WorldWideScience

Sample records for rapid methods fermentables

  1. A rapid method for an offline glycerol determination during microbial fermentation

    Directory of Open Access Journals (Sweden)

    Jennifer Kuhn

    2015-05-01

    Conclusions: With this rapid assay, glycerol could be detected easily in microbial fermentation broth. It is reliable over a wide concentration range including advantages such as an easy assay set-up, a short assay time and no sample pretreatment.

  2. A novel method to rapidly distinguish the geographical origin of traditional fermented-salted vegetables by mass fingerprinting

    Science.gov (United States)

    Yoon, So-Ra; Kim, Sung Hyun; Lee, Hae-Won

    2017-01-01

    The geographical origin of kimchi is of interest to consumers and producers because the prices of commercial kimchi products can vary significantly according to the geographical origin. Hence, social issues related to the geographical origin of kimchi in Korea have emerged as a major problem. In this study, the geographical origin of kimchi was determined by comparing the mass fingerprints obtained for Korean and Chinese kimchi samples by MALDI-TOF MS with multivariate analysis. The results obtained herein provide an accurate, powerful tool to clearly discriminate kimchi samples based on their geographical origin within a short time and to ensure food authenticity, which is of significance in the kimchi industry. Furthermore, our MALDI-TOF MS method could be applied to determining the geographical origin of other fermented-salted vegetables at a reduced cost in shorter times. PMID:29149220

  3. A novel method to rapidly distinguish the geographical origin of traditional fermented-salted vegetables by mass fingerprinting.

    Directory of Open Access Journals (Sweden)

    So-Ra Yoon

    Full Text Available The geographical origin of kimchi is of interest to consumers and producers because the prices of commercial kimchi products can vary significantly according to the geographical origin. Hence, social issues related to the geographical origin of kimchi in Korea have emerged as a major problem. In this study, the geographical origin of kimchi was determined by comparing the mass fingerprints obtained for Korean and Chinese kimchi samples by MALDI-TOF MS with multivariate analysis. The results obtained herein provide an accurate, powerful tool to clearly discriminate kimchi samples based on their geographical origin within a short time and to ensure food authenticity, which is of significance in the kimchi industry. Furthermore, our MALDI-TOF MS method could be applied to determining the geographical origin of other fermented-salted vegetables at a reduced cost in shorter times.

  4. Method for anaerobic fermentation and biogas production

    DEFF Research Database (Denmark)

    2013-01-01

    The present invention relates to a method for biomass processing, anaerobic fermentation of the processed biomass, and the production biogas. In particular, the invention relates to a system and method for generating biogas from anaerobic fermentation of processed organic material that comprises...

  5. Rapid determination of hyaluronic acid concentration in fermentation broth with near-infrared spectroscopy

    Directory of Open Access Journals (Sweden)

    Qin Dong

    2014-11-01

    Full Text Available Hyaluronic acid (HA concentration is an important parameter in fermentation process. Currently, carbazole assay is widely used for HA content determination in routine analysis. However, this method is time-consuming, environment polluting and has the risk of microbial contamination, as well as the results lag behind fermentation process. This paper attempted the feasibility to predict the concentration of HA in fermentation broth by using near infrared (NIR spectroscopy in transmission mode. In this work, a total of 56 samples of fermentation broth from 7 batches were analyzed, which contained HA in the range of 2.35–9.69 g/L. Different data preprocessing methods were applied to construct calibration models. The final optimal model was obtained with first derivative using Savitzky–Golay smoothing (9 points window, second-order polynomial and partial least squares (PLS regression with leave-one-block-out cross validation. The correlation coefficient and Root Mean Square Error of prediction set is 0.98 and 0.43 g/L, respectively, which show the possibility of NIR as a rapid method for microanalysis and to be a promising tool for a rapid assay in HA fermentation.

  6. Rapid screening of the fermentation profiles of wine yeasts by Fourier transform infrared spectroscopy.

    Science.gov (United States)

    Nieuwoudt, Hélène H; Pretorius, Isak S; Bauer, Florian F; Nel, Daniel G; Prior, Bernard A

    2006-11-01

    A rapid screening method for the evaluation of the major fermentation products of Saccharomyces wine yeasts was developed using Fourier transform infrared spectroscopy and principal component factor analysis. Calibration equations for the quantification of volatile acidity, glycerol, ethanol, reducing sugar and glucose concentrations in fermented Chenin blanc and synthetic musts were derived from the Fourier transform infrared spectra of small-scale fermentations. The accuracy of quantification of volatile acidity in both Chenin blanc and synthetic must was excellent, and the standard error of prediction was 0.07 g l(-1) and 0.08 g l(-1), respectively. The respective standard error of prediction in Chenin blanc and synthetic musts for ethanol was 0.32% v/v and 0.31% v/v, for glycerol was 0.38 g l(-1) and 0.32 g l(-1), for reducing sugar in Chenin blanc must was 0.56 g l(-1) and for glucose in synthetic must was 0.39 g l(-1). These values were in agreement with the accuracy obtained by the respective reference methods used for the quantification of the components. The screening method was applied to quantify the fermentation products of glycerol-overproducing hybrid yeasts and commercial wine yeasts. Principal component factor analysis of the fermentation data facilitated an overall comparison of the fermentation profiles (in terms of the components tested) of the strains. The potential of Fourier transform infrared spectroscopy as a tool to rapidly screen the fermentative properties of wine yeasts and to speed up the evaluation processes in the initial stages of yeast strain development programs is shown.

  7. Methods of preparation of Swazi traditional fermented foods

    OpenAIRE

    Simatende, Protus; Gadaga, Tendekayi Henry; Jabulani Nkambule, Stanley; SIWELA,Muthulisi

    2015-01-01

    Background: Fermentation is an age old technique of preserving food in many communities. A wide range of fermented products are prepared by varying the types of raw materials, utensils, and fermentation times. Several fermented foods are consumed in Swaziland. A survey of the types of fermented foods, preparation methods, and utensils used was done in the Hhohho region of Swaziland. The current study aimed at documenting the preparation methods of emahewu, emasi, umcombotsi, and buganu at hou...

  8. Rapid and efficient galactose fermentation by engineered Saccharomyces cerevisiae.

    Science.gov (United States)

    Quarterman, Josh; Skerker, Jeffrey M; Feng, Xueyang; Liu, Ian Y; Zhao, Huimin; Arkin, Adam P; Jin, Yong-Su

    2016-07-10

    In the important industrial yeast Saccharomyces cerevisiae, galactose metabolism requires energy production by respiration; therefore, this yeast cannot metabolize galactose under strict anaerobic conditions. While the respiratory dependence of galactose metabolism provides benefits in terms of cell growth and population stability, it is not advantageous for producing fuels and chemicals since a substantial fraction of consumed galactose is converted to carbon dioxide. In order to force S. cerevisiae to use galactose without respiration, a subunit (COX9) of a respiratory enzyme was deleted, but the resulting deletion mutant (Δcox9) was impaired in terms of galactose assimilation. Interestingly, after serial sub-cultures on galactose, the mutant evolved rapidly and was able to use galactose via fermentation only. The evolved strain (JQ-G1) produced ethanol from galactose with a 94% increase in yield and 6.9-fold improvement in specific productivity as compared to the wild-type strain. (13)C-metabolic flux analysis demonstrated a three-fold reduction in carbon flux through the TCA cycle of the evolved mutant with redirection of flux toward the fermentation pathway. Genome sequencing of the JQ-G1 strain revealed a loss of function mutation in a master negative regulator of the Leloir pathway (Gal80p). The mutation (Glu348*) in Gal80p was found to act synergistically with deletion of COX9 for efficient galactose fermentation, and thus the double deletion mutant Δcox9Δgal80 produced ethanol 2.4 times faster and with 35% higher yield than a single knockout mutant with deletion of GAL80 alone. When we introduced a functional COX9 cassette back into the JQ-G1 strain, the JQ-G1-COX9 strain showed a 33% reduction in specific galactose uptake rate and a 49% reduction in specific ethanol production rate as compared to JQ-G1. The wild-type strain was also subjected to serial sub-cultures on galactose but we failed to isolate a mutant capable of utilizing galactose without

  9. Effects of seed fermentation method on seed germination and vigor ...

    African Journals Online (AJOL)

    The present study was conducted to examine the influence of Lagenaria siceraria seed fermentation method on seed germination and vigor. Three seed fermentation methods (fermented in ambient air, plastic bag stored in ambient or in plastic bag buried) were tested on two cultivars during two years. Seed germination and ...

  10. Rapid and not culture-dependent assay based on multiplex PCR-SSR analysis for monitoring inoculated yeast strains in industrial wine fermentations.

    Science.gov (United States)

    Cordero-Bueso, Gustavo; Rodríguez, María Esther; Garrido, Carlos; Cantoral, Jesús Manuel

    2017-01-01

    Wine industry needs a simple method for rapid diagnosis of the dominance of inoculated strains that could be performed routinely during the fermentation process. We present a suitable, high-throughput, and low-cost method to monitor rapidly the dominance of inoculated yeast strains in industrial fermentations of red and white wines using an activated carbon cleaning pretreatment, and a rapid DNA extraction method plus multiplex PCR-SSR analysis. We apply this technique directly to samples of fermenting wines without previously isolating yeast colonies. Results are obtained in a maximum time of 4.5 h.

  11. Potential of bacterial fermentation as a biosafe method of improving ...

    African Journals Online (AJOL)

    The use of fermented liquid feeds in monogastric animal nutrition is regarded as one of the biosafe methods of animal production. This paper examines bacterial fermentation of feed substrates for production of fermented liquid feeds for pigs and moist feeds for poultry. Emphasis is placed on the interplay of factors affecting ...

  12. Method for extracting protein from a fermentation product

    Science.gov (United States)

    Lawton, Jr., John Warren; Bootsma, Jason Alan; Lewis, Stephen Michael

    2014-02-18

    A method of producing bioproducts from a feedstock in a system configured to produce ethanol and distillers grains from a fermentation product is disclosed. A system configured to process feedstock into a fermentation product and bioproducts including ethanol and meal is disclosed. A bioproduct produced from a fermentation product produced from a feedstock in a biorefining system is disclosed.

  13. Rapid determination of lovastatin in the fermentation broth of Aspergillus terreus using dual-wavelength UV spectrophotometry.

    Science.gov (United States)

    Li, Shi-Weng; Song, Hong-Ping; Leng, Yan

    2014-01-01

    Lovastatin, a hypocholesterolemic drug, is produced by submerged fermentation of Aspergillus terreus Thom (Trichocomaceae). High performance liquid chromatography is usually used to determine lovastatin in samples of the fermentation broth. However, this method is inconvenient and costly, especially in the context of high-throughput sample analysis. A direct and simple dual-wavelength ultraviolet spectrophotometric method for quantifying lovastatin in the fermentation broth of A. terreus was developed. A. terreus Z15-7 was used for all experiments. The liquid fermentation was conducted at 30 °C in a rotary shaker at 150 rpm for 15 d. Silica gel and neutral alumina column chromatography were used for the separation and purification of lovastatin from the fermentation broth. The limits of detection of lovastatin were 0.320 μg/ml in the lovastatin standard solution and 0.490 μg/ml in the fermentation broth sample and the limits of quantification of lovastatin were 1.265 μg/ml in the lovastatin standard solution and 3.955 μg/ml in the fermentation broth sample. The amounts of lovastatin in the fermentation broth ranged from 876.614 to 911.967 μg/ml, with relative standard deviations from 1.203 to 1.709%. The mean recoveries of lovastatin using silica gel and neutral alumina column chromatography were 84.2 ± 0.82 and 87.2 ± 0.21%, respectively. Dual-wavelength UV spectrophotometry is a rapid, sensitive, accurate, and convenient method for quantifying lovastatin in fermentation broth. Neutral alumina column chromatography is more efficient than silica gel column chromatography for the purification and determination lovastatin using the developed dual-wavelength UV spectrophotometry method.

  14. Rapid identification of Chinese Sauce liquor from different fermentation positions with FT-IR spectroscopy

    Science.gov (United States)

    Li, Changwen; Wei, Jiping; Zhou, Qun; Sun, Suqin

    2008-07-01

    FT-IR and two-dimensional correlation spectroscopy (2D-IR) technology were applied to discriminate Chinese Sauce liquor from different fermentation positions (top, middle and bottom of fermentation cellar) for the first time. The liquors at top, middle and bottom of fermentation cellar, possessed the characteristic peaks at 1731 cm -1, 1733 cm -1 and 1602 cm -1, respectively. In the 2D correlation infrared spectra, the differences were amplified. A strong auto-peak at 1725 cm -1 showed in the 2D spectra of the Top Liquor, which indicated that the liquor might contain some ester compounds. Different from Top Liquor, three auto-peaks at 1695, 1590 and 1480 cm -1 were identified in 2D spectra of Middle Liquor, which were the characteristic absorption of acid, lactate. In 2D spectra of Bottom Liquor, two auto-peaks at 1570 and 1485 cm -1 indicated that lactate was the major component. As a result, FT-IR and 2D-IR correlation spectra technology provided a rapid and effective method for the quality analysis of the Sauce liquor.

  15. Effect of Fermentation Methods on the Nutrient Profile and ...

    African Journals Online (AJOL)

    Objective: This study evaluated the effect of fermentation method on the nutrient profile and organoleptic characteristics of African oil bean seed (Pentaclethra macrophylla Benth). Materials and Methods: Dry and mature African oil bean seeds were cleaned, boiled, dehulled, cooked, sliced/pulverized and fermented to ugba ...

  16. Effect of Fermentation Methods on Chemical and Microbial ...

    African Journals Online (AJOL)

    Mung flours were fermented using spontaneous and backslopping methods for 72 h and microbial analysis over a period of 72 h fermentation was carried out. The samples were subjected to biochemical test, anti-nutrient and selected mineral and vitamin contents evaluation using standard methods. There was a gradual ...

  17. Potential of fermentation profiling via rapid measurement of amino acid metabolism by liquid chromatography-tandem mass spectrometry.

    Science.gov (United States)

    Dalluge, Joseph J; Smith, Sean; Sanchez-Riera, Fernando; McGuire, Chris; Hobson, Russell

    2004-07-16

    Monitoring amino acid metabolism during fermentation has significant potential from the standpoint of strain selection, optimizing growth and production in host strains, and profiling microbial metabolism and growth state. A method has been developed based on rapid quantification of underivatized amino acids using liquid chromatography-electrospray tandem mass spectrometry (LC-MS-MS) to monitor the metabolism of 20 amino acids during microbial fermentation. The use of a teicoplanin-based chiral stationary phase coupled with electrospray tandem mass spectrometry allows complete amino acid analyses in less than 4 min. Quantification is accomplished using five isotopically labeled amino acids as internal standards. Because comprehensive chromatographic separation and derivatization are not required, analysis time is significantly less than traditional reversed- or normal-phase LC-based amino acid assays. Intra-sample precisions for amino acid measurements in fermentation supernatants using this method average 4.9% (R.S.D.). Inter-day (inter-fermentation) precisions for individual amino acid measurements range from 4.2 to 129% (R.S.D.). Calibration curves are linear over the range 0-300 microg/ml, and detection limits are estimated at 50-450 ng/ml. Data visualization techniques for constructing semi-quantitative fermentation profiles of nitrogen source utilization have also been developed and implemented, and demonstrate that amino acid profiles generally correlate with observed growth profiles. Further, cellular growth events, such as lag-time and cell lysis can be detected using this methodology. Correlation coefficients for the time profiles of each amino acid measured illustrate that while several amino acids are differentially metabolized in similar fermentations, a select group of amino acids display strong correlations in these samples, indicating a sub-population of analytes that may be most useful for fermentation profiling.

  18. Evaluation of yeast diversity during wine fermentations with direct inoculation and pied de cuve method at an industrial scale.

    Science.gov (United States)

    Li, Erhu; Liu, Chuanhe; Liu, Yanlin

    2012-07-01

    The diversity and composition of yeast populations may greatly impact wine quality. This study investigated the yeast microbiota in two different types of wine fermentations: direct inoculation of a commercial starter versus pied de cuve method at an industrial scale. The pied de cuve fermentation entailed growth of the commercial inoculum used in the direct inoculation fermentation for further inoculation of additional fermentations. Yeast isolates were collected from different stages of wine fermentation and identified to the species level using Wallersterin Laboratory nutrient (WLN) agar followed by analysis of the 26S rDNA D1/D2 domain. Genetic characteristics of the Saccharomyces cerevisiae strains were assessed by a rapid PCR-based method, relying on the amplification of interdelta sequences. A total of 412 yeast colonies were obtained from all fermentations and eight different WL morphotypes were observed. Non-Saccharomyces yeast mainly appeared in the grape must and at the early stages of wine fermentation. S. cerevisiae was the dominant yeast species using both fermentation techniques. Seven distinguishing interdelta sequence patterns were found among S. cerevisiae strains, and the inoculated commercial starter, AWRI 796, dominated all stages in both direct inoculation and pied de cuve fermentations. This study revealed that S. cerevisiae was the dominant species and an inoculated starter could dominate fermentations with the pied de cuve method under controlled conditions.

  19. Comparison of three methods for accurate quantification of hydrogen sulfide during fermentation

    Energy Technology Data Exchange (ETDEWEB)

    Ugliano, Maurizio, E-mail: maurizio.ugliano@awri.com.au [Australian Wine Research Institute, PO Box 197, Glen Osmond, SA 5064 (Australia); Henschke, Paul A. [Australian Wine Research Institute, PO Box 197, Glen Osmond, SA 5064 (Australia)

    2010-02-15

    Two analytical approaches for the rapid measurement of hydrogen sulfide (H{sub 2}S) have been compared to a reference method for their potential application as a rapid procedure for the quantification of H{sub 2}S formed during alcoholic fermentations. In one case, silver nitrate, lead acetate, and mercuric chloride selective detector tubes for the analysis of H{sub 2}S in air were investigated. In the other case, a commercially available kit for the diagnosis of nitrogen starvation in wine fermentations, which is based on the detection of H{sub 2}S, was investigated. Both methods exhibited excellent linearity of response, but the mercuric chloride tube was found to suffer from interferences due to the concomitant presence of mercaptans, which resulted in erroneous H{sub 2}S quantification. A comparative study between the two methods studied and the cadmium hydroxide/methylene blue reference method commonly used to monitor H{sub 2}S indicate that the two new methods displayed better recoveries at low H{sub 2}S concentrations, besides being more rapid and economical. The two new methods were successfully used to quantify production of H{sub 2}S in different grape juice fermentations. The suitability of each method for the study of specific aspects of H{sub 2}S production during fermentation is discussed.

  20. Effects of yeast, fermentation time, and preservation methods on tarhana.

    Science.gov (United States)

    Gurbuz, Ozan; Gocmen, Duygu; Ozmen, Nese; Dagdelen, Fatih

    2010-01-01

    The physicochemical properties of tarhana soup produced with different dough treatments, fermentation times, and preservation methods were examined. Tarhana doughs were prepared with yogurt (control) or baker's yeast (Saccharomyces cerevisiae) and fermented for 3 days. Samples were taken at 24, 48, and 72 hr. Samples were then preserved via one of four methods: sun dried, dried in the shade, vacumn dried, and frozen. Frozen samples produced lower organic acid levels after 72 hr of fermentation in both control (0.68 g/100 g) and yeast (0.61 g/100 g) applications than samples that were dried (0.94 g/100 g control samples; 0.81 g/100 g samples with yeast). Increasing fermentation time resulted in a significant effect on the formation of organic acid in the tarhana (p .01). However, sensory scores for tarhana prepared from the samples dried in a sheltered area showed a reduction in color desireablilty as the fermentation time increased. The soup prepared from frozen tarhana (72 hr fermentation, with yeast) had the highest scores with respect to color, mouth feel, flavor, and overall acceptability. Vacuum-dried samples' scores in these areas were also high in comparison to the two other drying methods.

  1. Rapid HPLC analysis of amino acids and biogenic amines in wines during fermentation and evaluation of matrix effect.

    Science.gov (United States)

    Wang, Ya-Qin; Ye, Dong-Qing; Zhu, Bao-Qing; Wu, Guang-Feng; Duan, Chang-Qing

    2014-11-15

    A rapid HPLC method has been developed for the simultaneous determination of 23 amino acids, 10 biogenic amines and the ammonium ion in wine. Samples were pre-column derivatised with diethyl ethoxymethylenemalonate and separated using reversed-phase HPLC within 30 min. The matrix effect was evaluated when measuring samples taken from different stages of fermentation. Most compounds showed no obvious matrix effect, whereas proline, ethanolamine and spermine had remarkably different responses to variable concentrations of sugar. High concentrations of sugar affected the pH of the derivatisation reaction system; proline, ethanolamine and spermine derivatives were sensitive to this effect. Matrix-matched calibration was used for the quantification of these compounds. Validation of the method showed that it was accurate, reproducible and efficient for the simultaneous determination of amino acids and biogenic amines in wines during fermentation. As a specific application of the method, red wine samples taken from different stages of fermentation were analysed. Copyright © 2014 Elsevier Ltd. All rights reserved.

  2. Effects of seed fermentation method on seed germination and vigor ...

    African Journals Online (AJOL)

    BERTIN

    2013-11-27

    Nov 27, 2013 ... which seed germination and the level of percentage, macronutrients, mineral elements, and vitamins are at their highest values. We report herein results obtained from a study aimed at determining the influence of seed fermentation method on germination and seedling vigor in two cultivars of the oilseed L.

  3. Rapid production of organic fertilizer by dynamic high-temperature aerobic fermentation (DHAF) of food waste.

    Science.gov (United States)

    Jiang, Yang; Ju, Meiting; Li, Weizun; Ren, Qingbin; Liu, Le; Chen, Yu; Yang, Qian; Hou, Qidong; Liu, Yiliang

    2015-12-01

    Keep composting matrix in continuous collision and friction under a relatively high-temperature can significantly accelerate the progress of composting. A bioreactor was designed according to the novel process. Using this technology, organic fertilizer could be produced within 96h. The electric conductivity (EC) and pH value reached to a stable value of 2.35mS/cm and 7.7 after 96h of fermentation. The total carbon/total nitrogen (TC/TN) and dissolved carbon/dissolved nitrogen (DC/DN) ratio was decrease from 27.3 and 36.2 to 17.4 and 7.6 respectively. In contrast, it needed 24days to achieve the similar result in traditional static composting (TSC). Compost particles with different size were analyzed to explore the rapid degradation mechanism of food waste. The evidence of anaerobic fermentation was firstly discovered in aerobic composting. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Rapid discrimination of strain-dependent fermentation characteristics among Lactobacillus strains by NMR-based metabolomics of fermented vegetable juice.

    Directory of Open Access Journals (Sweden)

    Satoru Tomita

    Full Text Available In this study, we investigated the applicability of NMR-based metabolomics to discriminate strain-dependent fermentation characteristics of lactic acid bacteria (LAB, which are important microorganisms for fermented food production. To evaluate the discrimination capability, six type strains of Lactobacillus species and six additional L. brevis strains were used focusing on i the difference between homo- and hetero-lactic fermentative species and ii strain-dependent characteristics within L. brevis. Based on the differences in the metabolite profiles of fermented vegetable juices, non-targeted principal component analysis (PCA clearly separated the samples into those inoculated with homo- and hetero-lactic fermentative species. The separation was primarily explained by the different levels of dominant metabolites (lactic acid, acetic acid, ethanol, and mannitol. Orthogonal partial least squares discrimination analysis, based on a regions-of-interest (ROIs approach, revealed the contribution of low-abundance metabolites: acetoin, phenyllactic acid, p-hydroxyphenyllactic acid, glycerophosphocholine, and succinic acid for homolactic fermentation; and ornithine, tyramine, and γ-aminobutyric acid (GABA for heterolactic fermentation. Furthermore, ROIs-based PCA of seven L. brevis strains separated their strain-dependent fermentation characteristics primarily based on their ability to utilize sucrose and citric acid, and convert glutamic acid and tyrosine into GABA and tyramine, respectively. In conclusion, NMR metabolomics successfully discriminated the fermentation characteristics of the tested strains and provided further information on metabolites responsible for these characteristics, which may impact the taste, aroma, and functional properties of fermented foods.

  5. Rapid discrimination of strain-dependent fermentation characteristics among Lactobacillus strains by NMR-based metabolomics of fermented vegetable juice.

    Science.gov (United States)

    Tomita, Satoru; Saito, Katsuichi; Nakamura, Toshihide; Sekiyama, Yasuyo; Kikuchi, Jun

    2017-01-01

    In this study, we investigated the applicability of NMR-based metabolomics to discriminate strain-dependent fermentation characteristics of lactic acid bacteria (LAB), which are important microorganisms for fermented food production. To evaluate the discrimination capability, six type strains of Lactobacillus species and six additional L. brevis strains were used focusing on i) the difference between homo- and hetero-lactic fermentative species and ii) strain-dependent characteristics within L. brevis. Based on the differences in the metabolite profiles of fermented vegetable juices, non-targeted principal component analysis (PCA) clearly separated the samples into those inoculated with homo- and hetero-lactic fermentative species. The separation was primarily explained by the different levels of dominant metabolites (lactic acid, acetic acid, ethanol, and mannitol). Orthogonal partial least squares discrimination analysis, based on a regions-of-interest (ROIs) approach, revealed the contribution of low-abundance metabolites: acetoin, phenyllactic acid, p-hydroxyphenyllactic acid, glycerophosphocholine, and succinic acid for homolactic fermentation; and ornithine, tyramine, and γ-aminobutyric acid (GABA) for heterolactic fermentation. Furthermore, ROIs-based PCA of seven L. brevis strains separated their strain-dependent fermentation characteristics primarily based on their ability to utilize sucrose and citric acid, and convert glutamic acid and tyrosine into GABA and tyramine, respectively. In conclusion, NMR metabolomics successfully discriminated the fermentation characteristics of the tested strains and provided further information on metabolites responsible for these characteristics, which may impact the taste, aroma, and functional properties of fermented foods.

  6. Rapid methods for detection of bacteria

    DEFF Research Database (Denmark)

    Corfitzen, Charlotte B.; Andersen, B.Ø.; Miller, M.

    2006-01-01

    Traditional methods for detection of bacteria in drinking water e.g. Heterotrophic Plate Counts (HPC) or Most Probable Number (MNP) take 48-72 hours to give the result. New rapid methods for detection of bacteria are needed to protect the consumers against contaminations. Two rapid methods...

  7. Influence of Fermentation Methods on Neutral Detergent Fiber Degradation Parameters

    DEFF Research Database (Denmark)

    Bossen, D; Mertens, D R; Weisbjerg, M R

    2008-01-01

    The effect of 3 fermentation methods, in situ (IS) in 4 lactating cows (average pH of 5.8), in vitro (IVn) with media pH of 6.8, or in vitro (IVa) with media pH adjusted to 6.0 using citric acid, on fiber degradation parameters was studied using feeds ground to different particle sizes. Corn silage...

  8. Innovative rapid construction/reconstruction methods.

    Science.gov (United States)

    2005-07-01

    Innovative construction and reconstruction methods provide the opportunity to significantly reduce the time of roadway projects while maintaining the necessary quality of workmanship. The need for these rapid methods stems from the increase in ...

  9. Microbiological Study of Lactic Acid Fermentation of Caper Berries by Molecular and Culture-Dependent Methods

    OpenAIRE

    Pérez Pulido, Rubén; Ben Omar, Nabil; Abriouel, Hikmate; Lucas López, Rosario; Martínez Cañamero, Magdalena; Gálvez, Antonio

    2005-01-01

    Fermentation of capers (the fruits of Capparis sp.) was studied by molecular and culture-independent methods. A lactic acid fermentation occurred following immersion of caper berries in water, resulting in fast acidification and development of the organoleptic properties typical of this fermented food. A collection of 133 isolates obtained at different times of fermentation was reduced to 75 after randomly amplified polymorphic DNA (RAPD)-PCR analysis. Isolates were identified by PCR or 16S r...

  10. Influence of fermentation methods on neutral detergent fiber degradation parameters.

    Science.gov (United States)

    Bossen, D; Mertens, D R; Weisbjerg, M R

    2008-04-01

    The effect of 3 fermentation methods, in situ (IS) in 4 lactating cows (average pH of 5.8), in vitro (IVn) with media pH of 6.8, or in vitro (IVa) with media pH adjusted to 6.0 using citric acid, on fiber degradation parameters was studied using feeds ground to different particle sizes. Corn silage (CS), grass silage (GS), barley grain (B), sugar beet pulp (BP), and rapeseed cake (RC) were ground using a shear mill. Silages were ground through 8-, 4-, 2-, or 1-mm screens, B and BP through 4-, 2-, or 1-mm screens, and RC through 2- or 1-mm screens. The amylase-treated NDF (aNDF) content of samples ground using a 1-mm screen was 399, 431, 197, 480, and 251 g/kg of DM for CS, GS, B, BP, and RC, respectively, but increased with increasing screen size. Materials were incubated for 0, 6, 12, 24, 48, and 96 h IS, IVn, or IVa. Inoculum for IVn and IVa was prepared as a composite from the cows used for IS. The potentially degradable aNDF (D(0)), indegradable aNDF (I), lag time (L), and fractional rate of degradation of potential degradable aNDF (k(d)) were estimated using PROC NLIN in SAS. Except for RC, fermentation methods affected most degradation parameters, especially k(d) and L. The IVn, IVa, and IS methods resulted in k(d) values of 0.291, 0.105, 0.080 h(-1) and 0.262, 0.107, 0.103 h(-1) for BP and RC, respectively, demonstrating a decreasing rate of degradation for these feeds when fermented under suboptimal pH. In CS, GS, and B, no difference was found in k(d) between the IVn and IVa methods, which suggests that differences in pH did not alter k(d) in vitro. The k(d) values obtained for CS, GS, and B were 0.058, 0.109, 0.168, and 0.028, 0.054, and 0.069 h(-1) for the IVn and IS methods, respectively, indicating that the IS method using cows fed at production levels can underestimate the potential rate of NDF degradation. Using the IVa method, L was 12.1, 9.1, 7.8, and 2.5 h for CS, GS, BP, and RC, respectively, which was higher than L obtained from the IVn and IS

  11. The microbiology of Ghanaian cocoa fermentations analysed using culture-dependent and culture-independent methods.

    Science.gov (United States)

    Nielsen, D S; Teniola, O D; Ban-Koffi, L; Owusu, M; Andersson, T S; Holzapfel, W H

    2007-03-10

    Export of cocoa beans is of great economic importance in Ghana and several other tropical countries. Raw cocoa has an astringent unpleasant taste and a spontaneous fermentation is the first step in a process leading to cocoa beans with the characteristic cocoa flavour and taste. The microbiology of Ghanaian cocoa fermentations was investigated using culture-dependent and culture-independent methods. Samples were collected at 12 hour intervals during 96-144 hour tray and traditional heap fermentations. Yeast, Lactic Acid Bacteria (LAB), Acetic Acid Bacteria (AAB) and Bacillus spp. were enumerated on suitable substrates and identified using phenotypic and molecular methods. The yeast and bacterial micro-populations involved in the cocoa fermentation were further investigated using the culture-independent method Denaturing Gradient Gel Electrophopresis (DGGE). A microbiological succession was observed during the fermentations. At the onset of fermentation yeasts were the dominating microorganisms. Lactic Acid Bacteria became dominant after 12-24 h of fermentation and remained predominant throughout the fermentations with AAB reaching high counts in the mid phase of fermentation. Bacillus spp. were only detected during heap fermentations where they reached high numbers during the later stages of fermentation. Hanseniaspora guilliermondii was the predominant yeast during the initial phase and Pichia membranifaciens during the later phases of fermentation. A number of other yeast species including three putatively undescribed species were isolated during the fermentations. Lactobacillus fermentum was the dominant LAB in most samples. Several other LAB including Lactobacillus plantarum, Leuconostoc pseudomesenteroides, Leuconostoc pseudoficulneum, Pediocococcus acidilactici and a putatively undescribed LAB species were detected during the fermentations. Acetobacter syzygii, Acetobacter pasteurianus and Acetobacter tropicalis were the predominant AAB in all investigated

  12. Investigating of yeast species in wine fermentation using terminal restriction fragment length polymorphism method.

    Science.gov (United States)

    Sun, Yue; Liu, Yanlin

    2014-04-01

    The objective of this study was to examine the potential of terminal restriction fragment length polymorphism (T-RFLP) in monitoring yeast communities during wine fermentation and to reveal new information on yeast community of Chinese enology. Firstly, terminal restriction fragment (TRF) lengths database was constructed using 32 pure yeast species. Ten of these species were firstly documented. The species except for Candida vini, Issatchenkia orientalis/Candida krusei, Saccharomyces bayanus, Saccharomyces pastorianus, Saccharomyces cerevisiae, Saccharomyces kudriarzevii and Zygosaccharomyces bisporus could be distinguished by the T-RFLP targeting 5.8S-ITS rDNA. Moreover, the yeast communities in spontaneous fermentation of Chardonnay and Riesling were identified by T-RFLP and traditional methods, including colony morphology on Wallerstein Nutrient (WLN) medium and 5.8S-ITS-RFLP analysis. The result showed that T-RFLP profiles of the yeast community correlated well with that of the results identified by the traditional methods. The TRFs with the highest intensity and present in all the samples corresponded to Saccharomyces sp. Other species detected by both approaches were Hanseniaspora uvarum, Metschnikowia pulcherrima, Pichia minuta var. minuta, Saccharomycodes ludwigii/Torulaspora delbrueckii and Candida zemplinina. This study revealed that T-RFLP technique is a rapid and useful tool for monitoring the composition of yeast species during wine fermentation. Copyright © 2013 Elsevier Ltd. All rights reserved.

  13. Quality and characteristics of fermented ginseng seed oil based on bacterial strain and extraction method.

    Science.gov (United States)

    Lee, Myung-Hee; Rhee, Young-Kyoung; Choi, Sang-Yoon; Cho, Chang-Won; Hong, Hee-Do; Kim, Kyung-Tack

    2017-07-01

    In this study, the fermentation of ginseng seeds was hypothesized to produce useful physiologically-active substances, similar to that observed for fermented ginseng root. Ginseng seed was fermented using Bacillus, Pediococcus, and Lactobacillus strains to extract ginseng seed oil, and the extraction yield, color, and quantity of phenolic compounds, fatty acids, and phytosterol were then analyzed. The ginseng seed was fermented inoculating 1% of each strain on sterilized ginseng seeds and incubating the seeds at 30°C for 24 h. Oil was extracted from the fermented ginseng seeds using compression extraction, solvent extraction, and supercritical fluid extraction. The color of the fermented ginseng seed oil did not differ greatly according to the fermentation or extraction method. The highest phenolic compound content recovered with the use of supercritical fluid extraction combined with fermentation using the Bacillus subtilis Korea Food Research Institute (KFRI) 1127 strain. The fatty acid composition did not differ greatly according to fermentation strain and extraction method. The phytosterol content of ginseng seed oil fermented with Bacillus subtilis KFRI 1127 and extracted using the supercritical fluid method was highest at 983.58 mg/100 g. Therefore, our results suggested that the ginseng seed oil fermented with Bacillus subtilis KFRI 1127 and extracted using the supercritical fluid method can yield a higher content of bioactive ingredients, such as phenolics, and phytosterols, without impacting the color or fatty acid composition of the product.

  14. A new method for rapid Canine retraction

    Directory of Open Access Journals (Sweden)

    "Khavari A

    2001-06-01

    Full Text Available Distraction osteogenesis method (Do in bone lengthening and rapid midpalatal expansion have shown the great ability of osteognic tissues for rapid bone formation under distraction force and special protocol with optimum rate of one millimeter per day. Periodontal membrane of teeth (PDM is the extension of periostium in the alveolar socked. Orthodontic force distracts PDM fibers in the tension side and then bone formation will begin.Objects: Rapid retraction of canine tooth into extraction space of first premolar by DO protocol in order to show the ability of the PDM in rapid bone formation. The other objective was reducing total orthodontic treatment time of extraction cases.Patients and Methods: Tweleve maxillary canines in six patients were retracted rapidly in three weeks by a custom-made tooth-born appliance. Radiographic records were taken to evaluate the effects of heavy applied force on canine and anchorage teeth.Results: Average retraction was 7.05 mm in three weeks (2.35 mm/week. Canines rotated distal- in by mean 3.5 degrees.Anchorage loss was from 0 to 0.8 mm with average of 0.3 mm.Root resorption of canines was negligible, and was not significant clinically. Periodontium was normal after rapid retraction. No hazard for pulp vitality was observed.Discussion: PDM responded well to heavy distraction force by Do protocol. Rapid canine retraction seems to be a safe method and can considerabely reduce orthodontic time.

  15. A scoping review of rapid review methods.

    Science.gov (United States)

    Tricco, Andrea C; Antony, Jesmin; Zarin, Wasifa; Strifler, Lisa; Ghassemi, Marco; Ivory, John; Perrier, Laure; Hutton, Brian; Moher, David; Straus, Sharon E

    2015-09-16

    Rapid reviews are a form of knowledge synthesis in which components of the systematic review process are simplified or omitted to produce information in a timely manner. Although numerous centers are conducting rapid reviews internationally, few studies have examined the methodological characteristics of rapid reviews. We aimed to examine articles, books, and reports that evaluated, compared, used or described rapid reviews or methods through a scoping review. MEDLINE, EMBASE, the Cochrane Library, internet websites of rapid review producers, and reference lists were searched to identify articles for inclusion. Two reviewers independently screened literature search results and abstracted data from included studies. Descriptive analysis was conducted. We included 100 articles plus one companion report that were published between 1997 and 2013. The studies were categorized as 84 application papers, seven development papers, six impact papers, and four comparison papers (one was included in two categories). The rapid reviews were conducted between 1 and 12 months, predominantly in Europe (58 %) and North America (20 %). The included studies failed to report 6 % to 73 % of the specific systematic review steps examined. Fifty unique rapid review methods were identified; 16 methods occurred more than once. Streamlined methods that were used in the 82 rapid reviews included limiting the literature search to published literature (24 %) or one database (2 %), limiting inclusion criteria by date (68 %) or language (49 %), having one person screen and another verify or screen excluded studies (6 %), having one person abstract data and another verify (23 %), not conducting risk of bias/quality appraisal (7 %) or having only one reviewer conduct the quality appraisal (7 %), and presenting results as a narrative summary (78 %). Four case studies were identified that compared the results of rapid reviews to systematic reviews. Three studies found that the conclusions between

  16. Techno-economical study of ethanol and biogas from spruce wood by NMMO-pretreatment and rapid fermentation and digestion.

    Science.gov (United States)

    Shafiei, Marzieh; Karimi, Keikhosro; Taherzadeh, Mohammad J

    2011-09-01

    Given that N-methylmorpholine-N-oxide (NMMO) is a promising alternative for the pretreatment of lignocelluloses, a novel process for ethanol and biogas production from wood was developed. The solvent, NMMO, is concentrated by multistage evaporation, and the wood is pretreated with the concentrated NMMO. Thereafter, ethanol is produced by the non-isothermal simultaneous saccharification and fermentation (NSSF) method, which is a rapid and efficient process. The wastewater is treated by upflow anaerobic sludge blanket (UASB) digester for rapid production of biogas. The process was simulated by Aspen plus®. Using mechanical vapor recompression for evaporators in the pretreatment and multi-pressure distillation columns, the energy requirements for the process were minimized. The economical feasibility of the developed biorefinery for five different plant capacities was studied by Aspen Icarus Process Evaluator. The base case was designed to utilize 200,000 tons of spruce wood per year and required M€ 58.3 as the total capital investment, while the production cost of ethanol is calculated to be €/l 0.44. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. A Bradford multiplexing method for protein estimation in fermented foods: Soy sauces

    Directory of Open Access Journals (Sweden)

    Shruti Shukla

    2016-03-01

    Full Text Available Proteins for foods, in addition to providing nutrition, should also possess specific functional properties that facilitate processing and serve as the basis of product performance. Soy protein is a major component of the diet of food and is increasingly important in the human diet. Hence, here in the present article, we are focusing a rapid and easy method for quantitative determination of total protein content with multiplex samples in any food products such as soy sauce or other traditional fermented foods. We described a bioassay procedure (Bradford method for the evaluation of total protein content in foods. This method involves measurement of the protein efficiency ratio under standardized conditions. The experiment will provide researchers a scientific way to determine pretentious quality of variety of foods and/or health supplements.

  18. Use of the backslopping method for accelerated and nutritionally enriched idli fermentation.

    Science.gov (United States)

    Shrivastava, Neha; Ananthanarayan, Laxmi

    2015-08-15

    Idli is a cereal-legume-based fermented food, widely consumed in India. It is popular for its nutritional content, sour taste and appetising aroma. The fermentation time of idli batter varies from 12 to 14 h. A reduction in fermentation time of idli batter is of great significance for large-scale idli production units since it will reduce the batch time and will lead to a greater output. Accelerated fermentation can be potentially achieved by using the backslopping method. The inoculum for backslopping was optimally fermented (12 h) idli batter, dried at room temperature. Backslopping reduced the fermentation time of idli batter from the conventional 12 h to 3 h while successfully maintaining sensory attributes of the product. In the idlis prepared by backslopped expedited batter, thiamine was found to be 50% higher; while reduction of anti-nutrients phytate (11%) and trypsin inhibitor (16%) was higher than the conventionally fermented (12 h) idli batter. Backslopping not only accelerated idli batter fermentation but also enhanced its nutritional value. A similar process can be designed for other fermented foods, to expedite fermentation thus reducing the time requirement. © 2014 Society of Chemical Industry.

  19. Potential of bacterial fermentation as a biosafe method of improving ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-05-04

    May 4, 2009 ... Fermented fish silage supplementation in quail diet. Increase in egg production and quality. (Haugh unit). (Zynudheen et al., 2008). Kocuria rosea. Poultry feathers. (fermented feather meal). -. Improved content and availability of amino acids, lysine 3.46%, histidine 0.94%, methionine 0.69%. (Bertsch et al.,.

  20. Rapid determination of capsaicinoids by colorimetric method

    OpenAIRE

    Ryu, Wang-Kyun; Kim, Hee-Woong; Kim, Geun-Dong; Rhee, Hae-Ik

    2016-01-01

    Capsaicinoids, the pungent component of chili peppers, are generally analyzed by precise analytical techniques, such as gas chromatography and high-performance liquid chromatography (HPLC), but these are not practical for the mass analyses of samples. To analyze mass samples rapidly, a colorimetric method was suggested. In this work, pigments and capsaicinoids were efficiently separated from chili pepper extract by sequential solid–liquid extraction and liquid–liquid extraction in test tubes ...

  1. Method for the production of a fermentation product from an organism

    NARCIS (Netherlands)

    Van Hee, P.; Van der Wielen, L.A.M.; Van der Lans, R.G.J.M.

    2005-01-01

    The invention relates to a method for the production of a fermentation product from an organism cultured in a culture medium, wherein the organism after the formation of the fermentation product is subjected to a lysis treatment in the presence of a lysis-promoting compound. In accordance with the

  2. Study on the Removal of Cadmium in Rice Using Microbial Fermentation Method.

    Science.gov (United States)

    Zhang, Ling; Lei, Qunying; Cheng, Yuliang; Xie, Yunfei; Qian, He; Guo, Yahui; Chen, Yi; Yao, Weirong

    2017-06-01

    This work mainly examined how to remove cadmium in rice by fermentation, the removal mechanisms, and the quality of fermented rice in order to utilize cadmium-contaminated rice. The fermentation time, temperature, liquid ratio, inoculant levels, and number of washes were varied to optimize the efficiency of cadmium removal. The optimum fermentation process, in which the rate of cadmium removal from the rice is 80.84%, required an inoculant amount of 0.1%, a liquid ratio of 1:1, a period of 60 h at 37 °C, and subsequently washed with water 4 times. The physicochemical properties of raw cadmium-contaminated rice and fermented rice were studied. Results showed that the pasting temperature of the fermented rice became lower, and temperature at which pasting starts dropped but the endothermic enthalpy increased, implying that the protein content in the rice decreased during the fermentation. It suggested that the crystal structure of rice starch changed and fermentation did not result in the formation of new chemical bonds or functional groups in the rice. Microbial fermentation method can therefore effectively reduce cadmium level in contaminated rice. © 2017 Institute of Food Technologists®.

  3. A Simple Method for the Efficient Isolation of Genomic DNA from Lactobacilli Isolated from Traditional Indian Fermented Milk (dahi).

    Science.gov (United States)

    De, Sachinandan; Kaur, Gurpreet; Roy, Amit; Dogra, Gaurav; Kaushik, Ramakant; Yadav, Paras; Singh, Rameshwar; Datta, Tirtha Kumar; Goswami, Surender Lal

    2010-10-01

    A simple, inexpensive and effective genomic DNA isolation procedure for Lactobacillus isolates from traditional Indian fermented milk (dahi) is described. A total of 269 Lactobacillus isolates from fermented milk collected from four places in North and west India were tested for lysis by an initial weakening of the Gram positive cell wall with Ampicillin followed by Lysozyme treatment. The average genomic DNA yield was ~50 μg/ml log phase culture. Quality and repeatability of the method was found to be adequate for subsequent molecular applications. The quality of the genomic DNA isolated by this method was verified by restriction digestion and polymerase chain reaction (PCR). No inhibition was observed in subsequent PCR amplification and restriction digestion. The presented method is rapid, cheap and useful for routine DNA isolation from gram positive bacteria such as Lactobacillus.

  4. Genes related to xylose fermentation and methods of using same for enhanced biofuel production

    Energy Technology Data Exchange (ETDEWEB)

    Wohlbach, Dana J.; Gasch, Audrey P.

    2015-09-29

    The present invention provides isolated gene sequences involved in xylose fermentation and related recombinant yeast which are useful in methods of enhanced biofuel production, particularly ethanol production. Methods of bioengineering recombinant yeast useful for biofuel production are also provided.

  5. Genes related to xylose fermentation and methods of using same for enhanced biofuel production

    Science.gov (United States)

    Wohlbach, Dana J.; Gasch, Audrey P.

    2014-08-05

    The present invention provides isolated gene sequences involved in xylose fermentation and related recombinant yeast which are useful in methods of enhanced biofuel production, particularly ethanol production. Methods of bioengineering recombinant yeast useful for biofuel production are also provided.

  6. Genes related to xylose fermentation and methods of using same for enhanced biofuel production

    Energy Technology Data Exchange (ETDEWEB)

    Wohlbach, Dana J.; Gasch, Audrey P.

    2016-11-29

    The present invention provides isolated gene sequences involved in xylose fermentation and related recombinant yeast which are useful in methods of enhanced biofuel production, particularly ethanol production. Methods of bioengineering recombinant yeast useful for biofuel production are also provided.

  7. Rapid Column Extraction method for SoilRapid Column Extraction method for Soil

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Sherrod, L. III; Culligan, Brian K.

    2005-11-07

    The analysis of actinides in environmental soil and sediment samples is very important for environmental monitoring as well as for emergency preparedness. A new, rapid actinide separation method has been developed and implemented that provides total dissolution of large soil samples, high chemical recoveries and effective removal of matrix interferences. This method uses stacked TEVA Resin{reg_sign}, TRU Resin{reg_sign} and DGA-Resin{reg_sign} cartridges from Eichrom Technologies (Darien, IL, USA) that allows the rapid separation of plutonium (Pu) neptunium (Np), uranium (U), americium (Am), and curium (Cm) using a single multi-stage column combined with alpha spectrometry. The method combines a rapid fusion step for total dissolution to dissolve refractory analytes and matrix removal using cerium fluoride precipitation to remove the difficult soil matrix. By using vacuum box cartridge technology with rapid flow rates, sample preparation time is minimized.

  8. Response of microbial community of organic-matter-impoverished arable soil to long-term application of soil conditioner derived from dynamic rapid fermentation of food waste

    National Research Council Canada - National Science Library

    Jiaqi Hou; Mingxiao Li; Xuhui Mao; Yan Hao; Jie Ding; Dongming Liu; Beidou Xi; Hongliang Liu

    2017-01-01

    .... Herein, dynamic rapid fermentation (DRF) of food waste was performed to develop a soil conditioner and the successions and diversity of bacterial communities in an organic-matter-impoverished arable soil after six years of application...

  9. AO–MW–PLS method applied to rapid quantification of teicoplanin with near-infrared spectroscopy

    Directory of Open Access Journals (Sweden)

    Jiemei Chen

    2017-01-01

    Full Text Available Teicoplanin (TCP is an important lipoglycopeptide antibiotic produced by fermenting Actinoplanes teichomyceticus. The change in TCP concentration is important to measure in the fermentation process. In this study, a reagent-free and rapid quantification method for TCP in the TCP–Tris–HCl mixture samples was developed using near-infrared (NIR spectroscopy by focusing our attention on the fermentation process for TCP. The absorbance optimization (AO partial least squares (PLS was proposed and integrated with the moving window (MW PLS, which is called AO–MW–PLS method, to select appropriate wavebands. A model set that includes various wavebands that were equivalent to the optimal AO–MW–PLS waveband was proposed based on statistical considerations. The public region of all equivalent wavebands was just one of the equivalent wavebands. The obtained public regions were 1540–1868nm for TCP and 1114–1310nm for Tris. The root-mean-square error and correlation coefficient for leave-one-out cross validation were 0.046mg mL−1 and 0.9998mg mL−1 for TCP, and 0.235mg mL−1 and 0.9986mg mL−1 for Tris, respectively. All the models achieved highly accurate prediction effects, and the selected wavebands provided valuable references for designing specialized spectrometers. This study provided a valuable reference for further application of the proposed methods to TCP fermentation broth and to other spectroscopic analysis fields.

  10. Rapid determination of capsaicinoids by colorimetric method.

    Science.gov (United States)

    Ryu, Wang-Kyun; Kim, Hee-Woong; Kim, Geun-Dong; Rhee, Hae-Ik

    2017-10-01

    Capsaicinoids, the pungent component of chili peppers, are generally analyzed by precise analytical techniques, such as gas chromatography and high-performance liquid chromatography (HPLC), but these are not practical for the mass analyses of samples. To analyze mass samples rapidly, a colorimetric method was suggested. In this work, pigments and capsaicinoids were efficiently separated from chili pepper extract by sequential solid-liquid extraction and liquid-liquid extraction in test tubes followed by a colorimetric analysis on the capsaicinoids by a selective chromogenic reaction with Gibbs reagent (2,6-dichloroquinone-4-chloroimide). In the comparison of the capsaicinoid content by the colorimetric method and HPLC using acetone extracts of fresh pepper and dry red pepper as samples, R2 was 0.9973 and 0.9816, respectively, which shows a high linear correlation. In addition, a minimum of 1 μg/mL capsaicinoids can be detected and it was therefore determined that the method can efficiently analyze a great quantity of samples in a short time. Copyright © 2016. Published by Elsevier B.V.

  11. Rapid determination of capsaicinoids by colorimetric method

    Directory of Open Access Journals (Sweden)

    Wang-Kyun Ryu

    2017-10-01

    Full Text Available Capsaicinoids, the pungent component of chili peppers, are generally analyzed by precise analytical techniques, such as gas chromatography and high-performance liquid chromatography (HPLC, but these are not practical for the mass analyses of samples. To analyze mass samples rapidly, a colorimetric method was suggested. In this work, pigments and capsaicinoids were efficiently separated from chili pepper extract by sequential solid–liquid extraction and liquid–liquid extraction in test tubes followed by a colorimetric analysis on the capsaicinoids by a selective chromogenic reaction with Gibbs reagent (2,6-dichloroquinone-4-chloroimide. In the comparison of the capsaicinoid content by the colorimetric method and HPLC using acetone extracts of fresh pepper and dry red pepper as samples, R2 was 0.9973 and 0.9816, respectively, which shows a high linear correlation. In addition, a minimum of 1 μg/mL capsaicinoids can be detected and it was therefore determined that the method can efficiently analyze a great quantity of samples in a short time.

  12. Methods for sequestering carbon dioxide into alcohols via gasification fermentation

    Science.gov (United States)

    Gaddy, James L; Ko, Ching-Whan; Phillips, J. Randy; Slape, M. Sean

    2013-11-26

    The present invention is directed to improvements in gasification for use with synthesis gas fermentation. Further, the present invention is directed to improvements in gasification for the production of alcohols from a gaseous substrate containing at least one reducing gas containing at least one microorganism.

  13. Effects of seed fermentation method on seed germination and vigor ...

    African Journals Online (AJOL)

    BERTIN

    2013-11-27

    Nov 27, 2013 ... Seeds from the other treatments were extracted after a. 10-day fermentation period (practice widely used by farmers) then washed and dried until 6-7% moisture. After drying, seeds with similar weights (310 ± 76 mg) were selected for germination and vigor evaluation. This mean was determined on the ...

  14. Rapid monitoring of the fermentation process for Korean traditional rice wine 'Makgeolli' using FT-NIR spectroscopy

    Science.gov (United States)

    Kim, Dae-Yong; Cho, Byoung-Kwan

    2015-11-01

    The quality parameters of the Korean traditional rice wine "Makgeolli" were monitored using Fourier transform near-infrared (FT-NIR) spectroscopy with multivariate statistical analysis (MSA) during fermentation. Alcohol, reducing sugar, and titratable acid were the parameters assessed to determine the quality index of fermentation substrates and products. The acquired spectra were analyzed with partial least squares regression (PLSR). The best prediction model for alcohol was obtained with maximum normalization, showing a coefficient of determination (Rp2) of 0.973 and a standard error of prediction (SEP) of 0.760%. In addition, the best prediction model for reducing sugar was obtained with no data preprocessing, with a Rp2 value of 0.945 and a SEP of 1.233%. The prediction of titratable acidity was best with mean normalization, showing a Rp2 value of 0.882 and a SEP of 0.045%. These results demonstrate that FT-NIR spectroscopy can be used for rapid measurements of quality parameters during Makgeolli fermentation.

  15. Culture Condition Improvement for Phytase Production in Solid State Fermentation by Aspergillus ficuum Using Statistical Method

    OpenAIRE

    Jafari-Tapeh, H.; Z. Hamidi-Esfahani; Azizi, M. H.

    2012-01-01

    The effective factors on phytase production by Aspergillus ficuum PTCC 5288 were studied using solid-state fermentation method in 250 ml shake flask. The effective process parameters on phytase production were identified using Plackett-Burman design. Four factors were identified of different variables, including glucose, moisture, MgSO4, and fermentation time, which were the most significant. The optimum levels of these significant parameters were determined through response surface methodolo...

  16. Methods of preparation of Swazi traditional fermented foods

    Directory of Open Access Journals (Sweden)

    Protus Simatende

    2015-09-01

    Conclusion: Umcombotsi, emahewu, buganu, and emasi were the fermented foods commonly prepared at a household level in the Hhohho region, Swaziland. The main ingredient used for preparing umcombotsi and emahewu was maize meal. Unmilled sorghum malt was also added during preparation of umcombotsi. However, typically no malt was added during the preparation of emahewu. Buganu and emasi also play an important role in the diet and socioeconomic activities of the population in Swaziland.

  17. Towards an improved global antioxidant response method (GAR+): Physiological-resembling in vitro digestion-fermentation method.

    Science.gov (United States)

    Pérez-Burillo, S; Rufián-Henares, J A; Pastoriza, S

    2018-01-15

    The antioxidant capacity of food influences its shelf life and human health. To determine this parameter, the corresponding antioxidant species must first be extracted. Current methods don't adequately address this issue since they rely on extractions with organic solvents or on in vitro digestion without a subsequent fermentation. We present an improved protocol to determine the global antioxidant response of foods (GAR+) including both in vitro digestion and fermentation. All samples should be fermented with the same fresh faecal inoculum in order to decrease variability. In addition, the use of a pool of faeces from healthy donors is strongly recommended to improve repeatability. Although most antioxidant capacity is achieved after digestion, in some foods fermentation plays a role. Thus, the GAR+ method provides reliable values of the antioxidant capacity of foods that are closer to their in vivo activity by including the effects of gut microbiota over non-digested nutrients. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Method for ph-controlled fermentation and biogas production

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention is in the field of biomass processing and bioenergy production and facilitates efficient biomass processing and an increased production of renewable energy from processing and anaerobic fermentation of a wide variety of organic materials. In order to control the pH value of ...... of the biomass during processing thereof, a CO 2 containing gas, such as e.g. biogas or flue gas, is added to the biomass present in the buffer tank and/or in the anaerobic digester operably linked to the buffer tank...

  19. Culture-dependent and -independent methods to investigate the microbial ecology of Italian fermented sausages.

    Science.gov (United States)

    Rantsiou, Kalliopi; Urso, Rosalinda; Iacumin, Lucilla; Cantoni, Carlo; Cattaneo, Patrizia; Comi, Giuseppe; Cocolin, Luca

    2005-04-01

    In this study, the microbial ecology of three naturally fermented sausages produced in northeast Italy was studied by culture-dependent and -independent methods. By plating analysis, the predominance of lactic acid bacteria populations was pointed out, as well as the importance of coagulase-negative cocci. Also in the case of one fermentation, the fecal enterocci reached significant counts, highlighting their contribution to the particular transformation process. Yeast counts were higher than the detection limit (> 100 CFU/g) in only one fermented sausage. Analysis of the denaturing gradient gel electrophoresis (DGGE) patterns and sequencing of the bands allowed profiling of the microbial populations present in the sausages during fermentation. The bacterial ecology was mainly characterized by the stable presence of Lactobacillus curvatus and Lactobacillus sakei, but Lactobacillus paracasei was also repeatedly detected. An important piece of evidence was the presence of Lactococcus garvieae, which clearly contributed in two fermentations. Several species of Staphylococcus were also detected. Regarding other bacterial groups, Bacillus sp., Ruminococcus sp., and Macrococcus caseolyticus were also identified at the beginning of the transformations. In addition, yeast species belonging to Debaryomyces hansenii, several Candida species, and Willopsis saturnus were observed in the DGGE gels. Finally, cluster analysis of the bacterial and yeast DGGE profiles highlighted the uniqueness of the fermentation processes studied.

  20. Culture independent methods to assess the diversity and dynamics of microbiota during food fermentation.

    Science.gov (United States)

    Cocolin, Luca; Alessandria, Valentina; Dolci, Paola; Gorra, Roberta; Rantsiou, Kalliopi

    2013-10-01

    Culture independent methods first appeared in the food microbiology field at the end of the 90s and since then they have been applied extensively. These methods do not rely on cultivation and target nucleic acids (DNA and RNA) to identify and follow the changes that occur in the main populations present in a specific ecosystem. The method that has most often been used as a culture independent method in food microbiology is denaturing gradient gel electrophoresis (DGGE). The number of papers dealing with DGGE grew exponentially in the late nineties and, by analysing the studies available in the literature, it is possible to describe a trend in the subjects that have been investigated. DGGE was first used as a tool to monitor the ecology of fermented food, such as fermented sausage, cheese and sourdough, and later it also showed its potential in microbial spoilage process. In the last few years, the main application of DGGE has been to study fermented food from Asia, Africa and South America. The information collected using DGGE has made it possible to confirm the existing knowledge on food fermentation and spoilage. However, in some cases, new evidence that helps scientists to fully comprehend a specific microbial ecosystem has emerged. In this review, the roadmap of culture independent methods in food microbiology will be summarized, focusing on the DGGE technique. Examples of how this approach is useful to obtain a better understanding of microbial diversity are reported for several kinds of fermented food, such as fermented sausage, cheese and wine. The future of culture independent methods in food microbiology, with the increasing availability of next generation sequencing techniques, is also discussed. Copyright © 2013 Elsevier B.V. All rights reserved.

  1. Evaluation of an in vitro fibre fermentation method using feline faecal inocula

    NARCIS (Netherlands)

    Bosch, Guido; Heesen, Lisa; Melo Santos, de Karine; Pellikaan, Wilbert F.; Cone, John W.; Hendriks, Wouter H.

    2017-01-01

    To gain knowledge on the precision of an in vitro method for characterisation of the fermentability of dietary fibres, this study aimed to evaluate the repeatability and reproducibility of such a method. Substrates used were citrus pectin (CP), fructo-oligosaccharides (FOS), guar gum (GG), sugar

  2. Rapid enzyme production and mycelial growth in solid-state fermentation using the non-airflow box.

    Science.gov (United States)

    Ito, Kazunari; Gomi, Katsuya; Kariyama, Masahiro; Miyake, Tsuyoshi

    2013-11-01

    Solid-state fermentation (SSF) has become an attractive alternative to submerged fermentation (SMF) for the production of enzymes, organic acids, and secondary metabolites, while there are many problems during the culture of SSF. We recently created a SSF system using a non-airflow box (NAB) in order to resolve the problems, which enabled the uniform culture in the whole substrate and high yield of many enzymes. In this paper, further characterization of SSF using the NAB was carried out to obtain other advantages. The NAB culture under the fixed environmental condition exhibited a rapid increase in enzyme production at earlier phase during the culture compared with conventional SSF. Total mycelial growth also exhibited the same trend as enzyme production. Thus, the increase in the rate of the enzyme production was thought to mainly be attributed to that of the growth. To support it, it was suggested that the NAB culture resulted in most optimal water activity for the growth just at the log phase. In addition, the NAB culture was able to achieve high reproducibility of enzyme production, derived from uniform condition of the substrate during the culture. The results indicate that the NAB culture has many benefits for SSF. Copyright © 2013 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  3. Microbiological study of lactic acid fermentation of Caper berries by molecular and culture-dependent methods.

    Science.gov (United States)

    Pérez Pulido, Rubén; Ben Omar, Nabil; Abriouel, Hikmate; Lucas López, Rosario; Martínez Cañamero, Magdalena; Gálvez, Antonio

    2005-12-01

    Fermentation of capers (the fruits of Capparis sp.) was studied by molecular and culture-independent methods. A lactic acid fermentation occurred following immersion of caper berries in water, resulting in fast acidification and development of the organoleptic properties typical of this fermented food. A collection of 133 isolates obtained at different times of fermentation was reduced to 75 after randomly amplified polymorphic DNA (RAPD)-PCR analysis. Isolates were identified by PCR or 16S rRNA gene sequencing as Lactobacillus plantarum (37 isolates), Lactobacillus paraplantarum (1 isolate), Lactobacillus pentosus (5 isolates), Lactobacillus brevis (9 isolates), Lactobacillus fermentum (6 isolates), Pediococcus pentosaceus (14 isolates), Pediococcus acidilactici (1 isolate), and Enterococcus faecium (2 isolates). Cluster analysis of RAPD-PCR patterns revealed a high degree of diversity among lactobacilli (with four major groups and five subgroups), while pediococci clustered in two closely related groups. A culture-independent analysis of fermentation samples by temporal temperature gradient electrophoresis (TTGE) also indicated that L. plantarum is the predominant species in this fermentation, in agreement with culture-dependent results. The distribution of L. brevis and L. fermentum in samples was also determined by TTGE, but identification of Pediococcus at the species level was not possible. TTGE also allowed a more precise estimation of the distribution of E. faecium, and the detection of Enterococcus casseliflavus (which was not revealed by the culture-dependent analysis). Results from this study indicate that complementary data from molecular and culture-dependent analysis provide a more accurate determination of the microbial community dynamics during caper fermentation.

  4. Rapid Quantification of Major Volatile Metabolites in Fermented Food and Beverages Using Gas Chromatography-Mass Spectrometry

    Directory of Open Access Journals (Sweden)

    Farhana R. Pinu

    2017-07-01

    Full Text Available Here we present a method for the accurate quantification of major volatile metabolites found in different food and beverages, including ethanol, acetic acid and other aroma compounds, using gas chromatography coupled to mass spectrometry (GC-MS. The method is combined with a simple sample preparation procedure using sodium chloride and anhydrous ethyl acetate. The GC-MS analysis was accomplished within 4.75 min, and over 80 features were detected, of which 40 were positively identified using an in-house and a commercialmass spectrometry (MS library. We determined different analytical parameters of these metabolites including the limit of detection (LOD, limit of quantitation (LOQ and range of quantification. In order to validate the method, we also determined detailed analytical characteristics of five major fermentation end products including ethanol, acetic acid, isoamyl alcohol, ethyl-L-lactate and, acetoin. The method showed very low technical variability for the measurements of these metabolites in different matrices (<3% with an excellent accuracy (100% ± 5%, recovery (100% ± 10%, reproducibility and repeatability [Coefficient of variation (CV 1–10%]. To demonstrate the applicability of the method, we analysed different fermented products including balsamic vinegars, sourdough, distilled (whisky and non-distilled beverages (wine and beer.

  5. Rapid Quantification of Major Volatile Metabolites in Fermented Food and Beverages Using Gas Chromatography-Mass Spectrometry.

    Science.gov (United States)

    Pinu, Farhana R; Villas-Boas, Silas G

    2017-07-26

    Here we present a method for the accurate quantification of major volatile metabolites found in different food and beverages, including ethanol, acetic acid and other aroma compounds, using gas chromatography coupled to mass spectrometry (GC-MS). The method is combined with a simple sample preparation procedure using sodium chloride and anhydrous ethyl acetate. The GC-MS analysis was accomplished within 4.75 min, and over 80 features were detected, of which 40 were positively identified using an in-house and a commercialmass spectrometry (MS) library. We determined different analytical parameters of these metabolites including the limit of detection (LOD), limit of quantitation (LOQ) and range of quantification. In order to validate the method, we also determined detailed analytical characteristics of five major fermentation end products including ethanol, acetic acid, isoamyl alcohol, ethyl-L-lactate and, acetoin. The method showed very low technical variability for the measurements of these metabolites in different matrices (<3%) with an excellent accuracy (100% ± 5%), recovery (100% ± 10%), reproducibility and repeatability [Coefficient of variation (CV) 1-10%)]. To demonstrate the applicability of the method, we analysed different fermented products including balsamic vinegars, sourdough, distilled (whisky) and non-distilled beverages (wine and beer).

  6. Rapid method for detection of salmonella in meat

    DEFF Research Database (Denmark)

    2016-01-01

    The present invention relates to a rapid method for the detection of Salmonella in meat as well as to a kit for performing said method. The method provides a time-to-result of less than 8 hours.......The present invention relates to a rapid method for the detection of Salmonella in meat as well as to a kit for performing said method. The method provides a time-to-result of less than 8 hours....

  7. Methods and compositions for rapid thermal cycling

    Science.gov (United States)

    Beer, Neil Reginald; Benett, William J.; Frank, James M.; Deotte, Joshua R.; Spadaccini, Christopher

    2015-10-27

    The rapid thermal cycling of a material is targeted. A microfluidic heat exchanger with an internal porous medium is coupled to tanks containing cold fluid and hot fluid. Fluid flows alternately from the cold tank and the hot tank into the porous medium, cooling and heating samples contained in the microfluidic heat exchanger's sample wells. A valve may be coupled to the tanks and a pump, and switching the position of the valve may switch the source and direction of fluid flowing through the porous medium. A controller may control the switching of valve positions based on the temperature of the samples and determined temperature thresholds. A sample tray for containing samples to be thermally cycled may be used in conjunction with the thermal cycling system. A surface or internal electrical heater may aid in heating the samples, or may replace the necessity for the hot tank.

  8. BioLab: Using Yeast Fermentation as a Model for the Scientific Method.

    Science.gov (United States)

    Pigage, Helen K.; Neilson, Milton C.; Greeder, Michele M.

    This document presents a science experiment demonstrating the scientific method. The experiment consists of testing the fermentation capabilities of yeasts under different circumstances. The experiment is supported with computer software called BioLab which demonstrates yeast's response to different environments. (YDS)

  9. Lactic Acid Fermentation, Urea and Lime Addition : Promising Faecal Sludge Sanitizing Methods for Emergency Sanitation

    NARCIS (Netherlands)

    Anderson, C.; Malambo, D.H.; Gonzalez Perez, M.E.; Nobela, H.N.; De Pooter, L.; Spit, J.; Hooijmans, C.M.; Van de Vossenberg, J.; Greya, W.; Thole, B.; Van Lier, J.B.; Brdjanovic, D.

    2015-01-01

    In this research, three faecal sludge sanitizing methods—lactic acid fermentation, urea treatment and lime treatment—were studied for application in emergency situations. These methods were investigated by undertaking small scale field trials with pit latrine sludge in Blantyre, Malawi. Hydrated

  10. Lactic Acid Fermentation, Urea and Lime Addition: Promising Faecal Sludge Sanitizing Methods for Emergency Sanitation.

    Science.gov (United States)

    Anderson, Catherine; Malambo, Dennis Hanjalika; Perez, Maria Eliette Gonzalez; Nobela, Happiness Ngwanamoseka; de Pooter, Lobke; Spit, Jan; Hooijmans, Christine Maria; de Vossenberg, Jack van; Greya, Wilson; Thole, Bernard; van Lier, Jules B; Brdjanovic, Damir

    2015-10-29

    In this research, three faecal sludge sanitizing methods-lactic acid fermentation, urea treatment and lime treatment-were studied for application in emergency situations. These methods were investigated by undertaking small scale field trials with pit latrine sludge in Blantyre, Malawi. Hydrated lime was able to reduce the E. coli count in the sludge to below the detectable limit within 1 h applying a pH > 11 (using a dosage from 7% to 17% w/w, depending faecal sludge alkalinity), urea treatment required about 4 days using 2.5% wet weight urea addition, and lactic acid fermentation needed approximately 1 week after being dosed with 10% wet weight molasses (2 g (glucose/fructose)/kg) and 10% wet weight pre-culture (99.8% pasteurised whole milk and 0.02% fermented milk drink containing Lactobacillus casei Shirota). Based on Malawian prices, the cost of sanitizing 1 m³ of faecal sludge was estimated to be €32 for lactic acid fermentation, €20 for urea treatment and €12 for hydrated lime treatment.

  11. Lactic Acid Fermentation, Urea and Lime Addition: Promising Faecal Sludge Sanitizing Methods for Emergency Sanitation

    Directory of Open Access Journals (Sweden)

    Catherine Anderson

    2015-10-01

    Full Text Available In this research, three faecal sludge sanitizing methods—lactic acid fermentation, urea treatment and lime treatment—were studied for application in emergency situations. These methods were investigated by undertaking small scale field trials with pit latrine sludge in Blantyre, Malawi. Hydrated lime was able to reduce the E. coli count in the sludge to below the detectable limit within 1 h applying a pH > 11 (using a dosage from 7% to 17% w/w, depending faecal sludge alkalinity, urea treatment required about 4 days using 2.5% wet weight urea addition, and lactic acid fermentation needed approximately 1 week after being dosed with 10% wet weight molasses (2 g (glucose/fructose/kg and 10% wet weight pre-culture (99.8% pasteurised whole milk and 0.02% fermented milk drink containing Lactobacillus casei Shirota. Based on Malawian prices, the cost of sanitizing 1 m3 of faecal sludge was estimated to be €32 for lactic acid fermentation, €20 for urea treatment and €12 for hydrated lime treatment.

  12. Coupling of Spinosad Fermentation and Separation Process via Two-Step Macroporous Resin Adsorption Method.

    Science.gov (United States)

    Zhao, Fanglong; Zhang, Chuanbo; Yin, Jing; Shen, Yueqi; Lu, Wenyu

    2015-08-01

    In this paper, a two-step resin adsorption technology was investigated for spinosad production and separation as follows: the first step resin addition into the fermentor at early cultivation period to decrease the timely product concentration in the broth; the second step of resin addition was used after fermentation to adsorb and extract the spinosad. Based on this, a two-step macroporous resin adsorption-membrane separation process for spinosad fermentation, separation, and purification was established. Spinosad concentration in 5-L fermentor increased by 14.45 % after adding 50 g/L macroporous at the beginning of fermentation. The established two-step macroporous resin adsorption-membrane separation process got the 95.43 % purity and 87 % yield for spinosad, which were both higher than that of the conventional crystallization of spinosad from aqueous phase that were 93.23 and 79.15 % separately. The two-step macroporous resin adsorption method has not only carried out the coupling of spinosad fermentation and separation but also increased spinosad productivity. In addition, the two-step macroporous resin adsorption-membrane separation process performs better in spinosad yield and purity.

  13. Enhancement of fermentative hydrogen production from green algal biomass of Thermotoga neapolitana by various pretreatment methods

    Energy Technology Data Exchange (ETDEWEB)

    Nguyen, Tam-Anh D.; Kim, Kyoung-Rok; Nguyen, Minh-Thu; Sim, Sang Jun [Department of Chemical Engineering, Sungkyunkwan University, Suwon 440-746 (Korea, Republic of); Kim, Mi Sun [Bioenergy Research Center, Korea Institute of Energy Research, Daejeon 305-343 (Korea, Republic of); Kim, Donhue [Department of Biochemical Engineering, Dongyang Mirae College, Seoul 152-714 (Korea, Republic of)

    2010-12-15

    Biomass of the green algae has been recently an attractive feedstock source for bio-fuel production because the algal carbohydrates can be derived from atmospheric CO{sub 2} and their harvesting methods are simple. We utilized the accumulated starch in the green alga Chlamydomonas reinhardtii as the sole substrate for fermentative hydrogen (H{sub 2}) production by the hyperthermophilic eubacterium Thermotoga neapolitana. Because of possessing amylase activity, the bacterium could directly ferment H{sub 2} from algal starch with H{sub 2} yield of 1.8-2.2 mol H{sub 2}/mol glucose and the total accumulated H{sub 2} level from 43 to 49% (v/v) of the gas headspace in the closed culture bottle depending on various algal cell-wall disruption methods concluding sonication or methanol exposure. Attempting to enhance the H{sub 2} production, two pretreatment methods using the heat-HCl treatment and enzymatic hydrolysis were applied on algal biomass before using it as substrate for H{sub 2} fermentation. Cultivation with starch pretreated by 1.5% HCl at 121 C for 20 min showed the total accumulative H{sub 2} yield of 58% (v/v). In other approach, enzymatic digestion of starch by thermostable {alpha}-amylase (Termamyl) applied in the SHF process significantly enhanced the H{sub 2} productivity of the bacterium to 64% (v/v) of total accumulated H{sub 2} level and a H{sub 2} yield of 2.5 mol H{sub 2}/mol glucose. Our results demonstrated that direct H{sub 2} fermentation from algal biomass is more desirably potential because one bacterial cultivation step was required that meets the cost-savings, environmental friendly and simplicity of H{sub 2} production. (author)

  14. RAPID METHOD FOR DETERMINATION OF RADIOSTRONTIUM IN EMERGENCY MILK SAMPLES

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, S.; Culligan, B.

    2008-07-17

    A new rapid separation method for radiostrontium in emergency milk samples was developed at the Savannah River Site (SRS) Environmental Bioassay Laboratory (Aiken, SC, USA) that will allow rapid separation and measurement of Sr-90 within 8 hours. The new method uses calcium phosphate precipitation, nitric acid dissolution of the precipitate to coagulate residual fat/proteins and a rapid strontium separation using Sr Resin (Eichrom Technologies, Darien, IL, USA) with vacuum-assisted flow rates. The method is much faster than previous method that use calcination or cation exchange pretreatment, has excellent chemical recovery, and effectively removes beta interferences. When a 100 ml sample aliquot is used, the method has a detection limit of 0.5 Bq/L, well below generic emergency action levels.

  15. Methods to optimize myxobacterial fermentations using off-gas analysis

    Directory of Open Access Journals (Sweden)

    Hüttel Stephan

    2012-05-01

    Full Text Available Abstract Background The influence of carbon dioxide and oxygen on microbial secondary metabolite producers and the maintenance of these two parameters at optimal levels have been studied extensively. Nevertheless, most studies have focussed on their influence on specific product formation and condition optimization of established processes. Considerably less attention has been paid to the influence of reduced or elevated carbon dioxide and oxygen levels on the overall metabolite profiles of the investigated organisms. The synergistic action of both gases has garnered even less attention. Results We show that the composition of the gas phase is highly important for the production of different metabolites and present a simple approach that enables the maintenance of defined concentrations of both O2 and CO2 during bioprocesses over broad concentration ranges with a minimal instrumental setup by using endogenously produced CO2. The metabolite profiles of a myxobacterium belonging to the genus Chondromyces grown under various concentrations of CO2 and O2 showed considerable differences. Production of two unknown, highly cytotoxic compounds and one antimicrobial substance was found to increase depending on the gas composition. In addition, the observation of CO2 and O2 in the exhaust gas allowed optimization and control of production processes. Conclusions Myxobacteria are becoming increasingly important due to their potential for bioactive secondary metabolite production. Our studies show that the influence of different gas partial pressures should not be underestimated during screening processes for novel compounds and that our described method provides a simple tool to investigate this question.

  16. Rapid analysis of formic acid, acetic acid, and furfural in pretreated wheat straw hydrolysates and ethanol in a bioethanol fermentation using atmospheric pressure chemical ionisation mass spectrometry

    Science.gov (United States)

    2011-01-01

    Atmospheric pressure chemical ionisation mass spectrometry (APCI-MS) offers advantages as a rapid analytical technique for the quantification of three biomass degradation products (acetic acid, formic acid and furfural) within pretreated wheat straw hydrolysates and the analysis of ethanol during fermentation. The data we obtained using APCI-MS correlated significantly with high-performance liquid chromatography analysis whilst offering the analyst minimal sample preparation and faster sample throughput. PMID:21896164

  17. Response of microbial community of organic-matter-impoverished arable soil to long-term application of soil conditioner derived from dynamic rapid fermentation of food waste.

    Science.gov (United States)

    Hou, Jiaqi; Li, Mingxiao; Mao, Xuhui; Hao, Yan; Ding, Jie; Liu, Dongming; Xi, Beidou; Liu, Hongliang

    2017-01-01

    Rapid fermentation of food waste can be used to prepare soil conditioner. This process consumes less time and is more cost-effective than traditional preparation technology. However, the succession of the soil microbial community structure after long-term application of rapid fermentation-derived soil conditioners remains unclear. Herein, dynamic rapid fermentation (DRF) of food waste was performed to develop a soil conditioner and the successions and diversity of bacterial communities in an organic-matter-impoverished arable soil after six years of application of DRF-derived soil conditioner were investigated. Results showed that the treatment increased soil organic matter (SOM) accumulation and strawberry yield by 5.3 g/kg and 555.91 kg/ha, respectively. Proteobacteria, Actinobacteria, Acidobacteria, and Firmicutes became the dominant phyla, occupying 65.95%-77.52% of the bacterial sequences. Principal component analysis (PCA) results showed that the soil bacterial communities were largely influenced by the treatment. Redundancy analysis (RDA) results showed that the relative abundances of Gemmatimonadetes, Chloroflexi, Verrucomicrobia, Nitrospirae, and Firmicutes were significantly correlated with soil TC, TN, TP, NH4+-N, NO3--N, OM, and moisture. These communities were all distributed in the soil samples collected in the sixth year of application. Long-term treatment did not enhance the diversity of bacterial species but significantly altered the distribution of major functional bacterial communities in the soils. Application of DRF-derived soil conditioner could improve the soil quality and optimize the microbial community, ultimately enhancing fruit yields.

  18. A universal, rapid, and inexpensive method for genomic DNA ...

    Indian Academy of Sciences (India)

    MOHAMMED BAQUR SAHIB A. AL-SHUHAIB

    Abstract. There is no 'one' procedure for extracting DNA from the whole blood of both mammals and birds, since each species has a unique property that require different methods to release its own DNA. Therefore, to obtain genomic DNA, a universal, rapid, and noncostly method was developed. A very simple biological ...

  19. Rapid, cost-effective liquid chromatograghic method for the ...

    African Journals Online (AJOL)

    GRACE

    2006-07-03

    Jul 3, 2006 ... 1Department of Medicinal Chemistry and Quality Control, National Institute for Pharmaceutical Research and Development, Abuja,. Nigeria. ... A rapid and cost effective method for the analysis of metronidazole in biological samples was ... effective HPLC method of assaying metronidazole both in.

  20. A universal, rapid, and inexpensive method for genomic DNA ...

    Indian Academy of Sciences (India)

    ... of both mammals and birds, since each species has a unique property that require different methods to release its own DNA. Therefore, to obtain genomic DNA, a universal, rapid, and noncostly method was developed. A very simple biological basis is followed in this procedure, in which, when the bloodis placed in water, ...

  1. Methods for Rapid Screening in Woody Plant Herbicide Development

    Directory of Open Access Journals (Sweden)

    William Stanley

    2014-07-01

    Full Text Available Methods for woody plant herbicide screening were assayed with the goal of reducing resources and time required to conduct preliminary screenings for new products. Rapid screening methods tested included greenhouse seedling screening, germinal screening, and seed screening. Triclopyr and eight experimental herbicides from Dow AgroSciences (DAS 313, 402, 534, 548, 602, 729, 779, and 896 were tested on black locust, loblolly pine, red maple, sweetgum, and water oak. Screening results detected differences in herbicide and species in all experiments in much less time (days to weeks than traditional field screenings and consumed significantly less resources (<500 mg acid equivalent per herbicide per screening. Using regression analysis, various rapid screening methods were linked into a system capable of rapidly and inexpensively assessing herbicide efficacy and spectrum of activity. Implementation of such a system could streamline early-stage herbicide development leading to field trials, potentially freeing resources for use in development of beneficial new herbicide products.

  2. Methods and systems for rapid prototyping of high density circuits

    Science.gov (United States)

    Palmer, Jeremy A [Albuquerque, NM; Davis, Donald W [Albuquerque, NM; Chavez, Bart D [Albuquerque, NM; Gallegos, Phillip L [Albuquerque, NM; Wicker, Ryan B [El Paso, TX; Medina, Francisco R [El Paso, TX

    2008-09-02

    A preferred embodiment provides, for example, a system and method of integrating fluid media dispensing technology such as direct-write (DW) technologies with rapid prototyping (RP) technologies such as stereolithography (SL) to provide increased micro-fabrication and micro-stereolithography. A preferred embodiment of the present invention also provides, for example, a system and method for Rapid Prototyping High Density Circuit (RPHDC) manufacturing of solderless connectors and pilot devices with terminal geometries that are compatible with DW mechanisms and reduce contact resistance where the electrical system is encapsulated within structural members and manual electrical connections are eliminated in favor of automated DW traces. A preferred embodiment further provides, for example, a method of rapid prototyping comprising: fabricating a part layer using stereolithography and depositing thermally curable media onto the part layer using a fluid dispensing apparatus.

  3. A rapid ultrasound particle agglutination method for HIV antibody detection: Comparison with conventional rapid HIV tests.

    Science.gov (United States)

    Bystryak, Simon; Ossina, Natalya

    2017-11-01

    We present the results of the feasibility and preliminary studies on analytical performance of a rapid test for detection of human immunodeficiency virus (HIV) antibodies in human serum or plasma that is an important advance in detecting HIV infection. Current methods for rapid testing of antibodies against HIV are qualitative and exhibit poor sensitivity (limit of detection). In this paper, we describe an ultrasound particle agglutination (UPA) method that leads to a significant increase of the sensitivity of conventional latex agglutination tests for HIV antibody detection in human serum or plasma. The UPA method is based on the use of: 1) a dual mode ultrasound, wherein a first single-frequency mode is used to accelerate the latex agglutination process, and then a second swept-frequency mode of sonication is used to disintegrate non-specifically bound aggregates; and 2) a numerical assessment of results of the agglutination process. The numerical assessment is carried out by optical detection and analysis of moving patterns in the resonator cell during the swept-frequency mode. The single-step UPA method is rapid and more sensitive than the three commercial rapid HIV test kits analyzed in the study: analytical sensitivity of the new UPA method was found to be 510-, 115-, and 80-fold higher than that for Capillus™, Multispot™ and Uni-Gold™ Recombigen HIV antibody rapid test kits, respectively. The newly developed UPA method opens up additional possibilities for detection of a number of clinically significant markers in point-of-care settings. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Alternative non-chromatographic method for alcohols determination in Clostridium acetobutylicum fermentations.

    Science.gov (United States)

    Noriega-Medrano, Laura J; Vega-Estrada, Jesús; Ortega-López, Jaime; Ruiz-Medrano, Roberto; Cristiani-Urbina, Eliseo; Montes-Horcasitas, Maria Del Carmen

    2016-07-01

    An economic, simple, quantitative, and non-chromatographic method for the determination of alcohols using microdiffusion principle has been adapted and validated for acetone-butanol-ethanol (ABE) fermentation samples. This method, based on alcohols oxidation using potassium dichromate in acid medium, and detection by spectrophotometry, was evaluated varying, both, temperature (35°C, 45°C, and 55°C) and reaction time (0 to 125min). With a sample analysis time of 90min at 45°C, a limit of detection (LOD), and a limit of quantification (LOQ) of 0.10, and 0.40g/L, respectively. The proposed method has been successfully applied to determine butanol and ethanol concentrations in ABE fermentation samples with the advantage that multiple samples can be analyzed simultaneously. The measurements obtained with the proposed method were in good agreement with those obtained with the Gas Chromatography Method (GCM). This proposed method is useful for routine analysis of alcohols and screening samples in laboratories and industries. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. Elucidating the Beneficial Effect of Corncob Acid Hydrolysate Environment on Lipid Fermentation of Trichosporon dermatis by Method of Cell Biology.

    Science.gov (United States)

    Huang, Chao; Wang, Can; Xiong, Lian; Chen, Xue-Fang; Lin, Xiao-Qing; Qi, Gao-Xiang; Shi, Si-Lan; Wang, Bo; Chen, Xin-De

    2016-04-01

    In present study, the beneficial effect of corncob acid hydrolysate environment on lipid fermentation of Trichosporon dermatis was elucidated by method of cell biology (mainly using flow cytometry and microscope) for the first time. Propidium iodide (PI) and rhodamine 123 (Rh123) staining showed that corncob acid hydrolysate environment was favorable for the cell membrane integrity and mitochondrial membrane potential of T. dermatis and thus made its lipid fermentation more efficient. Nile red (NR) staining showed that corncob acid hydrolysate environment made the lipid accumulation of T. dermatis slower, but this influence was not serious. Moreover, the cell morphology of T. dermatis elongated in the corncob acid hydrolysate, but the cell morphology changed as elliptical-like during fermentation. Overall, this work offers one simple and effective method to evaluate the influence of lignocellulosic hydrolysates environment on lipid fermentation.

  6. Establishment of evaluation method to determine effects of veterinary medicinal products on manure fermentation using small-scale composting apparatus.

    Science.gov (United States)

    Eguchi, Kaoru; Otawa, Kenichi; Ohishi, Ryu; Nagase, Hiroyasu; Ogata, Tomoko; Nagai, Hidetaka; Murata, Nanae; Ishikawa, Hitoshi; Hirata, Kazumasa; Nakai, Yutaka

    2012-09-01

    To evaluate on a laboratory scale the influence of veterinary medicinal products (VMPs) excreted into feces on manure fermentation, we have developed an evaluation method that uses a small-scale composting apparatus. Each run is of approximately 3 kg scale and the operation can be conducted in an environmentally controlled laboratory. The main evaluation parameter is calorific value generated by aerobic fermentation. At the sulfadimethoxine (SDM) trial, the volume of CO(2) generated during fermentation and the disappearance of the inhibitory effect of immature manure on sprouting (using Komatsuna (Brassica rapa var. perviridis)) were measured. In addition, DNA of 16S rRNA was extracted from a manure sample and subjected to denaturing gradient gel electrophoresis (DGGE). The results suggest that the presence of such VMPs in feces affected the microbial community in manure fermentation, and indicate that the evaluation method may be used as a standard method to evaluate the effect of VMPs on the microbial community. Using the method, we obtained data of the influence of five VMPs approved for stockbreeding in Japan on swine manure fermentation. Erythromycin (EM) affected the calorific value even at a relatively low concentration (105 mg/3 kg manure). In contrast, oxytetracycline hydrochloride (OTC), norfloxacin (NFLX), and tylosin tartrate (TS) had no effect at that concentration. These VMPs also affected the increase of fermentation temperature when added at high concentrations. Copyright © 2012 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  7. Rapid and Quantitative Determination of S-Adenosyl-L-Methionine in the Fermentation Process by Surface-Enhanced Raman Scattering

    Directory of Open Access Journals (Sweden)

    Hairui Ren

    2016-01-01

    Full Text Available Concentrations of S-Adenosyl-L-Methionine (SAM in aqueous solution and fermentation liquids were quantitatively determined by surface-enhanced Raman scattering (SERS and verified by high-pressure liquid chromatography (HPLC. The Ag nanoparticle/silicon nanowire array substrate was fabricated and employed as an active SERS substrate to indirectly measure the SAM concentration. The linear relationship between the integrated intensity of peak centered at ~2920 cm−1 in SERS spectra and the SAM concentration was established, and the limit of detections of SAM concentrations was analyzed to be ~0.1 g/L. The concentration of SAM in real solution could be predicted by the linear relationship and verified by the HPLC detection method. The relative deviations (δ of the predicted SAM concentration are less than 13% and the correlation coefficient is 0.9998. Rolling-Circle Filter was utilized to subtract fluorescence background and the optimal results were obtained when the radius of the analyzing circle is 650 cm−1.

  8. RAPID SEPARATION METHOD FOR ACTINIDES IN EMERGENCY SOIL SAMPLES

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, S.; Culligan, B.; Noyes, G.

    2009-11-09

    A new rapid method for the determination of actinides in soil and sediment samples has been developed at the Savannah River Site Environmental Lab (Aiken, SC, USA) that can be used for samples up to 2 grams in emergency response situations. The actinides in soil method utilizes a rapid sodium hydroxide fusion method, a lanthanum fluoride soil matrix removal step, and a streamlined column separation process with stacked TEVA, TRU and DGA Resin cartridges. Lanthanum was separated rapidly and effectively from Am and Cm on DGA Resin. Vacuum box technology and rapid flow rates are used to reduce analytical time. Alpha sources are prepared using cerium fluoride microprecipitation for counting by alpha spectrometry. The method showed high chemical recoveries and effective removal of interferences. This new procedure was applied to emergency soil samples received in the NRIP Emergency Response exercise administered by the National Institute for Standards and Technology (NIST) in April, 2009. The actinides in soil results were reported within 4-5 hours with excellent quality.

  9. Lactic Acid Fermentation, Urea and Lime Addition: Promising Faecal Sludge Sanitizing Methods for Emergency Sanitation

    OpenAIRE

    Anderson, Catherine; Malambo, Dennis Hanjalika; Gonzalez Perez, Maria Eliette; Nobela, Happiness Ngwanamoseka; de Pooter, Lobke; Spit, Jan; Hooijmans, Christine Maria; van de Vossenberg, Jack; Greya, Wilson; Thole, Bernard; van Lier, Jules B.; Brdjanovic, Damir

    2015-01-01

    In this research, three faecal sludge sanitizing methods—lactic acid fermentation, urea treatment and lime treatment—were studied for application in emergency situations. These methods were investigated by undertaking small scale field trials with pit latrine sludge in Blantyre, Malawi. Hydrated lime was able to reduce the E. coli count in the sludge to below the detectable limit within 1 h applying a pH > 11 (using a dosage from 7% to 17% w/w, depending faecal sludge alkalinity), urea tre...

  10. Determination of wine microbiota using classical method, polymerase chain method and Step One Real-Time PCR during fermentation process.

    Science.gov (United States)

    Kačániová, Miroslava; Hleba, Lukáš; Pochop, Jaroslav; Kádasi-Horáková, Miriam; Fikselová, Martina; Rovná, Katarína

    2012-01-01

    The aim of our study was the identification of grape, must and wine microbiota during the fermentation process using a classical microbiological method and Real-Time PCR. The changes in different groups of microorganisms were monitored in total counts of bacteria, lactobacilli and yeasts. Microbiological parameters were observed during the current collection and processing of grapes in 2009. Samples were taken during the fermentation process in wine enterprises and a private vineyard. During this period 30 samples of wine among Müller Thurgau, Cabernet Sauvignon, Chardonnay, Tramin and Red Bio-wine were examined. Samples were collected from stages of grape-must unfiltered, grape-must filtered, the beginning of fermentation, fermentation, late fermentation and young wine. The highest total counts of bacteria ranged from 0.00 to 176 ± 15 CFU.mL(-1) in the wine of Müller Thurgau, the highest number of yeast ranged from 0.00 to 150 ± 9 CFU.mL(-1) in the wine of Müller Thurgau and the number of Lactobacillus spp. ranged from 0.00 to 92 ± 5 CFU.mL(-1) in the sample of Cabernet Sauvignon wine. The presence and sensitivity of Gram-positive and Gram-negative bacterial species Enterococcus faecium, Lactobacillus acidophilus, Lactobacillus crispatus and Lactobacillus salivarius were detected using Real-Time PCR (RTQ PCR). Susceptibility of Enterococcus faecium varied in different isolates from 1 to 10(6) CFU.mL(-1), the sensitivity of the species Lactobacillus acidophilus in different isolates of the wine samples ranged from 1 to 10(5) CFU.mL(-1). We also monitored representation of species Lactobacillus crispatus, which were captured by RTQ PCR sensitivity and ranged from 1 to 10(5) CFU.mL(-1). Identification of the species Lactobacillus salivarius in each of isolates by RTQ PCR method showed the presence of these bacteria in the range of 1 to 10(4) CFU.mL(-1). Copyright © Taylor & Francis Group, LLC

  11. Accuracy, precision and robustness of different methods to obtain samples from silages in fermentation studies

    Directory of Open Access Journals (Sweden)

    Rodrigo da Costa Gomes

    2012-06-01

    Full Text Available The objective of this study was to evaluate accuracy, precision and robustness of two methods to obtain silage samples, in comparison with extraction of liquor by manual screw-press. Wet brewery residue alone or combined with soybean hulls and citrus pulp were ensiled in laboratory silos. Liquor was extracted by a manual screw-press and a 2-mL aliquot was fixed with 0.4 mL formic acid. Two 10-g silage samples from each silo were diluted in 20 mL deionized water or 17% formic acid solution (alternative methods. Aliquots obtained by the three methods were used to determine the silage contents of fermentation end-products. The accuracy of the alternative methods was evaluated by comparing mean bias of estimates obtained by manual screw-press and by alternative methods, whereas precision was assessed by the root mean square prediction error and the residual error. Robustness was determined by studying the interaction between bias and chemical components, pH, in vitro dry matter digestibility (IVDMD and buffer capacity. The 17% formic acid method was more accurate for estimating acetic, butyric and lactic acids, although it resulted in low overestimates of propionic acid and underestimates of ethanol. The deionized water method overestimated acetic and propionic acids and slightly underestimated ethanol. The 17% formic acid method was more precise than deionized water for estimating all organic acids and ethanol. The robustness of each method with respect to variation in the silage chemical composition, IVDMD and pH is dependent on the fermentation end-product at evaluation. The robustness of the alternative methods seems to be critical at the determination of lactic acid and ethanol contents.

  12. Rapid method to estimate temperature changes in electronics elements

    Directory of Open Access Journals (Sweden)

    Oborskii G. A., Savel’eva O. S., Shikhireva Yu. V.

    2014-06-01

    Full Text Available Thermal behavior of electronic equipment is the determining factor for performing rapid assessment of the effectiveness of design and operation of the equipment. The assessment method proposed in this article consists in fixation of an infrared video stream from the surface of the device and converting it into a visible flow by means of a thermal imager, splitting it into component colors and their further processing using parabolic transformation. The result of the transformation is the number used as a rapid criterion for estimation of distribution stability of heat in the equipment.

  13. Rapid methods for detection of bacterial resistance to antibiotics.

    Science.gov (United States)

    March-Rosselló, Gabriel Alberto

    2017-03-01

    The most widely used antibiotic susceptibility testing methods in Clinical Microbiology are based on the phenotypic detection of antibiotic resistance by measuring bacterial growth in the presence of the antibiotic being tested. These conventional methods take typically 24hours to obtain results. Here we review the main techniques for rapid determination of antibiotic susceptibility. Data obtained with different methods such as molecular techniques, microarrays, commercial methods used in work routine, immunochromatographic methods, colorimetric methods, image methods, nephelometry, MALDI-TOF mass spectrometry, flow cytometry, chemiluminescence and bioluminescence, microfluids and methods based on cell disruption are analysed in detail. Copyright © 2016 Elsevier España, S.L.U. and Sociedad Española de Enfermedades Infecciosas y Microbiología Clínica. All rights reserved.

  14. Evaluation of a Rapid Method of Determination of Plasma Fibrinogen

    Science.gov (United States)

    Thomson, G. W.; McSherry, B. J.; Valli, V. E. O.

    1974-01-01

    An evaluation was made of a rapid semiautomated method of determining fibrinogen levels in bovine plasma. This method, the fibrometer method of Morse, Panek and Menga (8), is based on the principle that when thrombin is added to suitably diluted plasma the time of clotting is linearly related to the fibrinogen concentration. A standard curve prepared using bovine plasma had an r value of .9987 and analysis of variance showed there was no significant deviation from regression. A comparison of the fibrometer method and the biuret method of Ware, Guest and Seegers done on 158 bovine plasma samples showed good correlation between the two methods. It was concluded that the fibrometer method does measure bovine fibrinogen and has considerable merit for use in clinical diseases of cattle. PMID:4277474

  15. Rapid methods for determination of fluoxetine in pharmaceutical formulations.

    Science.gov (United States)

    Mandrioli, R; Pucci, V; Visini, D; Varani, G; Raggi, M A

    2002-08-01

    Two different analytical methods for the quality control of fluoxetine in commercial formulations have been developed and compared: a spectrofluorimetric method and a capillary zone electrophoretic (CZE) method. The fluorescence emission values were measured at lambda=293 nm when exciting at lambda=230 nm. The CZE method used an uncoated fused-silica capillary and pH 2.5 phosphate buffer as the background electrolyte. The extraction of fluoxetine from the capsules consisted of a simple one-step dissolution with methanol/water, filtration and dilution. Both methods gave satisfactory results in terms of precision; the best results were obtained for the electrophoretic method, with RSD% values always lower than 2.0%. The accuracy was assessed by means of recovery studies, which gave very good results, between 97.5 and 102.6%. Furthermore, both methods also have the advantage of being very rapid.

  16. Dietary Sugars Analysis: Quantification of Fructooligossacharides during Fermentation by HPLC-RI Method.

    Science.gov (United States)

    Correia, Daniela M; Dias, Luís G; Veloso, Ana C A; Dias, Teresa; Rocha, Isabel; Rodrigues, Lígia R; Peres, António M

    2014-01-01

    In this work, a simple chromatographic method is proposed and in-house validated for the quantification of total and individual fructooligossacharides (e.g., 1-kestose, nystose, and 1(F)-fructofuranosylnystose). It was shown that a high-performance liquid chromatography with refractive index detector could be used to monitor the dynamic of fructooligossacharides production via sucrose fermentation using Aspergillus aculeatus. This analytical technique may be easily implemented at laboratorial or industrial scale for fructooligossacharides mass-production monitoring allowing also controlling the main substrate (sucrose) and the secondary by-products (glucose and fructose). The proposed chromatographic method had a satisfactory intra- and inter-day variability (in general, with a relative standard deviation lower than 5%), high sensitivity for each sugar (usually, with a relative error lower than 5%), and low detection (lower than 0.06 ± 0.04 g/L) and quantification (lower than 0.2 ± 0.1 g/L) limits. The correct quantification of fructooligossacharides in fermentative media may allow a more precise nutritional formulation of new functional foods, since it is reported that different fructooligossacharides exhibit different biological activities and effects.

  17. The Cavitation With Plate Transducer And Non Cavitation With Knob Transducer By Manihot Utilissima Fermentation The Potential Hydrogen Ph Method

    Directory of Open Access Journals (Sweden)

    Syamsul Arifin

    2015-08-01

    Full Text Available Abstract Manihot M. utilissima fermentation is popular foods and drinks for Indonesia people but it fermented foods 24 hours per day will breed fungi and anaerobic bacteriae so it will make it into acidic foods and alcoholic beverages. Ultrasonic 48 kHz 5 Vpp 1 VDC with functional generator and of the two models of transducers will have two different phenomena on M. utilissima fermentation. Methods Model-1. Radiation ultrasonic transducer plate or Flat of piezoelectric speakers2 were applied with transducers M. utilissima dipped in a test tube. Model-2. Knob or small ball ultrasonic transducer 12 balls were applied with transducers of tin knob which was connected to the copper wire2 and piezoelectricspeakers were dipped into the media M. utilissima in a test tube. After ultrasonic radiation fluid liquid from two models of transducers measured total acid in M. utilissima fermentation liquid by paper indicators of potential Hydrogen pH. The conclusion of this study can predict different phenomena namely the transducer plate of the initial pH value-acid fermentation M. utilissima can change increases the pH-value end of the base which means that the transducer plate has a cavitation phenomenon and media M. utilissima lead to the delicious food but on transducer knob that the initial pH value-acid fermentation M. utilissima will decrease more acid value so that have no phenomenon of cavitation and the media will lead M. utilissima to be alcoholic foods.

  18. A simple and rapid method for determining transgenic cotton plants.

    Science.gov (United States)

    Zhang, Baohong; Wang, Hongmei; Liu, Fang; Wang, Qinglian

    2013-01-01

    Determining transgenic events is a critical step for obtaining transgenic plants as well as the later stage of application. Traditional methods, such as Northern blotting and qRT-PCR, for determining transgenic events either require radioactively labeled substrates, expensive instruments, or long-time commitments, which result in lab and time-consuming as well as expensive costs. These methods also require destroying the transgenic events. In this chapter, we present a simple and rapid method for determining transgenic cotton plants in both laboratory and field conditions. This method is based on the sensitivity of transgenic and non-transgenic plants to a specific chemical, such as antibiotics or herbicides. This method will facilitate the screening of transgenic events, save time, reduce cost, and speed up the application of transgenic technology on cotton breeding and production. More important, this is a nondestructive bioassay method; the transgenic plants can be transferred into greenhouse or field for the later study after the detection process.

  19. Rapid and selective method for quantitation of metronidazole in pharmaceuticals.

    Science.gov (United States)

    Sanyal, A K

    1988-01-01

    A selective and highly sensitive assay for N-1-substituted nitroimidazoles has been modified and adapted for rapid estimation of metronidazole in pharmaceuticals. The color reaction is based on diazotization of sulfanilamide with the nitrite ions liberated by alkaline hydrolysis of metronidazole and subsequent coupling of the diazonium salt with N-1-(naphthyl)-ethylenediamine dihydrochloride. This method is applicable for the assay of benzoyl metronidazole in oral suspension. Officially recommended excipients and preservatives do not interfere.

  20. Preparing Silica Aerogel Monoliths via a Rapid Supercritical Extraction Method

    Science.gov (United States)

    Gorka, Caroline A.

    2014-01-01

    A procedure for the fabrication of monolithic silica aerogels in eight hours or less via a rapid supercritical extraction process is described. The procedure requires 15-20 min of preparation time, during which a liquid precursor mixture is prepared and poured into wells of a metal mold that is placed between the platens of a hydraulic hot press, followed by several hours of processing within the hot press. The precursor solution consists of a 1.0:12.0:3.6:3.5 x 10-3 molar ratio of tetramethylorthosilicate (TMOS):methanol:water:ammonia. In each well of the mold, a porous silica sol-gel matrix forms. As the temperature of the mold and its contents is increased, the pressure within the mold rises. After the temperature/pressure conditions surpass the supercritical point for the solvent within the pores of the matrix (in this case, a methanol/water mixture), the supercritical fluid is released, and monolithic aerogel remains within the wells of the mold. With the mold used in this procedure, cylindrical monoliths of 2.2 cm diameter and 1.9 cm height are produced. Aerogels formed by this rapid method have comparable properties (low bulk and skeletal density, high surface area, mesoporous morphology) to those prepared by other methods that involve either additional reaction steps or solvent extractions (lengthier processes that generate more chemical waste).The rapid supercritical extraction method can also be applied to the fabrication of aerogels based on other precursor recipes. PMID:24637334

  1. Rapid Enzymatic Method for Pectin Methyl Esters Determination

    Directory of Open Access Journals (Sweden)

    Lucyna Łękawska-Andrinopoulou

    2013-01-01

    Full Text Available Pectin is a natural polysaccharide used in food and pharma industries. Pectin degree of methylation is an important parameter having significant influence on pectin applications. A rapid, fully automated, kinetic flow method for determination of pectin methyl esters has been developed. The method is based on a lab-made analyzer using the reverse flow-injection/stopped flow principle. Methanol is released from pectin by pectin methylesterase in the first mixing coil. Enzyme working solution is injected further downstream and it is mixed with pectin/pectin methylesterase stream in the second mixing coil. Methanol is oxidized by alcohol oxidase releasing formaldehyde and hydrogen peroxide. This reaction is coupled to horse radish peroxidase catalyzed reaction, which gives the colored product 4-N-(p-benzoquinoneimine-antipyrine. Reaction rate is proportional to methanol concentration and it is followed using Ocean Optics USB 2000+ spectrophotometer. The analyzer is fully regulated by a lab written LabVIEW program. The detection limit was 1.47 mM with an analysis rate of 7 samples h−1. A paired t-test with results from manual method showed that the automated method results are equivalent to the manual method at the 95% confidence interval. The developed method is rapid and sustainable and it is the first application of flow analysis in pectin analysis.

  2. SIMS: a hybrid method for rapid conformational analysis.

    Directory of Open Access Journals (Sweden)

    Bryant Gipson

    Full Text Available Proteins are at the root of many biological functions, often performing complex tasks as the result of large changes in their structure. Describing the exact details of these conformational changes, however, remains a central challenge for computational biology due the enormous computational requirements of the problem. This has engendered the development of a rich variety of useful methods designed to answer specific questions at different levels of spatial, temporal, and energetic resolution. These methods fall largely into two classes: physically accurate, but computationally demanding methods and fast, approximate methods. We introduce here a new hybrid modeling tool, the Structured Intuitive Move Selector (sims, designed to bridge the divide between these two classes, while allowing the benefits of both to be seamlessly integrated into a single framework. This is achieved by applying a modern motion planning algorithm, borrowed from the field of robotics, in tandem with a well-established protein modeling library. sims can combine precise energy calculations with approximate or specialized conformational sampling routines to produce rapid, yet accurate, analysis of the large-scale conformational variability of protein systems. Several key advancements are shown, including the abstract use of generically defined moves (conformational sampling methods and an expansive probabilistic conformational exploration. We present three example problems that sims is applied to and demonstrate a rapid solution for each. These include the automatic determination of "active" residues for the hinge-based system Cyanovirin-N, exploring conformational changes involving long-range coordinated motion between non-sequential residues in Ribose-Binding Protein, and the rapid discovery of a transient conformational state of Maltose-Binding Protein, previously only determined by Molecular Dynamics. For all cases we provide energetic validations using well

  3. In vitro fermentation vessel type and method alter fiber digestibility estimates.

    Science.gov (United States)

    Hall, M B; Mertens, D R

    2008-01-01

    7 to 15% lower for treatment 1 than for the average of all other treatments. Slopes of the gas production per gram of substrate dry matter curves differed between treatments 3 and 5. In conclusion, measured NDFD was altered by fermentation treatment, with polyethylene tubes + gas-release valves giving the lowest values. Consequently, NDFD values may not be comparable across fermentation methods, but the effect will vary among feedstuffs. The combination of methods used for sealing, gassing, or agitating vessels may have a greater impact on NDFD than does vessel type.

  4. A novel method for rapid in vitro radiobioassay

    Science.gov (United States)

    Crawford, Evan Bogert

    Rapid and accurate analysis of internal human exposure to radionuclides is essential to the effective triage and treatment of citizens who have possibly been exposed to radioactive materials in the environment. The two most likely scenarios in which a large number of citizens would be exposed are the detonation of a radiation dispersal device (RDD, "dirty bomb") or the accidental release of an isotope from an industrial source such as a radioisotopic thermal generator (RTG). In the event of the release and dispersion of radioactive materials into the environment in a large city, the entire population of the city -- including all commuting workers and tourists -- would have to be rapidly tested, both to satisfy the psychological needs of the citizens who were exposed to the mental trauma of a possible radiation dose, and to satisfy the immediate medical needs of those who received the highest doses and greatest levels of internal contamination -- those who would best benefit from rapid, intensive medical care. In this research a prototype rapid screening method to screen urine samples for the presence of up to five isotopes, both individually and in a mixture, has been developed. The isotopes used to develop this method are Co-60, Sr-90, Cs-137, Pu-238, and Am-241. This method avoids time-intensive chemical separations via the preparation and counting of a single sample on multiple detectors, and analyzing the spectra for isotope-specific markers. A rapid liquid-liquid separation using an organic extractive scintillator can be used to help quantify the activity of the alpha-emitting isotopes. The method provides quantifiable results in less than five minutes for the activity of beta/gamma-emitting isotopes when present in the sample at the intervention level as defined by the Centers for Disease Control and Prevention (CDC), and quantifiable results for the activity levels of alpha-emitting isotopes present at their respective intervention levels in approximately 30

  5. Biodiversity and dynamics of meat fermentations: the contribution of molecular methods for a better comprehension of a complex ecosystem.

    Science.gov (United States)

    Cocolin, Luca; Dolci, Paola; Rantsiou, Kalliopi

    2011-11-01

    The ecology of fermented sausages is complex and includes different species and strains of bacteria, yeasts and molds. The developments in the field of molecular biology, allowed for new methods to become available, which could be applied to better understand dynamics and diversity of the microorganisms involved in the production of sausages. Methods, such as denaturing gradient gel electrophoresis (DGGE), employed as a culture-independent approach, allow to define the microbial dynamics during the fermentation and ripening. Such approach has highlighted that two main species of lactic acid bacteria, namely Lactobacillus sakei and Lb. curvatus, are involved in the transformation process and that they are accompanied by Staphylococcus xylosus, as representative of the coagulase-negative cocci. These findings were repeatedly confirmed in different regions of the world, mainly in the Mediterranean countries where dry fermented sausages have a long tradition and history. The application of molecular methods for the identification and characterization of isolated strains from fermentations highlighted a high degree of diversity within the species mentioned above, underlining the need to better follow strain dynamics during the transformation process. While there is an important number of papers dealing with bacterial ecology by using molecular methods, studies on mycobiota of fermented sausages are just a few. This review reports on how the application of molecular methods made possible a better comprehension of the sausage fermentations, opening up new fields of research that in the near future will allow to unravel the connection between sensory properties and co-presence of multiple strains of the same species. Copyright © 2011 Elsevier Ltd. All rights reserved.

  6. Culture condition improvement for whole-cell lipase production in submerged fermentation by Rhizopus chinensis using statistical method.

    Science.gov (United States)

    Teng, Yun; Xu, Yan

    2008-06-01

    Rhizopus chinensis CCTCC M201021 was a versatile strain capable of producing whole-cell lipase with synthetic activity in submerged fermentation. In order to improve the production of whole-cell lipase and study the culture conditions systematically, the combination of taguchi method and response surface methodology was performed. Taguchi method was used for the initial optimization, and eight factors viz., maltose, olive oil, peptone, K2HPO4, agitation, inoculum size, fermentation volume and pH were selected for this study. The whole-cell lipase activity yield was two times higher than the control experiment under initial optimal conditions, and four significant factors (inoculum, olive oil, fermentation volume and peptone) were selected to test the effect on the lipase production using response surface methodology. The optimal fermentation parameters for enhanced whole-cell lipase yield were found to be: inoculum 4.25 x 10(8) spores/L, olive oil 2.367% (w/v), fermentation volume 18 mL/250 mL flask, peptone 4.06% (w/v). Subsequent experimental trails confirmed the validity of the model. These optimal culture conditions in the shake flask led to a lipase yield of 13875 U/L, which 120% increased compare with the non-optimized conditions.

  7. Rapid assessment methods in eye care: An overview

    Directory of Open Access Journals (Sweden)

    Srinivas Marmamula

    2012-01-01

    Full Text Available Reliable information is required for the planning and management of eye care services. While classical research methods provide reliable estimates, they are prohibitively expensive and resource intensive. Rapid assessment (RA methods are indispensable tools in situations where data are needed quickly and where time- or cost-related factors prohibit the use of classical epidemiological surveys. These methods have been developed and field tested, and can be applied across almost the entire gamut of health care. The 1990s witnessed the emergence of RA methods in eye care for cataract, onchocerciasis, and trachoma and, more recently, the main causes of avoidable blindness and visual impairment. The important features of RA methods include the use of local resources, simplified sampling methodology, and a simple examination protocol/data collection method that can be performed by locally available personnel. The analysis is quick and easy to interpret. The entire process is inexpensive, so the survey may be repeated once every 5-10 years to assess the changing trends in disease burden. RA survey methods are typically linked with an intervention. This article provides an overview of the RA methods commonly used in eye care, and emphasizes the selection of appropriate methods based on the local need and context.

  8. A rapid DNA extraction method suitable for human papillomavirus detection.

    Science.gov (United States)

    Brestovac, Brian; Wong, Michelle E; Costantino, Paul S; Groth, David

    2014-04-01

    Infection with oncogenic human papillomavirus (HPV) genotypes is necessary for the development of cervical cancer. Testing for HPV DNA from liquid based cervical samples can be used as an adjunct to traditional cytological screening. In addition there are ongoing viral load, genotyping, and prevalence studies. Therefore, a sensitive DNA extraction method is needed to maximize the efficiency of HPV DNA detection. The XytXtract Tissue kit is a DNA extraction kit that is rapid and so could be useful for HPV testing, particularly in screening protocols. This study was undertaken to determine the suitability of this method for HPV detection. DNA extraction from HeLa and Caski cell lines containing HPV 18 and 16 respectively together with DNA from five liquid based cervical samples were used in a HPV PCR assay. DNA was also extracted using the QIAamp DNA mini kit (Qiagen, Hilden, Germany) as a comparison. DNA extracts were serially diluted and assayed. HPV DNA was successfully detected in cell lines and cervical samples using the XytXtract Tissue kit. In addition, the XytXtract method was found to be more sensitive than the QIAmp method as determined by a dilution series of the extracted DNA. While the XytXtract method is a closed, the QIAamp method uses a spin column with possible loss of DNA through DNA binding competition of the matrix, which could impact on the final extraction efficiency. The XytXtract is a cheap, rapid and efficient method for extracting HPV DNA from both cell lines and liquid based cervical samples. © 2014 Wiley Periodicals, Inc.

  9. A rapid PCR based method to distinguish between Enterococcus ...

    African Journals Online (AJOL)

    ... by using Efm1/Efm2, Efs1/Efs2 and Eh1/Eh2 primers, ten different genotypes were recognised. Enterococcus faecium was the dominant biotype followed by E. faecalis. The results suggest that wild bacterial populations should be preserved in order to protect the traditional lactic fermentation and for product innovation.

  10. Fermentation of an Aromatized Wine-Based Beverage with Sambucus nigra L. Syrup (after Champenoise Method

    Directory of Open Access Journals (Sweden)

    Teodora Emilia Coldea

    2015-11-01

    Full Text Available The sparkling wine based beverage with elderflower (Sambucus nigra L. syrup presented improved sensorial characteristics. White wine used was Fetească regală variety, obtained in Micro winery of University of Agricultural Sciences and Veterinary Medicine of Cluj-Napoca. Elderflower syrup was prepared without thermal treatment, but was pasteurised before its addition to wine. Elderflower have many health benefits, such as diuretic, diaphoretic, or antioxidant activity. In this study it was used elderflower syrup both to improve the product s sensorial properties, and for their multiple benefits to health. The sparkling wine based beverage with elderflower syrup was produced by fermentation in the bottle (after Champenoise method, with the addition of wine yeast. The novelty brought by this paper is the use of elderflower syrup in alcoholic-beverage industry.

  11. Methods for the evaluation of antibiotic resistance in Lactobacillus isolated from fermented sausages

    Directory of Open Access Journals (Sweden)

    Hanna Lethycia Wolupeck

    Full Text Available ABSTRACT: The present study aimed to assess the antibiotic resistance in 54 indigenous Lactobacillus plantarum isolated from artisanal fermented sausages. The confirmation of the strain species was performed by multiplex-PCR assay. Antibiotic resistance was assessed by disk diffusion (DD and Minimum Inhibitory Concentration (MIC methods. Of 54 L. plantarum, 44 strains were genotypically confirmed as L. plantarum and 3 as Lactobacillus pentosus. The highest resistance rates were to ampicillin and streptomycin. The highest susceptibility rates were shown to tetracycline, chloramphenicol and penicillin G. None of the strains showed multidrug resistance. Resistance rates by DD and MIC were not different (P>0.05 for ampicillin, chloramphenicol, erythromycin and penicillin G. Future research should assess the genetic mechanisms underlying the phenotypic resistance in Lactobacillus strains to screen the potential probiotic strains for the development of functional meat products.

  12. Radiometric method for the rapid detection of Leptospira organisms

    Energy Technology Data Exchange (ETDEWEB)

    Manca, N.; Verardi, R.; Colombrita, D.; Ravizzola, G.; Savoldi, E.; Turano, A.

    1986-02-01

    A rapid and sensitive radiometric method for detection of Leptospira interrogans serovar pomona and Leptospira interrogans serovar copenhageni is described. Stuart's medium and Middlebrook TB (12A) medium supplemented with bovine serum albumin, catalase, and casein hydrolysate and labeled with /sup 14/C-fatty acids were used. The radioactivity was measured in a BACTEC 460. With this system, Leptospira organisms were detected in human blood in 2 to 5 days, a notably shorter time period than that required for the majority of detection techniques.

  13. Method for rapidly determining a pulp kappa number using spectrophotometry

    Science.gov (United States)

    Chai, Xin-Sheng; Zhu, Jun Yong

    2002-01-01

    A system and method for rapidly determining the pulp kappa number through direct measurement of the potassium permanganate concentration in a pulp-permanganate solution using spectrophotometry. Specifically, the present invention uses strong acidification to carry out the pulp-permanganate oxidation reaction in the pulp-permanganate solution to prevent the precipitation of manganese dioxide (MnO.sub.2). Consequently, spectral interference from the precipitated MnO.sub.2 is eliminated and the oxidation reaction becomes dominant. The spectral intensity of the oxidation reaction is then analyzed to determine the pulp kappa number.

  14. Rapid coulometric method for the Kjeldahl determination of nitrogen.

    Science.gov (United States)

    Boström, C A; Cedergren, A; Johansson, G; Pettersson, I

    1974-11-01

    A rapid coulometric method for the Kjeldahl determination of nitrogen is described. The samples are digested by means of the Tecator AB digestion system which permits forty samples to be digested at the same time. The digestion products are diluted to 75 ml and 1 ml is coulometrically titrated in 1-2 min: 20-30 determinations can be performed per hour. For substances containing nitrogen in the per cent range the relative standard deviations for eight different substances were 0.1-1%.

  15. A Novel Rapid Method to Determine Cannabis Seed Germination Ability

    OpenAIRE

    吉澤, 政夫; 荒金, 眞佐子; 鈴木, 幸子; 北川, 重美; 中嶋, 順一; 森, 謙一郎; 荻野, 周三; Masao, Yoshizawa; Masako, Aragane; Yukiko, Suzuki; Shigemi, Kitagawa; Jun'ichi, Nakajima; Ken'ichiro, Mori; Shuzo, Ogino; 東京都健康安全研究センター薬用植物園

    2011-01-01

    A novel rapid method to determine cannabis seed germination ability was developed. Cannabis seeds were soaked in water for 15 minutes at 40℃, and germs were removed from the seeds by cracking the shell with tweezers. The germs were soaked in water for 15 minutes at 40℃, and the swollen skin was peeled off. The peeled germs were again soaked in water for 10 minutes at 40℃, and the angles between the seed leaves were measured. Cannabis seeds with angles of the seed leaves exceeding 30 degrees w...

  16. A novel real-time polymerase chain reaction-based method for the detection and quantification of lactose-fermenting Enterobacteriaceae in the dairy and other food industries.

    Science.gov (United States)

    Martín, M C; Martínez, N; del Rio, B; Ladero, V; Fernández, M; Alvarez, M A

    2010-03-01

    The presence of lactose-fermenting Enterobacteriaceae and coliforms is routinely assessed to determine the hygienic quality of water and foods, particularly dairy products. This paper reports the use of lacZ-specific primers in an SYBR green I-based real-time PCR method for the easy and rapid detection of coliforms in dairy products. A large number of bacterial species were assayed to establish the specificity of the method. The sensitivity of the method was assessed using artificially contaminated cheeses. The limit of detection was 1 coliform cell in cheese samples enriched for 8h in a culture medium. The entire procedure, including sample processing, enrichment, DNA extraction, and real-time PCR amplification, can be completed within 10 to 12h, making it a single-day assay.

  17. Novel method based on chromogenic media for discrimination and selective enumeration of lactic acid bacteria in fermented milk products.

    Science.gov (United States)

    Galat, Anna; Dufresne, Jérôme; Combrisson, Jérôme; Thépaut, Jérôme; Boumghar-Bourtchai, Leyla; Boyer, Mickaël; Fourmestraux, Candice

    2016-05-01

    Microbial analyses of fermented milk products require selective methods to discriminate between close species simultaneously present in high amounts. A culture-based method combining novel chromogenic agar media and appropriate incubation conditions was developed to enumerate lactic acid bacteria (LAB) strains in fermented milk. M1 agar, containing two chromogenic substrates, allowed selective enumeration of Lactobacillus rhamnosus, two strains of Lactobacillus paracasei subsp. paracasei and Streptococcus salivarius subsp. thermophilus based on differential β-galactosidase and β-glucosidase activities. Depending on the presence of some or all of the above strains, M1 agar was supplemented with L-rhamnose or vancomycin and incubations were carried out at 37 °C or 44 °C to increase selectivity. A second agar medium, M2, containing one chromogenic substrates was used to selectively enumerate β-galactosidase producing Lactobacillus delbrueckii subsp. bulgaricus at 47 °C. By contrast with the usual culture media, the chromogenic method allowed unambiguous enumeration of each species, including discrimination between the two L. paracasei, up to 10(9) CFU/g of fermented milk. In addition, the relevance of the method was approved by enumerating reference ATCC strains in pure cultures and fermented milk product. The method could also be used for enumerations on non-Danone commercial fermented milk products containing strains different from those used in this study, showing versatility of the method. To our knowledge, this is the first description of a chromogenic culture method applied to selective enumeration of LAB. Copyright © 2015 The Authors. Published by Elsevier Ltd.. All rights reserved.

  18. Method for sustaining microorganism culture in syngas fermentation process in decreased concentration or absence of various substrates

    Science.gov (United States)

    Adams, Stephen S.; Scott, Syrona; Ko, Ching-Whan

    2015-05-19

    The present invention relates to methods for sustaining microorganism culture in a syngas fermentation reactor in decreased concentration or absence of various substrates comprising: adding carbon dioxide and optionally alcohol; maintaining free acetic acid concentrations; and performing the above mentioned steps within specified time.

  19. RAPID SEPARATION METHOD FOR EMERGENCY WATER AND URINE SAMPLES

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, S.; Culligan, B.

    2008-08-27

    The Savannah River Site Environmental Bioassay Lab participated in the 2008 NRIP Emergency Response program administered by the National Institute for Standards and Technology (NIST) in May, 2008. A new rapid column separation method was used for analysis of actinides and {sup 90}Sr the NRIP 2008 emergency water and urine samples. Significant method improvements were applied to reduce analytical times. As a result, much faster analysis times were achieved, less than 3 hours for determination of {sup 90}Sr and 3-4 hours for actinides. This represents a 25%-33% improvement in analysis times from NRIP 2007 and a {approx}100% improvement compared to NRIP 2006 report times. Column flow rates were increased by a factor of two, with no significant adverse impact on the method performance. Larger sample aliquots, shorter count times, faster cerium fluoride microprecipitation and streamlined calcium phosphate precipitation were also employed. Based on initial feedback from NIST, the SRS Environmental Bioassay Lab had the most rapid analysis times for actinides and {sup 90}Sr analyses for NRIP 2008 emergency urine samples. High levels of potential matrix interferences may be present in emergency samples and rugged methods are essential. Extremely high levels of {sup 210}Po were found to have an adverse effect on the uranium results for the NRIP-08 urine samples, while uranium results for NRIP-08 water samples were not affected. This problem, which was not observed for NRIP-06 or NRIP-07 urine samples, was resolved by using an enhanced {sup 210}Po removal step, which will be described.

  20. Optimised method for the analysis of phenolic compounds from caper (Capparis spinosa L.) berries and monitoring of their changes during fermentation.

    Science.gov (United States)

    Francesca, Nicola; Barbera, Marcella; Martorana, Alessandra; Saiano, Filippo; Gaglio, Raimondo; Aponte, Maria; Moschetti, Giancarlo; Settanni, Luca

    2016-04-01

    In this work, an ad hoc method to identify and quantify polyphenols from caper berries was developed on high-performance liquid chromatography/electrospray ionisation source/mass spectrometry (HPLC-ESI-MS). The method was applied during fermentation carried out with Lactobacillus pentosus OM13 (Trial S) and without starter (Trial C). A total of five polyphenols were identified. All samples contained high concentrations of rutin. Epicatechin was found in untreated fruits, on the contrary quercetin was detected during fermentation. Trial S was characterised by a more rapid acidification and lower levels of spoilage microorganisms than Trial C. L. pentosus dominated among the microbial community of both trials and the highest biodiversity, in terms of strains, was displayed by Trial C. Aureobasidium pullulans was the only yeast species found. The analytical method proposed allowed a high polyphenolic compound recovery from untreated and processed caper berries in short time. The starter culture reduced the bitter taste of the final product. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. A method for rapid similarity analysis of RNA secondary structures

    Directory of Open Access Journals (Sweden)

    Liu Na

    2006-11-01

    Full Text Available Abstract Background Owing to the rapid expansion of RNA structure databases in recent years, efficient methods for structure comparison are in demand for function prediction and evolutionary analysis. Usually, the similarity of RNA secondary structures is evaluated based on tree models and dynamic programming algorithms. We present here a new method for the similarity analysis of RNA secondary structures. Results Three sets of real data have been used as input for the example applications. Set I includes the structures from 5S rRNAs. Set II includes the secondary structures from RNase P and RNase MRP. Set III includes the structures from 16S rRNAs. Reasonable phylogenetic trees are derived for these three sets of data by using our method. Moreover, our program runs faster as compared to some existing ones. Conclusion The famous Lempel-Ziv algorithm can efficiently extract the information on repeated patterns encoded in RNA secondary structures and makes our method an alternative to analyze the similarity of RNA secondary structures. This method will also be useful to researchers who are interested in evolutionary analysis.

  2. Rapid Methods for the Laboratory Identification of Pathogenic Microorganisms.

    Science.gov (United States)

    1981-09-01

    and fermentation of mannitol (2%, wt/vol) in tubes of cysteine-trypticase agar medium (BBL Micro- biology Systems, Cockeysville, MD), coagulase...and mannitol , phosphatase production and sensitivity to novobiocin (38). These multiple criteria are used primarily by the research laboratory. In...chemicals, salts , and sugars were of the highest analytical grade available. Routinely used lectins were purchased from E-Y Laboratory (San Mateo, CA

  3. A rapid and specific colorimetric method for free tryptophan quantification.

    Science.gov (United States)

    Wu, Yinan; Wang, Tianmin; Zhang, Chong; Xing, Xin-Hui

    2018-01-01

    Tryptophan is one of the eight essential amino acids and plays an important role in many biological processes. For its interaction with human health, environment and relevant commercial interest in biotechnology-based production, rapid and specific quantification method for this molecule accessible to common laboratories is badly needed. We herein reported a simple colorimetric method for free tryptophan quantification with 96-well-plate-level throughput. Our protocol firstly converted tryptophan to indole enzymatically by purified tryptophanases and then used reactivity of indole with hydroxylamine to form pink product with absorption peak at 530nm, enabling the quantification of tryptophan with simple spectrometry in just two hours. We presented that this method exhibited a linear detection range from 100μM to 600μM (R(2) = 0.9969) with no detection towards other naturally occurring tryptophan analogs or tryptophan residues in proteins. It was very robust in complicated biological samples, as demonstrated by quantifying the titer of 36 mutated tryptophan-producing strains with Pearson correlation coefficient of 0.93 in contrast to that measured by high performance liquid chromatography (HPLC). Our method should be potent for routine free tryptophan quantification in a high-throughput manner, facilitating studies in medicine, microbiology, food chemistry, metabolic engineering, etc. Copyright © 2017. Published by Elsevier B.V.

  4. Rapid identification of cytokinins by an immunological method

    Energy Technology Data Exchange (ETDEWEB)

    Morris, R.O.; Jameson, P.E.; Morris, J.W. (Univ. of Missouri-Columbia (USA)); Laloue, M. (Centre Nationale de la Recherche Scientifique, Gif-sur-Yvette (France))

    1991-04-01

    A method for rapid identification of bacterial cytokinins has been developed in which cultures are fed ({sup 3}H)adenine, the cytokinins (including, {sup 3}H-labeled cytokinins) are isolated by immunoaffinity chromatography, and analyzed by HPLC with on-line scintillation counting. Analysis of Agrobacterium tumefaciens strains showed that some produced primarily trans-zeatin, whereas others produced primarily trans-zeatin riboside. Pseudomonas syringae pv savastanoi produced mixtures of transzeatin, dihydrozeatin, 1{double prime}-methyl-trans-zeatin riboside, and other unknown cytokinin-like substances. Corynebacterium fascians, produced cis-zeatin, isopentenyladenine and isopentenyladenosine. The technique is designed for qualitative rather than quantitative studies and allows ready identification of bacterial cytokinins. It may also have utility in the study of plant cytokinins if adequate incorporation of label into cytokinin precursor pools can be achieved.

  5. A rapid protection switching method in carrier ethernet ring networks

    Science.gov (United States)

    Yuan, Liang; Ji, Meng

    2008-11-01

    Abstract: Ethernet is the most important Local Area Network (LAN) technology since more than 90% data traffic in access layer is carried on Ethernet. From 10M to 10G, the improving Ethernet technology can be not only used in LAN, but also a good choice for MAN even WAN. MAN are always constructed in ring topology because the ring network could provide resilient path protection by using less resource (fibre or cable) than other network topologies. In layer 2 data networks, spanning tree protocol (STP) is always used to protect transmit link and preventing the formation of logic loop in networks. However, STP cannot guarantee the efficiency of service convergence when link fault happened. In fact, convergent time of networks with STP is about several minutes. Though Rapid Spanning Tree Protocol (RSTP) and Multi-Spanning Tree Protocol (MSTP) improve the STP technology, they still need a couple of seconds to achieve convergence, and can not provide sub-50ms protection switching. This paper presents a novel rapid ring protection method (RRPM) for carrier Ethernet. Unlike other link-fault detection method, it adopts distributed algorithm to detect link fault rapidly (sub-50ms). When networks restore from link fault, it can revert to the original working state. RRPM can provide single ring protection and interconnected ring protection without the formation of super loop. In normal operation, the master node blocks the secondary port for all non-RRPM Ethernet frames belonging to the given RRPM Ring, thereby avoiding a loop in the ring. When link fault happens, the node on which the failure happens moves from the "ring normal" state to the "ring fault" state. It also sends "link down" frame immediately to other nodes and blocks broken port and flushes its forwarding database. Those who receive "link down" frame will flush forwarding database and master node should unblock its secondary port. When the failure restores, the whole ring will revert to the normal state. That is

  6. Culture medium optimization for osmotolerant yeasts by use of a parallel fermenter system and rapid microbiological testing.

    Science.gov (United States)

    Pfannebecker, Jens; Schiffer-Hetz, Claudia; Fröhlich, Jürgen; Becker, Barbara

    2016-11-01

    In the present study, a culture medium for qualitative detection of osmotolerant yeasts, named OM, was developed. For the development, culture media with different concentrations of glucose, fructose, potassium chloride and glycerin were analyzed in a Biolumix™ test incubator. Selectivity for osmotolerant yeasts was guaranteed by a water activity (aw)-value of 0.91. The best results regarding fast growth of Zygosaccharomyces rouxii (WH 1002) were achieved in a culture medium consisting of 45% glucose, 5% fructose and 0.5% yeast extract and in a medium with 30% glucose, 10% glycerin, 5% potassium chloride and 0.5% yeast extract. Substances to stimulate yeast fermentation rates were analyzed in a RAMOS® parallel fermenter system, enabling online measurement of the carbon dioxide transfer rate (CTR) in shaking flasks. Significant increases of the CTR was achieved by adding especially 0.1-0.2% ammonium salts ((NH4)2HPO4, (NH4)2SO4 or NH4NO3), 0.5% meat peptone and 1% malt extract. Detection times and the CTR of 23 food-borne yeast strains of the genera Zygosaccharomyces, Torulaspora, Schizosaccharomyces, Candida and Wickerhamomyces were analyzed in OM bouillon in comparison to the selective culture media YEG50, MYG50 and DG18 in the parallel fermenter system. The OM culture medium enabled the detection of 102CFU/g within a time period of 2-3days, depending on the analyzed yeast species. Compared with YEG50 and MYG50 the detection times could be reduced. As an example, W. anomalus (WH 1021) was detected after 124h in YEG50, 95.5h in MYG50 and 55h in OM bouillon. Compared to YEG50 the maximum CO2 transfer rates for Z. rouxii (WH 1001), T. delbrueckii (DSM 70526), S. pombe (DSM 70576) and W. anomalus (WH 1016) increased by a factor ≥2.6. Furthermore, enrichment cultures of inoculated high-sugar products in OM culture medium were analyzed in the Biolumix™ system. The results proved that detection times of 3days for Z. rouxii and T. delbrueckii can be realized by

  7. Method for Rapid Protein Identification in a Large Database

    Directory of Open Access Journals (Sweden)

    Wenli Zhang

    2013-01-01

    Full Text Available Protein identification is an integral part of proteomics research. The available tools to identify proteins in tandem mass spectrometry experiments are not optimized to face current challenges in terms of identification scale and speed owing to the exponential growth of the protein database and the accelerated generation of mass spectrometry data, as well as the demand for nonspecific digestion and post-modifications in complex-sample identification. As a result, a rapid method is required to mitigate such complexity and computation challenges. This paper thus aims to present an open method to prevent enzyme and modification specificity on a large database. This paper designed and developed a distributed program to facilitate application to computer resources. With this optimization, nearly linear speedup and real-time support are achieved on a large database with nonspecific digestion, thus enabling testing with two classical large protein databases in a 20-blade cluster. This work aids in the discovery of more significant biological results, such as modification sites, and enables the identification of more complex samples, such as metaproteomics samples.

  8. Unraveling microbial ecology of industrial-scale Kombucha fermentations by metabarcoding and culture-based methods.

    Science.gov (United States)

    Coton, Monika; Pawtowski, Audrey; Taminiau, Bernard; Burgaud, Gaëtan; Deniel, Franck; Coulloumme-Labarthe, Laurent; Fall, Abdoulaye; Daube, Georges; Coton, Emmanuel

    2017-05-01

    Kombucha, historically an Asian tea-based fermented drink, has recently become trendy in Western countries. Producers claim it bears health-enhancing properties that may come from the tea or metabolites produced by its microbiome. Despite its long history of production, microbial richness and dynamics have not been fully unraveled, especially at an industrial scale. Moreover, the impact of tea type (green or black) on microbial ecology was not studied. Here, we compared microbial communities from industrial-scale black and green tea fermentations, still traditionally carried out by a microbial biofilm, using culture-dependent and metabarcoding approaches. Dominant bacterial species belonged to Acetobacteraceae and to a lesser extent Lactobacteriaceae, while the main identified yeasts corresponded to Dekkera, Hanseniaspora and Zygosaccharomyces during all fermentations. Species richness decreased over the 8-day fermentation. Among acetic acid bacteria, Gluconacetobacter europaeus, Gluconobacter oxydans, G. saccharivorans and Acetobacter peroxydans emerged as dominant species. The main lactic acid bacteria, Oenococcus oeni, was strongly associated with green tea fermentations. Tea type did not influence yeast community, with Dekkera bruxellensis, D. anomala, Zygosaccharomyces bailii and Hanseniaspora valbyensis as most dominant. This study unraveled a distinctive core microbial community which is essential for fermentation control and could lead to Kombucha quality standardization. © FEMS 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  9. Methods of lab silos sealing and fermentation characteristics and aerobic stability of sugarcane silage treated with microbial additive

    Directory of Open Access Journals (Sweden)

    Charles Ortiz Novinski

    2012-02-01

    Full Text Available The present experimental assay evaluated the effect of lab silo sealing methods on the ensilage of the sugarcane, with or without microbial additives (Lactobacillus plantarum and Propionibacterium acidipropionici. Twenty-liter plastic buckets were used as experimental silos, which were sealed with either a polyethylene sheet (silo cover with a mesh size of 200 µm or an appropriate plastic lid equipped with Bunsen valve. Silos were stored for 30, 60, or 90 days. Fermentative losses, chemical composition, organic acids, ethanol and aerobic stability were evaluated. The sealing method employed did not influence most of evaluated variables, showing a small decrease of effluent production in silos covered with polyethylene sheet. The microbial additive did not avoid dry matter (DM fermentative losses in sugarcane silages (216 g kg-1, nor affected aerobic stability (44.6 hours. The levels of neutral and acid detergent fiber of fresh sugarcane increased after ensiling due to DM losses as gases and effluent. The ethanol content of silages was not influenced by treatments (mean 146 g kg-1 of DM. The sealing methods of experimental silos were not affected by the evaluated variables; polyethylene sheet and plastic lid show the same performance on the fermentative model and both methods represent well the conditions of large scale farm silos.

  10. A SIMPLE METHOD TO CONTROL THE MOISTURE CONTENT OF THE FERMENTING MEDIUM DURING LABORATORY-SCALE SOLID-STATE FERMENTATION EXPERIMENTS

    OpenAIRE

    Borzani, W.; SALOMÃO,G. L.; Martins, J.C.; Alonso, V.

    1999-01-01

    When the moisture content of the fermenting medium significantly decreases during laboratory-scale solid-state fermentation tests, the quantity of water to be periodically added to the medium in order to control its moisture content may be evaluated from the water evaporation rate of the non-inoculated medium.

  11. A SIMPLE METHOD TO CONTROL THE MOISTURE CONTENT OF THE FERMENTING MEDIUM DURING LABORATORY-SCALE SOLID-STATE FERMENTATION EXPERIMENTS

    Directory of Open Access Journals (Sweden)

    W. BORZANI

    1999-03-01

    Full Text Available When the moisture content of the fermenting medium significantly decreases during laboratory-scale solid-state fermentation tests, the quantity of water to be periodically added to the medium in order to control its moisture content may be evaluated from the water evaporation rate of the non-inoculated medium.

  12. Evaluation of an in vitro fibre fermentation method using feline faecal inocula: inter-individual variation.

    Science.gov (United States)

    Bosch, Guido; Heesen, Lisa; de Melo Santos, Karine; Cone, John W; Pellikaan, Wilbert F; Hendriks, Wouter H

    2017-01-01

    The present study aimed to evaluate the inter-individual variability in fermentation of standard fibrous substrates by faecal inocula from ten healthy adult female cats. Substrates were citrus pectin (CP), fructo-oligosaccharides (FOS), guar gum (GG), sugar beet pulp (SBP) and wheat middlings (WM). Each substrate was incubated with faecal inoculum from each cat. Gas production was measured continuously during the 48 h incubation and SCFA and organic matter disappearance (only SBP and WM) after incubation. Out of ten cats, nine produced faeces on the days of inoculum preparation. The substrates contrasted in terms of fermentation parameters measured. The inter-individual variability was in general lower for the more simple and pure substrates (CP, FOS, GG) than for the more complex substrates containing mixtures of fibres (SBP, WM). Furthermore, for total SCFA and gas produced, inter-individual variability was lower than for proportions of butyrate and of branched-chain fatty acids and for the parameters of gas production kinetics. It is concluded that the variability in in vitro fermentation parameters is associated with the complexity of fibrous substrates. The presented data are instrumental for the calculation of number of faecal donors required for precise in vitro characterisation of the fermentability of dietary fibres. In addition, the number of faecal donors should be adjusted to the specific fermentation parameter(s) of interest.

  13. A Method for Producing Bioethanol from the Lignocellulose of Shorea uliginosa Foxw. by Enzymatic Saccharification and Fermentation

    Directory of Open Access Journals (Sweden)

    Wahyu Dwianto

    2014-07-01

    Full Text Available Several papers have reported various technical aspects of lignocellulosic bioethanol production. Recalcitrance to saccharification is a major limitation for conversion of lignocellulosic biomass to ethanol. The biological process for converting lignocellulose to fuel ethanol includes delignification in order to liberate cellulose and hemicelluloses, depolymerization of carbohydrate polymers to produce free sugars, and sugar fermentation to produce ethanol. Access of plant cell wall polysaccharides to chemical, enzymatic and microbial digestion is limited by many factors, including the presence of lignin and hemicellulose that cover cellulose microfibrils. An effort to support the fuel ethanol fermentation industry using the Indonesian woody plant species Shorea uliginosa Foxw., was undertaken with regard to the established efficient bioethanol production process. This paper relates to a method for producing bioethanol from the lignocellulose of S. uliginosa Foxw. by saccharification and fermentation of xylem. A literature study of previous research on cellulose hydrolysis as a method for producing bioethanol was necessary. The objective of this study was to gain a deeper understanding of the degradation mechanisms of cellulose by enzymes through a study of previous research, which were then compared to the new method.

  14. RAPID TEST METHOD FOR EVALUATION OF ANTIFREEZE ADDITIVE EFFICIENCY

    Directory of Open Access Journals (Sweden)

    S. V. Gushchin

    2015-01-01

    Full Text Available Usage of chemical additives while executing concrete works at negative temperatures is considered as a convenient and economical method. Range of the used antifreeze additives is rather wide. A great number of new additives are advertised but their characteristics have not been practically studied. Evaluation of the antifreeze additive efficiency is unfortunately rather long process and it does not provide comprehensive data on concrete structure formation processes. Due to this development of rapid and comprehensive methodology for construction companies is urgently required.Freezing processes of antifreeze additive aqueous solutions and hardening of cement paste with them have been investigated in the paper. The paper proposes a methodology for determination of freezing point for aqueous solutions of chemical additives of various applications. Identity of  freezing point for a chemical additive aqueous solution and cement paste with an equal concentration of the additive in the paste pore fluid has been determined while taking  calcium nitrate and sodium formate additives as an example. The paper demonstrates the possibility to evaluate efficiency of antifreeze additive action on the basis of kinetics in temperature changes of the cement paste with additives by its consecutive freezing and defrosting.  A methodology for operational evaluation in the field of chemical additive application for concreting items at negative temperatures has been offered in the paper.  The methodology does not require  deficient and expensive test-equipment. It can be applied at ordinary construction companies and it is comprehensible for personnel of low-qualification.  The paper shows the possibility to develop an original methodology for designing concrete structure which is based on operating efficiency determinations  for single and integrated antifreeze additives.

  15. A new rapid method for rockfall energies and distances estimation

    Science.gov (United States)

    Giacomini, Anna; Ferrari, Federica; Thoeni, Klaus; Lambert, Cedric

    2016-04-01

    and distances at the base to block and slope features. The validation of the proposed approach was conducted by comparing predictions to experimental data collected in the field and gathered from the scientific literature. The method can be used for both natural and constructed slopes and easily extended to more complicated and articulated slope geometries. The study shows its great potential for a quick qualitative hazard assessment providing indication about impact energy and horizontal distance of the first impact at the base of a rock cliff. Nevertheless, its application cannot substitute a more detailed quantitative analysis required for site-specific design of mitigation measures. Acknowledgements The authors gratefully acknowledge the financial support of the Australian Coal Association Research Program (ACARP). References Dorren, L.K.A. (2003) A review of rockfall mechanics and modelling approaches, Progress in Physical Geography 27(1), 69-87. Agliardi, F., Crosta, G.B., Frattini, P. (2009) Integrating rockfall risk assessment and countermeasure design by 3D modelling techniques. Natural Hazards and Earth System Sciences 9(4), 1059-1073. Ferrari, F., Thoeni, K., Giacomini, A., Lambert, C. (2016) A rapid approach to estimate the rockfall energies and distances at the base of rock cliffs. Georisk, DOI: 10.1080/17499518.2016.1139729.

  16. Effects of sonication on the extraction of free-amino acids from moromi and application to the laboratory scale rapid fermentation of soy sauce.

    Science.gov (United States)

    Goh, Kok Ming; Lai, Oi Ming; Abas, Faridah; Tan, Chin Ping

    2017-01-15

    Soy sauce fermentation was simulated in a laboratory and subjected to 10min of sonication. A full factorial design, including different cycles, probe size, and amplitude was used. The composition of 17 free-amino acids (FAAs) was determined by the AccQ-Tag method with fluorescent detection. Main effect plots showed total FAAs extraction was favoured under continuous sonication at 100% amplitude using a 14mm diameter transducer probe, reaching 1214.2±64.3mg/100ml of total FAAs. Moreover, after 7days of fermentation, sonication treatment caused significantly higher levels (p<0.05) of glutamic acids (343.0±22.09mg/100g), total FAAs (1720.0±70.6mg/100g), and essential FAAs (776.3±7.0mg/100g) 3days sooner than the control. Meanwhile, enzymatic and microbial behaviours remained undisturbed. Collectively, the sonication to moromi resulted in maturation 57% faster than the untreated control. Copyright © 2016 Elsevier Ltd. All rights reserved.

  17. Rapid Methods for detection of Veterinary Drug residues in Meat

    Directory of Open Access Journals (Sweden)

    Chandan

    2010-10-01

    methodologies, the variety of residues to search per sample and the need to invest on powerful new instruments for identification and confirmatory purposes. Rapid and versatile screening methodologies make its control easier and reduce the number of non-compliant samples to be confirmed through tedious and costly confirmatory analytical methodologies. For instance, the multiresidue analysis can be performed better by using fast LC methods. Thus, the availability of new screening methodologies and the improvement of the existing ones will contribute to a better safety assurance of meat and other foods of animal origin. [Vet. World 2010; 3(5.000: 241-246

  18. Penerapan Teknologi Fermentasi Pada Bioproses Fermentasi Minyak Kelapa (Fermikel)* [Bioprocessing of Fermented Coconut Oil by Application of Fermentation Technology

    OpenAIRE

    Sulistyo, Joko; Soeka, Yati Sudaryati; Triana, Evi; Napitupulu, Rostiati NR

    1999-01-01

    Methods of extracting oil from coconut endosperm by fermentatbn were studied. The factors which must be controlled to break the emulsion and liberate oil were investigated. It was found that grinding conditions exerted a profound effect upon the stability of the coconut milk emulsion. The optimum condition for rapid fermentathn of coconut milk was related to the condition during incubation period. The fermentation progressed best under mild conditions (28°-40 °Cj. The fermentation was succe...

  19. Evaluation of an in vitro fibre fermentation method using feline faecal inocula

    NARCIS (Netherlands)

    Bosch, Guido; Heesen, Lisa; Melo Santos, de Karine; Cone, John W.; Pellikaan, Wilbert F.; Hendriks, Wouter H.

    2017-01-01

    The present study aimed to evaluate the inter-individual variability in fermentation of standard fibrous substrates by faecal inocula from ten healthy adult female cats. Substrates were citrus pectin (CP), fructo-oligosaccharides (FOS), guar gum (GG), sugar beet pulp (SBP) and wheat middlings

  20. Rapid method for identification of transgenic fish zygosity

    Directory of Open Access Journals (Sweden)

    . Alimuddin

    2007-07-01

    Full Text Available Identification of zygosity in transgenik fish is normally achieved by PCR analysis with genomic DNA template extracted from the tissue of progenies which are derived by mating the transgenic fish and wild-type counterpart.  This method needs relatively large amounts of fish material and is time- and labor-intensive. New approaches addressing this problem could be of great help for fish biotechnologists.  In this experiment, we applied a quantitative real-time PCR (qr-PCR method to analyze zygosity in a stable line of transgenic zebrafish (Danio rerio carrying masu salmon, Oncorhynchus masou D6-desaturase-like gene. The qr-PCR was performed using iQ SYBR Green Supermix in the iCycler iQ Real-time PCR Detection System (Bio-Rad Laboratories, USA.  Data were analyzed using the comparative cycle threshold method.  The results demonstrated a clear-cut identification of all transgenic fish (n=20 classified as a homozygous or heterozygous.  Mating of those fish with wild-type had revealed transgene transmission to the offspring following expected Mendelian laws. Thus, we found that the qTR-PCR to be effective for a rapid and precise determination of zygosity in transgenic fish. This technique could be useful in the establishment of breeding programs for mass transgenic fish production and in experiments in which zygosity effect could have a functional impact. Keywords: quantitative real-time PCR; zygosity; transgenic fish; mass production   ABSTRAK Identifikasi sigositas ikan transgenik biasanya dilakukan menggunakan analisa PCR dengan cetakan DNA genomik yang diekstraksi dari jaringan ikan hasil persilangan antara ikan transgenik dan ikan normal.   Metode ini memerlukan ikan dalam jumlah yang banyak, dan juga waktu serta tenaga.  Pendekatan baru untuk mengatasi masalah tersebut akan memberikan manfaat besar kepada peneliti bioteknologi perikanan.  Pada penelitian ini, kami menggunakan metode PCR real-time kuantitatif (krt-PCR untuk

  1. Comparison of molecular techniques with other methods for identification and enumeration of probiotics in fermented milk products.

    Science.gov (United States)

    Bagheripoor-Fallah, Niloofar; Mortazavian, Amir; Hosseini, Hedayat; Khoshgozaran-Abras, Sadegh; Rad, Aziz Homayouni

    2015-01-01

    Nowadays, an increasing attention is being given to fermented milk products including yogurt, kefir, buttermilk, and acidophilus milk. Fermented milks, especially the ones containing probiotics, are claimed to be useful for health of host (such as intestinal- and immune-associated diseases). Their healthful effects could be significantly enhanced by incorporating probiotic microorganisms; those have healthful advantages for host when consumed in an appropriate viable number in food products. Probiotic dairy products have stepped to the market and are being commercially produced under various brand names. In addition, these products are legislatively obliged to be labeled for the microorganisms contained. Therefore, identification and enumeration of their microorganisms are a cause of concern. Several culture-dependent methods have been introduced and used to identify the microorganisms, in which the researchers have experienced multiple difficulties. Thereby, molecular approaches were present as an alternative, offering advantages such as accuracy, sensitivity, specificity, and speed. This article reviews the molecular approaches employed for identification and enumeration of probiotics in fermented milk products.

  2. A rapid cloning method employing orthogonal end protection

    NARCIS (Netherlands)

    Jakobi, A.J.|info:eu-repo/dai/nl/311489621; Huizinga, E.G.|info:eu-repo/dai/nl/12314969X

    2012-01-01

    We describe a novel in vitro cloning strategy that combines standard tools in molecular biology with a basic protecting group concept to create a versatile framework for the rapid and seamless assembly of modular DNA building blocks into functional open reading frames. Analogous to chemical

  3. Bacterial Ecology of Fermented Cucumber Rising pH Spoilage as Determined by Non-Culture Based Methods

    Science.gov (United States)

    Medina, Eduardo; Pérez-Díaz, Ilenys M.; Breidt, Fred; Hayes, Janet; Franco, Wendy; Butz, Natasha; Azcarate-Peril, María Andrea

    2016-01-01

    Fermented cucumber spoilage (FCS) characterized by rising pH and the appearance of manure and cheese like aromas is a challenge of significant economical impact for the pickling industry. Previous culture based studies identified the yeasts Pichia manshurica and Issatchenkia occidentalis, four gram positive bacteria, Lactobacillus buchneri, Lactobacillus parrafaraginis, Clostridium sp. and Propionibacterium and one gram-negative genus, Pectinatus as relevant in various stages of FCS given their ability to metabolize lactic acid. It was the objective of this study to augment the current knowledge of FCS using culture independent methods to microbiologically characterize commercial spoilage samples. Ion Torrent data and 16S rRNA cloning library analyses of samples collected from commercial fermentation tanks confirmed the presence of L. rapi and L. buchneri and revealed the presence of additional species involved in the development of FCS such as Lactobacillus namurensis, Lactobacillus acetotolerans, Lactobacillus panis, Acetobacter peroxydans, Acetobacter aceti, and Acetobacter pasteurianus at pH below 3.4. The culture independent analyses also revealed the presence of species of Veillonella and Dialister in spoilage samples with pH above 4.0 and confirmed the presence of Pectinatus spp. during lactic acid degradation at the higher pH. Acetobacter spp. were successfully isolated from commercial samples collected from tanks subjected to air purging by plating on Mannitol Yeast Peptone agar. In contrast, Lactobacillus spp. were primarily identified in samples of FCS collected from tanks not subjected to air purging for more than 4 months. Thus, it is speculated that oxygen availability may be a determining factor in the initiation of spoilage and the leading microbiota. Practical Application Understanding of the underlying microbiology and biochemistry driving FCS is essential to enhancing the sodium chloride (NaCl)-free cucumber fermentation technology and in

  4. Screening of Ganoderma strains with high polysaccharides and ganoderic acid contents and optimization of the fermentation medium by statistical methods.

    Science.gov (United States)

    Wei, Zhen-hua; Duan, Ying-yi; Qian, Yong-qing; Guo, Xiao-feng; Li, Yan-jun; Jin, Shi-he; Zhou, Zhong-Xin; Shan, Sheng-yan; Wang, Chun-ru; Chen, Xue-Jiao; Zheng, Yuguo; Zhong, Jian-Jiang

    2014-09-01

    Polysaccharides and ganoderic acids (GAs) are the major bioactive constituents of Ganoderma species. However, the commercialization of their production was limited by low yield in the submerged culture of Ganoderma despite improvement made in recent years. In this work, twelve Ganoderma strains were screened to efficiently produce polysaccharides and GAs, and Ganoderma lucidum 5.26 (GL 5.26) that had been never reported in fermentation process was found to be most efficient among the tested stains. Then, the fermentation medium was optimized for GL 5.26 by statistical method. Firstly, glucose and yeast extract were found to be the optimum carbon source and nitrogen source according to the single-factor tests. Ferric sulfate was found to have significant effect on GL 5.26 biomass production according to the results of Plackett-Burman design. The concentrations of glucose, yeast extract and ferric sulfate were further optimized by response surface methodology. The optimum medium composition was 55 g/L of glucose, 14 g/L of yeast extract, 0.3 g/L of ferric acid, with other medium components unchanged. The optimized medium was testified in the 10-L bioreactor, and the production of biomass, IPS, total GAs and GA-T enhanced by 85, 27, 49 and 93 %, respectively, compared to the initial medium. The fermentation process was scaled up to 300-L bioreactor; it showed good IPS (3.6 g/L) and GAs (670 mg/L) production. The biomass was 23.9 g/L in 300-L bioreactor, which was the highest biomass production in pilot scale. According to this study, the strain GL 5.26 showed good fermentation property by optimizing the medium. It might be a candidate industrial strain by further process optimization and scale-up study.

  5. Rapid Radiochemical Method for Americium-241 in Building ...

    Science.gov (United States)

    Technical Fact Sheet Analysis Purpose: Qualitative analysis Technique: Alpha spectrometry Method Developed for: Americium-241 in building materials Method Selected for: SAM lists this method for qualitative analysis of americium-241 in concrete or brick building materials. Summary of subject analytical method which will be posted to the SAM website to allow access to the method.

  6. Rapid Radiochemical Method for Radium-226 in Building ...

    Science.gov (United States)

    Technical Fact Sheet Analysis Purpose: Qualitative analysis Technique: Alpha spectrometry Method Developed for: Radium-226 in building materials Method Selected for: SAM lists this method for qualitative analysis of radium-226 in concrete or brick building materials Summary of subject analytical method which will be posted to the SAM website to allow access to the method.

  7. Yeast Population Dynamics in Spontaneous and Inoculated Alcoholic Fermentations of Zametovka Must

    Directory of Open Access Journals (Sweden)

    Franc Cus

    2002-01-01

    Full Text Available Inoculated fermentations, which are more rapid and more reliable than spontaneous fermentations, and assure predictable wine quality, are nowadays prevalent in Slovenia’s large-scale wine production. However, spontaneous fermentation strengthens local characteristics of wine and offers opportunities for technological innovation. In the 1999 vintage, spontaneous and inoculated fermentations of Zametovka (Vitis vinifera grape must were studied. Zametovka is the main red variety in production of traditional Slovene red blend wine, Cvicek. The diversity of yeast species and strains in both of the investigated fermentations was determined by molecular and traditional identification methods. The outset of alcoholic fermentation, yeast growth kinetics, and yeast population dynamics presents the main differences between the examined fermentations. Yeast population diversity was higher in the spontaneous process. Dominant yeast isolates from spontaneous fermentation were identified as Candida stellata, Hanseniaspora uvarum and Saccharomyces cerevisiae; whereas Saccharomyces bayanus, Pichia kluyveri, Pichia membranifaciens and Torulaspora delbrueckiim were found less frequently. Dominant species in the inoculated fermentation was Saccharomyces cerevisiae; other species found in smaller numbers were Candida stellata, Hanseniaspora uvarum and Debaryomyces hansenii var. hansenii. Using PFGE, we were able to distinguish among 15 different Saccharomyces cerevisiae strains and three different Saccharomyces bayanus strains isolated from spontaneous fermentation, whereas, in the case of inoculated fermentation, only two Saccharomyces cerevisiae strains were found. Their chromosomal patterns coincide with the chromosomal patterns of the starter culture strains.

  8. Rapid method for plutonium-241 determination in soil samples

    OpenAIRE

    Piekarz, M.; Komosa, A.

    2014-01-01

    A simple and rapid procedure for the determination of plutonium isotopes in the environment is presented. The procedure combines alpha spectrometry, solvent extraction and liquid scintillation measurements to ensure that both alpha- and beta-emitting isotopes are determined. Of five tested extractants, bis-(2-ethylhexyl) phosphoric acid was found to be the best choice. The procedure was applied to soil samples contaminated with Chernobyl fallout.

  9. Genomic diversity of Saccharomyces cerevisiae yeasts associated with alcoholic fermentation of bacanora produced by artisanal methods.

    Science.gov (United States)

    Álvarez-Ainza, M L; Zamora-Quiñonez, K A; Moreno-Ibarra, G M; Acedo-Félix, E

    2015-03-01

    Bacanora is a spirituous beverage elaborated with Agave angustifolia Haw in an artisanal process. Natural fermentation is mostly performed with native yeasts and bacteria. In this study, 228 strains of yeast like Saccharomyces were isolated from the natural alcoholic fermentation on the production of bacanora. Restriction analysis of the amplified region ITS1-5.8S-ITS2 of the ribosomal DNA genes (RFLPr) were used to confirm the genus, and 182 strains were identified as Saccharomyces cerevisiae. These strains displayed high genomic variability in their chromosomes profiles by karyotyping. Electrophoretic profiles of the strains evaluated showed a large number of chromosomes the size of which ranged between 225 and 2200 kpb approximately.

  10. Rice Fermentation Starters in Cambodia: Cultural Importance and Traditional Methods of Production

    OpenAIRE

    Yamamoto, Sota; Matsumoto, Tetsuo

    2011-01-01

    This paper focuses on the processes of producing fermentation starters in Cambodia, in order to explore the dispersal routes of starters in Southeast Asia. Spices, herbs, and a sweet ingredient are widely used to make starters in Cambodia, and many people put new starters on rice husks or straw. These widely distributed techniques may have originated in one place and later dispersed throughout Southeast Asia. Two different production processes are used in Cambodia: one based on a “rice wine c...

  11. Effect of fermentation and sterilization on anthocyanins in blueberry.

    Science.gov (United States)

    Nie, Qixing; Feng, Lei; Hu, Jielun; Wang, Sunan; Chen, Haihong; Huang, Xiaojun; Nie, Shaoping; Xiong, Tao; Xie, Mingyong

    2017-03-01

    Blueberry products have various health benefits due to their high content of dietary anthocyanins. The aim of this study was to investigate the impact of fermentation and sterilization on total anthocyanin content, composition and some quality attributes of blueberry puree. The blueberry puree used here was fermented for 40 h at 37 °C by Lactobacillus after sterilization. The method of ultra-performance liquid chromatography-mass spectrometry was optimized for the rapid analysis of anthocyanins. Quality attributes including pH, color, total soluble solids and viscosity were measured. A total of 21 anthocyanins and five anthocyanidins were quantified by ultra-performance liquid chromatography. Fermented blueberry had reduced total anthocyanin content (29%) and levels of individual anthocyanins compared with fresh blueberry. Total anthocyanin content was decreased 46% by sterilization, and different degradation behavior of individual anthocyanin was appeared between fermented and sterilized-fermented blueberry puree. Fermentation and sterilization decreased the total soluble solids and pH and changed color parameters, while minimally influencing viscosity. The loss of total anthocyanin content by fermentation was related to the unstable structure of blueberry anthocyanins. Anthocyanins are sensitive to temperature (>80 °C), and degradation of anthocyanins by sterilization in blueberry should be considered in the fermentation procedure. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

  12. Effect of Fermentation Temperature on the Volatile Composition of Kimchi.

    Science.gov (United States)

    Hong, Sang Pil; Lee, Eun Joo; Kim, Young Ho; Ahn, Dong Uk

    2016-10-17

    This study was conducted to evaluate the effect of fermentation temperature on the volatile composition in Kimchi. Kimchi was fermented at 2 temperature conditions (4 and 20 °C). Volatile compounds of Kimchi samples were analyzed during the fermentation periods using the dynamic headspace gas chromatography-mass spectrometry method. The optimum ripening time for the Kimchi fermented at 4 °C was 35 d, and that of 20 °C was 2 d. The pH at the optimum ripening time was 4.97 and 4.41, and the titratable acidity was 0.59% and 0.76% for the Kimchi fermented at 4 and 20 °C, respectively. Forty different types of volatile compounds, including alcohol, aldehyde, ester, and sulfur compounds, were identified. The Kimchi fermented at 20 °C produced greater amounts of volatile compounds than that at 4 °C. The amounts of most volatiles increased as the fermentation time increased, but those of aldehydes decreased rapidly during both 4 and 20 °C fermentation. Organic acids, ester, and nitriles were detected only in Kimchi fermented at 20 °C. The amounts of dimethyl disulfide, methyl-2-propenyl disulfide, and di-2-propenyl disulfide produced from the Kimchi fermented at 20 °C were more than 2-times of those at 4 °C. Therefore, it is concluded that the strong pungent odor of Kimchi fermented at 20° C is probably due to the high amount of organic acids (low pH) and sulfur compounds (dimethyl disulfide, methyl-2-propenyl disulfide, and di-2-propenyl disulfide) between the 2 Kimchi. © 2016 Institute of Food Technologists®.

  13. Identification of Yeasts Present in Sour Fermented Foods and Fodder

    NARCIS (Netherlands)

    Middelhoven, W.J.

    2002-01-01

    This paper deals with rapid methods for identification of 50 yeast species frequently isolated from foods and fodders that underwent a lactic acid fermentation. However, many yeast species present in olive brine, alpechin, and other olive products were not treated. The methods required for

  14. A rapid, small-scale sedimentation method to predict breadmaking quality of hard winter wheat

    Science.gov (United States)

    Breeders and processors are always looking for rapid and accurate methods to evaluate wheat quality. A rapid small-scale hybrid sedimentation method was developed for predicting breadmaking quality of breeders samples by combining the sodium dodecyl-sulfate (SDS) sedimentation method (AACC 56-70) an...

  15. A new method for monitoring the extracellular proteolytic activity of wine yeasts during alcoholic fermentation of grape must.

    Science.gov (United States)

    Chasseriaud, Laura; Miot-Sertier, Cécile; Coulon, Joana; Iturmendi, Nerea; Moine, Virginie; Albertin, Warren; Bely, Marina

    2015-12-01

    The existing methods for testing proteolytic activity are time consuming, quite difficult to perform, and do not allow real-time monitoring. Proteases have attracted considerable interest in winemaking and some yeast species naturally present in grape must, such as Metschnikowia pulcherrima, are capable of expressing this activity. In this study, a new test is proposed for measuring proteolytic activity directly in fermenting grape must, using azocasein, a chromogenic substrate. Several yeast strains were tested and differences in proteolytic activity were observed. Moreover, analysis of grape must proteins in wines revealed that protease secreted by Metschnikowia strains may be active against wine proteins. Copyright © 2015. Published by Elsevier B.V.

  16. A rapid method to estimate Westergren sedimentation rates

    Science.gov (United States)

    Alexy, Tamas; Pais, Eszter; Meiselman, Herbert J.

    2009-01-01

    The erythrocyte sedimentation rate (ESR) is a nonspecific but simple and inexpensive test that was introduced into medical practice in 1897. Although it is commonly utilized in the diagnosis and follow-up of various clinical conditions, ESR has several limitations including the required 60 min settling time for the test. Herein we introduce a novel use for a commercially available computerized tube viscometer that allows the accurate prediction of human Westergren ESR rates in as little as 4 min. Owing to an initial pressure gradient, blood moves between two vertical tubes through a horizontal small-bore tube and the top of the red blood cell (RBC) column in each vertical tube is monitored continuously with an accuracy of 0.083 mm. Using data from the final minute of a blood viscosity measurement, a sedimentation index (SI) was calculated and correlated with results from the conventional Westergren ESR test. To date, samples from 119 human subjects have been studied and our results indicate a strong correlation between SI and ESR values (R2=0.92). In addition, we found a close association between SI and RBC aggregation indices as determined by an automated RBC aggregometer (R2=0.71). Determining SI on human blood is rapid, requires no special training and has minimal biohazard risk, thus allowing physicians to rapidly screen for individuals with elevated ESR and to monitor therapeutic responses. PMID:19791973

  17. Comparison of rapid colorimetric method with conventional method in the isolation of mycobacterium tuberculosis

    Directory of Open Access Journals (Sweden)

    Oberoi A

    2004-01-01

    Full Text Available The aim of the study was to evaluate two methods (colorimetric and conventional for isolation of Mycobacterium tuberculosis. A total of 500 clinical specimens were processed by modified Petroff′s method and then inoculated into MB/BacT-240 system bottles and on LJ medium slopes. The specimens included 242 sputum, 95 gastric aspirates, 47 pleural fluids, 45 CSF, 32 urine, 18 pus, 11 bronchoalveolar lavage, 3 tissue, 2 stool, 2 lymphnode specimens, 2 synovial fluid and 1 bronchial wash specimens. The isolation rate was 16.4% by the colorimetric method and 2.2% by the conventional method. The mean detection time was 16 days and 26 days respectively. Among 36 direct smear positive samples, 63.9%(23/36 and 30%(11/36 were positive by colorimetric and conventional methods respectively. Out of 464 direct smear negative samples 12.9%(60/464 and 0.6%(3/464 were positive by colorimetric and conventional methods respectively. Therefore, colorimetric method enables rapid detection leading to early diagnosis and drug susceptibility testing.

  18. Rapid and Reliable HPLC Method for the Determination of Vitamin ...

    African Journals Online (AJOL)

    Purpose: To develop and validate an accurate, sensitive and reproducible high performance liquid chromatographic (HPLC) method for the quantitation of vitamin C in pharmaceutical samples. Method: The drug and the standard were eluted from Superspher RP-18 (250 mm x 4.6 mm, 10ìm particle size) at 20 0C.

  19. Rapid, cost-effective liquid chromatograghic method for the ...

    African Journals Online (AJOL)

    The method is highly sensitive, with limit of detection of 1 ng/ml. The coefficient of variation for within-day run was less than 4% while that of day-to-day run was less than 6%. There were no interfering peaks from endogenous materials in the serum. The method was validated and used for pharmacokinetic studies ...

  20. A simple and rapid molecular method for Leptospira species identification

    NARCIS (Netherlands)

    Ahmed, Ahmed; Anthony, Richard M.; Hartskeerl, Rudy A.

    2010-01-01

    Serological and DNA-based classification systems only have little correlation. Currently serological and molecular methods for characterizing Leptospira are complex and costly restricting their world-wide distribution and use. Ligation mediated amplification combined with microarray analysis

  1. A method of rapid testing of radioactivity of different materials

    Directory of Open Access Journals (Sweden)

    Yu. Zabulonov

    2016-10-01

    Full Text Available A new method for the detection of low-level ionising radiation in solid, liquid or loose materials, which is based on the use of the Bayesian approach for the estimation of probabilistic parameters and a special statistical criterion, is offered in the present paper. We describe the algorithm and show the advantages of the method. The approach can be effective even in the case of extremely low signals whose intensity is much less than the background radiation.

  2. A rapid cloning method employing orthogonal end protection.

    Directory of Open Access Journals (Sweden)

    Arjen J Jakobi

    Full Text Available We describe a novel in vitro cloning strategy that combines standard tools in molecular biology with a basic protecting group concept to create a versatile framework for the rapid and seamless assembly of modular DNA building blocks into functional open reading frames. Analogous to chemical synthesis strategies, our assembly design yields idempotent composite synthons amenable to iterative and recursive split-and-pool reaction cycles. As an example, we illustrate the simplicity, versatility and efficiency of the approach by constructing an open reading frame composed of tandem arrays of a human fibronectin type III (FNIII domain and the von Willebrand Factor A2 domain (VWFA2, as well as chimeric (FNIII(n-VWFA2-(FNIII(n constructs. Although we primarily designed this strategy to accelerate assembly of repetitive constructs for single-molecule force spectroscopy, we anticipate that this approach is equally applicable to the reconstitution and modification of complex modular sequences including structural and functional analysis of multi-domain proteins, synthetic biology or the modular construction of episomal vectors.

  3. Rapid, specific and sensitive method for isoniazid determination in serum.

    Science.gov (United States)

    Sadeg, N; Pertat, N; Dutertre, H; Dumontet, M

    1996-01-12

    An original simple, specific and rapid high-performance liquid chromatographic assay for the determination of isoniazid (INH) in human serum is presented. The drug was extracted from the serum by protein precipitation with 30% (w/v) trichloroacetic acid, then the drug was reacted with the coupling reagent, trans-cinnamaldehyde, to form a derivative absorbing at 340 nm. A 20-microliters aliquot was injected into the chromatograph after neutralization with 1 M KOH solution. A liquid chromatograph equipped with a reversed-phase 30-microns C18 precolumn linked to a 4-microns C18 analytical column was used. The drug was eluted with a mixture of acetonitrile-water-triethylamine-acetic acid (400:600:2:1, v/v), pH value was 5 +/- 1. Flow-rate and wavelength were set at 1 ml/min and 340 nm, respectively. The extraction recoveries from human serum averaged 100% for INH at concentrations of 1, 2 and 4 mg/l. The coefficients of variation for three different concentrations for INH in serum in the within-day study varied between 1.2 and 3.5%, whereas those in the day-to-day study varied between 2.8 and 4.3%.

  4. Bioconversion of sugarcane biomass into ethanol: an overview about composition, pretreatment methods, detoxification of hydrolysates, enzymatic saccharification, and ethanol fermentation.

    Science.gov (United States)

    Canilha, Larissa; Kumar Chandel, Anuj; dos Santos Milessi, Thais Suzane; Fernandes Antunes, Felipe Antônio; da Costa Freitas, Wagner Luiz; das Graças Almeida Felipe, Maria; da Silva, Silvio Silvério

    2012-01-01

    Depleted supplies of fossil fuel, regular price hikes of gasoline, and environmental damage have necessitated the search for economic and eco-benign alternative of gasoline. Ethanol is produced from food/feed-based substrates (grains, sugars, and molasses), and its application as an energy source does not seem fit for long term due to the increasing fuel, food, feed, and other needs. These concerns have enforced to explore the alternative means of cost competitive and sustainable supply of biofuel. Sugarcane residues, sugarcane bagasse (SB), and straw (SS) could be the ideal feedstock for the second-generation (2G) ethanol production. These raw materials are rich in carbohydrates and renewable and do not compete with food/feed demands. However, the efficient bioconversion of SB/SS (efficient pretreatment technology, depolymerization of cellulose, and fermentation of released sugars) remains challenging to commercialize the cellulosic ethanol. Among the technological challenges, robust pretreatment and development of efficient bioconversion process (implicating suitable ethanol producing strains converting pentose and hexose sugars) have a key role to play. This paper aims to review the compositional profile of SB and SS, pretreatment methods of cane biomass, detoxification methods for the purification of hydrolysates, enzymatic hydrolysis, and the fermentation of released sugars for ethanol production.

  5. Bioconversion of Sugarcane Biomass into Ethanol: An Overview about Composition, Pretreatment Methods, Detoxification of Hydrolysates, Enzymatic Saccharification, and Ethanol Fermentation

    Directory of Open Access Journals (Sweden)

    Larissa Canilha

    2012-01-01

    Full Text Available Depleted supplies of fossil fuel, regular price hikes of gasoline, and environmental damage have necessitated the search for economic and eco-benign alternative of gasoline. Ethanol is produced from food/feed-based substrates (grains, sugars, and molasses, and its application as an energy source does not seem fit for long term due to the increasing fuel, food, feed, and other needs. These concerns have enforced to explore the alternative means of cost competitive and sustainable supply of biofuel. Sugarcane residues, sugarcane bagasse (SB, and straw (SS could be the ideal feedstock for the second-generation (2G ethanol production. These raw materials are rich in carbohydrates and renewable and do not compete with food/feed demands. However, the efficient bioconversion of SB/SS (efficient pretreatment technology, depolymerization of cellulose, and fermentation of released sugars remains challenging to commercialize the cellulosic ethanol. Among the technological challenges, robust pretreatment and development of efficient bioconversion process (implicating suitable ethanol producing strains converting pentose and hexose sugars have a key role to play. This paper aims to review the compositional profile of SB and SS, pretreatment methods of cane biomass, detoxification methods for the purification of hydrolysates, enzymatic hydrolysis, and the fermentation of released sugars for ethanol production.

  6. Asymptotic and Numerical Methods for Rapidly Rotating Buoyant Flow

    Science.gov (United States)

    Grooms, Ian G.

    This thesis documents three investigations carried out in pursuance of a doctoral degree in applied mathematics at the University of Colorado (Boulder). The first investigation concerns the properties of rotating Rayleigh-Benard convection -- thermal convection in a rotating infinite plane layer between two constant-temperature boundaries. It is noted that in certain parameter regimes convective Taylor columns appear which dominate the dynamics, and a semi-analytical model of these is presented. Investigation of the columns and of various other properties of the flow is ongoing. The second investigation concerns the interactions between planetary-scale and mesoscale dynamics in the oceans. Using multiple-scale asymptotics the possible connections between planetary geostrophic and quasigeostrophic dynamics are investigated, and three different systems of coupled equations are derived. Possible use of these equations in conjunction with the method of superparameterization, and extension of the asymptotic methods to the interactions between mesoscale and submesoscale dynamics is ongoing. The third investigation concerns the linear stability properties of semi-implicit methods for the numerical integration of ordinary differential equations, focusing in particular on the linear stability of IMEX (Implicit-Explicit) methods and exponential integrators applied to systems of ordinary differential equations arising in the numerical solution of spatially discretized nonlinear partial differential equations containing both dispersive and dissipative linear terms. While these investigations may seem unrelated at first glance, some reflection shows that they are in fact closely linked. The investigation of rotating convection makes use of single-space, multiple-time-scale asymptotics to deal with dynamics strongly constrained by rotation. Although the context of thermal convection in an infinite layer seems somewhat removed from large-scale ocean dynamics, the asymptotic

  7. Acetone-butanol-ethanol fermentation of corn stover: current production methods, economic viability and commercial use.

    Science.gov (United States)

    Baral, Nawa R; Slutzky, Lauren; Shah, Ajay; Ezeji, Thaddeus C; Cornish, Katrina; Christy, Ann

    2016-03-01

    Biobutanol is a next-generation liquid biofuel with properties akin to those of gasoline. There is a widespread effort to commercialize biobutanol production from agricultural residues, such as corn stover, which do not compete with human and animal foods. This pursuit is backed by extensive government mandates to expand alternative energy sources. This review provides an overview of research on biobutanol production using corn stover feedstock. Structural composition, pretreatment, sugar yield (following pretreatment and hydrolysis) and generation of lignocellulose-derived microbial inhibitory compounds (LDMICs) from corn stover are discussed. The review also discusses different Clostridium species and strains employed for biobutanol production from corn stover-derived sugars with respect to solvent yields, tolerance to LDMICs and in situ solvent recovery (integrated fermentation). Further, the economics of cellulosic biobutanol production are highlighted and compared to corn starch-derived ethanol and gasoline. As discussed herein, the economic competitiveness of biobutanol production from corn stover largely depends on feedstock processing and fermentation process design. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  8. Ethanol fermentation

    Energy Technology Data Exchange (ETDEWEB)

    1981-01-01

    The inulin of chicory slices was hydrolyzed enzymically and fermented to ethanol. Maximum ethanol yield was achieved with fermentation combined with saccharification, using cellulase and inulinase for saccharification. The fermenting organism was Saccharomyces cerevisiae. Kluyveromyces fragilis, containing endogenous inulinase, was also used, but with lower yield.

  9. Rapid, cost-effective liquid chromatograghic method for the ...

    African Journals Online (AJOL)

    GRACE

    2006-07-03

    Jul 3, 2006 ... Akay C, Ozkan SA, Senturk Z, Cevheroglu S (2002). Simultaneous determination of metronidazole and miconazole in pharmaceutical dosage form by HPLC. Farmaco. Nov.57(11): 953-7. Galmier MJ, Frasey AM, Bastide M, Beyssac E, Petit J, Aiache JM,. Lartigue-Mattei (1998). Simple and sensitive method ...

  10. RESEARCH NOTE A Universal, rapid, and inexpensive method for ...

    Indian Academy of Sciences (India)

    Navya

    very satisfactory for many researchers to prepare reagents for “all in one” ready to use method to extract gDNA from very wide range sources of blood samples. To meet these criteria, a universal and versatile DNA extraction procedure should be developedwith a minimal chemicals and equipment.On the other hand, the ...

  11. Rapid prototyping methods for the manufacture of fuel cells

    Directory of Open Access Journals (Sweden)

    Dudek Piotr

    2016-01-01

    The potential for the application of this method for the manufacture of metallic bipolar plates (BPP for use in proton exchange membrane fuel cells (PEMFCs is presented and discussed. Special attention is paid to the fabrication of light elements for the construction of PEMFC stacks designed for mobile applications such as aviation technology and unmanned aerial vehicles (UAVs.

  12. [Methods for the rapid preparation of paraffin blocks].

    Science.gov (United States)

    Shmurun, R I

    1992-01-01

    Two accelerated chloroform-paraffin processings of materials with the use of ultrasound (US) and microwave (MW) irradiation in the stove "Electronica" as well as a combined method with US- and MW-irradiation are proposed to shorten drastically the duration of the prehistologic processing.

  13. Rapid multi-residue method for the determination of pesticide ...

    African Journals Online (AJOL)

    Exposure to pesticides can represent a potential risk to humans. Agricultural workers are at risk of chronic toxicity. Hence, the evaluation of pesticide residues in their blood gives an indication about the extent of exposure and help in assessing adverse health effects. The aim of our study was to develop analytical method for ...

  14. Using highly efficient nonlinear experimental design methods for optimization of Lactococcus lactis fermentation in chemically defined media.

    Science.gov (United States)

    Zhang, Guiying; Block, David E

    2009-01-01

    Optimization of fermentation media and processes is a difficult task due to the potential for high dimensionality and nonlinearity. Here we develop and evaluate variations on two novel and highly efficient methods for experimental fermentation optimization. The first approach is based on using a truncated genetic algorithm with a developing neural network model to choose the best experiments to run. The second approach uses information theory, along with Bayesian regularized neural network models, for experiment selection. To evaluate these methods experimentally, we used them to develop a new chemically defined medium for Lactococcus lactis IL1403, along with an optimal temperature and initial pH, to achieve maximum cell growth. The media consisted of 19 defined components or groups of components. The optimization results show that the maximum cell growth from the optimal process of each novel method is generally comparable to or higher than that achieved using a traditional statistical experimental design method, but these optima are reached in about half of the experiments (73-94 vs. 161, depending on the variants of methods). The optimal chemically defined media developed in this work are rich media that can support high cell density growth 3.5-4 times higher than the best reported synthetic medium and 72% higher than a commonly used complex medium (M17) at optimization scale. The best chemically defined medium found using the method was evaluated and compared with other defined or complex media at flask- and fermentor-scales. (c) 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009.

  15. Time evolution of the wave equation using rapid expansion method

    KAUST Repository

    Pestana, Reynam C.

    2010-07-01

    Forward modeling of seismic data and reverse time migration are based on the time evolution of wavefields. For the case of spatially varying velocity, we have worked on two approaches to evaluate the time evolution of seismic wavefields. An exact solution for the constant-velocity acoustic wave equation can be used to simulate the pressure response at any time. For a spatially varying velocity, a one-step method can be developed where no intermediate time responses are required. Using this approach, we have solved for the pressure response at intermediate times and have developed a recursive solution. The solution has a very high degree of accuracy and can be reduced to various finite-difference time-derivative methods, depending on the approximations used. Although the two approaches are closely related, each has advantages, depending on the problem being solved. © 2010 Society of Exploration Geophysicists.

  16. A taxonomy of rapid reviews links report types and methods to specific decision-making contexts.

    Science.gov (United States)

    Hartling, Lisa; Guise, Jeanne-Marie; Kato, Elisabeth; Anderson, Johanna; Belinson, Suzanne; Berliner, Elise; Dryden, Donna M; Featherstone, Robin; Mitchell, Matthew D; Motu'apuaka, Makalapua; Noorani, Hussein; Paynter, Robin; Robinson, Karen A; Schoelles, Karen; Umscheid, Craig A; Whitlock, Evelyn

    2015-12-01

    Describe characteristics of rapid reviews and examine the impact of methodological variations on their reliability and validity. We conducted a literature review and interviews with organizations that produce rapid reviews or related products to identify methods, guidance, empiric evidence, and current practices. We identified 36 rapid products from 20 organizations (production time, 5 minutes to 8 months). Methods differed from systematic reviews at all stages. As time frames increased, methods became more rigorous; however, restrictions on database searching, inclusion criteria, data extracted, and independent dual review remained. We categorized rapid products based on extent of synthesis. "Inventories" list what evidence is available. "Rapid responses" present best available evidence with no formal synthesis. "Rapid reviews" synthesize the quality of and findings from the evidence. "Automated approaches" generate meta-analyses in response to user-defined queries. Rapid products rely on a close relationship with end users and support specific decisions in an identified time frame. Limited empiric evidence exists comparing rapid and systematic reviews. Rapid products have tremendous methodological variation; categorization based on time frame or type of synthesis reveals patterns. The similarity across rapid products lies in the close relationship with the end user to meet time-sensitive decision-making needs. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. Systems and methods for rapid processing and storage of data

    Science.gov (United States)

    Stalzer, Mark A.

    2017-01-24

    Systems and methods of building massively parallel computing systems using low power computing complexes in accordance with embodiments of the invention are disclosed. A massively parallel computing system in accordance with one embodiment of the invention includes at least one Solid State Blade configured to communicate via a high performance network fabric. In addition, each Solid State Blade includes a processor configured to communicate with a plurality of low power computing complexes interconnected by a router, and each low power computing complex includes at least one general processing core, an accelerator, an I/O interface, and cache memory and is configured to communicate with non-volatile solid state memory.

  18. Selection of an Effective Indicator for Rapid Detection of Microorganisms Producing γ-Polyglutamic Acid and Its Biosynthesis Under Submerged Fermentation Conditions Using Bacillus methylotrophicus.

    Science.gov (United States)

    Chatterjee, Poonam Mishra; Datta, Silpi; Tiwari, Deepika Pandey; Raval, Ritu; Dubey, Ashok Kumar

    2017-11-13

    γ-Polyglutamic acid (γ-PGA) is a biosynthetic outcome of glutamic acid polymerization by microbes. In the current study, we have isolated Bacillus methylotrophicus on solid differential media containing methylene blue. This is the first report mentioning the use of methylene blue to distinguish the monomeric and polymeric form of glutamic acid in the liquid medium using UV-Vis spectrophotometer. Our method can simplify the analytical process of γ-PGA confirmation using the aforementioned studies. This screening protocol is sensitive to the detection of γ-PGA quantities as low as 3 μg/mL; thus, the potent producers can be effectively screened. Furthermore, we have carried out process optimization of the present strain for γ-PGA production wherein we could obtain 1.4-fold improvement in the yield with respect to utilization of carbon source and 2.6-fold increase with respect to nitrogen source under submerged fermentation at a shake flask level. We have shown an increase in γ-PGA titer from 1.5 to 36 g/L using mannitol, monosodium glutamate, peptone, and tween 20.

  19. Rapid new methods for paint collection and lead extraction.

    Science.gov (United States)

    Gutknecht, William F; Harper, Sharon L; Winstead, Wayne; Sorrell, Kristen; Binstock, David A; Salmons, Cynthia A; Haas, Curtis; McCombs, Michelle; Studabaker, William; Wall, Constance V; Moore, Curtis

    2009-01-01

    Chronic exposure of children to lead can result in permanent physiological impairment. In adults, it can cause irritability, poor muscle coordination, and nerve damage to the sense organs and nerves controlling the body. Surfaces coated with lead-containing paints are potential sources of exposure to lead. In April 2008, the U.S. Environmental Protection Agency (EPA) finalized new requirements that would reduce exposure to lead hazards created by renovation, repair, and painting activities, which disturb lead-based paint. On-site, inexpensive identification of lead-based paint is required. Two steps have been taken to meet this challenge. First, this paper presents a new, highly efficient method for paint collection that is based on the use of a modified wood drill bit. Second, this paper presents a novel, one-step approach for quantitatively grinding and extracting lead from paint samples for subsequent lead determination. This latter method is based on the use of a high-revolutions per minute rotor with stator to break up the paint into approximately 50 micron-size particles. Nitric acid (25%, v/v) is used to extract the lead in 95% for real-world paints, National Institute of Standards and Technology's standard reference materials, and audit samples from the American Industrial Hygiene Association's Environmental Lead Proficiency Analytical Testing Program. This quantitative extraction procedure, when paired with quantitative paint sample collection and lead determination, may enable the development of a lead paint test kit that will meet the specifications of the final EPA rule.

  20. Comparison of Pretreatment Methods on Vetiver Leaves for Efficient Processes of Simultaneous Saccharification and Fermentation by Neurospora sp.

    Science.gov (United States)

    Restiawaty, E.; Dewi, A.

    2017-07-01

    Lignocellulosic biomass is a potential raw material for bioethanol production. Neurospora sp. can be used to convert lignocellulosic biomass into bioethanol because of its ability to perform simultaneous saccharification and fermentation. However, lignin content, degree of polymerization, and crystallinity of cellulose contained in lignocellulosic biomass can inhibit cellulosic-biomass digestion by Neurospora sp, so that a suitable pretreatment method of lignocellulosic biomass is needed. The focus of this research was to investigate the suitable pretreatment method for vetiver leaves (Vetiveria zizanioides L. Nash) used as a raw material producing bioethanol in the process of simultaneous saccharification and fermentation (SSF) by Neurospora sp.. Vetiver plants obtained from Garut are deliberately cultivated to produce essential oils extracted from the roots of this plant. Since the vetiver leaves do not contain oil, some of harvested leaves are usually used for crafts and cattle feed, and the rest are burned. This study intended to look at other potential of vetiver leaves as a source of renewable energy. Pretreatments of the vetiver leaves were conducted using hot water, dilute acid, alkaline & dilute acid, and alkaline peroxide, in which each method was accompanied by thermal treatment. The results showed that the alkaline peroxide treatment is a suitable for vetiver leaves as indicated by the increase of cellulose content up to 65.1%, while the contents of hot water soluble, hemicellulose, lignin, and ash are 8.7%, 18.3%, 6.8%, and 1.1%, respectively. Using this pretreatment method, the vetiver leaves can be converted into bioethanol by SSF process using Neurospora sp. with a concentration of bioethanol of 6.7 g/L operated at room temperature.

  1. Susceptibility testing of filamentous fungi to amphotericin B by a rapid radiometric method

    Energy Technology Data Exchange (ETDEWEB)

    Merz, W.G.; Fay, D.; Thumar, B.; Dixon, D.

    1984-01-01

    A rapid, radiometric method was developed to determine the susceptibility of filamentous fungi to amphotericin B. The rapid, radiometric method depended on measurement of the inhibition of /sup 24/CO/sub 2/ production in the presence of amphotericin B. Thirty isolates of filamentous fungi were tested by the rapid, radiometric method and a reference agar dilution method. There was 93% agreement between the two methods when an 80% or greater decrease in CO/sub 2/ production was used to calculate the minimal inhibitory concentration with the rapid, radiometric method. Minimal inhibitory concentrations, based on 80% decrease of CO/sub 2/ production, were achieved within 24 h of incubation with all of the fungi tested.

  2. Microwave as a rapid cooking method for beef tenderness evaluation.

    Science.gov (United States)

    Silva, Douglas R G; Fernandez, Ludimila C; Torres Filho, Robledo A; Fontes, Paulo R; Ramos, Alcinéia L S; Ramos, Eduardo M

    2017-11-20

    Semitendinosus (ST) muscle steaks were grouped according to three locations (proximal, middle, and distal end), grilled to endpoint temperature of 71C or cooked for 20, 30, 40, 50, or 60 s in a microwave oven (Mw). The location did not affect (p > .05) the cooking loss (CL) or shear force (SF) values. The CL increased (p  .05) from the grill samples. None of the microwaves' SF values were different (p > .05) from the grill values, with treatments Mw30 to Mw50 showing moderate repeatability (R = 0.51-0.60) and Mw30 and Mw60 showing higher correlations (r > .71) with grill values. Cooking beef strips with a microwave is a potential method for tenderness evaluation, but requires additional study to evaluate and optimize this application in different muscles and for comparison to sensorial data. The work was intended to evaluate the possibility of using a microwave oven for cooking meat to be used in objective measurement protocols for meat tenderness and to optimize the conditions for this purpose. The use of a standardized microwave procedure allows a dramatic reduction in analysis time and may reduce error variance due to nonuniform cooking procedures. © 2017 Wiley Periodicals, Inc.

  3. A method for rapid abundance estimation of semiplanktonic meiofauna

    Science.gov (United States)

    Armonies, Werner

    2000-12-01

    Many meiofaunal copepods and plathelminths enter the tidal waters at night thus exhibiting a life-style intermediate between benthic and planktonic. At the same time, ostracods may leave their interstitial dwelling and move across the sediment surface. In laboratory experiments, the percentage of plathelminth populations emerging from the sediment varied with the species, temperature, light conditions, and the dimensions of the sediment cores studied, but not with tidal level, season, ambient density of conspecifics, or the sediment composition. Therefore, the swimming activity may be utilised for extraction of semiplanktonic meiofauna provided that the extraction procedure is standardised with respect to temperature, light and core size. For free-living plathelminths from the Wadden Sea intertidal a robust standard procedure is as follows: sediment cores 1.6 cm in diameter (2 cm2 surface area) and 3 cm deep are fitted into cylindrical containers and submerged into aquaria containing filtered seawater (ambient salinity, room temperature, darkness) for 24 h. The sediment containers are then removed and the aquarian water filtered through appropriate meshes; the residue contains the emergent faunal component. For plathelminths, this procedure reduces sorting time by some 90% compared with the standard shaking-decantation method and thus makes it possible to process a high number of samples in a short time. Similar procedures may be developed for copepods and epibenthic ostracods.

  4. Rapid methods for the detection of foodborne bacterial pathogens: principles, applications, advantages and limitations

    Science.gov (United States)

    Law, Jodi Woan-Fei; Ab Mutalib, Nurul-Syakima; Chan, Kok-Gan; Lee, Learn-Han

    2015-01-01

    The incidence of foodborne diseases has increased over the years and resulted in major public health problem globally. Foodborne pathogens can be found in various foods and it is important to detect foodborne pathogens to provide safe food supply and to prevent foodborne diseases. The conventional methods used to detect foodborne pathogen are time consuming and laborious. Hence, a variety of methods have been developed for rapid detection of foodborne pathogens as it is required in many food analyses. Rapid detection methods can be categorized into nucleic acid-based, biosensor-based and immunological-based methods. This review emphasizes on the principles and application of recent rapid methods for the detection of foodborne bacterial pathogens. Detection methods included are simple polymerase chain reaction (PCR), multiplex PCR, real-time PCR, nucleic acid sequence-based amplification (NASBA), loop-mediated isothermal amplification (LAMP) and oligonucleotide DNA microarray which classified as nucleic acid-based methods; optical, electrochemical and mass-based biosensors which classified as biosensor-based methods; enzyme-linked immunosorbent assay (ELISA) and lateral flow immunoassay which classified as immunological-based methods. In general, rapid detection methods are generally time-efficient, sensitive, specific and labor-saving. The developments of rapid detection methods are vital in prevention and treatment of foodborne diseases. PMID:25628612

  5. Rapid Methods for the Detection of Foodborne Bacterial Pathogens: Principles, Applications, Advantages and Limitations

    Directory of Open Access Journals (Sweden)

    Law eJodi Woan-Fei

    2015-01-01

    Full Text Available The incidence of foodborne diseases has increased over the years and resulted in major public health problem globally. Foodborne pathogens can be found in various foods and it is important to detect foodborne pathogens to provide safe food supply and to prevent foodborne diseases. The conventional methods used to detect foodborne pathogen are time consuming and laborious. Hence, a variety of methods have been developed for rapid detection of foodborne pathogens as it is required in many food analyses. Rapid detection methods can be categorized into nucleic acid-based, biosensor-based and immunological-based methods. This review emphasizes on the principles and application of recent rapid methods for the detection of foodborne bacterial pathogens. Detection methods included are simple polymerase chain reaction (PCR, multiplex PCR, real-time PCR, nucleic acid sequence-based amplification (NASBA, loop-mediated isothermal amplification (LAMP and oligonucleotide DNA microarray which classified as nucleic acid-based methods; optical, electrochemical and mass-based biosensors which classified as biosensor-based methods; enzyme-linked immunosorbent assay (ELISA and lateral flow immunoassay which classified as immunological-based methods. In general, rapid detection methods are generally time-efficient, sensitive, specific and labor-saving. The developments of rapid detection methods are vital in prevention and treatment of foodborne diseases.

  6. Free nitrous acid serving as a pretreatment method for alkaline fermentation to enhance short-chain fatty acid production from waste activated sludge.

    Science.gov (United States)

    Zhao, Jianwei; Wang, Dongbo; Li, Xiaoming; Yang, Qi; Chen, Hongbo; Zhong, Yu; Zeng, Guangming

    2015-07-01

    Alkaline condition (especially pH 10) has been demonstrated to be a promising method for short-chain fatty acid (SCFA) production from waste activated sludge anaerobic fermentation, because it can effectively inhibit the activities of methanogens. However, due to the limit of sludge solubilization rate, long fermentation time is required but SCFA yield is still limited. This paper reports a new pretreatment method for alkaline fermentation, i.e., using free nitrous acid (FNA) to pretreat sludge for 2 d, by which the fermentation time is remarkably shortened and meanwhile the SCFA production is significantly enhanced. Experimental results showed the highest SCFA production of 370.1 mg COD/g VSS (volatile suspended solids) was achieved at 1.54 mg FNA/L pretreatment integration with 2 d of pH 10 fermentation, which was 4.7- and 1.5-fold of that in the blank (uncontrolled) and sole pH 10 systems, respectively. The total time of this integration system was only 4 d, whereas the corresponding time was 15 d in the blank and 8 d in the sole pH 10 systems. The mechanism study showed that compared with pH 10, FNA pretreatment accelerated disruption of both extracellular polymeric substances and cell envelope. After FNA pretreatment, pH 10 treatment (1 d) caused 38.0% higher substrate solubilization than the sole FNA, which indicated that FNA integration with pH 10 could cause positive synergy on sludge solubilization. It was also observed that this integration method benefited hydrolysis and acidification processes. Therefore, more SCFA was produced, but less fermentation time was required in the integrated system. Copyright © 2015 Elsevier Ltd. All rights reserved.

  7. Response surface method optimization of ectoine fermentation medium with moderate halophilic bacteria Halomonas sp. H02

    Science.gov (United States)

    Li, T. T.; Qu, A.; Yuan, X. N.; Tan, F. X.; Li, X. W.; Wang, T.; Zhang, L. H.

    2017-07-01

    Moderate halophilic bacteria are of halophilic bacteria whose suitable growth of NaCl is 5-10%. When the moderate halophilic bacteria response to high osmotic stress, the intracellular will synthesize small organic molecule compatible solutes. Ectoine, which is the major synthetic osmotic compatible solutes for moderate halophilic bacteria, can help microbial enzymes, nucleic acids and the whole cell resist to hypertonic, high temperature, freezing and other inverse environment. In order to increase the Ectoine production of Moderate halophilic bacteria Halomonas sp. H02, the Ectoine fermentation medium component was optimized by Plackett-Burman (PB) and Response Surface Methodology (RSM) based on the principle of non-complete equilibrium The results of PB experiments showed that the three main influencing factors of Moderate halophilic bacteria Halomonas sp. H02 synthesis Ectoine culture medium were C5H8NNaO4 concentration, NaCl concentration and initial pH. According to the center point of the steepest climbing experiment, the central combination design experiment was used to show that the model is consistent with the actual situation. The optimum combination of three influencing factors were C5H8NNaO4 41 g/L, NaCl 87.2 g/L and initial pH 5.9, and the predicted amount of Ectoine was 1835.8 mg/L, increased by 41.6%.

  8. Characterizing Soy Sauce Moromi Manufactured by High-Salt Dilute-State and Low-Salt Solid-State Fermentation Using Multiphase Analyzing Methods.

    Science.gov (United States)

    Zhang, Liqiang; Zhou, Rongqing; Cui, Ruiying; Huang, Jun; Wu, Chongde

    2016-10-14

    Present study was to characterize the physiochemical properties, free amino acids (FAAs), volatiles and microbial communities of various moromi, respectively sampled from different stages of high-salt dilute-state (HSDS) and low-salt solid-state (LSSS) fermentation, using multiphase analyzing methods. Phospholipid fatty acids (PLFA) analysis indicated that Gram-positive bacteria were dominant bacteria and fungi were principal microbes. For DGGE analysis, dominant microbes in moromi were mainly fell into Weissella, Tetragenococcus, Candida, Pichia, and Zygosaccharomyces. During fermentation, the dominant microbes shifted from nonhalophilic and less acid-tolerant species to halophilic and acid-tolerant species. Total of 15 FAAs and 44 volatiles were identified in moromi, mainly Glu, Asp, Tyr, and acids, alcohols, esters, aldehydes, respectively. Odor activity values analysis suggested that the final moromi of LSSS fermentation had more complicated odors than that of HSDS fermentation. Conclusively, technological parameters, microbial communities, raw materials and fermentation process may result in the discrepancy of HSDS and LSSS moromi. © 2016 Institute of Food Technologists®.

  9. Methods and Magnitudes of Rapid Weight Loss in Judo Athletes Over Pre-Competition Periods

    Directory of Open Access Journals (Sweden)

    Kons Rafael Lima

    2017-06-01

    Full Text Available Purpose. The study aimed to analyse the methods and magnitudes of rapid weight loss (RWL in judo team members in distinct periods before the biggest state competition in Southern Brazil.

  10. Shifts in microbial populations in Rusitec fermenters as affected by the type of diet and impact of the method for estimating microbial growth (15N v. microbial DNA).

    Science.gov (United States)

    Mateos, I; Ranilla, M J; Saro, C; Carro, M D

    2017-11-01

    offered similar results for diets comparison, but both methods presented contrasting results for microbial growth in SOL and LIQ phases. The study showed that fermentation parameters remained fairly stable over the commonly used sampling period (days 8 to 14), but shifts in microbial populations were detected. Moreover, microbial populations differed markedly from those in the inocula, which indicates the difficulty of directly transposing results on microbial populations developed in Rusitec fermenters to in vivo conditions.

  11. Development of a rapid and sensitive HPLC method for the identification and quantification of cavoxin and cavoxone in Phoma cava culture filtrates.

    Science.gov (United States)

    Masi, Marco; Moeini, Seyed Arash; Boari, Angela; Cimmino, Alessio; Vurro, Maurizio; Evidente, Antonio

    2017-10-23

    Cavoxin is a tetrasubstituted phytotoxic chalcone and cavoxone is the corresponding chroman-4-one, both produced in vitro by Phoma cava, a fungus isolated from chestnut. Cavoxin showed biofungicide potential against fungal species responsible for food moulding. Therefore, cavoxin has potential to be incorporated into biopolymer to generate 'intelligent food packaging'. To reach this objective, large-scale production of cavoxin by P. cava fermentation needs to be optimized. A rapid and efficient method for cavoxin analysis, as well as of cavoxone, in the fungal culture filtrates and the corresponding organic extracts is the first experimental step. Thus, a HPLC method was developed and applied to quantify cavoxin and cavoxone production in two different fungal culture conditions. The analysis proved that cavoxin production in stirred culture filtrates is significantly higher than in static ones.

  12. Rapid identification of salmonella serotypes with stereo and hyperspectral microscope imaging Methods

    Science.gov (United States)

    The hyperspectral microscope imaging (HMI) method can reduce detection time within 8 hours including incubation process. The early and rapid detection with this method in conjunction with the high throughput capabilities makes HMI method a prime candidate for implementation for the food industry. Th...

  13. Optimization of fermentation medium for acetoin production by Bacillus subtilis SF4-3 using statistical methods.

    Science.gov (United States)

    Tian, Yanjun; Fan, Yixiao; Zhao, Xiangying; Zhang, Jiaxiang; Yang, Liping; Liu, Jianjun

    2014-01-01

    To improve the acetoin-producing ability of Bacillus subtilis SF4-3, isolated from "natto," a Japanese traditional food, the fermentation medium was optimized in shake-flask fermentation by statistically designed methods. Based on results of the single-factor experiment, orthogonal experiment, and Plackett-Burman design, yeast extract, corn steep liquor, and urea were identified as showing significant influence on the acetoin production. Subsequently, the optimum combination of the three factors was investigated by the Box-Behnken design (BBD) of response surface methodology (RSM) in order to further enhance the acetoin production. The maximum acetoin yield of 45.4 g/L was predicted when the concentrations of yeast extract, corn steep liquor, and urea were 8.5 g/L, 14.6 g/L, and 3.8 g/L, respectively. The results were further confirmed in triplicate experiments using the optimized medium (glucose 160 g/L, yeast extract 8.5 g/L, corn steep liquor 14.6 g/L, urea 3.8 g/L, manganese sulfate 0.05 g/L, ferrous sulfate 0.05 g/L), and an acetoin yield of 46.2 g/L was obtained in the validation experiment, which was in agreement with the prediction. After the optimization of medium components, an increase of 36.28% in acetoin production was achieved in comparison to that at the initial medium levels.

  14. Bacterial Ecology of Fermented Cucumber Rising pH Spoilage as Determined by Nonculture-Based Methods.

    Science.gov (United States)

    Medina, Eduardo; Pérez-Díaz, Ilenys M; Breidt, Fred; Hayes, Janet; Franco, Wendy; Butz, Natasha; Azcarate-Peril, María Andrea

    2016-01-01

    Fermented cucumber spoilage (FCS) characterized by rising pH and the appearance of manure- and cheese-like aromas is a challenge of significant economical impact for the pickling industry. Previous culture-based studies identified the yeasts Pichia manshurica and Issatchenkia occidentalis, 4 Gram-positive bacteria, Lactobacillus buchneri, Lactobacillus parrafaraginis, Clostridium sp., and Propionibacterium and 1 Gram-negative genus, Pectinatus, as relevant in various stages of FCS given their ability to metabolize lactic acid. It was the objective of this study to augment the current knowledge of FCS using culture-independent methods to microbiologically characterize commercial spoilage samples. Ion Torrent data and 16S rRNA cloning library analyses of samples collected from commercial fermentation tanks confirmed the presence of L. rapi and L. buchneri and revealed the presence of additional species involved in the development of FCS such as Lactobacillus namurensis, Lactobacillus acetotolerans, Lactobacillus panis, Acetobacter peroxydans, Acetobacter aceti, and Acetobacter pasteurianus at pH below 3.4. The culture-independent analyses also revealed the presence of species of Veillonella and Dialister in spoilage samples with pH above 4.0 and confirmed the presence of Pectinatus spp. during lactic acid degradation at the higher pH. Acetobacter spp. were successfully isolated from commercial samples collected from tanks subjected to air purging by plating on Mannitol Yeast Peptone agar. In contrast, Lactobacillus spp. were primarily identified in samples of FCS collected from tanks not subjected to air purging for more than 4 mo. Thus, it is speculated that oxygen availability may be a determining factor in the initiation of spoilage and the leading microbiota. Published 2015. This article is a U.S. Government work and is in the public domain in the USA.

  15. Assessment of three rapid methods for the detection of methicillin-resistant Staphylococcus aureus.

    Science.gov (United States)

    Soares, Maria João; Soares, Carlos; Mendes, Ana Constança; Guimarães, Maria Luís; Cabeda, José Manuel; Amorim, José Manuel

    2004-01-01

    We evaluated three rapid methods to detect methicillin-resistant Staphylococcus aureus (MRSA) and compared them with PCR amplification of mecA. A total of 103 S. aureus strains were studied by MRSA-Screen, BBL Crystal, Velogene Genomic and mecA PCR. All the methods detected the 61 MRSA strains having the mecA gene, showing 100% sensitivity and specificity. Despite the correlation between all the rapid methods and PCR, the ease of use and shorter turnaround time of MRSA-Screen were important factors leading to the selection of this method as the routine screening technique for MRSA.

  16. Investigating the fermentation of cocoa by correlating denaturing gradient gel electrophoresis profiles and near infrared spectra

    DEFF Research Database (Denmark)

    Nielsen, Dennis Sandris; Snitkjær, Pia; van der Berg, Franciscus Winfried J

    2008-01-01

    Raw cocoa has an astringent, unpleasant taste and flavour, and has to be fermented, dried and roasted in order to obtain the characteristic cocoa flavour and taste. During the fermentation microbial activity outside the cocoa beans induces biochemical and physical changes inside the beans...... of the beans and the chemical processes inside the beans have been carried out previously. Recently it has been shown that Denaturing Gradient Gel Electrophoresis (DGGE) offers an efficient tool for monitoring the microbiological changes taking place during the fermentation of cocoa. Near Infrared (NIR......) spectroscopy has previously been used to determine various components in cocoa beans, offering a rapid alternative compared to traditional analytical methods for obtaining knowledge about changes in the chemical composition of the cocoa beans during fermentation. During a number of cocoa fermentations bean...

  17. Butanol fermentation.

    Science.gov (United States)

    Schiel-Bengelsdorf, Bettina; Montoya, José; Linder, Sonja; Dürre, Peter

    2013-01-01

    This review provides an overview on bacterial butanol production and recent developments concerning strain improvement, newly built butanol production plants, and the importance of alternative substrates, especially lignocellulosic hydrolysates. The butanol fermentation using solventogenic clostridial strains, particularly Clostridium acetobutylicum, is a very old industrial process (acetone-butanol-ethanol-ABE fermentation). The genome of this organism has been sequenced and analysed, leading to important improvements in rational strain construction. As the traditional ABE fermentation process is economically unfavourable, novel butanol production strains are being developed. In this review, some newly engineered solvent-producing Clostridium strains are described and strains of which sequences are available are compared with C. acetobutylicum. Furthermore, the past and present of commercial butanol fermentation are presented, including active plants and companies. Finally, the use of biomass as substrate for butanol production is discussed. Some advances concerning processing of biomass in a biorefinery are highlighted, which would allow lowering the price of the butanol fermentation process at industrial scale.

  18. Development of a HPLC-UV method for the quantitative determination of four short-chain fatty acids and lactic acid produced by intestinal bacteria during in vitro fermentation.

    Science.gov (United States)

    De Baere, S; Eeckhaut, V; Steppe, M; De Maesschalck, C; De Backer, P; Van Immerseel, F; Croubels, S

    2013-06-01

    A rapid and sensitive HPLC-UV method for the quantitative determination of four short-chain fatty acids (SCFAs) and lactic acid (LA) produced during in vitro fermentation is presented. Extraction of SCFAs from supernatants of bacterial cultures is aggravated due to their polarity and volatility. Detection can only be performed at a short, non-selective UV wavelength (210nm), due to the lack of any significant chromophore. Therefore special attention was paid to the optimization of the sample preparation procedure and the HPLC-UV conditions. The final extraction procedure consisted of a liquid-liquid back extraction using diethylether. Prior to HPLC-UV analysis the samples were acidified (pHacid, aiming to select for butyric acid-producing bacteria. In addition, the method has been used to determine the production pattern of selected fatty acids by bacterial species isolated from human feces and chicken caeca. Copyright © 2013 Elsevier B.V. All rights reserved.

  19. Monitoring of changes in lactic acid bacteria during production of Thai traditional fermented shrimp (Kung-Som by culturing method and PCR-DGGE technique

    Directory of Open Access Journals (Sweden)

    Kanokwan Thongruck

    2017-02-01

    Full Text Available The lactic acid bacteria (LAB ecology of Kung-Som, a traditional Thai fermented shrimp, was investigated using culture-dependent and culture-independent methods. Kung-Som was fermented at room temperature under anaerobic condition for 7 days using autochthonous fermentation. The viable counts revealed a dominance of LAB, from the 16S rRNA gene V6-V8 sequence analysis of the isolates, Enterococcus faecalis, Enterococcus sanguinicola, Weissella cibaria, Weissella confusa, Enterococcus sp., Leuconostoc pseudomesenteroides and Lactobacillus plantarum were observed. The total microbial community was profiled without cultivation by analyzing the DNA that was directly extracted from the Kung-Som samples. The 16S rRNA gene V6-V8 regions were used as targets in the denaturing gradient gel electrophoresis (DGGE, profiling of the LAB. Pediococcus argentinicus, Lactococcus lactis subsp. lactis, Lactococcus garvieae, Lactobacillus curvatus, Lactobacillus sakei and Lact. plantarum were observed. Our results provide evidence of the necessity to combine the two methods for better description of microbial communities in Kung-Som fermentation.

  20. The scope of application of incremental rapid prototyping methods in foundry engineering

    Directory of Open Access Journals (Sweden)

    M. Stankiewicz

    2010-01-01

    Full Text Available The article presents the scope of application of selected incremental Rapid Prototyping methods in the process of manufacturing casting models, casting moulds and casts. The Rapid Prototyping methods (SL, SLA, FDM, 3DP, JS are predominantly used for the production of models and model sets for casting moulds. The Rapid Tooling methods, such as: ZCast-3DP, ProMetalRCT and VoxelJet, enable the fabrication of casting moulds in the incremental process. The application of the RP methods in cast production makes it possible to speed up the prototype preparation process. This is particularly vital to elements of complex shapes. The time required for the manufacture of the model, the mould and the cast proper may vary from a few to several dozen hours.

  1. Evaluation of two methods of rapid blood-glucose monitoring by unskilled personnel during surgery

    DEFF Research Database (Denmark)

    Madsbad, S; Adelhøj, B; Bigler, Dennis Richard

    1984-01-01

    The accuracy of two rapid methods of blood-glucose monitoring without (Haemo-glucotest 1-44) and with a reflectance meter (Hypocount B) was compared using a laboratory method. The assessment was carried out by personnel with no previous experience in measuring blood glucose. Eighty-five percent o...

  2. A rapid and convenient method for preparing salt-free (. gamma. -/sup 32/P)ATP

    Energy Technology Data Exchange (ETDEWEB)

    Palmer, J.L.; Avruch, J.

    1981-09-15

    (..gamma..-/sup 32/P)ATP is prepared by an existing enzymatic method that yields approximately 95% incorporation of /sup 32/P into ATP. A rapid and convenient method for purifying the (..gamma..-/sup 32/P)ATP which results in a product free of both salt and buffer is reported.

  3. High performance liquid chromatography method for rapid and accurate determination of homocysteine in plasma and serum

    DEFF Research Database (Denmark)

    Vester, Birte; Rasmussen, K

    1991-01-01

    Determination of homocysteine in plasma or serum for evaluation of cobalamin and folate deficiency is becoming an important diagnostic procedure. Accurate, rapid and low cost methods for measuring homocysteine are therefore required. We have improved an HPLC method and made it suitable for clinical...

  4. A rapid method to determine sterol, erythrodiol, and uvaol concentrations in olive oil.

    Science.gov (United States)

    Mathison, Brian; Holstege, Dirk

    2013-05-15

    A rapid, accurate, and efficient method for determining the sterol, uvaol, and erythrodiol concentrations was developed to meet International Olive Council (IOC) certification criteria for extra virgin olive oil (EVOO). The unsaponifiable fraction of the sample (0.2 g) was separated with a diatomaceous earth column, and the sterol and triterpenic dialcohols were isolated with a novel base-activated silica solid-phase extraction (SPE) cartridge cleanup protocol. The improved method and the IOC method provided identical pass/fail results (n = 34) for each of the six sterol and erythrodiol/uvaol IOC criteria used to assess olive oil. This method was validated, and recoveries of stigmasterol (88%) and β-sitosterol (84%) were greater than previously published values obtained using the IOC method. This method requires approximately one-third the time required to complete the IOC method and has great utility for the rapid screening of EVOO to detect adulteration, false labeling, and an inferior product.

  5. Analyses of bacterial communities in meju, a Korean traditional fermented soybean bricks, by cultivation-based and pyrosequencing methods.

    Science.gov (United States)

    Kim, Yi-Seul; Kim, Min-Cheol; Kwon, Soon-Wo; Kim, Soo-Jin; Park, In-Cheol; Ka, Jong-Ok; Weon, Hang-Yeon

    2011-06-01

    Despite the importance of meju as a raw material used to make Korean soy sauce (ganjang) and soybean paste (doenjang), little is known about the bacterial diversity of Korean meju. In this study, the bacterial communities in meju were examined using both culture-dependent and independent methods in order to evaluate the diversity of the bacterial population. Analyses of the 16S rRNA gene sequences of the bacterial strains isolated from meju samples showed that the dominant species were related to members of the genera Bacillus, Enterococcus, and Pediococcus. The community DNAs extracted from nine different meju samples were analyzed by barcoded pyrosequencing method targeting of the V1 to V3 hypervariable regions of the 16S rRNA gene. In total, 132,374 sequences, with an average read length of 468 bp, were assigned to several phyla, with Firmicutes (93.6%) representing the predominant phylum, followed by Proteobacteria (4.5%) and Bacteroidetes (0.8%). Other phyla accounted for less than 1% of the total bacterial sequences. Most of the Firmicutes were Bacillus and lactic acid bacteria, mainly represented by members of the genera Enterococcus, Lactococcus, and Leuconostoc, whose ratio varied among different samples. In conclusion, this study indicated that the bacterial communities in meju were very diverse and a complex microbial consortium containing various microorganisms got involved in meju fermentation than we expected before.

  6. Characterization of anti-listerial lactic acid bacteria isolated from Thai fermented fish products

    DEFF Research Database (Denmark)

    Østergaard, Anya; Embarek, Peter Karim Ben; Wedell-Neergaard, C.

    1998-01-01

    Thai fermented fish products were screened for lactic acid bacteria capable of inhibiting Listeria sp. (Listeria innocua). Of 4150 assumed lactic acid bacteria colonies from MRS agar plates that were screened by an agar-overlay method 58 (1.4%) were positive. Forty four of these strains were...... further characterized and 43 strains were inhibitory against Listeria monocytogenes. The strains were inhibitory to other Gram- positive (lactic acid) bacteria probably because of production of bacteriocins. All 44 strains inhibited both Vibrio cholerae and Vibrio parahaemolyticus and 37 were inhibitory...... be responsible for the rapid spontaneous fermentation of the products or that other yet-unknown factors ensure rapid fermentation. Overall anti-listerial lactic acid bacteria do occur in fermented fish products and the antibacterial activity against pathogenic bacteria indicates that they may be important...

  7. THE EFFECT OF FERMENTATION METHOD, MICROBES INOCULATION AND CARBON SOURCE PROPORTION ON THE QUALITY OF ORGANIC FERTILIZER MADE FROM LIQUID WASTES OF CHICKEN SLAUGHTERHOUSE

    Directory of Open Access Journals (Sweden)

    Y. Sastro

    2014-10-01

    Full Text Available This study was to examine the effect of fermentation, inoculation, and the proportion of carbonsources on the quality of organic fertilizer made from fermentation of liquid waste collected fromchicken slaughterhouse in Jakarta area. The parameters being tested included fermentation, microbialinoculation, and carbon source proportion. The observations were made after three weeks offermentation on the color, odor, pH, contents of elements C, NH4, NO3, total-N, P2O5, K2O andpathogenic microbes (Fusarium sp., Coletotrichum sp., Salmonella sp. and Eschercia coli. The fertilizerwere implemented for green chinese cabbage in six locations. It was found that the aerobic fermentationsystem combined with inoculation of the decomposer microbes (Lactobacillus spp. and the addition20% (v/v of a carbon source was the most appropriate method of fermentation in the production ofliquid organic fertilizers from liquid waste of chicken slaughterhouse. The quality of the fertilizer whichis based on physical, chemical and biological characteristics and crop responses still less than the similarcommercial fertilizer (EM4. Nevertheless, the nitrogen and phosphor contents of this liquid fertilizer(92,000 ppm and 143,000 ppm were significantly higher (P<0.05 than the EM4 (0.07 and 3.22 ppm.

  8. Commercially Available Rapid Methods for Detection of Selected Food-borne Pathogens.

    Science.gov (United States)

    Valderrama, Wladir B; Dudley, Edward G; Doores, Stephanie; Cutter, Catherine N

    2016-07-03

    Generally, the enumeration and isolation of food-borne pathogens is performed using culture-dependent methods. These methods are sensitive, inexpensive, and provide both qualitative and quantitative assessment of the microorganisms present in a sample, but these are time-consuming. For this reason, researchers are developing new techniques that allow detection of food pathogens in shorter period of time. This review identifies commercially available methods for rapid detection and quantification of Listeria monocytogenes, Salmonella spp., Staphylococcus aureus, and Shiga toxin-producing Escherichia coli in food samples. Three categories are discussed: immunologically based methods, nucleic acid-based assays, and biosensors. This review describes the basic mechanism and capabilities of each method, discusses the difficulties of choosing the most convenient method, and provides an overview of the future challenges for the technology for rapid detection of microorganisms.

  9. Investigating the Variation of Volatile Compound Composition in Maotai-Flavoured Liquor During Its Multiple Fermentation Steps Using Statistical Methods

    Directory of Open Access Journals (Sweden)

    Zheng-Yun Wu

    2016-01-01

    Full Text Available The use of multiple fermentations is one of the most specific characteristics of Maotai-flavoured liquor production. In this research, the variation of volatile composition of Maotai-flavoured liquor during its multiple fermentations is investigated using statistical approaches. Cluster analysis shows that the obtained samples are grouped mainly according to the fermentation steps rather than the distillery they originate from, and the samples from the first two fermentation steps show the greatest difference, suggesting that multiple fermentation and distillation steps result in the end in similar volatile composition of the liquor. Back-propagation neural network (BNN models were developed that satisfactorily predict the number of fermentation steps and the organoleptic evaluation scores of liquor samples from their volatile compositions. Mean impact value (MIV analysis shows that ethyl lactate, furfural and some high-boiling-point acids play important roles, while pyrazine contributes much less to the improvement of the flavour and taste of Maotai-flavoured liquor during its production. This study contributes to further understanding of the mechanisms of Maotai-flavoured liquor production.

  10. Research on adaptive segmentation and activity classification method of filamentous fungi image in microbe fermentation

    Science.gov (United States)

    Cai, Xiaochun; Hu, Yihua; Wang, Peng; Sun, Dujuan; Hu, Guilan

    2009-10-01

    The paper presents an adaptive segmentation and activity classification method for filamentous fungi image. Firstly, an adaptive structuring element (SE) construction algorithm is proposed for image background suppression. Based on watershed transform method, the color labeled segmentation of fungi image is taken. Secondly, the fungi elements feature space is described and the feature set for fungi hyphae activity classification is extracted. The growth rate evaluation of fungi hyphae is achieved by using SVM classifier. Some experimental results demonstrate that the proposed method is effective for filamentous fungi image processing.

  11. Rapid high temperature field test method for evaluation of geothermal calcite scale inhibitors

    Energy Technology Data Exchange (ETDEWEB)

    Asperger, R.G.

    1982-08-01

    A test method is described which allows the rapid field testing of calcite scale inhibitors in high- temperature geothermal brines. Five commercial formulations, chosen on the basis of laboratory screening tests, were tested in brines with low total dissolved solids at ca 500 F. Four were found to be effective; of these, 2 were found to be capable of removing recently deposited scale. One chemical was tested in the full-flow brine line for 6 wks. It was shown to stop a severe surface scaling problem at the well's control valve, thus proving the viability of the rapid test method. (12 refs.)

  12. Lactic acid bacteria ecology of three traditional fermented sausages produced in the North of Italy as determined by molecular methods.

    Science.gov (United States)

    Cocolin, Luca; Dolci, Paola; Rantsiou, Kalliopi; Urso, Rosalinda; Cantoni, Carlo; Comi, Giuseppe

    2009-05-01

    In this study the bacterial biodiversity during the maturation process of three traditional sausages produced in the North of Italy (Salame bergamasco, Salame cremonese and Salame mantovano) was investigated by using culture-dependent and -independent methods. Eleven plants, in the three provinces considered here, were selected because starter cultures were never used in the production. The bacterial ecology, as determined by plate counts, was dominated by lactic acid bacteria (LAB), with minor contribution of coagulase negative cocci and yeasts. After molecular identification of 486 LAB strains, the species more frequently isolated were Lactobacillus sakei and Lactobacillus curvatus. This evidence was also confirmed by PCR-Denaturing Gradient Gel Electrophoresis (DGGE). All the samples analyzed were characterized by the constant presence of L. sakei and L. curvatus bands. A richer biodiversity was only detected at the beginning of maturation. The results obtained by the molecular characterization of the L. sakei and L. curvatus and by the cluster analysis of the DGGE profiles highlighted a plant-specific population, rather than a geographic characterization of the products, underlining how the environmental and processing conditions are able to select specific microbiota responsible for the main transformations during the fermentation and ripening of the sausages.

  13. Selection of functional lactic acid bacteria as starter cultures for the fermentation of Korean leek (Allium tuberosum Rottler ex Sprengel.).

    Science.gov (United States)

    Yang, Jaesik; Ji, Yosep; Park, Hyunjoon; Lee, Jieun; Park, Soyoung; Yeo, Soyoung; Shin, Hyunkil; Holzapfel, Wilhelm H

    2014-11-17

    The purpose of this research was to find safe and suitable starter cultures for the fermentation of Korean leek (Allium tuberosum Rottler), also known as garlic chives or Oriental garlic. This traditional herb has several functional properties and a strong flavour; its leaves are used as food material. Eighteen strains of lactic acid bacteria (LAB) were isolated from well-fermented leek kimchi. Controlled fermentation of the leek leaves was conducted with 2 strains (Weissella confusa LK4 and Lactobacillus plantarum LK8), selected as potential starter cultures on the basis of their safety properties, and on the pH, total titratable acidity (TTA), and viable cell numbers [colony forming units (CFUml(-1))] achieved during the fermentation. Microbial dynamics was also followed during fermentation by using PCR-DGGE (Denaturing Gradient Gel Electrophoresis) on DNA level. To analyse bioactive compounds such as thiols and allicin (diallyl thiosulfinates), the total flavonoid and polyphenolic contents were determined by colorimetric methods. Functional properties were assessed on the basis of anti-oxidative capacities by determining the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical-scavenging effect, and ferric reducing antioxidant power (FRAP). W. confusa LK4 rapidly increased during the first stage of leek fermentation, and was mainly responsible for accelerated fermentation during the early period in contrast to L. plantarum LK8, a stronger acid producer during the later stages of fermentation. After 48 h fermentation, leeks fermented with W. confusa LK4 showed the highest radical scavenging effects and reducing ability. The detectable amount of allicin of fermented leeks decreased relative to the change in pH, whereas the concentration of thiols significantly increased. Total flavonoid and poly-phenolic contents changed during fermentation and showed correlation with anti-oxidant effects. We therefore suggest the suitability of W. confusa LK4 as a potential starter

  14. Determination of organic acids evolution during apple cider fermentation using an improved HPLC analysis method

    NARCIS (Netherlands)

    Zhang, H.; Zhou, F.; Ji, B.; Nout, M.J.R.; Fang, Q.; Zhang, Z.

    2008-01-01

    An efficient method for analyzing ten organic acids in food, namely citric, pyruvic, malic, lactic, succinic, formic, acetic, adipic, propionic and butyric acids, using HPLC was developed. Boric acid was added into the mobile phase to separate lactic and succinic acids, and a post-column buffer

  15. Oleaginous YeastRhodosporidium toruloidesas a Tool for Rapid Evaluation of Anti-Obesity Candidates: Inhibitory Effect of Persimmon Leaf Fermentate on Lipid Accumulation.

    Science.gov (United States)

    Lee, Nam Keun

    2017-10-28

    The aim of this study was to examine the efficiency of Rhodosporidium toruloides as a new tool to evaluate the triglyceride (TG) reduction effects of anti-obesity candidate materials. Unfermented and fermented persimmon leaf hot water extracts (UFPLE and FPLE) were used as anti-obesity agents. The content of TG in R. toruloides treated with FPLE was less than those with UFPLE by about 11% ( p YPD medium without the agents). Fat reduction in 3T3-L1 cells achieved by FPLE was about 13% higher than that achieved by UFPLE.

  16. Evolution of aromatic compounds during the second fermentation and aging of Brazilian sparkling wine

    Directory of Open Access Journals (Sweden)

    Verzeletti Andrelise

    2016-01-01

    Full Text Available In this work, we evaluate the physic-chemical characteristics and volatile compounds during the second fermentation and aging of typical Brazilian sparkling wines. For this purpose, second fermentations were conducted by the traditional method using a base wine elaborated with Pinot Noir, Chardonnay and Riesling Italic, and fermented with S. cerevisiae vr. bayanus EC1118 strain. Samples were collected from 0 to 360 days, and evaluated with respect to the basic physic-chemical characteristics, yeast population, and the concentration of volatile compounds. The results showed that the second fermentation, other than an increment in the alcohol concentration leads to a small increase in volatile acidity, where total acidity decreased during fermentation, and increase again during aging. Yeast population declined rapidly after fermentation, but autolysis initiated just after 9 month of aging. Based on the concentration of volatile compounds, three profiles could be defined: (1 a fermentation profile defined by higher concentrations of acetates and lower concentrations of ethylates and fatty acids; (2 a post-fermentation profile with intermediary concentrations of acetates, and increased concentrations of fatty acids, and their ethyl esters; and (3 a mature profile with higher concentrations of diethyl succinate, fusel alcohols, volatile fatty acids, and their ethyl esters, and lower concentrations of acetates.

  17. A rapid method for soil cement design : Louisiana slope value method.

    Science.gov (United States)

    1964-03-01

    The current procedure used by the Louisiana Department of Highways for laboratory design of cement stabilized soil base and subbase courses is taken from standard AASHO test methods, patterned after Portland Cement Association criteria. These methods...

  18. Furuncular myiasis: a simple and rapid method for extraction of intact Dermatobia hominis larvae.

    Science.gov (United States)

    Boggild, Andrea K; Keystone, Jay S; Kain, Kevin C

    2002-08-01

    We report a case of furuncular myiasis complicated by Staphylococcus aureus infection and beta-hemolytic streptococcal cellulitis. The Dermatobia hominis larva that caused this lesion could not be extracted using standard methods, including suffocation and application of lateral pressure, and surgery was contraindicated because of cellulitis. The botfly maggot was completely and rapidly extracted with an inexpensive, disposable, commercial venom extractor.

  19. Collision-induced fragmentation accurate mass spectrometric analysis methods to rapidly characterize phytochemicals in plant extracts

    Science.gov (United States)

    The rapid advances in analytical chromatography equipment have made the reliable and reproducible measurement of a wide range of plant chemical components possible. Full chemical characterization of a given plant material is possible with the new mass spectrometers currently available. New methods a...

  20. Collaborative validation of a rapid method for efficient virus concentration in bottled water

    DEFF Research Database (Denmark)

    Schultz, Anna Charlotte; Perelle, Sylvie; Di Pasquale, Simona

    2011-01-01

    Enteric viruses, including norovirus (NoV) and hepatitis A virus (HAV), have emerged as a major cause of waterborne outbreaks worldwide. Due to their low infectious doses and low concentrations in water samples, an efficient and rapid virus concentration method is required for routine control. Th...

  1. A Rapid Method for Measuring Strontium-90 Activity in Crops in China

    Directory of Open Access Journals (Sweden)

    Pan Lingjing Pan

    2017-01-01

    Full Text Available A rapid method for measuring Sr-90 activity in crop ashes is presented. Liquid scintillation counting, combined with ion exchange columns 4‘, 4“(5“-di-t-butylcyclohexane-18-crown-6, is used to determine the activity of Sr-90 in crops. The yields of chemical procedure are quantified using gravimetric analysis. The conventional method that uses ion-exchange resin with HDEHP could not completely remove all the bismuth when comparatively large lead and bismuth exist in the samples. This is overcome by the rapid method. The chemical yield of this method is about 60% and the MDA for Sr-90 is found to be 2:32 Bq/kg. The whole procedure together with using spectrum analysis to determine the activity only takes about one day, which is really a large improvement compared with the conventional method. A modified conventional method is also described here to verify the value of the rapid one. These two methods can meet di_erent needs of daily monitoring and emergency situation.

  2. A Rapid Method for Measuring Strontium-90 Activity in Crops in China

    Science.gov (United States)

    Pan, Lingjing Pan; Yu, Guobing; Wen, Deyun; Chen, Zhi; Sheng, Liusi; Liu, Chung-King; Xu, X. George

    2017-09-01

    A rapid method for measuring Sr-90 activity in crop ashes is presented. Liquid scintillation counting, combined with ion exchange columns 4`, 4"(5")-di-t-butylcyclohexane-18-crown-6, is used to determine the activity of Sr-90 in crops. The yields of chemical procedure are quantified using gravimetric analysis. The conventional method that uses ion-exchange resin with HDEHP could not completely remove all the bismuth when comparatively large lead and bismuth exist in the samples. This is overcome by the rapid method. The chemical yield of this method is about 60% and the MDA for Sr-90 is found to be 2:32 Bq/kg. The whole procedure together with using spectrum analysis to determine the activity only takes about one day, which is really a large improvement compared with the conventional method. A modified conventional method is also described here to verify the value of the rapid one. These two methods can meet di_erent needs of daily monitoring and emergency situation.

  3. Considerations for Task Analysis Methods and Rapid E-Learning Development Techniques

    Directory of Open Access Journals (Sweden)

    Dr. Ismail Ipek

    2014-02-01

    Full Text Available The purpose of this paper is to provide basic dimensions for rapid training development in e-learning courses in education and business. Principally, it starts with defining task analysis and how to select tasks for analysis and task analysis methods for instructional design. To do this, first, learning and instructional technologies as visions of the future were discussed. Second, the importance of task analysis methods in rapid e-learning was considered, with learning technologies as asynchronous and synchronous e-learning development. Finally, rapid instructional design concepts and e-learning design strategies were defined and clarified with examples, that is, all steps for effective task analysis and rapid training development techniques based on learning and instructional design approaches were discussed, such as m-learning and other delivery systems. As a result, the concept of task analysis, rapid e-learning development strategies and the essentials of online course design were discussed, alongside learner interface design features for learners and designers.

  4. Xanthan GumRecovery from Palm Oil-Based Fermentation Broth by Hollow Fibre Microfiltration (MF) Membrane with ProcessOptimisation Using Taguchi Method

    OpenAIRE

    Sufian Soaib, M.; M. Sabet; Krishnan, J.; VPS Veluri, M.

    2013-01-01

    First stage Xanthan recovery (cell and oil separation) from palm oil-based fermentation broth was carried out by hollow fibre microfiltration (MF) using Taguchi method as design of experiment (DOE) to study the effect of four main parameters on Xanthan recovery; transmembrane pressure (TMP), crossflow velocity (CFV), ionic strength (IS) and temperature (T). From S/N ratio larger-the-better analysis, optimum conditions for Xanthan recovery were at level 2 of TMP, IS and T respectively and leve...

  5. An economical and combined method for rapid and efficient isolation of fungal DNA.

    Science.gov (United States)

    Lech, T; Syguła-Cholewinska, J; Szostak-Kot, J

    2014-12-18

    DNA isolation is a crucial step of conducting genetic studies in any organism. However, this process is quite difficult when studying fungi because of the need to damage the fungal cell walls of specific structures. In this study, we developed a method for the rapid and efficient isolation of fungal DNA based on simultaneous mechanical and enzymatic cell wall degradation. There are several typical modifications of the standard phenol-chloroform DNA extraction method. This method can be modified to degrade the fungal cell wall. The first step of the presented DNA extraction included manual homogenization in modified lysis buffer. Next, enzymatic digestion using 2 enzymes was conducted, including lyticase and proteinase K. To carefully select the most favorable conditions, we developed an economical, rapid, and reliable method for fungal DNA extraction that ensures both high efficiency and proper purity, which are essential for further analyses.

  6. Rapid method for determination of carbonyl groups in lignin compounds by headspace gas chromatography.

    Science.gov (United States)

    Li, Jing; Hu, Hui-Chao; Chai, Xin-Sheng

    2015-07-24

    The paper reports on a novel method for rapid determination of carbonyl in lignins by headspace gas chromatography (HS-GC). The method involves the quantitative carbonyl reduction for aldehydes in 2min at room temperature or for acetones in 30min at 80°C by sodium borohydride solution in a closed headspace sample vial. After the reaction, the solution was acidified by injecting sulfuric acid solution and the hydrogen released to the headspace was determined by GC using thermal-conductivity detector. The results showed that with the addition of SiO2 powder, the reduction reaction of carbonyl groups can be greatly facilitated. The method has a good measurement precision (RSD<7.74%) and accuracy (relative error <10% compared with a reference method) in the carbonyl quantification. It is suitable to be used for rapid determination of carbonyl content in lignin and related materials. Copyright © 2015 Elsevier B.V. All rights reserved.

  7. Metabolic shift and electron discharge pattern of anaerobic consortia as a function of pretreatment method applied during fermentative hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Srikanth, S.; Venkata Mohan, S.; Lalit Babu, V.; Sarma, P.N. [Bioengineering and Environmental Centre, Indian Institute of Chemical Technology, Hyderabad 500 607, AP (India)

    2010-10-15

    We have made an attempt to evaluate the variation in the electron discharge (ED) pattern of anaerobic consortia as a function of pretreatment viz., chemical, heat-shock, acid and oxygen-shock in comparison with untreated mixed consortia during fermentative hydrogen (H{sub 2}) production. Experiments were performed with dairy wastewater as substrate using anaerobic mixed consortia as biocatalyst (pretreated individually and in combination). Cyclic voltammetry (CV) elucidated significant variation in the ED pattern of mixed consortia along with H{sub 2} production and substrate degradation (SD) as a function of pretreatment method applied. Higher ED was observed with all pretreated consortia which can be attributed to the stable proton (H{sup +}) shuttling due to the suppression of methanogenic activity. Oxygen-shock method and untreated consortia showed lower H{sub 2} production and higher SD among the variations studied, while, combined pretreated consortia resulted higher H{sub 2} production and lower SD. Lower ED observed with untreated consortia suggests the H{sup +} reduction during methanogenesis rather than the inter-conversion of metabolites, which is presumed to be necessary for H{sub 2} production. ED observed with combined pretreated consortia corroborated well with the observed H{sub 2} production. Redox pairs were visualized on the voltammograms with almost all the experimental variations studied except untreated consortia. The potentials (E{sub 0}) of redox pairs observed were corresponding to intracellular electron carriers viz., NAD{sup +}/NADH (E{sub 0} -0.32 V) and FAD{sup +}/FADH{sub 2} (E{sub 0} -0.24 V). (author)

  8. Effects of forage offering method on performance, rumen fermentation, nutrient digestibility and nutritional behaviour in Holstein dairy calves.

    Science.gov (United States)

    EbnAli, A; Khorvash, M; Ghorbani, G R; Mahdavi, A H; Malekkhahi, M; Mirzaei, M; Pezeshki, A; Ghaffari, M H

    2016-10-01

    The potential effect of dietary forage supplementation on the performance and rumen development in dairy calves is well established. However, limited research has been directed to the comparative effects of forage offering methods on calf performance. The objective of the present study was to determine the effects of forage provision methods (total mixed ration or free choice) on the performance, nutrient digestibility, rumen fermentation and nutritional behaviour in newborn calves. Forty-five Holstein dairy calves (3 days of age and 41 ± 2 kg of body weight) were assigned to the following three groups (n = 15): (i) starter without forage provision (CON), (ii) starter supplemented with 10% alfalfa hay (AH) as a total mixed ration (AH-TMR) and (iii) starter and AH as a free-choice provision (AH-FC) for a period of 70 days. All the calves were offered 5 l of milk/day from day 3 to 50, and 2.5 l/day from day 50 until weaning on day 56. Dry matter intake (DMI) was greater (p pre- and post-weaning periods. Calves fed the AH-FC diet showed the highest post-weaning DMI among the treatments. The calves receiving ad libitum forage tended (p = 0.08) to increase crude protein digestibility and overall volatile fatty acids (VFA) concentrations in the rumen. No differences were observed among the treatments at the time spent on standing, lying, eating and performing non-nutritive oral behaviours. Compared to CON calves, animals in the AH-TMR treatment spent more time (p calves. Hence, there is no benefit in the free-choice provision of AH in dairy calves. Journal of Animal Physiology and Animal Nutrition © 2016 Blackwell Verlag GmbH.

  9. Apparatus and method for rapid separation and detection of hydrocarbon fractions in a fluid stream

    Science.gov (United States)

    Sluder, Charles S.; Storey, John M.; Lewis, Sr., Samuel A.

    2013-01-22

    An apparatus and method for rapid fractionation of hydrocarbon phases in a sample fluid stream are disclosed. Examples of the disclosed apparatus and method include an assembly of elements in fluid communication with one another including one or more valves and at least one sorbent chamber for removing certain classifications of hydrocarbons and detecting the remaining fractions using a detector. The respective ratios of hydrocarbons are determined by comparison with a non separated fluid stream.

  10. A convenient and rapid method for genetic transformation of E. coli with plasmids.

    Science.gov (United States)

    Chen, X; Guo, P; Xie, Z; Shen, P

    2001-12-01

    A convenient and rapid method for the genetic transformation of Escherichia coli with plasmids is proposed. By mixing the recipient cells and plasmid DNA and spreading them directly on selective medium plates containing Ca2+, the so-called 'plate transformation' could achieve almost the same transformation efficiency as the classical transformation method with calcium. The whole protocol takes only about 2 min, its simplicity compared favorably, not only to the usual protocol, but also to all other documented modifications.

  11. Development of a method for the direct fermentation of semolina by selected sourdough lactic acid bacteria.

    Science.gov (United States)

    Alfonzo, Antonio; Urso, Valeria; Corona, Onofrio; Francesca, Nicola; Amato, Gaetano; Settanni, Luca; Di Miceli, Giuseppe

    2016-12-19

    Three obligately heterofermentative lactic acid bacteria (LAB) strains (Lactobacillus sanfranciscensis PON100336, Leuconostoc citreum PON10079 and Weissella cibaria PON10030) were used in this study as a multi-species starter culture for sourdough production. The starter inoculum was prepared and propagated in sterile semolina extract (SSE) broth. Acidification kinetics, microbiological counts detected on specific media for sourdough LAB, polymorphic profile comparison and species-specific PCRs evidenced a stability of the liquid inoculum over time determining its suitability for direct addition to semolina. In order to validate this innovative method for the production of durum wheat (Triticum durum Desf) sourdoughs, 15 semolinas (from ten old and five modern genotypes cultivated in Sicily, southern Italy) were used to prepare the SSEs and to produce sourdoughs and finally breads. Chemical and microbiological analyses of the sourdoughs and the evaluation of the quality parameters (weight loss, height, crumb and crust colour, image analysis and volatile organic compound generation) of the resulting breads indicated that the direct addition of the liquid inocula propagated in SSE is a valuable method to stabilise the production of sourdoughs. The differences registered during the technological characterisation of the breads were underlined by the sensory tests and the multivariate analysis and are mainly imputable to the type of semolina. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Rapid qualitative research methods during complex health emergencies: A systematic review of the literature.

    Science.gov (United States)

    Johnson, Ginger A; Vindrola-Padros, Cecilia

    2017-09-01

    The 2013-2016 Ebola outbreak in West Africa highlighted both the successes and limitations of social science contributions to emergency response operations. An important limitation was the rapid and effective communication of study findings. A systematic review was carried out to explore how rapid qualitative methods have been used during global heath emergencies to understand which methods are commonly used, how they are applied, and the difficulties faced by social science researchers in the field. We also asses their value and benefit for health emergencies. The review findings are used to propose recommendations for qualitative research in this context. Peer-reviewed articles and grey literature were identified through six online databases. An initial search was carried out in July 2016 and updated in February 2017. The PRISMA checklist was used to guide the reporting of methods and findings. The articles were assessed for quality using the MMAT and AACODS checklist. From an initial search yielding 1444 articles, 22 articles met the criteria for inclusion. Thirteen of the articles were qualitative studies and nine used a mixed-methods design. The purpose of the rapid studies included: the identification of causes of the outbreak, and assessment of infrastructure, control strategies, health needs and health facility use. The studies varied in duration (from 4 days to 1 month). The main limitations identified by the authors were: the low quality of the collected data, small sample sizes, and little time for cross-checking facts with other data sources to reduce bias. Rapid qualitative methods were seen as beneficial in highlighting context-specific issues that need to be addressed locally, population-level behaviors influencing health service use, and organizational challenges in response planning and implementation. Recommendations for carrying out rapid qualitative research in this context included the early designation of community leaders as a point of

  13. Effects of Different Application Methods of Methane Fermentation Digested Liquid into the Paddy Plot on Soil Nitrogen Behavior and Rice Yield

    Science.gov (United States)

    Watanabe, Satoko; Nakamura, Kimihito; Seok Ryu, Chan; Iida, Michihisa; Kawashima, Shigeto

    Methane fermentation technique with the treatment of animal waste and food waste is drawing public attention as a good option for the utilization of biomass resources and it is investigated how to apply the by-product of fermentation (methane fermentation digested liquid) to agricultural fields as a fertilizer. It is important to determine an adequate method of applying digested liquid to a paddy plot as fertilizer taking into account the concentrations of soil nitrogen components and rice yield. The objective of this study is to compare the performances of three methods of applying digested liquid to paddy plots in terms of the nitrogen transformation in soil, rice yield, and nitrogen load in effluent. The three methods were pouring (with irrigation water), spreading onto the surface of a plot, and injection into paddy soil. It was found that the ammonium nitrogen concentration and the dissolved organic nitrogen concentration in soil of the spreading plot were higher than that for the pouring plot and that for the injecting plot. The rice yield was higher in the spreading plot than in the injecting and pouring plots. And, there was a significant correlation between the rice yield and the dissolved organic nitrogen just before and after the panicle initiation stage. There were no differences in the nitrogen effluent loads with surface drainage.

  14. Identification of solid state fermentation degree with FT-NIR spectroscopy: Comparison of wavelength variable selection methods of CARS and SCARS

    Science.gov (United States)

    Jiang, Hui; Zhang, Hang; Chen, Quansheng; Mei, Congli; Liu, Guohai

    2015-10-01

    The use of wavelength variable selection before partial least squares discriminant analysis (PLS-DA) for qualitative identification of solid state fermentation degree by FT-NIR spectroscopy technique was investigated in this study. Two wavelength variable selection methods including competitive adaptive reweighted sampling (CARS) and stability competitive adaptive reweighted sampling (SCARS) were employed to select the important wavelengths. PLS-DA was applied to calibrate identified model using selected wavelength variables by CARS and SCARS for identification of solid state fermentation degree. Experimental results showed that the number of selected wavelength variables by CARS and SCARS were 58 and 47, respectively, from the 1557 original wavelength variables. Compared with the results of full-spectrum PLS-DA, the two wavelength variable selection methods both could enhance the performance of identified models. Meanwhile, compared with CARS-PLS-DA model, the SCARS-PLS-DA model achieved better results with the identification rate of 91.43% in the validation process. The overall results sufficiently demonstrate the PLS-DA model constructed using selected wavelength variables by a proper wavelength variable method can be more accurate identification of solid state fermentation degree.

  15. Seed oil polyphenols: rapid and sensitive extraction method and high resolution-mass spectrometry identification.

    Science.gov (United States)

    Koubaa, Mohamed; Mhemdi, Houcine; Vorobiev, Eugène

    2015-05-01

    Phenolic content is a primary parameter for vegetables oil quality evaluation, and directly involved in the prevention of oxidation and oil preservation. Several methods have been reported in the literature for polyphenols extraction from seed oil but the approaches commonly used remain manually handled. In this work, we propose a rapid and sensitive method for seed oil polyphenols extraction and identification. For this purpose, polyphenols were extracted from Opuntia stricta Haw seed oil, using high frequency agitation, separated, and then identified using a liquid chromatography-high resolution mass spectrometry method. Our results showed good sensitivity and reproducibility of the developed methods. Copyright © 2015 Elsevier Inc. All rights reserved.

  16. TRADITIONAL FERMENTED FOODS OF LESOTHO

    Directory of Open Access Journals (Sweden)

    Tendekayi H. Gadaga

    2013-06-01

    Full Text Available This paper describes the traditional methods of preparing fermented foods and beverages of Lesotho. Information on the preparation methods was obtained through a combination of literature review and face to face interviews with respondents from Roma in Lesotho. An unstructured questionnaire was used to capture information on the processes, raw materials and utensils used. Four products; motoho (a fermented porridge, Sesotho (a sorghum based alcoholic beverage, hopose (sorghum fermented beer with added hops and mafi (spontaneously fermented milk, were found to be the main fermented foods prepared and consumed at household level in Lesotho. Motoho is a thin gruel, popular as refreshing beverage as well as a weaning food. Sesotho is sorghum based alcoholic beverage prepared for household consumption as well as for sale. It is consumed in the actively fermenting state. Mafi is the name given to spontaneously fermented milk with a thick consistency. Little research has been done on the technological aspects, including the microbiological and biochemical characteristics of fermented foods in Lesotho. Some of the traditional aspects of the preparation methods, such as use of earthenware pots, are being replaced, and modern equipment including plastic utensils are being used. There is need for further systematic studies on the microbiological and biochemical characteristics of these these products.

  17. Lactose fermentation by engineered Saccharomyces cerevisiae capable of fermenting cellobiose.

    Science.gov (United States)

    Liu, Jing-Jing; Zhang, Guo-Chang; Oh, Eun Joong; Pathanibul, Panchalee; Turner, Timothy L; Jin, Yong-Su

    2016-09-20

    Lactose is an inevitable byproduct of the dairy industry. In addition to cheese manufacturing, the growing Greek yogurt industry generates excess acid whey, which contains lactose. Therefore, rapid and efficient conversion of lactose to fuels and chemicals would be useful for recycling the otherwise harmful acid whey. Saccharomyces cerevisiae, a popular metabolic engineering host, cannot natively utilize lactose. However, we discovered that an engineered S. cerevisiae strain (EJ2) capable of fermenting cellobiose can also ferment lactose. This finding suggests that a cellobiose transporter (CDT-1) can transport lactose and a β-glucosidase (GH1-1) can hydrolyze lactose by acting as a β-galactosidase. While the lactose fermentation by the EJ2 strain was much slower than the cellobiose fermentation, a faster lactose-fermenting strain (EJ2e8) was obtained through serial subcultures on lactose. The EJ2e8 strain fermented lactose with a consumption rate of 2.16g/Lh. The improved lactose fermentation by the EJ2e8 strain was due to the increased copy number of cdt-1 and gh1-1 genes. Looking ahead, the EJ2e8 strain could be exploited for the production of other non-ethanol fuels and chemicals from lactose through further metabolic engineering. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. RAPID AND EFFICIENT METHOD FOR ENVIRONMENTAL DNA EXTRACTION AND PURIFICATION FROM SOIL

    Directory of Open Access Journals (Sweden)

    J. Hamedi

    2016-06-01

    Full Text Available Large proportion of microbial population in the world is unculturable. Extraction of total DNA from soil is usually a crucial step considering to the difficulties of study the uncultivable microorganisms. Humic acid is considered as the main inhibitory agent in the environmental DNA studies. Here, we introduced a rapid and efficient method for DNA extraction and purification from soil. Yield of DNA extraction by the presented method was 130 ng/µl. Three conventional methods of DNA extraction including liquid nitrogen incursion, bead beating and sonication were performed as control methods. Yield of DNA extraction by these methods were 110, 90 and 50 ng/µl, respectively. A rapid and efficient one step DNA purification method was introduced instead of hazardous conventional phenol-chloroform methods. Humic acid removal percentage by the introduced method was 95.8 % that is comparable with 97 % gained by the conventional gel extraction method and yield of DNA after purification was 84 % and 73 %, respectively. This study could be useful in molecular ecology and metagenomics study as a fast and reliable method.

  19. Data Pre-Processing Method to Remove Interference of Gas Bubbles and Cell Clusters During Anaerobic and Aerobic Yeast Fermentations in a Stirred Tank Bioreactor

    Science.gov (United States)

    Princz, S.; Wenzel, U.; Miller, R.; Hessling, M.

    2014-11-01

    One aerobic and four anaerobic batch fermentations of the yeast Saccharomyces cerevisiae were conducted in a stirred bioreactor and monitored inline by NIR spectroscopy and a transflectance dip probe. From the acquired NIR spectra, chemometric partial least squares regression (PLSR) models for predicting biomass, glucose and ethanol were constructed. The spectra were directly measured in the fermentation broth and successfully inspected for adulteration using our novel data pre-processing method. These adulterations manifested as strong fluctuations in the shape and offset of the absorption spectra. They resulted from cells, cell clusters, or gas bubbles intercepting the optical path of the dip probe. In the proposed data pre-processing method, adulterated signals are removed by passing the time-scanned non-averaged spectra through two filter algorithms with a 5% quantile cutoff. The filtered spectra containing meaningful data are then averaged. A second step checks whether the whole time scan is analyzable. If true, the average is calculated and used to prepare the PLSR models. This new method distinctly improved the prediction results. To dissociate possible correlations between analyte concentrations, such as glucose and ethanol, the feeding analytes were alternately supplied at different concentrations (spiking) at the end of the four anaerobic fermentations. This procedure yielded low-error (anaerobic) PLSR models for predicting analyte concentrations of 0.31 g/l for biomass, 3.41 g/l for glucose, and 2.17 g/l for ethanol. The maximum concentrations were 14 g/l biomass, 167 g/l glucose, and 80 g/l ethanol. Data from the aerobic fermentation, carried out under high agitation and high aeration, were incorporated to realize combined PLSR models, which have not been previously reported to our knowledge.

  20. The use of rapid review methods in health technology assessments: 3 case studies.

    Science.gov (United States)

    Kaltenthaler, Eva; Cooper, Katy; Pandor, Abdullah; Martyn-St James, Marrissa; Chatters, Robin; Wong, Ruth

    2016-08-26

    Rapid reviews are of increasing importance within health technology assessment due to time and resource constraints. There are many rapid review methods available although there is little guidance as to the most suitable methods. We present three case studies employing differing methods to suit the evidence base for each review and outline some issues to consider when selecting an appropriate method. Three recently completed systematic review short reports produced for the UK National Institute for Health Research were examined. Different approaches to rapid review methods were used in the three reports which were undertaken to inform the commissioning of services within the NHS and to inform future trial design. We describe the methods used, the reasoning behind the choice of methods and explore the strengths and weaknesses of each method. Rapid review methods were chosen to meet the needs of the review and each review had distinctly different challenges such as heterogeneity in terms of populations, interventions, comparators and outcome measures (PICO) and/or large numbers of relevant trials. All reviews included at least 10 randomised controlled trials (RCTs), each with numerous included outcomes. For the first case study (sexual health interventions), very diverse studies in terms of PICO were included. P-values and summary information only were presented due to substantial heterogeneity between studies and outcomes measured. For the second case study (premature ejaculation treatments), there were over 100 RCTs but also several existing systematic reviews. Data for meta-analyses were extracted directly from existing systematic reviews with new RCT data added where available. For the final case study (cannabis cessation therapies), studies included a wide range of interventions and considerable variation in study populations and outcomes. A brief summary of the key findings for each study was presented and narrative synthesis used to summarise results for each

  1. [Development of a rapid test kit for antibody to HIV by nano immunomagnetic lateral flow method].

    Science.gov (United States)

    Yang, Fa-qing; Lee, Tony; Wang, Chao-nan; Sun, Shu-ye; Li, Shan-shan; Tian, Hui

    2010-06-01

    To develop a rapid test kit for antibody to HIV by nano immunomagnetic lateral flow method. A rapid test kit was developed by conjugation of the HIV antigen gp41 and gp36 to 200nm super paramagnetic particles by carbodiimide (EDC) and coating of the HIV antigen gp41 and gp36 to nitrocellulose membrane. Then the kit was evaluated with serials of experiments. The kit was qualified with examination of national reference panel of anti-HIV antibody for colloidal gold diagnostic kit. The sensitivity was 100% by tested with 20 HIV antibody positive sera, the specificity was 98.5% by tested with 600 HIV antibody negative sera, respectively. The stability of the kit was over 12 month by storage at room temperature. A diagnostic kit for antibody to HIV was developed with the advantages of convenience, rapid test, good stability and point of care.

  2. Rapid culture-based methods for drug-resistance detection in Mycobacterium tuberculosis.

    Science.gov (United States)

    Palomino, Juan Carlos; Martin, Anandi; Von Groll, Andrea; Portaels, Francoise

    2008-10-01

    Tuberculosis still represents a major public health problem, especially in low-resource countries where the burden of the disease is more important. Multidrug-resistant and extensively drug drug-resistant tuberculosis constitute serious problems for the efficient control of the disease stressing the need to investigate resistance to first- and second-line drugs. Conventional methods for detecting drug-resistance in Mycobacterium tuberculosis are slow and cumbersome. The most commonly used proportion method on Löwenstein-Jensen medium or Middlebrook agar requires a minimum of 3-4 weeks to produce results. Several new approaches have been proposed in the last years for the rapid and timely detection of drug-resistance in tuberculosis. This review will address phenotypic culture-based methods for rapid drug susceptibility testing in M. tuberculosis.

  3. Determination of rapid chlorination rate constants by a stopped-flow spectrophotometric competition kinetics method.

    Science.gov (United States)

    Song, Dean; Liu, Huijuan; Qiang, Zhimin; Qu, Jiuhui

    2014-05-15

    Free chlorine is extensively used for water and wastewater disinfection nowadays. However, it still remains a big challenge to determine the rate constants of rapid chlorination reactions although competition kinetics and stopped-flow spectrophotometric (SFS) methods have been employed individually to investigate fast reaction kinetics. In this work, we proposed an SFS competition kinetics method to determine the rapid chlorination rate constants by using a common colorimetric reagent, N,N-diethyl-p-phenylenediamine (DPD), as a reference probe. A kinetic equation was first derived to estimate the reaction rate constant of DPD towards chlorine under a given pH and temperature condition. Then, on that basis, an SFS competition kinetics method was proposed to determine directly the chlorination rate constants of several representative compounds including tetracycline, ammonia, and four α-amino acids. Although Cl2O is more reactive than HOCl, its contribution to the overall chlorination kinetics of the test compounds could be neglected in this study. Finally, the developed method was validated through comparing the experimentally measured chlorination rate constants of the selected compounds with those obtained or calculated from literature and analyzing with Taft's correlation as well. This study demonstrates that the SFS competition kinetics method can measure the chlorination rate constants of a test compound rapidly and accurately. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Rapid Column Extraction Method for Actinides and Sr-89/90 in Water Samples

    Energy Technology Data Exchange (ETDEWEB)

    MAXWELL III, SHERROD L.

    2005-06-15

    The SRS Environmental Laboratory analyzes water samples for environmental monitoring, including river water and ground water samples. A new, faster actinide and strontium 89/90 separation method has been developed and implemented to improve productivity, reduce labor costs and add capacity to this laboratory. This method uses stacked TEVA Resin{reg_sign}, TRU Resin{reg_sign} and Sr-Resin{reg_sign} cartridges from Eichrom Technologies (Darien, IL, USA) that allows the rapid separation of plutonium (Pu), neptunium (Np), uranium (U), americium (Am), curium (Cm) and thorium (Th) using a single multi-stage column combined with alpha spectrometry. By using vacuum box cartridge technology with rapid flow rates, sample preparation time is minimized. The method can be used for routine analysis or as a rapid method for emergency preparedness. Thorium and curium are often analyzed separately due to the interference of the daughter of Th-229 tracer, actinium (Ac)-225, on curium isotopes when measured by alpha spectrometry. This new method also adds a separation step using DGA Resin{reg_sign}, (Diglycolamide Resin, Eichrom Technologies) to remove Ac-225 and allow the separation and analysis of thorium isotopes and curium isotopes at the same time.

  5. Mycobacteria mobility shift assay: a method for the rapid identification of Mycobacterium tuberculosis and nontuberculous mycobacteria

    Directory of Open Access Journals (Sweden)

    Letícia Muraro Wildner

    2014-06-01

    Full Text Available The identification of mycobacteria is essential because tuberculosis (TB and mycobacteriosis are clinically indistinguishable and require different therapeutic regimens. The traditional phenotypic method is time consuming and may last up to 60 days. Indeed, rapid, affordable, specific and easy-to-perform identification methods are needed. We have previously described a polymerase chain reaction-based method called a mycobacteria mobility shift assay (MMSA that was designed for Mycobacterium tuberculosis complex (MTC and nontuberculous mycobacteria (NTM species identification. The aim of this study was to assess the MMSA for the identification of MTC and NTM clinical isolates and to compare its performance with that of the PRA-hsp65 method. A total of 204 clinical isolates (102 NTM and 102 MTC were identified by the MMSA and PRA-hsp65. For isolates for which these methods gave discordant results, definitive species identification was obtained by sequencing fragments of the 16S rRNA and hsp65 genes. Both methods correctly identified all MTC isolates. Among the NTM isolates, the MMSA alone assigned 94 (92.2% to a complex or species, whereas the PRA-hsp65 method assigned 100% to a species. A 91.5% agreement was observed for the 94 NTM isolates identified by both methods. The MMSA provided correct identification for 96.8% of the NTM isolates compared with 94.7% for PRA-hsp65. The MMSA is a suitable auxiliary method for routine use for the rapid identification of mycobacteria.

  6. Adapting and Evaluating a Rapid, Low-Cost Method to Enumerate Flies in the Household Setting.

    Science.gov (United States)

    Wolfe, Marlene K; Dentz, Holly N; Achando, Beryl; Mureithi, MaryAnne; Wolfe, Tim; Null, Clair; Pickering, Amy J

    2017-02-08

    Diarrhea is a leading cause of death among children under 5 years of age worldwide. Flies are important vectors of diarrheal pathogens in settings lacking networked sanitation services. There is no standardized method for measuring fly density in households; many methods are cumbersome and unvalidated. We adapted a rapid, low-cost fly enumeration technique previously developed for industrial settings, the Scudder fly grill, for field use in household settings. We evaluated its performance in comparison to a sticky tape fly trapping method at latrine and food preparation areas among households in rural Kenya. The grill method was more sensitive; it detected the presence of any flies at 80% (433/543) of sampling locations versus 64% (348/543) of locations by the sticky tape. We found poor concordance between the two methods, suggesting that standardizing protocols is important for comparison of fly densities between studies. Fly species identification was feasible with both methods; however, the sticky tape trap allowed for more nuanced identification. Both methods detected a greater presence of bottle flies near latrines compared with food preparation areas (P < 0.01). The grill method detected more flies at the food preparation area compared with near the latrine (P = 0.014) while the sticky tape method detected no difference. We recommend the Scudder grill as a sensitive fly enumeration tool that is rapid and low cost to implement. © The American Society of Tropical Medicine and Hygiene.

  7. Rapid and effective DNA extraction method with bead grinding for a large amount of fungal DNA.

    Science.gov (United States)

    Watanabe, M; Lee, K; Goto, K; Kumagai, S; Sugita-Konishi, Y; Hara-Kudo, Y

    2010-06-01

    To identify a rapid method for extracting a large amount of DNA from fungi associated with food hygiene, extraction methods were compared using fungal pellets formed rapidly in liquid media. Combinations of physical and chemical methods or commercial kits were evaluated with 3 species of yeast, 10 species of ascomycetous molds, and 4 species of zygomycetous molds. Bead grinding was the physical method, followed by chemical methods involving sodium dodecyl sulfate (SDS), cetyl trimethyl ammonium bromide (CTAB), and benzyl chloride and two commercial kits. Quantity was calculated by UV absorbance at 260 nm, quality was determined by the ratio of UV absorbance at 260 and 280 nm, and gene amplifications and electrophoresis profiles of whole genomes were analyzed. Bead grinding with the SDS method was the most effective for DNA extraction for yeasts and ascomycetous molds, and bead grinding with the CTAB method was most effective with zygomycetous molds. For both groups of molds, bead grinding with the CTAB method was the best approach for DNA extraction. Because this combination also is relatively effective for yeasts, it can be used to extract a large amount of DNA from a wide range of fungi. The DNA extraction methods are useful for developing gene indexes to identify fungi with molecular techniques, such as DNA fingerprinting.

  8. Mycobacteria mobility shift assay: a method for the rapid identification of Mycobacterium tuberculosis and nontuberculous mycobacteria.

    Science.gov (United States)

    Wildner, Letícia Muraro; Bazzo, Maria Luiza; Liedke, Susie Coutinho; Nogueira, Christiane Lourenço; Segat, Gabriela; Senna, Simone Gonçalves; Schlindwein, Aline Daiane; Oliveira, Jaquelline Germano de; Rovaris, Darcita B; Bonjardim, Claudio A; Kroon, Erna G; Ferreira, Paulo C P

    2014-06-01

    The identification of mycobacteria is essential because tuberculosis (TB) and mycobacteriosis are clinically indistinguishable and require different therapeutic regimens. The traditional phenotypic method is time consuming and may last up to 60 days. Indeed, rapid, affordable, specific and easy-to-perform identification methods are needed. We have previously described a polymerase chain reaction-based method called a mycobacteria mobility shift assay (MMSA) that was designed for Mycobacterium tuberculosis complex (MTC) and nontuberculous mycobacteria (NTM) species identification. The aim of this study was to assess the MMSA for the identification of MTC and NTM clinical isolates and to compare its performance with that of the PRA-hsp65 method. A total of 204 clinical isolates (102 NTM and 102 MTC) were identified by the MMSA and PRA-hsp65. For isolates for which these methods gave discordant results, definitive species identification was obtained by sequencing fragments of the 16S rRNA and hsp65 genes. Both methods correctly identified all MTC isolates. Among the NTM isolates, the MMSA alone assigned 94 (92.2%) to a complex or species, whereas the PRA-hsp65 method assigned 100% to a species. A 91.5% agreement was observed for the 94 NTM isolates identified by both methods. The MMSA provided correct identification for 96.8% of the NTM isolates compared with 94.7% for PRA-hsp65. The MMSA is a suitable auxiliary method for routine use for the rapid identification of mycobacteria.

  9. A rapid chromatographic method for quality control of technetium-99m-bicisate.

    Science.gov (United States)

    Amin, K C; Saha, G B; Go, R T

    1997-03-01

    The purpose of this work was to develop a simple and rapid method to determine the radiochemical purity of 99mTc-bicisate. A rapid paper chromatographic (PC) method was developed to determine the radiochemical purity of 99mTc-bicisate and compare the results with those of the manufacturer's recommended method. The present PC method included Whatman 3MM paper as the solid phase and ethyl acetate as the solvent. The time for chromatography by this technique was 4-5 min compared to about 23 min by the manufacturer's method. The Rf value of 99mTc-bicisate (Rf = 0.9-1.0) was widely different from those of 99mTcO4- and reduced 99mTc (Rf = 0.0 for both) so the chromatographic strip after development could be readily cut into two segments, in order to determine the labeling yield. No significant difference in labeling yields was found between the present method and the manufacturer's method. The PC method using Whatman 3MM paper and ethyl acetate is a simple and fast technique to determine the radiochemical purity of 99mTc-bicisate and may be substituted for the manufacturer's recommended method to save time.

  10. Visual and colorimetric methods for rapid determination of total tannins in vegetable raw materials

    Directory of Open Access Journals (Sweden)

    S. P. Kalinkina

    2016-01-01

    Full Text Available The article is dedicated to the development of rapid colorimetric method for determining the amount of tannins in aqueous extracts of vegetable raw materials. The sorption-based colorimetric test is determining sorption tannins polyurethane foam, impregnated of FeCl3, receiving on its surface painted in black and green color of the reaction products and the determination of their in sorbent matrix. Selectivity is achieved by determining the tannins specific interaction of polyphenols with iron ions (III. The conditions of sorption-colorimetric method: the concentration of ferric chloride (III, impregnated in the polyurethane foam; sorbent mass in the analytical cartridge; degree of loading his agent; the contact time of the phases. color scales have been developed for the visual determination of the amount of tannins in terms of gallic acid. Spend a digitized image obtained scales using computer program “Sorbfil TLC”, excluding a subjective assessment of the intensity of the color scale of the test. The results obtained determine the amount of tannins in aqueous extracts of vegetable raw rapid method using tablets and analytical cartridges. The results of the test determination of tannins with visual and densitometric analytical signal registration are compared to known methods. Spend a metrological evaluation of the results of determining the amount of tannins sorption rapid colorimetric methods. Time visual and densitometric rapid determination of tannins, taking into account the sample preparation is 25–30 minutes, the relative error does not exceed 28 %. The developed test methods for quantifying the content of tannins allow to exclude the use of sophisticated analytical equipment, carry out the analysis in non-laboratory conditions do not require highly skilled personnel.

  11. Combination of culture-independent and culture-dependent molecular methods for the determination of bacterial community of iru, a fermented Parkia biglobosa seeds.

    Directory of Open Access Journals (Sweden)

    Gbenga Adedeji Adewumi

    2013-01-01

    Full Text Available In this study, bacterial composition of iru produced by natural, uncontrolled fermentation of Parkia biglobosa seeds was assessed using culture-independent method in combination with culture-based genotypic typing techniques. PCR-denaturing gradient gel electrophoresis (DGGE revealed similarity in DNA fragments with the two DNA extraction methods used and confirmed bacterial diversity in the sixteen iru samples from different production regions. DNA sequencing of the highly variable V3 region of the 16S rRNA genes obtained from PCR-DGGE identified species related to Bacillus subtilis as consistent bacterial species in the fermented samples, while other major bands were identified as close relatives of Staphylococcus vitulinus, Morganella morganii, B. thuringiensis, Staphylococcus saprophyticus, Tetragenococcus halophilus, Ureibacillus thermosphaericus, Brevibacillus parabrevis, Salinicoccus jeotgali, Brevibacterium sp. and Uncultured bacteria clones. Bacillus species were cultured as potential starter cultures and clonal relationship of different isolates determined using amplified ribosomal DNA restriction analysis (ARDRA combined with 16S-23S rRNA gene internal transcribed spacer (ITS PCR amplification, restriction analysis (ITS-PCR-RFLP and randomly amplified polymorphic DNA (RAPD-PCR. This further discriminated Bacillus subtilis and its variants from food-borne pathogens such as Bacillus cereus and suggested the need for development of controlled fermentation processes and good manufacturing practices (GMP for iru production to achieve product consistency, safety quality and improved shelf life.

  12. A rapid method for soil cement design : Louisiana slope value method : part II : evaluation.

    Science.gov (United States)

    1966-05-01

    This report is an evaluation of the recently developed "Louisiana Slope Value Method". : The conclusion drawn are based on data from 637 separate samples representing nearly all major soil groups in Louisiana that are suitable for cement stabilizatio...

  13. Melting Temperature Mapping Method: A Novel Method for Rapid Identification of Unknown Pathogenic Microorganisms within Three Hours of Sample Collection.

    Science.gov (United States)

    Niimi, Hideki; Ueno, Tomohiro; Hayashi, Shirou; Abe, Akihito; Tsurue, Takahiro; Mori, Masashi; Tabata, Homare; Minami, Hiroshi; Goto, Michihiko; Akiyama, Makoto; Yamamoto, Yoshihiro; Saito, Shigeru; Kitajima, Isao

    2015-07-28

    Acquiring the earliest possible identification of pathogenic microorganisms is critical for selecting the appropriate antimicrobial therapy in infected patients. We herein report the novel "melting temperature (Tm) mapping method" for rapidly identifying the dominant bacteria in a clinical sample from sterile sites. Employing only seven primer sets, more than 100 bacterial species can be identified. In particular, using the Difference Value, it is possible to identify samples suitable for Tm mapping identification. Moreover, this method can be used to rapidly diagnose the absence of bacteria in clinical samples. We tested the Tm mapping method using 200 whole blood samples obtained from patients with suspected sepsis, 85% (171/200) of which matched the culture results based on the detection level. A total of 130 samples were negative according to the Tm mapping method, 98% (128/130) of which were also negative based on the culture method. Meanwhile, 70 samples were positive according to the Tm mapping method, and of the 59 suitable for identification, 100% (59/59) exhibited a "match" or "broad match" with the culture or sequencing results. These findings were obtained within three hours of whole blood collection. The Tm mapping method is therefore useful for identifying infectious diseases requiring prompt treatment.

  14. 3D virtual human rapid modeling method based on top-down modeling mechanism

    Directory of Open Access Journals (Sweden)

    LI Taotao

    2017-01-01

    Full Text Available Aiming to satisfy the vast custom-made character demand of 3D virtual human and the rapid modeling in the field of 3D virtual reality, a new virtual human top-down rapid modeling method is put for-ward in this paper based on the systematic analysis of the current situation and shortage of the virtual hu-man modeling technology. After the top-level realization of virtual human hierarchical structure frame de-sign, modular expression of the virtual human and parameter design for each module is achieved gradu-al-level downwards. While the relationship of connectors and mapping restraints among different modules is established, the definition of the size and texture parameter is also completed. Standardized process is meanwhile produced to support and adapt the virtual human top-down rapid modeling practice operation. Finally, the modeling application, which takes a Chinese captain character as an example, is carried out to validate the virtual human rapid modeling method based on top-down modeling mechanism. The result demonstrates high modelling efficiency and provides one new concept for 3D virtual human geometric mod-eling and texture modeling.

  15. Development of a loop-mediated isothermal amplification method for rapid detection of pigeon circovirus.

    Science.gov (United States)

    Tsai, Shinn Shyong; Chang, Yeng Ling; Huang, Yen Li; Liu, Hung Jen; Ke, Guan Ming; Chiou, Chwei Jang; Hsieh, Yao Ching; Chang, Tsung Chou; Cheng, Li Ting; Chuang, Kuo Pin

    2014-05-01

    There are no effective antiviral treatments for pigeon circovirus (PiCV); thus, rapid diagnosis is critical for effective control of the disease caused by this virus. The recent development of a novel LAMP technique that amplifies nucleic acids rapidly with high specificity and sensitivity under isothermal conditions has overcome some of the deficiencies of nucleic-acid-based diagnostic tests. We established a LAMP method for rapid detection of PiCV using two pairs of primers that were designed from PiCV and compared its sensitivity and specificity with that of PCR. Amplification by LAMP was optimal at 63 °C for 60 min. The detection limit was nearly 0.5 pg of PiCV DNA, making it ten times more sensitive than PCR. There was no cross-reaction with porcine circovirus type 2 (PCV2), pigeon Trichomonas gallinae, or pigeon herpesvirus (PHV) under the same conditions. The assay also successfully detected the pathogen DNA in the tissues of infected pigeons. This is the first report indicating that LAMP is a valuable, rapid method of detecting PiCV with high sensitivity and specificity.

  16. A new alginate-based rapid method for determining coliforms in milk.

    Science.gov (United States)

    Chang, Su-sen; Gray, Peter M; Woo, Gun-Jo; Kang, Dong-Hyun

    2003-11-01

    A new rapid method for monitoring coliforms was developed on the basis of the instant gelling effects of alginate and calcium. The effectiveness of this new method in the detection of coliforms was evaluated. Tests involving Escherichia coli, Enterobacter cloacae, Klebsiella pneumoniae, total coliforms in milk, cold-injured coliforms, and total coliforms in raw milk were carried out. The bacterial samples were diluted in 0.2% peptone water containing 90 mM CaCl2 and added into test tubes containing modified purple broth base medium. Coliform concentrations were determined on the basis of the time of color change and gas production in the alginate tubes. All results obtained by the alginate method correlated strongly with those obtained by the conventional violet red bile agar (VRBA) plating method. The alginate method reduced detection time by 12 to 14 h compared with the conventional VRBA plating method. The alginate method can be applied in field studies more easily than melted-agar systems can. The results of this study indicate that the alginate method is an accurate, rapid, simple, and economical way to monitor and estimate concentrations of total coliforms in food.

  17. New method for vitrifying water and other liquids by rapid cooling of their aerosols

    Science.gov (United States)

    Mayer, Erwin

    1985-07-01

    A method for the vitrification of pure liquid water and dilute aqueous solutions is described which is the only one without a liquid cryomedium for heat transfer: rapid cooling of aqueous aerosol droplets on a solid cryoplate. This method is not limited to water and aqueous solutions, but can be used for the vitrification of any liquid aerosol, the only impurity being some codeposited vapor. The method can be applied in diverse fields such as cryobiology, cryomicroscopy, and low-temperature spectroscopy of water and dilute aqueous solutions to avoid the formation of crystalline ice.

  18. Rapid simulation of electromagnetic telemetry using an axisymmetric semianalytical finite element method

    Science.gov (United States)

    Chen, Jiefu; Zeng, Shubin; Dong, Qiuzhao; Huang, Yueqin

    2017-02-01

    An axisymmetric semianalytical finite element method is proposed and employed for rapid simulations of electromagnetic telemetry in layered underground formation. In this method, the layered media is decomposed into several subdomains and the interfaces between subdomains are discretized by conventional finite elements. Then a Riccati equation based high precision integration scheme is applied to exploit the homogeneity along the vertical direction in each layer. This semianalytical finite element scheme is very efficient in modeling electromagnetic telemetry in layered formation. Numerical examples as well as a field case with water based mud as drilling fluid are given to demonstrate the validity and effectiveness of this method.

  19. RAPID METHOD FOR PLUTONIUM, AMERICIUM AND CURIUM IN VERY LARGE SOIL SAMPLES

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, S

    2007-01-08

    The analysis of actinides in environmental soil and sediment samples is very important for environmental monitoring. There is a need to measure actinide isotopes with very low detection limits. A new, rapid actinide separation method has been developed and implemented that allows the measurement of plutonium, americium and curium isotopes in very large soil samples (100-200 g) with high chemical recoveries and effective removal of matrix interferences. This method uses stacked TEVA Resin{reg_sign}, TRU Resin{reg_sign} and DGA-Resin{reg_sign} cartridges from Eichrom Technologies (Darien, IL, USA) that allows the rapid separation of plutonium (Pu), americium (Am), and curium (Cm) using a single multistage column combined with alpha spectrometry. The method combines an acid leach step and innovative matrix removal using cerium fluoride precipitation to remove the difficult soil matrix. This method is unique in that it provides high tracer recoveries and effective removal of interferences with small extraction chromatography columns instead of large ion exchange resin columns that generate large amounts of acid waste. By using vacuum box cartridge technology with rapid flow rates, sample preparation time is minimized.

  20. Monitoring the ecology of Bacillus during Daqu incubation, a fermentation starter, using culture-dependent and culture-independent methods

    NARCIS (Netherlands)

    Zheng, Y.; Zheng, X.; Han, B.Z.; Han, J.S.; Nout, M.J.R.; Chen, J.Y.

    2013-01-01

    Daqu, a traditional fermentation starter, has been used to produce attractively flavored foods such as vinegar and Chinese liquor for thousands of years. Although Bacillus spp. are one of the dominant microorganisms in Daqu, more precise information is needed to reveal why and how Bacillus became

  1. A novel sample preparation method using rapid nonheated saponification method for the determination of cholesterol in emulsified foods.

    Science.gov (United States)

    Jeong, In-Seek; Kwak, Byung-Man; Ahn, Jang-Hyuk; Leem, Donggil; Yoon, Taehyung; Yoon, Changyong; Jeong, Jayoung; Park, Jung-Min; Kim, Jin-Man

    2012-10-01

    In this study, nonheated saponification was employed as a novel, rapid, and easy sample preparation method for the determination of cholesterol in emulsified foods. Cholesterol content was analyzed using gas chromatography with a flame ionization detector (GC-FID). The cholesterol extraction method was optimized for maximum recovery from baby food and infant formula. Under these conditions, the optimum extraction solvent was 10 mL ethyl ether per 1 to 2 g sample, and the saponification solution was 0.2 mL KOH in methanol. The cholesterol content in the products was determined to be within the certified range of certified reference materials (CRMs), NIST SRM 1544 and SRM 1849. The results of the recovery test performed using spiked materials were in the range of 98.24% to 99.45% with an relative standard devitation (RSD) between 0.83% and 1.61%. This method could be used to reduce sample pretreatment time and is expected to provide an accurate determination of cholesterol in emulsified food matrices such as infant formula and baby food. A novel, rapid, and easy sample preparation method using nonheated saponification was developed for cholesterol detection in emulsified foods. Recovery tests of CRMs were satisfactory, and the recoveries of spiked materials were accurate and precise. This method was effective and decreased the time required for analysis by 5-fold compared to the official method. © 2012 Institute of Food Technologists®

  2. A Rapid and Economical Method for Efficient DNA Extraction from Diverse Soils Suitable for Metagenomic Applications.

    Directory of Open Access Journals (Sweden)

    Selvaraju Gayathri Devi

    Full Text Available A rapid, cost effective method of metagenomic DNA extraction from soil is a useful tool for environmental microbiology. The present work describes an improved method of DNA extraction namely "powdered glass method" from diverse soils. The method involves the use of sterile glass powder for cell lysis followed by addition of 1% powdered activated charcoal (PAC as purifying agent to remove humic substances. The method yielded substantial DNA (5.87 ± 0.04 μg/g of soil with high purity (A260/280: 1.76 ± 0.05 and reduced humic substances (A340: 0.047 ± 0.03. The quality of the extracted DNA was compared against five different methods based on 16S rDNA PCR amplification, BamHI digestion and validated using quantitative PCR. The digested DNA was used for a metagenomic library construction with the transformation efficiency of 4 X 106 CFU mL-1. Besides providing rapid, efficient and economical extraction of metgenomic DNA from diverse soils, this method's applicability is also demonstrated for cultivated organisms (Gram positive B. subtilis NRRL-B-201, Gram negative E. coli MTCC40, and a microalgae C. sorokiniana UTEX#1666.

  3. A Rapid and Economical Method for Efficient DNA Extraction from Diverse Soils Suitable for Metagenomic Applications.

    Science.gov (United States)

    Devi, Selvaraju Gayathri; Fathima, Anwar Aliya; Radha, Sudhakar; Arunraj, Rex; Curtis, Wayne R; Ramya, Mohandass

    2015-01-01

    A rapid, cost effective method of metagenomic DNA extraction from soil is a useful tool for environmental microbiology. The present work describes an improved method of DNA extraction namely "powdered glass method" from diverse soils. The method involves the use of sterile glass powder for cell lysis followed by addition of 1% powdered activated charcoal (PAC) as purifying agent to remove humic substances. The method yielded substantial DNA (5.87 ± 0.04 μg/g of soil) with high purity (A260/280: 1.76 ± 0.05) and reduced humic substances (A340: 0.047 ± 0.03). The quality of the extracted DNA was compared against five different methods based on 16S rDNA PCR amplification, BamHI digestion and validated using quantitative PCR. The digested DNA was used for a metagenomic library construction with the transformation efficiency of 4 X 106 CFU mL-1. Besides providing rapid, efficient and economical extraction of metgenomic DNA from diverse soils, this method's applicability is also demonstrated for cultivated organisms (Gram positive B. subtilis NRRL-B-201, Gram negative E. coli MTCC40, and a microalgae C. sorokiniana UTEX#1666).

  4. Simple and rapid method for the isolation of forskolin from Coleus forskohlii by charcoal column chromatography.

    Science.gov (United States)

    Saleem, A M; Dhasan, P B; Rafiullah, M R M

    2006-01-06

    A simple, safe, rapid and economical method was developed for the isolation of high-purity forskolin from Coleus forskohlii roots using activated charcoal as an adsorbent in a column. The elution was carried out under reduced pressure to make the process rapid. Activated charcoal acted as a reversed phase adsorbent and allowed elution of forskolin without much impurities. The residue, obtained from the eluate was purified and crystallized using different solvent mixtures to obtain pure forskolin. The forskolin isolated was analyzed and characterized by UV, IR, RP-HPLC, electrospray ionization MS, 1H NMR and 13C NMR. The yield was 0.097% w/w (RSD 5.6%). The purity was 96.9% w/w (RSD 0.3%) as determined by RP-HPLC. The present method enables researchers to produce high-purity forskolin in their labs by using common chemicals.

  5. Evaluation of methods for rapid determination of freezing point of aviation fuels

    Science.gov (United States)

    Mathiprakasam, B.

    1982-01-01

    Methods for identification of the more promising concepts for the development of a portable instrument to rapidly determine the freezing point of aviation fuels are described. The evaluation process consisted of: (1) collection of information on techniques previously used for the determination of the freezing point, (2) screening and selection of these techniques for further evaluation of their suitability in a portable unit for rapid measurement, and (3) an extensive experimental evaluation of the selected techniques and a final selection of the most promising technique. Test apparatuses employing differential thermal analysis and the change in optical transparency during phase change were evaluated and tested. A technique similar to differential thermal analysis using no reference fuel was investigated. In this method, the freezing point was obtained by digitizing the data and locating the point of inflection. Results obtained using this technique compare well with those obtained elsewhere using different techniques. A conceptual design of a portable instrument incorporating this technique is presented.

  6. Novel methods for improving rapid paper-based protein assays with gold nanoparticle detection

    OpenAIRE

    Lama, Lara

    2017-01-01

    This thesis describes methods for improving sensitivity in rapid singleplex and multiplex microarray assays. The assays utilize the optical characteristics of colloidal gold nanoparticles for the colorimetric detection of proteins. Multiplexed detection in sandwich immunoassays is limited by cross-reactivity between different detection antibodies. The cross-reactivity between antibodies can contribute to increased background noise - decreasing the Limit-of-Detection of the assay - or generate...

  7. Rapid direct methods for enumeration of specific, active bacteria in water and biofilms

    Science.gov (United States)

    McFeters, G. A.; Pyle, B. H.; Lisle, J. T.; Broadaway, S. C.

    1999-01-01

    Conventional methods for detecting indicator and pathogenic bacteria in water may underestimate the actual population due to sublethal environmental injury, inability of the target bacteria to take up nutrients and other physiological factors which reduce bacterial culturability. Rapid and direct methods are needed to more accurately detect and enumerate active bacteria. Such a methodological advance would provide greater sensitivity in assessing the microbiological safety of water and food. The principle goal of this presentation is to describe novel approaches we have formulated for the rapid and simultaneous detection of bacteria plus the determination of their physiological activity in water and other environmental samples. The present version of our method involves the concentration of organisms by membrane filtration or immunomagnetic separation and combines an intracellular fluorochrome (CTC) for assessment of respiratory activity plus fluorescent-labelled antibody detection of specific bacteria. This approach has also been successfully used to demonstrate spatial and temporal heterogeneities of physiological activities in biofilms when coupled with cryosectioning. Candidate physiological stains include those capable of determining respiratory activity, membrane potential, membrane integrity, growth rate and cellular enzymatic activities. Results obtained thus far indicate that immunomagnetic separation can provide a high degree of sensitivity in the recovery of seeded target bacteria (Escherichia coli O157:H7) in water and hamburger. The captured and stained target bacteria are then enumerated by either conventional fluorescence microscopy or ChemScan(R), a new instrument that is very sensitive and rapid. The ChemScan(R) laser scanning instrument (Chemunex, Paris, France) provides the detection of individual fluorescently labelled bacterial cells using three emission channels in less than 5 min. A high degree of correlation has been demonstrated between

  8. New multiplex PCR methods for rapid screening of genetically modified organisms in foods

    OpenAIRE

    Nelly eDatukishvili; Tamara eKutateladze; Inga eGabriadze; Kakha eBitskinashvili; Boris eVishnepolsky

    2015-01-01

    We present novel multiplex PCR methods for rapid and reliable screening of genetically modified organisms (GMOs). New designed PCR primers targeting four frequently used GMO specific sequences permitted identification of new DNA markers, in particular 141 bp fragment of cauliflower mosaic virus (CaMV) 35S promoter, 224 bp fragment of Agrobacterium tumefaciens nopaline synthase (NOS) terminator, 256 bp fragment of 5-enolppyruvylshikimate-phosphate synthase (epsps) gene and 258 bp fragment of C...

  9. A low complexity rapid molecular method for detection of Clostridium difficile in stool.

    Directory of Open Access Journals (Sweden)

    Cathal J McElgunn

    Full Text Available Here we describe a method for the detection of Clostridium difficile from stool using a novel low-complexity and rapid extraction process called Heat Elution (HE. The HE method is two-step and takes just 10 minutes, no specialist instruments are required and there is minimal hands-on time. A test method using HE was developed in conjunction with Loop-mediated Isothermal Amplification (LAMP combined with the real-time bioluminescent reporter system known as BART targeting the toxin B gene (tcdB. The HE-LAMP-BART method was evaluated in a pilot study on clinical fecal samples (tcdB(+, n = 111; tcdB(-, n= 107. The HE-LAMP-BART method showed 95.5% sensitivity and 100% specificity against a gold standard reference method using cytotoxigenic culture and also a silica-based robotic extraction followed by tcdB PCR to control for storage. From sample to result, the HE-LAMP-BART method typically took 50 minutes, whereas the PCR method took >2.5 hours. In a further study (tcdB(+, n = 47; tcdB(-, n= 28 HE-LAMP-BART was compared to an alternative commercially available LAMP-based method, Illumigene (Meridian Bioscience, OH, and yielded 87.2% sensitivity and 100% specificity for the HE-LAMP-BART method compared to 76.6% and 100%, respectively, for Illumigene against the reference method. A subset of 27 samples (tcdB(+, n = 25; tcdB(-, n= 2 were further compared between HE-LAMP-BART, Illumigene, GeneXpert (Cepheid, Sunnyvale, CA and RIDA®QUICK C. difficile Toxin A/B lateral flow rapid test (R-Biopharm, Darmstadt, Germany resulting in sensitivities of HE-LAMP-BART 92%, Illumigene 72% GeneXpert 96% and RIDAQuick 76% against the reference method. The HE-LAMP-BART method offers the advantages of molecular based approaches without the cost and complexity usually associated with molecular tests. Further, the rapid time-to-result and simple protocol means the method can be applied away from the centralized laboratory settings.

  10. Effect of method of secondary fermentation and type of base wine on physico-chemical and sensory qualities of sparkling plum wine

    Directory of Open Access Journals (Sweden)

    Vinod K Joshi

    1999-01-01

    Full Text Available Plum base wines prepared with potassium metabisulphite or sodium benzoate were converted into sparkling wine, either by `Methode Champenoise' or tank method with artificially carbonated wine serving as a control. In both the secondary fermentation methods ethanol and low temperature acclimatized yeast; Saccharomyces cerevisiae UCD-595 with optimized sugar (1.5% and di-ammonium hydrogen phosphate (0.2% were used. Both methods of sparkling wine production and the type of base wine affected the physico-chemical and sensory characteristics of the sparkling wine produced. In the secondary fermented wines, most of the physico-chemical characteristics were altered compared to that of artificially carbonated wines except volatile acidity, methanol, propanol and ethanol. Furthermore, these wines contained lower proteins, minerals and amyl alcohol than the base wine. In general, the sparkling wines produced by either of the secondary fermentation method had lower sugar, more alcohol, higher macro elements but lower Fe and Cu contents than the artificially carbonated wines. An overview of the changes occurring in the sparkling wine in comparison to artificially carbonated wine revealed that most of the changes took place due to secondary fermentation. The bottle fermented wine recorded the highest pressure, low TSS and sugars. The secondary bottle fermented wine was the best in most of the sensory qualities but needed proper acid-sugar blend of the base wine before conducting secondary fermentation. Sparkling wine made from base wine with sodium benzoate was preferred to that prepared with potassium metabisulphite. The studies showed the potential of plum fruits for production of sparkling wine.Os vinhos a base de ameixa preparado com metabisulfito de potássio ou benzoato de sódio foram convertidos em vinhos espumantes pelo método "Champenoise" ou método de tanque, usando vinho carbonatado artificialmente como controle. Em ambos métodos a fermenta

  11. Conventional rapid latex agglutination in estimation of von Willebrand factor: method revisited and potential clinical applications.

    Science.gov (United States)

    Mahat, Marianor; Abdullah, Wan Zaidah; Hussin, Che Maraina Che

    2014-01-01

    Measurement of von Willebrand factor antigen (VWF : Ag) levels is usually performed in a specialised laboratory which limits its application in routine clinical practice. So far, no commercial rapid test kit is available for VWF : Ag estimation. This paper discusses the technical aspect of latex agglutination method which was established to suit the purpose of estimating von Willebrand factor (VWF) levels in the plasma sample. The latex agglutination test can be performed qualitatively and semiquantitatively. Reproducibility, stability, linearity, limit of detection, interference, and method comparison studies were conducted to evaluate the performance of this test. Semiquantitative latex agglutination test was strongly correlated with the reference immunoturbidimetric assay (Spearman's rho = 0.946, P agglutination test and the reference assay. Using the scoring system for the rapid latex test, no agglutination is with 0% VWF : Ag (control negative), 1+ reaction is equivalent to 150% VWF : Ag (when comparing with immunoturbidimetric assay). The findings from evaluation studies suggest that latex agglutination method is suitable to be used as a rapid test kit for the estimation of VWF : Ag levels in various clinical conditions associated with high levels and low levels of VWF : Ag.

  12. A direct and rapid method to determine cyanide in urine by capillary electrophoresis.

    Science.gov (United States)

    Zhang, Qiyang; Maddukuri, Naveen; Gong, Maojun

    2015-10-02

    Cyanides are poisonous chemicals that widely exist in nature and industrial processes as well as accidental fires. Rapid and accurate determination of cyanide exposure would facilitate forensic investigation, medical diagnosis, and chronic cyanide monitoring. Here, a rapid and direct method was developed for the determination of cyanide ions in urinary samples. This technique was based on an integrated capillary electrophoresis system coupled with laser-induced fluorescence (LIF) detection. Cyanide ions were derivatized with naphthalene-2,3-dicarboxaldehyde (NDA) and a primary amine (glycine) for LIF detection. Three separate reagents, NDA, glycine, and cyanide sample, were mixed online, which secured uniform conditions between samples for cyanide derivatization and reduced the risk of precipitation formation of mixtures. Conditions were optimized; the derivatization was completed in 2-4min, and the separation was observed in 25s. The limit of detection (LOD) was 4.0nM at 3-fold signal-to-noise ratio for standard cyanide in buffer. The cyanide levels in urine samples from smokers and non-smokers were determined by using the method of standard addition, which demonstrated significant difference of cyanide levels in urinary samples from the two groups of people. The developed method was rapid and accurate, and is anticipated to be applicable to cyanide detection in waste water with appropriate modification. Published by Elsevier B.V.

  13. GSMA: Gene Set Matrix Analysis, An Automated Method for Rapid Hypothesis Testing of Gene Expression Data

    Directory of Open Access Journals (Sweden)

    Chris Cheadle

    2007-01-01

    Full Text Available Background: Microarray technology has become highly valuable for identifying complex global changes in gene expression patterns. The assignment of functional information to these complex patterns remains a challenging task in effectively interpreting data and correlating results from across experiments, projects and laboratories. Methods which allow the rapid and robust evaluation of multiple functional hypotheses increase the power of individual researchers to data mine gene expression data more efficiently.Results: We have developed (gene set matrix analysis GSMA as a useful method for the rapid testing of group-wise up- or downregulation of gene expression simultaneously for multiple lists of genes (gene sets against entire distributions of gene expression changes (datasets for single or multiple experiments. The utility of GSMA lies in its flexibility to rapidly poll gene sets related by known biological function or as designated solely by the end-user against large numbers of datasets simultaneously.Conclusions: GSMA provides a simple and straightforward method for hypothesis testing in which genes are tested by groups across multiple datasets for patterns of expression enrichment.

  14. Biochemical studies on the fermentation of cassava (Manihot utilissima Pohl. )

    Energy Technology Data Exchange (ETDEWEB)

    Oteng-Gyang, K.; Anuonye, C.C.

    1987-01-01

    Some original observations have been made on the process of cassava fermentation to produce 'foofoo', a local nigerian diet. During the period of fermentation the pH of the fermenting liquor decreases from 6.1 to 3.4 at the end of the 6th day. The change in pH is uniform throughout the fermentation period. Decreases in dry weight of the fermenting cassava have been recorded; there is a very rapid decline during the third and fourth days of fermentation. Free reducing sugars decrease drastically within the first and second days. Total sugar concentration which is an indication of the starch content of the cassava also declines with fermentation time, and more so during the third and fourth days. Protein concentration in the liquor increases very rapidly during the first and second days of fermentation. It is believed that cassava protein is converted to microbial protein.

  15. Interactive Rapid Dose Assessment Model (IRDAM): reactor-accident assessment methods. Vol. 2

    Energy Technology Data Exchange (ETDEWEB)

    Poeton, R.W.; Moeller, M.P.; Laughlin, G.J.; Desrosiers, A.E.

    1983-05-01

    As part of the continuing emphasis on emergency preparedness, the US Nuclear Regulatory Commission (NRC) sponsored the development of a rapid dose assessment system by Pacific Northwest Laboratory (PNL). This system, the Interactive Rapid Dose Assessment Model (IRDAM) is a micro-computer based program for rapidly assessing the radiological impact of accidents at nuclear power plants. This document describes the technical bases for IRDAM including methods, models and assumptions used in calculations. IRDAM calculates whole body (5-cm depth) and infant thyroid doses at six fixed downwind distances between 500 and 20,000 meters. Radionuclides considered primarily consist of noble gases and radioiodines. In order to provide a rapid assessment capability consistent with the capacity of the Osborne-1 computer, certain simplifying approximations and assumptions are made. These are described, along with default values (assumptions used in the absence of specific input) in the text of this document. Two companion volumes to this one provide additional information on IRDAM. The user's Guide (NUREG/CR-3012, Volume 1) describes the setup and operation of equipment necessary to run IRDAM. Scenarios for Comparing Dose Assessment Models (NUREG/CR-3012, Volume 3) provides the results of calculations made by IRDAM and other models for specific accident scenarios.

  16. Comparison of concentration methods for rapid detection of hookworm ova in wastewater matrices using quantitative PCR.

    Science.gov (United States)

    Gyawali, P; Ahmed, W; Jagals, P; Sidhu, J P S; Toze, S

    2015-12-01

    Hookworm infection contributes around 700 million infections worldwide especially in developing nations due to increased use of wastewater for crop production. The effective recovery of hookworm ova from wastewater matrices is difficult due to their low concentrations and heterogeneous distribution. In this study, we compared the recovery rates of (i) four rapid hookworm ova concentration methods from municipal wastewater, and (ii) two concentration methods from sludge samples. Ancylostoma caninum ova were used as surrogate for human hookworm (Ancylostoma duodenale and Necator americanus). Known concentration of A. caninum hookworm ova were seeded into wastewater (treated and raw) and sludge samples collected from two wastewater treatment plants (WWTPs) in Brisbane and Perth, Australia. The A. caninum ova were concentrated from treated and raw wastewater samples using centrifugation (Method A), hollow fiber ultrafiltration (HFUF) (Method B), filtration (Method C) and flotation (Method D) methods. For sludge samples, flotation (Method E) and direct DNA extraction (Method F) methods were used. Among the four methods tested, filtration (Method C) method was able to recover higher concentrations of A. caninum ova consistently from treated wastewater (39-50%) and raw wastewater (7.1-12%) samples collected from both WWTPs. The remaining methods (Methods A, B and D) yielded variable recovery rate ranging from 0.2 to 40% for treated and raw wastewater samples. The recovery rates for sludge samples were poor (0.02-4.7), although, Method F (direct DNA extraction) provided 1-2 orders of magnitude higher recovery rate than Method E (flotation). Based on our results it can be concluded that the recovery rates of hookworm ova from wastewater matrices, especially sludge samples, can be poor and highly variable. Therefore, choice of concentration method is vital for the sensitive detection of hookworm ova in wastewater matrices. Crown Copyright © 2015. Published by Elsevier

  17. Rapid Determination of Isomeric Benzoylpaeoniflorin and Benzoylalbiflorin in Rat Plasma by LC-MS/MS Method

    Directory of Open Access Journals (Sweden)

    Chuanqi Zhou

    2017-01-01

    Full Text Available Benzoylpaeoniflorin (BP is a potential therapeutic agent against oxidative stress related Alzheimer’s disease. In this study, a more rapid, selective, and sensitive liquid chromatography-tandem mass spectrometric (LC-MS/MS method was developed to determine BP in rat plasma distinguishing with a monoterpene isomer, benzoylalbiflorin (BA. The method showed a linear response from 1 to 1000 ng/mL (r>0.9950. The precision of the interday and intraday ranged from 2.03 to 12.48% and the accuracy values ranged from −8.00 to 10.33%. Each running of the method could be finished in 4 minutes. The LC-MS/MS method was validated for specificity, linearity, precision, accuracy, recovery, and stability and was found to be acceptable for bioanalytical application. Finally, this fully validated method was successfully applied to a pharmacokinetic study in rats following oral administration.

  18. Multifrequency excitation method for rapid and accurate dynamic test of micromachined gyroscope chips.

    Science.gov (United States)

    Deng, Yan; Zhou, Bin; Xing, Chao; Zhang, Rong

    2014-10-17

    A novel multifrequency excitation (MFE) method is proposed to realize rapid and accurate dynamic testing of micromachined gyroscope chips. Compared with the traditional sweep-frequency excitation (SFE) method, the computational time for testing one chip under four modes at a 1-Hz frequency resolution and 600-Hz bandwidth was dramatically reduced from 10 min to 6 s. A multifrequency signal with an equal amplitude and initial linear-phase-difference distribution was generated to ensure test repeatability and accuracy. The current test system based on LabVIEW using the SFE method was modified to use the MFE method without any hardware changes. The experimental results verified that the MFE method can be an ideal solution for large-scale dynamic testing of gyroscope chips and gyroscopes.

  19. Multifrequency Excitation Method for Rapid and Accurate Dynamic Test of Micromachined Gyroscope Chips

    Directory of Open Access Journals (Sweden)

    Yan Deng

    2014-10-01

    Full Text Available A novel multifrequency excitation (MFE method is proposed to realize rapid and accurate dynamic testing of micromachined gyroscope chips. Compared with the traditional sweep-frequency excitation (SFE method, the computational time for testing one chip under four modes at a 1-Hz frequency resolution and 600-Hz bandwidth was dramatically reduced from 10 min to 6 s. A multifrequency signal with an equal amplitude and initial linear-phase-difference distribution was generated to ensure test repeatability and accuracy. The current test system based on LabVIEW using the SFE method was modified to use the MFE method without any hardware changes. The experimental results verified that the MFE method can be an ideal solution for large-scale dynamic testing of gyroscope chips and gyroscopes.

  20. A Microfluidic Channel Method for Rapid Drug-Susceptibility Testing of Pseudomonas aeruginosa

    Science.gov (United States)

    Matsumoto, Yoshimi; Grushnikov, Andrey; Kikuchi, Kazuma; Noji, Hiroyuki; Yamaguchi, Akihito; Yagi, Yasushi

    2016-01-01

    The recent global increase in the prevalence of antibiotic-resistant bacteria and lack of development of new therapeutic agents emphasize the importance of selecting appropriate antimicrobials for the treatment of infections. However, to date, the development of completely accelerated drug susceptibility testing methods has not been achieved despite the availability of a rapid identification method. We proposed an innovative rapid method for drug susceptibility testing for Pseudomonas aeruginosa that provides results within 3 h. The drug susceptibility testing microfluidic (DSTM) device was prepared using soft lithography. It consisted of five sets of four microfluidic channels sharing one inlet slot, and the four channels are gathered in a small area, permitting simultaneous microscopic observation. Antimicrobials were pre-introduced into each channel and dried before use. Bacterial suspensions in cation-adjusted Mueller–Hinton broth were introduced from the inlet slot and incubated for 3 h. Susceptibilities were microscopically evaluated on the basis of differences in cell numbers and shapes between drug-treated and control cells, using dedicated software. The results of 101 clinically isolated strains of P. aeruginosa obtained using the DSTM method strongly correlated with results obtained using the ordinary microbroth dilution method. Ciprofloxacin, meropenem, ceftazidime, and piperacillin caused elongation in susceptible cells, while meropenem also induced spheroplast and bulge formation. Morphological observation could alternatively be used to determine the susceptibility of P. aeruginosa to these drugs, although amikacin had little effect on cell shape. The rapid determination of bacterial drug susceptibility using the DSTM method could also be applicable to other pathogenic species, and it could easily be introduced into clinical laboratories without the need for expensive instrumentation. PMID:26872134

  1. A Microfluidic Channel Method for Rapid Drug-Susceptibility Testing of Pseudomonas aeruginosa.

    Directory of Open Access Journals (Sweden)

    Yoshimi Matsumoto

    Full Text Available The recent global increase in the prevalence of antibiotic-resistant bacteria and lack of development of new therapeutic agents emphasize the importance of selecting appropriate antimicrobials for the treatment of infections. However, to date, the development of completely accelerated drug susceptibility testing methods has not been achieved despite the availability of a rapid identification method. We proposed an innovative rapid method for drug susceptibility testing for Pseudomonas aeruginosa that provides results within 3 h. The drug susceptibility testing microfluidic (DSTM device was prepared using soft lithography. It consisted of five sets of four microfluidic channels sharing one inlet slot, and the four channels are gathered in a small area, permitting simultaneous microscopic observation. Antimicrobials were pre-introduced into each channel and dried before use. Bacterial suspensions in cation-adjusted Mueller-Hinton broth were introduced from the inlet slot and incubated for 3 h. Susceptibilities were microscopically evaluated on the basis of differences in cell numbers and shapes between drug-treated and control cells, using dedicated software. The results of 101 clinically isolated strains of P. aeruginosa obtained using the DSTM method strongly correlated with results obtained using the ordinary microbroth dilution method. Ciprofloxacin, meropenem, ceftazidime, and piperacillin caused elongation in susceptible cells, while meropenem also induced spheroplast and bulge formation. Morphological observation could alternatively be used to determine the susceptibility of P. aeruginosa to these drugs, although amikacin had little effect on cell shape. The rapid determination of bacterial drug susceptibility using the DSTM method could also be applicable to other pathogenic species, and it could easily be introduced into clinical laboratories without the need for expensive instrumentation.

  2. Fermentation Industry.

    Science.gov (United States)

    Grady, C. P. L., Jr.; Grady, J. K.

    1978-01-01

    Presents a literature review of wastes from the fermentation industry, covering publications of 1976-77. This review focuses on: (1) alcoholic beverage production; (2) pharmaceuticals and biochemicals production; and (3) biomass production. A list of 62 references is also presented. (HM)

  3. Adjustment of a rapid method for quantification of Fusarium spp. spore suspensions in plant pathology.

    Science.gov (United States)

    Caligiore-Gei, Pablo F; Valdez, Jorge G

    2015-01-01

    The use of a Neubauer chamber is a broadly employed method when cell suspensions need to be quantified. However, this technique may take a long time and needs trained personnel. Spectrophotometry has proved to be a rapid, simple and accurate method to estimate the concentration of spore suspensions of isolates of the genus Fusarium. In this work we present a linear formula to relate absorbance measurements at 530nm with the number of microconidia/ml in a suspension. Copyright © 2014 Asociación Argentina de Microbiología. Publicado por Elsevier España, S.L.U. All rights reserved.

  4. Rapid method for protein quantitation by Bradford assay after elimination of the interference of polysorbate 80.

    Science.gov (United States)

    Cheng, Yongfeng; Wei, Haiming; Sun, Rui; Tian, Zhigang; Zheng, Xiaodong

    2016-02-01

    Bradford assay is one of the most common methods for measuring protein concentrations. However, some pharmaceutical excipients, such as detergents, interfere with Bradford assay even at low concentrations. Protein precipitation can be used to overcome sample incompatibility with protein quantitation. But the rate of protein recovery caused by acetone precipitation is only about 70%. In this study, we found that sucrose not only could increase the rate of protein recovery after 1 h acetone precipitation, but also did not interfere with Bradford assay. So we developed a method for rapid protein quantitation in protein drugs even if they contained interfering substances. Copyright © 2015 Elsevier Inc. All rights reserved.

  5. Comparison of the NIDS® rapid assay with ELISA methods in immunogenicity testing of two biotherapeutics.

    Science.gov (United States)

    Pan, Jing; Small, Thomas; Qin, Dujie; Li, Shawn; Wang, Li; Chen, Dave; Pauley, Cindy; Verch, Thorsten; Kaplanski, Catherine; Bakhtiar, Ray; Vallejo, Yli Remo; Yin, Ray

    2011-01-01

    Rapid lateral flow immunogenicity assays for the detection of anti-drug antibodies (ADAs) to two biotherapeutic antibodies, an anti-HER2 antibody and an anti-TNF-α antibody, were developed using ANP Technologies, Inc.'s proprietary Nano-Intelligent Detection System (NIDS®) and compared to their ELISA counterparts. Biotin and hapten-labeled drugs are incubated with the patient serum sample to allow ADA to form a bridge complex with each drug conjugate. The reaction mixture is then added to a test strip with an anti-hapten capture zone which captures the mixed bridge complex. The bridge-complexed biotinylated drug then reacts with streptavidin-labeled gold particles in situ. The signal developed at the capture zone, which is directly proportional to ADA in the sample, is then quantitatively measured with a handheld reader. The counterpart ELISAs were run using the same reagents. Dose-response, specificity/free drug depletion, and screening cut-point assays were performed using both methods. The rapid assays' performance compare very closely to their ELISA counterparts'. Both types of assays identified the same positive samples in screening a limited population of 50 normal serum samples for the anti-HER2 antibody. In the case of anti-TNF-α, both assays identified the same positive samples out of 50 normal and 20 rheumatoid arthritis patient serum samples but differed in the assessment of two others. The rapid assay correctly identified as negative an ELISA false positive sample, and correctly tested as positive an ELISA false negative sample. Positive results were verified with a specificity/free drug depletion assay. The NIDS® rapid immunogenicity assay offers distinct advantages over current methods in simplicity, low cost, and short time to result. More importantly, the method requires no sample dilution and no washing steps which can perturb fragile complexes formed by low-affinity ADAs. Thus, the assay can potentially detect ADAs with various affinities

  6. A novel rapid and reproducible flow cytometric method for optimization of transfection efficiency in cells

    Science.gov (United States)

    Homann, Stefanie; Hofmann, Christian; Gorin, Aleksandr M.; Nguyen, Huy Cong Xuan; Huynh, Diana; Hamid, Phillip; Maithel, Neil; Yacoubian, Vahe; Mu, Wenli; Kossyvakis, Athanasios; Sen Roy, Shubhendu; Yang, Otto Orlean

    2017-01-01

    Transfection is one of the most frequently used techniques in molecular biology that is also applicable for gene therapy studies in humans. One of the biggest challenges to investigate the protein function and interaction in gene therapy studies is to have reliable monospecific detection reagents, particularly antibodies, for all human gene products. Thus, a reliable method that can optimize transfection efficiency based on not only expression of the target protein of interest but also the uptake of the nucleic acid plasmid, can be an important tool in molecular biology. Here, we present a simple, rapid and robust flow cytometric method that can be used as a tool to optimize transfection efficiency at the single cell level while overcoming limitations of prior established methods that quantify transfection efficiency. By using optimized ratios of transfection reagent and a nucleic acid (DNA or RNA) vector directly labeled with a fluorochrome, this method can be used as a tool to simultaneously quantify cellular toxicity of different transfection reagents, the amount of nucleic acid plasmid that cells have taken up during transfection as well as the amount of the encoded expressed protein. Finally, we demonstrate that this method is reproducible, can be standardized and can reliably and rapidly quantify transfection efficiency, reducing assay costs and increasing throughput while increasing data robustness. PMID:28863132

  7. A Rapid and Economical Method for Efficient DNA Extraction from Diverse Soils Suitable for Metagenomic Applications

    Science.gov (United States)

    Devi, Selvaraju Gayathri; Fathima, Anwar Aliya; Radha, Sudhakar; Arunraj, Rex; Curtis, Wayne R.; Ramya, Mohandass

    2015-01-01

    A rapid, cost effective method of metagenomic DNA extraction from soil is a useful tool for environmental microbiology. The present work describes an improved method of DNA extraction namely “powdered glass method” from diverse soils. The method involves the use of sterile glass powder for cell lysis followed by addition of 1% powdered activated charcoal (PAC) as purifying agent to remove humic substances. The method yielded substantial DNA (5.87 ± 0.04 μg/g of soil) with high purity (A260/280: 1.76 ± 0.05) and reduced humic substances (A340: 0.047 ± 0.03). The quality of the extracted DNA was compared against five different methods based on 16S rDNA PCR amplification, BamHI digestion and validated using quantitative PCR. The digested DNA was used for a metagenomic library construction with the transformation efficiency of 4 X 106 CFU mL-1. Besides providing rapid, efficient and economical extraction of metgenomic DNA from diverse soils, this method’s applicability is also demonstrated for cultivated organisms (Gram positive B. subtilis NRRL-B-201, Gram negative E. coli MTCC40, and a microalgae C. sorokiniana UTEX#1666). PMID:26167854

  8. New modelling method for fast reactor neutronic behaviours analysis; Nouvelles methodes de modelisation neutronique des reacteurs rapides de quatrieme Generation

    Energy Technology Data Exchange (ETDEWEB)

    Jacquet, P.

    2011-05-23

    Due to safety rules running on fourth generation reactors' core development, neutronics simulation tools have to be as accurate as never before. First part of this report enumerates every step of fast reactor's neutronics simulation implemented in current reference code: ECCO. Considering the field of fast reactors that meet criteria of fourth generation, ability of models to describe self-shielding phenomenon, to simulate neutrons leakage in a lattice of fuel assemblies and to produce representative macroscopic sections is evaluated. The second part of this thesis is dedicated to the simulation of fast reactors' core with steel reflector. These require the development of advanced methods of condensation and homogenization. Several methods are proposed and compared on a typical case: the ZONA2B core of MASURCA reactor. (author) [French] Les criteres de surete qui regissent le developpement de coeurs de reacteurs de quatrieme generation implique l'usage d'outils de calcul neutronique performants. Une premiere partie de la these reprend toutes les etapes de modelisation neutronique des reacteurs rapides actuellement d'usage dans le code de reference ECCO. La capacite des modeles a decrire le phenomene d'autoprotection, a representer les fuites neutroniques au niveau d'un reseau d'assemblages combustibles et a generer des sections macroscopiques representatives est appreciee sur le domaine des reacteurs rapides innovants respectant les criteres de quatrieme generation. La deuxieme partie de ce memoire se consacre a la modelisation des coeurs rapides avec reflecteur acier. Ces derniers necessitent le developpement de methodes avancees de condensation et d'homogenisation. Plusieurs methodes sont proposees et confrontees sur un probleme de modelisation typique: le coeur ZONA2B du reacteur maquette MASURCA

  9. A rapid Salmonella detection method involving thermophilic helicase-dependent amplification and a lateral flow assay.

    Science.gov (United States)

    Du, Xin-Jun; Zhou, Tian-Jiao; Li, Ping; Wang, Shuo

    2017-08-01

    Salmonella is a major foodborne pathogen that is widespread in the environment and can cause serious human and animal disease. Since conventional culture methods to detect Salmonella are time-consuming and laborious, rapid and accurate techniques to detect this pathogen are critically important for food safety and diagnosing foodborne illness. In this study, we developed a rapid, simple and portable Salmonella detection strategy that combines thermophilic helicase-dependent amplification (tHDA) with a lateral flow assay to provide a detection result based on visual signals within 90 min. Performance analyses indicated that the method had detection limits for DNA and pure cultured bacteria of 73.4-80.7 fg and 35-40 CFU, respectively. Specificity analyses showed no cross reactions with Escherichia coli, Staphylococcus aureus, Listeria monocytogenes, Enterobacter aerogenes, Shigella and Campylobacter jejuni. The results for detection in real food samples showed that 1.3-1.9 CFU/g or 1.3-1.9 CFU/mL of Salmonella in contaminated chicken products and infant nutritional cereal could be detected after 2 h of enrichment. The same amount of Salmonella in contaminated milk could be detected after 4 h of enrichment. This tHDA-strip can be used for the rapid detection of Salmonella in food samples and is particularly suitable for use in areas with limited equipment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Rapid methods to detect organic mercury and total selenium in biological samples

    Directory of Open Access Journals (Sweden)

    Basu Niladri

    2011-01-01

    Full Text Available Abstract Background Organic mercury (Hg is a global pollutant of concern and selenium is believed to afford protection against mercury risk though few approaches exist to rapidly assess both chemicals in biological samples. Here, micro-scale and rapid methods to detect organic mercury ( Results For organic Hg, samples are digested using Tris-HCl buffer (with sequential additions of protease, NaOH, cysteine, CuSO4, acidic NaBr followed by extraction with toluene and Na2S2O3. The final product is analyzed via commercially available direct/total mercury analyzers. For Se, a fluorometric assay has been developed for microplate readers that involves digestion (HNO3-HClO4 and HCl, conjugation (2,3-diaminonaphthalene, and cyclohexane extraction. Recovery of organic Hg (86-107% and Se (85-121% were determined through use of Standard Reference Materials and lemon shark kidney tissues. Conclusions The approaches outlined provide an easy, rapid, reproducible, and cost-effective platform for monitoring organic Hg and total Se in biological samples. Owing to the importance of organic Hg and Se in the pathophysiology of Hg, integration of such methods into established research monitoring efforts (that largely focus on screening total Hg only will help increase understanding of Hg's true risks.

  11. Quantitation & Case-Study-Driven Inquiry to Enhance Yeast Fermentation Studies

    Science.gov (United States)

    Grammer, Robert T.

    2012-01-01

    We propose a procedure for the assay of fermentation in yeast in microcentrifuge tubes that is simple and rapid, permitting assay replicates, descriptive statistics, and the preparation of line graphs that indicate reproducibility. Using regression and simple derivatives to determine initial velocities, we suggest methods to compare the effects of…

  12. Fermentation Process Modeling with Levenberg-Marquardt Algorithm and Runge-Kutta Method on Ethanol Production by Saccharomyces cerevisiae

    Directory of Open Access Journals (Sweden)

    Dengfeng Liu

    2014-01-01

    Full Text Available The core of the Chinese rice wine making is a typical simultaneous saccharification and fermentation (SSF process. In order to control and optimize the SSF process of Chinese rice wine brewing, it is necessary to construct kinetic model and study the influence of temperature on the Chinese rice wine brewing process. An unstructured kinetic model containing 12 kinetics parameters was developed and used to describe the changing of kinetic parameters in Chinese rice wine fermentation at 22, 26, and 30°C. The effects of substrate and product inhibitions were included in the model, and four variable, including biomass, ethanol, sugar and substrate were considered. The R-square values for the model are all above 0.95 revealing that the model prediction values could match experimental data very well. Our model conceivably contributes significantly to the improvement of the industrial process for the production of Chinese rice wine.

  13. High-yield fermentation and a novel heat-precipitation purification method for hydrophobin HGFI from Grifola frondosa in Pichia pastoris.

    Science.gov (United States)

    Song, Dongmin; Gao, Zhendong; Zhao, Liqiang; Wang, Xiangxiang; Xu, Haijin; Bai, Yanling; Zhang, Xiuming; Linder, Markus B; Feng, Hui; Qiao, Mingqiang

    2016-12-01

    Hydrophobins are proteins produced by filamentous fungi with high natural-surfactant activities and that can self-assemble in interfaces of air-water or solid-water to form amphiphilic membranes. Here, we reported a high-yield fermentation method for hydrophobin HGFI from Grifola frondosa in Pichia pastoris, attaining production of 300 mg/L by keeping the dissolved oxygen level at 15%-25% by turning the methanol-feeding speed. We also developed a novel HGFI-purification method enabling large-scare purification of HGFI, with >90% recovery. Additionally, we observed that hydrophobin HGFI in fermentation broth precipitated at pH 90 °C. We also identified the structure and properties of proteins purified by this method through atomic force microscopy, circular dichroism, X-ray photoelectron spectroscopy, and water-contact angle measurement, which is similar to protein purification by ultrafiltration without heating treatment that enables our method to maintain native HGFI structure and properties. Furthermore, the purification method presented here can be applied to large-scale purification of other type I hydrophobins. Copyright © 2016. Published by Elsevier Inc.

  14. Application of rapid cloud point extraction method for trace cobalt analysis coupled with spectrophotometric determination

    Science.gov (United States)

    Wen, Xiaodong; He, Lei; Shi, Chunsheng; Deng, Qingwen; Wang, Jiwei; Zhao, Xia

    2013-11-01

    In this work, the analytical performance of conventional spectrophotometer was improved through the coupling of effective preconcentration method with spectrophotometric determination. Rapidly synergistic cloud point extraction (RS-CPE) was used to pre-concentrate ultra trace cobalt and firstly coupled with spectrophotometric determination. The developed coupling was simple, rapid and efficient. The factors influencing RS-CPE and spectrophotometer were optimized. Under the optimal conditions, the limit of detection (LOD) was 0.6 μg L-1, with sensitivity enhancement factor of 23. The relative standard deviation (RSD) for seven replicate measurements of 50 μg L-1 of cobalt was 4.3%. The recoveries for the spiked samples were in the acceptable range of 93.8-105%.

  15. A rapid and direct real time PCR-based method for identification of Salmonella spp

    DEFF Research Database (Denmark)

    Rodriguez-Lazaro, D.; Hernández, Marta; Esteve, T.

    2003-01-01

    The aim of this work was the validation of a rapid, real-time PCR assay based on TaqMan((R)) technology for the unequivocal identification of Salmonella spp. to be used directly on an agar-grown colony. A real-time PCR system targeting at the Salmonella spp. invA gene was optimized and validated...... to be especially convenient because the pre-mix containing all PCR reagents except for the bacterial cells could be kept at -20 degreesC for at least I month before its use. The optimized TaqMan((R)) real-time PCR assay is a useful, simple and rapid method for routine identification of Salmonella spp...

  16. A rapid method for counting nucleated erythrocytes on stained blood smears by digital image analysis

    Science.gov (United States)

    Gering, E.; Atkinson, C.T.

    2004-01-01

    Measures of parasitemia by intraerythrocytic hematozoan parasites are normally expressed as the number of infected erythrocytes per n erythrocytes and are notoriously tedious and time consuming to measure. We describe a protocol for generating rapid counts of nucleated erythrocytes from digital micrographs of thin blood smears that can be used to estimate intensity of hematozoan infections in nonmammalian vertebrate hosts. This method takes advantage of the bold contrast and relatively uniform size and morphology of erythrocyte nuclei on Giemsa-stained blood smears and uses ImageJ, a java-based image analysis program developed at the U.S. National Institutes of Health and available on the internet, to recognize and count these nuclei. This technique makes feasible rapid and accurate counts of total erythrocytes in large numbers of microscope fields, which can be used in the calculation of peripheral parasitemias in low-intensity infections.

  17. [Three-Iindex-Value Method for Rapid Screening Unqualified Vegetable Oil].

    Science.gov (United States)

    He, Wen-xuan; Hong, Gui-shui; Fang, Run; Cai, Xian-chun; Huang, Sheng

    2015-04-01

    In the present study, by measuring the A3 005 (representing unsaturation), A985 (representing conjugated fatty acids), A960 + A985 (representing trans-fatty acid ) of southern common vegetable oils (peanut oil, corn oil, canola oil, soybean oil, sunflower oil, tea seed oil and olive oil), "waste oil" and overdue vegetable oils, the pass-setting-range of these three index values for the vegetable oils was obtained. On this basis, a method for rapid screening unqualified vegetable oil (expired, adding low-cost oil, adding "waste oil") was established. The method effectively improved the monitoring efficiency of vegetable oil. With this method of screening a number of suspected substandard oils were proved unqualified by determination of fatty acid composition and 11, 12, 13, 17 fatty acid content. Through the combination of several detection methods, the causes for disqualification of vegetable oils can be further inferred.

  18. New rapid DNA extraction method with Chelex from Venturia inaequalis spores.

    Science.gov (United States)

    Turan, Ceren; Nanni, Irene Maja; Brunelli, Agostino; Collina, Marina

    2015-08-01

    The objective of this study was to develop a rapid method to isolate DNA from Venturia inaequalis spores for use in diagnostic DNA mutation analysis. Chelex-100 resin was evaluated and compared with a well established DNA exctraction method, utilizing CTAB in order to have a robust comparison. In this research we demonstrated that Chelex-100 efficiently makes extraction of the DNA from V. inaequalis spores available for direct use in molecular analyses. Also, the quantity and quality of extracted DNA were shown to be adequate for PCR analysis. Comparatively, the quality of DNA samples isolated using Chelex method was better than those extracted using CTAB. In conclusion, the Chelex method is recommended for PCR experiments considering its simplicity and cost-effectiveness. Copyright © 2015. Published by Elsevier B.V.

  19. Rapid and sensitive liquid chromatography-mass spectrometry method for determination of ropinirole in human plasma.

    Science.gov (United States)

    Bhatt, Jignesh; Jangid, Arvind; Shetty, Raghavendra; Shah, Bhavin; Kambli, Sandeep; Subbaiah, Gunta; Singh, Sadhana

    2006-03-18

    A rapid and robust liquid chromatography-mass spectrometry (LC-MS/MS) method was developed for non-ergoline dopamine D(2)-receptor agonist, ropinirole in human plasma using Es-citalopram oxalate as an internal standard. The method involves solid phase extraction from plasma, reversed-phase simple isocratic chromatographic conditions and mass spectrometric detection that enables a detection limit at picogram levels. The proposed method was validated with linear range of 20-1,200 pg/ml. The extraction recoveries for ropinirole and internal standard were 90.45 and 65.42%, respectively. The R.S.D.% of intra-day and inter-day assay was lower than 15%. For its sensitivity and reliability, the proposed method is particularly suitable for pharmacokinetic studies.

  20. Simple and rapid methods for detecting Salmonella enteritidis in raw eggs.

    Science.gov (United States)

    Seo, Kun-Ho; Holt, Peter S; Stone, Henry D; Gast, Richard K

    2003-10-15

    The Centers for Disease Control and Prevention estimates there were 300,000 cases of Salmonella enteritidis (SE) in 1997. Egg products were associated with many of the cases. To address this problem, many producers implemented flock surveillance of the SE situation at their facilities. A rapid and simple method for detecting SE from poultry samples is critical for the effective implementation of such testing strategies. A lateral flow device for the detection of SE utilized in this study was manufactured by Neogen, Lansing, MI. The test panel is a presumptive qualitative test system that detects only members of Group D1 Salmonella species. A series of studies were conducted to optimize the test procedure for raw eggs with different sample preparations. A novel antigen extraction method was developed for use with the test panel kit. The detection limit of the test panel kit was increased approximately tenfold when the extraction method was used. Detection of SE was 100% in raw egg pools inoculated with 10 SE cells per ml of egg and incubated at a 1:10 ratio in buffered peptone water (BPW) or tetrathionate brilliant green broth (TBG) for 24 h at 37 degrees C. The developed lateral flow test kit could provide a simple, rapid, and inexpensive method for egg producers and processors to test specifically for Salmonella group D1 serovars, such as SE, in egg samples.

  1. Note: Non-invasive optical method for rapid determination of alignment degree of oriented nanofibrous layers

    Energy Technology Data Exchange (ETDEWEB)

    Pokorny, M.; Rebicek, J. [R& D Department, Contipro Biotech s.r.o., 561 02 Dolni Dobrouc (Czech Republic); Klemes, J. [R& D Department, Contipro Pharma a.s., 561 02 Dolni Dobrouc (Czech Republic); Kotzianova, A. [R& D Department, Contipro Pharma a.s., 561 02 Dolni Dobrouc (Czech Republic); Department of Chemistry, Faculty of Science, Masaryk University, Kamenice 5, CZ-62500 Brno (Czech Republic); Velebny, V. [R& D Department, Contipro Biotech s.r.o., 561 02 Dolni Dobrouc (Czech Republic); R& D Department, Contipro Pharma a.s., 561 02 Dolni Dobrouc (Czech Republic)

    2015-10-15

    This paper presents a rapid non-destructive method that provides information on the anisotropic internal structure of nanofibrous layers. A laser beam of a wavelength of 632.8 nm is directed at and passes through a nanofibrous layer prepared by electrostatic spinning. Information about the structural arrangement of nanofibers in the layer is directly visible in the form of a diffraction image formed on a projection screen or obtained from measured intensities of the laser beam passing through the sample which are determined by the dependency of the angle of the main direction of polarization of the laser beam on the axis of alignment of nanofibers in the sample. Both optical methods were verified on Polyvinyl alcohol (PVA) nanofibrous layers (fiber diameter of 470 nm) with random, single-axis aligned and crossed structures. The obtained results match the results of commonly used methods which apply the analysis of electron microscope images. The presented simple method not only allows samples to be analysed much more rapidly and without damaging them but it also makes possible the analysis of much larger areas, up to several square millimetres, at the same time.

  2. Rapid intrinsic fluorescence method for direct identification of pathogens in blood cultures.

    Science.gov (United States)

    Walsh, John D; Hyman, Jay M; Borzhemskaya, Larisa; Bowen, Ann; McKellar, Caroline; Ullery, Michael; Mathias, Erin; Ronsick, Christopher; Link, John; Wilson, Mark; Clay, Bradford; Robinson, Ron; Thorpe, Thurman; van Belkum, Alex; Dunne, W Michael

    2013-11-19

    A positive blood culture is a critical result that requires prompt identification of the causative agent. This article describes a simple method to identify microorganisms from positive blood culture broth within the time taken to perform a Gram stain (identification of the etiologic agent may benefit the clinical management of sepsis. Further evaluation is now warranted to determine the performance of the method using clinical blood culture specimens. Physicians often require the identity of the infective agent in order to make life-saving adjustments to empirical therapy or to switch to less expensive and/or more targeted antimicrobials. However, standard identification procedures take up to 2 days after a blood culture is signaled positive, and even most rapid molecular techniques take several hours to provide a result. Other techniques are faster (e.g., matrix-assisted laser desorption ionization-time of flight [MALDI-TOF] mass spectrometry) but require time-consuming manual processing steps and expensive equipment. There remains a clear need for a simple, inexpensive method to rapidly identify microorganisms directly from positive blood cultures. The promising new method described in this research article can identify microorganisms in minutes by optical spectroscopy, thus permitting the lab to simultaneously report the presence of a positive blood culture and the organism's identity.

  3. Use of refractometry and colorimetry as field methods to rapidly assess antimalarial drug quality.

    Science.gov (United States)

    Green, Michael D; Nettey, Henry; Villalva Rojas, Ofelia; Pamanivong, Chansapha; Khounsaknalath, Lamphet; Grande Ortiz, Miguel; Newton, Paul N; Fernández, Facundo M; Vongsack, Latsamy; Manolin, Ot

    2007-01-04

    The proliferation of counterfeit and poor-quality drugs is a major public health problem; especially in developing countries lacking adequate resources to effectively monitor their prevalence. Simple and affordable field methods provide a practical means of rapidly monitoring drug quality in circumstances where more advanced techniques are not available. Therefore, we have evaluated refractometry, colorimetry and a technique combining both processes as simple and accurate field assays to rapidly test the quality of the commonly available antimalarial drugs; artesunate, chloroquine, quinine, and sulfadoxine. Method bias, sensitivity, specificity and accuracy relative to high-performance liquid chromatographic (HPLC) analysis of drugs collected in the Lao PDR were assessed for each technique. The HPLC method for each drug was evaluated in terms of assay variability and accuracy. The accuracy of the combined method ranged from 0.96 to 1.00 for artesunate tablets, chloroquine injectables, quinine capsules, and sulfadoxine tablets while the accuracy was 0.78 for enterically coated chloroquine tablets. These techniques provide a generally accurate, yet simple and affordable means to assess drug quality in resource-poor settings.

  4. A two-step method for rapid characterization of electroosmotic flows in capillary electrophoresis.

    Science.gov (United States)

    Zhang, Wenjing; He, Muyi; Yuan, Tao; Xu, Wei

    2017-12-01

    The measurement of electroosmotic flow (EOF) is important in a capillary electrophoresis (CE) experiment in terms of performance optimization and stability improvement. Although several methods exist, there are demanding needs to accurately characterize ultra-low electroosmotic flow rates (EOF rates), such as in coated capillaries used in protein separations. In this work, a new method, called the two-step method, was developed to accurately and rapidly measure EOF rates in a capillary, especially for measuring the ultra-low EOF rates in coated capillaries. In this two-step method, the EOF rates were calculated by measuring the migration time difference of a neutral marker in two consecutive experiments, in which a pressure driven was introduced to accelerate the migration and the DC voltage was reversed to switch the EOF direction. Uncoated capillaries were first characterized by both this two-step method and a conventional method to confirm the validity of this new method. Then this new method was applied in the study of coated capillaries. Results show that this new method is not only fast in speed, but also better in accuracy. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Non-supervised method for early forest fire detection and rapid mapping

    Science.gov (United States)

    Artés, Tomás; Boca, Roberto; Liberta, Giorgio; San-Miguel, Jesús

    2017-09-01

    Natural hazards are a challenge for the society. Scientific community efforts have been severely increased assessing tasks about prevention and damage mitigation. The most important points to minimize natural hazard damages are monitoring and prevention. This work focuses particularly on forest fires. This phenomenon depends on small-scale factors and fire behavior is strongly related to the local weather. Forest fire spread forecast is a complex task because of the scale of the phenomena, the input data uncertainty and time constraints in forest fire monitoring. Forest fire simulators have been improved, including some calibration techniques avoiding data uncertainty and taking into account complex factors as the atmosphere. Such techniques increase dramatically the computational cost in a context where the available time to provide a forecast is a hard constraint. Furthermore, an early mapping of the fire becomes crucial to assess it. In this work, a non-supervised method for forest fire early detection and mapping is proposed. As main sources, the method uses daily thermal anomalies from MODIS and VIIRS combined with land cover map to identify and monitor forest fires with very few resources. This method relies on a clustering technique (DBSCAN algorithm) and on filtering thermal anomalies to detect the forest fires. In addition, a concave hull (alpha shape algorithm) is applied to obtain rapid mapping of the fire area (very coarse accuracy mapping). Therefore, the method leads to a potential use for high-resolution forest fire rapid mapping based on satellite imagery using the extent of each early fire detection. It shows the way to an automatic rapid mapping of the fire at high resolution processing as few data as possible.

  6. Interaction between Rivers and Aquifers: a method for rapid Identification of Transience in Streambed Conductance

    Science.gov (United States)

    Gianni, Guillaume; Perrochet, Pierre; Vogel, Alexandre; Brunner, Philip

    2016-04-01

    Streambed hydraulic conductance controls the interactions between surface water and groundwater. In order to quantify river-aquifer dynamics, quantifying conductance is indispensable. However, the streambed conductance is often subject to transience, as a result of the erosion and deposition processes in rivers. This transience has to be quantified and considered for any approach (i.e. numerical or analytical models) aimed at quantifying exchange fluxes. Directly measuring hydraulic properties in a river yields only point values, is time-consuming and therefore not suited to detect transience of the physical properties. We present a method to continuously and rapidly monitor transience of streambed conductance. Input data are time series of stream stage and hydraulic head variations in the aquifer. The method is based on the inversion of a floodwave response. The analytical model consists of only 3 parameters: x, the distance between streambank and an observation well, α, the aquifer diffusivity and a, the retardation coefficient that is inversely proportional to the streambed conductance. Estimation of a is carried out over successive time steps in order to identify transience in streambed conductance. The method is tested on synthetic data and is applied to field data from the Rhône River and its alluvial aquifer (Switzerland). The synthetic method demonstrated the robustness of the proposed methodology. Application of the method to the field site allowed identifying transience in streambed properties, following flood events in the Rhône. This method requires transience in the surface water, and the river should not change its width significantly with a rising water level. If these conditions are fulfilled, this method allows for a rapid and effective identification of transience of streambed conductance.

  7. Solvent desorption dynamic headspace sampling of fermented dairy product volatiles.

    Science.gov (United States)

    Rankin, S A

    2001-01-01

    A method was developed based on solvent desorption dynamic headspace analysis for the identification and relative quantification of volatiles significant to the study of fermented dairy product aroma. Descriptions of applications of this method are presented including the measurement of diacetyl and acetoin in fermented milk, the evaluation of volatile-hydrocolloid interactions in dairy-based matrices, and the identification of volatiles in cheeses for canonical discriminative analysis. Advantages of this method include rapid analysis, minimal equipment investment, and the ability to analyze samples with traditional GC split/splitless inlet systems. Limitations of this method are that the sample must be in the liquid state and the inherent analytical limitation to those compounds that do not coelute with the solvent or solvent impurity peaks.

  8. The BUME method: a new rapid and simple chloroform-free method for total lipid extraction of animal tissue

    Science.gov (United States)

    Löfgren, Lars; Forsberg, Gun-Britt; Ståhlman, Marcus

    2016-06-01

    In this study we present a simple and rapid method for tissue lipid extraction. Snap-frozen tissue (15-150 mg) is collected in 2 ml homogenization tubes. 500 μl BUME mixture (butanol:methanol [3:1]) is added and automated homogenization of up to 24 frozen samples at a time in less than 60 seconds is performed, followed by a 5-minute single-phase extraction. After the addition of 500 μl heptane:ethyl acetate (3:1) and 500 μl 1% acetic acid a 5-minute two-phase extraction is performed. Lipids are recovered from the upper phase by automated liquid handling using a standard 96-tip robot. A second two-phase extraction is performed using 500 μl heptane:ethyl acetate (3:1). Validation of the method showed that the extraction recoveries for the investigated lipids, which included sterols, glycerolipids, glycerophospholipids and sphingolipids were similar or better than for the Folch method. We also applied the method for lipid extraction of liver and heart and compared the lipid species profiles with profiles generated after Folch and MTBE extraction. We conclude that the BUME method is superior to the Folch method in terms of simplicity, through-put, automation, solvent consumption, economy, health and environment yet delivering lipid recoveries fully comparable to or better than the Folch method.

  9. Rapid detection of carbapenemase production in Enterobacteriaceae using a modified paper strip Carba NP method.

    Science.gov (United States)

    Ho, Pak-Leung; Wang, Ya; Tse, Cindy Wing-Sze; Fung, Kitty Sau-Chun; Cheng, Vincent Ch-Chung; Lee, Rodney; To, Wing-Kin; Lai, Raymond Wai-Man; Luk, Wei-Kwang; Que, Tak-Lun; Tsang, Dominic Ngai-Chong

    2017-10-25

    Rapid and accurate detection of carbapenemase-producing Enterobacteriaceae (CPE) is important for preventing their spread in healthcare settings. We compared the performance of the Carba NP test using the CLSI tube method with that using a modified paper strip method for detection of carbapenemase in 390 Enterobacteriaceae isolates. The isolates were identified by Hong Kong's carbapenem-resistant Enterobacteriaceae surveillance program in 2016 and comprised 213 CPE and 177 carbapenemase-negative Enterobacteriaceae Molecular genotype was used as the reference. Test results were read at different time points for the CLSI method (1 min, 5 min, 1 h and 2 h) and strip method (1 min, 5 min). The strip CNP and CLSI CNP tests correctly detect carbapenemase production in 93% and 93% KPC producers, 100% and 38% IMI producers, 94% and 85% IMP producers, 98% and 90% NDM producers, and, 29% and 12% OXA producers, respectively. Overall, the strip method has superior sensitivity than the CLSI method (86% vs. 75%, respectively, P NP test using the modified strip method has a higher sensitivity and a shorter assay time than using the CLSI tube method. Copyright © 2017 American Society for Microbiology.

  10. Rapid Staining Method to Detect and Identify Downy Mildew (Peronospora belbahrii in Basil

    Directory of Open Access Journals (Sweden)

    Adolfina R. Koroch

    2013-07-01

    Full Text Available Premise of the study: Demand for fresh-market sweet basil continues to increase, but in 2009 a new pathogen emerged, threatening commercial field/greenhouse production and leading to high crop losses. This study describes a simple and effective staining method for rapid microscopic detection of basil downy mildew (Peronospora belbahrii from leaves of basil (Ocimum basilicum. Methods and Results: Fresh leaf sections infected with P. belbahrii were placed on a microscope slide, cleared with Visikol™, and stained with iodine solution followed by one drop of 70% sulfuric acid. Cell walls of the pathogen were stained with a distinct coloration, providing a high-contrast image between the pathogen and plant. Conclusions: This new staining method can be used successfully to identify downy mildew in basil, which then can significantly reduce its spread if identified early, coupled with mitigation strategies. This technique can facilitate the control of the disease, without expensive and specialized equipment.

  11. The method of parallel-hierarchical transformation for rapid recognition of dynamic images using GPGPU technology

    Science.gov (United States)

    Timchenko, Leonid; Yarovyi, Andrii; Kokriatskaya, Nataliya; Nakonechna, Svitlana; Abramenko, Ludmila; Ławicki, Tomasz; Popiel, Piotr; Yesmakhanova, Laura

    2016-09-01

    The paper presents a method of parallel-hierarchical transformations for rapid recognition of dynamic images using GPU technology. Direct parallel-hierarchical transformations based on cluster CPU-and GPU-oriented hardware platform. Mathematic models of training of the parallel hierarchical (PH) network for the transformation are developed, as well as a training method of the PH network for recognition of dynamic images. This research is most topical for problems on organizing high-performance computations of super large arrays of information designed to implement multi-stage sensing and processing as well as compaction and recognition of data in the informational structures and computer devices. This method has such advantages as high performance through the use of recent advances in parallelization, possibility to work with images of ultra dimension, ease of scaling in case of changing the number of nodes in the cluster, auto scan of local network to detect compute nodes.

  12. Large Rapidity Gap Method to Select Soft Diffraction Dissociation at the LHC

    Directory of Open Access Journals (Sweden)

    Emily Nurse

    2016-01-01

    Full Text Available In proton-proton (pp collisions, any process involves exchanging the vacuum quantum numbers is known as diffractive process. A diffractive process with no large Q2 is called soft diffractive process. The diffractive processes are important for understanding nonperturbative QCD effects and they also constitute a significant fraction of the total pp cross section. The diffractive events are typically characterized by a region of the detector without particles, known as a rapidity gap. In order to observe diffractive events in this way, we consider the pseudorapidity acceptance in the forward region of the ATLAS and CMS detectors at the Large Hadron Collider (LHC and discuss the methods to select soft diffractive dissociation for pp collisions at s=7 TeV. It is shown that, in the limited detector rapidity acceptance, it is possible to select diffractive dissociation events by requiring a rapidity gap in the event; however, without using forward detectors, it seems not possible to fully separate single and double diffractive dissociation events. The Zero Degree Calorimeters can be used to distinguish the type of the diffractive processes up to a certain extent.

  13. Hierarchically rough, mechanically durable and superhydrophobic epoxy coatings through rapid evaporation spray method

    Energy Technology Data Exchange (ETDEWEB)

    Simovich, Tomer; Wu, Alex H.; Lamb, Robert N., E-mail: rnlamb@unimelb.edu.au

    2015-08-31

    A mechanically durable and scalable superhydrophobic coating was fabricated by combining the advantages of both bottom-up and top-down approaches into a one-pot, one-step application method. This is achieved by spray coating a solution consisting of silica nanoparticles, which are embedded within epoxy resin, onto a heated substrate to rapidly drive both solvent evaporation and curing simultaneously. By maintaining a high substrate temperature, the arrival of spray-delivered micrometer-sized droplets are rapidly cured onto the substrate to form surface microroughness, while simultaneously, rapid solvent evaporation within each droplet results in the formation of a nanoporous structure. SEM, dual-beam FIB, and cross-sectional TEM/EDAX elemental mapping were used to confirm both the chemistry and the requisite micro- and nano-porosity within the coating structure requisite for superhydrophobicity. The resultant coatings exhibit contact angles greater than 150° (153.8° ± 0.8°) and roll-off angles of 8° ± 2°, with a coating hardness of 6H on the pencil hardness scale, and a rating of 5 on an ASTM crosshatch test. - Highlights: • A highly superhydrophobic coating was fabricated utilizing epoxy and nanoparticles. • The coating was demonstrated to be very durable and abrasion resistant. • The fabrication involves a novel, scalable one-pot synthesis technique.

  14. Rapid Method for Ra-226 and Ra-228 in Water Samples

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Sherrod, L. III

    2006-02-10

    The measurement of radium isotopes in natural waters is important for oceanographic studies and for public health reasons. Ra-226 (1620 year half-life) is one of the most toxic of the long-lived alpha emitters present in the environment due to its long life and its tendency to concentrate in bones, which increases the internal radiation dose of individuals. The analysis of radium-226 and radium-228 in natural waters can be tedious and time-consuming. Different sample preparation methods are often required to prepare Ra-226 and Ra-228 for separate analyses. A rapid method has been developed at the Savannah River Environmental Laboratory that effectively separates both Ra-226 and Ra-228 (via Ac-228) for assay. This method uses MnO{sub 2} Resin from Eichrom Technologies (Darien, IL, USA) to preconcentrate Ra-226 and Ra-228 rapidly from water samples, along with Ba-133 tracer. DGA Resin{reg_sign} (Eichrom) and Ln-Resin{reg_sign} (Eichrom) are employed in tandem to prepare Ra-226 for assay by alpha spectrometry and to determine Ra-228 via the measurement of Ac-228 by gas proportional counting. After preconcentration, the manganese dioxide is dissolved from the resin and passed through stacked Ln-Resin-DGA Resin cartridges that remove uranium and thorium interferences and retain Ac-228 on DGA Resin. The eluate that passed through this column is evaporated, redissolved in a lower acidity and passed through Ln-Resin again to further remove interferences before performing a barium sulfate microprecipitation. The Ac-228 is stripped from the resin, collected using cerium fluoride microprecipitation and counted by gas proportional counting. By using vacuum box cartridge technology with rapid flow rates, sample preparation time is minimized.

  15. A rapid and sensitive method for measuring N-acetylglucosaminidase activity in cultured cells.

    Directory of Open Access Journals (Sweden)

    Victor Mauri

    Full Text Available A rapid and sensitive method to quantitatively assess N-acetylglucosaminidase (NAG activity in cultured cells is highly desirable for both basic research and clinical studies. NAG activity is deficient in cells from patients with Mucopolysaccharidosis type IIIB (MPS IIIB due to mutations in NAGLU, the gene that encodes NAG. Currently available techniques for measuring NAG activity in patient-derived cell lines include chromogenic and fluorogenic assays and provide a biochemical method for the diagnosis of MPS IIIB. However, standard protocols require large amounts of cells, cell disruption by sonication or freeze-thawing, and normalization to the cellular protein content, resulting in an error-prone procedure that is material- and time-consuming and that produces highly variable results. Here we report a new procedure for measuring NAG activity in cultured cells. This procedure is based on the use of the fluorogenic NAG substrate, 4-Methylumbelliferyl-2-acetamido-2-deoxy-alpha-D-glucopyranoside (MUG, in a one-step cell assay that does not require cell disruption or post-assay normalization and that employs a low number of cells in 96-well plate format. We show that the NAG one-step cell assay greatly discriminates between wild-type and MPS IIIB patient-derived fibroblasts, thus providing a rapid method for the detection of deficiencies in NAG activity. We also show that the assay is sensitive to changes in NAG activity due to increases in NAGLU expression achieved by either overexpressing the transcription factor EB (TFEB, a master regulator of lysosomal function, or by inducing TFEB activation chemically. Because of its small format, rapidity, sensitivity and reproducibility, the NAG one-step cell assay is suitable for multiple procedures, including the high-throughput screening of chemical libraries to identify modulators of NAG expression, folding and activity, and the investigation of candidate molecules and constructs for applications in

  16. Rapid expansion method (REM) for time‐stepping in reverse time migration (RTM)

    KAUST Repository

    Pestana, Reynam C.

    2009-01-01

    We show that the wave equation solution using a conventional finite‐difference scheme, derived commonly by the Taylor series approach, can be derived directly from the rapid expansion method (REM). After some mathematical manipulation we consider an analytical approximation for the Bessel function where we assume that the time step is sufficiently small. From this derivation we find that if we consider only the first two Chebyshev polynomials terms in the rapid expansion method we can obtain the second order time finite‐difference scheme that is frequently used in more conventional finite‐difference implementations. We then show that if we use more terms from the REM we can obtain a more accurate time integration of the wave field. Consequently, we have demonstrated that the REM is more accurate than the usual finite‐difference schemes and it provides a wave equation solution which allows us to march in large time steps without numerical dispersion and is numerically stable. We illustrate the method with post and pre stack migration results.

  17. An evaluation of rapid methods for monitoring vegetation characteristics of wetland bird habitat

    Science.gov (United States)

    Tavernia, Brian G.; Lyons, James E.; Loges, Brian W.; Wilson, Andrew; Collazo, Jaime A.; Runge, Michael C.

    2016-01-01

    Wetland managers benefit from monitoring data of sufficient precision and accuracy to assess wildlife habitat conditions and to evaluate and learn from past management decisions. For large-scale monitoring programs focused on waterbirds (waterfowl, wading birds, secretive marsh birds, and shorebirds), precision and accuracy of habitat measurements must be balanced with fiscal and logistic constraints. We evaluated a set of protocols for rapid, visual estimates of key waterbird habitat characteristics made from the wetland perimeter against estimates from (1) plots sampled within wetlands, and (2) cover maps made from aerial photographs. Estimated percent cover of annuals and perennials using a perimeter-based protocol fell within 10 percent of plot-based estimates, and percent cover estimates for seven vegetation height classes were within 20 % of plot-based estimates. Perimeter-based estimates of total emergent vegetation cover did not differ significantly from cover map estimates. Post-hoc analyses revealed evidence for observer effects in estimates of annual and perennial covers and vegetation height. Median time required to complete perimeter-based methods was less than 7 percent of the time needed for intensive plot-based methods. Our results show that rapid, perimeter-based assessments, which increase sample size and efficiency, provide vegetation estimates comparable to more intensive methods.

  18. wzi Gene Sequencing, a Rapid Method for Determination of Capsular Type for Klebsiella Strains

    Science.gov (United States)

    Passet, Virginie; Haugaard, Anita Björk; Babosan, Anamaria; Kassis-Chikhani, Najiby; Struve, Carsten; Decré, Dominique

    2013-01-01

    Pathogens of the genus Klebsiella have been classified into distinct capsular (K) types for nearly a century. K typing of Klebsiella species still has important applications in epidemiology and clinical microbiology, but the serological method has strong practical limitations. Our objective was to evaluate the sequencing of wzi, a gene conserved in all capsular types of Klebsiella pneumoniae that codes for an outer membrane protein involved in capsule attachment to the cell surface, as a simple and rapid method for the prediction of K type. The sequencing of a 447-nucleotide region of wzi distinguished the K-type reference strains with only nine exceptions. A reference wzi sequence database was created by the inclusion of multiple strains representing K types associated with high virulence and multidrug resistance. A collection of 119 prospective clinical isolates of K. pneumoniae were then analyzed in parallel by wzi sequencing and classical K typing. Whereas K typing achieved typeability for 81% and discrimination for 94.4% of the isolates, these figures were 98.1% and 98.3%, respectively, for wzi sequencing. The prediction of K type once the wzi allele was known was 94%. wzi sequencing is a rapid and simple method for the determination of the K types of most K. pneumoniae clinical isolates. PMID:24088853

  19. A rapid method for measuring soil water content in the field with a areometer

    Directory of Open Access Journals (Sweden)

    Calbo Adonai Gimenez

    2002-01-01

    Full Text Available The availability of a rapid method to evaluate the soil water content (U can be an important tool to determine the moment to irrigate. The soil areometer consists of an elongated hydrostatic balance with a weighing pan, a graduated neck, a float and a pynometric flask. In this work an areometer was adapted to rapidly measure soil water content without the need of drying the soil. The expression U = (M A - M AD/(M M -M A was used to calculate the soil water content. In this equation M M is the mass to level the areometer with the pycnometric flask filled with water, M A the mass to level the areometer with a mass M M of soil in the pycnometer, the volume being completed with water, and similarly M AD the mass added to the pan to level the areometer with a mass M M of dried soil in the pycnometric flask. The convenience of this method is that the values M M and M AD are known. Consequently, the decision on irrigation can be made after a measurement that takes, about, ten minutes. The procedure involves only stirring the soil with water for at least 2 minutes to remove the adhered air. The soil water content data obtained with the areometric method were similar to those obtained weighing the soil before and after drying to constant weight, in an oven at 105º C.

  20. Single-step blood direct PCR: A robust and rapid method to diagnose triplet repeat disorders.

    Science.gov (United States)

    Singh, Inder; Swarup, Vishnu; Shakya, Sunil; Goyal, Vinay; Faruq, Mohammed; Srivastava, Achal Kumar

    2017-08-15

    DNA extraction prior to polymerase chain reaction (PCR) amplification in genetic diagnoses of triplet repeat disorders (TRDs) is tedious and labour-intensive and has the limitations of sample contamination with foreign DNA, including that from preceding samples. Therefore, we aimed to develop a rapid, robust, and cost-effective method for expeditious genetic investigation of TRDs from whole blood as a DNA template. Peripheral blood samples were collected from 70 clinically suspected patients of progressive ataxia. The conventional method using genomic DNA and single-step Blood-Direct PCR (BD-PCR) method with just 2μl of whole blood sample were tested to amplify triplet repeat expansion in genes related to spinocerebellar ataxia (SCA) types 1, 2, 3, 12 and Friedreich's ataxia (FRDA). Post-PCR, the allele sizes were mapped and repeat numbers were calculated using GeneMapper and macros run in Microsoft Excel programmes. Successful amplification of target regions was achieved in all samples by both methods. The frequency of the normal and mutated allele was concordant between both methods, diagnosing 37% positive for a mutation in either of the candidate genes. The BD-PCR resulted in higher intensities of product peaks of normal and pathogenic alleles. The nearly-accurate sizing of the normal and expanded allele was achieved in a shorter time (4-5h), without DNA extraction and any risk of cross contamination, which suggests the BD-PCR to be a reliable, inexpensive, and rapid method to confirm TRDs. This technique can be introduced in routine diagnostic procedures of other tandem repeat disorders. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. A Rapid Method for Determining the Concentration of Recombinant Protein Secreted from Pichia pastoris

    Science.gov (United States)

    Sun, L. W.; Zhao, Y.; Niu, L. P.; Jiang, R.; Song, Y.; Feng, H.; feng, K.; Qi, C.

    2011-02-01

    Pichia secretive expression system is one of powerful eukaryotic expression systems in genetic engineering, which is especially suitable for industrial utilization. Because of the low concentration of the target protein in initial experiment, the methods and conditions for expression of the target protein should be optimized according to the protein yield repetitively. It is necessary to set up a rapid, simple and convenient analysis method for protein expression levels instead of the generally used method such as ultrafiltration, purification, dialysis, lyophilization and so on. In this paper, acetone precipitation method was chosen to concentrate the recombinant protein firstly after comparing with four different protein precipitation methods systematically, and then the protein was analyzed by SDS-Polyacrylamide Gel Electrophoresis. The recombinant protein was determined with the feature of protein band by the Automated Image Capture and 1-D Analysis Software directly. With this method, the optimized expression conditions of basic fibroblast growth factor secreted from pichia were obtained, which is as the same as using traditional methods. Hence, a convenient tool to determine the optimized conditions for the expression of recombinant proteins in Pichia was established.

  2. Rapid Reticulin Fiber Staining Method is Helpful for the Diagnosis of Pituitary Adenoma in Frozen Section.

    Science.gov (United States)

    Noh, Songmi; Kim, Sun Ho; Cho, Nam Hoon; Kim, Se Hoon

    2015-05-01

    Approximately 90% of neoplasms found in the sellar region are adenoma of the pituitary gland. The use of frozen sections for the diagnosis of pituitary adenomas has an accuracy of 90% and is useful in evaluating complete tumor removal. However, it is sometimes difficult to diagnose pituitary adenomas using frozen sections because of the small sample size and marked artifact, and the contiguity of the pituitary adenoma with normal pituitary gland tissue. In this study, we evaluated the use of our modified reticulin stain to make correct decision in frozen section with reduced stain time and investigated the objective diagnostic criteria of pituitary adenoma with reticulin stain. We used Gomori's silver impregnation methods to stain reticulin fibers in frozen pituitary gland sections of 36 samples from 24 patients. We modified the conventional staining method by reducing the overall staining time. We diagnosed pituitary lesion according to our interpretation criteria and compared the results to those of the conventional method and findings of hematoxylin and eosin-stained slides. Reticulin fiber staining of normal adenohypophysis outlines the supporting stroma around the blood vessels and shows regular of the gland meshwork interconnecting the capillaries. In contrast, reticulin fiber staining of the adenomatous tissue shows loss of meshwork or frequent fragmentation. Our modified reticulin stain is more rapid than the established method and shows similar levels of accuracy. Independent evaluation by two pathologists showed discrepancies in diagnosis in four out of 36 cases with modified reticulin stain. Our rapid modified reticulin staining method for frozen sections may be useful as a diagnostic tool for pituitary adenomas and can complement routine hematoxylin and eosin staining.

  3. Clinical usefulness of multiplex PCR lateral flow in MRSA detection: a novel, rapid genetic testing method.

    Science.gov (United States)

    Nihonyanagi, Shin; Kanoh, Yuhsaku; Okada, Kiyomi; Uozumi, Toshiki; Kazuyama, Yukumasa; Yamaguchi, Tokiko; Nakazaki, Nobuhiko; Sakurai, Keizou; Hirata, Yasuyoshi; Munekata, Shinichi; Ohtani, Shinichi; Takemoto, Tsuyoshi; Bandoh, Yuki; Akahoshi, Tohru

    2012-06-01

    Methicillin-resistant Staphylococcus aureus (MRSA) with exogenous cassette DNA containing the methicillin-resistant gene mecA (SCCmec) poses a problem as a drug-resistant bacterium responsible for hospital- and community-acquired infections. The frequency of MRSA detection has recently been increasing rapidly in Japan, and SCCmec has also been classified more diversely into types I-V. A rapid test is essential for early diagnosis and treatment of MRSA infections, but detection by conventional methods requires at least two days. The newly developed multiplex PCR lateral flow method allows specific amplification of femA to detect S. aureus, mecA to detect SCCmec, and kdpC to detect SCCmec type II; moreover, PCR products can be evaluated visually in about 3 h. In the present study, we developed a PCR lateral flow method for MRSA using this method and investigated its clinical usefulness in the detection of MRSA. The results showed a diagnostic concordance rate of 91.7% for MRSA and methicillin-susceptible S. aureus between bacteriological examination and PCR lateral flow, and a high level of specificity in PCR lateral flow. In addition, a higher detection rate for S. aureus using the same sample was observed for PCR lateral flow (70.2%) than for bacteriological tests (48.6%). The above results show that PCR lateral flow for MRSA detection has high sensitivity, specificity, and speed, and its clinical application as a method for early diagnosis of MRSA infections appears to be feasible.

  4. Optimal estimation and scheduling in aquifer management using the rapid feedback control method

    Science.gov (United States)

    Ghorbanidehno, Hojat; Kokkinaki, Amalia; Kitanidis, Peter K.; Darve, Eric

    2017-12-01

    Management of water resources systems often involves a large number of parameters, as in the case of large, spatially heterogeneous aquifers, and a large number of "noisy" observations, as in the case of pressure observation in wells. Optimizing the operation of such systems requires both searching among many possible solutions and utilizing new information as it becomes available. However, the computational cost of this task increases rapidly with the size of the problem to the extent that textbook optimization methods are practically impossible to apply. In this paper, we present a new computationally efficient technique as a practical alternative for optimally operating large-scale dynamical systems. The proposed method, which we term Rapid Feedback Controller (RFC), provides a practical approach for combined monitoring, parameter estimation, uncertainty quantification, and optimal control for linear and nonlinear systems with a quadratic cost function. For illustration, we consider the case of a weakly nonlinear uncertain dynamical system with a quadratic objective function, specifically a two-dimensional heterogeneous aquifer management problem. To validate our method, we compare our results with the linear quadratic Gaussian (LQG) method, which is the basic approach for feedback control. We show that the computational cost of the RFC scales only linearly with the number of unknowns, a great improvement compared to the basic LQG control with a computational cost that scales quadratically. We demonstrate that the RFC method can obtain the optimal control values at a greatly reduced computational cost compared to the conventional LQG algorithm with small and controllable losses in the accuracy of the state and parameter estimation.

  5. Efficient 3D frequency response modeling with spectral accuracy by the rapid expansion method

    KAUST Repository

    Chu, Chunlei

    2012-07-01

    Frequency responses of seismic wave propagation can be obtained either by directly solving the frequency domain wave equations or by transforming the time domain wavefields using the Fourier transform. The former approach requires solving systems of linear equations, which becomes progressively difficult to tackle for larger scale models and for higher frequency components. On the contrary, the latter approach can be efficiently implemented using explicit time integration methods in conjunction with running summations as the computation progresses. Commonly used explicit time integration methods correspond to the truncated Taylor series approximations that can cause significant errors for large time steps. The rapid expansion method (REM) uses the Chebyshev expansion and offers an optimal solution to the second-order-in-time wave equations. When applying the Fourier transform to the time domain wavefield solution computed by the REM, we can derive a frequency response modeling formula that has the same form as the original time domain REM equation but with different summation coefficients. In particular, the summation coefficients for the frequency response modeling formula corresponds to the Fourier transform of those for the time domain modeling equation. As a result, we can directly compute frequency responses from the Chebyshev expansion polynomials rather than the time domain wavefield snapshots as do other time domain frequency response modeling methods. When combined with the pseudospectral method in space, this new frequency response modeling method can produce spectrally accurate results with high efficiency. © 2012 Society of Exploration Geophysicists.

  6. A new method for rapid determination of carbohydrate and total carbon concentrations using UV spectrophotometry.

    Science.gov (United States)

    Albalasmeh, Ammar A; Berhe, Asmeret Asefaw; Ghezzehei, Teamrat A

    2013-09-12

    A new UV spectrophotometry based method for determining the concentration and carbon content of carbohydrate solution was developed. This method depends on the inherent UV absorption potential of hydrolysis byproducts of carbohydrates formed by reaction with concentrated sulfuric acid (furfural derivatives). The proposed method is a major improvement over the widely used Phenol-Sulfuric Acid method developed by DuBois, Gilles, Hamilton, Rebers, and Smith (1956). In the old method, furfural is allowed to develop color by reaction with phenol and its concentration is detected by visible light absorption. Here we present a method that eliminates the coloration step and avoids the health and environmental hazards associated with phenol use. In addition, avoidance of this step was shown to improve measurement accuracy while significantly reducing waiting time prior to light absorption reading. The carbohydrates for which concentrations and carbon content can be reliably estimated with this new rapid Sulfuric Acid-UV technique include: monosaccharides, disaccharides and polysaccharides with very high molecular weight. Copyright © 2013 Elsevier Ltd. All rights reserved.

  7. A Simple and Rapid Data Extraction Method for the Precision Aspheric Optical Surface Height

    Science.gov (United States)

    Xing, Guohua; Peng, Yunfeng; Su, Xing

    2017-10-01

    Nowadays, the application of aspheric optics is becoming more and more popular in the precision optical engineering field. Therefore, it urges the rapid development of the precision machining and measuring technology. Generally, the aspheric optical component is measured by the interferometer. The underlying question is that the figure output by interferometer can’t be always recognized by other analysis software or program though the interferometer has its own unique data processing system. In this paper, a robust, rapid and simple method is presented to interpret the surface height data of the precision machined aspheric optical surface. The optical surface is measured by interferometer. The result figure is split into two parts, one of which is the interferogram picture of the whole aspheric optical surface and the other is the colour reference column indicating the height value. The ratios of the red (R), green (G) and blue (B) are analysed based on the middle of the colour reference column, and the corresponding relationship between the colours and surface height is established and looked as a reference data base. Then the interferogram picture of the whole aspheric optical surface is also analysed and divided according to the red (R), green (G) and blue (B) colours. By comparing the ratios and values of RGB colour, the aspheric optical surface height can be extracted approximately. The feasibility of this method was approved by the extraction processing experiment of a polished aspheric optical surface.

  8. A rapid, highly accurate method for quantifying CALR mutant allele burden in persons with myeloproliferative neoplasms.

    Science.gov (United States)

    Yao, Qiu-Mei; Zhou, Jiao; Gale, Robert Peter; Li, Jin-Lan; Li, Ling-Di; Li, Ning; Chen, Shan-Shan; Ruan, Guo-Rui

    2015-10-01

    Calreticulin (CALR) mutations were recently identified in a substantial proportion of persons with essential thrombocythemia (ET) and with primary myelofibrosis (PMF) without JAK2(V617F). Consequently rapid, sensitive, and specific methods to detect and quantify these mutations are needed. We studied samples from 1088 persons with myeloproliferative neoplasms (MPNs) including 421 JAK2(V617F) negative subjects with ET, PMF, polycythemia vera (PV), chronic myeloid leukemia (CML) and hyper-eosinophilic syndrome (HES). Detection of CALR exon 9 mutations was done by PCR amplification followed by fragment length analysis and direct sequencing. Dilution assays were used to determine CALR mutant allele burden. We detected CALR mutations in blood and bone marrow samples from 152 subjects with ET and with PMF but not in samples from normal or persons with PV, CML, or HES. CALR mutant peaks were distinct from wild-type peaks and dilution experiments indicated a sensitivity level of 0.5-5% for a CALR mutant allele in a wild-type background. Diverse types of mutations were detected including deletions, insertions, and complex indels. All mutations were confirmed by direct sequencing. We also used dilution experiments to quantify mutant allele burden. We were able to reproducibly detect mutant allele levels as low 5% (0.5-5%) in a wild-type background. PCR amplification followed by fragment length analysis is a rapid, sensitive, and specific method for screening persons with MPNs for CALR mutations, especially those with ET and PMF and for estimating mutant allele burden.

  9. Rapid fabrication method of a microneedle mold with controllable needle height and width.

    Science.gov (United States)

    Lin, Yen-Heng; Lee, I-Chi; Hsu, Wei-Chieh; Hsu, Ching-Hong; Chang, Kai-Ping; Gao, Shao-Syuan

    2016-10-01

    The main issue of transdermal drug delivery is that macromolecular drugs cannot diffuse through the stratum corneum of skin. Many studies have pursued micro-sized needles encapsulated with drugs to overcome this problem, as these needles can pierce the stratum corneum and allow drugs to enter the circulatory system of the human body. However, most microneedle fabrication processes are time-consuming and require expensive equipment. In this study, we demonstrate a rapid method for fabricating a microneedle mold using drawing lithography and a UV-cured resin. The mold was filled with a water-soluble material, polyvinylpyrrolidone (PVP), which was then demolded to produce a water-soluble microneedle array. The results of an in vitro skin insertion test using PVP microneedles and pig ear skin demonstrated the feasibility of the microneedle mold. In addition, by controlling the viscosity of the UV-cured resin through various heat treatments, microneedles with different heights and aspect ratios were produced. Compared with other methods, this technology significantly simplifies and accelerates the mold fabrication process. In addition, the required equipment is relatively simple and inexpensive. Through this technology, we can rapidly fabricate microneedle molds with controllable dimensions for various applications.

  10. Passive acoustic methods for fine-scale tracking of harbour porpoises in tidal rapids.

    Science.gov (United States)

    Macaulay, Jamie; Gordon, Jonathan; Gillespie, Douglas; Malinka, Chloë; Northridge, Simon

    2017-02-01

    The growing interest in generating electrical power from tidal currents using tidal turbine generators raises a number of environmental concerns, including the risk that marine mammals might be injured or killed through collision with rotating turbine blades. To understand this risk, information on how marine mammals use tidal rapid habitats and in particular, their underwater movements and dive behaviour is required. Porpoises, which are the most abundant small cetacean at most European tidal sites, are difficult animals to tag, and the limited size of tidal habitats means that any telemetered animal would be likely to spend only a small proportion of time within them. Here, an alternative approach is explored, whereby passive acoustic monitoring (PAM) is used to obtain fine scale geo-referenced tracks of harbour porpoises in tidal rapid areas. Large aperture hydrophone arrays are required to obtain accurate locations of animals from PAM data and automated algorithms are necessary to process the large quantities of acoustic data collected on such systems during a typical survey. Methods to automate localisation, including a method to match porpoise detections on different hydrophones and separate different vocalising animals, and an assessment of the localisation accuracy of the large aperture hydrophone array are presented.

  11. Miniaturized fluorescent RNA dot blot method for rapid quantitation of gene expression

    Directory of Open Access Journals (Sweden)

    Yadetie Fekadu

    2004-06-01

    Full Text Available Abstract Background RNA dot blot hybridization is a commonly used technique for gene expression assays. However, membrane based RNA dot/slot blot hybridization is time consuming, requires large amounts of RNA, and is less suited for parallel assays of more than one gene at a time. Here, we describe a glass-slide based miniaturized RNA dot blot (RNA array procedure for rapid and parallel gene expression analysis using fluorescently labeled probes. Results RNA arrays were prepared by simple manual spotting of RNA onto amino-silane coated microarray glass slides, and used for two-color fluorescent hybridization with specific probes labeled with Cy3 and 18S ribosomal RNA house-keeping gene probe labeled with Cy5 fluorescent dyes. After hybridization, arrays were scanned on a fluorescent microarray scanner and images analyzed using microarray image analysis software. We demonstrate that this method gives comparable results to Northern blot analysis, and enables high throughput quantification of transcripts from nanogram quantities of total RNA in hundreds of samples. Conclusion RNA array on glass slide and detection by fluorescently labeled probes can be used for rapid and parallel gene expression analysis. The method is particularly well suited for gene expression assays that involve quantitation of many transcripts in large numbers of samples.

  12. Hyperspectral Imaging as a Rapid Quality Control Method for Herbal Tea Blends

    Directory of Open Access Journals (Sweden)

    Majolie Djokam

    2017-03-01

    Full Text Available In South Africa, indigenous herbal teas are enjoyed due to their distinct taste and aroma. The acclaimed health benefits of herbal teas include the management of chronic diseases such as hypertension and diabetes. Quality control of herbal teas has become important due to the availability of different brands of varying quality and the production of tea blends. The potential of hyperspectral imaging as a rapid quality control method for herbal tea blends from rooibos (Aspalathus linearis, honeybush (Cyclopia intermedia, buchu (Agathosma Betulina and cancerbush (Sutherlandia frutescens was investigated. Hyperspectral images of raw materials and intact tea bags were acquired using a sisuChema shortwave infrared (SWIR hyperspectral pushbroom imaging system (920–2514 nm. Principal component analysis (PCA plots showed clear discrimination between raw materials. Partial least squares discriminant analysis (PLS-DA models correctly predicted the raw material constituents of each blend and accurately determined the relative proportions. The results were corroborated independently using ultra-high performance liquid chromatography coupled to mass spectrometry (UHPLC-MS. This study demonstrated the application of hyperspectral imaging coupled with chemometric modelling as a reliable, rapid and non-destructive quality control method for authenticating herbal tea blends and to determine relative proportions in a tea bag.

  13. Rapid and label-free bioanalytical method of alpha fetoprotein detection using LSPR chip

    Science.gov (United States)

    Kim, Dongjoo; Kim, Jinwoon; Kwak, Cheol Hwan; Heo, Nam Su; Oh, Seo Yeong; Lee, Hoomin; Lee, Go-Woon; Vilian, A. T. Ezhil; Han, Young-Kyu; Kim, Woo-Sik; Kim, Gi-bum; Kwon, Soonjo; Huh, Yun Suk

    2017-07-01

    Alpha fetoprotein (AFP) is a cancer marker, particularly for hepatocellular carcinoma. Normal levels of AFP are less than 20 ng/mL; however, its levels can reach more than 400 ng/mL in patients with HCC. Enzyme linked immunosorbent assay (ELISA) and radioimmunoassay (RIA) have been employed for clinical diagnosis of AFP; however, these methods are time consuming and labor intensive. In this study, we developed a localized surface plasmon resonance (LSPR) based biosensor for simple and rapid detection of AFP. This biosensor consists of a UV-Vis spectrometer, a cuvette cell, and a biosensor chip nanopatterned with gold nanoparticles (AuNPs). In our LSPR biosensor, binding of AFP to the surface of the sensor chip led to an increasing magnitude of the LSPR signals, which was measured by an ultraviolet-visible (UV-Vis) spectrometer. Our LSPR biosensor showed sufficient detectability of AFP at concentrations of 1 ng/mL to 1 μg/mL. Moreover, the overall procedure for detection of AFP was completed within 20 min. This biosensor could also be utilized for a point of care test (POCT) by employing a portable UV-Vis spectrometer. Owing to the simplicity and rapidity of the detection process, our LSPR biosensor is expected to replace traditional diagnostic methods for the early detection of diseases.

  14. Rapid HPLC method for the simultaneous monitoring of duloxetine, venlaflaxine, fluoxetine and paroxetine in biofluids.

    Science.gov (United States)

    Samanidou, Victoria F; Kourti, Paraskevi V

    2009-08-01

    A simple and rapid HPLC method is developed for the determination of two serotonin-norepinephrine-reuptake inhibitors (duloxetine and venlaflaxine) and two selective serotonin-reuptake inhibitors (fluoxetine and paroxetine) in human biofluids. Separation was performed on an Inertsil ODS-3 column (250 x 4.0 mm, 5 µm) with acetonitrile-ammonium acetate (0.05 M, 41:59 v/v) at 235 nm, within 7 min. SPE on Oasis(®) HLB cartridges was applied for the isolation of analytes from biofluids. The developed methodology was validated in terms of sensitivity, linearity, accuracy, precision, stability and selectivity. Relative standard deviation was less than 10.4%. Limit of detection was 0.2-0.6 ng/µl in blood plasma and 0.1-0.8 ng/µl in urine. The method was successfully applied to biofluids from a patient under duloxetine treatment.

  15. A rapid and scalable method for selecting recombinant mouse monoclonal antibodies

    Directory of Open Access Journals (Sweden)

    Wright Gavin J

    2010-06-01

    Full Text Available Abstract Background Monoclonal antibodies with high affinity and selectivity that work on wholemount fixed tissues are valuable reagents to the cell and developmental biologist, and yet isolating them remains a long and unpredictable process. Here we report a rapid and scalable method to select and express recombinant mouse monoclonal antibodies that are essentially equivalent to those secreted by parental IgG-isotype hybridomas. Results Increased throughput was achieved by immunizing mice with pools of antigens and cloning - from small numbers of hybridoma cells - the functionally rearranged light and heavy chains into a single expression plasmid. By immunizing with the ectodomains of zebrafish cell surface receptor proteins expressed in mammalian cells and screening for formalin-resistant epitopes, we selected antibodies that gave expected staining patterns on wholemount fixed zebrafish embryos. Conclusions This method can be used to quickly select several high quality monoclonal antibodies from a single immunized mouse and facilitates their distribution using plasmids.

  16. A method for rapidly screening functionality of actin mutants and tagged actins

    Directory of Open Access Journals (Sweden)

    Rommelaere Heidi

    2004-01-01

    Full Text Available Recombinant production and biochemical analysis of actin mutants has been hampered by the fact that actin has an absolute requirement for the eukaryotic chaperone CCT to reach its native state. We therefore have developed a method to rapidly screen the folding capacity and functionality of actin variants, by combining in vitro expression of labelled actin with analysis on native gels, band shift assays or copolymerization tests. Additionally, we monitor, using immuno-fluorescence, incorporation of actin variants in cytoskeletal structures in transfected cells. We illustrate the method by two examples. In one we show that tagged versions of actin do not always behave native-like and in the other we study some of the molecular defects of three &bgr;-actin mutants that have been associated with diseases.

  17. A rapid and efficient DNA extraction method suitable for marine macroalgae.

    Science.gov (United States)

    Ramakrishnan, Gautham Subramaniam; Fathima, Anwar Aliya; Ramya, Mohandass

    2017-12-01

    Macroalgae are a diverse group of organisms. Marine macroalgae, in particular, have numerous medicinal and industrial applications. Molecular studies of macroalgae require suitable concentrations of DNA free of contaminants. At present, numerous protocols exist for DNA extraction from macroalgae. However, they are either time consuming, expensive or work only with few species. The method described in this study is rapid and efficient and applicable to different types of marine macroalgae. This method yields an average of 3.85 µg of DNA per 50 mg of algal tissue, with an average purity of 1.88. The isolated DNA was suitable for PCR amplification of universal plastid region of macroalgae.

  18. A Rapid Colorimetric Method Reveals Fraudulent Substitutions in Sea Urchin Roe Marketed in Sardinia (Italy).

    Science.gov (United States)

    Meloni, Domenico; Spina, Antonio; Satta, Gianluca; Chessa, Vittorio

    2016-06-25

    In recent years, besides the consumption of fresh sea urchin specimens, the demand of minimally-processed roe has grown considerably. This product has made frequent consumption in restaurants possible and frauds are becoming widespread with the partial replacement of sea urchin roe with surrogates that are similar in colour. One of the main factors that determines the quality of the roe is its colour and small differences in colour scale cannot be easily discerned by the consumers. In this study we have applied a rapid colorimetric method for reveal the fraudulent partial substitution of semi-solid sea urchin roe with liquid egg yolk. Objective assessment of whiteness (L*), redness (a*), yellowness (b*), hue (h*), and chroma (C*) was carried out with a digital spectrophotometer using the CIE L*a*b* colour measurement system. The colorimetric method highlighted statistically significant differences among sea urchin roe and liquid egg yolk that could be easily discerned quantitatively.

  19. Meselect – A rapid and effective method for the separation of the main leaf tissue types

    Directory of Open Access Journals (Sweden)

    Julia Svozil

    2016-11-01

    Full Text Available Individual tissues of complex eukaryotic organisms have specific gene expression programs that control their functions. Therefore, tissue-specific molecular information is required to increase our understanding of tissue-specific processes. Established methods in plants to obtain specific tissues or cell types from their organ or tissue context typically require the enzymatic degradation of cell walls followed by fluorescence-activated cell sorting (FACS using plants engineered for localized expression of green fluorescent protein (GFP. This has facilitated the acquisition of valuable data, mainly on root cell type-specific transcript and protein expression. However, FACS of different leaf cell types is difficult because of chlorophyll autofluorescence that interferes with the sorting process. Furthermore, the cell wall composition is different in each cell type. This results in long incubation times for refractory cell types, and cell sorting itself can take several hours. To overcome these limitations, we developed Meselect (mechanical separation of leaf compound tissues, a rapid and effective method for the separation of leaf epidermal, vascular and mesophyll tissues. Meselect is a novel combination of mechanical separation and rapid protoplasting, which benefits from the unique cell wall composition of the different tissue types. Meselect has several advantages over cell sorting: it does not require expensive equipment such as a cell sorter and does not depend on specific fluorescent reporter lines, the use of blenders as well as the inherent mixing of different cell types and of intact and damaged cells can be avoided, and the time between wounding of the leaf and freezing of the sample is short. The efficacy and specificity of the method to enrich the different leaf tissue types has been confirmed using Arabidopsis leaves, but it has also been successfully used for leaves of other plants such as tomato or cassava. The method is therefore

  20. Antioxidant Capability of Ultra-high Temperature Milk and Ultra-high Temperature Soy Milk and their Fermented Products Determined by Four Distinct Spectrophotometric Methods

    Directory of Open Access Journals (Sweden)

    Sahar Torki Baghbadorani

    2017-01-01

    Full Text Available Background: Due to the recent emerging information on the antioxidant properties of soy products, substitution of soy milk for milk in the diet has been proposed by some nutritionists. We aimed to compare four distinct antioxidant measuring methods in the evaluation of antioxidant properties of industrial ultra-high temperature (UHT milk, UHT soy milk, and their fermented products by Lactobacillus plantarum A7. Materials and Methods: Ascorbate auto-oxidation inhibition assay, 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH free radical scavenging method, hydrogen peroxide neutralization assay and reducing activity test were compared for the homogeneity and accuracy of the results. Results: The results obtained by the four tested methods did not completely match with each other. The results of the DPPH assay and the reducing activity were more coordinated than the other methods. By the use of these methods, the antioxidant capability of UHT soy milk was measured more than UHT milk (33.51 ± 6.00% and 945 ± 56 μM cysteine compared to 8.70 ± 3.20% and 795 ± 82 μM cysteine. The negative effect of fermentation on the antioxidant potential of UHT soy milk was revealed as ascorbate auto-oxidation inhibition assay, DPPH method and reducing activity tests ended to approximately 52%, 58%, and 80% reduction in antioxidant potential of UHT soy milk, respectively. Conclusions: The antioxidative properties of UHT soy milk could not be solely due to its phenolic components. Peptides and amino acids derived from thermal processing in soy milk probably have a main role in its antioxidant activity, which should be studied in the future.

  1. Development of rapid methods for relaxation time mapping and motion estimation using magnetic resonance imaging

    Energy Technology Data Exchange (ETDEWEB)

    Gilani, Syed Irtiza Ali

    2008-09-15

    Recent technological developments in the field of magnetic resonance imaging have resulted in advanced techniques that can reduce the total time to acquire images. For applications such as relaxation time mapping, which enables improved visualisation of in vivo structures, rapid imaging techniques are highly desirable. TAPIR is a Look- Locker-based sequence for high-resolution, multislice T{sub 1} relaxation time mapping. Despite the high accuracy and precision of TAPIR, an improvement in the k-space sampling trajectory is desired to acquire data in clinically acceptable times. In this thesis, a new trajectory, termed line-sharing, is introduced for TAPIR that can potentially reduce the acquisition time by 40 %. Additionally, the line-sharing method was compared with the GRAPPA parallel imaging method. These methods were employed to reconstruct time-point images from the data acquired on a 4T high-field MR research scanner. Multislice, multipoint in vivo results obtained using these methods are presented. Despite improvement in acquisition speed, through line-sharing, for example, motion remains a problem and artefact-free data cannot always be obtained. Therefore, in this thesis, a rapid technique is introduced to estimate in-plane motion. The presented technique is based on calculating the in-plane motion parameters, i.e., translation and rotation, by registering the low-resolution MR images. The rotation estimation method is based on the pseudo-polar FFT, where the Fourier domain is composed of frequencies that reside in an oversampled set of non-angularly, equispaced points. The essence of the method is that unlike other Fourier-based registration schemes, the employed approach does not require any interpolation to calculate the pseudo-polar FFT grid coordinates. Translation parameters are estimated by the phase correlation method. However, instead of two-dimensional analysis of the phase correlation matrix, a low complexity subspace identification of the phase

  2. Autoclave method for rapid preparation of bacterial PCR-template DNA.

    Science.gov (United States)

    Simmon, Keith E; Steadman, Dewey D; Durkin, Sarah; Baldwin, Amy; Jeffrey, Wade H; Sheridan, Peter; Horton, Rene; Shields, Malcolm S

    2004-02-01

    An autoclave method for preparing bacterial DNA for PCR template is presented, it eliminates the use of detergents, organic solvents, and mechanical cellular disruption approaches, thereby significantly reducing processing time and costs while increasing reproducibility. Bacteria are lysed by rapid heating and depressurization in an autoclave. The lysate, cleared by microcentrifugation, was either used directly in the PCR reaction, or concentrated by ultrafiltration. This approach was compared with seven established methods of DNA template preparation from four bacterial sources which included boiling Triton X-100 and SDS, bead beating, lysozyme/proteinase K, and CTAB lysis method components. Bacteria examined were Enterococcus and Escherichia coli, a natural marine bacterial community and an Antarctic cyanobacterial-mat. DNAs were tested for their suitability as PCR templates by repetitive element random amplified polymorphic DNA (RAPD) and denaturing gradient gel electrophoresis (DGGE) analysis. The autoclave method produced PCR amplifiable template comparable or superior to the other methods, with greater reproducibility, much shorter processing time, and at a significantly lower cost.

  3. A tree-based method for the rapid screening of chemical fingerprints

    Directory of Open Access Journals (Sweden)

    Pedersen Christian NS

    2010-01-01

    Full Text Available Abstract Background The fingerprint of a molecule is a bitstring based on its structure, constructed such that structurally similar molecules will have similar fingerprints. Molecular fingerprints can be used in an initial phase of drug development for identifying novel drug candidates by screening large databases for molecules with fingerprints similar to a query fingerprint. Results In this paper, we present a method which efficiently finds all fingerprints in a database with Tanimoto coefficient to the query fingerprint above a user defined threshold. The method is based on two novel data structures for rapid screening of large databases: the kD grid and the Multibit tree. The kD grid is based on splitting the fingerprints into k shorter bitstrings and utilising these to compute bounds on the similarity of the complete bitstrings. The Multibit tree uses hierarchical clustering and similarity within each cluster to compute similar bounds. We have implemented our method and tested it on a large real-world data set. Our experiments show that our method yields approximately a three-fold speed-up over previous methods. Conclusions Using the novel kD grid and Multibit tree significantly reduce the time needed for searching databases of fingerprints. This will allow researchers to (1 perform more searches than previously possible and (2 to easily search large databases.

  4. Development of a micropulverized extraction method for rapid toxicological analysis of methamphetamine in hair.

    Science.gov (United States)

    Miyaguchi, Hajime; Kakuta, Masaya; Iwata, Yuko T; Matsuda, Hideaki; Tazawa, Hidekatsu; Kimura, Hiroko; Inoue, Hiroyuki

    2007-09-07

    We developed a rapid sample preparation method for the toxicological analysis of methamphetamine and amphetamine (the major metabolite of methamphetamine) in human hair by high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS), to facilitate fast screening and quantitation. Two milligrams of hair were mechanically micropulverized for 5 min in a 2-ml plastic tube together with 100 microl of an aqueous solvent containing 10% acetonitrile, 100 mM trifluoroacetic acid and the corresponding deuterium analogues as internal standards. The pulverizing highly disintegrated the hair components, simultaneously allowing the extraction of any drugs present in the hair. After filtering the suspension with a membrane-filter unit, the clear filtrate was directly analyzed by HPLC-MS/MS. No evaporation processes were required for sample preparation. Method optimization and validation study were carried out using real-case specimens and fortified samples in which the drugs had been artificially absorbed, respectively. Concentration ranges for quantitation were 0.040-125 and 0.040-25 ng/mg for methamphetamine and amphetamine, respectively. Real-case specimens were analyzed by the method presented here and by conventional ones to verify the applicability of our method to real-world analysis. Our method took less than 30 min for a set of chromatograms to be obtained from a washed hair sample.

  5. NATO Advanced Research Workshop, 19-22 May 1997: Rapid Method for Monitoring the Environment for Biological Hazards.

    Science.gov (United States)

    1997-05-22

    The NATO Advanced Research Workshop met for the purpose of bringing to light rapid methods for monitoring the environment for biological hazards such as biological warfare agents, naturally occurring diseases, detection and identification of different biological threats in the environment , dormancy in non-sporulating bacteria and bioluminescence techniques with respect to the rapid detection of microbes in air, water and food.

  6. Antioxidant Capability of Ultra-high Temperature Milk and Ultra-high Temperature Soy Milk and their Fermented Products Determined by Four Distinct Spectrophotometric Methods.

    Science.gov (United States)

    Baghbadorani, Sahar Torki; Ehsani, Mohammad Reza; Mirlohi, Maryam; Ezzatpanah, Hamid; Azadbakht, Leila; Babashahi, Mina

    2017-01-01

    Due to the recent emerging information on the antioxidant properties of soy products, substitution of soy milk for milk in the diet has been proposed by some nutritionists. We aimed to compare four distinct antioxidant measuring methods in the evaluation of antioxidant properties of industrial ultra-high temperature (UHT) milk, UHT soy milk, and their fermented products by Lactobacillus plantarum A7. Ascorbate auto-oxidation inhibition assay, 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH) free radical scavenging method, hydrogen peroxide neutralization assay and reducing activity test were compared for the homogeneity and accuracy of the results. The results obtained by the four tested methods did not completely match with each other. The results of the DPPH assay and the reducing activity were more coordinated than the other methods. By the use of these methods, the antioxidant capability of UHT soy milk was measured more than UHT milk (33.51 ± 6.00% and 945 ± 56 μM cysteine compared to 8.70 ± 3.20% and 795 ± 82 μM cysteine). The negative effect of fermentation on the antioxidant potential of UHT soy milk was revealed as ascorbate auto-oxidation inhibition assay, DPPH method and reducing activity tests ended to approximately 52%, 58%, and 80% reduction in antioxidant potential of UHT soy milk, respectively. The antioxidative properties of UHT soy milk could not be solely due to its phenolic components. Peptides and amino acids derived from thermal processing in soy milk probably have a main role in its antioxidant activity, which should be studied in the future.

  7. Rapid Assessment of Health Services in Punjab using a Mixed Method Approach

    Directory of Open Access Journals (Sweden)

    Rajesh Kumar

    2015-06-01

    Full Text Available Introduction: The out-of-pocket expenditure is quite high in Punjab. Hence, a rapid review of health facilities was undertaken to suggest remedial measures. Methods: Mixed method research approach was used to identify strengths and weaknesses of the health services in Punjab. All health institutions were included in the assessment from the three purposively sampled districts – one from each of the three regions of Punjab. Tools were developed to collect data from record review, observations, and in-depth interviews. Six building blocks framework proposed by the World Health Organization was used for data collection and analyses. Results: In general physical infrastructure, especially the buildings were found to be reasonably constructed at most of the healthcare facilities. However, the maintenance was not regular. The vacancies for general doctors, specialist doctors, nurses, and paramedics were 26%, 38%, 31% and 12% respectively. Supply of drugs was irregular and inadequate. A large proportion (45% of ‘user charges’ were spent on purchase of drugs and other consumables. Most registers were found to be updated, and reports were transmitted to higher levels usually on time. However, institutionalized system of monitoring and supervision was lacking. Govt. hospitals were providing in-patient care to about 35.5% of those who were estimated to need hospitalization. State had allocated about Rs. 1200 crores to health (0.46% of GDP, thus, spending only Rs. 433 per capita per year. Conclusions: Despite constraints, the government health service is catering to the needs of a large section of the population. Rapid health system assessment at periodic intervals using a mixed method approach can supplement routine monitoring of the health system.

  8. A rapid method of detecting autoantibody against FcεRIα for chronic spontaneous urticaria.

    Directory of Open Access Journals (Sweden)

    Mey-Fann Lee

    Full Text Available BACKGROUND: Chronic spontaneous urticaria (CU is a common skin disorder, with an estimated prevalence of 0.5-1.8% in most populations. Around 30-50% of CU patients have an autoimmune etiology, with autoantibodies (autoAbs against IgE, FcεRIα, and FcεRII/CD23. Although the in vivo autologous serum skin test (ASST and in vitro histamine release/activation assay are the most frequently used screening methods, these two have many limitations and do not directly measure susceptible autoAbs. This study aimed to establish an in vitro rapid screening test using recombinant autoantigen FcεRIα(rFcεRIα to improve the diagnosis of autoimmune urticaria. METHODS: Forty patients with CU and 20 healthy individuals were enrolled. After PCR-based cloning and the production of extracellular fragments of the FcεRIα protein using the E. coli expression system, serum autoAb to rFcεRIα was evaluated using in-house ELISA and rapid immunodot test. RESULTS: In ELISA-based detection, 14 out of 20 CU-ASST(+ patients exhibited anti- FcεRIα responses, whereas five of the 20 CU-ASST(- and two of the 20 non-CU patients showed autoantibody background in the assay. For the immunodot test, 55% (11/20 of the CU-ASST(+ sera exhibited anti-FcεRIα reactivity. There was no false positive among the CU-ASST(- and non-CU groups. Using clinical urticaria plus ASST(+ as the gold standard, in-house ELISA had 70% sensitivity, 82.5% specificity, and positive likelihood ratio of 4, while immunodot had 55% sensitivity, 100% specificity, and positive likelihood ratio >55. CONCLUSIONS: This study has developed a rapid immunodot method with high specificity for detecting autoAb to FcεRIαin patients with CU. Preliminary data indicates that this immunodot technique has the potential to be a routine diagnostic assay for autoimmune CU.

  9. Rapid Hydrothermal Synthesis of Zinc Oxide Nanowires by Annealing Methods on Seed Layers

    Directory of Open Access Journals (Sweden)

    Jang Bo Shim

    2011-01-01

    Full Text Available Well-aligned zinc oxide (ZnO nanowire arrays were successfully synthesized on a glass substrate using the rapid microwave heating process. The ZnO seed layers were produced by spinning the precursor solutions onto the substrate. Among coatings, the ZnO seed layers were annealed at 100°C for 5 minutes to ensure particle adhesion to the glass surface in air, nitrogen, and vacuum atmospheres. The annealing treatment of the ZnO seed layer was most important for achieving the high quality of ZnO nanowire arrays as ZnO seed nanoparticles of larger than 30 nm in diameter evolve into ZnO nanowire arrays. Transmission electron microscopy analysis revealed a single-crystalline lattice of the ZnO nanowires. Because of their low power (140 W, low operating temperatures (90°C, easy fabrication (variable microwave sintering system, and low cost (90% cost reduction compared with gas condensation methods, high quality ZnO nanowires created with the rapid microwave heating process show great promise for use in flexible solar cells and flexible display devices.

  10. A Rapid and Efficient Method for Evaluation of Suspect Testimony: Palynological Scanning.

    Science.gov (United States)

    Wiltshire, Patricia E J; Hawksworth, David L; Edwards, Kevin J

    2015-11-01

    A rapid method for evaluating suspect testimony is valuable at any stage in an inquiry and can result in a change of direction in an investigation. Rape cases, in particular, can present problems where a defendant renders DNA analysis redundant by claiming that the claimant consented to have sexual relations. Forensic palynology is valuable in confirming or eliminating locations as being crime scenes, thus checking the testimony of both parties. In contrast to some forensic disciplines, forensic palynology can provide critical information without time-consuming full analysis. Two cases are described where the palynological assemblages from comparator samples of pertinent places were compared with those obtained from clothing of claimants and defendants. The results of rapid microscopical scanning of relevant preparations led to early confessions, thus obviating the need for costly analyses and protracted court proceedings. A third case demonstrates the unbiased nature of this technique where a man, although innocent of any offense, lied about having visited the crime scene for fear of prosecution. This highlights the need for sensitive policing in claims of rape. © 2015 American Academy of Forensic Sciences.

  11. Rapid and Sensitive Lateral Flow Immunoassay Method for Procalcitonin (PCT Based on Time-Resolved Immunochromatography

    Directory of Open Access Journals (Sweden)

    Xiang-Yang Shao

    2017-02-01

    Full Text Available Procalcitonin (PCT is a current, frequently-used marker for severe bacterial infection. The aim of this study was to develop a cost-effective detection kit for rapid quantitative and on-site detection of PCT. To develop the new PCT quantitative detecting kit, a double-antibody sandwich immunofluorescent assay was employed based on time-resolved immunofluorescent assay (TRFIA combined with lateral flow immunoassay (LFIA. The performance of the new developed kit was evaluated in the aspects of linearity, precision, accuracy, and specificity. Two-hundred thirty-four serum samples were enrolled to carry out the comparison test. The new PCT quantitative detecting kit exhibited a higher sensitivity (0.08 ng/mL. The inter-assay coefficient of variation (CV and the intra-assay CV were 5.4%–7.7% and 5.7%–13.4%, respectively. The recovery rates ranged from 93% to 105%. Furthermore, a high correlation (n = 234, r = 0.977, p < 0.0001 and consistency (Kappa = 0.875 were obtained when compared with the PCT kit from Roche Elecsys BRAHMS. Thus, the new quantitative method for detecting PCT has been successfully established. The results indicated that the newly-developed system based on TRFIA combined with LFIA was suitable for rapid and on-site detection for PCT, which might be a useful platform for other biomarkers in point-of-care tests.

  12. Bacterial Cytological Profiling (BCP as a Rapid and Accurate Antimicrobial Susceptibility Testing Method for Staphylococcus aureus

    Directory of Open Access Journals (Sweden)

    D.T. Quach

    2016-02-01

    Full Text Available Successful treatment of bacterial infections requires the timely administration of appropriate antimicrobial therapy. The failure to initiate the correct therapy in a timely fashion results in poor clinical outcomes, longer hospital stays, and higher medical costs. Current approaches to antibiotic susceptibility testing of cultured pathogens have key limitations ranging from long run times to dependence on prior knowledge of genetic mechanisms of resistance. We have developed a rapid antimicrobial susceptibility assay for Staphylococcus aureus based on bacterial cytological profiling (BCP, which uses quantitative fluorescence microscopy to measure antibiotic induced changes in cellular architecture. BCP discriminated between methicillin-susceptible (MSSA and -resistant (MRSA clinical isolates of S. aureus (n = 71 within 1–2 h with 100% accuracy. Similarly, BCP correctly distinguished daptomycin susceptible (DS from daptomycin non-susceptible (DNS S. aureus strains (n = 20 within 30 min. Among MRSA isolates, BCP further identified two classes of strains that differ in their susceptibility to specific combinations of beta-lactam antibiotics. BCP provides a rapid and flexible alternative to gene-based susceptibility testing methods for S. aureus, and should be readily adaptable to different antibiotics and bacterial species as new mechanisms of resistance or multidrug-resistant pathogens evolve and appear in mainstream clinical practice.

  13. OSO paradigm--A rapid behavioral screening method for acute psychosocial stress reactivity in mice.

    Science.gov (United States)

    Brzózka, M M; Unterbarnscheidt, T; Schwab, M H; Rossner, M J

    2016-02-09

    Chronic psychosocial stress is an important environmental risk factor for the development of psychiatric diseases. However, studying the impact of chronic psychosocial stress in mice is time consuming and thus not optimally suited to 'screen' increasing numbers of genetically manipulated mouse models for psychiatric endophenotypes. Moreover, many studies focus on restraint stress, a strong physical stressor with limited relevance for psychiatric disorders. Here, we describe a simple and a rapid method based on the resident-intruder paradigm to examine acute effects of mild psychosocial stress in mice. The OSO paradigm (open field--social defeat--open field) compares behavioral consequences on locomotor activity, anxiety and curiosity before and after exposure to acute social defeat stress. We first evaluated OSO in male C57Bl/6 wildtype mice where a single episode of social defeat reduced locomotor activity, increased anxiety and diminished exploratory behavior. Subsequently, we applied the OSO paradigm to mouse models of two schizophrenia (SZ) risk genes. Transgenic mice with neuronal overexpression of Neuregulin-1 (Nrg1) type III showed increased risk-taking behavior after acute stress exposure suggesting that NRG1 dysfunction is associated with altered affective behavior. In contrast, Tcf4 transgenic mice displayed a normal stress response which is in line with the postulated predominant contribution of TCF4 to cognitive deficits of SZ. In conclusion, the OSO paradigm allows for rapid screening of selected psychosocial stress-induced behavioral endophenotypes in mouse models of psychiatric diseases. Copyright © 2015 IBRO. Published by Elsevier Ltd. All rights reserved.

  14. Performance of a Micro-UAV lifting system built with the usage of rapid prototyping methods

    Science.gov (United States)

    Dalewski, R. T.; Gumowski, K.; Barczak, T.; Godek, J.

    2014-08-01

    This article presents results of the aerodynamic testing of a micro unmanned aerial vehicle rotor efficiency. The rotors were prepared as a set of two rotors in a counter-rotating ducted drive. Prototypes of the drives were made using two rapid prototyping techniques - FDM - fused deposition modelling method and SLS - selective laser sintering. Rotors were made then treated by introducing additional finishing cyanoacrylate coating and abrasive processing. Main differences between those models were observed in fan shape, porosity, surface roughness and mechanical properties - stiffness. An influence of these factors was observed on an aerodynamic efficiency. For the obtained prototypes both simulations and experimental testing were conducted with thrust, power, torque measurements, as well as the measurement of velocity and pressure distribution at the outlet of the duct. The results show the possibility of using rapid prototyping techniques to produce prototypes of drives operating in the low and medium Reynolds numbers (6000-60000), and the aerodynamic shape relevant factors affecting the preparation and performance of such drives. In addition, simulation studies were performed using the Fluent environment where experimental results were confronted with the results of simulation studies.

  15. Use of a modified cluster sampling method to perform rapid needs assessment after Hurricane Andrew.

    Science.gov (United States)

    Hlady, W G; Quenemoen, L E; Armenia-Cope, R R; Hurt, K J; Malilay, J; Noji, E K; Wurm, G

    1994-04-01

    To rapidly obtain population-based estimates of needs in the early aftermath of Hurricane Andrew in South Florida. We used a modified cluster-sampling method (the Expanded Programme on Immunization [EPI] method) for three surveys. We selected a systematic sample of 30 quarter-mile square clusters for each survey and, beginning from a random start, interviewed members of seven consecutive occupied households in each cluster. Two surveys were of the most affected area (1990 population, 32,672) at three and ten days after the hurricane struck; one survey was of a less affected area (1990 population, 15,576) seven days after the hurricane struck. Results were available within 24 hours of beginning each survey. Initial findings emphasized the need for restoring utilities and sanitation and helped to focus medical relief on primary care and preventive services. The second survey of the most affected area showed improvement in the availability of food, water, electricity, and sanitation (P < or = .05). There was no evidence of disease outbreaks. For the first time, the EPI method provided population-based information to guide and evaluate relief operations after a sudden-impact natural disaster. An improvement over previous approaches, the EPI method warrants further evaluation as a needs assessment tool in acute disasters.

  16. ATP bioluminescence method: tool for rapid screening of organic and microbial contaminants on deteriorated mural paintings.

    Science.gov (United States)

    Unković, Nikola; Ljaljević Grbić, Milica; Stupar, Miloš; Vukojević, Jelena; Subakov-Simić, Gordana; Jelikić, Aleksa; Stanojević, Dragan

    2015-11-24

    The extent of the microbial contamination of the seventeenth-century wall paintings in the nave of the old Church of the Holy Ascension (Veliki Krčimir, Serbia) was evaluated via newly implemented ATP bioluminescence method, and traditional cultivation-based method, utilising commercially available dip slides. To assess the validity of ATP, as a biomarker for rapid detection of mural surface contamination, obtained zones of cleanliness values, in range from 1.0 to 5.3, were compared to documented total microbial counts, ranging between seven and 247 CFU/cm 2 . Small coefficients of determination, 0.0106-0.0385, suggest poor correlation between microbial counts and surface ATP levels; however, zones of cleanliness values are of great help in determining the high points of contamination, aka 'hotspots', which should be given special attention during sampling and investigation using other methods. In addition, various aspects of the possible implementation of the ATP bioluminescence method in an integrated system of wall painting conservation are discussed.

  17. A Rapid Dialysis Method for Analysis of Artificial Sweeteners in Foods (2nd Report).

    Science.gov (United States)

    Tahara, Shoichi; Yamamoto, Sumiyo; Yamajima, Yukiko; Miyakawa, Hiroyuki; Uematsu, Yoko; Monma, Kimio

    2017-01-01

    Following the previous report, a rapid dialysis method was developed for the extraction and purification of four artificial sweeteners, namely, sodium saccharide (Sa), acesulfame potassium (AK), aspartame (APM), and dulcin (Du), which are present in various foods. The method was evaluated by the addition of 0.02 g/kg of these sweeteners to a cookie sample, in the same manner as in the previous report. Revisions from the previous method were: reduction of the total dialysis volume from 200 to 100 mL, change of tube length from 55 to 50 cm, change of dialysate from 0.01 mol/L hydrochloric aqueous solution containing 10% sodium chloride to 30% methanol solution, and change of dialysis conditions from ambient temperature with occasional shaking to 50℃ with shaking at 160 rpm. As a result of these revisions, the recovery reached 99.3-103.8% with one hour dialysis. The obtained recovery yields were comparable to the recovery yields in the previous method with four hour dialysis.

  18. ReagentTF: a rapid and versatile optical clearing method for biological imaging(Conference Presentation)

    Science.gov (United States)

    Yu, Tingting; Zhu, Jingtan; Li, Yusha; Qi, Yisong; Xu, Jianyi; Gong, Hui; Luo, Qingming; Zhu, Dan

    2017-02-01

    The emergence of various optical clearing methods provides a great potential for imaging deep inside tissues by combining with multiple-labelling and microscopic imaging techniques. They were generally developed for specific imaging demand thus presented some non-negligible limitations such as long incubation time, tissue deformation, fluorescence quenching, incompatibility with immunostaining or lipophilic tracers. In this study, we developed a rapid and versatile clearing method, termed ReagentTF, for deep imaging of various fluorescent samples. This method can not only efficiently clear embryos, neonatal whole-brains and adult thick brain sections by simple immersion in aqueous mixtures with minimal volume change, but also can preserve fluorescence of various fluorescent proteins and simultaneously be compatible with immunostaining and lipophilic neuronal dyes. We demonstrate the effectiveness of this method in reconstructing the cell distributions of mouse hippocampus, visualizing the neural projection from CA1 (Cornu Ammonis 1) to HDB (nucleus of the horizontal limb of the diagonal band), and observing the growth of forelimb plexus in whole-mount embryos. These results suggest that ReagentTF is useful for large-volume imaging and will be an option for the deep imaging of biological tissues.

  19. Computationally rapid method of estimating signal-to-noise ratio for phased array image reconstructions.

    Science.gov (United States)

    Wiens, Curtis N; Kisch, Shawn J; Willig-Onwuachi, Jacob D; McKenzie, Charles A

    2011-10-01

    Measuring signal-to-noise ratio (SNR) for parallel MRI reconstructions is difficult due to spatially dependent noise amplification. Existing approaches for measuring parallel MRI SNR are limited because they are not applicable to all reconstructions, require significant computation time, or rely on repeated image acquisitions. A new SNR estimation approach is proposed, a hybrid of the repeated image acquisitions method detailed in the National Electrical Manufacturers Association (NEMA) standard and the Monte Carlo based pseudo-multiple replica method, in which the difference between images reconstructed from the unaltered acquired data and that same data reconstructed after the addition of calibrated pseudo-noise is used to estimate the noise in the parallel MRI image reconstruction. This new noise estimation method can be used to rapidly compute the pixel-wise SNR of the image generated from any parallel MRI reconstruction of a single acquisition. SNR maps calculated with the new method are validated against existing SNR calculation techniques. Copyright © 2011 Wiley-Liss, Inc.

  20. A rapid and sensitive method for the detection of aromatic amines in cosmetics.

    Science.gov (United States)

    Hailong, Xiao; Fen, Qian; Ying, Xu; Jianhong, Pan; Haiyun, Tu; Hongqing, Wang; Saijun, Lin; Jichun, Han

    2014-02-01

    Aromatic amines (AAs) are common chemical pollutants and banned ingredients in cosmetics. In this study, a rapid, simple and stable method for the detection of nine AAs in cosmetics was established based on the optimization of cation exchange solid-phase extraction and liquid chromatography tandem mass spectrometry. The method displayed good linearity within a range of 2-1,000 µg/kg, with limits of quantitation at the level of µg/kg for cosmetic samples. The recoveries obtained for all analyzed amines ranged between 83.6 and 97.8%, and the repeatability (r) and reproducibility (R) values indicated that all nine AAs showed good precision (r ≤ 4.5% and R ≤ 7.7%). The method was applied for the detection of 36 cosmetic samples. It was found that the primary pollutants of AAs were 3, 3'-dichlorobenzidine and 4-aminoazobenzene. The total amine concentration in cosmetic samples ranged from 880 to 5,200 µg/kg. The proposed method is applicable for the analysis of most cosmetic samples.

  1. A simple and rapid method to characterize lipid fate in skeletal muscle.

    Science.gov (United States)

    Massart, Julie; Zierath, Juleen R; Chibalin, Alexander V

    2014-06-24

    Elevated fatty acids contribute to the development of type 2 diabetes and affect skeletal muscle insulin sensitivity. Since elevated intramuscular lipids and insulin resistance is strongly correlated, aberrant lipid storage or lipid intermediates may be involved in diabetes pathogenesis. The aim of this study was to develop a method to determine the dynamic metabolic fate of lipids in primary human skeletal muscle cells and in intact mouse skeletal muscle. We report a simple and fast method to characterize lipid profiles in skeletal muscle using thin layer chromatography. The described method was specifically developed to assess lipid utilization in cultured and intact skeletal muscle. We determined the effect of a pan-diacylglycerol kinase (DGK) class I inhibitor (R59949) on lipid metabolism to validate the method. In human skeletal muscle cells, DGK inhibition impaired diacylglycerol (DAG) conversion to phosphatidic acid and increased triglyceride synthesis. In intact glycolytic mouse skeletal muscle, DGK inhibition triggered the accumulation of DAG species. Conversely, the DGK inhibitor did not affect DAG content in oxidative muscle. This simple assay detects rapid changes in the lipid species composition of skeletal muscle with high sensitivity and specificity. Determination of lipid metabolism in skeletal muscle may further elucidate the mechanisms contributing to the pathogenesis of insulin resistance in type 2 diabetes or obesity.

  2. A modified indirect mathematical model for evaluation of ethanol production efficiency in industrial-scale continuous fermentation processes.

    Science.gov (United States)

    Canseco Grellet, M A; Castagnaro, A; Dantur, K I; De Boeck, G; Ahmed, P M; Cárdenas, G J; Welin, B; Ruiz, R M

    2016-10-01

    To calculate fermentation efficiency in a continuous ethanol production process, we aimed to develop a robust mathematical method based on the analysis of metabolic by-product formation. This method is in contrast to the traditional way of calculating ethanol fermentation efficiency, where the ratio between the ethanol produced and the sugar consumed is expressed as a percentage of the theoretical conversion yield. Comparison between the two methods, at industrial scale and in sensitivity studies, showed that the indirect method was more robust and gave slightly higher fermentation efficiency values, although fermentation efficiency of the industrial process was found to be low (~75%). The traditional calculation method is simpler than the indirect method as it only requires a few chemical determinations in samples collected. However, a minor error in any measured parameter will have an important impact on the calculated efficiency. In contrast, the indirect method of calculation requires a greater number of determinations but is much more robust since an error in any parameter will only have a minor effect on the fermentation efficiency value. The application of the indirect calculation methodology in order to evaluate the real situation of the process and to reach an optimum fermentation yield for an industrial-scale ethanol production is recommended. Once a high fermentation yield has been reached the traditional method should be used to maintain the control of the process. Upon detection of lower yields in an optimized process the indirect method should be employed as it permits a more accurate diagnosis of causes of yield losses in order to correct the problem rapidly. The low fermentation efficiency obtained in this study shows an urgent need for industrial process optimization where the indirect calculation methodology will be an important tool to determine process losses. © 2016 The Society for Applied Microbiology.

  3. A new rapid method for Clostridium difficile DNA extraction and detection in stool: toward point-of-care diagnostic testing

    National Research Council Canada - National Science Library

    Freifeld, Alison G; Simonsen, Kari A; Booth, Christine S; Zhao, Xing; Whitney, Scott E; Karre, Teresa; Iwen, Peter C; Viljoen, Hendrik J

    2012-01-01

    We describe a new method for the rapid diagnosis of Clostridium difficile infection, with stool sample preparation and DNA extraction by heat and physical disruption in a single-use lysis microreactor (LMR...

  4. A novel method for ATLAS FSI alignment based on rapid, direct phase monitoring

    CERN Document Server

    Gibson, S M; The ATLAS collaboration; Horton, K; Lewis, A; Liang, Z; Livermore, S; Mattravers, C; Nickerson, R B

    2010-01-01

    Frequency Scanning Interferometry is a precise, multiple distance measurement technique, originally developed for ATLAS, which is suited to a variety of applications in the survey and alignment of future accelerators and particle detectors. The ATLAS inner detector is instrumented with an automated FSI alignment system, capable of simultaneously measuring hundreds of interferometers within the operational particle tracker. The alignment system began data taking in 2008 and we present the latest results from the on-detector system during LHC running. A new method has been developed based on rapid, direct monitoring of the interferometer phase, which allows the measurement of short term motions with improved precision, at a fraction of the wavelength of light (typically sensitive to < 50 nm). We outline the theory behind this novel technique and demonstrate precise measurements from ATLAS, which reveal interesting micron-level movements of the inner detector, correlated with thermal cycles and magnetic f...

  5. Apparatus and method for rapid cooling of large area substrates in vacuum

    Science.gov (United States)

    Barth, Kurt L.; Enzenroth, Robert A.; Sampath, Walajabad S.

    2010-09-28

    The present invention is directed to an apparatus and method for rapid cooling of a large substrate in a vacuum environment. A first cooled plate is brought into close proximity with one surface of a flat substrate. The spatial volume between the first cooling plate and the substrate is sealed and brought to a higher pressure than the surrounding vacuum level to increase the cooling efficiency. A second cooled plate is brought into close proximity with the opposite surface of the flat substrate. A second spatial volume between the second cooling plate and the substrate is sealed and the gas pressure is equalized to the gas pressure in the first spatial volume. The equalization of the gas pressure on both sides of the flat substrate eliminates deflection of the substrate and bending stress in the substrate.

  6. A rapid and economic in-house DNA purification method using glass syringe filters.

    Directory of Open Access Journals (Sweden)

    Yun-Cheol Kim

    Full Text Available BACKGROUND: Purity, yield, speed and cost are important considerations in plasmid purification, but it is difficult to achieve all of these at the same time. Currently, there are many protocols and kits for DNA purification, however none maximize all four considerations. METHODOLOGY/PRINCIPAL FINDINGS: We now describe a fast, efficient and economic in-house protocol for plasmid preparation using glass syringe filters. Plasmid yield and quality as determined by enzyme digestion and transfection efficiency were equivalent to the expensive commercial kits. Importantly, the time required for purification was much less than that required using a commercial kit. CONCLUSIONS/SIGNIFICANCE: This method provides DNA yield and quality similar to that obtained with commercial kits, but is more rapid and less costly.

  7. A robust and rapid method of producing soluble, stable, and functional G-protein coupled receptors.

    Directory of Open Access Journals (Sweden)

    Karolina Corin

    Full Text Available Membrane proteins, particularly G-protein coupled receptors (GPCRs, are notoriously difficult to express. Using commercial E. coli cell-free systems with the detergent Brij-35, we could rapidly produce milligram quantities of 13 unique GPCRs. Immunoaffinity purification yielded receptors at >90% purity. Secondary structure analysis using circular dichroism indicated that the purified receptors were properly folded. Microscale thermophoresis, a novel label-free and surface-free detection technique that uses thermal gradients, showed that these receptors bound their ligands. The secondary structure and ligand-binding results from cell-free produced proteins were comparable to those expressed and purified from HEK293 cells. Our study demonstrates that cell-free protein production using commercially available kits and optimal detergents is a robust technology that can be used to produce sufficient GPCRs for biochemical, structural, and functional analyses. This robust and simple method may further stimulate others to study the structure and function of membrane proteins.

  8. Rapid method for surveying CO concentrations in high-rise buildings

    Energy Technology Data Exchange (ETDEWEB)

    Flachsbart, P.G.; Ott, W.R.

    1986-01-01

    A rapid method for employing personal exposure monitors (PEMs) to measure carbon monoxide (CO) concentrations in high-rise buildings is described. The purpose is to determine whether or not a CO problem exists in a building, and, if so, what corrective actions should be taken. The methodology was applied to a 15-story building in Palo Alto, CA, where elevated CO concentrations were discovered on the first 11 floors. The source appeared to be an underground parking garage. A follow-up survey four years later revealed that mitigative measures designed to reduce these concentrations had been successful. The survey methodology is inexpensive and can be applied to a number of buildings in a city.

  9. Evaluation of rapid alternative methods for drug susceptibility testing in clinical isolates of Mycobacterium tuberculosis

    Directory of Open Access Journals (Sweden)

    Luciano Mengatto

    2006-08-01

    Full Text Available A study was carried out to compare the performance of a commercial method (MGIT and four inexpensive drug susceptibility methods: nitrate reductase assay (NRA, microscopic observation drug susceptibility (MODS assay, MTT test, and broth microdilution method (BMM. A total of 64 clinical isolates of Mycobacterium tuberculosis were studied. The Lowenstein-Jensen proportion method (PM was used as gold standard. MGIT, NRA, MODS, and MTT results were available on an average of less than 10 days, whereas BMM results could be reported in about 20 days. Most of the evaluated tests showed excellent performance for isoniazid and rifampicin, with sensitivity and specificity values > 90%. With most of the assays, sensitivity for ethambutol was low (62-87% whereas for streptomycin, sensitivity values ranged from 84 to 100%; NRA-discrepancies were associated with cultures with a low proportion of EMB-resistant organisms while most discrepancies with quantitative tests (MMT and BMM were seen with isolates whose minimal inhibitory concentrations fell close the cutoff. MGIT is reliable but still expensive. NRA is the most inexpensive and easiest method to perform without changing the organization of the routine PM laboratory performance. While MODS, MTT, and BMM, have the disadvantage from the point of view of biosafety, they offer the possibility of detecting partial resistant strains. This study shows a very good level of agreement of the four low-cost methods compared to the PM for rapid detection of isoniazid, rifampicin and streptomycin resistance (Kappa values > 0.8; more standardization is needed for ethambutol.

  10. A rapid and efficient method for assessing pathogenicity of ustilago maydis on maize and teosinte lines.

    Science.gov (United States)

    Chavan, Suchitra; Smith, Shavannor M

    2014-01-03

    Maize is a major cereal crop worldwide. However, susceptibility to biotrophic pathogens is the primary constraint to increasing productivity. U. maydis is a biotrophic fungal pathogen and the causal agent of corn smut on maize. This disease is responsible for significant yield losses of approximately $1.0 billion annually in the U.S.(1) Several methods including crop rotation, fungicide application and seed treatments are currently used to control corn smut(2). However, host resistance is the only practical method for managing corn smut. Identification of crop plants including maize, wheat, and rice that are resistant to various biotrophic pathogens has significantly decreased yield losses annually(3-5). Therefore, the use of a pathogen inoculation method that efficiently and reproducibly delivers the pathogen in between the plant leaves, would facilitate the rapid identification of maize lines that are resistant to U. maydis. As, a first step toward indentifying maize lines that are resistant to U. maydis, a needle injection inoculation method and a resistance reaction screening method was utilized to inoculate maize, teosinte, and maize x teosinte introgression lines with a U. maydis strain and to select resistant plants. Maize, teosinte and maize x teosinte introgression lines, consisting of about 700 plants, were planted, inoculated with a strain of U. maydis, and screened for resistance. The inoculation and screening methods successfully identified three teosinte lines resistant to U. maydis. Here a detailed needle injection inoculation and resistance reaction screening protocol for maize, teosinte, and maize x teosinte introgression lines is presented. This study demonstrates that needle injection inoculation is an invaluable tool in agriculture that can efficiently deliver U. maydis in between the plant leaves and has provided plant lines that are resistant to U. maydis that can now be combined and tested in breeding programs for improved disease resistance.

  11. A method for rapid measurement of laser ablation rate of hard dental tissue

    Science.gov (United States)

    Perhavec, T.; Gorkič, A.; Bračun, D.; Diaci, J.

    2009-06-01

    The aim of the study reported here is the development of a new method which allows rapid and accurate in-vitro measurements of three-dimensional (3D) shape of laser ablated craters in hard dental tissues and the determination of crater volume, ablation rate and speed. The method is based on the optical triangulation principle. A laser sheet projector illuminates the surface of a tooth, mounted on a linear translation stage. As the tooth is moved by the translation stage a fast digital video camera captures series of images of the illuminated surface. The images are analyzed to determine a 3D model of the surface. Custom software is employed to analyze the 3D model and to determine the volume of the ablated craters. Key characteristics of the method are discussed as well as some practical aspects pertinent to its use. The method has been employed in an in-vitro study to examine the ablation rates and speeds of the two main laser types currently employed in dentistry, Er:YAG and Er,Cr:YSGG. Ten samples of extracted human molar teeth were irradiated with laser pulse energies from 80 mJ to the maximum available energy (970 mJ with the Er:YAG, and 260 mJ with the Er,Cr:YSGG). About 2000 images of each ablated tooth surface have been acquired along a translation range of 10 mm, taking about 10 s and providing close to 1 million surface measurement points. Volumes of 170 ablated craters (half of them in dentine and the other half in enamel) were determined from this data and used to examine the ablated volume per pulse energy and ablation speed. The results show that, under the same conditions, the ablated volume per pulse energy achieved by the Er:YAG laser exceeds that of the Er,Cr:YSGG laser in almost all regimes for dentine and enamel. The maximum Er:YAG laser ablation speeds (1.2 mm 3/s in dentine and 0.7 mm 3/s in enamel) exceed those obtained by the Er,Cr:YSGG laser (0.39 mm 3/s in dentine and 0.12 mm 3/s in enamel). Since the presented method proves to be easy to

  12. Rapid, convenient method for screening imidazole-containing compounds for heme oxygenase inhibition.

    Science.gov (United States)

    Vlahakis, Jason Z; Rahman, Mona N; Roman, Gheorghe; Jia, Zongchao; Nakatsu, Kanji; Szarek, Walter A

    2011-01-01

    Sensitive assays for measuring heme oxygenase activity have been based on the gas-chromatographic detection of carbon monoxide using elaborate, expensive equipment. The present study describes a rapid and convenient method for screening imidazole-containing candidates for inhibitory activity against heme oxygenase using a plate reader, based on the spectroscopic evaluation of heme degradation. A PowerWave XS plate reader was used to monitor the absorbance (as a function of time) of heme bound to purified truncated human heme oxygenase-1 (hHO-1) in the individual wells of a standard 96-well plate (with or without the addition of a test compound). The degradation of heme by heme oxygenase-1 was initiated using l-ascorbic acid, and the collected relevant absorbance data were analyzed by three different methods to calculate the percent control activity occurring in wells containing test compounds relative to that occurring in control wells with no test compound present. In the cases of wells containing inhibitory compounds, significant shifts in λ(max) from 404 to near 412 nm were observed as well as a decrease in the rate of heme degradation relative to that of the control. Each of the three methods of data processing (overall percent drop in absorbance over 1.5h, initial rate of reaction determined over the first 5 min, and estimated pseudo first-order reaction rate constant determined over 1.5h) gave similar and reproducible results for percent control activity. The fastest and easiest method of data analysis was determined to be that using initial rates, involving data acquisition for only 5 min once reactions have been initiated using l-ascorbic acid. The results of the study demonstrate that this simple assay based on the spectroscopic detection of heme represents a rapid, convenient method to determine the relative inhibitory activity of candidate compounds, and is useful in quickly screening a series or library of compounds for heme oxygenase inhibition

  13. A rapid method of fruit cell isolation for cell size and shape measurements

    Directory of Open Access Journals (Sweden)

    Johnston Jason W

    2009-04-01

    Full Text Available Abstract Background Cell size is a structural component of fleshy fruit, contributing to important traits such as fruit size and texture. There are currently a number of methods for measuring cell size; most rely either on tissue sectioning or digestion of the tissue with cell wall degrading enzymes or chemicals to release single cells. Neither of these approaches is ideal for assaying large fruit numbers as both require a considerable time to prepare the tissue, with current methods of cell wall digestions taking 24 to 48 hours. Additionally, sectioning can lead to a measurement of a plane that does not represent the widest point of the cell. Results To develop a more rapid way of measuring fruit cell size we have developed a protocol that solubilises pectin in the middle lamella of the plant cell wall releasing single cells into a buffered solution. Gently boiling small fruit samples in a 0.05 M Na2CO3 solution, osmotically balanced with 0.3 M mannitol, produced good cell separation with little cellular damage in less than 30 minutes. The advantage of combining a chemical treatment with boiling is that the cells are rapidly killed. This stopped cell shape changes that could potentially occur during separation. With this method both the rounded and angular cells of the apple cultivars SciRos 'Pacific Rose' and SciFresh 'Jazz'™ were observed in the separated cells. Using this technique, an in-depth analysis was performed measuring cell size from 5 different apple cultivars. Cell size was measured using the public domain ImageJ software. For each cultivar a minimum of 1000 cells were measured and it was found that each cultivar displayed a different distribution of cell size. Cell size within cultivars was similar and there was no correlation between flesh firmness and cell size. This protocol was tested on tissue from other fleshy fruit including tomato, rock melon and kiwifruit. It was found that good cell separation was achieved with flesh

  14. Use of predictive models and rapid methods to nowcast bacteria levels at coastal beaches

    Science.gov (United States)

    Francy, Donna S.

    2009-01-01

    The need for rapid assessments of recreational water quality to better protect public health is well accepted throughout the research and regulatory communities. Rapid analytical methods, such as quantitative polymerase chain reaction (qPCR) and immunomagnetic separation/adenosine triphosphate (ATP) analysis, are being tested but are not yet ready for widespread use.Another solution is the use of predictive models, wherein variable(s) that are easily and quickly measured are surrogates for concentrations of fecal-indicator bacteria. Rainfall-based alerts, the simplest type of model, have been used by several communities for a number of years. Deterministic models use mathematical representations of the processes that affect bacteria concentrations; this type of model is being used for beach-closure decisions at one location in the USA. Multivariable statistical models are being developed and tested in many areas of the USA; however, they are only used in three areas of the Great Lakes to aid in notifications of beach advisories or closings. These “operational” statistical models can result in more accurate assessments of recreational water quality than use of the previous day's Escherichia coli (E. coli)concentration as determined by traditional culture methods. The Ohio Nowcast, at Huntington Beach, Bay Village, Ohio, is described in this paper as an example of an operational statistical model. Because predictive modeling is a dynamic process, water-resource managers continue to collect additional data to improve the predictive ability of the nowcast and expand the nowcast to other Ohio beaches and a recreational river. Although predictive models have been shown to work well at some beaches and are becoming more widely accepted, implementation in many areas is limited by funding, lack of coordinated technical leadership, and lack of supporting epidemiological data.

  15. Rapid radiometric methods to detect and differentiate Mycobacterium tuberculosis/M. bovis from other mycobacterial species

    Energy Technology Data Exchange (ETDEWEB)

    Siddiqi, S.H.; Hwangbo, C.C.; Silcox, V.; Good, R.C.; Snider, D.E. Jr.; Middlebrook, G.

    1984-10-01

    Rapid methods for the differentiation of Mycobacterium tuberculosis/M. bovis (TB complex) from other mycobacteria (MOTT bacilli) were developed and evaluated in a three-phase study. In the first phase, techniques for identification of Mycobacterium species were developed by using radiometric technology and BACTEC Middlebrook 7H12 liquid medium. Based on /sup 14/CO/sub 2/ evolution, characteristic growth patterns were established for 13 commonly encountered mycobacterial species. Mycobacteria belonging to the TB complex were differentiated from other mycobacteria by cellular morphology and rate of /sup 14/CO/sub 2/ evolution. For further differentiation, radiometric tests for niacin production and inhibition by Q-nitro-alpha-acetyl amino-beta-hydroxy-propiophenone (NAP) were developed. In the second phase, 100 coded specimens on Lowenstein-Jensen medium were identified as members of the TB complex, MOTT bacilli, bacteria other than mycobacteria, or ''no viable organisms'' within 3 to 12 (average 6.4) days of receipt from the Centers for Disease Control. Isolation and identification of mycobacteria from 20 simulated sputum specimens were carried out in phase III. Out of 20 sputum specimens, 16 contained culturable mycobacteria, and all of the positives were detected by the BACTEC method in an average of 7.3 days. The positive mycobacterial cultures were isolated and identified as TB complex or MOTT bacilli in an average of 12.8 days. The radiometric NAP test was found to be highly sensitive and specific for a rapid identification of TB complex, whereas the radiometric niacin test was found to have some inherent problems. Radiometric BACTEC and conventional methodologies were in complete agreement in Phase II as well as in Phase III.

  16. Effects of a Proline Endopeptidase on the Detection and Quantitation of Gluten by Antibody-Based Methods during the Fermentation of a Model Sorghum Beer.

    Science.gov (United States)

    Panda, Rakhi; Fiedler, Katherine L; Cho, Chung Y; Cheng, Raymond; Stutts, Whitney L; Jackson, Lauren S; Garber, Eric A E

    2015-12-09

    The effectiveness of a proline endopeptidase (PEP) in hydrolyzing gluten and its putative immunopathogenic sequences was examined using antibody-based methods and mass spectrometry (MS). Based on the results of the antibody-based methods, fermentation of wheat gluten containing sorghum beer resulted in a reduction in the detectable gluten concentration. The addition of PEP further reduced the gluten concentration. Only one sandwich ELISA was able to detect the apparent low levels of gluten present in the beers. A competitive ELISA using a pepsin-trypsin hydrolysate calibrant was unreliable because the peptide profiles of the beers were inconsistent with that of the hydrolysate calibrant. Analysis by MS indicated that PEP enhanced the loss of a fragment of an immunopathogenic 33-mer peptide in the beer. However, Western blot results indicated partial resistance of the high molecular weight (HMW) glutenins to the action of PEP, questioning the ability of PEP in digesting all immunopathogenic sequences present in gluten.

  17. A rapid minor groove binder PCR method for distinguishing the vaccine strain Brucella abortus 104M.

    Science.gov (United States)

    Nan, Wenlong; Qin, Lide; Wang, Yong; Zhang, Yueyong; Tan, Pengfei; Chen, Yuqi; Mao, Kairong; Chen, Yiping

    2018-01-24

    Brucellosis is a widespread zoonotic disease caused by Gram-negative Brucella bacteria. Immunisation with attenuated vaccine is an effective method of prevention, but it can interfere with diagnosis. Live, attenuated Brucella abortus strain 104M has been used for the prevention of human brucellosis in China since 1965. However, at present, no fast and reliable method exists that can distinguish this strain from field strains. Single nucleotide polymorphism (SNP)-based assays offer a new approach for such discrimination. SNP-based minor groove binder (MGB) and Cycleave assays have been used for rapid identification of four Brucella vaccine strains (B. abortus strains S19, A19 and RB51, and B. melitensis Rev1). The main objective of this study was to develop a PCR assay for rapid and specific detection of strain 104M. We developed a SNP-based MGB PCR assay that could successfully distinguish strain 104M from 18 representative strains of Brucella (B. abortus biovars 1, 2, 3, 4, 5, 6, 7 and 9, B. melitensis biovars 1, 2 and 3, B. suis biovars 1, 2, 3 and 4, B. canis, B. neotomae, and B. ovis), four Brucella vaccine strains (A19, S19, S2, M5), and 55 Brucella clinical field strains. The assay gave a negative reaction with four non-Brucella species (Escherichia coli, Pasteurella multocida, Streptococcus suis and Pseudomonas aeruginosa). The minimum sensitivity of the assay, evaluated using 10-fold dilutions of chromosomal DNA, was 220 fg for the 104M strain and 76 fg for the single non-104M Brucella strain tested (B. abortus A19). The assay was also reproducible (intra- and inter-assay coefficients of variation = 0.006-0.022 and 0.012-0.044, respectively). A SNP-based MGB PCR assay was developed that could straightforwardly and unambiguously distinguish B. abortus vaccine strain 104M from non-104M Brucella strains. Compared to the classical isolation and identification approaches of bacteriology, this real-time PCR assay has substantial advantages in terms of

  18. Quantification of Organic Acids in Fermented Shrimp Waste by HPLC

    Directory of Open Access Journals (Sweden)

    Dalia Isabel Sánchez-Machado

    2008-01-01

    Full Text Available This work describes a simple, rapid, and reliable HPLC method for the determination of organic acids in fermented shrimp waste. Lactic, acetic and citric acids were quantified by HPLC with UV detection, on a 250×4.6 mm Extrasil ODS 5-μm column, mobile phase was ultrapure water adjusted with metaphosphoric acid to pH=2.1, flow rate 0.6 mL/min, column temperature 30 °C, and detection wavelength 210 nm. Under these conditions, the recovery (97.5 % and the method repeatability (RSD=6.2 % for lactic acid were of satisfying quality. Organic acids can preserve the quality and nutritive value of fermented shrimp waste.

  19. Novel spectrophotometric approach for determination of validamycin A in fermentation of Streptomyces hygroscopicus.

    Science.gov (United States)

    Li, Wei; Feng, Jinsong; Liu, Yan; Jiang, Jing; Zheng, Xiaodong; Zhou, Wen-Wen

    2016-12-01

    Validamycin A (Val-A), produced by Streptomyces hygroscopicus 5008 in industrial fermentation, is one of the most widely used anti-fungal agro-antibiotics in Asia and high performance liquid chromatography (HPLC) assay is usually used to determine the production of Val-A. A new approach to determine Val-A by spectrophotometer is developed. During the fermentation of S. hygroscopicus 5008, a pigment secretion was found along with the Val-A biosynthesis. There was a stable relationship between the concentration of Val-A and spectral absorption (SA) value of this pigment at 450 nm, even in different fermentation cultures or conditions. Using SA value as interior label, a rapid spectrophotometric method for determining Val-A production was established. In comparing Val-A productivity by HPLC method with that by SA method, the relative standard deviation (R.S.D.) was 0.007 (less than 0.05, no variation) and the conditional probability [Pr(T fermentation, which demonstrated SA method was as stable and accurate as standard HPLC method. It was applied successfully to finding positive strains with high Val-A productivity and short fermentation time. SA assay is an accurate and cost-effective method for measuring Val-A and screening high-producing strains, and this work provides a new insight for rapid quantitative analysis of antibiotics in fermentation of pigment-producing strains. Copyright © 2016 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  20. A Method for Rapid Measurement of Contrast Sensitivity on Mobile Touch-Screens

    Science.gov (United States)

    Mulligan, Jeffrey B.

    2016-01-01

    Touch-screen displays in cell phones and tablet computers are now pervasive, making them an attractive option for vision testing outside of the laboratory or clinic. Here we de- scribe a novel method in which subjects use a finger swipe to indicate the transition from visible to invisible on a grating which is swept in both contrast and frequency. Because a single image can be swiped in about a second, it is practical to use a series of images to zoom in on particular ranges of contrast or frequency, both to increase the accuracy of the measurements and to obtain an estimate of the reliability of the subject. Sensitivities to chromatic and spatio-temporal modulations are easily measured using the same method. A proto- type has been developed for Apple Computer's iPad/iPod/iPhone family of devices, implemented using an open-source scripting environment known as QuIP (QUick Image Processing, http://hsi.arc.nasa.gov/groups/scanpath/research.php). Preliminary data show good agreement with estimates obtained from traditional psychophysical methods as well as newer rapid estimation techniques. Issues relating to device calibration are also discussed.

  1. Modified agar dilution method for rapid antibiotic susceptibility testing of anaerobic bacteria.

    Science.gov (United States)

    Hanson, C W; Martin, W J

    1978-01-01

    A simplified method has been developed for agar dilution antimicrobial susceptibility testing of anaerobic bacteria, designed to economize on time and money when only a few isolates need to be tested. The procedure is based on the principle of using filter paper disks as carriers of the antibiotic and 35- by 10-mm petri dishes which, when inoculated with the Steers replicator, can test up to four organisms per plate. The procedure was run in parallel with conventional agar dilution techniques and showed 95% agreement to within one dilution for all minimal inhibitory concentrations recorded on fresh anaerobic isolates from clinical specimens. The technique was further simplified by using commercially available antibiotic-containing disks, thereby alleviating the tedious and time-consuming procedure of preparing the disks. The data indicated that 48- to 72-h diffusion periods were sufficient to achieve a uniform concentration of the antibiotic in the petri plate and that the antibiotics were stable at room temperature for that period of time. In terms of applicability and relevance to the needs of the clinical microbiology laboratory, the modified agar dilution method for rapid antimicrobial susceptibility testing of individual anaerobic isolates was found to be superior to the broth dilution method since it was easier to read and required considerably less set up time. PMID:400819

  2. Development of a rapid HRM genotyping method for detection of dog-derived Giardia lamblia.

    Science.gov (United States)

    Tan, Liping; Yu, Xingang; Abdullahi, Auwalu Yusuf; Wu, Sheng; Zheng, Guochao; Hu, Wei; Song, Meiran; Wang, Zhen; Jiang, Biao; Li, Guoqing

    2015-11-01

    Giardia lamblia is a zoonotic flagellate protozoan in the intestine of human and many mammals including dogs. To assess a threat of dog-derived G. lamblia to humans, the common dog-derived G. lamblia assemblages A, C, and D were genotyped by high-resolution melting (HRM) technology. According to β-giardin gene sequence, the qPCR-HRM primers BG5 and BG7 were designed. A series of experiments on the stability, sensitivity, and accuracy of the HRM method were also tested. Results showed that the primers BG5 and BG7 could distinguish among three assemblages A, C, and D, which Tm value differences were about 1 °C to each other. The melting curves of intra-assay reproducibility were almost coincided, and those of inter-assay reproducibility were much the same shape. The lowest detection concentration was about 5 × 10(-6)-ng/μL sample. The genotyping results from 21 G. lamblia samples by the HRM method were in complete accordance with sequencing results. It is concluded that the HRM genotyping method is rapid, stable, specific, highly sensitive, and suitable for clinical detection and molecular epidemiological survey of dog-derived G. lamblia.

  3. Rapid, high-temperature, field test method for evaluation of geothermal calcium carbonate scale inhibitors

    Energy Technology Data Exchange (ETDEWEB)

    Asperger, R.G.

    1986-09-01

    A new test method is described that allows the rapid field testing of calcium carbonate scale inhibitors at 500/sup 0/F (260/sup 0/C). The method evolved from use of a full-flow test loop on a well with a mass flow rate of about 1 x 10/sup 6/ lbm/hr (126 kg/s). It is a simple, effective way to evaluate the effectiveness of inhibitors under field conditions. Five commercial formulations were chosen for field evaluation on the basis of nonflowing, laboratory screening tests at 500/sup 0/F (260/sup 0/C). Four of these formulations from different suppliers controlled calcium carbonate scale deposition as measured by the test method. Two of these could dislodge recently deposited scale that had not age-hardened. Performance-profile diagrams, which were measured for these four effective inhibitors, show the concentration interrelationship between brine calcium and inhibitor concentrations at which the formulations will and will not stop scale formation in the test apparatus. With these diagrams, one formulation was chosen for testing on the full-flow brine line. The composition was tested for 6 weeks and showed a dramatic decrease in the scaling occurring at the flow-control valve. This scaling was about to force a shutdown of a major, long-term flow test being done for reservoir economic evaluations. The inhibitor stopped the scaling, and the test was performed without interruption.

  4. A simple and rapid cultural method for detection of Enterobacter sakazakii in environmental samples.

    Science.gov (United States)

    Guillaume-Gentil, O; Sonnard, V; Kandhai, M C; Marugg, J D; Joosten, H

    2005-01-01

    A method was developed to detect and identify Enterobacter sakazakii in environmental samples. The method is based on selective enrichment at 45+/-0.5 degrees C in lauryl sulfate tryptose broth supplemented with 0.5 M NaCl and 10 mg/liter vancomycin (mLST) for 22 to 24 h followed by streaking on tryptone soy agar with bile salts. When exposed to light during incubation at 37 degrees C, E. sakazakii produces yellow colonies within 24 h; identification was confirmed by testing for alpha-glucosidase activity and by using API 20E strips. All of the E. sakazakii strains tested (n = 99) were able to grow in mLST at 45+/-0.5 degrees C, whereas 35 of 39 strains of potential competitors, all belonging to the Enterobacteriaceae, were suppressed. A survey was carried out with 192 environmental samples from four different milk powder factories. Using this new protocol, E. sakazakii was isolated from almost 40% of the samples, whereas the reference procedure (enrichment in buffered peptone water, isolation on violet red bile glucose agar, and biochemical identification of randomly chosen colonies) only yielded 26% positive results. This selective method can be very useful for the rapid and reliable detection of E. sakazakii in environmental samples.

  5. Rapid, Simple, and Sensitive Spectrofluorimetric Method for the Estimation of Ganciclovir in Bulk and Pharmaceutical Formulations

    Directory of Open Access Journals (Sweden)

    Garima Balwani

    2013-01-01

    Full Text Available A new, simple, rapid, sensitive, accurate, and affordable spectrofluorimetric method was developed and validated for the estimation of ganciclovir in bulk as well as in marketed formulations. The method was based on measuring the native fluorescence of ganciclovir in 0.2 M hydrochloric acid buffer of pH 1.2 at 374 nm after excitation at 257 nm. The calibration graph was found to be rectilinear in the concentration range of 0.25–2.00 μg mL−1. The limit of quantification and limit of detection were found to be 0.029 μg mL−1 and 0.010 μg mL−1, respectively. The method was fully validated for various parameters according to ICH guidelines. The results demonstrated that the procedure is accurate, precise, and reproducible (relative standard deviation <2% and can be successfully applied for the determination of ganciclovir in its commercial capsules with average percentage recovery of 101.31 ± 0.90.

  6. Rapid Method for the Determination of the Stable Oxygen Isotope Ratio of Water in Alcoholic Beverages.

    Science.gov (United States)

    Wang, Daobing; Zhong, Qiding; Li, Guohui; Huang, Zhanbin

    2015-10-28

    This paper demonstrates the first successful application of an online pyrolysis technique for the direct determination of oxygen isotope ratios (δ(18)O) of water in alcoholic beverages. Similar water concentrations in each sample were achieved by adjustment with absolute ethyl alcohol, and then a fixed GC split ratio can be used. All of the organic ingredients were successfully separated from the analyte on a CP-PoraBond Q column and subsequently vented out, whereas water molecules were transferred into the reaction furnace and converted to CO. With the system presented, 15-30 μL of raw sample was diluted and can be analyzed repeatedly; the analytical precision was better than 0.4‰ (n = 5) in all cases, and more than 50 injections can be made per day. No apparent memory effect was observed even if water samples were injected using the same syringe; a strong correlation (R(2) = 0.9998) was found between the water δ(18)O of measured sample and that of working standards. There was no significant difference (p > 0.05) between the mean δ(18)O value and that obtained by the traditional method (CO2-water equilibration/isotope ratio mass spectrometry) and the newly developed method in this study. The advantages of this new method are its rapidity and straightforwardness, and less test portion is required.

  7. A rapid and efficient electroporation method for transformation of Halomonas sp. O-1.

    Science.gov (United States)

    Harris, Joshua R; Lundgren, Benjamin R; Grzeskowiak, Brian R; Mizuno, Kouhei; Nomura, Christopher T

    2016-10-01

    Halomonas sp. O-1 is a halophilic bacterium with a high potential for industrial application due to its natural ability to produce polyhydroxyalkanoates (PHAs) using seawater-based media. However, a major barrier preventing industrial scale implementation of this organism is a lack of molecular methodologies capable of readily transforming members of the Halomonas genus. Currently, the only reliable method used for introducing DNA into Halomonas spp. is bacterial conjugation, a somewhat tedious and time-consuming technique compared to electroporation-based methodologies. Here we describe a rapid and reproducible method for the electroporation of Halomonas sp. O-1 with plasmid DNA. Electrocompetent cells were generated by growing Halomonas sp. O-1 in a yeast extract-tryptone medium with a final salinity of 3.5%, pH of 7.5, followed by several washes using 300mM sucrose. Results show that plasmids containing chloramphenicol (Cm(R)) and gentamicin (Gm(R)) resistance cassettes are suitable antibiotic selection markers for transformation and yields of 10(4) transformants per μg of DNA were obtained. This method is simple to perform and the materials used are readily available in most research labs. Additionally, this plasmid-based transformation procedure has the potential to be adapted for a number of applications including the creation of recombinant stains and the generation of deletion mutants of Halomonas spp. Copyright © 2016 Elsevier B.V. All rights reserved.

  8. A Rapid and Sensitive Method to Measure the Functional Activity of Shiga Toxins in Human Serum

    Directory of Open Access Journals (Sweden)

    Valentina Arfilli

    2015-11-01

    Full Text Available Shiga toxins (Stx have a definite role in the development of hemolytic uremic syndrome in children with hemorrhagic colitis caused by pathogenic Stx-producing Escherichia coli (STEC strains. The dramatic effects of these toxins on the microvasculature of different organs, particularly of the kidney, are well known, whereas there is no consensus on the mechanism by which Stx reach the endothelia of target organs and/or indirectly injure these body sites. We hereby describe a quick (4 h, radioactive, Raji cell-based method designed for the detection of Stx in human sera. The assay monitors the translation impairment induced by these powerful inhibitors of protein synthesis, which are identified properly by neutralizing their activity with specific monoclonal antibodies. By this method, we detected for the first time the functional activity of Stx in sera of STEC-infected patients during hemorrhagic colitis. Recent research has pointed to a dynamic process of Stx-induced renal intoxication in which concurrent and interactive steps are involved. Our rapid and specific method could be useful for studying the kinetics of Stx during the natural course of STEC infection and the interplay between Stx activity in serum and Stx presence in different blood fractions (neutrophils, monocytes, platelets, leukocyte-platelet aggregates, microvesicles, lipoproteins.

  9. FLASH: A rapid method for prototyping paper-based microfluidic devices‡

    Science.gov (United States)

    Martinez, Andres W.; Phillips, Scott T.; Wiley, Benjamin J.; Gupta, Malancha

    2011-01-01

    This article describes FLASH (Fast Lithographic Activation of Sheets), a rapid method for laboratory prototyping of microfluidic devices in paper. Paper-based microfluidic devices are emerging as a new technology for applications in diagnostics for the developing world, where low cost and simplicity are essential. FLASH is based on photolithography, but requires only a UV lamp and a hotplate; no clean-room or special facilities are required (FLASH patterning can even be performed in sunlight if a UV lamp and hotplate are unavailable). The method provides channels in paper with dimensions as small as 200 μm in width and 70 μm in height; the height is defined by the thickness of the paper. Photomasks for patterning paper-based microfluidic devices can be printed using an ink-jet printer or photocopier, or drawn by hand using a waterproof black pen. FLASH provides a straightforward method for prototyping paper-based microfluidic devices in regions where the technological support for conventional photolithography is not available. PMID:19023478

  10. A simple electrochemical method for the rapid estimation of antioxidant potentials of some selected medicinal plants.

    Science.gov (United States)

    Amidi, Salimeh; Mojab, Faraz; Bayandori Moghaddam, Abdolmajid; Tabib, Kimia; Kobarfard, Farzad

    2012-01-01

    Clinical and Epidemiological studies have shown that a diet rich in fruits and vegetables is associated with a decreased risk of cardiovascular diseases, cancers and other related disorders. These beneficial health effects have been attributed in part to the presence of antioxidants in dietary plants. Therefore screening for antioxidant properties of plant extracts has been one of the interests of scientists in this field. Different screening methods have been reported for the evaluation of antioxidant properties of plant extracts in the literature. In the present research a rapid screening method has been introduced based on cyclic voltammetry for antioxidant screening of some selected medicinal plant extracts. CYCLIC VOLTAMMETRY OF METHANOLIC EXTRACTS OF SEVEN MEDICINAL PLANTS: Buxus hyrcana, Rumex crispus, Achillea millefolium, Zataria multiflora, Ginkgo biloba, Lippia citriodora and Heptaptera anisoptera was carried out at different scan rates. Based on the interpretation of voltammograms, Rumex crispus, Achillea millefolium and Ginkgo biloba showed higher antioxidant capability than the others while Lippia citriodora contained the highest amount of antioxidants. Cyclic voltammetry is expected to be a simple method for screening antioxidants and estimating the antioxidant activity of foods and medicinal plants.

  11. A Rapid and Sensitive Method to Measure the Functional Activity of Shiga Toxins in Human Serum

    Science.gov (United States)

    Arfilli, Valentina; Carnicelli, Domenica; Ardissino, Gianluigi; Torresani, Erminio; Scavia, Gaia; Brigotti, Maurizio

    2015-01-01

    Shiga toxins (Stx) have a definite role in the development of hemolytic uremic syndrome in children with hemorrhagic colitis caused by pathogenic Stx-producing Escherichia coli (STEC) strains. The dramatic effects of these toxins on the microvasculature of different organs, particularly of the kidney, are well known, whereas there is no consensus on the mechanism by which Stx reach the endothelia of target organs and/or indirectly injure these body sites. We hereby describe a quick (4 h), radioactive, Raji cell-based method designed for the detection of Stx in human sera. The assay monitors the translation impairment induced by these powerful inhibitors of protein synthesis, which are identified properly by neutralizing their activity with specific monoclonal antibodies. By this method, we detected for the first time the functional activity of Stx in sera of STEC-infected patients during hemorrhagic colitis. Recent research has pointed to a dynamic process of Stx-induced renal intoxication in which concurrent and interactive steps are involved. Our rapid and specific method could be useful for studying the kinetics of Stx during the natural course of STEC infection and the interplay between Stx activity in serum and Stx presence in different blood fractions (neutrophils, monocytes, platelets, leukocyte-platelet aggregates, microvesicles, lipoproteins). PMID:26556372

  12. Rapid and sensitive method for determination of withaferin-A in human plasma by HPLC.

    Science.gov (United States)

    Patial, Pankaj; Gota, Vikram

    2011-02-01

    To develop and validate a rapid and sensitive high-performance liquid chromatographic method for determination of withaferin-A in human plasma. Withaferin-A, the active molecule of a traditional Indian herb, has demonstrated several biological activities in preclinical models. A validated bioassay is not available for its pharmacokinetic evaluation. The chromatographic system used a reverse-phase C18 column with UV-visible detection at 225 nm. The mobile phase consisted of water and acetonitrile applied in a gradient flow. Withaferin-A was extracted by simple protein-precipitation technique. The calibration curve was linear in the concentration range of 0.05-1.6 µg/ml. The method has the desired sensitivity to detect the plasma concentration range of withaferin-A that is likely to show biological activity based on in vitro data. This is the first HPLC method ever described for the estimation of withaferin-A in human plasma which could be applied for pharmacokinetic studies.

  13. Validation of a user-friendly and rapid method for quantifying iodine content of salt.

    Science.gov (United States)

    Rohner, Fabian; Garrett, Greg S; Laillou, Arnaud; Frey, Simone K; Mothes, Ralf; Schweigert, Florian J; Locatelli-Rossi, Lorenzo

    2012-12-01

    Despite considerable progress made in the past decade through salt iodization programs, over 2 billion people worldwide still have inadequate iodine intake, with devastating consequences for brain development and intellectual capacity. To optimize these programs with regard to salt iodine content, careful monitoring of salt iodine content is essential, but few methods are available to quantitatively measure iodine concentration in a simple, fast, and safe way. We have validated a newly developed device that quantitatively measures the content of potassium iodate in salt in a simple, safe, and rapid way. The linearity, determination and detection limit, and inter- and intra-assay variability of this colorimetric method were assessed and the method was compared with iodometric titration, using salt samples from several countries. Linearity of analysis ranged from 5 to 75 mg/kg iodine, with 1 mg/kg being the determination limit; the intra- and interassay imprecision was 0.9%, 0.5%, and 0.7% and 1.5%, 1.7%, and 2.5% for salt samples with iodine contents of 17, 30, and 55 mg/kg, respectively; the interoperator imprecision for the same samples was 1.2%, 4.9%, and 4.7%, respectively. Comparison with the iodometric method showed high agreement between the methods (R2 = 0.978; limits of agreement, -10.5 to 10.0 mg/kg). The device offers a field- and user-friendly solution to quantifying potassium iodate salt content reliably. For countries that use potassium iodide in salt iodization programs, further validation is required.

  14. Validity and feasibility of a satellite imagery-based method for rapid estimation of displaced populations

    Directory of Open Access Journals (Sweden)

    Checchi Francesco

    2013-01-01

    Full Text Available Abstract Background Estimating the size of forcibly displaced populations is key to documenting their plight and allocating sufficient resources to their assistance, but is often not done, particularly during the acute phase of displacement, due to methodological challenges and inaccessibility. In this study, we explored the potential use of very high resolution satellite imagery to remotely estimate forcibly displaced populations. Methods Our method consisted of multiplying (i manual counts of assumed residential structures on a satellite image and (ii estimates of the mean number of people per structure (structure occupancy obtained from publicly available reports. We computed population estimates for 11 sites in Bangladesh, Chad, Democratic Republic of Congo, Ethiopia, Haiti, Kenya and Mozambique (six refugee camps, three internally displaced persons’ camps and two urban neighbourhoods with a mixture of residents and displaced ranging in population from 1,969 to 90,547, and compared these to “gold standard” reference population figures from census or other robust methods. Results Structure counts by independent analysts were reasonably consistent. Between one and 11 occupancy reports were available per site and most of these reported people per household rather than per structure. The imagery-based method had a precision relative to reference population figures of Conclusions In settings with clearly distinguishable individual structures, the remote, imagery-based method had reasonable accuracy for the purposes of rapid estimation, was simple and quick to implement, and would likely perform better in more current application. However, it may have insurmountable limitations in settings featuring connected buildings or shelters, a complex pattern of roofs and multi-level buildings. Based on these results, we discuss possible ways forward for the method’s development.

  15. A method for rapid measurement of intrarenal and other tissue pressures.

    Science.gov (United States)

    SWANN, H G; MONTGOMERY, A V; DAVIS, J C; MICKLE, E R

    1950-12-01

    A rapid method for measuring tissue pressures has been designed. A pressure of 250 mm. Hg is imposed on a manometer. Then the system is allowed to discharge into a needle cannula inserted in the tissue. The manometer forces out fluid (about 10 c.mm.) until the pressure within it is the same as that within the tissue. Records of the pressure changes are made. Each observation takes about a minute. The method gives results that are closely comparable with other reports of tissue pressures. With this method, the pressure in the following organs of dogs was found to be: kidney, 26 mm. Hg, cerebral cortex, 0 to 5 mm., muscle, 1 to 10 mm., spleen, S to 16 mm., subcutaneous tissue, 0 to 3 mm., and liver -2 to 14 mm. The reliability of the method was tested on the kidneys of decerebrate dogs. Measurements were found to be the same within narrow limits over a period of an hour; they were the same when taken simultaneously in different regions of the same kidney or in opposite kidneys. They were independent of the volume of fluid forced into the tissue. Similar pressures were observed with 1 or 5 or 10 holes bored in the shaft of the cannulating needle. The intrarenal pressure was also measured by inserting a needle cannula into the tissue and then allowing the pressure to reach equilibrium passively with a manometer. This method gave similar results. The intrarenal pressure has now found to be the same when measured by three different technics.

  16. Improved Savitzky-Golay-method-based fluorescence subtraction algorithm for rapid recovery of Raman spectra.

    Science.gov (United States)

    Chen, Kun; Zhang, Hongyuan; Wei, Haoyun; Li, Yan

    2014-08-20

    In this paper, we propose an improved subtraction algorithm for rapid recovery of Raman spectra that can substantially reduce the computation time. This algorithm is based on an improved Savitzky-Golay (SG) iterative smoothing method, which involves two key novel approaches: (a) the use of the Gauss-Seidel method and (b) the introduction of a relaxation factor into the iterative procedure. By applying a novel successive relaxation (SG-SR) iterative method to the relaxation factor, additional improvement in the convergence speed over the standard Savitzky-Golay procedure is realized. The proposed improved algorithm (the RIA-SG-SR algorithm), which uses SG-SR-based iteration instead of Savitzky-Golay iteration, has been optimized and validated with a mathematically simulated Raman spectrum, as well as experimentally measured Raman spectra from non-biological and biological samples. The method results in a significant reduction in computing cost while yielding consistent rejection of fluorescence and noise for spectra with low signal-to-fluorescence ratios and varied baselines. In the simulation, RIA-SG-SR achieved 1 order of magnitude improvement in iteration number and 2 orders of magnitude improvement in computation time compared with the range-independent background-subtraction algorithm (RIA). Furthermore the computation time of the experimentally measured raw Raman spectrum processing from skin tissue decreased from 6.72 to 0.094 s. In general, the processing of the SG-SR method can be conducted within dozens of milliseconds, which can provide a real-time procedure in practical situations.

  17. Identification of Different Bile Species and Fermentation Time of Bile Arisaema Based on An Intelligent Electronic Nose and Least Squares Support Vector Machine.

    Science.gov (United States)

    Tan, Chaoqun; Xie, Dashuai; Liu, Yujie; Wu, Chun-Jie; Wen, Chuanbiao; Huang, Xiwei; Guo, Jinhong

    2018-02-03

    Fermentation is one of the most traditionally utilized methods to process the raw materials of traditional Chinese medicine (TCM). Bile Arisaema (BA) is produced by the fermentation of the roots of Arisaema heterophyllu with bile. Fermentation time and bile species are the key factors in producing BA. The study was aimed to develop a new and rapid method for the identification of different fermentation time and bile species of BA. The polysaccharide content (PC), protease activity (PA) and amylase activity (AC) of BA were determined. The changes of PC, PA and AC were significant indicators for the evaluation of different fermentation time. Based on the odor data of BA obtained by electronic nose technology (E-nose), the Principal Component Analysis (PCA) was used to identify bile species. The results were further verified by the Least Squares Support Vector Machine (LS-SVM). The trained LS-SVM was also used to predict the PC, PA and AC of the samples to identify fermentation time. The present study indicated that E-nose combined with LS-SVM could effectively predict the PC, PA and AC of the samples, identify the bile species and fermentation time of BA, and it was proved to be a useful strategy for quality control of fermented products of TCMs.

  18. A Rapid Method for Quantifying Viable Mycobacterium avium subsp. paratuberculosis in Cellular Infection Assays

    Science.gov (United States)

    Pooley, Hannah B.; de Silva, Kumudika; Purdie, Auriol C.; Begg, Douglas J.; Whittington, Richard J.

    2016-01-01

    ABSTRACT Determining the viability of bacteria is a key outcome of in vitro cellular infection assays. Currently, this is done by culture, which is problematic for fastidious slow-growing bacteria such as Mycobacterium avium subsp. paratuberculosis, where it can take up to 4 months to confirm growth. This study aimed to identify an assay that can rapidly quantify the number of viable M. avium subsp. paratuberculosis cells in a cellular sample. Three commercially available bacterial viability assays along with a modified liquid culture method coupled with high-throughput quantitative PCR growth detection were assessed. Criteria for assessment included the ability of each assay to differentiate live and dead M. avium subsp. paratuberculosis organisms and their accuracy at low bacterial concentrations. Using the culture-based method, M. avium subsp. paratuberculosis growth was reliably detected and quantified within 2 weeks. There was a strong linear association between the 2-week growth rate and the initial inoculum concentration. The number of viable M. avium subsp. paratuberculosis cells in an unknown sample was quantified based on the growth rate, by using growth standards. In contrast, none of the commercially available viability assays were suitable for use with samples from in vitro cellular infection assays. IMPORTANCE Rapid quantification of the viability of Mycobacterium avium subsp. paratuberculosis in samples from in vitro cellular infection assays is important, as it allows these assays to be carried out on a large scale. In vitro cellular infection assays can function as a preliminary screening tool, for vaccine development or antimicrobial screening, and also to extend findings derived from experimental animal trials. Currently, by using culture, it takes up to 4 months to obtain quantifiable results regarding M. avium subsp. paratuberculosis viability after an in vitro infection assay; however, with the quantitative PCR and liquid culture method

  19. Monitoring of alcoholic fermentation using near infrared and mid infrared spectroscopies combined with electronic nose and electronic tongue

    Energy Technology Data Exchange (ETDEWEB)

    Buratti, S., E-mail: susanna.buratti@unimi.it [Department of Food Science and Technology, Universita degli Studi di Milano, Via Celoria 2, 20133 Milano (Italy); Ballabio, D. [Department of Environmental Sciences, University of Milano-Bicocca, Piazza della Scienza 1, 20126 Milano (Italy); Giovanelli, G. [Department of Food Science and Technology, Universita degli Studi di Milano, Via Celoria 2, 20133 Milano (Italy); Dominguez, C.M. Zuluanga [Instituto de Ciencia y Tecnologia de Alimentos, Universidad Nacional de Colombia, Ciudad Universitaria, Bogota (Colombia); Moles, A.; Benedetti, S.; Sinelli, N. [Department of Food Science and Technology, Universita degli Studi di Milano, Via Celoria 2, 20133 Milano (Italy)

    2011-07-04

    Graphical abstract: Application of non destructive methods for the monitoring of red wine fermentation in correlation with the evolution of chemical parameters. Highlights: > We monitored time-related changes in red wine fermentation process. > NIR and MIR spectroscopies, electronic nose and tongue were applied. > Data were kinetically modelled to identify critical points during fermentation. > NIR, MIR electronic nose and tongue were able to follow the fermentation process. > The models agreed with the evolution of chemical parameters. - Abstract: Effective fermentation monitoring is a growing need due to the rapid pace of change in the wine industry, which calls for fast methods providing real time information in order to assure the quality of the final product. The objective of this work is to investigate the potential of non-destructive techniques associated with chemometric data analysis, to monitor time-related changes that occur during red wine fermentation. Eight micro-fermentation trials conducted in the Valtellina region (Northern Italy) during the 2009 vintage, were monitored by a FT-NIR and a FT-IR spectrometer and by an electronic nose and tongue. The spectroscopic technique was used to investigate molecular changes, while electronic nose and electronic tongue evaluated the evolution of the aroma and taste profile during the must-wine fermentation. Must-wine samples were also analysed by traditional chemical methods in order to determine sugars (glucose and fructose) consumption and alcohol (ethanol and glycerol) production. Principal Component Analysis was applied to spectral, electronic nose and electronic tongue data, as an exploratory tool, to uncover molecular, aroma and taste modifications during the fermentation process. Furthermore, the chemical data and the PC1 scores from spectral, electronic nose and electronic tongue data were modelled as a function of time to identify critical points during fermentation. The results showed that NIR and MIR

  20. Cleaning Validation of Fermentation Tanks

    DEFF Research Database (Denmark)

    Salo, Satu; Friis, Alan; Wirtanen, Gun

    2008-01-01

    Reliable test methods for checking cleanliness are needed to evaluate and validate the cleaning process of fermentation tanks. Pilot scale tanks were used to test the applicability of various methods for this purpose. The methods found to be suitable for validation of the clenlinees were visula...

  1. Influence of indigenous yeasts on the fermentation and volatile profile of plum brandies.

    Science.gov (United States)

    Satora, Paweł; Tuszyński, Tadeusz

    2010-05-01

    The aim of this study was to determine the influence of different yeasts isolated from fresh blue plum fruits (Aureobasidium sp.) and spontaneously fermenting plum musts (Kloeckera apiculata and Saccharomyces cerevisiae), as well as commercial wine and distillery strains, on the fermentation and chemical composition of plum brandies. Gas chromatography methods were used to detect major volatile components. The most rapid fermentation occurred in musts inoculated with S. cerevisiae. However, the highest concentration of ethanol was detected in samples after spontaneous fermentation (8.40% v/v). Plum brandies obtained after distillation contained from 66.3 (K. apiculata) up to 74.3% v/v ethanol (spontaneous fermentation). The samples after spontaneous fermentation were distinguished by a high content of acetoin, ethyl acetate and total esters, accompanied by a low level of methanol and fusel alcohols. Non-Saccharomyces yeasts were responsible for higher concentrations of esters and methanol, while S. cerevisiae strains resulted in increased levels of higher alcohols. It was also found that isolated indigenous strains of S. cerevisiae synthesized relatively low amounts of higher alcohols compared to commercial cultures. Samples obtained using the distillery strain of S. cerevisiae received the highest score (18.2) during sensory analysis and were characterized by a well-harmonised taste and aroma. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

  2. A validated stability-indicating HPLC with photodiode array detector (PDA) method for the stress tests of Monascus purpureus-fermented rice, red yeast rice.

    Science.gov (United States)

    Li, Yong-Guo; Liu, Hong; Wang, Zheng-Tao

    2005-09-01

    A stability-indicating reversed phase high-performance liquid chromatography (RP-HPLC) with photodiode array (PDA) detection method was developed and validated for the assay of monacolin series compounds including monacolin K, L, J and their hydroxyl acid forms as well as dehydroxymonacolin K simultaneously in Monascus purpureus-fermented rice, red yeast rice. Well-resolved peaks of seven main compounds of monacolin family were profiled on a C(18) reverse-phase column using a linear gradient of 0.1% trifluoroacetic acid and acetonitrile as the mobile phase, and the detection wavelength was set at 237nm. The method was validated with respect to specificity, chromatographic parameters, linearity, precision, accuracy, limits of detection and quantitation. The stability stress testing for fermented red yeast rice powder was carried out to show the effects of high temperature (80 degrees C), high humidity at room temperature (92.5% RH, 25 degrees C), high humidity at high temperature (75% RH, 60 degrees C) and light (sunlight) in solid state. The results exhibited that monacolins decreased significantly under the conditions of high humidity at high temperature (75% RH, 60 degrees C) and sunlight. Monacolin K and its hydroxyl acid form would be dehydrolyzed and turned to dehydromonacolin K at high temperature (80 degrees C) while the monacolin K, J and L would be transformed into their corresponding hydroxyl acid forms under the condition of high humidity (92.5% RH, 25 degrees C). The indication is that monacolins in red yeast rice powder are light-sensitive and thermal-sensitive. Therefore, it has been suggested that the preparations containing monacolins be stored in the place of cool and lightproof. The proposed degradation pathways were discussed as well. The multi-components assay for stability of botanical products could provide much more information than the normal marker-orientation method.

  3. A Simple and Rapid Identification Method for Mycobacterium bovis BCG with Loop-Mediated Isothermal Amplification.

    Directory of Open Access Journals (Sweden)

    Yuji Kouzaki

    Full Text Available Bacillus Calmette-Guérin (BCG is widely used as a live attenuated vaccine against Mycobacterium tuberculosis and is an agent for standard prophylaxis against the recurrence of bladder cancer. Unfortunately, it can cause severe infectious diseases, especially in immunocompromised patients, and the ability to immediately distinguish BCG from other M. tuberculosis complexes is therefore important. In this study, we developed a simple and easy-to-perform identification procedure using loop-mediated amplification (LAMP to detect deletions within the region of difference, which is deleted specifically in all M. bovis BCG strains. Reactions were performed at 64 °C for 30 min and successful targeted gene amplifications were detected by real-time turbidity using a turbidimeter and visual inspection of color change. The assay had an equivalent detection limit of 1.0 pg of genomic DNA using a turbidimeter whereas it was 10 pg with visual inspection, and it showed specificity against 49 strains of 44 pathogens, including M. tuberculosis complex. The expected LAMP products were confirmed through identical melting curves in real-time LAMP procedures. We employed the Procedure for Ultra Rapid Extraction (PURE kit to isolate mycobacterial DNA and found that the highest sensitivity limit with a minimum total cell count of mycobacterium (including DNA purification with PURE was up to 1 × 10(3 cells/reaction, based on color changes under natural light with FDA reagents. The detection limit of this procedure when applied to artificial serum, urine, cerebrospinal fluid, and bronchoalveolar lavage fluid samples was also about 1 × 10(3 cells/reaction. Therefore, this substitute method using conventional culture or clinical specimens followed by LAMP combined with PURE could be a powerful tool to enable the rapid identification of M. bovis BCG as point-of-care testing. It is suitable for practical use not only in resource-limited situations, but also in any

  4. Development of a fluorescence in situ hybridization (FISH) method for rapid detection of Ulva prolifera

    Science.gov (United States)

    Zhang, Qing-Chun; Liu, Qing; Kang, Zhen-Jun; Yu, Ren-Cheng; Yan, Tian; Zhou, Ming-Jiang

    2015-09-01

    Large-scale green tides have occurred consecutively since 2007 in the Yellow Sea (YS), China. The dominant causative species of the green tides has been identified as Ulva prolifera. The origin of green tides in the YS has been traced back to the Subei Shoal based on the results of remote-sensing, numerical simulations and field investigations. However, it is difficult to study the early development of green tides in the Subei Shoal because of the mixture of multiple green algae and the morphological diversity of U. prolifera when under variable environmental conditions. In this study, a rapid and accurate fluorescence in situ hybridization (FISH) method was developed to detect U. prolifera from the community of green algae targeting the 5S rDNA spacer region of U. prolifera. Two specific probes, 5S-1 and 5S-2, were designed based on the sequences of the 5S rDNA spacer regions of U. prolifera, Ulva linza and Ulva flexuosa. Specificity of the FISH method was tested using the six species of green algae commonly occurring in the Subei Shoal, including U. prolifera, U. linza, U. flexuosa, Ulva compressa, Ulva pertusa and Blidingia sp. The results showed that only U. prolifera could be labeled with both probes. Probe 5S-1, which showed a much higher labeling efficiency on U. prolifera, was ultimately selected as the probe for the FISH detection. The sample preparation method was optimized, particularly for the mature green algae, by the addition of cellulase and proteinase K in the pre-hybridization solution. Labeling efficiency with the probe 5S-1 reached 96% on average under the optimized conditions. The successful development of the FISH method has been applied to qualitative and quantitative analysis of field samples collected from the YS, and the results indicate a potential use in future green algae studies.

  5. A rapid method for the sequential separation of polonium, plutonium, americium and uranium in drinking water.

    Science.gov (United States)

    Lemons, B; Khaing, H; Ward, A; Thakur, P

    2018-02-06

    A new sequential separation method for the determination of polonium and actinides (Pu, Am and U) in drinking water samples has been developed that can be used for emergency response or routine water analyses. For the first time, the application of TEVA chromatography column in the sequential separation of polonium and plutonium has been studied. This method utilizes a rapid Fe +3 co-precipitation step to remove matrix interferences, followed by plutonium oxidation state adjustment to Pu 4+ and an incubation period of ~ 1 h at 50-60 °C to allow Po 2+ to oxidize to Po 4+ . The polonium and plutonium were then separated on a TEVA column, while separation of americium from uranium was performed on a TRU column. After separation, polonium was micro-precipitated with copper sulfide (CuS), while actinides were micro co-precipitated using neodymium fluoride (NdF 3 ) for counting by the alpha spectrometry. The method is simple, robust and can be performed quickly with excellent removal of interferences, high chemical recovery and very good alpha peak resolution. The efficiency and reliability of the procedures were tested by using spiked samples. The effect of several transition metals (Cu 2+ , Pb 2+ , Fe 3+ , Fe 2+ , and Ni 2+ ) on the performance of this method were also assessed to evaluate the potential matrix effects. Studies indicate that presence of up to 25 mg of these cations in the samples had no adverse effect on the recovery or the resolution of polonium alpha peaks. Copyright © 2018 Elsevier Ltd. All rights reserved.

  6. Veterinary drug residues in meat: Concerns and rapid methods for detection.

    Science.gov (United States)

    Reig, Milagro; Toldrá, Fidel

    2008-01-01

    The use of substances having hormonal or thyreostatic action as well as β-agonists is banned in the European Union. However, sometimes forbidden drugs may be added to feeds for illegal administration to farm animals for promoting increased muscle development or increased water retention and thus obtain an economical benefit. The result is a fraudulent overweight of meat but, what is worse, residues of these substances may remain in meat and may pose a real threat to the consumer either through exposure to the residues, transfer of antibiotic resistance or allergy risk. This has exerted a great concern among European consumers. The control of the absence of these forbidden substances in animal foods and feeds is regulated in the European Union by Directive96/23/EC on measures to monitor certain substances and residues in live animals and animal products. Analytical methodology, including criteria for identification and confirmation, for the monitoring of compliance was also given in Decisions 93/256/EEC and 93/257/EEC. More recently, Decision 2002/657/EC provided rules for the analytical methods to be used in testing of official samples. A crucial step is the screening of veterinary drug residues in live animals, feeds and animal products in view of the remarkable number of samples and large variety of residues to be analysed. In recent years, different rapid methods having easy performance, high sensitivity and high throughput have been proposed and are being extensively used. These methods as well as other new methods are reviewed in this manuscript.

  7. TranScreen-N: Method for rapid screening of trans-ungual drug delivery enhancers.

    Science.gov (United States)

    Murthy, S Narasimha; Vaka, Siva Ram Kiran; Sammeta, Srinivasa Murthy; Nair, Anroop B

    2009-11-01

    Topical monotherapy of nail diseases such as onychomycosis and nail psoriasis has been less successful due to poor permeability of the human nail plate to topically administered drugs. Chemical enhancers are utilized to improve the drug delivery across the nail plate. Choosing the most effective chemical enhancers for the given drug and formulation is highly critical in determining the efficacy of topical therapy of nail diseases. Screening the large pool of enhancers using currently followed diffusion cell experiments would be tedious and expensive. The main objective of this study is to develop TranScreen-N, a high throughput method of screening trans-ungual drug permeation enhancers. It is a rapid microwell plate based method which involves two different treatment procedures; the simultaneous exposure treatment and the sequential exposure treatment. In the present study, several chemicals were evaluated by TranScreen-N and by diffusion studies in the Franz diffusion cell (FDC). Good agreement of in vitro drug delivery data with TranScreen-N data provided validity to the screening technique. In TranScreen-N technique, the enhancers can be grouped according to whether they need to be applied before or simultaneously with drugs (or by either procedures) to enhance the drug delivery across the nail plate. TranScreen-N technique can significantly reduce the cost and duration required to screen trans-ungual drug delivery enhancers. (c) 2009 Wiley-Liss, Inc. and the American Pharmacists Association

  8. A rapid method to authenticate vegetable oils through surface-enhanced Raman scattering

    Science.gov (United States)

    Lv, Ming Yang; Zhang, Xin; Ren, Hai Rui; Liu, Luo; Zhao, Yong Mei; Wang, Zheng; Wu, Zheng Long; Liu, Li Min; Xu, Hai Jun

    2016-03-01

    Vegetable oils are essential in our daily diet. Among various vegetable oils, the major difference lies in the composition of fatty acids, including unsaturated fatty acids (USFA) and saturated fatty acids (SFA). USFA include oleic acid (OA), linoleic acid (LA), and α-linolenic acid (ALA), while SFA are mainly palmitic acid (PA). In this study, the most typical and abundant USFA present with PA in vegetable oils were quantified. More importantly, certain proportional relationships between the integrated intensities of peaks centered at 1656 cm-1 (S1656) in the surface-enhanced Raman scattering spectra of different USFA were confirmed. Therefore, the LA or ALA content could be converted into an equivalent virtual OA content enabling the characterization of the USFA content in vegetable oils using the equivalent total OA content. In combination with the S1656 of pure OA and using peanut, sesame, and soybean oils as examples, the ranges of S1656 corresponding to the National Standards of China were established to allow the rapid authentication of vegetable oils. Gas chromatograph-mass spectrometer analyses verified the accuracy of the method, with relative errors of less than 5%. Moreover, this method can be extended to other detection fields, such as diseases.

  9. New multiplex PCR methods for rapid screening of genetically modified organisms in foods.

    Science.gov (United States)

    Datukishvili, Nelly; Kutateladze, Tamara; Gabriadze, Inga; Bitskinashvili, Kakha; Vishnepolsky, Boris

    2015-01-01

    We present novel multiplex PCR methods for rapid and reliable screening of genetically modified organisms (GMOs). New designed PCR primers targeting four frequently used GMO specific sequences permitted identification of new DNA markers, in particular 141 bp fragment of cauliflower mosaic virus (CaMV) 35S promoter, 224 bp fragment of Agrobacterium tumefaciens nopaline synthase (NOS) terminator, 256 bp fragment of 5-enolppyruvylshikimate-phosphate synthase (epsps) gene and 258 bp fragment of Cry1Ab delta-endotoxin (cry1Ab) gene for GMO screening. The certified reference materials containing Roundup Ready soybean (RRS) and maize MON 810 were applied for the development and optimization of uniplex and multiplex PCR systems. Evaluation of amplification products by agarose gel electrophoresis using negative and positive controls confirmed high specificity and sensitivity at 0.1% GMO for both RRS and MON 810. The fourplex PCR was developed and optimized that allows simultaneous detection of three common transgenic elements, such as: CaMV 35S promoter, NOS terminator, epsps gene together with soybean-specific lectin gene. The triplex PCR developed enables simultaneous identification of transgenic elements, such as: 35S promoter and cry1Ab gene together with maize zein gene. The analysis of different processed foods demonstrated that multiplex PCR methods developed in this study are useful for accurate and fast screening of GM food products.

  10. A simple and rapid method for optical visualization and quantification of bacteria on textiles

    Science.gov (United States)

    Stiefel, Philipp; Schneider, Jana; Amberg, Caroline; Maniura-Weber, Katharina; Ren, Qun

    2016-01-01

    To prevent bacterial contamination on textiles and the associated undesired effects different biocidal coatings have been investigated and applied. However, due to health and environmental concerns anti-adhesive coatings preventing the binding of bacteria would be favored. To develop such anti-adhesive coatings simple assays for reliable and fast screening are beneficial. Here an easy-to-handle, robust and rapid assay to assess bacteria on textiles utilizing a tetrazolium salt was reported. The assay allowed direct eye visualization of the color change of the textiles containing bacteria, facilitating fast screening. Quantification of the adhered bacteria could be done by generating standard curves which correlate the staining intensity to cell numbers. An additional advantage of the described assay is that with the same detection method anti-adhesive and biocidal effects can be investigated. The method was applied to different coatings, using Pseudomonas aeruginosa and Staphylococcus aureus as model organisms. The detection limit was found to be between 2.5 * 106 and 9.4 * 108 for P. aeruginosa and between 1 * 106 and 3.3 * 108 for S. aureus. The anti-adhesive coating PLUMA was demonstrated to reduce bacterial adhesion without killing them, whereas the biocidal coating TH22-27 caused a clear reduction in the number of viable cells. PMID:28004762

  11. The rapid interphase chromosome assay (RICA implementation: comparison with other PCC methods

    Directory of Open Access Journals (Sweden)

    Sommer Sylwester

    2015-12-01

    Full Text Available A report is presented on the advantages of the rapid interphase chromosome assay (RICA and the difficulties that may be met while implementing this method for application in biological dosimetry. The RICA test can be applied on unstimulated human lymphocytes; this is an advantage in comparison with the dicentric chromosomes or micronucleus tests. In the former two tests, stimulated lymphocytes are examined and hence, 48 h more are needed to obtain cells traversing the cell cycle. Due to the use of unstimulated nondividing cells, higher numbers of cells are available for RICA analysis than for dicentric chromosomes or micronuclei tests. Moreover, the method can be applied after exposure to ionizing radiation doses in excess of 5 Gy. Such doses cause a significant cell cycle delay or result in the loss of G2 phase and mitotic cells because of apoptosis. Therefore, the traditional biodosimetry based on the evaluation of the incidence of damage to chromosomes is very difficult to carry out. This is due to the lack of an adequate number of mitotic cells for analysis. RICA is free of this disadvantage. An automatic microscope can be used to retrieve cell images; automatic image analysis can also be used.

  12. Development of a Rapid and Simple Method to Remove Polyphenols from Plant Extracts

    Directory of Open Access Journals (Sweden)

    Imali Ranatunge

    2017-01-01

    Full Text Available Polyphenols are secondary metabolites of plants, which are responsible for prevention of many diseases. Polyvinylpolypyrrolidone (PVPP has a high affinity towards polyphenols. This method involves the use of PVPP column to remove polyphenols under centrifugal force. Standards of gallic acid, epigallocatechin gallate, vanillin, and tea extracts (Camellia sinensis were used in this study. PVPP powder was packed in a syringe with different quantities. The test samples were layered over the PVPP column and subjected to centrifugation. Supernatant was tested for the total phenol content. The presence of phenolic compounds and caffeine was screened by HPLC and measuring the absorbance at 280. The antioxidant capacity of standards and tea extracts was compared with the polyphenol removed fractions using DPPH scavenging assay. No polyphenols were found in polyphenolic standards or tea extracts after PVPP treatment. The method described in the present study to remove polyphenols is simple, inexpensive, rapid, and efficient and can be employed to investigate the contribution of polyphenols present in natural products to their biological activity.

  13. A Rapid and Low-Cost Nonlithographic Method to Fabricate Biomedical Microdevices for Blood Flow Analysis

    Directory of Open Access Journals (Sweden)

    Elmano Pinto

    2014-12-01

    Full Text Available Microfluidic devices are electrical/mechanical systems that offer the ability to work with minimal sample volumes, short reactions times, and have the possibility to perform massive parallel operations. An important application of microfluidics is blood rheology in microdevices, which has played a key role in recent developments of lab-on-chip devices for blood sampling and analysis. The most popular and traditional method to fabricate these types of devices is the polydimethylsiloxane (PDMS soft lithography technique, which requires molds, usually produced by photolithography. Although the research results are extremely encouraging, the high costs and time involved in the production of molds by photolithography is currently slowing down the development cycle of these types of devices. Here we present a simple, rapid, and low-cost nonlithographic technique to create microfluidic systems for biomedical applications. The results demonstrate the ability of the proposed method to perform cell free layer (CFL measurements and the formation of microbubbles in continuous blood flow.

  14. A rapid and sensitive spectrophotometric method for the determination of benzoyl peroxide in wheat flour samples

    Directory of Open Access Journals (Sweden)

    Kraingkrai Ponhong

    2015-12-01

    Full Text Available A simple, rapid, and sensitive spectrophotometric method for the determination of benzoyl peroxide (BPO in wheat flour samples was developed. The detection principle is based on BPO reacted with 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid (ABTS to obtain a blue-green colored product that was detected at 415 nm by spectrophotometry. The effect of factors influencing the color reaction was investigated. Under the selected conditions, the linear range for quantification of BPO was observed between 0.2–1.0 mg L−1 with r2 = 0.998. The limit of detection (LOD was 0.025 mg L−1. The developed method obtained superior precision (relative standard deviation < 2% using 11 repeatability at 0.2 mg L−1, 0.6 mg L−1, and 0.8 mg L−1. The proposed methodology was successfully applied to determine BPO in wheat flour samples.

  15. New multiplex PCR methods for rapid screening of genetically modified organisms in foods

    Directory of Open Access Journals (Sweden)

    Nelly eDatukishvili

    2015-07-01

    Full Text Available We present novel multiplex PCR methods for rapid and reliable screening of genetically modified organisms (GMOs. New designed PCR primers targeting four frequently used GMO specific sequences permitted identification of new DNA markers, in particular 141 bp fragment of cauliflower mosaic virus (CaMV 35S promoter, 224 bp fragment of Agrobacterium tumefaciens nopaline synthase (NOS terminator, 256 bp fragment of 5-enolppyruvylshikimate-phosphate synthase (epsps gene and 258 bp fragment of Cry1Ab delta-endotoxin (cry1Ab gene for GMO screening. The certified reference materials containing Roundup Ready soybean (RRS and maize MON 810 were applied for the development and optimization of uniplex and multiplex PCR systems. Evaluation of amplification products by agarose gel electrophoresis using negative and positive controls confirmed high specificity and sensitivity at 0.1% GMO for both RRS and MON 810. The fourplex PCR was developed and optimized that allows simultaneous detection of three common transgenic elements, such as: CaMV 35S promoter, NOS terminator, epsps gene together with soybean-specific lectin gene. The triplex PCR developed enables simultaneous identification of transgenic elements, such as: 35S promoter and cry1Ab gene together with maize zein gene. The analysis of different processed foods demonstrated that multiplex PCR methods developed in this study are useful for accurate and fast screening of GM food products.

  16. Regional distribution of methionine adenosyltransferase in rat brain as measured by a rapid radiochemical method

    Energy Technology Data Exchange (ETDEWEB)

    Hiemke, C.; Ghraf, R.

    1981-09-01

    The distribution of methionine adenosyltransferase (MAT) in the CNS of the rat was studied by use of a rapid, sensitive and specific radiochemical method. The S-adenosyl-(methyl-/sup 14/C)L-methionine ((/sup 14/C)SAM) generated by adenosyl transfer from ATP to (methyl-/sup 14/C)L-methionine is quantitated by use of a SAM-consuming transmethylation reaction. Catechol O-methyltransferase (COMT), prepared from rat liver, transfers the methyl-/sup 14/C group of SAM to 3,4-dihydroxybenzoic acid. The /sup 14/C-labelled methylation products, vanillic acid and isovanillic acid, are separated from unreacted methionine by solvent extraction and quantitated by liquid scintillation counting. Compared to other methods of MAT determination, which include separation of generated SAM from methionine by ion-exchange chromatography, the assay described exhibited the same high degree of specificity and sensitivity but proved to be less time consuming. MAT activity was found to be uniformly distributed between various brain regions and the pituitary gland of adult male rats. In the pineal gland the enzyme activity is about tenfold higher.

  17. Anaerobic fermentation of agricultural residue: potential for improvement and implementation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Jewell, W. J.; Capener, H. R.; Dell& #x27; orto, S.

    1978-02-01

    The results of studies designed to evaluate the potential of rapidly improving the technology of anaerobic fermentation of agricultural residues and methods of implementing it in existing agricultural operations are reported. The main objectives of this study were to: identify simple and low cost anaerobic fermentor design criteria that would be appropriate in small agricultural operations, develop high rate fermentor concepts that would enable multiple product recovery from the reactor, expand the information base particularly in the area of temperature influence on the process, and to review sociological and economic issues relating to implementation of fermentation technology. This study has identified several major anaerobic fermentation concepts which illustrate that the technology may be rapidly improved. A simple reactor design utilizing an unmixed plug flow concept was shown to be comparable to the more complex completely mixed reactor when using dairy cow residue. A high rate thermophilic reactor designed to encourage flotation of particulate solids illustrated that liquid, solid, and gaseous products can be generated within the anaerobic fermentor thus eliminating an additional dewatering unit process. A third reactor concept involved extension of the anaerobic attached microbial film expanded bed to the treatment of cow manure slurries. A high rate of methane generation was recorded. Comprehensive thermophilic fermentation studies (60/sup 0/C) indicated that the increased temperature resulted in little improvement in total quantity or the rate of yield of gas over that obtained with mesophilic fermentation with reactor retention periods greater than 10 days. Finally, other areas where preliminary date were obtained are noted.

  18. Method and apparatus using selected superparamagnetic labels for rapid quantification of immunochromatographic tests

    Directory of Open Access Journals (Sweden)

    Mika PA Laitinen

    2009-04-01

    Full Text Available Mika PA Laitinen1, Jari Salmela2, Leona Gilbert1, Risto Kaivola1, Topi Tikkala2, Christian Oker-Blom1, Jukka Pekola3, Matti Vuento11Department of Biological and Environmental Science; 2Department of Physics, University of Jyväskylä, Jyväskylä, Finland; 3Low Temperature Laboratory, Helsinki University of Technology, Helsinki, FinlandAbstract: A rapid method and instrumentation for quantification of immunochromatographic tests (ICT are described. The principle and performance of the method was demonstrated by measuring the levels of human chorionic gonadotropin (hCG present in urine. The test format was a sandwich assay using two distinct monoclonal antibodies directed against hCG. The first anti-hCG antibody was labeled with superparamagnetic particles whereas the second was immobilized as a narrow detection zone on a porous membrane. The human urine sample was mixed with superparamagnetic particles coated with the first anti-hCG antibody, and the mixture was allowed to migrate past the detection zone containing the second anti-hCG antibody. Capillary forces facilitated migration of the immune complexes along the porous membrane. The amount of superparamagnetic particle-labelled monoclonal anti-hCG bound to the detection zone was directly proportional to the amount of hCG present in the sample as detected by measuring magnetization in the detector coil. The method had a practical detection limit of 20 U/l (54 nM of hCG per 5 μl of human urine and a linear range of three decades from 20 U/l to 10 000 U/l. In addition, the analysis was completed within less than 10 minutes. Thus, the test format should be suitable for fast detection and monitoring of a large variety of clinically important parameters and analytes.Keywords: affinity, biosensor, hCG, immunochromatography, magnetization, superparamagnetic

  19. Rapid methods to assess sanitizing efficacy of benzalkonium chloride to Listeria monocytogenes biofilms.

    Science.gov (United States)

    Romanova, Nadya A; Gawande, Purushottam V; Brovko, Lubov Y; Griffiths, Mansel W

    2007-12-01

    Different methods were used to investigate biofilm growth including crystal violet staining, ATP bioluminescence and total viable count. Seven strains of Listeria monocytogenes and 8 of their derivative strains were screened for their capacity to form biofilms. Both adaptation to benzalkonium chloride (BC) and curing of plasmids did not significantly affect biofilm-forming ability. The strains of L. monocytogenes belonging to serotype 1 formed biofilms significantly better as compared to serotype 4 (P=0.0003). To estimate the efficacy of BC for biofilm elimination the best and the poorest biofilm-formers were used (C719 and LJH 381). It was observed that, L. monocytogenes strain C719 in biofilms is at least 1000 times more resistant to BC than in planktonic form. Cells present in biofilms were shown to recover and grow after BC treatment thus providing a source of recontamination. It was shown that ATP bioluminescence provides good correlation with bacterial counts of L. monocytogenes in biofilms. Staining with crystal violet, on the contrary, did not correlate with bacterial growth in biofilms in the presence of high concentrations of BC but provided information on the concentration of bacterial cells, both live and dead, attached to the surface. ATP bioluminescence was found to be a reliable method for rapid estimation of the efficacy of sanitizers for biofilm disinfection. Crystal violet staining, on the other hand, was shown to be a suitable method to monitor removal of biofilms. Our investigation showed that for Listeria biofilms concentrations of BC higher then 10 mg/ml should be applied for at least 30 min to kill almost all the live cells in biofilms. However, this concentration was still not enough to remove biofilms from the surface of plastic.

  20. Development of a rapid, one-step screening method for the isolation of presumptive proteolytic enterococci.

    Science.gov (United States)

    Graham, Ken; Rea, Rosemary; Simpson, Paul; Stack, Helena

    2017-01-01

    Enterococci show higher proteolytic activities than other lactic acid bacteria and thus have received considerable attention in scientific literature in recent years. Proteolytic enzymes of enterococci have warranted the use of some species as starter, adjuncts or protective cultures and as probiotics, while in some strains they have also been linked with virulence. Consequently, the isolation and identification of proteolytic enterococci is becoming of increasing interest and importance. However, current screening methods for proteolytic enterococci can be time consuming, requiring a two-step procedure which may take up to 96h. This study describes a method, utilising Kanamycin Skim Milk Aesculin Azide (KSMEA) agar, for the isolation of proteolytic enterococci in one-step, thereby significantly reducing screening time. KSMEA combines the selective properties of Kanamycin Aesculin Azide Agar (KAA) with skim milk powder for the detection of proteolytic enterococci. Enterococci produced colonies with a black halo on KSMEA which were accompanied by a zone of clearing in the media when enterococci were proteolytic. KSMEA medium retained the selectivity of KAA, while proteolytic enterococci were easily distinguished from non-proteolytic enterococci when two known strains were propagated on KSMEA. KSMEA also proved effective at isolating and detecting enterococci in raw milk, faeces and soil. Isolates recovered from the screen were confirmed as enterococci using genus-specific primers. Proteolytic enterococci were present in the raw milk sample only and were easily distinguishable from non-proteolytic enterococci and other microorganisms. Therefore, KSMEA provides a rapid, one-step screening method for the isolation of presumptive proteolytic enterococci. Copyright © 2016 Elsevier B.V. All rights reserved.

  1. Use of Plackett-Burman design for rapid screening of nitrogen and carbon sources for the production of lipase in solid state fermentation by Yarrowia lipolytica from mustard oil cake (Brassica napus).

    Science.gov (United States)

    Imandi, Sarat Babu; Karanam, Sita Kumari; Garapati, Hanumantha Rao

    2013-01-01

    Mustard oil cake (Brassica napus), the residue obtained after extraction of mustard oil from mustard oil seeds, was investigated for the production of lipase under solid state fermentation (SSF) using the marine yeast Yarrowia lipolytica NCIM 3589. Process parameters such as incubation time, biomass concentration, initial moisture content, carbon source concentration and nitrogen source concentration of the medium were optimized. Screening of ten nitrogen and five carbon sources has been accomplished with the help of Plackett-Burman design. The highest lipase activity of 57.89 units per gram of dry fermented substrate (U/gds) was observed with the substrate of mustard oil cake in four days of fermentation.

  2. Cellulolytic Enzymes Production via Solid-State Fermentation: Effect of Pretreatment Methods on Physicochemical Characteristics of Substrate

    Directory of Open Access Journals (Sweden)

    Khushal Brijwani

    2011-01-01

    Full Text Available We investigated the effect of pretreatment on the physicochemical characteristics—crystallinity, bed porosity, and volumetric specific surface of soybean hulls and production of cellulolytic enzymes in solid-state fermentation of Trichoderma reesei and Aspergillus oryzae cultures. Mild acid and alkali and steam pretreatments significantly increased crystallinity and bed porosity without significant change inholocellulosic composition of substrate. Crystalline and porous steam-pretreated soybean hulls inoculated with T. reesei culture had 4 filter paper units (FPU/g-ds, 0.6 IU/g-ds β-glucosidase, and 45 IU/g-ds endocellulase, whereas untreated hulls had 0.75 FPU/g-ds, 0.06 IU/g-ds β-glucosidase, and 7.29 IU/g-ds endocellulase enzyme activities. In A. oryzae steam-pretreated soybean hulls had 47.10 IU/g-ds endocellulase compared to 30.82 IU/g-ds in untreated soybean hulls. Generalized linear statistical model fitted to enzyme activity data showed that effects of physicochemical characteristics on enzymes production were both culture and enzyme specific. The paper shows a correlation between substrate physicochemical properties and enzyme production.

  3. Production of antioxidant compounds of grape seed skin by fermentation and its optimization using response surface method

    Science.gov (United States)

    Andayani, D. G. S.; Risdian, C.; Saraswati, V.; Primadona, I.; Mawarda, P. C.

    2017-03-01

    Skins and seeds of grape are waste generated from food industry. These wastes contain nutrients of which able to be utilized as an important source for antioxidant metabolite production. Through an environmentally friendly process, natural antioxidant material was produced. This study aimed to generate antioxidant compounds by liquid fermentation. Optimization was carried out by using Schizosaccharomyces cerevisiae in Katu leaf substrate. Optimization variables through response surface methodology (RSM) were of sucrose concentration, skins and seeds of grape concentration, and pH. Results showed that the optimum conditions for antioxidant production were of 5 g/L sucrose, 5 g/L skins and seed at pH 5, respectively. The resulted antioxidant activity was of 1.62 mg/mL. Mathematical model of variance analysis using a second order polynomial corresponding to the resulted data for the antioxidant was of 20.70124 - 3.86997 A - 0.65996 B - 1.88367 C + 0.19634 A2 - 0.016638 B2 + 0.28848 C2 + 0.26980 AB - 0.068333 AC - 0.12367 BC. From the gained equation, the optimum yield from all variables was significant. Chemical analysis of the antioxidant was carried out using 2,2-Diphenyl-1-picrylhydrazyl (DPPH).

  4. Improvements in fast-neutron spectroscopy methods (1961); Amelioration des methodes de spectrometrie des neutrons rapides (1961)

    Energy Technology Data Exchange (ETDEWEB)

    Cambou, F. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1961-02-15

    This research aimed at improving fast-neutron electronic detectors based on n-p elastic scattering. The first part concerns proportional counters; careful constructional methods have made it possible to plot mono-energetic neutron spectra in the range 700 keV - 3 MeV with a resolution of 7 per cent. The second part concerns scintillation counters: an organic scintillator and an inorganic scintillator covered with a thin layer of a scattering agent. An exact study of the types of scintillation has made it possible to develop efficient discriminator circuits. Different neutron spectra plotted in the presence of a strong gamma background are presented. The last part deals with the development of form discrimination methods for the study, in the actual beam, of the elastic scattering of 14.58 MeV electrons. With hydrogen, the distribution f ({phi}) of the recoil protons is f({phi}) = 1 + 0.034 cos {phi} + 0.042 cos{sup 2} {phi}. With tritium the scattering is strongly anisotropic; the curve representing the variation of the differential cross-section for the elastic scattering in the centre of mass system is obtained with a target containing 1 cm{sup 3} of tritium. (author) [French] Le travail a porte sur l'amelioration des detecteurs electroniques de neutrons rapides bases sur la diffusion elastique n-p. La premiere partie est relative aux compteurs proportionnels; des methodes soignees de fabrication ont permis des traces de spectres de neutrons monoenergetiques dans le domaine 700 keV - 3 MeV avec une resolution de 7 pour cent. La deuxieme partie est relative au compteur a scintillations; scintillateur organique et scintillateur mineral recouvert d'un diffuseur mince. Une etude precise des formes de scintillations a permis la mise au point de circuits discriminateurs efficaces. Differents spectres de neutrons traces en presence d'un fond gamma intense sont presentes. La derniere partie est relative a la mise en oeuvre des methodes de discrimination de

  5. Development of a rapid method for the quantitative determination of deoxynivalenol using Quenchbody

    Energy Technology Data Exchange (ETDEWEB)

    Yoshinari, Tomoya [Division of Microbiology, National Institute of Health Sciences, 1-18-1, Kamiyoga, Setagaya-ku, Tokyo 158-8501 (Japan); Ohashi, Hiroyuki; Abe, Ryoji; Kaigome, Rena [Biomedical Division, Ushio Inc., 1-12 Minamiwatarida-cho, Kawasaki-ku, Kawasaki 210-0855 (Japan); Ohkawa, Hideo [Research Center for Environmental Genomics, Kobe University, 1-1 Rokkodai, Nada, Kobe 657-8501 (Japan); Sugita-Konishi, Yoshiko, E-mail: y-konishi@azabu-u.ac.jp [Department of Food and Life Science, Azabu University, 1-17-71 Fuchinobe, Chuo-ku, Sagamihara, Kanagawa 252-5201 (Japan)

    2015-08-12

    Quenchbody (Q-body) is a novel fluorescent biosensor based on the antigen-dependent removal of a quenching effect on a fluorophore attached to antibody domains. In order to develop a method using Q-body for the quantitative determination of deoxynivalenol (DON), a trichothecene mycotoxin produced by some Fusarium species, anti-DON Q-body was synthesized from the sequence information of a monoclonal antibody specific to DON. When the purified anti-DON Q-body was mixed with DON, a dose-dependent increase in the fluorescence intensity was observed and the detection range was between 0.0003 and 3 mg L{sup −1}. The coefficients of variation were 7.9% at 0.003 mg L{sup −1}, 5.0% at 0.03 mg L{sup −1} and 13.7% at 0.3 mg L{sup −1}, respectively. The limit of detection was 0.006 mg L{sup −1} for DON in wheat. The Q-body showed an antigen-dependent fluorescence enhancement even in the presence of wheat extracts. To validate the analytical method using Q-body, a spike-and-recovery experiment was performed using four spiked wheat samples. The recoveries were in the range of 94.9–100.2%. The concentrations of DON in twenty-one naturally contaminated wheat samples were quantitated by the Q-body method, LC-MS/MS and an immunochromatographic assay kit. The LC-MS/MS analysis showed that the levels of DON contamination in the samples were between 0.001 and 2.68 mg kg{sup −1}. The concentrations of DON quantitated by LC-MS/MS were more strongly correlated with those using the Q-body method (R{sup 2} = 0.9760) than the immunochromatographic assay kit (R{sup 2} = 0.8824). These data indicate that the Q-body system for the determination of DON in wheat samples was successfully developed and Q-body is expected to have a range of applications in the field of food safety. - Highlights: • A rapid method for quantitation of DON using Q-body has been developed. • A recovery test using the anti-DON Q-body was performed. • The concentrations of DON in wheat

  6. A rapid method for detection of five known mutations associated with aminoglycoside-induced deafness

    Directory of Open Access Journals (Sweden)

    Greinwald John H

    2009-01-01

    Full Text Available Abstract Background South Africa has one of the highest incidences of multidrug-resistant tuberculosis (MDR-TB in the world. Concomitantly, aminoglycosides are commonly used in this country as a treatment against MDR-TB. To date, at least five mutations are known to confer susceptibility to aminoglycoside-induced hearing loss. The aim of the present study was to develop a rapid screening method to determine whether these mutations are present in the South African population. Methods A multiplex method using the SNaPshot technique was used to screen for five mutations in the MT-RNR1 gene: A1555G, C1494T, T1095C, 961delT+C(n and A827G. A total of 204 South African control samples, comprising 98 Mixed ancestry and 106 Black individuals were screened for the presence of the five mutations. Results A robust, cost-effective method was developed that detected the presence of all five sequence variants simultaneously. In this pilot study, the A1555G mutation was identified at a frequency of 0.9% in the Black control samples. The 961delT+C(n variant was present in 6.6% of the Black controls and 2% of the Mixed ancestry controls. The T1095C, C1494T and A827G variants were not identified in any of the study participants. Conclusion The frequency of 0.9% for the A1555G mutation in the Black population in South Africa is of concern given the high incidence of MDR-TB in this particular ethnic group. Future larger studies are warranted to determine the true frequencies of the aminoglycoside deafness mutations in the general South African population. The high frequencies of the 961delT+C(n variant observed in the controls suggest that this change is a common non-pathogenic polymorphism. This genetic method facilitates the identification of individuals at high risk of developing hearing loss prior to the start of aminoglycoside therapy. This is important in a low-resource country like South Africa where, despite their adverse side-effects, aminoglycosides will

  7. A Rapid and Simple TLC-Densitometric Method for Assay of Clobetasol Propionate in Topical Solution.

    Science.gov (United States)

    Dolowy, Malgorzata; Kozik, Violetta; Bak, Andrzej; Jampilek, Josef; Barbusinski, Krzysztof; Thomas, Maciej; Pyka-Pajak, Alina

    2017-11-03

    A rapid, simple to use and low-cost thin-layer chromatographic procedure in normal phase system with densitometric detection at 246 nm was carefully validated according to the International Conference on Harmonisation (ICH) guidelines for assay of clobetasol propionate in topical solution containing clobetasol propionate in quantity 0.50 mg/mL. The adopted thin-layer chromatographic (TLC)-densitometric procedure could effectively separate clobetasol propionate from its related compound, namely clobetasol. It is linear for clobetasol propionate in the range of 0.188 ÷ 5 µg/spot. The limit of detection (LOD) and limit of quantification (LOQ) value is 0.061 and 0.186 µg/spot, respectively. Accuracy of proposed procedure was evaluated by recovery test. The mean recovery of studied clobetasol propionate ranges from 98.7 to 101.0%. The coefficient of variation (CV, %) obtained during intra-day and inter-day studies, which was less than 2% (0.40 ÷ 1.17%), confirms the precision of described method. The assay value of clobetasol propionate is consistent with the pharmacopoeial requirements. In conclusion, it can be suitable as a simple and economic procedure for routine quality control laboratories of clobetasol propionate in topical solution.

  8. Hydrodynamic Voltammetry as a Rapid and Simple Method for Evaluating Soil Enzyme Activities

    Directory of Open Access Journals (Sweden)

    Kazuto Sazawa

    2015-03-01

    Full Text Available Soil enzymes play essential roles in catalyzing reactions necessary for nutrient cycling in the biosphere. They are also sensitive indicators of ecosystem stress, therefore their evaluation is very important in assessing soil health and quality. The standard soil enzyme assay method based on spectroscopic detection is a complicated operation that requires the removal of soil particles. The purpose of this study was to develop a new soil enzyme assay based on hydrodynamic electrochemical detection using a rotating disk electrode in a microliter droplet. The activities of enzymes were determined by measuring the electrochemical oxidation of p-aminophenol (PAP, following the enzymatic conversion of substrate-conjugated PAP. The calibration curves of β-galactosidase (β-gal, β-glucosidase (β-glu and acid phosphatase (AcP showed good linear correlation after being spiked in soils using chronoamperometry. We also performed electrochemical detection using real soils. Hydrodynamic chronoamperometry can be used to assess the AcP in soils, with a detection time of only 90 s. Linear sweep voltammetry was used to measure the amount of PAP released from β-gal and β-glu by enzymatic reaction after 60 min. For the assessment of soil enzymes, the results of hydrodynamic voltammetry assay compared favorably to those using a standard assay procedure, but this new procedure is more user-friendly, rapid and simple.

  9. An assessment of various blood collection and transfer methods used for malaria rapid diagnostic tests

    Directory of Open Access Journals (Sweden)

    Baik Fred

    2007-11-01

    Full Text Available Abstract Background Four blood collection and transfer devices commonly used for malaria rapid diagnostic tests (RDTs were assessed for their consistency, accuracy and ease of use in the hands of laboratory technicians and village health workers. Methods Laboratory technicians and village health workers collected blood from a finger prick using each device in random order, and deposited the blood either on filter paper or into a suitable casette-type RDT. Consistency and accuracy of volume delivered was determined by comparing the measurements of the resulting blood spots/heights with the measurements of laboratory-prepared pipetted standard volumes. The effect of varying blood volumes on RDT sensitivity and ease of use was also observed. Results There was high variability in blood volume collected by the devices, with the straw and the loop, the most preferred devices, usually transferring volumes greater than intended, while the glass capillary tube and the plastic pipette transferring less volume than intended or none at all. Varying the blood volume delivered to RDTs indicated that this variation is critical to RDT sensitivity only when the transferred volume is very low. Conclusion None of the blood transfer devices assessed performed consistently well. Adequate training on their use is clearly necessary, with more development efforts for improved designs to be used by remote health workers, in mind.

  10. Rapid characterization of transgenic and non-transgenic soybean oils by chemometric methods using NIR spectroscopy

    Science.gov (United States)

    Luna, Aderval S.; da Silva, Arnaldo P.; Pinho, Jéssica S. A.; Ferré, Joan; Boqué, Ricard

    Near infrared (NIR) spectroscopy and multivariate classification were applied to discriminate soybean oil samples into non-transgenic and transgenic. Principal Component Analysis (PCA) was applied to extract relevant features from the spectral data and to remove the anomalous samples. The best results were obtained when with Support Vectors Machine-Discriminant Analysis (SVM-DA) and Partial Least Squares-Discriminant Analysis (PLS-DA) after mean centering plus multiplicative scatter correction. For SVM-DA the percentage of successful classification was 100% for the training group and 100% and 90% in validation group for non transgenic and transgenic soybean oil samples respectively. For PLS-DA the percentage of successful classification was 95% and 100% in training group for non transgenic and transgenic soybean oil samples respectively and 100% and 80% in validation group for non transgenic and transgenic respectively. The results demonstrate that NIR spectroscopy can provide a rapid, nondestructive and reliable method to distinguish non-transgenic and transgenic soybean oils.

  11. New 16-plex PCR method for rapid detection of diarrheagenic Escherichia coli directly from stool samples.

    Science.gov (United States)

    Antikainen, J; Tarkka, E; Haukka, K; Siitonen, A; Vaara, M; Kirveskari, J

    2009-08-01

    A rapid 16-plex polymerase chain reaction (PCR) suitable for routine diagnostics of diarrheagenic Escherichia coli (EHEC, EIEC, EAEC, ETEC, and EPEC) was developed, validated with control strains, and tested with 250 diarrhoeal stool samples. The specificity was 100% when tested with 289 control bacterial strains, and the analytical sensitivity of automated DNA extraction directly from stool samples was made by boiling the bacterial culture (10(4)-10(5) colony forming units/ml). The assay design starting directly from extraction of stool DNA allowed same day analysis without compromising sensitivity and specificity, which makes it superior compared to PCR after culturing the bacteria. The 16-plex PCR method demonstrated high prevalence of diarrheagenic E. coli in stool samples of patients returning from abroad (39.0%) in contrast to the patients with no travel history (8.7%; p < 0.001). The high prevalence of diarrheagenic E. coli suggests that their screening should be part of normal diarrhoea diagnostics, at least in the leading diagnostic laboratories.

  12. A Simple and Rapid Method for Preparing a Cell-Free Bacterial Lysate for Protein Synthesis.

    Directory of Open Access Journals (Sweden)

    Nitzan Krinsky

    Full Text Available Cell-free protein synthesis (CFPS systems are important laboratory tools that are used for various synthetic biology applications. Here, we present a simple and inexpensive laboratory-scale method for preparing a CFPS system from E. coli. The procedure uses basic lab equipment, a minimal set of reagents, and requires less than one hour to process the bacterial cell mass into a functional S30-T7 extract. BL21(DE3 and MRE600 E. coli strains were used to prepare the S30-T7 extract. The CFPS system was used to produce a set of fluorescent and therapeutic proteins of different molecular weights (up to 66 kDa. This system was able to produce 40-150 μg-protein/ml, with variations depending on the plasmid type, expressed protein and E. coli strain. Interestingly, the BL21-based CFPS exhibited stability and increased activity at 40 and 45°C. To the best of our knowledge, this is the most rapid and affordable lab-scale protocol for preparing a cell-free protein synthesis system, with high thermal stability and efficacy in producing therapeutic proteins.

  13. HPLC method for rapidly following biodiesel fuel transesterification reaction progress using a core-shell column

    Energy Technology Data Exchange (ETDEWEB)

    Allen, Samuel J.; Ott, Lisa S. [California State University, Chico, CA (United States)

    2012-07-15

    There are a wide and growing variety of feedstocks for biodiesel fuel. Most commonly, these feedstocks contain triglycerides which are transesterified into the fatty acid alkyl esters (FAAEs) which comprise biodiesel fuel. While the tranesterification reaction itself is simple, monitoring the reaction progress and reaction products is not. Gas chromatography-mass spectrometry is useful for assessing the FAAE products, but does not directly address either the tri-, di-, or monoglycerides present from incomplete transesterification or the free fatty acids which may also be present. Analysis of the biodiesel reaction mixture is complicated by the solubility and physical property differences among the components of the tranesterification reaction mixture. In this contribution, we present a simple, rapid HPLC method which allows for monitoring all of the main components in a biodiesel fuel transesterification reaction, with specific emphasis on the ability to monitor the reaction as a function of time. The utilization of a relatively new, core-shell stationary phase for the HPLC column allows for efficient separation of peaks with short elution times, saving both time and solvent. (orig.)

  14. Lock-in thermography as a rapid and reproducible thermal characterization method for magnetic nanoparticles

    Science.gov (United States)

    Lemal, Philipp; Geers, Christoph; Monnier, Christophe A.; Crippa, Federica; Daum, Leopold; Urban, Dominic A.; Rothen-Rutishauser, Barbara; Bonmarin, Mathias; Petri-Fink, Alke; Moore, Thomas L.

    2017-04-01

    Lock-in thermography (LIT) is a sensitive imaging technique generally used in engineering and materials science (e.g. detecting defects in composite materials). However, it has recently been expanded for investigating the heating power of nanomaterials, such as superparamagnetic iron oxide nanoparticles (SPIONs). Here we implement LIT as a rapid and reproducible method that can evaluate the heating potential of various sizes of SPIONs under an alternating magnetic field (AMF), as well as the limits of detection for each particle size. SPIONs were synthesized via thermal decomposition and stabilized in water via a ligand transfer process. Thermographic measurements of SPIONs were made by stimulating particles of varying sizes and increasing concentrations under an AMF. Furthermore, a commercially available SPION sample was included as an external reference. While the size dependent heating efficiency of SPIONs has been previously described, our objective was to probe the sensitivity limits of LIT. For certain size regimes it was possible to detect signals at concentrations as low as 0.1 mg Fe/mL. Measuring at different concentrations enabled a linear regression analysis and extrapolation of the limit of detection for different size nanoparticles.

  15. A method for the rapid detection and identification of halo blight pathogen on common bean

    Directory of Open Access Journals (Sweden)

    Popović Tatjana

    2014-01-01

    Full Text Available A diagnostic method based on nested-PCR, followed by ELISA and conventional bacteriology tests, for the rapid and reliable detection of halo blight pathogen Pseudomonas savastanoi pv. phaseolicola (Psp collected from infected bean leaves and seeds is described. Psp formed white, small and flat colonies on nutrient agar medium, creamy white, flat and circular on Milk-Tween agar medium and light yellow, convex and shiny on modified sucrose peptone agar medium. Eighteen Gram-negative, catalase-positive and oxidase-negative strains were subjected to nested PCR with primers P 5.1/P 3.1 and P 5.2/P 3.2, which directed the amplification of the 450 bp target DNA fragment in all tested strains. According to the results of DAS- and PTA-ELISA with respect to reactivity to specific antibodies, all analyzed strains belonged to Psp bacterium. Pathogenicity was tested on bean pods and cotyledon leaves, on which greasy spots were formed. Psp did not cause hypersensitive reaction on the leaves of tobacco and geranium. Strains produced levan, fluorescent pigment, oxidative metabolism of glucose, did not reduce nitrate, did not produce indole and H2S, did not hydrolyze starch, gelatin and esculin; they produced acid from glucose, mannose, sucrose and glycerol, and did not produce acid from maltose, starch, esculin, dulcite, sorbitol, inositol and erythritol.

  16. Composition, Acceptability and Efficacy of Fermented and ...

    African Journals Online (AJOL)

    Objective: The main objective was to evaluate the efficacy of fermented and unfermented cereal-based-Oral Rehydration Solution (CB-ORS) for home management of diarrhoea in children. Materials and Methods: Local varieties of white maize (Zea mays) and rice (Oritz sativa) fermented (48h) and unfermented were ...

  17. Physiochemical Properties and Antinutrient Content of Fermented ...

    African Journals Online (AJOL)

    Popcorn and groundnut composite flours were fermented using pure strains of Rhizopus nigricans and Saccharomyces cerevisiae by solid substrate fermentation method. There was decrease in pH with increase in total titrable acidity in all the samples. The result of the proximate analysis revealed that there was an ...

  18. Fermentation: From Sensory Experience to Conceptual Understanding

    Science.gov (United States)

    Moore, Eugene B.

    1977-01-01

    Presented is a laboratory exercise that utilizes the natural yeast carbonation method of making homemade root beer to study fermentation and the effect of variables upon the fermentation process. There are photographs, a sample data sheet, and procedural hints included. (Author/MA)

  19. Rapid validated HPTLC method for estimation of betulinic acid in Nelumbo nucifera (Nymphaeaceae) rhizome extract.

    Science.gov (United States)

    Mukherjee, Debajyoti; Kumar, N Satheesh; Khatua, Taraknath; Mukherjee, Pulok K

    2010-01-01

    Betulinic acid (pentacyclic triterpenoid) is an important marker component present in Nelumbo nucifera Gaertn. rhizome. N. nucifera rhizome has several medicinal uses including hypoglycaemic, antidiarrhoeal, antimicrobial, diuretic, antipyretic, psychopharmacological activities. To establish a simple, sensitive, reliable, rapid and validated high-performance thin-layer chromatography method for estimation of betulinic acid in hydro-alcoholic extract of N. nucifera Gaertn. rhizome. The separation was carried out on a thin-layer chromatography aluminium plate pre-coated with silica gel 60F(254) , eluted with chloroform, methanol and formic acid (49 : 1 : 1 v/v). Post chromatographic derivatisation was done with anisaldehyde-sulphuric acid reagent and densitometric scanning was performed using a Camag TLC scanner III, at 420 nm. The system was found to produce a compact spot for betulinic acid (R(f) = 0.30). A good linear precision relationship between the concentrations (2-10 µg) and peak areas were obtained with the correlation coefficient (r) of 0.99698. The limit of detection and limit of quantification of betulinic acid were detected to be 0.4 and 2.30 µg per spot. The percentage of recovery was found to be 98.36%. The percentage relative standard deviations of intra-day and inter-day precisions were 0.82-0.394 and 0.85-0.341, respectively. This validated HPTLC method provides a new and powerful approach to estimate betulinic acid as phytomarker in the extract. Copyright © 2010 John Wiley & Sons, Ltd.

  20. A rapid method for assessing the environmental performance of commercial farms in the Pampas of Argentina.

    Science.gov (United States)

    Viglizzo, E F; Frank, F; Bernardos, J; Buschiazzo, D E; Cabo, S

    2006-06-01

    The generation of reliable updated information is critical to support the harmonization of socio-economic and environmental issues in a context of sustainable development. The agro-environmental assessment and management of agricultural systems often relies on indicators that are necessary to make sound decisions. This work aims to provide an approach to (a) assess the environmental performance of commercial farms in the Pampas of Argentina, and (b) propose a methodological framework to calculate environmental indicators that can rapidly be applied to practical farming. 120 commercial farms scattered across the Pampas were analyzed in this study during 2002 and 2003. Eleven basic indicators were identified and calculation methods described. Such indicators were fossil energy (FE) use, FE use efficiency, nitrogen (N) balance, phosphorus (P) balance, N contamination risk, P contamination risk, pesticide contamination risk, soil erosion risk, habitat intervention, changes in soil carbon stock, and balance of greenhouse gases. A model named Agro-Eco-Index was developed on a Microsoft-Excel support to incorporate on-farm collected data and facilitate the calculation of indicators by users. Different procedures were applied to validate the model and present the results to the users. Regression models (based on linear and non-linear models) were used to validate the comparative performance of the study farms across the Pampas. An environmental dashboard was provided to represent in a graphical way the behavior of farms. The method provides a tool to discriminate environmentally friendly farms from those that do not pay enough attention to environmental issues. Our procedure might be useful for implementing an ecological certification system to reward a good environmental behavior in society (e.g., through tax benefits) and generate a commercial advantage (e.g., through the allocation of green labels) for committed farmers.

  1. A novel method for rapidly isolating microbes that suppress soil-borne phytopathogens

    Science.gov (United States)

    Cooper, Sarah; Agnew, Linda; Pereg, Lily

    2016-04-01

    Seedling establishment faces a large number of challenges related to soil physical properties as well as to fungal root diseases. It is extremely difficult to eliminate fungal pathogens from soils where their populations are established due to the persistent nature of their spores and since fumigation of resident fungi is very ineffective in clay-containing soils. Therefore it is necessary to find ways to overcome disease in areas where the soils are infected with fungal phytopathogens. The phenomenon of disease suppressive soils, where the pathogen is present but no disease observed, suggests that microbial antagonism in the soil may lead to the suppression of the growth of fungal pathogens. There are also cases in the literature where soil microorganisms were isolated that suppress the growth of phytopathogens. Antibiosis is one of the most important mechanisms responsible for fungal antagonism, with some significant antifungal compounds involved including antibiotics, volatile organic compounds, hydrogen cyanide and lytic enzymes. Isolation of pathogen-suppressive microorganisms from the soil is time consuming and tedious. We established a simple method for direct isolation of soil microbes (bacteria and fungi) that suppress fungal phytopathogens as well as procedures for confirmation of disease suppression. We will discuss such methods, which were so far tested with the cotton fungal pathogens Thielaviopsis basicola, Verticillium dahliae and Fusarium oxysporum and Verticillium fungicola. We have isolated a diversity of T. basicola-suppressive fungi and bacteria from two vastly different soil types. Identification of the antagonistic isolates revealed that they are a diverse lot, some belong to groups known to be suppressive of a wide range of fungal pathogens, endorsing the power of this technique to rapidly and directly isolate soil-borne microbes antagonistic to a wide variety of fungal pathogens.

  2. A simple and rapid flow cytometric method for detection of porcine cell surface markers.

    Science.gov (United States)

    Stabel, T J; Bolin, S R; Pesch, B A; Rahner, T E

    2000-11-01

    The objective of this study was to develop a rapid and reliable method for flow cytometric analysis of porcine whole blood cells. Fifty-microliters of heparin- or EDTA-treated whole blood was added to wells of a round-bottom 96-well microtitration plate. Each well contained 10 microl of an appropriate dilution of four different antibodies (40 microl total; two primary monoclonal antibodies and two fluorescent-labeled secondary antibodies). For convenience, the antibody mixture could be added to plates 1-2 days prior to assay and stored at 4 degrees C. Once whole blood was added to wells, plates were mixed gently, placed in a sealed bag and incubated in the dark at room temperature for 20 min. Contents of wells were then transferred to polystyrene tubes containing 2 ml of 1.5% formalin in distilled water and mixed gently. Cells were fixed for a minimum of 30 min and then stored in the dark at 4 degrees C until analysis by flow cytometry. Analysis of cell samples may be done up to 3 days after fixation. Results indicate that the percentages of Class I, Class II, CD3, CD8, CD4, CD45, monocyte, gamma-delta T-cell populations, and total number of granulocytes identified using this method were comparable to standard values or to values obtained following separation of white blood cells from red blood cells. The percentage of labeled B-cells was lower than standard values. Total assay time from receipt of blood to acquisition of data by flow cytometry required less than 2 h. This modified assay was shown to be simple, reliable, and useful for screening large numbers of porcine samples in a minimal period of time.

  3. A rapid method for detection of five known mutations associated with aminoglycoside-induced deafness.

    Science.gov (United States)

    Bardien, Soraya; Human, Hannique; Harris, Tashneem; Hefke, Gwynneth; Veikondis, Rene; Schaaf, H Simon; van der Merwe, Lize; Greinwald, John H; Fagan, Johan; de Jong, Greetje

    2009-01-13

    South Africa has one of the highest incidences of multidrug-resistant tuberculosis (MDR-TB) in the world. Concomitantly, aminoglycosides are commonly used in this country as a treatment against MDR-TB. To date, at least five mutations are known to confer susceptibility to aminoglycoside-induced hearing loss. The aim of the present study was to develop a rapid screening method to determine whether these mutations are present in the South African population. A multiplex method using the SNaPshot technique was used to screen for five mutations in the MT-RNR1 gene: A1555G, C1494T, T1095C, 961delT+C(n) and A827G. A total of 204 South African control samples, comprising 98 Mixed ancestry and 106 Black individuals were screened for the presence of the five mutations. A robust, cost-effective method was developed that detected the presence of all five sequence variants simultaneously. In this pilot study, the A1555G mutation was identified at a frequency of 0.9% in the Black control samples. The 961delT+C(n) variant was present in 6.6% of the Black controls and 2% of the Mixed ancestry controls. The T1095C, C1494T and A827G variants were not identified in any of the study participants. The frequency of 0.9% for the A1555G mutation in the Black population in South Africa is of concern given the high incidence of MDR-TB in this particular ethnic group. Future larger studies are warranted to determine the true frequencies of the aminoglycoside deafness mutations in the general South African population. The high frequencies of the 961delT+C(n) variant observed in the controls suggest that this change is a common non-pathogenic polymorphism. This genetic method facilitates the identification of individuals at high risk of developing hearing loss prior to the start of aminoglycoside therapy. This is important in a low-resource country like South Africa where, despite their adverse side-effects, aminoglycosides will continue to be used routinely and are accompanied with very

  4. ADVANTAGES OF RAPID METHOD FOR DETERMINING SCALE MASS AND DECARBURIZED LAYER OF ROLLED COIL STEEL

    Directory of Open Access Journals (Sweden)

    E. V. Parusov

    2016-08-01

    Full Text Available Purpose. To determine the universal empirical relationships that allow for operational calculation of scale mass and decarbonized layer depth based on the parameters of the technological process for rolled coil steel production. Methodology. The research is carried out on the industrial batches of the rolled steel of SAE 1006 and SAE 1065 grades. Scale removability was determined in accordance with the procedure of «Bekaert» company by the specifi-cations: GA-03-16, GA-03-18, GS-03-02, GS-06-01. The depth of decarbonized layer was identified in accordance with GOST 1763-68 (M method. Findings. Analysis of experimental data allowed us to determine the rational temperature of coil formation of the investigated steel grades, which provide the best possible removal of scale from the metal surface, a minimal amount of scale, as well as compliance of the metal surface color with the require-ments of European consumers. Originality. The work allowed establishing correlation of the basic quality indicators of the rolled coil high carbon steel (scale mass, depth of decarbonized layer and inter-laminar distance in pearlite with one of the main parameters (coil formation temperature of the deformation and heat treatment mode. The re-sulting regression equations, without metallographic analysis, can be used to determine, with a minimum error, the quantitative values of the total scale mass, depth of decarbonized layer and the average inter-lamellar distance in pearlite of the rolled coil high carbon steel. Practical value. Based on the specifications of «Bekaert» company (GA-03-16, GA-03-18, GS-03-02 and GS-06-01 the method of testing descaling by mechanical means from the surface of the rolled coil steel of low- and high-carbon steel grades was developed and approved in the environment of PJSC «ArcelorMittal Kryvyi Rih». The work resulted in development of the rapid method for determination of total and remaining scale mass on the rolled coil steel

  5. Fermentability of carbohydrates in an in vitro batch culture method using inocula from Nile tilapia (Oreochromis niloticus) and European sea bass (Dicentrarchus labrax).

    NARCIS (Netherlands)

    Leenhouwers, J.I.; Pellikaan, W.F.; Huizinga, H.F.A.; Coolen, R.O.M.; Verreth, J.A.J.; Schrama, J.W.

    2008-01-01

    This study investigated in vitro fermentability of wheat-derived carbohydrates using inocula of Nile tilapia and European sea bass. Distal intestinal contents were incubated in bottles containing one of four fermentable substrates, i.e. glucose (GL), native wheat starch (WS), arabinoxylan (ABX) and

  6. A method for red-violet pigments extraction from fruits of Malabar spinach (Basella rubra) with enhanced antioxidant potential under fermentation.

    Science.gov (United States)

    Sravan Kumar, S; Manoj, P; Giridhar, P

    2015-05-01

    Basella rubra fruit juice with a total soluble solids content of 5 to 9 (0)Brix was fermented using the wine yeast Saccharomyces cerevisiae. An 87.5 % of conversion of fermentable sugar was achieved. The TSS ((0)Brix) reduced from 0.60 (0)Brix to 0.17 (0)Brix (71.67 % decrease in TSS) upon performing fermentation of fruit juice water extract with Saccharomyces cerevisiae strain 2. There was 8 folds reduction in pigment quality as evidenced from fermentation. Besides, the potential increase of phenolics, thanks to a higher content of total betalains in general and betacyanins in particular when fermentation was carried out with S. cerevisiae strain 3. The DPPH (2, 2 -diphenyl-1-picrylhydrazyl hydrate) free radical scavenging potential (IC50) of fermented juice (1.9 mg.ml(-1)) was significant over control (2.4 mg.ml(-1)) extracts of B. rubra. The reducing power of fermented extracts was significantly high compared to control samples. The multiple antioxidant activity of fermented extract was also evident by significant reducing power assay when compared to its control samples.

  7. System for extracting protein from a fermentation product

    Energy Technology Data Exchange (ETDEWEB)

    Lawton, Jr., John Warren; Bootsma, Jason Alan; Lewis, Stephen Michael

    2016-04-26

    A method of producing bioproducts from a feedstock in a system configured to produce ethanol and distillers grains from a fermentation product is disclosed. A system configured to process feedstock into a fermentation product and bioproducts including ethanol and meal is disclosed. A bioproduct produced from a fermentation product produced from a feedstock in a biorefining system is disclosed.

  8. Development a rapid and accurate multiplex real time PCR method for the detection Chlamydia trachomatis and Mycoplasma hominis.

    Science.gov (United States)

    Safarkar, Roya; Mehrabadi, Jalil Fallah; Noormohammadi, Zahra; Mirnejad, Reza

    2017-11-01

    Sexually transmitted diseases easily spread among sexually active people and often have no symptoms. Rapid and accurate method for detecting these infections are necessary in early stages. The traditional detection methods of them are difficult and time-consuming. In this study, multiplex real time PCR was optimized for rapid identification of Chlamydia trachomatis and Mycoplasma hominis in a single tube and was performed with our designed primers. The sensitivity test was carried out to designed primers with diluted genomic DNA. To defined the specificity, non STD bacteria were used as DNA template. This study indicated that the developed multiplex real time PCR can be an effective alternative procedure to the conventional methods for rapid and accurate identification of C Chlamydia trachomatis and Mycoplasma hominis. Multiplex real-time PCR Results of them were checked with melting curves. The sensitivity of our designed primer by multiplex real time PCR for Chlamydia trachomatis and Mycoplasma hominis were 4.78×1010 and 8.35×1010 , respectively, Which the primers did not amplify any product from a non-STD species. Multiplex real time PCR by our new primers and analysis of melting curves were successfully usable for rapid and accurate detection of Chlamydia trachomatis and Mycoplasma hominis. This assay instead of traditional culture method, has considerable potential to be rapid, accurate and highly sensitive molecular diagnostic tool for simultaneous and direct detection. © 2017 Wiley Periodicals, Inc.

  9. Development of Novel Method for Rapid Extract of Radionuclides from Solution Using Polymer Ligand Film

    Science.gov (United States)

    Rim, Jung H.

    Accurate and fast determination of the activity of radionuclides in a sample is critical for nuclear forensics and emergency response. Radioanalytical techniques are well established for radionuclides measurement, however, they are slow and labor intensive, requiring extensive radiochemical separations and purification prior to analysis. With these limitations of current methods, there is great interest for a new technique to rapidly process samples. This dissertation describes a new analyte extraction medium called Polymer Ligand Film (PLF) developed to rapidly extract radionuclides. Polymer Ligand Film is a polymer medium with ligands incorporated in its matrix that selectively and rapidly extract analytes from a solution. The main focus of the new technique is to shorten and simplify the procedure necessary to chemically isolate radionuclides for determination by alpha spectrometry or beta counting. Five different ligands were tested for plutonium extraction: bis(2-ethylhexyl) methanediphosphonic acid (H2DEH[MDP]), di(2-ethyl hexyl) phosphoric acid (HDEHP), trialkyl methylammonium chloride (Aliquat-336), 4,4'(5')-di-t-butylcyclohexano 18-crown-6 (DtBuCH18C6), and 2-ethylhexyl 2-ethylhexylphosphonic acid (HEH[EHP]). The ligands that were effective for plutonium extraction further studied for uranium extraction. The plutonium recovery by PLFs has shown dependency on nitric acid concentration and ligand to total mass ratio. H2DEH[MDP] PLFs performed best with 1:10 and 1:20 ratio PLFs. 50.44% and 47.61% of plutonium were extracted on the surface of PLFs with 1M nitric acid for 1:10 and 1:20 PLF, respectively. HDEHP PLF provided the best combination of alpha spectroscopy resolution and plutonium recovery with 1:5 PLF when used with 0.1M nitric acid. The overall analyte recovery was lower than electrodeposited samples, which typically has recovery above 80%. However, PLF is designed to be a rapid field deployable screening technique and consistency is more important

  10. Rapid detection of coliforms in drinking water of Arak city using multiplex PCR method in comparison with the standard method of culture (Most Probably Number)

    OpenAIRE

    fatemeh, Dehghan; Reza, Zolfaghari Mohammad; Mohammad, Arjomandzadegan; Salomeh, Kalantari; Reza, Ahmari Gholam; Hossein, Sarmadian; Maryam, Sadrnia; Azam, Ahmadi; Mana, Shojapoor; Negin, Najarian; Reza, Kasravi Alii; Saeed, Falahat

    2014-01-01

    Objective: To analyse molecular detection of coliforms and shorten the time of PCR. Methods: Rapid detection of coliforms by amplification of lacZ and uidA genes in a multiplex PCR reaction was designed and performed in comparison with most probably number (MPN) method for 16 artificial and 101 field samples. The molecular method was also conducted on isolated coliforms from positive MPN samples; standard sample for verification of microbial method certificated reference material; isolated...

  11. Problems with rapid agglutination methods for identification of Staphylococcus aureus when Staphylococcus saprophyticus is being tested.

    OpenAIRE

    Gregson, D B; Low, D E; Skulnick, M; Simor, A E

    1988-01-01

    Six rapid agglutination tests for identification of Staphylococcus aureus were evaluated by using 62 strains of S. aureus, 63 strains of S. saprophyticus, and 67 strains of other coagulase-negative staphylococci. S. saprophyticus was responsible for 19 of 26 false-positive results and 20 uninterpretable reactions. Thus, urinary staphylococcal isolates that are positive by rapid agglutination tests may require other confirmatory tests for the identification of possible S. saprophyticus.

  12. A Rapid and Reliable Method for Total Protein Extraction from Succulent Plants for Proteomic Analysis.

    Science.gov (United States)

    Lledías, Fernando; Hernández, Felipe; Rivas, Viridiana; García-Mendoza, Abisaí; Cassab, Gladys I; Nieto-Sotelo, Jorge

    2017-08-01

    Crassulacean acid metabolism plants have some morphological features, such as succulent and reduced leaves, thick cuticles, and sunken stomata that help them prevent excessive water loss and irradiation. As molecular constituents of these morphological adaptations to xeric environments, succulent plants produce a set of specific compounds such as complex polysaccharides, pigments, waxes, and terpenoids, to name a few, in addition to uncharacterized proteases. Since all these compounds interfere with the analysis of proteins by electrophoretic techniques, preparation of high quality samples from these sources represents a real challenge. The absence of adequate protocols for protein extraction has restrained the study of this class of plants at the molecular level. Here, we present a rapid and reliable protocol that could be accomplished in 1 h and applied to a broad range of plants with reproducible results. We were able to obtain well-resolved SDS/PAGE protein patterns in extracts from different members of the subfamilies Agavoideae (Agave, Yucca, Manfreda, and Furcraea), Nolinoideae (Dasylirion and Beucarnea), and the Cactaceae family. This method is based on the differential solubility of contaminants and proteins in the presence of acetone and pH-altered solutions. We speculate about the role of saponins and high molecular weight carbohydrates to produce electrophoretic-compatible samples. A modification of the basic protocol allowed the analysis of samples by bidimensional electrophoresis (2DE) for proteomic analysis. Furostanol glycoside 26-O-β-glucosidase (an enzyme involved in steroid saponin synthesis) was successfully identified by mass spectrometry analysis and de novo sequencing of a 2DE spot from an Agave attenuata sample.

  13. Biogas production from ensiled meadow grass; effect of mechanical pretreatments and rapid determination of substrate biodegradability via physicochemical methods

    DEFF Research Database (Denmark)

    Tsapekos, Panagiotis; Kougias, Panagiotis; Angelidaki, Irini

    2015-01-01

    As the biogas sector is rapidly expanding, there is an increasing need in finding new alternative feedstock to biogas plants. Meadow grass can be a suitable co-substrate and if ensiled it can be supplied to biogas plants continuously throughout the year. Nevertheless, this substrate is quite reca...... the methods, electrical conductivity test showed the most promising calibration statistics (R2 = 0.68)....... increased the methane productivity and the increase ranged from 8% to 25%. The best mechanical pretreatment was the usage of two coarse mesh grating plates. Additionally, simple analytical methods were conducted to investigate the possibility of rapidly determining the methane yield of meadow grass. Among...

  14. A rapid and quantitative method to detect human circulating tumor cells in a preclinical animal model.

    Science.gov (United States)

    Tu, Shih-Hsin; Hsieh, Yi-Chen; Huang, Li-Chi; Lin, Chun-Yu; Hsu, Kai-Wen; Hsieh, Wen-Shyang; Chi, Wei-Ming; Lee, Chia-Hwa

    2017-06-23

    As cancer metastasis is the deadliest aspect of cancer, causing 90% of human deaths, evaluating the molecular mechanisms underlying this process is the major interest to those in the drug development field. Both therapeutic target identification and proof-of-concept experimentation in anti-cancer drug development require appropriate animal models, such as xenograft tumor transplantation in transgenic and knockout mice. In the progression of cancer metastasis, circulating tumor cells (CTCs) are the most critical factor in determining the prognosis of cancer patients. Several studies have demonstrated that measuring CTC-specific markers in a clinical setting (e.g., flow cytometry) can provide a current status of cancer development in patients. However, this useful technique has rarely been applied in the real-time monitoring of CTCs in preclinical animal models. In this study, we designed a rapid and reliable detection method by combining a bioluminescent in vivo imaging system (IVIS) and quantitative polymerase chain reaction (QPCR)-based analysis to measure CTCs in animal blood. Using the IVIS Spectrum CT System with 3D-imaging on orthotropic-developed breast-tumor-bearing mice. In this manuscript, we established a quick and reliable method for measuring CTCs in a preclinical animal mode. The key to this technique is the use of specific human and mouse GUS primers on DNA/RNA of mouse peripheral blood under an absolute qPCR system. First, the high sensitivity of cancer cell detection on IVIS was presented by measuring the luciferase carried MDA-MB-231 cells from 5 to 5x10(11) cell numbers with great correlation (R(2) = 0.999). Next, the MDA-MB-231 cell numbers injected by tail vein and their IVIS radiance signals were strongly corrected with qPCR-calculated copy numbers (R(2) > 0.99). Furthermore, by applying an orthotropic implantation animal model, we successfully distinguished xenograft tumor-bearing mice and control mice with a significant difference (p < 0

  15. GUT FERMENTATION SYNDROME

    African Journals Online (AJOL)

    boaz

    individuals who became intoxicated after consuming carbohydrates, which became fermented in the gastrointestinal tract. These claims of intoxication without drinking alcohol, and the findings on endogenous alcohol fermentation are now called Gut. Fermentation Syndrome. This review will concentrate on understanding ...

  16. Rapid Analytical Methods for On-Site Triage for Traumatic Brain Injury

    Science.gov (United States)

    North, Stella H.; Shriver-Lake, Lisa C.; Taitt, Chris R.; Ligler, Frances S.

    2012-07-01

    Traumatic brain injury (TBI) results from an event that causes rapid acceleration and deceleration of the brain or penetration of the skull with an object. Responses to stimuli and questions, loss of consciousness, and altered behavior are symptoms currently used to justify brain imaging for diagnosis and therapeutic guidance. Tests based on such symptoms are susceptible to false-positive and false-negative results due to stress, fatigue, and medications. Biochemical markers of neuronal damage and the physiological response to that damage are being identified. Biosensors capable of rapid measurement of such markers in the circulation offer a solution for on-site triage, as long as three criteria are met: (a) Recognition reagents can be identified that are sufficiently sensitive and specific, (b) the biosensor can provide quantitative assessment of multiple markers rapidly and simultaneously, and (c) both the sensor and reagents are designed for use outside the laboratory.

  17. A rapid sonication based method for preparation of stromal vascular fraction and mesenchymal stem cells from fat tissue

    Directory of Open Access Journals (Sweden)

    Mohammad Amir Amirkhani

    2016-06-01

    Conclusion: The current protocol based on the sonication-mediated cavitation is a rapid, safe and cost-effective method, which is proposed for isolation of SVF and of course ADSCs cultures in a large scale for the clinical trials or therapeutic purposes.

  18. A RAPID DNA EXTRACTION METHOD IS SUCCESSFULLY APPLIED TO ITS-RFLP ANALYSIS OF MYCORRHIZAL ROOT TIPS

    Science.gov (United States)

    A rapid method for extracting DNA from intact, single root tips using a Xanthine solution was developed to handle very large numbers of analyses of ectomycorrhizas. By using an extraction without grinding we have attempted to bias the extraction towards the fungal DNA in the man...

  19. A Boussinesq-type method for fully nonlinear waves interacting with a rapidly varying bathymetry

    DEFF Research Database (Denmark)

    Madsen, Per A.; Fuhrman, David R.; Wang, Benlong

    2006-01-01

    New equations are derived for fully nonlinear and highly dispersive water waves interacting with a rapidly varying bathymetry. The derivation is an extension of a recent high order Boussinesq type formulation valid on a mildly sloping bottom. It is based on a series expansion from a rapidly...... locally deteriorate, and we provide a guideline for using this technique within acceptable accuracy bounds. Numerical results are given for the linear reflection from a plane shelf, a Gaussian shaped trench, and a symmetric trench with sloped transitions. Furthermore, we simulate the linear class I...

  20. Investigating the fermentation of cocoa by correlating denaturing gradient gel electrophoresis profiles and near infrared spectra.

    Science.gov (United States)

    Nielsen, Dennis S; Snitkjaer, Pia; van den Berg, Frans

    2008-07-15

    Raw cocoa has an astringent, unpleasant taste and flavour, and has to be fermented, dried and roasted in order to obtain the characteristic cocoa flavour and taste. During the fermentation microbial activity outside the cocoa beans induces biochemical and physical changes inside the beans. The process is complex involving activity of several different groups of microorganisms which bring about numerous biochemical and physical changes inside the beans. Due to the complexity of these processes no thorough investigations of the interactions between the microbial activities on the outside of the beans and the chemical processes inside the beans have been carried out previously. Recently it has been shown that Denaturing Gradient Gel Electrophoresis (DGGE) offers an efficient tool for monitoring the microbiological changes taking place during the fermentation of cocoa. Near Infrared (NIR) spectroscopy has previously been used to determine various components in cocoa beans, offering a rapid alternative compared to traditional analytical methods for obtaining knowledge about changes in the chemical composition of the cocoa beans during fermentation. During a number of cocoa fermentations bean samples were taken with 24 h intervals to be dried and analysed by NIR. Cocoa pulp samples taken simultaneously during the same fermentations have previously been characterised using DGGE [Nielsen, D.S., Teniola, O.D., Ban-Koffi, L., Owusu, M., Andersson, T., Holzapfel, W.H. (2007). The microbiology of Ghanaian cocoa fermentations analysed using culture dependent and culture-independent methods. International Journal of Food Microbiology 114, 168-186.]. Here we report the first study where microbiological changes during the fermentation determined using DGGE are correlated to changes inside the beans determined by NIR using multivariate data analysis. Following data pre-processing (baseline correction followed by Co-shift correction or Correlation Optimised Warping) the DGGE spectra

  1. Effect of type of fiber, site of fermentation, and method of analysis on digestibility of soluble and insoluble fiber in rabbits.

    Science.gov (United States)

    Abad-Guamán, R; Carabaño, R; Gómez-Conde, M S; García, J

    2015-06-01

    The effect of type of fiber, site of fermentation, method for quantifying insoluble and soluble dietary fiber, and their correction for intestinal mucin on fiber digestibility were examined in rabbits. Three diets differing in soluble fiber were formulated (8.5% soluble fiber, on DM basis, in the low soluble fiber [LSF] diet; 10.2% in the medium soluble fiber [MSF] diet; and 14.5% in the high soluble fiber [HSF] diet). They were obtained by replacing half of the dehydrated alfalfa in the MSF diet with a mixture of beet and apple pulp (HSF diet) or with a mix of oat hulls and soybean protein (LSF diet). Thirty rabbits with ileal T-cannulas were used to determine ileal and fecal digestibility. Cecal digestibility was determined by difference between fecal and ileal digestibility. Insoluble fiber was measured as NDF, insoluble dietary fiber (IDF), and in vitro insoluble fiber, whereas soluble fiber was calculated as the difference between total dietary fiber (TDF) and NDF (TDF-NDF), IDF (TDF-IDF), and in vitro insoluble fiber (TDF-in vitro insoluble fiber). The intestinal mucin content was used to correct the TDF and soluble fiber digestibility. Ileal and fecal concentration of mucin increased from the LSF to the HSF diet group (P digestibility of TDF and soluble fiber increased whereas cecal digestibility decreased (P digestibility of TDF increased from the LSF to the HSF diet group (12.0 vs. 28.1%; P digestibility from the LSF to the HSF diet group (P digestibility of insoluble fiber increased from the LSF to the HSF diet group (11.3 vs. 21.0%; P digestibility for rabbits fed the HSF diet compared with the MSF and LSF diet groups (P digestibility of NDF was higher compared with IDF or in vitro insoluble fiber (P digestibility was higher for the HSF than for the LSF diet group (43.6 vs. 14.5%;P digestibility decreased from the LSF to the HSF diet group (72.1 vs. 49.2%; P digestibility was measured using TDF-NDF (P digestibility whereas the selection of the fiber

  2. Comparing different methods for fast screening of microbiological quality of beach sand aimed at rapid-response remediation.

    Science.gov (United States)

    Testolin, Renan C; Almeida, Tito C M; Polette, Marcus; Branco, Joaquim O; Fischer, Larissa L; Niero, Guilherme; Poyer-Radetski, Gabriel; Silva, Valéria C; Somensi, Cleder A; Corrêa, Albertina X R; Corrêa, Rogério; Rörig, Leonardo R; Itokazu, Ana Gabriela; Férard, Jean-François; Cotelle, Sylvie; Radetski, Claudemir M

    2017-05-15

    There is scientific evidence that beach sands are a significant contributor to the pathogen load to which visitors are exposed. To develop beach quality guidelines all beach zones must be included in microbiological evaluations, but monitoring methods for beach sand quality are relatively longstanding, expensive, laborious and require moderate laboratory infrastructure. This paper aimed to evaluate the microorganism activity in different beach zones applying and comparing a classical method of membrane filtration (MF) with two colorimetric screening methods based on fluorescein (FDA) and tetrazolium (TTC) salt biotransformation to evaluate a new rapid and low-cost method for beach sand microbiological contamination assessments. The colorimetric results can help beach managers to evaluate rapidly and at low cost the microbiological quality of different beach zones in order to decide whether remedial actions need to be adopted to prevent exposure of the public to microbes due to beach sand and/or water contamination. Copyright © 2017. Published by Elsevier Ltd.

  3. Use of Plackett-Burman design for rapid screening of nitrogen and carbon sources for the production of lipase in solid state fermentation by Yarrowia lipolytica from mustard oil cake (Brassica napus

    Directory of Open Access Journals (Sweden)

    Sarat Babu Imandi

    2013-09-01

    Full Text Available Mustard oil cake (Brassica napus, the residue obtained after extraction of mustard oil from mustard oil seeds, was investigated for the production of lipase under solid state fermentation (SSF using the marine yeast Yarrowia lipolytica NCIM 3589. Process parameters such as incubation time, biomass concentration, initial moisture content, carbon source concentration and nitrogen source concentration of the medium were optimized. Screening of ten nitrogen and five carbon sources has been accomplished with the help of Plackett-Burman design. The highest lipase activity of 57.89 units per gram of dry fermented substrate (U/gds was observed with the substrate of mustard oil cake in four days of fermentation.

  4. 1 H-NMR metabolomics: Profiling method for a rapid and efficient ...

    African Journals Online (AJOL)

    Principal component analysis was used to separate groups of samples and to relate known and unknown metabolites to transgenic events. The screening of 100 samples, from extraction to data mining, took 36 h. Thus, this procedure allows the rapid selection of metabolic phenotypes of interest among about 30 transgenic ...

  5. Setaria viridis floral-dip: A simple and rapid Agrobacterium-medicated transformation method

    Science.gov (United States)

    Setaria viridis was recently described as a new monocotyledonous model species for C4 photosynthesis research and genetic transformation. It has biological attributes (rapid life cycle, small genome, diploid, short stature and simple growth requirements) that make it suitable for use as a model plan...

  6. Rapid HPLC method to screen pectins for heterogeneity in methyl-esterification and amidation

    NARCIS (Netherlands)

    Guillotin, S.E.; Loey, van A.; Boulenguer, P.; Schols, H.A.; Voragen, A.G.J.

    2007-01-01

    Functionality of pectins as a food ingredient is strongly related to their chemical fine structure. Chemical characteristics of pectins are determined by many different parameters in their manufacture (choice of the raw material and extraction conditions). Pectin companies are thus in need of rapid

  7. NMR analysis of budding yeast metabolomics: a rapid method for sample preparation.

    Science.gov (United States)

    Airoldi, C; Tripodi, F; Guzzi, C; Nicastro, R; Coccetti, P

    2015-02-01

    Here we propose the optimization of a rapid and reproducible protocol for intracellular metabolite extraction from yeast cells and their metabolic profiling by (1)H-NMR spectroscopy. The protocol reliability has been validated through comparison between the metabolome of cells in different phases of growth or with different genetic backgrounds.

  8. Collision-induced fragmentation accurate mass spectrometric analysis methods to rapidly characterize plant extracts

    Science.gov (United States)

    The rapid advances in analytical chromatography equipment have made the reliable and reproducible measurement of a wide range of plant chemical components possible. Full chemical characterization of a given plant material is possible with the new mass spectrometers currently available. For phytochem...

  9. Development of an analytical method usefull for the quantification of L-Glu & GlutaMAX during fermentation

    OpenAIRE

    Mayor, Mathieu; Kalman, Franka

    2014-01-01

    The objectives of this work are to establish time and cost-efficient methods for the quantification of L-Glutamine and GlutamaxTM in different mediums containing serums. These methods have to be easy to perform and based on a purpose of daily basis analysis of mammalian cells cultures.

  10. Direct PCR - A rapid method for multiplexed detection of different serotypes of Salmonella in enriched pork meat samples

    DEFF Research Database (Denmark)

    Chin, Wai Hoe; Sun, Yi; Høgberg, Jonas

    2017-01-01

    , in this study, we developed a multiplex Direct PCR method for rapid detection of different Salmonella serotypes directly from pork meat samples without any DNA purification steps. An inhibitor-resistant Phusion Pfu DNA polymerase was used to overcome PCR inhibition. Four pairs of primers including a pair...... of newly designed primers targeting Salmonella spp. at subtype level were incorporated in the multiplex Direct PCR. To maximize the efficiency of the Direct PCR, the ratio between sample and dilution buffer was optimized. The sensitivity and specificity of the multiplex Direct PCR were tested using...... and integration into a point-of-need Lab-on-a-chip system for rapid online pathogen detection....

  11. A rapid method of detecting motor blocks in patients with Parkinson's disease during volitional hand movements

    Directory of Open Access Journals (Sweden)

    Popović Mirjana B.

    2002-01-01

    -5%; 56% had MBT% 5-10%; 22% had MBT% 10-15%; 5.5% had MBT% 15-20°% and 2% had MBT% 20-25%. No block lasted more than 25% from the whole movement duration. Table 2 is the summary of mean variability for kinematic indicators of motor block (N, mbt%, t% and for the movement duration T during a 7 day-testing of patients #3. The analysis of calculated data for eight tested PD patients revealed a significant difference (p < 0.01 between healthy controls and three PD patients; data on five PD patients were not significantly different (ns. This method clustered 3 PD patients in the group that experience motor blocks, while the rest were in the group without their significant occurrence. DISCUSSION This algorithm is an additional instrument in classical evaluation of PD patients during their clinical evaluation and treatment. It provides to clinician a rapid feedback on the changes of voluntary hand movements in everyday progress of illness. Furthermore, this method could be of assistance for developing strategies to overcome motor blocks in arm movements at their beginning, as well as for the feedback of the success of drug therapy.

  12. A rapid, efficient, and economic device and method for the isolation and purification of mouse islet cells.

    Directory of Open Access Journals (Sweden)

    Yin Zongyi

    Full Text Available Rapid, efficient, and economic method for the isolation and purification of islets has been pursued by numerous islet-related researchers. In this study, we compared the advantages and disadvantages of our developed patented method with those of commonly used conventional methods (Ficoll-400, 1077, and handpicking methods. Cell viability was assayed using Trypan blue, cell purity and yield were assayed using diphenylthiocarbazone, and islet function was assayed using acridine orange/ethidium bromide staining and enzyme-linked immunosorbent assay-glucose stimulation testing 4 days after cultivation. The results showed that our islet isolation and purification method required 12 ± 3 min, which was significantly shorter than the time required in Ficoll-400, 1077, and HPU groups (34 ± 3, 41 ± 4, and 30 ± 4 min, respectively; P 1000 islets. In summary, the MCT method is a rapid, efficient, and economic method for isolating and purifying murine islet cell clumps. This method overcomes some of the shortcomings of conventional methods, showing a relatively higher quality and yield of islets within a shorter duration at a lower cost. Therefore, the current method provides researchers with an alternative option for islet isolation and should be widely generalized.

  13. A rapid, efficient, and economic device and method for the isolation and purification of mouse islet cells.

    Science.gov (United States)

    Zongyi, Yin; Funian, Zou; Hao, Li; Ying, Cheng; Jialin, Zhang; Baifeng, Li

    2017-01-01

    Rapid, efficient, and economic method for the isolation and purification of islets has been pursued by numerous islet-related researchers. In this study, we compared the advantages and disadvantages of our developed patented method with those of commonly used conventional methods (Ficoll-400, 1077, and handpicking methods). Cell viability was assayed using Trypan blue, cell purity and yield were assayed using diphenylthiocarbazone, and islet function was assayed using acridine orange/ethidium bromide staining and enzyme-linked immunosorbent assay-glucose stimulation testing 4 days after cultivation. The results showed that our islet isolation and purification method required 12 ± 3 min, which was significantly shorter than the time required in Ficoll-400, 1077, and HPU groups (34 ± 3, 41 ± 4, and 30 ± 4 min, respectively; P 1000 islets). In summary, the MCT method is a rapid, efficient, and economic method for isolating and purifying murine islet cell clumps. This method overcomes some of the shortcomings of conventional methods, showing a relatively higher quality and yield of islets within a shorter duration at a lower cost. Therefore, the current method provides researchers with an alternative option for islet isolation and should be widely generalized.

  14. Industrial production of acetone and butanol by fermentation-100 years later.

    Science.gov (United States)

    Sauer, Michael

    2016-07-01

    Microbial production of acetone and butanol was one of the first large-scale industrial fermentation processes of global importance. During the first part of the 20th century, it was indeed the second largest fermentation process, superseded in importance only by the ethanol fermentation. After a rapid decline after the 1950s, acetone-butanol-ethanol (ABE) fermentation has recently gained renewed interest in the context of biorefinery approaches for the production of fuels and chemicals from renewable resources. The availability of new methods and knowledge opens many new doors for industrial microbiology, and a comprehensive view on this process is worthwhile due to the new interest. This thematic issue of FEMS Microbiology Letters, dedicated to the 100th anniversary of the first industrial exploitation of Chaim Weizmann's ABE fermentation process, covers the main aspects of old and new developments, thereby outlining a model development in biotechnology. All major aspects of industrial microbiology are exemplified by this single process. This includes new technologies, such as the latest developments in metabolic engineering, the exploitation of biodiversity and discoveries of new regulatory systems such as for microbial stress tolerance, as well as technological aspects, such as bio- and down-stream processing. © FEMS 2016.

  15. Monitoring yeast physiology during very high gravity wort fermentations by frequent analysis of gene expression.

    Science.gov (United States)

    Rautio, Jari J; Huuskonen, Anne; Vuokko, Heikki; Vidgren, Virve; Londesborough, John

    2007-09-01

    Brewer's yeast experiences constantly changing environmental conditions during wort fermentation. Cells can rapidly adapt to changing surroundings by transcriptional regulation. Changes in genomic expression can indicate the physiological condition of yeast in the brewing process. We monitored, using the transcript analysis with aid of affinity capture (TRAC) method, the expression of some 70 selected genes relevant to wort fermentation at high frequency through 9-10 day fermentations of very high gravity wort (25 degrees P) by an industrial lager strain. Rapid changes in expression occurred during the first hours of fermentations for several genes, e.g. genes involved in maltose metabolism, glycolysis and ergosterol synthesis were strongly upregulated 2-6 h after pitching. By the time yeast growth had stopped (72 h) and total sugars had dropped by about 50%, most selected genes had passed their highest expression levels and total mRNA was less than half the levels during growth. There was an unexpected upregulation of some genes of oxygen-requiring pathways during the final fermentation stages. For five genes, expression of both the Saccharomyces cerevisiae and S. bayanus components of the hybrid lager strain were determined. Expression profiles were either markedly different (ADH1, ERG3) or very similar (MALx1, ILV5, ATF1) between these two components. By frequent analysis of a chosen set of genes, TRAC provided a detailed and dynamic picture of the physiological state of the fermenting yeast. This approach offers a possible way to monitor and optimize the performance of yeast in a complex process environment. Copyright (c) 2007 John Wiley & Sons, Ltd.

  16. Direct determination of calcium, sodium and potassium in fermented milk products

    Directory of Open Access Journals (Sweden)

    Kravić Snežana Ž.

    2012-01-01

    Full Text Available The aim of this study was the investigation of the possibilities of direct determination of calcium, sodium and potassium in the commercial and kombucha-based fermented milk products by flame photometry. Two procedures were used for sample preparation: simple dilution with water (direct method and extraction with mineral acid. Calcium, sodium and potassium levels determined after mentioned sample preparation methods were compared. The results showed that the differences between the values obtained for the different sample treatment were within the experimental error at the 95% confidence level. Compared to the method based on extraction with mineral acid, the direct method is efficient, faster, simpler, cheaper, and operates according to the principles of Green Chemistry. Consequently, the proposed method for the direct determination of calcium, sodium and potassium could be applied for the rapid routine analysis of the mineral content in the fermented dairy products. [Projekat Ministarstva nauke Republike Srbije, br. III 46009

  17. Volatile Compounds Produced by Lactobacillus paracasei During Oat Fermentation.

    Science.gov (United States)

    Lee, Sang Mi; Oh, Jieun; Hurh, Byung-Serk; Jeong, Gwi-Hwa; Shin, Young-Keum; Kim, Young-Suk

    2016-12-01

    This study investigated the profiles of volatile compounds produced by Lactobacillus paracasei during oat fermentation using gas chromatography-mass spectrometry coupled with headspace solid-phase microextraction method. A total of 60 compounds, including acids, alcohols, aldehydes, esters, furan derivatives, hydrocarbons, ketones, sulfur-containing compounds, terpenes, and other compounds, were identified in fermented oat. Lipid oxidation products such as 2-pentylfuran, 1-octen-3-ol, hexanal, and nonanal were found to be the main contributors to oat samples fermented by L. paracasei with the level of 2-pentylfuran being the highest. In addition, the contents of ketones, alcohols, acids, and furan derivatives in the oat samples consistently increased with the fermentation time. On the other hand, the contents of degradation products of amino acids, such as 3-methylbutanal, benzaldehyde, acetophenone, dimethyl sulfide, and dimethyl disulfide, decreased in oat samples during fermentation. Principal component analysis (PCA) was applied to discriminate the fermented oat samples according to different fermentation times. The fermented oats were clearly differentiated on PCA plots. The initial fermentation stage was mainly affected by aldehydes, whereas the later samples of fermented oats were strongly associated with acids, alcohols, furan derivatives, and ketones. The application of PCA to data of the volatile profiles revealed that the oat samples fermented by L. paracasei could be distinguished according to fermentation time. © 2016 Institute of Food Technologists®.

  18. Lactic acid fermentation-aided biomass conversion

    Energy Technology Data Exchange (ETDEWEB)

    Martin, A.M. [Memorial Univ. of Newfoundland, St. John`s, NF (Canada). Dept. of Biochemistry

    1996-09-01

    The preservation of fisheries biomass by lactic acid fermentation is discussed. This method is favourably compared to acid ensiling and fish meal production in terms of safety considerations, energy requirements, simplicity of process and product quality. (Author)

  19. Multivariate analysis of industrial scale fermentation data

    DEFF Research Database (Denmark)

    Mears, Lisa; Nørregård, Rasmus; Stocks, Stuart

    , and thereforeareas offocus for optimising the processoperation.This requires multivariate methods which canutilise the complexdatasetswhich areroutinely collected, containing online measured variables and offline sample data.Fermentation processes are highly sensitive to operational changes, as well as between...

  20. Industrial production of acetone and butanol by fermentation?100 years later

    OpenAIRE

    Sauer, Michael

    2016-01-01

    Microbial production of acetone and butanol was one of the first large-scale industrial fermentation processes of global importance. During the first part of the 20th century, it was indeed the second largest fermentation process, superseded in importance only by the ethanol fermentation. After a rapid decline after the 1950s, acetone-butanol-ethanol (ABE) fermentation has recently gained renewed interest in the context of biorefinery approaches for the production of fuels and chemicals from ...

  1. Production of enzymes by a newly isolated Bacillus sp. TMF-1 in solid state fermentation on agricultural by-products: The evaluation of substrate pretreatment methods.

    Science.gov (United States)

    Salim, Abdalla Ali; Grbavčić, Sanja; Šekuljica, Nataša; Stefanović, Andrea; Jakovetić Tanasković, Sonja; Luković, Nevena; Knežević-Jugović, Zorica

    2017-03-01

    Study on potential of different agro-industrial waste residues for supporting the growth of newly isolated Bacillus sp. TMF-1 strain under solid-state fermentation (SSF) was conducted aiming to produce several industrially valuable enzymes. Since the feasibility of the initial study was confirmed, further objectives included evaluation of several pretreatments of the studied agricultural by-products (soybean meal, sunflower meal, maize bran, maize pericarp, olive oil cake and wheat bran) on the microbial productivity as means of enhancing the yields of produced proteases, α-amylases, cellulases and pectinases. Among acid/alkaline treatment, ultrasound and microwave assisted methods, chemical treatments superiorly affected most of the studied substrates. Highest yields of produced proteases (50.5IUg-1) and α-amylases (50.75IUg-1) were achieved on alkaline treated corn pericarp. Alkaline treatment also promoted the secretion of cellulases on maize bran (1.19IUg-1). Highest yield of pectinases was obtained on untreated soybean meal (64.90IUg-1). Copyright © 2016 Elsevier Ltd. All rights reserved.

  2. Sequential Optimization Methods for Augmentation of Marine Enzymes Production in Solid-State Fermentation: l-Glutaminase Production a Case Study.

    Science.gov (United States)

    Sathish, T; Uppuluri, K B; Veera Bramha Chari, P; Kezia, D

    There is an increased l-glutaminase market worldwide due to its relevant industrial applications. Salt tolerance l-glutaminases play a vital role in the increase of flavor of different types of foods like soya sauce and tofu. This chapter is presenting the economically viable l-glutaminases production in solid-state fermentation (SSF) by Aspergillus flavus MTCC 9972 as a case study. The enzyme production was improved following a three step optimization process. Initially mixture design (MD) (augmented simplex lattice design) was employed to optimize the solid substrate mixture. Such solid substrate mixture consisted of 59:41 of wheat bran and Bengal gram husk has given higher amounts of l-glutaminase. Glucose and l-glutamine were screened as a finest additional carbon and nitrogen sources for l-glutaminase production with help of Plackett-Burman Design (PBD). l-Glutamine also acting as a nitrogen source as well as inducer for secretion of l-glutaminase from A. flavus MTCC 9972. In the final step of optimization various environmental and nutritive parameters such as pH, temperature, moisture content, inoculum concentration, glucose, and l-glutamine levels were optimized through the use of hybrid feed forward neural networks (FFNNs) and genetic algorithm (GA). Through sequential optimization methods MD-PBD-FFNN-GA, the l-glutaminase production in SSF could be improved by 2.7-fold (453-1690U/g). © 2016 Elsevier Inc. All rights reserved.

  3. Passive acoustic methods for fine-scale tracking of harbour porpoises in tidal rapids

    DEFF Research Database (Denmark)

    Macaulay, Jamie; Gordon, Jonathan; Gillespie, Douglas

    2017-01-01

    The growing interest in generating electrical power from tidal currents using tidal turbine generators raises a number of environmental concerns, including the risk that marine mammals might be injured or killed through collision with rotating turbine blades. To understand this risk, information...... on how marine mammals use tidal rapid habitats and in particular, their underwater movements and dive behaviour is required. Porpoises, which are the most abundant small cetacean at most European tidal sites, are difficult animals to tag, and the limited size of tidal habitats means that any telemetered...... animal would be likely to spend only a small proportion of time within them. Here, an alternative approach is explored, whereby passive acoustic monitoring (PAM) is used to obtain fine scale geo-referenced tracks of harbour porpoises in tidal rapid areas. Large aperture hydrophone arrays are required...

  4. Development of rapid methods for relaxation time mapping and motion estimation using magnetic resonance imaging

    OpenAIRE

    Gilani, Syed Irtiza Ali

    2008-01-01

    Recent technological developments in the field of magnetic resonance imaging have resulted in advanced techniques that can reduce the total time to acquire images. For applications such as relaxation time mapping, which enables improved visualisation of in vivo structures, rapid imaging techniques are highly desirable. TAPIR is a Look- Locker-based sequence for high-resolution, multislice T1 relaxation time mapping. Despite the high accuracy and precision of TAPIR, an improveme...

  5. Fermentation to ethanol of pentose-containing spent sulphite liquor.

    Science.gov (United States)

    Yu, S; Wayman, M; Parekh, S K

    1987-06-01

    Ethanolic fermentation of spent sulphite liquor with ordinary bakers' yeast is incomplete because this yeast cannot ferment the pentose sugars in the liquor. This results in poor alcohol yields, and a residual effluent problem By using the yeast Candida shehatae (R) for fermentation of the spent sulphite liquor from a large Canadian alcohol-producing sulphite pulp and paper mill, pentoses as well as hexoses were fermented nearly completely, alcohol yields were raised by 33%, and sugar removal increased by 46%. Inhibitors were removed prior to fermentation by steam stripping. Major benefits were obtained by careful recycling of this yeast, which was shown to be tolerant both of high sugar concentrations and high alcohol concentrations. When sugar concentrations over 250 g/L (glucose: xylose 70:30) were fermented, ethanol became an inhibitor when its concentration reached 90 g/L. However, when the ethanol was removed by low-temperature vacuum distillation, fermentation continued and resulted in a yield of 0.50 g ethanol/g sugar consumed. Further improvement was achieved by combining enzyme saccharification of sugar oligomers with fermentation. This yeast is able to ferment both hexoses and pentoses simultaneously, efficiently, and rapidly. Present indications are that it is well suited to industrial operations wherever hexoses and pentoses are both to be fermented to ethanol, for example, in wood hydrolysates.

  6. The Application of State-of-the-Art Analytic Tools (Biosensors and Spectroscopy in Beverage and Food Fermentation Process Monitoring

    Directory of Open Access Journals (Sweden)

    Shaneel Chandra

    2017-09-01

    Full Text Available The production of several agricultural products and foods are linked with fermentation. Traditional methods used to control and monitor the quality of the products and processes are based on the use of simple chemical analysis. However, these methods are time-consuming and do not provide sufficient relevant information to guarantee the chemical changes during the process. Commonly used methods applied in the agriculture and food industries to monitor fermentation are those based on simple or single-point sensors, where only one parameter is measured (e.g., temperature or density. These sensors are used several times per day and are often the only source of data available from which the conditions and rate of fermentation are monitored. In the modern food industry, an ideal method to control and monitor the fermentation process should enable a direct, rapid, precise, and accurate determination of several target compounds, with minimal to no sample preparation or reagent consumption. Here, state-of-the-art advancements in both the application of sensors and analytical tools to monitor beverage and food fermentation processes will be discussed.

  7. A facile and rapid method for the black pepper leaf mediated green synthesis of silver nanoparticles and the antimicrobial study

    Science.gov (United States)

    Augustine, Robin; Kalarikkal, Nandakumar; Thomas, Sabu

    2014-10-01

    Green synthesis of nanoparticles is widely accepted due to the less toxicity in comparison with chemical methods. But there are certain drawbacks like slow formation of nanoparticles, difficulty to control particle size and shape make them less convenient. Here we report a novel cost-effective and eco-friendly method for the rapid green synthesis of silver nanoparticles using leaf extracts of Piper nigrum. Our results suggest that this method can be used for obtaining silver nanoparticles with controllable size within a few minutes. The fabricated nanoparticles possessed excellent antibacterial property against both Gram-positive and Gram-negative bacteria.

  8. DPS – A rapid method for genome sequencing of DNA-containing bacteriophages directly from a single plaque

    DEFF Research Database (Denmark)

    Kot, Witold; Vogensen, Finn Kvist; Sørensen, Søren J.

    2014-01-01

    methods for characterization of phages is determination of the whole genome using high throughput sequencing approaches. Here a direct plaque sequencing (DPS) is described, which is a rapid method that allows easy full genome sequencing of DNA-containing phages using the Nextera XT™ kit. A combination...... of host-DNA removal followed by purification and concentration of the viral DNA, allowed the construction of Illumina-compatible sequencing libraries using the Nextera™ XT technology directly from single phage plaques without any whole genome amplification step. This method was tested on three...

  9. Rapid Solid-Liquid Dynamic Extraction (RSLDE): a New Rapid and Greener Method for Extracting Two Steviol Glycosides (Stevioside and Rebaudioside A) from Stevia Leaves.

    Science.gov (United States)

    Gallo, Monica; Vitulano, Manuela; Andolfi, Anna; DellaGreca, Marina; Conte, Esterina; Ciaravolo, Martina; Naviglio, Daniele

    2017-06-01

    Stevioside and rebaudioside A are the main diterpene glycosides present in the leaves of the Stevia rebaudiana plant, which is used in the production of foods and low-calorie beverages. The difficulties associated with their extraction and purification are currently a problem for the food processing industries. The objective of this study was to develop an effective and economically viable method to obtain a high-quality product while trying to overcome the disadvantages derived from the conventional transformation processes. For this reason, extractions were carried out using a conventional maceration (CM) and a cyclically pressurized extraction known as rapid solid-liquid dynamic extraction (RSLDE) by the Naviglio extractor (NE). After only 20 min of extraction using the NE, a quantity of rebaudioside A and stevioside equal to 1197.8 and 413.6 mg/L was obtained, respectively, while for the CM, the optimum time was 90 min. From the results, it can be stated that the extraction process by NE and its subsequent purification developed in this study is a simple, economical, environmentally friendly method for producing steviol glycosides. Therefore, this method constitutes a valid alternative to conventional extraction by reducing the extraction time and the consumption of toxic solvents and favouring the use of the extracted metabolites as food additives and/or nutraceuticals. As an added value and of local interest, the experiment was carried out on stevia leaves from the Benevento area (Italy), where a high content of rebaudioside A was observed, which exhibits a sweet taste compared to stevioside, which has a significant bitter aftertaste.

  10. Rapid concentration and sensitive detection of hookworm ova from wastewater matrices using a real-time PCR method.

    Science.gov (United States)

    Gyawali, P; Sidhu, J P S; Ahmed, W; Jagals, P; Toze, S

    2015-12-01

    The risk of human hookworm infections from land application of wastewater matrices could be high in regions with high hookworm prevalence. A rapid, sensitive and specific hookworm detection method from wastewater matrices is required in order to assess human health risks. Currently available methods used to identify hookworm ova to the species level are time consuming and lack accuracy. In this study, a real-time PCR method was developed for the rapid, sensitive and specific detection of canine hookworm (Ancylostoma caninum) ova from wastewater matrices. A. caninum was chosen because of its morphological similarity to the human hookworm (Ancylostoma duodenale and Necator americanus). The newly developed PCR method has high detection sensitivity with the ability to detect less than one A. caninum ova from 1 L of secondary treated wastewater at the mean threshold cycle (CT) values ranging from 30.1 to 34.3. The method is also able to detect four A. caninum ova from 1 L of raw wastewater and from ∼4 g of treated sludge with mean CT values ranging from 35.6 to 39.8 and 39.8 to 39.9, respectively. The better detection sensitivity obtained for secondary treated wastewater compared to raw wastewater and sludge samples could be attributed to sample turbidity. The proposed method appears to be rapid, sensitive and specific compared to traditional methods and has potential to aid in the public health risk assessment associated with land application of wastewater matrices. Furthermore, the method can be adapted to detect other helminth ova of interest from wastewater matrices. Crown Copyright © 2015. Published by Elsevier Inc. All rights reserved.

  11. Rapid determination method for 2-DCB in irradiated pork by ASE-Al2O3-GC-MS

    Science.gov (United States)

    Li, An; Pan, Li-Gang; Zhang, Xiu-Tong; Jin, Xin-Xin; Ma, Hong-Zao

    2017-01-01

    2-Dodecylcyclobutanone (2-DCB) is validated as a marker for irradiated foodstuffs. However, the preparation methods for the marker compound involve time-consuming and tedious procedures prior to analysis. This paper describes a rapid method for the extraction and cleanup of 2-DCB in irradiated pork. The highly automated extraction procedure is based on accelerated solvent extraction combined with a purification step by Al2O3, which is added to the extraction cell. The overall extraction time is less than 20 min, and the volume of the solvent is 1.5 times that of the extraction cell (34 mL). The recovery of 2-DCB from pork samples for this method is higher than 75%. The method allows detecting pork irradiated at low doses (0.5 kGy). The proposed method is considered an alternative to the Soxhlet extraction and Florisil chromatography method currently in use.

  12. A simple and rapid visual method for the determination of ammonia nitrogen in environmental waters using thymol

    Energy Technology Data Exchange (ETDEWEB)

    Okumura, M.; Fujinaga, K.; Seike, Y.; Honda, S. [Dept. of Material Science, Interdisciplinary Faculty of Science and Engineering, Shimane University, Matsue (Japan)

    1999-11-01

    Simple visual and spectrophotometric methods for the determination of ammonia nitrogen in water are proposed, based on the color development of indothymol blue formed between ammonia and thymol. The color development was accelerated by nitroprusside to complete in 3 min. This color development is remarkably rapid compared with that of the other conventional methods with indothymol blue and indophenol blue. The concentration range of ammonia nitrogen spectrophotometrically determined was 0.04-1.2 mg/L NH{sub 4}-N. The absorbance per 1 {mu}g NH{sub 4}-N was 0.0215 (molar absorptivity = 1.51 x 10{sup 4}) at 690 nm. The visual method not using any instrument as an in situ method in field works was developed based on the optimum conditions for the established spectrophotometric method. This visual method was successfully applied to the determination of ammonia nitrogen in environmental waters. (orig.)

  13. A novel method for perceptual assessment of small room acoustics using rapid sensory analysis

    DEFF Research Database (Denmark)

    Kaplanis, Neofytos; Bech, Søren; Lokki, Tapio

    2016-01-01

    small rooms and car cabins. In-situ measurements were performed to obtain a range of possible acoustical settings, by varying physically the spaces under investigation. The measured responses were spatiallyanalyzed and synthesized to reproduce the observed fields in the laboratory. Expert listeners were...... presented with auralized sound over a loudspeaker array and followed a rapid sensory analysis protocol. The elicited attributes and ratings are analyzed and possible links to the acoustical properties of these spaces are discussed. [This study is a part of Marie Curie Network on Dereverberation...

  14. Rapid prototyping tools and methods for all-Topas (R) cyclic olefin copolymer fluidic microsystems

    DEFF Research Database (Denmark)

    Bundgaard, Frederik; Perozziello, Gerardo; Geschke, Oliver

    2006-01-01

    Topas (R), the cyclic olefin copolymer, from Topas Advanced Polymers GmbH has a number of advantages over polymers such as poly(methylmethacrylate), polydimethylsiloxane, and polycarbonate traditionally used in fluid microsystem manufacturing, such as low water absorption, high chemical resistance......, good machinability, and good optical properties. A number of different processes for rapid and low-cost prototyping of all-Topas microfluidic systems, made with desktop machinery, are presented. Among the processes are micromilling of fluidic structures with a width down to 25 p,m and sealing...

  15. MacroEvoLution: A New Method for the Rapid Generation of Novel Scaffold-Diverse Macrocyclic Libraries.

    Science.gov (United States)

    Saupe, Jörn; Kunz, Oliver; Haustedt, Lars Ole; Jakupovic, Sven; Mang, Christian

    2017-09-04

    Macrocycles are a structural class bearing great promise for future challenges in medicinal chemistry. Nevertheless, there are few flexible approaches for the rapid generation of structurally diverse macrocyclic compound collections. Here, an efficient method for the generation of novel macrocyclic peptide-based scaffolds is reported. The process, named here as "MacroEvoLution", is based on a cyclization screening approach that gives reliable access to novel macrocyclic architectures. Classification of building blocks into specific pools ensures that scaffolds with orthogonally addressable functionalities are generated, which can easily be used for the generation of structurally diverse compound libraries. The method grants rapid access to novel scaffolds with scalable synthesis (multi gram scale) and the introduction of further diversity at a late stage. Despite being developed for peptidic systems, the approach can easily be extended for the synthesis of systems with a decreased peptidic character. © 2017 The Authors. Published by Wiley-VCH Verlag GmbH & Co. KGaA.

  16. MacroEvoLution: A New Method for the Rapid Generation of Novel Scaffold‐Diverse Macrocyclic Libraries

    Science.gov (United States)

    Saupe, Jörn; Kunz, Oliver; Haustedt, Lars Ole; Jakupovic, Sven

    2017-01-01

    Abstract Macrocycles are a structural class bearing great promise for future challenges in medicinal chemistry. Nevertheless, there are few flexible approaches for the rapid generation of structurally diverse macrocyclic compound collections. Here, an efficient method for the generation of novel macrocyclic peptide‐based scaffolds is reported. The process, named here as “MacroEvoLution”, is based on a cyclization screening approach that gives reliable access to novel macrocyclic architectures. Classification of building blocks into specific pools ensures that scaffolds with orthogonally addressable functionalities are generated, which can easily be used for the generation of structurally diverse compound libraries. The method grants rapid access to novel scaffolds with scalable synthesis (multi gram scale) and the introduction of further diversity at a late stage. Despite being developed for peptidic systems, the approach can easily be extended for the synthesis of systems with a decreased peptidic character. PMID:28715083

  17. Evaluation of culture methods for rapid screening of swine faecal samples for Yersinia enterocolitica O : 3 biotype 4

    DEFF Research Database (Denmark)

    Hoorfar, Jeffrey; Holmvig, C.B.F.

    1999-01-01

    In two studies, seven different culture protocols were compared to test naturally contaminated faecal samples from pigs for isolation of Y. enterocolitica serotype O; 3/biotype 4( n = 70 and n = 79). Four of the protocols were based on the Nordic Committee on Food Analysis (NMKL protocols), while...... three protocols were based on a rapid and selective method (here called ITC protocols). The protocols differed mainly in time of pre-enrichment (1, 10 and 24 d) and enrichment (2, 10, 24 d) and the type of selective enrichment media (ITC vs. MRB). The sensitivity of the rapid ITC protocol (24% and 9...... indicate possibilities of shortening the culture methods by replacing most of the biochemical tests with an agglutination test based on a monoclonal antibody....

  18. Designing and comparison study of rapid detection methods of resistance to injectable drugs in clinical strains of Mycobacterium tuberculosis

    Directory of Open Access Journals (Sweden)

    Fatemeh Salehi

    2012-01-01

    Full Text Available Introduction: In this study, some molecular methods were designed for rapid detection of resistance to kanamycin and amikacin.Materials and methods: Among 120 clinical isolates of mycobacterium tuberculosis, 70 strains were selected for evaluation of possible mutations. A PCR-RFLP method was designed for detection of wild type (using enzyme ajii and mutant from (BstFNI enzyme of the isolates. Furthermore, allele specific method (as PCR was designed for detection mutations in codons 1401 and 1402 gene rrs. Some selected isolates were sequenced.Results: In PCR-RFLP method, among the 70 strains examined by BstFNI enzyme, could detect 17 mutant strains among 24 phenotypicaly resistant and 44 non-mutant isolates from 46 susceptible isolates. The sensitivity of this method was %70.83 and specificity was %95.65 on the other hand, 12 mutant from 20 resistant strains and 29 non-mutant strains from 32 susceptible strains were detected by AjiI enzyme. The sensitivity and specificity of this method was 60 and %90.62, respectively. In MAS PCR, 3 mutants from 6 resistant strains and 12 non-mutants from 17 resistant strains were detected. The sensitivity of this method was 50 and specificity was 70.58. Results of sequencing method confirmed the results of molecular methods.Discussion and conclusion: PCR-RFLP method by BstFNI enzyme was the best method for rapid detection of Mycobacterium tuberculosis resistant to second-line injectable drugs and was recommended for routine use.

  19. rapid mini-prep DNA extraction method in rice (Oryza sativa ...

    African Journals Online (AJOL)

    method, optimized for rice, which was achieved via some modifications in present DNA extraction methods, especially in first step of cell wall lyses and the use of cheap and frequent chemicals found in every laboratory is presented. Normal quality and quantity was obtained by the method. The PCR based assays also ...

  20. [A rapid method for the quantitative determination of protein in urine].

    Science.gov (United States)

    Kariagina, I Iu; Slepysheva, V V; Kozlov, A V

    1996-01-01

    A simple, economic, and available method for measuring protein in the urine is proposed. It is based on the capacity of bromophenol blue stain to form a complex with proteins in acid medium, which is characterized by absorption maximum at a wave-length of 597 nm. The proposed method is compared with the sulfosalicylic acid test and the Biuret method.