WorldWideScience

Sample records for rapid energy development

  1. Sustainable energy for the future. Modelling transitions to renewable and clean energy in rapidly developing countries.

    NARCIS (Netherlands)

    Urban, Frauke

    2009-01-01

    The main objective of this thesis is first to adapt energy models for the use in developing countries and second to model sustainable energy transitions and their effects in rapidly developing countries like China and India. The focus of this thesis is three-fold: a) to elaborate the differences

  2. The Water-Energy-Food Nexus in a Rapidly Developing Resource Sector

    Science.gov (United States)

    Allen, D. M.; Kirste, D. M.

    2014-12-01

    Technological advances and access to global markets have changed the rate at which resource exploitation takes place. The environmental impact of the rapid development and distribution of resources such as minerals and hydrocarbons has led to a greater potential for significant stress on water resources both in terms of quality and quantity. How and where those impacts manifest is crucial to determining appropriate risk management strategies. North East British Columbia has an abundance of shale gas reserves that are anticipated to be exploited at a large scale in coming years, primarily for export as liquefied natural gas (LNG). However, there is growing concern that fracking and other activities related to shale gas development pose risks to water quality and quantity in the region. Water lies at the center of the water-energy-food nexus, with an accelerating water demand for fracking and industrial operations as well as for domestic, environmental and agricultural uses. Climate change is also anticipated to alter the hydrologic regime, posing added stress to the water resource. This case study examines the water-energy-food nexus in the context of a region that is impacted by a rapidly developing resource sector, encompassing water demand/supply, climate change, interaction between deep aquifers and shallow aquifers/surface waters, water quality concerns related to fracking, land use disturbance, and community impacts. Due to the rapid rate of development, there are significant knowledge gaps in our understanding of the water resource. Currently agencies are undertaking water resource assessments and establishing monitoring sites. This research aims to assess water security in North East British Columbia in a coordinated fashion through various partnerships. In addition to collecting baseline knowledge and data, the study will evaluate risk and resilience indicators in relation to water security. A risk assessment framework specific to the shale gas development

  3. Development of compact rapid charging power supply for capacitive energy storage in pulsed power drivers.

    Science.gov (United States)

    Sharma, Surender Kumar; Shyam, Anurag

    2015-02-01

    High energy capacitor bank is used for primary electrical energy storage in pulsed power drivers. The capacitors used in these pulsed power drivers have low inductance, low internal resistance, and less dc life, so it has to be charged rapidly and immediately discharged into the load. A series resonant converter based 45 kV compact power supply is designed and developed for rapid charging of the capacitor bank with constant charging current up to 150 mA. It is short circuit proof, and zero current switching technique is used to commute the semiconductor switch. A high frequency resonant inverter switching at 10 kHz makes the overall size small and reduces the switching losses. The output current of the power supply is limited by constant on-time and variable frequency switching control technique. The power supply is tested by charging the 45 kV/1.67 μF and 15 kV/356 μF capacitor banks. It has charged the capacitor bank up to rated voltage with maximum charging current of 150 mA and the average charging rate of 3.4 kJ/s. The output current of the power supply is limited by reducing the switching frequency at 5 kHz, 3.3 kHz, and 1.7 kHz and tested with 45 kV/1.67 μF capacitor bank. The protection circuit is included in the power supply for over current, under voltage, and over temperature. The design details and the experimental testing results of the power supply for resonant current, output current, and voltage traces of the power supply with capacitive, resistive, and short circuited load are presented and discussed.

  4. The rapid bi-level exploration on the evolution of regional solar energy development

    Science.gov (United States)

    Guan, Qing; An, Haizhong; Li, Huajiao; Hao, Xiaoqing

    2017-01-01

    As one of the renewable energy, solar energy is experiencing increased but exploratory development worldwide. The positive or negative influences of regional characteristics, like economy, production capacity and allowance policies, make them have uneven solar energy development. In this paper, we aim at quickly exploring the features of provincial solar energy development, and their concerns about solar energy. We take China as a typical case, and combine text mining and two-actor networks. We find that the classification of levels based on certain nodes and the amount of degree avoids missing meaningful information that may be ignored by global level results. Moreover, eastern provinces are hot focus for the media, western countries are key to bridge the networks and special administrative region has local development features; third, most focus points are more about the application than the improvement of material. The exploration of news provides practical information to adjust researches and development strategies of solar energy. Moreover, the bi-level exploration, which can also be expanded to multi-level, is helpful for governments or researchers to grasp more targeted and precise knowledge.

  5. Rapid development of tissue bank achieved by International Atomic Energy Agency (IAEA) Tissue Banking Programme in China.

    Science.gov (United States)

    Zhang, Yu-Min; Wang, Jian-Ru; Zhang, Nai-Li; Liu, Xiao-Ming; Zhou, Mo; Ma, Shao-Ying; Yang, Ting; Li, Bao-Xing

    2014-09-01

    Before 1986, the development of tissue banking in China has been slow and relatively uncoordinated. Under the support of International Atomic Energy Agency (IAEA), Tissue Banking in China experienced rapid development. In this period, China Institute for Radiation Protection tissue bank mastered systematic and modern tissue banking technique by IAEA training course and gradually developed the first regional tissue bank (Shanxi Provincial Tissue Bank, SPTB) to provide tissue allograft. Benefit from training course, SPTB promoted the development of tissue transplantation by ways of training, brochure, advertisement and meeting. Tissue allograft transplantation acquired recognition from clinic and supervision and administration from government. Quality system gradually is developing and perfecting. Tissue allograft transplantation and tissue bank are developing rapidly and healthy.

  6. Rapid Energy Modeling Workflow Demonstration

    Science.gov (United States)

    2013-10-31

    BIM Building Information Modeling BPA Building Performance Analysis BTU British Thermal Unit CBECS Commercial Building ...geometry, orientation, weather, and materials, generates 3D Building Information Models ( BIM ) guided by satellite views of building footprints and...Rapid Energy Modeling (REM) workflows that employed building information modeling ( BIM ) approaches and conceptual energy analysis.

  7. Black Carbon and Kerosene Lighting: An Opportunity for Rapid Action on Climate Change and Clean Energy for Development

    Energy Technology Data Exchange (ETDEWEB)

    Jacobson, Arne [Humboldt State Univ., MN (United States). Schatz Energy Research Center; Bond, Tami C. [Univ. of Illinois at Urbana-Champaign, IL (United States). Dept. of Civil and Environmental Engineering; Lam, Nicholoas L. [Univ. of California, Berkeley, CA (United States). Dept. of Environmental Health Sciences; Hultman, Nathan [The Brookings Institution, Washington, DC (United States)

    2013-04-15

    Replacing inefficient kerosene lighting with electric lighting or other clean alternatives can rapidly achieve development and energy access goals, save money and reduce climate warming. Many of the 250 million households that lack reliable access to electricity rely on inefficient and dangerous simple wick lamps and other kerosene-fueled light sources, using 4 to 25 billion liters of kerosene annually to meet basic lighting needs. Kerosene costs can be a significant household expense and subsidies are expensive. New information on kerosene lamp emissions reveals that their climate impacts are substantial. Eliminating current annual black carbon emissions would provide a climate benefit equivalent to 5 gigatons of carbon dioxide reductions over the next 20 years. Robust and low-cost technologies for supplanting simple wick and other kerosene-fueled lamps exist and are easily distributed and scalable. Improving household lighting offers a low-cost opportunity to improve development, cool the climate and reduce costs.

  8. Energy development

    Science.gov (United States)

    Lovich, Jeffrey E.; Jones, L.L.C.; Lovich, R. L.; Halama, K.J.

    2016-01-01

    Large areas of the desert southwest are currently developed or being evaluated for construction of utility-scale renewable energy projects. These projects include numerous solar and wind energy facilities some of which will be massive. Unfortunately, peer-reviewed scientific publications are not yet available to evaluate the potential effects of solar-based utility-scale renewable energy development (USRED) on any species of wildlife, including amphibians and reptiles (herpetofauna). Scientific publications on the effects of wind-based USRED and operation (USREDO) are focused almost exclusively on flying wildlife including birds and bats. To the best of our knowledge the only publications on the effects of wind-based USREDO on herpetofauna are three publications on desert tortoise ecology at a wind energy facility near Palm Springs, California. Those studies suggested that not all effects of USREDO were detrimental in the short-term. However, additional research is required to determine if wind energy operation is compatible with conservation of this long-lived species over longer periods of time.

  9. Rapid Energy Modeling Workflow Demonstration Project

    Science.gov (United States)

    2014-01-01

    BIM Building Information Model BLCC building life cycle costs BPA Building Performance Analysis CAD computer assisted...utilizes information on operations, geometry, orientation, weather, and materials, generating Three-Dimensional (3D) Building Information Models ( BIM ...executed a demonstration of Rapid Energy Modeling (REM) workflows that employed building information modeling ( BIM ) approaches and

  10. Energy and centrality dependence of rapidity densities at RHIC energies.

    Science.gov (United States)

    Wang, X N; Gyulassy, M

    2001-04-16

    The energy and centrality dependence of the charged multiplicity per participant nucleon is shown to be able to differentiate between final state saturation and fixed scale perturbative QCD models of initial entropy production in high-energy heavy-ion collisions. The energy dependence is shown to test the nuclear enhancement of the minijet component of the initial conditions, while the centrality dependence provides a key test of whether gluon saturation is reached at RHIC energies. The HIJING model predicts that the rapidity density per participant increases with centrality, while the saturation model prediction is essentially independent of centrality.

  11. Rapidly Developing Toxic Epidermal Necrolysis

    Directory of Open Access Journals (Sweden)

    Viktoria Oline Barrios Poulsen

    2013-01-01

    Full Text Available Severe cutaneous reactions with potentially fatal outcomes can have many different causes. The Stevens-Johnson syndrome (SJS and toxic epidermal necrolysis (TEN are rare. They are characterized by a low incidence but high mortality, and drugs are most commonly implicated. Urgent active therapy is required. Prompt recognition and withdrawal of suspect drug and rapid intervention can result in favourable outcome. No further international guidelines for treatment exist, and much of the treatment relies on old or experimental concepts with no scientific evidence. We report on a 54-year-old man experiencing rapidly developing drug-induced severe TEN and presented multiorgan failure involving the respiratory and circulatory system, coagulopathy, and renal insufficiency. Detachment counted 30% of total body surface area (TBSA. SCORTEN = 5, indicating a mortality rate >90%. The patient was sedated and mechanically ventilated, supported with fluids and inotropes to maintain a stable circulation. Component therapy was guided by thromboelastography (TEG. The patient received plasmapheresis, and shock reversal treatment was initiated. He was transferred to a specialized intensive care burn unit within 24 hours from admittance. The initial care was continued, and hemodialysis was started. Pulmonary, circulatory, and renal sequelae resolved with intensive care, and re-epithelialization progressed slowly. The patient was discharged home on hospital day 19.

  12. Rapid Glass Refiner Development Program, Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-02-20

    A rapid glass refiner (RGR) technology which could be applied to both conventional and advanced class melting systems would significantly enhance the productivity and the competitiveness of the glass industry in the United States. Therefore, Vortec Corporation, with the support of the US Department of Energy (US DOE) under Cooperative Agreement No. DE-FC07-90ID12911, conducted a research and development program for a unique and innovative approach to rapid glass refining. To provide focus for this research effort, container glass was the primary target from among the principal glass types based on its market size and potential for significant energy savings. Container glass products represent the largest segment of the total glass industry accounting for 60% of the tonnage produced and over 40% of the annual energy consumption of 232 trillion Btu/yr. Projections of energy consumption and the market penetration of advanced melting and fining into the container glass industry yield a potential energy savings of 7.9 trillion Btu/yr by the year 2020.

  13. Rapid prototyping of energy management charging strategies

    Energy Technology Data Exchange (ETDEWEB)

    Ciulavu, Oana [Hella Electronics Romania, Timisoara (Romania); Starkmuth, Timo; Jesolowitz, Reinhard [Hella KGaA Hueck und Co., Lippstadt (Germany)

    2010-07-01

    This paper presents an approach to develop charging strategies to support a vehicle energy management aiming for the reduction of CO{sub 2} emissions and decreased fuel consumption by using the Hardware-in-the-loop (HIL) environment. (orig.)

  14. WIST: toolkit for rapid, customized LIMS development

    National Research Council Canada - National Science Library

    Huang, Y Wayne; Arkin, Adam P; Chandonia, John-Marc

    2011-01-01

    Workflow Information Storage Toolkit (WIST) is a set of application programming interfaces and web applications that allow for the rapid development of customized laboratory information management systems (LIMS...

  15. Alternative Energy Development and China's Energy Future

    Energy Technology Data Exchange (ETDEWEB)

    Zheng, Nina; Fridley, David

    2011-06-15

    In addition to promoting energy efficiency, China has actively pursued alternative energy development as a strategy to reduce its energy demand and carbon emissions. One area of particular focus has been to raise the share of alternative energy in China’s rapidly growing electricity generation with a 2020 target of 15% share of total primary energy. Over the last ten years, China has established several major renewable energy regulations along with programs and subsidies to encourage the growth of non-fossil alternative energy including solar, wind, nuclear, hydro, geothermal and biomass power as well as biofuels and coal alternatives. This study thus seeks to examine China’s alternative energy in terms of what has and will continue to drive alternative energy development in China as well as analyze in depth the growth potential and challenges facing each specific technology. This study found that despite recent policies enabling extraordinary capacity and investment growth, alternative energy technologies face constraints and barriers to growth. For relatively new technologies that have not achieved commercialization such as concentrated solar thermal, geothermal and biomass power, China faces technological limitations to expanding the scale of installed capacity. While some alternative technologies such as hydropower and coal alternatives have been slowed by uneven and often changing market and policy support, others such as wind and solar PV have encountered physical and institutional barriers to grid integration. Lastly, all alternative energy technologies face constraints in human resources and raw material resources including land and water, with some facing supply limitations in critical elements such as uranium for nuclear, neodymium for wind and rare earth metals for advanced solar PV. In light of China’s potential for and barriers to growth, the resource and energy requirement for alternative energy technologies were modeled and scenario analysis

  16. Practical implications of rapid development methodologies

    CSIR Research Space (South Africa)

    Gerber, A

    2007-11-01

    Full Text Available Rapid development methodologies are popular approaches for the development of modern software systems. The goals of these methodologies are the inclusion of the client into the analysis, design and implementation activities, as well...

  17. Solar energy emplacement developer

    Science.gov (United States)

    Mortensen, Michael; Sauls, Bob

    1991-01-01

    A preliminary design was developed for a Lunar Power System (LPS) composed of photovoltaic arrays and microwave reflectors fabricated from lunar materials. The LPS will collect solar energy on the surface of the Moon, transform it into microwave energy, and beam it back to Earth where it will be converted into usable energy. The Solar Energy Emplacement Developer (SEED) proposed will use a similar sort of solar energy collection and dispersement to power the systems that will construct the LPS.

  18. A rapid mitochondrial toxicity assay utilizing rapidly changing cell energy metabolism.

    Science.gov (United States)

    Sanuki, Yosuke; Araki, Tetsuro; Nakazono, Osamu; Tsurui, Kazuyuki

    2017-01-01

    Drug-induced liver injury is a major cause of safety-related drug-marketing withdrawals. Several drugs have been reported to disrupt mitochondrial function, resulting in hepatotoxicity. The development of a simple and effective in vitro assay to identify the potential for mitochondrial toxicity is thus desired to minimize the risk of causing hepatotoxicity and subsequent drug withdrawal. An in vitro test method called the "glucose-galactose" assay is often used in drug development but requires prior-culture of cells over several passages for mitochondrial adaptation, thereby restricting use of the assay. Here, we report a rapid version of this method with the same predictability as the original method. We found that replacing the glucose in the medium with galactose resulted in HepG2 cells immediately shifting their energy metabolism from glycolysis to oxidative phosphorylation due to drastic energy starvation; in addition, the intracellular concentration of ATP was reduced by mitotoxicants when glucose in the medium was replaced with galactose. Using our proposed rapid method, mitochondrial dysfunction in HepG2 cells can be evaluated by drug exposure for one hour without a pre-culture step. This rapid assay for mitochondrial toxicity may be more suitable for high-throughput screening than the original method at an early stage of drug development.

  19. Development of a Rapid Thermoplastic Impregnation Device

    NARCIS (Netherlands)

    Weustink, A.P.D.

    2007-01-01

    A melt impregnation device for rapid thermoplastic impregnation of fiber bundles has been developed through modeling and experiments. The basic principles behind the thermoplastic impregnation process are investigated and the properties needed for a successful thermoplastic impregnation device are

  20. Energy and development : A modelling approach

    NARCIS (Netherlands)

    van Ruijven, B.J.|info:eu-repo/dai/nl/304834521

    2008-01-01

    Rapid economic growth of developing countries like India and China implies that these countries become important actors in the global energy system. Examples of this impact are the present day oil shortages and rapidly increasing emissions of greenhouse gases. Global energy models are used explore

  1. New developments in rapidly solidified magnesium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Das, S.K. [Allied-Signal, Inc., Morristown, NJ (United States); Chang, C.F. [Allied-Signal, Inc., Morristown, NJ (United States); Raybould, D. [Allied-Signal, Inc., Morristown, NJ (United States); King, J.F. [Magnesium Elektron Ltd., Manchester (United Kingdom); Thistlethwaite, S. [Magnesium Elektron Ltd., Manchester (United Kingdom)

    1992-12-31

    In the present paper, we will examine the new developments in the rapidly solidified Mg-Al-Zn-Nd (EA55RS) alloy. We shall first briefly review the process scale-up currently employed for producing rapidly solidified magnesium alloys in large quantities, and then discuss the effect of billet size and processing parameters on the mechanical properties of various mill product forms such as extrusions and sheets. The superplastic behavior of EA55RS extrusions and rolled sheets are also discussed. Finally, some results on magnesium metal-matrix composites using rapidly solidified EA55RS matrix powders and SiC particulates are presented. (orig.)

  2. Energy access and sustainable development

    Science.gov (United States)

    Kammen, Daniel M.; Alstone, Peter; Gershenson, Dimitry

    2015-03-01

    With 1.4 billion people lacking electricity to light their homes and provide other basic services, or to conduct business, and all of humanity (and particularly the poor) are in need of a decarbonized energy system can close the energy access gap and protect the global climate system. With particular focus on addressing the energy needs of the underserved, we present an analytical framework informed by historical trends and contemporary technological, social, and institutional conditions that clarifies the heterogeneous continuum of centralized on-grid electricity, autonomous mini- or community grids, and distributed, individual energy services. We find that the current day is a unique moment of innovation in decentralized energy networks based on super-efficient end-use technology and low-cost photovoltaics, supported by rapidly spreading information technology, particularly mobile phones. Collectively these disruptive technology systems could rapidly increase energy access, contributing to meeting the Millennium Development Goals for quality of life, while simultaneously driving action towards low-carbon, Earth-sustaining, energy systems.

  3. Energy efficiency system development

    Science.gov (United States)

    Leman, A. M.; Rahman, K. A.; Chong, Haw Jie; Salleh, Mohd Najib Mohd; Yusof, M. Z. M.

    2017-09-01

    By subjecting to the massive usage of electrical energy in Malaysia, energy efficiency is now one of the key areas of focus in climate change mitigation. This paper focuses on the development of an energy efficiency system of household electrical appliances for residential areas. Distribution of Questionnaires and pay a visit to few selected residential areas are conducted during the fulfilment of the project as well as some advice on how to save energy are shared with the participants. Based on the collected data, the system developed by the UTHM Energy Team is then evaluated from the aspect of the consumers' behaviour in using electrical appliances and the potential reduction targeted by the team. By the end of the project, 60% of the participants had successfully reduced the electrical power consumption set by the UTHM Energy Team. The reasons for whether the success and the failure is further analysed in this project.

  4. Toward a mechanistic understanding of human-induced rapid environmental change: A case study linking energy development, avian nest predation, and predators

    Science.gov (United States)

    Hethcoat, Matthew G.; Chalfoun, Anna D.

    2015-01-01

    Demographic consequences of human-induced rapid environmental change (HIREC) have been widely documented for many populations. The mechanisms underlying such patterns, however, are rarely investigated and yet are critical to understand for effective conservation and management.

  5. Hydrothermal energy development projects

    Science.gov (United States)

    Dibello, E. G.

    The development of hydrothermal energy for direct heat applications is being accelerated by twenty-two demonstration projects that are funded on a cost sharing basis by the US Department of Energy, Division of Geothermal Energy. These projects are designed to demonstrate the technical and economic feasibility of the direct use of hydrothermal resources in the United States. Engineering and economic data for the projects are summarized. The data and experience being generated by these projects will serve as an important basis for future direct heat development.

  6. Energy, sustainability and development

    Energy Technology Data Exchange (ETDEWEB)

    Llewellyn Smith, Ch

    2006-07-01

    The author discusses in a first part the urgent need to reduce energy use (or at least curb growth) and seek cleaner ways of producing energy on a large scale. He proposes in a second part what must be done: introduce fiscal measures and regulation to change behavior of consumers, provide incentives to encourage the market to expand use of low carbon technologies, stimulate research and development by industry and develop the renewable energies sources. In a last part he looks what part can fusion play. (A.L.B.)

  7. Development and tendency of rapid prototyping technology

    Science.gov (United States)

    Yan, Yongnian; Hong, Guodong

    1998-08-01

    The definition of the rapid prototyping is given in this paper. Various RP processes, which build the prototypes with 2.5 or 3 dimensional layers, are introduced. The relative techniques of RP and the differences between RP technique and CNC manufacturing are analyzed. The paper discusses the RP's applied fields and methods and presents the RP development in the world. According to the idea that requirements determine the developing, the RP's tendency is discussed.

  8. Energy, Equity, and Agricultural Development

    OpenAIRE

    Tyner, Wallace E.; Hrabovszky, Janos P.

    1983-01-01

    Energy is intricately related to agricultural production. Plants capture solar energy and convert it into food, energy, and other products useful for mankind. Agriculture is potentially a source of not only food, feed, and fibre, but also of energy. Agriculture is also an important user of energy. Technical progress in agriculture has meant more intensive use of commercial energy in agriculture. The rapid escalation of energy prices in the 1970s has important efficiency and equity implication...

  9. Renewable energy project development

    Energy Technology Data Exchange (ETDEWEB)

    Ohi, J.

    1996-12-31

    The author presents this paper with three main thrusts. The first is to discuss the implementation of renewable energy options in China, the second is to identify the key project development steps necessary to implement such programs, and finally is to develop recommendations in the form of key issues which must be addressed in developing such a program, and key technical assistance needs which must be addressed to make such a program practical.

  10. Energy Efficiency Project Development

    Energy Technology Data Exchange (ETDEWEB)

    IUEP

    2004-03-01

    The International Utility Efficiency Partnerships, Inc. (IUEP) has been a leader among the industry groups that have supported voluntary initiatives to promote international energy efficiency projects and address global climate change. The IUEP maintains its leadership by both supporting international greenhouse gas (GHG) reduction projects under the auspices of the U.S. Department of Energy (DOE) and by partnering with U.S. and international organizations to develop and implement strategies and specific energy efficiency projects. The goals of the IUEP program are to (1) provide a way for U.S. industry to maintain a leadership role in international energy efficiency infrastructure projects; (2) identify international energy project development opportunities to continue its leadership in supporting voluntary market-based mechanisms to reduce GHG emissions; and (3) demonstrate private sector commitment to voluntary approaches to global climate issues. The IUEP is dedicated to identifying, promoting, managing, and assisting in the registration of international energy efficiency projects that result in demonstrated voluntary reductions of GHG emissions. This Final Technical Report summarizes the IUEP's work in identifying, promoting, managing, and assisting in development of these projects and IUEP's effort in creating international cooperative partnerships to support project development activities that develop and deploy technologies that (1) increase efficiency in the production, delivery and use of energy; (2) increase the use of cleaner, low-carbon fuels in processing products; and (3) capture/sequester carbon gases from energy systems. Through international cooperative efforts, the IUEP intends to strengthen partnerships for energy technology innovation and demonstration projects capable of providing cleaner energy in a cost-effective manner. As detailed in this report, the IUEP met program objectives and goals during the reporting period January 1

  11. Energy considerations in accelerating rapid shear granular flows

    Directory of Open Access Journals (Sweden)

    S. P. Pudasaini

    2009-05-01

    Full Text Available We present a complete expression for the total energy associated with a rapid frictional granular shear flow down an inclined surface. This expression reduces to the often used energy for a non-accelerating flow of an isotropic, ideal fluid in a horizontal channel, or to the energy for a vertically falling mass. We utilize thickness-averaged mass and momentum conservation laws written in a slope-defined coordinate system. Both the enhanced gravity and friction are taken into account in addition to the bulk motion and deformation. The total energy of the flow at a given spatial position and time is defined as the sum of four energy components: the kinetic energy, gravity, pressure and the friction energy. Total energy is conserved for stationary flow, but for non-stationary flow the non-conservative force induced by the free-surface gradient means that energy is not conserved. Simulations and experimental results are used to sketch the total energy of non-stationary flows. Comparison between the total energy and the sum of the kinetic and pressure energy shows that the contribution due to gravity acceleration and frictional resistance can be of the same order of magnitude, and that the geometric deformation plays an important role in the total energy budget of the cascading mass. Relative importance of the different constituents in the total energy expression is explored. We also introduce an extended Froude number that takes into account the apparent potential energy induced by gravity and pressure.

  12. YAM- A Framework for Rapid Software Development

    Science.gov (United States)

    Jain, Abhinandan; Biesiadecki, Jeffrey

    2006-01-01

    YAM is a software development framework with tools for facilitating the rapid development and integration of software in a concurrent software development environment. YAM provides solutions for thorny development challenges associated with software reuse, managing multiple software configurations, the development of software product-lines, multiple platform development and build management. YAM uses release-early, release-often development cycles to allow developers to incrementally integrate their changes into the system on a continual basis. YAM facilitates the creation and merging of branches to support the isolated development of immature software to avoid impacting the stability of the development effort. YAM uses modules and packages to organize and share software across multiple software products. It uses the concepts of link and work modules to reduce sandbox setup times even when the code-base is large. One side-benefit is the enforcement of a strong module-level encapsulation of a module s functionality and interface. This increases design transparency, system stability as well as software reuse. YAM is in use by several mid-size software development teams including ones developing mission-critical software.

  13. Renewable energy development in China

    Energy Technology Data Exchange (ETDEWEB)

    Junfeng, Li

    1996-12-31

    This paper presents the resources availability, technologies development and their costs of renewable energies in China and introduces the programs of renewable energies technologies development and their adaptation for rural economic development in China. As the conclusion of this paper, renewable energies technologies are suitable for some rural areas, especially in the remote areas for both household energy and business activities energy demand. The paper looks at issues involving hydropower, wind energy, biomass combustion, geothermal energy, and solar energy.

  14. Wind energy technology developments

    DEFF Research Database (Denmark)

    Madsen, Peter Hauge; Hansen, Morten Hartvig; Pedersen, Niels Leergaard

    2014-01-01

    This chapter describes the present mainstream development of the wind turbine technology at present. The turbine technology development trend is characterized by up-scaling to turbines with larger capacity for both onshore and offshore applications, larger rotors and new drivetrain solution...... turbine blades and towers are very large series-produced components, which costs and quality are strongly dependent on the manufacturing methods. The industrial wind energy sector is well developed in Denmark, and the competitive advantage of the Danish sector and the potential for job creation...

  15. Energy efficiency, renewable energy and sustainable development

    Energy Technology Data Exchange (ETDEWEB)

    Ervin, C.A.

    1994-12-31

    The Office of Energy Efficiency and Renewable Energy (EE) is part of the U.S. Department of Energy that is specifically charged with encouraging the more efficient use of energy resources, and the use of renewable energy resources - such as solar power, wind power, biomass energy and geothermal energy. In the past several years, EE has increased its emphasis on technology deployment through partnerships with states, local governments and private companies. Partnerships move new discoveries more quickly into the marketplace, where they can create jobs, prevent pollution, save resources, and produce many other benefits. The author then emphasizes the importance of this effort in a number of different sections of the paper: energy consumption pervades everything we do; U.S. energy imports are rising to record levels; transportation energy demand is increasing; U.S. energy use is increasing; population growth increases world energy demand; total costs of energy consumption aren`t always counted; world energy markets offer incredible potential; cost of renewables is decreasing; clean energy is essential to sustainable development; sustainable energy policy; sustainable energy initiatives: utilities, buildings, and transportation.

  16. Rural energy and development

    Energy Technology Data Exchange (ETDEWEB)

    Stern, R.

    1997-12-01

    The author discusses the worldwide problem and need for rural electrification to support development. He points out that rural areas will pay high rates to receive such services, but cannot afford the capital cost for conventional services. The author looks at this problem from the point of energy choices, subsides, initial costs, financing, investors, local involvement, and governmental actions. In particular he is concerned with ways to make better use of biofuels, to promote sustainable harvesting, and to encourage development of more modern fuels.

  17. Energy development and Environmental Constraints in China

    Energy Technology Data Exchange (ETDEWEB)

    Gan, Lin

    1997-12-31

    This report analyses the interrelationship between energy development and environmental constraints in China. It examines the effects of economic development, investment, energy trade and environmental limitations in shaping energy development. It highlights the tensions between institutions involved in energy development, energy conservation and environmental protection. It concludes that total fuel mix in China will be diversified in the future. The share of coal in primary energy production and consumption will increase in the short time span till 2020 and then gradually diminish, to be replaced essentially by gas, nuclear energy and renewable energy sources. China will become a big oil importer because of increased demand and limited resources. Meanwhile, coal export will increase. The emissions of carbon dioxide and sulfur dioxide may increase in the future because of the rapid economic growth and lack of effective control measures. Institutional bottlenecks, and political preference to solving local environmental problems, will affect actions to eliminate global environmental risks. There are huge investment potentials for energy development both from international and domestic private investment funds. Energy efficiency will continue to improve along with a gradual decline of non-commercial energy use and increasing share of commercial energy in final consumption. Energy conservation holds the key to sustainable energy development that should be promoted at the national and local levels with demand management as a focus in policy implementation. 25 refs., 5 figs., 2 tabs.

  18. Bolivia renewable energy development

    Energy Technology Data Exchange (ETDEWEB)

    Smith, P.

    1997-12-01

    The author summarizes changes which have occurred in Bolivia in the past year which have had an impact on renewable energy source development. Political changes have included the privatization of power generation and power distribution, and resulted in a new role for state level government and participation by the individual. A National Rural Electrification Plan was adopted in 1996, which stresses the use of GIS analysis and emphasizes factors such as off grid, economic index, population density, maintenance risk, and local organizational structure. The USAID program has chosen to stress economic development, environmental programs, and health over village power programs. The national renewables program has adopted a new development direction, with state projects, geothermal projects, and private sector involvement stressed.

  19. Energy, Sustainability and Development

    CERN Multimedia

    CERN. Geneva

    2008-01-01

    A huge increase in energy use is expected in the coming decades – see the IEA’s ‘business as usual’/reference scenario below. While developed countries could use less energy, a large increase is needed to lift billions out of poverty, including over 25% of the world’s population who still lack electricity. Meeting demand in an environmentally responsible manner will be a huge challenge. The World Bank estimates that coal pollution leads to 300,000 deaths in China each year, while smoke from cooking and heating with biomass kills 1.3 million world-wide – more than malaria. The IEA’s alternative scenario requires a smaller increase in energy use than the reference scenario and is also less carbon intensive, but it still implies that CO2 emissions will increase 30% by 2030 (compared to 55% in the reference scenario). Frighteningly, implementing the alternative scenario faces “formidable hurdles” according to the IEA, despite the fact that it would yield financial savings for consumers that...

  20. A new rapid method for rockfall energies and distances estimation

    Science.gov (United States)

    Giacomini, Anna; Ferrari, Federica; Thoeni, Klaus; Lambert, Cedric

    2016-04-01

    Rockfalls are characterized by long travel distances and significant energies. Over the last decades, three main methods have been proposed in the literature to assess the rockfall runout: empirical, process-based and GIS-based methods (Dorren, 2003). Process-based methods take into account the physics of rockfall by simulating the motion of a falling rock along a slope and they are generally based on a probabilistic rockfall modelling approach that allows for taking into account the uncertainties associated with the rockfall phenomenon. Their application has the advantage of evaluating the energies, bounce heights and distances along the path of a falling block, hence providing valuable information for the design of mitigation measures (Agliardi et al., 2009), however, the implementation of rockfall simulations can be time-consuming and data-demanding. This work focuses on the development of a new methodology for estimating the expected kinetic energies and distances of the first impact at the base of a rock cliff, subject to the conditions that the geometry of the cliff and the properties of the representative block are known. The method is based on an extensive two-dimensional sensitivity analysis, conducted by means of kinematic simulations based on probabilistic modelling of two-dimensional rockfall trajectories (Ferrari et al., 2016). To take into account for the uncertainty associated with the estimation of the input parameters, the study was based on 78400 rockfall scenarios performed by systematically varying the input parameters that are likely to affect the block trajectory, its energy and distance at the base of the rock wall. The variation of the geometry of the rock cliff (in terms of height and slope angle), the roughness of the rock surface and the properties of the outcropping material were considered. A simplified and idealized rock wall geometry was adopted. The analysis of the results allowed finding empirical laws that relate impact energies

  1. Rapid Application Development with OpenStudio: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Weaver, E.; Long, N.; Fleming, K.; Schott, M.; Benne, K.; Hale, E.

    2012-05-01

    This paper presents several case studies of rapidly implemented, audience-specific applications for whole building energy modeling and standards analysis. By tailoring each application to the audience and the task at hand, the required learning curve for new users was greatly reduced. Each case study used OpenStudio, the U.S. Department of Energy's middleware software development kit (SDK). OpenStudio provides an easy interface to the EnergyPlus whole building simulation engine, while extending its capability and providing higher-level functionality such as software interoperability, standards, analysis, and optimization. Each case study is unique in the technology employed to interface with OpenStudio as well as the methods used for user interaction and data presentation. Four case studies are presented.

  2. Thermophotovoltaic Energy Conversion Development Program

    Science.gov (United States)

    Shukla, Kailash; Doyle, Edward; Becker, Frederick

    1998-01-01

    Completely integrated thermophotovoltaic (TPV) power sources in the range of 100 to 500 watts are being developed. The technical approach taken in this project focuses on optimizing the integrated performance of the primary subsystems in order to yield high energy conversion efficiency and cost effectiveness. An important aspect of the approach is the use of a narrow band fibrous emitter radiating to a bandgap matched photovoltaic array to minimize thermal and optical recuperation requirements, as well as the non-recoverable heat losses. For the prototype system, fibrous ytterbia emitters radiating in a narrow band centered at 980 nm are matched with high efficiency silicon photoconverters. The integrated system includes a dielectric stack filter for optical energy recovery and a ceramic recuperator for thermal energy recovery. The prototype TPV system uses a rapid mix distributed fuel delivery system with controlled feeding of the fuel and heated air into a flame at the surface of the emitter. This makes it possible to operate at air preheat temperatures well above the auto-ignition temperature of the fuel thereby substantially increasing the system efficiency. The system has been operated with air preheat temperatures up to 1367 K and has produced a uniform narrow band radiation over the surface of the emitter with this approach. The design of the system is described and test data for the system and some of the key components are presented. The results from a system model, which show the impact of various parameters on system performance, are also discussed.

  3. Rapid Energy Estimation for Hardware-Software Codesign Using FPGAs

    Directory of Open Access Journals (Sweden)

    Prasanna ViktorK

    2006-01-01

    Full Text Available By allowing parts of the applications to be executed either on soft processors (as software programs or on customized hardware peripherals attached to the processors, FPGAs have made traditional energy estimation techniques inefficient for evaluating various design tradeoffs. In this paper, we propose a high-level simulation-based two-step rapid energy estimation technique for hardware-software codesign using FPGAs. In the first step, a high-level hardware-software cosimulation technique is applied to simulate both the hardware and software components of the target application. High-level simulation results of both software programs running on the processors and the customized hardware peripherals are gathered during the cosimulation process. In the second step, the high-level simulation results of the customized hardware peripherals are used to estimate the switching activities of their corresponding register-transfer/gate level ("low-level" implementations. We use this information to employ an instruction-level energy estimation technique and a domain-specific energy performance modeling technique to estimate the energy dissipation of the complete application. A Matlab/Simulink-based implementation of our approach and two numerical computation applications show that the proposed energy estimation technique can achieve more than 6000x speedup over low-level simulation-based techniques while sacrificing less than 10% estimation accuracy. Compared with the measured results, our experimental results show that the proposed technique achieves an average estimation error of less than 12%.

  4. Strategies for Sustainable Energy Development

    DEFF Research Database (Denmark)

    Meyer, Niels I

    2009-01-01

    The paper analyses international strategies for establishing a sustainable energy development. Proposals are given for mitigation of global warming.......The paper analyses international strategies for establishing a sustainable energy development. Proposals are given for mitigation of global warming....

  5. Development Trends of World Energy

    OpenAIRE

    Hu, Yuetong

    2009-01-01

    Energy has been one of the most important issues and challenge humans face in the 21st century which has a bearing on international economic and social development, global climate changes and environment protection. With a focus on development trends of world energy, this paper analyses the current world energy status and from the perspectives of energy sources, regions, end-use sectors, the balance of energy production and consumption, and in the context of its implications on the global env...

  6. Rapid Energy Estimation for Hardware-Software Codesign Using FPGAs

    Directory of Open Access Journals (Sweden)

    Viktor K. Prasanna

    2006-09-01

    Full Text Available By allowing parts of the applications to be executed either on soft processors (as software programs or on customized hardware peripherals attached to the processors, FPGAs have made traditional energy estimation techniques inefficient for evaluating various design tradeoffs. In this paper, we propose a high-level simulation-based two-step rapid energy estimation technique for hardware-software codesign using FPGAs. In the first step, a high-level hardware-software cosimulation technique is applied to simulate both the hardware and software components of the target application. High-level simulation results of both software programs running on the processors and the customized hardware peripherals are gathered during the cosimulation process. In the second step, the high-level simulation results of the customized hardware peripherals are used to estimate the switching activities of their corresponding register-transfer/gate level (“low-level” implementations. We use this information to employ an instruction-level energy estimation technique and a domain-specific energy performance modeling technique to estimate the energy dissipation of the complete application. A Matlab/Simulink-based implementation of our approach and two numerical computation applications show that the proposed energy estimation technique can achieve more than 6000x speedup over low-level simulation-based techniques while sacrificing less than 10% estimation accuracy. Compared with the measured results, our experimental results show that the proposed technique achieves an average estimation error of less than 12%.

  7. Wind Energy Workforce Development & Jobs

    Energy Technology Data Exchange (ETDEWEB)

    Tegen, Suzanne

    2016-11-08

    The United States needs a skilled and qualified wind energy workforce to produce domestic clean power. To assist with wind energy workforce development, the U.S. Department of Energy (DOE) and National Renewable Energy Laboratory are engaged with several efforts.This presentation by Suzanne Tegen describes these efforts, including a wind industry survey, DOE's Wind Career Map, the DOE Wind Vision report, and an in-depth discussion of the Jobs & Economic Development Impacts Model.

  8. The challenges of rapid urbanization on sustainable development of ...

    African Journals Online (AJOL)

    The study examines the challenges of rapid urbanization on the sustainable development of Nyanya, Abuja. An interesting finding of the study is that the primary factor for the rapid urbanization of Nyanya within a short period of time is migration. The consequence of this rapid urbanization and population rise within a short ...

  9. A Microelectromechanical High-Density Energy Storage/Rapid Release System

    Energy Technology Data Exchange (ETDEWEB)

    Rodgers, M. Steven; Allen, Jim J.; Meeks, Kent D.; Jensen, Brian D.; Miller, Sam L.

    1999-07-21

    One highly desirable characteristic of electrostatically driven microelectromechanical systems (MEMS) is that they consume very little power. The corresponding drawback is that the force they produce may be inadequate for many applications. It has previously been demonstrated that gear reduction units or microtransmissions can substantially increase the torque generated by microengines. Operating speed, however, is also reduced by the transmission gear ratio. Some applications require both high speed and high force. If this output is only required for a limited period of time, then energy could be stored in a mechanical system and rapidly released upon demand. We have designed, fabricated, and demonstrated a high-density energy storage/rapid release system that accomplishes this task. Built using a 5-level surface micromachining technology, the assembly closely resembles a medieval crossbow. Energy releases on the order of tens of nanojoules have already been demonstrated, and significantly higher energy systems are under development.

  10. Offshore wind energy developments

    OpenAIRE

    Stolpe, Mathias; Buhl, Thomas; Sumer, B. Mutlu; Kiil, Søren; Holbøll, Joachim; Piirainen, Kalle

    2014-01-01

    This chapter will give a brief overview of a few of the activities within offshore wind energy research, specifically 1) Support structure optimization, 2) Blade coatings for wind turbines; 3) Scour protection of foundations, 4) Offshore HVDC and 5) Offshore wind services.

  11. Offshore wind energy developments

    DEFF Research Database (Denmark)

    Stolpe, Mathias; Buhl, Thomas; Sumer, B. Mutlu

    2014-01-01

    This chapter will give a brief overview of a few of the activities within offshore wind energy research, specifically 1) Support structure optimization, 2) Blade coatings for wind turbines; 3) Scour protection of foundations, 4) Offshore HVDC and 5) Offshore wind services....

  12. Business development in renewable energy

    NARCIS (Netherlands)

    Krozer, Yoram; Visa, Ion

    2014-01-01

    This paper discusses how to foster development of renewable energy business. Factors that impede or enhance renewable energy in the EU 27 member states in the period 1998–2008 are analyzed. Nine factors are considered: population density, production output and energy sector output to indicate market

  13. Developments in high energy theory

    Indian Academy of Sciences (India)

    It provides a panoramic view of the main theoretical developments in high energy physics since its inception more than half a century ago, a period in which experiments have spanned an enormous range of energies, theories have been developed leading up to the Standard Model, and proposals – including the radical ...

  14. [Rapid development of cosmetic medicine in China].

    Science.gov (United States)

    Lu, Kaihua; Pan, Baohua; Xia, Wei

    2006-04-01

    To review and summarize the development during the last 20 years and the current status of cosmetic medicine, i.e., cosmetic surgery, in China, for the healthier development of this specialty in the future. Literature concerned was reviewed, including conference abstracts, papers, and publications, and the present status and problems were analyzed. Cosmetic medicine was recognized as an independent specialty and gained its clear definition. The development of cosmetic medicine is an inevitable trend of the changing medical modules and the developing science and civilization. This trend fulfilled the need of the people. The related problems consisted of a high complication rate, confusion of management, and insufficient specific knowledge in part of the providers. The development of cosmetic medicine is an inevitable trend of the civilization development. For the healthy development of this specialty, scientific management and systemic education for the providers are crucial. Only those who have the plastic surgery background are able to participate in this practice.

  15. Modular Infrastructure for Rapid Flight Software Development

    Science.gov (United States)

    Pires, Craig

    2010-01-01

    This slide presentation reviews the use of modular infrastructure to assist in the development of flight software. A feature of this program is the use of model based approach for application unique software. A review of two programs that this approach was use on are: the development of software for Hover Test Vehicle (HTV), and Lunar Atmosphere and Dust Environment Experiment (LADEE).

  16. Rapid Development of Intestinal Type Gastric Adenocarcinoma

    Directory of Open Access Journals (Sweden)

    Young S. Oh

    2011-04-01

    Full Text Available Intestinal type gastric adenocarcinoma is felt to develop over a protracted time period through a series of defined steps. Several potential risk factors for the development of gastric cancer have been identified, including a family history of gastric cancer and Helicobacter pylori infection. We present the case of a patient with neither risk factor who progressed in a 14 month time frame from histologically normal gastric mucosa to early stage intestinal type gastric adenocarcinoma in the setting of diffuse gastric intestinal metaplasia and atrophic gastritis. This patient’s presentation conflicts with our current understanding of the development of intestinal type gastric adenocarcinoma.

  17. Offshore Wind Energy Systems Engineering Curriculum Development

    Energy Technology Data Exchange (ETDEWEB)

    McGowan, Jon G. [Univ. of Massachusetts, Amherst, MA (United States); Manwell, James F. [Univ. of Massachusetts, Amherst, MA (United States); Lackner, Matthew A. [Univ. of Massachusetts, Amherst, MA (United States)

    2012-12-31

    Utility-scale electricity produced from offshore wind farms has the potential to contribute significantly to the energy production of the United States. In order for the U.S. to rapidly develop these abundant resources, knowledgeable scientists and engineers with sound understanding of offshore wind energy systems are critical. This report summarizes the development of an upper-level engineering course in "Offshore Wind Energy Systems Engineering." This course is designed to provide students with a comprehensive knowledge of both the technical challenges of offshore wind energy and the practical regulatory, permitting, and planning aspects of developing offshore wind farms in the U.S. This course was offered on a pilot basis in 2011 at the University of Massachusetts and the National Renewable Energy Laboratory (NREL), TU Delft, and GL Garrad Hassan have reviewed its content. As summarized in this report, the course consists of 17 separate topic areas emphasizing appropriate engineering fundamentals as well as development, planning, and regulatory issues. In addition to the course summary, the report gives the details of a public Internet site where references and related course material can be obtained. This course will fill a pressing need for the education and training of the U.S. workforce in this critically important area. Fundamentally, this course will be unique due to two attributes: an emphasis on the engineering and technical aspects of offshore wind energy systems, and a focus on offshore wind energy issues specific to the United States.

  18. Modeling Transitions To Renewable Energy In Developing Countries

    NARCIS (Netherlands)

    Urban, F.; Moll, H.C.; Benders, R.M.J.

    2006-01-01

    As a growing share of the future world population is expected to live in developing countries and as rapidly developing countries will soon be amongst the world’s hugest consumers of energy, it is essential to acknowledge the increasing influence of the developing world on the global energy future.

  19. Renewable energy development in China: policies, practices and performance

    NARCIS (Netherlands)

    Han, Jingyi

    2009-01-01

    Energy demand in China has risen rapidly, driven by its massive economic growth. Meanwhile, the energy system in China heavily depends on fossil fuels, which causes serious problems of climate change and air pollution. China started to develop renewable energy about 30 years ago, aiming to alleviate

  20. [The rapid development of child neuropsychology].

    Science.gov (United States)

    Billard, C; Jambaqué, I

    2008-05-01

    The past few years have seen important progress and new developments in the field of child neuropsychology. Children can exhibit acquired or learning disorders, but in all cases such deficits take place in a developmental trajectory that requires taking into account cerebral maturation and plasticity processes. Child neuropsychology finds its specificity in the perspective of developmental neuropsychology and has close connections with health and education. This article focuses on two pathologies - childhood epilepsies and developmental dyslexia - that highlight the recent progress in this specialty and its perspectives.

  1. Developing and validating rapid assessment instruments

    CERN Document Server

    Abell, Neil; Kamata, Akihito

    2009-01-01

    This book provides an overview of scale and test development. From conceptualization through design, data collection, analysis, and interpretation, critical concerns are identified and grounded in the increasingly sophisticated psychometric literature. Measurement within the health, social, and behavioral sciences is addressed, and technical and practical guidance is provided. Acknowledging the increasingly sophisticated contributions in social work, psychology, education, nursing, and medicine, the book balances condensation of complex conceptual challenges with focused recommendations for conceiving, planning, and implementing psychometric study. Primary points are carefully referenced and consistently illustrated to illuminate complicated or abstract principles. Basics of construct conceptualization and establishing evidence of validity are complimented with introductions to concept mapping and cross-cultural translation. In-depth discussion of cutting edge topics like bias and invariance in item responses...

  2. Wind Energy Career Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Gwen Andersen

    2012-03-29

    Saint Francis University has developed curriculum in engineering and in business that is meeting the needs of students and employers (Task 1) as well as integrating wind energy throughout the curriculum. Through a variety of approaches, the University engaged in public outreach and education that reached over 2,000 people annually (Task 2). We have demonstrated, through the success of these programs, that students are eager to prepare for emerging jobs in alternative energy, that employers are willing to assist in developing employees who understand the broader business and policy context of the industry, and that people want to learn about wind energy.

  3. Environmental boundaries to energy development

    Energy Technology Data Exchange (ETDEWEB)

    Trivelpiece, A.W.

    1989-01-01

    Public concern about the environment, health and safety consequences of energy technology has been growing steadily for more than two decades in the United States. This concern forms an important boundary condition as the United States seeks to develop a new National Energy Strategy. Furthermore, the international aspects of the energy/environment interface such as acid rain global climate change and stratospheric ozone depletion are very prominent in US thinking. In fact, the energy systems of the world are becoming more closely coupled environmentally and otherwise. Now where is this coupling more important than that between the industrialized and developing world; the choices made by each will have profound effects on the other. The development of energy technologies compatible with both economic growth and improving and sustaining environmental quality represents a major R D challenge to the US and USSR. Decision about adoption of new technology and R D priorities can be improved by better measurements of how energy sources and uses are changing throughout the world and better methods to project the potential consequences of these decisions. Such projection require understanding relative risks of alternating existing and evolving technologies. All of these R D areas, technology improvement energy system monitoring and projection and comparative risk assessment are the topics of this seminar. Progress in each may be enhanced by collaboration and cooperation between our two countries. 7 refs., 27 figs., 5 tabs.

  4. Developing Government Renewable Energy Projects

    Energy Technology Data Exchange (ETDEWEB)

    Kurt S. Myers; Thomas L. Baldwin; Jason W. Bush; Jake P. Gentle

    2012-07-01

    The US Army Corps of Engineers has retained Idaho National Laboratory (INL) to conduct a study of past INL experiences and complete a report that identifies the processes that are needed for the development of renewable energy projects on government properties. The INL has always maintained expertise in power systems and applied engineering and INL’s renewable energy experiences date back to the 1980’s when our engineers began performing US Air Force wind energy feasibility studies and development projects. Over the last 20+ years of working with Department of Defense and other government agencies to study, design, and build government renewable projects, INL has experienced the do’s and don’ts for being successful with a project. These compiled guidelines for government renewable energy projects could include wind, hydro, geothermal, solar, biomass, or a variety of hybrid systems; however, for the purpose of narrowing the focus of this report, wind projects are the main topic discussed throughout this report. It is our thought that a lot of what is discussed could be applied, possibly with some modifications, to other areas of renewable energy. It is also important to note that individual projects (regardless the type) vary to some degree depending on location, size, and need but in general these concepts and directions can be carried over to the majority of government renewable energy projects. This report focuses on the initial development that needs to occur for any project to be a successful government renewable energy project.

  5. The reasons for the rapid development of human technologies

    OpenAIRE

    Macfarlane, Alan

    2004-01-01

    While playing with a two-year-old girl in Australia, Alan Macfarlane explains one reason for the rapid development of humans, namely their curiosity and desire to experiment and to imagine and make new things.

  6. North Dakota Energy Workforce Development

    Energy Technology Data Exchange (ETDEWEB)

    Carter, Drake [Bismarck State College, Bismarck, ND (United States)

    2014-12-29

    Bismarck State College, along with its partners (Williston State College, Minot State University and Dickinson State University), received funding to help address the labor and social impacts of rapid oilfield development in the Williston Basin of western North Dakota. Funding was used to develop and support both credit and non-credit workforce training as well as four major symposia designed to inform and educate the public; enhance communication and sense of partnership among citizens, local community leaders and industry; and identify and plan to ameliorate negative impacts of oil field development.

  7. Trends in Wind Energy Technology Development

    DEFF Research Database (Denmark)

    Rasmussen, Flemming; Madsen, Peter Hauge; Tande, John O.

    2011-01-01

    . The development of new and larger turbines to some extent stagnated, and costs even rose due to high demand and rising materials costs. We believe, however – and this is supported by recent trends – that the next decade will be a new period of technology development and further scale-up, leading to more cost......-effective, reliable and controllable wind turbines and new applications. This is partly due to increased international competition, but also because the industry is increasingly dominated by high-technology international companies. The move to install more capacity offshore also favours larger wind turbines....... The huge potential of wind, the rapid development of the technology and the impressive growth of the industry justify the perception that wind energy is changing its role to become the future backbone of a secure global energy supply. Between the mid-1980s, when the wind industry took off, and 2005 wind...

  8. Energy Development Opportunities for Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    Larry Demick

    2012-11-01

    The Wyoming Business Council, representing the state’s interests, is participating in a collaborative evaluation of energy development opportunities with the NGNP Industry Alliance (an industry consortium), the University of Wyoming, and the US Department of Energy’s Idaho National Laboratory. Three important energy-related goals are being pursued by the State of Wyoming: Ensuring continued reliable and affordable sources of energy for Wyoming’s industries and people Restructuring the coal economy in Wyoming Restructuring the natural gas economy in Wyoming

  9. The role of energy efficiency in the development of the Iranian energy system energy scenario analysis

    Energy Technology Data Exchange (ETDEWEB)

    Supersberger, Nikolaus; Lechtenboehmer, Stefan (Wuppertal Inst. for Climate, Environment and Energy, Wuppertal (Germany)); Seifried, Dieter (Buero Oe-Quadrat, Freiburg (Germany)); Moshiri, Saeed (Dept. of Economics, Univ. of Manitoba (Canada))

    2009-07-01

    Iran is one of the largest oil producers and natural gas owners globally. However, it has to struggle with domestic energy shortages, economic losses through energy subsidisation and inefficient energy infrastructures. Furthermore, GHG and other energy related emissions are rapidly increasing and posing a growing threat to local environment as well as global climate. With current trends prevailing, Iran may even become a net energy importer over the next decades. Resource allocation is therefore a crucial challenge for Iran: domestic consumption stands versus exports of energy. The energy transformation sector clarifies Iran's dilemma: soaring electricity demand leads to blackouts, and power plant new builds are far from using most efficient technologies (e. g. CHP), therefore keeping energy intensive structures. But fossil fuels could be sold on international markets if spared by having more efficient energy infrastructures. As shown by the high energy intensity of its economy, Iran has large potentials for energy saving and efficiency. In order to highlight and better identify this potential the paper contrasts a high efficiency scenario in all sectors of energy transformation and consumption with a possible 'business as usual' development. Using a bottom-up approach, the analysis provides a sector-by-sector perspective on energy saving potentials. These can be utilised on the demand side especially in the transport sector (fuels) and in households (electricity for appliances, natural gas for heating). Electricity generation bears efficiency potentials as well. We conclude that Iran, but also the international community, would benefit on various levels from a more energy-efficient Iranian economy: Energy exports could increase, generating more foreign currency and reducing the pressures on international oil and gas prices; energy consumption would decrease, leading to lower needs for nuclear energy and for subsidies to Iranian people, as well as to

  10. Surge in the heating market. Renewable energies rapidly gaining market share; Wende im Waermemarkt. Erneuerbare Energien gewinnen rasant an Marktanteilen

    Energy Technology Data Exchange (ETDEWEB)

    Briese, Dirk; Hein, Thomas; Gatena, Jens [trend:research GmbH Institut fuer Trend- und Marktforschung, Bremen (Germany)

    2009-10-15

    The proportion of heat produced from renewable energies is rapidly growing in Germany. The main reasons for this dynamic development are governmental funds for heating technologies based on renewable energy, the growing importance attached by large parts of the population to environmentally responsible energy production and the rising costs of fossil fuels. Biomass plants, solar thermal installations and heat pumps will be widely used in upcoming refurbishment and new building projects, as a recent study shows.

  11. Development and implementation of a rapid real-time polymerase ...

    African Journals Online (AJOL)

    Assays which use real-time polymerase chain reaction (PCR) technology can be developed for the rapid identification of genetic sequences carried by waterborne pathogens. Rand Water has established facilities within which a selection of PCR assays will be developed. This paper reports on the optimisation and ...

  12. Arctic Energy Technology Development Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Sukumar Bandopadhyay; Charles Chamberlin; Robert Chaney; Gang Chen; Godwin Chukwu; James Clough; Steve Colt; Anthony Covescek; Robert Crosby; Abhijit Dandekar; Paul Decker; Brandon Galloway; Rajive Ganguli; Catherine Hanks; Rich Haut; Kristie Hilton; Larry Hinzman; Gwen Holdman; Kristie Holland; Robert Hunter; Ron Johnson; Thomas Johnson; Doug Kame; Mikhail Kaneveskly; Tristan Kenny; Santanu Khataniar; Abhijeet Kulkami; Peter Lehman; Mary Beth Leigh; Jenn-Tai Liang; Michael Lilly; Chuen-Sen Lin; Paul Martin; Pete McGrail; Dan Miller; Debasmita Misra; Nagendra Nagabhushana; David Ogbe; Amanda Osborne; Antoinette Owen; Sharish Patil; Rocky Reifenstuhl; Doug Reynolds; Eric Robertson; Todd Schaef; Jack Schmid; Yuri Shur; Arion Tussing; Jack Walker; Katey Walter; Shannon Watson; Daniel White; Gregory White; Mark White; Richard Wies; Tom Williams; Dennis Witmer; Craig Wollard; Tao Zhu

    2008-12-31

    The Arctic Energy Technology Development Laboratory was created by the University of Alaska Fairbanks in response to a congressionally mandated funding opportunity through the U.S. Department of Energy (DOE), specifically to encourage research partnerships between the university, the Alaskan energy industry, and the DOE. The enabling legislation permitted research in a broad variety of topics particularly of interest to Alaska, including providing more efficient and economical electrical power generation in rural villages, as well as research in coal, oil, and gas. The contract was managed as a cooperative research agreement, with active project monitoring and management from the DOE. In the eight years of this partnership, approximately 30 projects were funded and completed. These projects, which were selected using an industry panel of Alaskan energy industry engineers and managers, cover a wide range of topics, such as diesel engine efficiency, fuel cells, coal combustion, methane gas hydrates, heavy oil recovery, and water issues associated with ice road construction in the oil fields of the North Slope. Each project was managed as a separate DOE contract, and the final technical report for each completed project is included with this final report. The intent of this process was to address the energy research needs of Alaska and to develop research capability at the university. As such, the intent from the beginning of this process was to encourage development of partnerships and skills that would permit a transition to direct competitive funding opportunities managed from funding sources. This project has succeeded at both the individual project level and at the institutional development level, as many of the researchers at the university are currently submitting proposals to funding agencies, with some success.

  13. On Measuring Cosmic Ray Energy Spectra with the Rapidity Distributions

    Science.gov (United States)

    Bashindzhagyan, G.; Adams, J.; Chilingarian, A.; Drury, L.; Egorov, N.; Golubkov, S.; Korotkova, N.; Panasyuk, M.; Podorozhnyi, D.; Procqureur, J.

    2000-01-01

    An important goal of cosmic ray research is to measure the elemental energy spectra of galactic cosmic rays up to 10(exp 16) eV. This goal cannot be achieved with an ionization calorimeter because the required instrument is too massive for space flight. An alternate method will be presented. This method is based on measuring the primary particle energy by determining the angular distribution of secondaries produced in a target layer. The proposed technique can be used over a wide range of energies (10 (exp 11) -10 (exp 16) eV) and gives an energy resolution of 60% or better. Based on this technique, a conceptual design for a new instrument (KLEM) will be presented. Due to its light weight, this instrument can have a large aperture enabling the direct measurement of cosmic rays to 1016 eV.

  14. Methods for Rapid Screening in Woody Plant Herbicide Development

    Directory of Open Access Journals (Sweden)

    William Stanley

    2014-07-01

    Full Text Available Methods for woody plant herbicide screening were assayed with the goal of reducing resources and time required to conduct preliminary screenings for new products. Rapid screening methods tested included greenhouse seedling screening, germinal screening, and seed screening. Triclopyr and eight experimental herbicides from Dow AgroSciences (DAS 313, 402, 534, 548, 602, 729, 779, and 896 were tested on black locust, loblolly pine, red maple, sweetgum, and water oak. Screening results detected differences in herbicide and species in all experiments in much less time (days to weeks than traditional field screenings and consumed significantly less resources (<500 mg acid equivalent per herbicide per screening. Using regression analysis, various rapid screening methods were linked into a system capable of rapidly and inexpensively assessing herbicide efficacy and spectrum of activity. Implementation of such a system could streamline early-stage herbicide development leading to field trials, potentially freeing resources for use in development of beneficial new herbicide products.

  15. Economic Growth of a Rapidly Developing Economy: Theoretical Formulation

    Directory of Open Access Journals (Sweden)

    Oleg Sergeyevich Sukharev

    2016-06-01

    Full Text Available The subject matter of the article is the description of economic growth. Modern economy is characterized by a high rate of changes. These changes are the limiting parameters of modern development, which requires a modification of the basic models of growth, the substantiation of the expediency and necessity of a rapid development strategy. In a simple mathematical form, the statement of the problem of economic growth in the “green economy” is examined, in which the costs of environmental measures are not considered a priori as hampering economic development (as it is common for a number of modern neoclassical and neo-Keynesian growth models. The methodological basis of the article are the econometric approach and modelling method. The article has a theoretical character. The main hypothesis supposes that the rapid development strategy cannot make an adequate development strategy under certain conditions, but may be acceptable in other its specific conditions. In this sense, the important growth conditions are the availability of resources, the effectiveness of institutions and the current economic structure, the technological effectiveness of economy, as well as the conditions of technological development (“green economy” and the path of such development. In the article, on the theoretical level of analysis, the substantiation of the adequacy of the rapid development strategy for an economic system is given, whose goal is to achieve the standard of living of the countryleader. Based on the assumptions introduced, the period for which the rapid development strategy might be implemented and the economic lag of the country might be reduced from the country-leader is determined. The conditions that ensure the impact of innovations on the rate of economic development are summarized. The introduced range of dependencies and relations can be useful for the elaboration of the theory of innovation development and for the formation of a new

  16. Development and implementation of a rapid real-time polymerase ...

    African Journals Online (AJOL)

    6–10 May 2012. * To whom all correspondence should be addressed. ☎ +27 16 430-8403; fax: +27 16 455-2055; e-mail: nleat@randwater.co.za. Development and implementation of a rapid real-time polymerase chain reaction assay for the detection of toxigenic Vibrio cholerae in water. Neil Leat* and Monique Grundlingh.

  17. GLIMPSE: a rapid decision framework for energy and environmental policy

    Science.gov (United States)

    Over the coming decades, new energy production technologies and the policies that oversee them will affect human health, the vitality of our ecosystems, and the stability of the global climate. The GLIMPSE decision model framework provides insights about the implications of techn...

  18. Renewable energy policy and wind energy development in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Zitzer, Suzanne E. [UFZ - Umweltforschungszentrum Leipzig-Halle GmbH, Leipzig (Germany). Department Urban Ecology, Environmental Planing and Transport

    2009-07-15

    The author of the contribution under consideration reports on the renewable energy policy and wind energy development in the Federal Republic of Germany. First of all, the author describes the historical development of the renewable energy policy since the 1970ies. Then, the environmental policies of the Red-Green Coalition (till to 2005) and of the Grand Coalition (since 2005) as well as the Renewable Energy Sources Act are described. The next section of this contribution is concern to the development of wind energy in the Federal Republic of Germany under consideration of onshore wind energy and offshore wind energy.

  19. Cultural energy grassroots and development.

    Science.gov (United States)

    Kleymeyer, C D

    1992-01-01

    The importance of culture in economic development is discussed based on 10 years of case reports in the publication, Grassroots Development. Cultural energy is considered important for the launching, sustainment, and expansion of programs; yet, only 10% of IAF Foundation grants over 20 years have focused on cultural energy as a tool for development. By the late 1960s development theorists blamed the lack of progress on "backward looking traditional cultures." In Latin America culture was seen as an obstacle to be overcome rather than an opportunity. The debt and environmental crisis of the 1980s has opened the doors to new methods. A recent study of the Aymara and Mapuche in Chile found that uprooting local culture meant loss of land, cultural roots, and social relationships, as well as loss of stewardship of the environment. The Kuna is Panama were seen as successful in combining traditional ways with Western ideas in formation of an ecological park; this was accomplished through self-confidence and self-will in grassroots development. However, the Kuna have also undergone changes and the ancestral view of nature and humanity's place in it is being undermined. The acculturation of the young may leave an emptiness that is neither Panamanian nor Kuna. The Chimborazo Indians in the highlands of Ecuador have only achieved moderate success in eliminating poverty in spite of international efforts which imposed development schemes onto the community. The Feria Educativa (Educational Fair) was formed among indigenous volunteers working with the Serviceo Ecuatoriano de Voluntarios-Chimborazo to promote culture and self-help. Members enter the community only when invited; the program uses puppets and sociodramas to portray common problems such as illiteracy and stimulate group participation. Their efforts have been successful in establishing literacy, reforestation, and economic activity programs. The Kuna shopped among Western ideas to chose ones appropriate to their

  20. Development direction of energy resources

    Energy Technology Data Exchange (ETDEWEB)

    Hua, A. [China University of Mining and Technology, Xuzhou (China). College of Architecture and Civil Engineering

    2002-01-01

    According to the prediction of the developmental trend of the economy and population of the world, the mineral energy resource is faced with exhaustion. Exploitation and combustion of minerals are seriously polluting the environment. In addition, the production areas of mineral resources are not the energy consumption areas. Therefore, the energy resource of the world is at the stage of structural reorganisation. The exploitation and utilisation of green energy resources such as solar energy, wind energy, oceanic energy, geothermic energy, biologic energy and hydrogen in China are introduced briefly. The green energy resources have abundant reserves. Their utilisation is propitious to environment protection, and the relevant technique has come to a generalised stage. It is believed that green energy should be the developmental direction of energy resource and that the speciality of green energy ought to be set up in energy resources colleges to train the required personnel. 10 refs., 5 tabs.

  1. DEVELOPMENT OF THE PRIEST RAPIDS TURBINE UPGRADE PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    DeBolt, Donald; Richmond, Marshall C.; Donelson, Richard K.; Strickler, Brad; Weisbeck, Molly

    2015-07-14

    The Priest Rapids Dam is located on the Columbia River and is operated by Public Utility District No. 2 of Grant County, WA (GCPUD). In operation since 1959, GCPUD decided that a major upgrade was necessary. As with other hydroelectric facilities on the Columbia River, improving fish passage at Priest Rapids Dam is of great importance for salmon and steelhead populations in the Pacific Northwest. Consequently, GCPUD established the Priest Rapids Turbine Upgrade Project to extend the life of the units, increase efficiency and power production, and improve fish-passage. The Priest Rapids powerhouse is equipped with 10 vertical Kaplan turbines with runner diameters of 7.21 m operating under net heads varying from 18 m to 27 m. The scope of the project included a design competition involving three turbine manufacturers providing up to two designs for evaluation. Selection of the replacement design was determined by the lowest evaluated price based on model test results conducted at an independent laboratory (Ecole Polytechnique Federale de Lausanne in Lausanne Switzerland) and a biological performance score determined by a newly developed Biological Performance Assessment (BioPA) performed by Pacific Northwest National Laboratory in Richland, WA. In the paper, the hydraulic design challenges are reviewed, in addition to comparisons of designs evaluated during the competitive model test program and biological assessment. The paper also provides a description of the process followed by GCPUD, and how the evaluation criteria influenced the development and the finally selected solution.

  2. Solar energy and substainable development

    Science.gov (United States)

    Roux, Maria Carmen; Nalin, Olivier

    2010-05-01

    At the dawn of the 21st century, the world population doesn't stop rising. More than ever, energy and environment problems remain at the heart of our society concerns. What will we leave to the future generations ? Therefore, a twenty pupil class of 4e (13 and 14 year old pupils) has made a specific work about this topic, called "solar power and sustainable development". Initially, the pupils participated to the settlement of a meteorological station on the school grounds. This station, which provides readings about temperature, relative humidity, rainfall, sun radiations, wind power and wind heading is fed by photovoltaic cells and thus works independently. The pupils have then come to realize the ecological and practical interests of such a functioning (e.g. : for the latter : neither batteries nor electrical wires are needed). These past few years, in Provence (a highly sunny region), many solar panel installations have been created and many private house roofs have been equipped with photovoltaic cells. Indeed, this energy presents some significant assets : it is free, clean and will never run out. The village of Vinon sur Verdon, where stands our college, is partly fed by a solar panel park, located a few kilometers away. Strongly sensitive to the assets of this energy source, the pupils have made a poster asserting the benefits of solar power. Another side of solar energy has been asserted : the output of hot sanitary water. They have built a miniature on this topic. In order to be thorough, some elements remain in shadow, such as environment impacts done by the making, the transport and the recycling of solar panels that will be brought up in a collaboration with research establishments.

  3. On Current Conversion between Particle Rapidity and Pseudorapidity Distributions in High Energy Collisions

    Directory of Open Access Journals (Sweden)

    Fu-Hu Liu

    2013-01-01

    Full Text Available In high energy collisions, one usually needs to give a conversion between the particle rapidity and pseudorapidity distributions. Currently, two equivalent conversion formulas are used in experimental and theoretical analyses. An investigation in the present work shows that the two conversions are incomplete. Then, we give a revision on the current conversion between the particle rapidity and pseudorapidity distributions.

  4. Description of High-Energy pp Collisions Using Tsallis Thermodynamics: Transverse Momentum and Rapidity Distributions

    CERN Document Server

    Marques, L.; Deppman, A.

    2015-01-01

    A systematic analysis of transverse momentum and rapidity distributions measured in high-energy proton - proton (pp) collisions for energies ranging from 53 GeV to 7 TeV using Tsallis thermodynamics is presented. The excellent description of all transverse momentum spectra obtained in earlier analyses is confirmed and extended. All energies can be described by a single Tsallis temperature of 68 +/- 5 MeV at all beam energies and particle types investigated (43 in total). The value of the entropic index, q, shows a wider spread but is always close to q approx 1.146. These values are then used to describe the rapidity distributions using a superposition of two Tsallis fireballs along the rapidity axis. It is concluded that the hadronic system created in high-energy p - p collisions between 53 GeV and 7 TeV can be seen as obeying Tsallis thermodynamics.

  5. Onboard Radar Processing Development for Rapid Response Applications

    Science.gov (United States)

    Lou, Yunling; Chien, Steve; Clark, Duane; Doubleday, Josh; Muellerschoen, Ron; Wang, Charles C.

    2011-01-01

    We are developing onboard processor (OBP) technology to streamline data acquisition on-demand and explore the potential of the L-band SAR instrument onboard the proposed DESDynI mission and UAVSAR for rapid response applications. The technology would enable the observation and use of surface change data over rapidly evolving natural hazards, both as an aid to scientific understanding and to provide timely data to agencies responsible for the management and mitigation of natural disasters. We are adapting complex science algorithms for surface water extent to detect flooding, snow/water/ice classification to assist in transportation/ shipping forecasts, and repeat-pass change detection to detect disturbances. We are near completion of the development of a custom FPGA board to meet the specific memory and processing needs of L-band SAR processor algorithms and high speed interfaces to reformat and route raw radar data to/from the FPGA processor board. We have also developed a high fidelity Matlab model of the SAR processor that is modularized and parameterized for ease to prototype various SAR processor algorithms targeted for the FPGA. We will be testing the OBP and rapid response algorithms with UAVSAR data to determine the fidelity of the products.

  6. Energy Reforms in The Developing World: Sustainable Development Compromised?

    Directory of Open Access Journals (Sweden)

    Said Mbogo Abdallah

    2015-06-01

    Full Text Available Energy sector reforms with an emphasis on electricity growth have been taking place extensively and rapidly worldwide Particularly, motivated chiefly by classical economics’ standpoint of efficiency and market considerations, reforms have been made in the developed North. Models of reforms in the North have in turn been replicated in developing countries. However, questions arise as to whether the models used are suitable for the mostly rural and socioeconomically disadvantaged economies in the South. It is argued in this paper that a sustainability focused mode of reforms guided by futures studies is needed for such economies. Reforms taking place in Kenya and neighbouring countries are in particular examined from a sustainable future perspective; and appropriate improvements and further research are recommended.

  7. Rapid development of fungicide resistance by Sclerotinia homoeocarpa on turfgrass.

    Science.gov (United States)

    Jo, Young-Ki; Chang, Seog Won; Boehm, Michael; Jung, Geunhwa

    2008-12-01

    Dollar spot, caused by Sclerotinia homoeocarpa, is the most prevalent and economically important turfgrass disease in North America. Increasing levels of fungicide resistance, coupled with tightening environmental scrutiny of existing fungicides, has left fewer options for managing dollar spot. More knowledge about S. homoeocarpa populations is needed to improve dollar spot management strategies, especially with respect to minimizing the development of fungicide resistance. Population diversity of S. homoeocarpa was examined using inter-simple sequence repeat markers and vegetative compatibility assays. Two subgroups were found in S. homoeocarpa field populations on both fairway and putting green turfgrass at a research field in Wisconsin. These subgroups were genetically different, vegetatively incompatible, and had different fungicide sensitivities. The frequency of the two genetic subgroups differed significantly between the fairway and putting green, but was uniform within the fairway or within the green. Population dynamics of S. homoeocarpa in response to two systemic fungicides (thiophanate-methyl and propiconazole) were assessed based on in vitro fungicide sensitivity. Dynamics of S. homoeocarpa populations depended on the presence of fungicide-resistant isolates in the initial populations before fungicide applications and changed rapidly after fungicide applications. Shifting of the population toward propiconazole resistance was gradual, whereas thiophanate-methyl resistance developed rapidly in the population. In conclusion, field populations of S. homoeocarpa containing genetically distinct, vegetatively incompatible groups were different on turfgrass that was managed differently, and they were changed rapidly after exposure to fungicides.

  8. Modeling of subglacial hydrological development following rapid supraglacial lake drainage

    Science.gov (United States)

    Dow, C. F.; Kulessa, B.; Rutt, I. C.; Tsai, V. C.; Pimentel, S.; Doyle, S. H.; van As, D.; Lindbäck, K.; Pettersson, R.; Jones, G. A.; Hubbard, A.

    2015-06-01

    The rapid drainage of supraglacial lakes injects substantial volumes of water to the bed of the Greenland ice sheet over short timescales. The effect of these water pulses on the development of basal hydrological systems is largely unknown. To address this, we develop a lake drainage model incorporating both (1) a subglacial radial flux element driven by elastic hydraulic jacking and (2) downstream drainage through a linked channelized and distributed system. Here we present the model and examine whether substantial, efficient subglacial channels can form during or following lake drainage events and their effect on the water pressure in the surrounding distributed system. We force the model with field data from a lake drainage site, 70 km from the terminus of Russell Glacier in West Greenland. The model outputs suggest that efficient subglacial channels do not readily form in the vicinity of the lake during rapid drainage and instead water is evacuated primarily by a transient turbulent sheet and the distributed system. Following lake drainage, channels grow but are not large enough to reduce the water pressure in the surrounding distributed system, unless preexisting channels are present throughout the domain. Our results have implications for the analysis of subglacial hydrological systems in regions where rapid lake drainage provides the primary mechanism for surface-to-bed connections.

  9. A new decision support method for local energy planning in developing countries

    NARCIS (Netherlands)

    van Beeck, N.M.J.P.

    2003-01-01

    Energy is required for almost any economic activity. Therefore, regions in developing countries that show rapid economic growth experience a substantial increase in energy demand, creating the need for new energy infrastructure. Energy planning is used to match future energy supply with demand.

  10. Renewable Sources of Energy and Development.

    Science.gov (United States)

    Diatta, Christian Sina

    1979-01-01

    Reviewed are the status of conventional sources of energy, prospects for the development of alternative sources of energy, and the consequences of that development on countries that are in the process of industrialization. (BT)

  11. Rapidly switching multidirectional defibrillation: reversal of ventricular fibrillation with lower energy shocks.

    Science.gov (United States)

    Viana, Marcelo A; Bassani, Rosana A; Petrucci, Orlando; Marques, Denilson A; Bassani, José Wilson M

    2014-12-01

    Cardiac arrest after open surgery has an incidence of approximately 3%, of which more than 50% of the cases are due to ventricular fibrillation. Electrical defibrillation is the most effective therapy for terminating cardiac arrhythmias associated with unstable hemodynamics. The excitation threshold of myocardial microstructures is lower when external electrical fields are applied in the longitudinal direction with respect to the major axis of cells. However, in the heart, cell bundles are disposed in several directions. Improved myocardial excitation and defibrillation have been achieved by applying shocks in multiple directions via intracardiac leads, but the results are controversial when the electrodes are not located within the cardiac chambers. This study was designed to test whether rapidly switching shock delivery in 3 directions could increase the efficiency of direct defibrillation. A multidirectional defibrillator and paddles bearing 3 electrodes each were developed and used in vivo for the reversal of electrically induced ventricular fibrillation in an anesthetized open-chest swine model. Direct defibrillation was performed by unidirectional and multidirectional shocks applied in an alternating fashion. Survival analysis was used to estimate the relationship between the probability of defibrillation and the shock energy. Compared with shock delivery in a single direction in the same animal population, the shock energy required for multidirectional defibrillation was 20% to 30% lower (P < .05) within a wide range of success probabilities. Rapidly switching multidirectional shock delivery required lower shock energy for ventricular fibrillation termination and may be a safer alternative for restoring cardiac sinus rhythm. Copyright © 2014 The American Association for Thoracic Surgery. Published by Elsevier Inc. All rights reserved.

  12. Rapidity dependence of charged pion production at relativistic energies using Tsallis statistics

    Energy Technology Data Exchange (ETDEWEB)

    Ristea, Oana; Jipa, Alexandru [University of Bucharest, Faculty of Physics, Bucharest - Magurele (Romania); Ristea, Catalin [University of Bucharest, Faculty of Physics, Bucharest - Magurele (Romania); Institute of Space Science, Bucharest - Magurele (Romania)

    2017-05-15

    Transverse momentum distributions of charged pions produced in Au+Au collisions at 62.4 GeV, 130 GeV, 200 GeV, Cu+Cu and d+Au collisions at 200 GeV, p+p collisions at 62.4 and 200 GeV and Pb+Pb collisions at 17.3 GeV are studied using the Tsallis distribution as a parametrization. The non-extensivity parameter and Tsallis volume increase with energy, while the Tsallis temperature shows a decrease at higher energies. Using BRAHMS p{sub T} spectra obtained in Au+Au collisions at 62.4 GeV and 200 GeV, Tsallis fit parameters are obtained on a very wide rapidity range. Results are compared with p+p and Cu+Cu data and changes of Tsallis parameters with rapidity and energy are investigated. We found that non-extensivity parameter q shows a decrease from midrapidity to forward rapidities for all the studied systems. Tsallis volume, V, increases with the system size from p+p, Cu+Cu to Au+Au, both in central rapidity region and at forward rapidities. The values of temperatures increase with rapidity, but the T/cosh(y) ratio is constant as a function of rapidity. (orig.)

  13. Neighborhood Energy/Economic Development project

    Energy Technology Data Exchange (ETDEWEB)

    1991-12-31

    Energy costs impact low income communities more than anyone else. Low income residents pay a larger percentage of their incomes for energy costs. In addition, they generally have far less discretionary energy use to eliminate in response to increasing energy prices. Furthermore, with less discretionary income, home energy efficiency improvements are often too expensive. Small neighborhood businesses are in the same situation. Improved efficiency in the use of energy can improve this situation by reducing energy costs for residents and local businesses. More importantly, energy management programs can increase the demand for local goods and services and lead to the creation of new job training and employment opportunities. In this way, neighborhood based energy efficiency programs can support community economic development. The present project, undertaken with the support of the Urban Consortium Energy Task Force, was intended to serve as a demonstration of energy/economic programming at the neighborhood level. The San Francisco Neighborhood Energy/Economic Development (NEED) project was designed to be a visible demonstration of bringing the economic development benefits of energy management home to low-income community members who need it most. To begin, a Community Advisory Committee was established to guide the design of the programs to best meet needs of the community. Subsequently three neighborhood energy/economic development programs were developed: The small business energy assistance program; The youth training and weatherization program; and, The energy review of proposed housing development projects.

  14. Wind energy development as a part of Poland's industrial development

    DEFF Research Database (Denmark)

    Stoerring, Dagmara; Hvelplund, Frede Kloster

    2003-01-01

    The paper concludes with recommendations on how to make wind energy development a part of the industrial development in Poland by introducing renewable energy support mechanisms to improve the conditions for companies to develop wind technology in Poland.......The paper concludes with recommendations on how to make wind energy development a part of the industrial development in Poland by introducing renewable energy support mechanisms to improve the conditions for companies to develop wind technology in Poland....

  15. The Warburg effect as an adaptation of cancer cells to rapid fluctuations in energy demand.

    Directory of Open Access Journals (Sweden)

    Tamir Epstein

    Full Text Available To maintain optimal fitness, a cell must balance the risk of inadequate energy reserve for response to a potentially fatal perturbation against the long-term cost of maintaining high concentrations of ATP to meet occasional spikes in demand. Here we apply a game theoretic approach to address the dynamics of energy production and expenditure in eukaryotic cells. Conventionally, glucose metabolism is viewed as a function of oxygen concentrations in which the more efficient oxidation of glucose to CO2 and H2O produces all or nearly all ATP except under hypoxic conditions when less efficient (2 ATP/ glucose vs. about 36ATP/glucose anaerobic metabolism of glucose to lactic acid provides an emergency backup. We propose an alternative in which energy production is governed by the complex temporal and spatial dynamics of intracellular ATP demand. In the short term, a cell must provide energy for constant baseline needs but also maintain capacity to rapidly respond to fluxes in demand particularly due to external perturbations on the cell membrane. Similarly, longer-term dynamics require a trade-off between the cost of maintaining high metabolic capacity to meet uncommon spikes in demand versus the risk of unsuccessfully responding to threats or opportunities. Here we develop a model and computationally explore the cell's optimal mix of glycolytic and oxidative capacity. We find the Warburg effect, high glycolytic metabolism even under normoxic conditions, is represents a metabolic strategy that allow cancer cells to optimally meet energy demands posed by stochastic or fluctuating tumor environments.

  16. Energy 2007. Research, development, demonstration; Energi 07. Forskning, udvikling, demonstration

    Energy Technology Data Exchange (ETDEWEB)

    Byriel, I.P.; Justesen, Helle; Beck, A.; Borup Jensen, J.; Rosenfeldt Jakobsen, Kl; Jacobsen, Steen Hartvig (eds.)

    2007-08-10

    Danish energy research is in an exciting and challenging situation. Rising oil prices, unstable energy supply, climate policy responsibilities and globalization have brought development of new environmentally friendly and more efficient energy technologies into focus. Promising international markets for newly developed energy technologies are emerging, and at the same time well established Danish positions of strength are challenged by new strong actors on the global market. The Danish government has set to work on its vision of an appreciable strengthening of public energy research funding through the recent law on the energy technological development and demonstration programme EUDP and the realization of globalization funds. The interaction between basic and applied research must be kept intact. In this report the various Danish energy research programmes administered by Energinet.dk, Danish Energy Authority, Danish Energy Association, Danish Council for Strategic Research's Programme Commission on Energy and Environment and Danish National Advanced Technology Foundation, coordinate their annual reports for the first time. The aim of Energy 2007 is to give the reader an idea of how the energy research programmes collaborate on solving the major energy technology challenges - also in an international context. (BA)

  17. Rapidly developing iatrogenic hyponatremia in a child following tonsillectomy.

    Science.gov (United States)

    Taskin, Umit; Binay, Omer; Binay, Cigdem; Yigit, Ozgur

    2012-11-01

    Hyponatremia develops as a result of the inappropriate secretion of antidiuretic hormone. In rare cases, it develops as an iatrogenic complication. For example, acute iatrogenic post-tonsillectomy hyponatremia has been described in children following the infusion of hypo- or isotonic fluid. We report a case of rapidly developing post-tonsillectomy iatrogenic hyponatremia in a 5-year-old girl following an excessive infusion of hypotonic fluid. Her signs and symptoms began with nausea and vomiting and progressed to seizures and coma. We corrected the electrolyte disturbance by infusing a 3% sodium chloride solution until her neurologic manifestations disappeared, at which time her serum sodium concentration had risen back to 135 mEq/L. Otolaryngologists are not generally exposed to much information about hyponatremia, so we must be aware of its associated neurologic signs and symptoms.

  18. Dynamics Analysis of Wind Energy Production Development

    Science.gov (United States)

    Berg, V. I.; Zakirzakov, A. G.; Gordievskaya, E. F.

    2017-01-01

    The paper presents the analysis of the introduction experience and dynamics development of the world wind energy production. Calculated the amount of wind energy sources investments and the production capacity growth dynamics of the wind turbines. The studies have shown that the introduction dynamics of new wind energy sources is higher than any other energy source.

  19. Renewable Energy Development in India

    Energy Technology Data Exchange (ETDEWEB)

    Gupta, K.M.

    2007-07-01

    India has done a significant progress in the power generation in the country. The installed generation capacity was 1300 megawatt (MW) at the time of Independence i.e. about 60 years back. The total generating capacity anticipated at the end of the Tenth Plan on 31-03-2007, is 1, 44,520 MW which includes the generation through various sectors like Hydro, Thermal and Nuclear. Emphasis is given to the renewable energy programme towards gradual commercialization. This programme is looked after by the Ministry of Non-Conventional Sources of energy. Since the availability of fossil fuel is on the decline therefore, in this backdrop the norms for conventional or renewable sources of energy (RSE) is given importance not only in India but has attracted the global attention. The main items under RSE are as follows: (i) Hydro Power (ii) Solar Power (iii) Wind Power (iv) Bio-mass Power (v) Energy from waste (vi) Ocean energy, and (vii) Alternative fuel for surface transportation. Evolution of power transformer technology in the country during the past five decades is quite impressive. There are manufacturers in the country with full access to the latest technology at the global level. Some of the manufacturers have impressive R&D set up to support the technology. Renewable energy is very much promoted by the Chinese Government. At the same time as the law was passed, the Chinese Government set a target for renewable energy to contribute 10% of the country's gross energy consumption by 2020, a huge increase from the current 1%. It has been felt that there is rising demand for energy, food and raw materials by a population of 2.5 billion Chinese and Indians. Both these countries have large coal dominated energy systems in the world and the use of fossil fuels such as coal and oil releases carbon dioxide (CO2) into the air which adds to the greenhouse gases which lead to global warming. (auth)

  20. Statistical Analysis of Development Trends in Global Renewable Energy

    Directory of Open Access Journals (Sweden)

    Marina D. Simonova

    2016-01-01

    Full Text Available The article focuses on the economic and statistical analysis of industries associated with the use of renewable energy sources in several countries. The dynamic development and implementation of technologies based on renewable energy sources (hereinafter RES is the defining trend of world energy development. The uneven distribution of hydrocarbon reserves, increasing demand of developing countries and environmental risks associated with the production and consumption of fossil resources has led to an increasing interest of many states to this field. Creating low-carbon economies involves the implementation of plans to increase the proportion of clean energy through renewable energy sources, energy efficiency, reduce greenhouse gas emissions. The priority of this sector is a characteristic feature of modern development of developed (USA, EU, Japan and emerging economies (China, India, Brazil, etc., as evidenced by the inclusion of the development of this segment in the state energy strategies and the revision of existing approaches to energy security. The analysis of the use of renewable energy, its contribution to value added of countries-producers is of a particular interest. Over the last decade, the share of energy produced from renewable sources in the energy balances of the world's largest economies increased significantly. Every year the number of power generating capacity based on renewable energy is growing, especially, this trend is apparent in China, USA and European Union countries. There is a significant increase in direct investment in renewable energy. The total investment over the past ten years increased by 5.6 times. The most rapidly developing kinds are solar energy and wind power.

  1. Renewable energy strategies for sustainable development

    DEFF Research Database (Denmark)

    Lund, Henrik

    2005-01-01

    production, and replacement of fossil fuels by various sources of renewable energy. Consequently, large-scale renewable energy implementation plans must include strategies of how to integrate the renewable sources in coherent energy systems influenced by energy savings and efficiency measures. Based......This paper discusses the perspective of renewable energy (wind, solar, wave and biomass) in the making of strategies for a sustainable development. Such strategies typically involve three major technological changes: energy savings on the demand side, efficiency improvements in the energy...... on the case of Denmark, this paper discusses the problems and perspectives of converting present energy systems into a 100 percent renewable energy system. The conclusion is that such development will be possible. The necessary renewable energy sources are present, if further technological improvements...

  2. Development of Nylon Based FDM Filament for Rapid Tooling Application

    Science.gov (United States)

    Singh, R.; Singh, S.

    2014-04-01

    There has been critical need for development of cost effective nylon based wire to be used as feed stock filament for fused deposition modelling (FDM) machine. But hitherto, very less work has been reported for development of alternate solution of acrylonitrile butadiene styrene (ABS) based wire which is presently used in most of FDM machines. The present research work is focused on development of nylon based wire as an alternative of ABS wire (which is to be used as feedstock filament on FDM) without changing any hardware or software of machine. For the present study aluminium oxide (Al2O3) as additive in different proportion has been used with nylon fibre. Single screw extruder was used for wire preparation and wire thus produced was tested on FDM. Mechanical properties i.e. tensile strength and percentage elongation of finally developed wire have been optimized by Taguchi L9 technique. The work represented major development in reducing cost and time in rapid tooling applications.

  3. Geothermal energy in Nevada: development and utilization

    Energy Technology Data Exchange (ETDEWEB)

    1982-01-01

    The nature of geothermal resources in Nevada and resource applications are discussed. The social and economic advantages of using geothermal energy are outlined. Federal and state programs established to foster the development of geothermal energy are discussed. (MHR)

  4. Renewable Energy Development in Nigeria: More than ...

    African Journals Online (AJOL)

    Abstract. To revamp the current energy supply system, this paper opines that Nigeria should embrace a new paradigm of global environmental sensitivity that includes the development of renewable and alternative energy sources ...

  5. Long Life, High Energy Cell Development Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA has a need to develop higher energy density battery systems to meet the power requirements of future energy devices. In this proposed Phase I program, PSI will...

  6. Microstructural development of rapid solidification in Al-Si powder

    Energy Technology Data Exchange (ETDEWEB)

    Jin, Feng [Iowa State Univ., Ames, IA (United States)

    1995-09-26

    The microstructure and the gradient of microstructure that forms in rapidly solidificated powder were investigated for different sized particles. High pressure gas atomization solidification process has been used to produce a series of Al-Si alloys powders between 0.2 μm to 150 μm diameter at the eutectic composition (12.6 wt pct Si). This processing technique provides powders of different sizes which solidify under different conditions (i.e. interface velocity and interface undercooling), and thus give different microstructures inside the powders. The large size powder shows dendritic and eutectic microstructures. As the powder size becomes smaller, the predominant morphology changes from eutectic to dendritic to cellular. Microstructures were quantitatively characterized by using optical microscope and SEM techniques. The variation in eutectic spacing within the powders were measured and compared with the theoretical model to obtain interface undercooling, and growth rate during the solidification of a given droplet. Also, nucleation temperature, which controls microstructures in rapidly solidified fine powders, was estimated. A microstructural map which correlates the microstructure with particle size and processing parameters is developed.

  7. Microstructural Development in Al-Si Powder During Rapid Solidification

    Energy Technology Data Exchange (ETDEWEB)

    Genau, Amber Lynn [Iowa State Univ., Ames, IA (United States)

    2004-01-01

    Powder metallurgy has become an increasingly important form of metal processing because of its ability to produce materials with superior mechanical properties. These properties are due in part to the unique and often desirable microstructures which arise as a result of the extreme levels of undercooling achieved, especially in the finest size powder, and the subsequent rapid solidification which occurs. A better understanding of the fundamental processes of nucleation and growth is required to further exploit the potential of rapid solidification processing. Aluminum-silicon, an alloy of significant industrial importance, was chosen as a model for simple eutectic systems displaying an unfaceted/faceted interface and skewed coupled eutectic growth zone, Al-Si powder produced by high pressure gas atomization was studied to determine the relationship between microstructure and alloy composition as a function of powder size and atomization gas. Critical experimental measurements of hypereutectic (Si-rich) compositions were used to determine undercooling and interface velocity, based on the theoretical models which are available. Solidification conditions were analyzed as a function of particle diameter and distance from nucleation site. A revised microstructural map is proposed which allows the prediction of particle morphology based on temperature and composition. It is hoped that this work, by providing enhanced understanding of the processes which govern the development of the solidification morphology of gas atomized powder, will eventually allow for better control of processing conditions so that particle microstructures can be optimized for specific applications.

  8. Deep Rapid Optical Follow-Up of Gravitational Wave Sources with the Dark Energy Camera

    Science.gov (United States)

    Cowperthwaite, Philip

    2018-01-01

    The detection of an electromagnetic counterpart associated with a gravitational wave detection by the Advanced LIGO and VIRGO interferometers is one of the great observational challenges of our time. The large localization regions and potentially faint counterparts require the use of wide-field, large aperture telescopes. As a result, the Dark Energy Camera, a 3.3 sq deg CCD imager on the 4-m Blanco telescope at CTIO in Chile is the most powerful instrument for this task in the Southern Hemisphere. I will report on the results from our joint program between the community and members of the dark energy survey to conduct rapid and efficient follow-up of gravitational wave sources. This includes systematic searches for optical counterparts, as well as developing an understanding of contaminating sources on timescales not normally probed by traditional untargeted supernova surveys. I will additionally comment on the immense science gains to be made by a joint detection and discuss future prospects from the standpoint of both next generation wide-field telescopes and next generation gravitational wave detectors.

  9. Rapid Development of Bespoke Unmanned Platforms for Atmospheric Science

    Science.gov (United States)

    Sobester, A.; Johnston, S. J.; Scanlan, J. P.; Hart, E. E.; O'Brien, N. S.

    2012-04-01

    The effective deployment of airborne atmospheric science instruments often hinges on the development cycle time of a suitable platform, one that is capable of delivering them to the desired altitude range for a specified amount of time, along a pre-determined trajectory. This could be driven by the need to respond rapidly to sudden, unexpected events (e.g., volcano eruptions, nuclear fallout, etc.) or simply to accommodate the iterative design and flight test cycle of the instrument developer. A shorter development cycle time would also afford us the ability to quickly adapt the hardware and control logic in response to unexpected results during an experimental campaign. We report on recent developments aimed at meeting this demand. As part of the Atmospheric Science Through Robotic Aircraft (ASTRA) initiative we have investigated the use of rapid prototyping technologies to this end, both on the 'airframe' of the platform itself and on the on-board systems. We show how fast multi-disciplinary design optimization techniques, coupled with computer-controlled additive manufacturing (3D printing) and laser cutting methods and electronic prototyping (using standard, modular, programmable building blocks) can lead to the delivery of a fully customized platform integrating a given instrument in a timescale of the order of ten days. Specific examples include the design and testing of a balloon-launched glider sensorcraft and a stratospheric balloon system. The 'vehicle' for the latter was built on a 3D printer using a copolymer thermoplastic material and fitted with a sacrificial protective 'cage' laser-cut from an open-cell foam. The data logging, tracking, sensor integration and communications services of the platform were constructed using the .net Gadgeteer open source hardware kit. The flight planning and eventual post-flight recovery of the system is enabled by a generic, stochastic trajectory simulation tool, also developed as part of the ASTRA initiative. This

  10. Improved rapid prototyping methodology for MPEG-4 IC development

    Science.gov (United States)

    Tang, Clive K. K.; Moseler, Kathy; Levi, Sami

    1998-12-01

    One important factor in deciding the success of a new consumer product or integrated circuit is minimized time-to- market. A rapid prototyping methodology that encompasses algorithm development in the hardware design phase will have great impact on reducing time-to-market. In this paper, a proven hardware design methodology and a novel top-down design methodology based on Frontier Design's DSP Station tool are described. The proven methodology was used during development of the MC149570 H.261/H.263 video codec manufactured by Motorola. This paper discusses an improvement to this method to create an integrated environment for both system and hardware development, thereby further reducing the time-to-market. The software tool chosen is DSP Station tool by Frontier Design. The rich features of DSP Station tool will be described and then it will be shown how these features may be useful in designing from algorithm to silicon. How this methodology may be used in the development of a new MPEG4 Video Communication ASIC will be outlined. A brief comparison with a popular tool, Signal Processing WorkSystem tool by Cadence, will also be given.

  11. Rapid Response Risk Assessment in New Project Development

    Science.gov (United States)

    Graber, Robert R.

    2010-01-01

    A capability for rapidly performing quantitative risk assessments has been developed by JSC Safety and Mission Assurance for use on project design trade studies early in the project life cycle, i.e., concept development through preliminary design phases. A risk assessment tool set has been developed consisting of interactive and integrated software modules that allow a user/project designer to assess the impact of alternative design or programmatic options on the probability of mission success or other risk metrics. The risk and design trade space includes interactive options for selecting parameters and/or metrics for numerous design characteristics including component reliability characteristics, functional redundancy levels, item or system technology readiness levels, and mission event characteristics. This capability is intended for use on any project or system development with a defined mission, and an example project will used for demonstration and descriptive purposes, e.g., landing a robot on the moon. The effects of various alternative design considerations and their impact of these decisions on mission success (or failure) can be measured in real time on a personal computer. This capability provides a high degree of efficiency for quickly providing information in NASA s evolving risk-based decision environment

  12. Polygenic Risk, Rapid Childhood Growth, and the Development of Obesity

    Science.gov (United States)

    Belsky, Daniel W.; Moffitt, Terrie E.; Houts, Renate; Bennett, Gary G.; Biddle, Andrea K.; Blumenthal, James A.; Evans, James P.; Harrington, HonaLee; Sugden, Karen; Williams, Benjamin; Poulton, Richie; Caspi, Avshalom

    2012-01-01

    Objective To test how genomic loci identified in genome-wide association studies influence the development of obesity. Design A 38-year prospective longitudinal study of a representative birth cohort. Setting The Dunedin Multidisciplinary Health and Development Study, Dunedin, New Zealand. Participants One thousand thirty-seven male and female study members. Main Exposures We assessed genetic risk with a multilocus genetic risk score. The genetic risk score was composed of single-nucleotide polymorphisms identified in genome-wide association studies of obesity-related phenotypes. We assessed family history from parent body mass index data collected when study members were 11 years of age. Main Outcome Measures Body mass index growth curves, developmental phenotypes of obesity, and adult obesity outcomes were defined from anthropometric assessments at birth and at 12 subsequent in-person interviews through 38 years of age. Results Individuals with higher genetic risk scores were more likely to be chronically obese in adulthood. Genetic risk first manifested as rapid growth during early childhood. Genetic risk was unrelated to birth weight. After birth, children at higher genetic risk gained weight more rapidly and reached adiposity rebound earlier and at a higher body mass index. In turn, these developmental phenotypes predicted adult obesity, mediating about half the genetic effect on adult obesity risk. Genetic associations with growth and obesity risk were independent of family history, indicating that the genetic risk score could provide novel information to clinicians. Conclusions Genetic variation linked with obesity risk operates, in part, through accelerating growth in the early childhood years after birth. Etiological research and prevention strategies should target early childhood to address the obesity epidemic. PMID:22665028

  13. Developments in high energy theory

    Indian Academy of Sciences (India)

    them aimed at a final unification of all fundamental forces including gravity. Attempts have been made to extend the reach of some of these theories, based on an underlying string-theory picture, all the way to the Planck energy scale MPl = (8πGN). −1/2,. GN being Newton's gravitational constant. MPl is. Keywords.

  14. Developments in high energy theory

    Indian Academy of Sciences (India)

    High-energy physics; gauge theories; Standard Model; physics beyond the ... elusive goal. The Standard Model describes the electromagnetic, weak and strong interactions, but only unifies the first two. Despite its spectacular success in ex ..... Towards the end of the 1960s, a path-breaking new 'deep inelastic' electron scat-.

  15. Renewable Energy Project Development Assistance (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2013-07-01

    This fact sheet provides information on the Tribes selected to receive assistance from the U.S. Department of Energy Office of Indian Energy 2013 Strategic Technical Assistance Response Team (START) Program, which provides technical expertise to support the development of next-generation energy projects on tribal lands.

  16. Economic Development, Urbanisation, Energy Consumption and ...

    African Journals Online (AJOL)

    Economic Development, Urbanisation, Energy Consumption and Climate Change Management in Nigeria. ... Journal Home > Vol 46, No 3 (2016) > ... If this energy is from traditional energy sources, then this translates into increased greenhouse gas emissions which lead to accelerated global warming and climate change.

  17. Development of Energy Efficiency Indicators in Russia

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    Russia is sometimes referred to as 'the Saudi Arabia of energy efficiency'; its vast potential to reduce energy consumption can be considered a significant 'energy reserve'. Russia, recognising the benefits of more efficient use of energy, is taking measures to exploit this potential. The president has set the goal to reduce energy intensity by 40% between 2007 and 2020. In the past few years, the IEA has worked closely with Russian authorities to support the development of energy efficiency indicators in Russia, critical to an effective implementation and monitoring of Russia's ambitious energy intensity and efficiency goals. The key findings of the IEA work with Russia on developing energy efficiency indicators form the core of this report.

  18. Cerebellum of the Premature Infant: Rapidly Developing, Vulnerable, Clinically Important

    Science.gov (United States)

    Volpe, Joseph J.

    2009-01-01

    Brain abnormality in surviving premature infants is associated with an enormous amount of neurodevelopmental disability, manifested principally by cognitive, behavioral, attentional, and socialization deficits, most commonly with only relatively modest motor deficits. The most recognized contributing neuropathology is cerebral white matter injury. The thesis of this review is that acquired cerebellar abnormality is a relatively less recognized but likely important cause of neurodevelopmental disability in small premature infants. The cerebellar disease may be primarily destructive (eg, hemorrhage, infarction) or primarily underdevelopment. The latter appears to be especially common and relates to a particular vulnerability of the cerebellum of the small premature infant. Central to this vulnerability are the extraordinarily rapid and complex developmental events occurring in the cerebellum. The disturbance of development can be caused either by direct adverse effects on the cerebellum, especially the distinctive transient external granular layer, or by indirect remote trans-synaptic effects. This review describes the fascinating details of cerebellar development, with an emphasis on events in the premature period, the major types of cerebellar abnormality acquired during the premature period, their likely mechanisms of occurrence, and new insights into the relation of cerebellar disease in early life to subsequent cognitive/behavioral/attentional/socialization deficits. PMID:19745085

  19. RAPIDE 0.0 RHIC Accelerator Physics Intrepid Development Environment

    Energy Technology Data Exchange (ETDEWEB)

    Satogata, T. [Brookhaven National Lab. (BNL), Upton, NY (United States); Saltmarsh, C. [Brookhaven National Lab. (BNL), Upton, NY (United States); Peggs, S. [Brookhaven National Lab. (BNL), Upton, NY (United States)

    1993-08-01

    This document is a guide to the common environmental features of computing in (and around) the RHIC Accelerator Physics.sectio on the 'zoo' cluster of UNJX workstations, in RAPIDE, the RHIC Accelerator Physics Intrepid Development Environment It is hoped tliat later revisions of this document will approach a more professional 'style guide', beyond the convenient collection of pointers and hints presented here. RAP does two kinds of computing, "controls" and "general", addressed in sections 2 and 3 of this document For general computing, efficient system administration requires cooperation in using a common environment There is a much stronger need to define - and adhere to - a commonly agreed set of styles (or rules) in developing controls software. Right now, these rules have been set "de facto". Future improvements to the controls environment, particularly in response to the opinions of users, depends on broad knowledge of what the rules are. There are environmental issues that are basic to both controls and general computing, and that are so fundamental that they are (almost) unarguable. They are described immediately below, in the next section.

  20. Governance Instruments for Energy Neutral Housing Developments

    OpenAIRE

    Qi Han; Sahul Reddy Kadarpeta; Bauke de Vries

    2011-01-01

    Netherlands has set national energy targets for year 2020 following the European Union vision. In this context at the local level Eindhoven Municipality has set its ambition to go energy neutral in housing sector by 2020 and decided to develop new energy neutral housing areas. Lack of strict regulations and appropriate forms of support aimed at relevant stakeholders involved has attributed to the lack of acceptance for energy neutral housing in the current housing market. Further lack of a de...

  1. Rapid Detection of Enterotoxigenic Clostridium perfringens by Real-Time Fluorescence Resonance Energy Transfer PCR

    National Research Council Canada - National Science Library

    dela Cruz, Wilfred P; Gozum, Mary M.A; Lineberry, Sarah F; Stassen, Sarah D; Daughtry, Marianne; Stassen, Nicholas A; Jones, Morris S; Johnson, Oswald L

    2006-01-01

    ...) produced by some strains during sporulation. We developed a quantitative real-time PCR assay based on fluorescence resonance energy transfer hybridization chemistry that targets the C. perfringens...

  2. Aniline Is Rapidly Converted Into Paracetamol Impairing Male Reproductive Development.

    Science.gov (United States)

    Holm, Jacob Bak; Chalmey, Clementine; Modick, Hendrik; Jensen, Lars Skovgaard; Dierkes, Georg; Weiss, Tobias; Jensen, Benjamin Anderschou Holbech; Nørregård, Mette Marie; Borkowski, Kamil; Styrishave, Bjarne; Martin Koch, Holger; Mazaud-Guittot, Severine; Jegou, Bernard; Kristiansen, Karsten; Kristensen, David Møbjerg

    2015-11-01

    Industrial use of aniline is increasing worldwide with production estimated to surpass 5.6 million metric tons in 2016. Exposure to aniline occurs via air, diet, and water augmenting the risk of exposing a large number of individuals. Early observations suggest that aniline is metabolized to paracetamol/acetaminophen, likely explaining the omnipresence of low concentrations of paracetamol in European populations. This is of concern as recent studies implicate paracetamol as a disrupter of reproduction. Here, we show through steroidogenic profiling that exposure to aniline led to increased levels of the Δ4 steroids, suggesting that the activity of CYP21 was decreased. By contrast, paracetamol decreased levels of androgens likely through inhibition of CYP17A1 activity. We confirm that aniline in vivo is rapidly converted to paracetamol by the liver. Intrauterine exposure to aniline and paracetamol in environmental and pharmaceutical relevant doses resulted in shortening of the anogenital distance in mice, a sensitive marker of fetal androgen levels that in humans is associated with reproductive malformations and later life reproductive disorders. In conclusion, our results provide evidence for a scenario where aniline, through its conversion into antiandrogenic paracetamol, impairs male reproductive development. © The Author 2015. Published by Oxford University Press on behalf of the Society of Toxicology. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  3. Development of Multiple Big Data Analytics Platforms with Rapid Response

    Directory of Open Access Journals (Sweden)

    Bao Rong Chang

    2017-01-01

    Full Text Available The crucial problem of the integration of multiple platforms is how to adapt for their own computing features so as to execute the assignments most efficiently and gain the best outcome. This paper introduced the new approaches to big data platform, RHhadoop and SparkR, and integrated them to form a high-performance big data analytics with multiple platforms as part of business intelligence (BI to carry out rapid data retrieval and analytics with R programming. This paper aims to develop the optimization for job scheduling using MSHEFT algorithm and implement the optimized platform selection based on computing features for improving the system throughput significantly. In addition, users would simply give R commands rather than run Java or Scala program to perform the data retrieval and analytics in the proposed platforms. As a result, according to performance index calculated for various methods, although the optimized platform selection can reduce the execution time for the data retrieval and analytics significantly, furthermore scheduling optimization definitely increases the system efficiency a lot.

  4. Drosophila provides rapid modeling of renal development, function, and disease

    Science.gov (United States)

    Romero, Michael F.

    2010-01-01

    The evolution of specialized excretory cells is a cornerstone of the metazoan radiation, and the basic tasks performed by Drosophila and human renal systems are similar. The development of the Drosophila renal (Malpighian) tubule is a classic example of branched tubular morphogenesis, allowing study of mesenchymal-to-epithelial transitions, stem cell-mediated regeneration, and the evolution of a glomerular kidney. Tubule function employs conserved transport proteins, such as the Na+, K+-ATPase and V-ATPase, aquaporins, inward rectifier K+ channels, and organic solute transporters, regulated by cAMP, cGMP, nitric oxide, and calcium. In addition to generation and selective reabsorption of primary urine, the tubule plays roles in metabolism and excretion of xenobiotics, and in innate immunity. The gene expression resource FlyAtlas.org shows that the tubule is an ideal tissue for the modeling of renal diseases, such as nephrolithiasis and Bartter syndrome, or for inborn errors of metabolism. Studies are assisted by uniquely powerful genetic and transgenic resources, the widespread availability of mutant stocks, and low-cost, rapid deployment of new transgenics to allow manipulation of renal function in an organotypic context. PMID:20926630

  5. The International Energy Agency`s role in world-wide wind energy development

    Energy Technology Data Exchange (ETDEWEB)

    Rangi, R. [Natural Resources Canada, Ottawa, Ontario (Canada); Ancona, D. [Dept. of Energy, Washington, DC (United States)

    1997-12-31

    Wind energy is now being deployed world-wide at a rapidly increasing rate and the International Energy Agency (IEA) has a changing role in its growth. IEA was founded in 1974 within the framework of the Organization for Economic Cooperation and Development (OECD) to collaborate on comprehensive international energy programs. IEA membership consists of eighteen parties from sixteen countries and the European Commission. Recently there has been increasing interest in IEA participation from both OECD and non-OECD countries. Non-OECD countries participating in various IEA Agreements include: China, India, Israel, Korea, and Russia. Because of its diverse international makeup, the IEA is viewed as a source of reliable technical and economic information. The World Bank has approached the Executive Committee for Wind Energy R & D, through the IEA Renewable Energy Working Party, to assist in the expansion of wind deployment. In addition, IEA is moving from R & D programs to include tracking of implementation incentives offered by its members.

  6. Rapid Cycle Amine (RCA) 3.0 System Development

    Science.gov (United States)

    Chullen, Cinda; Campbell, Colin; Papale, William; Hawes, Kevin; Wichowski, Robert

    2015-01-01

    The Rapid Cycle Amine (RCA) 3.0 system is currently under development by NASA, the Lyndon B. Johnson Space Center (JSC) in conjunction with United Technologies Corporation Aerospace Systems (UTAS). The RCA technology is a new carbon dioxide (CO2) and humidity removal system that has been baselined for the Advanced Extravehicular Mobility Unit (AEMU) Portable Life Support System. The evolution of the RCA development has progressed through several iterations of technology readiness levels including RCA 1.0, RCA 2.0, and RCA 3.0 test articles. The RCA is an advancement over currently technologies due to its unique regeneration capability. The RCA is capable of simultaneously removing CO2 and humidity from an influent air steam and subsequent regeneration when exposed to a vacuum source. The RCA technology uses two solid amine sorbent beds in an alternating fashion to adsorb CO2 and water (uptake mode) and desorb CO2 and water (regeneration mode) at the same time. The two beds operate in an efficient manner so that while one bed is in the uptake mode, the other is in the regeneration mode, thus continuously providing an on-service sorbent bed by which CO2 and humidity may be removed. The RCA 2.0 and 3.0 test articles were designed with a novel valve assembly which allows for switching between uptake and regeneration modes with only one moving part while minimizing gas volume losses to the vacuum source by means of an internal pressure equalization step during actuation. The RCA technology also is low power, small, and has performed extremely well in all development testing thus far. A final design was selected for the RCA 3.0, fabricated, assembled, and performance tested in 2014 with delivery to NASAJSC in January 2015. This paper will provide an overview on the RCA 3.0 system design and results of pre-delivery testing with references to the development of RCA 1.0 and RCA 2.0.

  7. Renewable energy for sustainable development and environment

    Energy Technology Data Exchange (ETDEWEB)

    Omer, Abdeen

    2010-09-15

    The increased availability of reliable and efficient energy services stimulates new development alternatives. This article discusses the potential for such integrated systems in the stationary and portable power market in response to the critical need for a cleaner energy technology. Throughout the theme several issues relating to renewable energies, environment and sustainable development are examined from both current and future perspectives. It is concluded that renewable environmentally friendly energy must be encouraged, promoted, implemented and demonstrated by full-scale plan especially for use in remote rural areas.

  8. [Rapidly developing vertebral eosinophilic granuloma. Apropos of a case].

    Science.gov (United States)

    Laburthe-Tolra, Y; Boutillier, J B; Chome, J

    1983-04-01

    Radiographs taken at an interval of one week showed collapse of the twelfth dorsal vertebra, very suggestive of an eosinophilic granuloma. A biopsy performed during surgery, because of the rapid progression of the lesion, was able to confirm the diagnosis.

  9. Energy storage research and development

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2008-01-01

    In 2007, US consumers experienced the highest sustained gasoline prices in recent history, in real terms, including those seen in the early 1980s1. Partially as a result of the $3/gallon gasoline prices, sales of hybrid electric vehicles (HEVs) increased almost 60% in 20072, and several automakers announced plans to develop plug-in hybrid electric vehicles (PHEVs)3. However, total sales of HEVs remained in the 2-3 percent range of all vehicle sales. An important step for continued HEV market penetration, as well as electrifying the nation's personal transportation, is the development of cost effective, long lasting, and abuse tolerant Li-ion batteries.

  10. Energy solutions for sustainable development. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Soenderberg Petersen, L.; Larsen, Hans (eds.)

    2007-05-15

    The Risoe International Energy Conference took place 22 - 24 May 2007. The conference focused on: 1) Future global energy development options. 2) Scenario and policy issues. 3) Measures to achieve low-level stabilization at, for example, 500 ppm CO2 concentrations in the atmosphere. 4) Local energy production technologies such as fuel cells, hydrogen, bio-energy and wind energy. 5) Centralized energy technologies such as clean coal technologies. 6) Providing renewable energy for the transport sector. 7) Systems aspects, differences between the various major regions throughout the world. 8) End-use technologies, efficiency improvements and supply links. 9) Security of supply with regard to resources, conflicts, black-outs, natural disasters and terrorism. (au)

  11. Energy, pollution, and economic development in Tunisia

    Directory of Open Access Journals (Sweden)

    Miniar Ben Ammar Sghari

    2016-11-01

    The rising level of energy consumption that is occurring internationally also is being mirrored at regional and national levels. An interesting case study along these lines is Tunisia, which is one of the high-growth economies in the Middle East and North African area yet lacks sufficient energy supply to satisfy its growing demand. Tunisia looks like many nations around the world with a young population, growing economy, increasing domestic energy consumption, and the need to balance economic development with environmental concerns.

  12. Energy solutions for sustainable development. Proceedings

    DEFF Research Database (Denmark)

    The Risø International Energy Conference took place 22 - 24 May 2007. The conference focused on: • Future global energy development options • Scenario and policy issues • Measures to achieve low-level stabilization at, for example, 500 ppm CO2 concentrations in the atmosphere • Local energy produ......, efficiency improvements and supply links • Security of supply with regard to resources, conflicts, black-outs, natural disasters and terrorism...

  13. SOLAR ENERGY POLICY DEVELOPMENTS IN EUROPE

    OpenAIRE

    Mihaela PÃCE?ILÃ

    2015-01-01

    Solar energy is one of the most important renewable energy sources in Europe offering new possibilities to generate electricity and heat. In this context, the study provides accurate information about researches that characterize the solar resource and investigates the potential of solar energy in European countries. The analysis is also focused on the current status of market development including photovoltaic capacity, electricity production from solar photovoltaic power, solar thermal capa...

  14. Wind energy for a sustainable development

    DEFF Research Database (Denmark)

    Karagali, Ioanna; Hasager, Charlotte Bay; Sempreviva, Anna Maria

    2014-01-01

    of both the wind energy related research activities and the wind energy industry, as installed capacity has been increasing in most of the developed and developing countries. The DTU Wind Energy department carries the heritage of the Risø National Laboratory for Sustainable Energy by leading the research......Wind energy is on the forefront of sustainable technologies related to the production of electricity from green sources that combine the efficiency of meeting the demand for growth and the ethical responsibility for environmental protection. The last decades have seen an unprecedented growth...... developments in all sectors related to planning, installing and operating modern wind farms at land and offshore. With as many as 8 sections the department combines specialists at different thematic categories, ranging from meteorology, aeroelastic design and composite materials to electrical grids and test...

  15. Herbaceous energy crop development: recent progress and future prospects.

    Science.gov (United States)

    Heaton, Emily A; Flavell, Richard B; Mascia, Peter N; Thomas, Steven R; Dohleman, Frank G; Long, Stephen P

    2008-06-01

    Oil prices and government mandates have catalyzed rapid growth of nonfossil transportation fuels in recent years, with a large focus on ethanol from energy crops, but the food crops used as first-generation energy crops today are not optimized for this purpose. We show that the theoretical efficiency of conversion of whole spectrum solar energy into biomass is 4.6-6%, depending on plant type, and the best year-long efficiencies realized are about 3%. The average leaf is as effective as the best PV solar cells in transducing solar energy to charge separation (ca. 37%). In photosynthesis, most of the energy that is lost is dissipated as heat during synthesis of biomass. Unlike photovoltaic (PV) cells this energetic cost supports the construction, maintenance, and replacement of the system, which is achieved autonomously as the plant grows and re-grows. Advances in plant genomics are being applied to plant breeding, thereby enabling rapid development of next-generation energy crops that capitalize on theoretical efficiencies while maintaining environmental and economic integrity.

  16. Energy, environment and development in Bhutan

    Energy Technology Data Exchange (ETDEWEB)

    Uddin, Sk Noim; Taplin, Ros [Graduate School of the Environment, Macquarie University, Sydney, NSW 2109 (Australia); Yu, Xiaojiang [Department of Geography, Hong Kong Baptist University, Kowloon (China)

    2007-12-15

    Bhutan's energy and environmental situation and approaches to development are reviewed and analyzed in this paper. Conservation of natural resources and human happiness have been placed as central strategic policy themes and have been given high priority in the national development plans of Bhutan. Bhutan's unique approach to development via Gross National Happiness (GNH) or the Middle Path of development is being facilitated by the Royal Government of Bhutan as a tool to balance poverty alleviation, environmental conservation and development. However, challenges exist due to the constraints of resources, good governance, legal frameworks, and human capacity. This paper reviews selected sustainable energy projects (e.g. energy from renewables or energy conservation) in Bhutan and finds that in fact, Bhutan's renewable energy resources (e.g. water and forests) which have proved to be indispensable for development are vulnerable due to the adverse impacts of climate change and environmental degradation. Appropriate measures in order to reduce potential environmental degradation and mitigate climate change impacts have been acknowledged globally and these have potential for application in Bhutan. For example, implementation of sustainable energy projects under the Clean Development Mechanism (CDM) of the Kyoto Protocol could offer an opportunity for mitigating climate change impacts and also contributing to sustainable development. (author)

  17. Better energy indicators for sustainable development

    Science.gov (United States)

    Taylor, Peter G.; Abdalla, Kathleen; Quadrelli, Roberta; Vera, Ivan

    2017-08-01

    The UN Sustainable Development Goal 7 aims to deliver affordable, reliable, sustainable and modern energy for all. Tracking progress towards the targets under this goal can spur better energy statistics and data gathering capacity, and will require new indicators that also consider the interplay with other goals.

  18. Global Research Alliance (GRA) -Smart sustainable energy for rural community development

    CSIR Research Space (South Africa)

    Szewczuk, S

    2014-03-01

    Full Text Available spider web of infrastructure and dependence on decades-old technologies), the developing world can harness modern, low carbon, renewable, agile, smart and decentralised generation to rapidly deliver tailored, appropriate and sustainable energy...

  19. Energy planning and management in developing countries: thoughts concerning a conceptual framework

    Energy Technology Data Exchange (ETDEWEB)

    Nathans, R.; Palmedo, P.F.

    1977-10-11

    The unique characteristics of the energy situation in developing countries imposes a unique set of requirements on analytical techniques used for energy planning. The urgency of the situation requires the rapid development and use of simplified models which make maximum use of available data but which can reflect the international energy context. Those techniques must also be able to deal with central energy/development issues such as energy equity or the energy implication of social equity policies, centralized vs. decentralized development, and urbanization.

  20. The NEED (National Energy Education Development) Project

    Science.gov (United States)

    Hogan, D.; Spruill, M.

    2012-04-01

    The NEED (National Energy Education Development) Project is a non-profit organization which provides a wide range of K-12 curriculum on energy education topics. The curriculum is specific for primary, elementary, intermediate and secondary levels with age appropriate activities and reading levels. The NEED Project covers a wide range of topics from wind energy, nuclear energy, solar energy, hydropower, hydrogen, fossil fuels, energy conservation, energy efficiency and much more. One of the major strengths of this organization is its Teacher Advisory Board. The curriculum is routinely revised and updated by master classroom teachers who use the lessons and serve on the advisory board. This ensures it is of the highest quality and a useful resource. The NEED Project through a variety of sponsors including businesses, utility companies and government agencies conducts hundreds of teacher professional development workshops each year throughout the United States and have even done some workshops internationally. These workshops are run by trained NEED facilitators. At the workshops, teachers gain background understanding of the energy topics and have time to complete the hands on activities which make up the curriculum. The teachers are then sent a kit of equipment after successfully completing the workshop. This allows them to teach the curriculum and have their students perform the hands on labs and activities in the classroom. The NEED Project is the largest provider of energy education related curriculum in the United States. Their efforts are educating teachers about energy topics and in turn educating students in the hope of developing citizens who are energy literate. Many of the hands on activities used to teach about various energy sources will be described and demonstrated.

  1. Landfill Gas Energy Project Development Handbook

    Science.gov (United States)

    View handbook that provides an overview of LFG energy project development guidance and presents the technological, economic and regulatory considerations that affect the feasibility and success of these projects.

  2. Regulation of geothermal energy development in Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Coe, B.A.; Forman, N.A.

    1980-01-01

    The regulatory system is presented in a format to help guide geothermal energy development. State, local, and federal agencies, legislation, and regulations are presented. Information sources are listed. (MHR)

  3. Development of the Wave Energy Converter

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Frigaard, Peter; Sørensen, Hans Christian

    2000-01-01

    The development of the wave energy converter Wave Dragon (WD) is presented. The WD is based on the overtopping principle. Initially a description of the WD is given. Then the development over time in terms of the various research and development projects working with the concept is described...

  4. Geothermal energy development in the United States

    Science.gov (United States)

    1981-10-01

    Research on geothermal energy utilization is discussed. Topics include: developing a background in geology, hydrology, and reservoir analysis; establishing the marketability of geothermal energy; colocating users with resources; the transfer of technology; and establishing the beginnings of a geothermal industry infrastructure. Legal, institutional, and economic issues were addressed, as well as information exchange and assistance in state planning through the development of state prospectuses and scenarios.

  5. Development of a Rapid Beam Emittance Measurement System using a Real-Time Beam Profile Monitor

    Science.gov (United States)

    Kamakura, Keita; Hatanaka, Kichiji; Fukuda, Mitsuhiro; Yorita, Tetsuhiko; Ueda, Hiroshi; Saito, Takane; Morinobu, Shunpei; Nagayama, Keiichi; Tamura, Hitoshi; Yasuda, Yuusuke

    2016-06-01

    We have developed a rapid beam emittance measurement system for the injection beam of the K140 azimuthally varying field (AVF) cyclotron at Research Center for Nuclear Physics (RCNP). So far, a conventional emittance monitor has been used in a section of a medium energy beam transport (MEBT) system to evaluate the quality of the injected beam to the K400 ring cyclotron. Two kinds of emittance monitors were supplemented in the low energy beam line for evaluation of ion beams from ion sources. One of them is a conventional type consisting of two sets of position-variable slits and a three-wire profile monitor (TPM), similar to the one installed in the MEBT system of the AVF cyclotron. It takes about 30 min to get emittances in both the horizontal and vertical planes. For quick emittance measurements, we have developed a new system equipped with a set of fast moving slits with a fixed gap and a real-time beam profile monitor (BPM83) with a rotating helical wire. With this system the measurement time was considerably reduced to 70 s for both the horizontal and vertical emittances. Moreover the data analysis and graphical processing were completely automated. The overall measurement and analysis time was successfully minimized within 75 s. This rapid emittance measurement system has contributed to improve the beam quality by optimizing parameters of ion sources and the beam transport system.

  6. Renewable Energy Development in Hermosa Beach, California

    Science.gov (United States)

    Morris, K.

    2016-12-01

    The City of Hermosa Beach, California, with the support of the AGU's TEX program, is exploring the potential for renewable energy generation inside the City, as part of the implementation of the City's 2015 Municipal Carbon Neutral Plan. Task 1: Estimate the technical potential of existing and future technologies Given the City's characteristics, this task will identify feasible technologies: wind, solar, tidal/wave, wastewater biogas, landfill biogas, microscale anaerobic digestion (AD), and complementary energy storage. Some options may be open to the City acting alone, but others will require working with municipal partners and private entities that provide services to Hermosa Beach (e.g., wastewater treatment). Energy storage is a means to integrate intermittent renewable energy output. Task 2: Review transaction types and pathways In this task, feasible technologies will be further examined in terms of municipal ordinances and contractual paths: (a) power purchase agreements (PPAs) with developers, under which the City would purchase energy or storage services directly; (b) leases with developers, under which the City would rent sites (e.g., municipal rooftops) to developers; (c) ordinances related to permitting, under which the City would reduce regulatory barriers to entry for developers; (d) pilot projects, under which the City would engage with developers to test new technologies such as wind/wave/microscale AD (pursuant to PPAs and/or leases); and (e) existing projects, under which the City would work with current wastewater and landfill contractors to understand (i) current plans to develop renewable energy, and (ii) opportunities for the City to work with such contractors to promote renewable energy. Task 3: Estimate costs by technology Finally, the last task will gather existing information about the costs, both current and projected, of the feasible technologies, including (i) overnight construction cost (capital); (ii) integration costs (e

  7. Rapid gas development in the Fayetteville shale basin, Arkansas

    Science.gov (United States)

    Advances in drilling and extraction of natural gas have resulted in rapid expansion of wells in shale basins. The rate of gas well installation in the Fayetteville shale is 774 wells a year since 2005 with thousands more planned. The Fayetteville shale covers 23,000 km2 although ...

  8. Development of a potential lignocellulolytic resource for rapid ...

    African Journals Online (AJOL)

    This study was conducted at the Laboratory of Food Crops and Floriculture, Institute of Tropical Agriculture, Universiti Putra Malaysia to characterize the potential lignocellulolytic bacteria for rapid bio-bioconversion of rice straw. Fifty isolates of bacteria were isolated from several in-situ and in-vitro sources. Isolates B3, B13 ...

  9. Developing Collective Learning Extension for Rapidly Evolving Information System Courses

    Science.gov (United States)

    Agarwal, Nitin; Ahmed, Faysal

    2017-01-01

    Due to rapidly evolving Information System (IS) technologies, instructors find themselves stuck in the constant game of catching up. On the same hand students find their skills obsolete almost as soon as they graduate. As part of IS curriculum and education, we need to emphasize more on teaching the students "how to learn" while keeping…

  10. Development of rapid phenotypic system for the identification of ...

    Indian Academy of Sciences (India)

    Rapid and accurate identification of bacterial pathogens is a fundamental goal of clinical microbiology. The diagnosis and surveillance of diseases is dependent, to a great extent, on laboratory services, which cannot function without effective reliable reagents and diagnostics. Despite the advancement in microbiology ...

  11. Energy-conserving development regulations: current practice

    Energy Technology Data Exchange (ETDEWEB)

    1980-05-01

    Almost every aspect of land development has an effect on energy use, from minute architectural details to broad considerations of urban density. Energy-efficiency depends in part on how development is planned and carried out. Conventional development regulations, such as zoning ordinances and subdivision regulations, can be adapted in many ways to promote energy conservation at the community level. This report is about energy-efficient site and neighborhood design. It examines recent experiences of local governments that have adopted new development regulations or amended existing ones to promote energy conservation, more efficient generation and distribution, or a switch to alternative, renewable sources. Although much has been written in recent years about saving energy through community design, actual experience in applying these new ideas is still limited. To date, most communities have focused their efforts on studying the problem, documenting consumption patterns, and writing reports and plans. Only a handful have amended their land-use controls for the express purpose of saving energy. This study identifies 13 of these pioneering communities, after undertaking a survey of over 1400 local, regional, and state planning agencies. It takes a look at their experiences, to learn what has been done, how well it has worked, and what problems have been encountered.

  12. An energy-economy-environment model for simulating the impacts of socioeconomic development on energy and environment.

    Science.gov (United States)

    Wang, Wenyi; Zeng, Weihua; Yao, Bo

    2014-01-01

    Many rapidly developing regions have begun to draw the attention of the world. Meanwhile, the energy and environmental issues associated with rapid economic growth have aroused widespread critical concern. Therefore, studying energy, economic, and environmental systems is of great importance. This study establishes a system dynamic model that covers multiple aspects of those systems, such as energy, economy, population, water pollution, air pollution, solid waste, and technology. The model designed here attempts to determine the impacts of socioeconomic development on the energy and environment of Tongzhou District in three scenarios: under current, planning, and sustainable conditions. The results reveal that energy shortages and water pollutions are very serious and are the key issues constraining future social and economic development. Solid waste emissions increase with population growth. The prediction results provide valuable insights into social advancement.

  13. An Energy-Economy-Environment Model for Simulating the Impacts of Socioeconomic Development on Energy and Environment

    Directory of Open Access Journals (Sweden)

    Wenyi Wang

    2014-01-01

    Full Text Available Many rapidly developing regions have begun to draw the attention of the world. Meanwhile, the energy and environmental issues associated with rapid economic growth have aroused widespread critical concern. Therefore, studying energy, economic, and environmental systems is of great importance. This study establishes a system dynamic model that covers multiple aspects of those systems, such as energy, economy, population, water pollution, air pollution, solid waste, and technology. The model designed here attempts to determine the impacts of socioeconomic development on the energy and environment of Tongzhou District in three scenarios: under current, planning, and sustainable conditions. The results reveal that energy shortages and water pollutions are very serious and are the key issues constraining future social and economic development. Solid waste emissions increase with population growth. The prediction results provide valuable insights into social advancement.

  14. Advanced Energy Industries, Inc. SEGIS developments.

    Energy Technology Data Exchange (ETDEWEB)

    Scharf, Mesa P. (Advanced Energy Industries, Inc., Bend, OR); Bower, Ward Isaac; Mills-Price, Michael A. (Advanced Energy Industries, Inc., Bend, OR); Sena-Henderson, Lisa; David, Carolyn; Akhil, Abbas Ali; Kuszmaul, Scott S.; Gonzalez, Sigifredo

    2012-03-01

    The Solar Energy Grid Integration Systems (SEGIS) initiative is a three-year, three-stage project that includes conceptual design and market analysis (Stage 1), prototype development/testing (Stage 2), and commercialization (Stage 3). Projects focus on system development of solar technologies, expansion of intelligent renewable energy applications, and connecting large-scale photovoltaic (PV) installations into the electric grid. As documented in this report, Advanced Energy Industries, Inc. (AE), its partners, and Sandia National Laboratories (SNL) successfully collaborated to complete the final stage of the SEGIS initiative, which has guided new technology development and development of methodologies for unification of PV and smart-grid technologies. The combined team met all deliverables throughout the three-year program and commercialized a broad set of the developed technologies.

  15. Wind Energy Workforce Development: Engineering, Science, & Technology

    Energy Technology Data Exchange (ETDEWEB)

    Lesieutre, George A.; Stewart, Susan W.; Bridgen, Marc

    2013-03-29

    Broadly, this project involved the development and delivery of a new curriculum in wind energy engineering at the Pennsylvania State University; this includes enhancement of the Renewable Energy program at the Pennsylvania College of Technology. The new curricula at Penn State includes addition of wind energy-focused material in more than five existing courses in aerospace engineering, mechanical engineering, engineering science and mechanics and energy engineering, as well as three new online graduate courses. The online graduate courses represent a stand-alone Graduate Certificate in Wind Energy, and provide the core of a Wind Energy Option in an online intercollege professional Masters degree in Renewable Energy and Sustainability Systems. The Pennsylvania College of Technology erected a 10 kilowatt Xzeres wind turbine that is dedicated to educating the renewable energy workforce. The entire construction process was incorporated into the Renewable Energy A.A.S. degree program, the Building Science and Sustainable Design B.S. program, and other construction-related coursework throughout the School of Construction and Design Technologies. Follow-on outcomes include additional non-credit opportunities as well as secondary school career readiness events, community outreach activities, and public awareness postings.

  16. Energy and durable development: the place of the renewable energies; Energie et developpement durable: la place des energies renouvelables

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The 29 may 2000, took place at the UNESCO, a colloquium on the place of the renewable energies facing the economic development. This document presents the opening presentation of A. Antolini and L. Jospin and the colloquium papers and debates in the following four domains: the energy challenges of the durable development, the renewable energies sources facing the european directive, the thermal renewable energies (solar, geothermics and biomass) and the greenhouse effect, the world market of the renewable energies. (A.L.B.)

  17. Wind energy curriculum development at GWU

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, Stephen M [GWU

    2013-06-08

    A wind energy curriculum has been developed at the George Washington University, School of Engineering and Applied Science. Surveys of student interest and potential employers expectations were conducted. Wind industry desires a combination of mechanical engineering training with electrical engineering training. The curriculum topics and syllabus were tested in several graduate/undergraduate elective courses. The developed curriculum was then submitted for consideration.

  18. Developing sustainable energy policies for electrical energy conservation in Saudi Arabia

    Energy Technology Data Exchange (ETDEWEB)

    Al-Ajlan, S.A. [Energy Research Institute, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442 (Saudi Arabia)]. E-mail: salajlan@kacst.edu.sa; Al-Ibrahim, A.M. [Energy Research Institute, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442 (Saudi Arabia); Abdulkhaleq, M. [Ministry of Water and Electricity (Saudi Arabia); Alghamdi, F. [Ministry of Water and Electricity (Saudi Arabia)

    2006-09-15

    Towards the end of 1998, the Saudi Arabian electricity sector embarked upon a major restructuring program. One of the aims of the program is to achieve sustainable performance. Although progress has been made, a number of challenges remain, including high demand growth, low generation capacity reserve margins, inefficient energy use, absence of time-of-use tariffs, and the need for large capital investments to meet current and future expansion. Electrical energy consumption in Saudi Arabia increased sharply during the last two decades due to rapid economic development and the absence of energy conservation measures. Peak loads reached nearly 24GW in 2001-25 times their 1975 level-and are expected to approach 60GW by 2023. The total investment needed to meet this demand may exceed $90 billion. Consequently, there is an urgent need to develop energy conservation policies for sustainable development. Current sustainable policies, particularly those pertaining to energy conservation, led to peak load savings of more than 871MW in 2001, mainly as a result of collaborations between the Ministry of Water and Electricity and the Saudi Electricity Company. In the long term, however, unless sustainable energy policies are developed at a national level, such efforts will be largely ineffective. To address this, policies and programs are being developed for public awareness, energy regulation and legislation, and energy information and programming. If energy conservation is taken into account, the forecast demand can be reduced by 5-10%. This is equivalent to 3-6GW of additional capacity, which represents a possible $1.5-3.0 billion saving over the next 20 years. Typically, investment in energy efficiency is 1% of utility sales revenues, which for a country like Saudi Arabia could be $15-60 million p.a. If only savings on air conditioning are considered, the return on investment is equivalent to 400-500MW p.a. of generating capacity-a saving of up to $0.25 billion p.a. In this

  19. Energy technology progress for sustainable development

    Energy Technology Data Exchange (ETDEWEB)

    Arvizu, D.E.; Drennen, T.E.

    1997-03-01

    Energy security is a fundamental part of a country`s national security. Access to affordable, environmentally sustainable energy is a stabilizing force and is in the world community`s best interest. The current global energy situation however is not sustainable and has many complicating factors. The primary goal for government energy policy should be to provide stability and predictability to the market. This paper differentiates between short-term and long-term issues and argues that although the options for addressing the short-term issues are limited, there is an opportunity to alter the course of long-term energy stability and predictability through research and technology development. While reliance on foreign oil in the short term can be consistent with short-term energy security goals, there are sufficient long-term issues associated with fossil fuel use, in particular, as to require a long-term role for the federal government in funding research. The longer term issues fall into three categories. First, oil resources are finite and there is increasing world dependence on a limited number of suppliers. Second, the world demographics are changing dramatically and the emerging industrialized nations will have greater supply needs. Third, increasing attention to the environmental impacts of energy production and use will limit supply options. In addition to this global view, some of the changes occurring in the US domestic energy picture have implications that will encourage energy efficiency and new technology development. The paper concludes that technological innovation has provided a great benefit in the past and can continue to do so in the future if it is both channels toward a sustainable energy future and if it is committed to, and invested in, as a deliberate long-term policy option.

  20. ENERGY AND SUSTAINABLE DEVELOPMENT IN CUBA

    Directory of Open Access Journals (Sweden)

    Debrayan Bravo Hidalgo

    2015-10-01

    Full Text Available Employment and enhancing the use of renewable energy sources could be considered as the beginning of a third ¨Industrial Revolution¨. The transition to a low carbon dioxide emission permits to a momentous turning point in the fight against climate change, improve energy security, and last but not least, significantly reduce the geopolitical intentions of this. The increase in renewable sources constitutes a guideline for energy policy in Cuba. Thus, programs for the construction of small hydropower plants, plant cells and photovoltaic panels, solar thermal energy systems for various services are developed; and the use of other primary sources such as wind and biomass. This work shows the implementation of these practices in the nation, the present results and future aspirations facing the demands of sustainable and steady development of generation and power consumption.

  1. New developments in high energy physics

    Energy Technology Data Exchange (ETDEWEB)

    Neal, H.A.

    1977-01-01

    Some of the important developments in the field of high energy physics are reviewed. Starting from the status of knowledge of the structure of matter the details of experiments leading to the discovery of charmed particles and psi resonances are emphasized. Also some of the areas of activity of the Indiana University High Energy group are reviewed and related to the principal unsolved problems in the field. (JFP)

  2. Great Plains Wind Energy Transmission Development Project

    Energy Technology Data Exchange (ETDEWEB)

    Brad G. Stevens, P.E.; Troy K. Simonsen; Kerryanne M. Leroux

    2012-06-09

    In fiscal year 2005, the Energy & Environmental Research Center (EERC) received funding from the U.S. Department of Energy (DOE) to undertake a broad array of tasks to either directly or indirectly address the barriers that faced much of the Great Plains states and their efforts to produce and transmit wind energy at the time. This program, entitled Great Plains Wind Energy Transmission Development Project, was focused on the central goal of stimulating wind energy development through expansion of new transmission capacity or development of new wind energy capacity through alternative market development. The original task structure was as follows: Task 1 - Regional Renewable Credit Tracking System (later rescoped to Small Wind Turbine Training Center); Task 2 - Multistate Transmission Collaborative; Task 3 - Wind Energy Forecasting System; and Task 4 - Analysis of the Long-Term Role of Hydrogen in the Region. As carried out, Task 1 involved the creation of the Small Wind Turbine Training Center (SWTTC). The SWTTC, located Grand Forks, North Dakota, consists of a single wind turbine, the Endurance S-250, on a 105-foot tilt-up guyed tower. The S-250 is connected to the electrical grid on the 'load side' of the electric meter, and the power produced by the wind turbine is consumed locally on the property. Establishment of the SWTTC will allow EERC personnel to provide educational opportunities to a wide range of participants, including grade school through college-level students and the general public. In addition, the facility will allow the EERC to provide technical training workshops related to the installation, operation, and maintenance of small wind turbines. In addition, under Task 1, the EERC hosted two small wind turbine workshops on May 18, 2010, and March 8, 2011, at the EERC in Grand Forks, North Dakota. Task 2 involved the EERC cosponsoring and aiding in the planning of three transmission workshops in the midwest and western regions. Under Task

  3. Development of technologies for solar energy utilization

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    With relation to the development of photovoltaic power systems for practical use, studies were made on thin-substrate polycrystalline solar cells and thin-film solar cells as manufacturing technology for solar cells for practical use. The technological development for super-high efficiency solar cells was also being advanced. Besides, the research and development have been conducted of evaluation technology for photovoltaic power systems and systems to utilize the photovoltaic power generation and peripheral technologies. The demonstrative research on photovoltaic power systems was continued. The international cooperative research on photovoltaic power systems was also made. The development of a manufacturing system for compound semiconductors for solar cells was carried out. As to the development of solar energy system technologies for industrial use, a study of elemental technologies was first made, and next the development of an advanced heat process type solar energy system was commenced. In addition, the research on passive solar systems was made. An investigational study was carried out of technologies for solar cities and solar energy snow melting systems. As international joint projects, studies were made of solar heat timber/cacao drying plants, etc. The paper also commented on projects for international cooperation for the technological development of solar energy utilization systems. 26 figs., 15 tabs.

  4. Regulatory standards related to building energy conservation and indoor-air-quality during rapid urbanization in China

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Z.; Bai, Z.; Yu, H.; Zhu, T. [Nankai Univ., Tianjin (China). College of Environmental Sciences and Engineering; Zhang, J. [University of Medicine and Dentistry of New Jersey and Rutgers Univ., Piscataway, NJ (United States)

    2004-12-01

    The number of airtight buildings equipped with air-conditioning units along with levels of energy consumption from residential and commercial buildings has both increased markedly in China since 1990 due to rapid economic growth and urbanization. During this same period, home refurbishment/decoration/remodeling activities in newly constructed or existing apartments have become very popular and brought attention to a wide range of health concerns. This paper reviews building energy-saving and indoor-air-quality (IAQ) related standards in China. In summary, the two systems of building energy-saving and IAQ-related standards have been already established separately, although Chinese IAQ standards contain some indices related to building ventilation and energy (e.g. fresh air volume, relative humidity, and temperature). Building energy-saving systems are applicable to buildings existing in a wide range of climatic conditions. Formaldehyde was selected as a pollution index in ''Chinese Evaluation Handbook of Ecological Residence Technology'' (promulgated in 2001) for buildings mainly contaminated with harmful compounds emitted from interior decorating materials. As part of its IAQ control strategy, China promulgated a series of IAQ-related standards and compulsory national standards for limits of harmful substances contained in interior decorative materials (LHSCIDM), which placed strong emphasis on source control. When enacting the IAQ-related standards, China adopted some of the standards used in developed countries and related international standards for reference. (author)

  5. Regulatory standards related to building energy conservation and indoor-air-quality during rapid urbanisation in China

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Z.; Bai, Z.; Yu, H.; Zhu, T. [College of Environmental Sciences and Engineering, Nankai University, Tianjin (China); Zhang, J. [Environmental and Occupational Health Sciences Institute, and University of Medicine and Dentistry of New Jersey, and Rutgers University, Piscataway, NJ (United States)

    2004-07-01

    The number of airtight buildings equipped with air-conditioning units along with levels of energy consumption from residential and commercial buildings has both increased markedly in China since 1990 due to rapid economic growth and urbanization. During this same period, home refurbishment/decoration/remodeling activities in newly constructed or existing apartments have become very popular and brought attention to a wide range of health concerns. This paper reviews building energy-saving and indoor-air-quality (IAQ) related standards in China. In summary, the two systems of building energy-saving and IAQ-related standards have been already established separately, although Chinese IAQ standards contain some indices related to building ventilation and energy (e.g. fresh air volume, relative humidity, and temperature). Building energy-saving systems are applicable to buildings existing in a wide range of climatic conditions. Formaldehyde was selected as a pollution index in 'Chinese Evaluation Handbook of Ecological Residence Technology' (promulgated in 2001) for buildings mainly contaminated with harmful compounds emitted from interior decorating materials. As part of its IAQ control strategy, China promulgated a series of IAQ-related standards and compulsory national standards for limits of harmful substances contained in interior decorative materials (LHSCIDM), which placed strong emphasis on source control. When enacting the IAQ-related standards, China adopted some of the standards used in developed countries and related international standards for reference. (author)

  6. Developing a Rapid Algorithm to Enable Rapid Characterization of Alginate Microcapsules

    OpenAIRE

    Chan, Ka Hei; Krishnan, Rahul; Alexander, Michael; Lakey, Jonathan R. T.

    2017-01-01

    The islets of Langerhans are endocrine tissue clusters that secrete hormones that regulate the body's glucose, carbohydrate, and fat metabolism, the most important of which is insulin, a hormone secreted by β-cells within the islets. In certain instances, a person's own immune system attacks and destroys them, leading to the development of type 1 diabetes (T1D), a life-long condition that needs daily insulin administration to maintain health and prolong survival. Islet transplantation is a su...

  7. Future energy demand in Laos. Scenario alternatives for development

    Energy Technology Data Exchange (ETDEWEB)

    Luukkanen, J.; Kouphokham, K.; Panula-Ontto, J. [and others

    2012-07-01

    Energy production in Laos is still dominated by traditional fuels. Fuelwood in the main source of energy and most of the energy is consumed at households for cooking. Increase in the number of cars and motorbikes is rapidly increasing the use of imported petroleum products. Electrification is one of the central targets of the Lao government. The electrification rate has increased fast in Laos and in the year 2010 over 70 % households had electricity supply. The target is to have 90 % access to electricity by the year 2020. The World Bank regards the electrification of Lao PDR to be a success story. This paper deals with the present and future energy consumption in Laos. First the historical trends of energy use in different sectors are analysed. The future scenarios are constructed using LaoLinda model. Four different future alternative development paths are analysed using the model results. The energy use data source for the analysis is from the Ministry of Energy and Mines (MEM) of Lao PDR. Economic and other data is from the Department of Statistics of Lao PDR.

  8. Rapid Determination of Biochar Energy Quality Based on Visible and Near-infrared Spectroscopy (400-1000nm

    Directory of Open Access Journals (Sweden)

    Yang Hai-Qing

    2016-01-01

    Full Text Available Rapid determination of biochar energy quality is fundamental for the purpose of biomass efficient utilization. In this work, visible and near-infrared spectroscopy was used to measure ash, volatile matter, fixed carbon content and calorific value of biochar samples produced at different pyrolysis temperatures from agricultural biomass feedstocks. Biochar samples were detected by a USB4000 spectrometer with 400-1000nm reflectance spectra recorded for investigation. The spectra were transformed by Savitzky-Golay smoothing followed by baseline offset correction (BOC. The BOC-transformed spectra of calibration set were subjected to a partial least squares regression (PLSR algorithm for obtaining a PLSR calibration model for each biochar property. Prediction result shows that the PLSR models developed for 400-1000nm spectra achieve good prediction performance with coefficient of determination (R2 of 0.85, 0.86, 0.87 and residual prediction deviation (RPD of 2.61, 2.64, 2.85 for ash, volatile matter and fixed carbon content, respectively. For the prediction of biochar calorific value, the PLSR model developed for 400-780nm spectra performs better with R2 of 0.82 and RPD of 2.51 compared with the 400-1000nm spectra. It is suggested that biochar energy quality can be rapidly measured with acceptable accuracy based on a 400-1000nm spectrum which can be obtained by a low-cost spectrometer.

  9. CGC/saturation approach for soft interactions at high energy: long range rapidity correlations

    Energy Technology Data Exchange (ETDEWEB)

    Gotsman, E.; Maor, U. [Tel Aviv University, Department of Particle Physics, School of Physics and Astronomy, Raymond and Beverly Sackler Faculty of Exact Science, Tel Aviv (Israel); Levin, E. [Tel Aviv University, Department of Particle Physics, School of Physics and Astronomy, Raymond and Beverly Sackler Faculty of Exact Science, Tel Aviv (Israel); Universidad Tecnica Federico Santa Maria and Centro Cientifico- Tecnologico de Valparaiso, Departemento de Fisica, Valparaiso (Chile)

    2015-11-15

    In this paper we continue our program to construct a model for high energy soft interactions that is based on the CGC/saturation approach. The main result of this paper is that we have discovered a mechanism that leads to large long range rapidity correlations and results in large values of the correlation function R(y{sub 1}, y{sub 2}) ≥ 1, which is independent of y{sub 1} and y{sub 2}. Such a behavior of the correlation function provides strong support for the idea that at high energies the system of partons that is produced is not only dense but also has strong attractive forces acting between the partons. (orig.)

  10. High power free space optical link for rapid energy and data transmission

    Science.gov (United States)

    Dhadwal, Harbans S.; Rastegar, Jahangir; Feng, Dake; Kwok, Philip

    2016-05-01

    Design and experimental data for a high power laser diode based free space point-to-point optical power/data link is presented. In time critical power up applications, such as providing power and guidance information to a munition shell just prior to deployment, energy of the order of 100 J needs to be transferred in under 10 s. Current inductive technology is slow and broadcasts a radio-frequency signal which is undesirable for stealth operation. Rapid energy transfer times require high irradiance levels at the surface of the photovoltaic cells, typically, exceeding 1000X suns. Through efficient thermal design of heat sinks, high optical to electrical power conversion efficiencies of 50%, which are usually attainable at low power levels of 1 W, are achievable at higher power levels.

  11. Journal of Renewable Energy and Sustainable Development

    Directory of Open Access Journals (Sweden)

    Yasser Gaber Dessouky

    2015-08-01

    Full Text Available Energy is one of the basic needs of humanity and, for ages, the sun seemed to be the main source ofall energy in the universe and that is why the ancient Egyptians used to venerate it. Many wastes andcorpses – under pressure and heat – have been converted throughout the years inside the earth intothe oil on which recent development is totally based to support humans’ life, particularly intransportation and power generation. As time passes, it has been proven that oil will vanish. For thefirst moment, it seemed like mankind will certainly suffer due to such a hard situation and some peoplethought that we will get back to stone ages when oil no longer exists. Thanks for the Renewable Energy scientist who has looked at the issue from a different prospective,that is, even if oil vanishes, the main reason of its existence is still there, that is the sun . The sun has the capability to still make people enjoy their life not only by enjoying the sunny weatherin many places of the world and having good times on the beach for those who live by the sea but alsothe sun can still provide man with required energy and cause the wind to blow, the waves to raise, theplants to be converted to biomass, and the earth to store its geothermal energy. As long as life goes on, the sun will always rise and will always grant its energy to mankind. It is theclean, renewable and sustainable energy, which guarantees sustainable development. Because of the high correlation between renewable energy and sustainable development, the editorialteam of this journal thought of offering a hub to researchers interested in these two important fields topresent their work and share it with others who have the same interest in such a wide area ofresearch . Thanks to the Academy Publishing Center, ‘APC’ owned by the Arab Academy for Science,Technology and Maritime Transport ‘AASTMT’ for hosting this international journal .

  12. Analysis of the Energy Balance of Shale Gas Development

    Directory of Open Access Journals (Sweden)

    Hiroaki Yaritani

    2014-04-01

    Full Text Available Interest has rapidly grown in the use of unconventional resources to compensate for depletion of conventional hydrocarbon resources (“easy hydrocarbon” that are produced at relatively low cost from oil and gas fields with large proven reserves. When one wants to ensure the prospects for development of unconventional resources that are potentially vast in terms of their energy potential, it is essential to determine the quality of that energy. Here we consider the development of shale gas, an unconventional energy resource of particularly strong interest of late, through analysis of its energy return on investment (EROI, a key indicator for qualitative assessment of energy resources. We used a Monte Carlo approach for the carbon footprint of U.S. operations in shale gas development to estimate expected ranges of EROI values by incorporating parameter variability. We obtained an EROI of between 13 and 23, with a mean of approximately 17 at the start of the pipeline. When we incorporated all the costs required to bring shale gas to the consumer, the mean value of EROI drops from about 17 at the start of the pipeline to 12 when delivered to the consumer. The shale gas EROI values estimated in the present study are in the initial stage of shale gas exploitation where the quality of that resource may be considerably higher than the mean and thus the careful and continuous investigation of change in EROI is needed, especially as production moves off the initial “sweet spots”.

  13. Rapid peptide based diagnosis: peptide-based Fluorescence Resonance Energy Transfer (FRET) protease substrates for the detection and diagnosis of bacillus spp

    NARCIS (Netherlands)

    Bikker, F.J.; Kaman, W.E.

    2014-01-01

    We describe the development of a highly specific protease-based Fluorescence Resonance Energy Transfer (FRET) assay for easy and rapid detection both in vitro and in vivo of Bacillus spp, including Bacillus anthracis. Synthetic substrates for B. anthracis proteases were designed and exposed to

  14. Energy Flow and Rapidity Gaps Between Jets in Photoproduction at HERA

    CERN Document Server

    Adloff, C.; Andrieu, B.; Anthonis, T.; Arkadov, V.; Astvatsatourov, A.; Babaev, A.; Bahr, J.; Baranov, P.; Barrelet, E.; Bartel, W.; Bate, P.; Becker, J.; Beglarian, A.; Behnke, O.; Beier, C.; Belousov, A.; Benisch, T.; Berger, C.; Berndt, T.; Bizot, J.C.; Boehme, J.; Boudry, V.; Braunschweig, W.; Brisson, V.; Broker, H.B.; Brown, D.P.; Bruckner, W.; Bruncko, D.; Burger, J.; Busser, F.W.; Bunyatyan, A.; Burrage, A.; Buschhorn, G.; Bystritskaya, L.; Campbell, A.J.; Cao, Jun; Caron, S.; Cassol-Brunner, F.; Clarke, D.; Collard, C.; Contreras, J.G.; Coppens, Y.R.; Coughlan, J.A.; Cousinou, M.C.; Cox, B.E.; Cozzika, G.; Cvach, J.; Dainton, J.B.; Dau, W.D.; Daum, K.; Davidsson, M.; Delcourt, B.; Delerue, N.; Demirchyan, R.; De Roeck, A.; De Wolf, E.A.; Diaconu, C.; Dingfelder, J.; Dixon, P.; Dodonov, V.; Dowell, J.D.; Droutskoi, A.; Dubak, A.; Duprel, C.; Eckerlin, Guenter; Eckstein, D.; Efremenko, V.; Egli, S.; Eichler, R.; Eisele, F.; Eisenhandler, E.; Ellerbrock, M.; Elsen, E.; Erdmann, M.; Erdmann, W.; Faulkner, P.J.W.; Favart, L.; Fedotov, A.; Felst, R.; Ferencei, J.; Ferron, S.; Fleischer, M.; Fleming, Y.H.; Flugge, G.; Fomenko, A.; Foresti, I.; Formanek, J.; Franke, G.; Gabathuler, E.; Gabathuler, K.; Garvey, J.; Gassner, J.; Gayler, Joerg; Gerhards, R.; Gerlich, C.; Ghazaryan, Samvel; Goerlich, L.; Gogitidze, N.; Grab, C.; Grassler, H.; Greenshaw, T.; Grindhammer, Guenter; Hadig, T.; Haidt, D.; Hajduk, L.; Haller, J.; Haynes, W.J.; Heinemann, B.; Heinzelmann, G.; Henderson, R.C.W.; Hengstmann, S.; Henschel, H.; Heremans, R.; Herrera, G.; Herynek, I.; Hildebrandt, M.; Hilgers, M.; Hiller, K.H.; Hladky, J.; Hoting, P.; Hoffmann, D.; Horisberger, R.; Hurling, S.; Ibbotson, M.; Issever, C .; Jacquet, M.; Jaffre, M.; Janauschek, L.; Janssen, X.; Jemanov, V.; Jonsson, L.; Johnson, C.; Johnson, D.P.; Jones, M.A.S.; Jung, H.; Kant, D.; Kapichine, M.; Karlsson, M.; Karschnick, O.; Keil, F.; Keller, N.; Kennedy, J.; Kenyon, I.R.; Kermiche, S.; Kiesling, Christian M.; Kjellberg, P.; Klein, M.; Kleinwort, C.; Kluge, T.; Knies, G.; Koblitz, B.; Kolya, S.D.; Korbel, V.; Kostka, P.; Kotelnikov, S.K.; Koutouev, R.; Koutov, A.; Krehbiel, H.; Kroseberg, J.; Kruger, K.; Kupper, A.; Kuhr, T.; Kurca, T.; Lamb, D.; Landon, M.P.J.; Lange, W.; Lastovicka, T.; Laycock, P.; Lebailly, E.; Lebedev, A.; Leissner, B.; Lemrani, R.; Lendermann, V.; Levonian, S.; Lindstroem, M.; List, B.; Lobodzinska, E.; Lobodzinski, B.; Loginov, A.; Loktionova, N.; Lubimov, V.; Luders, S.; Luke, D.; Lytkin, L.; Mahlke-Kruger, H.; Malden, N.; Malinovski, E.; Malinovski, I.; Maracek, R.; Marage, P.; Marks, J.; Marshall, R.; Martyn, H.U.; Martyniak, J.; Maxfield, S.J.; Meer, D.; Mehta, A.; Meier, K.; Meyer, A.B.; Meyer, H.; Meyer, J.; Meyer, P.O.; Mikocki, S.; Milstead, D.; Mkrtchyan, T.; Mohr, R.; Mohrdieck, S.; Mondragon, M.N.; Moreau, F.; Morozov, A.; Morris, J.V.; Muller, K.; Murin, P.; Nagovizin, V.; Naroska, B.; Naumann, J.; Naumann, T.; Nellen, G.; Newman, Paul R.; Nicholls, T.C.; Niebergall, F.; Niebuhr, C.; Nix, O.; Nowak, G.; Olsson, J.E.; Ozerov, D.; Panassik, V.; Pascaud, C.; Patel, G.D.; Peez, M.; Perez, E.; Phillips, J.P.; Pitzl, D.; Poschl, R.; Potachnikova, I.; Povh, B.; Radel, G.; Rauschenberger, J.; Reimer, P.; Reisert, B.; Reyna, D.; Risler, C.; Rizvi, E.; Robmann, P.; Roosen, R.; Rostovtsev, A.; Rusakov, S.; Rybicki, K.; Sankey, D.P.C.; Schatzel, S.; Scheins, J.; Schilling, F.P.; Schleper, P.; Schmidt, D.; Schmidt, S.; Schmitt, S.; Schneider, M.; Schoeffel, L.; Schoning, A.; Schorner, T.; Schroder, V.; Schultz-Coulon, H.C.; Schwanenberger, C.; Sedlak, K.; Sefkow, F.; Chekelian, V.; Sheviakov, I.; Shtarkov, L.N.; Sirois, Y.; Sloan, T.; Smirnov, P.; Soloviev, Y.; South, D.; Spaskov, V.; Specka, Arnd E.; Spitzer, H.; Stamen, R.; Stella, B.; Stiewe, J.; Straumann, U.; Swart, M.; Tasevsky, M.; Tchetchelnitski, S.; Thompson, Graham; Thompson, P.D.; Tobien, N.; Traynor, D.; Truoel, Peter; Tsipolitis, G.; Tsurin, I.; Turnau, J.; Turney, J.E.; Tzamariudaki, E.; Udluft, S.; Urban, Marcel; Usik, A.; Valkar, S.; Valkarova, A.; Vallee, C.; Van Mechelen, P.; Vassiliev, S.; Vazdik, Y.; Vichnevski, A.; Wacker, K.; Wagner, J.; Wallny, R.; Waugh, B.; Weber, G.; Weber, M.; Wegener, D.; Werner, C.; Werner, M.; Werner, N.; Wessels, M.; White, G.; Wiesand, S.; Wilksen, T.; Winde, M.; Winter, G.G.; Wissing, C.; Wobisch, M.; Woehrling, E.E.; Wunsch, E.; Wyatt, A.C.; Zacek, J.; Zalesak, J.; Zhang, Z.; Zhokin, A.; Zomer, F.; zur Nedden, M.

    2002-01-01

    Dijet events in photon-proton collisions in which there is a large pseudorapidity separation Delta eta > 2.5 between the two highest E_T jets are studied with the H1 detector at HERA. The inclusive dijet cross sections are measured as functions of the longitudinal momentum fractions of the proton and photon which participate in the production of the jets, x_pjet and x_gjet respectively, Delta eta, the pseudorapidity separation between the two highest E_T jets, and E_T^gap, the total summed transverse energy between the jets. Rapidity gap events are defined as events in which E_T^gap is less than E_T^cut, for E_T^cut varied between 0.5 and 2.0 GeV. The fraction of dijet events with a rapidity gap is measured differentially in Delta eta, x_pjet and x_gjet. An excess of events with rapidity gaps at low values of E_T^cut is observed above the expectation from standard photoproduction processes. This excess can be explained by the exchange of a strongly interacting colour singlet object between the jets.

  15. Developing a Rapid Algorithm to Enable Rapid Characterization of Alginate Microcapsules.

    Science.gov (United States)

    Chan, Ka Hei; Krishnan, Rahul; Alexander, Michael; Lakey, Jonathan R T

    2017-05-09

    The islets of Langerhans are endocrine tissue clusters that secrete hormones that regulate the body's glucose, carbohydrate, and fat metabolism, the most important of which is insulin, a hormone secreted by β-cells within the islets. In certain instances, a person's own immune system attacks and destroys them, leading to the development of type 1 diabetes (T1D), a life-long condition that needs daily insulin administration to maintain health and prolong survival. Islet transplantation is a surgical procedure that has demonstrated the ability to normalize blood sugar levels for up to a few years, but the need for chronic immunosuppression relegates it to a last resort that is often only used sparingly and in seriously ill patients. Islet microencapsulation is a biomedical innovation designed to protect islets from the immune system by coating them with a biocompatible polymer, and this new technology has demonstrated various degrees of success in small- and large-animal studies. This success is significantly impacted by microcapsule morphology and encapsulation efficiency. Since hundreds of thousands of microcapsules are generated during the process, characterization of encapsulated islets without the help of some degree of automation would be difficult, time-consuming, and error prone due to inherent observer bias. We have developed an image analysis algorithm that can analyze hundreds of microencapsulated islets and characterize their size, shape, circularity, and distortion with minimal observer bias. This algorithm can be easily adapted to similar nano- or microencapsulation technologies to implement stricter quality control and improve biomaterial device design and success.

  16. Developing a Rapid Algorithm to Enable Rapid Characterization of Alginate Microcapsules

    Science.gov (United States)

    Chan, Ka Hei; Krishnan, Rahul; Alexander, Michael; Lakey, Jonathan R. T.

    2017-01-01

    The islets of Langerhans are endocrine tissue clusters that secrete hormones that regulate the body's glucose, carbohydrate, and fat metabolism, the most important of which is insulin, a hormone secreted by β-cells within the islets. In certain instances, a person's own immune system attacks and destroys them, leading to the development of type 1 diabetes (T1D), a life-long condition that needs daily insulin administration to maintain health and prolong survival. Islet transplantation is a surgical procedure that has demonstrated the ability to normalize blood sugar levels for up to a few years, but the need for chronic immunosuppression relegates it to a last resort that is often only used sparingly and in seriously ill patients. Islet microencapsulation is a biomedical innovation designed to protect islets from the immune system by coating them with a biocompatible polymer, and this new technology has demonstrated various degrees of success in small- and large-animal studies. This success is significantly impacted by microcapsule morphology and encapsulation efficiency. Since hundreds of thousands of microcapsules are generated during the process, characterization of encapsulated islets without the help of some degree of automation would be difficult, time-consuming, and error prone due to inherent observer bias. We have developed an image analysis algorithm that can analyze hundreds of microencapsulated islets and characterize their size, shape, circularity, and distortion with minimal observer bias. This algorithm can be easily adapted to similar nano- or microencapsulation technologies to implement stricter quality control and improve biomaterial device design and success. PMID:27729095

  17. Healthcare Energy Efficiency Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    Black, Douglas R.; Lai, Judy; Lanzisera, Steven M; Parrish, Kristen D.; Singer, Brett C.

    2011-01-31

    Hospitals are known to be among the most energy intensive commercial buildings in California. Estimates of energy end-uses (e.g. for heating, cooling, lighting, etc.) in hospitals are uncertain for lack of information about hospital-specific mechanical system operations and process loads. Lawrence Berkeley National Laboratory developed and demonstrated a benchmarking system designed specifically for hospitals. Version 1.0 featured metrics to assess energy performance for the broad variety of ventilation and thermal systems that are present in California hospitals. It required moderate to extensive sub-metering or supplemental monitoring. In this new project, we developed a companion handbook with detailed equations that can be used toconvert data from energy and other sensors that may be added to or already part of hospital heating, ventilation and cooling systems into metrics described in the benchmarking document.This report additionally includes a case study and guidance on including metering into designs for new hospitals, renovations and retrofits. Despite widespread concern that this end-use is large and growing, there is limited reliable information about energy use by distributed medical equipment and other miscellaneouselectrical loads in hospitals. This report proposes a framework for quantifying aggregate energy use of medical equipment and miscellaneous loads. Novel approaches are suggested and tried in an attempt to obtain data to support this framework.

  18. Talisman--rapid application development for the grid.

    Science.gov (United States)

    Oinn, Thomas M

    2003-01-01

    In order to make use of the emerging grid and network services offered by various institutes and mandated by many current research projects, some kind of user accessible client is required. In contrast with attempts to build generic workbenches, Talisman is designed to allow a bioinformatics expert to rapidly build custom applications, immediately visible using standard web technology, for users who wish to concentrate on the biology of their problem rather than the informatics aspects. As a component of the MyGrid project, it is intended to allow access to arbitrary resources, including but not limited to relational, object and flat file data sources, analysis programs and grid based storage, tracking and distributed annotation systems.

  19. The Development of Rapidly Solidified Magnesium – Copper Ribbons

    Directory of Open Access Journals (Sweden)

    Pastuszak M.

    2016-06-01

    Full Text Available The aim of the present work was to plan and carry out an experiment consisting of amorphization of industrial magnesium alloy WE 43 (Mg - 4 Y - 3 RE - 0.5 Zr modified by the copper addition. Investigated alloy modified with 20% of copper was rapidly quenched with the use of melt spinning technique. The effects of cooling rate on the structure and properties of the obtained material were extensively analyzed. The structure and phase analysis of samples were examined using X-ray diffraction method (XRD while the thermal stability of the samples was determined by differential scanning calorimetry (DSC. Microstructure observations were also conducted. The microhardness tests (HV0.02 and corrosion resistance tests were carried out to investigate the properties of the material. Corrosion resistance measurements were held using a typical three-electrode system. As the result of the research, the effect of cooling rate on microstructure and properties of investigated alloy was determined.

  20. The Taylor-Proudman column in a rapidly-rotating compressible fluid I. energy transports

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jun Sang [Halla University, Wonju (Korea, Republic of)

    2014-10-15

    A theoretical study is made of the steady flow of a compressible fluid in a rapidly rotating finite cylinder. Flow is generated by imposing mechanical and/or thermal disturbances at the rotating endwall disks. Both the Ekman and Rossby numbers are small. An examination is made of the energy budget for a control volume in the Ekman boundary layer. A combination of physical variables, which is termed the energy flux content, consisting of temperature and modified angular momentum, emerges to be relevant. The distinguishing features of a compressible fluid, in contrast to those of an incompressible fluid, are noted. A plausible argument is given to explain the difficulty in achieving the Taylor-Proudman column in a compressible rotating fluid. For the Taylor-Proudman column to be sustained, in the interior, it is shown that the net energy transport between the solid disk wall and the interior fluid should vanish. Physical rationalizations are facilitated by resorting to the concept of the afore-stated energy flux content.

  1. Building Energy Model Development for Retrofit Homes

    Energy Technology Data Exchange (ETDEWEB)

    Chasar, David; McIlvaine, Janet; Blanchard, Jeremy; Widder, Sarah H.; Baechler, Michael C.

    2012-09-30

    Based on previous research conducted by Pacific Northwest National Laboratory and Florida Solar Energy Center providing technical assistance to implement 22 deep energy retrofits across the nation, 6 homes were selected in Florida and Texas for detailed post-retrofit energy modeling to assess realized energy savings (Chandra et al, 2012). However, assessing realized savings can be difficult for some homes where pre-retrofit occupancy and energy performance are unknown. Initially, savings had been estimated using a HERS Index comparison for these homes. However, this does not account for confounding factors such as occupancy and weather. This research addresses a method to more reliably assess energy savings achieved in deep energy retrofits for which pre-retrofit utility bills or occupancy information in not available. A metered home, Riverdale, was selected as a test case for development of a modeling procedure to account occupancy and weather factors, potentially creating more accurate estimates of energy savings. This “true up” procedure was developed using Energy Gauge USA software and post-retrofit homeowner information and utility bills. The 12 step process adjusts the post-retrofit modeling results to correlate with post-retrofit utility bills and known occupancy information. The “trued” post retrofit model is then used to estimate pre-retrofit energy consumption by changing the building efficiency characteristics to reflect the pre-retrofit condition, but keeping all weather and occupancy-related factors the same. This creates a pre-retrofit model that is more comparable to the post-retrofit energy use profile and can improve energy savings estimates. For this test case, a home for which pre- and post- retrofit utility bills were available was selected for comparison and assessment of the accuracy of the “true up” procedure. Based on the current method, this procedure is quite time intensive. However, streamlined processing spreadsheets or

  2. Overview of Energy Development Opportunities for Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    Larry Demick

    2012-11-01

    An important opportunity exists for the energy future of Wyoming that will • Maintain its coal industry • Add substantive value to its indigenous coal and natural gas resources • Improve dramatically the environmental impact of its energy production capability • Increase its Gross Domestic Product These can be achieved through development of a carbon conversion industry that transforms coal and natural gas to synthetic transportation fuels, chemical feedstocks, and chemicals that are the building blocks for the chemical industry. Over the longer term, environmentally clean nuclear energy can provide the substantial energy needs of a carbon conversion industry and be part of the mix of replacement technologies for the current fleet of aging coal-fired electric power generating stations.

  3. Synthesis of wind energy development and potential impacts on wildlife in the Pacific Northwest, Oregon and Washington

    Science.gov (United States)

    Miranda H. Mockrin; Rebecca A. Gravenmier

    2012-01-01

    Nationally, there is growing public interest in and policy pressure for developing alternative and renewable sources of energy. Wind energy facilities in the Pacific Northwest expanded rapidly over the past decade, as a result of state policies that encourage wind energy development. While much of the development thus far has occurred on private lands, there is...

  4. Development of molecular electrocatalysts for energy storage.

    Science.gov (United States)

    DuBois, Daniel L

    2014-04-21

    Molecular electrocatalysts can play an important role in energy storage and utilization reactions needed for intermittent renewable energy sources. This manuscript describes three general themes that our laboratories have found useful in the development of molecular electrocatalysts for reduction of CO2 to CO and for H2 oxidation and production. The first theme involves a conceptual partitioning of catalysts into first, second, and outer coordination spheres. This is illustrated with the design of electrocatalysts for CO2 reduction to CO using first and second coordination spheres and for H2 production catalysts using all three coordination spheres. The second theme focuses on the development of thermodynamic models that can be used to design catalysts to avoid high- and low-energy intermediates. In this research, new approaches to the measurement of thermodynamic hydride donor and acceptor abilities of transition-metal complexes were developed. Combining this information with other thermodynamic information such as pKa values and redox potentials led to more complete thermodynamic descriptions of transition-metal hydride, dihydride, and related species. Relationships extracted from this information were then used to develop models that are powerful tools for predicting and understanding the relative free energies of intermediates in catalytic reactions. The third theme is control of proton movement during electrochemical fuel generation and utilization reactions. This research involves the incorporation of pendant amines in the second coordination sphere that can facilitate H-H bond heterolysis and heteroformation, intra- and intermolecular proton-transfer steps, and coupling of proton- and electron-transfer steps. Studies also indicate an important role for the outer coordination sphere in the delivery of protons to the second coordination sphere. Understanding these proton-transfer reactions and their associated energy barriers is key to the design of faster and

  5. Renewable energy markets in developing countries

    DEFF Research Database (Denmark)

    Martinot, E.; Chaurey, A.; Lew, D.

    2002-01-01

    Renewable energy is shifting from the fringe to the mainstream of sustainable development. Past donor efforts achieved modest results but often were not sustained or replicated, which leads now to greater market orientation. Markets for rural household lighting with solar home systems, biogas...

  6. Pollution Control Guidance for Geothermal Energy Development

    Energy Technology Data Exchange (ETDEWEB)

    Hartley, Robert P.

    1978-06-01

    This report summarizes the EPA regulatory approach toward geothermal energy development. The state of knowledge is described with respect to the constituents of geothermal effluents and emissions, including water, air, solid wastes, and noise. Pollutant effects are discussed. Pollution control technologies that may be applicable are described along with preliminary cost estimates for their application. Finally discharge and emission limitations are suggested that may serve as interim guidance for pollution control during early geothermal development.

  7. Prognostication of regional energy system development

    Directory of Open Access Journals (Sweden)

    Grigoriy Borisovich Korovin

    2011-06-01

    Full Text Available This paper analyzes practice and development of new methodological approaches to forecasting the development of regional energy systems. It is shown that the energy complex is involved in a variety of forward and backward linkages as an element of socio-economic systems, and the quality and availability of energy resources largely determines the structure and pace of economic, social and environmental development of the region. Analysis of existing current practice of territorial and sectoral forecasting implemented in Russia and abroad, suggests that such practice is inadequate in its theoretical and methodological elaboration. This is confirmed by the frequent discrepancy between actual results and plans, as well as their regular revision. The methods are mostly based on extrapolation of existing tendencies and not taking into account many factors and emerging trends related to the complexity and openness of the social and economic systems. Post-industrial level of civilization is characterized by fast development of technology; knowledge, information, technological and institutional innovation become the main resources. The greatest importance is attached to such development properties as instability, various orderliness, nonlinearity, interactions etc. Current approaches to forecasting the future are described by a number of theories that are generally called self-organization theory, taking into account these singularities. These concepts should be included in the theoretical basis for the development and implementation of regional development forecasts. Using the synergetic approach assumes that, along with organizational processes, processes of self-organization and self-development are very important in the system, they are characterized by spontaneous, unexpected formations and emerging structures. The development of such systems can generate stable and efficient new structure. The presence of crisis is an integral feature of complex

  8. Novel combustion concepts for sustainable energy development

    CERN Document Server

    Agarwal, Avinash K; Gupta, Ashwani K; Aggarwal, Suresh K; Kushari, Abhijit

    2014-01-01

    This book comprises research studies of novel work on combustion for sustainable energy development. It offers an insight into a few viable novel technologies for improved, efficient and sustainable utilization of combustion-based energy production using both fossil and bio fuels. Special emphasis is placed on micro-scale combustion systems that offer new challenges and opportunities. The book is divided into five sections, with chapters from 3-4 leading experts forming the core of each section. The book should prove useful to a variety of readers, including students, researchers, and professionals.

  9. Building Blocks for the Rapid Development of Parallel Simulations Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Scientists need to be able to quickly develop and run parallel simulations without paying the high price of writing low-level message passing codes using compiled...

  10. Energy research and development profile of Australia

    Energy Technology Data Exchange (ETDEWEB)

    Kenkeremath, L.

    1986-01-01

    Australia is a large, sparsely populated country with an economy based traditionally on raw materials exports. Though still a major international trader in minerals and agricultural products, Australia has suffered a decline in productivity, employment, exports, and economic growth since the 1950s. Most energy research and development (R and D) and policymaking activities are carried out under the National Energy Research, Development, and Demonstration (NERDD) program. The NERDD program priorities include, among others, production of liquid hydrocarbon fuels from natural gas or coal-derived synthesis gas and oil and gas exploration, assessment, and recovery technology (high priority); production of liquid fuels from coal and oil shale by hydrogenation or pyrolysis, coal gasification, and achievement of cost reductions in coal and oil shale exploration and assessment techniques (medium priority); and in-situ coal gasification (low priority). Bilateral agreements for energy R and D with other countries are carried out under the Australian Department of National Development and Energy. Australia currently has agreements related to oil, gas, shale, and coal liquids R and D with the UK, the US, Japan, and West Germany.

  11. Kivy framework for rapid development of mobile applications

    OpenAIRE

    Brajar, Gregor

    2016-01-01

    There are more and more tools and libraries, offering multi-platform application development, on the market. This is due increased number of mobile operating systems in the last couple of years. The goal of this thesis is to get familiar with Kivy architecture, which provides support for desktop and mobile application development. We compared the mentioned tool with competing tools called PhoneGap and Titanium. Kivy is a library for Python programming language. All of the functions of the ...

  12. Fossil Energy Research and Development Program of the U. S. Department of Energy, FY 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-03-01

    The U.S. Department of Energy (DOE) focuses energy Research and Development efforts on new and promising ways to provide for our future energy needs. This document focuses on DOE's programs and projects related to the nation's Fossil Energy resources: coal, oil, natural gas and oil shale. Fossil Energy programs have grown rapidly from about $58 million in FY 1973 to the $802 million requested for FY 1979. As those programs have matured, there have been significant shifts in emphasis. For example, by FY 1979, gasification technologies will have matured sufficiently to enter the demonstration phase. Then we will have to make critical decisions as to which candidate processes to pursue and to encourage industry's active participation as early as possible. We will present the rationale for those changes and others at the beginning of each section describing a particular grouping of similar projects, e.g., coal liquefaction. We will then discuss each project and present its current status along with past and future milestones. Emphasis is on projects with early payoff potential, particularly the direct utilization of coal. However, this near-term emphasis will not overshadow the need for a stong technological base for development of longer-term promising technologies and the need for a strong environmental concern.

  13. Oregon: a guide to geothermal energy development

    Energy Technology Data Exchange (ETDEWEB)

    Justus, D.; Basescu, N.; Bloomquist, R.G.; Higbee, C.; Simpson, S.

    1980-06-01

    A brief overview is given of the geological characteristics of each region of the state as they relate to potential geothermal development. Those exploration methods which can lead to the siting of a deep exploration well are described. Requirements and techniques needed for drilling deeper higher temperature exploration and production wells are presented. Electrical generation, direct utilization, and indirect utilization are reviewed. Economic factors of direct use projects are presented. A general guide to the regulatory framework affecting geothermal energy development is provided. The general steps necessary to gain access to explore, develop, distribute, and use geothermal resources are outlined. (MHR)

  14. Alaska: a guide to geothermal energy development

    Energy Technology Data Exchange (ETDEWEB)

    Basescu, N.; Bloomquist, R.G.; Higbee, C.; Justus, D.; Simpson, S.

    1980-06-01

    A brief overview is given of the geological characteristics of each region of the state as they relate to potential geothermal development. Those exploration methods which can lead to the siting of a deep exploration well are described. Requirements and techniques needed for drilling deeper higher temperature exploration and production wells are presented. Electrical generation, direct utilization, and indirect utilization are reviewed. Economic factors of direct use projects are presented. A general guide to the regulatory framework affecting geothermal energy development is provided. The general steps necessary to gain access to explore, develop, distribute, and use geothermal resources are outlined. (MHR)

  15. Washington: a guide to geothermal energy development

    Energy Technology Data Exchange (ETDEWEB)

    Bloomquist, R.G.; Basescu, N.; Higbee, C.; Justus, D.; Simpson, S.

    1980-01-01

    A brief overview is given of the geological characteristics of each region of the state as they relate to potential geothermal development. Those exploration methods which can lead to the siting of a deep exploration well are described. Requirements and techniques needed for drilling deeper higher temperature exploration and production wells are presented. Electrical generation, direct utilization, and indirect utilization are reviewed. Economic factors of direct use projects are presented. A general guide to the regulatory framework affecting geothermal energy development is provided. The general steps necessary to gain access to explore, develop, distribute, and use geothermal resources are outlined. (MHR)

  16. The Development of Cloud Energy Management

    Directory of Open Access Journals (Sweden)

    Chin-Chi Cheng

    2015-05-01

    Full Text Available The energy management service (EMS has been utilized for saving energy since 1982 by managing the energy usage of site or facilities through the microprocessor, computer, Ethernet, internet, and wireless sensor network. The development and represented function groups of EMS are illustrated in the supplementary file of this paper. Along with this tendency, a cloud EMS, named the intelligent energy management network (iEN, was launched by Chunghwa Telecom in 2011 and tested during a pilot run from 2012 to 2013. The cloud EMS integrated three service modes together, including infrastructure as a service (IaaS, platform as a service (PaaS, and software as a service (SaaS. This cloud EMS could reduce the facility cost and enable a continuously improved service for energy conservation. From the literature review, 32 selected EMS cases of whole site and single facility were chosen for calculating the energy savings and payback rate. According to the literature, the average energy savings by applying EMS are 11.6% and 21.4% for the whole site and single facility, respectively. The iEN was applied on 55 demo sites with the similar scale, the same kind of machines and approaching conditions. The testing sites include a factory, a complex building, and a residual building, 12 lighting systems and 8 air conditioning systems. According to the testing results, the average energy savings by applying iEN are 10% and 23.5% for the whole site and single facility, respectively. Comparing with the reported EMS cases, it was found that the energy savings by adopting the cloud EMS were only 70%–80% compared with those using the traditional EMS. Although the cloud EMS presented less energy savings, it revolutionized the traditional EMS by its innovative business model. Compared with the averaged 1.7 years payback period of the traditional EMS, more than 70% of the cloud EMS cases could pay back immediately for the service fees and without the equipment investment.

  17. Development of rapid phenotypic system for the identification of ...

    Indian Academy of Sciences (India)

    2013-04-20

    Apr 20, 2013 ... Infectious diseases are major cause of mortality in developing countries. The statistical data ... Gram-negative oxidase-positive non- fermenting bacilli are known for their ability to cause infection ..... Badreddine S 2009 Misdiagnosis of an imported case of malaria caused by Plasmodium falciparum. J. Infect.

  18. Rapid development of paper-based fluidic diagnostic devices

    CSIR Research Space (South Africa)

    Smith, S

    2014-11-01

    Full Text Available DEVELOPMENT OF PAPER-BASED FLUIDIC DIAGNOSTIC DEVICES S. Smith1*, H. Chen2, K. Moodley3, T. Joubert4 & K. Land5 1-5Department of Materials Science and Manufacturing Council for Scientific and Industrial Research, South Africa 1ssmith@csir.co.za,2jchen...

  19. Developing and evaluating rapid field methods to estimate peat carbon

    Science.gov (United States)

    Rodney A. Chimner; Cassandra A. Ott; Charles H. Perry; Randall K. Kolka

    2014-01-01

    Many international protocols (e.g., REDD+) are developing inventories of ecosystem carbon stocks and fluxes at country and regional scales, which can include peatlands. As the only nationally implemented field inventory and remeasurement of forest soils in the US, the USDA Forest Service Forest Inventory and Analysis Program (FIA) samples the top 20 cm of organic soils...

  20. Enhancing water security in a rapidly developing shale gas region

    Directory of Open Access Journals (Sweden)

    Shannon Holding

    2017-06-01

    New hydrological insights for the region: Initiatives and tools enhancing water security in the region include strategic partnerships and stakeholder collaborations, policy and regulation development, and data collection and distribution efforts. The contributions and limitations of each of these are discussed. A vulnerability mapping framework is presented which addresses data gaps and provides a tool for decision-making surrounding risk to water quality from various hazards. An example vulnerability assessment was conducted for wastewater transport along pipeline and trucking corridors.

  1. Multilingual Phoneme Models for Rapid Speech Processing System Development

    Science.gov (United States)

    2006-09-01

    Frequency Cepstral Coefficients . . . . . . . 11 2.4.3 Pronunciation Lexicon or Dictionary . . . . . . 12 2.4.4 Language Model...also a requirement for a pronunciation dictionary, and time is required for algorithm development and for building the speech recognition system. To...down into nasals, plosives, fricatives, approx- imants, trills, and flaps. Vowels are broken down by where the tongue is positioned within the mouth

  2. Development of fuel and energy storage technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    Development of fuel cell power plants is intended of high-efficiency power generation using such fuels with less air pollution as natural gas, methanol and coal gas. The closest to commercialization is phosphoric acid fuel cells, and the high in efficiency and rich in fuel diversity is molten carbonate fuel cells. The development is intended to cover a wide scope from solid electrolyte fuel cells to solid polymer electrolyte fuel cells. For new battery power storage systems, development is focused on discrete battery energy storage technologies of fixed type and mobile type (such as electric vehicles). The ceramic gas turbine technology development is purposed for improving thermal efficiency and reducing pollutants. Small-scale gas turbines for cogeneration will also be developed. Development of superconduction power application technologies is intended to serve for efficient and stable power supply by dealing with capacity increase and increase in power distribution distance due to increase in power demand. In the operations to improve the spread and general promotion systems for electric vehicles, load leveling is expected by utilizing and storing nighttime electric power. Descriptions are given also on economical city systems which utilize wide-area energy. 30 figs., 7 tabs.

  3. Development of an Integrated Global Energy Model

    Energy Technology Data Exchange (ETDEWEB)

    Krakowski, R.A.

    1999-07-08

    The primary objective of this research was to develop a forefront analysis tool for application to enhance understanding of long-term, global, nuclear-energy and nuclear-material futures. To this end, an existing economics-energy-environmental (E{sup 3}) model was adopted, modified, and elaborated to examine this problem in a multi-regional (13), long-term ({approximately}2,100) context. The E{sup 3} model so developed was applied to create a Los Alamos presence in this E{sup 3} area through ''niche analyses'' that provide input to the formulation of policies dealing with and shaping of nuclear-energy and nuclear-materials futures. Results from analyses using the E{sup 3} model have been presented at a variety of national and international conferences and workshops. Through use of the E{sup 3} model Los Alamos was afforded the opportunity to participate in a multi-national E{sup 3} study team that is examining a range of global, long-term nuclear issues under the auspices of the IAEA during the 1998-99 period . Finally, the E{sup 3} model developed under this LDRD project is being used as an important component in more recent Nuclear Material Management Systems (NMMS) project.

  4. Rapid and Reusable Text Visualization and Exploration Development with DELVE.

    Science.gov (United States)

    Harris, Daniel R; Kavuluru, Ramakanth; Jaromczyk, Jerzy W; Johnson, Todd R

    2017-01-01

    We present DELVE (Document ExpLoration and Visualization Engine), a framework for developing interactive visualizations as modular Web-applications to assist researchers with exploratory literature search. The goal for web-applications driven by DELVE is to better satisfy the information needs of researchers and to help explore and understand the state of research in scientific liter ature by providing immersive visualizations that both contain facets and are driven by facets derived from the literature. We base our framework on principles from user-centered design and human-computer interaction (HCI). Preliminary evaluations demon strate the usefulness of DELVE's techniques: (1) a clinical researcher immediately saw that her original query was inappropriate simply due to the frequencies displayed via generalized clouds and (2) a muscle biologist quickly learned of vocabulary differences found between two disciplines that were referencing the same idea, which we feel is critical for interdisciplinary work. We dis cuss the underlying category-theoretic model of our framework and show that it naturally encourages the development of reusable visualizations by emphasizing interoperability.

  5. Infrastructure for Rapid Development of Java GUI Programs

    Science.gov (United States)

    Jones, Jeremy; Hostetter, Carl F.; Wheeler, Philip

    2006-01-01

    The Java Application Shell (JAS) is a software framework that accelerates the development of Java graphical-user-interface (GUI) application programs by enabling the reuse of common, proven GUI elements, as distinguished from writing custom code for GUI elements. JAS is a software infrastructure upon which Java interactive application programs and graphical user interfaces (GUIs) for those programs can be built as sets of plug-ins. JAS provides an application- programming interface that is extensible by application-specific plugins that describe and encapsulate both specifications of a GUI and application-specific functionality tied to the specified GUI elements. The desired GUI elements are specified in Extensible Markup Language (XML) descriptions instead of in compiled code. JAS reads and interprets these descriptions, then creates and configures a corresponding GUI from a standard set of generic, reusable GUI elements. These elements are then attached (again, according to the XML descriptions) to application-specific compiled code and scripts. An application program constructed by use of JAS as its core can be extended by writing new plug-ins and replacing existing plug-ins. Thus, JAS solves many problems that Java programmers generally solve anew for each project, thereby reducing development and testing time.

  6. Photovoltaic module energy rating methodology development

    Energy Technology Data Exchange (ETDEWEB)

    Kroposki, B.; Myers, D.; Emery, K.; Mrig, L. [National Renewable Energy Lab., Golden, CO (United States); Whitaker, C.; Newmiller, J. [Endecon Engineering, San Ramon, CA (United States)

    1996-05-01

    A consensus-based methodology to calculate the energy output of a PV module will be described in this paper. The methodology develops a simple measure of PV module performance that provides for a realistic estimate of how a module will perform in specific applications. The approach makes use of the weather data profiles that describe conditions throughout the United States and emphasizes performance differences between various module types. An industry-representative Technical Review Committee has been assembled to provide feedback and guidance on the strawman and final approach used in developing the methodology.

  7. Development of a definition for Rapid Progression (RP) of renal function in HIV-positive persons

    DEFF Research Database (Denmark)

    Kamara, David A; Nielsen, Lene Ryom; Ross, Michael

    2014-01-01

    No consensus exists on how to define abnormally rapid deterioration in renal function (Rapid Progression, RP). We developed an operational definition of RP in HIV-positive persons with baseline estimated glomerular filtration rate (eGFR) >90ml/min/1.73m2 (using Cockcroft Gault) in the Data Collec...

  8. Urbanism and energy in developing regions

    Energy Technology Data Exchange (ETDEWEB)

    Meier, R.L.; Berman, S.; Dowell, D.

    1978-03-01

    The pace of urbanization must continue, because in most parts of the world the surplus population in the countryside has nowhere else to go. The world is about 40% urban now and apparently headed for the 80 to 90% share of the total population presently exhibited by the developed countries. Thus, the 1.6 billion urban dwellers in 1978 would become about 3 billion in 1995--if major catastrophes can be avoided. Feasibility assessments for Sao Paulo-Rio de Janeiro, Calcutta, Cairo-Alexandria, Mexico City, and Seoul are presented in the appendices. This analysis-from-a-distance is insufficient to judge how much extra installed electrical generating capacity is required before 1995, the added refining capability for liquid fuels, or the uses for new LNG and coal imports due to be arranged. It is evident that energy (and perhaps also water in most regions) planning is the major determinant of the manner in which these urban areas will adapt to the extraordinary pressures for new settlement. The current round of planning in such metropolitan areas has been addressed to solving traffic-congestion problems, and reorganizing land use in central districts, as the most-pressing issues. Since energy sources and distribution systems now affect the largest and most crucial investments in urban growth it is to be expected that future metropolitan planning may concentrate upon energy efficiency. Energy supplies must be planned to meet requirements set by locally dominant values regarding human services and the environment.

  9. Renewable Energy for Rural Economic Development

    Energy Technology Data Exchange (ETDEWEB)

    Hartman, Cathy L. [Utah State Univ., Logan, UT (United States); Stafford, Edwin R. [Utah State Univ., Logan, UT (United States)

    2013-09-30

    When Renewable Energy for Rural Economic Development (RERED) began in 2005, Utah had no commercial wind power projects in operation. Today, the state hosts two commercial wind power plants, the Spanish Fork Wind Project and the Milford Wind Corridor Project, totaling 324 megawatts (MW) of wind capacity. Another project in San Juan County is expected to break ground very soon, and two others, also in San Juan County, are in the approval process. RERED has played a direct role in advancing wind power (and other renewable energy and clean technology innovations) in Utah through its education outreach and research/publication initiatives. RERED has also witnessed and studied some of the persistent barriers facing wind power development in communities across Utah and the West, and its research expanded to examine the diffusion of other energy efficiency and clean technology innovations. RERED leaves a legacy of publications, government reports, and documentary films and educational videos (archived at www.cleantech.usu.edu) to provide important insights for entrepreneurs, policymakers, students, and citizens about the road ahead for transitioning society onto a cleaner, more sustainable future.

  10. Parallel grid library for rapid and flexible simulation development

    Science.gov (United States)

    Honkonen, I.; von Alfthan, S.; Sandroos, A.; Janhunen, P.; Palmroth, M.

    2013-04-01

    We present an easy to use and flexible grid library for developing highly scalable parallel simulations. The distributed cartesian cell-refinable grid (dccrg) supports adaptive mesh refinement and allows an arbitrary C++ class to be used as cell data. The amount of data in grid cells can vary both in space and time allowing dccrg to be used in very different types of simulations, for example in fluid and particle codes. Dccrg transfers the data between neighboring cells on different processes transparently and asynchronously allowing one to overlap computation and communication. This enables excellent scalability at least up to 32 k cores in magnetohydrodynamic tests depending on the problem and hardware. In the version of dccrg presented here part of the mesh metadata is replicated between MPI processes reducing the scalability of adaptive mesh refinement (AMR) to between 200 and 600 processes. Dccrg is free software that anyone can use, study and modify and is available at https://gitorious.org/dccrg. Users are also kindly requested to cite this work when publishing results obtained with dccrg. Catalogue identifier: AEOM_v1_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEOM_v1_0.html Program obtainable from: CPC Program Library, Queen’s University, Belfast, N. Ireland Licensing provisions: GNU Lesser General Public License version 3 No. of lines in distributed program, including test data, etc.: 54975 No. of bytes in distributed program, including test data, etc.: 974015 Distribution format: tar.gz Programming language: C++. Computer: PC, cluster, supercomputer. Operating system: POSIX. The code has been parallelized using MPI and tested with 1-32768 processes RAM: 10 MB-10 GB per process Classification: 4.12, 4.14, 6.5, 19.3, 19.10, 20. External routines: MPI-2 [1], boost [2], Zoltan [3], sfc++ [4] Nature of problem: Grid library supporting arbitrary data in grid cells, parallel adaptive mesh refinement, transparent remote neighbor data updates and

  11. Energy Storage Technology Development for Space Exploration

    Science.gov (United States)

    Mercer, Carolyn R.; Jankovsky, Amy L.; Reid, Concha M.; Miller, Thomas B.; Hoberecht, Mark A.

    2011-01-01

    The National Aeronautics and Space Administration is developing battery and fuel cell technology to meet the expected energy storage needs of human exploration systems. Improving battery performance and safety for human missions enhances a number of exploration systems, including un-tethered extravehicular activity suits and transportation systems including landers and rovers. Similarly, improved fuel cell and electrolyzer systems can reduce mass and increase the reliability of electrical power, oxygen, and water generation for crewed vehicles, depots and outposts. To achieve this, NASA is developing non-flow-through proton-exchange-membrane fuel cell stacks, and electrolyzers coupled with low permeability membranes for high pressure operation. The primary advantage of this technology set is the reduction of ancillary parts in the balance-of-plant fewer pumps, separators and related components should result in fewer failure modes and hence a higher probability of achieving very reliable operation, and reduced parasitic power losses enable smaller reactant tanks and therefore systems with lower mass and volume. Key accomplishments over the past year include the fabrication and testing of several robust, small-scale non-flow-through fuel cell stacks that have demonstrated proof-of-concept. NASA is also developing advanced lithium-ion battery cells, targeting cell-level safety and very high specific energy and energy density. Key accomplishments include the development of silicon composite anodes, lithiatedmixed- metal-oxide cathodes, low-flammability electrolytes, and cell-incorporated safety devices that promise to substantially improve battery performance while providing a high level of safety.

  12. Proceedings of the third workshop on the energy development board of Mercer County, North Dakota

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-03-01

    Two earlier workshops concerned with managing growth in Mercer County, North Dakota focused on the activities of the Energy Development Board (EDB) and were held in 1977 and 1978, respectively. This third workshop, Energy Development in Rural Areas - Local Implementation of National Priorities addresses the transferability of the EDB as an organization approach for managing energy-related rapid growth; the potential for developing integrated energy resource conservation/economic plans in rural energy development areas; and Federal policy and initiatives regarding energy-impact assistance. Panel discussions on these subjects were conducted and the comments are presented. The introductory address by Wayne Sanstead, Lt. Gov. of North Dakota and the keynote address by Edward Helminski, White House Management Task Force on Energy Shortages, are included.

  13. Nuclear energy, renewable energy, and economic growth in developed and developing countries : A modelling analysis from simultaneous-equation models

    OpenAIRE

    Anis Omri; Anissa Chaibi

    2014-01-01

    This paper investigates the causal relationship among two types of energy consumption (nuclear energy and renewable energy) and economic growth using dynamic simultaneous-equation panel data models for 17 developed and developing countries. Our results in

  14. State and Federal project development procedures for bus rapid transit : managing differences and reducing implementation delays

    Science.gov (United States)

    2011-08-01

    This report documents an investigation into the transportation project development process in the : context of the implementation of bus rapid transit systems on the State Highway System as well as such : systems being part of the Federal New Starts ...

  15. Rapidly developing renal milk of calcium in a patient with myelomonocytic leukaemia

    OpenAIRE

    Morjaria, Anika; Balasubramaniam, Gowrie; Perera, Saman; Almond, Mike K

    2014-01-01

    Rapidly developing renal milk of calcium, diagnosed by computed tomography (CT), X-ray and ultrasound, should be considered as a rare differential diagnosis in patients with apparent ureteric obstruction to prevent unnecessary interventions.

  16. Developing an energy efficiency service industry in Shanghai

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Jiang; Goldman, Charles; Levine, Mark; Hopper, Nicole

    2004-02-10

    The rapid development of the Chinese economy over the past two decades has led to significant growth in China's energy consumption and greenhouse gas (GHG) emissions. Between 1980 and 2000, China's energy consumption more than doubled from 602 million to 1.3 billion tons of coal-equivalent (NBS, 2003). In 2000, China's GHG emissions were about 12% of the global total, ranked second behind only the US. According to the latest national development plan issued by the Chinese government, China's energy demand is likely to double again by 2020 (DRC, 2004), based on a quadrupling of its gross domestic product (GDP). The objectives of the national development plan imply that China needs to significantly raise the energy efficiency of its economy, i.e., cutting the energy intensity of its economy by half. Such goals are extremely ambitious, but not infeasible. China has achieved such reductions in the past, and its current overall level of energy efficiency remains far behind those observed in other developed economies. However, challenges remain whether China can put together an appropriate policy framework and the institutions needed to improve the energy efficiency of its economy under a more market-based economy today. Shanghai, located at the heart of the Yangtze River Delta, is the most dynamic economic and financial center in the booming Chinese economy. With 1% of Chinese population (13 million inhabitants), its GDP in 2000 stood at 455 billion RMB yuan (5% of the national total), with an annual growth rate of 12%--much higher than the national average. It is a major destination for foreign as well as Chinese domestic investment. In 2003, Shanghai absorbed 10% of actual foreign investment in all China (''Economist'', January 17-23, 2004). Construction in Shanghai continues at a breakneck pace, with an annual addition of approximately 200 million square foot of residential property and 100 million square foot of commercial and

  17. Energy modelling towards low carbon development of Beijing in 2030

    DEFF Research Database (Denmark)

    Zhao, Guangling; Guerrero, Josep M.; Jiang, Kejun

    2017-01-01

    PLAN, an energy system analysis tool, is chosen to develop the reference energy model. Secondly, this reference model is used to investigate the alternative energy system for integrating renewable energies. Three scenarios are developed towards the energy system of Beijing in 2030, which are: (i) reference...

  18. Swedish property developer pioneers renewable energy

    Energy Technology Data Exchange (ETDEWEB)

    Dalenbaeck, J.O. [Chalmers Univ. of Technology, Stockholm (Sweden)

    1997-06-01

    This brief article describes the use of wood fuels and solar energy to heat 100,000 m{sup 2} of housing developments and service premises in an urban district in Sweden. All the major building areas have central heating plants with roof-integrated solar collectors and buffer storage for the supply of domestic hot water to connected buildings during the summer. In winter, supplementary heat for space heating and domestic hot water is supplied to the buffer stores by modern wood fuel boilers. (UK)

  19. Wind turbulence characterization for wind energy development

    Energy Technology Data Exchange (ETDEWEB)

    Wendell, L.L.; Gower, G.L.; Morris, V.R.; Tomich, S.D.

    1991-09-01

    As part of its support of the US Department of Energy's (DOE's) Federal Wind Energy Program, the Pacific Northwest Laboratory (PNL) has initiated an effort to work jointly with the wind energy community to characterize wind turbulence in a variety of complex terrains at existing or potential sites of wind turbine installation. Five turbulence characterization systems were assembled and installed at four sites in the Tehachapi Pass in California, and one in the Green Mountains near Manchester, Vermont. Data processing and analyses techniques were developed to allow observational analyses of the turbulent structure; this analysis complements the more traditional statistical and spectral analyses. Preliminary results of the observational analyses, in the rotating framework or a wind turbine blade, show that the turbulence at a site can have two major components: (1) engulfing eddies larger than the rotor, and (2) fluctuating shear due to eddies smaller than the rotor disk. Comparison of the time series depicting these quantities at two sites showed that the turbulence intensity (the commonly used descriptor of turbulence) did not adequately characterize the turbulence at these sites. 9 refs., 10 figs.,

  20. Human development and sustainability of energy systems

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    This seminar on human development and sustainability was jointly organized by the French agency of environment and energy mastery (Ademe) and Enerdata company. This document summarises the content of the different presentations and of the minutes of the discussions that took place at the end of each topic. The different themes discussed were: 1 - Political and methodological issues related to sustainability (sustainability concept in government policy, sustainability and back-casting: lessons from EST); 2 - towards a socially viable world: thematic discussions (demography and peoples' migration; time budget and life style change - equal sex access to instruction and labour - geopolitical regional and inter-regional universal cultural acceptability; welfare, poverty and social link and economics); 3 - building up an environmentally sustainable energy world, keeping resources for future generations and preventing geopolitical ruptures (CO{sub 2} emissions; nuclear issues; land-use, noise, and other industrial risks). The memorandum on sustainability issues in view of very long term energy studies is reprinted in the appendix. The transparencies of seven presentations are attached to this document. (J.S.)

  1. Development of coal energy utilization technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    Coal liquefaction produces new and clean energy by performing hydrogenation, decomposition and liquefaction on coal under high temperatures and pressures. NEDO has been developing bituminous coal liquefaction technologies by using a 150-t/d pilot plant. It has also developed quality improving and utilization technologies for liquefied coal, whose practical use is expected. For developing coal gasification technologies, construction is in progress for a 200-t/d pilot plant for spouted bed gasification power generation. NEDO intends to develop coal gasification composite cycle power generation with high efficiency and of environment harmonious type. This paper summarizes the results obtained during fiscal 1994. It also dwells on technologies to manufacture hydrogen from coal. It further describes development of technologies to manufacture methane and substituting natural gas (SNG) by hydrogenating and gasifying coal. The ARCH process can select three operation modes depending on which of SNG yield, thermal efficiency or BTX yield is targeted. With respect to promotion of coal utilization technologies, description is given on surveys on development of next generation technologies for coal utilization, and clean coal technology promotion projects. International coal utilization and application projects are also described. 9 figs., 3 tabs.

  2. Rapid energy modeling for existing buildings: Testing the business and environmental potential through an experiment at Autodesk

    Energy Technology Data Exchange (ETDEWEB)

    Deodhar, Aniruddha; Stewart, Emma; Young, Rahul; Khan, Haider

    2010-09-15

    Retrofits of existing buildings represent a huge, growing market and an opportunity to achieve some of the most sizable and cost-effective carbon reductions in any sector of the economy. More 'zero energy' and 'carbon neutral' buildings are being conceived daily by combining energy efficiency measures with renewable energy technologies. However, for all the progress, the building industry faces technical and cost challenges in identifying the highest potential retrofit candidates. This presentation investigates one potential solution, a technology driven workflow called rapid energy modeling, to accelerate and scale the process of analyzing performance for existing buildings in prioritizing improvements.

  3. Development of a biomechanical energy harvester

    Directory of Open Access Journals (Sweden)

    Donelan J Maxwell

    2009-06-01

    Full Text Available Abstract Background Biomechanical energy harvesting–generating electricity from people during daily activities–is a promising alternative to batteries for powering increasingly sophisticated portable devices. We recently developed a wearable knee-mounted energy harvesting device that generated electricity during human walking. In this methods-focused paper, we explain the physiological principles that guided our design process and present a detailed description of our device design with an emphasis on new analyses. Methods Effectively harvesting energy from walking requires a small lightweight device that efficiently converts intermittent, bi-directional, low speed and high torque mechanical power to electricity, and selectively engages power generation to assist muscles in performing negative mechanical work. To achieve this, our device used a one-way clutch to transmit only knee extension motions, a spur gear transmission to amplify the angular speed, a brushless DC rotary magnetic generator to convert the mechanical power into electrical power, a control system to determine when to open and close the power generation circuit based on measurements of knee angle, and a customized orthopaedic knee brace to distribute the device reaction torque over a large leg surface area. Results The device selectively engaged power generation towards the end of swing extension, assisting knee flexor muscles by producing substantial flexion torque (6.4 Nm, and efficiently converted the input mechanical power into electricity (54.6%. Consequently, six subjects walking at 1.5 m/s generated 4.8 ± 0.8 W of electrical power with only a 5.0 ± 21 W increase in metabolic cost. Conclusion Biomechanical energy harvesting is capable of generating substantial amounts of electrical power from walking with little additional user effort making future versions of this technology particularly promising for charging portable medical devices.

  4. Development of a biomechanical energy harvester.

    Science.gov (United States)

    Li, Qingguo; Naing, Veronica; Donelan, J Maxwell

    2009-06-23

    Biomechanical energy harvesting-generating electricity from people during daily activities-is a promising alternative to batteries for powering increasingly sophisticated portable devices. We recently developed a wearable knee-mounted energy harvesting device that generated electricity during human walking. In this methods-focused paper, we explain the physiological principles that guided our design process and present a detailed description of our device design with an emphasis on new analyses. Effectively harvesting energy from walking requires a small lightweight device that efficiently converts intermittent, bi-directional, low speed and high torque mechanical power to electricity, and selectively engages power generation to assist muscles in performing negative mechanical work. To achieve this, our device used a one-way clutch to transmit only knee extension motions, a spur gear transmission to amplify the angular speed, a brushless DC rotary magnetic generator to convert the mechanical power into electrical power, a control system to determine when to open and close the power generation circuit based on measurements of knee angle, and a customized orthopaedic knee brace to distribute the device reaction torque over a large leg surface area. The device selectively engaged power generation towards the end of swing extension, assisting knee flexor muscles by producing substantial flexion torque (6.4 Nm), and efficiently converted the input mechanical power into electricity (54.6%). Consequently, six subjects walking at 1.5 m/s generated 4.8 +/- 0.8 W of electrical power with only a 5.0 +/- 21 W increase in metabolic cost. Biomechanical energy harvesting is capable of generating substantial amounts of electrical power from walking with little additional user effort making future versions of this technology particularly promising for charging portable medical devices.

  5. 'Energy challenges multiply rapidly' and 'The Book of Numbers'

    Energy Technology Data Exchange (ETDEWEB)

    Forbes, A.; Cragg, C.

    2008-07-15

    In two articles attention is paid to statistical data on energy, focusing on the BP Statistical Review of World Energy. From the first article it appears that a number of worrying themes emerge from detailed energy data for 2007 published by BP and Cedigaz. With energy demand rising inexorably and supply struggling to keep up, prices are probably to remain high and volatile, We are not running short of hydrocarbons yet, but bringing reserves to market is becoming increasingly difficult. And carbon emissions continue to rise rapidly. The second article focuses on the annually published BP Statistical Review of World Energy. The Review has now been published for over 50 years and remains by far the most accessible source of global energy statistics available. Looking back to the earliest editions not only reveals the astonishing, almost exponential, increase in the world's energy demand, but also how the preoccupations of the oil industry have changed down the years.

  6. Rapid Impedance Spectrum Measurements for State-of-Health Assessment of Energy Storage Devices

    Energy Technology Data Exchange (ETDEWEB)

    Jon P. Christophersen; John L. Morrison; Chester G. Motloch; William H. Morrison

    2012-04-01

    Harmonic compensated synchronous detection (HCSD) is a technique that can be used to measure wideband impedance spectra within seconds based on an input sum-of-sines signal having a frequency spread separated by harmonics. The battery (or other energy storage device) is excited with a sum-of-sines current signal that has a duration of at least one period of the lowest frequency. The voltage response is then captured and synchronously detected at each frequency of interest to determine the impedance spectra. This technique was successfully simulated using a simplified battery model and then verified with commercially available Sanyo lithium-ion cells. Simulations revealed the presence of a start-up transient effect when only one period of the lowest frequency is included in the excitation signal. This transient effect appears to only influence the low-frequency impedance measurements and can be reduced when a longer input signal is used. Furthermore, lithium-ion cell testing has indicated that the transient effect does not seem to impact the charge transfer resistance in the mid-frequency region. The degradation rates for the charge transfer resistance measured from the HCSD technique were very similar to the changes observed from standardized impedance spectroscopy methods. Results from these studies, therefore, indicate that HCSD is a viable, rapid alternative approach to acquiring impedance spectra.

  7. Hot Dry Rock Geothermal Energy Development Program

    Energy Technology Data Exchange (ETDEWEB)

    Smith, M.C.; Hendron, R.H.; Murphy, H.D.; Wilson, M.G.

    1989-12-01

    During Fiscal Year 1987, emphasis in the Hot Dry Rock Geothermal Energy Development Program was on preparations for a Long-Term Flow Test'' of the Phase II'' or Engineering'' hot dry rock energy system at Fenton Hill, New Mexico. A successful 30-day flow test of the system during FY86 indicated that such a system would produce heat at a temperature and rate that could support operation of a commercial electrical power plant. However, it did not answer certain questions basic to the economics of long-term operation, including the rate of depletion of the thermal reservoir, the rate of water loss from the system, and the possibility of operating problems during extended continuous operation. Preparations for a one-year flow test of the system to answer these and more fundamental questions concerning hot dry rock systems were made in FY87: design of the required surface facilities; procurement and installation of some of their components; development and testing of slimline logging tools for use through small-diameter production tubing; research on temperature-sensitive reactive chemical tracers to monitor thermal depletion of the reservoir; and computer simulations of the 30-day test, extended to modeling the planned Long-Term Flow Test. 45 refs., 34 figs., 5 tabs.

  8. Developing an Energy Performance Modeling Startup Kit

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-10-01

    In 2011, the NAHB Research Center began assessing the needs and motivations of residential remodelers regarding energy performance remodeling. This report outlines: the current remodeling industry and the role of energy efficiency; gaps and barriers to adding energy efficiency into remodeling; and support needs of professional remodelers to increase sales and projects involving improving home energy efficiency.

  9. Dual-energy synchrotron X ray measurements of rapid soil density and water content changes in swelling soils during infiltration

    Science.gov (United States)

    Garnier, Patricia; Angulo-Jaramillo, Rafael; DiCarlo, David A.; Bauters, Tim W. J.; Darnault, Christophe J. G.; Steenhuis, Tammo S.; Parlange, J.-Yves; Baveye, Philippe

    1998-11-01

    Understanding soil swelling is hampered by the difficulty of simultaneously measuring water content and bulk density. A number of studies have used dual-energy gamma rays to investigate soil swelling. The long counting time of this technique makes it impracticable for studying the rapid changes in moisture content and soil swelling shortly after infiltration is initiated. In this paper, we use the dual-energy synchrotron X ray to measure, for the first time, the water content and bulk density changes during the fast, initial phase of the swelling process. Ponded infiltration experiments were performed with two soils: a bentonite-sand mixture and a vertisol. Swelling curves and hydraulic diffusivity were determined. Deformation was very rapid immediately after water application and then became progressively slower. The hydraulic diffusivity decreased with time, which can partially explain the very rapid decrease in infiltration rates observed in the field.

  10. Rapid coating of AZ31 magnesium alloy with calcium deficient hydroxyapatite using microwave energy

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Yufu, E-mail: Yufu.Ren@rockets.utoledo.edu [Department of Mechanical, Industrial and Manufacturing Engineering, The University of Toledo, Toledo, OH (United States); Zhou, Huan [Department of Mechanical, Industrial and Manufacturing Engineering, The University of Toledo, Toledo, OH (United States); Institute of Biomedical Engineering and Health Sciences, Changzhou University, Changzhou, Jiangsu (China); Nabiyouni, Maryam [Department of Bioengineering, The University of Toledo, Toledo, OH (United States); Bhaduri, Sarit B. [Department of Mechanical, Industrial and Manufacturing Engineering, The University of Toledo, Toledo, OH (United States); Division of Dentistry, The University of Toledo, Toledo, OH (United States)

    2015-04-01

    Due to their unique biodegradability, magnesium alloys have been recognized as suitable metallic implant materials for degradable bone implants and bioresorbable cardiovascular stents. However, the extremely high degradation rate of magnesium alloys in physiological environment has restricted its practical application. This paper reports the use of a novel microwave assisted coating technology to improve the in vitro corrosion resistance and biocompatibility of Mg alloy AZ31. Results indicate that a dense calcium deficient hydroxyapatite (CDHA) layer was uniformly coated on a AZ31 substrate in less than 10 min. Weight loss measurement and SEM were used to evaluate corrosion behaviors in vitro of coated samples and of non-coated samples. It was seen that CDHA coatings remarkably reduced the mass loss of AZ31 alloy after 7 days of immersion in SBF. In addition, the prompt precipitation of bone-like apatite layer on the sample surface during immersion demonstrated a good bioactivity of the CDHA coatings. Proliferation of osteoblast cells was promoted in 5 days of incubation, which indicated that the CDHA coatings could improve the cytocompatibility of the AZ31 alloy. All the results suggest that the CDHA coatings, serving as a protective layer, can enhance the corrosion resistance and biological response of magnesium alloys. Furthermore, this microwave assisted coating technology could be a promising method for rapid surface modification of biomedical materials. - Highlights: • A microwave assisted coating process for biodegradable Mg alloy. • CDHA coatings were successfully developed on AZ31 alloy in minutes. • The as-deposited CDHA coatings significantly reduced the degradation rate of AZ31 alloy. • The CDHA coated AZ31 alloy showed good bioactivity and biocompatibility in vitro. • The microwave assisted coating process can be used as rapid surface modification for bioimplants.

  11. Rapid Hip Osteoarthritis Development in a Patient with Anterior Acetabular Cyst with Sagittal Alignment Change

    Directory of Open Access Journals (Sweden)

    Yasuhiro Homma

    2014-01-01

    Full Text Available Rapidly destructive coxarthrosis (RDC is rare and develops unusual clinical course. Recent studies suggest multiple possible mechanisms of the development of RDC. However the exact mechanism of RDC is still not clear. The difficulty of the study on RDC is attributed to its rareness and the fact that the data before the onset of RDC is normally unavailable. In this report, we presented the patient having the radiographic data before the onset who had rapid osteoarthritis (OA development after contralateral THA, which meets the current criteria of RDC. We thought that the increased posterior tilt of the pelvis after THA reinforced the stress concentration at pre-existed anterior acetabular cyst, thereby the destruction of the cyst was occurred. As a result the rapid OA was developed. We think that there is the case of rapid osteoarthritis developing due to alternating load concentration by posterior pelvic tilt on preexisting anterior acetabular cyst such as our patient among the cases diagnosed as RDC without any identifiable etiology. The recognition of sagittal alignment changes and anterior acetabular cyst may play important role in prediction and prevention of the rapid hip osteoarthritis development similar to RDC.

  12. Accelerated Nuclear Energy Materials Development with Multiple Ion Beams

    Energy Technology Data Exchange (ETDEWEB)

    Fluss, M J; Bench, G

    2009-08-19

    A fundamental issue in nuclear energy is the changes in material properties as a consequence of time, temperature, and neutron fluence. Usually, candidate materials for nuclear energy applications are tested in nuclear reactors to understand and model the changes that arise from a combination of atomic displacements, helium and hydrogen production, and other nuclear transmutations (e.g. fission and the production of fission products). Experiments may be carried out under neutron irradiation conditions in existing nuclear materials test reactors (at rates of 10 to 20 displacements per atom (DPA) per year or burn-up rates of a few percent per year for fertile fuels), but such an approach takes much too long for many high neutron fluence scenarios (300 DPA for example) expected in reactors of the next generation. Indeed it is reasonable to say that there are no neutron sources available today to accomplish sufficiently rapid accelerated aging let alone also provide the temperature and spectral characteristics of future fast spectrum nuclear energy systems (fusion and fission both). Consequently, materials research and development progress continues to be severely limited by this bottleneck.

  13. current status and outlook of renewable energy development in nigeria

    African Journals Online (AJOL)

    reacholaibrahim@hotmail.com

    presented in this paper is a crucial eye-opener for relevant government agencies towards developing these energy resources in tackling the present energy crisis in Nigeria. Keywords: renewable energy, per capita energy, Nigeria, biomass, fossil fuels, growth scenario. 1. INTRODUCTION. Energy is a vital ingredient for ...

  14. Transportation energy strategy: Project {number_sign}5 of the Hawaii Energy Strategy Development Program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    This study was prepared for the State Department of Business, Economic Development and Tourism (DBEDT) as part of the Hawaii Energy Strategy program. Authority and responsibility for energy planning activities, such as the Hawaii Energy Strategy, rests with the State Energy Resources Coordinator, who is the Director of DBEDT. Hawaii Energy Strategy Study No. 5, Transportation Energy Strategy Development, was prepared to: collect and synthesize information on the present and future use of energy in Hawaii`s transportation sector, examine the potential of energy conservation to affect future energy demand; analyze the possibility of satisfying a portion of the state`s future transportation energy demand through alternative fuels; and recommend a program targeting energy use in the state`s transportation sector to help achieve state goals. The analyses and conclusions of this report should be assessed in relation to the other Hawaii Energy Strategy Studies in developing a comprehensive state energy program. 56 figs., 87 tabs.

  15. Innovation development for highly energy-efficient housing

    NARCIS (Netherlands)

    Mlecnik, E.

    2014-01-01

    Buildings account for 40% of EU final energy demand and policy developments like the Energy Performance of Buildings Directive are stimulating the innovation development for nearly zero-energy housing. However, businesses switching to innovative products for highly energy-efficient houses is a

  16. Solar Energy: A Necessary Investment in a Developing Economy ...

    African Journals Online (AJOL)

    Electrical Energy is the pivot of all developmental efforts in both the developed and the developing nations. Due to the fact that sources or conventional means of energy generation arc finite and fast depleting, most industrialized countries have started research on solar energy as a renewable sources or energy. This paper ...

  17. Challenges in energy supply and infrastructural development in ...

    African Journals Online (AJOL)

    On the overall, developing countries must address the eminent energy challenges and invest more towards energy security as the key to industrialization and economic development. National energy mix must also be diversified to cover alternative fuels and renewable energy sources to ensure sustainability. Keywords: ...

  18. Energy modelling towards low carbon development of Beijing in 2030

    DEFF Research Database (Denmark)

    Zhao, Guangling; Guerrero, Josep M.; Jiang, Kejun

    2017-01-01

    Beijing, as the capital of China, is under the high pressure of climate change and pollution. The consumption of non-renewable energy is one of the most important sources of the CO2 emissions, which cause climate changes. This paper presents a study on the energy system modelling towards renewable...... energy and low carbon development for the city of Beijing. The analysis of energy system modelling is organized in two steps to explore the alternative renewable energy system in Beijing. Firstly, a reference energy system of Beijing is created based on the available data in 2014. The Energy......PLAN, an energy system analysis tool, is chosen to develop the reference energy model. Secondly, this reference model is used to investigate the alternative energy system for integrating renewable energies. Three scenarios are developed towards the energy system of Beijing in 2030, which are: (i) reference...

  19. Development of Ocean Energy Technologies: A Case Study of China

    Directory of Open Access Journals (Sweden)

    Qin Guodong

    2013-01-01

    Full Text Available For the energy shortage in China's coastal areas, which has exerted severe impact on economy development, a growing number of attentions have been paid to ocean energy utilization. In this paper, a review of related researches as well as development of ocean energy in China is given. The main part of this paper is the investigation into ocean energy distribution and technology status of tidal energy, wave energy, and thermal energy, especially that of the tidal energy and wave energy. Finally, some recommendations for the future development of ocean energy in China are also provided. For further research in this field and development of ocean energy utilization in China, this review can be taken as reference.

  20. The Development of International Law in the Field of Renewable Energy

    Directory of Open Access Journals (Sweden)

    Imam Mulyana

    2016-04-01

    Full Text Available Energy plays a pivotal role in ensuring economic growth, social equity and live-able environment. In this regard, the non-renewable or conventional source of energy such as oil, gas and coal continue to supply the energy demand throughout the world. Nevertheless, as the awareness of the international society towards the protection and preservation of the global environment is rapidly growing, the utilization of energy resources has been gradually shifted from the non-renewable to renewable ones. Observing the international developments in the field of energy, further international legal instruments is required to be able to regulate renewable energy activities undertaken by the countries today. Although there have been a number of rules in international law, but until recently, most of these regulations is still not legally binding. Moreover, to achieve world order that uses renewable energy, international law also had to resolve some fundamental issues, namely the issue of state sovereignty and energy security.

  1. Energy status and ovarian follicular development

    NARCIS (Netherlands)

    Meng, Li

    2016-01-01

    Female reproduction is tightly linked to body energy status and it has become increasingly clear that disturbed energy metabolism can negatively affect reproductive performance. Nevertheless, the way how a disturbed energy status affects ovarian follicular reserve as well as follicular recruitment

  2. 76 FR 43654 - Renewable Energy and Energy Efficiency Executive Business Development Mission

    Science.gov (United States)

    2011-07-21

    ... International Trade Administration Renewable Energy and Energy Efficiency Executive Business Development Mission... organizing a Renewable Energy and Energy Efficiency Trade Mission to Turkey on December 4-10, 2011. Led by a... participant's needs. This mission will contribute to the National Export Initiative and the Renewable Energy...

  3. 76 FR 20320 - Renewable Energy and Energy Efficiency Executive Business Development Mission

    Science.gov (United States)

    2011-04-12

    ... International Trade Administration Renewable Energy and Energy Efficiency Executive Business Development Mission... organizing a Renewable Energy and Energy Efficiency Trade Mission to Turkey on October 23-29, 2011. Led by a... participant's needs. This mission will contribute to the National Export Initiative and the Renewable Energy...

  4. 76 FR 57956 - Renewable Energy and Energy Efficiency Executive Business Development Mission; Clarification and...

    Science.gov (United States)

    2011-09-19

    ... International Trade Administration Renewable Energy and Energy Efficiency Executive Business Development Mission... Commercial Service (CS) is publishing this supplement to the Notice of the Renewable Energy and Energy... scheduling constraints permit), interested U.S. renewable energy firms and trade organizations which have not...

  5. 78 FR 26394 - Renewable Energy and Related Services: Recent Developments

    Science.gov (United States)

    2013-05-06

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Renewable Energy and Related Services: Recent Developments AGENCY: United States International..., Renewable Energy and Related Services: Recent Developments. DATES: April 15, 2013: Receipt of the letter...

  6. Considerations for Task Analysis Methods and Rapid E-Learning Development Techniques

    Directory of Open Access Journals (Sweden)

    Dr. Ismail Ipek

    2014-02-01

    Full Text Available The purpose of this paper is to provide basic dimensions for rapid training development in e-learning courses in education and business. Principally, it starts with defining task analysis and how to select tasks for analysis and task analysis methods for instructional design. To do this, first, learning and instructional technologies as visions of the future were discussed. Second, the importance of task analysis methods in rapid e-learning was considered, with learning technologies as asynchronous and synchronous e-learning development. Finally, rapid instructional design concepts and e-learning design strategies were defined and clarified with examples, that is, all steps for effective task analysis and rapid training development techniques based on learning and instructional design approaches were discussed, such as m-learning and other delivery systems. As a result, the concept of task analysis, rapid e-learning development strategies and the essentials of online course design were discussed, alongside learner interface design features for learners and designers.

  7. Water Resources Management for Shale Energy Development

    Science.gov (United States)

    Yoxtheimer, D.

    2015-12-01

    The increase in the exploration and extraction of hydrocarbons, especially natural gas, from shale formations has been facilitated by advents in horizontal drilling and hydraulic fracturing technologies. Shale energy resources are very promising as an abundant energy source, though environmental challenges exist with their development, including potential adverse impacts to water quality. The well drilling and construction process itself has the potential to impact groundwater quality, however if proper protocols are followed and well integrity is established then impacts such as methane migration or drilling fluids releases can be minimized. Once a shale well has been drilled and hydraulically fractured, approximately 10-50% of the volume of injected fluids (flowback fluids) may flow out of the well initially with continued generation of fluids (produced fluids) throughout the well's productive life. Produced fluid TDS concentrations often exceed 200,000 mg/L, with elevated levels of strontium (Sr), bromide (Br), sodium (Na), calcium (Ca), barium (Ba), chloride (Cl), radionuclides originating from the shale formation as well as fracturing additives. Storing, managing and properly disposisng of these fluids is critical to ensure water resources are not impacted by unintended releases. The most recent data in Pennsylvania suggests an estimated 85% of the produced fluids were being recycled for hydraulic fracturing operations, while many other states reuse less than 50% of these fluids and rely moreso on underground injection wells for disposal. Over the last few years there has been a shift to reuse more produced fluids during well fracturing operations in shale plays around the U.S., which has a combination of economic, regulatory, environmental, and technological drivers. The reuse of water is cost-competitive with sourcing of fresh water and disposal of flowback, especially when considering the costs of advanced treatment to or disposal well injection and lessens

  8. [Development of a rapid test kit for antibody to HIV by nano immunomagnetic lateral flow method].

    Science.gov (United States)

    Yang, Fa-qing; Lee, Tony; Wang, Chao-nan; Sun, Shu-ye; Li, Shan-shan; Tian, Hui

    2010-06-01

    To develop a rapid test kit for antibody to HIV by nano immunomagnetic lateral flow method. A rapid test kit was developed by conjugation of the HIV antigen gp41 and gp36 to 200nm super paramagnetic particles by carbodiimide (EDC) and coating of the HIV antigen gp41 and gp36 to nitrocellulose membrane. Then the kit was evaluated with serials of experiments. The kit was qualified with examination of national reference panel of anti-HIV antibody for colloidal gold diagnostic kit. The sensitivity was 100% by tested with 20 HIV antibody positive sera, the specificity was 98.5% by tested with 600 HIV antibody negative sera, respectively. The stability of the kit was over 12 month by storage at room temperature. A diagnostic kit for antibody to HIV was developed with the advantages of convenience, rapid test, good stability and point of care.

  9. 75 FR 29706 - Notice of Funding Availability (NOFA) for Energy Audits and Renewable Energy Development...

    Science.gov (United States)

    2010-05-27

    ... Rural Business-Cooperative Service Notice of Funding Availability (NOFA) for Energy Audits and Renewable.... These are: Guaranteed loans and grants for the development/construction of renewable energy systems and... renewable energy development assistance; and grants for conducting renewable energy feasibility studies. The...

  10. Sustainable Energy Development in Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Mounir Belloumi

    2015-04-01

    Full Text Available The main objective of this research is to study the role of energy consumption in economic growth in Saudi Arabia over the period of 1971–2012 using the autoregressive distributed lag (ARDL cointegration procedure, and based on neoclassical growth, endogenous growth, and ecological-economics viewpoints. Our empirical results show the existence of a cointegrating relationship between the different variables investigated. In addition, all the inputs (conventional and non-conventional Granger cause economic growth in both the short and long runs. Our findings confirm the energy-led growth hypothesis in the case of Saudi Arabia. Hence, energy conservation policies may deteriorate economic growth in Saudi Arabia if they are not followed by measures that improve energy efficiency, energy saving technologies and encourage the investment and use of renewable energy sources such as solar and wind energies that can participate in the attenuation of climate changes.

  11. Development of Hollow Steel Ball Macro-Encapsulated PCM for Thermal Energy Storage Concrete

    OpenAIRE

    Zhijun Dong; Hongzhi Cui; Waiching Tang; Dazhu Chen; Haibo Wen

    2016-01-01

    The application of thermal energy storage with phase change materials (PCMs) for energy efficiency of buildings grew rapidly in the last few years. In this research, octadecane paraffin was served as a PCM, and a structural concrete with the function of indoor temperature control was developed by using a macro-encapsulated PCM hollow steel ball (HSB). The macro-encapsulated PCM-HSB was prepared by incorporation of octadecane into HSBs through vacuum impregnation. Test results showed that the ...

  12. Modeling energy and development: an evaluation of models and concepts

    NARCIS (Netherlands)

    van Ruijven, B.J.|info:eu-repo/dai/nl/304834521; Urban, F.; Benders, R.J.M.; Moll, H.C.; van der Sluijs, J.P.|info:eu-repo/dai/nl/073427489; de Vries, B.|info:eu-repo/dai/nl/068361599; van Vuuren, D.P.

    2008-01-01

    Most global energy models are developed by institutes from developed countries, focusing primarily on issues that are important in industrialized countries. Evaluation of the results for Asia of the IPCC/SRES models shows that broad concepts of energy and development, the energy ladder and the

  13. Modular, Reconfigurable, High-Energy Technology Development

    Science.gov (United States)

    Carrington, Connie; Howell, Joe

    2006-01-01

    The Modular, Reconfigurable High-Energy (MRHE) Technology Demonstrator project was to have been a series of ground-based demonstrations to mature critical technologies needed for in-space assembly of a highpower high-voltage modular spacecraft in low Earth orbit, enabling the development of future modular solar-powered exploration cargo-transport vehicles and infrastructure. MRHE was a project in the High Energy Space Systems (HESS) Program, within NASA's Exploration Systems Research and Technology (ESR&T) Program. NASA participants included Marshall Space Flight Center (MSFC), the Jet Propulsion Laboratory (JPL), and Glenn Research Center (GRC). Contractor participants were the Boeing Phantom Works in Huntsville, AL, Lockheed Martin Advanced Technology Center in Palo Alto, CA, ENTECH, Inc. in Keller, TX, and the University of AL Huntsville (UAH). MRHE's technical objectives were to mature: (a) lightweight, efficient, high-voltage, radiation-resistant solar power generation (SPG) technologies; (b) innovative, lightweight, efficient thermal management systems; (c) efficient, 100kW-class, high-voltage power delivery systems from an SPG to an electric thruster system; (d) autonomous rendezvous and docking technology for in-space assembly of modular, reconfigurable spacecraft; (e) robotic assembly of modular space systems; and (f) modular, reconfigurable distributed avionics technologies. Maturation of these technologies was to be implemented through a series of increasingly-inclusive laboratory demonstrations that would have integrated and demonstrated two systems-of-systems: (a) the autonomous rendezvous and docking of modular spacecraft with deployable structures, robotic assembly, reconfiguration both during assembly and (b) the development and integration of an advanced thermal heat pipe and a high-voltage power delivery system with a representative lightweight high-voltage SPG array. In addition, an integrated simulation testbed would have been developed

  14. Sustainable Development Strategies of Biomass Energy in Beijing

    Science.gov (United States)

    Zhang, H. Z.; Huang, B. R.

    2017-10-01

    The development of biomass energy industry can effectively improve the rural environment and alleviate the shortage of living energy in rural areas, especially in mountain areas. In order to make clear the current situation of biomass energy industry development in Beijing, this paper analyzed the status of biomass resources and biomass energy utilization and discussed the factors hindering the development of biomass energy industry in Beijing. Based on the analysis, suggestions for promoting sustainable development of Biomass Energy Industry in Beijing are put forward.

  15. The role of women in sustainable energy development

    Energy Technology Data Exchange (ETDEWEB)

    Cecelski, E.

    2000-07-13

    This paper explores the question of how sustainable energy development--specifically, decentralized renewable energy technologies--can complement and benefit from the goal of increasing women's role in development. It is based on a paper that was originally presented at the World Renewable Energy Congress-V held in Florence, Italy, in September 1998, as a contribution to the National Renewable Energy Laboratory's program on gender and energy.

  16. Energy Diversity and Development in Kenya

    Science.gov (United States)

    2013-01-01

    efforts to expand this resource.32 Private-sector firms and individual entrepreneurs , to some extent sup- ported by both governmental and nongovern...measure the interference with ecosystems . Kenya desires to encourage investments in clean energy to augment the current energy sources to meet...turbines, and other key energy accessories. Wind remains readily available, and the gov- ernment ought to encourage entrepreneurs to deploy windmills

  17. Designing an energy planning concept for enhancing the dissemination of renewable energy technologies in developing countries

    DEFF Research Database (Denmark)

    Lybæk, Rikke; Andersen, Jan; Lund, Søren

    2014-01-01

    This paper stresses the need for adapting a sustainable energy planning concept, which can support the implementation of renewable energy in developing countries; exemplified by a Vietnamese case. Many developing countries heavily rely on fossil fuel resources and will face energy supply security...... challenges in the future. At the same time their policies on renewable energy, tools and action plans supporting renewables are weak. Thus, to support a local dissemination of renewable energy we suggest applying the sustainable energy planning concept to speed up the utilization of renewables in developing...... countries, while relevant policies, tools and plans etc. simultaneously are being deployed, enhancing the framework conditions for renewable energy implementation...

  18. Using modeling, satellite images and existing global datasets for rapid preliminary assessments of renewable energy resources: The case of Mali

    DEFF Research Database (Denmark)

    Nygaard, Ivan; Rasmussen, K.; Badger, Jake

    2010-01-01

    This paper presents a novel approach to the preliminary, low-cost, national-scale mapping of wind energy, solar energy and certain categories of bio-energy resources in developing countries, using Mali as an example. The methods applied make extensive use of satellite remote sensing and meteorolo...

  19. Rapid E-learning Development Strategies and a Multimedia Project Design Model

    OpenAIRE

    Ömer Faruk Sözcü; İsmail İpek

    2014-01-01

    The purpose of the study is to discuss e-learning design strategies which can be used for multimedia projects as a design model. Recent advances in instructional technologies have been found to be very important in the design of training courses by using rapid instructional design (ID) approaches. The approaches were developed to use in training and developing e-learning projects as well as multimedia design tools. For this reason, this paper will clarify the basic e-learning development tech...

  20. A Plasma-Assisted Route to the Rapid Preparation of Transition-Metal Phosphides for Energy Conversion and Storage

    KAUST Repository

    Liang, Hanfeng

    2017-06-06

    Transition-metal phosphides (TMPs) are important materials that have been widely used in catalysis, supercapacitors, batteries, sensors, light-emitting diodes, and magnets. The physical and chemical structure of a metal phosphide varies with the method of preparation as the electronic, catalytic, and magnetic properties of the metal phosphides strongly depend on their synthesis routes. Commonly practiced processes such as solid-state synthesis and ball milling have proven to be reliable routes to prepare TMPs but they generally require high temperature and long reaction time. Here, a recently developed plasma-assisted conversion route for the preparation of TMPs is reviewed, along with their applications in energy conversion and storage, including water oxidation electrocatalysis, sodium-ion batteries, and supercapacitors. The plasma-assisted synthetic route should open up a new avenue to prepare TMPs with tailored structure and morphology for various applications. In fact, the process may be further extended to the synthesis of a wide range of transition-metal compounds such as borides and fluorides at low temperature and in a rapid manner.

  1. Rapid crystallization of a-Si:H films with various silicon-to-hydrogen bonding configurations using rapid energy transfer annealing

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Y.-L. [Department of Electrical Engineering, National Chung Hsing University, Taichung 402, Taiwan (China)]. E-mail: yljiang@nchu.edu.tw; Chang, Y.-C. [Department of Electrical Engineering, National Chung Hsing University, Taichung 402, Taiwan (China)

    2006-04-03

    Hydrogenated amorphous silicon (a-Si:H) films were prepared by changing substrate temperature of plasma-enhanced chemical vapor deposition to induce different contents of monohydride and polyhydride bonds, which were then crystallized into polysilicon (poly-Si) films by rapid energy transfer annealing. Fourier transform infrared and transmission spectra show that the formation of numerous polyhydride bonds increases the hydrogen content and reduces the refractive index of a-Si:H films. The rise in the concentration of polyhydride bonds in as-deposited a-Si:H films can result in the increase of ultraviolet reflectance, small peak shift, and change in full width at half maximum of Raman scattering and X-ray diffraction peaks of the obtained poly-Si films after annealing. These results demonstrate that high-concentration polyhydride bonds can promote the rapid crystallization of a-Si:H and obtain high-crystallinity poly-Si films. Transmission electron microscopy identifies that the poly-Si films have the typical dendrite-like grain structure.

  2. Sustainable energy landscapes : designing, planning, and development

    NARCIS (Netherlands)

    Stremke, S.; Dobbelsteen, van den A.

    2013-01-01

    In the near future the appearance and spatial organization of urban and rural landscapes will be strongly influenced by the generation of renewable energy. One of the critical tasks will be the re-integration of these sustainable energy landscapes into the existing environment—which people value and

  3. Growing Community Capacity in Energy Development through Extension Education

    Science.gov (United States)

    Romich, Eric; Bowen-Elzey, Nancy

    2013-01-01

    New energy policy, industry regulation, and market investment are influencing the development of renewable energy technologies, setting the stage for rural America to provide the energy of tomorrow. This article describes how Extension's renewable energy programming was implemented in two Ohio communities to engage elected officials and residents…

  4. Energy conservation-problems and perspectives for developing nations

    Energy Technology Data Exchange (ETDEWEB)

    Srinivasan, P.R. (National Productivity Council, New Delhi, India); Padrmanabhan, S.

    1980-03-15

    While studies of the past indicated a tight coupling of energy consumption and GNP, longer range indications are that they can be mutually decoupled. Developing nations can move forward towards achieving significant energy savings in their economics without fear of economic stagnation. Conservation policies at the national level are difficult to enunciate and the implementation mechanisms have to be strengthened. Macro-level economics may not be easily apparent as unit level economics. If energy conservation is not practiced, we would require the development of additional energy supply capacity with all of its economic implications. The role of science and technology inputs in industrial processes for minimizing energy consumption is significant. Sufficient funds should be allocated for pursuance of R and D activities in energy conservation and in developing alternative energy resources to supplement and later replace the existing costly transient fuels. A climate to promote conservation of energy should formulate policies which lays emphasis on energy conservation strategies rather than soley on energy growth issues. The effort should be directed towards energy programs that are a judicious mix up of energy and energy conservation strategies for achieving economic growth and a reasonable standard of living commensurate with the aspirations of the people. In capital-scarce economies, an account of the fact that energy conservation requires far less investment than energy capital supplies, conservation policies must play a central role in the overall framework of developing nation's national energy policies.

  5. current status and outlook of renewable energy development in nigeria

    African Journals Online (AJOL)

    This paper presents a critical review of the available renewable energy resources in Nigeria, namely; biomass, hydropower, solar and wind energy. It examines the current energy situation in the country and equally discusses the various energy policy documents developed by the government. Using the scenario-based ...

  6. Active and energy-dependent rapid formation of cell aggregates in the thermophilic photosynthetic bacterium Chloroflexus aggregans.

    Science.gov (United States)

    Hanada, Satoshi; Shimada, Keizo; Matsuura, Katsumi

    2002-03-05

    The thermophilic filamentous phototroph Chloroflexus aggregans was able to form a bacterial mat-like dense cell aggregate rapidly. The aggregate formation, which was observed in growing cells in a liquid medium in a bottle, occurred every time within 20-30 min after the cells were dispersed by shaking. The aggregation depended on the energy supplied by photosynthesis or respiration. Cells aggregated most rapidly under temperature and pH conditions that support maximum growth. The aggregation was also accelerated by the addition of 3-isobutyl-1-methylxanthine that inhibits cyclic 3',5'-AMP phosphodiesterase. Microscopic observation revealed that the bacterium has a fast gliding mobility (1-3 microm s(-1)). The distinctive cell aggregation of C. aggregans was due to this rapid gliding movement.

  7. Rapid Development of Hybrid Courses for Distance Education: A Midwestern University's Pilot Project

    Science.gov (United States)

    Rust, Jodi

    2011-01-01

    A descriptive case study was used to explore how repurposing and a pedagogical-based instructional design model, the multimodal model (Picciano, 2009), were used to create quality distance education courses in a rapid development setting at a Midwestern land grant university. Data triangulation was used to secure data from faculty member…

  8. Rapid E-learning Development Strategies and a Multimedia Project Design Model

    Science.gov (United States)

    Sözcü, Ömer Faruk; Ipek, Ismail

    2014-01-01

    The purpose of the study is to discuss e-learning design strategies which can be used for multimedia projects as a design model. Recent advances in instructional technologies have been found to be very important in the design of training courses by using rapid instructional design (ID) approaches. The approaches were developed to use in training…

  9. Experiments in rapid development of accurate phonetic alignments for TTS in Afrikaans

    CSIR Research Space (South Africa)

    Van Niekerk, DR

    2011-11-01

    Full Text Available The quality of corpus-based text-to-speech (TTS) systems depends on the accuracy of phonetic annotation (alignments) which directly influences the process of acoustic modelling. In this paper the author discusses the rapid development of accurate...

  10. Development of flexural vibration inspection techniques to rapidly assess the structural health of rural bridge systems

    Science.gov (United States)

    Brian K. Brashaw; Robert Vatalaro; Xiping Wang; Kevin Sarvela; James P. Wacker

    2008-01-01

    Approximately 4,000 vehicle bridges in the State of Minnesota contain structural timber members. Recent research at the University of Minnesota Duluth Natural Resources Research Institute (UMD NRRI) has been conducted on vibration testing of timber bridges as a means of developing rapid in-place testing techniques for assessing the structural health of bridges. The...

  11. Developing an Energy Performance Modeling Startup Kit

    Energy Technology Data Exchange (ETDEWEB)

    Wood, A.

    2012-10-01

    In 2011, the NAHB Research Center began the first part of the multi-year effort by assessing the needs and motivations of residential remodelers regarding energy performance remodeling. The scope is multifaceted - all perspectives will be sought related to remodeling firms ranging in size from small-scale, sole proprietor to national. This will allow the Research Center to gain a deeper understanding of the remodeling and energy retrofit business and the needs of contractors when offering energy upgrade services. To determine the gaps and the motivation for energy performance remodeling, the NAHB Research Center conducted (1) an initial series of focus groups with remodelers at the 2011 International Builders' Show, (2) a second series of focus groups with remodelers at the NAHB Research Center in conjunction with the NAHB Spring Board meeting in DC, and (3) quantitative market research with remodelers based on the findings from the focus groups. The goal was threefold, to: Understand the current remodeling industry and the role of energy efficiency; Identify the gaps and barriers to adding energy efficiency into remodeling; and Quantify and prioritize the support needs of professional remodelers to increase sales and projects involving improving home energy efficiency. This report outlines all three of these tasks with remodelers.

  12. Sustainable development in Pemex: energy management

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez, C.E.R. [Petroleos Mexicanos, Mexico (Mexico)

    2002-06-01

    In this paper, the author reviewed the energy management activities, over the last two years, of Petroleos Mexicanos, also known as Pemex. These activities generated substantial savings. A brief overview of Pemex was provided. The State Oil Company of Mexico, Pemex occupies the third rank of the world oil producers, and is in seventh place in terms of proven reserves. The gas production has earned the company the ninth spot, and it is in tenth place as far as its refining capacity is concerned. Pemex has annual revenues of 50, 000 million American dollars and operates in excess of 1,000 facilities. The energy management program implemented covered an experts network, training, campaigns, and information and monitoring system. Each of the components of the energy management system were reviewed. Linking each facility, the experts network was created to enhance the efficient use of energy. The Energy Saving and Environmental Protection campaign was held over the period 1999-2000 and involved the participation of 209 work sites. For its part, the Energy Efficient Use and Savings campaign took place in 2000-2001, involving 205 work sites. Both resulted in substantial savings. An internal carbon dioxide trading system was also implemented to improve air quality, and was designed to provide a cap and trade carbon dioxide emissions. The next phase involved the implementation of an information and monitoring system, which defined an Energy Consumption Index used in monthly reports. The next steps in the process were briefly outlined. 5 figs.

  13. Rapid Determination of Biochar Energy Quality Based on Visible and Near-infrared Spectroscopy (400-1000nm)

    OpenAIRE

    Yang Hai-Qing; Guo Geng-Xin; Ji Jian-Bing

    2016-01-01

    Rapid determination of biochar energy quality is fundamental for the purpose of biomass efficient utilization. In this work, visible and near-infrared spectroscopy was used to measure ash, volatile matter, fixed carbon content and calorific value of biochar samples produced at different pyrolysis temperatures from agricultural biomass feedstocks. Biochar samples were detected by a USB4000 spectrometer with 400-1000nm reflectance spectra recorded for investigation. The spectra were transformed...

  14. Consumption of energy drinks by children and young people: a rapid review examining evidence of physical effects and consumer attitudes

    OpenAIRE

    Visram, Shelina; Cheetham, Mandy; Riby , Deborah, M.; Crossley, Stephen; Lake, Amelia; UKCRC Centre for Translational Research in Public Health (FUSE)

    2016-01-01

    Objective To examine patterns of energy drink consumption by children and young people, attitudes towards these drinks, and any associations with health or other outcomes. Design Rapid evidence assessment and narrative synthesis. Data sources 9 electronic bibliographic databases, reference lists of relevant studies and searches of the internet. Results A total of 410 studies were located, with 46 meeting the inclusion criteria. The majority employed a cross-sectional design, invol...

  15. 77 FR 53233 - Renewable Energy and Related Services: Recent Developments

    Science.gov (United States)

    2012-08-31

    ... COMMISSION Renewable Energy and Related Services: Recent Developments AGENCY: United States International... (Commission) instituted investigation No. 332-534, Renewable Energy and Related Services: Recent Developments... services, and a second on renewable energy and related services, and deliver the reports in 8 and 11 months...

  16. The United Nations development programme initiative for sustainable energy

    Energy Technology Data Exchange (ETDEWEB)

    Hurry, S.

    1997-12-01

    Energy is central to current concerns about sustainable human development, affecting economic and social development; economic growth, the local, national, regional, and global environment; the global climate; a host of social concerns, including poverty, population, and health, the balance of payments, and the prospects for peace. Energy is not an end in itself, but rather the means to achieve the goals of sustainable human development. The energy systems of most developing countries are in serious crisis involving insufficient levels of energy services, environmental degradation, inequity, poor technical and financial performance, and capital scarcity. Approximately 2.5 billion people in the developing countries have little access to commercial energy supplies. Yet the global demand for energy continues to grow: total primary energy is projected to grow from 378 exajoules (EJ) per year in 1990 to 571 EJ in 2020, and 832 EJ in 2050. If this increase occurs using conventional approaches and energy sources, already serious local (e.g., indoor and urban air pollution), regional (eg., acidification and land degradation), and global (e.g., climate change) environmental problems will be critically aggravated. There is likely to be inadequate capital available for the needed investments in conventional energy sources. Current approaches to energy are thus not sustainable and will, in fact, make energy a barrier to socio-economic development. What is needed now is a new approach in which energy becomes an instrument for sustainable development. The two major components of a sustainable energy strategy are (1) more efficient energy use, especially at the point of end-use, and (2) increased use of renewable sources of energy. The UNDP Initiative for Sustainable Energy (UNISE) is designed to harness opportunities in these areas to build upon UNDP`s existing energy activities to help move the world toward a more sustainable energy strategy by helping program countries.

  17. Effect of brief daily resistance training on rapid force development in painful neck and shoulder muscles

    DEFF Research Database (Denmark)

    Jay, Kenneth; Schraefel, Mc; Andersen, Christoffer H

    2013-01-01

    performed maximal voluntary contractions at a static 90-degree shoulder joint angle. Rapid force development was determined as the rate of torque development and maximal muscle strength was determined as the peak torque. RESULTS: Compared with the control group, rate of torque development increased 31.0 Nm......OBJECTIVE: To determine the effect of small daily amounts of progressive resistance training on rapid force development of painful neck/shoulder muscles. METHODS: 198 generally healthy adults with frequent neck/shoulder muscle pain (mean: age 43.1 years, computer use 93% of work time, 88% women.......05) for both training groups. Maximal muscle strength increased only ~5-6% [mean and 95% confidence interval for 2- and 12-min groups to control, respectively: 2.5 Nm (0.05-0.73) and 2.2 Nm (0.01-0.70)]. No significant differences between the 2- and 12-min groups were evident. A weak but significant...

  18. New developments in the Danish Wind Energy Policy

    Energy Technology Data Exchange (ETDEWEB)

    Lemming, J. [Danish Energy Agency, Copenhagen (Denmark)

    1996-12-31

    Wind energy resources in Denmark are among the best in Europe. In recent years there has been a rapid growth in number of wind turbines connected to the grid in Denmark. By the end of 1995 more than 3800 wind turbines were installed on-shore with a capacity of over 600 MW. The total production of electricity from these turbines in 1995 was more than 1200 GWh, corresponding to approximately 3.6 % of the Danish electricity consumption. For several years Denmark has pursued an energy policy with an increasing weight on environmental aspects and new and renewable energy sources like wind energy. Therefore wind energy already plays an important part as supplement to the traditional sources of fuel in the electricity production, and the share of wind energy and other renewables is expected to increase significantly in the years to come. 1 ref., 9 figs.

  19. Tribal Energy Efficiency and Renewable Energy Development on Tribal Lands (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2010-09-01

    This 12-page brochure provides an overview of the U.S. Department of Energy's (DOE's) Tribal Energy Program and describes the financial, technical, and educational assistance it provides to help tribes develop their renewable energy resources and reduce their energy consumption.

  20. Development of a method for holistic energy renovation

    DEFF Research Database (Denmark)

    Morelli, Martin

    Development of a method for holistic energy renovation During the last decade, the European Union has worked intensively to improve the energy efficiency in the building sector, aiming at liberation from the use of fossil fuels. The focus has shifted from new energy efficient buildings towards...... existing buildings. This implies that energy renovation likely will be intensified in the coming years. A method for holistic energy renovation was developed that embraced the viability of the whole building renovation as well as the design of the energy saving measures. The focus was on multi...... envelope and mechanical ventilation. Subsequently, a method was developed for a componentbased economical optimisation using the energy price for renewable energy as constraint. The results from both investigations showed an approximately 70% reduction for the theoretical energy usage. An economical...

  1. Research and development of energy harvesting from vibrations and human motions (Conference Presentation)

    Science.gov (United States)

    Liao, Wei-Hsin

    2017-04-01

    Most of the ambient energy, which was regarded useless in the past, now is under the spotlight. With the rapid developments on low power electronics, future personal mobile devices and remote sensing systems might become self-powered by scavenging energy in different forms from their surroundings. Kinetic energy is one of the promising energy forms in our living environment, e.g., human motions and vibrations. We have proposed an energy flow to clarify the functions of piezoelectric energy harvesting, dissipation, and their effects on the structural damping of vibrating structures. Impedance modeling and analysis were performed. We have designed an improved self-powered switching interface for piezoelectric energy harvesting circuits. With electromagnetic transduction, we also proposed a knee-mounted energy harvester that could convert the mechanical power from knee joints into electricity during walking. On the other hand, we have developed magnetorheological (MR) fluid devices with multiple functions, including rotary actuators and linear dampers. Multifunctional rotary actuator was designed to integrate motor/generator part and MR fluids into a single device. The actuator could function as motor, generator, clutch and brake, with compact size and good energy efficiency. In addition, novel self-sensing MR dampers with power generation, so as to integrate the dynamic sensing, controllable damping and power generation functions, were developed and investigated. Prototypes were fabricated and tested. The developed actuators were promising for various applications. In this paper, related research in energy harvesting done at The Chinese University of Hong Kong and key results will be presented.

  2. Discussion and suggestion on the development of new energy

    Science.gov (United States)

    Zhang, Weiwei

    2017-05-01

    The article makes a series of discussion on the current development of new energy. Now the new energy industry is booming, but there are both advantages and disadvantages in the process of development. We should give a comprehensive and objective approach to some existing problems in the development of new energy, improve the level of science and technology, and make efforts to achieve the sustainable development.

  3. Development of Experimental Setup of Metal Rapid Prototyping Machine using Selective Laser Sintering Technique

    Science.gov (United States)

    Patil, S. N.; Mulay, A. V.; Ahuja, B. B.

    2016-08-01

    Unlike in the traditional manufacturing processes, additive manufacturing as rapid prototyping, allows designers to produce parts that were previously considered too complex to make economically. The shift is taking place from plastic prototype to fully functional metallic parts by direct deposition of metallic powders as produced parts can be directly used for desired purpose. This work is directed towards the development of experimental setup of metal rapid prototyping machine using selective laser sintering and studies the various parameters, which plays important role in the metal rapid prototyping using SLS technique. The machine structure in mainly divided into three main categories namely, (1) Z-movement of bed and table, (2) X-Y movement arrangement for LASER movements and (3) feeder mechanism. Z-movement of bed is controlled by using lead screw, bevel gear pair and stepper motor, which will maintain the accuracy of layer thickness. X-Y movements are controlled using timing belt and stepper motors for precise movements of LASER source. Feeder mechanism is then developed to control uniformity of layer thickness metal powder. Simultaneously, the study is carried out for selection of material. Various types of metal powders can be used for metal RP as Single metal powder, mixture of two metals powder, and combination of metal and polymer powder. Conclusion leads to use of mixture of two metals powder to minimize the problems such as, balling effect and porosity. Developed System can be validated by conducting various experiments on manufactured part to check mechanical and metallurgical properties. After studying the results of these experiments, various process parameters as LASER properties (as power, speed etc.), and material properties (as grain size and structure etc.) will be optimized. This work is mainly focused on the design and development of cost effective experimental setup of metal rapid prototyping using SLS technique which will gives the feel of

  4. Models for Very Rapid High-Energy γ-Ray Variability in Blazars G. E. ...

    Indian Academy of Sciences (India)

    Some of the ideas and models proposed then to explain the origin of phenomenon ... 2012), producing a rapid succession of short γ-ray flares, as ... origin. Finally, we show a wide variety of light curves that are attainable in our model by changing within a reasonable range of values, the parameters related to different.

  5. Models for Very Rapid High-Energy -Ray Variability in Blazars

    Indian Academy of Sciences (India)

    We present a family of models for rapid -ray variability in blazars based on a two-component jet. Fast variability occurs when relativistic electron–positron pairs interact with small-scale perturbations in the inner jet. These perturbations are produced by Kelvin–Helmholtz instabilities. We fit the minute-scale strong variability ...

  6. The Water Demand of Energy: Implications for Sustainable Energy Policy Development

    Directory of Open Access Journals (Sweden)

    Kaveh Madani

    2013-11-01

    Full Text Available With energy security, climate change mitigation, and sustainable development as three main motives, global energy policies have evolved, now asking for higher shares of renewable energies, shale oil and gas resources in the global energy supply portfolios. Yet, concerns have recently been raised about the environmental impacts of the renewable energy development, supported by many governments around the world. For example, governmental ethanol subsidies and mandates in the U.S. are aimed to increase the biofuel supply while the water footprint of this type of energy might be 70–400 times higher than the water footprint of conventional fossil energy sources. Hydrofracking, as another example, has been recognized as a high water-intensive procedure that impacts the surface and ground water in both quality and quantity. Hence, monitoring the water footprint of the energy mix is significantly important and could have implications for energy policy development. This paper estimates the water footprint of current and projected global energy policies, based on the energy production and consumption scenarios, developed by the International Energy Outlook of the U.S. Energy Information Administration. The outcomes reveal the amount of water required for total energy production in the world will increase by 37%–66% during the next two decades, requiring extensive improvements in water use efficiency of the existing energy production technologies, especially renewables.

  7. THE RENEWABLE ENERGY PRODUCTION-ECONOMIC DEVELOPMENT NEXUS

    Directory of Open Access Journals (Sweden)

    Gorkemli Kazar

    2014-04-01

    Full Text Available As renewable energy requirements increases, its relation with development is controversial. In this study, by taking human development index for development level, the relationship between renewable electricity net generation values and development has been searched with panel analysis. Study covers two different time periods: 1980-2010 with 5 year data to analyze long term effects and 2005-2010 yearly data for short term effects. Unlike previous studies, energy generation has been taken into consideration for it is thought to be more related with economic development. It is found that in the long run economic development will be leading to renewable energy production, while in the short run there exists a bidirectional causal relationship between renewable energy production and economic development. In addition, the causal relationship between economic development and renewable energy production varies both in the long run and in the short run due to human development level of the countries.

  8. READERS: Rapid English Assimilation Developing English Reading and Speaking; Social and Academic Implications of English Proficiency amongst Children

    Science.gov (United States)

    Seaton, Russell

    2017-01-01

    The READERS (Rapid English Assimilation Developing English Reading and Speaking) program is designed to facilitate teachers and students in rapid English assimilation, focusing on grammar and verbal recall as pertaining to the English language. The purpose of this qualitative method case study was to investigate the effects of rapid English…

  9. Technology assessment of geothermal energy resource development

    Energy Technology Data Exchange (ETDEWEB)

    1975-04-15

    Geothermal state-of-the-art is described including geothermal resources, technology, and institutional, legal, and environmental considerations. The way geothermal energy may evolve in the United States is described; a series of plausible scenarios and the factors and policies which control the rate of growth of the resource are presented. The potential primary and higher order impacts of geothermal energy are explored, including effects on the economy and society, cities and dwellings, environmental, and on institutions affected by it. Numerical and methodological detail is included in appendices. (MHR)

  10. IL-6 trans-Signaling-Dependent Rapid Development of Cytotoxic CD8+ T Cell Function

    Directory of Open Access Journals (Sweden)

    Jan P. Böttcher

    2014-09-01

    Full Text Available Immune control of infections with viruses or intracellular bacteria relies on cytotoxic CD8+ T cells that use granzyme B (GzmB for elimination of infected cells. During inflammation, mature antigen-presenting dendritic cells instruct naive T cells within lymphoid organs to develop into effector T cells. Here, we report a mechanistically distinct and more rapid process of effector T cell development occurring within 18 hr. Such rapid acquisition of effector T cell function occurred through cross-presenting liver sinusoidal endothelial cells (LSECs in the absence of innate immune stimulation and known costimulatory signaling. Rather, interleukin-6 (IL-6 trans-signaling was required and sufficient for rapid induction of GzmB expression in CD8+ T cells. Such LSEC-stimulated GzmB-expressing CD8+ T cells further responded to inflammatory cytokines, eliciting increased and protracted effector functions. Our findings identify a role for IL-6 trans-signaling in rapid generation of effector function in CD8+ T cells that may be beneficial for vaccination strategies.

  11. 75 FR 76455 - Coso Energy Developers; Coso Finance Partners; Coso Power Developers; Notice Of Filing

    Science.gov (United States)

    2010-12-08

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Coso Energy Developers; Coso Finance Partners; Coso Power Developers; Notice... Finance Partners, and Coso Power Developers, pursuant to section 207 of the Federal Energy Regulatory...

  12. Capacity building in renewable energy technologies in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Fridleifsson, Ingvar

    2010-09-15

    The renewable energy sources are expected to provide 20-40% of the world primary energy in 2050, depending on scenarios. A key element in the mitigation of climate change is capacity building in renewable energy technologies in the developing countries, where the main energy use growth is expected. An innovative training programme for geothermal energy professionals developed in Iceland is an example of how this can be done effectively. In 1979-2009, 424 scientists/engineers from 44 developing countries have completed the 6 month courses. In many countries in Africa, Asia, C-America, and E-Europe, UNU-GTP Fellows are among the leading geothermal specialists.

  13. Colorado Plateau Rapid Ecoregion Assessment Change Agents - Development - Current, Near-Term, and Long-Term Potential High Landscape Development

    Data.gov (United States)

    Bureau of Land Management, Department of the Interior — This map shows areas of high current, near-term, and long-term potential landscape development, based on factors such as urban areas, agriculture, roads, and energy...

  14. Development potential of wind energy in Turkey

    Directory of Open Access Journals (Sweden)

    İsmet Akova

    2011-07-01

    Full Text Available L’énergie en Turquie est aujourd’hui fournie par l’énergie fossile. De plus, la Turquie est dépendante de l’extérieur en matière d’énergie pour son économie et les secteurs divers qui en ont besoin. En Turquie, parallèlement aux informations ci-dessus, 83% de l’électricité de l’an 2008 provient des sources d’énergie fossile. Les perspectives d'avenir prévoient que la demande d’énergie de la Turquie augmentera et l’effet naturel de cette croissance sera l’augmentation du taux de dépendance énergétique à l'égard des autres pays. Les travaux effectués démontrent que, parmi les sources d’énergies renouvelables de la Turquie, le pouvoir hydraulique et le potentiel d’énergie éolienne sont les plus importants et que chacune de ces deux sources ont des potentiels techniques pour la production de l’électricité. La multiplication des centrales éoliennes au cours de ces dernières années est à relier à des facteurs comme la préparation de l’Atlas d’Energie Eolienne Turc, la disposition des lois afin d’aider les entrepreneurs du secteur privé et l’augmentation des prix du pétrole. Les centrales éoliennes fonctionneront dans la région de Marmara, la région d’Egée et dans la partie de méditerranée orientale de la Turquie où se manifestent plus souvent les vents violents. Il est probable que quelques autres centrales seront construites dans d'autres régions que celles citées précédemment.Covering its energy requirement from fossil energy sources for the most part, Turkey relies on outside sources to procure energy required for its economy and different sectors. Similarly, Turkey had produced 83 pct of the overall electricity in 2008 out of fossil energy sources. Future projectors indicate that the energy requirement of our country would augment and foreign-dependency in energy would thus increase accordingly.  The on-going studies state that especially hydraulic power and wind

  15. Geothermal Energy Development annual report 1979

    Energy Technology Data Exchange (ETDEWEB)

    1980-08-01

    This report is an exerpt from Earth Sciences Division Annual Report 1979 (LBL-10686). Progress in thirty-four research projects is reported including the following area: geothermal exploration technology, geothermal energy conversion technology, reservoir engineering, and geothermal environmental research. Separate entries were prepared for each project. (MHR)

  16. Energy development in the Great Basin

    Science.gov (United States)

    Nora Devoe

    2008-01-01

    The United States, with less than 5 percent of the world’s population, consumes 40 percent of the oil and 23 percent of natural gas annual global production. Fluctuating and rising energy prices can be expected to continue with political instability in producing countries and intensifying supply competition from expanding Asian economies. The United States seeks to...

  17. Implementation of sustainable energy programs in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Spitalnik, J. [FEBRAE, Rio Janeiro (Brazil)

    2001-07-01

    Energy, a major contributor to development, is an essential element for increasing quality of life. During the next decades, the developing world will experience an explosive increase of energy demand, requiring enormous efforts and ingenuity to be fully satisfied. Delays may create public frustration for not achieving paradigm levels of quality of life, giving eventually rise to serious pressures on governments. The concept of sustainable energy options for development cannot be analyzed under the same prism in developed and developing countries. The relative degree of a country development should be introduced when setting up the path to sustainable development. (author)

  18. Planar array stack design aided by rapid prototyping in development of air-breathing PEMFC

    Science.gov (United States)

    Chen, Chen-Yu; Lai, Wei-Hsiang; Weng, Biing-Jyh; Chuang, Huey-Jan; Hsieh, Ching-Yuan; Kung, Chien-Chih

    The polymer electrolyte membrane fuel cell (PEMFC) is one of the most important research topics in the new and clean energy area. The middle or high power PEMFCs can be applied to the transportation or the distributed power system. But for the small power application, it is needed to match the power requirement of the product generally. On the other hand, the direct methanol fuel cell (DMFC) is one of the most common type that researchers are interested in, but recently the miniature or the micro-PEMFCs attract more attention due to their advantages of high open circuit voltage and high power density. The objective of this study is to develop a new air-breathing planar array fuel cell stacked from 10 cells made by rapid prototyping technology which has potential for fast commercial design, low cost manufacturing, and even without converters/inverters for the system. In this paper, the main material of flow field plates is acrylonitrile-butadiene-styrene (ABS) which allows the fuel cell be mass-manufactured by plastic injection molding technology. The rapid prototyping technology is applied to construct the prototype and verify the practicability of the proposed stack design. A 10-cell air-breathing miniature PEMFC stack with a volume of 6 cm × 6 cm × 0.9 cm is developed and tested. Its segmented membrane electrode assembly (MEA) is designed with the active surface area of 1.3 cm × 1.3 cm in each individual MEA. The platinum loading at anode and cathode are 0.2 mg cm -2 and 0.4 mg cm -2, respectively. Results show that the peak power densities of the parallel connected and serial connected stack are 99 mW cm -2 at 0.425 V and 92 mW cm -2 at 4.25 V, respectively under the conditions of 70 °C relative saturated humidity (i.e., dew point temperature), ambient temperature and free convection air. Besides, the stack performance is increased under forced convection. If the cell surface air is blown by an electric fan, the peak power densities of parallel connected and

  19. Planar array stack design aided by rapid prototyping in development of air-breathing PEMFC

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Chen-Yu.; Lai, Wei-Hsiang [Institute of Aeronautics and Astronautics, National Cheng Kung University, No.1, Ta-Hsueh Road, Tainan 701 (China); Weng, Biing-Jyh; Chuang, Huey-Jan; Hsieh, Ching-Yuan; Kung, Chien-Chih [Chung-Shan Institute of Science and Technology, Materials and Electro-Optics Research Division, P.O. Box No. 90008-8-3 Lung-Tan, Tao-Yuan 325 (China)

    2008-04-15

    The polymer electrolyte membrane fuel cell (PEMFC) is one of the most important research topics in the new and clean energy area. The middle or high power PEMFCs can be applied to the transportation or the distributed power system. But for the small power application, it is needed to match the power requirement of the product generally. On the other hand, the direct methanol fuel cell (DMFC) is one of the most common type that researchers are interested in, but recently the miniature or the micro-PEMFCs attract more attention due to their advantages of high open circuit voltage and high power density. The objective of this study is to develop a new air-breathing planar array fuel cell stacked from 10 cells made by rapid prototyping technology which has potential for fast commercial design, low cost manufacturing, and even without converters/inverters for the system. In this paper, the main material of flow field plates is acrylonitrile-butadiene-styrene (ABS) which allows the fuel cell be mass-manufactured by plastic injection molding technology. The rapid prototyping technology is applied to construct the prototype and verify the practicability of the proposed stack design. A 10-cell air-breathing miniature PEMFC stack with a volume of 6 cm x 6 cm x 0.9 cm is developed and tested. Its segmented membrane electrode assembly (MEA) is designed with the active surface area of 1.3 cm x 1.3 cm in each individual MEA. The platinum loading at anode and cathode are 0.2 mg cm{sup -2} and 0.4 mg cm{sup -2}, respectively. Results show that the peak power densities of the parallel connected and serial connected stack are 99 mW cm{sup -2} at 0.425 V and 92 mW cm{sup -2} at 4.25 V, respectively under the conditions of 70 C relative saturated humidity (i.e., dew point temperature), ambient temperature and free convection air. Besides, the stack performance is increased under forced convection. If the cell surface air is blown by an electric fan, the peak power densities of

  20. Rapid tolerance development to the NREM sleep promoting effect of alcohol.

    Science.gov (United States)

    Sharma, Rishi; Sahota, Pradeep; Thakkar, Mahesh M

    2014-04-01

    Alcohol tolerance is a major contributor towards the development of alcohol dependence. Does alcohol intake result in rapid tolerance development to alcohol induced NREM sleep promotion? This has never been examined. Our objective was to examine whether two bouts of alcohol consumption on consecutive days results in rapid tolerance development to alcohol-induced NREM sleep promotion. N/A. N/A. C57BL/6J mice. Mice (N = 5) were implanted with sleep electrodes using standard surgical conditions. Following postoperative recovery and habituation, the experiment was begun. On baseline day, water bottle changes were performed at 10:00 (3 h after dark onset) and 14:00 to mimic conditions during alcohol consumption days. On next 2 days, (Days 1 and 2) mice were allowed to self-administer alcohol (20% v/v) for 4 h beginning at 10:00 and ending at 14:00. Sleep-wakefulness was continuously recorded from 10:00 to 18:00 (8 h; 4 h during alcohol + 4 h post-alcohol) on all 3 days. Although mice consumed comparable amounts of alcohol on Days 1 and 2, NREM sleep and wakefulness were significantly and differentially affected during 4 h post-alcohol period. A robust alcohol-induced NREM sleep promotion was observed on Day 1. However, no such sleep promotion was observed on Day 2, suggesting rapid tolerance development. Our study is the first to demonstrate that alcohol consumption for two consecutive days results in development of rapid tolerance to alcohol-induced sleep promotion.

  1. NLO Vertex for a Forward Jet plus a Rapidity Gap at High Energies

    CERN Document Server

    Hentschinski, Martin; Murdaca, Beatrice; Vera, Agustín Sabio

    2015-01-01

    We present the calculation of the forward jet vertex associated to a rapidity gap (coupling of a hard pomeron to the jet) in the BFKL formalism at next-to-leading order (NLO). Real emission contributions are computed via Lipatov's effective action. The NLO jet vertex turns out to be finite within collinear factorization and allows, together with the NLO non-forward gluon Green's function, to perform NLO studies of jet production in diffractive events (e.g. Mueller-Tang dijets).

  2. Iron Oxide Films Prepared by Rapid Thermal Processing for Solar Energy Conversion

    DEFF Research Database (Denmark)

    Wickman, B.; da Silva Fanta, Alice Bastos; Burrows, Andrew

    2017-01-01

    Hematite is a promising and extensively investigated material for various photoelectrochemical (PEC) processes for energy conversion and storage, in particular for oxidation reactions. Thermal treatments during synthesis of hematite are found to affect the performance of hematite electrodes...

  3. BLACKFEET NATION FIRST STEPS TO RENEWABLE ENERGYENERGY ORGANIZATION DEVELOPMENT PROJECT FINAL REPORT

    Energy Technology Data Exchange (ETDEWEB)

    JERI LAWRENCE, RENEWABLE ENERGY DIRECTOR

    2008-05-14

    The Blackfeet Nation Energy Organization Development project, which was funded through the auspices of the Department of Energy First Steps to Renewable Energy Grant, has produced a centralized effort that assists the Blackfeet Tribal Business Council in the proper management, development, and informed decision making ability to negotiate and develop Blackfeet Renewable Energy opportunities, with a special emphasis on wind energy development. In addition, the Blackfeet Nation has been armed with an enhanced ability to examine environmental and legal issues, perform market research, identify additional lands for possible acquisition and development, and examine wind energy projects by other tribes that serve as models. The product of this effort has been that the Blackfeet Nation formerly petitioned the Bureau of Indian Affairs to approve and charter an Indian Reorganization Act, Section 17 Corporation, the Blackfeet Renewable Energy Inc. Please See Attachment.

  4. Utility and Usability of the Rapid Assessment of Hospital Procurement Barriers in Donation (RAPiD) as a Tool for OPO Hospital Development Staff.

    Science.gov (United States)

    Alolod, Gerard P; Traino, Heather M; Siminoff, Laura A

    2016-09-01

    Few systematic assessment tools are available to organ procurement organizations (OPOs) for evaluating donation climates of hospitals in their donation service areas (DSAs). The Rapid Assessment of hospital Procurement barriers in Donation (RAPiD) was developed for OPO hospital development staff to assess the organ donation climate of hospitals. To implement a national test of the RAPiD to examine its efficacy and usability by OPO hospital development staff. Two-arm randomized design, comparing implementation of RAPiD protocol between qualitatively trained researchers (n = 7) and OPO hospital development staff (n = 24); all evaluators received the same training assessments of high-yield hospitals. A total of 77 hospitals in DSAs of 8 OPOs. A total of 2552 health-care providers (HCPs) in high organ donor potential units. Twenty-four donation-related attitudes, knowledge, and behaviors. More HCPs interviewed in the autonomous condition were positive toward the concept of organ donation. However, HCPs in the assisted condition were more candid about and critical of the OPO. As for knowledge, fewer HCPs in the autonomous condition reported familiarity with the donation process, need for donors, and generally accepted timely referral criteria. With respect to behaviors, more respondents in the autonomous condition reported frequent or occasional contact with the OPO and routine or occasional referral criteria use. Due to issues of bias, inadequate research experience, conflicts of interest, and ongoing OPO hospital development initiatives, the RAPiD's usability by OPO-based hospital development staff is questionable and not recommended in its current form. A next generation of the RAPiD is described for future consideration. © 2016, NATCO.

  5. Variables Affecting Economic Development of Wind Energy

    Energy Technology Data Exchange (ETDEWEB)

    Lantz, E.; Tegen, S.

    2008-07-01

    NREL's JEDI Wind model performed an analysis of wind-power-related economic development drivers. Economic development benefits for wind and coal were estimated using NREL's JEDI Wind and JEDI Coal models.

  6. Trends and Patterns of Household Energy Use: Developing ...

    African Journals Online (AJOL)

    Ethiopia is a nation with a diverse culture and diverse energy potential for development. Studies estimate that over 80 per cent of the primary energy sources in the country are traditional. The aim of this study is to: explain the trends and patterns of household energy use in Adigrat town; analyse the effects of current ...

  7. Model projections for household energy use in developing countries

    NARCIS (Netherlands)

    Daioglou, V.; Ruijven, B.J. van; Vuuren, D.P. van

    2012-01-01

    The residential sector plays an important role in the energy system of developing countries. In this paper we introduce a bottom up simulation model for household energy use. The model describes energy demand for several end-use functions based on a set of physical drivers, such as floor space and

  8. Development of rapid methods for relaxation time mapping and motion estimation using magnetic resonance imaging

    OpenAIRE

    Gilani, Syed Irtiza Ali

    2008-01-01

    Recent technological developments in the field of magnetic resonance imaging have resulted in advanced techniques that can reduce the total time to acquire images. For applications such as relaxation time mapping, which enables improved visualisation of in vivo structures, rapid imaging techniques are highly desirable. TAPIR is a Look- Locker-based sequence for high-resolution, multislice T1 relaxation time mapping. Despite the high accuracy and precision of TAPIR, an improveme...

  9. Public-Private Partnership for Regional Development of Renewable Energy

    Directory of Open Access Journals (Sweden)

    Andreea ZAMFIR

    2011-11-01

    Full Text Available This study investigates the public-private partnership as a possible solution for regional development of renewable energy. Firstly, the study reveals the strong connection between renewable energy and sustainable regional development, and secondly, the study discloses some reasons for developing renewable energy through public-private partnerships in Romania’s regions. The findings of this study reveal that there is a strong need for a renewable energy partnership between public authorities, business community and civil society in order to achieve the regional development of renewable energy. The results of this study may be used for upcoming research in the area of implementing renewable energy projects through public-private partnerships in order to achieve sustainable regional development.

  10. Development of a loop-mediated isothermal amplification method for rapid detection of pigeon circovirus.

    Science.gov (United States)

    Tsai, Shinn Shyong; Chang, Yeng Ling; Huang, Yen Li; Liu, Hung Jen; Ke, Guan Ming; Chiou, Chwei Jang; Hsieh, Yao Ching; Chang, Tsung Chou; Cheng, Li Ting; Chuang, Kuo Pin

    2014-05-01

    There are no effective antiviral treatments for pigeon circovirus (PiCV); thus, rapid diagnosis is critical for effective control of the disease caused by this virus. The recent development of a novel LAMP technique that amplifies nucleic acids rapidly with high specificity and sensitivity under isothermal conditions has overcome some of the deficiencies of nucleic-acid-based diagnostic tests. We established a LAMP method for rapid detection of PiCV using two pairs of primers that were designed from PiCV and compared its sensitivity and specificity with that of PCR. Amplification by LAMP was optimal at 63 °C for 60 min. The detection limit was nearly 0.5 pg of PiCV DNA, making it ten times more sensitive than PCR. There was no cross-reaction with porcine circovirus type 2 (PCV2), pigeon Trichomonas gallinae, or pigeon herpesvirus (PHV) under the same conditions. The assay also successfully detected the pathogen DNA in the tissues of infected pigeons. This is the first report indicating that LAMP is a valuable, rapid method of detecting PiCV with high sensitivity and specificity.

  11. Developing Research Capabilities in Energy Biosciences

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Donald D.

    2008-01-01

    Scientists founded the Life Sciences Research Foundation (LSRF) in 1983 as a non-profit pass through foundation that awards post doctoral fellowships in all areas of the life sciences. LSRF scientists review hundreds of applications each year from PhDs seeking support. For example this year, our 26th, we received 800 applications and our peer review committee will choose about 50 finalists who are eligible for these awards. We have no endowment so we solicit sponsors each year. The fellowships are sponsored by research oriented companies, foundations, philanthropists, the Howard Hughes Medical Institute, and other organizations who believe in the value of awarding fellowships to the best and the brightest young scientists. Our web site has a complete listing of all details about LSRF (http://www.lsrf.org/). In the late 1980s the Division of Bioscience in the Office of Basic Energy Science, a granting agency of the Department of Energy, joined this partnership. Bioscience's mandate was to support non-medical microbiology and plant sciences. LSRF received a series of 5 year grants from DOE to award fellowships to our top applicants in these fields of research. We began to support DOE-Energy Bioscience post doctoral fellows in 1989. From 1989 through 2004 when DOE funding ended our partnership awarded 41 DOE-Energy Bioscience Fellows of the Life Sciences Research Foundation. Each of these was a three year fellowship. DOE-Energy Biosciences was well matched with LSRF. Our extensive peer review screened applicants in all areas of the life sciences. Most LSRF sponsors are interested in supporting fellows who work on diseases. At the time that we began our partnership with DOE we had no sponsors willing to support plant biology and non medical microbiology. For 15 years DOE played a major role in the training of the very best young scientists in these important fields of research simply through its support of LSRF post doctoral fellows. Young scientists interested in

  12. Development of a double-antibody sandwich ELISA for rapid detection of Bacillus Cereus in food

    Science.gov (United States)

    Zhu, Longjiao; He, Jing; Cao, Xiaohan; Huang, Kunlun; Luo, Yunbo; Xu, Wentao

    2016-01-01

    Bacillus cereus is increasingly recognized as one of the major causes of food poisoning in the industrialized world. In this paper, we describe a sensitive double-antibody sandwich enzyme-linked immunosorbent assay (ELISA) that was developed for rapid detection of B. cereus in food to minimize the risk of contamination. The polyclonal antibody (pAb) and monoclonal antibodies (mAbs) specific to B. cereus were generated from rabbit antiserum and mouse ascites, respectively, using the octanoic acid/saturated ammonium sulfate precipitation method and protein A-sepharose columns. IgG-isotype mAbs were specially developed to undergo a novel peripheral multiple sites immunization for rapid gain of hybridomas and a subtractive screen was used to eliminate cross reactivity with closely related species such as Bacillus thuringiensis, B. subtilis, B. licheniformis and B. perfringens. The linear detection range of the method was approximately 1 × 104–2.8 × 106 cells/mL with a detection limit (LOD) of 0.9 × 103 cells/mL. The assay was able to detect B. cereus when the samples were prepared in meat with various pathogens. The newly developed analytical method provides a rapid method to sensitively detect B. cereus in food specimens. PMID:26976753

  13. Energy Savings Potential and Research & Development Opportunities for Commercial Refrigeration

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2009-09-01

    This study documents the energy consumption of commercial refrigeration equipment (CRE) in the U.S. and evaluated the energy savings potential of various technologies and energy efficiency measures that could be applied to such equipment. The study provided an overview of CRE applications, assessed the energy-savings potential of CRE in the U.S., outline key barriers to adoption of energy-savings technologies, and recommended opportunities for advanced energy saving technology research. The study was modeled after an earlier 1996 report by Arthur D. Little, Inc., and updated key information, examined more equipment types, and outlined long-term research and development opportunities.

  14. Sustainable Development of Energy, Water and Environment Systems

    DEFF Research Database (Denmark)

    Markovska, Natasa; Duić, Neven; Mathiesen, Brian Vad

    2016-01-01

    The Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES) in 2015 returned to its hometown, Dubrovnik, and once again served as a significant venue for scientists and specialists in different areas of sustainable development from all over the world to initiate...... traditionally cover a range of energy issues - higher renewables penetration and various technologies and fuels assessments at energy supply side, as well as, energy efficiency in various sectors, buildings, district heating, electric vehicles and demand modelling at energy demand side. Also, a review paper...

  15. RENEWABLE ENERGY SOURCES IN POLAND - CONDITIONS AND POSSIBILITES OF DEVELOPMENT

    Energy Technology Data Exchange (ETDEWEB)

    Gawlik, L.; Mokrzycki, E.; Ney, R.

    2007-07-01

    The paper describes the state of the art in renewable energy sources development. The obligation resulting from the membership of Poland in the European Union as well as from other international agreements in the scope of renewable energy sources development are described. The production of electricity, heat and biofuels in Poland is given and the perspectives of development of particular renewable energy sources in Poland are discussed in the view of potential reserves and other constrains. The economic aspects of renewable energy technologies are shown. The environmental pros and cons of biomass energy development are described. Arguments for development of renewable energy sources use are stated: the decrease of dependence from primary energy sources, the decrease the emission of green house gases and the recovery of agricultural regions of the country. In conclusion it is stated that the significance of renewable energy sources in Polish conditions is constrained to local societies. Their development should be adjusted to conditions predominating in a given region and that wider consumption of renewable energy sources should develop in conformity with sustainable development, so it is necessary to reach agreement between local societies, institutions dealing with environment protection and representatives of power sector. (auth)

  16. Energy resources of the developing countries and some priority markets for the use of solar energy

    Science.gov (United States)

    Siddiqi, T. A.; Hein, G. F.

    1977-01-01

    Energy consumption for the developed and non-developed world is expressed as a function of GNP. An almost straight-line graph results when energy consumption statistics are treated in this manner. The richest countries consume the most energy, and the poorest countries the least. It therefore follows that greater energy production in the developing countries (leading to greater energy consumption) will contribute to their economic growth. Energy resources in the developing countries are compared, including: solid fossil fuels, crude oil, natural gas, oil shale, and uranium. Mention is also made of the potential of renewable energy resources, such as solar, wind, and hydroelectric power, in the underdeveloped world; and it is these resources which offer the greatest possibilities for economic improvement if the money is forthcoming, i.e., from the world bank, to fund the necessary technology.

  17. Evaluation of simple rapid HIV assays and development of national rapid HIV test algorithms in Dar es Salaam, Tanzania

    Directory of Open Access Journals (Sweden)

    Mbwana Judica

    2009-02-01

    Full Text Available Abstract Background Suitable algorithms based on a combination of two or more simple rapid HIV assays have been shown to have a diagnostic accuracy comparable to double enzyme-linked immunosorbent assay (ELISA or double ELISA with Western Blot strategies. The aims of this study were to evaluate the performance of five simple rapid HIV assays using whole blood samples from HIV-infected patients, pregnant women, voluntary counseling and testing attendees and blood donors, and to formulate an alternative confirmatory strategy based on rapid HIV testing algorithms suitable for use in Tanzania. Methods Five rapid HIV assays: Determine™ HIV-1/2 (Inverness Medical, SD Bioline HIV 1/2 3.0 (Standard Diagnostics Inc., First Response HIV Card 1–2.0 (PMC Medical India Pvt Ltd, HIV1/2 Stat-Pak Dipstick (Chembio Diagnostic System, Inc and Uni-Gold™ HIV-1/2 (Trinity Biotech were evaluated between June and September 2006 using 1433 whole blood samples from hospital patients, pregnant women, voluntary counseling and testing attendees and blood donors. All samples that were reactive on all or any of the five rapid assays and 10% of non-reactive samples were tested on a confirmatory Inno-Lia HIV I/II immunoblot assay (Immunogenetics. Results Three hundred and ninety samples were confirmed HIV-1 antibody positive, while 1043 were HIV negative. The sensitivity at initial testing of Determine, SD Bioline and Uni-Gold™ was 100% (95% CI; 99.1–100 while First Response and Stat-Pak had sensitivity of 99.5% (95% CI; 98.2–99.9 and 97.7% (95% CI; 95.7–98.9, respectively, which increased to 100% (95% CI; 99.1–100 on repeat testing. The initial specificity of the Uni-Gold™ assay was 100% (95% CI; 99.6–100 while specificities were 99.6% (95% CI; 99–99.9, 99.4% (95% CI; 98.8–99.7, 99.6% (95% CI; 99–99.9 and 99.8% (95% CI; 99.3–99.9 for Determine, SD Bioline, First Response and Stat-Pak assays, respectively. There was no any sample which was

  18. Energy Efficiency Policy Developments: September 2011-September 2012

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    The purpose of this report is to highlight energy efficiency policy action and planning in IEA member and key non-member countries over the period from September 2011 to September 2012. The report provides an overview of energy efficiency policy developments across the seven sectors covered by the IEA 25 Energy Efficiency Policy Recommendations (25 EEPR) – Cross-sectoral activities, Buildings, Appliances and Equipment, Lighting, Transport, Industry and Energy Providers.

  19. Development of Energy Balances for the State of California

    Energy Technology Data Exchange (ETDEWEB)

    Murtishaw, Scott; Price, Lynn; de la Rue du Can, Stephane; Masanet, Eric; Worrell, Ernst; Sahtaye, Jayant

    2005-12-01

    Analysts assessing energy policies and energy modelers forecasting future trends need to have access to reliable and concise energy statistics. Lawrence Berkeley National Laboratory evaluated several sources of California energy data, primarily from the California Energy Commission and the U.S. Energy Information Administration, to develop the California Energy Balance Database (CALEB). This database manages highly disaggregated data on energy supply, transformation, and end-use consumption for each type of energy commodity from 1990 to the most recent year available (generally 2001) in the form of an energy balance, following the methodology used by the International Energy Agency. This report presents the data used for CALEB and provides information on how the various data sources were reconciled. CALEB offers the possibility of displaying all energy flows in numerous ways (e.g.,physical units, Btus, petajoules, different levels of aggregation), facilitating comparisons among the different types of energy commodities and different end-use sectors. In addition to displaying energy data, CALEB can also be used to calculate state-level energy-related carbon dioxide emissions using the methodology of the Intergovernmental Panel on Climate Change.

  20. Rapid Atmospheric-Pressure-Plasma-Jet Processed Porous Materials for Energy Harvesting and Storage Devices

    Directory of Open Access Journals (Sweden)

    Jian-Zhang Chen

    2015-01-01

    Full Text Available Atmospheric pressure plasma jet (APPJ technology is a versatile technology that has been applied in many energy harvesting and storage devices. This feature article provides an overview of the advances in APPJ technology and its application to solar cells and batteries. The ultrafast APPJ sintering of nanoporous oxides and 3D reduced graphene oxide nanosheets with accompanying optical emission spectroscopy analyses are described in detail. The applications of these nanoporous materials to photoanodes and counter electrodes of dye-sensitized solar cells are described. An ultrashort treatment (1 min on graphite felt electrodes of flow batteries also significantly improves the energy efficiency.

  1. A Study on intensifying efficiency for international collaborative development of Advanced Nuclear Energy Technology

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, Dohee; Park, Seongwon; Chang, Moonhee

    2013-08-15

    All the countries of the world are promoting the use of atomic energy to provide against high oil prices, climatic changes, and energy security initiative. A domestic and foreign environment for nuclear energy is changing rapidly and 13 leading countries including Korea are trying to develop advanced technologies on Gen IV nuclear energy system through Gen IV International Forum (GIF). To enhance the effectiveness of the future nuclear energy system development plan, a strategic approach is necessary for GIF program and the connection process with the 4th Nuclear Energy Promotion Program and Nuclear Energy R and D Medium and Long Term 5 year Plan for 2012 ∼ 2016 needs to be prepared. This study was to analyze the global nuclear trends of 2012 and the status of GIF program which is international cooperation activities. Also we examined the domestic R and D status of future nuclear energy systems for developing core technology and commercialization of Gen-IV nuclear energy system. A successful performance of this project enables the effective national cooperation with GIF and promotes the public acceptance by suggesting the technical alternatives for the nuclear safety and the spent fuel management.

  2. Developing renewable energy in discontiguous Greenland

    DEFF Research Database (Denmark)

    Carruth, Susan

    2016-01-01

    Infrastructural Urbanism’s advocacy of creating synergies between technological, economical, and ecological processes holds great potential for guiding domestic energy planning in a transforming Greenland. However, the movement has largely been conceived in the context of regional paradigms very...... of the synergistic relationships it promotes. It aims to contribute an alternative reading of Infrastructural Urbanism, arguing that incorporating and reinterpreting existing material practices through a network of interventions in the urban realm is a necessary interpretation of the theory in Greenland, and one...

  3. Forecasting and evaluating patterns of energy development in southwestern Wyoming

    Science.gov (United States)

    Garman, Steven L.

    2015-01-01

    The effects of future oil and natural gas development in southwestern Wyoming on wildlife populations are topical to conservation of the sagebrush steppe ecosystem. To aid in understanding these potential effects, the U.S. Geological Survey developed an Energy Footprint simulation model that forecasts the amount and pattern of energy development under different assumptions of development rates and well-drilling methods. The simulated disturbance patterns produced by the footprint model are used to assess the potential effects on wildlife habitat and populations. A goal of this modeling effort is to use measures of energy production (number of simulated wells), well-pad and road-surface disturbance, and potential effects on wildlife to identify build-out designs that minimize the physical and ecological footprint of energy development for different levels of energy production and development costs.

  4. Nuclear-Renewable Hybrid Energy Systems: 2016 Technology Development Program Plan

    Energy Technology Data Exchange (ETDEWEB)

    Bragg-Sitton, Shannon M. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boardman, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Rabiti, Cristian [Idaho National Lab. (INL), Idaho Falls, ID (United States); Suk Kim, Jong [Idaho National Lab. (INL), Idaho Falls, ID (United States); McKellar, Michael [Idaho National Lab. (INL), Idaho Falls, ID (United States); Sabharwall, Piyush [Idaho National Lab. (INL), Idaho Falls, ID (United States); Chen, Jun [Idaho National Lab. (INL), Idaho Falls, ID (United States); Cetiner, M. Sacit [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Harrison, T. Jay [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Qualls, A. Lou [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-03-01

    The United States is in the midst of an energy revolution, spurred by advancement of technology to produce unprecedented supplies of oil and natural gas. Simultaneously, there is an increasing concern for climate change attributed to greenhouse gas (GHG) emissions that, in large part, result from burning fossil fuels. An international consensus has concluded that the U.S. and other developed nations have an imperative to reduce GHG emissions to address these climate change concerns. The global desire to reduce GHG emissions has led to the development and deployment of clean energy resources and technologies, particularly renewable energy technologies, at a rapid rate. At the same time, each of the major energy sectors—the electric grid, industrial manufacturing, transportation, and the residential/commercial consumers— is increasingly becoming linked through information and communications technologies, advanced modeling and simulation, and controls. Coordination of clean energy generation technologies through integrated hybrid energy systems, as defined below, has the potential to further revolutionize energy services at the system level by coordinating the exchange of energy currency among the energy sectors in a manner that optimizes financial efficiency (including capital investments), maximizes thermodynamic efficiency (through best use of exergy, which is the potential to use the available energy in producing energy services), reduces environmental impacts when clean energy inputs are maximized, and provides resources for grid management. Rapid buildout of renewable technologies has been largely driven by local, state, and federal policies, such as renewable portfolio standards and production tax credits that incentivize investment in these generation sources. A foundational assumption within this program plan is that renewable technologies will continue to be major contributors to the future U.S. energy infrastructure. While increased use of clean

  5. Rapid and facile ratiometric detection of an anthrax biomarker by regulating energy transfer process in bio-metal-organic framework.

    Science.gov (United States)

    Zhang, Yihe; Li, Bin; Ma, Heping; Zhang, Liming; Zheng, Youxuan

    2016-11-15

    A ratiometric fluorescent sensor based on luminescent bio-metal-organic framework was prepared by exchanging both Tb(3+) and Eu(3+) cations into anionic bio-MOF-1. Due to a highly efficient energy transfer from Tb(3+) to Eu(3+) (>89%), emission color of Tb/Eu@bio-MOF-1 was orange-red even though Tb(3+) was the dominant content in this Tb/Eu co-doping material. More interestingly, this energy transfer process could be modulated by dipicolinic acid (DPA), an unique biomarker for bacillus spores. With DPA addition, corresponding DPA-to-Tb(3+) energy transfer was gradually enhanced while the energy transfer from Tb(3+) to Eu(3+) was significantly weakened. By regulating the energy transfer process in Tb/Eu@bio-MOF-1, visual colorimetric sensing of DPA in porous MOF was realized for the first time. Detection limit of Tb/Eu@bio-MOF-1 for DPA was 34nM, which was much lower than an infectious dosage of Bacillus anthracis spores (60μM) for human being. Besides, Tb/Eu@bio-MOF-1 showed a remarkable selectivity over other aromatic ligands and amino acids. More importantly, this porous ratiometric sensor worked equally well in human serum. These particularly attractive features of Tb/Eu@bio-MOF-1 made the direct, rapid and naked-eye detection of DPA for practical application possible. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. Do we Need a Sociology of Energy Development?

    Science.gov (United States)

    Papatheodorou, Photini; Spathopoulos, Fivos

    2016-04-01

    The presentation discusses the need of developing a new area of scientific study, namely the "Sociology of Energy Development". It presents our knowledge gaps, regarding the reaction of societies towards energy projects. The presentation proposes that the first steps will be to study the "ethnography" of the energy companies and acquire a clear understanding of their specific cultures. In particular, the presentation argues for a need to raise meaningful questions about the values and attitudes of energy companies in areas such as environmental awareness; gender; cultural differences and other issues of conflict. It will also propose that a new conceptual framework is developed for the specific analysis of the relationship between society and energy companies, in the fields of public perception and trust. Finally, the presentation will conclude with an exploration of key principles, which may guide the development of new ethical practices in the field of energy.

  7. Principle design of a protontherapy, rapid-cycling, variable energy spiral FFAG

    CERN Document Server

    Antoin, S; Beeckman, W; Collot, J; Conjat, M; Forest, F; Fourrier, J; Froidefond, E; Lancelot, J L; Mandrillon, J; Mandrillon, P; Méot, F; Mori, Y; Neuvéglise, D; Ohmori, C; Pasternak, J; Planche, f, T

    2009-01-01

    The FFAG method is nowadays seen as a potential candidate for the acceleration of protons and light ions for hadrontherapy. This has motivated the design of a principle protontherapy installation, in the frame of the RACCAM project. This article presents the design study, a medical spiral scaling FFAG assembly, capable of producing variable energy proton beams, with potentially high repetition and dose delivery rates.

  8. Development of a highly sensitive lateral immunochromatographic assay for rapid detection of Vibrio parahaemolyticus.

    Science.gov (United States)

    Liu, Xinfeng; Guan, Yuyao; Cheng, Shiliang; Huang, Yidan; Yan, Qin; Zhang, Jun; Huang, Guanjun; Zheng, Jian; Liu, Tianqiang

    2016-12-01

    Vibrio parahaemolyticus is widely present in brackish water all over the world, causing infections in certain aquatic animals. It is also a foodborne pathogen that causes diarrhea in humans. The aim of this study is to develop an immunochromatographic lateral flow assay (LFA) for rapid detection of V. parahaemolyticus in both aquatic products and human feces of diarrheal patients. Two monoclonal antibody (MAb) pairs, GA1a-IC9 and IC9-KB4c, were developed and proven to be highly specific and sensitive to V. parahaemolyticus. Based on the two MAb pairs, two types of LFA strips were prepared. Their testing limits for V. parahaemolyticus culture were both 1.2×103CFU/ml. The diagnostic sensitivities and specificities were both 100% for the 32 tested microbial species, including 6 Vibrio species. Subsequently, the LFA strips were used to test Whiteleg shrimps and human feces. The type II strip showed a higher diagnostic sensitivity. Its sensitivity and specificity for hepatopancreas and fecal samples from 13 Whiteleg shrimps and fecal samples from 146 human diarrheal patients were all 100%. In conclusion, our homemade type II LFA is a very promising testing device for rapid and convenient detection of V. parahaemolyticus infection not only in aquatic animals, but also in human diarrheal patients. This sensitive immunochromtographic LFA allows rapid detection of V. parahaemolyticus without requirement of culture enrichment. Copyright © 2016. Published by Elsevier B.V.

  9. MHD--Developing New Technology to Meet the Energy Crisis

    Science.gov (United States)

    Fitch, Sandra S.

    1978-01-01

    Magnetohydrodynamics is a technology that could utilize the nation's most abundant fossil fuel and produce electrical energy more efficiently and cleanly than present-day turbines. A national research and development program is ongoing in Butte, Montana at the Montana Energy and MHD Research and Development Institute (MERDI). (Author/RK)

  10. Efficient integration of renewable energy into future energy systems. Development of European energy infrastructures in the period 2030 to 2050

    Energy Technology Data Exchange (ETDEWEB)

    Funk, Carolin; Uhlig, Jeanette; Zoch, Immo (eds.)

    2011-10-15

    In consideration of strategic climate mitigation, energy security and economic competitiveness goals, the EU passed the Directive 2009/28/EC, including a binding target of 20 per cent renewable energy consumption in the EU by 2020. This target is comprehensive and includes energy generation, transport, heating and cooling sectors. In 2008, renewable energy consumption in the EU was about 10 per cent. So meeting the 20 per cent renewable energy objective will require massive changes in energy production, transmission and consumption in the EU. Furthermore, it is obvious that the development of the energy system will not stop in 2020, but that it will continue towards 2050 and beyond. Over the past century, the European electricity system was developed in line with a national utilit y perspective which heavily emphasised large, centralised conventional power production. Investment decisions for new energy infrastructure and technology were typically made at the national level. In the future, much more energy production will be based on local or regional renewable energy sources (RES). Many consumers may also become energy producers feeding into the infrastructures. Transnational energy transfers will gain in importance. These changes will require very different electricity and gas infrastructures and decision-making processes from today. Lack of infrastructure capacity is already a barrier for the further deployment of RES-based energy production in some regions in Europe. (orig.)

  11. Rapidly developing multimorbidity and disability in older adults: does social background matter?

    Science.gov (United States)

    Calderón-Larrañaga, Amaia; Santoni, Giola; Wang, Hui Xin; Welmer, Anna-Karin; Rizzuto, Debora; Vetrano, Davide L; Marengoni, Alessandra; Fratiglioni, Laura

    2018-02-07

    Multimorbidity is among the most disabling geriatric conditions. In this study we explored whether a rapid development of multimorbidity potentiates its impact on the functional independence of older adults, and whether different sociodemographic factors play a role beyond the rate of chronic disease accumulation. A random sample of persons aged ≥60 years (n = 2387) from the Swedish National study on Aging and Care in Kungsholmen (SNAC-K) was followed over 6 years. The speed of multimorbidity development was estimated as the rate of chronic disease accumulation (linear mixed models) and further dichotomized into the upper versus the three lower rate quartiles. Binomial negative mixed models were used to analyse the association between speed of multimorbidity development and disability (impaired basic and instrumental activities of daily living), expressed as the incidence rate ratio (IRR). The effect of sociodemographic factors, including sex, education, occupation and social network, was investigated. The risk of new activity impairment was higher among participants who developed multimorbidity faster (IRR 2.4, 95% CI 1.9-3.1) compared with those who accumulated diseases more slowly over time, even after considering the baseline number of chronic conditions. Only female sex (IRR for women vs. men 1.6, 95% CI 1.2-2.0) and social network (IRR for poor vs. rich social network 1.7, 95% CI 1.3-2.2) showed an effect on disability beyond the rate of chronic disease accumulation. Rapidly developing multimorbidity is a negative prognostic factor for disability. However, sociodemographic factors such as sex and social network may determine older adults' reserves of functional ability, helping them to live independently despite rapid accumulation of chronic conditions. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  12. Development of process equipment to separate nonthermal and thermal effects of RF energy on microorganisms.

    Science.gov (United States)

    Brunkhorst, C; Ciotti, D; Fredd, E; Wilson, J R; Geveke, D J; Kozempel, M

    2000-01-01

    We developed a modified radio frequency (RF) dielectric heater, as a component of a continuous process, for isolating thermal and nonthermal effects of RF energy on microorganisms in liquid foods. The concept combines instantaneous input of RF energy to the food system with rapid removal of thermal energy. We used a double tube heat exchanger as an integral part of the RF heater. The outer tube was Teflon. The inner tube was stainless steel which was grounded in the RF circuit. Product flowed through the annular region between the two concentric tubes. Cooling water flowed through the grounded stainless steel tube. The RF energy was absorbed by the process fluid in the annular region. The cooling water flowing in the inner tube removed the thermal energy from the process fluid controlling the temperature.

  13. Renewable Energy Development in Indian Country: A Handbook for Tribes

    Energy Technology Data Exchange (ETDEWEB)

    MacCourt, D. C.

    2010-06-01

    This handbook is designed to be an accessible reference for those who are new to tribal energy project development or seek a refresher on key development issues as they navigate the project development process. It builds upon the wealth of feedback and experiences shared by tribal and other participants in the National Renewable Energy Laboratory's tribal energy training sessions to provide tribal leaders, tribal economic and energy enterprises, and those supporting them with a general overview of the renewable energy project development process as well as detailed guidance on the following: how to structure a renewable energy project transaction to protect tribal interests, with an emphasis on joint project development efforts undertaken with nontribal parties; key energy development agreements, including power sale agreements, transmission and interconnection agreements, and land leases; and ways tribes can finance renewable energy projects, including the sources of funding or financing that may be available, the types of investors that may be available, and federal tax incentives for renewable energy projects.

  14. Brief history of the Office of Energy Research and Development: Federal Energy Office/Federal Energy Administration

    Energy Technology Data Exchange (ETDEWEB)

    Hibbard, W.R. Jr.

    1974-11-15

    A number of Important Issues in energy research and development which warrant special attention by the Energy Research and Development Office (ERDO) are identified and examined. Six matters considered to be of sufficient weight to be labeled Important Issues are: nuclear reactor siting policy: nuclear energy centers; the development of solar electric power; exploitation of western oil shale; improvements in mining technology for coal; assuring uranium fuel supplies; and automotive energy systems. The environmental issue is treated separately. Actions that ERDO can take to help resolve the issues are discussed.

  15. Renewable Energy Contract Development Best Practices

    Science.gov (United States)

    This page provides information on how available resources can help organizations effectively navigate the solar contract development process with the goal of RFP and contract transparency, completeness, and accountability of all involved parties.

  16. Geothermal Energy Research Development and Demonstration Program

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    The Federal program's goal, strategy, plans, and achievements are summarized. In addition, geothermal development by state and local governments and, where available, by the private sector is described. (MHR)

  17. The potential influence of energy efficiency and economic efficiency on developing country carbon dioxide emissions

    Energy Technology Data Exchange (ETDEWEB)

    Pearson, P.J.G.; Fouquet, R. [Imperial College of Science, Technology and Medicine, London (United Kingdom). Centre for Environmental Technology

    1996-12-31

    Discusses the hypothesis that, despite the opportunities for and value to the developing world of greater energy efficiency, in a situation where tight restrictions on global CO{sub 2} emissions were necessary, efficiency alone could make only a limited contribution to restraining the growth of emissions in developing countries. This is because of the projected rapid energy growth rates in most developing countries, especially in the industrial sector and from fossil-fuelled electricity and transport. The need for research and development work on energy efficiency, to address global CO{sub 2} emissions, particularly fuel switching, and policy options for the control of CO{sub 2}, are also examined. 36 refs., 4 tabs.

  18. Problems and forecast of the development of the Russian fuel and energy complex: the factorial approach

    Directory of Open Access Journals (Sweden)

    Irina A. Toimentseva

    2017-09-01

    Full Text Available Existing forecasts of Russian energy sector development have a number of general provisions and differ in approaches to their construction. The most realistic forecast is made within the framework of the Energy Strategy of Russia for the period up to 2035. However, the dynamism and high uncertainty of economic processes, international relations, domestic policy and the rapid growth of scientific and technical progress need a systematic correction of any forecast. The purpose of the article is to develop theoretical provisions and practical recommendations for making a forecast for the development of the Russian fuel and energy complex based on the application of the factor approach. The forecasting results are used in the development of management decisions, therefore, the authors of the article take into account the influence of various factors while making the forecast, but they (factors are all quantitatively commensurable. To make a reliable forecast, the internal environment of the research object is studied in detail, organizational and economic problems in the development of the Russian fuel and energy complex are revealed, and methods for their elimination are suggested. The external environment is also analyzed and trends in the development of world energy markets are revealed. To forecast the state of the fuel and energy complex, an integral indicator is chosen reflecting the level of its technical and economic development.

  19. An approach to enhance the conservation-compatibility of solar energy development.

    Directory of Open Access Journals (Sweden)

    D Richard Cameron

    Full Text Available The rapid pace of climate change poses a major threat to biodiversity. Utility-scale renewable energy development (>1 MW capacity is a key strategy to reduce greenhouse gas emissions, but development of those facilities also can have adverse effects on biodiversity. Here, we examine the synergy between renewable energy generation goals and those for biodiversity conservation in the 13 M ha Mojave Desert of the southwestern USA. We integrated spatial data on biodiversity conservation value, solar energy potential, and land surface slope angle (a key determinant of development feasibility and found there to be sufficient area to meet renewable energy goals without developing on lands of relatively high conservation value. Indeed, we found nearly 200,000 ha of lower conservation value land below the most restrictive slope angle (<1%; that area could meet the state of California's current 33% renewable energy goal 1.8 times over. We found over 740,000 ha below the highest slope angle (<5%--an area that can meet California's renewable energy goal seven times over. Our analysis also suggests that the supply of high quality habitat on private land may be insufficient to mitigate impacts from future solar projects, so enhancing public land management may need to be considered among the options to offset such impacts. Using the approach presented here, planners could reduce development impacts on areas of higher conservation value, and so reduce trade-offs between converting to a green energy economy and conserving biodiversity.

  20. Road map for renewable energy research and development in Egypt

    Directory of Open Access Journals (Sweden)

    Adel K. Khalil

    2010-01-01

    Full Text Available Egypt possesses excellent potential for renewable energy (RE including solar, wind and biomass energy. Renewable energy technologies (RETs and systems have different needs for support in terms of research and development, demonstration and market development. For this purpose, the Energy Research Center (ERC at Cairo University has carried out a study with the ultimate goal of formulating a national development strategy and action plan for the local manufacture of renewable energy systems (RESs and components. The present study positions the different RETs and RESs and identifies the research and development needs for each technology. The study also suggests how to establish a competitive market for RET. For this purpose it builds and analyses a set of likely scenarios, and proposes a practical development strategy and a detailed action plan for achieving it.

  1. Development strategy of alternative energy responding to Climate Change Concerns

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jin Oh; Moon, Young Seok; Cho, Gyeong Lyeob [Korea Energy Economics Institute, Euiwang (Korea)

    1999-09-01

    Since UNICEF (UN Framework Convention on Climate Change) has adopted in Brazil, June 1992, there have been four times of COPS taken place to discuss more detailed and realistic international action plan for regulating greenhouse gas emission and reduction scheme. Due to this, the direction of future energy policy has been changed in a large scale. The reduction of greenhouse gas is the most urgent issue at present rather than the stable supply of energy in the past. It is natural that improving energy efficiency and developing clean alternative energy have been a major issue. In case of the advanced countries, the energy policy has been changed to the harmonization of so called 3E, environmental conservation, economic growth, and energy security from the economic growth oriented energy policy and has tried to enhance industrial competition through developing new technology and alternative energy for improving energy efficiency. Alternative energy, called as new renewable energy, does not have to concern about its exhaustion and is the only clean future energy source. Therefore this is an important project that should be implemented with a long-term vision and interest by the people as well as the government. (author). 8 refs., 4 figs., 15 tabs.

  2. Development of technologies for utilizing geothermal energy

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    In verifying the effectiveness of the deep geothermal resource exploration technology, development is being carried out on a fracture-type reservoir exploration method. The seismic exploration method investigates detailed structures of underground fracture systems by using seismic waves generated on the ground surface. Verification experiments for fiscal 1994 were carried out by selecting the Kakkonda area in which small fracture networks form reservoir beds. Geothermal resources in deep sections (deeper than 2000 m with temperatures higher than 350{degree}C) are promising in terms of amount of the resources, but anticipated with difficulty in exploration and impediments in drilling. To avoid these risks, studies are being progressed on the availability of resources in deep sections, their utilization possibility, and technologies of effective exploration and drilling. This paper summarizes the results of deep resource investigations during fiscal 1994. It also describes such technological development as hot water utilizing power generation. Development is performed on a binary cycle power generation plant which pumps and utilizes hot water of 150 to 200{degree}C by using a downhole pump. The paper also reports development on element technologies for hot rock power generation systems. It also dwells on development of safe and effective drilling and production technologies for deep geothermal resources.

  3. Rapid culture-based diagnosis of pulmonary tuberculosis in developed and developing countries

    Directory of Open Access Journals (Sweden)

    Michel eDRANCOURT

    2015-11-01

    Full Text Available Culturing Mycobacterium tuberculosis remains the gold standard for the laboratory diagnosis of pulmonary tuberculosis, with 9 million new cases and 1.5 million deaths mainly in developing countries. Reviewing data reported over 20 years yields a state-of-the-art procedure for the routine culture of M. tuberculosis in both developed and developing countries. Useful specimens include sputum, induced sputum and stools collected in quaternary ammonium preservative-containing sterile cans. The usefulness of other non-invasive specimens remains to be evaluated. Specimens can be collected in a diagnosis kit also containing sampling materials, instructions, laboratory requests and informed consent. Automated direct LED fluorescence microscopy after auramine staining precedes inoculation of an egg-lecithin-containing culture solid medium under microaerophilic atmosphere, inverted microscope reading or scanning video-imaging detection of colonies and colonies identification by recent molecular methods. This procedure should result in a diagnosis of pulmonary tuberculosis as fast as 5 days. It may be implemented in both developed and developing countries with automated steps replaceable by manual steps depending on local resources.

  4. Global Nuclear Energy Partnership Technology Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    David J. Hill

    2007-07-01

    This plan describes the GNEP Technology Demonstration Program (GNEP-TDP). It has been prepared to guide the development of integrated plans and budgets for realizing the domestic portion of the GNEP vision as well as providing the basis for developing international cooperation. Beginning with the GNEP overall goals, it describes the basic technical objectives for each element of the program, summarizes the technology status and identifies the areas of greatest technical risk. On this basis a proposed technology demonstration program is described that can deliver the required information for a Secretarial decision in the summer of 2008 and support construction of facilities.

  5. SOAR telescope control system: a rapid prototype and development in LabVIEW

    Science.gov (United States)

    Ashe, Michael C.; Schumacher, German

    2000-06-01

    A Rapid Prototype and full development plan of the SOAR TCS is reviewed to show advances in: (1) Prototyping speed, which makes implementation and test of features faster than specification under older methods. This allows the development environment and prototype modules to become partners with and part of the specification documents. (2) Real-Time performance and reliability through use of RT Linux. (3) Visually Rich GUI development that allows an emphasis on `seeing' versus `reading'. (4) Long-Term DataLogging and Internet subscription service of all desired variables with instant recall of historical trend data. (5) A `plug-in' software architecture which enables rapid reconfiguration and reuse of the system and/or plug-ins utilizing LabVIEW graphical modules, a scripting language engine (in LabVIEW) and encapsulation of interfaces in `instrument-driver' style `plug-in' modules. (6) A platform- independent development environment and distributed architecture allowing secure internet observation and control via every major OS and hardware platform.

  6. Pascua Yaqui Tribe Renewable Energy Development and Deployment Feasibility Study

    Energy Technology Data Exchange (ETDEWEB)

    Arvayo, Maria

    2014-05-30

    In 2012, PYT was awarded a grant from the Department of Energy Tribal Energy Program to conduct a Renewable Energy Development and Deployment Feasibility Study that would define the technical and economic viability of renewable energy on tribal lands. Red Mountain Energy Partners (RMEP) was hired by PYT to complete the study. Through this study, Red Mountain concluded that there are viable opportunities for solar at Tortuga Ranch, the Casino del Sol and a third site near the Justice Center on Camino de Oeste.

  7. Energy policies and politics for sustainable world-system development

    DEFF Research Database (Denmark)

    Czeskleba-Dupont, Rolf

    environmental impacts of renewable energy sources. Normatively, (a) parts of the 1987 Brundtland report and (b) Danish experiences with regulated markets and innovations (Hvelplund 1995) are discussed and supplemented by (c) a critique of EU energy policies, especially the continued support of nuclear industry...... by Euratom (Woodman 2003). A political approach to preconditions for sustainable energy policies is finally developed from (a) Barry Commoner's critique of 1979 of president Carter's energy plan followed by the impasse of the Reagan era with the US government's retreat from federal energy and environmental...

  8. Renewable Energy Development In Africa - Challenges, Opportunities, Way Forward

    Energy Technology Data Exchange (ETDEWEB)

    Ram, Babu

    2010-09-15

    The unexploited potential of renewable energy in Sub-Saharan Africa can be traced back to national energy policies, which concentrate on the conventional electricity sector while the support for renewable resources remains on the fringes. This Paper reviews public policies and funding instruments to exploit renewable energy resources for increasing electricity and energy access rate in Africa. Estimates indicate that 8,500 MW renewable energy projects could be developed in short-term. Way forward, conclusions and recommendations are presented in this regard in the paper.

  9. sustainable development of national energy resources

    African Journals Online (AJOL)

    RAYAN_

    Committee on International Law on Sustainable Development in 2003 and submitted its fifth and final report at .... and gas are shared natural resources, with a recent attempt by the ILC Special Rapporteur on Shared ..... the principles, and widely varying consequences of their application depending on the specific context.

  10. Developing a framework for evaluation of renewable energy in developing countries

    OpenAIRE

    Kiarsi, Sepideh

    2011-01-01

    Abstract In this dissertation, I develop a framework for evaluation of renewable energy projects in developing countries. There is a global common sense that addressing the increasing energy demands of both developed and developing countries with the conventional exhaustible fossil fuels will be difficult in the long-term. In developing countries, in addition to providing energy for the industrial development, providing services to meet basic human needs such as heat and lig...

  11. A first report on making Saskatchewan a Canadian leader in energy conservation and renewable energy development

    Energy Technology Data Exchange (ETDEWEB)

    Prebble, P. [Government of Saskatchewan, Regina, SK (Canada)

    2006-12-15

    This report proposed policy changes for energy conservation and renewable energy in Saskatchewan related to the electricity and buildings sectors. Recommendations were presented for 4 core areas, notably (1) transition to renewable energy in the electrical sector, (2) incentives to promote conservation and renewable energy, (3) the continuation of conservation and renewable energy programs within the buildings sector, and (4) the creation of new policies to encourage renewable energy use and energy conservation. The report recommended legislation for a renewable energy and conservation portfolio standard for electricity production, as well as increased investment in demand side management programs. The use of large-scale wind power in future electrical generation upgrades was also recommended, as well as net metering and financial incentives for small-scale producers of electricity. Tax credit schemes were presented, as well as various energy efficiency grant programs for homeowners, and the implementation of new energy efficiency building codes, and solar energy legislation. Policy measures to promote conservation and renewable energy development included the expansion of the office of energy conservation, and the establishment of a fund to ensure a stable public funding base for conservation and renewable energy initiatives. refs.

  12. Proposal of a New Method for Measuring Förster Resonance Energy Transfer (FRET Rapidly, Quantitatively and Non-Destructively

    Directory of Open Access Journals (Sweden)

    Paul Johannes Helm

    2012-09-01

    Full Text Available The process of radiationless energy transfer from a chromophore in an excited electronic state (the “donor” to another chromophore (an “acceptor”, in which the energy released by the donor effects an electronic transition, is known as “Förster Resonance Energy Transfer” (FRET. The rate of energy transfer is dependent on the sixth power of the distance between donor and acceptor. Determining FRET efficiencies is tantamount to measuring distances between molecules. A new method is proposed for determining FRET efficiencies rapidly, quantitatively, and non-destructively on ensembles containing donor acceptor pairs: at wavelengths suitable for mutually exclusive excitations of donors and acceptors, two laser beams are intensity-modulated in rectangular patterns at duty cycle ½ and frequencies ƒ1 and ƒ2 by electro-optic modulators. In an ensemble exposed to these laser beams, the donor excitation is modulated at ƒ1, and the acceptor excitation, and therefore the degree of saturation of the excited electronic state of the acceptors, is modulated at ƒ2. Since the ensemble contains donor acceptor pairs engaged in FRET, the released donor fluorescence is modulated not only at ƒ1 but also at the beat frequency Δƒ: = |ƒ1 − ƒ2|. The depth of the latter modulation, detectable via a lock-in amplifier, quantitatively indicates the FRET efficiency.

  13. Sustainable Development of Sewage Sludge-to-Energy in China

    DEFF Research Database (Denmark)

    Ren, Jingzheng; Liang, Hanwei; Dong, Liang

    2017-01-01

    proposed. After the grey DEMATEL analysis, a grey Multi-Criteria Decision Making (MCDM) framework which allows multiple decision-makers/stakeholders to use linguistic terms to participate in the decision-making for prioritizing the alternative technologies for sludge-to-energy was developed......In order to promote the sustainable development of sludge-to-energy industry and help the decision-makers/stakeholders to select the most sustainable technology for achieving the sludge-to-energy target, this study aims at using grey Decision Making Trial and Evaluation Laboratory (DEMATEL...... is feasible for group decision-making and sustainability assessment of the alternative technologies for sludge-to-energy....

  14. Sustainable Energy in Remote Indonesian Grids. Accelerating Project Development

    Energy Technology Data Exchange (ETDEWEB)

    Hirsch, Brian [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Burman, Kari [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Davidson, Carolyn [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Elchinger, Michael [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Hardison, R. [Winrock International, Little Rock, AR (United States); Karsiwulan, D. [Winrock International, Little Rock, AR (United States); Castermans, B. [Winrock International, Little Rock, AR (United States)

    2015-06-30

    Sustainable Energy for Remote Indonesian Grids (SERIG) is a U.S. Department of Energy (DOE) funded initiative to support Indonesia’s efforts to develop clean energy and increase access to electricity in remote locations throughout the country. With DOE support, the SERIG implementation team consists of the National Renewable Energy Laboratory (NREL) and Winrock International’s Jakarta, Indonesia office. Through technical assistance that includes techno-economic feasibility evaluation for selected projects, government-to-government coordination, infrastructure assessment, stakeholder outreach, and policy analysis, SERIG seeks to provide opportunities for individual project development and a collective framework for national replication office.

  15. Development of the Wave Energy Converter -Wave Dragon

    DEFF Research Database (Denmark)

    Kofoed, Jens Peter; Frigaard, Peter; Sørensen, Hans Christian

    2000-01-01

    2Over the years wave energy has gradually been brought into focus, as it has become clear that the fossil energy resources are limited, and cause large environmental problems, e.g. CO2 pollution. On this background a number of different wave energy converters have been proposed. In Denmark...... the government have decided to appropriate 20 mill. DKK (approx. 2,7 mill. EUR) to the development of wave energy devices over two years, 1998-1999, and the European Community (EC) also supports the development through the JOULECRAFT program....

  16. Influence of selected Federal statutes on energy development

    Energy Technology Data Exchange (ETDEWEB)

    Curry, M.; Greene, M.

    1976-06-01

    This report outlines and discusses the major Federal statutes which can act as constraints and incentives to the various types of energy resource developments and their resulting impacts. While state and local legislation and other political and institutional factors may create more immediate constraints and incentives regarding the location of energy developments, Federal legislation can supersede state and local powers and often sets a precedent for similar state legislation. This study examines institutional barriers and incentives to energy development and investigate potential management strategies for energy impacts, deals with the first layer of constraints--Federal legislation. For this discussion, constraints and incentives are the laws and resulting policies and guidelines that limit and/or encourage certain development policies and actions. These laws set parameters along several dimensions within which all development actions must occur. The dimensions, which are the sectors of the Regional Assessment Program are (1) air quality, (2) water quality, (3) bioproductivity, (4) land use, (5) economics/energy, and (6) community development (social/demographic/psychological issues). This report has been organized along the six dimensions. The characteristics of the Pacific Northwest region and of the energy development/production process are described. A general overview of the Federal legislative constraints and incentives, including some discussion of their content and the implications of each piece of legislation for energy resource development is provided. (Appendices A through F contain brief abstracts of each piece of legislation.) (From overview)

  17. A rapid change in the low energy cut-off of Scorpius X-1

    Science.gov (United States)

    Moore, W. E.; Cordova, F.; Garmire, G. P.

    1974-01-01

    Sco X-1 was observed on June 10, 1972 near 04 hr 33 min U.T. simultaneously in the optical (B) the soft X-ray (0.1 to 2.4 keV) and the X-ray (1.5 to 20 keV) bands of the spectrum. It is believed that a change of short duration in the absorbing medium associated with Sco X-1 was observed. The medium attenuating the low energy X-ray flux from Sco X-1 has apparently changed by more than 40% on a time scale of less than 45 sec.

  18. Grameen Bank`s experience with energy related microenterprise development

    Energy Technology Data Exchange (ETDEWEB)

    Barua, D.C.

    1997-12-01

    Increased population and growth of industry have resulted in greater demand for energy worldwide. Most of this energy is derived from fossil fuel (coal, gas, oil and nuclear) which will soon be depleted. In this context the need for developing renewable sources of energy has taken on a greater sense of importance and urgency. Over the years significant technological advances have been made in the area of renewable energies especially in the field of solar photovoltaics (PV), wind energy and bio-gas technology. In addition, for remote rural areas where there exists no infrastructure for conventional energy supply, these forms of decentralized alternative energy systems will be far more adaptable and well suited. Grameen Shakti (Energy) is an addition to the family of companies of Grameen Bank, to promote and supply renewable energy sources to rural households. GS, a not-for-profit company, expects not only to supply renewable energy services, but also to create employment and income generation opportunities in rural Bangladesh. GS will focus on supply, marketing, sales, testing and development of renewable energy systems of solar pv, biogas, wind turbines and windpumps.

  19. Development of Rapid Isothermal Amplification Assays for Detection of Phytophthora spp. in Plant Tissue.

    Science.gov (United States)

    Miles, Timothy D; Martin, Frank N; Coffey, Michael D

    2015-02-01

    Several isothermal amplification techniques recently have been developed that are tolerant of inhibitors present in many plant extracts, which can reduce the need for obtaining purified DNA for running diagnostic assays. One such commercially available technique that has similarities with real-time polymerase chain reaction (PCR) for designing primers and a labeled probe is recombinase polymerase amplification (RPA). This technology was used to develop two simple and rapid approaches for detection of Phytophthora spp.: one genus-specific assay multiplexed with a plant internal control and the other species-specific assays for Phytophthora ramorum and P. kernoviae. All assays were tested for sensitivity (ranging from 3 ng to 1 fg of DNA) and specificity using DNA extracted from more than 136 Phytophthora taxa, 21 Pythium spp., 1 Phytopythium sp., and a wide range of plant species. The lower limit of linear detection using purified DNA was 200 to 300 fg of DNA in all pathogen RPA assays. Six different extraction buffers were tested for use during plant tissue maceration and the assays were validated in the field by collecting 222 symptomatic plant samples from over 50 different hosts. Only 56 samples were culture positive for Phytophthora spp. whereas 91 were positive using the Phytophthora genus-specific RPA test and a TaqMan real-time PCR assay. A technique for the generation of sequencing templates from positive RPA amplifications to confirm species identification was also developed. These RPA assays have added benefits over traditional technologies because they are rapid (results can be obtained in as little as 15 min), do not require DNA extraction or extensive training to complete, use less expensive portable equipment than PCR-based assays, and are significantly more specific than current immunologically based methods. This should provide a rapid, field-deployable capability for pathogen detection that will facilitate point-of-sample collection processing

  20. Identification of pollutant sources in a rapidly developing urban river catchment in China

    Science.gov (United States)

    Huang, Jingshui; Yin, Hailong; Jomma, Seifeddine; Rode, Michael; Zhou, Qi

    2016-04-01

    Rapid economic development and urbanization worldwide cause serious ecological and environmental problems. A typical region that is in transition and requires systemic research for effective intervention is the rapidly developing city of Hefei in central P. R. China. In order to investigate the sources of pollutants over a one-year period in Nanfei River catchment that drains the city of Hefei, discharges were measured and water samples were taken and measured along the 14km river section at 10 sites for 4 times from 2013 to 2014. Overflow concentrations of combined sewer and separate storm drains were also measured by selecting 15 rain events in 4 typical drainage systems. Loads and budgets of water and different pollutant sources i.e., wastewater treatment plant (WWTP) effluent, urban drainage overflow, unknown wastewater were calculated. The water balance demonstrated that >70% of the discharge originated from WWTP effluent. Lack of clean upstream inflow thereby is threatening ecological safety and water quality. Furthermore, mass fluxes calculations revealed that >40% of the COD (Chemical Oxygen Demand) loads were from urban drainage overflow because of a large amount of discharge of untreated wastewater in pumping stations during rain events. WWTP effluent was the predominant source of the total nitrogen loads (>60%) and ammonia loads (>45%). However, the total phosphorous loads from three different sources are similar (˜1/3). Thus, our research provided a basis for appropriate and prior mitigation strategies (state-of-art of WWTP upgrade, sewer systems modification, storm water regulation and storage capacity improvement, etc.) for different precedence-controlled pollutants with the limited infrastructure investments in these rapidly developing urban regions.

  1. DEVELOPMENT OF RAPID TECHNIQUE FOR DETERMINATION OF THE TOTAL MINERALIZATION OF NATURAL WATERS

    Directory of Open Access Journals (Sweden)

    T. A. Kuchmenko

    2015-01-01

    Full Text Available A new approach has been proposed for rapid and easy evaluation of a indicator of quality and properties of natural water - soluble salt content (mineralization. The method of quartz crystal microbalance is employed at load of the mass-sensitive resonator electrode (BAW-type with investigated water. The degree of correlation between the various indicators related to the contents of salts and insoluble compounds and the level of mineralization obtained by the standard method (gravimetry has been studied. A procedure for salt weighing by single sensor at unilateral load with small sample of natural water has been developed. The optimal conditions for measurement is established using the design of experiment by model 23 . The possibilities of quartz crystal microbalance for determination of non-volatile compounds in the water are described. The calibration of piezosensor is produced by standard solution NaCl (c = 1.000 g / dm3 at optimal conditions of experiment. The adequacy and accuracy of proposed technique is assessed by the correlation between the results of quartz crystal microbalance and conductometry. The correlation between indicators of mineralization established by quartz crystal microbalance and gravimetry is found. It has been obtained an equation that can be used to calculate the standard indicator of the mineralization by the results of a quartz crystal microbalance using single sensor. The approaches to enhance the analytical capabilities of the developed technique for water with low and high mineralization are proposed. The metrological characteristics of quartz crystal microbalance of insoluble compounds in natural water are estimated. A new technique of determination of the mass concentration of the dry residue in water with a conductivity of 0.2 mS or above has been developed, which can be used for rapid analysis of the water at nonlaboratory conditions and in the laboratory for rapid obtaining the information about a sample.

  2. PROSPECTS OF ENERGY EFFICIENCY IMPROVEMENT AND DEVELOPMENT OF THE RENEWABLE ENERGY SOURCES IN PROVINCE OF VOJVODINA

    Energy Technology Data Exchange (ETDEWEB)

    Gvozdenac, D.; Ciric, R.; Tesic, M.

    2007-07-01

    The paper presents the outcome of the research in the field of energy efficiency improvement and development of the renewable energy sources in province of Vojvodina (Serbia). The summarized results of the paper are: - Potentials for energy efficiency improvement in Vojvodina, - Potentials for development of renewable energy sources in Vojvodina, - Proposal of measures of the energy policy for the promotion of research and development (R and D) which will use local scientific and technical potentials in the field of renewable energy sources and energy efficiency and improve the sustainability on the long run. - Proposal of measures for the energy policy in the domain of renewable energy sources development and energy efficiency and estimation of potentials for improvements by applying proposed measures in order to accomplish established tasks. - Synthesizing findings and proposals in the Action Plan of the Executive Council of the Autonomous Province of Vojvodina for the realization of the medium term program as well as the establishment of the monitoring plan for the assessment of program objectives progress. (auth)

  3. Effects of Nuclear Energy on Sustainable Development and Energy Security: Sodium-Cooled Fast Reactor Case

    Directory of Open Access Journals (Sweden)

    Sungjoo Lee

    2016-09-01

    Full Text Available We propose a stepwise method of selecting appropriate indicators to measure effects of a specific nuclear energy option on sustainable development and energy security, and also to compare an energy option with another. Focusing on the sodium-cooled fast reactor, one of the highlighted Generation IV reactors, we measure and compare its effects with the standard pressurized water reactor-based nuclear power, and then with coal power. Collecting 36 indicators, five experts select seven key indicators to meet data availability, nuclear energy relevancy, comparability among energy options, and fit with Korean energy policy objectives. The results show that sodium-cooled fast reactors is a better alternative than existing nuclear power as well as coal electricity generation across social, economic and environmental dimensions. Our method makes comparison between energy alternatives easier, thereby clarifying consequences of different energy policy decisions.

  4. Coping with climate change and China's wind energy sustainable development

    Directory of Open Access Journals (Sweden)

    De-Xin He

    2016-03-01

    Full Text Available Greenhouse gas emissions are the main cause of today's climate change. To address this problem, the world is in an era of new round energy transformation, and the existing energy structure is being reformed. In this paper, according to the Chinese government's action plan for coping with climate change, the China's wind energy sustainable development goals and development route are discussed, and the countermeasures and suggestions are put forward. Wind energy is currently a kind of important renewable energy with matured technology which can be scale-up developed and put into commercial application, and in this transformation, wind energy will play a key role with other non-fossil energy sources. The development and utilization of wind energy is a systematic project, which needs to be solved from the aspects of policy, technology and management. At present, China is in the stage of transferring from “large wind power country” to “strong wind power country”, opportunities and challenges coexist, and the advantages of China's socialist system could be fully used, which can concentrate power to do big things and make contribution in the process of realizing global energy transformation.

  5. Hawaii energy strategy project 3: Renewable energy resource assessment and development program

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-01

    RLA Consulting (RLA) has been retained by the State of Hawaii Department of Business, Economic Development and Tourism (DBEDT) to conduct a Renewable Energy Resource Assessment and Development Program. This three-phase program is part of the Hawaii Energy Strategy (HES), which is a multi-faceted program intended to produce an integrated energy strategy for the State of Hawaii. The purpose of Phase 1 of the project, Development of a Renewable Energy Resource Assessment Plan, is to better define the most promising potential renewable energy projects and to establish the most suitable locations for project development in the state. In order to accomplish this goal, RLA has identified constraints and requirements for renewable energy projects from six different renewable energy resources: wind, solar, biomass, hydro, wave, and ocean thermal. These criteria were applied to areas with sufficient resource for commercial development and the results of Phase 1 are lists of projects with the most promising development potential for each of the technologies under consideration. Consideration of geothermal energy was added to this investigation under a separate contract with DBEDT. In addition to the project lists, a monitoring plan was developed with recommended locations and a data collection methodology for obtaining additional wind and solar data. This report summarizes the results of Phase 1. 11 figs., 22 tabs.

  6. Sustainable development of energy, water and environment systems

    DEFF Research Database (Denmark)

    Duić, Neven; Guzović, Zvonimir; Kafarov, Vyatcheslav

    2013-01-01

    The 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES Conference), attended by 418 scientists from 55 countries representing six continents. It was held in 2011 and dedicated to the improvement and dissemination of knowledge on methods, policies...... and technologies for increasing the sustainability of development, taking into account its economic, environmental and social pillars, as well as methods for assessing and measuring sustainability of development, regarding energy, transport, water and environment systems and their many combinations....

  7. Bordetella trematum sepsis with shock in a diabetic patient with rapidly developing soft tissue infection.

    Science.gov (United States)

    Majewski, Lorrance L; Nogi, Masayuki; Bankowski, Matthew J; Chung, Heath H

    2016-09-01

    Bordetella is a gram-negative, glucose non-fermenting bacillus, consisting of many host-associated species. B. trematum has previously been identified in wound infections, but rarely known to be a source of bacteremia. Currently, 16S rRNA sequencing represents the reference standard method by which identification is made. Herein, we present a case of fatal B. trematum bacteremia with septic shock. The presumed primary site of the infection was a rapidly developing left leg deep soft tissue infection without necrotizing fasciitis. B. trematum should now be considered as a significant pathogen in sepsis. Copyright © 2016 Elsevier Inc. All rights reserved.

  8. RAPID NAMING IN CHILDREN WITH SPECIFIC LANGUAGE IMPAIRMENT AND IN CHILDREN WITH TYPICAL LANGUAGE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Neda MILOSHEVIĆ

    2017-03-01

    Full Text Available Aimed at the detailed insight into the phonological ability of Serbian-speaking children of preschool age, with and without language impairment, the ability of rapid naming was examined. Method: Operationalization of the set goal was carried out by using the Test for evaluating reading and writing pre-skills. In describing and analyzing the obtained data, methods of descriptive and inferential statistics were used. The sample included 120 subjects of both gender, 40 children diagnosed with specific language impairment (SLI, age from 5,11 to 7 years, and 80 children with typical language development (TLD, age between 5,11 and 7 years, with no statistically significant differences in relation to age and gender of the participants. Results: Summing up the overall results and achievements of children with SLI and children with TLD, we concluded that there are statistically significant differences in the rapid naming between children with specific language impairment and children with typical language development. Conclusions: As it is a global trend to work on preventing disorders and obstructions, and phonological skills in this age are a timely indicator of the development of reading and writing skills, the examined children with SLI are at risk for the occurrence of obstructions and disorders in the area of reading and writing abilities.

  9. Study of developing a database of energy statistics

    Energy Technology Data Exchange (ETDEWEB)

    Park, T.S. [Korea Energy Economics Institute, Euiwang (Korea, Republic of)

    1997-08-01

    An integrated energy database should be prepared in advance for managing energy statistics comprehensively. However, since much manpower and budget is required for developing an integrated energy database, it is difficult to establish a database within a short period of time. Therefore, this study sets the purpose in drawing methods to analyze existing statistical data lists and to consolidate insufficient data as first stage work for the energy database, and at the same time, in analyzing general concepts and the data structure of the database. I also studied the data content and items of energy databases in operation in international energy-related organizations such as IEA, APEC, Japan, and the USA as overseas cases as well as domestic conditions in energy databases, and the hardware operating systems of Japanese databases. I analyzed the making-out system of Korean energy databases, discussed the KEDB system which is representative of total energy databases, and present design concepts for new energy databases. In addition, I present the establishment directions and their contents of future Korean energy databases, data contents that should be collected by supply and demand statistics, and the establishment of data collection organization, etc. by analyzing the Korean energy statistical data and comparing them with the system of OECD/IEA. 26 refs., 15 figs., 11 tabs.

  10. Tracking Change in rapid and eXtreme Development: A Challenge to SCM-tools?

    DEFF Research Database (Denmark)

    Christensen, Henrik Bærbak

    2001-01-01

    Software configuration management (SCM) has proved to be an invaluable part of developing and maintaining high quality software. The benefits are not for free however: SCM tool operations often divert your attention from your development task, sometimes you have to endure a long waiting time while...... the tool does its job, change descriptions must be memorised until your next check-in, etc. This kind of overhead and disruption does not fit well with fast-paced development processes like rapid prototyping, explorative programming, and eXtreme Programming that favour creativity, speed, and communication...... more that managerial rigour. In the cost/benefit equation the balance may tip in favour of not using any SCM tool or only using a fraction of its potential. We think SCM has something to offer such projects, and present some proposals that may allow SCM tools to better suit the characteristics of fast...

  11. Development of the Baldin approach to analysis of hadronic and nuclear processes at high energies

    Science.gov (United States)

    Malakhov, A.; Artemenkov, D.; Lykasov, G.

    2017-11-01

    This article presents the development of the A.M. Baldin approach using a description relativistic nuclear interactions in the four velocity space. This approach allows one to perform calculations of pion yields in hadron-hadron interactions in the central rapidity region depending on the transverse momentum. Results of our calculations have coincided with experimental data in a wide energy range with high precision. This approach gives a good description of the experimental results at high (LHC) and at lower energies (the Nuclotron).

  12. Novel Anodes for Rapid Recharge High Energy Density Lithium-ion Batteries Project

    Data.gov (United States)

    National Aeronautics and Space Administration — TIAX proposes to develop as a novel negative electrode active material for rechargeable lithium-ion batteries. This material will fill the gap between the...

  13. Developing URBAN RENEWABLE ENERGY PROJECTS: OPPORTUNITIES AND CHALLENGES FOR ROMANIA

    OpenAIRE

    Andreea ZAMFIR

    2014-01-01

    This study investigates the public authorities support for the development of renewable energy projects, with an eye to reveal a change of paradigm, in the sense that their role is currently reconsidered and intensified. Therefore, this study reveals firstly the responsibility of the public authorities in the field of renewable energy, and secondly, the main aspects of the public policy in the field of renewable energy, together with its opportunities, challenges and possible solutions. Third...

  14. Noise-control needs in the developing energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Keast, D.N.

    1978-03-01

    The noise characteristics of existing energy conversion technologies, e.g., from obtaining and processing fossil fuels to power plants operations, and of developing energy technologies (wind, geothermal sources, solar energy or fusion systems) are discussed in terms of the effects of noise on humans, animals, structures, and equipment and methods for noise control. Regulations for noise control are described. Recommendations are made for further research on noise control and noise effects. (LCL)

  15. Development of omega-3 rich energy bar with flaxseed

    OpenAIRE

    Mridula, D.; Singh, K K; Barnwal, P.

    2011-01-01

    Energy bar sample were prepared with different levels of flaxseed (0–20%) in addition to cereals and pulses with varying levels of sweeteners (45, 50, and 55%) to deliver a nutritious food to the consumer. The developed bars were evaluated for textural, colour, nutritional quality, sensory attributes and total microbial load. Different levels of flaxseed and sweeteners significantly affected the hue and chroma values of the energy bar. In general the level of flaxseed in energy bar did not af...

  16. Role of State Policy in Renewable Energy Development

    Energy Technology Data Exchange (ETDEWEB)

    Doris, E.; Busche, S.; Hockett, S.; McLaren, J.

    2009-07-01

    State policies can support renewable energy development by driving markets, providing certainty in the investment market, and incorporating the external benefits of the technologies into cost/benefit calculations. Using statistical analyses and policy design best practices, this paper quantifies the impact of state-level policies on renewable energy development in order to better understand the role of policy on development and inform policy makers on the policy mechanisms that provide maximum benefit. The results include the identification of connections between state policies and renewable energy development, as well as a discussion placing state policy efforts in context with other factors that influence the development of renewable energy (e.g. federal policy, resource availability, technology cost, public acceptance).

  17. Energy Development and Environmental NGOs: The Asian Perspective

    Energy Technology Data Exchange (ETDEWEB)

    Gan, Lin

    1998-12-01

    This report compares and analyses the energy-sector activities of non-governmental organizations (NGOs) in Asia. The main focus is on energy development with an environmental orientation such as large hydroelectric power development, energy efficiency improvements, and new and renewable energy development. Specifically, it (1) analyses the motivations, aims, characteristics and means of operation of the NGOs in their involvement in projects related to energy and environment, (2) studies the process of NGOs involvement in decision-making and the extent to which processes are affected by the nature of operation and why, (3) reviews the relationships and means of interaction of NGOs with governmental agencies, international aid organizations and the private sector, (4) examines the influence of international NGOs on local and regional NGOs and the differences in their values and modes of operation, and finally (5) describes the implications of NGO contributions to the emergence of global civil society from an Asian perspective. 28 refs., 1 fig., 1 tab.

  18. Global energy futures and human development: a framework for analysis

    Energy Technology Data Exchange (ETDEWEB)

    Pasternak, A.D. [Lawrence Livermore National Lab., CA (United States)

    2001-07-01

    This paper explores the relationship between measures of human well-being and consumption of energy and electricity. A correlation is shown between the United Nations Human Development Index (HDI) and annual per- capita electricity consumption for 60 populous countries comprising 90% of the world population. In this correlation, HDI reaches a maximum value when electricity consumption is about 4,000 kWh per person per year, well below consumption levels for most developed countries but also well above the level for developing countries. The correlation with electricity use is better than with total primary energy use. Global electricity consumption associated with a ''Human Development Scenario'' is estimated by adding to U.S. Department of Energy projections for the year 2020 increments of additional electricity consumption sufficient to reach 4,000 kWh per capita on a country-by-country basis. A roughly constant ratio of primary energy consumption to electric energy consumption is observed for countries with high levels of electricity use, and this ratio is used to estimate global primary energy consumption in the Human Development Scenario. The Human Development Scenario implies significantly greater global consumption of electricity and primary energy than do projections for 2020 by the DOE and others. (author)

  19. Energy consumption and economic development in Sub-Sahara Africa

    Energy Technology Data Exchange (ETDEWEB)

    Kebede, Ellene [Department of Agricultural and Environmental Science, 210 Campbell, Hall, Tuskegee University, Tuskegee, AL 36088 (United States); Kagochi, John [School of Business Administration, University of Houston-Victoria, 3007, N. Ben Wilson, Victoria, 77901 (United States); Jolly, Curtis M. [Department of Agricultural Economics and Rural Sociology, 212 Comer, Hall Auburn University, AL 36849 (United States)

    2010-05-15

    Sub-Saharan African countries' economic development is dependent on energy consumption. This paper assesses total energy demand, which is composed of traditional energy (wood fuel) and commercial energy (electricity and petroleum), in the Central, East, South, and West regions of Sub-Saharan Africa. Cross-sectional time series data for 20 countries in 25 years are analyzed, and the results of the study show that wood fuel accounts for 70% of energy consumption, followed by petroleum, with most industrial activities utilizing some form of wood fuel. Regression results suggest that energy demand is inversely related to the price of petroleum and industrial development, but positively related to GDP, population growth rate, and agricultural expansion, and that price elasticity is less than one. The model results also show that there are regional differences in energy demand. In addition, the interaction of population growth rates by regions generates mixed results, and there are regional differences in the use of commercial energy consumption, and GDP growth. The findings of this study suggest that countries must diversify their energy sources and introduce energy-efficient devices and equipment at all levels of the economy to improve GDP growth rate and GDP per capita. (author)

  20. Non-Obese Diabetic Mice Rapidly Develop Dramatic Sympathetic Neuritic Dystrophy

    Science.gov (United States)

    Schmidt, Robert E.; Dorsey, Denise A.; Beaudet, Lucie N.; Frederick, Kathy E.; Parvin, Curtis A.; Plurad, Santiago B.; Levisetti, Matteo G.

    2003-01-01

    To address the pathogenesis of diabetic autonomic neuropathy, we have examined the sympathetic nervous system in non-obese diabetic (NOD) and streptozotocin (STZ)-induced diabetic mice, two models of type 1 diabetes, and the db/db mouse, a model of type 2 diabetes. After only 3 to 5 weeks of diabetes, NOD mice developed markedly swollen axons and dendrites (“neuritic dystrophy”) in the prevertebral superior mesenteric and celiac ganglia (SMG-CG), similar to the pathology described in diabetic STZ- and BBW-rat and man. Comparable changes failed to develop in the superior cervical ganglia of the NOD mouse or in the SMG-CG of non-diabetic NOD siblings. STZ-induced diabetic mice develop identical changes, although at a much slower pace and to a lesser degree than NOD mice. NOD-SCID mice, which are genetically identical to NOD mice except for the absence of T and B cells, do not develop diabetes or neuropathology comparable to diabetic NOD mice. However, STZ-treated NOD-SCID mice develop severe neuritic dystrophy, evidence against an exclusively autoimmune pathogenesis for autonomic neuropathy in this model. Chronically diabetic type 2 db/db mice fail to develop neuritic dystrophy, suggesting that hyperglycemia alone may not be the critical and sufficient element. The NOD mouse appears to be a valuable model of diabetic sympathetic autonomic neuropathy with unambiguous, rapidly developing neuropathology which corresponds closely to the characteristic pathology of other rodent models and man. PMID:14578206

  1. Development of a Conceptual Structure for Architectural Solar Energy Systems.

    Science.gov (United States)

    Ringel, Robert F.

    Solar subsystems and components were identified and conceptual structure was developed for architectural solar energy heating and cooling systems. Recent literature related to solar energy systems was reviewed and analyzed. Solar heating and cooling system, subsystem, and component data were compared for agreement and completeness. Significant…

  2. Developing Primary School Children's Understanding of Energy Waste.

    Science.gov (United States)

    Kruger, Colin; Summers, Mike

    2000-01-01

    Studies 34 elementary school children's understanding of five aspects of energy waste and the ways in which these conceptions develop following teaching. Concludes that the children had good prior awareness of some behaviors that save energy, but their reasons for thinking this were based largely on everyday intuitive ideas that involved…

  3. Renewable Energy for Rural Sustainability in Developing Countries

    Science.gov (United States)

    Alazraque-Cherni, Judith

    2008-01-01

    This article establishes the benefits of applying renewable energy and analyzes the main difficulties that have stood in the way of more widely successful renewable energy for rural areas in the developing world and discusses why outcomes from these technologies fall short. Although there is substantial recognition of technological, economic,…

  4. Energy imbalance underlying the development of childhood obesity

    DEFF Research Database (Denmark)

    Butte, Nancy F; Christiansen, Edmund; Sørensen, Thorkild I A

    2007-01-01

    /d of walking at 2.5 mph. DISCUSSION: Halting the development or progression of childhood obesity, as observed in these Hispanic children and adolescents, by counteracting its total energy costs will require a sizable decrease in energy intake and/or reciprocal increase in physical activity....

  5. Old knowledge and new technologies allow rapid development of model organisms.

    Science.gov (United States)

    Cook, Charles E; Chenevert, Janet; Larsson, Tomas A; Arendt, Detlev; Houliston, Evelyn; Lénárt, Péter

    2016-03-15

    Until recently the set of "model" species used commonly for cell biology was limited to a small number of well-understood organisms, and developing a new model was prohibitively expensive or time-consuming. With the current rapid advances in technology, in particular low-cost high-throughput sequencing, it is now possible to develop molecular resources fairly rapidly. Wider sampling of biological diversity can only accelerate progress in addressing cellular mechanisms and shed light on how they are adapted to varied physiological contexts. Here we illustrate how historical knowledge and new technologies can reveal the potential of nonconventional organisms, and we suggest guidelines for selecting new experimental models. We also present examples of nonstandard marine metazoan model species that have made important contributions to our understanding of biological processes. © 2016 Cook et al. This article is distributed by The American Society for Cell Biology under license from the author(s). Two months after publication it is available to the public under an Attribution–Noncommercial–Share Alike 3.0 Unported Creative Commons License (http://creativecommons.org/licenses/by-nc-sa/3.0).

  6. Development of a Recombinase Polymerase Amplification Assay for Rapid Detection of the Mycobacterium avium subsp. paratuberculosis.

    Directory of Open Access Journals (Sweden)

    Sören Hansen

    Full Text Available The detection of Mycobacterium avium subsp. paratuberculosis (MAP infections in ruminants is crucial to control spread among animals and to humans. Cultivation of MAP is seen as the gold standard for detection, although it is very time consuming and labour intensive. In addition, several PCR assays have been developed to detect MAP in around 90 minutes, but these assays required highly sophisticated equipment as well as lengthy and complicated procedure.In this study, we have developed a rapid assay for the detection of MAP based on the recombinase polymerase amplification (RPA assay targeting a MAP specific region, the IS900 gene. The detection limit was 16 DNA molecules in 15 minutes as determined by the probit analysis on eight runs of the plasmid standard. Cross reactivity with other mycobacterial and environmentally associated bacterial strains was not observed. The clinical performance of the MAP RPA assay was tested using 48 MAP-positive and 20 MAP-negative blood, sperm, faecal and tissue samples. All results were compared with reads of a highly sensitive real-time PCR assay. The specificity of the MAP RPA assay was 100%, while the sensitivity was 89.5%.The RPA assay is quicker and much easier to handle than real-time PCR. All RPA reagents were cold-chain independent. Moreover, combining RPA assay with a simple extraction protocol will maximize its use at point of need for rapid detection of MAP.

  7. Development of a lateral flow immunochromatographic assay for the rapid diagnosis of Orf virus infections.

    Science.gov (United States)

    Zhao, Kui; He, Wenqi; Bi, Jingying; Zhang, Ximu; Zhang, Di; Huang, Houshuang; Zhang, Yuexiang; Song, Deguang; Gao, Feng

    2016-10-01

    A rapid and simple lateral-flow immunochromatographic assay (LFIA) was developed for the specific detection of Orf virus (ORFV) using two distinct monoclonal antibodies (MAbs: 5A5 and 6F2) against the ORFV ORF011 protein. The MAb 5A5 was conjugated with colloidal gold, and the MAb 6F2 and goat anti-mouse IgG were sprayed onto a nitrocellulose membrane in strips at positions designated test (T) and control (C), respectively. The results showed that samples of ORFV complexed with colloidal gold-conjugated MAb 5A5, were captured by MAb 6F2 at the T line resulting in the appearance of a purple band. When samples did not contain ORFV or when they contained a quantity of ORFV below the detection limit of the test, only the C line was visible. The analysis of sensitivity of the test demonstrated that the lowest detected quantity of ORFV was 2.03×10(3.0) TCID50/ml. Storage at room temperature for 6 months did not result in the loss of performance of the LFIA test. Using loop-mediated isothermal amplification (LAMP) as a reference test, the relative specificity and sensitivity of the LFIA test were determined to be 100% and 92.1%, respectively. Based on these results, the LFIA test developed may be a suitable tool for rapid on-site testing for ORFV infection. Copyright © 2016 Elsevier B.V. All rights reserved.

  8. Energy and sustainable development. The future is open; Energie et developpement durable. L'avenir est ouvert

    Energy Technology Data Exchange (ETDEWEB)

    Laponche, B.

    2003-07-01

    The author wonders on the place of the energy for the economic development, in the context of the sustainable development. The following subjects are discussed: the place of the energy resource in the economic growth, the energy consumption in the world, the energy production and the energy resources, the environmental impacts of the energy production and consumption, the rational utilization of the energy, the energy prospective. (A.L.B.)

  9. Peptostreptococcus productus strain that grows rapidly with CO as the energy source.

    Science.gov (United States)

    Lorowitz, W H; Bryant, M P

    1984-05-01

    Anaerobic bacteria were enriched with a sewage digestor sludge inoculum and a mineral medium supplemented with B-vitamins and 0.05% yeast extract and with a 50% CO-30% N2-20% CO2 (2 atm [202 kPa]) gas phase. Microscopic observation revealed an abundance of gram-positive cocci, 1.0 by 1.4 micron, which occurred in pairs or chains. The coccus, strain U-1, was isolated by using roll tubes with CO as the energy source. Based on morphology, sugars fermented, fermentation products from glucose (H2, acetate, lactate, and succinate), and other features, strain U-1 was identified as Peptostreptococcus productus IIb (similar to the type strain). The doubling time with up to 50% CO was 1.5 h; acetate and CO2 were the major products. In addition, no significant change in the doubling time was observed with 90% CO. Some stock strains were also able to use CO, although not as well. Strain U-1 produced acetate during growth with H2-CO2. Other C1 compounds did not support growth. Most probable numbers of CO utilizers morphologically identical with strain U-1 were 7.5 X 10(6) and 1.1 X 10(5) cells per g for anaerobic digestor sludge and human feces, respectively.

  10. Development of the Advanced Energy Design Guide for K-12 Schools -- 50% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Bonnema, E.; Leach, M.; Pless, S.; Torcellini, P.

    2013-02-01

    This Technical Support Document (TSD) describes the process and methodology for the development of the Advanced Energy Design Guide for K-12 School Buildings: Achieving 50% Energy Savings Toward a Net Zero Energy Building (AEDG-K12) (ASHRAE et al. 2011a). The AEDG-K12 provides recommendations for achieving 50% whole-building energy savings in K-12 schools over levels achieved by following ANSI/ASHRAE/IESNA Standard 90.1-2004, Energy Standard for Buildings Except Low-Rise Residential Buildings (Standard 90.1-2004) (ASHRAE 2004b). The AEDG-K12 was developed in collaboration with the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE), the American Institute of Architects (AIA), the Illuminating Engineering Society of North America (IES), the U.S. Green Building Council (USGBC), and the U.S. Department of Energy (DOE).

  11. Professional Development Needs of Novice Nursing Clinical Teachers: A Rapid Evidence Assessment.

    Science.gov (United States)

    Jetha, Farah; Boschma, Geertje; Clauson, Marion

    2016-02-26

    The current nursing profession is challenged with a decreasing supply of competent clinical teachers due to several factors consequently impacting the quality of nursing education. To meet this demand, academic nursing programs are resorting to hiring expert nurses who may have little or no teaching experience. They need support during their transition from practice to teaching. Using the systematic approach of a Rapid Evidence Assessment (REA), scholarly literature was reviewed to identify existing professional development needs for novice clinical teachers as well as supportive strategies to aid the transition of experienced nurses into teaching practice. The REA included 29 relevant studies. Findings revealed three main professional development needs for novice clinical teachers and key supportive strategies. Based on these findings recommendations for best practices to support and prepare novice clinical teachers are presented.

  12. Northwest Energy Efficient Manufactured Housing Program Specification Development

    Energy Technology Data Exchange (ETDEWEB)

    Hewes, Tom [Northwest Energy Works of the Building America Partnership for Improved Residential Construction (BA-PIRC), Corvallis, OR (United States); Peeks, Brady [Northwest Energy Works of the Building America Partnership for Improved Residential Construction (BA-PIRC), Corvallis, OR (United States)

    2013-02-01

    The DOE research team Building America Partnership for Improved Residential Construction (BA-PIRC), Bonneville Power Administration (BPA), and Northwest Energy Works (NEW), the current Northwest Energy Efficient Manufactured Home Program (NEEM) program administrator, collaborated to research a new specification that would reduce the energy requirements of a NEEM home.This research identified and developed combinations of cost-effective high performance building assemblies and mechanical systems that can readily can be deployed in the manufacturing setting that reduce energy used for space conditioning, water heating and lighting by 50% over the present NEEM specifications.

  13. Wind Energy Workforce Development: A Roadmap to a Wind Energy Educational Infrastructure (Presentation)

    Energy Technology Data Exchange (ETDEWEB)

    Baring-Gould, I.

    2011-05-01

    Wind Powering America national technical director Ian Baring-Gould made this presentation about workforce development in the wind energy industry to an audience at the American Wind Energy Association's annual WINDPOWER conference in Anaheim. The presentation outlines job projections from the 20% Wind Energy by 2030 report and steps to take at all levels of educational institutions to meet those projections.

  14. Evaluation of new binders using newly developed fracture energy test.

    Science.gov (United States)

    2013-07-01

    This study evaluated a total of seven asphalt binders with various additives : using the newly developed binder fracture energy test. The researchers prepared and : tested PAV-aged and RTFO-plus-PAV-aged specimens. This study confirmed previous : res...

  15. Pioneering developments of marine renewable energy in Australia

    National Research Council Canada - National Science Library

    Manasseh, Richard; McInnes, Kathleen L; Hemer, Mark A

    2017-01-01

    The history of ocean renewable energy developments in Australia is reviewed. A layperson’s description of the physical operating principle is given for the main classes of technology that have been tested in Australian waters...

  16. Rapid crown root development confers tolerance to zinc deficiency in rice

    Directory of Open Access Journals (Sweden)

    Amrit Kaur eNanda

    2016-03-01

    Full Text Available Zinc (Zn deficiency is one of the leading nutrient disorders in rice (Oryza sativa. Many studies have identified Zn efficient rice genotypes, but causal mechanisms for Zn deficiency tolerance remain poorly understood. Here we report a detailed study of the impact of Zn deficiency on crown root development of rice genotypes, differing in their tolerance to this stress. Zn deficiency delayed crown root development and plant biomass accumulation in both Zn efficient and inefficient genotypes, with the effects being much stronger in the latter. Zn efficient genotypes had developed new crown roots as early as three days after transplanting (DAT to a Zn deficient field and that was followed by a significant increase in total biomass by 7 DAT. Zn-inefficient genotypes developed few new crown roots and did not increase biomass during the first seven days following transplanting. This correlated with Zn efficient genotypes retranslocating a higher proportion of shoot Zn to their roots, compared to Zn inefficient genotypes. These latter genotypes were furthermore not efficient in utilizing the limited Zn for root development. Histological analyses indicated no anomalies in crown tissue of Zn-efficient or inefficient genotypes that would have suggested crown root emergence was impeded. We therefore conclude that the rate of crown root initiation was differentially affected by Zn deficiency between genotypes. Rapid crown root development, following transplanting, was identified as a main causative trait for tolerance to Zn deficiency and better Zn retranslocation from shoot to root was a key attribute of Zn-efficient genotypes.

  17. Development of a lateral flow immunoassay for rapid diagnosis of potato blackleg caused by Dickeya species.

    Science.gov (United States)

    Safenkova, Irina V; Zaitsev, Ilya A; Varitsev, Yuri A; Byzova, Nadezhda A; Drenova, Natalia V; Zherdev, Anatoly V; Dzantiev, Boris B

    2017-03-01

    Early detection of potato infections is essential for effective disease management. The aim of this study was to develop a lateral flow immunoassay (LFIA) for rapid detection of a serious potato disease, potato blackleg, caused by Dickeya dianthicola and Dickeya solani. Polyclonal antibodies specific to different strains of Dickeya were obtained from rabbits after immunization with bacterial cells of D. dianthicola and D. solani. Enzyme-linked immunosorbent assay testing with use of a wide range of bacterial species showed that the polyclonal antibodies detect closely related strains of D. dianthicola and D. solani. Cross-reactivity with widespread pathogenic bacteria (nine species) and saprophytes of healthy potato plants was not detected. The LFIA based on the obtained antibodies and gold nanoparticles with average diameter of 20 nm was developed. Under optimized conditions, the LFIA method enabled the analysis of potato extracts within 10 min, with a visual limit of detection of 1 × 10 5  CFU/ml for leaves and 4 × 10 5  CFU/ml for tubers. The assay was tested on potato stem and tuber extracts, and the results of the LFIA were confirmed in 92.1% of samples using the real-time polymerase chain reaction. The findings confirmed that the developed LFIA could be used for monitoring blackleg infection without the need for special equipment or skills. Graphical Abstract The developed lateral flow immunoassay is an efficient tool for rapid detection of a serious potato disease, potato blackleg, caused by Dickeya dianthicola and Dickeya solani.

  18. Energy Efficient Community Development in California: Chula Vista Research Project

    Energy Technology Data Exchange (ETDEWEB)

    Gas Technology Institute

    2009-03-31

    In 2007, the U.S. Department of Energy joined the California Energy Commission in funding a project to begin to examine the technical, economic and institutional (policy and regulatory) aspects of energy-efficient community development. That research project was known as the Chula Vista Research Project for the host California community that co-sponsored the initiative. The researches proved that the strategic integration of the selected and economically viable buildings energy efficiency (EE) measures, photovoltaics (PV), distributed generation (DG), and district cooling can produce significant reductions in aggregate energy consumption, peak demand and emissions, compared to the developer/builder's proposed baseline approach. However, the central power plant emission reductions achieved through use of the EE-DG option would increase local air emissions. The electric and natural gas utility infrastructure impacts associated with the use of the EE and EE-PV options were deemed relatively insignificant while use of the EE-DG option would result in a significant reduction of necessary electric distribution facilities to serve a large-scale development project. The results of the Chula Vista project are detailed in three separate documents: (1) Energy-Efficient Community Development in California; Chula Vista Research Project report contains a detailed description of the research effort and findings. This includes the methodologies, and tools used and the analysis of the efficiency, economic and emissions impacts of alternative energy technology and community design options for two development sites. Research topics covered included: (a) Energy supply, demand, and control technologies and related strategies for structures; (b) Application of locally available renewable energy resources including solar thermal and PV technology and on-site power generation with heat recovery; (c) Integration of local energy resources into district energy systems and existing

  19. Energy and society. [Effects of energy development on natural and societal environments

    Energy Technology Data Exchange (ETDEWEB)

    Starr, C.

    1976-04-01

    It is now clear that quality of life, material welfare, health, employment, and income are affected by energy availability and cost and there is no return to the cheap abundant energy of the past. This paper examines the feasibility of adjusting our energy systems so that we simultaneously decrease unemployment, costs, dependence on foreign resources, undesirable effluents and impacts on the biosphere. The major societal effects of energy systems developed by man can be related to four predominant technical sectors: first, the use of work animals; second, the direct conversion into mechanical work of inanimate stored solar energy (hydropower, wood, farm waste, and fossil fuels); third, the use of electricity as an energy form derived from these sources; and fourth, the use of nuclear energy as a primary source. Since the past and potential impacts of these developments are so many, only a few are explored here - chiefly those relationships of energy flow to the societal materialistic targets of health, security, social stability, upward mobility, and leisure. The traditional target of economic growth may be one of best composite means of achieving all of these materialistic goals, thus, industrial growth has been a prime objective. Other contributors to social development have been greater productivity in agriculture, improved transportation and communications, and shorter working hours. Two main topics discussed are: The Industrialization of Society and Food, Population, and Energy. (MCW)

  20. Geothermal energy in Idaho: site data base and development status

    Energy Technology Data Exchange (ETDEWEB)

    McClain, D.W.

    1979-07-01

    Detailed site specific data regarding the commercialization potential of the proven, potential, and inferred geothermal resource areas in Idaho are presented. To assess the potential for geothermal resource development in Idaho, several kinds of data were obtained. These include information regarding institutional procedures for geothermal development, logistical procedures for utilization, energy needs and forecasted demands, and resource data. Area reports, data sheets, and scenarios were prepared that described possible geothermal development at individual sites. In preparing development projections, the objective was to base them on actual market potential, forecasted growth, and known or inferred resource conditions. To the extent possible, power-on-line dates and energy utilization estimates are realistic projections of the first events. Commercialization projections were based on the assumption that an aggressive development program will prove sufficient known and inferred resources to accomplish the projected event. This report is an estimate of probable energy developable under an aggressive exploration program and is considered extremely conservative. (MHR)

  1. Economic reform, energy, and development: the case of Mexican manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Aguayo, Francisco [El Colegio de Mexico, Program on Science, Technology, and Development (Mexico); Gallagher, Kevin P. [Global Development and Environment Inst., Fletcher School of Law and Diplomacy, Medford, CA (United States); Tufts Univ., Cabot Intercultural Center, Medford, MA (United States)

    2005-05-01

    Given increasing concern over global climate change and national security there is a burgeoning interest in examining the relationship between economic growth and energy use in developed and developing countries. More specifically, decoupling energy use per unit of gross domestic product (GDP) has fast come to be seen as in the interests of national economies and the world as a whole. Recent attention has been paid to the dramatic decreases in the energy intensity of the Chinese economy, which fell by 55% between 1975 and 1995. Do other developing economies follow similar trajectories? This paper examines the energy intensity of the Mexican economy for the period 1988-1998. Although the long-term trend in Mexican energy intensity is rising, the energy intensity of the Mexican economy began to decline in 1988. This paper explores the factors that have contributed to this reduction. Diminishing Mexican energy use per unit of GDP has been driven by significant decreases in industrial energy intensity. We show that these changes have resulted from changes in the composition of Mexican industrial structure, and technological change. (Author)

  2. Development and Validation of a Lateral Flow Immunoassay for Rapid Detection of NDM-Producing Enterobacteriaceae.

    Science.gov (United States)

    Boutal, Hervé; Naas, Thierry; Devilliers, Karine; Oueslati, Saoussen; Dortet, Laurent; Bernabeu, Sandrine; Simon, Stéphanie; Volland, Hervé

    2017-07-01

    The global spread of carbapenemase-producing Enterobacteriaceae (CPE) that are often resistant to most, if not all, classes of antibiotics is a major public health concern. The NDM-1 carbapenemase is among the most worrisome carbapenemases given its rapid worldwide spread. We have developed and evaluated a lateral flow immunoassay (LFIA) (called the NDM LFIA) for the rapid and reliable detection of NDM-like carbapenemase-producing Enterobacteriaceae from culture colonies. We evaluated the NDM LFIA using 175 reference enterobacterial isolates with characterized β-lactamase gene content and 74 nonduplicate consecutive carbapenem-resistant clinical isolates referred for expertise to the French National Reference Center (NRC) for Antibiotic Resistance during a 1-week period (in June 2016). The reference collection included 55 non-carbapenemase producers and 120 carbapenemase producers, including 27 NDM producers. All 27 NDM-like carbapenemase producers of the reference collection were correctly detected in less than 15 min by the NDM LFIA, including 22 strains producing NDM-1, 2 producing NDM-4, 1 producing NDM-5, 1 producing NDM-7, and 1 producing NDM-9. All non-NDM-1 producers gave a negative result with the NDM LFIA. No cross-reaction was observed with carbapenemases (VIM, IMP, NDM, KPC, and OXA-48-like), extended-spectrum β-lactamases (ESBLs) (TEM, SHV, and CTX-M), AmpCs (CMY-2, DHA-2, and ACC-1), and oxacillinases (OXA-1, -2, -9, and -10). Similarly, among the 74 referred nonduplicate consecutive clinical isolates, all 7 NDM-like producers were identified. Overall, the sensitivity and specificity of the assay were 100% for NDM-like carbapenemase detection with strains cultured on agar. The NDM LFIA was efficient, rapid, and easy to implement in the routine workflow of a clinical microbiology laboratory for the confirmation of NDM-like carbapenemase-producing Enterobacteriaceae . Copyright © 2017 Boutal et al.

  3. Development of a rapid dipstick with latex immunochromatographic assay (DLIA for diagnosis of schistosomiasis japonica

    Directory of Open Access Journals (Sweden)

    Lu Shao-Hong

    2011-08-01

    Full Text Available Abstract Background Schistosomiasis japonica (schistosomiasis is a zoonosis that can seriously affect human health. At present, the immunodiagnostic assays for schistosomiasis detection are time-consuming and require well-trained personnel and special instruments, which can limit their use in the field. Thus, there is a pressing need for a simple and rapid immunoassay to screen patients on a large scale. In this study, we developed a novel rapid dipstick with latex immunochromatographic assay (DLIA to detect anti-Schisaosoma japonicum antibodies in human serum. Results Using latex microspheres as a color probe, DLIA was established to test standard positive and negative sera, in comparison with the classical enzyme-linked immunosorbent assay (ELISA. The sensitivity and specificity of DLIA were 95.10% (97/102 and 94.91% (261/275, respectively. The cross-reaction rates with clonorchiosis, intestinal nematodes, Angiostrongylus cantonensis and paragonimiasis were 0, 0, 0 and 42.11% respectively. All the results showed no significant difference to the ELISA. In field tests, 333 human serum samples from an endemic area were tested with DLIA, and compared with ELISA and Kato-Katz method. There was no significant difference between DLIA and ELISA on positive and negative rates of detection; however, significant differences existed between DLIA and Kato-Katz method, and between ELISA and Kato-Katz method. The kappa value between DLIA and ELISA was 0.90. Conclusions This is the first study in which DLIA was used to detect anti-Schistosoma japonicum antibody. The results show that DLIA is a simple, rapid, convenient, sensitive and specific assay for the diagnosis of schistosomiasis and is therefore very suitable for large-scale field applications and clinical detection.

  4. Japanese wind energy development policy: Grand plan or group think?

    Energy Technology Data Exchange (ETDEWEB)

    Valentine, Scott Victor, E-mail: scott.valentine@nus.edu.sg [Lee Kuan Yew School of Public Policy, National University of Singapore (Singapore)

    2011-11-15

    This paper analyzes Japan's national power generation strategy with a view to explaining Japan's phlegmatic approach to wind energy development. The analysis concludes that Japan's current power generation strategy is not optimized to achieve the government's three strategic energy objectives of simultaneously enhancing economic security, national energy security and environmental security (3Es). To achieve long-run energy sustainability, Japan needs to strive to phase out nuclear power, which is the centerpiece of its current power generation strategy. The analysis concludes by offering four suggestions for a sustainable 3E power generation strategy: (1) internalize all external costs associated with power generation technologies in order to level the economic playing field, (2) increase feed-in mandates for renewable energy to 20%, (3) fully liberalize the power generation industry and (4) intensify R and D in energy storage technologies to support intermittent renewable technologies.

  5. Energy management in modern Russia: problems, development trends, prospects

    Science.gov (United States)

    Lezier, Victoria; Gusarova, Miroslava; Kopytova, Anna

    2017-10-01

    The article is dedicated to the relevant issue of implementing energy management in the practice of enterprise management. The status of material resources, which are carriers of energy, has recently changed, natural resources are disappearing from the face and bowels of the earth, so their optimal use is required. Recognition of importance of energy as a significant and exhaustible resource required all countries to look at their use in a new way. The article identifies the main directions for development of energy management in the world, and establishes the risks of its implementation in the Russian economy, both institutional and mental. The authors suggest implementing measures to introduce energy management to enterprises in accordance with the step-by-step implementation method, which assumes flexible, iterative promotion of energy management functions based on pilot models.

  6. Technique for the estimation of surface temperatures from embedded temperature sensing for rapid, high energy surface deposition.

    Energy Technology Data Exchange (ETDEWEB)

    Watkins, Tyson R.; Schunk, Peter Randall; Roberts, Scott Alan

    2014-07-01

    Temperature histories on the surface of a body that has been subjected to a rapid, highenergy surface deposition process can be di cult to determine, especially if it is impossible to directly observe the surface or attach a temperature sensor to it. In this report, we explore two methods for estimating the temperature history of the surface through the use of a sensor embedded within the body very near to the surface. First, the maximum sensor temperature is directly correlated with the peak surface temperature. However, it is observed that the sensor data is both delayed in time and greatly attenuated in magnitude, making this approach unfeasible. Secondly, we propose an algorithm that involves tting the solution to a one-dimensional instantaneous energy solution problem to both the sensor data and to the results of a one-dimensional CVFEM code. This algorithm is shown to be able to estimate the surface temperature 20 C.

  7. Transformation Heat Treatment of Rapidly Quenched Nb3A1 Precursor Monitored in situ by High Energy Synchrotron Diffraction

    CERN Document Server

    Scheuerlein, C; Di Michiel, M; Jin, X; Takeuchi, T; Kikuchi, A; Tsuchiya, K; Nakagawa, K; Nakamoto, T

    2013-01-01

    Nb3Al superconductors are studied for use in high field magnets. Fine grained Nb3Al with nearly stoichiometric Al content is obtained by a Rapid Heating Quenching and Transformation (RHQT) process. We describe a non destructive in situ study of the transformation process step of a RHQ Nb3Al precursor wire with ramp rates of either 120 °C/h or 800 °C/h. High energy synchrotron x-ray diffraction measurements show the transformation from a Nb(Al)SS supersaturated solid solution into Nb3Al. When heating with a ramp rate of 120 °C/h a strong reduction of the Nb(Al)SS (110) diffraction peak component is observed when the temperature exceeds 660 °C. Additional diffraction peaks are detectable in the approximate temperature interval 610 °C - 750 °C and significant Nb3Al growth is observed above 730 °C.

  8. The Rapidity Distributions and the Thermalization Induced Transverse Momentum Distributions in Au-Au Collisions at RHIC Energies

    Directory of Open Access Journals (Sweden)

    Zhi-Jin Jiang

    2017-01-01

    Full Text Available It is widely believed that the quark-gluon plasma (QGP might be formed in the current heavy ion collisions. It is also widely recognized that the relativistic hydrodynamics is one of the best tools for describing the process of expansion and hadronization of QGP. In this paper, by taking into account the effects of thermalization, a hydrodynamic model including phase transition from QGP state to hadronic state is used to analyze the rapidity and transverse momentum distributions of identified charged particles produced in heavy ion collisions. A comparison is made between the theoretical results and experimental data. The theoretical model gives a good description of the corresponding measurements made in Au-Au collisions at RHIC energies.

  9. Recovery Act. Development of a Model Energy Conservation Training Program

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2012-07-05

    The overall objective of this project was to develop an updated model Energy Conservation training program for stationary engineers. This revision to the IUOE National Training Fund’s existing Energy Conservation training curriculum is designed to enable stationary engineers to incorporate essential energy management into routine building operation and maintenance tasks. The curriculum uses a blended learning approach that includes classroom, hands-on, computer simulation and web-based training in addition to a portfolio requirement for a workplace-based learning application. The Energy Conservation training program goal is development of a workforce that can maintain new and existing commercial buildings at optimum energy performance levels. The grant start date was July 6, 2010 and the project continued through September 30, 2012, including a three month non-funded extension.

  10. Sustainable Energy Development: The Key to a Stable Nigeria

    Directory of Open Access Journals (Sweden)

    Kalu Uduma

    2010-06-01

    Full Text Available This paper proposes the use of sustainable energy systems based on solar and biomass technologies to provide solutions to utility challenges in Nigeria and acute water shortage both in rural and urban areas of that country. The paper highlights the paradoxes of oil-rich Nigeria and the stark reality of social infrastructure deprivations in that country. Perennial power outages over many years have translated to the absence of or poorly-developed basic social infrastructures in Nigeria. The consequences of this lack have been an increase in abject poverty in rural and urban communities as well as the erosion of social order and threats to citizen and their property. This paper proposes the adaptation of two emerging technologies for building sustainable energy systems and the development of decentralized and sustainable energy sources as catalyst for much-needed social infrastructure development through the creation of Renewable Energy Business Incubators, creative lending strategies, NGO partnerships and shifting energy-distribution responsibilities. These changes will stimulate grassroots economies in the country, develop large quantities of much needed clean water, maintain acceptable standards of sanitation and improve the health and wellbeing of Nigerian communities. The proposed strategies are specific to the Nigerian context; however, the authors suggest that the same or similar strategies may provide energy and social infrastructure development solutions to other developing countries as well.

  11. Draft South African wind energy technology platform: preliminary wind energy research and development framework

    CSIR Research Space (South Africa)

    Szewczuk, S

    2011-08-01

    Full Text Available The South African Wind Energy Technology Programme (SAWEP) Phase 1 aims to achieve two key strategic outputs that will guide South Africa on wind energy development. One of these outputs is the Wind Atlas for South Africa (WASA) which will play a...

  12. Energy dependence of forward-rapidity J/ψ and ψ(2S) production in pp collisions at the LHC

    Energy Technology Data Exchange (ETDEWEB)

    Acharya, S. [Variable Energy Cyclotron Centre, Kolkata (India); Adamova, D. [Academy of Sciences of the Czech Republic, Rez u Prahy (Czech Republic). Nuclear Physics Inst.; Aggarwal, M.M. [Panjab Univ., Chandigarh (India). Physics Dept.; Collaboration: ALCE Collaboration; and others

    2017-06-15

    We present results on transverse momentum (p{sub t}) and rapidity (y) differential production cross sections, mean transverse momentum and mean transverse momentum square of inclusive J/ψ and ψ(2S) at forward rapidity (2.5 < y < 4) as well as ψ(2S)-to-J/ψ cross section ratios. These quantities are measured in pp collisions at center of mass energies √(s) = 5.02 and 13 TeV with the ALICE detector. Both charmonium states are reconstructed in the dimuon decay channel, using the muon spectrometer. A comprehensive comparison to inclusive charmonium cross sections measured at √(s) = 2.76, 7 and 8 TeV is performed. A comparison to non-relativistic quantum chromodynamics and fixed-order next-to-leading logarithm calculations, which describe prompt and non-prompt charmonium production respectively, is also presented. A good description of the data is obtained over the full p{sub t} range, provided that both contributions are summed. In particular, it is found that for p{sub t} > 15 GeV/c the non-prompt contribution reaches up to 50% of the total charmonium yield. (orig.)

  13. Energy dependence of forward-rapidity [Formula: see text] and [Formula: see text] production in pp collisions at the LHC.

    Science.gov (United States)

    Acharya, S; Adamová, D; Aggarwal, M M; Aglieri Rinella, G; Agnello, M; Agrawal, N; Ahammed, Z; Ahmad, N; Ahn, S U; Aiola, S; Akindinov, A; Alam, S N; Albuquerque, D S D; Aleksandrov, D; Alessandro, B; Alexandre, D; Alfaro Molina, R; Alici, A; Alkin, A; Alme, J; Alt, T; Altsybeev, I; Alves Garcia Prado, C; An, M; Andrei, C; Andrews, H A; Andronic, A; Anguelov, V; Anson, C; Antičić, T; Antinori, F; Antonioli, P; Anwar, R; Aphecetche, L; Appelshäuser, H; Arcelli, S; Arnaldi, R; Arnold, O W; Arsene, I C; Arslandok, M; Audurier, B; Augustinus, A; Averbeck, R; Azmi, M D; Badalà, A; Baek, Y W; Bagnasco, S; Bailhache, R; Bala, R; Baldisseri, A; Ball, M; Baral, R C; Barbano, A M; Barbera, R; Barile, F; Barioglio, L; Barnaföldi, G G; Barnby, L S; Barret, V; Bartalini, P; Barth, K; Bartke, J; Bartsch, E; Basile, M; Bastid, N; Basu, S; Bathen, B; Batigne, G; Batista Camejo, A; Batyunya, B; Batzing, P C; Bearden, I G; Beck, H; Bedda, C; Behera, N K; Belikov, I; Bellini, F; Bello Martinez, H; Bellwied, R; Beltran, L G E; Belyaev, V; Bencedi, G; Beole, S; Bercuci, A; Berdnikov, Y; Berenyi, D; Bertens, R A; Berzano, D; Betev, L; Bhasin, A; Bhat, I R; Bhati, A K; Bhattacharjee, B; Bhom, J; Bianchi, L; Bianchi, N; Bianchin, C; Bielčík, J; Bielčíková, J; Bilandzic, A; Biro, G; Biswas, R; Biswas, S; Blair, J T; Blau, D; Blume, C; Boca, G; Bock, F; Bogdanov, A; Boldizsár, L; Bombara, M; Bonomi, G; Bonora, M; Book, J; Borel, H; Borissov, A; Borri, M; Botta, E; Bourjau, C; Braun-Munzinger, P; Bregant, M; Broker, T A; Browning, T A; Broz, M; Brucken, E J; Bruna, E; Bruno, G E; Budnikov, D; Buesching, H; Bufalino, S; Buhler, P; Buitron, S A I; Buncic, P; Busch, O; Buthelezi, Z; Butt, J B; Buxton, J T; Cabala, J; Caffarri, D; Caines, H; Caliva, A; Calvo Villar, E; Camerini, P; Capon, A A; Carena, F; Carena, W; Carnesecchi, F; Castillo Castellanos, J; Castro, A J; Casula, E A R; Ceballos Sanchez, C; Cerello, P; Chang, B; Chapeland, S; Chartier, M; Charvet, J L; Chattopadhyay, S; Chattopadhyay, S; Chauvin, A; Cherney, M; Cheshkov, C; Cheynis, B; Chibante Barroso, V; Chinellato, D D; Cho, S; Chochula, P; Choi, K; Chojnacki, M; Choudhury, S; Christakoglou, P; Christensen, C H; Christiansen, P; Chujo, T; Chung, S U; Cicalo, C; Cifarelli, L; Cindolo, F; Cleymans, J; Colamaria, F; Colella, D; Collu, A; Colocci, M; Concas, M; Conesa Balbastre, G; Conesa Del Valle, Z; Connors, M E; Contreras, J G; Cormier, T M; Corrales Morales, Y; Cortés Maldonado, I; Cortese, P; Cosentino, M R; Costa, F; Costanza, S; Crkovská, J; Crochet, P; Cuautle, E; Cunqueiro, L; Dahms, T; Dainese, A; Danisch, M C; Danu, A; Das, D; Das, I; Das, S; Dash, A; Dash, S; De, S; De Caro, A; de Cataldo, G; de Conti, C; de Cuveland, J; De Falco, A; De Gruttola, D; De Marco, N; De Pasquale, S; De Souza, R D; Degenhardt, H F; Deisting, A; Deloff, A; Deplano, C; Dhankher, P; Di Bari, D; Di Mauro, A; Di Nezza, P; Di Ruzza, B; Diaz Corchero, M A; Dietel, T; Dillenseger, P; Divià, R; Djuvsland, Ø; Dobrin, A; Domenicis Gimenez, D; Dönigus, B; Dordic, O; Drozhzhova, T; Dubey, A K; Dubla, A; Ducroux, L; Duggal, A K; Dupieux, P; Ehlers, R J; Elia, D; Endress, E; Engel, H; Epple, E; Erazmus, B; Erhardt, F; Espagnon, B; Esumi, S; Eulisse, G; Eum, J; Evans, D; Evdokimov, S; Fabbietti, L; Faivre, J; Fantoni, A; Fasel, M; Feldkamp, L; Feliciello, A; Feofilov, G; Ferencei, J; Téllez, A Fernández; Ferreiro, E G; Ferretti, A; Festanti, A; Feuillard, V J G; Figiel, J; Figueredo, M A S; Filchagin, S; Finogeev, D; Fionda, F M; Fiore, E M; Floris, M; Foertsch, S; Foka, P; Fokin, S; Fragiacomo, E; Francescon, A; Francisco, A; Frankenfeld, U; Fronze, G G; Fuchs, U; Furget, C; Furs, A; Fusco Girard, M; Gaardhøje, J J; Gagliardi, M; Gago, A M; Gajdosova, K; Gallio, M; Galvan, C D; Ganoti, P; Gao, C; Garabatos, C; Garcia-Solis, E; Garg, K; Garg, P; Gargiulo, C; Gasik, P; Gauger, E F; Gay Ducati, M B; Germain, M; Ghosh, P; Ghosh, S K; Gianotti, P; Giubellino, P; Giubilato, P; Gladysz-Dziadus, E; Glässel, P; Goméz Coral, D M; Gomez Ramirez, A; Gonzalez, A S; Gonzalez, V; González-Zamora, P; Gorbunov, S; Görlich, L; Gotovac, S; Grabski, V; Graczykowski, L K; Graham, K L; Greiner, L; Grelli, A; Grigoras, C; Grigoriev, V; Grigoryan, A; Grigoryan, S; Grion, N; Gronefeld, J M; Grosa, F; Grosse-Oetringhaus, J F; Grosso, R; Gruber, L; Grull, F R; Guber, F; Guernane, R; Guerzoni, B; Gulbrandsen, K; Gunji, T; Gupta, A; Gupta, R; Guzman, I B; Haake, R; Hadjidakis, C; Hamagaki, H; Hamar, G; Hamon, J C; Harris, J W; Harton, A; Hatzifotiadou, D; Hayashi, S; Heckel, S T; Hellbär, E; Helstrup, H; Herghelegiu, A; Herrera Corral, G; Herrmann, F; Hess, B A; Hetland, K F; Hillemanns, H; Hippolyte, B; Hladky, J; Hohlweger, B; Horak, D; Hosokawa, R; Hristov, P; Hughes, C; Humanic, T J; Hussain, N; Hussain, T; Hutter, D; Hwang, D S; Ilkaev, R; Inaba, M; Ippolitov, M; Irfan, M; Isakov, V; Islam, M S; Ivanov, M; Ivanov, V; Izucheev, V; Jacak, B; Jacazio, N; Jacobs, P M; Jadhav, M B; Jadlovska, S; Jadlovsky, J; Jaelani, S; Jahnke, C; Jakubowska, M J; Janik, M A; Jayarathna, P H S Y; Jena, C; Jena, S; Jercic, M; Jimenez Bustamante, R T; Jones, P G; Jusko, A; Kalinak, P; Kalweit, A; Kang, J H; Kaplin, V; Kar, S; Karasu Uysal, A; Karavichev, O; Karavicheva, T; Karayan, L; Karpechev, E; Kebschull, U; Keidel, R; Keijdener, D L D; Keil, M; Ketzer, B; Mohisin Khan, M; Khan, P; Khan, S A; Khanzadeev, A; Kharlov, Y; Khatun, A; Khuntia, A; Kielbowicz, M M; Kileng, B; Kim, D; Kim, D W; Kim, D J; Kim, H; Kim, J S; Kim, J; Kim, M; Kim, M; Kim, S; Kim, T; Kirsch, S; Kisel, I; Kiselev, S; Kisiel, A; Kiss, G; Klay, J L; Klein, C; Klein, J; Klein-Bösing, C; Klewin, S; Kluge, A; Knichel, M L; Knospe, A G; Kobdaj, C; Kofarago, M; Kollegger, T; Kolojvari, A; Kondratiev, V; Kondratyeva, N; Kondratyuk, E; Konevskikh, A; Kopcik, M; Kour, M; Kouzinopoulos, C; Kovalenko, O; Kovalenko, V; Kowalski, M; Koyithatta Meethaleveedu, G; Králik, I; Kravčáková, A; Krivda, M; Krizek, F; Kryshen, E; Krzewicki, M; Kubera, A M; Kučera, V; Kuhn, C; Kuijer, P G; Kumar, A; Kumar, J; Kumar, L; Kumar, S; Kundu, S; Kurashvili, P; Kurepin, A; Kurepin, A B; Kuryakin, A; Kushpil, S; Kweon, M J; Kwon, Y; La Pointe, S L; La Rocca, P; Lagana Fernandes, C; Lakomov, I; Langoy, R; Lapidus, K; Lara, C; Lardeux, A; Lattuca, A; Laudi, E; Lavicka, R; Lazaridis, L; Lea, R; Leardini, L; Lee, S; Lehas, F; Lehner, S; Lehrbach, J; Lemmon, R C; Lenti, V; Leogrande, E; León Monzón, I; Lévai, P; Li, S; Li, X; Lien, J; Lietava, R; Lindal, S; Lindenstruth, V; Lippmann, C; Lisa, M A; Litichevskyi, V; Ljunggren, H M; Llope, W J; Lodato, D F; Loenne, P I; Loginov, V; Loizides, C; Loncar, P; Lopez, X; López Torres, E; Lowe, A; Luettig, P; Lunardon, M; Luparello, G; Lupi, M; Lutz, T H; Maevskaya, A; Mager, M; Mahajan, S; Mahmood, S M; Maire, A; Majka, R D; Malaev, M; Maldonado Cervantes, I; Malinina, L; Mal'Kevich, D; Malzacher, P; Mamonov, A; Manko, V; Manso, F; Manzari, V; Mao, Y; Marchisone, M; Mareš, J; Margagliotti, G V; Margotti, A; Margutti, J; Marín, A; Markert, C; Marquard, M; Martin, N A; Martinengo, P; Martinez, J A L; Martínez, M I; Martínez García, G; Martinez Pedreira, M; Mas, A; Masciocchi, S; Masera, M; Masoni, A; Mastroserio, A; Mathis, A M; Matyja, A; Mayer, C; Mazer, J; Mazzilli, M; Mazzoni, M A; Meddi, F; Melikyan, Y; Menchaca-Rocha, A; Meninno, E; Mercado Pérez, J; Meres, M; Mhlanga, S; Miake, Y; Mieskolainen, M M; Mihaylov, D L; Mikhaylov, K; Milano, L; Milosevic, J; Mischke, A; Mishra, A N; Miśkowiec, D; Mitra, J; Mitu, C M; Mohammadi, N; Mohanty, B; Montes, E; Moreira De Godoy, D A; Moreno, L A P; Moretto, S; Morreale, A; Morsch, A; Muccifora, V; Mudnic, E; Mühlheim, D; Muhuri, S; Mukherjee, M; Mulligan, J D; Munhoz, M G; Münning, K; Munzer, R H; Murakami, H; Murray, S; Musa, L; Musinsky, J; Myers, C J; Naik, B; Nair, R; Nandi, B K; Nania, R; Nappi, E; Naru, M U; Natal da Luz, H; Nattrass, C; Navarro, S R; Nayak, K; Nayak, R; Nayak, T K; Nazarenko, S; Nedosekin, A; Negrao De Oliveira, R A; Nellen, L; Nesbo, S V; Ng, F; Nicassio, M; Niculescu, M; Niedziela, J; Nielsen, B S; Nikolaev, S; Nikulin, S; Nikulin, V; Noferini, F; Nomokonov, P; Nooren, G; Noris, J C C; Norman, J; Nyanin, A; Nystrand, J; Oeschler, H; Oh, S; Ohlson, A; Okubo, T; Olah, L; Oleniacz, J; Oliveira Da Silva, A C; Oliver, M H; Onderwaater, J; Oppedisano, C; Orava, R; Oravec, M; Ortiz Velasquez, A; Oskarsson, A; Otwinowski, J; Oyama, K; Pachmayer, Y; Pacik, V; Pagano, D; Pagano, P; Paić, G; Palni, P; Pan, J; Pandey, A K; Panebianco, S; Papikyan, V; Pappalardo, G S; Pareek, P; Park, J; Park, W J; Parmar, S; Passfeld, A; Pathak, S P; Paticchio, V; Patra, R N; Paul, B; Pei, H; Peitzmann, T; Peng, X; Pereira, L G; Pereira Da Costa, H; Peresunko, D; Perez Lezama, E; Peskov, V; Pestov, Y; Petráček, V; Petrov, V; Petrovici, M; Petta, C; Pezzi, R P; Piano, S; Pikna, M; Pillot, P; Pimentel, L O D L; Pinazza, O; Pinsky, L; Piyarathna, D B; Płoskoń, M; Planinic, M; Pluta, J; Pochybova, S; Podesta-Lerma, P L M; Poghosyan, M G; Polichtchouk, B; Poljak, N; Poonsawat, W; Pop, A; Poppenborg, H; Porteboeuf-Houssais, S; Porter, J; Pospisil, J; Pozdniakov, V; Prasad, S K; Preghenella, R; Prino, F; Pruneau, C A; Pshenichnov, I; Puccio, M; Puddu, G; Pujahari, P; Punin, V; Putschke, J; Qvigstad, H; Rachevski, A; Raha, S; Rajput, S; Rak, J; Rakotozafindrabe, A; Ramello, L; Rami, F; Rana, D B; Raniwala, R; Raniwala, S; Räsänen, S S; Rascanu, B T; Rathee, D; Ratza, V; Ravasenga, I; Read, K F; Redlich, K; Rehman, A; Reichelt, P; Reidt, F; Ren, X; Renfordt, R; Reolon, A R; Reshetin, A; Reygers, K; Riabov, V; Ricci, R A; Richert, T; Richter, M; Riedler, P; Riegler, W; Riggi, F; Ristea, C; Rodríguez Cahuantzi, M; Røed, K; Rogochaya, E; Rohr, D; Röhrich, D; Rokita, P S; Ronchetti, F; Ronflette, L; Rosnet, P; Rossi, A; Rotondi, A; Roukoutakis, F; Roy, A; Roy, C; Roy, P; Rubio Montero, A J; Rueda, O V; Rui, R; Russo, R; Rustamov, A; Ryabinkin, E; Ryabov, Y; Rybicki, A; Saarinen, S; Sadhu, S; Sadovsky, S; Šafařík, K; Saha, S K; Sahlmuller, B; Sahoo, B; Sahoo, P; Sahoo, R; Sahoo, S; Sahu, P K; Saini, J; Sakai, S; Saleh, M A; Salzwedel, J; Sambyal, S; Samsonov, V; Sandoval, A; Sarkar, D; Sarkar, N; Sarma, P; Sas, M H P; Scapparone, E; Scarlassara, F; Scharenberg, R P; Scheid, H S; Schiaua, C; Schicker, R; Schmidt, C; Schmidt, H R; Schmidt, M O; Schmidt, M; Schuchmann, S; Schukraft, J; Schutz, Y; Schwarz, K; Schweda, K; Scioli, G; Scomparin, E; Scott, R; Šefčík, M; Seger, J E; Sekiguchi, Y; Sekihata, D; Selyuzhenkov, I; Senosi, K; Senyukov, S; Serradilla, E; Sett, P; Sevcenco, A; Shabanov, A; Shabetai, A; Shadura, O; Shahoyan, R; Shangaraev, A; Sharma, A; Sharma, A; Sharma, M; Sharma, M; Sharma, N; Sheikh, A I; Shigaki, K; Shou, Q; Shtejer, K; Sibiriak, Y; Siddhanta, S; Sielewicz, K M; Siemiarczuk, T; Silvermyr, D; Silvestre, C; Simatovic, G; Simonetti, G; Singaraju, R; Singh, R; Singhal, V; Sinha, T; Sitar, B; Sitta, M; Skaali, T B; Slupecki, M; Smirnov, N; Snellings, R J M; Snellman, T W; Song, J; Song, M; Soramel, F; Sorensen, S; Sozzi, F; Spiriti, E; Sputowska, I; Srivastava, B K; Stachel, J; Stan, I; Stankus, P; Stenlund, E; Stiller, J H; Stocco, D; Strmen, P; Suaide, A A P; Sugitate, T; Suire, C; Suleymanov, M; Suljic, M; Sultanov, R; Šumbera, M; Sumowidagdo, S; Suzuki, K; Swain, S; Szabo, A; Szarka, I; Szczepankiewicz, A; Szymanski, M; Tabassam, U; Takahashi, J; Tambave, G J; Tanaka, N; Tarhini, M; Tariq, M; Tarzila, M G; Tauro, A; Tejeda Muñoz, G; Telesca, A; Terasaki, K; Terrevoli, C; Teyssier, B; Thakur, D; Thakur, S; Thomas, D; Tieulent, R; Tikhonov, A; Timmins, A R; Toia, A; Tripathy, S; Trogolo, S; Trombetta, G; Trubnikov, V; Trzaska, W H; Trzeciak, B A; Tsuji, T; Tumkin, A; Turrisi, R; Tveter, T S; Ullaland, K; Umaka, E N; Uras, A; Usai, G L; Utrobicic, A; Vala, M; Van Der Maarel, J; Van Hoorne, J W; van Leeuwen, M; Vanat, T; Vande Vyvre, P; Varga, D; Vargas, A; Vargyas, M; Varma, R; Vasileiou, M; Vasiliev, A; Vauthier, A; Vázquez Doce, O; Vechernin, V; Veen, A M; Velure, A; Vercellin, E; Vergara Limón, S; Vernet, R; Vértesi, R; Vickovic, L; Vigolo, S; Viinikainen, J; Vilakazi, Z; Villalobos Baillie, O; Villatoro Tello, A; Vinogradov, A; Vinogradov, L; Virgili, T; Vislavicius, V; Vodopyanov, A; Völkl, M A; Voloshin, K; Voloshin, S A; Volpe, G; von Haller, B; Vorobyev, I; Voscek, D; Vranic, D; Vrláková, J; Wagner, B; Wagner, J; Wang, H; Wang, M; Watanabe, D; Watanabe, Y; Weber, M; Weber, S G; Weiser, D F; Wessels, J P; Westerhoff, U; Whitehead, A M; Wiechula, J; Wikne, J; Wilk, G; Wilkinson, J; Willems, G A; Williams, M C S; Windelband, B; Witt, W E; Yalcin, S; Yang, P; Yano, S; Yin, Z; Yokoyama, H; Yoo, I-K; Yoon, J H; Yurchenko, V; Zaccolo, V; Zaman, A; Zampolli, C; Zanoli, H J C; Zardoshti, N; Zarochentsev, A; Závada, P; Zaviyalov, N; Zbroszczyk, H; Zhalov, M; Zhang, H; Zhang, X; Zhang, Y; Zhang, C; Zhang, Z; Zhao, C; Zhigareva, N; Zhou, D; Zhou, Y; Zhou, Z; Zhu, H; Zhu, J; Zhu, X; Zichichi, A; Zimmermann, A; Zimmermann, M B; Zimmermann, S; Zinovjev, G; Zmeskal, J

    2017-01-01

    We present results on transverse momentum ([Formula: see text]) and rapidity ([Formula: see text]) differential production cross sections, mean transverse momentum and mean transverse momentum square of inclusive [Formula: see text] and [Formula: see text] at forward rapidity ([Formula: see text]) as well as [Formula: see text]-to-[Formula: see text] cross section ratios. These quantities are measured in pp collisions at center of mass energies [Formula: see text] and 13 TeV with the ALICE detector. Both charmonium states are reconstructed in the dimuon decay channel, using the muon spectrometer. A comprehensive comparison to inclusive charmonium cross sections measured at [Formula: see text], 7 and 8 TeV is performed. A comparison to non-relativistic quantum chromodynamics and fixed-order next-to-leading logarithm calculations, which describe prompt and non-prompt charmonium production respectively, is also presented. A good description of the data is obtained over the full [Formula: see text] range, provided that both contributions are summed. In particular, it is found that for [Formula: see text] GeV/c the non-prompt contribution reaches up to 50% of the total charmonium yield.

  14. Hawaii Energy Strategy Project 2: Fossil Energy Review. Task IV. Scenario development and analysis

    Energy Technology Data Exchange (ETDEWEB)

    Yamaguchi, N.D.; Breazeale, K. [ed.

    1993-12-01

    The Hawaii Energy Strategy (HES) Program is a seven-project effort led by the State of Hawaii Department of Business, Economic Development & Tourism (DBEDT) to investigate a wide spectrum of Hawaii energy issues. The East-West Center`s Program on Resources: Energy and Minerals, has been assigned HES Project 2, Fossil Energy Review, which focuses on fossil energy use in Hawaii and the greater regional and global markets. HES Project 2 has four parts: Task I (World and Regional Fossil Energy Dynamics) covers petroleum, natural gas, and coal in global and regional contexts, along with a discussion of energy and the environment. Task II (Fossil Energy in Hawaii) focuses more closely on fossil energy use in Hawaii: current utilization and trends, the structure of imports, possible future sources of supply, fuel substitutability, and energy security. Task III`s emphasis is Greenfield Options; that is, fossil energy sources not yet used in Hawaii. This task is divided into two sections: first, an in-depth {open_quotes}Assessment of Coal Technology Options and Implications for the State of Hawaii,{close_quotes} along with a spreadsheet analysis model, which was subcontracted to the Environmental Assessment and Information Sciences Division of Argonne National Laboratory; and second, a chapter on liquefied natural gas (LNG) in the Asia-Pacific market and the issues surrounding possible introduction of LNG into the Hawaii market.

  15. Dilemmas of energy efficient urban development in three Nordic cities

    DEFF Research Database (Denmark)

    Große, Juliane; Fertner, Christian; Groth, Niels Boje

    Energy is high on the agenda of the European Union and in current urban development. In this study we focus on the role of urban planning in energy efficiency in 3 Northern European cities - Turku (FI), Eskilstuna (SE) and Tartu (EE). The case studies were developed in close collaboration between...... the authors and representatives of the cities. The research was carried out by field trips, interviews and analysis of local reports and planning documents. This work was done in the framework of the EU-FP7 project PLEEC (Planning for energy efficient cities), GA no. 314704, www.pleecproject.eu...

  16. Energy Innovation. IVO Group`s Research and Development Report

    Energy Technology Data Exchange (ETDEWEB)

    Salminen, P.; Laiho, Y.; Kaikkonen, H.; Leisio, C.; Hinkkanen, S. [eds.

    1996-11-01

    This annual booklet of the IVO Group`s research and development activities presents a number of articles, written by experts from IVO. The products described are examples of the environmentally-oriented selection made available by the IVO Group. In fact, the entire energy technology developed in Finland is environmentally oriented, if seen from the international perspective. The new business potential of environmental technology is great, and it is believed that in the year 2000, exportation of Finnish know-how in the field of energy-saving and efficiency will exceed the value of out energy imports

  17. Energy Innovation. IVO group`s research and development report

    Energy Technology Data Exchange (ETDEWEB)

    Salminen, P.; Laiho, Y.; Kaikkonen, H.; Leisio, C.; Hinkkanen, S.; Fletcher, R. [eds.

    1997-11-01

    This annual booklet of the IVO Group`s research and development activities presents a number of articles, written by experts from IVO. The products described are examples of the environmentally-oriented selection made available by the IVO Group. In fact, the entire energy technology developed in Finland is environmentally oriented, if seen from the international perspective. The new business potential of environmental technology is great, and it is believed that in the year 2000, exportation of Finnish know-how in the field of energy-saving and efficiency will exceed the value of out energy imports

  18. Pioneering developments of marine renewable energy in Australia

    Directory of Open Access Journals (Sweden)

    Richard Manasseh

    2017-04-01

    Full Text Available The history of ocean renewable energy developments in Australia is reviewed. A layperson’s description of the physical operating principle is given for the main classes of technology that have been tested in Australian waters. The Australian marine domain possesses among the world’s most energetic wave-energy resources, driven by powerful mid-latitude westerly winds. The northern coast of Western Australia has tidal ranges significant on a global scale, and some geographical features around the continent have local tidal resonances. The East Australian Current, one of the world’s major western boundary currents, runs along the eastern Australian seaboard, offering potential for ocean-current energy. Sea-water temperatures in the tropical north-east of Australia may permit ocean thermal energy conversion. While this abundance of resources makes Australia an ideal location for technology development, the population is highly concentrated in a few large cities, and transmission infrastructure has developed over a century to supply cities from traditional power plants. Several wave-power developments have resulted in demonstration of deployments in Australian waters, three of which have been grid connected. Trials of tidal devices have also occurred, while other classes of ocean renewable energy have not yet been trialled. The prospects for marine renewable energy in Australia are discussed including non-traditional applications such as coastal protection and energy export.

  19. A STUDY ON THE INTRODUCTION OF BUS RAPID TRANSIT SYSTEM IN ASIAN DEVELOPING CITIES

    Directory of Open Access Journals (Sweden)

    Thaned SATIENNAM

    2006-01-01

    Full Text Available Bus Rapid Transit (BRT has increasingly become an attractive urban transit alternative in many Asian developing cities due to its cost-effective and flexible implementation. However, it still seems to be difficult to introduce BRT to these cities because almost all of their city structures have been developed under solely a road transport development city plan and weakness of land use control gives rise to many problems, such as urban sprawl, traffic congestion, and air pollution. The purpose of this study was to introduce several strategies to support BRT implementation in Asian developing cities, such as a strategy to appropriately integrate the paratransit system into BRT system as being a feeder along a BRT corridor to supply demand. These proposed strategies were evaluated by applying demand forecasting and emission models to the BRT project plan of Bangkok Metropolitan Administration (BMA in Thailand. It was demonstrated that the proposed strategies could effectively improve the BRT ridership, traffic conditions, and air pollution emission of the entire system in Bangkok. This study could be further extended to include strategy recommendation if a BRT system were to be introduced to other Asian developing cities.

  20. Penerapan Aplikasi Program Penjualan Dan Pembelian Menggunakan Model Rapid Application Development

    Directory of Open Access Journals (Sweden)

    Annisa Febriani

    2017-09-01

    Abstract The development of information technology at the moment quickly and rapidly, supported by one means namely computer. Of course the computer has been equipped with a particular application is used to help facilitate the work of the man to manage the data of an organization or company so that getting accurate results and according to needs. The results of the observations that have been made, showed a sales and purchase activities are still using manual systems, one of them at a clothing store. Starting from the data processing of the goods, the difficulty of checking stock, purchase transaction, sales transactions, as well as other data storage associated with all types of such activities, so that it could make a loss for the store owner, errors in the logging and less akuratnya the report is made. Judging from the large number of transactions done on clothing stores, required system information more quickly and accurately. Thus, the author makes the program architecture-based computer, use the Microsoft Visual Basic.net programming language and the MySQL database, so that the information and activities that occur can be done quickly and accurately. The methods used in making architecture the program using the model of Rapid Application Development (RAD. This RAD model is an adaptation of the waterfall model for high speed version of the development of each component of its software. Results achieved from the discussion of this theme is the form of the application program selling and buying the ready-made. In this case, the use of the application program is the best solution to solve the existing problems, as well as with the use of application programs can be reached by an activity which is effective and efficient in supporting that activity, especially for addressing the problem of the sale and purchase of.   Keywords: Sales Program, Purchasing Program.

  1. Clustering of smoking, alcohol drinking and cannabis use in adolescents in a rapidly developing country

    Directory of Open Access Journals (Sweden)

    Chiolero Arnaud

    2006-06-01

    Full Text Available Abstract Background Smoking, alcohol drinking and cannabis use ("risk behaviors" are often initiated at a young age but few epidemiological studies have assessed their joined prevalence in children in developing countries. This study aims at examining the joint prevalence of these behaviors in adolescents in the Seychelles, a rapidly developing country in the Indian Ocean. Methods Cross-sectional survey in a representative sample of secondary school students using an anonymous self-administered questionnaire (Global Youth Tobacco Survey. The questionnaire was completed by 1,321 (92% of 1,442 eligible students aged 11 to 17 years. Main variables of interest included smoking cigarettes on ≥1 day in the past 30 days; drinking any alcohol beverage on ≥1 day in the past 30 days and using cannabis at least once in the past 12 months. Results In boys and girls, respectively, prevalence (95% CI was 30% (26–34/21% (18–25 for smoking, 49% (45–54/48% (43–52 for drinking, and 17% (15–20/8% (6–10 for cannabis use. The prevalence of all these behaviors increased with age. Smokers were two times more likely than non-smokers to drink and nine times more likely to use cannabis. Drinkers were three times more likely than non-drinkers to smoke or to use cannabis. Comparison of observed versus expected frequencies of combination categories demonstrated clustering of these risk behaviors in students (P Conclusion Smoking, drinking and cannabis use were common and clustered among adolescents of a rapidly developing country. These findings stress the need for early and integrated prevention programs.

  2. Development of field-based separations for the rapid identification of uranium and plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Mertz, Carol J.; Kaminski, Michael D.; Shkrob, Ilya A.; Kalensky, Michael; Sullivan, Vivian S.; Tsai, Yifen

    2015-05-08

    The development of rapid, radioanalytical techniques to separate uranium and plutonium from complex, field samples are needed for the timely and accurate determination of nuclear material origin, and processing activities. Widespread use of nuclear power and technology in the world has increased demands on analytical laboratories from the monitoring of numerous low-level, environmental samples with variable compositions. Environmental sampling has proven to be one of the strongest technical measures for detecting nuclear material and activities. With the increase in sampling demands, new technologies must offer improvements such as automation, high throughput, reproducible chemical separations, short analysis times, and reduced costs to be effective. We have been developing a portable, separations system for uranium (U) and plutonium (Pu) separations based upon selective extraction of target elements using an extraction chromatographic resin which would allow for simple and fast identifcation when coupled with the appropriate sample digestor and detection systems. The microfluidic design minimizes elution volumes and concentrates the elements of interest in a purified stream. Flowsheet development and testing was demonstrated on a single, micro-column system with an acidified, iron, uranium, and plutonium nitrate stream. The recovery of Pu was optimized by examining various reducing agents at different concentrations for rapid, quantitative recovery from the flow-through design. Quantitative recovery and high selectivity of U and Pu was achieved in the appropriate stripping stages and provided purified and concentrated U and Pu streams. The microfluidic system suggests automation in a small, footprint unit while exploiting the in-line processing of extraction chromatographic resins as the primary means of concentrating the radionuclides from the raw acidic feed and separating the elements into purified streams.

  3. Development of a Rapid Salivary Proteomic Platform for Oral Feeding Readiness in the Preterm Newborn

    Directory of Open Access Journals (Sweden)

    Prarthana Khanna

    2017-12-01

    Full Text Available Oral feeding competency is a major determinant of length of stay in the neonatal intensive care unit. An infant must be able to consistently demonstrate the ability to take all required enteral nutrition by mouth before discharge home. Most infants born prematurely (<37 weeks will require days, if not weeks, to master this oral feeding competency skill. Inappropriately timed feeding attempts can lead to acute and long-term morbidities, prolonged hospitalizations, and increased health-care costs. Previously, a panel of five genes involved in essential developmental pathways including sensory integration (nephronophthisis 4, Plexin A1, hunger signaling [neuropeptide Y2 receptor (NPY2R, adenosine-monophosphate-activated protein kinase (AMPK], and facial development (wingless-type MMTV integration site family, member 3 required for oral feeding success were identified in neonatal saliva. This study aimed to translate these five transcriptomic biomarkers into a rapid proteomic platform to provide objective, real-time assessment of oral feeding skills, to better inform care, and to improve neonatal outcomes. Total protein was extracted from saliva of 10 feeding-successful and 10 feeding-unsuccessful infants matched for age, sex, and post-conceptional age. Development of immunoassays was attempted for five oral feeding biomarkers and two reference biomarkers (GAPDH and YWHAZ to normalize for starting protein concentrations. Normalized protein concentrations were correlated to both feeding status at time of sample collection and previously described gene expression profiles. Only the reference proteins and those involved in hunger signaling were detected in neonatal saliva at measurable levels. Expression patterns for NPY2R and AMPK correlated with the gene expression patterns previously seen between successful and unsuccessful feeders and predicted feeding outcome. Salivary proteins associated with hunger signaling are readily quantifiable in

  4. Controlled precipitation for enhanced dissolution rate of flurbiprofen: development of rapidly disintegrating tablets.

    Science.gov (United States)

    Essa, Ebtessam A; Elmarakby, Amira O; Donia, Ahmed M A; El Maghraby, Gamal M

    2017-09-01

    The aim of this work was to investigate the potential of controlled precipitation of flurbiprofen on solid surface, in the presence or absence of hydrophilic polymers, as a tool for enhanced dissolution rate of the drug. The work was extended to develop rapidly disintegrated tablets. This strategy provides simple technique for dissolution enhancement of slowly dissolving drugs with high scaling up potential. Aerosil was dispersed in ethanolic solution of flurbiprofen in the presence and absence of hydrophilic polymers. Acidified water was added as antisolvent to produce controlled precipitation. The resultant particles were centrifuged and dried at ambient temperature before monitoring the dissolution pattern. The particles were also subjected to FTIR spectroscopic, X-ray diffraction and thermal analyses. The FTIR spectroscopy excluded any interaction between flurbiprofen and excipients. The thermal analysis reflected possible change in the crystalline structure and or crystal size of the drug after controlled precipitation in the presence of hydrophilic polymers. This was further confirmed by X-ray diffraction. The modulation in the crystalline structure and size was associated with a significant enhancement in the dissolution rate of flurbiprofen. Optimum formulations were successfully formulated as rapidly disintegrating tablet with subsequent fast dissolution. Precipitation on a large solid surface area is a promising strategy for enhanced dissolution rate with the presence of hydrophilic polymers during precipitation process improving the efficiency.

  5. Evaluation of urban sprawl and urban landscape pattern in a rapidly developing region.

    Science.gov (United States)

    Lv, Zhi-Qiang; Dai, Fu-Qiang; Sun, Cheng

    2012-10-01

    Urban sprawl is a worldwide phenomenon happening particularly in rapidly developing regions. A study on the spatiotemporal characteristics of urban sprawl and urban pattern is useful for the sustainable management of land management and urban land planning. The present research explores the spatiotemporal dynamics of urban sprawl in the context of a rapid urbanization process in a booming economic region of southern China from 1979 to 2005. Three urban sprawl types are distinguished by analyzing overlaid urban area maps of two adjacent study years which originated from the interpretation of remote sensed images and vector land use maps. Landscape metrics are used to analyze the spatiotemporal pattern of urban sprawl for each study period. Study results show that urban areas have expanded dramatically, and the spatiotemporal landscape pattern configured by the three sprawl types changed obviously. The different sprawl type patterns in five study periods have transformed significantly, with their proportions altered both in terms of quantity and of location. The present research proves that urban sprawl quantification and pattern analysis can provide a clear perspective of the urbanization process during a long time period. Particularly, the present study on urban sprawl and sprawl patterns can be used by land use and urban planners.

  6. Development of a fluorescence-based sensor for rapid diagnosis of cyanide exposure.

    Science.gov (United States)

    Jackson, Randy; Oda, Robert P; Bhandari, Raj K; Mahon, Sari B; Brenner, Matthew; Rockwood, Gary A; Logue, Brian A

    2014-02-04

    Although commonly known as a highly toxic chemical, cyanide is also an essential reagent for many industrial processes in areas such as mining, electroplating, and synthetic fiber production. The "heavy" use of cyanide in these industries, along with its necessary transportation, increases the possibility of human exposure. Because the onset of cyanide toxicity is fast, a rapid, sensitive, and accurate method for the diagnosis of cyanide exposure is necessary. Therefore, a field sensor for the diagnosis of cyanide exposure was developed based on the reaction of naphthalene dialdehyde, taurine, and cyanide, yielding a fluorescent β-isoindole. An integrated cyanide capture "apparatus", consisting of sample and cyanide capture chambers, allowed rapid separation of cyanide from blood samples. Rabbit whole blood was added to the sample chamber, acidified, and the HCN gas evolved was actively transferred through a stainless steel channel to the capture chamber containing a basic solution of naphthalene dialdehyde (NDA) and taurine. The overall analysis time (including the addition of the sample) was cyanide exposure. Most importantly, the sensor was 100% accurate in diagnosing cyanide poisoning for acutely exposed rabbits.

  7. Development of novel hybrid poly(l-lactide)/chitosan scaffolds using the rapid freeze prototyping technique

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, N; Chen, X B [Division of Biomedical Engineering, University of Saskatchewan, Saskatoon, Saskatchewan (Canada); Li, M G [Department of Mechanical Engineering, University of Saskatchewan, Saskatoon, Saskatchewan (Canada); Cooper, D, E-mail: xbc719@mail.usask.ca [Department of Anatomy and Cell Biology, University of Saskatchewan, Saskatoon, Saskatchewan (Canada)

    2011-09-15

    Engineered scaffolds have been shown to be critical to various tissue engineering applications. This paper presents the development of a novel three-dimensional scaffold made from a mixture of chitosan microspheres (CMs) and poly(l-lactide) by means of the rapid freeze prototyping (RFP) technique. The CMs were used to encapsulate bovine serum albumin (BSA) and improve the scaffold mechanical properties. Experiments to examine the BSA release were carried out; the BSA release could be controlled by adjusting the crosslink degree of the CMs and prolonged after the CMs were embedded into the PLLA scaffolds, while the examination of the mechanical properties of the scaffolds illustrates that they depend on the ratio of CMs to PLLA in the scaffolds as well as the cryogenic temperature used in the RFP fabrication process. The chemical characteristics of the PLLA/chitosan scaffolds were evaluated by Fourier transform infrared (FTIR) spectroscopy. The morphological and pore structure of the scaffolds were also examined by scanning electron microscopy and micro-tomography. The results obtained show that the scaffolds have higher porosity and enhanced pore size distribution compared to those fabricated by the dispensing-based rapid prototyping technique. This study demonstrates that the novel scaffolds have not only enhanced porous structure and mechanical properties but also showed the potential to preserve the bioactivities of the biomolecules and to control the biomolecule distribution and release rate.

  8. Technical Support Document: Development of the Advanced Energy Design Guide for Grocery Stores--50% Energy Savings

    Energy Technology Data Exchange (ETDEWEB)

    Hale, E. T.; Macumber, D. L.; Long, N. L.; Griffith, B. T.; Benne, K. S.; Pless, S. D.; Torcellini, P. A.

    2008-09-01

    This report provides recommendations that architects, designers, contractors, developers, owners, and lessees of grocery store buildings can use to achieve whole-building energy savings of at least 50% over ASHRAE Standard 90.1-2004.

  9. International Standards to Develop and Promote Energy Efficiency and Renewable Energy Sources

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    International Standards are a powerful tool for disseminating new technologies and good practices, developing global markets and supporting the harmonization of government policies on energy efficiency and renewable sources on a global scale.

  10. Present situation of the development of petroleum substitution energy (the U.S.); Sekiyu daitai energy kaihatsu no genjo (Beikoku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    The paper investigates and reports the trend of the development of petroleum substitution energy in the U.S. The Clean Coal Technology Plan is one of the plans which were implemented most successfully in the past several years. The plan made a remarkable reduction in NOx and SOx emissions possible. As for natural gas, importance is placed on improvement of production/storage technology of natural gas and high-effective low-NOx-emission turbines. As to the research on nuclear reactors, importance is now placed on the light water reactor plan, and the target is the design and development of such nuclear reactors as electric power companies pay attention to. The solar cell industry is markedly developing, and the shipment grows 17% per year. However, the price is rapidly declining. The wind turbine and biomass power generation plans are also advanced, and most of the plans are aimed at the development of new fields of application. With regard to geothermal energy, slowness is seen. Concerning electric vehicles, no makers enter into the quantity production, but the research and development are actively being made. 72 refs., 26 figs., 51 tabs.

  11. Final Report - Development of a Strategic Energy Plan

    Energy Technology Data Exchange (ETDEWEB)

    Maracas, Kate; Hooks, Todd

    2006-11-30

    The Agua Caliente Band of Cahuilla Indians was awarded a grant under the U.S. Department of Energy’s (“DOE”) Tribal Energy Program to develop a comprehensive Tribal energy plan. The grant, awarded under DOE’s First Steps program, supported the development of a strategic energy plan that integrates with the Tribe’s overall planning and economic development goals, and aligns with Tribal cultural, social, political, and spiritual values. The Tribe set out to incorporate its energy plan into (i) a broader economic development strategy developed by investigators at the University of California at Riverside, and (ii) the overarching goals for job-creation and wealth-creation that are held by both the Tribe and the surrounding Coachella Valley. With these wide-ranging objectives in mind, the Tribe and its consultant, Red Mountain Energy Partners, engaged in a phased approach to creating the strategic energy plan. As illustrated in Figure 1 below, the proposed approach involved both “serial” and “parallel” activities. The capacity-building component of this approach occurred throughout the duration of the project period.

  12. SUSTAINABLE DEVELOPMENT, ENERGY AND CLIMATE CHANGE IN THE EUROPEAN UNION

    Directory of Open Access Journals (Sweden)

    Andrei ROTH

    2015-04-01

    Full Text Available Through sustainable development the needs of the current generation are fulfilled without jeopardizing the opportunities of future generations. The concept takes into account economic, social and environmental considerations. It has a wide range of applications from natural resources to population growth and biodiversity. One of its most important themes is energy. In this area, sustainable development relates with resource availability and green house gases emissions. Also it takes into account the needs of people without access to energy, and their legitimate quest for development. For the European Union, sustainable development represents an overarching objective. The present article analyzes the concept from a theoretical perspective, contrasting its strong points and weaknesses. It highlights the relation between sustainable development, energetic resources and climate change. The EU policies results in the field of energy are analyzed from the perspective of resources, energetic dependency and climate change efforts.

  13. Energy availabilities for state and local development: projected energy patterns for 1985 and 1990

    Energy Technology Data Exchange (ETDEWEB)

    Vogt, D. P.; Rice, P. L.; Corey, T. A.; Pai, V. P.

    1979-11-01

    This report (one of a series) presents projections of the energy supply, demand, and net imports of seven fuel types (gasoline, distillates, residual oil, crude, natural gas, coal, electricity) and four final consuming sectors. To facilitate detailed regional analysis these projections have been prepared for Bureau of Economic Analysis (BEA) areas, states, census regions, and the nation for 1985 and 1990. The data are formatted to present regional energy availability from primary extraction, as well as from energy-transformation processes. The tables depict energy balances between availability and use for each specific fuel. The objective of this series is to provide a consistent base of historic and projected energy information within a standard format. Such a framework should aid regional policymakers in their consideration of regional growth issues that may be influenced by the regional energy system. However, for analysis of specific regions, this basic data should be supplemented by additional information which only the local policy analyst can bring to bear in his or her assessment of the energy conditions that characterize the region. Earlier volumes in this series have proved useful for both specific and general analysis of this type, and it is hoped that the current volume will prove equally so. This volume presents an updated benchmark projection series, which captures recent developments in the business as usual projections of energy supply and consumption due to national policy developments since the 1976 National Energy Outlook projection series were prepared.

  14. A National Plan for Energy Research, Development and Demonstration: Creating Energy Choices for the Future (1976)

    Energy Technology Data Exchange (ETDEWEB)

    Seamans, Jr., Robert C. [Energy Research and Development Administration (ERDA), Washington, DC (United States)

    1976-04-15

    This is the first annual update of the initial report submitted to you in June 1975 (ERDA-48), and complies with the requirements of Section 15 of the Federal Nonnuclear Energy Research and Development Act of 1974. This report represents an evolution in approach over the previous document. ERDA's proposed National Plan has been expanded in scope and depth of coverage and the basic goals and strategy are refined, but remain essentially intact. The Plan summarizes ERDA's current views on the energy technologies the Nation will need to achieve longer-term energy independence, specifically: The paramount role of the private sector in the development and commercialization of new energy technologies is addressed; Conservation (energy efficiency) technologies are singled out for increased attention and are now ranked with several supply technologies as being of the highest priority for national action; The President's 1977 budget requests a large increase - 30% over 1976 - in funding for energy RD&D with particular emphasis on accelerating energy RD&D programs directed at achieving greater long-term energy independence, encouraging cost-sharing with private industry and avoiding the undertaking of RD&D more appropriately the responsibility of the private sector, and supporting the commercial demonstration of synthetic fuel production by providing loan guarantees beginning in FY 76; Federal programs to assist industry in accelerating the market penetration of energy technologies with near-term potential are a key element of the Plan.

  15. Dispatch Strategy Development for Grid-tied Household Energy Systems

    Science.gov (United States)

    Cardwell, Joseph

    The prevalence of renewable generation will increase in the next several decades and offset conventional generation more and more. Yet this increase is not coming without challenges. Solar, wind, and even some water resources are intermittent and unpredictable, and thereby create scheduling challenges due to their inherent "uncontrolled" nature. To effectively manage these distributed renewable assets, new control algorithms must be developed for applications including energy management, bridge power, and system stability. This can be completed through a centralized control center though efforts are being made to parallel the control architecture with the organization of the renewable assets themselves--namely, distributed controls. Building energy management systems are being employed to control localized energy generation, storage, and use to reduce disruption on the net utility load. One such example is VOLTTRONTM, an agent-based platform for building energy control in real time. In this thesis, algorithms developed in VOLTTRON simulate a home energy management system that consists of a solar PV array, a lithium-ion battery bank, and the grid. Dispatch strategies are implemented to reduce energy charges from overall consumption (/kWh) and demand charges (/kW). Dispatch strategies for implementing storage devices are tuned on a month-to-month basis to provide a meaningful economic advantage under simulated scenarios to explore algorithm sensitivity to changing external factors. VOLTTRON agents provide automated real-time optimization of dispatch strategies to efficiently manage energy supply and demand, lower consumer costs associated with energy usage, and reduce load on the utility grid.

  16. Assessing local population vulnerability to wind energy development with branching process models: an application to wind energy development

    Science.gov (United States)

    Erickson, Richard A.; Eager, Eric A.; Stanton, Jessica C.; Beston, Julie A.; Diffendorfer, James E.; Thogmartin, Wayne E.

    2015-01-01

    Quantifying the impact of anthropogenic development on local populations is important for conservation biology and wildlife management. However, these local populations are often subject to demographic stochasticity because of their small population size. Traditional modeling efforts such as population projection matrices do not consider this source of variation whereas individual-based models, which include demographic stochasticity, are computationally intense and lack analytical tractability. One compromise between approaches is branching process models because they accommodate demographic stochasticity and are easily calculated. These models are known within some sub-fields of probability and mathematical ecology but are not often applied in conservation biology and applied ecology. We applied branching process models to quantitatively compare and prioritize species locally vulnerable to the development of wind energy facilities. Specifically, we examined species vulnerability using branching process models for four representative species: A cave bat (a long-lived, low fecundity species), a tree bat (short-lived, moderate fecundity species), a grassland songbird (a short-lived, high fecundity species), and an eagle (a long-lived, slow maturation species). Wind turbine-induced mortality has been observed for all of these species types, raising conservation concerns. We simulated different mortality rates from wind farms while calculating local extinction probabilities. The longer-lived species types (e.g., cave bats and eagles) had much more pronounced transitions from low extinction risk to high extinction risk than short-lived species types (e.g., tree bats and grassland songbirds). High-offspring-producing species types had a much greater variability in baseline risk of extinction than the lower-offspring-producing species types. Long-lived species types may appear stable until a critical level of incidental mortality occurs. After this threshold, the risk of

  17. Development of a novel multiplex PCR assay for rapid detection of virulence associated genes of Pasteurella multocida from pigs

    National Research Council Canada - National Science Library

    Rajkhowa, S

    2015-01-01

    Significance and Impact of the Study: The study reports the development and evaluation of a novel multiplex PCR assay for the rapid detection of 11 important VAGs of Pasteurella multocida isolates from pigs...

  18. Fusion for Energy: A new European organization for the development of fusion energy

    Energy Technology Data Exchange (ETDEWEB)

    Gambier, Didier [Fusion for Energy, Torres Diagonal Litoral B3 (TDL-B3), Josep Pla 2, 08019 Barcelona (Spain)], E-mail: Didier.gambier@f4e.europa.eu

    2009-06-15

    The European Joint Undertaking for ITER and the Development of Fusion Energy or ('Fusion for Energy' of F4E for short) is a new organisation that has been established with the main objective of providing Europe's contribution to the ITER International Organisation (IO) as its Domestic Agency. Fusion for Energy is also the Implementing Agency for the Broader Approach projects being carried out with Japan and, in the longer term, will prepare a programme for the construction of demonstration fusion reactors (DEMO). The threefold mission of Fusion for Energy is consistent with the fast track strategy for the realisation of fusion energy. This paper aims to provide an overview of the current status of Fusion for Energy and highlight some of the opportunities available for research organisations and industry to participate.

  19. Renewable energies and national development; Energies renouvelables et amenagement du territoire

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This document brings together the communications presented at this colloquium on renewable energy sources and the debates that took place during the round-tables. The aim of the colloquium was to take stock of the present day situation of the development of renewable energies in France, to share experiences and to discuss the conditions of implementation and development of renewable energies in particular in accommodations and tertiary buildings (solar thermal and photovoltaic) and in collective services (wood-fuel, cogeneration units, bio-automotive fuels, geothermal energy and biogas). One round table was devoted to the electricity produced from renewable energy sources (hydro- and wind power, cogeneration units, photovoltaic) and to the problem of connection of decentralized power generation units to the national grid (tariffs, legal aspects, administrative procedures) in the new context of deregulation of electricity markets. (J.S.)

  20. Development of a New Decision Tree to Rapidly Screen Chemical Estrogenic Activities of Xenopus laevis.

    Science.gov (United States)

    Wang, Ting; Li, Weiying; Zheng, Xiaofeng; Lin, Zhifen; Kong, Deyang

    2014-02-01

    During the last past decades, there is an increasing number of studies about estrogenic activities of the environmental pollutants on amphibians and many determination methods have been proposed. However, these determination methods are time-consuming and expensive, and a rapid and simple method to screen and test the chemicals for estrogenic activities to amphibians is therefore imperative. Herein is proposed a new decision tree formulated not only with physicochemical parameters but also a biological parameter that was successfully used to screen estrogenic activities of the chemicals on amphibians. The biological parameter, CDOCKER interaction energy (Ebinding ) between chemicals and the target proteins was calculated based on the method of molecular docking, and it was used to revise the decision tree formulated by Hong only with physicochemical parameters for screening estrogenic activity of chemicals in rat. According to the correlation between Ebinding of rat and Xenopus laevis, a new decision tree for estrogenic activities in Xenopus laevis is finally proposed. Then it was validated by using the randomly 8 chemicals which can be frequently exposed to Xenopus laevis, and the agreement between the results from the new decision tree and the ones from experiments is generally satisfactory. Consequently, the new decision tree can be used to screen the estrogenic activities of the chemicals, and combinational use of the Ebinding and classical physicochemical parameters can greatly improves Hong's decision tree. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Anesthetics rapidly promote synaptogenesis during a critical period of brain development.

    Directory of Open Access Journals (Sweden)

    Mathias De Roo

    Full Text Available Experience-driven activity plays an essential role in the development of brain circuitry during critical periods of early postnatal life, a process that depends upon a dynamic balance between excitatory and inhibitory signals. Since general anesthetics are powerful pharmacological modulators of neuronal activity, an important question is whether and how these drugs can affect the development of synaptic networks. To address this issue, we examined here the impact of anesthetics on synapse growth and dynamics. We show that exposure of young rodents to anesthetics that either enhance GABAergic inhibition or block NMDA receptors rapidly induce a significant increase in dendritic spine density in the somatosensory cortex and hippocampus. This effect is developmentally regulated; it is transient but lasts for several days and is also reproduced by selective antagonists of excitatory receptors. Analyses of spine dynamics in hippocampal slice cultures reveals that this effect is mediated through an increased rate of protrusions formation, a better stabilization of newly formed spines, and leads to the formation of functional synapses. Altogether, these findings point to anesthesia as an important modulator of spine dynamics in the developing brain and suggest the existence of a homeostatic process regulating spine formation as a function of neural activity. Importantly, they also raise concern about the potential impact of these drugs on human practice, when applied during critical periods of development in infants.

  2. Development of enhanced piezoelectric energy harvester induced by human motion.

    Science.gov (United States)

    Minami, Y; Nakamachi, E

    2012-01-01

    In this study, a high frequency piezoelectric energy harvester converted from the human low vibrated motion energy was newly developed. This hybrid energy harvester consists of the unimorph piezoelectric cantilever and a couple of permanent magnets. One magnet was attached at the end of cantilever, and the counterpart magnet was set at the end of the pendulum. The mechanical energy provided through the human walking motion, which is a typical ubiquitous presence of vibration, is converted to the electric energy via the piezoelectric cantilever vibration system. At first, we studied the energy convert mechanism and the performance of our energy harvester, where the resonance free vibration of unimorph cantilever with one permanent magnet under a rather high frequency was induced by the artificial low frequency vibration. The counterpart magnet attached on the pendulum. Next, we equipped the counterpart permanent magnet pendulum, which was fluctuated under a very low frequency by the human walking, and the piezoelectric cantilever, which had the permanent magnet at the end. The low-to-high frequency convert "hybrid system" can be characterized as an enhanced energy harvest one. We examined and obtained maximum values of voltage and power in this system, as 1.2V and 1.2 µW. Those results show the possibility to apply for the energy harvester in the portable and implantable Bio-MEMS devices.

  3. Concept Development of Optimal Mine Site Energy Supply

    Directory of Open Access Journals (Sweden)

    Monica Carvalho

    2012-11-01

    Full Text Available This paper reports on early work and concept development for Optimal Mine Site Energy Supply, where the specific energy supply requirements and constraints for mineral production operations are considered against methodologies that have been applied for other sectors and in other energy policy regimes. The primary motivation for this research is to help ensure that Canadian mineral producers will achieve reduced production costs through improvements in the efficiency with which they consume energy resources. Heat has not yet been considered for the mining sector in an integrated manner, which makes polygeneration of great interest. The methodology that optimizes configuration of polygeneration systems for mine sites has not been reported before. The variety of mining circumstances, temporal variations in energy prices, institutional inertia, and conservatism in design for mines are some of the reasons for this. This paper reviews some aspects of precedent energy management practice in mineral operations, which highlights energy challenges characteristic of the sector and sets out the initial formulation of optimal mine site energy supply. The review indicates the additional benefits of energy supply systems for mine sites that concurrently meet all utilities.

  4. Locally Appropriate Energy Strategies for the Developing World: A focus on Clean Energy Opportunities in Borneo

    Science.gov (United States)

    Shirley, Rebekah Grace

    This dissertation focuses on an integration of energy modeling tools to explore energy transition pathways for emerging economies. The spate of growth in the global South has led to a global energy transition, evidenced in part by a surge in the development of large scale energy infrastructure projects for the provision of reliable electricity service. The rational of energy security and exigency often usher these large scale projects through to implementation with minimal analysis of costs: social and environmental impact, ecological risk, or opportunity costs of alternative energy transition pathways foregone. Furthermore, development of energy infrastructure is inherently characterized by the involvement of a number of state and non-state actors, with varying interests, objectives and access to authority. Being woven through and into social institutions necessarily impacts the design, control and functionality of infrastructure. In this dissertation I therefore conceptualize energy infrastructure as lying at the intersection, or nexus, of people, the environment and energy security. I argue that energy infrastructure plans and policy should, and can, be informed by each of these fields of influence in order to appropriately satisfy local development needs. This case study explores the socio-techno-environmental context of contemporary mega-dam development in northern Borneo. I describe the key actors of an ongoing mega-dam debate and the constellation of their interaction. This highlights the role that information may play in public discourse and lends insight into how inertia in the established system may stymie technological evolution. I then use a combination of power system simulation, ecological modeling and spatial analysis to analyze the potential for, and costs and tradeoffs of, future energy scenarios. In this way I demonstrate reproducible methods that can support energy infrastructure decision making by directly addressing data limitation barriers. I

  5. Diagnosis and treatment of familial cherubism characterized by early onset and rapid development.

    Science.gov (United States)

    Mortellaro, Carmen; Bello, Lucilla; Lucchina, Alberta Greco; Pucci, Angela

    2009-01-01

    Cherubism is a benign maxillary bone dysplasia of childhood, usually showing an autosomically dominant inheritance with variable penetrance and spontaneously resolving after puberty. Only maxillary bones are affected and develop pseudocystic osteolytic lesions. This article presents an early and rapidly evolving familial case of cherubism. The 3-year-old child underwent conservative curettage of lesions, with a conservative approach that allowed a normal permanent dentition in adolescence. Family history revealed that the father had been treated for similar lesions between 14 and 21 years of age, but the late treatment caused edentulism. In conclusion, although cherubism represents a benign and localized maxillary dysplasia, it requires prompt surgical but conservative treatment and careful follow-up to avoid permanent lesions, that is, malocclusion and/or edentulism.

  6. Rapid Development and Use of a Nationwide Training Program for Cholera Management, Haiti, 2010

    Science.gov (United States)

    Lynch, Michael; Lambert, Yves; Sobel, Jeremy; Domerçant, Jean W.; Khan, Azharul

    2011-01-01

    When epidemic cholera appeared in Haiti in October 2010, the medical community there had virtually no experience with the disease and needed rapid training as the epidemic spread throughout the country. We developed a set of training materials specific to Haiti and launched a cascading training effort. Through a training-of-trainers course in November 14–15, 2010, and department-level training conducted in French and Creole over the following 3 weeks, 521 persons were trained and equipped to further train staff at the institutions where they worked. After the training, the hospitalized cholera patients’ case-fatality rate dropped from 4% to <2% by mid-December and was <1% by January 2011. Continuing in-service training, monitoring and evaluation, and integration of cholera management into regular clinical training will help sustain this success. PMID:22099112

  7. Development of Middle Stone Age innovation linked to rapid climate change.

    Science.gov (United States)

    Ziegler, Martin; Simon, Margit H; Hall, Ian R; Barker, Stephen; Stringer, Chris; Zahn, Rainer

    2013-01-01

    The development of modernity in early human populations has been linked to pulsed phases of technological and behavioural innovation within the Middle Stone Age of South Africa. However, the trigger for these intermittent pulses of technological innovation is an enigma. Here we show that, contrary to some previous studies, the occurrence of innovation was tightly linked to abrupt climate change. Major innovational pulses occurred at times when South African climate changed rapidly towards more humid conditions, while northern sub-Saharan Africa experienced widespread droughts, as the Northern Hemisphere entered phases of extreme cooling. These millennial-scale teleconnections resulted from the bipolar seesaw behaviour of the Atlantic Ocean related to changes in the ocean circulation. These conditions led to humid pulses in South Africa and potentially to the creation of favourable environmental conditions. This strongly implies that innovational pulses of early modern human behaviour were climatically influenced and linked to the adoption of refugia.

  8. [Development and scientific rationale for a universal index for rapid assessment of readability].

    Science.gov (United States)

    Teksheva, L M

    2007-01-01

    The hygienic regulations of academic books, including teachware, for children and adolescents necessitate the performance of special studies to assess their readability by the unified procedure that would suggest a visual response while reading. This study has developed and warranted a universal readability index by the velocity of reading. There are significant regression correlations between the velocity of reading as the readability index and the degree of tiredness, detected by various visual functions. The parameters of accommodation and adaptive properties of the eye are most sensitive to visual load on reading. Reading velocity as an indicator of readability of illogical texts may be used as a rapid method under laboratory and natural conditions to determine the action of various textual loads on the visual system.

  9. Renewable energies for the South. New support for clean energy investment in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Jung, W.; Schmitz-Borchert, H.P. (eds.)

    2001-07-01

    At the beginning of the 21st century there are still more than two billion people in the world without access to electricity and basic energy services. 'Energy poverty' impedes sustainable economic, social and environmental development of rural areas in developing countries. Large-scale diffusion of renewable energy technologies can help to overcome this situation. Major barriers are now beginning to be removed. This volume is the result of an international symposium on 'Renewable Energies for the South', held at the Science Park Gelsenkirchen, Gelsenkirchen/Germany. In took place on June 5-6, 2000 with more than 200 participants from 27 countries. The conference aimed at enhancing the dialogue between the multiple groups and actors involved in the development, transfer and application of renewable energy technologies. The following issues are covered in this book: - technology needs and framework conditions in developing countries - appropriate renewable energy technologies - financing renewable energy investment - capacity building and training programmes. (orig.)

  10. Development of cross-priming amplification assays for rapid and sensitive detection of Aeromonas hydrophila.

    Science.gov (United States)

    Meng, S; Wang, Y; Wang, Y; Liu, D; Ye, C

    2015-08-01

    Aeromonas hydrophila has been increasingly implicated as the aetiologic agent of various human diseases. Therefore, reliable laboratory detection and identification of this bacterium has become clinically and epidemiologically desirable. We developed a nearly instrument-free, simple molecular method for rapid detection of Aer. hydrophila using a cross-priming amplification (CPA) assay with the desA gene as the target. The desA gene is crucial for the survival and growth of Aer. hydrophila under iron starvation. The results can be visualized as colour changes without opening the reaction tubes. No false-positive results were observed for the 33 non-Aer. hydrophila strains tested to evaluate assay specificity. The limit of detection for Aer. hydrophila was approximately 200 copies of desA per reaction (on reference plasmids) and 5 × 10(3)  CFU g(-1) Aer. hydrophila in simulated human stool, which is the same sensitivity as a qPCR assay. The performance of the CPA assay was also evaluated with 100 stool specimens from diarrhoea patients and 40 environmental water samples. In conclusion, the simplicity, cost-effectiveness and nearly instrument-free platform of the CPA assay make it practical for use in primary care facilities and smaller clinical laboratories. Aeromonas hydrophila is a human pathogen that infects via exposed wounds or ingestion of contaminated water and food. In this study, a CPA-based PCR method was developed for specific, rapid, cost-effective detection of Aer. hydrophila, and the test results could be visualized without opening the reaction tubes. This is the first report on the application of the CPA method for the detection of Aer. hydrophila. This novel method could be practical for use in primary care facilities and smaller clinical laboratories. © 2015 The Society for Applied Microbiology.

  11. Development and testing of a rapid diagnostic test for bubonic and pneumonic plague.

    Science.gov (United States)

    Chanteau, Suzanne; Rahalison, Lila; Ralafiarisoa, Lalao; Foulon, Jeanine; Ratsitorahina, Mahery; Ratsifasoamanana, Lala; Carniel, Elisabeth; Nato, Farida

    2003-01-18

    Plague is often fatal without prompt and appropriate treatment. It affects mainly poor and remote populations. Late diagnosis is one of the major causes of human death and spread of the disease, since it limits the effectiveness of control measures. We aimed to develop and assess a rapid diagnostic test (RDT) for plague. We developed a test that used monoclonal antibodies to the F1 antigen of Yersinia pestis. Sensitivity and specificity were assessed with a range of bacterial cultures and clinical samples, and compared with findings from available ELISA and bacteriological tests for plague. Samples from patients thought to have plague were tested with the RDT in the laboratory and by health workers in 26 pilot sites in Madagascar. The RDT detected concentrations of F1 antigen as low as 0.5 ng/mL in up to 15 min, and had a shelf life of 21 days at 60 degrees C. Its sensitivity and specificity were both 100%. RDT detected 41.6% and 31% more positive clinical specimens than did bacteriological methods and ELISA, respectively. The agreement rate between tests done at remote centres and in the laboratory was 89.8%. With the combination of bacteriological methods and F1 ELISA as reference standard, the positive and negative predictive values of the RDT were 90.6% and 86.7%, respectively. Our RDT is a specific, sensitive, and reliable test that can easily be done by health workers at the patient's bedside, for the rapid diagnosis of pneumonic and bubonic plague. This test will be of key importance for the control of plague in endemic countries.

  12. Using aerial photography to estimate riparian zone impacts in a rapidly developing river corridor.

    Science.gov (United States)

    Owers, Katharine A; Albanese, Brett; Litts, Thomas

    2012-03-01

    Riparian zones are critical for protecting water quality and wildlife, but are often impacted by human activities. Ongoing threats and uncertainty about the effectiveness of buffer regulations emphasize the importance of monitoring riparian buffers through time. We developed a method to rapidly categorize buffer width and landuse attributes using 2007 leaf-on aerial photography and applied it to a 65 km section of the Toccoa River in north Georgia. We repeated our protocol using 1999 leaf-off aerial photographs to assess the utility of our approach for monitoring. Almost half (45%) of the length of the Toccoa River was bordered by buffers less than 50 ft wide in 2007, with agricultural and built-up lands having the smallest buffers. The percentage of river length in each buffer width category changed little between 1999 and 2007, but we did detect a 5% decrease in agricultural land use, a corresponding increase in built-up land use, and an additional 149 buildings within 100 ft of the river. Field verification indicated that our method overestimated buffer widths and forested land use and underestimated built-up land use and the number of buildings within 100 ft of the river. Our methodology can be used to rapidly assess the status of riparian buffers. Including supplemental data (e.g., leaf-off imagery, road layers) will allow detection of the fine-scale impacts underestimated in our study. Our results on the Toccoa River reflect historic impacts, exemptions and variances to regulations, and the ongoing threat of vacation home development. We recommend additional monitoring, improvements in policy, and efforts to increase voluntary protection and restoration of stream buffers.

  13. Energy development in the US Rockies: A Role for counties?

    Energy Technology Data Exchange (ETDEWEB)

    Davis, C.; Hoffer, K. [Colorado State University, Fort Collins, CO (United States)

    2010-04-01

    This article analyzes the role played by county commissioners in Colorado and Montana in restricting or facilitating the use of clean energy sources in the generation of electrical power. Using data obtained from responses to an internet survey, we found that many commissioners in both states developed land use policies dealing with renewable energy resources over the preceding five years. Colorado and Montana officials were quite similar in terms of their positive reaction to changes that would facilitate greater county interest in clean energy policies. Most respondents favored increasing the pace of renewable energy use in relation to traditional energy sources but were also supportive of a more inclusive renewable portfolio standard that would embrace clean coal technologies and nuclear power.

  14. Understanding energy technology developments from an innovation system perspective

    Energy Technology Data Exchange (ETDEWEB)

    Borup, M.; Nygaard Madsen, A. [Risoe National Lab., DTU, Systems Analysis Dept., Roskilde (Denmark); Gregersen, Birgitte [Aalborg Univ., Department of Business Studies (Denmark)

    2007-05-15

    With the increased market-orientation and privatisation of the energy area, the perspective of innovation is becoming more and more relevant for understanding the dynamics of change and technology development in the area. A better understanding of the systemic and complex processes of innovation is needed. This paper presents an innovation systems analysis of new and emerging energy technologies in Denmark. The study focuses on five technology areas: bio fuels, hydrogen technology, wind energy, solar cells and energy-efficient end-use technologies. The main result of the analysis is that the technology areas are quite diverse in a number of innovation-relevant issues like actor set-up, institutional structure, maturity, and connections between market and non-market aspects. The paper constitutes background for discussing the framework conditions for transition to sustainable energy technologies and strengths and weaknesses of the innovation systems. (au)

  15. Path dependence in energy systems and economic development

    Science.gov (United States)

    Fouquet, Roger

    2016-08-01

    Energy systems are subject to strong and long-lived path dependence, owing to technological, infrastructural, institutional and behavioural lock-ins. Yet, with the prospect of providing accessible cheap energy to stimulate economic development and reduce poverty, governments often invest in large engineering projects and subsidy policies. Here, I argue that while these may achieve their objectives, they risk locking their economies onto energy-intensive pathways. Thus, particularly when economies are industrializing, and their energy systems are being transformed and are not yet fully locked-in, policymakers should take care before directing their economies onto energy-intensive pathways that are likely to be detrimental to their long-run prosperity.

  16. Financing Opportunities for Renewable Energy Development in Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Ardani, K.; Hillman, D.; Busche, S.

    2013-04-01

    This technical report provides an overview of existing and potential financing structures for renewable energy project development in Alaska with a focus on four primary sources of project funding: government financed or supported (the most commonly used structure in Alaska today), developer equity capital, commercial debt, and third-party tax-equity investment. While privately funded options currently have limited application in Alaska, their implementation is theoretically possible based on successful execution in similar circumstances elsewhere. This report concludes that while tax status is a key consideration in determining appropriate financing structure, there are opportunities for both taxable and tax-exempt entities to participate in renewable energy project development.

  17. Small hydropower projects and sustainable energy development in Sri Lanka

    Energy Technology Data Exchange (ETDEWEB)

    Morimoto, R.; Munasinghe, M. [Cambridge Univ. (United Kingdom); Munasinghe Inst. for Development, Colombo (Sri Lanka); Yale Univ., New Haven, CT (United States)

    2005-07-01

    Sustainable development has evolved to encompass three major viewpoints: economic, social and environmental. Given the wide-ranging potential impacts of energy on national sustainable development, we review the linkages between these two topics. In the Sri Lanka case study presented here, the Sustainomics framework is used to assess the role of small hydroelectric power projects in sustainable energy development. Key variables represent economic, social and environmental dimensions. This analysis helps policy-makers compare and rank project alternatives more easily and effectively. The multi-dimensional analysis, which includes environmental and social variables, supplements the more conventional cost benefit analysis based on economic values alone. (Author)

  18. Balancing energy and the environment: the case of geothermal development

    Energy Technology Data Exchange (ETDEWEB)

    Ellickson, P.L.; Brewer, S.

    1978-06-01

    The results of part of a Rand study on the federal role in resolving environmental issues arising out of the implementation of energy projects are reported. The projects discussed are two geothermal programs in California: the steam resource development at The Geysers (Lake and Sonoma counties) in northern California, and the wet brine development in the Imperial Valley in southern California.

  19. Rapid-X - An FPGA Development Toolset Using a Custom Simulink Library for MTCA.4 Modules

    Science.gov (United States)

    Prędki, Paweł; Heuer, Michael; Butkowski, Łukasz; Przygoda, Konrad; Schlarb, Holger; Napieralski, Andrzej

    2015-06-01

    The recent introduction of advanced hardware architectures such as the Micro Telecommunications Computing Architecture (MTCA) caused a change in the approach to implementation of control schemes in many fields. The development has been moving away from traditional programming languages ( C/C++), to hardware description languages (VHDL, Verilog), which are used in FPGA development. With MATLAB/Simulink it is possible to describe complex systems with block diagrams and simulate their behavior. Those diagrams are then used by the HDL experts to implement exactly the required functionality in hardware. Both the porting of existing applications and adaptation of new ones require a lot of development time from them. To solve this, Xilinx System Generator, a toolbox for MATLAB/Simulink, allows rapid prototyping of those block diagrams using hardware modelling. It is still up to the firmware developer to merge this structure with the hardware-dependent HDL project. This prevents the application engineer from quickly verifying the proposed schemes in real hardware. The framework described in this article overcomes these challenges, offering a hardware-independent library of components that can be used in Simulink/System Generator models. The components are subsequently translated into VHDL entities and integrated with a pre-prepared VHDL project template. Furthermore, the entire implementation process is run in the background, giving the user an almost one-click path from control scheme modelling and simulation to bit-file generation. This approach allows the application engineers to quickly develop new schemes and test them in real hardware environment. The applications may range from simple data logging or signal generation ones to very advanced controllers. Taking advantage of the Simulink simulation capabilities and user-friendly hardware implementation routines, the framework significantly decreases the development time of FPGA-based applications.

  20. The development of empirical models to evaluate energy use and energy cost in wastewater collection

    Science.gov (United States)

    Young, David Morgan

    This research introduces a unique data analysis method and develops empirical models to evaluate energy use and energy cost in wastewater collection systems using operational variables. From these models, several Best Management Processes (BMPs) are identified that should benefit utilities and positively impact the operation of existing infrastructure as well as the design of new infrastructure. Further, the conclusions generated herein display high transferability to certain manufacturing processes. Therefore, it is anticipated that these findings will also benefit pumping applications outside of the water sector. Wastewater treatment is often the single largest expense at the local government level. Not surprisingly, significant research effort has been expended on examining the energy used in wastewater treatment. However, the energy used in wastewater collection systems remains underexplored despite significant potential for energy savings. Estimates place potential energy savings as high as 60% within wastewater collection; which, if applied across the United States equates to the energy used by nearly 125,000 American homes. Employing three years of data from Renewable Water Resources (ReWa), the largest wastewater utility in the Upstate of South Carolina, this study aims to develop useful empirical equations that will allow utilities to efficiently evaluate the energy use and energy cost of its wastewater collection system. ReWa's participation was motivated, in part, by their recent adoption of the United States Environmental Protection Agency "Effective Utility Strategies" within which exists a focus on energy management. The study presented herein identifies two primary variables related to the energy use and cost associated with wastewater collection: Specific Energy (Es) and Specific Cost (Cs). These two variables were found to rely primarily on the volume pumped by the individual pump stations and exhibited similar power functions for the three year

  1. Consumption of energy drinks by children and young people: a rapid review examining evidence of physical effects and consumer attitudes.

    Science.gov (United States)

    Visram, Shelina; Cheetham, Mandy; Riby, Deborah M; Crossley, Stephen J; Lake, Amelia A

    2016-10-08

    To examine patterns of energy drink consumption by children and young people, attitudes towards these drinks, and any associations with health or other outcomes. Rapid evidence assessment and narrative synthesis. 9 electronic bibliographic databases, reference lists of relevant studies and searches of the internet. A total of 410 studies were located, with 46 meeting the inclusion criteria. The majority employed a cross-sectional design, involved participants aged 11-18 years, and were conducted in North America or Europe. Consumption of energy drinks by children and young people was found to be patterned by gender, with boys consuming more than girls, and also by activity levels, with the highest consumption observed in the most and least sedentary individuals. Several studies identified a strong, positive association between the use of energy drinks and higher odds of health-damaging behaviours, as well as physical health symptoms such as headaches, stomach aches, hyperactivity and insomnia. There was some evidence of a dose-response effect. 2 experimental studies involving small numbers of junior athletes demonstrated a positive impact on limited aspects of sports performance. 3 themes emerged from the qualitative studies: reasons for use; influences on use; and perceived efficacy and impact. Taste and energy-seeking were identified as key drivers, and branding and marketing were highlighted as major influences on young people's consumption choices. Awareness of possible negative effects was low. There is growing evidence that consumption of energy drinks is associated with a range of adverse outcomes and risk behaviours in terms of children's health and well-being. However, taste, brand loyalty and perceived positive effects combine to ensure their popularity with young consumers. More research is needed to explore the short-term and long-term impacts in all spheres, including health, behaviour and education. CRD42014010192. Published by the BMJ Publishing

  2. Sustainable development, energy and climate. Exploring synergies and tradeoffs

    Energy Technology Data Exchange (ETDEWEB)

    Halsnaes, K.; Garg, A. (eds.)

    2006-11-15

    This report summarizes the results of the Development, Energy and Climate Project that has been managed by the UNEP Risoe Centre on behalf of UNEP DTIE. The project is a partnership between the UNEP Risoe Centre and centers of excellence in Bangladesh, Brazil, China, India, Senegal and South Africa. The focus of this report is on the energy sector mitigation assessments that have been carried out in the countries. In addition to this work, the project has also included adaptation focused case studies that explore climate change impacts on the energy sector and infrastructure. The report includes a short introduction to the project and its approach and summaries of the six country studies. This is followed by an assessment of cross country results that gives a range of key indicators of the relationship between economic growth, energy, and local and global pollutants. Furthermore, energy access and affordability for households are considered as major social aspects of energy provision. The country study results that are included in this report are a short summary of some of the main findings and do not provide all details of the work that has been undertaken. Some of the countries in particular those with fast growing economies and energy sectors such as Brazil, China, India and South Africa have conducted general scenario analysis of the energy sector and explored some policies in more depth, while the country studies for Bangladesh and Senegal where the energy sector is less developed have focused more on specific issues related to energy access and the electricity sector. (au)

  3. Energy Efficient Urban Development Portfolio; Portfolio Energiezuinige Stedenbouw

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-10-15

    Within 10 years' time, all new buildings in the Netherlands will be built energy-neutrally. This has been agreed on in the Spring Agreement. To reach the goal of energy-neutral building, urban development adjustments are needed. This portfolio offers instruments to work with the theme of energy in urban development plans, including 10 appealing examples of projects. [Dutch] Binnen tien jaar worden in Nederland alle nieuwbouwwoningen energieneutraal gebouwd. Hier zijn afspraken over gemaakt in onder andere het Lente-akkoord. Om het doel van energieneutrale bouw te bereiken zijn ook stedenbouwkundige aanpassingen noodzakelijk. Dit portfolio geeft handvatten om met het thema energie in stedenbouwkundige plannen te werken met tien aansprekende projecten als voorbeelden.

  4. AIBench: a rapid application development framework for translational research in biomedicine.

    Science.gov (United States)

    Glez-Peña, D; Reboiro-Jato, M; Maia, P; Rocha, M; Díaz, F; Fdez-Riverola, F

    2010-05-01

    Applied research in both biomedical discovery and translational medicine today often requires the rapid development of fully featured applications containing both advanced and specific functionalities, for real use in practice. In this context, new tools are demanded that allow for efficient generation, deployment and reutilization of such biomedical applications as well as their associated functionalities. In this context this paper presents AIBench, an open-source Java desktop application framework for scientific software development with the goal of providing support to both fundamental and applied research in the domain of translational biomedicine. AIBench incorporates a powerful plug-in engine, a flexible scripting platform and takes advantage of Java annotations, reflection and various design principles in order to make it easy to use, lightweight and non-intrusive. By following a basic input-processing-output life cycle, it is possible to fully develop multiplatform applications using only three types of concepts: operations, data-types and views. The framework automatically provides functionalities that are present in a typical scientific application including user parameter definition, logging facilities, multi-threading execution, experiment repeatability and user interface workflow management, among others. The proposed framework architecture defines a reusable component model which also allows assembling new applications by the reuse of libraries from past projects or third-party software. Copyright (c) 2009 Elsevier Ireland Ltd. All rights reserved.

  5. Isolation, amplification and characterization of foodborne pathogen disease bacteria gene for rapid kit test development

    Science.gov (United States)

    Nurjayadi, M.; Santoso, I.; Kartika, I. R.; Kurniadewi, F.; Saamia, V.; Sofihan, W.; Nurkhasanah, D.

    2017-07-01

    There is a lot of public concern over food safety. Food-safety cases recently, including many food poisoning cases in both the developed and developing countries, considered to be the national security threats which involved police investigation. Quick and accurate detection methods are needed to handle the food poisoning cases with a big number of sufferers at the same time. Therefore, the research is aimed to develop a specific, sensitive, and rapid result molecular detection tool for foodborne pathogen bacteria. We, thus, propose genomic level approach with Polymerase Chain Reaction. The research has successfully produced a specific primer to perform amplification to fim-C S. typhi, E. coli, and pef Salmonella typhimurium genes. The electrophoresis result shows that amplification products are 95 base pairs, 121 base pairs, and 139 base pairs; and all three genes are in accordance with the size of the in silico to third genes bacteria. In conclusion, the research has been successfully designed a specific detection tool to three foodborne pathogen bacteria genes. Further stages test and the uses of Real-time PCR in the detection are still in the trial process for better detection method.

  6. Evaluation of Proteus as a Tool for the Rapid Development of Models of Hydrologic Systems

    Science.gov (United States)

    Weigand, T. M.; Farthing, M. W.; Kees, C. E.; Miller, C. T.

    2013-12-01

    Models of modern hydrologic systems can be complex and involve a variety of operators with varying character. The goal is to implement approximations of such models that are both efficient for the developer and computationally efficient, which is a set of naturally competing objectives. Proteus is a Python-based toolbox that supports prototyping of model formulations as well as a wide variety of modern numerical methods and parallel computing. We used Proteus to develop numerical approximations for three models: Richards' equation, a brine flow model derived using the Thermodynamically Constrained Averaging Theory (TCAT), and a multiphase TCAT-based tumor growth model. For Richards' equation, we investigated discontinuous Galerkin solutions with higher order time integration based on the backward difference formulas. The TCAT brine flow model was implemented using Proteus and a variety of numerical methods were compared to hand coded solutions. Finally, an existing tumor growth model was implemented in Proteus to introduce more advanced numerics and allow the code to be run in parallel. From these three example models, Proteus was found to be an attractive open-source option for rapidly developing high quality code for solving existing and evolving computational science models.

  7. Late winter feeding stimulates rapid spring development of carniolan honey bee colonies (Apis mellifera carnica

    Directory of Open Access Journals (Sweden)

    Zlatko Puškadija

    2017-01-01

    Full Text Available Unfavourable weather conditions after the queen starts with intensive oviposition during early spring may cause an imbalance in the division of tasks among worker bees in the bee colony. This can lead to slow spring development and poor exploitation of the main spring nectar flows. In order to accelerate the spring development, it is necessary, as a technological measure, to feed supplemental candy to bee colonies. In this research, the necessity of supplemental feeding, as well as the composition of candy (pollen and protein substitute were analysed. Three groups of ten bee colonies each were formed - the control, unfed group, pollen candy fed and protein substitute candy fed. In the period from 22/02/2016 and 04/04/2016 three control measurements were performed during which the number of bees, the number of brood cells and weight of the bee colonies were determined. The research has shown that supplemental feeding of the bee colony in late winter in order to encourage the rapid spring development is justified. Namely, at the final measurements in April, the results showed differences between groups. The treated colonies had higher net hive weight, a greater number of bees and statistically significantly more brood cells. The results of this study confirm that the technological measure of supplemental feeding in late winter should be performed on all commercial apiaries for the production of honey, pollen, royal jelly, queen bees and bee venom.

  8. Overcoming challenges to initiating cell therapy clinical trials in rapidly developing countries: India as a model.

    Science.gov (United States)

    Viswanathan, Sowmya; Rao, Mahendra; Keating, Armand; Srivastava, Alok

    2013-08-01

    Increasingly, a number of rapidly developing countries, including India, China, Brazil, and others, are becoming global hot spots for the development of regenerative medicine applications, including stem cell-based therapies. Identifying and overcoming regulatory and translational research challenges and promoting scientific and ethical clinical trials with cells will help curb the growth of stem cell tourism for unproven therapies. It will also enable academic investigators, local regulators, and national and international biotechnology and biopharmaceutical companies to accelerate stem cell-based clinical research that could lead to effective innovative treatments in these regions. Using India as a model system and obtaining input from regulators, clinicians, academics, and industry representatives across the stem cell field in India, we reviewed the role of key agencies and processes involved in this field. We have identified areas that need attention and here provide solutions from other established and functioning models in the world to streamline and unify the regulatory and ethics approval processes for cell-based therapies. We also make recommendations to check the growth and functioning of clinics offering unproven treatments. Addressing these issues will remove considerable hurdles to both local and international investigators, accelerate the pace of research and development, and create a quality environment for reliable products to emerge. By doing so, these countries would have taken one important step to move to the forefront of stem cell-based therapeutics.

  9. Wind energy development as a part of Poland’s industrial development

    Directory of Open Access Journals (Sweden)

    Stoerring Dagmara

    2007-01-01

    Full Text Available Poland as an European Union (EU member state has to increase its share of renewable energy (RE in gross domestic energy consumption from 2.4% in 2003 to 12% in 2010. This paper discusses perspectives for wind energy development in Poland as a part of the industrial development given the political system supports RE. It shows that the fulfillment of the EU’s RE obligations could be used to the advantage of Poland’s sustainable development. Wind energy development may create a new industry that involves spare capacity of traditional Polish industries and generates new work places. This may help to overcome Poland’s main macro-economical problems: high unemployment and budget deficit. This paper concludes with recommendations on how to make wind energy development a part of the industrial development in Poland by introducing RE support mechanisms to improve the conditions for companies to develop wind technology in Poland. .

  10. Renewable Energy Development on Fort Mojave Reservation Feasiblity Study

    Energy Technology Data Exchange (ETDEWEB)

    Russell Gum, ERCC analytics LLC

    2008-03-17

    The Ft. Mojave tribe, whose reservation is located along the Colorado River in the states of Arizona, California, and Nevada near the point where all three states meet, has a need for increased energy supplies. This need is a direct result of the aggressive and successful economic development projects undertaken by the tribe in the last decade. While it is possible to contract for additional energy supplies from fossil fuel sources it was the desire of the tribal power company, AHA MACAV Power Service (AMPS) to investigate the feasibility and desirability of producing power from renewable sources as an alternative to increased purchase of fossil fuel generated power and as a possible enterprise to export green power. Renewable energy generated on the reservation would serve to reduce the energy dependence of the tribal enterprises on off reservation sources of energy and if produced in excess of reservation needs, add a new enterprise to the current mix of economic activities on the reservation. Renewable energy development would also demonstrate the tribe’s support for improving environmental quality, sustainability, and energy independence both on the reservation and for the larger community.

  11. Geothermal energy in Alaska: site data base and development status

    Energy Technology Data Exchange (ETDEWEB)

    Markle, D.

    1979-04-01

    The following are presented: the history of geothermal energy in Alaska; a history of Alaska land ownership; legal and institutional barriers; and economics. Development, the socio-economic and physical data concerning geothermal energy are documented by regions. The six regions presented are those of the present Alaska State Planning Activities and those of the Federal Land Use Commission. Site data summaries of the one hundred and four separate geothermal spring locations are presented by these regions. (MHR)

  12. Regency Centers Develops Leadership in Energy-Efficient Renovations

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2013-03-01

    Regency Centers (Regency) partnered with the Department of Energy (DOE) to develop and implement solutions to retrofit existing buildings to reduce energy consumption by at least 30% versus requirements set by Standard 90.1-2004 of the American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ASHRAE), the American National Standards Institute (ANSI), and the Illuminating Engineering Society of North America (IESNA) as part of DOE’s Commercial Building Partnerships (CBP) Program.

  13. Cogeneration – development and prospect in Polish energy sector

    Directory of Open Access Journals (Sweden)

    Matuszewska Dominika

    2017-01-01

    Full Text Available Next 10-15 years are crucial for condition of Polish energy sector in light of challenges arising mainly from increasing demand for electric energy, need of reducing greenhouse gases emissions and shutdowns of old units. In this situation cogeneration can be one of the most rational way to meet those circumstances. This paper analyzes present development of cogeneration in Poland and its prospect for future.

  14. Energy price increases and economic development in Malaysia.

    OpenAIRE

    Fong CO

    1984-01-01

    ILO pub-WEP pub. Working paper on the impact of higher energy costs (particularly petroleum price increases) on economic development in Malaysia, 1973 to 1983 - outlines trends in gross domestic product, balance of payments, trade and economic growth; considers household income and fuel expenditure of low income rural communitys; deals with choice of technology and employment in certain high power consumption industries; discusses energy policy implications. Graphs, maps, questionnaires, refe...

  15. Brain energy metabolism: development and application of novel live methodologies

    OpenAIRE

    Bennett, Rachel

    2012-01-01

    This thesis investigates methods of studying brain energy metabolism with a specific focus on the substrates oxygen and glucose. It details the in vitro development and in vivo characterisation of microelectrochemical sensors for the detection of brain tissue oxygen, and the in vivo characterisation of oxygen and glucose electrodes in the hippocampus utilising the technique of long-term in vivo electrochemistry (LIVE). Chapter 1 introduces the brain, energy metabolism and neurochemical ana...

  16. WEO-2006 Fact Sheet: Energy for Cooking in Developing Countries

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Bringing modern energy to the world's poor is an urgent necessity. Although steady progress is made in expanding the use of modern household energy services in developing countries, in both scenarios many people still depend on traditional biomass in 2030. Action to encourage more efficient and sustainable use of traditional biomass and help people switch to modern cooking fuels and technologies is therefore urgent.

  17. New Systems Thinking and Policy Means for Sustainable Energy Development

    DEFF Research Database (Denmark)

    Meyer, Niels I.

    2011-01-01

    Sustainable energy development requires attention to both the demand and supply side. On the demand side there is an urgent need for efficient policy means promoting energy conservation. This includes changes in the institutional and economic framework to compensate for the short comings...... of the dominating neoclassical economy and the short time horizon of the present market system. On the supply side fossil fuels are becoming a central problem being the dominating global energy source while at the same time presenting serious problems in relation to global warming and limited resources (“peak oil...

  18. New Systems Thinking and Policy Means for Sustainable Energy Development

    DEFF Research Database (Denmark)

    Meyer, Niels I

    2010-01-01

    Sustainable energy development requires attention to both the demand and supply side. On the demand side there is an urgent need for efficient policy means promoting energy conservation. This includes changes in the institutional and economic framework to compensate for the short comings...... of the dominating neoclassical economy and the short time horizon of the present market system. On the supply side fossil fuels are becoming a central problem being the dominating global energy source while at the same time presenting serious problems in relation to global warming and limited resources (“peak oil...

  19. Developing an energy design tool: Phase 1 report

    Energy Technology Data Exchange (ETDEWEB)

    Heidell, J.A.; Deringer, J.D.

    1987-02-01

    This report documents the planning phase of a proposed four-phase project for creating computer software to provide energy expertise in a manageable form to architects and engineers - thereby decreasing energy use in new buildings. The government sponsored software would be integrated with commercially developed software for use in the design of buildings. The result would be an integrated software package to aid the designer in the building design process and to provide expert insight into the energy related implications of a proposed design.

  20. Assessing the role of energy in development and climate policies in large developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Garg, A.; Halsnaes, K. [UNEP Risoe Centre (Denmark)

    2007-05-15

    The paper discusses a number of key conceptual issues related to the role of energy in development and its potential synergies and tradeoffs with climate change. The relationship between economic development and energy over time is discussed and illustrated by data from Brazil, China, India and South Africa. It is concluded that energy plays an important role as a productivity enhancing factor in economic development and in human well being and several policy goals related to sustainable development (SD), energy and climate can be integrated. However, meeting all these policy goals requires a special effort and can imply costs. An analytical approach that can be used to assess development, energy and climate policies is introduced and empirical indicators of Sustainable development trends for the period 2000-2030 are presented. In a pragmatic way, it is proposed to use indicators of economic, social, and environmental SD dimensions such as costs, employment generation, energy access, local and global emissions, income distribution, and local participation in the evaluation of specific policies. The approach is developed and tested as part of the Development, Energy, and Climate project which is international project cooperation between the UNEP Risoe Centre and teams in Brazil, China, India and South Africa. The results demonstrate that there is a huge potential for energy efficiency improvements in the energy systems in these countries and thereby cost savings and reduced emissions intensity. However, the implied greenhouse gas emissions depend on fuel and technology compositions and reduction will imply that specific policies are put in place. (au)

  1. Optimal energy options under Clean Development Mechanism: Renewable energy projects for sustainable development and carbon emission reduction

    Science.gov (United States)

    Gilau, Asmerom M.

    This dissertation addresses two distinct objectives; designing cost-effective renewable energy powered projects including seawater reverse osmosis (SWRO), aquaculture, and ice-making plant, and analyzing the cost-effectiveness of these projects in achieving low abatement costs and promoting sustainable developments under the Clean Development Mechanism. The results of SWRO analysis show that a wind powered system is the least expensive and a PV powered system the most expensive, with finished water costs of about 0.50 /m3 and 1.00 /m3, respectively. By international standards, these costs are competitive. The results of renewable energy powered commercial tilapia production indicate that a wind-diesel system has high potential for intensive tilapia production as well as carbon dioxide emission reductions. The study also investigates aeration failures in renewable energy powered tilapia production systems. With respect to the ice-making plant, unlike previous studies which consider nighttime operation only, we have found that a nighttime PV powered ice-making system is more expensive (1/kWh) than daytime ice-making system (0.70/kWh). Our optimal energy options analysis at project scale which includes SWRO, ice-making plant and household energy consumption for about 100 households shows that compared to diesel only energy option, PV-D, W-D, and PV-W-D hybrids are very cost-effective energy options. Moreover, energy options with high levels of renewable energy including 100% renewables have the lowest net present cost and they are already cost-effective without CDM. On the other hand, while the removal of about 87% carbon dioxide emissions could be achieved at negative cost, initial investment could increase by a factor of 40, which is one of the primary barriers hindering wider renewable energy applications in developing countries. Thus in order to increase developing countries' participation in the carbon market, CDM policy should shift from a purely market oriented

  2. Developing Energy Technology Course for Undergraduate Engineering Management Study Program in Lake Toba Area with Particular Focus to Sustainable Energy Systems in Development Context

    Science.gov (United States)

    Manik, Yosef; Sinaga, Rizal; Saragi, Hadi

    2018-02-01

    Undergraduate Engineering Management Study Program of Institut Teknologi Del is one of the pioneers for its field in Indonesia. Located in Lake Toba Area, this study program has a mission to provide high quality Engineering Management education that produces globally competitive graduates who in turn will contribute to local development. Framing the Energy Technology course—one of the core subjects in Engineering Management Body of Knowledge—in the context of sustainable development of Lake Toba Area is very essential. Thus, one particular focus in this course is sustainable energy systems in local development context that incorporates identification and analysis of locally available energy resources. In this paper we present our experience in designing such course. In this work, we introduce the domains that shape the Engineering Management Body of Knowledge. Then, we explain the results of our evaluation on the key considerations to meet the rapidly changing needs of society in local context. Later, we present the framework of the learning outcomes and the syllabus as a result of mapping the road map with the requirement. At the end, the summary from the first two semesters of delivering this course in academic year 2015/2016 and 2016/2017 are reported.

  3. Energy needs, uses, and resources in developing countries

    Energy Technology Data Exchange (ETDEWEB)

    Palmedo, P.F.; Nathans, R.; Beardsworth, E.; Hale, S. Jr.

    1978-03-01

    The report identifies the energy needs, uses, and resources in the developing countries of the world and examines the energy options available to them for their continued social and economic growth. If traditional patterns of development are to continue, oil consumption in the non-OPEC LDCs will grow steadily to become comparable with current U.S. consumption between 2000 and 2020. Attempts to exploit indigenous hydrocarbon resources even in those LDCs with untapped reserves will be limited by shortages of capital and technical manpower. In the absence of major actions to replace noncommercial fuels or to increase the effectiveness with which they are used, a large fraction of the 3 to 4 billion LDC rural population in the year 2000 will not be able to raise their energy usage above subsistence levels. There is a wide variety of solutions to these problems, many of them emerging directly from the changed economics of energy. For example, most LDCs have not adequately explored and developed their own indigenous resources; in virtually all energy conversion and utilization processes there are opportunities for improvements in efficiency and substitution of renewable energy forms. In virtually all these areas there are opportunities for effective assistance activities.

  4. ROMANIA'S ENERGY POTENTIAL OF RENEWABLE ENERGIES IN THE CONTEXT OF SUSTAINABLE DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Maghear Diana

    2011-12-01

    Full Text Available The concept of 'sustainable development' and the necessity for its realization has gone a long way in order to be unanimously accepted. Over time many authors have written about the problem regarding resources depletion, about the effects of pollution and their economic, ecological and social aspects of it. From the observation of the pollution phenomenon and its implications and until this problem has been acknowledged and accepted by a large number of people this problem has been extensively described by various authors be they economists, ecologists, biologists or psychologists and discussed at multiple conferences conducted in order to find a solution to this problem. In the last century, the use of fossil fuels (coal, gas, oil has had disastrous effects, catastrophic even on the environment, greater than any human activity in history. Among these effects we can enumerate: global warming, the emergence of acid rains, thinning of the ozone layer, etc. In consequence, the use of alternative energy resources becomes imminent for the today world. Among these resources we can include the sun, the wind, geothermal water, biomass, water, etc., which have the capacity to generate alternative energy namely solar energy, wind energy, hydro energy, wave energy, geothermal energy, bioenergy (biofuels, biodiesel, etc. that have the as purpose the reduction of the thermal, radioactive and chemical pollution anywhere on the globe. Renewable energy sources are largely indigenous; they are not based on the future availability of conventional sources of energy, and natural or predominantly decentralized makes that the respective economy to be less vulnerable in front of the supply with volatile energy. Therefore, they constitute a key element of a sustainable energy future. This paper is meant to highlight the need for achieving a sustainable development both in terms of the problem that humanity faces which threatens the entire ecosystem and namely the

  5. Anemia management: development of a rapid-access anemia and intravenous iron service

    Directory of Open Access Journals (Sweden)

    Radia D

    2013-08-01

    Full Text Available Deepti Radia,1 Ibrahim Momoh,2 Richard Dillon,1 Yvonne Francis,1 Laura Cameron,1 Toni-Lee Fagg,1 Hannah Overland,1 Susan Robinson,1 Claire N Harrison11Haematology Department, Guy's and St Thomas' NHS Foundation Trust, London, UK; 2Bupa Home Healthcare, Harlow, UKAbstract: This article describes the initiation and evolution of the Rapid-Access Anemia Clinic (RAAC at Guy's and St Thomas' Hospitals, London, UK. This clinic was set up to provide diagnosis and treatment, and to coordinate investigative procedures, where necessary, into the underlying causes of anemia. Initially piloted with anemic preoperative orthopedic patients, the clinic now treats a wide range of conditions, deriving from both internal and external referrals. Treatment includes dietary advice, supplementation with iron, vitamin B12 and folate, and blood transfusion. Most patients at the RAAC need iron replacement, the majority of which require intravenous (IV iron. Therefore the first-line IV iron-administration protocol is carefully considered to ensure viability of the service and patient satisfaction. Four IV irons available in the UK are discussed, with explanation of the benefits and drawbacks of each product and the reasoning behind the IV iron choice at different stages of the RAAC's development. Costs to the service, affected by IV iron price and administration regimen, are considered, as well as the product's contraindications. Finally, the authors reflect on the success of the RAAC and how it has improved patients' quality-of-treatment experience, in addition to benefiting the hospital and National Health Service in achieving specific health-care mandates and directives. Drawing from the authors' experiences, recommendations are given to assist others in setting up and providing a successful rapid-access anemia service or similar facility.Keywords: hemoglobin, iron deficiency, ferric carboxymaltose, iron sucrose, iron dextran, iron isomaltoside

  6. Evaluation of nine HIV rapid test kits to develop a national HIV testing algorithm in Nigeria

    Directory of Open Access Journals (Sweden)

    Orji Bassey

    2015-05-01

    Full Text Available Background: Non-cold chain-dependent HIV rapid testing has been adopted in many resource-constrained nations as a strategy for reaching out to populations. HIV rapid test kits (RTKs have the advantage of ease of use, low operational cost and short turnaround times. Before 2005, different RTKs had been used in Nigeria without formal evaluation. Between 2005 and 2007, a study was conducted to formally evaluate a number of RTKs and construct HIV testing algorithms. Objectives: The objectives of this study were to assess and select HIV RTKs and develop national testing algorithms. Method: Nine RTKs were evaluated using 528 well-characterised plasma samples. These comprised 198 HIV-positive specimens (37.5% and 330 HIV-negative specimens (62.5%, collected nationally. Sensitivity and specificity were calculated with 95% confidence intervals for all nine RTKs singly and for serial and parallel combinations of six RTKs; and relative costs were estimated. Results: Six of the nine RTKs met the selection criteria, including minimum sensitivity and specificity (both ≥ 99.0% requirements. There were no significant differences in sensitivities or specificities of RTKs in the serial and parallel algorithms, but the cost of RTKs in parallel algorithms was twice that in serial algorithms. Consequently, three serial algorithms, comprising four test kits (BundiTM, DetermineTM, Stat-Pak® and Uni-GoldTM with 100.0% sensitivity and 99.1% – 100.0% specificity, were recommended and adopted as national interim testing algorithms in 2007. Conclusion: This evaluation provides the first evidence for reliable combinations of RTKs for HIV testing in Nigeria. However, these RTKs need further evaluation in the field (Phase II to re-validate their performance.

  7. Development of Rapid Detection and Genetic Characterization of Salmonella in Poultry Breeder Feeds

    Directory of Open Access Journals (Sweden)

    Steven C. Ricke

    2009-07-01

    Full Text Available Salmonella is a leading cause of foodborne illness in the United States, with poultry and poultry products being a primary source of infection to humans. Poultry may carry some Salmonella serovars without any signs or symptoms of disease and without causing any adverse effects to the health of the bird. Salmonella may be introduced to a flock by multiple environmental sources, but poultry feed is suspected to be a leading source. Detecting Salmonella in feed can be challenging because low levels of the bacteria may not be recovered using traditional culturing techniques. Numerous detection methodologies have been examined over the years for quantifying Salmonella in feeds and many have proven to be effective for Salmonella isolation and detection in a variety of feeds. However, given the potential need for increased detection sensitivity, molecular detection technologies may the best candidate for developing rapid sensitive methods for identifying small numbers of Salmonella in the background of large volumes of feed. Several studies have been done using polymerase chain reaction (PCR assays and commercial kits to detect Salmonella spp. in a wide variety of feed sources. In addition, DNA array technology has recently been utilized to track the dissemination of a specific Salmonella serotype in feed mills. This review will discuss the processing of feeds and potential points in the process that may introduce Salmonella contamination to the feed. Detection methods currently used and the need for advances in these methods also will be discussed. Finally, implementation of rapid detection for optimizing control methods to prevent and remove any Salmonella contamination of feeds will be considered.

  8. Development of Rapid Detection and Genetic Characterization of Salmonella in Poultry Breeder Feeds

    Science.gov (United States)

    Jarquin, Robin; Hanning, Irene; Ahn, Soohyoun; Ricke, Steven C.

    2009-01-01

    Salmonella is a leading cause of foodborne illness in the United States, with poultry and poultry products being a primary source of infection to humans. Poultry may carry some Salmonella serovars without any signs or symptoms of disease and without causing any adverse effects to the health of the bird. Salmonella may be introduced to a flock by multiple environmental sources, but poultry feed is suspected to be a leading source. Detecting Salmonella in feed can be challenging because low levels of the bacteria may not be recovered using traditional culturing techniques. Numerous detection methodologies have been examined over the years for quantifying Salmonella in feeds and many have proven to be effective for Salmonella isolation and detection in a variety of feeds. However, given the potential need for increased detection sensitivity, molecular detection technologies may the best candidate for developing rapid sensitive methods for identifying small numbers of Salmonella in the background of large volumes of feed. Several studies have been done using polymerase chain reaction (PCR) assays and commercial kits to detect Salmonella spp. in a wide variety of feed sources. In addition, DNA array technology has recently been utilized to track the dissemination of a specific Salmonella serotype in feed mills. This review will discuss the processing of feeds and potential points in the process that may introduce Salmonella contamination to the feed. Detection methods currently used and the need for advances in these methods also will be discussed. Finally, implementation of rapid detection for optimizing control methods to prevent and remove any Salmonella contamination of feeds will be considered. PMID:22346699

  9. Development and validation of a rapid, aldehyde dehydrogenase bright-based cord blood potency assay.

    Science.gov (United States)

    Shoulars, Kevin; Noldner, Pamela; Troy, Jesse D; Cheatham, Lynn; Parrish, Amanda; Page, Kristin; Gentry, Tracy; Balber, Andrew E; Kurtzberg, Joanne

    2016-05-12

    Banked, unrelated umbilical cord blood provides access to hematopoietic stem cell transplantation for patients lacking matched bone marrow donors, yet 10% to 15% of patients experience graft failure or delayed engraftment. This may be due, at least in part, to inadequate potency of the selected cord blood unit (CBU). CBU potency is typically assessed before cryopreservation, neglecting changes in potency occurring during freezing and thawing. Colony-forming units (CFUs) have been previously shown to predict CBU potency, defined as the ability to engraft in patients by day 42 posttransplant. However, the CFU assay is difficult to standardize and requires 2 weeks to perform. Consequently, we developed a rapid multiparameter flow cytometric CBU potency assay that enumerates cells expressing high levels of the enzyme aldehyde dehydrogenase (ALDH bright [ALDH(br)]), along with viable CD45(+) or CD34(+) cell content. These measurements are made on a segment that was attached to a cryopreserved CBU. We validated the assay with prespecified criteria testing accuracy, specificity, repeatability, intermediate precision, and linearity. We then prospectively examined the correlations among ALDH(br), CD34(+), and CFU content of 3908 segments over a 5-year period. ALDH(br) (r = 0.78; 95% confidence interval [CI], 0.76-0.79), but not CD34(+) (r = 0.25; 95% CI, 0.22-0.28), was strongly correlated with CFU content as well as ALDH(br) content of the CBU. These results suggest that the ALDH(br) segment assay (based on unit characteristics measured before release) is a reliable assessment of potency that allows rapid selection and release of CBUs from the cord blood bank to the transplant center for transplantation. © 2016 by The American Society of Hematology.

  10. Development and validation of a rapid, aldehyde dehydrogenase bright–based cord blood potency assay

    Science.gov (United States)

    Noldner, Pamela; Troy, Jesse D.; Cheatham, Lynn; Parrish, Amanda; Page, Kristin; Gentry, Tracy; Balber, Andrew E.; Kurtzberg, Joanne

    2016-01-01

    Banked, unrelated umbilical cord blood provides access to hematopoietic stem cell transplantation for patients lacking matched bone marrow donors, yet 10% to 15% of patients experience graft failure or delayed engraftment. This may be due, at least in part, to inadequate potency of the selected cord blood unit (CBU). CBU potency is typically assessed before cryopreservation, neglecting changes in potency occurring during freezing and thawing. Colony-forming units (CFUs) have been previously shown to predict CBU potency, defined as the ability to engraft in patients by day 42 posttransplant. However, the CFU assay is difficult to standardize and requires 2 weeks to perform. Consequently, we developed a rapid multiparameter flow cytometric CBU potency assay that enumerates cells expressing high levels of the enzyme aldehyde dehydrogenase (ALDH bright [ALDHbr]), along with viable CD45+ or CD34+ cell content. These measurements are made on a segment that was attached to a cryopreserved CBU. We validated the assay with prespecified criteria testing accuracy, specificity, repeatability, intermediate precision, and linearity. We then prospectively examined the correlations among ALDHbr, CD34+, and CFU content of 3908 segments over a 5-year period. ALDHbr (r = 0.78; 95% confidence interval [CI], 0.76-0.79), but not CD34+ (r = 0.25; 95% CI, 0.22-0.28), was strongly correlated with CFU content as well as ALDHbr content of the CBU. These results suggest that the ALDHbr segment assay (based on unit characteristics measured before release) is a reliable assessment of potency that allows rapid selection and release of CBUs from the cord blood bank to the transplant center for transplantation. PMID:26968535

  11. Environmental Development Plan (EDP). Geothermal energy systems, 1977

    Energy Technology Data Exchange (ETDEWEB)

    1978-03-01

    The Geothermal Energy Systems Environmental Development Plan (EDP) identifies the environmental, health, safety, social, and economic issues which are associated with the development, demonstration, and commercialization of geothermal resources and conversion technology. The EDP also describes the actions and implementation strategy required to resolve the issues identified. These actions may include the initiation of R and D activities, operations monitoring, baseline characterization studies, or activities leading to the development of standards and criteria in concert with other responsible agencies.

  12. Renewable Energy Feasibility Study Leading to Development of the Native Spirit Solar Energy Facility

    Energy Technology Data Exchange (ETDEWEB)

    Carolyn Stewart; Tracey LeBeau

    2008-01-31

    DOE-funded renewable energy feasibility study conducted by Red Mountain Tribal Energy on behalf of the Southwest Tribal Energy Consortium (SWTEC). During the course of the study, SWTEC members considered multiple options for the organization structure, selected a proposed organization structure, and drafted a Memorandum of Understanding for the SWTEC organization. High-level resource assessments for SWTEC members were completed; surveys were developed and completed to determine each member’s interest in multiple participation options, including on-reservation projects. With the survey inputs in mind, multiple energy project options were identified and evaluated on a high-level basis. That process led to a narrowing of the field of technology options to solar generation, specifically, utility-scale Concentrating Solar-Powered Generation projects, with a specific, tentative project location identified at the Fort Mojave Indian Reservation -- the Native Spirit Solar Energy Facility.

  13. Development of materials for the rapid manufacture of die cast tooling

    Science.gov (United States)

    Hardro, Peter Jason

    The focus of this research is to develop a material composition that can be processed by rapid prototyping (RP) in order to produce tooling for the die casting process. Where these rapidly produced tools will be superior to traditional tooling production methods by offering one or more of the following advantages: reduced tooling cost, shortened tooling creation time, reduced man-hours for tool creation, increased tool life, and shortened die casting cycle time. By utilizing RP's additive build process and vast material selection, there was a prospect that die cast tooling may be produced quicker and with superior material properties. To this end, the material properties that influence die life and cycle time were determined, and a list of materials that fulfill these "optimal" properties were highlighted. Physical testing was conducted in order to grade the processability of each of the material systems and to optimize the manufacturing process for the downselected material system. Sample specimens were produced and microscopy techniques were utilized to determine a number of physical properties of the material system. Additionally, a benchmark geometry was selected and die casting dies were produced from traditional tool materials (H13 steel) and techniques (machining) and from the newly developed materials and RP techniques (selective laser sintering (SLS) and laser engineered net shaping (LENS)). Once the tools were created, a die cast alloy was selected and a preset number of parts were shot into each tool. During tool creation, the manufacturing time and cost was closely monitored and an economic model was developed to compare traditional tooling to RP tooling. This model allows one to determine, in the early design stages, when it is advantageous to implement RP tooling and when traditional tooling would be best. The results of the physical testing and economic analysis has shown that RP tooling is able to achieve a number of the research objectives, namely

  14. Development of large wind energy power generation system

    Science.gov (United States)

    1985-01-01

    The background and development of an experimental 100 kW wind-energy generation system are described, and the results of current field tests are presented. The experimental wind turbine is a two-bladed down-wind horizontal axis propeller type with a 29.4 m diameter rotor and a tower 28 m in height. The plant was completed in March, 1983, and has been undergoing trouble-free tests since then. The present program calls for field tests during two years from fiscal 1983 to 1984. The development of technologies relating to the linkage and operation of wind-energy power generation system networks is planned along with the acquisition of basic data for the development of a large-scale wind energy power generation system.

  15. Plan for developing a comprehensive energy manpower information system

    Energy Technology Data Exchange (ETDEWEB)

    Stewart, Lawrence G.

    1979-09-01

    The report is designed to make a beginning in broadening the scope of the comprehensive manpower information system for energy research, development, and demonstration, so that it could cover all manpower related to energy. It develops a plan for this extension, including determining which taxonomies require change, specifying the subsequent stages involved in expanding CEMIS to all energy manpower, and providing the basis for cost estimates for this work. The report is organized as follows: The analytical rationale is described in Chapter II. Chapter III reviews the status of manpower data in a number of energy sectors, notes limitations and gaps in the data, and discusses improvements and additions that should be made. The scope and structure of CEMIS are laid out in Chapter IV, with particular reference to the development of analytical processes, and of analytical linking functions between bodies of data, and a description of their application in anticipating the employment impact of energy changes. The appropriate steps recommended for the further development of CEMIS are described in Chapter V.

  16. Operationalizing Sustainable Development Suncor Energy Inc: A critical case

    Science.gov (United States)

    Fergus, Andrew

    The concept of Sustainable Development is often understood as a framework within which organizations are able to move forward in a successful and beneficial manner. However, it is also seen as an ambiguous notion with little substance beyond a hopeful dialogue. If we are to base organizational action upon the concepts of Sustainable Development, it is vital that we comprehend the implications of how the concept is understood at a behavioral level. Industry leaders, competitors, shareholders, and stakeholders recognize Suncor Energy Inc as a leading organization within the Oil and Gas energy field. In particular it has a reputation for proactive thinking and action within the areas of environmental and social responsibility. Through attempting to integrate the ideas of Sustainable Development at a foundational level into the strategic plan, the management of Suncor Energy Inc has committed the organization to be a sustainable energy company. To achieve this vision the organization faces the challenge of converting strategic goals into operational behaviors, a process critical for a successful future. This research focuses on understanding the issues found with this conversion process. Through exploring a critical case, this research illuminates the reality of a best-case scenario. The findings thus have implications for both Suncor Energy Inc and more importantly all other organizations attempting to move in a Sustainable Development direction.

  17. USU Alternative and Unconventional Energy Research and Development

    Energy Technology Data Exchange (ETDEWEB)

    Behunin, Robert [Utah State Univ., Logan, UT (United States); Wood, Byard [Utah State Univ., Logan, UT (United States); Heaslip, Kevin [Utah State Univ., Logan, UT (United States); Zane, Regan [Utah State Univ., Logan, UT (United States); Lyman, Seth [Utah State Univ., Logan, UT (United States); Simmons, Randy [Utah State Univ., Logan, UT (United States); Christensen, David [Utah State Univ., Logan, UT (United States)

    2014-01-29

    The purpose and rationale of this project has been to develop enduring research capabilities at Utah State University (USU) and the Utah State University Research Foundation (USURF) in a number of energy efficient and renewable energy areas including primarily a) algae energy systems, b) solar lighting, c) intuitive buildings, d) electric transportation, 3) unconventional energy environmental monitoring and beneficial reuse technologies (water and CO2), f) wind energy profiling, and g) land use impacts. The long-term goal of this initiative has been to create high-wage jobs in Utah and a platform for sustained faculty and student engagement in energy research. The program’s objective has been to provide a balanced portfolio of R&D conducted by faculty, students, and permanent staff. This objective has been met. While some of the project’s tasks met with more success than others, as with any research project of this scope, overall the research has contributed valuable technical insight and broader understanding in key energy related areas. The algae energy systems research resulted in a highly productive workforce development enterprise as it graduated a large number of well prepared students entering alternative energy development fields and scholarship. Moreover, research in this area has demonstrated both the technological and economic limitations and tremendous potential of algae feedstock-based energy and co-products. Research conducted in electric transportation, specifically in both stationary and dynamic wireless inductive coupling charging technologies, has resulted in impactful advances. The project initiated the annual Conference on Electric Roads and Vehicles (http://www.cervconference.org/), which is growing and attracts more than 100 industry experts and scholars. As a direct result of the research, the USU/USURF spin-out startup, WAVE (Wireless Advanced Vehicle Electrification), continues work in wirelessly charged bus transit systems

  18. Development of loop-mediated isothermal amplification for rapid detection of Entamoeba histolytica.

    Science.gov (United States)

    Rivera, Windell L; Ong, Vanissa A

    2013-06-01

    To develop a loop-mediated isothermal amplification (LAMP) assay for the detection of Entamoeba histolytica E. histolytica, the causative agent of amebiasis. The LAMP primer set was designed from E. histolytica hemolysin gene HLY6. Genomic DNA of E. histolytica trophozoites strain HK9 was used to optimize the LAMP mixture and conditions. Amplification of DNA in the LAMP mixture was monitored through visual inspection for turbidity of the LAMP mix as well as addition of fluorescent dye. Positive LAMP reactions turned turbid while negative ones remained clear. Upon addition of a fluorescent dye, all positive reactions turned green while the negative control remained orange under ambient light. After electrophoresis in 1.5% agarose gels, a ladder of multiple bands of different sizes can be observed in positive samples while no bands were detected in the negative control. The sensitivity of the assay was found to be 5 parasites per reaction which corresponds to approximately 15.8 ng/μ L DNA. The specificity of the assay was verified by the absence of amplified products when DNA from other gastrointestinal parasites such as the morphologically similar but non-pathogenic species, Entamoeba dispar 39, and other diarrhea-causing organisms such as Blastocystis hominis and Escherichia coli were used. The LAMP assay we have developed enables the detection of E. histolytica with rapidity and ease, therefore rendering it is suitable for laboratory and field diagnosis of amebiasis. Copyright © 2013 Hainan Medical College. Published by Elsevier B.V. All rights reserved.

  19. SCOUT: developing a modular multimission spacecraft architecture for high-capability rapid access to space

    Science.gov (United States)

    Rogers, Aaron; Shoemaker, James; Jordan, Luis; McDermott, Scott

    2004-08-01

    The long lead and cycle times currently associated with development and launch of satellite systems have established a prohibitive environment for responsive deployment of tactical capability to orbit. With the advent of the RASCAL program - poised to offer launch capability to Low Earth Orbit (LEO) within 24 hours - there is a clear motivation for a comparable, multi-mission, rapidly configurable microsatellite. The SCOUT program is developing the key enabling technologies that will enable this capability while also addressing the production and logistic challenges essential to its implementation. Intrinsic to the design will be a "Plug-and-Sense" capability, which will enable a vehicle to detect the presence and orientation of integrated subsystem modules, as well as ascertain their function, and communicate key performance parameters. The system will utilize a heuristic, self-interrogation approach to provide a robust means of performing configuration and diagnostics activities that transcend nominal housekeeping routines to include an enhanced degree of system autonomy. A minimally structured design, emphasizing a lightweight, interchangeable framework will enable quick integration and deployment, while preserving high on-orbit payload mass fraction. Similarly, the system will also feature a novel approach to assembly, integration, and test activities that spans ground through on-orbit operations.

  20. Ideas for the rapid development of the structural models in mechanical engineering

    Science.gov (United States)

    Oanta, E.; Raicu, A.; Panait, C.

    2017-08-01

    Conceiving computer based instruments is a long run concern of the authors. Some of the original solutions are: optimal processing of the large matrices, interfaces between the programming languages, approximation theory using spline functions, numerical programming increased accuracy based on the extended arbitrary precision libraries. For the rapid development of the models we identified the following directions: atomization, ‘librarization’, parameterization, automatization and integration. Each of these directions has some particular aspects if we approach mechanical design problems or software development. Atomization means a thorough top-down decomposition analysis which offers an insight regarding the basic features of the phenomenon. Creation of libraries of reusable mechanical parts and libraries of programs (data types, functions) save time, cost and effort when a new model must be conceived. Parameterization leads to flexible definition of the mechanical parts, the values of the parameters being changed either using a dimensioning program or in accord to other parts belonging to the same assembly. The resulting templates may be also included in libraries. Original software applications are useful for the model’s input data generation, to input the data into CAD/FEA commercial applications and for the data integration of the various types of studies included in the same project.