WorldWideScience

Sample records for rapid induction scheme

  1. Poly(4-vinylphenol) gate insulator with cross-linking using a rapid low-power microwave induction heating scheme for organic thin-film-transistors

    OpenAIRE

    Ching-Lin Fan; Ming-Chi Shang; Mao-Yuan Hsia; Shea-Jue Wang; Bohr-Ran Huang; Win-Der Lee

    2016-01-01

    A Microwave-Induction Heating (MIH) scheme is proposed for the poly(4-vinylphenol) (PVP) gate insulator cross-linking process to replace the traditional oven heating cross-linking process. The cross-linking time is significantly decreased from 1 h to 5 min by heating the metal below the PVP layer using microwave irradiation. The necessary microwave power was substantially reduced to about 50 W by decreasing the chamber pressure. The MIH scheme is a good candidate to replace traditional therma...

  2. 1-1-12 one-step wash-in scheme for desflurane-nitrous oxide low-flow anesthesia: rapid and predictable induction.

    Science.gov (United States)

    Sathitkarnmanee, Thepakorn; Tribuddharat, Sirirat; Suttinarakorn, Chakthip; Nonlhaopol, Duangthida; Thananun, Maneerat; Somdee, Wilawan; Theerapongpakdee, Sunchai

    2014-01-01

    We propose a 1-1-12 wash-in scheme for desflurane-nitrous oxide (N2O) low-flow anesthesia. The objective of our study was to determine the time to achieve alveolar concentration of desflurane (FAD) at 1, 2, 3, 4, 5, and 6%. We enrolled 106 patients scheduled for elective surgery under general anesthesia. After induction and intubation, wash-in was started with a fresh gas flow (FGF) of N2O : O2 1 : 1 L min(-1) and vaporizer concentration of desflurane (FD) of 12%. Ventilation was controlled to maintain PACO2 at 30-35 mmHg. The FAD rose rapidly from 0 to 4% in 2 min in a linear manner in 0.5 min increments. An FAD of 6% was achieved in 4 min in a linear fashion from FAD of 4% but in 1 min increments. An FAD of 1 to 6% occurred at 0.6, 1, 1.5, 2, 3, and 4 min. Heart rate during wash-in showed a statistically, albeit not clinically, significant pattern of increase. By contrast, blood pressure slightly decreased during this period. We developed a 1-1-12 wash-in scheme using a FGF of N2O : O2 1 : 1 L min(-1) and FD of 12% for desflurane-nitrous oxide low-flow anesthesia. A respective FAD of 1, 2, 3, 4, 5, and 6% can be expected at 0.6, 1, 1.5, 2, 3, and 4 min.

  3. 1-1-12 One-Step Wash-In Scheme for Desflurane-Nitrous Oxide Low-Flow Anesthesia: Rapid and Predictable Induction

    Directory of Open Access Journals (Sweden)

    Thepakorn Sathitkarnmanee

    2014-01-01

    Full Text Available Background. We propose a 1-1-12 wash-in scheme for desflurane-nitrous oxide (N2O low-flow anesthesia. The objective of our study was to determine the time to achieve alveolar concentration of desflurane (FAD at 1, 2, 3, 4, 5, and 6%. Methods. We enrolled 106 patients scheduled for elective surgery under general anesthesia. After induction and intubation, wash-in was started with a fresh gas flow (FGF of N2O : O2 1 : 1 L min−1 and vaporizer concentration of desflurane (FD of 12%. Ventilation was controlled to maintain PACO2 at 30–35 mmHg. Results. The FAD rose rapidly from 0 to 4% in 2 min in a linear manner in 0.5 min increments. An FAD of 6% was achieved in 4 min in a linear fashion from FAD of 4% but in 1 min increments. An FAD of 1 to 6% occurred at 0.6, 1, 1.5, 2, 3, and 4 min. Heart rate during wash-in showed a statistically, albeit not clinically, significant pattern of increase. By contrast, blood pressure slightly decreased during this period. Conclusions. We developed a 1-1-12 wash-in scheme using a FGF of N2O : O2 1 : 1 L min−1 and FD of 12% for desflurane-nitrous oxide low-flow anesthesia. A respective FAD of 1, 2, 3, 4, 5, and 6% can be expected at 0.6, 1, 1.5, 2, 3, and 4 min.

  4. Poly(4-vinylphenol gate insulator with cross-linking using a rapid low-power microwave induction heating scheme for organic thin-film-transistors

    Directory of Open Access Journals (Sweden)

    Ching-Lin Fan

    2016-03-01

    Full Text Available A Microwave-Induction Heating (MIH scheme is proposed for the poly(4-vinylphenol (PVP gate insulator cross-linking process to replace the traditional oven heating cross-linking process. The cross-linking time is significantly decreased from 1 h to 5 min by heating the metal below the PVP layer using microwave irradiation. The necessary microwave power was substantially reduced to about 50 W by decreasing the chamber pressure. The MIH scheme is a good candidate to replace traditional thermal heating for cross-linking of PVP as the gate insulator for organic thin-film-transistors.

  5. Poly(4-vinylphenol) gate insulator with cross-linking using a rapid low-power microwave induction heating scheme for organic thin-film-transistors

    Science.gov (United States)

    Fan, Ching-Lin; Shang, Ming-Chi; Hsia, Mao-Yuan; Wang, Shea-Jue; Huang, Bohr-Ran; Lee, Win-Der

    2016-03-01

    A Microwave-Induction Heating (MIH) scheme is proposed for the poly(4-vinylphenol) (PVP) gate insulator cross-linking process to replace the traditional oven heating cross-linking process. The cross-linking time is significantly decreased from 1 h to 5 min by heating the metal below the PVP layer using microwave irradiation. The necessary microwave power was substantially reduced to about 50 W by decreasing the chamber pressure. The MIH scheme is a good candidate to replace traditional thermal heating for cross-linking of PVP as the gate insulator for organic thin-film-transistors.

  6. Investigation of Rapid Low-Power Microwave-Induction Heating Scheme on the Cross-Linking Process of the Poly(4-vinylphenol) for the Gate Insulator of Pentacene-Based Thin-Film Transistors.

    Science.gov (United States)

    Fan, Ching-Lin; Shang, Ming-Chi; Wang, Shea-Jue; Hsia, Mao-Yuan; Lee, Win-Der; Huang, Bohr-Ran

    2017-07-03

    In this study, a proposed Microwave-Induction Heating (MIH) scheme has been systematically studied to acquire suitable MIH parameters including chamber pressure, microwave power and heating time. The proposed MIH means that the thin indium tin oxide (ITO) metal below the Poly(4-vinylphenol) (PVP) film is heated rapidly by microwave irradiation and the heated ITO metal gate can heat the PVP gate insulator, resulting in PVP cross-linking. It is found that the attenuation of the microwave energy decreases with the decreasing chamber pressure. The optimal conditions are a power of 50 W, a heating time of 5 min, and a chamber pressure of 20 mTorr. When suitable MIH parameters were used, the effect of PVP cross-linking and the device performance were similar to those obtained using traditional oven heating, even though the cross-linking time was significantly decreased from 1 h to 5 min. Besides the gate leakage current, the interface trap state density (Nit) was also calculated to describe the interface status between the gate insulator and the active layer. The lowest interface trap state density can be found in the device with the PVP gate insulator cross-linked by using the optimal MIH condition. Therefore, it is believed that the MIH scheme is a good candidate to cross-link the PVP gate insulator for organic thin-film transistor applications as a result of its features of rapid heating (5 min) and low-power microwave-irradiation (50 W).

  7. Investigation of Rapid Low-Power Microwave-Induction Heating Scheme on the Cross-Linking Process of the Poly(4-vinylphenol for the Gate Insulator of Pentacene-Based Thin-Film Transistors

    Directory of Open Access Journals (Sweden)

    Ching-Lin Fan

    2017-07-01

    Full Text Available In this study, a proposed Microwave-Induction Heating (MIH scheme has been systematically studied to acquire suitable MIH parameters including chamber pressure, microwave power and heating time. The proposed MIH means that the thin indium tin oxide (ITO metal below the Poly(4-vinylphenol (PVP film is heated rapidly by microwave irradiation and the heated ITO metal gate can heat the PVP gate insulator, resulting in PVP cross-linking. It is found that the attenuation of the microwave energy decreases with the decreasing chamber pressure. The optimal conditions are a power of 50 W, a heating time of 5 min, and a chamber pressure of 20 mTorr. When suitable MIH parameters were used, the effect of PVP cross-linking and the device performance were similar to those obtained using traditional oven heating, even though the cross-linking time was significantly decreased from 1 h to 5 min. Besides the gate leakage current, the interface trap state density (Nit was also calculated to describe the interface status between the gate insulator and the active layer. The lowest interface trap state density can be found in the device with the PVP gate insulator cross-linked by using the optimal MIH condition. Therefore, it is believed that the MIH scheme is a good candidate to cross-link the PVP gate insulator for organic thin-film transistor applications as a result of its features of rapid heating (5 min and low-power microwave-irradiation (50 W.

  8. SCHEME-FIELD MODELING OF THERMAL PROCESSES IN INDUCTION MOTORS

    Directory of Open Access Journals (Sweden)

    D. O. Litvinov

    2017-07-01

    Practical significance. The integrated method for converting data of induction motor field modeling into thermal model parameters allows at increase in the number of nodes in thermal scheme from one to ten to reduce the average value of a relative error from 9,2% to 2,42%, what completely meets requirements at designing of induction motors, and also for imitating modeling of thermal processes dynamics at the variable operating conditions.

  9. Rapid induction of false memory for pictures.

    Science.gov (United States)

    Weinstein, Yana; Shanks, David R

    2010-07-01

    Recognition of pictures is typically extremely accurate, and it is thus unclear whether the reconstructive nature of memory can yield substantial false recognition of highly individuated stimuli. A procedure for the rapid induction of false memories for distinctive colour photographs is proposed. Participants studied a set of object pictures followed by a list of words naming those objects, but embedded in the list were names of unseen objects. When subsequently shown full colour pictures of these unseen objects, participants consistently claimed that they had seen them, while discriminating with high accuracy between studied pictures and new pictures whose names did not appear in the misleading word list. These false memories can be reported with high confidence as well as the feeling of recollection. This new procedure allows the investigation of factors that influence false memory reports with ecologically valid stimuli and of the similarities and differences between true and false memories.

  10. A Variable Frequency Tuning Scheme for Inductive Plasma Sources

    Science.gov (United States)

    Niazi, Kaveh; Chen, Zhan; Karpenko, Oleh

    2003-10-01

    A common approach for the efficient coupling of RF power to an inductive plasma source consists of a matching network with variable capacitive components that adjust in response to the varying load conditions of the plasma source. The use of variable capacitances in industrial applications such as semiconductor equipment is non-trivial, however. The high voltage ratings often required for semiconductor equipment result in capacitors that are expensive and quite bulky. In addition the motors that are used to adjust the capacitances often have a slower response time than desired. An alternate approach, the use of fixed capacitors and a variable frequency source signal to reduce the reflection coefficient, ñ, to an acceptable level, addresses both these concerns and is discussed in this paper. By using a circuit model for the plasma source and matching network, it is possible to predict an optimal frequency and corresponding reflection coefficient for a given plasma load condition. In this paper numerical predictions of the reflection coefficient for the variable frequency matching scheme are presented for common inductive plasma source impedance parameters. In addition if the limits on the allowed VSWR and the plasma source impedance are specified, the numerical model presented provides a simple scheme for specifying the required frequency range and fixed capacitance values for the matching network.

  11. A simplified scheme for induction motor condition monitoring

    Science.gov (United States)

    Rodríguez, Pedro Vicente Jover; Negrea, Marian; Arkkio, Antero

    2008-07-01

    This work proposes a general scheme to detect induction motor fault by monitoring the motor current. The scheme is based on signal processing (predictive filters) and soft computing technique (fuzzy logic). The predictive filter is used in order to separate the fundamental component from the harmonic components. Fuzzy logic is used to identify the motor state. Finite element method (FEM) is utilised to generate virtual data that allows to test the proposed technique and foresee the change in the current under different motor conditions. A simple and reliable method for the detection of stator winding failures based on the phase current amplitudes is implemented and tested. The layout has been proved in MATLAB/SIMULINK, with both data from FEM motor simulation program and real measurements. The proposed method has the ability to work with variable speed drives and avoids the detailed spectral analysis of the motor current. This work shows the feasibility of spotting broken rotor bars, eccentricities and inter-turn short-circuit by monitoring the motor currents.

  12. Rotor speed estimation for indirect stator flux oriented induction motor drive based on MRAS scheme

    Directory of Open Access Journals (Sweden)

    Youssef Agrebi

    2007-09-01

    Full Text Available In this paper, a conventional indirect stator flux oriented controlled (ISFOC induction motor drive is presented. In order to eliminate the speed sensor, an adaptation algorithm for tuning the rotor speed is proposed. Based on the model reference adaptive system (MRAS scheme, the rotor speed is tuned to obtain an exact ISFOC induction motor drive. The reference and adjustable models, developed in stationary stator reference frame, are used in the MRAS scheme to estimate induction rotor peed from measured terminal voltages and currents. The IP gains speed controller and PI gains current controller are calculated and tuned at each sampling time according to the new estimated rotor speed. The proposed algorithm has been tested by numerical simulation, showing the capability of driving active load; and stability is preserved. Experimental results obtained with a general-purpose 1-kW induction machine are presented showing the effectiveness of the proposed approach in terms of dynamic performance.

  13. Failed rapid sequence induction in an achondroplastic dwarf

    Directory of Open Access Journals (Sweden)

    Jasleen Kaur

    2011-01-01

    Full Text Available Achondroplasia, a common cause of short limbed type of dwarfism is due to quantitative decrease in rate of endochondral ossification. This abnormal bone growth leads to disproportionate body and head structure, thus placing them under high risk for anaesthetic management. There is paucity in literatures, regarding appropriate drug dosage selection in these patients. Use of drugs as per standard dosage recommendations based on body weight or body surface area, may not be adequate in these patients owing to discrepancies in overall body weight and lean body weight, especially during rapid sequence induction. Here, we report a case of failed rapid sequence induction due to abnormal response to administered drugs in an adult achondroplastic dwarf. Standard doses of thiopentone and rocuronium had to be repeated thrice to achieve adequate conditions for intubation.

  14. Novel scheme for enhancement of fault ride-through capability of doubly fed induction generator based wind farms

    Energy Technology Data Exchange (ETDEWEB)

    Vinothkumar, K. [Department of Electrical and Electronics Engineering, National Institute of Technology, Tiruchirappalli, Tamilnadu 620015 (India); Selvan, M.P., E-mail: selvanmp@nitt.ed [Department of Electrical and Electronics Engineering, National Institute of Technology, Tiruchirappalli, Tamilnadu 620015 (India)

    2011-07-15

    Research highlights: {yields} Proposed Fault ride-through (FRT) scheme for DFIG is aimed at energy conservation. {yields} The input mechanical energy is stored during fault and utilized at fault clearance. {yields} Enhanced Rotor speed stability of DFIG. {yields} Reduced Reactive power requirement and rapid voltage recovery at fault clearance. {yields} Improved post fault performance of DFIG at fault clearance. -- Abstract: Enhancement of fault ride-through (FRT) capability and subsequent improvement of rotor speed stability of wind farms equipped with doubly fed induction generator (DFIG) is the objective of this paper. The objective is achieved by employing a novel FRT scheme with suitable control strategy. The proposed FRT scheme, which is connected between the rotor circuit and dc link capacitor in parallel with Rotor Side Converter, consists of an uncontrolled rectifier, two sets of IGBT switches, a diode and an inductor. In this scheme, the input mechanical energy of the wind turbine during grid fault is stored and utilized at the moment of fault clearance, instead of being dissipated in the resistors of the crowbar circuit as in the existing FRT schemes. Consequently, torque balance between the electrical and mechanical quantities is achieved and hence the rotor speed deviation and electromagnetic torque fluctuations are reduced. This results in reduced reactive power requirement and rapid reestablishment of terminal voltage on fault clearance. Furthermore, the stored electromagnetic energy in the inductor is transferred into the dc link capacitor on fault clearance and hence the grid side converter is relieved from charging the dc link capacitor, which is very crucial at this moment, and this converter can be utilized to its full capacity for rapid restoration of terminal voltage and normal operation of DFIG. Extensive simulation study carried out employing PSCAD/EMTDC software vividly demonstrates the potential capabilities of the proposed scheme in

  15. Influence of parameters detuning on induction motor NFO shaft-sensorless scheme

    Directory of Open Access Journals (Sweden)

    KULIC, F.

    2010-11-01

    Full Text Available In this paper, the parameter sensitivity analysis of shaft-sensorless induction motor drive with natural field orientation (NFO scheme is performed. NFO scheme calculates rotor flux position using the rotor flux vector reference only, does not require significant processor power and therefore it is suitable for low cost shaft sensorless drives. This concept also eliminates the need for sensitive stator voltage vector integration and it is usable in low rotor speed range. However, low speeds are coupled with low stator voltage amplitudes, which inflate the NFO scheme sensitivity to an error in stator resistance parameter. Similar problems can also take place if mutual inductance parameter is detuned, but this time in whole speed range. This paper investigates the influence of each parameter error on the NFO control steady state characteristics and dynamic performance.

  16. The Hypnotic Induction in the Broad Scheme of Hypnosis: A Sociocognitive Perspective.

    Science.gov (United States)

    Lynn, Steven Jay; Maxwell, Reed; Green, Joseph P

    2017-04-01

    Researchers and clinicians typically divide hypnosis into two distinct parts: the induction and the suggestions that follow. We suggest that this distinction is arbitrary and artificial. Different definitions of hypnosis ascribe different roles to the hypnotic induction, yet none clearly specifies the mechanisms that mediate or moderate subjective and behavioral responses to hypnotic suggestions. Researchers have identified few if any differences in responding across diverse hypnotic inductions, and surprisingly little research has focused on the specific ingredients that optimize responsiveness. From a sociocognitive perspective, we consider the role of inductions in the broader scheme of hypnosis and suggest that there is no clear line of demarcation between prehypnotic information, the induction, suggestions, and other constituents of the hypnotic context. We describe research efforts to maximize responses to hypnotic suggestions, which encompass the induction and other aspects of the broader hypnotic framework, and conclude with a call for more research on inductions and suggestions to better understand their role within hypnotic interventions in research and clinical contexts.

  17. New Space Vector Selection Scheme for VSI Supplied Dual Three-Phase Induction Machine

    Directory of Open Access Journals (Sweden)

    MILICEVIC, D.

    2013-02-01

    Full Text Available This paper presents a novel space vector selection scheme applicable for the control of dual three-phase induction motor drives supplied from a six-phase voltage source inverter (VSI. The vector selection method is based on the vector space decomposition technique (VSD. Unique vector selection pattern simplifies problems related to complicated implementation of standard VSD in commercially available digital signals processors (DSP. The proposed vector selection scheme is verified through a theoretical analysis, computer simulations and practical experimental results conducted on a dual three-phase test rig prototype with control algorithm implemented in Texas Instrument?s TMS320F2808 DSP.

  18. Student Teachers’ Proof Schemes on Proof Tasks Involving Inequality: Deductive or Inductive?

    Science.gov (United States)

    Rosyidi, A. H.; Kohar, A. W.

    2018-01-01

    Exploring student teachers’ proof ability is crucial as it is important for improving the quality of their learning process and help their future students learn how to construct a proof. Hence, this study aims at exploring at the proof schemes of student teachers in the beginning of their studies. Data were collected from 130 proofs resulted by 65 Indonesian student teachers on two proof tasks involving algebraic inequality. To analyse, the proofs were classified into the refined proof schemes level proposed by Lee (2016) ranging from inductive, which only provides irrelevant inferences, to deductive proofs, which consider addressing formal representation. Findings present several examples of each of Lee’s level on the student teachers’ proofs spanning from irrelevant inferences, novice use of examples or logical reasoning, strategic use examples for reasoning, deductive inferences with major and minor logical coherence, and deductive proof with informal and formal representation. Besides, it was also found that more than half of the students’ proofs coded as inductive schemes, which does not meet the requirement for doing the proof for the proof tasks examined in this study. This study suggests teacher educators in teacher colleges to reform the curriculum regarding proof learning which can accommodate the improvement of student teachers’ proving ability from inductive to deductive proof as well from informal to formal proof.

  19. Rapid Calculation of EMI Responses of Metallic Objects and Implementation in Inversion Schemes

    National Research Council Canada - National Science Library

    Paulsen, Keith

    2003-01-01

    .... Nonetheless, signal inversion schemes are impeded by a lack of rapid means for calculating the responses of possible target types in a great variety of depths and dispositions relative to the sensor...

  20. Estimation of Stator Winding Faults in Induction Motors using an Adaptive Observer Scheme

    DEFF Research Database (Denmark)

    Kallesøe, C. S.; Vadstrup, P.; Rasmussen, Henrik

    2004-01-01

    This paper addresses the subject of inter-turn short circuit estimation in the stator of an induction motor. In the paper an adaptive observer scheme is proposed. The proposed observer is capable of simultaneously estimating the speed of the motor, the amount turns involved in the short circuit...... and an expression of the current in the short circuit. Moreover the states of the motor are estimated, meaning that the magnetizing currents are made available even though a fault has happened in the motor. To be able to develop this observer, a model particular suitable for the chosen observer design, is also...... derived. The efficiency of the proposed observer is demonstrated by tests performed on a test setup with a customized designed induction motor. With this motor it is possible to simulate inter-turn short circuit faults....

  1. Estimation of Stator winding faults in induction motors using an adaptive observer scheme

    DEFF Research Database (Denmark)

    Kallesøe, C. S.; Vadstrup, P.; Rasmussen, Henrik

    2004-01-01

    This paper addresses the subject of inter-turn short circuit estimation in the stator of an induction motor. In the paper an adaptive observer scheme is proposed. The proposed observer is capable of simultaneously estimating the speed of the motor, the amount turns involved in the short circuit...... and an expression of the current in the short circuit. Moreover the states of the motor are estimated, meaning that the magnetizing currents are made available even though a fault has happened in the motor. To be able to develop this observer, a model particular suitable for the chosen observer design, is also...... derived. The efficiency of the proposed observer is demonstrated by tests performed on a test setup with a customized designed induction motor. With this motor it is possible to simulate inter-turn short circuit faults....

  2. Artificial neural network based fault identification scheme implementation for a three-phase induction motor.

    Science.gov (United States)

    Kolla, Sri R; Altman, Shawn D

    2007-04-01

    This paper presents results from the implementation and testing of a PC based monitoring and fault identification scheme for a three-phase induction motor using artificial neural networks (ANNs). To accomplish the task, a hardware system is designed and built to acquire three-phase voltages and currents from a 1/3 HP squirrel-cage, three-phase induction motor. A software program is written to read the voltages and currents, which are first used to train a feed-forward neural network structure using the JavaNNS program. The trained network is placed in a LabVIEW based program formula node that monitors the voltages and currents online and displays the fault conditions and turns the motor off. The complete system is successfully tested in real time by creating different faults on the motor.

  3. A flexible and rapid frequency selective scheme for SRS microscopy

    Science.gov (United States)

    Li, Jingting; Yue, Yuankai; Shih, Wei-Chuan

    2017-02-01

    Stimulated Raman scattering (SRS) is a label-free imaging technique suitable for studying biological systems. Due to stimulated nature by ultrafast laser pulses, SRS microscopy has the advantage of significantly higher sensitivity but often reduced spectroscopic information. In this paper, we present a newly constructed femtosecond SRS microscope with a high-speed dynamic micromirror device based pulse shaper to achieve flexible and rapid frequency selection within the C-H stretch region near 2800 to 3100 cm-1 with spectral width of 30 cm-1. This technique is applicable to lipid profiling such as cell activity mapping, lipid distribution mapping and distinction among subclasses.

  4. Hardware Implementation and a New Adaptation in the Winding Scheme of Standard Three Phase Induction Machine to Utilize for Multifunctional Operation: A New Multifunctional Induction Machine

    Directory of Open Access Journals (Sweden)

    Mahajan Sagar Bhaskar

    2017-11-01

    Full Text Available In this article a new distinct winding scheme is articulated to utilize three phase induction machines for multifunctional operation. Because of their rugged construction and reduced maintenance induction machines are very popular and well-accepted for agricultural as well as industrial purposes. The proposed winding scheme is used in a three phase induction machine to utilize the machine for multifunctional operation. It can be used as a three-phase induction motor, welding transformer and phase converter. The proposed machine design also works as a single phase induction motor at the same time it works as a three-phase to single phase converter. This new design does not need any kind of special arrangement and can be constructed with small modifications to any standard three-phase induction motor. This modified induction machine is thoroughly tested to determine its efficiency and other parameters and also hardware implementation results are provided in the article, which validate the design and construction.

  5. Numerical simulation of the rapid intensification of Hurricane Katrina (2005): Sensitivity to boundary layer parameterization schemes

    Science.gov (United States)

    Liu, Jianjun; Zhang, Feimin; Pu, Zhaoxia

    2017-04-01

    Accurate forecasting of the intensity changes of hurricanes is an important yet challenging problem in numerical weather prediction. The rapid intensification of Hurricane Katrina (2005) before its landfall in the southern US is studied with the Advanced Research version of the WRF (Weather Research and Forecasting) model. The sensitivity of numerical simulations to two popular planetary boundary layer (PBL) schemes, the Mellor-Yamada-Janjic (MYJ) and the Yonsei University (YSU) schemes, is investigated. It is found that, compared with the YSU simulation, the simulation with the MYJ scheme produces better track and intensity evolution, better vortex structure, and more accurate landfall time and location. Large discrepancies (e.g., over 10 hPa in simulated minimum sea level pressure) are found between the two simulations during the rapid intensification period. Further diagnosis indicates that stronger surface fluxes and vertical mixing in the PBL from the simulation with the MYJ scheme lead to enhanced air-sea interaction, which helps generate more realistic simulations of the rapid intensification process. Overall, the results from this study suggest that improved representation of surface fluxes and vertical mixing in the PBL is essential for accurate prediction of hurricane intensity changes.

  6. Rapid Immunization Scheme for Spouses of Individuals Estabilished as Hepatitis B Carriers during Premarital Tests

    Directory of Open Access Journals (Sweden)

    Selma Tosun

    2012-01-01

    Full Text Available Background. The aim of this study was to monitor the cases identified as hepatitis B carriers during premarital tests, to vaccinate their prospective spouses with a rapid vaccination scheme, and to compare the anti-HBs responses with the traditional vaccination scheme. Methods. Blood samples of 1250 couple spouses were tested for HBsAg and anti-HBs. HBsAg positive cases' fiancées which were found HBV negative were administered a rapid three-dose vaccination scheme on days 0, 7, and 21. Forty controls with similar age and gender were also were administered three doses of the same vaccine. Results. Out of 1250 cases (625 couples, 46 (3.6% were HBsAg positive, and 40 of them aged between 18 and 39 were admitted to the rapid vaccination program. Conclusion. Upon determination of HBsAg positivity in premarital tests, a rapid vaccination program provides early protection, but the 6th and 12th month vaccinations are also required. Anti-HBs response should be monitored.

  7. Rapid sequence induction and intubation with rocuronium-sugammadex compared with succinylcholine

    DEFF Research Database (Denmark)

    Sørensen, M K; Bretlau, C; Gätke, M R

    2012-01-01

    An unanticipated difficult airway may arise during rapid sequence induction and intubation (RSII). The aim of the trial was to assess how rapidly spontaneous ventilation could be re-established after RSII. We hypothesized that the time period from tracheal intubation to spontaneous ventilation...

  8. Rapid induction of senescence in human cervical carcinoma cells

    Science.gov (United States)

    Goodwin, Edward C.; Yang, Eva; Lee, Chan-Jae; Lee, Han-Woong; Dimaio, Daniel; Hwang, Eun-Seong

    2000-09-01

    Expression of the bovine papillomavirus E2 regulatory protein in human cervical carcinoma cell lines repressed expression of the resident human papillomavirus E6 and E7 oncogenes and within a few days caused essentially all of the cells to synchronously display numerous phenotypic markers characteristic of cells undergoing replicative senescence. This process was accompanied by marked but in some cases transient alterations in the expression of cell cycle regulatory proteins and by decreased telomerase activity. We propose that the human papillomavirus E6 and E7 proteins actively prevent senescence from occurring in cervical carcinoma cells, and that once viral oncogene expression is extinguished, the senescence program is rapidly executed. Activation of endogenous senescence pathways in cancer cells may represent an alternative approach to treat human cancers.

  9. Real And Reactive Power Saving In Three Phase Induction Machine Using Star-Delta Switching Schemes

    Directory of Open Access Journals (Sweden)

    Ramesh Daravath

    2015-08-01

    Full Text Available Induction machines are the most commonly used industrial drives for variety of applications. It has been estimated that induction motors consumes approximately 50 of all the electric energy generated. Further in the area of renewable energy sources such as wind or bio-mass energy induction machines have been found suitable for functioning as generators. In this context it may be mentioned that a star-delta switching is common for the starting of three-phase induction motor. Now it is proposed to use this star-delta switching for energy conservation of induction machines i.e. at times of reduced loads the machine switched back to star connection. Using a three-phase 400 V 50 Hz 4-pole induction machine it has been demonstrated that the star-delta switching of stator winding of three-phase induction machine motor generator operations reconnected in star at suitable reduced loads with a switching arrangement can result in improved efficiency and power factor as compared to a fixed delta or star connection. The predetermined values along with the experimental results have also been presented in this report. A simulation program has been developed for the predetermination of performance of the three-phase induction machine using exact equivalent circuit. A case study on a 250 kW 400 V 4-pole three-phase induction machine operated with different load cycles reveals the significant real and reactive power savings that could be obtained in the present proposal.

  10. Von Neumann stability analysis of globally divergence-free RKDG schemes for the induction equation using multidimensional Riemann solvers

    Science.gov (United States)

    Balsara, Dinshaw S.; Käppeli, Roger

    2017-05-01

    In this paper we focus on the numerical solution of the induction equation using Runge-Kutta Discontinuous Galerkin (RKDG)-like schemes that are globally divergence-free. The induction equation plays a role in numerical MHD and other systems like it. It ensures that the magnetic field evolves in a divergence-free fashion; and that same property is shared by the numerical schemes presented here. The algorithms presented here are based on a novel DG-like method as it applies to the magnetic field components in the faces of a mesh. (I.e., this is not a conventional DG algorithm for conservation laws.) The other two novel building blocks of the method include divergence-free reconstruction of the magnetic field and multidimensional Riemann solvers; both of which have been developed in recent years by the first author. Since the method is linear, a von Neumann stability analysis is carried out in two-dimensions to understand its stability properties. The von Neumann stability analysis that we develop in this paper relies on transcribing from a modal to a nodal DG formulation in order to develop discrete evolutionary equations for the nodal values. These are then coupled to a suitable Runge-Kutta timestepping strategy so that one can analyze the stability of the entire scheme which is suitably high order in space and time. We show that our scheme permits CFL numbers that are comparable to those of traditional RKDG schemes. We also analyze the wave propagation characteristics of the method and show that with increasing order of accuracy the wave propagation becomes more isotropic and free of dissipation for a larger range of long wavelength modes. This makes a strong case for investing in higher order methods. We also use the von Neumann stability analysis to show that the divergence-free reconstruction and multidimensional Riemann solvers are essential algorithmic ingredients of a globally divergence-free RKDG-like scheme. Numerical accuracy analyses of the RKDG

  11. An Enhanced Three-Level Voltage Switching State Scheme for Direct Torque Controlled Open End Winding Induction Motor

    Science.gov (United States)

    Kunisetti, V. Praveen Kumar; Thippiripati, Vinay Kumar

    2018-01-01

    Open End Winding Induction Motors (OEWIM) are popular for electric vehicles, ship propulsion applications due to less DC link voltage. Electric vehicles, ship propulsions require ripple free torque. In this article, an enhanced three-level voltage switching state scheme for direct torque controlled OEWIM drive is implemented to reduce torque and flux ripples. The limitations of conventional Direct Torque Control (DTC) are: possible problems during low speeds and starting, it operates with variable switching frequency due to hysteresis controllers and produces higher torque and flux ripple. The proposed DTC scheme can abate the problems of conventional DTC with an enhanced voltage switching state scheme. The three-level inversion was obtained by operating inverters with equal DC-link voltages and it produces 18 voltage space vectors. These 18 vectors are divided into low and high frequencies of operation based on rotor speed. The hardware results prove the validity of proposed DTC scheme during steady-state and transients. From simulation and experimental results, proposed DTC scheme gives less torque and flux ripples on comparison to two-level DTC. The proposed DTC is implemented using dSPACE DS-1104 control board interface with MATLAB/SIMULINK-RTI model.

  12. Effects of oral tacrolimus as a rapid induction therapy in ulcerative colitis

    Science.gov (United States)

    Kawakami, Ken; Inoue, Takuya; Murano, Mitsuyuki; Narabayashi, Ken; Nouda, Sadaharu; Ishida, Kumi; Abe, Yosuke; Nogami, Koji; Hida, Nobuyuki; Yamagami, Hirokazu; Watanabe, Kenji; Umegaki, Eiji; Nakamura, Shiro; Arakawa, Tetsuo; Higuchi, Kazuhide

    2015-01-01

    AIM: To determine the efficacy and safety of rapid induction therapy with oral tacrolimus without a meal in steroid-refractory ulcerative colitis (UC) patients. METHODS: This was a prospective, multicenter, observational study. Between May 2010 and August 2012, 49 steroid-refractory UC patients (55 flare-ups) were consecutively enrolled. All patients were treated with oral tacrolimus without a meal at an initial dose of 0.1 mg/kg per day. The dose was adjusted to maintain trough whole-blood levels of 10-15 ng/mL for the first 2 wk. Induction of remission at 2 and 4 wk after tacrolimus treatment initiation was evaluated using Lichtiger’s clinical activity index (CAI). RESULTS: The mean CAI was 12.6 ± 3.6 at onset. Within the first 7 d, 93.5% of patients maintained high trough levels (10-15 ng/mL). The CAI significantly decreased beginning 2 d after treatment initiation. At 2 wk, 73.1% of patients experienced clinical responses. After tacrolimus initiation, 31.4% and 75.6% of patients achieved clinical remission at 2 and 4 wk, respectively. Treatment was well tolerated. CONCLUSION: Rapid induction therapy with oral tacrolimus shortened the time to achievement of appropriate trough levels and demonstrated a high remission rate 28 d after treatment initiation. Rapid induction therapy with oral tacrolimus appears to be a useful therapy for the treatment of refractory UC. PMID:25684955

  13. An efficient and stable hybrid extended Lagrangian/self-consistent field scheme for solving classical mutual induction

    Science.gov (United States)

    Albaugh, Alex; Demerdash, Omar; Head-Gordon, Teresa

    2015-11-01

    We have adapted a hybrid extended Lagrangian self-consistent field (EL/SCF) approach, developed for time reversible Born Oppenheimer molecular dynamics for quantum electronic degrees of freedom, to the problem of classical polarization. In this context, the initial guess for the mutual induction calculation is treated by auxiliary induced dipole variables evolved via a time-reversible velocity Verlet scheme. However, we find numerical instability, which is manifested as an accumulation in the auxiliary velocity variables, that in turn results in an unacceptable increase in the number of SCF cycles to meet even loose convergence tolerances for the real induced dipoles over the course of a 1 ns trajectory of the AMOEBA14 water model. By diagnosing the numerical instability as a problem of resonances that corrupt the dynamics, we introduce a simple thermostating scheme, illustrated using Berendsen weak coupling and Nose-Hoover chain thermostats, applied to the auxiliary dipole velocities. We find that the inertial EL/SCF (iEL/SCF) method provides superior energy conservation with less stringent convergence thresholds and a correspondingly small number of SCF cycles, to reproduce all properties of the polarization model in the NVT and NVE ensembles accurately. Our iEL/SCF approach is a clear improvement over standard SCF approaches to classical mutual induction calculations and would be worth investigating for application to ab initio molecular dynamics as well.

  14. Induction and Mentoring of Novice Teachers: A Scheme for the United Arab Emirates

    Science.gov (United States)

    Ibrahim, Ali S.

    2012-01-01

    Induction and mentoring of novice teachers have gained considerable worldwide attention. However, in the United Arab Emirates, graduates from teacher education programmes are recruited as teachers without being provided with any formal school-based support. They suffer from stress, overload, and low self-esteem and a high percentage leave…

  15. A Very Low-Speed Sensorless Induction Motor Drive with Online Stator Resistance identification scheme

    Directory of Open Access Journals (Sweden)

    M. Zaky

    2008-03-01

    Full Text Available Recently, speed sensorless control of induction motor drives received great attention to avoid the different problems associated with direct speed sensors. However, low speed operation with robustness against parameter variations remains an area of research for sensorless systems. Stator resistance is of greatest importance for good operation of speed sensorless systems in low speed region. In this paper, a sliding mode current observer for an induction motor is presented. An estimation algorithm based on this observer in conjunction with Popov's hyper-stability theory is proposed to calculate the speed and stator resistance independently. The proposed speed observer with parallel stator resistance identification is firstly verified by simulation. Experimental results are included as well to demonstrate the good performance of the proposed observer and estimation algorithms at low speed.

  16. Novel Observer Scheme of Fuzzy-MRAS Sensorless Speed Control of Induction Motor Drive

    Science.gov (United States)

    Chekroun, S.; Zerikat, M.; Mechernene, A.; Benharir, N.

    2017-01-01

    This paper presents a novel approach Fuzzy-MRAS conception for robust accurate tracking of induction motor drive operating in a high-performance drives environment. Of the different methods for sensorless control of induction motor drive the model reference adaptive system (MRAS) finds lot of attention due to its good performance. The analysis of the sensorless vector control system using MRAS is presented and the resistance parameters variations and speed observer using new Fuzzy Self-Tuning adaptive IP Controller is proposed. In fact, fuzzy logic is reminiscent of human thinking processes and natural language enabling decisions to be made based on vague information. The present approach helps to achieve a good dynamic response, disturbance rejection and low to plant parameter variations of the induction motor. In order to verify the performances of the proposed observer and control algorithms and to test behaviour of the controlled system, numerical simulation is achieved. Simulation results are presented and discussed to shown the validity and the performance of the proposed observer.

  17. Utilization of rapid infusion system with cold saline in the induction of therapeutic hypothermia.

    Science.gov (United States)

    Jin, Sung Woong; Choi, Yoon Hee; Lee, Dong Hoon

    2014-06-01

    To examine the cooling effectiveness of a rapid infusion system (RIS) during induction of therapeutic hypothermia. This laboratory study simulated the effect of three fluid delivery methods: rapid dripping without any other equipment (control); RIS; pressure bag. Cold energy loss (℃ × min) was calculated as: (temperature of the proximal thermoprobe--temperature of the distal thermoprobe) × (total infusion time). Infusion time was significantly shorter and cold energy loss significantly lower in the RIS group than in the two other groups. RIS preserves the cold energy of fluid more effectively than pressure bag or control. RIS allows for rapid infusion at a constant pressure and can be easily applied in an emergency setting. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  18. [Optinization of rapid propagation technique and induction and identification of autotetraploid of Polygonum multiflorum].

    Science.gov (United States)

    Huang, He-Ping; Gao, Shan-Lin; Wang, Jian; Huang, Lu-Qi; Huang, Peng

    2013-05-01

    To establish and optimize the rapid propagation system of Polygonum multiflorum, as well as explore method for induction and identification of autotetraploid. Propagation medium was optimized by orthogonal test. The buds were immersed in colchicine solution with different concentrations for different time to select induction conditions for autotetraploid of P. multiflorum. The most appropriate propagation medium was MS medium supplemented with 1.0 mg x L(-1) 6-BA, 0.3 mg x L(-1) NAA, and 0.4 mg x L(-1) PP333. That the buds were soaked in 0.2% colchicine solution for 30 h, or soaked in 0.3% colchicine solution for 18 h, was optimal condition to induce autopolyploid of P. multiflorum with induction rate as high as 16.7%. Rapid propagation of P. multiflorum could be achieved by tissue culture. Furthermore, colchicine was an effective inducer of polyploidy, and 25 tetraploid lines were obtained through chromosome identification. The experiment laid a foundation for the wild resource conservation, superior varieties breeding of P. multiflorum.

  19. An Extended Multilocus Sequence Typing (MLST Scheme for Rapid Direct Typing of Leptospira from Clinical Samples.

    Directory of Open Access Journals (Sweden)

    Sabrina Weiss

    2016-09-01

    Full Text Available Rapid typing of Leptospira is currently impaired by requiring time consuming culture of leptospires. The objective of this study was to develop an assay that provides multilocus sequence typing (MLST data direct from patient specimens while minimising costs for subsequent sequencing.An existing PCR based MLST scheme was modified by designing nested primers including anchors for facilitated subsequent sequencing. The assay was applied to various specimen types from patients diagnosed with leptospirosis between 2014 and 2015 in the United Kingdom (UK and the Lao Peoples Democratic Republic (Lao PDR. Of 44 clinical samples (23 serum, 6 whole blood, 3 buffy coat, 12 urine PCR positive for pathogenic Leptospira spp. at least one allele was amplified in 22 samples (50% and used for phylogenetic inference. Full allelic profiles were obtained from ten specimens, representing all sample types (23%. No nonspecific amplicons were observed in any of the samples. Of twelve PCR positive urine specimens three gave full allelic profiles (25% and two a partial profile. Phylogenetic analysis allowed for species assignment. The predominant species detected was L. interrogans (10/14 and 7/8 from UK and Lao PDR, respectively. All other species were detected in samples from only one country (Lao PDR: L. borgpetersenii [1/8]; UK: L. kirschneri [1/14], L. santarosai [1/14], L. weilii [2/14].Typing information of pathogenic Leptospira spp. was obtained directly from a variety of clinical samples using a modified MLST assay. This assay negates the need for time-consuming culture of Leptospira prior to typing and will be of use both in surveillance, as single alleles enable species determination, and outbreaks for the rapid identification of clusters.

  20. Stability improvement of induction motor based on stator parameter identification scheme

    Science.gov (United States)

    Kang, Shanlin; Kang, Yuzhe; Chen, Jingwei

    2008-10-01

    A new method for stator resistance identification based on wavelet network is presented to improve the operating performance of induction motor. The ripple of the torque is kept constant, resulting in a variable switching frequency, which depends on the tolerance band of the control. Due to wavelet transform behaving good localization property in both time and frequency space and multi-scale property, the wavelet function is adopted as the basic function of neural network. The current error and the change in the current error are the inputs of the wavelet network and the stator resistance error is the output of the wavelet network. The network parameters are initialized by the improved least squares algorithm. The parameters of wavelet network are tuned online to approximate the unknown nonlinear model with an appropriately chosen adaptive mechanism. The proposed method is proved to be efficient to reduce the torque ripple and current ripple by detailed comparison simulation results.

  1. Induction

    DEFF Research Database (Denmark)

    Sprogøe, Jonas; Elkjaer, Bente

    2010-01-01

    The purpose of this paper is to explore how induction of newcomers can be understood as both organizational renewal and the maintenance of status quo, and to develop ways of describing this in terms of learning.......The purpose of this paper is to explore how induction of newcomers can be understood as both organizational renewal and the maintenance of status quo, and to develop ways of describing this in terms of learning....

  2. Rapid Induction of Lipid Droplets in Chlamydomonas reinhardtii and Chlorella vulgaris by Brefeldin A

    Science.gov (United States)

    Ko, Donghwi; Yamaoka, Yasuyo; Otsuru, Masumi; Kawai-Yamada, Maki; Ishikawa, Toshiki; Oh, Hee-Mock; Nishida, Ikuo; Li-Beisson, Yonghua; Lee, Youngsook

    2013-01-01

    Algal lipids are the focus of intensive research because they are potential sources of biodiesel. However, most algae produce neutral lipids only under stress conditions. Here, we report that treatment with Brefeldin A (BFA), a chemical inducer of ER stress, rapidly triggers lipid droplet (LD) formation in two different microalgal species, Chlamydomonas reinhardtii and Chlorella vulgaris. LD staining using Nile red revealed that BFA-treated algal cells exhibited many more fluorescent bodies than control cells. Lipid analyses based on thin layer chromatography and gas chromatography revealed that the additional lipids formed upon BFA treatment were mainly triacylglycerols (TAGs). The increase in TAG accumulation was accompanied by a decrease in the betaine lipid diacylglyceryl N,N,N-trimethylhomoserine (DGTS), a major component of the extraplastidic membrane lipids in Chlamydomonas, suggesting that at least some of the TAGs were assembled from the degradation products of membrane lipids. Interestingly, BFA induced TAG accumulation in the Chlamydomonas cells regardless of the presence or absence of an acetate or nitrogen source in the medium. This effect of BFA in Chlamydomonas cells seems to be due to BFA-induced ER stress, as supported by the induction of three homologs of ER stress marker genes by the drug. Together, these results suggest that ER stress rapidly triggers TAG accumulation in two green microalgae, C. reinhardtii and C. vulgaris. A further investigation of the link between ER stress and TAG synthesis may yield an efficient means of producing biofuel from algae. PMID:24349166

  3. Rapid determination of uranium isotopes in urine by inductively coupled plasma-mass spectrometry.

    Science.gov (United States)

    Shi, Y; Dai, X; Collins, R; Kramer-Tremblay, S

    2011-08-01

    Following a radiological or nuclear emergency involving uranium exposure, rapid analytical methods are needed to analyze the concentration of uranium isotopes in human urine samples for early dose assessment. The inductively coupled plasma mass spectrometry (ICP-MS) technique, with its high sample throughput and high sensitivity, has advantages over alpha spectrometry for uranium urinalysis after minimum sample preparation. In this work, a rapid sample preparation method using an anion exchange chromatographic column was developed to separate uranium from the urine matrix. A high-resolution sector field ICP-MS instrument, coupled with a high sensitivity desolvation sample introduction inlet, was used to determine uranium isotopes in the samples. The method can analyze up to 24 urine samples in two hours with the limits of detection of 0.0014, 0.10, and 2.0 pg mL(-1) for (234)U, (235)U, and (238)U, respectively, which meet the requirement for isotopic analysis of uranium in a radiation emergency.

  4. Rapid induction of lipid droplets in Chlamydomonas reinhardtii and Chlorella vulgaris by Brefeldin A.

    Directory of Open Access Journals (Sweden)

    Sangwoo Kim

    Full Text Available Algal lipids are the focus of intensive research because they are potential sources of biodiesel. However, most algae produce neutral lipids only under stress conditions. Here, we report that treatment with Brefeldin A (BFA, a chemical inducer of ER stress, rapidly triggers lipid droplet (LD formation in two different microalgal species, Chlamydomonas reinhardtii and Chlorella vulgaris. LD staining using Nile red revealed that BFA-treated algal cells exhibited many more fluorescent bodies than control cells. Lipid analyses based on thin layer chromatography and gas chromatography revealed that the additional lipids formed upon BFA treatment were mainly triacylglycerols (TAGs. The increase in TAG accumulation was accompanied by a decrease in the betaine lipid diacylglyceryl N,N,N-trimethylhomoserine (DGTS, a major component of the extraplastidic membrane lipids in Chlamydomonas, suggesting that at least some of the TAGs were assembled from the degradation products of membrane lipids. Interestingly, BFA induced TAG accumulation in the Chlamydomonas cells regardless of the presence or absence of an acetate or nitrogen source in the medium. This effect of BFA in Chlamydomonas cells seems to be due to BFA-induced ER stress, as supported by the induction of three homologs of ER stress marker genes by the drug. Together, these results suggest that ER stress rapidly triggers TAG accumulation in two green microalgae, C. reinhardtii and C. vulgaris. A further investigation of the link between ER stress and TAG synthesis may yield an efficient means of producing biofuel from algae.

  5. Intubation conditions after rocuronium or succinylcholine for rapid sequence induction with alfentanil and propofol in the emergency patient

    DEFF Research Database (Denmark)

    Larsen, P B; Hansen, E G; Jacobsen, L S

    2005-01-01

    conditions of standard doses of rocuronium 0.6 mg kg[-1] and succinylcholine 1.0 mg kg[-1] during a strict rapid-sequence induction regimen including propofol and alfentanil. Methods: Male and female patients (ASA I-III) older than 17 yr scheduled for emergency abdominal or gynaecological surgery...... not fulfil the inclusion criteria. Clinically acceptable intubation conditions were present in 93.5% and 96.1% of patients in the succinylcholine group (n=107) and the rocuronium group (n=102), respectively (P=0.59). Conclusions: During a rapid-sequence induction with alfentanil and propofol, both rocuronium...

  6. Electrical conductivity of the deep mantle: Joint inversion approach based on EM induction by external sources and rapid changes of secular variation

    Science.gov (United States)

    Velímský, Jakub

    2010-05-01

    The basic idea of this study is to combine two different, previously established techniques to study the electrical conductivity of the Earth's deep mantle, into one joint inversion scheme. Both methods are based on time-domain integration of electromagnetic induction equation in the Earth's mantle with one-dimensional, depth-dependent electrical conductivity. In the first forward problem, external excitation by intense geomagnetic storms is assumed, while in the second forward problem, induction by rapid changes of secular variation of the main field at the core-mantle boundary (the geomagnetic jerks) is studied. Different time scales of both approaches lead to use of two distinct datasets. Seven years of CHAMP satellite data is processed into time series of spherical harmonic coefficients with 1 hr sampling rate and used in the external induction problem. Annual means provided by Intermagnet observatories for selected 20th century jerks, are used in the modelling of secular variation. The joint inversion aims to recover both the radial profile of mantle conductivity, and the unknown spatial structure of the secular acceleration at the CMB for each jerk. Limited-memory quasi-Newton technique is used to minimize the misfit, complemented by effective evaluation of data sensitivities based on solutions of adjoint problems. First results of the inversion suggest only small increase of electrical conductivity to values about 10 S/m in D".

  7. Intubating conditions following rapid sequence induction with three doses of succinylcholine

    Science.gov (United States)

    Prakash, Smita; Barde, Sushma; Thakur, Preeti; Gogia, Anoop Raj; Singh, Rajvir

    2012-01-01

    Background: The aim of this prospective, randomized, double-blind study was to compare tracheal intubating conditions and the duration of apnoea following administration of 0.4, 0.6 and 1.0 mg/kg of succinylcholine during simulated rapid sequence induction of anaesthesia. Methods: Anaesthesia was induced with fentanyl 2 μg/kg and propofol 2 mg/kg followed by application of cricoid pressure. Patients were randomly allocated to three groups according to the dose of succinylcholine administered (0.4, 0.6 or 1.0 mg/kg). Intubating conditions were assessed at 60 s after succinylcholine administration. Time to first diaphragmatic contraction (apnoea time) and time to resumption of regular spontaneous breathing were noted. Results: Excellent intubating conditions were obtained in 52.4%, 95.7% and 100% of the patients after 0.4, 0.6 and 1.0 mg/kg succinylcholine, respectively; P<0.001. Acceptable intubating conditions (excellent and good grade combined) were obtained in 66.7%, 100% and 100% of the patients after 0.4, 0.6 and 1.0 mg/ kg succinylcholine, respectively; P<0.001. Apnoea time and resumption of regular spontaneous breathing were dose-dependent. Apnoea time was 3.8±1.1 min, 4.3±0.9 min and 8.2±3.4 min in groups 0.4, 0.6 and 1.0 mg/kg, respectively; P<0.001. Time to regular spontaneous breathing was 5.3±1.2 min, 5.5±1.1 min and 8.9±3.5 min in groups 0.4, 0.6 and 1.0 mg/kg, respectively; P<0.001. Conclusion: A dose of 0.6 mg/kg succinylcholine can be used for rapid sequence induction of anaesthesia as it provides acceptable intubating conditions with a shorter apnoea time compared with a dose of 1 mg/kg. PMID:22701204

  8. Intubating conditions following rapid sequence induction with three doses of succinylcholine

    Directory of Open Access Journals (Sweden)

    Smita Prakash

    2012-01-01

    Full Text Available Background: The aim of this prospective, randomized, double-blind study was to compare tracheal intubating conditions and the duration of apnoea following administration of 0.4, 0.6 and 1.0 mg/kg of succinylcholine during simulated rapid sequence induction of anaesthesia. Methods: Anaesthesia was induced with fentanyl 2 μg/kg and propofol 2 mg/kg followed by application of cricoid pressure. Patients were randomly allocated to three groups according to the dose of succinylcholine administered (0.4, 0.6 or 1.0 mg/kg. Intubating conditions were assessed at 60 s after succinylcholine administration. Time to first diaphragmatic contraction (apnoea time and time to resumption of regular spontaneous breathing were noted. Results: Excellent intubating conditions were obtained in 52.4%, 95.7% and 100% of the patients after 0.4, 0.6 and 1.0 mg/kg succinylcholine, respectively; P<0.001. Acceptable intubating conditions (excellent and good grade combined were obtained in 66.7%, 100% and 100% of the patients after 0.4, 0.6 and 1.0 mg/ kg succinylcholine, respectively; P<0.001. Apnoea time and resumption of regular spontaneous breathing were dose-dependent. Apnoea time was 3.8±1.1 min, 4.3±0.9 min and 8.2±3.4 min in groups 0.4, 0.6 and 1.0 mg/kg, respectively; P<0.001. Time to regular spontaneous breathing was 5.3±1.2 min, 5.5±1.1 min and 8.9±3.5 min in groups 0.4, 0.6 and 1.0 mg/kg, respectively; P<0.001. Conclusion: A dose of 0.6 mg/kg succinylcholine can be used for rapid sequence induction of anaesthesia as it provides acceptable intubating conditions with a shorter apnoea time compared with a dose of 1 mg/kg.

  9. Intubation conditions after rocuronium or succinylcholine for rapid sequence induction with alfentanil and propofol in the emergency patient

    DEFF Research Database (Denmark)

    Larsen, P B; Hansen, E G; Jacobsen, L S

    2005-01-01

    conditions of standard doses of rocuronium 0.6 mg kg[-1] and succinylcholine 1.0 mg kg[-1] during a strict rapid-sequence induction regimen including propofol and alfentanil. Methods: Male and female patients (ASA I-III) older than 17 yr scheduled for emergency abdominal or gynaecological surgery...

  10. Intubation conditions after rocuronium or succinylcholine for rapid sequence induction with alfentanil and propofol in the emergency patient

    DEFF Research Database (Denmark)

    Larsen, P B; Hansen, E G; Jacobsen, L S

    2005-01-01

    and with increased risk of pulmonary aspiration of gastric content were randomized to a rapid-sequence induction with succinylcholine 1.0 mg kg[-1] or rocuronium 0.6 mg kg[-1]. Patients with a predicted difficult airway were excluded. A senior anaesthesiologist 'blinded' for the randomization performed...

  11. A novel transient rotor current control scheme of a doubly-fed induction generator equipped with superconducting magnetic energy storage for voltage and frequency support

    Science.gov (United States)

    Shen, Yang-Wu; Ke, De-Ping; Sun, Yuan-Zhang; Daniel, Kirschen; Wang, Yi-Shen; Hu, Yuan-Chao

    2015-07-01

    A novel transient rotor current control scheme is proposed in this paper for a doubly-fed induction generator (DFIG) equipped with a superconducting magnetic energy storage (SMES) device to enhance its transient voltage and frequency support capacity during grid faults. The SMES connected to the DC-link capacitor of the DFIG is controlled to regulate the transient dc-link voltage so that the whole capacity of the grid side converter (GSC) is dedicated to injecting reactive power to the grid for the transient voltage support. However, the rotor-side converter (RSC) has different control tasks for different periods of the grid fault. Firstly, for Period I, the RSC injects the demagnetizing current to ensure the controllability of the rotor voltage. Then, since the dc stator flux degenerates rapidly in Period II, the required demagnetizing current is low in Period II and the RSC uses the spare capacity to additionally generate the reactive (priority) and active current so that the transient voltage capability is corroborated and the DFIG also positively responds to the system frequency dynamic at the earliest time. Finally, a small amount of demagnetizing current is provided after the fault clearance. Most of the RSC capacity is used to inject the active current to further support the frequency recovery of the system. Simulations are carried out on a simple power system with a wind farm. Comparisons with other commonly used control methods are performed to validate the proposed control method. Project supported by the National Natural Science Foundation of China (Grant No. 51307124) and the Major Program of the National Natural Science Foundation of China (Grant No. 51190105).

  12. A new rapid kindling variant for induction of cortical epileptogenesis in freely moving rats

    Directory of Open Access Journals (Sweden)

    Juan Carlos Morales

    2014-07-01

    Full Text Available Kindling, one of the most used models of experimental epilepsy is based on daily electrical stimulation in several brain structures. Unlike the classic or slow kindling protocols (SK, the rapid kindling types (RK described until now require continuous stimulation at suprathreshold intensities applied directly to the same brain structure used for subsequent electrophysiological and inmunohistochemical studies, usually the hippocampus. However, the cellular changes observed in these rapid protocols, such as astrogliosis and neuronal loss, could be due to experimental manipulation more than to epileptogenesis-related alterations. Here, we developed a new RK protocol in order to generate an improved model of temporal lobe epilepsy (TLE which allows gradual progression of the epilepsy as well as obtaining an epileptic hippocampus, thus avoiding direct surgical manipulation and electric stimulation over this structure. This new protocol consists of basolateral amygdala (BLA stimulation with 10 trains of biphasic pulses (10s;50Hz per day with 20 minutes-intervals, during 3 consecutive days, using a subconvulsive and subthreshold intensity, which guarantees tissue integrity. The progression of epileptic activity was evaluated in freely moving rats through EEG recordings from cortex and amygdala, accompanied with synchronized video recordings. Moreover, we assessed the effectiveness of RK protocol and the establishment of epilepsy by evaluating cellular alterations of hippocampal slices from kindled rats. RK protocol induced convulsive states similar to SK protocols but in 3 days, with persistently lowered threshold to seizure induction and epileptogenic-dependent cellular changes in amygdala projection areas. We concluded that this novel RK protocol introduces a new variant of the chronic epileptogenesis models in freely moving rats, which is faster, highly reproducible and causes minimum cell damage with respect to that observed in other experimental

  13. An MLSA-based online scheme for the rapid identification of Stenotrophomonas isolates

    Directory of Open Access Journals (Sweden)

    Patrícia Locosque Ramos

    2011-06-01

    Full Text Available An online scheme to assign Stenotrophomonas isolates to genomic groups was developed using the multilocus sequence analysis (MLSA, which is based on the DNA sequencing of selected fragments of the housekeeping genes ATP synthase alpha subunit (atpA, the recombination repair protein (recA, the RNA polymerase alpha subunit (rpoA and the excision repair beta subunit (uvrB. This MLSA-based scheme was validated using eight of the 10 Stenotrophomonas species that have been previously described. The environmental and nosocomial Stenotrophomonas strains were characterised using MLSA, 16S rRNA sequencing and DNA-DNA hybridisation (DDH analyses. Strains of the same species were found to have greater than 95% concatenated sequence similarity and specific strains formed cohesive readily recognisable phylogenetic groups. Therefore, MLSA appeared to be an effective alternative methodology to amplified fragment length polymorphism fingerprint and DDH techniques. Strains of Stenotrophomonas can be readily assigned through the open database resource that was developed in the current study (www.steno.lncc.br/.

  14. Effect of Intensive Physician Oversight on a Prehospital Rapid Sequence Induction Program

    Science.gov (United States)

    Cushman, Jeremy T.; Hettinger, A. Zachary; Farney, Aaron; Shah, Manish N.

    2010-01-01

    Objective To examine the effects of adding close concurrent and retrospective physician oversight, consistent with NAEMSP recommendations, to an existing regional prehospital rapid sequence induction (RSI) program. Methods This study involved a retrospective cohort of patients receiving RSI between January 1st, 2004 and July 31st, 2008. On January 1st, 2007 an updated program including additional concurrent and retrospective physician oversight, increased RSI specific continuing medical education, and cadaver lab training was implemented. Study patients were divided into pre- (1) and post- (2) intervention groups based on date of medical care. Data regarding baseline characteristics, airway management, medication usage, and performance factors were compared between groups. A retrospective review by two EMS physicians assessed if the RSI was “clearly indicated” based on a predetermined set of criteria Results There were 109 RSIs performed in Group 1, and 54 in Group 2. Absolute increases in the use of both BLS (5%, p=0.02) and ALS (41%, p=0.001) airway techniques were observed. Increases in post-intubation administration of midazolam (30%, p=0.001) and morphine (24%, p=0.001), and decrease for vecuronium (−28%, p=0.001) were observed. The intubation success rate (92 vs. 94%) and frequency of recognized esophageal ETT placement (5 vs. 6%) were not statistically different. The number of unrecognized esophageal ETT placements remained zero. Physician chart review demonstrated an absolute increase in “clearly indicated” RSIs (17%, p=0.013). Conclusions Close concurrent and retrospective physician oversight consistent with recommendations from the National Association of EMS Physicians is associated with improved cognitive skills in paramedics, including appropriate patient selection for RSI. Further research is warranted to validate this model and optimize where resources are best used to enhance patient safety and improve clinical management for this

  15. Implementation of suitable flow injection/sequential-sample separation/preconcentration schemes for determination of trace metal concentrations using detection by electrothermal atomic absorption spectrometry and inductively coupled plasma mass spectrometry

    DEFF Research Database (Denmark)

    Hansen, Elo Harald; Wang, Jianhua

    2002-01-01

    Various preconditioning procedures encomprising appropriate separation/preconcentration schemes in order to obtain optimal sensitivity and selectivity characteristics when using electrothermal atomic absorption spectrometry (ETAAS) and inductively coupled plasma mass spectrometry (ICPMS...

  16. Voluntary hyperventilation before a rapid-sequence induction of anesthesia does not decrease postintubation PaCO2.

    Science.gov (United States)

    Choinière, A; Girard, F; Boudreault, D; Ruel, M; Girard, D C

    2001-11-01

    To prevent hypercapnia, voluntary hyperventilation is recommended for patients with increased intracranial pressure before the induction of general anesthesia. We sought to determine whether this maneuver results in a lower PaCO2 than breathing 3 min of oxygen 100% by face mask (preoxygenation) after intubation. Thirty patients requiring general anesthesia were randomly assigned to breathe either 3 min of oxygen 100% by face mask (Group P) or 1 min of oxygen 100% followed by 2 min of voluntary hyperventilation with oxygen 100% (Group H). All patients received a standard rapid-sequence induction of anesthesia followed by a 90-s period of apnea. Patients were then tracheally intubated and mechanically ventilated. Five arterial blood gas samples were taken: with room air, after preoxygenation or hyperventilation, after 60 and 90 s of apnea, and after tracheal intubation. Voluntary hyperventilation decreased PaCO2 before rapid-sequence induction (hyperventilation, 30.0 +/- 3.5 mm Hg versus preoxygenation, 37.9 +/- 5.2 mm Hg; P hyperventilation, 36.1 +/- 3.3 mm Hg versus preoxygenation, 35.6 +/- 3.4 mm Hg; P = 0.673), and no benefit was found after intubation (hyperventilation, 40.5 +/- 3.9 mm Hg versus preoxygenation, 41.4 +/- 2.7 mm Hg; P = 0.603). We conclude that voluntary hyperventilation before rapid-sequence induction does not provide protection against potential hypercapnia during intubation. Voluntary hyperventilation before anesthesia induction is recommended for patients with increased intracranial pressure to prevent hypercapnia. This randomized, prospective study demonstrated that this maneuver does not result in a lower postintubation PaCO2 than standard preoxygenation.

  17. Intubation conditions after rocuronium or succinylcholine for rapid sequence induction with alfentanil and propofol in the emergency patient

    DEFF Research Database (Denmark)

    Larsen, P B; Hansen, E G; Jacobsen, L S

    2005-01-01

    the intubation 60 s after injection of the neuromuscular blocker. Intubating conditions were evaluated according to an established guideline. Tracheal intubation not completed within 30 s was recorded as failed. Results: 222 patients were randomized. Three patients had their operation cancelled and 10 did......Background and objective: Previous studies mainly conducted on elective patients recommend doses of 0.9-1.2 mg kg[-1] rocuronium to obtain comparable intubation conditions with succinylcholine 1.0 mg kg[-1] after 60 s during a rapid-sequence induction. We decided to compare the overall intubating...... conditions of standard doses of rocuronium 0.6 mg kg[-1] and succinylcholine 1.0 mg kg[-1] during a strict rapid-sequence induction regimen including propofol and alfentanil. Methods: Male and female patients (ASA I-III) older than 17 yr scheduled for emergency abdominal or gynaecological surgery...

  18. A Simple Sensorless Scheme for Induction Motor Drives Fed by a Matrix Converter Using Constant Air-Gap Flux and PQR Transformation

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Lee, Kyo Beum

    2007-01-01

    This paper presents a new and simple method for sensorless operation of matrix converter drives using a constant air-gap flux and the imaginary power flowing to the motor. To improve low-speed sensorless performance, the non-linearities of a matrix converter drive such as commutation delays, turn......-on and turn-off times of switching devices, and on-state switching device voltage drop are modeled using PQR transformation and compensated using a reference current control scheme. The proposed compensation method is applied for high performance induction motor drives using a 3 kW matrix converter system...

  19. Design of a Three-Phase Statcom-Based Inductive Static VAR Compensator Using DC Capacitor Voltage Control Scheme

    OpenAIRE

    Abdulkareem Mokif Obais; Jagadeesh Pasupuleti

    2013-01-01

    In this study, a three-phase continuously controlled harmonic-free inductive static VAR compensator is presented. The compensator is built of a three-phase voltage source inverter based statcom. The phase currents of this compensator are linearly and continuously controlled by the statcom DC capacitor voltage. The control strategy is outlined by a process of forcing the capacitor voltage to follow a certain reference voltage which can be varied linearly from its maximum to its minimum values ...

  20. Vasoactive intestinal polypeptide excites medial pontine reticular formation neurons in the brainstem rapid eye movement sleep-induction zone

    DEFF Research Database (Denmark)

    Kohlmeier, Kristi Anne; Reiner, P B

    1999-01-01

    Although it has long been known that microinjection of the cholinergic agonist carbachol into the medial pontine reticular formation (mPRF) induces a state that resembles rapid eye movement (REM) sleep, it is likely that other transmitters contribute to mPRF regulation of behavioral states. A key...... conclude that VIP excites mPRF neurons by activation of a sodium current. This effect is mediated at least in part by G-protein stimulation of adenylyl cyclase, cAMP, and protein kinase A. These data suggest that VIP may play a physiological role in REM induction by its actions on mPRF neurons....

  1. Inductively coupled plasma-atomic emission spectroscopy: a computer controlled, scanning monochromator system for the rapid determination of the elements

    Energy Technology Data Exchange (ETDEWEB)

    Floyd, M.A.

    1980-03-01

    A computer controlled, scanning monochromator system specifically designed for the rapid, sequential determination of the elements is described. The monochromator is combined with an inductively coupled plasma excitation source so that elements at major, minor, trace, and ultratrace levels may be determined, in sequence, without changing experimental parameters other than the spectral line observed. A number of distinctive features not found in previously described versions are incorporated into the system here described. Performance characteristics of the entire system and several analytical applications are discussed.

  2. Double layer resist process scheme for metal lift-off with application in inductive heating of microstructures

    DEFF Research Database (Denmark)

    Ouattara, Lassana; Knutzen, Michael; Keller, Stephan Urs

    2010-01-01

    We present a new method to define metal electrodes on top of high-aspect-ratio microstructures using standard photolithography equipment and a single chromium mask. A lift-off resist (LOR) layer is implemented in an SU-8 photolithography process to selectively remove metal at the end of the proce...... of the processing. In this way, we have successfully defined metal electrodes on top of 75 mu m high SU-8 microstructures to be used as test structures for the measurement of temperature increase due to inductive heating....

  3. Rapid nanocrystallization of soft-magnetic amorphous alloys using microwave induction heating

    Energy Technology Data Exchange (ETDEWEB)

    Nicula, R. [Swiss Federal Laboratories for Materials Testing and Research - Empa, Feuerwerkerstr. 39, CH-3602 Thun (Switzerland)], E-mail: radu.nicula@empa.ch; Stir, M.; Ishizaki, K. [Swiss Federal Laboratories for Materials Testing and Research - Empa, Feuerwerkerstr. 39, CH-3602 Thun (Switzerland); Catala-Civera, J.-M. [Polytechnical University of Valencia, School of Telecommunication, Camino de Vera s/n, E-46022 Valencia (Spain); Vaucher, S. [Swiss Federal Laboratories for Materials Testing and Research - Empa, Feuerwerkerstr. 39, CH-3602 Thun (Switzerland)

    2009-01-15

    The crystallization of Fe{sub 73}Nb{sub 3}Cu{sub 1}Si{sub 16}B{sub 7} alloy during microwave heating was investigated in situ using synchrotron radiation powder diffraction. The phase transformation comprises a primary nanocrystallization stage and a final microcrystallization step. We provide evidence for a strong enhancement of the transformation kinetics. Microwave heating occurs as a result of both ohmic and magnetic losses induced by eddy currents, which defines a volumetric microwave induction heating process. Nanocrystallization is completed within 5 s, while full crystallization is achieved in less than 10 s.

  4. Rapid induction of neutrophil-endothelial adhesion by endothelial complement fixation.

    Science.gov (United States)

    Marks, R M; Todd, R F; Ward, P A

    1989-05-25

    The adhesion of neutrophils to vascular endothelium is an early event in their recruitment into acute inflammatory lesions. In evaluating potential neutrophil-endothelial adhesive mechanisms in acute inflammation, important considerations are that adhesion in vivo may occur very rapidly following injury and that the specificity of the reaction resides in altered endothelium. That is, neutrophils adhere only to altered endothelium adjacent to an inflammatory focus, rather than at random as would be expected if activation of neutrophils were the initiator of adhesion. We have explored a possible bridging role for complement in causing early neutrophil-endothelial cell adhesion. The complement system is involved in inflammatory processes, is capable of rapid amplification, and endothelial complement fixation at sites of inflammation could generate an endothelium-restricted signal for neutrophil adhesion. We have now developed a model in which this can be investigated without complicating factors such as immunoglobulin deposition, by constructing a novel molecule, a hybrid of the endothelial binding lectin Ulex europaeus I and of the complement activator cobra venom factor. This molecule has the capacity to cause fixation of complement on human umbilical vein endothelial cells. We show that complement fixation is a potent and rapid stimulus for neutrophil adhesion. Neutrophil adhesion requires only endothelial deposition of C3, and is mediated through the type 3 complement receptor.

  5. A Novel Rat Model of Vitamin D Deficiency: Safe and Rapid Induction of Vitamin D and Calcitriol Deficiency without Hyperparathyroidism

    Directory of Open Access Journals (Sweden)

    Andrea W. D. Stavenuiter

    2015-01-01

    Full Text Available Vitamin D deficiency is associated with a range of clinical disorders. To study the mechanisms involved and improve treatments, animal models are tremendously useful. Current vitamin D deficient rat models have important practical limitations, including time requirements when using, exclusively, a vitamin D deficient diet. More importantly, induction of hypovitaminosis D causes significant fluctuations in parathyroid hormone (PTH and mineral levels, complicating the interpretation of study results. To overcome these shortcomings, we report the successful induction of vitamin D deficiency within three weeks, with stable serum PTH and minerals levels, in Wistar rats. We incorporated two additional manoeuvres compared to a conventional diet. Firstly, the vitamin D depleted diet is calcium (Ca enriched, to attenuate the development of secondary hyperparathyroidism. Secondly, six intraperitoneal injections of paricalcitol during the first two weeks are given to induce the rapid degradation of circulating vitamin D metabolites. After three weeks, serum 25-hydroxyvitamin D3 (25D and 1,25-dihydroxyvitamin D3 (1,25D levels had dropped below detection limits, with unchanged serum PTH, Ca, and phosphate (P levels. Therefore, this model provides a useful tool to examine the sole effect of hypovitaminosis D, in a wide range of research settings, without confounding changes in PTH, Ca, and P.

  6. A novel rat model of vitamin D deficiency: safe and rapid induction of vitamin D and calcitriol deficiency without hyperparathyroidism.

    Science.gov (United States)

    Stavenuiter, Andrea W D; Arcidiacono, Maria Vittoria; Ferrantelli, Evelina; Keuning, Eelco D; Vila Cuenca, Marc; ter Wee, Piet M; Beelen, Robert H J; Vervloet, Marc G; Dusso, Adriana S

    2015-01-01

    Vitamin D deficiency is associated with a range of clinical disorders. To study the mechanisms involved and improve treatments, animal models are tremendously useful. Current vitamin D deficient rat models have important practical limitations, including time requirements when using, exclusively, a vitamin D deficient diet. More importantly, induction of hypovitaminosis D causes significant fluctuations in parathyroid hormone (PTH) and mineral levels, complicating the interpretation of study results. To overcome these shortcomings, we report the successful induction of vitamin D deficiency within three weeks, with stable serum PTH and minerals levels, in Wistar rats. We incorporated two additional manoeuvres compared to a conventional diet. Firstly, the vitamin D depleted diet is calcium (Ca) enriched, to attenuate the development of secondary hyperparathyroidism. Secondly, six intraperitoneal injections of paricalcitol during the first two weeks are given to induce the rapid degradation of circulating vitamin D metabolites. After three weeks, serum 25-hydroxyvitamin D3 (25D) and 1,25-dihydroxyvitamin D3 (1,25D) levels had dropped below detection limits, with unchanged serum PTH, Ca, and phosphate (P) levels. Therefore, this model provides a useful tool to examine the sole effect of hypovitaminosis D, in a wide range of research settings, without confounding changes in PTH, Ca, and P.

  7. Rapid Access to β-Trifluoromethyl-Substituted Ketones: Harnessing Inductive Effects in Wacker-Type Oxidations of Internal Alkenes

    KAUST Repository

    Lerch, Michael M.

    2014-07-18

    We present a practical trifluoromethyl-directed Wacker-type oxidation of internal alkenes that enables rapid access to β-trifluoromethyl-substituted ketones. Allylic trifluoromethyl-substituted alkenes bearing a wide range of functional groups can be oxidized in high yield and regioselectivity. The distance dependence of the regioselectivity was established by systematic variation of the number of methylene units between the double bond and the trifluoromethyl group. The regioselectivity enforced by traditional directing groups could even be reversed by introduction of a competing trifluoromethyl group. Besides being a new powerful synthetic method to prepare fluorinated molecules, this work directly probes the role of inductive effects on nucleopalladation events. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. A synthetic small molecule for rapid induction of multiple pluripotency genes in mouse embryonic fibroblasts

    Science.gov (United States)

    Pandian, Ganesh N.; Nakano, Yusuke; Sato, Shinsuke; Morinaga, Hironobu; Bando, Toshikazu; Nagase, Hiroki; Sugiyama, Hiroshi

    2012-07-01

    Cellular reprogramming involves profound alterations in genome-wide gene expression that is precisely controlled by a hypothetical epigenetic code. Small molecules have been shown to artificially induce epigenetic modifications in a sequence independent manner. Recently, we showed that specific DNA binding hairpin pyrrole-imidazole polyamides (PIPs) could be conjugated with chromatin modifying histone deacetylase inhibitors like SAHA to epigenetically activate certain pluripotent genes in mouse fibroblasts. In our steadfast progress to improve the efficiency of SAHA-PIPs, we identified a novel compound termed, δ that could dramatically induce the endogenous expression of Oct-3/4 and Nanog. Genome-wide gene analysis suggests that in just 24 h and at nM concentration, δ induced multiple pluripotency-associated genes including Rex1 and Cdh1 by more than ten-fold. δ treated MEFs also rapidly overcame the rate-limiting step of epithelial transition in cellular reprogramming by switching ``'' the complex transcriptional gene network.

  9. Rapid induction of omega-3 fatty acids (EPA) in Nannochloropsis sp. by UV-C radiation.

    Science.gov (United States)

    Sharma, Kalpesh; Schenk, Peer M

    2015-06-01

    Omega-3 fatty acids, such as eicosapentaenoic acid (EPA), provide substantial health benefits. As global fish stocks are declining and in some cases are contaminated with heavy metals, there is a need to find more sustainable land-based sources of these essential fatty acids. The oleaginous microalga Nannochloropsis sp. has been identified as a highly efficient producer of omega-3 fatty acids. In this study, we present a new process to rapidly induce biosynthesis of essential fatty acids, including EPA in Nannochloropsis sp. BR2. Short exposure to UV-C at a dose of 100 or 250 mJ/cm(2) led to a significant increase in total cellular lipid contents when compared to mock-treated controls. A low dosage of 100 mJ/cm(2) also led to a twofold increase in total EPA content within 24 h that constituted 30% of total fatty acids and up to 12% of total dry weight at higher dosages. UV-C radiation may find uses as an easily applicable external inducer for large-scale production of omega-3 production from microalgae. © 2015 Wiley Periodicals, Inc.

  10. Rapid changes in key ruminal microbial populations during the induction of and recovery from diet-induced milk fat depression in dairy cows.

    Science.gov (United States)

    Rico, D E; Preston, S H; Risser, J M; Harvatine, K J

    2015-08-14

    The ruminant provides a powerful model for understanding the temporal dynamics of gastrointestinal microbial communities. Diet-induced milk fat depression (MFD) in the dairy cow is caused by rumen-derived bioactive fatty acids, and is commonly attributed to the changes in the microbial population. The aim of the present study was to determine the changes occurring in nine ruminal bacterial taxa with well-characterised functions, and abundance of total fungi, ciliate protozoa and bacteria during the induction of and recovery from MFD. Interactions between treatment and time were observed for ten of the twelve populations. The total number of both fungi and ciliate protozoa decreased rapidly (days 4 and 8, respectively) by more than 90% during the induction period and increased during the recovery period. The abundance of Streptococcus bovis (amylolytic) peaked at 350% of control levels on day 4 of induction and rapidly decreased during the recovery period. The abundance of Prevotella bryantii (amylolytic) decreased by 66% from day 8 to 20 of the induction period and increased to the control levels on day 12 of the recovery period. The abundance of Megasphaera elsdenii and Selenomonas ruminantium (lactate-utilising bacteria) increased progressively until day 12 of induction (>170%) and decreased during the recovery period. The abundance of Fibrobacter succinogenes (fibrolytic) decreased by 97% on day 4 of induction and increased progressively to an equal extent during the recovery period, although smaller changes were observed for other fibrolytic bacteria. The abundance of the Butyrivibrio fibrisolvens/Pseudobutyrivibrio group decreased progressively during the induction period and increased during the recovery period, whereas the abundance of Butyrivibrio hungatei was not affected by treatment. Responsive taxa were modified rapidly, with the majority of changes occurring within 8 d and their time course was similar to the time course of the induction of MFD

  11. HIV-1 Tat activates neuronal ryanodine receptors with rapid induction of the unfolded protein response and mitochondrial hyperpolarization.

    Directory of Open Access Journals (Sweden)

    John P Norman

    Full Text Available Neurologic disease caused by human immunodeficiency virus type 1 (HIV-1 is ultimately refractory to highly active antiretroviral therapy (HAART because of failure of complete virus eradication in the central nervous system (CNS, and disruption of normal neural signaling events by virally induced chronic neuroinflammation. We have previously reported that HIV-1 Tat can induce mitochondrial hyperpolarization in cortical neurons, thus compromising the ability of the neuron to buffer calcium and sustain energy production for normal synaptic communication. In this report, we demonstrate that Tat induces rapid loss of ER calcium mediated by the ryanodine receptor (RyR, followed by the unfolded protein response (UPR and pathologic dilatation of the ER in cortical neurons in vitro. RyR antagonism attenuated both Tat-mediated mitochondrial hyperpolarization and UPR induction. Delivery of Tat to murine CNS in vivo also leads to long-lasting pathologic ER dilatation and mitochondrial morphologic abnormalities. Finally, we performed ultrastructural studies that demonstrated mitochondria with abnormal morphology and dilated endoplasmic reticulum (ER in brain tissue of patients with HIV-1 inflammation and neurodegeneration. Collectively, these data suggest that abnormal RyR signaling mediates the neuronal UPR with failure of mitochondrial energy metabolism, and is a critical locus for the neuropathogenesis of HIV-1 in the CNS.

  12. Rapid induction of multiple resistance mechanisms in Aspergillus fumigatus during azole therapy: a case study and review of the literature.

    Science.gov (United States)

    Camps, Simone M T; van der Linden, Jan W M; Li, Yi; Kuijper, Ed J; van Dissel, Jaap T; Verweij, Paul E; Melchers, Willem J G

    2012-01-01

    Nine consecutive isogenic Aspergillus fumigatus isolates cultured from a patient with aspergilloma were investigated for azole resistance. The first cultured isolate showed a wild-type phenotype, but four azole-resistant phenotypes were observed in the subsequent eight isolates. Four mutations were found in the cyp51A gene of these isolates, leading to the substitutions A9T, G54E, P216L, and F219I. Only G54 substitutions were previously proved to be associated with azole resistance. Using a Cyp51A homology model and recombination experiments in which the mutations were introduced into a susceptible isolate, we show that the substitutions at codons P216 and F219 were both associated with resistance to itraconazole and posaconazole. A9T was also present in the wild-type isolate and thus considered a Cyp51A polymorphism. Isolates harboring F219I evolved further into a pan-azole-resistant phenotype, indicating an additional acquisition of a non-Cyp51A-mediated resistance mechanism. Review of the literature showed that in patients who develop azole resistance during therapy, multiple resistance mechanisms commonly emerge. Furthermore, the median time between the last cultured wild-type isolate and the first azole-resistant isolate was 4 months (range, 3 weeks to 23 months), indicating a rapid induction of resistance.

  13. Rapid Induction of Multiple Terpenoid Groups by Ponderosa Pine in Response to Bark Beetle-Associated Fungi.

    Science.gov (United States)

    Keefover-Ring, Ken; Trowbridge, Amy; Mason, Charles J; Raffa, Kenneth F

    2016-01-01

    Ponderosa pine (Pinus ponderosa) is a major and widely distributed component of conifer biomes in western North America and provides substantial ecological and economic benefits. This tree is exposed to several tree-killing bark beetle-microbial complexes, including the mountain pine beetle (Dendroctonus ponderosae) and the phytopathogenic fungus Grosmannia clavigera that it vectors, which are among the most important. Induced responses play a crucial role in conifer defenses, yet these have not been reported in ponderosa pine. We compared concentrations of terpenes and a phenylpropanoid, two phytochemical classes with strong effects against bark beetles and their symbionts, in constitutive phloem tissue and in tissue following mechanical wounding or simulated D. ponderosae attack (mechanical wounding plus inoculation with G. clavigera). We also tested whether potential induced responses were localized or systemic. Ponderosa pines showed pronounced induced defenses to inoculation, increasing their total phloem concentrations of monoterpenes 22.3-fold, sesquiterpenes 56.7-fold, and diterpenes 34.8-fold within 17 days. In contrast, responses to mechanical wounding alone were only 5.2, 11.3, and 7.7-fold, respectively. Likewise, the phenylpropanoid estragole (4-allyanisole) rose to 19.1-fold constitutive levels after simulated attack but only 4.4-fold after mechanical wounding. Overall, we found no evidence of systemic induction after 17 days, which spans most of this herbivore's narrow peak attack period, as significant quantitative and compositional changes within and between terpenoid groups were localized to the wound site. Implications to the less frequent exploitation of ponderosa than lodgepole pine by D. ponderosae, and potential advantages of rapid localized over long-term systemic responses in this system, are discussed.

  14. Rapid annotation of anonymous sequences from genome projects using semantic similarities and a weighting scheme in gene ontology.

    Directory of Open Access Journals (Sweden)

    Paolo Fontana

    Full Text Available BACKGROUND: Large-scale sequencing projects have now become routine lab practice and this has led to the development of a new generation of tools involving function prediction methods, bringing the latter back to the fore. The advent of Gene Ontology, with its structured vocabulary and paradigm, has provided computational biologists with an appropriate means for this task. METHODOLOGY: We present here a novel method called ARGOT (Annotation Retrieval of Gene Ontology Terms that is able to process quickly thousands of sequences for functional inference. The tool exploits for the first time an integrated approach which combines clustering of GO terms, based on their semantic similarities, with a weighting scheme which assesses retrieved hits sharing a certain number of biological features with the sequence to be annotated. These hits may be obtained by different methods and in this work we have based ARGOT processing on BLAST results. CONCLUSIONS: The extensive benchmark involved 10,000 protein sequences, the complete S. cerevisiae genome and a small subset of proteins for purposes of comparison with other available tools. The algorithm was proven to outperform existing methods and to be suitable for function prediction of single proteins due to its high degree of sensitivity, specificity and coverage.

  15. Redundancy and molecular evolution: the rapid Induction of bone formation by the mammalian transforming growth factor-β3 isoform

    Directory of Open Access Journals (Sweden)

    Ugo Ripamonti

    2016-09-01

    Full Text Available The soluble osteogenic molecular signals of the transforming growth factor-β (TGF-β supergene family are the molecular bases of the induction of bone formation and postnatal bone tissue morphogenesis with translation into clinical contexts. The mammalian TGF-β3 isoform, a pleiotropic member of the family, controls a vast array of biological processes including the induction of bone formation. Recombinant hTGF-β3 induces substantial bone formation when implanted with either collagenous bone matrices or coral-derived macroporous bioreactors in the rectus abdominis muscle of the non-human primate Papio ursinus. In marked contrast, the three mammalian TGF-βs do not initiate the induction of bone formation in rodents and lagomorphs. The induction of bone by hTGF-β3/preloaded bioreactors is orchestrated by inducing fibrin-fibronectin rings that structurally organize tissue patterning and morphogenesis within the macroporous spaces. Induced advancing extracellular matrix rings provide the structural anchorage for hyper chromatic cells, interpreted as differentiating osteoblasts re-programmed by hTGF-β3 from invading myoblastic and/or pericytic differentiated cells. Runx2 and Osteocalcin expression are significantly up-regulated correlating to multiple invading cells differentiating into the osteoblastic phenotype. Bioreactors pre-loaded with recombinant human Noggin (hNoggin, a BMPs antagonist, show down-regulation of BMP-2 and other profiled osteogenic proteins’ genes resulting in minimal bone formation. Coral-derived macroporous constructs preloaded with binary applications of hTGF-β3 and hNoggin also show down-regulation of BMP-2 with the induction of limited bone formation. The induction of bone formation by hTGF-β3 is via the BMPs pathway and it is thus blocked by hNoggin. Our systematic studies in Papio ursinus with translational hTGF-β3 in large cranio-mandibulo-facial defects in humans are now requesting the re-evaluation of Bone

  16. Salivary glucose oxidase from caterpillars mediates the induction of rapid and delayed-induced defenses in the tomato plant.

    Directory of Open Access Journals (Sweden)

    Donglan Tian

    Full Text Available Caterpillars produce oral secretions that may serve as cues to elicit plant defenses, but in other cases these secretions have been shown to suppress plant defenses. Ongoing work in our laboratory has focused on the salivary secretions of the tomato fruitworm, Helicoverpa zea. In previous studies we have shown that saliva and its principal component glucose oxidase acts as an effector by suppressing defenses in tobacco. In this current study, we report that saliva elicits a burst of jasmonic acid (JA and the induction of late responding defense genes such as proteinase inhibitor 2 (Pin2. Transcripts encoding early response genes associated with the JA pathway were not affected by saliva. We also observed a delayed response to saliva with increased densities of Type VI glandular trichomes in newly emerged leaves. Proteomic analysis of saliva revealed glucose oxidase (GOX was the most abundant protein identified and we confirmed that it plays a primary role in the induction of defenses in tomato. These results suggest that the recognition of GOX in tomato may represent a case for effector-triggered immunity. Examination of saliva from other caterpillar species indicates that saliva from the noctuids Spodoptera exigua and Heliothis virescens also induced Pin2 transcripts.

  17. Salivary glucose oxidase from caterpillars mediates the induction of rapid and delayed-induced defenses in the tomato plant.

    Science.gov (United States)

    Tian, Donglan; Peiffer, Michelle; Shoemaker, Erica; Tooker, John; Haubruge, Eric; Francis, Frederic; Luthe, Dawn S; Felton, Gary W

    2012-01-01

    Caterpillars produce oral secretions that may serve as cues to elicit plant defenses, but in other cases these secretions have been shown to suppress plant defenses. Ongoing work in our laboratory has focused on the salivary secretions of the tomato fruitworm, Helicoverpa zea. In previous studies we have shown that saliva and its principal component glucose oxidase acts as an effector by suppressing defenses in tobacco. In this current study, we report that saliva elicits a burst of jasmonic acid (JA) and the induction of late responding defense genes such as proteinase inhibitor 2 (Pin2). Transcripts encoding early response genes associated with the JA pathway were not affected by saliva. We also observed a delayed response to saliva with increased densities of Type VI glandular trichomes in newly emerged leaves. Proteomic analysis of saliva revealed glucose oxidase (GOX) was the most abundant protein identified and we confirmed that it plays a primary role in the induction of defenses in tomato. These results suggest that the recognition of GOX in tomato may represent a case for effector-triggered immunity. Examination of saliva from other caterpillar species indicates that saliva from the noctuids Spodoptera exigua and Heliothis virescens also induced Pin2 transcripts.

  18. The Department of Veterans Affairs Nutritional Status Classification Scheme Allows for Rapid Assessment of Nutritional Status Prior to Autologous Peripheral Blood Stem Cell Transplantation and Identifies Patients at High Risk of Transplant-Related Complications

    National Research Council Canada - National Science Library

    Toro, Juan J; Haile, David J; Chao, Ju-Hsien; Schneider, Deanna; Jewell, Pamela S; Lee, Shuko; Freytes, César O

    2009-01-01

    ... of Veterans Affairs (VA) developed a Nutritional Status Classification Scheme (NSCS) to identify nutritionally compromised inpatients rapidly and reliably. The VA-NSCS takes into account a combination of body weight, routine laboratory tests, and clinical and dietary history. The VA-NSCS is routinely utilized for the nutritional evaluation ...

  19. NF-κB is activated in CD4+ iNKT cells by sickle cell disease and mediates rapid induction of adenosine A2A receptors.

    Directory of Open Access Journals (Sweden)

    Gene Lin

    Full Text Available Reperfusion injury following tissue ischemia occurs as a consequence of vaso-occlusion that is initiated by activation of invariant natural killer T (iNKT cells. Sickle cell disease (SDC results in widely disseminated microvascular ischemia and reperfusion injury as a result of vaso-occlusion by rigid and adhesive sickle red blood cells. In mice, iNKT cell activation requires NF-κB signaling and can be inhibited by the activation of anti-inflammatory adenosine A2A receptors (A2ARs. Human iNKT cells are divided into subsets of CD4+ and CD4- cells. In this study we found that human CD4+ iNKT cells, but not CD4- cells undergo rapid NF-κB activation (phosphorylation of NF-κB on p65 and induction of A2ARs (detected with a monoclonal antibody 7F6-G5-A2 during SCD painful vaso-occlusive crises. These findings indicate that SCD primarily activates the CD4+ subset of iNKT cells. Activation of NF-κB and induction of A2ARs is concordant, i.e. only CD4+ iNKT cells with activated NF-κB expressed high levels of A2ARs. iNKT cells that are not activated during pVOC express low levels of A2AR immunoreactivity. These finding suggest that A2AR transcription may be induced in CD4+ iNKT cells as a result of NF-κB activation in SCD. In order to test this hypothesis further we examined cultured human iNKT cells. In cultured cells, blockade of NF-κB with Bay 11-7082 or IKK inhibitor VII prevented rapid induction of A2AR mRNA and protein upon iNKT activation. In conclusion, NF-κB-mediated induction of A2ARs in iNKT cells may serve as a counter-regulatory mechanism to limit the extent and duration of inflammatory immune responses. As activated iNKT cells express high levels of A2ARs following their activation, they may become highly sensitive to inhibition by A2AR agonists.

  20. Rapid Induction Therapy with Oral Tacrolimus in Elderly Patients with Refractory Ulcerative Colitis Can Easily Lead to Elevated Tacrolimus Concentrations in Blood: A Report of 5 Cases.

    Science.gov (United States)

    Kawamura, Haruna; Matsumoto, Satohiro; Nakamura, Noriyuki; Miyatani, Hiroyuki; Mashima, Hirosato

    2017-04-15

    BACKGROUND Tacrolimus is reportedly effective for the treatment of refractory ulcerative colitis (UC). At our hospital, there has been an increase in the number of patients, including elderly patients, with refractory UC treated with tacrolimus. Here, we review the data from 5 patients with elderly-onset UC treated with tacrolimus as remission induction therapy. CASE REPORT The subjects were 5 patients ≥65 years of age with refractory UC who had received oral tacrolimus as remission induction therapy between 2009 and 2014 (3 men and 2 women; median age at onset, 75 years). At the start of the tacrolimus treatment, the median duration of disease was 3 months, and the type of UC was total colitis in 4 cases, and left-sided colitis in 1 case. The drugs used concomitantly at the start of tacrolimus treatment were mesalazine (5 cases) and an immunomodulator drug (1 case). Standard induction therapy (0.05 mg/kg/day) was used in 2 patients and rapid induction therapy (0.1 mg/kg/day) was used in the remaining 3 patients. One week after the start of treatment, the blood trough concentrations of tacrolimus were over the target level of 15 mg/mL in 4 patients. The clinical activity index values on day 0 and day 14 were 10.6±2.1 and 7.6±3.4, respectively. The ulcerative colitis endoscopic index of severity in the remaining 3 patients, after excluding the 2 patients who required colectomy within 14 days after the start of tacrolimus therapy, was 7.3±1.0 before the start of the tacrolimus treatment, improving to 4.5±0.5 on day 14. Subsequently, 1 of these 3 patients was also judged to need surgery due to symptom exacerbation, while complete remission was maintained in the other 2 patients. CONCLUSIONS In elderly-onset refractory UC patients, tacrolimus appears to be effective as remission induction therapy. However, since tacrolimus concentrations in the blood can rise easily in elderly patients, frequent monitoring of the drug concentrations and dosage adjustments are

  1. Research on Direct Torque Control of Induction Motor Based on TMS320LF2407A

    Science.gov (United States)

    Lufei, Xu; Guangqun, Nan

    The direct torque control of Induction Motor is one of the high performance control system, which was proposed after the vector control scheme. During the recent 20 years, It has been developed rapidly for its concise system scheme, excellent dynamic and static performances. DTC system directly controls the electromagnetic torque and stator flux, using the analyzing method of space vector and stator flux orientation. This paper establishes the mathematical model of direct torque control (DTC) system of induction motor, and direct torque control (DTC) scheme of induction motor based on TMS320LF2407A is introduced. The control scheme gets the switch control signal of inverter with the space voltage vector modulation technology. Finally the approach has been implemented on DSP in a 1.1 kW drive. The results show that the DTC with SVPWM has many merits such as simple realization, good running performance and high voltage utilization ratio.

  2. Method Development for Rapid Analysis of Natural Radioactive Nuclides Using Sector Field Inductively Coupled Plasma Mass Spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Lim, J.M.; Ji, Y.Y.; Lee, H.; Park, J.H.; Jang, M.; Chung, K.H.; Kang, M.J.; Choi, G.S. [Korea Atomic Energy Research Institute (Korea, Republic of)

    2014-07-01

    As an attempt to reduce the social costs and apprehension arising from radioactivity in the environment, an accurate and rapid assessment of radioactivity is highly desirable. Naturally occurring radioactive materials (NORM) are widely spread throughout the environment. The concern with radioactivity from these materials has therefore been growing for the last decade. In particular, radiation exposure in the industry when handling raw materials (e.g., coal mining and combustion, oil and gas production, metal mining and smelting, mineral sands (REE, Ti, Zr), fertilizer (phosphate), and building materials) has been brought to the public's attention. To decide the proper handling options, a rapid and accurate analytical method that can be used to evaluate the radioactivity of radionuclides (e.g., {sup 238}U, {sup 235}U, {sup 232}Th, {sup 226}Ra, and {sup 40}K) should be developed and validated. Direct measuring methods such as alpha spectrometry, a liquid scintillation counter (LSC), and mass-spectrometry are usually used for the measurement of radioactivity in NORM samples, and they encounter the most significant difficulties during pretreatment (e.g., purification, speciation, and dilution/enrichment). Since the pretreatment process consequently plays an important role in the measurement uncertainty, method development and validation should be performed. Furthermore, a-spectrometry has a major disadvantage of a long counting time, while it has a prominent measurement capability at a very low activity level of {sup 238}U, {sup 235}U, {sup 232}Th, and {sup 226}Ra. Contrary to the α-spectrometry method, a measurement technique using ICP-MS allow radioactivity in many samples to be measured in a short time period with a high degree of accuracy and precision. In this study, a method was developed for a rapid analysis of natural radioactive nuclides using ICP-MS. A sample digestion process was established using LiBO{sub 2} fusion and Fe co-precipitation. A magnetic

  3. Bead Injection Extraction Chromatography using High-capacity Lab-on-Valve as a Front End to Inductively Coupled Plasma Mass Spectrometry for Rapid Urine Radiobioassay

    DEFF Research Database (Denmark)

    Qiao, Jixin; Hou, Xiaolin; Roos, Per

    2013-01-01

    A novel bead injection (BI) extraction chromatographic microflow system exploiting high-capacity lab-on-valve (LOV) platform coupled with inductively coupled plasma mass spectrometric detection is developed for rapid and automated determination of plutonium in human urine. A microconduit (1 m......L) incorporated within the LOV processing unit is loaded on-line with a metered amount of disposable extraction chromatographic resin (up to 330 mg of TEVA) through programmable beads transport. Selective capture and purification of plutonium onto the resin beads is then performed by pressure driven flow after.......319 ± 0.004 g, n=5). The chemical yields of plutonium were averagely better than 90% under the optimal experimental conditions and the entire analytical procedure could be accomplished within a short timeframe (

  4. Transcriptome Signatures Reveal Rapid Induction of Immune-Responsive Genes in Human Memory CD8(+) T Cells.

    Science.gov (United States)

    Yang, Cheng; Khanniche, Asma; DiSpirito, Joanna R; Ji, Ping; Wang, Shujun; Wang, Ying; Shen, Hao

    2016-05-31

    Memory T cells (TM) play a prominent role in protection and auto-immunity due to their ability to mount a more effective response than naïve T cells (TN). However, the molecular mechanisms underlying enhanced functionality of TM are not well defined, particularly in human TM. We examined the global gene expression profiles of human CD8(+) TN and TM before and after stimulation. There were 1,284, 1,373 and 1,629 differentially expressed genes between TN and TM at 0 hr, 4 hr and 24 hr after stimulation, respectively, with more genes expressed to higher levels in TM. Genes rapidly up-regulated in TN cells were largely involved in nitrogen, nucleoside and amino acid metabolisms. In contrast, those in CD8(+) TM were significantly enriched for immune-response-associated processes, including cytokine production, lymphocyte activation and chemotaxis. Multiple cytokines were rapidly up-regulated in TM cells, including effector cytokines known to be produced by CD8(+) T cells and important for their functions, as well as regulatory cytokines, both pro- and anti-inflammatory, that are not typically produced by CD8(+) T cells. These results provide new insights into molecular mechanisms that contribute to the enhanced functionality of human CD8(+) TM and their prominent role in protection and auto-immunity.

  5. A rapid method for simultaneous determination of arsenic, cadmium and lead in drinking water by inductively coupled plasma mass spectrometry

    Directory of Open Access Journals (Sweden)

    Joshua Rey P. Torres

    Full Text Available The raw water source of drinking water in most areas in the Philippines is typically river water and in some cases groundwater. These sources are prone to elevated levels of metals and metalloids that may cause exposure of the general population when the treatment of the water is inadequate. This work presents a simple method based on EPA Method 200.8 for the determination of total concentrations of arsenic (As, cadmium (Cd and lead (Pb in drinking water using inductively coupled plasma-mass spectrometry (ICP-MS as the element-selective detector. This was applied in the determination of these elements in the water supply in Metro Manila, Philippines. The method detection limits were 0.095 μg L-1, 0.043 μg L-1, and 0.114 μg L-1 for total As, Cd and Pb, respectively.The method was validated using National Institute of Standards and Technology (NIST 1643e certified reference material for trace elements in water and determined values were 60.4 ± 0.5 μg L-1, 6.7 ± 0.1 μg L-1, and 19.6 ± 0.5 μg L-1 for As, Cd and Pb, respectively. These determined values were in good agreement with the certified values in the reference material. Analysis of actual drinking water samples showed that most samples did not exceed the limit of the Philippine drinking water standard for the elements.

  6. Rapid induction of orthotopic hepatocellular carcinoma in immune-competent rats by non-invasive ultrasound-guided cells implantation

    Directory of Open Access Journals (Sweden)

    Pan Huay-Ben

    2010-07-01

    Full Text Available Abstract Background The fact that prognoses remain poor in patients with advanced hepatocellular carcinoma highlights the demand for suitable animal models to facilitate the development of anti-cancer medications. This study employed a relatively non-invasive approach to establish an orthotopic hepatocellular carcinoma model in immune-competent rats. This was done by ultrasound-guided implantation of cancer cells and the model was used to evaluate the therapeutic efficacy of short-term and low-dose epirubicin chemotherapy. Methods Rat Novikoff hepatoma cells were injected percutaneously into the liver lobes of Sprague-Dawley rats under the guidance of high resolution ultrasound. The implantation rate and the correlation between dissected and ultrasound-measured tumor sizes were evaluated. A similar induction procedure was performed by means of laparotomy in a different group of rats. Pairs of tumor measurement were compared by ultrasound and computerized tomography scan. Rats with a successful establishment of the tumor were divided into the treatment (7-day low-dose epirubicin group and the control group. The tumor sizes were non-invasively monitored by the same ultrasound machine. Blood and tumor tissues from tumor-bearing rats were examined by biochemical and histological analysis respectively. Results Ultrasound-guided implantation of Novikoff hepatoma cells led to the formation of orthotopic hepatocellular carcinoma in 60.4% (55/91 of the Sprague-Dawley rats. Moreover, tumor sizes measured by ultrasound significantly correlated with those measured by calipers after sacrificing the animals (P Conclusions Ultrasound-guided implantation of Novikoff hepatoma cells is an effective means of establishing orthotopic hepatocellular carcinoma in Sprague-Dawley rats. Short-term and low-dose epirubicin chemotherapy had perturbed tumor progression by inducing apoptosis and neovascularization blockade.

  7. Rapid Induction of Hypothalamic Iodothyronine Deiodinase Expression by Photoperiod and Melatonin in Juvenile Siberian Hamsters (Phodopus sungorus)

    Science.gov (United States)

    Prendergast, Brian J.; Pyter, Leah M.; Kampf-Lassin, August; Patel, Priyesh N.

    2013-01-01

    Production of T3 in the mediobasal hypothalamus is critical for regulation of seasonal reproductive physiology. Type 2 iodothyronine deiodinase (DIO2) and DIO3 enzymes catalyze the prohormone T4 into biologically-active T3 and biologically-inactive rT3, respectively. In several seasonally-breeding vertebrates, DIO2 and DIO3 expression is implicated in photoperiod signal transduction in adulthood. These experiments tested the hypothesis that juvenile Siberian hamsters, which are highly responsive to photoperiod at weaning (postnatal day [PND]18), exhibit rapid and sustained changes in hypothalamic dio3 mRNA expression during photoperiod-induced and photoperiod-inhibited puberty. Hypothalamic dio2 and dio3 expression was measured via quantitative PCR in hamsters born and reared in a long-day photoperiod (15L:9D) and weaned on PND18 into short-day photoperiods (9L:15D). In SD males, hypothalamic dio3 mRNA was elevated 2.5-fold within 3 days (PND21) and continued to increase (>20-fold) through PND32; changes in dio3 mRNA preceded inhibition of gonadotropin (FSH) secretion and gonadal regression in SD. Females exhibited comparable dio3 responses to SD. In LD males, dio3 remained low and invariant from PND18–PND32. In contrast, dio2 mRNA rose conspicuously on PND21, independent of photoperiod, returning to basal levels thereafter. In LD, a single afternoon melatonin (MEL) injection on PND18 or PND20 was sufficient to increase hypothalamic dio3 mRNA, and dio3 increased in proportion to the number of successive days of MEL treatment. SD photoperiods and MEL exert rapid, sustained, and additive effects on hypothalamic dio3 mRNA, which may play a central role in inhibiting maturation of the peripubertal hypothalamo-pituitary-gonadal axis. PMID:23295738

  8. Rapid generation of hydrogen peroxide contributes to the complex cell death induction by the angucycline antibiotic landomycin E.

    Science.gov (United States)

    Panchuk, Rostyslav R; Lehka, Lilya V; Terenzi, Alessio; Matselyukh, Bohdan P; Rohr, Jürgen; Jha, Amit K; Downey, Theresa; Kril, Iryna J; Herbacek, Irene; van Schoonhoven, Sushilla; Heffeter, Petra; Stoika, Rostyslav S; Berger, Walter

    2017-05-01

    Landomycin E (LE) is an angucycline antibiotic produced by Streptomyces globisporus. Previously, we have shown a broad anticancer activity of LE which is, in contrast to the structurally related and clinically used anthracycline doxorubicin (Dx), only mildly affected by multidrug resistance-mediated drug efflux. In the present study, cellular and molecular mechanisms underlying the anticancer activity of landomycin E towards Jurkat T-cell leukemia cells were dissected focusing on the involvement of radical oxygen species (ROS). LE-induced apoptosis distinctly differed in several aspects from the one induced by Dx. Rapid generation of both extracellular and cell-derived hydrogen peroxide already at one hour drug exposure was observed in case of LE but not found before 24h for Dx. In contrast, Dx but not LE induced production of superoxide radicals. Mitochondrial damage, as revealed by JC-1 staining, was weakly enhanced already at 3h LE treatment and increased significantly with time. Accordingly, activation of the intrinsic apoptosis pathway initiator caspase-9 was not detectable before 12h exposure. In contrast, cleavage of the down-stream caspase substrate PARP-1 was clearly induced already at the three hour time point. Out of all caspases tested, only activation of effector caspase-7 was induced at this early time points paralleling the LE-induced oxidative burst. Accordingly, this massive cleavage of caspase-7 at early time points was inhibitable by the radical scavenger N-acetylcysteine (NAC). Additionally, only simultaneous inhibition of multiple caspases reduced LE-induced apoptosis. Specific scavengers of both H2O2 and OH(•) effectively decreased LE-induced ROS production, but only partially inhibited LE-induced apoptosis. In contrast, NAC efficiently blocked both parameters. Summarizing, rapid H2O2 generation and a complex caspase activation pattern contribute to the antileukemic effects of LE. As superoxide generation is considered as the main

  9. Rapid speciation of iron by on-line coupling of short column capillary electrophoresis and inductively coupled plasma mass spectrometry with the collision cell technique.

    Science.gov (United States)

    Li, Bao-Hui; Yan, Xiu-Ping

    2007-04-01

    A method for rapid speciation analysis of iron was developed by on-line coupling of short column capillary electrophoresis and inductively coupled plasma mass spectrometry. The collision cell technique was used to eliminate argon-based polyatomic interferences and a Micromist nebulizer was employed to increase the nebulization efficiency. Rapid speciation analysis of Fe(II) and Fe(III) was achieved within 1 min by short column capillary electrophoresis in a 14 cm x 50 microm id capillary at 28 kV voltage with a mixture of 15 mmol/L tris(hydroxymethyl)aminomethane + 1 mmol/L 1,10-phenanthroline + 1 mmol/L EDTA (pH 8.6) as running electrolyte. The precisions (RSD, n = 5) of migration time and peak area for Fe(II) and Fe(III) were in the range of 1.0 - 2.6 and 1.9 - 3.9%, respectively. The limits of detection (3sigma) of Fe(II) and Fe(III) were 10.0 and 8.3 microg/L, respectively.

  10. Capillary electrophoresis coupled with inductively coupled mass spectrometry as an alternative to cloud point extraction based methods for rapid quantification of silver ions and surface coated silver nanoparticles.

    Science.gov (United States)

    Qu, Haiou; Mudalige, Thilak K; Linder, Sean W

    2016-01-15

    Speciation and accurate quantification of ionic silver and metallic silver nanoparticles are critical to investigate silver toxicity and to determine the shelf-life of products that contain nano silver under various storage conditions. We developed a rapid method for quantification of silver ions and silver nanoparticles using capillary electrophoresis (CE) interfaced with inductively-coupled plasma mass spectrometry (ICPMS). The addition of 2-mercaptopropionylglycine (tiopronin) to the background electrolyte was used to facilitate the chromatographic separation of ionic silver and maintain the oxidation state of silver. The obtained limits of detection were 0.05 μg kg(-1) of silver nanoparticles and 0.03 μg kg(-1) of ionic silver. Nanoparticles of varied sizes (10-110 nm) with different surface coating, including citrate acid, lipoic acid, polyvinylpyrrolidone and bovine serum albumin (BSA) were successfully analyzed. Particularly good recoveries (>93%) were obtained for both ionic silver and silver nanoparticle in the presence of excess amount of BSA. The method was further tested with six commercially available dietary supplements which varied in concentration and matrix components. The summed values of silver ions and silver nanoparticles correlated well with the total silver concentration determined by ICPMS after acid digestion. This method can serve as an alternative to cloud point extraction technique when the extraction efficiency for protein coated nanoparticles is low. Copyright © 2015 Elsevier B.V. All rights reserved.

  11. Combining non-invasive methods for the rapid assessment of mammalian richness in a transect-quadrat survey scheme - Case Study of the Horsh Ehden Nature Reserve, North Lebanon.

    Science.gov (United States)

    Nader, Manal R; El Indary, Shadi; Abi Salloum, Bachir; Abou Dagher, Manale

    2011-01-01

    Lebanon lacks updated information related to the status of mammalian species, their richness and distribution. This study aimed at developing a rapid assessment methodology combining three non-invasive techniques based on the transect-quadrat survey scheme to measure mammalian richness at the Horsh Ehden Nature Reserve. The achieved results showed that the combination of the three techniques, droppings, footprints and photo-trapping for the rapid assessment of mammalian richness supported by Geographical Information System applications is highly effective. Twenty visits covering twenty quadrats out of 49 over a period of nine months allowed the detection of 12 of the 14 targeted species with droppings providing the majority of evidence while footprints and photo-trapping being of equal efficiency. The method can be easily replicated in any region to rapidly assess mammalian richness and the area of activity of the detected species and therefore directing conservation and management activities towards species of interest.

  12. Colour schemes

    DEFF Research Database (Denmark)

    van Leeuwen, Theo

    2013-01-01

    This chapter presents a framework for analysing colour schemes based on a parametric approach that includes not only hue, value and saturation, but also purity, transparency, luminosity, luminescence, lustre, modulation and differentiation.......This chapter presents a framework for analysing colour schemes based on a parametric approach that includes not only hue, value and saturation, but also purity, transparency, luminosity, luminescence, lustre, modulation and differentiation....

  13. Labor Induction

    Science.gov (United States)

    ... QUESTIONS FAQ154 LABOR, DELIVERY, AND POSTPARTUM CARE Labor Induction • What is labor induction? • Why is labor induced? • What is the Bishop ... oxytocin? • What are the risks associated with labor induction? • Is labor induction always effective? •Glossary What is ...

  14. Improved outcome of adult acute lymphoblastic leukaemia by moderately intensified chemotherapy which includes a 'pre-induction' course for rapid tumour reduction : preliminary results on 66 patients

    NARCIS (Netherlands)

    Daenen, S; Van Imhoff, GW; Van den Berg, E; De Kam, PJ; Haaxma-Reiche, H; Vellenga, E; Smit, JW; Halie, RM

    Sixty-six consecutive adult patients with acute lymphoblastic leukaemia (ALL) were treated with intensified chemotherapy which included a 'pre-induction' course of cytarabine (AraC) and etoposide (VP16) when the white blood cell count (WBC) was greater than or equal to 30x10(9)/l (18 patients), and

  15. An electrospray/inductively coupled plasma dual-source time-of-flight mass spectrometer for rapid metallomic and speciation analysis. Part 1. Molecular channel characterization.

    Science.gov (United States)

    Rogers, Duane A; Ray, Steven J; Hieftje, Gary M

    2010-04-01

    A new time-of-flight mass spectrometer has been developed that uses an electrospray source and an inductively coupled plasma to extract molecular, atomic, and isotopic information simultaneously from a single sample. This paper will focus on characterization of the ESI channel. Sensitivities are reported for hexadecyltrimethylammonium, tetrahexylammonium, tetraoctylammonium, myoglobin, insulin, cyanocobalamin, leucine enkephalin, and alcohol dehydrogenase. Skimmer-nozzle collisionally induced dissociation is explored for adduct removal and analyte fragmentation on the ESI channel for tetraoctylammonium ion and leucine enkephalin. Long-term and short-term spray stability is also examined.

  16. Rapid Determination of Plutonium Isotopes in Environmental Samples Using Sequential Injection Extraction Chromatography and Detection by Inductively Coupled Plasma Mass Spectrometry

    DEFF Research Database (Denmark)

    Qiao, Jixin; Hou, Xiaolin; Roos, Per

    2009-01-01

    This article presents an automated method for the rapid determination of 239Pu and 240Pu in various environmental samples. The analytical method involves the in-line separation of Pu isotopes using extraction chromatography (TEVA) implemented in a sequential injection (SI) network followed by det...

  17. Additive operator-difference schemes splitting schemes

    CERN Document Server

    Vabishchevich, Petr N

    2013-01-01

    Applied mathematical modeling isconcerned with solving unsteady problems. This bookshows how toconstruct additive difference schemes to solve approximately unsteady multi-dimensional problems for PDEs. Two classes of schemes are highlighted: methods of splitting with respect to spatial variables (alternating direction methods) and schemes of splitting into physical processes. Also regionally additive schemes (domain decomposition methods)and unconditionally stable additive schemes of multi-component splitting are considered for evolutionary equations of first and second order as well as for sy

  18. The department of veterans affairs nutritional status classification scheme allows for rapid assessment of nutritional status prior to autologous peripheral blood stem cell transplantation and identifies patients at high risk of transplant-related complications.

    Science.gov (United States)

    Toro, Juan J; Haile, David J; Chao, Ju-Hsien; Schneider, Deanna; Jewell, Pamela S; Lee, Shuko; Freytes, César O

    2009-09-01

    The nutritional assessment of patients prior to autologous peripheral blood stem cell transplantation (APBSCT) is labor intensive. A simple method of nutritional assessment prior to APSCT would be extremely helpful, especially if this method could identify patients at high risk of transplant-related complications. The Department of Veterans Affairs (VA) developed a Nutritional Status Classification Scheme (NSCS) to identify nutritionally compromised inpatients rapidly and reliably. The objective of this study was to determine if the use of the VA-NSCS could be utilized as a tool for the evaluation of patients prior to APBSCT and to determine if this tool could be used to identify patients at high risk of transplant-related complications. The nutritional status of 128 patients who underwent APBSCT was assessed by a registered dietician, utilizing the VA-NSCS, upon admission to the hospital and prior to conditioning regimen. Patients with moderately compromised nutritional status pretransplantation experienced a higher incidence of infections, longer duration of diarrhea, and longer length of hospital stay when compared to patients with normal or mildly compromised nutritional status. Our study demonstrates that the VA-NSCS, a simple and inexpensive tool to assess nutritional status, was useful in determining the pretransplant nutritional status of patients with lymphogenous malignancies who underwent APBSCT. In addition, this method was able to identify patients at a higher risk of posttransplant complications. Future studies should be undertaken to determine the optimal method for the nutritional assessment of autologous stem cell transplant candidates.

  19. Rapid opiate detoxification and antagonist induction under general anaesthesia or intravenous sedation is humane, sometimes essential and should always be an option. Three illustrative case reports involving diabetes and epilepsy and a review of the literature.

    Science.gov (United States)

    Brewer, Colin; de Jong, Catherine; Williams, Jonathan

    2014-01-01

    When abstinence is an appropriate goal, controlled studies and systematic reviews confirm that rapid, antagonist-precipitated opiate withdrawal procedures are the most effective and cost effective methods of initiating abstinence, and naltrexone (NTX) maintenance. While 'rapid' withdrawal, better conceptualised as Rapid Antagonist Induction (RAI), can often be humanely achieved with modest sedation levels, we present three case histories to support our argument that for some patients, general anaesthesia (GA), or techniques of intravenous sedation (IVS) that approach GA, are essential for safety and success. This includes patients with intercurrent disease (e.g. epilepsy or insulin-dependent diabetes) but also those with severe withdrawal phobia after previous distressing experiences. We discuss the history of the procedure. The dangers of RAI under GA or IVS in experienced hands have been exaggerated and the appropriate expertise should be more easily available. Patients and clinicians readily accept risks of major surgery for the excessive intake of food that causes most obesity. Similar risk-acceptance exists in cosmetic surgery and obstetrics. The increasing use and effectiveness of long-acting implants or depot-injections of NTX for relapse-prevention have largely solved compliance problems that undermined the potential of oral NTX. Their ability to prevent opiate overdose in abstinent, non-tolerant patients also strengthens arguments both for offering RAI as a therapeutic option and for reducing psychological, professional and practical barriers to using it.

  20. Rapid Induction of Cerebral Organoids From Human Induced Pluripotent Stem Cells Using a Chemically Defined Hydrogel and Defined Cell Culture Medium.

    Science.gov (United States)

    Lindborg, Beth A; Brekke, John H; Vegoe, Amanda L; Ulrich, Connor B; Haider, Kerri T; Subramaniam, Sandhya; Venhuizen, Scott L; Eide, Cindy R; Orchard, Paul J; Chen, Weili; Wang, Qi; Pelaez, Francisco; Scott, Carolyn M; Kokkoli, Efrosini; Keirstead, Susan A; Dutton, James R; Tolar, Jakub; O'Brien, Timothy D

    2016-07-01

    Tissue organoids are a promising technology that may accelerate development of the societal and NIH mandate for precision medicine. Here we describe a robust and simple method for generating cerebral organoids (cOrgs) from human pluripotent stem cells by using a chemically defined hydrogel material and chemically defined culture medium. By using no additional neural induction components, cOrgs appeared on the hydrogel surface within 10-14 days, and under static culture conditions, they attained sizes up to 3 mm in greatest dimension by day 28. Histologically, the organoids showed neural rosette and neural tube-like structures and evidence of early corticogenesis. Immunostaining and quantitative reverse-transcription polymerase chain reaction demonstrated protein and gene expression representative of forebrain, midbrain, and hindbrain development. Physiologic studies showed responses to glutamate and depolarization in many cells, consistent with neural behavior. The method of cerebral organoid generation described here facilitates access to this technology, enables scalable applications, and provides a potential pathway to translational applications where defined components are desirable. Tissue organoids are a promising technology with many potential applications, such as pharmaceutical screens and development of in vitro disease models, particularly for human polygenic conditions where animal models are insufficient. This work describes a robust and simple method for generating cerebral organoids from human induced pluripotent stem cells by using a chemically defined hydrogel material and chemically defined culture medium. This method, by virtue of its simplicity and use of defined materials, greatly facilitates access to cerebral organoid technology, enables scalable applications, and provides a potential pathway to translational applications where defined components are desirable. ©AlphaMed Press.

  1. Scheme Program Documentation Tools

    DEFF Research Database (Denmark)

    Nørmark, Kurt

    2004-01-01

    This paper describes and discusses two different Scheme documentation tools. The first is SchemeDoc, which is intended for documentation of the interfaces of Scheme libraries (APIs). The second is the Scheme Elucidator, which is for internal documentation of Scheme programs. Although the tools...

  2. Rapid and simultaneous determination of neptunium and plutonium in environmental samples using anion exchange chromatographic and sequential injection setup combined with inductively coupled plasma mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Jixin Qiao; Hou, X.; Roos, P. (Technical Univ. of Denmark, Risoe National Lab. for Sustainable Energy. Radiation Research Div., Roskilde (Denmark)); Miro, M. (Univ. of the Balearic Islands, Dept. of Chemistry, Faculty of Sciences, Palma de Mallorca (Spain))

    2010-03-15

    Full text: This paper presents an automated analytical method for the rapid and simultaneous determination of Pu and Np in the environmental samples. Anion exchange chromatographic column was incorporated in a sequential injection system to actualize the automated separation of Pu isotpes along with 237Np from the matrix elements and interfering radionuclides. K{sub 2}S{sub 2}O{sub 5}-conc. HNO{sub 3} was applied as redox reagents for the valence adjustment and stabilization of Pu(IV) and Np(IV). 242Pu preformed well as a tracer for both Pu isotopes and 237Np. It was observed that the cross-link and particle size of the resins had significant effluence on the separation efficiency and anion exchange resin Bio-Rad AG 1 x 4 with the particle size of 100-200 mesh was chosen as the optimum. The investigation on the capacity showed small-sized column packed with 2mL resin sufficed up to 50g of soil sample, which provides an advantage of low consumption of the resin and low generation of acid waste after the column washing. The analytical results for Pu and Np in three reference materials showed good agreement with the certified or reference values at the 0.05 significance level. Chemical yields of Pu and Np equally range from 80% to 100%, and the decontamination factors for uranium, thorium and lead were in the range of 103 to 104. The total time of separation for a single sample was < 2.5 hours, which extremely improve the analysis efficiency and reduces the labor intensity, as well as enables a rapid determination of Pu and Np in emergency situations. (author)

  3. Rapid isolation of plutonium in environmental solid samples using sequential injection anion exchange chromatography followed by detection with inductively coupled plasma mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Qiao Jixin, E-mail: jixin.qiao@risoe.d [Radiation Research Division, Riso National Laboratory for Sustainable Energy, Technical University of Denmark, DK-4000 Roskilde (Denmark); Hou Xiaolin; Roos, Per [Radiation Research Division, Riso National Laboratory for Sustainable Energy, Technical University of Denmark, DK-4000 Roskilde (Denmark); Miro, Manuel [Department of Chemistry, Faculty of Sciences, University of the Balearic Islands, Carretera de Valldemossa km. 7.5, E-07122 Palma de Mallorca, Illes Balears (Spain)

    2011-01-31

    This paper reports an automated analytical method for rapid determination of plutonium isotopes ({sup 239}Pu and {sup 240}Pu) in environmental solid extracts. Anion exchange chromatographic columns were incorporated in a sequential injection (SI) system to undertake the automated separation of plutonium from matrix and interfering elements. The analytical results most distinctly demonstrated that the crosslinkage of the anion exchanger is a key parameter controlling the separation efficiency. AG 1-x4 type resin was selected as the most suitable sorbent material for analyte separation. Investigation of column size effect upon the separation efficiency revealed that small-sized (2 mL) columns sufficed to handle up to 50 g of environmental soil samples. Under the optimum conditions, chemical yields of plutonium exceeded 90% and the decontamination factors for uranium, thorium and lead ranged from 10{sup 3} to 10{sup 4}. The determination of plutonium isotopes in three standard/certified reference materials (IAEA-375 soil, IAEA-135 sediment and NIST-4359 seaweed) and two reference samples (Irish Sea sediment and Danish soil) revealed a good agreement with reference/certified values. The SI column-separation method is straightforward and less labor intensive as compared with batch-wise anion exchange chromatographic procedures. Besides, the automated method features low consumption of ion-exchanger and reagents for column washing and elution, with the consequent decrease in the generation of acidic waste, thus bearing green chemical credentials.

  4. Practicing induction:

    DEFF Research Database (Denmark)

    Sprogøe, Jonas; Rohde, Nicolas

    2009-01-01

    We claim that induction potentially triggers both individual and organizational learning and by drawing on practice-based theory we discuss how the interplay between individual and organization, what we call a generative dance, ignites both kinds of learning....

  5. Induction Brazing

    DEFF Research Database (Denmark)

    Henningsen, Poul

    Induction brazing is a fast and appropriate method for industrial joining of complex geometries and metal combinations. In all types of brazing processes it is important to heat the joint interface of the two materials to the same, high temperature. If one of the specimens is warmer than the other...... materials has large influence on the heating time and temperature distribution in induction heating. In order to ensure high and uniform temperature distribution near the interface of a joint between dissimilar materials the precise coil geometry and position is of great importance. The present report...... presents a combined numerical and experimental method for determination of appropriate/optimiged coil geometry and position in induction brazing tube-to-plate joints of different ratios between tube and plate thickness and different combinations of the materials stainless steel, brass and copper...

  6. Induction accelerators

    CERN Document Server

    Takayama, Ken

    2011-01-01

    A broad class of accelerators rests on the induction principle whereby the accelerating electrical fields are generated by time-varying magnetic fluxes. Particularly suitable for the transport of bright and high-intensity beams of electrons, protons or heavy ions in any geometry (linear or circular) the research and development of induction accelerators is a thriving subfield of accelerator physics. This text is the first comprehensive account of both the fundamentals and the state of the art about the modern conceptual design and implementation of such devices. Accordingly, the first part of the book is devoted to the essential features of and key technologies used for induction accelerators at a level suitable for postgraduate students and newcomers to the field. Subsequent chapters deal with more specialized and advanced topics.

  7. Effect of residual stress relaxation by means of local rapid induction heating on stress corrosion cracking behavior and electrochemical characterization of welded Ti-6Al-4V alloy under slow strain rate test

    Science.gov (United States)

    Liu, Yan; Tang, Shawei; Liu, Guangyi; Sun, Yue; Hu, Jin

    2017-05-01

    In this study, a welded Ti-6Al-4V alloy was treated by means of local rapid induction heating in order to relax the residual stress existed in the weldment. The welded samples were heat treated at the different temperatures. The stress corrosion cracking behavior and electrochemical characterization of the as-welded samples before and after the post weld heat treatment as a function of residual stress were investigated. Electrochemical impedance spectroscopy measurements of the samples under slow strain rate test were performed in a LiCl-methanol solution. The results demonstrated that the residual stress in the as-welded sample was dramatically reduced after the post weld heat treatment, and the residual stress decreased with the increase in the heat treatment temperature. The stress corrosion cracking susceptibility and electrochemical activity of the as-welded sample were significantly reduced after the heat treatment due to the relaxation of the residual stress, which gradually decreased with the decreasing value of the residual stress distributed in the heat treated samples.

  8. Perry's Intellectual Scheme.

    Science.gov (United States)

    Love, Patrick G.; Guthrie, Victoria L.

    1999-01-01

    Summarizes William Perry's intellectual scheme and places it in the context of the 1990's. Perry's scheme of cognitive development, though more than thirty years old, is still being used by practitioners today to enhance practice in and out of the classroom. It laid a foundation for new research to extend, challenge, and build onto the scheme.…

  9. Finite Boltzmann schemes

    NARCIS (Netherlands)

    Sman, van der R.G.M.

    2006-01-01

    In the special case of relaxation parameter = 1 lattice Boltzmann schemes for (convection) diffusion and fluid flow are equivalent to finite difference/volume (FD) schemes, and are thus coined finite Boltzmann (FB) schemes. We show that the equivalence is inherent to the homology of the

  10. Induction practice -

    DEFF Research Database (Denmark)

    Rohde, Nicolas; Sprogøe, Jonas

    2007-01-01

    of learning. We focus on and describe the interplay that takes place in particular induction events and analyze the "dance" through the lens of learning. The paper concludes with a brief discussion about the implications for practitioners and the challenges and future research prospects we have encountered....... We draw on an empirical enquiry in two organizational settings, a Danish management consulting company and a German retail bank....

  11. Induction motor control

    Science.gov (United States)

    Hansen, Irving G.

    1990-01-01

    Electromechanical actuators developed to date have commonly ultilized permanent magnet (PM) synchronous motors. More recently switched reluctance (SR) motors have been advocated due to their robust characteristics. Implications of work which utilized induction motors and advanced control techniques are discussed. When induction motors are operated from an energy source capable of controlling voltages and frequencies independently, drive characteristics are obtained which are superior to either PM or SR motors. By synthesizing the machine frequency from a high-frequency carrier (nominally 20 kHz), high efficiencies, low distortion, and rapid torque response are available. At this time multiple horsepower machine drives were demonstrated, and work is on-going to develop a 20 hp average, 40 hp peak class of aerospace actuators. This effort is based upon high-frequency power distribution and management techniques developed by NASA for Space Station Freedom.

  12. Induction motor control

    Science.gov (United States)

    Hansen, Irving G.

    Electromechanical actuators developed to date have commonly ultilized permanent magnet (PM) synchronous motors. More recently switched reluctance (SR) motors have been advocated due to their robust characteristics. Implications of work which utilized induction motors and advanced control techniques are discussed. When induction motors are operated from an energy source capable of controlling voltages and frequencies independently, drive characteristics are obtained which are superior to either PM or SR motors. By synthesizing the machine frequency from a high-frequency carrier (nominally 20 kHz), high efficiencies, low distortion, and rapid torque response are available. At this time multiple horsepower machine drives were demonstrated, and work is on-going to develop a 20 hp average, 40 hp peak class of aerospace actuators. This effort is based upon high-frequency power distribution and management techniques developed by NASA for Space Station Freedom.

  13. High-current pulses from inductive energy stores

    Science.gov (United States)

    Wipf, S. L.

    1981-11-01

    Superconducting inductive energy stores can be used for high power pulse supplies if a suitable current multiplication scheme is used. The concept of an inductive Marx generator is superior to a transformer. A third scheme, a variable flux linkage device, is suggested; in multiplying current it also compresses energy. Its function is in many ways analogous to that of a horsewhip. Superconductor limits indicate that peak power levels of TW can be reached for stored energies above 1 MJ.

  14. The Mawala irrigation scheme

    OpenAIRE

    de Bont, Chris

    2018-01-01

    This booklet was written to share research results with farmers and practitioners in Tanzania. It gives a summary of the empirical material collected during three months of field work in the Mawala irrigation scheme (Kilimanjaro Region), and includes maps, tables and photos. It describes the history of the irrigation scheme, as well current irrigation and farming practices. It especially focuses on the different kinds of infrastructural improvement in the scheme (by farmers and the government...

  15. A rapid and high-precision method for sulfur isotope δ(34)S determination with a multiple-collector inductively coupled plasma mass spectrometer: matrix effect correction and applications for water samples without chemical purification.

    Science.gov (United States)

    Lin, An-Jun; Yang, Tao; Jiang, Shao-Yong

    2014-04-15

    Previous studies have indicated that prior chemical purification of samples, although complex and time-consuming, is essential in obtaining precise and accurate results for sulfur isotope ratios using multiple-collector inductively coupled plasma mass spectrometry (MC-ICP-MS). In this study, we introduce a new, rapid and precise MC-ICP-MS method for sulfur isotope determination from water samples without chemical purification. The analytical work was performed on an MC-ICP-MS instrument with medium mass resolution (m/Δm ~ 3000). Standard-sample bracketing (SSB) was used to correct samples throughout the analytical sessions. Reference materials included an Alfa-S (ammonium sulfate) standard solution, ammonium sulfate provided by the lab of the authors and fresh seawater from the South China Sea. A range of matrix-matched Alfa-S standard solutions and ammonium sulfate solutions was used to investigate the matrix (salinity) effect (matrix was added in the form of NaCl). A seawater sample was used to confirm the reliability of the method. Using matrix-matched (salinity-matched) Alfa-S as the working standard, the measured δ(34)S value of AS (-6.73 ± 0.09‰) was consistent with the reference value (-6.78 ± 0.07‰) within the uncertainty, suggesting that this method could be recommended for the measurement of water samples without prior chemical purification. The δ(34)S value determination for the unpurified seawater also yielded excellent results (21.03 ± 0.18‰) that are consistent with the reference value (20.99‰), thus confirming the feasibility of the technique. The data and the results indicate that it is feasible to use MC-ICP-MS and matrix-matched working standards to measure the sulfur isotopic compositions of water samples directly without chemical purification. In comparison with the existing MC-ICP-MS techniques, the new method is better for directly measuring δ(34)S values in water samples with complex matrices; therefore, it can

  16. Towards Symbolic Encryption Schemes

    DEFF Research Database (Denmark)

    Ahmed, Naveed; Jensen, Christian D.; Zenner, Erik

    2012-01-01

    , namely an authenticated encryption scheme that is secure under chosen ciphertext attack. Therefore, many reasonable encryption schemes, such as AES in the CBC or CFB mode, are not among the implementation options. In this paper, we report new attacks on CBC and CFB based implementations of the well...

  17. Multiresolution signal decomposition schemes

    NARCIS (Netherlands)

    J. Goutsias (John); H.J.A.M. Heijmans (Henk)

    1998-01-01

    textabstract[PNA-R9810] Interest in multiresolution techniques for signal processing and analysis is increasing steadily. An important instance of such a technique is the so-called pyramid decomposition scheme. This report proposes a general axiomatic pyramid decomposition scheme for signal analysis

  18. Adaptive protection scheme

    Directory of Open Access Journals (Sweden)

    R. Sitharthan

    2016-09-01

    Full Text Available This paper aims at modelling an electronically coupled distributed energy resource with an adaptive protection scheme. The electronically coupled distributed energy resource is a microgrid framework formed by coupling the renewable energy source electronically. Further, the proposed adaptive protection scheme provides a suitable protection to the microgrid for various fault conditions irrespective of the operating mode of the microgrid: namely, grid connected mode and islanded mode. The outstanding aspect of the developed adaptive protection scheme is that it monitors the microgrid and instantly updates relay fault current according to the variations that occur in the system. The proposed adaptive protection scheme also employs auto reclosures, through which the proposed adaptive protection scheme recovers faster from the fault and thereby increases the consistency of the microgrid. The effectiveness of the proposed adaptive protection is studied through the time domain simulations carried out in the PSCAD⧹EMTDC software environment.

  19. Lexicographic Path Induction

    DEFF Research Database (Denmark)

    Schürmann, Carsten; Sarnat, Jeffrey

    2009-01-01

    an induction principle that combines the comfort of structural induction with the expressive strength of transfinite induction. Using lexicographic path induction, we give a consistency proof of Martin-Löf’s intuitionistic theory of inductive definitions. The consistency of Heyting arithmetic follows directly...

  20. Predictive Direct Torque Control for Induction Motor Drive

    Science.gov (United States)

    Benzaioua, A.; Ouhrouche, M.; Merabet, A.

    2008-06-01

    A predictive control combined with the direct torque control (DTC) to induction motor drive is presented. A new switching strategy is used in DTC, where the constant switching frequency is taken constant, and the speed tracking is done by a predictive controller. The scheme control is applied to induction motor drive in order to perform the dynamic responses of electromagnetic torque, stator flux and speed. A comparison between the PI controller and predictive controller for speed tracking is done. Results of simulation show that the performance of the proposed control scheme for induction motor drive is accurately achieved.

  1. Succesful labelling schemes

    DEFF Research Database (Denmark)

    Juhl, Hans Jørn; Stacey, Julia

    2001-01-01

    It is usual practice to evaluate the success of a labelling scheme by looking at the awareness percentage, but in many cases this is not sufficient. The awareness percentage gives no indication of which of the consumer segments that are aware of and use labelling schemes and which do not....... In the spring of 2001 MAPP carried out an extensive consumer study with special emphasis on the Nordic environmentally friendly label 'the swan'. The purpose was to find out how much consumers actually know and use various labelling schemes. 869 households were contacted and asked to fill in a questionnaire....... 664 households returned a completed questionnaire. There were five answering categories for each label in the questionnaire: * have not seen the label before. * I have seen the label before but I do not know the precise contents of the labelling scheme. * I have seen the label before, I do not know...

  2. Tabled Execution in Scheme

    Energy Technology Data Exchange (ETDEWEB)

    Willcock, J J; Lumsdaine, A; Quinlan, D J

    2008-08-19

    Tabled execution is a generalization of memorization developed by the logic programming community. It not only saves results from tabled predicates, but also stores the set of currently active calls to them; tabled execution can thus provide meaningful semantics for programs that seemingly contain infinite recursions with the same arguments. In logic programming, tabled execution is used for many purposes, both for improving the efficiency of programs, and making tasks simpler and more direct to express than with normal logic programs. However, tabled execution is only infrequently applied in mainstream functional languages such as Scheme. We demonstrate an elegant implementation of tabled execution in Scheme, using a mix of continuation-passing style and mutable data. We also show the use of tabled execution in Scheme for a problem in formal language and automata theory, demonstrating that tabled execution can be a valuable tool for Scheme users.

  3. Compact Spreader Schemes

    Energy Technology Data Exchange (ETDEWEB)

    Placidi, M.; Jung, J. -Y.; Ratti, A.; Sun, C.

    2014-07-25

    This paper describes beam distribution schemes adopting a novel implementation based on low amplitude vertical deflections combined with horizontal ones generated by Lambertson-type septum magnets. This scheme offers substantial compactness in the longitudinal layouts of the beam lines and increased flexibility for beam delivery of multiple beam lines on a shot-to-shot basis. Fast kickers (FK) or transverse electric field RF Deflectors (RFD) provide the low amplitude deflections. Initially proposed at the Stanford Linear Accelerator Center (SLAC) as tools for beam diagnostics and more recently adopted for multiline beam pattern schemes, RFDs offer repetition capabilities and a likely better amplitude reproducibility when compared to FKs, which, in turn, offer more modest financial involvements both in construction and operation. Both solutions represent an ideal approach for the design of compact beam distribution systems resulting in space and cost savings while preserving flexibility and beam quality.

  4. Improving uptake and use of malaria rapid diagnostic tests in the context of artemisinin drug resistance containment in eastern Myanmar: an evaluation of incentive schemes among informal private healthcare providers.

    Science.gov (United States)

    Aung, Tin; White, Christopher; Montagu, Dominic; McFarland, Willi; Hlaing, Thaung; Khin, Hnin Su Su; San, Aung Kyaw; Briegleb, Christina; Chen, Ingrid; Sudhinaraset, May

    2015-03-06

    As efforts to contain artemisinin resistance and eliminate Plasmodium falciparum intensify, the accurate diagnosis and prompt effective treatment of malaria are increasingly needed in Myanmar and the Greater Mekong Sub-region (GMS). Rapid diagnostic tests (RDTs) have been shown to be safe, feasible, and effective at promoting appropriate treatment for suspected malaria, which are of particular importance to drug resistance containment. The informal private sector is often the first point of care for fever cases in malaria endemic areas across Myanmar and the GMS, but there is little published information about informal private provider practices, quality of service provision, or potential to contribute to malaria control and elimination efforts. This study tested different incentives to increase RDT use and improve the quality of care among informal private healthcare providers in Myanmar. The study randomized six townships in the Mon and Shan states of rural Myanmar into three intervention arms: 1) RDT price subsidies, 2) price subsidies with product-related financial incentives, and 3) price subsidies with intensified information, education and counselling (IEC). The study assessed the uptake of RDT use in the communities by cross-sectional surveys of 3,150 households at baseline and six months post-intervention (6,400 households total, 832 fever cases). The study also used mystery clients among 171 providers to assess quality of service provision across intervention arms. The pilot intervention trained over 600 informal private healthcare providers. The study found a price subsidy with intensified IEC, resulted in the highest uptake of RDTs in the community, as compared to subsidies alone or merchandise-related financial incentives. Moreover, intensified IEC led to improvements in the quality of care, with mystery client surveys showing almost double the number of correct treatment following diagnostic test results as compared to a simple subsidy. Results show

  5. 4. Payment Schemes

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 6; Issue 2. Electronic Commerce - Payment Schemes. V Rajaraman. Series Article Volume 6 Issue 2 February 2001 pp 6-13. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/006/02/0006-0013 ...

  6. Alternative health insurance schemes

    DEFF Research Database (Denmark)

    Keiding, Hans; Hansen, Bodil O.

    2002-01-01

    In this paper, we present a simple model of health insurance with asymmetric information, where we compare two alternative ways of organizing the insurance market. Either as a competitive insurance market, where some risks remain uninsured, or as a compulsory scheme, where however, the level...... competitive insurance; this situation turns out to be at least as good as either of the alternatives...

  7. MIT Scheme Reference Manual

    Science.gov (United States)

    1991-01-01

    their Butterfly Scheme Reference, and to Margaret O’Connell for translating it from BBN’s text-formatting language to ours. Special thanks to Richard ... Stallman , Bob Chassell, and Brian Fox, all of the Free Software Foundation, for creating and maintaining the Texinfo formatting language in which this

  8. Backstepping Strategy for Induction Motor Control

    DEFF Research Database (Denmark)

    Rasmussen, Henrik; Vadstrup, P.; Børsting, H.

    2000-01-01

    Using backstepping, which is a recursive nonlinear design method, a novel approach to control of induction motors is developed. The resulting scheme leads to a nonlinear controller for the torque and the amplitude of the field. A combination of nonlinear damping and observer backstepping with a s......Using backstepping, which is a recursive nonlinear design method, a novel approach to control of induction motors is developed. The resulting scheme leads to a nonlinear controller for the torque and the amplitude of the field. A combination of nonlinear damping and observer backstepping...... with a simple flux observer is used in the design. Assuming known motor parameters the design achieves stability with guaranteed region of attraction. It is also shown how a conventional field oriented controller may be obtained by omitting parts of the nonlinear controller....

  9. A Scatter Storage Scheme for Dictionary Lookups

    Directory of Open Access Journals (Sweden)

    D. M. Murray

    1970-09-01

    Full Text Available Scatter storage schemes are examined with respect to their applicability to dictionary lookup procedures. Of particular interest are virtual scatter methods which combine the advantages of rapid search speed and reasonable storage requirements. The theoretical aspects of computing hash addresses are developed, and several algorithms are evaluated. Finally, experiments with an actual text lookup process are described, and a possible library application is discussed.

  10. Inductive Monitoring System (IMS)

    Data.gov (United States)

    National Aeronautics and Space Administration — IMS: Inductive Monitoring System The Inductive Monitoring System (IMS) is a tool that uses a data mining technique called clustering to extract models of normal...

  11. Selectively strippable paint schemes

    Science.gov (United States)

    Stein, R.; Thumm, D.; Blackford, Roger W.

    1993-03-01

    In order to meet the requirements of more environmentally acceptable paint stripping processes many different removal methods are under evaluation. These new processes can be divided into mechanical and chemical methods. ICI has developed a paint scheme with intermediate coat and fluid resistant polyurethane topcoat which can be stripped chemically in a short period of time with methylene chloride free and phenol free paint strippers.

  12. Inductive ionospheric solver for magnetospheric MHD simulations

    Directory of Open Access Journals (Sweden)

    H. Vanhamäki

    2011-01-01

    Full Text Available We present a new scheme for solving the ionospheric boundary conditions required in magnetospheric MHD simulations. In contrast to the electrostatic ionospheric solvers currently in use, the new solver takes ionospheric induction into account by solving Faraday's law simultaneously with Ohm's law and current continuity. From the viewpoint of an MHD simulation, the new inductive solver is similar to the electrostatic solvers, as the same input data is used (field-aligned current [FAC] and ionospheric conductances and similar output is produced (ionospheric electric field. The inductive solver is tested using realistic, databased models of an omega-band and westward traveling surge. Although the tests were performed with local models and MHD simulations require a global ionospheric solution, we may nevertheless conclude that the new solution scheme is feasible also in practice. In the test cases the difference between static and electrodynamic solutions is up to ~10 V km−1 in certain locations, or up to 20-40% of the total electric field. This is in agreement with previous estimates. It should also be noted that if FAC is replaced by the ground magnetic field (or ionospheric equivalent current in the input data set, exactly the same formalism can be used to construct an inductive version of the KRM method originally developed by Kamide et al. (1981.

  13. Induction machine handbook

    CERN Document Server

    Boldea, Ion

    2002-01-01

    Often called the workhorse of industry, the advent of power electronics and advances in digital control are transforming the induction motor into the racehorse of industrial motion control. Now, the classic texts on induction machines are nearly three decades old, while more recent books on electric motors lack the necessary depth and detail on induction machines.The Induction Machine Handbook fills industry's long-standing need for a comprehensive treatise embracing the many intricate facets of induction machine analysis and design. Moving gradually from simple to complex and from standard to

  14. CANONICAL BACKWARD DIFFERENTIATION SCHEMES FOR ...

    African Journals Online (AJOL)

    CANONICAL BACKWARD DIFFERENTIATION SCHEMES FOR SOLUTION OF NONLINEAR INITIAL VALUE PROBLEMS OF FIRST ORDER ORDINARY DIFFERENTIAL EQUATIONS. ... Global Journal of Mathematical Sciences ... KEY WORDS: backward differentiation scheme, collocation, initial value problems. Global Jnl ...

  15. 1-1-12 one-step wash-in scheme for desflurane low flow anesthesia: performance without nitrous oxide.

    Science.gov (United States)

    Sathitkarnmanee, Thepakorn; Tribuddharat, Sirirat; Nonlhaopol, Duangthida; Thananun, Maneerat; Somdee, Wilawan

    2015-01-01

    We reported a 1-1-12 wash-in scheme for desflurane-nitrous oxide (N2O) low flow anesthesia that is simple, rapid, and predictable. There remain some situations where N2O should be avoided, which limits the generalizability of this wash-in scheme. The objective of our study was to determine the performance of this scheme in contexts where N2O is not used. We recruited 106 patients scheduled for elective surgery under general anesthesia. After induction and intubation, wash-in was started with a fresh gas flow of air:O2 1:1 L/min and a vaporizer concentration of desflurane of 12%. Controlled ventilation was then adjusted to maintain PACO2 at 30-35 mmHg. The alveolar concentration of desflurane (FAD) rose rapidly from 0% to 6% in 4 minutes in the same pattern as observed in our previous study in which N2O was used. An FAD of 7% was achieved in 6 minutes. An FAD of 1% to 7% occurred at 0.6, 1, 1.5, 2, 3, 4, and 6 minutes. The rise in heart rate during wash-in was statistically significant, although not clinically so. There was a slight but statistically significant decrease in blood pressure, but this had no clinical significance. Performance of the 1-1-12 wash-in scheme is independent of the use of N2O. Respective FADs of 1%, 2%, 3%, 4%, 5%, 6%, and 7% can be expected at 0.6, 1, 1.5, 2, 3, 4, and 6 minutes.

  16. Nonlinear Control of Induction Motors: A Performance Study

    DEFF Research Database (Denmark)

    Rasmussen, Henrik; Vadstrup, P.; Børsting, H.

    1998-01-01

    A novel approach to control of induction motors based on nonlinear state feedback has previously been presented by the authors. The resulting scheme gives a linearized input-output decoupling of the torque and the amplitude of the field. The proposed approach is used to design controllers...... for the field amplitude and the motor torque. The method is compared with the traditional Rotor Field Oriented Control method as regards variations in rotor resistance an magnetizing inductance...

  17. Nonlinear systems time-varying parameter estimation: Application to induction motors

    Energy Technology Data Exchange (ETDEWEB)

    Kenne, Godpromesse [Laboratoire d' Automatique et d' Informatique Appliquee (LAIA), Departement de Genie Electrique, IUT FOTSO Victor, Universite de Dschang, B.P. 134 Bandjoun (Cameroon); Ahmed-Ali, Tarek [Ecole Nationale Superieure des Ingenieurs des Etudes et Techniques d' Armement (ENSIETA), 2 Rue Francois Verny, 29806 Brest Cedex 9 (France); Lamnabhi-Lagarrigue, F. [Laboratoire des Signaux et Systemes (L2S), C.N.R.S-SUPELEC, Universite Paris XI, 3 Rue Joliot Curie, 91192 Gif-sur-Yvette (France); Arzande, Amir [Departement Energie, Ecole Superieure d' Electricite-SUPELEC, 3 Rue Joliot Curie, 91192 Gif-sur-Yvette (France)

    2008-11-15

    In this paper, an algorithm for time-varying parameter estimation for a large class of nonlinear systems is presented. The proof of the convergence of the estimates to their true values is achieved using Lyapunov theories and does not require that the classical persistent excitation condition be satisfied by the input signal. Since the induction motor (IM) is widely used in several industrial sectors, the algorithm developed is potentially useful for adjusting the controller parameters of variable speed drives. The method proposed is simple and easily implementable in real-time. The application of this approach to on-line estimation of the rotor resistance of IM shows a rapidly converging estimate in spite of measurement noise, discretization effects, parameter uncertainties (e.g. inaccuracies on motor inductance values) and modeling inaccuracies. The robustness analysis for this IM application also revealed that the proposed scheme is insensitive to the stator resistance variations within a wide range. The merits of the proposed algorithm in the case of on-line time-varying rotor resistance estimation are demonstrated via experimental results in various operating conditions of the induction motor. The experimental results obtained demonstrate that the application of the proposed algorithm to update on-line the parameters of an adaptive controller (e.g. IM and synchronous machines adaptive control) can improve the efficiency of the industrial process. The other interesting features of the proposed method include fault detection/estimation and adaptive control of IM and synchronous machines. (author)

  18. Bonus Schemes and Trading Activity

    NARCIS (Netherlands)

    Pikulina, E.S.; Renneboog, L.D.R.; Ter Horst, J.R.; Tobler, P.N.

    2013-01-01

    Abstract: Little is known about how different bonus schemes affect traders’ propensity to trade and which bonus schemes improve traders’ performance. We study the effects of linear versus threshold (convex) bonus schemes on traders’ behavior. Traders purchase and sell shares in an experimental stock

  19. Bonus schemes and trading activity

    NARCIS (Netherlands)

    Pikulina, E.S.; Renneboog, L.D.R.; ter Horst, J.R.; Tobler, P.N.

    2014-01-01

    Little is known about how different bonus schemes affect traders' propensity to trade and which bonus schemes improve traders' performance. We study the effects of linear versus threshold bonus schemes on traders' behavior. Traders buy and sell shares in an experimental stock market on the basis of

  20. ANN Speed Sensorless Fuzzy Control of DRFOC Induction Motor Drives

    Directory of Open Access Journals (Sweden)

    Mouna BEN HAMED

    2010-12-01

    Full Text Available The aim of this paper is to present a full digital implementation of a sensorless speed direct orientation field controlled induction motor drive. Thanks to their advantages, the fuzzy logic is used to control the Squirrel Cage Induction Motor rotor speed and a neural network is used to reconstruct it. Experimental results for a 1kw induction motor are presented and analyzed using a dSpace system with DS1104 controller board based on digital signal processors (DSP. Obtained results demonstrated that the proposed sensorless control scheme is able to obtain high performances.

  1. A Brushless Three-phase Synchronous Induction Motor with Two Stators

    OpenAIRE

    Inoue, Kenji; Yamashita, Hideo; Ohnogi, Yukio; Cingoski, Vlatko

    1993-01-01

    In this paper, a brushless three-phase synchronous induction motor with two stators which can self-start as a wound-rotor induction motor without external secondary resistance is proposed. In the proposed motor, two excitation schemes, separately and self-ones, can be realized. In the separately excitation scheme, the proposed machine can operate as a synchronous generator-motor. The proposed machine compared with traditional brushless synchronous motor with AC exciter has the following advan...

  2. Rapid and long-term induction of effector immediate early genes (BDNF, Neuritin and Arc) in peri-infarct cortex and dentate gyrus after ischemic injury in rat brain

    DEFF Research Database (Denmark)

    Rickhag, Karl Mattias; Teilum, Maria; Wieloch, Tadeusz

    2007-01-01

    The genomic response following brain ischemia is very complex and involves activation of both protective and detrimental signaling pathways. Immediate early genes (IEGs) represent the first wave of gene expression following ischemia and are induced in extensive regions of the ischemic brain...... including cerebral cortex and hippocampus. Brain-derived neurotrophic factor (BDNF), Neuritin and Activity-regulated cytoskeleton-associated protein (Arc) belong to a subgroup of immediate early genes implicated in synaptic plasticity known as effector immediate early genes. Here, we investigated...... at 0-6 h of reperfusion for Neuritin and 0-12 h of reperfusion for Arc while BDNF was induced 0-9 h of reperfusion. Our study demonstrates a rapid and long-term activation of effector immediate early genes in distinct brain areas following ischemic injury in rat. Effector gene activation may be part...

  3. Design and Comparison Direct Torque Control Techniques for Induction Motors

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Kazmierkowski, Marian P.; Zelechowski, Marcin

    2005-01-01

    In this paper a comparison of two significant control methods of induction motor are presented. The first one is a classical Direct Torque and Flux Control (DTC) and is compared with a scheme, which uses Space Vector Modulator (DTC-SVM). A comparison in respect to dynamic and steady state...

  4. Small-scale classification schemes

    DEFF Research Database (Denmark)

    Hertzum, Morten

    2004-01-01

    Small-scale classification schemes are used extensively in the coordination of cooperative work. This study investigates the creation and use of a classification scheme for handling the system requirements during the redevelopment of a nation-wide information system. This requirements classificat....... This difference between the written requirements specification and the oral discussions at the meetings may help explain software engineers’ general preference for people, rather than documents, as their information sources.......Small-scale classification schemes are used extensively in the coordination of cooperative work. This study investigates the creation and use of a classification scheme for handling the system requirements during the redevelopment of a nation-wide information system. This requirements....... While coordination mechanisms focus on how classification schemes enable cooperation among people pursuing a common goal, boundary objects embrace the implicit consequences of classification schemes in situations involving conflicting goals. Moreover, the requirements specification focused on functional...

  5. Induction Therapy for Mesothelioma.

    Science.gov (United States)

    Opitz, Isabelle; Weder, Walter

    2015-01-01

    One particular approach of multimodality treatment for mesothelioma is induction therapy followed by surgery. Among its several advantages, the most important is downstaging of the tumor into a resectable stage, although morbidity and mortality might be increased. In this article we review the principles and outcome of different modalities for induction treatment of mesothelioma. Copyright © 2015 Elsevier Inc. All rights reserved.

  6. Two notes about Ponzi schemes

    OpenAIRE

    Honohan, Patrick

    1987-01-01

    A Ponzi scheme is an arrangement whereby a promoter offers an investment opportunity with attractive dividends, but where the only basis for the dividends is the future receipts from new investors. The first of these two notes explores some of the analytical properties of a Ponzi scheme, addressing in particular the question whether it is possible for a Ponzi scheme to exist if all the participants are rational. The second note briefly examines the collapse of the PMPA insurance company whos...

  7. Progress in Induction Linacs

    Energy Technology Data Exchange (ETDEWEB)

    Caporaso, G J

    2000-09-27

    This presentation will be a broad survey of progress in induction technology over the past four years. Much work has been done on accelerators for hydrodynamic test radiography and other applications. Solid-state pulsers have been developed which can provide unprecedented flexibility and precision in pulse format and accelerating voltage for both ion and electron induction machines. Induction linacs can now be built which can operate with MHz repetition rates. Solid-state technology has also made possible the development of fast kickers for precision control of high current beams. New insulator technology has been developed which will improve conventional induction linacs in addition to enabling a new class of high gradient induction linacs.

  8. Remarks on quantum duopoly schemes

    Science.gov (United States)

    Fraçkiewicz, Piotr

    2016-01-01

    The aim of this paper is to discuss in some detail the two different quantum schemes for duopoly problems. We investigate under what conditions one of the schemes is more reasonable than the other one. Using the Cournot's duopoly example, we show that the current quantum schemes require a slight refinement so that they output the classical game in a particular case. Then, we show how the amendment changes the way of studying the quantum games with respect to Nash equilibria. Finally, we define another scheme for the Cournot's duopoly in terms of quantum computation.

  9. New Ideas on Labeling Schemes

    DEFF Research Database (Denmark)

    Rotbart, Noy Galil

    times, effectively eliminating the second penalty mentioned. We continue this theoretical study in several ways. First, we dedicate a large part of the thesis to the graph family of trees, for which we provide an overview of labeling schemes supporting several important functions such as ancestry......, routing and especially adjacency. The survey is complemented by novel contributions to this study, among which are the first asymptotically optimal adjacency labeling scheme for bounded degree trees, improved bounds on ancestry labeling schemes, dynamic multifunctional labeling schemes and an experimental...

  10. Fuzzy Logic Temperature Control System For The Induction Furnace

    Directory of Open Access Journals (Sweden)

    Lei Lei Hnin

    2015-08-01

    Full Text Available This research paper describes the fuzzy logic temperature control system of the induction furnace. Temperature requirement of the heating system varies during the heating process. In the conventional control schemes the switching losses increase with the change in the load. A closed loop control is required to have a smooth control on the system. In this system pulse width modulation based power control scheme for the induction heating system is developed using the fuzzy logic controller. The induction furnace requires a good voltage regulation to have efficient response. The controller controls the temperature depending upon weight of meat water and time. This control system is implemented in hardware system using microcontroller. Here the fuzzy logic controller is designed and simulated in MATLAB to get the desire condition.

  11. A dynamic identity based authentication scheme using chaotic maps for telecare medicine information systems.

    Science.gov (United States)

    Wang, Zhiheng; Huo, Zhanqiang; Shi, Wenbo

    2015-01-01

    With rapid development of computer technology and wide use of mobile devices, the telecare medicine information system has become universal in the field of medical care. To protect patients' privacy and medial data's security, many authentication schemes for the telecare medicine information system have been proposed. Due to its better performance, chaotic maps have been used in the design of authentication schemes for the telecare medicine information system. However, most of them cannot provide user's anonymity. Recently, Lin proposed a dynamic identity based authentication scheme using chaotic maps for the telecare medicine information system and claimed that their scheme was secure against existential active attacks. In this paper, we will demonstrate that their scheme cannot provide user anonymity and is vulnerable to the impersonation attack. Further, we propose an improved scheme to fix security flaws in Lin's scheme and demonstrate the proposed scheme could withstand various attacks.

  12. Self-integrating inductive loop for measuring high frequency pulses.

    Science.gov (United States)

    Rojas-Moreno, Mónica V; Robles, Guillermo; Martínez-Tarifa, Juan M; Sanz-Feito, Javier

    2011-08-01

    High frequency pulses can be measured by means of inductive sensors. The main advantage of these sensors consists of non-contact measurements that isolate and protect measuring equipment. The objective of this paper is to present the implementation of an inductive sensor for measuring rapidly varying currents. It consists of a rectangular loop with a resistor at its terminals. The inductive loop gives the derivative of the current according to Faraday's law and the resistor connected to the loop modifies the sensor's frequency response to obtain an output proportional to the current pulse. The self-integrating inductive sensor was validated with two sensors, a non-inductive resistor and a commercial high frequency current transformer. The results were compared to determine the advantages and drawbacks of the probe as an adequate inductive transducer.

  13. A real helper data scheme

    NARCIS (Netherlands)

    Shao, X.; Veldhuis, Raymond N.J.

    2013-01-01

    The helper data scheme utilizes a secret key to protect biometric templates. The current helper data scheme requires binary feature representations that introduce quantization error and thus reduce the capacity of biometric channels. For spectral-minutiae based fingerprint recognition systems,

  14. CANONICAL BACKWARD DIFFERENTIATION SCHEMES FOR ...

    African Journals Online (AJOL)

    This paper describes a new nonlinear backward differentiation schemes for the numerical solution of nonlinear initial value problems of first order ordinary differential equations. The schemes are based on rational interpolation obtained from canonical polynomials. They are A-stable. The test problems show that they give ...

  15. Multiuser Switched Diversity Scheduling Schemes

    CERN Document Server

    Shaqfeh, Mohammad; Alouini, Mohamed-Slim

    2012-01-01

    Multiuser switched-diversity scheduling schemes were recently proposed in order to overcome the heavy feedback requirements of conventional opportunistic scheduling schemes by applying a threshold-based, distributed, and ordered scheduling mechanism. The main idea behind these schemes is that slight reduction in the prospected multiuser diversity gains is an acceptable trade-off for great savings in terms of required channel-state-information feedback messages. In this work, we characterize the achievable rate region of multiuser switched diversity systems and compare it with the rate region of full feedback multiuser diversity systems. We propose also a novel proportional fair multiuser switched-based scheduling scheme and we demonstrate that it can be optimized using a practical and distributed method to obtain the feedback thresholds. We finally demonstrate by numerical examples that switched-diversity scheduling schemes operate within 0.3 bits/sec/Hz from the ultimate network capacity of full feedback sys...

  16. Backstepping Strategy for Induction Motor Control

    DEFF Research Database (Denmark)

    Rasmussen, Henrik; Vadstrup, P.; Børsting, H.

    2000-01-01

    Using backstepping, which is a recursive nonlinear design method, a novel approach to control of induction motors is developed. The resulting scheme leads to a nonlinear controller for the torque and the amplitude of the field. A combination of nonlinear damping and observer backstepping...... with a simple flux observer is used in the design. Assuming known motor parameters the design achieves stability with guaranteed region of attraction. It is also shown how a conventional field oriented controller may be obtained by omitting parts of the nonlinear controller....

  17. Induction melter apparatus

    Science.gov (United States)

    Roach, Jay A [Idaho Falls, ID; Richardson, John G [Idaho Falls, ID; Raivo, Brian D [Idaho Falls, ID; Soelberg, Nicholas R [Idaho Falls, ID

    2008-06-17

    Apparatus and methods of operation are provided for a cold-crucible-induction melter for vitrifying waste wherein a single induction power supply may be used to effect a selected thermal distribution by independently energizing at least two inductors. Also, a bottom drain assembly may be heated by an inductor and may include an electrically resistive heater. The bottom drain assembly may be cooled to solidify molten material passing therethrough to prevent discharge of molten material therefrom. Configurations are provided wherein the induction flux skin depth substantially corresponds with the central longitudinal axis of the crucible. Further, the drain tube may be positioned within the induction flux skin depth in relation to material within the crucible or may be substantially aligned with a direction of flow of molten material within the crucible. An improved head design including four shells forming thermal radiation shields and at least two gas-cooled plenums is also disclosed.

  18. Thermal kinetic inductance detector

    Science.gov (United States)

    Cecil, Thomas; Gades, Lisa; Miceli, Antonio; Quaranta, Orlando

    2016-12-20

    A microcalorimeter for radiation detection that uses superconducting kinetic inductance resonators as the thermometers. The detector is frequency-multiplexed which enables detector systems with a large number of pixels.

  19. Coordinated renewable energy support schemes

    DEFF Research Database (Denmark)

    Morthorst, P.E.; Jensen, S.G.

    2006-01-01

    This paper illustrates the effect that can be observed when support schemes for renewable energy are regionalised. Two theoretical examples are used to explain interactive effects on, e.g., the price of power, conditions for conventional power producers, and changes in import and export of power...... RES-E support schemes already has a common liberalised power market. In this case the introduction of a common support scheme for renewable technologies will lead to more efficient sitings of renewable plants, improving economic and environmental performance of the total power system...

  20. 1-1-12 one-step wash-in scheme for desflurane low flow anesthesia: performance without nitrous oxide

    Directory of Open Access Journals (Sweden)

    Sathitkarnmanee T

    2015-02-01

    Full Text Available Thepakorn Sathitkarnmanee, Sirirat Tribuddharat, Duangthida Nonlhaopol, Maneerat Thananun, Wilawan Somdee Department of Anesthesiology, Faculty of Medicine, Khon Kaen University, Khon Kaen, Thailand Background: We reported a 1-1-12 wash-in scheme for desflurane-nitrous oxide (N2O low flow anesthesia that is simple, rapid, and predictable. There remain some situations where N2O should be avoided, which limits the generalizability of this wash-in scheme. The objective of our study was to determine the performance of this scheme in contexts where N2O is not used.Methods: We recruited 106 patients scheduled for elective surgery under general anesthesia. After induction and intubation, wash-in was started with a fresh gas flow of air:O2 1:1 L/min and a vaporizer concentration of desflurane of 12%. Controlled ventilation was then adjusted to maintain PACO2 at 30–35 mmHg.Results: The alveolar concentration of desflurane (FAD rose rapidly from 0% to 6% in 4 minutes in the same pattern as observed in our previous study in which N2O was used. An FAD of 7% was achieved in 6 minutes. An FAD of 1% to 7% occurred at 0.6, 1, 1.5, 2, 3, 4, and 6 minutes. The rise in heart rate during wash-in was statistically significant, although not clinically so. There was a slight but statistically significant decrease in blood pressure, but this had no clinical significance.Conclusion: Performance of the 1-1-12 wash-in scheme is independent of the use of N2O. Respective FADs of 1%, 2%, 3%, 4%, 5%, 6%, and 7% can be expected at 0.6, 1, 1.5, 2, 3, 4, and 6 minutes. Keywords: low flow anesthesia, wash-in, desflurane, air

  1. Inductively Heated Shape Memory Polymer for the Magnetic Actuation of Medical Devices

    Energy Technology Data Exchange (ETDEWEB)

    Buckley, P; Mckinley, G; Wilson, T; Small, W; Benett, W; Bearinger, J; McElfresh, M; Maitland, D

    2005-09-06

    Presently there is interest in making medical devices such as expandable stents and intravascular microactuators from shape memory polymer (SMP). One of the key challenges in realizing SMP medical devices is the implementation of a safe and effective method of thermally actuating various device geometries in vivo. A novel scheme of actuation by Curie-thermoregulated inductive heating is presented. Prototype medical devices made from SMP loaded with Nickel Zinc ferrite ferromagnetic particles were actuated in air by applying an alternating magnetic field to induce heating. Dynamic mechanical thermal analysis was performed on both the particle-loaded and neat SMP materials to assess the impact of the ferrite particles on the mechanical properties of the samples. Calorimetry was used to quantify the rate of heat generation as a function of particle size and volumetric loading of ferrite particles in the SMP. These tests demonstrated the feasibility of SMP actuation by inductive heating. Rapid and uniform heating was achieved in complex device geometries and particle loading up to 10% volume content did not interfere with the shape recovery of the SMP.

  2. Induction in a Modular Learner.

    Science.gov (United States)

    Carroll, Susanne E.

    2002-01-01

    Presents a theory of inductive learning--Autonomous Induction Theory--a form of induction that takes place within the autonomous and modular representational systems of the language faculty. Argues that Autonomous Induction Theory is constrained enough to be taken seriously as a plausible approach to explaining second language acquisition.…

  3. A Novel Iris Segmentation Scheme

    Directory of Open Access Journals (Sweden)

    Chen-Chung Liu

    2014-01-01

    Full Text Available One of the key steps in the iris recognition system is the accurate iris segmentation from its surrounding noises including pupil, sclera, eyelashes, and eyebrows of a captured eye-image. This paper presents a novel iris segmentation scheme which utilizes the orientation matching transform to outline the outer and inner iris boundaries initially. It then employs Delogne-Kåsa circle fitting (instead of the traditional Hough transform to further eliminate the outlier points to extract a more precise iris area from an eye-image. In the extracted iris region, the proposed scheme further utilizes the differences in the intensity and positional characteristics of the iris, eyelid, and eyelashes to detect and delete these noises. The scheme is then applied on iris image database, UBIRIS.v1. The experimental results show that the presented scheme provides a more effective and efficient iris segmentation than other conventional methods.

  4. Good governance for pension schemes

    CERN Document Server

    Thornton, Paul

    2011-01-01

    Regulatory and market developments have transformed the way in which UK private sector pension schemes operate. This has increased demands on trustees and advisors and the trusteeship governance model must evolve in order to remain fit for purpose. This volume brings together leading practitioners to provide an overview of what today constitutes good governance for pension schemes, from both a legal and a practical perspective. It provides the reader with an appreciation of the distinctive characteristics of UK occupational pension schemes, how they sit within the capital markets and their social and fiduciary responsibilities. Providing a holistic analysis of pension risk, both from the trustee and the corporate perspective, the essays cover the crucial role of the employer covenant, financing and investment risk, developments in longevity risk hedging and insurance de-risking, and best practice scheme administration.

  5. Breeding schemes in reindeer husbandry

    Directory of Open Access Journals (Sweden)

    Lars Rönnegård

    2003-04-01

    Full Text Available The objective of the paper was to investigate annual genetic gain from selection (G, and the influence of selection on the inbreeding effective population size (Ne, for different possible breeding schemes within a reindeer herding district. The breeding schemes were analysed for different proportions of the population within a herding district included in the selection programme. Two different breeding schemes were analysed: an open nucleus scheme where males mix and mate between owner flocks, and a closed nucleus scheme where the males in non-selected owner flocks are culled to maximise G in the whole population. The theory of expected long-term genetic contributions was used and maternal effects were included in the analyses. Realistic parameter values were used for the population, modelled with 5000 reindeer in the population and a sex ratio of 14 adult females per male. The standard deviation of calf weights was 4.1 kg. Four different situations were explored and the results showed: 1. When the population was randomly culled, Ne equalled 2400. 2. When the whole population was selected on calf weights, Ne equalled 1700 and the total annual genetic gain (direct + maternal in calf weight was 0.42 kg. 3. For the open nucleus scheme, G increased monotonically from 0 to 0.42 kg as the proportion of the population included in the selection programme increased from 0 to 1.0, and Ne decreased correspondingly from 2400 to 1700. 4. In the closed nucleus scheme the lowest value of Ne was 1300. For a given proportion of the population included in the selection programme, the difference in G between a closed nucleus scheme and an open one was up to 0.13 kg. We conclude that for mass selection based on calf weights in herding districts with 2000 animals or more, there are no risks of inbreeding effects caused by selection.

  6. Uncertainty of Microphysics Schemes in CRMs

    Science.gov (United States)

    Tao, W. K.; van den Heever, S. C.; Wu, D.; Saleeby, S. M.; Lang, S. E.

    2015-12-01

    Microphysics is the framework through which to understand the links between interactive aerosol, cloud and precipitation processes. These processes play a critical role in the water and energy cycle. CRMs with advanced microphysics schemes have been used to study the interaction between aerosol, cloud and precipitation processes at high resolution. But, there are still many uncertainties associated with these microphysics schemes. This has arisen, in part, from the fact microphysical processes cannot be measured directly; instead, cloud properties, which can be measured, are and have been used to validate model results. The utilization of current and future global high-resolution models is rapidly increasing and are at what has been traditional CRM resolutions and are using microphysics schemes that were developed in traditional CRMs. A potential NASA satellite mission called the Cloud and Precipitation Processes Mission (CaPPM) is currently being planned for submission to the NASA Earth Science Decadal Survey. This mission could provide the necessary global estimates of cloud and precipitation properties with which to evaluate and improve dynamical and microphysical parameterizations and the feedbacks. In order to facilitate the development of this mission, CRM simulations have been conducted to identify microphysical processes responsible for the greatest uncertainties in CRMs. In this talk, we will present results from numerical simulations conducted using two CRMs (NU-WRF and RAMS) with different dynamics, radiation, land surface and microphysics schemes. Specifically, we will conduct sensitivity tests to examine the uncertainty of the some of the key ice processes (i.e. riming, melting, freezing and shedding) in these two-microphysics schemes. The idea is to quantify how these two different models' respond (surface rainfall and its intensity, strength of cloud drafts, LWP/IWP, convective-stratiform-anvil area distribution) to changes of these key ice

  7. Paramedic rapid sequence induction (RSI) in a South African ...

    African Journals Online (AJOL)

    Female patients (odds ratio (OR) 18.3; 95% confidence interval (CI) 3.46 - 99.38; p=0.001) and patients subsequently transported by helicopter (OR 7.24; 95% CI 1.44 - 36.32; p=0.016) remained independently associated with AEs after adjusting for confounders. Conclusions. RSI performed by specially trained paramedics ...

  8. Transgenerational defense induction and epigenetic inheritance in plants.

    Science.gov (United States)

    Holeski, Liza M; Jander, Georg; Agrawal, Anurag A

    2012-11-01

    Rapidly accumulating evidence shows that herbivore and pathogen attack of plants can generate particular defense phenotypes across generations. What was once thought to be an oddity of plant defense induction now appears to be a taxonomically widespread phenomenon with strong potential to impact the ecology and evolution of species interactions. DNA methylation, histone modifications, and small RNAs each contribute to transgenerational defense initiation; examples in several species demonstrate that this induction can last for multiple generations. Priming of the offspring generation for more rapid induction following subsequent attack has also been reported. The extent to which transgenerational induction is predictable, detectable in nature, and subject to manipulation will determine the ability of researchers to decipher its role in plant-herbivore and plant-pathogen interactions. Copyright © 2012 Elsevier Ltd. All rights reserved.

  9. Induction and Natural Kinds

    Directory of Open Access Journals (Sweden)

    Howard Sankey

    1997-12-01

    Full Text Available The paper sketches an ontological solution to an epistemological problem in the philosophy of science. Taking the work of Hilary Kornblith and Brian Ellis as a point of departure, it presents a realist solution to the Humean problem of induction, which is based on a scientific essentialist interpretation of the principle of the uniformity of nature. More specifically, it is argued that use of inductive inference in science is rationally justified because of the existence of real, natural kinds of things, which are characterized as such by the essential properties which all members of a kind necessarily possess in common. The proposed response to inductive scepticism combines the insights of epistemic naturalism with a metaphysical outlook that is due to s cientific realism.

  10. On the security of two remote user authentication schemes for telecare medical information systems.

    Science.gov (United States)

    Kim, Kee-Won; Lee, Jae-Dong

    2014-05-01

    The telecare medical information systems (TMISs) support convenient and rapid health-care services. A secure and efficient authentication scheme for TMIS provides safeguarding patients' electronic patient records (EPRs) and helps health care workers and medical personnel to rapidly making correct clinical decisions. Recently, Kumari et al. proposed a password based user authentication scheme using smart cards for TMIS, and claimed that the proposed scheme could resist various malicious attacks. However, we point out that their scheme is still vulnerable to lost smart card and cannot provide forward secrecy. Subsequently, Das and Goswami proposed a secure and efficient uniqueness-and-anonymity-preserving remote user authentication scheme for connected health care. They simulated their scheme for the formal security verification using the widely-accepted automated validation of Internet security protocols and applications (AVISPA) tool to ensure that their scheme is secure against passive and active attacks. However, we show that their scheme is still vulnerable to smart card loss attacks and cannot provide forward secrecy property. The proposed cryptanalysis discourages any use of the two schemes under investigation in practice and reveals some subtleties and challenges in designing this type of schemes.

  11. Inductive dielectric analyzer

    Science.gov (United States)

    Agranovich, Daniel; Polygalov, Eugene; Popov, Ivan; Ben Ishai, Paul; Feldman, Yuri

    2017-03-01

    One of the approaches to bypass the problem of electrode polarization in dielectric measurements is the free electrode method. The advantage of this technique is that, the probing electric field in the material is not supplied by contact electrodes, but rather by electromagnetic induction. We have designed an inductive dielectric analyzer based on a sensor comprising two concentric toroidal coils. In this work, we present an analytic derivation of the relationship between the impedance measured by the sensor and the complex dielectric permittivity of the sample. The obtained relationship was successfully employed to measure the dielectric permittivity and conductivity of various alcohols and aqueous salt solutions.

  12. A Remote User Authentication Scheme with Anonymity for Mobile Devices

    Directory of Open Access Journals (Sweden)

    Soobok Shin

    2012-04-01

    Full Text Available With the rapid growth of information technologies, mobile devices have been utilized in a variety of services such as e-commerce. When a remote server provides such e-commerce services to a user, it must verify the legitimacy of the user over an insecure communication channel. Therefore, remote user authentication has been widely deployed to verify the legitimacy of remote user login requests using mobile devices like smart cards. In this paper we propose a smart card-based authentication scheme that provides both user anonymity and mutual authentication between a remote server and a user. The proposed authentication scheme is a simple and efficient system applicable to the limited resource and low computing performance of the smart card. The proposed scheme provides not only resilience to potential attacks in the smart card-based authentication scheme, but also secure authentication functions. A smart card performs a simple one-way hash function, the operations of exclusive-or and concatenation in the authentication phase of the proposed scheme. The proposed scheme also provides user anonymity using a dynamic identity and key agreement, and secure password change.

  13. Discrete-Time LPV Current Control of an Induction Motor

    DEFF Research Database (Denmark)

    Bendtsen, Jan Dimon; Trangbæk, Klaus

    2003-01-01

    In this paper we apply a new method for gain-scheduled output feedback control of nonlinear systems to current control of an induction motor. The method relies on recently developed controller synthesis results for linear parameter-varying (LPV) systems, where the controller synthesis is formulated...... further complications. The synthesis method is applied to the model, yielding an LPV discrete-time controller. Finally, the efficiency of the control scheme is validated via simulations as well as on the actual induction motor, both in open-loop current control and when an outer speed control loop...

  14. Analysis on Inductance and Torque of PMSM Considering Magnetic Saturation

    Science.gov (United States)

    Cao, Xiao-Hua; Wang, Xin; Wei, Heng

    2017-07-01

    This paper analyses the surface-mounted PMSM which controlled by Id=0 vector control based on Ansoft in which finite element simulation of 2D static magnetic field can be operated on, then calculating and analysing the data with MATLAB, and then operating on the analysis of the change law of torque and inductance under different load conditions, and then paying more attention on the impact of magnetic saturation to torque and inductance. With the analysis of magnetic saturation, this paper puts forward a scheme of control and design used by PMSM.

  15. Improvement the DTC system for electric vehicles induction motors

    Directory of Open Access Journals (Sweden)

    Arif Ali

    2010-01-01

    Full Text Available A three-phase squirrel-cage induction motor is used as a propulsion system of an electric vehicle (EV. Two different control methods have been designed. The first is based on the conventional DTC Scheme adapted for three level inverter. The second is based on the application of fuzzy logic controller to the DTC scheme. The motor is controlled at different operating conditions using a FLC based DTC technique. In the simulation the novel proposed technique reduces the torque and current ripples. The EV dynamics are taken into account.

  16. Rapid imaging of free radicals in vivo using field cycled PEDRI.

    Science.gov (United States)

    Puwanich, P; Lurie, D J; Foster, M A

    1999-12-01

    Imaging of free radicals in vivo using an interleaved field-cycled proton-electron double-resonance imaging (FC-PEDRI) pulse sequence has recently been investigated. In this work, in order to reduce the EPR (electron paramagnetic resonance) irradiation power required and the imaging time, a centric reordered snapshot FC-PEDRI pulse sequence has been implemented. This is based on the FLASH pulse sequence with a very short repetition time and the use of centric reordering of the phase-encoding gradient, allowing the most significant free induction decay (FID) signals to be collected before the signal enhancement decays significantly. A new technique of signal phaseshift correction was required to eliminate ghost artefacts caused by the instability of the main magnetic field after field cycling. An FID amplitude correction scheme has also been implemented to reduce edge enhancement artefacts caused by the rapid change of magnetization population before reaching the steady state. Using the rapid pulse sequence, the time required for acquisition of a 64 x 64 pixel FC-PEDRI image was reduced to 6 s per image compared with about 2.5 min with the conventional pulse sequence. The EPR irradiation power applied to the sample was reduced by a factor of approximately 64. Although the resulting images obtained by the rapid pulse sequence have a lower signal to noise than those obtained by a normal interleaved FC-PEDRI pulse sequence, the results show that rapid imaging of free radicals in vivo using snapshot FC-PEDRI is possible.

  17. Multiuser switched diversity scheduling schemes

    KAUST Repository

    Shaqfeh, Mohammad

    2012-09-01

    Multiuser switched-diversity scheduling schemes were recently proposed in order to overcome the heavy feedback requirements of conventional opportunistic scheduling schemes by applying a threshold-based, distributed, and ordered scheduling mechanism. The main idea behind these schemes is that slight reduction in the prospected multiuser diversity gains is an acceptable trade-off for great savings in terms of required channel-state-information feedback messages. In this work, we characterize the achievable rate region of multiuser switched diversity systems and compare it with the rate region of full feedback multiuser diversity systems. We propose also a novel proportional fair multiuser switched-based scheduling scheme and we demonstrate that it can be optimized using a practical and distributed method to obtain the feedback thresholds. We finally demonstrate by numerical examples that switched-diversity scheduling schemes operate within 0.3 bits/sec/Hz from the ultimate network capacity of full feedback systems in Rayleigh fading conditions. © 2012 IEEE.

  18. Ultraregular inductive limits

    Directory of Open Access Journals (Sweden)

    Jan Kucera

    1990-01-01

    Full Text Available An inductive limit E=indlim En is ultraregular if it is regular and each set B⊂En, which is bounded in E, is also bounded in En. A necessary and sufficient condition for ultraregularity of E is given provided each En is an LF-space which is closed in En+1.

  19. Modeling Induction Motor Imbalances

    DEFF Research Database (Denmark)

    Armah, Kabenla; Jouffroy, Jerome; Duggen, Lars

    2016-01-01

    This paper gives a study into the development of a generalized model for a three-phase induction motor that offers flexibility of simulating balanced and unbalanced parameter scenarios. By analyzing the interaction of forces within the motor, we achieve our main objective of deriving the system...

  20. Using Continuity Induction

    Science.gov (United States)

    Hathaway, Dan

    2011-01-01

    Here is a technique for proving the fundamental theorems of analysis that provides a unified way to pass from local properties to global properties on the real line, just as ordinary induction passes from local implication (if true for "k", the theorem is true for "k" + 1) to a global conclusion in the natural numbers.

  1. Design of Infusion Schemes for Neuroreceptor Imaging

    DEFF Research Database (Denmark)

    Feng, Ling; Svarer, Claus; Madsen, Karine

    2016-01-01

    for bolus infusion (BI) or programmed infusion (PI) experiments. Steady-state quantitative measurements can be made with one short scan and venous blood samples. The GABAA receptor ligand [(11)C]Flumazenil (FMZ) was chosen for this purpose, as it lacks a suitable reference region. Methods. Five bolus [(11)C...... state was attained within 40 min, which was 8 min earlier than the optimal BI (B/I ratio = 55 min). Conclusions. The system can design both BI and PI schemes to attain steady state rapidly. For example, subjects can be [(11)C]FMZ-PET scanned after 40 min of tracer infusion for 40 min with venous...

  2. Modulation Schemes for Wireless Access

    Directory of Open Access Journals (Sweden)

    F. Vejrazka

    2000-12-01

    Full Text Available Four modulation schemes, namely minimum shift keying (MSK, Gaussianminimum shift keying (GMSK, multiamplitude minimum shift keying(MAMSK and π/4 differential quadrature phase shift keying (π/4-QPSKare described and their applicability to wireless access is discussedin the paper. Low complexity receiver structures based on differentialdetection are analysed to estimate the performance of the modulationschemes in the additive Gaussian noise and the Rayleigh and Riceenvelope fast fading channel. The bandwidth efficiency is calculated toevaluate the modulation schemes. The results show that the MAMSK schemegives the greatest bandwidth efficiency, but its performance in theRayleigh channel is rather poor. In contrast, the MSK scheme is lessbandwidth efficient, but it is more resistant to Rayleigh fading. Theperformance of π/4-QPSK signal is considerably improved by appropriateprefiltering.

  3. Rapid Prototyping

    Science.gov (United States)

    1999-01-01

    Javelin, a Lone Peak Engineering Inc. Company has introduced the SteamRoller(TM) System as a commercial product. The system was designed by Javelin during a Phase II NASA funded small commercial product. The purpose of the invention was to allow automated-feed of flexible ceramic tapes to the Laminated Object Manufacturing rapid prototyping equipment. The ceramic material that Javelin was working with during the Phase II project is silicon nitride. This engineered ceramic material is of interest for space-based component.

  4. A secure and efficient password-based user authentication scheme using smart cards for the integrated EPR information system.

    Science.gov (United States)

    Lee, Tian-Fu; Chang, I-Pin; Lin, Tsung-Hung; Wang, Ching-Cheng

    2013-06-01

    The integrated EPR information system supports convenient and rapid e-medicine services. A secure and efficient authentication scheme for the integrated EPR information system provides safeguarding patients' electronic patient records (EPRs) and helps health care workers and medical personnel to rapidly making correct clinical decisions. Recently, Wu et al. proposed an efficient password-based user authentication scheme using smart cards for the integrated EPR information system, and claimed that the proposed scheme could resist various malicious attacks. However, their scheme is still vulnerable to lost smart card and stolen verifier attacks. This investigation discusses these weaknesses and proposes a secure and efficient authentication scheme for the integrated EPR information system as alternative. Compared with related approaches, the proposed scheme not only retains a lower computational cost and does not require verifier tables for storing users' secrets, but also solves the security problems in previous schemes and withstands possible attacks.

  5. Electrical Injection Schemes for Nanolasers

    DEFF Research Database (Denmark)

    Lupi, Alexandra; Chung, Il-Sug; Yvind, Kresten

    2014-01-01

    Three electrical injection schemes based on recently demonstrated electrically pumped photonic crystal nanolasers have been numerically investigated: 1) a vertical p-i-n junction through a post structure; 2) a lateral p-i-n junction with a homostructure; and 3) a lateral p-i-n junction....... For this analysis, the properties of different schemes, i.e., electrical resistance, threshold voltage, threshold current, and internal efficiency as energy requirements for optical interconnects are compared and the physics behind the differences is discussed....

  6. Efficient Video Streaming Scheme for Next Generations of Mobile Networks

    Directory of Open Access Journals (Sweden)

    Majdi Ashibani

    2005-04-01

    Full Text Available Video streaming over next generations of mobile networks has undergone enormous development recently due to the continuing growth in wireless communication, especially since the emergence of 3G wireless networks. The new generations of wireless networks pose many challenges, including supporting quality of service over wireless communication links. This is due to the time-varying characteristics of wireless channel. Therefore, a more flexible and efficient bandwidth allocation scheme is needed. This paper is a part of ongoing work to come up with a more robust scheme that is capable of rapidly adapting to changes in network conditions. The proposed scheme focuses on the wireless part of the network, providing high quality video service and better utilization of network resources.

  7. Demand power with EV charging schemes considering actual data

    Directory of Open Access Journals (Sweden)

    Jun-Hyeok Kim

    2016-01-01

    Full Text Available Eco-friendly energies have recently become a popular topic. Given this trend, we predict that a large number of electric vehicles (EVs will be widely used. However, EVs need to be connected to a power system for charging, thereby causing severe risks, such as rapid increase of demand power. Therefore, in this study, we analyze the effects of EV charging on demand power, which depend on different charging schemes, namely, dumb charging, off-peak charging, time-of-use (ToU price-based charging. For practical analysis, we conduct simulations by considering the actual power system and driving patterns in South Korea. Simulation results show that the ToU price-based charging scheme exhibits better performance in terms of demand power over the other charging schemes.

  8. Indução anestésica com a técnica de seqüência rápida Inducción anestésica con la técnica de secuencia rápida Rapid sequence induction of anesthesia

    Directory of Open Access Journals (Sweden)

    Eduardo Toshiyuki Moro

    2004-08-01

    inducción con secuencia rápida, enfatizando el uso racional de los hipnóticos, opioides y bloqueadores neuromusculares (BNM, para reducir el período entre la pérdida de la consciencia y el correcto posicionamiento del tubo traqueal, o sea, diminuir el período de mayor riesgo para aspiración y aún mantener excelentes condiciones de intubación traqueal. CONCLUSIONES: La intubación traqueal después de inducción anestésica por medio de la técnica de secuencia rápida está indicada en aquellos pacientes, con riesgo de aspiración gástrica, en que no hay sospecha de intubación traqueal difícil. La indicación correcta de la técnica, su aplicación criteriosa y la utilización racional de las drogas disponibles pueden promover condiciones excelentes de intubación, con corto período de latencia, rápido retorno de la consciencia y de la respiración espontánea, caso haya falla en la intubación traqueal.BACKGROUND AND OBJECTIVES: Rapid sequence induction anesthesia is primarily used to protect airways when there is gastric content aspiration risk. This study aimed at reviewing the technique and different protocols looking for the rational use of available drugs, in the search for ideal tracheal intubation conditions without increasing the risk of gastric content aspiration or other complications. CONTENTS: A technical review of rapid sequence induction of anesthesia is presented, emphasizing the rational use of hypnotics, opioids and neuromuscular blockers (NMB to shorten the period between loss of consciousness and correct tracheal tube positioning, that is, shorten the period of highest risk for aspiration while maintaining excellent intubation conditions. CONCLUSIONS: Tracheal intubation after rapid sequence induction of anesthesia is indicated for patients at risk for gastric content aspiration without suspicion of difficult intubation. The adequate indication of the technique, its judicious application and the rational use of available drugs may promote

  9. Rapid mineralocorticoid receptor trafficking.

    Science.gov (United States)

    Gekle, M; Bretschneider, M; Meinel, S; Ruhs, S; Grossmann, C

    2014-03-01

    The mineralocorticoid receptor (MR) is a ligand-dependent transcription factor that physiologically regulates water-electrolyte homeostasis and controls blood pressure. The MR can also elicit inflammatory and remodeling processes in the cardiovascular system and the kidneys, which require the presence of additional pathological factors like for example nitrosative stress. However, the underlying molecular mechanism(s) for pathophysiological MR effects remain(s) elusive. The inactive MR is located in the cytosol associated with chaperone molecules including HSP90. After ligand binding, the MR monomer rapidly translocates into the nucleus while still being associated to HSP90 and after dissociation from HSP90 binds to hormone-response-elements called glucocorticoid response elements (GREs) as a dimer. There are indications that rapid MR trafficking is modulated in the presence of high salt, oxidative or nitrosative stress, hypothetically by induction or posttranslational modifications. Additionally, glucocorticoids and the enzyme 11beta hydroxysteroid dehydrogenase may also influence MR activation. Because MR trafficking and its modulation by micro-milieu factors influence MR cellular localization, it is not only relevant for genomic but also for nongenomic MR effects. Copyright © 2013 Elsevier Inc. All rights reserved.

  10. Inductive Communication System Design Summary

    Science.gov (United States)

    1978-09-01

    The report documents the experience obtained during the design and development of the Inductive Communications System used in the Morgantown People Mover. The Inductive Communications System is used to provide wayside-to-vehicle and vehicle-to-waysid...

  11. Speed Synchronization of Multi Induction Motors with Fuzzy Sliding Mode Control

    Directory of Open Access Journals (Sweden)

    HACHEMI Glaoui

    2013-05-01

    Full Text Available A continuous web winding system is a large-scale, complex interconnected dynamic system with numerous tension zones to transport the web while processing it. There are two control schemes for large-scale system control: the centralized scheme and the decentralized scheme. Centralized control is the traditional control method, which considers all the information about the system to be a single dynamic model and design a control system for this model. Aspeed synchronization control strategy for multiple induction motors, based on adjacent cross-coupling control structure, is developed by employing total sliding mode control method. The proposed controlstrategy is to stabilize speed tracking of each induction motor while synchronizing its speed with the speed of the other motors so as to make speed synchronization error amongst induction motors converge to zero. The global stability and the convergence of the designedcontroller are proved by using Lyapunov method. Simulation results demonstrate the effectiveness of the proposed method.

  12. Distance labeling schemes for trees

    DEFF Research Database (Denmark)

    Alstrup, Stephen; Gørtz, Inge Li; Bistrup Halvorsen, Esben

    2016-01-01

    We consider distance labeling schemes for trees: given a tree with n nodes, label the nodes with binary strings such that, given the labels of any two nodes, one can determine, by looking only at the labels, the distance in the tree between the two nodes. A lower bound by Gavoille et al. [Gavoill...

  13. Distance labeling schemes for trees

    DEFF Research Database (Denmark)

    Alstrup, Stephen; Gørtz, Inge Li; Bistrup Halvorsen, Esben

    2016-01-01

    (log(n)) bits for constant ε> 0. (1 + ε)-stretch labeling schemes with polylogarithmic label size have previously been established for doubling dimension graphs by Talwar [Talwar, STOC, 2004]. In addition, we present matching upper and lower bounds for distance labeling for caterpillars, showing that labels...

  14. Homogenization scheme for acoustic metamaterials

    KAUST Repository

    Yang, Min

    2014-02-26

    We present a homogenization scheme for acoustic metamaterials that is based on reproducing the lowest orders of scattering amplitudes from a finite volume of metamaterials. This approach is noted to differ significantly from that of coherent potential approximation, which is based on adjusting the effective-medium parameters to minimize scatterings in the long-wavelength limit. With the aid of metamaterials’ eigenstates, the effective parameters, such as mass density and elastic modulus can be obtained by matching the surface responses of a metamaterial\\'s structural unit cell with a piece of homogenized material. From the Green\\'s theorem applied to the exterior domain problem, matching the surface responses is noted to be the same as reproducing the scattering amplitudes. We verify our scheme by applying it to three different examples: a layered lattice, a two-dimensional hexagonal lattice, and a decorated-membrane system. It is shown that the predicted characteristics and wave fields agree almost exactly with numerical simulations and experiments and the scheme\\'s validity is constrained by the number of dominant surface multipoles instead of the usual long-wavelength assumption. In particular, the validity extends to the full band in one dimension and to regimes near the boundaries of the Brillouin zone in two dimensions.

  15. A novel circuit topology of modified switched boost hybrid resonant inverter fitted induction heating equipment

    Directory of Open Access Journals (Sweden)

    Bhattacharya Ananyo

    2016-12-01

    Full Text Available A novel circuit topology of modified switched boost high frequency hybrid resonant inverter fitted induction heating equipment is presented in this paper for efficient induction heating. Recently, induction heating technique is becoming very popular for both domestic and industrial purposes because of its high energy efficiency and controllability. Generally in induction heating, a high frequency alternating magnetic field is required to induce the eddy currents in the work piece. High frequency resonant inverters are incorporated in induction heating equipment which produce a high frequency alternating magnetic field surrounding the coil. Previously this high frequency alternating magnetic field was produced by voltage source inverters. But VSIs have several demerits. So, in this paper, a new scheme of modified switched boost high frequency hybrid resonant inverter fitted induction heating equipment has been depicted which enhances the energy efficiency and controllability and the same is validated by PSIM.

  16. Inductive Supervised Quantum Learning

    Science.gov (United States)

    Monràs, Alex; Sentís, Gael; Wittek, Peter

    2017-05-01

    In supervised learning, an inductive learning algorithm extracts general rules from observed training instances, then the rules are applied to test instances. We show that this splitting of training and application arises naturally, in the classical setting, from a simple independence requirement with a physical interpretation of being nonsignaling. Thus, two seemingly different definitions of inductive learning happen to coincide. This follows from the properties of classical information that break down in the quantum setup. We prove a quantum de Finetti theorem for quantum channels, which shows that in the quantum case, the equivalence holds in the asymptotic setting, that is, for large numbers of test instances. This reveals a natural analogy between classical learning protocols and their quantum counterparts, justifying a similar treatment, and allowing us to inquire about standard elements in computational learning theory, such as structural risk minimization and sample complexity.

  17. Inductive Temporal Logic Programming

    OpenAIRE

    Kolter, Robert

    2009-01-01

    We study the extension of techniques from Inductive Logic Programming (ILP) to temporal logic programming languages. Therefore we present two temporal logic programming languages and analyse the learnability of programs from these languages from finite sets of examples. In first order temporal logic the following topics are analysed: - How can we characterize the denotational semantics of programs? - Which proof techniques are best suited? - How complex is the learning task? In propositional ...

  18. Inductive Pulse Generation

    OpenAIRE

    Lindblom, Adam

    2006-01-01

    Pulsed power generators are a key component in compact systems for generation of high-power microwaves (HPM). HPM generation by virtual cathode devices such as Vircators put high demands on the source. The rise time and the pulse length of the source voltage are two key issues in the generation of HPM radiation. This thesis describes the construction and tests of several inductive high power pulse generators. The pulse generators were designed with the intent to deliver a pulse with fast rise...

  19. Implementation of a new fuzzy vector control of induction motor.

    Science.gov (United States)

    Rafa, Souad; Larabi, Abdelkader; Barazane, Linda; Manceur, Malik; Essounbouli, Najib; Hamzaoui, Abdelaziz

    2014-05-01

    The aim of this paper is to present a new approach to control an induction motor using type-1 fuzzy logic. The induction motor has a nonlinear model, uncertain and strongly coupled. The vector control technique, which is based on the inverse model of the induction motors, solves the coupling problem. Unfortunately, in practice this is not checked because of model uncertainties. Indeed, the presence of the uncertainties led us to use human expertise such as the fuzzy logic techniques. In order to maintain the decoupling and to overcome the problem of the sensitivity to the parametric variations, the field-oriented control is replaced by a new block control. The simulation results show that the both control schemes provide in their basic configuration, comparable performances regarding the decoupling. However, the fuzzy vector control provides the insensitivity to the parametric variations compared to the classical one. The fuzzy vector control scheme is successfully implemented in real-time using a digital signal processor board dSPACE 1104. The efficiency of this technique is verified as well as experimentally at different dynamic operating conditions such as sudden loads change, parameter variations, speed changes, etc. The fuzzy vector control is found to be a best control for application in an induction motor. Copyright © 2014 ISA. Published by Elsevier Ltd. All rights reserved.

  20. Security enhanced multi-factor biometric authentication scheme using bio-hash function.

    Science.gov (United States)

    Choi, Younsung; Lee, Youngsook; Moon, Jongho; Won, Dongho

    2017-01-01

    With the rapid development of personal information and wireless communication technology, user authentication schemes have been crucial to ensure that wireless communications are secure. As such, various authentication schemes with multi-factor authentication have been proposed to improve the security of electronic communications. Multi-factor authentication involves the use of passwords, smart cards, and various biometrics to provide users with the utmost privacy and data protection. Cao and Ge analyzed various authentication schemes and found that Younghwa An's scheme was susceptible to a replay attack where an adversary masquerades as a legal server and a user masquerading attack where user anonymity is not provided, allowing an adversary to execute a password change process by intercepting the user's ID during login. Cao and Ge improved upon Younghwa An's scheme, but various security problems remained. This study demonstrates that Cao and Ge's scheme is susceptible to a biometric recognition error, slow wrong password detection, off-line password attack, user impersonation attack, ID guessing attack, a DoS attack, and that their scheme cannot provide session key agreement. Then, to address all weaknesses identified in Cao and Ge's scheme, this study proposes a security enhanced multi-factor biometric authentication scheme and provides a security analysis and formal analysis using Burrows-Abadi-Needham logic. Finally, the efficiency analysis reveals that the proposed scheme can protect against several possible types of attacks with only a slightly high computational cost.

  1. High-Order Hyperbolic Residual-Distribution Schemes on Arbitrary Triangular Grids

    Science.gov (United States)

    Mazaheri, Alireza; Nishikawa, Hiroaki

    2015-01-01

    In this paper, we construct high-order hyperbolic residual-distribution schemes for general advection-diffusion problems on arbitrary triangular grids. We demonstrate that the second-order accuracy of the hyperbolic schemes can be greatly improved by requiring the scheme to preserve exact quadratic solutions. We also show that the improved second-order scheme can be easily extended to third-order by further requiring the exactness for cubic solutions. We construct these schemes based on the LDA and the SUPG methodology formulated in the framework of the residual-distribution method. For both second- and third-order-schemes, we construct a fully implicit solver by the exact residual Jacobian of the second-order scheme, and demonstrate rapid convergence of 10-15 iterations to reduce the residuals by 10 orders of magnitude. We demonstrate also that these schemes can be constructed based on a separate treatment of the advective and diffusive terms, which paves the way for the construction of hyperbolic residual-distribution schemes for the compressible Navier-Stokes equations. Numerical results show that these schemes produce exceptionally accurate and smooth solution gradients on highly skewed and anisotropic triangular grids, including curved boundary problems, using linear elements. We also present Fourier analysis performed on the constructed linear system and show that an under-relaxation parameter is needed for stabilization of Gauss-Seidel relaxation.

  2. Security enhanced multi-factor biometric authentication scheme using bio-hash function

    Science.gov (United States)

    Lee, Youngsook; Moon, Jongho

    2017-01-01

    With the rapid development of personal information and wireless communication technology, user authentication schemes have been crucial to ensure that wireless communications are secure. As such, various authentication schemes with multi-factor authentication have been proposed to improve the security of electronic communications. Multi-factor authentication involves the use of passwords, smart cards, and various biometrics to provide users with the utmost privacy and data protection. Cao and Ge analyzed various authentication schemes and found that Younghwa An’s scheme was susceptible to a replay attack where an adversary masquerades as a legal server and a user masquerading attack where user anonymity is not provided, allowing an adversary to execute a password change process by intercepting the user’s ID during login. Cao and Ge improved upon Younghwa An’s scheme, but various security problems remained. This study demonstrates that Cao and Ge’s scheme is susceptible to a biometric recognition error, slow wrong password detection, off-line password attack, user impersonation attack, ID guessing attack, a DoS attack, and that their scheme cannot provide session key agreement. Then, to address all weaknesses identified in Cao and Ge’s scheme, this study proposes a security enhanced multi-factor biometric authentication scheme and provides a security analysis and formal analysis using Burrows-Abadi-Needham logic. Finally, the efficiency analysis reveals that the proposed scheme can protect against several possible types of attacks with only a slightly high computational cost. PMID:28459867

  3. [Current aspects of labor induction].

    Science.gov (United States)

    Surbek, D V; Hösli, I; Holzgreve, W

    2002-12-01

    Induction of labor is one of the most important means for therapeutic intervention in modern obstetrics. The aim of labor induction is to achieve a better perinatal result for mother and baby as compared to expectative management. Different methods for induction include administration of oxytocin or prostaglandins, amniotomy, and mechanical means of cervical dilatation. The success of the labor induction depends primarily on the readiness of the uterus to go into labor, and the method used for induction. If the cervical ripeness is very advanced, induction with amniotomy and oxytocin seems beneficial. However if the cervix is not yet ready, intravaginal or intracervical prostaglandins are more promising. Until recently, prostaglandins E2 are used in the first line. Now, the prostaglandin E1-analogon misoprostol is also increasingly used. As a rule, induction of labor should be performed as an inpatient procedure in order to be able to provide the surveillance for maternal and fetal safety.

  4. Coupling WRF Double-Moment 6-Class Microphysics Schemes to RRTMG Radiation Scheme in Weather Research Forecasting Model

    Directory of Open Access Journals (Sweden)

    Soo Ya Bae

    2016-01-01

    Full Text Available A method to explicitly calculate the effective radius of hydrometeors in the Weather Research Forecasting (WRF double-moment 6-class (WDM6 microphysics scheme is designed to tackle the physical inconsistency in cloud properties between the microphysics and radiation processes. At each model time step, the calculated effective radii of hydrometeors from the WDM6 scheme are linked to the Rapid Radiative Transfer Model for GCMs (RRTMG scheme to consider the cloud effects in radiative flux calculation. This coupling effect of cloud properties between the WDM6 and RRTMG algorithms is examined for a heavy rainfall event in Korea during 25–27 July 2011, and it is compared to the results from the control simulation in which the effective radius is prescribed as a constant value. It is found that the derived radii of hydrometeors in the WDM6 scheme are generally larger than the prescribed values in the RRTMG scheme. Consequently, shortwave fluxes reaching the ground (SWDOWN are increased over less cloudy regions, showing a better agreement with a satellite image. The overall distribution of the 24-hour accumulated rainfall is not affected but its amount is changed. A spurious rainfall peak over the Yellow Sea is alleviated, whereas the local maximum in the central part of the peninsula is increased.

  5. Control of Vacuum Induction Brazing System for Sealing of Instrumentation Feedthrough

    Science.gov (United States)

    Ahn, Sung Ho; Hong, Jintae; Joung, Chang Young; Heo, Sung Ho

    2017-04-01

    The integrity of instrumentation cables is an important performance parameter in the brazing process, along with the sealing performance. In this paper, an accurate control scheme for brazing of the instrumentation feedthrough in a vacuum induction brazing system was developed. The experimental results show that the accurate brazing temperature control performance is achieved by the developed control scheme. It is demonstrated that the sealing performances of the instrumentation feedthrough and the integrity of the instrumentation cables are to be acceptable after brazing.

  6. A DSP-based discrete space vector modulation direct torque control of sensorless induction machines

    Energy Technology Data Exchange (ETDEWEB)

    Khoucha, F.; Marouani, K.; Kheloui, A.; Aliouane, K.

    2004-07-01

    In this paper, we present a Direct Torque Control scheme of an induction motor operating without speed sensor. The estimation of the stator flux and the rotor speed is performed by an adaptive observer. In order to reduce the torque, flux, current and speed ripple a Discrete Space Vector Modulation (DSVM-DTC) strategy is implemented using a DSP-based hardware. To illustrate the performances of this control scheme, experimental results are presented. (author)

  7. Inductively guided circuits for ultracold dressed atoms

    CERN Document Server

    Sinuco-Leon, German; Arnold, Aidan S; Garraway, Barry M

    2014-01-01

    We propose a flexible and robust scheme to create closed quasi-one dimensional guides for ultra-cold atoms through the dressing of hyperfine sub-levels of the atomic ground state. The dressing field is spatially modulated by inductive effects over a micro-engineered conducting loop, freeing the trapping region from leading wires in its proximity. We show that arrays of connected ring traps can also be created by carefully designing the shape of the conducting loop. We report on characteristics of the trap and mechanisms that limit the range of parameters available for experimental implementation, including non-adiabatic losses and heat dissipation by induced currents. We outline conditions to select appropriate parameters for operation of the trap with atom-chip technology.

  8. Support Schemes and Ownership Structures

    DEFF Research Database (Denmark)

    Ropenus, Stephanie; Schröder, Sascha Thorsten; Costa, Ana

    for promoting combined heat and power and energy from renewable sources. These Directives are to be implemented at the national level by the Member States. Section 3 conceptually presents the spectrum of national support schemes, ranging from investment support to market‐based operational support. The choice...... an introduction to the policy context for mCHP. Section 1 describes the rationale for the promotion of mCHP by explaining its potential contribution to European energy policy goals. Section 2 addresses the policy context at the supranational European level by outlining relevant EU Directives on support schemes......In recent years, fuel cell based micro‐combined heat and power has received increasing attention due to its potential contribution to energy savings, efficiency gains, customer proximity and flexibility in operation and capacity size. The FC4Home project assesses technical and economic aspects...

  9. Network Regulation and Support Schemes

    DEFF Research Database (Denmark)

    Ropenus, Stephanie; Schröder, Sascha Thorsten; Jacobsen, Henrik

    2009-01-01

    -in tariffs to market-based quota systems, and network regulation approaches, comprising rate-of-return and incentive regulation. National regulation and the vertical structure of the electricity sector shape the incentives of market agents, notably of distributed generators and network operators....... This article seeks to investigate the interactions between the policy dimensions of support schemes and network regulation and how they affect the deployment of distributed generation. Firstly, a conceptual analysis examines how the incentives of the different market agents are affected. In particular......At present, there exists no explicit European policy framework on distributed generation. Various Directives encompass distributed generation; inherently, their implementation is to the discretion of the Member States. The latter have adopted different kinds of support schemes, ranging from feed...

  10. Subranging scheme for SQUID sensors

    Science.gov (United States)

    Penanen, Konstantin I. (Inventor)

    2008-01-01

    A readout scheme for measuring the output from a SQUID-based sensor-array using an improved subranging architecture that includes multiple resolution channels (such as a coarse resolution channel and a fine resolution channel). The scheme employs a flux sensing circuit with a sensing coil connected in series to multiple input coils, each input coil being coupled to a corresponding SQUID detection circuit having a high-resolution SQUID device with independent linearizing feedback. A two-resolution configuration (course and fine) is illustrated with a primary SQUID detection circuit for generating a fine readout, and a secondary SQUID detection circuit for generating a course readout, both having feedback current coupled to the respective SQUID devices via feedback/modulation coils. The primary and secondary SQUID detection circuits function and derive independent feedback. Thus, the SQUID devices may be monitored independently of each other (and read simultaneously) to dramatically increase slew rates and dynamic range.

  11. Supporting Argumentation Schemes in Argumentative Dialogue Games

    Directory of Open Access Journals (Sweden)

    Wells Simon

    2014-03-01

    Full Text Available This paper reports preliminary work into the exploitation of argumentation schemes within dialogue games. We identify a property of dialogue games that we call “scheme awareness” that captures the relationship between dialogue game systems and argumentation schemes. Scheme awareness is used to examine the ways in which existing dialogue games utilise argumentation schemes and consequently the degree with which a dialogue game can be used to construct argument structures. The aim is to develop a set of guidelines for dialogue game design, which feed into a set of Dialogue Game Description Language (DGDL extensions in turn enabling dialogue games to better exploit argumentation schemes.

  12. An Arbitrated Quantum Signature Scheme without Entanglement*

    Science.gov (United States)

    Li, Hui-Ran; Luo, Ming-Xing; Peng, Dai-Yuan; Wang, Xiao-Jun

    2017-09-01

    Several quantum signature schemes are recently proposed to realize secure signatures of quantum or classical messages. Arbitrated quantum signature as one nontrivial scheme has attracted great interests because of its usefulness and efficiency. Unfortunately, previous schemes cannot against Trojan horse attack and DoS attack and lack of the unforgeability and the non-repudiation. In this paper, we propose an improved arbitrated quantum signature to address these secure issues with the honesty arbitrator. Our scheme takes use of qubit states not entanglements. More importantly, the qubit scheme can achieve the unforgeability and the non-repudiation. Our scheme is also secure for other known quantum attacks.

  13. A biometric signcryption scheme without bilinear pairing

    Science.gov (United States)

    Wang, Mingwen; Ren, Zhiyuan; Cai, Jun; Zheng, Wentao

    2013-03-01

    How to apply the entropy in biometrics into the encryption and remote authentication schemes to simplify the management of keys is a hot research area. Utilizing Dodis's fuzzy extractor method and Liu's original signcryption scheme, a biometric identity based signcryption scheme is proposed in this paper. The proposed scheme is more efficient than most of the previous proposed biometric signcryption schemes for that it does not need bilinear pairing computation and modular exponentiation computation which is time consuming largely. The analysis results show that under the CDH and DL hard problem assumption, the proposed scheme has the features of confidentiality and unforgeability simultaneously.

  14. Inductive Powering for a Bionic Eye

    OpenAIRE

    Martínez Ruiz, Sergi

    2015-01-01

    The evolution of the medicine is largely in the last decade due to the increasing research in the bioengineering field. The implantable medical devices (IMD) have an important role in this improvement. During the decades the IMD have evolved rapidly and a new generation of them has been born, the Wireless Implantable Medical Device (WIMD). In this thesis, it will be shown the tools for designing an inductive power link for a bionic lens eye, trying to make as much as possible batch-fabricated...

  15. Cambridge community Optometry Glaucoma Scheme.

    Science.gov (United States)

    Keenan, Jonathan; Shahid, Humma; Bourne, Rupert R; White, Andrew J; Martin, Keith R

    2015-04-01

    With a higher life expectancy, there is an increased demand for hospital glaucoma services in the United Kingdom. The Cambridge community Optometry Glaucoma Scheme (COGS) was initiated in 2010, where new referrals for suspected glaucoma are evaluated by community optometrists with a special interest in glaucoma, with virtual electronic review and validation by a consultant ophthalmologist with special interest in glaucoma. 1733 patients were evaluated by this scheme between 2010 and 2013. Clinical assessment is performed by the optometrist at a remote site. Goldmann applanation tonometry, pachymetry, monoscopic colour optic disc photographs and automated Humphrey visual field testing are performed. A clinical decision is made as to whether a patient has glaucoma or is a suspect, and referred on or discharged as a false positive referral. The clinical findings, optic disc photographs and visual field test results are transmitted electronically for virtual review by a consultant ophthalmologist. The number of false positive referrals from initial referral into the scheme. Of the patients, 46.6% were discharged at assessment and a further 5.7% were discharged following virtual review. Of the patients initially discharged, 2.8% were recalled following virtual review. Following assessment at the hospital, a further 10.5% were discharged after a single visit. The COGS community-based glaucoma screening programme is a safe and effective way of evaluating glaucoma referrals in the community and reducing false-positive referrals for glaucoma into the hospital system. © 2014 Royal Australian and New Zealand College of Ophthalmologists.

  16. Low inductance gas switching.

    Energy Technology Data Exchange (ETDEWEB)

    Chavez, Ray; Harjes, Henry Charles III; Wallace, Zachariah; Elizondo, Juan E.

    2007-10-01

    The laser trigger switch (LTS) is a key component in ZR-type pulsed power systems. In ZR, the pulse rise time through the LTS is > 200 ns and additional stages of pulse compression are required to achieve the desired <100 ns rise time. The inductance of the LTS ({approx}500nH) in large part determines the energy transfer time through the switch and there is much to be gained in improving system performance and reducing system costs by reducing this inductance. The current path through the cascade section of the ZR LTS is at a diameter of {approx} 6-inches which is certainly not optimal from an inductance point of view. The LTS connects components of much greater diameter (typically 4-5 feet). In this LDRD the viability of switch concepts in which the diameter of cascade section is greatly increased have been investigated. The key technical question to be answered was, will the desired multi-channel behavior be maintained in a cascade section of larger diameter. This LDRD proceeded in 2 distinct phases. The original plan for the LDRD was to develop a promising switch concept and then design, build, and test a moderate scale switch which would demonstrate the key features of the concept. In phase I, a switch concept which meet all electrical design criteria and had a calculated inductance of 150 nH was developed. A 1.5 MV test switch was designed and fabrication was initiated. The LDRD was then redirected due to budgetary concerns. The fabrication of the switch was halted and the focus of the LDRD was shifted to small scale experiments designed to answer the key technical question concerning multi-channel behavior. In phase II, the Multi-channel switch test bed (MCST) was designed and constructed. The purpose of MCST was to provide a versatile, fast turn around facility for the study the multi-channel electrical breakdown behavior of a ZR type cascade switch gap in a parameter space near that of a ZR LTS. Parameter scans on source impedance, gap tilt, gap spacing and

  17. Influence of Agrobacterium rhizogenes on induction of hairy roots for ...

    African Journals Online (AJOL)

    Artemisinin production from plant tissue cultures and induction of hairy roots in vitro have been considered to be a promising alternative, which offer a high degree of genetic stability, grow rapidly and produce the higher spectrum of secondary metabolites than wild type plants. Hairy root cultures developed from infection of ...

  18. Influence of Agrobacterium rhizogenes on induction of hairy roots for ...

    African Journals Online (AJOL)

    Harish Tomar

    2012-05-01

    May 1, 2012 ... Artemisinin production from plant tissue cultures and induction of hairy roots in vitro have been considered to be a promising alternative, which offer a high degree of genetic stability, grow rapidly and produce the higher spectrum of secondary metabolites than wild type plants. Hairy root cultures developed ...

  19. Characterization methods of nano-patterned surfaces generated by induction heating assisted injection molding

    DEFF Research Database (Denmark)

    Tang, Peter Torben; Ravn, Christian; Menotti, Stefano

    2015-01-01

    An induction heating-assisted injection molding (IHAIM) process developed by the authors is used to replicate surfaces containing random nano-patterns. The injection molding setup is developed so that an induction heating system rapidly heats the cavity wall at rates of up to 10◦C/s. In order...

  20. Advanced Reactive Power Reserve Management Scheme to Enhance LVRT Capability

    Directory of Open Access Journals (Sweden)

    Hwanik Lee

    2017-10-01

    Full Text Available Abstract: To increase the utilization of wind power in the power system, grid integration standards have been proposed for the stable integration of large-scale wind power plants. In particular, fault-ride-through capability, especially Low-Voltage-Ride-Through (LVRT, has been emphasized, as it is related to tripping in wind farms. Therefore, this paper proposes the Wind power plant applicable-Effective Reactive power Reserve (Wa-ERPR, which combines both wind power plants and conventional generators at the Point of Interconnection (POI. The reactive power capability of the doubly-fed induction generator wind farm was considered to compute the total Wa-ERPR at the POI with reactive power capability of existing generators. By using the Wa-ERPR management algorithm, in case of a violation of the LVRT standards, the amount of reactive power compensation is computed using the Wa-ERPR management scheme. The proposed scheme calculates the Wa-ERPR and computes the required reactive power, reflecting the change of the system topology pre- and post-contingency, to satisfy the LVRT criterion when LVRT regulation is not satisfied at the POI. The static synchronous compensator (STATCOM with the capacity corresponding to calculated amount of reactive power through the Wa-ERPR management scheme is applied to the POI. Therefore, it is confirmed that the wind power plant satisfies the LVRT criteria by securing the appropriate reactive power at the POI, by applying of the proposed algorithm.

  1. METAPHORIC MECHANISMS IN IMAGE SCHEME DEVELOPMENT

    National Research Council Canada - National Science Library

    Pankratova, S.A

    2017-01-01

    .... In the summary the author underscores that both ways of image scheme development are of importance to cognitive science, both heuristic epiphora and image-based diaphora play a significant role in the explication of image scheme development.

  2. The Ubiquity of Smooth Hilbert Schemes

    OpenAIRE

    Staal, Andrew P.

    2017-01-01

    We investigate the geography of Hilbert schemes that parametrize closed subschemes of projective space with a specified Hilbert polynomial. We classify Hilbert schemes with unique Borel-fixed points via combinatorial expressions for their Hilbert polynomials. We realize the set of all nonempty Hilbert schemes as a probability space and prove that Hilbert schemes are irreducible and nonsingular with probability greater than $0.5$.

  3. MIRD radionuclide data and decay schemes

    CERN Document Server

    Eckerman, Keith F

    2007-01-01

    For all physicians, scientists, and physicists working in the nuclear medicine field, the MIRD: Radionuclide Data and Decay Schemes updated edition is an essential sourcebook for radiation dosimetry and understanding the properties of radionuclides. Includes CD Table of Contents Decay schemes listed by atomic number Radioactive decay processes Serial decay schemes Decay schemes and decay tables This essential reference for nuclear medicine physicians, scientists and physicists also includes a CD with tabulations of the radionuclide data necessary for dosimetry calculations.

  4. Fuzzy logic based controller for five-phase induction motor drive system

    Directory of Open Access Journals (Sweden)

    Z.M.S. El-Barbary

    2012-12-01

    Full Text Available This paper presents fuzzy logic based controller for five-phase induction motor drives. The controller is based on indirect rotor field oriented control technique. The complete control scheme including the fuzzy logic is experimentally implemented using a digital signal processing board for a laboratory five-phase induction motor, Simulation is carried out by using the Matlab/Simulink package. The performance of the proposed system is investigated at different operating conditions. The proposed controller is a suitable to high performance five-phase induction motor drives. Simulation and experimental results validate the proposed approaches.

  5. Energy-saving technology of vector controlled induction motor based on the adaptive neuro-controller

    Science.gov (United States)

    Engel, E.; Kovalev, I. V.; Karandeev, D.

    2015-10-01

    The ongoing evolution of the power system towards a Smart Grid implies an important role of intelligent technologies, but poses strict requirements on their control schemes to preserve stability and controllability. This paper presents the adaptive neuro-controller for the vector control of induction motor within Smart Gird. The validity and effectiveness of the proposed energy-saving technology of vector controlled induction motor based on adaptive neuro-controller are verified by simulation results at different operating conditions over a wide speed range of induction motor.

  6. THROUGHPUT ANALYSIS OF EXTENDED ARQ SCHEMES

    African Journals Online (AJOL)

    PUBLICATIONS1

    and Wait (SW), Selective Repeat (SR), Stutter. (ST) and Go-Back-N (GBN) (Lin and Costello,. 2003). Combinations of these schemes lead to mixed mode schemes which include the SR-. GBN, SR-ST1 and SR-ST2. In the mixed mode schemes, when a prescribed number of failures occur in the SR mode, the GBN or ST ...

  7. The Original Management Incentive Schemes

    OpenAIRE

    Richard T. Holden

    2005-01-01

    During the 1990s, the structure of pay for top corporate executives shifted markedly as the use of stock options greatly expanded. By the early 2000s, as the dot-com boom ended and the Nasdaq stock index melted down, these modern executive incentive schemes were being sharply questioned on many grounds—for encouraging excessive risk-taking and a short-run orientation, for being an overly costly and inefficient method of providing incentives, and even for tempting managers of firms like Enron,...

  8. Adaptive Optics Metrics & QC Scheme

    Science.gov (United States)

    Girard, Julien H.

    2017-09-01

    "There are many Adaptive Optics (AO) fed instruments on Paranal and more to come. To monitor their performances and assess the quality of the scientific data, we have developed a scheme and a set of tools and metrics adapted to each flavour of AO and each data product. Our decisions to repeat observations or not depends heavily on this immediate quality control "zero" (QC0). Atmospheric parameters monitoring can also help predict performances . At the end of the chain, the user must be able to find the data that correspond to his/her needs. In Particular, we address the special case of SPHERE."

  9. The mathematics of Ponzi schemes

    OpenAIRE

    Artzrouni, Marc

    2009-01-01

    A first order linear differential equation is used to describe the dynamics of an investment fund that promises more than it can deliver, also known as a Ponzi scheme. The model is based on a promised, unrealistic interest rate; on the actual, realized nominal interest rate; on the rate at which new deposits are accumulated and on the withdrawal rate. Conditions on these parameters are given for the fund to be solvent or to collapse. The model is fitted to data available on Charles...

  10. Vector control of induction machines

    CERN Document Server

    Robyns, Benoit

    2012-01-01

    After a brief introduction to the main law of physics and fundamental concepts inherent in electromechanical conversion, ""Vector Control of Induction Machines"" introduces the standard mathematical models for induction machines - whichever rotor technology is used - as well as several squirrel-cage induction machine vector-control strategies. The use of causal ordering graphs allows systematization of the design stage, as well as standardization of the structure of control devices. ""Vector Control of Induction Machines"" suggests a unique approach aimed at reducing parameter sensitivity for

  11. Technological inductive power transfer systems

    National Research Council Canada - National Science Library

    Nikolay D. Madzharov; Valentin S. Nemkov

    2017-01-01

    Inductive power transfer is a very fast expanding technology with multiple design principles and practical implementations ranging from charging phones and computers to bionic systems, car chargers...

  12. Comprehensive Teacher Induction: Linking Teacher Induction to Theory

    Science.gov (United States)

    Keilwitz, Heather A.

    2014-01-01

    Teacher retention is a wide concern in education and in response school districts throughout the United States are developing more comprehensive teacher induction programs. Components of teacher induction programs that have assisted with successful teacher development include release time for teacher observation, assignment of a knowledgeable…

  13. Pre-Induction and Intrapartum Correlates of Successful Induction Of ...

    African Journals Online (AJOL)

    Context: Induction of labour (IOL) is a therapeutic challenge and an alternative to Caesarean section. Objectives: To evaluate the success rate of IOL and its determinants at the Ebonyi State University Teaching Hospital (EBSUTH), Abakaliki. Methods: A retrospective study involving 251 parturients who had induction of ...

  14. Induction heating using induction coils in series-parallel circuits

    Energy Technology Data Exchange (ETDEWEB)

    Matsen, Marc Rollo; Geren, William Preston; Miller, Robert James; Negley, Mark Alan; Dykstra, William Chet

    2017-11-14

    A part is inductively heated by multiple, self-regulating induction coil circuits having susceptors, coupled together in parallel and in series with an AC power supply. Each of the circuits includes a tuning capacitor that tunes the circuit to resonate at the frequency of AC power supply.

  15. A Multipurpose Key Agreement Scheme in Ubiquitous Computing Environments

    Directory of Open Access Journals (Sweden)

    Chin-Chen Chang

    2015-01-01

    Full Text Available Due to the rapid advancement of cryptographic techniques, the smart card has recently become a popular device because it is capable of storing and computing essential information with such properties as tamper resistance. However, many service providers must satisfy the user’s desire to be able to access services anytime and anywhere with the smart card computing devices. Therefore, multipurpose smart cards have become very popular identification tokens. In 2011, Wang et al. proposed an authentication and key agreement scheme for smart card use. Even so, two drawbacks still exist; that is, (1 the security requirement of mutual authentication has not been satisfied and (2 the authentication scheme cannot be used for multipurpose smart cards. In this paper, we propose an efficient and secure multipurpose, authenticated, key agreement scheme in which the user is required to register only once and can be authenticated without any registration center. Furthermore, the proposed scheme can be used in ubiquitous environments because of its low computation and communication overhead.

  16. Wave atom transform generated strong image hashing scheme

    Science.gov (United States)

    Liu, Fang; Cheng, Lee-Ming; Leung, Hon-Yin; Fu, Qi-Kai

    2012-11-01

    The rapid development of multimedia technology has resulted in a rising rate on digital unauthorized utilization and forgery, which makes the situation of image authentication increasingly severe. A novel strong image hashing scheme is proposed based on wave atom transform, which can better authenticate images by precisely distinguishing the malicious tampered images from the non-maliciously processed ones. Wave atom transform is employed since it has significantly sparser expansion and better characteristics of texture feature extraction than other traditional transforms. For better detection sensitivity, gray code is applied instead of natural binary code to optimize the hamming distance. Randomizations are also performed using Rényi chaotic map for the purposes of secure image hashing and key sensitivity. The experimental results show that the proposed strong scheme is robust to non-malicious content-preserving operations and also fragile to malicious content-altering operations. The scheme also outperforms DCT and DWT based schemes in terms of receiving operating characteristic (ROC) curves. Moreover, to provide an application-defined tradeoff, a security enhancement approach based on Rényi map is presented, which can further protect the integrity and secrecy of images.

  17. A comparison of temperature and precipitation responses to different Earth radiation management geoengineering schemes

    OpenAIRE

    Crook, JA; Jackson, LS; Osprey, SM; Forster, PM

    2015-01-01

    Earth radiation management has been suggested as a way to rapidly counteract global warming in the face of a lack of mitigation efforts, buying time and avoiding potentially catastrophic warming. We compare six different radiation management schemes that use surface, troposphere, and stratosphere interventions in a single climate model in which we projected future climate from 2020 to 2099 based on RCP4.5. We analyze the surface air temperature responses to determine how effective the schemes...

  18. REMINDER: Saved Leave Scheme (SLS)

    CERN Multimedia

    2003-01-01

    Transfer of leave to saved leave accounts Under the provisions of the voluntary saved leave scheme (SLS), a maximum total of 10 days'* annual and compensatory leave (excluding saved leave accumulated in accordance with the provisions of Administrative Circular No 22B) can be transferred to the saved leave account at the end of the leave year (30 September). We remind you that unused leave of all those taking part in the saved leave scheme at the closure of the leave year accounts is transferred automatically to the saved leave account on that date. Therefore, staff members have no administrative steps to take. In addition, the transfer, which eliminates the risk of omitting to request leave transfers and rules out calculation errors in transfer requests, will be clearly shown in the list of leave transactions that can be consulted in EDH from October 2003 onwards. Furthermore, this automatic leave transfer optimizes staff members' chances of benefiting from a saved leave bonus provided that they ar...

  19. A concatenation scheme of LDPC codes and source codes for flash memories

    Science.gov (United States)

    Huang, Qin; Pan, Song; Zhang, Mu; Wang, Zulin

    2012-12-01

    Recently, low-density parity-check (LDPC) codes have been applied in flash memories to correct errors. However, as verified in this article, their performance degrades rapidly as the number of stuck cells increases. Thus, this paper presents a concatenation reliability scheme of LDPC codes and source codes, which aims to improve the performance of LDPC codes for flash memories with stuck cells. In this scheme, the locations of stuck cells is recorded by source codes in the write process such that erasures rather than wrong log-likelihood ratios on these cells are given in the read process. Then, LDPC codes correct these erasures and soft errors caused by cell-to-cell interferences. The analyses of channel capacity and compression rates of source codes with side information show that the memory cost of the proposed scheme is moderately low. Simulation results verify that the proposed scheme outperforms the traditional scheme with only LDPC codes.

  20. Delivery of a national home safety equipment scheme in England: a survey of local scheme leaders.

    Science.gov (United States)

    Mulvaney, C A; Watson, M C; Hamilton, T; Errington, G

    2013-11-01

    Unintentional home injuries sustained by preschool children are a major cause of morbidity in the UK. Home safety equipment schemes may reduce home injury rates. In 2009, the Royal Society for the Prevention of Accidents was appointed as central coordinator of a two-year, £18m national home safety equipment scheme in England. This paper reports the findings from a national survey of all scheme leaders responsible for local scheme delivery. A questionnaire mailed to all local scheme leaders sought details of how the schemes were operated locally; barriers and facilitators to scheme implementation; evaluation of the local scheme and its sustainability. A response rate of 73% was achieved. Health visitors and family support workers played a key role in both the identification of eligible families and performing home safety checks. The majority of local scheme leaders (94.6%) reported that they thought their local scheme had been successful in including those families considered 'harder to engage'. Many scheme leaders (72.4%) reported that they had evaluated the provision of safety equipment in their scheme and over half (56.6%) stated that they would not be able to continue the scheme once funding ceased. Local schemes need support to effectively evaluate their scheme and to seek sustainability funding to ensure the future of the scheme. There remains a lack of evidence of whether the provision of home safety equipment reduces injuries in preschool children.

  1. Channel Aggregation Schemes for Cognitive Radio Networks

    Science.gov (United States)

    Lee, Jongheon; So, Jaewoo

    This paper proposed three channel aggregation schemes for cognitive radio networks, a constant channel aggregation scheme, a probability distribution-based variable channel aggregation scheme, and a residual channel-based variable channel aggregation scheme. A cognitive radio network can have a wide bandwidth if unused channels in the primary networks are aggregated. Channel aggregation schemes involve either constant channel aggregation or variable channel aggregation. In this paper, a Markov chain is used to develop an analytical model of channel aggregation schemes; and the performance of the model is evaluated in terms of the average sojourn time, the average throughput, the forced termination probability, and the blocking probability. Simulation results show that channel aggregation schemes can reduce the average sojourn time of cognitive users by increasing the channel occupation rate of unused channels in a primary network.

  2. Hybrid scheme for Brownian semistationary processes

    DEFF Research Database (Denmark)

    Bennedsen, Mikkel; Lunde, Asger; Pakkanen, Mikko S.

    is to approximate the kernel function by a power function near zero and by a step function elsewhere. The resulting approximation of the process is a combination of Wiener integrals of the power function and a Riemann sum, which is why we call this method a hybrid scheme. Our main theoretical result describes...... the asymptotics of the mean square error of the hybrid scheme and we observe that the scheme leads to a substantial improvement of accuracy compared to the ordinary forward Riemann-sum scheme, while having the same computational complexity. We exemplify the use of the hybrid scheme by two numerical experiments......We introduce a simulation scheme for Brownian semistationary processes, which is based on discretizing the stochastic integral representation of the process in the time domain. We assume that the kernel function of the process is regularly varying at zero. The novel feature of the scheme...

  3. Nonlinear Decoupling of Torque and Field Amplitude in an Induction Motor

    DEFF Research Database (Denmark)

    Rasmussen, Henrik; Vadstrup, P.; Børsting, H.

    1997-01-01

    A novel approach to control of induction motors, based on nonlinear state feedback, is presented. The resulting scheme gives a linearized input-output decoupling of the torque and the amplitude of the field. The proposed approach is used to design controllers for the field amplitude and the motor...

  4. Sampling Assumptions in Inductive Generalization

    Science.gov (United States)

    Navarro, Daniel J.; Dry, Matthew J.; Lee, Michael D.

    2012-01-01

    Inductive generalization, where people go beyond the data provided, is a basic cognitive capability, and it underpins theoretical accounts of learning, categorization, and decision making. To complete the inductive leap needed for generalization, people must make a key "sampling" assumption about how the available data were generated.…

  5. Regularity of conservative inductive limits

    Directory of Open Access Journals (Sweden)

    Jan Kucera

    1999-01-01

    Full Text Available A sequentially complete inductive limit of Fréchet spaces is regular, see [3]. With a minor modification, this property can be extended to inductive limits of arbitrary locally convex spaces under an additional assumption of conservativeness.

  6. Study of Low Voltage Ride Through Performance for Wind Power Generation with Doubly Fed Induction Generator

    Science.gov (United States)

    Hirawata, Ryoya; Kai, Takaaki

    Recently, the introduction of wind power generation is increasing rapidly. The ratio of wind power generation to the capacity of a total generation is getting higher and higher. When the phase-to-phase fault occurs in the power system, the frequency of power system is lower due to disconnecting of the wind power generation with doubly fed induction generator (DFIG). Therefore, the power system might become unstable. This paper describes the LVRT (low voltage ride through) performance improvement scheme of the wind power generation with DFIG. The wind power generation is disconnected from the grid in case of the power system fault. It is independently in operation from the grid by controlling of the inverter equipped in the generation. After clearance of the power system fault, the wind power generation is immediately re-connected to the grid. As a result, instability in the power system disappears. The performance of LVRT is confirmed by using simulation software PSCAD/EMTDC. The simulation result shows an excellent result to the three-phase short-circuit fault of the voltage dip 100%.

  7. Real time PI-backstepping induction machine drive with efficiency optimization.

    Science.gov (United States)

    Farhani, Fethi; Ben Regaya, Chiheb; Zaafouri, Abderrahmen; Chaari, Abdelkader

    2017-09-01

    This paper describes a robust and efficient speed control of a three phase induction machine (IM) subjected to load disturbances. First, a Multiple-Input Multiple-Output (MIMO) PI-Backstepping controller is proposed for a robust and highly accurate tracking of the mechanical speed and rotor flux. Asymptotic stability of the control scheme is proven by Lyapunov Stability Theory. Second, an active online optimization algorithm is used to optimize the efficiency of the drive system. The efficiency improvement approach consists of adjusting the rotor flux with respect to the load torque in order to minimize total losses in the IM. A dSPACE DS1104 R&D board is used to implement the proposed solution. The experimental results released on 3kW squirrel cage IM, show that the reference speed as well as the rotor flux are rapidly achieved with a fast transient response and without overshoot. A good load disturbances rejection response and IM parameters variation are fairly handled. The improvement of drive system efficiency reaches up to 180% at light load. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

  8. A Hybrid Data Compression Scheme for Improved VNC

    Directory of Open Access Journals (Sweden)

    Xiaozheng (Jane Zhang

    2007-04-01

    Full Text Available Virtual Network Computing (VNC has emerged as a promising technology in distributed computing environment since its invention in the late nineties. Successful application of VNC requires rapid data transfer from one machine to another over a TCP/IP network connection. However transfer of screen data consumes much network bandwidth and current data encoding schemes for VNC are far from being ideal. This paper seeks to improve screen data compression techniques to enable VNC over slow connections and present a reasonable speed and image quality. In this paper, a hybrid technique is proposed for improving coding efficiency. The algorithm first divides a screen image into pre-defined regions and applies encoding schemes to each area according to the region characteristics. Second, correlation of screen data in consecutive frames is exploited where multiple occurrences of similar image contents are detected. The improved results are demonstrated in a dynamic environment with various screen image types and desktop manipulation.

  9. BJPsych Bulletin author mentoring scheme - helping trainees become published authors.

    Science.gov (United States)

    Pimm, Jonathan; Galbraith, Niall

    2016-02-01

    The publishing world is changing rapidly. Innovations include the move to open access, the rise of social media and the transition to digitalisation. In the light of these developments and with ever-increasing pressures on early career psychiatrists and trainees to publish papers in journals with a recognised pedigree, the BJPsych Bulletin is piloting an author mentoring scheme. Mentors will help clinicians and aspiring academics develop articles from a pedestrian manuscript to one that will hopefully provoke important debate and aid changes in current practices. The scheme will run on a trial basis for approximately 12 months and will then be reviewed. Mentoring has been found to have an important effect of research output including publication and grant success; the hope is that this new initiative at the BJPsych Bulletin will result in such dividends to all involved.

  10. Scheme of thinking quantum systems

    Science.gov (United States)

    Yukalov, V. I.; Sornette, D.

    2009-11-01

    A general approach describing quantum decision procedures is developed. The approach can be applied to quantum information processing, quantum computing, creation of artificial quantum intelligence, as well as to analyzing decision processes of human decision makers. Our basic point is to consider an active quantum system possessing its own strategic state. Processing information by such a system is analogous to the cognitive processes associated to decision making by humans. The algebra of probability operators, associated with the possible options available to the decision maker, plays the role of the algebra of observables in quantum theory of measurements. A scheme is advanced for a practical realization of decision procedures by thinking quantum systems. Such thinking quantum systems can be realized by using spin lattices, systems of magnetic molecules, cold atoms trapped in optical lattices, ensembles of quantum dots, or multilevel atomic systems interacting with electromagnetic field.

  11. Fragment separator momentum compression schemes

    Energy Technology Data Exchange (ETDEWEB)

    Bandura, Laura, E-mail: bandura@anl.gov [Facility for Rare Isotope Beams (FRIB), 1 Cyclotron, East Lansing, MI 48824-1321 (United States); National Superconducting Cyclotron Lab, Michigan State University, 1 Cyclotron, East Lansing, MI 48824-1321 (United States); Erdelyi, Bela [Argonne National Laboratory, Argonne, IL 60439 (United States); Northern Illinois University, DeKalb, IL 60115 (United States); Hausmann, Marc [Facility for Rare Isotope Beams (FRIB), 1 Cyclotron, East Lansing, MI 48824-1321 (United States); Kubo, Toshiyuki [RIKEN Nishina Center, RIKEN, Wako (Japan); Nolen, Jerry [Argonne National Laboratory, Argonne, IL 60439 (United States); Portillo, Mauricio [Facility for Rare Isotope Beams (FRIB), 1 Cyclotron, East Lansing, MI 48824-1321 (United States); Sherrill, Bradley M. [National Superconducting Cyclotron Lab, Michigan State University, 1 Cyclotron, East Lansing, MI 48824-1321 (United States)

    2011-07-21

    We present a scheme to use a fragment separator and profiled energy degraders to transfer longitudinal phase space into transverse phase space while maintaining achromatic beam transport. The first order beam optics theory of the method is presented and the consequent enlargement of the transverse phase space is discussed. An interesting consequence of the technique is that the first order mass resolving power of the system is determined by the first dispersive section up to the energy degrader, independent of whether or not momentum compression is used. The fragment separator at the Facility for Rare Isotope Beams is a specific application of this technique and is described along with simulations by the code COSY INFINITY.

  12. Fragment separator momentum compression schemes.

    Energy Technology Data Exchange (ETDEWEB)

    Bandura, L.; Erdelyi, B.; Hausmann, M.; Kubo, T.; Nolen, J.; Portillo, M.; Sherrill, B.M. (Physics); (MSU); (Northern Illinois Univ.); (RIKEN)

    2011-07-21

    We present a scheme to use a fragment separator and profiled energy degraders to transfer longitudinal phase space into transverse phase space while maintaining achromatic beam transport. The first order beam optics theory of the method is presented and the consequent enlargement of the transverse phase space is discussed. An interesting consequence of the technique is that the first order mass resolving power of the system is determined by the first dispersive section up to the energy degrader, independent of whether or not momentum compression is used. The fragment separator at the Facility for Rare Isotope Beams is a specific application of this technique and is described along with simulations by the code COSY INFINITY.

  13. Fragment separator momentum compression schemes

    Science.gov (United States)

    Bandura, Laura; Erdelyi, Bela; Hausmann, Marc; Kubo, Toshiyuki; Nolen, Jerry; Portillo, Mauricio; Sherrill, Bradley M.

    2011-07-01

    We present a scheme to use a fragment separator and profiled energy degraders to transfer longitudinal phase space into transverse phase space while maintaining achromatic beam transport. The first order beam optics theory of the method is presented and the consequent enlargement of the transverse phase space is discussed. An interesting consequence of the technique is that the first order mass resolving power of the system is determined by the first dispersive section up to the energy degrader, independent of whether or not momentum compression is used. The fragment separator at the Facility for Rare Isotope Beams is a specific application of this technique and is described along with simulations by the code COSY INFINITY.

  14. Electrical injection schemes for nanolasers

    DEFF Research Database (Denmark)

    Lupi, Alexandra; Chung, Il-Sug; Yvind, Kresten

    2013-01-01

    threshold current has been achieved with the lateral electrical injection through the BH; while the lowest resistance has been obtained from the current post structure even though this model shows a higher current threshold because of the lack of carrier confinement. Final scope of the simulations......The performance of injection schemes among recently demonstrated electrically pumped photonic crystal nanolasers has been investigated numerically. The computation has been carried out at room temperature using a commercial semiconductor simulation software. For the simulations two electrical...... of 3 InGaAsP QWs on an InP substrate has been chosen for the modeling. In the simulations the main focus is on the electrical and optical properties of the nanolasers i.e. electrical resistance, threshold voltage, threshold current and wallplug efficiency. In the current flow evaluation the lowest...

  15. Staggered Schemes for Fluctuating Hydrodynamics

    CERN Document Server

    Balboa, F; Delgado-Buscalioni, R; Donev, A; Fai, T; Griffith, B; Peskin, C S

    2011-01-01

    We develop numerical schemes for solving the isothermal compressible and incompressible equations of fluctuating hydrodynamics on a grid with staggered momenta. We develop a second-order accurate spatial discretization of the diffusive, advective and stochastic fluxes that satisfies a discrete fluctuation-dissipation balance, and construct temporal discretizations that are at least second-order accurate in time deterministically and in a weak sense. Specifically, the methods reproduce the correct equilibrium covariances of the fluctuating fields to third (compressible) and second (incompressible) order in the time step, as we verify numerically. We apply our techniques to model recent experimental measurements of giant fluctuations in diffusively mixing fluids in a micro-gravity environment [A. Vailati et. al., Nature Communications 2:290, 2011]. Numerical results for the static spectrum of non-equilibrium concentration fluctuations are in excellent agreement between the compressible and incompressible simula...

  16. Assessment of the microstructure and torsional fatigue performance of an induction hardened vanadium microalloyed medium-carbon steel

    Science.gov (United States)

    Rothleutner, Lee M.

    Vanadium microalloying of medium-carbon bar steels is a common practice in industry for a number of hot rolled as well as forged and controlled-cooled components. However, use of vanadium microalloyed steels has expanded into applications beyond their originally designed controlled-cooled processing scheme. Applications such as transmission shafts often require additional heat-treatments such as quench and tempering and/or induction hardening to meet packaging or performance requirements. As a result, there is uncertainty regarding the influence of vanadium on the properties of heat-treated components, specifically the effect of rapid heat-treating such as induction hardening. In the current study, the microstructural evolution and torsional fatigue behavior of induction hardened 1045 and 10V45 (0.08 wt pct V) steels were examined. Torsional fatigue specimens specifically designed for this research were machined from the as-received, hot rolled bars and induction hardened using both scanning (96 kHz/72 kW) and single-shot (31 kHz/128 kW) methods. Four conditions were evaluated, three scan hardened to 25, 32, and 44 pct nominal effective case depths and one single-shot hardened to 44 pct. Torsional fatigue tests were conducted at a stress ratio of 0.1 and shear stress amplitudes of 550, 600, and 650 MPa. Physical simulations using the thermal profiles from select induction hardened conditions were conducted in the GleebleRTM 3500 to augment microstructural analysis of torsional fatigue specimens. Thermal profiles were calculated by a collaborating private company using electro-thermal finite element analysis. Residual stresses were evaluated for all conditions using a strain gage hole drilling technique. The results showed that vanadium microalloying has an influence on the microstructure in the highest hardness region of the induction-hardened case as well as the total case region. Vanadium microalloyed conditions consistently exhibited a greater amount of non

  17. Torque Ripple Reduction in Direct Torque Control Based Induction Motor using Intelligent Controllers

    Science.gov (United States)

    Sudhakar, Ambarapu; Vijaya Kumar, M.

    2015-09-01

    This paper presents intelligent control scheme together with conventional control scheme to overcome the problems with uncertainties in the structure encountered with classical model based design of induction motor drive based on direct torque control (DTC). It allows high dynamic performance to be obtained with very simple hysteresis control scheme. Direct control of the torque and flux is achieved by proper selection of inverter voltage space vector through a lookup table. This paper also presents the application of intelligent controllers like neural network and fuzzy logic controllers to control induction machines with DTC. Intelligent controllers are used to emulate the state selector of the DTC. With implementation of intelligent controllers the system is also verified and proved to be operated stably with reduced torque ripple. The proposed method validity and effectiveness has been verified by computer simulations using Matlab/Simulink®. These results are compared with the ones obtained with a classical DTC using proportional integral speed controller.

  18. Contrasting Patterns of Diterpene Acid Induction by Red Pine and White Spruce to Simulated Bark Beetle Attack, and Interspecific Differences in Sensitivity Among Fungal Associates

    Science.gov (United States)

    Charles J. Mason; Kier D. Klepzig; Brian J. Kopper; Philip J. Kersten; Barbara L. Illman; Kenneth F. Raffa

    2015-01-01

    Conifers possess a suite of physiochemical defenses that protect their subcortical tissues from bark beetle -fungal complexes. These defenses include rapid induction of terpenoids and phenolics at the site of attack. Studies of the distribution, induction, and bioactivity of conifer terpenoids have focused heavily on monoterpenes. We assessed induction of diterpene...

  19. A Three Factor Remote User Authentication Scheme Using Collision Resist Fuzzy Extractor in Single Server Environment

    Directory of Open Access Journals (Sweden)

    Giri Debasis

    2017-01-01

    Full Text Available Due to rapid growth of online applications, it is needed to provide such a facility by which communicators can get the services by applying the applications in a secure way. As communications are done through an insecure channel like Internet, any adversary can trap and modify the communication messages. Only authentication procedure can overcome the aforementioned problem. Many researchers have proposed so many authentication schemes in this literature. But, this paper has shown that many of them are not usable in real world application scenarios because, the existing schemes cannot resist all the possible attacks. Therefore, this paper has proposed a three factor authentication scheme using hash function and fuzzy extractor. This paper has further analyzed the security of the proposed scheme using random oracle model. The analysis shows that the proposed scheme can resist all the possible attacks. Furthermore, comparison between proposed scheme and related existing schemes shows that the proposed scheme has better trade-off among storage, computational and communication costs.

  20. On Optimal Designs of Some Censoring Schemes

    Directory of Open Access Journals (Sweden)

    Dr. Adnan Mohammad Awad

    2016-03-01

    Full Text Available The main objective of this paper  is to explore suitability of some entropy-information measures for introducing a new optimality censoring criterion and to apply it to some censoring schemes from some underlying life-time models.  In addition, the  paper investigates four related issues namely; the  effect of the parameter of parent distribution on optimal scheme, equivalence of schemes based on Shannon and Awad sup-entropy measures, the conjecture that the optimal scheme is one stage scheme, and  a conjecture by Cramer and Bagh (2011 about Shannon minimum and maximum schemes when parent distribution is reflected power. Guidelines for designing an optimal censoring plane are reported together with theoretical and numerical results and illustrations.

  1. Improved Load Shedding Scheme considering Distributed Generation

    DEFF Research Database (Denmark)

    Das, Kaushik; Nitsas, Antonios; Altin, Müfit

    2017-01-01

    With high penetration of distributed generation (DG), the conventional under-frequency load shedding (UFLS) face many challenges and may not perform as expected. This article proposes new UFLS schemes, which are designed to overcome the shortcomings of traditional load shedding scheme. These sche......With high penetration of distributed generation (DG), the conventional under-frequency load shedding (UFLS) face many challenges and may not perform as expected. This article proposes new UFLS schemes, which are designed to overcome the shortcomings of traditional load shedding scheme....... These schemes utilize directional relays, power flow through feeders, wind and PV measurements to optimally select the feeders to be disconnected during load shedding such that DG disconnection is minimized while disconnecting required amount of consumption. These different UFLS schemes are compared in terms...

  2. Antibody induction versus corticosteroid induction for liver transplant recipients

    DEFF Research Database (Denmark)

    Penninga, Luit; Wettergren, André; Wilson, Colin H

    2014-01-01

    BACKGROUND: Liver transplantation is an established treatment option for end-stage liver failure. To date, no consensus has been reached on the use of immunosuppressive T-cell specific antibody induction compared with corticosteroid induction of immunosuppression after liver transplantation....... OBJECTIVES: To assess the benefits and harms of T-cell specific antibody induction versus corticosteroid induction for prevention of acute rejection in liver transplant recipients. SEARCH METHODS: We searched The Cochrane Hepato-Biliary Group Controlled Trials Register, the Cochrane Central Register...... of Controlled Trials (CENTRAL), MEDLINE, EMBASE, Science Citation Index Expanded, and the World Health Organization (WHO) International Clinical Trials Registry Platform (ICTRP) on 30 September 2013 together with reference checking, citation searching, contact with trial authors and pharmaceutical companies...

  3. Induction Motor Parameter Identification Using a Gravitational Search Algorithm

    Directory of Open Access Journals (Sweden)

    Omar Avalos

    2016-04-01

    Full Text Available The efficient use of electrical energy is a topic that has attracted attention for its environmental consequences. On the other hand, induction motors represent the main component in most industries. They consume the highest energy percentages in industrial facilities. This energy consumption depends on the operation conditions of the induction motor imposed by its internal parameters. Since the internal parameters of an induction motor are not directly measurable, an identification process must be conducted to obtain them. In the identification process, the parameter estimation is transformed into a multidimensional optimization problem where the internal parameters of the induction motor are considered as decision variables. Under this approach, the complexity of the optimization problem tends to produce multimodal error surfaces for which their cost functions are significantly difficult to minimize. Several algorithms based on evolutionary computation principles have been successfully applied to identify the optimal parameters of induction motors. However, most of them maintain an important limitation: They frequently obtain sub-optimal solutions as a result of an improper equilibrium between exploitation and exploration in their search strategies. This paper presents an algorithm for the optimal parameter identification of induction motors. To determine the parameters, the proposed method uses a recent evolutionary method called the gravitational search algorithm (GSA. Different from most of the existent evolutionary algorithms, the GSA presents a better performance in multimodal problems, avoiding critical flaws such as the premature convergence to sub-optimal solutions. Numerical simulations have been conducted on several models to show the effectiveness of the proposed scheme.

  4. Rapid mixing kinetic techniques.

    Science.gov (United States)

    Martin, Stephen R; Schilstra, Maria J

    2013-01-01

    Almost all of the elementary steps in a biochemical reaction scheme are either unimolecular or bimolecular processes that frequently occur on sub-second, often sub-millisecond, time scales. The traditional approach in kinetic studies is to mix two or more reagents and monitor the changes in concentrations with time. Conventional spectrophotometers cannot generally be used to study reactions that are complete within less than about 20 s, as it takes that amount of time to manually mix the reagents and activate the instrument. Rapid mixing techniques, which generally achieve mixing in less than 2 ms, overcome this limitation. This chapter is concerned with the use of these techniques in the study of reactions which reach equilibrium; the application of these methods to the study of enzyme kinetics is described in several excellent texts (Cornish-Bowden, Fundamentals of enzyme kinetics. Portland Press, 1995; Gutfreund, Kinetics for the life sciences. Receptors, transmitters and catalysis. Cambridge University Press, 1995).There are various ways to monitor changes in concentration of reactants, intermediates and products after mixing, but the most common way is to use changes in optical signals (absorbance or fluorescence) which often accompany reactions. Although absorbance can sometimes be used, fluorescence is often preferred because of its greater sensitivity, particularly in monitoring conformational changes. Such methods are continuous with good time resolution but they seldom permit the direct determination of the concentrations of individual species. Alternatively, samples may be taken from the reaction volume, mixed with a chemical quenching agent to stop the reaction, and their contents assessed by techniques such as HPLC. These methods can directly determine the concentrations of different species, but are discontinuous and have a limited time resolution.

  5. Effective and Robust Generalized Predictive Speed Control of Induction Motor

    Directory of Open Access Journals (Sweden)

    Patxi Alkorta

    2013-01-01

    Full Text Available This paper presents and validates a new proposal for effective speed vector control of induction motors based on linear Generalized Predictive Control (GPC law. The presented GPC-PI cascade configuration simplifies the design with regard to GPC-GPC cascade configuration, maintaining the advantages of the predictive control algorithm. The robust stability of the closed loop system is demonstrated by the poles placement method for several typical cases of uncertainties in induction motors. The controller has been tested using several simulations and experiments and has been compared with Proportional Integral Derivative (PID and Sliding Mode (SM control schemes, obtaining outstanding results in speed tracking even in the presence of parameter uncertainties, unknown load disturbance, and measurement noise in the loop signals, suggesting its use in industrial applications.

  6. Discrete-Time LPV Current Control of an Induction Motor

    DEFF Research Database (Denmark)

    Bendtsen, Jan Dimon; Trangbæk, Klaus

    2001-01-01

    In this paper we apply a new method for gain-scheduled output feedback control of nonlinear systems to current control of an induction motor. The method relies on recently developed controller synthesis results for linear parameter-varying (LPV) systems, where the controller synthesis is formulated...... as a set of linear matrix inequalities with full-block multipliers. A standard nonlinear model of the motor is then constructed and written on LPV form. We then show that, although originally developed in continuous time, the controller synthesis results can be applied to a discrete-time model as well...... without further complications. The synthesis method is applied to the model, yielding an LPV discrete-time controller. Finally, the efficiency of the control scheme is validated via simulations as well as experimentally on the actual induction motor, both in open-loop current control and when an outer...

  7. Discrete-Time LPV Current Control of an Induction Motor

    DEFF Research Database (Denmark)

    Bendtsen, Jan Dimon; Trangbæk, Klaus

    2003-01-01

    In this paper we apply a new method for gain-scheduled output feedback control of nonlinear systems to current control of an induction motor. The method relies on recently developed controller synthesis results for linear parameter-varying (LPV) systems, where the controller synthesis is formulated...... as a set of linear matrix inequalities with full-block multipliers. A standard nonlinear model of the motor is constructed and written on LPV form. We then show that, although originally developed in continuous time, the controller synthesis results can be applied to a discrete-time model as well without...... further complications. The synthesis method is applied to the model, yielding an LPV discrete-time controller. Finally, the efficiency of the control scheme is validated via simulations as well as on the actual induction motor, both in open-loop current control and when an outer speed control loop...

  8. Resonance ionization scheme development for europium

    CERN Document Server

    Chrysalidis, K; Fedosseev, V N; Marsh, B A; Naubereit, P; Rothe, S; Seiffert, C; Kron, T; Wendt, K

    2017-01-01

    Odd-parity autoionizing states of europium have been investigated by resonance ionization spectroscopy via two-step, two-resonance excitations. The aim of this work was to establish ionization schemes specifically suited for europium ion beam production using the ISOLDE Resonance Ionization Laser Ion Source (RILIS). 13 new RILIS-compatible ionization schemes are proposed. The scheme development was the first application of the Photo Ionization Spectroscopy Apparatus (PISA) which has recently been integrated into the RILIS setup.

  9. Resonance ionization scheme development for europium

    Energy Technology Data Exchange (ETDEWEB)

    Chrysalidis, K., E-mail: katerina.chrysalidis@cern.ch; Goodacre, T. Day; Fedosseev, V. N.; Marsh, B. A. [CERN (Switzerland); Naubereit, P. [Johannes Gutenberg-Universität, Institiut für Physik (Germany); Rothe, S.; Seiffert, C. [CERN (Switzerland); Kron, T.; Wendt, K. [Johannes Gutenberg-Universität, Institiut für Physik (Germany)

    2017-11-15

    Odd-parity autoionizing states of europium have been investigated by resonance ionization spectroscopy via two-step, two-resonance excitations. The aim of this work was to establish ionization schemes specifically suited for europium ion beam production using the ISOLDE Resonance Ionization Laser Ion Source (RILIS). 13 new RILIS-compatible ionization schemes are proposed. The scheme development was the first application of the Photo Ionization Spectroscopy Apparatus (PISA) which has recently been integrated into the RILIS setup.

  10. SIGNCRYPTION BASED ON DIFFERENT DIGITAL SIGNATURE SCHEMES

    OpenAIRE

    Adrian Atanasiu; Laura Savu

    2012-01-01

    This article presents two new signcryption schemes. The first one is based on Schnorr digital signature algorithm and the second one is using Proxy Signature scheme introduced by Mambo. Schnorr Signcryption has been implemented in a program and here are provided the steps of the algorithm, the results and some examples. The Mambo’s Proxy Signature is adapted for Shortened Digital Signature Standard, being part of a new Proxy Signcryption scheme.

  11. Optics design for CEPC double ring scheme

    Science.gov (United States)

    Wang, Yiwei; Su, Feng; Bai, Sha; Yu, Chenghui; Gao, Jie

    2017-12-01

    The CEPC is a future Circular Electron and Positron Collider proposed by China to mainly study the Higgs boson. Its baseline design is a double ring scheme and an alternative design is a partial double ring scheme. This paper will present the optics design for the main ring of the double ring scheme. The CEPC will also work as a W and Z factory. Compatible optics designs for a W and a Z modes will be presented as well.

  12. Wavelet Denoising within the Lifting Scheme Framework

    Directory of Open Access Journals (Sweden)

    M. P. Paskaš

    2012-11-01

    Full Text Available In this paper, we consider an example of the lifting scheme and present the results of the simple lifting scheme implementation using lazy transform. The paper is tutorial-oriented. The results are obtained by testing several common test signals for the signal denoising problem and using different threshold values. The lifting scheme represents an effective and flexible tool that can be used for introducing signal dependence into the problem by improving the wavelet properties.

  13. Induction, complexity, and economic methodology

    OpenAIRE

    Smith, Peter

    2009-01-01

    This paper focuses on induction, because the supposed weaknesses of that process are the main reason for favouring falsificationism, which plays an important part in scientific methodology generally; the paper is part of a wider study of economic methodology. The standard objections to, and paradoxes of, induction are reviewed, and this leads to the conclusion that the supposed ‘problem’ or ‘riddle’ of induction is a false one. It is an artefact of two assumptions: that the classic two-valued...

  14. Overview of Bearingless Induction Motors

    Directory of Open Access Journals (Sweden)

    Xiaodong Sun

    2014-01-01

    Full Text Available Bearingless induction motors combining functions of both torque generation and noncontact magnetic suspension together have attracted more and more attention in the past decades due to their definite advantages of compactness, simple structure, less maintenance, no wear particles, high rotational speed, and so forth. This paper overviews the key technologies of the bearingless induction motors, with emphasis on motor topologies, mathematical models, and control strategies. Particularly, in the control issues, the vector control, independent control, direct torque control, nonlinear decoupling control, sensorless control, and so forth are investigated. In addition, several possible development trends of the bearingless induction motors are also discussed.

  15. Robust Adaptive Reactive Power Control for Doubly Fed Induction Generator

    Directory of Open Access Journals (Sweden)

    Huabin Wen

    2014-01-01

    Full Text Available The problem of reactive power control for mains-side inverter (MSI in doubly fed induction generator (DFIG is studied in this paper. To accommodate the modelling nonlinearities and inherent uncertainties, a novel robust adaptive control algorithm for MSI is proposed by utilizing Lyapunov theory that ensures asymptotic stability of the system under unpredictable external disturbances and significant parametric uncertainties. The distinguishing benefit of the aforementioned scheme consists in its capabilities to maintain satisfactory performance under varying operation conditions without the need for manually redesigning or reprogramming the control gains in contrast to the commonly used PI/PID control. Simulations are also built to confirm the correctness and benefits of the control scheme.

  16. Sensitivity of Forecast Skill to Different Objective Analysis Schemes

    Science.gov (United States)

    Baker, W. E.

    1979-01-01

    Numerical weather forecasts are characterized by rapidly declining skill in the first 48 to 72 h. Recent estimates of the sources of forecast error indicate that the inaccurate specification of the initial conditions contributes substantially to this error. The sensitivity of the forecast skill to the initial conditions is examined by comparing a set of real-data experiments whose initial data were obtained with two different analysis schemes. Results are presented to emphasize the importance of the objective analysis techniques used in the assimilation of observational data.

  17. A new iterative speech enhancement scheme based on Kalman filtering

    DEFF Research Database (Denmark)

    Li, Chunjian; Andersen, Søren Vang

    2005-01-01

    A new iterative speech enhancement scheme that can be seen as an approximation to the Expectation-Maximization (EM) algorithm is proposed. The algorithm employs a Kalman filter that models the excitation source as a spectrally white process with a rapidly time-varying variance, which calls...... for a high temporal resolution estimation of this variance. A Local Variance Estimator based on a Prediction Error Kalman Filter is designed for this high temporal resolution variance estimation. To achieve fast convergence and avoid local maxima of the likelihood function, a Weighted Power Spectral...

  18. Kinetic inductance detectors for far-infrared spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Barlis, A., E-mail: abarlis@physics.upenn.edu [University of Pennsylvania Department of Physics and Astronomy, Philadelphia, Pennsylvania (United States); Aguirre, J. [University of Pennsylvania Department of Physics and Astronomy, Philadelphia, Pennsylvania (United States); Stevenson, T. [NASA Goddard Space Flight Center, Greenbelt, Maryland (United States)

    2016-07-11

    The star formation mechanisms at work in the early universe remain one of the major unsolved problems of modern astrophysics. Many of the luminous galaxies present during the period of peak star formation (at redshift of about 2.5) were heavily enshrouded in dust, which makes observing their properties difficult at optical wavelengths. However, many spectral lines exist at far-infrared wavelengths that serve as tracers of star formation. Here, we describe a detector system suitable for a balloon-borne spectroscopic intensity mapping experiment at far-infrared wavelengths. The system uses lumped-element kinetic inductance detectors (KIDs), which have the potential to achieve high sensitivity and low noise levels. KIDs consist of separate capacitive and inductive elements, and use the inductive element as the radiation absorber. We describe the design considerations, fabrication process, and readout scheme for a prototype LEKID array of 1600 pixels. - Highlights: • We describe a concept for a balloon-borne telescope for far-IR wavelengths. • Telescope would use high-sensitivity kinetic inductance detectors. • Design considerations and fabrication process for prototype detectors.

  19. Mixed ultrasoft/norm-conserved pseudopotential scheme

    DEFF Research Database (Denmark)

    Stokbro, Kurt

    1996-01-01

    A variant of the Vanderbilt ultrasoft pseudopotential scheme, where the norm conservation is released for only one or a few angular channels, is presented. Within this scheme some difficulties of the truly ultrasoft pseudopotentials are overcome without sacrificing the pseudopotential softness. (i......) Ghost states are easily avoided without including semicore shells. (ii) The ultrasoft pseudo-charge-augmentation functions can be made softer. (iii) The number of nonlocal operators is reduced. The scheme will be most useful for transition metals, and the feasibility and accuracy of the scheme...

  20. Central schemes for open-channel flow

    Science.gov (United States)

    Gottardi, Guido; Venutelli, Maurizio

    2003-03-01

    The resolution of the Saint-Venant equations for modelling shock phenomena in open-channel flow by using the second-order central schemes of Nessyahu and Tadmor (NT) and Kurganov and Tadmor (KT) is presented. The performances of the two schemes that we have extended to the non-homogeneous case and that of the classical first-order Lax-Friedrichs (LF) scheme in predicting dam-break and hydraulic jumps in rectangular open channels are investigated on the basis of different numerical and physical conditions. The efficiency and robustness of the schemes are tested by comparing model results with analytical or experimental solutions.

  1. A Robust Control Scheme for Medium-Voltage-Level DVR Implementation

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Loh, Poh Chiang; Li, Yun Wei

    2007-01-01

    of Hinfin controller weighting function selection, inner current loop tuning, and system disturbance rejection capability is presented. Finally, the designed control scheme is extensively tested on a laboratory 10-kV MV-level DVR system with varying voltage sag (balanced and unbalanced) and loading (linear......In this paper, a robust control scheme with an outer Hinfin voltage control loop and an inner current control loop is designed and implemented on a medium-voltage (MV)-level dynamic voltage restorer (DVR) system. Through a simple selection of weighting functions, the synthesized Hinfin controller....../nonlinear load and induction motor load) conditions. It is shown that the proposed control scheme is effective in both balanced and unbalanced sag compensation and load disturbance rejection, as its robustness is explicitly specified....

  2. Trapezoidal scheme for time-space fractional diffusion equation with Riesz derivative

    Science.gov (United States)

    Arshad, Sadia; Huang, Jianfei; Khaliq, Abdul Q. M.; Tang, Yifa

    2017-12-01

    In this paper, a finite difference scheme is proposed to solve time-space fractional diffusion equation which has second-order accuracy in both time and space direction. The time and space fractional derivatives are considered in the senses of Caputo and Riesz, respectively. First, the centered difference approach is used to approximate the Riesz fractional derivative in space. Then, the obtained fractional ordinary differential equations are transformed into equivalent Volterra integral equations. And then, the trapezoidal rule is utilized to approximate the Volterra integral equations. The stability and convergence of our scheme are proved via mathematical induction method. Finally, numerical experiments are performed to confirm the high accuracy and efficiency of our scheme.

  3. Survey of Inductive Communication Systems

    Science.gov (United States)

    1975-04-01

    A survey is made of various inductive systems proposed for low frequency train communication. It is found that thick dielectric jackets or coaxial and metallic shields may be required to reduce the environmental effects that lead to high attenuation....

  4. Fault diagnosis of induction motors

    CERN Document Server

    Faiz, Jawad; Joksimović, Gojko

    2017-01-01

    This book is a comprehensive, structural approach to fault diagnosis strategy. The different fault types, signal processing techniques, and loss characterisation are addressed in the book. This is essential reading for work with induction motors for transportation and energy.

  5. ORGANIZATIONAL DEVELOPMENT ACTION: INDUCTION PROGRAM

    National Research Council Canada - National Science Library

    José G. VARGAS-HERNÁNDEZ

    2016-01-01

    .... Also, an induction program is presented as an intervention proposal of organization development, on the premise that this program is a first step in the solving of the existing low productivity problem...

  6. Inductance and hypergeometric functions. II

    DEFF Research Database (Denmark)

    Karlsson, Per W.

    2000-01-01

    A previously obtained integral for the self-inductance of a solenoid is further transformed. The resulting formula involves double Kampé de Fériet functions which are analytic continuations rather than power series.......A previously obtained integral for the self-inductance of a solenoid is further transformed. The resulting formula involves double Kampé de Fériet functions which are analytic continuations rather than power series....

  7. Purinergic agonist induction of metallothionein.

    Science.gov (United States)

    Xiong, X; Garrett, S H; Arizono, K; Brady, F O

    1992-10-01

    Metallothionein (MT) protein is readily induced in vivo in rat liver by adenosine and adenosine agonists (2-chloroadenosine, 5-(N-ethyl) carboxamido adenosine, and 5-chloro-5-deoxyadenosine). These presumably operate via AMP/adenosine receptors of the P1 (A2) type, which use the cAMP pathway. ATP was ineffective as an inducer for MT. 2-Chloroadenosine was the most effective inducer (7.27-fold at 11 hr). This induction was blockable by the adenosine antagonists, caffeine and theophylline. MT protein induction by 2-chloroadenosine in primary cultured rat hepatocytes was modest (1.55-fold), but this was also blocked by theophylline. MT mRNA induction was assessed using dot blot and Northern gel assays. Large inductions by 2-chloroadenosine (5.1- to 41-fold) were seen, and these were detectable as early as 2 hr in vivo. Two rat hepatoma cell lines (EC3 and 2M) were studied in vitro. Modest inductions of MT mRNA were seen: 2.10-fold for EC3 and 4.12-fold for 2M. Our studies implicate the potential role of the purinergic system in the modulation of transcription of MT genes in rat liver. The sources of adenosine in vivo that might cause induction of MT mRNA and protein are not well defined, but adenosine may be important as a signal in stress response situations involving tissue damage, such as ischemia, hypoxia, and hemorrhagic shock.

  8. Time to Reconsider Stem Cell Induction Strategies

    Directory of Open Access Journals (Sweden)

    Hans-Werner Denker

    2012-12-01

    Full Text Available Recent developments in stem cell research suggest that it may be time to reconsider the current focus of stem cell induction strategies. During the previous five years, approximately, the induction of pluripotency in somatic cells, i.e., the generation of so-called ‘induced pluripotent stem cells’ (iPSCs, has become the focus of ongoing research in many stem cell laboratories, because this technology promises to overcome limitations (both technical and ethical seen in the production and use of embryonic stem cells (ESCs. A rapidly increasing number of publications suggest, however, that it is now possible to choose instead other, alternative ways of generating stem and progenitor cells bypassing pluripotency. These new strategies may offer important advantages with respect to ethics, as well as to safety considerations. The present communication discusses why these strategies may provide possibilities for an escape from the dilemma presented by pluripotent stem cells (self-organization potential, cloning by tetraploid complementation, patenting problems and tumor formation risk.

  9. Graphene synthesis via magnetic inductive heating of copper substrates.

    Science.gov (United States)

    Piner, Richard; Li, Huifeng; Kong, Xianghua; Tao, Li; Kholmanov, Iskandar N; Ji, Hengxing; Lee, Wi Hyoung; Suk, Ji Won; Ye, Jongpil; Hao, Yufeng; Chen, Shanshan; Magnuson, Carl W; Ismach, Ariel F; Akinwande, Deji; Ruoff, Rodney S

    2013-09-24

    Scaling graphene growth using an oven to heat large substrates becomes less energy efficient as system size is increased. We report a route to graphene synthesis in which radio frequency (RF) magnetic fields inductively heat metal foils, yielding graphene of quality comparable to or higher than that of current chemical vapor deposition techniques. RF induction heating allows for rapid temperature ramp up/down, with great potential for large scale and rapid manufacturing of graphene with much better energy efficiency. Back-gated field effect transistors on a SiO2/Si substrate showed carrier mobility up to ∼14 000 cm(2) V(-1) s(-1) measured under ambient conditions. Many advantages of RF heating are outlined, and some fundamental aspects of this approach are discussed.

  10. Nonstandard finite difference schemes for differential equations

    Directory of Open Access Journals (Sweden)

    Mohammad Mehdizadeh Khalsaraei

    2014-12-01

    Full Text Available In this paper, the reorganization of the denominator of the discrete derivative and nonlocal approximation of nonlinear terms are used in the design of nonstandard finite difference schemes (NSFDs. Numerical examples confirming then efficiency of schemes, for some differential equations are provided. In order to illustrate the accuracy of the new NSFDs, the numerical results are compared with standard methods.

  11. Privacy Preserving Mapping Schemes Supporting Comparison

    NARCIS (Netherlands)

    Tang, Qiang

    2010-01-01

    To cater to the privacy requirements in cloud computing, we introduce a new primitive, namely Privacy Preserving Mapping (PPM) schemes supporting comparison. An PPM scheme enables a user to map data items into images in such a way that, with a set of images, any entity can determine the <, =, >

  12. Sampling scheme optimization from hyperspectral data

    NARCIS (Netherlands)

    Debba, P.

    2006-01-01

    This thesis presents statistical sampling scheme optimization for geo-environ-menta] purposes on the basis of hyperspectral data. It integrates derived products of the hyperspectral remote sensing data into individual sampling schemes. Five different issues are being dealt with.First, the optimized

  13. Consolidation of the health insurance scheme

    CERN Multimedia

    Association du personnel

    2009-01-01

    In the last issue of Echo, we highlighted CERN’s obligation to guarantee a social security scheme for all employees, pensioners and their families. In that issue we talked about the first component: pensions. This time we shall discuss the other component: the CERN Health Insurance Scheme (CHIS).

  14. A hierarchical classification scheme of psoriasis images

    DEFF Research Database (Denmark)

    Maletti, Gabriela Mariel; Ersbøll, Bjarne Kjær

    2003-01-01

    A two-stage hierarchical classification scheme of psoriasis lesion images is proposed. These images are basically composed of three classes: normal skin, lesion and background. The scheme combines conventional tools to separate the skin from the background in the first stage, and the lesion from...

  15. Mobile Machine for E-payment Scheme

    OpenAIRE

    Sattar J Aboud

    2010-01-01

    In this article e-payment scheme by mobile machine is considered. The requirements for a mobile machine in e-payment are presented, particularly when merchant employing accounts for payments and when using advertising. In the proposed scheme we will use the public key infrastructure and certificate for authenticate purchaser and merchant and to secure the communication between them.

  16. THROUGHPUT ANALYSIS OF EXTENDED ARQ SCHEMES

    African Journals Online (AJOL)

    PUBLICATIONS1

    formation transmitted in digital communication systems. Such schemes ... Department of Electronics and Telecommunications Engineering,. University of Dar es ...... (2): 165-176. Kundaeli, H. N. (2013). Throughput-Delay. Analysis of the SR-ST-GBN ARQ Scheme. Mediterranean Journal of Electronics and. Communication.

  17. Time-Resolved Emittance Characterization of an Induction Linac Beam using Optical Transition Radiation

    Energy Technology Data Exchange (ETDEWEB)

    Le Sage, G P

    2002-11-05

    An induction linac is used by Lawrence Livermore National Laboratory to perform radiographic testing at the Flash X-ray Radiography facility. Emittance characterization is important since x-ray spot size impacts the resolution of shadow-graphs. Due to the long pulse length, high current, and beam energy, emittance measurement using Optical Transition Radiation is an attractive alternative for reasons that will be described in the text. The utility of OTR-based emittance measurement has been well demonstrated for both RF and induction linacs. We describe the time-resolved emittance characterization of an induction linac electron beam. We have refined the optical collection system for the induction linac application, and have demonstrated a new technique for probing the divergence of a subset of the beam profile. The experimental apparatus, data reduction, and conclusions will be presented. Additionally, a new scheme for characterizing the correlation between beam divergence and spatial coordinates within the beam profile will be described.

  18. Time-Resolved Emittance Characterization of an Induction Linac Beam using Optical Transition Radiation

    CERN Document Server

    Le Sage, G P

    2002-01-01

    An induction linac is used by Lawrence Livermore National Laboratory to perform radiographic testing at the Flash X-ray Radiography facility. Emittance characterization is important since x-ray spot size impacts the resolution of shadow-graphs. Due to the long pulse length, high current, and beam energy, emittance measurement using Optical Transition Radiation is an attractive alternative for reasons that will be described in the text. The utility of OTR-based emittance measurement has been well demonstrated for both RF and induction linacs. We describe the time-resolved emittance characterization of an induction linac electron beam. We have refined the optical collection system for the induction linac application, and have demonstrated a new technique for probing the divergence of a subset of the beam profile. The experimental apparatus, data reduction, and conclusions will be presented. Additionally, a new scheme for characterizing the correlation between beam divergence and spatial coordinates within the b...

  19. Fuzzy Logic Based Speed Control System for ThreePhase Induction Motor

    Directory of Open Access Journals (Sweden)

    Marwan A. Badran

    2013-05-01

    Full Text Available Three-phase induction motors have been used in a wide range of industry applications. Using modern technology, the speed of induction motor can be easily controlled by variable frequency drives (VFDs. These drives use high speed power transistors with various switching techniques, mainly PWM schemes. For several decades, conventional control systems were applied to electric drives to control the speed of induction motor. Although conventional controllers showed good results, but they still need tuning to obtain optimum results. The recent proposed control systems use fuzzy logic controller (FLC to enhance the performance of induction motor drives. In this paper, a fuzzy logic based speed control system is presented. The proposed controller has been designed with MATLAB/SIMULINK software, and it was tested for various operating conditions including load disturbance and sudden change of reference speed. The results showed better performance of the proposed controller compared with the conventional PI controller.

  20. Mapping service activity: the example of childhood obesity schemes in England

    Directory of Open Access Journals (Sweden)

    Roberts Helen

    2010-06-01

    Full Text Available Abstract Background Childhood obesity is high on the policy agenda of wealthier nations, and many interventions have been developed to address it. This work describes an overview of schemes for obese and overweight children and young people in England, and the 'mapping' approach we used. Methods Our search strategy, inclusion criteria and coding frame had to be suitable for describing a potentially large number of schemes within a short timeframe. Data were collected from key informants, scheme publicity and reports, and via a web-survey. To be included, schemes had to be based in England, follow a structured programme lasting at least two weeks, promote healthy weight, and be delivered exclusively to overweight and/or obese children and young people (age range 4-18. Data were entered into a coding frame recording similar information for each scheme, including any underpinning research evidence, evaluation or monitoring reports. Priority questions were identified in consultation with colleagues from the Department of Health and the Cross Government Obesity Unit. Results Fifty-one schemes were identified. Some operated in multiple areas, and by using estimates of the number of schemes provided by multi-site scheme leads, we found that between 314 and 375 local programmes were running at any time. Uncertainty is largely due to the largest scheme provider undergoing rapid expansion at the time of the mapping exercise and therefore able to provide only an estimate of the number of programmes running. Many schemes were similar in their approach, had been recently established and were following NICE guidelines on interventions to promote healthy weight. Rigorous evaluation was rare. Conclusions Our methods enabled us to produce a rapid overview of service activity across a wide geographic area and a range of organisations and sectors. In order to develop the evidence base for childhood obesity interventions, rigorous evaluation of these schemes is

  1. Enhanced Simulink Induction Motor Model for Education and Maintenance Training

    Directory of Open Access Journals (Sweden)

    Manuel Pineda-Sanchez

    2012-04-01

    Full Text Available The training of technicians in maintenance requires the use of signals produced by faulty machines in different operating conditions, which are difficult to obtain either from the industry or through destructive testing. Some tasks in electricity and control courses can also be complemented by an interactive induction machine model having a wider internal parameter configuration. This paper presents a new analytical model of induction machine under fault, which is able to simulate induction machines with rotor asymmetries and eccentricity in different load conditions, both stationary and transient states and yielding magnitudes such as currents, speed and torque. This model is faster computationally than the traditional method of simulating induction machine faults based on the Finite Element Method and also than other analytical models due to the rapid calculation of the inductances. The model is presented in Simulink by Matlab for the comprehension and interactivity with the students or lecturers and also to allow the easy combination of the effect of the fault with external influences, studying their consequences on a determined load or control system. An associated diagnosis tool is also presented.

  2. Modeling and Design of Brushless Doubly-Fed Induction Machines

    OpenAIRE

    Wang, X.

    2017-01-01

    The rapid increase of wind power in the power grid results in high grid connection requirements for wind turbines. Moreover, the reliability of wind turbines becomes more and more important, especially in offshore applications. One potential solution for these demands is the wind turbine drive-train based on the brushless doubly-fed induction machine (DFIM). This machine type has no brushes or slip-rings on the rotor side which provides an attractive alternative to the DFIM which is commonly ...

  3. Hybrid Pwm Switching Strategy for a Three-Level Inverter Fed Induction Motor Drive with Open-End Windings

    Science.gov (United States)

    Srinivas, S.; Ramachandrasekhar, K.

    2010-06-01

    A dual two-level inverter fed induction motor with open-end windings is capable of generating a three-level output voltage. Several, sine-triangle and space vector pulse width modulation (PWM) switching strategies are presented for the dual-inverter scheme either using space-vector or carrier-based implementation. In this paper, a hybrid PWM switching strategy for the dual-inverter scheme is proposed employing sine-triangle PWM (SPWM) and space vector PWM (SVPWM) for the individual inverters. SPWM is theoretically analyzed and space vector based implementation of SPWM is presented using a simple offset-time concept. This is exploited to implement the hybrid PWM switching strategy for the dual two-level inverter. The implementation of the hybrid PWM switching strategy proposed in this paper do not require any look-up tables, the switching is totally automatic obviating the time-consuming task of sector identification. The implementation of the hybrid PWM scheme requires only the three instantaneous phase reference voltages corresponding to the reference space vector. The third harmonic component in the voltage appearing across the motor phase windings in the induction motor is significantly reduced (by 50%) with the use of the proposed hybrid PWM scheme as compared to the use of the PWM scheme presented earlier. Also, the percentage weighted total harmonic distortion (%WTHD) of the output voltage is significantly reduced in the entire range of speed of the induction motor driven by the dual-inverter scheme.

  4. Hypnosis for induction of labour.

    Science.gov (United States)

    Nishi, Daisuke; Shirakawa, Miyako N; Ota, Erika; Hanada, Nobutsugu; Mori, Rintaro

    2014-08-14

    Induction of labour using pharmacological and mechanical methods can increase complications. Complementary and alternative medicine methods including hypnosis may have the potential to provide a safe alternative option for the induction of labour. However, the effectiveness of hypnosis for inducing labour has not yet been fully evaluated. To assess the effect of hypnosis for induction of labour compared with no intervention or any other interventions. We searched the Cochrane Pregnancy and Childbirth Group's Trials Register (31 January 2014), handsearched relevant conference proceedings, contacted key personnel and organisations in the field for published and unpublished references. All published and unpublished randomised controlled trials (RCTs) and cluster-RCTs of acceptable quality comparing hypnosis with no intervention or any other interventions, in which the primary outcome is to assess whether labour was induced. Two review authors assessed the one trial report that was identified (but was subsequently excluded). No RCTs or cluster-RCTs were identified from the search strategy. There was no evidence available from RCTs to assess the effect of hypnosis for induction of labour. Evidence from RCTs is required to evaluate the effectiveness and safety of this intervention for labour induction. As hypnosis may delay standard care (in case standard care is withheld during hypnosis), its use in induction of labour should be considered on a case-by-case basis.Future RCTs are required to examine the effectiveness and safety of hypnotic relaxation for induction of labour among pregnant women who have anxiety above a certain level. The length and timing of the intervention, as well as the staff training required, should be taken into consideration. Moreover, the views and experiences of women and staff should also be included in future RCTs.

  5. Estimation of physical parameters in induction motors

    DEFF Research Database (Denmark)

    Børsting, H.; Knudsen, Morten; Rasmussen, Henrik

    1994-01-01

    Parameter estimation in induction motors is a field of great interest, because accurate models are needed for robust dynamic control of induction motors......Parameter estimation in induction motors is a field of great interest, because accurate models are needed for robust dynamic control of induction motors...

  6. 14 CFR 25.1091 - Air induction.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Air induction. 25.1091 Section 25.1091... STANDARDS: TRANSPORT CATEGORY AIRPLANES Powerplant Induction System § 25.1091 Air induction. (a) The air induction system for each engine and auxiliary power unit must supply— (1) The air required by that engine...

  7. 14 CFR 27.1091 - Air induction.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Air induction. 27.1091 Section 27.1091... STANDARDS: NORMAL CATEGORY ROTORCRAFT Powerplant Induction System § 27.1091 Air induction. (a) The air induction system for each engine must supply the air required by that engine under the operating conditions...

  8. 14 CFR 29.1091 - Air induction.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Air induction. 29.1091 Section 29.1091... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Powerplant Induction System § 29.1091 Air induction. (a) The air induction system for each engine and auxiliary power unit must supply the air required by that engine and...

  9. Identification of first-stage labor arrest by electromyography in term nulliparous women after induction of labor

    NARCIS (Netherlands)

    Vasak, B.; Graatsma, E.M.; Hekman-Drost, E.; Eijkemans, M.J.; Leeuwen, J.H. van; Visser, G.H.; Jacod, B.C.

    2017-01-01

    INTRODUCTION: Worldwide induction and cesarean delivery rates have increased rapidly, with consequences for subsequent pregnancies. The majority of intrapartum cesarean deliveries are performed for failure to progress, typically in nulliparous women at term. Current uterine registration techniques

  10. Induction of formaldehyde contact sensitivity

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner; Boman, A; Vølund, A

    1985-01-01

    The sensitizing potential of aqueous formaldehyde was evaluated with the guinea pig maximization test (GPMT) in two laboratories (Copenhagen and Stockholm) using different guinea pig strains. Six intradermal (0.01%-3%), and 6 topical (0.5%-20%) concentrations were used for induction, and formalde......The sensitizing potential of aqueous formaldehyde was evaluated with the guinea pig maximization test (GPMT) in two laboratories (Copenhagen and Stockholm) using different guinea pig strains. Six intradermal (0.01%-3%), and 6 topical (0.5%-20%) concentrations were used for induction......, and formaldehyde 1% and 0.1% was used for challenge. The incidence of contact sensitivity depended on the intradermal, but not on the topical induction dose. Statistical analyses showed a non-monotonous (non-linear) dose response relationship. The estimated maximal sensitization rate in Copenhagen was 80% after...... intradermal induction with 0.65% formaldehyde; in Stockholm it was 84% after induction with 0.34%. The data from the two laboratories could be described by parallel displaced dose response curves suggesting that the guinea pig strain used in Stockholm was significantly more susceptible to formaldehyde than...

  11. Multipurpose 5-MeV linear induction accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Birx, D.L.; Hawkins, S.A.; Poor, S.E.; Reginato, L.L. Smith, M.W.

    1984-06-11

    Although linear induction accelerators (LIAs) are quite reliable by most standards, they are limited in repeating rate, average power, and reliability because the final stage of energy delivery is based on spark gap performance. In addition, they have a low duty factor of operation. To provide a higher burst rate and greater reliability, the researchers used new technology to develop a magnetic pulse compression scheme that eliminates all spark gaps and exceeds requirements. The paper describes the scheme. The magnetic drive system can be tailored to drive induction cells from a few kA to over 10 kA at 500 kV, with average beam power levels in the megawatts. This new 5-MeV, 2.5-kA LIA under construction at the Lawrence Livermore National Laboratory (LLNL) will be used for the development of high brightness sources and will provide a test bed for the new technology, which should lead to LIAs that surpass the radio frequency linacs for efficiency and reliability, as well as fit other industrial applications, such as sewage sterilization.

  12. Optimal Face-Iris Multimodal Fusion Scheme

    Directory of Open Access Journals (Sweden)

    Omid Sharifi

    2016-06-01

    Full Text Available Multimodal biometric systems are considered a way to minimize the limitations raised by single traits. This paper proposes new schemes based on score level, feature level and decision level fusion to efficiently fuse face and iris modalities. Log-Gabor transformation is applied as the feature extraction method on face and iris modalities. At each level of fusion, different schemes are proposed to improve the recognition performance and, finally, a combination of schemes at different fusion levels constructs an optimized and robust scheme. In this study, CASIA Iris Distance database is used to examine the robustness of all unimodal and multimodal schemes. In addition, Backtracking Search Algorithm (BSA, a novel population-based iterative evolutionary algorithm, is applied to improve the recognition accuracy of schemes by reducing the number of features and selecting the optimized weights for feature level and score level fusion, respectively. Experimental results on verification rates demonstrate a significant improvement of proposed fusion schemes over unimodal and multimodal fusion methods.

  13. Towards an "All Speed" Unstructured Upwind Scheme

    Science.gov (United States)

    Loh, Ching Y.; Jorgenson, Philip C.E.

    2009-01-01

    In the authors previous studies [1], a time-accurate, upwind finite volume method (ETAU scheme) for computing compressible flows on unstructured grids was proposed. The scheme is second order accurate in space and time and yields high resolution in the presence of discontinuities. The scheme features a multidimensional limiter and multidimensional numerical dissipation. These help to stabilize the numerical process and to overcome the annoying pathological behaviors of upwind schemes. In the present paper, it will be further shown that such multidimensional treatments also lead to a nearly all-speed or Mach number insensitive upwind scheme. For flows at very high Mach number, e.g., 10, local numerical instabilities or the pathological behaviors are suppressed, while for flows at very low Mach number, e.g., 0.02, computation can be directly carried out without invoking preconditioning. For flows in different Mach number regimes, i.e., low, medium, and high Mach numbers, one only needs to adjust one or two parameters in the scheme. Several examples with low and high Mach numbers are demonstrated in this paper. Thus, the ETAU scheme is applicable to a broad spectrum of flow regimes ranging from high supersonic to low subsonic, appropriate for both CFD (computational fluid dynamics) and CAA (computational aeroacoustics).

  14. Ponzi scheme diffusion in complex networks

    Science.gov (United States)

    Zhu, Anding; Fu, Peihua; Zhang, Qinghe; Chen, Zhenyue

    2017-08-01

    Ponzi schemes taking the form of Internet-based financial schemes have been negatively affecting China's economy for the last two years. Because there is currently a lack of modeling research on Ponzi scheme diffusion within social networks yet, we develop a potential-investor-divestor (PID) model to investigate the diffusion dynamics of Ponzi scheme in both homogeneous and inhomogeneous networks. Our simulation study of artificial and real Facebook social networks shows that the structure of investor networks does indeed affect the characteristics of dynamics. Both the average degree of distribution and the power-law degree of distribution will reduce the spreading critical threshold and will speed up the rate of diffusion. A high speed of diffusion is the key to alleviating the interest burden and improving the financial outcomes for the Ponzi scheme operator. The zero-crossing point of fund flux function we introduce proves to be a feasible index for reflecting the fast-worsening situation of fiscal instability and predicting the forthcoming collapse. The faster the scheme diffuses, the higher a peak it will reach and the sooner it will collapse. We should keep a vigilant eye on the harm of Ponzi scheme diffusion through modern social networks.

  15. Secure Electronic Cash Scheme with Anonymity Revocation

    Directory of Open Access Journals (Sweden)

    Baoyuan Kang

    2016-01-01

    Full Text Available In a popular electronic cash scheme, there are three participants: the bank, the customer, and the merchant. First, a customer opens an account in a bank. Then, he withdraws an e-cash from his account and pays it to a merchant. After checking the electronic cash’s validity, the merchant accepts it and deposits it to the bank. There are a number of requirements for an electronic cash scheme, such as, anonymity, unforgeability, unreusability, divisibility, transferability, and portability. Anonymity property of electronic cash schemes can ensure the privacy of payers. However, this anonymity property is easily abused by criminals. In 2011, Chen et al. proposed a novel electronic cash system with trustee-based anonymity revocation from pairing. On demand, the trustee can disclose the identity for e-cash. But, in this paper we point out that Chen et al.’s scheme is subjected to some drawbacks. To contribute secure electronic cash schemes, we propose a new offline electronic cash scheme with anonymity revocation. We also provide the formally security proofs of the unlinkability and unforgeability. Furthermore, the proposed scheme ensures the property of avoiding merchant frauds.

  16. Effect of Inductive Coil Geometry on the Thrust Efficiency of a Microwave Assisted Discharge Inductive Plasma Accelerator

    Science.gov (United States)

    Hallock, Ashley; Polzin, Kurt; Emsellem, Gregory

    2012-01-01

    Pulsed inductive plasma thrusters [1-3] are spacecraft propulsion devices in which electrical energy is capacitively stored and then discharged through an inductive coil. The thruster is electrodeless, with a time-varying current in the coil interacting with a plasma covering the face of the coil to induce a plasma current. Propellant is accelerated and expelled at a high exhaust velocity (O(10-100 km/s)) by the Lorentz body force arising from the interaction of the magnetic field and the induced plasma current. While this class of thruster mitigates the life-limiting issues associated with electrode erosion, pulsed inductive plasma thrusters require high pulse energies to inductively ionize propellant. The Microwave Assisted Discharge Inductive Plasma Accelerator (MAD-IPA) [4, 5] is a pulsed inductive plasma thruster that addressees this issue by partially ionizing propellant inside a conical inductive coil via an electron cyclotron resonance (ECR) discharge. The ECR plasma is produced using microwaves and permanent magnets that are arranged to create a thin resonance region along the inner surface of the coil, restricting plasma formation, and in turn current sheet formation, to a region where the magnetic coupling between the plasma and the inductive coil is high. The use of a conical theta-pinch coil is under investigation. The conical geometry serves to provide neutral propellant containment and plasma plume focusing that is improved relative to the more common planar geometry of the Pulsed Inductive Thruster (PIT) [2, 3], however a conical coil imparts a direct radial acceleration of the current sheet that serves to rapidly decouple the propellant from the coil, limiting the direct axial electromagnetic acceleration in favor of an indirect acceleration mechanism that requires significant heating of the propellant within the volume bounded by the current sheet. In this paper, we describe thrust stand measurements performed to characterize the performance

  17. Deitmar schemes, graphs and zeta functions

    Science.gov (United States)

    Mérida-Angulo, Manuel; Thas, Koen

    2017-07-01

    In Thas (2014) it was explained how one can naturally associate a Deitmar scheme (which is a scheme defined over the field with one element, F1) to a so-called ;loose graph; (which is a generalization of a graph). Several properties of the Deitmar scheme can be proven easily from the combinatorics of the (loose) graph, and known realizations of objects over F1 such as combinatorial F1-projective and F1-affine spaces exactly depict the loose graph which corresponds to the associated Deitmar scheme. In this paper, we first modify the construction of loc. cit., and show that Deitmar schemes which are defined by finite trees (with possible end points) are ;defined over F1; in Kurokawa's sense; we then derive a precise formula for the Kurokawa zeta function for such schemes (and so also for the counting polynomial of all associated Fq-schemes). As a corollary, we find a zeta function for all such trees which contains information such as the number of inner points and the spectrum of degrees, and which is thus very different than Ihara's zeta function (which is trivial in this case). Using a process called ;surgery,; we show that one can determine the zeta function of a general loose graph and its associated {Deitmar, Grothendieck}-schemes in a number of steps, eventually reducing the calculation essentially to trees. We study a number of classes of examples of loose graphs, and introduce the Grothendieck ring ofF1-schemes along the way in order to perform the calculations. Finally, we include a computer program for performing more tedious calculations, and compare the new zeta function to Ihara's zeta function for graphs in a number of examples.

  18. 38 CFR 21.282 - Effective date of induction into a rehabilitation program; retroactive induction.

    Science.gov (United States)

    2010-07-01

    ... induction into a rehabilitation program; retroactive induction. 21.282 Section 21.282 Pensions, Bonuses, and... Vocational Rehabilitation and Employment Under 38 U.S.C. Chapter 31 Induction into A Rehabilitation Program § 21.282 Effective date of induction into a rehabilitation program; retroactive induction. (a) Entering...

  19. On-line iron loss resistance identification by a state observer for rotor-flux-oriented control of induction motor

    Energy Technology Data Exchange (ETDEWEB)

    Barrera, Pablo M. de la; Bossio, Guillermo R.; Garcia, Guillermo O. [Grupo de Electronica Aplicada (GEA), Facultad de Ingenieria, UNRC, Ruta Nacional 36 Km. 601, X5804BYA, Rio Cuarto (Argentina); Solsona, Jorge A. [Instituto de Investigaciones en Ingenieria Electrica ' ' Alfredo Desages' ' , Departamento de Ingenieria Electrica y de Computadoras, UNS, Av. Alem 1253 (8000) Bahia Blanca (Argentina)

    2008-10-15

    A rotor flux state observer considering iron loss, for an Induction Motor (IM), is proposed. The aim of this proposal is to avoid detuning caused by the IM iron loss on a field-oriented control (FOC). An adaptive scheme for the K{sub Fe}, a parameter that represents the IM iron loss, is also proposed. The main objective of this scheme is to improve the dynamic response of control by compensating the variations of iron losses due to possible variations in the stator core characteristics. Simulation results demonstrated that the observer and the adaptive scheme showed a good performance fulfilling then the objectives. (author)

  20. Vector domain decomposition schemes for parabolic equations

    Science.gov (United States)

    Vabishchevich, P. N.

    2017-09-01

    A new class of domain decomposition schemes for finding approximate solutions of timedependent problems for partial differential equations is proposed and studied. A boundary value problem for a second-order parabolic equation is used as a model problem. The general approach to the construction of domain decomposition schemes is based on partition of unity. Specifically, a vector problem is set up for solving problems in individual subdomains. Stability conditions for vector regionally additive schemes of first- and second-order accuracy are obtained.

  1. Algebraic K-theory of generalized schemes

    DEFF Research Database (Denmark)

    Anevski, Stella Victoria Desiree

    and geometry over the field with one element. It also permits the construction of important Arakelov theoretical objects, such as the completion \\Spec Z of Spec Z. In this thesis, we prove a projective bundle theorem for the eld with one element and compute the Chow rings of the generalized schemes Sp\\ec ZN......Nikolai Durov has developed a generalization of conventional scheme theory in which commutative algebraic monads replace commutative unital rings as the basic algebraic objects. The resulting geometry is expressive enough to encompass conventional scheme theory, tropical algebraic geometry......, appearing in the construction of \\Spec Z....

  2. Galilean invariant resummation schemes of cosmological perturbations

    Science.gov (United States)

    Peloso, Marco; Pietroni, Massimo

    2017-01-01

    Many of the methods proposed so far to go beyond Standard Perturbation Theory break invariance under time-dependent boosts (denoted here as extended Galilean Invariance, or GI). This gives rise to spurious large scale effects which spoil the small scale predictions of these approximation schemes. By using consistency relations we derive fully non-perturbative constraints that GI imposes on correlation functions. We then introduce a method to quantify the amount of GI breaking of a given scheme, and to correct it by properly tailored counterterms. Finally, we formulate resummation schemes which are manifestly GI, discuss their general features, and implement them in the so called Time-Flow, or TRG, equations.

  3. Finite-volume scheme for anisotropic diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Es, Bram van, E-mail: bramiozo@gmail.com [Centrum Wiskunde & Informatica, P.O. Box 94079, 1090GB Amsterdam (Netherlands); FOM Institute DIFFER, Dutch Institute for Fundamental Energy Research, The Netherlands" 1 (Netherlands); Koren, Barry [Eindhoven University of Technology (Netherlands); Blank, Hugo J. de [FOM Institute DIFFER, Dutch Institute for Fundamental Energy Research, The Netherlands" 1 (Netherlands)

    2016-02-01

    In this paper, we apply a special finite-volume scheme, limited to smooth temperature distributions and Cartesian grids, to test the importance of connectivity of the finite volumes. The area of application is nuclear fusion plasma with field line aligned temperature gradients and extreme anisotropy. We apply the scheme to the anisotropic heat-conduction equation, and compare its results with those of existing finite-volume schemes for anisotropic diffusion. Also, we introduce a general model adaptation of the steady diffusion equation for extremely anisotropic diffusion problems with closed field lines.

  4. Cognitive radio networks dynamic resource allocation schemes

    CERN Document Server

    Wang, Shaowei

    2014-01-01

    This SpringerBrief presents a survey of dynamic resource allocation schemes in Cognitive Radio (CR) Systems, focusing on the spectral-efficiency and energy-efficiency in wireless networks. It also introduces a variety of dynamic resource allocation schemes for CR networks and provides a concise introduction of the landscape of CR technology. The author covers in detail the dynamic resource allocation problem for the motivations and challenges in CR systems. The Spectral- and Energy-Efficient resource allocation schemes are comprehensively investigated, including new insights into the trade-off

  5. Graph state-based quantum authentication scheme

    Science.gov (United States)

    Liao, Longxia; Peng, Xiaoqi; Shi, Jinjing; Guo, Ying

    2017-04-01

    Inspired by the special properties of the graph state, a quantum authentication scheme is proposed in this paper, which is implemented with the utilization of the graph state. Two entities, a reliable party, Trent, as a verifier and Alice as prover are included. Trent is responsible for registering Alice in the beginning and confirming Alice in the end. The proposed scheme is simple in structure and convenient to realize in the realistic physical system due to the use of the graph state in a one-way quantum channel. In addition, the security of the scheme is extensively analyzed and accordingly can resist the general individual attack strategies.

  6. Autonomous Droop Scheme With Reduced Generation Cost

    DEFF Research Database (Denmark)

    Nutkani, Inam Ullah; Loh, Poh Chiang; Wang, Peng

    2014-01-01

    . This objective might, however, not suit microgrids well since DGs are usually of different types, unlike synchronous generators. Other factors like cost, efficiency, and emission penalty of each DG at different loading must be considered since they contribute directly to the total generation cost (TGC......) of the microgrid. To reduce this TGC without relying on fast communication links, an autonomous droop scheme is proposed here, whose resulting power sharing is decided by the individual DG generation costs. Comparing it with the traditional scheme, the proposed scheme retains its simplicity and it is hence more...

  7. Induction brazing of complex joints

    DEFF Research Database (Denmark)

    Henningsen, Poul; Zhang, Wenqi; Bay, Niels

    2003-01-01

    Induction brazing is a fast and appropriate method for industrial joining of complex geometries and metal combinations. In all types of brazing processes it is important to heat the joint interface of the two materials to the same, high temperature. If one of the specimens is warmer than the other...... materials has large influence on the heating time and temperature distribution in induction heating. In order to ensure high and uniform temperature distribution near the interface of a joint between dissimilar materials the precise coil geometry and position is of great importance. The present paper...... presents a combined numerical and experimental method for fast determination of appropriate coil geometry and position in induction brazing tube-to-plate joints of different ratios between tube and plate thickness and different combinations of the materials stainless steel, brass and copper. The method has...

  8. Induction interview form in EDH

    CERN Multimedia

    Information technology Department, AIS (Administrative Information Services) Group,

    2007-01-01

    As part of the efforts to rationalise administrative procedures, the IT and HR Departments have developed a new EDH form for induction interviews, which can be accessed using the link below. In accordance with Administrative Circular No. 2 ('Recruitment, Appointment and possible developments regarding the contractual position of Staff Members', Rev. 3), the work and training objectives to be achieved during the probation period shall be specified in writing to all new staff members during an induction interview. The interview shall take place between the new staff member and his supervisor within six weeks of him taking up his duties at the latest. https://edh.cern.ch/Document/MAPS/Induction (or from the EDH desktop, by clicking on 'Other Tasks' and going to the 'HR & Training' heading) Please note that this form is to be used exclusively for new staff members. A separate EDH form will be developed for fellows. Information technology Department, AIS (Administrative Information Services) Group Human...

  9. Induction interview form in EDH

    CERN Multimedia

    Information technology Department, AIS (Administrative Information Services) Group

    2007-01-01

    As part of the efforts to rationalise administrative procedures, the IT and HR Departments have developed a new EDH form for induction interviews, which can be accessed using the link below. In accordance with Administrative Circular No. 2 ('Recruitment, Appointment and possible developments regarding the contractual position of Staff Members', Rev. 3), the work and training objectives to be achieved during the probation period shall be specified in writing to all new staff members during an induction interview. The interview shall take place between the new staff member and his supervisor within six weeks of his taking up his duties at the latest. https://edh.cern.ch/Document/MAPS/Induction1) (or from the EDH desktop, by clicking on 'Other Tasks' and going to the 'HR & Training' heading) Please note that this form is to be used exclusively for new staff members. A separate EDH form will be developed for fellows.Information technology Department, AIS (Administrative Information Services) Group Human Re...

  10. THE INDUCTION PERIOD IN PHOTOSYNTHESIS.

    Science.gov (United States)

    Smith, E L

    1937-11-20

    1. Measurements on the photosynthesis of Cabomba caroliniana show an induction period at low and high light intensities and CO(2) concentrations. 2. The equation which describes the data for Cabomba also describes the data obtained by other investigators on different species. The phenomenon is thus shown to be similar in plants representative of three phyla. 3. A derivation of the induction period equation is made from a consideration of the cycle of light and dark processes known to occur in photosynthesis. The equation indicates that light intensity enters as the square, and that the same light reactions are involved as those which affect the stationary state rates. However, a different dark reaction appears to limit photosynthesis during the induction period.

  11. Technological inductive power transfer systems

    Science.gov (United States)

    Madzharov, Nikolay D.; Nemkov, Valentin S.

    2017-05-01

    Inductive power transfer is a very fast expanding technology with multiple design principles and practical implementations ranging from charging phones and computers to bionic systems, car chargers and continuous power transfer in technological lines. Only a group of devices working in near magnetic field is considered. This article is devoted to overview of different inductive power transfer (IPT) devices. The review of literature in this area showed that industrial IPT are not much discussed and examined. The authors have experience in design and implementation of several types of IPTs belonging to wireless automotive chargers and to industrial application group. Main attention in the article is paid to principles and design of technological IPTs

  12. Password authentication scheme based on the quadratic residue problem

    Science.gov (United States)

    Ali, Muhammad Helmi; Ismail, Eddie Shahril

    2017-04-01

    In this paper, we propose a new password-authentication scheme based on quadratic residue problem with the following advantages: the scheme does not require a verification file, and the scheme can withstand replay attacks and resist from the guessing and impersonation attacks. We next discuss the advantages of our designated scheme over other schemes in terms of security and efficiency.

  13. A survey of Strong Convergent Schemes for the Simulation of ...

    African Journals Online (AJOL)

    We considered strong convergent stochastic schemes for the simulation of stochastic differential equations. The stochastic Taylor's expansion, which is the main tool used for the derivation of strong convergent schemes; the Euler Maruyama, Milstein scheme, stochastic multistep schemes, Implicit and Explicit schemes were ...

  14. Sensor fault detection and isolation in doubly-fed induction generators accounting for parameter variations

    Energy Technology Data Exchange (ETDEWEB)

    Galvez-Carrillo, Manuel; Kinnaert, Michel [Dept. of Control Engineering and System Analysis, Universite Libre de Bruxelles (ULB), 50 Av. F.D. Roosevelt, CP 165/55, B-1050 Brussels (Belgium)

    2011-05-15

    A fault detection and isolation (FDI) system for monitoring rotor current sensors in a doubly-fed induction generator (DFIG) for wind turbine applications is presented. The FDI system is designed so that the effect of parameter variations (resistances and inductances) is minimized. The residual generation is based on the generalized observer scheme (GOS) including parameter estimation. A decision system made of a combination of vector CUSUM (Cumulative sum) algorithms is used to process the residual vector and to achieve detection and isolation of incipient (small magnitude) faults. The approach is validated using signals obtained from a simulated vector-controlled DFIG. (author)

  15. Fault-tolerant Control of Inverter-fed Induction Motor Drives

    DEFF Research Database (Denmark)

    Thybo, C.

    The main purpose of this work was to investigate how fault-tolerant control (FTC) could be included in the control scheme of frequency converter fed induction motor applications. This was approached by identifying the potential failure modes for which fault tolerant control should be applied...... a current sensor fault, by switching to a closed loop scalar controller, was analysed. The main contributions of this work are · An investigation of the potential failure modes of inverter fed induction motor drives. · An extension of the FTC development cycle, to include economical cost-benefit analysis...

  16. An induction heating device using planar coil with high amplitude alternating magnetic fields for magnetic hyperthermia.

    Science.gov (United States)

    Wu, Zuhe; Zhuo, Zihang; Cai, Dongyang; Wu, Jian'an; Wang, Jie; Tang, Jintian

    2015-01-01

    Induction heating devices using the induction coil and magnetic nanoparticles (MNPs) are the way that the magnetic hyperthermia is heading. To facilitate the induction heating of in vivo magnetic nanoparticles in hyperthermia experiments on large animals. An induction heating device using a planar coil was designed with a magnetic field frequency of 328 kHz. The coil's magnetic field distribution and the device's induction heating performance on different concentrations of magnetic nanoparticles were measured. The alternating magnetic field produced in the axis position 165 mm away from the coil center is 40 Gs in amplitude; magnetic nanoparticles with a concentration higher than 80 mg. mL-1 can be heated up rapidly. Our results demonstrate that the device can be applied not only to in vitro and in small animal experiments of magnetic hyperthermia using MNPs, but also in large animal experiments.

  17. A Class of Speed Sensorless Sliding Mode Observers for Direct Torque Controlled Induction Motor Drives

    DEFF Research Database (Denmark)

    Lascu, Cristian; Boldea, Ion; Blaabjerg, Frede

    2004-01-01

    A family of speed-sensorless sliding-mode observers for induction motors has been developed. Three topologies have been investigated in order to determine their feasibility, parameter sensitivity and practical applicability. The salient feature of all schemes is that they do not require the rotor...... speed adaptation, that is, they are inherently sensorless observers. The most versatile is a dual-reference-frame observer. The other two schemes, implemented in stator frame and rotor frame, respectively, are simpler and are insensitive to detuning some of the motor parameters. Main theoretical aspects...

  18. Designing optimal sampling schemes for field visits

    CSIR Research Space (South Africa)

    Debba, Pravesh

    2008-10-01

    Full Text Available This is a presentation of a statistical method for deriving optimal spatial sampling schemes. The research focuses on ground verification of minerals derived from hyperspectral data. Spectral angle mapper (SAM) and spectral feature fitting (SFF...

  19. A Climate Classification Scheme for Habitable Worlds

    Science.gov (United States)

    Byrne, J. F.

    2017-11-01

    This presentation will include an exploration of the internal/external forcings and variability associated with climate using Earth as a reference model in addition to a classification scheme consisting of five categories.

  20. Secure Wake-Up Scheme for WBANs

    Science.gov (United States)

    Liu, Jing-Wei; Ameen, Moshaddique Al; Kwak, Kyung-Sup

    Network life time and hence device life time is one of the fundamental metrics in wireless body area networks (WBAN). To prolong it, especially those of implanted sensors, each node must conserve its energy as much as possible. While a variety of wake-up/sleep mechanisms have been proposed, the wake-up radio potentially serves as a vehicle to introduce vulnerabilities and attacks to WBAN, eventually resulting in its malfunctions. In this paper, we propose a novel secure wake-up scheme, in which a wake-up authentication code (WAC) is employed to ensure that a BAN Node (BN) is woken up by the correct BAN Network Controller (BNC) rather than unintended users or malicious attackers. The scheme is thus particularly implemented by a two-radio architecture. We show that our scheme provides higher security while consuming less energy than the existing schemes.

  1. Renormalization scheme dependence with renormalization group summation

    Science.gov (United States)

    McKeon, D. G. C.

    2015-08-01

    We consider all perturbative radiative corrections to the total e+e- annihilation cross section Re+e- showing how the renormalization group (RG) equation associated with the radiatively induced mass scale μ can be used to sum the logarithmic contributions in two ways. First of all, one can sum leading-log, next-to-leading-log, etc., contributions to Re+e- using in turn the one-loop, two-loop, etc., contributions to the RG function β . A second summation shows how all logarithmic corrections to Re+e- can be expressed entirely in terms of the log-independent contributions when one employs the full β -function. Next, using Stevenson's characterization of any choice of renormalization scheme by the use of the contributions to the β -function arising beyond two-loop order, we examine the RG scheme dependence in Re+e- when using the second way of summing logarithms. The renormalization scheme invariants that arise are then related to the renormalization scheme invariants found by Stevenson. We next consider two choices of the renormalization scheme, one which can be used to express Re+e- solely in terms of two powers of a running coupling, and the second which can be used to express Re+e- as an infinite series in the two-loop running coupling (i.e., a Lambert W -function). In both cases, Re+e- is expressed solely in terms of renormalization scheme invariant parameters that are to be computed by a perturbative evaluation of Re+e-. We then establish how in general the coupling constant arising in one renormalization scheme can be expressed as a power series of the coupling arising in any other scheme. We then establish how, by using a different renormalization mass scale at each order of perturbation theory, all renormalization scheme dependence can be absorbed into these mass scales when one uses the second way of summing logarithmic corrections to Re+e-. We then employ the approach to renormalization scheme dependency that we have applied to Re+e- to a RG summed

  2. Asynchronous Communication Scheme For Hypercube Computer

    Science.gov (United States)

    Madan, Herb S.

    1988-01-01

    Scheme devised for asynchronous-message communication system for Mark III hypercube concurrent-processor network. Network consists of up to 1,024 processing elements connected electrically as though were at corners of 10-dimensional cube. Each node contains two Motorola 68020 processors along with Motorola 68881 floating-point processor utilizing up to 4 megabytes of shared dynamic random-access memory. Scheme intended to support applications requiring passage of both polled or solicited and unsolicited messages.

  3. Navigators’ Behavior in Traffic Separation Schemes

    Directory of Open Access Journals (Sweden)

    Zbigniew Pietrzykowski

    2015-03-01

    Full Text Available One of the areas of decision support in the navigational ship conduct process is a Traffic Separation Scheme. TSSs are established in areas with high traffic density, often near the shore and in port approaches. The main purpose of these schemes is to improve maritime safety by channeling vessel traffic into streams. Traffic regulations as well as ships behavior in real conditions in chosen TSSs have been analyzed in order to develop decision support algorithms.

  4. Readout scheme of the upgraded ALICE TPC

    CERN Document Server

    Appelshaeuser, Harald; Ivanov, Marian; Lippmann, Christian; Wiechula, Jens

    2016-01-01

    In this document, we present the updated readout scheme for the ALICE TPC Upgrade. Two major design changes are implemented with respect to the concept that was presented in the TPC Upgrade Technical Design Report: – The SAMPA front-end ASIC will be used in direct readout mode. – The ADC sampling frequency will be reduced from 10 to 5 MHz. The main results from simulations and a description of the new readout scheme is outlined.

  5. Dynamic Restarting Schemes for Eigenvalue Problems

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Kesheng; Simon, Horst D.

    1999-03-10

    In studies of restarted Davidson method, a dynamic thick-restart scheme was found to be excellent in improving the overall effectiveness of the eigen value method. This paper extends the study of the dynamic thick-restart scheme to the Lanczos method for symmetric eigen value problems and systematically explore a range of heuristics and strategies. We conduct a series of numerical tests to determine their relative strength and weakness on a class of electronic structure calculation problems.

  6. HTS axial flux induction motor with analytic and FEA modeling

    Energy Technology Data Exchange (ETDEWEB)

    Li, S., E-mail: alexlee.zn@gmail.com; Fan, Y.; Fang, J.; Qin, W.; Lv, G.; Li, J.H.

    2013-11-15

    Highlights: •A high temperature superconductor axial flux induction motor and a novel maglev scheme are presented. •Analytic method and finite element method have been adopted to model the motor and to calculate the force. •Magnetic field distribution in HTS coil is calculated by analytic method. •An effective method to improve the critical current of HTS coil is presented. •AC losses of HTS coils in the HTS axial flux induction motor are estimated and tested. -- Abstract: This paper presents a high-temperature superconductor (HTS) axial-flux induction motor, which can output levitation force and torque simultaneously. In order to analyze the character of the force, analytic method and finite element method are adopted to model the motor. To make sure the HTS can carry sufficiently large current and work well, the magnetic field distribution in HTS coil is calculated. An effective method to improve the critical current of HTS coil is presented. Then, AC losses in HTS windings in the motor are estimated and tested.

  7. Dirac Induction for loop groups

    NARCIS (Netherlands)

    Posthuma, H.

    2011-01-01

    Using a coset version of the cubic Dirac operators for affine Lie algebras, we give an algebraic construction of the Dirac induction homomorphism for loop group representations. With this, we prove a homogeneous generalization of the Weyl-Kac character formula and show compatibility with Dirac

  8. Mathematical Induction: Deductive Logic Perspective

    Science.gov (United States)

    Dogan, Hamide

    2016-01-01

    Many studies mentioned the deductive nature of Mathematical Induction (MI) proofs but almost all fell short in explaining its potential role in the formation of the misconceptions reported in the literature. This paper is the first of its kind looking at the misconceptions from the perspective of the abstract of the deductive logic from one's…

  9. Inductive logic on conceptual spaces

    NARCIS (Netherlands)

    Sznajder, Marta

    2017-01-01

    This thesis investigates the question of how conceptual frameworks influence inductive reasoning. A conceptual framework is a collection of concepts used for a particular purpose; we can think of it as a semantic environment in which observations, or evidence, are recorded, and beliefs are formed

  10. Phonotactics in inductive logic programming

    NARCIS (Netherlands)

    Nerbonne, J.; Konstantopoulos, S.; Klopotek, M.A.; Wierzchon, S.T.; Trojanowski, K.

    2004-01-01

    We examine the results of applying inductive logic programming (ILP) to a relatively simple linguistic task, that of recognizing monosyllables in one language. ILP is suited to linguistic problems given linguists' preference for formulating their theories in discrete rules, and because of ILP's

  11. Teaching the Photoelectric Effect Inductively

    Science.gov (United States)

    Sokolowski, Andrzej

    2013-01-01

    Research has shown that students have difficulty understanding the underlying process of the photoelectric effect. Thus, this study sought to utilize an inductively situated lesson for teaching the photoelectric effect, hypothesizing that this type of enquiry would help learners delve deeper into the principles of the phenomenon and provide a…

  12. Induction studies with satellite data

    DEFF Research Database (Denmark)

    Olsen, Nils

    1999-01-01

    satellites. The results of several induction studies with scalar satellite data (from the POGO satellites) and with vector data (from the Magsat mission) demonstrate the ability to probe the Earth's conductivity from space. However, compared to the results obtained with ground data the satellite results...

  13. Ultra-Low Inductance Design for a GaN HEMT Based 3L-ANPC Inverter

    DEFF Research Database (Denmark)

    Gurpinar, Emre; Castellazzi, Alberto; Iannuzzo, Francesco

    2016-01-01

    In this paper, an ultra-low inductance power cell design for a 3L-ANPC based on 650 V GaN HEMT devices is presented. The 3L-ANPC topology with GaN HEMT devices and the selected modulation scheme suitable for wide-bandgap (WBG) devices are presented. The commutation loops, which are the main contr...

  14. A class of flux observers for doubly-fed induction generators used in small power wind generation systems

    DEFF Research Database (Denmark)

    Lascu, C.; Boldea, I.; Blaabjerg, Frede

    2013-01-01

    This paper investigates a family of stator and rotor flux observers for sensorless operation of doubly-fed induction generators (DFIG). Four stator flux observer topologies are described and compared. All proposed schemes use the voltage and current models connected in parallel or in series. For ...

  15. A Class of Speed-Sensorless Sliding-Mode Observers for High-Performance Induction Motor Drives

    DEFF Research Database (Denmark)

    Lascu, Christian; Boldea, Ion; Blaabjerg, Frede

    2009-01-01

    A new family of speed-sensorless sliding-mode observers for induction motor drives has been developed. Three topologies are investigated in order to determine their feasibility, parameter sensitivity, and practical applicability. The most significant feature of all schemes is that they do...

  16. Study of Direct Torque Controlled 3-phase SCIM with Two and Three-level Inverters using ST-DTC and FR-DTC scheme

    Directory of Open Access Journals (Sweden)

    P. R. Tripathy

    2015-02-01

    Full Text Available DTC control strategy helps to obtain fast and smooth control in 3–phase induction motors. It does not depend upon the machine parameters and transformation of reference frames. Various control strategies on the Direct Torque Control (DTC scheme have been carried out in the present study. The suggested scheme is meant for designing the low cost control circuit for DTC implementation on 3-phase SCIM. Three schemes with two types of inverters have been simulated in MATLAB (Simulink environment and the THD ratio in each case has been studied along with Fast Fourier Transform (FFT tools to compare the advantages.

  17. Intelligent robust control law for induction motors based on field-oriented control theory

    Energy Technology Data Exchange (ETDEWEB)

    Barambones, O.; Alcorta, P.; Sevillano, G.; Garrido, A.; Garrido, I. [Univ. del Pais Vasco, Bilbao (Spain). Dpto. Ingenieri a de Sistemas y Automatica

    2009-07-01

    A sensorless adaptive control law was developed to improve the trajectory tracking performance of induction motors. The law used an integral sliding mode algorithm to avoid the necessity of calculating an upper bound for system uncertainties. The vector control theory was used to develop the induction motor drives. The sliding mode control law incorporated an adaptive switching gain and included a method of estimating rotor speeds. Rotor speed estimation errors were presented as a first order simple function based on the difference between real stator currents and estimated stator currents. The Lyapunov stability theory was used to analyze the controller under different load disturbances and parameter uncertainties. Results of the study showed that the control signal of the scheme was smaller than signals obtained using traditional variable structure control schemes. It was concluded that speed tracking objectives can be obtained under various parameter and torque uncertainties. 9 refs., 7 figs.

  18. Speed control of switched reluctance motors taking into account mutual inductances and magnetic saturation effects

    Energy Technology Data Exchange (ETDEWEB)

    Alrifai, M., E-mail: alrifm@eng.kuniv.edu.k [Electrical Engineering Department, College of Engineering and Petroleum, Kuwait University, P.O. Box 5969, Safat 13060 (Kuwait); Zribi, M.; Rayan, M. [Electrical Engineering Department, College of Engineering and Petroleum, Kuwait University, P.O. Box 5969, Safat 13060 (Kuwait); Krishnan, R. [Center for Rapid Transit Systems, Electrical and Computer Engineering Department, Virginia Tech University, 461 Durham Hall, Blacksburg, VA 24061-011 (United States)

    2010-06-15

    This paper deals with the speed control of switched reluctance motor (SRM) drives taking into account the effects of the mutual inductances between two adjacent phases and the effects of the magnetic saturation of the core. To overcome the problems commonly associated with single-phase excitation, a nonlinear SRM model, which is suitable for two-phase excitation and which takes into account the effects of mutual inductances between two adjacent phases and the magnetic saturation effects, is considered in the design of the proposed controllers. A feedback linearization control scheme and a sliding mode control scheme are designed for this motor drive. The proposed controllers guarantee the convergence of the phase currents and the rotor speed of the motor to their desired values. Simulation results indicate that the proposed controllers work well and that they are robust to changes in the parameters of the system and to changes in the load torque.

  19. Rapid calibration of beryllium shims of Nigeria Research Reactor-1 ...

    African Journals Online (AJOL)

    Windows environment to carry out the required calibration automatically. It also facilitates rapid recalibration and verification whenever the need arises. It is shown that the scheme results in huge savings in labour and time as well as improved reliability when compared with the traditional manual method of shim calibration.

  20. SDN-Based Mobile Data Offloading Scheme Using a Femtocell and WiFi Networks

    Directory of Open Access Journals (Sweden)

    Chang-Woo Ahn

    2017-01-01

    Full Text Available Because of the many applications running on smartphones, the load of mobile data traffic on cellular networks is increasing rapidly. A femtocell is a solution to increase the cellular network capacity and coverage. However, because it uses the same frequency bands as a macrocell, interference problems have prevented its widespread adoption. In this paper, we propose a scheme for traffic offloading between femtocells and WiFi networks utilizing software-defined networking (SDN technology. In the proposed offloading scheme, the SDN technology allows a terminal to maintain existing sessions after offloading through a centralized control of the SDN-based equipment. We also propose an offloading target selection scheme based on available bandwidth estimation and an association control mechanism to reduce the femtocell load while ensuring quality of service (QoS in terms of throughput. Experimental results on an actual testbed showed that the proposed offloading scheme provides seamless connectivity and reduces the femtocell load by up to 46% with the aid of the proposed target selection scheme, while ensuring QoS after offloading. We also observed that the proposed target selection scheme offloads 28% more traffic to WiFi networks compared to received signal strength indicator-based target selection in a low background traffic environment.

  1. A Novel Certificateless Signature Scheme for Smart Objects in the Internet-of-Things

    Science.gov (United States)

    Yeh, Kuo-Hui; Su, Chunhua; Choo, Kim-Kwang Raymond; Chiu, Wayne

    2017-01-01

    Rapid advances in wireless communications and pervasive computing technologies have resulted in increasing interest and popularity of Internet-of-Things (IoT) architecture, ubiquitously providing intelligence and convenience to our daily life. In IoT-based network environments, smart objects are embedded everywhere as ubiquitous things connected in a pervasive manner. Ensuring security for interactions between these smart things is significantly more important, and a topic of ongoing interest. In this paper, we present a certificateless signature scheme for smart objects in IoT-based pervasive computing environments. We evaluate the utility of the proposed scheme in IoT-oriented testbeds, i.e., Arduino Uno and Raspberry PI 2. Experiment results present the practicability of the proposed scheme. Moreover, we revisit the scheme of Wang et al. (2015) and revealed that a malicious super type I adversary can easily forge a legitimate signature to cheat any receiver as he/she wishes in the scheme. The superiority of the proposed certificateless signature scheme over relevant studies is demonstrated in terms of the summarized security and performance comparisons. PMID:28468313

  2. A Novel Certificateless Signature Scheme for Smart Objects in the Internet-of-Things

    Directory of Open Access Journals (Sweden)

    Kuo-Hui Yeh

    2017-05-01

    Full Text Available Rapid advances in wireless communications and pervasive computing technologies have resulted in increasing interest and popularity of Internet-of-Things (IoT architecture, ubiquitously providing intelligence and convenience to our daily life. In IoT-based network environments, smart objects are embedded everywhere as ubiquitous things connected in a pervasive manner. Ensuring security for interactions between these smart things is significantly more important, and a topic of ongoing interest. In this paper, we present a certificateless signature scheme for smart objects in IoT-based pervasive computing environments. We evaluate the utility of the proposed scheme in IoT-oriented testbeds, i.e., Arduino Uno and Raspberry PI 2. Experiment results present the practicability of the proposed scheme. Moreover, we revisit the scheme of Wang et al. (2015 and revealed that a malicious super type I adversary can easily forge a legitimate signature to cheat any receiver as he/she wishes in the scheme. The superiority of the proposed certificateless signature scheme over relevant studies is demonstrated in terms of the summarized security and performance comparisons.

  3. A Novel Certificateless Signature Scheme for Smart Objects in the Internet-of-Things.

    Science.gov (United States)

    Yeh, Kuo-Hui; Su, Chunhua; Choo, Kim-Kwang Raymond; Chiu, Wayne

    2017-05-01

    Rapid advances in wireless communications and pervasive computing technologies have resulted in increasing interest and popularity of Internet-of-Things (IoT) architecture, ubiquitously providing intelligence and convenience to our daily life. In IoT-based network environments, smart objects are embedded everywhere as ubiquitous things connected in a pervasive manner. Ensuring security for interactions between these smart things is significantly more important, and a topic of ongoing interest. In this paper, we present a certificateless signature scheme for smart objects in IoT-based pervasive computing environments. We evaluate the utility of the proposed scheme in IoT-oriented testbeds, i.e., Arduino Uno and Raspberry PI 2. Experiment results present the practicability of the proposed scheme. Moreover, we revisit the scheme of Wang et al. (2015) and revealed that a malicious super type I adversary can easily forge a legitimate signature to cheat any receiver as he/she wishes in the scheme. The superiority of the proposed certificateless signature scheme over relevant studies is demonstrated in terms of the summarized security and performance comparisons.

  4. Performance Analysis Of Active Queue Management AQM In VOIP Using Different Voice Encoder Scheme

    OpenAIRE

    Samir Eid Mohammed; Mohamed H. M. Nerma

    2015-01-01

    Abstract Voice over Internet Protocol VoIP is a rapidly growing technology that enables transport of voice over data networks such as Ethernet Wide area networks WANs due to this important different codec scheme is developed to meet the QoS requirements. This thesis presents a comprehensive study about the impact of active queue management AQM on Voice over Internet Protocol VoIP quality of service using different codec scheme such as G711 G723 G729 and GSM using simulations tools. The evalua...

  5. Nonlinear Observer-Based Robust Passive Control of Doubly-Fed Induction Generators for Power System Stability Enhancement via Energy Reshaping

    Directory of Open Access Journals (Sweden)

    Jun Dong

    2017-07-01

    Full Text Available The large-scale penetration of wind power might lead to degradation of the power system stability due to its inherent feature of randomness. Hence, proper control designs which can effectively handle various uncertainties become very crucial. This paper designs a novel robust passive control (RPC scheme of a doubly-fed induction generator (DFIG for power system stability enhancement. The combinatorial effect of generator nonlinearities and parameter uncertainties, unmodelled dynamics, wind speed randomness, is aggregated into a perturbation, which is rapidly estimated by a nonlinear extended state observer (ESO in real-time. Then, the perturbation estimate is fully compensated by a robust passive controller to realize a globally consistent control performance, in which the energy of the closed-loop system is carefully reshaped through output feedback passification, such that a considerable system damping can be injected to improve the transient responses of DFIG in various operation conditions of power systems. Six case studies are carried out while simulation results verify that RPC can rapidly stabilize the disturbed DFIG system much faster with less overshoot, as well as supress power oscillations more effectively compared to that of linear proportional-integral-derivative (PID control and nonlinear feedback linearization control (FLC.

  6. Combining image-processing and image compression schemes

    Science.gov (United States)

    Greenspan, H.; Lee, M.-C.

    1995-01-01

    An investigation into the combining of image-processing schemes, specifically an image enhancement scheme, with existing compression schemes is discussed. Results are presented on the pyramid coding scheme, the subband coding scheme, and progressive transmission. Encouraging results are demonstrated for the combination of image enhancement and pyramid image coding schemes, especially at low bit rates. Adding the enhancement scheme to progressive image transmission allows enhanced visual perception at low resolutions. In addition, further progressing of the transmitted images, such as edge detection schemes, can gain from the added image resolution via the enhancement.

  7. Dual-Electrical-Port Control of Cascaded Doubly-Fed Induction Machine for EV/HEV Applications

    DEFF Research Database (Denmark)

    Han, Peng; Cheng, Ming; Chen, Zhe

    2017-01-01

    This paper presents a dual-electrical-port control scheme for four-quadrant operation of cascaded doubly-fed induction machine (CDFIM), which has conventionally been used as a variable-speed drive or variable-speed constant-frequency generator for limited-speed-range applications. The proposed......-electrical-port control scheme. It is for the first time revealed that the CDFIM drive that indirectly couples PW and CW through induction behavior can be readily controlled like a conventional induction motor to achieve the highest torque density. The torque density-speed region of the CDFIM falls within...... that of the power machine in singly-fed operation mode, and only a half of that of the power machine in doubly-fed operation mode, which shows the urgent need for torque density enhancement of brushless doubly-fed machines for electric vehicle/hybrid electric vehicle applications. Computer simulations...

  8. Nonlinear decoupling of torque and field amplitude in an induction motor

    Energy Technology Data Exchange (ETDEWEB)

    Rasmussen, H. [Aalborg University, Aalborg (Denmark); Vadstrup, P.; Boersting, H. [Grundfos A/S, Bjerringbro (Denmark)

    1997-12-31

    A novel approach to control of induction motors, based on nonlinear state feedback, is presented. The resulting scheme gives a linearized input-output decoupling of the torque and the amplitude of the field. The proposed approach is used to design controllers for the field amplitude and the motor torque. The method is tested both by simulation and by experiments on a motor drive. (orig.) 12 refs.

  9. Adaptive control and parameter identification of a doubly-fed induction generator for wind power

    OpenAIRE

    Orfanos-Pepainas, Stamatios

    2011-01-01

    Approved for public release; distribution is unlimited. The use of Doubly-Fed Induction Generators (DFIG) for wind energy conversion is addressed in this thesis. It is well known that when the stator is connected to the electric grid, the rotor voltage can control both mechanical torque and reactive electric power. To guarantee efficient wind energy conversion, it is important to research and design more advanced control schemes. In this thesis, we first review the basic theory behind ...

  10. Nonlinear Speed Control of Switched Reluctance Motor Drives Taking into Account Mutual Inductance

    OpenAIRE

    Alrifai, M.; Zribi, M.; Krishnan, R.; Rayan, M.

    2008-01-01

    A speed control algorithm is proposed for variable speed switched reluctance motor (SRM) drives taking into account the effects of mutual inductances. The control scheme adopts two-phase excitation; exciting two adjacent phases can overcome the problems associated with single-phase excitation such as large torque ripple, increased acoustic noise, and rotor shaft fatigues. The effects of mutual coupling between two adjacent phases and their contribution to the generated electromagnetic torque ...

  11. Inductive Power Transfer Systems for Bus-Stop-Powered Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Chung-Chuan Hou

    2016-06-01

    Full Text Available This study presents an inductive power transfer (IPT system for electric vehicles (EVs based on EE-shaped ferrite cores. The issues of the IPT system such as efficiency, air gap, displacement, dislocation, and motion are discussed. Furthermore, finite element analysis software is utilized to simulate the IPT system operated under large air gap conditions. Simulation and measurement results are presented to validate the performance of the proposed scheme and meet the requirements for bus-stop-powered EVs.

  12. Induction generator-induction motor wind-powered pumping system

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, M.S.; Lyra, R.O.C.; Silva, S.R. [CPDEE - UFMG, Belo Horizonte (Brazil)

    1997-12-31

    The energy storage matter plays an important role in wind-electric conversion systems for isolated applications. Having that in mind, two different approaches can be basically considered: either the immediate conversion of the generated electric energy, as in a water pumping system or electric energy storage for later use, as in a battery charging system. Due to some features such as no need of an external reactive power source and, sometimes, a gearbox, permanent-magnet synchronous generators have been broadly used in low rated power isolated systems. Despite that, system performance can be affected when the generator is feeding an inductive load (e.g., an induction motor) under variable-speed-variable-frequency operational conditions. Since there is no effective flux control, motor overload may occur at high wind speeds. Thus, good system performance can be obtained through additional control devices which may increase system cost. Although being rugged and cheap, induction machines always work as a reactive power drain; therefore, they demand an external reactive power source. Considering that, reactive static compensators appear as an attractive alternative to the cost x performance problem. In addition to that, different control strategies can be used so that system performance can be improved.

  13. Defining failed induction of labor.

    Science.gov (United States)

    Grobman, William A; Bailit, Jennifer; Lai, Yinglei; Reddy, Uma M; Wapner, Ronald J; Varner, Michael W; Thorp, John M; Leveno, Kenneth J; Caritis, Steve N; Prasad, Mona; Tita, Alan T N; Saade, George; Sorokin, Yoram; Rouse, Dwight J; Blackwell, Sean C; Tolosa, Jorge E

    2018-01-01

    While there are well-accepted standards for the diagnosis of arrested active-phase labor, the definition of a "failed" induction of labor remains less certain. One approach to diagnosing a failed induction is based on the duration of the latent phase. However, a standard for the minimum duration that the latent phase of a labor induction should continue, absent acute maternal or fetal indications for cesarean delivery, remains lacking. The objective of this study was to determine the frequency of adverse maternal and perinatal outcomes as a function of the duration of the latent phase among nulliparous women undergoing labor induction. This study is based on data from an obstetric cohort of women delivering at 25 US hospitals from 2008 through 2011. Nulliparous women who had a term singleton gestation in the cephalic presentation were eligible for this analysis if they underwent a labor induction. Consistent with prior studies, the latent phase was determined to begin once cervical ripening had ended, oxytocin was initiated, and rupture of membranes had occurred, and was determined to end once 5-cm dilation was achieved. The frequencies of cesarean delivery, as well as of adverse maternal (eg, postpartum hemorrhage, chorioamnionitis) and perinatal (eg, a composite frequency of seizures, sepsis, bone or nerve injury, encephalopathy, or death) outcomes, were compared as a function of the duration of the latent phase (analyzed with time both as a continuous measure and categorized in 3-hour increments). A total of 10,677 women were available for analysis. In the vast majority (96.4%) of women, the active phase had been reached by 15 hours. The longer the duration of a woman's latent phase, the greater her chance of ultimately undergoing a cesarean delivery (P 40% of women whose latent phase lasted ≥18 hours still had a vaginal delivery. Several maternal morbidities, such as postpartum hemorrhage (P induction will have entered the active phase by 15 hours

  14. Short-Term Saved Leave Scheme

    CERN Multimedia

    HR Department

    2007-01-01

    As announced at the meeting of the Standing Concertation Committee (SCC) on 26 June 2007 and in http://Bulletin No. 28/2007, the existing Saved Leave Scheme will be discontinued as of 31 December 2007. Staff participating in the Scheme will shortly receive a contract amendment stipulating the end of financial contributions compensated by save leave. Leave already accumulated on saved leave accounts can continue to be taken in accordance with the rules applicable to the current scheme. A new system of saved leave will enter into force on 1 January 2008 and will be the subject of a new im-plementation procedure entitled "Short-term saved leave scheme" dated 1 January 2008. At its meeting on 4 December 2007, the SCC agreed to recommend the Director-General to approve this procedure, which can be consulted on the HR Department’s website at the following address: https://cern.ch/hr-services/services-Ben/sls_shortterm.asp All staff wishing to participate in the new scheme ...

  15. Short-Term Saved Leave Scheme

    CERN Multimedia

    2007-01-01

    As announced at the meeting of the Standing Concertation Committee (SCC) on 26 June 2007 and in http://Bulletin No. 28/2007, the existing Saved Leave Scheme will be discontinued as of 31 December 2007. Staff participating in the Scheme will shortly receive a contract amendment stipulating the end of financial contributions compensated by save leave. Leave already accumulated on saved leave accounts can continue to be taken in accordance with the rules applicable to the current scheme. A new system of saved leave will enter into force on 1 January 2008 and will be the subject of a new implementation procedure entitled "Short-term saved leave scheme" dated 1 January 2008. At its meeting on 4 December 2007, the SCC agreed to recommend the Director-General to approve this procedure, which can be consulted on the HR Department’s website at the following address: https://cern.ch/hr-services/services-Ben/sls_shortterm.asp All staff wishing to participate in the new scheme a...

  16. Financial incentive schemes in primary care

    Directory of Open Access Journals (Sweden)

    Gillam S

    2015-09-01

    Full Text Available Stephen Gillam Department of Public Health and Primary Care, Institute of Public Health, University of Cambridge, Cambridge, UK Abstract: Pay-for-performance (P4P schemes have become increasingly common in primary care, and this article reviews their impact. It is based primarily on existing systematic reviews. The evidence suggests that P4P schemes can change health professionals' behavior and improve recorded disease management of those clinical processes that are incentivized. P4P may narrow inequalities in performance comparing deprived with nondeprived areas. However, such schemes have unintended consequences. Whether P4P improves the patient experience, the outcomes of care or population health is less clear. These practical uncertainties mirror the ethical concerns of many clinicians that a reductionist approach to managing markers of chronic disease runs counter to the humanitarian values of family practice. The variation in P4P schemes between countries reflects different historical and organizational contexts. With so much uncertainty regarding the effects of P4P, policy makers are well advised to proceed carefully with the implementation of such schemes until and unless clearer evidence for their cost–benefit emerges. Keywords: financial incentives, pay for performance, quality improvement, primary care

  17. Induction brazing at the Kennedy Space Center

    Science.gov (United States)

    Clautice, W. E.

    1974-01-01

    A description of the joint design, materials, equipment, qualification testing, inspection methods, and applications involved in performing induction brazing on hyperbolic propellants tubing at Kennedy Space Center. Induction brazing is a form of brazing in which the energy is transmitted to the workpiece by electrical induction; the eddy currents generated in the metal produce heat by resistance losses. Since induction heating is fast and highly localized, undesirable heat effects are minimized and the resulting braze is of high quality.

  18. Core Genome Multilocus Sequence Typing Scheme for High- Resolution Typing of Enterococcus faecium.

    Science.gov (United States)

    de Been, Mark; Pinholt, Mette; Top, Janetta; Bletz, Stefan; Mellmann, Alexander; van Schaik, Willem; Brouwer, Ellen; Rogers, Malbert; Kraat, Yvette; Bonten, Marc; Corander, Jukka; Westh, Henrik; Harmsen, Dag; Willems, Rob J L

    2015-12-01

    Enterococcus faecium, a common inhabitant of the human gut, has emerged in the last 2 decades as an important multidrug-resistant nosocomial pathogen. Since the start of the 21st century, multilocus sequence typing (MLST) has been used to study the molecular epidemiology of E. faecium. However, due to the use of a small number of genes, the resolution of MLST is limited. Whole-genome sequencing (WGS) now allows for high-resolution tracing of outbreaks, but current WGS-based approaches lack standardization, rendering them less suitable for interlaboratory prospective surveillance. To overcome this limitation, we developed a core genome MLST (cgMLST) scheme for E. faecium. cgMLST transfers genome-wide single nucleotide polymorphism(SNP) diversity into a standardized and portable allele numbering system that is far less computationally intensive than SNP-based analysis of WGS data. The E. faecium cgMLST scheme was built using 40 genome sequences that represented the diversity of the species. The scheme consists of 1,423 cgMLST target genes. To test the performance of the scheme, we performed WGS analysis of 103 outbreak isolates from five different hospitals in the Netherlands, Denmark, and Germany. The cgMLST scheme performed well in distinguishing between epidemiologically related and unrelated isolates, even between those that had the same sequence type (ST), which denotes the higher discriminatory power of this cgMLST scheme over that of conventional MLST. We also show that in terms of resolution, the performance of the E. faecium cgMLST scheme is equivalent to that of an SNP-based approach. In conclusion, the cgMLST scheme developed in this study facilitates rapid, standardized, and high-resolution tracing of E. faecium outbreaks.

  19. Pulse Mask Controlled HFAC Resonant Converter for high efficiency Industrial Induction Heating with less harmonic distortion

    Directory of Open Access Journals (Sweden)

    Nagarajan Booma

    2016-04-01

    Full Text Available This paper discusses about the fixed frequency pulse mask control based high frequency AC conversion circuit for industrial induction heating applications. Conventionally, for induction heating load, the output power control is achieved using the pulse with modulation based converters. The conventional converters do not guarantee the zero voltage switching condition required for the minimization of the switching losses. In this paper, pulse mask control scheme for the power control of induction heating load is proposed. This power control strategy allows the inverter to operate closer to the resonant frequency, to obtain zero voltage switching condition. The proposed high frequency AC power conversion circuit has lesser total harmonic distortion in the supply side. Modeling of the IH load, design of conversion circuit and principle of the control scheme and its implementation using low cost PIC controller are briefly discussed. Simulation results obtained using the Matlab environment are presented to illustrate the effectiveness of the pulse mask scheme. The obtained results indicate the reduction in losses, improvement in the output power and lesser harmonic distortion in the supply side by the proposed converter. The hardware results are in good agreement with the simulation results.

  20. An Adaptive Ship Detection Scheme for Spaceborne SAR Imagery

    Directory of Open Access Journals (Sweden)

    Xiangguang Leng

    2016-08-01

    Full Text Available With the rapid development of spaceborne synthetic aperture radar (SAR and the increasing need of ship detection, research on adaptive ship detection in spaceborne SAR imagery is of great importance. Focusing on practical problems of ship detection, this paper presents a highly adaptive ship detection scheme for spaceborne SAR imagery. It is able to process a wide range of sensors, imaging modes and resolutions. Two main stages are identified in this paper, namely: ship candidate detection and ship discrimination. Firstly, this paper proposes an adaptive land masking method using ship size and pixel size. Secondly, taking into account the imaging mode, incidence angle, and polarization channel of SAR imagery, it implements adaptive ship candidate detection in spaceborne SAR imagery by applying different strategies to different resolution SAR images. Finally, aiming at different types of typical false alarms, this paper proposes a comprehensive ship discrimination method in spaceborne SAR imagery based on confidence level and complexity analysis. Experimental results based on RADARSAT-1, RADARSAT-2, TerraSAR-X, RS-1, and RS-3 images demonstrate that the adaptive scheme proposed in this paper is able to detect ship targets in a fast, efficient and robust way.

  1. Online Monitoring of Induction Motors

    Energy Technology Data Exchange (ETDEWEB)

    McJunkin, Timothy R. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Agarwal, Vivek [Idaho National Lab. (INL), Idaho Falls, ID (United States); Lybeck, Nancy Jean [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-01-01

    The online monitoring of active components project, under the Advanced Instrumentation, Information, and Control Technologies Pathway of the Light Water Reactor Sustainability Program, researched diagnostic and prognostic models for alternating current induction motors (IM). Idaho National Laboratory (INL) worked with the Electric Power Research Institute (EPRI) to augment and revise the fault signatures previously implemented in the Asset Fault Signature Database of EPRI’s Fleet Wide Prognostic and Health Management (FW PHM) Suite software. Induction Motor diagnostic models were researched using the experimental data collected by Idaho State University. Prognostic models were explored in the set of literature and through a limited experiment with 40HP to seek the Remaining Useful Life Database of the FW PHM Suite.

  2. Device for side induction sensing

    Energy Technology Data Exchange (ETDEWEB)

    Bilibin, S.I.; Byalyy, Yu.V.; Malyshev, D.A.; Orlov, V.N.; Ovchinnikov, A.Ye.; Plyusnin, N.I.

    1982-01-01

    The device can be used to determine geophysical parameters of the beds at the zone of penetration of the drilling mud filtrate. Improvement in information content of sensing is attained by increasing the quantity of induction probes formed by the coils, and improvement in sensing accuracy by conducting measurements on one fixed part with time separation of the signals from different induction probes. The system of separation of the measurable signals is done in the form of a group of commutators and a block of cyclic control of commutation. The controlling outlets of it are connected to the controllable inlets of the commutators and the inlet of the remote measurement system for transmission of information to the surface.

  3. On generic representation of implicit induction procedures

    NARCIS (Netherlands)

    D. Naidich

    1996-01-01

    textabstractWe develop a generic representation of implicit induction proof procedures within the cover set induction framework. Our work further develops the approach of cover set induction on propositional orderings. We show that in order to represent a substantially wide range of implicit

  4. Propofol Induction's Effect on Cardiac Function

    Science.gov (United States)

    2015-03-31

    This Study Was Focused to Evaluate Feasibility of Doppler Tissue Monitoring During the Induction Anesthesia,; and Evaluate Routine Propofol Induction's Effect on Myocardial Tissue Motion, Using Non-invasive Doppler Tissue and 2D Speckle Tracking Imaging.; This is the First Study, to Our Knowledge, Which Has Evaluated the Possible Impact of Propofol Induction on LV Function.

  5. A Retrospective Appraisal of Teacher Induction

    Science.gov (United States)

    Nasser-Abu Alhija, Fadia M.; Fresko, Barbara

    2016-01-01

    Examination of an induction program for new teachers was undertaken from the viewpoint of induction graduates three years after participation. Their retrospective perspectives were investigated as to their satisfaction with assimilation in school in the induction year, their attitudes towards organizational aspects of the program, and the…

  6. Blackout cloth for dormancy induction

    Science.gov (United States)

    Tom Jopson

    2007-01-01

    The use of blackout cloth to create long night photoperiods for the induction of dormancy in certain conifer species has been an established practice for a long time. Its use was suggested by Tinus and McDonald (1979) as an effective technique, and the practice has been commonly used in Canadian forest nurseries for a number of years. Cal-Forest Nursery installed its...

  7. The law of electromagnetic induction

    Directory of Open Access Journals (Sweden)

    V.J. Kutkovetskyy

    2014-09-01

    Full Text Available Mathematical models of the electromagnetic induction law which do not take into account Faraday’s restrictions are not in full accordance with the physical phenomenon and so they are not laws. Their incomplete correspondence with real devices results in such "paradoxes" as unlimited magnetic field of unipolar generators, infinite sizes of inductors for DC and AC machines modeled, and so on.

  8. METAPHORIC MECHANISMS IN IMAGE SCHEME DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Pankratova, S.A.

    2017-06-01

    Full Text Available Problems of knowledge representation by means of images are still cognitively significant and invariably modern. The article deals with the image heuristic potential of a bookish sphere as a donor of meanings, aiding metaphoric scheme development of another modern sphere of cinematography. The key factor here is the differentiation between two basically different metaphor types – heuristic epiphora and image diaphora. The author had offered a unique methodology of counting of quantitative parameters of heuristic potential which opens the possibility of modeling the mechanisms of metaphoric meaning development. In the summary the author underscores that both ways of image scheme development are of importance to cognitive science, both heuristic epiphora and image-based diaphora play a significant role in the explication of image scheme development.

  9. IPCT: A scheme for mobile authentication

    Directory of Open Access Journals (Sweden)

    Vishnu Shankar

    2016-09-01

    Full Text Available Mobile is becoming a part of everyone's life and as their power of computation and storage is rising and cost is coming down. Most of mobile phone users have a lot of private data which they want to protect from others (La Polla et al., 2013. It means user must be authenticated properly for accessing the mobile resources. Normally user is authenticated using text passwords, PIN, face recognition or patterns etc. All these methods are used but they have some shortcomings. In this paper we have seen various existing methods of mobile authentications and proposed our improved mobile authentication IPCT scheme. We have compared our Image Pass Code with tapping scheme with existing techniques and shown that our scheme is better than existing techniques.

  10. Tradable white certificate schemes : what can we learn from tradable green certificate schemes?

    NARCIS (Netherlands)

    Oikonomou, Vlasis; Mundaca, Luis

    In this paper, we analyze the experiences gained from tradable green certificate (TGC) schemes and extract some policy lessons that can lead to a successful design of a market-based approach for energy efficiency improvement, alias tradable white certificate schemes. We use tradable green

  11. A simple angular transmit diversity scheme using a single RF frontend for PSK modulation schemes

    DEFF Research Database (Denmark)

    Alrabadi, Osama Nafeth Saleem; Papadias, Constantinos B.; Kalis, Antonis

    2009-01-01

    array (SPA) with a single transceiver, and an array area of 0.0625 square wavelengths. The scheme which requires no channel state information (CSI) at the transmitter, provides mainly a diversity gain to combat against multipath fading. The performance/capacity of the proposed diversity scheme...

  12. Two fluxes multistage induction coilgun

    Science.gov (United States)

    Gherman, L.; Pearsica, M.; Circiu, I.; Rotaru, C.

    2017-05-01

    This paper presents a brand new induction electromagnetic launcher, which uses two magnetic fluxes in order to accelerate a projectile. One magnetic flux induce a current in the armature and the second magnetic flux is creating a radial magnetic field. This aproach offer multiple advantages over single flux designs. First we are able to control the induced current in armature because we use the coil just to induce current inside the ring with a great efficiency. Second advantage is the angle of 900 between magnetic field density B and the ring. We used the induction to avoid contact between armature and accelerator. In order to create the magnetic field radial we used four coils perpendicular on armature. This approach alove us to control the phase difference between induced current in armature and current in magnetic field coils for a maximum force. The phase difference is obtained by changing the frequency of magnetic field coils power source. We used simulation software to analyze, and simulate a multistage induction coilgun design with two fluxes. The simulation results demonstrated the theoretical results.

  13. Improved FRT Control Scheme for DFIG Wind Turbine Connected to a Weak Grid

    DEFF Research Database (Denmark)

    Abulanwar, Elsayed; Chen, Zhe; Iov, Florin

    2013-01-01

    This paper presents an improved coordinated fault ridethrough (FRT) control strategy for a doubly fed induction generator (DFIG) based wind turbine, (WT), in a weak grid. A technique for grid synchronization against voltage excursions, i.e., a Dual Second Order Generalized Integrator – Frequency......), controller to counteract current ripples and tackle the DC link voltage fluctuations. Also, a reactive power support scheme to manage the DFIG reactive power during contingencies and fulfill the grid codes obligations is presented. Moreover, additional control terms are employed with the DFIG converters...

  14. Carbon trading: Current schemes and future developments

    Energy Technology Data Exchange (ETDEWEB)

    Perdan, Slobodan, E-mail: slobodan.perdan@manchester.ac.uk [School of Chemical Engineering and Analytical Science, Room F30, The Mill, University of Manchester, Sackville Street, Manchester M13 9PL (United Kingdom); Azapagic, Adisa [School of Chemical Engineering and Analytical Science, Room F30, The Mill, University of Manchester, Sackville Street, Manchester M13 9PL (United Kingdom)

    2011-10-15

    This paper looks at the greenhouse gas (GHG) emissions trading schemes and examines the prospects of carbon trading. The first part of the paper gives an overview of several mandatory GHG trading schemes around the world. The second part focuses on the future trends in carbon trading. It argues that the emergence of new schemes, a gradual enlargement of the current ones, and willingness to link existing and planned schemes seem to point towards geographical, temporal and sectoral expansion of emissions trading. However, such expansion would need to overcome some considerable technical and non-technical obstacles. Linking of the current and emerging trading schemes requires not only considerable technical fixes and harmonisation of different trading systems, but also necessitates clear regulatory and policy signals, continuing political support and a more stable economic environment. Currently, the latter factors are missing. The global economic turmoil and its repercussions for the carbon market, a lack of the international deal on climate change defining the Post-Kyoto commitments, and unfavourable policy shifts in some countries, cast serious doubts on the expansion of emissions trading and indicate that carbon trading enters an uncertain period. - Highlights: > The paper provides an extensive overview of mandatory emissions trading schemes around the world. > Geographical, temporal and sectoral expansion of emissions trading are identified as future trends. > The expansion requires considerable technical fixes and harmonisation of different trading systems. > Clear policy signals, political support and a stable economic environment are needed for the expansion. > A lack of the post-Kyoto commitments and unfavourable policy shifts indicate an uncertain future for carbon trading.

  15. The Preliminary Research for Implementation of Improved DTC Scheme of High Performance PMSM Drives

    Directory of Open Access Journals (Sweden)

    Tole Sutikno

    2008-12-01

    Full Text Available The direct torque control (DTC is one of control approache that is used commonly in PMSM control system. This method supports a very quick and precise torque response. However, the DTC method is not perfect and has some disadvantages. Many researchers have been proposed to modify the basic DTC scheme for PMSM drive. All this contributions allow performance to be improved, but at the same time they lead to more complex schemes. Furthermore, the PMSM drive control systems are usually based on microcontroller and DSP. Some researchers also have been used DSP and FPGA together to develop DTC for AC drives. These allow improving the performance, but they will increase cost. For the reason above, this paper proposed a new DTC scheme to apply only based on FPGA. The preliminary research showed that the proposed DTC sheme can reduce torque and flux ripples significantly. Therefore, this paper also recomend to realize proposed DTC scheme based on FPGA in order to support to execute very fast computation.The implementation is hoped that it will very potential to replace not only the induction motor but also the DC servo motor in a number of industrial process, commercial, domestic and modern military applications of high-performance drive.

  16. Hierarchical Control Scheme for Improving Transient Voltage Recovery of a DFIG-Based WPP

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jinho; Muljadi, Eduard; Kang, Yong Cheol

    2015-06-05

    Modern grid codes require that wind power plants (WPPs) inject reactive power according to the voltage dip at a point of interconnection (POI). This requirement helps to support a POI voltage during a fault. However, if a fault is cleared, the POI and wind turbine generator (WTG) voltages are likely to exceed acceptable levels unless the WPP reduces the injected reactive power quickly. This might deteriorate the stability of a grid by allowing the disconnection of WTGs to avoid any damage. This paper proposes a hierarchical control scheme of a doubly-fed induction generator (DFIG)-based WPP. The proposed scheme aims to improve the reactive power injecting capability during the fault and suppress the overvoltage after the fault clearance. To achieve the former, an adaptive reactive power-to-voltage scheme is implemented in each DFIG controller so that a DFIG with a larger reactive power capability will inject more reactive power. To achieve the latter, a washout filter is used to capture a high frequency component contained in the WPP voltage, which is used to remove the accumulated values in the proportional-integral controllers. Test results indicate that the scheme successfully supports the grid voltage during the fault, and recovers WPP voltages without exceeding the limit after the fault clearance.

  17. Quality Teacher Induction: "Fourth-Wave" (1997-2006) Induction Programs

    Science.gov (United States)

    Wood, Ann L.; Stanulis, Randi Nevins

    2009-01-01

    The purpose of this essay is to describe quality teacher induction that has evolved from "fourth-wave" (1997-2006) teacher induction program development and research. A definition of quality induction is proposed, and a set of induction goals and components are outlined. Understandings gained from fourth-wave programs are described, including ways…

  18. An Exponential Regulator for Rapidity Divergences

    Energy Technology Data Exchange (ETDEWEB)

    Li, Ye [Fermilab; Neill, Duff [MIT, Cambridge, CTP; Zhu, Hua Xing [MIT, Cambridge, CTP

    2016-04-01

    Finding an efficient and compelling regularization of soft and collinear degrees of freedom at the same invariant mass scale, but separated in rapidity is a persistent problem in high-energy factorization. In the course of a calculation, one encounters divergences unregulated by dimensional regularization, often called rapidity divergences. Once regulated, a general framework exists for their renormalization, the rapidity renormalization group (RRG), leading to fully resummed calculations of transverse momentum (to the jet axis) sensitive quantities. We examine how this regularization can be implemented via a multi-differential factorization of the soft-collinear phase-space, leading to an (in principle) alternative non-perturbative regularization of rapidity divergences. As an example, we examine the fully-differential factorization of a color singlet's momentum spectrum in a hadron-hadron collision at threshold. We show how this factorization acts as a mother theory to both traditional threshold and transverse momentum resummation, recovering the classical results for both resummations. Examining the refactorization of the transverse momentum beam functions in the threshold region, we show that one can directly calculate the rapidity renormalized function, while shedding light on the structure of joint resummation. Finally, we show how using modern bootstrap techniques, the transverse momentum spectrum is determined by an expansion about the threshold factorization, leading to a viable higher loop scheme for calculating the relevant anomalous dimensions for the transverse momentum spectrum.

  19. Clocking Scheme for Switched-Capacitor Circuits

    DEFF Research Database (Denmark)

    Steensgaard-Madsen, Jesper

    1998-01-01

    A novel clocking scheme for switched-capacitor (SC) circuits is presented. It can enhance the understanding of SC circuits and the errors caused by MOSFET (MOS) switches. Charge errors, and techniques to make SC circuits less sensitive to them are discussed.......A novel clocking scheme for switched-capacitor (SC) circuits is presented. It can enhance the understanding of SC circuits and the errors caused by MOSFET (MOS) switches. Charge errors, and techniques to make SC circuits less sensitive to them are discussed....

  20. An Elaborate Secure Quantum Voting Scheme

    Science.gov (United States)

    Zhang, Jia-Lei; Xie, Shu-Cui; Zhang, Jian-Zhong

    2017-10-01

    An elaborate secure quantum voting scheme is presented in this paper. It is based on quantum proxy blind signature. The eligible voter's voting information can be transmitted to the tallyman Bob with the help of the scrutineer Charlie. Charlie's supervision in the whole voting process can make the protocol satisfy fairness and un-repeatability so as to avoid Bob's dishonest behaviour. Our scheme uses the physical characteristics of quantum mechanics to achieve voting, counting and immediate supervision. In addition, the program also uses quantum key distribution protocol and quantum one-time pad to guarantee its unconditional security.

  1. A COMPLETE SCHEME FOR A MUON COLLIDER.

    Energy Technology Data Exchange (ETDEWEB)

    PALMER,R.B.; BERG, J.S.; FERNOW, R.C.; GALLARDO, J.C.; KIRK, H.G.; ALEXAHIN, Y.; NEUFFER, D.; KAHN, S.A.; SUMMERS, D.

    2007-09-01

    A complete scheme for production, cooling, acceleration, and ring for a 1.5 TeV center of mass muon collider is presented, together with parameters for two higher energy machines. The schemes starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Six dimensional cooling in long-period helical lattices reduces the longitudinal emittance until it becomes possible to merge the trains into single bunches, one of each sign. Further cooling in all dimensions is applied to the single bunches in further helical lattices. Final transverse cooling to the required parameters is achieved in 50 T solenoids.

  2. Autonomous droop scheme with reduced generation cost

    DEFF Research Database (Denmark)

    Nutkani, Inam Ullah; Loh, Poh Chiang; Blaabjerg, Frede

    2013-01-01

    Droop scheme has been widely applied to the control of Distributed Generators (DGs) in microgrids for proportional power sharing based on their ratings. For standalone microgrid, where centralized management system is not viable, the proportional power sharing based droop might not suit well since...... DGs are usually of different types unlike synchronous generators. This paper presents an autonomous droop scheme that takes into consideration the operating cost, efficiency and emission penalty of each DG since all these factors directly or indirectly contributes to the Total Generation Cost (TGC...

  3. Security problem on arbitrated quantum signature schemes

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Jeong Woon [Emerging Technology R and D Center, SK Telecom, Kyunggi 463-784 (Korea, Republic of); Chang, Ku-Young; Hong, Dowon [Cryptography Research Team, Electronics and Telecommunications Research Institute, Daejeon 305-700 (Korea, Republic of)

    2011-12-15

    Many arbitrated quantum signature schemes implemented with the help of a trusted third party have been developed up to now. In order to guarantee unconditional security, most of them take advantage of the optimal quantum one-time encryption based on Pauli operators. However, in this paper we point out that the previous schemes provide security only against a total break attack and show in fact that there exists an existential forgery attack that can validly modify the transmitted pair of message and signature. In addition, we also provide a simple method to recover security against the proposed attack.

  4. Droop Scheme With Consideration of Operating Costs

    DEFF Research Database (Denmark)

    Nutkani, I. U.; Loh, Poh Chiang; Blaabjerg, Frede

    2014-01-01

    considered even though they are different for different types of DGs. This letter thus proposes an alternative droop scheme, which can better distinguish the different operating characteristics and objectives of the DGs grouped together in a weighted droop expression. The power sharing arrived in the steady......Although many droop schemes have been proposed for distributed generator (DG) control in a microgrid, they mainly focus on achieving proportional power sharing based on the DG kVA ratings. Other factors like generation costs, efficiencies, and emission penalties at different loads have not been...

  5. Phase Method of Invariant Measurement of Active-Inductive Measuring Two-Pole Parameters

    Directory of Open Access Journals (Sweden)

    Boris MAMIKONYAN

    2017-04-01

    Full Text Available There has been given the solution of the technical problem of separate measurement of parameters of inductance coils and inductive primary converters on alternating current without application of potential-current signals. As a measuring circuit the scheme of voltage divider with active-inductive two-pole is used, and as an output signal there has been used the angle of phase shift between two output voltages of the measuring circuit. For forming the output signal temporal separation of measurement channel is used. The advantages of phase method are mostly due to capacity of using microcontrollers. In the technical solutions under consideration the microcontroller regulates the measuring process and develops the measurement results.

  6. Assessing the Tangent Linear Behaviour of Common Tracer Transport Schemes and Their Use in a Linearised Atmospheric General Circulation Model

    Science.gov (United States)

    Holdaway, Daniel; Kent, James

    2015-01-01

    The linearity of a selection of common advection schemes is tested and examined with a view to their use in the tangent linear and adjoint versions of an atmospheric general circulation model. The schemes are tested within a simple offline one-dimensional periodic domain as well as using a simplified and complete configuration of the linearised version of NASA's Goddard Earth Observing System version 5 (GEOS-5). All schemes which prevent the development of negative values and preserve the shape of the solution are confirmed to have nonlinear behaviour. The piecewise parabolic method (PPM) with certain flux limiters, including that used by default in GEOS-5, is found to support linear growth near the shocks. This property can cause the rapid development of unrealistically large perturbations within the tangent linear and adjoint models. It is shown that these schemes with flux limiters should not be used within the linearised version of a transport scheme. The results from tests using GEOS-5 show that the current default scheme (a version of PPM) is not suitable for the tangent linear and adjoint model, and that using a linear third-order scheme for the linearised model produces better behaviour. Using the third-order scheme for the linearised model improves the correlations between the linear and non-linear perturbation trajectories for cloud liquid water and cloud liquid ice in GEOS-5.

  7. Rapid Prototyping Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The ARDEC Rapid Prototyping (RP) Laboratory was established in December 1992 to provide low cost RP capabilities to the ARDEC engineering community. The Stratasys,...

  8. Sensorless FOC Performance Improved with On-Line Speed and Rotor Resistance Estimator Based on an Artificial Neural Network for an Induction Motor Drive.

    Science.gov (United States)

    Gutierrez-Villalobos, Jose M; Rodriguez-Resendiz, Juvenal; Rivas-Araiza, Edgar A; Martínez-Hernández, Moisés A

    2015-06-29

    Three-phase induction motor drive requires high accuracy in high performance processes in industrial applications. Field oriented control, which is one of the most employed control schemes for induction motors, bases its function on the electrical parameter estimation coming from the motor. These parameters make an electrical machine driver work improperly, since these electrical parameter values change at low speeds, temperature changes, and especially with load and duty changes. The focus of this paper is the real-time and on-line electrical parameters with a CMAC-ADALINE block added in the standard FOC scheme to improve the IM driver performance and endure the driver and the induction motor lifetime. Two kinds of neural network structures are used; one to estimate rotor speed and the other one to estimate rotor resistance of an induction motor.

  9. Sensorless FOC Performance Improved with On-Line Speed and Rotor Resistance Estimator Based on an Artificial Neural Network for an Induction Motor Drive

    Directory of Open Access Journals (Sweden)

    Jose. M. Gutierrez-Villalobos

    2015-06-01

    Full Text Available Three-phase induction motor drive requires high accuracy in high performance processes in industrial applications. Field oriented control, which is one of the most employed control schemes for induction motors, bases its function on the electrical parameter estimation coming from the motor. These parameters make an electrical machine driver work improperly, since these electrical parameter values change at low speeds, temperature changes, and especially with load and duty changes. The focus of this paper is the real-time and on-line electrical parameters with a CMAC-ADALINE block added in the standard FOC scheme to improve the IM driver performance and endure the driver and the induction motor lifetime. Two kinds of neural network structures are used; one to estimate rotor speed and the other one to estimate rotor resistance of an induction motor.

  10. Bias Reversal Technique in SQUID Bootstrap Circuit (SBC) Scheme

    Science.gov (United States)

    Rong, Liangliang; Zhang, Yi; Zhang, Guofeng; Wu, Jun; Dong, Hui; Qiu, Longqing; Xie, Xiaoming; Offenhüusser, Andreas

    Recently, a SQUID direct readout scheme called voltage-biased SQUID Bootstrap Circuit (SBC) is introduced to reduce preamplifier noise contribution. In this paper, we describe a concept of SBC with bias reversal technique which can suppress SQUID intrinsic 1/f noise. When applying a symmetrically rectangular voltage across SBC, two I-Φ characteristics appear at the amplifier output. In order to return to one I - Φ curve, a demodulation technique is required. Because of the asymmetry of typical SBC I-Φ curve, the demodulation method is realized by using a flux compensation of one half Φ0 flux shift. The output signal is then filtered and returned to one I-Φ curve for ordinary FLL readout. It was found, the reversal frequency fR can be dramatically enhanced when using a preamplifier consisting of two operational amplifiers. A planar Nb SQUID magnetometer with a loop-inductance of 350 pH, fR =50 kHz and a second order low pass filter with 10 kHz cut off frequency was employed in our experiment. Results prove the feasibility of SBC bias reversal method. Comparative experiment on noise performance will be carried out in further studies.

  11. A survey of Strong Convergent Schemes for the Simulation of ...

    African Journals Online (AJOL)

    PROF. OLIVER OSUAGWA

    2014-12-01

    Dec 1, 2014 ... Abstract. We considered strong convergent stochastic schemes for the simulation of stochastic differential equations. The stochastic Taylor's expansion, which is the main tool used for the derivation of strong convergent schemes; the Euler Maruyama, Milstein scheme, stochastic multistep schemes, Implicit ...

  12. Plutonium age dating (production date measurement) by inductively coupled plasma mass spectrometry

    OpenAIRE

    Varga, Zsolt; Nicholl, Adrian; Wallenius, Maria; Mayer, Klaus

    2015-01-01

    This paper describes rapid methods for the determination of the production date (age dating) of plutonium (Pu) materials by inductively coupled plasma mass spectrometry (ICP-MS) for nuclear forensic and safeguards purposes. One of the presented methods is a rapid, direct measurement without chemical separation using 235U/239Pu and 236U/240Pu chronometers. The other method comprises a straightforward extraction chromatographic separation, followed by ICP-MS measurement for the 234U/238Pu, 235U...

  13. An Enhanced LVRT Scheme for DFIG-based WECSs under Both Balanced and Unbalanced Grid Voltage Sags

    DEFF Research Database (Denmark)

    Mohammadi, Jafar; Afsharnia, Saeed; Ebrahimzadeh, Esmaeil

    2017-01-01

    Due to the latest grid codes, wind energy conversion systems (WECSs) are required to remain connected to grid under grid voltage sags and supply reactive power into the grid. So, this paper proposes an enhanced scheme to improve low-voltage ride through (LVRT) capability of doubly fed induction...... generator (DFIG)-based WECSs under both balanced and unbalanced grid voltage sags. The proposed scheme is composed of active and passive LVRT compensators. The active compensator is performed by controlling the rotor- and grid-side converters of the DFIG to decrease the stator flux oscillations and inject...... reactive power into the grid. The passive compensator is based on a three-phase stator damping resistor (SDR) located in series with the stator windings. The proposed scheme decreases the negative effects of grid voltage sags in the DFIG system including the rotor over-currents, electromagnetic torque...

  14. Creating Culturally Sustainable Agri-Environmental Schemes

    Science.gov (United States)

    Burton, Rob J. F.; Paragahawewa, Upananda Herath

    2011-01-01

    Evidence is emerging from across Europe that contemporary agri-environmental schemes are having only limited, if any, influence on farmers' long-term attitudes towards the environment. In this theoretical paper we argue that these approaches are not "culturally sustainable," i.e. the actions are not becoming embedded within farming…

  15. Pay-what-you-want pricing schemes

    DEFF Research Database (Denmark)

    Kahsay, Goytom Abraha; Samahita, Margaret

    Pay-What-You-Want (PWYW) pricing schemes are becoming increasingly popular in a wide range of industries. We develop a model incorporating self-image into the buyer's utility function and introduce heterogeneity in consumption utility and image-sensitivity, which generates different purchase...

  16. Enhancing Cooperative Loan Scheme Through Automated Loan ...

    African Journals Online (AJOL)

    Enhancing Cooperative Loan Scheme Through Automated Loan Management System. ... Financial transactions through manual system of operation are prone to errors and unimagined complexities, making it so difficult a task maintaining all entries of users account, search records of activities, handle loan deduction errors ...

  17. Geometrical and frequential watermarking scheme using similarities

    Science.gov (United States)

    Bas, Patrick; Chassery, Jean-Marc; Davoine, Franck

    1999-04-01

    Watermarking schemes are more and more robust to classical degradations. The NEC system developed by Cox, using both original and marked images, can detect the mark with a JPEG compression ratio of 30. Nevertheless a very simple geometric attack done by the program Stirmark can remove the watermark. Most of the present watermarking schemes only map a mark on the image without geometric reference and therefore are not robust to geometric transformation. We present a scheme based on the modification of a collage map (issued from a fractal code used in fractal compression). We add a mark introducing similarities in the image. The embedding of the mark is done by selection of points of interest supporting blocks on which similarities are hided. This selection is done by the Stephens-Harris detector. The similarity is embedded locally to be robust to cropping. Contrary to many schemes, the reference mark used for the detection comes from the marked image and thus undergoes geometrical distortions. The detection of the mark is done by searching interest blocks and their similarities. It does not use the original image and the robustness is guaranteed by a key. Our first results show that the similarities-based watermarking is quite robust to geometric transformation such as translations, rotations and cropping.

  18. The Partners in Flight species prioritization scheme

    Science.gov (United States)

    William C. Hunter; Michael F. Carter; David N. Pashley; Keith Barker

    1993-01-01

    The prioritization scheme identifies those birds at any locality on several geographic scales most in need of conservation action. Further, it suggests some of those actions that ought to be taken. Ranking criteria used to set priorities for Neotropical migratory landbirds measure characteristics of species that make them vulnerable to local and global extinction....

  19. Shanghai : Developing a Green Electricity Scheme

    OpenAIRE

    Heijndermans, Enno; Berrah, Noureddine; Crowdis, Mark D.

    2006-01-01

    This report documents the experience of developing a green electricity scheme in Shanghai, China. It is intended to be a resource when replicating this effort in another city or country. The study consists of two parts. In Part 1, the general characteristics of both the framework for green electricity products and the market for green electricity products are presented. It also presents a ...

  20. EXPERIMENTAL EVALUATION OF LIDAR DATA VISUALIZATION SCHEMES

    Directory of Open Access Journals (Sweden)

    S. Ghosh

    2012-07-01

    Full Text Available LiDAR (Light Detection and Ranging has attained the status of an industry standard method of data collection for gathering three dimensional topographic information. Datasets captured through LiDAR are dense, redundant and are perceivable from multiple directions, which is unlike other geospatial datasets collected through conventional methods. This three dimensional information has triggered an interest in the scientific community to develop methods for visualizing LiDAR datasets and value added products. Elementary schemes of visualization use point clouds with intensity or colour, triangulation and tetrahedralization based terrain models draped with texture. Newer methods use feature extraction either through the process of classification or segmentation. In this paper, the authors have conducted a visualization experience survey where 60 participants respond to a questionnaire. The questionnaire poses six different questions on the qualities of feature perception and depth for 12 visualization schemes. The answers to these questions are obtained on a scale of 1 to 10. Results are thus presented using the non-parametric Friedman's test, using post-hoc analysis for hypothetically ranking the visualization schemes based on the rating received and finally confirming the rankings through the Page's trend test. Results show that a heuristic based visualization scheme, which has been developed by Ghosh and Lohani (2011 performs the best in terms of feature and depth perception.

  1. The data cyclotron query processing scheme

    NARCIS (Netherlands)

    R.A. Goncalves (Romulo); M.L. Kersten (Martin)

    2010-01-01

    htmlabstractDistributed database systems exploit static workload characteristics to steer data fragmentation and data allocation schemes. However, the grand challenge of distributed query processing is to come up with a self-organizing architecture, which exploits all resources to manage the hot

  2. Value constraints in the CLP scheme

    NARCIS (Netherlands)

    M.H. van Emden

    1996-01-01

    textabstractThis paper addresses the question of how to incorporate constraint propagation into logic programming. A likely candidate is the CLP scheme, which allows one to exploit algorithmic opportunities while staying within logic programming semantics. CLP($cal R$) is an example: it combines

  3. Benefit Reentitlement Conditions in Unemployment Insurance Schemes

    DEFF Research Database (Denmark)

    Andersen, Torben M.; Christoffersen, Mark Strøm; Svarer, Michael

    Unemployment insurance schemes include conditions on past employment history as part of the eligibility conditions. This aspect is often neglected in the literature which primarily focuses on benefit levels and benefit duration. In a search-matching framework we show that benefit duration and emp...

  4. External quality assessment schemes for toxicology.

    Science.gov (United States)

    Wilson, John

    2002-08-14

    A variety of external quality assurance (EQA) schemes monitor quantitative performance for routine biochemical analysis of agents such as paracetamol, salicylate, ethanol and carboxyhaemoglobin. Their usefulness for toxicologists can be lessened where the concentrations monitored do not extend fully into the toxic range or where the matrix is synthetic, of animal origin or serum as opposed to whole human blood. A scheme for quantitative determinations of a wider range of toxicological analytes such as opioids, benzodiazepines and tricyclics in human blood has been piloted by the United Kingdom National External Quality Assessment Scheme (UKNEQAS). Specialist schemes are available for drugs of abuse testing in urine and for hair analysis. Whilst these programmes provide much useful information on the performance of analytical techniques, they fail to monitor the integrated processes that are needed in investigation of toxicological cases. In practice, both qualitative and quantitative tests are used in combination with case information to guide the evaluation of the samples and to develop an interpretation of the analytical findings that is used to provide clinical or forensic advice. EQA programs that combine the analytical and interpretative aspects of case studies are available from EQA providers such as UKNEQAS and the Dutch KKGT program (Stichting Kwaliteitsbewaking Klinische Geneesmiddelanalyse en Toxicologie).

  5. Labeling schemes for bounded degree graphs

    DEFF Research Database (Denmark)

    Adjiashvili, David; Rotbart, Noy Galil

    2014-01-01

    graphs. Our results complement a similar bound recently obtained for bounded depth trees [Fraigniaud and Korman, SODA 2010], and may provide new insights for closing the long standing gap for adjacency in trees [Alstrup and Rauhe, FOCS 2002]. We also provide improved labeling schemes for bounded degree...

  6. Voluntary Certification Schemes and Legal Minimum Standards

    NARCIS (Netherlands)

    Herzfeld, T.; Jongeneel, R.A.

    2012-01-01

    EU farmers face increasing requests to comply with legal as well as private agribusiness and retail standards. Both requests potentially raise farmer’s administrative burden. This paper discusses the potential synergies between cross-compliance and third-party certification schemes. In selected

  7. Traffic calming schemes : opportunities and implementation strategies.

    NARCIS (Netherlands)

    Schagen, I.N.L.G. van (ed.)

    2003-01-01

    Commissioned by the Swedish National Road Authority, this report aims to provide a concise overview of knowledge of and experiences with traffic calming schemes in urban areas, both on a technical level and on a policy level. Traffic calming refers to a combination of network planning and

  8. A Presuppositional Approach to Conceptual Schemes | Wang ...

    African Journals Online (AJOL)

    ; for they have been focused too much on the truth-conditional notions of meaning/concepts and translation/interpretation in Tarski's style. It is exactly due to such a Quinean interpretation of the notion of conceptual schemes that the very notion ...

  9. Observations and comments on the classification schemes ...

    African Journals Online (AJOL)

    Reviews of the classification schemes proposed by various geologists are basically similar. However, general discrepancies, inconsistencies and contradictions in the stratigraphic positions of some of the rock units have been observed, as well as terminologies to describe rock units which are inconsistent with stratigraphic ...

  10. Digitally-Controlled Optimal Position Servo Of Induction Motors

    Science.gov (United States)

    Haneda, H.; Nagao, A.

    1987-10-01

    The purpose of the paper is to propose a new high-performance optimal position servo of an induction motor fully controlled by a micro-computer, which was designed and realized through a waterfall type top-down design in a newly developed CAD environment. Field-orientation control was used to design a new voltage-controlled optimal regulator for position control. Globally stable observers were designed and utilized to overcome the restricted availability of sensed variables: winding voltages & currents and shaft speed & angle. The digital scheme was experimentally tested and verified. Also shown is the effect of quantization errors and sampling period in A/D's & D/A's on the response and accuracy of the control system.

  11. Simple Approach For Induction Motor Control Using Reconfigurable Hardware

    Directory of Open Access Journals (Sweden)

    József VÁSÁRHELYI

    2002-12-01

    Full Text Available The paper deals with rotor-field-oriented vector control structures for the induction motor drives fed by the so-called tandem frequency converter. It is composed of two different types of DC-link converters connected in parallel arrangement. The larger-power one has current-source character and is operating synchronized in time and in amplitude with the stator currents. The other one has voltage-source character and it is the actuator of the motor control system. The drive is able to run also with partial-failed tandem converter, if the control strategy corresponds to the actual operating mode. A reconfigurable hardware implemented in configurable logic cells ensures the changing of the vector-control structure. The proposed control schemes were tested by simulation based on Matlab-Simulink model.

  12. Rapid typing of Coxiella burnetii.

    Directory of Open Access Journals (Sweden)

    Heidie M Hornstra

    Full Text Available Coxiella burnetii has the potential to cause serious disease and is highly prevalent in the environment. Despite this, epidemiological data are sparse and isolate collections are typically small, rare, and difficult to share among laboratories as this pathogen is governed by select agent rules and fastidious to culture. With the advent of whole genome sequencing, some of this knowledge gap has been overcome by the development of genotyping schemes, however many of these methods are cumbersome and not readily transferable between institutions. As comparisons of the few existing collections can dramatically increase our knowledge of the evolution and phylogeography of the species, we aimed to facilitate such comparisons by extracting SNP signatures from past genotyping efforts and then incorporated these signatures into assays that quickly and easily define genotypes and phylogenetic groups. We found 91 polymorphisms (SNPs and indels among multispacer sequence typing (MST loci and designed 14 SNP-based assays that could be used to type samples based on previously established phylogenetic groups. These assays are rapid, inexpensive, real-time PCR assays whose results are unambiguous. Data from these assays allowed us to assign 43 previously untyped isolates to established genotypes and genomic groups. Furthermore, genotyping results based on assays from the signatures provided here are easily transferred between institutions, readily interpreted phylogenetically and simple to adapt to new genotyping technologies.

  13. Energy decomposition scheme based on the generalized Kohn-Sham scheme.

    Science.gov (United States)

    Su, Peifeng; Jiang, Zhen; Chen, Zuochang; Wu, Wei

    2014-04-03

    In this paper, a new energy decomposition analysis scheme based on the generalized Kohn-Sham (GKS) and the localized molecular orbital energy decomposition analysis (LMO-EDA) scheme, named GKS-EDA, is proposed. The GKS-EDA scheme has a wide range of DFT functional adaptability compared to LMO-EDA. In the GKS-EDA scheme, the exchange, repulsion, and polarization terms are determined by DFT orbitals; the correlation term is defined as the difference of the GKS correlation energy from monomers to supermolecule. Using the new definition, the GKS-EDA scheme avoids the error of LMO-EDA which comes from the separated treatment of EX and EC functionals. The scheme can perform analysis both in the gas and in the condensed phases with most of the popular DFT functionals, including LDA, GGA, meta-GGA, hybrid GGA/meta-GGA, double hybrid, range-separated (long-range correction), and dispersion correction. By the GKS-EDA scheme, the DFT functionals assessment for hydrogen bonding, vdW interaction, symmetric radical cation, charge-transfer, and metal-ligand interaction is performed.

  14. LevelScheme: A level scheme drawing and scientific figure preparation system for Mathematica

    Science.gov (United States)

    Caprio, M. A.

    2005-09-01

    LevelScheme is a scientific figure preparation system for Mathematica. The main emphasis is upon the construction of level schemes, or level energy diagrams, as used in nuclear, atomic, molecular, and hadronic physics. LevelScheme also provides a general infrastructure for the preparation of publication-quality figures, including support for multipanel and inset plotting, customizable tick mark generation, and various drawing and labeling tasks. Coupled with Mathematica's plotting functions and powerful programming language, LevelScheme provides a flexible system for the creation of figures combining diagrams, mathematical plots, and data plots. Program summaryTitle of program:LevelScheme Catalogue identifier:ADVZ Program obtainable from: CPC Program Library, Queen's University of Belfast, N. Ireland Program summary URL:http://cpc.cs.qub.ac.uk/summaries/ADVZ Operating systems:Any which supports Mathematica; tested under Microsoft Windows XP, Macintosh OS X, and Linux Programming language used:Mathematica 4 Number of bytes in distributed program, including test and documentation:3 051 807 Distribution format:tar.gz Nature of problem:Creation of level scheme diagrams. Creation of publication-quality multipart figures incorporating diagrams and plots. Method of solution:A set of Mathematica packages has been developed, providing a library of level scheme drawing objects, tools for figure construction and labeling, and control code for producing the graphics.

  15. HYBRID SYSTEM BASED FUZZY-PID CONTROL SCHEMES FOR UNPREDICTABLE PROCESS

    Directory of Open Access Journals (Sweden)

    M.K. Tan

    2011-07-01

    Full Text Available In general, the primary aim of polymerization industry is to enhance the process operation in order to obtain high quality and purity product. However, a sudden and large amount of heat will be released rapidly during the mixing process of two reactants, i.e. phenol and formalin due to its exothermic behavior. The unpredictable heat will cause deviation of process temperature and hence affect the quality of the product. Therefore, it is vital to control the process temperature during the polymerization. In the modern industry, fuzzy logic is commonly used to auto-tune PID controller to control the process temperature. However, this method needs an experienced operator to fine tune the fuzzy membership function and universe of discourse via trial and error approach. Hence, the setting of fuzzy inference system might not be accurate due to the human errors. Besides that, control of the process can be challenging due to the rapid changes in the plant parameters which will increase the process complexity. This paper proposes an optimization scheme using hybrid of Q-learning (QL and genetic algorithm (GA to optimize the fuzzy membership function in order to allow the conventional fuzzy-PID controller to control the process temperature more effectively. The performances of the proposed optimization scheme are compared with the existing fuzzy-PID scheme. The results show that the proposed optimization scheme is able to control the process temperature more effectively even if disturbance is introduced.

  16. Electricity storage using a thermal storage scheme

    Science.gov (United States)

    White, Alexander

    2015-01-01

    The increasing use of renewable energy technologies for electricity generation, many of which have an unpredictably intermittent nature, will inevitably lead to a greater demand for large-scale electricity storage schemes. For example, the expanding fraction of electricity produced by wind turbines will require either backup or storage capacity to cover extended periods of wind lull. This paper describes a recently proposed storage scheme, referred to here as Pumped Thermal Storage (PTS), and which is based on "sensible heat" storage in large thermal reservoirs. During the charging phase, the system effectively operates as a high temperature-ratio heat pump, extracting heat from a cold reservoir and delivering heat to a hot one. In the discharge phase the processes are reversed and it operates as a heat engine. The round-trip efficiency is limited only by process irreversibilities (as opposed to Second Law limitations on the coefficient of performance and the thermal efficiency of the heat pump and heat engine respectively). PTS is currently being developed in both France and England. In both cases, the schemes operate on the Joule-Brayton (gas turbine) cycle, using argon as the working fluid. However, the French scheme proposes the use of turbomachinery for compression and expansion, whereas for that being developed in England reciprocating devices are proposed. The current paper focuses on the impact of the various process irreversibilities on the thermodynamic round-trip efficiency of the scheme. Consideration is given to compression and expansion losses and pressure losses (in pipe-work, valves and thermal reservoirs); heat transfer related irreversibility in the thermal reservoirs is discussed but not included in the analysis. Results are presented demonstrating how the various loss parameters and operating conditions influence the overall performance.

  17. Induction of D-aldohexoside:cytochrome c oxidoreductase in Agrobacterium tumefaciens.

    Science.gov (United States)

    Nakamura, L K; Tyler, D D

    1977-02-01

    D-Aldohexopyranoside:cytochrome c oxidoreductase (ACO) was strongly induced by cellobiose, alpha-methylglucoside, beta-methylglucoside, kojibiose, and sophorose. Induction was rapid, and ACO was readily detectable within 10 min after addition of cellobiose as inducer. Although not measurable for 30 to 40 min after addition of inducer, once started, the rate of induction with alpha-methylglucoside equaled or even exceeded that obtained with cellobiose. Induction by sucrose, maltose, alpha-alpha-trehalose, melibiose, and lactose was weak. In general, the active ACO inducers were poor glycosidase inducers; the converse also appeared to be true. Although ACO induction was not repressed by D-glucose, it was repressed by succinate, malate, and fumarate.

  18. Mathematical model of induction heating

    Science.gov (United States)

    Rak, Josef

    2017-07-01

    One of mathematical models of induction heating can be described by a parabolic differential equation with the specific Joule looses in the body. Advantage of this method is that the detailed knowledge of the 3D-magnetic field is not necessary and move of the body or the inductor can be easily implemented. The specific Joule looses can computed by solving the Fredholm integral equation of the second kind for the eddy current of density by the Nyström method with the singularity subtraction.

  19. An Induction Linac Test Stand

    CERN Document Server

    De Hope, William; Kihara, Ron; Ong, Mike; Vogtlin, George; Zentler, Jan-Mark

    2005-01-01

    A single-cell test stand has been constructed to facilitate study and guide improvements of the induction electron linac at the FXR radiographic facility at LLNL.* This paper will discuss how modifications in pulse compression and shaping, pulse power transmission, initial ferrite state, and accelerator cell loading have been performed on the test stand and can be applied to the entire accelerator. Some of the specialized diagnostics being used will be described. Finally, the paper will discuss how computer modeling and judicious timing control can be used to optimize accelerator performance by making only selective changes that can be accomplished at minimal cost.

  20. Elementary induction on abstract structures

    CERN Document Server

    Moschovakis, Yiannis N

    2008-01-01

    Hailed by the Bulletin of the American Mathematical Society as ""easy to use and a pleasure to read,"" this research monograph is recommended for students and professionals interested in model theory and definability theory. The sole prerequisite is a familiarity with the basics of logic, model theory, and set theory.The author, Professor of Mathematics at UCLA and Emeritus Professor of Mathematics,University of Athens, Greece, begins with a focus on the theory of inductive and hyperelementary sets. Subsequent chapters advance to acceptable structures and countable acceptable structures, concl

  1. A Rhythm-Based Authentication Scheme for Smart Media Devices

    Directory of Open Access Journals (Sweden)

    Jae Dong Lee

    2014-01-01

    Full Text Available In recent years, ubiquitous computing has been rapidly emerged in our lives and extensive studies have been conducted in a variety of areas related to smart devices, such as tablets, smartphones, smart TVs, smart refrigerators, and smart media devices, as a measure for realizing the ubiquitous computing. In particular, smartphones have significantly evolved from the traditional feature phones. Increasingly higher-end smartphone models that can perform a range of functions are now available. Smart devices have become widely popular since they provide high efficiency and great convenience for not only private daily activities but also business endeavors. Rapid advancements have been achieved in smart device technologies to improve the end users’ convenience. Consequently, many people increasingly rely on smart devices to store their valuable and important data. With this increasing dependence, an important aspect that must be addressed is security issues. Leaking of private information or sensitive business data due to loss or theft of smart devices could result in exorbitant damage. To mitigate these security threats, basic embedded locking features are provided in smart devices. However, these locking features are vulnerable. In this paper, an original security-locking scheme using a rhythm-based locking system (RLS is proposed to overcome the existing security problems of smart devices. RLS is a user-authenticated system that addresses vulnerability issues in the existing locking features and provides secure confidentiality in addition to convenience.

  2. A rhythm-based authentication scheme for smart media devices.

    Science.gov (United States)

    Lee, Jae Dong; Jeong, Young-Sik; Park, Jong Hyuk

    2014-01-01

    In recent years, ubiquitous computing has been rapidly emerged in our lives and extensive studies have been conducted in a variety of areas related to smart devices, such as tablets, smartphones, smart TVs, smart refrigerators, and smart media devices, as a measure for realizing the ubiquitous computing. In particular, smartphones have significantly evolved from the traditional feature phones. Increasingly higher-end smartphone models that can perform a range of functions are now available. Smart devices have become widely popular since they provide high efficiency and great convenience for not only private daily activities but also business endeavors. Rapid advancements have been achieved in smart device technologies to improve the end users' convenience. Consequently, many people increasingly rely on smart devices to store their valuable and important data. With this increasing dependence, an important aspect that must be addressed is security issues. Leaking of private information or sensitive business data due to loss or theft of smart devices could result in exorbitant damage. To mitigate these security threats, basic embedded locking features are provided in smart devices. However, these locking features are vulnerable. In this paper, an original security-locking scheme using a rhythm-based locking system (RLS) is proposed to overcome the existing security problems of smart devices. RLS is a user-authenticated system that addresses vulnerability issues in the existing locking features and provides secure confidentiality in addition to convenience.

  3. Variable Flavor Number Scheme for Final State Jets in DIS

    Energy Technology Data Exchange (ETDEWEB)

    Hoang, Andre H. [Wien Univ. (Austria). Fakultaet fuer Physik; Wien Univ. (Austria). Erwin Schroedinger International Inst. for Mathematical Physics; Pietrulewicz, Piotr [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany). Theory Group; Samitz, Daniel [Wien Univ. (Austria). Fakultaet fuer Physik

    2015-08-15

    We discuss massive quark effects in the endpoint region x→1 of inclusive deep inelastic scattering, where the hadronic final state is collimated and thus represents a jet. In this regime heavy quark pairs are generated via secondary radiation, i.e. due to a gluon splitting in light quark initiated contributions starting at O(α{sup 2}{sub s}) in the fixed-order expansion. Based on the factorization framework for massless quarks in Soft Collinear Effective Theory (SCET), we construct a variable flavor number scheme that deals with arbitrary hierarchies between the mass scale and the kinematic scales exhibiting a continuous behavior between the massless limit for very light quarks and the decoupling limit for very heavy quarks. We show that the threshold matching corrections for all gauge invariant components at the mass scale are related to each other via consistency conditions. This is explicitly demonstrated by recalculating the known threshold correction for the parton distribution function at O(α{sup 2}{sub s}C{sub F}T{sub F}) within SCET. The latter contains large rapidity logarithms ∝ln(1-x) that can be summed by exponentiation. Their coefficients are universal which can be used to obtain potentially relevant higher order results for generic threshold corrections at colliders from computations in deep inelastic scattering. In particular, we extract the O(α{sup 3}{sub s}) threshold correction multiplied by a single rapidity logarithm from results obtained earlier.

  4. A Hybrid Scheme for Fine-Grained Search and Access Authorization in Fog Computing Environment.

    Science.gov (United States)

    Xiao, Min; Zhou, Jing; Liu, Xuejiao; Jiang, Mingda

    2017-06-17

    In the fog computing environment, the encrypted sensitive data may be transferred to multiple fog nodes on the edge of a network for low latency; thus, fog nodes need to implement a search over encrypted data as a cloud server. Since the fog nodes tend to provide service for IoT applications often running on resource-constrained end devices, it is necessary to design lightweight solutions. At present, there is little research on this issue. In this paper, we propose a fine-grained owner-forced data search and access authorization scheme spanning user-fog-cloud for resource constrained end users. Compared to existing schemes only supporting either index encryption with search ability or data encryption with fine-grained access control ability, the proposed hybrid scheme supports both abilities simultaneously, and index ciphertext and data ciphertext are constructed based on a single ciphertext-policy attribute based encryption (CP-ABE) primitive and share the same key pair, thus the data access efficiency is significantly improved and the cost of key management is greatly reduced. Moreover, in the proposed scheme, the resource constrained end devices are allowed to rapidly assemble ciphertexts online and securely outsource most of decryption task to fog nodes, and mediated encryption mechanism is also adopted to achieve instantaneous user revocation instead of re-encrypting ciphertexts with many copies in many fog nodes. The security and the performance analysis show that our scheme is suitable for a fog computing environment.

  5. A modified tone injection scheme for PAPR reduction using genetic algorithm

    Directory of Open Access Journals (Sweden)

    Won Cheol Lee

    2015-09-01

    Full Text Available Owing to the capability to provide a wide variety of intelligent behaviors, cognitive radio (CR has become a promising technology to improve spectrum utilization efficiently. One of the popular techniques which adapt CR concept to multi-carrier systems is known as tone injection scheme. This scheme is a sort of peak-to-average-power ratio (PAPR reduction methods deployable to multi-carrier systems such as orthogonal frequency division multiplexing (OFDM. However, a conventional tone injection scheme might increase averaged transmit power attributed to expanding the size of constellation on purpose to get optimal PAPR reduction. Based on a weighted-sum genetic algorithm to resolve multi-objective optimization problem (MOOP, the modified tone injection scheme exploits the agility of CR technology to rapidly adapt operating parameters in order to fulfill PAPR reduction as well as mitigation of power increase optimally. The simulation results verify that the proposed scheme is flexible because it could not only control the performance of PAPR reduction, but also alleviate power increase by steering weight values at the expense of relatively low complexity comparing with other conventional method.

  6. A Hybrid Scheme for Fine-Grained Search and Access Authorization in Fog Computing Environment

    Science.gov (United States)

    Xiao, Min; Zhou, Jing; Liu, Xuejiao; Jiang, Mingda

    2017-01-01

    In the fog computing environment, the encrypted sensitive data may be transferred to multiple fog nodes on the edge of a network for low latency; thus, fog nodes need to implement a search over encrypted data as a cloud server. Since the fog nodes tend to provide service for IoT applications often running on resource-constrained end devices, it is necessary to design lightweight solutions. At present, there is little research on this issue. In this paper, we propose a fine-grained owner-forced data search and access authorization scheme spanning user-fog-cloud for resource constrained end users. Compared to existing schemes only supporting either index encryption with search ability or data encryption with fine-grained access control ability, the proposed hybrid scheme supports both abilities simultaneously, and index ciphertext and data ciphertext are constructed based on a single ciphertext-policy attribute based encryption (CP-ABE) primitive and share the same key pair, thus the data access efficiency is significantly improved and the cost of key management is greatly reduced. Moreover, in the proposed scheme, the resource constrained end devices are allowed to rapidly assemble ciphertexts online and securely outsource most of decryption task to fog nodes, and mediated encryption mechanism is also adopted to achieve instantaneous user revocation instead of re-encrypting ciphertexts with many copies in many fog nodes. The security and the performance analysis show that our scheme is suitable for a fog computing environment. PMID:28629131

  7. An Optimal Spectrum Handoff Scheme for Cognitive Radio Mobile Ad Hoc Networks

    Directory of Open Access Journals (Sweden)

    DUAN, J.

    2011-08-01

    Full Text Available Spectrum handoff procedures occur when the primary users appear in the licensed band temporary occupied by the cognitive radio (CR users and aim to help the CR users to vacate the spectrum rapidly and find available channel to resume the transmission. However, a spectrum handoff scheme that comprehensively considers channel selection, handoff decision as well as space domain handoff is yet undeveloped. In this paper we present a complete optimal spectrum handoff scheme for cognitive radio mobile ad hoc networks. First, we design a spectrum selection mechanism to allow CR users optimally choose the appropriate channel. The spectrum idleness prediction algorithm is utilized based on developing a cooperative spectrum searching approach. Through combining the estimated transmission time, the PU appearance probability and the mean spectrum availability time are integrated to develop the optimal spectrum handoff scheme. Moreover, as one part of the proposed scheme, a geo-location approach is utilized to deal with the space domain handoff. The complete scheme is evaluated through a comprehensive simulation study, and results reveal significant improvements in handoff times and transmission efficiency over conventional approaches.

  8. A classification scheme for risk assessment methods.

    Energy Technology Data Exchange (ETDEWEB)

    Stamp, Jason Edwin; Campbell, Philip LaRoche

    2004-08-01

    This report presents a classification scheme for risk assessment methods. This scheme, like all classification schemes, provides meaning by imposing a structure that identifies relationships. Our scheme is based on two orthogonal aspects--level of detail, and approach. The resulting structure is shown in Table 1 and is explained in the body of the report. Each cell in the Table represent a different arrangement of strengths and weaknesses. Those arrangements shift gradually as one moves through the table, each cell optimal for a particular situation. The intention of this report is to enable informed use of the methods so that a method chosen is optimal for a situation given. This report imposes structure on the set of risk assessment methods in order to reveal their relationships and thus optimize their usage.We present a two-dimensional structure in the form of a matrix, using three abstraction levels for the rows and three approaches for the columns. For each of the nine cells in the matrix we identify the method type by name and example. The matrix helps the user understand: (1) what to expect from a given method, (2) how it relates to other methods, and (3) how best to use it. Each cell in the matrix represent a different arrangement of strengths and weaknesses. Those arrangements shift gradually as one moves through the table, each cell optimal for a particular situation. The intention of this report is to enable informed use of the methods so that a method chosen is optimal for a situation given. The matrix, with type names in the cells, is introduced in Table 2 on page 13 below. Unless otherwise stated we use the word 'method' in this report to refer to a 'risk assessment method', though often times we use the full phrase. The use of the terms 'risk assessment' and 'risk management' are close enough that we do not attempt to distinguish them in this report. The remainder of this report is organized as follows. In

  9. Rapid Airplane Parametric Input Design (RAPID)

    Science.gov (United States)

    Smith, Robert E.

    1995-01-01

    RAPID is a methodology and software system to define a class of airplane configurations and directly evaluate surface grids, volume grids, and grid sensitivity on and about the configurations. A distinguishing characteristic which separates RAPID from other airplane surface modellers is that the output grids and grid sensitivity are directly applicable in CFD analysis. A small set of design parameters and grid control parameters govern the process which is incorporated into interactive software for 'real time' visual analysis and into batch software for the application of optimization technology. The computed surface grids and volume grids are suitable for a wide range of Computational Fluid Dynamics (CFD) simulation. The general airplane configuration has wing, fuselage, horizontal tail, and vertical tail components. The double-delta wing and tail components are manifested by solving a fourth order partial differential equation (PDE) subject to Dirichlet and Neumann boundary conditions. The design parameters are incorporated into the boundary conditions and therefore govern the shapes of the surfaces. The PDE solution yields a smooth transition between boundaries. Surface grids suitable for CFD calculation are created by establishing an H-type topology about the configuration and incorporating grid spacing functions in the PDE equation for the lifting components and the fuselage definition equations. User specified grid parameters govern the location and degree of grid concentration. A two-block volume grid about a configuration is calculated using the Control Point Form (CPF) technique. The interactive software, which runs on Silicon Graphics IRIS workstations, allows design parameters to be continuously varied and the resulting surface grid to be observed in real time. The batch software computes both the surface and volume grids and also computes the sensitivity of the output grid with respect to the input design parameters by applying the precompiler tool

  10. Scheme for Quantum Computing Immune to Decoherence

    Science.gov (United States)

    Williams, Colin; Vatan, Farrokh

    2008-01-01

    A constructive scheme has been devised to enable mapping of any quantum computation into a spintronic circuit in which the computation is encoded in a basis that is, in principle, immune to quantum decoherence. The scheme is implemented by an algorithm that utilizes multiple physical spins to encode each logical bit in such a way that collective errors affecting all the physical spins do not disturb the logical bit. The scheme is expected to be of use to experimenters working on spintronic implementations of quantum logic. Spintronic computing devices use quantum-mechanical spins (typically, electron spins) to encode logical bits. Bits thus encoded (denoted qubits) are potentially susceptible to errors caused by noise and decoherence. The traditional model of quantum computation is based partly on the assumption that each qubit is implemented by use of a single two-state quantum system, such as an electron or other spin-1.2 particle. It can be surprisingly difficult to achieve certain gate operations . most notably, those of arbitrary 1-qubit gates . in spintronic hardware according to this model. However, ironically, certain 2-qubit interactions (in particular, spin-spin exchange interactions) can be achieved relatively easily in spintronic hardware. Therefore, it would be fortunate if it were possible to implement any 1-qubit gate by use of a spin-spin exchange interaction. While such a direct representation is not possible, it is possible to achieve an arbitrary 1-qubit gate indirectly by means of a sequence of four spin-spin exchange interactions, which could be implemented by use of four exchange gates. Accordingly, the present scheme provides for mapping any 1-qubit gate in the logical basis into an equivalent sequence of at most four spin-spin exchange interactions in the physical (encoded) basis. The complexity of the mathematical derivation of the scheme from basic quantum principles precludes a description within this article; it must suffice to report

  11. Autophagy induction by tetrahydrobiopterin deficiency

    Science.gov (United States)

    Kwak, Sang Su; Suk, Jinkyu; Choi, Ji Hye; Yang, Seungkyung; Kim, Jin Woo; Sohn, Seonghyang; Chung, Jae Hoon; Hong, Yong Hee; Lee, Dong Hwan; Ahn, Jeong Keun; Min, Hyesun; Fu, Ya-Min; Meadows, Gary G

    2011-01-01

    Tetrahydrobiopterin (BH4) deficiency is a genetic disorder associated with a variety of metabolic syndromes such as phenylketonuria (PKU). In this article, the signaling pathway by which BH4 deficiency inactivates mTORC1 leading to the activation of the autophagic pathway was studied utilizing BH4-deficient Spr-/- mice generated by the knockout of the gene encoding sepiapterin reductase (SR) catalyzing BH4 synthesis. We found that mTORC1 signaling was inactivated and autophagic pathway was activated in tissues from Spr-/- mice. This study demonstrates that tyrosine deficiency causes mTORC1 inactivation and subsequent activation of autophagic pathway in Spr-/- mice. Therapeutic tyrosine diet completely rescued dwarfism and mTORC1 inhibition but inactivated autophagic pathway in Spr-/- mice. Tyrosine-dependent inactivation of mTORC1 was further supported by mTORC1 inactivation in Pahenu2 mouse model lacking phenylalanine hydroxylase (Pah). NIH3T3 cells grown under the condition of tyrosine restriction exhibited autophagy induction. However, mTORC1 activation by RhebQ64L, a positive regulator of mTORC1, inactivated autophagic pathway in NIH3T3 cells under tyrosine-deficient conditions. In addition, this study first documents mTORC1 inactivation and autophagy induction in PKU patients with BH4 deficiency. PMID:21795851

  12. Advanced induction motor drive control with single current sensor

    Directory of Open Access Journals (Sweden)

    Adžić Evgenije M.

    2016-01-01

    Full Text Available This paper proposes induction motor drive control method which uses minimal number of sensors, providing only DC-link current as a feedback signal. Improved DC-link current sampling scheme and modified asymmetrical switching pattern cancels characteristic waveform errors which exist in all three reconstructed motor line-currents. Motor linecurrent harmonic content is reduced to an acceptable level, eliminating torque and speed oscillations which were inherent for conventional single sensor drives. Consequently, use of single current sensor and line-current reconstruction technique is no longer acceptable only for low and medium performance drives, but also for drives where priority is obtaining a highly accurate, stable and fast response. Proposed control algorithm is validated using induction motor drive hardware prototype based on TMS320F2812 digital signal processor. [Projekat Ministarstva nauke Republike Srbije, br. III 042004 and by the Provincial Secretariat for Science and Technological Development of AP Vojvodina under contract No. 114-451-3508/2013-04

  13. Efficient dynamic graph construction for inductive semi-supervised learning.

    Science.gov (United States)

    Dornaika, F; Dahbi, R; Bosaghzadeh, A; Ruichek, Y

    2017-10-01

    Most of graph construction techniques assume a transductive setting in which the whole data collection is available at construction time. Addressing graph construction for inductive setting, in which data are coming sequentially, has received much less attention. For inductive settings, constructing the graph from scratch can be very time consuming. This paper introduces a generic framework that is able to make any graph construction method incremental. This framework yields an efficient and dynamic graph construction method that adds new samples (labeled or unlabeled) to a previously constructed graph. As a case study, we use the recently proposed Two Phase Weighted Regularized Least Square (TPWRLS) graph construction method. The paper has two main contributions. First, we use the TPWRLS coding scheme to represent new sample(s) with respect to an existing database. The representative coefficients are then used to update the graph affinity matrix. The proposed method not only appends the new samples to the graph but also updates the whole graph structure by discovering which nodes are affected by the introduction of new samples and by updating their edge weights. The second contribution of the article is the application of the proposed framework to the problem of graph-based label propagation using multiple observations for vision-based recognition tasks. Experiments on several image databases show that, without any significant loss in the accuracy of the final classification, the proposed dynamic graph construction is more efficient than the batch graph construction. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Simple and High-Accurate Schemes for Hyperbolic Conservation Laws

    Directory of Open Access Journals (Sweden)

    Renzhong Feng

    2014-01-01

    Full Text Available The paper constructs a class of simple high-accurate schemes (SHA schemes with third order approximation accuracy in both space and time to solve linear hyperbolic equations, using linear data reconstruction and Lax-Wendroff scheme. The schemes can be made even fourth order accurate with special choice of parameter. In order to avoid spurious oscillations in the vicinity of strong gradients, we make the SHA schemes total variation diminishing ones (TVD schemes for short by setting flux limiter in their numerical fluxes and then extend these schemes to solve nonlinear Burgers’ equation and Euler equations. The numerical examples show that these schemes give high order of accuracy and high resolution results. The advantages of these schemes are their simplicity and high order of accuracy.

  15. Rapid shallow breathing

    Science.gov (United States)

    ... the smallest air passages of the lungs in children ( bronchiolitis ) Pneumonia or other lung infection Transient tachypnea of the newborn Anxiety and panic Other serious lung disease Home Care Rapid, shallow breathing should not be treated at home. It is ...

  16. Rapid Strep Test

    Science.gov (United States)

    ... worse than normal. Your first thoughts turn to strep throat. A rapid strep test in your doctor’s office ... your suspicions.Viruses cause most sore throats. However, strep throat is an infection caused by the Group A ...

  17. Transverse Hilbert schemes and completely integrable systems

    Directory of Open Access Journals (Sweden)

    Donin Niccolò Lora Lamia

    2017-12-01

    Full Text Available In this paper we consider a special class of completely integrable systems that arise as transverse Hilbert schemes of d points of a complex symplectic surface S projecting onto ℂ via a surjective map p which is a submersion outside a discrete subset of S. We explicitly endow the transverse Hilbert scheme Sp[d] with a symplectic form and an endomorphism A of its tangent space with 2-dimensional eigenspaces and such that its characteristic polynomial is the square of its minimum polynomial and show it has the maximal number of commuting Hamiltonians.We then provide the inverse construction, starting from a 2ddimensional holomorphic integrable system W which has an endomorphism A: TW → TW satisfying the above properties and recover our initial surface S with W ≌ Sp[d].

  18. A hybrid Lagrangian Voronoi-SPH scheme

    Science.gov (United States)

    Fernandez-Gutierrez, D.; Souto-Iglesias, A.; Zohdi, T. I.

    2017-11-01

    A hybrid Lagrangian Voronoi-SPH scheme, with an explicit weakly compressible formulation for both the Voronoi and SPH sub-domains, has been developed. The SPH discretization is substituted by Voronoi elements close to solid boundaries, where SPH consistency and boundary conditions implementation become problematic. A buffer zone to couple the dynamics of both sub-domains is used. This zone is formed by a set of particles where fields are interpolated taking into account SPH particles and Voronoi elements. A particle may move in or out of the buffer zone depending on its proximity to a solid boundary. The accuracy of the coupled scheme is discussed by means of a set of well-known verification benchmarks.

  19. Cryptanalysis of Two Fault Countermeasure Schemes

    DEFF Research Database (Denmark)

    Banik, Subhadeep; Bogdanov, Andrey

    2015-01-01

    is meant for the protection of block ciphers like AES. The second countermeasure was proposed in IEEE-HOST 2015 and protects the Grain-128 stream cipher. The design divides the output function used in Grain-128 into two components. The first called the masking function, masks the input bits to the output...... use the internally generated random bits which make these designs vulnerable. We will outline attacks that cryptanalyze the above schemes using 66 and 512 faults respectively....... function with some additional randomness and computes the value of the function. The second called the unmasking function, is computed securely using a different register and undoes the effect of the masking with random bits. We will show that there exists a weakness in the way in which both these schemes...

  20. Fixed Wordsize Implementation of Lifting Schemes

    Directory of Open Access Journals (Sweden)

    Tanja Karp

    2007-01-01

    Full Text Available We present a reversible nonlinear discrete wavelet transform with predefined fixed wordsize based on lifting schemes. Restricting the dynamic range of the wavelet domain coefficients due to a fixed wordsize may result in overflow. We show how this overflow has to be handled in order to maintain reversibility of the transform. We also perform an analysis on how large a wordsize of the wavelet coefficients is needed to perform optimal lossless and lossy compressions of images. The scheme is advantageous to well-known integer-to-integer transforms since the wordsize of adders and multipliers can be predefined and does not increase steadily. This also results in significant gains in hardware implementations.

  1. New communication schemes based on adaptive synchronization.

    Science.gov (United States)

    Yu, Wenwu; Cao, Jinde; Wong, Kwok-Wo; Lü, Jinhu

    2007-09-01

    In this paper, adaptive synchronization with unknown parameters is discussed for a unified chaotic system by using the Lyapunov method and the adaptive control approach. Some communication schemes, including chaotic masking, chaotic modulation, and chaotic shift key strategies, are then proposed based on the modified adaptive method. The transmitted signal is masked by chaotic signal or modulated into the system, which effectively blurs the constructed return map and can resist this return map attack. The driving system with unknown parameters and functions is almost completely unknown to the attackers, so it is more secure to apply this method into the communication. Finally, some simulation examples based on the proposed communication schemes and some cryptanalysis works are also given to verify the theoretical analysis in this paper.

  2. Optimization of Train Trip Package Operation Scheme

    Directory of Open Access Journals (Sweden)

    Lu Tong

    2015-01-01

    Full Text Available Train trip package transportation is an advanced form of railway freight transportation, realized by a specialized train which has fixed stations, fixed time, and fixed path. Train trip package transportation has lots of advantages, such as large volume, long distance, high speed, simple forms of organization, and high margin, so it has become the main way of railway freight transportation. This paper firstly analyzes the related factors of train trip package transportation from its organizational forms and characteristics. Then an optimization model for train trip package transportation is established to provide optimum operation schemes. The proposed model is solved by the genetic algorithm. At last, the paper tests the model on the basis of the data of 8 regions. The results show that the proposed method is feasible for solving operation scheme issues of train trip package.

  3. A numerical relativity scheme for cosmological simulations

    Science.gov (United States)

    Daverio, David; Dirian, Yves; Mitsou, Ermis

    2017-12-01

    Cosmological simulations involving the fully covariant gravitational dynamics may prove relevant in understanding relativistic/non-linear features and, therefore, in taking better advantage of the upcoming large scale structure survey data. We propose a new 3  +  1 integration scheme for general relativity in the case where the matter sector contains a minimally-coupled perfect fluid field. The original feature is that we completely eliminate the fluid components through the constraint equations, thus remaining with a set of unconstrained evolution equations for the rest of the fields. This procedure does not constrain the lapse function and shift vector, so it holds in arbitrary gauge and also works for arbitrary equation of state. An important advantage of this scheme is that it allows one to define and pass an adaptation of the robustness test to the cosmological context, at least in the case of pressureless perfect fluid matter, which is the relevant one for late-time cosmology.

  4. Optimizing multiplexing scheme in interferometric microscopy

    Science.gov (United States)

    Tayebi, Behnam; Jaferzadeh, Keyvan; Sharif, Farnaz; Han, Jae-Ho

    2016-08-01

    In single exposure off-axis interferometry, multiple information can be recorded by spatial frequency multiplexing. We investigate optimum conditions for designing 2D sampling schemes to record larger field of view in off-axis interferometry multiplexing. The spatial resolution of the recorded image is related to the numerical aperture of the system and sensor pixel size. The spatial resolution should preserve by avoiding crosstalk in the frequency domain. Furthermore, the field of view depends on the sensor size and magnification of the imaging system. In order to preserve resolution and have a larger field of view, the frequency domain should be designed correctly. The experimental results demonstrate that selecting the wrong geometrical scheme in frequency domain decrease the recorded image area.

  5. Exclusion from the Health Insurance Scheme

    CERN Multimedia

    2003-01-01

    A CERN pensioner, member of the Organization's Health Insurance Scheme (CHIS), recently provided fake documents in support of claims for medical expenses, in order to receive unjustified reimbursement from the CHIS. The Administrator of the CHIS, UNIQA, suspected a case of fraud: Accordingly, an investigation and interview of the person concerned was carried out and brought the Organization to the conclusion that fraud had actually taken place. Consequently and in accordance with Article VIII 3.12 of the CHIS Rules, it was decided to exclude this member permanently from the CHIS. The Organization takes the opportunity to remind Scheme members that any fraud or attempt to fraud established within the framework of the CHIS exposes them to: - disciplinary action, according to the Staff Rules and Regulations, for CERN members of the personnel; - definitive exclusion from the CHIS for members affiliated on a voluntary basis. Human Resources Division Tel. 73635

  6. RAPID3? Aptly named!

    Science.gov (United States)

    Berthelot, J-M

    2014-01-01

    The RAPID3 score is the sum of three 0-10 patient self-report scores: pain, functional impairment on MDHAQ, and patient global estimate. It requires 5 seconds for scoring and can be used in all rheumatologic conditions, although it has mostly been used in rheumatoid arthritis where cutoffs for low disease activity (12/30) have been set. A RAPID3 score of ≤ 3/30 with 1 or 0 swollen joints (RAPID3 ≤ 3 + ≤ SJ1) provides remission criteria comparable to Boolean, SDAI, CDAI, and DAS28 remission criteria, in far less time than a formal joint count. RAPID3 performs as well as the DAS28 in separating active drugs from placebos in clinical trials. RAPID3 also predicts subsequent structural disease progression. RAPID3 can be determined at short intervals at home, allowing the determination of the area under the curve of disease activity between two visits and flare detection. However, RAPID3 should not be seen as a substitute for DAS28 and face to face visits in routine care. Monitoring patient status with only self-report information without a rheumatologist's advice (including joints and physical examination, and consideration of imaging and laboratory tests) may indeed be as undesirable for most patients than joint examination without a patient questionnaire. Conversely, combining the RAPID3 and the DAS28 may consist in faster or more sensitive confirmation that a medication is effective. Similarly, better enquiring of most important concerns of patients (pain, functional status and overall opinion on their disorder) should reinforces patients' confidence in their rheumatologist and treatments.

  7. A Peer-Mentoring Scheme for Immigrant Students in English Secondary Schools: A Support Mechanism for Promoting Inclusion?

    Science.gov (United States)

    Messiou, Kyriaki; Azaola, Marta Cristina

    2018-01-01

    Immigration in Europe has increased rapidly over the last years. As a result, schools are accepting students arriving from other countries at various stages of the school year. This can be a challenging process both for students and for schools. This paper describes the introduction of a peer-mentoring scheme to support immigrant students in three…

  8. An Inductive Link-Based Wireless Power Transfer System for Biomedical Applications

    Directory of Open Access Journals (Sweden)

    M. A. Adeeb

    2012-01-01

    Full Text Available A wireless power transfer system using an inductive link has been demonstrated for implantable sensor applications. The system is composed of two primary blocks: an inductive power transfer unit and a backward data communication unit. The inductive link performs two functions: coupling the required power from a wireless power supply system enabling battery-less, long-term implant operation and providing a backward data transmission path. The backward data communication unit transmits the data to an outside reader using FSK modulation scheme via the inductive link. To demonstrate the operation of the inductive link, a board-level design has been implemented with high link efficiency. Test results from a fabricated sensor system, composed of a hybrid implementation of custom-integrated circuits and board-level discrete components, are presented demonstrating power transmission of 125 mW with a 12.5% power link transmission efficiency. Simultaneous backward data communication involving a digital pulse rate of up to 10 kbps was also observed.

  9. METAPHORIC MECHANISMS IN IMAGE SCHEME DEVELOPMENT

    OpenAIRE

    Pankratova, S.A.

    2017-01-01

    Problems of knowledge representation by means of images are still cognitively significant and invariably modern. The article deals with the image heuristic potential of a bookish sphere as a donor of meanings, aiding metaphoric scheme development of another modern sphere of cinematography. The key factor here is the differentiation between two basically different metaphor types – heuristic epiphora and image diaphora. The author had offered a unique methodology of counting of quantitative par...

  10. [A scheme to support teenagers in care].

    Science.gov (United States)

    Maldera, David

    In some family situations, the placement of a teenager, even in the case of a court decision, proves ineffective. The accumulation of all kinds of difficulties requires a different type of support, based on responsiveness, attention and above all time to come together. A dedicated scheme helps to prevent situations of waywardness or marginalisation among these teenagers and to support the families. Copyright © 2017 Elsevier Masson SAS. All rights reserved.

  11. The Emergent Universe scheme and tunneling

    Energy Technology Data Exchange (ETDEWEB)

    Labraña, Pedro [Departamento de Física, Universidad del Bío-Bío, Avenida Collao 1202, Casilla 5-C, Concepción, Chile and Departament d' Estructura i Constituents de la Matèria and Institut de Ciències del Cosmos, Universitat (Spain)

    2014-07-23

    We present an alternative scheme for an Emergent Universe scenario, developed previously in Phys. Rev. D 86, 083524 (2012), where the universe is initially in a static state supported by a scalar field located in a false vacuum. The universe begins to evolve when, by quantum tunneling, the scalar field decays into a state of true vacuum. The Emergent Universe models are interesting since they provide specific examples of non-singular inflationary universes.

  12. Failure of a proposed superluminal scheme

    Science.gov (United States)

    Furuya, K.; Milonni, P. W.; Steinberg, A. M.; Wolinsky, M.

    1999-02-01

    We consider a “superluminal quantum Morse telegraph”, recently proposed by Garuccio, involving a polarization-correlated photon pair and a Michelson interferometer in which one of the mirrors is replaced by a phase-conjugating mirror (PCM). Superluminal information transfer in this scheme is precluded by the impossibility of distinguishing between unpolarized photons prepared by mixing linear polarization states or by mixing circular polarization states.

  13. Efficient Scheme for Chemical Flooding Simulation

    Directory of Open Access Journals (Sweden)

    Braconnier Benjamin

    2014-07-01

    Full Text Available In this paper, we investigate an efficient implicit scheme for the numerical simulation of chemical enhanced oil recovery technique for oil fields. For the sake of brevity, we only focus on flows with polymer to describe the physical and numerical models. In this framework, we consider a black oil model upgraded with the polymer modeling. We assume the polymer only transported in the water phase or adsorbed on the rock following a Langmuir isotherm. The polymer reduces the water phase mobility which can change drastically the behavior of water oil interfaces. Then, we propose a fractional step technique to resolve implicitly the system. The first step is devoted to the resolution of the black oil subsystem and the second to the polymer mass conservation. In such a way, jacobian matrices coming from the implicit formulation have a moderate size and preserve solvers efficiency. Nevertheless, the coupling between the black-oil subsystem and the polymer is not fully resolved. For efficiency and accuracy comparison, we propose an explicit scheme for the polymer for which large time step is prohibited due to its CFL (Courant-Friedrichs-Levy criterion and consequently approximates accurately the coupling. Numerical experiments with polymer are simulated : a core flood, a 5-spot reservoir with surfactant and ions and a 3D real case. Comparisons are performed between the polymer explicit and implicit scheme. They prove that our polymer implicit scheme is efficient, robust and resolves accurately the coupling physics. The development and the simulations have been performed with the software PumaFlow [PumaFlow (2013 Reference manual, release V600, Beicip Franlab].

  14. Cost Comparison Among Provable Data Possession Schemes

    Science.gov (United States)

    2016-03-01

    one more than the total number of blocks or one more than `, whichever is less. min ( f s/bs, `) + 1 (4.10) 4.3.1 MAC-PDP For local data experiments, we...NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA THESIS COST COMPARISON AMONG PROVABLE DATA POSSESSION SCHEMES by Stephen J. Bremer March 2016 Thesis...response, including the time for reviewing instruction, searching existing data sources, gathering and maintaining the data needed, and completing and

  15. New control strategy of stand-alone brushless doubly-fed induction generator for supplying unbalanced loads in ship shaft power generation system

    DEFF Research Database (Denmark)

    Liu, Yi; Xu, Wei; Xiong, Fei

    2017-01-01

    system. The positive-and negative-sequence components of the unbalanced power winding (PW) voltage caused by the unbalanced loads are regulated separately. Comprehensive experiments are carried out on a prototype BDFIG by employing the conventional and proposed control schemes. The experimental results......The ship shaft power generation system based on a stand-alone brushless doubly-fed induction generator (BDFIG) have demonstrated excellent saving-energy performance. This paper presents a new control scheme of the stand-alone BDFIG for supplying unbalanced loads in the ship shaft power generation...... verify the good performance of the proposed control scheme....

  16. A rational function based scheme for solving advection equation

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, Feng [Gunma Univ., Kiryu (Japan). Faculty of Engineering; Yabe, Takashi

    1995-07-01

    A numerical scheme for solving advection equations is presented. The scheme is derived from a rational interpolation function. Some properties of the scheme with respect to convex-concave preserving and monotone preserving are discussed. We find that the scheme is attractive in surpressinging overshoots and undershoots even in the vicinities of discontinuity. The scheme can also be easily swicthed as the CIP (Cubic interpolated Pseudo-Particle) method to get a third-order accuracy in smooth region. Numbers of numerical tests are carried out to show the non-oscillatory and less diffusive nature of the scheme. (author).

  17. Cryptanalytic Performance Appraisal of Improved CCH2 Proxy Multisignature Scheme

    Directory of Open Access Journals (Sweden)

    Raman Kumar

    2014-01-01

    Full Text Available Many of the signature schemes are proposed in which the t out of n threshold schemes are deployed, but they still lack the property of security. In this paper, we have discussed implementation of improved CCH1 and improved CCH2 proxy multisignature scheme based on elliptic curve cryptosystem. We have represented time complexity, space complexity, and computational overhead of improved CCH1 and CCH2 proxy multisignature schemes. We have presented cryptanalysis of improved CCH2 proxy multisignature scheme and showed that improved CCH2 scheme suffered from various attacks, that is, forgery attack and framing attack.

  18. A weak blind signature scheme based on quantum cryptography

    Science.gov (United States)

    Wen, Xiaojun; Niu, Xiamu; Ji, Liping; Tian, Yuan

    2009-02-01

    In this paper, we present a weak blind signature scheme based on the correlation of EPR (Einstein-Padolsky-Rosen) pairs. Different from classical blind signature schemes and current quantum signature schemes, our quantum blind signature scheme could guarantee not only the unconditionally security but also the anonymity of the message owner. To achieve that, quantum key distribution and one-time pad are adopted in our scheme. Experimental analysis proved that our scheme have the characteristics of non-counterfeit, non-disavowal, blindness and traceability. It has a wide application to E-payment system, E-government, E-business, and etc.

  19. Fractal-based image sequence compression scheme

    Science.gov (United States)

    Li, Haibo; Novak, Mirek; Forchheimer, Robert

    1993-07-01

    The dominant image transformation used in the existing fractal coding schemes is the affine function. Although an affine transformation is easy to compute and understand, its linear approximation ability limits the employment of larger range blocks, that is, it limits further improvement in compression efficiency. We generalize the image transformation from the usual affine form to the more general quadratic form, and provide theoretical requirements for the generalized transformation to be contractive. Based on the self-transformation system (STS) model, an image sequence coding scheme--fractal-based image sequence coding--is proposed. In this coding scheme, our generalized transformation is used to model the self- transformation is used to model the self-transformation from the domain block to its range blocks. Experimental results on a real image sequence show that for the same size of blocks, the SNR can be improved by 10 dB, or, for the same SNR of the decoded image sequence, the compression ratio is raised twofold when the new generalized transformation is used to replace the usual affine transformation. In addition, due to the utilization of the STS model, the computational complexity is only linearly related to the size of the 3-D blocks. This provides for fast encoding and decoding.

  20. Doppler Shift Compensation Schemes in VANETs

    Directory of Open Access Journals (Sweden)

    F. Nyongesa

    2015-01-01

    Full Text Available Over the last decade vehicle-to-vehicle (V2V communication has received a lot of attention as it is a crucial issue in intravehicle communication as well as in Intelligent Transportation System (ITS. In ITS the focus is placed on integration of communication between mobile and fixed infrastructure to execute road safety as well as nonsafety information dissemination. The safety application such as emergence alerts lays emphasis on low-latency packet delivery rate (PDR, whereas multimedia and infotainment call for high data rates at low bit error rate (BER. The nonsafety information includes multimedia streaming for traffic information and infotainment applications such as playing audio content, utilizing navigation for driving, and accessing Internet. A lot of vehicular ad hoc network (VANET research has focused on specific areas including channel multiplexing, antenna diversity, and Doppler shift compensation schemes in an attempt to optimize BER performance. Despite this effort few surveys have been conducted to highlight the state-of-the-art collection on Doppler shift compensation schemes. Driven by this cause we survey some of the recent research activities in Doppler shift compensation schemes and highlight challenges and solutions as a stock-taking exercise. Moreover, we present open issues to be further investigated in order to address the challenges of Doppler shift in VANETs.

  1. Progress on Implementing Additional Physics Schemes into ...

    Science.gov (United States)

    The U.S. Environmental Protection Agency (USEPA) has a team of scientists developing a next generation air quality modeling system employing the Model for Prediction Across Scales – Atmosphere (MPAS-A) as its meteorological foundation. Several preferred physics schemes and options available in the Weather Research and Forecasting (WRF) model are regularly used by the USEPA with the Community Multiscale Air Quality (CMAQ) model to conduct retrospective air quality simulations. These include the Pleim surface layer, the Pleim-Xiu (PX) land surface model with fractional land use for a 40-class National Land Cover Database (NLCD40), the Asymmetric Convective Model 2 (ACM2) planetary boundary layer scheme, the Kain-Fritsch (KF) convective parameterization with subgrid-scale cloud feedback to the radiation schemes and a scale-aware convective time scale, and analysis nudging four-dimensional data assimilation (FDDA). All of these physics modules and options have already been implemented by the USEPA into MPAS-A v4.0, tested, and evaluated (please see the presentations of R. Gilliam and R. Bullock at this workshop). Since the release of MPAS v5.1 in May 2017, work has been under way to implement these preferred physics options into the MPAS-A v5.1 code. Test simulations of a summer month are being conducted on a global variable resolution mesh with the higher resolution cells centered over the contiguous United States. Driving fields for the FDDA and soil nudging are

  2. INFORMATION FROM THE CERN HEALTH INSURANCE SCHEME

    CERN Multimedia

    Tel : 7-3635

    2002-01-01

    Please note that, from 1 July 2002, the tariff agreement between CERN and the Hôpital de la Tour will no longer be in force. As a result the members of the CERN Health Insurance Scheme will no longer obtain a 5% discount for quick payment of bills. More information on the termination of the agreement and the implications for our Health Insurance Scheme will be provided in the next issue of the CHIS Bull', due for publication in the first half of July. It will be sent to your home address, so, if you have moved recently, please check that your divisional secretariat has your current address. Tel.: 73635 The Organization's Health Insurance Scheme (CHIS) has launched its own Web pages, located on the Website of the Social & Statutory Conditions Group of HR Division (HR-SOC). The address is short and easy-to-remember www.cern.ch/chis The pages currently available concentrate on providing basic information. Over the coming months it is planned to fill out the details and introduce new topics. Please give us ...

  3. Dynamical decoupling schemes derived from Hamilton cycles

    Science.gov (United States)

    Rötteler, Martin

    2008-04-01

    We address the problem of decoupling the interactions in a spin network governed by a pair-interaction Hamiltonian. Combinatorial schemes for decoupling and for manipulating the couplings of Hamiltonians have been developed, which use selective pulses. In this paper, we consider an additional requirement on these pulse sequences: as few different control operations as possible should be used. This requirement is motivated by the fact that to find an optimal implementation of each individual selective pulse will be expensive since it requires to solve a pulse shaping problem. Hence, it is desirable to use as few different selective pulses as possible. As a first result, we show that for d-dimensional systems, where d ⩾2, the ability to implement only two control operations is sufficient to turn off the time evolution. Next, we address the case of a bipartite system with local control and show that four different control operations are sufficient. Finally, turning to networks consisting of several d-dimensional nodes, we show that decoupling can be achieved if one is able to control a number of different control operations, which is logarithmic in the number of nodes. We give an explicit family of efficient decoupling schemes with logarithmic number of different pulses based on the classic Hamming codes. We also provide a table of the best known decoupling schemes for small networks of qubits.

  4. Induction of labour for improving birth outcomes for women at or beyond term

    Science.gov (United States)

    Gülmezoglu, A Metin; Crowther, Caroline A; Middleton, Philippa; Heatley, Emer

    2014-01-01

    Background As a pregnancy continues beyond term the risks of babies dying inside the womb or in the immediate newborn period increase. Whether a policy of labour induction at a predetermined gestational age can reduce this increased risk is the subject of this review. Objectives To evaluate the benefits and harms of a policy of labour induction at term or post-term compared with awaiting spontaneous labour or later induction of labour. Search methods We searched the Cochrane Pregnancy and Childbirth Group’s Trials Register (31 March 2012). Selection criteria Randomised controlled trials conducted in women at or beyond term. The eligible trials were those comparing a policy of labour induction with a policy of awaiting spontaneous onset of labour. Cluster-randomised trials and cross-over trials are not included. Quasi-random allocation schemes such as alternation, case record numbers or open random-number lists were not eligible. Data collection and analysis Two review authors independently assessed trials for inclusion. Two review authors independently assessed trial quality and extracted data. Data were checked for accuracy. Outcomes are analysed in two main categories: gestational age and cervix status. Main results We included 22 trials reporting on 9383 women. The trials were generally at moderate risk of bias. Compared with a policy of expectant management, a policy of labour induction was associated with fewer (all-cause) perinatal deaths: risk ratio (RR) 0.31, 95% confidence interval (CI) 0.12 to 0.88; 17 trials, 7407 women. There was one perinatal death in the labour induction policy group compared with 13 perinatal deaths in the expectant management group. The number needed to treat to benefit (NNTB) with induction of labour in order to prevent one perinatal death was 410 (95% CI 322 to 1492). For the primary outcome of perinatal death and most other outcomes, no differences between timing of induction subgroups were seen; the majority of trials adopted

  5. Selective Induction of Optical Magnetism.

    Science.gov (United States)

    Manna, Uttam; Lee, Jung-Hoon; Deng, Tian-Song; Parker, John; Shepherd, Nolan; Weizmann, Yossi; Scherer, Norbert F

    2017-12-13

    An extension of the Maxwell-Faraday law of electromagnetic induction to optical frequencies requires spatially appropriate materials and optical beams to create resonances and excitations with curl. Here we employ cylindrical vector beams with azimuthal polarization to create electric fields that selectively drive magnetic responses in dielectric core-metal nanoparticle "satellite" nanostructures. These optical frequency magnetic resonances are induced in materials that do not possess spin or orbital angular momentum. Multipole expansion analysis of the scattered fields obtained from electrodynamics simulations show that the excitation with azimuthally polarized beams selectively enhances magnetic vs electric dipole resonances by nearly 100-fold in experiments. Multipolar resonances (e.g., quadrupole and octupole) are enhanced 5-fold by focused azimuthally versus linearly polarized beams. We also selectively excite electric multipolar resonances in the same identical nanostructures with radially polarized light. This work opens new opportunities for spectroscopic investigation and control of "dark modes", Fano resonances, and magnetic modes in nanomaterials and engineered metamaterials.

  6. BACKWARD INDUCTION: MERITS AND FLAWS

    Directory of Open Access Journals (Sweden)

    Kamiński Marek M.

    2017-06-01

    Full Text Available Backward induction (BI was one of the earliest methods developed for solving finite sequential games with perfect information. It proved to be especially useful in the context of Tom Schelling’s ideas of credible versus incredible threats. BI can be also extended to solve complex games that include an infinite number of actions or an infinite number of periods. However, some more complex empirical or experimental predictions remain dramatically at odds with theoretical predictions obtained by BI. The primary example of such a troublesome game is Centipede. The problems appear in other long games with sufficiently complex structure. BI also shares the problems of subgame perfect equilibrium and fails to eliminate certain unreasonable Nash equilibria.

  7. Induction Magnetometers – Design Peculiarities

    Directory of Open Access Journals (Sweden)

    Valeriy KOREPANOV

    2010-09-01

    Full Text Available Induction or search-coil magnetometers (IM are widely used in many branches of science and industry. The frequency range and dynamic range of IMs are probably the widest of all existing magnetometers: they are used for the measurement of magnetic field variations in the frequency band from ~10-4 till ~106 Hz with the intensities from fractions of femtotesla till tens of tesla. This explains the permanent interest to IM design and the attempts to construct the IMs with best possible parameters. The present paper deals with the peculiarities of IM design. An attempt to re-establish the correctness of priorities in the field is made and the approaches to the IM optimization and their quality estimation are described.

  8. Design and Optimization of a 3-Coil Inductive Link for Efficient Wireless Power Transmission.

    Science.gov (United States)

    Kiani, Mehdi; Jow, Uei-Ming; Ghovanloo, Maysam

    2011-07-14

    Inductive power transmission is widely used to energize implantable microelectronic devices (IMDs), recharge batteries, and energy harvesters. Power transfer efficiency (PTE) and power delivered to the load (PDL) are two key parameters in wireless links, which affect the energy source specifications, heat dissipation, power transmission range, and interference with other devices. To improve the PTE, a 4-coil inductive link has been recently proposed. Through a comprehensive circuit based analysis that can guide a design and optimization scheme, we have shown that despite achieving high PTE at larger coil separations, the 4-coil inductive links fail to achieve a high PDL. Instead, we have proposed a 3-coil inductive power transfer link with comparable PTE over its 4-coil counterpart at large coupling distances, which can also achieve high PDL. We have also devised an iterative design methodology that provides the optimal coil geometries in a 3-coil inductive power transfer link. Design examples of 2-, 3-, and 4-coil inductive links have been presented, and optimized for 13.56 MHz carrier frequency and 12 cm coupling distance, showing PTEs of 15%, 37%, and 35%, respectively. At this distance, the PDL of the proposed 3-coil inductive link is 1.5 and 59 times higher than its equivalent 2- and 4-coil links, respectively. For short coupling distances, however, 2-coil links remain the optimal choice when a high PDL is required, while 4-coil links are preferred when the driver has large output resistance or small power is needed. These results have been verified through simulations and measurements.

  9. Mineral induction by immobilized phosphoproteins

    Science.gov (United States)

    Saito, T.; Arsenault, A. L.; Yamauchi, M.; Kuboki, Y.; Crenshaw, M. A.

    1997-01-01

    Dentin phosphoproteins are thought to have a primary role in the deposition of mineral on the collagen of dentin. In this study we determined the type of binding between collagen and phosphoproteins necessary for mineral formation onto collagen fibrils and whether the phosphate esters are required. Bovine dentin phosphophoryn or phosvitin from egg yolk were immobilized on reconstituted skin type I collagen fibrils by adsorption or by covalent cross-linking. In some samples the ester phosphate was removed from the covalently cross-linked phosphoproteins by treatment with acid phosphatase. All samples were incubated at 37 degrees C in metastable solutions that do not spontaneously precipitate. Reconstituted collagen fibrils alone did not induce mineral formation. The phosphoproteins adsorbed to the collagen fibrils desorbed when the mineralization medium was added, and mineral was not induced. The mineral induced by the cross-linked phosphoproteins was apatite, and the crystals were confined to the surface of the collagen fibrils. With decreasing medium saturation the time required for mineral induction increased. The interfacial tensions calculated for apatite formation by either phosphoprotein cross-linked to collagen were about the same as that for phosphatidic acid liposomes and hydroxyapatite. This similarity in values indicates that the nucleation potential of these highly phosphorylated surfaces is about the same. It is concluded that phosphoproteins must be irreversibly bound to collagen fibrils for the mineralization of the collagen network in solutions that do not spontaneously precipitate. The phosphate esters of phosphoproteins are required for mineral induction, and the carboxylate groups are not sufficient.

  10. Dual-Electrical-Port Control of Cascaded Brushless Doubly-Fed Induction Drive for EV/HEV Applications

    DEFF Research Database (Denmark)

    Han, Peng; Cheng, Ming; Chen, Zhe

    2016-01-01

    This paper presents a dual-electrical-port control scheme of cascaded brushless doubly-fed induction machine (CBDFIM) for EV/HEV applications aiming at achieving doubled constant torque and constant power regions compared to its singly-fed counterpart with the same equivalent pole pair number....... The proposed control method enables the synchronous control of both current inputs of power winding and control winding and as a consequence, not only the control complexity, but also slip frequency and core loss are significantly reduced in comparison with the single-electrical-port control scheme. Computer...

  11. A comparative study of field-oriented control and direct-torque control of induction motors using an adaptive flux observer

    Directory of Open Access Journals (Sweden)

    Chikhi Abdesselam

    2010-01-01

    Full Text Available This paper presents a comparative study of field-oriented control (IFOC and direct-torque control (DTC of induction motors using an adaptive flux observer. The main characteristics of field-oriented control and direct torque control schemes are studied by simulation, emphasizing their advantages and disadvantages. The performances of the two control schemes are evaluated in terms of torque, current ripples and transient responses to load toque variations. We can nevertheless observe a slight advance of DTC scheme compared to FOC scheme regarding the dynamic flux control performance and the implementation complexity. Consequently, the choice of one or the other scheme will depend mainly on specific requirements of the application.

  12. CELLS v1.0: updated and parallelized version of an electrical scheme to simulate multiple electrified clouds and flashes over large domains

    Directory of Open Access Journals (Sweden)

    C. Barthe

    2012-01-01

    Full Text Available The paper describes the fully parallelized electrical scheme CELLS which is suitable to simulate explicitly electrified storm systems on parallel computers. Our motivation here is to show that a cloud electricity scheme can be developed for use on large grids with complex terrain. Large computational domains are needed to perform real case meteorological simulations with many independent convective cells.

    The scheme computes the bulk electric charge attached to each cloud particle and hydrometeor. Positive and negative ions are also taken into account. Several parametrizations of the dominant non-inductive charging process are included and an inductive charging process as well. The electric field is obtained by inverting the Gauss equation with an extension to terrain-following coordinates. The new feature concerns the lightning flash scheme which is a simplified version of an older detailed sequential scheme. Flashes are composed of a bidirectional leader phase (vertical extension from the triggering point and a phase obeying a fractal law (with horizontal extension on electrically charged zones. The originality of the scheme lies in the way the branching phase is treated to get a parallel code.

    The complete electrification scheme is tested for the 10 July 1996 STERAO case and for the 21 July 1998 EULINOX case. Flash characteristics are analysed in detail and additional sensitivity experiments are performed for the STERAO case. Although the simulations were run for flat terrain conditions, they show that the model behaves well on multiprocessor computers. This opens a wide area of application for this electrical scheme with the next objective of running real meterological case on large domains.

  13. Inductance identification of an induction machine taking load-dependent saturation into account

    OpenAIRE

    Ranta, Mikaela; Hinkkanen, Marko; Luomi, Jorma

    2008-01-01

    The paper proposes an identification method for the inductances of induction machines, based on signal injection. Due to magnetic saturation, a saturation-induced saliency appears in the induction motor, and the total leakage inductance estimate depends on the angle of the excitation signal. The proposed identification method is based on a small-signal model that includes the saturation-induced saliency. Because of the saturation, the load also affects the estimate, and measurements are neede...

  14. Certificateless Key-Insulated Generalized Signcryption Scheme without Bilinear Pairings

    Directory of Open Access Journals (Sweden)

    Caixue Zhou

    2017-01-01

    Full Text Available Generalized signcryption (GSC can be applied as an encryption scheme, a signature scheme, or a signcryption scheme with only one algorithm and one key pair. A key-insulated mechanism can resolve the private key exposure problem. To ensure the security of cloud storage, we introduce the key-insulated mechanism into GSC and propose a concrete scheme without bilinear pairings in the certificateless cryptosystem setting. We provide a formal definition and a security model of certificateless key-insulated GSC. Then, we prove that our scheme is confidential under the computational Diffie-Hellman (CDH assumption and unforgeable under the elliptic curve discrete logarithm (EC-DL assumption. Our scheme also supports both random-access key update and secure key update. Finally, we evaluate the efficiency of our scheme and demonstrate that it is highly efficient. Thus, our scheme is more suitable for users who communicate with the cloud using mobile devices.

  15. A New Adaptive Hungarian Mating Scheme in Genetic Algorithms

    Directory of Open Access Journals (Sweden)

    Chanju Jung

    2016-01-01

    Full Text Available In genetic algorithms, selection or mating scheme is one of the important operations. In this paper, we suggest an adaptive mating scheme using previously suggested Hungarian mating schemes. Hungarian mating schemes consist of maximizing the sum of mating distances, minimizing the sum, and random matching. We propose an algorithm to elect one of these Hungarian mating schemes. Every mated pair of solutions has to vote for the next generation mating scheme. The distance between parents and the distance between parent and offspring are considered when they vote. Well-known combinatorial optimization problems, the traveling salesperson problem, and the graph bisection problem are used for the test bed of our method. Our adaptive strategy showed better results than not only pure and previous hybrid schemes but also existing distance-based mating schemes.

  16. 7 CFR 400.458 - Scheme or device.

    Science.gov (United States)

    2010-01-01

    ... AGRICULTURE GENERAL ADMINISTRATIVE REGULATIONS Administrative Remedies for Non-Compliance § 400.458 Scheme or... material scheme or device to obtain catastrophic risk protection, other plans of insurance coverage, or...

  17. Scanning schemes in white light photoelasticity - Part II: Novel fringe resolution guided scanning scheme

    Science.gov (United States)

    Ramakrishnan, Vivek; Ramesh, K.

    2017-05-01

    Varied spatial resolution of isochromatic fringes over the domain influences the accuracy of fringe order estimation using TFP/RGB photoelasticity. This has been brought out in the first part of the work. The existing scanning schemes do not take this into account, which leads to the propagation of noise from the low spatial resolution zones. In this paper, a method is proposed for creating a whole field map which represents the spatial resolution of the isochromatic fringe pattern. A novel scanning scheme is then proposed whose progression is guided by the spatial resolution of the fringes in the isochromatic image. The efficacy of the scanning scheme is demonstrated using three problems - an inclined crack under bi-axial loading, a thick ring subjected to internal pressure and a stress frozen specimen of an aerospace component. The proposed scheme has use in a range of applications. The scanning scheme is effective even if the model has random zones of noise which is demonstrated using a plate subjected to concentrated load. This aspect is well utilised to extract fringe data from thin slices cut from a stereo-lithographic model that has characteristic random noise due to layered manufacturing.

  18. Advanced simulation model for IPM motor drive with considering phase voltage and stator inductance

    Science.gov (United States)

    Lee, Dong-Myung; Park, Hyun-Jong; Lee, Ju

    2016-10-01

    This paper proposes an advanced simulation model of driving system for Interior Permanent Magnet (IPM) BrushLess Direct Current (BLDC) motors driven by 120-degree conduction method (two-phase conduction method, TPCM) that is widely used for sensorless control of BLDC motors. BLDC motors can be classified as SPM (Surface mounted Permanent Magnet) and IPM motors. Simulation model of driving system with SPM motors is simple due to the constant stator inductance regardless of the rotor position. Simulation models of SPM motor driving system have been proposed in many researches. On the other hand, simulation models for IPM driving system by graphic-based simulation tool such as Matlab/Simulink have not been proposed. Simulation study about driving system of IPMs with TPCM is complex because stator inductances of IPM vary with the rotor position, as permanent magnets are embedded in the rotor. To develop sensorless scheme or improve control performance, development of control algorithm through simulation study is essential, and the simulation model that accurately reflects the characteristic of IPM is required. Therefore, this paper presents the advanced simulation model of IPM driving system, which takes into account the unique characteristic of IPM due to the position-dependent inductances. The validity of the proposed simulation model is validated by comparison to experimental and simulation results using IPM with TPCM control scheme.

  19. A Fuzzy Commitment Scheme with McEliece's Cipher

    Directory of Open Access Journals (Sweden)

    Deo Brat Ojha

    2010-04-01

    Full Text Available In this paper an attempt has been made to explain a fuzzy commitment scheme with McEliece scheme. The efficiency and security of this cryptosystem is comparatively better than any other cryptosystem. This scheme is one of the interesting candidates for post quantum cryptography. Hence our interest to deal with this system with fuzzy commitment scheme. The concept itself is illustrated with the help of a simple situation and the validation of mathematical experimental verification is provided.

  20. The effect of sampling scheme in the survey of atmospheric deposition of heavy metals in Albania by using moss biomonitoring.

    Science.gov (United States)

    Qarri, Flora; Lazo, Pranvera; Bekteshi, Lirim; Stafilov, Trajce; Frontasyeva, Marina; Harmens, Harry

    2015-02-01

    The atmospheric deposition of heavy metals in Albania was investigated by using a carpet-forming moss species (Hypnum cupressiforme) as bioindicator. Sampling was done in the dry seasons of autumn 2010 and summer 2011. Two different sampling schemes are discussed in this paper: a random sampling scheme with 62 sampling sites distributed over the whole territory of Albania and systematic sampling scheme with 44 sampling sites distributed over the same territory. Unwashed, dried samples were totally digested by using microwave digestion, and the concentrations of metal elements were determined by inductively coupled plasma atomic emission spectroscopy (ICP-AES) and AAS (Cd and As). Twelve elements, such as conservative and trace elements (Al and Fe and As, Cd, Cr, Cu, Ni, Mn, Pb, V, Zn, and Li), were measured in moss samples. Li as typical lithogenic element is also included. The results reflect local emission points. The median concentrations and statistical parameters of elements were discussed by comparing two sampling schemes. The results of both sampling schemes are compared with the results of other European countries. Different levels of the contamination valuated by the respective contamination factor (CF) of each element are obtained for both sampling schemes, while the local emitters identified like iron-chromium metallurgy and cement industry, oil refinery, mining industry, and transport have been the same for both sampling schemes. In addition, the natural sources, from the accumulation of these metals in mosses caused by metal-enriched soil, associated with wind blowing soils were pointed as another possibility of local emitting factors.