WorldWideScience

Sample records for rapid destructive soft

  1. Rapidly destructive osteoarthritis can mimic infection

    Directory of Open Access Journals (Sweden)

    Gavin Hart, MD

    2016-03-01

    Full Text Available The intraoperative appearance of rapidly destructive osteoarthritis and septic arthritis can be similar. Three patients at our institution demonstrated preoperative or intraoperative findings potentially consistent with infection during primary total hip arthroplasty; however, none of these patients were found to have an actual infection. One of these patients underwent an unnecessary 2-stage total hip arthroplasty secondary to the intraoperative appearance of their joint fluid. We advocate performing an infection workup preoperatively when patients present with rapid degenerative changes of their hip joint to diminish the uncertainty of proceeding with arthroplasty.

  2. Rapid pyrolysis of Serbian soft brown coals

    Energy Technology Data Exchange (ETDEWEB)

    Goran G. Jankes; Olga Cvetkovic; Nebojsa M. Milovanovic; Marko Ercegovaci Ercegovac; Miroljub Adzic; Mirjana Stamenic [University of Belgrade, Belgrade (Serbia). Faculty of Mechanical Engineering

    2009-07-01

    Soft brown coals of the open coal fields of Kolubara and Kostolac are the main domestic energy sources of Serbia. This paper presents the results of investigations on rapid devolatilization of these two coals which have covered kinetics of devolatilization (based on total volatile yield), forms of sulphur and petrographic analysis of coal and char. Experiments of devolatilization were performed in inert gas (N{sub 2}) at atmospheric pressure and in batch-type hot-wire screen reactor. The mass-loss values of both coals at selected final reaction temperatures (300-900{sup o}C) and retention times (3-28 s) were obtained. Anthony and Howard's kinetic model was applied over two temperature ranges (300-500 and 700-900{sup o}C). The types of sulphur as monosulphide, sulphate, pyritic, and organic sulphur were determined for chars and original coals. Strong transformation of pyrite was evident even at low temperatures (300{sup o}C). Devolatilization of all types of sulphur has started over 600 and at 900{sup o}C the content of sulphur in char remained only 66% of total sulphur in original coal. Microscopic investigations were carried out on samples prepared for reflected light measurements. The petrographic analysis included: the ratio of unchanged and changed coal, maceral types, the share of cenospheres, isotropic mixed carbonized grains, mixed grains, small fragments, clay, and pyrite. The change of the structure of devolatilized coal was also observed. 20 refs., 10 figs., 6 tabs.

  3. Rapid pyrolysis of Serbian soft brown coals

    Directory of Open Access Journals (Sweden)

    Jankes Goran

    2009-01-01

    Full Text Available Soft brown coals of the open coal fields of Kolubara and Kostolac are the main domestic energy sources of Serbia. This paper presents the results of investigations on rapid devolatilization of these two coals which have covered kinetics of devolatilization (based on total volatile yield, forms of sulphur and petrographic analysis of coal and char. Experiments of devolatilization were performed in inert gas (N2 at atmospheric pressure and in batch-type hot-wire screen reactor. The mass-loss values of both coals at selected final reaction temperatures (300-900°C and retention times (3-28 s were obtained. Anthony and Howard's kinetic model was applied over two temperature ranges (300-500 and 700-900°C. The types of sulphur as monosulphide, sulphate, pyritic, and organic sulphur were determined for chars and original coals. Strong transformation of pyrite was evident even at low temperatures (300°C. Devolatilization of all types of sulphur has started over 600 and at 900°C the content of sulphur in char remained only 66% of total sulphur in original coal. Microscopic investigations were carried out on samples prepared for reflected light measurements. The petrographic analysis included: the ratio of unchanged and changed coal, maceral types, the share of cenosferes, isotropic mixed carbonized grains, mixed grains, small fragments, clay, and pyrite. The change of the structure of devolatilized coal was also observed.

  4. Hydroxyapatite crystal deposition causing rapidly destructive arthropathy of the hip joint

    Directory of Open Access Journals (Sweden)

    Jae-Hyuk Yang

    2011-01-01

    Full Text Available Destructive arthropathy of the hip joint can be attributed to various etiologies like rheumatoid arthritis, aseptic necrosis of the femur head, Charcot′s joint, subacute septic arthritis, and tubercular arthritis. A disease that results in much rapid destruction of the hip joint and is not associated with clinical syndrome of above mentioned disease has been reported way back in 1970. However, no evidence-based study has been published to support hydroxyapatite (HA crystals as a probable cause of rapidly destructive arthropathy of the hip joint. We report a case with microscopic and biochemical confirmation of HA crystal deposition causing destructive arthropathy of the hip joint.

  5. Non-destructive optical methods for the study of soft tissues

    Science.gov (United States)

    Santiago-Lona, Cynthia V.; Hernández-Montes, María. del Socorro; Mendoza Santoyo, F.; Muñoz, Silvino; Mendoza, Fernando

    2015-08-01

    In optical metrology, non-destructive methods allow studying some mechanical properties of the samples to investigate by using light, which leads to non-contact testing. This paper shows recent results of the application of non-destructive optical methods based on Digital Holographic Interferometry to the study biological tissues; particularly vocal folds and the tympanic membrane. The displacements data and its corresponding patterns found generates information on its characteristics that can be correlated with their physiological state. These methods prove to be an alternative viable and appropriate to characterize these soft tissues so important for the proper function of the human body. The result shows a potential impact on its possible uses in the field of otorhinolaryngology.

  6. Rapidly destructive arthropathy of the hip joint in patients with rheumatoid arthritis.

    Science.gov (United States)

    Yun, Ho Hyun; Song, Seung Yeop; Park, Sung Bum; Lee, Jee Wun

    2012-06-01

    This article describes 3 patients with rheumatoid arthritis in which hip joint conditions were similar to rapidly destructive arthropathy of the hip joint. The patients had the following additional characteristics: (1) age at diagnosis was comparatively older; (2) rheumatoid arthritis had an onset after age 40 years; (3) severe rheumatoid arthritis was present in >4 major joints; (4) long-term steroids and disease-modifying antirheumatic drugs were taken due to the high activity of rheumatoid arthritis; and (5) patients were underweight, with body mass indexes hip joint rarely occurs in osteoarthritis, avascular necrosis of the femoral head, and rheumatoid arthritis. Clinically, rapidly destructive arthropathy of the hip joint occurs in elderly patients who report severe pain but have a relatively preserved range of motion. Typical radiologic changes in rapidly destructive arthropathy of the hip joint are rapid destruction, resorption, or subluxation of the femoral head, destruction of the acetabulum, and minimal spur formation developing 6 to 12 months after symptom onset. Destruction of the hip joint in rheumatoid arthritis occurs in the sequence of depression, flattening, and loss, and commonly progresses gradually. When patients with rheumatoid arthritis report persistent and severe pain in the hip joint with no specific cause, rapidly destructive arthropathy of the hip joint must be identified through repetitive follow-up radiographic observations. Copyright 2012, SLACK Incorporated.

  7. Rapid Destruction of the Hip Joint Accompanied by an Enlarged Iliopsoas Bursa in a Healthy Man

    Science.gov (United States)

    Kim, Ju-Oh

    2014-01-01

    Association between enlarged iliopsoas bursa and hip lesions such as osteoarthritis of the hip or femoral head necrosis is infrequently seen. Enlarged iliopsoas bursa with a rapidly destructive arthropathy is claimed to be seen only in patients with rheumatoid arthritis. In this paper, we report a patient with a rapidly destructive arthropathy accompanied by an enlarged iliopsoas bursa that has been misdiagnosed as an infection. PMID:27536579

  8. Rapid Destruction of the Humeral Head Caused by Subchondral Insufficiency Fracture: A Report of Two Cases

    Directory of Open Access Journals (Sweden)

    Kenichi Goshima

    2015-01-01

    Full Text Available Rapidly destructive arthritis (RDA of the shoulder is a rare disease. Here, we report two cases, with different destruction patterns, which were most probably due to subchondral insufficiency fractures (SIFs. Case 1 involved a 77-year-old woman with right shoulder pain. Rapid destruction of both the humeral head and glenoid was seen within 1 month of the onset of shoulder pain. We diagnosed shoulder RDA and performed a hemiarthroplasty. Case 2 involved a 74-year-old woman with left shoulder pain. Humeral head collapse was seen within 5 months of pain onset, without glenoid destruction. Magnetic resonance imaging showed a bone marrow edema pattern with an associated subchondral low-intensity band, typical of SIF. Total shoulder arthroplasty was performed in this case. Shoulder RDA occurs as a result of SIF in elderly women; the progression of the joint destruction is more rapid in cases with SIFs of both the humeral head and the glenoid. Although shoulder RDA is rare, this disease should be included in the differential diagnosis of acute onset shoulder pain in elderly female patients with osteoporosis and persistent joint effusion.

  9. Static characterization of a soft elastomeric capacitor for non destructive evaluation applications

    Energy Technology Data Exchange (ETDEWEB)

    Saleem, Hussam [Civil, Construction and Environmental Engineering, Iowa State University (United States); Laflamme, Simon [Civil, Construction and Environmental Engineering, Iowa State University and Electrical and Computer Engineering, Iowa State University (United States); Zhang, Huanhuan; Geiger, Randall [Electrical and Computer Engineering, Iowa State University (United States); Kessler, Michael; Rajan, Krishna [Materials Science and Engineering, Iowa State University (United States)

    2014-02-18

    A large and flexible strain transducer consisting of a soft elastomeric capacitor (SEC) has been proposed by the authors. Arranged in a network setup, the sensing strategy offers tremendous potential at conducting non-destructive evaluation of large-scale surfaces. In prior work, the authors have demonstrated the performance of the sensor at tracking strain history, localizing cracks, and detecting vibration signatures. In this paper, we characterize the static performance of the proposed SEC. The characterization includes sensitivity of the signal, and temperature and humidity dependences. Tests are conducted on a simply supported aluminum beam subjected to bending as well as on a free standing sensor. The performance of the SEC is compared against off-the-shelf resistance-based strain gauges with resolution of 1 με. A sensitivity of 1190 pF/ε is obtained experimentally, in agreement with theory. Results also show the sensor linearity over the given level of strain, showing the promise of the SEC at monitoring of surface strain.

  10. Rapid destruction of the hip joint associated with enlarged iliopsoas bursa in a patient with refractory rheumatoid arthritis.

    Science.gov (United States)

    Yoshioka, Taro; Tachihara, Akitoshi; Koyama, Tairo; Iwakawa, Kayo; Sakane, Manabu; Nakamura, Hiroshi

    2008-08-01

    A case of refractory rheumatoid arthritis with a rapid destruction of the hip joint and an enlarged iliopsoas bursa is presented. Rapidly destructive coxarthrosis, chondrocalcinosis, suppurative arthritis, and pigmented villonodular synovitis were the differential diagnoses. Radiological examination showed that rheumatoid arthritis was most likely diagnosis. The patient was treated with total hip arthroplasty and etanercept, with good results.

  11. Bilateral rapidly destructive arthrosis of the hip joint resulting from subchondral fracture with superimposed secondary osteonecrosis

    Energy Technology Data Exchange (ETDEWEB)

    Yamamoto, Takuaki; Iwamoto, Yukihide [Kyushu University, Department of Orthopaedic Surgery, Fukuoka (Japan); Schneider, Robert [Hospital for Special Surgery, Department of Radiology, New York (United States); Bullough, Peter G. [Hospital for Special Surgery, Department of Laboratory Medicine, New York, NY (United States)

    2010-02-15

    A 57-year-old woman suffered rapid destruction of both hip joints over a 10 months period. At the first visit, her radiographs demonstrated slight joint space narrowing and acetabular cyst formation in both hips. Five months later, joint space narrowing had further progressed, and intra-articular injection of steroid was given in both hips. However, the hip pain gradually became worse. Five months later, both joint spaces had totally disappeared and both femoral heads had undergone massive collapse. At gross examination, both resected femoral heads showed extensive opaque yellow areas consistent with osteonecrosis. Microscopic examination of these areas revealed evidence of both extensive fracture and callus formation, as well as necrosis throughout, indicating that the osteonecrosis observed in this case was a secondary phenomenon superimposed on pre-existing osteoarthritis and subchondral fracture. There were many pseudogranulomatous lesions in the marrow space and necrotic area, where tiny fragments of bone and articular cartilage, surrounded by histiocytes and giant cells, were embedded, such as are typically seen in rapidly destructive arthrosis. No radiologic or morphologic evidence of primary osteonecrosis was noted. This case indicates that at least some cases of rapidly destructive arthritis are the result of subchondral fracture with superimposed secondary osteonecrosis. (orig.)

  12. Evaluation of immediate soft tissue changes after rapid maxillary expansion

    Directory of Open Access Journals (Sweden)

    Ki Beom Kim

    2012-10-01

    Full Text Available OBJECTIVE: To evaluate immediate soft tissue changes following rapid maxillary expansion (RME in growing patients, using cone beam computed tomography (CBCT. METHODS: Twenty-three consecutive patients (10 male, 13 female treated by RME were selected. Patients were scanned using CBCT prior to placement of the rapid maxillary expander (T0, then immediately following full activation of the appliance (T1. Defined landmarks were then located on the pre- and post-treatment orientated images. Change in landmark position from pre- to post-treatment was then measured. In addition to landmarks, 10 direct measures were made to determine distance change without regard to direction to measure soft tissue change of the lips. RESULTS: Significant transverse expansion was measured on most soft tissue landmark locations. All the measures made showed significant change in the lip position with a lengthening of the vertical dimension of the upper lip, and a generalized decrease of anterior-posterior thickness of both the upper and lower lips. CONCLUSIONS: Significant changes in the soft tissue do occur with RME treatment. There is a transverse widening of the midface, and a thinning of the lips.OBJETIVO: avaliar as mudanças imediatas no tecido mole após a expansão rápida da maxila (ERM em pacientes em fase de crescimento, usando tomografia computadorizada de feixe cônico (TCFC. MÉTODOS: vinte e três pacientes (10 do sexo masculino e 13 do feminino tratados com ERM foram selecionados. Os pacientes foram escaneados por TCFC antes da implantação do expansor maxilar (T0 e imediatamente após a completa ativação do aparelho (T1. Pontos cefalométricos definidos foram localizados nas imagens pré- e pós-tratamento. As mudanças de posição desses pontos do pré- para o pós-tratamento foram, então, analisadas. Adicionalmente aos pontos, 10 medições diretas foram realizadas para determinar a mudança nas distâncias - independentemente da direção - nos

  13. Rapidly destructive arthrosis of the hip joint in a young adult with systemic lupus erythematosus.

    Science.gov (United States)

    Lee, Yongseung; Motomura, Goro; Yamamoto, Takuaki; Nakashima, Yasuharu; Ohishi, Masanobu; Hamai, Satoshi; Iura, Kunio; Iwamoto, Yukihide

    2015-10-01

    A 37-year-old female had been treated with corticosteroids for systemic lupus erythematosus clinically diagnosed at age 10. She suddenly had right hip pain without any antecedent trauma. Four months after the onset of pain, she visited her primary care physician. On magnetic resonance imaging, joint space narrowing at the weight-bearing area was already seen with bone marrow edematous lesions in both the femoral head and acetabulum. She was treated non-operatively; however, her pain continued to worsen in severity. Thirteen months after the onset of pain, she was referred to our hospital. A plain radiograph showed subluxation of the collapsed femoral head accompanied by destruction of the acetabular rim. Because of her severe intractable pain, she underwent total hip arthroplasty 1 month after her first visit. Histological examination of the resected femoral head revealed pseudogranulomatous lesions along with prominent callus formation, suggesting rapid destruction of the femoral head.

  14. Mechanical high-intensity focused ultrasound destruction of soft tissue: working mechanisms and physiologic effects

    NARCIS (Netherlands)

    Hoogenboom, M.; Eikelenboom, D.C.; Brok, M.H.M.G.M. den; Heerschap, A.; Futterer, J.J.; Adema, G.J.

    2015-01-01

    The best known method of high-intensity focused ultrasound is thermal ablation, but interest in non-thermal, mechanical destruction is increasing. The advantages of mechanical ablation are that thermal protein denaturation remains limited and less damage is created to the surrounding tissue by

  15. Rapid non-destructive assessment of pork edible quality by using VIS/NIR spectroscopic technique

    Science.gov (United States)

    Zhang, Leilei; Peng, Yankun; Dhakal, Sagar; Song, Yulin; Zhao, Juan; Zhao, Songwei

    2013-05-01

    The objectives of this research were to develop a rapid non-destructive method to evaluate the edible quality of chilled pork. A total of 42 samples were packed in seal plastic bags and stored at 4°C for 1 to 21 days. Reflectance spectra were collected from visible/near-infrared spectroscopy system in the range of 400nm to 1100nm. Microbiological, physicochemical and organoleptic characteristics such as the total viable counts (TVC), total volatile basic-nitrogen (TVB-N), pH value and color parameters L* were determined to appraise pork edible quality. Savitzky-Golay (SG) based on five and eleven smoothing points, Multiple Scattering Correlation (MSC) and first derivative pre-processing methods were employed to eliminate the spectra noise. The support vector machines (SVM) and partial least square regression (PLSR) were applied to establish prediction models using the de-noised spectra. A linear correlation was developed between the VIS/NIR spectroscopy and parameters such as TVC, TVB-N, pH and color parameter L* indexes, which could gain prediction results with Rv of 0.931, 0.844, 0.805 and 0.852, respectively. The results demonstrated that VIS/NIR spectroscopy technique combined with SVM possesses a powerful assessment capability. It can provide a potential tool for detecting pork edible quality rapidly and non-destructively.

  16. Rapidly destructive arthrosis of the shoulder joints: radiographic, magnetic resonance imaging, and histopathologic findings.

    Science.gov (United States)

    Kekatpure, Aashay L; Sun, Ji-Ho; Sim, Gyeong-Bo; Chun, Jae-Myeung; Jeon, In-Ho

    2015-06-01

    Rapidly destructive arthrosis of the humeral head is a rare condition with an elusive pathophysiologic mechanism. In this study, radiographic and histopathologic findings were analyzed to determine the clinical characteristics of this rare condition. We retrospectively analyzed 189 patients who underwent total shoulder arthroplasty from January 2001 to August 2012. Among them, 9 patients showed a particular pattern of rapid collapse of the humeral head on plain radiography and magnetic resonance imaging (MRI) within 12 months from symptom onset. Patients with trauma, rheumatoid arthritis, steroid intake, neurologic osteoarthropathy, osteonecrosis, renal osteoarthropathy, or gout were excluded. All patients were women, with a mean age of 72.0 years (range, 63-85 years). The right side was involved in 7 cases and the left in 2 cases. The mean duration of humeral head collapse was 5.6 months (range, 2-11 months) from the onset of shoulder pain. Plain radiographs of all patients showed a unique pattern of humeral head flattening, which appeared like a clean surgical cut with bone debris around the humeral head. MRI findings revealed significant joint effusion and bone marrow edema in the humeral head, without involvement of the glenoid. Pathologic findings showed both fragmentation and regeneration of bone matrix, representing fracture healing. The important features of rapidly destructive shoulder arthrosis are unique flattened humeral head collapse with MRI showing massive joint effusion and bone marrow edema in the remnant humeral head. This condition should be considered in the differential diagnosis of elderly women with insidious shoulder pain. Copyright © 2015 Journal of Shoulder and Elbow Surgery Board of Trustees. Published by Elsevier Inc. All rights reserved.

  17. Ultra-portable, wireless smartphone spectrometer for rapid, non-destructive testing of fruit ripeness

    Science.gov (United States)

    Das, Anshuman J.; Wahi, Akshat; Kothari, Ishan; Raskar, Ramesh

    2016-09-01

    We demonstrate a smartphone based spectrometer design that is standalone and supported on a wireless platform. The device is inherently low-cost and the power consumption is minimal making it portable to carry out a range of studies in the field. All essential components of the device like the light source, spectrometer, filters, microcontroller and wireless circuits have been assembled in a housing of dimensions 88 mm × 37 mm × 22 mm and the entire device weighs 48 g. The resolution of the spectrometer is 15 nm, delivering accurate and repeatable measurements. The device has a dedicated app interface on the smartphone to communicate, receive, plot and analyze spectral data. The performance of the smartphone spectrometer is comparable to existing bench-top spectrometers in terms of stability and wavelength resolution. Validations of the device were carried out by demonstrating non-destructive ripeness testing in fruit samples. Ultra-Violet (UV) fluorescence from Chlorophyll present in the skin was measured across various apple varieties during the ripening process and correlated with destructive firmness tests. A satisfactory agreement was observed between ripeness and fluorescence signals. This demonstration is a step towards possible consumer, bio-sensing and diagnostic applications that can be carried out in a rapid manner.

  18. Elevated levels of serum type I collagen C-telopeptide in patients with rapidly destructive osteoarthritis of the hip

    OpenAIRE

    Berger, Christian E.; Kröner, Andreas; Stiegler, Helmar; Leitha, Thomas; Engel, Alfred

    2004-01-01

    We compared type I collagen degradation using serum cross-linking C-terminal telopeptide (ICTP) in 18 patients with rapidly destructive osteoarthrosis and in 20 patients with slowly progressive osteoarthrosis of the hip. The diagnosis was established by clinical examination and radiographic evaluation. Total hip arthroplasty was performed in all patients. Serum levels of ICTP, bone-specific alkaline phosphatase, osteocalcin and N-terminal propeptide were studied. Patients with rapidly destruc...

  19. Recent advances in rapid and non-destructive assessment of meat quality using hyperspectral imaging

    Science.gov (United States)

    Tao, Feifei; Ngadi, Michael

    2016-05-01

    Meat is an important food item in human diet. Its production and consumption has greatly increased in the last decades with the development of economies and improvement of peoples' living standards. However, most of the traditional methods for evaluation of meat quality are time-consuming, laborious, inconsistent and destructive to samples, which make them not appropriate for a fast-paced production and processing environment. Development of innovative and non-destructive optical sensing techniques to facilitate simple, fast, and accurate evaluation of quality are attracting increasing attention in the food industry. Hyperspectral imaging is one of the promising techniques. It integrates the combined merits of imaging and spectroscopic techniques. This paper provides a comprehensive review on recent advances in evaluation of the important quality attributes of meat including color, marbling, tenderness, pH, water holding capacity, and also chemical composition attributes such as moisture content, protein content and fat content in pork, beef and lamb. In addition, the future potential applications and trends of hyperspectral imaging are also discussed in this paper.

  20. Rapid and non-destructive assessment of polyunsaturated fatty acids contents in Salmon using near-infrared hyperspectral imaging

    Science.gov (United States)

    Tao, Feifei; Mba, Ogan; Liu, Li; Ngadi, Michael

    2017-04-01

    Polyunsaturated fatty acids (PUFAs) are important nutrients present in Salmon. However, current methods for quantifying the fatty acids (FAs) contents in foods are generally based on gas chromatography (GC) technique, which is time-consuming, laborious and destructive to the tested samples. Therefore, the capability of near-infrared (NIR) hyperspectral imaging to predict the PUFAs contents of C20:2 n-6, C20:3 n-6, C20:5 n-3, C22:5 n-3 and C22:6 n-3 in Salmon fillets in a rapid and non-destructive way was investigated in this work. Mean reflectance spectra were first extracted from the region of interests (ROIs), and then the spectral pre-processing methods of 2nd derivative and Savitzky-Golay (SG) smoothing were performed on the original spectra. Based on the original and the pre-processed spectra, PLSR technique was employed to develop the quantitative models for predicting each PUFA content in Salmon fillets. The results showed that for all the studied PUFAs, the quantitative models developed using the pre-processed reflectance spectra by "2nd derivative + SG smoothing" could improve their modeling results. Good prediction results were achieved with RP and RMSEP of 0.91 and 0.75 mg/g dry weight, 0.86 and 1.44 mg/g dry weight, 0.82 and 3.01 mg/g dry weight for C20:3 n-6, C22:5 n-3 and C20:5 n-3, respectively after pre-processing by "2nd derivative + SG smoothing". The work demonstrated that NIR hyperspectral imaging could be a useful tool for rapid and non-destructive determination of the PUFA contents in fish fillets.

  1. Rapid and non-destructive discrimination of tea varieties by near ...

    African Journals Online (AJOL)

    Classification and regression trees (CART), compared with linear discriminant analysis (LDA), and partial squares-discriminant analysis (PLS-DA), was then employed for establishing the discrimination rule. Experimental results showed that the tea quality could be accurately, rapidly, and non-invasively identified via NIR ...

  2. Large Rapidity Gap Method to Select Soft Diffraction Dissociation at the LHC

    Directory of Open Access Journals (Sweden)

    Emily Nurse

    2016-01-01

    Full Text Available In proton-proton (pp collisions, any process involves exchanging the vacuum quantum numbers is known as diffractive process. A diffractive process with no large Q2 is called soft diffractive process. The diffractive processes are important for understanding nonperturbative QCD effects and they also constitute a significant fraction of the total pp cross section. The diffractive events are typically characterized by a region of the detector without particles, known as a rapidity gap. In order to observe diffractive events in this way, we consider the pseudorapidity acceptance in the forward region of the ATLAS and CMS detectors at the Large Hadron Collider (LHC and discuss the methods to select soft diffractive dissociation for pp collisions at s=7 TeV. It is shown that, in the limited detector rapidity acceptance, it is possible to select diffractive dissociation events by requiring a rapidity gap in the event; however, without using forward detectors, it seems not possible to fully separate single and double diffractive dissociation events. The Zero Degree Calorimeters can be used to distinguish the type of the diffractive processes up to a certain extent.

  3. Bordetella trematum sepsis with shock in a diabetic patient with rapidly developing soft tissue infection.

    Science.gov (United States)

    Majewski, Lorrance L; Nogi, Masayuki; Bankowski, Matthew J; Chung, Heath H

    2016-09-01

    Bordetella is a gram-negative, glucose non-fermenting bacillus, consisting of many host-associated species. B. trematum has previously been identified in wound infections, but rarely known to be a source of bacteremia. Currently, 16S rRNA sequencing represents the reference standard method by which identification is made. Herein, we present a case of fatal B. trematum bacteremia with septic shock. The presumed primary site of the infection was a rapidly developing left leg deep soft tissue infection without necrotizing fasciitis. B. trematum should now be considered as a significant pathogen in sepsis. Copyright © 2016 Elsevier Inc. All rights reserved.

  4. An automated system for rapid non-destructive enumeration of growing microbes.

    Directory of Open Access Journals (Sweden)

    Roanna London

    Full Text Available BACKGROUND: The power and simplicity of visual colony counting have made it the mainstay of microbiological analysis for more than 130 years. A disadvantage of the method is the long time required to generate visible colonies from cells in a sample. New rapid testing technologies generally have failed to maintain one or more of the major advantages of culture-based methods. PRINCIPAL FINDINGS: We present a new technology and platform that uses digital imaging of cellular autofluorescence to detect and enumerate growing microcolonies many generations before they become visible to the eye. The data presented demonstrate that the method preserves the viability of the microcolonies it detects, thus enabling generation of pure cultures for microbial identification. While visual colony counting detects Escherichia coli colonies containing about 5x10(6 cells, the new imaging method detects E. coli microcolonies when they contain about 120 cells and microcolonies of the yeast Candida albicans when they contain only about 12 cells. We demonstrate that digital imaging of microcolony autofluorescence detects a broad spectrum of prokaryotic and eukaryotic microbes and present a model for predicting the time to detection for individual strains. Results from the analysis of environmental samples from pharmaceutical manufacturing plants containing a mixture of unidentified microbes demonstrate the method's improved test turnaround times. CONCLUSION: This work demonstrates a new technology and automated platform that substantially shortens test times while maintaining key advantages of the current methods.

  5. Cockroaches traverse crevices, crawl rapidly in confined spaces, and inspire a soft, legged robot.

    Science.gov (United States)

    Jayaram, Kaushik; Full, Robert J

    2016-02-23

    Jointed exoskeletons permit rapid appendage-driven locomotion but retain the soft-bodied, shape-changing ability to explore confined environments. We challenged cockroaches with horizontal crevices smaller than a quarter of their standing body height. Cockroaches rapidly traversed crevices in 300-800 ms by compressing their body 40-60%. High-speed videography revealed crevice negotiation to be a complex, discontinuous maneuver. After traversing horizontal crevices to enter a vertically confined space, cockroaches crawled at velocities approaching 60 cm⋅s(-1), despite body compression and postural changes. Running velocity, stride length, and stride period only decreased at the smallest crevice height (4 mm), whereas slipping and the probability of zigzag paths increased. To explain confined-space running performance limits, we altered ceiling and ground friction. Increased ceiling friction decreased velocity by decreasing stride length and increasing slipping. Increased ground friction resulted in velocity and stride length attaining a maximum at intermediate friction levels. These data support a model of an unexplored mode of locomotion--"body-friction legged crawling" with body drag, friction-dominated leg thrust, but no media flow as in air, water, or sand. To define the limits of body compression in confined spaces, we conducted dynamic compressive cycle tests on living animals. Exoskeletal strength allowed cockroaches to withstand forces 300 times body weight when traversing the smallest crevices and up to nearly 900 times body weight without injury. Cockroach exoskeletons provided biological inspiration for the manufacture of an origami-style, soft, legged robot that can locomote rapidly in both open and confined spaces.

  6. Cockroaches traverse crevices, crawl rapidly in confined spaces, and inspire a soft, legged robot

    Science.gov (United States)

    Jayaram, Kaushik; Full, Robert J.

    2016-01-01

    Jointed exoskeletons permit rapid appendage-driven locomotion but retain the soft-bodied, shape-changing ability to explore confined environments. We challenged cockroaches with horizontal crevices smaller than a quarter of their standing body height. Cockroaches rapidly traversed crevices in 300–800 ms by compressing their body 40–60%. High-speed videography revealed crevice negotiation to be a complex, discontinuous maneuver. After traversing horizontal crevices to enter a vertically confined space, cockroaches crawled at velocities approaching 60 cm⋅s−1, despite body compression and postural changes. Running velocity, stride length, and stride period only decreased at the smallest crevice height (4 mm), whereas slipping and the probability of zigzag paths increased. To explain confined-space running performance limits, we altered ceiling and ground friction. Increased ceiling friction decreased velocity by decreasing stride length and increasing slipping. Increased ground friction resulted in velocity and stride length attaining a maximum at intermediate friction levels. These data support a model of an unexplored mode of locomotion—“body-friction legged crawling” with body drag, friction-dominated leg thrust, but no media flow as in air, water, or sand. To define the limits of body compression in confined spaces, we conducted dynamic compressive cycle tests on living animals. Exoskeletal strength allowed cockroaches to withstand forces 300 times body weight when traversing the smallest crevices and up to nearly 900 times body weight without injury. Cockroach exoskeletons provided biological inspiration for the manufacture of an origami-style, soft, legged robot that can locomote rapidly in both open and confined spaces. PMID:26858443

  7. Two-loop beam and soft functions for rapidity-dependent jet vetoes

    Energy Technology Data Exchange (ETDEWEB)

    Gangal, Shireen [Theory Group, Deutsches Elektronen-Synchrotron (DESY),Notkestraße 85, D-22607 Hamburg (Germany); Gaunt, Jonathan R. [Nikhef Theory Group and VU University Amsterdam,De Boelelaan 1081, NL-1081 HV Amsterdam (Netherlands); Stahlhofen, Maximilian [PRISMA Cluster of Excellence, Institute of Physics, Johannes Gutenberg University,Staudingerweg 7, D-55128 Mainz (Germany); Tackmann, Frank J. [Theory Group, Deutsches Elektronen-Synchrotron (DESY),Notkestraße 85, D-22607 Hamburg (Germany)

    2017-02-06

    Jet vetoes play an important role in many analyses at the LHC. Traditionally, jet vetoes have been imposed using a restriction on the transverse momentum p{sub Tj} of jets. Alternatively, one can also consider jet observables for which p{sub Tj} is weighted by a smooth function of the jet rapidity y{sub j} that vanishes as |y{sub j}|→∞. Such observables are useful as they provide a natural way to impose a tight veto on central jets but a looser one at forward rapidities. We consider two such rapidity-dependent jet veto observables, T{sub Bj} and T{sub Cj}, and compute the required beam and dijet soft functions for the jet-vetoed color-singlet production cross section at two loops. At this order, clustering effects from the jet algorithm become important. The dominant contributions are computed fully analytically while corrections that are subleading in the limit of small jet radii are expressed in terms of finite numerical integrals. Our results enable the full NNLL{sup ′} resummation and are an important step towards N{sup 3}LL resummation for cross sections with a T{sub Bj} or T{sub Cj} jet veto.

  8. Two-loop beam and soft functions for rapidity-dependent jet vetoes

    Energy Technology Data Exchange (ETDEWEB)

    Gangal, Shireen; Tackmann, Frank J. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany). Theory Group; Gaunt, Jonathan R. [Amsterdam VU Univ. (Netherlands). NIKHEF Theory Group; Stahlhofen, Maximilian [Mainz Univ. (Germany). PRISMA Cluster of Excellence

    2016-08-15

    Jet vetoes play an important role in many analyses at the LHC. Traditionally, jet vetoes have been imposed using a restriction on the transverse momentum p{sub Tj} of jets. Alternatively, one can also consider jet observables for which p{sub Tj} is weighted by a smooth function of the jet rapidity y{sub j} that vanishes as vertical stroke y{sub j} vertical stroke →∞. Such observables are useful as they provide a natural way to impose a tight veto on central jets but a looser one at forward rapidities. We consider two such rapidity-dependent jet veto observables, Τ{sub Bj} and Τ{sub Cj}, and compute the required beam and dijet soft functions for the jet-vetoed colorsinglet production cross section at two loops. At this order, clustering effects from the jet algorithm become important. The dominant contributions are computed fully analytically while corrections that are subleading in the limit of small jet radii are expressed in terms of finite numerical integrals. Our results enable the full NNLL' resummation and are an important step towards N{sup 3}LL resummation for cross sections with a Τ{sub Bj} or Τ{sub Cj} jet veto.

  9. Two-loop beam and soft functions for rapidity-dependent jet vetoes

    Science.gov (United States)

    Gangal, Shireen; Gaunt, Jonathan R.; Stahlhofen, Maximilian; Tackmann, Frank J.

    2017-02-01

    Jet vetoes play an important role in many analyses at the LHC. Traditionally, jet vetoes have been imposed using a restriction on the transverse momentum p Tj of jets. Alternatively, one can also consider jet observables for which p Tj is weighted by a smooth function of the jet rapidity y j that vanishes as | y j | → ∞. Such observables are useful as they provide a natural way to impose a tight veto on central jets but a looser one at forward rapidities. We consider two such rapidity-dependent jet veto observables, T_{Bj} and {T_{Cj} , and compute the required beam and dijet soft functions for the jet-vetoed color-singlet production cross section at two loops. At this order, clustering effects from the jet algorithm become important. The dominant contributions are computed fully analytically while corrections that are subleading in the limit of small jet radii are expressed in terms of finite numerical integrals. Our results enable the full NNLL' resummation and are an important step towards N3LL resummation for cross sections with a T_{Bj} or T_{Cj} jet veto.

  10. CGC/saturation approach for soft interactions at high energy: long range rapidity correlations

    Energy Technology Data Exchange (ETDEWEB)

    Gotsman, E.; Maor, U. [Tel Aviv University, Department of Particle Physics, School of Physics and Astronomy, Raymond and Beverly Sackler Faculty of Exact Science, Tel Aviv (Israel); Levin, E. [Tel Aviv University, Department of Particle Physics, School of Physics and Astronomy, Raymond and Beverly Sackler Faculty of Exact Science, Tel Aviv (Israel); Universidad Tecnica Federico Santa Maria and Centro Cientifico- Tecnologico de Valparaiso, Departemento de Fisica, Valparaiso (Chile)

    2015-11-15

    In this paper we continue our program to construct a model for high energy soft interactions that is based on the CGC/saturation approach. The main result of this paper is that we have discovered a mechanism that leads to large long range rapidity correlations and results in large values of the correlation function R(y{sub 1}, y{sub 2}) ≥ 1, which is independent of y{sub 1} and y{sub 2}. Such a behavior of the correlation function provides strong support for the idea that at high energies the system of partons that is produced is not only dense but also has strong attractive forces acting between the partons. (orig.)

  11. Proposal of a New Method for Measuring Förster Resonance Energy Transfer (FRET Rapidly, Quantitatively and Non-Destructively

    Directory of Open Access Journals (Sweden)

    Paul Johannes Helm

    2012-09-01

    Full Text Available The process of radiationless energy transfer from a chromophore in an excited electronic state (the “donor” to another chromophore (an “acceptor”, in which the energy released by the donor effects an electronic transition, is known as “Förster Resonance Energy Transfer” (FRET. The rate of energy transfer is dependent on the sixth power of the distance between donor and acceptor. Determining FRET efficiencies is tantamount to measuring distances between molecules. A new method is proposed for determining FRET efficiencies rapidly, quantitatively, and non-destructively on ensembles containing donor acceptor pairs: at wavelengths suitable for mutually exclusive excitations of donors and acceptors, two laser beams are intensity-modulated in rectangular patterns at duty cycle ½ and frequencies ƒ1 and ƒ2 by electro-optic modulators. In an ensemble exposed to these laser beams, the donor excitation is modulated at ƒ1, and the acceptor excitation, and therefore the degree of saturation of the excited electronic state of the acceptors, is modulated at ƒ2. Since the ensemble contains donor acceptor pairs engaged in FRET, the released donor fluorescence is modulated not only at ƒ1 but also at the beat frequency Δƒ: = |ƒ1 − ƒ2|. The depth of the latter modulation, detectable via a lock-in amplifier, quantitatively indicates the FRET efficiency.

  12. Towards development of a rapid and effective non-destructive testing strategy to identify brominated flame retardants in the plastics of consumer products.

    Science.gov (United States)

    Gallen, Christie; Banks, Andrew; Brandsma, Sicco; Baduel, Christine; Thai, Phong; Eaglesham, Geoff; Heffernan, Amy; Leonards, Pim; Bainton, Paul; Mueller, Jochen F

    2014-09-01

    Polybrominated diphenyl ethers (PBDEs) are a class of brominated flame retardants (BFRs) once extensively used in the plastics of a wide range of consumer products. The listing of certain congeners that are constituents of commercial PBDE mixtures (including c-octaBDE) in the Stockholm Convention and tightening regulation of many other BFRs in recent years have created the need for a rapid and effective method of identifying BFR-containing plastics. A three-tiered testing strategy comparing results from non-destructive testing (X-ray fluorescence (XRF)) (n=1714), a surface wipe test (n=137) and destructive chemical analysis (n=48) was undertaken to systematically identify BFRs in a wide range of consumer products. XRF rapidly identified bromine in 92% of products later confirmed to contain BFRs. Surface wipes of products identified tetrabromobisphenol A (TBBPA), c-octaBDE congeners and BDE-209 with relatively high accuracy (>75%) when confirmed by destructive chemical analysis. A relationship between the amounts of BFRs detected in surface wipes and subsequent destructive testing shows promise in predicting not only the types of BFRs present but also estimating the concentrations present. Information about the types of products that may contain persistent BFRs will assist regulators in implementing policies to further reduce the occurrence of these chemicals in consumer products. Copyright © 2014 Elsevier B.V. All rights reserved.

  13. Phase selection and nanocrystallization in Cu-free soft magnetic FeSiNbB amorphous alloy upon rapid annealing

    Energy Technology Data Exchange (ETDEWEB)

    Morsdorf, L.; Povstugar, I.; Raabe, D. [Department for Microstructure Physics and Alloy Design, Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-Str. 1, 40237 Düsseldorf (Germany); Pradeep, K. G., E-mail: kg.prad@mpie.de, E-mail: kgprad@gmail.com [Department for Microstructure Physics and Alloy Design, Max-Planck-Institut für Eisenforschung GmbH, Max-Planck-Str. 1, 40237 Düsseldorf (Germany); Materials Chemistry, RWTH Aachen University, Kopernikusstrasse 10, 52074 Aachen (Germany); Herzer, G. [Vacuumschmelze GmbH & Co KG, Grüner Weg 37, D-63450 Hanau (Germany); Kovács, A.; Dunin-Borkowski, R. E. [Ernst Ruska-Centre for Microscopy and Spectroscopy with Electrons and Peter Grünberg Institute 5, Forschungszentrum Jülich, 52425 Jülich (Germany); Konygin, G. [Physical-Technical Institute UrB RAS, Kirov str. 132, 426008 Izhevsk (Russian Federation); Choi, P. [Department of Materials Science and Engineering, Korea Advanced Institute of Science and Technology, Daejeon 34141 (Korea, Republic of)

    2016-03-28

    Nucleation of soft magnetic Fe{sub 3}Si nanocrystals in Cu-free Fe{sub 74.5}Si{sub 15.5}Nb{sub 3}B{sub 7} alloy, upon rapid (10 s) and conventional (30 min) annealing, was investigated using x-ray diffraction, transmission electron microscopy, Mössbauer spectroscopy, and atom probe tomography. By employing rapid annealing, preferential nucleation of Fe{sub 3}Si nanocrystals was achieved, whereas otherwise there is simultaneous nucleation of both Fe{sub 3}Si and undesired Fe-B compound phases. Analysis revealed that the enhanced Nb diffusivity, achieved during rapid annealing, facilitates homogeneous nucleation of Fe{sub 3}Si nanocrystals while shifting the secondary Fe-B crystallization to higher temperatures resulting in pure soft magnetic nanocrystallization with very low coercivities of ∼10 A/m.

  14. Potential of multispectral imaging technology for rapid and non-destructive determination of the microbiological quality of beef filets during aerobic storage

    DEFF Research Database (Denmark)

    Panagou, Efstathios Z.; Papadopoulou, Olga; Carstensen, Jens Michael

    2014-01-01

    samples and correlated with microbiological data (log counts), for total viable counts (TVCs), Pseudomonas spp., and Brochothrix thermosphacta. Qualitative analysis (PLS-DA) was employed for the discrimination of meat samples in three microbiological quality classes based on the values of total viable....... thermosphacta, and TVC, respectively. The results indicated that multispectral vision technology has significant potential as a rapid and non-destructive technique in assessing the microbiological quality of beef fillets....

  15. Softly, Softly

    Science.gov (United States)

    Diamond, Abigail

    2008-01-01

    The term "soft skills" encompasses a cluster of personality traits, language abilities, personal habits and, ultimately, values and attitudes. Soft skills complement "harder", more technical, skills, such as being able to read or type a letter, but they also have a significant impact on the ability of people to do their jobs…

  16. Long-range rapidity correlations in soft interactions at high energies

    Energy Technology Data Exchange (ETDEWEB)

    Gotsman, E.; Maor, U. [Tel Aviv University, Department of Particle Physics, School of Physics and Astronomy, Raymond and Beverly Sackler Faculty of Exact Science, Tel Aviv (Israel); Levin, E. [Tel Aviv University, Department of Particle Physics, School of Physics and Astronomy, Raymond and Beverly Sackler Faculty of Exact Science, Tel Aviv (Israel); Universidad Tecnica Federico Santa Maria and Centro Cientifico-Tecnologico de Valparaiso, Departamento de Fisica, Valparaiso (Chile)

    2013-12-15

    In this paper we take the next step (following the successful description of inclusive hadron production) in describing the structure of the bias events without the aid of Monte Carlo codes. Two new results are presented: (i) a method for calculating the two particle correlation functions in the BFKL pomeron calculus in zero transverse dimension; and (ii) an estimation of the values of these correlations in a model of soft interactions. Comparison with the multiplicity data at the LHC is given. (orig.)

  17. Rapidly-dissolvable microneedle patches via a highly scalable and reproducible soft lithography approach.

    Science.gov (United States)

    Moga, Katherine A; Bickford, Lissett R; Geil, Robert D; Dunn, Stuart S; Pandya, Ashish A; Wang, Yapei; Fain, John H; Archuleta, Christine F; O'Neill, Adrian T; Desimone, Joseph M

    2013-09-25

    Microneedle devices for transdermal drug delivery have recently become an attractive method to overcome the diffusion-limiting epidermis and effectively transport therapeutics to the body. Here, we demonstrate the fabrication of highly reproducible and completely dissolvable polymer microneedles on flexible water-soluble substrates. These biocompatible microneedles (made by using a soft lithography process known as PRINT) showed efficacy in piercing both murine and human skin samples and delivering a fluorescent drug surrogate to the tissue. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Rapid and non-destructive determination of rancidity levels in butter cookies by multi-spectral imaging.

    Science.gov (United States)

    Xia, Qing; Liu, Changhong; Liu, Jinxia; Pan, Wenjuan; Lu, Xuzhong; Yang, Jianbo; Chen, Wei; Zheng, Lei

    2016-03-30

    Rancidity is an important attribute for quality assessment of butter cookies, while traditional methods for rancidity measurement are usually laborious, destructive and prone to operational error. In the present paper, the potential of applying multi-spectral imaging (MSI) technology with 19 wavelengths in the range of 405-970 nm to evaluate the rancidity in butter cookies was investigated. Moisture content, acid value and peroxide value were determined by traditional methods and then related with the spectral information by partial least squares regression (PLSR) and back-propagation artificial neural network (BP-ANN). The optimal models for predicting moisture content, acid value and peroxide value were obtained by PLSR. The correlation coefficient (r) obtained by PLSR models revealed that MSI had a perfect ability to predict moisture content (r = 0.909), acid value (r = 0.944) and peroxide value (r = 0.971). The study demonstrated that the rancidity level of butter cookies can be continuously monitored and evaluated in real-time by the multi-spectral imaging, which is of great significance for developing online food safety monitoring solutions. © 2015 Society of Chemical Industry.

  19. A simple and rapid resonance Rayleigh scattering method for detection of indigo carmine in soft drink.

    Science.gov (United States)

    Li, Qin; Yang, Jidong; Tan, Xuanping; Zhang, Zhan; Hu, Xiaomei; Yang, Menghuan

    2016-08-01

    A novel method that uses acridine orange (AO) to detect indigo carmine (IC) in soft drinks was developed. The method is highly sensitive and is based on a resonance Rayleigh scattering (RRS) technique. In Britton-Robinson (BR) buffer solution, pH 4.3, the weak RRS intensity of AO was greatly enhanced by the addition of IC, with the maximum peak located at 332 nm. Under optimum conditions, it was found that the enhanced RRS intensity was proportional to the concentration of IC over a range of 2-32 × 10(-6)  mol/L. A low detection limit of 2.4 × 10(-8)  mol/L was achieved. The sensitivity and selectivity of the method are high enough to permit the determination of trace amounts of IC without any significant interference from high levels of other components such as common anions and other amino acids. Finally, the concentration of IC in three different soft drinks was determined with satisfactory results. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

  20. Rapid, non-destructive and non-contact inspection of solid foods by means of photothermal radiometry; thermal effusivity and initial heating coefficient

    Science.gov (United States)

    Gijsbertsen, A.; Bicanic, D.; Gielen, J. L. W.; Chirtoc, M.

    2004-03-01

    CO 2-laser photothermal radiometry (PTR) was demonstrated to be suitable for the non-destructive and non-contact characterization (both optical and thermal) of solid phase agricultural commodities (fresh vegetables, fruits) and confectionery products (candy). Proper interpretation of PTR signals enable one to calculate two parameters, i.e. the well known thermal effusivity e ( e= λρc p, where λ and ρcp are the thermal conductivity and the volume specific heat, respectively) and a newly introduced physical quantity termed 'initial heating coefficient' chi ( χ= β/( ρcp), β is the absorption coefficient). Obtained values for e are in a good agreement with data reported in the literature. PTR enables one to rapidly determine e via a single measurement. As opposed to this, the knowledge of two out of three thermophysical parameters (thermal diffusivity, thermal conductivity and volume specific heat) is a condition sine qua non for determining effusivity in the conventional manner.

  1. Two-loop beam and soft functions for rapidity-dependent jet vetoes

    NARCIS (Netherlands)

    Gangal, S.; Gaunt, J.R.; Stahlhofen, M.; Tackmann, F.

    Jet vetoes play an important role in many analyses at the LHC. Traditionally, jet vetoes have been imposed using a restriction on the transverse momentum pTj of jets. Alternatively, one can also consider jet observables for which pTj is weighted by a smooth function of the jet rapidity yj that

  2. Scar sarcoidosis on a finger mimicking a rapidly growing soft tissue tumour: a case report

    Directory of Open Access Journals (Sweden)

    Henrichs Marcel-Philipp

    2012-10-01

    Full Text Available Abstract Background Scar sarcoidosis is a rare and uncommon but specific cutaneous manifestation of sarcoidosis. In general it arises in pre-existing scars deriving from mechanical traumas. As most surgeons dealing with scars might not be aware of cutaneous sarcoidosis and its different types of appearance the appropriate staging and treatment might be missed or at least delayed. To our knowledge this is the first case in literature of scar sarcoidosis on a finger. Case presentation We present a case of a 33-year-old carpenter who developed scar sarcoidosis on his right index finger 4 years after the tendon of the long digital flexor got accidentally cut by an angle grinder. He was referred due to a swelling of the finger suspected to be a malignant soft tissue tumour. The circumference of the affected finger had almost doubled, adding up to 94 mm. Incision biopsy revealed typical noncaseating granulomas. Further investigation showed a systemic extent of the disease with involvement of the lung. A systemic treatment with oral steroids led to an almost full regression of the swelling with restoration of function and resolution of lung infiltrates. Conclusion In case of a suspicious and/or progressive swelling a definite diagnosis should be achieved by biopsy within a short time to enable a proper treatment. If scar sarcoidosis is proven further investigation is necessary to exclude a systemical involvement. A surgical treatment of the swelling is not indicated.

  3. Scar sarcoidosis on a finger mimicking a rapidly growing soft tissue tumour: a case report.

    Science.gov (United States)

    Henrichs, Marcel-Philipp; Streitbürger, Arne; Gosheger, Georg; Surke, Carsten; Dierkes, Christian; Hardes, Jendrik

    2012-10-02

    Scar sarcoidosis is a rare and uncommon but specific cutaneous manifestation of sarcoidosis. In general it arises in pre-existing scars deriving from mechanical traumas. As most surgeons dealing with scars might not be aware of cutaneous sarcoidosis and its different types of appearance the appropriate staging and treatment might be missed or at least delayed. To our knowledge this is the first case in literature of scar sarcoidosis on a finger. We present a case of a 33-year-old carpenter who developed scar sarcoidosis on his right index finger 4 years after the tendon of the long digital flexor got accidentally cut by an angle grinder. He was referred due to a swelling of the finger suspected to be a malignant soft tissue tumour. The circumference of the affected finger had almost doubled, adding up to 94 mm. Incision biopsy revealed typical noncaseating granulomas. Further investigation showed a systemic extent of the disease with involvement of the lung. A systemic treatment with oral steroids led to an almost full regression of the swelling with restoration of function and resolution of lung infiltrates. In case of a suspicious and/or progressive swelling a definite diagnosis should be achieved by biopsy within a short time to enable a proper treatment. If scar sarcoidosis is proven further investigation is necessary to exclude a systemical involvement. A surgical treatment of the swelling is not indicated.

  4. Soft magnetic properties of rapidly quenched pig-iron-based alloys

    Science.gov (United States)

    Chakrabarti, P. K.; Mazaleyrat, F.; Varga, L. K.

    2003-01-01

    A family of rapidly quenched alloys based on pig iron (PI) having 6-10 at% additions (B, Ge, Ga,Al) has been found. In spite of small crystalline fraction, the best sample has the interesting values of resistivity, saturation polarization and magnetostriction of 129 μΩ cm , 1.59 T and 1.3 ppm, respectively. The AC power losses of these alloys were found comparable with those of the commercial glassy alloys.

  5. Rapid, non-destructive selection of peanuts for high aflatoxin content by soaking and tandem mass spectrometry.

    Science.gov (United States)

    Schatzki, Thomas F; Haddon, William F

    2002-05-08

    Peanut lots are subject to aflatoxin levels high enough to cause concern to health agencies and trade channels. A possible solution would be to mechanically sort out high aflatoxin nuts from the process stream. Only highly contaminated nuts would need to be removed. However, there exists at present no sorting mechanism which meets commercial needs of adequate reduction and product preservation. To build such a sorter requires knowledge of the properties that can be used for sorting. The first step in the design is to select on the order of one hundred undamaged contaminated nuts which can be compared with noncontaminated ones. Because contaminated nuts are rare, a very large number of nuts needs to be examined nondestructively. We present a method to rapidly carry out such a selection. The method is based on dipping nuts into extraction fluid and examining the resulting fluid by tandem MS without preliminary cleanup. This method has been applied to examine over 65,000 nuts, yielding approximately 120 nuts, each containing more than 250-43000 ng/g aflatoxin (depending on process stream).

  6. Rapid and non-destructive analysis of metallic dental restorations using X-ray fluorescence spectra and light-element sampling tools

    Science.gov (United States)

    Furuhashi, K.; Uo, M.; Kitagawa, Y.; Watari, F.

    2012-12-01

    IntroductionRecently, allergic diseases caused by dental metals have been increasing. Therefore, rapid and accurate analytical methods for the metal restorations in the oral cavities of patients are required. The purpose of this study was to develop a non-destructive extraction method for dental alloys, along with a subsequent, rapid and accurate elemental analysis. Materials and methodSamples were obtained by polishing the surfaces of metal restorations using a dental rotating tool with disposable buffs and polishing pastes. As materials for the analysis, three dental alloys were used. To compare the sampling and analysis efficiencies, two buffs and seven pastes were used. After polishing the surface of a metal restoration, the buff was analyzed using X-ray scanning analytical microscopy (XSAM). ResultsThe efficiency of the analysis was judged based on the sampling rate achieved and the absence of disturbing elements in the background in fluorescence X-ray spectra. The best results were obtained for the combination of TexMet as a buff with diamond as a paste. This combination produced a good collection efficiency and a plain background in the fluorescence X-ray spectra, resulting in a high precision of the analysis.

  7. Coupling non-destructive DNA extraction and voucher retrieval for small soft-bodied Arthropods in a high-throughput context: the example of Collembola.

    Science.gov (United States)

    Porco, David; Rougerie, Rodolphe; Deharveng, Louis; Hebert, Paul

    2010-11-01

    Here, we describe a simple method adapted for high-throughput protocols allowing voucher specimen recovery for Collembola and by extension for other soft-bodied small arthropods. A standard extraction protocol was tested to examine the effects of lysis duration (1, 2, 4, 12 h) on DNA concentration, amplification success and specimen condition. Good quality DNA was obtained after 1 h of lysis, while voucher condition was fine for up to 12 h. The lysis step substantially shortens the clearing process necessary for morphological examination. © 2010 Blackwell Publishing Ltd.

  8. A rapid, non-destructive methodology to monitor activity of sulfide-induced corrosion of concrete based on H2S uptake rate.

    Science.gov (United States)

    Sun, Xiaoyan; Jiang, Guangming; Bond, Philip L; Wells, Tony; Keller, Jurg

    2014-08-01

    Many existing methods to monitor the corrosion of concrete in sewers are either very slow or destructive measurements. To overcome these limitations, a rapid, non-invasive methodology was developed to monitor the sulfide-induced corrosion process on concrete through the measurement of the H2S uptake rates of concrete at various corrosion stages. The H2S uptake rate for a concrete coupon was determined by measuring the gaseous H2S concentrations over time in a temperature- and humidity-controlled gas-tight reactor. The reliability of this method was evaluated by carrying out repeated tests on different concrete coupons previously exposed to 50 ppm of H2S, at 30 °C and 100% relative humidity for over 32 months. The H2S uptake measurements showed good reproducibility. It was also shown that a severely corroded coupon exhibited higher sulfide uptake rates than a less corroded coupon. This could be explained by the corrosion layer in the more corroded coupon having a higher biological sulfide oxidation activity than the less corroded coupon. Additionally, temperature changes had a stronger effect on the uptake rate of the heavily corroded coupon compared to the less corroded coupon. A corrosion rate of 8.9 ± 0.5 mm/year, estimated from the H2S uptake results, agreed well with the corrosion rate observed in real sewers under similar conditions. The method could be applied to investigate important factors affecting sulfide-induced concrete corrosion, particularly temperature, fluctuating gaseous H2S concentrations, oxygen concentrations, surface pH and relative humidity. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Opto-thermal transient emission radiometry for rapid, non-destructive and non-contact determination of hydration and hydration depth profile in the skin of a grape

    NARCIS (Netherlands)

    Guo, X.; Bicanic, D.D.; Keijser, K.; Imhof, R.

    2003-01-01

    .The concept of optothermal transient emission radiometry at a wavelength of 2.94 µm was applied to non-destructively determine the level of hydration and the profile of hydration in the skin of intact fresh grapes taken from top and bottom sections of the same bunch.

  10. The use of immunochromatographic rapid test for soft tissue remains identification in order to distinguish between human and non-human origin.

    Science.gov (United States)

    Gascho, Dominic; Morf, Nadja V; Thali, Michael J; Schaerli, Sarah

    2017-05-01

    Clear identification of soft tissue remains as being of non-human origin may be visually difficult in some cases e.g. due to decomposition. Thus, an additional examination is required. The use of an immunochromatographic rapid tests (IRT) device can be an easy solution with the additional advantage to be used directly at the site of discovery. The use of these test devices for detecting human blood at crime scenes is a common method. However, the IRT is specific not only for blood but also for differentiation between human and non-human soft tissue remains. In the following this method is discussed and validated by means of two forensic cases and several samples of various animals. Copyright © 2017 The Chartered Society of Forensic Sciences. Published by Elsevier B.V. All rights reserved.

  11. Reversible Destruction of Dynamical Localization

    OpenAIRE

    Lignier, Hans; Chabé, Julien; Delande, Dominique; Garreau, Jean Claude; Szriftgiser, Pascal

    2005-01-01

    4 pages, 2 eps figures (color); Dynamical localization is a localization phenomenon taking place, for example, in the quantum periodically-driven kicked rotor. It is due to subtle quantum destructive interferences and is thus of intrinsic quantum origin. It has been shown that deviation from strict periodicity in the driving rapidly destroys dynamical localization. We report experimental results showing that this destruction is partially reversible when the deterministic perturbation that des...

  12. Room temperature DNA preservation of soft tissue for rapid DNA extraction: an addition to the disaster victim identification investigators toolkit?

    Science.gov (United States)

    Graham, E A M; Turk, E E; Rutty, G N

    2008-01-01

    In mass fatality incidents, for example following a vehicle accident or terrorist event, severe fragmentation of bodies may occur, making identification by the use of traditional techniques such as fingerprinting or odontology difficult. In such situations DNA profiling can be employed for individualization and re-association of fragmented remains. As at times disrupted soft tissue may be the predominate tissue type requiring identification and re-association. We have investigated the use of two buffer solutions for preservation of soft tissue samples that may be collected during such investigations, when buccal cells, blood samples or teeth or bone may not be available. Both buffer solutions have shown sufficient DNA preservation over a 12-month period of storage at room temperature to allow for DNA profiling to be successfully performed when 5-1000 mg muscle tissue was stored in each solution.

  13. UM EXPERIMENTO RELATIVAMENTE SIMPLES E RÁPIDO DE CINÉTICA DA DESTRUIÇÃO DE LEVEDURAS PELO CALOR A RELATIVITY SIMPLE AND RAPID METHOD OF THERMAL DESTRUCTION OF YEATS CELLS

    Directory of Open Access Journals (Sweden)

    Walter BORZANI

    1998-10-01

    Full Text Available Descreve-se um experimento simples e rápido que permite calcular a constante de velocidade de destruição térmica de leveduras (fermento prensado a uma temperatura na faixa de 55ºC a 60°C, e estudar a influência de fatores nessa constante.A simple and rapid method that permits to evaluate the rate constant of thermal destruction of yeast cells (pressed yeast at a temperature between 55ºC and 60ºC, and also to study the influence of experimental conditions on the above rate constant, is described.

  14. On operations of soft sets

    National Research Council Canada - National Science Library

    Sezgin, Aslıhan; Atagün, Akın Osman

    2011-01-01

    ... called soft set theory is free from the difficulties affecting existing methods. In soft set theory, the problem of setting the membership function does not arise, which makes the theory easily applied to many different fields. Works on soft set theory has been progressing rapidly since Maji et al.  [8] introduced several operations of soft set...

  15. EXCIMER-LASER ABLATION OF SOFT-TISSUE - A STUDY OF THE CONTENT OF RAPIDLY EXPANDING AND COLLAPSING BUBBLES

    NARCIS (Netherlands)

    van Leeuwen, T. G.; Jansen, E. D.; Motamedi, M.; Welch, A. J.; Borst, C.

    1994-01-01

    Both holmium (lambda = 2.09 mum) and excimer (lambda = 308 nm) lasers are used for ablation of tissue. In a previous study, excimer laser ablation of aorta produced rapidly expanding and collapsing vapor bubbles. To investigate whether the excimer-induced bubble is caused by vaporization of (tissue)

  16. Development of a droplet digital polymerase chain reaction for rapid and simultaneous identification of common foodborne pathogens in soft cheese

    Directory of Open Access Journals (Sweden)

    Paola Cremonesi

    2016-10-01

    Full Text Available Dairy products can harbor various microorganisms (e.g., Campylobacter spp., Salmonella spp., Listeria monocytogenes, verocytotoxin-producing Escherichia coli arising from animal reservoirs, and which can become important sources of foodborne illness. Therefore, early detection of food pathogens is crucial to prevent diseases. We wished to develop an accurate quantitative protocol based on a droplet digital polymerase chain reaction (ddPCR involving eight individual TaqMan™ reactions to detect simultaneously, without selective enrichment, Listeria spp., L. monocytogenes, Salmonella spp., verocytotoxin-producing E. coli and Campylobacter spp. in cheese. ddPCR (a third-generation PCR provides absolute quantification of target DNAs without requirement of a standard curve, which simplifies experimentation and data comparability. The accuracy, specificity and sensitivity of the developed ddPCR system were assessed using purified DNA from 50 reference pathogenic and non-pathogenic strains from international or Italian collections and analyzing soft cheese samples artificially contaminated with serial dilutions (from 4×106 to 4×101 CFU/g of pure cultures from the American Type Culture Collection.Finally, the performance of our ddPCR system was compared by parallel testing with quantitative PCR: it gave higher sensitivity (102 CFU/g for the Listeria spp. assay without the necessity of a standard curve.In conclusion, this is the first ddPCR system developed for simultaneous detection of common foodborne pathogens in cheese using a single set of amplification conditions. As such, it could become a useful strategy for high-throughput screening of microorganisms to evaluate the quality and safety of food products.

  17. Development of a Droplet Digital Polymerase Chain Reaction for Rapid and Simultaneous Identification of Common Foodborne Pathogens in Soft Cheese.

    Science.gov (United States)

    Cremonesi, Paola; Cortimiglia, Claudia; Picozzi, Claudia; Minozzi, Giulietta; Malvisi, Michela; Luini, Mario; Castiglioni, Bianca

    2016-01-01

    Dairy products can harbor various microorganisms (e.g., Campylobacter spp., Salmonella spp., Listeria monocytogenes, verocytotoxin-producing Escherichia coli) arising from animal reservoirs, and which can become important sources of foodborne illness. Therefore, early detection of food pathogens is crucial to prevent diseases. We wished to develop an accurate quantitative protocol based on a droplet digital polymerase chain reaction (ddPCR) involving eight individual TaqMan™ reactions to detect simultaneously, without selective enrichment, Listeria spp., L. monocytogenes, Salmonella spp., verocytotoxin-producing E. coli and Campylobacter spp. in cheese. ddPCR (a "third-generation PCR") provides absolute quantification of target DNAs without requirement of a standard curve, which simplifies experimentation and data comparability. The accuracy, specificity and sensitivity of the developed ddPCR system were assessed using purified DNA from 50 reference pathogenic and non-pathogenic strains from international or Italian collections and analyzing soft cheese samples artificially contaminated with serial dilutions (from 4 × 106 to 4 × 101 CFU/g) of pure cultures from the American Type Culture Collection. Finally, the performance of our ddPCR system was compared by parallel testing with quantitative PCR: it gave higher sensitivity (102 CFU/g for the Listeria spp. assay) without the necessity of a standard curve. In conclusion, this is the first ddPCR system developed for simultaneous detection of common foodborne pathogens in cheese using a single set of amplification conditions. As such, it could become a useful strategy for high-throughput screening of microorganisms to evaluate the quality and safety of food products.

  18. Rapid creation and destruction of sedimentary basins on mature strike-slip faults: an example from the offshore Alpine Fault, New Zealand

    Science.gov (United States)

    Barnes, Philip M.; Sutherland, Rupert; Davy, Bryan; Delteil, Jean

    2001-11-01

    Seismic reflection profiles and multibeam bathymetric data are integrated to analyse the structure of the 25 km-long strike-slip Dagg Basin associated with the marine section of the Alpine Fault, Fiordland, New Zealand. The basin is developing in almost 3000 m water depth at a releasing bend, whilst contemporaneous transpression results in inversion of its southern end. Fiord-derived glacio-marine sediments flooded the basin during the last glaciation, and provide a stratigraphic framework for structural analysis. Geometrical analysis enables an estimation of 450-1650 m of dextral displacement on the Alpine Fault at the releasing bend since the development of an unconformity estimated to have formed at between 30 and 110 ka. This implies a dextral slip rate ranging from a possible minimum of 4 mm/yr to the maximum of 35 mm/yr constrained by the Pacific-Australian plate motion rate. Despite total dextral displacement of 480 km on the Alpine Fault zone and a growth history spanning 15-20 Myr, this geomorphically well expressed and structurally complex strike-slip basin developed and evolved rapidly during the late Pleistocene, and thus represents only the latest phase in the evolution of the Alpine Fault. Upward splaying structures within the fault zone exhibit a rapid spatial evolution in Pleistocene strata, which may reflect the interactions between high fault slip rate, voluminous sedimentation supply, inherited structural complexities in the basement rocks and deeper cover sequence, and interactions between adjacent faults. The present through-going releasing bend at the northern end of the basin may have evolved from a more complex pull-apart basin that developed between separate segments of the Alpine Fault. The results from Dagg Basin illustrate the rates at which structural complexities and sedimentary basins can develop within highly active, very mature, through-going continental wrench faults. Strike slip basins on the scale of 40-80 km 2 on such faults may

  19. Comparing culture and molecular methods for the identification of microorganisms involved in necrotizing soft tissue infections

    DEFF Research Database (Denmark)

    Rudkjøbing, Vibeke Børsholt; Thomsen, Trine Rolighed; Xu, Yijuan

    2016-01-01

    BACKGROUND: Necrotizing soft tissue infections (NSTIs) are a group of infections affecting all soft tissues. NSTI involves necrosis of the afflicted tissue and is potentially life threatening due to major and rapid destruction of tissue, which often leads to septic shock and organ failure. The gold...... that clinicians should be prepared to diagnose and treat any combination of microbial pathogens. Some of the tested molecular methods offer a faster turnaround time combined with a high specificity, which makes supplemental use of such methods attractive for identification of microorganisms, especially...

  20. A new rapid and non-destructive method to detect tephra layers and cryptotephras: applying to the first distal tephrostratigraphic record of the Chaîne des Puys volcanic field (France).

    Science.gov (United States)

    Jouannic, Gwénolé; Walter-Simonnet, Anne-Véronique; Bossuet, Gilles; Delabrousse, Eric; Cubizolle, Hervé

    2014-05-01

    Tephrostratigraphy has been considerably developed for 30 years, mainly in palaeo-environmental studies. In such studies, distal tephra layers are important chronological markers, but they are also tools to establish or specify record of past eruptions of a volcanic field. Nowadays, development of effective rapid methods to detect tephra layers in sedimentary records of various compositions is a challenge. Many classic methods for detection of tephra layers, like regular sampling or magnetic susceptibility measurements, have shown their limits. Regular sampling takes a long time, and finding tephra layers remains uncertain. Moreover, magnetic susceptibility maesurements, although it is a non-destructive method, is ineffective when tephra layers are made of volcanic glass shards with differentiated magma composition. X-ray fluorescence (XRF) is also a non-destructive method but it takes a very long time to analyze a core with sufficient high resolution, and measurements only concern the surface of the sediment. We propose a new method allows detection of tephra layers with, for the first time, a 3D resolution: the Computed Tomography Scan (CT- Scan). This method, regularly used in medicine, allows there to obtain pictures of materials density on 3D with inframillimetric measurement ranges. Then, it is possible to detect tephras, cryptotephras (invisible by naked eye), reworked tephra layers even when tephra layers don't outcrop at the surface of the sediment (and are therefore undetectable by usual methods like XRF and magnetic susceptibility). This method has been tried out on tephras sedimented in different types of sediments (silicated, carbonated and organic matter). Our results show that this method is very efficient for peaty environment. Used on coring carried out in Forez Mountains (French Massif Central), CT-Scan allows to detect more tephra layers than usual methods (XRF and magnetic susceptibility). Results presented here allow to build the first

  1. Non-destructive testing

    Energy Technology Data Exchange (ETDEWEB)

    Hull, B.; John, V.

    1988-01-01

    This text covers, the underlying principles and some major applications of non-destructive inspection methods. Complete chapters are devoted to each of the following: liquid penetration inspection, magnetic particle inspection, electrical testing, ultrasonic testing and radiography. The concluding chapter introduces the reader to some of the more recent developments in non-destructive inspection.

  2. Destructiveness in Political Discourse

    Directory of Open Access Journals (Sweden)

    Яна Александровна Волкова

    2016-12-01

    Full Text Available Destructiveness is among the fundamental discourse categories that play a significant role in the organization of communicative interaction and define the pragmatics of discourse; its study helps to understand some mechanisms and principles of communication, identify strategies and tactics used by a destructive communicative personality. The relevance of this study is determined by the increasing aggressiveness in various types of discourse, and, accordingly, by the need to extend the knowledge of destructive behavior of a communicative personality. The study is based on the theory of discourse-analysis and theory of destructiveness (Z. Harris, T. van Dijk, A. Buss, E. Fromm, D. Ponton, K. Hacker, R. Wodak. N. Arutyunova, V. Karasik, M. Makarov, E. Sheigal et al. Developing the theory of destructiveness and relying on Erich Fromm’s research (1973, we specify the concept of “destructiveness” in relation to the political discourse and compare it with the related concept of aggressiveness. The paper analyses the category of destructiveness in modern US political discourse, using excerpts from the speeches of the candidates for presidency of 2016. Particular attention is paid to the dominant destructive intention - to harm the reputation of the opponent and reduce his political chances, as well as to the functions of verbal aggression: on the one hand - to discredit the opponent, bring accusations, on the other hand - to poison the audience mind against him/her and arouse the feeling of danger posed by a political opponent. The analysis of verbal and nonverbal means of destructiveness in the US political discourse is carried out. The article concludes that abusive remarks of politicians do not result from spontaneous emotional outburst, but from an elaborated destructive strategy where the agonistic nature of political discourse stipulates the use of instrumental aggression (Buss, 1971 for the sake of the conquest of power, lowering the

  3. European Journal of Cancer's Biennial report on soft tissue and visceral sarcomas or the rapid evolution of treatment concepts in sarcomas.

    Science.gov (United States)

    Blay, Jean-Yves; Brahmi, Mehdi; Ray-Coquard, Isabelle

    2017-01-01

    Soft tissue and visceral sarcoma gather a large group of rare to very rare cancers and locally aggressive connective tissue tumours. Novel concepts on histological and molecular classification, optimal management of patients, systemic adjuvant and neoadjuvant treatment have been emerging in the last 5 years. In the present publication, we review and summarise significant changes which impact on disease management in this group of rare cancers. Copyright © 2016. Published by Elsevier Ltd.

  4. Development and application of a rapid rehabilitation system for reconstruction of maxillofacial soft-tissue defects related to war and traumatic injuries.

    Science.gov (United States)

    Bai, Shi-Zhu; Feng, Zhi-Hong; Gao, Rui; Dong, Yan; Bi, Yun-Peng; Wu, Guo-Feng; Chen, Xi

    2014-01-01

    The application of a maxillofacial prosthesis is an alternative to surgery in functional-aesthetic facial reconstruction. Computer aided design/computer aided manufacturing has opened up a new approach to the fabrication of maxillofacial prostheses. An intelligentized rapid simulative design and manufacturing system for prostheses was developed to facilitate the prosthesis fabrication procedure. The rapid simulation design and rapid fabrication system for maxillofacial prostheses consists of three components: digital impression, intelligentized prosthesis design, and rapid manufacturing. The patients' maxillofacial digital impressions were taken with a structured-light 3D scanner; then, the 3D model of the prostheses and their negative molds could be designed with specific software; lastly, with resin molds fabricated by the rapid prototyping machine, the prostheses could be produced directly and quickly. Fifteen patients with maxillofacial defects received prosthesis rehabilitation provided by the established system. The total clinical time used for each patient was only 4 hours over 2 appointments on average. The contours of the prostheses coordinated properly with the appearance of the patients, and the uniform-thickness border sealed well to adjacent tissues. All of the patients were satisfied with their prostheses. The rapid simulative rehabilitation system of maxillofacial defects is approaching completion. It could provide an advanced technological solution for the Army in cases of maxillofacial defect rehabilitation.

  5. Destructive Staffroom Discourse

    Directory of Open Access Journals (Sweden)

    Jonathan Pitt

    2009-01-01

    Full Text Available Holt’s first book “How Children Fail” set in motion the education reform of the 1960s. Holt illuminated the plethora of problems in ‘cookie-cutter’ mainstream schools, such as the culture of the fear of failure. This qualitative study examines the concept of the “Destructive Staffroom Discourse” in mainstream elementary schools as an impairment to the atmosphere necessary for learning to occur.

  6. [Vertebral destruction with sever pain in the SAPHO syndrome].

    Science.gov (United States)

    Hagemann, D; Pfaffenbach, B; Schmid, G; Adamek, R J

    1999-02-05

    A 57-year-old man had for the past 18 months complained of recurrent, recently worsening, belt-like backache radiating ventrally. On admission a skin rash consisting of blister and pustules was noted on the palms of both hands. He had pain on pressure over the right upper abdomen, an enlarged prostate and definite pain on percussing the vertebral column with restricted movement of the thoracic vertebral column, but no other physical signs. Radiology revealed clearly increased sclerosis of several thoracic vertebrae with osteolytic destruction and a paravertebral soft tissue tumor. Search for a primary tumor was unsuccessful. Bone scintigraphy demonstrated nuclide enrichment of the thoracic vertebrae and of the sternoclavicular joints without increase in the LeukoScan. These findings indicated the diagnosis of SAPHO syndrome (synovitis-acne-pustulosis-hyperostosis-osteomyelitis). Rapid subjective and objective improvement followed the administration of clindamycin and ibuprofen. In case of bone pain of uncertain aetiology, especially when associated with skin rash, the rare SAPHO syndrome should be considered in the differential diagnosis, avoiding lengthy diagnostic steps and allowing early treatment.

  7. Destruction Chemistry of Mustard Simulants

    Science.gov (United States)

    2008-07-04

    organosulfur compounds under both pyrolytic and oxidative conditions. We focus on the destruction of alkyl sulfides that are surrogates for chemical... organosulfur , oxidation, pyrolysis, chemical kinetic mechanism, thermochemistry, reaction, kinetics, flow reactor, GC/MS, FTIR, mustard agent simulant, CWA...destruction chemistry of organosulfur compounds under both pyrolytic and oxidative conditions. We focus on the destruction of alkyl sulfides that are

  8. Destructive membranous periodontal disease (ligneous periodontitis): a case report and 3 years follow-up.

    Science.gov (United States)

    Baykul, T; Bozkurt, Y

    2004-10-23

    Destructive membranous periodontal disease is a rare, destructive and poorly defined entity, which is the part of a systemic disease due to plasminogen deficiency and fibrin deposition. The disease is characterised by gingival enlargement and periodontal tissue destruction that leads to rapid tooth loss despite treatment attempts. Biopsy is essential to rule out other periodontal disease in the differential diagnosis.

  9. Genetic diversity of Iranian potato soft rot bacteria based on ...

    African Journals Online (AJOL)

    Bacterial soft rot diseases caused by Pectobacterium-Dickeya complex are the most important and yield losses diseases of potato crop worldwide. Loss due to these diseases in some years/fields under Iran condition is huge and destructive. To screen and characterize the causal agents, thirty bacterial soft rot isolates ...

  10. Soft Lenses*

    African Journals Online (AJOL)

    Polyhema. Low water content-30 - 40% therefore less well tolerated. Impermeable to gases. Low elasticity and therefore optics not good. Subject to stress and strain especially when drying. Easily infected. A series of cases fitted with Bionite soft lenses is described. Good results were obtained in bullous kera- topathy, dry.

  11. Soft Clouding

    DEFF Research Database (Denmark)

    Søndergaard, Morten; Markussen, Thomas; Wetton, Barnabas

    2012-01-01

    Soft Clouding is a blended concept, which describes the aim of a collaborative and transdisciplinary project. The concept is a metaphor implying a blend of cognitive, embodied interaction and semantic web. Furthermore, it is a metaphor describing our attempt of curating a new semantics of sound...... brought together in one transdisciplinary process of curating a semantics of sound: Technological, Humanistic /Curatorial, and Design / Action-based practice....

  12. Soft Clouding

    DEFF Research Database (Denmark)

    Søndergaard, Morten; Markussen, Thomas; Wetton, Barnabas

    2012-01-01

    Soft Clouding is a blended concept, which describes the aim of a collaborative and transdisciplinary project. The concept is a metaphor implying a blend of cognitive, embodied interaction and semantic web. Furthermore, it is a metaphor describing our attempt of curating a new semantics of sound a...... brought together in one transdisciplinary process of curating a semantics of sound: Technological, Humanistic /Curatorial, and Design / Action-based practice....

  13. Advances in Soft Matter Mechanics

    CERN Document Server

    Li, Shaofan

    2012-01-01

    "Advances in Soft Matter Mechanics" is a compilation and selection of recent works in soft matter mechanics by a group of active researchers in the field. The main objectives of this book are first to disseminate the latest developments in soft matter mechanics in the field of applied and computational mechanics, and second to introduce soft matter mechanics as a sub-discipline of soft matter physics. As an important branch of soft matter physics, soft matter mechanics has developed rapidly in recent years. A number of the novel approaches discussed in this book are unique, such as the coarse grained finite element method for modeling colloidal adhesion, entropic elasticity, meshfree simulations of liquid crystal elastomers, simulations of DNA, etc. The book is intended for researchers and graduate students in the field of mechanics, condensed matter physics and biomaterials. Dr. Shaofan Li is a professor of the University of California-Berkeley, U.S.A; Dr. Bohua Sun is a professor of Cape Peninsula Universit...

  14. Innovation in Non Destructive Testing

    NARCIS (Netherlands)

    Wassink, C.H.P.

    2012-01-01

    In many established companies the pace of innovation is low. The Non-Destructive Testing sector is an example of a sector where the pace of innovation is very slow. Non-Destructive Testing (NDT) refers to the set of non-invasive activities used to determine the condition of objects or installations

  15. Soft Robotics Week

    CERN Document Server

    Rossiter, Jonathan; Iida, Fumiya; Cianchetti, Matteo; Margheri, Laura

    2017-01-01

    This book offers a comprehensive, timely snapshot of current research, technologies and applications of soft robotics. The different chapters, written by international experts across multiple fields of soft robotics, cover innovative systems and technologies for soft robot legged locomotion, soft robot manipulation, underwater soft robotics, biomimetic soft robotic platforms, plant-inspired soft robots, flying soft robots, soft robotics in surgery, as well as methods for their modeling and control. Based on the results of the second edition of the Soft Robotics Week, held on April 25 – 30, 2016, in Livorno, Italy, the book reports on the major research lines and novel technologies presented and discussed during the event.

  16. Quasi-simultaneous acquisition of hard electron ionization and soft single-photon ionization mass spectra during GC/MS analysis by rapid switching between both ionization methods: analytical concept, setup, and application on diesel fuel.

    Science.gov (United States)

    Eschner, Markus S; Gröger, Thomas M; Horvath, Thomas; Gonin, Marc; Zimmermann, Ralf

    2011-05-15

    This work describes the realization of rapid switching between hard electron ionization (EI) and soft single-photon ionization (SPI) integrated in a compact orthogonal acceleration time-of-flight mass spectrometer. Vacuum-ultraviolet (VUV) photons of 9.8 eV (126 nm) emitted from the innovative electron-beam-pumped rare-gas excimer light source (EBEL) filled with argon are focused into the ion chamber by an ellipsoidal mirror optic for accomplishing of SPI. This novel orthogonal acceleration time-of-flight mass spectrometer with switching capability was hyphenated to one-dimensional gas chromatography (GC) and comprehensive two-dimensional (2D) gas chromatography (GC × GC) for the first time. Within this demonstration study, a maximum switching frequency of 80 Hz was applied for investigation of a mineral-oil-type diesel sample. This approach allows the quasi-simultaneous acquisition of complementary information about the fragmentation pattern (EI) as well as the molecular mass (SPI) of compounds within a single analysis. Furthermore, by application of a polar GC column for separation, the SPI data can be displayed in a 2D contour plot, leading to a comprehensive 2D characterization (GC × MS), whereas the typical group-type assignment for diesel is also met.

  17. A rapid shaking-based ionic liquid dispersive liquid phase microextraction for the simultaneous determination of six synthetic food colourants in soft drinks, sugar- and gelatin-based confectionery by high-performance liquid chromatography.

    Science.gov (United States)

    Wu, Hao; Guo, Jing-Bo; Du, Li-Ming; Tian, Hong; Hao, Cheng-Xuan; Wang, Zhi-Feng; Wang, Jie-Yan

    2013-11-01

    A novel and simple rapid shaking-based method of ionic liquid dispersive liquid phase microextraction for the determination of six synthetic food colourants (Tartrazine, Amaranth, Sunset Yellow, Allura Red, Ponceau 4R, and Erythrosine) in soft drinks, sugar- and gelatin-based confectionery was established. High-performance liquid chromatography coupled with an ultraviolet detector was used for the determinations. The extraction procedure did not require a dispersive solvent, heat, ultrasonication, or additional chemical reagents. 1-Octyl-3-methylimidazolium tetrafluoroborate ([C8MIM][BF4]) was dispersed in an aqueous sample solution as fine droplets by manual shaking, enabling the easier migration of analytes into the ionic liquid phase. Factors such as the [C8MIM][BF4] volume, sample pH, extraction time, and centrifugation time were investigated. Under the optimum experimental conditions, the proposed method showed excellent detection sensitivity with limits of detection (signal-to-noise ratio=3) within 0.015-0.32 ng/mL. The method was also successfully used in analysing real food samples. Good spiked recoveries from 95.8%-104.5% were obtained. Copyright © 2013 Elsevier Ltd. All rights reserved.

  18. Chlorophyll destruction in the presence of bisulfite. [Spinach oleracea

    Energy Technology Data Exchange (ETDEWEB)

    Peiser, G.; Yang, S.F.

    1985-01-01

    Chlorophyll extracted from Spinacia oleracea leaves as well as purified chlorophyll a in ethanolic solutions (pH 4) was rapidly destroyed, as measured by a decrease in absorbance, in the presence of sodium bisulfite, oxygen and light. Omission of sodium bisulfite, oxygen or light resulted in negligible destruction. The light requirement could be partially substituted by addition of manganous sulfate and destruction was further stimulated in the presence of linoleic acid. Hydroquinone, a free radical scavenger, inhibited both light and Mn/sup 2 +/-mediated (dark) destruction. These results suggest that free radicals produced during the aerobic oxidation of bisulfite are involved in the destruction of chlorophyll. When /sub 35/S-bisulfite was used, two labeled degradation products of chlorophyll were observed.

  19. Multiaspect Soft Sets

    Directory of Open Access Journals (Sweden)

    Nor Hashimah Sulaiman

    2013-01-01

    Full Text Available We introduce a novel concept of multiaspect soft set which is an extension of the ordinary soft set by Molodtsov. Some basic concepts, operations, and properties of the multiaspect soft sets are studied. We also define a mapping on multiaspect soft classes and investigate several properties related to the images and preimages of multiaspect soft sets.

  20. Temperature dynamics of soft tissues during diode laser cutting by different types of fiber opto-thermal converters

    Science.gov (United States)

    Belikov, Andrey V.; Skrypnik, Alexei V.; Smirnov, Sergey N.; Semyashkina, Yulia V.

    2017-03-01

    The results of in vitro study of the soft tissue temperature dynamics during 980 nm diode laser cutting by different types (CLEAR, FILM, VOLUMETRIC) of fiber opto-thermal converters (FOTC) are presented. It was found that the use of CLEAR fiber end (tip) at the laser power below 8.5 W doesn't lead to the soft tissue (chicken meat) destruction. The chicken meat destruction (cutting) begins when irradiated by 8.5 W laser radiation for approximately 9.0 s. At the power of 9.0 W this time decreases up to 7.0 s, at 9.5 W - to 6.0 s, at 10.0 W - to 3.5 s. The moment of soft tissue cutting start correlates with the moment of black layer (absorber) formation at the fiber end and appearance of visually identifiable laser cut walls on the photos; the temperature in this case rapidly increases up to 850 °C. It was determined that the FILM FOTC begins to cut the soft tissue immediately after exposure of laser radiation with power of 4.0 W, the temperature in this case reaches 900 °C. It was determined that the VOLUMETRIC FOTC begins to cut the tissue immediately after exposure at the power of 1.0 W, the temperature in this case reaches 600 °C. VOLUMETRIC FOTC can produce more effective cuts of the soft tissue at the laser power of 4.0 W, in this case, the temperature is above 1200 °C.

  1. Fuzzy Soft Sets and Fuzzy Soft Lattices

    National Research Council Canada - National Science Library

    Shao, Yingchao; Qin, Keyun

    2012-01-01

    .... In this paper, the notion of fuzzy soft lattice is defined and some related properties are derived, which extends the notion of a fuzzy lattice to include the algebraic structures of soft sets...

  2. The destructive index and early lung destruction in smokers.

    Science.gov (United States)

    Eidelman, D H; Ghezzo, H; Kim, W D; Cosio, M G

    1991-07-01

    The destructive index (DI), a measure of alveolar septal damage and emphysema, has been proposed as a sensitive index of lung destruction that closely reflects functional abnormalities, especially loss of elastic recoil. To better understand the progression of lung destruction in smokers, we studied the contribution of its principal components: breaks in the alveolar septa (DIb) and the presence of emphysematous spaces (DIe), and compared them to the mean linear intercept (Lm) and DI as originally described. To do this we employed lungs obtained at autopsy from non-smokers and smokers. Lungs were selected by emphysema score (ES) so that all cases were emphysema free (nonsmokers and seven smokers) or had minimal emphysema (nine smokers; ES = 5). Of these indices, only DIb was significantly increased in the lungs of smokers: 17.8 +/- 1.2 versus 12.4 +/- 1.6, p less than 0.05. We also investigated the regional distribution of destruction by comparing results in upper and lower lobes. DIe, but not DIb, was significantly increased in upper lobes of smokers. These data support the notion that increases in DI in the lungs of smokers that occur before increases in Lm or ES reflect the presence of alveolar septal breaks and highlight the importance of alveolar septal destruction as a precursor to the development of airspace enlargement in the lungs of cigarette smokers.

  3. Craton destruction and related resources

    Science.gov (United States)

    Zhu, Rixiang; Zhang, Hongfu; Zhu, Guang; Meng, Qingren; Fan, Hongrui; Yang, Jinhui; Wu, Fuyuan; Zhang, Zhiyong; Zheng, Tianyu

    2017-10-01

    Craton destruction is a dynamic event that plays an important role in Earth's evolution. Based on comprehensive observations of many studies on the North China Craton (NCC) and correlations with the evolution histories of other cratons around the world, craton destruction has be defined as a geological process that results in the total loss of craton stability due to changes in the physical and chemical properties of the involved craton. The mechanisms responsible for craton destruction would be as the follows: (1) oceanic plate subduction; (2) rollback and retreat of a subducting oceanic plate; (3) stagnation and dehydration of a subducting plate in the mantle transition zone; (4) melting of the mantle above the mantle transition zone caused by dehydration of a stagnant slab; (5) non-steady flow in the upper mantle induced by melting, and/or (6) changes in the nature of the lithospheric mantle and consequent craton destruction caused by non-steady flow. Oceanic plate subduction itself does not result in craton destruction. For the NCC, it is documented that westward subduction of the paleo-Pacific plate should have initiated at the transition from the Middle-to-Late Jurassic, and resulted in the change of tectonic regime of eastern China. We propose that subduction, rollback and retreat of oceanic plates and dehydration of stagnant slabs are the main dynamic factors responsible for both craton destruction and concentration of mineral deposits, such as gold, in the overriding continental plate. Based on global distribution of gold deposits, we suggest that convergent plate margins are the most important setting for large gold concentrations. Therefore, decratonic gold deposits appear to occur preferentially in regions with oceanic subduction and overlying continental lithospheric destruction/modification/growth.

  4. Soft Translations and Soft Extensions of BCI/BCK-Algebras

    Directory of Open Access Journals (Sweden)

    Nazra Sultana

    2014-01-01

    Full Text Available The concept of soft translations of soft subalgebras and soft ideals over BCI/BCK-algebras is introduced and some related properties are studied. Notions of Soft extensions of soft subalgebras and soft ideals over BCI/BCK-algebras are also initiated. Relationships between soft translations and soft extensions are explored.

  5. Infrared mapping resolves soft tissue preservation in 50 million year-old reptile skin.

    Science.gov (United States)

    Edwards, N P; Barden, H E; van Dongen, B E; Manning, P L; Larson, P L; Bergmann, U; Sellers, W I; Wogelius, R A

    2011-11-07

    Non-destructive Fourier Transform InfraRed (FTIR) mapping of Eocene aged fossil reptile skin shows that biological control on the distribution of endogenous organic components within fossilized soft tissue can be resolved. Mapped organic functional units within this approximately 50 Myr old specimen from the Green River Formation (USA) include amide and sulphur compounds. These compounds are most probably derived from the original beta keratin present in the skin because fossil leaf- and other non-skin-derived organic matter from the same geological formation do not show intense amide or thiol absorption bands. Maps and spectra from the fossil are directly comparable to extant reptile skin. Furthermore, infrared results are corroborated by several additional quantitative methods including Synchrotron Rapid Scanning X-Ray Fluorescence (SRS-XRF) and Pyrolysis-Gas Chromatography/Mass Spectrometry (Py-GC/MS). All results combine to clearly show that the organic compound inventory of the fossil skin is different from the embedding sedimentary matrix and fossil plant material. A new taphonomic model involving ternary complexation between keratin-derived organic molecules, divalent trace metals and silicate surfaces is presented to explain the survival of the observed compounds. X-ray diffraction shows that suitable minerals for complex formation are present. Previously, this study would only have been possible with major destructive sampling. Non-destructive FTIR imaging methods are thus shown to be a valuable tool for understanding the taphonomy of high-fidelity preservation, and furthermore, may provide insight into the biochemistry of extinct organisms.

  6. The destruction of organic matter

    CERN Document Server

    Gorsuch, T T

    1970-01-01

    International Series of Monographs in Analytical Chemistry, Volume 39: The Destruction of Organic Matter focuses on the identification of trace elements in organic compounds. The monograph first offers information on the processes involved in the determination of trace elements in organic matters, as well as the methods not involving complete destruction of these elements. The text surveys the sources of errors in the processes responsible in pinpointing elements in organic compounds. These processes include sampling, disruption of the samples, manipulation, and measurements. The book

  7. Soft Costs Fact Sheet

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-05-01

    This fact sheet is an overview of the systems integration subprogram at the U.S. Department of Energy SunShot Initiative. Soft costs can vary significantly as a result of a fragmented energy marketplace. In the U.S., there are 18,000 jurisdictions and 3,000 utilities with different rules and regulations for how to go solar. The same solar equipment may vary widely in its final installation price due to process and market variations across jurisdictions, creating barriers to rapid industry growth. SunShot supports the development of innovative solutions that enable communities to build their local economies and establish clean energy initiatives that meet their needs, while at the same time creating sustainable solar market conditions.

  8. Fuzzy Soft Topological Groups

    Directory of Open Access Journals (Sweden)

    S. Nazmul

    2014-03-01

    Full Text Available Notions of Lowen type fuzzy soft topological space are introduced and some of their properties are established in the present paper. Besides this, a combined structure of a fuzzy soft topological space and a fuzzy soft group, which is termed here as fuzzy soft topological group is introduced. Homomorphic images and preimages are also examined. Finally, some definitions and results on fuzzy soft set are studied.

  9. Non-Destructive Detection and Separation of Radiation Damaged Cells in Miniaturized, Inexpensive Device Project

    Data.gov (United States)

    National Aeronautics and Space Administration — There is a clear and well-identified need for rapid, efficient, non-destructive detection and isolation of radiation damaged cells. Available commercial technologies...

  10. Animal Spirits Meets Creative Destruction

    NARCIS (Netherlands)

    Francois, P.; Lloyd-Ellis, H.

    2001-01-01

    We show how a Schumpeterian process of creative destruction can induce coordination in the timing of entrepreneurial activities across diverse sectors of the economy.Consequently, a multi-sector economy, in which sector-specific, productivity improvements are made by independent, profit-seeking

  11. Dynamic Scoring Through Creative Destruction

    NARCIS (Netherlands)

    van Oudheusden, P.

    2012-01-01

    Abstract: We examine the dynamic feedback effects of fiscal policies on the government budget and economy activity in a calibrated general equilibrium framework featuring endogenous growth through creative destruction. For several European countries, we find that making tax incentives with respect

  12. Weapons of mass destruction: radiation.

    Science.gov (United States)

    Neal, Chris J; Moores, Leon E

    2002-03-15

    The purpose of this review is to present a concise overview of the types of radiation, methods of dispersal, injury patterns, and treatment considerations in a scenario involving radiation-based weapons of mass destruction. Radiation-related casualties, although uncommon, are a potential threat because more nations and organizations are developing the technology for producing radioactive substances capable of being used as weapons.

  13. Destructive lesions of the brain.

    Science.gov (United States)

    Raybaud, C

    1983-01-01

    The congenital destructive lesions of the brain include focal lesions (porencephaly) and diffuse lesions (micrencephaly, hydranencephaly). According to the time the injury occurred and following the assumption of Yakovlev and Wadworth (1946), they are classified as agenetic porencephalies, either - bilateral (schizencephaly) or unilateral, when the injury occurs early enough in gestation (before 6 months) to disturb the growth of the cerebral mantle: abnormal sulcal pattern and heterotopic gray matter are then observed. They are classified as encephaloclastic when the destruction affects an otherwise normal cerebrum (last trimester). The porencephalies should be differenciated from post natal lesions (multicystic encephalomalacia, focal cavitations). By showing the fluid cavity and the cortical distortion, neuroradiology permits precise diagnosis of the defect itself and the associated cortical disorder, as well as an evaluation when they occurred.

  14. Creative Destruction and Productive Preemption

    OpenAIRE

    Norbäck, Pehr-Johan; Persson, Lars; Svensson, Roger

    2009-01-01

    We develop a theory of innovation for entry and sale into oligopoly, and show that inventions of higher quality are more likely to be sold (or licensed) to an incumbent due to strategic product market effects on the sales price. Such preemptive acquisitions by incumbents are shown to stimulate the process of creative destruction by increasing the entrepreneurial effort allocated to high-quality invention projects. Using data on patents granted to small firms and individuals, we find evidence ...

  15. Soft Robotic Grippers for Biological Sampling on Deep Reefs

    Science.gov (United States)

    Galloway, Kevin C.; Becker, Kaitlyn P.; Phillips, Brennan; Kirby, Jordan; Licht, Stephen; Tchernov, Dan; Gruber, David F.

    2016-01-01

    Abstract This article presents the development of an underwater gripper that utilizes soft robotics technology to delicately manipulate and sample fragile species on the deep reef. Existing solutions for deep sea robotic manipulation have historically been driven by the oil industry, resulting in destructive interactions with undersea life. Soft material robotics relies on compliant materials that are inherently impedance matched to natural environments and to soft or fragile organisms. We demonstrate design principles for soft robot end effectors, bench-top characterization of their grasping performance, and conclude by describing in situ testing at mesophotic depths. The result is the first use of soft robotics in the deep sea for the nondestructive sampling of benthic fauna. PMID:27625917

  16. Chondrule destruction in nebular shocks

    Energy Technology Data Exchange (ETDEWEB)

    Jacquet, Emmanuel; Thompson, Christopher, E-mail: ejacquet@mnhn.fr [Canadian Institute for Theoretical Astrophysics, University of Toronto, 60 St George Street, Toronto, ON M5S 3H8 (Canada)

    2014-12-10

    Chondrules are millimeter-sized silicate spherules ubiquitous in primitive meteorites, but whose origin remains mysterious. One of the main proposed mechanisms for producing them is melting of solids in shock waves in the gaseous protoplanetary disk. However, evidence is mounting that chondrule-forming regions were enriched in solids well above solar abundances. Given the high velocities involved in shock models, destructive collisions would be expected between differently sized grains after passage of the shock front as a result of differential drag. We investigate the probability and outcome of collisions of particles behind a one-dimensional shock using analytic methods as well as a full integration of the coupled mass, momentum, energy, and radiation equations. Destruction of protochondrules seems unavoidable for solid/gas ratios ε ≳ 0.1, and possibly even for solar abundances because of 'sandblasting' by finer dust. A flow with ε ≳ 10 requires much smaller shock velocities (∼2 versus 8 km s{sup –1}) in order to achieve chondrule-melting temperatures, and radiation trapping allows slow cooling of the shocked fragments. Initial destruction would still be extensive; although re-assembly of millimeter-sized particles would naturally occur by grain sticking afterward, the compositional heterogeneity of chondrules may be difficult to reproduce. We finally note that solids passing through small-scale bow shocks around few kilometer-sized planetesimals might experience partial melting and yet escape fragmentation.

  17. Soft Neutrosophic Group

    Directory of Open Access Journals (Sweden)

    Muhammad Shabir

    2013-03-01

    Full Text Available In this paper we extend the neutrosophic group and subgroup to soft neutrosophic group and soft neutrosophic subgroup respectively. Properties and theorems related to them are proved and many examples are given.

  18. Soft Concurrent Constraint Programming

    OpenAIRE

    Bistarelli, S.; Montanari, U.; Rossi, F.

    2002-01-01

    Soft constraints extend classical constraints to represent multiple consistency levels, and thus provide a way to express preferences, fuzziness, and uncertainty. While there are many soft constraint solving formalisms, even distributed ones, by now there seems to be no concurrent programming framework where soft constraints can be handled. In this paper we show how the classical concurrent constraint (cc) programming framework can work with soft constraints, and we also propose an extension ...

  19. Mappings on Fuzzy Soft Classes

    Directory of Open Access Journals (Sweden)

    Athar Kharal

    2009-01-01

    Full Text Available We define the concept of a mapping on classes of fuzzy soft sets and study the properties of fuzzy soft images and fuzzy soft inverse images of fuzzy soft sets, and support them with examples and counterexamples.

  20. Soft Congruence Relations over Rings

    Directory of Open Access Journals (Sweden)

    Xiaolong Xin

    2014-01-01

    Full Text Available Molodtsov introduced the concept of soft sets, which can be seen as a new mathematical tool for dealing with uncertainty. In this paper, we initiate the study of soft congruence relations by using the soft set theory. The notions of soft quotient rings, generalized soft ideals and generalized soft quotient rings, are introduced, and several related properties are investigated. Also, we obtain a one-to-one correspondence between soft congruence relations and idealistic soft rings and a one-to-one correspondence between soft congruence relations and soft ideals. In particular, the first, second, and third soft isomorphism theorems are established, respectively.

  1. Nilotinib-Associated Destructive Thyroiditis

    Directory of Open Access Journals (Sweden)

    Suhalia Bakerywala

    2015-01-01

    Full Text Available Protein tyrosine kinase inhibitors are currently an important drug class in the treatment of leukemia. They represent targeted cancer therapy and have become the treatment of choice in chronic myeloid leukemia. Tyrosine kinases are enzymes expressed in multiple tissues and are involved in several signaling pathways influencing cellular growth. Below we describe a patient who developed an unusual complication of tyrosine kinase inhibitor therapy: thyrotoxicosis due to destructive thyroiditis. We review the pathophysiology of tyrosine kinase inhibitor-induced thyroid dysfunction particularly with regard to new second-generation tyrosine kinase inhibitors.

  2. Creative destruction and export patterns

    DEFF Research Database (Denmark)

    Hansen, Jørgen Drud; Kvedaras, Virmantas; Nielsen, Jørgen Ulff-Møller

    2014-01-01

    varieties obsolete. For a given technology (variety) production costs decrease after an infant period due to learning. While all firms are assumed to be symmetric in a life-cycle perspective, at a given point in time firms of different ages differ in productivity, firm size, product quality, and export...... behavior. The model highlights a process of creative destruction, which allows firms to produce in a finite span of periods determined by the intensity of product and process innovations. The model predicts a wide range of export behavior of the individual firm during its life cycle depending...

  3. Soft hair as a soft wig

    Science.gov (United States)

    Bousso, Raphael; Porrati, Massimo

    2017-10-01

    We consider large gauge transformations of gravity and electromagnetism in D=4 asymptotically flat spacetime. Already at the classical level, we identify a canonical transformation that decouples the soft variables from the hard dynamics. We find that only the soft dynamics is constrained by BMS or large U(1) charge conservation. Physically this corresponds to the fact that sufficiently long-wavelength photons or gravitons that are added to the in-state will simply pass through the interaction region; they scatter trivially in their own sector. This implies in particular that the large gauge symmetries bear no relevance to the black hole information paradox. We also present the quantum version of soft decoupling. As a consistency check, we show that the apparent mixing of soft and hard modes in the original variables arises entirely from the long range field of the hard charges, which is fixed by gauge invariance and so contains no additional information.

  4. Self-Destructing Dark Matter

    Energy Technology Data Exchange (ETDEWEB)

    Grossman, Yuval [Cornell U., LEPP; Harnik, Roni [Fermilab; Telem, Ofri [Cornell U., LEPP; Zhang, Yue [Northwestern U.

    2017-12-01

    We present Self-Destructing Dark Matter (SDDM), a new class of dark matter models which are detectable in large neutrino detectors. In this class of models, a component of dark matter can transition from a long-lived state to a short-lived one by scattering off of a nucleus or an electron in the Earth. The short-lived state then decays to Standard Model particles, generating a dark matter signal with a visible energy of order the dark matter mass rather than just its recoil. This leads to striking signals in large detectors with high energy thresholds. We present a few examples of models which exhibit self destruction, all inspired by bound state dynamics in the Standard Model. The models under consideration exhibit a rich phenomenology, possibly featuring events with one, two, or even three lepton pairs, each with a fixed invariant mass and a fixed energy, as well as non-trivial directional distributions. This motivates dedicated searches for dark matter in large underground detectors such as Super-K, Borexino, SNO+, and DUNE.

  5. Destruction of noise in biotelemetry.

    Science.gov (United States)

    Fraden, J

    1979-01-01

    The difference in statistical characteristics between physiological signals and noise creates the possibility of designing a selective circuit to separate signals from noise. Analysis shows that by an extremely low signal-to-noise ratio before the pulse conditioner in a biotelemetry system, the mixture of normal and spurious pulses are present at the demodulator input. The system of noise destruction analyzes the sequential distances between two following pulses and blanks all spurious pulses using the criteria of high autocorrelation of physiological signals in short intervals. Evaluation of the circuit demonstrates a dramatic increase in accuracy in the presence of strong interference because the system of noise destruction performs a linear extrapolation of free-of-noise parts of pulse flow into destroyed spaces. The equations to calculate selective thresholds and output errors are delineated. The noise destructor is especially useful in long-term monitoring and automatic data analysis because it prevents a formation of sharp noisy spikes at the biotelemetry system's output.

  6. Evaluation of nitrate destruction methods

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, P.A. [Oak Ridge National Lab., TN (United States); Kurath, D.E.; Guenther, R. [Pacific Northwest Lab., Richland, WA (United States)

    1993-03-30

    A wide variety of high nitrate-concentration aqueous mixed [radioactive and Resource Conservation and Recovery Act (RCRA) hazardous] wastes are stored at various US Department of Energy (DOE) facilities. These wastes will ultimately be solidified for final disposal, although the waste acceptance criteria for the final waste form is still being determined. Because the nitrates in the wastes will normally increase the volume or reduce the integrity of all of the waste forms under consideration for final disposal, nitrate destruction before solidification of the waste will generally be beneficial. This report describes and evaluates various technologies that could be used to destroy the nitrates in the stored wastes. This work was funded by the Department of Energy`s Office of Technology Development, through the Chemical/Physical Technology Support Group of the Mixed Waste Integrated Program. All the nitrate destruction technologies will require further development work before a facility could be designed and built to treat the majority of the stored wastes. Several of the technologies have particularly attractive features: the nitrate to ammonia and ceramic (NAC) process produces an insoluble waste form with a significant volume reduction, electrochemical reduction destroys nitrates without any chemical addition, and the hydrothermal process can simultaneously treat nitrates and organics in both acidic and alkaline wastes. These three technologies have been tested using lab-scale equipment and surrogate solutions. At their current state of development, it is not possible to predict which process will be the most beneficial for a particular waste stream.

  7. Indirect Self-Destructiveness and Emotional Intelligence.

    Science.gov (United States)

    Tsirigotis, Konstantinos

    2016-06-01

    While emotional intelligence may have a favourable influence on the life and psychological and social functioning of the individual, indirect self-destructiveness exerts a rather negative influence. The aim of this study has been to explore possible relations between indirect self-destructiveness and emotional intelligence. A population of 260 individuals (130 females and 130 males) aged 20-30 (mean age of 24.5) was studied by using the Polish version of the chronic self-destructiveness scale and INTE, i.e., the Polish version of the assessing emotions scale. Indirect self-destructiveness has significant correlations with all variables of INTE (overall score, factor I, factor II), and these correlations are negative. The intensity of indirect self-destructiveness differentiates significantly the height of the emotional intelligence and vice versa: the height of the emotional intelligence differentiates significantly the intensity of indirect self-destructiveness. Indirect self-destructiveness has negative correlations with emotional intelligence as well as its components: the ability to recognize emotions and the ability to utilize emotions. The height of emotional intelligence differentiates the intensity of indirect self-destructiveness, and vice versa: the intensity of indirect self-destructiveness differentiates the height of emotional intelligence. It seems advisable to use emotional intelligence in the prophylactic and therapeutic work with persons with various types of disorders, especially with the syndrome of indirect self-destructiveness.

  8. Concave Soft Sets, Critical Soft Points, and Union-Soft Ideals of Ordered Semigroups

    Directory of Open Access Journals (Sweden)

    Young Bae Jun

    2014-01-01

    Full Text Available The notions of union-soft semigroups, union-soft l-ideals, and union-soft r-ideals are introduced, and related properties are investigated. Characterizations of a union-soft semigroup, a union-soft l-ideal, and a union-soft r-ideal are provided. The concepts of union-soft products and union-soft semiprime soft sets are introduced, and their properties related to union-soft l-ideals and union-soft r-ideals are investigated. Using the notions of union-soft l-ideals and union-soft r-ideals, conditions for an ordered semigroup to be regular are considered. The concepts of concave soft sets and critical soft points are introduced, and their properties are discussed.

  9. Developing Soft Skills in Millennial Students: A Delphi Study

    Science.gov (United States)

    McCullough-Billups, Mary Y.

    2017-01-01

    This study addressed the deficiency in soft skills of millennial workers in the United States. The weakness or absence of soft skills of millennial workers is problematic because Millennials are rapidly increasing in the workplace as large numbers of baby boomers are retiring. The purpose of this study was to obtain the expert opinions of a sample…

  10. Operations on Soft Graphs

    Directory of Open Access Journals (Sweden)

    Muhammad Akram

    2015-12-01

    Full Text Available Mathematical modelling, analysis and computing of problems with uncertainty is one of the hottest areas in interdisciplinary research involving applied mathematics, computational intelligence and decision sciences. It is worth noting that uncertainty arises from various domains has very different nature and cannot be captured within a single mathematical framework. Molodtsov’s soft sets provide us a new way of coping with uncertainty from the viewpoint of parameterization. In this paper, we introduce the concepts of soft graphs, vertex-induced soft graphs, edge-induced soft graphs and describe some operations on soft graphs by presenting several examples to demonstrate these new concepts. Finally, we investigate some fundamental properties of soft graphs.

  11. Soft matter physics

    CERN Document Server

    Doi, Masao

    2013-01-01

    Soft matter (polymers, colloids, surfactants and liquid crystals) are an important class of materials in modern technology. They also form the basis of many future technologies, for example in medical and environmental applications. Soft matter shows complex behaviour between fluids and solids, and used to be a synonym of complex materials. Due to the developments of the past two decades, soft condensed matter can now be discussed on the same sound physical basis as solid condensedmatter. The purpose of this book is to provide an overview of soft matter for undergraduate and graduate students

  12. Multigait soft robot.

    Science.gov (United States)

    Shepherd, Robert F; Ilievski, Filip; Choi, Wonjae; Morin, Stephen A; Stokes, Adam A; Mazzeo, Aaron D; Chen, Xin; Wang, Michael; Whitesides, George M

    2011-12-20

    This manuscript describes a unique class of locomotive robot: A soft robot, composed exclusively of soft materials (elastomeric polymers), which is inspired by animals (e.g., squid, starfish, worms) that do not have hard internal skeletons. Soft lithography was used to fabricate a pneumatically actuated robot capable of sophisticated locomotion (e.g., fluid movement of limbs and multiple gaits). This robot is quadrupedal; it uses no sensors, only five actuators, and a simple pneumatic valving system that operates at low pressures (robot to navigate a difficult obstacle. This demonstration illustrates an advantage of soft robotics: They are systems in which simple types of actuation produce complex motion.

  13. On defining soft spaces by weak soft neighborhood systems

    Directory of Open Access Journals (Sweden)

    Taha ÖZTÜRK

    2016-04-01

    Full Text Available In the present paper, we define the concepts of weak soft neighborhood space, soft w^{s}(?,?'-continuous, soft w^{s}-continuous and soft w^{s^{*}}-continuous on weak soft neighborhood spaces. Finally, we introduce their basic properties and some examples.

  14. Neural network and principal component regression in non-destructive soluble solids content assessment: a comparison*

    OpenAIRE

    Chia, Kim-seng; Herlina ABDUL RAHIM; Ruzairi ABDUL RAHIM

    2012-01-01

    Visible and near infrared spectroscopy is a non-destructive, green, and rapid technology that can be utilized to estimate the components of interest without conditioning it, as compared with classical analytical methods. The objective of this paper is to compare the performance of artificial neural network (ANN) (a nonlinear model) and principal component regression (PCR) (a linear model) based on visible and shortwave near infrared (VIS-SWNIR) (400–1000 nm) spectra in the non-destructive sol...

  15. Indirect Self-Destructiveness and Emotional Intelligence

    OpenAIRE

    Tsirigotis, Konstantinos

    2015-01-01

    While emotional intelligence may have a favourable influence on the life and psychological and social functioning of the individual, indirect self-destructiveness exerts a rather negative influence. The aim of this study has been to explore possible relations between indirect self-destructiveness and emotional intelligence. A population of 260 individuals (130 females and 130 males) aged 20?30 (mean age of 24.5) was studied by using the Polish version of the chronic self-destructiveness scale...

  16. Finally, proof of weapons of mass destruction.

    Science.gov (United States)

    Baldwin, Ian T

    2003-10-07

    Allelopathy (one species' use of chemicals to harm other species) may be a key ingredient in successful invasions of alien plants into established communities. Bais et al. show that in response to elicitation by common soil fungi, spotted knapweed (Centaurea maculosa) launches an ineffective defense against the fungi that results in extensive collateral damage to neighboring plants. Specifically, the flavonoid (-)-catechin, released from the roots of knapweed, produces a massive reactive oxygen species (ROS)-mediated oxidative burst, Ca2+ signaling, and rapid cell death in those unadapted native species whose habitats the plant regularly invades. The roots release both (+) and (-) enantiomers, but only the (-) enantiomer functions as a weapon of mass destruction; the (+) enantiomer inhibits the growth of numerous common soil-borne bacterial pathogens. Eliciting apoptotic response for a competitive advantage is an example of signal cross-talk between the genomes of interacting organisms and highlights how the internal signaling of one organism can be used by others to adjust their phenotypes in an adaptive manner. The study provides strong circumstantial evidence for an allelopathic interaction, but the genetic manipulation of (-)-catechin release would allow researchers to determine if these responses occur in nature. Precise genetic control over the release of secondary metabolites from plants would benefit ecological research.

  17. Possibility Fuzzy Soft Set

    Directory of Open Access Journals (Sweden)

    Shawkat Alkhazaleh

    2011-01-01

    Full Text Available We introduce the concept of possibility fuzzy soft set and its operation and study some of its properties. We give applications of this theory in solving a decision-making problem. We also introduce a similarity measure of two possibility fuzzy soft sets and discuss their application in a medical diagnosis problem.

  18. learning and soft skills

    DEFF Research Database (Denmark)

    Rasmussen, Lauge Baungaard

    2000-01-01

    Learning of soft skills are becoming more and more necessary due to the complexe development of modern companies and their environments. However, there seems to be a 'gap' between intentions and reality regarding need of soft skills and the possiblities to be educated in this subject in particular...

  19. Evaluating six soft approaches

    DEFF Research Database (Denmark)

    Sørensen, Lene Tolstrup; Vidal, Rene Victor Valqui

    2008-01-01

    's interactive planning principles to be supported by soft approaches in carrying out the principles in action. These six soft approaches are suitable forsupporting various steps of the strategy development and planning process. These are the SWOT analysis, the Future Workshop, the Scenario methodology...

  20. Evaluating six soft approaches

    DEFF Research Database (Denmark)

    Sørensen, Lene; Vidal, Rene Victor Valqui

    2006-01-01

    ’s interactive planning principles to be supported by soft approaches in carrying out the principles in action. These six soft approaches are suitable for supporting various steps of the strategy development and planning process. These are the SWOT analysis, the Future Workshop, the Scenario methodology...

  1. Evaluating Six Soft Approaches

    DEFF Research Database (Denmark)

    Sørensen, Lene Tolstrup; Valqui Vidal, René Victor

    2008-01-01

    's interactive planning principles to be supported by soft approaches in carrying out the principles in action. These six soft approaches are suitable forsupporting various steps of the strategy development and planning process. These are the SWOT analysis, the Future Workshop, the Scenario methodology...

  2. Soft Pion Processes

    Science.gov (United States)

    Nambu, Y.

    1968-01-01

    My talk is concerned with a review, not necessarily of the latest theoretical developments, but rather of an old idea which has contributed to recent theoretical activities. By soft pion processes I mean processes in which low energy pions are emitted or absorbed or scattered, just as we use the word soft photon in a similar context. Speaking more quantitatively, we may call a pion soft if its energy is small compared to a natural scale in the reaction. This scale is determined by the particular dynamics of pion interaction, and one may roughly say that a pion is soft if its energy is small compared to the energies of the other individual particles that participate in the reaction. It is important to note at this point that pion is by far the lightest member of all the hadrons, and much of the success of the soft pion formulas depends on this fact.

  3. Soft buckling actuators

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Dian; Whitesides, George M.

    2017-12-26

    A soft actuator is described, including: a rotation center having a center of mass; a plurality of bucklable, elastic structural components each comprising a wall defining an axis along its longest dimension, the wall connected to the rotation center in a way that the axis is offset from the center of mass in a predetermined direction; and a plurality of cells each disposed between two adjacent bucklable, elastic structural components and configured for connection with a fluid inflation or deflation source; wherein upon the deflation of the cell, the bucklable, elastic structural components are configured to buckle in the predetermined direction. A soft actuating device including a plurality of the soft actuators and methods of actuation using the soft actuator or soft actuating device disclosed herein are also described.

  4. Evaluating six soft approaches

    Directory of Open Access Journals (Sweden)

    Lene Sørensen

    2008-09-01

    Full Text Available The paper introduces and evaluates six soft approaches used in strategy development and planning. We take a planner’s perspective on discussing the concepts of strategy development and planning. This means that we see strategy development and planning as learning processes based on Ackoff’s interactive planning principles to be supported by soft approaches in carrying out the principles in action. These six soft approaches are suitable for supporting various steps of the strategy development and planning process. These are the SWOT analysis, the Future Workshop, the Scenario methodology, Strategic Option Development and Analysis, Strategic Choice Approach and Soft Systems Methodology. Evaluations of each methodology are carried out using a conceptual framework in which the organisation, the result, the process and the technology of the specific approach are taken into consideration. Using such a conceptual framework for evaluations of soft approaches increases the understanding of them, their transparency, and their usability in practice.

  5. Weapons of mass destruction, WMD.

    Science.gov (United States)

    Vogel, H

    2007-08-01

    Since the invasion into Iraq in 2003, weapons of mass destruction (WMD), have come to general notice; they include today chemical, biological, and atomic/nuclear weapons, (CW, BW, and AW). Radiological findings shall be described. X-ray findings of victims of WMD are described. From CW, own observations are reported. Examples of (possible) X-ray findings of victims of BW are described. AW may induce radiation disease. Exposure to sulfur-lost induces severe bronchitis; if the radiograph shows pulmonary infiltrations, the prognosis is bad; a late consequence maybe bronchiectasis. BW can be based on bacteria, virus or toxins. An approach of the X-ray findings for BW victims is based on the assumption that the disease induced by BW has the same (or a similar) clinic and radiology as that induced by the original microorganism or by the unchanged toxism. This approximation may have its limits, if the germ or toxin has been modified. In survivors of AW, the radiology is probably that of victims of thermal radiation and blast. WMD seem to be a real or a possible threat. They can be used in war, in terrorist attacks, in crime, and in action of secret services. In case that WMD are employed, X-ray diagnostic will be used to evaluate the prognosis (triage) and the risk of infection.

  6. Explosive destruction of 26Al

    Science.gov (United States)

    Kahl, D.; Yamaguchi, H.; Shimizu, H.; Abe, K.; Beliuskina, O.; Cha, S. M.; Chae, K. Y.; Ge, Z.; Hayakawa, S.; Kwag, M. S.; Kim, D. H.; Moon, J. Y.; Park, S. Y.; Yang, L.

    2017-09-01

    The γ -ray emission associated with the radioactive decay of 26Al is one of the key pieces of observational evidence indicating stellar nucleosynthesis is an ongoing process in our Galaxy, and it was the first such radioactivity to be detected. Despite numerous efforts in stellar modeling, observation, nuclear theory, and nuclear experiment over the past four decades, the precise sites and origin of Galactic ^{26} Al remain elusive. We explore the present experimental knowledge concerning the destruction of ^{26} Al in massive stars. The precise stellar rates of neutron-induced reactions on ^{26} Al, such as (n,p) and (n, α , have among the largest impacts on the total ^{26} Al yield. Meanwhile, reactions involving the short-lived isomeric state of ^{26} Al such as radiative proton capture are highly-uncertain at present. Although we presented on-going experimental work from n_TOF at CERN with an ^{26} Al target, the present proceeding focuses only on the ^{26} Al isomeric radioactive beam production aspect and the first experimental results at CRIB.

  7. Destructive lesions of the brain

    Energy Technology Data Exchange (ETDEWEB)

    Raybaud, C.

    1983-08-01

    The destructive lesions of the brain include a wide variety of congenital and postnatally acquired lesions, variably designated porencephaly, schizencephaly, multicystic encephalomalacia and micrencephaly. The term ''porencephaly'' has been a source of confusion since it was first coined by Heschl in 1859. At first, ''porencephaly'' was used to describe a defect which extended through the full thickness of the cerebral mantle. The ventricular lumen then communicated with the subarachnoid space through the ''porus''. Later ''porencephaly'' was used indiscriminately to describe any cavity of the brain parenchyma, whatever its etiology, pathogenesis, or time of development. This problem in nomenclature was compounded by inability to determine whether the cavities observed represented ''true'' malformations or acquired encephaloclastic lesions. In 1946, Yakovlev and Wadsworth published two papers entitled ''Schizencephalies; study of the congenital clefts in the cerebral mantle''. In these works, they stressed the peculiar morphology of the congenital porencephalies, and suggested that these lesions were sufficiently distinctive to be isolated from the other defects of the brain. Without addressing the precise origin or developmental course of these lesions, they pointed out that the morphologic changes indicated partial agenesis of the cerebral mantle at an early stage of development.

  8. 9 CFR 51.6 - Destruction of animals; time limit for destruction of animals.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Destruction of animals; time limit for destruction of animals. 51.6 Section 51.6 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION... ANIMALS DESTROYED BECAUSE OF BRUCELLOSIS Indemnity for Cattle, Bison, and Swine § 51.6 Destruction of...

  9. Fuzzy soft connected sets in fuzzy soft topological spaces II

    Directory of Open Access Journals (Sweden)

    A. Kandil

    2017-04-01

    Full Text Available In this paper, we introduce some different types of fuzzy soft connected components related to the different types of fuzzy soft connectedness and based on an equivalence relation defined on the set of fuzzy soft points of X. We have investigated some very interesting properties for fuzzy soft connected components. We show that the fuzzy soft C5-connected component may be not exists and if it exists, it may not be fuzzy soft closed set. Also, we introduced some very interesting properties for fuzzy soft connected components in discrete fuzzy soft topological spaces which is a departure from the general topology.

  10. Printing soft matter in three dimensions

    Science.gov (United States)

    Truby, Ryan L.; Lewis, Jennifer A.

    2016-12-01

    Light- and ink-based three-dimensional (3D) printing methods allow the rapid design and fabrication of materials without the need for expensive tooling, dies or lithographic masks. They have led to an era of manufacturing in which computers can control the fabrication of soft matter that has tunable mechanical, electrical and other functional properties. The expanding range of printable materials, coupled with the ability to programmably control their composition and architecture across various length scales, is driving innovation in myriad applications. This is illustrated by examples of biologically inspired composites, shape-morphing systems, soft sensors and robotics that only additive manufacturing can produce.

  11. Transverse vetoes with rapidity cutoff in SCET

    Science.gov (United States)

    Hornig, Andrew; Kang, Daekyoung; Makris, Yiannis; Mehen, Thomas

    2017-12-01

    We consider di-jet production in hadron collisions where a transverse veto is imposed on radiation for (pseudo-)rapidities in the central region only, where this central region is defined with rapidity cutoff. For the case where the transverse measurement (e.g., transverse energy or min p T for jet veto) is parametrically larger relative to the typical transverse momentum beyond the cutoff, the cross section is insensitive to the cutoff parameter and is factorized in terms of collinear and soft degrees of freedom. The virtuality for these degrees of freedom is set by the transverse measurement, as in typical transverse-momentum dependent observables such as Drell-Yan, Higgs production, and the event shape broadening. This paper focuses on the other region, where the typical transverse momentum below and beyond the cutoff is of similar size. In this region the rapidity cutoff further resolves soft radiation into (u)soft and soft-collinear radiation with different rapidities but identical virtuality. This gives rise to rapidity logarithms of the rapidity cutoff parameter which we resum using renormalization group methods. We factorize the cross section in this region in terms of soft and collinear functions in the framework of soft-collinear effective theory, then further refactorize the soft function as a convolution of the (u)soft and soft-collinear functions. All these functions are calculated at one-loop order. As an example, we calculate a differential cross section for a specific partonic channel, qq ' → qq ' , for the jet shape angularities and show that the refactorization allows us to resum the rapidity logarithms and significantly reduce theoretical uncertainties in the jet shape spectrum.

  12. Bipolar soft connected, bipolar soft disconnected and bipolar soft compact spaces

    Directory of Open Access Journals (Sweden)

    Muhammad Shabir

    2017-06-01

    Full Text Available Bipolar soft topological spaces are mathematical expressions to estimate interpretation of data frameworks. Bipolar soft theory considers the core features of data granules. Bipolarity is important to distinguish between positive information which is guaranteed to be possible and negative information which is forbidden or surely false. Connectedness and compactness are the most important fundamental topological properties. These properties highlight the main features of topological spaces and distinguish one topology from another. Taking this into account, we explore the bipolar soft connectedness, bipolar soft disconnectedness and bipolar soft compactness properties for bipolar soft topological spaces. Moreover, we introduce the notion of bipolar soft disjoint sets, bipolar soft separation, and bipolar soft hereditary property and study on bipolar soft connected and disconnected spaces. By giving the detailed picture of bipolar soft connected and disconnected spaces we investigate bipolar soft compact spaces and derive some results related to this concept.

  13. Rotting softly and stealthily.

    Science.gov (United States)

    Toth, Ian K; Birch, Paul R J

    2005-08-01

    The soft rot erwiniae, which are plant pathogens on potato and other crops world-wide, synthesize and secrete large quantities of plant cell wall degrading enzymes that are responsible for the soft rot phenotype, earning them the epithet 'brute force' pathogens. They have been distinguished from classic 'stealth' pathogens, such as Pseudomonas syringae, which possesses an extensive battery of Type III secreted effector proteins and phytotoxins to manipulate and suppress host defences. However, recent studies, including whole-genome sequencing, are revealing many components of stealth pathogenesis within the soft rot erwiniae (SRE), suggesting that 'stealth' and 'brute force' should not be regarded as mutually exclusive modes of pathogenesis.

  14. ATLAS soft QCD results

    CERN Document Server

    Sykora, Tomas; The ATLAS collaboration

    2018-01-01

    Recent results of soft QCD measurements performed by the ATLAS collaboration are reported. The measurements include total, elastic and inelastic cross sections, inclusive spectra, underlying event and particle correlations in p-p and p-Pb collisions.

  15. Surface integral formulation of Maxwell's equations for simulation of non-destructive testing by eddy currents. Preliminary study on the implementation of the fast multipole method; Formulation integrale surfacique des equations de Maxwell pour la simulation de controles non destructifs par courant de Foucault. Etude preliminaire a la mise en oeuvre de la methode multipole rapide.

    Energy Technology Data Exchange (ETDEWEB)

    Lim, T.

    2011-04-28

    To simulate numerically a non-destructive by eddy current testing (NDT-CF), the sensor response can be modeled through a semi-analytical approach by volume integral equations. Faster than the finite element method, this approach is however restricted to the study of plane or cylindrical parts (without taking into account the edge effects) because of the complexity of the expression of the dyadic Green function for more general configurations. However, there is an industrial demand to extend the capabilities of the CF model in complex configurations (deformed plates, edges effects...). We were thus brought to formulate the electromagnetic problem differently, by setting ourselves the goal of maintaining a semi-analytical approach. The surface integral equation (SIE) expresses the volume problem by an equivalent transmission one at the interfaces (2D) between homogeneous sub-domains. This problem is approached by a linear system (by the method of moments), whose number of unknowns is reduced due to the nature of the surfacic mesh. Therefore, this system can be solved by a direct solver for small configurations. That enabled us to treat several various positions of the sensor for only one inversion of the impedance matrix. The numerical results obtained using this formulation involve plates with consideration of edge effects such as edge and corner. They are consistent with results obtained by the finite element method. For larger configurations, we conducted a preliminary study for the adaptation of an acceleration method of the matrix vector product involved in an iterative solver (fast multipole method or FMM) to define the conditions under which the FMM calculation works correctly (accuracy, convergence...) in the NDT's domain. A special attention has been given to the choice of basis functions (which have to satisfy an Hdiv conforming property) and on the evaluation of near interactions (which are weakly singular). (author) [French] Pour simuler

  16. [Management of severe soft-tissue trauma in the upper extremity - shoulder, upper and lower arm].

    Science.gov (United States)

    Mittlmeier, Thomas; Krapohl, Björn Dirk; Schaser, Klaus-Dieter

    2010-05-01

    Salvage of the respective extremity. Standardized approach to adequate soft-tissue coverage (isolated severe soft-tissue trauma) and preconditioning for fracture healing (in complex trauma) as a basis for functional restoration. Limitation of secondary soft-tissue loss. Prevention of infection. Isolated extended severe soft-tissue trauma (crush trauma, degloving injury) in the region of the shoulder and the upper extremity. Complex trauma with soft-tissue involvement Gustilo IIIB/C or Tscherne GIII/IV. Segmental soft-tissue/bone loss. Subtotal or partial amputations. Unstable polytraumatized patient with vital hazards and the priority for lifesaving measures. Irretrievable devascularization or unreconstructable neural destruction, extended severe loss of multiple muscular units. Systematic, eventually serial debridement, temporary joint transfixation, reconstruction of macrocirculation, dermatofasciotomy in compartment syndrome, preferably primary shortening in segmental soft-tissue/bone loss, temporary soft-tissue coverage, systematic conditioning of soft tissues, postprimary or secondary soft-tissue reconstruction, secondary change to preferably internal fixation techniques. Individualized earliest possible passive or assisted mobilization of nontransfixed joints, early removal of transfixation and change to internal fixation modes, eventually secondary reconstructive measures (e.g., augmentation of bone defects, flap correction, secondary nerve reconstruction, functional muscle transposition procedures, arthrolyses). Patency rate after vascular reconstruction > 90%, flap survival > 95%, need for amputation is a rare entity; main determinants of prognosis: severity of soft-tissue trauma, neural damage, and potential for reconstruction.

  17. Soft Soil Mobility

    Science.gov (United States)

    2016-02-11

    any other provision of law , no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a...TYPE Final 3. DATES COVERED (From - To) 4. TITLE AND SUBTITLE Test Operations Procedure (TOP) 02-2-619A Soft Soil Mobility 5a. CONTRACT NUMBER...TOP supersedes TOP 02-2-619, Soft Soil Vehicle Mobility, dated 21 May 1970. Marginal notations are not used in this revision to identify changes

  18. Dynamics of Soft Matter

    CERN Document Server

    García Sakai, Victoria; Chen, Sow-Hsin

    2012-01-01

    Dynamics of Soft Matter: Neutron Applications provides an overview of neutron scattering techniques that measure temporal and spatial correlations simultaneously, at the microscopic and/or mesoscopic scale. These techniques offer answers to new questions arising at the interface of physics, chemistry, and biology. Knowledge of the dynamics at these levels is crucial to understanding the soft matter field, which includes colloids, polymers, membranes, biological macromolecules, foams, emulsions towards biological & biomimetic systems, and phenomena involving wetting, friction, adhesion, or micr

  19. Fuzzy logic, neural networks, and soft computing

    Science.gov (United States)

    Zadeh, Lofti A.

    1994-01-01

    The past few years have witnessed a rapid growth of interest in a cluster of modes of modeling and computation which may be described collectively as soft computing. The distinguishing characteristic of soft computing is that its primary aims are to achieve tractability, robustness, low cost, and high MIQ (machine intelligence quotient) through an exploitation of the tolerance for imprecision and uncertainty. Thus, in soft computing what is usually sought is an approximate solution to a precisely formulated problem or, more typically, an approximate solution to an imprecisely formulated problem. A simple case in point is the problem of parking a car. Generally, humans can park a car rather easily because the final position of the car is not specified exactly. If it were specified to within, say, a few millimeters and a fraction of a degree, it would take hours or days of maneuvering and precise measurements of distance and angular position to solve the problem. What this simple example points to is the fact that, in general, high precision carries a high cost. The challenge, then, is to exploit the tolerance for imprecision by devising methods of computation which lead to an acceptable solution at low cost. By its nature, soft computing is much closer to human reasoning than the traditional modes of computation. At this juncture, the major components of soft computing are fuzzy logic (FL), neural network theory (NN), and probabilistic reasoning techniques (PR), including genetic algorithms, chaos theory, and part of learning theory. Increasingly, these techniques are used in combination to achieve significant improvement in performance and adaptability. Among the important application areas for soft computing are control systems, expert systems, data compression techniques, image processing, and decision support systems. It may be argued that it is soft computing, rather than the traditional hard computing, that should be viewed as the foundation for artificial

  20. Teaching Soft Skills Employers Need

    Science.gov (United States)

    Ellis, Maureen; Kisling, Eric; Hackworth, Robbie G.

    2014-01-01

    This study identifies the soft skills community colleges teach in an office technology course and determines whether the skills taught are congruent with the soft skills employers require in today's entry-level office work. A qualitative content analysis of a community college office technology soft skills course was performed using 23 soft skills…

  1. TECHNOLOGIES FOR CFC/HALON DESTRUCTION

    Science.gov (United States)

    The report presents an overview of the current status of possible technologies used to destroy chlorofluorocarbons (CFCs) and halons chemicals implicated in the destruction of the stratospheric ozone layer. The Montreal Protocol an international treaty to control the production a...

  2. 27 CFR 40.253 - Destruction.

    Science.gov (United States)

    2010-04-01

    ... OF THE TREASURY (CONTINUED) TOBACCO MANUFACTURE OF TOBACCO PRODUCTS, CIGARETTE PAPERS AND TUBES, AND... completely or by rendering them unfit for consumption. Upon completion of the destruction, the manufacturer...

  3. Gender differentiation of indirect self-destructiveness

    National Research Council Canada - National Science Library

    Tsirigotis, Konstantinos; Gruszczyński, Wojciech; Tsirigotis-Maniecka, Marta

    2013-01-01

    ... as relationships between indirect self-destructiveness and its manifestations (categories) and the psychological dimensions of masculinity and femininity, also from the point of view of assessing occupational health...

  4. Reslts on fuzzy soft functions

    Directory of Open Access Journals (Sweden)

    Bekir TANAY

    2015-10-01

    Full Text Available The concept of fuzzy soft function is mentioned by Aygünoğlu et al and Kharal et al in their papers (named Introduction to Fuzzy Soft Groups (2009 and Mappings on Fuzzy Soft Classes (2009, respectively. In this paper, some results on the fuzzy soft image and preimage of set theoretic operations of fuzzy soft sets under a fuzzy soft function are studied. Also the notion of fuzzy soft equality is introduced and some related results are given.

  5. [Characterization of eosinophils in soft tissue eosinophilic granuloma].

    Science.gov (United States)

    Hirose, Takashi; Watanabe, Kensuke

    2008-06-01

    Soft tissue eosinophilic granuloma assumes the form of a poorly-demarcated painless mass, and is characterized by marked eosinophil infiltration. Although this tumor decreases in size in response to steroid therapy, it grows again after discontinuation of it, and ultimately proves intractable to treatment. We recently attempted to characterize electron-microscopically the eosinophils in the area affected by soft tissue eosinophilic granuloma. Needle biopsy of subauricular masses was carried out before and after steroid treatment. The collected tissue was observed under an electron microscope. Before treatment, more than 90% of the eosinophils constituting the granulation tissue had a broken cell membrane. A number of Charcot-Leyden crystals were noted in the intercellular spaces. Following steroid treatment, more than 90% of eosinophils were intact, and Charcot-Leyden crystals were no longer observed. These findings suggest that destruction of eosinophils within granulation tissue aggravates soft tissue eosinophilic granulom.

  6. Fuzzy parametrized fuzzy soft topology

    Directory of Open Access Journals (Sweden)

    Serkan Atmaca

    2016-01-01

    Full Text Available Recently, researches have contributed a lot towards fuzzification of Soft Set Theory. In this paper, we introduce the topological structure of fuzzyfying soft sets called fuzzy parametrized soft sets. We define the notion of quasi-coincidence for fuzzy parametrized soft sets and investigated basic properties of it. We study the closure, interior, base, continuity and compactness in the content of fuzzy parametrized soft topological spaces.

  7. Iodine-enhanced micro-CT imaging: methodological refinements for the study of the soft-tissue anatomy of post-embryonic vertebrates.

    Science.gov (United States)

    Gignac, Paul M; Kley, Nathan J

    2014-05-01

    The now widespread use of non-destructive X-ray computed tomography (CT) and micro-CT (µCT) has greatly augmented our ability to comprehensively detail and quantify the internal hard-tissue anatomy of vertebrates. However, the utility of X-ray imaging for gaining similar insights into vertebrate soft-tissue anatomy has yet to be fully realized due to the naturally low X-ray absorption of non-mineralized tissues. In this study, we show how a wide diversity of soft-tissue structures within the vertebrate head-including muscles, glands, fat deposits, perichondria, dural venous sinuses, white and gray matter of the brain, as well as cranial nerves and associated ganglia-can be rapidly visualized in their natural relationships with extraordinary levels of detail using iodine-enhanced (i-e) µCT imaging. To date, Lugol's iodine solution (I2 KI) has been used as a contrast agent for µCT imaging of small invertebrates, vertebrate embryos, and certain isolated parts of larger, post-embryonic vertebrates. These previous studies have all yielded promising results, but visualization of soft tissues in smaller invertebrate and embryonic vertebrate specimens has generally been more complete than that for larger, post-embryonic vertebrates. Our research builds on these previous studies by using high-energy µCT together with more highly concentrated I2 KI solutions and longer staining times to optimize the imaging and differentiation of soft tissues within the heads of post-embryonic archosaurs (Alligator mississippiensis and Dromaius novaehollandiae). We systematically quantify the intensities of tissue staining, demonstrate the range of anatomical structures that can be visualized, and generate a partial three-dimensional reconstruction of alligator cephalic soft-tissue anatomy. © 2014 Wiley Periodicals, Inc.

  8. Non-destructive seed evaluation with impact measurements and X-ray analysis

    NARCIS (Netherlands)

    Burg, van der W.J.; Jalink, H.; Zwol, van R.A.; Aartse, J.W.; Bino, R.J.

    1995-01-01

    Non-destructive testing is important in the search for seed characteristics that relate to quality. It provides a means for consecutive testing on a seed by seed basis. If the tests are fast and can be automated they can form the basis for rapid new analysis methods or online sorting. X-ray analysis

  9. Using magnetic levitation for non-destructive quality control of plastic parts.

    Science.gov (United States)

    Hennek, Jonathan W; Nemiroski, Alex; Subramaniam, Anand Bala; Bwambok, David K; Yang, Dian; Harburg, Daniel V; Tricard, Simon; Ellerbee, Audrey K; Whitesides, George M

    2015-03-04

    Magnetic levitation (MagLev) enables rapid and non-destructive quality control of plastic parts. The feasibility of MagLev as a method to: i) rapidly assess injection-molded plastic parts for defects during process optimization, ii) monitor the degradation of plastics after exposure to harsh environmental conditions, and iii) detect counterfeit polymers by density is demonstrated. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. On Soft Biometrics

    DEFF Research Database (Denmark)

    Nixon, Mark; Correia, Paulo; Nasrollahi, Kamal

    2015-01-01

    Innovation has formed much of the rich history in biometrics. The field of soft biometrics was originally aimed to augment the recognition process by fusion of metrics that were sufficient to discriminate populations rather than individuals. This was later refined to use measures that could be used...... to discriminate individuals, especially using descriptions that can be perceived using human vision and in surveillance imagery. A further branch of this new field concerns approaches to estimate soft biometrics, either using conventional biometrics approaches or just from images alone. These three strands...... combine to form what is now known as soft biometrics. We survey the achievements that have been made in recognition by and in estimation of these parameters, describing how these approaches can be used and where they might lead to. The approaches lead to a new type of recognition, and one similar...

  11. Soft, Embodied, Situated & Connected

    DEFF Research Database (Denmark)

    Tomico, Oscar; Wilde, Danielle

    2016-01-01

    Soft wearables include clothing and textile-based accessories that incorporate smart textiles and soft electronic interfaces to enable responsive and interactive experiences. When designed well, soft wearables leverage the cultural, sociological and material qualities of textiles, fashion and dress......; diverse capabilities and meanings of the body; as well as the qualities and capabilities afforded by smart and programmable elements. Textiles behave in particular ways. They are part of culture. No matter a person’s views on fashion, dress, their own or others’ body, they will have an intimate...... relationship with textiles, as they are one of the few products worn much of the time, often in direct contact with the body. When designing wearables a designer must consider a range of requirements that do not typically demand focus when designing products that are not worn, including: sensitivity...

  12. Gluon distribution in proton at soft and hard pp collisions

    CERN Document Server

    Lykasov, G I; Grinyuk, A A; Poghosyan, M; Dolbilov, A G

    2011-01-01

    We analyze the inclusive spectra of hadrons produced in $pp$ collisions at high energies in the mid-rapidity region within the soft QCD and perturbative QCD assuming the possible creation of the soft gluons at low intrinsic transverse momenta $k_t$. From the best description of the LHC data we found the parametrization of the unintegrated gluon distribution which at low $k_t$ is different from the one obtained within the perturbative QCD.

  13. AEROMEDICAL ASPECTS OF CONTACT LENSES (SOFT AND SEMISOFT)

    OpenAIRE

    PRASAD, GKG; VYAWAHARE, MK; KAPUR, R; SACHDEV, VS

    1995-01-01

    A comprehensive clinical study on the effects of various aviation stresses on soft and semisoft contact lenses was carried out to find out their compatibility in aviation environment. Twenty subjects (11 aircrew and 9 non air-crew) participated in the study. Twelve of them were given soft lenses of water contents of 38%, 50% and 78% and rest 8 were given semisoft lenses of daily wear and extended wear type. The environmental trial consisted of exposure to hypoxia, rapid decompression, acceler...

  14. Mechanics of soft materials

    CERN Document Server

    Volokh, Konstantin

    2016-01-01

    This book provides a concise introduction to soft matter modelling. It offers an up-to-date review of continuum mechanical description of soft and biological materials from the basics to the latest scientific materials. It includes multi-physics descriptions, such as chemo-, thermo-, electro- mechanical coupling. It derives from a graduate course at Technion that has been established in recent years. It presents original explanations for some standard materials and features elaborated examples on all topics throughout the text. PowerPoint lecture notes can be provided to instructors. .

  15. Soft tissue integration versus early biofilm formation on different dental implant materials

    NARCIS (Netherlands)

    Zhao, Bingran; van der Mei, Henderina; Subbiahdoss, Guruprakash; de Vries, Joop; Rustema-Abbing, Minie; Kuijer, Roel; Busscher, Henk J.; Qu-Ren, Yijin

    OBJECTIVE: Dental implants anchor in bone through a tight fit and osseo-integratable properties of the implant surfaces, while a protective soft tissue seal around the implants neck is needed to prevent bacterial destruction of the bone-implant interface. This tissue seal needs to form in the

  16. Mappings on Neutrosophic Soft Classes

    Directory of Open Access Journals (Sweden)

    Shawkat Alkhazaleh

    2014-03-01

    Full Text Available In 1995 Smarandache introduced the concept of neutrosophic set which is a mathematical tool for handling problems involving imprecise, indeterminacy and inconsistent data. In 2013 Maji introduced the concept of neutrosophic soft set theory as a general mathematical tool for dealing with uncertainty. In this paper we define the notion of a mapping on classes where the neutrosophic soft classes are collections of neutrosophic soft set. We also define and study the properties of neutrosophic soft images and neutrosophic soft inverse images of neutrosophic soft sets.

  17. Soft n-Ary Subgroups

    Directory of Open Access Journals (Sweden)

    D.R. Prince Williams

    2015-09-01

    Full Text Available Soft set theory plays a vital role in solving many complicated problems with inherited uncertainty. An n-ary algebraic systems is a generalization of algebraic structures and it is the most natural way for the further development, deeper understanding of their properties. In this paper, we apply soft set theory to an n-ary algebraic systems and introduce the notions of soft n-ary groups and soft n-ary subgroups. Further, some operations on soft sets are extended to the former. Finally, we provide the characterization of soft n-ary subgroups over an n-ary group (G,f and study their related properties.

  18. Topology of soft cone metric spaces

    Science.gov (United States)

    Altintas, Ismet; Simsek, Dagistan; Taskopru, Kemal

    2017-09-01

    In Simsek's paper it was introduced a concept of soft cone metric space via soft elements and some fixed point theorems in soft cone metric space were provided. In this work, we examine topological structures such as open ball, soft neighbourhood and soft open set in soft metric spaces and their some properties, and prove that every soft cone metric space under some condition is a soft topological space according to elementary operations on soft sets.

  19. Some Properties of Fuzzy Soft Proximity Spaces

    Science.gov (United States)

    Demir, İzzettin; Özbakır, Oya Bedre

    2015-01-01

    We study the fuzzy soft proximity spaces in Katsaras's sense. First, we show how a fuzzy soft topology is derived from a fuzzy soft proximity. Also, we define the notion of fuzzy soft δ-neighborhood in the fuzzy soft proximity space which offers an alternative approach to the study of fuzzy soft proximity spaces. Later, we obtain the initial fuzzy soft proximity determined by a family of fuzzy soft proximities. Finally, we investigate relationship between fuzzy soft proximities and proximities. PMID:25793224

  20. Rapid scenarios and observed intensities

    OpenAIRE

    Franco Pettenati; Livio Sirovich

    2012-01-01

    After a destructive earthquake, national Governments need to know the approximate amount of damage, the number of casualties, and the financial losses as soon as possible. Rapid scenarios are also used to inform the general public; see the widely used Shakemap package [Wald et al. 1999, 2006] of the US Geological Survey (USGS) and the one modified by the Istituto Nazionale di Geofisica e Vulcanologia (INGV; National Institute of Geophysics and Volcanology), which is reproduced for Figure 1. T...

  1. Soft actuators and soft actuating devices

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Dian; Whitesides, George M.

    2017-10-17

    A soft buckling linear actuator is described, including: a plurality of substantially parallel bucklable, elastic structural components each having its longest dimension along a first axis; and a plurality of secondary structural components each disposed between and bridging two adjacent bucklable, elastic structural components; wherein every two adjacent bucklable, elastic structural components and the secondary structural components in-between define a layer comprising a plurality of cells each capable of being connected with a fluid inflation or deflation source; the secondary structural components from two adjacent layers are not aligned along a second axis perpendicular to the first axis; and the secondary structural components are configured not to buckle, the bucklable, elastic structural components are configured to buckle along the second axis to generate a linear force, upon the inflation or deflation of the cells. Methods of actuation using the same are also described.

  2. Soft Matter Characterization

    CERN Document Server

    Borsali, Redouane

    2008-01-01

    Progress in basic soft matter research is driven largely by the experimental techniques available. Much of the work is concerned with understanding them at the microscopic level, especially at the nanometer length scales that give soft matter studies a wide overlap with nanotechnology. This 2 volume reference work, split into 4 parts, presents detailed discussions of many of the major techniques commonly used as well as some of those in current development for studying and manipulating soft matter. The articles are intended to be accessible to the interdisciplinary audience (at the graduate student level and above) that is or will be engaged in soft matter studies or those in other disciplines who wish to view some of the research methods in this fascinating field. Part 1 contains articles with a largely (but, in most cases, not exclusively) theoretical content and/or that cover material relevant to more than one of the techniques covered in subsequent volumes. It includes an introductory chapter on some of t...

  3. Soft Tissue Extramedullary Plasmacytoma

    Directory of Open Access Journals (Sweden)

    Fernando Ruiz Santiago

    2010-01-01

    Full Text Available We present the uncommon case of a subcutaneous fascia-based extramedullary plasmacytoma in the leg, which was confirmed by the pathology report and followed up until its remission. We report the differential diagnosis with other more common soft tissue masses. Imaging findings are nonspecific but are important to determine the tumour extension and to plan the biopsy.

  4. Optomechanical soft metamaterials

    Science.gov (United States)

    Peng, Xiangjun; He, Wei; Liu, Yifan; Xin, Fengxian; Lu, Tian Jian

    2017-06-01

    We present a new type of optomechanical soft metamaterials, which is different from conventional mechanical metamaterials, in that they are simple isotropic and homogenous materials without resorting to any complex nano/microstructures. This metamaterial is unique in the sense that its responses to uniaxial forcing can be tailored by programmed laser inputs to manifest different nonlinear constitutive behaviors, such as monotonic, S-shape, plateau, and non-monotonic snapping performance. To demonstrate the novel metamaterial, a thin sheet of soft material impinged by two counterpropagating lasers along its thickness direction and stretched by an in-plane tensile mechanical force is considered. A theoretical model is formulated to characterize the resulting optomechanical behavior of the thin sheet by combining the nonlinear elasticity theory of soft materials and the optical radiation stress theory. The optical radiation stresses predicted by the proposed model are validated by simulations based on the method of finite elements. Programmed optomechanical behaviors are subsequently explored using the validated model under different initial sheet thicknesses and different optical inputs, and the first- and second-order tangential stiffness of the metamaterial are used to plot the phase diagram of its nonlinear constitutive behaviors. The proposed optomechanical soft metamaterial shows great potential in biological medicine, microfluidic manipulation, and other fields.

  5. Soft matter's charismatic pioneer

    Science.gov (United States)

    McLeish, Tom

    2012-11-01

    This summer I took a break from lecturing at a graduate training school in Boulder, Colorado, to attend a talk by the soft-condensed-matter physicist David Weitz. His lecture was about colloids, and in the middle of it, he began to reminisce about the field's early days.

  6. Hard and Soft Governance

    DEFF Research Database (Denmark)

    Moos, Lejf

    2009-01-01

    The governance and leadership at transnational, national and school level seem to be converging into a number of isomorphic forms as we see a tendency towards substituting 'hard' forms of governance, that are legally binding, with 'soft' forms based on persuasion and advice. This article analyses...

  7. Bipolar Neutrosophic Soft Expert Sets

    OpenAIRE

    Şahin, Mehmet; Deli, İrfan; Uluçay, Vakkas

    2016-01-01

    In this paper, we introduce concept of bipolar neutrosophic soft expert set and its some operations. Also, we propose score, certainty and accuracy functions to compare the bipolar neutrosophic soft expert sets. We give examples for these concepts. 

  8. Soft skills and dental education

    OpenAIRE

    Gonzalez, M. A. G.; Abu Kasim, N.H.; Naimie, Z.

    2014-01-01

    Soft skills and hard skills are essential in the practice of dentistry. While hard skills deal with technical proficiency, soft skills relate to a personal values and interpersonal skills that determine a person's ability to fit in a particular situation. These skills contribute to the success of organisations that deal face-to-face with clients. Effective soft skills benefit the dental practice. However, the teaching of soft skills remains a challenge to dental schools. This paper discus...

  9. Hesitant intuitionistic fuzzy soft sets

    Science.gov (United States)

    Nazra, Admi; Syafruddin; Lestari, Riri; Catur Wicaksono, Gandung

    2017-09-01

    This paper aims to extend the hesitant fuzzy soft sets to hesitant intuitionistic fuzzy soft sets by merging the concept of hesitant intuitionistic fuzzy sets and soft sets. The authors define some operations on hesitant intuitionistic fuzzy sets, such as complement, union and intersection, and obtain related properties. The similar operations are defined on hesitant intuitionistic fuzzy soft sets, and also some properties such as assosiative and De Morgan’s laws are obtained.

  10. Possibility Intuitionistic Fuzzy Soft Set

    Directory of Open Access Journals (Sweden)

    Maruah Bashir

    2012-01-01

    Full Text Available Possibility intuitionistic fuzzy soft set and its operations are introduced, and a few of their properties are studied. An application of possibility intuitionistic fuzzy soft sets in decision making is investigated. A similarity measure of two possibility intuitionistic fuzzy soft sets has been discussed. An application of this similarity measure in medical diagnosis has been shown.

  11. Non-destructive Testing of Pipelines

    CERN Document Server

    Annila, L

    2001-01-01

    This paper shall present different, contemporarily available non-destructive testing (NDT) methods of pipelines and compare them to each other from the technical and economical point of view. An evaluation of their suitability for CERN activities, based on the opinions and experience of various specialists at CERN (LHC, ST, TIS), is also introduced.

  12. Creative Destruction in Libraries: Designing our Future

    Directory of Open Access Journals (Sweden)

    Caro Pinto

    2013-11-01

    Full Text Available In Brief: Joseph Schumpeter defines creative destruction as a “process of industrial mutation that incessantly revolutionizes the economic structure from within, incessantly destroying the old one, incessantly creating a new one.” As libraries struggle with how to position themselves to thrive in the digital age, how can we balance the traditional elements of librarianship like […

  13. Climatology of destructive hailstorms in Brazil

    Science.gov (United States)

    Martins, Jorge A.; Brand, Veronika S.; Capucim, Mauricio N.; Felix, Rafael R.; Martins, Leila D.; Freitas, Edmilson D.; Gonçalves, Fabio L. T.; Hallak, Ricardo; Dias, Maria A. F. Silva; Cecil, Daniel J.

    2017-02-01

    Hail is considered to be among the most complex extreme weather phenomena of the atmosphere. Every year, notably in the southern Brazilian States, destructive hailstorms result in serious economic losses and cause a great social impact destroying crops, homes, medical facilities and schools. The aim of this study is to document the spatial, annual, and diurnal variation in destructive hailstorm frequency during a 22 year period from 1991 to 2012 in Brazil. The analysis is based on a collection of reports released by the Brazilian National Civil Protection Secretariat - SEDEC. Based on reports of emergency assistance given to the population affected by a disaster, the information discussed in this work is assumed as representative only of destructive hailstorms. The analysis reveals a large spatial variability, with the majority of hailstorm occurrences distributed in the three southernmost Brazilian States. Within those states, the number of hail reports was observed to increase with increasing population density in rural areas. Hailstorms were reported most often in the late afternoon and evening of the winter/spring transition, in agreement with a few other areas in the subtropics with available studies, but different from the majority of studies for temperate zones, which suggest spring/summer as the hail season. Although the results show some discrepancies compared to satellite hail signatures, the findings of this work confirm that southern Brazil is a region prone to the development of strong convective storms, with high annual numbers of destructive hail events.

  14. 32 CFR 644.497 - Destruction.

    Science.gov (United States)

    2010-07-01

    ... of funds for destruction of improvements which have no sale or salvage value. Accordingly, where such... appropriate Army of Air Force command for disposal action under AR 405-90 or AFR 87-4 as appropriate. However... offered for sale which are more attractive improvements without an expenditure of Government funds. ...

  15. Large destructive facial hemangioma in PHACE syndrome

    Directory of Open Access Journals (Sweden)

    Nagdeve N

    2009-01-01

    Full Text Available We report an infant who presented with large facial hemangioma associated with Dandy-Walker cyst and atrial septal defect. This case is peculiar in that the large facial hemangioma in posterior fossa malformations, hemangiomas, arterial anomalies, coarctation of aorta and other cardiac defects (PHACE syndrome resulted in massive tissue destruction.

  16. Photocatalytic destruction of hexane eliminates emissions in contact lens manufacture

    Energy Technology Data Exchange (ETDEWEB)

    Kittrell, J.R.; Quinlan, C.W. [KSE, Inc., Amherst, MA (United States); Shepanzyk, J.W. [Schering-Plough Corp., Union, NJ (United States)

    1996-12-31

    Successful application of an emerging photocatalytic technology is described, to control industrial volatile organic compound (VOC) emissions of mixed hexanes in process exhaust air. The manufacture of disposable contact lenses includes batch solvent degreasing, using an aliphatic hydrocarbon solvent. VOC air emissions result from this degreasing operation. The batch degreasing process presents a demanding emissions control challenge, due to intermittent operations, high concentrations of aliphatic hydrocarbon, and highly variable flow rates and VOC concentrations. In plant operations discussed in this paper, VOC destruction efficiencies in excess of 99% were achieved, well beyond that required for regulatory compliance. The destruction of the aliphatic hydrocarbons was effected without formation of products of incomplete combustion (PIC`s). The system was effective and reliable, even with the heat release which resulted from the oxidation of elevated concentrations of aliphatic hydrocarbons. System features were incorporated which provide excellent system reliability. Rapid system response was demonstrated, ensuring effective performance in intermittent operations. Photocatalytic oxidation was shown to be cost-effective by analysis of capital investment requirements and operating expense, and was found to have economics superior to an alternative system based on carbon adsorption. 6 refs., 2 figs., 5 tabs.

  17. Processes of Fatigue Destruction in Nanopolymer-Hydrophobised Ceramic Bricks

    Directory of Open Access Journals (Sweden)

    Stanisław Fic

    2017-01-01

    Full Text Available The article presents a proposal of a model of fatigue destruction of hydrophobised ceramic brick, i.e., a basic masonry material. The brick surface was hydrophobised with two inorganic polymers: a nanopolymer preparation based on dialkyl siloxanes (series 1–5 and an aqueous silicon solution (series 6–10. Nanosilica was added to the polymers to enhance the stability of the film formed on the brick surface. To achieve an appropriate blend of the polymer liquid phase and the nano silica solid phase, the mixture was disintegrated by sonication. The effect of the addition of nano silica and sonication on changes in the rheological parameters, i.e., viscosity and surface tension, was determined. Material fatigue was induced by cyclic immersion of the samples in water and drying at a temperature of 100 °C, which caused rapid and relatively dynamic movement of water. The moisture and temperature effect was determined by measurement of changes in surface hardness performed with the Vickers method and assessment of sample absorbability. The results provided an approximate picture of fatigue destruction of brick and hydrophobic coatings in relation to changes in their temporal stability. Additionally, SEM images of hydrophobic coatings in are shown.

  18. Processes of Fatigue Destruction in Nanopolymer-Hydrophobised Ceramic Bricks.

    Science.gov (United States)

    Fic, Stanisław; Szewczak, Andrzej; Barnat-Hunek, Danuta; Łagód, Grzegorz

    2017-01-06

    The article presents a proposal of a model of fatigue destruction of hydrophobised ceramic brick, i.e., a basic masonry material. The brick surface was hydrophobised with two inorganic polymers: a nanopolymer preparation based on dialkyl siloxanes (series 1-5) and an aqueous silicon solution (series 6-10). Nanosilica was added to the polymers to enhance the stability of the film formed on the brick surface. To achieve an appropriate blend of the polymer liquid phase and the nano silica solid phase, the mixture was disintegrated by sonication. The effect of the addition of nano silica and sonication on changes in the rheological parameters, i.e., viscosity and surface tension, was determined. Material fatigue was induced by cyclic immersion of the samples in water and drying at a temperature of 100 °C, which caused rapid and relatively dynamic movement of water. The moisture and temperature effect was determined by measurement of changes in surface hardness performed with the Vickers method and assessment of sample absorbability. The results provided an approximate picture of fatigue destruction of brick and hydrophobic coatings in relation to changes in their temporal stability. Additionally, SEM images of hydrophobic coatings in are shown.

  19. Epithelial myoepithelial carcinoma in nasal cavity with bony destruction: A case report

    Energy Technology Data Exchange (ETDEWEB)

    Chung, Ho Jin; Lee, Byung Hoon; Hwang, Yoon Joon; Kim, Su Young [Dept. of Radiology, Ilsan Paik Hospital, Inje University School of Medicine, Goyang , (Korea, Republic of)

    2013-10-15

    Epithelial-myoepithelial carcinoma (EMC) is a rare tumor that commonly involves the salivary glands. EMC arising from the nasal cavity is one of the most unusual cases. We describe a case of a 48-year-old patient who is presented with bilateral nasal obstruction for several months. Multidetector computed tomography reveals expansile, well-defined, heterogeneous enhancing soft tissue masses filling the nasal cavity with bony destruction of hard palate and maxillary alveolar ridge. The carcinoma was histologically characterized by a mixture of trabecular structure with myoepithelial cells and ductal cells, which are confirmed by electron microscopy and immunohistochemistry.

  20. In situ non-destructive measurement of biofilm thickness and topology in an interferometric optical microscope

    Energy Technology Data Exchange (ETDEWEB)

    Larimer, Curtis [Pacific Northwest National Laboratory, Battelle for the USDOE, PO Box 999, MSIN P7-50 Richland WA 99354 USA; Suter, Jonathan D. [Pacific Northwest National Laboratory, Battelle for the USDOE, PO Box 999, MSIN P7-50 Richland WA 99354 USA; Bonheyo, George [Pacific Northwest National Laboratory, Battelle for the USDOE, PO Box 999, MSIN P7-50 Richland WA 99354 USA; Addleman, Raymond Shane [Pacific Northwest National Laboratory, Battelle for the USDOE, PO Box 999, MSIN P7-50 Richland WA 99354 USA

    2016-03-15

    Biofilms are ubiquitous and deleteriously impact a wide range of industrial processes, medical and dental health issues, and environmental problems such as transport of invasive species and the fuel efficiency of ocean going vessels. Biofilms are difficult to characterize when fully hydrated, especially in a non-destructive manner, because of their soft structure and water-like bulk properties. Herein we describe a non-destructive high resolution method of measuring and monitoring the thickness and topology of live biofilms of using white light interferometric optical microscopy. Using this technique, surface morphology, surface roughness, and biofilm thickness can be measured non-destructively and with high resolution as a function of time without disruption of the biofilm activity and processes. The thickness and surface topology of a P. putida biofilm were monitored growing from initial colonization to a mature biofilm. Typical bacterial growth curves were observed. Increase in surface roughness was a leading indicator of biofilm growth.

  1. Biological Soft Robotics.

    Science.gov (United States)

    Feinberg, Adam W

    2015-01-01

    In nature, nanometer-scale molecular motors are used to generate force within cells for diverse processes from transcription and transport to muscle contraction. This adaptability and scalability across wide temporal, spatial, and force regimes have spurred the development of biological soft robotic systems that seek to mimic and extend these capabilities. This review describes how molecular motors are hierarchically organized into larger-scale structures in order to provide a basic understanding of how these systems work in nature and the complexity and functionality we hope to replicate in biological soft robotics. These span the subcellular scale to macroscale, and this article focuses on the integration of biological components with synthetic materials, coupled with bioinspired robotic design. Key examples include nanoscale molecular motor-powered actuators, microscale bacteria-controlled devices, and macroscale muscle-powered robots that grasp, walk, and swim. Finally, the current challenges and future opportunities in the field are addressed.

  2. Fracture in Soft Materials

    DEFF Research Database (Denmark)

    Hassager, Ole

    Fracture is a phenomenon that is generally associated with solids. A key element in fracture theory is the so-called weakest link idea that fracture initiates from the largest pre-existing material imperfection. However, recent work has demonstrated that fracture can also happen in liquids, where...... surface tension will act to suppress such imperfections. Therefore, the weakest link idea does not seem immediately applicable to fracture in liquids. This presentation will review fracture in liquids and argue that fracture in soft liquids is a material property independent of pre-existing imperfections....... The following questions then emerge: What is the material description needed to predict crack initiation, crack speed and crack shape in soft materials and liquids....

  3. Soft Expert Sets

    Directory of Open Access Journals (Sweden)

    Shawkat Alkhazaleh

    2011-01-01

    Full Text Available In 1999, Molodtsov introduced the concept of soft set theory as a general mathematical tool for dealing with uncertainty. Many researchers have studied this theory, and they created some models to solve problems in decision making and medical diagnosis, but most of these models deal only with one expert. This causes a problem with the user, especially with those who use questionnaires in their work and studies. In our model, the user can know the opinion of all experts in one model. So, in this paper, we introduce the concept of a soft expert set, which will more effective and useful. We also define its basic operations, namely, complement, union intersection AND, and OR. Finally, we show an application of this concept in decision-making problem.

  4. Holiday fun with soft gluons

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    Emissions of soft gluons from energetic particles play an important role in collider processes. While the basic physics of soft emissions is simple, it gives rise to a variety of interesting and intricate phenomena (non-global logs, Glauber phases, super-leading logs, factorization breaking). After an introduction, I will review progress in resummation methods such as Soft-Collinear Effective Theory driven by a better understanding of soft emissions. I will also show some new results for computations of soft-gluon effects in gap-between-jets and isolation-cone cross sections.

  5. Fossilization of Soft Tissue in the Laboratory

    Science.gov (United States)

    Briggs, Derek E. G.; Kear, Amanda J.

    1993-03-01

    Some of the most remarkable fossils preserve cellular details of soft tissues. In many of these, the tissues have been replaced by calcium phosphate. This process has been assumed to require elevated concentrations of phosphate in sediment pore waters. In decay experiments modern shrimps became partially mineralized in amorphous calcium phosphate, preserving cellular details of muscle tissue, particularly in a system closed to oxygen. The source for the formation of calcium phosphate was the shrimp itself. Mineralization, which was accompanied by a drop in pH, commenced within 2 weeks and increased in extent for at least 4 to 8 weeks. This mechanism halts the normal loss of detail of soft-tissue morphology before fossilization. Similar closed conditions would prevail where organisms are rapidly overgrown by microbial mats.

  6. Reptile Soft Tissue Surgery.

    Science.gov (United States)

    Di Girolamo, Nicola; Mans, Christoph

    2016-01-01

    The surgical approach to reptiles can be challenging. Reptiles have unique physiologic, anatomic, and pathologic differences. This may result in frustrating surgical experiences. However, recent investigations provided novel, less invasive, surgical techniques. The purpose of this review was to describe the technical aspects behind soft tissue surgical techniques that have been used in reptiles, so as to provide a general guideline for veterinarians working with reptiles. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Categorical Properties of Soft Sets

    Directory of Open Access Journals (Sweden)

    Min Zhou

    2014-01-01

    Full Text Available The present study investigates some novel categorical properties of soft sets. By combining categorical theory with soft set theory, a categorical framework of soft set theory is established. It is proved that the category SFun of soft sets and soft functions has equalizers, finite products, pullbacks, and exponential properties. It is worth mentioning that we find that SFun is both a topological construct and Cartesian closed. The category SRel of soft sets and Z-soft set relations is also characterized, which shows the existence of the zero objects, biproducts, additive identities, injective objects, projective objects, injective hulls, and projective covers. Finally, by constructing proper adjoint situations, some intrinsic connections between SFun and SRel are established.

  8. Soft Ultrathin Electronics Innervated Adaptive Fully Soft Robots.

    Science.gov (United States)

    Wang, Chengjun; Sim, Kyoseung; Chen, Jin; Kim, Hojin; Rao, Zhoulyu; Li, Yuhang; Chen, Weiqiu; Song, Jizhou; Verduzco, Rafael; Yu, Cunjiang

    2018-02-05

    Soft robots outperform the conventional hard robots on significantly enhanced safety, adaptability, and complex motions. The development of fully soft robots, especially fully from smart soft materials to mimic soft animals, is still nascent. In addition, to date, existing soft robots cannot adapt themselves to the surrounding environment, i.e., sensing and adaptive motion or response, like animals. Here, compliant ultrathin sensing and actuating electronics innervated fully soft robots that can sense the environment and perform soft bodied crawling adaptively, mimicking an inchworm, are reported. The soft robots are constructed with actuators of open-mesh shaped ultrathin deformable heaters, sensors of single-crystal Si optoelectronic photodetectors, and thermally responsive artificial muscle of carbon-black-doped liquid-crystal elastomer (LCE-CB) nanocomposite. The results demonstrate that adaptive crawling locomotion can be realized through the conjugation of sensing and actuation, where the sensors sense the environment and actuators respond correspondingly to control the locomotion autonomously through regulating the deformation of LCE-CB bimorphs and the locomotion of the robots. The strategy of innervating soft sensing and actuating electronics with artificial muscles paves the way for the development of smart autonomous soft robots. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Streptococcal necrotizing fasciitis with toxic shock syndrome and rapid fatal outcome

    Directory of Open Access Journals (Sweden)

    Kojić Miroslav

    2015-01-01

    Full Text Available Introduction. Streptococcal necrotizing fasciitis (NF is a serious soft tissue infection with rapid progression of inflammatory process among superficial or deep fascia, systemic host response to infection leading to toxic shock syndrome (TSS, and multiple organ failure. Lethality is high. Case Outline. A 46-year-old male without co-morbidities was admitted to the Emergency Department with redness, swelling and pain on his right lower leg. He became sick two day s ea rlier with m alaise, chills and shivering. On admission he was hypotensive, anuric, with erythematous rash on his face, neck and chest, with acute ren al failure and elevated creatine phosphokinase level. During the next several hours, the changes on his right lower leg rapidly spread to the whole leg, followed by skin destruction and subcutaneo us bleeding, indicating NF. Aggressive antimicrobial, supportive and symptom atic therapy was initiated immediately and on the same evening surgical intervention was performed. Despite these measures, a rapid development of severe TSS, with lethal outcome, occurred in less than 40 hours after the admission. Stre ptococcus pyogenes (group A β-hemolytic Streptococcus was isolated from the throat, skin and tissue obtained duri ng the surgery. Conclusion. Necrotizing fasciitis is a very serious disease with unpre dictable course. For that reason doctors must devote a great deal of a ttention to early, i.e. timely diagnosis of this disease, whose treatment with a multid isciplinary approach is very important.

  10. Instant tough bonding of hydrogels for soft machines and electronics

    Science.gov (United States)

    Wirthl, Daniela; Pichler, Robert; Drack, Michael; Kettlguber, Gerald; Moser, Richard; Gerstmayr, Robert; Hartmann, Florian; Bradt, Elke; Kaltseis, Rainer; Siket, Christian M.; Schausberger, Stefan E.; Hild, Sabine; Bauer, Siegfried; Kaltenbrunner, Martin

    2017-01-01

    Introducing methods for instant tough bonding between hydrogels and antagonistic materials—from soft to hard—allows us to demonstrate elastic yet tough biomimetic devices and machines with a high level of complexity. Tough hydrogels strongly attach, within seconds, to plastics, elastomers, leather, bone, and metals, reaching unprecedented interfacial toughness exceeding 2000 J/m2. Healing of severed ionic hydrogel conductors becomes feasible and restores function instantly. Soft, transparent multilayered hybrids of elastomers and ionic hydrogels endure biaxial strain with more than 2000% increase in area, facilitating soft transducers, generators, and adaptive lenses. We demonstrate soft electronic devices, from stretchable batteries, self-powered compliant circuits, and autonomous electronic skin for triggered drug delivery. Our approach is applicable in rapid prototyping and in delicate environments inaccessible for extended curing and cross-linking. PMID:28691092

  11. From Soft Sculpture to Soft Robotics: Retracing a Physical Aesthetics of Bio-Morphic Softness

    DEFF Research Database (Denmark)

    Jørgensen, Jonas

    2017-01-01

    Soft robotics has in the past decade emerged as a growing subfield of technical robotics research, distinguishable by its bio-inspired design strategies, interest in morphological computation, and interdisciplinary combination of insights from engineering, computer science, biology and material...... science. Recently, soft robotics technology has also started to make its way into art, design, and architecture. This paper attempts to think an aesthetics of softness and the life-like through an artistic tradition deeply imbricated with an interrogation of softness and its physical substrates, namely...... and the life-like in these works through readings that draw on concepts from technical soft robotics research and the description of life in physics (via entropy). It is argued, that fractions of soft sculpture anticipate central interests and notions present in contemporary technical soft robotics research....

  12. EFFECTIVE SOURCE SIZES OF LOW RAPIDITY SOFT PARTICLE-EMISSION

    NARCIS (Netherlands)

    PEITZMANN, T; ALBRECHT, R; AWES, TC; BECKMANN, P; BERGER, F; BLOOMER, M; BLUME, C; BOCK, D; BOCK, R; CLAESSON, G; CLEWING, G; DRAGON, L; EKLUND, A; FERGUSON, RL; FRANZ, A; GARPMAN, S; GLASOW, R; GUSTAFSSON, HA; GUTBROD, HH; HOLKER, G; IDH, J; JACOBS, P; KAMPERT, KH; KOLB, BW; LOHNER, H; LUND, [No Value; OBENSHAIN, FE; OSKARSSON, A; OTTERLUND, [No Value; PLASIL, F; POSKANZER, AM; PURSCHKE, M; ROTERS, B; SAINI, S; SANTO, R; SCHMIDT, HR; SORENSEN, SP; STEFFENS, K; STEINHAEUSER, P; STENLUND, E; STUKEN, D; YOUNG, GR

    1994-01-01

    Correlations of positive pions and protons measured with the Plastic Ball detector in ultrarelativistic nucleus-nucleus collisions are studied. Source parameters are extracted for various projectile-target combinations. While the proton source can be explained by geometry, the pion source shows more

  13. Destructive aneurysmal bone cyst of the mandible.

    Science.gov (United States)

    de Santana Santos, Thiago; de Carvalho Raimundo, Ronaldo; Martins-Filho, Paulo Ricardo Saquete; de Souza de Andrade, Emanuel Sávio; de Oliveira E Silva, Emanuel Dias; Gomes, Ana Cláudia Amorim

    2013-03-01

    Aneurysmal bone cyst (ABC) is an uncommon osteolytic lesion of the bones, usually affecting the long bones and spine. The lesion is rare in the jaws and is found most commonly in the body and ramus of the mandible. In some cases, ABCs may be present as rdestructive lesions simulating malignancies. In these cases, a careful diagnosis should be done, including in the differential diagnosis malignant tumors such as telangiectasic osteosarcoma and intraosseous fibrosarcoma. Removing the lesion is usually easy if it is confined within the bone, but it may prove difficult if the lesions are multilocular, expansive, divided by multiple bony septa, or destructive or when the cortical is perforated. Therefore, the surgical treatment of the destructive ABCs should be more radical.

  14. Study of thermal destruction of lignin

    Energy Technology Data Exchange (ETDEWEB)

    Reti, M.; Hojnos, J.

    1979-01-01

    Using thermofractography, infra- and mass-spectrometry and other techniques thermal destruction of lignin was investigated at a temp. range of 200 to 500/sup 0/C. At temp. from 225 to 330/sup 0/C first of all splitting of ..beta..-aryil- and benzyl-ether binds between principal phenylpropane links of lignin, thus forming derivative phenols, vinyl guaiacol, coinferyl alcohol and aldehyde and respective syringic derivatives. At temp. of 350/sup 0/C splitting of C-C connections occurs in the lateral chain, forming guaiacol, 2,6-dimetoxiphenol and their saturated 4-alkyl derivatives. With a speeded up pyrolysis process, thermal destruction of lignin occurs at temp. of greater than or equal to 400/sup 0/C, with 62% of overall quantity derived at 500-550/sup 0/C with an overall tar release of about 30.

  15. Non-destructive imaging of optical nanofibres

    CERN Document Server

    Madsen, Lars S; Rubinsztein-Dunlop, Halina; Bowen, Warwick P

    2016-01-01

    Single-mode optical nanofibres are a central component of a broad range of applications and emerging technologies. Their fabrication has been extensively studied over the past decade, but imaging of the final sub-micrometre products has been restricted to destructive or low-precision techniques. Here we demonstrate an optical scattering-based scanning method that uses a probe nanofibre to locally scatter the evanescent field of a sample nanofibre. The method does not damage the sample nanofibre and is easily implemented only using the same equipment as in a standard fibre puller setup. We demonstrate sub-nanometre radial resolution at video rates (0.7 nm in 10 ms) on single mode nanofibres, allowing for a complete high-precision profile to be obtained within minutes of fabrication. The method thus enables non-destructive, fast and precise characterisation of optical nanofibers, with applications ranging from optical sensors and cold atom traps to non-linear optics.

  16. Topological Structure of Vague Soft Sets

    Directory of Open Access Journals (Sweden)

    Chang Wang

    2014-01-01

    Full Text Available We introduce vague soft topological spaces which are defined over an initial universe with a fixed set of parameters. The notions of vague soft open sets, vague soft closed sets, vague soft interior, vague soft closure, and vague soft boundary are introduced and their basic properties and relations are investigated. Furthermore, with the help of examples they established that some properties of topological spaces and soft topological spaces do not hold in vague soft topological spaces. Vague soft connectedness and vague soft compactness are also studied.

  17. Consumer showrooming: value co-destruction

    OpenAIRE

    Daunt, Kate; Harris, Lloyd

    2017-01-01

    Purpose This research employs value co-destruction as a theoretical lens to investigate the antecedents\\ud of consumer showrooming behavior. Drawing on relevant literature, a research model specifying\\ud showrooming dynamics from the consumer’s perspective is conceptualized and empirically tested.\\ud Methodology Utilizing survey data from 275 consumers, structural equation modelling is employed\\ud to assess a research model including thirteen hypotheses.\\ud Findings The study findings reveal ...

  18. Non-destructive profilometry of optical nanofibres

    OpenAIRE

    Madsen, Lars S.; Baker, Christopher; Rubinsztein-Dunlop, Halina; Bowen, Warwick P.

    2016-01-01

    Single-mode optical nanofibres are a central component of a broad range of applications and emerging technologies. Their fabrication has been extensively studied over the past decade, but imaging of the final sub-micrometre products has been restricted to destructive or low-precision techniques. Here we demonstrate an optical scattering-based scanning method that uses a probe nanofibre to locally scatter the evanescent field of a sample nanofibre. The method does not damage the sample nanofib...

  19. Characterizing Destructive Quantum Interference in Electron Transport

    OpenAIRE

    Sam-ang, Panu; Reuter, Matthew G.

    2017-01-01

    Destructive quantum interference in electron transport through molecules provides an unconventional route for suppressing electric current. In this work we introduce "interference vectors" for each interference and use them to characterize the interference. An interference vector may be an orbital of the bare molecule, in which case the interference is very sensitive to perturbation. In contrast, an interference vector may be a combination of multiple molecular orbitals, leading to more robus...

  20. [Computer tomographic findings in sacral destruction].

    Science.gov (United States)

    Heller, M; Grabbe, E; Hagemann, J; Jend, H H

    1981-06-01

    The diagnostic significance of computerized tomography in the diagnosis of destructive and deforming processes of the sacrum is demonstrated by means of 69 examinations of 55 patients. The results are compared with those obtained by means of conventional roentgenography, including tomography and bone scintigraphy. It is confirmed that recent CT scanners are the most sensitive instruments in existence for the visualization of affections of the sacrum in respect to identification and extension.

  1. Catalytic Destruction of Chlorinated Volatile Organic Compounds

    Science.gov (United States)

    1993-08-01

    13X Molecular Sieve," J. Catal.. 50, 390 (1977). 48. Poutsma, M. L., in " Zeolite Chemistry and Catalysis", ACS Monograph 171 (Ed: Rabo, J. A...DISTRIBUTION CODE 13. A.BSTRACT (Maximum,200 words) , _ _ . _ This report gives test results for 14 different cation-modifled zeolite catalysts, all of...found that the most active cat- alysts for destruction of One-carbon VOCs were cobalt exchanged Y- zeolites , while for two-carbon VOCs, the presence

  2. On Soft β-Open Sets and Soft β-Continuous Functions

    Directory of Open Access Journals (Sweden)

    Metin Akdag

    2014-01-01

    Full Text Available We introduce the concepts soft β-interior and soft β-closure of a soft set in soft topological spaces. We also study soft β-continuous functions and discuss their relations with soft continuous and other weaker forms of soft continuous functions.

  3. Soft Condensed Matter

    Energy Technology Data Exchange (ETDEWEB)

    Jones, Richard A L

    2002-11-20

    The author states in the preface of the book that the aim is '...to give a unified overview of the various aspects of the physics of soft condensed matter'. The book succeeds in fulfilling this aim in many respects. The style is fluent and concise and gives the necessary explanations to make its content understandable to people with some knowledge of the basic principles of physics. The content of the book is complete enough to give a panoramic view of the landscape of soft condensed matter. The first two chapters give, respectively, a short introduction and a presentation of forces, energies and timescales, giving a general overview and pointing out the particular importance of different aspects such as timescales, which are much more important in soft condensed matter than in traditional or 'hard' condensed matter. The next chapter, devoted to phase transition, recalls that the equilibrium between two phases is controlled by free energy considerations. Spinodal decomposition is presented as a counterpart of nucleation and growth. Again, characteristic length scales are considered and applied to a phase separation mixture of polymers in a common solvent. The following three chapters are devoted respectively to specific topics: colloidal dispersion, polymers and gelation. The stability and phase behaviour of colloids are related to the interaction between colloidal particles. Properties of colloidal crystals as well as colloidal dispersion are depicted in terms of stabilization of crystalline colloids. The flow properties of colloidal dispersion are presented in terms of free energy minimization and the structure of the dispersion. After a brief introduction to polymer chemistry and architecture, the coil-globule transition is discussed. Viscoelasticity of polymers is described and discussed by introducing the notion of entanglement. This leads to the introduction of the tube model and the theory of reptation. The sol-gel transition is presented

  4. The effect of long term storage on bacterial soft rot resistance in potato

    Science.gov (United States)

    Bacterial soft rot is a serious disease in potato (Solanum tuberosum L.), causing rapid tuber tissue maceration and, consequently, marketable yield loss. Soft rot bacteria, especially Pectobacterium carotovorum subsp. carotovorum (Pbc), are favored by moist conditions, which are prevalent in large p...

  5. Elastic Cherenkov effects in transversely isotropic soft materials-I: Theoretical analysis, simulations and inverse method

    Science.gov (United States)

    Li, Guo-Yang; Zheng, Yang; Liu, Yanlin; Destrade, Michel; Cao, Yanping

    2016-11-01

    A body force concentrated at a point and moving at a high speed can induce shear-wave Mach cones in dusty-plasma crystals or soft materials, as observed experimentally and named the elastic Cherenkov effect (ECE). The ECE in soft materials forms the basis of the supersonic shear imaging (SSI) technique, an ultrasound-based dynamic elastography method applied in clinics in recent years. Previous studies on the ECE in soft materials have focused on isotropic material models. In this paper, we investigate the existence and key features of the ECE in anisotropic soft media, by using both theoretical analysis and finite element (FE) simulations, and we apply the results to the non-invasive and non-destructive characterization of biological soft tissues. We also theoretically study the characteristics of the shear waves induced in a deformed hyperelastic anisotropic soft material by a source moving with high speed, considering that contact between the ultrasound probe and the soft tissue may lead to finite deformation. On the basis of our theoretical analysis and numerical simulations, we propose an inverse approach to infer both the anisotropic and hyperelastic parameters of incompressible transversely isotropic (TI) soft materials. Finally, we investigate the properties of the solutions to the inverse problem by deriving the condition numbers in analytical form and performing numerical experiments. In Part II of the paper, both ex vivo and in vivo experiments are conducted to demonstrate the applicability of the inverse method in practical use.

  6. Embodying Soft Wearables Research

    DEFF Research Database (Denmark)

    Tomico, Oscar; Wilde, Danielle

    2016-01-01

    The value of engaging sensory motor skills in the design and use of smart systems is increasingly recognized. Yet robust and reliable methods for development, reporting and transfer are not fully understood. This workshop investigates the role of embodied design research techniques in the context...... of soft wearables. Throughout, we will experiment with how embodied design research techniques might be shared, developed, and used as direct and unmediated vehicles for their own reporting. Rather than engage in oral presentations, participants will lead each other through a proven embodied method...

  7. Destructive Single-Event Failures in Schottky Diodes

    Science.gov (United States)

    Casey, Megan C.; Lauenstein, Jean-Marie; Gigliuto, Robert A.; Wilcox, Edward P.; Phan, Anthony M.; Kim, Hak; Chen, Dakai; LaBel, Kenneth A.

    2014-01-01

    This presentation contains test results for destructive failures in DC-DC converters. We have shown that Schottky diodes are susceptible to destructive single-event effects. Future work will be completed to identify parameter that determines diode susceptibility.

  8. Universal transverse momentum dependent soft function at NNLO

    NARCIS (Netherlands)

    Garcia, M.; Scimemi, I.; Vladimirov, A.

    2016-01-01

    All (un)polarized transverse momentum dependent functions (TMDs), both distribution and fragmentation functions, are defined with the same universal soft function, which cancels spurious rapidity divergences within an individual TMD and renders them well-defined hadronic quantities. Moreover, it is

  9. Soft skills and dental education.

    Science.gov (United States)

    Gonzalez, M A G; Abu Kasim, N H; Naimie, Z

    2013-05-01

    Soft skills and hard skills are essential in the practice of dentistry. While hard skills deal with technical proficiency, soft skills relate to a personal values and interpersonal skills that determine a person's ability to fit in a particular situation. These skills contribute to the success of organisations that deal face-to-face with clients. Effective soft skills benefit the dental practice. However, the teaching of soft skills remains a challenge to dental schools. This paper discusses the different soft skills, how they are taught and assessed and the issues that need to be addressed in their teaching and assessment. The use of the module by the Faculty of Dentistry, University of Malaya for development of soft skills for institutions of higher learning introduced by the Ministry of Higher Education, Malaysia. © 2013 John Wiley & Sons A/S. Published by Blackwell Publishing Ltd.

  10. Fundamentals of soft robot locomotion.

    Science.gov (United States)

    Calisti, M; Picardi, G; Laschi, C

    2017-05-01

    Soft robotics and its related technologies enable robot abilities in several robotics domains including, but not exclusively related to, manipulation, manufacturing, human-robot interaction and locomotion. Although field applications have emerged for soft manipulation and human-robot interaction, mobile soft robots appear to remain in the research stage, involving the somehow conflictual goals of having a deformable body and exerting forces on the environment to achieve locomotion. This paper aims to provide a reference guide for researchers approaching mobile soft robotics, to describe the underlying principles of soft robot locomotion with its pros and cons, and to envisage applications and further developments for mobile soft robotics. © 2017 The Author(s).

  11. Tobacco smoking and chronic destructive periodontal disease.

    Science.gov (United States)

    Bergström, Jan

    2004-09-01

    Tobacco smoking is the main risk factor associated with chronic destructive periodontal disease. No other known factor can match the strength of smoking in causing harm to the periodontium. The harmful effects manifest themselves by interfering with vascular and immunologic reactions, as well as by undermining the supportive functions of the periodontal tissues. The typical characteristic of smoking-associated periodontal disease is the destruction of the supporting tissues of the teeth, with the ensuing clinical symptoms of bone loss, attachment loss, pocket formation, and eventually tooth loss. A review of the international literature that has accumulated over the past 20 years offers convincing evidence that smokers exhibit greater bone loss and attachment loss, as well as more pronounced frequencies of periodontal pockets, than non-smokers do. In addition, tooth loss is more extensive in smokers. Smoking, thus, considerably increases the risk for destructive periodontal disease. Depending on the definition of disease and the exposure to smoking, the risk is 5- to 20-fold elevated for a smoker compared to a never-smoker. For a smoker exposed to heavy long-life smoking, the risk of attracting destructive periodontal disease is equivalent to that of attracting lung cancer. The outcome of periodontal treatment is less favorable or even unfavorable in smokers. Although long-term studies are rare, available studies unanimously agree that treatment failures and relapse of disease are predominantly seen in smokers. This contention is valid irrespective of treatment modality, suggesting that smoking will interfere with an expected normal outcome following commonplace periodontal therapies. The majority of available studies agree that the subgingival microflora of smokers and non-smokers are no different given other conditions. As a consequence, the elevated morbidity in smokers does not depend on particular microflora. The mechanisms behind the destructive effects of

  12. Fundamentals of soft robot locomotion

    OpenAIRE

    Calisti, M.; Picardi, G.; Laschi, C.

    2017-01-01

    Soft robotics and its related technologies enable robot abilities in several robotics domains including, but not exclusively related to, manipulation, manufacturing, human���robot interaction and locomotion. Although field applications have emerged for soft manipulation and human���robot interaction, mobile soft robots appear to remain in the research stage, involving the somehow conflictual goals of having a deformable body and exerting forces on the environment to achieve locomotion. This p...

  13. Bone mineral density in patients with destructive arthrosis of the hip joint.

    Science.gov (United States)

    Okano, Kunihiko; Aoyagi, Kiyoshi; Enomoto, Hiroshi; Osaki, Makoto; Chiba, Ko; Yamaguchi, Kazumasa

    2014-05-01

    Recent reports have shown the existence of subchondral insufficiency fracture in rapidly destructive arthrosis of the hip joint (RDA), and the findings suggest that osteopenia is related to the pathogenesis of the rapid progression of this disease. Therefore, we measured bone mineral density (BMD) in RDA patients. We measured BMD of the lumbar spine, radius, and calcaneus using dual-energy X-ray absorptiometry in 19 patients with RDA and 75 with osteoarthritis of the hip (OA) and compared BMD at different skeletal sites between RDA and OA patients. No significant differences were observed in BMD of the lumbar spine, ultradistal radius, mid-radius, and calcaneous between the RDA and OA groups. Our data suggest that RDA is not accompanied by generalized osteoporosis. Factors other than generalized bone status, for example, BMD around the affected hip joint before destruction, need to be analyzed to elucidate the pathophysiological mechanism of RDA.

  14. Modeling Soft Matter

    Science.gov (United States)

    Kremer, Kurt

    Soft matter science or soft materials science is a relatively new term for the science of a huge class of rather different materials such as colloids, polymers (of synthetic or biological origin), membranes, complex molecular assemblies, complex fluids, etc. and combinations thereof. While many of these systems are contained in or are even the essential part of everyday products ("simple" plastics such as yoghurt cups, plastic bags, CDs, many car parts; gels and networks such as rubber, many low fat foods, "gummi" bears; colloidal systems such as milk, mayonnaise, paints, almost all cosmetics or body care products, the border lines between the different applications and systems are of course not sharp) or as biological molecules or assemblies (DNA, proteins, membranes and cytoskeleton, etc.) are central to our existence, others are basic ingredients of current and future high tech products (polymers with specific optical or electronic properties, conducting macromolecules, functional materials). Though the motivation is different in life science rather than in materials science biomolecular simulations, the basic structure of the problems faced in the two fields is very similar.

  15. Soft Robotic Actuators

    Science.gov (United States)

    Godfrey, Juleon Taylor

    In this thesis a survey on soft robotic actuators is conducted. The actuators are classified into three main categories: Pneumatic Artificial Muscles (PAM), Electronic Electroactive Polymers (Electric EAP), and Ionic Electroactive Polymers (Ionic EAP). Soft robots can have many degrees and are more compliant than hard robots. This makes them suitable for applications that are difficult for hard robots. For each actuator background history, build materials, how they operate, and modeling are presented. Multiple actuators in each class are reviewed highlighting both their use and their mathematical formulation. In addition to the survey the McKibben actuator was chosen for fabrication and in-depth experimental analysis. Four McKibben actuators were fabricated using mesh sleeve, barbed hose fittings, and different elastic bladders. All were actuated using compressed air. Tensile tests were performed for each actuator to measure the tension force as air pressure increased from 20 to 100 psi in 10 psi increments. To account for material relaxation properties eleven trials for each actuator were run for 2-3 days. In conclusion, the smallest outer diameter elastic bladder was capable of producing the highest force due to the larger gap between the bladder and the sleeve.

  16. The Tactile Ethics of Soft Robotics: Designing Wisely for Human-Robot Interaction.

    Science.gov (United States)

    Arnold, Thomas; Scheutz, Matthias

    2017-06-01

    Soft robots promise an exciting design trajectory in the field of robotics and human-robot interaction (HRI), promising more adaptive, resilient movement within environments as well as a safer, more sensitive interface for the objects or agents the robot encounters. In particular, tactile HRI is a critical dimension for designers to consider, especially given the onrush of assistive and companion robots into our society. In this article, we propose to surface an important set of ethical challenges for the field of soft robotics to meet. Tactile HRI strongly suggests that soft-bodied robots balance tactile engagement against emotional manipulation, model intimacy on the bonding with a tool not with a person, and deflect users from personally and socially destructive behavior the soft bodies and surfaces could normally entice.

  17. Computational dynamics of soft machines

    Science.gov (United States)

    Hu, Haiyan; Tian, Qiang; Liu, Cheng

    2017-06-01

    Soft machine refers to a kind of mechanical system made of soft materials to complete sophisticated missions, such as handling a fragile object and crawling along a narrow tunnel corner, under low cost control and actuation. Hence, soft machines have raised great challenges to computational dynamics. In this review article, recent studies of the authors on the dynamic modeling, numerical simulation, and experimental validation of soft machines are summarized in the framework of multibody system dynamics. The dynamic modeling approaches are presented first for the geometric nonlinearities of coupled overall motions and large deformations of a soft component, the physical nonlinearities of a soft component made of hyperelastic or elastoplastic materials, and the frictional contacts/impacts of soft components, respectively. Then the computation approach is outlined for the dynamic simulation of soft machines governed by a set of differential-algebraic equations of very high dimensions, with an emphasis on the efficient computations of the nonlinear elastic force vector of finite elements. The validations of the proposed approaches are given via three case studies, including the locomotion of a soft quadrupedal robot, the spinning deployment of a solar sail of a spacecraft, and the deployment of a mesh reflector of a satellite antenna, as well as the corresponding experimental studies. Finally, some remarks are made for future studies.

  18. Destructive and non-destructive evaluation methods of interface on F82H HIPed joints

    Energy Technology Data Exchange (ETDEWEB)

    Kishimoto, Hirotatsu, E-mail: hkishi@mmm.muroran-it.ac.jp [OASIS, Muroran Institute of Technology, 27-1, Muroran, Hokkaido (Japan); Graduate School, Muroran Institute of Technology, 27-1, Muroran, Hokkaido (Japan); Muramatsu, Yusuke [Graduate School, Muroran Institute of Technology, 27-1, Muroran, Hokkaido (Japan); Asakura, Yuki [OASIS, Muroran Institute of Technology, 27-1, Muroran, Hokkaido (Japan); Graduate School, Muroran Institute of Technology, 27-1, Muroran, Hokkaido (Japan); Endo, Tetsuo [Graduate School, Muroran Institute of Technology, 27-1, Muroran, Hokkaido (Japan); Kohyama, Akira [OASIS, Muroran Institute of Technology, 27-1, Muroran, Hokkaido (Japan)

    2016-11-01

    Highlights: • The first wall of F82H steel will be fabricated by the HIP method. • Inspection techniques need to be developed for the HIPed interface. • Both destructive and non-destructive inspection techniques are introduced. - Abstract: The first walls of F82H steel with built-in cooling channels will be assembled thin plates and rectangular pipes by a HIP method. Silicon oxides form on an interface of HIPed joints during HIPing and result in the lowering of toughness of the HIPed joints. A large issue is investigation method of HIPed interface. The flexibility of specimen size for the investigation will be necessary because of the thin wall of cooling channels. A small specimen destructive test technique which is able to distinguish a base metal and an excellent HIPed joint has been desired, and recent researches find out a torsion test method to solve the issue. Non-destructive test technique is another issue for the inspection of the first wall. An ultrasonic inspection method is a candidate but silicon oxides are too small to produce good flaw echo from oxides, some solutions will be necessary. Present research introduces the current status of development of small specimen destructive test technique and the ultrasonic method for the first wall inspection.

  19. Non-touch, Quick Destruction of the Tracheal Occluding Balloon Using HIFU

    OpenAIRE

    OSAWA Shunsuke:筆頭著者; SATO Tomoo; YAMASHITA Hiromasa; MOCHIZUKI Takashi; KITAZUMI Gontaro; JANI Jacques; TOKI Akira; CHIBA Toshio

    2017-01-01

    The technique of fetal endoscopic tracheal occlusion (FETO) was developed to totally occlude the fetal trachea using an intratracheal balloon in the treatment of congenital diaphragmatic hernia with lung hypoplasia. To improve this approach, we developed a method for non-contact, rapid destruction of the balloon using high intensity focused ultrasound (HIFU), a specific balloon injection fluid, and euthanized rabbits (1kg). In an initial experiment (5rabbits), we inflated an intratracheal bal...

  20. A systematic examination of the bone destruction pattern of the two-shot technique

    Directory of Open Access Journals (Sweden)

    Marcus Stoetzer

    2014-01-01

    Full Text Available Introduction: The two-shot technique is an effective stopping power method. The precise mechanisms of action on the bone and soft-tissue structures of the skull; however, remain largely unclear. The aim of this study is to compare the terminal ballistics of the two-shot and single-shot techniques. Materials and Methods: 40 fresh pigs′ heads were randomly divided into 4 groups (n = 10. Either a single shot or two shots were fired at each head with a full metal jacket or a semi-jacketed bullet. Using thin-layer computed tomography and photography, the diameter of the destruction pattern and the fractures along the bullet path were then imaged and assessed. Results: A single shot fired with a full metal jacket bullet causes minor lateral destruction along the bullet path. With two shots fired with a full metal jacket bullet, however, the maximum diameter of the bullet path is significantly greater (P < 0.05 than it is with a single shot fired with a full metal jacket bullet. In contrast, the maximum diameter with a semi-jacketed bullet is similar with the single-shot and two-shot techniques. Conclusion: With the two-shot technique, a full metal jacket bullet causes a destruction pattern that is comparable to that of a single shot fired with a semi-jacketed bullet.

  1. FIRST 100 T NON-DESTRUCTIVE MAGNET

    Energy Technology Data Exchange (ETDEWEB)

    J. R. SIMS; ET AL

    1999-10-01

    The first 100 T non-destructive (100 T ND) magnet and power supplies as currently designed are described. This magnet will be installed as part of the user facility research equipment at the National High Magnetic Field Laboratory (NHMFL) Pulsed Field Facility at Los Alamos National Laboratory. The 100 T ND magnet will provide a 100 T pulsed field of 5 ms duration (above 90% of full field) in a 15 mm diameter bore once per hour. Magnet operation will be non-destructive. The magnet will consist of a controlled power outer coil set which produces a 47 T platform field in a 225 mm diameter bore. Located within the outer coil set will be a 220 mm outer diameter capacitor powered insert coil. Using inertial energy storage a synchronous motor/generator will provide ac power to a set of seven ac-dc converters rated at 64 MW/80 MVA each. These converters will energize three independent coil circuits to create 170 MJ of field energy in the outer coil set at the platform field of 47 T. The insert will then be energized to produce the balance of the 100 T peak field using a 2.3 MJ, 18 kV (charged to 15 kV), 14.4 mF capacitor bank controlled with solid-state switches. The magnet will be the first of its kind and the first non-destructive, reusable 100 T pulsed magnet. The operation of the magnet will be described along with special features of its design and construction.

  2. Interval-Valued Neutrosophic Soft Rough Sets

    Directory of Open Access Journals (Sweden)

    Said Broumi

    2015-01-01

    Full Text Available We first defined interval-valued neutrosophic soft rough sets (IVN-soft rough sets for short which combine interval-valued neutrosophic soft set and rough sets and studied some of its basic properties. This concept is an extension of interval-valued intuitionistic fuzzy soft rough sets (IVIF-soft rough sets.

  3. Biologic and chemical weapons of mass destruction.

    Science.gov (United States)

    Bozeman, William P; Dilbero, Deanna; Schauben, Jay L

    2002-11-01

    Weapons of mass destruction (WMDs) are capable of producing massive casualties and are typically grouped into nuclear, biologic, and chemical weapons. In the wake of the September 11th disasters, attention to terrorist groups and the potential for use of WMDs has increased. Biologic and chemical weapons are relatively accessible and inexpensive to develop, and are thought to be the most available to foreign states and subnational terrorist groups. This article reviews various biologic and chemical weapons, including emergency diagnosis and management of selected agents.

  4. D.H. Lawrence and modern destructiveness.

    Science.gov (United States)

    Gutierrez, D

    1980-01-01

    This article discusses twentieth century societal destructiveness as reflected in four key prose works by D.H. Lawrence--the novels Sons and Lovers, Women in Love, Lady Chatterley's Lover and the early travel book Twilight in Italy. Sons and Lovers, which projects the young Lawrence persona's struggle between life and death, partly accounts for a deepening sensitivity to life and death in modern society in Lawrence's subsequent works. It is seen that Lawrence's writings depict the perilous trends today towards the mechanization of our fundamental being, and the resultant life-threatening qualities of sensationalism and reduction of the individual inner life.

  5. Soft isostasy in geomorphology

    Directory of Open Access Journals (Sweden)

    Mohsen Pourkhosravani

    2012-01-01

    Full Text Available Earth subsidence has been one of the important issues jeopardizing environment and there are many studies, which blame shortage of underground water resources for having uplift and subsidence. However, many argue such conclusion and believe that earth subsidence has been studied in the past without considering the changes in the hill over a long period. In this study, we use SAR interferometry study to investigate earth subsidence in dessert areas of Esfahan, Yazd and Ardakan, located in central part of Iran. The results indicate that there are more important issues affecting subsidence such as the uplift in the hills located the desert area. The results of the survey based on SAR interferometry reveals that subsidence occurs with the uplift in the adjacent hills, simultaneously. In other words, tectonic movements and soft isostasy play important role on earth subsidence.

  6. Soft matter physics

    CERN Document Server

    Williams, Claudine

    1999-01-01

    What do colloids, fractals, liquid crystals, and polymers have in common? Nothing at first sight. Yet the distance scales, the energy transfers, the way these objects react to an external field are very similar. For the first time, this book offers an introduction to the physics of these soft materials in one single volume. A variety of experiments and concepts are presented, including the phenomena of capillarity and wetting, fractals, small volumes and large surfaces, colloids, surfactants, giant micelles and fluid membranes, polymers, and liquid crystals. Each chapter is written by experts in the field with the aim of making the book accessible to the widest possible scientific audience: graduate students, lecturers, and research scientists in physics, chemistry, and other disciplines. Nobel Prize winner Pierre-Gilles de Gennes inspired this book and has written a foreword.

  7. PENGEMBANGAN SOFT SKILL GURU

    Directory of Open Access Journals (Sweden)

    Jaenuri Jaenuri

    2017-06-01

    Full Text Available Soft skill is a skill of person that build relationships with others and self-organizing skills. Teachers as a determinant of the potential development of students is not enough can only teach (transfer of knowledge. Moreover, the teacher as a model for the student must have a good personality and social. So teachers are required to develop continuously the ability of personality (intra personal skills and social skills (inter personal skills. The development of intra personal skills includes: developing the power of consciousness, goals, beliefs, love, concentration, and decisions. The development of interpersonal skills includes: many smiles, appreciative, active listener, active cooperate, mediator, communication ability, humor, empathy, and not easy to complain.

  8. Soft-collinear supersymmetry

    Energy Technology Data Exchange (ETDEWEB)

    Cohen, Timothy [Institute of Theoretical Science, University of Oregon,Eugene, OR 97403 (United States); Elor, Gilly [Institute of Theoretical Science, University of Oregon,Eugene, OR 97403 (United States); Center for Theoretical Physics, Massachusetts Institute of Technology,Cambridge, MA 02139 (United States); Larkoski, Andrew J. [Physics Department, Reed College,Portland, OR 97202 (United States); Center for Fundamental Laws of Nature, Harvard University,Cambridge, MA 02138 (United States)

    2017-03-03

    Soft-Collinear Effective Theory (SCET) is a framework for modeling the infrared structure of theories whose long distance behavior is dominated by soft and collinear divergences. This paper demonstrates that SCET can be made compatible with supersymmetry (SUSY). Explicitly, the effective Lagrangian for N=1 SUSY Yang-Mills is constructed and shown to be a complete description for the infrared of this model. For contrast, we also construct the effective Lagrangian for chiral SUSY theories with Yukawa couplings, specifically the single flavor Wess-Zumino model. Only a subset of the infrared divergences are reproduced by the Lagrangian — to account for the complete low energy description requires the inclusion of local operators. SCET is formulated by expanding fields along a light-like direction and then subsequently integrating out degrees-of-freedom that are away from the light-cone. Defining the theory with respect to a specific frame obfuscates Lorentz invariance — given that SUSY is a space-time symmetry, this presents a possible obstruction. The cleanest language with which to expose the congruence between SUSY and SCET requires exploring two novel formalisms: collinear fermions as two-component Weyl spinors, and SCET in light-cone gauge. By expressing SUSY Yang-Mills in “collinear superspace', a slice of superspace derived by integrating out half the fermionic coordinates, the light-cone gauge SUSY SCET theory can be written in terms of superfields. As a byproduct, bootstrapping up to the full theory yields the first algorithmic approach for determining the SUSY Yang-Mills on-shell superspace action. This work paves the way toward discovering the effective theory for the collinear limit of N=4 SUSY Yang-Mills.

  9. Soft tissue sparganosis

    Energy Technology Data Exchange (ETDEWEB)

    Park, Ki Soon; Lee, Yul; Chung, Soo Young; Park, Choong Ki; Lee, Kwan Sup [Hallym University College of Medicine, Seoul (Korea, Republic of); Cho, In Hwan; Suh, Hyoung Sim [Daelin S. Mary' s Hospital, Seoul (Korea, Republic of)

    1993-11-15

    Sparganosis is a rare tissue-parasitic infestation caused by a plerocercoid tapeworm larva(sparganum), genus Spirometra. The most common clinical presentation of sparganosis is a palpable subcutaneous mass or masses. Fifteen simple radiographs and 10 ultrasosnograms of 17 patients with operatively verified subcutaneous sparganosis were retrospectively analyzed to find its radiologic characteristics for preoperative diagnosis of sparganosis. The location of the subcutaneous sparganosis were lower extremity, abdominal wall, breast, inguinal region and scrotum in order of frequency. The simple radiographs showed linear or elongated calcification with or without nodular elongated shaped soft tissue mass shadows in 8 patients, soft tissue mass shadow only in 2 patients and lateral abdominal wall thickening in 1 patient. But no specific findings was noted in 4 patients with small abdominal and inguinal masses. We could classify the subcutaneous sparganosis by ultrasound into 2 types: one is long band-like hypoechoic structures, corresponding to the subcutaneous tunnel-like tracks formed by migration of sparganum larva and the order is elongated or ovoid hyperechoic nodules, representing granulomas. Long band-like hypoechoic structures within or associated with mixed echoic granulomatous masses were noted in 6 patients and elongated or ovoid hypoechoic mass or masses were noted in 4 patients. In conclusion, sparganosis should be considered when these radiologic findings-irregular linear calcifications on simple radiograph and long band-like hypoechoic structures on ultrasonography, corresponding to the subcutaneous tunnel-like tracks formed by migration of sparganum larva are noted in the patients who have subcutaneous palpable mass or masses. And radiologic examination especially ultrasonography is very helpful to diagnose sparganosis.

  10. Soft-collinear supersymmetry

    Science.gov (United States)

    Cohen, Timothy; Elor, Gilly; Larkoski, Andrew J.

    2017-03-01

    Soft-Collinear Effective Theory (SCET) is a framework for modeling the infrared structure of theories whose long distance behavior is dominated by soft and collinear divergences. This paper demonstrates that SCET can be made compatible with super-symmetry (SUSY). Explicitly, the effective Lagrangian for N=1 SUSY Yang-Mills is cconstructed and shown to be a complete description for the infrared of this model. For contrast, we also construct the effective Lagrangian for chiral SUSY theories with Yukawa couplings, specifically the single flavor Wess-Zumino model. Only a subset of the infrared divergences are reproduced by the Lagrangian — to account for the complete low energy description requires the inclusion of local operators. SCET is formulated by expanding fields along a light-like direction and then subsequently integrating out degrees-of-freedom that are away from the light-cone. Defining the theory with respect to a specific frame obfuscates Lorentz invariance — given that SUSY is a space-time symmetry, this presents a possible obstruction. The cleanest language with which to expose the congruence be-tween SUSY and SCET requires exploring two novel formalisms: collinear fermions as two-component Weyl spinors, and SCET in light-cone gauge. By expressing SUSY Yang-Mills in "collinear superspace", a slice of superspace derived by integrating out half the fermionic coordinates, the light-cone gauge SUSY SCET theory can be written in terms of superfields. As a byproduct, bootstrapping up to the full theory yields the first algorithmic approach for determining the SUSY Yang-Mills on-shell superspace action. This work paves the way toward discovering the effective theory for the collinear limit of N=4 SUSY Yang-Mills.

  11. A thermo-elastoplastic model for soft rocks considering structure

    Science.gov (United States)

    He, Zuoyue; Zhang, Sheng; Teng, Jidong; Xiong, Yonglin

    2017-11-01

    In the fields of nuclear waste geological deposit, geothermy and deep mining, the effects of temperature on the mechanical behaviors of soft rocks cannot be neglected. Experimental data in the literature also showed that the structure of soft rocks cannot be ignored. Based on the superloading yield surface and the concept of temperature-deduced equivalent stress, a thermo-elastoplastic model for soft rocks is proposed considering the structure. Compared to the superloading yield surface, only one parameter is added, i.e. the linear thermal expansion coefficient. The predicted results and the comparisons with experimental data in the literature show that the proposed model is capable of simultaneously describing heat increase and heat decrease of soft rocks. A stronger initial structure leads to a greater strength of the soft rocks. Heat increase and heat decrease can be converted between each other due to the change of the initial structure of soft rocks. Furthermore, regardless of the heat increase or heat decrease, a larger linear thermal expansion coefficient or a greater temperature always leads to a much rapider degradation of the structure. The degradation trend will be more obvious for the coupled greater values of linear thermal expansion coefficient and temperature. Lastly, compared to heat decrease, the structure will degrade more easily in the case of heat increase.

  12. Not-so-Soft Skills

    Science.gov (United States)

    Curran, Mary

    2010-01-01

    Much recent discussion about the skills needed to secure Britain's economic recovery has focused on skills for employability. However, too often, these fundamental skills are understood in narrow functional or vocational terms. So-called "soft skills", what Penelope Tobin, in her 2008 paper "Soft Skills: the hard facts", terms "traits and…

  13. Nonlinear dynamics of soft fermion excitations in hot QCD plasma I: soft-quark - soft-gluon scattering

    OpenAIRE

    Markov, Yu. A.; Markova, M. A.

    2005-01-01

    Within the framework of the hard thermal loop effective theory we derive a system of Boltzmann-like kinetic equations taking into account the simplest processes of nonlinear interaction of soft fermionic and bosonic QCD plasma excitations: elastic scattering of soft-(anti)quark excitations off soft-gluon and soft-quark excitations, pair production of soft quark-antiquark excitations, annihilation into two soft-gluon excitations. The matrix elements of these processes to leading order in the c...

  14. [Destruction of tattoo by ruby laser].

    Science.gov (United States)

    Serres, P; Gaignebet, J; Hattat, J L; Compain, P; Vire, O; Despres, S

    1991-01-01

    The originality of tattoo destruction by ruby laser is to selectively treat the tattooed areas without injuring the surrounding normal cells, in order to obtain better healing. Therefore, we selected a red laser (ruby, emitting at 694.3 nm), with very short flashes (100 ns with self Q switched ruby laser). Ruby laser spots of about 1 cm diameter are delivered to on the area to be treated. As the black particles of the tattoo absorb more laser energy than the surrounding pale-pink skin (140 Mw/cm2, i.e. 14 j/cm2), we can obtain quite localized destruction and better healing. The beam is focussed on one point of the tattoo with a sighting neon-helium laser. In view of the very short impact, the energy absorbed by the pigmented particles diffuses minimally to adjacent tissues. After the crust falls, carrying away some tattoo pigment on its deeper surface, a pale-pink scar forms, then gradually fades in several months. With thick tattoos, it is necessary to proceed in layers and to plan a course of several treatments about one month apart. Compared with the other methods of tattoo removal (dermabrasion, salt, CO2 laser), ruby laser gives the best cosmetic results, even in keloid prone areas.

  15. Non-destructive testing; Examenes no destructivos

    Energy Technology Data Exchange (ETDEWEB)

    Calva, Mauricio; Loske, Achim [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1987-12-31

    The application of non-destructive testing (NDT) in several technical and industrial fields is pointed out, standing out its utilization in the detection of future failures without affecting the examined element. Likewise, the different types of NDTs and their processes, such as x-rays, ultrasoud, magnetic particles, induced currents, penetrating fluids, and optical means, are described. The Non-Destructive Tests Laboratory of the Instituto de Investigaciones Electricas (IIE), plans to create new and more reliable systems independent from the operator`s capacity, to contribute to fulfill the inspection and quality control needs of the generating Mexican power plants. [Espanol] Se senala la aplicacion de los examenes no destructivos (END) a diversos campos tecnicos e industriales, destacando su utilizacion en la deteccion de futuras fallas sin afectar el elemento examinado. Asimismo, se describen los diferentes tipos de END y sus procesos, tales como radiografia, ultrasonido, particulas magneticas, corrientes inducidas, liquidos penetrantes y metodos opticos. El Laboratorio de Pruebas no Destructivas, del Instituto de Investigaciones Electricas (IIE), planea crear sistemas novedosos mas confiables, que no dependan de la capacidad del operador, para contribuir a satisfacer las necesidades de inspeccion y control de calidad que se presentan en las plantas generadoras de energia mexicanas.

  16. Soft α-Open Sets and Soft α-Continuous Functions

    Directory of Open Access Journals (Sweden)

    Metin Akdag

    2014-01-01

    Full Text Available We introduce soft α-sets on soft topological spaces and study some of their properties. We also investigate the concepts of soft α-continuous and soft α-open functions and discuss their relationships with soft continuous and other weaker forms of soft continuous functions. Also counterexamples are given to show the noncoincidence of these functions.

  17. [The establishment of three-dimensional soft tissue facial reconstruction and morphometry].

    Science.gov (United States)

    Bai, Y; Guo, H; Liu, F

    2001-07-01

    To establish a digital three-dimensional facial soft tissue morphometry and reconstruction system for orthodontic diagnosis and analysis of the facial soft tissue. Three-dimensonal characteristics of facial soft tissue were captured by 4 digital cameras of high resolution. The developed hardware and software system and stereophotogrammetry were used for three-dimensional facial soft tissue reconstruction and morphometry at the same time. The three-dimensional facial soft tissue were successfully reconstructed with high reality and the three dimensional facial image can be rotated, moved and zoomed on the purpose. The system has the following advantages: (1) rapid capture of the facial image within 1 second or so, (2) accurate identification of facial landmark within 0.5 mm of resolution, (3) easy manipulation, (4) no exposure to radiation. The established system has proved to be effective for three-dimensional facial soft tissue diagnosis and analysis with the advantages of high resolution, high speed and, no exposure to radiation.

  18. Comparing culture and molecular methods for the identification of microorganisms involved in necrotizing soft tissue infections.

    Science.gov (United States)

    Rudkjøbing, Vibeke Børsholt; Thomsen, Trine Rolighed; Xu, Yijuan; Melton-Kreft, Rachael; Ahmed, Azad; Eickhardt, Steffen; Bjarnsholt, Thomas; Poulsen, Steen Seier; Nielsen, Per Halkjær; Earl, Joshua P; Ehrlich, Garth D; Moser, Claus

    2016-11-08

    Necrotizing soft tissue infections (NSTIs) are a group of infections affecting all soft tissues. NSTI involves necrosis of the afflicted tissue and is potentially life threatening due to major and rapid destruction of tissue, which often leads to septic shock and organ failure. The gold standard for identification of pathogens is culture; however molecular methods for identification of microorganisms may provide a more rapid result and may be able to identify additional microorganisms that are not detected by culture. In this study, tissue samples (n = 20) obtained after debridement of 10 patients with NSTI were analyzed by standard culture, fluorescence in situ hybridization (FISH) and multiple molecular methods. The molecular methods included analysis of microbial diversity by 1) direct 16S and D2LSU rRNA gene Microseq 2) construction of near full-length 16S rRNA gene clone libraries with subsequent Sanger sequencing for most samples, 3) the Ibis T5000 biosensor and 4) 454-based pyrosequencing. Furthermore, quantitative PCR (qPCR) was used to verify and determine the relative abundance of Streptococcus pyogenes in samples. For 70 % of the surgical samples it was possible to identify microorganisms by culture. Some samples did not result in growth (presumably due to administration of antimicrobial therapy prior to sampling). The molecular methods identified microorganisms in 90 % of the samples, and frequently detected additional microorganisms when compared to culture. Although the molecular methods generally gave concordant results, our results indicate that Microseq may misidentify or overlook microorganisms that can be detected by other molecular methods. Half of the patients were found to be infected with S. pyogenes, but several atypical findings were also made including infection by a) Acinetobacter baumannii, b) Streptococcus pneumoniae, and c) fungi, mycoplasma and Fusobacterium necrophorum. The study emphasizes that many pathogens can be involved

  19. Topology on Soft Continuous Function Spaces

    Directory of Open Access Journals (Sweden)

    Taha Yasin Öztürk

    2017-04-01

    Full Text Available The concept of soft sets was initiated by Molodtsov. Then, some operations on soft sets were defined by Maji et al. Later on, the concept of soft topological space was introduced. In this paper, we introduce the concept of the pointwise topology of soft topological spaces. Finally, we investigate the properties of soft mapping spaces and the relationships between some soft mapping spaces.

  20. Soft Decision Analyzer

    Science.gov (United States)

    Steele, Glen; Lansdowne, Chatwin; Zucha, Joan; Schlensinger, Adam

    2013-01-01

    The Soft Decision Analyzer (SDA) is an instrument that combines hardware, firmware, and software to perform realtime closed-loop end-to-end statistical analysis of single- or dual- channel serial digital RF communications systems operating in very low signal-to-noise conditions. As an innovation, the unique SDA capabilities allow it to perform analysis of situations where the receiving communication system slips bits due to low signal-to-noise conditions or experiences constellation rotations resulting in channel polarity in versions or channel assignment swaps. SDA s closed-loop detection allows it to instrument a live system and correlate observations with frame, codeword, and packet losses, as well as Quality of Service (QoS) and Quality of Experience (QoE) events. The SDA s abilities are not confined to performing analysis in low signal-to-noise conditions. Its analysis provides in-depth insight of a communication system s receiver performance in a variety of operating conditions. The SDA incorporates two techniques for identifying slips. The first is an examination of content of the received data stream s relation to the transmitted data content and the second is a direct examination of the receiver s recovered clock signals relative to a reference. Both techniques provide benefits in different ways and allow the communication engineer evaluating test results increased confidence and understanding of receiver performance. Direct examination of data contents is performed by two different data techniques, power correlation or a modified Massey correlation, and can be applied to soft decision data widths 1 to 12 bits wide over a correlation depth ranging from 16 to 512 samples. The SDA detects receiver bit slips within a 4 bits window and can handle systems with up to four quadrants (QPSK, SQPSK, and BPSK systems). The SDA continuously monitors correlation results to characterize slips and quadrant change and is capable of performing analysis even when the

  1. Experimental soft-matter science

    Science.gov (United States)

    Nagel, Sidney R.

    2017-04-01

    Soft materials consist of basic units that are significantly larger than an atom but much smaller than the overall dimensions of the sample. The label "soft condensed matter" emphasizes that the large basic building blocks of these materials produce low elastic moduli that govern a material's ability to withstand deformations. Aside from softness, there are many other properties that are also caused by the large size of the constituent building blocks. Soft matter is dissipative, disordered, far from equilibrium, nonlinear, thermal and entropic, slow, observable, gravity affected, patterned, nonlocal, interfacially elastic, memory forming, and active. This is only a partial list of how matter created from large component particles is distinct from "hard matter" composed of constituents at an atomic scale. Issues inherent in soft matter raise problems that are broadly important in diverse areas of science and require multiple modes of attack. For example, far-from-equilibrium behavior is confronted in biology, chemistry, geophysics, astrophysics, and nuclear physics. Similarly, issues dealing with disorder appear broadly throughout many branches of inquiry wherever rugged landscapes are invoked. This article reviews the discussions that occurred during a workshop held on 30-31 January 2016 in which opportunities in soft-matter experiment were surveyed. Soft matter has had an exciting history of discovery and continues to be a fertile ground for future research.

  2. Growing and evolving soft robots.

    Science.gov (United States)

    Rieffel, John; Knox, Davis; Smith, Schuyler; Trimmer, Barry

    2014-01-01

    Completely soft and flexible robots offer to revolutionize fields ranging from search and rescue to endoscopic surgery. One of the outstanding challenges in this burgeoning field is the chicken-and-egg problem of body-brain design: Development of locomotion requires the preexistence of a locomotion-capable body, and development of a location-capable body requires the preexistence of a locomotive gait. This problem is compounded by the high degree of coupling between the material properties of a soft body (such as stiffness or damping coefficients) and the effectiveness of a gait. This article synthesizes four years of research into soft robotics, in particular describing three approaches to the co-discovery of soft robot morphology and control. In the first, muscle placement and firing patterns are coevolved for a fixed body shape with fixed material properties. In the second, the material properties of a simulated soft body coevolve alongside locomotive gaits, with body shape and muscle placement fixed. In the third, a developmental encoding is used to scalably grow elaborate soft body shapes from a small seed structure. Considerations of the simulation time and the challenges of physically implementing soft robots in the real world are discussed.

  3. Soft Hair on Black Holes.

    Science.gov (United States)

    Hawking, Stephen W; Perry, Malcolm J; Strominger, Andrew

    2016-06-10

    It has recently been shown that Bondi-van der Burg-Metzner-Sachs supertranslation symmetries imply an infinite number of conservation laws for all gravitational theories in asymptotically Minkowskian spacetimes. These laws require black holes to carry a large amount of soft (i.e., zero-energy) supertranslation hair. The presence of a Maxwell field similarly implies soft electric hair. This Letter gives an explicit description of soft hair in terms of soft gravitons or photons on the black hole horizon, and shows that complete information about their quantum state is stored on a holographic plate at the future boundary of the horizon. Charge conservation is used to give an infinite number of exact relations between the evaporation products of black holes which have different soft hair but are otherwise identical. It is further argued that soft hair which is spatially localized to much less than a Planck length cannot be excited in a physically realizable process, giving an effective number of soft degrees of freedom proportional to the horizon area in Planck units.

  4. Soft Neutrosophic Loops and Their Generalization

    Directory of Open Access Journals (Sweden)

    Mumtaz Ali

    2014-06-01

    Full Text Available Soft set theory is a general mathematical tool for dealing with uncertain, fuzzy, not clearly defined objects. In this paper we introduced soft neutrosophic loop,soft neutosophic biloop, soft neutrosophic N -loop with the discuission of some of their characteristics. We also introduced a new type of soft neutrophic loop, the so called soft strong neutrosophic loop which is of pure neutrosophic character. This notion also found in all the other corresponding notions of soft neutrosophic thoery. We also given some of their properties of this newly born soft structure related to the strong part of neutrosophic theory.

  5. Bipolar-value fuzzy soft lie subalgebras

    Science.gov (United States)

    Zhang, Xiong-wei

    2017-09-01

    In this paper, the notions of bipolar-value fuzzy soft Lie subalgebras are given, some of their properties are studied. Furthermore, we shall define the definition of bipolar-value fuzzy soft homomorphism of bipolar-value fuzzy soft Lie subalgebras and show that the theorem of bipolar-value fuzzy soft homomorphic pre-image of bipolar-value fuzzy soft Lie subalgebra, we shall give a counterexample which the image of a bipolar-value fuzzy soft Lie subalgebra under bipolar-value fuzzy soft homomorphism needs not be bipolar-value fuzzy soft Lie subalgebra.

  6. The killing efficiency of soft iron shot

    Science.gov (United States)

    Andrews, R.; Longcore, J.R.

    1969-01-01

    A cooperative research effort between the ammunition industry and the Bureau of Sport Fisheries and Wildlife is aimed at finding a suitable non-toxic substitute for lead shot. A contract study by an independent research organization evaluated ways of coating or detoxifying lead shot or replacing it with another metal. As a result of that study, the only promising candidate is soft iron. Previous tests of hard iron shot had suggested that its killing effectiveness was poor at longer ranges due to the lower density. In addition, its hardness caused excessive damage to shotgun barrels. A unique, automated shooting facility was constructed at the Patuxent Wildlife Research Center to test the killing effectiveness of soft iron shot under controlled conditions. Tethered game-farm mallards were transported across a shooting point in a manner simulating free flight. A microswitch triggered a mounted shotgun so that each shot was 'perfect.' A soft iron shot, in Number 4 size, was produced by the ammunition industry and loaded in 12-gauge shells to give optimum ballistic performance. Commercial loads of lead shot in both Number 4 and Number 6 size were used for comparison. A total of 2,010 ducks were shot at ranges of 30 to 65 yards and at broadside and head-on angles in a statistically designed procedure. The following data were recorded for each duck: time until death, broken wing or leg bones, and number of embedded shot. Those ducks not killed outright were held for 10 days. From these data, ducks were categorized as 'probably bagged,' 'probably lost cripples,' or survivors. The test revealed that the killing effectiveness of this soft iron shot was superior to its anticipated performance and close to that obtained with commercial lead loads containing an equal number of pellets. Bagging a duck, in terms of rapid death or broken wing, was primarily dependent on the probability of a shot striking that vital area, and therefore a function of range. There was no indication

  7. Hard evidence on soft skills.

    Science.gov (United States)

    Heckman, James J; Kautz, Tim

    2012-08-01

    This paper summarizes recent evidence on what achievement tests measure; how achievement tests relate to other measures of "cognitive ability" like IQ and grades; the important skills that achievement tests miss or mismeasure, and how much these skills matter in life. Achievement tests miss, or perhaps more accurately, do not adequately capture, soft skills-personality traits, goals, motivations, and preferences that are valued in the labor market, in school, and in many other domains. The larger message of this paper is that soft skills predict success in life, that they causally produce that success, and that programs that enhance soft skills have an important place in an effective portfolio of public policies.

  8. The Creation and Destruction of Social Capital

    DEFF Research Database (Denmark)

    Svendsen, Gunnar Lind Haase; Svendsen, Gert Tinggaard

    are urging all social scientists to think more as social scientists rather than just as anthropologists, economists, historians, political scientists, or sociologists. Their effort to broaden the way social scientists think about social organization is an important step, especially for those of us interested...... in public policies. . . This is the type of book that should be assigned to graduate students across the social sciences as an illustration of the kind of work that they should aspire to do. I know I have learned a great deal from reading this book and appreciate the effort that the Svendsens have put......‘A welcome contribution to scholarly economic and public policy debates, The Creation and Destruction of Social Capital is written for advanced students yet offers insights critical to better understanding micro and macro economics alike.' - Willis M. Buhle, The Midwest Book Review ‘The Svendsens...

  9. Characterizing destructive quantum interference in electron transport

    Science.gov (United States)

    Sam-ang, Panu; Reuter, Matthew G.

    2017-05-01

    Destructive quantum interference in electron transport through molecules provides an unconventional route for suppressing electric current. In this work we introduce ‘interference vectors’ for each interference and use them to characterize the interference. An interference vector may be a combination of multiple molecular orbitals (MOs), leading to more robust interference that is likelier to be experimentally observable. In contrast, an interference vector may itself be a MO, in which case the interference is not robust and will be harder to detect. Our characterization scheme quantifies these two possibilities through the degree of rotation and also assigns an order to each interference that describes the shape of the Landauer-Büttiker transmission function around the interference. Several examples are then presented, showcasing the generality of our theory and characterization scheme, which is not limited to specific classes of molecules or particular molecule-electrode coupling patterns.

  10. Threat credibility and weapons of mass destruction.

    Science.gov (United States)

    Moores, Leon E

    2002-03-15

    Individual or collective preparedness for an attack involving weapons of mass destruction (WMD) must be based on an analysis of the threat. In threat assessment one takes many factors into account, including the physical and psychological parameters of the attacker. Although the potential devastation caused by WMD is significant, there are many limitations to the effective use of such weapons. Casualty rates will likely be measured in the thousands rather than millions because of factors that will be discussed. The psychological ramifications, it should be noted, the permutations of which have not yet been defined, will be much longer lasting. In this paper the author discusses these and other characteristics of the current threat.

  11. Risk Assessment for Destructive Re-Entry

    Science.gov (United States)

    Lips, T.; Koppenwallner, G.; Bianchi, L.; Klinkrad, H.

    2009-03-01

    From 2007 to 2008, Hypersonic Technology Göttingen (HTG) worked on a study called Risk Assessment for Destructive Re-entry (RADR). The main purposes of this study were to identify and to quantify the inherent uncertainties of re-entry analysis tools, and to provide possible risk mitigation measures. For these purposes, three basic risk scenarios were specified: a 1-ton-class satellite without propulsion for uncontrolled re-entry, a 6-ton-class satellite with propulsion and the capability to perform a controlled re-entry, and a 1-ton-class launcher upper stage re-entering uncontrolled. Based on the identified uncertainty parameters, variation analyses were conducted for these scenarios with the two ESA tools for re-entry analysis SCARAB (Spacecraft Atmospheric Reentry and Aerothermal Breakup) and SESAM (Spacecraft Entry Survival Analysis Module). This paper describes the major results of the RADR study.

  12. Destructive Single-Event Failures in Diodes

    Science.gov (United States)

    Casey, Megan C.; Gigliuto, Robert A.; Lauenstein, Jean-Marie; Wilcox, Edward P.; Kim, Hak; Chen, Dakai; Phan, Anthony M.; LaBel, Kenneth A.

    2013-01-01

    In this summary, we have shown that diodes are susceptible to destructive single-event effects, and that these failures occur along the guard ring. By determining the last passing voltages, a safe operating area can be derived. By derating off of those values, rather than by the rated voltage, like what is currently done with power MOSFETs, we can work to ensure the safety of future missions. However, there are still open questions about these failures. Are they limited to a single manufacturer, a small number, or all of them? Is there a threshold rated voltage that must be exceeded to see these failures? With future work, we hope to answer these questions. In the full paper, laser results will also be presented to verify that failures only occur along the guard ring.

  13. Non-destructive evaluation of composites

    Science.gov (United States)

    Chu, Tsuchin Philip

    1996-01-01

    The composite materials have been used in aerospace industries for quite some time. Several non-destructive evaluation (NDE) methods have been developed to inspect composites in order to detect flaws, matrix cracking, and delamination. These methods include ultrasonics, acoustic emission, shearography, thermography, X-ray, and digital image correlation. The NDE Branch of Marshall Space Flight Center has recently acquired a thermal imaging NDE system. The same system has been used at NASA Langley Research Center for detecting disbonds. In order to compare different NDE methods, three carbon/carbon composite panels were used for experiment using ultrasonic C-scan, shearography, and thermography methods. These panels have teflon inserts to simulate the delamination between plies in a composite panel. All three methods have successfully located the insert. The experiment and results are presented in the following sections.

  14. Galaxy simulation with dust formation and destruction

    Science.gov (United States)

    Aoyama, Shohei; Hou, Kuan-Chou; Shimizu, Ikkoh; Hirashita, Hiroyuki; Todoroki, Keita; Choi, Jun-Hwan; Nagamine, Kentaro

    2017-04-01

    We perform smoothed particle hydrodynamics (SPH) simulations of an isolated galaxy with a new treatment for dust formation and destruction. To this aim, we treat dust and metal production self-consistently with star formation and supernova (SN) feedback. For dust, we consider a simplified model of grain size distribution by representing the entire range of grain sizes with large and small grains. We include dust production in stellar ejecta, dust destruction by SN shocks, grain growth by accretion and coagulation and grain disruption by shattering. We find that the assumption of fixed dust-to-metal mass ratio becomes no longer valid when the galaxy is older than 0.2 Gyr, at which point the grain growth by accretion starts to contribute to the non-linear rise of dust-to-gas ratio. As expected in our previous one-zone model, shattering triggers grain growth by accretion since it increases the total surface area of grains. Coagulation becomes significant when the galaxy age is greater than ˜ 1 Gyr; at this epoch, the abundance of small grains becomes high enough to raise the coagulation rate of small grains. We further compare the radial profiles of dust-to-gas ratio (D) and dust-to-metal ratio (D/Z, I.e. depletion) at various ages with observational data. We find that our simulations broadly reproduce the radial gradients of dust-to-gas ratio and depletion. In the early epoch (≲ 0.3 Gyr), the radial gradient of D follows the metallicity gradient with D/Z determined by the dust condensation efficiency in stellar ejecta, while the D gradient is steeper than the Z gradient at the later epochs because of grain growth by accretion. The framework developed in this paper is applicable to any SPH-based galaxy evolution simulations including cosmological ones.

  15. The Destruction of Books by Traditionists

    Directory of Open Access Journals (Sweden)

    Melchert, Christopher

    2014-06-01

    Full Text Available This paper is a survey of the destruction of books particularly by traditionists (collectors, transmitters, and critics of hadith and particularly in the ninth century CE and before, offered as an addendum to Omar Ali de Unzaga’s forthcoming study of book burning in Islam. The destruction of books from distrust of written transmission has been adequately brought out by Michael Cook. What I chiefly add to previous scholarly accounts are some additional examples, a brief consideration of destroying books for the sake of orthodoxy, and a better account of pious reasons for destroying books, which had much to do with distrust not of writing hadith but of teaching it as a temptation to pride and a distraction from weightier things.Este artículo ofrece una panorámica de la destrucción de libros especialmente por parte de los tradicionistas (compiladores, transmisores, críticos del hadiz, especialmente en el siglo IX de la era cristiana y antes, que sirve como una adenda al estudio (en curso de publicación de Omar Ali de Unzaga sobre la quema de libros en el islam. La destrucción de libros a causa de la desconfianza hacia la transmisión escrita ha sido analizada en profundidad por Michael Cook. Lo que me interesa añadir a la investigación previa son algunos ejemplos adicionales, unas breves consideraciones sobre la destrucción de libros en pro de la ortodoxia, y una mejor presentación de las razones piadosas para destruir libros, razones que tenían mucho que ver con la desconfianza no tanto de poner escrito el hadiz, sino de enseñarlo, en tanto que tentación para caer en la vanidad y distracción de asuntos más importantes.

  16. KINETICS OF DESTRUCTION OF NANOMODIFIED SULFIR COMPOSITES

    Directory of Open Access Journals (Sweden)

    KOROLEV Evgenij Valerjevich

    2013-12-01

    Full Text Available As the service load on structures is constantly growing, modern construction industry needs new materials which could provide more capabilities and meet special requirements for operational performance. One of such materials is the so-called sulfur composite. When producing this composite the sulfur is used as a binder and different powders, fibers and grains can be used as the disperse phases. There are many advantages of sulfur composites: cheap binder, quick structure forming, high chemical resistance etc. For some operational conditions, however, the sulfur composites show the lack of required compressive strength. But recently developed method – nanomodification – addresses mentioned drawback of sulfur composites. Nanomodification is the formation of intermediate nanoscale layer on fine filler by means of addition of selected precursor. Moreover, taking into account the necessity to characterize the material not only by one scalar parameter – the compressive strength – but also by kinetics of fracture, we candecide that experimental methods of fracture mechanics should be used during examination of sulfur composite. One of the most promising is the acoustic emission (AE method, which is often designated as a method of non-destructive testing. Nevertheless, acoustic emission occurs – and can be measured – during the process of destructive testing too. The successful application of the acoustic emission method for studying kinetics of fracture imposes some requirements to testing machine characteristics; thus, all measurements were carried out with the device that had been developed for this purpose. It was shown that nanomodified sulfur composites demonstrate the reduction of AE energy to the final stage of load. Because of this, we propose to describe the fracture kinetics by «median stress» – stress corresponding to the half-release of all AE energy during fracture. It was shown that offered scalar parameter is in strong

  17. Contrast-Enhanced CT using a Cationic Contrast Agent Enables Non-Destructive Assessment of the Biochemical and Biomechanical Properties of Mouse Tibial Plateau Cartilage

    OpenAIRE

    Lakin, Benjamin A.; Patel, Harsh; Holland, Conor; Freedman, Jonathan D.; Shelofsky, Joshua S.; Snyder, Brian D.; Stok, Kathryn S.; Grinstaff, Mark W.

    2016-01-01

    Mouse models of osteoarthritis (OA) are commonly used to study the disease’s pathogenesis and efficacy of potential treatments. However, measuring the biochemical and mechanical properties of articular cartilage in these models currently requires destructive and time-consuming histology and mechanical testing. Therefore, we examined the feasibility of using contrast-enhanced CT (CECT) to rapidly and non-destructively image and assess the glycosaminoglycan (GAG) content. Using three ex vivo C5...

  18. Engineering applications of soft computing

    CERN Document Server

    Díaz-Cortés, Margarita-Arimatea; Rojas, Raúl

    2017-01-01

    This book bridges the gap between Soft Computing techniques and their applications to complex engineering problems. In each chapter we endeavor to explain the basic ideas behind the proposed applications in an accessible format for readers who may not possess a background in some of the fields. Therefore, engineers or practitioners who are not familiar with Soft Computing methods will appreciate that the techniques discussed go beyond simple theoretical tools, since they have been adapted to solve significant problems that commonly arise in such areas. At the same time, the book will show members of the Soft Computing community how engineering problems are now being solved and handled with the help of intelligent approaches. Highlighting new applications and implementations of Soft Computing approaches in various engineering contexts, the book is divided into 12 chapters. Further, it has been structured so that each chapter can be read independently of the others.

  19. Destruction of Interstellar Dust in Evolving Supernova Remnant Shock Waves

    Science.gov (United States)

    Slavin, Jonathan D.; Dwek, Eli; Jones, Anthony P.

    2015-01-01

    Supernova generated shock waves are responsible for most of the destruction of dust grains in the interstellar medium (ISM). Calculations of the dust destruction timescale have so far been carried out using plane parallel steady shocks, however that approximation breaks down when the destruction timescale becomes longer than that for the evolution of the supernova remnant (SNR) shock. In this paper we present new calculations of grain destruction in evolving, radiative SNRs. To facilitate comparison with the previous study by Jones et al. (1996), we adopt the same dust properties as in that paper. We find that the efficiencies of grain destruction are most divergent from those for a steady shock when the thermal history of a shocked gas parcel in the SNR differs significantly from that behind a steady shock. This occurs in shocks with velocities 200 km s(exp -1) for which the remnant is just beginning to go radiative. Assuming SNRs evolve in a warm phase dominated ISM, we find dust destruction timescales are increased by a factor of approximately 2 compared to those of Jones et al. (1996), who assumed a hot gas dominated ISM. Recent estimates of supernova rates and ISM mass lead to another factor of approximately 3 increase in the destruction timescales, resulting in a silicate grain destruction timescale of approximately 2-3 Gyr. These increases, while not able resolve the problem of the discrepant timescales for silicate grain destruction and creation, are an important step towards understanding the origin, and evolution of dust in the ISM.

  20. [Soft tissue rheumatism in erderly].

    Science.gov (United States)

    Szczepański, Leszek

    2008-01-01

    Disorders of soft, peri-articular tissues are a common cause of musculoskeletal pain in elderly patients. Nevertheless, most physicians underestimate the role of soft tissue rheumatism in the pathomechanism of the pain. The impairments of soft tissue can not be diagnosed by X-rays examinations, whereas degenerative lesions of joints are easy diagnosed using this method even despite of their uncertain role in producing the symptoms. The incidence of pain syndromes originated from soft tissues differ regarding to the age of patients. In young subjects the incidence of all of them is generally low. Syndromes provoked by overloading during work: repetitive strain syndrome, canal tunnel syndrome, tennis elbow, golfers elbow, shoulder tendon coin disorders and myofascial pain syndrome are common in middle-aged patients. The morbidity of fibromialgia syndrome is also lower in old people probably as the result of diminished numbers and degenerative changes in nociceptive fibers. The syndromes prevailing in elderly patients include trochanteric syndrome and the pain syndromes provoked by muscle spasm depended on posture abnormalities. In the soft tissue pain syndrome prevention adapted to old age kinesitherapy and avoiding muscle overloading are recommended. Soft tissue pain syndromes are usually treated with non steroidal anti inflammatory drugs. In local pain syndromes better results can be obtained by local treatment. Local injections of glikocorticosteroids are usually very effective and safe.

  1. Rapid Prototyping

    Science.gov (United States)

    1999-01-01

    Javelin, a Lone Peak Engineering Inc. Company has introduced the SteamRoller(TM) System as a commercial product. The system was designed by Javelin during a Phase II NASA funded small commercial product. The purpose of the invention was to allow automated-feed of flexible ceramic tapes to the Laminated Object Manufacturing rapid prototyping equipment. The ceramic material that Javelin was working with during the Phase II project is silicon nitride. This engineered ceramic material is of interest for space-based component.

  2. Soft Mobility and Urban Transformation

    Directory of Open Access Journals (Sweden)

    Rosa Anna La Rocca

    2010-04-01

    Full Text Available This paper examines some European cases referred to promotion of soft mobility as a new lifestyle aimed to improve benefits on environment and urban liveability. Soft mobility includes any non-motorized transport (human powered mobility. According to this, soft mobility refers to pedestrian, bicycle, roller skate and skateboard transfers. It could be indented as “zeroimpact” mobility too. As a matter of fact, the words to define this way of moving have not been codified yet, therefore mobilitè douce, soft mobility, slow traffic are synonymous in referring mainly to pedestrians and cyclists to indicate alternative to car use. Soft mobility, indeed, can be defined as a special form of sustainable mobility able to optimize urban liveability, by keeping the individual right to move. At present, cities are engaged in defining policies, procedures and interventions to further “slow traffic”, both to relieve the traffic congestion, and to work for regeneration and environmental improvements. This asks for an in-depth cooperation between different political and administrative levels to achieve common objectives of development more attentive to environmental concerns. Despite this increasing attention, the idea of a “network” for soft mobility has not been yet achieved and the supply of integrated facilities and services as an alternative to the car use seems to be still difficult of accomplishment. High disparity characterizes European countries in promoting soft mobility: despite a prolific production of laws and roles referred to emergency of adopting alternative ways of moving to minimize negatives impacts (especially air and noise pollution as very threat to health due to car dependence for urban short distance too. And yet, soft mobility could represent a real occasion of urban and territorial regeneration aimed to rehabilitate some disused paths and routes (greenways. Some successful European cases show how it is possible to

  3. NON-DESTRUCTIVE SOIL CARBON ANALYZER.

    Energy Technology Data Exchange (ETDEWEB)

    Wielopolski, Lucian; Hendrey, G.; Orion, I.; Prior, S.; Rogers, H.; Runion, B.; Torbert, A.

    2004-02-01

    This report describes the feasibility, calibration, and safety considerations of a non-destructive, in situ, quantitative, volumetric soil carbon analytical method based on inelastic neutron scattering (INS). The method can quantify values as low as 0.018 gC/cc, or about 1.2% carbon by weight with high precision under the instrument's configuration and operating conditions reported here. INS is safe and easy to use, residual soil activation declines to background values in under an hour, and no radiological requirements are needed for transporting the instrument. The labor required to obtain soil-carbon data is about 10-fold less than with other methods, and the instrument offers a nearly instantaneous rate of output of carbon-content values. Furthermore, it has the potential to quantify other elements, particularly nitrogen. New instrumentation was developed in response to a research solicitation from the U.S. Department of Energy (DOE LAB 00-09 Carbon Sequestration Research Program) supporting the Terrestrial Carbon Processes (TCP) program of the Office of Science, Biological and Environmental Research (BER). The solicitation called for developing and demonstrating novel techniques for quantitatively measuring changes in soil carbon. The report includes raw data and analyses of a set of proof-of-concept, double-blind studies to evaluate the INS approach in the first phase of developing the instrument. Managing soils so that they sequester massive amounts of carbon was suggested as a means to mitigate the atmospheric buildup of anthropogenic CO{sub 2}. Quantifying changes in the soils' carbon stocks will be essential to evaluating such schemes and documenting their performance. Current methods for quantifying carbon in soil by excavation and core sampling are invasive, slow, labor-intensive and locally destroy the system being observed. Newly emerging technologies, such as Laser Induced Breakdown Spectroscopy and Near-Infrared Spectroscopy, offer soil

  4. Generalised Interval-Valued Fuzzy Soft Set

    Directory of Open Access Journals (Sweden)

    Shawkat Alkhazaleh

    2012-01-01

    Full Text Available We introduce the concept of generalised interval-valued fuzzy soft set and its operations and study some of their properties. We give applications of this theory in solving a decision making problem. We also introduce a similarity measure of two generalised interval-valued fuzzy soft sets and discuss its application in a medical diagnosis problem: fuzzy set; soft set; fuzzy soft set; generalised fuzzy soft set; generalised interval-valued fuzzy soft set; interval-valued fuzzy set; interval-valued fuzzy soft set.

  5. Some Properties of Intuitionistic Fuzzy Soft Rings

    Directory of Open Access Journals (Sweden)

    B. A. Ersoy

    2013-01-01

    Full Text Available Maji et al. introduced the concept of intuitionistic fuzzy soft sets, which is an extension of soft sets and intuitionistic fuzzy sets. In this paper, we apply the concept of intuitionistic fuzzy soft sets to rings. The concept of intuitionistic fuzzy soft rings is introduced and some basic properties of intuitionistic fuzzy soft rings are given. Intersection, union, AND, and OR operations of intuitionistic fuzzy soft rings are defined. Then, the deffinitions of intuitionistic fuzzy soft ideals are proposed and some related results are considered.

  6. Bipolar soft connected, bipolar soft disconnected and bipolar soft compact spaces

    OpenAIRE

    Muhammad Shabir; Ayreena Bakhtawar

    2017-01-01

    Bipolar soft topological spaces are mathematical expressions to estimate interpretation of data frameworks. Bipolar soft theory considers the core features of data granules. Bipolarity is important to distinguish between positive information which is guaranteed to be possible and negative information which is forbidden or surely false. Connectedness and compactness are the most important fundamental topological properties. These properties highlight the main features of topological s...

  7. [Clinical and clinico-histological markers in chronic destructive adult periodontitis].

    Science.gov (United States)

    Hernández Vallejo, G; García Rodríguez, M D; Tejerina Lobo, J M; López Sánchez, A F; De la Roca, C

    1989-05-01

    This study was designed to evaluate the significance and interrelationship of clinical parameters and their association with histologic changes in advanced destructive periodontitis. 158 patients with PDI greater than 4 (Ramfjord) were selected, evaluating the size, contouring, bleeding, consistency, colour and gingival pain. Epithelial ulceration of soft periodontal pockets were also evaluated. The results showed a statistically significant association between purplish colour and gingival fibrosis and advanced stage of the disease. Gingival bleeding on probing was the most important clinical parameter in advanced phases of the disease, either alone or in association with other parameters such as the presence of epithelial ulcerations. The Periodontal Disease Index (Ramfjord) has proven effective in the evaluation of generalized patterns of disease.

  8. In situ non-destructive measurement of biofilm thickness and topology in an interferometric optical microscope.

    Science.gov (United States)

    Larimer, Curtis; Suter, Jonathan D; Bonheyo, George; Addleman, Raymond Shane

    2016-06-01

    Biofilms are ubiquitous and impact the environment, human health, dental hygiene, and a wide range of industrial processes. Biofilms are difficult to characterize when fully hydrated, especially in a non-destructive manner, because of their soft structure and water-like bulk properties. Herein a method of measuring and monitoring the thickness and topology of live biofilms of using white light interferometry is described. Using this technique, surface morphology, surface roughness, and biofilm thickness were measured over time without while the biofilm continued to grow. The thickness and surface topology of a P. putida biofilm were monitored growing from initial colonization to a mature biofilm. Measured thickness followed expected trends for bacterial growth. Surface roughness also increased over time and was a leading indicator of biofilm growth. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Slow creep in soft granular packings.

    Science.gov (United States)

    Srivastava, Ishan; Fisher, Timothy S

    2017-05-14

    Transient creep mechanisms in soft granular packings are studied numerically using a constant pressure and constant stress simulation method. Rapid compression followed by slow dilation is predicted on the basis of a logarithmic creep phenomenon. Characteristic scales of creep strain and time exhibit a power-law dependence on jamming pressure, and they diverge at the jamming point. Microscopic analysis indicates the existence of a correlation between rheology and nonaffine fluctuations. Localized regions of large strain appear during creep and grow in magnitude and size at short times. At long times, the spatial structure of highly correlated local deformation becomes time-invariant. Finally, a microscale connection between local rheology and local fluctuations is demonstrated in the form of a linear scaling between granular fluidity and nonaffine velocity.

  10. Neutrosophic Parameterized Soft Relations and Their Applications

    Directory of Open Access Journals (Sweden)

    Irfan Deli

    2014-06-01

    Full Text Available The aim of this paper is to introduce the concept of relation on neutrosophic parameterized soft set (NP- soft sets theory. We have studied some related properties and also put forward some propositions on neutrosophic parameterized soft relation with proofs and examples. Finally the notions of symmetric, transitive, reflexive, and equivalence neutrosophic parameterized soft set relations have been established in our work. Finally a decision making method on NP-soft sets is presented.

  11. Soft Manipulators and Grippers: A Review

    OpenAIRE

    Josie Hughes; Utku Culha; Fabio Giardina; Fabian Günther; Andre Rosendo; Fumiya Iida

    2016-01-01

    Soft robotics is a growing area of research which utilises the compliance and adaptability of soft structures to develop highly adaptive robotics for soft interactions. One area in which soft robotics has the ability to make significant impact is in the development of soft grippers and manipulators. With an increased requirement for automation, robotics systems are required to perform task in unstructured and not well defined environments; conditions which conventional rigid robotics are no...

  12. Soft Manipulators and Grippers: A Review

    OpenAIRE

    Hughes, Josie; Culha, Utku; Giardina, Fabio; Guenther, Fabian; Rosendo, Andre; Iida, Fumiya

    2016-01-01

    Soft robotics is a growing area of research which utilizes the compliance and adaptability of soft structures to develop highly adaptive robotics for soft interactions. One area in which soft robotics has the ability to make significant impact is in the development of soft grippers and manipulators. With an increased requirement for automation, robotics systems are required to perform task in unstructured and not well defined environments; conditions which conventional rigid robotics are not ...

  13. Detection of weapons of mass destruction

    Science.gov (United States)

    Bjorkholm, Paul J.

    2003-07-01

    High Energy X-ray cargo screening is a mature technology that has proven its value in the detection of contraband material hidden within cargo including fully loaded sea containers. To date high energy screening has been largely applied to manifest verification and to drug detection. However, the dramatic change in world terrorism has altered the application. Now it is essential that weapons of mass destruction (WMD"s) be interdicted with incredibly high accuracy. The implication of a missed detection has gone from loss of revenue or the lowering of the street price of drugs to potentially stopping, at least for some significant time, most world commerce. Screening containers with high energy x-rays (~250+ mm of steel penetration) is capable of detecting all nuclear threats at a fraction of the strategically important mass. The screening operation can be automated so that no human decisions are required with very low false alarms. Finally, the goal of 100% inspection of cargo inbound to the United States from the twenty largest international ports is an achievable goal with hardware costs in the area of that already spent on airport security.

  14. Modelling of fiberglass pipe destruction process

    Directory of Open Access Journals (Sweden)

    А. К. Николаев

    2017-03-01

    Full Text Available The article deals with important current issue of oil and gas industry of using tubes made of high-strength composite corrosion resistant materials. In order to improve operational safety of industrial pipes it is feasible to use composite fiberglass tubes. More than half of the accidents at oil and gas sites happen at oil gathering systems due to high corrosiveness of pumped fluid. To reduce number of accidents and improve environmental protection we need to solve the issue of industrial pipes durability. This problem could be solved by using composite materials from fiberglass, which have required physical and mechanical properties for oil pipes. The durability and strength can be monitored by a fiberglass winding method, number of layers in composite material and high corrosion-resistance properties of fiberglass. Usage of high-strength composite materials in oil production is economically feasible; fiberglass pipes production is cheaper than steel pipes. Fiberglass has small volume weight, which simplifies pipe transportation and installation. In order to identify the efficiency of using high-strength composite materials at oil production sites we conducted a research of their physical-mechanical properties and modelled fiber pipe destruction process.

  15. Non-destructive measurement of cultural property

    Energy Technology Data Exchange (ETDEWEB)

    Hirao, Yoshimitsu [Tokyo National Research Inst. of Cultural Properties, Tokyo (Japan). Dept. of Conservation Science

    1997-02-01

    Non-destructive analytical method is favored for the measurement of samples from the field of cultural properties. Among many scientific methods, X-ray fluorescence spectrometry and X-ray diffraction method are frequently applied in this field. X-ray fluorescence spectrometer is the main method for the measurement of chemical composition of cultural properties when sample is not taken out. It is the most important concept during the measurement, that samples should be kept in the safety condition without any difficulty or defect. Because a sample from the field of cultural properties could not be cut or could not be laid down in some cases, instruments should be improved to admit these samples and conditions. It is one of the solutions for this point to equip a large sample chamber in the instrument. Several new instruments with large sample chamber which was specially designed for the cultural properties were explained. Applications of these instruments were also explained for the real archaeological and historical samples. Even the measurements is not quantitative and qualitative analysis only, the results is evaluated to be valuable for the understanding of the samples. The micro focus X-ray fluorescence spectrometer was also applied in this field. The method gave not only the ordinary chemical composition but also the structure of the samples by mapping. (author)

  16. Developmentally programmed nuclear destruction during yeast gametogenesis.

    Science.gov (United States)

    Eastwood, Michael D; Cheung, Sally W T; Lee, Kwan Yin; Moffat, Jason; Meneghini, Marc D

    2012-07-17

    Autophagy controls cellular catabolism in diverse eukaryotes and modulates programmed cell death in plants and animals. While studies of the unicellular yeast Saccharomyces cerevisiae have provided fundamental insights into the mechanisms of autophagy, the roles of cell death pathways in yeast are less well understood. Here, we describe widespread developmentally programmed nuclear destruction (PND) events that occur during yeast gametogenesis. PND is executed through apoptotic-like DNA fragmentation in coordination with an unusual form of autophagy that is most similar to mammalian lysosomal membrane permeabilization and mega-autophagy, a form of plant autophagic cell death. Undomesticated strains execute gametogenic PND broadly in maturing colonies to the apparent benefit of sibling cells, confirming its prominence during the yeast life cycle. Our results reveal that diverse cell-death-related processes converge during gametogenesis in a microbe distantly related to plants or animals, highlighting gametogenesis as a process during which programmed cell death mechanisms may have evolved. Copyright © 2012 Elsevier Inc. All rights reserved.

  17. Power, Creativity, and Destruction in Turner's Fires

    Directory of Open Access Journals (Sweden)

    Leo Costello

    2017-12-01

    Full Text Available This article considers Turner’s depictions of fire throughout his career. Beginning with some of his very first images, including 'The Pantheon, the Morning after the Fire', it argues that while fire would eventually come to be a means for Turner to create his reputation as a painter of destruction, it also held associations of creativity, domesticity, and comfort. Furthermore, while fire was not nearly as prominent in his early work as it was in the early 1830s, it also became a means for him to elaborate issues of viewership, sublimity, and public space. Following a consideration of some of Turner’s most well-known images of fire in the 1830s, such as those in the 'Parliament' paintings, the article concludes with an extended discussion of the 1832 'Shadrach, Meshach and Abednego in the Burning Fiery Furnace'. It broadly connects the pictures of the early 1830s to the growth of mass politics and its implications.

  18. European Non Destructive Examination Forum (ENDEF)

    Energy Technology Data Exchange (ETDEWEB)

    Deffrennes, M. [EC, DG XVII, Nuclear Energy, Brussels (Belgium); Engl, G. [Siemens AG Energieerzeugung KWU, Erlangen (Germany); Estorff, U. von [EC, JRC/IAM, Petten (Netherlands)

    1998-11-01

    ENDEF, an initiative of the European Commission, DG XVII (Energy) was well supported by the European industrial institutions working in assistance with nuclear industrial organisations in the CEEC`s (Central and Eastern European Countries) and NIS`s (New Independent States). This Forum provides effectively a platform for open discussion between representatives of industrial actors active in the NDE (Non Destructive Examination)/ISI (In Service Inspection) field with the purpose to establish a co-operation pattern between qualified representatives of the EU (European Union) industry to offer a better co-ordinated and well defined assistance to the CEEC`s and NIS in the field of NDE/ISI, and to lay the ground for further industrial co-operation. ENDEF developed a strategy to follow for the establishment of co-operation projects. This strategy is now used to understand the extent of past or present assistance projects and to identify the areas where more co-operation is needed. ENDEF encourages the creation in the NIS`s and CEEC`s of similar forums in order to increase the co-operation and co-ordination. ENDEF is also working in perfect agreement with the European Network ENIQ, piloted by the European plant operators. This identity of views lead to the leadership by the ENDEF co-ordinator of the ENIQ Task 3 involving Applications of the European Methodology for ISI qualification in the CEEC`s and NIS`s and presently fully integrated in ENDEF. (orig.)

  19. Are Destructive Operations Still Relevant to Obstetric Practice in ...

    African Journals Online (AJOL)

    Context: From our clinical observation, we often see caesarean section being performed in situations where destructive operations would have been more appropriate. Objective: To determine the proportion of cases of obstructed labour that meet defined criteria for destructive vaginal operation vis-à-vis the proportion that ...

  20. 50 CFR 28.43 - Destruction of dogs and cats.

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Destruction of dogs and cats. 28.43 Section 28.43 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR... VIOLATIONS OF PARTS 25, 26, AND 27 Impoundment Procedures § 28.43 Destruction of dogs and cats. Dogs and cats...

  1. 9 CFR 54.7 - Procedures for destruction of animals.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Procedures for destruction of animals. 54.7 Section 54.7 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT... SCRAPIE Scrapie Indemnification Program § 54.7 Procedures for destruction of animals. (a) Scrapie-positive...

  2. 9 CFR 2.129 - Confiscation and destruction of animals.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Confiscation and destruction of animals. 2.129 Section 2.129 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.129 Confiscation and destruction of...

  3. Unilateral post-tuberculosis lung destruction and massive ...

    African Journals Online (AJOL)

    Abiodun S. Adeniran

    2015-04-29

    Apr 29, 2015 ... Ashour M, Pandya L, Mezraqji A, et al. Unilateral post-tubercu- · lous lung destruction: the left bronchus syndrome. Thorax · 1990;45:210–2. 2. Fawibe AE, Salami AK, Oluboyo PO, Desalu OO, Odeigha LO. Profile and outcome of unilateral tuberculous lung destruction in · Ilorin, Nigeria. West Afr J Med 2011 ...

  4. Willingness to pay for defense against weapons of mass destruction.

    Science.gov (United States)

    Mulvaney, J M; LaBarre, D; Pastel, R; Landauer, M

    2001-12-01

    A survey assessed the willingness to pay for defense against weapons of mass destruction. The results were evaluated according to the benefit to society. The results indicated preferences for increased spending on intelligence gathering, training, and equipment. We concluded that the United States is spending less for weapons of mass destruction defense than the sample population was willing to pay.

  5. 27 CFR 25.221 - Voluntary destruction of beer.

    Science.gov (United States)

    2010-04-01

    ... beer. 25.221 Section 25.221 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Voluntary Destruction § 25.221 Voluntary destruction of beer. (a) On brewery premises. (1) A brewer may destroy, at the brewery, beer on which the tax has not...

  6. 15 CFR 721.3 - Destruction or disposal of records.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Destruction or disposal of records... INSPECTION OF RECORDS AND RECORDKEEPING § 721.3 Destruction or disposal of records. If BIS or other authorized U.S. government agency makes a formal or informal request for a certain record or records, such...

  7. 15 CFR 786.3 - Destruction or disposal of records.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Destruction or disposal of records... (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE ADDITIONAL PROTOCOL REGULATIONS RECORDS AND RECORDKEEPING § 786.3 Destruction or disposal of records. If BIS or any other authorized U.S...

  8. Destructive Leadership: The Hatfield and McCoy Feud

    Science.gov (United States)

    Sparks, George; Wolf, Patricia; Zurick, Andryce M.

    2015-01-01

    This paper explores the phenomenon of destructive leadership using the historical case study of the feud between the Hatfields and McCoys. The characteristics of destructive leadership as well as the consequences of this leadership style are reviewed, examined and analyzed. Utilizing a case from history to shine light on a contemporary problem,…

  9. 19 CFR 191.44 - Destruction under Customs supervision.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Destruction under Customs supervision. 191.44 Section 191.44 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) DRAWBACK Rejected Merchandise § 191.44 Destruction under Customs...

  10. 19 CFR 191.25 - Destruction under Customs supervision.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Destruction under Customs supervision. 191.25 Section 191.25 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY; DEPARTMENT OF THE TREASURY (CONTINUED) DRAWBACK Manufacturing Drawback § 191.25 Destruction under Customs...

  11. 27 CFR 24.294 - Destruction of wine.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Destruction of wine. 24..., DEPARTMENT OF THE TREASURY LIQUORS WINE Removal, Return and Receipt of Wine Removals Without Payment of Tax § 24.294 Destruction of wine. (a) General. Wine on bonded wine premises may be destroyed on or off wine...

  12. Soft-leadership competencies for today's healthcare finance executives.

    Science.gov (United States)

    Madden, Mark

    2015-05-01

    With the healthcare industry changing rapidly, organizations seek finance leaders who have skills that go beyond traditional expertise in revenue and expenses. These additional competencies fall under the heading of soft-leadership skills and include the ability to be strategy-oriented, agile, passionate, inspirational, influential, communicative, dependable, driven, integrative, and engaged. Networking, participation in a mentoring program, and continuing education provide avenues for finance leaders to develop these sorts of skills.

  13. Destruction and Sequestration of H2O on Mars

    Science.gov (United States)

    Clark, Benton

    2016-07-01

    The availability of water in biologically useable form on any planet is a quintessential resource, even if the planet is in a zone habitable with temperature regimes required for growth of organisms (above -18 °C). Mars and most other planetary objects in the solar system do not have sufficient liquid water at their surfaces that photosynthesis or chemolithoautotrophic metabolism could occur. Given clear evidence of hydrous mineral alteration and geomorphological constructs requiring abundant supplies of liquid water in the past, the question arises whether this H2O only became trapped physically as ice, or whether there could be other, more or less accessible reservoirs that it has evolved into. Salts containing S or Cl appear to be ubiquitous on Mars, having been measured in soils by all six Mars landed missions, and detected in additional areas by orbital investigations. Volcanoes emit gaseous H2S, S, SO2, HCl and Cl2. A variety of evidence indicates the geochemical fate of these gases is to be transformed into sulfates, chlorides, chlorates and perchlorates. Depending on the gas, the net reaction causes the destruction of between one and up to eight molecules of H2O per atom of S or Cl (although hydrogen atoms are also released, they are lost relatively rapidly to atmospheric escape). Furthermore, the salt minerals formed often incorporate H2O into their crystalline structures, and can result in the sequestration of up to yet another six (sometimes, more) molecules of H2O. In addition, if the salts are microcrystalline or amorphous, they are potent adsorbents for H2O. In certain cases, they are even deliquescent under martian conditions. Finally, the high solubility of the vast majority of these salts (with notable exception of CaSO4) can result in dense brines with low water activity, aH, as well as cations which can be inimical to microbial metabolism, effectively "poisoning the well." The original geologic materials on Mars, igneous rocks, also provide some

  14. Trabectedin in Soft Tissue Sarcomas

    Directory of Open Access Journals (Sweden)

    Bradley J. Petek

    2015-02-01

    Full Text Available Soft tissue sarcomas are a group of rare tumors derived from mesenchymal tissue, accounting for about 1% of adult cancers. There are over 60 different histological subtypes, each with their own unique biological behavior and response to systemic therapy. The outcome for patients with metastatic soft tissue sarcoma is poor with few available systemic treatment options. For decades, the mainstay of management has consisted of doxorubicin with or without ifosfamide. Trabectedin is a synthetic agent derived from the Caribbean tunicate, Ecteinascidia turbinata. This drug has a number of potential mechanisms of action, including binding the DNA minor groove, interfering with DNA repair pathways and the cell cycle, as well as interacting with transcription factors. Several phase II trials have shown that trabectedin has activity in anthracycline and alkylating agent-resistant soft tissue sarcoma and suggest use in the second- and third-line setting. More recently, trabectedin has shown similar progression-free survival to doxorubicin in the first-line setting and significant activity in liposarcoma and leiomyosarcoma subtypes. Trabectedin has shown a favorable toxicity profile and has been approved in over 70 countries for the treatment of metastatic soft tissue sarcoma. This manuscript will review the development of trabectedin in soft tissue sarcomas.

  15. Are those bugs reflective? Non-destructive biofilm imaging with white light interferometry

    Energy Technology Data Exchange (ETDEWEB)

    Larimer, Curtis J.; Brann, Michelle R.; Suter, Jonathan D.; Bonheyo, George T.; Addleman, Raymond S.

    2016-08-28

    White light interferometry (WLI) is not typically used to image bacterial biofilms that are immersed in water because there is insufficient refractive index contrast to induce reflection from the biofilm’s interface. The soft structure and water-like bulk properties of hydrated biofilms make them difficult to characterize in situ by any means, especially in a non-destructive manner. Here we describe a new method for measuring and monitoring the thickness and topology of live biofilms using a WLI microscope. A microfluidic system was used to create a reflective interface on the surface of biofilms. Live biofilm samples were monitored non-destructively over time. The method enables surface metrology measurements (roughness, surface area) and a novel approach to measuring thickness of the thin hydrated biofilms. Increase in surface roughness preceded observable increase in biofilm thickness, indicating that this measure may be used to predict future development of biofilms. We have also developed a flow cell that enables WLI biofilm imaging in a dynamic environment. We have used this flow cell to observe changes in biofilm structure in response to changes in environmental conditions - flow velocity, availability of nutrients, and presence of biocides.

  16. Development of High-frequency Soft Magnetic Materials for Power Electronics

    Directory of Open Access Journals (Sweden)

    LIU Jun-chang

    2017-05-01

    Full Text Available The new requirements of high-frequency magnetic properties are put forward for electronic components with the rapid development of power electronics industry and the use of new electromagnetic materials. The properties of magnetic core, which is the key unit of electronic components, determine the performance of electronic components directly. Therefore, it's necessary to study the high-frequency soft magnetic materials. In this paper, the development history of four types of soft magnetic materials was reviewed. The advantages and disadvantages of each kind of soft magnetic materials and future development trends were pointed out. The emphases were placed on the popular soft magnetic composite materials in recent years. The tendency is to develop high-frequency soft magnetic composite materials with the particle size controllable, uniform coating layer on the core and a mass production method from laboratory to industrialization.

  17. The Parameter Reduction of Fuzzy Soft Sets Based on Soft Fuzzy Rough Sets

    Directory of Open Access Journals (Sweden)

    Zhiming Zhang

    2013-01-01

    Full Text Available Fuzzy set theory, rough set theory, and soft set theory are three effective mathematical tools for dealing with uncertainties and have many wide applications both in theory and practise. Meng et al. (2011 introduced the notion of soft fuzzy rough sets by combining fuzzy sets, rough sets, and soft sets all together. The aim of this paper is to study the parameter reduction of fuzzy soft sets based on soft fuzzy rough approximation operators. We propose some concepts and conditions for two fuzzy soft sets to generate the same lower soft fuzzy rough approximation operators and the same upper soft fuzzy rough approximation operators. The concept of reduct of a fuzzy soft set is introduced and the procedure to find a reduct for a fuzzy soft set is given. Furthermore, the concept of exclusion of a fuzzy soft set is introduced and the procedure to find an exclusion for a fuzzy soft set is given.

  18. A rapid non-destructive method for quantification of fungal infection on barley and malt

    DEFF Research Database (Denmark)

    Bodevin, Sabrina; Larsen, Tone Glarborg; Lok, Finn

    Description of topic: Barley harvest 2007 in Europe has seen the resurgence of crops highly infected by filamentous fungi. Hence the evaluation of fungal infection on barley and malt kernels by conventional optical measurement methods lacks accuracy and can be tedious. Here we are presenting a new...... camera. The digital image is acquired in less than 10 seconds, over an 18 bands spanning ranging from the ultra-blue (430 nm) to the near-infrared (970 nm) and then analyzed by the VideometerLab® statistical analysis software. Materials and methods for data collection: Sixty European barley samples from...... of Fusarium and hydrophobins were selected and highly infected kernels, artificially inoculated with F. culmorum or F. graminearum, were produced. Results: A good correlation between competitive ELISA tests, real-time PCR experiments and VideometerLab® prediction was found (R2=0.75). The results obtained...

  19. Rapid decision tool to predict earthquake destruction in Sumatra by using first motion study

    Science.gov (United States)

    Bhakta, Shardul Sanjay

    The main idea of this project is to build an interactive and smart Geographic Information system tool which can help predict intensity of real time earthquakes in Sumatra Island of Indonesia. The tool has an underlying intelligence to predict the intensity of an earthquake depending on analysis of similar earthquakes in the past in that specific region. Whenever an earthquake takes place in Sumatra, a First Motion Study is conducted; this decides its type, depth, latitude and longitude. When the user inputs this information into the input string, the tool will try to find similar earthquakes with a similar First Motion Survey and depth. It will do a survey of similar earthquakes and predict if this real time earthquake can be disastrous or not. This tool has been developed in JAVA. I have used MOJO (Map Objects JAVA Objects) to show map of Indonesia and earthquake locations in the form of points. ESRI has created MOJO which is a set of JAVA API's. The Indonesia map, earthquake location points and its co-relation was all designed using MOJO. MOJO is a powerful tool which made it easy to design the tool. This tool is easy to use and the user has to input only a few parameters for the end result. I hope this tool justifies its use in prediction of earthquakes and help save lives in Sumatra.

  20. Asian origin and rapid global spread of the destructive dry rot fungus Serpula lacrymans.

    Science.gov (United States)

    Kauserud, Håvard; Svegården, Ingeborg Bjorvand; Saetre, Glenn-Peter; Knudsen, Henning; Stensrud, Øyvind; Schmidt, Olaf; Doi, Shuichi; Sugiyama, Tomoaki; Högberg, Nils

    2007-08-01

    The dry rot fungus Serpula lacrymans (Basidiomycota) is the most damaging destroyer of wood construction materials in temperate regions. While being a widespread aggressive indoor biodeterioration agent, it is only found in a few natural environments. The geographical source of spread and colonization by this fungus in human environments is thus somewhat of an enigma. Employing genetic markers (amplified fragment length polymorphisms, DNA sequences and microsatellites) on a worldwide sample of specimens, we show that the dry rot fungus is divided into two main lineages; one nonaggressive residing naturally in North America and Asia (var. shastensis), and another aggressive lineage including specimens from all continents, both from natural environments and buildings (var. lacrymans). Our genetic analyses indicate that the two lineages represent well-differentiated cryptic species. Genetic analyses pinpoint mainland Asia as the origin of the aggressive form var. lacrymans. A few aggressive genotypes have migrated worldwide from Asia to Europe, North and South America and Oceania followed by local population expansions. The very low genetic variation in the founder populations indicate that they have established through recent founder events, for example by infected wood materials transported over land or sea. A separate colonization has happened from mainland Asia to Japan. Our data also indicate that independent immigration events have happened to Oceania from different continents followed by admixture.

  1. Soft technologies, hard choices.

    Science.gov (United States)

    Norman, C

    1979-01-01

    In the years since the 1st United Nations conference on science, technology, and development in 1963, technology has come under scrutiny and criticism. The 2nd such UN Conference was held in August 1979 and initiated a reassessment of technological development in all countries. The following problems are not amenable to Western-style technology: 1) unemployment; 2) disparities of wealth both inter- and intracountry; and 3) energy needs. Simple transference of technology from the rich to the poor countries will not create badly needed jobs. That is not to say that much capital-intensive technology, e.g., that used in producing chemical fertilizers, is not useful to developing countries. There is a need to spread capital resources and the benefits therefrom more broadly. For example, in the health field, efforts should be made to meet basic health needs rather than invest in expensive medical technology and high-cost hospitals. All the assumptions of rapid economic development for the less developed countries were made in the era of inexpensive energy sources. There is now a need to develop and use technologies utilizing renewable energy sources. Modern technology seems to be placing a stress on the world's biological systems. Certain technologies may simply be incompatible with the need to sustain the earth and its resources. Government efforts will be needed to supplement market action. A world of diversified technologies is envisioned.

  2. Hard evidence on soft skills✩

    Science.gov (United States)

    Heckman, James J.; Kautz, Tim

    2012-01-01

    This paper summarizes recent evidence on what achievement tests measure; how achievement tests relate to other measures of “cognitive ability” like IQ and grades; the important skills that achievement tests miss or mismeasure, and how much these skills matter in life. Achievement tests miss, or perhaps more accurately, do not adequately capture, soft skills—personality traits, goals, motivations, and preferences that are valued in the labor market, in school, and in many other domains. The larger message of this paper is that soft skills predict success in life, that they causally produce that success, and that programs that enhance soft skills have an important place in an effective portfolio of public policies. PMID:23559694

  3. High performance soft magnetic materials

    CERN Document Server

    2017-01-01

    This book provides comprehensive coverage of the current state-of-the-art in soft magnetic materials and related applications, with particular focus on amorphous and nanocrystalline magnetic wires and ribbons and sensor applications. Expert chapters cover preparation, processing, tuning of magnetic properties, modeling, and applications. Cost-effective soft magnetic materials are required in a range of industrial sectors, such as magnetic sensors and actuators, microelectronics, cell phones, security, automobiles, medicine, health monitoring, aerospace, informatics, and electrical engineering. This book presents both fundamentals and applications to enable academic and industry researchers to pursue further developments of these key materials. This highly interdisciplinary volume represents essential reading for researchers in materials science, magnetism, electrodynamics, and modeling who are interested in working with soft magnets. Covers magnetic microwires, sensor applications, amorphous and nanocrystalli...

  4. Destruction of meat and bone meals in cement plants; Destruction des farines animales dans les cimenteries

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    2001-10-01

    Following the crisis of the bovine spongiform encephalopathy disease ('mad cow' disease), the French cement industrialists have been requested by the government since 1996 to eliminate the forbidden meat and bone meals in cement kilns where they are used as fuel substitutes. This article presents the advantages of the cement industry file in the destruction of such wastes, the validation and the safety aspects of this process. Meat and bone meal represents a high-grade fuel that lowers the environmental impact of cement production and does not affect the quality of cement. (J.S.)

  5. NITRATE DESTRUCTION LITERATURE SURVEY AND EVALUATION CRITERIA

    Energy Technology Data Exchange (ETDEWEB)

    Steimke, J.

    2011-02-01

    This report satisfies the initial phase of Task WP-2.3.4 Alternative Sodium Recovery Technology, Subtask 1; Develop Near-Tank Nitrate/Nitrite Destruction Technology. Some of the more common anions in carbon steel waste tanks at SRS and Hanford Site are nitrate which is corrosive, and nitrite and hydroxide which are corrosion inhibitors. At present it is necessary to periodically add large quantities of 50 wt% caustic to waste tanks. There are three primary reasons for this addition. First, when the contents of salt tanks are dissolved, sodium hydroxide preferentially dissolves and is removed. During the dissolution process the concentration of free hydroxide in the tank liquid can decrease from 9 M to less than 0.2 M. As a result, roughly half way through the dissolution process large quantities of sodium hydroxide must be added to the tank to comply with requirements for corrosion control. Second, hydroxide is continuously consumed by reaction with carbon dioxide which occurs naturally in purge air used to prevent buildup of hydrogen gas inside the tanks. The hydrogen is generated by radiolysis of water. Third, increasing the concentration of hydroxide increases solubility of some aluminum compounds, which is desirable in processing waste. A process that converts nitrate and nitrite to hydroxide would reduce certain costs. (1) Less caustic would be purchased. (2) Some of the aluminum solid compounds in the waste tanks would become more soluble so less mass of solids would be sent to High Level Vitrification and therefore it would be not be necessary to make as much expensive high level vitrified product. (3) Less mass of sodium would be fed to Saltstone at SRS or Low Level Vitrification at Hanford Site so it would not be necessary to make as much low level product. (4) At SRS less nitrite and nitrate would be sent to Defense Waste Processing Facility (DWPF) so less formic acid would be consumed there and less hydrogen gas would be generated. This task involves

  6. Standard Neutrosophic Soft Theory: Some First Results

    Directory of Open Access Journals (Sweden)

    Bui Cong Cuong

    2016-08-01

    Full Text Available The traditional soft set is a mapping from a parameter set to family of all crisp subsets of a universe. Molodtsov introduced the soft set as a generalized tool for modelling complex systems involving uncertain or not clearly defined objects. In this paper, the notion of neutrosophic soft set is reanalysed. The novel theory is a combination of neutrosophic set theory and soft set theory. The complement, “and”, “or”, intersection and union operations are defined on the neutrosophic soft sets. The neutrosophic soft relations accompanied with their compositions are also defined. The basic properties of the neutrosophic soft sets, neutrosophic soft relations and neutrosophic soft compositions are also discussed.

  7. Soft Pneumatic Actuators for Rehabilitation

    Directory of Open Access Journals (Sweden)

    Guido Belforte

    2014-05-01

    Full Text Available Pneumatic artificial muscles are pneumatic devices with practical and various applications as common actuators. They, as human muscles, work in agonistic-antagonistic way, giving a traction force only when supplied by compressed air. The state of the art of soft pneumatic actuators is here analyzed: different models of pneumatic muscles are considered and evolution lines are presented. Then, the use of Pneumatic Muscles (PAM in rehabilitation apparatus is described and the general characteristics required in different applications are considered, analyzing the use of proper soft actuators with various technical properties. Therefore, research activity carried out in the Department of Mechanical and Aerospace Engineering in the field of soft and textile actuators is presented here. In particular, pneumatic textile muscles useful for active suits design are described. These components are made of a tubular structure, with an inner layer of latex coated with a deformable outer fabric sewn along the edge. In order to increase pneumatic muscles forces and contractions Braided Pneumatic Muscles are studied. In this paper, new prototypes are presented, based on a fabric construction and various kinds of geometry. Pressure-force-deformation tests results are carried out and analyzed. These actuators are useful for rehabilitation applications. In order to reproduce the whole upper limb movements, new kind of soft actuators are studied, based on the same principle of planar membranes deformation. As an example, the bellows muscle model and worm muscle model are developed and described. In both cases, wide deformations are expected. Another issue for soft actuators is the pressure therapy. Some textile sleeve prototypes developed for massage therapy on patients suffering of lymph edema are analyzed. Different types of fabric and assembly techniques have been tested. In general, these Pressure Soft Actuators are useful for upper/lower limbs treatments

  8. Entirely soft dielectric elastomer robots

    Science.gov (United States)

    Henke, E.-F. Markus; Wilson, Katherine E.; Anderson, Iain A.

    2017-04-01

    Multifunctional Dielectric Elastomer (DE) devices are well established as actuators, sensors and energy har- vesters. Since the invention of the Dielectric Elastomer Switch (DES), a piezoresistive electrode that can directly switch charge on and off, it has become possible to expand the wide functionality of DE structures even more. We show the application of fully soft DE subcomponents in biomimetic robotic structures. It is now possible to couple arrays of actuator/switch units together so that they switch charge between them- selves on and off. One can then build DE devices that operate as self-controlled oscillators. With an oscillator one can produce a periodic signal that controls a soft DE robot - a DE device with its own DE nervous system. DESs were fabricated using a special electrode mixture, and imprinting technology at an exact pre-strain. We have demonstrated six orders of magnitude change in conductivity within the DES over 50% strain. The control signal can either be a mechanical deformation from another DE or an electrical input to a connected dielectric elastomer actuator (DEA). We have demonstrated a variety of fully soft multifunctional subcomponents that enable the design of autonomous soft robots without conventional electronics. The combination of digital logic structures for basic signal processing, data storage in dielectric elastomer flip-flops and digital and analogue clocks with adjustable frequencies, made of dielectric elastomer oscillators (DEOs), enables fully soft, self-controlled and electronics-free robotic structures. DE robotic structures to date include stiff frames to maintain necessary pre-strains enabling sufficient actuation of DEAs. Here we present a design and production technology for a first robotic structure consisting only of soft silicones and carbon black.

  9. Mapping piezoelectric response in nanomaterials using a dedicated non-destructive scanning probe technique.

    Science.gov (United States)

    Calahorra, Yonatan; Smith, Michael; Datta, Anuja; Benisty, Hadas; Kar-Narayan, Sohini

    2017-12-14

    There has been tremendous interest in piezoelectricity at the nanoscale, for example in nanowires and nanofibers where piezoelectric properties may be enhanced or controllably tuned, thus necessitating robust characterization techniques of piezoelectric response in nanomaterials. Piezo-response force microscopy (PFM) is a well-established scanning probe technique routinely used to image piezoelectric/ferroelectric domains in thin films, however, its applicability to nanoscale objects is limited due to the requirement for physical contact with an atomic force microscope (AFM) tip that may cause dislocation or damage, particularly to soft materials, during scanning. Here we report a non-destructive PFM (ND-PFM) technique wherein the tip is oscillated into "discontinuous" contact during scanning, while applying an AC bias between tip and sample and extracting the piezoelectric response for each contact point by monitoring the resulting localized deformation at the AC frequency. ND-PFM is successfully applied to soft polymeric (poly-l-lactic acid) nanowires, as well as hard ceramic (barium zirconate titanate-barium calcium titanate) nanowires, both previously inaccessible by conventional PFM. Our ND-PFM technique is versatile and compatible with commercial AFMs, and can be used to correlate piezoelectric properties of nanomaterials with their microstructural features thus overcoming key characterisation challenges in the field.

  10. Soft QGP probes with ALICE

    CERN Document Server

    Graczykowski, Łukasz Kamil

    2016-01-01

    In heavy-ion collisions at the LHC a hot and dense medium of deconfided partons, the Quark-Gluon Plasma (QGP), is created. Its global properties can be characterized by the measurements of particles in the low transverse momentum (or "soft") regime, which represent the majority of created particles. In this report we outline a selection of measurements of the soft probes by the ALICE experiment in pp, p--Pb, and Pb--Pb collisions. The paper focuses on recent flow measurements via angular correlations and femtoscopic studies. The first ever preliminary analysis of $\\mathrm{K}^0_{\\rm S}\\mathrm{K}^{\\pm}$ femtoscopy is also presented.

  11. Biomechanical properties of soft tissues

    Science.gov (United States)

    Zeng, Yanjun; Xu, Chuanqing; Yang, Jian; Xu, Xiaohu

    2003-06-01

    Viscoelasticity is the primary mechanical property of bio-soft tissues. It has been widely applied in basic research of biological tissues including cornea, lung, heart and blood vessels. Along with the development of tissue engineering research, the evaluation of soft tissue viscoelasticity is becoming more and more important. In this paper, using the Whittaker function, we give an approximate power series of the exponential integral E 1( X) and the parameters C, ⦦1 and ⦦2 of the generalized relaxation function G(t) and generalized creep function J(t). With expanded skin as an example, the relationship between stress relaxation, creep and stress-strain finite deformation are studied.

  12. ``Soft X-ray transient'' outbursts which are not soft

    NARCIS (Netherlands)

    Brocksopp, C.; Bandyopadhyay, R.M.; Fender, R.P.

    2004-01-01

    We have accumulated multiwavelength (X-ray, optical, radio) lightcurves for the eight black hole X-ray binaries which have been observed to enter a supposed `soft X-ray transient' outburst, but remained in the low/hard state throughout the outburst. Comparison of the lightcurve morphologies,

  13. Nova Ophiuchus 2017 as a Probe of 13C Nucleosynthesis and Carbon Monoxide Formation and Destruction in Classical Novae

    Science.gov (United States)

    Joshi, Vishal; Banerjee, D. P. K.; Srivastava, Mudit

    2017-12-01

    We present a series of near-infrared spectra of Nova Ophiuchus 2017 in the K band that record the evolution of the first overtone CO emission in unprecedented detail. Starting from 11.7 days after maximum, when CO is first detected at great strength, the spectra track the CO emission to +25.6 days by which time it is found to have rapidly declined in strength by almost a factor of ∼35. The cause for the rapid destruction of CO is examined in the framework of different mechanisms for CO destruction, namely, an increase in photoionizating flux, chemical pathways of destruction, or destruction by energetic nonthermal particles created in shocks. From LTE modeling of the CO emission, the 12C/13C ratio is determined to be 1.6 ± 0.3. This is consistent with the expected value of this parameter from nucleosynthesis theory for a nova eruption occuring on a low mass (∼ 0.6 {M}ȯ ) carbon–oxygen core white dwarf. The present 12C/13C estimate constitutes one of the most secure estimates of this ratio in a classical nova.

  14. Soft Neutrosophic Bi-LA-semigroup and Soft Neutrosophic N-LA-seigroup

    Directory of Open Access Journals (Sweden)

    Mumtaz Ali

    2014-09-01

    Full Text Available Soft set theory is a general mathematical tool for dealing with uncertain, fuzzy, not clearly defined objects. In this paper we introduced soft neutrosophic biLA-semigroup,soft neutosophic sub bi-LA-semigroup, soft neutrosophic N -LA-semigroup with the discuission of some of their characteristics. We also introduced a new type of soft neutrophic bi-LAsemigroup, the so called soft strong neutrosophic bi-LAsemigoup which is of pure neutrosophic character. This is also extend to soft neutrosophic strong N-LA-semigroup. We also given some of their properties of this newly born soft structure related to the strong part of neutrosophic theory.

  15. Biocompatible nanostructured solid adhesives for biological soft tissues.

    Science.gov (United States)

    Okada, Masahiro; Nakai, Akira; Hara, Emilio Satoshi; Taguchi, Tetsushi; Nakano, Takayoshi; Matsumoto, Takuya

    2017-07-15

    Over the past few years, the development of novel adhesives for biological soft tissue adhesion has gained significant interest. Such adhesives should be non-toxic and biocompatible. In this study, we synthesized a novel solid adhesive using nanostructured hydroxyapatite (HAp) and evaluated its physical adhesion properties through in vitro testing with synthetic hydrogels and mouse soft tissues. The results revealed that HAp-nanoparticle dispersions and HAp-nanoparticle-assembled nanoporous plates showed efficient adhesion to hydrogels. Interestingly, the HAp plates showed different adhesive properties depending upon the shape of their nanoparticles. The HAp plate made up of 17nm-sized nanoparticles showed an adhesive strength 2.2times higher than that of the conventional fibrin glue for mouse skin tissues. The present study indicates a new application of inorganic biomaterials (bioceramics) as a soft tissue adhesive. Organic adhesives such as fibrin glues or cyanoacrylate derivatives have been commonly used clinically. However, their limited biocompatibility and/or low adhesion strength are some drawbacks that impair their clinical application. In this study, we synthesized a novel solid adhesive with biocompatible and biodegradable HAp nanoparticles without the aid of organic molecules, and showed a rapid and strong adhesion of mouse soft tissues compared to conventional fibrin glues. Given the importance of wet adhesion in biomedicine and biotechnology applications, our results will help not only in developing an efficient approach to close incised soft tissues, but also in finding novel ways to integrate soft tissues with synthetic hydrogels (such as drug reservoirs). Copyright © 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  16. Soft Neutrosophic Groupoids and Their Generalization

    Directory of Open Access Journals (Sweden)

    Mumtaz Ali

    2014-12-01

    Full Text Available Soft set theory is a general mathematical tool for dealing with uncertain, fuzzy, not clearly defined objects. In this paper we introduced soft neutrosophic groupoid and their generalization with the discuissionf of some of their characteristics. We also introduced a new type of soft neutrophic groupoid, the so called soft strong neutrosophic goupoid which is of pure neutrosophic character. This notion also found in all the other corresponding notions of soft neutrosophic thoery. We also given some of their properties of this newly born soft structure related to the strong part of neutrosophic theory.

  17. Thermal destruction of vessels with liquid upon heating

    Science.gov (United States)

    Zverev, V. G.; Goldin, V. D.; Svetashkov, A. A.

    2016-04-01

    A new engineering technique of calculating the heating and thermal destruction of vessels containing liquid under extreme thermal loading conditions is offered. The heating of the shell and the internal vessel volume is described on the basis of the thermodynamic approach. The pressure growth in a vessel is a result of gas heating and liquid evaporation. Stresses within the shell and its destruction conditions are determined, which allows predicting the critical time of destruction upon heating. The calculation and experimental data for pressure growth inside the vessel are in good agreement.

  18. "Cold combustion" as a new method of toxic waste destruction

    Directory of Open Access Journals (Sweden)

    Екатерина Юрьевна Ткаченко

    2015-05-01

    Full Text Available This article describes a promising new method for the destruction of toxic industrial waste, obsolete pesticides and military poisons and explosives. The proposed method can be used to create mobile modular units that will produce the destruction of the "field", to clean the soil and water containing low concentrations of a pollutant, to solve the problem of disposal of explosives, which is often accompanied by the destruction of uncontrolled detonation. The proposed method is environmentally friendly, using ice as the working body

  19. On the use of conventional and soft computing models for prediction of gross calorific value (GCV) of coal

    Energy Technology Data Exchange (ETDEWEB)

    Erik, N.Y.; Yilmaz, I. [Cumhuriyet University, Sivas (Turkey). Dept. of Geological Engineering

    2011-07-01

    Gross calorific value (GCV) is an important characteristic of coal and organic shale; the determination of GCV, however, is difficult, time-consuming, and expensive and is also a destructive analysis. In this article, the use of some soft computing techniques such as ANNs (artificial neural networks) and ANFIS (adaptive neuro-fuzzy inference system) for predicting GCV (gross calorific value) of coals is described and compared with the traditional statistical model of MR (multiple regression). This article shows that the constructed ANFIS models exhibit high performance for predicting GCV. The use of soft computing techniques will provide new approaches and methodologies in prediction of some parameters in investigations about the fuel.

  20. Nanomedicine a soft matter perspective

    CERN Document Server

    Pan, Dipanjan

    2014-01-01

    This book provides a broad introduction to soft matters for nanomedicinal applications, with a deeper discussion of the individual modalities for molecular imaging. It includes a general introduction to the opportunities provided by this technology in chemistry, materials, biology and nanomedicine. It is designed and written with the perspective that anyone, with or without previous knowledge of nanotechnology, would benefit.

  1. Rotational alignment in soft nuclei

    Energy Technology Data Exchange (ETDEWEB)

    Nojarov, R. (Bylgarska Akademiya na Naukite, Sofia. Inst. po Yadrena Fizika i Yadrena Energetika)

    1983-12-08

    It is shown that in transitional odd-A nuclei, where the rotation-aligned coupling scheme usually takes place, the low collective angular momentum states of the decoupled band are not completely aligned due to core softness. This is illustrated on the example of La-nuclei.

  2. Electrophoresis of diffuse soft particles

    NARCIS (Netherlands)

    Duval, J.F.L.; Ohshima, H.

    2006-01-01

    A theory is presented for the electrophoresis of diffuse soft particles in a steady dc electric field. The particles investigated consist of an uncharged impenetrable core and a charged diffuse polyelectrolytic shell, which is to some extent permeable to ions and solvent molecules. The diffuse

  3. Grounding experiments on soft bottoms

    DEFF Research Database (Denmark)

    Sterndorff, M.J.; Pedersen, Preben Terndrup

    1996-01-01

    To verify a theoretical analysis procedure for calculation of the hull girder response of ships running aground, a series of large-scale ship grounding experiments was performed on an artificial island made of engineered fill. The tests were conducted by running a condemned fishing vessel up...... for grounding on soft bottoms....

  4. Imaging of soft tissue tumors

    National Research Council Canada - National Science Library

    Schepper, A. M. A. de; Vanhoenacker, F; Parizel, P. M; Gielen, Jacques

    2006-01-01

    ... studies. The scientific value of the BSTNR increased with the installation of a peer-review group of pathologists, all of whom shared a large amount of experience in soft tissue tumor pathology. They reviewed the pathological findings of all malignant tumors, all exceptional tumors, and all tumors in which there was a discordance between...

  5. Soft-Collinear Effective Theory

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    I will review the basic principles about Soft-Collinear Effective Theory. I will focus on how it can be used to understand factorization properties and how one can resum large logarithms arising from infrared physics using the renormalization group evolution.

  6. Soft QCD measurements at LHC

    CERN Document Server

    Tasevsky, Marek; The ATLAS collaboration

    2018-01-01

    Results from recent soft QCD measurements by LHC experiments ALICE, ATLAS, CMS, LHCb, LHCf and TOTEM are reported. The measurements include total, elastic and inelastic cross sections, inclusive and identified particle spectra, underlying event and hadronic chains. Results from particle correlations in all three collision systems, namely pp, pPb and PbPb, exhibit unexpected similarities.

  7. Soft QCD Measurements at LHC

    CERN Document Server

    Tasevsky, Marek; The ATLAS collaboration

    2017-01-01

    Results of recent soft QCD measurements by LHC experiments ALICE, ATLAS, CMS, LHCb, LHCf and TOTEM are reported. The measurements include total, elastic and inelastic cross sections, inclusive and identified particle spectra, underlying event and particle correlations in all three collision systems: pp, pPb and PbPb.

  8. Hard Thinking about Soft Skills

    Science.gov (United States)

    Claxton, Guy; Costa, Arthur L.; Kallick, Bena

    2016-01-01

    People use various terms to refer to traits and tendencies connected to social-emotional behavior and ways of thinking or approaching problems--from 21st century skills to mindsets to habits of mind. Such traits are also often called soft skills or non-cognitive skills. The authors contend that these latter terms imply that these traits and…

  9. Indications for destructive eye surgeries at the Yaounde Gynaeco-Obstetric and Paediatric Hospital

    Directory of Open Access Journals (Sweden)

    Eballé A

    2011-05-01

    Full Text Available André Omgbwa Eballé1,2, Viola Andin Dohvoma3, Godefroy Koki3, Abdouramani Oumarou2, Assumpta Lucienne Bella3, Côme Ebana Mvogo11Faculty of Medicine and Pharmaceutical Sciences, University of Douala, Cameroon; 2Gynaeco-Obstetric and Paediatric Hospital, Yaoundé, Cameroon; 3Faculty of Medicine and Biomedical Sciences, University of Yaoundé I, CameroonObjective: To determine the indications and rate of acceptance for destructive eye surgeries at the ophthalmology unit of the Yaoundé Gynaeco-Obstetric and Paediatric Hospital.Methods: A retrospective consecutive case series in which the medical records of all patients consulting in this unit over a 9-year period (2002 to 2010 were reviewed. Records in which destructive surgery was recommended were retained. Information collected included demographic data, eye affected, clinical diagnosis, acceptance or refusal of surgery, and the outcome in those in whom surgery was performed.Results: A total of 48 patients had a recommendation for destructive eye surgery, of whom 30 (62.5% were males and 18 (37.5% were females. Mean age was 43.78 (SD = 28.11; range 1 month to 91 years. Children <10 years comprised 23.10%. The leading causes were endophthalmitis/panophthalmitis (47.9%, neoplasm (20.8%, and absolute glaucoma (14.6%. Surgery was done in 20 cases (41.7%. Evisceration was the most performed surgical procedure (50%, with endophthalmitis/panophthalmitis and neoplasm combined accounting for 65% of surgeries.Conclusion: The high rate of refusal is an indication of the psychological devastation undergone by patients or the families of children in whom eye removal is recommended. Awareness should be raised on preventive measures and the need to rapidly seek eye care.Keywords: destructive eye surgery, endophthalmitis, neoplasm

  10. Rapid scenarios and observed intensities

    Directory of Open Access Journals (Sweden)

    Franco Pettenati

    2012-10-01

    Full Text Available After a destructive earthquake, national Governments need to know the approximate amount of damage, the number of casualties, and the financial losses as soon as possible. Rapid scenarios are also used to inform the general public; see the widely used Shakemap package [Wald et al. 1999, 2006] of the US Geological Survey (USGS and the one modified by the Istituto Nazionale di Geofisica e Vulcanologia (INGV; National Institute of Geophysics and Volcanology, which is reproduced for Figure 1. The general matter of the use of intensities in damage scenarios was discussed in a special session at the 2008 Annual Meeting of the Seismological Society of America (http://www.seismosoc.org/meetings/2008/specialsessions.html, and was also discussed in the NIS-1 session of the European Congress in Moscow, in August 2012 (http://www.esc2012-moscow.org/esc_thematicareas.html. The purposes of the present report are to: (i compare different types of intensities; (ii check two rapid scenarios of intensity; and (iii understand whether the KF formula [Sirovich 1996, Sirovich et al. 2009] can be used as a new 'attenuation' relationship to improve rapid scenarios. […

  11. Autonomous Soft Robotic Fish Capable of Escape Maneuvers Using Fluidic Elastomer Actuators

    Science.gov (United States)

    Onal, Cagdas D.; Rus, Daniela

    2014-01-01

    Abstract In this work we describe an autonomous soft-bodied robot that is both self-contained and capable of rapid, continuum-body motion. We detail the design, modeling, fabrication, and control of the soft fish, focusing on enabling the robot to perform rapid escape responses. The robot employs a compliant body with embedded actuators emulating the slender anatomical form of a fish. In addition, the robot has a novel fluidic actuation system that drives body motion and has all the subsystems of a traditional robot onboard: power, actuation, processing, and control. At the core of the fish's soft body is an array of fluidic elastomer actuators. We design the fish to emulate escape responses in addition to forward swimming because such maneuvers require rapid body accelerations and continuum-body motion. These maneuvers showcase the performance capabilities of this self-contained robot. The kinematics and controllability of the robot during simulated escape response maneuvers are analyzed and compared with studies on biological fish. We show that during escape responses, the soft-bodied robot has similar input–output relationships to those observed in biological fish. The major implication of this work is that we show soft robots can be both self-contained and capable of rapid body motion. PMID:27625912

  12. Stages of Adult Soft Tissue Sarcoma

    Science.gov (United States)

    ... Tissue Sarcoma Treatment Childhood Vascular Tumors Treatment Research Adult Soft Tissue Sarcoma Treatment (PDQ®)–Patient Version General Information About Adult Soft Tissue Sarcoma Go to Health Professional Version ...

  13. Subleading soft graviton theorem for loop amplitudes

    National Research Council Canada - National Science Library

    Sen, Ashoke

    2017-01-01

    ... or more. We prove the subleading soft graviton theorem in these theories to all orders in perturbation theory for S-matrix elements of arbitrary number of finite energy external states but only one external soft graviton...

  14. Interval Valued Fuzzy Neutrosophic Soft Structure Spaces

    Directory of Open Access Journals (Sweden)

    I. Arockiarani

    2014-09-01

    Full Text Available In this paper we introduce the topological structure of interval valued fuzzy neutrosophic soft sets and obtain some of its properties. We also investigate some operators of interval valued fuzzy neutrosophic soft topological space.

  15. Planar Elongation Measurements on Soft Elastomers

    DEFF Research Database (Denmark)

    Jensen, Mette Krog; Skov, Anne Ladegaard; Rasmussen, Henrik K.

    2009-01-01

    A new fixture to the filament stretch rheometer (FSR) has been developed to measure planar elongation of soft polymeric networks. To validate this new technique, soft polymeric networks of poly(propyleneoxide) (PPO) were investigated during deformation....

  16. Prediction accuracy of soft tissue profile in orthognathic surgery.

    Science.gov (United States)

    Mankad, B; Cisneros, G J; Freeman, K; Eisig, S B

    1999-01-01

    The purpose of this study was to compare soft tissue prediction accuracy of model surgery combined with computer software prediction with that of computer software prediction alone and to assess surgical accuracy by comparing the immediate postsurgical cephalogram with the planned movement of skeletal hard tissue. The predicted and actual soft tissue changes and the corresponding skeletal changes of 16 patients were compared using the Quick Ceph Image cephalometric treatment simulation software. A custom analysis was created to measure the hard tissue and soft tissue changes that occurred as a result of the surgical procedure. On average, the predictions were not significantly different from the actual postsurgical profile changes. Surgical changes of hard tissues from presurgery to postsurgery were accurate as planned except for the position of N-ANS. All lower soft tissue points moved significantly during treatment. Quick Ceph Image offers a rapid and reliable method of profile prediction that does not require artistic skill. If predictions are interpreted with caution and transferred accurately to the model surgery, they can provide an excellent visual aid during presurgical treatment planning and patient presentation.

  17. Non-invasive and non-destructive characterization of tissue engineered constructs using ultrasound imaging technologies: a review

    OpenAIRE

    Kim, Kang; Wagner, William R.

    2015-01-01

    With the rapid expansion of biomaterial development and coupled efforts to translate such advances toward the clinic, non-invasive and non-destructive imaging tools to evaluate implants in situ in a timely manner are critically needed. The required multilevel information is comprehensive, including structural, mechanical, and biological changes such as scaffold degradation, mechanical strength, cell infiltration, extracellular matrix formation and vascularization to name a few. With its inher...

  18. Non-destructive foraminiferal paleoclimatic proxies: A brief insight

    Digital Repository Service at National Institute of Oceanography (India)

    Saraswat, R.

    Non-Destructive Foraminiferal Paleoclimatic Proxies: A Brief Insight The knowledge of past climate can help us to understand imminent climatic changes. Oceans are the vast archives of past climate. Various indirect techniques termed as proxies...

  19. Destruction of Aflatoxins in Contaminated Maize Samples using ...

    African Journals Online (AJOL)

    alice

    Ammoniation procedures may be considered suitable for large scale destruction of aflatoxins that contaminate foodstuffs stored in warm moist places. Key words: Aflatoxins, contaminated foodstuffs, ammoniation procedures. INTRODUCTION. Aflatoxins are mold metabolites of Aspergillus flavus and Aspergillus parasiticus.

  20. Destructive electronics from electrochemical-mechanically triggered chemical dissolution

    Science.gov (United States)

    Sim, Kyoseung; Wang, Xu; Li, Yuhang; Linghu, Changhong; Gao, Yang; Song, Jizhou; Yu, Cunjiang

    2017-06-01

    The considerable need to enhance data and hardware security suggest one possible future for electronics where it is possible to destroy them and even make them disappear physically. This paper reports a type of destructive electronics which features fast transience from chemical dissolution on-demand triggered in an electrochemical-mechanical manner. The detailed materials, mechanics, and device construction of the destructive electronics are presented. Experiment and analysis of the triggered releasing and transience study of electronic materials, resistors and metal-oxide-semiconductor field effect transistors illustrate the key aspects of the destructive electronics. The reported destructive electronics is useful in a wide range of areas from security and defense, to medical applications

  1. 27 CFR 479.24 - Destructive device determination.

    Science.gov (United States)

    2010-04-01

    ..., FIREARMS, AND EXPLOSIVES, DEPARTMENT OF JUSTICE FIREARMS AND AMMUNITION MACHINE GUNS, DESTRUCTIVE DEVICES... provision of law for any device which he believes is not likely to be used as a weapon shall submit a...

  2. Time Domain Terahertz Axial Computed Tomography Non Destructive Evaluation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to demonstrate key elements of feasibility for a high speed automated time domain terahertz computed axial tomography (TD-THz CT) non destructive...

  3. Time Domain Terahertz Axial Computed Tomography Non Destructive Evaluation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this Phase 2 project, we propose to develop, construct, and deliver to NASA a computed axial tomography time-domain terahertz (CT TD-THz) non destructive...

  4. Assessing biological and technical variation in destructively measured data

    NARCIS (Netherlands)

    Tijskens, L.M.M.; Konopacki, P.J.; Jongbloed, G.; Penchaiya, P.; Schouten, R.E.

    2017-01-01

    The majority of experimental data are obtained by destructive measuring techniques. Inevitably, in all these data variation is present, sometimes small and negligible, sometimes large, preventing proper analysis and extraction of meaningful information by traditional statistical techniques

  5. Weapons of Mass Destruction: Texas National Guard Initiatives

    National Research Council Canada - National Science Library

    Sterner, Jeanette

    2000-01-01

    .... The era of conventional weapons and conventional tactics is over. The arsenal of the world is now comprised of chemical, biological and nuclear weapons collectively known as weapons of mass destruction (WMD...

  6. Predicting Tropical Cyclone Destructive Potential by Integrated Kinetic Energy According to the Powell/Reinhold Scale

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — A method of predicting the destructive capacity of a tropical cyclone based on a new Wind Destructive Potential (WDP) and Storm Surge Destructive Potential (SDP)...

  7. Soft Power and Smart Power in Africa

    Science.gov (United States)

    2008-12-01

    World Politics , 1st ed. (New York: Public Affairs, 2004), x. 2. CSIS Commission on Smart Power: A Smarter, More Secure America (Washington, D.C...4. Ibid. 5. Nye, Soft Power: The Means to Success in World Politics , xi and 1. 6. Ernest J. Wilson III, "Hard Power, Soft Power, Smart Power," The...548. 25. Nye, Soft Power: The Means to Success in World Politics , 5. 26. Nye, Public Diplomacy and Soft Power, 95. 27. Nye, Limits of American Power

  8. Applications of Soft Sets in -Algebras

    Directory of Open Access Journals (Sweden)

    N. O. Alshehri

    2013-01-01

    Full Text Available In 1999, Molodtsov introduced the concept of soft set theory as a general mathematical tool for dealing with uncertainty and vagueness. In this paper, we apply the concept of soft sets to K-algebras and investigate some properties of Abelian soft K-algebras. We also introduce the concept of soft intersection K-algebras and investigate some of their properties.

  9. Cartilage destruction in rheumatoid arthritis, its association with functional impairments

    Directory of Open Access Journals (Sweden)

    Natalia Vladimirovna Chichasova

    2014-01-01

    Full Text Available The paper discusses the mechanisms of destructive processes in rheumatoid arthritis (RA. At the present stage, in addition to suppress inflammation, the goals of treatment are to prevent cartilage and bone destruction in the affected joints. Prediction of destructive processes in RA plays an important role as the irreversibility of functional changes in RA directly correlates with the degree of joint injury. The paper discusses the mechanisms of articular cartilage and bone destruction and the significance of different biochemical markers for estimating the degree of injury and for predicting further destruction of small hand and foot joints. In RA, the investigators identify not only clinical (activity indicators, but also biological (bone, cartilage, and synovium damage markers predictors for joint injury: CТXII is a marker for cartilage degradation (collagen type II and CTXI is a marker for bone degradation (collagen type I and their trends over 4–12 or more weeks. Although the occurrence of erosions is considered to be a major manifestation of joint destruction progression in RA, the functional activity in its early stages is shown to depend on the estimate of joint space narrowing (cartilage degradation to a greater extent than on that of erosions when evaluating the destruction by the modified Sharp method. Several randomized placebocontrolled studies (RPCSs have assessed the association of patients' functional capacity with joint space narrowing or with the number of erosions. In RA, cartilage degradation has been demonstrated to play a larger role in irreversible function loss than bone destruction.The possibility of suppressing cartilage degradation, which is indicated in RPCSs of the efficacy of adalimumab, correlates with a better functional outcome in patients with RA. Serum markers for cartilage metabolism may be not only predictors for further radiographic progression, but also be used to evaluate therapeutic effectiveness.

  10. Cartilage destruction in rheumatoid arthritis, its association with functional impairments

    Directory of Open Access Journals (Sweden)

    Natalia Vladimirovna Chichasova

    2014-12-01

    Full Text Available The paper discusses the mechanisms of destructive processes in rheumatoid arthritis (RA. At the present stage, in addition to suppress inflammation, the goals of treatment are to prevent cartilage and bone destruction in the affected joints. Prediction of destructive processes in RA plays an important role as the irreversibility of functional changes in RA directly correlates with the degree of joint injury. The paper discusses the mechanisms of articular cartilage and bone destruction and the significance of different biochemical markers for estimating the degree of injury and for predicting further destruction of small hand and foot joints. In RA, the investigators identify not only clinical (activity indicators, but also biological (bone, cartilage, and synovium damage markers predictors for joint injury: CТXII is a marker for cartilage degradation (collagen type II and CTXI is a marker for bone degradation (collagen type I and their trends over 4–12 or more weeks. Although the occurrence of erosions is considered to be a major manifestation of joint destruction progression in RA, the functional activity in its early stages is shown to depend on the estimate of joint space narrowing (cartilage degradation to a greater extent than on that of erosions when evaluating the destruction by the modified Sharp method. Several randomized placebocontrolled studies (RPCSs have assessed the association of patients' functional capacity with joint space narrowing or with the number of erosions. In RA, cartilage degradation has been demonstrated to play a larger role in irreversible function loss than bone destruction.The possibility of suppressing cartilage degradation, which is indicated in RPCSs of the efficacy of adalimumab, correlates with a better functional outcome in patients with RA. Serum markers for cartilage metabolism may be not only predictors for further radiographic progression, but also be used to evaluate therapeutic effectiveness.

  11. Hardware for soft computing and soft computing for hardware

    CERN Document Server

    Nedjah, Nadia

    2014-01-01

    Single and Multi-Objective Evolutionary Computation (MOEA),  Genetic Algorithms (GAs), Artificial Neural Networks (ANNs), Fuzzy Controllers (FCs), Particle Swarm Optimization (PSO) and Ant colony Optimization (ACO) are becoming omnipresent in almost every intelligent system design. Unfortunately, the application of the majority of these techniques is complex and so requires a huge computational effort to yield useful and practical results. Therefore, dedicated hardware for evolutionary, neural and fuzzy computation is a key issue for designers. With the spread of reconfigurable hardware such as FPGAs, digital as well as analog hardware implementations of such computation become cost-effective. The idea behind this book is to offer a variety of hardware designs for soft computing techniques that can be embedded in any final product. Also, to introduce the successful application of soft computing technique to solve many hard problem encountered during the design of embedded hardware designs. Reconfigurable em...

  12. How Soft are “Soft Skills” in Engineering Educations?

    DEFF Research Database (Denmark)

    Bruun-Pedersen, Jon Ram; Kofoed, Lise

    2015-01-01

    Engineering education communities have long recognized that graduates not only need to poses technical knowledge in their chosen disciplines, but also need to be better educated in areas of communication skills, teamwork and leadership. Several studies mention these so-called “soft” skills...... as increasingly important for future engineers. Such skills include communication, cooperation, creativity, leadership and organization. For many years, the engineering educations at Aalborg University have been working with the Problem Based and Project Organized Learning pedagogical approach. An important part...... transfer theory into practice. In addition to their project, students have to make a “Process Analysis”, which is an evaluation of their experience of the soft skills or process competences. Results show that “Soft Skills” are hard to learn....

  13. The Combine Use of Semi-destructive and Non-destructive Methods for Tiled Floor Diagnostics

    Science.gov (United States)

    Štainbruch, Jakub; Bayer, Karol; Jiroušek, Tomáš; Červinka, Josef

    2017-04-01

    The combination of semi-destructive and non-destructive methods was used to asset the conditions of a tiled floor in the historical monument Minaret, situated in the park complex of the Chateau Lednice (South Moravia Region, Czech Republic), before its renovation. Another set of measurements is going to be performed after the conservation works are finished. (The comparison of the results collected during pre- and post-remediation measurements will be known and presented during the General Assembly meeting in Wien.) The diagnostic complex of methods consisted of photogrammetry, resistivity drilling and georadar. The survey was aimed to contour extends of air gaps beneath the tiles and the efficiency of filling gaps by means of injection, consolidation and gluing individual layers. The state chateau Lednice creates a part of the Lednice-Valtice precinct, a UNESCO landmark, and belongs among the greatest historic monuments in Southern Moravia. In the chateau park there is a romantic observation tower in the shape of a minaret built according to the plans of Josef Hardtmuth between 1798-1804. The Minaret has been extensively renovated for many decades including the restoration of mosaic floors from Venetian terazzo. During the static works of the Minaret building between 1999-2000, the mosaic floors in the rooms on the second floor were transferred and put back onto concrete slabs. Specifically, the floor was cut up to tiles and these were glued to square slabs which were then attached to the base plate. The transfer was not successful and the floor restoration was finalized between 2016-2017. The damage consisted in separating the original floor from the concrete plate which led to creating gaps. Furthermore, the layers of the floor were not compact. It was necessary to fill the gaps and consolidate and glue the layers. The existence of air gap between individual layers of the tiles and their degradation was detected using two different diagnostic methods: semi-destructive

  14. Influence of plasticizer on soft polymer gelation.

    Science.gov (United States)

    Jones, D W; Sutow, E J; Graham, B S; Milne, E L; Johnston, D E

    1986-05-01

    An evaluation has been made of the soft polymer gel systems of the type used as prosthodontic short-term denture-lining materials. The purpose of the study was to determine the effect upon gel strength and gelation time produced by variations in the composition of the plasticizer liquids. Poly(ethylmethacrylate) co-polymers were mixed with combinations of ethyl alcohol and the esters dibutyl phthalate (DBP), butylphthalyl butylglycolate (BPBG), and benzyl salicylate (BS). The relative rate of gelation of plasticizer polymer compositions was obtained by means of a reciprocating rheometer. The gelation rate was found to increase rapidly with an increase in the ethyl alcohol content. Significantly shorter gelation times were also found with liquids containing the lower-molecular-weight esters. A linear relationship was found between the ethyl alcohol content and the log of the gelation time. The higher-molecular-weight esters produced the strongest gel. A linear relationship was found between the gelation (log) times and the seven-day puncture strength. The ratio of polymer to plasticizer liquid was found to have a very significant influence upon the puncture strength and gelation time. Molecular weight or molecular volume of the ester plasticizers was found to have a greater influence on gel formation than the cohesive energy parameter. The strong polar bonding of ethyl alcohol was found to have a significant influence on both the rate of gel formation and the subsequent gel strength. The data indicate that controlled variations in the characteristics of plasticity and gel strength of dental soft polymer systems can be made to suit different clinical prosthodontic requirements.

  15. Necrotizing soft tissue infection in pregnancy

    Directory of Open Access Journals (Sweden)

    Nestorović Milica

    2017-01-01

    Full Text Available Introduction. Necrotizing soft tissue infection (NSTI is a life-threatening condition, characterized by widely spread necrosis of skin, subcutaneous fat, fascia and muscles. Treatment involves surgical debridement and broad-spectrum antimicrobial therapy. Mortality is still high due to diagnostic delays. NSTI is rare in general population, there are even less literature data of this condition in pregnancy. Timely diagnosis and therapy is crucial for outcome of these patients. Clinicians should have in mind NSTI in patients with perianal infections, especially in cases where immunosuppressive role of pregnancy is present. Case outline. We present a case of a 21-year-old pregnant woman with NSTI spreading from perianal region. The patient was admitted to hospital in the 31st week of otherwise healthy twin pregnancy one day after incision of perianal abscess. At admission she was examined by a gynecologist; vital signs were stable, laboratory results showed the presence of infection. She was referred for another surgical procedure and broad-spectrum antibiotics were prescribed. The next morning the patient complained of intense abdominal pain. Clinical exam revealed only discrete redness of the skin tender on palpation, crepitating. She was immediately referred to surgery. Intraoperative findings revealed massive soft tissue infection spreading up to the chest wall. Wide skin incisions and debridement were performed. The patient developed septic shock and after initial resuscitation gynecologist confirmed intrauterine death of twins and indicated labor induction. Over the next few days the patient’s general condition improved. On several occasions the wounds were aggressively debrided under general anesthesia, which left the patient with large abdominal wall defect. Twenty-three days after the initial operation, the defect was reconstructed with partial-thickness skin grafts, providing satisfactory results. Conclusion. Diagnosis and outcome of

  16. The results of cutting disks testing for rock destruction

    Directory of Open Access Journals (Sweden)

    Khoreshok Aleksey

    2017-01-01

    Full Text Available To determine the rational order of disk tools placement on the working body is necessary to know the maximum amount of rock, destroyed by the disk tool in benching cutting mode depending on the tool geometry parameters, physical and mechanical parameters of rocks. The article contains the definition of rational parameters of cutting disk tools as well as power and energy parameters of the destruction process by cutting disks and by executive body of the coal cutter. The rational geometric parameters of cutting discs are specified. It was found that each step of cutting with a minimum depth of penetration has its own maximum height of bench outcrop. The dependence of the volumes of large items destroyed by the disk tool on the cutting step height was determined. The existence of the cyclic alternation of destruction phases, regardless the fracture parameters, the height of the ledge outcrop, and tools like free cutting geometry were found. In contrast to the free cutting in benching mode of destruction two large fragments of rocks in one cycle were observed. Consequently, the cyclical nature of the destruction process in the benching mode will be characterized by two chips and crushing, and this cycling repeats throughout the destruction process with the same parameters of destruction.

  17. Osteoclast inhibition impairs chondrosarcoma growth and bone destruction.

    Science.gov (United States)

    Otero, Jesse E; Stevens, Jeff W; Malandra, Allison E; Fredericks, Douglas C; Odgren, Paul R; Buckwalter, Joseph A; Morcuende, Jose

    2014-12-01

    Because Chondrosarcoma is resistant to available chemotherapy and radiation regimens, wide resection is the mainstay in treatment, which frequently results in high morbidity and which may not prevent local recurrence. There is a clear need for improved adjuvant treatment of this malignancy. We have observed the presence of osteoclasts in the microenvironment of chondrosarcoma in human pathological specimens. We utilized the Swarm rat chondrosarcoma (SRC) model to test the hypothesis that osteoclasts affect chondrosarcoma pathogenesis. We implanted SRC tumors in tibia of Sprague-Dawley rats and analyzed bone histologically and radiographically for bone destruction and tumor growth. At three weeks, tumors invaded local bone causing cortical disruption and trabecular resorption. Bone destruction was accompanied by increased osteoclast number and resorbed bone surface. Treatment of rats with the zoledronic acid prevented cortical destruction, inhibited trabecular resorption, and resulted in decreased tumor volume in bone. To confirm that inhibition of osteoclasts per se, and not off-target effects of drug, was responsible for the prevention of tumor growth and bone destruction, we implanted SRC into osteopetrotic rat tibia. SRC-induced bone destruction and tumor growth were impaired in osteopetrotic bone compared with control bone. The results from our animal model demonstrate that osteoclasts contribute to chondrosarcoma-mediated bone destruction and tumor growth and may represent a therapeutic target in particular chondrosarcoma patients. © 2014 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

  18. Wanted: Soft Skills for Today's Jobs

    Science.gov (United States)

    Hirsch, Barton J.

    2017-01-01

    Educating high school students for both college and career is difficult. Teaching trade skills seems alien to the academic culture. But new research indicates that soft skills are quite important to judgments of employability and that youth learn many soft skills in traditional academic subjects (e.g., literature). A focus on soft skills allows…

  19. Windchill-201 - Custom Soft-Type Construction

    Science.gov (United States)

    Jones, Corey; LaPha, Steven

    2013-01-01

    This presentation will explain Windchill soft-types-what they are, how they work, and how to construct custom ones, configured specifically for your system. The process and particulars of creating and implementing a WTDocument soft-type will be discussed, and the interaction between soft-types and Windchill objects will be shown.

  20. An Exponential Regulator for Rapidity Divergences

    Energy Technology Data Exchange (ETDEWEB)

    Li, Ye [Fermilab; Neill, Duff [MIT, Cambridge, CTP; Zhu, Hua Xing [MIT, Cambridge, CTP

    2016-04-01

    Finding an efficient and compelling regularization of soft and collinear degrees of freedom at the same invariant mass scale, but separated in rapidity is a persistent problem in high-energy factorization. In the course of a calculation, one encounters divergences unregulated by dimensional regularization, often called rapidity divergences. Once regulated, a general framework exists for their renormalization, the rapidity renormalization group (RRG), leading to fully resummed calculations of transverse momentum (to the jet axis) sensitive quantities. We examine how this regularization can be implemented via a multi-differential factorization of the soft-collinear phase-space, leading to an (in principle) alternative non-perturbative regularization of rapidity divergences. As an example, we examine the fully-differential factorization of a color singlet's momentum spectrum in a hadron-hadron collision at threshold. We show how this factorization acts as a mother theory to both traditional threshold and transverse momentum resummation, recovering the classical results for both resummations. Examining the refactorization of the transverse momentum beam functions in the threshold region, we show that one can directly calculate the rapidity renormalized function, while shedding light on the structure of joint resummation. Finally, we show how using modern bootstrap techniques, the transverse momentum spectrum is determined by an expansion about the threshold factorization, leading to a viable higher loop scheme for calculating the relevant anomalous dimensions for the transverse momentum spectrum.

  1. Dust Destruction in the ISM: A Re-Evaluation of Dust Lifetimes

    Science.gov (United States)

    Jones, A. P.; Nuth, J. A., III

    2011-01-01

    There is a long-standing conundrum in interstellar dust studies relating to the discrepancy between the time-scales for dust formation from evolved stars and the apparently more rapid destruction in supernova-generated shock waves. Aims. We re-examine some of the key issues relating to dust evolution and processing in the interstellar medium. Methods. We use recent and new constraints from observations, experiments, modelling and theory to re-evaluate dust formation in the interstellar medium (ISM). Results. We find that the discrepancy between the dust formation and destruction time-scales may not be as significant as has previously been assumed because of the very large uncertainties involved. Conclusions. The derived silicate dust lifetime could be compatible with its injection time-scale, given the inherent uncertainties in the dust lifetime calculation. The apparent need to re-form significant quantities of silicate dust in the tenuous interstellar medium may therefore not be a strong requirement. Carbonaceous matter, on the other hand, appears to be rapidly recycled in the ISM and, in contrast to silicates, there are viable mechanisms for its re-formation in the ISM.

  2. Applications of Soft Union Sets in the Ring Theory

    Directory of Open Access Journals (Sweden)

    Yongwei Yang

    2013-01-01

    through discussing quotient soft subsets, an approach for constructing quotient soft union rings is made. Finally, isomorphism theorems of λ,μ-soft union rings related to invariant soft sets are discussed.

  3. Soft computing for business intelligence

    CERN Document Server

    Pérez, Rafael; Cobo, Angel; Marx, Jorge; Valdés, Ariel

    2014-01-01

    The book Soft Computing for Business Intelligence is the remarkable output of a program based on the idea of joint trans-disciplinary research as supported by the Eureka Iberoamerica Network and the University of Oldenburg. It contains twenty-seven papers allocated to three sections: Soft Computing, Business Intelligence and Knowledge Discovery, and Knowledge Management and Decision Making. Although the contents touch different domains they are similar in so far as they follow the BI principle “Observation and Analysis” while keeping a practical oriented theoretical eye on sound methodologies, like Fuzzy Logic, Compensatory Fuzzy Logic (CFL), Rough Sets and other softcomputing elements. The book tears down the traditional focus on business, and extends Business Intelligence techniques in an impressive way to a broad range of fields like medicine, environment, wind farming, social collaboration and interaction, car sharing and sustainability.

  4. Soft Pomeron in Holographic QCD

    CERN Document Server

    Ballon-Bayona, Alfonso; Costa, Miguel S; Djurić, Marko

    2016-01-01

    We study the graviton Regge trajectory in Holographic QCD as a model for high energy scattering processes dominated by soft pomeron exchange. This is done by considering spin J fields from the closed string sector that are dual to glueball states of even spin and parity. In particular, we construct a model that governs the analytic continuation of the spin J field equation to the region of real J < 2, which includes the scattering domain of negative Maldelstam variable t. The model leads to approximately linear Regge trajectories and is compatible with the measured values of 1.08 for the intercept and 0.25 GeV$^{-2}$ for the slope of the soft pomeron. The intercept of the secondary pomeron trajectory is in the same region of the subleading trajectories, made of mesons, proposed by Donnachie and Landshoff, and should therefore be taken into account.

  5. In Defense of Soft Universalism

    DEFF Research Database (Denmark)

    Schaumburg-Müller, Sten

    2011-01-01

    The present paper is work in progress, a preliminary attempt to present a position of soft universalism as regards human rights. The position is not seen as a compromise between contradicting perceptions, universalism and relativism, but rather as a better and more correct position. It takes...... human rights is the emerging global society, and human rights law is therefore best understood as (part of) the law of this emerging society. Seen in this way, human rights are an attempt to cope with a (partly) new situation, based on knowledge of human beings and society, a knowledge which has...... improved considerably since the time of the natural rights theories and the enlightenment. As a consequence prevailing international human rights are not the only possible human rights, and soft universalism is therefore partially open as regards the content of human rights, even though non discrimination...

  6. Special relativity from soft gravitons

    Science.gov (United States)

    Hertzberg, Mark P.; Sandora, McCullen

    2017-10-01

    We study all translationally and rotationally invariant local theories involving massless spin 2 and spin 1 particles that mediate long range forces, allowing for general energy relations and violation of boost invariance. Although gauge invariance is not a priori required to describe non-Lorentz invariant theories, we first establish that locality requires soft gauge invariance. Then by taking the soft graviton limit in scattering amplitudes, we prove that in addition to the usual requirement of universal graviton couplings, the special relativistic energy-momentum relation is also required and must be exact. We contrast this to the case of theories with only spin ≤1 particles, where, although we can still derive charge conservation from locality, special relativity can be easily violated. We provide indications that the entire structure of relativity can be built up from spin 2 in this fashion.

  7. Nanoscale mixing of soft solids.

    Science.gov (United States)

    Choi, Soo-Hyung; Lee, Sangwoo; Soto, Haidy E; Lodge, Timothy P; Bates, Frank S

    2011-02-16

    Assessing the state of mixing on the molecular scale in soft solids is challenging. Concentrated solutions of micelles formed by self-assembly of polystyrene-block-poly(ethylene-alt-propylene) (PS-PEP) diblock copolymers in squalane (C(30)H(62)) adopt a body-centered cubic (bcc) lattice, with glassy PS cores. Utilizing small-angle neutron scattering (SANS) and isotopic labeling ((1)H and (2)H (D) polystyrene blocks) in a contrast-matching solvent (a mixture of squalane and perdeuterated squalane), we demonstrate quantitatively the remarkable fact that a commercial mixer can create completely random mixtures of micelles with either normal, PS(H), or deuterium-labeled, PS(D), cores on a well-defined bcc lattice. The resulting SANS intensity is quantitatively modeled by the form factor of a single spherical core. These results demonstrate both the possibility of achieving complete nanoscale mixing in a soft solid and the use of SANS to quantify the randomness.

  8. Microwave applications of soft ferrites

    CERN Document Server

    Pardavi-Horvath, M P

    2000-01-01

    Signal processing requires broadband, low-loss, low-cost microwave devices (circulators, isolators, phase shifters, absorbers). Soft ferrites (garnets, spinels, hexaferrites), applied in planar microwave devices, are reviewed from the point of view of device requirements. Magnetic properties, specific to operation in high-frequency electromagnetic fields, are discussed. Recent developments in thick film ferrite technology and device design are reviewed. Magnetic losses related to planar shape and inhomogeneous internal fields are analyzed.

  9. Soft Lithography using Nectar Droplets

    OpenAIRE

    Biswas, Saheli; Chakrabarti, Aditi; Chateauminois, Antoine; Wandersman, Elie; Prevost, Alexis M.; Chaudhury, Manoj K.

    2016-01-01

    In spite of significant advances in replication technologies, methods to produce well-defined three dimensional structures are still at its infancy. Such a limitation would be evident if we were to produce a large array of simple and, especially, compound convex lenses, also guaranteeing that their surfaces would be molecularly smooth. Here, we report a novel method to produce such structures by cloning the 3D shape of nectar drops, found widely in nature, using conventional soft lithography....

  10. Exercise and soft tissue injury.

    Science.gov (United States)

    Hart, L E

    1994-02-01

    Once the almost exclusive domain of the orthopaedic surgeon, sports injuries are now being seen with increasing frequency by other specialists, including rheumatologists. It is therefore important for rheumatologists to be able to diagnose and manage the various musculoskeletal conditions that are associated with physical activity. Soft tissue injuries are a very common cause of morbidity in both competitive and recreational athletes. Most of these conditions are provoked by muscle-tendon overload (or overuse) that is usually the result of excessive training or improper training techniques. However, despite an emerging literature on the natural history of soft tissue overuse syndromes, relatively little is known about the causes, incidence and outcome of many of these injuries. Of the methodologically robust epidemiological studies that have been done, most have focused on habitual distance runners. In this population, it has been reported that the incidence of injury can be as high as 50% or more, and that overtraining and the presence of previous injury are the most significant predictors of future injury. In other popular forms of exercise, such as walking, swimming, cycling, aerobics and racquet sports, injuries are also reported with high frequency but, to date, no prospective studies have examined actual incidences in these populations, and risk factors for injury in these activities remain speculative. Several of the more commonly occurring soft tissue injuries (such as rotator cuff tendinitis, lateral and medial epicondylitis, patellar tendinitis, the iliotibial band friction syndrome, Achilles tendinitis and plantar fasciitis) exemplify the overuse concept and are therefore highlighted in this review. The management of these, and most other, exercise-related soft tissue injuries is directed towards promptly restoring normal function and preventing re-injury.

  11. Advance Trends in Soft Computing

    CERN Document Server

    Kreinovich, Vladik; Kacprzyk, Janusz; WCSC 2013

    2014-01-01

    This book is the proceedings of the 3rd World Conference on Soft Computing (WCSC), which was held in San Antonio, TX, USA, on December 16-18, 2013. It presents start-of-the-art theory and applications of soft computing together with an in-depth discussion of current and future challenges in the field, providing readers with a 360 degree view on soft computing. Topics range from fuzzy sets, to fuzzy logic, fuzzy mathematics, neuro-fuzzy systems, fuzzy control, decision making in fuzzy environments, image processing and many more. The book is dedicated to Lotfi A. Zadeh, a renowned specialist in signal analysis and control systems research who proposed the idea of fuzzy sets, in which an element may have a partial membership, in the early 1960s, followed by the idea of fuzzy logic, in which a statement can be true only to a certain degree, with degrees described by numbers in the interval [0,1]. The performance of fuzzy systems can often be improved with the help of optimization techniques, e.g. evolutionary co...

  12. Relationship-based nursing care and destructive demands.

    Science.gov (United States)

    Kristoffersen, Margareth; Friberg, Febe

    2017-09-01

    The relationship between the nurse and the patient is understood as fundamental in nursing care. However, numerous challenges can be related to the provision of relationship-based nursing care. Challenges exist when nurses do not respond adequately to the patient's appeal for help. Moreover, challenges arising in the nurse-patient relationship can be understood as more destructive demands from the patient to the nurse, thus begging inquiry into such a relationship. The overall aim is to explore and argue the relevance of problematizing destructive demands evident within relationship-based nursing care. This theoretical article explores destructive demands based on the phenomenological philosophy of the Danish theologian and philosopher Knud E. Løgstrup and provides examples of nurses' experiences in everyday nursing care. The examples are drawn from a Norwegian empirical study based on a hermeneutical research design. Participants and research context: Data consisted of qualitative interviews and qualitative follow-up interviews with 13 nurses with varying work experience within the primary and secondary somatic and psychiatric health service, from inside as well as outside institutions. Ethical consideration: The original empirical study was approved by the Norwegian Social Science Data Services. Information was given and consent was obtained from the participants. Two themes are described: strong impressions formed in meetings with patients and persistent concern over the burden of work and ability to endure. Destructive demands related to relationship-based nursing care are discussed along two lines, first, by further elucidating nurses' everyday experiences connected to destructive demands and, second, by highlighting the significance of including destructive demands within the relationship-based nursing care. Including destructive demands related to relationship-based nursing care is of particular significance in enabling the proposition that radical, one

  13. Soft robotics: a bioinspired evolution in robotics.

    Science.gov (United States)

    Kim, Sangbae; Laschi, Cecilia; Trimmer, Barry

    2013-05-01

    Animals exploit soft structures to move effectively in complex natural environments. These capabilities have inspired robotic engineers to incorporate soft technologies into their designs. The goal is to endow robots with new, bioinspired capabilities that permit adaptive, flexible interactions with unpredictable environments. Here, we review emerging soft-bodied robotic systems, and in particular recent developments inspired by soft-bodied animals. Incorporating soft technologies can potentially reduce the mechanical and algorithmic complexity involved in robot design. Incorporating soft technologies will also expedite the evolution of robots that can safely interact with humans and natural environments. Finally, soft robotics technology can be combined with tissue engineering to create hybrid systems for medical applications. Copyright © 2013 Elsevier Ltd. All rights reserved.

  14. Host modulation of tissue destruction caused by periodontopathogens: effects on a mixed microbial infection composed of Porphyromonas gingivalis and Fusobacterium nucleatum.

    Science.gov (United States)

    Ebersole, J L; Feuille, F; Kesavalu, L; Holt, S C

    1997-07-01

    These studies determined the ability of selected periodontopathogens to synergistically initiate soft tissue destruction in a murine abscess model. The development of immunity following recovery from infection or by active immunization was also examined. Mice were infected with P. gingivalis W50, F. nucleatum T18, or a combination of the two microorganisms. F. nucleatum caused only a localized lesion in contrast to P. gingivalis which caused a spreading suppurative inflammatory lesion of the skin and subcutaneous tissues, which, depending upon the dose, could result in death. Infection of mice with a combination of P. gingivalis and F. nucleatum elicited a significantly greater lesion size (P<0.001) and lethality compared with P. gingivalis alone. Mice infected with a subclinical dose (no visible lesion) of P. gingivalis failed to develop protective immunity to a secondary P. gingivalis challenge. Mice that had recovered from P. gingivalis lesions demonstrated partial protection against subsequent P. gingivalis challenge; however, the immunity was less protective against the mixed F. nucleatum + P. gingivalis infection. Active immunization with P. gingivalis protected against both the P. gingivalis and F. nucleatum + P. gingivalis challenges and this protection was correlated with the levels of specific serum immunoglobulin G (IgG) antibody. The results indicated that the murine model is ideally suited to examine bacterially-mediated mixed infections that result in soft tissue destruction. This destruction can be minimized, but not abrogated, with development of immunity. Challenge with sufficient numbers of the pathogens can overwhelm the acquired immunity.

  15. Soft Cone Metric Spaces and Some Fixed Point Theorems

    OpenAIRE

    Altıntaş, İsmet; Taşköprü, Kemal

    2016-01-01

    This paper is an introduction to soft cone metric spaces. We define the concept of soft cone metric via soft element, investigate soft converges in soft cone metric spaces and prove some fixed point theorems for contractive mappings on soft cone metric spaces.

  16. Hamster and Murine Models of Severe Destructive Lyme Arthritis

    Directory of Open Access Journals (Sweden)

    Erik Munson

    2012-01-01

    Full Text Available Arthritis is a frequent complication of infection in humans with Borrelia burgdorferi. Weeks to months following the onset of Lyme borreliosis, a histopathological reaction characteristic of synovitis including bone, joint, muscle, or tendon pain may occur. A subpopulation of patients may progress to a chronic, debilitating arthritis months to years after infection which has been classified as severe destructive Lyme arthritis. This arthritis involves focal bone erosion and destruction of articular cartilage. Hamsters and mice are animal models that have been utilized to study articular manifestations of Lyme borreliosis. Infection of immunocompetent LSH hamsters or C3H mice results in a transient synovitis. However, severe destructive Lyme arthritis can be induced by infecting irradiated hamsters or mice and immunocompetent Borrelia-vaccinated hamsters, mice, and interferon-gamma- (IFN-γ- deficient mice with viable B. burgdorferi. The hamster model of severe destructive Lyme arthritis facilitates easy assessment of Lyme borreliosis vaccine preparations for deleterious effects while murine models of severe destructive Lyme arthritis allow for investigation of mechanisms of immunopathology.

  17. Indirect self-destructiveness in individuals with schizophrenia

    Directory of Open Access Journals (Sweden)

    Konstantinos Tsirigotis

    2017-06-01

    Full Text Available Objective: To explore the indirect self-destructiveness syndrome in patients with schizophrenia. Methods: Two hundred individuals with paranoid schizophrenia (117 men and 83 women, mean age 37.15 years, all in remission, were examined using the Polish version of the Chronic Self-Destructiveness Scale. Two hundred well-matched healthy individuals served as a control group. Results: The intensity of indirect self-destructiveness was greater in the schizophrenia group than in controls. The intensity of each manifestation was as follows (in decreasing order: helplessness and passiveness in the face of difficulties (A5, personal and social neglects (A3, lack of planfulness (A4, poor health maintenance (A2, transgression and risk (A1. Conclusion: Patients with schizophrenia displayed more behaviors that were indirectly self-destructive than healthy controls; they scored better than healthy controls only on caring for their own health. The patients showed the lowest intensity of behaviors connected with the active form of indirect self-destructiveness, and the highest intensity of behaviors connected with the passive form. These findings may enable delivery of more effective forms of pharmacological and psychosocial help to patients with schizophrenia.

  18. Hamster and Murine Models of Severe Destructive Lyme Arthritis

    Science.gov (United States)

    Munson, Erik; Nardelli, Dean T.; Du Chateau, Brian K.; Callister, Steven M.; Schell, Ronald F.

    2012-01-01

    Arthritis is a frequent complication of infection in humans with Borrelia burgdorferi. Weeks to months following the onset of Lyme borreliosis, a histopathological reaction characteristic of synovitis including bone, joint, muscle, or tendon pain may occur. A subpopulation of patients may progress to a chronic, debilitating arthritis months to years after infection which has been classified as severe destructive Lyme arthritis. This arthritis involves focal bone erosion and destruction of articular cartilage. Hamsters and mice are animal models that have been utilized to study articular manifestations of Lyme borreliosis. Infection of immunocompetent LSH hamsters or C3H mice results in a transient synovitis. However, severe destructive Lyme arthritis can be induced by infecting irradiated hamsters or mice and immunocompetent Borrelia-vaccinated hamsters, mice, and interferon-gamma- (IFN-γ-) deficient mice with viable B. burgdorferi. The hamster model of severe destructive Lyme arthritis facilitates easy assessment of Lyme borreliosis vaccine preparations for deleterious effects while murine models of severe destructive Lyme arthritis allow for investigation of mechanisms of immunopathology. PMID:22461836

  19. Centrifugal forming and mechanical properties of silicone-based elastomers for soft robotic actuators

    Science.gov (United States)

    Kulkarni, Parth

    This thesis describes the centrifugal forming and resulting mechanical properties of silicone-based elastomers for the manufacture of soft robotic actuators. This process is effective at removing bubbles that get entrapped within 3D-printed, enclosed molds. Conventional methods for rapid prototyping of soft robotic actuators to remove entrapped bubbles typically involve degassing under vacuum, with open-faced molds that limit the layout of formed parts to raised 2D geometries. As the functionality and complexity of soft robots increase, there is a need to mold complete 3D structures with controlled thicknesses or curvatures on multiples surfaces. In addition, characterization of the mechanical properties of common elastomers for these soft robots has lagged the development of new designs. As such, relationships between resulting material properties and processing parameters are virtually non-existent. One of the goals of this thesis is to provide guidelines and physical insights to relate the design, processing conditions, and resulting properties of soft robotic components to each other. Centrifugal forming with accelerations on the order of 100 g's is capable of forming bubble-free, true 3D components for soft robotic actuators, and resulting demonstrations in this work include an aquatic locomotor, soft gripper, and an actuator that straightens when pressurized. Finally, this work shows that the measured mechanical properties of 3D geometries fabricated within enclosed molds through centrifugal forming possess comparable mechanical properties to vacuumed materials formed from open-faced molds with raised 2D features.

  20. An integrated design and fabrication strategy for entirely soft, autonomous robots.

    Science.gov (United States)

    Wehner, Michael; Truby, Ryan L; Fitzgerald, Daniel J; Mosadegh, Bobak; Whitesides, George M; Lewis, Jennifer A; Wood, Robert J

    2016-08-25

    Soft robots possess many attributes that are difficult, if not impossible, to achieve with conventional robots composed of rigid materials. Yet, despite recent advances, soft robots must still be tethered to hard robotic control systems and power sources. New strategies for creating completely soft robots, including soft analogues of these crucial components, are needed to realize their full potential. Here we report the untethered operation of a robot composed solely of soft materials. The robot is controlled with microfluidic logic that autonomously regulates fluid flow and, hence, catalytic decomposition of an on-board monopropellant fuel supply. Gas generated from the fuel decomposition inflates fluidic networks downstream of the reaction sites, resulting in actuation. The body and microfluidic logic of the robot are fabricated using moulding and soft lithography, respectively, and the pneumatic actuator networks, on-board fuel reservoirs and catalytic reaction chambers needed for movement are patterned within the body via a multi-material, embedded 3D printing technique. The fluidic and elastomeric architectures required for function span several orders of magnitude from the microscale to the macroscale. Our integrated design and rapid fabrication approach enables the programmable assembly of multiple materials within this architecture, laying the foundation for completely soft, autonomous robots.

  1. Correlation between rearrangements and soft modes in polymer glasses during deformation and recovery.

    Science.gov (United States)

    Smessaert, Anton; Rottler, Jörg

    2015-11-01

    We explore the link between soft vibrational modes and local relaxation events in polymer glasses during physical aging, active deformation at constant strain rate, and subsequent recovery. A softness field is constructed out of the superposition of the amplitudes of the lowest energy normal modes, and found to predict up to 70% of the rearrangements. Overlap between softness and rearrangements increases logarithmically during aging and recovery phases as energy barriers rise due to physical aging, while yielding rapidly rejuvenates the overlap to that of a freshly prepared glass. In the strain hardening regime, correlations rise for uniaxial tensile deformation but not for simple shear. These trends can be explained by considering the differing degrees of localization of the soft modes in the two deformation protocols.

  2. Haemolysis following rapid experimental red blood cell transfusion--an evaluation of two infusion pumps

    DEFF Research Database (Denmark)

    Hansen, Tom Giedsing; Sprogøe-Jakobsen, U; Pedersen, C M

    1998-01-01

    The vast majority of infusion pumps used for rapid transfusion of large amounts of blood have never been properly examined regarding their influence on the quality of the red blood cells (RBCs) infused. In this study, we evaluated the effect of two different infusion pumps on the degree of RBC...... destruction following rapid experimental blood transfusion....

  3. Assessment of disinfectants in explosive destruction system for biological agent destruction : LDRD final report FY04.

    Energy Technology Data Exchange (ETDEWEB)

    Simmons, Blake Alexander; Didlake, John E. Jr.; Bradshaw, Robert W.; Crooker, Paul J.; Buffleben, George M.

    2005-01-01

    Treatment systems that can neutralize biological agents are needed to mitigate risks from novel and legacy biohazards. Tests with Bacillus thuringiensis and Bacillus steurothemophilus spores were performed in a 190-liter, 1-112 lb TNT equivalent rated Explosive Destruction System (EDS) system to evaluate its capability to treat and destroy biological agents. Five tests were conducted using three different agents to kill the spores. The EDS was operated in steam autoclave, gas fumigation and liquid decontamination modes. The first three tests used EDS as an autoclave, which uses pressurized steam to kill the spores. Autoclaving was performed at 130-140 deg C for up to 2-hours. Tests with chlorine dioxide at 750 ppm concentration for 1 hour and 10% (vol) aqueous chlorine bleach solution for 1 hour were also performed. All tests resulted in complete neutralization of the bacterial spores based on no bacterial growth in post-treatment incubations. Explosively opening a glass container to expose the bacterial spores for treatment with steam was demonstrated and could easily be done for chlorine dioxide gas or liquid bleach.

  4. SoftAR: visually manipulating haptic softness perception in spatial augmented reality.

    Science.gov (United States)

    Punpongsanon, Parinya; Iwai, Daisuke; Sato, Kosuke

    2015-11-01

    We present SoftAR, a novel spatial augmented reality (AR) technique based on a pseudo-haptics mechanism that visually manipulates the sense of softness perceived by a user pushing a soft physical object. Considering the limitations of projection-based approaches that change only the surface appearance of a physical object, we propose two projection visual effects, i.e., surface deformation effect (SDE) and body appearance effect (BAE), on the basis of the observations of humans pushing physical objects. The SDE visualizes a two-dimensional deformation of the object surface with a controlled softness parameter, and BAE changes the color of the pushing hand. Through psychophysical experiments, we confirm that the SDE can manipulate softness perception such that the participant perceives significantly greater softness than the actual softness. Furthermore, fBAE, in which BAE is applied only for the finger area, significantly enhances manipulation of the perception of softness. We create a computational model that estimates perceived softness when SDE+fBAE is applied. We construct a prototype SoftAR system in which two application frameworks are implemented. The softness adjustment allows a user to adjust the softness parameter of a physical object, and the softness transfer allows the user to replace the softness with that of another object.

  5. Soft tubular microfluidics for 2D and 3D applications

    Science.gov (United States)

    Xi, Wang; Kong, Fang; Yeo, Joo Chuan; Yu, Longteng; Sonam, Surabhi; Dao, Ming; Gong, Xiaobo; Teck Lim, Chwee

    2017-10-01

    Microfluidics has been the key component for many applications, including biomedical devices, chemical processors, microactuators, and even wearable devices. This technology relies on soft lithography fabrication which requires cleanroom facilities. Although popular, this method is expensive and labor-intensive. Furthermore, current conventional microfluidic chips precludes reconfiguration, making reiterations in design very time-consuming and costly. To address these intrinsic drawbacks of microfabrication, we present an alternative solution for the rapid prototyping of microfluidic elements such as microtubes, valves, and pumps. In addition, we demonstrate how microtubes with channels of various lengths and cross-sections can be attached modularly into 2D and 3D microfluidic systems for functional applications. We introduce a facile method of fabricating elastomeric microtubes as the basic building blocks for microfluidic devices. These microtubes are transparent, biocompatible, highly deformable, and customizable to various sizes and cross-sectional geometries. By configuring the microtubes into deterministic geometry, we enable rapid, low-cost formation of microfluidic assemblies without compromising their precision and functionality. We demonstrate configurable 2D and 3D microfluidic systems for applications in different domains. These include microparticle sorting, microdroplet generation, biocatalytic micromotor, triboelectric sensor, and even wearable sensing. Our approach, termed soft tubular microfluidics, provides a simple, cheaper, and faster solution for users lacking proficiency and access to cleanroom facilities to design and rapidly construct microfluidic devices for their various applications and needs.

  6. Soft tubular microfluidics for 2D and 3D applications.

    Science.gov (United States)

    Xi, Wang; Kong, Fang; Yeo, Joo Chuan; Yu, Longteng; Sonam, Surabhi; Dao, Ming; Gong, Xiaobo; Lim, Chwee Teck

    2017-10-03

    Microfluidics has been the key component for many applications, including biomedical devices, chemical processors, microactuators, and even wearable devices. This technology relies on soft lithography fabrication which requires cleanroom facilities. Although popular, this method is expensive and labor-intensive. Furthermore, current conventional microfluidic chips precludes reconfiguration, making reiterations in design very time-consuming and costly. To address these intrinsic drawbacks of microfabrication, we present an alternative solution for the rapid prototyping of microfluidic elements such as microtubes, valves, and pumps. In addition, we demonstrate how microtubes with channels of various lengths and cross-sections can be attached modularly into 2D and 3D microfluidic systems for functional applications. We introduce a facile method of fabricating elastomeric microtubes as the basic building blocks for microfluidic devices. These microtubes are transparent, biocompatible, highly deformable, and customizable to various sizes and cross-sectional geometries. By configuring the microtubes into deterministic geometry, we enable rapid, low-cost formation of microfluidic assemblies without compromising their precision and functionality. We demonstrate configurable 2D and 3D microfluidic systems for applications in different domains. These include microparticle sorting, microdroplet generation, biocatalytic micromotor, triboelectric sensor, and even wearable sensing. Our approach, termed soft tubular microfluidics, provides a simple, cheaper, and faster solution for users lacking proficiency and access to cleanroom facilities to design and rapidly construct microfluidic devices for their various applications and needs.

  7. THE EFFECTS OF MAXILLARY EXPANSION ON THE SOFT TISSUE FACIAL PROFILE

    Directory of Open Access Journals (Sweden)

    Işıl ARAS

    2017-10-01

    Full Text Available Purpose: The aims of this retrospective study were to evaluate the possible changes in soft tissue facial profile induced by orthopedic rapid maxillary expansion (RME and surgically assisted rapid maxillary expansion (SARME, and to correlate them with the underlying hard tissue alterations. Materials and Methods: 16 patients who received bone borne SARME and 25 patients who were subjected to RME using metal cast splint hyrax appliance were analyzed retrospectively. This research was conducted on lateral cephalometric radiographs taken on 2 occasions: before expansion (T1 and at the beginning of any further orthodontic treatment (T2. Investigated lateral cephalometric parameters consisted of Holdaway soft tissue measurements with some supplementary soft tissue, skeletal and dental assessments. Results: The acquisition of T2 cephalograms which conforms to the initiation of further orthodontic treatment corresponded to 83.25±3.51 days for SARME and 85.68±4.37 days for RME after the expansion was completed. The only significant change in soft tissue profile of the SARME group was a decrease in upper lip thickness (p<0.05, whereas in the RME group, decrease in soft tissue facial profile angle and increase in H angle were found to be statistically significant (p<0.05 for each. For the RME group, the changes in soft tissue facial profile angle and H angle correlated only with the changes in SNB angle (p<0.05. Conclusion: While bone-borne SARME did not seem to possess the potential to alter soft tissue profile, tooth-borne RME caused a more convex soft tissue profile related to a reduction in SNB.

  8. Winnicott on Jung: destruction, creativity and the unrepressed unconscious.

    Science.gov (United States)

    Meredith-Owen, William

    2011-02-01

    This paper considers Winnicott's critique of Jung, principally expressed in his review of Memories, Dreams, Reflections, which asserts that Jung's creative contribution to analysis was constrained by his failure to integrate his 'primitive destructive impulses', subsequent to inadequate early containment. It is argued that although Winnicott's diagnosis illuminates Jung's shadow, particularly his constraints vis-à-vis the repressed Freudian unconscious, it fails to appreciate the efficacy of the compensatory containment Jung found in the collective unconscious. This enigmatic relationship between destruction and creativity-so central to late Winnicott-is illuminated by Matte Blanco's bi-logic, and further explored in relation to William Blake. Winnicott's personal resolution through his Jung-inspired 'splitting headache' dream of destruction-previously considered in this Journal by Morey (2005) and Sedgwick (2008)-is given particular attention. © 2011, The Society of Analytical Psychology.

  9. Cooperation enhanced by habitat destruction in Prisoner's Dilemma Games

    Science.gov (United States)

    Yang, Xiqing; Wang, Wanxiong; Zhang, Feng; Qiao, Hongqiang

    2017-11-01

    The emergence and maintenance of cooperation is a fundamental problem within groups of selfish individuals, whereby we introduce a model of replicator equations based on the Prisoner's Dilemma game. In the present work, the effect of habitat destruction on the evolution of cooperation will be taken into account. Our results show that cooperators can receive the biggest boost for a moderate value of habitat destruction, and more serious habitat destruction will lead to lower levels of cooperation until zero. Moreover, we also reach the conclusion that the cooperation level decreases monotonously with the increasing of the ratio of cooperative cost to benefit but increases monotonously with the increasing of the encounter probability. Our findings can help to further understand the evolution of cooperation under the harsh external environment.

  10. [Role of microorganisms in the destruction of spodumene].

    Science.gov (United States)

    Karavaĭko, G I; Krutsko, V S; Mel'nikova, E O; Avakian, Z A; Ostroushko, Iu I

    1980-01-01

    A broad spectrum of microorganisms has been shown to be involved in the destruction of spodumene, a typical mineral of lithium pegmatites. The following microorganisms are most active: the microscopic fungi Penicillium notatum and Aspergillus niger, the thiobacilli Thiobacillus thiooxidans, and the so-called "silicate" slime forming bacterium Bacillus micilaginosus n. sp. siliceus. Spodumene destruction is accompanied with lithium, aluminium and silicon being transferred into solution. The activity of this process depends on the microbial species, the pH of the medium, and some other factors. Lithium and aluminium are extracted best of all at acid pH values whereas silicon at alkaline pH values. Possible mechanisms for spodumene destruction by microorganisms are discussed.

  11. On Weak and Strong Forms of Fuzzy Soft Open Sets

    Directory of Open Access Journals (Sweden)

    Sabir Hussain

    2016-12-01

    Full Text Available We introduce and examined some basic properties of fuzzy soft α-open (closed sets in fuzzy soft topological spaces. Fuzzy soft pre-open (closed sets are also defined and discussed. We also initiate and explore fuzzy soft neighborhood at fuzzy soft point. Some properties of fuzzy soft neighborhood system, fuzzy soft basic neighborhood and fuzzy soft neighborhood (nbd base at fuzzy soft point are studied. Moreover, we define and study fuzzy soft regular open (closed sets. We analyze the relationship between these notions by providing examples and counter examples.

  12. 27 CFR 25.223 - Destruction of beer off brewery premises.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false Destruction of beer off... TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS BEER Voluntary Destruction § 25.223 Destruction of beer off brewery premises. (a) Destruction without supervision. A brewer may destroy beer without...

  13. Gender differentiation in indirect self-destructiveness and suicide attempt methods (gender, indirect self-destructiveness, and suicide attempts).

    Science.gov (United States)

    Tsirigotis, Konstantinos; Gruszczyński, Wojciech; Tsirigotis-Maniecka, Marta

    2014-06-01

    The objective of this study is to examine the gender (sex) differentiation of indirect self-destructiveness and its manifestations as well as its relationships with suicide attempt methods in females and males. The study was conducted among 147 persons (114 females, 33 males) who attempted suicide. The research instrument was the polish version of the Chronic Self-Destructiveness Scale including Transgression and Risk, Poor Health Maintenance, Personal and Social Neglects, Lack of Planfulness, and Helplessness and Passiveness in the face of problems. Differences testing and correlation analyses were applied. Females scored higher on poor health maintenance and males scored significantly higher on personal and social neglects, lack of planfulness, and helplessness. Noteworthy is that the intensity of indirect self-destructiveness in females reached the same magnitude as in males. A number of statistically significant correlations were found between indirect self-destructiveness, or its manifestations, and the methods of suicide attempt in the two groups. Among these categories, the highest contribution was of helplessness and passiveness (both of groups), poor health maintenance (males), and personal and social neglects (females). Results of this study can be useful in the therapeutic efforts and prevention of not only indirectly self-destructive behaviours but also possible suicide attempts. Both preventive and therapeutic activities can take into account the specificity of those phenomena resulting from one's sex/gender. It is important to adapt preventive and therapeutic measures to psychological (personal) features that arise from an individual's sex/gender.

  14. Non-global and rapidity logarithms in narrow jet broadening

    Science.gov (United States)

    Becher, Thomas; Rahn, Rudi; Shao, Ding Yu

    2017-10-01

    We derive an all-order factorization theorem for the narrow jet broadening event shape, a measure of the transverse momentum in jet events. This is a non-global observable which receives logarithmically enhanced contributions associated with the large rapidity difference between soft and collinear radiation and which is also sensitive to soft recoil effects. Our work is the first factorization analysis of an observable of this type and we show that with regard to the non-global nature, the rapidity logarithms do not constitute an essential complication since they can be tied to the jet function, which is the same as for global observables. As a consequence, the leading non-global logarithms in narrow jet broadening are encoded in the same overall factor relevant for the hemisphere soft function and light jet mass.

  15. Soft Skills for Hard Impact

    Science.gov (United States)

    Grigorov, Ivo; Davidson, Joy; Knoth, Petr; Kuchma, Iryna; Schmidt, Birgit; Rettberg, Najla; Rogrigues, Eloy

    2015-04-01

    Marine and Earth Science graduates will be under increasing pressure in future to delve into research questions of relevance to societal challenges. Even fundamental research focused on basic processes of the environment and universe will in the coming decade need to justify their societal impact. As the Research Excellence Frameworks (REF) for research evaluation shift more and more away from the classical Impact Factor and number of peer-reviewed publications to "societal impact", the question remains whether the current graduates, and future researchers, are sufficiently prepared to deal with this reality. The essential compliment of skills beyond research excellence, rigor and method are traditionally described as "soft skills". This includes how to formulate an argument, how to construct a scientific publication, how to communicate such publications to non-experts, place them in context of societal challenges and relevant policies, how to write a competitive proposal and "market" one's research idea to build a research group around an interesting research topic. Such "soft skills" can produce very measurable and concrete impact for career development, but are rarely provided systematically and coherently by graduate schools in general. The presentation will focus on Open Science as a set of "soft skills", and demonstrate why graduate schools should train Open Science competencies alongside research excellence by default. Open Science is about removing all barriers to research process and outputs, both published and unpublished, and directly supports transparency and reproducibility of the research process. Open Science as a set of news competencies can also foster unexpected collaborations, engage citizen scientists into co-creation of solutions to societal challenges, as well as use concepts of Open Science to transfer new knowledge to the knowledge-based private sector, and help them with formulating more competitive research proposals in future.

  16. Hard Identity and Soft Identity

    Directory of Open Access Journals (Sweden)

    Hassan Rachik

    2006-04-01

    Full Text Available Often collective identities are classified depending on their contents and rarely depending on their forms. Differentiation between soft identity and hard identity is applied to diverse collective identities: religious, political, national, tribal ones, etc. This classification is made following the principal dimensions of collective identities: type of classification (univocal and exclusive or relative and contextual, the absence or presence of conflictsof loyalty, selective or totalitarian, objective or subjective conception, among others. The different characteristics analysed contribute to outlining an increasingly frequent type of identity: the authoritarian identity.

  17. Soft Time-Suboptimal Controlling Structure for Mechanical Systems

    DEFF Research Database (Denmark)

    Kulczycki, Piotr; Wisniewski, Rafal; Kowalski, Piotr

    2004-01-01

    The paper presents conception of a soft control structure based on the time-optimal approach. Its parameters are selected in accordance with the rules of the statistical decision theory and additionally it allows to eliminate rapid changes in control values. The object is a basic mechanical system......, with uncertain (also non-stationary) mass treated as a stochastic process. The methodology proposed here is of a universal nature and may easily be applied with respect to other uncertainty elements of timeoptimal controlled mechanical systems....

  18. Unintegrated gluon distribution and soft pp collisions at LHC

    CERN Document Server

    Grinyuk, A A; Lykasov, G I; Lipatov, A V; Zotov, N P

    2012-01-01

    We found the parameterization of the unintegrated gluon distribution from the best description of the LHC data on the inclusive spectra of hadrons produced in $pp$ collisions at the mid-rapidity region and small transverse momenta. It is different from the one obtained within perturbative QCD only at low intrinsic transverse momenta $k_t$. The application of this distribution to analysis of the $e-p$ DIS allows us to get the results which do not contradict the H1 and ZEUS data on the structure functions at low $x$. So, the connection between the soft processes at LHC and low-$x$ physics at HERA is found.

  19. Product acceptance environmental and destructive testing for reliability.

    Energy Technology Data Exchange (ETDEWEB)

    Dvorack, Michael A.; Kerschen, Thomas J.; Collins, Elmer W.

    2007-08-01

    To determine whether a component is meeting its reliability requirement during production, acceptance sampling is employed in which selected units coming off the production line are subjected to additional environmental and/or destructive tests that are within the normal environment space to which the component is expected to be exposed throughout its life in the Stockpile. This report describes what these tests are and how they are scored for reliability purposes. The roles of screens, Engineering Use Only tests, and next assembly product acceptance testing are also discussed, along with both the advantages and disadvantages of environmental and destructive testing.

  20. Coupled field induced conversion between destructive and constructive quantum interference

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Xiangqian, E-mail: xqjiang@hit.edu.cn; Sun, Xiudong

    2016-12-15

    We study the control of quantum interference in a four-level atom driven by three coherent fields forming a closed loop. The spontaneous emission spectrum shows two sets of peaks which are dramatically influenced by the fields. Due to destructive quantum interference, a dark line can be observed in the emission spectrum, and the condition of the dark line is given. We found that the conversion between destructive and constructive quantum interference can be achieved through controlling the Rabi frequency of the external fields.

  1. Destructive behavior of iron oxide in projectile impact

    Science.gov (United States)

    Shang, Wang; Xiaochen, Wang; Quan, Yang; Zhongde, Shan

    2017-12-01

    The damage strain values of Q235-A surface oxide scale were obtained by scanning electron microscopy (SEM/EDS) and universal tensile testing machine. The finite element simulation was carried out to study the destruction effects of oxidation at different impact rates. The results show that the damage value of the oxide strain is 0.08%. With the increase of the projectile velocity, the damage area of the oxide scale is increased, and the damage area is composed of the direct destruction area and the indirect failure area. The indirect damage area is caused by the stress/strain to the surrounding expansion after the impact of the steel body.

  2. Non-destructive state measurement of individual neutral atoms

    Science.gov (United States)

    Gibbons, Michael; Shih, Chung-Yu; Hamley, Chris; Chapman, Michael

    2011-05-01

    Non-destructive state detection of individual neutral atoms is essential for scalable neutral atom quantum information processing. We have demonstrated non-destructive fluorescent state detection of individual neutral atom qubits trapped in an optical lattice. The hyperfine state of the atom is measured with 95% accuracy and the atom loss rate of 1%. State detection is performed on individual atoms over 100 times before being lost from the trap, representing a significant increase in the data collection rates. Using this technique, we have observed microwave Rabi oscillations with measurements done on one-and-the-same atom.

  3. Job creation and destruction, worker reallocation and wages

    DEFF Research Database (Denmark)

    Belzil, Christian

    1997-01-01

    Using Danish firm level data on employment dynamics merged with individual records on all workers in a given firm, various measures of employment and worker reallocation used in the macroeconomics literature are incorporated in a wage equation framework. The effects of job creation/destruction an......Using Danish firm level data on employment dynamics merged with individual records on all workers in a given firm, various measures of employment and worker reallocation used in the macroeconomics literature are incorporated in a wage equation framework. The effects of job creation....../destruction and worker rellocation are estimated using standard panel data techniques. Brief results will go here!!!...

  4. Inefficient Job Destructions and Training with Hold-up

    DEFF Research Database (Denmark)

    Chéron, Arnaud; Rouland, Benedicte

    2011-01-01

    This paper develops an equilibrium search model with endogenous job destructions and where firms decide at the time of job entry how much to invest in match-specific human capital. We first show that job destruction and training investment decisions are strongly complementary. It is possible that...... that there are no firings at equilibrium. Further, training investments are confronted to a hold-up problem making the decentralized equilibrium always inefficient. We show therefore that both training subsidies and firing taxes must be implemented to bring back efficiency....

  5. Feather loss and feather destructive behavior in pet birds.

    Science.gov (United States)

    Rubinstein, Jonathan; Lightfoot, Teresa

    2014-01-01

    Feather loss in psittacine birds is a common and frustrating clinical presentation. Causes include medical and nonmedical causes of feather loss with and without overt feather destructive behavior. Underlying causes include inappropriate husbandry and housing; parasitic, viral and bacterial infections; metabolic and allergic diseases; and behavioral disorders. Prior to a diagnosis of a behavioral disorder, medical causes of feather loss must be excluded through a complete medical work-up including history, physical examination, and diagnostic testing. This article focuses on common medical and nonmedical causes of feather loss and feather destructive behavior and approaches to diagnosis and treatment. Copyright © 2014 Elsevier Inc. All rights reserved.

  6. An extremely broad band metamaterial absorber based on destructive interference.

    Science.gov (United States)

    Sun, Jingbo; Liu, Lingyun; Dong, Guoyan; Zhou, Ji

    2011-10-24

    We propose a design of an extremely broad frequency band absorber based on destructive interference mechanism. Metamaterial of multilayered SRRs structure is used to realize a desirable refractive index dispersion spectrum, which can induce a successive anti-reflection in a wide frequency range. The corresponding high absorptance originates from the destructive interference of two reflection waves from the two surfaces of the metamaterial. A strongly absorptive bandwidth of almost 60 GHz is demonstrated in the range of 0 to 70 GHz numerically. This design provides an effective and feasible way to construct broad band absorber in stealth technology, as well as the enhanced transmittance devices. © 2011 Optical Society of America

  7. Periodontium destruction associated with oncology therapy. Five case reports

    Energy Technology Data Exchange (ETDEWEB)

    Wright, W.E.

    1987-08-01

    Radiation treatment to the head and neck and cytotoxic chemotherapy can produce deleterious side effects to the periodontium that are generally transient in nature, reversible, and do not result in permanently visible defects. However, combinations of the malignant disease itself, the direct and indirect effects of medical therapy and associated oral infections, along with local trauma can lead to periodontal tissue destruction with resulting permanent architectural defects. Five case reports illustrate destructive alterations of the periodontium that were associated with oncology therapy. Proposed guidelines for periodontal treatment of compromised individuals undergoing oncology therapies are suggested.

  8. Formation and Destruction of Multilayered Tori in Coupled Map Systems

    DEFF Research Database (Denmark)

    Zhusubaliyev, Zh. T.; Mosekilde, Erik

    2008-01-01

    -node bifurcation in which the middle layer of a three-layered torus disappears in an abrupt transition to chaos while the outer-layer manifolds and their associated saddle and unstable-focus cycles continue to exist and to control the transient dynamics. In a second scenario, the unstable focus cycles...... and thereafter also the inner layer. The paper also illustrates how the formation and destruction of multilayered tori can occur in the cluster dynamics of an ensemble of globally coupled maps. This leads to three additional scenarios for the destruction of multilayered tori. ©2008 American Institute of Physics...

  9. The photon PDF in events with rapidity gaps

    Energy Technology Data Exchange (ETDEWEB)

    Harland-Lang, L.A. [University College London, Department of Physics and Astronomy, London (United Kingdom); Khoze, V.A. [Durham University, Institute for Particle Physics Phenomenology, Durham (United Kingdom); NRC Kurchatov Institute, Petersburg Nuclear Physics Institute, Moscow (Russian Federation); Ryskin, M.G. [NRC Kurchatov Institute, Petersburg Nuclear Physics Institute, Moscow (Russian Federation)

    2016-05-15

    We consider photon-initiated events with large rapidity gaps in proton-proton collisions, where one or both protons may break up. We formulate a modified photon PDF that accounts for the specific experimental rapidity gap veto, and demonstrate how the soft survival probability for these gaps may be implemented consistently. Finally, we present some phenomenological results for the two-photon induced production of lepton and W boson pairs. (orig.)

  10. The Heterogeneity of Job Creation and Destruction in Transition and Non-transition Developing Countries: The Effects of Firm Size, Age and Ownership

    Directory of Open Access Journals (Sweden)

    Haggai Kennedy Ochieng

    2017-12-01

    Full Text Available This paper investigates how firm age, size and ownership are related with job creation and destruction, and how these patterns differ across transition and non-transition economies. The analysis finds that age is inversely related with gross job creation and net job creation in the two samples. This finding is consistent with the theory of the learning effect. The relationship between age and job destruction is indifferent in non-transition economies. On the contrary, old firms in transition economies destroy more jobs than young ones. The paper further establishes an inverse relationship between size and gross job creation in the two groups. However, there is divergence between the two samples; small firms in non-transition economies also exhibit a higher gross job destruction rate. Consequently large firms have a higher net job creation rate. In transition economies, small and large firms exhibit similar rates of job destruction. But small firms retain a higher net job creation rate. A more intriguing finding is that state owned firms do not underperform domestic private ones. This means these countries may be using soft budget constraint which allows state owned firms to overstaff. Finally, crowding out of SMEs by foreign owned firms is not evident in transition economies.

  11. Necrotizing soft tissue infections: the surge of an old disease in a ...

    African Journals Online (AJOL)

    Background: Necrotizing soft tissue infection is an uncommon surgical condition characterized by rapidly spreading necrosis of the skin, subcutaneous tissue and adjoining fascia often associated with gas formation. It is frequently a polymicrobial infection and the combination of aerobic and anaerobic bacteria contributes to ...

  12. Renormalizations in softly broken SUSY gauge theories

    Science.gov (United States)

    Avdeev, L. V.; Kazakov, D. I.; Kondrashuk, I. N.

    1998-01-01

    The supergraph technique for calculations in supersymmetric gauge theories where supersymmetry is broken in a "soft" way (without introducing quadratic divergencies) is reviewed. By introducing an external spurion field the set of Feynman rules is formulated and explicit connections between the UV counterterms of a softly broken and rigid SUSY theories are found. It is shown that the renormalization constants of softly broken SUSY gauge theory also become external superfields depending on the spurion field. Their explicit form repeats that of the constants of a rigid theory with the redefinition of the couplings. The method allows us to reproduce all known results on the renormalization of soft couplings and masses in a softly broken theory. As an example the renormalization group functions for soft couplings and masses in the Minimal Supersymmetric Standard Model up to the three-loop level are calculated.

  13. Renormalizations in softly broken SUSY gauge theories

    Energy Technology Data Exchange (ETDEWEB)

    Avdeev, L.V.; Kazakov, D.I.; Kondrashuk, I.N. [Joint Inst. for Nuclear Research, Dubna (Russian Federation). Lab. of Theoretical Physics

    1998-01-19

    The supergraph technique for calculations in supersymmetric gauge theories where supersymmetry is broken in a ``soft`` way (without introducing quadratic divergencies) is reviewed. By introducing an external spurion field the set of Feynman rules is formulated and explicit connections between the UV counterterms of a softly broken and rigid SUSY theories are found. It is shown that the renormalization constants of softly broken SUSY gauge theory also become external superfields depending on the spurion field. Their explicit form repeats that of the constants of a rigid theory with the redefinition of the couplings. The method allows us to reproduce all known results on the renormalization of soft couplings and masses in a softly broken theory. As an example the renormalization group functions for soft couplings and masses in the minimal supersymmetric standard model up to the three-loop level are calculated. (orig.). 16 refs.

  14. Imaging of musculoskeletal soft tissue infections

    Energy Technology Data Exchange (ETDEWEB)

    Turecki, Marcin B.; Taljanovic, Mihra S.; Holden, Dean A.; Hunter, Tim B.; Rogers, Lee F. [University of Arizona HSC, Department of Radiology, Tucson, AZ (United States); Stubbs, Alana Y. [Southern Arizona VA Health Care System, Department of Radiology, Tucson, AZ (United States); Graham, Anna R. [University of Arizona HSC, Department of Pathology, Tucson, AZ (United States)

    2010-10-15

    Prompt and appropriate imaging work-up of the various musculoskeletal soft tissue infections aids early diagnosis and treatment and decreases the risk of complications resulting from misdiagnosis or delayed diagnosis. The signs and symptoms of musculoskeletal soft tissue infections can be nonspecific, making it clinically difficult to distinguish between disease processes and the extent of disease. Magnetic resonance imaging (MRI) is the imaging modality of choice in the evaluation of soft tissue infections. Computed tomography (CT), ultrasound, radiography and nuclear medicine studies are considered ancillary. This manuscript illustrates representative images of superficial and deep soft tissue infections such as infectious cellulitis, superficial and deep fasciitis, including the necrotizing fasciitis, pyomyositis/soft tissue abscess, septic bursitis and tenosynovitis on different imaging modalities, with emphasis on MRI. Typical histopathologic findings of soft tissue infections are also presented. The imaging approach described in the manuscript is based on relevant literature and authors' personal experience and everyday practice. (orig.)

  15. Nasal Soft-Tissue Triangle Deformities.

    Science.gov (United States)

    Foda, Hossam M T

    2016-08-01

    The soft-tissue triangle is one of the least areas attended to in rhinoplasty. Any postoperative retraction, notching, or asymmetries of soft triangles can seriously affect the rhinoplasty outcome. A good understanding of the risk factors predisposing to soft triangle deformities is necessary to prevent such problems. The commonest risk factors in our study were the wide vertical domal angle between the lateral and intermediate crura, and the increased length of intermediate crus. Two types of soft triangle grafts were described to prevent and treat soft triangle deformities. The used soft triangle grafts resulted in an excellent long-term aesthetic and functional improvement. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  16. Soft Classes and Soft Rough Classes with Applications in Decision Making

    Directory of Open Access Journals (Sweden)

    Faruk Karaaslan

    2016-01-01

    Full Text Available Rough set was defined by Pawlak in 1982. Concept of soft set was proposed as a mathematical tool to cope with uncertainty and vagueness by Molodtsov in 1999. Soft sets were combined with rough sets by Feng et al. in 2011. Feng et al. investigated relationships between a subset of initial universe of soft set and a soft set. Feng et al. defined the upper and lower approximations of a subset of initial universe over a soft set. In this study, we firstly define concept of soft class and soft class operations such as union, intersection, and complement. Then we give some properties of soft class operations. Based on definition and operations of soft classes, we define lower and upper approximations of a soft set. Subsequently, we introduce concept of soft rough class and investigate some properties of soft rough classes. Moreover, we give a novel decision making method based on soft class and present an example related to novel method.

  17. Intrinsic variability in shell and soft tissue growth of the freshwater mussel Lampsilis siliquoidea.

    Science.gov (United States)

    Larson, James H; Eckert, Nathan L; Bartsch, Michelle R

    2014-01-01

    Freshwater mussels are ecologically and economically important members of many aquatic ecosystems, but are globally among the most imperiled taxa. Propagation techniques for mussels have been developed and used to boost declining and restore extirpated populations. Here we use a cohort of propagated mussels to estimate the intrinsic variability in size and growth rate of Lampsilis siliquoidea (a commonly propagated species). Understanding the magnitude and pattern of variation in data is critical to determining whether effects observed in nature or experimental treatments are likely to be important. The coefficient of variation (CV) of L. siliquoidea soft tissues (6.0%) was less than the CV of linear shell dimensions (25.1-66.9%). Size-weight relationships were best when mussel width (the maximum left-right dimension with both valves appressed) was used as a predictor, but 95% credible intervals on these predictions for soft tissues were ∼145 mg wide (about 50% of the mean soft tissue mass). Mussels in this study were treated identically, raised from a single cohort and yet variation in soft tissue mass at a particular size class (as determined by shell dimensions) was still high. High variability in mussel size is often acknowledged, but seldom discussed in the context of mussel conservation. High variability will influence the survival of stocked juvenile cohorts, may affect the ability to experimentally detect sublethal stressors and may lead to incongruities between the effects that mussels have on structure (via hard shells) and biogeochemical cycles (via soft tissue metabolism). Given their imperiled status and longevity, there is often reluctance to destructively sample unionid mussel soft tissues even in metabolic studies (e.g., studies of nutrient cycling). High intrinsic variability suggests that using shell dimensions (particularly shell length) as a response variable in studies of sublethal stressors or metabolic processes will make confident

  18. The Destructive/Non-Destructive Identification of Enameled Pottery, Glass Artifacts and Associated Pigments—A Brief Overview

    Directory of Open Access Journals (Sweden)

    Philippe Colomban

    2013-07-01

    Full Text Available The birth of Chemistry can be found in two main practices: (i the Arts du feu (ceramic and glass, metallurgy, i.e., inorganic and solid state chemistry and (ii the preparation of remedies, alcohols and perfumes, dyes, i.e., organic and liquid state chemistry. After a brief survey of the history of (glazed pottery and (enameled glass artifacts, the development of destructive and non-destructive analytical techniques during the last few centuries is reviewed. Emphasis is put on mobile non-destructive Raman microspectroscopy of pigments and their glass/glaze host matrices for chronological/technological expertise. The techniques of white opacification, blue, yellow, green, red, and black coloring, are used as examples to point out the interest of pigments as chronological/technological markers.

  19. Soft Thermal Sensor with Mechanical Adaptability.

    Science.gov (United States)

    Yang, Hui; Qi, Dianpeng; Liu, Zhiyuan; Chandran, Bevita K; Wang, Ting; Yu, Jiancan; Chen, Xiaodong

    2016-11-01

    A soft thermal sensor with mechanical adaptability is fabricated by the combination of single-wall carbon nanotubes with carboxyl groups and self-healing polymers. This study demonstrates that this soft sensor has excellent thermal response and mechanical adaptability. It shows tremendous promise for improving the service life of soft artificial-intelligence robots and protecting thermally sensitive electronics from the risk of damage by high temperature. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Soft Interval-Valued Neutrosophic Rough Sets

    Directory of Open Access Journals (Sweden)

    Said Broumi

    2015-01-01

    Full Text Available In this paper, we first defined soft interval-valued neutrosophic rough sets(SIVN- rough sets for short which combines interval valued neutrosophic soft set and rough sets and studied some of its basic properties. This concept is an extension of soft interval valued intuitionistic fuzzy rough sets( SIVIF- rough sets. Finally an illustrative example is given to verify the developped algorithm and to demonstrate its practicality and effectiveness.

  1. Soft errors in modern electronic systems

    CERN Document Server

    Nicolaidis, Michael

    2010-01-01

    This book provides a comprehensive presentation of the most advanced research results and technological developments enabling understanding, qualifying and mitigating the soft errors effect in advanced electronics, including the fundamental physical mechanisms of radiation induced soft errors, the various steps that lead to a system failure, the modelling and simulation of soft error at various levels (including physical, electrical, netlist, event driven, RTL, and system level modelling and simulation), hardware fault injection, accelerated radiation testing and natural environment testing, s

  2. [Diagnosis of calcified deposits in soft tissues].

    Science.gov (United States)

    Wybier, M; Laredo, J D; Parlier, C; Champsaur, P

    1997-01-01

    Calcific deposit within soft tissues is frequently a clue for diagnosis. The radiological analysis of a calcific deposit within soft tissues includes the following aspects: the basic structure of the calcification, the grade of differentiation of the calcification, the site of the calcification, the number of calcific deposits, the shape of the calcification, the changes in the adjacent non-calcified soft tissues and in the adjacent bone, the course of the clinical signs, the course of the radiological abnormalities.

  3. Polyjet technology applications for rapid tooling

    Directory of Open Access Journals (Sweden)

    Udroiu Razvan

    2017-01-01

    Full Text Available Polymer Jetting (PolyJet has proved to be one of the most accurate additive manufacturing technologies, in order to manufacture rapid tools. Rapid Tooling (RT is different from conventional tooling as follow: manufacturing time is shorter, the cost is much less, but the tool life is shorter and tolerances are wider. The purpose of this paper is to make a comparative study between the soft tools (silicon moulds and hard tools (acrylic thermoplastic moulds based on the Polymer Jetting technology. Thus, two types of moulds have been made in order to manufacture a test part. Reaction injection moulding (RIM and casting techniques were used to fill these moulds with resins that simulate the plastic injection materials. Rapid tooling applications, such as indirect tooling and direct tooling, based on PolyJet technology were experimentally investigated.

  4. Soldering sheets using soft solders

    Directory of Open Access Journals (Sweden)

    Milan Brožek

    2013-01-01

    Full Text Available The paper contains strength tests results of joints soldered using lead and leadless soft solders. For tests lead solders types Pb60Sn40 and Sn60Pb40 and leadless soft solders types Sn95.5Ag3.8Cu0.7 and Sn96Ag4 were used. As basic materials steel sheet, zinc-coated steel sheet, copper sheet and brass sheet 100 x 20 x 1 mm was the test samples size. Always two sheets were cleaned and jointed together. For heating the propane-butane + air flame was used. Then the tested assemblies were loaded using the universal tensile-strength testing machine till to failure. At the tests the force needed for assemblies failure and failure type (in soldered joint, in basic material were recorded. From measured data the solder strength was calculated. From the experiment results it follows that from the point of view of the soldered joints strength as well of the solder strength relatively small differences were found. At the same time it is evident that the joint strength and solder strength depend on soldered material type and on soldered joint lapping length. On the basis of carried out experiments it can be stated that the substitution of lead solders by leadless solders is possible without risk of soldered joints strength decrease.

  5. Deformed soft matter under constraints

    Science.gov (United States)

    Bertrand, Martin

    In the last few decades, an increasing number of physicists specialized in soft matter, including polymers, have turned their attention to biologically relevant materials. The properties of various molecules and fibres, such as DNA, RNA, proteins, and filaments of all sorts, are studied to better understand their behaviours and functions. Self-assembled biological membranes, or lipid bilayers, are also the focus of much attention as many life processes depend on these. Small lipid bilayers vesicles dubbed liposomes are also frequently used in the pharmaceutical and cosmetic industries. In this thesis, work is presented on both the elastic properties of polymers and the response of lipid bilayer vesicles to extrusion in narrow-channels. These two areas of research may seem disconnected but they both concern deformed soft materials. The thesis contains four articles: the first presenting a fundamental study of the entropic elasticity of circular chains; the second, a simple universal description of the effect of sequence on the elasticity of linear polymers such as DNA; the third, a model of the symmetric thermophoretic stretch of a nano-confined polymer; the fourth, a model that predicts the final sizes of vesicles obtained by pressure extrusion. These articles are preceded by an extensive introduction that covers all of the essential concepts and theories necessary to understand the work that has been done.

  6. Non-invasive and Non-destructive Characterization of Tissue Engineered Constructs Using Ultrasound Imaging Technologies: A Review.

    Science.gov (United States)

    Kim, Kang; Wagner, William R

    2016-03-01

    With the rapid expansion of biomaterial development and coupled efforts to translate such advances toward the clinic, non-invasive and non-destructive imaging tools to evaluate implants in situ in a timely manner are critically needed. The required multi-level information is comprehensive, including structural, mechanical, and biological changes such as scaffold degradation, mechanical strength, cell infiltration, extracellular matrix formation and vascularization to name a few. With its inherent advantages of non-invasiveness and non-destructiveness, ultrasound imaging can be an ideal tool for both preclinical and clinical uses. In this review, currently available ultrasound imaging technologies that have been applied in vitro and in vivo for tissue engineering and regenerative medicine are discussed and some new emerging ultrasound technologies and multi-modality approaches utilizing ultrasound are introduced.

  7. Distributed Wind Soft Costs: A Beginning

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez, Tony; Forsyth,Trudy; Preus, Robert; Christol, Corrie; Orrell, Alice; Tegen, Suzanne

    2016-06-14

    Tony Jimenez presented this overview of distributed wind soft costs at the 2016 Small Wind Conference in Stevens Point, Wisconsin, on June 14, 2016. Soft costs are any non-hardware project costs, such as costs related to permitting fees, installer/developer profit, taxes, transaction costs, permitting, installation, indirect corporate costs, installation labor, and supply chain costs. This presentation provides an overview of soft costs, a distributed wind project taxonomy (of which soft costs are a subset), an alpha data set project demographics, data summary, and future work in this area.

  8. Soft Manipulators and Grippers: A Review

    Directory of Open Access Journals (Sweden)

    Josie Hughes

    2016-11-01

    Full Text Available Soft robotics is a growing area of research which utilises the compliance and adaptability of soft structures to develop highly adaptive robotics for soft interactions. One area in which soft robotics has the ability to make significant impact is in the development of soft grippers and manipulators. With an increased requirement for automation, robotics systems are required to perform task in unstructured and not well defined environments; conditions which conventional rigid robotics are not best suited. This requires a paradigm shift in the methods and materials used to develop robots such that they can adapt to and work safely in human environments. One solution to this is soft robotics, which enables soft interactions with the surroundings whilst maintaining the ability to apply significant force. This review paper assess the current materials and methods, actuation methods and sensors which are used in the development of soft manipulators. The achievements and shortcomings of recent technology in these key areas are evaluated, and this paper concludes with a discussion on the potential impacts of soft manipulators on industry and society.

  9. Empirical analysis of the types of destructiveness of law enforcement officers

    Directory of Open Access Journals (Sweden)

    Zlokazov K.V.

    2014-12-01

    Full Text Available The variety of existing scientific concepts of the problem of personality destructiveness is shown. The character of such general conclusions does not facilitate the cognition and prediction of destructive phenomena. The author proves the necessity to develop psychological theory of destructiveness which methodologically unites well-known but separate phenomena of psychological life of an individual. The fundamental propositions of this theory are argued: destructiveness is an active behaviour; it is aimed at perceived goal and formed on the basis of need perceived by an individual. The following features of destructiveness are distinguished: individual typological, regulatory, value characteristics of personality; peculiarities of person’s attitude to significant aspects of life – to the self, society and professional activity. The author proposes his own method of destructiveness diagnostics aimed at describing destructive and constructive components of social and professional activity of a person. Diagnostics indicators are the following: typological preconditions of destructiveness; features of regulation of activity and relations; value characteristics of individuals related to destructiveness. Indicators, describing the level of personal disadaptation, are provided. Personality destructiveness indicators of 211 law enforcement officers (93 % – males, mean age – 34 were analyzed, which allowed to group and describe psychological characteristics of 4 types of destructiveness. They are: socially alienated – 31 % of respondents, socially destructive – 29 %, asocially destructive – 23 %, asocially alienated – 17 %. This typology allows to generalize psychological preconditions of destructive and constructive behaviour of law enforcement officers. The author proposes further analyzing the provisions of conception of personality destructiveness.

  10. Imaging of Soft-Tissue Musculoskeletal Masses: Fundamental Concepts.

    Science.gov (United States)

    Kransdorf, Mark J; Murphey, Mark D

    2016-10-01

    Radiologic evaluation of musculoskeletal soft-tissue masses has changed dramatically with the continued improvements in imaging technology. The integration of advanced imaging has provided the radiologist with a wide range of assessment tools, but as with all powerful arsenals, selection and application of the appropriate imaging method can be problematic. Although the choices available for imaging evaluation of musculoskeletal masses have changed dramatically, the basic objectives of this assessment have remained constant: diagnosis and staging. The basic principles for evaluating musculoskeletal soft-tissue masses and achieving these objectives have not changed. This article addresses application of the current imaging methods to assessment of soft-tissue musculoskeletal masses, emphasizing fundamental concepts. We do not intend to provide a comprehensive review of imaging techniques, but rather to provide a useful review of the concepts needed to select the appropriate initial imaging method, magnetic resonance (MR) imaging field of view, MR imaging sequences, contrast material requirements, and rapid image acquisition techniques. We also address use of the new quantitative techniques of chemical shift and diffusion-weighted imaging. Finally, we review the current uses of computed tomography and ultrasonography. Although the choices available for imaging evaluation of musculoskeletal masses have changed dramatically within the past decade, appropriate application of the fundamental concepts of imaging will maximize the diagnostic utility of imaging examinations. ©RSNA, 2016.

  11. Ultrasonographic findings of the soft tissue lesions of the extremities

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jung Hee; Lee, Kun Won; Park, Cheol Min; Kim, Jung Hyuk; Chung, Kyoo Byung; Suh, Won Hyuck; Son, Won Young [Korea University College of Medicine, Seoul (Korea, Republic of)

    1989-02-15

    The ultrasonography is safe, rapid, and very effective method for evaluation of soft tissue lesions, especially by using high frequency transducer. The authors analyzed ultrasonographic findings of 49 cases of the soft tissue lesions of extremities which were proven clinically and surgically and/or pathologically in Korea University Hospital for recent 5 years. The result were as follows: 1. Of the 49 cases, 27 cases were male and 22 cases female. 2. Infectious conditions were 22 case, benign tumor 6 cases, malignant tumor 6 cases, and miscellaneous 15 cases. 3. The accurate diagnosis of nature of the lesions was possible in all cases except tuberculous tendinitis of Achilles tendon in infectious conditions (21/22), except neurilemmoma in benign tumors (5/6), except soft tissue synovial sarcoma and liposarcoma in malignant tumors (4/6), and all cases of miscellaneous conditions (15/15) with clinical symptom and plain X-ray film. 4. By using high frequency transducer for extremity lesions, we obtained precise location, size , shape, and internal structure of the lesions and guide for aspiration and/or biopsy.

  12. Destruction and Reallocation of Skills Following Large Company Exit

    DEFF Research Database (Denmark)

    Holm, Jacob Rubæk; Østergaard, Christian Richter; Roslyng Olesen, Thomas

    , skill destruction. This study is based on the closure of four shipyards in Denmark from 1987-2000. The analysis is based on detailed longitudinal micro data from a matched employer-employee dataset that allow us to follow the mobility of the laid-off employees in great detail. The analysis shows...

  13. NonDestructive Evaluation for Industrial & Development Applications

    Energy Technology Data Exchange (ETDEWEB)

    Hunter, James F. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-10-12

    Provide overview of weld inspection for Non-Destructive Testing at LANL. This includes radiography (RT/DR/CR/CT for x-ray & neutron sources), ultrasonic testing (UT/PAUT), dye penetrant inspection (PT), eddy current inspection (ET) and magnetic particle testing (MT). Facilities and capabilities for weld inspection will be summarized with examples.

  14. Non–destructive leaf area determination in African eggplant ...

    African Journals Online (AJOL)

    Leaf area models are simple, accurate and non-destructive. They are important in many experimental comparisons where leaf area meters are not available. No such model exists for African eggplant (Solanum macrocarpon). This study was, therefore, conducted to develop a leaf area model for S. macrocarpon using linear ...

  15. Textbook Coverage of the Destruction of the Armenians

    Science.gov (United States)

    Lindquist, David H.

    2012-01-01

    Despite its importance as the event establishing that the 20th century would be known as "the age of genocide," the destruction of the Armenians that occurred between the mid-1890s and 1923 is given marginal coverage in contemporary U. S. high school history textbooks. This article critiques that coverage and identifies the overall flow…

  16. Non-destructive sampling of ancient insect DNA

    DEFF Research Database (Denmark)

    Thomsen, Philip Francis; Elias, Scott; Gilbert, Tom

    2009-01-01

    BACKGROUND: A major challenge for ancient DNA (aDNA) studies on insect remains is that sampling procedures involve at least partial destruction of the specimens. A recent extraction protocol reveals the possibility of obtaining DNA from past insect remains without causing visual morphological dam...

  17. 9 CFR 50.7 - Destruction of animals.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Destruction of animals. 50.7 Section 50.7 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE COOPERATIVE CONTROL AND ERADICATION OF LIVESTOCK OR POULTRY DISEASES ANIMALS DESTROYED BECAUSE OF...

  18. 9 CFR 51.29 - Destruction of animals; time limit.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Destruction of animals; time limit. 51.29 Section 51.29 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE COOPERATIVE CONTROL AND ERADICATION OF LIVESTOCK OR POULTRY DISEASES ANIMALS DESTROYED...

  19. Online Preventative Non-Destructive Evaluation in Automated Fibre Placement

    NARCIS (Netherlands)

    Tonnaer, R.; Shroff, S.; Groves, R.M.

    2016-01-01

    The strict quality requirements for aerospace composite struc- tures give rise to costly quality control procedures. In automated bre placement (AFP) these procedures rely heavily on manual work and inspection. This research aims at performing preventative non-destructive evaluation of composite

  20. Responding to Destructive Interpersonal Interactions: A way forward ...

    African Journals Online (AJOL)

    This viewpoint paper focusses on the interpersonal problems that result in an unhealthy/unsafe school environment. Within the Southern African Development Community (SADC) region, the prevalence of domestic violence, child abuse, sexism, cultural intolerance and other destructive interpersonal interactions and ...

  1. Long-term use of medications and destructive periodontal disease.

    Science.gov (United States)

    Hujoel, Philippe P; Cunha-Cruz, Joana; Maupome, Gerardo; Saver, Barry

    2008-08-01

    Knowledge of typical medication use among patients with chronic periodontitis or destructive periodontal disease is limited. The aim of this study was to associate periodontitis severity with the use of different classes of medications. Patients (N=12,631) who had medical, dental, and pharmaceutical coverage with a health maintenance organization and whose severity of destructive periodontal disease was diagnosed by a dentist or specialist were included in the study. The rate of drug use over 7 years was related to the severity of destructive periodontal disease by means of Poisson regression models. Individuals with moderate to advanced periodontitis had significantly lower fill rates for the respiratory agents (antihistamines: -23%, 95% confidence interval [CI]: -10% to -34%; decongestants: -24%, 95% CI: -13% to -34%; and cough/cold medications: -12%, 95% CI: -3% to -21%) and anti-infective agents (antibiotics: -12%, 95% confidence interval: -6% to -18%; urinary anti-infectives: -36%, 95% CI: -6% to -56%; and topical antibiotics: -18%, 95% CI: -5% to -29%). More severe periodontitis was a marker for reduced medication use for allergies and infections. The associations between destructive periodontal disease, infections, allergies, and the hygiene hypothesis need further exploration.

  2. Periodontal tissue destruction caused by an elastic orthodontic ...

    African Journals Online (AJOL)

    Once this cooperation is lost, possible negative effects may be the consequence. Since the ... this case. Clinicians should be highly suspicious of any periodontal abnormality that arises when elastic orthodontic spacers are being used in the mouth. Key words: Open-flap curettage, Orthodontic spacer, Periodontal destruction ...

  3. Destructive Leadership Behaviors and Workplace Attitudes in Schools

    Science.gov (United States)

    Woestman, Daniel S.; Wasonga, Teresa Akinyi

    2015-01-01

    The study investigated destructive leadership behaviors (DLBs) and their influence on K-12 workplace attitudes (subordinate consideration for leaving their job, job satisfaction, and levels of stress). Quantitative survey method was used to gather data from experienced professional educators. Analyses of data show that the practice of DLB exists…

  4. Multifactorial aspects of antibody-mediated blood cell destruction

    NARCIS (Netherlands)

    Kapur, R.

    2014-01-01

    The research described in this thesis focuses on diseases of antibody-mediated blood cell destruction via FcγRs on phagocytes, in particular regarding platelets in fetal or neonatal alloimmune thrombocytopenia (FNAIT) and red blood cells (RBC) in hemolytic disease of the fetus and newborn (HDFN).

  5. 9 CFR 53.4 - Destruction of animals.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Destruction of animals. 53.4 Section 53.4 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF... animals. (a) Except as provided in paragraph (b) of this section, animals infected with or exposed to...

  6. Combating the Proliferation of Weapons of Mass Destruction.

    Science.gov (United States)

    Jenkins, Bonnie

    1997-01-01

    Reveals the growing threat posed to all countries by the proliferation of weapons of mass destruction. Discusses the international effort combating this proliferation including the Nuclear Non-Proliferation Treaty, Strategic Arms Reduction Treaties, Biological Weapons Convention, and Chemical Weapons Convention. Also considers regional arms…

  7. Microorganisms in processes of the destruction of oil in reservoirs

    Directory of Open Access Journals (Sweden)

    A. A. Kurapov

    2010-01-01

    Full Text Available Pollution by oil has negative influence on all ecosystem of the sea. The main role in decomposing of hydrocarbons belongs to microorganisms. Influence emulsion and water repellencies of cellular walls of microorganisms on an oil destruction is noted.

  8. Longitudinal Relations Between Constructive and Destructive Conflict and Couples’ Sleep

    Science.gov (United States)

    El-Sheikh, Mona; Koss, Kalsea J.; Kelly, Ryan J.; Rauer, Amy J.

    2016-01-01

    We examined longitudinal relations between interpartner constructive (negotiation) and destructive (psychological and physical aggression) conflict strategies and couples’ sleep over 1 year. Toward explicating processes of effects, we assessed the intervening role of internalizing symptoms in associations between conflict tactics and couples’ sleep. Participants were 135 cohabiting couples (M age = 37 years for women and 39 years for men). The sample included a large representation of couples exposed to economic adversity. Further, 68% were European American and the remainder were primarily African American. At Time 1 (T1), couples reported on their conflict and their mental health (depression, anxiety). At T1 and Time 2, sleep was examined objectively with actigraphs for 7 nights. Three sleep parameters were derived: efficiency, minutes, and latency. Actor–partner interdependence models indicated that husbands’ use of constructive conflict forecasted increases in their own sleep efficiency as well as their own and their wives’ sleep duration over time. Actor and partner effects emerged, and husbands’ and wives’ use of destructive conflict strategies generally predicted worsening of some sleep parameters over time. Several mediation and intervening effects were observed for destructive conflict strategies. Some of these relations reveal that destructive conflict is associated with internalizing symptoms, which in turn are associated with some sleep parameters longitudinally. These findings build on a small, albeit growing, literature linking sleep with marital functioning, and illustrate that consideration of relationship processes including constructive conflict holds promise for gaining a better understanding of factors that influence the sleep of men and women. PMID:25915089

  9. Optimizing the Treatment of Acute Duct-Destructive Pancreatitis

    Science.gov (United States)

    Zhakiev, Bazylbek S.; Karsakbayev, Uteugali G.; Kelimberdiev, Mersaid S.; ?uhamedgalieva, Bodagoz M.; K?nonenko, Aleksander F.

    2016-01-01

    The search for new methods for treating duct-destructive pancreatitis is a relevant problem. Endogenous intoxication and oxidative stress that accompany acute pancreatitis often progress even after surgery, which forces one to search for additional possibilities of preventing these severe consequences. This research studied the effect of small…

  10. Rituximab abrogates joint destruction in rheumatoid arthritis by inhibiting osteoclastogenesis

    NARCIS (Netherlands)

    Boumans, Maria J. H.; Thurlings, Rogier M.; Yeo, Lorraine; Scheel-Toellner, Dagmar; Vos, Koen; Gerlag, Danielle M.; Tak, Paul P.

    2012-01-01

    Objectives To examine how rituximab may result in the inhibition of joint destruction in rheumatoid arthritis (RA) patients. Methods Twenty-eight patients with active RA were treated with rituximab. Radiographs of hands and feet before and 1 year after therapy were assessed using the Sharp-van der

  11. Is Group Decision Making in the Classroom Constructive or Destructive?

    Science.gov (United States)

    King, Rhonda; King, John

    1998-01-01

    Reports on a study that focused on Australian students' cognitive and social skills in group decision-making activities conducted in the classroom. Finds that students were motivated to participate in group decision-making and that students' decision-making strategies are destructive when students assert their own ideas at the expense of others.…

  12. 9 CFR 51.25 - Proof of destruction.

    Science.gov (United States)

    2010-01-01

    ...) consigning the animal from a farm or livestock market directly to a slaughter establishment; or (f) In unique... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Proof of destruction. 51.25 Section 51.25 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE...

  13. Destructive behavior in a Fragile Public Good game

    NARCIS (Netherlands)

    Hoyer, M.; Bault, N.; Loerakker, B.; van Winden, F.

    2014-01-01

    Socially destructive behavior in a public good environment-like damaging public goods-is an underexposed phenomenon in economics. In an experiment we investigate whether such behavior can be influenced by the very nature of an environment. To that purpose we use a Fragile Public Good (FPG) game

  14. Destructive Behavior in a Fragile Public Good Game

    NARCIS (Netherlands)

    Hoyer, M.; Bault, N.; Loerakker, B.; van Winden, F.

    2013-01-01

    Socially destructive behavior in a public good environment - like damaging public goods - is an underexposed phenomenon in economics. In an experiment we investigate whether such behavior can be influenced by the very nature of an environment. To that purpose we use a Fragile Public Good (FPG) game

  15. Should erythrocyte destruction in vivo be through phagocytosis alone?

    Indian Academy of Sciences (India)

    did not lower their EDA, strongly suggesting the involvement of non-phagocytic mechanisms in erythrocyte destruction. Assessment of erythrocyte lysis by the chromium release assay of cytotoxicity also provided direct evidence of erythrocyte lysis by leukocytes. T cells appear to be indirectly involved in. EDA associated with.

  16. Kinetics of cyanogen chloride destruction by chemical reduction methods.

    Science.gov (United States)

    Shang, Chii; Qi, Yinan; Xie, Li; Liu, Wei; Yang, Xin

    2005-05-01

    In this study, membrane introduction mass spectrometry (MIMS) was applied to evaluate the kinetics of cyanogen chloride (ClCN) destruction by chemical reduction methods, using thiosulfate, sulfite, metabisulfite, ferrous ions and zero-valent iron at various concentrations and pH. The ClCN destruction followed second-order reaction kinetics in all cases of using sulfur compounds, though the second-order rate constants varied substantially from approximately 0.3-25.7 M(-1)s(-1) under different experimental conditions. The destruction of ClCN was primarily attributable to the chemical reduction pathway. Hydroxide-assisted ClCN hydrolysis was only significant at pH 9 and also when the observed reduction rate was relatively slow. The second-order rate constants achieved by sulfur(IV) compounds in the form of sulfite were found to be higher than those obtained with thiosulfate and S(IV) compounds in the form of bisulfite. Ferrous ions and zero-valent iron demonstrated slow or no ClCN reduction up to dosages of 1000 mgL(-1) and 100 gL(-1), respectively. These findings suggest that applying moderately high dosages of S(IV) compounds under neutral or alkali conditions with sufficient contact time is required for wastewater ClCN destruction. In addition, ClCN losses during long-term preservation with excess reducing sulfur compounds prior to analysis can be substantial and should be avoided.

  17. Destruction of mangrove vegetation by Sphaeroma terebrans along Kerala coast

    Digital Repository Service at National Institute of Oceanography (India)

    Santhakumari, V.

    the level of mean high water. Those prop roots that remained were perforated and exhibited all stages of destruction accompaniEd. by secondary decomposition due to the attack of bacteria and fungi. Numerous individuals, both juveniles and adults of S...

  18. 19 CFR 191.37 - Destruction under Customs supervision.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 2 2010-04-01 2010-04-01 false Destruction under Customs supervision. 191.37 Section 191.37 Customs Duties U.S. CUSTOMS AND BORDER PROTECTION, DEPARTMENT OF HOMELAND SECURITY... Customs supervision. A claimant may destroy merchandise and obtain unused merchandise drawback by...

  19. ADSORPTION AND CATALYTIC DESTRUCTION OF TRICHLOROETHYLENE IN HYDROPHOBIC ZEOLITES

    Science.gov (United States)

    Several chromium exchanged ZSM-5 zeolites of varying SiO2/Al2O3 ratio were prepared and investigated for ambient (23 ?C) adsorption and subsequent oxidative destruction (250-400 ?C) of gaseous trichloroethylene (TCE, Cl2C=CHCl) in a humid air stream. With an increase in the SiO2...

  20. The Woman Writer and the Element of Destruction

    Science.gov (United States)

    Killoh, Ellen Peck

    1972-01-01

    Using Anais Nin as an example, the author describes the problem of the female writer as an agent of destruction. She is angered over the fact that women writers misdirected so much of their creative energy through fear of adopting any but the submissive, passive, feminine role. (Author/NL)

  1. Childhood Sexual Abuse, Dissociation, and Adult Self-Destructive Behavior.

    Science.gov (United States)

    Rodriguez-Srednicki, Ofelia

    2001-01-01

    Female college students reporting a history of childhood sexual abuse and not reporting a history of childhood sexual abuse were compared on indices of six self-destructive behaviors, including drug use, alcohol abuse, binge eating, self-mutilation, risky sex, and suicidality. The CSA group had significantly higher mean scores on all the indices…

  2. Impact of destruction – Introduction to the Josephus Seminar ...

    African Journals Online (AJOL)

    ... of the Temple' held at the Theological University in Kampen, the Netherlands. The introduction sketches the status quaestionis and the methodological issues in comparing the works of Josephus and the Gospels in reconstructing the impact of the destruction of the Temple in AD 70 on Judaism and Early Christianity.

  3. 7 CFR 160.9 - Destructively distilled wood turpentine.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 3 2010-01-01 2010-01-01 false Destructively distilled wood turpentine. 160.9 Section 160.9 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) NAVAL STORES REGULATIONS AND STANDARDS FOR NAVAL STORES...

  4. Neural network and principal component regression in non-destructive soluble solids content assessment: a comparison.

    Science.gov (United States)

    Chia, Kim-seng; Abdul Rahim, Herlina; Abdul Rahim, Ruzairi

    2012-02-01

    Visible and near infrared spectroscopy is a non-destructive, green, and rapid technology that can be utilized to estimate the components of interest without conditioning it, as compared with classical analytical methods. The objective of this paper is to compare the performance of artificial neural network (ANN) (a nonlinear model) and principal component regression (PCR) (a linear model) based on visible and shortwave near infrared (VIS-SWNIR) (400-1000 nm) spectra in the non-destructive soluble solids content measurement of an apple. First, we used multiplicative scattering correction to pre-process the spectral data. Second, PCR was applied to estimate the optimal number of input variables. Third, the input variables with an optimal amount were used as the inputs of both multiple linear regression and ANN models. The initial weights and the number of hidden neurons were adjusted to optimize the performance of ANN. Findings suggest that the predictive performance of ANN with two hidden neurons outperforms that of PCR.

  5. Neural network and principal component regression in non-destructive soluble solids content assessment: a comparison*

    Science.gov (United States)

    Chia, Kim-seng; Abdul Rahim, Herlina; Abdul Rahim, Ruzairi

    2012-01-01

    Visible and near infrared spectroscopy is a non-destructive, green, and rapid technology that can be utilized to estimate the components of interest without conditioning it, as compared with classical analytical methods. The objective of this paper is to compare the performance of artificial neural network (ANN) (a nonlinear model) and principal component regression (PCR) (a linear model) based on visible and shortwave near infrared (VIS-SWNIR) (400–1000 nm) spectra in the non-destructive soluble solids content measurement of an apple. First, we used multiplicative scattering correction to pre-process the spectral data. Second, PCR was applied to estimate the optimal number of input variables. Third, the input variables with an optimal amount were used as the inputs of both multiple linear regression and ANN models. The initial weights and the number of hidden neurons were adjusted to optimize the performance of ANN. Findings suggest that the predictive performance of ANN with two hidden neurons outperforms that of PCR. PMID:22302428

  6. Cranium metastasis of a squamous cell carcinoma with extensive bone destruction

    Directory of Open Access Journals (Sweden)

    Cahit Kural

    2011-12-01

    Full Text Available The musculoskeletal metastasis of the lung cancers is rare and locates usually at the spine, pelvis and femur. The cranial metastasis of lung cancer is very rare and generally in small size. Large bone destruction is not reported yet. Fifty six years old male patient was admitted to our hospital with the complaints of cough and respiratory difficulty. The needle biopsy of the lung revealed the diagnosis of squamous cell lung carcinoma (Grade 4 and the patient underwent palliative radiotherapy. The patient was admitted to our hospital 6 month later with rapidly growing mass lesion on the forehead. The radiological examination showed an extraaxial mass lesion 10x9x8 cm in size, which compressed on the brain tissue and caused large destruction in the frontal bone. The mass lesion was removed surgically, the brain tissue was decompressed and the bone defect was repaired with synthetic material. Although similar cases were reported previously, a lung carcinoma, which caused bone defect in this size, was not reported. For such metastases, removal of the mass lesion and cranioplasty are suggested.

  7. Destruction of chemical warfare surrogates using a portable atmospheric pressure plasma jet

    Science.gov (United States)

    Škoro, Nikola; Puač, Nevena; Živković, Suzana; Krstić-Milošević, Dijana; Cvelbar, Uroš; Malović, Gordana; Petrović, Zoran Lj.

    2018-01-01

    Today's reality is connected with mitigation of threats from the new chemical and biological warfare agents. A novel investigation of cold plasmas in contact with liquids presented in this paper demonstrated that the chemically reactive environment produced by atmospheric pressure plasma jet (APPJ) is potentially capable of rapid destruction of chemical warfare agents in a broad spectrum. The decontamination of three different chemical warfare agent surrogates dissolved in liquid is investigated by using an easily transportable APPJ. The jet is powered by a kHz signal source connected to a low-voltage DC source and with He as working gas. The detailed investigation of electrical properties is performed for various plasmas at different distances from the sample. The measurements of plasma properties in situ are supported by the optical spectrometry measurements, whereas the high performance liquid chromatography measurements before and after the treatment of aqueous solutions of Malathion, Fenitrothion and Dimethyl Methylphosphonate. These solutions are used to evaluate destruction and its efficiency for specific neural agent simulants. The particular removal rates are found to be from 56% up to 96% during 10 min treatment. The data obtained provide basis to evaluate APPJ's efficiency at different operating conditions. The presented results are promising and could be improved with different operating conditions and optimization of the decontamination process.

  8. Non-destructive morphological observations of the fleshy brittle star, Asteronyx loveni using micro-computed tomography (Echinodermata, Ophiuroidea, Euryalida

    Directory of Open Access Journals (Sweden)

    Massanori Okanishi

    2017-03-01

    Full Text Available The first morphological observation of a euryalid brittle star, Asteronyx loveni, using non-destructive X-ray micro-computed tomography (µCT was performed. The body of euryalids is covered by thick skin, and it is very difficult to observe the ossicles without dissolving the skin. Computed tomography with micrometer resolution (approximately 4.5–15.4 µm was used to construct 3D images of skeletal ossicles and soft tissues in the ophiuroid’s body. Shape and positional arrangement of taxonomically important ossicles were clearly observed without any damage to the body. Detailed pathways inside the vertebral ossicles, lateral arm plates, and arm spines for passage of nerves and water vascular structures were observed. Inter-vertebral muscles were also observed. Forms and 3D arrangements of many important taxonomical characters of the euryalids were scrutinized by µCT in high enough resolution for taxonomic description of ophiuroids.

  9. PEROXIDE DESTRUCTION TESTING FOR THE 200 AREA EFFLUENT TREATMENT FACILITY

    Energy Technology Data Exchange (ETDEWEB)

    HALGREN DL

    2010-03-12

    The hydrogen peroxide decomposer columns at the 200 Area Effluent Treatment Facility (ETF) have been taken out of service due to ongoing problems with particulate fines and poor destruction performance from the granular activated carbon (GAC) used in the columns. An alternative search was initiated and led to bench scale testing and then pilot scale testing. Based on the bench scale testing three manganese dioxide based catalysts were evaluated in the peroxide destruction pilot column installed at the 300 Area Treated Effluent Disposal Facility. The ten inch diameter, nine foot tall, clear polyvinyl chloride (PVC) column allowed for the same six foot catalyst bed depth as is in the existing ETF system. The flow rate to the column was controlled to evaluate the performance at the same superficial velocity (gpm/ft{sup 2}) as the full scale design flow and normal process flow. Each catalyst was evaluated on peroxide destruction performance and particulate fines capacity and carryover. Peroxide destruction was measured by hydrogen peroxide concentration analysis of samples taken before and after the column. The presence of fines in the column headspace and the discharge from carryover was generally assessed by visual observation. All three catalysts met the peroxide destruction criteria by achieving hydrogen peroxide discharge concentrations of less than 0.5 mg/L at the design flow with inlet peroxide concentrations greater than 100 mg/L. The Sud-Chemie T-2525 catalyst was markedly better in the minimization of fines and particle carryover. It is anticipated the T-2525 can be installed as a direct replacement for the GAC in the peroxide decomposer columns. Based on the results of the peroxide method development work the recommendation is to purchase the T-2525 catalyst and initially load one of the ETF decomposer columns for full scale testing.

  10. Indirect Self-Destructiveness in Women who Experience Domestic Violence.

    Science.gov (United States)

    Tsirigotis, Konstantinos; Łuczak, Joanna

    2018-01-02

    Lives of people experiencing domestic or/and intimate partner violence abound in many unpleasant events and physical and psychological suffering, which affects their psychosocial functioning. The aim of this study was to explore indirect self-destructiveness as a generalised behavioural tendency and its manifestations in women experiencing domestic violence. The "Chronic Self-Destructiveness Scale" (CS-DS) was used to study two groups of women: 52 women aged 30-65 years (mean age: 40.15) using assistance of the Crisis Intervention Centre due to experienced domestic violence (V group) and 150 well-matched women not experiencing domestic violence (NV group). Women suffering domestic violence (V) obtained significantly higher scores than women not experiencing domestic violence (NV) for both the general index and a majority of CS-DS subscales; it was only for the A1 (Transgression and Risk) subscale that they achieved somewhat lower scores. Correlation coefficients between particular CS-DS subscales in the V group were higher than in the NV group; there were also certain differences in coefficients between the groups. Subscale factor analysis results were different too: only one factor was isolated in the V group while two were distinguished in the NV group. It can be inferred from the results that the intensity of indirect self-destructiveness as a generalised behavioural tendency as well as of most its categories was higher in women experiencing domestic violence. Tendencies and categories of indirectly self-destructive behaviours in women suffering domestic violence were more closely connected with one another, and the internal coherence of indirect self-destructiveness in those women might also be higher.

  11. A life cycle assessment of destruction of ammunition

    Energy Technology Data Exchange (ETDEWEB)

    Alverbro, K., E-mail: karin.alverbro@infra.kth.se [Division of Environmental Strategies Research - fms, Department of Urban Planning and Environment, School of Architecture and the Built Environment, KTH (Royal Institute of Technology), SE-100 44 Stockholm (Sweden); Bjoerklund, A., E-mail: annab@infra.kth.se [Division of Environmental Strategies Research - fms, Department of Urban Planning and Environment, School of Architecture and the Built Environment, KTH (Royal Institute of Technology), SE-100 44 Stockholm (Sweden); Finnveden, G., E-mail: goran.finnveden@infra.kth.se [Division of Environmental Strategies Research - fms, Department of Urban Planning and Environment, School of Architecture and the Built Environment, KTH (Royal Institute of Technology), SE-100 44 Stockholm (Sweden); Hochschorner, E., E-mail: eho@infra.kth.se [Division of Environmental Strategies Research - fms, Department of Urban Planning and Environment, School of Architecture and the Built Environment, KTH (Royal Institute of Technology), SE-100 44 Stockholm (Sweden); Haegvall, J., E-mail: joakim.hagvall@foi.se [FOI, Swedish Defence Research Agency, SE-164 90 Stockholm (Sweden)

    2009-10-30

    The Swedish Armed Forces have large stocks of ammunition that were produced at a time when decommissioning was not considered. This ammunition will eventually become obsolete and must be destroyed, preferably with minimal impact on the environment and in a safe way for personnel. The aim of this paper is to make a comparison of the environmental impacts in a life cycle perspective of three different methods of decommissioning/destruction of ammunition, and to identify the environmental advantages and disadvantages of each of these destruction methods: open detonation; static kiln incineration with air pollution control combined with metal recycling, and a combination of incineration with air pollution control, open burning, recovery of some energetic material and metal recycling. Data used are for the specific processes and from established LCA databases. Recycling the materials in the ammunition and minimising the spread of airborne pollutants during incineration were found to be the most important factors affecting the life cycle environmental performance of the compared destruction methods. Open detonation with or without metal recycling proved to be the overall worst alternative from a life cycle perspective. The results for the static kiln and combination treatment indicate that the kind of ammunition and location of the destruction plant might determine the choice of method, since the environmental impacts from these methods are of little difference in the case of this specific grenade. Different methods for destruction of ammunition have previously been discussed from a risk and safety perspective. This is however to our knowledge the first study looking specifically on environmentally aspect in a life cycle perspective.

  12. Cyclic Soft Groups and Their Applications on Groups

    Directory of Open Access Journals (Sweden)

    Hacı Aktaş

    2014-01-01

    Full Text Available In crisp environment the notions of order of group and cyclic group are well known due to many applications. In this paper, we introduce order of the soft groups, power of the soft sets, power of the soft groups, and cyclic soft group on a group. We also investigate the relationship between cyclic soft groups and classical groups.

  13. Ombitasvir, paritaprevir, ritonavir, dasabuvir and ribavirin in cirrhosis after complete destruction of hepatocellular carcinoma.

    Science.gov (United States)

    Krastev, Zahariy; Jelev, Deian; Antonov, Krasimir; Petkova, Tanya; Atanasova, Evelina; Zheleva, Nadezhda; Tomov, Bojidar; Boyanova, Yana; Mateva, Lyudmila

    2016-02-28

    We observed a sustained viral response (SVR) of ombitasvir/paritaprevir/ritonavir, dasabuvir and ribavirin therapy, for 12 wk, in two cases with compensated liver cirrhosis and fully destroyed early hepatocellular carcinoma (HCC). Patients were infected with hepatitis C virus (HCV) genotype 1b and were previous null responders/relapsers to interferon-alpha/ribavirin (IFN/RBV). There was a rapid suppression of HCV RNA to undetectable levels within the first two treatment weeks. SVR was achieved even after marked reduction of the RBV dose. The treatment was well tolerated. Both subjects experienced worsening of liver disease during therapy, in different patterns: severe, transient, predominantly direct hyperbilirubinemia without cytolysis (case 1) or progressive increase of aminotransferases (grade 4) without severe hyperbilirubinemia (case 2). Adverse events spontaneously resolved. The patients remained in a good clinical condition without hepatic decompensation. There was no re-occurrence of HCC. This is the first report for treatment of HCV cirrhosis after complete HCC destruction.

  14. Usage of FTIR-ATR as Non-Destructive Analysis of Selected Toxic Dyes

    Science.gov (United States)

    Bartošová, Alica; Blinová, Lenka; Sirotiak, Maroš; Michalíková, Anna

    2017-06-01

    The degradation of the environment which is due to the discharge of polluting wastewater from industrial sources poses a real problem in several countries. Textile industries use large volumes of water in their operations, discharging thus large volume of wastewater into the environment, most of which is untreated. The wastewater contains a variety of chemicals from various stages of process operations, including desizing, scouring, bleaching and dyeing. The main purpose of this paper is to introduce Infrared Spectrometry with Fourier transformation as a non-destructive method for study, identifation and rapid determination of selected representatives of cationic (Methylene Blue), azo (Congo Red, Eriochrome Black T) and nitroso (Naphthol Green B) dyes. In conjunction with the ATR technique, FTIR offers a reliable detection method of dyes without extraction by other dangerous substances. Spectral interpretation of dye spectra revealed valuable information about the identification and characterization of each group of dyes.

  15. Quantification of nanoparticle concentration in colloidal suspensions by a non-destructive optical method

    Science.gov (United States)

    Clement, Sandhya; Gardner, Brint; Razali, Wan Aizuddin W.; Coleman, Victoria A.; Jämting, Åsa K.; Catchpoole, Heather J.; Goldys, Ewa M.; Herrmann, Jan; Zvyagin, Andrei

    2017-11-01

    The estimation of nanoparticle number concentration in colloidal suspensions is a prerequisite in many procedures, and in particular in multi-stage, low-yield reactions. Here, we describe a rapid, non-destructive method based on optical extinction and dynamic light scattering (DLS), which combines measurements using common bench-top instrumentation with a numerical algorithm to calculate the particle size distribution (PSD) and concentration. These quantities were derived from Mie theory applied to measurements of the optical extinction spectrum of homogeneous, non-absorbing nanoparticles, and the relative PSD of a colloidal suspension. The work presents an approach to account for PSDs achieved by DLS which, due to the underlying model, may not be representative of the true sample PSD. The presented approach estimates the absolute particle number concentration of samples with mono-, bi-modal and broad size distributions with <50% precision. This provides a convenient and practical solution for number concentration estimation required during many applications of colloidal nanomaterials.

  16. Chemodetection and Destruction of Host Urea Allows Helicobacter pylori to Locate the Epithelium

    Science.gov (United States)

    Huang, Julie Y.; Sweeney, Emily Goers; Sigal, Michael; Zhang, Hai C.; Remington, S. James; Cantrell, Michael A.; Kuo, Calvin J.; Guillemin, Karen; Amieva, Manuel R.

    2015-01-01

    SUMMARY The gastric pathogen Helicobacter pylori interacts intimately with the gastric mucosa to avoid the microbicidal acid in the stomach lumen. The cues H. pylori senses to locate and colonize the gastric epithelium have not been well defined. We show that metabolites emanating from human gastric organoids rapidly attract H. pylori. This response is largely controlled by the bacterial chemoreceptor TlpB, and the main attractant emanating from epithelia is urea. Our previous structural analyses show that TlpB binds urea with high affinity. Here we demonstrate that this tight binding controls highly sensitive responses, allowing detection of urea concentrations as low as 50 nanomolar. Attraction to urea requires that H. pylori urease simultaneously destroys the signal. We propose that H. pylori has evolved a sensitive urea chemodetection and destruction system that allows the bacterium to dynamically and locally modify the host environment to locate the epithelium. PMID:26269952

  17. Fluctuation in visual acuity during soft toric contact lens wear.

    Science.gov (United States)

    Chamberlain, Paul; Morgan, Philip B; Moody, Kurt J; Maldonado-Codina, Carole

    2011-04-01

    To quantify changes in visual acuity (VA) with soft toric contact lenses as a result of lens movement and/or rotational instability caused by versional eye movements. A novel chart for vision assessment at near (40 cm) for soft toric contact lenses (VANT chart),consisting of a central, color-coded logMAR panel and eight peripheral letter targets set on a white background measuring 60 × 40 cm was constructed. In the developmental phase of the work, 10 subjects (20 eyes) wore 2 toric lenses in random order, and the impact of rapid and delayed eye versions in 8 directions of gaze on VANT acuity was investigated. In phase 2, 35 subjects (68 eyes) wore 4 toric lenses in random order, and a streamlined clinical protocol using the VANT chart was implemented. Standard assessments of toric lens fit and distance VA were also performed. Testing in the first phase showed no difference for change in VA for rapid vs. delayed version movements, (p = 0.17) but acuity reduction was greater for diagonal compared with horizontal/vertical versions (p = 0.06). As such, testing in phase 2 proceeded using rapid, diagonal versions only. In this second phase, there were differences for low-contrast distance VA measures between lens types (p = 0.02) and for both VANT baseline acuity (p = 0.03) and postversion acuity (p = 0.04), but no differences were found between lenses for magnitude of vision loss (p = 0.91), which was about one line. No relationship was established between the magnitude of vision loss and measured rotational stability (p = 0.75). This work has demonstrated that conventional approaches to measuring VA do not fully replicate the "real world" experience of soft toric lens wearers. The VANT chart has shown that VA is reduced immediately after versional eye movements and suggests that more dynamic methods of assessing visual performance should be considered for soft toric contact lens wearers, especially given the apparent inability of lens stability measurements to predict

  18. An Investigation into PAH Destruction in Nearby Supernova Remnants, North Polar Spur and Cygnus Loop

    Science.gov (United States)

    Burkhart, Sarah M.; Witt, Adolf N.

    2015-01-01

    Our goal in conducting this research was to look at the polycyclic aromatic hydrocarbon (PAH)/large dust grain emission intensity ratio in nearby supernova remnants to find evidence for selective PAH destruction by hot gas and high velocity shock waves within these regions, as predicted by the models of Arendt et al. (2010) and Micelotta et al. (2010a,b). Two supernova remnants were studied- the North Polar Spur (NPS) and the Cygnus Loop. The data for PAHs were obtained from the WISE W3 12 micron all-sky map processed by Meisner & Finkbeiner (2014), and the data for the larger grains come from the IRAS 100 micron all-sky map processed by Schlegel, Finkbeiner & Davis (1998). After obtaining a control PAH/large grain intensity ratio of ~2.8 (DN/px)/(MJy/sr) from two high latitude clouds, MBM 30 and MBM 32, we found that the intensity ratios across the NPS and Cygnus Loop were not far off- ~2.7 (DN/px)/(MJy/sr) and ~3.1 (DN/px)/(MJy/sr), respectively- showing no evidence of selective large-scale PAH destruction in supernova remnants. The individual intensities for both PAHs and large grains do decrease inside the Cygnus Loop, however, suggesting a decrease in abundances of both grain types, which could mean total dust grain destruction with the normal ratios coming from foreground and background dust located in the line of sight of the remnant. In addition, temperature and E(B-V) measurements taken from calibrated IRAS images show that while the dust column density increases in the Eastern Veil of the Cygnus Loop, the dust temperature reaches a local maximum, indicating the heating of large grains by interaction with the hot gas in the remnant. The PAH/large grain ratio in the Eastern Veil does decrease and could be indicative of currently ongoing active grain destruction there, with the PAHs being destroyed on a more rapid timescale than the large grains.We are grateful for financial support from the NSF REU Program grant to the Department of Physics & Astronomy at

  19. An optimized non-destructive protocol for testing mechanical properties in decellularized rabbit trachea.

    Science.gov (United States)

    Den Hondt, M; Vanaudenaerde, B M; Maughan, E F; Butler, C R; Crowley, C; Verbeken, E K; Verleden, S E; Vranckx, J J

    2017-09-15

    Successful tissue-engineered tracheal transplantation relies on the use of non-immunogenic constructs, which can vascularize rapidly, support epithelial growth, and retain mechanical properties to that of native trachea. Current strategies to assess mechanical properties fail to evaluate the trachea to its physiological limits, and lead to irreversible destruction of the construct. Our aim was to develop and evaluate a novel non-destructive method for biomechanical testing of tracheae in a rabbit decellularization model. To validate the performance of this method, we simultaneously analyzed quantitative and qualitative graft changes in response to decellularization, as well as in vivo biocompatibility of implanted scaffolds. Rabbit tracheae underwent two, four and eight cycles of detergent-enzymatic decellularization. Biomechanical properties were analyzed by calculating luminal volume of progressively inflated and deflated tracheae with microCT. DNA, glycosaminoglycan and collagen contents were compared to native trachea. Scaffolds were prelaminated in vivo. Native, two- and four-cycle tracheae showed equal mechanical properties. Collapsibility of eight-cycle tracheae was significantly increased from -40cm H2O (-3.9kPa). Implantation of two- and four-cycle decellularized scaffolds resulted in favorable flap-ingrowth; eight-cycle tracheae showed inadequate integration. We showed a more limited detergent-enzymatic decellularization successfully removing non-cartilaginous immunogenic matter without compromising extracellular matrix content or mechanical stability. With progressive cycles of decellularization, important loss of functional integrity was detected upon mechanical testing and in vivo implantation. This instability was not revealed by conventional quantitative nor qualitative architectural analyses. These experiments suggest that non-destructive, functional evaluation, e.g. by microCT, may serve as an important tool for mechanical screening of scaffolds

  20. Rehabilitative Soft Exoskeleton for Rodents.

    Science.gov (United States)

    Florez, Juan Manuel; Shah, Manan; Moraud, Eduardo Martin; Wurth, Sophie; Baud, Laetitia; Von Zitzewitz, Joachim; van den Brand, Rubia; Micera, Silvestro; Courtine, Gregoire; Paik, Jamie

    2017-02-01

    Robotic exoskeletons provide programmable, consistent and controllable active therapeutic assistance to patients with neurological disorders. Here we introduce a prototype and preliminary experimental evaluation of a rehabilitative gait exoskeleton that enables compliant yet effective manipulation of the fragile limbs of rats. To assist the displacements of the lower limbs without impeding natural gait movements, we designed and fabricated soft pneumatic actuators (SPAs). The exoskeleton integrates two customizable SPAs that are attached to a limb. This configuration enables a 1 N force load, a range of motion exceeding 80 mm in the major axis, and speed of actuation reaching two gait cycles/s. Preliminary experiments in rats with spinal cord injury validated the basic features of the exoskeleton. We propose strategies to improve the performance of the robot and discuss the potential of SPAs for the design of other wearable interfaces.

  1. Soft x-ray excitonics

    Science.gov (United States)

    Moulet, A.; Bertrand, J. B.; Klostermann, T.; Guggenmos, A.; Karpowicz, N.; Goulielmakis, E.

    2017-09-01

    The dynamic response of excitons in solids is central to modern condensed-phase physics, material sciences, and photonic technologies. However, study and control have hitherto been limited to photon energies lower than the fundamental band gap. Here we report application of attosecond soft x-ray and attosecond optical pulses to study the dynamics of core-excitons at the L2,3 edge of Si in silicon dioxide (SiO2). This attosecond x-ray absorption near-edge spectroscopy (AXANES) technique enables direct probing of the excitons’ quasiparticle character, tracking of their subfemtosecond relaxation, the measurement of excitonic polarizability, and observation of dark core-excitonic states. Direct measurement and control of core-excitons in solids lay the foundation of x-ray excitonics.

  2. Thin films of soft matter

    CERN Document Server

    Kalliadasis, Serafim

    2007-01-01

    A detailed overview and comprehensive analysis of the main theoretical and experimental advances on free surface thin film and jet flows of soft matter is given. At the theoretical front the book outlines the basic equations and boundary conditions and the derivation of low-dimensional models for the evolution of the free surface. Such models include long-wave expansions and equations of the boundary layer type and are analyzed via linear stability analysis, weakly nonlinear theories and strongly nonlinear analysis including construction of stationary periodic and solitary wave and similarity solutions. At the experimental front a variety of very recent experimental developments is outlined and the link between theory and experiments is illustrated. Such experiments include spreading drops and bubbles, imbibitions, singularity formation at interfaces and experimental characterization of thin films using atomic force microscopy, ellipsometry and contact angle measurements and analysis of patterns using Minkows...

  3. Soft tissue aneurysmal bone cyst

    Energy Technology Data Exchange (ETDEWEB)

    Wang, X.L.; Gielen, J.L.; Delrue, F.; De Schepper, A.M.A. [Department of Radiology, Universitair Ziekenhuis Antwerpen (University of Antwerp), Wilrijkstraat 10, 2650, Edegem (Belgium); Salgado, R. [Department of Pathology, Universitair Ziekenhuis Antwerpen (University of Antwerp), Wilrijkstraat 10, 2650, Edegem (Belgium)

    2004-08-01

    A soft tissue aneurysmal bone cyst located in the right gluteus medius of a 21-year-old man is reported. On conventional radiography, the lesion demonstrated a spherically trabeculated mass with a calcific rim. On CT scan, it showed a well-organized peripheral calcification resembling a myositis ossificans. On MRI, it presented as a multilocular, cystic lesion with fluid-fluid levels. The lesion had no solid components except for intralesional septa. Although findings on imaging and histology were identical to those described in classical aneurysmal bone cyst, diagnosis was delayed because of lack of knowledge of this entity and its resemblance to the more familiar post-traumatic heterotopic ossification (myositis ossificans). (orig.)

  4. Why mercury prefers soft ligands

    Energy Technology Data Exchange (ETDEWEB)

    Riccardi, Demian M [ORNL; Guo, Hao-Bo [ORNL; Gu, Baohua [ORNL; Parks, Jerry M [ORNL; Summers, Anne [University of Georgia, Athens, GA; Miller, S [University of California, San Francisco; Liang, Liyuan [ORNL; Smith, Jeremy C [ORNL

    2013-01-01

    Mercury (Hg) is a major global pollutant arising from both natural and anthropogenic sources. Defining the factors that determine the relative affinities of different ligands for the mercuric ion, Hg2+, is critical to understanding its speciation, transformation, and bioaccumulation in the environment. Here, we use quantum chemistry to dissect the relative binding free energies for a series of inorganic anion complexes of Hg2+. Comparison of Hg2+ ligand interactions in the gaseous and aqueous phases shows that differences in interactions with a few, local water molecules led to a clear periodic trend within the chalcogenide and halide groups and resulted in the well-known experimentally observed preference of Hg2+ for soft ligands such as thiols. Our approach establishes a basis for understanding Hg speciation in the biosphere.

  5. Tuning sound with soft dielectrics

    Science.gov (United States)

    Bortot, Eliana; Shmuel, Gal

    2017-04-01

    Soft dielectric tubes undergo large deformations when subjected to radial voltage. Using the theory of nonlinear electroelasticity, we investigate how voltage-controlled deformations of these tubes in an array alter acoustic wave propagation through it. We show that the propagation is annihilated across a certain audible frequency range, referred to as a sonic band gap. We carry out a numerical study, to find that the band gap depends nonlinearly on the voltage, owing to geometrical and material nonlinearities. By analyzing different mechanical constraints, we demonstrate that snap-through instabilities resulting from these nonlinearities can be harnessed to achieve sharp transitions in the gap width. Our conclusions hint at a new strategy to adaptively filter sound using a simple control parameter—an applied voltage.

  6. Morphogenesis of Growing Soft Tissues

    Science.gov (United States)

    Dervaux, Julien; Ben Amar, Martine

    2008-08-01

    Recently, much attention has been given to a noteworthy property of some soft tissues: their ability to grow. Many attempts have been made to model this behavior in biology, chemistry, and physics. Using the theory of finite elasticity, Rodriguez has postulated a multiplicative decomposition of the geometric deformation gradient into a growth-induced part and an elastic one needed to ensure compatibility of the body. In order to fully explore the consequences of this hypothesis, the equations describing thin elastic objects under finite growth are derived. Under appropriate scaling assumptions for the growth rates, the proposed model is of the Föppl von Kármán type. As an illustration, the circumferential growth of a free hyperelastic disk is studied.

  7. Soft Skills in Pedagogical Practices with Different Curriculum for Engineering Education

    Science.gov (United States)

    Mohamad, M. M.; Yee, M. H.; Tee, T. K.; Mukhtar, M. Ibrahim; Ahmad, A.

    2017-08-01

    The rapid growth of the economy in Malaysia is a benchmark for the country’s progress. The demand for skilled worker has started to increase from year to year resulted in the implementation of reforms and necessary skills will be applied to each of the graduates who will step into the nature of work. Therefore, a study was conducted to identify the level of soft skills among students in higher education institutions. The study was conducted at the Universiti Tun Hussein Onn Malaysia (UTHM) and involved 302 samples of final year students from Faculty of Civil Engineering, Faculty of Mechanical Engineering and the Faculty of Electrical Engineering. There are several types of soft skills have been viewed on the students such as creative thinking skills, teamwork skills, communication skills, decision-making skills, interpersonal skills and leadership skills. The analysis results show that all of the soft skills are on the high level. Furthermore, the results of ANOVA showed a significant difference in soft skills mastery among Civil Engineering students and Mechanical Engineering students. As a conclusion, the overall level of soft skills mastery among Faculty of Civil Engineering, Faculty of Mechanical Engineering and the Faculty of Electrical Engineering students is on the high level. The soft skills elements are very important in order to produce skills workers that suitable with the industry.

  8. Order and chaos in soft condensed matter

    Indian Academy of Sciences (India)

    pensions, surfactant gels and polymeric systems are just a few examples [1]. Soft matter is middle ground between two extremes: the fluid state, where thermal fluctuations are very important, and the solid state. However diverse these sys- tems are, they share certain common features: (i) The constituents that make up soft ...

  9. [Radiotherapy of adult soft tissue sarcoma].

    Science.gov (United States)

    Le Péchoux, C; Moureau-Zabotto, L; Llacer, C; Ducassou, A; Sargos, P; Sunyach, M P; Thariat, J

    2016-09-01

    Incidence of soft tissue sarcoma is low and requires multidisciplinary treatment in specialized centers. The objective of this paper is to report the state of the art regarding indications and treatment techniques of main soft tissue sarcoma localisations. Copyright © 2016 Société française de radiothérapie oncologique (SFRO). Published by Elsevier SAS. All rights reserved.

  10. Order and chaos in soft condensed matter

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 67; Issue 1. Order and chaos in soft condensed matter. A K Sood Rajesh Ganapathy. Volume 67 Issue ... Soft matter, like colloidal suspensions and surfactant gels, exhibit strong response to modest external perturbations. This paper reviews our recent experiments on ...

  11. Novelty Search for Soft Robotic Space Exploration

    NARCIS (Netherlands)

    G. Methenitis (Georgios); D. Hennes; D. Izzo; A. Visser

    2015-01-01

    textabstractThe use of soft robots in future space exploration is still a far-fetched idea, but an attractive one. Soft robots are inherently compliant mechanisms that are well suited for locomotion on rough terrain as often faced in extra-planetary environments. Depending on the particular

  12. 4th World Conference on Soft Computing

    CERN Document Server

    Abbasov, Ali; Yager, Ronald; Shahbazova, Shahnaz; Reformat, Marek

    2016-01-01

    This book reports on advanced theories and cutting-edge applications in the field of soft computing. The individual chapters, written by leading researchers, are based on contributions presented during the 4th World Conference on Soft Computing, held May 25-27, 2014, in Berkeley. The book covers a wealth of key topics in soft computing, focusing on both fundamental aspects and applications. The former include fuzzy mathematics, type-2 fuzzy sets, evolutionary-based optimization, aggregation and neural networks, while the latter include soft computing in data analysis, image processing, decision-making, classification, series prediction, economics, control, and modeling. By providing readers with a timely, authoritative view on the field, and by discussing thought-provoking developments and challenges, the book will foster new research directions in the diverse areas of soft computing. .

  13. Soft error mechanisms, modeling and mitigation

    CERN Document Server

    Sayil, Selahattin

    2016-01-01

    This book introduces readers to various radiation soft-error mechanisms such as soft delays, radiation induced clock jitter and pulses, and single event (SE) coupling induced effects. In addition to discussing various radiation hardening techniques for combinational logic, the author also describes new mitigation strategies targeting commercial designs. Coverage includes novel soft error mitigation techniques such as the Dynamic Threshold Technique and Soft Error Filtering based on Transmission gate with varied gate and body bias. The discussion also includes modeling of SE crosstalk noise, delay and speed-up effects. Various mitigation strategies to eliminate SE coupling effects are also introduced. Coverage also includes the reliability of low power energy-efficient designs and the impact of leakage power consumption optimizations on soft error robustness. The author presents an analysis of various power optimization techniques, enabling readers to make design choices that reduce static power consumption an...

  14. Soft computing techniques in engineering applications

    CERN Document Server

    Zhong, Baojiang

    2014-01-01

    The Soft Computing techniques, which are based on the information processing of biological systems are now massively used in the area of pattern recognition, making prediction & planning, as well as acting on the environment. Ideally speaking, soft computing is not a subject of homogeneous concepts and techniques; rather, it is an amalgamation of distinct methods that confirms to its guiding principle. At present, the main aim of soft computing is to exploit the tolerance for imprecision and uncertainty to achieve tractability, robustness and low solutions cost. The principal constituents of soft computing techniques are probabilistic reasoning, fuzzy logic, neuro-computing, genetic algorithms, belief networks, chaotic systems, as well as learning theory. This book covers contributions from various authors to demonstrate the use of soft computing techniques in various applications of engineering.  

  15. From Soft Walls to Infrared Branes

    CERN Document Server

    von Gersdorff, Gero

    2010-01-01

    Five dimensional warped spaces with soft walls are generalizations of the standard Randall-Sundrum compactifications, where instead of an infrared brane one has a curvature singularity (with vanishing warp factor) at finite proper distance in the bulk. We project the physics near the singularity onto a hypersurface located a small distance away from it in the bulk. This results in a completely equivalent description of the soft wall in terms of an effective infrared brane, hiding any singular point. We perform explicitly this calculation for two classes of soft wall backgrounds used in the literature. The procedure has several advantages. It separates in a clean way the physics of the soft wall from the physics of the five dimensional bulk, facilitating a more direct comparison with standard two-brane warped compactifications. Moreover, consistent soft walls show a sort of universal behavior near the singularity which is reflected in the effective brane Lagrangian. Thirdly, for many purposes, a good approxima...

  16. Soft Space Planning in Cities unbound

    DEFF Research Database (Denmark)

    Olesen, Kristian

    This paper analyses contemporary experiments of building governance capacity in new soft spaces in Denmark through processes of spatial strategy-making. The paper argues that new soft spaces are emerging in Danish spatial planning, which set out to promote more effective forms of strategic spatial...... planning, and how their obsession with promoting economic development at the expense of wider planning responsibilities support contemporary neoliberal transformations of strategic spatial planning....... planning. The Danish case of soft space planning demonstrates how Danish soft spaces at subnational scales fail to fill in the gaps between formal planning structures and provide the glue that binds formal scales of planning together as promised in the soft space literature. This raises a number...

  17. Destruction of cancer cells by laser-induced shock waves: recent developments in experimental treatments and multiscale computer simulations.

    Science.gov (United States)

    Steinhauser, Martin Oliver; Schmidt, Mischa

    2014-07-21

    In this emerging area article we review recent progress in the mechanical destruction of cancer cells using laser-induced shock waves. The pure mechanical damaging and destruction of cancer cells associated with this technique possibly opens up a new route to tumor treatments and the corresponding therapies. At the same time progress in multiscale simulation techniques makes it possible to simulate mechanical properties of soft biological matter such as membranes, cytoskeletal networks and even whole cells and tissue. In this way an interdisciplinary approach to understanding key mechanisms in shock wave interactions with biological matter has become accessible. Mechanical properties of biological materials are also critical for many physiological processes and cover length scales ranging from the atomistic to the macroscopic scale. We argue that the latest developments and progress in experimentation enable the investigation of the shock wave interaction with cancer cells on multiple time- and length-scales. In this way the integrated use of experiment and simulation can address key challenges in this field. The exploration of the biological effects of laser-generated shock waves on a fundamental level constitutes an emerging multidisciplinary research area combining scientific methods from the areas of physics, biology, medicine and computer science.

  18. Destructive effect of polystyrene sulfonate on the structure of hemoproteins

    Science.gov (United States)

    Saburova, E. A.; Basova, L. V.; Dybovskaya, Yu. N.; Sukhorukov, B. I.

    2006-08-01

    The mechanism of the destruction of horse heart hemoglobin (Hb) and spermwhale muscle myoglobin (Mb), two hem-containing proteins, by polystyrene sulfonate, an anionic polyelectrolyte, was studied. Measurements of the optical absorption of the prostetic group of the hem in the visible spectrum and of the circular dichroism in the absorption bands of the peptide groups and aromatic amino acid residues demonstrated that the compact structure of both proteins experiences destruction in the presence of polystyrene sulfonate (PSS) at PSS concentrations ten times as low as that of the protein (in wt %) and that the content of α-helix structure in Hb and Mb decreases from 81% in the native state to 43% in their complexes with PSS. The distinctions in the mechanisms of the destruction of Hb and Mb by PSS were found to be as follows: (1) in contrast to Mb, Hb forms insoluble complexes with PSS at low PSS concentrations and (2) Mb-PSS solutions at Mb-to-PSS ratios >1 were found to contain free hems (that absorb at 397 nm), a feature not observed for Hb; the kinetics of the destruction of both the proteins by the polyelectrolyte was demonstrated to be a two-stage process. The first stage of the destruction of Hb (τ ≈ 24.5 s) was found to be four times as slow as that of Mb (τ ≈ 6 s); the second (slow) stage had a halftime of ˜6 h for both the proteins under study. To determine the localization of regions at the protein molecule surface that are capable of binding polyelectrolyte molecules, the distribution of the electrostatic potential over the surface of the Hb and Mb molecules was numerically calculated with the help of the Poisson-Boltzmann equation at pH 6.2 and an ionic strength of 100 mmol/l. Based on experimental and theoretical studies of the mechanism of the interaction of the polyelectrolyte with the proteins, the structural-functional properties of proteins responsible for their destruction by the polyelectrolyte are determined.

  19. Extranodal lymphoma originating in the gluteal muscle with adjacent bone involvement and mimicking a soft tissue sarcoma

    Directory of Open Access Journals (Sweden)

    Morihiro Katsura

    2015-01-01

    Conclusion: A rapid growth pattern and destructive masses that invade adjacent structures on CT are key findings of DLBCL, and 18F-FDG PET/CT is a useful imaging modality to accurately determine the disease stage and disease aggressiveness of NHL.

  20. CGC/saturation approach for soft interactions at high energy: survival probability of central exclusive production

    Energy Technology Data Exchange (ETDEWEB)

    Gotsman, E.; Maor, U. [Tel Aviv University, Department of Particle Physics, Raymond and Beverly Sackler Faculty of Exact Science, School of Physics and Astronomy, Tel Aviv (Israel); Levin, E. [Tel Aviv University, Department of Particle Physics, Raymond and Beverly Sackler Faculty of Exact Science, School of Physics and Astronomy, Tel Aviv (Israel); Universidad Tecnica Federico Santa Maria, Departemento de Fisica, Centro Cientifico-Tecnologico de Valparaiso, Valparaiso (Chile)

    2016-04-15

    We estimate the value of the survival probability for central exclusive production in a model which is based on the CGC/saturation approach. Hard and soft processes are described in the same framework. At LHC energies, we obtain a small value for the survival probability. The source of the small value is the impact parameter dependence of the hard amplitude. Our model has successfully described a large body of soft data: elastic, inelastic and diffractive cross sections, inclusive production and rapidity correlations, as well as the t-dependence of deep inelastic diffractive production of vector mesons. (orig.)