WorldWideScience

Sample records for rapid intelligent inspection

  1. Artificial Intelligence Assists Ultrasonic Inspection

    Science.gov (United States)

    Schaefer, Lloyd A.; Willenberg, James D.

    1992-01-01

    Subtle indications of flaws extracted from ultrasonic waveforms. Ultrasonic-inspection system uses artificial intelligence to help in identification of hidden flaws in electron-beam-welded castings. System involves application of flaw-classification logic to analysis of ultrasonic waveforms.

  2. MIXI: Mobile Intelligent X-Ray Inspection System

    Science.gov (United States)

    Arodzero, Anatoli; Boucher, Salime; Kutsaev, Sergey V.; Ziskin, Vitaliy

    2017-07-01

    A novel, low-dose Mobile Intelligent X-ray Inspection (MIXI) concept is being developed at RadiaBeam Technologies. The MIXI concept relies on a linac-based, adaptive, ramped energy source of short X-ray packets of pulses, a new type of fast X-ray detector, rapid processing of detector signals for intelligent control of the linac, and advanced radiography image processing. The key parameters for this system include: better than 3 mm line pair resolution; penetration greater than 320 mm of steel equivalent; scan speed with 100% image sampling rate of up to 15 km/h; and material discrimination over a range of thicknesses up to 200 mm of steel equivalent. Its minimal radiation dose, size and weight allow MIXI to be placed on a lightweight truck chassis.

  3. The level and nature of autistic intelligence III: Inspection time.

    Science.gov (United States)

    Barbeau, Elise B; Soulières, Isabelle; Dawson, Michelle; Zeffiro, Thomas A; Mottron, Laurent

    2013-02-01

    Across the autism spectrum, level of intelligence is highly dependent on the psychometric instrument used for assessment, and there are conflicting views concerning which measures best estimate autistic cognitive abilities. Inspection time is a processing speed measure associated with general intelligence in typical individuals. We therefore investigated autism spectrum performance on inspection time in relation to two different general intelligence tests. Autism spectrum individuals were divided into autistic and Asperger subgroups according to speech development history. Compared to a typical control group, mean inspection time for the autistic subgroup but not the Asperger subgroup was significantly shorter (by 31%). However, the shorter mean autistic inspection time was evident only when groups were matched on Wechsler IQ and disappeared when they were matched using Raven's Progressive Matrices. When autism spectrum abilities are compared to typical abilities, results may be influenced by speech development history as well as by the instrument used for intelligence matching. 2013 APA, all rights reserved

  4. An intelligent inspection and survey robot

    Energy Technology Data Exchange (ETDEWEB)

    Byrd, J.S. [Univ. of South Carolina, Columbia, SC (United States)

    1995-10-01

    Large quantities of mixed and low-level radioactive waste contained in 55-, 85-, and 110-gallon steel drums are stored at Department of Energy (DOE) warehouses located throughout the United States. The steel drums are placed on pallets and stacked on top of one another, forming a column of drums ranging in heights of one to four drums and up to 16 feet high. The columns of drums are aligned in rows forming an aisle approximately three feet wide between the rows of drums. Tens of thousands of drums are stored in these warehouses throughout the DOE complex. ARIES (Autonomous Robotic Inspection Experimental System) is under development for the DOE to survey and inspect these drums. The robot will navigate through the aisles and perform an inspection operation, typically performed by a human operator, making decisions about the condition of the drums and maintaining a data of pertinent information about each drum.

  5. Bionic Vision-Based Intelligent Power Line Inspection System.

    Science.gov (United States)

    Li, Qingwu; Ma, Yunpeng; He, Feijia; Xi, Shuya; Xu, Jinxin

    2017-01-01

    Detecting the threats of the external obstacles to the power lines can ensure the stability of the power system. Inspired by the attention mechanism and binocular vision of human visual system, an intelligent power line inspection system is presented in this paper. Human visual attention mechanism in this intelligent inspection system is used to detect and track power lines in image sequences according to the shape information of power lines, and the binocular visual model is used to calculate the 3D coordinate information of obstacles and power lines. In order to improve the real time and accuracy of the system, we propose a new matching strategy based on the traditional SURF algorithm. The experimental results show that the system is able to accurately locate the position of the obstacles around power lines automatically, and the designed power line inspection system is effective in complex backgrounds, and there are no missing detection instances under different conditions.

  6. Rapid Ultrasonic Inspection of Artillery Projectiles.

    Science.gov (United States)

    1978-05-01

    study and the second-phase study have all been directed toward the third and final phase which includes the construction and installation of an...under normal field bias. 9 Rockwell Intemational Scince Center SC5113.4FR currents will be inductively detected by the wire and appropriate electronic... directed at the definition of a total inspection system configuration and the design and development of key technical components so that, when initiated

  7. Research on UAV Intelligent Obstacle Avoidance Technology During Inspection of Transmission Line

    Science.gov (United States)

    Wei, Chuanhu; Zhang, Fei; Yin, Chaoyuan; Liu, Yue; Liu, Liang; Li, Zongyu; Wang, Wanguo

    Autonomous obstacle avoidance of unmanned aerial vehicle (hereinafter referred to as UAV) in electric power line inspection process has important significance for operation safety and economy for UAV intelligent inspection system of transmission line as main content of UAV intelligent inspection system on transmission line. In the paper, principles of UAV inspection obstacle avoidance technology of transmission line are introduced. UAV inspection obstacle avoidance technology based on particle swarm global optimization algorithm is proposed after common obstacle avoidance technologies are studied. Stimulation comparison is implemented with traditional UAV inspection obstacle avoidance technology which adopts artificial potential field method. Results show that UAV inspection strategy of particle swarm optimization algorithm, adopted in the paper, is prominently better than UAV inspection strategy of artificial potential field method in the aspects of obstacle avoidance effect and the ability of returning to preset inspection track after passing through the obstacle. An effective method is provided for UAV inspection obstacle avoidance of transmission line.

  8. Feature-based tolerancing for intelligent inspection process definition

    Energy Technology Data Exchange (ETDEWEB)

    Brown, C.W.

    1993-07-01

    This paper describes a feature-based tolerancing capability that complements a geometric solid model with an explicit representation of conventional and geometric tolerances. This capability is focused on supporting an intelligent inspection process definition system. The feature-based tolerance model`s benefits include advancing complete product definition initiatives (e.g., STEP -- Standard for Exchange of Product model dam), suppling computer-integrated manufacturing applications (e.g., generative process planning and automated part programming) with product definition information, and assisting in the solution of measurement performance issues. A feature-based tolerance information model was developed based upon the notion of a feature`s toleranceable aspects and describes an object-oriented scheme for representing and relating tolerance features, tolerances, and datum reference frames. For easy incorporation, the tolerance feature entities are interconnected with STEP solid model entities. This schema will explicitly represent the tolerance specification for mechanical products, support advanced dimensional measurement applications, and assist in tolerance-related methods divergence issues.

  9. An intelligent inspection and survey robot. Volume 1

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-15

    ARIES {number_sign}1 (Autonomous Robotic Inspection Experimental System), has been developed for the Department of Energy to survey and inspect drums containing low-level radioactive waste stored in warehouses at DOE facilities. The drums are typically stacked four high and arranged in rows with three-foot aisle widths. The robot will navigate through the aisles and perform an inspection operation, typically performed by a human operator, making decisions about the condition of the drums and maintaining a database of pertinent information about each drum. A new version of the Cybermotion series of mobile robots is the base mobile vehicle for ARIES. The new Model K3A consists of an improved and enhanced mobile platform and a new turret that will permit turning around in a three-foot aisle. Advanced sonar and lidar systems were added to improve navigation in the narrow drum aisles. Onboard computer enhancements include a VMEbus computer system running the VxWorks real-time operating system. A graphical offboard supervisory UNIX workstation is used for high-level planning, control, monitoring, and reporting. A camera positioning system (CPS) includes primitive instructions for the robot to use in referencing and positioning the payload. The CPS retracts to a more compact position when traveling in the open warehouse. During inspection, the CPS extends up to deploy inspection packages at different heights on the four-drum stacks of 55-, 85-, and 110-gallon drums. The vision inspection module performs a visual inspection of the waste drums. This system will locate and identify each drum, locate any unique visual features, characterize relevant surface features of interest and update a data-base containing the inspection data.

  10. An intelligent inspection and survey robot. Volume 2

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-15

    Radioactive materials make up a significant part of the hazardous-material inventory of the Department of Energy. Much of the radioactive material will be inspected or handled by robotic systems that contain electronic circuits that may be damaged by gamma radiation and other particles emitted from radioactive material. This report examines several scenarios, the damage that may be inflicted, and methods that may be used to protect radiation-hardened robot control systems. Commercial sources of components and microcomputers that can withstand high radiation exposure are identified.

  11. VAPI: low-cost, rapid automated visual inspection system for Petri plate analysis

    Science.gov (United States)

    Chatburn, L. T.; Kirkup, B. C.; Polz, M. F.

    2007-09-01

    Most culture-based microbiology tasks utilize a petri plate during processing, but rarely do the scientists capture the full information available from the plate. In particular, visual analysis of plates is an under-developed rich source of data that can be rapid and non-invasive. However, collecting this data has been limited by the difficulties of standardizing and quantifying human observations, by the limits of a scientists' fatigue, and by the cost of automating the process. The availability of specialized counting equipment and intelligent camera systems has not changed this - they are prohibitively expensive for many laboratories, only process a limited number of plate types, are often destructive to the sample, and have limited accuracy. This paper describes an automated visual inspection solution, VAPI, that employs inexpensive consumer computing hardware and digital cameras along with custom cross-platform open-source software written in C++, combining Trolltech's Qt GUI toolkit with Intel's OpenCV computer vision library. The system is more accurate than common commercial systems costing many times as much, while being flexible in use and offering comparable responsiveness. VAPI not only counts colonies but also sorts and enumerates colonies by morphology, tracks colony growth by time series analysis, and provides other analytical resources. Output to XML files or directly to a database provides data that can be easily maintained and manipulated by the end user, offering ready access for system enhancement, interaction with other software systems, and rapid development of advanced analysis applications.

  12. Mobile Imaging and Computing for Intelligent Structural Damage Inspection

    Directory of Open Access Journals (Sweden)

    ZhiQiang Chen

    2014-01-01

    Full Text Available Optical imaging is a commonly used technique in civil engineering for aiding the archival of damage scenes and more recently for image analysis-based damage quantification. However, the limitations are evident when applying optical imaging in the field. The most significant one is the lacking of computing and processing capability in the real time. The advancement of mobile imaging and computing technologies provides a promising opportunity to change this norm. This paper first provides a timely introduction of the state-of-the-art mobile imaging and computing technologies for the purpose of engineering application development. Further we propose a mobile imaging and computing (MIC framework for conducting intelligent condition assessment for constructed objects, which features in situ imaging and real-time damage analysis. This framework synthesizes advanced mobile technologies with three innovative features: (i context-enabled image collection, (ii interactive image preprocessing, and (iii real-time image analysis and analytics. Through performance evaluation and field experiments, this paper demonstrates the feasibility and efficiency of the proposed framework.

  13. Cooperative Behaviours with Swarm Intelligence in Multirobot Systems for Safety Inspections in Underground Terrains

    Directory of Open Access Journals (Sweden)

    Chika Yinka-Banjo

    2014-01-01

    Full Text Available Underground mining operations are carried out in hazardous environments. To prevent disasters from occurring, as often as they do in underground mines, and to prevent safety routine checkers from disasters during safety inspection checks, multirobots are suggested to do the job of safety inspection rather than human beings and single robots. Multirobots are preferred because the inspection task will be done in the minimum amount of time. This paper proposes a cooperative behaviour for a multirobot system (MRS to achieve a preentry safety inspection in underground terrains. A hybrid QLACS swarm intelligent model based on Q-Learning (QL and the Ant Colony System (ACS was proposed to achieve this cooperative behaviour in MRS. The intelligent model was developed by harnessing the strengths of both QL and ACS algorithms. The ACS optimizes the routes used for each robot while the QL algorithm enhances the cooperation between the autonomous robots. A description of a communicating variation within the QLACS model for cooperative behavioural purposes is presented. The performance of the algorithms in terms of without communication, with communication, computation time, path costs, and the number of robots used was evaluated by using a simulation approach. Simulation results show achieved cooperative behaviour between robots.

  14. Risk-based Inspection Scheduling Planning for Intelligent Agent in the Autonomous Fault Management

    Science.gov (United States)

    Hari Nugroho, Djoko; Sudarno

    2010-06-01

    This paper developed an autonomous fault management focusing to the inspection scheduling planning which was implemented to the advanced small nuclear reactor without on-site refuelling to assure the safety without human intervention. The inspection scheduling planning was developed optimally on the risk-based approach compromising between two important constraints related to the risk of action planning as such failure probability and shortest path. Performance was represented using computer simulation implemented to the DURESS components location and failure probability. It could be concluded that the first priority to be inspected was flow sensor FB2 which had the largest comparation value of 0.104233 comparing with the other components. The next route would be visited were sequentially FB1, FA2, FA1, FB, FA, VB, pump B, VA, pump A, VB2, VB1, VA2, VA1, reservoir 2, reservoir 1, FR2, and FR1. The movement route planning could be transferred to activate the robot arm which reflected as intelligent agent.

  15. An Intelligent Tap Test as AN Inspection Tool for Corrosion in Chequer Plate Floors

    Science.gov (United States)

    Williams, S. M.; Smith, J. W.

    2002-11-01

    The "coin-tap" test has the ability to indicate damage in a structural element due to a localized change of stiffness or damping. The change in vibration signature may be detected by ear or more precisely by measurement of the dynamic contact force. A method for discriminating between measurements made on sound and damaged structures is presented. An unsupervised neural network algorithm is used for recognizing the differences between contact force patterns. The method is used for non-destructive inspection of corrosion damage to steel chequer plate floors in industrial buildings. It is shown that the intelligent tap test is a useful and practical diagnostic tool for detecting localized damage in structures.

  16. Motivated or Paralyzed? Individuals' Beliefs about Intelligence Influence Performance Outcome of Expecting Rapid Feedback

    Science.gov (United States)

    Zhao, Qin; Zhang, Jie; Vance, Kaleigh

    2013-01-01

    The current research examines whether and how beliefs about intelligence moderate the effects of expecting rapid feedback on exam performance. Thirty-six undergraduates participated in a field experiment with two between-subjects independent variables: anticipated feedback proximity and beliefs about intelligence. The results show that expecting…

  17. AERCam Autonomy: Intelligent Software Architecture for Robotic Free Flying Nanosatellite Inspection Vehicles

    Science.gov (United States)

    Fredrickson, Steven E.; Duran, Steve G.; Braun, Angela N.; Straube, Timothy M.; Mitchell, Jennifer D.

    2006-01-01

    with minimal impact on IVA operators and ground controllers, the Mini AERCam system architecture incorporates intelligent systems attributes that support various autonomous capabilities. 1) A robust command sequencer enables task-level command scripting. Command scripting is employed for operations such as automatic inspection scans over a region of interest, and operator-hands-off automated docking. 2) A system manager built on the same expert-system software as the command sequencer provides detection and smart-response capability for potential system-level anomalies, like loss of communications between the Free Flyer and control station. 3) An AERCam dynamics manager provides nominal and off-nominal management of guidance, navigation, and control (GN&C) functions. It is employed for safe trajectory monitoring, contingency maneuvering, and related roles. This paper will describe these architectural components of Mini AERCam autonomy, as well as the interaction of these elements with a human operator during supervised autonomous control.

  18. Crystallized Intelligence as a Product of Speed and Drive for Experience: The Relationship of Inspection Time and Openness to "g" and Gc.

    Science.gov (United States)

    Bates, Timothy C.; Shieles, Alexandra

    2003-01-01

    Explored the relationship of inspection time (IT) and the personality domain of openness (O) to general intelligence ("g") and crystallized intelligence (Gc). Findings for 64 undergraduates support the independence of O from speed of information processing and from general ability. (SLD)

  19. Intelligent Mobile Sensor System for drum inspection and monitoring -- Volume 1. Final report, October 1, 1993--April 22, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    The objective of the Intelligent Mobile Sensor System (IMSS) project is to develop an operational system for monitoring and inspection activities for waste storage facility operations at several DOE sites. Specifically, the product of this effort is a robotic device with enhanced intelligence and maneuverability capable of conducting routine inspection of stored waste drums. The device is capable of operating in the narrow free aisle space between rows of stacked drums. The system has an integrated sensor suite for problem-drum detection, and is linked to a site database both for inspection planning and for data correlation, updating, and report generation. The system is capable of departing on an assigned mission, collecting required data, recording which portions of its mission had to be aborted or modified due to environmental constraints, and reporting back when the mission is complete. Successful identification of more than 96% of drum defects has been demonstrated in a high fidelity waste storage facility mockup. Identified anomalies included rust spots, rust streaks, areas of corrosion, dents, and tilted drums. All drums were positively identified and correlated with the site database. This development effort is separated into three phases of which phase two is now complete. The first phase demonstrated an integrated system (maturity level IVa) for monitoring and inspection activities for waste storage facility operations. The second phase demonstrated a prototype system appropriate for operational use in an actual storage facility. The prototype provides an integrated design that considers operational requirements, hardware costs, maintenance, safety, and robustness. The final phase will demonstrate commercial viability using the prototype vehicle in a pilot waste operations and inspection project. This report summarizes the design and evaluation of the new IMSS Phase 2 system and vehicle.

  20. An Intelligent Automation Platform for Rapid Bioprocess Design.

    Science.gov (United States)

    Wu, Tianyi; Zhou, Yuhong

    2014-08-01

    Bioprocess development is very labor intensive, requiring many experiments to characterize each unit operation in the process sequence to achieve product safety and process efficiency. Recent advances in microscale biochemical engineering have led to automated experimentation. A process design workflow is implemented sequentially in which (1) a liquid-handling system performs high-throughput wet lab experiments, (2) standalone analysis devices detect the data, and (3) specific software is used for data analysis and experiment design given the user's inputs. We report an intelligent automation platform that integrates these three activities to enhance the efficiency of such a workflow. A multiagent intelligent architecture has been developed incorporating agent communication to perform the tasks automatically. The key contribution of this work is the automation of data analysis and experiment design and also the ability to generate scripts to run the experiments automatically, allowing the elimination of human involvement. A first-generation prototype has been established and demonstrated through lysozyme precipitation process design. All procedures in the case study have been fully automated through an intelligent automation platform. The realization of automated data analysis and experiment design, and automated script programming for experimental procedures has the potential to increase lab productivity. © 2013 Society for Laboratory Automation and Screening.

  1. An Intelligent Automation Platform for Rapid Bioprocess Design

    Science.gov (United States)

    Wu, Tianyi

    2014-01-01

    Bioprocess development is very labor intensive, requiring many experiments to characterize each unit operation in the process sequence to achieve product safety and process efficiency. Recent advances in microscale biochemical engineering have led to automated experimentation. A process design workflow is implemented sequentially in which (1) a liquid-handling system performs high-throughput wet lab experiments, (2) standalone analysis devices detect the data, and (3) specific software is used for data analysis and experiment design given the user’s inputs. We report an intelligent automation platform that integrates these three activities to enhance the efficiency of such a workflow. A multiagent intelligent architecture has been developed incorporating agent communication to perform the tasks automatically. The key contribution of this work is the automation of data analysis and experiment design and also the ability to generate scripts to run the experiments automatically, allowing the elimination of human involvement. A first-generation prototype has been established and demonstrated through lysozyme precipitation process design. All procedures in the case study have been fully automated through an intelligent automation platform. The realization of automated data analysis and experiment design, and automated script programming for experimental procedures has the potential to increase lab productivity. PMID:24088579

  2. The Virtual Environment for Rapid Prototyping of the Intelligent Environment

    Directory of Open Access Journals (Sweden)

    Yannick Francillette

    2017-11-01

    Full Text Available Advances in domains such as sensor networks and electronic and ambient intelligence have allowed us to create intelligent environments (IEs. However, research in IE is being held back by the fact that researchers face major difficulties, such as a lack of resources for their experiments. Indeed, they cannot easily build IEs to evaluate their approaches. This is mainly because of economic and logistical issues. In this paper, we propose a simulator to build virtual IEs. Simulators are a good alternative to physical IEs because they are inexpensive, and experiments can be conducted easily. Our simulator is open source and it provides users with a set of virtual sensors that simulates the behavior of real sensors. This simulator gives the user the capacity to build their own environment, providing a model to edit inhabitants’ behavior and an interactive mode. In this mode, the user can directly act upon IE objects. This simulator gathers data generated by the interactions in order to produce datasets. These datasets can be used by scientists to evaluate several approaches in IEs.

  3. The Virtual Environment for Rapid Prototyping of the Intelligent Environment.

    Science.gov (United States)

    Francillette, Yannick; Boucher, Eric; Bouzouane, Abdenour; Gaboury, Sébastien

    2017-11-07

    Advances in domains such as sensor networks and electronic and ambient intelligence have allowed us to create intelligent environments (IEs). However, research in IE is being held back by the fact that researchers face major difficulties, such as a lack of resources for their experiments. Indeed, they cannot easily build IEs to evaluate their approaches. This is mainly because of economic and logistical issues. In this paper, we propose a simulator to build virtual IEs. Simulators are a good alternative to physical IEs because they are inexpensive, and experiments can be conducted easily. Our simulator is open source and it provides users with a set of virtual sensors that simulates the behavior of real sensors. This simulator gives the user the capacity to build their own environment, providing a model to edit inhabitants' behavior and an interactive mode. In this mode, the user can directly act upon IE objects. This simulator gathers data generated by the interactions in order to produce datasets. These datasets can be used by scientists to evaluate several approaches in IEs.

  4. Intelligent mobile sensor system for drum inspection and monitoring: Topical report, October 1, 1993--April 22, 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-04-01

    The objective of the Intelligent Mobile Sensor System (IMSS) project is to develop an operational system for monitoring and inspection activities for waste storage facility operations at several DOE sites. Specifically, the product of this effort is a robotic device with enhanced intelligence and maneuverability capable of conducting routine inspection of stored waste drums. The system has an integrated sensor suite for problem-drum detection, and is linked to a site database both for inspection planning and for data correlation, updating, and report generation. The system is capable of departing on an assigned mission, collecting required data, recording which portions of its mission had to be aborted or modified due to environmental constraints, and reporting back when the mission is complete. Successful identification of more than 96% of drum defects has been demonstrated in a high fidelity waste storage facility mockup. Identified anomalies included rust spots, rust streaks, areas of corrosion, dents, and tilted drums. All drums were positively identified and correlated with the site database. This development effort is separated into three phases of which phase two is now complete. The second phase demonstrated a prototype system appropriate for operational use in an actual storage facility. The prototype provides an integrated design that considers operational requirements, hardware costs, maintenance, safety, and robustness. The final phase will demonstrate commercial viability using the prototype vehicle in a pilot waste operations and inspection project. This report summarizes the design and evaluation of the new IMSS Phase 2 system and vehicle. Several parts of the IMSS Phase 1 Topical (Final) Report, which describes the requirements, design guidelines, and detailed design of the Phase 1 IMSS vehicle, are incorporated here, with modifications to reflect the changes in the design and the new elements added during the Phase 2 work.

  5. Is Conscientiousness negatively correlated with intelligence test and inspection time performance

    OpenAIRE

    Todd, Kirsty

    2006-01-01

    The purpose of this study was to ascertain if high C developed as a compensation mechanism to make up for a lack of intelligence: our hypothesis was that C would negatively correlate with intelligence tests’ scores and IT accuracy scores. C was measured along with the other Big 5 factors via a 100 item personality questionnaire: there were 10 items for each factor, except C which had 10 items measuring each of its 6 subfacets, hence 100 items. Intelligence was measured via Rave...

  6. MedRapid--medical community & business intelligence system.

    Science.gov (United States)

    Finkeissen, E; Fuchs, H; Jakob, T; Wetter, T

    2002-01-01

    currently, it takes at least 6 months for researchers to communicate their results. This delay is caused (a) by partial lacks of machine support for both representation as well as communication and (b) by media breaks during the communication process. To make an integrated communication between researchers and practitioners possible, a general structure for medical content representation has been set up. The procedure for data entry and quality management has been generalized and implemented in a web-based authoring system. The MedRapid-system supports the medical experts in entering their knowledge into a database. Here, the level of detail is still below that of current medical guidelines representation. However, the symmetric structure for an area-wide medical knowledge representation is highly retrievable and thus can quickly be communicated into daily routine for the improvement of the treatment quality. In addition, other sources like journal articles and medical guidelines can be references within the MedRapid-system and thus be communicated into daily routine. The fundamental system for the representation of medical reference knowledge (from reference works/books) itself is not sufficient for the friction-less communication amongst medical staff. Rather, the process of (a) representing medical knowledge, (b) refereeing the represented knowledge, (c) communicating the represented knowledge, and (d) retrieving the represented knowledge has to be unified. MedRapid will soon support the whole process on one server system.

  7. Intelligent bidirectional rapidly-exploring random trees for optimal motion planning in complex cluttered environments

    OpenAIRE

    Qureshi, Ahmed Hussain; Ayaz, Yasar

    2017-01-01

    The sampling based motion planning algorithm known as Rapidly-exploring Random Trees (RRT) has gained the attention of many researchers due to their computational efficiency and effectiveness. Recently, a variant of RRT called RRT* has been proposed that ensures asymptotic optimality. Subsequently its bidirectional version has also been introduced in the literature known as Bidirectional-RRT* (B-RRT*). We introduce a new variant called Intelligent Bidirectional-RRT* (IB-RRT*) which is an impr...

  8. The conceptual design of the sensing system for patrolling and inspecting a nuclear facility by the intelligent robot

    Energy Technology Data Exchange (ETDEWEB)

    Ebihara, Ken-ichi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1993-11-01

    Supposing that an intelligent robot, instead of a human worker, patrols and inspects nuclear facilities, it is indispensable for such robot to be capable of moving with avoiding obstacles and recognizing various abnormal conditions, carrying out some ordered works based on information from sensors mounted on the robot. The present robots being practically used in nuclear facilities, however, have the limited capability such as identifying a few specific abnormal conditions using data detected by specific sensors on them. Hence, a conceptual design of a sensor-fusion-based system, which is named `sensing system`, has been performed to collect various kinds of information required for patrol and inspection. This sensing system combines a visual sensor, which consists of a monocular camera and a range finder by the active stereopsis method, an olfactory, acoustic and dose sensors. This report describes the hardware configuration and the software function for processing sensed data. An idea of sensor fusion and the preliminary consideration in respect of applying the neural network to image data processing are also described. (author).

  9. Using artificial intelligence strategies for process-related automated inspection in the production environment

    Science.gov (United States)

    Anding, K.; Kuritcyn, P.; Garten, D.

    2016-11-01

    In this paper a new method for the automatic visual inspection of metallic surfaces is proposed by using Convolutional Neural Networks (CNN). The different combinations of network parameters were developed and tested. The obtained results of CNN were analysed and compared with the results of our previous investigations with color and texture features as input parameters for a Support Vector Machine. Advantages and disadvantages of the different classifying methods are explained.

  10. Intelligent fuzzy-neural pattern generation and control of a quadrupedal bionic inspection robot

    Science.gov (United States)

    Sayfeddine, D.; Bulgakov, A. G.

    2017-02-01

    This paper represents a case study on ‘single leg single step’ pattern generation and control of quadrupedal bionic robot movement using intelligent fuzzy-neural approaches. The aim is to set up a flip-flop mechanical configuration allowing the robot to move one step forward. The same algorithm can be integrated to develop a full trajectory pattern as an interconnected task of global path planning for autonomous quadrupedal robots.

  11. An intelligent ultrasonic inspection system for flooded member detection in offshore structures.

    Science.gov (United States)

    Hayward, G; Pearson, J; Stirling, G

    1993-01-01

    An ultrasonic system for automatic underwater inspection of steel jacket offshore installation is described. It is based on the unambiguous detection of water ingress in normally sealed tubular members, thereby providing an indication of through-wall structural failure. A novel transducer design, based on a dual frequency array of 1-3 connectivity thickness drive transducers, is used to provide the required sensitivity and act also as an environmental monitor for input to an expert system, which performs automatic data analysis. Although intended primarily for operation on a remotely operated vehicle, the system may be employed satisfactorily by a driver. A series of test trials is described, and the prototype is shown to perform very well for all intended modes of operation.

  12. Inspection times, the change task, and the rapid-response selection task.

    Science.gov (United States)

    Roberts, M J; Newton, E J

    2001-11-01

    Three experiments are reported, which are based upon the Wason four-card selection task inspection time paradigm, in which subjects solve computer-presented trials while using a mouse to indicate the card currently under consideration. Evans (1996) had shown that selected cards were inspected for longer than non-selected cards, and this was taken as support for the existence of pre-conscious heuristic processes that direct attention towards relevant aspects of a problem. However, Roberts (1998b) suggested that this inspection time effect is artefactual, due to task format induced biases. Experiment 1 utilized a "change" task: Cards were presented either as selected or not selected, and subjects changed these where necessary. This demonstrated an association between card selection and inspection time independently of one between the act of response and inspection time. Experiment 2 utilized a standard selection task, but subjects either responded within 2 s of each card presentation, or made selections with no time pressure. The curtailment of thinking time increased matching behaviour--more cards matching the terms in the rules were selected--and was replicated in Experiment 3 using a within-subjects design. Overall, the data support Evans' heuristic-analytic framework albeit with some caveats.

  13. Analysis of creep crack growth by intelligent phased array ultrasonic inspection

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, C.S. [Graduate School of Sungkyunkwan Univ., Kyungki (Korea); Lim, B.S. [School of Mechanical Engineering, Sungkyunkwan Univ., Kyungki (Korea)

    2004-07-01

    At high temperatures typical for service conditions in fossil power plants, the creep fracture is dominated by the formation, growth and coalescence of cavities. Using high temperature pipe materials, P92 and P122, the characteristics of creep crack growth were analyzed in this study according to the cavities. The characteristics of cavities play a critical role in creep crack propagation and load line displacement. The effect of the load line displacement rate(dv/dt) and crack growth rate(da/dt) on the da/dt-C{sub t} relation of creep crack growth was evaluated at different temperatures and K{sub i}(initial stress intensity factor) values. The number of cavities increased with increasing temperature and K{sub i}. The crack growth rate and load line displacement rate increased with the increase in the cavity numbers. The kind and distribution of these internal flaws were investigated by an intelligent phased array ultrasonic method and they were utilized in deriving the relationship with the creep crack growth rate, which will predict the creep characteristics of these materials. (orig.)

  14. Technique for rapid at-wavelength inspection of extreme ultraviolet mask blanks

    Energy Technology Data Exchange (ETDEWEB)

    Spector, S. J. [Brookhaven National Laboratory, Upton, New York 11973 (United States); White, D. L. [Bell Laboratories, Lucent Technologies, Murray Hill, New Jersey 07974 (United States); Tennant, D. M. [Bell Laboratories, Lucent Technologies, Holmdel, New Jersey 07733 (United States); Ocola, L. E. [Bell Laboratories, Lucent Technologies, Murray Hill, New Jersey 07974 (United States); Novembre, A. E. [Bell Laboratories, Lucent Technologies, Murray Hill, New Jersey 07974 (United States); Peabody, M. L. [Bell Laboratories, Lucent Technologies, Murray Hill, New Jersey 07974 (United States); Wood, O. R. II [Bell Laboratories, Lucent Technologies, Murray Hill, New Jersey 07974 (United States)

    1999-11-01

    We have developed two new methods for at-wavelength inspection of mask blanks for extreme-ultraviolet (EUV) lithography. In one method an EUV photoresist is applied directly to a mask blank which is then flood exposed with EUV light and partially developed. In the second method, the photoresist is applied to an EUV transparent membrane that is placed in close proximity to the mask and then exposed and developed. Both reflectivity defects and phase defects alter the exposure of the resist, resulting in mounds of resist at defect sites that can then be located by visual inspection. In the direct application method, a higher contrast resist was shown to increase the height of the mounds, thereby improving the sensitivity of the technique. In the membrane method, a holographic technique was used to reconstruct an image of the mask, revealing the presence of very small defects, approximately 0.2 {mu}m in size. The demonstrated clean transfer of phase and amplitude defects to resist features on a membrane will be important when flagging defects in an automatic inspection tool. (c) 1999 American Vacuum Society.

  15. Intelligence.

    Science.gov (United States)

    Sternberg, Robert J

    2012-09-01

    Intelligence is the ability to learn from past experience and, in general, to adapt to, shape, and select environments. Aspects of intelligence are measured by standardized tests of intelligence. Average raw (number-correct) scores on such tests vary across the life span and also across generations, as well as across ethnic and socioeconomic groups. Intelligence can be understood in part in terms of the biology of the brain-especially with regard to the functioning in the prefrontal cortex. Measured values correlate with brain size, at least within humans. The heritability coefficient (ratio of genetic to phenotypic variation) is between 0.4 and 0.8. But genes always express themselves through environment. Heritability varies as a function of a number of factors, including socioeconomic status and range of environments. Racial-group differences in measured intelligence have been reported, but race is a socially constructed rather than biological variable. As a result, these differences are difficult to interpret. Different cultures have different conceptions of the nature of intelligence, and also require different skills in order to express intelligence in the environment. WIREs Cogn Sci 2012 doi: 10.1002/wcs.1193 For further resources related to this article, please visit the WIREs website. Copyright © 2012 John Wiley & Sons, Ltd.

  16. Intelligence

    Science.gov (United States)

    Sternberg, Robert J.

    2012-01-01

    Intelligence is the ability to learn from experience and to adapt to, shape, and select environments. Intelligence as measured by (raw scores on) conventional standardized tests varies across the lifespan, and also across generations. Intelligence can be understood in part in terms of the biology of the brain—especially with regard to the functioning in the prefrontal cortex—and also correlates with brain size, at least within humans. Studies of the effects of genes and environment suggest that the heritability coefficient (ratio of genetic to phenotypic variation) is between .4 and .8, although heritability varies as a function of socioeconomic status and other factors. Racial differences in measured intelligence have been observed, but race is a socially constructed rather than biological variable, so such differences are difficult to interpret. PMID:22577301

  17. Intelligence.

    Science.gov (United States)

    Sternberg, Robert J

    2012-03-01

    Intelligence is the ability to learn from experience and to adapt to, shape, and select environments. Intelligence as measured by (raw scores on) conventional standardized tests varies across the lifespan, and also across generations. Intelligence can be understood in part in terms of the biology of the brain-especially with regard to the functioning in the prefrontal cortex-and also correlates with brain size, at least within humans. Studies of the effects of genes and environment suggest that the heritability coefficient (ratio of genetic to phenotypic variation) is between .4 and .8, although heritability varies as a function of socioeconomic status and other factors. Racial differences in measured intelligence have been observed, but race is a socially constructed rather than biological variable, so such differences are difficult to interpret.

  18. Development of flexural vibration inspection techniques to rapidly assess the structural health of rural bridge systems

    Science.gov (United States)

    Brian K. Brashaw; Robert Vatalaro; Xiping Wang; Kevin Sarvela; James P. Wacker

    2008-01-01

    Approximately 4,000 vehicle bridges in the State of Minnesota contain structural timber members. Recent research at the University of Minnesota Duluth Natural Resources Research Institute (UMD NRRI) has been conducted on vibration testing of timber bridges as a means of developing rapid in-place testing techniques for assessing the structural health of bridges. The...

  19. HCCI Intelligent Rapid Modeling by Artificial Neural Network and Genetic Algorithm

    Directory of Open Access Journals (Sweden)

    AbdoulAhad Validi

    2012-01-01

    Full Text Available A Dynamic model of Homogeneous Charge Compression Ignition (HCCI, based on chemical kinetics principles and artificial intelligence, is developed. The model can rapidly predict the combustion probability, thermochemistry properties, and exact timing of the Start of Combustion (SOC. A realization function is developed on the basis of the Sandia National Laboratory chemical kinetics model, and GRI3.0 methane chemical mechanism. The inlet conditions are optimized by Genetic Algorithm (GA, so that combustion initiates and SOC timing posits in the desired crank angle. The best SOC timing to achieve higher performance and efficiency in HCCI engines is between 5 and 15 degrees crank angle (CAD after top dead center (TDC. To achieve this SOC timing, in the first case, the inlet temperature and equivalence ratio are optimized simultaneously and in the second case, compression ratio is optimized by GA. The model’s results are validated with previous works. The SOC timing can be predicted in less than 0.01 second and the CPU time savings are encouraging. This model can successfully be used for real engine control applications.

  20. Rapid and accurate intraoperative pathological diagnosis by artificial intelligence with deep learning technology.

    Science.gov (United States)

    Zhang, Jing; Song, Yanlin; Xia, Fan; Zhu, Chenjing; Zhang, Yingying; Song, Wenpeng; Xu, Jianguo; Ma, Xuelei

    2017-09-01

    Frozen section is widely used for intraoperative pathological diagnosis (IOPD), which is essential for intraoperative decision making. However, frozen section suffers from some drawbacks, such as time consuming and high misdiagnosis rate. Recently, artificial intelligence (AI) with deep learning technology has shown bright future in medicine. We hypothesize that AI with deep learning technology could help IOPD, with a computer trained by a dataset of intraoperative lesion images. Evidences supporting our hypothesis included the successful use of AI with deep learning technology in diagnosing skin cancer, and the developed method of deep-learning algorithm. Large size of the training dataset is critical to increase the diagnostic accuracy. The performance of the trained machine could be tested by new images before clinical use. Real-time diagnosis, easy to use and potential high accuracy were the advantages of AI for IOPD. In sum, AI with deep learning technology is a promising method to help rapid and accurate IOPD. Copyright © 2017 Elsevier Ltd. All rights reserved.

  1. Electromagnetic methods for measuring materials properties of cylindrical rods and array probes for rapid flaw inspection

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Haiyan [Iowa State Univ., Ames, IA (United States)

    2005-01-01

    field in the presence of a finite a two-layer rod and a conductive tube. The results are in very good agreement with those obtained by using a 2D finite element code. In the third part, a new probe technology with enhanced flaw detection capability is described. The new probe can reduce inspection time through the use of multiple Hall sensors. A prototype Hall array probe has been built and tested with eight individual Hall sensor ICs and a racetrack coil. Electronic hardware was developed to interface the probes to an oscilloscope or an eddy current instrument. To achieve high spatial resolution and to limit the overall probe size, high-sensitivity Hall sensor arrays were fabricated directly on a wafer using photolithographic techniques and then mounted in their unencapsulated form. The electronic hardware was then updated to interface the new probes to a laptop computer.

  2. Rapid simulation of X-ray transmission imaging for baggage inspection via GPU-based ray-tracing

    Science.gov (United States)

    Gong, Qian; Stoian, Razvan-Ionut; Coccarelli, David S.; Greenberg, Joel A.; Vera, Esteban; Gehm, Michael E.

    2018-01-01

    We present a pipeline that rapidly simulates X-ray transmission imaging for arbitrary system architectures using GPU-based ray-tracing techniques. The purpose of the pipeline is to enable statistical analysis of threat detection in the context of airline baggage inspection. As a faster alternative to Monte Carlo methods, we adopt a deterministic approach for simulating photoelectric absorption-based imaging. The highly-optimized NVIDIA OptiX API is used to implement ray-tracing, greatly speeding code execution. In addition, we implement the first hierarchical representation structure to determine the interaction path length of rays traversing heterogeneous media described by layered polygons. The accuracy of the pipeline has been validated by comparing simulated data with experimental data collected using a heterogenous phantom and a laboratory X-ray imaging system. On a single computer, our approach allows us to generate over 400 2D transmission projections (125 × 125 pixels per frame) per hour for a bag packed with hundreds of everyday objects. By implementing our approach on cloud-based GPU computing platforms, we find that the same 2D projections of approximately 3.9 million bags can be obtained in a single day using 400 GPU instances, at a cost of only 0.001 per bag.

  3. Intelligent Monitoring? Assessing the ability of the Care Quality Commission's statistical surveillance tool to predict quality and prioritise NHS hospital inspections.

    Science.gov (United States)

    Griffiths, Alex; Beaussier, Anne-Laure; Demeritt, David; Rothstein, Henry

    2017-02-01

    The Care Quality Commission (CQC) is responsible for ensuring the quality of the health and social care delivered by more than 30 000 registered providers in England. With only limited resources for conducting on-site inspections, the CQC has used statistical surveillance tools to help it identify which providers it should prioritise for inspection. In the face of planned funding cuts, the CQC plans to put more reliance on statistical surveillance tools to assess risks to quality and prioritise inspections accordingly. To evaluate the ability of the CQC's latest surveillance tool, Intelligent Monitoring (IM), to predict the quality of care provided by National Health Service (NHS) hospital trusts so that those at greatest risk of providing poor-quality care can be identified and targeted for inspection. The predictive ability of the IM tool is evaluated through regression analyses and χ2 testing of the relationship between the quantitative risk score generated by the IM tool and the subsequent quality rating awarded following detailed on-site inspection by large expert teams of inspectors. First, the continuous risk scores generated by the CQC's IM statistical surveillance tool cannot predict inspection-based quality ratings of NHS hospital trusts (OR 0.38 (0.14 to 1.05) for Outstanding/Good, OR 0.94 (0.80 to -1.10) for Good/Requires improvement, and OR 0.90 (0.76 to 1.07) for Requires improvement/Inadequate). Second, the risk scores cannot be used more simply to distinguish the trusts performing poorly-those subsequently rated either 'Requires improvement' or 'Inadequate'-from the trusts performing well-those subsequently rated either 'Good' or 'Outstanding' (OR 1.07 (0.91 to 1.26)). Classifying CQC's risk bandings 1-3 as high risk and 4-6 as low risk, 11 of the high risk trusts were performing well and 43 of the low risk trusts were performing poorly, resulting in an overall accuracy rate of 47.6%. Third, the risk scores cannot be used even more simply to

  4. Tridimensional ultrasonic images analysis for the in service inspection of fast breeder reactors; Analyse d'images tridimensionnelles ultrasonores pour l'inspection en service des reacteurs a neutrons rapides

    Energy Technology Data Exchange (ETDEWEB)

    Dancre, M

    1999-11-01

    Tridimensional image analysis provides a set of methods for the intelligent extraction of information in order to visualize, recognize or inspect objects in volumetric images. In this field of research, we are interested in algorithmic and methodological aspects to extract surface visual information embedded in volume ultrasonic images. The aim is to help a non-acoustician operator, possibly the system itself, to inspect surfaces of vessel and internals in Fast Breeder Reactors (FBR). Those surfaces are immersed in liquid metal, what justifies the ultrasonic technology choice. We expose firstly a state of the art on the visualization of volume ultrasonic images, the methods of noise analysis, the geometrical modelling for surface analysis and finally curves and surfaces matching. These four points are then inserted in a global analysis strategy that relies on an acoustical analysis (echoes recognition), an object analysis (object recognition and reconstruction) and a surface analysis (surface defects detection). Few literature can be found on ultrasonic echoes recognition through image analysis. We suggest an original method that can be generalized to all images with structured and non-structured noise. From a technical point of view, this methodology applied to echoes recognition turns out to be a cooperative approach between morphological mathematics and snakes (active contours). An entropy maximization technique is required for volumetric data binarization. (author)

  5. Homes for robots: A rapid prototyping toolkit for robotics and intelligent environments

    OpenAIRE

    Triquell Conde, Oriol

    2011-01-01

    Projecte final de carrera fet en col.laboració amb Technische Universität München English: Intelligent Environments (IEs) have much in common with Robotics. A great number of distributed, heterogeneous sensors, actuators, and processing components exchange data and communicate and thereby form an ecology of information processing systems. The complexity of the individual components and subsystems demands for a simulation environment that allows us to selectively investigate the characteris...

  6. Utility and potential of rapid epidemic intelligence from internet-based sources

    Directory of Open Access Journals (Sweden)

    S.J. Yan

    2017-10-01

    Conclusion: The proliferation of publicly available information on the Internet provided a new avenue for epidemic intelligence. Methodologies have been developed to collect Internet data and some systems are already used to enhance the timeliness of traditional surveillance systems. To improve the utility of Internet-based systems, the key attributes of timeliness and data accuracy should be included in future evaluations of surveillance systems.

  7. Experimental comparison between speech transmission index, rapid speech transmission index, and speech intelligibility index.

    Science.gov (United States)

    Larm, Petra; Hongisto, Valtteri

    2006-02-01

    During the acoustical design of, e.g., auditoria or open-plan offices, it is important to know how speech can be perceived in various parts of the room. Different objective methods have been developed to measure and predict speech intelligibility, and these have been extensively used in various spaces. In this study, two such methods were compared, the speech transmission index (STI) and the speech intelligibility index (SII). Also the simplification of the STI, the room acoustics speech transmission index (RASTI), was considered. These quantities are all based on determining an apparent speech-to-noise ratio on selected frequency bands and summing them using a specific weighting. For comparison, some data were needed on the possible differences of these methods resulting from the calculation scheme and also measuring equipment. Their prediction accuracy was also of interest. Measurements were made in a laboratory having adjustable noise level and absorption, and in a real auditorium. It was found that the measurement equipment, especially the selection of the loudspeaker, can greatly affect the accuracy of the results. The prediction accuracy of the RASTI was found acceptable, if the input values for the prediction are accurately known, even though the studied space was not ideally diffuse.

  8. PNA FISH: an intelligent stain for rapid diagnosis of infectious diseases.

    Science.gov (United States)

    Stender, Henrik

    2003-09-01

    Fluorescence in situ hybridization using peptide nucleic acid probes (PNA FISH) is a novel diagnostic technique combining the simplicity of traditional staining procedures with the unique performance of PNA probes to provide rapid and accurate diagnosis of infectious diseases; a feature that makes PNA FISH well suited for routine application and enables clinical microbiology laboratories to report important information for patient therapy within a time frame not possible using classic biochemical methods. Having transitioned from an academic curiosity into an advanced diagnostic tool, PNA probes are now debuting on the infectious disease stage, representing the new generation of therapy-directing diagnostics.

  9. EUREKA EU 191 - an inspection toolkit for an advanced ROV

    Energy Technology Data Exchange (ETDEWEB)

    Smith, B.J. (AEA Petroleum Services, Harwell (United Kingdom)); Wedgwood, F.A.; Siva, K.

    1992-01-01

    This paper is concerned specifically with a Work and Inspection Robot (WIR) which is an intelligent ROV intended to carry out remote inspection, maintenance and repair of underwater structures. (author).

  10. Intelligent playgrounds

    DEFF Research Database (Denmark)

    Larsen, Lasse Juel

    2009-01-01

    This paper examines play, gaming and learning in regard to intelligent playware developed for outdoor use. The key questions are how does these novel artefacts influence the concept of play, gaming and learning. Up until now play and game have been understood as different activities. This paper...... examines if the sharp differentiation between the two can be uphold in regard to intelligent playware for outdoor use. Play and game activities will be analysed and viewed in conjunction with learning contexts. This paper will stipulate that intelligent playware facilitates rapid shifts in contexts...

  11. Inspection Database

    Data.gov (United States)

    U.S. Department of Health & Human Services — FDA is disclosing the final inspection classification for inspections related to currently marketed FDA-regulated products. The disclosure of this information is not...

  12. THE JOHNS HOPKINS PERCEPTUAL TEST, THE DEVELOPMENT OF A RAPID INTELLIGENCE TEST FOR THE PRE-SCHOOL CHILD.

    Science.gov (United States)

    ROSENBERG, LEON A.; AND OTHERS

    IN ORDER TO DEVELOP AN INTELLIGENCE TEST FOR PRESCHOOL-AGE CHILDREN THAT WOULD OVERCOME SOME OF THE LIMITATIONS OF AVAILABLE TESTS, A PERCEPTUAL DISCRIMINATION TEST USING POLYGONAL FORMS HAS BEEN DESIGNED AND TESTED. THE CHILD POINTS TO ONE OF TWO, THREE, OR FIVE FORMS MATCHING A STIMULUS FORM. INITIAL TESTING WITH 44 CHILDREN RANGING IN AGE FROM…

  13. Fetal Intelligent Navigation Echocardiography (FINE): a novel method for rapid, simple, and automatic examination of the fetal heart.

    Science.gov (United States)

    Yeo, Lami; Romero, Roberto

    2013-09-01

    To describe a novel method (Fetal Intelligent Navigation Echocardiography (FINE)) for visualization of standard fetal echocardiography views from volume datasets obtained with spatiotemporal image correlation (STIC) and application of 'intelligent navigation' technology. We developed a method to: 1) demonstrate nine cardiac diagnostic planes; and 2) spontaneously navigate the anatomy surrounding each of the nine cardiac diagnostic planes (Virtual Intelligent Sonographer Assistance (VIS-Assistance®)). The method consists of marking seven anatomical structures of the fetal heart. The following echocardiography views are then automatically generated: 1) four chamber; 2) five chamber; 3) left ventricular outflow tract; 4) short-axis view of great vessels/right ventricular outflow tract; 5) three vessels and trachea; 6) abdomen/stomach; 7) ductal arch; 8) aortic arch; and 9) superior and inferior vena cava. The FINE method was tested in a separate set of 50 STIC volumes of normal hearts (18.6-37.2 weeks of gestation), and visualization rates for fetal echocardiography views using diagnostic planes and/or VIS-Assistance® were calculated. To examine the feasibility of identifying abnormal cardiac anatomy, we tested the method in four cases with proven congenital heart defects (coarctation of aorta, tetralogy of Fallot, transposition of great vessels and pulmonary atresia with intact ventricular septum). In normal cases, the FINE method was able to generate nine fetal echocardiography views using: 1) diagnostic planes in 78-100% of cases; 2) VIS-Assistance® in 98-100% of cases; and 3) a combination of diagnostic planes and/or VIS-Assistance® in 98-100% of cases. In all four abnormal cases, the FINE method demonstrated evidence of abnormal fetal cardiac anatomy. The FINE method can be used to visualize nine standard fetal echocardiography views in normal hearts by applying 'intelligent navigation' technology to STIC volume datasets. This method can simplify

  14. Hospital Inspections

    Data.gov (United States)

    U.S. Department of Health & Human Services — Welcome to hospitalinspections.org, a website run by the Association of Health Care Journalists (AHCJ) that aims to make federal hospital inspection reports easier...

  15. The emergence of intelligence

    OpenAIRE

    Calvin, William H

    1994-01-01

    Language, foresight, musical skills and other hallmarks of intelligence are connected through an underlying facility that enhances rapid movements. Creativity may result from a Darwinian contest within the brain.

  16. Customs Inspection

    Science.gov (United States)

    1977-05-01

    toilet known or suspected not to be entitled to duty-free articles), entry is found in a member’s accompanied *R. No more than 50 cigars or 200 ciga...responsibility of the oper. junction with or following, required mortuary ator of the air or ocean terminal having juris- inspections. Examination, to include

  17. Acceptability of an intelligent wireless sensor system for the rapid detection of health issues: findings among home-dwelling older adults and their informal caregivers.

    Science.gov (United States)

    Cohen, Christine; Kampel, Thomas; Verloo, Henk

    2016-01-01

    Aging at home rather than in an institution is now considered the gold standard. Public health figures document an important demographic transition to an increasingly elderly society. At the same time, this is accompanied by the emergence of significant numbers of innovative technologies to help and support home-dwelling older adults in declining health who wish to remain at home. To explore the acceptability of intelligent wireless sensor system (IWSS) among home-dwelling older adults in rapidly detecting their health issues. Data were sourced from a pilot 3-month randomized clinical trial that involved 34 older patients in the experimental group (EG) using an IWSS to rapidly detect falls and other health issues at home. The effectiveness of the IWSS was assessed by comparing it to participants' functional and cognitive status, as measured both before and after the trial. The Resident Assessment Instrument for Home Care, Confusion Assessment Method, Cognitive Performance Scale, Geriatric Depression Scale, and Informed Questionnaire on Cognitive Decline in the Elderly were used for the assessments. Acceptability of the IWSS was explored at the end of the study. Both older adults and their informal caregivers considered the performance and usefulness of the IWSS intervention to be low to moderate. A majority of the participants were unsatisfied with its ease of use and found multiple obstacles in using and having an intention to use the IWSS. However, their informal caregivers were more satisfied with the program and gave higher scores for usefulness, ease of use, and intention to use IWSS technology. The IWSS displayed low-to-moderate acceptability among the older participants and their informal caregivers. We recommend improving and clarifying several components in the IWSS for the development of a design that is user-centered.

  18. Acceptability Among Community Healthcare Nurses of Intelligent Wireless Sensor-system Technology for the Rapid Detection of Health Issues in Home-dwelling Older Adults.

    Science.gov (United States)

    Cohen, Christine; Kampel, Thomas; Verloo, Henk

    2017-01-01

    The effective care and support of community healthcare nurses (CHNs) contribute greatly to the healthy aging of older adults living at home. Integrating innovative technologies into CHNs' daily practice offers new opportunities and perspectives for early detection of health issues and interventions among home-dwelling older adults. To explore the perception of acceptability among CHNs of an intelligent wireless sensor system (IWSS) for use in daily practice for the detection of health issues in home-dwelling older adults receiving home healthcare. Descriptive and qualitative data were sourced from a pilot randomized controlled trial involving 17 CHNs using an IWSS in their daily practice to rapidly detect falls and other health issues in patients' homes. IWSS alerts indicating behavior changes were sent to CHNs. Their perceived usefulness (PU) and perceived ease of use (PEOU) were assessed. The acceptability of IWSS technology was explored using a questionnaire and focus group discussions. The PU and PEOU of the IWSS technology were low to moderate. A majority of the CHNs were dissatisfied with its performance and intrusiveness; they reported multiple obstacles in the usefulness and ease of use of the IWSS technology in daily practice. To improve the IWSS technology's low to moderate acceptability among CHNs, we recommend a more user-centered implementation strategy and an embedded model of nursing care.

  19. Rapid evaporative ionisation mass spectrometry of electrosurgical vapours for the identification of breast pathology: towards an intelligent knife for breast cancer surgery.

    Science.gov (United States)

    St John, Edward R; Balog, Julia; McKenzie, James S; Rossi, Merja; Covington, April; Muirhead, Laura; Bodai, Zsolt; Rosini, Francesca; Speller, Abigail V M; Shousha, Sami; Ramakrishnan, Rathi; Darzi, Ara; Takats, Zoltan; Leff, Daniel R

    2017-05-23

    Re-operation for positive resection margins following breast-conserving surgery occurs frequently (average = 20-25%), is cost-inefficient, and leads to physical and psychological morbidity. Current margin assessment techniques are slow and labour intensive. Rapid evaporative ionisation mass spectrometry (REIMS) rapidly identifies dissected tissues by determination of tissue structural lipid profiles through on-line chemical analysis of electrosurgical aerosol toward real-time margin assessment. Electrosurgical aerosol produced from ex-vivo and in-vivo breast samples was aspirated into a mass spectrometer (MS) using a monopolar hand-piece. Tissue identification results obtained by multivariate statistical analysis of MS data were validated by histopathology. Ex-vivo classification models were constructed from a mass spectral database of normal and tumour breast samples. Univariate and tandem MS analysis of significant peaks was conducted to identify biochemical differences between normal and cancerous tissues. An ex-vivo classification model was used in combination with bespoke recognition software, as an intelligent knife (iKnife), to predict the diagnosis for an ex-vivo validation set. Intraoperative REIMS data were acquired during breast surgery and time-synchronized to operative videos. A classification model using histologically validated spectral data acquired from 932 sampling points in normal tissue and 226 in tumour tissue provided 93.4% sensitivity and 94.9% specificity. Tandem MS identified 63 phospholipids and 6 triglyceride species responsible for 24 spectral differences between tissue types. iKnife recognition accuracy with 260 newly acquired fresh and frozen breast tissue specimens (normal n = 161, tumour n = 99) provided sensitivity of 90.9% and specificity of 98.8%. The ex-vivo and intra-operative method produced visually comparable high intensity spectra. iKnife interpretation of intra-operative electrosurgical vapours, including data

  20. Acceptability of an intelligent wireless sensor system for the rapid detection of health issues: findings among home-dwelling older adults and their informal caregivers

    Directory of Open Access Journals (Sweden)

    Cohen C

    2016-09-01

    Full Text Available Christine Cohen, Thomas Kampel, Henk Verloo Department Ra&D, La Source School of Nursing Sciences, University of Applied Sciences and Arts Western Switzerland, Lausanne, Switzerland Background: Aging at home rather than in an institution is now considered the gold standard. Public health figures document an important demographic transition to an increasingly elderly society. At the same time, this is accompanied by the emergence of significant numbers of innovative technologies to help and support home-dwelling older adults in declining health who wish to remain at home.Study aim: To explore the acceptability of intelligent wireless sensor system (IWSS among home-dwelling older adults in rapidly detecting their health issues.Methods: Data were sourced from a pilot 3-month randomized clinical trial that involved 34 older patients in the experimental group (EG using an IWSS to rapidly detect falls and other health issues at home. The effectiveness of the IWSS was assessed by comparing it to participants’ functional and cognitive status, as measured both before and after the trial. The Resident Assessment Instrument for Home Care, Confusion Assessment Method, Cognitive Performance Scale, Geriatric Depression Scale, and Informed Questionnaire on Cognitive Decline in the Elderly were used for the assessments. Acceptability of the IWSS was explored at the end of the study.Results: Both older adults and their informal caregivers considered the performance and usefulness of the IWSS intervention to be low to moderate. A majority of the participants were unsatisfied with its ease of use and found multiple obstacles in using and having an intention to use the IWSS. However, their informal caregivers were more satisfied with the program and gave higher scores for usefulness, ease of use, and intention to use IWSS technology.Conclusion: The IWSS displayed low-to-moderate acceptability among the older participants and their informal caregivers. We

  1. Rapid, non-destructive and non-contact inspection of solid foods by means of photothermal radiometry; thermal effusivity and initial heating coefficient

    Science.gov (United States)

    Gijsbertsen, A.; Bicanic, D.; Gielen, J. L. W.; Chirtoc, M.

    2004-03-01

    CO 2-laser photothermal radiometry (PTR) was demonstrated to be suitable for the non-destructive and non-contact characterization (both optical and thermal) of solid phase agricultural commodities (fresh vegetables, fruits) and confectionery products (candy). Proper interpretation of PTR signals enable one to calculate two parameters, i.e. the well known thermal effusivity e ( e= λρc p, where λ and ρcp are the thermal conductivity and the volume specific heat, respectively) and a newly introduced physical quantity termed 'initial heating coefficient' chi ( χ= β/( ρcp), β is the absorption coefficient). Obtained values for e are in a good agreement with data reported in the literature. PTR enables one to rapidly determine e via a single measurement. As opposed to this, the knowledge of two out of three thermophysical parameters (thermal diffusivity, thermal conductivity and volume specific heat) is a condition sine qua non for determining effusivity in the conventional manner.

  2. Artificial intelligence

    CERN Document Server

    Hunt, Earl B

    1975-01-01

    Artificial Intelligence provides information pertinent to the fundamental aspects of artificial intelligence. This book presents the basic mathematical and computational approaches to problems in the artificial intelligence field.Organized into four parts encompassing 16 chapters, this book begins with an overview of the various fields of artificial intelligence. This text then attempts to connect artificial intelligence problems to some of the notions of computability and abstract computing devices. Other chapters consider the general notion of computability, with focus on the interaction bet

  3. Inspection Methods in Programming: Cliches and Plans.

    Science.gov (United States)

    1987-12-01

    PROGRAM ELEMENT. PROJECT. TASK Artificial Inteligence Laboratory AREA & WORK UN IT NUMBERS J 545 Technology Square Cambridge, MA 02139 $L. CONTROLLING...U) MASSACHUSETTS INST OF TECH CAMBRIDGE ARTIFICIAL INTELLIGENCE LAB C RICH DEC 87 AI-M-±05 UNCLASSIFIED NW014-B5-K-0124 F/G 12/5 NL ’lllll l l l...S %P W. J % % %s MASSACHUSETTS INSTITUTE OF TECHNOLOGY N ARTIFICIAL INTELLIGENCE LABORATORY 00 A.I. Memo No. 1005 December 1987 N Inspection Methods

  4. Additive Manufacturing Infrared Inspection

    Science.gov (United States)

    Gaddy, Darrell; Nettles, Mindy

    2015-01-01

    The Additive Manufacturing Infrared Inspection Task started the development of a real-time dimensional inspection technique and digital quality record for the additive manufacturing process using infrared camera imaging and processing techniques. This project will benefit additive manufacturing by providing real-time inspection of internal geometry that is not currently possible and reduce the time and cost of additive manufactured parts with automated real-time dimensional inspections which deletes post-production inspections.

  5. Competitive Intelligence.

    Science.gov (United States)

    Bergeron, Pierrette; Hiller, Christine A.

    2002-01-01

    Reviews the evolution of competitive intelligence since 1994, including terminology and definitions and analytical techniques. Addresses the issue of ethics; explores how information technology supports the competitive intelligence process; and discusses education and training opportunities for competitive intelligence, including core competencies…

  6. Competitive Intelligence in small and medium enterprises

    OpenAIRE

    Soukup, Tomáš

    2011-01-01

    This thesis concentrates on Competitive Intelligence which is not well known in the Czech region. On the other hand, it has been a rapidly increasing discipline. The main aim of this thesis is to suggest how to use the methods of Competitive Intelligence in small and medium-sized companies. The theoretical part summarises the terminology of Competitive Intelligence. At first the strategic management is being defined, as it is the basis of practical usage of the Competitive Intelligence method...

  7. Efficacy in Teaching through "Multiple Intelligence" Instructional Strategies

    Science.gov (United States)

    Tamilselvi, B.; Geetha, D.

    2015-01-01

    Multiple intelligence is the theory that "people are smart in more ways than one has immense implication for educators". Howard Gardner proposed a new view of intelligence that is rapidly being incorporated in school curricula. In his theory of Multiple Intelligences, Gardner expanded the concept of intelligence with such areas as music,…

  8. Intelligence Ethics:

    DEFF Research Database (Denmark)

    Rønn, Kira Vrist

    2016-01-01

    Questions concerning what constitutes a morally justified conduct of intelligence activities have received increased attention in recent decades. However, intelligence ethics is not yet homogeneous or embedded as a solid research field. The aim of this article is to sketch the state of the art...... of intelligence ethics and point out subjects for further scrutiny in future research. The review clusters the literature on intelligence ethics into two groups: respectively, contributions on external topics (i.e., the accountability of and the public trust in intelligence agencies) and internal topics (i.......e., the search for an ideal ethical framework for intelligence actions). The article concludes that there are many holes to fill for future studies on intelligence ethics both in external and internal discussions. Thus, the article is an invitation – especially, to moral philosophers and political theorists...

  9. Improvement of the reliability on nondestructive inspection

    Energy Technology Data Exchange (ETDEWEB)

    Song, Sung Jin; Kim, Young H. [Sungkyunkwan Univ., Suwon (Korea, Republic of); Lee, Hyang Beom [Soongsil Univ., Seoul (Korea, Republic of); Shin, Young Kil [Kunsan National Univ., Gunsan (Korea, Republic of); Jung, Hyun Jo [Wonkwang Univ., Iksan (Korea, Republic of); Park, Ik Keun; Park, Eun Soo [Seoul Nationl Univ., Seoul (Korea, Republic of)

    2002-03-15

    Retaining reliabilities of nondestructive testing is essential for the life-time maintenance of Nuclear Power Plant. The nondestructive testing methods which are frequently used in the Nuclear Power Plant are eddy current testing for the inspection of steam generator tubes and ultrasonic testing for the inspection of weldments. In order to improve reliabilities of ultrasonic testing and eddy current testing, the subjects carried out in this study are as follows : development of BEM analysis technique for ECT of SG tube, development of neural network technique for the intelligent analysis of ECT flaw signals of SG tubes, development of RFECT technology for the inspection of SG tube, FEM analysis of ultrasonic scattering field, evaluation of statistical reliability of PD-RR test of ultrasonic testing and development of multi-Gaussian beam modeling technique to predict accurate signal of signal beam ultrasonic testing with the efficiency in calculation time.

  10. Aspects of Inspection Planning

    DEFF Research Database (Denmark)

    Faber, M. H.; Sørensen, John Dalsgaard

    2000-01-01

    Inspection planning for systems is considered with special emphasis to the effect of the quality of inspections on the system reliability and the probability of repair. Inspection quality is described and discussed in terms of inspection reliability and inspection coverage where the latter is set...... in relation to the correlation between the failure modes of the considered system. The inspection planning problem is described in general terms taking basis in the Bayesian decision theory. Practical applicable approaches are derived from the more general but also more involving formulations. The theoretical...... framework for updating of the reliability of components and systems on the basis of inspection results is outlined. Systems representative for inspection planning of different engineering systems subjected to typical deterioration processes are presented. Numerical simulation studies are performed...

  11. Artificial Intelligence,

    Science.gov (United States)

    PATTERN RECOGNITION, * ARTIFICIAL INTELLIGENCE, *TEXTBOOKS, COMPUTER PROGRAMMING, MATHEMATICAL LOGIC, ROBOTS, PROBLEM SOLVING, STATISTICAL ANALYSIS, GAME THEORY, NATURAL LANGUAGE, SELF ORGANIZING SYSTEMS.

  12. An Intelligent Tutor for Intrusion Detection on Computer Systems.

    Science.gov (United States)

    Rowe, Neil C.; Schiavo, Sandra

    1998-01-01

    Describes an intelligent tutor incorporating a program using artificial-intelligence planning methods to generate realistic audit files reporting actions of simulated users and intruders of a UNIX system, and a program simulating the system afterwards that asks students to inspect the audit and fix problems. Experiments show that students using…

  13. Intelligent instrumentation principles and applications

    CERN Document Server

    Bhuyan, Manabendra

    2011-01-01

    With the advent of microprocessors and digital-processing technologies as catalyst, classical sensors capable of simple signal conditioning operations have evolved rapidly to take on higher and more specialized functions including validation, compensation, and classification. This new category of sensor expands the scope of incorporating intelligence into instrumentation systems, yet with such rapid changes, there has developed no universal standard for design, definition, or requirement with which to unify intelligent instrumentation. Explaining the underlying design methodologies of intelligent instrumentation, Intelligent Instrumentation: Principles and Applications provides a comprehensive and authoritative resource on the scientific foundations from which to coordinate and advance the field. Employing a textbook-like language, this book translates methodologies to more than 80 numerical examples, and provides applications in 14 case studies for a complete and working understanding of the material. Beginn...

  14. Intelligent Design

    DEFF Research Database (Denmark)

    Hjorth, Poul G.

    2005-01-01

    Forestillingen om at naturen er designet af en guddommelig 'intelligens' er et smukt filosofisk princip. Teorier om Intelligent Design som en naturvidenskabeligt baseret teori er derimod helt forfærdelig.......Forestillingen om at naturen er designet af en guddommelig 'intelligens' er et smukt filosofisk princip. Teorier om Intelligent Design som en naturvidenskabeligt baseret teori er derimod helt forfærdelig....

  15. Illusory Intelligences?

    Science.gov (United States)

    White, John

    2008-01-01

    Howard Gardner's theory of Multiple Intelligences has had a huge influence on school education. But its credentials lack justification, as the first section of this paper shows via a detailed philosophical analysis of how the intelligences are identified. If we want to make sense of the theory, we need to turn from a philosophical to a historical…

  16. Intelligent Extruder

    Energy Technology Data Exchange (ETDEWEB)

    AlperEker; Mark Giammattia; Paul Houpt; Aditya Kumar; Oscar Montero; Minesh Shah; Norberto Silvi; Timothy Cribbs

    2003-04-24

    ''Intelligent Extruder'' described in this report is a software system and associated support services for monitoring and control of compounding extruders to improve material quality, reduce waste and energy use, with minimal addition of new sensors or changes to the factory floor system components. Emphasis is on process improvements to the mixing, melting and de-volatilization of base resins, fillers, pigments, fire retardants and other additives in the :finishing'' stage of high value added engineering polymer materials. While GE Plastics materials were used for experimental studies throughout the program, the concepts and principles are broadly applicable to other manufacturers materials. The project involved a joint collaboration among GE Global Research, GE Industrial Systems and Coperion Werner & Pleiderer, USA, a major manufacturer of compounding equipment. Scope of the program included development of a algorithms for monitoring process material viscosity without rheological sensors or generating waste streams, a novel detection scheme for rapid detection of process upsets and an adaptive feedback control system to compensate for process upsets where at line adjustments are feasible. Software algorithms were implemented and tested on a laboratory scale extruder (50 lb/hr) at GE Global Research and data from a production scale system (2000 lb/hr) at GE Plastics was used to validate the monitoring and detection software. Although not evaluated experimentally, a new concept for extruder process monitoring through estimation of high frequency drive torque without strain gauges is developed and demonstrated in simulation. A plan to commercialize the software system is outlined, but commercialization has not been completed.

  17. Artificial intelligence

    CERN Document Server

    Ennals, J R

    1987-01-01

    Artificial Intelligence: State of the Art Report is a two-part report consisting of the invited papers and the analysis. The editor first gives an introduction to the invited papers before presenting each paper and the analysis, and then concludes with the list of references related to the study. The invited papers explore the various aspects of artificial intelligence. The analysis part assesses the major advances in artificial intelligence and provides a balanced analysis of the state of the art in this field. The Bibliography compiles the most important published material on the subject of

  18. Integrated flexible manufacturing program for manufacturing automation and rapid prototyping

    Science.gov (United States)

    Brooks, S. L.; Brown, C. W.; King, M. S.; Simons, W. R.; Zimmerman, J. J.

    1993-01-01

    The Kansas City Division of Allied Signal Inc., as part of the Integrated Flexible Manufacturing Program (IFMP), is developing an integrated manufacturing environment. Several systems are being developed to produce standards and automation tools for specific activities within the manufacturing environment. The Advanced Manufacturing Development System (AMDS) is concentrating on information standards (STEP) and product data transfer; the Expert Cut Planner system (XCUT) is concentrating on machining operation process planning standards and automation capabilities; the Advanced Numerical Control system (ANC) is concentrating on NC data preparation standards and NC data generation tools; the Inspection Planning and Programming Expert system (IPPEX) is concentrating on inspection process planning, coordinate measuring machine (CMM) inspection standards and CMM part program generation tools; and the Intelligent Scheduling and Planning System (ISAPS) is concentrating on planning and scheduling tools for a flexible manufacturing system environment. All of these projects are working together to address information exchange, standardization, and information sharing to support rapid prototyping in a Flexible Manufacturing System (FMS) environment.

  19. Vision Based Autonomous Robotic Control for Advanced Inspection and Repair

    Science.gov (United States)

    Wehner, Walter S.

    2014-01-01

    The advanced inspection system is an autonomous control and analysis system that improves the inspection and remediation operations for ground and surface systems. It uses optical imaging technology with intelligent computer vision algorithms to analyze physical features of the real-world environment to make decisions and learn from experience. The advanced inspection system plans to control a robotic manipulator arm, an unmanned ground vehicle and cameras remotely, automatically and autonomously. There are many computer vision, image processing and machine learning techniques available as open source for using vision as a sensory feedback in decision-making and autonomous robotic movement. My responsibilities for the advanced inspection system are to create a software architecture that integrates and provides a framework for all the different subsystem components; identify open-source algorithms and techniques; and integrate robot hardware.

  20. How Intelligent is your Intelligent Robot?

    OpenAIRE

    Winfield, Alan F. T.

    2017-01-01

    How intelligent is robot A compared with robot B? And how intelligent are robots A and B compared with animals (or plants) X and Y? These are both interesting and deeply challenging questions. In this paper we address the question "how intelligent is your intelligent robot?" by proposing that embodied intelligence emerges from the interaction and integration of four different and distinct kinds of intelligence. We then suggest a simple diagrammatic representation on which these kinds of intel...

  1. Automated PCB Inspection System

    Directory of Open Access Journals (Sweden)

    Syed Usama BUKHARI

    2017-05-01

    Full Text Available Development of an automated PCB inspection system as per the need of industry is a challenging task. In this paper a case study is presented, to exhibit, a proposed system for an immigration process of a manual PCB inspection system to an automated PCB inspection system, with a minimal intervention on the existing production flow, for a leading automotive manufacturing company. A detailed design of the system, based on computer vision followed by testing and analysis was proposed, in order to aid the manufacturer in the process of automation.

  2. Runway Inspection by RPAS

    Directory of Open Access Journals (Sweden)

    Stanislav Absolon

    2015-10-01

    Full Text Available This article discusses the use of the RPAS for the inspection of the airport operating areas. The paper compares the current process of the inspection of the airport operating areas by the airport staff with the possibilities which are offered by the use of the modern technology RPAS. The following text also describes how to inspect airport operating areas by the RPAS, specific technical possibilities and the applicable technical solutions. Furthermore there are variants of piloting the RPAS, comparing usable equipment, equipment for video recording and the possibility of using thermal imaging camera in the article.

  3. Signal Station Inspection Reports

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Handwritten reports resulting from detailed inspections of US Army Signal Service Stations, 1871-1889. Features reported included instrument exposure and condition,...

  4. Wheel inspection system environment.

    Science.gov (United States)

    2008-11-18

    International Electronic Machines Corporation (IEM) has developed and is now marketing a state-of-the-art Wheel Inspection System Environment (WISE). WISE provides wheel profile and dimensional measurements, i.e. rim thickness, flange height, flange ...

  5. Intelligent systems

    CERN Document Server

    Irwin, J David

    2011-01-01

    Technology has now progressed to the point that intelligent systems are replacing humans in the decision making processes as well as aiding in the solution of very complex problems. In many cases intelligent systems are already outperforming human activities. Artificial neural networks are not only capable of learning how to classify patterns, such images or sequence of events, but they can also effectively model complex nonlinear systems. Their ability to classify sequences of events is probably more popular in industrial applications where there is an inherent need to model nonlinear system

  6. Nuclear Plant Inspection

    Science.gov (United States)

    1983-01-01

    Engineers from the Power Authority of the State of New York use a Crack Growth Analysis Program supplied by COSMIC (Computer Software Management and Information Center) in one stage of nuclear plant inspection. Welds of the nuclear steam supply system are checked for cracks; radiographs, dye penetration and visual inspections are performed to locate cracks in the metal structure and welds. The software package includes three separate crack growth analysis models and enables necessary repairs to be planned before serious problems develop.

  7. Artificial Intelligence: Applications in Education.

    Science.gov (United States)

    Thorkildsen, Ron J.; And Others

    1986-01-01

    Artificial intelligence techniques are used in computer programs to search out rapidly and retrieve information from very large databases. Programing advances have also led to the development of systems that provide expert consultation (expert systems). These systems, as applied to education, are the primary emphasis of this article. (LMO)

  8. Speech Intelligibility

    Science.gov (United States)

    Brand, Thomas

    Speech intelligibility (SI) is important for different fields of research, engineering and diagnostics in order to quantify very different phenomena like the quality of recordings, communication and playback devices, the reverberation of auditoria, characteristics of hearing impairment, benefit using hearing aids or combinations of these things.

  9. Multiple Intelligences.

    Science.gov (United States)

    Laughlin, Janet

    1999-01-01

    Details the characteristics of Howard Gardner's seven multiple intelligences (MI): linguistic, logical-mathematical, bodily-kinesthetic, spatial, musical, interpersonal, and intrapersonal. Discusses the implications of MI for instruction. Explores how students can study using their preferred learning style - visual, auditory, and physical study…

  10. Corneal Intelligence

    African Journals Online (AJOL)

    Murdoch3

    Corneal Intelligence. Ian Murdoch. Institute of Ophthalmology, Bath Street, London. In 2002, the ocular hypertension treatment study (OHTS) published their results. This study had taken 1636 ocular hypertensives. 1, 2. (IOP 24-32mmHg) and randomized them to receive therapy or no therapy. The primary outcome of the ...

  11. Inspection operation aid device and method for control rod drives and hydraulic control system

    Energy Technology Data Exchange (ETDEWEB)

    Shimizu, Shun-ichi; Yamamoto, Hiroki; Okuzumi, Naoaki; Ishisato, Shin-ichi

    1995-12-12

    The device of the present invention comprises an input/output device for inputting/outputting various data required for evaluation of integrity, a memorizing/storing device, an information processing device and a display device. Friction data as differential pressure signals of driving hydraulic pressures measured upon inspection/test operation of control rod drives and hydraulic pressure control system are taken into the input/output device. A result of processing for friction signal waveform pattern is calculated. The integrity and abnormality of the control rod drives and the hydraulic pressure system are evaluated using a causal relation between the result of the signal processing for obtained waveform patterns and the intelligence/knowledge of behaviors of the control rod devices and the hydraulic pressure control system thereby providing integrity data. Since the friction data can be calculated automatically by signal waveform pattern processing, there is no need to read the data manually by specialists who take part in the inspection and test. As a result, data on evaluation for integrity and abnormality of the control rod drives and the hydraulic pressure control system can be provided rapidly. (N.H.).

  12. Inspection Strategies for Concrete Bridges

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Thoft-Christensen, Palle

    1989-01-01

    In this paper an optimal inspection strategy for concrete bridges based on periodic routine and detailed inspections is presented. The failure mode considered is corrosion of the reinforcement due to chlorides. A simple modelling of the corrosion and of the inspection strategy is presented....... The optimal inspection strategy is determined from an optimization problem, where the design variables are time intervals between detailed inspections and the concrete cover. The strategy is illustrated on a simple structure, namely a reinforced concrete beam....

  13. Architecture for robot intelligence

    Science.gov (United States)

    Peters, II, Richard Alan (Inventor)

    2004-01-01

    An architecture for robot intelligence enables a robot to learn new behaviors and create new behavior sequences autonomously and interact with a dynamically changing environment. Sensory information is mapped onto a Sensory Ego-Sphere (SES) that rapidly identifies important changes in the environment and functions much like short term memory. Behaviors are stored in a DBAM that creates an active map from the robot's current state to a goal state and functions much like long term memory. A dream state converts recent activities stored in the SES and creates or modifies behaviors in the DBAM.

  14. Piping inspection round robin

    Energy Technology Data Exchange (ETDEWEB)

    Heasler, P.G.; Doctor, S.R. [Pacific Northwest National Lab., Richland, WA (United States)

    1996-04-01

    The piping inspection round robin was conducted in 1981 at the Pacific Northwest National Laboratory (PNNL) to quantify the capability of ultrasonics for inservice inspection and to address some aspects of reliability for this type of nondestructive evaluation (NDE). The round robin measured the crack detection capabilities of seven field inspection teams who employed procedures that met or exceeded the 1977 edition through the 1978 addenda of the American Society of Mechanical Engineers (ASME) Section 11 Code requirements. Three different types of materials were employed in the study (cast stainless steel, clad ferritic, and wrought stainless steel), and two different types of flaws were implanted into the specimens (intergranular stress corrosion cracks (IGSCCs) and thermal fatigue cracks (TFCs)). When considering near-side inspection, far-side inspection, and false call rate, the overall performance was found to be best in clad ferritic, less effective in wrought stainless steel and the worst in cast stainless steel. Depth sizing performance showed little correlation with the true crack depths.

  15. Spiritual Intelligence, Emotional Intelligence and Auditor's Performance

    OpenAIRE

    Hanafi, Rustam

    2010-01-01

    The objective of this research was to investigate empirical evidence about influence audi-tor spiritual intelligence on the performance with emotional intelligence as a mediator variable. Linear regression models are developed to examine the hypothesis and path analysis. The de-pendent variable of each model is auditor performance, whereas the independent variable of model 1 is spiritual intelligence, of model 2 are emotional intelligence and spiritual intelligence. The parameters were estima...

  16. Integrating artificial intelligence into organizational intelligence

    OpenAIRE

    Leon, Florin; Gabriela M. Atanasiu

    2008-01-01

    Organizational intelligence is the capability of an organization to create knowledge and to use it in order to strategically adapt to its environment. Intelligence of an organization is more than the aggregated intelligence of its members – it is an emergent property of the complex interactions of its subsystems and the way they are aggregated. Processes analyse related to organizational intelligence can be achieved by means of agent-based simulations. Distributed artificial intelligence addr...

  17. Statistical optimization of shearography inspections

    Science.gov (United States)

    Temple, Enoch C.

    1996-01-01

    The space industry has developed many composite materials that have been designed to have high durability in proportion to their weights. Many of these materials have a likelihood for flaws that is higher than in traditional metals. There are also material coverings (such as paint) that develop flaws that may adversely affect the performance of the system in which they are used. Therefore, there is a need to monitor the soundness of composite structures. To meet this monitoring need, many nondestructive evaluation (NDE) systems have been developed. An NDE system is designed to detect material flaws and make flaw measurements without destroying the inspected item. Also, the detection operation is expected to be performed in a rapid manner in a field or production environment.

  18. Advances in inspection automation

    Science.gov (United States)

    Weber, Walter H.; Mair, H. Douglas; Jansen, Dion; Lombardi, Luciano

    2013-01-01

    This new session at QNDE reflects the growing interest in inspection automation. Our paper describes a newly developed platform that makes the complex NDE automation possible without the need for software programmers. Inspection tasks that are tedious, error-prone or impossible for humans to perform can now be automated using a form of drag and drop visual scripting. Our work attempts to rectify the problem that NDE is not keeping pace with the rest of factory automation. Outside of NDE, robots routinely and autonomously machine parts, assemble components, weld structures and report progress to corporate databases. By contrast, components arriving in the NDT department typically require manual part handling, calibrations and analysis. The automation examples in this paper cover the development of robotic thickness gauging and the use of adaptive contour following on the NRU reactor inspection at Chalk River.

  19. Intelligence artificielle, linguistique et cognition

    OpenAIRE

    Sabah, Gérard

    2017-01-01

    Après un historique rapide retraçant l’évolution des façons de concevoir le traitement automatique des langues dans la perspective « cognitiviste » de l’intelligence artificielle, nous évoquerons les divers types de connaissances considérées en informatique linguistique. L’article présentera ensuite les limites de l’intelligence artificielle actuelle, et analysera les raisons de ces limites. Après avoir souligné l’importance de la langue tant dans la communication homme-machine que pour le dé...

  20. Team B Intelligence Coups

    Science.gov (United States)

    Mitchell, Gordon R.

    2006-01-01

    The 2003 Iraq prewar intelligence failure was not simply a case of the U.S. intelligence community providing flawed data to policy-makers. It also involved subversion of the competitive intelligence analysis process, where unofficial intelligence boutiques "stovepiped" misleading intelligence assessments directly to policy-makers and…

  1. Intelligent Design and Intelligent Failure

    Science.gov (United States)

    Jerman, Gregory

    2015-01-01

    Good Evening, my name is Greg Jerman and for nearly a quarter century I have been performing failure analysis on NASA's aerospace hardware. During that time I had the distinct privilege of keeping the Space Shuttle flying for two thirds of its history. I have analyzed a wide variety of failed hardware from simple electrical cables to cryogenic fuel tanks to high temperature turbine blades. During this time I have found that for all the time we spend intelligently designing things, we need to be equally intelligent about understanding why things fail. The NASA Flight Director for Apollo 13, Gene Kranz, is best known for the expression "Failure is not an option." However, NASA history is filled with failures both large and small, so it might be more accurate to say failure is inevitable. It is how we react and learn from our failures that makes the difference.

  2. Subsea Infrastructure Inspection

    DEFF Research Database (Denmark)

    Mai, Christian; Pedersen, Simon; Hansen, Leif

    2016-01-01

    of the offshore pipeline inspections are currently committed using Towed or Remotely Operated Vehicle (ROV) systems. It is well-known that the ROVs are very time-consuming and expensive to operate, with respect to the fact that they require a relatively large support ship to accommodate the equipment as well...

  3. Pre-Demolition Inspections

    Science.gov (United States)

    A pre-demolition inspection may be one of the most helpful and cost-efficient steps you can take to identify materials that should (or must) be removed from buildings prior to demolition. In some cases it may be required by regulation.

  4. Automatic Inspection During Machining

    Science.gov (United States)

    Ransom, Clyde L.

    1988-01-01

    In experimental manufacturing process, numerically-controlled machine tool temporarily converts into inspection machine by installing electronic touch probes and specially-developed numerical-control software. Software drives probes in paths to and on newly machined parts and collects data on dimensions of parts.

  5. Innovative Inspection Techniques

    Science.gov (United States)

    1993-01-01

    Shearography ...................................... 45 5.14 Vibration M onitoring . ................................ 46 5.15 NDT Summary...41 Figure 15 Acoustic Emissions System for Experiments ..................... 42 Figure 16 X-Ray Test Equipment...equipment needed for a remote video system that could be used in marine inspection. ix Executive Summary This report provides the results of a three phase

  6. Computational intelligence in biomedical imaging

    CERN Document Server

    2014-01-01

    This book provides a comprehensive overview of the state-of-the-art computational intelligence research and technologies in biomedical images with emphasis on biomedical decision making. Biomedical imaging offers useful information on patients’ medical conditions and clues to causes of their symptoms and diseases. Biomedical images, however, provide a large number of images which physicians must interpret. Therefore, computer aids are demanded and become indispensable in physicians’ decision making. This book discusses major technical advancements and research findings in the field of computational intelligence in biomedical imaging, for example, computational intelligence in computer-aided diagnosis for breast cancer, prostate cancer, and brain disease, in lung function analysis, and in radiation therapy. The book examines technologies and studies that have reached the practical level, and those technologies that are becoming available in clinical practices in hospitals rapidly such as computational inte...

  7. Case studies in intelligent computing achievements and trends

    CERN Document Server

    Issac, Biju

    2014-01-01

    Although the field of intelligent systems has grown rapidly in recent years, there has been a need for a book that supplies a timely and accessible understanding of this important technology. Filling this need, Case Studies in Intelligent Computing: Achievements and Trends provides an up-to-date introduction to intelligent systems.This edited book captures the state of the art in intelligent computing research through case studies that examine recent developments, developmental tools, programming, and approaches related to artificial intelligence (AI). The case studies illustrate successful ma

  8. Big Lake Dam Inspection Report

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — This report summarizes an inspection of the Big Lake Dam that was done in September of 1983. The inspection did not reveal any conditions that constitute and...

  9. New trends in computational collective intelligence

    CERN Document Server

    Kim, Sang-Wook; Trawiński, Bogdan

    2015-01-01

    This book consists of 20 chapters in which the authors deal with different theoretical and practical aspects of new trends in Collective Computational Intelligence techniques. Computational Collective Intelligence methods and algorithms are one the current trending research topics from areas related to Artificial Intelligence, Soft Computing or Data Mining among others. Computational Collective Intelligence is a rapidly growing field that is most often understood as an AI sub-field dealing with soft computing methods which enable making group decisions and processing knowledge among autonomous units acting in distributed environments. Web-based Systems, Social Networks, and Multi-Agent Systems very often need these tools for working out consistent knowledge states, resolving conflicts and making decisions. The chapters included in this volume cover a selection of topics and new trends in several domains related to Collective Computational Intelligence: Language and Knowledge Processing, Data Mining Methods an...

  10. Guide for Ship Structural Inspections

    Science.gov (United States)

    1990-08-02

    000- 1000, Naval Ship Systems Command, 1968. (7) "IH1 SPAIS - The Shipbuilding Process and Inspection Standard", Ishikawajima - Harima Heavy Industries Co...each subsequent special survey. IHI Japanese shipyard: " Ishikawajima Harima Heavy Industries " "In-Service" Inspection Inspections performed on the...specifying inspections in excess of what is necessary to ensure structural integrity of the completed vessel, an extra heavy cost burden may be imposed

  11. Detecting nuclear materials smuggling: performance evaluation of container inspection policies.

    Science.gov (United States)

    Gaukler, Gary M; Li, Chenhua; Ding, Yu; Chirayath, Sunil S

    2012-03-01

    In recent years, the United States, along with many other countries, has significantly increased its detection and defense mechanisms against terrorist attacks. A potential attack with a nuclear weapon, using nuclear materials smuggled into the country, has been identified as a particularly grave threat. The system for detecting illicit nuclear materials that is currently in place at U.S. ports of entry relies heavily on passive radiation detectors and a risk-scoring approach using the automated targeting system (ATS). In this article we analyze this existing inspection system and demonstrate its performance for several smuggling scenarios. We provide evidence that the current inspection system is inherently incapable of reliably detecting sophisticated smuggling attempts that use small quantities of well-shielded nuclear material. To counter the weaknesses of the current ATS-based inspection system, we propose two new inspection systems: the hardness control system (HCS) and the hybrid inspection system (HYB). The HCS uses radiography information to classify incoming containers based on their cargo content into "hard" or "soft" containers, which then go through different inspection treatment. The HYB combines the radiography information with the intelligence information from the ATS. We compare and contrast the relative performance of these two new inspection systems with the existing ATS-based system. Our studies indicate that the HCS and HYB policies outperform the ATS-based policy for a wide range of realistic smuggling scenarios. We also examine the impact of changes in adversary behavior on the new inspection systems and find that they effectively preclude strategic gaming behavior of the adversary. © 2011 Society for Risk Analysis.

  12. Web Intelligence and Artificial Intelligence in Education

    Science.gov (United States)

    Devedzic, Vladan

    2004-01-01

    This paper surveys important aspects of Web Intelligence (WI) in the context of Artificial Intelligence in Education (AIED) research. WI explores the fundamental roles as well as practical impacts of Artificial Intelligence (AI) and advanced Information Technology (IT) on the next generation of Web-related products, systems, services, and…

  13. Business Intelligence

    OpenAIRE

    Petersen, Anders

    2001-01-01

    Cílem této bakalářské práce je seznámení s Business Intelligence a zpracování vývojového trendu, který ovlivňuje podobu řešení Business Intelligence v podniku ? Business Activity Monitoring. Pro zpracování tohoto tématu byla použita metoda studia odborných pramenů, a to jak v českém, tak v anglickém jazyce. Hlavním přínosem práce je ucelený, v českém jazyce zpracovaný materiál pojednávající o Business Activity Monitoring. Práce je rozdělena do šesti hlavních kapitol. Prvních pět je věnováno p...

  14. Overview of the software inspection process

    Energy Technology Data Exchange (ETDEWEB)

    Lane, G.L.; Dabbs, R. [Sandia National Labs., Albuquerque, NM (United States)

    1997-11-01

    This tutorial introduces attendees to the Inspection Process and teaches them how to organize and participate in a software inspection. The tutorial advocates the benefits of inspections and encourages attendees to socialize the inspection process in their organizations.

  15. Track inspection planning and risk measurement analysis.

    Science.gov (United States)

    2014-11-01

    This project models track inspection operations on a railroad network and discusses how the inspection results can : be used to measure the risk of failure on the tracks. In particular, the inspection times of the tracks, inspection frequency of the ...

  16. Inspection tester for explosives

    Science.gov (United States)

    Haas, Jeffrey S.; Simpson, Randall L.; Satcher, Joe H.

    2007-11-13

    An inspection tester that can be used anywhere as a primary screening tool by non-technical personnel to determine whether a surface contains explosives. It includes a body with a sample pad. First and second explosives detecting reagent holders and dispensers are operatively connected to the body and the sample pad. The first and second explosives detecting reagent holders and dispensers are positioned to deliver the explosives detecting reagents to the sample pad. A is heater operatively connected to the sample pad.

  17. Simplified Approach to Inspection Planning

    DEFF Research Database (Denmark)

    Bloch, Allan; Sørensen, John Dalsgaard; Faber, Michael Havbro

    2000-01-01

    structural details and thereby develop pre-made inspection plans in tables which depend on relative cost of inspections, repairs and failures. Due to the simplicity of the format of the developed inspection plans the proposed approach has a high potential in code making for the design and maintenance......A simplified and practically applicable approach for risk based inspection planning of fatigue sensitive structural details is presented. The basic idea behind the approach is that the fatigue sensitive details are categorized according to their stress intensity factors and their design fatigue...... of steel structures. The validity of the proposed approach is illustrated through a study regarding inspection planning of offshore structures....

  18. Terahertz Radome Inspection

    Directory of Open Access Journals (Sweden)

    Fabian Friederich

    2018-01-01

    Full Text Available Radomes protecting sensitive radar, navigational, and communications equipment of, e.g., aircraft, are strongly exposed to the environment and have to withstand harsh weather conditions and potential impacts. Besides their significance to the structural integrity of the radomes, it is often crucial to optimize the composite structures for best possible radio performance. Hence, there exists a significant interest in non-destructive testing techniques, which can be used for defect inspection of radomes in field use as well as for quality inspection during the manufacturing process. Contactless millimeter-wave and terahertz imaging techniques provide millimeter resolution and have the potential to address both application scenarios. We report on our development of a three-dimensional (3D terahertz imaging system for radome inspection during industrial manufacturing processes. The system was designed for operation within a machining center for radome manufacturing. It simultaneously gathers terahertz depth information in adjacent frequency ranges, from 70 to 110 GHz and from 110 to 170 GHz by combining two frequency modulated continuous-wave terahertz sensing units into a single measurement device. Results from spiraliform image acquisition of a radome test sample demonstrate the successful integration of the measurement system.

  19. Terra Incognita: Mapping American Intelligence Education Curriculum

    Directory of Open Access Journals (Sweden)

    Stephen Coulthart

    2015-09-01

    Full Text Available For more than two decades, degree-granting intelligence programs have popped up around the U.S., representing the largest and perhaps most enduring investment in American intelligence education. Scholars have addressed issues in American intelligence education, but to date, there has been no focused study that has mapped and analyzed these programs. This article addresses this gap by answering the questions: What are the American intelligence programs and what content is being taught? We answered this question by systematically identifying all 17 American intelligence education programs (1992-2012. The picture that emerges is one of delayed, but rapid growth: most programs were founded after 2005. After collecting and analyzing hundreds of course descriptions using a widely-accepted qualitative data analysis method called constant comparison, we mapped the curricular structure of the intelligence programs in aggregate. The contribution of this research is to increase understanding of the structure of American intelligence curriculum for current and future intelligence educators as well as employers.

  20. Factors Driving Business Intelligence Culture

    OpenAIRE

    Rimvydas Skyrius; Igor Katin; Michail Kazimianec; Svetlana Nemitko; Gediminas Rumšas; Raimundas Žilinskas

    2016-01-01

    The field of business intelligence (BI), despite rapid technology advances, continues to feature inadequate levels of adoption. The attention of researchers is shifting towards hu-man factors of BI adoption. The wide set of human factors influencing BI adoption con-tains elements of what we call BI culture – an overarching concept covering key managerial issues that come up in BI implementation. Research sources provide different sets of features pertaining to BI culture or related concepts –...

  1. Intelligent products : A survey

    NARCIS (Netherlands)

    Meyer, G.G.; Främling, K.; Holmström, J.

    This paper presents an overview of the field of Intelligent Products. As Intelligent Products have many facets, this paper is mainly focused on the concept behind Intelligent Products, the technical foundations, and the achievable practical goals of Intelligent Products. A novel classification of

  2. Intelligent Routines

    CERN Document Server

    Anastassiou, George A

    Intelligent Routines II: Solving Linear Algebra and Differential Geometry with Sage” contains numerous of examples and problems as well as many unsolved problems. This book extensively applies the successful software Sage, which can be found free online http://www.sagemath.org/. Sage is a recent and popular software for mathematical computation, available freely and simple to use. This book is useful to all applied scientists in mathematics, statistics and engineering, as well for late undergraduate and graduate students of above subjects. It is the first such book in solving symbolically with Sage problems in Linear Algebra and Differential Geometry. Plenty of SAGE applications are given at each step of the exposition.

  3. Intelligent Governmentality

    Directory of Open Access Journals (Sweden)

    Willem de Lint

    2008-10-01

    Full Text Available Recently, within liberal democracies, the post-Westphalian consolidation of security and intelligence has ushered in the normalization not only of security in ‘securitization’ but also of intelligence in what is proposed here as ‘intelligencification.’ In outlining the features of intelligencified governance, my aim is to interrogate the view that effects or traces, and productivity rather than negation is as persuasive as commonly thought by the constructivists. After all, counter-intelligence is both about purging and reconstructing the archive for undisclosed values. In practice, what is being normalized is the authorized and legalized use of release and retention protocols of politically actionable information. The intelligencification of governmentality affords a sovereignty shell-game or the instrumentalization of sovereign power by interests that are dependent on, yet often inimical to, the power of state, national, and popular sovereignty. On voit le politique et le social comme dépendant de contingences exclusives. Récemment, au sein des démocraties libérales, la consolidation de la sécurité et des services de renseignements de sécurité qui a suivi les traités de la Westphalie a donné lieu à la normalisation non seulement de la sécurité en «sécurisation» mais aussi des services de renseignements de sécurité en ce qui est proposé ici comme «intelligencification» [terme anglais créé par l’auteur, dérivé du mot anglais «intelligence» dans le sens de renseignements des écurité]. En particulier, ce que l’on normalise dans le but de contourner des contingences exclusives est l’utilisation autorisée et légalisée de protocoles de communication et de rétention d’information qui, politiquement, pourrait mener à des poursuites. En esquissant les traits de la gouvernance «intelligencifiée», mon but est d’interroger le point de vue que les effets ou les traces, et la productivité plutôt que la

  4. Intelligible Pronunciation

    Directory of Open Access Journals (Sweden)

    Luciana Junqueira

    2016-07-01

    Full Text Available It is an accepted fact in the fields of Applied Linguistics and Second Language Acquisition that most people who learn a second language after puberty do not acquire a native-like accent, showing non-native patterns in their pronunciation (DERWING, 2003; GASS and SELINKER, 2008; BROWN, 2007. As a result, in the past few decades scholars have argued for the implementation of more realistic goals for pronunciation and speaking instruction, such as intelligibility and comprehensibility, in the ESL/EFL fields. However, despite the numerous studies discouraging the pursuit of native-like accents and promoting more realistic goals, the number of students who desire to sound like native speakers is still overwhelming (DERWING, 2003; DERWING; MUNRO, 2005; JENKINS, 2005; LEVIS, 2005; WATERS, 2007. Moreover, it is clear that several schools and language institutes, among other educational institutions, value native speakers over non-native professionals. Another very current manifestation in the field is the constant promotion of programs that strive for accent reduction and of pronunciation materials that promise native-like pronunciation (LEVIS, 2005; MUNRO; DERWIN; SATO, 2006. The lack of empirical research and of materials that are applied to teachers’ and students’ needs in the classroom is also a major problem encountered in current pronunciation instruction (DERWING; MUNRO, 2005. Lastly, non-native accents generate social evaluations, which are usually negative. Accordingly, in this work, in order to better understand this debate, I briefly review the history of pronunciation instruction, focusing on the issues of intelligibility, comprehensibility, and identity, and analyze the societal evaluations underlying the complex and social phenomenon of pronunciation. Furthermore, I propose directions I believe could be taken in attempt to improve the present situation for pronunciation teaching and beliefs about native-like/non-native accents.

  5. Intelligence: Real or artificial?

    OpenAIRE

    Schlinger, Henry D.

    1992-01-01

    Throughout the history of the artificial intelligence movement, researchers have strived to create computers that could simulate general human intelligence. This paper argues that workers in artificial intelligence have failed to achieve this goal because they adopted the wrong model of human behavior and intelligence, namely a cognitive essentialist model with origins in the traditional philosophies of natural intelligence. An analysis of the word “intelligence” suggests that it originally r...

  6. Shell Inspection History and Current CMM Inspection Efforts

    Energy Technology Data Exchange (ETDEWEB)

    Montano, Joshua Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-01-26

    The following report provides a review of past and current CMM Shell Inspection efforts. Calibration of the Sheffield rotary contour gauge has expired and the primary inspector, Matthew Naranjo, has retired. Efforts within the Inspection team are transitioning from maintaining and training new inspectors on Sheffield to off-the-shelf CMM technology. Although inspection of a shell has many requirements, the scope of the data presented in this report focuses on the inner contour, outer contour, radial wall thickness and mass comparisons.

  7. Comparative study of Palito inspection and MFL Inspection

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Anne A. de; Miranda, Ivan Vicente Janvrot; Silva, Jose Augusto Pereira da [Pipeway Engenharia, Rio de Janeiro, RJ (Brazil); Guimaraes, Frederico S.; Magalhaes, Joao Alfredo P. [Minds at Work, Rio de Janeiro, RJ (Brazil); Sabino, Joao Marcos [Petroleo Brasileiro S.A. (PETROBRAS/UN-RN/CE), Natal, RN (Brazil). Unidade de Negocios Rio Grande do Norte e Ceara

    2009-07-01

    A 16 inches oil pipeline was surveyed with MFL and Palito pig in 2007. The MFL inspection was performed by Pipeway Engenharia while Palito inspection was performed by PETROBRAS. A comparison between the results of these two ILI inspections has been made to validate Palito Pig and to assess main characteristics and differences between the two techniques. The purpose of this paper is to detail the methodology applied to perform the comparison and to present a comparative study of results registered in the MFL and Palito inspections by Pipeway Engenharia, PETROBRAS/CENPES and CPTI/PUC-Rio. (author)

  8. Assessment of Arteriovenous Shunt Pathway Function and Hypervolemia for Hemodialysis Patients by Using Integrated Rapid Screening System

    Directory of Open Access Journals (Sweden)

    Wei-Ling Chen

    2017-06-01

    Full Text Available Currently, the hemodialysis patients received body weight measurement by themselves, vital sign checking by nursing staffs before dialysis. Whenever, the arteriovenous routes with problems doubted, the patients needed to be referred to surgeon for vascular echography checking and then to be corrected. How to integrate these three tasks in one time is a very important issue. The project proposes to combine our previous study of audio-phono angiographic technology in detecting vascular stenosis with rapid screening system to evaluate dialysis patients’ arteriovenous routes function and their status of excess body fluids: inspecting and integrating the blood pressure, body weight, and fistula function work into a rapid screening system, and using the quantization of fistula phono angiography pitch to achieve assessing arteriovenous routes. Future hoping is developed a complete integrated intelligence system by combining the arteriovenous fistula signal processing with feature extraction with wireless sensor network technology.

  9. Intelligence Community Reorganization: Potential Effects on DOD Intelligence Agencies

    National Research Council Canada - National Science Library

    Best, Jr, Richard A

    2004-01-01

    Although the Central Intelligence Agency (CIA) is the best known member of the Intelligence Community, the bulk of the nation's intelligence effort is undertaken by the intelligence agencies of the Department of Defense (DoD...

  10. Robotic Platform for Internal Inspection

    OpenAIRE

    Cope, Brian Alexander

    2013-01-01

    This thesis describes the design of a robotic inspection tool which is based on a differential track-drive platform. The robotic inspection tool is a one man-portable UGV that has been developed for the purpose of non-destructive evaluation (NDE) and internal inspection of environments where human penetration may be difficult or hazardous. Various NDE and sensing techniques are described in this paper but the focus is on the mechanical and electrical design of the platform itself. The platfor...

  11. Waste inspection tomography (WIT)

    Energy Technology Data Exchange (ETDEWEB)

    Bernardi, R.T. [Bio-Imaging Research, Inc., Lincolnshire, IL (United States)

    1995-10-01

    Waste Inspection Tomography (WIT) provides mobile semi-trailer mounted nondestructive examination (NDE) and assay (NDA) for nuclear waste drum characterization. WIT uses various computed tomography (CT) methods for both NDE and NDA of nuclear waste drums. Low level waste (LLW), transuranic (TRU), and mixed radioactive waste can be inspected and characterized without opening the drums. With externally transmitted x-ray NDE techniques, WIT has the ability to identify high density waste materials like heavy metals, define drum contents in two- and three-dimensional space, quantify free liquid volumes through density and x-ray attenuation coefficient discrimination, and measure drum wall thickness. With waste emitting gamma-ray NDA techniques, WIT can locate gamma emitting radioactive sources in two- and three-dimensional space, identify gamma emitting, isotopic species, identify the external activity levels of emitting gamma-ray sources, correct for waste matrix attenuation, provide internal activity approximations, and provide the data needed for waste classification as LLW or TRU.

  12. Nap sleep spindle correlates of intelligence.

    Science.gov (United States)

    Ujma, Péter P; Bódizs, Róbert; Gombos, Ferenc; Stintzing, Johannes; Konrad, Boris N; Genzel, Lisa; Steiger, Axel; Dresler, Martin

    2015-11-26

    Sleep spindles are thalamocortical oscillations in non-rapid eye movement (NREM) sleep, that play an important role in sleep-related neuroplasticity and offline information processing. Several studies with full-night sleep recordings have reported a positive association between sleep spindles and fluid intelligence scores, however more recently it has been shown that only few sleep spindle measures correlate with intelligence in females, and none in males. Sleep spindle regulation underlies a circadian rhythm, however the association between spindles and intelligence has not been investigated in daytime nap sleep so far. In a sample of 86 healthy male human subjects, we investigated the correlation between fluid intelligence and sleep spindle parameters in an afternoon nap of 100 minutes. Mean sleep spindle length, amplitude and density were computed for each subject and for each derivation for both slow and fast spindles. A positive association was found between intelligence and slow spindle duration, but not any other sleep spindle parameter. As a positive correlation between intelligence and slow sleep spindle duration in full-night polysomnography has only been reported in females but not males, our results suggest that the association between intelligence and sleep spindles is more complex than previously assumed.

  13. How to Improve Artificial Intelligence through Web

    Directory of Open Access Journals (Sweden)

    Adrian LUPASC

    2005-10-01

    Full Text Available Intelligent agents, intelligent software applications and artificial intelligent applications from artificial intelligence service providers maymake their way onto the Web in greater number as adaptive software, dynamic programming languages and Learning Algorithms are introduced intoWeb Services. The evolution of Web architecture may allow intelligent applications to run directly on the Web by introducing XML, RDF and logiclayer. The Intelligent Wireless Web’s significant potential for rapidly completing information transactions may take an important contribution toglobal worker productivity. Artificial intelligence can be defined as the study of the ways in which computers can be made to perform cognitivetasks. Examples of such tasks include understanding natural language statements, recognizing visual patterns or scenes, diagnosing diseases orillnesses, solving mathematical problems, performing financial analyses, learning new procedures for solving problems. The term expert system canbe considered to be a particular type of knowledge-based system. An expert system is a system in which the knowledge is deliberately represented“as it is”. Expert systems are applications that make decisions in real-life situations that would otherwise be performed by a human expert. They areprograms designed to mimic human performance at specialized, constrained problem-solving tasks. They are constructed as a collection of IF-THENproduction rules combined with a reasoning engine that applies those rules, either in a forward or backward direction, to specific problems.

  14. Intelligence Policy and the Science of Intelligence

    Science.gov (United States)

    Baginski, Maureen

    Intelligence policy must protect the security of intelligence sources, and the privacy of individuals. We have moved away from a world in which the most important information was secret, and was very hard to collect. Today there is a lot of valuable information that is available open source, and provides key context for intelligence analysis. At the same time, a scientific focus is needed to define the missing elements, so that they can be collected. Moving away from the “vacuum cleaner” approach will improve intelligence operations and, at the same time, solve many of the most difficult issues of privacy of citizens and security of sources.

  15. Educational Programs for Intelligence Professionals.

    Science.gov (United States)

    Miller, Jerry P.

    1994-01-01

    Discusses the need for education programs for competitive intelligence professionals. Highlights include definitions of intelligence functions, focusing on business intelligence; information utilization by decision makers; information sources; competencies for intelligence professionals; and the development of formal education programs. (38…

  16. Textbooks Content Analysis of Social Studies and Natural Sciences of Secondary School Based on Emotional Intelligence Components

    Science.gov (United States)

    Babaei, Bahare; Abdi, Ali

    2014-01-01

    The aim of this study is to analyze the content of social studies and natural sciences textbooks of the secondary school on the basis of the emotional intelligence components. In order to determine and inspect the emotional intelligence components all of the textbooks content (including texts, exercises, and illustrations) was examined based on…

  17. A New Dimension of Business Intelligence: Location-based Intelligence

    OpenAIRE

    Zeljko Panian

    2012-01-01

    Through the course of this paper we define Locationbased Intelligence (LBI) which is outgrowing from process of amalgamation of geolocation and Business Intelligence. Amalgamating geolocation with traditional Business Intelligence (BI) results in a new dimension of BI named Location-based Intelligence. LBI is defined as leveraging unified location information for business intelligence. Collectively, enterprises can transform location data into business intelligence applic...

  18. Automated visual inspection of brake shoe wear

    Science.gov (United States)

    Lu, Shengfang; Liu, Zhen; Nan, Guo; Zhang, Guangjun

    2015-10-01

    With the rapid development of high-speed railway, the automated fault inspection is necessary to ensure train's operation safety. Visual technology is paid more attention in trouble detection and maintenance. For a linear CCD camera, Image alignment is the first step in fault detection. To increase the speed of image processing, an improved scale invariant feature transform (SIFT) method is presented. The image is divided into multiple levels of different resolution. Then, we do not stop to extract the feature from the lowest resolution to the highest level until we get sufficient SIFT key points. At that level, the image is registered and aligned quickly. In the stage of inspection, we devote our efforts to finding the trouble of brake shoe, which is one of the key components in brake system on electrical multiple units train (EMU). Its pre-warning on wear limitation is very important in fault detection. In this paper, we propose an automatic inspection approach to detect the fault of brake shoe. Firstly, we use multi-resolution pyramid template matching technology to fast locate the brake shoe. Then, we employ Hough transform to detect the circles of bolts in brake region. Due to the rigid characteristic of structure, we can identify whether the brake shoe has a fault. The experiments demonstrate that the way we propose has a good performance, and can meet the need of practical applications.

  19. Intelligent route surveillance

    NARCIS (Netherlands)

    Schoemaker, R.M.; Sandbrink, R.D.J.; Voorthuijsen, G.P. van

    2009-01-01

    Intelligence on abnormal and suspicious behaviour along roads in operational domains is extremely valuable for countering the IED (Improvised Explosive Device) threat. Local sensor networks at strategic spots can gather data for continuous monitoring of daily vehicle activity. Unattended intelligent

  20. Intelligent Computer Graphics 2012

    CERN Document Server

    Miaoulis, Georgios

    2013-01-01

    In Computer Graphics, the use of intelligent techniques started more recently than in other research areas. However, during these last two decades, the use of intelligent Computer Graphics techniques is growing up year after year and more and more interesting techniques are presented in this area.   The purpose of this volume is to present current work of the Intelligent Computer Graphics community, a community growing up year after year. This volume is a kind of continuation of the previously published Springer volumes “Artificial Intelligence Techniques for Computer Graphics” (2008), “Intelligent Computer Graphics 2009” (2009), “Intelligent Computer Graphics 2010” (2010) and “Intelligent Computer Graphics 2011” (2011).   Usually, this kind of volume contains, every year, selected extended papers from the corresponding 3IA Conference of the year. However, the current volume is made from directly reviewed and selected papers, submitted for publication in the volume “Intelligent Computer Gr...

  1. Advanced intelligent systems

    CERN Document Server

    Ryoo, Young; Jang, Moon-soo; Bae, Young-Chul

    2014-01-01

    Intelligent systems have been initiated with the attempt to imitate the human brain. People wish to let machines perform intelligent works. Many techniques of intelligent systems are based on artificial intelligence. According to changing and novel requirements, the advanced intelligent systems cover a wide spectrum: big data processing, intelligent control, advanced robotics, artificial intelligence and machine learning. This book focuses on coordinating intelligent systems with highly integrated and foundationally functional components. The book consists of 19 contributions that features social network-based recommender systems, application of fuzzy enforcement, energy visualization, ultrasonic muscular thickness measurement, regional analysis and predictive modeling, analysis of 3D polygon data, blood pressure estimation system, fuzzy human model, fuzzy ultrasonic imaging method, ultrasonic mobile smart technology, pseudo-normal image synthesis, subspace classifier, mobile object tracking, standing-up moti...

  2. Review of Manufacturing Intelligence

    OpenAIRE

    Stokey, Richard

    1990-01-01

    "Manufacturing Intelligence (Addison Wesley, Reading, Massachusetts, 1988, 352 pages, $43.25, ISBN 0-201-13576-0) by Paul Kenneth Wright and David Alan Bourne develops principles for the design of intelligent machine tools.

  3. Intelligence Issues for Congress

    National Research Council Canada - National Science Library

    Best. Jr, Richard A

    2002-01-01

    ... of Central Intelligence (DCI). Priority continues to be placed on intelligence support to military operations and on involvement in efforts to combat narcotics trafficking and, especially since September 11, 2001, international terrorism...

  4. Computational intelligence in optimization

    CERN Document Server

    Tenne, Yoel

    2010-01-01

    This volume presents a collection of recent studies covering the spectrum of computational intelligence applications with emphasis on their application to challenging real-world problems. Topics covered include: Intelligent agent-based algorithms, Hybrid intelligent systems, Cognitive and evolutionary robotics, Knowledge-Based Engineering, fuzzy sets and systems, Bioinformatics and Bioengineering, Computational finance and Computational economics, Data mining, Machine learning, and Expert systems. ""Computational Intelligence in Optimization"" is a comprehensive reference for researchers, prac

  5. Competitive Intelligence HF Czechforge

    OpenAIRE

    Nejtek, Petr

    2012-01-01

    This diploma thesis focuses on options of Competitive Intelligence solutions in small and medium enterprises. Applied part is conducted in a medium sized manufacturing company. Theoretical part of this thesis introduces areas of Competitive Intelligence and Business Intelligence, basic technological overview and illustrates Competitive Intelligence cycle description. In Czech republic, majority of companies are in a form of a small or medium enterprise, therefore theoretical definition is pro...

  6. Construct of emotional intelligence

    Directory of Open Access Journals (Sweden)

    Sonja Pečjak in Andreja Avsec

    2003-04-01

    Full Text Available The article highlights the construct of emotional intelligence, that has appeared about then years ago. We present the popular and scientific comprehension of emotional intelligence, briefly describe the development of the concept and than in detail we propose the existing comprehension of emotional intelligence: through the models of Goleman (1995 and Bar-On (1997 we present the comprehension of emotional intelligence as a non-cognitive (personality traits.

  7. Multi-Path Guided Wave Imaging for Inspection and Monitoring of Large, Complex Structures Project

    Data.gov (United States)

    National Aeronautics and Space Administration — There is a well-recognized need within NASA and the aerospace community at large for rapid and reliable methods for inspection of large, complex structures. This...

  8. Orchestrating Multiple Intelligences

    Science.gov (United States)

    Moran, Seana; Kornhaber, Mindy; Gardner, Howard

    2006-01-01

    Education policymakers often go astray when they attempt to integrate multiple intelligences theory into schools, according to the originator of the theory, Howard Gardner, and his colleagues. The greatest potential of a multiple intelligences approach to education grows from the concept of a profile of intelligences. Each learner's intelligence…

  9. Collective Intelligence in Crises

    DEFF Research Database (Denmark)

    Büscher, Monika; Liegl, Michael; Thomas, Vanessa

    2014-01-01

    . By examining these dynamics with the concept of social collective intelligence, important opportunities and challenges can be examined. In this chapter we focus on socio-technical aspects of social collective intelligence in crises to discuss positive and negative frictions and avenues for innovation....... Of particular interest are ways of bridging between collective intelligence in crises and official emergency response efforts....

  10. Designing with computational intelligence

    CERN Document Server

    Lopes, Heitor; Mourelle, Luiza

    2017-01-01

    This book discusses a number of real-world applications of computational intelligence approaches. Using various examples, it demonstrates that computational intelligence has become a consolidated methodology for automatically creating new competitive solutions to complex real-world problems. It also presents a concise and efficient synthesis of different systems using computationally intelligent techniques.

  11. RAPID INSPECTION OF PAVEMENT MARKINGS USING MOBILE LIDAR POINT CLOUDS

    Directory of Open Access Journals (Sweden)

    H. Zhang

    2016-06-01

    Full Text Available This study aims at building a robust semi-automated pavement marking extraction workflow based on the use of mobile LiDAR point clouds. The proposed workflow consists of three components: preprocessing, extraction, and classification. In preprocessing, the mobile LiDAR point clouds are converted into the radiometrically corrected intensity imagery of the road surface. Then the pavement markings are automatically extracted with the intensity using a set of algorithms, including Otsu’s thresholding, neighbor-counting filtering, and region growing. Finally, the extracted pavement markings are classified with the geometric parameters using a manually defined decision tree. Case studies are conducted using the mobile LiDAR dataset acquired in Xiamen (Fujian, China with different road environments by the RIEGL VMX-450 system. The results demonstrated that the proposed workflow and our software tool can achieve 93% in completeness, 95% in correctness, and 94% in F-score when using Xiamen dataset.

  12. Inter-cooperative collective intelligence techniques and applications

    CERN Document Server

    Bessis, Nik

    2014-01-01

    This book covers the latest advances in the rapid growing field of inter-cooperative collective intelligence aiming the integration and cooperation of various computational resources, networks and intelligent processing paradigms to collectively build intelligence and advanced decision support and interfaces for end-users. The book brings a comprehensive view of the state-of-the-art in the field of integration of sensor networks, IoT and Cloud computing, massive and intelligent querying and processing of data. As a result, the book presents lessons learned so far and identifies new research issues, challenges and opportunities for further research and development agendas. Emerging areas of applications are also identified and usefulness of inter-cooperative collective intelligence is envisaged.   Researchers, software developers, practitioners and students interested in the field of inter-cooperative collective intelligence will find the comprehensive coverage of this book useful for their research, academic...

  13. Artificial intelligence in the materials processing laboratory

    Science.gov (United States)

    Workman, Gary L.; Kaukler, William F.

    1990-01-01

    Materials science and engineering provides a vast arena for applications of artificial intelligence. Advanced materials research is an area in which challenging requirements confront the researcher, from the drawing board through production and into service. Advanced techniques results in the development of new materials for specialized applications. Hand-in-hand with these new materials are also requirements for state-of-the-art inspection methods to determine the integrity or fitness for service of structures fabricated from these materials. Two problems of current interest to the Materials Processing Laboratory at UAH are an expert system to assist in eddy current inspection of graphite epoxy components for aerospace and an expert system to assist in the design of superalloys for high temperature applications. Each project requires a different approach to reach the defined goals. Results to date are described for the eddy current analysis, but only the original concepts and approaches considered are given for the expert system to design superalloys.

  14. Intelligence Quotient and Intelligence Grade of Artificial Intelligence

    OpenAIRE

    LIU, Feng; Shi, Yong; Liu, Ying

    2017-01-01

    Although artificial intelligence is currently one of the most interesting areas in scientific research, the potential threats posed by emerging AI systems remain a source of persistent controversy. To address the issue of AI threat, this study proposes a standard intelligence model that unifies AI and human characteristics in terms of four aspects of knowledge, i.e., input, output, mastery, and creation. Using this model, we observe three challenges, namely, expanding of the von Neumann archi...

  15. Paradigms of Intelligent Systems

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available This paper approaches the subject of paradigms for the categories of intelligent systems. First we can look at the term paradigm in its scientific meaning and then we make acquaintance with the main categories of intelligent systems (expert systems, intelligent systems based on genetic algorithms, artificial neuronal systems, fuzzy systems, hybrid intelligent systems. We will see that every system has one or more paradigms, but hybrid intelligent systems combine paradigms because they are made of different technologies. This research has been made under the guidance of Dr. Ioan AND ONE, Professor and Director of Research Laboratory.

  16. Visual inspection for CTBT verification

    Energy Technology Data Exchange (ETDEWEB)

    Hawkins, W.; Wohletz, K.

    1997-03-01

    On-site visual inspection will play an essential role in future Comprehensive Test Ban Treaty (CTBT) verification. Although seismic and remote sensing techniques are the best understood and most developed methods for detection of evasive testing of nuclear weapons, visual inspection can greatly augment the certainty and detail of understanding provided by these more traditional methods. Not only can visual inspection offer ``ground truth`` in cases of suspected nuclear testing, but it also can provide accurate source location and testing media properties necessary for detailed analysis of seismic records. For testing in violation of the CTBT, an offending party may attempt to conceal the test, which most likely will be achieved by underground burial. While such concealment may not prevent seismic detection, evidence of test deployment, location, and yield can be disguised. In this light, if a suspicious event is detected by seismic or other remote methods, visual inspection of the event area is necessary to document any evidence that might support a claim of nuclear testing and provide data needed to further interpret seismic records and guide further investigations. However, the methods for visual inspection are not widely known nor appreciated, and experience is presently limited. Visual inspection can be achieved by simple, non-intrusive means, primarily geological in nature, and it is the purpose of this report to describe the considerations, procedures, and equipment required to field such an inspection.

  17. Social intelligence, human intelligence and niche construction.

    Science.gov (United States)

    Sterelny, Kim

    2007-04-29

    This paper is about the evolution of hominin intelligence. I agree with defenders of the social intelligence hypothesis in thinking that externalist models of hominin intelligence are not plausible: such models cannot explain the unique cognition and cooperation explosion in our lineage, for changes in the external environment (e.g. increasing environmental unpredictability) affect many lineages. Both the social intelligence hypothesis and the social intelligence-ecological complexity hybrid I outline here are niche construction models. Hominin evolution is hominin response to selective environments that earlier hominins have made. In contrast to social intelligence models, I argue that hominins have both created and responded to a unique foraging mode; a mode that is both social in itself and which has further effects on hominin social environments. In contrast to some social intelligence models, on this view, hominin encounters with their ecological environments continue to have profound selective effects. However, though the ecological environment selects, it does not select on its own. Accidents and their consequences, differential success and failure, result from the combination of the ecological environment an agent faces and the social features that enhance some opportunities and suppress others and that exacerbate some dangers and lessen others. Individuals do not face the ecological filters on their environment alone, but with others, and with the technology, information and misinformation that their social world provides.

  18. Innovative issues in intelligent systems

    CERN Document Server

    Yager, Ronald; Kacprzyk, Janusz; Jotsov, Vladimir

    2016-01-01

    This book presents a broad variety of different contemporary IT methods and applications in Intelligent Systems is displayed. Every book chapter represents a detailed, specific, far reaching and original re-search in a respective scientific and practical field. However, all of the chapters share the common point of strong similarity in a sense of being innovative, applicable and mutually compatible with each other. In other words, the methods from the different chapters can be viewed as bricks for building the next generation “thinking machines” as well as for other futuristic logical applications that are rapidly changing our world nowadays.

  19. Caltrans bridge inspection aerial robot.

    Science.gov (United States)

    2008-10-01

    The California Department of Transportation (Caltrans) project resulted in the development of a twin-motor, : single duct, electric-powered Aerobot designed of carrying video cameras up to 200 feet in elevation to enable : close inspection of bridges...

  20. Current Issues regarding Labour Inspection

    Directory of Open Access Journals (Sweden)

    Răzvan Radu POPESCU

    2012-08-01

    Full Text Available Objectives: Labour inspection is the most important specialized organ of the state for intervention and control in the sphere of the work relations. In any state of law, it is impossible for a labour relation to occur, to attempt the eradication of the “black work”, to protect the employees’ interests, to monitor the observance of the legal and/or contractual provisions, without regulating the institution of labour inspection. Prior Work: I've tried to find the new regulation in this domain very important for those who practice labour law. Results: In the Romanian legislation, the enforcement of the court decisions in the matter of labour inspection is viewed by the lawmaker with great care, in certain cases the non-execution of a court decision being considered a felony. Value: We think this article is a small step in the disclosure of the problem eraised by the labour inspection.

  1. Sea bed mapping and inspection

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    The conference has 24 presentations on the topics: Sea bed mapping, inspection, positioning, hydrography, marine archaeology, remote operation vehicles and computerized simulation technologies, oil field activities and plans, technological experiences and problems. (tk)

  2. Allegheny County Commercial Vehicle Inspections

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — This dataset lists the locations and results of all commercial vehicle inspections performed by the Allegheny County Police Motor Carrier Safety Assistance Program...

  3. Construction inspection manual of procedures

    Science.gov (United States)

    2009-01-01

    This manual provides highway construction personnel with relevant, practical information in order to perform accurate inspections and provide relevant construction procedural information for the various roadway and structures items of work. It is the...

  4. Multifamily Housing Physical Inspection Scores

    Data.gov (United States)

    Department of Housing and Urban Development — HUD's Real Estate Assessment Center conducts physical property inspections of properties that are owned, insured or subsidized by HUD, including public housing and...

  5. Public Housing Physical Inspection Scores

    Data.gov (United States)

    Department of Housing and Urban Development — HUD's Real Estate Assessment Center conducts physical property inspections of properties that are owned, insured or subsidized by HUD, including public housing and...

  6. MINI-UAV LIDAR FOR POWER LINE INSPECTION

    Directory of Open Access Journals (Sweden)

    G. E. Teng

    2017-09-01

    Full Text Available Light detection and ranging (LIDAR system based on unmanned aerial vehicles (UAVs recently are in rapid advancement, meanwhile portable and flexible mini-UAV-borne laser scanners have been a hot research field, especially for the complex terrain survey in the mountains and other areas. This study proposes a power line inspection system solution based on mini-UAV-borne LIDAR system–AOEagle, developed by Academy of Opto-Electronics, Chinese Academy of Sciences, which mounted on a Multi-rotor unmanned aerial vehicle for complex terrain survey according to real test. Furthermore, the point cloud data was explored to validate its applicability for power line inspection, in terms of corridor and line laser point clouds; deformation detection of power towers, etc. The feasibility and advantages of AOEagle have been demonstrated by the promising results based on the real-measured data in the field of power line inspection.

  7. Agile Machining and Inspection Non-Nuclear Report (NNR) Project

    Energy Technology Data Exchange (ETDEWEB)

    Lazarus, Lloyd

    2009-02-19

    This report is a high level summary of the eight major projects funded by the Agile Machining and Inspection Non-Nuclear Readiness (NNR) project (FY06.0422.3.04.R1). The largest project of the group is the Rapid Response project in which the six major sub categories are summarized. This project focused on the operations of the machining departments that will comprise Special Applications Machining (SAM) in the Kansas City Responsive Infrastructure Manufacturing & Sourcing (KCRIMS) project. This project was aimed at upgrading older machine tools, developing new inspection tools, eliminating Classified Removable Electronic Media (CREM) in the handling of classified Numerical Control (NC) programs by installing the CRONOS network, and developing methods to automatically load Coordinated-Measuring Machine (CMM) inspection data into bomb books and product score cards. Finally, the project personnel leaned perations of some of the machine tool cells, and now have the model to continue this activity.

  8. Nondestructive Evaluation (NDE) for Inspection of Composite Sandwich Structures

    Science.gov (United States)

    Zalameda, Joseph N.; Parker, F. Raymond

    2014-01-01

    Composite honeycomb structures are widely used in aerospace applications due to their low weight and high strength advantages. Developing nondestructive evaluation (NDE) inspection methods are essential for their safe performance. Flash thermography is a commonly used technique for composite honeycomb structure inspections due to its large area and rapid inspection capability. Flash thermography is shown to be sensitive for detection of face sheet impact damage and face sheet to core disbond. Data processing techniques, using principal component analysis to improve the defect contrast, are discussed. Limitations to the thermal detection of the core are investigated. In addition to flash thermography, X-ray computed tomography is used. The aluminum honeycomb core provides excellent X-ray contrast compared to the composite face sheet. The X-ray CT technique was used to detect impact damage, core crushing, and skin to core disbonds. Additionally, the X-ray CT technique is used to validate the thermography results.

  9. 24 CFR 983.103 - Inspecting units.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Inspecting units. 983.103 Section... PROJECT-BASED VOUCHER (PBV) PROGRAM Dwelling Units § 983.103 Inspecting units. (a) Pre-selection.... (2) Inspection of existing units. If the units to be assisted already exist, the PHA must inspect all...

  10. 23 CFR 650.311 - Inspection frequency.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Inspection frequency. 650.311 Section 650.311 Highways..., STRUCTURES, AND HYDRAULICS National Bridge Inspection Standards § 650.311 Inspection frequency. (a) Routine... level and frequency to which these bridges are inspected considering such factors as age, traffic...

  11. Transition from intelligence cycle to intelligence process: the network-centric intelligence in narrow seas

    Science.gov (United States)

    Büker, Engin

    2015-05-01

    The defence technologies which have been developing and changing rapidly, today make it difficult to be able to foresee the next environment and spectrum of warfare. When said change and development is looked in specific to the naval operations, it can be said that the possible battlefield and scenarios to be developed in the near and middle terms (5-20 years) are more clarified with compare to other force components. Network Centric Naval Warfare Concept that was developed for the floating, diving and flying fleet platforms which serves away from its own mainland for miles, will keep its significance in the future. Accordingly, Network Centric Intelligence structure completely integrating with the command and control systems will have relatively more importance. This study will firstly try to figure out the transition from the traditional intelligence cycle that is still used in conventional war to Network Centric Intelligence Production Process. In the last part, the use of this new approach on the base of UAV that is alternative to satellite based command control and data transfer systems in the joint operations in narrow seas will be examined, a model suggestion for the use of operative and strategic UAVs which are assured within the scope of the NATO AGS2 for this aim will be brought.

  12. A study of defects on EUV mask using blank inspection, patterned mask inspection, and wafer inspection

    Energy Technology Data Exchange (ETDEWEB)

    Huh, S.; Ren, L.; Chan, D.; Wurm, S.; Goldberg, K. A.; Mochi, I.; Nakajima, T.; Kishimoto, M.; Ahn, B.; Kang, I.; Park, J.-O.; Cho, K.; Han, S.-I.; Laursen, T.

    2010-03-12

    The availability of defect-free masks remains one of the key challenges for inserting extreme ultraviolet lithography (EUVL) into high volume manufacturing. yet link data is available for understanding native defects on real masks. In this paper, a full-field EUV mask is fabricated to investigate the printability of various defects on the mask. The printability of defects and identification of their source from mask fabrication to handling were studied using wafer inspection. The printable blank defect density excluding particles and patterns is 0.63 cm{sup 2}. Mask inspection is shown to have better sensitivity than wafer inspection. The sensitivity of wafer inspection must be improved using through-focus analysis and a different wafer stack.

  13. Intelligence analysis – the royal discipline of Competitive Intelligence

    National Research Council Canada - National Science Library

    Bartes, František

    ... cycle’s specific area, in the so-called “Intelligence Analysis”. Intelligence Analysis is one of the stages of the Intelligence Cycle in which data from both the primary and secondary research are analyzed...

  14. ROBOTIC TANK INSPECTION END EFFECTOR

    Energy Technology Data Exchange (ETDEWEB)

    Rachel Landry

    1999-10-01

    The objective of this contract between Oceaneering Space Systems (OSS) and the Department of Energy (DOE) was to provide a tool for the DOE to inspect the inside tank walls of underground radioactive waste storage tanks in their tank farms. Some of these tanks are suspected to have leaks, but the harsh nature of the environment within the tanks precludes human inspection of tank walls. As a result of these conditions only a few inspection methods can fulfill this task. Of the methods available, OSS chose to pursue Alternating Current Field Measurement (ACFM), because it does not require clean surfaces for inspection, nor any contact with the Surface being inspected, and introduces no extra by-products in the inspection process (no coupling fluids or residues are left behind). The tool produced by OSS is the Robotic Tank Inspection End Effector (RTIEE), which is initially deployed on the tip of the Light Duty Utility Arm (LDUA). The RTEE combines ACFM with a color video camera for both electromagnetic and visual inspection The complete package consists of an end effector, its corresponding electronics and software, and a user's manual to guide the operator through an inspection. The system has both coarse and fine inspection modes and allows the user to catalog defects and suspected areas of leakage in a database for further examination, which may lead to emptying the tank for repair, decommissioning, etc.. The following is an updated report to OSS document OSS-21100-7002, which was submitted in 1995. During the course of the contract, two related subtasks arose, the Wall and Coating Thickness Sensor and the Vacuum Scarifying and Sampling Tool Assembly. The first of these subtasks was intended to evaluate the corrosion and wall thinning of 55-gallon steel drums. The second was retrieved and characterized the waste material trapped inside the annulus region of the underground tanks on the DOE's tank farms. While these subtasks were derived from the original

  15. 75 FR 81965 - Grain Inspection Advisory Committee Reestablishment

    Science.gov (United States)

    2010-12-29

    ... Grain Inspection, Packers and Stockyards Administration Grain Inspection Advisory Committee Reestablishment AGENCY: Grain Inspection, Packers and Stockyards Administration, USDA. ACTION: Notice to... Grain Inspection, Packers and Stockyards Administration (GIPSA) Grain Inspection Advisory Committee...

  16. Intelligence analysis – the royal discipline of Competitive Intelligence

    OpenAIRE

    František Bartes

    2011-01-01

    The aim of this article is to propose work methodology for Competitive Intelligence teams in one of the intelligence cycle’s specific area, in the so-called “Intelligence Analysis”. Intelligence Analysis is one of the stages of the Intelligence Cycle in which data from both the primary and secondary research are analyzed. The main result of the effort is the creation of added value for the information collected. Company Competiitve Intelligence, correctly understood and implemented in busines...

  17. On what intelligence is.

    Science.gov (United States)

    Howard, R W

    1993-02-01

    Despite much controversy over the exact definition of intelligence, most researchers agree that it is a concept labelled by a word, or even several related concepts labelled by a word. The present study applies recent theorizing about the nature of concepts in general to clarify the notion (or notions) of intelligence. This theorizing defines a concept as a person's unique and individual information about a category and a category as a set of things in the world. An example of a concept/category pair is 'dog', with the category being the set of all dogs and an individual's concept of dog being his or her personal knowledge of dogs. This knowledge can be used to place things in or out of the category. Different individuals may have somewhat different knowledge about the same category and a single word may label several different concept/category pairs. A concept of intelligence thus consists of information about a general category labelled by the word 'intelligence'. This study analyses three major concept/category pairs of 'intelligence': (1) Spearman's g; (2) intelligence as a property of behaviour; and (3) intelligence as a set of abilities. Each concept contains different information, refers to a different category, and should be used in different ways. Several recurrent issues, such as whether the word 'intelligence' refers to a thing and what things are intelligent (e.g. animals, computers), can be resolved by considering each issue in relation to these concept/category pairs. For instance, the word 'intelligence' refers to a thing only if one uses the g concept. Similarly, only humans are intelligent according to the g concept but animals and computers may be considered intelligent if the other concepts are applied. Recent theorizing on the nature of concepts can be used to clarify other important psychological notions.

  18. Intelligence and chess

    OpenAIRE

    Gobet, F.; Campitelli, G

    2002-01-01

    The goal of this paper is to critically evaluate the evidence supporting the hypothesis that innate talent (for example a higher level of intelligence) may account for aspects of chess skill. We start by giving some standard definitions of intelligence, and then present empirical data on chessplayers’ intelligence, both with children and adults. In the second part of this paper, we discuss Geschwind and Galaburda’s (1985) influential theory of the neurobiology of talent in music, mathematics,...

  19. Principles of artificial intelligence

    CERN Document Server

    Nilsson, Nils J

    1980-01-01

    A classic introduction to artificial intelligence intended to bridge the gap between theory and practice, Principles of Artificial Intelligence describes fundamental AI ideas that underlie applications such as natural language processing, automatic programming, robotics, machine vision, automatic theorem proving, and intelligent data retrieval. Rather than focusing on the subject matter of the applications, the book is organized around general computational concepts involving the kinds of data structures used, the types of operations performed on the data structures, and the properties of th

  20. Supporting tactical intelligence using collaborative environments and social networking

    Science.gov (United States)

    Wollocko, Arthur B.; Farry, Michael P.; Stark, Robert F.

    2013-05-01

    Modern military environments place an increased emphasis on the collection and analysis of intelligence at the tactical level. The deployment of analytical tools at the tactical level helps support the Warfighter's need for rapid collection, analysis, and dissemination of intelligence. However, given the lack of experience and staffing at the tactical level, most of the available intelligence is not exploited. Tactical environments are staffed by a new generation of intelligence analysts who are well-versed in modern collaboration environments and social networking. An opportunity exists to enhance tactical intelligence analysis by exploiting these personnel strengths, but is dependent on appropriately designed information sharing technologies. Existing social information sharing technologies enable users to publish information quickly, but do not unite or organize information in a manner that effectively supports intelligence analysis. In this paper, we present an alternative approach to structuring and supporting tactical intelligence analysis that combines the benefits of existing concepts, and provide detail on a prototype system embodying that approach. Since this approach employs familiar collaboration support concepts from social media, it enables new-generation analysts to identify the decision-relevant data scattered among databases and the mental models of other personnel, increasing the timeliness of collaborative analysis. Also, the approach enables analysts to collaborate visually to associate heterogeneous and uncertain data within the intelligence analysis process, increasing the robustness of collaborative analyses. Utilizing this familiar dynamic collaboration environment, we hope to achieve a significant reduction of time and skill required to glean actionable intelligence in these challenging operational environments.

  1. Intelligent Navigation for a Solar Powered Unmanned Underwater Vehicle

    OpenAIRE

    Francisco García-Córdova; Antonio Guerrero-González

    2013-01-01

    In this paper, an intelligent navigation system for an unmanned underwater vehicle powered by renewable energy and designed for shadow water inspection in missions of a long duration is proposed. The system is composed of an underwater vehicle, which tows a surface vehicle. The surface vehicle is a small boat with photovoltaic panels, a methanol fuel cell and communication equipment, which provides energy and communication to the underwater vehicle. The underwater v...

  2. The search for intelligence

    Science.gov (United States)

    Coffey, E. J.

    1980-12-01

    Implications of current understandings of the nature of human intelligence for the possibility of extraterrestrial intelligence are discussed. The perceptual theory of intelligence as the manipulation of perceptual images rather than language is introduced, and conditions leading to the ascendancy of man over other hominids with similar conceptual abilities are discussed, including the liberation of the hands from a locomotive function and the evolution of neoteny. It is argued that the specificity of the environmental, behavioral and physiological conditions which lead to the emergence of technologically oriented, and communicative intelligent creatures suggests that any SETI would most likely be fruitless.

  3. Machine listening intelligence

    Science.gov (United States)

    Cella, C. E.

    2017-05-01

    This manifesto paper will introduce machine listening intelligence, an integrated research framework for acoustic and musical signals modelling, based on signal processing, deep learning and computational musicology.

  4. Intelligent Optics Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Intelligent Optics Laboratory supports sophisticated investigations on adaptive and nonlinear optics; advancedimaging and image processing; ground-to-ground and...

  5. Artificial Intelligence Education

    National Research Council Canada - National Science Library

    Michael Wollowski; Todd Neller; James Boerkoel

    2017-01-01

    .... The article Ethical Considerations in Artificial Intelligence Courses by Emanuelle Burton, Judy Goldsmith, Sven Koenig, Benjamin Kuipers, Nicholas Mattei, and Toby Walsh is concerned with providing...

  6. Development of inspection robots for bridge cables.

    Science.gov (United States)

    Yun, Hae-Bum; Kim, Se-Hoon; Wu, Liuliu; Lee, Jong-Jae

    2013-01-01

    This paper presents the bridge cable inspection robot developed in Korea. Two types of the cable inspection robots were developed for cable-suspension bridges and cable-stayed bridge. The design of the robot system and performance of the NDT techniques associated with the cable inspection robot are discussed. A review on recent advances in emerging robot-based inspection technologies for bridge cables and current bridge cable inspection methods is also presented.

  7. Development of Inspection Robots for Bridge Cables

    Directory of Open Access Journals (Sweden)

    Hae-Bum Yun

    2013-01-01

    Full Text Available This paper presents the bridge cable inspection robot developed in Korea. Two types of the cable inspection robots were developed for cable-suspension bridges and cable-stayed bridge. The design of the robot system and performance of the NDT techniques associated with the cable inspection robot are discussed. A review on recent advances in emerging robot-based inspection technologies for bridge cables and current bridge cable inspection methods is also presented.

  8. Successful intelligence: A model for testing intelligence beyond IQ tests

    National Research Council Canada - National Science Library

    Sternberg, Robert J

    2015-01-01

    .... In contrast, the augmented theory of successful intelligence asserts that intelligence involves creative skills in producing new ideas, analytical skills in evaluating whether the ideas are good ones...

  9. Routledge companion to intelligence studies

    CERN Document Server

    Dover, Robert; Hillebrand, Claudia

    2013-01-01

    The Routledge Companion to Intelligence Studies provides a broad overview of the growing field of intelligence studies. The recent growth of interest in intelligence and security studies has led to an increased demand for popular depictions of intelligence and reference works to explain the architecture and underpinnings of intelligence activity. Divided into five comprehensive sections, this Companion provides a strong survey of the cutting-edge research in the field of intelligence studies: Part I: The evolution of intelligence studies; Part II: Abstract approaches to intelligence; Part III: Historical approaches to intelligence; Part IV: Systems of intelligence; Part V: Contemporary challenges. With a broad focus on the origins, practices and nature of intelligence, the book not only addresses classical issues, but also examines topics of recent interest in security studies. The overarching aim is to reveal the rich tapestry of intelligence studies in both a sophisticated and accessible way. This Companion...

  10. Digital Camera Control for Faster Inspection

    Science.gov (United States)

    Brown, Katharine; Siekierski, James D.; Mangieri, Mark L.; Dekome, Kent; Cobarruvias, John; Piplani, Perry J.; Busa, Joel

    2009-01-01

    Digital Camera Control Software (DCCS) is a computer program for controlling a boom and a boom-mounted camera used to inspect the external surface of a space shuttle in orbit around the Earth. Running in a laptop computer in the space-shuttle crew cabin, DCCS commands integrated displays and controls. By means of a simple one-button command, a crewmember can view low- resolution images to quickly spot problem areas and can then cause a rapid transition to high- resolution images. The crewmember can command that camera settings apply to a specific small area of interest within the field of view of the camera so as to maximize image quality within that area. DCCS also provides critical high-resolution images to a ground screening team, which analyzes the images to assess damage (if any); in so doing, DCCS enables the team to clear initially suspect areas more quickly than would otherwise be possible and further saves time by minimizing the probability of re-imaging of areas already inspected. On the basis of experience with a previous version (2.0) of the software, the present version (3.0) incorporates a number of advanced imaging features that optimize crewmember capability and efficiency.

  11. 13th International Conference Intelligent Autonomous Systems

    CERN Document Server

    Michael, Nathan; Berns, Karsten; Yamaguchi, Hiroaki

    2016-01-01

    This book describes the latest research accomplishments, innovations, and visions in the field of robotics as presented at the 13th International Conference on Intelligent Autonomous Systems (IAS), held in Padua in July 2014, by leading researchers, engineers, and practitioners from across the world. The contents amply confirm that robots, machines, and systems are rapidly achieving intelligence and autonomy, mastering more and more capabilities such as mobility and manipulation, sensing and perception, reasoning, and decision making. A wide range of research results and applications are covered, and particular attention is paid to the emerging role of autonomous robots and intelligent systems in industrial production, which reflects their maturity and robustness. The contributions have been selected through a rigorous peer-review process and contain many exciting and visionary ideas that will further galvanize the research community, spurring novel research directions. The series of biennial IAS conferences ...

  12. 75 FR 76423 - Defense Intelligence Agency National Defense Intelligence College Board of Visitors Closed Meeting

    Science.gov (United States)

    2010-12-08

    ... of the Secretary Defense Intelligence Agency National Defense Intelligence College Board of Visitors Closed Meeting AGENCY: National Defense Intelligence College, Defense Intelligence Agency, Department of... a closed meeting of the Defense Intelligence Agency National Defense Intelligence College Board of...

  13. 76 FR 28960 - Defense Intelligence Agency National Defense Intelligence College Board of Visitors Closed Meeting

    Science.gov (United States)

    2011-05-19

    ... of the Secretary Defense Intelligence Agency National Defense Intelligence College Board of Visitors Closed Meeting AGENCY: National Defense Intelligence College, Defense Intelligence Agency, Department of... a closed meeting of the Defense Intelligence Agency National Defense Intelligence College Board of...

  14. 77 FR 32952 - Defense Intelligence Agency National Intelligence University Board of Visitors Closed Meeting

    Science.gov (United States)

    2012-06-04

    ... of the Secretary Defense Intelligence Agency National Intelligence University Board of Visitors Closed Meeting AGENCY: Department of Defense, Defense Intelligence Agency, National Intelligence... a closed meeting of the Defense Intelligence Agency National Intelligence University Board of...

  15. National Intelligence: A Consumer’s Guide

    Science.gov (United States)

    2009-01-01

    Intelligence Analysis 14 The Intelligence Cycle 17 Prioritizing Intelligence Issues...Office of Intelligence and Counterintelligence 47 Department of Homeland Security Office of Intelligence & Analysis 48...Research Treasury Office of Intelligence and Analysis DHS Office of Intelligence & Analysis SERVICES Marine Corps Intelligence Coast Guard

  16. 2015 Chinese Intelligent Systems Conference

    CERN Document Server

    Du, Junping; Li, Hongbo; Zhang, Weicun; CISC’15

    2016-01-01

    This book presents selected research papers from the 2015 Chinese Intelligent Systems Conference (CISC’15), held in Yangzhou, China. The topics covered include multi-agent systems, evolutionary computation, artificial intelligence, complex systems, computation intelligence and soft computing, intelligent control, advanced control technology, robotics and applications, intelligent information processing, iterative learning control, and machine learning. Engineers and researchers from academia, industry and the government can gain valuable insights into solutions combining ideas from multiple disciplines in the field of intelligent systems.

  17. Vision Guided X-Y Table For Inspection

    Science.gov (United States)

    Chen, Michel J.

    1983-05-01

    This paper demonstrates an example of utilization of machine intelligence in automation. A system was developed to perform precision part inspection and automated workpiece handling. This system consists of a robot which is utilized to perform simple pick-and-place function, a MI VS-110 machine vision system which provides a vision library and the functions of masking and programmable image overlay, and an X-Y-θ table. This setup demonstrates a simplified approach to machine vision and automation. In this complete sensorimotor system, BASIC was the programming language to develop and integrate the control software for the inspection process by using the MI DS-100 machine vision development system. By calling vision functions, X-Y-θ table commands and simple robot commands, the task of parts" inspection under high- and low-resolution cameras, sorting, as well as disposition is shown to be easy to conceptualize and implement. This robot system can perform tasks without the necessity of prealigning or jigging workpieces. Numerous other applications can be accomplished by adopting a similar methodology.

  18. Spiritual Intelligence: The Tenth Intelligence that Integrates All Other Intelligences.

    Science.gov (United States)

    Sisk, Dorothy

    2002-01-01

    This article discusses seven ways to develop spiritual intelligence, including: think about goals and identify values; access inner processes and use visualization to see goals fulfilled; integrate personal and universal vision; take responsibility for goals; develop a sense of community; focus on love and compassion; and take advantages of…

  19. Artificial intelligence and intelligent tutoring systems

    Energy Technology Data Exchange (ETDEWEB)

    Livergood, N.D.

    1989-01-01

    As a species we have evolved by increasing our mental and physical powers through the deliberate development and use of instruments that amplify our inherent capabilities. Whereas hereditarily given instincts predetermine the actions of lower animal forms, human existence begins with freedom. As humans we can choose what actions we will perform. We have invented a technology called education to prepare ourselves for life. At present, our educational structures and procedures are failing to prepare us efficiently for the demands of modern life. One of the most important new technologies, in relation to human development, is the digital computer. This dissertation proposes that artificial intelligence maintain a highly critical technological awareness. Artificial intelligence, because of its origin as a politically sponsored field of investigation, must strive for constant awareness of its place within the larger political-economic world and its possible misuse by factions intent on manipulation and control. Computerized models of the human mind could be used in developing progressively more sophisticated brainwashing systems. Intelligent tutoring systems comprise an important new technology within the field of artificial intelligence. This dissertation explores specification and design procedures, functions and issues in developing intelligent tutoring systems.

  20. A Survey on Evolutionary Algorithm Based Hybrid Intelligence in Bioinformatics

    Directory of Open Access Journals (Sweden)

    Shan Li

    2014-01-01

    Full Text Available With the rapid advance in genomics, proteomics, metabolomics, and other types of omics technologies during the past decades, a tremendous amount of data related to molecular biology has been produced. It is becoming a big challenge for the bioinformatists to analyze and interpret these data with conventional intelligent techniques, for example, support vector machines. Recently, the hybrid intelligent methods, which integrate several standard intelligent approaches, are becoming more and more popular due to their robustness and efficiency. Specifically, the hybrid intelligent approaches based on evolutionary algorithms (EAs are widely used in various fields due to the efficiency and robustness of EAs. In this review, we give an introduction about the applications of hybrid intelligent methods, in particular those based on evolutionary algorithm, in bioinformatics. In particular, we focus on their applications to three common problems that arise in bioinformatics, that is, feature selection, parameter estimation, and reconstruction of biological networks.

  1. On Site Inspection Radionuclide Measurements

    Science.gov (United States)

    Hayes, J. C.; Haas, D.; Milbrath, B. D.; Miley, H.; Seifert, C. E.

    2013-12-01

    The goal of an On Site Inspection for the CTBT is the clarification of the nature of a triggering event - probably a seismic signal. After a request for inspection is made and accepted, an inspection team proceeds to the environs of the triggering event and uses visual, seismic, radiological, or other location-finding methods to narrow down the search area. Survey, environmental sampling, and field-lab measurement methods then are used to try to collect definitive facts to support decisions of an Executive Council of the Treaty. Refining and optimizing the science methods for practical survey, sampling, and measurement requires reasonable measurement objectives to be stated. The authors will present a few scenario-dependant objectives such that the field approaches and equipment specifications could follow.

  2. Applying Multiple Intelligences

    Science.gov (United States)

    Christodoulou, Joanna A.

    2009-01-01

    The ideas of multiple intelligences introduced by Howard Gardner of Harvard University more than 25 years ago have taken form in many ways, both in schools and in other sometimes-surprising settings. The silver anniversary of Gardner's learning theory provides an opportunity to reflect on the ways multiple intelligences theory has taken form and…

  3. Next generation Emotional Intelligence

    Science.gov (United States)

    J. Saveland

    2012-01-01

    Emotional Intelligence has been a hot topic in leadership training since Dan Goleman published his book on the subject in 1995. Emotional intelligence competencies are typically focused on recognition and regulation of emotions in one's self and social situations, yielding four categories: self-awareness, self-management, social awareness and relationship...

  4. Can Ai Be Intelligent?

    Directory of Open Access Journals (Sweden)

    Trzęsicki Kazimierz

    2016-12-01

    Full Text Available The aim of this paper is an attempt to give an answer to the question what does it mean that a computational system is intelligent. We base on some theses that though debatable are commonly accepted. Intelligence is conceived as the ability of tractable solving of some problems that in general are not solvable by deterministic Turing Machine.

  5. Systems Intelligence Inventory

    Science.gov (United States)

    Törmänen, Juha; Hämäläinen, Raimo P.; Saarinen, Esa

    2016-01-01

    Purpose: Systems intelligence (SI) (Saarinen and Hämäläinen, 2004) is a construct defined as a person's ability to act intelligently within complex systems involving interaction and feedback. SI relates to our ability to act in systems and reason about systems to adaptively carry out productive actions within and with respect to systems such as…

  6. Towards Intelligent Supply Chains

    DEFF Research Database (Denmark)

    Siurdyban, Artur; Møller, Charles

    2012-01-01

    of deploying inapt operations leading to deterioration of profits. To address this problem, we propose a unified business process design framework based on the paradigm of intelligence. Intelligence allows humans and human-designed systems cope with environmental volatility, and we argue that its principles...

  7. Multiple Intelligences in Action.

    Science.gov (United States)

    Campbell, Bruce

    1992-01-01

    Describes the investigation of the effects of a four-step model program used with third through fifth grade students to implement Gardener's concepts of seven human intelligences--linguistic, logical/mathematical, visual/spatial, musical, kinesthetic, intrapersonal, and interpersonal intelligence--into daily learning. (BB)

  8. A Multiple Intelligence Approach.

    Science.gov (United States)

    Nuzzi, Ronald

    1997-01-01

    Describes multiple intelligence instruction (MII), based on the theory that humans possess seven intelligences: visual, musical, logical-mathematical, intrapersonal, interpersonal, linguistic, and bodily-kinesthetic. Argues that current methods of assessment are deficit-based and, therefore, not helpful in assessing MII students. Describes an…

  9. Cyber Intelligence Threat Prioritization

    Science.gov (United States)

    2014-10-01

    platform that allows anyone to make their organization more visible to threat actors. Online Presence Extracurricular Activities Motive Risk...PURPOSE OR MERCHANTABILITY, EXCLUSIVITY, OR RESULTS OBTAINED FROM USE OF THE MATERIAL. CARNEGIE MELLON UNIVERSITY DOES NOT MAKE ANY WARRANTY OF ANY KIND...Project Sponsor • National Intelligence Manager for Cyber, Office of the Director of National Intelligence (ODNI) Purpose • Study how

  10. The Reproduction of Intelligence

    Science.gov (United States)

    Meisenberg, Gerhard

    2010-01-01

    Although a negative relationship between fertility and education has been described consistently in most countries of the world, less is known about the relationship between intelligence and reproductive outcomes. Also the paths through which intelligence influences reproductive outcomes are uncertain. The present study uses the NLSY79 to analyze…

  11. The Physics of Intelligence

    Science.gov (United States)

    Escultura, E. E.

    2012-01-01

    This paper explores the physics of intelligence and provides an overview of what happens in the brain when a person is engaged in mental activity that we classify under thought or intelligence. It traces the formation of a concept starting with reception of visible or detectable signals from the real world by and external to the sense organs,…

  12. Intelligent design som videnskab?

    DEFF Research Database (Denmark)

    Klausen, Søren Harnow

    2007-01-01

    Diskuterer hvorvidt intelligent design kan betegnes som videnskab; argumenterer for at dette grundet fraværet af klare demarkationskriterier næppe kan afvises.......Diskuterer hvorvidt intelligent design kan betegnes som videnskab; argumenterer for at dette grundet fraværet af klare demarkationskriterier næppe kan afvises....

  13. Ironising with Intelligence

    Science.gov (United States)

    Erlandson, Peter; Beach, Dennis

    2014-01-01

    This article is part of a project that seeks in part to explore how students understand and use the concept of intelligence. It is based on an ethnographically contextualized study of linguistic events and was conducted in an inner-city upper secondary school in Sweden. The article shows that the concept of intelligence is not spontaneously used…

  14. Intelligence and Physical Attractiveness

    Science.gov (United States)

    Kanazawa, Satoshi

    2011-01-01

    This brief research note aims to estimate the magnitude of the association between general intelligence and physical attractiveness with large nationally representative samples from two nations. In the United Kingdom, attractive children are more intelligent by 12.4 IQ points (r=0.381), whereas in the United States, the correlation between…

  15. Computational Intelligence in Intelligent Data Analysis

    CERN Document Server

    Nürnberger, Andreas

    2013-01-01

    Complex systems and their phenomena are ubiquitous as they can be found in biology, finance, the humanities, management sciences, medicine, physics and similar fields. For many problems in these fields, there are no conventional ways to mathematically or analytically solve them completely at low cost. On the other hand, nature already solved many optimization problems efficiently. Computational intelligence attempts to mimic nature-inspired problem-solving strategies and methods. These strategies can be used to study, model and analyze complex systems such that it becomes feasible to handle them. Key areas of computational intelligence are artificial neural networks, evolutionary computation and fuzzy systems. As only a few researchers in that field, Rudolf Kruse has contributed in many important ways to the understanding, modeling and application of computational intelligence methods. On occasion of his 60th birthday, a collection of original papers of leading researchers in the field of computational intell...

  16. Research on Quality Inspection Method of Digital Aerial Photography Results

    OpenAIRE

    Wang, Xiaojun; Li, Yanling; Liang, Yong; Zeng, Yanwei

    2010-01-01

    International audience; Photography is the main access to obtain geospatial information, the quality of the results will directly affect the follow-up results of the quality of surveying and mapping. Therefore, we need a comprehensive aerial photographic quality inspection results. Correct evaluation of the quality of digital images is an important but difficult to solve the research topic. Many of the current image quality evaluation mainly rely on the subjective judgments. With the rapid de...

  17. Intelligence and homosexuality.

    Science.gov (United States)

    Kanazawa, Satoshi

    2012-09-01

    The origin of preferences and values is an unresolved theoretical problem in behavioural sciences. The Savanna-IQ Interaction Hypothesis, derived from the Savanna Principle and a theory of the evolution of general intelligence, suggests that more intelligent individuals are more likely to acquire and espouse evolutionarily novel preferences and values than less intelligent individuals, but general intelligence has no effect on the acquisition and espousal of evolutionarily familiar preferences and values. Ethnographies of traditional societies suggest that exclusively homosexual behaviour was probably rare in the ancestral environment, so the Hypothesis would predict that more intelligent individuals are more likely to identify themselves as homosexual and engage in homosexual behaviour. Analyses of three large, nationally representative samples (two of which are prospectively longitudinal) from two different nations confirm the prediction.

  18. Understanding US National Intelligence

    DEFF Research Database (Denmark)

    Leander, Anna

    2014-01-01

    In July 2010, the Washington Post (WP) published the results of a project on “Top Secret America” on which twenty investigative journalists had been working for two years. The project drew attention to the change and growth in National Intelligence following 9/11 (Washington Post 2010a). The init......In July 2010, the Washington Post (WP) published the results of a project on “Top Secret America” on which twenty investigative journalists had been working for two years. The project drew attention to the change and growth in National Intelligence following 9/11 (Washington Post 2010a......). The initial idea had been to work on intelligence generally, but given that this proved overwhelming, the team narrowed down to focus only on intelligence qualified as “top secret.” Even so, the growth in this intelligence activity is remarkable. This public is returning, or in this case expanding...

  19. Artificial Intelligence, Knowledge Extraction and the Study of Human Intelligence.

    Science.gov (United States)

    d'Ydewalle, Gery; Delhaye, Patrick

    1988-01-01

    Describes artificial intelligence (AI) as the study of intelligence with the ideas and methods of computation. States that the goal is to make computers more intelligent and thereby uncover the principles that make intelligent behavior possible. Discusses knowledge representations, production (if-then) systems, and expert systems as forms of AI.…

  20. Naturalist Intelligence Among the Other Multiple Intelligences [In Bulgarian

    Directory of Open Access Journals (Sweden)

    R. Genkov

    2007-09-01

    Full Text Available The theory of multiple intelligences was presented by Gardner in 1983. The theory was revised later (1999 and among the other intelligences a naturalist intelligence was added. The criteria for distinguishing of the different types of intelligences are considered. While Gardner restricted the analysis of the naturalist intelligence with examples from the living nature only, the present paper considered this problem on wider background including objects and persons of the natural sciences.

  1. Combined Intelligent Control (CIC): An Intelligent decision making algorithm

    OpenAIRE

    Moteaal Asadi Shirzi; M. R. Hairi Yazdi; Caro Lucas

    2008-01-01

    The focus of this research is to introduce the concept of combined intelligent control (CIC) as an effective architecture for decision making and control of intelligent agents and multi robot sets. Basically, the CIC is a combination of various architectures and methods from fields such as artificial intelligence, Distributed Artificial Intelligence (DAI), control and biological computing. Although any intelligent architecture may be very effective for some specific applications, it could be ...

  2. Social Intelligence Design in Ambient Intelligence

    NARCIS (Netherlands)

    Nijholt, Antinus; Stock, Oliviero; Stock, O.; Nishida, T.; Nishida, Toyoaki

    2009-01-01

    This Special Issue of AI and Society contains a selection of papers presented at the 6th Social Intelligence Design Workshop held at ITC-irst, Povo (Trento, Italy) in July 2007. Being the 6th in a series means that there now is a well-established and also a growing research area. The interest in

  3. The Epistemic Status of Intelligence

    DEFF Research Database (Denmark)

    Rønn, Kira Vrist; Høffding, Simon

    2012-01-01

    We argue that the majority of intelligence definitions fail to recognize that the normative epistemic status of intelligence is knowledge and not an inferior alternative. We refute the counter-arguments that intelligence ought not to be seen as knowledge because of 1) its action-oriented scope...... and robustness of claims to intelligence-knowledge can be assessed....

  4. Conceptions of Intelligence and Giftedness.

    Science.gov (United States)

    Bireley, Marlene

    This paper presents a review of the major ideas on the nature of intelligence and giftedness. Especially noted are theories of Howard Gardner, Robert Sternberg, and J.P. Das. Gardner expanded traditional notions of intelligence to include such talents as spatial ability, musical intelligence, bodily-kinesthetic intelligence, and interpersonal and…

  5. Folklore and the Multiple Intelligences.

    Science.gov (United States)

    Koehnecke, Dianne Swenson

    1995-01-01

    Explores using Howard Gardner's multiple intelligences for folklore analysis. States that when listening to folktales, linguistic intelligence was used, as opposed to drawing pictures of the stories, which used spatial intelligence. Provides some ideas on how to bring folklore studies and the use of multiple intelligences into the classroom. (PA)

  6. Moral Intelligence in the Schools

    Science.gov (United States)

    Clarken, Rodney H.

    2009-01-01

    Moral intelligence is newer and less studied than the more established cognitive, emotional and social intelligences, but has great potential to improve our understanding of learning and behavior. Moral intelligence refers to the ability to apply ethical principles to personal goals, values and actions. The construct of moral intelligence consists…

  7. Universities and the Intelligence Community.

    Science.gov (United States)

    Baratz, Morton S.; And Others

    1979-01-01

    Statements before the Senate Select Committee on Intelligence with regard to the National Intelligence Reorganization and Reform Act and the relations of the intelligence agencies to the academic community are reported. Issues include covert recruitment and operational use of academics by the Central Intelligence Agency. (JMD)

  8. Tecnology Development for Robotic Surface Inspection

    Science.gov (United States)

    Volpe, Richard; Balaram, J. Bob

    1994-01-01

    For the past three years at JPL, NASA has been sponsoring the Remote Surface Inspection Project to develop the technology needed for doing periodic and on-demand inspection of space borne platforms, in particular Space Station Freedom.

  9. Machine vision inspection of railroad track

    Science.gov (United States)

    2011-01-10

    North American Railways and the United States Department of Transportation : (US DOT) Federal Railroad Administration (FRA) require periodic inspection of railway : infrastructure to ensure the safety of railway operation. This inspection is a critic...

  10. 7 CFR 51.53 - Continuous inspections.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE REGULATIONS AND STANDARDS UNDER THE AGRICULTURAL MARKETING ACT OF 1946 FRESH FRUITS, VEGETABLES AND OTHER PRODUCTS 1,2 (INSPECTION, CERTIFICATION, AND...

  11. Formal Inspection: A Tool for TQM

    Science.gov (United States)

    Welz, L.; Kelly, J.

    1995-01-01

    The goal of the Formal Inspection Program at the Jet Propulsion Laboratory (JPL) is to support projects wishing to use Formal Inspections to improve the quality of software and system level engineering products.

  12. Allegheny County Housing and Community Environment Inspections

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Residential housing inspections and inspections in response to complaints for community environment problems, such as open vacant structures, vacant lots with...

  13. Automated Ply Inspection (API) for AFP Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The Automated Ply Inspection (API) system autonomously inspects layups created by high speed automated fiber placement (AFP) machines. API comprises a high accuracy...

  14. The evidence base for school inspection frameworks

    NARCIS (Netherlands)

    Scheerens, Jaap; Ehren, Melanie Catharina Margaretha; Ehren, Melanie C.M.

    2016-01-01

    This chapter describes how Inspectorates of Education operationalize different inspection goals (control, improvement, and liaison) in their inspection indicator frameworks. The chapter provides an overview and examples of the indicators used across a number of countries and how these are

  15. Allegheny County Weights and Measures Inspections

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Inspections conducted by the Allegheny County Bureau of Weights and Measures. The Bureau inspects weighing and timing devices such as gas pumps, laundromat timers,...

  16. Genetics of intelligence.

    Science.gov (United States)

    Deary, Ian J; Spinath, Frank M; Bates, Timothy C

    2006-06-01

    This article provides an overview of the biometric and molecular genetic studies of human psychometric intelligence. In the biometric research, special attention is given to the environmental and genetic contributions to specific and general cognitive ability differences, and how these differ from early childhood to old age. Special mention is also made of multivariate studies that examine the genetic correlation between intelligence test scores and their correlates such as processing speed, birth weight and brain size. After an overview of candidate gene associations with intelligence test scores, there is a discussion of whole-genome linkage and association studies, the first of which have only recently appeared.

  17. Dividing Up Intelligence Education

    Directory of Open Access Journals (Sweden)

    Dr. Robert Clark

    2008-01-01

    Full Text Available At this year's annual conference of the International Association for Intelligence Education (IAFIE in Monterey, CA, the keynote speaker posed the question, "How much do you need intelligence education outside the beltway?" Which led to a second question discussed during the conference: "What should such education look like?" In short, what should we be teaching in universities? What should we leave to the intelligence community as training? And what could be done in either or both settings? The first question of any educational effort is:What are we preparing students for?

  18. Intelligent environmental sensing

    CERN Document Server

    Mukhopadhyay, Subhas

    2015-01-01

    Developing environmental sensing and monitoring technologies become essential especially for industries that may cause severe contamination. Intelligent environmental sensing uses novel sensor techniques, intelligent signal and data processing algorithms, and wireless sensor networks to enhance environmental sensing and monitoring. It finds applications in many environmental problems such as oil and gas, water quality, and agriculture. This book addresses issues related to three main approaches to intelligent environmental sensing and discusses their latest technological developments. Key contents of the book include:   Agricultural monitoring Classification, detection, and estimation Data fusion Geological monitoring Motor monitoring Multi-sensor systems Oil reservoirs monitoring Sensor motes Water quality monitoring Wireless sensor network protocol  

  19. Intelligent Car System

    OpenAIRE

    Siddique, Qasim

    2012-01-01

    In modern life the road safety has becomes the core issue. One single move of a driver can cause horrifying accident. The main goal of intelligent car system is to make communication with other cars on the road. The system is able to control to speed, direction and the distance between the cars the intelligent car system is able to recognize traffic light and is able to take decision according to it. This paper presents a framework of the intelligent car system. I validate several aspect of o...

  20. Intelligent Car System

    Directory of Open Access Journals (Sweden)

    Qasim Siddique

    2009-01-01

    Full Text Available In modern life the road safety has becomes the core issue. One single move of a driver can cause horrifying accident. The main goal of intelligent car system is to make communication with other cars on the road. The system is able to control to speed, direction and the distance between the cars the intelligent car system is able to recognize traffic light and is able to take decision according to it. This paper presents a framework of the intelligent car system. I validate several aspect of our system using simulation.

  1. 77 FR 31831 - Designation for the Topeka, KS; Cedar Rapids, IA; Minot, ND; and Cincinnati, OH Areas

    Science.gov (United States)

    2012-05-30

    ... Grain Inspection, Packers and Stockyards Administration Designation for the Topeka, KS; Cedar Rapids, IA; Minot, ND; and Cincinnati, OH Areas AGENCY: Grain Inspection, Packers and Stockyards Administration....S.C. 71-87k. Alan R. Christian, Acting Administrator, Grain Inspection, Packers and Stockyards...

  2. Experimental Stress Analysis at Railway Inspection Pit

    Directory of Open Access Journals (Sweden)

    Nicuşor Laurentiu Zaharia

    2008-10-01

    Full Text Available Railway inspection pits are used in railway halls. The purpose of inspection pits is to allow the working under the vehicle. Inspection pits can be found in locomotive depots, factories etc. The new design for a inspection pit in a railway hall involve tests in purpose of homologations the railway infrastructure. Before the homologation committee meeting, tests are made; after the test, a testing report is made which it will be part at homologation documents.

  3. Multiple Intelligences and quotient spaces

    OpenAIRE

    Malatesta, Mike; Quintana, Yamilet

    2006-01-01

    The Multiple Intelligence Theory (MI) is one of the models that study and describe the cognitive abilities of an individual. In [7] is presented a referential system which allows to identify the Multiple Intelligences of the students of a course and to classify the level of development of such Intelligences. Following this tendency, the purpose of this paper is to describe the model of Multiple Intelligences as a quotient space, and also to study the Multiple Intelligences of an individual in...

  4. An intelligence collection management model.

    OpenAIRE

    Gandy, Thomas A.

    1984-01-01

    Approved for public release; distribution is unlimited This thesis examines the structure and functions of a generalized tactical intelligence collection system. Included are its position in the intelligence system structure, relationship with other activities in the intelligence system, and the organization and control of its components. A mathematical optimization model of a simplified intelligence collection system is developed to explore several issues related to intelligence collect...

  5. Emotional intelligence in gifted children

    OpenAIRE

    Simončič, Ana

    2013-01-01

    The purpose of this thesis is to present the link between the two constructs, namely emotional intelligence and gifted students. At the beginning the basic concepts, namely what are emotions and what is intelligence are explained. Both are combined in the phrase emotional intelligence. Each of the authors, who is dealing with emotional intelligence, sees focus somewhere else. Also the tools that can measure emotional intelligence in individuals are presented. Further work focuses on gifted st...

  6. Business Intelligence using Software Agents

    OpenAIRE

    Ana-Ramona BOLOGA; Razvan BOLOGA

    2011-01-01

    This paper presents some ideas about business intelligence today and the importance of developing real time business solutions. The authors make an exploration of links between business intelligence and artificial intelligence and focuses specifically on the implementation of software agents-based systems in business intelligence. There are briefly presented some of the few solutions proposed so far that use software agents properties for the benefit of business intelligence. The authors then...

  7. 38 CFR 61.65 - Inspections.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Inspections. 61.65 Section 61.65 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS (CONTINUED) VA HOMELESS PROVIDERS GRANT AND PER DIEM PROGRAM § 61.65 Inspections. VA may inspect the facility and any...

  8. 46 CFR 107.270 - Periodic inspection.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Periodic inspection. 107.270 Section 107.270 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND... approves. No written application is required. (c) The scope of the periodic inspection is the same as that...

  9. 46 CFR 107.269 - Annual inspection.

    Science.gov (United States)

    2010-10-01

    ... COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) A-MOBILE OFFSHORE DRILLING UNITS INSPECTION AND CERTIFICATION Inspection and Certification § 107.269 Annual inspection. (a) Your mobile offshore drilling unit... time and place which he or she approves. No written application is required. (c) The scope of the...

  10. Probabilistic inspection strategies for minimizing service failures

    Science.gov (United States)

    Brot, Abraham

    1994-01-01

    The INSIM computer program is described which simulates the 'limited fatigue life' environment in which aircraft structures generally operate. The use of INSIM to develop inspection strategies which aim to minimize service failures is demonstrated. Damage-tolerance methodology, inspection thresholds and customized inspections are simulated using the probability of failure as the driving parameter.

  11. Generator acceptance test and inspection report

    Energy Technology Data Exchange (ETDEWEB)

    Johns, B.R.

    1997-07-24

    This Acceptance Test Report(ATR) is the completed testing and inspection of the new portable generator. The testing and inspection is to verify that the generator provided by the vendor meets the requirements of specification WHC-S-0252, Revision 2. Attached is various other documentation to support the inspection and testing.

  12. Risk Based Inspection Planning of Ageing Structures

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Ersdal, Gerhard

    2008-01-01

    There are an increasing number of older installations in use on the Norwegian Continental shelf. Inspections are a key issue in ensuring the safety of an older installation, and the inspection intervals, inspection methods and its reliability are clearly influencing the safety of the installation...

  13. 7 CFR 75.38 - Lot inspections.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Lot inspections. 75.38 Section 75.38 Agriculture... § 75.38 Lot inspections. Each lot inspection shall be made on the basis of a representative sample obtained from that lot of seed by a licensed inspector or an authorized employee of the Department. Each...

  14. Real-Time Business Intelligence in the MIRABEL Smart Grid System

    DEFF Research Database (Denmark)

    Fischer, Ulrike; Kaulakiene, Dalia; Khalefa, Mohamed

    2012-01-01

    of energy related data, and must be able to react rapidly (but intelligently) when conditions change, leading to substantial real-time business intelligence challenges. This paper discusses these challenges and presents data management solutions in the European smart grid project MIRABEL. These solutions......) data. Experimental studies show that the proposed solutions support important real-time business intelligence tasks in a smart grid system....

  15. 50 CFR 260.28 - Issuance of an inspection report in lieu of an inspection certificate.

    Science.gov (United States)

    2010-10-01

    ... of an inspection certificate. 260.28 Section 260.28 Wildlife and Fisheries NATIONAL MARINE FISHERIES SERVICE, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE PROCESSED FISHERY... Inspection Service § 260.28 Issuance of an inspection report in lieu of an inspection certificate. A letter...

  16. 9 CFR 381.68 - Maximum inspection rates-New turkey inspection system.

    Science.gov (United States)

    2010-01-01

    ... for Bar-type cut turkey lines using a shackle with a 4-inch by 4-inch selector (or kickout), a 45... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Maximum inspection rates-New turkey... Procedures § 381.68 Maximum inspection rates—New turkey inspection system. (a) The maximum inspection rates...

  17. Interpersonal intelligence: key concepts

    Directory of Open Access Journals (Sweden)

    Meritxell Cano

    2011-10-01

    Full Text Available The purpose of this paper is to delimit the conceptual space of interpersonal intelligence, relating it to situations in which it is used. To this end, we first identify some aspects of an intellectual nature and the type of objects represented. The next section is devoted to the origins of interpersonal intelligence and its role in human adaptation. A third section focuses on the type of procedures for its measurement, not as a collection of tools commonly used, but as a way to make explicit the kind of evidence that is appropriate as good indicators of this intelligence. Finally, we describe some of the main confusions associated with the idea of this form of intelligence, integrating all aspects previously discussed.

  18. Engineering general intelligence

    CERN Document Server

    Goertzel, Ben; Geisweiller, Nil

    2014-01-01

    The work outlines a detailed blueprint for the creation of an Artificial General Intelligence system with capability at the human level and ultimately beyond, according to the Cog Prime AGI design and the Open Cog software architecture.

  19. Intelligence Issues for Congress

    National Research Council Canada - National Science Library

    Best, Jr, Richard A

    2005-01-01

    To address the challenges facing the U.S Intelligence Community in the 21st Century, congressional and executive branch initiatives have sought to improve coordination among the different agencies and to encourage better analysis...

  20. Intelligence Issues for Congress

    National Research Council Canada - National Science Library

    Best, Jr, Richard A

    2007-01-01

    To address the challenges facing the U.S. Intelligence Community in the 21st century, congressional and executive branch initiatives have sought to improve coordination among the different agencies and to encourage better analysis...

  1. Intelligence Issues for Congress

    National Research Council Canada - National Science Library

    Best, Jr, Richard A

    2006-01-01

    To address the challenges facing the U.S. Intelligence Community in the 21st Century, congressional and executive branch initiatives have sought to improve coordination among the different agencies and to encourage better analysis...

  2. Intelligence Issues for Congress

    National Research Council Canada - National Science Library

    Best. Jr, Richard A

    2006-01-01

    To address the challenges facing the U.S. Intelligence Community in the 21st century, congressional and executive branch initiatives have sought to improve coordination among the different agencies and to encourage better analysis...

  3. Handbook of Intelligent Vehicles

    CERN Document Server

    2012-01-01

    The Handbook of Intelligent Vehicles provides a complete coverage of the fundamentals, new technologies, and sub-areas essential to the development of intelligent vehicles; it also includes advances made to date, challenges, and future trends. Significant strides in the field have been made to date; however, so far there has been no single book or volume which captures these advances in a comprehensive format, addressing all essential components and subspecialties of intelligent vehicles, as this book does. Since the intended users are engineering practitioners, as well as researchers and graduate students, the book chapters do not only cover fundamentals, methods, and algorithms but also include how software/hardware are implemented, and demonstrate the advances along with their present challenges. Research at both component and systems levels are required to advance the functionality of intelligent vehicles. This volume covers both of these aspects in addition to the fundamentals listed above.

  4. Engineering general intelligence

    CERN Document Server

    Goertzel, Ben; Geisweiller, Nil

    2014-01-01

    The work outlines a novel conceptual and theoretical framework for understanding Artificial General Intelligence and based on this framework outlines a practical roadmap for the development of AGI with capability at the human level and ultimately beyond.

  5. A smart ROV solution for ship hull and harbor inspection

    Science.gov (United States)

    Reed, Scott; Wood, Jon; Vazquez, Jose; Mignotte, Pierre-Yves; Privat, Benjamin

    2010-04-01

    Hull and harbor infrastructure inspections are frequently performed manually and involve quite a bit of risk and human and monetary resources. In any kind of threat and resource constrained environment, this involves unacceptable levels of risk and cost. Modern Remotely Operated Vehicles are highly refined machines that provide features and capabilities previously unavailable. Operations once carried out by divers can now be carried out more quickly, efficiently and safely by smart enabled ROVs. ROVs are rapidly deployable and capable of continuous, reliable operations in adverse conditions. They also provide a stable platform on which multiple sensors may be mounted and utilized to meet the harbor inspection problem. Automated Control software provides ROV's and their pilots with the capability to inspect complex, constrained environments such as those found in a harbor region. This application and the user interface allow the ROV to automatically conduct complex maneuvers relative to the area being inspected and relieves the training requirements and work load for the pilot, allowing he or she to focus on the primary task of survey, inspection and looking for possible threats (such as IEDs, Limpet Mines, signs of sabotage, etc). Real-time sensor processing tools can be integrated into the smart ROV solution to assist the operator. Automatic Target Recognition (ATR) algorithms are used to search through the sensor data collected by the ROV in real time. These algorithms provide immediate feedback on possible threats and notify the operator of regions that may require manual verification. Sensor data (sonar or video) is also mosaiced, providing the operator with real-time situational awareness and a coverage map of the hull or seafloor. Detected objects may also be placed in the context of the large scale characteristics of the hull (or bottom or pilings) and localized. Within the complex areas such as the harbor pier pilings and the running gear of the ship, real

  6. Intelligent power substation package system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Modern industrial development had started with electric energy and to have a large capacity and multi-function of electric facility has been a trend with a rapid increase of electricity demand. Furthermore, electric power consumers want to have a high quality electric service and for the aspect of electricity facility maintenance, it pursuits convenience, stability, and making it compact. In addition, the application of electric power remote management system and saving electric energy loss for reasonable use of energy has been expanded. If electric power demand is managed by introducing intelligent transformer and power controller, remote control of personal use transformer facility and power monitoring system(a remote recovery system), it is possible to create value added by achieving the following: save electricity cost, prevent increasing contract power, improve business competitive power, check electricity status through web, and etc. 1 fig., 8 tabs.

  7. Factors Driving Business Intelligence Culture

    Directory of Open Access Journals (Sweden)

    Rimvydas Skyrius

    2016-05-01

    Full Text Available The field of business intelligence (BI, despite rapid technology advances, continues to feature inadequate levels of adoption. The attention of researchers is shifting towards hu-man factors of BI adoption. The wide set of human factors influencing BI adoption con-tains elements of what we call BI culture – an overarching concept covering key managerial issues that come up in BI implementation. Research sources provide different sets of features pertaining to BI culture or related concepts – decision-making culture, analytical culture and others. The goal of this paper is to perform the review of research and practical sources to examine driving forces of BI – data-driven approaches, BI agility, maturity and acceptance – to point out culture-related issues that support BI adoption and to suggest an emerging set of factors influencing BI culture.

  8. Intelligent distributed production control

    OpenAIRE

    Thomas, André; Trentesaux, Damien; Valckenaers, Paul

    2012-01-01

    International audience; This editorial introduces the special issue of the Springer journal, Journal of Intelligent Manufacturing, on intelligent distributed production control. This special issue contains selected papers presented at the 13th IFAC Symposium on Information Control Problems in Manufacturing - INCOM'2009 (Bakhtadze and Dolgui, 2009). The papers in this special issue were selected because of their high quality and their specific way of addressing the variety of issues dealing wi...

  9. Applications Of Artificial Intelligence

    Science.gov (United States)

    Trivedi, Mohan M.; Gilmore, John F.

    1986-03-01

    Intelligence evolves out of matter, so said the Sankhya philosophers of ancient India. The discipline of artificial intelligence (Al), which was established some 30 years ago, has confirmed the validity of the above assertion. Recently, a number of AI applications have been successfully demonstrated, generating a great deal of excitement and interest in scientific and technical circles. In this special issue of Optical Engineering a representative set of applications that incorporate Al principles is presented.

  10. Artificial Intelligence Study (AIS).

    Science.gov (United States)

    1987-02-01

    ARTIFICIAL INTELLIGNECE HARDWARE ....... 2-50 AI Architecture ................................... 2-49 AI Hardware ....................................... 2...ftf1 829 ARTIFICIAL INTELLIGENCE STUDY (RIS)(U) MAY CONCEPTS 1/3 A~NLYSIS AGENCY BETHESA RD R B NOJESKI FED 6? CM-RP-97-1 NCASIFIED /01/6 M |K 1.0...p/ - - ., e -- CAA- RP- 87-1 SAOFŔ)11 I ARTIFICIAL INTELLIGENCE STUDY (AIS) tNo DTICFEBRUARY 1987 LECT 00 I PREPARED BY RESEARCH AND ANALYSIS

  11. Intelligent distributed computing

    CERN Document Server

    Thampi, Sabu

    2015-01-01

    This book contains a selection of refereed and revised papers of the Intelligent Distributed Computing Track originally presented at the third International Symposium on Intelligent Informatics (ISI-2014), September 24-27, 2014, Delhi, India.  The papers selected for this Track cover several Distributed Computing and related topics including Peer-to-Peer Networks, Cloud Computing, Mobile Clouds, Wireless Sensor Networks, and their applications.

  12. Intelligent Elements for ISHM

    Science.gov (United States)

    Schmalzel, John L.; Morris, Jon; Turowski, Mark; Figueroa, Fernando; Oostdyk, Rebecca

    2008-01-01

    There are a number of architecture models for implementing Integrated Systems Health Management (ISHM) capabilities. For example, approaches based on the OSA-CBM and OSA-EAI models, or specific architectures developed in response to local needs. NASA s John C. Stennis Space Center (SSC) has developed one such version of an extensible architecture in support of rocket engine testing that integrates a palette of functions in order to achieve an ISHM capability. Among the functional capabilities that are supported by the framework are: prognostic models, anomaly detection, a data base of supporting health information, root cause analysis, intelligent elements, and integrated awareness. This paper focuses on the role that intelligent elements can play in ISHM architectures. We define an intelligent element as a smart element with sufficient computing capacity to support anomaly detection or other algorithms in support of ISHM functions. A smart element has the capabilities of supporting networked implementations of IEEE 1451.x smart sensor and actuator protocols. The ISHM group at SSC has been actively developing intelligent elements in conjunction with several partners at other Centers, universities, and companies as part of our ISHM approach for better supporting rocket engine testing. We have developed several implementations. Among the key features for these intelligent sensors is support for IEEE 1451.1 and incorporation of a suite of algorithms for determination of sensor health. Regardless of the potential advantages that can be achieved using intelligent sensors, existing large-scale systems are still based on conventional sensors and data acquisition systems. In order to bring the benefits of intelligent sensors to these environments, we have also developed virtual implementations of intelligent sensors.

  13. 77 FR 76452 - Grain Inspection Advisory Committee Reestablishment

    Science.gov (United States)

    2012-12-28

    ... Doc No: 2012-31281] DEPARTMENT OF AGRICULTURE Grain Inspection, Packers and Stockyards Administration Grain Inspection Advisory Committee Reestablishment AGENCY: Grain Inspection, Packers and Stockyards... of Agriculture has reestablished the Grain Inspection, Packers and Stockyards Administration (GIPSA...

  14. Shape completion for automatic inspection

    Science.gov (United States)

    Preston, Adrian; Forte, Peter

    1996-08-01

    In this paper we outline an approach to a fast low-cost system for the inspection and evaluation of surface-mount assemblies and solder joints, giving particular focus to the need for robustness in such a system. We describe the software modules involved in extracting features, and shape analysis for the purpose of inspection. A common problem during the early stages of image processing is the loss of information about the edges of shape because of noise, weak contrast, or occlusion, which often increases the amount of incorrect interpretations of a given image when presented to higher levels of processing. An algorithm is described which significantly reduces the effect of such problems before information is passed to later stages of the vision process. The algorithm, which uses information about contour to correct dropouts is generic, employing no application specific information and is therefore applicable to vision systems in general.

  15. Evolutionary Inspection and Corruption Games

    Directory of Open Access Journals (Sweden)

    Stamatios Katsikas

    2016-10-01

    Full Text Available We extend a standard two-person, non-cooperative, non-zero sum, imperfect inspection game, considering a large population of interacting inspectees and a single inspector. Each inspectee adopts one strategy, within a finite/infinite bounded set of strategies returning increasingly illegal profits, including compliance. The inspectees may periodically update their strategies after randomly inter-comparing the obtained payoffs, setting their collective behaviour subject to evolutionary pressure. The inspector decides, at each update period, the optimum fraction of his/her renewable budget to invest on his/her interference with the inspectees’ collective effect. To deter the inspectees from violating, he/she assigns a fine to each illegal strategy. We formulate the game mathematically, study its dynamics and predict its evolution subject to two key controls, the inspection budget and the punishment fine. Introducing a simple linguistic twist, we also capture the corresponding version of a corruption game.

  16. GABA predicts visual intelligence.

    Science.gov (United States)

    Cook, Emily; Hammett, Stephen T; Larsson, Jonas

    2016-10-06

    Early psychological researchers proposed a link between intelligence and low-level perceptual performance. It was recently suggested that this link is driven by individual variations in the ability to suppress irrelevant information, evidenced by the observation of strong correlations between perceptual surround suppression and cognitive performance. However, the neural mechanisms underlying such a link remain unclear. A candidate mechanism is neural inhibition by gamma-aminobutyric acid (GABA), but direct experimental support for GABA-mediated inhibition underlying suppression is inconsistent. Here we report evidence consistent with a global suppressive mechanism involving GABA underlying the link between sensory performance and intelligence. We measured visual cortical GABA concentration, visuo-spatial intelligence and visual surround suppression in a group of healthy adults. Levels of GABA were strongly predictive of both intelligence and surround suppression, with higher levels of intelligence associated with higher levels of GABA and stronger surround suppression. These results indicate that GABA-mediated neural inhibition may be a key factor determining cognitive performance and suggests a physiological mechanism linking surround suppression and intelligence. Copyright © 2016 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

  17. Professionalizing Intelligence Analysis

    Directory of Open Access Journals (Sweden)

    James B. Bruce

    2015-09-01

    Full Text Available This article examines the current state of professionalism in national security intelligence analysis in the U.S. Government. Since the introduction of major intelligence reforms directed by the Intelligence Reform and Terrorism Prevention Act (IRTPA in December, 2004, we have seen notable strides in many aspects of intelligence professionalization, including in analysis. But progress is halting, uneven, and by no means permanent. To consolidate its gains, and if it is to continue improving, the U.S. intelligence community (IC should commit itself to accomplishing a new program of further professionalization of analysis to ensure that it will develop an analytic cadre that is fully prepared to deal with the complexities of an emerging multipolar and highly dynamic world that the IC itself is forecasting. Some recent reforms in intelligence analysis can be assessed against established standards of more fully developed professions; these may well fall short of moving the IC closer to the more fully professionalized analytical capability required for producing the kind of analysis needed now by the United States.

  18. 78 FR 90 - Defense Intelligence Agency National Intelligence University Board of Visitors Closed Meeting

    Science.gov (United States)

    2013-01-02

    ... of the Secretary Defense Intelligence Agency National Intelligence University Board of Visitors Closed Meeting AGENCY: National Intelligence University, Defense Intelligence Agency, Department of... a closed meeting of the National Intelligence University Board of Visitors has been scheduled as...

  19. 78 FR 32241 - Defense Intelligence Agency National Intelligence University Board of Visitors; Notice of Closed...

    Science.gov (United States)

    2013-05-29

    ... of the Secretary Defense Intelligence Agency National Intelligence University Board of Visitors; Notice of Closed Meeting AGENCY: National Intelligence University, Defense Intelligence Agency... given that a closed meeting of the National Intelligence University Board of Visitors has been scheduled...

  20. Improving Intelligence Integration Amongst the Intelligence Community

    Science.gov (United States)

    2014-06-13

    attacks in 2001 and in previous years. In 1949, 55 years prior to the IRTPA of 2004, the first Hoover Commission demanded that the CIA be the one central...In 1955 the second Hoover Commission made a recommendation, similar to the duties of the current DNI that would place the DCI in...3857-5, “The Next Steps in Reshaping Intelligence.” Research Report, The RAND Corporation, December 2005. http://www.rand.org/ content/ dam /rand/pubs

  1. Learning Effects of Interactive Whiteboard Pedagogy for Students in Taiwan from the Perspective of Multiple Intelligences

    Science.gov (United States)

    Chen, Hong-Ren; Chiang, Chih-Hao; Lin, Wen-Shan

    2013-01-01

    With the rapid progress in information technology, interactive whiteboards have become IT-integrated in teaching activities. The theory of multiple intelligences argues that every person possesses multiple intelligences, emphasizing learners' cognitive richness and the possible role of these differences in enhanced learning. This study is the…

  2. Airline Applications of Business Intelligence Systems

    Directory of Open Access Journals (Sweden)

    Mihai ANDRONIE

    2015-09-01

    Full Text Available Airline industry is characterized by large quantities of complex, unstructured and rapid changing data that can be categorized as big data, requiring specialized analysis tools to explore it with the purpose of obtaining useful knowledge as decision support for companies that need to fundament their activities and improve the processes they are carrying on. In this context, business intelligence tools are valuable instruments that can optimally process airline related data so that the activities that are conducted can be optimized to maximize profits, while meeting customer requirements. An airline company that has access to large volumes of data (stored into conventional or big data repositories has two options to extract useful decision support information: processing data by using general-purpose business intelligence systems or processing data by using industry specific business intelligence systems. Each of these two options has both advantages and disadvantages for the airline companies that intend to use them. The present paper presents a comparative study of a number of general-purpose and airline industry specific business intelligence systems, together with their main advantages and disadvantages.

  3. Fluid intelligence: A brief history.

    Science.gov (United States)

    Kent, Phillip

    2017-01-01

    The concept of fluid and crystallized intelligence was introduced to the psychological community approximately 75 years ago by Raymond B. Cattell, and it continues to be an area of active research and controversy. The purpose of this paper is to provide a brief overview of the origin of the concept, early efforts to define intelligence and uses of intelligence tests to address pressing social issues, and the ongoing controversies associated with fluid intelligence and the structure of intelligence. The putative neuropsychological underpinnings and neurological substrates of fluid intelligence are discussed.

  4. Business Intelligence using Software Agents

    Directory of Open Access Journals (Sweden)

    Ana-Ramona BOLOGA

    2011-12-01

    Full Text Available This paper presents some ideas about business intelligence today and the importance of developing real time business solutions. The authors make an exploration of links between business intelligence and artificial intelligence and focuses specifically on the implementation of software agents-based systems in business intelligence. There are briefly presented some of the few solutions proposed so far that use software agents properties for the benefit of business intelligence. The authors then propose some basic ideas for developing real-time agent-based software system for business intelligence in supply chain management, using Case Base Reasoning Agents.

  5. The role of decision speed in the construct of intelligence

    Directory of Open Access Journals (Sweden)

    Valentin Bucik

    2002-12-01

    Full Text Available A theory of general intelligence in Spearman's sense has been frequently verified via two complementary approaches, the one using psychometric and the other using experimental methodology. The results led to the conclusion that both, psychometric tests and elementary cognitive tasks in different experimental paradigms measure the same thing in substantial extent. The rapid, error free information processing, reflecting the efficiency of a nervous system with limited capacity, was supposed to be the essential component of the intellect. This view is often criticised by the authors who claim that high correlation between speed of information processing and psychometric intelligence is simply the consequence of the fact that some intelligence tests themselves are "speeded" and that mental speed is merely a marginal variable in both psychometric tests and elementary cognitive tasks. In our study we tested 88 subjects with three psychometric tests, measuring general intelligence in Spearman's sense. Parallel versions of those tests were created by splitting each of them into two equivalent halves by "odd-even" principle. One version was applied under strict time constraints and the other one without time pressure. In addition five speed-of-information-processing paradigms were applied. The relationship between the mental speed and general intelligence measured in timed and untimed conditions was examined. Results suggest that the role of speed of information processing is significant in determining general intelligence. Mental speed also seems to be relatively independent with regarding to time limitations in testing intelligence. The results are discussed in terms of the neural efficiency presumptions.

  6. Developing the information management system for safeguards national inspection

    Energy Technology Data Exchange (ETDEWEB)

    Park, S. J.; Jeon, I.; Park, W. S.; Min, K. S. [KAERI, Taejon (Korea, Republic of)

    2003-10-01

    The inspection information management system for safeguards national inspection is aimed to do the national safeguards inspection with efficiency, and to decrease the inspector's load to write inspection report by systematizing the inspection jobs and sharing the inspection data. National safeguards inspection is consisted two large jobs. The first is the national safeguards supporting job of managing to support the national inspection mission. The other is the writing a national inspection report after completing the national inspection. Before the developing of inspection information management system, the official tools(spread sheet, word processor) are usually used. But there is problem to share the data, to produce the statistics data. To solve the these problem, we developed the inspection information management system that process the job from initial to final inspection work, and opened user education. This paper explain the procedure of developing the inspection information management system for safeguards national inspection.

  7. Extreme Learning Machine and Moving Least Square Regression Based Solar Panel Vision Inspection

    Directory of Open Access Journals (Sweden)

    Heng Liu

    2017-01-01

    Full Text Available In recent years, learning based machine intelligence has aroused a lot of attention across science and engineering. Particularly in the field of automatic industry inspection, the machine learning based vision inspection plays a more and more important role in defect identification and feature extraction. Through learning from image samples, many features of industry objects, such as shapes, positions, and orientations angles, can be obtained and then can be well utilized to determine whether there is defect or not. However, the robustness and the quickness are not easily achieved in such inspection way. In this work, for solar panel vision inspection, we present an extreme learning machine (ELM and moving least square regression based approach to identify solder joint defect and detect the panel position. Firstly, histogram peaks distribution (HPD and fractional calculus are applied for image preprocessing. Then an ELM-based defective solder joints identification is discussed in detail. Finally, moving least square regression (MLSR algorithm is introduced for solar panel position determination. Experimental results and comparisons show that the proposed ELM and MLSR based inspection method is efficient not only in detection accuracy but also in processing speed.

  8. Trends in ambient intelligent systems the role of computational intelligence

    CERN Document Server

    Khan, Mohammad; Abraham, Ajith

    2016-01-01

    This book demonstrates the success of Ambient Intelligence in providing possible solutions for the daily needs of humans. The book addresses implications of ambient intelligence in areas of domestic living, elderly care, robotics, communication, philosophy and others. The objective of this edited volume is to show that Ambient Intelligence is a boon to humanity with conceptual, philosophical, methodical and applicative understanding. The book also aims to schematically demonstrate developments in the direction of augmented sensors, embedded systems and behavioral intelligence towards Ambient Intelligent Networks or Smart Living Technology. It contains chapters in the field of Ambient Intelligent Networks, which received highly positive feedback during the review process. The book contains research work, with in-depth state of the art from augmented sensors, embedded technology and artificial intelligence along with cutting-edge research and development of technologies and applications of Ambient Intelligent N...

  9. Systems and components for intelligent buildings; Sistemi e componenti per la domotica

    Energy Technology Data Exchange (ETDEWEB)

    Benzi, F. [Pavia Univ., Pavia (Italy). Dipt. di Elettronica

    2001-06-01

    The rapid development of automation and communication techniques involve also the intelligent buildings project. [Italian] Il rapido sviluppo delle tecniche di automazione e telecomunicazione investe anche la progettazione degli edifici intelligenti.

  10. Revamping the Operations Center Concept in the Intelligence Community for the Twenty-First Century

    National Research Council Canada - National Science Library

    Vandaveer, Joan

    2002-01-01

    ...) to deal more effectively with rapidly changing crisis situations to ensure that our policymakers and military commanders receive the 'alert and warning' and timely current intelligence they will need...

  11. Creative Intelligence: Intro to Design Thinking Workshop / e-week short course flyer

    OpenAIRE

    Gibbon, Anne

    2014-01-01

    • Learn how design thinking can develop your capacity for creative intelligence. • Use the design thinking process to challenge your biases and ask better questions. • Explore the potential for rapid prototyping to support decision making.

  12. Artificial Intelligence and Machine Learning in Radiology: Opportunities, Challenges, Pitfalls, and Criteria for Success.

    Science.gov (United States)

    Thrall, James H; Li, Xiang; Li, Quanzheng; Cruz, Cinthia; DO, Synho; Dreyer, Keith; Brink, James

    2018-01-31

    Worldwide interest in artificial intelligence (AI) applications, including imaging, is high and growing rapidly, fueled by availability of large datasets ("big data"), substantial advances in computing power, and new deep-learning algorithms. Apart from developing new AI methods per se, there are many opportunities and challenges for the imaging community, including the development of a common nomenclature, better ways to share image data, and standards for validating AI program use across different imaging platforms and patient populations. AI surveillance programs may help radiologists prioritize work lists by identifying suspicious or positive cases for early review. AI programs can be used to extract "radiomic" information from images not discernible by visual inspection, potentially increasing the diagnostic and prognostic value derived from image datasets. Predictions have been made that suggest AI will put radiologists out of business. This issue has been overstated, and it is much more likely that radiologists will beneficially incorporate AI methods into their practices. Current limitations in availability of technical expertise and even computing power will be resolved over time and can also be addressed by remote access solutions. Success for AI in imaging will be measured by value created: increased diagnostic certainty, faster turnaround, better outcomes for patients, and better quality of work life for radiologists. AI offers a new and promising set of methods for analyzing image data. Radiologists will explore these new pathways and are likely to play a leading role in medical applications of AI. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  13. Automated Intelligent Monitoring and the Controlling Software System for Solar Panels

    Science.gov (United States)

    Nalamwar, H. S.; Ivanov, M. A.; Baidali, S. A.

    2017-01-01

    The inspection of the solar panels on a periodic basis is important to improve longevity and ensure performance of the solar system. To get the most solar potential of the photovoltaic (PV) system is possible through an intelligent monitoring & controlling system. The monitoring & controlling system has rapidly increased its popularity because of its user-friendly graphical interface for data acquisition, monitoring, controlling and measurements. In order to monitor the performance of the system especially for renewable energy source application such as solar photovoltaic (PV), data-acquisition systems had been used to collect all the data regarding the installed system. In this paper the development of a smart automated monitoring & controlling system for the solar panel is described, the core idea is based on IoT (the Internet of Things). The measurements of data are made using sensors, block management data acquisition modules, and a software system. Then, all the real-time data collection of the electrical output parameters of the PV plant such as voltage, current and generated electricity is displayed and stored in the block management. The proposed system is smart enough to make suggestions if the panel is not working properly, to display errors, to remind about maintenance of the system through email or SMS, and to rotate panels according to a sun position using the Ephemeral table that stored in the system. The advantages of the system are the performance of the solar panel system which can be monitored and analyzed.

  14. Synthetic collective intelligence.

    Science.gov (United States)

    Solé, Ricard; Amor, Daniel R; Duran-Nebreda, Salva; Conde-Pueyo, Núria; Carbonell-Ballestero, Max; Montañez, Raúl

    2016-10-01

    Intelligent systems have emerged in our biosphere in different contexts and achieving different levels of complexity. The requirement of communication in a social context has been in all cases a determinant. The human brain, probably co-evolving with language, is an exceedingly successful example. Similarly, social insects complex collective decisions emerge from information exchanges between many agents. The difference is that such processing is obtained out of a limited individual cognitive power. Computational models and embodied versions using non-living systems, particularly involving robot swarms, have been used to explore the potentiality of collective intelligence. Here we suggest a novel approach to the problem grounded in the genetic engineering of unicellular systems, which can be modified in order to interact, store memories or adapt to external stimuli in collective ways. What we label as Synthetic Swarm Intelligence defines a parallel approach to the evolution of computation and swarm intelligence and allows to explore potential embodied scenarios for decision making at the microscale. Here, we consider several relevant examples of collective intelligence and their synthetic organism counterparts. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  15. Intelligent Life in Cosmology

    CERN Document Server

    Tipler, Frank J

    2003-01-01

    I shall present three arguments for the proposition that intelligent life is very rare in the universe. First, I shall summarize the consensus opinion of the founders of the Modern Synthesis (Simpson, Dobzhanski, and Mayr) that the evolution of intelligent life is exceedingly improbable. Second, I shall develop the Fermi Paradox: if they existed they'd be here. Third, I shall show that if intelligent life were too common, it would use up all available resources and die out. But I shall show that the quantum mechanical principle of unitarity (actually a form of teleology!) requires intelligent life to survive to the end of time. Finally, I shall argue that, if the universe is indeed accelerating, then survival to the end of time requires that intelligent life, though rare, to have evolved several times in the visible universe. I shall argue that the acceleration is a consequence of the excess of matter over antimatter in the universe. I shall suggest experiments to test these claims.

  16. Intelligent Potroom Operation

    Energy Technology Data Exchange (ETDEWEB)

    Jan Berkow; Larry Banta

    2003-07-29

    The Intelligent Potroom Operation project focuses on maximizing the performance of an aluminum smelter by innovating components for an intelligent manufacturing system. The Intelligent Potroom Advisor (IPA) monitors process data to identify reduction cells exhibiting behaviors that require immediate attention. It then advises operational personnel on those heuristic-based actions to bring the cell back to an optimal operating state in order to reduce the duration and frequency of substandard reduction cell performance referred to as ''Off-Peak Modes'' (OPMs). Techniques developed to identify cells exhibiting OPMs include the use of a finite element model-based cell state estimator for defining the cell's current operating state via advanced cell noise analyses. In addition, rule induction was also employed to identify statistically significant complex behaviors that occur prior to OPMs. The intelligent manufacturing system design, concepts and formalisms developed in this project w ere used as a basis for an intelligent manufacturing system design. Future research will incorporate an adaptive component to automate continuous process improvement, a technology platform with the potential to improve process performance in many of the other Industries of the Future applications as well.

  17. Architectures for intelligent machines

    Science.gov (United States)

    Saridis, George N.

    1991-01-01

    The theory of intelligent machines has been recently reformulated to incorporate new architectures that are using neural and Petri nets. The analytic functions of an intelligent machine are implemented by intelligent controls, using entropy as a measure. The resulting hierarchical control structure is based on the principle of increasing precision with decreasing intelligence. Each of the three levels of the intelligent control is using different architectures, in order to satisfy the requirements of the principle: the organization level is moduled after a Boltzmann machine for abstract reasoning, task planning and decision making; the coordination level is composed of a number of Petri net transducers supervised, for command exchange, by a dispatcher, which also serves as an interface to the organization level; the execution level, include the sensory, planning for navigation and control hardware which interacts one-to-one with the appropriate coordinators, while a VME bus provides a channel for database exchange among the several devices. This system is currently implemented on a robotic transporter, designed for space construction at the CIRSSE laboratories at the Rensselaer Polytechnic Institute. The progress of its development is reported.

  18. Social Representations of Intelligence

    Directory of Open Access Journals (Sweden)

    Elena Zubieta

    2016-02-01

    Full Text Available The article stresses the relationship between Explicit and Implicit theories of Intelligence. Following the line of common sense epistemology and the theory of Social Representations, a study was carried out in order to analyze naive’s explanations about Intelligence Definitions. Based on Mugny & Carugati (1989 research, a self-administered questionnaire was designed and filled in by 286 subjects. Results are congruent with the main hyphotesis postulated: A general overlap between explicit and implicit theories showed up. According to the results Intelligence appears as both, a social attribute related to social adaptation and as a concept defined in relation with contextual variables similar to expert’s current discourses. Nevertheless, conceptions based on “gifted ideology” still are present stressing the main axes of Intelligence debate: biological and sociological determinism. In the same sense, unfamiliarity and social identity are reaffirmed as organizing principles of social representation. The distance with the object -measured as the belief in intelligence differences as a solve/non solve problem- and the level of implication with the topic -teachers/no teachers- appear as discriminating elements at the moment of supporting specific dimensions. 

  19. ANNUAL RADIOACTIVE WASTE TANK INSPECTION PROGRAM - 2011

    Energy Technology Data Exchange (ETDEWEB)

    West, B.; Waltz, R.

    2012-06-21

    Aqueous radioactive wastes from Savannah River Site (SRS) separations and vitrification processes are contained in large underground carbon steel tanks. Inspections made during 2011 to evaluate these vessels and other waste handling facilities along with evaluations based on data from previous inspections are the subject of this report. The 2011 inspection program revealed that the structural integrity and waste confinement capability of the Savannah River Site waste tanks were maintained. All inspections scheduled per SRR-LWE-2011-00026, HLW Tank Farm Inspection Plan for 2011, were completed. Ultrasonic measurements (UT) performed in 2011 met the requirements of C-ESR-G-00006, In-Service Inspection Program for High Level Waste Tanks, Rev. 3, and WSRC-TR-2002-00061, Rev.6. UT inspections were performed on Tanks 25, 26 and 34 and the findings are documented in SRNL-STI-2011-00495, Tank Inspection NDE Results for Fiscal Year 2011, Waste Tanks 25, 26, 34 and 41. A total of 5813 photographs were made and 835 visual and video inspections were performed during 2011. A potential leaksite was discovered at Tank 4 during routine annual inspections performed in 2011. The new crack, which is above the allowable fill level, resulted in no release to the environment or tank annulus. The location of the crack is documented in C-ESR-G-00003, SRS High Level Waste Tank Leaksite Information, Rev.6.

  20. Wafer plane inspection for advanced reticle defects

    Science.gov (United States)

    Nagpal, Rajesh; Ghadiali, Firoz; Kim, Jun; Huang, Tracy; Pang, Song

    2008-05-01

    Readiness of new mask defect inspection technology is one of the key enablers for insertion & transition of the next generation technology from development into production. High volume production in mask shops and wafer fabs demands a reticle inspection system with superior sensitivity complemented by a low false defect rate to ensure fast turnaround of reticle repair and defect disposition (W. Chou et al 2007). Wafer Plane Inspection (WPI) is a novel approach to mask defect inspection, complementing the high resolution inspection capabilities of the TeraScanHR defect inspection system. WPI is accomplished by using the high resolution mask images to construct a physical mask model (D. Pettibone et al 1999). This mask model is then used to create the mask image in the wafer aerial plane. A threshold model is applied to enhance the inspectability of printing defects. WPI can eliminate the mask restrictions imposed on OPC solutions by inspection tool limitations in the past. Historically, minimum image restrictions were required to avoid nuisance inspection stops and/or subsequent loss of sensitivity to defects. WPI has the potential to eliminate these limitations by moving the mask defect inspections to the wafer plane. This paper outlines Wafer Plane Inspection technology, and explores the application of this technology to advanced reticle inspection. A total of twelve representative critical layers were inspected using WPI die-to-die mode. The results from scanning these advanced reticles have shown that applying WPI with a pixel size of 90nm (WPI P90) captures all the defects of interest (DOI) with low false defect detection rates. In validating CD predictions, the delta CDs from WPI are compared against Aerial Imaging Measurement System (AIMS), where a good correlation is established between WPI and AIMSTM.

  1. Steam generator tube inspection in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Fukui, Shigetaka [Japan Power Engineering and Inspection Corp., Tokyo (Japan)

    1997-02-01

    Steam generator tube inspection was first carried out in 1971 at Mihama Unit-1 that is first PWR plant in Japan, when the plant was brought into the first annual inspection. At that time, inspection was made on sampling basis, and only bobbin coil probe was used. After experiencing various kinds of tube degradations, inspection method was changed from sampling to all number of tubes, and various kinds of probes were used to get higher detectability of flaw. At present, it is required that all the tubes shall be inspected in their full length at each annual inspection using standard bobbin coil probe, and some special probes for certain plants that have susceptibility of occurrence of flaw. Sleeve repaired portion is included in this inspection. As a result of analyses of eddy current testing data, all indications that have been evaluated to be 20% wall thickness or deeper shall be repaired by either plugging or sleeving, where flaw morphology is to be a wastage or wear. Other types of flaw such as IGA/SCC are not allowed to be left inservice when those indications are detected. These inspections are performed according to inspection procedures that are approved by regulatory authority. Actual inspections are witnessed by the Japan Power engineering and inspection corporation (JAPEIC)`s inspectors during data acquisition and analysis, and they issue inspection report to authority for review and approval. It is achieved high safety performance of steam generator through this method of inspections, however. some tube leakage problems were experienced in the past. To prevent recurrence of such events, government is conducting development and verification test program for new eddy current testing technology.

  2. Intelligence analysis – the royal discipline of Competitive Intelligence

    Directory of Open Access Journals (Sweden)

    František Bartes

    2011-01-01

    Full Text Available The aim of this article is to propose work methodology for Competitive Intelligence teams in one of the intelligence cycle’s specific area, in the so-called “Intelligence Analysis”. Intelligence Analysis is one of the stages of the Intelligence Cycle in which data from both the primary and secondary research are analyzed. The main result of the effort is the creation of added value for the information collected. Company Competiitve Intelligence, correctly understood and implemented in business practice, is the “forecasting of the future”. That is forecasting about the future, which forms the basis for strategic decisions made by the company’s top management. To implement that requirement in corporate practice, the author perceives Competitive Intelligence as a systemic application discipline. This approach allows him to propose a “Work Plan” for Competitive Intelligence as a fundamental standardized document to steer Competitive Intelligence team activities. The author divides the Competitive Intelligence team work plan into five basic parts. Those parts are derived from the five-stage model of the intelligence cycle, which, in the author’s opinion, is more appropriate for complicated cases of Competitive Intelligence.

  3. Modelling traffic flows with intelligent cars and intelligent roads

    NARCIS (Netherlands)

    van Arem, Bart; Tampere, Chris M.J.; Malone, Kerry

    2003-01-01

    This paper addresses the modeling of traffic flows with intelligent cars and intelligent roads. It will describe the modeling approach MIXIC and review the results for different ADA systems: Adaptive Cruise Control, a special lane for Intelligent Vehicles, cooperative following and external speed

  4. The Literature of Competitive Intelligence.

    Science.gov (United States)

    Walker, Thomas D.

    1994-01-01

    Describes competitive intelligence (CI) literature in terms of its location, quantity, authorship, length, and problems of bibliographic access. Highlights include subject access; competitive intelligence research; espionage and security; monographs; and journals. (21 references) (LRW)

  5. Instant Adobe Edge Inspect starter

    CERN Document Server

    Khan, Joseph

    2013-01-01

    Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. This easy-to-understand Starter guide will get you up to speed with Adobe Edge Inspect quickly and with little effort.This book is for frontend web developers and designers who are developing and testing web applications targeted for mobile browsers. It's assumed that you have a basic understanding of creating web applications using HTML, CSS, and JavaScript, as well as being familiar with running web pages from local HTTP servers. Readers are a

  6. ROV inspection inside ventilation ducts

    Energy Technology Data Exchange (ETDEWEB)

    Sharp, R.E.; Street, P.F.; Cole, G.V. [AEA Technology, Harwell (United Kingdom)

    1996-12-31

    An instrumentation package for carrying out visual inspections and radiation monitoring within radioactive duct-work has been developed. This paper describes the first application of the package in the main ventilation duct of the Dounreay fuel cycle area. The package was deployed via a commerical ROV within a duct consisting of two parallel runs, over 300 metres long, between 0.9 and 1.7 metres high and 1.1 metres wide. An integrated, computer-controlled station was used for data collection, recording in digital form and on video tape. (Author).

  7. Quality Inspection of Printed Texts

    DEFF Research Database (Denmark)

    Pedersen, Jesper Ballisager; Nasrollahi, Kamal; Moeslund, Thomas B.

    2016-01-01

    Inspecting the quality of printed texts has its own importance in many industrial applications. To do so, this paper proposes a grading system which evaluates the performance of the printing task using some quality measures for each character and symbols. The purpose of these grading system is two......-folded: for costumers of the printing and verification system, the overall grade used to verify if the text is of sufficient quality, while for printer's manufacturer, the detailed character/symbols grades and quality measurements are used for the improvement and optimization of the printing task. The proposed system...

  8. Integrated method of mask data checking and inspection data prep for manufacturable mask inspection: inspection rule violations

    Science.gov (United States)

    McCall, Joan; Reddy, Vinod; Kim, Hyung M.; Babasa, Mark

    2002-03-01

    Many mask patterns contain small un-inspectable features (Inspection Rule Violations or IRVs) that create significant through-put time (TPT) impact at mask inspection due to excessive false defects. These small features include a) drawn test designs purposely intended to be small for evaluating process capabilities, and b) un-intended small features that result from errors such as overlap of designs, gaps between cells or synthesis errors. Typically, an IRV is a feature smaller than the minimum feature size capability of the mask inspection tool. This paper describes an integrated method to find such IRVs in the data and either fix them or declare that area as not inspectable. The method includes documented drawn size limits for inspectability, data checks at drawn level, data checks at post-fracture, and functions to define 'Do Not Inspect Regions (DNIRs)' for any remaining IRVs in the data. Data checking at post-fracture must comprehend Optical Proximity Correction (OPC), which generates small features that are not IRVs. The defined DNIRs are listed in the jobdeck for automated inspection data preparation with no engineering intervention. The result is improved mask inspection TPT as well as early detection and correction of certain design or synthesis errors.

  9. Secure wireless knowledge management for intelligence analysis

    Science.gov (United States)

    Clark, Catherine H.; Spina, John; Corey, Michael

    2008-04-01

    Although more information than ever before is available to support the intelligence analyst, the vast proliferation of types of data, devices, and protocols makes it increasingly difficult to ensure that the right information is received by the right people at the right time. Analysts can rapidly shift between information overload and an information vacuum depending on their location and available equipment. The ability to securely manage and deliver critical knowledge and actionable intelligence to the analyst regardless of device configuration (bandwidth, processing speed, etc.), classification level or location in a reliable manner, would provide the analyst 24/7 access to useable information. There are several important components to an intuitive system that can provide timely information in a user-preferred manner. Two of these components: formatting information to accommodate the user's profiles and the identification of solutions to the problem of secure information delivery across multiple security levels, will be discussed in this paper.

  10. Artificial intelligence in nanotechnology

    Science.gov (United States)

    Sacha, G. M.; Varona, P.

    2013-11-01

    During the last decade there has been increasing use of artificial intelligence tools in nanotechnology research. In this paper we review some of these efforts in the context of interpreting scanning probe microscopy, the study of biological nanosystems, the classification of material properties at the nanoscale, theoretical approaches and simulations in nanoscience, and generally in the design of nanodevices. Current trends and future perspectives in the development of nanocomputing hardware that can boost artificial-intelligence-based applications are also discussed. Convergence between artificial intelligence and nanotechnology can shape the path for many technological developments in the field of information sciences that will rely on new computer architectures and data representations, hybrid technologies that use biological entities and nanotechnological devices, bioengineering, neuroscience and a large variety of related disciplines.

  11. Animal intelligence as encephalization.

    Science.gov (United States)

    Jerison, H J

    1985-02-13

    There is no consensus on the nature of animal intelligence despite a century of research, though recent work on cognitive capacities of dolphins and great apes seems to be on one right track. The most precise quantitative analyses have been of relative brain size, or structural encephalization, undertaken to find biological correlates of mind in animals. Encephalization and its evolution are remarkably orderly, and if the idea of intelligence were unknown it would have to be invented to explain encephalization. The scientific question is: what behaviour or dimensions of behaviour evolved when encephalization evolved? The answer: the relatively unusual behaviours that require increased neural information processing capacity, beyond that attributable to differences among species in body size. In this perspective, the different behaviours that depend on augmented processing capacity in different species are evidence of different intelligences (in the plural) that have evolved.

  12. Artificial intelligence in nanotechnology.

    Science.gov (United States)

    Sacha, G M; Varona, P

    2013-11-15

    During the last decade there has been increasing use of artificial intelligence tools in nanotechnology research. In this paper we review some of these efforts in the context of interpreting scanning probe microscopy, the study of biological nanosystems, the classification of material properties at the nanoscale, theoretical approaches and simulations in nanoscience, and generally in the design of nanodevices. Current trends and future perspectives in the development of nanocomputing hardware that can boost artificial-intelligence-based applications are also discussed. Convergence between artificial intelligence and nanotechnology can shape the path for many technological developments in the field of information sciences that will rely on new computer architectures and data representations, hybrid technologies that use biological entities and nanotechnological devices, bioengineering, neuroscience and a large variety of related disciplines.

  13. Fast Industrial Inspection of Optical Thin Film Using Optical Coherence Tomography

    Directory of Open Access Journals (Sweden)

    Muhammad Faizan Shirazi

    2016-09-01

    Full Text Available An application of spectral domain optical coherence tomography (SD-OCT was demonstrated for a fast industrial inspection of an optical thin film panel. An optical thin film sample similar to a liquid crystal display (LCD panel was examined. Two identical SD-OCT systems were utilized for parallel scanning of a complete sample in half time. Dual OCT inspection heads were utilized for transverse (fast scanning, while a stable linear motorized translational stage was used for lateral (slow scanning. The cross-sectional and volumetric images of an optical thin film sample were acquired to detect the defects in glass and other layers that are difficult to observe using visual inspection methods. The rapid inspection enabled by this setup led to the early detection of product defects on the manufacturing line, resulting in a significant improvement in the quality assurance of industrial products.

  14. Intelligent hand-portable proliferation sensing system

    Energy Technology Data Exchange (ETDEWEB)

    Dieckman, S.L.; Bostrom, G.A.; Waterfield, L.G.; Jendrzejczyk, J.A.; Ahuja, S.; Raptis, A.C.

    1997-08-01

    Argonne National Laboratory, with support from DOE`s Office of Nonproliferation and National Security, is currently developing an intelligent hand-portable sensor system. This system is designed specifically to support the intelligence community with the task of in-field sensing of nuclear proliferation and related activities. Based upon pulsed laser photo-ionization time-of-flight mass spectrometry technology, this novel sensing system is capable of quickly providing a molecular or atomic analysis of specimens. The system is capable of analyzing virtually any gas phase molecule, or molecule that can be induced into the gas phase by (for example) sample heating. This system has the unique advantages of providing unprecedented portability, excellent sensitivity, tremendous fieldability, and a high performance/cost ratio. The system will be capable of operating in a highly automated manner for on-site inspections, and easily modified for other applications such as perimeter monitoring aboard a plane or drone. The paper describes the sensing system.

  15. Intelligent Component Monitoring for Nuclear Power Plants

    Energy Technology Data Exchange (ETDEWEB)

    Lefteri Tsoukalas

    2010-07-30

    Reliability and economy are two major concerns for a nuclear power generation system. Next generation nuclear power reactors are being developed to be more reliable and economic. An effective and efficient surveillance system can generously contribute toward this goal. Recent progress in computer systems and computational tools has made it necessary and possible to upgrade current surveillance/monitoring strategy for better performance. For example, intelligent computing techniques can be applied to develop algorithm that help people better understand the information collected from sensors and thus reduce human error to a new low level. Incidents incurred from human error in nuclear industry are not rare and have been proven costly. The goal of this project is to develop and test an intelligent prognostics methodology for predicting aging effects impacting long-term performance of nuclear components and systems. The approach is particularly suitable for predicting the performance of nuclear reactor systems which have low failure probabilities (e.g., less than 10-6 year-). Such components and systems are often perceived as peripheral to the reactor and are left somewhat unattended. That is, even when inspected, if they are not perceived to be causing some immediate problem, they may not be paid due attention. Attention to such systems normally involves long term monitoring and possibly reasoning with multiple features and evidence, requirements that are not best suited for humans.

  16. Understanding the Globalization of Intelligence

    DEFF Research Database (Denmark)

    Svendsen, Adam David Morgan

    "This book provides an introduction to the complexities of contemporary Western Intelligence and its dynamics during an era of globalization. Towards an understanding of the globalization of intelligence process, Svendsen focuses on the secretive phenomenon of international or foreign intelligence...... cooperation ('liaison'), as it occurs in both theory and practice. Reflecting a complex coexistence plurality of several different and overlapping concepts in action, the challenging process of the globalization of intelligence emerges as essential for complex issue management purposes during a globalized era...

  17. Artificial Intelligence and Economic Theories

    OpenAIRE

    Marwala, Tshilidzi; Hurwitz, Evan

    2017-01-01

    The advent of artificial intelligence has changed many disciplines such as engineering, social science and economics. Artificial intelligence is a computational technique which is inspired by natural intelligence such as the swarming of birds, the working of the brain and the pathfinding of the ants. These techniques have impact on economic theories. This book studies the impact of artificial intelligence on economic theories, a subject that has not been extensively studied. The theories that...

  18. Does Intelligence Provide Survival Value?

    OpenAIRE

    Cairns, John

    2009-01-01

    Intelligence is defined as a general mental capacity to reason, plan, solve problems, think abstractly, comprehend ideas, and learn. Intelligence can also be defined as the ability to acquire and apply information gathered from the environment to modify its behavior. It is this intelligence that has allowed the genus Homo to survive for 2 million years. However, recently the global financial meltdown and the deleterious effects of climate change raise the question of whether intelligence has ...

  19. Does Intelligence Always Guarantee Performance?

    OpenAIRE

    Uzma Hanif Gondal; Zeeshan Ali

    2013-01-01

    The current research is intended to explore the individuals’ cognitive intelligence and its impact on their performance. The study examines the intellectual capabilities of employees in reference to the problems that arises due to the interaction with varying job related tasks. Raven’s progressive matrices were used to measure the IQ level of employees. This IQ test was intended to measure the non-verbal intelligence, spatial intelligence, mathematical and logical intelligence of employees. I...

  20. Harmonizing intelligence terminologies in business: Literature review

    Directory of Open Access Journals (Sweden)

    Sivave Mashingaidze

    2014-11-01

    Full Text Available The principal objective of this article is to do a literature review of different intelligence terminology with the aim of establishing the common attributes and differences, and to propose a universal and comprehensive definition of intelligence for common understanding amongst users. The findings showed that Competitive Intelligence has the broadest scope of intelligence activities covering the whole external operating environment of the company and targeting all levels of decision-making for instance; strategic intelligence, tactical intelligence and operative intelligence. Another terminology was found called Cyber IntelligenceTM which encompasses competitor intelligence, strategic intelligence, market intelligence and counterintelligence. In conclusion although CI has the broadest scope of intelligence and umbrella to many intelligence concepts, still Business Intelligence, and Corporate Intelligence are often used interchangeably as CI

  1. System Enhancements for Mechanical Inspection Processes

    Science.gov (United States)

    Hawkins, Myers IV

    2011-01-01

    Quality inspection of parts is a major component to any project that requires hardware implementation. Keeping track of all of the inspection jobs is essential to having a smooth running process. By using HTML, the programming language ColdFusion, and the MySQL database, I created a web-based job management system for the 170 Mechanical Inspection Group that will replace the Microsoft Access based management system. This will improve the ways inspectors and the people awaiting inspection view and keep track of hardware as it is in the inspection process. In the end, the management system should be able to insert jobs into a queue, place jobs in and out of a bonded state, pre-release bonded jobs, and close out inspection jobs.

  2. System for inspection of stacked cargo containers

    Science.gov (United States)

    Derenzo, Stephen [Pinole, CA

    2011-08-16

    The present invention relates to a system for inspection of stacked cargo containers. One embodiment of the invention generally comprises a plurality of stacked cargo containers arranged in rows or tiers, each container having a top, a bottom a first side, a second side, a front end, and a back end; a plurality of spacers arranged in rows or tiers; one or more mobile inspection devices for inspecting the cargo containers, wherein the one or more inspection devices are removeably disposed within the spacers, the inspection means configured to move through the spacers to detect radiation within the containers. The invented system can also be configured to inspect the cargo containers for a variety of other potentially hazardous materials including but not limited to explosive and chemical threats.

  3. Reliable data acquisition for inspection systems

    Science.gov (United States)

    Silva, V. P.; Silva, D. S.; Boccardo, D. R.; Machado, R. C. S.; Carmo, L. F. R. C.

    2015-01-01

    In Brazil, the road transportation of dangerous goods is subject to regulatory control, which is conducted by Inmetro, the National Institute of Metrology, Quality and Technology. Currently, the process of monitoring such inspections is done manually, leaving the possibility of some inconsistencies: inspections held outside the authorized local inspection, incorrectly, incompletely, or even be held. Thus, in order to increase the reliability of such inspections, it is needed a closer monitoring by the regulatory agency. One approach towards that, is the implementation of an automated process in which evidences are collected in a reliable way during the inspections, enabling further analyses. This work employs security mechanisms on a portable device to ensure the confidence of the evidences collected during an inspection, paving the way for later more robust analyzes.

  4. Intelligent Freigth Transport Systems

    DEFF Research Database (Denmark)

    Overø, Helene Martine; Larsen, Allan; Røpke, Stefan

    2009-01-01

    The Danish innovation project entitled “Intelligent Freight Transport Systems” aims at developing prototype systems integrating public intelligent transport systems (ITS) with the technology in vehicles and equipment as well as the IT-systems at various transport companies. The objective...... is to enhance the efficiency and lower the environmental impact in freight transport. In this paper, a pilot project involving real-time waste collection at a Danish waste collection company is described, and a solution approach is proposed. The problem corresponds to the dynamic version of the waste collection...

  5. Bayesian artificial intelligence

    CERN Document Server

    Korb, Kevin B

    2003-01-01

    As the power of Bayesian techniques has become more fully realized, the field of artificial intelligence has embraced Bayesian methodology and integrated it to the point where an introduction to Bayesian techniques is now a core course in many computer science programs. Unlike other books on the subject, Bayesian Artificial Intelligence keeps mathematical detail to a minimum and covers a broad range of topics. The authors integrate all of Bayesian net technology and learning Bayesian net technology and apply them both to knowledge engineering. They emphasize understanding and intuition but also provide the algorithms and technical background needed for applications. Software, exercises, and solutions are available on the authors' website.

  6. Artificial intelligence in cardiology.

    Science.gov (United States)

    Bonderman, Diana

    2017-12-01

    Decision-making is complex in modern medicine and should ideally be based on available data, structured knowledge and proper interpretation in the context of an individual patient. Automated algorithms, also termed artificial intelligence that are able to extract meaningful patterns from data collections and build decisions upon identified patterns may be useful assistants in clinical decision-making processes. In this article, artificial intelligence-based studies in clinical cardiology are reviewed. The text also touches on the ethical issues and speculates on the future roles of automated algorithms versus clinicians in cardiology and medicine in general.

  7. Dental ethics and emotional intelligence.

    Science.gov (United States)

    Rosenblum, Alvin B; Wolf, Steve

    2014-01-01

    Dental ethics is often taught, viewed, and conducted as an intell enterprise, uninformed by other noncognitive factors. Emotional intelligence (EQ) is defined distinguished from the cognitive intelligence measured by Intelligence Quotient (IQ). This essay recommends more inclusion of emotional, noncognitive input to the ethical decision process in dental education and dental practice.

  8. Emotional Intelligence and Interpersonal Relations.

    Science.gov (United States)

    Schutte, Nicola S.; Malouff, John M.; Bobik, Chad; Coston, Tracie D.; Greeson, Cyndy; Jedlicka, Christina; Rhodes, Emily; Wendorf, Greta

    2001-01-01

    Presents the results of seven studies that focused on the link between emotional intelligence and interpersonal relations. Tests emotional intelligence with empathy and self-monitoring, social skills, cooperation, relations with others, and marital satisfaction. Explores preference for emotionally intelligent partners in the final study. Includes…

  9. Getting Specific about Multiple Intelligences.

    Science.gov (United States)

    Hatch, Thomas

    1997-01-01

    Howard Gardner's theory of multiple intelligences ignores certain assumptions about the nature, display, and development of intelligence. Instead of determining how many intelligences a child displays, educators must observe the kinds of activities and roles in which the child shows strength. Teachers should organize curricula around the child,…

  10. Competitive Intelligence and Social Advantage.

    Science.gov (United States)

    Davenport, Elisabeth; Cronin, Blaise

    1994-01-01

    Presents an overview of issues concerning civilian competitive intelligence (CI). Topics discussed include competitive advantage in academic and research environments; public domain information and libraries; covert and overt competitive intelligence; data diversity; use of the Internet; cooperative intelligence; and implications for library and…

  11. Political Orientations, Intelligence and Education

    Science.gov (United States)

    Rindermann, Heiner; Flores-Mendoza, Carmen; Woodley, Michael A.

    2012-01-01

    The social sciences have traditionally assumed that education is a major determinant of citizens' political orientations and behavior. Several studies have also shown that intelligence has an impact. According to a theory that conceptualizes intelligence as a "burgher" (middle-class, civil) phenomenon--intelligence should promote civil…

  12. Imagery Intelligence (IMINT) Production Model

    Science.gov (United States)

    1980-01-01

    Intelligence Analysis ,’ which is aimed at constructing a model of the cognitive processes underlying intelligence analysis . The approach to constructing...generalizing to multisource analysis. For the purposes of this investigation, intelligence analysis was defined as a spectrum of analytical judgmental activities

  13. Fit to fight or unfit for the purpose? : a review of the effectiveness of the Intelligence Cycle in UK counter-terrorism, 2003-2013

    OpenAIRE

    Burke, Paul

    2014-01-01

    The Intelligence process has increasingly found itself in the public eye in modern times. The Al Qa’eda attacks against the USA in September 2001 led to a rapid spread of other international terrorist attacks. The invasion of Afghanistan occurred soon afterwards, followed by the invasion of Iraq in 2003. All of this resulted in the Intelligence community and their processes being pushed into the spotlight of the global media. Central to all Intelligence work is the Intelligence cycle, in what...

  14. Package inspection using inverse diffraction

    Science.gov (United States)

    McAulay, Alastair D.

    2008-08-01

    More efficient cost-effective hand-held methods of inspecting packages without opening them are in demand for security. Recent new work in TeraHertz sources,1 millimeter waves, presents new possibilities. Millimeter waves pass through cardboard and styrofoam, common packing materials, and also pass through most materials except those with high conductivity like metals which block light and are easily spotted. Estimating refractive index along the path of the beam through the package from observations of the beam passing out of the package provides the necessary information to inspect the package and is a nonlinear problem. So we use a generalized linear inverse technique that we first developed for finding oil by reflection in geophysics.2 The computation assumes parallel slices in the packet of homogeneous material for which the refractive index is estimated. A beam is propagated through this model in a forward computation. The output is compared with the actual observations for the package and an update computed for the refractive indices. The loop is repeated until convergence. The approach can be modified for a reflection system or to include estimation of absorption.

  15. User interface inspection methods a user-centered design method

    CERN Document Server

    Wilson, Chauncey

    2014-01-01

    User Interface Inspection Methods succinctly covers five inspection methods: heuristic evaluation, perspective-based user interface inspection, cognitive walkthrough, pluralistic walkthrough, and formal usability inspections. Heuristic evaluation is perhaps the best-known inspection method, requiring a group of evaluators to review a product against a set of general principles. The perspective-based user interface inspection is based on the principle that different perspectives will find different problems in a user interface. In the related persona-based inspection, colleagues assume the

  16. Non-Destructive Inspection Lab (NDI)

    Data.gov (United States)

    Federal Laboratory Consortium — The NDI specializes in applied research, development and performance of nondestructive inspection procedures (flourescent penetrant, magnetic particle, ultrasonics,...

  17. Rapid Prototyping

    Science.gov (United States)

    1999-01-01

    Javelin, a Lone Peak Engineering Inc. Company has introduced the SteamRoller(TM) System as a commercial product. The system was designed by Javelin during a Phase II NASA funded small commercial product. The purpose of the invention was to allow automated-feed of flexible ceramic tapes to the Laminated Object Manufacturing rapid prototyping equipment. The ceramic material that Javelin was working with during the Phase II project is silicon nitride. This engineered ceramic material is of interest for space-based component.

  18. Walking Posture Control of Transmission Line Single Arm Inspection Robot

    Science.gov (United States)

    Yan, Yu; Liu, Xiaqing; Li, Jinliang; Ou, Yuexiong

    2017-07-01

    To control the walking posture according to transmission line single arm inspection robot, the robot is divided into normal walking and climbing walking two state, and gives the definition, then based on the state space method of state variable feedback and PD control method is used to control the two states, two kinds of control method of simulation by using Matlab, in the end, the two control methods proposed is validated in the actual circuit structures. The results show that, the proposed control method is rapid and effective, and can meet the needs of practical application.

  19. Priming Ability Emotional Intelligence

    Science.gov (United States)

    Schutte, Nicola S.; Malouff, John M.

    2012-01-01

    Two studies examined whether priming self-schemas relating to successful emotional competency results in better emotional intelligence performance. In the first study participants were randomly assigned to a successful emotional competency self-schema prime condition or a control condition and then completed an ability measure of emotional…

  20. Splunk operational intelligence cookbook

    CERN Document Server

    Diakun, Josh; Mock, Derek

    2014-01-01

    This book is intended for users of all levels who are looking to leverage the Splunk Enterprise platform as a valuable operational intelligence tool. The recipes provided in this book will appeal to individuals from all facets of a business - IT, Security, Product, Marketing, and many more!

  1. Intelligent Environmental Nanomaterials

    KAUST Repository

    Chang, Jian

    2018-01-30

    Due to the inherent complexity of environmental problems, especially water and air pollution, the utility of single-function environmental nanomaterials used in conventional and unconventional environmental treatment technologies are gradually reaching their limits. Intelligent nanomaterials with environmentally-responsive functionalities have shown potential to improve the performance of existing and new environmental technologies. By rational design of their structures and functionalities, intelligent nanomaterials can perform different tasks in response to varying application scenarios for the purpose of achieving the best performance. This review offers a critical analysis of the design concepts and latest progresses on the intelligent environmental nanomaterials in filtration membranes with responsive gates, materials with switchable wettability for selective and on-demand oil/water separation, environmental materials with self-healing capability, and emerging nanofibrous air filters for PM2.5 removal. We hope that this review will inspire further research efforts to develop intelligent environmental nanomaterials for the enhancement of the overall quality of environmental or human health.

  2. Intelligence and Prosocial Behavior

    DEFF Research Database (Denmark)

    Han, Ru; Shi, Jiannong; Yong, W.

    2012-01-01

    Results of prev ious studies of the relationship between prosocial behav ior and intelligence hav e been inconsistent. This study attempts to distinguish the dif f erences between sev eral prosocial tasks, and explores the way s in which cognitiv e ability inf luences prosocial behav ior. In Stud...

  3. Distributed intelligence at CELLO

    CERN Document Server

    de Boer, Wim

    1981-01-01

    Describes the use of distributed intelligence at CELLO, a large 4 pi detector at PETRA. Besides spectral purpose hardware processors for online calibration and reformatting of data, several microcomputers are used for monitoring and testing the various detector components. (6 refs).

  4. Emotional Intelligence in Education

    Science.gov (United States)

    Fernandez-Berrocal, Pablo; Ruiz, Desiree

    2008-01-01

    Emotional intelligence (EI) has emerged in the past twenty five years as one of the crucial components of emotional adjustment, personal well-being, life success, and interpersonal relationships in different contexts of everyday life. This article provides a critical review of the research field of EI in the school context and analyzes its present…

  5. Genetical background of intelligence

    Directory of Open Access Journals (Sweden)

    Anna Junkiert-Czarnecka

    2016-06-01

    Full Text Available Intelligence as an ability to reason, think abstractly and adapt effectively to the environment is a subject of research in the field of psychology, neurobiology, and in the last twenty years genetics as well. Genetical testing of twins carried out from XX century indicated heritebility of intelligence, therefore confirmed an influence of genetic factor on cognitive processes. Studies on genetic background of intelligence focus on dopaminergic (DRD2, DRD4, COMT, SLC6A3, DAT1, CCKAR and adrenergic system (ADRB2, CHRM2 genes as well as, neutrofins (BDNF and oxidative stress genes (LTF, PRNP. Positive effect of investigated gene polymorphism was indicated by variation c.957C>T DRD2 gene (if in polymorphic site is thymine, polymorphism c.472G>A COMT gene (presence of adenine and also gene ADRB2 c.46A->G (guanine, CHRM2 (thymine in place c.1890A>T and BDNF (guanine in place c.472G>A Obtained results indicate that intelligence is a feature dependent not only on genetic but also an environmental factor.

  6. Genetical background of intelligence.

    Science.gov (United States)

    Junkiert-Czarnecka, Anna; Haus, Olga

    2016-06-13

    Intelligence as an ability to reason, think abstractly and adapt effectively to the environment is a subject of research in the field of psychology, neurobiology, and in the last twenty years genetics as well. Genetical testing of twins carried out from XX century indicated heritebility of intelligence, therefore confirmed an influence of genetic factor on cognitive processes. Studies on genetic background of intelligence focus on dopaminergic (DRD2, DRD4, COMT, SLC6A3, DAT1, CCKAR) and adrenergic system (ADRB2, CHRM2) genes as well as, neutrofins (BDNF) and oxidative stress genes (LTF, PRNP). Positive effect of investigated gene polymorphism was indicated by variation c.957C>T DRD2 gene (if in polymorphic site is thymine), polymorphism c.472G>A COMT gene (presence of adenine) and also gene ADRB2 c.46A->G (guanine), CHRM2 (thymine in place c.1890A>T) and BDNF (guanine in place c.472G>A) Obtained results indicate that intelligence is a feature dependent not only on genetic but also an environmental factor.

  7. Intelligent information management systems

    Energy Technology Data Exchange (ETDEWEB)

    Wong, J.S. [ed.

    1996-12-31

    Reports are presented from the International Conference on Intelligent Information Management Systems held June 5-7, 1996. Topics are included on information management, database management systems, information technology, and knowledge based systems. Individual projects have been processed separately for the United States Department of Energy databases.

  8. Intelligent Data Reduction (IDARE)

    Science.gov (United States)

    Brady, D. Michael; Ford, Donnie R.

    1990-01-01

    A description of the Intelligent Data Reduction (IDARE) expert system and an IDARE user's manual are given. IDARE is a data reduction system with the addition of a user profile infrastructure. The system was tested on a nickel-cadmium battery testbed. Information is given on installing, loading, maintaining the IDARE system.

  9. Multiple Intelligences: A Collection.

    Science.gov (United States)

    Fogarty, Robin, Ed.; Bellanca, James, Ed.

    As a concise resource for Howard Gardner's theory of multiple intelligences and its implications for schooling around the world, this collection is designed for educators, parents, and others interested in education. The first section discusses Gardner and his background, and the second section expounds his theory. The third section explores the…

  10. Hybrid intelligent engineering systems

    CERN Document Server

    Jain, L C; Adelaide, Australia University of

    1997-01-01

    This book on hybrid intelligent engineering systems is unique, in the sense that it presents the integration of expert systems, neural networks, fuzzy systems, genetic algorithms, and chaos engineering. It shows that these new techniques enhance the capabilities of one another. A number of hybrid systems for solving engineering problems are presented.

  11. Generality in Artificial Intelligence

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 19; Issue 3. Generality in Artificial Intelligence. John McCarthy. Classics Volume 19 Issue 3 March 2014 pp 283-296. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/019/03/0283-0296. Author Affiliations.

  12. Artificial intelligence within AFSC

    Science.gov (United States)

    Gersh, Mark A.

    1990-01-01

    Information on artificial intelligence research in the Air Force Systems Command is given in viewgraph form. Specific research that is being conducted at the Rome Air Development Center, the Space Technology Center, the Human Resources Laboratory, the Armstrong Aerospace Medical Research Laboratory, the Armamant Laboratory, and the Wright Research and Development Center is noted.

  13. Clinical Process Intelligence

    DEFF Research Database (Denmark)

    Vilstrup Pedersen, Klaus

    2006-01-01

    .e. local guidelines. From a knowledge management point of view, this externalization of generalized processes, gives the opportunity to learn from, evaluate and optimize the processes. "Clinical Process Intelligence" (CPI), will denote the goal of getting generalized insight into patient centered health...

  14. Toepassen van Business Intelligence

    NARCIS (Netherlands)

    Z.F.M. (Rien) Hamers

    2004-01-01

    Het is niet altijd even duidelijk wat het begrip 'business intelligence' precies inhoudt. BI kent namelijk een diversiteit aan definities en is vanuit verschillende organisatorische en ICT-disciplines te benaderen. Deze checklist wil deze aanpak op pragmatische maar toch intelligente wijze

  15. Intelligent Data Analysis in the EMERCOM Information System

    Science.gov (United States)

    Elena, Sharafutdinova; Tatiana, Avdeenko; Bakaev, Maxim

    2017-01-01

    The paper describes an information system development project for the Russian Ministry of Emergency Situations (MES, whose international operations body is known as EMERCOM), which was attended by the representatives of both the IT industry and the academia. Besides the general description of the system, we put forward OLAP and Data Mining-based approaches towards the intelligent analysis of the data accumulated in the database. In particular, some operational OLAP reports and an example of multi-dimensional information space based on OLAP Data Warehouse are presented. Finally, we outline Data Mining application to support decision-making regarding security inspections planning and results consideration.

  16. Exploring Possible Neural Mechanisms of Intelligence Differences Using Processing Speed and Working Memory Tasks: An fMRI Study

    Science.gov (United States)

    Waiter, Gordon D.; Deary, Ian J.; Staff, Roger T.; Murray, Alison D.; Fox, Helen C.; Starr, John M.; Whalley, Lawrence J.

    2009-01-01

    To explore the possible neural foundations of individual differences in intelligence test scores, we examined the associations between Raven's Matrices scores and two tasks that were administered in a functional magnetic resonance imaging (fMRI) setting. The two tasks were an n-back working memory (N = 37) task and inspection time (N = 47). The…

  17. Strategic Intelligence in a globalized world in Latin America: Challenges in the XXI century

    Directory of Open Access Journals (Sweden)

    Boris Saavedra

    2016-02-01

    Full Text Available In general, intelligence has been classified as something mysterious due to the historical experiences in Latin America and the general ignorance about the true essence of intelligence as a primary activity of the State. This paper focuses on the analysis of the role of strategic intelligence as a fundamental element of public security and defense policy of a nation in Latin America. The changes occurring at the dawn of this century for the collection and analysis of intelligence are critical. The analysis of power, internet, digital technology, robotics and intelligent computers is responsible for the rapid changes of our history. Strategic Intelligence requires a comprehensive operational reform in five points: 1 Distinction as far as competition of intelligence agencies is concerned. 2 The dependence of the intelligence agencies. 3 Limiting the allocation of responsibility for domestic intelligence. 4 Establishing a coordinating body at the highest level of the State and 5 Effective external controls. These aspects are essential for a strategic intelligence system in line with present and future demands.

  18. Personalized healthcare through intelligent gadgets.

    Science.gov (United States)

    Jang, Hyeju; Kim, Sanghyun; Bae, Changseok

    2008-01-01

    An intelligent gadget is a wearable platform which is reconfigurable, scalable, and component-based and which can be equipped, carried as a personal accessory, or in a certain case, implanted internally into a body. Various kinds of personal information can be gathered with intelligent gadgets, and that information is used to provide specially personalized services to people in the ubiquitous computing environment. In this paper, we show a personalized healthcare service through intelligent gadgets. A service based on intelligent gadgets can be built intuitively and easily with a context representation language, called the intelligent gadget markup language (IGML) based on the event-condition-action (ECA) rule. The inherent nature of extensibility, not only environmental information but also physiological information can be specified as a context in IGML and can be dealt with an intelligent gadget with ease. It enables intelligent gadgets to be adopted to many different kinds of personalized healthcare services.

  19. Demonstration of Parallel Scanning Probe Microscope for high throughput metrology and inspection

    NARCIS (Netherlands)

    Sadeghian Marnani, H.; Dekker, A.; Herfst, R.W.; Winters, J.; Eigenraam, A.B.C.; Rijnbeek, R.A.; Nulkes, N.

    2015-01-01

    With the device dimensions moving towards the 1X node and below, the semiconductor industry is rapidly approaching the point where existing metrology, inspection and review tools face huge challenges in terms of resolution, the ability to resolve 3D and the throughput. Due to the advantages of

  20. Real-time near-infrared spectroscopic inspection system for adulterated sesame oil

    Science.gov (United States)

    Sesame seed oil is popular and expensive in Korea and has been often mixed with other less expensive vegetable oils. The objective of this research is to develop an economical and rapid adulteration determination system for sesame seed oil mixed with other vegetable oils. A recent inspection system ...

  1. 9 CFR 381.71 - Condemnation on ante mortem inspection.

    Science.gov (United States)

    2010-01-01

    ... AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY... Condemnation on ante mortem inspection. (a) Birds plainly showing on ante mortem inspection any disease or... mortem inspection, shall be condemned. Birds which on ante mortem inspection are condemned shall not be...

  2. 46 CFR 107.259 - Crane inspection and testing.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Crane inspection and testing. 107.259 Section 107.259... INSPECTION AND CERTIFICATION Inspection and Certification § 107.259 Crane inspection and testing. (a) Each crane must be inspected and tested in accordance with Section 3 of the American Petroleum Institute (A.P...

  3. 15 CFR 716.4 - Scope and conduct of inspections.

    Science.gov (United States)

    2010-01-01

    ... of whether the Inspection Team's request to inspect any area, building, item or record is reasonable... Inspection Team and Host Team with a pre-inspection briefing on the facility, the activities carried out... and requirements. In carrying out their activities, the Inspection Team and Host Team shall observe...

  4. Surface inspection using FTIR spectroscopy

    Science.gov (United States)

    Powell, G. L.; Smyrl, N. R.; Williams, D. M.; Meyers, H. M., III; Barber, T. E.; Marrero-Rivera, M.

    1995-03-01

    The use of reflectance Fourier transform infrared (FTIR) spectroscopy as a tool for surface inspection is described. Laboratory instruments and portable instruments can support remote sensing probes that can map chemical contaminants on surfaces with detection limits under the best of conditions in the sub-nanometer range, i.e.. near absolute cleanliness, excellent performance in the sub-micrometer range, and useful performance for films tens of microns thick. Examples of discovering and quantifying contamination such as mineral oils and greases, vegetable oils, and silicone oils on aluminum foil, galvanized sheet steel, smooth aluminum tubing, and sandblasted 7075 aluminum alloy and D6AC steel. The ability to map in time and space the distribution of oil stains on metals is demonstrated. Techniques associated with quantitatively applying oils to metals, subsequently verifying the application, and non-linear relationships between reflectance and the quantity oil are described.

  5. Working session 2: Tubing inspection

    Energy Technology Data Exchange (ETDEWEB)

    Guerra, J. [Tecnatom, S.A. San Sebastian de los Reyes, Madrid (Spain); Tapping, R.L. [AECL, Chalk River, Ontario (Canada)

    1997-02-01

    This session was attended by delegates from 10 countries, and four papers were presented. A wide range of issues was tabled for discussion. Realizing that there was limited time available for more detailed discussion, three topics were chosen for the more detailed discussion: circumferential cracking, performance demonstration (to focus on POD and sizing), and limits of methods. Two other subsessions were organized: one dealt with some challenges related to the robustness of current inspection methods, especially with respect to leaving cracked tubes in service, and the other with developing a chart of current NDE technology with recommendations for future development. These three areas are summarized in turn, along with conclusions and/or recommendations. During the discussions there were four presentations. There were two (Canada, Japan) on eddy current probe developments, both of which addressed multiarray probes that would detect a range of flaws, one (Spain) on circumferential crack detection, and one (JRC, Petten) on the recent PISC III results.

  6. Flexible ultrasonic pipe inspection apparatus

    Science.gov (United States)

    Jenkins, Charles F.; Howard, Boyd D.

    1998-01-01

    A flexible, modular ultrasonic pipe inspection apparatus, comprising a flexible, hollow shaft that carries a plurality of modules, including at least one rotatable ultrasonic transducer, a motor/gear unit, and a position/signal encoder. The modules are connected by flexible knuckle joints that allow each module of the apparatus to change its relative orientation with respect to a neighboring module, while the shaft protects electrical wiring from kinking or buckling while the apparatus moves around a tight corner. The apparatus is moved through a pipe by any suitable means, including a tether or drawstring attached to the nose or tail, differential hydraulic pressure, or a pipe pig. The rotational speed of the ultrasonic transducer and the forward velocity of the apparatus are coordinated so that the beam sweeps out the entire interior surface of the pipe, enabling the operator to accurately assess the condition of the pipe wall and determine whether or not leak-prone corrosion damage is present.

  7. Visual Inspection for Caries Detection

    DEFF Research Database (Denmark)

    Gimenez, T; Piovesan, C; Braga, M M

    2015-01-01

    July 2014 to identify published and nonpublished studies in English. Studies of visual inspection were included that 1) assessed accuracy of the method in detecting caries lesions; 2) were performed on occlusal, proximal, or free smooth surfaces in primary or permanent teeth; 3) had a reference...... (from 5,808 articles initially identified) and 1 abstract (from 168) met the inclusion criteria. In general, the analysis demonstrated that the visual method had good accuracy for detecting caries lesions. Although laboratory and clinical studies have presented similar accuracy, clinically obtained...... caries detection method has good overall performance. Furthermore, although the identified studies had high heterogeneity and risk of bias, the use of detailed and validated indices seems to improve the accuracy of the method....

  8. Modifications to the INSPECT model

    Energy Technology Data Exchange (ETDEWEB)

    Dickinson, S. [AEA Technology, Winfrith (United Kingdom); Sims, H.E. [AEA Technology, Harwell (United Kingdom)

    1996-12-01

    The prediction of iodine behaviour in the containment of a PWR following a loss of coolant accident requires a reliable model of the chemistry of iodine in aqueous solution. The INSPECT model, which was developed several years ago, contains a large number of the relevant chemical reactions of iodine and water radiation chemistry. Since the reactions set was first assembled, however, new data on rate constants and mechanisms have become available. In addition, the application of the model to various small-scale experiments has revealed problems in the modelling of some reactions, leading to an under-prediction of the iodine volatility at high pH, although the experiments have demonstrated that the high pH volatility remains satisfactory low. This paper describes the modifications which have been made to the INSPECT model to take account of new data and to improve the modelling where appropriate. The main changes which have been made to the reaction set are as follows: - The rate constants and activation energies for the reactions describing the radiolysis of water have been updated in with recent assessments, and the temperature dependence of the G value for the primary species have been accordance taken into account, - The mechanism and rates of I{sub 2} hydrolysis have been modified in accordance with the latest assessments of this reaction, - The mechanism for the reaction of I{sub 2} with H{sub 2}O{sub 2} has been changed to a form which produces a more realistic pH dependence under neutral and alkaline conditions, - An addition mechanism for the disproportionation of the O{sub 2} ion has been included, reflecting experimental observations that this reaction has a significant first-order component under all but the purest conditions, - Atomic I is treated as a volatile species, with a partition coefficient of 1.9 at 298 K. (Abstract Truncated)

  9. Architecture for Multiple Interacting Robot Intelligences

    Science.gov (United States)

    Peters, Richard Alan, II (Inventor)

    2008-01-01

    An architecture for robot intelligence enables a robot to learn new behaviors and create new behavior sequences autonomously and interact with a dynamically changing environment. Sensory information is mapped onto a Sensory Ego-Sphere (SES) that rapidly identifies important changes in the environment and functions much like short term memory. Behaviors are stored in a database associative memory (DBAM) that creates an active map from the robot's current state to a goal state and functions much like long term memory. A dream state converts recent activities stored in the SES and creates or modifies behaviors in the DBAM.

  10. Automatic visual inspection of hybrid microcircuits

    Energy Technology Data Exchange (ETDEWEB)

    Hines, R.E.

    1980-05-01

    An automatic visual inspection system using a minicomputer and a video digitizer was developed for inspecting hybrid microcircuits (HMC) and thin-film networks (TFN). The system performed well in detecting missing components on HMCs and reduced the testing time for each HMC by 75%.

  11. 14 CFR 91.409 - Inspections.

    Science.gov (United States)

    2010-01-01

    ... Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR TRAFFIC... that carries a special flight permit, a current experimental certificate, or a light-sport or... equipment, and emergency equipment, is inspected in accordance with an inspection program selected under the...

  12. ANNUAL RADIOACTIVE WASTE TANK INSPECTION PROGRAM 2008

    Energy Technology Data Exchange (ETDEWEB)

    West, B.; Waltz, R.

    2009-06-11

    Aqueous radioactive wastes from Savannah River Site (SRS) separations and vitrification processes are contained in large underground carbon steel tanks. Inspections made during 2008 to evaluate these vessels and other waste handling facilities along with evaluations based on data from previous inspections are the subject of this report.

  13. Simultaneous inspection of several product characteristics

    NARCIS (Netherlands)

    Arts, G.R.J.; Albers, Willem/Wim; Kallenberg, W.C.M.

    2001-01-01

    In this paper we consider 100% inspection of a product of which several characteristics have to satisfy given specification limits. A 100% inspection procedure may be necessary to bring the percentage of nonconforming items down to a level acceptable for the consumer. If one can observe the actual

  14. 38 CFR 17.369 - Inspections.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Inspections. 17.369 Section 17.369 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Grants to the Republic of the Philippines § 17.369 Inspections. The U.S. Department of Veterans Affairs, through...

  15. Smart infrared inspection system field operational test.

    Science.gov (United States)

    2014-04-01

    The Smart InfraRed Inspection System (SIRIS) is a tool designed to assist inspectors in determining which vehicles : passing through the system are in need of further inspection by measuring the thermal data from the wheel : components. As a vehicle ...

  16. Safety and Inspection Planning of Older Installations

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Ersdal, G.

    2008-01-01

    (and coalescence of small cracks) and increased crack growth. This should imply shorter inspection time intervals for ageing structures. Different approaches for updating inspection plans for older installations are proposed. The most promisingmethod consists of increasing the rate of crack initiations...

  17. 9 CFR 590.28 - Other inspections.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Other inspections. 590.28 Section 590.28 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EGG... be made of imported eggs and egg products as required in this part. Relation to Other Authorities ...

  18. Annual radioactive waste tank inspection program - 1999

    Energy Technology Data Exchange (ETDEWEB)

    Moore, C.J.

    2000-04-14

    Aqueous radioactive wastes from Savannah River Site (SRS) separations processes are contained in large underground carbon steel tanks. Inspections made during 1999 to evaluate these vessels and auxiliary appurtenances along with evaluations based on data accrued by inspections performed since the tanks were constructed are the subject of this report.

  19. Actinic Mask Inspection at the ALS Initial Design Review

    Energy Technology Data Exchange (ETDEWEB)

    Barty, A; Chapman, H; Sweeney, D; Levesque, R; Bokor, J; Gullikson, E; Jong, S; Liu, Y; Yi, M; Denbeaux, G; Goldberg, K; Naulleau, P; Denham, P; Rekawa, S; Baston, P; Tackaberry, R; Barale, P

    2003-03-05

    configured so that the collected data emulates the aerial image of a stepper system, thereby enabling rapid evaluation of mask defects and patterning without the need for a resist exposure step. The main uses of the microscope in this mode would be: (a) Review of multilayer and pattern defects to determine their printability; (b) Defect review following a repair process to assess the success of the operation; (c) Investigation of the effects of illumination and NA on the printed image; (d) Process window analysis of defects and other mask features; and (e) Characterizing defects on both patterned and unpatterned masks (i.e. blanks). An essential characteristic of operation in this mode is that the illumination and imaging conditions through focus should emulate as accurately as possible that of a production stepper system. This mode is designed for local review of defects over a small sub-field of the mask; therefore it is not necessary to have the same high-speed throughput required for defect inspection mode. We first describe some technical background relating to EUV masks and defect scanning, with the aim of defining the context of the tool and experiments to be performed. We then present an overview of several candidate optical system configurations for achieve the above objectives, and analyze the ability of each system to achieve the stated project goals. Of key importance is throughput and sensitivity in inspection mode, whilst in AIM mode key points are spatial resolution and the ability to perform stepper emulation imaging. We then down-select the best candidate from this set of solutions to one system, which is then investigated in further detail with a view to producing a preliminary tool design and estimates of overall system performance.

  20. Underground pipe inspection device and method

    Energy Technology Data Exchange (ETDEWEB)

    Germata, Daniel Thomas [Wadsworth, IL

    2009-02-24

    A method and apparatus for inspecting the walls of an underground pipe from inside the pipe in which an inspection apparatus having a circular planar platform having a plurality of lever arms having one end pivotably attached to one side of the platform, having a pipe inspection device connected to an opposite end, and having a system for pivoting the lever arms is inserted into the underground pipe, with the inspection apparatus oriented with the planar platform disposed perpendicular to the pipe axis. The plurality of lever arms are pivoted toward the inside wall of the pipe, contacting the inside wall with each inspection device as the apparatus is conveyed along a length of the underground pipe.

  1. Review of progress in magnetic particle inspection

    Science.gov (United States)

    Eisenmann, David J.; Enyart, Darrel; Lo, Chester; Brasche, Lisa

    2014-02-01

    Magnetic particle inspection (MPI) has been widely utilized for decades, and sees considerable use in the aerospace industry with a majority of the steel parts being inspected with MPI at some point in the lifecycle. Typical aircraft locations inspected are landing gear, engine components, attachment hardware, and doors. In spite of its numerous applications the method remains poorly understood, and there are many aspects of that method which would benefit from in-depth study. This shortcoming is due to the fact that MPI combines the complicated nature of electromagnetics, metallurgical material effects, fluid-particle motion dynamics, and physiological human factors into a single inspection. To promote understanding of the intricate method issues that affect sensitivity, or to assist with the revision of industry specifications and standards, research studies will be prioritized through the guidance of a panel of industry experts, using an approach which has worked successfully in the past to guide fluorescent penetrant inspection (FPI) research efforts.

  2. ANNUAL RADIOACTIVE WASTE TANK INSPECTION PROGRAM 2009

    Energy Technology Data Exchange (ETDEWEB)

    West, B.; Waltz, R.

    2010-06-21

    Aqueous radioactive wastes from Savannah River Site (SRS) separations and vitrification processes are contained in large underground carbon steel tanks. Inspections made during 2009 to evaluate these vessels and other waste handling facilities along with evaluations based on data from previous inspections are the subject of this report. The 2009 inspection program revealed that the structural integrity and waste confinement capability of the Savannah River Site waste tanks were maintained. All inspections scheduled per LWO-LWE-2008-00423, HLW Tank Farm Inspection Plan for 2009, were completed. All Ultrasonic measurements (UT) performed in 2009 met the requirements of C-ESG-00006, In-Service Inspection Program for High Level Waste Tanks, Rev. 1, and WSRC-TR-2002-00061, Rev.4. UT inspections were performed on Tank 29 and the findings are documented in SRNL-STI-2009-00559, Tank Inspection NDE Results for Fiscal Year 2009, Waste Tank 29. Post chemical cleaning UT measurements were made in Tank 6 and the results are documented in SRNL-STI-2009-00560, Tank Inspection NDE Results Tank 6, Including Summary of Waste Removal Support Activities in Tanks 5 and 6. A total of 6669 photographs were made and 1276 visual and video inspections were performed during 2009. Twenty-Two new leaksites were identified in 2009. The locations of these leaksites are documented in C-ESR-G-00003, SRS High Level Waste Tank Leaksite Information, Rev.4. Fifteen leaksites at Tank 5 were documented during tank wall/annulus cleaning activities. Five leaksites at Tank 6 were documented during tank wall/annulus cleaning activities. Two new leaksites were identified at Tank 19 during waste removal activities. Previously documented leaksites were reactivated at Tanks 5 and 12 during waste removal activities. Also, a very small amount of additional leakage from a previously identified leaksite at Tank 14 was observed.

  3. Monitoring well inspection and maintenance plan Y-12 Plant, Oak Ridge, Tennessee (revised)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-09-01

    Inspection and maintenance of groundwater monitoring wells is a primary element of the Oak Ridge Y-12 Plant Groundwater Protection Program (GWPP). This document is the revised groundwater monitoring well inspection and maintenance plan for the U.S. Department of Energy (DOE) Y-12 Plant in Oak Ridge, Tennessee. The plan provides a systematic program for: (1) inspecting the physical condition of monitoring wells at the Y-12 Plant and (2) identifying maintenance needs that will extend the life of each well and ensure that representative groundwater quality samples and hydrologic data are collected from the wells. Original documentation for the Y-12 Plant GWPP monitoring well inspection and maintenance program was provided in HSW, Inc. 1991a. The original revision of the plan specified that only a Monitoring Well Inspection/Maintenance Summary need be updated and reissued each year. Rapid growth of the monitoring well network and changing regulatory requirements have resulted in constant changes to the status of wells (active or inactive) listed on the Monitoring Well Inspection/Maintenance Summary. As a result, a new mechanism to track the status of monitoring wells has been developed and the plan revised to formalize the new business practices. These changes are detailed in Sections 2.4 and 2.5.

  4. Department of Agriculture, Food Safety and Inspection Service

    Science.gov (United States)

    ... Health Information System (PHIS) Inspection Program for Siluriformes Fish Modernization of Poultry Slaughter Inspection Attend a Public Meeting Apply for a Grant of Inspection Find Resources for Small Plants Export or Import Meat, Poultry or Egg Products Report a Problem ...

  5. Semantic Business Intelligence - a New Generation of Business Intelligence

    Directory of Open Access Journals (Sweden)

    Dinu AIRINEI

    2012-01-01

    Full Text Available Business Intelligence Solutions represents applications used by companies to manage process and analyze data to provide substantiated decision. In the context of Semantic Web develop-ment trend is to integrate semantic unstructured data, making business intelligence solutions to be redesigned in such a manner that can analyze, process and synthesize, in addition to traditional data and data integrated with semantic another form and structure. This invariably leads appearance of new BI solution, called Semantic Business Intelligence.

  6. Multiple Intelligences Development of Athletes: Examination on Dominant Intelligences

    OpenAIRE

    Wei-ting; Hsu Hong-shih; Chou Wen-chang; Chen

    2011-01-01

    The study attempted to identify the dominant intelligences of athletes by comparing the developmental differences of multiple intelligences between athletes and non-athletes. The weekly specialized training hours and years of specialized training was examined to see how it can predict the dominant intelligence with the age factor controlled. There were 355 participants in the research (202 athletes and 153 non-athletes). Collected data were analyzed with one-way MANOVA an...

  7. Open Ended Intelligence: The individuation of Intelligent Agents

    OpenAIRE

    Weinbaum, David; Veitas, Viktoras

    2015-01-01

    Artificial General Intelligence is a field of research aiming to distill the principles of intelligence that operate independently of a specific problem domain or a predefined context and utilize these principles in order to synthesize systems capable of performing any intellectual task a human being is capable of and eventually go beyond that. While "narrow" artificial intelligence which focuses on solving specific problems such as speech recognition, text comprehension, visual pattern recog...

  8. Open source intelligence (OSINT): a contemporary intelligence lifeline

    OpenAIRE

    Gibson, S D

    2011-01-01

    Traditionally, intelligence has been distinguished from all other forms of information working by its secrecy.Secret intelligence is about the acquisition of information from entities that do not wish that information to be acquired and,ideally,never know that it has. However, the transformation in information and communication technology(ICT)over the last two decades challenges this conventionally held perception of intelligence in one critical aspect: that information can increasingly be ac...

  9. Multiple Intelligences: Current Trends in Assessment

    Science.gov (United States)

    Harman, Marsha J.; Kordinak, S. Thomas; Bruce, A. Jerry

    2009-01-01

    With his theory of multiple intelligences, Howard Gardner challenged the presumption that intelligence is a single innate entity. He maintained that multiple intelligences exist and are related to specific brain areas and symbol systems. Each of the intelligences has its merits and limits, but by using a multiple intelligences approach, more…

  10. Fostering collective intelligence education

    Directory of Open Access Journals (Sweden)

    Jaime Meza

    2016-06-01

    Full Text Available New educational models are necessary to update learning environments to the digitally shared communication and information. Collective intelligence is an emerging field that already has a significant impact in many areas and will have great implications in education, not only from the side of new methodologies but also as a challenge for education. This paper proposes an approach to a collective intelligence model of teaching using Internet to combine two strategies: idea management and real time assessment in the class. A digital tool named Fabricius has been created supporting these two elements to foster the collaboration and engagement of students in the learning process. As a result of the research we propose a list of KPI trying to measure individual and collective performance. We are conscious that this is just a first approach to define which aspects of a class following a course can be qualified and quantified.

  11. Intelligent Interactive Multimedia

    CERN Document Server

    Watanabe, Toyohide; Takahashi, Naohisa; 5th International Conference on Intelligent Interactive Multimedia Systems and Services

    2012-01-01

    This volume contains the Proceedings of the 5th International Conference on Intelligent Interactive Multimedia Systems and Services (KES-IIMSS-12).  The Conference was jointly organised by Nagoya University in Japan and the KES International organisation, and held in the attractive city of Gifu.   The KES-IIMSS conference series, (series chairs Prof. Maria Virvou and Prof. George Tsihrintzis), presents novel research in various areas of intelligent multimedia system relevant to the development of a new generation of interactive, user-centric devices and systems.  The aim of the conference is to provide an internationally respected forum for scientific research in the technologies and applications of this new and dynamic research area.

  12. Introduction to Physical Intelligence

    Science.gov (United States)

    Zak, Michail

    2011-01-01

    A slight deviation from Newtonian dynamics can lead to new effects associated with the concept of physical intelligence. Non-Newtonian effects such as deviation from classical thermodynamic as well as quantum-like properties have been analyzed. A self-supervised (intelligent) particle that can escape from Brownian motion autonomously is introduced. Such a capability is due to a coupling of the particle governing equation with its own Liouville equation via an appropriate feedback. As a result, the governing equation is self-stabilized, and random oscillations are suppressed, while the Liouville equation takes the form of the Fokker-Planck equation with negative diffusion. Non- Newtonian properties of such a dynamical system as well as thermodynamical implications have been evaluated.

  13. Intelligent Sensors Security

    Directory of Open Access Journals (Sweden)

    Andrzej Bialas

    2010-01-01

    Full Text Available The paper is focused on the security issues of sensors provided with processors and software and used for high-risk applications. Common IT related threats may cause serious consequences for sensor system users. To improve their robustness, sensor systems should be developed in a restricted way that would provide them with assurance. One assurance creation methodology is Common Criteria (ISO/IEC 15408 used for IT products and systems. The paper begins with a primer on the Common Criteria, and then a general security model of the intelligent sensor as an IT product is discussed. The paper presents how the security problem of the intelligent sensor is defined and solved. The contribution of the paper is to provide Common Criteria (CC related security design patterns and to improve the effectiveness of the sensor development process.

  14. Intelligent audio analysis

    CERN Document Server

    Schuller, Björn W

    2013-01-01

    This book provides the reader with the knowledge necessary for comprehension of the field of Intelligent Audio Analysis. It firstly introduces standard methods and discusses the typical Intelligent Audio Analysis chain going from audio data to audio features to audio recognition.  Further, an introduction to audio source separation, and enhancement and robustness are given. After the introductory parts, the book shows several applications for the three types of audio: speech, music, and general sound. Each task is shortly introduced, followed by a description of the specific data and methods applied, experiments and results, and a conclusion for this specific task. The books provides benchmark results and standardized test-beds for a broader range of audio analysis tasks. The main focus thereby lies on the parallel advancement of realism in audio analysis, as too often today’s results are overly optimistic owing to idealized testing conditions, and it serves to stimulate synergies arising from transfer of ...

  15. Intelligence in children

    Directory of Open Access Journals (Sweden)

    Martín Nader

    2015-09-01

    Full Text Available Partial results of an investigation are presented whose primary objective is to adapt and to standardize the neurocognitive assessment battery C.A.S. of Das and Naglieri (1997 in a child sample. The test is an operationalization of a non traditional intelligence model (PASS that considers the intelligent behaviors as a group of four cognitive basic processes (planning, attention, simultaneous and successive processing. The objectives of this work are to obtain the psychometric properties of the instrument and also, to analyze if differences exist according to sex and age. The study type is crosswise - transactional. It was administered the CAS to 150 children residents in Buenos Aires among the ages of 6 to 12 years (population general non consultant and the WISC-III to a sample of 50 children. 

  16. Intelligent Flow Control Valve

    Science.gov (United States)

    Kelley, Anthony R (Inventor)

    2015-01-01

    The present invention is an intelligent flow control valve which may be inserted into the flow coming out of a pipe and activated to provide a method to stop, measure, and meter flow coming from the open or possibly broken pipe. The intelligent flow control valve may be used to stop the flow while repairs are made. Once repairs have been made, the valve may be removed or used as a control valve to meter the amount of flow from inside the pipe. With the addition of instrumentation, the valve may also be used as a variable area flow meter and flow controller programmed based upon flowing conditions. With robotic additions, the valve may be configured to crawl into a desired pipe location, anchor itself, and activate flow control or metering remotely.

  17. Intelligent Sensors Security

    Science.gov (United States)

    Bialas, Andrzej

    2010-01-01

    The paper is focused on the security issues of sensors provided with processors and software and used for high-risk applications. Common IT related threats may cause serious consequences for sensor system users. To improve their robustness, sensor systems should be developed in a restricted way that would provide them with assurance. One assurance creation methodology is Common Criteria (ISO/IEC 15408) used for IT products and systems. The paper begins with a primer on the Common Criteria, and then a general security model of the intelligent sensor as an IT product is discussed. The paper presents how the security problem of the intelligent sensor is defined and solved. The contribution of the paper is to provide Common Criteria (CC) related security design patterns and to improve the effectiveness of the sensor development process. PMID:22315571

  18. Binary Masking & Speech Intelligibility

    DEFF Research Database (Denmark)

    Boldt, Jesper

    experiments under ideal conditions or as experiments under more realistic conditions useful for real-life applications such as hearing aids. In the experiments under ideal conditions, the previously defined ideal binary mask is evaluated using hearing impaired listeners, and a novel binary mask -- the target...... binary mask -- is introduced. The target binary mask shows the same substantial increase in intelligibility as the ideal binary mask and is proposed as a new reference for binary masking. In the category of real-life applications, two new methods are proposed: a method for estimation of the ideal binary...... mask using a directional system and a method for correcting errors in the target binary mask. The last part of the thesis, proposes a new method for objective evaluation of speech intelligibility....

  19. Psychology of Intelligence Analysis

    Science.gov (United States)

    1999-01-01

    intelligent, exceptionally hard-working, and skilled in the bureaucratic arts , Gates was appointed DDI by DCI William Casey in good part because he...practice, psychoanalysts are required to undergo psychoanalysis themselves in order to become more aware of how their own personality interacts with...and conditions their observa- tions of others. The practice of psychoanalysis has not been so success- ful that its procedures should be emulated by

  20. Supporting shop floor intelligence

    DEFF Research Database (Denmark)

    Carstensen, Peter; Schmidt, Kjeld; Wiil, Uffe Kock

    1999-01-01

    Many manufacturing enterprises are now trying to introduce various forms of flexible work organizations on the shop floor. However, existing computer-based production planning and control systems pose severe obstacles for autonomous working groups and other kinds of shop floor control to become r......-to-day production planning by supporting intelligent and responsible workers in their situated coordination activities on the shop floor....

  1. MUTUALISATION & INTELLIGENCE TERRITORIALE

    OpenAIRE

    Herbaux, Philippe; Bertacchini, Yann

    2003-01-01

    the making of an integrated device of competitive intelligence by is often complex for its promoters. Methodologies of project used in these mechanisms, "run up" the internal diagram of culture to the company and sometimes place it, according to Pateyron (1994) in "complex situation of uncertainty". The observation of a local GPS (strategic task force) with SME undertakings of an identified territory, enables us to note a lever effect in the progressive appropriation by its members, of logics...

  2. Essentials of artificial intelligence

    CERN Document Server

    Ginsberg, Matt

    1993-01-01

    Since its publication, Essentials of Artificial Intelligence has beenadopted at numerous universities and colleges offering introductory AIcourses at the graduate and undergraduate levels. Based on the author'scourse at Stanford University, the book is an integrated, cohesiveintroduction to the field. The author has a fresh, entertaining writingstyle that combines clear presentations with humor and AI anecdotes. At thesame time, as an active AI researcher, he presents the materialauthoritatively and with insight that reflects a contemporary, first hand

  3. An Intelligent Robot Programing

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Seong Yong

    2012-01-15

    This book introduces an intelligent robot programing with background of the begging, introduction of VPL, and SPL, building of environment for robot platform, starting of robot programing, design of simulation environment, robot autonomy drive control programing, simulation graphic. Such as SPL graphic programing graphical image and graphical shapes, and graphical method application, application of procedure for robot control, robot multiprogramming, robot bumper sensor programing, robot LRF sencor programing and robot color sensor programing.

  4. Intelligent PID controllers

    OpenAIRE

    Fliess, Michel; Join, Cédric

    2008-01-01

    International audience; Intelligent PID controllers, or i-PID controllers, are PID controllers where the unknown parts of the plant, which might be highly nonlinear and/or time-varying, are taken into account without any modeling procedure. Our main tool is an online numerical differentiator, which is based on easily implementable fast estimation and identification techniques. Several numerical experiments demonstrate the efficiency of our method when compared to more classic PID regulators.

  5. Cyber Intelligence Analysis Platform

    Science.gov (United States)

    2014-04-01

    Montréal (Québec) H3T 1J4 Contractor’s Document Number: CSSP -2012-TI-1033 Contract Number: 7182702 CSA: Rodney Howes, Portfolio Manager and CoP...of Canada. Contract Report DRDC-RDDC-2014-C108 April 2014 IMPORTANT INFORMATIVE STATEMENTS CSSP -2012-TI-1033 Cyber...Intelligence Analysis Sandbox was supported by the Canadian Safety and Security Program ( CSSP ) which is led by Defence Research and Development

  6. Mobile Intelligent Autonomous Systems

    OpenAIRE

    Jitendra R. Raol; Ajith Gopal

    2010-01-01

    Mobile intelligent autonomous systems (MIAS) is a fast emerging research area. Although it can be regarded as a general R&D area, it is mainly directed towards robotics. Several important subtopics within MIAS research are:(i) perception and reasoning, (ii) mobility and navigation,(iii) haptics and teleoperation, (iv) image fusion/computervision, (v) modelling of manipulators, (vi) hardware/software architectures for planning and behaviour learning leadingto robotic architecture, (vii) ve...

  7. Intelligent Garbage Classifier

    Directory of Open Access Journals (Sweden)

    Ignacio Rodríguez Novelle

    2008-12-01

    Full Text Available IGC (Intelligent Garbage Classifier is a system for visual classification and separation of solid waste products. Currently, an important part of the separation effort is based on manual work, from household separation to industrial waste management. Taking advantage of the technologies currently available, a system has been built that can analyze images from a camera and control a robot arm and conveyor belt to automatically separate different kinds of waste.

  8. Binary Masking & Speech Intelligibility

    OpenAIRE

    Boldt, Jesper

    2010-01-01

    The purpose of this thesis is to examine how binary masking can be used to increase intelligibility in situations where hearing impaired listeners have difficulties understanding what is being said. The major part of the experiments carried out in this thesis can be categorized as either experiments under ideal conditions or as experiments under more realistic conditions useful for real-life applications such as hearing aids. In the experiments under ideal conditions, the previously defined i...

  9. Whither Intelligence Research?

    Directory of Open Access Journals (Sweden)

    Wendy Johnson

    2013-10-01

    Full Text Available Today we have many exciting new technological tools that allow us to observe the brain and genome and lure us into new kinds of studies. I believe, however, that we will not be able to make truly effective use of these tools until we understand better what it is we mean to measure when we measure intelligence, how it develops, and the impact of the clear presence of gene-environment correlation on its development.

  10. Artificial intelligence in medicine.

    Science.gov (United States)

    Hamet, Pavel; Tremblay, Johanne

    2017-04-01

    Artificial Intelligence (AI) is a general term that implies the use of a computer to model intelligent behavior with minimal human intervention. AI is generally accepted as having started with the invention of robots. The term derives from the Czech word robota, meaning biosynthetic machines used as forced labor. In this field, Leonardo Da Vinci's lasting heritage is today's burgeoning use of robotic-assisted surgery, named after him, for complex urologic and gynecologic procedures. Da Vinci's sketchbooks of robots helped set the stage for this innovation. AI, described as the science and engineering of making intelligent machines, was officially born in 1956. The term is applicable to a broad range of items in medicine such as robotics, medical diagnosis, medical statistics, and human biology-up to and including today's "omics". AI in medicine, which is the focus of this review, has two main branches: virtual and physical. The virtual branch includes informatics approaches from deep learning information management to control of health management systems, including electronic health records, and active guidance of physicians in their treatment decisions. The physical branch is best represented by robots used to assist the elderly patient or the attending surgeon. Also embodied in this branch are targeted nanorobots, a unique new drug delivery system. The societal and ethical complexities of these applications require further reflection, proof of their medical utility, economic value, and development of interdisciplinary strategies for their wider application. Copyright © 2017. Published by Elsevier Inc.

  11. Decision-Making Amplification under Uncertainty: An Exploratory Study of Behavioral Similarity and Intelligent Decision Support Systems

    Science.gov (United States)

    Campbell, Merle Wayne

    2013-01-01

    Intelligent decision systems have the potential to support and greatly amplify human decision-making across a number of industries and domains. However, despite the rapid improvement in the underlying capabilities of these "intelligent" systems, increasing their acceptance as decision aids in industry has remained a formidable challenge.…

  12. Modular dry-coupled ultrasonic probes for field inspections of multilayered aircraft structures

    Science.gov (United States)

    Komsky, Igor N.

    2005-05-01

    Most of the multi-layered aircraft structures including composite structures are still inspected primarily through various visual methods that require removal of multiple structural components to detect flaws in the internal layers of the structure. Some aircraft operators utilize for the multi-layered inspections more advanced NDI techniques such as X-ray. However, application of the X-ray technique still requires access to the bottom layers of the multi-layered structures for proper positioning of films or digital sensors. Additional time is also needed to comply with the safety rules for the X-ray inspection procedures. Hence, current inspection procedures for the multi-layered aircraft structures are fairly cumbersome, time-consuming and costly. Application of the dry-coupled ultrasonic modules makes it possible to detect and characterize defects in the internal layers from outside aircraft skin without disassembly. The inspection technique is easy to use, and, at the same time, is sensitive enough to identify critical structural degradation caused by the defects. The dry-coupled inspection technique is also sufficiently rapid so that aircraft downtime is minimized. The modules are also suitable for concurrent flaw detection and sealant quality monitoring in the multi-layer aircraft structures. The concept of the dry-coupled transducer modules has already been tested on the DC-10 horizontal stabilizer (crack detection around fasteners). Several current inspection procedures for aircraft multi-layered composite structures were reviewed to identify the areas for effective implementation of the dry-coupled ultrasonic techniques. Ultrasonic inspection techniques are being developed including flaw detection and characterization protocols for internal defects in various layers of the multi-layered structures. Modular dry-coupled ultrasonic transducers with exchangeable elements and digital encoding systems are being modified for applications on the multi

  13. Evolutionary psychology and intelligence research.

    Science.gov (United States)

    Kanazawa, Satoshi

    2010-01-01

    This article seeks to unify two subfields of psychology that have hitherto stood separately: evolutionary psychology and intelligence research/differential psychology. I suggest that general intelligence may simultaneously be an evolved adaptation and an individual-difference variable. Tooby and Cosmides's (1990a) notion of random quantitative variation on a monomorphic design allows us to incorporate heritable individual differences in evolved adaptations. The Savanna-IQ Interaction Hypothesis, which is one consequence of the integration of evolutionary psychology and intelligence research, can potentially explain why less intelligent individuals enjoy TV more, why liberals are more intelligent than conservatives, and why night owls are more intelligent than morning larks, among many other findings. The general approach proposed here will allow us to integrate evolutionary psychology with any other aspect of differential psychology. Copyright 2010 APA, all rights reserved.

  14. Soft computing in artificial intelligence

    CERN Document Server

    Matson, Eric

    2014-01-01

    This book explores the concept of artificial intelligence based on knowledge-based algorithms. Given the current hardware and software technologies and artificial intelligence theories, we can think of how efficient to provide a solution, how best to implement a model and how successful to achieve it. This edition provides readers with the most recent progress and novel solutions in artificial intelligence. This book aims at presenting the research results and solutions of applications in relevance with artificial intelligence technologies. We propose to researchers and practitioners some methods to advance the intelligent systems and apply artificial intelligence to specific or general purpose. This book consists of 13 contributions that feature fuzzy (r, s)-minimal pre- and β-open sets, handling big coocurrence matrices, Xie-Beni-type fuzzy cluster validation, fuzzy c-regression models, combination of genetic algorithm and ant colony optimization, building expert system, fuzzy logic and neural network, ind...

  15. An Articulated Inspection Arm for fusion purposes

    Energy Technology Data Exchange (ETDEWEB)

    Villedieu, E., E-mail: eric.villedieu@cea.fr [CEA-IRFM, 13108 Saint Paul lez Durance (France); Bruno, V.; Pastor, P.; Gargiulo, L. [CEA-IRFM, 13108 Saint Paul lez Durance (France); Song, Y.T.; Cheng, Y.; Feng, H. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Liu, C. [CEA-IRFM, 13108 Saint Paul lez Durance (France); Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China); Shi, S.S. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei (China)

    2016-11-01

    Highlights: • Requirements for in vacuum tokamak inspection are presented. • Development of a prototype of the Articulated Inspection Arm is described. • The upgrade of the prototype to convert it into a fully operational device is detailed. • Future applications of inspection robots in the new fusion reactors is discussed. - Abstract: Fusion Tokamaks are complex machines which require special conditions for their operation, in particular, high vacuum inside the vessel and high temperature of the vessel walls. During plasma phases, the first wall components are highly stressed and a control is necessary in case of doubt about their condition. To be able to make safely such an inspection in a short period of time is a great advantage. The Articulated Inspection Arm (AIA) developed by the CEA provides the capability for fast inspections of the first wall overall surface keeping the vacuum and temperature conditions of the vessel. The robot prototype was validated in Tore Supra in 2008. In the frame of a joint laboratory, CEA/IRFM and ASIPP have decided to upgrade the existing AIA prototype to use it routinely in the EAST and WEST tokamaks. The robot has followed an important upgrade program in 2013 and 2014. The document presents the various upgrades made on the mechanics, the sensors, the electronics, the control station and the integration adaptation for the operation on EAST. From the AIA experience, thoughts for future inspection robots are given.

  16. UF{sub 6} cylinder inspections at PGDP

    Energy Technology Data Exchange (ETDEWEB)

    Lamb, G.W.; Whinnery, W.N. [Martin Marietta Energy Systems, Inc., Paducah, KY (United States)

    1991-12-31

    Routine inspections of all UF{sub 6} cylinders at the Paducah Gaseous Diffusion Plant have been mandated by the Department of Energy. A specific UF{sub 6} cylinder inspection procedure for what items to inspect and training for the operators prior to inspection duty are described. The layout of the cylinder yards and the forms used in the inspections are shown. The large number of cylinders (>30,000) to inspect and the schedule for completion on the mandated time table are discussed. Results of the inspections and the actions to correct the deficiencies are explained. Future inspections and movement of cylinders for relocation of certain cylinder yards are defined.

  17. ANNUAL RADIOACTIVE WASTE TANK INSPECTION PROGRAM 2010

    Energy Technology Data Exchange (ETDEWEB)

    West, B.; Waltz, R.

    2011-06-23

    Aqueous radioactive wastes from Savannah River Site (SRS) separations and vitrification processes are contained in large underground carbon steel tanks. Inspections made during 2010 to evaluate these vessels and other waste handling facilities along with evaluations based on data from previous inspections are the subject of this report. The 2010 inspection program revealed that the structural integrity and waste confinement capability of the Savannah River Site waste tanks were maintained. All inspections scheduled per SRR-LWE-2009-00138, HLW Tank Farm Inspection Plan for 2010, were completed. Ultrasonic measurements (UT) performed in 2010 met the requirements of C-ESG-00006, In-Service Inspection Program for High Level Waste Tanks, Rev. 3, and WSRC-TR-2002-00061, Rev.6. UT inspections were performed on Tanks 30, 31 and 32 and the findings are documented in SRNL-STI-2010-00533, Tank Inspection NDE Results for Fiscal Year 2010, Waste Tanks 30, 31 and 32. A total of 5824 photographs were made and 1087 visual and video inspections were performed during 2010. Ten new leaksites at Tank 5 were identified in 2010. The locations of these leaksites are documented in C-ESR-G-00003, SRS High Level Waste Tank Leaksite Information, Rev.5. Ten leaksites at Tank 5 were documented during tank wall/annulus cleaning activities. None of these new leaksites resulted in a release to the environment. The leaksites were documented during wall cleaning activities and the waste nodules associated with the leaksites were washed away. Previously documented leaksites were reactivated at Tank 12 during waste removal activities.

  18. Decision support, analytics, and business intelligence

    CERN Document Server

    Power, Daniel J

    2013-01-01

    Competition is becoming more intense and decision makers are encountering increasing complexity, rapid change, and higher levels of risk. In many situations, the solution is more and better computerized decision support, especially analytics and business intelligence. Today managers need to learn about and understand computerized decision support. If a business is to succeed, managers must know much more about information technology solutions. This second edition of a powerful introductory book is targeted at busy managers and MBA students who need to grasp the basics of computerized decision support, including the following: What are analytics? What is a decision support system? How can managers identify opportunities to create innovative computerized support? Inside, the author addresses these questions and some 60 more fundamental questions that are key to understanding the rapidly changing realm of computerized decision support. In a short period of time, you'll "get up to speed" on decision support, anal...

  19. Simplified Universal Intelligent PID Controller

    OpenAIRE

    Mohamed I. Abu El- Sebah

    2016-01-01

    Many researches give a great attention to invent different techniques for process controller application. All of them tend to simplify the controller design algorithm and make it more intelligent, but the two goals seem to be an opposite goals. Although the artificial intelligent controller is proper, they need sometimes a complicated algorithm and parameter adaptation process. This paper presents a new idea to simplify the process controller, also to make it an intellige...

  20. Pearl Harbor: Failure of Intelligence?

    Science.gov (United States)

    1997-04-01

    intelligence, but stemmed from flawed command relationships and inadequate leadership . Notes 1 United States Senate and House of Representatives...into World War I created a need for extensive intelligence data by a sometimes reluctant leadership . Despite President Woodrow Wilson’s policy of...staff meetings, and appointed an officer without an intelligence background (Lt Col Kendall J. Fielder ) as his G2. The basis for the appointment was

  1. The Professionalization of Intelligence Cooperation

    DEFF Research Database (Denmark)

    Svendsen, Adam David Morgan

    "Providing an in-depth insight into the subject of intelligence cooperation (officially known as liason), this book explores the complexities of this process. Towards facilitating a general understanding of the professionalization of intelligence cooperation, Svendsen's analysis includes risk...... management and encourages the realisation of greater resilience. Svendsen discusses the controversial, mixed and uneven characterisations of the process of the professionalization of intelligence cooperation and argues for a degree of 'fashioning method out of mayhem' through greater operational...

  2. 2015 Chinese Intelligent Automation Conference

    CERN Document Server

    Li, Hongbo

    2015-01-01

    Proceedings of the 2015 Chinese Intelligent Automation Conference presents selected research papers from the CIAC’15, held in Fuzhou, China. The topics include adaptive control, fuzzy control, neural network based control, knowledge based control, hybrid intelligent control, learning control, evolutionary mechanism based control, multi-sensor integration, failure diagnosis, reconfigurable control, etc. Engineers and researchers from academia, industry and the government can gain valuable insights into interdisciplinary solutions in the field of intelligent automation.

  3. Does leadership need emotional intelligence?

    OpenAIRE

    Antonakis, J.; Ashkanasy, N. M.; Dasborough, M.

    2009-01-01

    Interest in emotional intelligence has bloomed over the last few years. That it has become a standard concept in general and applied psychology, as well as in applied business settings, is indubitable. Is this popularity warranted? Casting a shadow over the concept of emotional intelligence are concerns about its meaningfulness and the construct and predictive validity of its various measures. The following series of letters explores various issues surrounding emotional intelligence and leade...

  4. Springer handbook of computational intelligence

    CERN Document Server

    Pedrycz, Witold

    2015-01-01

    This is the first book covering the basics and the state of the art and important applications of the complete growing discipline of computational intelligence. This comprehensive handbook presents a unique synergy of various approaches and new qualities to be gained by using hybrid approaches, incl. inspirations from biology and living organisms and animate systems. The text is organized in 7 main parts foundations, fuzzy sets, rough sets, evolutionary computation, neural networks, swarm intelligence and hybrid computational intelligence systems.

  5. The handbook of artificial intelligence

    CERN Document Server

    Barr, Avron

    1982-01-01

    The Handbook of Artificial Intelligence, Volume II focuses on the improvements in artificial intelligence (AI) and its increasing applications, including programming languages, intelligent CAI systems, and the employment of AI in medicine, science, and education. The book first elaborates on programming languages for AI research and applications-oriented AI research. Discussions cover scientific applications, teiresias, applications in chemistry, dependencies and assumptions, AI programming-language features, and LISP. The manuscript then examines applications-oriented AI research in medicine

  6. Electronic shearography for bridge inspection

    Science.gov (United States)

    Satpathi, Debashis; Maji, Arup K.

    1995-04-01

    Electronic shearography (ES) is a laser based non-destructive testing method that has the potential to be developed into a commercial bridge monitoring technique. The primary advantage of ES over other similar techniques like electronic speckle pattern interferometry (ESPI) is its decreased sensitivity to in-plane rigid body movement and vibrations. Bridge inspection with ES has proven to be a daunting task so far. The main problem has been the inability of the method to handle the large deflections and vibrations that might be expected in a typical bridge subjected to normal service loads. Earlier research has shown that the extent of in-plane movement that can be tolerated by the system is dependent on the speckle size. The speckle size also affects the fringe quality by imposing resolution requirements on the imaging device. This article shall undertake the study of speckle size as a function of the focal length of the imaging lens, object distance and illumination wavelength using high resolution holographic film and a high magnification optical microscope.

  7. Autonomous Robotic Inspection in Tunnels

    Science.gov (United States)

    Protopapadakis, E.; Stentoumis, C.; Doulamis, N.; Doulamis, A.; Loupos, K.; Makantasis, K.; Kopsiaftis, G.; Amditis, A.

    2016-06-01

    In this paper, an automatic robotic inspector for tunnel assessment is presented. The proposed platform is able to autonomously navigate within the civil infrastructures, grab stereo images and process/analyse them, in order to identify defect types. At first, there is the crack detection via deep learning approaches. Then, a detailed 3D model of the cracked area is created, utilizing photogrammetric methods. Finally, a laser profiling of the tunnel's lining, for a narrow region close to detected crack is performed; allowing for the deduction of potential deformations. The robotic platform consists of an autonomous mobile vehicle; a crane arm, guided by the computer vision-based crack detector, carrying ultrasound sensors, the stereo cameras and the laser scanner. Visual inspection is based on convolutional neural networks, which support the creation of high-level discriminative features for complex non-linear pattern classification. Then, real-time 3D information is accurately calculated and the crack position and orientation is passed to the robotic platform. The entire system has been evaluated in railway and road tunnels, i.e. in Egnatia Highway and London underground infrastructure.

  8. Flexible ultrasonic pipe inspection apparatus

    Science.gov (United States)

    Jenkins, C.F.; Howard, B.D.

    1998-06-23

    A flexible, modular ultrasonic pipe inspection apparatus, comprises a flexible, hollow shaft that carries a plurality of modules, including at least one rotatable ultrasonic transducer, a motor/gear unit, and a position/signal encoder. The modules are connected by flexible knuckle joints that allow each module of the apparatus to change its relative orientation with respect to a neighboring module, while the shaft protects electrical wiring from kinking or buckling while the apparatus moves around a tight corner. The apparatus is moved through a pipe by any suitable means, including a tether or drawstring attached to the nose or tail, differential hydraulic pressure, or a pipe pig. The rotational speed of the ultrasonic transducer and the forward velocity of the apparatus are coordinated so that the beam sweeps out the entire interior surface of the pipe, enabling the operator to accurately assess the condition of the pipe wall and determine whether or not leak-prone corrosion damage is present. 7 figs.

  9. Hanford site post NPH building inspection plan

    Energy Technology Data Exchange (ETDEWEB)

    Wagenblast, G.R., Westinghouse Hanford

    1996-09-12

    This plan establishes consistent post-NPH building inspection procedures and defines a procedure for prioritization of buildings for inspection to ensure the safety of facilities prior to reentry. Qualification of systems for restart of operation is not included. This plan takes advantage, where possible, of existing national procedures for post-NPH inspection of buildings, of existing structural design and evaluation documentation of Hanford facilities, and current and proposed seismic instrumentation located throughout the Hanford site. A list of buildings, prioritized according to current building safety function and building vulnerability (without regard for or information about a damaging natural forces event) is provided.

  10. MRT fuel element inspection at Dounreay

    Energy Technology Data Exchange (ETDEWEB)

    Gibson, J.

    1997-08-01

    To ensure that their production and inspection processes are performed in an acceptable manner, ie. auditable and traceable, the MTR Fuel Element Fabrication Plant at Dounreay operates to a documented quality system. This quality system, together with the fuel element manufacturing and inspection operations, has been independently certified to ISO9002-1987, EN29002-1987 and BS5750:Pt2:1987 by Lloyd`s Register Quality Assurance Limited (LRQA). This certification also provides dual accreditation to the relevant German, Dutch and Australian certification bodies. This paper briefly describes the quality system, together with the various inspection stages involved in the manufacture of MTR fuel elements at Dounreay.

  11. Affective Computing and Intelligent Interaction

    CERN Document Server

    2012-01-01

    2012 International Conference on Affective Computing and Intelligent Interaction (ICACII 2012) was the most comprehensive conference focused on the various aspects of advances in Affective Computing and Intelligent Interaction. The conference provided a rare opportunity to bring together worldwide academic researchers and practitioners for exchanging the latest developments and applications in this field such as Intelligent Computing, Affective Computing, Machine Learning, Business Intelligence and HCI.   This volume is a collection of 119 papers selected from 410 submissions from universities and industries all over the world, based on their quality and relevancy to the conference. All of the papers have been peer-reviewed by selected experts.  

  12. Putting Emotional Intelligence To Work

    CERN Document Server

    Ryback, David

    2012-01-01

    Putting Emotional Intelligence to Work offers a new paradigm of communication for the 21st-century workplace. Beginning with the thoughts of communication pioneer Carl Rogers, this book covers the origins and history of emotional intelligence, why it is essential at this point in the changing marketplace, how to delegate and negotiate more effectively, and how to change yourself to become a more effective player. An EQ (Emotional Quotient) survey helps you determine where you are on the scale of executive intelligence. Putting Emotional Intelligence to Work leaves you with a greater understand

  13. Study on Intelligent Stadiums System and Development Trend based on the Internet of Things

    National Research Council Canada - National Science Library

    Tingxuan Wang

    2016-01-01

    ... activities. Keywords: Intelligent stadiums system, Office automation system, RFID recognition, Sports activities 1.Introduction Rapid advance of science and technology, especially the rapid development of modern electronic technology, computer communication and control technology based on microelectronics, which has a history of several thousan...

  14. 14th International Conference on Intelligent Autonomous Systems

    CERN Document Server

    Hosoda, Koh; Menegatti, Emanuele; Shimizu, Masahiro; Wang, Hesheng

    2017-01-01

    This book describes the latest research advances, innovations, and visions in the field of robotics as presented by leading researchers, engineers, and practitioners from around the world at the 14th International Conference on Intelligent Autonomous Systems (IAS-14), held in Shanghai, China in July 2016. The contributions amply demonstrate that robots, machines and systems are rapidly achieving intelligence and autonomy, attaining more and more capabilities such as mobility and manipulation, sensing and perception, reasoning, and decision-making. They cover a wide range of research results and applications, and particular attention is paid to the emerging role of autonomous robots and intelligent systems in industrial production, which reflects their maturity and robustness. The contributions were selected by means of a rigorous peer-review process and highlight many exciting and visionary ideas that will further galvanize the research community and spur novel research directions. The series of biennial IAS ...

  15. Mobile Mapping,Geographic Information Update and Urban Management Intelligence

    Directory of Open Access Journals (Sweden)

    LU Xiushan

    2017-10-01

    Full Text Available The foundation of urban management intelligence is internet,geographic information platform and cloud computing platform.Data updating is the soul of geographic information platform.The rapid updating of urban geographic information involves concepts,funds and techniques.These three factors constitute the historic challenge of urban surveying and mapping,and also the reality bottleneck of the implementation of urban management intelligence.This paper presents a city natural data model(CNDMthat is based on the color laser point cloud.Based on vehicle borne mobile mapping,unmanned aerial vehicle (UAV aerial photograph,mobile phone taking,HD video surveillance and cloud computing platform,a fast updating system of CNDM is formed.City geographic information platform for city actuality is constructed based on the real-time update of CNDM,which is to establish the base data of urban management intelligence.

  16. NDT applications in a successful fracture critical bridge inspection program and anchor bolt inspection program

    Science.gov (United States)

    Fish, Philip E.

    1995-05-01

    In 1978, Wisconsin Department of Transportation discovered major cracking on a two-girder, fracture critical structure, just four years after it was constructed. In 1981, on the same structure, now seven years old, major cracking was discovered in the tie girder flange of the tied arch span. This is one example of the type of failures that transportation departments discovered on welded structures in the 1970's and '80's. The failures from welded details and pinned connections lead to much stricter standards for present day designs. All areas were affected: design with identification of fatigue-prone details and classification of fatigue categories; material requirements with emphasis on toughness and weldability; increased welding and fabrication standards with licensure of fabrication shops to minimum quality standards including personnel; and an increased effort on inspection of existing bridges, where critical details were overlooked or missed in the past. FHWA inspection requirements for existing structures increased through this same time period, in reaction to the failures that had occurred. Obviously, many structures in Wisconsin were not built to the standards now required, thus the importance for quality inspection techniques. The new FHWA inspection requirements now being implemented throughout the nation require an in-depth, hands-on type inspection at a specified frequency, on all fracture critical structures. Wisconsin Department of Transportation started an in-depth inspection program in 1985 and made it a full time program in 1987. This program included extensive nondestructive testing. Ultrasonic inspection has played a major role in this type of inspection. All fracture critical structures, pin and hanger systems, and pinned connections are inspected on a five-year cycle now. The program requires an experienced inspection team and a practical inspection approach. Extensive preparation is required with review of all design, construction, and

  17. Multiple intelligences: Can they be measured?

    OpenAIRE

    Kirsi Tirri; Petri Nokelainen; Erkki Komulainen

    2013-01-01

    This paper is about issues relating to the assessment of multiple intelligences. The first section introduces the authors’ work on building measures of multiple intelligences and moral sensitivities. It also provides a conceptual definition of multiple intelligences based on Multiple Intelligences theory by Howard Gardner (1983). The second section discusses the context specificity of intelligences and alternative approaches to measuring multiple intelligences. The third section analyses the ...

  18. Emotional Intelligence vs. General Intelligence: Aspects to Consider in Teaching

    Science.gov (United States)

    Martínez-Rubio, José Luis; Moraleda, Esther; Rodríguez, Blanca; García-Salmones, Lourdes; Primo, Manuel

    2014-01-01

    The main objective of this study was to analyze the way in which emotional competencies (EI) in students are linked to general intelligence (IQ), and how the crossing of the two measurements determines their academic performance. To conduct this research, two tests were applied. First, the TEIQue (Trait Emotional Intelligence Questionnaire)…

  19. Linguistic intelligence and logical intelligence: Which is determinant ...

    African Journals Online (AJOL)

    Nonetheless, linguistic intelligence had a stronger correlation with their reading comprehension performance in both their L1 and L2. The findings of this study and their implications are helpful for EFL instructors and invite further in-depth research that addresses the relationship between intelligence types and EFL learning.

  20. Generative Artificial Intelligence : Philosophy and Theory of Artificial Intelligence

    NARCIS (Netherlands)

    van der Zant, Tijn; Kouw, Matthijs; Schomaker, Lambertus; Mueller, Vincent C.

    2013-01-01

    The closed systems of contemporary Artificial Intelligence do not seem to lead to intelligent machines in the near future. What is needed are open-ended systems with non-linear properties in order to create interesting properties for the scaffolding of an artificial mind. Using post-structuralistic

  1. Scholastic Success: Fluid Intelligence, Personality, and Emotional Intelligence

    Science.gov (United States)

    Downey, Luke A.; Lomas, Justine; Billings, Clare; Hansen, Karen; Stough, Con

    2014-01-01

    The aim of the current study was to examine the role of fluid intelligence, personality traits, and emotional intelligence (EI) in predicting female Year 9 students' grade point average (GPA) and to determine whether any differences in scholastic performance were related to differences in EI or Personality. Two-hundred and forty-three female…

  2. Inspection control and the environmental protection

    Directory of Open Access Journals (Sweden)

    Milkov Dragan L.

    2015-01-01

    Full Text Available Environmental protection is the task of many administrative bodies, but the activity of the environmental inspection is of special importance. According to the Law on Environmental Protection, inspection's tasks in this area belong to the competence of republican bodies, ie. Ministry of Agriculture and Environmental Protection. Autonomous province and local self-government have only delegated competence in this field, under condition that this is explicitly regulated in special laws. Environmental inspection's activity consists in preventive actions, certain prior - preparatory activities and the audit itself. In addition, following the intervention of the Inspector issue of the control may be corrective or repressive. According to the Law on Inspection Control and the Law on Environmental Protection, the inspectors have a number of powers and responsibilities, which enable them to ensure the lawful and proper conduct of individuals and legal entities.

  3. Emerging nondestructive inspection methods for aging aircraft

    Energy Technology Data Exchange (ETDEWEB)

    Beattie, A; Dahlke, L; Gieske, J [and others

    1994-01-01

    This report identifies and describes emerging nondestructive inspection (NDI) methods that can potentially be used to inspect commercial transport and commuter aircraft for structural damage. The nine categories of emerging NDI techniques are: acoustic emission, x-ray computed tomography, backscatter radiation, reverse geometry x-ray, advanced electromagnetics, including magnetooptic imaging and advanced eddy current techniques, coherent optics, advanced ultrasonics, advanced visual, and infrared thermography. The physical principles, generalized performance characteristics, and typical applications associated with each method are described. In addition, aircraft inspection applications are discussed along with the associated technical considerations. Finally, the status of each technique is presented, with a discussion on when it may be available for use in actual aircraft maintenance programs. It should be noted that this is a companion document to DOT/FAA/CT-91/5, Current Nondestructive Inspection Methods for Aging Aircraft.

  4. Construction engineering inspection direct cost survey.

    Science.gov (United States)

    2014-07-01

    The objective of the study was to provide a rationale to Georgia Department of Transportation : (GDOT) for Direct Costs in terms of salary and wages charged by qualified independent : contractors performing Construction Engineering Inspection (CEI) s...

  5. 23 CFR 650.313 - Inspection procedures.

    Science.gov (United States)

    2010-04-01

    ... managers and team leaders, and independent review of inspection reports and computations. (h) Follow-up on... reference, see § 650.317). (b) Provide at least one team leader, who meets the minimum qualifications stated...

  6. Process Specification for Eddy Current Inspection

    Science.gov (United States)

    Koshti, Ajay

    2011-01-01

    This process specification establishes the minimum requirements for eddy current inspection of flat surfaces, fastener holes, threaded fasteners and seamless and welded tubular products made from nonmagnetic alloys such as aluminum and stainless steel.

  7. The Nature of Future Intelligence Organizations

    National Research Council Canada - National Science Library

    Pacher, Leo

    2000-01-01

    ...) to determine causes of recurring problems related to intelligence organizational design. This monograph proposes a traditional, matrix and virtual models as potential intelligence organization structures...

  8. Risk-based school inspections: impact of targeted inspection approaches on Dutch secondary schools

    OpenAIRE

    Ehren, M.; Shackleton, N.

    2016-01-01

    In most countries, publicly funded schools are held accountable to one inspectorate and are judged against agreed national standards. Many inspectorates of education have recently moved towards more proportional risk-based inspection models, targeting high-risk schools for visits, while schools with satisfactory student attainment levels are excluded from inspections. This paper looks into these newer inspection models and aims to enhance our understanding of the potential effectiveness of su...

  9. Automated visual inspection of moving custom parts

    CSIR Research Space (South Africa)

    Davrajh, S

    2008-01-01

    Full Text Available . Sensor Manipulation The mechanical architecture of the NCAIS was based upon the design of the previous AVIS. Consequently, the spatial constraints of the new design had to match the existing platform constraints. The workspace available to the sensor... suited to inspecting custom parts. This paper details the research, design, construction and assembly of a prototype apparatus, which provided a suitable environment in which customized parts were inspected. System integration using the Mechatronic...

  10. Sound practices for consistent human visual inspection.

    Science.gov (United States)

    Melchore, James A

    2011-03-01

    Numerous presentations and articles on manual inspection of pharmaceutical drug products have been released, since the pioneering articles on inspection by Knapp and associates Knapp and Kushner (J Parenter Drug Assoc 34:14, 1980); Knapp and Kushner (Bull Parenter Drug Assoc 34:369, 1980); Knapp and Kushner (J Parenter Sci Technol 35:176, 1981); Knapp and Kushner (J Parenter Sci Technol 37:170, 1983). This original work by Knapp and associates provided the industry with a statistical means of evaluating inspection performance. This methodology enabled measurement of individual inspector performance, performance of the entire inspector pool and provided basic suggestions for the conduct of manual inspection. Since that time, numerous subject matter experts (SMEs) have presented additional valuable information for the conduct of manual inspection Borchert et al. (J Parenter Sci Technol 40:212, 1986); Knapp and Abramson (J Parenter Sci Technol 44:74, 1990); Shabushnig et al. (1994); Knapp (1999); Knapp (2005); Cherris (2005); Budd (2005); Barber and Thomas (2005); Knapp (2005); Melchore (2007); Leversee and Ronald (2007); Melchore (2009); Budd (2007); Borchert et al. (1986); Berdovich (2005); Berdovich (2007); Knapp (2007); Leversee and Shabushing (2009); Budd (2009). Despite this abundance of knowledge, neither government regulations nor the multiple compendia provide more than minimal guidance or agreement for the conduct of manual inspection. One has to search the literature for useful information that has been published by SMEs in the field of Inspection. The purpose of this article is to restate the sound principles proclaimed by SMEs with the hope that they serve as a useful guideline to bring greater consistency to the conduct of manual inspection. © 2010 American Association of Pharmaceutical Scientists

  11. An Intelligent Sensor for the Ultra-High-Frequency Partial Discharge Online Monitoring of Power Transformers

    Directory of Open Access Journals (Sweden)

    Jian Li

    2016-05-01

    Full Text Available Ultra-high-frequency (UHF partial discharge (PD online monitoring is an effective way to inspect potential faults and insulation defects in power transformers. The construction of UHF PD online monitoring system is a challenge because of the high-frequency and wide-frequency band of the UHF PD signal. This paper presents a novel, intelligent sensor for UHF PD online monitoring based on a new method, namely a level scanning method. The intelligent sensor can directly acquire the statistical characteristic quantities and is characterized by low cost, few data to output and transmit, Ethernet functionality, and small size for easy installation. The prototype of an intelligent sensor was made. Actual UHF PD experiments with three typical artificial defect models of power transformers were carried out in a laboratory, and the waveform recording method and intelligent sensor proposed were simultaneously used for UHF PD measurement for comparison. The results show that the proposed intelligent sensor is qualified for the UHF PD online monitoring of power transformers. Additionally, three methods to improve the performance of intelligent sensors were proposed according to the principle of the level scanning method.

  12. Two speed factors of visual recognition independently correlated with fluid intelligence.

    Directory of Open Access Journals (Sweden)

    Ryosuke Tachibana

    Full Text Available Growing evidence indicates a moderate but significant relationship between processing speed in visuo-cognitive tasks and general intelligence. On the other hand, findings from neuroscience proposed that the primate visual system consists of two major pathways, the ventral pathway for objects recognition and the dorsal pathway for spatial processing and attentive analysis. Previous studies seeking for visuo-cognitive factors of human intelligence indicated a significant correlation between fluid intelligence and the inspection time (IT, an index for a speed of object recognition performed in the ventral pathway. We thus presently examined a possibility that neural processing speed in the dorsal pathway also represented a factor of intelligence. Specifically, we used the mental rotation (MR task, a popular psychometric measure for mental speed of spatial processing in the dorsal pathway. We found that the speed of MR was significantly correlated with intelligence scores, while it had no correlation with one's IT (recognition speed of visual objects. Our results support the new possibility that intelligence could be explained by two types of mental speed, one related to object recognition (IT and another for manipulation of mental images (MR.

  13. ANNUAL RADIOACTIVE WASTE TANK INSPECTION PROGRAM- 2007

    Energy Technology Data Exchange (ETDEWEB)

    West, B; Ruel Waltz, R

    2008-06-05

    Aqueous radioactive wastes from Savannah River Site (SRS) separations and vitrification processes are contained in large underground carbon steel tanks. The 2007 inspection program revealed that the structural integrity and waste confinement capability of the Savannah River Site waste tanks were maintained. A very small amount of material had seeped from Tank 12 from a previously identified leaksite. The material observed had dried on the tank wall and did not reach the annulus floor. A total of 5945 photographs were made and 1221 visual and video inspections were performed during 2007. Additionally, ultrasonic testing was performed on four Waste Tanks (15, 36, 37 and 38) in accordance with approved inspection plans that met the requirements of WSRC-TR-2002- 00061, Revision 2 'In-Service Inspection Program for High Level Waste Tanks'. The Ultrasonic Testing (UT) In-Service Inspections (ISI) are documented in a separate report that is prepared by the ISI programmatic Level III UT Analyst. Tanks 15, 36, 37 and 38 are documented in 'Tank Inspection NDE Results for Fiscal Year 2007'; WSRC-TR-2007-00064.

  14. Camber Angle Inspection for Vehicle Wheel Alignments

    Directory of Open Access Journals (Sweden)

    Jieh-Shian Young

    2017-02-01

    Full Text Available This paper introduces an alternative approach to the camber angle measurement for vehicle wheel alignment. Instead of current commercial approaches that apply computation vision techniques, this study aims at realizing a micro-control-unit (MCU-based camber inspection system with a 3-axis accelerometer. We analyze the precision of the inspection system for the axis misalignments of the accelerometer. The results show that the axes of the accelerometer can be aligned to the axes of the camber inspection system imperfectly. The calibrations that can amend these axis misalignments between the camber inspection system and the accelerometer are also originally proposed since misalignments will usually happen in fabrications of the inspection systems. During camber angle measurements, the x-axis or z-axis of the camber inspection system and the wheel need not be perfectly aligned in the proposed approach. We accomplished two typical authentic camber angle measurements. The results show that the proposed approach is applicable with a precision of ± 0.015 ∘ and therefore facilitates the camber measurement process without downgrading the precision by employing an appropriate 3-axis accelerometer. In addition, the measured results of camber angles can be transmitted via the medium such as RS232, Bluetooth, and Wi-Fi.

  15. Design of workcards for aircraft inspection.

    Science.gov (United States)

    Patel, S; Drury, C G; Lofgren, J

    1994-10-01

    The workcard is the primary document that controls an aircraft inspection task and serves as a major factor influencing inspection performance. The present study develops a methodology for design of workcards, based on the application of human factors knowledge to the analysis of aircraft inspection tasks. A taxonomy for design of usable documentation was developed using four basic categories: information readability, information context, information organization, and physical handling/environmental factors. Within the framework of this taxonomy two extreme representative conditions of aircraft inspection tasks, the A-check and the C-check, were analysed for usability. Issues for workcard redesign were identified within the taxonomy using data from user responses. These were then used to develop alternative design solutions offering improved usability. The increase in usability was measured using inspections of DC-9 aircraft, and proved significant. Not only does this study propose specific design solutions, it also provides a generic methodology that can be followed for design of quality documentation for other aircraft inspection tasks. This methodology is currently being extended for the design of usable information for automated workcards and hypermedia-based documentation.

  16. Strategies to reduce PWR inspection time

    Energy Technology Data Exchange (ETDEWEB)

    Guerra, J.; Gonzalez, E. [TECNATOM SA, Madrid (Spain)

    2001-07-01

    During last few years, a constant reduction in inspection time was clearly demanded by most nuclear plant owners. This requirement has to be accomplished without any impact in inspection quality that, in general, has also to be improved. All this in a market with increasing competition that forces price reductions. Under these new demands from our customers, Tecnatom reoriented its development efforts to improve his products and services to meet this challenges. Two of our main inspection activities that have clear impact in outage duration are Steam Generator and Vessel inspections. This paper describes the improvements made in these two activities as an example of the reorientation of our development efforts with a focus on the technical improvements made on the software and robotic tools applied as in the data acquisition and analysis systems. In the Steam Generator inspections, new robots with dual guide tubes are commonly used. New eddy current instruments and software were developed to keep up with the data rates produced by the faster acquisition system. Use of automatic analysis software is also helping to improve speed while reducing cost and improving overall job quality. Production rates are close to double from the previous inspection system. (author)

  17. Intelligent Electricity Broker

    DEFF Research Database (Denmark)

    Grode, Jesper Nicolai Riis; Væggemose, Poul Erik; Kulik, Tomas

    when feasible to the system owner. This paper describes how the IEB can be used by house owners, in building clusters, and/or by energy providers to take advantage of electricity stock market prices and weather forecasts to control energy surplus storage suffers as well as to lower electricity bills......The Intelligent Electricity Broker (IEB) is a new energy storage and energy broker facility that serves two purposes. Firstly, it allows for storing excessive energy in the Smart Grid [1, 2, 3] it is connected to. Secondly, it runs a broker-algorithm that ensures that energy is purchased and sold...

  18. Uncertainty in artificial intelligence

    CERN Document Server

    Levitt, TS; Lemmer, JF; Shachter, RD

    1990-01-01

    Clearly illustrated in this volume is the current relationship between Uncertainty and AI.It has been said that research in AI revolves around five basic questions asked relative to some particular domain: What knowledge is required? How can this knowledge be acquired? How can it be represented in a system? How should this knowledge be manipulated in order to provide intelligent behavior? How can the behavior be explained? In this volume, all of these questions are addressed. From the perspective of the relationship of uncertainty to the basic questions of AI, the book divides naturally i

  19. Uncertainty in artificial intelligence

    CERN Document Server

    Kanal, LN

    1986-01-01

    How to deal with uncertainty is a subject of much controversy in Artificial Intelligence. This volume brings together a wide range of perspectives on uncertainty, many of the contributors being the principal proponents in the controversy.Some of the notable issues which emerge from these papers revolve around an interval-based calculus of uncertainty, the Dempster-Shafer Theory, and probability as the best numeric model for uncertainty. There remain strong dissenting opinions not only about probability but even about the utility of any numeric method in this context.

  20. Life, Intelligence and Multiverse

    CERN Document Server

    Galantai, Zoltan

    2016-01-01

    Hypothetical existence of other universes gives an opportunity not only to extend the scope of physics, but the scope of biology, SETI, and METI as well. Some steps of the development of alien life concept shall be briefly summarized, then the multiverse proposal shall be used as a framework of interpretation to introduce an extended taxonomy of possible or at least imaginable types of life and intelligence based on either different biochemistry or physics. Some consequences shall be presented about SETI and METI in connection with both multiverse hypothesis and anthropic principle.

  1. Business Intelligence overview

    Directory of Open Access Journals (Sweden)

    Dragos AGIU

    2014-12-01

    Full Text Available The need for information has always been present, but what defines the present time is the big amount of data available everywhere and the need to have all the answers we need in a very short time. Because of the agglomeration of markets and the dynamics of economic environment, the ability to collect data and turn it into useful information for decisional process may be the element which makes the difference. Thus, the term of "business intelligence" was first introduced by Gartner Group in the mid of 90's, but it still exists since the 70's, when the reporting systems were static, two dimensional, with no analytical skills.

  2. Gamma signatures of the C-BORD Tagged Neutron Inspection System

    Directory of Open Access Journals (Sweden)

    Sardet A.

    2018-01-01

    Full Text Available In the frame of C-BORD project (H2020 program of the EU, a Rapidly relocatable Tagged Neutron Inspection System (RRTNIS is being developed to non-intrusively detect explosives, chemical threats, and other illicit goods in cargo containers. Material identification is performed through gamma spectroscopy, using twenty NaI detectors and four LaBr3 detectors, to determine the different elements composing the inspected item from their specific gamma signatures induced by fast neutrons. This is performed using an unfolding algorithm to decompose the energy spectrum of a suspect item, selected by X-ray radiography and on which the RRTNIS inspection is focused, on a database of pure element gamma signatures. This paper reports on simulated signatures for the NaI and LaBr3 detectors, constructed using the MCNP6 code. First experimental spectra of a few elements of interest are also presented.

  3. Multiple Intelligences for Differentiated Learning

    Science.gov (United States)

    Williams, R. Bruce

    2007-01-01

    There is an intricate literacy to Gardner's multiple intelligences theory that unlocks key entry points for differentiated learning. Using a well-articulated framework, rich with graphic representations, Williams provides a comprehensive discussion of multiple intelligences. He moves the teacher and students from curiosity, to confidence, to…

  4. Sex, IQ, and emotional intelligence.

    Science.gov (United States)

    Furnham, Adrian

    2009-12-01

    150 young bankers estimated their IQ (Academic/Cognitive Intelligence) and EQ (Emotional Intelligence) before taking an IQ test. Pearson correlations were r = .40 and .41 between IQ test (Wonderlic Personnel Test) scores (M = 32.8) and IQ estimates (M = 27.9) and EQ estimates, respectively. Women's mean self-estimated IQ was significantly lower than men's.

  5. Next generation emotional intelligence (Abstract)

    Science.gov (United States)

    Jim Saveland

    2012-01-01

    Emotional intelligence has been a hot topic in leadership training since Dan Goleman published his book on the subject in 1995. Emotional intelligence competencies are typically focused on recognition and regulation of emotions in one's self and social situations, yielding four categories: self-awareness, self-management, social awareness and relationship...

  6. Analytical design of intelligent machines

    Science.gov (United States)

    Saridis, George N.; Valavanis, Kimon P.

    1987-01-01

    The problem of designing 'intelligent machines' to operate in uncertain environments with minimum supervision or interaction with a human operator is examined. The structure of an 'intelligent machine' is defined to be the structure of a Hierarchically Intelligent Control System, composed of three levels hierarchically ordered according to the principle of 'increasing precision with decreasing intelligence', namely: the organizational level, performing general information processing tasks in association with a long-term memory; the coordination level, dealing with specific information processing tasks with a short-term memory; and the control level, which performs the execution of various tasks through hardware using feedback control methods. The behavior of such a machine may be managed by controls with special considerations and its 'intelligence' is directly related to the derivation of a compatible measure that associates the intelligence of the higher levels with the concept of entropy, which is a sufficient analytic measure that unifies the treatment of all the levels of an 'intelligent machine' as the mathematical problem of finding the right sequence of internal decisions and controls for a system structured in the order of intelligence and inverse order of precision such that it minimizes its total entropy. A case study on the automatic maintenance of a nuclear plant illustrates the proposed approach.

  7. The Intelligent Method of Learning

    Science.gov (United States)

    Moula, Alireza; Mohseni, Simin; Starrin, Bengt; Scherp, Hans Ake; Puddephatt, Antony J.

    2010-01-01

    Early psychologist William James [1842-1910] and philosopher John Dewey [1859-1952] described intelligence as a method which can be learned. That view of education is integrated with knowledge about the brain's executive functions to empower pupils to intelligently organize their learning. This article links the pragmatist philosophy of…

  8. Artificial Intelligence -- Research and Applications.

    Science.gov (United States)

    1976-06-01

    1975 through 11 April 1976 Stanford Research Institute Projects 3805 and 4763 ARIFICIAL INTELLIGENCE -- RESEARCH AND APPLICATIONS Edited by Bertram...of " vision by distinguishing features." Object recognition via distinguishing features is performed by looking only for those features that...August 1974). 11. T. D. Garvey, "Perceptual Strategies for Purposive Vision , Technical Note 127, Artificial Intelligence Center, Stanford Research

  9. Stupid Tutoring Systems, Intelligent Humans

    Science.gov (United States)

    Baker, Ryan S.

    2016-01-01

    The initial vision for intelligent tutoring systems involved powerful, multi-faceted systems that would leverage rich models of students and pedagogies to create complex learning interactions. But the intelligent tutoring systems used at scale today are much simpler. In this article, I present hypotheses on the factors underlying this development,…

  10. The Theory of Multiple Intelligences.

    Science.gov (United States)

    Gardner, Howard

    1987-01-01

    The multiple intelligence theory is based on cultural contexts, biological analysis, developmental theories, and a vertical theory of faculties. Seven intelligences are identified: linguistic, logical mathematical, musical, spatial, bodily kinesthetic, interpersonal, and intrapersonal. The theory's educational implications are described,…

  11. Empowering Students through Multiple Intelligences.

    Science.gov (United States)

    Rubado, Karen

    2002-01-01

    Howard Gardner's theory of multiple intelligences challenges narrow concepts of student talent and ability. This article applies this theory to the challenge of educating students with learning behavior disabilities. Reaching these young people and engaging them in learning can help them understand that intelligence comes in many forms. (Author)

  12. Teaching to the Multiple Intelligences.

    Science.gov (United States)

    Loria, Win

    1999-01-01

    Relates the exploration and incorporation of Howard Gardner's Multiple Intelligences Theory (MI) into classroom practices. States that service-learning projects provide wonderful opportunities to put into practice the various types of intelligences, allowing students to utilize their best learning strategies to access the content area of the…

  13. Multiple Intelligences: Enabling Diverse Learning.

    Science.gov (United States)

    Berger, Eugenia Hepworth; Pollman, Mary Jo

    1996-01-01

    Compares the whole-child approach to early childhood education and Howard Gardner's concept of multiple intelligences. Provides activities and ideas to address each of the seven intelligences, and lists specific suggestions for parent/child experiences, field trip experiences, and constructivist experiences. Stresses individual child potential.…

  14. Computer Intelligence: Unlimited and Untapped.

    Science.gov (United States)

    Staples, Betsy

    1983-01-01

    Herbert Simon (Nobel prize-winning economist/professor) expresses his views on human and artificial intelligence, problem solving, inventing concepts, and the future. Includes comments on expert systems, state of the art in artificial intelligence, robotics, and "Bacon," a computer program that finds scientific laws hidden in raw data.…

  15. Intelligent Tutoring Systems: A Review.

    Science.gov (United States)

    Sleeman, D.

    This paper presents a critical review of computer assisted instruction (CAI); an overview of recent intelligent tutoring systems (ITSs), including current perceived shortcomings; major activities of the field, i.e., analysis of teaching/learning processes, and extending and developing artificial intelligence techniques for use in intelligent…

  16. Emotional Intelligence and School Leadership

    Science.gov (United States)

    Gray, David

    2009-01-01

    Emotional intelligence is the cornerstone of every decision a principal makes; solving problems and making judgments are part of a leader's system of values and beliefs. Mayer and Salovney (1997) described emotionally intelligent leaders as those who are able to perceive and understand emotions and to regulate emotions to foster emotional and…

  17. Social complexity and social intelligence.

    Science.gov (United States)

    Whiten, A

    2000-01-01

    When we talk of the 'nature of intelligence', or any other attribute, we may be referring to its essential structure, or to its place in nature, particularly the function it has evolved to serve. Here I examine both, from the perspective of the evolution of intelligence in primates. Over the last 20 years, the Social (or 'Machiavellian') Intelligence Hypothesis has gained empirical support. Its core claim is that the intelligence of primates is primarily an adaptation to the special complexities of primate social life. In addition to this hypothesis about the function of intellect, a secondary claim is that the very structure of intelligence has been moulded to be 'social' in character, an idea that presents a challenge to orthodox views of intelligence as a general-purpose capacity. I shall outline the principal components of social intelligence and the environment of social complexity it engages with. This raises the question of whether domain specificity is an appropriate characterization of social intelligence and its subcomponents, like theory of mind. As a counter-argument to such specificity I consider the hypothesis that great apes exhibit a cluster of advanced cognitive abilities that rest on a shared capacity for second-order mental representation.

  18. Evolutionary Psychology and Intelligence Research

    Science.gov (United States)

    Kanazawa, Satoshi

    2010-01-01

    This article seeks to unify two subfields of psychology that have hitherto stood separately: evolutionary psychology and intelligence research/differential psychology. I suggest that general intelligence may simultaneously be an evolved adaptation and an individual-difference variable. Tooby and Cosmides's (1990a) notion of random quantitative…

  19. Information Selection in Intelligence Processing

    Science.gov (United States)

    2011-12-01

    to test and compare the performance of the different algorithms and heuristics described in Chapter III, we have constructed a simulation of the...Routledge. Kaplan, E. H. (2011), “Operations research and intelligence analysis,” in: Fischhoff B. and Chauvin C., Intelligence analysis: behavioral

  20. 30 CFR 285.820 - Will MMS conduct inspections?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Will MMS conduct inspections? 285.820 Section 285.820 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR OFFSHORE RENEWABLE... Inspections and Assessments § 285.820 Will MMS conduct inspections? The MMS will inspect OCS facilities and...

  1. 7 CFR 27.89 - Expenses; inspection; sampling.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Expenses; inspection; sampling. 27.89 Section 27.89... Micronaire § 27.89 Expenses; inspection; sampling. Expense of inspection and sampling, the preparation of the... Office, the expense of inspection, sampling, preparation of samples, and delivery of the samples to the...

  2. Condition Indicators for Inspection Planning of Concrete Structures

    DEFF Research Database (Denmark)

    Faber, Michael Havbro; Sørensen, John Dalsgaard

    2002-01-01

    of the deterioration of the structure may be consistently updated based on inspection results. This facilitates that inspection results may be used in the long term planning of inspection and maintenance of structures. The approach is illustrated on an example considering half-cell measurement inspections...

  3. 9 CFR 355.3 - Plants eligible for inspection.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Plants eligible for inspection. 355.3... § 355.3 Plants eligible for inspection. Upon application, inspection may be granted at a plant where... plant meets with the requirements of this part. Application for Inspection, Certification, and...

  4. 9 CFR 303.2 - Experimentation: Intensity of inspection coverage.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Experimentation: Intensity of inspection coverage. 303.2 Section 303.2 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE... AND VOLUNTARY INSPECTION AND CERTIFICATION EXEMPTIONS § 303.2 Experimentation: Intensity of inspection...

  5. 9 CFR 309.12 - Emergency slaughter; inspection prior to.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Emergency slaughter; inspection prior... AND VOLUNTARY INSPECTION AND CERTIFICATION ANTE-MORTEM INSPECTION § 309.12 Emergency slaughter; inspection prior to. In all cases of emergency slaughter, except as provided in § 311.27 of this subchapter...

  6. 7 CFR 75.19 - Seed lot inspection.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Seed lot inspection. 75.19 Section 75.19 Agriculture... AND CERTIFICATION OF QUALITY OF AGRICULTURAL AND VEGETABLE SEEDS Inspection § 75.19 Seed lot inspection. A lot inspection shall be made by obtaining a representative sample from a specified quantity of...

  7. 8 CFR 235.2 - Parole for deferred inspection.

    Science.gov (United States)

    2010-01-01

    ... 8 Aliens and Nationality 1 2010-01-01 2010-01-01 false Parole for deferred inspection. 235.2 Section 235.2 Aliens and Nationality DEPARTMENT OF HOMELAND SECURITY IMMIGRATION REGULATIONS INSPECTION OF PERSONS APPLYING FOR ADMISSION § 235.2 Parole for deferred inspection. (a) A district director may, in his or her discretion, defer the inspection...

  8. Intelligent acquisition and learning of fluorescence microscope data models.

    Science.gov (United States)

    Jackson, Charles; Murphy, Robert F; Kovacević, Jelena

    2009-09-01

    We propose a mathematical framework and algorithms both to build accurate models of fluorescence microscope time series, as well as to design intelligent acquisition systems based on these models. Model building allows the information contained in the 2-D and 3-D time series to be presented in a more useful and concise form than the raw image data. This is particularly relevant as the trend in biology tends more and more towards high-throughput applications, and the resulting increase in the amount of acquired image data makes visual inspection impractical. The intelligent acquisition system uses an active learning approach to choose the acquisition regions that let us build our model most efficiently, resulting in a shorter acquisition time, as well as a reduction of the amount of photobleaching and phototoxicity incurred during acquisition. We validate our methodology by modeling object motion within a cell. For intelligent acquisition, we propose a set of algorithms to evaluate the information contained in a given acquisition region, as well as the costs associated with acquiring this region in terms of the resulting photobleaching and phototoxicity and the amount of time taken for acquisition. We use these algorithms to determine an acquisition strategy: where and when to acquire, as well as when to stop acquiring. Results, both on synthetic as well as real data, demonstrate accurate model building and large efficiency gains during acquisition.

  9. An operator interface design for a telerobotic inspection system

    Science.gov (United States)

    Kim, Won S.; Tso, Kam S.; Hayati, Samad

    1993-01-01

    The operator interface has recently emerged as an important element for efficient and safe interactions between human operators and telerobotics. Advances in graphical user interface and graphics technologies enable us to produce very efficient operator interface designs. This paper describes an efficient graphical operator interface design newly developed for remote surface inspection at NASA-JPL. The interface, designed so that remote surface inspection can be performed by a single operator with an integrated robot control and image inspection capability, supports three inspection strategies of teleoperated human visual inspection, human visual inspection with automated scanning, and machine-vision-based automated inspection.

  10. Emotional Intelligence in Romanian Business

    Directory of Open Access Journals (Sweden)

    Ecaterina Necsulescu

    2010-06-01

    Full Text Available Intelligence is one quality that all mental activity, the expression of superior organization of all psychological processes, including emotional - motivational. As the forming and developing the mechanismsand operations of all other mental functions we encounter a flexible and versatile intelligence. Unlike IQ, emotional intelligence (EI has proven to be a more reliable predictor of success in personal and professional life. IQ and IE is not opposing powers, but rather separated, but first they can not operate at maximum potential without the second. We tried to identify what emotional intelligence is considered perhaps the most important core competence to determine the success of an organization. Analytical intelligence or IQcompared with that change very little after adolescence, emotional intelligence seems to be largely learned and continue to develop as we go through life and learn from experience. In the quality of being a good user enters emotional intelligence and understanding that it is not and should not be viewed as a replacement or substitute for skills, knowledge or skill gained over time. Emotional intelligence is an innovative and unconventional idea in the business world. Promoters of this concept emphasize its importance in all activities that take an individual as a primary factor of success in personal or professional life. Increasing attention is given to this concept, internationally and, more recently in Romania, should raise an exclamation point on what was hitherto considered to be "intelligent" support development programs of intelligence instruments representing real emotional awareness rising and its impact on everyday life and in business success.

  11. Intelligent nesting system

    Directory of Open Access Journals (Sweden)

    Đuričić Zoran

    2003-01-01

    Full Text Available The economy of the process for the manufacture of parts from sheet metal plates depends on successful solution of the process of cutting various parts from sheet metal plates. Essentially, the problem is to arrange contours within a defined space so that they take up minimal surface. When taken in this way, the considered problem assumes a more general nature; it refers to the utilization of a flat surface, and it can represent a general principle of arranging 2D contours on a certain surface. The paper presents a conceptual solution and a prototypal intelligent nesting system for optimal cutting. The problem of nesting can generally be divided into two intellectual phases: recognition and classification of shapes, and arrangement of recognized shapes on a given surface. In solving these problems, methods of artificial intelligence are applied. In the paper, trained neural network is used for recognition of shapes; on the basis of raster record of a part's drawing, it recognizes the part's shape and which class it belongs to. By means of the expert system, based on rules defined on the basis of acquisition of knowledge from manufacturing sections, as well as on the basis of certain mathematical algorithms, parts are arranged on the arrangement surface. Both systems can also work independently, having been built on the modular principle. The system uses various product models as elements of integration for the entire system. .

  12. Biologically inspired intelligent robots

    Science.gov (United States)

    Bar-Cohen, Yoseph; Breazeal, Cynthia

    2003-07-01

    Humans throughout history have always sought to mimic the appearance, mobility, functionality, intelligent operation, and thinking process of biological creatures. This field of biologically inspired technology, having the moniker biomimetics, has evolved from making static copies of human and animals in the form of statues to the emergence of robots that operate with realistic behavior. Imagine a person walking towards you where suddenly you notice something weird about him--he is not real but rather he is a robot. Your reaction would probably be "I can't believe it but this robot looks very real" just as you would react to an artificial flower that is a good imitation. You may even proceed and touch the robot to check if your assessment is correct but, as oppose to the flower case, the robot may be programmed to respond physical and verbally. This science fiction scenario could become a reality as the current trend continues in developing biologically inspired technologies. Technology evolution led to such fields as artificial muscles, artificial intelligence, and artificial vision as well as biomimetic capabilities in materials science, mechanics, electronics, computing science, information technology and many others. This paper will review the state of the art and challenges to biologically-inspired technologies and the role that EAP is expected to play as the technology evolves.

  13. Are Myxobacteria intelligent?

    Directory of Open Access Journals (Sweden)

    Armin Dale Kaiser

    2013-11-01

    Full Text Available Intelligence is understood in different ways. Because humans are proud of their ability to speak, intelligence often includes the ability to communicate with others, to plan for the future, and to solve frequently encountered problems. Myxobacteria are among the most socially adept and ubiquitous of bacteria that live in the soil. To survive in nature, Myxobacteria communicate with their peers, using signals that elicit specific responses. Both swarming-growth and starvation-induced fruiting body development depend upon the specificity and effectiveness of signals passed between cells. Dynamic swarms spread outward, forming regular multi-cellular and multi-layered structures as they spread. Several different extra-cellular signals have been identified for fruiting body development and one is hypothesized for swarm development. Some extra-cellular signals are small, diffusible molecules. Others are protein molecules. The swarm signal appears to consist of structurally complex, protein to protein, contact junctions between pairs of side by side aligned cells. Each junction persists for less than a minute before disconnecting. After separating, both cells move on to make similar, transient connections with other cells. Eventually, the signal spreads across a prescribed population of communicating cells.

  14. Intelligibility Redefinition and Students’ Confidence in English Speaking in Thai ELT

    OpenAIRE

    Supatranut Singhanuwananon

    2016-01-01

    One of the key aspects of speech is intelligible pronunciation (Derwing and Munro, 2009). As the use of English among non-native English speakers (NNSs) in international communication has grown rapidly, the British Received Pronunciation (RP) and the General American (GA) pronunciation models are doubted by non-native English teachers. The need of changes in pronunciation pedagogy and the definition of intelligibility in English as an International Language (EIL) which focuses on some, but no...

  15. Analysis of the Relation between Artificial Intelligence and the Internet from the Perspective of Brain Science

    OpenAIRE

    Liu, Feng; Shi, Yong; Lia, Peijia

    2018-01-01

    Artificial intelligence (AI) like deep learning, cloud AI computation has been advancing at a rapid pace since 2014. There is no doubt that the prosperity of AI is inseparable with the development of the Internet. However, there has been little attention to the link between AI and the internet. This paper explores them with brain insights mainly from four views:1) How is the general relation between artificial intelligence and Internet of Things, cloud computing, big data and Industrial Inter...

  16. Competitive Intelligence Practices And Their Effect on Profitability of Firms In The Kenyan Banking Industry

    Directory of Open Access Journals (Sweden)

    JOHN KARANJA NGUGI

    2013-07-01

    Full Text Available The rapidly changing business climate created by advances in technologies, economic and social changes as well as fast-shortening product life cycles, which lead to hyper-competition, demands that firms embrace competitive intelligence as a strategy. This study sought to fill the existing knowledge gap by carrying out an investigation of competitive intelligence practices for greater profitability in the commercial banking industry in Kenya. The management staffs who directly deal with the day to day management of the banks were selected to collect primary data. The study concludes that adoption of competitive intelligence practices affect the profitability of the banking sector.

  17. Image recognition and neuronal networks: intelligent systems for the improvement of imaging information.

    Science.gov (United States)

    Karkanis, S; Magoulas, G D; Theofanous, N

    2000-01-01

    Intelligent computerised systems can provide useful assistance to the physician in the rapid identification of tissue abnormalities and accurate diagnosis in real-time. This paper reviews basic issues in medical imaging and neural network-based systems for medical image interpretation. In the framework of intelligent systems, a simple scheme that has been implemented is presented as an example of the use of intelligent systems to discriminate between normal and cancerous regions in colonoscopic images. Preliminary results indicate that this scheme is capable of high accuracy detection of abnormalities within the image. It can also be successfully applied to different types of images, to detect abnormalities that belong to different cancer types.

  18. Combined Intelligent Control (CIC an Intelligent Decision Making Algorithm

    Directory of Open Access Journals (Sweden)

    Moteaal Asadi Shirzi

    2007-03-01

    Full Text Available The focus of this research is to introduce the concept of combined intelligent control (CIC as an effective architecture for decision-making and control of intelligent agents and multi-robot sets. Basically, the CIC is a combination of various architectures and methods from fields such as artificial intelligence, Distributed Artificial Intelligence (DAI, control and biological computing. Although any intelligent architecture may be very effective for some specific applications, it could be less for others. Therefore, CIC combines and arranges them in a way that the strengths of any approach cover the weaknesses of others. In this paper first, we introduce some intelligent architectures from a new aspect. Afterward, we offer the CIC by combining them. CIC has been executed in a multi-agent set. In this set, robots must cooperate to perform some various tasks in a complex and nondeterministic environment with a low sensory feedback and relationship. In order to investigate, improve, and correct the combined intelligent control method, simulation software has been designed which will be presented and considered. To show the ability of the CIC algorithm as a distributed architecture, a central algorithm is designed and compared with the CIC.

  19. Agricultural environment information monitoring instruments based on integrated intelligent sensors

    Science.gov (United States)

    Yu, Guoqing, Sr.; Sha, Zhanyou; Cai, Mingwei

    2009-07-01

    With the rapid development of facility agriculture in rural areas in China, the technology reform related to the auxiliary facilities has become the key factor to promote its development. And how to acquire the agricultural environment information effectively and rapidly becomes the most important factor. This article is aimed to make a study on the technical project of developing high performance and low cost environment monitoring instruments based on integrated intelligent sensors, which includes relative humidity/temperature monitor, intelligent turbidity sensor system with Microprocessor( μC) and single-bus interface and smog auto-detection and alarm system. The monitoring instruments can be applied to the overground information collecting, processing and alarming in greenhouses, poultry houses, livestock stables and so on.

  20. Open source intelligence, open social intelligence and privacy by design

    OpenAIRE

    Casanovas, Pompeu

    2014-01-01

    Ponència presentada a European Conference on Social Intelligence (ECSI-2014) OSINT stands for Open Source Intelligence, (O)SI for (Open) Social Intelligence, PbD for Privacy by Design. The CAPER project has built an OSINT solution oriented to the prevention of organized crime. How to balance freedom and security? This position paper describes a way to embed the legal and ethical issues raised by the General Data Reform Package (GDRP) in Europe into this kind of surveillance platforms. It f...