically consistent with reliable in situ meteorological observations. Analysis of surface temperature and precipitation dynamics for the territory of Siberia performed on the base of the developed information-computational system reveals fine spatial and temporal details in heterogeneous patterns obtained for the region earlier. Dynamics of bioclimatic indices determining climate change impact on structure and functioning of regional vegetation cover was investigated as well. Analysis shows significant positive trends of growing season length accompanied by statistically significant increase of sum of growing degree days and total

Integrated ocean management as a strategy to meet rapid climate change: the Norwegian case.

Science.gov (United States)

Hoel, Alf Håkon; Olsen, Erik

2012-02-01

The prospects of rapid climate change and the potential existence of tipping points in marine ecosystems where nonlinear change may result from them being overstepped, raises the question of strategies for coping with ecosystem change. There is broad agreement that the combined forces of climate change, pollution and increasing economic activities necessitates more comprehensive approaches to oceans management, centering on the concept of ecosystem-based oceans management. This article addresses the Norwegian experience in introducing integrated, ecosystem-based oceans management, emphasizing how climate change, seen as a major long-term driver of change in ecosystems, is addressed in management plans. Understanding the direct effects of climate variability and change on ecosystems and indirect effects on human activities is essential for adaptive planning to be useful in the long-term management of the marine environment.

[Developmental changes of rapid automatized naming and Hiragana reading of Japanese in elementary-school children].

Science.gov (United States)

Kobayashi, Tomoka; Inagaki, Masumi; Gunji, Atsuko; Yatabe, Kiyomi; Kita, Yosuke; Kaga, Makiko; Gotoh, Takaaki; Koike, Toshihide

2011-11-01

Two hundred and seven Japanese elementary school children aged from 6 (Grade 1) to 12 (Grade 6) years old were tested for their abilities to name numbers and pictured objects along with reading Hiragana characters and words. These children all showed typical development and their classroom teachers judged that they were not having any problems with reading or writing. The children were randomly divided into two groups, the first group was assigned to two naming tasks;the rapid automatized naming (RAN) of "numbers" and "pictured objects," the second group was assigned to two rapid alternative stimulus (RAS) naming tasks using numbers and pictured objects. All children were asked to perform two reading tasks that were written in Hiragana script: single mora reading task and four syllable word reading task. The total articulation time for naming and reading and performance in terms of accuracy were measured for each task. Developmental changes in these variables were evaluated. The articulation time was significantly longer for the first graders, and it gradually shortened as they moved through to the upper grades in all tasks. The articulation time reached a plateau in the 5th grade for the number naming, while gradual change continued after drastic change in the lower grades for the pictured object naming. The articulation times for the single mora reading and RAN of numbers correlated strongly. The articulation time for the RAS naming was significantly longer compared to that for the RAN, though there were very few errors. The RAS naming showed the highest correlation with the four syllable word reading. This study demonstrated that the performance in rapid automatized naming of numbers and pictures were closely related with performance on reading tasks. Thus Japanese children with reading disorders such as developmental dyslexia should also be evaluated for rapid automatized naming.

Evidence Accumulation and Change Rate Inference in Dynamic Environments.

Science.gov (United States)

Radillo, Adrian E; Veliz-Cuba, Alan; Josić, Krešimir; Kilpatrick, Zachary P

2017-06-01

In a constantly changing world, animals must account for environmental volatility when making decisions. To appropriately discount older, irrelevant information, they need to learn the rate at which the environment changes. We develop an ideal observer model capable of inferring the present state of the environment along with its rate of change. Key to this computation is an update of the posterior probability of all possible change point counts. This computation can be challenging, as the number of possibilities grows rapidly with time. However, we show how the computations can be simplified in the continuum limit by a moment closure approximation. The resulting low-dimensional system can be used to infer the environmental state and change rate with accuracy comparable to the ideal observer. The approximate computations can be performed by a neural network model via a rate-correlation-based plasticity rule. We thus show how optimal observers accumulate evidence in changing environments and map this computation to reduced models that perform inference using plausible neural mechanisms.

Rapid, computer vision-enabled murine screening system identifies neuropharmacological potential of two new mechanisms

Directory of Open Access Journals (Sweden)

Steven L Roberds

2011-09-01

Full Text Available The lack of predictive in vitro models for behavioral phenotypes impedes rapid advancement in neuropharmacology and psychopharmacology. In vivo behavioral assays are more predictive of activity in human disorders, but such assays are often highly resource-intensive. Here we describe the successful application of a computer vision-enabled system to identify potential neuropharmacological activity of two new mechanisms. The analytical system was trained using multiple drugs that are used clinically to treat depression, schizophrenia, anxiety, and other psychiatric or behavioral disorders. During blinded testing the PDE10 inhibitor TP-10 produced a signature of activity suggesting potential antipsychotic activity. This finding is consistent with TP-10’s activity in multiple rodent models that is similar to that of clinically used antipsychotic drugs. The CK1ε inhibitor PF-670462 produced a signature consistent with anxiolytic activity and, at the highest dose tested, behavioral effects similar to that of opiate analgesics. Neither TP-10 nor PF-670462 was included in the training set. Thus, computer vision-based behavioral analysis can facilitate drug discovery by identifying neuropharmacological effects of compounds acting through new mechanisms.

Alveolar bone changes after asymmetric rapid maxillary expansion.

Science.gov (United States)

Akin, Mehmet; Baka, Zeliha Muge; Ileri, Zehra; Basciftci, Faruk Ayhan

2015-09-01

To quantitatively evaluate the effects of asymmetric rapid maxillary expansion (ARME) on cortical bone thickness and buccal alveolar bone height (BABH), and to determine the formation of dehiscence and fenestration in the alveolar bone surrounding the posterior teeth, using cone-beam computed tomography (CBCT). The CBCT records of 23 patients with true unilateral posterior skeletal crossbite (10 boys, 14.06 ± 1.08 years old, and 13 girls, 13.64 ± 1.32 years old) who had undergone ARME were selected from our clinic archives. The bonded acrylic ARME appliance, including an occlusal stopper, was used on all patients. CBCT records had been taken before ARME (T1) and after the 3-month retention period (T2). Axial slices of the CBCT images at 3 vertical levels were used to evaluate the buccal and palatal aspects of the canines, first and second premolars, and first molars. Paired samples and independent sample t-tests were used for statistical comparison. The results suggest that buccal cortical bone thickness of the affected side was significantly more affected by the expansion than was the unaffected side (P ARME significantly reduced the BABH of the canines (P ARME also increased the incidence of dehiscence and fenestration on the affected side. ARME may quantitatively decrease buccal cortical bone thickness and height on the affected side.

Combinatorial algorithms enabling computational science: tales from the front

International Nuclear Information System (INIS)

Bhowmick, Sanjukta; Boman, Erik G; Devine, Karen; Gebremedhin, Assefaw; Hendrickson, Bruce; Hovland, Paul; Munson, Todd; Pothen, Alex

2006-01-01

Combinatorial algorithms have long played a crucial enabling role in scientific and engineering computations. The importance of discrete algorithms continues to grow with the demands of new applications and advanced architectures. This paper surveys some recent developments in this rapidly changing and highly interdisciplinary field

Combinatorial algorithms enabling computational science: tales from the front

Energy Technology Data Exchange (ETDEWEB)

Bhowmick, Sanjukta [Mathematics and Computer Science Division, Argonne National Laboratory (United States); Boman, Erik G [Discrete Algorithms and Math Department, Sandia National Laboratories (United States); Devine, Karen [Discrete Algorithms and Math Department, Sandia National Laboratories (United States); Gebremedhin, Assefaw [Computer Science Department, Old Dominion University (United States); Hendrickson, Bruce [Discrete Algorithms and Math Department, Sandia National Laboratories (United States); Hovland, Paul [Mathematics and Computer Science Division, Argonne National Laboratory (United States); Munson, Todd [Mathematics and Computer Science Division, Argonne National Laboratory (United States); Pothen, Alex [Computer Science Department, Old Dominion University (United States)

2006-09-15

Combinatorial algorithms have long played a crucial enabling role in scientific and engineering computations. The importance of discrete algorithms continues to grow with the demands of new applications and advanced architectures. This paper surveys some recent developments in this rapidly changing and highly interdisciplinary field.

[COMPUTER ASSISTED DESIGN AND ELECTRON BEAMMELTING RAPID PROTOTYPING METAL THREE-DIMENSIONAL PRINTING TECHNOLOGY FOR PREPARATION OF INDIVIDUALIZED FEMORAL PROSTHESIS].

Science.gov (United States)

Liu, Hongwei; Weng, Yiping; Zhang, Yunkun; Xu, Nanwei; Tong, Jing; Wang, Caimei

2015-09-01

To study the feasibility of preparation of the individualized femoral prosthesis through computer assisted design and electron beammelting rapid prototyping (EBM-RP) metal three-dimensional (3D) printing technology. One adult male left femur specimen was used for scanning with 64-slice spiral CT; tomographic image data were imported into Mimics15.0 software to reconstruct femoral 3D model, then the 3D model of individualized femoral prosthesis was designed through UG8.0 software. Finally the 3D model data were imported into EBM-RP metal 3D printer to print the individualized sleeve. According to the 3D model of individualized prosthesis, customized sleeve was successfully prepared through the EBM-RP metal 3D printing technology, assembled with the standard handle component of SR modular femoral prosthesis to make the individualized femoral prosthesis. Customized femoral prosthesis accurately matching with metaphyseal cavity can be designed through the thin slice CT scanning and computer assisted design technology. Titanium alloy personalized prosthesis with complex 3D shape, pore surface, and good matching with metaphyseal cavity can be manufactured by the technology of EBM-RP metal 3D printing, and the technology has convenient, rapid, and accurate advantages.

OSL sensitivity changes during single aliquot procedures: Computer simulations

DEFF Research Database (Denmark)

McKeever, S.W.S.; Agersnap Larsen, N.; Bøtter-Jensen, L.

1997-01-01

We present computer simulations of sensitivity changes obtained during single aliquot, regeneration procedures. The simulations indicate that the sensitivity changes are the combined result of shallow trap and deep trap effects. Four separate processes have been identified. Although procedures can...... be suggested to eliminate the shallow trap effects, it appears that the deep trap effects cannot be removed. The character of the sensitivity changes which result from these effects is seen to be dependent upon several external parameters, including the extent of bleaching of the OSL signal, the laboratory...

Strategic Implications of Cloud Computing for Modeling and Simulation (Briefing)

Science.gov (United States)

2016-04-01

Quick deployment • Easier scale of services • Scalability • Rapid development, deployments, and change management • Agility • Efficiency • High...Resource Pooling: Outsources computing infrastructure, reducing or eliminating the need for organizations to offer extensive IT services. • Measured

Computed Tomography-Enhanced Anatomy Course Using Enterprise Visualization

Science.gov (United States)

May, Hila; Cohen, Haim; Medlej, Bahaa; Kornreich, Liora; Peled, Nathan; Hershkovitz, Israel

2013-01-01

Rapid changes in medical knowledge are forcing continuous adaptation of the basic science courses in medical schools. This article discusses a three-year experience developing a new Computed Tomography (CT)-based anatomy curriculum at the Sackler School of Medicine, Tel Aviv University, including describing the motivations and reasoning for the…

Rapid Hip Osteoarthritis Development in a Patient with Anterior Acetabular Cyst with Sagittal Alignment Change

Directory of Open Access Journals (Sweden)

Yasuhiro Homma

2014-01-01

Full Text Available Rapidly destructive coxarthrosis (RDC is rare and develops unusual clinical course. Recent studies suggest multiple possible mechanisms of the development of RDC. However the exact mechanism of RDC is still not clear. The difficulty of the study on RDC is attributed to its rareness and the fact that the data before the onset of RDC is normally unavailable. In this report, we presented the patient having the radiographic data before the onset who had rapid osteoarthritis (OA development after contralateral THA, which meets the current criteria of RDC. We thought that the increased posterior tilt of the pelvis after THA reinforced the stress concentration at pre-existed anterior acetabular cyst, thereby the destruction of the cyst was occurred. As a result the rapid OA was developed. We think that there is the case of rapid osteoarthritis developing due to alternating load concentration by posterior pelvic tilt on preexisting anterior acetabular cyst such as our patient among the cases diagnosed as RDC without any identifiable etiology. The recognition of sagittal alignment changes and anterior acetabular cyst may play important role in prediction and prevention of the rapid hip osteoarthritis development similar to RDC.

SU-F-J-102: Lower Esophagus Margin Implications Based On Rapid Computational Algorithm for SBRT

Energy Technology Data Exchange (ETDEWEB)

Cardenas, M; Mazur, T; Li, H; Mutic, S; Bradley, J; Tsien, C; Green, O [Washington University School of Medicine, Saint Louis, MO (United States)

2016-06-15

Purpose: To quantify inter-fraction esophagus-variation. Methods: Computed tomography and daily on-treatment 0.3-T MRI data sets for 7 patients were analyzed using a novel Matlab-based (Mathworks, Natick, MA) rapid computational method. Rigid registration was performed from the cricoid to the gastro-esophageal junction. CT and MR-based contours were compared at slice intervals of 3mm. Variation was quantified by “expansion,” defined as additional length in any radial direction from CT contour to MR contour. Expansion computations were performed with 360° of freedom in each axial slice. We partitioned expansions into left anterior, right anterior, right posterior, and left posterior quadrants (LA, RA, RP, and LP, respectively). Sample means were compared by analysis of variance (ANOVA) and Fisher’s Protected Least Significant Difference test. Results: Fifteen fractions and 1121 axial slices from 7 patients undergoing SBRT for primary lung cancer (3) and metastatic lung disease (4) were analyzed, generating 41,970 measurements. Mean LA, RA, RP, and LP expansions were 4.30±0.05 mm, 3.71±0.05mm, 3.17±0.07, and 3.98±0.06mm, respectively. 50.13% of all axial slices showed variation > 5 mm in one or more directions. Variation was greatest in lower esophagus with mean LA, RA, RP, and LP expansion (5.98±0.09 mm, 4.59±0.09 mm, 4.04±0.16 mm, and 5.41±0.16 mm, respectively). The difference was significant compared to mid and upper esophagus (p<.0001). The 95th percentiles of expansion for LA, RA, RP, LP were 13.36 mm, 9.97 mm, 11.29 mm, and 12.19 mm, respectively. Conclusion: Analysis of on-treatment MR imaging of the lower esophagus during thoracic SBRT suggests margin expansions of 13.36 mm LA, 9.97 mm RA, 11.29 mm RP, 12.19 mm LP would account for 95% of measurements. Our novel algorithm for rapid assessment of margin expansion for critical structures with 360° of freedom in each axial slice enables continuously adaptive patient-specific margins which may

Computer processing of microscopic images of bacteria : morphometry and fluorimetry

NARCIS (Netherlands)

Wilkinson, Michael H.F.; Jansen, Gijsbert J.; Waaij, Dirk van der

1994-01-01

Several techniques that use computer analysis of microscopic images have been developed to study the complicated microbial flora in the human intestine, including measuring the shape and fluorescence intensity of bacteria. These techniques allow rapid assessment of changes in the intestinal flora

A computational role for bistability and traveling waves in motor cortex

Directory of Open Access Journals (Sweden)

Stewart eHeitmann

2012-09-01

Full Text Available Adaptive changes in behavior require rapid changes in brain states yet the brain must also remain stable. We investigated two neural mechanisms for evoking rapid transitions between spatiotemporal synchronization patterns of beta oscillations (13--30Hz in motor cortex. Cortex was modeled as a sheet of neural oscillators that were spatially coupled using a center-surround connection topology. Manipulating the inhibitory surround was found to evoke reliable transitions between synchronous oscillation patterns and traveling waves. These transitions modulated the simulated local field potential in agreement with physiological observations in humans. Intermediate levels of surround inhibition were also found to produce bistable coupling topologies that supported both waves and synchrony. State-dependent perturbation between bistable states produced very rapid transitions but were less reliable. We surmise that motor cortex may thus employ state-dependent computation to achieve very rapid changes between bistable motor states when the demand for speed exceeds the demand for accuracy.

Analysis of changes in water cycle across Northern Eurasia with Rapid Integrated Mapping and Analysis System (RIMS)

Science.gov (United States)

Shiklomanov, A.; Prusevich, A.

2012-04-01

Historical and contemporary changes in various components of the hydrological cycle across the Northern Eurasia have been investigated using multiple observational and modeled data compiled in Rapid Integrated Mapping and Analysis System (RIMS) for North Eurasian Earth Science Partnership Initiative (NEESPI). To evaluate potential future patterns of change in the Northern Eurasian water cycle we have used climate change projections simulated by several coupled Atmosphere-Ocean General Circulation Models (AO GCMs). Future changes in hydrological regime were assessed using the UNH Water Balance and Water Transport Models (WBM/WTM) which take into account water management including irrigation and reservoir regulation. We found significant shifts in the regional hydrology and quantified potential natural and anthropogenic causes of these changes. The results of our historical and future analysis have demonstrated an intensification of hydrological cycle in many regions of the Northern Eurasia observed over 50-60 year period with accelerated rate during the last decade. Based on climate projections we can expect that the current rate of changes to continue over the course of XXI century. A significant part of the analysis and quantitative estimates of water cycle trends in Northern Eurasia has been done using RIMS online and offline data analysis tools. RIMS has been developed by the Water Systems Analysis Group at the University of New Hampshire, USA for the NEESPI program. Presently, the RIMS data pool is composed of a variety of themes including climate, hydrology, land cover, human dimension, and others. It comprises over five thousand single layer (e.g. soil type) and time series (e.g. daily runoff) raster GIS coverages, and a number of climate and hydrology station/point network datasets. The system streamlines data mining, management and model feeds in the computational environment of large and diverse data holdings. In this presentation we want to demonstrate

Evolution under changing climates: climatic niche stasis despite rapid evolution in a non-native plant.

Science.gov (United States)

Alexander, Jake M

2013-09-22

A topic of great current interest is the capacity of populations to adapt genetically to rapidly changing climates, for example by evolving the timing of life-history events, but this is challenging to address experimentally. I use a plant invasion as a model system to tackle this question by combining molecular markers, a common garden experiment and climatic niche modelling. This approach reveals that non-native Lactuca serriola originates primarily from Europe, a climatic subset of its native range, with low rates of admixture from Asia. It has rapidly refilled its climatic niche in the new range, associated with the evolution of flowering phenology to produce clines along climate gradients that mirror those across the native range. Consequently, some non-native plants have evolved development times and grow under climates more extreme than those found in Europe, but not among populations from the native range as a whole. This suggests that many plant populations can adapt rapidly to changed climatic conditions that are already within the climatic niche space occupied by the species elsewhere in its range, but that evolution to conditions outside of this range is more difficult. These findings can also help to explain the prevalence of niche conservatism among non-native species.

Specific changes in rapidly transported proteins during regeneration of the goldfish optic nerve

International Nuclear Information System (INIS)

Benowitz, L.I.; Shashoua, V.E.; Yoon, M.G.

1981-01-01

Double labeling methods were used to identify changes in the complement of proteins synthesized in the retinal ganglion cells and transported down the optic nerve during the process of axonal regeneration. Eight to 62 days after goldfish underwent a unilateral optic nerve crush, one eye was labeled with [3H]-, the other with [14C]proline. Control and regenerating optic nerves were dissected out and homogenized together after 5 hr, a time which allowed us to examine selectively membrane-bound components which migrate in the rapid phase of axoplasmic transport. Proteins from the two sides were so-purified and separated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Analysis of the 3H and 14C incorporation patterns along the gels revealed a radical shift away from the normal labeling spectrum during regeneration, with selective changes in labeling at particular molecular weights varying over a 3-fold range. Eight days after crushing the optic nerve, the greatest increases in labeling were seen for material with apparent molecular weights of 24,000 to 27,000, 44,000, and 210,000 daltons. These peaks declined thereafter, and on days 29 to 39, the most prominent increases were at 110,000 to 140,000 daltons. These studies indicate a continuously changing pattern in the synthesis and/or degradation of proteins that are rapidly transported down the optic nerve during regeneration and point to molecular species potential significance in the establishment of the visual map upon the brain

Rapidly Assessing Changes in Bone Mineral Balance Using Natural Stable Calcium Isotopes

Science.gov (United States)

Morgan, J. L. L.; Gordon, G. W.; Romaniello, S. J.; Skulan, J. L.; Smith, S. M.; Anbar, A. D.

2011-01-01

We demonstrate that variations in the Ca isotope ratios in urine rapidly and quantitatively reflect changes in bone mineral balance. This variation occurs because bone formation depletes soft tissue of light Ca isotopes, while bone resorption releases that isotopically light Ca back into soft tissue. In a study of 12 individuals confined to bed rest, a condition known to induce bone resorption, we show that Ca isotope ratios shift in a direction consistent with net bone loss after just 7 days, long before detectible changes in bone density occur. Consistent with this interpretation, the Ca isotope variations track changes observed in N-teleopeptide, a bone resorption biomarker, while bone-specific alkaline phosphatase, a bone formation biomarker, is unchanged. Ca isotopes can in principle be used to quantify net changes in bone mass. Ca isotopes indicate an average loss of 0.62 +/- 0.16 % in bone mass over the course of this 30-day study. The Ca isotope technique should accelerate the pace of discovery of new treatments for bone disease and provide novel insights into the dynamics of bone metabolism.

OVERVIEW OF DEVELOPMENT OF P-CARES: PROBABILISTIC COMPUTER ANALYSIS FOR RAPID EVALUATION OF STRUCTURES

International Nuclear Information System (INIS)

NIE, J.; XU, J.; COSTANTINO, C.; THOMAS, V.

2007-01-01

Brookhaven National Laboratory (BNL) undertook an effort to revise the CARES (Computer Analysis for Rapid Evaluation of Structures) program under the auspices of the US Nuclear Regulatory Commission (NRC). The CARES program provided the NRC staff a capability to quickly check the validity and/or accuracy of the soil-structure interaction (SSI) models and associated data received from various applicants. The aim of the current revision was to implement various probabilistic simulation algorithms in CARES (referred hereinafter as P-CARES [1]) for performing the probabilistic site response and soil-structure interaction (SSI) analyses. This paper provides an overview of the development process of P-CARES, including the various probabilistic simulation techniques used to incorporate the effect of site soil uncertainties into the seismic site response and SSI analyses and an improved graphical user interface (GUI)

More rapid climate change promotes evolutionary rescue through selection for increased dispersal distance.

Science.gov (United States)

Boeye, Jeroen; Travis, Justin M J; Stoks, Robby; Bonte, Dries

2013-02-01

Species can either adapt to new conditions induced by climate change or shift their range in an attempt to track optimal environmental conditions. During current range shifts, species are simultaneously confronted with a second major anthropogenic disturbance, landscape fragmentation. Using individual-based models with a shifting climate window, we examine the effect of different rates of climate change on the evolution of dispersal distances through changes in the genetically determined dispersal kernel. Our results demonstrate that the rate of climate change is positively correlated to the evolved dispersal distances although too fast climate change causes the population to crash. When faced with realistic rates of climate change, greater dispersal distances evolve than those required for the population to keep track of the climate, thereby maximizing population size. Importantly, the greater dispersal distances that evolve when climate change is more rapid, induce evolutionary rescue by facilitating the population in crossing large gaps in the landscape. This could ensure population persistence in case of range shifting in fragmented landscapes. Furthermore, we highlight problems in using invasion speed as a proxy for potential range shifting abilities under climate change.

Unconventional Quantum Computing Devices

OpenAIRE

Lloyd, Seth

2000-01-01

This paper investigates a variety of unconventional quantum computation devices, including fermionic quantum computers and computers that exploit nonlinear quantum mechanics. It is shown that unconventional quantum computing devices can in principle compute some quantities more rapidly than `conventional' quantum computers.

Rapid change of ion energy distribution and floating potential at L/H transition in the JFT-2M tokamak

International Nuclear Information System (INIS)

Miura, Y.; Nagashima, K.; Okano, F.

1994-01-01

Rapid changes of the main ion energy distribution at transitions from L-to-H, H-to-L and during ELMs are studied with the time of flight neutral measurement in the JFT-2M tokamak. The change of the main ion energy distribution after sawtooth crash during an L-mode phase is also studied. The change of the ion energy distribution just after sawtooth crash is the same as that at L/H-transition. The floating potential measured in the SOL also shows the rapid jump to more positive just after the sawtooth crash (at the same time of the change of an ion energy distribution). This shows the increase of ion outflux in the SOL and might correspond to the change of the ion energy distribution. This may be the reason why most of H-modes are triggered by a sawtooth. (author)

Rapid genetic algorithm optimization of a mouse computational model: Benefits for anthropomorphization of neonatal mouse cardiomyocytes

Directory of Open Access Journals (Sweden)

Corina Teodora Bot

2012-11-01

Full Text Available While the mouse presents an invaluable experimental model organism in biology, its usefulness in cardiac arrhythmia research is limited in some aspects due to major electrophysiological differences between murine and human action potentials (APs. As previously described, these species-specific traits can be partly overcome by application of a cell-type transforming clamp (CTC to anthropomorphize the murine cardiac AP. CTC is a hybrid experimental-computational dynamic clamp technique, in which a computationally calculated time-dependent current is inserted into a cell in real time, to compensate for the differences between sarcolemmal currents of that cell (e.g., murine and the desired species (e.g., human. For effective CTC performance, mismatch between the measured cell and a mathematical model used to mimic the measured AP must be minimal. We have developed a genetic algorithm (GA approach that rapidly tunes a mathematical model to reproduce the AP of the murine cardiac myocyte under study. Compared to a prior implementation that used a template-based model selection approach, we show that GA optimization to a cell-specific model results in a much better recapitulation of the desired AP morphology with CTC. This improvement was more pronounced when anthropomorphizing neonatal mouse cardiomyocytes to human-like APs than to guinea pig APs. CTC may be useful for a wide range of applications, from screening effects of pharmaceutical compounds on ion channel activity, to exploring variations in the mouse or human genome. Rapid GA optimization of a cell-specific mathematical model improves CTC performance and may therefore expand the applicability and usage of the CTC technique.

Comparison of computed tomography and radiography for detecting changes induced by malignant nasal neoplasia in dogs

International Nuclear Information System (INIS)

Park, R.D.; Beck, E.R.; LeCouteur, R.A.

1992-01-01

The ability of computed tomography and radiography to detect changes associated with nasal neoplasia was compared in dogs. Eighteen areas or anatomic structures were evaluated in 21 dogs for changes indicative of neoplasia. Computed tomography was superior (P < or = 0.05) to radiography for detecting changes in 14 of 18 areas. Radiography was not superior for detecting changes in any structure or area. Computed tomography reveals vital information not always detected radiographically to assist in providing a prognosis and in planning treatment for nasal neoplasms in dogs

A survey of computational physics introductory computational science

CERN Document Server

Landau, Rubin H; Bordeianu, Cristian C

2008-01-01

Computational physics is a rapidly growing subfield of computational science, in large part because computers can solve previously intractable problems or simulate natural processes that do not have analytic solutions. The next step beyond Landau's First Course in Scientific Computing and a follow-up to Landau and Páez's Computational Physics, this text presents a broad survey of key topics in computational physics for advanced undergraduates and beginning graduate students, including new discussions of visualization tools, wavelet analysis, molecular dynamics, and computational fluid dynamics

New computational paradigms changing conceptions of what is computable

CERN Document Server

Cooper, SB; Sorbi, Andrea

2007-01-01

This superb exposition of a complex subject examines new developments in the theory and practice of computation from a mathematical perspective. It covers topics ranging from classical computability to complexity, from biocomputing to quantum computing.

Rapid lung MRI in children with pulmonary infections: Time to change our diagnostic algorithms.

Science.gov (United States)

Sodhi, Kushaljit Singh; Khandelwal, Niranjan; Saxena, Akshay Kumar; Singh, Meenu; Agarwal, Ritesh; Bhatia, Anmol; Lee, Edward Y

2016-05-01

To determine the diagnostic utility of a new rapid MRI protocol, as compared with computed tomography (CT) for the detection of various pulmonary and mediastinal abnormalities in children with suspected pulmonary infections. Seventy-five children (age range of 5 to 15 years) with clinically suspected pulmonary infections were enrolled in this prospective study, which was approved by the institutional ethics committee. All patients underwent thoracic MRI (1.5T) and CT (64 detector) scan within 48 h of each other. The sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of MRI were evaluated with CT as a standard of reference. Inter-observer agreement was measured with the kappa coefficient. MRI with a new rapid MRI protocol demonstrated sensitivity, specificity, PPV, and NPV of 100% for detecting pulmonary consolidation, nodules (>3 mm), cyst/cavity, hyperinflation, pleural effusion, and lymph nodes. The kappa-test showed almost perfect agreement between MRI and multidetector CT (MDCT) in detecting thoracic abnormalities (k = 0.9). No statistically significant difference was observed between MRI and MDCT for detecting thoracic abnormalities by the McNemar test (P = 0.125). Rapid lung MRI was found to be comparable to MDCT for detecting thoracic abnormalities in pediatric patients with clinically suspected pulmonary infections. It has a great potential as the first line cross-sectional imaging modality of choice in this patient population. However, further studies will be helpful for confirmation of our findings. © 2015 Wiley Periodicals, Inc.

Building new computational models to support health behavior change and maintenance: new opportunities in behavioral research.

Science.gov (United States)

Spruijt-Metz, Donna; Hekler, Eric; Saranummi, Niilo; Intille, Stephen; Korhonen, Ilkka; Nilsen, Wendy; Rivera, Daniel E; Spring, Bonnie; Michie, Susan; Asch, David A; Sanna, Alberto; Salcedo, Vicente Traver; Kukakfa, Rita; Pavel, Misha

2015-09-01

Adverse and suboptimal health behaviors and habits are responsible for approximately 40 % of preventable deaths, in addition to their unfavorable effects on quality of life and economics. Our current understanding of human behavior is largely based on static "snapshots" of human behavior, rather than ongoing, dynamic feedback loops of behavior in response to ever-changing biological, social, personal, and environmental states. This paper first discusses how new technologies (i.e., mobile sensors, smartphones, ubiquitous computing, and cloud-enabled processing/computing) and emerging systems modeling techniques enable the development of new, dynamic, and empirical models of human behavior that could facilitate just-in-time adaptive, scalable interventions. The paper then describes concrete steps to the creation of robust dynamic mathematical models of behavior including: (1) establishing "gold standard" measures, (2) the creation of a behavioral ontology for shared language and understanding tools that both enable dynamic theorizing across disciplines, (3) the development of data sharing resources, and (4) facilitating improved sharing of mathematical models and tools to support rapid aggregation of the models. We conclude with the discussion of what might be incorporated into a "knowledge commons," which could help to bring together these disparate activities into a unified system and structure for organizing knowledge about behavior.

[Digital imaging system are rapidly introduced in Swedish departments of radiography. This calls for new strategic planning].

Science.gov (United States)

Laurin, S; Norberg, K A

2000-10-11

Diagnostic radiology in Sweden is changing rapidly to digital (filmless) technique. The advantages are more rapid delivery of radiologic service, better working conditions and less negative effects on the environment. Teleradiology is also facilitated. The Swedish Board of Health and Welfare has investigated the speed with which this change is taking place. In 1998, 26 of the 118 departments of diagnostic radiology had already turned digital; it is estimated that in the near future at least five departments will become fully digital each year. For planning purposes, less emphasis should be put on the supply of radiographic film, and more on telecommunications, computer hardware and digital storage.

Exploring data with RapidMiner

CERN Document Server

Chisholm, Andrew

2013-01-01

A step-by-step tutorial style using examples so that users of different levels will benefit from the facilities offered by RapidMiner.If you are a computer scientist or an engineer who has real data from which you want to extract value, this book is ideal for you. You will need to have at least a basic awareness of data mining techniques and some exposure to RapidMiner.

Mobile Computing Changing the Traditional Ways of Organizing the Construction Company

OpenAIRE

Nataa uman; Mirko Punder

2008-01-01

The focus of this paper is to represent some important mobile computing potential which help tackle project collaboration and information dissemination problems. Especially in the construction industry where workers have no steady working places mobile computing is shown as a chance for optimising the traditional ways of organizing Construction Company. Special attention is given to the description of changing the current information system as well as to the hierarchical organization structur...

Changes to a modelling approach with the use of computer

DEFF Research Database (Denmark)

Andresen, Mette

2006-01-01

of teaching materials on differential equations. One of the objectives of the project was changes at two levels: 1) Changes at curriculum level and 2) Changes in the intentions of modelling and using models. The paper relates the changes at these two levels and discusses how the use of computer can serve......This paper reports on a Ph.D. project, which was part of a larger research- and development project (see www.matnatverdensklasse.dk). In the reported part of the project, each student had had a laptop at his disposal for at least two years. The Ph.D. project inquires the try out in four classes...

Modulators of mercury risk to wildlife and humans in the context of rapid global change

Science.gov (United States)

Eagles-Smith, Collin A.; Silbergeld, Ellen K.; Basu, Niladri; Bustamante, Paco; Diaz-Barriga, Fernando; Hopkins, William A.; Kidd, Karen A.; Nyland, Jennifer F.

2018-01-01

Environmental mercury (Hg) contamination is an urgent global health threat. The complexity of Hg in the environment can hinder accurate determination of ecological and human health risks, particularly within the context of the rapid global changes that are altering many ecological processes, socioeconomic patterns, and other factors like infectious disease incidence, which can affect Hg exposures and health outcomes. However, the success of global Hg-reduction efforts depends on accurate assessments of their effectiveness in reducing health risks. In this paper, we examine the role that key extrinsic and intrinsic drivers play on several aspects of Hg risk to humans and organisms in the environment. We do so within three key domains of ecological and human health risk. First, we examine how extrinsic global change drivers influence pathways of Hg bioaccumulation and biomagnification through food webs. Next, we describe how extrinsic socioeconomic drivers at a global scale, and intrinsic individual-level drivers, influence human Hg exposure. Finally, we address how the adverse health effects of Hg in humans and wildlife are modulated by a range of extrinsic and intrinsic drivers within the context of rapid global change. Incorporating components of these three domains into research and monitoring will facilitate a more holistic understanding of how ecological and societal drivers interact to influence Hg health risks.

Computationally designed libraries for rapid enzyme stabilization

NARCIS (Netherlands)

Wijma, Hein J.; Floor, Robert J.; Jekel, Peter A.; Baker, David; Marrink, Siewert J.; Janssen, Dick B.

The ability to engineer enzymes and other proteins to any desired stability would have wide-ranging applications. Here, we demonstrate that computational design of a library with chemically diverse stabilizing mutations allows the engineering of drastically stabilized and fully functional variants

Rapid evolution of phenology during range expansion with recent climate change.

Science.gov (United States)

Lustenhouwer, Nicky; Wilschut, Rutger A; Williams, Jennifer L; van der Putten, Wim H; Levine, Jonathan M

2018-02-01

Although climate warming is expected to make habitat beyond species' current cold range edge suitable for future colonization, this new habitat may present an array of biotic or abiotic conditions not experienced within the current range. Species' ability to shift their range with climate change may therefore depend on how populations evolve in response to such novel environmental conditions. However, due to the recent nature of thus far observed range expansions, the role of rapid adaptation during climate change migration is only beginning to be understood. Here, we evaluated evolution during the recent native range expansion of the annual plant Dittrichia graveolens, which is spreading northward in Europe from the Mediterranean region. We examined genetically based differentiation between core and edge populations in their phenology, a trait that is likely under selection with shorter growing seasons and greater seasonality at northern latitudes. In parallel common garden experiments at range edges in Switzerland and the Netherlands, we grew plants from Dutch, Swiss, and central and southern French populations. Population genetic analysis following RAD-sequencing of these populations supported the hypothesized central France origins of the Swiss and Dutch range edge populations. We found that in both common gardens, northern plants flowered up to 4 weeks earlier than southern plants. This differentiation in phenology extended from the core of the range to the Netherlands, a region only reached from central France over approximately the last 50 years. Fitness decreased as plants flowered later, supporting the hypothesized benefits of earlier flowering at the range edge. Our results suggest that native range expanding populations can rapidly adapt to novel environmental conditions in the expanded range, potentially promoting their ability to spread. © 2017 John Wiley & Sons Ltd.

Whole brain analysis of postmortem density changes of grey and white matter on computed tomography by statistical parametric mapping

Energy Technology Data Exchange (ETDEWEB)

Nishiyama, Yuichi; Mori, Hiroshi; Katsube, Takashi; Kitagaki, Hajime [Shimane University Faculty of Medicine, Department of Radiology, Izumo-shi, Shimane (Japan); Kanayama, Hidekazu; Tada, Keiji; Yamamoto, Yasushi [Shimane University Hospital, Department of Radiology, Izumo-shi, Shimane (Japan); Takeshita, Haruo [Shimane University Faculty of Medicine, Department of Legal Medicine, Izumo-shi, Shimane (Japan); Kawakami, Kazunori [Fujifilm RI Pharma, Co., Ltd., Tokyo (Japan)

2017-06-15

This study examined the usefulness of statistical parametric mapping (SPM) for investigating postmortem changes on brain computed tomography (CT). This retrospective study included 128 patients (23 - 100 years old) without cerebral abnormalities who underwent unenhanced brain CT before and after death. The antemortem CT (AMCT) scans and postmortem CT (PMCT) scans were spatially normalized using our original brain CT template, and postmortem changes of CT values (in Hounsfield units; HU) were analysed by the SPM technique. Compared with AMCT scans, 58.6 % and 98.4 % of PMCT scans showed loss of the cerebral sulci and an unclear grey matter (GM)-white matter (WM) interface, respectively. SPM analysis revealed a significant decrease in cortical GM density within 70 min after death on PMCT scans, suggesting cytotoxic brain oedema. Furthermore, there was a significant increase in the density of the WM, lenticular nucleus and thalamus more than 120 min after death. The SPM technique demonstrated typical postmortem changes on brain CT scans, and revealed that the unclear GM-WM interface on early PMCT scans is caused by a rapid decrease in cortical GM density combined with a delayed increase in WM density. SPM may be useful for assessment of whole brain postmortem changes. (orig.)

Whole brain analysis of postmortem density changes of grey and white matter on computed tomography by statistical parametric mapping

International Nuclear Information System (INIS)

Nishiyama, Yuichi; Mori, Hiroshi; Katsube, Takashi; Kitagaki, Hajime; Kanayama, Hidekazu; Tada, Keiji; Yamamoto, Yasushi; Takeshita, Haruo; Kawakami, Kazunori

2017-01-01

This study examined the usefulness of statistical parametric mapping (SPM) for investigating postmortem changes on brain computed tomography (CT). This retrospective study included 128 patients (23 - 100 years old) without cerebral abnormalities who underwent unenhanced brain CT before and after death. The antemortem CT (AMCT) scans and postmortem CT (PMCT) scans were spatially normalized using our original brain CT template, and postmortem changes of CT values (in Hounsfield units; HU) were analysed by the SPM technique. Compared with AMCT scans, 58.6 % and 98.4 % of PMCT scans showed loss of the cerebral sulci and an unclear grey matter (GM)-white matter (WM) interface, respectively. SPM analysis revealed a significant decrease in cortical GM density within 70 min after death on PMCT scans, suggesting cytotoxic brain oedema. Furthermore, there was a significant increase in the density of the WM, lenticular nucleus and thalamus more than 120 min after death. The SPM technique demonstrated typical postmortem changes on brain CT scans, and revealed that the unclear GM-WM interface on early PMCT scans is caused by a rapid decrease in cortical GM density combined with a delayed increase in WM density. SPM may be useful for assessment of whole brain postmortem changes. (orig.)

The Difference Engine: Computing, Knowledge, and the Transformation of Learning

Science.gov (United States)

Provenzo, Eugene F.

2011-01-01

Since the 1960s, the rapid evolution of technology has created a new cultural geography--a virtual geography. "The Difference Engine: Computing, Knowledge and the Transformation of Learning" offers a conscious critique of this change and its effects on contemporary culture and education. This engaging text assumes that we are at a critical…

[Has high-definition spiral computed tomography changed the management of patients with acute pulmonary embolism?].

Science.gov (United States)

Pesavento, Raffaele; de Conti, Giorgio; Minotto, Isabella; Prandoni, Paolo

2008-12-01

Pulmonary embolism (PE) is a common condition carrying a significant degree of mortality if not diagnosed early. The diagnosis of PE is challenging, because of the non-specific nature of its clinical features. For many years the diagnostic strategies for PE have mainly involved ventilation/perfusion lung scan as the chief diagnostic procedure, often associated with a few clinical models of pre-test probability and the D-dimer test. These modalities of diagnosing PE, though quite satisfactory in various clinical settings, show several limitations, the most important one being the high rate of non-diagnostic procedures. The introduction of computed tomography (CT) has changed the diagnostic strategies and has become the main diagnostic procedure for diagnosing PE. CT is undergoing a rapid technological upgrade, which will open in the near future new frontiers in the diagnosis of PE. Nonetheless, CT carries a number of limitations, which should be carefully identified. This article reviews the evidences on both the traditional and newer diagnostic strategies for PE, outlines their strengths and weaknesses and describes future applications of CT for diagnosing PE.

A complex-plane strategy for computing rotating polytropic models - Numerical results for strong and rapid differential rotation

International Nuclear Information System (INIS)

Geroyannis, V.S.

1990-01-01

In this paper, a numerical method, called complex-plane strategy, is implemented in the computation of polytropic models distorted by strong and rapid differential rotation. The differential rotation model results from a direct generalization of the classical model, in the framework of the complex-plane strategy; this generalization yields very strong differential rotation. Accordingly, the polytropic models assume extremely distorted interiors, while their boundaries are slightly distorted. For an accurate simulation of differential rotation, a versatile method, called multiple partition technique is developed and implemented. It is shown that the method remains reliable up to rotation states where other elaborate techniques fail to give accurate results. 11 refs

The role of employee assistance programs in the era of rapid change in the health care delivery system.

Science.gov (United States)

Sumerall, S W; Israel, A R; Brewer, R; Prew, R E

1999-01-01

With the rapid changes occurring in the American healthcare system, questions regarding various aspects of care have arisen. These changes have led to the need for individuals working within an Employee Assistance Program (EAP) to respond quickly and effectively to crisis situations. This article summarizes the different roles and responsibilities of EAP workers in the healthcare marketplace.

Rapid landscape change in 6th century northern Jordan: interdisciplinary geoarchaeological perspectives

Science.gov (United States)

Lucke, Bernhard

2016-04-01

Landscapes of the ancient fertile crescent are considered affected by soil degradation as result of long-term farming since the Neolithic, and impressive ruins of antiquity led to assumptions that their abandonment must have been conntected with reduced agricultural productivity. In this context, a valley fill near the site of Abila of the Decapolis in northern Jordan was apparently deposited largely during the 6th century AD, and provides evidence for a rapid and intense landscape change during the Late Byzantine period. However, an interdisciplinary case study of land use, soil development, and sediments found that the valley fill cannot be connected with large-scale soil erosion in the vicinity of the site. On the one hand, this is indicated by the distribution of soil development and archaeological material as marker of past land use activity in the past, which suggests that the best soils were and still are used intensively. On the other hand, the sediments seem to point to the occurrence of climatic extremes such as heavy floods, the occurrence of soil creep after water saturation, but also a significant shift to aridity which may have triggered socio-economic changes of subsistence strategies from agriculture to pastoralism. The dates of sediments which are available so far indicate that the climatic change seemingly occurred rapidly within approximately 100 years during the late 6th and early 7th century AD, possibly connected with the "year without sun" or 'Mystery Veil' which the Byzantine historian Procopius described in the year 536 AD. Modern analogies of the Pinatubo eruption in 1991 let it seem possible that a volcanic event, perhaps the outbreak of the Ilopango volcano, was connected with these environmental turbulences. Such events cannot be understood by isolated studies: without a broad interdisciplinary framework, single archives are prone to misinterpretation, and our understanding of the environmental history of Abila is still very limited.

Discussion on the Technology and Method of Computer Network Security Management

Science.gov (United States)

Zhou, Jianlei

2017-09-01

With the rapid development of information technology, the application of computer network technology has penetrated all aspects of society, changed people's way of life work to a certain extent, brought great convenience to people. But computer network technology is not a panacea, it can promote the function of social development, but also can cause damage to the community and the country. Due to computer network’ openness, easiness of sharing and other characteristics, it had a very negative impact on the computer network security, especially the loopholes in the technical aspects can cause damage on the network information. Based on this, this paper will do a brief analysis on the computer network security management problems and security measures.

Cone beam computed tomography: basics and applications in dentistry.

Science.gov (United States)

Venkatesh, Elluru; Elluru, Snehal Venkatesh

2017-01-01

The introduction of cone beam computed tomography (CBCT) devices, changed the way oral and maxillofacial radiology is practiced. CBCT was embraced into the dental settings very rapidly due to its compact size, low cost, low ionizing radiation exposure when compared to medical computed tomography. Alike medical CT, 3 dimensional evaluation of the maxillofacial region with minimal distortion is offered by the CBCT. This article provides an overview of basics of CBCT technology and reviews the specific application of CBCT technology to oral and maxillofacial region with few illustrations.

Rapid gene expression changes in peripheral blood lymphocytes upon practice of a comprehensive yoga program.

Directory of Open Access Journals (Sweden)

Su Qu

Full Text Available One of the most common integrative medicine (IM modalities is yoga and related practices. Previous work has shown that yoga may improve wellness in healthy people and have benefits for patients. However, the mechanisms of how yoga may positively affect the mind-body system are largely unknown. Here we have assessed possible rapid changes in global gene expression profiles in the peripheral blood mononuclear cells (PBMCs in healthy people that practiced either a comprehensive yoga program or a control regimen. The experimental sessions included gentle yoga postures, breathing exercises, and meditation (Sudarshan Kriya and Related Practices--SK&P compared with a control regimen of a nature walk and listening to relaxing music. We show that the SK&P program has a rapid and significantly greater effect on gene expression in PBMCs compared with the control regimen. These data suggest that yoga and related practices result in rapid gene expression alterations which may be the basis for their longer term cell biological and higher level health effects.

Climate Change Discourse in Mass Media: Application of Computer-Assisted Content Analysis

Science.gov (United States)

Kirilenko, Andrei P.; Stepchenkova, Svetlana O.

2012-01-01

Content analysis of mass media publications has become a major scientific method used to analyze public discourse on climate change. We propose a computer-assisted content analysis method to extract prevalent themes and analyze discourse changes over an extended period in an objective and quantifiable manner. The method includes the following: (1)…

Wiki management a revolutionary new model for a rapidly changing and collaborative world

CERN Document Server

Collins, Rod

2013-01-01

We now live in a "wiki" world where mass collaboration is not only possible-it's often the best solution. Conventional management thought assumes that command-and-control is the most effective way to organize the efforts of large numbers of people, but rapid change and increasing complexity have rendered that model obsolete. As a result, most managers today lack the skills and knowledge needed to succeed in an age when networks are proving smarter and faster than hierarchies. Designing organizations for mass collaboration demands a new and very different model-wiki management.

Observation of reversible, rapid changes in drug susceptibility of hypoxic tumor cells in a microfluidic device

Energy Technology Data Exchange (ETDEWEB)

Germain, Todd; Ansari, Megan; Pappas, Dimitri, E-mail: d.pappas@ttu.edu

2016-09-14

Hypoxia is a major stimulus for increased drug resistance and for survival of tumor cells. Work from our group and others has shown that hypoxia increases resistance to anti-cancer compounds, radiation, and other damage-pathway cytotoxic agents. In this work we utilize a microfluidic culture system capable of rapid switching of local oxygen concentrations to determine changes in drug resistance in prostate cancer cells. We observed rapid adaptation to hypoxia, with drug resistance to 2 μM staurosporine established within 30 min of hypoxia. Annexin-V/Sytox Green apoptosis assays over 9 h showed 78.0% viability, compared to 84.5% viability in control cells (normoxic cells with no staurosporine). Normoxic cells exposed to the same staurosporine concentration had a viability of 48.6% after 9 h. Hypoxia adaptation was rapid and reversible, with Hypoxic cells treated with 20% oxygen for 30 min responding to staurosporine with 51.6% viability after drug treatment for 9 h. Induction of apoptosis through the receptor-mediated pathway, which bypasses anti-apoptosis mechanisms induced by hypoxia, resulted in 39.4 ± 7% cell viability. The rapid reversibility indicates co-treatment of oxygen with anti-cancer compounds may be a potential therapeutic target. - Highlights: • Microfluidic system switches rapidly between normoxia and hypoxia (5 min). • Observation of rapid adaptation of PC3 cells to hypoxia and normoxia (30 min). • Drug susceptibility in tumor cells restored after chip switched to normoxia for 30 min.

The impact of changing computing technology on EPRI [Electric Power Research Institute] nuclear analysis codes

International Nuclear Information System (INIS)

Breen, R.J.

1988-01-01

The Nuclear Reload Management Program of the Nuclear Power Division (NPD) of the Electric Power Research Institute (EPRI) has the responsibility for initiating and managing applied research in selected nuclear engineering analysis functions for nuclear utilities. The computer systems that result from the research projects consist of large FORTRAN programs containing elaborate computational algorithms used to access such areas as core physics, fuel performance, thermal hydraulics, and transient analysis. This paper summarizes a study of computing technology trends sponsored by the NPD. The approach taken was to interview hardware and software vendors, industry observers, and utility personnel focusing on expected changes that will occur in the computing industry over the next 3 to 5 yr. Particular emphasis was placed on how these changes will impact engineering/scientific computer code development, maintenance, and use. In addition to the interviews, a workshop was held with attendees from EPRI, Power Computing Company, industry, and utilities. The workshop provided a forum for discussing issues and providing input into EPRI's long-term computer code planning process

Computer Assisted Instructional Design for Computer-Based Instruction. Final Report. Working Papers.

Science.gov (United States)

Russell, Daniel M.; Pirolli, Peter

Recent advances in artificial intelligence and the cognitive sciences have made it possible to develop successful intelligent computer-aided instructional systems for technical and scientific training. In addition, computer-aided design (CAD) environments that support the rapid development of such computer-based instruction have also been recently…

Patient specific ankle-foot orthoses using rapid prototyping.

Science.gov (United States)

Mavroidis, Constantinos; Ranky, Richard G; Sivak, Mark L; Patritti, Benjamin L; DiPisa, Joseph; Caddle, Alyssa; Gilhooly, Kara; Govoni, Lauren; Sivak, Seth; Lancia, Michael; Drillio, Robert; Bonato, Paolo

2011-01-12

Prefabricated orthotic devices are currently designed to fit a range of patients and therefore they do not provide individualized comfort and function. Custom-fit orthoses are superior to prefabricated orthotic devices from both of the above-mentioned standpoints. However, creating a custom-fit orthosis is a laborious and time-intensive manual process performed by skilled orthotists. Besides, adjustments made to both prefabricated and custom-fit orthoses are carried out in a qualitative manner. So both comfort and function can potentially suffer considerably. A computerized technique for fabricating patient-specific orthotic devices has the potential to provide excellent comfort and allow for changes in the standard design to meet the specific needs of each patient. In this paper, 3D laser scanning is combined with rapid prototyping to create patient-specific orthoses. A novel process was engineered to utilize patient-specific surface data of the patient anatomy as a digital input, manipulate the surface data to an optimal form using Computer Aided Design (CAD) software, and then download the digital output from the CAD software to a rapid prototyping machine for fabrication. Two AFOs were rapidly prototyped to demonstrate the proposed process. Gait analysis data of a subject wearing the AFOs indicated that the rapid prototyped AFOs performed comparably to the prefabricated polypropylene design. The rapidly prototyped orthoses fabricated in this study provided good fit of the subject's anatomy compared to a prefabricated AFO while delivering comparable function (i.e. mechanical effect on the biomechanics of gait). The rapid fabrication capability is of interest because it has potential for decreasing fabrication time and cost especially when a replacement of the orthosis is required.

Influences of sex and activity level on physiological changes in individual adult sockeye salmon during rapid senescence.

Science.gov (United States)

Hruska, Kimberly A; Hinch, Scott G; Healey, Michael C; Patterson, David A; Larsson, Stefan; Farrell, Anthony P

2010-01-01

A noninvasive biopsy protocol was used to sample plasma and gill tissue in individual sockeye salmon (Oncorhynchus nerka) during the critical life stage associated with spawning-arrival at a spawning channel through senescence to death several days later. Our main objective was to characterize the physiological changes associated with rapid senescence in terms of the physiological stress/cortisol hypersecretion model and the energy exhaustion model. Salmon lived an average of 5 d in the spawning channel, during which time there were three major physiological trends that were independent of sexual status: a large increase in plasma indicators of stress and exercise (i.e., lactate and cortisol), a decrease in the major plasma ions (i.e., Cl(-) and Na(+)) and osmolality, and a decrease in gross somatic energy reserves. Contrary to a generalized stress response, plasma glucose decreased in approximately 2/3 of the fish after arrival, as opposed to increasing. Furthermore, plasma cortisol levels at spawning-ground arrival were not correlated with the degree of ionoregulatory changes during rapid senescence. One mechanism of mortality in some fish may involve the exhaustion of energy reserves, resulting in the inability to mobilize plasma glucose. Sex had a significant modulating effect on the degree of physiological change. Females exhibited a greater magnitude of change for gross somatic energy, osmolality, and plasma concentrations of Cl(-), Na(+), cortisol, testosterone, 11-ketotestosterone, 17,20beta-progesterone, and estradiol. The activity level of an individual on the spawning grounds appeared to influence the degree of some physiological changes during senescence. For example, males that received a greater frequency of attacks exhibited larger net decreases in plasma 11-ketotestosterone while on the spawning grounds. These results suggest that rapid senescence on spawning grounds is influenced by multiple physiological processes and perhaps behavior. This study

Computational composites

DEFF Research Database (Denmark)

Vallgårda, Anna K. A.; Redström, Johan

2007-01-01

Computational composite is introduced as a new type of composite material. Arguing that this is not just a metaphorical maneuver, we provide an analysis of computational technology as material in design, which shows how computers share important characteristics with other materials used in design...... and architecture. We argue that the notion of computational composites provides a precise understanding of the computer as material, and of how computations need to be combined with other materials to come to expression as material. Besides working as an analysis of computers from a designer’s point of view......, the notion of computational composites may also provide a link for computer science and human-computer interaction to an increasingly rapid development and use of new materials in design and architecture....

Change in size, shape and radiocolloid uptake of the alcoholic liver during alcohol withdrawal, as demonstrated by single photon emission computed tomography

International Nuclear Information System (INIS)

Blomquist, L.; Yansen Wang; Jacobsson, H.; Kimiaei, S.

1994-01-01

The volume of the total liver and separate right and left lobes was studied before and after 1 week of alcohol withdrawal in 16 consecutive alcoholics by means of single photon emission computed tomography after intravenous injection of 99 Tc m -human albumin colloid; the relative tissue distribution of radioactivity was also followed. The left liver lobe increased in volume more than the right lobe during drinking and decreased more rapidly after alcohol withdrawal. Median volume reductions during 1 week of alcohol withdrawal were: total liver 12%, left lob 26%, and right lobe 8%, indicating that half of the reduction to values of a control group was achieved during this first week. The volume of the right but not of the left lobe was significantly correlated to body size in alcoholics and in controls. The left lobe had a lower capacity to concentrate the radiocolloid than the right lobe in alcoholics and in controls. The liver/spleen, liver/bone marrow and liver/background radioactivity concentration ratios in the alcoholics increased during alcohol withdrawal We conclude that heavy drinking causes both an increased total liver volume and a change in liver shape, with a relatively more enlarged left right lobe, as well as a decreased capacity to concentrate radiocolloid. These changes are rapidly reversible during abstinence from alcohol. (au) (26 refs.)

Altering plasma sodium concentration rapidly changes blood pressure during haemodialysis.

Science.gov (United States)

Suckling, Rebecca J; Swift, Pauline A; He, Feng J; Markandu, Nirmala D; MacGregor, Graham A

2013-08-01

Plasma sodium is increased following each meal containing salt. There is an increasing interest in the effects of plasma sodium concentration, and it has been suggested that it may have direct effects on blood pressure (BP) and possibly influences endothelial function. Experimental increases of plasma sodium concentration rapidly raise BP even when extracellular volume falls. Ten patients with end-stage renal failure established on haemodialysis were studied during the first 2 h of dialysis without fluid removal during this period. They were randomized to receive haemodialysis with (i) dialysate sodium concentration prescribed to 135 mmol/L and (ii) 145 mmol/L in random order in a prospective, single-blinded crossover study. BP measurements and blood samples were taken every 30 min. Pre-dialysis sitting BP was 137/76 ± 7/3 mmHg. Lower dialysate sodium concentration (135 mmol/L) reduced plasma sodium concentration [139.49 ± 0.67 to 135.94 ± 0.52 mmol/L (P area under the curve (AUC) 15823.50 ± 777.15 (mmHg)min] compared with 145 mmol/L [AUC 17018.20 ± 1102.17 (mmHg)min], mean difference 1194.70 ± 488.41 (mmHg)min, P < 0.05. There was a significant positive relationship between change in plasma sodium concentration and change in systolic BP. This direct relationship suggests that a fall of 1 mmol/L in plasma sodium concentration would be associated with a 1.7 mmHg reduction in systolic BP (P < 0.05). The potential mechanism for the increase in BP seen with salt intake may be through small but significant changes in plasma sodium concentration.

Rapid socio-cultural change and health in the Arctic

DEFF Research Database (Denmark)

Bjerregaard, P

2001-01-01

The colonization of the circumpolar peoples has had a profound influence on their health. History tells about devastating epidemics and the introduction of alcohol. The last 50 years have witnessed an unprecedented societal development in Greenland and a rapid epidemiological transition. Physical...... health and survival have improved but at the expense of mental health. The incidence of tuberculosis and the infant mortality rate have decreased because of improved socioeconomic conditions and health care. Mental health has deteriorated parallel to the rapid modernization of Greenlandic society...

Rapid response to intensive treatment for bulimia nervosa and purging disorder: A randomized controlled trial of a CBT intervention to facilitate early behavior change.

Science.gov (United States)

MacDonald, Danielle E; McFarlane, Traci L; Dionne, Michelle M; David, Lauren; Olmsted, Marion P

2017-09-01

Rapid response to cognitive behavior therapy (CBT) for eating disorders (i.e., rapid and substantial change to key eating disorder behaviors in the initial weeks of treatment) robustly predicts good outcome at end-of-treatment and in follow up. The objective of this study was to determine whether rapid response to day hospital (DH) eating disorder treatment could be facilitated using a brief adjunctive CBT intervention focused on early change. 44 women (average age 27.3 [8.4]; 75% White, 6.3% Black, 6.9% Asian) were randomly assigned to 1 of 2 4-session adjunctive interventions: CBT focused on early change, or motivational interviewing (MI). DH was administered as usual. Outcomes included binge/purge frequency, Eating Disorder Examination-Questionnaire and Difficulties in Emotion Regulation Scale. Intent-to-treat analyses were used. The CBT group had a higher rate of rapid response (95.7%) compared to MI (71.4%; p = .04, V = .33). Those who received CBT also had fewer binge/purge episodes (p = .02) in the first 4 weeks of DH. By end-of-DH, CBT participants made greater improvements on overvaluation of weight and shape (p = .008), and emotion regulation (ps .05). The results of this study demonstrate that rapid response can be clinically facilitated using a CBT intervention that explicitly encourages early change. This provides the foundation for future research investigating whether enhancing rates of rapid response using such an intervention results in improved longer term outcomes. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Monitoring Forest Change in Landscapes Under-Going Rapid Energy Development: Challenges and New Perspectives

Directory of Open Access Journals (Sweden)

Paul D. Pickell

2014-07-01

Full Text Available The accelerated development of energy resources around the world has substantially increased forest change related to oil and gas activities. In some cases, oil and gas activities are the primary catalyst of land-use change in forested landscapes. We discuss the challenges associated with characterizing ecological change related to energy resource development using North America as an exemplar. We synthesize the major impacts of energy development to forested ecosystems and offer new perspectives on how to detect and monitor anthropogenic disturbance during the Anthropocene. The disturbance of North American forests for energy development has resulted in persistent linear corridors, suppression of historical disturbance regimes, novel ecosystems, and the eradication of ecological memory. Characterizing anthropogenic disturbances using conventional patch-based disturbance measures will tend to underestimate the ecological impacts of energy development. Suitable indicators of anthropogenic impacts in forests should be derived from the integration of multi-scalar Earth observations. Relating these indicators to ecosystem condition will be a capstone in the progress toward monitoring forest change in landscapes undergoing rapid energy development.

Phase field modeling of rapid crystallization in the phase-change material AIST

Science.gov (United States)

Tabatabaei, Fatemeh; Boussinot, Guillaume; Spatschek, Robert; Brener, Efim A.; Apel, Markus

2017-07-01

We carry out phase field modeling as a continuum simulation technique in order to study rapid crystallization processes in the phase-change material AIST (Ag4In3Sb67Te26). In particular, we simulate the spatio-temporal evolution of the crystallization of a molten area of the phase-change material embedded in a layer stack. The simulation model is adapted to the experimental conditions used for recent measurements of crystallization rates by a laser pulse technique. Simulations are performed for substrate temperatures close to the melting temperature of AIST down to low temperatures when an amorphous state is involved. The design of the phase field model using the thin interface limit allows us to retrieve the two limiting regimes of interface controlled (low temperatures) and thermal transport controlled (high temperatures) dynamics. Our simulations show that, generically, the crystallization velocity presents a maximum in the intermediate regime where both the interface mobility and the thermal transport, through the molten area as well as through the layer stack, are important. Simulations reveal the complex interplay of all different contributions. This suggests that the maximum switching velocity depends not only on material properties but also on the precise design of the thin film structure into which the phase-change material is embedded.

Measuring Land Change in Coastal Zone around a Rapidly Urbanized Bay

Directory of Open Access Journals (Sweden)

Faming Huang

2018-05-01

Full Text Available Urban development is a major cause for eco-degradation in many coastal regions. Understanding urbanization dynamics and underlying driving factors is crucial for urban planning and management. Land-use dynamic degree indices and intensity analysis were used to measure land changes occurred in 1990, 2002, 2009, and 2017 in the coastal zone around Quanzhou bay, which is a rapidly urbanized bay in Southeast China. The comprehensive land-use dynamic degree and interval level intensity analysis both revealed that land change was accelerating across the three time intervals in a three-kilometer-wide zone along the coastal line (zone A, while land change was fastest during the second time interval 2002–2009 in a separate terrestrial area within coastal zone (zone B. Driven by urbanization, built-up gains and cropland losses were active for all time intervals in both zones. Mudflat losses were active except in the first time interval in zone A due to the intensive sea reclamation. The gain of mangrove was active while the loss of mangrove is dormant for all three intervals in zone A. Transition level analysis further revealed the similarities and differences in processes within patterns of land changes for both zones. The transition from cropland to built-up was systematically targeted and stationary while the transition from woodland to built-up was systematically avoiding transition in both zones. Built-up tended to target aquaculture for the second and third time intervals in zone A but avoid Aquaculture for all intervals in zone B. Land change in zone A was more significant than that in zone B during the second and third time intervals at three-level intensity. The application of intensity analysis can enhance our understanding of the patterns and processes in land changes and suitable land development plans in the Quanzhou bay area. This type of investigation is useful to provide information for developing sound land use policy to achieve urban

Measuring Land Change in Coastal Zone around a Rapidly Urbanized Bay.

Science.gov (United States)

Huang, Faming; Huang, Boqiang; Huang, Jinliang; Li, Shenghui

2018-05-23

Urban development is a major cause for eco-degradation in many coastal regions. Understanding urbanization dynamics and underlying driving factors is crucial for urban planning and management. Land-use dynamic degree indices and intensity analysis were used to measure land changes occurred in 1990, 2002, 2009, and 2017 in the coastal zone around Quanzhou bay, which is a rapidly urbanized bay in Southeast China. The comprehensive land-use dynamic degree and interval level intensity analysis both revealed that land change was accelerating across the three time intervals in a three-kilometer-wide zone along the coastal line (zone A), while land change was fastest during the second time interval 2002⁻2009 in a separate terrestrial area within coastal zone (zone B). Driven by urbanization, built-up gains and cropland losses were active for all time intervals in both zones. Mudflat losses were active except in the first time interval in zone A due to the intensive sea reclamation. The gain of mangrove was active while the loss of mangrove is dormant for all three intervals in zone A. Transition level analysis further revealed the similarities and differences in processes within patterns of land changes for both zones. The transition from cropland to built-up was systematically targeted and stationary while the transition from woodland to built-up was systematically avoiding transition in both zones. Built-up tended to target aquaculture for the second and third time intervals in zone A but avoid Aquaculture for all intervals in zone B. Land change in zone A was more significant than that in zone B during the second and third time intervals at three-level intensity. The application of intensity analysis can enhance our understanding of the patterns and processes in land changes and suitable land development plans in the Quanzhou bay area. This type of investigation is useful to provide information for developing sound land use policy to achieve urban sustainability in

Rapid Prototyping Enters Mainstream Manufacturing.

Science.gov (United States)

Winek, Gary

1996-01-01

Explains rapid prototyping, a process that uses computer-assisted design files to create a three-dimensional object automatically, speeding the industrial design process. Five commercially available systems and two emerging types--the 3-D printing process and repetitive masking and depositing--are described. (SK)

Trends in computer hardware and software.

Science.gov (United States)

Frankenfeld, F M

1993-04-01

Previously identified and current trends in the development of computer systems and in the use of computers for health care applications are reviewed. Trends identified in a 1982 article were increasing miniaturization and archival ability, increasing software costs, increasing software independence, user empowerment through new software technologies, shorter computer-system life cycles, and more rapid development and support of pharmaceutical services. Most of these trends continue today. Current trends in hardware and software include the increasing use of reduced instruction-set computing, migration to the UNIX operating system, the development of large software libraries, microprocessor-based smart terminals that allow remote validation of data, speech synthesis and recognition, application generators, fourth-generation languages, computer-aided software engineering, object-oriented technologies, and artificial intelligence. Current trends specific to pharmacy and hospitals are the withdrawal of vendors of hospital information systems from the pharmacy market, improved linkage of information systems within hospitals, and increased regulation by government. The computer industry and its products continue to undergo dynamic change. Software development continues to lag behind hardware, and its high cost is offsetting the savings provided by hardware.

New layer-based imaging and rapid prototyping techniques for computer-aided design and manufacture of custom dental restoration.

Science.gov (United States)

Lee, M-Y; Chang, C-C; Ku, Y C

2008-01-01

Fixed dental restoration by conventional methods greatly relies on the skill and experience of the dental technician. The quality and accuracy of the final product depends mostly on the technician's subjective judgment. In addition, the traditional manual operation involves many complex procedures, and is a time-consuming and labour-intensive job. Most importantly, no quantitative design and manufacturing information is preserved for future retrieval. In this paper, a new device for scanning the dental profile and reconstructing 3D digital information of a dental model based on a layer-based imaging technique, called abrasive computer tomography (ACT) was designed in-house and proposed for the design of custom dental restoration. The fixed partial dental restoration was then produced by rapid prototyping (RP) and computer numerical control (CNC) machining methods based on the ACT scanned digital information. A force feedback sculptor (FreeForm system, Sensible Technologies, Inc., Cambridge MA, USA), which comprises 3D Touch technology, was applied to modify the morphology and design of the fixed dental restoration. In addition, a comparison of conventional manual operation and digital manufacture using both RP and CNC machining technologies for fixed dental restoration production is presented. Finally, a digital custom fixed restoration manufacturing protocol integrating proposed layer-based dental profile scanning, computer-aided design, 3D force feedback feature modification and advanced fixed restoration manufacturing techniques is illustrated. The proposed method provides solid evidence that computer-aided design and manufacturing technologies may become a new avenue for custom-made fixed restoration design, analysis, and production in the 21st century.

Parallel, Rapid Diffuse Optical Tomography of Breast

National Research Council Canada - National Science Library

Yodh, Arjun

2001-01-01

During the last year we have experimentally and computationally investigated rapid acquisition and analysis of informationally dense diffuse optical data sets in the parallel plate compressed breast geometry...

Parallel, Rapid Diffuse Optical Tomography of Breast

National Research Council Canada - National Science Library

Yodh, Arjun

2002-01-01

During the last year we have experimentally and computationally investigated rapid acquisition and analysis of informationally dense diffuse optical data sets in the parallel plate compressed breast geometry...

Patient specific ankle-foot orthoses using rapid prototyping

Directory of Open Access Journals (Sweden)

Sivak Seth

2011-01-01

Full Text Available Abstract Background Prefabricated orthotic devices are currently designed to fit a range of patients and therefore they do not provide individualized comfort and function. Custom-fit orthoses are superior to prefabricated orthotic devices from both of the above-mentioned standpoints. However, creating a custom-fit orthosis is a laborious and time-intensive manual process performed by skilled orthotists. Besides, adjustments made to both prefabricated and custom-fit orthoses are carried out in a qualitative manner. So both comfort and function can potentially suffer considerably. A computerized technique for fabricating patient-specific orthotic devices has the potential to provide excellent comfort and allow for changes in the standard design to meet the specific needs of each patient. Methods In this paper, 3D laser scanning is combined with rapid prototyping to create patient-specific orthoses. A novel process was engineered to utilize patient-specific surface data of the patient anatomy as a digital input, manipulate the surface data to an optimal form using Computer Aided Design (CAD software, and then download the digital output from the CAD software to a rapid prototyping machine for fabrication. Results Two AFOs were rapidly prototyped to demonstrate the proposed process. Gait analysis data of a subject wearing the AFOs indicated that the rapid prototyped AFOs performed comparably to the prefabricated polypropylene design. Conclusions The rapidly prototyped orthoses fabricated in this study provided good fit of the subject's anatomy compared to a prefabricated AFO while delivering comparable function (i.e. mechanical effect on the biomechanics of gait. The rapid fabrication capability is of interest because it has potential for decreasing fabrication time and cost especially when a replacement of the orthosis is required.

A web-based dissemination platform for climate-change risk and vulnerability

CSIR Research Space (South Africa)

Sibolla, B

2012-10-01

Full Text Available . The rapid advance in computer technology has led to heavy reliance on digital predictive modelling and digital data dissemination which have both been leveraged in this project. We present data sets of predicted climate-change variables, over selected urban...

Effects of Computer-Assisted Instruction with Conceptual Change Texts on Removing the Misconceptions of Radioactivity

Directory of Open Access Journals (Sweden)

Ahmet YUMUŞAK

2016-12-01

Full Text Available Training young scientists, enabling conceptual understanding in science education is quite important. Misconception is one of the important indications for whether the concepts are understood or not. The most important educational tools to remove misconceptions are conceptual change texts. In addition, one of the important methods to remove misconceptions is computer-assisted instruction. The goal of this study is to research the effects of the use of computer-assisted instruction (CAI, conceptual change texts (CCT, computer-assisted instruction with conceptual change texts (CAI+CCT, and use of traditional teaching method (TTM on removing the misconceptions of science teacher candidates on the subject of radioactivity. Research sample was made of totally 92 students studying at four different groups of senior students in Celal Bayar University, Faculty of Education, Department of Science Education in 2011-2012 academic year. A different teaching method was used in each group. Experimental groups were randomly determined; in the first experimental group, computer-assisted instruction was used (23 students; in the second experimental group, conceptual change texts were used (23 students; in the third experimental group, computer-assisted instruction with conceptual change texts were used (23 students; and the fourth group, on which traditional education method was used, was called control group (23 students. Two-tier misconception diagnostic instrument, which was developed by the researcher, was used as data collection tool of the research. “Nonequivalent Control Groups Experimental Design” was used in this research in order to determine the efficiency of different teaching methods. Obtained data were analyzed by using SPSS 21.0. As a result of the research, it was determined that methods used on experimental groups were more successful than traditional teaching method practiced on control group in terms of removing misconceptions on

Comparative use of the computer-aided angiography and rapid prototyping technology versus conventional imaging in the management of the Tile C pelvic fractures.

Science.gov (United States)

Li, Baofeng; Chen, Bei; Zhang, Ying; Wang, Xinyu; Wang, Fei; Xia, Hong; Yin, Qingshui

2016-01-01

Computed tomography (CT) scan with three-dimensional (3D) reconstruction has been used to evaluate complex fractures in pre-operative planning. In this study, rapid prototyping of a life-size model based on 3D reconstructions including bone and vessel was applied to evaluate the feasibility and prospect of these new technologies in surgical therapy of Tile C pelvic fractures by observing intra- and perioperative outcomes. The authors conducted a retrospective study on a group of 157 consecutive patients with Tile C pelvic fractures. Seventy-six patients were treated with conventional pre-operative preparation (A group) and 81 patients were treated with the help of computer-aided angiography and rapid prototyping technology (B group). Assessment of the two groups considered the following perioperative parameters: length of surgical procedure, intra-operative complications, intra- and postoperative blood loss, postoperative pain, postoperative nausea and vomiting (PONV), length of stay, and type of discharge. The two groups were homogeneous when compared in relation to mean age, sex, body weight, injury severity score, associated injuries and pelvic fracture severity score. Group B was performed in less time (105 ± 19 minutes vs. 122 ± 23 minutes) and blood loss (31.0 ± 8.2 g/L vs. 36.2 ± 7.4 g/L) compared with group A. Patients in group B experienced less pain (2.5 ± 2.3 NRS score vs. 2.8 ± 2.0 NRS score), and PONV affected only 8 % versus 10 % of cases. Times to discharge were shorter (7.8 ± 2.0 days vs. 10.2 ± 3.1 days) in group B, and most of patients were discharged to home. In our study, patients of Tile C pelvic fractures treated with computer-aided angiography and rapid prototyping technology had a better perioperative outcome than patients treated with conventional pre-operative preparation. Further studies are necessary to investigate the advantages in terms of clinical results in the short and long run.

Computer-related standards for the petroleum industry

International Nuclear Information System (INIS)

Winczewski, L.M.

1992-01-01

Rapid application of the computer to all areas of the petroleum industry is straining the capabilities of corporations and vendors to efficiently integrate computer tools into the work environment. Barriers to this integration arose form decades of competitive development of proprietary applications formats, along with compilation of data bases in isolation. Rapidly emerging industry-wide standards relating to computer applications and data management are poised to topple these barriers. This paper identifies the most active players within a rapidly evolving group of cooperative standardization activities sponsored by the petroleum industry. Summarized are their objectives, achievements, current activities and relationships to each other. The trends of these activities are assessed and projected

Observation of reversible, rapid changes in drug susceptibility of hypoxic tumor cells in a microfluidic device.

Science.gov (United States)

Germain, Todd; Ansari, Megan; Pappas, Dimitri

2016-09-14

Hypoxia is a major stimulus for increased drug resistance and for survival of tumor cells. Work from our group and others has shown that hypoxia increases resistance to anti-cancer compounds, radiation, and other damage-pathway cytotoxic agents. In this work we utilize a microfluidic culture system capable of rapid switching of local oxygen concentrations to determine changes in drug resistance in prostate cancer cells. We observed rapid adaptation to hypoxia, with drug resistance to 2 μM staurosporine established within 30 min of hypoxia. Annexin-V/Sytox Green apoptosis assays over 9 h showed 78.0% viability, compared to 84.5% viability in control cells (normoxic cells with no staurosporine). Normoxic cells exposed to the same staurosporine concentration had a viability of 48.6% after 9 h. Hypoxia adaptation was rapid and reversible, with Hypoxic cells treated with 20% oxygen for 30 min responding to staurosporine with 51.6% viability after drug treatment for 9 h. Induction of apoptosis through the receptor-mediated pathway, which bypasses anti-apoptosis mechanisms induced by hypoxia, resulted in 39.4 ± 7% cell viability. The rapid reversibility indicates co-treatment of oxygen with anti-cancer compounds may be a potential therapeutic target. Copyright © 2016 Elsevier B.V. All rights reserved.

Experiences of Families Transmitting Values in a Rapidly Changing Society: Implications for Family Therapists.

Science.gov (United States)

Akyil, Yudum; Prouty, Anne; Blanchard, Amy; Lyness, Kevin

2016-06-01

Intergenerational value transmission affects parent-child relationships and necessitates constant negotiation in families. Families with adolescents from rapidly changing societies face unique challenges in balancing the traditional collectivistic family values that promote harmony with emerging values that promote autonomy. Using modern Turkey as an example of such a culture, the authors examine the transmission process in families that hold more traditional and collectivistic values than their adolescent children. Special consideration is given to generational and cultural differences in the autonomy and relatedness dimensions. © 2015 Family Process Institute.

Forensic Computing (Dagstuhl Seminar 13482)

OpenAIRE

Freiling, Felix C.; Hornung, Gerrit; Polcák, Radim

2014-01-01

Forensic computing} (sometimes also called digital forensics, computer forensics or IT forensics) is a branch of forensic science pertaining to digital evidence, i.e., any legal evidence that is processed by digital computer systems or stored on digital storage media. Forensic computing is a new discipline evolving within the intersection of several established research areas such as computer science, computer engineering and law. Forensic computing is rapidly gaining importance since the...

Modification in the CITATION computer code: change of microscopic cross sections by zone

International Nuclear Information System (INIS)

Yamaguchi, M.; Kosaka, N.

1983-01-01

Some modifications done in the CITATION computer code are presented, aiming to calculate the accumulated burnup for each reactor zone in each step of burnup and allow changing the microscopic cross sections for each zone in accordance to the burnup accumulated after each step of burnup. Some input data were put in the computer code. The alterations were tested and the results were compared with and without modifications. (E.G.) [pt

Rapid Spontaneously Resolving Acute Subdural Hematoma

Science.gov (United States)

Gan, Qi; Zhao, Hexiang; Zhang, Hanmei; You, Chao

2017-01-01

Introduction: This study reports a rare patient of a rapid spontaneously resolving acute subdural hematoma. In addition, an analysis of potential clues for the phenomenon is presented with a review of the literature. Patient Presentation: A 1-year-and-2-month-old boy fell from a height of approximately 2 m. The patient was in a superficial coma with a Glasgow Coma Scale of 8 when he was transferred to the authors’ hospital. Computed tomography revealed the presence of an acute subdural hematoma with a midline shift beyond 1 cm. His guardians refused invasive interventions and chose conservative treatment. Repeat imaging after 15 hours showed the evident resolution of the hematoma and midline reversion. Progressive magnetic resonance imaging demonstrated the complete resolution of the hematoma, without redistribution to a remote site. Conclusions: Even though this phenomenon has a low incidence, the probability of a rapid spontaneously resolving acute subdural hematoma should be considered when patients present with the following characteristics: children or elderly individuals suffering from mild to moderate head trauma; stable or rapidly recovered consciousness; and simple acute subdural hematoma with a moderate thickness and a particularly low-density band in computed tomography scans. PMID:28468224

Cloud Computing Bible

CERN Document Server

Sosinsky, Barrie

2010-01-01

The complete reference guide to the hot technology of cloud computingIts potential for lowering IT costs makes cloud computing a major force for both IT vendors and users; it is expected to gain momentum rapidly with the launch of Office Web Apps later this year. Because cloud computing involves various technologies, protocols, platforms, and infrastructure elements, this comprehensive reference is just what you need if you'll be using or implementing cloud computing.Cloud computing offers significant cost savings by eliminating upfront expenses for hardware and software; its growing popularit

Mapping land cover change over continental Africa using Landsat and Google Earth Engine cloud computing.

Science.gov (United States)

Midekisa, Alemayehu; Holl, Felix; Savory, David J; Andrade-Pacheco, Ricardo; Gething, Peter W; Bennett, Adam; Sturrock, Hugh J W

2017-01-01

Quantifying and monitoring the spatial and temporal dynamics of the global land cover is critical for better understanding many of the Earth's land surface processes. However, the lack of regularly updated, continental-scale, and high spatial resolution (30 m) land cover data limit our ability to better understand the spatial extent and the temporal dynamics of land surface changes. Despite the free availability of high spatial resolution Landsat satellite data, continental-scale land cover mapping using high resolution Landsat satellite data was not feasible until now due to the need for high-performance computing to store, process, and analyze this large volume of high resolution satellite data. In this study, we present an approach to quantify continental land cover and impervious surface changes over a long period of time (15 years) using high resolution Landsat satellite observations and Google Earth Engine cloud computing platform. The approach applied here to overcome the computational challenges of handling big earth observation data by using cloud computing can help scientists and practitioners who lack high-performance computational resources.

Television, disordered eating, and young women in Fiji: negotiating body image and identity during rapid social change.

Science.gov (United States)

Becker, Anne E

2004-12-01

Although the relationship between media exposure and risk behavior among youth is established at a population level, the specific psychological and social mechanisms mediating the adverse effects of media on youth remain poorly understood. This study reports on an investigation of the impact of the introduction of television to a rural community in Western Fiji on adolescent ethnic Fijian girls in a setting of rapid social and economic change. Narrative data were collected from 30 purposively selected ethnic Fijian secondary school girls via semi-structured, open-ended interviews. Interviews were conducted in 1998, 3 years after television was first broadcast to this region of Fiji. Narrative data were analyzed for content relating to response to television and mechanisms that mediate self and body image in Fijian adolescents. Data in this sample suggest that media imagery is used in both creative and destructive ways by adolescent Fijian girls to navigate opportunities and conflicts posed by the rapidly changing social environment. Study respondents indicated their explicit modeling of the perceived positive attributes of characters presented in television dramas, but also the beginnings of weight and body shape preoccupation, purging behavior to control weight, and body disparagement. Response to television appeared to be shaped by a desire for competitive social positioning during a period of rapid social transition. Understanding vulnerability to images and values imported with media will be critical to preventing disordered eating and, potentially, other youth risk behaviors in this population, as well as other populations at risk.

Design of the Information Science and Systems (IS Curriculum in a Computer and Information Sciences Department

Directory of Open Access Journals (Sweden)

Behrooz Seyed-Abbassi

2004-12-01

Full Text Available Continuous technological changes have resulted in a rapid turnover of knowledge in the computing field. The impact of these changes directly affects the computer-related curriculum offered by educational institutions and dictates that curriculum must evolve to keep pace with technology and to provide students with the skills required by businesses. At the same time, accreditations of curricula from reviewing organizations provide additional guidelines and standardization for computing science as well as information science programs. One of the areas significantly affected by these changes is the field of information systems. This paper describes the evaluation and course structure for the undergraduate information science and systems program in the Computer and Information Sciences Department at the University of North Florida. A list of the major required and elective courses as well as an overview of the challenges encountered during the revision of the curriculum is given.

Finite element analysis (FEA) of dental implant fixture for mechanical stability and rapid osseointegration

Science.gov (United States)

Tabassum, Shafia; Murtaza, Ahmar; Ali, Hasan; Uddin, Zia Mohy; Zehra, Syedah Sadaf

2017-10-01

For rapid osseointegration of dental implant fixtures, various surface treatments including plasma spraying, hydroxyapatite coating, acid-etching, and surface grooving are used. However undesirable effects such as chemical modifications, loss of mechanical properties, prolonged processing times and post production treatment steps are often associated with these techniques. The osseointegration rate of the dental implants can be promoted by increasing the surface area of the dental implant, thus increasing the bone cells - implant material contact and allow bone tissues to grow rapidly. Additive Manufacturing (AM) techniques can be used to fabricate dental implant fixtures with desirable surface area in a single step manufacturing process. AM allows the use of Computer Aided Designing (CAD) for customised rapid prototyping of components with precise control over geometry. In this study, the dental implant fixture that replaces the tooth root was designed on commercially available software COMSOL. Nickel - titanium alloy was selected as build materials for dental implant. The geometry of the dental fixture was varied by changing the interspacing distance (thread pitch) and number of threads to increase the total surface area. Three different microstructures were introduced on the surface of dental implant. The designed models were used to examine the effect of changing geometries on the total surface area. Finite Element Analysis (FEA) was performed to investigate the effect of changing geometries on the mechanical properties of the dental implant fixtures using stress analysis.

RapidRMSD: Rapid determination of RMSDs corresponding to motions of flexible molecules.

Science.gov (United States)

Neveu, Emilie; Popov, Petr; Hoffmann, Alexandre; Migliosi, Angelo; Besseron, Xavier; Danoy, Grégoire; Bouvry, Pascal; Grudinin, Sergei

2018-03-15

The root mean square deviation (RMSD) is one of the most used similarity criteria in structural biology and bioinformatics. Standard computation of the RMSD has a linear complexity with respect to the number of atoms in a molecule, making RMSD calculations time-consuming for the large-scale modeling applications, such as assessment of molecular docking predictions or clustering of spatially proximate molecular conformations. Previously we introduced the RigidRMSD algorithm to compute the RMSD corresponding to the rigid-body motion of a molecule. In this study we go beyond the limits of the rigid-body approximation by taking into account conformational flexibility of the molecule. We model the flexibility with a reduced set of collective motions computed with e.g. normal modes or principal component analysis. The initialization of our algorithm is linear in the number of atoms and all the subsequent evaluations of RMSD values between flexible molecular conformations depend only on the number of collective motions that are selected to model the flexibility. Therefore, our algorithm is much faster compared to the standard RMSD computation for large-scale modeling applications. We demonstrate the efficiency of our method on several clustering examples, including clustering of flexible docking results and molecular dynamics (MD) trajectories. We also demonstrate how to use the presented formalism to generate pseudo-random constant-RMSD structural molecular ensembles and how to use these in cross-docking. We provide the algorithm written in C ++ as the open-source RapidRMSD library governed by the BSD-compatible license, which is available at http://team.inria.fr/nano-d/software/RapidRMSD/. The constant-RMSD structural ensemble application and clustering of MD trajectories is available at http://team.inria.fr/nano-d/software/nolb-normal-modes/. sergei.grudinin@inria.fr. Supplementary data are available at Bioinformatics.

Environmental impacts of rapid changes in water level; Milj#Latin Small Letter O With Stroke#konsekvenser av raske vannstandsendringer

Energy Technology Data Exchange (ETDEWEB)

Harby, Atle [Sintef Energy, Trondheim (Norway); Arnekleiv, Jo [NTNU, Trondheim (Norway); Bogen, Jim [NVE, Oslo (Norway)

2012-07-01

Flexible operation and peak regulation of hydropower plants (hydropeaking) leads to rapid changes in water levels and water discharge. Due to an increasing share of intermittent energy sources as wind and solar energy in Norway and Europe, we expect to see more flexible operation and increased use of hydropeaking in Norwegian hydropower plants. Environmental impacts will vary depending on local conditions and hydro operations. Some of the environmental impacts of hydropeaking and rapid changes in water level and discharge are well known, where stranding of fish has been most studied, both nationally and internationally. However, there are large knowledge gaps, and there are very few studies of rivers, lakes, reservoirs and fjords downstream of peaking hydropower plants. This report summarizes the knowledge status and presents results from three Norwegian studies with different physical conditions and hydro operations. Not all previous studies have given clear and unambiguous results, but generally we can summarize as follows: Peaking hydropower plants discharging into rivers have considerable higher potential to cause negative effects on physical and biological conditions compared to hydropower plants discharging into reservoirs, lakes and fjords. If it is technically possible to implement slow changes in hydropower production, it will reduce the negative effects on the entire ecosystem. Reducing the rate of change in water level to less than 13 cm per hour gives a significantly reduced risk for stranding of salmonid fish. As far as we know there are not similarly definite guidelines for increasing water level, or for other fish species than salmonids. Fish are more vulnerable to rapid changes in water level during winter than other seasons in Norway due to the fact that low water temperatures directly and indirectly lead to lower mobility in fish. Hydropeaking and flexible operation not leading to significant changes in wetted area will generally not have greater

The Computational Materials Repository

DEFF Research Database (Denmark)

Landis, David D.; Hummelshøj, Jens S.; Nestorov, Svetlozar

2012-01-01

The possibilities for designing new materials based on quantum physics calculations are rapidly growing, but these design efforts lead to a significant increase in the amount of computational data created. The Computational Materials Repository (CMR) addresses this data challenge and provides...

Adaptability of supercomputers to nuclear computations

International Nuclear Information System (INIS)

Asai, Kiyoshi; Ishiguro, Misako; Matsuura, Toshihiko.

1983-01-01

Recently in the field of scientific and technical calculation, the usefulness of supercomputers represented by CRAY-1 has been recognized, and they are utilized in various countries. The rapid computation of supercomputers is based on the function of vector computation. The authors investigated the adaptability to vector computation of about 40 typical atomic energy codes for the past six years. Based on the results of investigation, the adaptability of the function of vector computation that supercomputers have to atomic energy codes, the problem regarding the utilization and the future prospect are explained. The adaptability of individual calculation codes to vector computation is largely dependent on the algorithm and program structure used for the codes. The change to high speed by pipeline vector system, the investigation in the Japan Atomic Energy Research Institute and the results, and the examples of expressing the codes for atomic energy, environmental safety and nuclear fusion by vector are reported. The magnification of speed up for 40 examples was from 1.5 to 9.0. It can be said that the adaptability of supercomputers to atomic energy codes is fairly good. (Kako, I.)

Solid modeling and applications rapid prototyping, CAD and CAE theory

CERN Document Server

Um, Dugan

2016-01-01

The lessons in this fundamental text equip students with the theory of Computer Assisted Design (CAD), Computer Assisted Engineering (CAE), the essentials of Rapid Prototyping, as well as practical skills needed to apply this understanding in real world design and manufacturing settings. The book includes three main areas: CAD, CAE, and Rapid Prototyping, each enriched with numerous examples and exercises. In the CAD section, Professor Um outlines the basic concept of geometric modeling, Hermite and Bezier Spline curves theory, and 3-dimensional surface theories as well as rendering theory. The CAE section explores mesh generation theory, matrix notion for FEM, the stiffness method, and truss Equations. And in Rapid Prototyping, the author illustrates stereo lithographic theory and introduces popular modern RP technologies. Solid Modeling and Applications: Rapid Prototyping, CAD and CAE Theory is ideal for university students in various engineering disciplines as well as design engineers involved in product...

From On-Premise Software to Cloud Services: The Impact of Cloud Computing on Enterprise Software Vendors' Business Models

OpenAIRE

Boillat, Thomas; Legner, Christine

2013-01-01

Cloud computing is an emerging paradigm that allows users to conveniently access computing resources as pay-per-use services. Whereas cloud offerings such as Amazon's Elastic Compute Cloud and Google Apps are rapidly gaining a large user base, enterprise software's migration towards the cloud is still in its infancy. For software vendors the move towardscloud solutions implies profound changes in their value-creation logic. Not only are they forced to deliver fully web-enabled solutions and t...

26 CFR 1.9001-1 - Change from retirement to straight-line method of computing depreciation.

Science.gov (United States)

2010-04-01

... of computing depreciation. 1.9001-1 Section 1.9001-1 Internal Revenue INTERNAL REVENUE SERVICE....9001-1 Change from retirement to straight-line method of computing depreciation. (a) In general. The... of deductions for the depreciation of those roadway assets which are defined in this section as...

Verification of computer system PROLOG - software tool for rapid assessments of consequences of short-term radioactive releases to the atmosphere

Energy Technology Data Exchange (ETDEWEB)

Kiselev, Alexey A.; Krylov, Alexey L.; Bogatov, Sergey A. [Nuclear Safety Institute (IBRAE), Bolshaya Tulskaya st. 52, 115191, Moscow (Russian Federation)

2014-07-01

In case of nuclear and radiation accidents emergency response authorities require a tool for rapid assessments of possible consequences. One of the most significant problems is lack of data on initial state of an accident. The lack can be especially critical in case the accident occurred in a location that was not thoroughly studied beforehand (during transportation of radioactive materials for example). One of possible solutions is the hybrid method when a model that enables rapid assessments with the use of reasonable minimum of input data is used conjointly with an observed data that can be collected shortly after accidents. The model is used to estimate parameters of the source and uncertain meteorological parameters on the base of some observed data. For example, field of fallout density can be observed and measured within hours after an accident. After that the same model with the use of estimated parameters is used to assess doses and necessity of recommended and mandatory countermeasures. The computer system PROLOG was designed to solve the problem. It is based on the widely used Gaussian model. The standard Gaussian model is supplemented with several sub-models that allow to take into account: polydisperse aerosols, aerodynamic shade from buildings in the vicinity of the place of accident, terrain orography, initial size of the radioactive cloud, effective height of the release, influence of countermeasures on the doses of radioactive exposure of humans. It uses modern GIS technologies and can use web map services. To verify ability of PROLOG to solve the problem it is necessary to test its ability to assess necessary parameters of real accidents in the past. Verification of the computer system on the data of Chazhma Bay accident (Russian Far East, 1985) was published previously. In this work verification was implemented on the base of observed contamination from the Kyshtym disaster (PA Mayak, 1957) and the Tomsk accident (1993). Observations of Sr-90

Rapidly reversible redox transformation in nanophase manganese oxides at room temperature triggered by changes in hydration.

Science.gov (United States)

Birkner, Nancy; Navrotsky, Alexandra

2014-04-29

Chemisorption of water onto anhydrous nanophase manganese oxide surfaces promotes rapidly reversible redox phase changes as confirmed by calorimetry, X-ray diffraction, and titration for manganese average oxidation state. Surface reduction of bixbyite (Mn2O3) to hausmannite (Mn3O4) occurs in nanoparticles under conditions where no such reactions are seen or expected on grounds of bulk thermodynamics in coarse-grained materials. Additionally, transformation does not occur on nanosurfaces passivated by at least 2% coverage of what is likely an amorphous manganese oxide layer. The transformation is due to thermodynamic control arising from differences in surface energies of the two phases (Mn2O3 and Mn3O4) under wet and dry conditions. Such reversible and rapid transformation near room temperature may affect the behavior of manganese oxides in technological applications and in geologic and environmental settings.

Development Of A Data Assimilation Capability For RAPID

Science.gov (United States)

Emery, C. M.; David, C. H.; Turmon, M.; Hobbs, J.; Allen, G. H.; Famiglietti, J. S.

2017-12-01

The global decline of in situ observations associated with the increasing ability to monitor surface water from space motivates the creation of data assimilation algorithms that merge computer models and space-based observations to produce consistent estimates of terrestrial hydrology that fill the spatiotemporal gaps in observations. RAPID is a routing model based on the Muskingum method that is capable of estimating river streamflow over large scales with a relatively short computing time. This model only requires limited inputs: a reach-based river network, and lateral surface and subsurface flow into the rivers. The relatively simple model physics imply that RAPID simulations could be significantly improved by including a data assimilation capability. Here we present the early developments of such data assimilation approach into RAPID. Given the linear and matrix-based structure of the model, we chose to apply a direct Kalman filter, hence allowing for the preservation of high computational speed. We correct the simulated streamflows by assimilating streamflow observations and our early results demonstrate the feasibility of the approach. Additionally, the use of in situ gauges at continental scales motivates the application of our new data assimilation scheme to altimetry measurements from existing (e.g. EnviSat, Jason 2) and upcoming satellite missions (e.g. SWOT), and ultimately apply the scheme globally.

Planetary Habitability and Rapid Environmental Change: The Biological Perspective

Science.gov (United States)

Schulze-Makuch, D.; Fairen, A.; Irwin, L.

2012-12-01

Environmental conditions can change drastically and rapidly during the natural history of a planetary body. We have detailed evidence of these dramatic events from Venus, Earth, Mars, and Titan. Most of these occurrences seem to be triggered by astronomical events such as asteroid impacts or supernova explosions; others are triggered by the planet or moon itself (e.g., supervolcano eruptions). The associated question is always how these events affect the habitability of a planet, particularly the origin and presence of life. Under what conditions would such a drastic event be so catastrophic that it would prohibit the origin of life or be so devastating to existing organisms, that life would not be able to recover and be all but extinguished from a planet? Under what conditions would such an event be positive for the evolution of life, for example spurring life via mass extinctions and associated vacant habitats to the invention of new body plans and higher complexity? Here, we provide insights of what we can learn from the natural history of our own planet, which experienced many environmental disasters and abrupt climate changes, from the impact event that created the Moon to the extinction of the dinosaurs. We apply these insights to other planetary bodies and the question about the presence of life. One example is Mars, which underwent drastic environmental changes at the end of the Noachian period. Assuming that microbial life became established on Mars, could it have survived, perhaps by retreating to environmental niches? Life just starting out would have certainly been more vulnerable to extinction. But how far would it have to have evolved to be more resistant to potential extinction events? Would it have to be global in distribution to survive? Another example is Venus. Should Venus be seen as an example where life, which possibly arose in the first few hundred million years when the planet was still in the habitable zone, would have had no chance to

Verification and Validation in a Rapid Software Development Process

Science.gov (United States)

Callahan, John R.; Easterbrook, Steve M.

1997-01-01

The high cost of software production is driving development organizations to adopt more automated design and analysis methods such as rapid prototyping, computer-aided software engineering (CASE) tools, and high-level code generators. Even developers of safety-critical software system have adopted many of these new methods while striving to achieve high levels Of quality and reliability. While these new methods may enhance productivity and quality in many cases, we examine some of the risks involved in the use of new methods in safety-critical contexts. We examine a case study involving the use of a CASE tool that automatically generates code from high-level system designs. We show that while high-level testing on the system structure is highly desirable, significant risks exist in the automatically generated code and in re-validating releases of the generated code after subsequent design changes. We identify these risks and suggest process improvements that retain the advantages of rapid, automated development methods within the quality and reliability contexts of safety-critical projects.

Rapid and efficient radiosynthesis of [123I]I-PK11195, a single photon emission computed tomography tracer for peripheral benzodiazepine receptors

International Nuclear Information System (INIS)

Pimlott, Sally L.; Stevenson, Louise; Wyper, David J.; Sutherland, Andrew

2008-01-01

Introduction: [ 123 I]I-PK11195 is a high-affinity single photon emission computed tomography radiotracer for peripheral benzodiazepine receptors that has previously been used to measure activated microglia and to assess neuroinflammation in the living human brain. This study investigates the radiosynthesis of [ 123 I]I-PK11195 in order to develop a rapid and efficient method that obtains [ 123 I]I-PK11195 with a high specific activity for in vivo animal and human imaging studies. Methods: The synthesis of [ 123 I]I-PK11195 was evaluated using a solid-state interhalogen exchange method and an electrophilic iododestannylation method, where bromine and trimethylstannyl derivatives were used as precursors, respectively. In the electrophilic iododestannylation method, the oxidants peracetic acid and chloramine-T were both investigated. Results: Electrophilic iododestannylation produced [ 123 I]I-PK11195 with a higher isolated radiochemical yield and a higher specific activity than achievable using the halogen exchange method investigated. Using chloramine-T as oxidant provided a rapid and efficient method of choice for the synthesis of [ 123 I]I-PK11195. Conclusions: [ 123 I]I-PK11195 has been successfully synthesized via a rapid and efficient electrophilic iododestannylation method, producing [ 123 I]I-PK11195 with a higher isolated radiochemical yield and a higher specific activity than previously achieved

Rapid Mental Сomputation System as a Tool for Algorithmic Thinking of Elementary School Students Development

Directory of Open Access Journals (Sweden)

Rushan Ziatdinov

2012-07-01

Full Text Available In this paper, we describe the possibilities of using a rapid mental computation system in elementary education. The system consists of a number of readily memorized operations that allow one to perform arithmetic computations very quickly. These operations are actually simple algorithms which can develop or improve the algorithmic thinking of pupils. Using a rapid mental computation system allows forming the basis for the study of computer science in secondary school.

Cloud Computing : Research Issues and Implications

OpenAIRE

Marupaka Rajenda Prasad; R. Lakshman Naik; V. Bapuji

2013-01-01

Cloud computing is a rapidly developing and excellent promising technology. It has aroused the concern of the computer society of whole world. Cloud computing is Internet-based computing, whereby shared information, resources, and software, are provided to terminals and portable devices on-demand, like the energy grid. Cloud computing is the product of the combination of grid computing, distributed computing, parallel computing, and ubiquitous computing. It aims to build and forecast sophisti...

Computer problem-solving coaches for introductory physics: Design and usability studies

Science.gov (United States)

Ryan, Qing X.; Frodermann, Evan; Heller, Kenneth; Hsu, Leonardo; Mason, Andrew

2016-06-01

The combination of modern computing power, the interactivity of web applications, and the flexibility of object-oriented programming may finally be sufficient to create computer coaches that can help students develop metacognitive problem-solving skills, an important competence in our rapidly changing technological society. However, no matter how effective such coaches might be, they will only be useful if they are attractive to students. We describe the design and testing of a set of web-based computer programs that act as personal coaches to students while they practice solving problems from introductory physics. The coaches are designed to supplement regular human instruction, giving students access to effective forms of practice outside class. We present results from large-scale usability tests of the computer coaches and discuss their implications for future versions of the coaches.

The response of southern California ecosystems to Younger Dryas-like rapid climate change: Comparison of glacial terminations 1 and 5.

Science.gov (United States)

Heusser, L. E.; Hendy, I. L.

2015-12-01

The Younger Dryas is a well-known rapid climatic cooling that interrupted the Marine Isotope Stage (MIS) 1-2 deglacial warming of Termination 1. This cool event has been associated with ice sheet readvance, meridional overturning, circulation changes, and southward movement of the Intertropical Convergence Zone. In Southern California, the Younger Dryas has been associated with cooler SST, low marine productivity, a well-ventilated oxygen minimum zone, and a wetter climate. Similar rapid cooling events have been found at other terminations including Termination 5 at the MIS 11-12 deglaciation (~425 Ka) identified by ice rafting events in the North Atlantic. Here we present new pollen census data from a unique suite of cores taken from the sub-oxic sediments of Santa Barbara Basin (MV0508-15JC, MV0805-20JC, MV0508-33JC, 29JC and 21JC). These short cores, collected on a truncated anticline within SBB, provide the opportunity to examine the response of southern California terrestrial and marine ecosystems to rapid climate change during the MIS 11-12 deglaciation (Termination 5), which is identified by a bioturbated interval within a sequence of laminated sediments. During Termination 1, changes in Southern California precipitation are reflected in pollen- based reconstructions Southern California vegetation. The high precipitation of glacial montane-coniferous assemblages of pine (Pinus) and Juniper (Juniperus/Calocedrus) transitions into interglacial drought, as expresssed by arid oak (Quercus)/chaparral vegetation. The Younger Dryas interrupts the transition as a high-amplitude pulse in pine associated with increased Gramineae (grass). Termination 5 differs, as the high precipitation of glacial montane-coniferous assemblages do not transition into arid oak/chaparral vegetation. However, a Younger Dryas-like rapid climate event was associated with increased pine and grass.

The computational future for climate change research

International Nuclear Information System (INIS)

Washington, Warren M

2005-01-01

The development of climate models has a long history starting with the building of atmospheric models and later ocean models. The early researchers were very aware of the goal of building climate models which could integrate our knowledge of complex physical interactions between atmospheric, land-vegetation, hydrology, ocean, cryospheric processes, and sea ice. The transition from climate models to earth system models is already underway with coupling of active biochemical cycles. Progress is limited by present computer capability which is needed for increasingly more complex and higher resolution climate models versions. It would be a mistake to make models too complex or too high resolution. Arriving at a 'feasible' and useful model is the challenge for the climate model community. Some of the climate change history, scientific successes, and difficulties encountered with supercomputers will be presented

Development and evaluation of an office ergonomic risk checklist: ROSA--rapid office strain assessment.

Science.gov (United States)

Sonne, Michael; Villalta, Dino L; Andrews, David M

2012-01-01

The Rapid Office Strain Assessment (ROSA) was designed to quickly quantify risks associated with computer work and to establish an action level for change based on reports of worker discomfort. Computer use risk factors were identified in previous research and standards on office design for the chair, monitor, telephone, keyboard and mouse. The risk factors were diagrammed and coded as increasing scores from 1 to 3. ROSA final scores ranged in magnitude from 1 to 10, with each successive score representing an increased presence of risk factors. Total body discomfort and ROSA final scores for 72 office workstations were significantly correlated (R = 0.384). ROSA final scores exhibited high inter- and intra-observer reliability (ICCs of 0.88 and 0.91, respectively). Mean discomfort increased with increasing ROSA scores, with a significant difference occurring between scores of 3 and 5 (out of 10). A ROSA final score of 5 might therefore be useful as an action level indicating when immediate change is necessary. ROSA proved to be an effective and reliable method for identifying computer use risk factors related to discomfort. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Public health in a rapidly changing world

Directory of Open Access Journals (Sweden)

Tatiana I. Andreeva

2014-06-01

Full Text Available Several months in 2013 and 2014 have been a hardly predictable time in Ukraine, and the situation is still far from being stable. This made the editorial team of TCPHEE based in Ukraine postpone publishing consecutive issues. However, while the situation still requires practical steps, many aspects including those related to public health require analysis and debate. Thus we invite opinion pieces and studies addressing all different spheres of how public health should function under changing social circumstances. There might be a wide range of such related topics. The most obvious ones are those linked to changing living conditions. Many studies have been undertaken and published with regard to health threats to refugees, people involved in natural or technical disasters (Noji, 2005. Along with environmental health threats, there might be mental health disturbances (World Health Organization, 1992 resulting from long-term strain, losses et cetera. Another important focus is related to changes in health services provision. Crimea, which is a former Ukrainian territory now occupied by the Russian Federation, was among those in Ukraine highly affected with HIV (Dehne, Khodakevich, Hamers, & Schwartlander, 1999. This was responded by several NGOs actively providing harm reduction services to high-risk groups along with methadone substitution therapy to opiate users and antiretroviral medicines to those HIV-infected (Curtis, 2010. However, there are news reports that Russia is going to stop provision of methadone (kommersant.ru, 2014. As opiate substitution programs have been shown an effective approach towards preventing HIV transmission among people who inject drugs (MacArthur et al., 2012, such change in public health policies might affect not only most at risk populations but their partners and population as a whole as well resulting in a rapid spread of HIV. Yet another related topic is that of how health services can be organized at times of

Information technology and global change science

Energy Technology Data Exchange (ETDEWEB)

Baxter, F.P.

1990-01-01

The goal of this paper is to identify and briefly describe major existing and near term information technologies that cold have a positive impact on the topics being discussed at this conference by helping to manage the data of global change science and helping global change scientists conduct their research. Desktop computer systems have changed dramatically during the past seven years. Faster data processing can be expected in the future through full development of traditional serial computer architectures. Some other proven information technologies may be currently underutilized by global change scientists. Relational database management systems and good organization of data through the use of thoughtful database design would enable the scientific community to better share and maintain quality research data. Custodians of the data should use rigorous data administration to ensure integrity and long term value of the data resource. Still other emerging information technologies that involve the use of artificial intelligence, parallel computer architectures, and new sensors for data collection will be in relatively common use in the near term and should become part of the global science community's technical toolkit. Consideration should also be given to the establishment of Information Analysis Centers to facilitate effective organization and management of interdisciplinary data and the prototype testing and use of advanced information technology to facilitate rapid and cost-effective integration of these tools into global change science. 8 refs.

Facing Two Rapidly Spreading Internet Worms

CERN Multimedia

IT Department

2009-01-01

The Internet is currently facing a growing number of computer infections due to two rapidly spreading worms. The "Conficker" and "Downadup" worms have infected an estimated 1.1 million PCs in a 24-hour period, bringing the total number of infected computers to 3.5 million [1]. Via a single USB stick, these worms were also responsible for the infection of about 40 laptops at the last EGEE conference in Istanbul. In order to reduce the impact of these worms on CERN Windows computers, the Computer Security Team has suggested several preventive measures described here. Disabling the Windows AutoRun and AutoPlay Features The Computer Security Team and the IT/IS group have decided to disable the "AutoRun" and "AutoPlay" functionality on all centrally-managed Windows computers at CERN. When inserting CDs, DVDs or USB sticks into a PC, "AutoRun" and "AutoPlay" are responsible for automatically playing music or films stored on these media, or ...

Innovative procedure for computer-assisted genioplasty: three-dimensional cephalometry, rapid-prototyping model and surgical splint.

Science.gov (United States)

Olszewski, R; Tranduy, K; Reychler, H

2010-07-01

The authors present a new procedure of computer-assisted genioplasty. They determined the anterior, posterior and inferior limits of the chin in relation to the skull and face with the newly developed and validated three-dimensional cephalometric planar analysis (ACRO 3D). Virtual planning of the osteotomy lines was carried out with Mimics (Materialize) software. The authors built a three-dimensional rapid-prototyping multi-position model of the chin area from a medical low-dose CT scan. The transfer of virtual information to the operating room consisted of two elements. First, the titanium plates on the 3D RP model were pre-bent. Second, a surgical guide for the transfer of the osteotomy lines and the positions of the screws to the operating room was manufactured. The authors present the first case of the use of this model on a patient. The postoperative results are promising, and the technique is fast and easy-to-use. More patients are needed for a definitive clinical validation of this procedure. Copyright 2010 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Health Systems Research in a Complex and Rapidly Changing Context: Ethical Implications of Major Health Systems Change at Scale.

Science.gov (United States)

MacGregor, Hayley; Bloom, Gerald

2016-12-01

This paper discusses health policy and systems research in complex and rapidly changing contexts. It focuses on ethical issues at stake for researchers working with government policy makers to provide evidence to inform major health systems change at scale, particularly when the dynamic nature of the context and ongoing challenges to the health system can result in unpredictable outcomes. We focus on situations where 'country ownership' of HSR is relatively well established and where there is significant involvement of local researchers and close ties and relationships with policy makers are often present. We frame our discussion around two country case studies with which we are familiar, namely China and South Africa and discuss the implications for conducting 'embedded' research. We suggest that reflexivity is an important concept for health system researchers who need to think carefully about positionality and their normative stance and to use such reflection to ensure that they can negotiate to retain autonomy, whilst also contributing evidence for health system change. A research process informed by the notion of reflexive practice and iterative learning will require a longitudinal review at key points in the research timeline. Such review should include the convening of a deliberative process and should involve a range of stakeholders, including those most likely to be affected by the intended and unintended consequences of change. © 2016 The Authors Developing World Bioethics Published by John Wiley & Sons Ltd.

The Past, Present and Future of Human Computer Interaction

KAUST Repository

Churchill, Elizabeth

2018-01-16

Human Computer Interaction (HCI) focuses on how people interact with, and are transformed by computation. Our current technology landscape is changing rapidly. Interactive applications, devices and services are increasingly becoming embedded into our environments. From our homes to the urban and rural spaces, we traverse everyday. We are increasingly able toﾖoften required toﾖmanage and configure multiple, interconnected devices and program their interactions. Artificial intelligence (AI) techniques are being used to create dynamic services that learn about us and others, that make conclusions about our intents and affiliations, and that mould our digital interactions based in predictions about our actions and needs, nudging us toward certain behaviors. Computation is also increasingly embedded into our bodies. Understanding human interactions in the everyday digital and physical context. During this lecture, Elizabeth Churchill -Director of User Experience at Google- will talk about how an emerging landscape invites us to revisit old methods and tactics for understanding how people interact with computers and computation, and how it challenges us to think about new methods and frameworks for understanding the future of human-centered computation.

pulver: an R package for parallel ultra-rapid p-value computation for linear regression interaction terms.

Science.gov (United States)

Molnos, Sophie; Baumbach, Clemens; Wahl, Simone; Müller-Nurasyid, Martina; Strauch, Konstantin; Wang-Sattler, Rui; Waldenberger, Melanie; Meitinger, Thomas; Adamski, Jerzy; Kastenmüller, Gabi; Suhre, Karsten; Peters, Annette; Grallert, Harald; Theis, Fabian J; Gieger, Christian

2017-09-29

Genome-wide association studies allow us to understand the genetics of complex diseases. Human metabolism provides information about the disease-causing mechanisms, so it is usual to investigate the associations between genetic variants and metabolite levels. However, only considering genetic variants and their effects on one trait ignores the possible interplay between different "omics" layers. Existing tools only consider single-nucleotide polymorphism (SNP)-SNP interactions, and no practical tool is available for large-scale investigations of the interactions between pairs of arbitrary quantitative variables. We developed an R package called pulver to compute p-values for the interaction term in a very large number of linear regression models. Comparisons based on simulated data showed that pulver is much faster than the existing tools. This is achieved by using the correlation coefficient to test the null-hypothesis, which avoids the costly computation of inversions. Additional tricks are a rearrangement of the order, when iterating through the different "omics" layers, and implementing this algorithm in the fast programming language C++. Furthermore, we applied our algorithm to data from the German KORA study to investigate a real-world problem involving the interplay among DNA methylation, genetic variants, and metabolite levels. The pulver package is a convenient and rapid tool for screening huge numbers of linear regression models for significant interaction terms in arbitrary pairs of quantitative variables. pulver is written in R and C++, and can be downloaded freely from CRAN at https://cran.r-project.org/web/packages/pulver/ .

Dryland responses to global change suggest the potential for rapid non-linear responses to some changes but resilience to others

Science.gov (United States)

Reed, S.; Ferrenberg, S.; Tucker, C.; Rutherford, W. A.; Wertin, T. M.; McHugh, T. A.; Morrissey, E.; Kuske, C.; Belnap, J.

2017-12-01

Drylands represent our planet's largest terrestrial biome, making up over 35% of Earth's land surface. In the context of this vast areal extent, it is no surprise that recent research suggests dryland inter-annual variability and responses to change have the potential to drive biogeochemical cycles and climate at the global-scale. Further, the data we do have suggest drylands can respond rapidly and non-linearly to change. Nevertheless, our understanding of the cross-system consistency of and mechanisms behind dryland responses to a changed environment remains relatively poor. This poor understanding hinders not only our larger understanding of terrestrial ecosystem function, but also our capacity to forecast future global biogeochemical cycles and climate. Here we present data from a series of Colorado Plateau manipulation experiments - including climate, land use, and nitrogen deposition manipulations - to explore how vascular plants, microbial communities, and biological soil crusts (a community of mosses, lichens, and/or cyanobacteria living in the interspace among vascular plants in arid and semiarid ecosystems worldwide) respond to a host of environmental changes. These responses include not only assessments of community composition, but of their function as well. We will explore photosynthesis, net soil CO2 exchange, soil carbon stocks and chemistry, albedo, and nutrient cycling. The experiments were begun with independent questions and cover a range of environmental change drivers and scientific approaches, but together offer a relatively holistic picture of how some drylands can change their structure and function in response to change. In particular, the data show very high ecosystem vulnerability to particular drivers, but surprising resilience to others, suggesting a multi-faceted response of these diverse systems.

Serial changes of coronary atherosclerotic plaque: Assessment with 64-slice multi-detector computed tomography

International Nuclear Information System (INIS)

Kim, Eun Young; Kang, Doo Kyoung; Sun, Joo Sung; Choi, So Yeon

2013-01-01

Evaluate the progression of coronary atherosclerotic plaque during follow-up, and its association with cardiovascular risk factors. Fifty-six atherosclerotic patients with plaque were enrolled in this retrospective study. Patient's plaque was detected on repeat 64-slice multidetector CT scans with a mean interval of 25 ± 10 months changes in calcified and non-calcified plaque volumes and cardiovascular risk factors were assessed over time. Absolute and relative changes in plaque volume were compared, and the association between rapid progression and cardiovascular risk factors was determined. Diameter of the stenosis, length, calcified and non-calcified lesion plaque volumes increased significantly on follow-up CT. Absolute and relative annual changes in plaque volumes were significantly greater in non-calcified plaque (median, 22.7 mm 3 , 90.4%) than in calcified plaque (median, 0.7 mm 3 , 0%). Obesity, smoking, hypertension, hypercholesterolemia, and low high-density lipoprotein were significant predictors of progression of non-calcified plaque. Progression of calcified plaque was not associated with any cardiovascular risk factors. Coronary plaque volume increased significantly on follow-up CT. The rate of progression is related to non-calcified plaque than to calcified plaque. Cardiovascular risk factors are independently associated with the rapid progression of non-calcified plaque volume, but not associated with the progression of calcified plaque.

Macintosh Computer Classroom and Laboratory Security: Preventing Unwanted Changes to the System.

Science.gov (United States)

Senn, Gary J.; Smyth, Thomas J. C.

Because of the graphical interface and "openness" of the operating system, Macintosh computers are susceptible to undesirable changes by the user. This presentation discusses the advantages and disadvantages of software packages that offer protection for the Macintosh system. The two basic forms of software security packages include a…

Dental arch changes associated with rapid maxillary expansion: A retrospective model analysis study

Directory of Open Access Journals (Sweden)

Ivor M D′Souza

2015-01-01

Full Text Available Introduction: Transverse deficiency of the maxilla is a common clinical problem in orthodontics and dentofacial orthopedics. Transverse maxillary deficiency, isolated or associated with other dentofacial deformities, results in esthetic and functional impairment giving rise to several clinical manifestations such as asymmetrical facial growth, positional and functional mandibular deviations, altered dentofacial esthetics, adverse periodontal responses, unstable dental tipping, and other functional problems. Orthopedic maxillary expansion is the preferred treatment approach to increase the maxillary transverse dimension in young patients by splitting of the mid palatal suture. This orthopedic procedure has lately been subject of renewed interest in orthodontic treatment mechanics because of its potential for increasing arch perimeter to alleviate crowding in the maxillary arch without adversely affecting facial profile. Hence, the present investigation was conducted to establish a correlation between transverse expansion and changes in the arch perimeter, arch width and arch length. Methods: For this purpose, 10 subjects (five males, five females were selected who had been treated by rapid maxillary expansion (RME using hyrax rapid palatal expander followed by fixed mechanotherapy (PEA. Pretreatment (T1, postexpansion (T2, and posttreatment (T3 dental models were compared for dental changes brought about by RME treatment and its stability at the end of fixed mechanotherapy. After model measurements were made, the changes between T1-T2, T2-T3 and T1-T3 were determined for each patient. The mean difference between T1-T2, T2-T3 and T1-T3 were compared to assess the effects of RME on dental arch measurements. Results are expressed as mean ± standard deviation and are compared by repeated measures analysis of variance followed by a post-hoc test. Arch perimeter changes are correlated with changes in arch widths at the canine, premolar and molar

Portable computers - portable operating systems

International Nuclear Information System (INIS)

Wiegandt, D.

1985-01-01

Hardware development has made rapid progress over the past decade. Computers used to have attributes like ''general purpose'' or ''universal'', nowadays they are labelled ''personal'' and ''portable''. Recently, a major manufacturing company started marketing a portable version of their personal computer. But even for these small computers the old truth still holds that the biggest disadvantage of a computer is that it must be programmed, hardware by itself does not make a computer. (orig.)

Rapid shifts in Atta cephalotes fungus-garden enzyme activity after a change in fungal substrate (Attini, Formicidae)

DEFF Research Database (Denmark)

Kooij, P W; Schiøtt, M; Boomsma, J J

2011-01-01

Fungus gardens of the basidiomycete Leucocoprinus gongylophorus sustain large colonies of leaf-cutting ants by degrading the plant material collected by the ants. Recent studies have shown that enzyme activity in these gardens is primarily targeted toward starch, proteins and the pectin matrix......, we measured the changes in enzyme activity after a controlled shift in fungal substrate offered to six laboratory colonies of Atta cephalotes. An ant diet consisting exclusively of grains of parboiled rice rapidly increased the activity of endo-proteinases and some of the pectinases attacking...... from the rice diet, relative to the leaf diet controls. Enzyme activity in the older, bottom sections of fungus gardens decreased, indicating a faster processing of the rice substrate compared to the leaf diet. These results suggest that leaf-cutting ant fungus gardens can rapidly adjust enzyme...

Rapid characterisation of vegetation structure to predict refugia and climate change impacts across a global biodiversity hotspot.

Directory of Open Access Journals (Sweden)

Antonius G T Schut

Full Text Available Identification of refugia is an increasingly important adaptation strategy in conservation planning under rapid anthropogenic climate change. Granite outcrops (GOs provide extraordinary diversity, including a wide range of taxa, vegetation types and habitats in the Southwest Australian Floristic Region (SWAFR. However, poor characterization of GOs limits the capacity of conservation planning for refugia under climate change. A novel means for the rapid identification of potential refugia is presented, based on the assessment of local-scale environment and vegetation structure in a wider region. This approach was tested on GOs across the SWAFR. Airborne discrete return Light Detection And Ranging (LiDAR data and Red Green and Blue (RGB imagery were acquired. Vertical vegetation profiles were used to derive 54 structural classes. Structural vegetation types were described in three areas for supervised classification of a further 13 GOs across the region. Habitat descriptions based on 494 vegetation plots on and around these GOs were used to quantify relationships between environmental variables, ground cover and canopy height. The vegetation surrounding GOs is strongly related to structural vegetation types (Kappa = 0.8 and to its spatial context. Water gaining sites around GOs are characterized by taller and denser vegetation in all areas. The strong relationship between rainfall, soil-depth, and vegetation structure (R(2 of 0.8-0.9 allowed comparisons of vegetation structure between current and future climate. Significant shifts in vegetation structural types were predicted and mapped for future climates. Water gaining areas below granite outcrops were identified as important putative refugia. A reduction in rainfall may be offset by the occurrence of deeper soil elsewhere on the outcrop. However, climate change interactions with fire and water table declines may render our conclusions conservative. The LiDAR-based mapping approach presented

Water System Adaptation To Hydrological Changes: Module 11, Methods and Tools: Computational Models

Science.gov (United States)

This course will introduce students to the fundamental principles of water system adaptation to hydrological changes, with emphasis on data analysis and interpretation, technical planning, and computational modeling. Starting with real-world scenarios and adaptation needs, the co...

Innovation in regulation of rapidly changing health markets.

Science.gov (United States)

Bloom, Gerald; Henson, Spencer; Peters, David H

2014-06-24

The rapid evolution and spread of health markets across low and middle-income countries (LMICs) has contributed to a significant increase in the availability of health-related goods and services around the world. The support institutions needed to regulate these markets have lagged behind, with regulatory systems that are weak and under-resourced. This paper explores the key issues associated with regulation of health markets in LMICs, and the different goals of regulation, namely quality and safety of care, value for money, social agreement over fair access and financing, and accountability. Licensing, price controls, and other traditional approaches to the regulation of markets for health products and services have played an important role, but they have been of questionable effectiveness in ensuring safety and efficacy at the point of the user in LMICs. The paper proposes a health market systems conceptual framework, using the value chain for the production, distribution and retail of health goods and services, to examine regulation of health markets in the LMIC context. We conclude by exploring the changing context going forwards, laying out implications for future heath market regulation. We argue that the case for new approaches to the regulation of markets for health products and services in LMICs is compelling. Although traditional "command and control" approaches will have a place in the toolkit of regulators, a broader bundle of approaches is needed that is adapted to the national and market-level context of particular LMICs. The implication is that it is not possible to apply standard or single interventions across countries, as approaches proven to work well in one context will not necessarily work well elsewhere.

Cloud Computing Law

CERN Document Server

Millard, Christopher

2013-01-01

This book is about the legal implications of cloud computing. In essence, ‘the cloud’ is a way of delivering computing resources as a utility service via the internet. It is evolving very rapidly with substantial investments being made in infrastructure, platforms and applications, all delivered ‘as a service’. The demand for cloud resources is enormous, driven by such developments as the deployment on a vast scale of mobile apps and the rapid emergence of ‘Big Data’. Part I of this book explains what cloud computing is and how it works. Part II analyses contractual relationships between cloud service providers and their customers, as well as the complex roles of intermediaries. Drawing on primary research conducted by the Cloud Legal Project at Queen Mary University of London, cloud contracts are analysed in detail, including the appropriateness and enforceability of ‘take it or leave it’ terms of service, as well as the scope for negotiating cloud deals. Specific arrangements for public sect...

ADVANCEMENT OF RAPID PROTOTYPING IN AEROSPACE INDUSTRY -A REVIEW

OpenAIRE

Vineet Kumar Vashishtha,; Rahul Makade,; Neeraj Mehla

2011-01-01

Rapid prototyping technology have emerged a new innovation to reduced the time cost of moulds fabrication by creating 3D product directly from computer aided design thus the designer is able to perform design validation and accuracy analysis easily in a virtual environment as if using a physical model. The primary aim of this paper is to give the reader an overview of the current state of the art in rapid prototyping technology .The paper also deal with feature’s of rapid prototyping in Aeros...

Logic computation in phase change materials by threshold and memory switching.

Science.gov (United States)

Cassinerio, M; Ciocchini, N; Ielmini, D

2013-11-06

Memristors, namely hysteretic devices capable of changing their resistance in response to applied electrical stimuli, may provide new opportunities for future memory and computation, thanks to their scalable size, low switching energy and nonvolatile nature. We have developed a functionally complete set of logic functions including NOR, NAND and NOT gates, each utilizing a single phase-change memristor (PCM) where resistance switching is due to the phase transformation of an active chalcogenide material. The logic operations are enabled by the high functionality of nanoscale phase change, featuring voltage comparison, additive crystallization and pulse-induced amorphization. The nonvolatile nature of memristive states provides the basis for developing reconfigurable hybrid logic/memory circuits featuring low-power and high-speed switching. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Histogram analysis for age change of human lung with computed tomography

International Nuclear Information System (INIS)

Shirabe, Ichiju

1990-01-01

In order to evaluate physiological changes of normal lung with aging by computed tomography (CT), the peak position (PP) and full width half maximum (FWHM) of CT-histogram were studied in 77 normal human lung. Above 30 years old, PP tended to be seen in the lower attenuation value with advancing ages, with the result that the follow equation was obtained. CT attenuation value of PP=-0.87 x age -815. The peak position shifted to the range of higher CT attenuation in 30's. FWHM did not change with advancing ages. There were no differences of peak value and FWHM among the upper, middle and lower lung field. In this study, physiological changes of lung were evaluated quantitatively. Furthermore, this study was considered to be useful for diagnosis and treatment in lung diseases. (author)

Are plant species able to keep pace with the rapidly changing climate?

Directory of Open Access Journals (Sweden)

Sarah Cunze

Full Text Available Future climate change is predicted to advance faster than the postglacial warming. Migration may therefore become a key driver for future development of biodiversity and ecosystem functioning. For 140 European plant species we computed past range shifts since the last glacial maximum and future range shifts for a variety of Intergovernmental Panel on Climate Change (IPCC scenarios and global circulation models (GCMs. Range shift rates were estimated by means of species distribution modelling (SDM. With process-based seed dispersal models we estimated species-specific migration rates for 27 dispersal modes addressing dispersal by wind (anemochory for different wind conditions, as well as dispersal by mammals (dispersal on animal's coat - epizoochory and dispersal by animals after feeding and digestion - endozoochory considering different animal species. Our process-based modelled migration rates generally exceeded the postglacial range shift rates indicating that the process-based models we used are capable of predicting migration rates that are in accordance with realized past migration. For most of the considered species, the modelled migration rates were considerably lower than the expected future climate change induced range shift rates. This implies that most plant species will not entirely be able to follow future climate-change-induced range shifts due to dispersal limitation. Animals with large day- and home-ranges are highly important for achieving high migration rates for many plant species, whereas anemochory is relevant for only few species.

Rotation, Reflection, and Frame Changes; Orthogonal tensors in computational engineering mechanics

Science.gov (United States)

Brannon, R. M.

2018-04-01

Whilst vast literature is available for the most common rotation-related tasks such as coordinate changes, most reference books tend to cover one or two methods, and resources for less-common tasks are scarce. Specialized research applications can be found in disparate journal articles, but a self-contained comprehensive review that covers both elementary and advanced concepts in a manner comprehensible to engineers is rare. Rotation, Reflection, and Frame Changes surveys a refreshingly broad range of rotation-related research that is routinely needed in engineering practice. By illustrating key concepts in computer source code, this book stands out as an unusually accessible guide for engineers and scientists in engineering mechanics.

Ubiquitous Computing and Changing Pedagogical Possibilities: Representations, Conceptualizations and Uses of Knowledge

Science.gov (United States)

Swan, Karen; Van 'T Hooft, Mark; Kratcoski, Annette; Schenker, Jason

2007-01-01

This article reports on preliminary findings from an ongoing study of teaching and learning in a ubiquitous computing classroom. The research employed mixed methods and multiple measures to document changes in teaching and learning that result when teachers and students have access to a variety of digital devices wherever and whenever they need…

Spectroscopic sensitivity of real-time, rapidly induced phytochemical change in response to damage.

Science.gov (United States)

Couture, John J; Serbin, Shawn P; Townsend, Philip A

2013-04-01

An ecological consequence of plant-herbivore interactions is the phytochemical induction of defenses in response to insect damage. Here, we used reflectance spectroscopy to characterize the foliar induction profile of cardenolides in Asclepias syriaca in response to damage, tracked in vivo changes and examined the influence of multiple plant traits on cardenolide concentrations. Foliar cardenolide concentrations were measured at specific time points following damage to capture their induction profile. Partial least-squares regression (PLSR) modeling was employed to calibrate cardenolide concentrations to reflectance spectroscopy. In addition, subsets of plants were either repeatedly sampled to track in vivo changes or modified to reduce latex flow to damaged areas. Cardenolide concentrations and the induction profile of A. syriaca were well predicted using models derived from reflectance spectroscopy, and this held true for repeatedly sampled plants. Correlations between cardenolides and other foliar-related variables were weak or not significant. Plant modification for latex reduction inhibited an induced cardenolide response. Our findings show that reflectance spectroscopy can characterize rapid phytochemical changes in vivo. We used reflectance spectroscopy to identify the mechanisms behind the production of plant secondary metabolites, simultaneously characterizing multiple foliar constituents. In this case, cardenolide induction appears to be largely driven by enhanced latex delivery to leaves following damage. © 2013 The Authors. New Phytologist © 2013 New Phytologist Trust.

Evolving Pedagogical Perceptions of Teachers Integrating Ubiquitous Computing in Their Classrooms: A Case Study of the South Dakota Laptop Program

Science.gov (United States)

Pogany, Wade S.

2009-01-01

With technology changing the world at a rapid rate, the impact of ubiquitous computing in the classroom has had an influence on education. As the number of one-to-one laptop initiatives grows, the need for further research on the effects of teaching and learning also increases. This case study sought to examine changes in teaching that resulted…

Evaluation of RAPID for a UNF cask benchmark problem

Science.gov (United States)

Mascolino, Valerio; Haghighat, Alireza; Roskoff, Nathan J.

2017-09-01

This paper examines the accuracy and performance of the RAPID (Real-time Analysis for Particle transport and In-situ Detection) code system for the simulation of a used nuclear fuel (UNF) cask. RAPID is capable of determining eigenvalue, subcritical multiplication, and pin-wise, axially-dependent fission density throughout a UNF cask. We study the source convergence based on the analysis of the different parameters used in an eigenvalue calculation in the MCNP Monte Carlo code. For this study, we consider a single assembly surrounded by absorbing plates with reflective boundary conditions. Based on the best combination of eigenvalue parameters, a reference MCNP solution for the single assembly is obtained. RAPID results are in excellent agreement with the reference MCNP solutions, while requiring significantly less computation time (i.e., minutes vs. days). A similar set of eigenvalue parameters is used to obtain a reference MCNP solution for the whole UNF cask. Because of time limitation, the MCNP results near the cask boundaries have significant uncertainties. Except for these, the RAPID results are in excellent agreement with the MCNP predictions, and its computation time is significantly lower, 35 second on 1 core versus 9.5 days on 16 cores.

Net Ecosystem Exchange of CO2 with Rapidly Changing High Arctic Landscapes

Science.gov (United States)

Emmerton, C. A.

2015-12-01

High Arctic landscapes are expansive and changing rapidly. However our understanding of their functional responses and potential to mitigate or enhance anthropogenic climate change is limited by few measurements. We collected eddy covariance measurements to quantify the net ecosystem exchange (NEE) of CO2 with polar semidesert and meadow wetland landscapes at the highest-latitude location measured to date (82°N). We coupled these rare data with ground and satellite vegetation production measurements (Normalized Difference Vegetation Index; NDVI) to evaluate the effectiveness of upscaling local to regional NEE. During the growing season, the dry polar semidesert landscape was a near zero sink of atmospheric CO2 (NEE: -0.3±13.5 g C m-2). A nearby meadow wetland accumulated over two magnitudes more carbon (NEE: -79.3±20.0 g C m-2) than the polar semidesert landscape, and was similar to meadow wetland NEE at much more southern latitudes. Polar semidesert NEE was most influenced by moisture, with wetter surface soils resulting in greater soil respiration and CO2 emissions. At the meadow wetland, soil heating enhanced plant growth, which in turn increased CO2 uptake. Our upscaling assessment found that polar semidesert NDVI measured on site was low (mean: 0.120-0.157) and similar to satellite measurements (mean: 0.155-0.163). However, weak plant growth resulted in poor satellite NDVI-NEE relationships and created challenges for remotely-detecting changes in the cycling of carbon on the polar semidesert landscape. The meadow wetland appeared more suitable to assess plant production and NEE via remote-sensing, however high Arctic wetland extent is constrained by topography to small areas that may be difficult to resolve with large satellite pixels. We predict that until summer precipitation and humidity increases substantially, climate-related changes of dry high Arctic landscapes may be restricted by poor soil moisture retention, and therefore have some inertia against

Cumulative effects of rapid climate and land-use changes on the Yamal Peninsula, Russia

Science.gov (United States)

Walker, D. A.; Leibman, M. O.; Forbes, B. C.; Epstein, H. E.

2008-12-01

Our principal goal is to develop better, more far-looking tools to predict the cumulative effects of resource development, climate-change, and traditional land use. Here we use remote sensing, climate-change analyses, socio-economic analyses, and vegetation-change models to examine the cumulative effects of climate change, gas development, and reindeer herding on the Yamal Peninsula in northwest Siberia as part of the Northern Eurasia Earth Science Partnership Initiative (NEESPI). We find: 1. Direct (planned) impacts of industrial activities on the Yamal Peninsula are currently local and limited in extent, but this is changing rapidly as extensive gas fields are developed and land and sea transportation corridors are developed to get the gas to market. Indirect impacts of the development at Bovanenkovo, the largest gas field, exceed the direct impacts by a factor of three, and the total area of influence of the development on the reindeer pasturelands (e.g., area where migration routes and access to pasturelands is affected) exceeds the direct impacts by a factor of about 40. 2. The trend in land-surface temperatures has co-varied with the trend in sea-ice. Low sea ice in the preceding December-March period is correlated to warmer land temperature the following summer. The sea- ice trends in the Kara Sea-Yamal region are tied to variation in the North Atlantic Oscillation index. 4. Only a small greening response to warming has been detected on the Yamal in comparison with some other areas in the Arctic (e.g. Northern Alaska). The actual effects of climate-change on vegetation are currently hard to document at the ground level because of lack of baseline and long-term ground observations and difficulty of excluding reindeer in these studies. 5. There is high potential for extensive landscape effects due to unstable sandy soils, and extremely ice-rich permafrost near the surface on slopes. 6. Two different vegetation modeling approaches are being used to predict

Selected physical, biological and biogeochemical implications of a rapidly changing Arctic Marginal Ice Zone

Science.gov (United States)

Barber, David G.; Hop, Haakon; Mundy, Christopher J.; Else, Brent; Dmitrenko, Igor A.; Tremblay, Jean-Eric; Ehn, Jens K.; Assmy, Philipp; Daase, Malin; Candlish, Lauren M.; Rysgaard, Søren

2015-12-01

The Marginal Ice Zone (MIZ) of the Arctic Ocean is changing rapidly due to a warming Arctic climate with commensurate reductions in sea ice extent and thickness. This Pan-Arctic review summarizes the main changes in the Arctic ocean-sea ice-atmosphere (OSA) interface, with implications for primary- and secondary producers in the ice and the underlying water column. Changes in the Arctic MIZ were interpreted for the period 1979-2010, based on best-fit regressions for each month. Trends of increasingly open water were statistically significant for each month, with quadratic fit for August-November, illustrating particularly strong seasonal feedbacks in sea-ice formation and decay. Geographic interpretations of physical and biological changes were based on comparison of regions with significant changes in sea ice: (1) The Pacific Sector of the Arctic Ocean including the Canada Basin and the Beaufort, Chukchi and East Siberian seas; (2) The Canadian Arctic Archipelago; (3) Baffin Bay and Hudson Bay; and (4) the Barents and Kara seas. Changes in ice conditions in the Barents sea/Kara sea region appear to be primarily forced by ocean heat fluxes during winter, whereas changes in the other sectors appear to be more summer-autumn related and primarily atmospherically forced. Effects of seasonal and regional changes in OSA-system with regard to increased open water were summarized for photosynthetically available radiation, nutrient delivery to the euphotic zone, primary production of ice algae and phytoplankton, ice-associated fauna and zooplankton, and gas exchange of CO2. Changes in the physical factors varied amongst regions, and showed direct effects on organisms linked to sea ice. Zooplankton species appear to be more flexible and likely able to adapt to variability in the onset of primary production. The major changes identified for the ice-associated ecosystem are with regard to production timing and abundance or biomass of ice flora and fauna, which are related to

A decade of rapid change: Biocultural influences on child growth in highland Peru.

Science.gov (United States)

Oths, Kathryn S; Smith, Hannah N; Stein, Max J; Lazo Landivar, Rodrigo J

2018-03-01

In the past decade many areas of Peru have been undergoing extreme environmental, economic, and cultural change. In the highland hamlet of Chugurpampa, La Libertad, climate change has ruined harvests and led to frequent periods of migration to the coast in search of livelihood. This biocultural research examines how the changes could be affecting the growth of children who maintain residence in the highlands. Clinical records from the early 2000s were compared to those from the early 2010s. Charts were randomly selected to record anthropometric data, netting a sample of 75 children ages 0-60 months of age. Analysis of covariance was run to compare mean stature, weight, and BMI between cohorts. Percentage of children who fall below the -2 threshold for z-scores for height and weight were compared by age and cohort. A significant secular trend in growth was found, with children born more recently larger than those born a decade before. The effect is most notable in the first year of life, with the growth advantage attenuated by the age of 3 for height and age 4 for weight. While children were unlikely to be stunted from 0 to 3 years of age, 44% of the later cohort were stunted and 11% were underweight from 4 to 5 years of age. Three possible explanations for the rapid shift are entertained: more time spent on the coast during gestation and early childhood, which may attenuate the effect of hypoxia on child growth; dietary change; and increased use of biomedicine. © 2017 Wiley Periodicals, Inc.

Evidence-based ergonomics education: Promoting risk factor awareness among office computer workers.

Science.gov (United States)

Mani, Karthik; Provident, Ingrid; Eckel, Emily

2016-01-01

Work-related musculoskeletal disorders (WMSDs) related to computer work have become a serious public health concern. Literature revealed a positive association between computer use and WMSDs. The purpose of this evidence-based pilot project was to provide a series of evidence-based educational sessions on ergonomics to office computer workers to enhance the awareness of risk factors of WMSDs. Seventeen office computer workers who work for the National Board of Certification in Occupational Therapy volunteered for this project. Each participant completed a baseline and post-intervention ergonomics questionnaire and attended six educational sessions. The Rapid Office Strain Assessment and an ergonomics questionnaire were used for data collection. The post-intervention data revealed that 89% of participants were able to identify a greater number of risk factors and answer more questions correctly in knowledge tests of the ergonomics questionnaire. Pre- and post-intervention comparisons showed changes in work posture and behaviors (taking rest breaks, participating in exercise, adjusting workstation) of participants. The findings have implications for injury prevention in office settings and suggest that ergonomics education may yield positive knowledge and behavioral changes among computer workers.

Rapid estimation of the vertebral body volume: a combination of the Cavalieri principle and computed tomography images

International Nuclear Information System (INIS)

Odaci, Ersan; Sahin, Buenyamin; Sonmez, Osman Fikret; Kaplan, Sueleyman; Bas, Orhan; Bilgic, Sait; Bek, Yueksel; Erguer, Hayati

2003-01-01

Objective: The exact volume of the vertebral body is necessary for the evaluation, treatment and surgical application of related vertebral body. Thereby, the volume changes of the vertebral body are monitored, such as infectious diseases of vertebra and traumatic or non-traumatic fractures and deformities of the spine. Several studies have been conducted for the assessment of the vertebral body size based on the evaluation of the different criteria of the spine using different techniques. However, we have not found any detailed study in the literature describing the combination of the Cavalieri principle and vertebral body volume estimation. Materials and methods: In the present study we describe a rapid, simple, accurate and practical technique for estimating the volume of vertebral body. Two specimens were taken from the cadavers including ten lumbar vertebras and were scanned in axial, sagittal and coronal section planes by a computed tomography (CT) machine. The consecutive sections in 5 and 3 mm thicknesses were used to estimate the total volume of the vertebral bodies by means of the Cavalieri principle. Furthermore, to evaluate inter-observer differences the volume estimations were carried out by three performers. Results: There were no significant differences between the performers' estimates and real volumes of the vertebral bodies (P>0.05) and also between the performers' volume estimates (P>0.05). The section thickness and the section plains did not affect the accuracy of the estimates (P>0.05). A high correlation was seen between the estimates of performers and the real volumes of the vertebral bodies (r=0.881). Conclusion: We concluded that the combination of CT scanning with the Cavalieri principle is a direct and accurate technique that can be safely applied to estimate the volume of the vertebral body with the mean of 5 min and 11 s workload per vertebra

JINR rapid communications

International Nuclear Information System (INIS)

1998-01-01

The present collection of rapid communications from JINR, Dubna, contains seven separate records on invisible Z-boson width and restrictions on next-to-minimal supersymmetric standard model, cosmic test of honeycomb drift chambers, fission of 209 Bi, 232 Th, 235 U, 238 U and 237 Np in a spallation neutron field, rapid screening of spontaneous and radiation-induced structural changes at the vestigial gene of Drosophila melanogaster by polymerase chain reaction, gamma-ray multiplicities in sub-barrier fission of 226 Th and the decay constants of the scalar and pseudoscalar mesons in the quark models with quasilocal interaction

Toward a mechanistic understanding of human-induced rapid environmental change: A case study linking energy development, avian nest predation, and predators

Science.gov (United States)

Hethcoat, Matthew G.; Chalfoun, Anna D.

2015-01-01

Demographic consequences of human-induced rapid environmental change (HIREC) have been widely documented for many populations. The mechanisms underlying such patterns, however, are rarely investigated and yet are critical to understand for effective conservation and management.

Extreme Temperature Exceedances Change more Rapidly Under Future Warming in Regions of non-Gaussian Short Temperature Distribution Tails

Science.gov (United States)

Loikith, P. C.; Neelin, J. D.; Meyerson, J.

2017-12-01

Regions of shorter-than-Gaussian warm and cold side temperature distribution tails are shown to occur in spatially coherent patterns in the current climate. Under such conditions, warming may be manifested in more complex ways than if the underlying distribution were close to Gaussian. For example, under a uniform warm shift, the simplest prototype for future warming, a location with a short warm side tail would experience a greater increase in extreme warm exceedances compared to if the distribution were Gaussian. Similarly, for a location with a short cold side tail, a uniform warm shift would result in a rapid decrease in extreme cold exceedances. Both scenarios carry major societal and environmental implications including but not limited to negative impacts on human and ecosystem health, agriculture, and the economy. It is therefore important for climate models to be able to realistically reproduce short tails in simulations of historical climate in order to boost confidence in projections of future temperature extremes. Overall, climate models contributing to the fifth phase of the Coupled Model Intercomparison Project capture many of the principal observed regions of short tails. This suggests the underlying dynamics and physics occur on scales resolved by the models, and helps build confidence in model projections of extremes. Furthermore, most GCMs show more rapid changes in exceedances of extreme temperature thresholds in regions of short tails. Results therefore suggest that the shape of the tails of the underlying temperature distribution is an indicator of how rapidly a location will experience changes to extreme temperature occurrence under future warming.

Serial changes of coronary atherosclerotic plaque: Assessment with 64-slice multi-detector computed tomography

Energy Technology Data Exchange (ETDEWEB)

Kim, Eun Young; Kang, Doo Kyoung; Sun, Joo Sung; Choi, So Yeon [Ajou University School of Medicine, Suwon (Korea, Republic of)

2013-12-15

Evaluate the progression of coronary atherosclerotic plaque during follow-up, and its association with cardiovascular risk factors. Fifty-six atherosclerotic patients with plaque were enrolled in this retrospective study. Patient's plaque was detected on repeat 64-slice multidetector CT scans with a mean interval of 25 ± 10 months changes in calcified and non-calcified plaque volumes and cardiovascular risk factors were assessed over time. Absolute and relative changes in plaque volume were compared, and the association between rapid progression and cardiovascular risk factors was determined. Diameter of the stenosis, length, calcified and non-calcified lesion plaque volumes increased significantly on follow-up CT. Absolute and relative annual changes in plaque volumes were significantly greater in non-calcified plaque (median, 22.7 mm{sup 3}, 90.4%) than in calcified plaque (median, 0.7 mm{sup 3}, 0%). Obesity, smoking, hypertension, hypercholesterolemia, and low high-density lipoprotein were significant predictors of progression of non-calcified plaque. Progression of calcified plaque was not associated with any cardiovascular risk factors. Coronary plaque volume increased significantly on follow-up CT. The rate of progression is related to non-calcified plaque than to calcified plaque. Cardiovascular risk factors are independently associated with the rapid progression of non-calcified plaque volume, but not associated with the progression of calcified plaque.

A big data management platform for rapidly changing environments

NARCIS (Netherlands)

Zahedi, P.

2014-01-01

Big data is now a reality. Storing, managing, and analyzing very large amount of data is a common challenge in the world of technology where digital content is rapidly growing. In recent years, FEI advanced electron microscopes, with their unsurpassed magnification and resolving power brought an

The use of contrast media in computer tomography

International Nuclear Information System (INIS)

Galanski, M.; Cramer, B.M.; Drewes, G.

1980-01-01

There are a variety of applications for contrast media in CT. They can be used for better anatomic demonstration or for showing pathological processes. Nearly all available contrast media may be found useful. Intravenously injected renographic contrast media are most commonly employed. In addition to their inherent contrast, specific pharmaco-kinetic changes may be of diagnostic value. This adds some knowledge of function to the purely morphological information obtained by computer tomography. For this purpose, contrast has to be injected rapidly and a fast scanner must be used (so-called angio-CT). (orig.) [de

Laser Doppler imaging of cutaneous blood flow through transparent face masks: a necessary preamble to computer-controlled rapid prototyping fabrication with submillimeter precision.

Science.gov (United States)

Allely, Rebekah R; Van-Buendia, Lan B; Jeng, James C; White, Patricia; Wu, Jingshu; Niszczak, Jonathan; Jordan, Marion H

2008-01-01

A paradigm shift in management of postburn facial scarring is lurking "just beneath the waves" with the widespread availability of two recent technologies: precise three-dimensional scanning/digitizing of complex surfaces and computer-controlled rapid prototyping three-dimensional "printers". Laser Doppler imaging may be the sensible method to track the scar hyperemia that should form the basis of assessing progress and directing incremental changes in the digitized topographical face mask "prescription". The purpose of this study was to establish feasibility of detecting perfusion through transparent face masks using the Laser Doppler Imaging scanner. Laser Doppler images of perfusion were obtained at multiple facial regions on five uninjured staff members. Images were obtained without a mask, followed by images with a loose fitting mask with and without a silicone liner, and then with a tight fitting mask with and without a silicone liner. Right and left oblique images, in addition to the frontal images, were used to overcome unobtainable measurements at the extremes of face mask curvature. General linear model, mixed model, and t tests were used for data analysis. Three hundred seventy-five measurements were used for analysis, with a mean perfusion unit of 299 and pixel validity of 97%. The effect of face mask pressure with and without the silicone liner was readily quantified with significant changes in mean cutaneous blood flow (P face masks. Perfusion decreases with the application of pressure and with silicone. Every participant measured differently in perfusion units; however, consistent perfusion patterns in the face were observed.

Organizational Adaptation to the Rapidly Changing External Environment: A Case Study of Strategic Marketing at Notre Dame College in Ohio

Science.gov (United States)

Brown, Shawn M.

2012-01-01

This thesis examined the role of strategic marketing in organizational adaptation to a rapidly changing and competitive external environment among institutions of higher education. Colleges and universities adapt to external pressures as open systems operating within a broader external environment (Bess & Dee, 2008; Keller, 1983). How does…

Rapid Modulation of Aromatase Activity in the Vertebrate Brain

Directory of Open Access Journals (Sweden)

Thierry D. Charlier

2013-01-01

Full Text Available Numerous steroid hormones, including 17β-estradiol (E2, activate rapid and transient cellular, physiological, and behavioral changes in addition to their well-described genomic effects. Aromatase is the key-limiting enzyme in the production of estrogens, and the rapid modulation of this enzymatic activity could produce rapid changes in local E2 concentrations. The mechanisms that might mediate such rapid enzymatic changes are not fully understood but are currently under intense scrutiny. Recent studies in our laboratory indicate that brain aromatase activity is rapidly inhibited by an increase in intracellular calcium concentration resulting from potassium-induced depolarization or from the activation of glutamatergic receptors. Phosphorylating conditions also reduce aromatase activity within minutes, and this inhibition is blocked by the addition of multiple protein kinase inhibitors. This rapid modulation of aromatase activity by phosphorylating conditions is a general mechanism observed in different cell types and tissues derived from a variety of species, including human aromatase expressed in various cell lines. Phosphorylation processes affect aromatase itself and do not involve changes in aromatase protein concentration. The control of aromatase activity by multiple kinases suggests that several amino acids must be concomitantly phosphorylated to modify enzymatic activity but site-directed mutagenesis of several amino acids alone or in combination has not to date revealed the identity of the targeted residue(s. Altogether, the phosphorylation processes affecting aromatase activity provide a new general mechanism by which the concentration of estrogens can be rapidly altered in the brain.

Rapid Land Cover Map Updates Using Change Detection and Robust Random Forest Classifiers

Directory of Open Access Journals (Sweden)

Konrad J. Wessels

2016-10-01

Full Text Available The paper evaluated the Landsat Automated Land Cover Update Mapping (LALCUM system designed to rapidly update a land cover map to a desired nominal year using a pre-existing reference land cover map. The system uses the Iteratively Reweighted Multivariate Alteration Detection (IRMAD to identify areas of change and no change. The system then automatically generates large amounts of training samples (n > 1 million in the no-change areas as input to an optimized Random Forest classifier. Experiments were conducted in the KwaZulu-Natal Province of South Africa using a reference land cover map from 2008, a change mask between 2008 and 2011 and Landsat ETM+ data for 2011. The entire system took 9.5 h to process. We expected that the use of the change mask would improve classification accuracy by reducing the number of mislabeled training data caused by land cover change between 2008 and 2011. However, this was not the case due to exceptional robustness of Random Forest classifier to mislabeled training samples. The system achieved an overall accuracy of 65%–67% using 22 detailed classes and 72%–74% using 12 aggregated national classes. “Water”, “Plantations”, “Plantations—clearfelled”, “Orchards—trees”, “Sugarcane”, “Built-up/dense settlement”, “Cultivation—Irrigated” and “Forest (indigenous” had user’s accuracies above 70%. Other detailed classes (e.g., “Low density settlements”, “Mines and Quarries”, and “Cultivation, subsistence, drylands” which are required for operational, provincial-scale land use planning and are usually mapped using manual image interpretation, could not be mapped using Landsat spectral data alone. However, the system was able to map the 12 national classes, at a sufficiently high level of accuracy for national scale land cover monitoring. This update approach and the highly automated, scalable LALCUM system can improve the efficiency and update rate of regional land

Rapid Aminoglycoside NP Test for Rapid Detection of Multiple Aminoglycoside Resistance in Enterobacteriaceae.

Science.gov (United States)

Nordmann, Patrice; Jayol, Aurélie; Dobias, Jan; Poirel, Laurent

2017-04-01

The rapid aminoglycoside NP (Nordmann/Poirel) test was developed to rapidly identify multiple aminoglycoside (AG) resistance in Enterobacteriaceae It is based on the detection of the glucose metabolism related to enterobacterial growth in the presence of a defined concentration of amikacin plus gentamicin. Formation of acid metabolites was evidenced by a color change (orange to yellow) of the red phenol pH indicator. The rapid aminoglycoside NP test was evaluated by using bacterial colonies of 18 AG-resistant isolates producing 16S rRNA methylases, 20 AG-resistant isolates expressing AG-modifying enzymes (acetyl-, adenyl-, and phosphotransferases), and 10 isolates susceptible to AG. Its sensitivity and specificity were 100% and 97%, respectively, compared to the broth dilution method, which was taken as the gold standard for determining aminoglycoside resistance. The test is inexpensive, rapid (<2 h), and implementable worldwide. Copyright © 2017 American Society for Microbiology.

Threshold and resilience management of coupled urbanization and water environmental system in the rapidly changing coastal region

International Nuclear Information System (INIS)

Li, Yangfan; Li, Yi; Wu, Wei

2016-01-01

The concept of thresholds shows important implications for environmental and resource management. Here we derived potential landscape thresholds which indicated abrupt changes in water quality or the dividing points between exceeding and failing to meet national surface water quality standards for a rapidly urbanizing city on the Eastern Coast in China. The analysis of landscape thresholds was based on regression models linking each of the seven water quality variables to each of the six landscape metrics for this coupled land-water system. We found substantial and accelerating urban sprawl at the suburban areas between 2000 and 2008, and detected significant nonlinear relations between water quality and landscape pattern. This research demonstrated that a simple modeling technique could provide insights on environmental thresholds to support more-informed decision making in land use, water environmental and resilience management. - Graphical abstract: Fig. Threshold models and resilience management for water quality. Display Omitted - Highlights: • Coupling urbanization and water environmental system. • Developing threshold models of the coupled land-water systems. • Nonlinear relations between water quality variables and landscape metrics. • Enhancing resilience management of coastal rapid urbanization. - We develop environmental threshold models and provide their implications on resilience management for a coupled land-water system with rapid urbanization.

Neolithisation of the Aegean and Southeast Europe during the 6600–6000 calBC period of Rapid Climate Change

Directory of Open Access Journals (Sweden)

Bernhard Weninger

2014-12-01

Full Text Available In extension of the recently established ‘Rapid Climate Change (RCC Neolithisation Model’ (Clare 2013, in the present paper we demonstrate the existence of a remarkable coincidence between the exact (decadel-scale entry and departure dates of the Neolithic into/from the Aegean (~6600/6050 calBC with begin/end of RCC-conditions.

Water Quality Changes during Rapid Urbanization in the Shenzhen River Catchment: An Integrated View of Socio-Economic and Infrastructure Development

Directory of Open Access Journals (Sweden)

Hua-peng Qin

2014-10-01

Full Text Available Surface water quality deterioration is a serious problem in many rapidly urbanizing catchments in developing countries. There is currently a lack of studies that quantify water quality variation (deterioration or otherwise due to both socio-economic and infrastructure development in a catchment. This paper investigates the causes of water quality changes over the rapid urbanization period of 1985–2009 in the Shenzhen River catchment, China and examines the changes in relation to infrastructure development and socio-economic policies. The results indicate that the water quality deteriorated rapidly during the earlier urbanization stages before gradually improving over recent years, and that rapid increases in domestic discharge were the major causes of water quality deterioration. Although construction of additional wastewater infrastructure can significantly improve water quality, it was unable to dispose all of the wastewater in the catchment. However, it was found that socio-economic measures can significantly improve water quality by decreasing pollutant load per gross regional production (GRP or increasing labor productivity. Our findings suggest that sustainable development during urbanization is possible, provided that: (1 the wastewater infrastructure should be constructed timely and revitalized regularly in line with urbanization, and wastewater treatment facilities should be upgraded to improve their nitrogen and phosphorus removal efficiencies; (2 administrative regulation policies, economic incentives and financial policies should be implemented to encourage industries to prevent or reduce the pollution at the source; (3 the environmental awareness and education level of local population should be increased; (4 planners from various sectors should consult each other and adapt an integrated planning approach for socio-economic and wastewater infrastructure development.

Polarization control of spontaneous emission for rapid quantum-state initialization

Science.gov (United States)

DiLoreto, C. S.; Rangan, C.

2017-04-01

We propose an efficient method to selectively enhance the spontaneous emission rate of a quantum system by changing the polarization of an incident control field, and exploiting the polarization dependence of the system's spontaneous emission rate. This differs from the usual Purcell enhancement of spontaneous emission rates as it can be selectively turned on and off. Using a three-level Λ system in a quantum dot placed in between two silver nanoparticles and a linearly polarized, monochromatic driving field, we present a protocol for rapid quantum state initialization, while maintaining long coherence times for control operations. This process increases the overall amount of time that a quantum system can be effectively utilized for quantum operations, and presents a key advance in quantum computing.

Evaluation of RAPID for a UNF cask benchmark problem

Directory of Open Access Journals (Sweden)

Mascolino Valerio

2017-01-01

Full Text Available This paper examines the accuracy and performance of the RAPID (Real-time Analysis for Particle transport and In-situ Detection code system for the simulation of a used nuclear fuel (UNF cask. RAPID is capable of determining eigenvalue, subcritical multiplication, and pin-wise, axially-dependent fission density throughout a UNF cask. We study the source convergence based on the analysis of the different parameters used in an eigenvalue calculation in the MCNP Monte Carlo code. For this study, we consider a single assembly surrounded by absorbing plates with reflective boundary conditions. Based on the best combination of eigenvalue parameters, a reference MCNP solution for the single assembly is obtained. RAPID results are in excellent agreement with the reference MCNP solutions, while requiring significantly less computation time (i.e., minutes vs. days. A similar set of eigenvalue parameters is used to obtain a reference MCNP solution for the whole UNF cask. Because of time limitation, the MCNP results near the cask boundaries have significant uncertainties. Except for these, the RAPID results are in excellent agreement with the MCNP predictions, and its computation time is significantly lower, 35 second on 1 core versus 9.5 days on 16 cores.

Rapid and efficient radiosynthesis of [{sup 123}I]I-PK11195, a single photon emission computed tomography tracer for peripheral benzodiazepine receptors

Energy Technology Data Exchange (ETDEWEB)

Pimlott, Sally L. [Department of Clinical Physics, West of Scotland Radionuclide Dispensary, Western Infirmary, G11 6NT Glasgow (United Kingdom)], E-mail: s.pimlott@clinmed.gla.ac.uk; Stevenson, Louise [Department of Chemistry, WestCHEM, University of Glasgow, G12 8QQ Glasgow (United Kingdom); Wyper, David J. [Institute of Neurological Sciences, Southern General Hospital, G51 4TF Glasgow (United Kingdom); Sutherland, Andrew [Department of Chemistry, WestCHEM, University of Glasgow, G12 8QQ Glasgow (United Kingdom)

2008-07-15

Introduction: [{sup 123}I]I-PK11195 is a high-affinity single photon emission computed tomography radiotracer for peripheral benzodiazepine receptors that has previously been used to measure activated microglia and to assess neuroinflammation in the living human brain. This study investigates the radiosynthesis of [{sup 123}I]I-PK11195 in order to develop a rapid and efficient method that obtains [{sup 123}I]I-PK11195 with a high specific activity for in vivo animal and human imaging studies. Methods: The synthesis of [{sup 123}I]I-PK11195 was evaluated using a solid-state interhalogen exchange method and an electrophilic iododestannylation method, where bromine and trimethylstannyl derivatives were used as precursors, respectively. In the electrophilic iododestannylation method, the oxidants peracetic acid and chloramine-T were both investigated. Results: Electrophilic iododestannylation produced [{sup 123}I]I-PK11195 with a higher isolated radiochemical yield and a higher specific activity than achievable using the halogen exchange method investigated. Using chloramine-T as oxidant provided a rapid and efficient method of choice for the synthesis of [{sup 123}I]I-PK11195. Conclusions: [{sup 123}I]I-PK11195 has been successfully synthesized via a rapid and efficient electrophilic iododestannylation method, producing [{sup 123}I]I-PK11195 with a higher isolated radiochemical yield and a higher specific activity than previously achieved.

Biomes computed from simulated climatologies

Energy Technology Data Exchange (ETDEWEB)

Claussen, W.; Esch, M.

1992-09-01

The biome model of Prentice et al. is used to predict global patterns of potential natural plant formations, or biomes, from climatologies simulated by ECHAM, a model used for climate simulations at the Max-Planck-Institut fuer Meteorologie. This study is undertaken in order to show the advantage of this biome model in comprehensively diagnosing the performance of a climate model and assessing effects of past and future climate changes predicted by a climate model. Good overall agreement is found between global patterns of biomes computed from observed and simulated data of present climate. But there are also major discrepancies indicated by a difference in biomes in Australia, in the Kalahari Desert, and in the Middle West of North America. These discrepancies can be traced back to failures in simulated rain fall as well as summer or winter temperatures. Global patterns of biomes computed from an ice age simulation reveal that North America, Europe, and Siberia should have been covered largely by tundra and taiga, whereas only small differences are seen for the tropical rain forests. A potential North-East shift of biomes is expected from a simulation with enhanced CO{sub 2} concentration according to the IPCC Scenario A. Little change is seen in the tropical rain forest and the Sahara. Since the biome model used is not capable of predicting changes in vegetation patterns due to a rapid climate change, the latter simulation has to be taken as a prediction of changes in conditions favorable for the existence of certain biomes, not as a prediction of a future distribution of biomes. (orig.).

A BIOINFORMATIC STRATEGY TO RAPIDLY CHARACTERIZE CDNA LIBRARIES

Science.gov (United States)

A Bioinformatic Strategy to Rapidly Characterize cDNA LibrariesG. Charles Ostermeier1, David J. Dix2 and Stephen A. Krawetz1.1Departments of Obstetrics and Gynecology, Center for Molecular Medicine and Genetics, & Institute for Scientific Computing, Wayne State Univer...

Granular computing: perspectives and challenges.

Science.gov (United States)

Yao, JingTao; Vasilakos, Athanasios V; Pedrycz, Witold

2013-12-01

Granular computing, as a new and rapidly growing paradigm of information processing, has attracted many researchers and practitioners. Granular computing is an umbrella term to cover any theories, methodologies, techniques, and tools that make use of information granules in complex problem solving. The aim of this paper is to review foundations and schools of research and to elaborate on current developments in granular computing research. We first review some basic notions of granular computing. Classification and descriptions of various schools of research in granular computing are given. We also present and identify some research directions in granular computing.

Computer Training for Entrepreneurial Meteorologists.

Science.gov (United States)

Koval, Joseph P.; Young, George S.

2001-05-01

Computer applications of increasing diversity form a growing part of the undergraduate education of meteorologists in the early twenty-first century. The advent of the Internet economy, as well as a waning demand for traditional forecasters brought about by better numerical models and statistical forecasting techniques has greatly increased the need for operational and commercial meteorologists to acquire computer skills beyond the traditional techniques of numerical analysis and applied statistics. Specifically, students with the skills to develop data distribution products are in high demand in the private sector job market. Meeting these demands requires greater breadth, depth, and efficiency in computer instruction. The authors suggest that computer instruction for undergraduate meteorologists should include three key elements: a data distribution focus, emphasis on the techniques required to learn computer programming on an as-needed basis, and a project orientation to promote management skills and support student morale. In an exploration of this approach, the authors have reinvented the Applications of Computers to Meteorology course in the Department of Meteorology at The Pennsylvania State University to teach computer programming within the framework of an Internet product development cycle. Because the computer skills required for data distribution programming change rapidly, specific languages are valuable for only a limited time. A key goal of this course was therefore to help students learn how to retrain efficiently as technologies evolve. The crux of the course was a semester-long project during which students developed an Internet data distribution product. As project management skills are also important in the job market, the course teamed students in groups of four for this product development project. The success, failures, and lessons learned from this experiment are discussed and conclusions drawn concerning undergraduate instructional methods

Learning what to see in a changing world

Directory of Open Access Journals (Sweden)

Katharina eSchmack

2016-05-01

Full Text Available Visual perception is strongly shaped by expectations, but it is poorly understood how such perceptual expectations are learned in our dynamic sensory environment. Here, we applied a Bayesian framework to investigate whether perceptual expectations are continuously updated from different aspects of ongoing experience. In two experiments, human observers performed an associative learning task in which rapidly changing expectations about the appearance of ambiguous stimuli were induced. We found that perception of ambiguous stimuli was biased by both learned associations and previous perceptual outcomes. Computational modelling revealed that perception was best explained by amodel that continuously updated priors from associative learning and perceptual history and combined these priors with the current sensory information in a probabilistic manner. Our findings suggest that the construction of visual perception is a highly dynamic process that incorporates rapidly changing expectations from different sources in a manner consistent with Bayesian learning and inference.

Web Based Rapid Mapping of Disaster Areas using Satellite Images, Web Processing Service, Web Mapping Service, Frequency Based Change Detection Algorithm and J-iView

Science.gov (United States)

Bandibas, J. C.; Takarada, S.

2013-12-01

Timely identification of areas affected by natural disasters is very important for a successful rescue and effective emergency relief efforts. This research focuses on the development of a cost effective and efficient system of identifying areas affected by natural disasters, and the efficient distribution of the information. The developed system is composed of 3 modules which are the Web Processing Service (WPS), Web Map Service (WMS) and the user interface provided by J-iView (fig. 1). WPS is an online system that provides computation, storage and data access services. In this study, the WPS module provides online access of the software implementing the developed frequency based change detection algorithm for the identification of areas affected by natural disasters. It also sends requests to WMS servers to get the remotely sensed data to be used in the computation. WMS is a standard protocol that provides a simple HTTP interface for requesting geo-registered map images from one or more geospatial databases. In this research, the WMS component provides remote access of the satellite images which are used as inputs for land cover change detection. The user interface in this system is provided by J-iView, which is an online mapping system developed at the Geological Survey of Japan (GSJ). The 3 modules are seamlessly integrated into a single package using J-iView, which could rapidly generate a map of disaster areas that is instantaneously viewable online. The developed system was tested using ASTER images covering the areas damaged by the March 11, 2011 tsunami in northeastern Japan. The developed system efficiently generated a map showing areas devastated by the tsunami. Based on the initial results of the study, the developed system proved to be a useful tool for emergency workers to quickly identify areas affected by natural disasters.

Stable numerical method in computation of stellar evolution

International Nuclear Information System (INIS)

Sugimoto, Daiichiro; Eriguchi, Yoshiharu; Nomoto, Ken-ichi.

1982-01-01

To compute the stellar structure and evolution in different stages, such as (1) red-giant stars in which the density and density gradient change over quite wide ranges, (2) rapid evolution with neutrino loss or unstable nuclear flashes, (3) hydrodynamical stages of star formation or supernova explosion, (4) transition phases from quasi-static to dynamical evolutions, (5) mass-accreting or losing stars in binary-star systems, and (6) evolution of stellar core whose mass is increasing by shell burning or decreasing by penetration of convective envelope into the core, we face ''multi-timescale problems'' which can neither be treated by simple-minded explicit scheme nor implicit one. This problem has been resolved by three prescriptions; one by introducing the hybrid scheme suitable for the multi-timescale problems of quasi-static evolution with heat transport, another by introducing also the hybrid scheme suitable for the multi-timescale problems of hydrodynamic evolution, and the other by introducing the Eulerian or, in other words, the mass fraction coordinate for evolution with changing mass. When all of them are combined in a single computer code, we can compute numerically stably any phase of stellar evolution including transition phases, as far as the star is spherically symmetric. (author)

Computed tomographic analysis of deformity and dimensional changes in the eyeball

International Nuclear Information System (INIS)

Osborne, D.R.; Foulks, G.N.

1984-01-01

Computed tomography (CT) was performed in 40 patients with a confirmed ophthalmic diagnosis and a change in the dimensions or configuration of the eyeball. Abnormalities studied included coloboma, microphthalmus, buphthalmos, axial myopia, macrophthalmus, phthisis bulbi, trauma, neoplasm, posterior staphyloma, granuloma, pseudotumor, and surgicalscleral banding for retinal detachment. CT findings could be grouped into three categories depending upon whether the eye was small, large, or normal in size, with the findings in each group allowing distinction of most disease processes

The origins of computer weather prediction and climate modeling

International Nuclear Information System (INIS)

Lynch, Peter

2008-01-01

Numerical simulation of an ever-increasing range of geophysical phenomena is adding enormously to our understanding of complex processes in the Earth system. The consequences for mankind of ongoing climate change will be far-reaching. Earth System Models are capable of replicating climate regimes of past millennia and are the best means we have of predicting the future of our climate. The basic ideas of numerical forecasting and climate modeling were developed about a century ago, long before the first electronic computer was constructed. There were several major practical obstacles to be overcome before numerical prediction could be put into practice. A fuller understanding of atmospheric dynamics allowed the development of simplified systems of equations; regular radiosonde observations of the free atmosphere and, later, satellite data, provided the initial conditions; stable finite difference schemes were developed; and powerful electronic computers provided a practical means of carrying out the prodigious calculations required to predict the changes in the weather. Progress in weather forecasting and in climate modeling over the past 50 years has been dramatic. In this presentation, we will trace the history of computer forecasting through the ENIAC integrations to the present day. The useful range of deterministic prediction is increasing by about one day each decade, and our understanding of climate change is growing rapidly as Earth System Models of ever-increasing sophistication are developed

Opening up to Big Data: Computer-Assisted Analysis of Textual Data in Social Sciences

Directory of Open Access Journals (Sweden)

Gregor Wiedemann

2013-05-01

Full Text Available Two developments in computational text analysis may change the way qualitative data analysis in social sciences is performed: 1. the availability of digital text worth to investigate is growing rapidly, and 2. the improvement of algorithmic information extraction approaches, also called text mining, allows for further bridging the gap between qualitative and quantitative text analysis. The key factor hereby is the inclusion of context into computational linguistic models which extends conventional computational content analysis towards the extraction of meaning. To clarify methodological differences of various computer-assisted text analysis approaches the article suggests a typology from the perspective of a qualitative researcher. This typology shows compatibilities between manual qualitative data analysis methods and computational, rather quantitative approaches for large scale mixed method text analysis designs. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs1302231

Changes seen on computed tomography of the chest in mildly symptomatic adult patients with sickle cell disease

Energy Technology Data Exchange (ETDEWEB)

Alves, Ursula David; Lopes, Agnaldo Jose; Maioli, Maria Christina Paixao; Soares, Andrea Ribeiro; Melo, Pedro Lopes de; Mogami, Roberto, E-mail: agnaldolopes.uerj@gmail.com [Universidade do Estado do Rio de Janeiro (UERJ), Rio de Janeiro, RJ (Brazil)

2016-07-15

Objective: To describe and quantify the main changes seen on computed tomography of the chest in mildly symptomatic adult patients with sickle cell disease, as well as to evaluate the radiologist accuracy in determining the type of haemoglobinopathy. Materials and Methods: A prospective study involving 44 adult patients with sickle cell disease who underwent inspiration and expiration computed tomography of the chest. The frequency of tomography findings and the extent of involvement are reported. We also calculated radiologist accuracy in determining the type of haemoglobinopathy by analyzing the pulmonary alterations and morphology of the spleen. Results: The changes found on computed tomography scans, in descending order of frequency, were as follows: fibrotic opacities (81.8%); mosaic attenuation (56.8%); architectural distortion (31.8%); cardiomegaly (25.0%); lobar volume reduction (18.2%); and increased caliber of peripheral pulmonary arteries (9.1%). For most of the findings, the involvement was considered mild, five or fewer lung segments being affected. The accuracy in determining the type of haemoglobinopathy (HbSS group versus not HbSS group) was 72.7%. Conclusion: In adult patients with sickle cell disease, the main tomography findings reflect fibrotic changes. In addition, computed tomography can be helpful in differentiating among haemoglobinopathies. (author)

Changes seen on computed tomography of the chest in mildly symptomatic adult patients with sickle cell disease

International Nuclear Information System (INIS)

Alves, Ursula David; Lopes, Agnaldo Jose; Maioli, Maria Christina Paixao; Soares, Andrea Ribeiro; Melo, Pedro Lopes de; Mogami, Roberto

2016-01-01

Objective: To describe and quantify the main changes seen on computed tomography of the chest in mildly symptomatic adult patients with sickle cell disease, as well as to evaluate the radiologist accuracy in determining the type of haemoglobinopathy. Materials and Methods: A prospective study involving 44 adult patients with sickle cell disease who underwent inspiration and expiration computed tomography of the chest. The frequency of tomography findings and the extent of involvement are reported. We also calculated radiologist accuracy in determining the type of haemoglobinopathy by analyzing the pulmonary alterations and morphology of the spleen. Results: The changes found on computed tomography scans, in descending order of frequency, were as follows: fibrotic opacities (81.8%); mosaic attenuation (56.8%); architectural distortion (31.8%); cardiomegaly (25.0%); lobar volume reduction (18.2%); and increased caliber of peripheral pulmonary arteries (9.1%). For most of the findings, the involvement was considered mild, five or fewer lung segments being affected. The accuracy in determining the type of haemoglobinopathy (HbSS group versus not HbSS group) was 72.7%. Conclusion: In adult patients with sickle cell disease, the main tomography findings reflect fibrotic changes. In addition, computed tomography can be helpful in differentiating among haemoglobinopathies. (author)

Quantitative in vivo micro-computed tomography for assessment of age-dependent changes in murine whole-body composition

Directory of Open Access Journals (Sweden)

Kim L. Beaucage

2016-12-01

Full Text Available Micro-computed tomography (micro-CT is used routinely to quantify skeletal tissue mass in small animal models. Our goal was to evaluate repeated in vivo micro-CT imaging for monitoring whole-body composition in studies of growth and aging in mice. Male mice from 2 to 52 weeks of age were anesthetized and imaged using an eXplore Locus Ultra and/or eXplore speCZT scanner. Images were reconstructed into 3D volumes, signal-intensity thresholds were used to classify each voxel as adipose, lean or skeletal tissue, and tissue masses were calculated from known density values. Images revealed specific changes in tissue distribution with growth and aging. Quantification showed biphasic increases in total CT-derived body mass, lean and skeletal tissue masses, consisting of rapid increases to 8 weeks of age, followed by slow linear increases to 52 weeks. In contrast, bone mineral density increased rapidly to a stable plateau at ~14 weeks of age. On the other hand, adipose tissue mass increased continuously with age. A micro-CT-derived total mass was calculated for each mouse and compared with gravimetrically measured mass, which differed on average by <3%. Parameters were highly reproducible for mice of the same age, but variability increased slightly with age. There was also good agreement in parameters for the same group of mice scanned on the eXplore Locus Ultra and eXplore speCZT systems. This study provides reference values for normative comparisons; as well, it demonstrates the usefulness of in vivo single-energy micro-CT scans to quantify whole-body composition in high-throughput studies of growth and aging in mice. Keywords: Adipose tissue, Bone mineral content, Bone mineral density, Growth, Lean tissue, Skeletal tissue

Distributed Processing in Cloud Computing

OpenAIRE

Mavridis, Ilias; Karatza, Eleni

2016-01-01

Proceedings of the First PhD Symposium on Sustainable Ultrascale Computing Systems (NESUS PhD 2016) Timisoara, Romania. February 8-11, 2016. Cloud computing offers a wide range of resources and services through the Internet that can been used for various purposes. The rapid growth of cloud computing has exempted many companies and institutions from the burden of maintaining expensive hardware and software infrastructure. With characteristics like high scalability, availability ...

Tensile behavior change depending on the microstructure of a Fe-Cu alloy produced from rapidly solidified powder

International Nuclear Information System (INIS)

Kakisawa, Hideki; Minagawa, Kazumi; Halada, Kohmei

2003-01-01

The relationship between consolidating temperature and the tensile behavior of iron alloy produced from Fe-Cu rapidly solidified powder is investigated. Fe-Cu powder fabricated by high-pressure water atomization was consolidated by heavy rolling at 873-1273 K. Microstructural changes were observed and tensile behavior was examined. Tensile behavior varies as the consolidating temperature changes, and these temperature-dependent differences depend on the morphology of the microstructure on the order of micrometers. The sample consolidated at 873 K shows a good strength/elongation balance because the powder microstructure and primary powder boundaries are maintained. The samples consolidated at the higher temperatures have a microstructure of recrystallized grains, and these recrystallized samples show the conventional relationship between tensile behavior and grain size in ordinal bulk materials

Rapid serial visual presentation design for cognition

CERN Document Server

Spence, Robert

2013-01-01

A powerful new image presentation technique has evolved over the last twenty years, and its value demonstrated through its support of many and varied common tasks. Conceptually, Rapid Serial Visual Presentation (RSVP) is basically simple, exemplified in the physical world by the rapid riffling of the pages of a book in order to locate a known image. Advances in computation and graphics processing allow RSVP to be applied flexibly and effectively to a huge variety of common tasks such as window shopping, video fast-forward and rewind, TV channel selection and product browsing. At its heart is a

Census Cities experiment in urban change detection. [mapping of land use changes in San Francisco, Washington D.C., Phoenix, Tucson, Boston, New Haven, Cedar Rapids, and Pontiac

Science.gov (United States)

Wray, J. R. (Principal Investigator); Milazzo, V. A.

1974-01-01

The author has identified the following significant results. Mapping of 1970 and 1972 land use from high-flight photography has been completed for all test sites: San Francisco, Washington, Phoenix, Tucson, Boston, New Haven, Cedar Rapids, and Pontiac. Area analysis of 1970 and 1972 land use has been completed for each of the mandatory urban areas. All 44 sections of the 1970 land use maps of the San Francisco test site have been officially released through USGS Open File at 1:62,500. Five thousand copies of the Washington one-sheet color 1970 land use map, census tract map, and point line identification map are being printed by USGS Publication Division. ERTS-1 imagery for each of the eight test sites is being received and analyzed. Color infrared photo enlargements at 1:100,000 of ERTS-1 MSS images of Phoenix taken on October 16, 1972 and May 2, 1973 are being analyzed to determine to what level land use and land use changes can be identified and to what extent the ERTS-1 imagery can be used in updating the 1970 aircraft photo-derived land use data base. Work is proceeding on the analysis of ERTS-1 imagery by computer manipulation of ERTS-1 MSS data in digital format. ERTS-1 CCT maps at 1:24,000 are being analyzed for two dates over Washington and Phoenix. Anniversary tape sets have been received at Purdue LARS for some additional urban test sites.

Computer Algebra Recipes for Mathematical Physics

CERN Document Server

Enns, Richard H

2005-01-01

Over two hundred novel and innovative computer algebra worksheets or "recipes" will enable readers in engineering, physics, and mathematics to easily and rapidly solve and explore most problems they encounter in their mathematical physics studies. While the aim of this text is to illustrate applications, a brief synopsis of the fundamentals for each topic is presented, the topics being organized to correlate with those found in traditional mathematical physics texts. The recipes are presented in the form of stories and anecdotes, a pedagogical approach that makes a mathematically challenging subject easier and more fun to learn. Key features: * Uses the MAPLE computer algebra system to allow the reader to easily and quickly change the mathematical models and the parameters and then generate new answers * No prior knowledge of MAPLE is assumed; the relevant MAPLE commands are introduced on a need-to-know basis * All MAPLE commands are indexed for easy reference * A classroom-tested story/anecdote format is use...

Scientific Grand Challenges: Challenges in Climate Change Science and the Role of Computing at the Extreme Scale

Energy Technology Data Exchange (ETDEWEB)

Khaleel, Mohammad A.; Johnson, Gary M.; Washington, Warren M.

2009-07-02

The U.S. Department of Energy (DOE) Office of Biological and Environmental Research (BER) in partnership with the Office of Advanced Scientific Computing Research (ASCR) held a workshop on the challenges in climate change science and the role of computing at the extreme scale, November 6-7, 2008, in Bethesda, Maryland. At the workshop, participants identified the scientific challenges facing the field of climate science and outlined the research directions of highest priority that should be pursued to meet these challenges. Representatives from the national and international climate change research community as well as representatives from the high-performance computing community attended the workshop. This group represented a broad mix of expertise. Of the 99 participants, 6 were from international institutions. Before the workshop, each of the four panels prepared a white paper, which provided the starting place for the workshop discussions. These four panels of workshop attendees devoted to their efforts the following themes: Model Development and Integrated Assessment; Algorithms and Computational Environment; Decadal Predictability and Prediction; Data, Visualization, and Computing Productivity. The recommendations of the panels are summarized in the body of this report.

Patient-reported changes in communication after computer-based script training for aphasia.

Science.gov (United States)

Manheim, Larry M; Halper, Anita S; Cherney, Leora

2009-04-01

To evaluate changes in patient-reported communication difficulty after a home-based, computer-delivered intervention designed to improve conversational skills in adults with aphasia. Delayed treatment design with baseline, preintervention, postintervention, and follow-up observations. Outpatient rehabilitation. Twenty subjects with chronic aphasia. Sessions with the speech-language pathologist to develop personally relevant conversational scripts, followed by 9 weeks of intensive home practice using a computer program loaded on a laptop, and weekly monitoring visits with the speech-language pathologist. Communication Difficulty (CD) subscale of the Burden of Stroke Scale (BOSS). The intervention resulted in a statistically and clinically significant decrease of 6.79 points (P=.038) in the CD subscale of the BOSS during the intervention, maintained during the follow-up period. The findings of this study provide positive albeit preliminary and limited support for the use of a home-based, computer-delivered language intervention program for improving patient-reported communication outcomes in adults with chronic aphasia. Additional research will be required to examine the efficacy and effectiveness of this intervention.

Rapid Environmental Change Drives Increased Land Use by an Arctic Marine Predator.

Directory of Open Access Journals (Sweden)

Todd C Atwood

Full Text Available In the Arctic Ocean's southern Beaufort Sea (SB, the length of the sea ice melt season (i.e., period between the onset of sea ice break-up in summer and freeze-up in fall has increased substantially since the late 1990s. Historically, polar bears (Ursus maritimus of the SB have mostly remained on the sea ice year-round (except for those that came ashore to den, but recent changes in the extent and phenology of sea ice habitat have coincided with evidence that use of terrestrial habitat is increasing. We characterized the spatial behavior of polar bears spending summer and fall on land along Alaska's north coast to better understand the nexus between rapid environmental change and increased use of terrestrial habitat. We found that the percentage of radiocollared adult females from the SB subpopulation coming ashore has tripled over 15 years. Moreover, we detected trends of earlier arrival on shore, increased length of stay, and later departure back to sea ice, all of which were related to declines in the availability of sea ice habitat over the continental shelf and changes to sea ice phenology. Since the late 1990s, the mean duration of the open-water season in the SB increased by 36 days, and the mean length of stay on shore increased by 31 days. While on shore, the distribution of polar bears was influenced by the availability of scavenge subsidies in the form of subsistence-harvested bowhead whale (Balaena mysticetus remains aggregated at sites along the coast. The declining spatio-temporal availability of sea ice habitat and increased availability of human-provisioned resources are likely to result in increased use of land. Increased residency on land is cause for concern given that, while there, bears may be exposed to a greater array of risk factors including those associated with increased human activities.

Rapid changes in ice core gas records - Part 1: On the accuracy of methane synchronisation of ice cores

Science.gov (United States)

Köhler, P.

2010-08-01

Methane synchronisation is a concept to align ice core records during rapid climate changes of the Dansgaard/Oeschger (D/O) events onto a common age scale. However, atmospheric gases are recorded in ice cores with a log-normal-shaped age distribution probability density function, whose exact shape depends mainly on the accumulation rate on the drilling site. This age distribution effectively shifts the mid-transition points of rapid changes in CH4 measured in situ in ice by about 58% of the width of the age distribution with respect to the atmospheric signal. A minimum dating uncertainty, or artefact, in the CH4 synchronisation is therefore embedded in the concept itself, which was not accounted for in previous error estimates. This synchronisation artefact between Greenland and Antarctic ice cores is for GRIP and Byrd less than 40 years, well within the dating uncertainty of CH4, and therefore does not calls the overall concept of the bipolar seesaw into question. However, if the EPICA Dome C ice core is aligned via CH4 to NGRIP this synchronisation artefact is in the most recent unified ice core age scale (Lemieux-Dudon et al., 2010) for LGM climate conditions of the order of three centuries and might need consideration in future gas chronologies.

Changes in the etiology of valvular heart disease in the rapidly aging Korean population.

Science.gov (United States)

Jang, Shin Yi; Ju, Eun-Young; Seo, Su Ra; Choi, Ji Yeon; Park, Sung-Ji; Kim, Duk-Kyung; Park, Seung Woo

2014-06-15

The aim of this study is to assess the changes in the causes of valvular heart disease between 2006 and 2011 in Korea. Data were collected from the Korean National Health Insurance Service from 2006 through 2011. These data consisted of primary diagnoses related to valvular heart disease regardless of other conditions. Valvular heart disease included non-rheumatic mitral valve disorders, non-rheumatic aortic valve disorders, rheumatic mitral valve disorders, and rheumatic aortic valve disorders. Overall, the age-standardized cumulative prevalence of non-rheumatic valvular heart disease was 70.6 per 100,000 persons in 2006 and 110.3 in 2011. This represented an increase from 42.2 to 65.2 in women and from 28.4 to 45.1 in men. In particular, there was a greater increase in prevalence in patients aged 65 years or older compared with groups aged 20-44 years or 45-64 years for both genders. The age-standardized cumulative prevalence of rheumatic valve disease did not change dramatically between 2006 and 2011. The overall age-standardized cumulative prevalence of non-rheumatic valvular heart diseases increased between 2006 and 2011, especially in individuals older than 65 years. These changes should be considered in future designs of cardiovascular healthcare services in countries with a rapidly aging population. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Rapid scanning system for fuel drawers

International Nuclear Information System (INIS)

Caldwell, J.T.; Fehlau, P.E.; France, S.W.

1981-01-01

A nondestructive method for uniqely distinguishing among and quantifying the mass of individual fuel plates in situ in fuel drawers utilized in nuclear reactors is described. The method is both rapid and passive, eliminating the personnel hazard of the commonly used irradiation techniques which require that the analysis be performed in proximity to an intense neutron source such as a reactor. In the present technique, only normally decaying nuclei are observed. This allows the analysis to be performed anywhere. This feature, combined with rapid scanning of a given fuel drawer (in approximately 30 s), and the computer data analysis allows the processing of large numbers of fuel drawers efficiently in the event of a loss alert

Protean appearance of craniopharyngioma on computed tomography

International Nuclear Information System (INIS)

Danziger, A.; Price, H.I.

1979-01-01

Craniopharyngiomas present a diverse appearance on computed tomography. Histological diagnosis is not always possible, but computed tomography is of great assistance in the delineation of the tumour as well as of the degree of associated hydrocephalus. Computed tomography also enables rapid non-invasive follow-up after surgery or radiotherapy, or both

Heavy Lift Vehicle (HLV) Avionics Flight Computing Architecture Study

Science.gov (United States)

Hodson, Robert F.; Chen, Yuan; Morgan, Dwayne R.; Butler, A. Marc; Sdhuh, Joseph M.; Petelle, Jennifer K.; Gwaltney, David A.; Coe, Lisa D.; Koelbl, Terry G.; Nguyen, Hai D.

2011-01-01

A NASA multi-Center study team was assembled from LaRC, MSFC, KSC, JSC and WFF to examine potential flight computing architectures for a Heavy Lift Vehicle (HLV) to better understand avionics drivers. The study examined Design Reference Missions (DRMs) and vehicle requirements that could impact the vehicles avionics. The study considered multiple self-checking and voting architectural variants and examined reliability, fault-tolerance, mass, power, and redundancy management impacts. Furthermore, a goal of the study was to develop the skills and tools needed to rapidly assess additional architectures should requirements or assumptions change.

Conceiving Human Interaction by Visualising Depth Data of Head Pose Changes and Emotion Recognition via Facial Expressions

NARCIS (Netherlands)

Kalliatakis, Grigorios; Stergiou, A.G.; Vidakis, Nikolaos

2017-01-01

Affective computing in general and human activity and intention analysis in particular comprise a rapidly-growing field of research. Head pose and emotion changes present serious challenges when applied to player’s training and ludology experience in serious games, or analysis of customer

Rapidity correlations test stochastic hydrodynamics

International Nuclear Information System (INIS)

Zin, C; Gavin, S; Moschelli, G

2017-01-01

We show that measurements of the rapidity dependence of transverse momentum correlations can be used to determine the characteristic time τ π that dictates the rate of isotropization of the stress energy tensor, as well as the shear viscosity ν = η/sT . We formulate methods for computing these correlations using second order dissipative hydrodynamics with noise. Current data are consistent with τ π /ν ∼ 10 but targeted measurements can improve this precision. (paper)

Computational materials design

International Nuclear Information System (INIS)

Snyder, R.L.

1999-01-01

Full text: Trial and error experimentation is an extremely expensive route to the development of new materials. The coming age of reduced defense funding will dramatically alter the way in which advanced materials have developed. In the absence of large funding we must concentrate on reducing the time and expense that the R and D of a new material consumes. This may be accomplished through the development of computational materials science. Materials are selected today by comparing the technical requirements to the materials databases. When existing materials cannot meet the requirements we explore new systems to develop a new material using experimental databases like the PDF. After proof of concept, the scaling of the new material to manufacture requires evaluating millions of parameter combinations to optimize the performance of the new device. Historically this process takes 10 to 20 years and requires hundreds of millions of dollars. The development of a focused set of computational tools to predict the final properties of new materials will permit the exploration of new materials systems with only a limited amount of materials characterization. However, to bound computational extrapolations, the experimental formulations and characterization will need to be tightly coupled to the computational tasks. The required experimental data must be obtained by dynamic, in-situ, very rapid characterization. Finally, to evaluate the optimization matrix required to manufacture the new material, very rapid in situ analysis techniques will be essential to intelligently monitor and optimize the formation of a desired microstructure. Techniques and examples for the rapid real-time application of XRPD and optical microscopy will be shown. Recent developments in the cross linking of the world's structural and diffraction databases will be presented as the basis for the future Total Pattern Analysis by XRPD. Copyright (1999) Australian X-ray Analytical Association Inc

DNA microarray unravels rapid changes in transcriptome of MK-801 treated rat brain

Science.gov (United States)

Kobayashi, Yuka; Kulikova, Sofya P; Shibato, Junko; Rakwal, Randeep; Satoh, Hiroyuki; Pinault, Didier; Masuo, Yoshinori

2015-01-01

AIM: To investigate the impact of MK-801 on gene expression patterns genome wide in rat brain regions. METHODS: Rats were treated with an intraperitoneal injection of MK-801 [0.08 (low-dose) and 0.16 (high-dose) mg/kg] or NaCl (vehicle control). In a first series of experiment, the frontoparietal electrocorticogram was recorded 15 min before and 60 min after injection. In a second series of experiments, the whole brain of each animal was rapidly removed at 40 min post-injection, and different regions were separated: amygdala, cerebral cortex, hippocampus, hypothalamus, midbrain and ventral striatum on ice followed by DNA microarray (4 × 44 K whole rat genome chip) analysis. RESULTS: Spectral analysis revealed that a single systemic injection of MK-801 significantly and selectively augmented the power of baseline gamma frequency (30-80 Hz) oscillations in the frontoparietal electroencephalogram. DNA microarray analysis showed the largest number (up- and down- regulations) of gene expressions in the cerebral cortex (378), midbrain (376), hippocampus (375), ventral striatum (353), amygdala (301), and hypothalamus (201) under low-dose (0.08 mg/kg) of MK-801. Under high-dose (0.16 mg/kg), ventral striatum (811) showed the largest number of gene expression changes. Gene expression changes were functionally categorized to reveal expression of genes and function varies with each brain region. CONCLUSION: Acute MK-801 treatment increases synchrony of baseline gamma oscillations, and causes very early changes in gene expressions in six individual rat brain regions, a first report. PMID:26629322

Bone changes of mandibular condyle using cone beam computed tomography

Energy Technology Data Exchange (ETDEWEB)

Lee, Ji Un; Kim, Hyung Seop; Song, Ju Seop; Kim, Kyoung A; Koh, Kwang Joon [Chonbuk National Univ., Chonju (Korea, Republic of)

2007-09-15

To assess bone changes of mandibular condyle using cone beam computed tomography (CBCT) in temporomandibualr disorder (TMD) patients. 314 temporomandibular joints (TMJs) images of 163 TMD patients were examined at the Department of Oral and Maxillofacial Radiology, Chonbuk National University. The images were obtained by PSR9000N (Asahi Roentgen Co., Japan) and reconstructed by using Asahivision software (Asahi Roentgen Co., Japan). The CBCT images were examined three times with four weeks interval by three radiologists. Bone changes of mandibular condyle such as flattening, sclerosis, erosion and osteophyte formation were observed in sagittal, axial, coronal and 3 dimensional images of the mandibular condyle. The statistical analysis was performed using SPSS 12.0. Intra-and interobserver agreement were performed by 3 radiologists without the knowledge of clinical information. Osteopathy (2.9%) was found more frequently on anterior surface of the mandibular condyle. Erosion (31.8%) was found more frequently on anterior surface of the mandibular condyle. The intraobserver agreement was good to excellent (k=0.78{sub 0}.84), but interobserver agreement was fair (k=0.45). CBCT can provide high qualified images of bone changes of the TMJ with axial, coronal and 3 dimensional images.

Bone changes of mandibular condyle using cone beam computed tomography

International Nuclear Information System (INIS)

Lee, Ji Un; Kim, Hyung Seop; Song, Ju Seop; Kim, Kyoung A; Koh, Kwang Joon

2007-01-01

To assess bone changes of mandibular condyle using cone beam computed tomography (CBCT) in temporomandibualr disorder (TMD) patients. 314 temporomandibular joints (TMJs) images of 163 TMD patients were examined at the Department of Oral and Maxillofacial Radiology, Chonbuk National University. The images were obtained by PSR9000N (Asahi Roentgen Co., Japan) and reconstructed by using Asahivision software (Asahi Roentgen Co., Japan). The CBCT images were examined three times with four weeks interval by three radiologists. Bone changes of mandibular condyle such as flattening, sclerosis, erosion and osteophyte formation were observed in sagittal, axial, coronal and 3 dimensional images of the mandibular condyle. The statistical analysis was performed using SPSS 12.0. Intra-and interobserver agreement were performed by 3 radiologists without the knowledge of clinical information. Osteopathy (2.9%) was found more frequently on anterior surface of the mandibular condyle. Erosion (31.8%) was found more frequently on anterior surface of the mandibular condyle. The intraobserver agreement was good to excellent (k=0.78 0 .84), but interobserver agreement was fair (k=0.45). CBCT can provide high qualified images of bone changes of the TMJ with axial, coronal and 3 dimensional images

Ab Initio Molecular-Dynamics Simulation of Neuromorphic Computing in Phase-Change Memory Materials.

Science.gov (United States)

Skelton, Jonathan M; Loke, Desmond; Lee, Taehoon; Elliott, Stephen R

2015-07-08

We present an in silico study of the neuromorphic-computing behavior of the prototypical phase-change material, Ge2Sb2Te5, using ab initio molecular-dynamics simulations. Stepwise changes in structural order in response to temperature pulses of varying length and duration are observed, and a good reproduction of the spike-timing-dependent plasticity observed in nanoelectronic synapses is demonstrated. Short above-melting pulses lead to instantaneous loss of structural and chemical order, followed by delayed partial recovery upon structural relaxation. We also investigate the link between structural order and electrical and optical properties. These results pave the way toward a first-principles understanding of phase-change physics beyond binary switching.

Teaching Tip: Using Rapid Game Prototyping for Exploring Requirements Discovery and Modeling

Science.gov (United States)

Dalal, Nikunj

2012-01-01

We describe the use of rapid game prototyping as a pedagogic technique to experientially explore and learn requirements discovery, modeling, and specification in systems analysis and design courses. Students have a natural interest in gaming that transcends age, gender, and background. Rapid digital game creation is used to build computer games…

Changes in Indirect Markers of Muscle Damage and Tendons After Daily Drop Jumping Exercise with Rapid Load Increase

Directory of Open Access Journals (Sweden)

Vidas Paleckis, Mantas Mickevičius, Audrius Snieckus, Vytautas Streckis, Mati Pääsuke, Saulius Rutkauskas, Rasa Steponavičiūtė, Albertas Skurvydas, Sigitas Kamandulis

2015-12-01

Full Text Available The aim of this study was to assess changes in indirect markers of muscle damage and type I collagen degradation, as well as, patellar and Achilles tendon morphological differences during nine daily drop-jumps sessions with constant load alternated with rapid increases in load to test the hypothesis that frequent drop-jump training results in negative muscular and tendon adaptation. Young men (n = 9 performed daily drop jump workouts with progression every 3 days in terms of number of jumps, platform height and squat amplitude. Voluntary and electrically evoked knee extensor torque, muscle soreness, blood plasma creatine kinase (CK activity and carboxyterminal cross-linked telopeptide (ICTP, patellar and Achilles tendon thickness and cross-sectional area (CSA were assessed at different time points during the training period and again on days 1, 3, 10 and 17 after the training. The findings were as follows: (1 steady decline in maximal muscle strength with major recovery within 24 hours after the first six daily training sessions; (2 larger decline in electrically induced muscle torque and prolonged recovery during last three training sessions; (3 increase in patellar and Achilles tendons CSA without change in thickness towards the end of training period; (4 increase in jump height but not in muscle strength after whole training period. Our findings suggest that frequent drop-jump sessions with constant load alternated with rapid increases in load do not induce severe muscle damage or major changes in tendons, nonetheless, this type of loading is not advisable for muscle strength improvement.

A practical method of modeling a treatment couch using cone-beam computed tomography for intensity-modulated radiation therapy and RapidArc treatment delivery

Energy Technology Data Exchange (ETDEWEB)

Aldosary, Ghada, E-mail: ghada.aldosary@mail.mcgill.ca [Medical Physics Unit, McGill University Health Centre, Montreal, Quebec (Canada); Nobah, Ahmad; Al-Zorkani, Faisal [Biomedical Physics Department, King Faisal Specialist Hospital and Research Center, Riyadh (Saudi Arabia); Devic, Slobodan [Department of Radiation Oncology, Jewish General Hospital, McGill University, Montreal, Quebec (Canada); Moftah, Belal [Medical Physics Unit, McGill University Health Centre, Montreal, Quebec (Canada); Biomedical Physics Department, King Faisal Specialist Hospital and Research Center, Riyadh (Saudi Arabia)

2015-01-01

The effect of a treatment couch on dose perturbation is not always fully considered in intensity-modulated radiation therapy (IMRT) and volumetric modulated arc therapy (VMAT). In the course of inverse planning radiotherapy techniques, beam parameter optimization may change in the absence of the couch, causing errors in the calculated dose distributions. Although modern treatment planning systems (TPS) include data for the treatment couch components, they are not manufactured identically. Thus, variations in their Hounsfield unit (HU) values may exist. Moreover, a radiotherapy facility may wish to have a third-party custom tabletop installed that is not included by the TPS vendor. This study demonstrates a practical and simple method of acquiring reliable computed tomography (CT) data for the treatment couch and shows how the absorbed dose calculated with the modeled treatment couch can differ from that with the default treatment couch found in the TPS. We also experimentally verified that neglecting to incorporate the treatment couch completely in the treatment planning process might result in dose differences of up to 9.5% and 7.3% for 4-MV and 10-MV photon beams, respectively. Furthermore, 20 RapidArc and IMRT cases were used to quantify the change in calculated dose distributions caused by using either the default or modeled couch. From 2-dimensional (2D) ionization chamber array measurements, we observed large dose distribution differences between the measurements and calculations when the couch was omitted that varied according to the planning technique and anatomic site. Thus, incorporating the treatment couch in the dose calculation phase of treatment planning significantly decreases dose calculation errors.

It's all change at the Computer Centre

CERN Multimedia

Laëtitia Pedroso

2011-01-01

The IT and EN Departments are modernising the infrastructure of the Computer Centre to improve the conditions in which the equipment has to operate and to increase capacity. The construction work has already begun and is due to be completed in October 2012.   Every year CERN experiences around ten power cuts lasting from less than a second to several hours. In most cases the two protection systems - the UPS* and the diesel generators – are able to ensure that the operation of the Computer Centre is not affected. As Vincent Doré, the project leader for the IT Department, and Paul Pepinster, the EN Department's technical coordinator in charge of modernising the infrastructure, explains: "Building 513 has two types of computing facilities – the "non-critical" ones, such as the servers for "off-line" computing, which have UPS systems ensuring that they can operate for 10 minutes after a power cut, and the "critical&...

Three-dimensional evaluation of soft tissue changes in the orofacial region after tooth-borne and bone-borne surgically assisted rapid maxillary expansion

NARCIS (Netherlands)

Nada, R.M.; Loon, B. van; Maal, T.J.J.; Berge, S.J.; Mostafa, Y.A.; Kuijpers-Jagtman, A.M.; Schols, J.G.J.H.

2013-01-01

OBJECTIVES: This study seeks to three-dimensionally assess soft tissue changes in the orofacial region following tooth-borne and bone-borne surgically assisted rapid maxillary expansion (SARME). MATERIALS AND METHODS: This prospective cohort study included 40 skeletally mature patients with

[Key points for esthetic rehabilitation of anterior teeth using chair-side computer aided design and computer aided manufacture technique].

Science.gov (United States)

Yang, J; Feng, H L

2018-04-09

With the rapid development of the chair-side computer aided design and computer aided manufacture (CAD/CAM) technology, its accuracy and operability of have been greatly improved in recent years. Chair-side CAD/CAM system may produce all kinds of indirect restorations, and has the advantages of rapid, accurate and stable production. It has become the future development direction of Stomatology. This paper describes the clinical application of the chair-side CAD/CAM technology for anterior aesthetic restorations from the aspects of shade and shape.

Evidence-based medicine in rapidly changing technologies

DEFF Research Database (Denmark)

Schroeder, Torben Veith

2008-01-01

Evidence-based medicine (EBM) is not a randomised controlled trial (RCT), but EBM seeks to apply evidence gained from scientific methods - which could be RCT - to daily medical practice. Any surgical treatment reflects a certain development technically as well as skills based. The procedure may....... Special considerations should be given in rapidly developing fields. If started too early the resulting comparison will likely turn out to be irrelevant because the new technology is not fully developed, not mastered or the device may have undergone major modifications rendering the results obsolete....... On the other hand, if started too late there is a chance that data may be lost because the technology has already been introduced into the daily clinics and physicians may be unwilling to recruit patients. Or the opposite, that the technique may have been rejected without a proper trial. In this situation...

We really need to talk: adapting FDA processes to rapid change.

Science.gov (United States)

Lykken, Sara

2013-01-01

The rapidly evolving realm of modern commerce strains traditional regulatory paradigms. This paper traces the historical evolution of FDA crisis-response regulation and provides examples of ways in which the definitions and procedures resulting from that past continue to be challenged by new products as market entrants, some in good faith and others not, take actions that create disconnects between actual product and marketing controls and those that consumers might expect. The paper then explores some of the techniques used by other federal agencies that have faced similar challenges in environments characterized by rapid innovation, and draws from this analysis suggestions for improvement of the FDA's warning letter system.

JINR rapid communications

International Nuclear Information System (INIS)

1999-01-01

The present collection of rapid communications from JINR, Dubna, contains seven separate records on measurements of the total cross section difference Δσ L (np) at 1.59, 1.79, and 2.20 GeV, to the estimation of angular distributions of double charged spectator fragments in nucleus-nucleus interactions at superhigh energies, simulation dE/dx analysis results for silicon inner tracking system of ALICE set-up at LHC accelerator, high-multiplicity processes, triggering of high-multiplicity events using calorimetry, ORBIT-3.0 - a computer code for simulation and correction of the closed orbit and first turn in synchrotrons and determination of memory performance

Attacks on computer systems

Directory of Open Access Journals (Sweden)

Dejan V. Vuletić

2012-01-01

Full Text Available Computer systems are a critical component of the human society in the 21st century. Economic sector, defense, security, energy, telecommunications, industrial production, finance and other vital infrastructure depend on computer systems that operate at local, national or global scales. A particular problem is that, due to the rapid development of ICT and the unstoppable growth of its application in all spheres of the human society, their vulnerability and exposure to very serious potential dangers increase. This paper analyzes some typical attacks on computer systems.

Novel method of fabricating individual trays for maxillectomy patients by computer-aided design and rapid prototyping.

Science.gov (United States)

Huang, Zhi; Wang, Xin-zhi; Hou, Yue-Zhong

2015-02-01

Making impressions for maxillectomy patients is an essential but difficult task. This study developed a novel method to fabricate individual trays by computer-aided design (CAD) and rapid prototyping (RP) to simplify the process and enhance patient safety. Five unilateral maxillectomy patients were recruited for this study. For each patient, a computed tomography (CT) scan was taken. Based on the 3D surface reconstruction of the target area, an individual tray was manufactured by CAD/RP. With a conventional custom tray as control, two final impressions were made using the different types of tray for each patient. The trays were sectioned, and in each section the thickness of the material was measured at six evenly distributed points. Descriptive statistics and paired t-test were used to examine the difference of the impression thickness. SAS 9.3 was applied in the statistical analysis. Afterwards, all casts were then optically 3D scanned and compared digitally to evaluate the feasibility of this method. Impressions of all five maxillectomy patients were successfully made with individual trays fabricated by CAD/RP and traditional trays. The descriptive statistics of impression thickness measurement showed slightly more uneven results in the traditional trays, but no statistical significance was shown. A 3D digital comparison showed acceptable discrepancies within 1 mm in the majority of cast areas. The largest difference of 3 mm was observed in the buccal wall of the defective areas. Moderate deviations of 1 to 2 mm were detected in the buccal and labial vestibular groove areas. This study confirmed the feasibility of a novel method of fabricating individual trays by CAD/RP. Impressions made by individual trays manufactured using CAD/RP had a uniform thickness, with an acceptable level of accuracy compared to those made through conventional processes. © 2014 by the American College of Prosthodontists.

Computed tomography structural lung changes in discordant airflow limitation.

Directory of Open Access Journals (Sweden)

Firdaus A A Mohamed Hoesein

Full Text Available There is increasing evidence that structural lung changes may be present before the occurrence of airflow limitation as assessed by spirometry. This study investigated the prevalence of computed tomography (CT quantified emphysema, airway wall thickening and gas trapping according to classification of airflow limitation (FEV1/FVC 70%; group 2LLN; and group 370% but FEV1 <80% predicted, were excluded. Multivariate regression analysis correcting for covariates was used to asses the extent of emphysema, airway wall thickening and gas trapping according to three groups of airflow limitation.Mean (standard deviation age was 62.5 (5.2 years and packyears smoked was 41.0 (18.0. Group 2 subjects when compared to group 1 had a significantly lower 15(th percentile, -920.6 HU versus -912.2 HU; a higher Pi10, 2.87 mm versus 2.57 mm; and a higher E/I-ratio, 88.6% versus 85.6% (all p<0.001.Subjects with an FEV1/FVC<70%, but above the LLN, have a significant greater degree of structural lung changes on CT compared to subjects without airflow limitation.

Rapid Design and Navigation Tools to Enable Small-Body Missions

Data.gov (United States)

National Aeronautics and Space Administration — Rapid design and navigation tools broaden the number and scope of available missions by making the most of advances in astrodynamics and in computer software and...

The role of the Asian winter monsoon in the rapid propagation of abrupt climate changes during the last deglaciation

Science.gov (United States)

Chu, Guoqiang; Sun, Qing; Zhu, Qingzeng; Shan, Yabing; Shang, Wenyu; Ling, Yuan; Su, Youliang; Xie, Manman; Wang, Xishen; Liu, Jiaqi

2017-12-01

High-resolution temperature records spanning the last deglaciation from low latitudes are scarce; however, they are important for understanding the rapid propagation of abrupt climate events throughout the Northern Hemisphere and the tropics. Here, we present a branched GDGTs-based temperature reconstruction from the sediments of Maar Lake Huguangyan in tropical China. The record reveals that the mean temperature during the Oldest Dryas was 17.8 °C, which was followed by a two-step increase of 2-3 °C to the Bølling-Allerød, a decrease to 19.8 °C during the Younger Dryas, and a rapid warming at the onset of the Holocene. The Oldest Dryas was about 2 °C warmer than the Younger Dryas. The reconstructed temperature was weighted towards the wintertime since the lake is monomictic and the mixing process in winter supplies nutrients from the lake bottom to the entire water column, greatly promoting biological productivity. In addition, the winter-biased temperature changes observed in the study are more distinctive than the summer-biased temperature records from extra-tropical regions of East Asia. This implies that the temperature decreases during abrupt climatic events were mainly a winter phenomenon. Within the limits of the dating uncertainties, the broadly similar pattern of winter-weighted temperature change observed in both tropical Lake Huguangyan and in Greenland ice cores indicates the occurrence of tightly-coupled interactions between high latitude ice sheets and land areas in the tropics. We suggest that the winter monsoon (especially cold surges) could play an important role in the rapid transmission of the temperature signal from the Arctic to the tropics.

Enabling rapid behavioral ecotoxicity studies using an integrated lab-on-a-chip systems

Science.gov (United States)

Huang, Yushi; Nugegoda, Dayanthi; Wlodkowic, Donald

2015-12-01

Behavioral ecotoxicity tests are gaining an increasing recognition in environmental toxicology. Behavior of sensitive bioindicator species can change rapidly in response to an acute exposure to contaminants and thus has a much higher sensitivity as compared to conventional LC50 mortality tests. Furthermore, behavioral endpoints seems to be very good candidates to develop early-warning biomonitoring systems needed for rapid chemical risk assessment. Behavioral tests are non-invasive, fast, do not harm indicator organisms (behavioural changes are very rapid) and are thus fully compatible with 3R (Replacement - Reduction - Refinement) principle encouraging alternatives to conventional animal testing. These characteristics are essential when designing improved ecotoxicity tests for chemical risk assessment. In this work, we present a pilot development of miniaturized Lab-on-a-Chip (LOC) devices for studying toxin avoidance behaviors of small aquatic crustaceans. As an investigative tool, LOCs represent a new direction that may miniaturize and revolutionize behavioral ecotoxicology. Specifically our innovative microfluidic prototype: (i) enables convening "caging" of specimens for real-time videomicroscopy; (ii) eliminates the evaporative water loss thus providing an opportunity for long-term behavioral studies; (iii) exploits laminar fluid flow under low Reynolds numbers to generate discrete domains and gradients enabling for the first time toxin avoidance studies on small aquatic crustaceans; (iv) integrates off-the-chip mechatronic interfaces and video analysis algorithms for single animal movement analysis. We provide evidence that by merging innovative bioelectronic and biomicrofluidic technologies we can deploy inexpensive and reliable systems for culture, electronic tracking and complex computational analysis of behavior of bioindicator organisms.

Economic analyses of rapid population growth.

Science.gov (United States)

Birdsall, N

1989-01-01

"Discussion of the macroeconomic consequences of rapid population growth is organized into three schools: pessimists, optimists, and the recent revisionists. For the revisionists, differing views are presented about the pervasiveness and relevance of market failures, such as the negative externalities of childbearing, and about the ability of families and institutions to adjust rapidly to changes brought on by rapid population growth. A welfare economics approach is used to review the merits of various public policies to reduce fertility, including public financing of family planning services and taxes and incentives associated with childbearing." The focus is on developing countries. excerpt

Daily Megavoltage Computed Tomography in Lung Cancer Radiotherapy: Correlation Between Volumetric Changes and Local Outcome

International Nuclear Information System (INIS)

Bral, Samuel; De Ridder, Mark; Duchateau, Michael; Gevaert, Thierry; Engels, Benedikt; Schallier, Denis; Storme, Guy

2011-01-01

Purpose: To assess the predictive or comparative value of volumetric changes, measured on daily megavoltage computed tomography during radiotherapy for lung cancer. Patients and Methods: We included 80 patients with locally advanced non-small-cell lung cancer treated with image-guided intensity-modulated radiotherapy. The radiotherapy was combined with concurrent chemotherapy, combined with induction chemotherapy, or given as primary treatment. Patients entered two parallel studies with moderately hypofractionated radiotherapy. Tumor volume contouring was done on the daily acquired images. A regression coefficient was derived from the volumetric changes on megavoltage computed tomography, and its predictive value was validated. Logarithmic or polynomial fits were applied to the intratreatment changes to compare the different treatment schedules radiobiologically. Results: Regardless of the treatment type, a high regression coefficient during radiotherapy predicted for a significantly prolonged cause-specific local progression free-survival (p = 0.05). Significant differences were found in the response during radiotherapy. The significant difference in volumetric treatment response between radiotherapy with concurrent chemotherapy and radiotherapy plus induction chemotherapy translated to a superior long-term local progression-free survival for concurrent chemotherapy (p = 0.03). An enhancement ratio of 1.3 was measured for the used platinum/taxane doublet in comparison with radiotherapy alone. Conclusion: Contouring on daily megavoltage computed tomography images during radiotherapy enabled us to predict the efficacy of a given treatment. The significant differences in volumetric response between treatment strategies makes it a possible tool for future schedule comparison.

Experimental and computational study on thermoelectric generators using thermosyphons with phase change as heat exchangers

International Nuclear Information System (INIS)

Araiz, M.; Martínez, A.; Astrain, D.; Aranguren, P.

2017-01-01

Highlights: • Thermosyphon with phase change heat exchanger computational model. • Construction and experimentation of a prototype. • ±9% of maximum deviation from experimental values of the main outputs. • Influence of the auxiliary equipment on the net power generation. - Abstract: An important issue in thermoelectric generators is the thermal design of the heat exchangers since it can improve their performance by increasing the heat absorbed or dissipated by the thermoelectric modules. Due to its several advantages, compared to conventional dissipation systems, a thermosyphon heat exchanger with phase change is proposed to be placed on the cold side of thermoelectric generators. Some of these advantages are: high heat-transfer rates; absence of moving parts and lack of auxiliary consumption (because fans or pumps are not required); and the fact that these systems are wickless. A computational model is developed to design and predict the behaviour of this heat exchangers. Furthermore, a prototype has been built and tested in order to demonstrate its performance and validate the computational model. The model predicts the thermal resistance of the heat exchanger with a relative error in the interval [−8.09; 7.83] in the 95% of the cases. Finally, the use of thermosyphons with phase change in thermoelectric generators has been studied in a waste-heat recovery application, stating that including them on the cold side of the generators improves the net thermoelectric production by 36% compared to that obtained with finned dissipators under forced convection.

Rapid Resuscitation with Small Volume Hypertonic Saline Solution ...

African Journals Online (AJOL)

Rapid Resuscitation with Small Volume Hypertonic Saline Solution for Patients in Traumatic Haemorrhagic Shock. ... The data were entered into a computer data base and analysed. Results: Forty five patients were enrolled and resuscitated with 250 mls 7.5% HSS. Among the studied patients, 88.9% recovered from shock ...

Cloud Computing for radiologists.

Science.gov (United States)

Kharat, Amit T; Safvi, Amjad; Thind, Ss; Singh, Amarjit

2012-07-01

Cloud computing is a concept wherein a computer grid is created using the Internet with the sole purpose of utilizing shared resources such as computer software, hardware, on a pay-per-use model. Using Cloud computing, radiology users can efficiently manage multimodality imaging units by using the latest software and hardware without paying huge upfront costs. Cloud computing systems usually work on public, private, hybrid, or community models. Using the various components of a Cloud, such as applications, client, infrastructure, storage, services, and processing power, Cloud computing can help imaging units rapidly scale and descale operations and avoid huge spending on maintenance of costly applications and storage. Cloud computing allows flexibility in imaging. It sets free radiology from the confines of a hospital and creates a virtual mobile office. The downsides to Cloud computing involve security and privacy issues which need to be addressed to ensure the success of Cloud computing in the future.

Cloud Computing for radiologists

International Nuclear Information System (INIS)

Kharat, Amit T; Safvi, Amjad; Thind, SS; Singh, Amarjit

2012-01-01

Cloud computing is a concept wherein a computer grid is created using the Internet with the sole purpose of utilizing shared resources such as computer software, hardware, on a pay-per-use model. Using Cloud computing, radiology users can efficiently manage multimodality imaging units by using the latest software and hardware without paying huge upfront costs. Cloud computing systems usually work on public, private, hybrid, or community models. Using the various components of a Cloud, such as applications, client, infrastructure, storage, services, and processing power, Cloud computing can help imaging units rapidly scale and descale operations and avoid huge spending on maintenance of costly applications and storage. Cloud computing allows flexibility in imaging. It sets free radiology from the confines of a hospital and creates a virtual mobile office. The downsides to Cloud computing involve security and privacy issues which need to be addressed to ensure the success of Cloud computing in the future

Cloud computing for radiologists

Directory of Open Access Journals (Sweden)

Amit T Kharat

2012-01-01

Full Text Available Cloud computing is a concept wherein a computer grid is created using the Internet with the sole purpose of utilizing shared resources such as computer software, hardware, on a pay-per-use model. Using Cloud computing, radiology users can efficiently manage multimodality imaging units by using the latest software and hardware without paying huge upfront costs. Cloud computing systems usually work on public, private, hybrid, or community models. Using the various components of a Cloud, such as applications, client, infrastructure, storage, services, and processing power, Cloud computing can help imaging units rapidly scale and descale operations and avoid huge spending on maintenance of costly applications and storage. Cloud computing allows flexibility in imaging. It sets free radiology from the confines of a hospital and creates a virtual mobile office. The downsides to Cloud computing involve security and privacy issues which need to be addressed to ensure the success of Cloud computing in the future.

Modifications of ORNL's computer programs MSF-21 and VTE-21 for the evaluation and rapid optimization of multistage flash and vertical tube evaporators

Energy Technology Data Exchange (ETDEWEB)

Glueckstern, P.; Wilson, J.V.; Reed, S.A.

1976-06-01

Design and cost modifications were made to ORNL's Computer Programs MSF-21 and VTE-21 originally developed for the rapid calculation and design optimization of multistage flash (MSF) and multieffect vertical tube evaporator (VTE) desalination plants. The modifications include additional design options to make possible the evaluation of desalting plants based on current technology (the original programs were based on conceptual designs applying advanced and not yet proven technological developments and design features) and new materials and equipment costs updated to mid-1975.

P-CARES 2.0.0, Probabilistic Computer Analysis for Rapid Evaluation of Structures

International Nuclear Information System (INIS)

2008-01-01

1 - Description of program or function: P-CARES 2.0.0 (Probabilistic Computer Analysis for Rapid Evaluation of Structures) was developed for NRC staff use to determine the validity and accuracy of the analysis methods used by various utilities for structural safety evaluations of nuclear power plants. P-CARES provides the capability to effectively evaluate the probabilistic seismic response using simplified soil and structural models and to quickly check the validity and/or accuracy of the SSI data received from applicants and licensees. The code is organized in a modular format with the basic modules of the system performing static, seismic, and nonlinear analysis. 2 - Methods: P-CARES is an update of the CARES program developed at Brookhaven National Laboratory during the 1980's. A major improvement is the enhanced analysis capability in which a probabilistic algorithm has been implemented to perform the probabilistic site response and soil-structure interaction (SSI) analyses. This is accomplished using several sampling techniques such as the Latin Hypercube sampling (LHC), engineering LHC, the Fekete Point Set method, and also the traditional Monte Carlo simulation. This new feature enhances the site response and SSI analysis such that the effect of uncertainty in local site soil properties can now be quantified. Another major addition to P-CARES is a graphical user interface (GUI) which significantly improves the performance of P-Cares in terms of the inter-relations among different functions of the program, and facilitates the input/output processing and execution management. It also provides many user friendly features that would allow an analyst to quickly develop insights from the analysis results. 3 - Restrictions on the complexity of the problem: None noted

Shifts in frog size and phenology: Testing predictions of climate change on a widespread anuran using data from prior to rapid climate warming.

Science.gov (United States)

Sheridan, Jennifer A; Caruso, Nicholas M; Apodaca, Joseph J; Rissler, Leslie J

2018-01-01

Changes in body size and breeding phenology have been identified as two major ecological consequences of climate change, yet it remains unclear whether climate acts directly or indirectly on these variables. To better understand the relationship between climate and ecological changes, it is necessary to determine environmental predictors of both size and phenology using data from prior to the onset of rapid climate warming, and then to examine spatially explicit changes in climate, size, and phenology, not just general spatial and temporal trends. We used 100 years of natural history collection data for the wood frog, Lithobates sylvaticus with a range >9 million km 2 , and spatially explicit environmental data to determine the best predictors of size and phenology prior to rapid climate warming (1901-1960). We then tested how closely size and phenology changes predicted by those environmental variables reflected actual changes from 1961 to 2000. Size, phenology, and climate all changed as expected (smaller, earlier, and warmer, respectively) at broad spatial scales across the entire study range. However, while spatially explicit changes in climate variables accurately predicted changes in phenology, they did not accurately predict size changes during recent climate change (1961-2000), contrary to expectations from numerous recent studies. Our results suggest that changes in climate are directly linked to observed phenological shifts. However, the mechanisms driving observed body size changes are yet to be determined, given the less straightforward relationship between size and climate factors examined in this study. We recommend that caution be used in "space-for-time" studies where measures of a species' traits at lower latitudes or elevations are considered representative of those under future projected climate conditions. Future studies should aim to determine mechanisms driving trends in phenology and body size, as well as the impact of climate on population

A new data collaboration service based on cloud computing security

Science.gov (United States)

Ying, Ren; Li, Hua-Wei; Wang, Li na

2017-09-01

With the rapid development of cloud computing, the storage and usage of data have undergone revolutionary changes. Data owners can store data in the cloud. While bringing convenience, it also brings many new challenges to cloud data security. A key issue is how to support a secure data collaboration service that supports access and updates to cloud data. This paper proposes a secure, efficient and extensible data collaboration service, which prevents data leaks in cloud storage, supports one to many encryption mechanisms, and also enables cloud data writing and fine-grained access control.

Biomes computed from simulated climatologies

Energy Technology Data Exchange (ETDEWEB)

Claussen, M.; Esch, M. [Max-Planck-Institut fuer Meteorologie, Hamburg (Germany)

1994-01-01

The biome model of Prentice et al. is used to predict global patterns of potential natural plant formations, or biomes, from climatologies simulated by ECHAM, a model used for climate simulations at the Max-Planck-Institut fuer Meteorologie. This study undertaken in order to show the advantage of this biome model in diagnosing the performance of a climate model and assessing effects of past and future climate changes predicted by a climate model. Good overall agreement is found between global patterns of biomes computed from observed and simulated data of present climate. But there are also major discrepancies indicated by a difference in biomes in Australia, in the Kalahari Desert, and in the Middle West of North America. These discrepancies can be traced back to in simulated rainfall as well as summer or winter temperatures. Global patterns of biomes computed from an ice age simulation reveal that North America, Europe, and Siberia should have been covered largely by tundra and taiga, whereas only small differences are for the tropical rain forests. A potential northeast shift of biomes is expected from a simulation with enhanced CO{sub 2} concentration according to the IPCC Scenario A. Little change is seen in the tropical rain forest and the Sahara. Since the biome model used is not capable of predicting chances in vegetation patterns due to a rapid climate change, the latter simulation to be taken as a prediction of chances in conditions favourable for the existence of certain biomes, not as a reduction of a future distribution of biomes. 15 refs., 8 figs., 2 tabs.

Computed Tomography Number Changes Observed During Computed Tomography–Guided Radiation Therapy for Head and Neck Cancer

International Nuclear Information System (INIS)

Feng, Mei; Yang, Cungeng; Chen, Xiaojian; Xu, Shouping; Moraru, Ion; Lang, Jinyi; Schultz, Christopher; Li, X. Allen

2015-01-01

Purpose: To investigate CT number (CTN) changes in gross tumor volume (GTV) and organ at risk (OAR) according to daily diagnostic-quality CT acquired during CT-guided intensity modulated radiation therapy for head and neck cancer (HNC) patients. Methods and Materials: Computed tomography scans acquired using a CT-on-rails during daily CT-guided intensity modulated radiation therapy for 15 patients with stage II to IVa squamous cell carcinoma of the head and neck were analyzed. The GTV, parotid glands, spinal cord, and nonspecified tissue were generated on each selected daily CT. The changes in CTN distributions and the mean and mode values were collected. Pearson analysis was used to assess the correlation between the CTN change, organ volume reduction, and delivered radiation dose. Results: Volume and CTN changes for GTV and parotid glands can be observed during radiation therapy delivery for HNC. The mean (±SD) CTNs in GTV and ipsi- and contralateral parotid glands were reduced by 6 ± 10, 8 ± 7, and 11 ± 10 Hounsfield units, respectively, for all patients studied. The mean CTN changes in both spinal cord and nonspecified tissue were almost invisible (<2 Hounsfield units). For 2 patients studied, the absolute mean CTN changes in GTV and parotid glands were strongly correlated with the dose delivered (P<.001 and P<.05, respectively). For the correlation between CTN reductions and delivered isodose bins for parotid glands, the Pearson coefficient varied from −0.98 (P<.001) in regions with low-dose bins to 0.96 (P<.001) in high-dose bins and were patient specific. Conclusions: The CTN can be reduced in tumor and parotid glands during the course of radiation therapy for HNC. There was a fair correlation between CTN reduction and radiation doses for a subset of patients, whereas the correlation between CTN reductions and volume reductions in GTV and parotid glands were weak. More studies are needed to understand the mechanism for the radiation-induced CTN changes

SASqPCR: robust and rapid analysis of RT-qPCR data in SAS.

Directory of Open Access Journals (Sweden)

Daijun Ling

Full Text Available Reverse transcription quantitative real-time PCR (RT-qPCR is a key method for measurement of relative gene expression. Analysis of RT-qPCR data requires many iterative computations for data normalization and analytical optimization. Currently no computer program for RT-qPCR data analysis is suitable for analytical optimization and user-controllable customization based on data quality, experimental design as well as specific research aims. Here I introduce an all-in-one computer program, SASqPCR, for robust and rapid analysis of RT-qPCR data in SAS. This program has multiple macros for assessment of PCR efficiencies, validation of reference genes, optimization of data normalizers, normalization of confounding variations across samples, and statistical comparison of target gene expression in parallel samples. Users can simply change the macro variables to test various analytical strategies, optimize results and customize the analytical processes. In addition, it is highly automatic and functionally extendable. Thus users are the actual decision-makers controlling RT-qPCR data analyses. SASqPCR and its tutorial are freely available at http://code.google.com/p/sasqpcr/downloads/list.

Single wafer rapid thermal multiprocessing

International Nuclear Information System (INIS)

Saraswat, K.C.; Moslehi, M.M.; Grossman, D.D.; Wood, S.; Wright, P.; Booth, L.

1989-01-01

Future success in microelectronics will demand rapid innovation, rapid product introduction and ability to react to a change in technological and business climate quickly. These technological advances in integrated electronics will require development of flexible manufacturing technology for VLSI systems. However, the current approach of establishing factories for mass manufacturing of chips at a cost of more than 200 million dollars is detrimental to flexible manufacturing. The authors propose concepts of a micro factory which may be characterized by more economical small scale production, higher flexibility to accommodate many products on several processes, and faster turnaround and learning. In-situ multiprocessing equipment where several process steps can be done in sequence may be a key ingredient in this approach. For this environment to be flexible, the equipment must have ability to change processing environment, requiring extensive in-situ measurements and real time control. This paper describes the development of a novel single wafer rapid thermal multiprocessing (RTM) reactor for next generation flexible VLSI manufacturing. This reactor will combine lamp heating, remote microwave plasma and photo processing in a single cold-wall chamber, with applications for multilayer in-situ growth and deposition of dielectrics, semiconductors and metals

Computational approaches to energy materials

CERN Document Server

Catlow, Richard; Walsh, Aron

2013-01-01

The development of materials for clean and efficient energy generation and storage is one of the most rapidly developing, multi-disciplinary areas of contemporary science, driven primarily by concerns over global warming, diminishing fossil-fuel reserves, the need for energy security, and increasing consumer demand for portable electronics. Computational methods are now an integral and indispensable part of the materials characterisation and development process.   Computational Approaches to Energy Materials presents a detailed survey of current computational techniques for the

A primer on the energy efficiency of computing

Energy Technology Data Exchange (ETDEWEB)

Koomey, Jonathan G. [Research Fellow, Steyer-Taylor Center for Energy Policy and Finance, Stanford University (United States)

2015-03-30

The efficiency of computing at peak output has increased rapidly since the dawn of the computer age. This paper summarizes some of the key factors affecting the efficiency of computing in all usage modes. While there is still great potential for improving the efficiency of computing devices, we will need to alter how we do computing in the next few decades because we are finally approaching the limits of current technologies.

Are rapid changes in brain elasticity possible?

Science.gov (United States)

Parker, K. J.

2017-09-01

Elastography of the brain is a topic of clinical and preclinical research, motivated by the potential for viscoelastic measures of the brain to provide sensitive indicators of pathological processes, and to assist in early diagnosis. To date, studies of the normal brain and of those with confirmed neurological disorders have reported a wide range of shear stiffness and shear wave speeds, even within similar categories. A range of factors including the shear wave frequency, and the age of the individual are thought to have a possible influence. However, it may be that short term dynamics within the brain may have an influence on the measured stiffness. This hypothesis is addressed quantitatively using the framework of the microchannel flow model, which derives the tissue stiffness, complex modulus, and shear wave speed as a function of the vascular and fluid network in combination with the elastic matrix that comprise the brain. Transformation rules are applied so that any changes in the fluid channels or the elastic matrix can be mapped to changes in observed elastic properties on a macroscopic scale. The results are preliminary but demonstrate that measureable, time varying changes in brain stiffness are possible simply by accounting for vasodynamic or electrochemical changes in the state of any region of the brain. The value of this preliminary exploration is to identify possible mechanisms and order-of-magnitude changes that may be testable in vivo by specialized protocols.

Shifts in hatch dates do not provide pied flycatchers with a rapid ontogenetic route to adjust offspring time schedules to climate change

NARCIS (Netherlands)

Ouwehand, Janne; Burger, Claudia; Both, Christiaan

1. Environments change rapidly, and it is unclear whether organisms with complex life-styles, such as avian migrants, are able to adjust sufficiently. For understanding human impacts on ecosystem functioning, it is crucial to understand how well, and by which mechanisms species are able to adapt. 2.

Security in cloud computing

OpenAIRE

Moreno Martín, Oriol

2016-01-01

Security in Cloud Computing is becoming a challenge for next generation Data Centers. This project will focus on investigating new security strategies for Cloud Computing systems. Cloud Computingisarecent paradigmto deliver services over Internet. Businesses grow drastically because of it. Researchers focus their work on it. The rapid access to exible and low cost IT resources on an on-demand fashion, allows the users to avoid planning ahead for provisioning, and enterprises to save money ...

Two schemes for rapid generation of digital video holograms using PC cluster

Science.gov (United States)

Park, Hanhoon; Song, Joongseok; Kim, Changseob; Park, Jong-Il

2017-12-01

Computer-generated holography (CGH), which is a process of generating digital holograms, is computationally expensive. Recently, several methods/systems of parallelizing the process using graphic processing units (GPUs) have been proposed. Indeed, use of multiple GPUs or a personal computer (PC) cluster (each PC with GPUs) enabled great improvements in the process speed. However, extant literature has less often explored systems involving rapid generation of multiple digital holograms and specialized systems for rapid generation of a digital video hologram. This study proposes a system that uses a PC cluster and is able to more efficiently generate a video hologram. The proposed system is designed to simultaneously generate multiple frames and accelerate the generation by parallelizing the CGH computations across a number of frames, as opposed to separately generating each individual frame while parallelizing the CGH computations within each frame. The proposed system also enables the subprocesses for generating each frame to execute in parallel through multithreading. With these two schemes, the proposed system significantly reduced the data communication time for generating a digital hologram when compared with that of the state-of-the-art system.

Employing Subgoals in Computer Programming Education

Science.gov (United States)

Margulieux, Lauren E.; Catrambone, Richard; Guzdial, Mark

2016-01-01

The rapid integration of technology into our professional and personal lives has left many education systems ill-equipped to deal with the influx of people seeking computing education. To improve computing education, we are applying techniques that have been developed for other procedural fields. The present study applied such a technique, subgoal…

A spread willingness computing-based information dissemination model.

Science.gov (United States)

Huang, Haojing; Cui, Zhiming; Zhang, Shukui

2014-01-01

This paper constructs a kind of spread willingness computing based on information dissemination model for social network. The model takes into account the impact of node degree and dissemination mechanism, combined with the complex network theory and dynamics of infectious diseases, and further establishes the dynamical evolution equations. Equations characterize the evolutionary relationship between different types of nodes with time. The spread willingness computing contains three factors which have impact on user's spread behavior: strength of the relationship between the nodes, views identity, and frequency of contact. Simulation results show that different degrees of nodes show the same trend in the network, and even if the degree of node is very small, there is likelihood of a large area of information dissemination. The weaker the relationship between nodes, the higher probability of views selection and the higher the frequency of contact with information so that information spreads rapidly and leads to a wide range of dissemination. As the dissemination probability and immune probability change, the speed of information dissemination is also changing accordingly. The studies meet social networking features and can help to master the behavior of users and understand and analyze characteristics of information dissemination in social network.

The rheology of concentrated dispersions: structure changes and shear thickening in experiments and computer simulations

NARCIS (Netherlands)

Boersma, W.H.; Laven, J.; Stein, H.N.; Moldenaers, P.; Keunings, R.

1992-01-01

The flow-induced changes in the microstructure and rheol. of very concd., shear thickening dispersions are studied. Results obtained for polystyrene sphere dispersions are compared with previous data and computer simulations to give better insight into the processes occurring in the dispersions. [on

Platformation: Cloud Computing Tools at the Service of Social Change

Directory of Open Access Journals (Sweden)

Anil Patel

2012-07-01

Full Text Available The following article establishes some context and definitions for what is termed the “sharing imperative” – a movement or tendency towards sharing information online and in real time that has rapidly transformed several industries. As internet-enabled devices proliferate to all corners of the globe, ways of working and accessing information have changed. Users now expect to be able to access the products, services, and information that they want from anywhere, at any time, on any device. This article addresses how the nonprofit sector might respond to those demands by embracing the sharing imperative. It suggests that how well an organization shares has become one of the most pressing governance questions a nonprofit organization must tackle. Finally, the article introduces Platformation, a project whereby tools that enable better inter and intra-organizational sharing are tested for scalability, affordability, interoperability, and security, all with a non-profit lens.

Computer-oriented approach to fault-tree construction

International Nuclear Information System (INIS)

Salem, S.L.; Apostolakis, G.E.; Okrent, D.

1976-11-01

A methodology for systematically constructing fault trees for general complex systems is developed and applied, via the Computer Automated Tree (CAT) program, to several systems. A means of representing component behavior by decision tables is presented. The method developed allows the modeling of components with various combinations of electrical, fluid and mechanical inputs and outputs. Each component can have multiple internal failure mechanisms which combine with the states of the inputs to produce the appropriate output states. The generality of this approach allows not only the modeling of hardware, but human actions and interactions as well. A procedure for constructing and editing fault trees, either manually or by computer, is described. The techniques employed result in a complete fault tree, in standard form, suitable for analysis by current computer codes. Methods of describing the system, defining boundary conditions and specifying complex TOP events are developed in order to set up the initial configuration for which the fault tree is to be constructed. The approach used allows rapid modifications of the decision tables and systems to facilitate the analysis and comparison of various refinements and changes in the system configuration and component modeling

Rapid environmental change over the past decade revealed by isotopic analysis of the California mussel in the northeast Pacific.

Directory of Open Access Journals (Sweden)

Catherine A Pfister

Full Text Available The anthropogenic input of fossil fuel carbon into the atmosphere results in increased carbon dioxide (CO(2 into the oceans, a process that lowers seawater pH, decreases alkalinity and can inhibit the production of shell material. Corrosive water has recently been documented in the northeast Pacific, along with a rapid decline in seawater pH over the past decade. A lack of instrumentation prior to the 1990s means that we have no indication whether these carbon cycle changes have precedence or are a response to recent anthropogenic CO(2 inputs. We analyzed stable carbon and oxygen isotopes (δ(13C, δ(18O of decade-old California mussel shells (Mytilus californianus in the context of an instrumental seawater record of the same length. We further compared modern shells to shells from 1000 to 1340 years BP and from the 1960s to the present and show declines in the δ(13C of modern shells that have no historical precedent. Our finding of decline in another shelled mollusk (limpet and our extensive environmental data show that these δ(13C declines are unexplained by changes to the coastal food web, upwelling regime, or local circulation. Our observed decline in shell δ(13C parallels other signs of rapid changes to the nearshore carbon cycle in the Pacific, including a decline in pH that is an order of magnitude greater than predicted by an equilibrium response to rising atmospheric CO(2, the presence of low pH water throughout the region, and a record of a similarly steep decline in δ(13C in algae in the Gulf of Alaska. These unprecedented changes and the lack of a clear causal variable underscores the need for better quantifying carbon dynamics in nearshore environments.

Navigate the Digital Rapids

Science.gov (United States)

Lindsay, Julie; Davis, Vicki

2010-01-01

How can teachers teach digital citizenship when the digital landscape is changing so rapidly? How can teachers teach proper online social interactions when the students are outside their classroom and thus outside their control? Will encouraging students to engage in global collaborative environments land teachers in hot water? These are the…

Mandibular dental arch short and long-term spontaneous dentoalveolar changes after slow or rapid maxillary expansion: a systematic review

Directory of Open Access Journals (Sweden)

Arthur César de Medeiros Alves

Full Text Available ABSTRACT Objective: The aim of this systematic review was to analyze the short and long-term spontaneous dentoalveolar changes of the mandibular dental arch after slow (SME or rapid (RME maxillary expansion in the mixed and early permanent dentitions. Methods: An electronic search was performed in the following databases: PubMed/Medline, Cochrane Library, Scopus, Embase and Web of Science. Eligibility criteria for article selection included randomized controlled trials and prospective studies written in English, with no restriction of year of publication, involving patients who underwent SME or RME during the mixed or early permanent dentitions. A double-blind search of articles was performed by two reviewers. Initially, the title and the abstract of the studies were read, and their references were also hand-searched for possible missing studies. A methodological quality scoring scale was used to analyze the selected articles. Results: The search retrieved 373 articles, but only 6 were selected for review after application of the eligibility and exclusion criteria. Non-clinically significant spontaneous dentoalveolar changes of approximately 1mm were found in the mandibular dental arch in the short and long-term, after slow or rapid maxillary expansions. Furthermore, no significant differences were found between treated and control groups. Conclusions: There is enough evidence to conclude that negligible short and long-term spontaneous dentoalveolar changes tend to occur in the mandibular dental arch after SME or RME in the mixed and early permanent dentitions. More randomized studies with appropriate control group are required to better evaluate this issue.

Object-based change detection in rapid urbanization regions with remotely sensed observations: a case study of Shenzhen, China

Science.gov (United States)

He, Lihuang; Dong, Guihua; Wang, Wei-Min; Yang, Lijun; Liang, Hong

2013-10-01

China, the most populous country on Earth, has experienced rapid urbanization which is one of the main causes of many environmental and ecological problems. Therefore, the monitoring of rapid urbanization regions and the environment is of critical importance for their sustainable development. In this study, the object-based classification is employed to detect the change of land cover in Shenzhen, which is located in South China and has been urbanized rapidly in recent three decades. First, four Landsat TM images, which were acquired on 1990, 2000 and 2010, respectively, are selected from the image database. Atmospheric corrections are conducted on these images with improved dark-object subtraction technique and surface meteorological observations. Geometric correction is processed with ground control points derived from topographic maps. Second, a region growing multi-resolution segmentation and a soft nearest neighbour classifier are used to finish object-based classification. After analyzing the fraction of difference classes over time series, we conclude that the comparison of derived land cover classes with socio-economic statistics demonstrates the strong positive correlation between built-up classes and urban population as well as gross GDP and GDPs in second and tertiary industries. Two different mechanisms of urbanization, namely new land development and redevelopment, are revealed. Consequently, we found that, the districts of Shenzhen were urbanized through different mechanisms.

Graphics processor efficiency for realization of rapid tabular computations

International Nuclear Information System (INIS)

Dudnik, V.A.; Kudryavtsev, V.I.; Us, S.A.; Shestakov, M.V.

2016-01-01

Capabilities of graphics processing units (GPU) and central processing units (CPU) have been investigated for realization of fast-calculation algorithms with the use of tabulated functions. The realization of tabulated functions is exemplified by the GPU/CPU architecture-based processors. Comparison is made between the operating efficiencies of GPU and CPU, employed for tabular calculations at different conditions of use. Recommendations are formulated for the use of graphical and central processors to speed up scientific and engineering computations through the use of tabulated functions

Extremely rapid directional change during Matuyama-Brunhes geomagnetic polarity reversal

Science.gov (United States)

Sagnotti, Leonardo; Scardia, Giancarlo; Giaccio, Biagio; Liddicoat, Joseph C.; Nomade, Sebastien; Renne, Paul R.; Sprain, Courtney J.

2014-11-01

We report a palaeomagnetic investigation of the last full geomagnetic field reversal, the Matuyama-Brunhes (M-B) transition, as preserved in a continuous sequence of exposed lacustrine sediments in the Apennines of Central Italy. The palaeomagnetic record provides the most direct evidence for the tempo of transitional field behaviour yet obtained for the M-B transition. 40Ar/39Ar dating of tephra layers bracketing the M-B transition provides high-accuracy age constraints and indicates a mean sediment accumulation rate of about 0.2 mm yr-1 during the transition. Two relative palaeointensity (RPI) minima are present in the M-B transition. During the terminus of the upper RPI minimum, a directional change of about 180 ° occurred at an extremely fast rate, estimated to be less than 2 ° per year, with no intermediate virtual geomagnetic poles (VGPs) documented during the transit from the southern to northern hemisphere. Thus, the entry into the Brunhes Normal Chron as represented by the palaeomagnetic directions and VGPs developed in a time interval comparable to the duration of an average human life, which is an order of magnitude more rapid than suggested by current models. The reported investigation therefore provides high-resolution integrated palaeomagnetic and radioisotopic data that document the fine details of the anatomy and tempo of the M-B transition in Central Italy that in turn are crucial for a better understanding of Earth's magnetic field, and for the development of more sophisticated models that are able to describe its global structure and behaviour.

A rapid, computational approach for assessing interfraction esophageal motion for use in stereotactic body radiation therapy planning

Directory of Open Access Journals (Sweden)

Michael L. Cardenas, MD

2018-04-01

Full Text Available Purpose: We present a rapid computational method for quantifying interfraction motion of the esophagus in patients undergoing stereotactic body radiation therapy on a magnetic resonance (MR guided radiation therapy system. Methods and materials: Patients who underwent stereotactic body radiation therapy had simulation computed tomography (CT and on-treatment MR scans performed. The esophagus was contoured on each scan. CT contours were transferred to MR volumes via rigid registration. Digital Imaging and Communications in Medicine files containing contour points were exported to MATLAB. In-plane CT and MR contour points were spline interpolated, yielding boundaries with centroid positions, CCT and CMR. MR contour points lying outside of the CT contour were extracted. For each such point, BMR(j, a segment from CCT intersecting BMR(j, was produced; its intersection with the CT contour, BCT(i, was calculated. The length of the segment Sij, between BCT(i and BMR(j, was found. The orientation θ was calculated from Sij vector components:θ = arctan[(Sijy / (Sijx]A set of segments {Sij} was produced for each slice and binned by quadrant with 0° < θ ≤ 90°, 90° < θ ≤ 180°, 180° < θ ≤ 270°, and 270° < θ ≤ 360° for the left anterior, right anterior, right posterior, and left posterior quadrants, respectively. Slices were binned into upper, middle, and lower esophageal (LE segments. Results: Seven patients, each having 3 MR scans, were evaluated, yielding 1629 axial slices and 84,716 measurements. The LE segment exhibited the greatest magnitude of motion. The mean LE measurements in the left anterior, left posterior, right anterior, and right posterior were 5.2 ± 0.07 mm, 6.0 ± 0.09 mm, 4.8 ± 0.08 mm, and 5.1 ± 0.08 mm, respectively. There was considerable interpatient variability. Conclusions: The LE segment exhibited the greatest magnitude of mobility compared with the

Comparison of Computational Approaches for Rapid Aerodynamic Assessment of Small UAVs

Science.gov (United States)

Shafer, Theresa C.; Lynch, C. Eric; Viken, Sally A.; Favaregh, Noah; Zeune, Cale; Williams, Nathan; Dansie, Jonathan

2014-01-01

Computational Fluid Dynamic (CFD) methods were used to determine the basic aerodynamic, performance, and stability and control characteristics of the unmanned air vehicle (UAV), Kahu. Accurate and timely prediction of the aerodynamic characteristics of small UAVs is an essential part of military system acquisition and air-worthiness evaluations. The forces and moments of the UAV were predicted using a variety of analytical methods for a range of configurations and conditions. The methods included Navier Stokes (N-S) flow solvers (USM3D, Kestrel and Cobalt) that take days to set up and hours to converge on a single solution; potential flow methods (PMARC, LSAERO, and XFLR5) that take hours to set up and minutes to compute; empirical methods (Datcom) that involve table lookups and produce a solution quickly; and handbook calculations. A preliminary aerodynamic database can be developed very efficiently by using a combination of computational tools. The database can be generated with low-order and empirical methods in linear regions, then replacing or adjusting the data as predictions from higher order methods are obtained. A comparison of results from all the data sources as well as experimental data obtained from a wind-tunnel test will be shown and the methods will be evaluated on their utility during each portion of the flight envelope.

Surgeons' efficiency change is a major determinant of their productivity change.

Science.gov (United States)

Nakata, Yoshinori; Watanabe, Yuichi; Narimatsu, Hiroto; Yoshimura, Tatsuya; Otake, Hiroshi; Sawa, Tomohiro

2016-05-09

Purpose - The sustainability of the Japanese healthcare system is in question because the government has had a huge fiscal debt. Despite an enormous effort to cut the deficit, our healthcare expenditure is increasing every year because of the rapidly aging population. One of the solutions for this problem is to improve the productivity of healthcare. The purpose of this paper is to determine the factors that change surgeons' productivity in one year. Design/methodology/approach - The authors collected data of all surgical procedures performed at Teikyo University Hospital from April 1 through September 30 in 2014 and 2015, and computed the surgeons' Malmquist index (MI), efficiency change (EC) and technical change (TC) using non-radial and non-oriented Malmquist model under the constant returns-to-scale assumptions. The authors then divided the surgeons into two groups; one whose productivity progressed and the other whose productivity regressed. These two groups were compared to identify factors that may influence their MI. Findings - The only significant difference between the two groups was ECs (p productivity change. The best way to improve surgeons' productivity may be to enhance their efficiency regardless of their surgical volume and personal backgrounds.

Rapid behavioural gregarization in the desert locust, Schistocerca gregaria entails synchronous changes in both activity and attraction to conspecifics.

Science.gov (United States)

Rogers, Stephen M; Cullen, Darron A; Anstey, Michael L; Burrows, Malcolm; Despland, Emma; Dodgson, Tim; Matheson, Tom; Ott, Swidbert R; Stettin, Katja; Sword, Gregory A; Simpson, Stephen J

2014-06-01

Desert Locusts can change reversibly between solitarious and gregarious phases, which differ considerably in behaviour, morphology and physiology. The two phases show many behavioural differences including both overall levels of activity and the degree to which they are attracted or repulsed by conspecifics. Solitarious locusts perform infrequent bouts of locomotion characterised by a slow walking pace, groom infrequently and actively avoid other locusts. Gregarious locusts are highly active with a rapid walking pace, groom frequently and are attracted to conspecifics forming cohesive migratory bands as nymphs and/or flying swarms as adults. The sole factor driving the onset of gregarization is the presence of conspecifics. In several previous studies concerned with the mechanism underlying this transformation we have used an aggregate measure of behavioural phase state, Pgreg, derived from logistic regression analysis, which combines and weights several behavioural variables to characterise solitarious and gregarious behaviour. Using this approach we have analysed the time course of behavioural change, the stimuli that induce gregarization and the key role of serotonin in mediating the transformation. Following a recent critique that suggested that using Pgreg may confound changes in general activity with genuine gregarization we have performed a meta-analysis examining the time course of change in the individual behaviours that we use to generate Pgreg. We show that the forced crowding of solitarious locusts, tactile stimulation of the hind femora, and the short-term application of serotonin each induce concerted changes in not only locomotion-related variables but also grooming frequency and attraction to other locusts towards those characteristic of long-term gregarious locusts. This extensive meta-analysis supports and extends our previous conclusions that solitarious locusts undergo a rapid behavioural gregarization upon receiving appropriate stimulation for

Evaluation of atherosclerotic change of the aorta by enhanced computed tomography

International Nuclear Information System (INIS)

Takasu, Junichiro

1990-01-01

Intimal atherosclerotic changes of the aorta were quantified by enhanced computed tomography (enhanced CT) and were examined in terms of their relation to other atherosclerotic characteristics, including calcification and aortic pulse wave velocity, diameter of the aorta, and arteriosclerotic risk factors. A total of 413 subjects were studied, consisting of normal volunteers and patients with cardiovascular diseases. Enhanced CT revealed the atheromatous intima as a projecting and thickened wall. Thus, the ratio of the intimal atherosclerotic change to the whole round was determined in various aortic sites. The diameter of the aorta decreased in accordance with the location from the ascending aorta to aortic ending. The diameter of the infrarenal abdominal aorta was 1.5 times larger than that of the ascending aorta, irrespective of age. The diameter of each region of the aorta increased with advancing age; in the age group of 70 years or older, it was 1.5 times larger that that in the age group of 40 years or younger. The intimal change was noted in the middle descending thoracic aorta and infrarenal abdominal aorta. It was proportional to an increase in the aortic pulse wave velocity, the diameter of the aorta, and the intimal calcification. Intimal changes of the aorta were increased in cerebrovascular disease, ischemic heart disease, arteriosclerosis obliterans, hypertension and diabetes mellitus. In particular, hypertension accompanied by diabetes mellitus or high cholesterolemia tended to accelerate the intimal change. In conclusion, aortic intimal changes, as detected on enhanced CT, is useful for the noninvasive diagnosis of arteriosclerosis. (N.K.)

Computers in technical information transfer

Energy Technology Data Exchange (ETDEWEB)

Price, C.E.

1978-01-01

The use of computers in transferring scientific and technical information from its creation to its use is surveyed. The traditional publication and distribution processes for S and T literature in past years have been the vehicle for transfer, but computers have altered the process in phenomenal ways. Computers are used in literature publication through text editing and photocomposition applications. Abstracting and indexing services use computers for preparing their products, but the machine-readable document descriptions created for this purpose are input to a rapidly growing computerized information retrieval service industry. Computer use is making many traditional processes passe, and may eventually lead to a largely ''paperless'' information utility.

Europe's Southeastern Gateway: Responding to Rapidly Changing Patterns of World Shipping. The University's Role

Directory of Open Access Journals (Sweden)

Roger E. HAMLIN

2012-12-01

Full Text Available World trade and transportation are changing dramatically. Energy prices and transport sustainability concerns are reinvigorating ocean freighter shipping. An ever-increasing portion of trade is in containers, and container ships are getting larger quickly. Many ports, nations and continents are not keeping up with ship size increases putting them at a trade disadvantage. Major canals and seaways must also upgrade or be rendered obsolete, causing a change in the pattern of world trade. Ports have to do more than expand vessel size limits. Port regions must also invest in infrastructure that improves multi-modal access to the port and augments hand-off of containers to smaller seaway ships, trains and trucks. With heightened security and evolving emphasis on flexible and efficient logistics, ports must become high-tech logistics hubs with improved real-time data about port throughput. Constanţa, Romania provides an example of an attempt to respond to this rapid change. Near the Danube Delta, on the Black Sea, Constanţa offers a potential southeastern gateway to Europe for the Black Sea, the Eastern Mediterranean and beyond. Ships from Asia, entering via the Suez Canal can easily access Constanţa, and thus save more than ten days of shipping time for destinations in southeastern Europe compared to shipping through Rotterdam or Hamburg. But Constanţa needs to make all the improvements mentioned above. Universities have several roles in this endeavor, including identifying and forecasting trends, providing the technical knowledge to develop high-tech logistics hubs, pursing publicprivate partnerships for infrastructure development and offering training.

Research on OpenStack of open source cloud computing in colleges and universities’ computer room

Science.gov (United States)

Wang, Lei; Zhang, Dandan

2017-06-01

In recent years, the cloud computing technology has a rapid development, especially open source cloud computing. Open source cloud computing has attracted a large number of user groups by the advantages of open source and low cost, have now become a large-scale promotion and application. In this paper, firstly we briefly introduced the main functions and architecture of the open source cloud computing OpenStack tools, and then discussed deeply the core problems of computer labs in colleges and universities. Combining with this research, it is not that the specific application and deployment of university computer rooms with OpenStack tool. The experimental results show that the application of OpenStack tool can efficiently and conveniently deploy cloud of university computer room, and its performance is stable and the functional value is good.

Variation in bacterial ATP concentration during rapid changes in extracellular pH and implications for the activity of attached bacteria.

Science.gov (United States)

Albert, Lynal S; Brown, Derick G

2015-08-01

In this study we investigated the relationship between a rapid change in extracellular pH and the alteration of bacterial ATP concentration. This relationship is a key component of a hypothesis indicating that bacterial bioenergetics - the creation of ATP from ADP via a proton gradient across the cytoplasmic membrane - can be altered by the physiochemical charge-regulation effect, which results in a pH shift at the bacteria's surface upon adhesion to another surface. The bacterial ATP concentration was measured during a rapid change in extracellular pH from a baseline pH of 7.2 to pH values between 3.5 and 10.5. Experiments were conducted with four neutrophilic bacterial strains, including the Gram-negative Escherichia coli and Pseudomonas putida and the Gram-positive Bacillus subtilis and Staphylococcus epidermidis. A change in bulk pH produced an immediate response in bacterial ATP, demonstrating a direct link between changes in extracellular pH and cellular bioenergetics. In general, the shifts in ATP were similar across the four bacterial strains, with results following an exponential relationship between the extracellular pH and cellular ATP concentration. One exception occurred with S. epidermidis, where there was no variation in cellular ATP at acidic pH values, and this finding is consistent with this species' ability to thrive under acidic conditions. These results provide insight into obtaining a desired bioenergetic response in bacteria through (i) the application of chemical treatments to vary the local pH and (ii) the selection and design of surfaces resulting in local pH modification of attached bacteria via the charge-regulation effect. Copyright © 2015 Elsevier B.V. All rights reserved.

How to Build a Quantum Computer

Science.gov (United States)

Sanders, Barry C.

2017-11-01

Quantum computer technology is progressing rapidly with dozens of qubits and hundreds of quantum logic gates now possible. Although current quantum computer technology is distant from being able to solve computational problems beyond the reach of non-quantum computers, experiments have progressed well beyond simply demonstrating the requisite components. We can now operate small quantum logic processors with connected networks of qubits and quantum logic gates, which is a great stride towards functioning quantum computers. This book aims to be accessible to a broad audience with basic knowledge of computers, electronics and physics. The goal is to convey key notions relevant to building quantum computers and to present state-of-the-art quantum-computer research in various media such as trapped ions, superconducting circuits, photonics and beyond.

Group Projects and the Computer Science Curriculum

Science.gov (United States)

Joy, Mike

2005-01-01

Group projects in computer science are normally delivered with reference to good software engineering practice. The discipline of software engineering is rapidly evolving, and the application of the latest 'agile techniques' to group projects causes a potential conflict with constraints imposed by regulating bodies on the computer science…

Applications of Evolutionary Computation

NARCIS (Netherlands)

Mora, Antonio M.; Squillero, Giovanni; Di Chio, C; Agapitos, Alexandros; Cagnoni, Stefano; Cotta, Carlos; Fernández De Vega, F; Di Caro, G A; Drechsler, R.; Ekárt, A; Esparcia-Alcázar, Anna I.; Farooq, M; Langdon, W B; Merelo-Guervós, J.J.; Preuss, M; Richter, O.-M.H.; Silva, Sara; Sim$\\$~oes, A; Squillero, Giovanni; Tarantino, Ernesto; Tettamanzi, Andrea G B; Togelius, J; Urquhart, Neil; Uyar, A S; Yannakakis, G N; Smith, Stephen L; Caserta, Marco; Ramirez, Adriana; Voß, Stefan; Squillero, Giovanni; Burelli, Paolo; Mora, Antonio M.; Squillero, Giovanni; Jan, Mathieu; Matthias, M; Di Chio, C; Agapitos, Alexandros; Cagnoni, Stefano; Cotta, Carlos; Fernández De Vega, F; Di Caro, G A; Drechsler, R.; Ekárt, A; Esparcia-Alcázar, Anna I.; Farooq, M; Langdon, W B; Merelo-Guervós, J.J.; Preuss, M; Richter, O.-M.H.; Silva, Sara; Sim$\\$~oes, A; Squillero, Giovanni; Tarantino, Ernesto; Tettamanzi, Andrea G B; Togelius, J; Urquhart, Neil; Uyar, A S; Yannakakis, G N; Caserta, Marco; Ramirez, Adriana; Voß, Stefan; Squillero, Giovanni; Burelli, Paolo; Esparcia-Alcazar, Anna I; Silva, Sara; Agapitos, Alexandros; Cotta, Carlos; De Falco, Ivanoe; Cioppa, Antonio Della; Diwold, Konrad; Ekart, Aniko; Tarantino, Ernesto; Vega, Francisco Fernandez De; Burelli, Paolo; Sim, Kevin; Cagnoni, Stefano; Simoes, Anabela; Merelo, J.J.; Urquhart, Neil; Haasdijk, Evert; Zhang, Mengjie; Squillero, Giovanni; Eiben, A E; Tettamanzi, Andrea G B; Glette, Kyrre; Rohlfshagen, Philipp; Schaefer, Robert; Caserta, Marco; Ramirez, Adriana; Voß, Stefan

2015-01-01

The application of genetic and evolutionary computation to problems in medicine has increased rapidly over the past five years, but there are specific issues and challenges that distinguish it from other real-world applications. Obtaining reliable and coherent patient data, establishing the clinical

Responses of antennal campaniform sensilla to rapid temperature changes in ground beetles of the tribe platynini with different habitat preferences and daily activity rhythms.

Science.gov (United States)

Must, Anne; Merivee, Enno; Luik, Anne; Mänd, Marika; Heidemaa, Mikk

2006-05-01

Responses of temperature sensitive (cold) cells from the antenna of ground beetles (tribe Platynini) were compared in species with different ecological preferences and daily activity rhythms. Action potential rates were characterized at various temperatures (ranges 23-39 degrees C) and during rapid changes in it (Deltat=0.5-15 degrees C). The stationary firing frequencies were nearly twice as high in eurythermic open field ground beetles Agonum muelleri and Anchomenus dorsalis (firing rates ranging from 22 to 47imp/s) than in a stenothermic forest species Platynus assimilis. In the eurythermic species, the firing rate did not significantly depend on temperature (Anchomenus dorsalis range of 23-27 degrees C and Agonum muelleri range of 23-33 degrees C) but plots of firing rate versus temperature showed rapid declines when lethally high temperatures were approached. In contrast, a nearly linear decline of the firing rate/temperature curve was observed in Platynus assimilis. Responses to rapid temperature decreases were also considerably higher in eurythermic species. Both the peak frequency of the initial burst (maximum 420-650Hz) as well as the sustained discharge in the first 4s of the response were higher than in Platynus assimilis. Long silent periods, lasting up to several seconds, that occurred at the beginning of the response to rapid warming were significantly shorter in Agonum muelleri and Anchomenus dorsalis compared to Platynus assimilis. These findings suggest that the responses of thermoreceptors to temperature changes may be correlated with specific ecological preferences.

Computational Properties of the Hippocampus Increase the Efficiency of Goal-Directed Foraging through Hierarchical Reinforcement Learning

Directory of Open Access Journals (Sweden)

Eric Chalmers

2016-12-01

Full Text Available The mammalian brain is thought to use a version of Model-based Reinforcement Learning (MBRL to guide goal-directed behavior, wherein animals consider goals and make plans to acquire desired outcomes. However, conventional MBRL algorithms do not fully explain animals’ ability to rapidly adapt to environmental changes, or learn multiple complex tasks. They also require extensive computation, suggesting that goal-directed behavior is cognitively expensive. We propose here that key features of processing in the hippocampus support a flexible MBRL mechanism for spatial navigation that is computationally efficient and can adapt quickly to change. We investigate this idea by implementing a computational MBRL framework that incorporates features inspired by computational properties of the hippocampus: a hierarchical representation of space, forward sweeps through future spatial trajectories, and context-driven remapping of place cells. We find that a hierarchical abstraction of space greatly reduces the computational load (mental effort required for adaptation to changing environmental conditions, and allows efficient scaling to large problems. It also allows abstract knowledge gained at high levels to guide adaptation to new obstacles. Moreover, a context-driven remapping mechanism allows learning and memory of multiple tasks. Simulating dorsal or ventral hippocampal lesions in our computational framework qualitatively reproduces behavioral deficits observed in rodents with analogous lesions. The framework may thus embody key features of how the brain organizes model-based RL to efficiently solve navigation and other difficult tasks.

Multi-generational responses of a marine polychaete to a rapid change in seawater pCO2.

Science.gov (United States)

Rodríguez-Romero, Araceli; Jarrold, Michael D; Massamba-N'Siala, Gloria; Spicer, John I; Calosi, Piero

2016-10-01

Little is known of the capacity that marine metazoans have to evolve under rapid p CO 2 changes. Consequently, we reared a marine polychaete, Ophryotrocha labronica , previously cultured for approximately 33 generations under a low/variable pH regime, under elevated and low p CO 2 for six generations. The strain used was found to be tolerant to elevated p CO 2 conditions. In generations F1 and F2 females' fecundity was significantly lower in the low p CO 2 treatment. However, from generation F3 onwards there were no differences between p CO 2 treatments, indicating that trans-generational effects enabled the restoration and maintenance of reproductive output. Whilst the initial fitness recovery was likely driven by trans-generational plasticity (TGP), the results from reciprocal transplant assays, performed using F7 individuals, made it difficult to disentangle between whether TGP had persisted across multiple generations, or if evolutionary adaptation had occurred. Nonetheless, both are important mechanisms for persistence under climate change. Overall, our study highlights the importance of multi-generational experiments in more accurately determining marine metazoans' responses to changes in p CO 2 , and strengthens the case for exploring their use in conservation, by creating specific p CO 2 tolerant strains of keystone ecosystem species.

Optically stimulated luminescence sensitivity changes in quartz due to repeated use in single aliquot readout: Experiments and computer simulations

DEFF Research Database (Denmark)

McKeever, S.W.S.; Bøtter-Jensen, L.; Agersnap Larsen, N.

1996-01-01

believed to be occurring. The computer model used includes both shallow and deep ('hard-to-bleach') traps, OSL ('easy-to-bleach') traps, and radiative and non-radiative recombination centres. The model has previously been used successfully to account for sensitivity changes in quartz due to thermal......As part of a study to examine sensitivity changes in single aliquot techniques using optically stimulated luminescence (OSL) a series of experiments has been conducted with single aliquots of natural quartz, and the data compared with the results of computer simulations of the type of processes...... annealing. The simulations are able to reproduce qualitatively the main features of the experimental results including sensitivity changes as a function of reuse, and their dependence upon bleaching time and laboratory dose. The sensitivity changes are believed to be the result of a combination of shallow...

Immediate impact of rapid maxillary expansion on upper airway dimensions and on the quality of life of mouth breathers

Directory of Open Access Journals (Sweden)

Edna Namiko Izuka

2015-06-01

Full Text Available OBJECTIVE: To assess short-term tomographic changes in the upper airway dimensions and quality of life of mouth breathers after rapid maxillary expansion (RME. METHODS: A total of 25 mouth breathers with maxillary atresia and a mean age of 10.5 years old were assessed by means of cone-beam computed tomography (CBCT and a standardized quality of life questionnaire answered by patients' parents/legal guardians before and immediately after rapid maxillary expansion. RESULTS: Rapid maxillary expansion resulted in similar and significant expansion in the width of anterior (2.8 mm, p < 0.001 and posterior nasal floor (2.8 mm, p < 0.001. Although nasopharynx and nasal cavities airway volumes significantly increased (+1646.1 mm3, p < 0.001, oropharynx volume increase was not statistically significant (+1450.6 mm3, p = 0.066. The results of the quality of life questionnaire indicated that soon after rapid maxillary expansion, patients' respiratory symptoms significantly decreased in relation to their initial respiratory conditions. CONCLUSIONS: It is suggested that RME produces significant dimensional increase in the nasal cavity and nasopharynx. Additionally, it also positively impacts the quality of life of mouth-breathing patients with maxillary atresia.

Rapid Geophysical Surveyor

International Nuclear Information System (INIS)

Roybal, L.G.; Carpenter, G.S.; Josten, N.E.

1993-01-01

The Rapid Geophysical Surveyor (RGS) is a system designed to rapidly and economically collect closely-spaced geophysical data used for characterization of US Department of Energy waste sites. Geophysical surveys of waste sites are an important first step in the remediation and closure of these sites; especially older sites where historical records are inaccurate and survey benchmarks have changed because of refinements in coordinate controls and datum changes. Closely-spaced data are required to adequately differentiate pits, trenches, and soil vault rows whose edges may be only a few feet from each other. A prototype vehicle designed to collect magnetic field data was built at the Idaho National Engineering Laboratory (INEL) during the summer of 1992. The RGS was funded by the Buried Waste Integrated Demonstration program. This vehicle was demonstrated at the Subsurface Disposal Area (SDA) within the Radioactive Waste Management Complex at the INEL in September 1992. Magnetic data were collected over two areas in the SDA, with a total survey area of about 1.7 acres. Data were collected at a nominal density of 2 1/2 in. along survey lines spaced 1-ft apart. Over 350,000 data points were collected over a 6 day period corresponding to about 185 worker-days using conventional ground survey techniques

Rapid Fourier space solution of linear partial integro-differential equations in toroidal magnetic confinement geometries

International Nuclear Information System (INIS)

McMillan, B.F.; Jolliet, S.; Tran, T.M.; Villard, L.; Bottino, A.; Angelino, P.

2010-01-01

Fluctuating quantities in magnetic confinement geometries often inherit a strong anisotropy along the field lines. One technique for describing these structures is the use of a certain set of Fourier components on the tori of nested flux surfaces. We describe an implementation of this approach for solving partial differential equations, like Poisson's equation, where a different set of Fourier components may be chosen on each surface according to the changing safety factor profile. Allowing the resolved components to change to follow the anisotropy significantly reduces the total number of degrees of freedom in the description. This can permit large gains in computational performance. We describe, in particular, how this approach can be applied to rapidly solve the gyrokinetic Poisson equation in a particle code, ORB5 (Jolliet et al. (2007) [5]), with a regular (non-field-aligned) mesh. (authors)

Basic principles of cone beam computed tomography.

Science.gov (United States)

Abramovitch, Kenneth; Rice, Dwight D

2014-07-01

At the end of the millennium, cone-beam computed tomography (CBCT) heralded a new dental technology for the next century. Owing to the dramatic and positive impact of CBCT on implant dentistry and orthognathic/orthodontic patient care, additional applications for this technology soon evolved. New software programs were developed to improve the applicability of, and access to, CBCT for dental patients. Improved, rapid, and cost-effective computer technology, combined with the ability of software engineers to develop multiple dental imaging applications for CBCT with broad diagnostic capability, have played a large part in the rapid incorporation of CBCT technology into dentistry. Copyright © 2014 Elsevier Inc. All rights reserved.

Quantum Computation: Entangling with the Future

Science.gov (United States)

Jiang, Zhang

2017-01-01

Commercial applications of quantum computation have become viable due to the rapid progress of the field in the recent years. Efficient quantum algorithms are discovered to cope with the most challenging real-world problems that are too hard for classical computers. Manufactured quantum hardware has reached unprecedented precision and controllability, enabling fault-tolerant quantum computation. Here, I give a brief introduction on what principles in quantum mechanics promise its unparalleled computational power. I will discuss several important quantum algorithms that achieve exponential or polynomial speedup over any classical algorithm. Building a quantum computer is a daunting task, and I will talk about the criteria and various implementations of quantum computers. I conclude the talk with near-future commercial applications of a quantum computer.

What are the visual features underlying rapid object recognition?

Directory of Open Access Journals (Sweden)

Sébastien M Crouzet

2011-11-01

Full Text Available Research progress in machine vision has been very significant in recent years. Robust face detection and identification algorithms are already readily available to consumers, and modern computer vision algorithms for generic object recognition are now coping with the richness and complexity of natural visual scenes. Unlike early vision models of object recognition that emphasized the role of figure-ground segmentation and spatial information between parts, recent successful approaches are based on the computation of loose collections of image features without prior segmentation or any explicit encoding of spatial relations. While these models remain simplistic models of visual processing, they suggest that, in principle, bottom-up activation of a loose collection of image features could support the rapid recognition of natural object categories and provide an initial coarse visual representation before more complex visual routines and attentional mechanisms take place. Focusing on biologically-plausible computational models of (bottom-up pre-attentive visual recognition, we review some of the key visual features that have been described in the literature. We discuss the consistency of these feature-based representations with classical theories from visual psychology and test their ability to account for human performance on a rapid object categorization task.

Structural Changes in Stx1 Engineering Monoclonal Antibody Improves Its Functionality as Diagnostic Tool for a Rapid Latex Agglutination Test

Directory of Open Access Journals (Sweden)

Daniela Luz

2018-02-01

Full Text Available Stx1 toxin is one of the AB5 toxins of Shiga toxin-producing Escherichia coli (STEC responsible for foodborne intoxication during outbreaks. The single-chain variable fragment (scFv is the most common recombinant antibody format; it consists of both variable chains connected by a peptide linker with conserved specificity and affinity for antigen. The drawbacks of scFv production in bacteria are the heterologous expression, conformation and stability of the molecule, which could change the affinity for the antigen. In this work, we obtained a stable and functional scFv-Stx1 in bacteria, starting from IgG produced by hybridoma cells. After structural modifications, i.e., change in protein orientation, vector and linker, its solubility for expression in bacteria was increased as well as the affinity for its antigen, demonstrated by a scFv dissociation constant (KD of 2.26 × 10−7 M. Also, it was able to recognize purified Stx1 and cross-reacted with Stx2 toxin by ELISA (Enzyme-Linked Immunosorbent Assay, and detected 88% of Stx1-producing strains using a rapid latex agglutination test. Thus, the scFv fragment obtained in the present work is a bacteria-produced tool for use in a rapid diagnosis test, providing an alternative for STEC diagnosis.

[Computational medical imaging (radiomics) and potential for immuno-oncology].

Science.gov (United States)

Sun, R; Limkin, E J; Dercle, L; Reuzé, S; Zacharaki, E I; Chargari, C; Schernberg, A; Dirand, A S; Alexis, A; Paragios, N; Deutsch, É; Ferté, C; Robert, C

2017-10-01

The arrival of immunotherapy has profoundly changed the management of multiple cancers, obtaining unexpected tumour responses. However, until now, the majority of patients do not respond to these new treatments. The identification of biomarkers to determine precociously responding patients is a major challenge. Computational medical imaging (also known as radiomics) is a promising and rapidly growing discipline. This new approach consists in the analysis of high-dimensional data extracted from medical imaging, to further describe tumour phenotypes. This approach has the advantages of being non-invasive, capable of evaluating the tumour and its microenvironment in their entirety, thus characterising spatial heterogeneity, and being easily repeatable over time. The end goal of radiomics is to determine imaging biomarkers as decision support tools for clinical practice and to facilitate better understanding of cancer biology, allowing the assessment of the changes throughout the evolution of the disease and the therapeutic sequence. This review will develop the process of computational imaging analysis and present its potential in immuno-oncology. Copyright © 2017 Société française de radiothérapie oncologique (SFRO). Published by Elsevier SAS. All rights reserved.

Medical rehabilitation in low and middle income countries for adult acquired disability: challenges posed by rapidity of health system change and position on the individualistic-collectivist axis

Directory of Open Access Journals (Sweden)

Karl Sandin

2015-01-01

Full Text Available Chronic illness prevalence has rapidly increased in low or middle income countries (LMIC and with it, the need for medical rehabilitation for adults with acquired conditions that stem from aging and long-term conditions. While Western medical rehabilitation programs have had at least two generations to develop, in LMIC, post-acute health care delivery change has been much more rapid. As a result, there has been little opportunity for models of medical rehabilitation to deliberately emerge in LMIC that reflect societal values. While adaptation of an independence-foremost model of medical rehabilitation may succeed in non-Western societies, there is a risk that adaptation of such a model will be ineffective where many value collectivism more than individualism. The rapid change in medical rehabilitation service delivery in LMIC gives Christian providers and organizations an opportunity to pause and reflect whether the dominant Western medical rehabilitation paradigm serves LMIC cultures and reflects Biblical principles.

Rapid earthquake magnitude determination for Vrancea early warning system

International Nuclear Information System (INIS)

Marmureanu, Alexandru

2009-01-01

Due to the huge amount of recorded data, an automatic procedure was developed and used to test different methods to rapidly evaluate earthquake magnitude from the first seconds of the P wave. In order to test all the algorithms involved in detection and rapid earthquake magnitude estimation, several tests were performed, in order to avoid false alarms. A special detection algorithm was developed, that is based on the classical STA/LTA algorithm and tuned for early warning purpose. A method to rapidly estimate magnitude in 4 seconds from detection of P wave in the epicenter is proposed. The method was tested on al recorded data, and the magnitude error determination is acceptable taking into account that it is computed from only 3 stations in a very short time interval. (author)

Knowledge-based computer security advisor

International Nuclear Information System (INIS)

Hunteman, W.J.; Squire, M.B.

1991-01-01

The rapid expansion of computer security information and technology has included little support to help the security officer identify the safeguards needed to comply with a policy and to secure a computing system. This paper reports that Los Alamos is developing a knowledge-based computer security system to provide expert knowledge to the security officer. This system includes a model for expressing the complex requirements in computer security policy statements. The model is part of an expert system that allows a security officer to describe a computer system and then determine compliance with the policy. The model contains a generic representation that contains network relationships among the policy concepts to support inferencing based on information represented in the generic policy description

Fifty years of computer analysis in chest imaging: rule-based, machine learning, deep learning.

Science.gov (United States)

van Ginneken, Bram

2017-03-01

Half a century ago, the term "computer-aided diagnosis" (CAD) was introduced in the scientific literature. Pulmonary imaging, with chest radiography and computed tomography, has always been one of the focus areas in this field. In this study, I describe how machine learning became the dominant technology for tackling CAD in the lungs, generally producing better results than do classical rule-based approaches, and how the field is now rapidly changing: in the last few years, we have seen how even better results can be obtained with deep learning. The key differences among rule-based processing, machine learning, and deep learning are summarized and illustrated for various applications of CAD in the chest.

Computer assisted analysis of medical x-ray images

Science.gov (United States)

Bengtsson, Ewert

1996-01-01

X-rays were originally used to expose film. The early computers did not have enough capacity to handle images with useful resolution. The rapid development of computer technology over the last few decades has, however, led to the introduction of computers into radiology. In this overview paper, the various possible roles of computers in radiology are examined. The state of the art is briefly presented, and some predictions about the future are made.

Rapid prototyping of soil moisture estimates using the NASA Land Information System

Science.gov (United States)

Anantharaj, V.; Mostovoy, G.; Li, B.; Peters-Lidard, C.; Houser, P.; Moorhead, R.; Kumar, S.

2007-12-01

The Land Information System (LIS), developed at the NASA Goddard Space Flight Center, is a functional Land Data Assimilation System (LDAS) that incorporates a suite of land models in an interoperable computational framework. LIS has been integrated into a computational Rapid Prototyping Capabilities (RPC) infrastructure. LIS consists of a core, a number of community land models, data servers, and visualization systems - integrated in a high-performance computing environment. The land surface models (LSM) in LIS incorporate surface and atmospheric parameters of temperature, snow/water, vegetation, albedo, soil conditions, topography, and radiation. Many of these parameters are available from in-situ observations, numerical model analysis, and from NASA, NOAA, and other remote sensing satellite platforms at various spatial and temporal resolutions. The computational resources, available to LIS via the RPC infrastructure, support e- Science experiments involving the global modeling of land-atmosphere studies at 1km spatial resolutions as well as regional studies at finer resolutions. The Noah Land Surface Model, available with-in the LIS is being used to rapidly prototype soil moisture estimates in order to evaluate the viability of other science applications for decision making purposes. For example, LIS has been used to further extend the utility of the USDA Soil Climate Analysis Network of in-situ soil moisture observations. In addition, LIS also supports data assimilation capabilities that are used to assimilate remotely sensed soil moisture retrievals from the AMSR-E instrument onboard the Aqua satellite. The rapid prototyping of soil moisture estimates using LIS and their applications will be illustrated during the presentation.

Multifrequency Excitation Method for Rapid and Accurate Dynamic Test of Micromachined Gyroscope Chips

Directory of Open Access Journals (Sweden)

Yan Deng

2014-10-01

Full Text Available A novel multifrequency excitation (MFE method is proposed to realize rapid and accurate dynamic testing of micromachined gyroscope chips. Compared with the traditional sweep-frequency excitation (SFE method, the computational time for testing one chip under four modes at a 1-Hz frequency resolution and 600-Hz bandwidth was dramatically reduced from 10 min to 6 s. A multifrequency signal with an equal amplitude and initial linear-phase-difference distribution was generated to ensure test repeatability and accuracy. The current test system based on LabVIEW using the SFE method was modified to use the MFE method without any hardware changes. The experimental results verified that the MFE method can be an ideal solution for large-scale dynamic testing of gyroscope chips and gyroscopes.

Characteristics of products generated by selective sintering and stereolithography rapid prototyping processes

Science.gov (United States)

Cariapa, Vikram

1993-01-01

The trend in the modern global economy towards free market policies has motivated companies to use rapid prototyping technologies to not only reduce product development cycle time but also to maintain their competitive edge. A rapid prototyping technology is one which combines computer aided design with computer controlled tracking of focussed high energy source (eg. lasers, heat) on modern ceramic powders, metallic powders, plastics or photosensitive liquid resins in order to produce prototypes or models. At present, except for the process of shape melting, most rapid prototyping processes generate products that are only dimensionally similar to those of the desired end product. There is an urgent need, therefore, to enhance the understanding of the characteristics of these processes in order to realize their potential for production. Currently, the commercial market is dominated by four rapid prototyping processes, namely selective laser sintering, stereolithography, fused deposition modelling and laminated object manufacturing. This phase of the research has focussed on the selective laser sintering and stereolithography rapid prototyping processes. A theoretical model for these processes is under development. Different rapid prototyping sites supplied test specimens (based on ASTM 638-84, Type I) that have been measured and tested to provide a data base on surface finish, dimensional variation and ultimate tensile strength. Further plans call for developing and verifying the theoretical models by carefully designed experiments. This will be a joint effort between NASA and other prototyping centers to generate a larger database, thus encouraging more widespread usage by product designers.

Brief: Managing computing technology

International Nuclear Information System (INIS)

Startzman, R.A.

1994-01-01

While computing is applied widely in the production segment of the petroleum industry, its effective application is the primary goal of computing management. Computing technology has changed significantly since the 1950's, when computers first began to influence petroleum technology. The ability to accomplish traditional tasks faster and more economically probably is the most important effect that computing has had on the industry. While speed and lower cost are important, are they enough? Can computing change the basic functions of the industry? When new computing technology is introduced improperly, it can clash with traditional petroleum technology. This paper examines the role of management in merging these technologies

Rapid Ice-Sheet Changes and Mechanical Coupling to Solid-Earth/Sea-Level and Space Geodetic Observation

Science.gov (United States)

Adhikari, S.; Ivins, E. R.; Larour, E. Y.

2015-12-01

Perturbations in gravitational and rotational potentials caused by climate driven mass redistribution on the earth's surface, such as ice sheet melting and terrestrial water storage, affect the spatiotemporal variability in global and regional sea level. Here we present a numerically accurate, computationally efficient, high-resolution model for sea level. Unlike contemporary models that are based on spherical-harmonic formulation, the model can operate efficiently in a flexible embedded finite-element mesh system, thus capturing the physics operating at km-scale yet capable of simulating geophysical quantities that are inherently of global scale with minimal computational cost. One obvious application is to compute evolution of sea level fingerprints and associated geodetic and astronomical observables (e.g., geoid height, gravity anomaly, solid-earth deformation, polar motion, and geocentric motion) as a companion to a numerical 3-D thermo-mechanical ice sheet simulation, thus capturing global signatures of climate driven mass redistribution. We evaluate some important time-varying signatures of GRACE inferred ice sheet mass balance and continental hydrological budget; for example, we identify dominant sources of ongoing sea-level change at the selected tide gauge stations, and explain the relative contribution of different sources to the observed polar drift. We also report our progress on ice-sheet/solid-earth/sea-level model coupling efforts toward realistic simulation of Pine Island Glacier over the past several hundred years.

Rapid deuterium exchange-in time for probing conformational change

International Nuclear Information System (INIS)

Dharmasiri, K.; Smith, D.L.

1995-01-01

Isotopic exchange of protein backbone amide hydrogens has been used extensively as a sensitive probe of protein structure. One of the salient features of hydrogen exchange is the vast range of exchange rates in one protein. Isotopic exchange methods have been used to study the structural features including protein folding and unfolding (1), functionally different forms of proteins (2), protein-protein complexation (3), and protein stability parameter. Many backbone amide protons that are surface accessible and are not involved in hydrogen bonding undergo rapid deuterium exchange. In order to study, fast exchanging amide protons, fast exchange-in times are necessary

Portable rapid gas content measurement - an opportunity for a step change in the coal industry?

International Nuclear Information System (INIS)

Beamish, Basil; Kizil, Mehmet; Gu, Ming

2013-01-01

The last major advance in gas content measurement for coal seams was the introduction of the quick crush technique in the early 1990s. This is a laboratory test method that has proven very reliable over the years. Recent laboratory testing using a portable quick crushing device, known as the portable gas content analyser, has produced consistent gas content results for a set of core samples obtained from a single borehole that intersected four coal seams. The retained gas content values obtained for the seams show the same increasing gas content pattern and gas composition change with depth as the standard quick crush technique. Use of the portable gas content analyser provides the opportunity to produce rapid, reliable gas content measurement of coal that could be developed for assessing gas compliance cores and outburst-prone conditions at a mine site.

Optically stimulated luminescence sensitivity changes in quartz due to repeated use in single aliquot readout: experiments and computer simulations

International Nuclear Information System (INIS)

McKeever, S.W.S.; Oklahoma State Univ., Stillwater, OK; Boetter-Jensen, L.; Agersnap Larsen, N.; Mejdahl, V.; Poolton, N.R.J.

1996-01-01

As part of a study to examine sensitivity changes in single aliquot techniques using optically stimulated luminescence (OSL) a series of experiments has been conducted with single aliquots of natural quartz, and the data compared with the results of computer simulations of the type of processes believed to be occurring. The computer model used includes both shallow and deep ('hard-to-bleach') traps, OSL ('easy-to-bleach') traps, and radiative and non-radiative recombination centres. The model has previously been used successfully to account for sensitivity changes in quartz due to thermal annealing. The simulations are able to reproduce qualitatively the main features of the experimental results including sensitivity changes as a function of re-use, and their dependence upon bleaching time and laboratory dose. The sensitivity changes are believed to be the result of a combination of shallow trap and deep trap effects. (author)

Water System Adaptation To Hydrological Changes: Module 5, Water Quality and Infrastructure Response to Rapid Urbanization: Adaptation Case Study in China

Science.gov (United States)

This course will introduce students to the fundamental principles of water system adaptation to hydrological changes, with emphasis on data analysis and interpretation, technical planning, and computational modeling. Starting with real-world scenarios and adaptation needs, the co...

Rapid realist review of the evidence: achieving lasting change when mental health rehabilitation staff undertake recovery-oriented training.

Science.gov (United States)

Gee, Melanie; Bhanbhro, Sadiq; Cook, Sarah; Killaspy, Helen

2017-08-01

The aim of this study was to identify the factors contributing to lasting change in practice following a recovery-based training intervention for inpatient mental health rehabilitation staff. Staff training may help nurses and other staff groups in inpatient mental health rehabilitative settings to increase their recovery-oriented practice. There are no published reviews on the effectiveness of such training and few long-term evaluations. This review informed a realist evaluation of a specific intervention (GetREAL). Rapid realist review methodology was used to generate and prioritize programme theories. ASSIA, CINAHL, Cochrane Library, Medline, PsycINFO, Scopus, Web of Science and grey literature searches were performed in September 2014-March 2015 with no date restrictions. Stakeholders suggested further documents. GetREAL project documentation was consulted. Programme theory development took place iteratively with literature identification. Stakeholders validated and prioritized emerging programme theories and the prioritized theories were refined using literature case studies. Fifty-one relevant documents fed into 49 programme theories articulating seven mechanisms for lasting change. Prioritized mechanisms were: staff receptiveness to change; and staff feeling encouraged, motivated and supported by colleagues and management to change. Seven programme theories were prioritized and refined using data from four case studies. Lasting change can be facilitated by collaborative action planning, regular collaborative meetings, appointing a change agent, explicit management endorsement and prioritization and modifying organizational structures. Conversely, a challenging organizational climate, or a prevalence of 'change fatigue', may block change. Pre-intervention exploration may help identify any potential barriers to embedding recovery in the organizational culture. © 2016 John Wiley & Sons Ltd.

A review of rapid prototyping techniques for tissue engineering purposes

NARCIS (Netherlands)

Peltola, Sanna M.; Melchels, Ferry P. W.; Grijpma, Dirk W.; Kellomaki, Minna

2008-01-01

Rapid prototyping (RP) is a common name for several techniques, which read in data from computer-aided design (CAD) drawings and manufacture automatically three-dimensional objects layer-by-layer according to the virtual design. The utilization of RP in tissue engineering enables the production of

Sharing Elderly Healthcare information on Cloud Computing

OpenAIRE

Lu, Fangjie; Khan, Israr

2012-01-01

Context: Due to rapid increase in the population of elderly people, sharing healthcare information has become an essential requirement for the development of e-health system. By conducting a research in e-health and cloud computing we have explored the advantages and disadvantages of sharing healthcare information for elderly people through cloud computing. Objectives: The main purpose of this research is to investigate the suitability of cloud computing to share healthcare information. The s...

Decomposition recovery extension to the Computer Aided Prototyping System (CAPS) change-merge tool.

OpenAIRE

Keesling, William Ronald

1997-01-01

Approved for public release; distribution is unlimited A promising use of Computer Aided Prototyping System (CAPS) is to support concurrent design. Key to success in this context is the ability to automatically and reliably combine and integrate the prototypes produced in concurrent efforts. Thus, to be of practical use in this as well as most prototyping contexts, a CAPS tool must have a fast, automated, reliable prototype integration capability. The current CAPS Change Merge Tool is fast...

Formation of luminous contact binaries by rapid accretion onto white dwarfs

International Nuclear Information System (INIS)

Nomoto, K.; Nariai, K.; Sugimoto, D.

1980-01-01

During the evolution of a close binary system, there is a phase of mass exchange between its component stars. The authors investigate what happens in the case of extremely rapid accretion onto a white dwarf. They have computed the whole processes of mass accretion starting from its onset through the shell flash and further mass accumulation. Throughout the computation the effect of gravitational energy release has been correctly taken into account. (Auth.)

Interactive Rapid Dose Assessment Model (IRDAM): reactor-accident assessment methods. Vol.2

International Nuclear Information System (INIS)

Poeton, R.W.; Moeller, M.P.; Laughlin, G.J.; Desrosiers, A.E.

1983-05-01

As part of the continuing emphasis on emergency preparedness, the US Nuclear Regulatory Commission (NRC) sponsored the development of a rapid dose assessment system by Pacific Northwest Laboratory (PNL). This system, the Interactive Rapid Dose Assessment Model (IRDAM) is a micro-computer based program for rapidly assessing the radiological impact of accidents at nuclear power plants. This document describes the technical bases for IRDAM including methods, models and assumptions used in calculations. IRDAM calculates whole body (5-cm depth) and infant thyroid doses at six fixed downwind distances between 500 and 20,000 meters. Radionuclides considered primarily consist of noble gases and radioiodines. In order to provide a rapid assessment capability consistent with the capacity of the Osborne-1 computer, certain simplifying approximations and assumptions are made. These are described, along with default values (assumptions used in the absence of specific input) in the text of this document. Two companion volumes to this one provide additional information on IRDAM. The user's Guide (NUREG/CR-3012, Volume 1) describes the setup and operation of equipment necessary to run IRDAM. Scenarios for Comparing Dose Assessment Models (NUREG/CR-3012, Volume 3) provides the results of calculations made by IRDAM and other models for specific accident scenarios

Computational intelligence in biomedical imaging

CERN Document Server

2014-01-01

This book provides a comprehensive overview of the state-of-the-art computational intelligence research and technologies in biomedical images with emphasis on biomedical decision making. Biomedical imaging offers useful information on patients’ medical conditions and clues to causes of their symptoms and diseases. Biomedical images, however, provide a large number of images which physicians must interpret. Therefore, computer aids are demanded and become indispensable in physicians’ decision making. This book discusses major technical advancements and research findings in the field of computational intelligence in biomedical imaging, for example, computational intelligence in computer-aided diagnosis for breast cancer, prostate cancer, and brain disease, in lung function analysis, and in radiation therapy. The book examines technologies and studies that have reached the practical level, and those technologies that are becoming available in clinical practices in hospitals rapidly such as computational inte...

Long-term changes of information environments and computer anxiety of nurse administrators in Japan.

Science.gov (United States)

Majima, Yukie; Izumi, Takako

2013-01-01

In Japan, medical information systems, including electronic medical records, are being introduced increasingly at medical and nursing fields. Nurse administrators, who are involved in the introduction of medical information systems and who must make proper judgment, are particularly required to have at least minimal knowledge of computers and networks and the ability to think about easy-to-use medical information systems. However, few of the current generation of nurse administrators studied information science subjects in their basic education curriculum. It can be said that information education for nurse administrators has become a pressing issue. Consequently, in this study, we conducted a survey of participants taking the first level program of the education course for Japanese certified nurse administrators to ascertain the actual conditions, such as the information environments that nurse administrators are in, their anxiety attitude to computers. Comparisons over the seven years since 2004 revealed that although introduction of electronic medical records in hospitals was progressing, little change in attributes of participants taking the course was observed, such as computer anxiety.

A Spread Willingness Computing-Based Information Dissemination Model

Science.gov (United States)

Cui, Zhiming; Zhang, Shukui

2014-01-01

This paper constructs a kind of spread willingness computing based on information dissemination model for social network. The model takes into account the impact of node degree and dissemination mechanism, combined with the complex network theory and dynamics of infectious diseases, and further establishes the dynamical evolution equations. Equations characterize the evolutionary relationship between different types of nodes with time. The spread willingness computing contains three factors which have impact on user's spread behavior: strength of the relationship between the nodes, views identity, and frequency of contact. Simulation results show that different degrees of nodes show the same trend in the network, and even if the degree of node is very small, there is likelihood of a large area of information dissemination. The weaker the relationship between nodes, the higher probability of views selection and the higher the frequency of contact with information so that information spreads rapidly and leads to a wide range of dissemination. As the dissemination probability and immune probability change, the speed of information dissemination is also changing accordingly. The studies meet social networking features and can help to master the behavior of users and understand and analyze characteristics of information dissemination in social network. PMID:25110738

A Spread Willingness Computing-Based Information Dissemination Model

Directory of Open Access Journals (Sweden)

Haojing Huang

2014-01-01

Full Text Available This paper constructs a kind of spread willingness computing based on information dissemination model for social network. The model takes into account the impact of node degree and dissemination mechanism, combined with the complex network theory and dynamics of infectious diseases, and further establishes the dynamical evolution equations. Equations characterize the evolutionary relationship between different types of nodes with time. The spread willingness computing contains three factors which have impact on user’s spread behavior: strength of the relationship between the nodes, views identity, and frequency of contact. Simulation results show that different degrees of nodes show the same trend in the network, and even if the degree of node is very small, there is likelihood of a large area of information dissemination. The weaker the relationship between nodes, the higher probability of views selection and the higher the frequency of contact with information so that information spreads rapidly and leads to a wide range of dissemination. As the dissemination probability and immune probability change, the speed of information dissemination is also changing accordingly. The studies meet social networking features and can help to master the behavior of users and understand and analyze characteristics of information dissemination in social network.

Characteristics of multiprocessing MCNP5 on small personal computer clusters

International Nuclear Information System (INIS)

Robinson, S M; Mc Conn, R J Jr; Pagh, R T; Schweppe, J E; Siciliano, E R

2006-01-01

The feasibility and efficiency of performing MCNP5 calculations with a small, heterogeneous computing cluster built from Microsoft ( R) Windows TM personal computers (PC) are explored. The performance increases that may be expected with such clusters are estimated for cases that typify general radiation-shielding calculations. Our results show that the speed increase from additional slave PCs is nearly linear up to 10 processors. Guidance is given as to the specific advantages of changing various parameters present in the system. Implementing load balancing, and reducing the overhead from the MCNP rendezvous mechanism add to heterogeneous cluster efficiency. Hyper-threading technology and matching the total number of slave processes to the total number of logical processors also yield modest speed increases in the range below 7 processors. Because of the ease of acquisition of heterogeneous desktop computers, and the peak in efficiency at the level of a few physical processors, a strong case is made for the use of small clusters as a tool for producing MCNP5 calculations rapidly, and detailed instructions for constructing such clusters are provided

New computational method for non-LTE, the linear response matrix

International Nuclear Information System (INIS)

Fournier, K.B.; Grasiani, F.R.; Harte, J.A.; Libby, S.B.; More, R.M.; Zimmerman, G.B.

1998-01-01

My coauthors have done extensive theoretical and computational calculations that lay the ground work for a linear response matrix method to calculate non-LTE (local thermodynamic equilibrium) opacities. I will give briefly review some of their work and list references. Then I will describe what has been done to utilize this theory to create a computational package to rapidly calculate mild non-LTE emission and absorption opacities suitable for use in hydrodynamic calculations. The opacities are obtained by performing table look-ups on data that has been generated with a non-LTE package. This scheme is currently under development. We can see that it offers a significant computational speed advantage. It is suitable for mild non-LTE, quasi-steady conditions. And it offers a new insertion path for high-quality non-LTE data. Currently, the linear response matrix data file is created using XSN. These data files could be generated by more detailed and rigorous calculations without changing any part of the implementation in the hydro code. The scheme is running in Lasnex and is being tested and developed

Coping with distributed computing

International Nuclear Information System (INIS)

Cormell, L.

1992-09-01

The rapid increase in the availability of high performance, cost-effective RISC/UNIX workstations has been both a blessing and a curse. The blessing of having extremely powerful computing engines available on the desk top is well-known to many users. The user has tremendous freedom, flexibility, and control of his environment. That freedom can, however, become the curse of distributed computing. The user must become a system manager to some extent, he must worry about backups, maintenance, upgrades, etc. Traditionally these activities have been the responsibility of a central computing group. The central computing group, however, may find that it can no longer provide all of the traditional services. With the plethora of workstations now found on so many desktops throughout the entire campus or lab, the central computing group may be swamped by support requests. This talk will address several of these computer support and management issues by providing some examples of the approaches taken at various HEP institutions. In addition, a brief review of commercial directions or products for distributed computing and management will be given

Audiovisual Simultaneity Judgment and Rapid Recalibration throughout the Lifespan.

Science.gov (United States)

Noel, Jean-Paul; De Niear, Matthew; Van der Burg, Erik; Wallace, Mark T

2016-01-01

Multisensory interactions are well established to convey an array of perceptual and behavioral benefits. One of the key features of multisensory interactions is the temporal structure of the stimuli combined. In an effort to better characterize how temporal factors influence multisensory interactions across the lifespan, we examined audiovisual simultaneity judgment and the degree of rapid recalibration to paired audiovisual stimuli (Flash-Beep and Speech) in a sample of 220 participants ranging from 7 to 86 years of age. Results demonstrate a surprisingly protracted developmental time-course for both audiovisual simultaneity judgment and rapid recalibration, with neither reaching maturity until well into adolescence. Interestingly, correlational analyses revealed that audiovisual simultaneity judgments (i.e., the size of the audiovisual temporal window of simultaneity) and rapid recalibration significantly co-varied as a function of age. Together, our results represent the most complete description of age-related changes in audiovisual simultaneity judgments to date, as well as being the first to describe changes in the degree of rapid recalibration as a function of age. We propose that the developmental time-course of rapid recalibration scaffolds the maturation of more durable audiovisual temporal representations.

When cloud computing meets bioinformatics: a review.

Science.gov (United States)

Zhou, Shuigeng; Liao, Ruiqi; Guan, Jihong

2013-10-01

In the past decades, with the rapid development of high-throughput technologies, biology research has generated an unprecedented amount of data. In order to store and process such a great amount of data, cloud computing and MapReduce were applied to many fields of bioinformatics. In this paper, we first introduce the basic concepts of cloud computing and MapReduce, and their applications in bioinformatics. We then highlight some problems challenging the applications of cloud computing and MapReduce to bioinformatics. Finally, we give a brief guideline for using cloud computing in biology research.

Modeling Workflow Management in a Distributed Computing System ...

African Journals Online (AJOL)

Distributed computing is becoming increasingly important in our daily life. This is because it enables the people who use it to share information more rapidly and increases their productivity. A major characteristic feature or distributed computing is the explicit representation of process logic within a communication system, ...

Two-loop beam and soft functions for rapidity-dependent jet vetoes

Energy Technology Data Exchange (ETDEWEB)

Gangal, Shireen [Theory Group, Deutsches Elektronen-Synchrotron (DESY),Notkestraße 85, D-22607 Hamburg (Germany); Gaunt, Jonathan R. [Nikhef Theory Group and VU University Amsterdam,De Boelelaan 1081, NL-1081 HV Amsterdam (Netherlands); Stahlhofen, Maximilian [PRISMA Cluster of Excellence, Institute of Physics, Johannes Gutenberg University,Staudingerweg 7, D-55128 Mainz (Germany); Tackmann, Frank J. [Theory Group, Deutsches Elektronen-Synchrotron (DESY),Notkestraße 85, D-22607 Hamburg (Germany)

2017-02-06

Jet vetoes play an important role in many analyses at the LHC. Traditionally, jet vetoes have been imposed using a restriction on the transverse momentum p{sub Tj} of jets. Alternatively, one can also consider jet observables for which p{sub Tj} is weighted by a smooth function of the jet rapidity y{sub j} that vanishes as |y{sub j}|→∞. Such observables are useful as they provide a natural way to impose a tight veto on central jets but a looser one at forward rapidities. We consider two such rapidity-dependent jet veto observables, T{sub Bj} and T{sub Cj}, and compute the required beam and dijet soft functions for the jet-vetoed color-singlet production cross section at two loops. At this order, clustering effects from the jet algorithm become important. The dominant contributions are computed fully analytically while corrections that are subleading in the limit of small jet radii are expressed in terms of finite numerical integrals. Our results enable the full NNLL{sup ′} resummation and are an important step towards N{sup 3}LL resummation for cross sections with a T{sub Bj} or T{sub Cj} jet veto.

Policy options to respond to rapid climate change

NARCIS (Netherlands)

Swart, R.J.; Marinova, N.A.; Bakker, S.; Tilburg, van X.

2009-01-01

Ongoing research on climate change indicates that we cannot rule out the possibility of extreme climatic changes, beyond current IPCC scenarios. The thinking about policy responses to address these risks is still in its infancy. This study explores the possibilities for responding to extreme

A new oxidation flow reactor for measuring secondary aerosol formation of rapidly changing emission sources

Science.gov (United States)

Simonen, Pauli; Saukko, Erkka; Karjalainen, Panu; Timonen, Hilkka; Bloss, Matthew; Aakko-Saksa, Päivi; Rönkkö, Topi; Keskinen, Jorma; Dal Maso, Miikka

2017-04-01

Oxidation flow reactors (OFRs) or environmental chambers can be used to estimate secondary aerosol formation potential of different emission sources. Emissions from anthropogenic sources, such as vehicles, often vary on short timescales. For example, to identify the vehicle driving conditions that lead to high potential secondary aerosol emissions, rapid oxidation of exhaust is needed. However, the residence times in environmental chambers and in most oxidation flow reactors are too long to study these transient effects ( ˜ 100 s in flow reactors and several hours in environmental chambers). Here, we present a new oxidation flow reactor, TSAR (TUT Secondary Aerosol Reactor), which has a short residence time ( ˜ 40 s) and near-laminar flow conditions. These improvements are achieved by reducing the reactor radius and volume. This allows studying, for example, the effect of vehicle driving conditions on the secondary aerosol formation potential of the exhaust. We show that the flow pattern in TSAR is nearly laminar and particle losses are negligible. The secondary organic aerosol (SOA) produced in TSAR has a similar mass spectrum to the SOA produced in the state-of-the-art reactor, PAM (potential aerosol mass). Both reactors produce the same amount of mass, but TSAR has a higher time resolution. We also show that TSAR is capable of measuring the secondary aerosol formation potential of a vehicle during a transient driving cycle and that the fast response of TSAR reveals how different driving conditions affect the amount of formed secondary aerosol. Thus, TSAR can be used to study rapidly changing emission sources, especially the vehicular emissions during transient driving.

Pulmonary mucormycosis. Serial morphologic changes on computed tomography correlate with clinical and pathologic findings

International Nuclear Information System (INIS)

Nam, Bo Da; Kim, Tae Jung; Lee, Kyung Soo; Kim, Tae Sung; Chung, Myung Jin; Han, Joungho

2018-01-01

To evaluate serial computed tomography (CT) findings of pulmonary mucormycosis correlated with peripheral blood absolute neutrophil count (ANC). Between February 1997 and June 2016, 20 immunocompromised patients (10 males, 10 females; mean age, 48.9 years) were histopathologically diagnosed as pulmonary mucormycosis. On initial (n=20) and follow-up (n=15) CT scans, the patterns of lung abnormalities and their changing features on follow-up scans were evaluated, and the pattern changes were correlated with ANC changes. All patients were immunocompromised. On initial CT scans, nodule (≤3cm)/mass (>3cm) or consolidation with surrounding ground-glass opacity halo (18/20, 90%) was the most common pattern. On follow-up CT, morphologic changes (13/15, 87%) could be seen and they included reversed halo (RH) sign, central necrosis, and air-crescent sign. Although all cases did not demonstrate the regular morphologic changes at the same timeline, various combinations of pattern change could be seen in all patients. Sequential morphologic changes were related with recovering of ANC in 13 of 15 patients. Pulmonary mucormycosis most frequently presents as consolidation or nodule/mass with halo sign at CT. Morphologic changes into RH sign, central necrotic cavity or air-crescent sign occur with treatment and recovery of ANC. (orig.)

Pulmonary mucormycosis. Serial morphologic changes on computed tomography correlate with clinical and pathologic findings

Energy Technology Data Exchange (ETDEWEB)

Nam, Bo Da; Kim, Tae Jung; Lee, Kyung Soo; Kim, Tae Sung; Chung, Myung Jin [Samsung Medical Centre, Sungkyunkwan University School of Medicine, Department of Radiology and Centre for Imaging Science, Seoul (Korea, Republic of); Han, Joungho [Samsung Medical Centre, Sungkyunkwan University School of Medicine, Department of Pathology, Seoul (Korea, Republic of)

2018-02-15

To evaluate serial computed tomography (CT) findings of pulmonary mucormycosis correlated with peripheral blood absolute neutrophil count (ANC). Between February 1997 and June 2016, 20 immunocompromised patients (10 males, 10 females; mean age, 48.9 years) were histopathologically diagnosed as pulmonary mucormycosis. On initial (n=20) and follow-up (n=15) CT scans, the patterns of lung abnormalities and their changing features on follow-up scans were evaluated, and the pattern changes were correlated with ANC changes. All patients were immunocompromised. On initial CT scans, nodule (≤3cm)/mass (>3cm) or consolidation with surrounding ground-glass opacity halo (18/20, 90%) was the most common pattern. On follow-up CT, morphologic changes (13/15, 87%) could be seen and they included reversed halo (RH) sign, central necrosis, and air-crescent sign. Although all cases did not demonstrate the regular morphologic changes at the same timeline, various combinations of pattern change could be seen in all patients. Sequential morphologic changes were related with recovering of ANC in 13 of 15 patients. Pulmonary mucormycosis most frequently presents as consolidation or nodule/mass with halo sign at CT. Morphologic changes into RH sign, central necrotic cavity or air-crescent sign occur with treatment and recovery of ANC. (orig.)

Interactive Rapid Dose Assessment Model (IRDAM): user's guide

International Nuclear Information System (INIS)

Poeton, R.W.; Moeller, M.P.; Laughlin, G.J.; Desrosiers, A.E.

1983-05-01

As part of the continuing emphasis on emergency preparedness the US Nuclear Regulatory Commission (NRC) sponsored the development of a rapid dose assessment system by Pacific Northwest Laboratory (PNL). This system, the Interactive Rapid Dose Assessment Model (IRDAM) is a micro-computer based program for rapidly assessing the radiological impact of accidents at nuclear power plants. This User's Guide provides instruction in the setup and operation of the equipment necessary to run IRDAM. Instructions are also given on how to load the magnetic disks and access the interactive part of the program. Two other companion volumes to this one provide additional information on IRDAM. Reactor Accident Assessment Methods (NUREG/CR-3012, Volume 2) describes the technical bases for IRDAM including methods, models and assumptions used in calculations. Scenarios for Comparing Dose Assessment Models (NUREG/CR-3012, Volume 3) provides the results of calculations made by IRDAM and other models for specific accident scenarios

Modern computer hardware and the role of central computing facilities in particle physics

International Nuclear Information System (INIS)

Zacharov, V.

1981-01-01

Important recent changes in the hardware technology of computer system components are reviewed, and the impact of these changes assessed on the present and future pattern of computing in particle physics. The place of central computing facilities is particularly examined, to answer the important question as to what, if anything, should be their future role. Parallelism in computing system components is considered to be an important property that can be exploited with advantage. The paper includes a short discussion of the position of communications and network technology in modern computer systems. (orig.)

Field microcomputerized multichannel γ ray spectrometer based on notebook computer

International Nuclear Information System (INIS)

Jia Wenyi; Wei Biao; Zhou Rongsheng; Li Guodong; Tang Hong

1996-01-01

Currently, field γ ray spectrometry can not rapidly measure γ ray full spectrum, so a field microcomputerized multichannel γ ray spectrometer based on notebook computer is described, and the γ ray full spectrum can be rapidly measured in the field

Autotransplantation of immature third molars using a computer-aided rapid prototyping model: a report of 4 cases.

Science.gov (United States)

Jang, Ji-Hyun; Lee, Seung-Jong; Kim, Euiseong

2013-11-01

Autotransplantation of immature teeth can be an option for premature tooth loss in young patients as an alternative to immediately replacing teeth with fixed or implant-supported prostheses. The present case series reports 4 successful autotransplantation cases using computer-aided rapid prototyping (CARP) models with immature third molars. The compromised upper and lower molars (n = 4) of patients aged 15-21 years old were transplanted with third molars using CARP models. Postoperatively, the pulp vitality and the development of the roots were examined clinically and radiographically. The patient follow-up period was 2-7.5 years after surgery. The long-term follow-up showed that all of the transplants were asymptomatic and functional. Radiographic examination indicated that the apices developed continuously and the root length and thickness increased. The final follow-up examination revealed that all of the transplants kept the vitality, and the apices were fully developed with normal periodontal ligaments and trabecular bony patterns. Based on long-term follow-up observations, our 4 cases of autotransplantation of immature teeth using CARP models resulted in favorable prognoses. The CARP model assisted in minimizing the extraoral time and the possible Hertwig epithelial root sheath injury of the transplanted tooth. Copyright © 2013 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

The Co-evolution of Climate Models and the Intergovernmental Panel on Climate Change

Science.gov (United States)

Somerville, R. C.

2010-12-01

As recently as the 1950s, global climate models, or GCMs, did not exist, and the notion that man-made carbon dioxide might lead to significant climate change was not regarded as a serious possibility by most experts. Today, of course, the prospect or threat of exactly this type of climate change dominates the science and ranks among the most pressing issues confronting all mankind. Indeed, the prevailing scientific view throughout the first half of the twentieth century was that adding carbon dioxide to the atmosphere would have only a negligible effect on climate. The science of climate change caused by atmospheric carbon dioxide changes has thus undergone a genuine revolution. An extraordinarily rapid development of global climate models has also characterized this period, especially in the three decades since about 1980. In these three decades, the number of GCMs has greatly increased, and their physical and computational aspects have both markedly improved. Modeling progress has been enabled by many scientific advances, of course, but especially by a massive increase in available computer power, with supercomputer speeds increasing by roughly a factor of a million in the three decades from about 1980 to 2010. This technological advance has permitted a rapid increase in the physical comprehensiveness of GCMs as well as in spatial computational resolution. In short, GCMs have dramatically evolved over time, in exactly the same recent period as popular interest and scientific concern about anthropogenic climate change have markedly increased. In parallel, a unique international organization, the Intergovernmental Panel on Climate Change, or IPCC, has also recently come into being and also evolved rapidly. Today, the IPCC has become widely respected and globally influential. The IPCC was founded in 1988, and its history is thus even shorter than that of GCMs. Yet, its stature today is such that a series of IPCC reports assessing climate change science has already

Rapidly changing treatment options adding burden to the management of typhoid fever

Directory of Open Access Journals (Sweden)

Jaspal Kaur

2015-01-01

Full Text Available Typhoid fever continues to be a global public health problem. It is caused by the facultative intracellular organisms Salmonella enteric serotype Typhi and Salmonella paratyphi. Antimicrobial therapy is the mainstay for treatment of typhoid fever. Chloramphenicol, ampicillin, and cotrimoxazole had been in use for decades for treating enteric fever. But the emergence and rapid spread of drug resistance has resulted in rapid shift of treatment options from chloramphenicol to fluoroquinolones to third generation cephalosporins to azithromycin with tigecycline and carbapenems in line, thus adding burden to the health-care sector in developing countries. Rational and judicious antibiotic prescribing practices by health professionals are necessary to prevent further development of drug resistance and help in re-emergence of sensitive strains.

Social psychiatry in a rapidly changing world

Directory of Open Access Journals (Sweden)

Thomas K. J. Craig

2016-01-01

Full Text Available Many societies around the world are experiencing a period of unprecedented change in traditional social roles and customs. Globalisation has contributed to materialism and a me-first individualism that heightens awareness of income inequality that itself is one of the most robust markers of unhappiness in society. Ever increasing urbanisation has driven an erosion of large ‘joint’ family arrangements to be replaced by smaller and relatively isolated nuclear families and single parent living. Mass migration has unmasked deep seated fear and prejudice towards the outsider in society. These global changes are fertile ground for the social conditions that have long been known to be risks for mental illness – poverty, poor quality child care, social isolation and the active discrimination and exclusion of the alien, the physically disabled and mentally ill. While there is little we can do to reverse global change, there is much a social psychiatrist can do to mitigate the effect, ensuring his/her voice is added to other calls for reducing discriminatory practice, promoting evidence-based social interventions such as parenting advice and peer support and ensuring that the success of a treatment is measured not just in terms of symptomatic improvement but in whether it results in an outcome that is valued by the patient.

Three dimensional evaluation of alveolar bone changes in response to different rapid palatal expansion activation rates

Directory of Open Access Journals (Sweden)

Brian LaBlonde

Full Text Available ABSTRACT Introduction: The aim of this multi-center retrospective study was to quantify the changes in alveolar bone height and thickness after using two different rapid palatal expansion (RPE activation protocols, and to determine whether a more rapid rate of expansion is likely to cause more adverse effects, such as alveolar tipping, dental tipping, fenestration and dehiscence of anchorage teeth. Methods: The sample consisted of pre- and post-expansion records from 40 subjects (age 8-15 years who underwent RPE using a 4-banded Hyrax appliance as part of their orthodontic treatment to correct posterior buccal crossbites. Subjects were divided into two groups according to their RPE activation rates (0.5 mm/day and 0.8 mm/day; n = 20 each group. Three-dimensional images for all included subjects were evaluated using Dolphin Imaging Software 11.7 Premium. Maxillary base width, buccal and palatal cortical bone thickness, alveolar bone height, and root angulation and length were measured. Significance of the changes in the measurements was evaluated using Wilcoxon signed-rank test and comparisons between groups were done using ANOVA. Significance was defined at p ≤ 0.05. Results: RPE activation rates of 0.5 mm per day (Group 1 and 0.8 mm per day (Group 2 caused significant increase in arch width following treatment; however, Group 2 showed greater increases compared to Group 1 (p < 0.01. Buccal alveolar height and width decreased significantly in both groups. Both treatment protocols resulted in significant increases in buccal-lingual angulation of teeth; however, Group 2 showed greater increases compared to Group 1 (p < 0.01. Conclusion: Both activation rates are associated with significant increase in intra-arch widths. However, 0.8 mm/day resulted in greater increases. The 0.8 mm/day activation rate also resulted in more increased dental tipping and decreased buccal alveolar bone thickness over 0.5 mm/day.

Shedding new light on rapidly resolving traumatic acute subdural hematomas.

Science.gov (United States)

Brooke, Magdalene; Patel, Atul; Castro-Moure, Federico; Victorino, Gregory P

2017-11-01

Rapidly resolving acute subdural hematomas (RRASDHs) have been described in case reports and case series but are still poorly understood. We hypothesized that a cohort analysis would confirm previously reported predictors of RRASDH including coagulopathy, additional intracranial hemorrhage, and low-density band on imaging. We also hypothesized that rapid resolution would be associated with improved trauma outcomes. We reviewed all nonoperative acute subdural hematomas (ASDHs) treated at our center from 2011 to 2015. Inclusion criteria were ASDH on computed tomography (CT), admission Glasgow coma score >7, and repeat CT to evaluate ASDH change. RRASDH was defined as reduced hematoma thickness by 50% within 72 h. Clinical data, CT findings, and trauma end points were analyzed for the RRASDH and nonresolving groups. There were 154 ASDH patients included, with 29 cases of RRASDH. The RRASDH group had a lower rate of comorbidities than the nonresolving group (58.6% versus 78.4%, P = 0.03) and a lower rate of prehospital anticoagulation (7.7% versus 37.1%, P = 0.004). Previously reported predictors of RRASDH did not differ between the groups, nor did any clinical outcome measures. When compared with patients who experienced rapid growth (>50% increased width in 72 h), the RRASDH group had lower mortality (3.4% versus 23.5%, P = 0.04). To our knowledge, this is the largest review of RRASDHs. We identified two previously unrecognized factors that may predict resolution; however, previously reported predictors were not associated with resolution. We also found no relationship between RRASDHs and improved standard trauma outcomes, calling into question the clinical significance of RRASDH. Copyright © 2017 Elsevier Inc. All rights reserved.

Green and sustainable computing pt.I

CERN Document Server

Hurson, Ali

2012-01-01

Since its first volume in 1960, Advances in Computers has presented detailed coverage of innovations in computer hardware, software, theory, design, and applications. It has also provided contributors with a medium in which they can explore their subjects in greater depth and breadth than journal articles usually allow. As a result, many articles have become standard references that continue to be of sugnificant, lasting value in this rapidly expanding field. In-depth surveys and tutorials on new computer technologyWell-known authors and researchers in the fieldExtensive bibliographies with m

Analysis of Changes in Market Shares of Commercial Banks Operating in Turkey Using Computational Intelligence Algorithms

OpenAIRE

Amasyali, M. Fatih; Demırhan, Ayse; Bal, Mert

2014-01-01

This paper aims to model the change in market share of 30 domestic and foreign banks, which have been operating between the years 1990 and 2009 in Turkey by taking into consideration 20 financial ratios of those banks. Due to the fragile structure of the banking sector in Turkey, this study plays an important role for determining the changes in market share of banks and taking the necessary measures promptly. For this reason, computational intelligence methods have been used in the study. Acc...

Changes in occlusal relationships in mixed dentition patients treated with rapid maxillary expansion. A prospective clinical study.

Science.gov (United States)

McNamara, James A; Sigler, Lauren M; Franchi, Lorenzo; Guest, Susan S; Baccetti, Tiziano

2010-03-01

To prospectively measure occlusal changes in mixed dentition patients who underwent a standardized early expansion protocol. The treatment sample consisted of 500 patients who were assigned to three groups according to molar relationship: Class I (n = 204), end-to-end (n = 166), and Class II (n = 130). All patients were treated with a bonded rapid maxillary expander (RME) followed by a removable maintenance plate and a transpalatal arch. Mean age at the start of treatment was 8.8 years (T(1)), with a pre-phase 2 treatment cephalogram (T(2)) taken 3.7 years later. The control sample consisted of the cephalometric records of 188 untreated subjects (Class 1, n = 79; end-to-end, n = 51; Class II, n = 58). The largest change in molar relationship was noted when the Class II treatment group (1.8 mm) was compared with the matched control group (0.3 mm). A positive change was seen in 81% of the Class II treatment group, with almost half of the group improving by > or = 2.0 mm. The end-to-end treatment group had a positive change of 1.4 mm, compared with a control value of 0.6 mm, and the Class I group of about 1 mm compared with controls, who remained unchanged (0.1 mm). Skeletal changes were not significant when any of the groups were compared with controls. The expansion protocol had a significantly favorable effect on the sagittal occlusal relationships of Class II, end-to-end, and Class I patients treated in the early mixed dentition.

Documenting and predicting topic changes in Computers in Biology and Medicine: A bibliometric keyword analysis from 1990 to 2017

Directory of Open Access Journals (Sweden)

Oliver Faust

Full Text Available The Computers in Biology and Medicine (CBM journal promotes the use of computing machinery in the fields of bioscience and medicine. Since the first volume in 1970, the importance of computers in these fields has grown dramatically, this is evident in the diversification of topics and an increase in the publication rate. In this study, we quantify both change and diversification of topics covered in. This is done by analysing the author supplied keywords, since they were electronically captured in 1990. The analysis starts by selecting 40 keywords, related to Medical (M (7, Data (D (10, Feature (F (17 and (AI (6 methods. Automated keyword clustering shows the statistical connection between the selected keywords. We found that the three most popular topics in CBM are: Support Vector Machine (SVM, Electroencephalography (EEG and IMAGE PROCESSING. In a separate analysis step, we bagged the selected keywords into sequential one year time slices and calculated the normalized appearance. The results were visualised with graphs that indicate the CBM topic changes. These graphs show that there was a transition from Artificial Neural Network (ANN to SVM. In 2006 SVM replaced ANN as the most important AI algorithm. Our investigation helps the editorial board to manage and embrace topic change. Furthermore, our analysis is interesting for the general reader, as the results can help them to adjust their research directions. Keywords: Research trends, Topic analysis, Topic detection and tracking, Text mining, Computers in biology and medicine

Wellsite computers--their increasing role in drilling operations

International Nuclear Information System (INIS)

Keenan, P.G.; Dyson, P.M.

1981-01-01

The increasing expense and complexity of exploration drilling, coupled with rapid advances in computer and microprocessor technology, have led to the development of computer-assisted wellsite logging units from their humble beginnings as simple hot wire gas detectors. The main applications of this technology can be recognized in the following areas: (a) Safety of wellsite personnel, rig and downhole equipment. (b) Increased drilling efficiency with the resultant time and cost savings. (c) Simulation of possible events allowing comparisons between actual and expected data to assist decision making at the wellsite. (d) Storage of data on tape/disk to allow rapid retrieval of data for postwell analysis and report production. 6 refs

Impacts of Watching Television and Computer Using on Student' Reading Habits

Directory of Open Access Journals (Sweden)

Ayşe Gül Aksaçlıoğlu

2013-11-01

Full Text Available Reading habits contribute both to the cognitive and social developments of indi- viduals in so many aspects. This function of the reading habit continues in the rapid social changing process of today’s world. However, children’s habits of te- levision watching and computer using have been recently seen to affect their reading habits. Therefore, defining the positive or negative impacts of television and computers on children and finding solutions carries significant importance. The aim of this study is to determine the influences of the television watching and computer using on children’s reading habits. In order to find out the influ- ences, a survey was performed on all 5th grade students at Bilkent Private Primary School and Çankaya Public Primary School located within Ankara Büyükþehir Municipality borders. The questionaire was applied to 222 students in these two schools. As a result of the study, it is clear that students prefer to play on com- puters and watch television in their leisure time to reading books. There is an inverse proportion apparent between the time spent using computers and watching television and the time spent on reading.

The future of PanDA in ATLAS distributed computing

Science.gov (United States)

De, K.; Klimentov, A.; Maeno, T.; Nilsson, P.; Oleynik, D.; Panitkin, S.; Petrosyan, A.; Schovancova, J.; Vaniachine, A.; Wenaus, T.

2015-12-01

Experiments at the Large Hadron Collider (LHC) face unprecedented computing challenges. Heterogeneous resources are distributed worldwide at hundreds of sites, thousands of physicists analyse the data remotely, the volume of processed data is beyond the exabyte scale, while data processing requires more than a few billion hours of computing usage per year. The PanDA (Production and Distributed Analysis) system was developed to meet the scale and complexity of LHC distributed computing for the ATLAS experiment. In the process, the old batch job paradigm of locally managed computing in HEP was discarded in favour of a far more automated, flexible and scalable model. The success of PanDA in ATLAS is leading to widespread adoption and testing by other experiments. PanDA is the first exascale workload management system in HEP, already operating at more than a million computing jobs per day, and processing over an exabyte of data in 2013. There are many new challenges that PanDA will face in the near future, in addition to new challenges of scale, heterogeneity and increasing user base. PanDA will need to handle rapidly changing computing infrastructure, will require factorization of code for easier deployment, will need to incorporate additional information sources including network metrics in decision making, be able to control network circuits, handle dynamically sized workload processing, provide improved visualization, and face many other challenges. In this talk we will focus on the new features, planned or recently implemented, that are relevant to the next decade of distributed computing workload management using PanDA.

Elucidating reaction mechanisms on quantum computers

Science.gov (United States)

Reiher, Markus; Wiebe, Nathan; Svore, Krysta M.; Wecker, Dave; Troyer, Matthias

2017-01-01

With rapid recent advances in quantum technology, we are close to the threshold of quantum devices whose computational powers can exceed those of classical supercomputers. Here, we show that a quantum computer can be used to elucidate reaction mechanisms in complex chemical systems, using the open problem of biological nitrogen fixation in nitrogenase as an example. We discuss how quantum computers can augment classical computer simulations used to probe these reaction mechanisms, to significantly increase their accuracy and enable hitherto intractable simulations. Our resource estimates show that, even when taking into account the substantial overhead of quantum error correction, and the need to compile into discrete gate sets, the necessary computations can be performed in reasonable time on small quantum computers. Our results demonstrate that quantum computers will be able to tackle important problems in chemistry without requiring exorbitant resources. PMID:28674011

Elucidating reaction mechanisms on quantum computers

Science.gov (United States)

Reiher, Markus; Wiebe, Nathan; Svore, Krysta M.; Wecker, Dave; Troyer, Matthias

2017-07-01

With rapid recent advances in quantum technology, we are close to the threshold of quantum devices whose computational powers can exceed those of classical supercomputers. Here, we show that a quantum computer can be used to elucidate reaction mechanisms in complex chemical systems, using the open problem of biological nitrogen fixation in nitrogenase as an example. We discuss how quantum computers can augment classical computer simulations used to probe these reaction mechanisms, to significantly increase their accuracy and enable hitherto intractable simulations. Our resource estimates show that, even when taking into account the substantial overhead of quantum error correction, and the need to compile into discrete gate sets, the necessary computations can be performed in reasonable time on small quantum computers. Our results demonstrate that quantum computers will be able to tackle important problems in chemistry without requiring exorbitant resources.

Elucidating reaction mechanisms on quantum computers.

Science.gov (United States)

Reiher, Markus; Wiebe, Nathan; Svore, Krysta M; Wecker, Dave; Troyer, Matthias

2017-07-18

With rapid recent advances in quantum technology, we are close to the threshold of quantum devices whose computational powers can exceed those of classical supercomputers. Here, we show that a quantum computer can be used to elucidate reaction mechanisms in complex chemical systems, using the open problem of biological nitrogen fixation in nitrogenase as an example. We discuss how quantum computers can augment classical computer simulations used to probe these reaction mechanisms, to significantly increase their accuracy and enable hitherto intractable simulations. Our resource estimates show that, even when taking into account the substantial overhead of quantum error correction, and the need to compile into discrete gate sets, the necessary computations can be performed in reasonable time on small quantum computers. Our results demonstrate that quantum computers will be able to tackle important problems in chemistry without requiring exorbitant resources.

A large-scale evaluation of computational protein function prediction

NARCIS (Netherlands)

Radivojac, P.; Clark, W.T.; Oron, T.R.; Schnoes, A.M.; Wittkop, T.; Kourmpetis, Y.A.I.; Dijk, van A.D.J.; Friedberg, I.

2013-01-01

Automated annotation of protein function is challenging. As the number of sequenced genomes rapidly grows, the overwhelming majority of protein products can only be annotated computationally. If computational predictions are to be relied upon, it is crucial that the accuracy of these methods be

Resolution of First- and Second-Order Linear Differential Equations with Periodic Inputs by a Computer Algebra System

Directory of Open Access Journals (Sweden)

M. Legua

2008-01-01

Full Text Available In signal processing, a pulse means a rapid change in the amplitude of a signal from a baseline value to a higher or lower value, followed by a rapid return to the baseline value. A square wave function may be viewed as a pulse that repeats its occurrence periodically but the return to the baseline value takes some time to happen. When these periodic functions act as inputs in dynamic systems, the standard tool commonly used to solve the associated initial value problem (IVP is Laplace transform and its inverse. We show how a computer algebra system may also provide the solution of these IVP straight forwardly by adequately introducing the periodic input.

Emerging Trends in Technology Education Computer Applications.

Science.gov (United States)

Hazari, Sunil I.

1993-01-01

Graphical User Interface (GUI)--and its variant, pen computing--is rapidly replacing older types of operating environments. Despite its heavier demand for processing power, GUI has many advantages. (SK)

Framework of Resource Management for Intercloud Computing

Directory of Open Access Journals (Sweden)

Mohammad Aazam

2014-01-01

Full Text Available There has been a very rapid increase in digital media content, due to which media cloud is gaining importance. Cloud computing paradigm provides management of resources and helps create extended portfolio of services. Through cloud computing, not only are services managed more efficiently, but also service discovery is made possible. To handle rapid increase in the content, media cloud plays a very vital role. But it is not possible for standalone clouds to handle everything with the increasing user demands. For scalability and better service provisioning, at times, clouds have to communicate with other clouds and share their resources. This scenario is called Intercloud computing or cloud federation. The study on Intercloud computing is still in its start. Resource management is one of the key concerns to be addressed in Intercloud computing. Already done studies discuss this issue only in a trivial and simplistic way. In this study, we present a resource management model, keeping in view different types of services, different customer types, customer characteristic, pricing, and refunding. The presented framework was implemented using Java and NetBeans 8.0 and evaluated using CloudSim 3.0.3 toolkit. Presented results and their discussion validate our model and its efficiency.

Grid computing

CERN Multimedia

2007-01-01

"Some of today's large-scale scientific activities - modelling climate change, Earth observation, studying the human genome and particle physics experiments - involve handling millions of bytes of data very rapidly." (1 page)

DOE Advanced Scientific Computing Advisory Committee (ASCAC) Subcommittee Report on Scientific and Technical Information

Energy Technology Data Exchange (ETDEWEB)

Hey, Tony [eScience Institute, University of Washington; Agarwal, Deborah [Lawrence Berkeley National Laboratory; Borgman, Christine [University of California, Los Angeles; Cartaro, Concetta [SLAC National Accelerator Laboratory; Crivelli, Silvia [Lawrence Berkeley National Laboratory; Van Dam, Kerstin Kleese [Pacific Northwest National Laboratory; Luce, Richard [University of Oklahoma; Arjun, Shankar [CADES, Oak Ridge National Laboratory; Trefethen, Anne [University of Oxford; Wade, Alex [Microsoft Research, Microsoft Corporation; Williams, Dean [Lawrence Livermore National Laboratory

2015-09-04

The Advanced Scientific Computing Advisory Committee (ASCAC) was charged to form a standing subcommittee to review the Department of Energy’s Office of Scientific and Technical Information (OSTI) and to begin by assessing the quality and effectiveness of OSTI’s recent and current products and services and to comment on its mission and future directions in the rapidly changing environment for scientific publication and data. The Committee met with OSTI staff and reviewed available products, services and other materials. This report summaries their initial findings and recommendations.

Rapid prototyping and stereolithography in dentistry

Science.gov (United States)

Nayar, Sanjna; Bhuminathan, S.; Bhat, Wasim Manzoor

2015-01-01

The word rapid prototyping (RP) was first used in mechanical engineering field in the early 1980s to describe the act of producing a prototype, a unique product, the first product, or a reference model. In the past, prototypes were handmade by sculpting or casting, and their fabrication demanded a long time. Any and every prototype should undergo evaluation, correction of defects, and approval before the beginning of its mass or large scale production. Prototypes may also be used for specific or restricted purposes, in which case they are usually called a preseries model. With the development of information technology, three-dimensional models can be devised and built based on virtual prototypes. Computers can now be used to create accurately detailed projects that can be assessed from different perspectives in a process known as computer aided design (CAD). To materialize virtual objects using CAD, a computer aided manufacture (CAM) process has been developed. To transform a virtual file into a real object, CAM operates using a machine connected to a computer, similar to a printer or peripheral device. In 1987, Brix and Lambrecht used, for the first time, a prototype in health care. It was a three-dimensional model manufactured using a computer numerical control device, a type of machine that was the predecessor of RP. In 1991, human anatomy models produced with a technology called stereolithography were first used in a maxillofacial surgery clinic in Viena. PMID:26015715

Rapid prototyping and stereolithography in dentistry.

Science.gov (United States)

Nayar, Sanjna; Bhuminathan, S; Bhat, Wasim Manzoor

2015-04-01

The word rapid prototyping (RP) was first used in mechanical engineering field in the early 1980s to describe the act of producing a prototype, a unique product, the first product, or a reference model. In the past, prototypes were handmade by sculpting or casting, and their fabrication demanded a long time. Any and every prototype should undergo evaluation, correction of defects, and approval before the beginning of its mass or large scale production. Prototypes may also be used for specific or restricted purposes, in which case they are usually called a preseries model. With the development of information technology, three-dimensional models can be devised and built based on virtual prototypes. Computers can now be used to create accurately detailed projects that can be assessed from different perspectives in a process known as computer aided design (CAD). To materialize virtual objects using CAD, a computer aided manufacture (CAM) process has been developed. To transform a virtual file into a real object, CAM operates using a machine connected to a computer, similar to a printer or peripheral device. In 1987, Brix and Lambrecht used, for the first time, a prototype in health care. It was a three-dimensional model manufactured using a computer numerical control device, a type of machine that was the predecessor of RP. In 1991, human anatomy models produced with a technology called stereolithography were first used in a maxillofacial surgery clinic in Viena.

Rapid changes in genetic architecture of behavioural syndromes following colonization of a novel environment.

Science.gov (United States)

Karlsson Green, K; Eroukhmanoff, F; Harris, S; Pettersson, L B; Svensson, E I

2016-01-01

Behavioural syndromes, that is correlated behaviours, may be a result from adaptive correlational selection, but in a new environmental setting, the trait correlation might act as an evolutionary constraint. However, knowledge about the quantitative genetic basis of behavioural syndromes, and the stability and evolvability of genetic correlations under different ecological conditions, is limited. We investigated the quantitative genetic basis of correlated behaviours in the freshwater isopod Asellus aquaticus. In some Swedish lakes, A. aquaticus has recently colonized a novel habitat and diverged into two ecotypes, presumably due to habitat-specific selection from predation. Using a common garden approach and animal model analyses, we estimated quantitative genetic parameters for behavioural traits and compared the genetic architecture between the ecotypes. We report that the genetic covariance structure of the behavioural traits has been altered in the novel ecotype, demonstrating divergence in behavioural correlations. Thus, our study confirms that genetic correlations behind behaviours can change rapidly in response to novel selective environments. © 2015 European Society For Evolutionary Biology. Journal of Evolutionary Biology © 2015 European Society For Evolutionary Biology.

Fibre recruitment and shape changes of knee ligaments during motion: as revealed by a computer graphics-based model.

Science.gov (United States)

Lu, T W; O'Connor, J J

1996-01-01

A computer graphics-based model of the knee ligaments in the sagittal plane was developed for the simulation and visualization of the shape changes and fibre recruitment process of the ligaments during motion under unloaded and loaded conditions. The cruciate and collateral ligaments were modelled as ordered arrays of fibres which link attachment areas on the tibia and femur. Fibres slacken and tighten as the ligament attachment areas on the bones rotate and translate relative to each other. A four-bar linkage, composed of the femur, tibia and selected isometric fibres of the two cruciates, was used to determine the motion of the femur relative to the tibia during passive (unloaded) movement. Fibres were assumed to slacken in a Euler buckling mode when the distances between their attachments are less than chosen reference lengths. The ligament shape changes and buckling patterns are demonstrated with computer graphics. When the tibia is translated anteriorly or posteriorly relative to the femur by muscle forces and external loads, some ligament fibres tighten and are recruited progressively to transmit increasing shear forces. The shape changes and fibre recruitment patterns predicted by the model compare well qualitatively with experimental results reported in the literature. The computer graphics approach provides insight into the micro behaviour of the knee ligaments. It may help to explain ligament injury mechanisms and provide useful information to guide the design of ligament replacements.

Rapid thermal transient in a reactor coolant channel

International Nuclear Information System (INIS)

Cherubini, A.

1986-01-01

This report deals with the problem of one-dimensional thermo-fluid-dynamics in a reactor coolant channel, with the aim of determining the evolution in time of the coolant (H*L2O), in one-and/or two-phase regimes, subjected to a great and rapid increase in heat flux (accident conditions). To this aim, the following are set out: a) the physical model used; b) the equations inherent in the above model; c) the numerical methods employed to solve them by means of a computer programme called CABO (CAnale BOllente). Next a typical problem of rapid thermal transient resolved by CABO is reported. The results obtained, expressed in form of graphs, are fully discussed. Finally comments on possible developments of CABO follow

Rapid Monte Carlo Simulation of Gravitational Wave Galaxies

Science.gov (United States)

Breivik, Katelyn; Larson, Shane L.

2015-01-01

With the detection of gravitational waves on the horizon, astrophysical catalogs produced by gravitational wave observatories can be used to characterize the populations of sources and validate different galactic population models. Efforts to simulate gravitational wave catalogs and source populations generally focus on population synthesis models that require extensive time and computational power to produce a single simulated galaxy. Monte Carlo simulations of gravitational wave source populations can also be used to generate observation catalogs from the gravitational wave source population. Monte Carlo simulations have the advantes of flexibility and speed, enabling rapid galactic realizations as a function of galactic binary parameters with less time and compuational resources required. We present a Monte Carlo method for rapid galactic simulations of gravitational wave binary populations.

Industrial applications of computed tomography

DEFF Research Database (Denmark)

De Chiffre, Leonardo; Carmignato, S.; Kruth, J. -P.

2014-01-01

The number of industrial applications of Computed Tomography(CT) is large and rapidly increasing. After a brief market overview, the paper gives a survey of state of the art and upcoming CT technologies, covering types of CT systems, scanning capabilities, and technological advances. The paper...

Influence of Boussinesq coefficient on depth-averaged modelling of rapid flows

Science.gov (United States)

Yang, Fan; Liang, Dongfang; Xiao, Yang

2018-04-01

The traditional Alternating Direction Implicit (ADI) scheme has been proven to be incapable of modelling trans-critical flows. Its inherent lack of shock-capturing capability often results in spurious oscillations and computational instabilities. However, the ADI scheme is still widely adopted in flood modelling software, and various special treatments have been designed to stabilise the computation. Modification of the Boussinesq coefficient to adjust the amount of fluid inertia is a numerical treatment that allows the ADI scheme to be applicable to rapid flows. This study comprehensively examines the impact of this numerical treatment over a range of flow conditions. A shock-capturing TVD-MacCormack model is used to provide reference results. For unsteady flows over a frictionless bed, such as idealised dam-break floods, the results suggest that an increase in the value of the Boussinesq coefficient reduces the amplitude of the spurious oscillations. The opposite is observed for steady rapid flows over a frictional bed. Finally, a two-dimensional urban flooding phenomenon is presented, involving unsteady flow over a frictional bed. The results show that increasing the value of the Boussinesq coefficient can significantly reduce the numerical oscillations and reduce the predicted area of inundation. In order to stabilise the ADI computations, the Boussinesq coefficient could be judiciously raised or lowered depending on whether the rapid flow is steady or unsteady and whether the bed is frictional or frictionless. An increase in the Boussinesq coefficient generally leads to overprediction of the propagating speed of the flood wave over a frictionless bed, but the opposite is true when bed friction is significant.

Computational Protein Design

DEFF Research Database (Denmark)

Johansson, Kristoffer Enøe

Proteins are the major functional group of molecules in biology. The impact of protein science on medicine and chemical productions is rapidly increasing. However, the greatest potential remains to be realized. The fi eld of protein design has advanced computational modeling from a tool of support...... to a central method that enables new developments. For example, novel enzymes with functions not found in natural proteins have been de novo designed to give enough activity for experimental optimization. This thesis presents the current state-of-the-art within computational design methods together...... with a novel method based on probability theory. With the aim of assembling a complete pipeline for protein design, this work touches upon several aspects of protein design. The presented work is the computational half of a design project where the other half is dedicated to the experimental part...

How we learn to make decisions: rapid propagation of reinforcement learning prediction errors in humans.

Science.gov (United States)

Krigolson, Olav E; Hassall, Cameron D; Handy, Todd C

2014-03-01

Our ability to make decisions is predicated upon our knowledge of the outcomes of the actions available to us. Reinforcement learning theory posits that actions followed by a reward or punishment acquire value through the computation of prediction errors-discrepancies between the predicted and the actual reward. A multitude of neuroimaging studies have demonstrated that rewards and punishments evoke neural responses that appear to reflect reinforcement learning prediction errors [e.g., Krigolson, O. E., Pierce, L. J., Holroyd, C. B., & Tanaka, J. W. Learning to become an expert: Reinforcement learning and the acquisition of perceptual expertise. Journal of Cognitive Neuroscience, 21, 1833-1840, 2009; Bayer, H. M., & Glimcher, P. W. Midbrain dopamine neurons encode a quantitative reward prediction error signal. Neuron, 47, 129-141, 2005; O'Doherty, J. P. Reward representations and reward-related learning in the human brain: Insights from neuroimaging. Current Opinion in Neurobiology, 14, 769-776, 2004; Holroyd, C. B., & Coles, M. G. H. The neural basis of human error processing: Reinforcement learning, dopamine, and the error-related negativity. Psychological Review, 109, 679-709, 2002]. Here, we used the brain ERP technique to demonstrate that not only do rewards elicit a neural response akin to a prediction error but also that this signal rapidly diminished and propagated to the time of choice presentation with learning. Specifically, in a simple, learnable gambling task, we show that novel rewards elicited a feedback error-related negativity that rapidly decreased in amplitude with learning. Furthermore, we demonstrate the existence of a reward positivity at choice presentation, a previously unreported ERP component that has a similar timing and topography as the feedback error-related negativity that increased in amplitude with learning. The pattern of results we observed mirrored the output of a computational model that we implemented to compute reward

Wyoming Basin Rapid Ecoregional Assessment

Science.gov (United States)

Carr, Natasha B.; Melcher, Cynthia P.

2015-08-28

The Wyoming Basin Rapid Ecoregional Assessment was conducted in partnership with the Bureau of Land Management (BLM). The overall goals of the BLM Rapid Ecoregional Assessments (REAs) are to identify important ecosystems and wildlife habitats at broad spatial scales; identify where these resources are at risk from Change Agents, including development, wildfire, invasive species, disease and climate change; quantify cumulative effects of anthropogenic stressors; and assess current levels of risk to ecological resources across a range of spatial scales and jurisdictional boundaries by assessing all lands within an ecoregion. There are several components of the REAs. Management Questions, developed by the BLM and stakeholders for the ecoregion, identify the regionally significant information needed for addressing land-management responsibilities. Conservation Elements represent regionally significant species and ecological communities that are of management concern. Change Agents that currently affect or are likely to affect the condition of species and communities in the future are identified and assessed. REAs also identify areas that have high conservation potential that are referred to as “large intact areas.” At the ecoregion level, the ecological value of large intact areas is based on the assumption that because these areas have not been greatly altered by human activities (such as development), they are more likely to contain a variety of plant and animal communities and to be resilient and resistant to changes resulting from natural disturbances such as fire, insect outbreaks, and disease.

High-Resolution Melt Analysis for Rapid Comparison of Bacterial Community Compositions

DEFF Research Database (Denmark)

Hjelmsø, Mathis Hjort; Hansen, Lars Hestbjerg; Bælum, Jacob

2014-01-01

In the study of bacterial community composition, 16S rRNA gene amplicon sequencing is today among the preferred methods of analysis. The cost of nucleotide sequence analysis, including requisite computational and bioinformatic steps, however, takes up a large part of many research budgets. High......-resolution melt (HRM) analysis is the study of the melt behavior of specific PCR products. Here we describe a novel high-throughput approach in which we used HRM analysis targeting the 16S rRNA gene to rapidly screen multiple complex samples for differences in bacterial community composition. We hypothesized...... that HRM analysis of amplified 16S rRNA genes from a soil ecosystem could be used as a screening tool to identify changes in bacterial community structure. This hypothesis was tested using a soil microcosm setup exposed to a total of six treatments representing different combinations of pesticide...

Priors engaged in long-latency responses to mechanical perturbations suggest a rapid update in state estimation.

Directory of Open Access Journals (Sweden)

Frédéric Crevecoeur

Full Text Available In every motor task, our brain must handle external forces acting on the body. For example, riding a bike on cobblestones or skating on irregular surface requires us to appropriately respond to external perturbations. In these situations, motor predictions cannot help anticipate the motion of the body induced by external factors, and direct use of delayed sensory feedback will tend to generate instability. Here, we show that to solve this problem the motor system uses a rapid sensory prediction to correct the estimated state of the limb. We used a postural task with mechanical perturbations to address whether sensory predictions were engaged in upper-limb corrective movements. Subjects altered their initial motor response in ∼60 ms, depending on the expected perturbation profile, suggesting the use of an internal model, or prior, in this corrective process. Further, we found trial-to-trial changes in corrective responses indicating a rapid update of these perturbation priors. We used a computational model based on Kalman filtering to show that the response modulation was compatible with a rapid correction of the estimated state engaged in the feedback response. Such a process may allow us to handle external disturbances encountered in virtually every physical activity, which is likely an important feature of skilled motor behaviour.

Rapid Assessment of Small Changes to Major Gun and Projectile Dynamic Parameters

National Research Council Canada - National Science Library

Erline, Thomas

1997-01-01

The U.S. Navy's 5-in 54-cal. (5"/54) gun system Mark (Mk) 45 was subjected to first-order dynamic analysis tools that allowed rapid assessment of ballistic dispersion of a typical naval high explosive projectile...

Processing Optimization of Typed Resources with Synchronized Storage and Computation Adaptation in Fog Computing

Directory of Open Access Journals (Sweden)

Zhengyang Song

2018-01-01

Full Text Available Wide application of the Internet of Things (IoT system has been increasingly demanding more hardware facilities for processing various resources including data, information, and knowledge. With the rapid growth of generated resource quantity, it is difficult to adapt to this situation by using traditional cloud computing models. Fog computing enables storage and computing services to perform at the edge of the network to extend cloud computing. However, there are some problems such as restricted computation, limited storage, and expensive network bandwidth in Fog computing applications. It is a challenge to balance the distribution of network resources. We propose a processing optimization mechanism of typed resources with synchronized storage and computation adaptation in Fog computing. In this mechanism, we process typed resources in a wireless-network-based three-tier architecture consisting of Data Graph, Information Graph, and Knowledge Graph. The proposed mechanism aims to minimize processing cost over network, computation, and storage while maximizing the performance of processing in a business value driven manner. Simulation results show that the proposed approach improves the ratio of performance over user investment. Meanwhile, conversions between resource types deliver support for dynamically allocating network resources.

Gender and computer games / video games : girls’ perspective orientation

OpenAIRE

Yan, Jingjing

2010-01-01

The topic of this thesis is “Gender Differences in Computer games/ Video games Industry”. Due to rapid development in technology and popularization of computers all around the world, computer games have already become a kind of common entertainment. Because computer games were designed especially for boys at the very beginning, there are still some remaining barriers when training female game designers and expanding game markets among female players.This thesis is mainly based on two studies ...

The Anatomy of Big Data Computing

OpenAIRE

Kune, Raghavendra; Konugurthi, Pramodkumar; Agarwal, Arun; Chillarige, Raghavendra Rao; Buyya, Rajkumar

2015-01-01

Advances in information technology and its widespread growth in several areas of business, engineering, medical and scientific studies are resulting in information/data explosion. Knowledge discovery and decision making from such rapidly growing voluminous data is a challenging task in terms of data organization and processing, which is an emerging trend known as Big Data Computing; a new paradigm which combines large scale compute, new data intensive techniques and mathematical models to bui...

Rapid breeding and varietal replacement are critical to adaptation of cropping systems in the developing world to climate change.

Science.gov (United States)

Atlin, Gary N; Cairns, Jill E; Das, Biswanath

2017-03-01

Plant breeding is a key mechanism for adaptation of cropping systems to climate change. Much discussion of breeding for climate change focuses on genes with large effects on heat and drought tolerance, but phenology and stress tolerance are highly polygenic. Adaptation will therefore mainly result from continually adjusting allele frequencies at many loci through rapid-cycle breeding that delivers a steady stream of incrementally improved cultivars. This will require access to elite germplasm from other regions, shortened breeding cycles, and multi-location testing systems that adequately sample the target population of environments. The objective of breeding and seed systems serving smallholder farmers should be to ensure that they use varieties developed in the last 10 years. Rapid varietal turnover must be supported by active dissemination of new varieties, and active withdrawal of obsolete ones. Commercial seed systems in temperate regions achieve this through competitive seed markets, but in the developing world, most crops are not served by competitive commercial seed systems, and many varieties date from the end of the Green Revolution (the late 1970s, when the second generation of modern rice and wheat varieties had been widely adopted). These obsolete varieties were developed in a climate different than today's, placing farmers at risk. To reduce this risk, a strengthened breeding system is needed, with freer international exchange of elite varieties, short breeding cycles, high selection intensity, wide-scale phenotyping, and accurate selection supported by genomic technology. Governments need to incentivize varietal release and dissemination systems to continuously replace obsolete varieties.

Energy-Aware Computation Offloading of IoT Sensors in Cloudlet-Based Mobile Edge Computing.

Science.gov (United States)

Ma, Xiao; Lin, Chuang; Zhang, Han; Liu, Jianwei

2018-06-15

Mobile edge computing is proposed as a promising computing paradigm to relieve the excessive burden of data centers and mobile networks, which is induced by the rapid growth of Internet of Things (IoT). This work introduces the cloud-assisted multi-cloudlet framework to provision scalable services in cloudlet-based mobile edge computing. Due to the constrained computation resources of cloudlets and limited communication resources of wireless access points (APs), IoT sensors with identical computation offloading decisions interact with each other. To optimize the processing delay and energy consumption of computation tasks, theoretic analysis of the computation offloading decision problem of IoT sensors is presented in this paper. In more detail, the computation offloading decision problem of IoT sensors is formulated as a computation offloading game and the condition of Nash equilibrium is derived by introducing the tool of a potential game. By exploiting the finite improvement property of the game, the Computation Offloading Decision (COD) algorithm is designed to provide decentralized computation offloading strategies for IoT sensors. Simulation results demonstrate that the COD algorithm can significantly reduce the system cost compared with the random-selection algorithm and the cloud-first algorithm. Furthermore, the COD algorithm can scale well with increasing IoT sensors.

VHBORE: A code to compute borehole fluid conductivity profiles with pressure changes in the borehole

International Nuclear Information System (INIS)

Hale, F.V.; Tsang, C.F.

1994-06-01

This report describes the code VHBORE which can be used to model fluid electric conductivity profiles in a borehole intersecting fractured rock under conditions of changing pressure in the well bore. Pressure changes may be due to water level variations caused by pumping or fluid density effects as formation fluid is drawn into the borehole. Previous reports describe the method of estimating the hydrologic behavior of fractured rock using a time series of electric conductivity logs and an earlier code, BORE, to generate electric conductivity logs under constant pressure and flow rate conditions. The earlier model, BORE, assumed a constant flow rate, q i , for each inflow into the well bore. In the present code the user supplies the location, constant pressure, h i , transmissivity, T i , and storativity, S i , for each fracture, as well as the initial water level in the well, h w (0), In addition, the input data contains changes in the water level at later times, Δh w (t), typically caused by turning a pump on or off. The variable density calculation also requires input of the density of each of the inflow fluids, ρ i , and the initial uniform density of the well bore fluid, ρ w (0). These parameters are used to compute the flow rate for each inflow point at each time step. The numerical method of Jacob and Lohman (1952) is used to compute the flow rate into or out of the fractures based on the changes in pressure in the wellbore. A dimensionless function relates flow rate as a function of time in response to an imposed pressure change. The principle of superposition is used to determine the net flow rate from a time series of pressure changes. Additional reading on the relationship between drawdown and flow rate can be found in Earlougher (1977), particularly his Section 4.6, open-quotes Constant-Pressure Flow Testingclose quotes

Ward nurses' knowledge of computed tomography scanning.

Science.gov (United States)

Majeed, M A; Nayeemuddin, M; Christie, M

Patients benefit from and are reassured by advance information on procedures that they are to undergo. Ward nurses should have adequate knowledge of radiological investigations to ensure proper patient preparation and good interdepartmental communication to avoid delays and cancellations. This study was conducted to assess the ward nurses' knowledge of the process of computed tomography (CT) scanning. One hundred and twenty qualified nurses were asked to complete a questionnaire regarding CT scanning. The findings revealed a suboptimal level of awareness about the process. This is probably due to lack of formal teaching for nurses on the wards in regards the different radiological procedures and patient preparation. There is a strong case for better educational talks on rapidly changing radiological techniques for ward staff to ensure high-quality patient care.

Does 1:1 Computing in a Junior High-School Change the Pedagogical Perspectives of Teachers and their Educational Discourse?

Directory of Open Access Journals (Sweden)

Yehuda Peled

2015-12-01

Full Text Available Transforming a school from traditional teaching and learning to a one-to-one (1:1 classroom, in which a teacher and students have personal digital devices, inevitably requires changes in the way the teacher addresses her role. This study examined the implications of integrating 1:1 computing on teachers’ pedagogical perceptions and the classroom’s educational discourse. A change in pedagogical perceptions during three years of teaching within this model was investigated. The research analyzed data from 14 teachers teaching in a junior high school in the north of Israel collected over the course of three years through interviews and lesson observations. The findings show that the 1:1 computing allows teachers to improve their teaching skills; however, it fails to change their fundamental attitudes in regard to teaching and learning processes. It was further found that the use of a laptop by each student does not significantly improve the classroom’s learning discourse. The computer is perceived as an individual or group learning technology rather than as a tool for conducting learning discourse. An analysis of the data collected shows a great contribution to collaboration among teachers in preparing technology-enhanced lessons. The findings are discussed in terms of Bruner’s (Olson & Bruner, 1996 “folk psychology” and “folk pedagogy” of teachers and “the new learning ecology” framework in 1:1 classroom (Lee, Spires, Wiebe, Hollebrands, & Young, 2015. One of the main recommendations of this research is to reflect on findings from the teaching staff and the school community emphasizing 1:1 technology as a tool for significant pedagogical change. It seems that the use of personal technology per se is not enough for pedagogical changes to take place; the change must begin with teachers’ perceptions and attitudes.

Adapting a Markov Monte Carlo simulation model for forecasting the number of Coronary Artery Revascularisation Procedures in an era of rapidly changing technology and policy

Directory of Open Access Journals (Sweden)

Knuiman Matthew

2008-06-01

Full Text Available Abstract Background Treatments for coronary heart disease (CHD have evolved rapidly over the last 15 years with considerable change in the number and effectiveness of both medical and surgical treatments. This period has seen the rapid development and uptake of statin drugs and coronary artery revascularization procedures (CARPs that include Coronary Artery Bypass Graft procedures (CABGs and Percutaneous Coronary Interventions (PCIs. It is difficult in an era of such rapid change to accurately forecast requirements for treatment services such as CARPs. In a previous paper we have described and outlined the use of a Markov Monte Carlo simulation model for analyzing and predicting the requirements for CARPs for the population of Western Australia (Mannan et al, 2007. In this paper, we expand on the use of this model for forecasting CARPs in Western Australia with a focus on the lack of adequate performance of the (standard model for forecasting CARPs in a period during the mid 1990s when there were considerable changes to CARP technology and implementation policy and an exploration and demonstration of how the standard model may be adapted to achieve better performance. Methods Selected key CARP event model probabilities are modified based on information relating to changes in the effectiveness of CARPs from clinical trial evidence and an awareness of trends in policy and practice of CARPs. These modified model probabilities and the ones obtained by standard methods are used as inputs in our Markov simulation model. Results The projected numbers of CARPs in the population of Western Australia over 1995–99 only improve marginally when modifications to model probabilities are made to incorporate an increase in effectiveness of PCI procedures. However, the projected numbers improve substantially when, in addition, further modifications are incorporated that relate to the increased probability of a PCI procedure and the reduced probability of a CABG

Adapting a Markov Monte Carlo simulation model for forecasting the number of coronary artery revascularisation procedures in an era of rapidly changing technology and policy.

Science.gov (United States)

Mannan, Haider R; Knuiman, Matthew; Hobbs, Michael

2008-06-25

Treatments for coronary heart disease (CHD) have evolved rapidly over the last 15 years with considerable change in the number and effectiveness of both medical and surgical treatments. This period has seen the rapid development and uptake of statin drugs and coronary artery revascularization procedures (CARPs) that include Coronary Artery Bypass Graft procedures (CABGs) and Percutaneous Coronary Interventions (PCIs). It is difficult in an era of such rapid change to accurately forecast requirements for treatment services such as CARPs. In a previous paper we have described and outlined the use of a Markov Monte Carlo simulation model for analyzing and predicting the requirements for CARPs for the population of Western Australia (Mannan et al, 2007). In this paper, we expand on the use of this model for forecasting CARPs in Western Australia with a focus on the lack of adequate performance of the (standard) model for forecasting CARPs in a period during the mid 1990s when there were considerable changes to CARP technology and implementation policy and an exploration and demonstration of how the standard model may be adapted to achieve better performance. Selected key CARP event model probabilities are modified based on information relating to changes in the effectiveness of CARPs from clinical trial evidence and an awareness of trends in policy and practice of CARPs. These modified model probabilities and the ones obtained by standard methods are used as inputs in our Markov simulation model. The projected numbers of CARPs in the population of Western Australia over 1995-99 only improve marginally when modifications to model probabilities are made to incorporate an increase in effectiveness of PCI procedures. However, the projected numbers improve substantially when, in addition, further modifications are incorporated that relate to the increased probability of a PCI procedure and the reduced probability of a CABG procedure stemming from changed CARP preference

Changes in computed tomography features following preoperative chemotherapy for nephroblastoma: relation to histopathological classification

International Nuclear Information System (INIS)

Olsen, Oeystein E.; Jeanes, Annmarie C.; Roebuck, Derek J.; Owens, Catherine M.; Sebire, Neil J.; Risdon, Rupert A.; Michalski, Anthony J.

2004-01-01

The objective of this study is to assess computed tomography (CT) changes, both volume estimates and subjective features, following preoperative chemotherapy for nephroblastoma (Wilms' tumour) in patients treated on the United Kingdom Children's Cancer Study Group Wilms' Tumour Study-3 (UKW-3) protocol and to compare CT changes and histopathological classification. Twenty-one nephroblastomas in 15 patients treated on UKW-3 were included. All patients were examined by CT before and after preoperative chemotherapy treatment. CT images were reviewed (estimated volume change and subjectively assessed features). CT changes were compared to histopathological classification. Of the 21 tumours, all five high-risk tumours decreased in volume following chemotherapy (median -79%; range -37 to -91%). The sole low-risk tumour decreased in volume by 98%. Ten intermediate-risk tumours decreased in volume (median -72%; range -6 to -98%) and five intermediate-risk tumours increased (median +110%; range +11 to +164%). None of the five high-risk tumours, compared to 15/16 intermediate or low-risk tumours, became less dense and/or more homogeneous, or virtually disappeared, following chemotherapy. Volume change following chemotherapy did not relate to histopathological risk group. Changes in subjectively assessed qualitative CT features were more strongly related to histopathological risk group. (orig.)

Age-related cerebral white matter changes on computed tomography

International Nuclear Information System (INIS)

Fukuda, Hitoshi; Kobayashi, Shotai; Koide, Hiromi; Yamaguchi, Shuhei; Okada, Kazunori; Shimote, Kouichi; Tsunematsu, Tokugoro

1989-01-01

Changes of cerebral white matter on computed cranial tomography related to aging were studied in 70 subjects aged 30 to 94 years. The subjects had no histories of cerebrovascular accidents and no abnormalities in the central nervous system were shown by physical examinations and CT scans. We measured the average attenuation values (CT numbers) of each elliptical region (165 pixels, 0.39cm 2 ) in the bilateral thalamus and twelve areas of deep white matter. Multiple regression analysis was used to assess the effects of age, cranial size and cranial bone CT numbers on the brain CT numbers. We also studied the association between brain CT numbers and brain atrophy, hypertension, diabetes mellitus. CT numbers of frontal white matter surrounding anterior horns decreased with aging in 70 subjects aged 30 to 94 years. No significant correlation between age and brain CT numbers was found in any other region by multivariate analysis, because of the prominent effect of cranial bone CT numbers on brain CT numbers. Although no age-related changes of white matter CT numbers was found in 41 subjects aged 30 to 65 years, there were significant negative correlations between age and white matter CT numbers at all regions in 29 subjects aged 66 to 94 years. Brain atrophy was associated with brain CT numbers. No association was found for hypertension or diabetes mellitus. Brain CT numbers decreased with aging even in neurologically healthy persons in older age. Brain CT numbers also decreased as cerebral atrophy advanced. (author)

Age-related cerebral white matter changes on computed tomography

Energy Technology Data Exchange (ETDEWEB)

Fukuda, Hitoshi; Kobayashi, Shotai; Koide, Hiromi; Yamaguchi, Shuhei; Okada, Kazunori; Shimote, Kouichi; Tsunematsu, Tokugoro

1989-01-01

Changes of cerebral white matter on computed cranial tomography related to aging were studied in 70 subjects aged 30 to 94 years. The subjects had no histories of cerebrovascular accidents and no abnormalities in the central nervous system were shown by physical examinations and CT scans. We measured the average attenuation values (CT numbers) of each elliptical region (165 pixels, 0.39cm/sup 2/) in the bilateral thalamus and twelve areas of deep white matter. Multiple regression analysis was used to assess the effects of age, cranial size and cranial bone CT numbers on the brain CT numbers. We also studied the association between brain CT numbers and brain atrophy, hypertension, diabetes mellitus. CT numbers of frontal white matter surrounding anterior horns decreased with aging in 70 subjects aged 30 to 94 years. No significant correlation between age and brain CT numbers was found in any other region by multivariate analysis, because of the prominent effect of cranial bone CT numbers on brain CT numbers. Although no age-related changes of white matter CT numbers was found in 41 subjects aged 30 to 65 years, there were significant negative correlations between age and white matter CT numbers at all regions in 29 subjects aged 66 to 94 years. Brain atrophy was associated with brain CT numbers. No association was found for hypertension or diabetes mellitus. Brain CT numbers decreased with aging even in neurologically healthy persons in older age. Brain CT numbers also decreased as cerebral atrophy advanced. (author).

Portable Diagnostics and Rapid Germination

Energy Technology Data Exchange (ETDEWEB)