WorldWideScience

Sample records for rapid demand-side response

  1. Design of demand side response model in energy internet demonstration park

    Science.gov (United States)

    Zhang, Q.; Liu, D. N.

    2017-08-01

    The implementation of demand side response can bring a lot of benefits to the power system, users and society, but there are still many problems in the actual operation. Firstly, this paper analyses the current situation and problems of demand side response. On this basis, this paper analyses the advantages of implementing demand side response in the energy Internet demonstration park. Finally, the paper designs three kinds of feasible demand side response modes in the energy Internet demonstration park.

  2. Impact of Demand Side Response on a Commercial Retail Refrigeration System

    Directory of Open Access Journals (Sweden)

    Ibrahim M. Saleh

    2018-02-01

    Full Text Available The UK National Grid has placed increased emphasis on the development of Demand Side Response (DSR tariff mechanisms to manage load at peak times. Refrigeration systems, along with HVAC, are estimated to consume 14% of the UK’s electricity and could have a significant role for DSR application. However, characterized by relatively low individual electrical loads and massive asset numbers, multiple low power refrigerators need aggregation for inclusion in these tariffs. In this paper, the impact of the Demand Side Response (DSR control mechanisms on food retailing refrigeration systems is investigated. The experiments are conducted in a test-rig built to resemble a typical small supermarket store. The paper demonstrates how the temperature and pressure profiles of the system, the active power and the drawn current of the compressors are affected following a rapid shut down and subsequent return to normal operation as a response to a DSR event. Moreover, risks and challenges associated with primary and secondary Firm Frequency Response (FFR mechanisms, where the load is rapidly shed at high speed in response to changes in grid frequency, is considered. For instance, measurements are included that show a significant increase in peak inrush currents of approx. 30% when the system returns to normal operation at the end of a DSR event. Consideration of how high inrush currents after a DSR event can produce voltage fluctuations of the supply and we assess risks to the local power supply system.

  3. Strategic Demand-Side Response to Wind Power Integration

    DEFF Research Database (Denmark)

    Daraeepour, Ali; Kazempour, Seyyedjalal; Patiño-Echeverri, Dalia

    2016-01-01

    This paper explores the effects of allowing large, price-responsive consumers to provide reserves in a power system with significant penetration of wind energy. A bilevel optimization model represents the utility maximization problem of a large consumer, subject to a stochastic day-ahead co......-optimization of energy and reserves that a system operator would solve to clear the market while considering wind power uncertainty. An examination of the market outcomes from both an illustrative and a large-scale study using this model allows analysis of a) the effects of the type of behavior of the large consumer (i...

  4. History of demand side management and classification of demand response control schemes

    NARCIS (Netherlands)

    Lampropoulos, I.; Kling, W.L.; Ribeiro, P.F.; Berg, van den J.

    2013-01-01

    The scope of this paper is to provide a review on the topic of demand side management. A historical overview provides a critical insight to applied cases, while the discovery of new evidence calls for reconsideration of the design of demand response control schemes. The developments at the demand

  5. Proceedings of the CEATI demand side management workshop on understanding customer response. CD-ROM ed.

    International Nuclear Information System (INIS)

    2006-01-01

    Demand for electricity continues to increase in the midst of environmental concerns, deregulation and the rapid evolution of technology. In order to succeed in a changing environment, utilities must be both adaptive and innovative. Growing concerns over supply and the environmental effects of rising consumption rates have led many utilities to establish demand side management (DSM) programs. However, some utilities have failed to consider the importance of customer behaviour in the success of DSM programs. This conference examined various successful initiatives to encourage customers to reduce their individual or corporate demands for energy. The influence of branding, technology, information prices signals and various other strategies were explored. Issues concerning energy efficiency and customer feedback were discussed. The effect of alternative pricing regimes on DSM programs was investigated. Various information system tools were also examined, and the value of real time electricity monitoring was evaluated. Various DSM initiatives in North America were used to establish benchmarks for the successful implementation of DSM strategies. The conference was divided into 3 sessions: (1) involving the customer in reducing demand; (2) the success of energy efficiency and demand response programs : the impact of branding and the impact of price signals; and (3) the technologies and innovations needed to make it work. The conference featured 13 presentations, of which 8 have been catalogued separately for inclusion in this database. refs., tabs., figs

  6. Proceedings of the CEATI demand side management workshop on understanding customer response. CD-ROM ed.

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    Demand for electricity continues to increase in the midst of environmental concerns, deregulation and the rapid evolution of technology. In order to succeed in a changing environment, utilities must be both adaptive and innovative. Growing concerns over supply and the environmental effects of rising consumption rates have led many utilities to establish demand side management (DSM) programs. However, some utilities have failed to consider the importance of customer behaviour in the success of DSM programs. This conference examined various successful initiatives to encourage customers to reduce their individual or corporate demands for energy. The influence of branding, technology, information prices signals and various other strategies were explored. Issues concerning energy efficiency and customer feedback were discussed. The effect of alternative pricing regimes on DSM programs was investigated. Various information system tools were also examined, and the value of real time electricity monitoring was evaluated. Various DSM initiatives in North America were used to establish benchmarks for the successful implementation of DSM strategies. The conference was divided into 3 sessions: (1) involving the customer in reducing demand; (2) the success of energy efficiency and demand response programs : the impact of branding and the impact of price signals; and (3) the technologies and innovations needed to make it work. The conference featured 13 presentations, of which 8 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  7. Optimal Load Response to Time-of-Use Power Price for Demand Side Management in Denmark

    DEFF Research Database (Denmark)

    Hu, Weihao; Chen, Zhe; Bak-Jensen, Birgitte

    2010-01-01

    -of-use power price for demand side management in order to save the energy costs as much as possible. 3 typical different kinds of loads (industrial load, residential load and commercial load) in Denmark are chosen as study cases. The energy costs decrease up to 9.6% with optimal load response to time......-of-use power price for different loads. Simulation results show that the optimal load response to time-of-use power price for demand side management generates different load profiles and reduces the load peaks. This kind of load patterns may also have significant effects on the power system normal operation.......Since the hourly spot market price is available one day ahead in Denmark, the price could be transferred to the consumers and they may shift their loads from high price periods to the low price periods in order to save their energy costs. This paper presents a load optimization method to time...

  8. The Demand Side Response to Multi-zone Tariffs. Consumer Test Results

    Directory of Open Access Journals (Sweden)

    Adam Olszewski

    2015-12-01

    Full Text Available Advanced Metering Infrastructure (AMI is a technologically advanced solution currently implemented by the most innovative distribution system operators. ENERGA-OPERATOR SA set about preparing for smart metering implementation in 2010. So far the company has installed over 400,000 meters in its area, and plans to install a further 450,000 in 2015. Kalisz, the first fully AMI-covered city in Poland, was chosen for an in-depth analysis of the system. In particular, a consumer test was conducted there with the intention of answering the question about the strength of the demand side response to multi-zone tariffs and power reduction. Conclusions from the year-long test show the demand side response to multi-zone tariffs – i.e. the maximum temporary percentage reduction of energy consumption in the time zone with the tariff raised by a min. of 80% – stays within the 5–15% range. In the case of power reduction (the maximum temporary reduction of energy consumption in the time zone when the power available to a household is limited to 1 kW – the demand side response stays within the 10–30% range. An additional effect of tariff diversification and smart metering is a reduction in electricity consumption by 1–4% on working days (i.e. this is the effect of either the consumption reduction or shifting it to weekends. During the test energy consumers were subjected to both price incentives and education. Due to the fact that it is difficult to separate the effects of education and tariff structures, the company plans to continue the research related to verifying the effectiveness of individual activation tools in reducing electricity consumption by households.

  9. Joint Planning Of Energy Storage and Transmission Considering Wind-Storage Combined System and Demand Side Response

    Science.gov (United States)

    Huang, Y.; Liu, B. Z.; Wang, K. Y.; Ai, X.

    2017-12-01

    In response to the new requirements of the operation mode of wind-storage combined system and demand side response for transmission network planning, this paper presents a joint planning of energy storage and transmission considering wind-storage combined system and demand side response. Firstly, the charge-discharge strategy of energy storage system equipped at the outlet of wind farm and demand side response strategy are analysed to achieve the best comprehensive benefits through the coordination of the two. Secondly, in the general transmission network planning model with wind power, both energy storage cost and demand side response cost are added to the objective function. Not only energy storage operation constraints and but also demand side response constraints are introduced into the constraint condition. Based on the classical formulation of TEP, a new formulation is developed considering the simultaneous addition of the charge-discharge strategy of energy storage system equipped at the outlet of the wind farm and demand side response strategy, which belongs to a typical mixed integer linear programming model that can be solved by mature optimization software. The case study based on the Garver-6 bus system shows that the validity of the proposed model is verified by comparison with general transmission network planning model. Furthermore, the results demonstrate that the joint planning model can gain more economic benefits through setting up different cases.

  10. Demand-side management and demand response in the Ontario energy sectors

    International Nuclear Information System (INIS)

    2003-01-01

    In June 2003, the Ontario Energy Board was asked by the Minister of Energy to identify and review options for the delivery of demand-side management (DSM) and demand response (DR) activities within the electricity sector, by consulting with stakeholders. The role of local distribution company (distributor) in such activities was also to be determined. The objective was to balance implementation costs with the benefits to consumers and the entire system. The preliminary research and ideas were presented in this discussion paper. Definitions of both DSM and DR were provided, followed by an overview of economic theory and competitive markets. The framework for discussion was presented, along with a list of issues and other considerations. A spectrum of potential approaches to a DSM and DR framework was included and jurisdictional examples provided. A brief overview of the concept of load aggregation was presented and the next steps for consultations were outlined. 30 refs., 7 tabs

  11. Benefits of Demand-Side Response in Providing Frequency Response Service in the Future GB Power System

    Energy Technology Data Exchange (ETDEWEB)

    Teng, Fei, E-mail: fei.teng09@imperial.ac.uk; Aunedi, Marko; Pudjianto, Danny; Strbac, Goran [Department of Electrical and Electronic Engineering, Imperial College London, London (United Kingdom)

    2015-08-18

    The demand for ancillary service is expected to increase significantly in the future Great Britain (GB) electricity system due to high penetration of wind. In particular, the need for frequency response, required to deal with sudden frequency drops following a loss of generator, will increase because of the limited inertia capability of wind plants. This paper quantifies the requirements for primary frequency response and analyses the benefits of frequency response provision from demand-side response (DSR). The results show dramatic changes in frequency response requirements driven by high penetration of wind. Case studies carried out by using an advanced stochastic generation scheduling model suggest that the provision of frequency response from DSR could greatly reduce the system operation cost, wind curtailment, and carbon emissions in the future GB system characterized by high penetration of wind. Furthermore, the results demonstrate that the benefit of DSR shows significant diurnal and seasonal variation, whereas an even more rapid (instant) delivery of frequency response from DSR could provide significant additional value. Our studies also indicate that the competing technologies to DSR, namely battery storage, and more flexible generation could potentially reduce its value by up to 35%, still leaving significant room to deploy DSR as frequency response provider.

  12. Benefits of Demand-Side Response in Providing Frequency Response Service in the Future GB Power System

    International Nuclear Information System (INIS)

    Teng, Fei; Aunedi, Marko; Pudjianto, Danny; Strbac, Goran

    2015-01-01

    The demand for ancillary service is expected to increase significantly in the future Great Britain (GB) electricity system due to high penetration of wind. In particular, the need for frequency response, required to deal with sudden frequency drops following a loss of generator, will increase because of the limited inertia capability of wind plants. This paper quantifies the requirements for primary frequency response and analyses the benefits of frequency response provision from demand-side response (DSR). The results show dramatic changes in frequency response requirements driven by high penetration of wind. Case studies carried out by using an advanced stochastic generation scheduling model suggest that the provision of frequency response from DSR could greatly reduce the system operation cost, wind curtailment, and carbon emissions in the future GB system characterized by high penetration of wind. Furthermore, the results demonstrate that the benefit of DSR shows significant diurnal and seasonal variation, whereas an even more rapid (instant) delivery of frequency response from DSR could provide significant additional value. Our studies also indicate that the competing technologies to DSR, namely battery storage, and more flexible generation could potentially reduce its value by up to 35%, still leaving significant room to deploy DSR as frequency response provider.

  13. Demand-side management and demand response in the Ontario energy sectors

    International Nuclear Information System (INIS)

    2004-01-01

    A directive from the former Minister of Energy was received by the Ontario Energy Board (OEB), directing the Board to consult with stakeholders on options for the delivery of demand-side management (DSM) and demand response (DR) activities within the electricity sector, including the role of local distribution companies in such activities. The implementation costs were to be balanced with the benefits to both consumers and the entire system. The scope of the review was expanded by the Board to include the role of gas distribution companies in DSM. A consultation process was implemented and stakeholders were invited to participate. A series of recommendations was made, including: (1) a hybrid framework utilizing market-based and public-policy approaches should deliver DSM and DR activities in Ontario's energy markets, (2) DSM and DR activities should come under the responsibility of a central agency, (3) DSM and DR activities should be coordinated through cooperation between the Ministry of Energy, the Independent Electricity Market Operator (IMO) and the Ontario Energy Board, (4) regulatory mechanisms to induce gas distributors, electricity transmitters and electricity distributors to reduce distribution system losses should be put in place, (5) all electricity consumers should fund electricity DSM and some retail DR initiatives through a transparent, non-bypassable consumption charge, and (6) the Board should design, develop and deliver information to consumers regarding energy conservation, energy efficiency, load management, and cleaner sources of energy. refs., 4 figs

  14. Demand Side Management in a competitive European market: Who should be responsible for its implementation?

    International Nuclear Information System (INIS)

    Didden, Marcel H.; D'Haeseleer, William D.

    2003-01-01

    Demand side management (DSM), more specifically energy efficiency, is standing in the spotlight due to the Kyoto commitments. An additional factor, the liberalization of the electricity markets, causes every country to review its own DSM activities. Especially in Europe, where the directive for opening the electricity market has a direct impact on the current DSM frameworks, governments will have to consider a change in this framework. In order to achieve this, much research has been done in the past years on how to change the DSM framework in a way that the requirements of both liberalization and the Kyoto Protocol will be met. In this paper, we review the current DSM activities and ongoing research from the starting point 'who should be responsible for implementing DSM'. We conclude that countries have to make explicit choices on how to arrange their DSM activities for the different customers groups. They have to be aware of the fact that some combinations of DSM activities will lead to counter-productive results and therefore inefficiency. This paper also investigates which of these DSM activities fits best in the open market; a critical review of Integrated Resource Planning (IRP) is used as a starting point. We agree with various proponents of IRP that planning towards minimal societal costs is theoretically appropriate, looking from a societal point of view. We also indicate in this paper that the planning process IRP is partly applicable in the open market. But looking at the practical application of IRP in the past, we must conclude that there are better alternatives for achieving energy efficient goals in a liberalized market

  15. Benefits of Demand Side Response in Providing Frequency Response Service in the Future GB Power System

    Directory of Open Access Journals (Sweden)

    Fei eTeng

    2015-08-01

    Full Text Available The demand for ancillary service is expected to increase significantly in the future GB electricity system due to high penetration of wind. In particular, the need for frequency response, required to deal with sudden frequency drops following a loss of generator, will increase because of the limited inertia capability of wind plants. This paper quantifies the requirements for primary frequency response and analyses the benefits of frequency response provision from DSR. The results show dramatic changes in frequency response requirements driven by high penetration of wind. Case studies carried out by using an advanced stochastic generation scheduling model suggest that the provision of frequency response from DSR could greatly reduce the system operation cost, wind curtailment and carbon emissions in the future GB system characterised by high penetration of wind. Furthermore, the results demonstrate that the benefit of DSR shows significant diurnal and seasonal variation, whereas an even more rapid (instant delivery of frequency response from DSR could provide significant additional value. Our studies also indicate that the competing technologies to DSR, namely battery storage and more flexible generation could potentially reduce its value by up to 35%, still leaving significant room to deploy DSR as frequency response provider.

  16. Demand-Side Flexibility for Energy Transitions: Policy Recommendations for Developing Demand Response

    OpenAIRE

    Nursimulu, Anjali; Florin, Marie-Valentine; Vuille, François

    2016-01-01

    As a follow-up to IRGC's report on demand-side flexibility for energy transitions, this Policy Brief highlights that increasing flexibility in power systems is needed to accommodate higher shares of non-controllable and intermittent renewable generation, and that this requires changes to the market design and regulatory framework, to facilitate the development and deployment of appropriate technologies and market-based instruments (e.g. taxes and subsidies). The Policy Brief focuses on demand...

  17. Demand-Side Flexibility for Energy Transitions: Ensuring the Competitive Development of Demand Response Options

    OpenAIRE

    Nursimulu, Anjali; Florin, Marie-Valentine; Vuille, François

    2015-01-01

    This report provides an overview of the current debates about demand response development, focusing primarily on Europe, with some comparisons to the United States. ‘Demand response’ includes strategies that involve end-use customers adapting or altering their electricity demand in response to grid conditions or market prices. It is viewed as a multi-purpose power-system resource that enhances the energy system’s capacity to cope with increasing demand, rising costs of conventional transmissi...

  18. Flexible investment under uncertainty in smart distribution networks with demand side response: Assessment framework and practical implementation

    International Nuclear Information System (INIS)

    Schachter, Jonathan A.; Mancarella, Pierluigi; Moriarty, John; Shaw, Rita

    2016-01-01

    Classical deterministic models applied to investment valuation in distribution networks may not be adequate for a range of real-world decision-making scenarios as they effectively ignore the uncertainty found in the most important variables driving network planning (e.g., load growth). As greater uncertainty is expected from growing distributed energy resources in distribution networks, there is an increasing risk of investing in too much or too little network capacity and hence causing the stranding and inefficient use of network assets; these costs are then passed on to the end-user. An alternative emerging solution in the context of smart grid development is to release untapped network capacity through Demand-Side Response (DSR). However, to date there is no approach able to quantify the value of ‘smart’ DSR solutions against ‘conventional’ asset-heavy investments. On these premises, this paper presents a general real options framework and a novel probabilistic tool for the economic assessment of DSR for smart distribution network planning under uncertainty, which allows the modeling and comparison of multiple investment strategies, including DSR and capacity reinforcements, based on different cost and risk metrics. In particular the model provides an explicit quantification of the economic value of DSR against alternative investment strategies. Through sensitivity analysis it is able to indicate the maximum price payable for DSR service such that DSR remains economically optimal against these alternatives. The proposed model thus provides Regulators with clear insights for overseeing DSR contractual arrangements. Further it highlights that differences exist in the economic perspective of the regulated DNO business and of customers. Our proposed model is therefore capable of highlighting instances where a particular investment strategy is favorable to the DNO but not to its customers, or vice-versa, and thus aspects of the regulatory framework which may

  19. Report of the advisory group on demand-side management and demand response in Ontario in response to the Minister's directive to the Ontario Energy Board

    International Nuclear Information System (INIS)

    2003-01-01

    The Ontario Energy Board was directed in June 2003 to consult with stakeholders to identify and review options for the delivery of demand-side management (DSM) and demand response (DR) activities within the electricity sector, including the role of local distribution companies (distributors) in such activities. A total of 118 stakeholders participated in the consultation process, and 31 representatives from all sectors were then invited to take part in an advisory working group to develop options to be considered by the Board when preparing the recommendations to the Minister. This report presents a consolidation of the Group's working documents and the results of deliberations both as a unit and in small groups. The best way to present the many newly developed models was as a single Central Agency model demonstrating variations in the role of the Central Agency and other players in the electricity market. The paper was divided into the following six sections: introduction; market issues; demand response framework option; central agency framework-alternative models; Ontario Energy Board-wires companies DSM framework; and, general issues

  20. Electrical network capacity support from demand side response: Techno-economic assessment of potential business cases for small commercial and residential end-users

    International Nuclear Information System (INIS)

    Martínez Ceseña, Eduardo A.; Good, Nicholas; Mancarella, Pierluigi

    2015-01-01

    Demand Side Response (DSR) is recognised for its potential to bring economic benefits to various electricity sector actors, such as energy retailers, Transmission System Operators (TSOs) and Distribution Network Operators (DNOs). However, most DSR is provided by large industrial and commercial consumers, and little research has been directed to the quantification of the value that small (below 100 kW) commercial and residential end-users could accrue by providing DSR services. In particular, suitable models and studies are needed to quantify potential business cases for DSR from small commercial and residential end-users. Such models and studies should consider the technical and physical characteristics of the power system and demand resources, together with the economic conditions of the power market. In addition, the majority of research focuses on provision of energy arbitrage or ancillary services, with very little attention to DSR services for network capacity support. Accordingly, this paper presents comprehensive techno-economic methodologies for the quantification of three capacity-based business cases for DSR from small commercial and residential end-users. Case study results applied to a UK context indicate that, if the appropriate regulatory framework is put in place, services for capacity support to both DNOs and TSOs can result into potentially attractive business cases for DSR from small end-users with minimum impact on their comfort level. -- Highlights: •We present three business cases for DSR from domestic and commercial end-users. •A comprehensive techno-economic methodology is proposed for the quantification of each DSR business cases. •The regulatory implications associated with each business case are discussed

  1. Data model for Demand Side Management

    Directory of Open Access Journals (Sweden)

    Simona-Vasilica OPREA

    2017-08-01

    Full Text Available Demand Side Management (DSM is a portfolio of measures to improve the energy system mainly at the consumption level. In this paper we propose a data model for DSM stating from the optimization methods approach in SMARTRADE project from different perspectives of several entities that include: Transmission System Operator (TSO/Distribution System Operators (DSOs perspectives in case of security/reliability concerns: minimum amount of load (or generation shedding; aggregators perspective in case of demand or generation shedding request: Which demand (or generators should be shed?; consumers perspective: load shifting (time-of-use (ToU tariffs and optimum contract strategies with the aggregators (also known as balancing responsible parties- BRP for load shedding.

  2. Demand Side Management: An approach to peak load smoothing

    Science.gov (United States)

    Gupta, Prachi

    A preliminary national-level analysis was conducted to determine whether Demand Side Management (DSM) programs introduced by electric utilities since 1992 have made any progress towards their stated goal of reducing peak load demand. Estimates implied that DSM has a very small effect on peak load reduction and there is substantial regional and end-user variability. A limited scholarly literature on DSM also provides evidence in support of a positive effect of demand response programs. Yet, none of these studies examine the question of how DSM affects peak load at the micro-level by influencing end-users' response to prices. After nearly three decades of experience with DSM, controversy remains over how effective these programs have been. This dissertation considers regional analyses that explore both demand-side solutions and supply-side interventions. On the demand side, models are estimated to provide in-depth evidence of end-user consumption patterns for each North American Electric Reliability Corporation (NERC) region, helping to identify sectors in regions that have made a substantial contribution to peak load reduction. The empirical evidence supports the initial hypothesis that there is substantial regional and end-user variability of reductions in peak demand. These results are quite robust in rapidly-urbanizing regions, where air conditioning and lighting load is substantially higher, and regions where the summer peak is more pronounced than the winter peak. It is also evident from the regional experiences that active government involvement, as shaped by state regulations in the last few years, has been successful in promoting DSM programs, and perhaps for the same reason we witness an uptick in peak load reductions in the years 2008 and 2009. On the supply side, we estimate the effectiveness of DSM programs by analyzing the growth of capacity margin with the introduction of DSM programs. The results indicate that DSM has been successful in offsetting the

  3. Communication technologies for demand side management

    Energy Technology Data Exchange (ETDEWEB)

    Uuspaeae, P [VTT Energy, Espoo (Finland)

    1998-08-01

    The scope of this research is data communications for electric utilities, specifically for the purposes of Demand Side Management (DSM). Demand Side Management has the objective to change the customer`s end use of energy in a manner that benefits both the customer and the utility. For example, peak demand may be reduced, and the peak demand may be relocated to off peak periods. Thus additional investments in generation and network may be avoided. A number of Demand Side Management functions can be implemented if a communication system is available between the Electric Utility and the Customer. The total communication capacity that is needed, will depend on several factors, such as the functions that are chosen for DSM, and on the number and type of customers. Some functions may be handled with one-way communications, while some other functions need to have two-way communication

  4. Demand Side Management for Multiple Devices

    NARCIS (Netherlands)

    Molderink, Albert; Bakker, Vincent; Smit, Gerardus Johannes Maria

    Steering a heterogeneous set of devices in a Smart Grid using cost functions: Demand Side Management (DSM) is an important element in smart grids. DSM is already in operation for large consumers, but thorough research is required into DSM on a building level within the distribution grid.

  5. Demand side management using profile steering

    NARCIS (Netherlands)

    Gerards, Marco Egbertus Theodorus; Toersche, Hermen; Hoogsteen, Gerwin; van der Klauw, Thijs; Hurink, Johann L.; Smit, Gerardus Johannes Maria

    2015-01-01

    Many Demand Side Management (DSM) approaches use energy prices as steering signals. This paper shows that such steering signals may result in power quality problems and high losses. As an alternative, this paper proposes to use desired (e.g., flat) power profiles as steering signals and presents an

  6. Industrial demand side management: A status report

    Energy Technology Data Exchange (ETDEWEB)

    Hopkins, M.F.; Conger, R.L.; Foley, T.J. [and others

    1995-05-01

    This report provides an overview of and rationale for industrial demand side management (DSM) programs. Benefits and barriers are described, and data from the Manufacturing Energy Consumption Survey are used to estimate potential energy savings in kilowatt hours. The report presents types and examples of programs and explores elements of successful programs. Two in-depth case studies (from Boise Cascade and Eli Lilly and Company) illustrate two types of effective DSM programs. Interviews with staff from state public utility commissions indicate the current thinking about the status and future of industrial DSM programs. A comprehensive bibliography is included, technical assistance programs are listed and described, and a methodology for evaluating potential or actual savings from projects is delineated.

  7. Applying demand side management using a generalised grid supportive approach

    NARCIS (Netherlands)

    Blaauwbroek, N.; Nguyen, H.P.; Slootweg, J.G.

    2017-01-01

    Demand side management is often seen as a promising tool for distribution network operators to mitigate network operation limit violations. Many demand side management applications have been proposed, each with their own objectives and methodology. Quite often, these demand side management

  8. Promoting healthcare innovation on the demand side

    Science.gov (United States)

    Eisenberg, Rebecca S.

    2017-01-01

    Abstract Innovation policy often focuses on fortifying the incentives of firms that develop and sell new products by offering them lucrative rights to exclude competitors from the market. Regulators also rely on these same firms—and on similar incentives—to develop information about the effects of their products in patients, despite their obvious conflict of interest. The result may be a distorted understanding that leads to overuse of expensive new medical technologies. Recent technological advances have put healthcare payers in an excellent position to play a larger role in future innovation to improve healthcare and reduce its costs. Insurance companies and integrated healthcare providers have custody of treasure troves of data about healthcare provision and outcomes that can yield valuable insights about the effects of medical treatment without the need to conduct costly clinical trials. Some integrated healthcare systems have seized upon this advantage to make notable discoveries about the effects of particular products that have changed the standard of care. Moreover, to the extent that healthcare payers can profit from reducing costs, they will seek to avoid inappropriate use of costly technologies. Greater involvement of payers in healthcare innovation thus offers a potential counterweight to the incentives of product sellers to promote excessive use of costly new products. In recent years, the federal government has sought to promote innovation through analysis of healthcare records in a series of initiatives; some picture insurers as passive data repositories, while others provide opportunities for insurers to take a more active role in innovation. In this paper, we examine the role of health insurers in developing new knowledge about the provision and effects of healthcare—what we call ‘demand-side innovation’. We address the contours of this underexplored area of innovation and describe the behavior of participating firms. We examine the

  9. Evaluation of demand-side management programs

    International Nuclear Information System (INIS)

    Kolbe, A.L.; O'Loughlin, M.P.

    1990-01-01

    Over the past few years, the attention accorded to demand-side management (DSM) measures has called into question the traditional cost minimization approach for evaluating such programs. Two broad approaches to DSM seem to be generally used: one examining the problem from multiple perspectives and the other including various practical methods used in-house by utility planners. Whatever the standard used to evaluate DSM, there remains at least one problem which cannot be quantified. The customers who participate in a DSM program cannot only take into account the effects of DSM on their electricity bills; their comfort can also be affected. This lowering of comfort constitutes a legitimate cost which can explain why some apparently sensible DSM measures are not adopted. A method is proposed to incorporate this cost. It establishes a way to evaluate DSM program tradeoffs that, from the perspective of standard economic theory, maximizes social welfare; explains why at least one of the perspectives in the multiple perspective approach needs to be modified to incorporate all customer costs; and outlines how the proposed standard can be implemented. 8 refs

  10. Demand side management. Benefits and challenges

    International Nuclear Information System (INIS)

    Strbac, Goran

    2008-01-01

    In this paper, the major benefits and challenges of electricity demand side management (DSM) are discussed in the context of the UK electricity system. The relatively low utilisation of generation and networks (of about 50%) means that there is significant scope for DSM to contribute to increasing the efficiency of the system investment. The importance of the diversity of electricity load is discussed and the negative effects of DSM on load diversity illustrated. Ageing assets, the growth in renewable and other low-carbon generation technologies and advances in information and communication technologies are identified as major additional drivers that could lead to wider applications of DSM in the medium term. Potential benefits of DSM are discussed in the context of generation and of transmission and distribution networks. The provision of back-up capacity by generation may not be efficient as it will be needed relatively infrequently, and DSM may be better placed to support security. We also present an analysis of the value of DSM in balancing generation and demand in a future UK electricity system with significant variable renewable generation. We give a number of reasons for the relatively slow uptake of DSM, particularly in the residential, commercial and small business sectors. They include a lack of metering, information and communication infrastructure, lack of understanding of the benefits of DSM, problems with the competitiveness of DSM when compared with traditional approaches, an increase in the complexity of system operation and inappropriate market incentives. (author)

  11. Emerging technologies for demand side management. Demand side management jitsugen no tame no saishin gijutsu

    Energy Technology Data Exchange (ETDEWEB)

    Suzuki, H; Iyoda, I [Mitsubishi Electric Corp., Tokyo (Japan)

    1993-11-05

    This paper explains the latest situation in hardware technologies to realize the demand side management, divided into the following technologies: communications technology, measurement technology, client information system technology, load controlling technology, home automation technology, and energy storing and saving technologies. Speaking of the communications technology, information exchange between the supply side and the demand side is important in the demand side management, whereas a technology intended of automatic power distribution and automatic meter-reading is advancing in development. The technology covers transmissions using from power lines and telephone lines to optical cables and wireless communications. Power line communications using power transmission lines as communication lines are simple and economical, but weak against noise, and not suitable for long-distance communications. Wireless communications have been drawing attentions along with the development of mobile communication device technologies. These technologies will give benefits to electric power companies in the initial stage of their use, such as for load investigation and general automation in power distribution. They would shift to benefiting users in about 2010 covering from security information such as about power interruption to publicity information and educations. 8 refs., 8 figs., 1 tab.

  12. Towards demand-side solutions for mitigating climate change

    Science.gov (United States)

    Creutzig, Felix; Roy, Joyashree; Lamb, William F.; Azevedo, Inês M. L.; Bruine de Bruin, Wändi; Dalkmann, Holger; Edelenbosch, Oreane Y.; Geels, Frank W.; Grubler, Arnulf; Hepburn, Cameron; Hertwich, Edgar G.; Khosla, Radhika; Mattauch, Linus; Minx, Jan C.; Ramakrishnan, Anjali; Rao, Narasimha D.; Steinberger, Julia K.; Tavoni, Massimo; Ürge-Vorsatz, Diana; Weber, Elke U.

    2018-04-01

    Research on climate change mitigation tends to focus on supply-side technology solutions. A better understanding of demand-side solutions is missing. We propose a transdisciplinary approach to identify demand-side climate solutions, investigate their mitigation potential, detail policy measures and assess their implications for well-being.

  13. Accurate Estimation of Target amounts Using Expanded BASS Model for Demand-Side Management

    Science.gov (United States)

    Kim, Hyun-Woong; Park, Jong-Jin; Kim, Jin-O.

    2008-10-01

    The electricity demand in Korea has rapidly increased along with a steady economic growth since 1970s. Therefore Korea has positively propelled not only SSM (Supply-Side Management) but also DSM (Demand-Side Management) activities to reduce investment cost of generating units and to save supply costs of electricity through the enhancement of whole national energy utilization efficiency. However study for rebate, which have influence on success or failure on DSM program, is not sufficient. This paper executed to modeling mathematically expanded Bass model considering rebates, which have influence on penetration amounts for DSM program. To reflect rebate effect more preciously, the pricing function using in expanded Bass model directly reflects response of potential participants for rebate level.

  14. Research on electricity market operation mechanism and its benefit of demand side participation

    Science.gov (United States)

    Han, Shuai; Yan, Xu; Qin, Li-juan; Lin, Xi-qiao; Zeng, Bo

    2017-08-01

    Demand response plays an important role in maintaining the economic stability of the system, and has the characteristics of high efficiency, low cost, fast response, good environmental benefits and so on. Demand side resource is an important part of electricity market. The research of demand side resources in our country is still in the initial stage, but the opening of the electricity sales side provides a broad prospect for the development of electricity market. This paper summarizes the main types of demand side resources in our country, analyzes the economic principle of demand response from the micro perspective, puts forward some suggestions on the operation mechanism of China’s demand side resources participating in the electricity market under the condition of electricity sales side opening, analyzes the current situation of pricing in the electricity wholesale market and sets up the pricing strategy of the centralized wholesale market with the demand side power supply participating in quotation, which makes the social and economic benefits reach the maximum.

  15. Cost benefit analysis of the demand side management programs

    International Nuclear Information System (INIS)

    Schechtman, R.; Baum, M.

    1989-01-01

    The several cost and benefit components of the demand side management programs for the society groups, including the concessionaire, consumers and society as a whole are studied. The rule evaluations of management programs by demand side, used by North American concessionaire are also discussed. Finally, the numerical examples, that consolidating the concepts and rules evaluation are presented. (C.G.C.). 5 refs, 1 fig, 3 tabs

  16. Demand-side management: The perspective of a combination utility

    International Nuclear Information System (INIS)

    Packard, C.P.

    1993-01-01

    During the 1980's, Baltimore Gas ampersand Electric (BG ampersand E) met part of the rapid growth in demand for electricity in its service territory by implementing cost-effective demand-side management (DSM) programs--specifically, peak shaving and load shifting strategies. BG ampersand E's focus in the 1990's has been expanded to include all DSM options with an increasing emphasis on those which promote overall 1 energy efficiency or strategic conservation. This change in focus is being driven by Federal legislation, state regulatory requirements and the perceived potential benefits for both the customer and the Company. Current activities related to DSM include involvement in a Collaborative Process to design cost-effective electric and gas conservation programs for all customer classes--low-income, residential, commercial and industrial. Program design consists of four steps: (1) data gathering and technology assessment; (2) development of program concepts; (3) detailed program design and (4) monitoring and evaluation. Significant reductions in the projected peaks as well as in sales in future years are the anticipated results of our efforts. As a combination utility, unique opportunities and challenges face BG ampersand E: fuel switching, eligibility of non-full requirements customers, and energy options for customers

  17. Co-optimization of Energy and Demand-Side Reserves in Day-Ahead Electricity Markets

    Science.gov (United States)

    Surender Reddy, S.; Abhyankar, A. R.; Bijwe, P. R.

    2015-04-01

    This paper presents a new multi-objective day-ahead market clearing (DAMC) mechanism with demand-side reserves/demand response (DR) offers, considering realistic voltage-dependent load modeling. The paper proposes objectives such as social welfare maximization (SWM) including demand-side reserves, and load served error (LSE) minimization. In this paper, energy and demand-side reserves are cleared simultaneously through co-optimization process. The paper clearly brings out the unsuitability of conventional SWM for DAMC in the presence of voltage-dependent loads, due to reduction of load served (LS). Under such circumstances multi-objective DAMC with DR offers is essential. Multi-objective Strength Pareto Evolutionary Algorithm 2+ (SPEA 2+) has been used to solve the optimization problem. The effectiveness of the proposed scheme is confirmed with results obtained from IEEE 30 bus system.

  18. DSM [demand-side management] financing: Risks and incentives

    International Nuclear Information System (INIS)

    Dayton, D.S.

    1992-01-01

    Opportunities to make investments in demand side management (DSM) are widespread, especially among large, complex, energy-intensive customers. Acceptable economics are found for energy efficiency improvements, new construction or renovation, replacement of failing or obsolete equipment, and retrofit of existing facilities with more efficient equipment and operations. Market imperfections and technical limitations intrude on the DSM investment process. These intrusions are examined from a financial viewpoint by considering the return on investment and risks faced by the three potential investors in DSM opportunities: the customer, the utility, and the third party contractor or financier. These risks are illustrated by examining the cash flow of a typical project depicting a comprehensive energy efficiency installation in a medium to large industrial or institutional facility. The spread between the customer's risk/return ratio and that of the other two investors is shown to be surprisingly large. A utility role in marketing and financing, as opposed to direct subsidizing of customers or direct purchase of DSM resources from third parties, is explored as an efficient response to these realities. 2 figs., 3 tabs

  19. How to introduce demand side resources in the design of low-carbon power systems in China

    Science.gov (United States)

    Zhou, Pengcheng; Liu, Yiqun; Zeng, Ming; Sun, Chenjun

    2018-04-01

    Nowadays, China's energy demand sustained rapid growth, and the coal-based energy structure has adverse effects on the environment. The flexibility of demand side resource (DSR) will be greatly improved, and DSR can reduce electricity consumption actively and temporarily, and realize energy saving and emission reduction. But there are still some problems to introduce DSR in China. This paper proposes three practices for introducing demand side resources to improve the flexibility of power systems through demand resources.

  20. U.S. electric utility demand-side management 1995

    International Nuclear Information System (INIS)

    1997-01-01

    The US Electric Utility Demand-Side Management report is prepared by the Coal and Electric Data and Renewables Division; Office of Coal, Nuclear, Electric and Alternative Fuels; Energy Information Administration (EIA); US Department of Energy. The report presents comprehensive information on electric power industry demand-side management (DSM) activities in the US at the national, regional, and utility levels. The objective of the publication is to provide industry decision makers, government policy makers, analysts, and the general public with historical data that may be used in understanding DSM as it relates to the US electric power industry. The first chapter, ''Profile: US Electric Utility Demand-Side Management'', presents a general discussion of DSM, its history, current issues, and a review of key statistics for the year. Subsequent chapters present discussions and more detailed data on energy savings, peak load reductions and costs attributable to DSM. 9 figs., 24 tabs

  1. Primary Control by ON/OFF Demand-Side Devices

    DEFF Research Database (Denmark)

    Biegel, Benjamin; Hansen, Lars Henrik; Andersen, Palle

    2013-01-01

    We consider an aggregator managing a portfolio of ON/OFF demand-side devices. The devices are able to shift con- sumption in time within certain energy limitations; moreover, the devices are able to measure the system frequency and switch ON and OFF accordingly. We show how the aggregator can...

  2. Balancing islanded residential microgrids using demand side management

    NARCIS (Netherlands)

    Hoogsteen, Gerwin; van der Klauw, Thijs; Molderink, Albert; Hurink, Johann L.; Smit, Gerardus Johannes Maria; Feng, Xianyong; Hebner, Robert E.

    2016-01-01

    Now that the internet of things is emerging, control of domestic assets within the smart micro grids is also gaining interest. Furthermore, these micro grids may operate in islanded mode for short periods. Various demand side management approaches are presented in literature to control these assets.

  3. Using Demand Side Management to Adapt to Water Scarcity and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The Saiss is a sub-basin of the Sebou basin in Northern Morocco. Due to decreased precipitation and increased water demand, the surface waters of the Saiss basin have been greatly reduced. At the current rate of exploitation, the aquifer will be depleted within 25 years. This project will examine whether demand-side ...

  4. Load building versus conservation as demand-side management objectives

    International Nuclear Information System (INIS)

    Kexel, D.T.

    1994-01-01

    This paper examines the economics of load building versus conservation as demand-side management objectives. Economic criteria to be used in evaluating each type of program from the perspectives of all impacted parties are provided. The impact of DSM programs on electric rates is shown to be a key focal point of a thorough evaluation

  5. Using demand-side management to decrease transformer ageing

    NARCIS (Netherlands)

    van der Klauw, Thijs; Gerards, Marco Egbertus Theodorus; Hurink, Johann L.

    2016-01-01

    The introduction of local, often uncontrollable, generation units as well as larger loads such as electric vehicles (EVs) causes an increasing amount of stress on our energy supply chain, specifically on the distribution grids. Demand-side management (DSM) is often seen as a potential technology to

  6. Demand side integration aspects in active distribution planning

    DEFF Research Database (Denmark)

    Silvestro, Federico; Baitch, Alex; Pilo, Fabrizio

    2013-01-01

    will be implemented in practice? How will regulatory frameworks and connection agreements evolve to support ADSs? The present work provides some information about the closer and closer integration between network planning and Demand Side Integration that is foreseen in the future and shows the necessity to develop...

  7. Rapid response systems.

    Science.gov (United States)

    Lyons, Patrick G; Edelson, Dana P; Churpek, Matthew M

    2018-07-01

    Rapid response systems are commonly employed by hospitals to identify and respond to deteriorating patients outside of the intensive care unit. Controversy exists about the benefits of rapid response systems. We aimed to review the current state of the rapid response literature, including evolving aspects of afferent (risk detection) and efferent (intervention) arms, outcome measurement, process improvement, and implementation. Articles written in English and published in PubMed. Rapid response systems are heterogeneous, with important differences among afferent and efferent arms. Clinically meaningful outcomes may include unexpected mortality, in-hospital cardiac arrest, length of stay, cost, and processes of care at end of life. Both positive and negative interventional studies have been published, although the two largest randomized trials involving rapid response systems - the Medical Early Response and Intervention Trial (MERIT) and the Effect of a Pediatric Early Warning System on All-Cause Mortality in Hospitalized Pediatric Patients (EPOCH) trial - did not find a mortality benefit with these systems, albeit with important limitations. Advances in monitoring technologies, risk assessment strategies, and behavioral ergonomics may offer opportunities for improvement. Rapid responses may improve some meaningful outcomes, although these findings remain controversial. These systems may also improve care for patients at the end of life. Rapid response systems are expected to continue evolving with novel developments in monitoring technologies, risk prediction informatics, and work in human factors. Copyright © 2018 Elsevier B.V. All rights reserved.

  8. Internet of Things, Challenges for Demand Side Management

    Directory of Open Access Journals (Sweden)

    Simona-Vasilica OPREA

    2017-01-01

    Full Text Available The adoption of any new product means also the apparition of new issues and challenges, and this is especially true when we talk about a mass adoption. The advent of Internet of Things (IoT devices will be, in the authors of this paper opinion, the largest and the fastest product adoption yet to be seen, as several early sources were predicting a volume of 50 billion IoT devices to be active by 2020 [1][2]. While later forecasts reduced the predicted amount to about 20-30 billion devices [3], even for such “reduced” number, demand side management issues are foreseeable, for the potential economic impact of IoT applications in 2025 will be between 3.9 and $11.1 trillion USD [4]. Not only that new patterns will emerge in energy consumption and Internet traffic, but we predict that the sheer amount of data produced by this quantity of IoT devices will give birth to a new sort of demand side management, the demand side management of IoT data. How will this work is yet to be seen but, at the current moment, one can at least identify the bits and pieces that will constitute it. This paper is intended to serve as short guide regarding the possible challenges raised by the adoption of IoT devices. The data types and structures, lifecycle and patterns will be briefly discussed throughout the following article.

  9. Linking meters and markets: Roles and incentives to support a flexible demand side

    DEFF Research Database (Denmark)

    Katz, Jonas

    2014-01-01

    wholesale market participants to the demand side is mostly infeasible, resulting in flexibility tasks being aggregated and delegated to balancing responsible wholesale traders. This analysis focuses on whether current incentives and roles are appropriate and where the design could be improved to establish......Present trends in the development of electricity systems are expected to generate a growing need for flexibility in decentralised resources, including demand response. In order to enable decentralised actors to create value, the organisation of markets and incentives should incorporate these new...... a flexible demand side with a particular focus on the Danish case. Design-related barriers are identified that affect expected value, associated risks, and the distribution of responsibilities. This serves as a basis to define policy options in the context of Nordic electricity markets. © 2014 Elsevier Ltd...

  10. Impact of Demand Side Management in Active Distribution Networks

    DEFF Research Database (Denmark)

    Ponnaganti, Pavani; Bak-Jensen, Birgitte; Pillai, Jayakrishnan Radhakrishna

    2017-01-01

    Demand Side Management (DSM) is an efficient flexible program which helps distribution network operators to meet the future critical peak demand. It is executed in cases of not only technical issues like voltage sag or swell, transformer burdening, cable congestions, but also to increase the degree...... of visibility in the electricity markets. The aim of this paper is to find the optimal flexible demands that can be shifted to another time in order to operate the active distribution system within secure operating limits. A simple mechanism is proposed for finding the flexibility of the loads where electric...

  11. Decision support program for congestion management using demand side flexibility

    DEFF Research Database (Denmark)

    Esmat, Ayman; Pinson, Pierre; Usaola, Julio

    2017-01-01

    In the past decades, Distribution System Operators (DSOs) have been mitigating distribution networks (DNs) contingencies by opting to grid reinforcements. However, this approach is not always cost and time efficient. Demand Side Flexibility (DSF) is one of the recent alternatives used in DNs cong...... effect is taken into consideration as well as the uncertain behavior of customers. Finally, the distribution grid of the Danish Bornholm Island is used to illustrate the merits of the DSP. The total cost incurred by the DSO is calculated and presented.......In the past decades, Distribution System Operators (DSOs) have been mitigating distribution networks (DNs) contingencies by opting to grid reinforcements. However, this approach is not always cost and time efficient. Demand Side Flexibility (DSF) is one of the recent alternatives used in DNs...... congestion management. Consequently, new market players such as aggregators are needed to handle DSF transaction between customers and DSOs. This paper proposes and models a decision support program (DSP) to optimize the total cost charged by the DSO for using DSF services. Moreover, the energy rebound...

  12. Deep Neural Network Based Demand Side Short Term Load Forecasting

    Directory of Open Access Journals (Sweden)

    Seunghyoung Ryu

    2016-12-01

    Full Text Available In the smart grid, one of the most important research areas is load forecasting; it spans from traditional time series analyses to recent machine learning approaches and mostly focuses on forecasting aggregated electricity consumption. However, the importance of demand side energy management, including individual load forecasting, is becoming critical. In this paper, we propose deep neural network (DNN-based load forecasting models and apply them to a demand side empirical load database. DNNs are trained in two different ways: a pre-training restricted Boltzmann machine and using the rectified linear unit without pre-training. DNN forecasting models are trained by individual customer’s electricity consumption data and regional meteorological elements. To verify the performance of DNNs, forecasting results are compared with a shallow neural network (SNN, a double seasonal Holt–Winters (DSHW model and the autoregressive integrated moving average (ARIMA. The mean absolute percentage error (MAPE and relative root mean square error (RRMSE are used for verification. Our results show that DNNs exhibit accurate and robust predictions compared to other forecasting models, e.g., MAPE and RRMSE are reduced by up to 17% and 22% compared to SNN and 9% and 29% compared to DSHW.

  13. Modeling and Analysis of Commercial Building Electrical Loads for Demand Side Management

    Science.gov (United States)

    Berardino, Jonathan

    In recent years there has been a push in the electric power industry for more customer involvement in the electricity markets. Traditionally the end user has played a passive role in the planning and operation of the power grid. However, many energy markets have begun opening up opportunities to consumers who wish to commit a certain amount of their electrical load under various demand side management programs. The potential benefits of more demand participation include reduced operating costs and new revenue opportunities for the consumer, as well as more reliable and secure operations for the utilities. The management of these load resources creates challenges and opportunities to the end user that were not present in previous market structures. This work examines the behavior of commercial-type building electrical loads and their capacity for supporting demand side management actions. This work is motivated by the need for accurate and dynamic tools to aid in the advancement of demand side operations. A dynamic load model is proposed for capturing the response of controllable building loads. Building-specific load forecasting techniques are developed, with particular focus paid to the integration of building management system (BMS) information. These approaches are tested using Drexel University building data. The application of building-specific load forecasts and dynamic load modeling to the optimal scheduling of multi-building systems in the energy market is proposed. Sources of potential load uncertainty are introduced in the proposed energy management problem formulation in order to investigate the impact on the resulting load schedule.

  14. Winning end users active support to demand side response

    Energy Technology Data Exchange (ETDEWEB)

    Osorio, Jose [Rede Electrica Nacional, S.A., Lisbon (Portugal); Estanqueiro, Ana [Laboratorio Nacional de Energia e Geologia (LNEG), Lisbon (Portugal)

    2012-07-01

    While objectives proposed for Smart Grids and Smart metering may seem to be able to win easily end user's supports, a considerable amount of studies on social behavior concerning energy efficiency and sustainability show the gap between the values people would like to fulfill and their real life performance. As TSOs envision here a source of System Ancillary Services, measures to make the source really dependable, so that an adequate market design may really work are pointed out. (orig.)

  15. Adaptive heat pump and battery storage demand side energy management

    Science.gov (United States)

    Sobieczky, Florian; Lettner, Christian; Natschläger, Thomas; Traxler, Patrick

    2017-11-01

    An adaptive linear model predictive control strategy is introduced for the problem of demand side energy management, involving a photovoltaic device, a battery, and a heat pump. Moreover, the heating influence of solar radiation via the glass house effect is considered. Global sunlight radiation intensity and the outside temperature are updated by weather forecast data. The identification is carried out after adapting to a time frame witch sufficiently homogeneous weather. In this way, in spite of the linearity an increase in precision and cost reduction of up to 46% is achieved. It is validated for an open and closed loop version of the MPC problem using real data of the ambient temperature and the global radiation.

  16. Indirect Control for Demand Side Management – A Conceptual Introduction

    DEFF Research Database (Denmark)

    Heussen, Kai; You, Shi; Biegel, Benjamin

    2012-01-01

    The concept of “indirect control” has become a relevant discussion term in relation to activation distributed and small-scale demand and generation units to provide resources for power system balancing. The term and its association with price signals has, however caused some confusion as to its...... correct definition, either as a control or a market concept. This paper aims to provide a conceptual introduction to "indirect control" for management of small and distributed demand side resources. A review of control concepts and an analysis of "indirectness" features are provided to create a framework...... for systematic classification of indirect control strategies. The concepts developed then enable a discussion of control performance and valuation of direct- and indirect control strategies....

  17. Real-Time Demand Side Management Algorithm Using Stochastic Optimization

    Directory of Open Access Journals (Sweden)

    Moses Amoasi Acquah

    2018-05-01

    Full Text Available A demand side management technique is deployed along with battery energy-storage systems (BESS to lower the electricity cost by mitigating the peak load of a building. Most of the existing methods rely on manual operation of the BESS, or even an elaborate building energy-management system resorting to a deterministic method that is susceptible to unforeseen growth in demand. In this study, we propose a real-time optimal operating strategy for BESS based on density demand forecast and stochastic optimization. This method takes into consideration uncertainties in demand when accounting for an optimal BESS schedule, making it robust compared to the deterministic case. The proposed method is verified and tested against existing algorithms. Data obtained from a real site in South Korea is used for verification and testing. The results show that the proposed method is effective, even for the cases where the forecasted demand deviates from the observed demand.

  18. Development of planning methods for demand-side management (DSM)

    International Nuclear Information System (INIS)

    Kaerkkaeinen, S.; Kekkonen, V.; Rissanen, P.

    1995-01-01

    The interest of utilities and governmental agencies in Demand-side management (IDSM) and Integrated Resource Planning (IRP) has increased during recent years also in Finland. From the governmental point of view, the main reason for this has been concern about the environmental effects of electricity supply and consumption. Utilities are mainly interested in cost reductions in electricity supply and distribution caused by DSM. Also improved service to the customer due to DSM has increasing value to utilities. In this project, the main target has been to develop and assess methods for DSM planning from the utility point of view. The final goal is to integrate these methods into the strategic planning of electric utilities

  19. An energy service company's perspective on demand-side management

    International Nuclear Information System (INIS)

    Bullock, C.G.

    1993-01-01

    In 1985, Massachusetts Electric Company held a bid for demand reduction to be supplied by energy service companies (ESCOs). It was one of the first demand-side management (DSM) bidding programs held in the United States. Since then, several DSM auctions have been held. Many people expected DSM bidding to be a key component in integrated resource planning. Many observed similarities with supply side bidding, and expected DSM bidding to grow according. Today, more than $2 billion annually is being spent by utilities on DSM programs. Less than $100 million is spent with ESCOs. This chapter explores some of the reasons for the current situation and suggests some alternatives, which could benefit all of the players

  20. Air pollution impacts from demand-side management

    International Nuclear Information System (INIS)

    Hall, D.C.; Sandii Win, M.; Hall, J.V.

    1995-01-01

    Air-polluting emission rates and energy-efficiency ratings vary widely among power plants, depending on location, age and whether the power plant is repowered. Traditional regulations require installation of specified emission control equipment that varies among power plants. These regulations do not specify that utilities first dispatch the cleanest power plants as demand varies from peak to off-peak periods. This empirical analysis shows, for 2 years out of 20, that demand-side management (DSM) programs increase air pollution. One reason for this result is that regulations require installation of specific emission-control technology but do not provide the incentive to take actual emissions or their air quality impacts into account when operating the system. For certain types of air pollutants and in some regions, regulatory programs now include markets for tradable emission credits. Such programs may alter this incentive. (author)

  1. Modeling Supermarket Refrigeration Systems for Demand-Side Management

    Directory of Open Access Journals (Sweden)

    Jakob Stoustrup

    2013-02-01

    Full Text Available Modeling of supermarket refrigeration systems for supervisory control in the smart grid is presented in this paper. A modular modeling approach is proposed in which each module is modeled and identified separately. The focus of the work is on estimating the power consumption of the system while estimating the cold reservoir temperatures as well. The models developed for each module as well as for the overall integrated system are validated by real data collected from a supermarket in Denmark. The results show that the model is able to estimate the actual electrical power consumption with a high fidelity. Moreover a simulation benchmark is introduced based on the produced model for demand-side management in smart grid. Finally, a potential application of the proposed benchmark in direct control of the power/energy consumption is presented by a simple simulation example.

  2. Intelligent demand side management of residential building energy systems

    Science.gov (United States)

    Sinha, Maruti N.

    Advent of modern sensing technologies, data processing capabilities and rising cost of energy are driving the implementation of intelligent systems in buildings and houses which constitute 41% of total energy consumption. The primary motivation has been to provide a framework for demand-side management and to improve overall reliability. The entire formulation is to be implemented on NILM (Non-Intrusive Load Monitoring System), a smart meter. This is going to play a vital role in the future of demand side management. Utilities have started deploying smart meters throughout the world which will essentially help to establish communication between utility and consumers. This research is focused on investigation of a suitable thermal model of residential house, building up control system and developing diagnostic and energy usage forecast tool. The present work has considered measurement based approach to pursue. Identification of building thermal parameters is the very first step towards developing performance measurement and controls. The proposed identification technique is PEM (Prediction Error Method) based, discrete state-space model. The two different models have been devised. First model is focused toward energy usage forecast and diagnostics. Here one of the novel idea has been investigated which takes integral of thermal capacity to identify thermal model of house. The purpose of second identification is to build up a model for control strategy. The controller should be able to take into account the weather forecast information, deal with the operating point constraints and at the same time minimize the energy consumption. To design an optimal controller, MPC (Model Predictive Control) scheme has been implemented instead of present thermostatic/hysteretic control. This is a receding horizon approach. Capability of the proposed schemes has also been investigated.

  3. A System Architecture for Autonomous Demand Side Load Management in Smart Buildings

    DEFF Research Database (Denmark)

    Costanzo, Giuseppe Tommaso; Zhu, Guchuan; Anjos, Miguel F.

    2012-01-01

    This paper presents a system architecture for load management in smart buildings which enables autonomous demand side load management in the smart grid. Being of a layered structure composed of three main modules for admission control, load balancing, and demand response management...... in multiple time-scales and allows seamless integration of diverse techniques for online operation control, optimal scheduling, and dynamic pricing. The design of a home energy manager based on this architecture is illustrated and the simulation results with Matlab/Simulink confirm the viability...

  4. New vision of demand side management strategy as the main tool in cooperation suppliers and consumers of electrical energy

    International Nuclear Information System (INIS)

    Szkutnik, J.

    2012-01-01

    The paper presents the complex proposal for the implementation of the demand side management in the Polish energy sector. The issue of demand side management is well known in the world, European and domestic dimensions. The experience of western countries shows that at least to some extent, the demand side management strategy is already implemented there. However, Polish experience is far too insufficient. Demand side management consists in efficient management of energy demand as well as adoption of this demand i.e. changing the load. The decrease of energy consumption in the moment of its peak demand leads to the balance between the demand and supply in the system, which influences the market price of energy. If certain mechanisms are implemented that will cause that final receivers will be willing to adjust their demand for energy, we will create the Demand Response, which is an efficient tool in the demand side management strategy. It is assumed that electronic meters will bring a real quality change. The undertakings based on initiatives of the Polish Energy Regulatory Office that promote the concept of implementation of electronic metering in the Polish energy sector prove that Poland is determined to improve its energy efficiency. The report describes the concept of the electronic meters that enables the realisation of the demand side management strategy as well as other complementary solutions that make the strategy even more efficient. In this field, it is planned to establish a dedicated loyalty programmes for energy receivers. The concept includes also the combination of the model solutions with the campaign 'energy efficiency' organised by the Ministry of Economy, which aims at fulfilling the requirements of the directive 2006/32/EC on energy end-use efficiency and energy services. As complementary solution in this new vision to add the system of recycling of waste heat home appliance devices. (Author)

  5. Evaluation of flexible demand-side load-following reserves in power systems with high wind generation penetration

    NARCIS (Netherlands)

    Paterakis, N.G.; Catalao, J.P.S.; Ntomaris, A.V.; Erdinc, O.

    2015-01-01

    In this study, a two-stage stochastic programming joint energy and reserve day-ahead market structure is proposed in order to procure the required load-following reserves to tackle with wind power production uncertainty. Reserves can be procured both from generation and demand-side. Responsive

  6. Who should pay for demand-side management programs?

    International Nuclear Information System (INIS)

    Flaim, T.

    1992-01-01

    Traditional utility resource planning involves taking the load forecast as a given and then determining the additional supply resources expected to serve that load at minimum cost and optimal levels of reliability. With integrated planning, the goal is still to balance supply and demand, but in a way that is most cost effective given all possible ways to serve customers' energy service needs. The new element in integrated resource planning is demand side management (DSM) or activities aimed at altering the quantity of energy customers use and/or the timing of their consumption. This paper discusses how DSM works to accomplish energy conservation and how it affects the rate structure. It also goes on to discuss how a utility can optimize the participation in a conservation program so that no particular group might have to carry the brunt of a rate increase. These suggestions include aligning rates to accurately reflect marginal costs; require participating customers to pay as many program costs as are possible; where participating customers can't pay full cost of a program, restrict costs to those groups who are eligible to participate; and offer a 'reverse shared-savings' program to the largest customers. The paper goes on to discuss electric-to-gas fuel switching and what customers should carry the cost burden for this type of switching

  7. Demand-side management pricing options in electric utilities

    International Nuclear Information System (INIS)

    Sardana, P.; Herman, P.

    1990-01-01

    In 1989 Ontario Hydro implemented optional time-of-use (TOU) rates at the wholesale level for all municipal utilities in the province. At the same time, mandatory TOU rates were implemented for large users (customers with loads in excess of 5 MW) served by municipal utilities and Ontario Hydro's direct customers. To fully explore the potential of rate structures as demand-side management (DSM) tools, Ontario Hydro retained a consulting firm to carry out a survey of innovative rate structures in other jurisdications. The survey was intended to identify: the status quo of rate structures in other jurisdictions that were designed specifically to encourage DSM; a profile of the cost basis of the rate structures, for example whether traditional embedded cost of service analyses or contentious methods such as marginal cost pricing were used; whether innovative rates have been successful, and customer reactions and attitudes; and how innovative rates fit into the overall strategy of the utilities. It was found that TOU, interruptible and end-use targeted rates are the rate structures of choice for many utilities. Most are concerned with deferring capacity, reducing peak demand, and shifting load out of peak periods. Most utilities report success with their programs and satisfaction with the present form of the programs. 5 tabs

  8. Economic profitability analysis of demand side management program

    International Nuclear Information System (INIS)

    Sheen, J.N.

    2005-01-01

    This study considers both the internal and external costs of the utility in deriving the avoided capacity cost (ACC) and avoided operating cost (AOC) induced in an electric utility caused by the implementation of a demand side management program (DSM). In calculating the ACC, a multiple objective linear programming model is developed. Meanwhile, the AOC is calculated by considering the differences between the total and specific time period energy consumption ratios before and after the implementation of the DSM program. This study also develops an economic analysis method using Net Present Value and Pay Back Year models to assess the economic profitability of implementing a DSM program from a participant's point of view. The design and construction of a partial load leveling eutectic salt Cooling Energy Storage (CES) air conditioning system in a target office building in Kaohsiung, Taiwan, is discussed in order to simulate the cost benefit of the CES system from the perspective of the utility and from that of the participant. The results confirm the effectiveness of the developed models in simulating the economic benefits of implementing a DSM program from the perspectives of both the utility and the participant

  9. The Wisconsin experience with incentives for demand-side management

    International Nuclear Information System (INIS)

    Landgren, D.A.

    1990-01-01

    It has been noted that, within traditional regulatory frameworks for electric utilities, factors exist which discourage demand side management (DSM) and that there is a lack of positive incentives for DSM. Regulatory agencies should therefore make it possible for DSM measures to benefit from the same treatment as supply-side measures. The Wisconsin Public Service Commission (WPSC) has recognized this need and has adopted various measures accordingly. The need for efficiency incentives is described according to the particular experience of Wisconsin Electric concerning their recourse to a DSM incentive and according to new incentive models being tested in collaboration with other electricity suppliers in Wisconsin. The WPSC has concluded that the fact of considering the costs relating to DSM as expenses or capitalizing them within the rate base does not motivate the utility to promote DSM programs. The WPSC has thus decided to experiment with energy efficiency incentives in order to evaluate their eventual impact. The choice of the type of incentive had an objective of starting the process in an area where the lack of experience has created, from the regulatory point of view, a reticence on the part of utilities to engage in DSM programs. The WPSC has designed a variety of incentive models which have been adapted to each utility's own situation. Specific incentive programs developed for three Wisconsin utilities are reviewed

  10. Demand side management at Enbridge and best practices in Canada

    Energy Technology Data Exchange (ETDEWEB)

    Hunt, K.; Griffin, B. [Enbridge Gas Distribution, Toronto, ON (Canada)

    2004-07-01

    In 1994, the Ontario Energy Board required that gas utilities implement DSM programs for all customers. Enbridge began delivering demand side management (DSM) programs in 1995. DSM is now fully integrated with marketing. DSM programs are delivered across the residential, commercial, industrial, and multi-residential sectors. In 1997, Enbridge introduced the Steam Saver Program for customers who own mid-sized and large steam boilers. The program is now saving customers over 41 million cubic metres of gas per year, representing over $10 million annually. Steam boiler plants burn 30 per cent of all fuel in Ontario. They include natural gas, oil, wood or coal. This paper included a table listing the annual fuel consumption and cost for 1,200 boiler plants in Ontario. The Steam Saver Program identified steam efficiency projects in the customer's plant, provided a business case for the customer and provided technical and financial help to implement the project. The average financial payback on steam efficiency projects is 1.7 years. This paper also described Enbridge's Natural Gas Construction Heater Program for new residential construction markets. The program promotes the benefits of natural gas construction heaters as an alternative to propane salamanders for curing concrete walls in basements, drywall drying, and thawing soil for basement floors before pouring concrete. The natural gas construction heaters are also more suitable for heating the home before a central furnace system is activated. 3 tabs., 6 figs.

  11. Electricity deregulation, spot price patterns and demand-side management

    International Nuclear Information System (INIS)

    Li, Y.; Flynn, P.C.

    2006-01-01

    This paper examines extensive hourly or half-hourly power price data from 14 deregulated power markets. It analyzes average diurnal patterns, relationship to system load, volatility, and consistency over time. Diurnal patterns indicate the average price spread between off-peak and on-peak and weekend vs. weekday power consumption. Volatility is measured by price velocity: the average normalized hourly change in power price, calculated daily. The calculated price velocity is broken down into an expected component that arises from the diurnal pattern and an unexpected component that arises from unknown factors. The analysis reveals significant differences among markets, suggesting that demand-side management (DSM) of power consumption is far more difficult in some markets than in others. At one extreme, Spain, Britain and Scandinavia show consistent diurnal price patterns, a stable relationship between price and system load, and a low unexplained component of price volatility. A power consumer in these markets could form a reasonable expectation of a reward for DSM of elective power consumption. At the other extreme, two markets in Australia show erratic diurnal price patterns from year to year, low correlation between price and system load, and a high amount of unexpected price velocity. A power consumer in these markets would have far greater difficulty in realizing a benefit from DSM. Markets that experienced one period of very high prices without a clear external cause, such as California and Alberta, appear to have a significant longer-term erosion of public support for deregulation. (author)

  12. Demand side management program evaluation based on industrial and commercial field data

    International Nuclear Information System (INIS)

    Eissa, M.M.

    2011-01-01

    Demand Response is increasingly viewed as an important tool for use by the electric utility industry in meeting the growing demand for electricity. There are two basic categories of demand response options: time varying retail tariffs and incentive Demand Response Programs. is applying the time varying retail tariffs program, which is not suitable according to the studied load curves captured from the industrial and commercial sectors. Different statistical studies on daily load curves for consumers connected to 22 kV lines are classified. The load curve criteria used for classification is based on peak ratio and night ratio. The data considered here is a set of 120 annual load curves corresponding to the electric power consumption (the western area in the King Saudi Arabia (KSA)) of many clients in winter and some months in the summer (peak period). The study is based on real data from several Saudi customer sectors in many geographical areas with larger commercial and industrial customers. The study proved that the suitable Demand Response for the ESC is the incentive program. - Highlights: → Study helps in selecting the proper demand side program. → A credit will be given for the customers during summer months. → Reduction in the electric bill. → Monthly bill credit is decreased based on customers' peak load reduction. → Guide for applying the proper demand side program suitable for the utility and customers.

  13. The impact of demand side management strategies in the penetration of renewable electricity

    International Nuclear Information System (INIS)

    Pina, André; Silva, Carlos; Ferrão, Paulo

    2012-01-01

    High fuel costs, increasing energy security and concerns with reducing emissions have pushed governments to invest in the use of renewable energies for electricity generation. However, the intermittence of most renewable resources when renewable energy provides a significant share of the energy mix can create problems to electricity grids, which can be minimized by energy storage systems that are usually not available or expensive. An alternative solution consists on the use of demand side management strategies, which can have the double effect of reducing electricity consumption and allowing greater efficiency and flexibility in the grid management, namely by enabling a better match between supply and demand. This work analyzes the impact of demand side management strategies in the evolution of the electricity mix of Flores Island in the Azores archipelago which is characterized by high shares of renewable energy and therefore the introduction of more renewable energy sources makes it an interesting case study for testing innovative solutions. The electricity generation system is modeled in TIMES, a software which optimizes the investment and operation of wind and hydro plants until 2020 based on scenarios for demand growth, deployment of demand response technologies in the domestic sector and promotion of behavioral changes to eliminate standby power. The results show that demand side management strategies can lead to a significant delay in the investment on new generation capacity from renewable resources and improve the operation of the existing installed capacity. -- Highlights: ► Energy efficiency can help reduce the need for investment in more renewable energy. ► Dynamic demand helps increase the use of renewable energy in low demand periods. ► Around 40% of total consumption by domestic appliances is used as dynamic demand. ► The load of domestic appliances is mainly shifted to the 5:00 to 9:00 period.

  14. Demand-side management and European environmental and energy goals: An optimal complementary approach

    International Nuclear Information System (INIS)

    Bergaentzlé, Claire; Clastres, Cédric; Khalfallah, Haikel

    2014-01-01

    Demand side management (DSM) in electricity markets could improve energy efficiency and achieve environmental targets through controlled consumption. For the past 10 years or so DSM programmes have registered significant results. However, detailed analysis of its real impact as observed by a large number of pilot studies suggests that such programmes need to be fine-tuned to suit clearly identified conditions. This study aims to provide recommendations for the instruments to be used to prompt demand response with a view to maximizing energy and environmental efficiencies of various countries. The present study suggests that different DSM models should be deployed depending on the specific generation mix in any given country. Beside the natural benefits from cross-borders infrastructures, DSM improves the flexibility and reliability of the energy system, absorbing some shock on generation mix. We show efficiency increases with demand response but at a decreasing rate. So, according to rebound and report effects, simple DSM tools could be preferred. - Highlights: • Demand side management could improve energy and environmental efficiency. • Several instruments should be used to achieve significant load-shedding. • DSM models should be deployed depending on generation mix. • Efficiency increases with demand response but at a decreasing rate. • Rebound and report effects reduce positive impacts

  15. Effects of utility demand-side management programs on uncertainty

    International Nuclear Information System (INIS)

    Hirst, E.

    1994-01-01

    Electric utilities face a variety of uncertainties that complicate their long-term resource planning. These uncertainties include future economic and load growths, fuel prices, environmental and economic regulations, performance of existing power plants, cost and availability of purchased power, and the costs and performance of new demand and supply resources. As utilities increasingly turn to demand-side management (DSM) programs to provide resources, it becomes more important to analyze the interactions between these programs and the uncertainties facing utilities. This paper uses a dynamic planning model to quantify the uncertainty effects of supply-only vs DSM + supply resource portfolios. The analysis considers four sets of uncertainties: economic growth, fuel prices, the costs to build new power plants, and the costs to operate DSM programs. The two types of portfolios are tested against these four sets of uncertainties for the period 1990 to 2010. Sensitivity, scenario, and worst-case analysis methods are used. The sensitivity analyses show that the DSM + supply resource portfolio is less sensitive to unanticipated changes in economic growth, fuel prices, and power-plant construction costs than is the supply-only portfolio. The supply-only resource mix is better only with respect to uncertainties about the costs of DSM programs. The base-case analysis shows that including DSM programs in the utility's resource portfolio reduces the net present value of revenue requirements (NPV-RR) by 490 million dollars. The scenario-analysis results show an additional 30 million dollars (6%) in benefits associated with reduction in these uncertainties. In the worst-case analysis, the DSM + supply portfolio again reduces the cost penalty associated with guessing wrong for both cases, when the utility plans for high needs and learns it has low needs and vice versa. 20 refs

  16. Demand-side management process evaluations - the management perspective

    International Nuclear Information System (INIS)

    Perrault, G.A.; Barrett, L.B.

    1993-01-01

    A demand-side management (DSM) process evaluation is a qualitative, expert assessment of how a utility marketing program is being conducted. It reviews the efficiency and effectiveness in which a utility plans, manages, executes, and monitors the delivery of DSM programs to its marketplace. Process evaluations,which includes load impact, customer satisfaction and cost-effectiveness analysis, are becoming an increasingly significant component. The process evaluation focus is on the program planning and delivery process as opposed to the energy impacts resulting from the specific measures or products of the program. Because of this process-oriented focus, such evaluations can identify important opportunities for improving the cost-effectiveness of a program without significantly changing product lines. The evaluation may identify administrative or delivery process improvements. In addition, the evaluation may identify ways of improving the degree to which the customer is satisfied with the program or the utility. Since process evaluations are usually conducted as part of a utility's mandated DSM measurement and evaluation plan, they tend to focus mainly on the stated needs of the regulator as opposed to company management. This can be a problem. Although the regulatory perspective is important, in an increasingly competitive business environment, utilities must not overlook management's business and operational needs for specific information regarding DSM program planning, control, execution, and evaluation. This paper discusses some of the conflicts that exist between the regulator's and management's needs for DSM program evaluation results and presents some approaches for assuring that both needs are met. It is organized to first discuss the scope of a process evaluation, then the evaluation issues, the management concerns, and finally reporting of results

  17. Review of US utility demand-side bidding programs

    International Nuclear Information System (INIS)

    Goldman, C.A.; Kito, M.S.

    1995-01-01

    In this study, we review utility experiences with demand-side management (DSM) bidding programs. Since 1987, about 35 US utilities have signed long-term contracts with developers of DSM resources (ie energy service companies and customers) to provide a quantity of demand and energy savings at specified prices. Total resource costs range between 5.4 and 8 cents/kWh for DSM bidding programs where complete information on program costs is available. Almost all DSM bidding programs have been cost-effective compared with the utility's own supply-side alternatives, although there is substantial disagreement regarding the value of these programs compared with the utility's own DSM programs. In most bidding programs, payments to bidders account for between 70 and 90% of total program costs. Variation in winning bid prices is influenced primarily by DSM bid ceiling prices, differences in the mix of measures and markets targeted by developers, and the degree of performance risk borne by the DSM developer. Bids targeting residential customers averaged 6.2 cents/kWh compared with about 5.0 cents/kWh for commercial/industrial bids. We also compared the costs of acquiring lighting savings in DSM bidding contracts with a sample of 20 utility sponsored commercial/industrial lighting programs. We found that, on average total resource costs were slightly higher in bidding programs (6.1 vs 5.6 cents/kWh), although ratepayers bear significantly less performance risk in bidding programs compared with traditional utility-sponsored DSM programs. (author)

  18. Power System Transient Stability Improvement Using Demand Side Management in Competitive Electricity Markets

    DEFF Research Database (Denmark)

    Hu, Weihao; Wang, Chunqi; Chen, Zhe

    2012-01-01

    Since the hourly spot market price is available one day ahead in Denmark, the price could be transferred to the consumers and they may shift some of their loads from high price periods to the low price periods in order to save their energy costs. The optimal load response to an electricity price...... for demand side management generates different load profiles and may provide an opportunity to improve the transient stability of power systems with high wind power penetrations. In this paper, the idea of the power system transient stability improvement by using optimal load response to the electricity...... price is proposed. A 102-bus power system which represents a simplified model of the western Danish power system is chosen as the study case. Simulation results show that the optimal load response to electricity prices is an effective measure to improve the power system transient stability with high...

  19. Demand-Side Management and European environmental and energy goals. An optimal complementary approach

    International Nuclear Information System (INIS)

    Bergaentzle, Claire; Clastres, Cedric; Khalfallah, Haikel

    2013-12-01

    Demand side management (DSM) in electricity markets could improve energy efficiency and achieve environmental targets through controlled consumption. For the past 10 years or so DSM programs have registered significant results. However, detailed analysis of its real impact as observed by a large number of pilot studies suggests that such programs need to be fine-tuned to suit clearly identified conditions. This study aims to provide recommendations for the instruments to be used to prompt demand response with a view to maximizing energy and environmental efficiencies of various countries. The present study suggests that different DSM models should be deployed depending on the specific generation mix in any given country. Beside the natural benefits from cross-borders infrastructures, DSM improves the flexibility and reliability of the energy system, absorbing some shock on generation mix. We show efficiency increases with demand response but at a decreasing rate. So, according to rebound and report effects, simple DSM tools could be preferred. (authors)

  20. Demand side participation for frequency containment in the web of cells architecture

    NARCIS (Netherlands)

    Syed, M.H.; Burt, G.M.; Kok, J.K.; Hulst, R. d

    2015-01-01

    A large number of demand side management schemes have been proposed in literature for provision of frequency control ancillary services to the network. However, it is assumed that all the flexible devices within the network are managed and controlled under one demand side management (DSM) scheme. In

  1. Assessing the potential of residential HVAC systems for demand-side management

    NARCIS (Netherlands)

    van der Klauw, Thijs; Hoogsteen, Gerwin; Gerards, Marco Egbertus Theodorus; Hurink, Johann L.; Feng, Xianyong; Hebner, Robert E.

    This paper investigates the potential of residential heating, ventilation and air conditioning systems to contribute to dynamic demand-side management. Thermal models for seven houses in Austin, Texas are developed with the goal of using them in a planning based demand-side management methodology.

  2. Predictive Control of Demand Side Units Participating in the Primary Frequency Reserve Market

    DEFF Research Database (Denmark)

    Biegel, Benjamin; Stoustrup, Jakob; Andersen, Palle

    2013-01-01

    We consider an aggregator controlling a mixed portfolio of conventional power generators and demand side units. The generators are controllable within certain power and ramp limitations while the demand side units are characterized by flexible consumptions and therefore can be treated as energy...

  3. Industrial demand-side management in Canada. In the market for competition

    International Nuclear Information System (INIS)

    Fleming, A.

    1995-01-01

    The requirement for demand-side management brought on by increased competitiveness, a consequence of the deregulation of Canadian electric utilities, was discussed. Options for demand-side management were presented. The effect of deregulation on making demand-side management and energy efficiency high priorities in industry was discussed. Coordinated efforts of Power Smart Inc. and utilities in promoting energy efficiency were claimed to be the key to the success of demand-side management in the electric power industry in Canada. Demand-side management programs were expected to enhance productivity of industry by maximizing the value of plant energy use, and by providing industrial customers with a higher level of customer service

  4. Employee retention and integrated disability management practices as demand side factors.

    Science.gov (United States)

    Habeck, Rochelle; Hunt, Allan; Rachel, Colleen Head; Kregel, John; Chan, Fong

    2010-12-01

    Demand-side employment research on company policies and practices related to retention and absence and disability management (ADM) can contribute to our understanding of employment issues related to people with disabilities from the employers' perspective. To examine company ADM and retention practices and their effectiveness, as well as how these company policies and practices might influence hiring of people with disabilities. Disability Management Employer Coalition employer members (N = 650) were surveyed by internet and the survey data were analyzed using descriptive statistics, correlation, and multiple regression. Ninety-five participants responded to the survey resulting in a response rate of 14%. Retention practice was found to be associated with retention effectiveness (r = .39, P ideas and involvement of employees, and assuring they know how their work and performance support the mission. ADM practice was related to improving health and managing health conditions (r = .26, P companies.

  5. Demand-Side Energy Management Based on Nonconvex Optimization in Smart Grid

    Directory of Open Access Journals (Sweden)

    Kai Ma

    2017-10-01

    Full Text Available Demand-side energy management is used for regulating the consumers’ energy usage in smart grid. With the guidance of the grid’s price policy, the consumers can change their energy consumption in response. The objective of this study is jointly optimizing the load status and electric supply, in order to make a tradeoff between the electric cost and the thermal comfort. The problem is formulated into a nonconvex optimization model. The multiplier method is used to solve the constrained optimization, and the objective function is transformed to the augmented Lagrangian function without constraints. Hence, the Powell direction acceleration method with advance and retreat is applied to solve the unconstrained optimization. Numerical results show that the proposed algorithm can achieve the balance between the electric supply and demand, and the optimization variables converge to the optimum.

  6. Managing Sustainable Demand-side Infrastructure for Power System Ancillary Services

    Science.gov (United States)

    Parkinson, Simon Christopher

    Widespread access to renewable electricity is seen as a viable method to mitigate carbon emissions, although problematic are the issues associated with the integration of the generation systems within current power system configurations. Wind power plants are the primary large-scale renewable generation technology applied globally, but display considerable short-term supply variability that is difficult to predict. Power systems are currently not designed to operate under these conditions, and results in the need to increase operating reserve in order to guarantee stability. Often, operating conventional generation as reserve is both technically and economically inefficient, which can overshadow positive benefits associated with renewable energy exploitation. The purpose of this thesis is to introduce and assess an alternative method of enhancing power system operations through the control of electric loads. In particular, this thesis focuses on managing highly-distributed sustainable demand-side infrastructure, in the form of heat pumps, electric vehicles, and electrolyzers, as dispatchable short-term energy balancing resources. The main contribution of the thesis is an optimal control strategy capable of simultaneously balancing grid- and demand-side objectives. The viability of the load control strategy is assessed through model-based simulations that explicitly track end-use functionality of responsive devices within a power systems analysis typically implemented to observe the effects of integrated wind energy systems. Results indicate that there is great potential for the proposed method to displace the need for increased reserve capacity in systems considering a high penetration of wind energy, thereby allowing conventional generation to operate more efficiently and avoid the need for possible capacity expansions.

  7. Demand side resource operation on the Irish power system with high wind power penetration

    International Nuclear Information System (INIS)

    Keane, A.; Tuohy, A.; Meibom, P.; Denny, E.; Flynn, D.; Mullane, A.; O'Malley, M.

    2011-01-01

    The utilisation of demand side resources is set to increase over the coming years with the advent of advanced metering infrastructure, home area networks and the promotion of increased energy efficiency. Demand side resources are proposed as an energy resource that, through aggregation, can form part of the power system plant mix and contribute to the flexible operation of a power system. A model for demand side resources is proposed here that captures its key characteristics for commitment and dispatch calculations. The model is tested on the all island Irish power system, and the operation of the model is simulated over one year in both a stochastic and deterministic mode, to illustrate the impact of wind and load uncertainty. The results illustrate that demand side resources can contribute to the efficient, flexible operation of systems with high penetrations of wind by replacing some of the functions of conventional peaking plant. Demand side resources are also shown to be capable of improving the reliability of the system, with reserve capability identified as a key requirement in this respect. - Highlights: → Demand side resource model presented for use in unit commitment and dispatch calculations. → Benefits of demand side aggregation demonstrated specifically as a peaking unit and provider of reserve. → Potential to displace or defer construction of conventional peaking units.

  8. Directed graph based carbon flow tracing for demand side carbon obligation allocation

    DEFF Research Database (Denmark)

    Sun, Tao; Feng, Donghan; Ding, Teng

    2016-01-01

    In order to achieve carbon emission abatement, some researchers and policy makers have cast their focus on demand side carbon abatement potentials. This paper addresses the problem of carbon flow calculation in power systems and carbon obligation allocation at demand side. A directed graph based...... method for tracing carbon flow is proposed. In a lossy network, matrices such as carbon losses, net carbon intensity (NCI) and footprint carbon intensity (FCI) are obtained with the proposed method and used to allocate carbon obligation at demand side. Case studies based on realistic distribution...... and transmission systems are provided to demonstrate the effectiveness of the proposed method....

  9. Supply-side and demand-side policies for biosimilars: an overview in 10 European member states.

    Science.gov (United States)

    Rémuzat, Cécile; Kapuśniak, Anna; Caban, Aleksandra; Ionescu, Dan; Radière, Guerric; Mendoza, Cyril; Toumi, Mondher

    2017-01-01

    This study aimed to provide an overview of biosimilar policies in 10 EU MSs. Methods : Ten EU MS pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK) were selected. A comprehensive literature review was performed to identify supply-side and demand-side policies in place in the selected countries. Results : Supply-side policies for biosimilars commonly include price linkage, price re-evaluation, and tendering; the use of internal or external reference pricing varies between countries; health technology assessment is conducted in six countries. Regarding demand-side policies, pharmaceutical prescription budgets or quotas and monitoring of prescriptions (with potential financial incentives or penalties) are in place in eight and in seven countries respectively. Switching is generally allowed, but is solely the physician's responsibility. Automatic substitution is not recommended, or even forbidden, in most EU MSs. Prescription conditions or guidelines that apply to biosimilars are established in nearly all surveyed EU MSs. Conclusions : Important heterogeneity in policies on biosimilars was seen between (and even within) selected countries, which may partly explain variations in biosimilar uptake. Supply-side policies targeting price have been reported to limit biosimilar penetration in the long term, despite short-term savings, while demand-side policies are considered to positively impact uptake.

  10. Supply-side and demand-side policies for biosimilars: an overview in 10 European member states

    Science.gov (United States)

    Rémuzat, Cécile; Kapuśniak, Anna; Caban, Aleksandra; Ionescu, Dan; Radière, Guerric; Mendoza, Cyril; Toumi, Mondher

    2017-01-01

    ABSTRACT Objective: This study aimed to provide an overview of biosimilar policies in 10 EU MSs. Methods: Ten EU MS pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK) were selected. A comprehensive literature review was performed to identify supply-side and demand-side policies in place in the selected countries. Results: Supply-side policies for biosimilars commonly include price linkage, price re-evaluation, and tendering; the use of internal or external reference pricing varies between countries; health technology assessment is conducted in six countries. Regarding demand-side policies, pharmaceutical prescription budgets or quotas and monitoring of prescriptions (with potential financial incentives or penalties) are in place in eight and in seven countries respectively. Switching is generally allowed, but is solely the physician’s responsibility. Automatic substitution is not recommended, or even forbidden, in most EU MSs. Prescription conditions or guidelines that apply to biosimilars are established in nearly all surveyed EU MSs. Conclusions: Important heterogeneity in policies on biosimilars was seen between (and even within) selected countries, which may partly explain variations in biosimilar uptake. Supply-side policies targeting price have been reported to limit biosimilar penetration in the long term, despite short-term savings, while demand-side policies are considered to positively impact uptake. PMID:28740617

  11. Assessment of utility side financial benefits of demand side management considering environmental impacts

    Science.gov (United States)

    Abeygunawardane, Saranga Kumudu

    2018-02-01

    Any electrical utility prefers to implement demand side management and change the shape of the demand curve in a beneficial manner. This paper aims to assess the financial gains (or losses) to the generating sector through the implementation of demand side management programs. An optimization algorithm is developed to find the optimal generation mix that minimizes the daily total generating cost. This daily total generating cost includes the daily generating cost as well as the environmental damage cost. The proposed optimization algorithm is used to find the daily total generating cost for the base case and for several demand side management programs using the data obtained from the Sri Lankan power system. Results obtained for DSM programs are compared with the results obtained for the base case to assess the financial benefits of demand side management to the generating sector.

  12. Impacts of Demand-Side Resources on Electric Transmission Planning

    Energy Technology Data Exchange (ETDEWEB)

    Hadley, Stanton W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Sanstad, Alan H. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2015-01-01

    Will demand resources such as energy efficiency (EE), demand response (DR), and distributed generation (DG) have an impact on electricity transmission requirements? Five drivers for transmission expansion are discussed: interconnection, reliability, economics, replacement, and policy. With that background, we review the results of a set of transmission studies that were conducted between 2010 and 2013 by electricity regulators, industry representatives, and other stakeholders in the three physical interconnections within the United States. These broad-based studies were funded by the US Department of Energy and included scenarios of reduced load growth due to EE, DR, and DG. While the studies were independent and used different modeling tools and interconnect-specific assumptions, all provided valuable results and insights. However, some caveats exist. Demand resources were evaluated in conjunction with other factors, and limitations on transmission additions between scenarios made understanding the role of demand resources difficult. One study, the western study, included analyses over both 10- and 20-year planning horizons; the 10-year analysis did not show near-term reductions in transmission, but the 20-year indicated fewer transmission additions, yielding a 36percent capital cost reduction. In the eastern study the reductions in demand largely led to reductions in local generation capacity and an increased opportunity for low-cost and renewable generation to export to other regions. The Texas study evaluated generation changes due to demand, and is in the process of examining demand resource impacts on transmission.

  13. Integrating Demand-Side Resources into the Electric Grid: Economic and Environmental Considerations

    Science.gov (United States)

    Fisher, Michael J.

    Demand-side resources are taking an increasingly prominent role in providing essential grid services once provided by thermal power plants. This thesis considers the economic feasibility and environmental effects of integrating demand-side resources into the electric grid with consideration given to the diversity of market and environmental conditions that can affect their behavior. Chapter 2 explores the private economics and system-level carbon dioxide reduction when using demand response for spinning reserve. Steady end uses like lighting are more than twice as profitable as seasonal end uses because spinning reserve is needed year-round. Avoided carbon emission damages from using demand response instead of fossil fuel generation for spinning reserve are sufficient to justify incentives for demand response resources. Chapter 3 quantifies the system-level net emissions rate and private economics of behind-the-meter energy storage. Net emission rates are lower than marginal emission rates for power plants and in-line with estimates of net emission rates from grid-level storage. The economics are favorable for many buildings in regions with high demand charges like California and New York, even without subsidies. Future penetration into regions with average charges like Pennsylvania will depend greatly on installation cost reductions and wholesale prices for ancillary services. Chapter 4 outlines a novel econometric model to quantify potential revenues from energy storage that reduces demand charges. The model is based on a novel predictive metric that is derived from the building's load profile. Normalized revenue estimates are independent of the power capacity of the battery holding other performance characteristics equal, which can be used to calculate the profit-maximizing storage size. Chapter 5 analyzes the economic feasibility of flow batteries in the commercial and industrial market. Flow batteries at a 4-hour duration must be less expensive on a dollar per

  14. A Virtual Power Plant Architecture for the Demand-Side Management of Smart Prosumers

    Directory of Open Access Journals (Sweden)

    Marco Pasetti

    2018-03-01

    Full Text Available In this paper, we present a conceptual study on a Virtual Power Plant (VPP architecture for the optimal management of Distributed Energy Resources (DERs owned by prosumers participating in Demand-Side Management (DSM programs. Compared to classical VPP architectures, which aim to aggregate several DERs dispersed throughout the electrical grid, in the proposed VPP architecture the supervised physical domain is limited to single users, i.e., to single Points of Delivery (PODs of the distribution network. The VPP architecture is based on a service-oriented approach, where multiple agents cooperate to implement the optimal management of the prosumer’s assets, by also considering different forms of Demand Response (DR requests. The considered DR schemes range from Price-Based DRs to Event-Based DRs, covering both the normal operating functions and the emergency control requests applied in modern distribution networks. With respect to centralized approaches, in this study the control perspective is moved from the system level to the single prosumer’s level, who is allowed to independently provide flexible power profiles through the aggregation of multiple DERs. A generalized optimization model, formulated as a Mixed-Integer Linear Programming (MILP problem, is also introduced. Such a model is able to compute the optimal scheduling of a prosumer’s assets by considering both DR requests and end-users’ requirements in terms of comfort levels while minimizing the costs.

  15. The past, present, and future of U.S. utility demand-side management programs

    International Nuclear Information System (INIS)

    Eto, J.

    1996-12-01

    Demand-side management or DSM refers to active efforts by electric and gas utilities to modify customers' energy use patterns. The experience in the US shows that utilities, when provided with appropriate incentives, can provide a powerful stimulus to energy efficiency in the private sector. This paper describes the range and history of DSM programs offered by US electric utilities, with a focus on the political, economic, and regulatory events that have shaped their evolution. It also describes the changes these programs are undergoing as a result of US electricity industry restructuring. DSM programs began modestly in the 1970s in response to growing concerns about dependence on foreign sources of oil and environmental consequences of electricity generation, especially nuclear power. The foundation for the unique US partnership between government and utility interests can be traced first to the private-ownership structure of the vertically integrated electricity industry and second to the monopoly franchise granted by state regulators. Electricity industry restructuring calls into question both of these basic conditions, and thus the future of utility DSM programs for the public interest. Future policies guiding ratepayer-funded energy-efficiency DSM programs will need to pay close attention to the specific market objectives of the programs and to the balance between public and private interests

  16. Demand-side management (DSM) in the context of China's on-going power sector reform

    International Nuclear Information System (INIS)

    Zhang, Sufang; Jiao, Yiqian; Chen, Wenjun

    2017-01-01

    As an approach to manage power demand-side resources, DSM plays an important role in electric power system. Though DSM was introduced into China in the early 1990s, its benefits have been underutilized. Using literature study, interview methods and three data sources, this paper examines the likely impacts of China's on-going power sector reform on its DSM. It finds that the major constraints to DSM in China are the insufficient and improper market-based DSM mechanism, grid companies’ low motivations for DSM due to their traditional business model, the underdeveloped energy service industry, and electricity end-users’ low motivation for DSM. China's on-going power sector reform will change power transmission and distribution pricing and grid companies’ business model and introduce competition into retail-side. Drawing on these findings, it is concluded that the likely impacts of the new reform on DSM are: governments may attach more importance to DSM; grid companies may have more motivations for DSM investment; electricity end-users’ motivations for DSM may be both enhanced and dampened; electricity retailers’ motivations for DSM may be dampened; demand response application may be enhanced, and more DSM business models may be developed. Finally, policy implications are provided. - Highlights: • Mechanism of and constraints to DSM in China are examined. • China’s on-going power sector reform is overviewed. • DSM is likely to be enhanced under China's on-going power sector reform. • Policy implications are provided.

  17. The past, present, and future of U.S. utility demand-side management programs

    Energy Technology Data Exchange (ETDEWEB)

    Eto, J. [Lawrence Berkeley National Lab., CA (United States). Environmental Energy Technologies Div.

    1996-12-01

    Demand-side management or DSM refers to active efforts by electric and gas utilities to modify customers` energy use patterns. The experience in the US shows that utilities, when provided with appropriate incentives, can provide a powerful stimulus to energy efficiency in the private sector. This paper describes the range and history of DSM programs offered by US electric utilities, with a focus on the political, economic, and regulatory events that have shaped their evolution. It also describes the changes these programs are undergoing as a result of US electricity industry restructuring. DSM programs began modestly in the 1970s in response to growing concerns about dependence on foreign sources of oil and environmental consequences of electricity generation, especially nuclear power. The foundation for the unique US partnership between government and utility interests can be traced first to the private-ownership structure of the vertically integrated electricity industry and second to the monopoly franchise granted by state regulators. Electricity industry restructuring calls into question both of these basic conditions, and thus the future of utility DSM programs for the public interest. Future policies guiding ratepayer-funded energy-efficiency DSM programs will need to pay close attention to the specific market objectives of the programs and to the balance between public and private interests.

  18. Neural network controller for Active Demand-Side Management with PV energy in the residential sector

    International Nuclear Information System (INIS)

    Matallanas, E.; Castillo-Cagigal, M.; Gutiérrez, A.; Monasterio-Huelin, F.; Caamaño-Martín, E.; Masa, D.; Jiménez-Leube, J.

    2012-01-01

    Highlights: ► We have developed a neural controller for Active Demand-Side Management. ► The controller consists of Multilayer Perceptrons evolved with a genetic algorithm. ► The architecture of the controller is distributed and modular. ► The simulations show that the electrical local behavior improves. ► Active Demand-Side Management helps users to control his energy behaviour. -- Abstract: In this paper, we describe the development of a control system for Demand-Side Management in the residential sector with Distributed Generation. The electrical system under study incorporates local PV energy generation, an electricity storage system, connection to the grid and a home automation system. The distributed control system is composed of two modules: a scheduler and a coordinator, both implemented with neural networks. The control system enhances the local energy performance, scheduling the tasks demanded by the user and maximizing the use of local generation.

  19. The electric energy demand-side planning: necessity and possibilities of execution

    International Nuclear Information System (INIS)

    Sposito, E.S.

    1991-05-01

    Aiming at reducing the level of investments, is presented a demand-side planning approach, divided into two parts. The first part is an analysis on the actual need of our demand-side approaching. In view of this, is showed a set of data and comments both on economic and technological aspects concerning the electric network and sector, as well as evaluation of the social, ecological and financial aspects which could act against the full expansion of the electric system. In the second part, a demand-side planning methodology is introduced, as well as its main concepts, its variables and its instruments of affecting the demand: energy conservation, replacement of sources, reduction of losses and electric power decentralized generation. Each of them is fully detailed in a set of planning policies and actions. Concluding is presented the basic elements of a National Electric Energy Substitution and Conservation Plan - PLANSCON. (author)

  20. Demand side resource operation on the Irish power system with high wind power penetration

    DEFF Research Database (Denmark)

    Keane, A.; Tuohy, A.; Meibom, Peter

    2011-01-01

    part of the power system plant mix and contribute to the flexible operation of a power system. A model for demand side resources is proposed here that captures its key characteristics for commitment and dispatch calculations. The model is tested on the all island Irish power system, and the operation...... of the functions of conventional peaking plant. Demand side resources are also shown to be capable of improving the reliability of the system, with reserve capability identified as a key requirement in this respect....... of the model is simulated over one year in both a stochastic and deterministic mode, to illustrate the impact of wind and load uncertainty. The results illustrate that demand side resources can contribute to the efficient, flexible operation of systems with high penetrations of wind by replacing some...

  1. The Demand Side in Economic Models of Energy Markets: The Challenge of Representing Consumer Behavior

    International Nuclear Information System (INIS)

    Krysiak, Frank C.; Weigt, Hannes

    2015-01-01

    Energy models play an increasing role in the ongoing energy transition processes either as tools for forecasting potential developments or for assessments of policy and market design options. In recent years, these models have increased in scope and scale and provide a reasonable representation of the energy supply side, technological aspects and general macroeconomic interactions. However, the representation of the demand side and consumer behavior has remained rather simplistic. The objective of this paper is twofold. First, we review existing large-scale energy model approaches, namely bottom-up and top-down models, with respect to their demand-side representation. Second, we identify gaps in existing approaches and draft potential pathways to account for a more detailed demand-side and behavior representation in energy modeling.

  2. The Demand Side in Economic Models of Energy Markets: The Challenge of Representing Consumer Behavior

    Energy Technology Data Exchange (ETDEWEB)

    Krysiak, Frank C., E-mail: frank.krysiak@unibas.ch; Weigt, Hannes [Department of Business and Economics, University of Basel, Basel (Switzerland)

    2015-05-19

    Energy models play an increasing role in the ongoing energy transition processes either as tools for forecasting potential developments or for assessments of policy and market design options. In recent years, these models have increased in scope and scale and provide a reasonable representation of the energy supply side, technological aspects and general macroeconomic interactions. However, the representation of the demand side and consumer behavior has remained rather simplistic. The objective of this paper is twofold. First, we review existing large-scale energy model approaches, namely bottom-up and top-down models, with respect to their demand-side representation. Second, we identify gaps in existing approaches and draft potential pathways to account for a more detailed demand-side and behavior representation in energy modeling.

  3. The Demand Side in Economic Models of Energy Markets: The Challenge of Representing Consumer Behavior

    Directory of Open Access Journals (Sweden)

    Frank eKrysiak

    2015-05-01

    Full Text Available Energy models play an increasing role in the ongoing energy transition processes either as tools for forecasting potential developments or for assessments of policy and market design options. In recent years these models have increased in scope and scale and provide a reasonable representation of the energy supply side, technological aspects and general macroeconomic interactions. However, the representation of the demand side and consumer behavior has remained rather simplistic. The objective of this paper is twofold. First, we review existing large scale energy model approaches, namely bottom-up and top-down models, with respect to their demand side representation. Second, we identify gaps in existing approaches and draft potential pathways to account for a more detailed demand side and behavior representation in energy modeling.

  4. New Real-Time Market Facilitating Demand-Side Resources for System Balancing

    DEFF Research Database (Denmark)

    Feng, Donghan; Nyeng, Preben; Xie, Jun

    2011-01-01

    Many demand side resources have the potential to provide fast and low cost balancing services. Switching these devices on and off can be executed in seconds and have limited consequences for the customers if the duration is not long. With carefully designed market rules, tens of thousands...... the participation of demand-side resources. In light of the future environment of increasing intermittent renewable power and distributed energy/storage resources, stochastic time-series and Monte-Carlo simulation are used to analyze the relationship between balancing requirement and generation/demand uncertainties...

  5. Barriers and Opportunities to Broader Adoption of Integrated Demand Side Management at Electric Utilities: A Scoping Study

    Energy Technology Data Exchange (ETDEWEB)

    Potter, Jennifer [Hawaii Natural Energy Institute, Honolulu, HI (United States); Stuart, Elizabeth [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.; Cappers, P [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Div.

    2018-02-13

    Integrated demand-side management (IDSM) is a strategic approach to designing and delivering a portfolio of demand side management (DSM) programs to customers. IDSM typically delivers customer centric strategies with the goal of increasing the amount of DSM in the field, but doing so in a way that integrates various measures and technologies to improve their collective performance and/or penetration. Specifically, IDSM can be defined as the integrated or coordinated delivery of three or more of: (1) energy efficiency (EE), (2) demand response (DR), (3) distributed generation (DG), (4) storage, (5) electric vehicle (EV) technologies, and (6) time-based rate programs to residential and commercial electric utility customers. The electric industry’s limited experience deploying IDSM to date suggests that significant barriers may exist. A Berkeley Lab report “Barriers and Opportunities to Broader Adoption of Integrated Demand Side Management at Electric Utilities: A Scoping Study” explores recent electric utility experience with IDSM to provide an assessment of the barriers and potential benefits perceived or experienced by program administrators in their attempts to implement integrated programs. The research draws on surveys and interviews with eleven staff from a sample of eight DSM program administrators and program implementers who were currently implementing or had previously attempted to implement an IDSM program or initiative. Respondents provided their perspectives on drivers for IDSM and barriers to broader deployment. They also reported on actions they had undertaken to promote expanded delivery of IDSM and provided their assessments of the most important under-tapped opportunities for expanding IDSM efforts, both for program administrator and regulatory organizations.

  6. Demand side management in households. Potentials and restraints of short-term power supply; Demand Side Management in Haushalten. Potenziale und Hemmnisse fuer kurzfristige Leistungsbereitstellung

    Energy Technology Data Exchange (ETDEWEB)

    Roon, Serafin von; Gobmaier, Thomas [FfE Forschungsstelle fuer Energiewirtschaft e.V., Muenchen (Germany); Huck, Malte

    2010-07-01

    Within the project ''Wind energy - balancing forecast errors'' we examine potentials, restraints and costs of various options for balancing forecast errors of wind power generation. One possibility of providing this backup power could be to practice Demand Side Management (DSM) of household appliances. The integration of these appliances in a DSM network is facilitated by standardized data transmission procedures and the increasing deployment of microprocessors. Due to the low power consumption of the switchable devices no DSM measures are implemented in the household sector so far, despite the numerous appliances. (orig.)

  7. Demand Side Management in Nearly Zero Energy Buildings Using Heuristic Optimizations

    Directory of Open Access Journals (Sweden)

    Nadeem Javaid

    2017-08-01

    Full Text Available Today’s buildings are responsible for about 40% of total energy consumption and 30–40% of carbon emissions, which are key concerns for the sustainable development of any society. The excessive usage of grid energy raises sustainability issues in the face of global changes, such as climate change, population, economic growths, etc. Traditionally, the power systems that deliver this commodity are fuel operated and lead towards high carbon emissions and global warming. To overcome these issues, the recent concept of the nearly zero energy building (nZEB has attracted numerous researchers and industry for the construction and management of the new generation buildings. In this regard, this paper proposes various demand side management (DSM programs using the genetic algorithm (GA, teaching learning-based optimization (TLBO, the enhanced differential evolution (EDE algorithm and the proposed enhanced differential teaching learning algorithm (EDTLA to manage energy and comfort, while taking the human preferences into consideration. Power consumption patterns of shiftable home appliances are modified in response to the real-time price signal in order to get monetary benefits. To further improve the cost and user discomfort objectives along with reduced carbon emission, renewable energy sources (RESs are also integrated into the microgrid (MG. The proposed model is implemented in a smart residential complex of multiple homes under a real-time pricing environment. We figure out two feasible regions: one for electricity cost and the other for user discomfort. The proposed model aims to deal with the stochastic nature of RESs while introducing the battery storage system (BSS. The main objectives of this paper include: (1 integration of RESs; (2 minimization of the electricity bill (cost and discomfort; and (3 minimizing the peak to average ratio (PAR and carbon emission. Additionally, we also analyze the tradeoff between two conflicting objectives

  8. Smart grid dispatch strategy for on/off demand-side devices

    DEFF Research Database (Denmark)

    Biegel, Benjamin; Andersen, Palle; Pedersen, Tom S.

    2013-01-01

    We consider an aggregator managing a portfolio of runtime and downtime constrained ON/OFF demand-side devices. The devices are able to shift consumption in time within certain energy limitations. We show how the aggregator can manage the portfolio of devices to collectively provide upward...

  9. Impact of realistic communications for fast-acting demand side management

    DEFF Research Database (Denmark)

    Dambrauskas, Paulius; Syed, Mazheruddin H.; Blair, Steven M.

    2017-01-01

    The rising penetration of intermittent energy resources is increasing the need for more diverse electrical energy resources that are able to support ancillary services. Demand side management (DSM) has a significant potential to fulfil this role, but several challenges are still impeding the wide...

  10. Ensuring the security of electricity supply in Ontario: is demand-side management the answer?

    International Nuclear Information System (INIS)

    Chuddy, B.

    2004-01-01

    This paper examines the issues relating to ensuring the security of electricity supply in Ontario. In particular, it focuses on demand-side management as a means of achieving these objectives. The solution involves both conservation and supply. It is therefore critical that there be investment in new supply with multiple buyers/sellers. regulatory environment and pricing could encourage conservation

  11. Generation of flexible domestic load profiles to evaluate demand side management approaches

    NARCIS (Netherlands)

    Hoogsteen, Gerwin; Molderink, Albert; Hurink, Johann L.; Smit, Gerardus Johannes Maria

    2016-01-01

    Various Demand Side Management (DSM) approaches have been developed the last couple of years to avoid costly grid upgrades. However, evaluation of these DSM methodologies is usually restricted to a use-case specific example, making comparison between different DSM approaches hard. This paper

  12. Experimental determination of demand side management potential of wet appliances in the Netherlands

    NARCIS (Netherlands)

    Staats, M. R.; de Boer-Meulman, P. D M; van Sark, W. G J H M

    2017-01-01

    The potential of demand side management (DSM) of wet appliances (washing machine, dishwasher and tumble dryer) in households with photovoltaic (PV) systems is studied experimentally focusing on evening peak demand reduction and increase in PV self-consumption. In a sample of 100 Dutch households the

  13. Controlling market power and price spikes in electricity networks: Demand-side bidding.

    Science.gov (United States)

    Rassenti, Stephen J; Smith, Vernon L; Wilson, Bart J

    2003-03-04

    In this article we report an experiment that examines how demand-side bidding can discipline generators in a market for electric power. First we develop a treatment without demand-side bidding; two large firms are allocated baseload and intermediate cost generators such that either firm might unilaterally withhold the capacity of its intermediate cost generators from the market to benefit from the supracompetitive prices that would result from only selling its baseload units. In a converse treatment, ownership of some of the intermediate cost generators is transferred from each of these firms to two other firms such that no one firm could unilaterally restrict output to spawn supracompetitive prices. Having established a well controlled data set with price spikes paralleling those observed in the naturally occurring economy, we also extend the design to include demand-side bidding. We find that demand-side bidding completely neutralizes the exercise of market power and eliminates price spikes even in the presence of structural market power.

  14. Supply- and demand-side effects of power sector planning with demand-side management options and SO2 emission constraints

    International Nuclear Information System (INIS)

    Shrestha, R.M.; Marpaung, C.O.P.

    2005-01-01

    This paper examines the implications of SO 2 emission mitigation constraints in the power sector planning in Indonesia--a developing country--during 2003-2017 from a long term integrated resource planning perspective. A decomposition model is developed to assess the contributions of supply- and demand-side effects to the total changes in CO 2 , SO 2 and NO x emissions from the power sector due to constraints on SO 2 emissions. The results of the study show that both the supply- and demand-side effects would act towards the reduction of CO 2 , SO 2 and NO x emissions. However, the supply-side effect would play the dominant role in emission mitigations from the power sector in Indonesia. The average incremental SO 2 abatement cost would increase from US$ 970 to US$ 1271 per ton of SO 2 , while electricity price would increase by 2-18% if the annual SO 2 emission reduction target is increased from 10% to 25%

  15. From demand side management (DSM) to energy efficiency services: A Finnish case study

    International Nuclear Information System (INIS)

    Apajalahti, Eeva-Lotta; Lovio, Raimo; Heiskanen, Eva

    2015-01-01

    Energy conservation is expected to contribute significantly to climate change mitigation and energy security. Traditionally, energy companies have had strong role in providing Demand Side Management (DSM) measures. However, after energy market liberalization in Europe, energy companies' DSM activities declined. In response, the EU issued Directive (2006/32/EC) on energy end-use efficiency and energy services (ESD) to motivate energy companies to promote energy efficiency and conservation, closely followed by Directive (2012/27/EU) on energy efficiency (EED), requiring the setting up energy efficiency obligation schemes. Despite strong political and economic motivation, energy companies struggle to develop energy efficiency services in liberalised energy markets due to conflicting institutional demands, which arise from contradicting policy requirements and customer relations. The main challenges in developing new innovative energy efficiency services, evidenced by an in-depth case study, were (1) the unbundling of energy company operations, which makes it difficult to develop services when the contribution of several business units is required and (2) the distrust among energy end-users, which renders the business logic of energy saving contract models self-contradictory. On the basis of the research, avenues out of these dilemmas are suggested. -- Highlights: •Energy companies struggle to become energy service provides •We explore the development of new energy saving business solutions •Dispersed organisational structure leaves energy saving business as isolated function •Strong consumer scepticism towards energy companies as providers of energy saving •More emphasis on the changing company-customer relationship is needed

  16. An analysis of the factors influencing demand-side management activity in the electric utility industry

    Science.gov (United States)

    Bock, Mark Joseph

    Demand-side management (DSM), defined as the "planning, implementation, and monitoring of utility activities designed to encourage consumers to modify their pattern of electricity usage, including the timing and level of electricity demand," is a relatively new concept in the U.S. electric power industry. Nevertheless, in twenty years since it was first introduced, utility expenditures on DSM programs, as well as the number of such programs, have grown rapidly. At first glance, it may seem peculiar that a firm would actively attempt to reduce demand for its primary product. There are two primary explanations as to why a utility might pursue DSM: regulatory mandate, and self-interest. The purpose of this dissertation is to determine the impact these influences have on the amount of DSM undertaken by utilities. This research is important for two reasons. First, it provides insight into whether DSM will continue to exist as competition becomes more prevalent in the industry. Secondly, it is important because no one has taken a comprehensive look at firm-level DSM activity on an industry-wide basis. The primary data set used in this dissertation is the U.S. Department of Energy's Annual Electric Utility Report, Form EIA-861, which represents the most comprehensive data set available for analyzing DSM activity in the U.S. There are four measures of DSM activity in this data set: (1) utility expenditures on DSM programs; (2) energy savings by DSM program participants; and (3) the actual and (4) the potential reductions in peak load resulting from utility DSM measures. Each is used as the dependent variable in an econometric analysis where independent variables include various utility characteristics, regulatory characteristics, and service territory and customer characteristics. In general, the results from the econometric analysis suggest that in 1993, DSM activity was primarily the result of regulatory pressure. All of the evidence suggests that if DSM continues to

  17. Demand side management scheme in smart grid with cloud computing approach using stochastic dynamic programming

    Directory of Open Access Journals (Sweden)

    S. Sofana Reka

    2016-09-01

    Full Text Available This paper proposes a cloud computing framework in smart grid environment by creating small integrated energy hub supporting real time computing for handling huge storage of data. A stochastic programming approach model is developed with cloud computing scheme for effective demand side management (DSM in smart grid. Simulation results are obtained using GUI interface and Gurobi optimizer in Matlab in order to reduce the electricity demand by creating energy networks in a smart hub approach.

  18. Demand-side management project for Tenaga Nasional Berhad. Progress report No. 4. Export trade information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    This study, conducted by the California Energy Commission, was funded by the U.S. Trade and Development Agency. Progress Report No. 4 is divided into the following contents: April 6, 1994 Training Mission Delegation Itinerary; April 6, 1994 Training Mission Workshop Information Package; Letter to Chairman of Tenaga Nasional Berhad Requesting Demonstration Project Funding; Design/Build Construction Bid Proposal for Energy Efficient Electric Technology Demontration Project; Final Draft of Demand-Side Management Plan for Tenaga Nasional Berhad; Attachments.

  19. Electronic Health Records Prospects in Egypt: A Demand-Side Perspective

    OpenAIRE

    Badran; Mona Farid

    2017-01-01

    The present study sheds light on the expected factors that would impact the Electronic Health Records (EHR) service in Egypt from the demand-side perspective, i.e. the health care consumer. This empirical study is motivated by the widespread use of EHR as a method of promoting health services globally, where it is considered as an efficiency enhancing, cost effective technology. Moreover, the healthcare sector in Egypt is gaining momentum, especially that the comprehensive healthcare and soci...

  20. Grey-box Modelling of a Household Refrigeration Unit Using Time Series Data in Application to Demand Side Management

    DEFF Research Database (Denmark)

    Sossan, Fabrizio; Lakshmanan, Venkatachalam; Costanzo, Giuseppe Tommaso

    2016-01-01

    This paper describes the application of stochastic grey-box modeling to identify electrical power consumption-to-temperature models of a domestic freezer using experimental measurements. The models are formulated using stochastic differential equations (SDEs), estimated by maximum likelihood......) to shift the electricity consumption of a freezer in demand response experiments, thereby addressing the model selection problem also from the application point of view and showing in an experimental context the ability of MPC to exploit the freezer as a demand side resource (DSR)....... estimation (MLE), validated through the model residuals analysis and cross-validated to detect model over-fitting. A nonlinear model based on the reversed Carnot cycle is also presented and included in the modeling performance analysis. As an application of the models, we apply model predictive control (MPC...

  1. Definitional-mission report: Demand-side management program for the Tenaga Nasional Berhad in Malaysia. Export trade information

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    A definitional mission evaluated the prospects of the US Trade and Development Program (TDP) funding a market demonstration of a Demand Side Management (DSM) program being developed by the Tenaga Nasional Berhad (TNB) in Malaysia. TNB is the national electric utility of Malaysia with the responsibility to promote economically efficient supply of electricity needed for the economic development of Peninsular Malaysia. DSM is a utility-financed program to affect energy savings at the enduse level thereby reducing peak and base loads. Historically, TNB has taken the peak load and the load duration curves as given in planning and implementing the least-cost generation expansion strategy. It has refrained from influencing the pattern of energy use by the customer through any means other than tariff structures and levels. The experience of many utilities with DSM in the U.S. offers TNB an opportunity to develop a suitable DSM program for Malaysia.

  2. Energy efficiency and demand side management. Complement or contradiction? The impact of energy efficiency measures on the potential for demand side management; Energieeffizienz und Lastflexibilisierung. Partner oder Gegenspieler? Der Einfluss von Energieeffizienzmassnahmen auf das Lastflexibilisierungspotenzial

    Energy Technology Data Exchange (ETDEWEB)

    Peraus, Sebastian [TU Muenchen (Germany). Maschinenwesen; Gruber, Anna; Roon, Serafin von [Forschungsgesellschaft fuer Energiewirtschaft mbH, Muenchen (Germany)

    2013-02-01

    The success of the so called ''Energiewende'' in Germany is based on two major elements: the improvements in energy efficiency and the increase of renewable energy sources (RES). But the supply of RES cannot always be regulated according to the electricity demand. As a result both flexible electricity generation and demand side management will become increasingly important. Consequently, it has to be discussed, whether the improvement of energy efficiency and demand side management could interfere. This publication will illustrate the possible impact of energy efficiency measures on the potential for demand side management.

  3. Demand side management in a day-ahead wholesale market: A comparison of industrial & social welfare approaches

    International Nuclear Information System (INIS)

    Jiang, Bo; Farid, Amro M.; Youcef-Toumi, Kamal

    2015-01-01

    Highlights: • We compare two demand side management in a day-ahead electricity wholesale market. • We develop and reconcile social welfare & industrial DSM mathematical models. • We show the industrial netload has an additional forecast quantity of baseline. • We analytically and numerically show the model equivalence with accurate baseline. • We numerically demonstrate the baseline errors lead to higher and costlier dispatch. - Abstract: The intermittent nature of renewable energy has been discussed in the context of the operational challenges that it brings to electrical grid reliability. Demand side management (DSM) with its ability to allow customers to adjust electricity consumption in response to market signals has often been recognized as an efficient way to mitigate the variable effects of renewable energy as well as to increase system efficiency and reduce system costs. However, the academic & industrial literature have taken divergent approaches to DSM implementation. While the popular approach among academia adopts a social welfare maximization formulation, the industrial practice compensates customers according to their load reduction from a predefined electricity consumption baseline that would have occurred without DSM. This paper rigorously compares these two different approaches in a day-ahead wholesale market context analytically and in a test case using the same system configuration and mathematical formalism. The comparison of the two models showed that a proper reconciliation of the two models might make them mitigate the stochastic netload in fundamentally the same way, but only under very specific conditions which are rarely met in practice. While the social welfare model uses a stochastic net load composed of two terms, the industrial DSM model uses a stochastic net load composed of three terms including the additional baseline term. DSM participants are likely to manipulate the baseline in order to receive greater financial

  4. A distributed algorithm for demand-side management: Selling back to the grid.

    Science.gov (United States)

    Latifi, Milad; Khalili, Azam; Rastegarnia, Amir; Zandi, Sajad; Bazzi, Wael M

    2017-11-01

    Demand side energy consumption scheduling is a well-known issue in the smart grid research area. However, there is lack of a comprehensive method to manage the demand side and consumer behavior in order to obtain an optimum solution. The method needs to address several aspects, including the scale-free requirement and distributed nature of the problem, consideration of renewable resources, allowing consumers to sell electricity back to the main grid, and adaptivity to a local change in the solution point. In addition, the model should allow compensation to consumers and ensurance of certain satisfaction levels. To tackle these issues, this paper proposes a novel autonomous demand side management technique which minimizes consumer utility costs and maximizes consumer comfort levels in a fully distributed manner. The technique uses a new logarithmic cost function and allows consumers to sell excess electricity (e.g. from renewable resources) back to the grid in order to reduce their electric utility bill. To develop the proposed scheme, we first formulate the problem as a constrained convex minimization problem. Then, it is converted to an unconstrained version using the segmentation-based penalty method. At each consumer location, we deploy an adaptive diffusion approach to obtain the solution in a distributed fashion. The use of adaptive diffusion makes it possible for consumers to find the optimum energy consumption schedule with a small number of information exchanges. Moreover, the proposed method is able to track drifts resulting from changes in the price parameters and consumer preferences. Simulations and numerical results show that our framework can reduce the total load demand peaks, lower the consumer utility bill, and improve the consumer comfort level.

  5. A distributed algorithm for demand-side management: Selling back to the grid

    Directory of Open Access Journals (Sweden)

    Milad Latifi

    2017-11-01

    Full Text Available Demand side energy consumption scheduling is a well-known issue in the smart grid research area. However, there is lack of a comprehensive method to manage the demand side and consumer behavior in order to obtain an optimum solution. The method needs to address several aspects, including the scale-free requirement and distributed nature of the problem, consideration of renewable resources, allowing consumers to sell electricity back to the main grid, and adaptivity to a local change in the solution point. In addition, the model should allow compensation to consumers and ensurance of certain satisfaction levels. To tackle these issues, this paper proposes a novel autonomous demand side management technique which minimizes consumer utility costs and maximizes consumer comfort levels in a fully distributed manner. The technique uses a new logarithmic cost function and allows consumers to sell excess electricity (e.g. from renewable resources back to the grid in order to reduce their electric utility bill. To develop the proposed scheme, we first formulate the problem as a constrained convex minimization problem. Then, it is converted to an unconstrained version using the segmentation-based penalty method. At each consumer location, we deploy an adaptive diffusion approach to obtain the solution in a distributed fashion. The use of adaptive diffusion makes it possible for consumers to find the optimum energy consumption schedule with a small number of information exchanges. Moreover, the proposed method is able to track drifts resulting from changes in the price parameters and consumer preferences. Simulations and numerical results show that our framework can reduce the total load demand peaks, lower the consumer utility bill, and improve the consumer comfort level. Keywords: Energy, Systems engineering, Electrical engineering

  6. R and D options for demand side management in Japanese electric utilities

    International Nuclear Information System (INIS)

    Yamamoto, T.

    1995-01-01

    Japanese electric utilities are facing several problems: increasing construction cost of power facilities, siting constraints and the environmental issue of greenhouse gas emissions. To overcome these problems, electric utilities have been promoting demand-side-management (DSM) activities as well as supplier-side measures, with some presently being carried out through promoting energy conservation technologies and introducing tariff options for residential/commercial and industrial consumers. R and D works have been carried out on various fields such as energy storage and heat storage which contribute to the improvement of the load factor. 5 figs., 2 tabs

  7. Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

    Energy Technology Data Exchange (ETDEWEB)

    Uuspaeae, P. [VTT Energy, Espoo (Finland)

    1996-12-31

    The scope of this research is data communications for electric utilities. Demand Side Management (DSM) calls for communication between the Electric Utility and the Customer. The communication capacity needed will depend on the functions that are chosen for DSM, and on the number of customers. Some functions may be handled with one-way communications, some functions require two-way communication. Utility Communication Architecture looks for an overall view of the communications needs and communication systems in an electric utility. The objective is to define and specify suitable and compatible communications procedures within the Utility and also to outside parties. (27 refs.)

  8. Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

    Energy Technology Data Exchange (ETDEWEB)

    Uuspaeae, P [VTT Energy, Espoo (Finland)

    1997-12-31

    The scope of this research is data communications for electric utilities. Demand Side Management (DSM) calls for communication between the Electric Utility and the Customer. The communication capacity needed will depend on the functions that are chosen for DSM, and on the number of customers. Some functions may be handled with one-way communications, some functions require two-way communication. Utility Communication Architecture looks for an overall view of the communications needs and communication systems in an electric utility. The objective is to define and specify suitable and compatible communications procedures within the Utility and also to outside parties. (27 refs.)

  9. THE TECHNOLOGY ASSESSMENT OF DEMAND SIDE BIDDING IN THE SOUTH AFRICAN CONTEXT*

    Directory of Open Access Journals (Sweden)

    H.K. Grover

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT:South Africa is currently in the grip of a severe power supply capacity constraint. January 2007 saw blackouts throughout the country, and worse was expected in the months to come. As a measure of immediate remedy Eskom has turned to demand side bidding (DSB, a methodology whereby the demand side has an opportunity to sell back flexible load to the supply side. This paper assesses DSB with the aim of evaluating and gauging the current and potential future standing of DSB as a technology product within the South African context.

    AFRIKAANSE OPSOMMING: Suid-Afrika ervaar tans ’n ernstige vraagstuk in elektrisiteitsvoorsiening. Vanaf Januarie 2007 kom gereelde kragonderbrekings voor, en volgens alle aanduidings lê die ergste nog voor. As ’n korttermynmaatreël beoog ESKOM ’n strategie van aanvraagbestuur en spesifiek aanvraag-bie, ’n metodologie waarvolgens verbruikers die geleentheid kry om elektrisiteit aan die verskaffer terug te verkoop. Hierdie artikel assesseer die metodologie ten einde die huidige en toekomstige gebruikersmoontlikhede daarvan as ’n tegnologieproduk binne Suid-Afrikaanse konteks te bepaal.

  10. Market modeling for assessment of demand side programs using the marginal cost

    International Nuclear Information System (INIS)

    Papastamatiou, Panagiotis; Psarras, John

    2000-01-01

    Demand side management is nowadays considered as a functional step in the energy planning process. The criteria proposed for the assessment of the demand side programs (DSPs) are usually based on the balance between the marginal supply cost and the mean DSP cost. These criteria could not support the allotting of the invested capital to incentives for the consumers and advertising. This paper presents a methodology to support the utility planning at this point with more reliability. It proposes the expansion of the assessment criteria with the use of the marginal cost of the DSP. For the calculation of the DSP marginal cost, a dynamic model is developed and it is used for the simulation of the penetration of a DS Program. Using the 'least-cost' criterion as the decision rule for the simulation, the planner has a distribution of the available investment capital throughout the whole planning period. The use of the 'most-value' criterion supports the separation of the invested capital between incentives for the consumers and supportive expenses, e.g. advertising, marketing cost, etc. (Author)

  11. Development of assessment model for demand-side management investment programs in Korea

    International Nuclear Information System (INIS)

    Lee, Deok Ki; Park, Sang Yong; Park, Soo Uk

    2007-01-01

    The goal of this study is the development of the assessment model for demand-side management investment programs (DSMIPs) in the areas of natural gas and district heating. Demand-side management (DSM) is the process of managing the consumption of energy to optimize available and planned generation resources and DSMIPs are the actions conducted by energy suppliers to promote investment in the DSM. In this research, the analytic hierarchy process (AHP) method was used to develop a scientific and rational assessment model for DSMIPs. To apply the AHP method, assessment indicators for the assessment have been identified by using the concept of 'plan, do, see' and the decision-making hierarchy was established. Then AHP model was developed to set up the priorities of assessment indicators and a survey of experts from government and energy suppliers was carried out. Finally, the priorities of assessment indicators were calculated based on the result of survey using the AHP method. The assessment model developed from this research will actually be used to assess the results of DSMIPs, which is being carried out by Korea gas corporation (KOGAS) and Korea district heating corporation (KDHC). The use of the assessment model developed by this research is expected to contribute to enhance efficiency in planning, execution, and assessment of DSMIPs

  12. Renewable generation versus demand-side management. A comparison for the Spanish market

    International Nuclear Information System (INIS)

    Roldán Fernández, Juan Manuel; Burgos Payán, Manuel; Riquelme Santos, Jesús Manuel; Trigo García, Ángel Luis

    2016-01-01

    Conventionally the required instantaneous balance generation-load is achieved by adjusting production to fit variable consumer demand. Nowadays, a significant and increasing segment of generation is renewable. But renewable production cannot be scheduled on request since its generation is dependent on nature (wind, sun, …). In this context, demand-side management (DSM) would help since it would be advisable for part of the flexibility to be provided by the demand. The integration of renewable production and demand-side management (DSM), are compared in this work for Spain throughout 2008–2014. First a qualitative model, based on the linearization of the wholesale market, is employed to explore some hypotheses. A set of scenarios are then examined to quantify the main effects on the market. The results show that DSM exhibits the best performance in terms of economic efficiency and environmental sustainability, as well as for the reduction of load peaks and losses in the system, what suggests the convenience of promoting plans for the replacement of equipment with other more efficient as well as the implementation of real-time tariffs. - Highlights: •The impact of the integration of renewable production versus DSM has been compared. •Merit-order effect related to energy efficiency and to load-shifting is identified. •Large industries achieve energy efficiency with less CAPEX than renewable generation. •Load-shifting cycle yields a reduction of the traded energy and the economic volume.

  13. A Simulation of Rainwater Harvesting Design and Demand-Side Controls for Large Hospitals

    Directory of Open Access Journals (Sweden)

    Lawrence V. Fulton

    2018-05-01

    Full Text Available Inpatient health buildings in the United States are the most intensive users of water among large commercial buildings. Large facilities (greater than 1 million square feet consume an average of 90 million gallons per building per year. The distribution and treatment of water imposes a significant electrical power demand, which may be the single largest energy requirement for various states. Supply and demand-side solutions are needed, particularly in arid and semi-arid regions where water is scarce. This study uses continuous simulations based on 71 years of historical data to estimate how rainwater harvesting systems and demand-side interventions (e.g., low-flow devices, xeriscaping would offset the demand for externally-provided water sources in a semi-arid region. Simulations from time series models are used to generate alternative rainfall models to account for potential non-stationarity and volatility. Results demonstrate that hospital external water consumption might be reduced by approximately 25% using conservative assumptions and depending on the design of experiment parameters associated with rainfall capture area, building size, holding tank specifications, and conservation efforts.

  14. An Integrated Decentralized Energy Planning Model considering Demand-Side Management and Environmental Measures

    Directory of Open Access Journals (Sweden)

    Seyed Mahmood Kazemi

    2013-01-01

    Full Text Available Decentralized energy planning (DEP is looked upon as an indisputable opportunity for energy planning of villages, isolated islands, and far spots. Nonetheless, at this decentralized planning level, the value of demand-side resources is not fairly examined, despite enjoying great advantages. Therefore, the core task of this study is to integrate demand-side resources, as a competing solution against supply-side alternatives, with decentralized energy planning decisions and demonstrate the rewarding role it plays. Moreover, sustainability indicators (SIs are incorporated into DEP attempts in order to attain sustainable development. It is emphasized that unless these indicators are considered at lower energy planning levels, they will be ignored at higher planning levels as well. Hence, to the best knowledge of the authors, this study for the first time takes into account greenhouse gas (GHG emissions produced by utilization of renewable energies in DEP optimization models. To address the issues mentioned previously, multiobjective linear programming model along with a min-max goal programming approach is employed. Finally, using data taken from the literature, the model is solved, and the obtained results are discussed. The results show that DSM policies have remarkably contributed to significant improvements especially in terms of environmental indicators.

  15. Demand Side Management for the European Supergrid: Occupancy variances of European single-person households

    International Nuclear Information System (INIS)

    Torriti, Jacopo

    2012-01-01

    The prospect of a European Supergrid calls for research on aggregate electricity peak demand and Europe-wide Demand Side Management. No attempt has been made as yet to represent a time-related demand curve of residential electricity consumption at the European level. This article assesses how active occupancy levels of single-person households vary in single-person household in 15 European countries. It makes use of occupancy time-series data from the Harmonised European Time Use Survey database to build European occupancy curves; identify peak occupancy periods; construct time-related electricity demand curves for TV and video watching activities and assess occupancy variances of single-person households. - Highlights: ► Morning peak occupancies of European single households tale place between 7h30 and 7h40. ► Evening peaks take place between 20h10 and 20h20. ► TV and video activities during evening peaks make up about 3.1 GWh of European peak electricity load. ► Baseline and peak occupancy variances vary across countries. ► Baseline and peak occupancy variances can be used as input for Demand Side Management choices.

  16. Multi-objective demand side scheduling considering the operational safety of appliances

    International Nuclear Information System (INIS)

    Du, Y.F.; Jiang, L.; Li, Y.Z.; Counsell, J.; Smith, J.S.

    2016-01-01

    Highlights: • Operational safety of appliances is introduced in multi-objective scheduling. • Relationships between operational safety and other objectives are investigated. • Adopted Pareto approach is compared with Weigh and Constraint approaches. • Decision making of Pareto approach is proposed for final appliances’ scheduling. - Abstract: The safe operation of appliances is of great concern to users. The safety risk increases when the appliances are in operation during periods when users are not at home or when they are asleep. In this paper, multi-objective demand side scheduling is investigated with consideration to the appliances’ operational safety together with the electricity cost and the operational delay. The formulation of appliances’ operational safety is proposed based on users’ at-home status and awake status. Then the relationships between the operational safety and the other two objectives are investigated through the approach of finding the Pareto-optimal front. Moreover, this approach is compared with the Weigh and Constraint approaches. As the Pareto-optimal front consists of a set of optimal solutions, this paper proposes a method to make the final scheduling decision based on the relationships among the multiple objectives. Simulation results demonstrate that the operational safety is improved with the sacrifice of the electricity cost and the operational delay, and that the approach of finding the Pareto-optimal front is effective in presenting comprehensive optimal solutions of the multi-objective demand side scheduling.

  17. Modulation strategies of integrated HVAC systems used in residential buildings for demand-side management at different scales

    OpenAIRE

    Georges, Emeline

    2017-01-01

    The integration of renewable energy sources in the electricity production mix has an important impact on the management of the electricity grid, due to their intermittency. In particular, to ensure grid balancing, there is a rising need for flexibility, both on the supply and demand sides. A possible solution to help achieve grid balancing is the smart modulation of the electrical load in a "demand following supply" scheme through demand-side management. In this context, the objective of...

  18. Bulk electric system reliability evaluation incorporating wind power and demand side management

    Science.gov (United States)

    Huang, Dange

    correlations and the interactive effects of wind power and load forecast uncertainty on system reliability are examined. The concept of the security cost associated with operating in the marginal state in the well-being framework is incorporated in the economic analyses associated with system expansion planning including wind power and load forecast uncertainty. Overall reliability cost/worth analyses including security cost concepts are applied to select an optimal wind power injection strategy in a bulk electric system. The effects of the various demand side management measures on system reliability are illustrated using the system, load point, and well-being indices, and the reliability index probability distributions. The reliability effects of demand side management procedures in a bulk electric system including wind power and load forecast uncertainty considerations are also investigated. The system reliability effects due to specific demand side management programs are quantified and examined in terms of their reliability benefits.

  19. Optimal Multi-scale Demand-side Management for Continuous Power-Intensive Processes

    Science.gov (United States)

    Mitra, Sumit

    With the advent of deregulation in electricity markets and an increasing share of intermittent power generation sources, the profitability of industrial consumers that operate power-intensive processes has become directly linked to the variability in energy prices. Thus, for industrial consumers that are able to adjust to the fluctuations, time-sensitive electricity prices (as part of so-called Demand-Side Management (DSM) in the smart grid) offer potential economical incentives. In this thesis, we introduce optimization models and decomposition strategies for the multi-scale Demand-Side Management of continuous power-intensive processes. On an operational level, we derive a mode formulation for scheduling under time-sensitive electricity prices. The formulation is applied to air separation plants and cement plants to minimize the operating cost. We also describe how a mode formulation can be used for industrial combined heat and power plants that are co-located at integrated chemical sites to increase operating profit by adjusting their steam and electricity production according to their inherent flexibility. Furthermore, a robust optimization formulation is developed to address the uncertainty in electricity prices by accounting for correlations and multiple ranges in the realization of the random variables. On a strategic level, we introduce a multi-scale model that provides an understanding of the value of flexibility of the current plant configuration and the value of additional flexibility in terms of retrofits for Demand-Side Management under product demand uncertainty. The integration of multiple time scales leads to large-scale two-stage stochastic programming problems, for which we need to apply decomposition strategies in order to obtain a good solution within a reasonable amount of time. Hence, we describe two decomposition schemes that can be applied to solve two-stage stochastic programming problems: First, a hybrid bi-level decomposition scheme with

  20. Impact of realistic communications for fast-acting demand side management

    DEFF Research Database (Denmark)

    Dambrauskas, Paulius; Syed, Mazheruddin H.; Blair, Steven M.

    2017-01-01

    The rising penetration of intermittent energy resources is increasing the need for more diverse electrical energy resources that are able to support ancillary services. Demand side management (DSM) has a significant potential to fulfil this role, but several challenges are still impeding the wide......-scale integration of DSM. One of the major challenges is ensuring the performance of the networks that enable communications between control centres and the end DSM resources. This study presents an analysis of all communications networks that typically participate in the activation of DSM, and provides an estimate...... for the overall latency that these networks incur. The most significant sources of delay from each of the components of the communications network are identified which allows the most critical aspects to be determined. This analysis, therefore, offers a detailed evaluation of the performance of DSM resources...

  1. Increased demand-side flexibility: market effects and impacts on variable renewable energy integration

    Directory of Open Access Journals (Sweden)

    Åsa Grytli Tveten

    2016-12-01

    Full Text Available This paper investigates the effect of increased demand-side flexibility (DSF on integration and market value of variable renewable energy sources (VRE. Using assumed potentials, system-optimal within-day shifts in demand are investigated for the Northern European power markets in 2030, applying a comprehensive partial equilibrium model with high temporal and spatial resolution. Increased DSF is found to cause only a minor (less than 3% reduction in consumers’ cost of electricity. VRE revenues are found to increase (up to 5% and 2% for wind and solar power, respectively, and total VRE curtailment decreases by up to 7.2 TWh. Increased DSF causes only limited reductions in GHG emissions. The emission reduction is, however, sensitive to underlying assumptions. We conclude that increased DSF is a promising measure for improving VRE integration. However, low consumers’ savings imply that policies stimulating DFS will be needed to fully use the potential benefits of DSF for VRE integration

  2. Demand side management for remote area power supply systems incorporating solar irradiance model

    International Nuclear Information System (INIS)

    Al-Alawi, A.; Islam, S.M.

    2004-01-01

    This paper presents a technique for generating the daily electricity load profile for remote areas in the Middle East from first principles, using diversified demand. The generated load profile includes the energy required to run a small desalination unit to provide the necessary freshwater. Demand side management (DSM) is used in this study to smooth out the daily peaks and fill valleys in the load curve to make the most efficient use of energy resources. Finally, the load profile is compared with real data for six houses collected from Safri area in the Sultanate of Oman. These data may be used as the basis to obtain load profiles of other remote areas of the Middle East since the weather and social factors are similar. The modified hourly variation factor based on weather and economic and social factors of the Middle East is obtained. (author)

  3. Why strategic pricing is the most powerful DSM [demand-side management] tool

    International Nuclear Information System (INIS)

    LeBlanc, W.

    1990-01-01

    Strategic pricing has long been under-utilized as a strategic tool by the electric utility industry. Ways by which utility, customer and regulatory interests can and should overlap with reference to strategic planning, and how the electric industry could enhance its ability to continue providing premier energy services to its customers and society are examined. Strategic pricing in the airline, banking, automobile and telephone industries are examined and compared. Strategic pricing can help utilities segment markets to improve service value, define products, create customer incentives to purchase/consume desirable goods and services, and signal competitors. Each of these benefits is illustrated with an example that closely integrates strategic pricing with demand-side management. Pricing strategically takes many steps, but can be broken down into: meet common challenges of business and marketing objectives; gain regulatory acceptance; and energize the organization to accept, adopt and implement strategic pricing

  4. Optimal energy efficiency policies and regulatory demand-side management tests: How well do they match?

    International Nuclear Information System (INIS)

    Brennan, Timothy J.

    2010-01-01

    Under conventional models, subsidizing energy efficiency requires electricity to be priced below marginal cost. Its benefits increase when electricity prices increase to finance the subsidy. With high prices, subsidies are counterproductive unless consumers fail to make efficiency investments when private benefits exceed costs. If the gain from adopting efficiency is only reduced electricity spending, capping revenues from energy sales may induce a utility to substitute efficiency for generation when the former is less costly. This goes beyond standard 'decoupling' of distribution revenues from sales, requiring complex energy price regulation. The models' results are used to evaluate tests in the 2002 California Standard Practice Manual for assessing demand-side management programs. Its 'Ratepayer Impact Measure' test best conforms to the condition that electricity price is too low. Its 'Total Resource Cost' and 'Societal Cost' tests resemble the condition for expanded decoupling. No test incorporates optimality conditions apart from consumer choice failure.

  5. Integrated design and evaluation of biomass energy system taking into consideration demand side characteristics

    International Nuclear Information System (INIS)

    Ren, Hongbo; Zhou, Weisheng; Nakagami, Ken'ichi; Gao, Weijun

    2010-01-01

    In this paper, a linear programming model has been developed for the design and evaluation of biomass energy system, while taking into consideration demand side characteristics. The objective function to be minimized is the total annual cost of the energy system for a given customer equipped with a biomass combined cooling, heating and power (CCHP) plant, as well as a backup boiler fueled by city gas. The results obtained from the implementation of the model demonstrate the optimal system capacities that customers could employ given their electrical and thermal demands. As an illustrative example, an investigation addresses the optimal biomass CCHP system for a residential area located in Kitakyushu Science and Research Park, Japan. In addition, sensitivity analyses have been elaborated in order to show how the optimal solutions would vary due to changes of some key parameters including electricity and city gas tariffs, biogas price, electricity buy-back price, as well as carbon tax rate. (author)

  6. R and D options for demand side management in Japanese electric utilities

    International Nuclear Information System (INIS)

    Yamamoto, Takahiko

    1996-01-01

    Japanese electric demand has been steadily increasing in accordance with the economic growth. However, Japanese electric utilities are facing several problems; increasing construction cost of power facilities, siting constraints and the environmental issue of greenhouse gas emissions. To overcome these problems, electric utilities have been promoting demand-side-management (DSM) activities as well as supplier-side measures, with some presently being carried out through promoting energy conservation technologies and introducing electric tariff options of specific contracts for residential/commercial and industrial consumers. Japanese electric utilities have been carrying out R and D for the future, in particular, energy storage and heat storage which contribute to the improvement of load factor. In this paper, I would like to outline the R and D options for DSM in Japan. (author)

  7. Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

    Energy Technology Data Exchange (ETDEWEB)

    Kaerkkaeinen, S.; Kekkonen, V. [VTT Energy, Espoo (Finland); Rissanen, P. [Tietosavo Oy (Finland)

    1996-12-31

    In this project the main target is to develop and assess methods for DSM (Demand Side Management) and distribution automation planning from the utility`s point of view. The final goal is to integrate these methods for the strategic planning of electric utilities. In practice the project is divided into four main parts: The development and assessment of DSM/IRP planning methods and cost/benefit analysis as a part of international co-operation (IEA DSM Agreement: Annex IV, European Cost/Benefit analysis of DSM, EUBC, and Finnish SAVE-project started in 1995 in co-operation with SRC International and six electric utilities in Finland); Development of PC-based DSM planning and assessment tools at VTT; Development of a decision support system of distribution network planning including DSM options at Tietosavo Oy and Integration of DSM planning and network planning tools in co-operation with VTT Energy and Tietosavo Oy

  8. Developing a demand side management strategic framework through a collaborative [process

    International Nuclear Information System (INIS)

    Kostler, J.

    1992-01-01

    Alberta Power Ltd. is developing a demand side management (DSM) strategic framework through a collaborative process that began in September 1991. The process is seen to have the advantages of involving customers in DSM issues, giving them the opportunity to determine the outcome, being less confrontational, and having the capability of arriving at solutions unattainable through other processes. Issues being considered in the collaborative process include cost effectiveness, externalities, screening and analyzing of DSM measures, cost allocation and recovery, DSM lost revenues, the utility role in DSM, measurement criteria, and incentives. The process includes day-long meetings of a 12-member collaborative group comprising representatives from Alberta Power, government agencies, industry and municipal associations, and environmental and consumer organizations. A professional facilitator and an expert consultant from outside Alberta Power were employed to support the collaborative process. The process is working well and is on track to present the utility with a strategic framework to deal with DSM

  9. An Overview of Demand Side Management Control Schemes for Buildings in Smart Grids

    DEFF Research Database (Denmark)

    Kosek, Anna Magdalena; Costanzo, Giuseppe Tommaso; Bindner, Henrik W.

    2013-01-01

    The increasing share of distributed energy resources and renewable energy in power systems results in a highly variable and less controllable energy production. Therefore, in order to ensure stability and to reduce the infrastructure and operation cost of the power grid, flexible and controllable...... of the power sector in mind and thus can differ significantly in their architecture, their integration into the various markets, their integration into distribution network operation and several other aspects. This paper proposes a classification of load control policies for demand side management in smart...... buildings, based on external behavior: direct, indirect, transactional and autonomous control; internal operation: decision support system scope, control strategy, failure handling and architecture. This classification assists in providing an overview of the control schemes as well as different ways...

  10. An Enhanced System Architecture for Optimized Demand Side Management in Smart Grid

    Directory of Open Access Journals (Sweden)

    Anzar Mahmood

    2016-04-01

    Full Text Available Demand Side Management (DSM through optimization of home energy consumption in the smart grid environment is now one of the well-known research areas. Appliance scheduling has been done through many different algorithms to reduce peak load and, consequently, the Peak to Average Ratio (PAR. This paper presents a Comprehensive Home Energy Management Architecture (CHEMA with integration of multiple appliance scheduling options and enhanced load categorization in a smart grid environment. The CHEMA model consists of six layers and has been modeled in Simulink with an embedded MATLAB code. A single Knapsack optimization technique is used for scheduling and four different cases of cost reduction are modeled at the second layer of CHEMA. Fault identification and electricity theft control have also been added in CHEMA. Furthermore, carbon footprint calculations have been incorporated in order to make the users aware of environmental concerns. Simulation results prove the effectiveness of the proposed model.

  11. US EPA's photovoltaic demand-side management project. Report for September 1992-July 1993

    International Nuclear Information System (INIS)

    Kern, E.C.; Spiegel, R.J.

    1993-01-01

    The paper discusses an investigation of how photovoltaics (PV) may be used as both a pollution-mitigating energy replacement for fossil fuels and a demand-side management (DSM) option to reduce peak electrical demands of commercial and residential buildings. Eleven electric utilities are partners in this first nationwide demonstration of PV DSM. The approach is to install and monitor standardized PV systems in diverse geographic areas with varying solar energy resource and electric power demand, production, and cost conditions. The systems are being monitored for a year to record direct and diffuse irradiance, ambient air temperature, PV power generation, and building loads. Utilities are providing the electric system operations data needed to determine the pollution mitigation and peak demand reduction that can result from the PV electrical power generation

  12. Principles concerning the progress of the gas demand side management in Romania

    International Nuclear Information System (INIS)

    Leca, A.; Statie, E.; Nistoran, D.

    1996-01-01

    The consequences of the application of demand side management (DSM) and integrated resources planning (IRP) notions for natural gas are analysed. Present socio-economic context in Romania - from a geopolitical point of view - obviously highlights a set of difficult gas supply problems in our country related to: the impossibility of satisfying the consumption demand from internal resources; the necessity of ensuring by imports of an important quantity of gas, which entails an important foreign currency expenditure and possible political pressures which an unique supplier could exert; the requirement of alignment to the western European country legislation, at an institutional and economical practice level. Each of these problems related to the gas-based power production and all together impose the tackling of DSM and IRP requirements from a strategic point of view. Some conclusions and proposals are presented. (author) 1 fig., 4 refs

  13. An Improved Fuzzy C-Means Algorithm for the Implementation of Demand Side Management Measures

    Directory of Open Access Journals (Sweden)

    Ioannis Panapakidis

    2017-09-01

    Full Text Available Load profiling refers to a procedure that leads to the formulation of daily load curves and consumer classes regarding the similarity of the curve shapes. This procedure incorporates a set of unsupervised machine learning algorithms. While many crisp clustering algorithms have been proposed for grouping load curves into clusters, only one soft clustering algorithm is utilized for the aforementioned purpose, namely the Fuzzy C-Means (FCM algorithm. Since the benefits of soft clustering are demonstrated in a variety of applications, the potential of introducing a novel modification of the FCM in the electricity consumer clustering process is examined. Additionally, this paper proposes a novel Demand Side Management (DSM strategy for load management of consumers that are eligible for the implementation of Real-Time Pricing (RTP schemes. The DSM strategy is formulated as a constrained optimization problem that can be easily solved and therefore, making it a useful tool for retailers’ decision-making framework in competitive electricity markets.

  14. Multicriteria evaluation of demand side management (DSM) implementation strategies in the Indian power sector

    Energy Technology Data Exchange (ETDEWEB)

    Vashishtha, Sanjay [Centre for Renewable Energy and Environmental Development (CREED), BITS, Pilani, Rajasthan 333031 (India); Ramachandran, M. [BITS Pilani Dubai Centre, Dubai (United Arab Emirates)

    2006-09-15

    In recent years, demand side management (DSM) has emerged as an efficient utility planning strategy for reducing capacity shortages and improving system load factors. The Indian government is adopting various policies to implement DSM programs. DSM implementation involves a variety of interests with conflicting objectives, and a range of possible implementation strategies with varying implications for effectiveness, cost, feasibility, efficiency and stakeholder acceptance. This necessitates a critical comparison of the strategies to determine a preferred strategy or combination of strategies from each specific stakeholder's point of view. The present study evaluates DSM implementation strategies from a multiobjective perspective using the Analytic Hierarchy Process (AHP). Eight strategies and six criteria were considered. Forty utility, regulator, and consumer stakeholders were surveyed. The most highly ranked strategies involved creating dedicated funds and providing technical support to end users for effective implementation of DSM. (author)

  15. Communications technologies for demand side management, DSM, and European utility communications architecture, EurUCA

    Energy Technology Data Exchange (ETDEWEB)

    Kaerkkaeinen, S; Kekkonen, V [VTT Energy, Espoo (Finland); Rissanen, P [Tietosavo Oy (Finland)

    1997-12-31

    In this project the main target is to develop and assess methods for DSM (Demand Side Management) and distribution automation planning from the utility`s point of view. The final goal is to integrate these methods for the strategic planning of electric utilities. In practice the project is divided into four main parts: The development and assessment of DSM/IRP planning methods and cost/benefit analysis as a part of international co-operation (IEA DSM Agreement: Annex IV, European Cost/Benefit analysis of DSM, EUBC, and Finnish SAVE-project started in 1995 in co-operation with SRC International and six electric utilities in Finland); Development of PC-based DSM planning and assessment tools at VTT; Development of a decision support system of distribution network planning including DSM options at Tietosavo Oy and Integration of DSM planning and network planning tools in co-operation with VTT Energy and Tietosavo Oy

  16. Hawaii demand-side management resource assessment. Final report: DSM opportunity report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    The Hawaii Demand-Side Management Resource Assessment was the fourth of seven projects in the Hawaii Energy Strategy (HES) program. HES was designed by the Department of Business, Economic Development, and Tourism (DBEDT) to produce an integrated energy strategy for the State of Hawaii. The purpose of Project 4 was to develop a comprehensive assessment of Hawaii`s demand-side management (DSM) resources. To meet this objective, the project was divided into two phases. The first phase included development of a DSM technology database and the identification of Hawaii commercial building characteristics through on-site audits. These Phase 1 products were then used in Phase 2 to identify expected energy impacts from DSM measures in typical residential and commercial buildings in Hawaii. The building energy simulation model DOE-2.1E was utilized to identify the DSM energy impacts. More detailed information on the typical buildings and the DOE-2.1E modeling effort is available in Reference Volume 1, ``Building Prototype Analysis``. In addition to the DOE-2.1E analysis, estimates of residential and commercial sector gas and electric DSM potential for the four counties of Honolulu, Hawaii, Maui, and Kauai through 2014 were forecasted by the new DBEDT DSM Assessment Model. Results from DBEDTs energy forecasting model, ENERGY 2020, were linked with results from DOE-2.1E building energy simulation runs and estimates of DSM measure impacts, costs, lifetime, and anticipated market penetration rates in the DBEDT DSM Model. Through its algorithms, estimates of DSM potential for each forecast year were developed. Using the load shape information from the DOE-2.1E simulation runs, estimates of electric peak demand impacts were developed. 10 figs., 55 tabs.

  17. DSM [demand-side management] opportunities in Alberta: An economist's perspective

    International Nuclear Information System (INIS)

    Woodward, R.S.

    1990-01-01

    In Alberta, utility companies are placing increasing attention on demand-side management (DSM) as one option for meeting future demand. Some basic economic principles are provided to yield a guideline on how much a utility should be spending on DSM initiatives. For the case of financial incentives to customers, it is shown that subsidies based on sound economic principles will enable the utility to charge lower overall rates to customers receiving the subsidy without raising other customers' rates. Moving outside of a well-understood market-based system and into a fully centralized planning approach to DSM eliminates a critical link between utilities and their customers. In Alberta, DSM measures appropriate in other regions will not be appropriate due to the province's unique supply and demand characteristics. Most of Alberta's electricity supply comes from low-cost coal-fired plants. On the demand-side, there is a significant concentration of large industrial and commercial consumers, notably in the oil and gas industry, and there is essentially no demand for electric heating in homes since natural gas is very abundant. The Alberta integrated power system currently operates at a load factor of ca 77%, reflecting the large industrial demand and the absence of a winter peaking effect associated with electrical heating requirements. A relatively small difference in embedded and incremental electricity supply costs means that utilities have little to spend on DSM programs. The identification of cost-effective DSM opportunities, most of which are likely to be found in the industrial sector, requires a considerable amount of detailed information on consumer behavior and close collaboration between utility and customer

  18. Hawaii demand-side management resource assessment. Final report, Reference Volume 1: Building prototype analysis

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    This report provides a detailed description of, and the baseline assumptions and simulation results for, the building prototype simulations conducted for the building types designated in the Work Plan for Demand-side Management Assessment of Hawaii`s Demand-Side Resources (HES-4, Phase 2). This report represents the second revision to the initial building prototype description report provided to DBEDT early in the project. Modifications and revisions to the prototypes, based on further calibration efforts and on comments received from DBEDT Staff have been incorporated into this final version. These baseline prototypes form the basis upon which the DSM measure impact estimates and the DSM measure data base were developed for this project. This report presents detailed information for each of the 17 different building prototypes developed for use with the DOE-21E program (23 buildings in total, including resorts and hotels defined separately for each island) to estimate the impact of the building technologies and measures included in this project. The remainder of this section presents some nomenclature and terminology utilized in the reports, tables, and data bases developed from this project to denote building type and vintage. Section 2 contains a more detailed discussion of the data sources, the definition of the residential sector building prototypes, and results of the DOE-2 analysis. Section 3 provides a similar discussion for the commercial sector. The prototype and baseline simulation results are presented in a separate section for each building type. Where possible, comparison of the baseline simulation results with benchmark data from the ENERGY 2020 model or other demand forecasting models specific to Hawaii is included for each building. Appendix A contains a detailed listing of the commercial sector baseline indoor lighting technologies included in the existing and new prototypes by building type.

  19. Incentive-compatible demand-side management for smart grids based on review strategies

    Science.gov (United States)

    Xu, Jie; van der Schaar, Mihaela

    2015-12-01

    Demand-side load management is able to significantly improve the energy efficiency of smart grids. Since the electricity production cost depends on the aggregate energy usage of multiple consumers, an important incentive problem emerges: self-interested consumers want to increase their own utilities by consuming more than the socially optimal amount of energy during peak hours since the increased cost is shared among the entire set of consumers. To incentivize self-interested consumers to take the socially optimal scheduling actions, we design a new class of protocols based on review strategies. These strategies work as follows: first, a review stage takes place in which a statistical test is performed based on the daily prices of the previous billing cycle to determine whether or not the other consumers schedule their electricity loads in a socially optimal way. If the test fails, the consumers trigger a punishment phase in which, for a certain time, they adjust their energy scheduling in such a way that everybody in the consumer set is punished due to an increased price. Using a carefully designed protocol based on such review strategies, consumers then have incentives to take the socially optimal load scheduling to avoid entering this punishment phase. We rigorously characterize the impact of deploying protocols based on review strategies on the system's as well as the users' performance and determine the optimal design (optimal billing cycle, punishment length, etc.) for various smart grid deployment scenarios. Even though this paper considers a simplified smart grid model, our analysis provides important and useful insights for designing incentive-compatible demand-side management schemes based on aggregate energy usage information in a variety of practical scenarios.

  20. Impact of energy storage in buildings on electricity demand side management

    International Nuclear Information System (INIS)

    Qureshi, Waqar A.; Nair, Nirmal-Kumar C.; Farid, Mohammad M.

    2011-01-01

    Research highlights: → Phase change material (PCM) application for space heating has been implemented and assessed for built environment. → Real-Time Pricing (RTP) is assessed as tool to implement Demand Side Management programs effectively. → Two buildings, with and without PCM, have been compared for space heating using RTP in functional electricity market. → PCM found to offer peak load shifting, energy conservation, and reduction in price of electricity. -- Abstract: This paper assesses impact of using phase change materials (PCM) in buildings to leverage its thermal energy storage capability. The emphasis is from an electricity demand side perspective with case studies that incorporates wholesale electricity market data of New Zealand. The results presented in this paper show that for space heating application significant advantages could be obtained using PCM built structures. These positive impacts include peak load shifting, energy conservation and reduction in peak demand for network line companies and potential reduction in electricity consumption and savings for residential customers. This paper uses a testing facility that consists of two identically designed and shaped offices built at Tamaki Campus location of the University of Auckland, New Zealand. The walls and ceilings of one office are finished with ordinary gypsum boards while the interior of the other office is finished with PCM impregnated gypsum boards. Controlled heating facility is provided in both the offices for maintaining temperature within the range of human comfort. This facility is equipped with advanced data acquisition equipment for data monitoring and archiving both locally within the offices and also remotely. Through actual observations and analysis this paper demonstrates two major impacts of DSM. First, the application of phase change material (PCM) in building environment enabling efficient thermal storage to achieve some reduction in the overall electrical energy

  1. Utilizing a programmatic focus on energy efficiency and customer feedback to improve the effectiveness of demand side management

    International Nuclear Information System (INIS)

    Smith, S.; Tharp, A.

    2006-01-01

    A project to encourage effective demand side management (DSM) programs through price-responsive load management was presented. The project was conducted through literature searches, surveys of utility programs and interviews with experts. National security, environmental awareness and economic factors were identified as the primary drivers for DSM. A overview of DSM strategies included details of: price responsive programs; power buyback; direct load control; and conservation-based rebates. Target sectors for DSM programs were divided into 4 sectors: (1) residential; (2) agricultural; (3) commercial/industrial; and (4) institutional. A customer decision cycle for DSM was presented, and various programs were evaluated. A comparison between DR and energy efficiency programs in the United States suggested that an increased focus on energy efficiency will benefit DR programs. However, perception of risk due to pricing exposure and the potential for loss of comfort are significant barriers to effective DSM. Studies have shown that DSM is most effective when participants receive direct feedback on consumption. Simple mechanisms for alerting participants of peak periods were recommended, as well as disaggregation tools to highlight areas of high energy usage and spotlight corrective measures. National and regional coordination of DSM activities was also recommended. It was concluded that DSM programs are successful when both customers and suppliers have an equal stake in their success. refs., tabs., figs

  2. Supply shortage forecast in Ontario: The significance of demand-side management (DSM); its tools and techniques

    International Nuclear Information System (INIS)

    Saini, S.

    2004-01-01

    Aspects of the recent report by the Ontario Electricity Conservation and Supply Task Force and Independent Market Operator which forecasts acute power supply shortages in Ontario, are discussed. Immediate action is recommended to avert the problem. The principal recommendation concerns the adoption of Demand Side Management as a tool to reduce the widening gap between supply and demand, citing supply shortage, imports, high prices, deregulated market and environmental concerns as the driving forces which push for the adoption of DSM. It is claimed that DSM, through its tools such as Demand/Load Response Programs and Time-of-Use rates has the capacity to create the necessary balance between supply and demand more efficiently, and in a more timely fashion than supply side management. The demand for adoption of DSM is justified on the basis of a careful examination of the magnitude and significance of each of the driving forces affecting the electricity supply in Ontario, as well as the benefits and techniques of DSM designed to manage power shortages. Energy Conservation and Efficiency and Demand/Load Response Programs are discussed as the principal DSM techniques, while Dynamic/Real Time Pricing, Time-of-Use Rates, Automated /Smart Metering, Web-based/Communication Systems, Reliability-based Programs, Market/Price-based programs, and Types of Load Control are described as the principal tools used by DSM. DSM program approaches and strategies are also reviewed, along with a brief list of successful examples of DSM applications. 3 figs

  3. Supply shortage forecast in Ontario: The significance of demand-side management (DSM); its tools and techniques

    Energy Technology Data Exchange (ETDEWEB)

    Saini, S.

    2004-06-01

    Aspects of the recent report by the Ontario Electricity Conservation and Supply Task Force and Independent Market Operator which forecasts acute power supply shortages in Ontario, are discussed. Immediate action is recommended to avert the problem. The principal recommendation concerns the adoption of Demand Side Management as a tool to reduce the widening gap between supply and demand, citing supply shortage, imports, high prices, deregulated market and environmental concerns as the driving forces which push for the adoption of DSM. It is claimed that DSM, through its tools such as Demand/Load Response Programs and Time-of-Use rates has the capacity to create the necessary balance between supply and demand more efficiently, and in a more timely fashion than supply side management. The demand for adoption of DSM is justified on the basis of a careful examination of the magnitude and significance of each of the driving forces affecting the electricity supply in Ontario, as well as the benefits and techniques of DSM designed to manage power shortages. Energy Conservation and Efficiency and Demand/Load Response Programs are discussed as the principal DSM techniques, while Dynamic/Real Time Pricing, Time-of-Use Rates, Automated /Smart Metering, Web-based/Communication Systems, Reliability-based Programs, Market/Price-based programs, and Types of Load Control are described as the principal tools used by DSM. DSM program approaches and strategies are also reviewed, along with a brief list of successful examples of DSM applications. 3 figs.

  4. Demand Side Management in an Integrated Electricity Market: What are the Impacts on Generation and Environmental Concerns?

    International Nuclear Information System (INIS)

    Bergaentzle, Claire; Clastres, Cedric

    2013-05-01

    Smart Grid technology appears necessary to succeed in activating the demand through demand side management (DSM) programs. This would in turn improve energy efficiency and achieve environmental targets through controlled consumption. The many pilot projects led worldwide involving smart grids technology, brought quantitative evaluations of DSM measures on electricity load. Efficient DSM instruments must be fine-tuned to respond to very specific issues arising from the generation mix, the integration of intermittent energies or the level of outage risks faced during peak period. Efficient DSM strategies are illustrated through a model involving five countries that carry these different features and under the assumptions of isolated and fully interconnected markets. This paper aims at bringing recommendations regarding the instruments that should be implemented to maximize the benefits of smart grids technology and demand response. Finally, it tends to emphasis the issue of homogenized energy efficiency policies, critical in the building of internal energy markets such as the one the European Union is envisioning. (authors)

  5. Addressing maternal healthcare through demand side financial incentives: experience of Janani Suraksha Yojana program in India.

    Science.gov (United States)

    Gopalan, Saji S; Durairaj, Varatharajan

    2012-09-15

    Demand side financing (DSF) is a widely employed strategy to enhance utilization of healthcare. The impact of DSF on health care seeking in general and that of maternal care in particular is already known. Yet, its effect on financial access to care, out-of-pocket spending (OOPS) and provider motivations is not considerably established. Without such evidence, DSFs may not be recommendable to build up any sustainable healthcare delivery approach. This study explores the above aspects on India's Janani Suraksha Yojana (JSY) program. This study employed design and was conducted in three districts of Orissa, selected through a three-stage stratified sampling. The quantitative method was used to review the Health Management Information System (HMIS). The qualitative methods included focus groups discussions with beneficiaries (n = 19) and community intermediaries (n = 9), and interviews (n = 7) with Ministry of Health officials. HMIS data enabled to review maternal healthcare utilization. Group discussions and interviews explored the perceived impact of JSY on in-facility delivery, OOPS, healthcare costs, quality of care and performance motivation of community health workers. The number of institutional deliveries, ante-and post-natal care visits increased after the introduction of JSY with an annual net growth of 18.1%, 3.6% and 5% respectively. The financial incentive provided partial financial risk-protection as it could cover only 25.5% of the maternal healthcare cost of the beneficiaries in rural areas and 14.3% in urban areas. The incentive induced fresh out-of-pocket spending for some mothers and it could not address maternal care requirements comprehensively. An activity-based community worker model was encouraging to augment maternal healthcare consumption. However, the existing level of financial incentives and systemic support were inadequate to motivate the volunteers optimally on their performance. Demand side financial incentive could enhance financial

  6. Demand side management for commercial buildings using an in line heat pump water heating methodology

    International Nuclear Information System (INIS)

    Rankin, Riaan; Rousseau, Pieter G.; Eldik, Martin van

    2004-01-01

    Most of the sanitary hot water used in South African buildings is heated by means of direct electrical resistance heaters. This is one of the major contributors to the undesirably high morning and afternoon peaks imposed on the national electricity supply grid. For this reason, water heating continues to be of concern to the electricity supplier, ESCOM. Previous studies, conducted by the Potchefstroom University for Christian Higher Education in South Africa, indicated that extensive application of the so called inline heat pump water heating methodology in commercial buildings could result in significant demand side management savings to ESKOM. Furthermore, impressive paybacks can be obtained by building owners who choose to implement the design methodology on existing or new systems. Currently, a few examples exist where the design methodology has been successfully implemented. These installations are monitored with a fully web centric monitoring system that allows 24 h access to data from each installation. Based on these preliminary results, a total peak demand reduction of 108 MW can be achieved, which represents 18% of the peak load reduction target set by ESKOM until the year 2015. This represents an avoided cost of approximately MR324 (ZAR) [Int J Energy Res 25(4) (1999) 2000]. Results based on actual data from the monitored installations shows a significant peak demand reduction for each installation. In one installation, a hotel with an occupancy of 220 people, the peak demand contribution of the hot water installation was reduced by 86%, realizing a 36% reduction in peak demand for the whole building. The savings incurred by the building owner also included significant energy consumption savings due to the superior energy efficiency of the heat pump water heater. The combined savings result in a conservatively calculated straight payback period of 12.5 months, with an internal rate of return of 98%. The actual cost of water heating is studied by

  7. Addressing maternal healthcare through demand side financial incentives: experience of Janani Suraksha Yojana program in India

    Directory of Open Access Journals (Sweden)

    Gopalan Saji S

    2012-09-01

    Full Text Available Abstract Background Demand side financing (DSF is a widely employed strategy to enhance utilization of healthcare. The impact of DSF on health care seeking in general and that of maternal care in particular is already known. Yet, its effect on financial access to care, out-of-pocket spending (OOPS and provider motivations is not considerably established. Without such evidence, DSFs may not be recommendable to build up any sustainable healthcare delivery approach. This study explores the above aspects on India’s Janani Suraksha Yojana (JSY program. Methods This study employed design and was conducted in three districts of Orissa, selected through a three-stage stratified sampling. The quantitative method was used to review the Health Management Information System (HMIS. The qualitative methods included focus groups discussions with beneficiaries (n = 19 and community intermediaries (n = 9, and interviews (n = 7 with Ministry of Health officials. HMIS data enabled to review maternal healthcare utilization. Group discussions and interviews explored the perceived impact of JSY on in-facility delivery, OOPS, healthcare costs, quality of care and performance motivation of community health workers. Results The number of institutional deliveries, ante-and post-natal care visits increased after the introduction of JSY with an annual net growth of 18.1%, 3.6% and 5% respectively. The financial incentive provided partial financial risk-protection as it could cover only 25.5% of the maternal healthcare cost of the beneficiaries in rural areas and 14.3% in urban areas. The incentive induced fresh out-of-pocket spending for some mothers and it could not address maternal care requirements comprehensively. An activity-based community worker model was encouraging to augment maternal healthcare consumption. However, the existing level of financial incentives and systemic support were inadequate to motivate the volunteers optimally on their

  8. Analysis of Cool Roof Coatings for Residential Demand Side Management in Tropical Australia

    Directory of Open Access Journals (Sweden)

    Wendy Miller

    2015-06-01

    Full Text Available Cool roof coatings have a beneficial impact on reducing the heat load of a range of building types, resulting in reduced cooling energy loads. This study seeks to understand the extent to which cool roof coatings could be used as a residential demand side management (DSM strategy for retrofitting existing housing in a constrained network area in tropical Australia where peak electrical demand is heavily influenced by residential cooling loads. In particular this study seeks to determine whether simulation software used for building regulation purposes can provide networks with the ‘impact certainty’ required by their DSM principles. The building simulation method is supported by a field experiment. Both numerical and experimental data confirm reductions in total consumption (kWh and energy demand (kW. The nature of the regulated simulation software, combined with the diverse nature of residential buildings and their patterns of occupancy, however, mean that simulated results cannot be extrapolated to quantify benefits to a broader distribution network. The study suggests that building data gained from regulatory simulations could be a useful guide for potential impacts of widespread application of cool roof coatings in this region. The practical realization of these positive impacts, however, would require changes to the current business model for the evaluation of DSM strategies. The study provides seven key recommendations that encourage distribution networks to think beyond their infrastructure boundaries, recognising that the broader energy system also includes buildings, appliances and people.

  9. Exploring Community-Oriented Approaches in Demand Side Management Projects in Europe

    Directory of Open Access Journals (Sweden)

    Anna Mengolini

    2016-12-01

    Full Text Available This paper seeks to investigate if the theoretical and political trends towards a more collective dimension of energy use are reflected in the design and development of demand side management (DSM pilot projects in Europe. Specifically, the paper analyses DSM projects in the database of the Joint Research Centre (JRC of the European Commission to capture signs of a new attention towards the wider context in which consumers live and towards the social dimension associated with energy consumption. To this end, the paper investigates the projects’ scope (in terms of project’s partners, end-use sectors and targeted services as well as the consumer engagement strategies that projects use. These elements reflect the projects’ consideration for the socio-economic dimension of the community where the pilots take place and their inclination to build on community dynamics. The analysis shows that DSM projects in the EU are increasingly being designed and developed with a collegial approach to energy consumption in mind, although an integrated approach is still missing. In addition, research is still needed to link the use of this innovative approach to project results. A closer look at the developments and results of these projects can help to identify what works and what doesn’t in real life experiences, thus supporting effective policy making at the EU and national level.

  10. A scoping study: demand side measures on the UK electrical system

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-07-01

    The study is intended to eventually bring about a number of improvements in the UK electrical system, particularly in regard to Demand Side Management (DSM). Among the benefits envisaged are (a) increased security of supply when the network is under stress; (b) reduction in costs; (c) simpler outage management; (d) carbon saving and (e) increased energy efficiency. So far, these potential benefits have attracted little attention in the residential and small business sectors of the market: suggested reasons for this are listed. Taking into account the experience of other countries, three options are presented for a UK DSM programme: they are (i) customer initiated; (ii) supplier initiated and (iii) distributor initiated. At present, all the suggested options need further study and to aid the development for small customers, five possible initiatives are suggested. This final report (95 pages) includes a detailed description of the research required and a tender process for a customer-initiated programme. The report was prepared by KEMA Limited under contract to the DTI.

  11. Impacts of Demand-Side Management on Electrical Power Systems: A Review

    Directory of Open Access Journals (Sweden)

    Hussein Jumma Jabir

    2018-04-01

    Full Text Available Electricity demand has grown over the past few years and will continue to grow in the future. The increase in electricity demand is mainly due to industrialization and the shift from a conventional to a smart-grid paradigm. The number of microgrids, renewable energy sources, plug-in electric vehicles and energy storage systems have also risen in recent years. As a result, future electricity grids have to be revamped and adapt to increasing load levels. Thus, new complications associated with future electrical power systems and technologies must be considered. Demand-side management (DSM programs offer promising solutions to these issues and can considerably improve the reliability and financial performances of electrical power systems. This paper presents a review of various initiatives, techniques, impacts and recent developments of the DSM of electrical power systems. The potential benefits derived by implementing DSM in electrical power networks are presented. An extensive literature survey on the impacts of DSM on the reliability of electrical power systems is also provided for the first time. The research gaps within the broad field of DSM are also identified to provide directions for future work.

  12. Can demand-side policies stop the tobacco industry's damage? Lessons from Turkey.

    Science.gov (United States)

    Gultekin-Karakas, Derya

    2015-01-01

    Trade and investment liberalisation in the post-1980 period allowed the penetration of transnational tobacco companies into the Turkish market. State control over the market was gradually removed and tobacco farming, manufacturing, trade and consumption were reshaped in line with the needs of transnational tobacco companies. The resultant increase in product proliferation and aggressive marketing strategies led to a dramatic rise in cigarette consumption in the 1990s, making Turkey a market with one of the sharpest consumption increases in the world. While Turkey implemented demand-side tobacco control policies to reduce consumption after 1996, it continued to stimulate manufacturing and trade in a conflicting way. The Turkish case verifies that the liberalisation process facilitated by the state under the auspices of international institutions conflicts with tobacco control. Liberalisation paves the way for market expansions of transnational tobacco companies that resist tobacco control in their drive for profit. Current global tobacco control policies, with no interest in controlling manufacturing, have limited effect on consumption. The Turkish case indicates the necessity of establishing public control over tobacco manufacturing and trade from a public health perspective.

  13. Transactive Demand Side Management Programs in Smart Grids with High Penetration of EVs

    Directory of Open Access Journals (Sweden)

    Poria Hasanpor Divshali

    2017-10-01

    Full Text Available Due to environmental concerns, economic issues, and emerging new loads, such as electrical vehicles (EVs, the importance of demand side management (DSM programs has increased in recent years. DSM programs using a dynamic real-time pricing (RTP method can help to adaptively control the electricity consumption. However, the existing RTP methods, particularly when they consider the EVs and the power system constraints, have many limitations, such as computational complexity and the need for centralized control. Therefore, a new transactive DSM program is proposed in this paper using an imperfect competition model with high EV penetration levels. In particular, a heuristic two-stage iterative method, considering the influence of decisions made independently by customers to minimize their own costs, is developed to find the market equilibrium quickly in a distributed manner. Simulations in the IEEE 37-bus system with 1141 customers and 670 EVs are performed to demonstrate the effectiveness of the proposed method. The results show that the proposed method can better manage the EVs and elastic appliances than the existing methods in terms of power constraints and cost. Also, the proposed method can solve the optimization problem quick enough to run in real-time.

  14. Optimization Models and Methods for Demand-Side Management of Residential Users: A Survey

    Directory of Open Access Journals (Sweden)

    Antimo Barbato

    2014-09-01

    Full Text Available The residential sector is currently one of the major contributors to the global energy balance. However, the energy demand of residential users has been so far largely uncontrollable and inelastic with respect to the power grid conditions. With the massive introduction of renewable energy sources and the large variations in energy flows, also the residential sector is required to provide some flexibility in energy use so as to contribute to the stability and efficiency of the electric system. To address this issue, demand management mechanisms can be used to optimally manage the energy resources of customers and their energy demand profiles. A very promising technique is represented by demand-side management (DSM, which consists in a proactive method aimed at making users energy-efficient in the long term. In this paper, we survey the most relevant studies on optimization methods for DSM of residential consumers. Specifically, we review the related literature according to three axes defining contrasting characteristics of the schemes proposed: DSM for individual users versus DSM for cooperative consumers, deterministic DSM versus stochastic DSM and day-ahead DSM versus real-time DSM. Based on this classification, we provide a big picture of the key features of different approaches and techniques and discuss future research directions.

  15. Demand-side mitigation options of the agricultural sector: potential, barriers and ways forward

    Directory of Open Access Journals (Sweden)

    Brunelle Thierry

    2017-01-01

    Full Text Available This paper reviews the potential and barriers of demand-side mitigation options in the agricultural sector based on the recent academic literature and on a survey conducted on a sample of 788 respondents living in France. The mitigation potential of such measures as reducing losses in the food supply chain and shifting diets toward less animal products is estimated to be particularly high, higher, in particular, than supply-side mitigation options. However, to ensure that these measures do not entail a reduction in protein intake, these estimations should consider both caloric and protein units, and take into account the digestibility differentials between protein sources. Our survey shows that people are relatively reluctant to eat more sustainably, preferring to reduce their emissions in other areas such as housing or equipment. This relative reluctance is mainly due to individual perceptions linked to health concerns, taste or habits. Some obstacles could easily be overcome through well-designed policies aiming to, for example, advertise a lower consumption of red meat for health benefits. National governments are, however, rather inactive on this topic, leaving the initiative to the civil society.

  16. A Hybrid Genetic Wind Driven Heuristic Optimization Algorithm for Demand Side Management in Smart Grid

    Directory of Open Access Journals (Sweden)

    Nadeem Javaid

    2017-03-01

    Full Text Available In recent years, demand side management (DSM techniques have been designed for residential, industrial and commercial sectors. These techniques are very effective in flattening the load profile of customers in grid area networks. In this paper, a heuristic algorithms-based energy management controller is designed for a residential area in a smart grid. In essence, five heuristic algorithms (the genetic algorithm (GA, the binary particle swarm optimization (BPSO algorithm, the bacterial foraging optimization algorithm (BFOA, the wind-driven optimization (WDO algorithm and our proposed hybrid genetic wind-driven (GWD algorithm are evaluated. These algorithms are used for scheduling residential loads between peak hours (PHs and off-peak hours (OPHs in a real-time pricing (RTP environment while maximizing user comfort (UC and minimizing both electricity cost and the peak to average ratio (PAR. Moreover, these algorithms are tested in two scenarios: (i scheduling the load of a single home and (ii scheduling the load of multiple homes. Simulation results show that our proposed hybrid GWD algorithm performs better than the other heuristic algorithms in terms of the selected performance metrics.

  17. Distributed Demand Side Management with Battery Storage for Smart Home Energy Scheduling

    Directory of Open Access Journals (Sweden)

    Omowunmi Mary Longe

    2017-01-01

    Full Text Available The role of Demand Side Management (DSM with Distributed Energy Storage (DES has been gaining attention in recent studies due to the impact of the latter on energy management in the smart grid. In this work, an Energy Scheduling and Distributed Storage (ESDS algorithm is proposed to be installed into the smart meters of Time-of-Use (TOU pricing consumers possessing in-home energy storage devices. Source of energy supply to the smart home appliances was optimized between the utility grid and the DES device depending on energy tariff and consumer demand satisfaction information. This is to minimize consumer energy expenditure and maximize demand satisfaction simultaneously. The ESDS algorithm was found to offer consumer-friendly and utility-friendly enhancements to the DSM program such as energy, financial, and investment savings, reduced/eliminated consumer dissatisfaction even at peak periods, Peak-to-Average-Ratio (PAR demand reduction, grid energy sustainability, socio-economic benefits, and other associated benefits such as environmental-friendliness.

  18. Electric power market liberalization and demand-side management (DSM); Denryoku shijo jiyuka to DSM

    Energy Technology Data Exchange (ETDEWEB)

    Yajima, M. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1997-01-30

    This paper explains effects of market liberalization which will lead to introducing competition in electric power business on demand-side management (DSM), by quoting examples mainly in the United States. The paper also describes the future outlook thereon. The DSM program in the United States has expanded for the period between 1989 through 1994. However, during the last few years, the movements of electric power market liberalization have come to force electric power business entities to change their management strategies and reduction in expense. This situation has resulted in reduction in the DSM budget. Future DSM programs are thought to diversify into the following types: a program such as load management which has effect of reducing expenses and investments in investment time periods of 5 to 10 years, a program effective for users such as high-efficiency motors which have effects of reducing expenses and improving efficiency in investment time periods of 3 to 5 years, a program which will be effective enough if market barriers are removed after the market conversions, but requires subsidies and purchase guarantees, and a social program intended for environmental effects and low-income users. 4 refs., 1 tab.

  19. A scoping study: demand side measures on the UK electrical system

    International Nuclear Information System (INIS)

    2005-01-01

    The study is intended to eventually bring about a number of improvements in the UK electrical system, particularly in regard to Demand Side Management (DSM). Among the benefits envisaged are (a) increased security of supply when the network is under stress; (b) reduction in costs; (c) simpler outage management; (d) carbon saving and (e) increased energy efficiency. So far, these potential benefits have attracted little attention in the residential and small business sectors of the market: suggested reasons for this are listed. Taking into account the experience of other countries, three options are presented for a UK DSM programme: they are (i) customer initiated; (ii) supplier initiated and (iii) distributor initiated. At present, all the suggested options need further study and to aid the development for small customers, five possible initiatives are suggested. This final report (95 pages) includes a detailed description of the research required and a tender process for a customer-initiated programme. The report was prepared by KEMA Limited under contract to the DTI

  20. Energy Refurbishment of an Office Building with Hybrid Photovoltaic System and Demand-Side Management

    Directory of Open Access Journals (Sweden)

    Giovani Almeida Dávi

    2017-08-01

    Full Text Available On-site photovoltaic (PV and battery systems intend to improve buildings energy performance, however battery costs and monetary incentives are a major drawback for the introduction of these technologies into the electricity grids. This paper proposes an energy refurbishment of an office building based on multi-objective simulations. An innovative demand-side management approach is analyzed through the PV and battery control with the purpose of reducing grid power peaks and grid imported energy, as well as improving the project economy. Optimization results of load matching and grid interaction parameters, complemented with an economic analysis, are investigated in different scenarios. By means of battery use, the equivalent use of the grid connection is reduced by 12%, enhancing the grid interaction potential, and 10% of load matching rates can be increased. Project improvements indicate the grid connection capacity can be reduced by 13% and significant savings of up to 48% are achieved on yearly bills. The economy demonstrates the grid parity is only achieved for battery costs below 100 €/kWh and the payback period is large: 28 years. In the case with only PV system, the grid parity achieves better outcomes and the payback time is reduced by a half, making this a more attractive option.

  1. Distributed Optimisation Algorithm for Demand Side Management in a Grid-Connected Smart Microgrid

    Directory of Open Access Journals (Sweden)

    Omowunmi Mary Longe

    2017-06-01

    Full Text Available The contributions of Distributed Energy Generation (DEG and Distributed Energy Storage (DES for Demand Side Management (DSM purposes in a smart macrogrid or microgrid cannot be over-emphasised. However, standalone DEG and DES can lead to under-utilisation of energy generation by consumers and financial investments; in grid-connection mode, though, DEG and DES can offer arbitrage opportunities for consumers and utility provider(s. A grid-connected smart microgrid comprising heterogeneous (active and passive smart consumers, electric vehicles and a large-scale centralised energy storage is considered in this paper. Efficient energy management by each smart entity is carried out by the proposed Microgrid Energy Management Distributed Optimisation Algorithm (MEM-DOA installed distributively within the network according to consumer type. Each smart consumer optimises its energy consumption and trading for comfort (demand satisfaction and profit. The proposed model was observed to yield better consumer satisfaction, higher financial savings, and reduced Peak-to-Average-Ratio (PAR demand on the utility grid. Other associated benefits of the model include reduced investment on peaker plants, grid reliability and environmental benefits. The MEM-DOA also offered participating smart consumers energy and tariff incentives so that passive smart consumers do not benefit more than active smart consumers, as was the case with some previous energy management algorithms.

  2. Albedo and vegetation demand-side management options for warm climates

    International Nuclear Information System (INIS)

    Hall, Darwin C.

    1997-01-01

    For electric utilities, demand-side management (DSM) can reduce electric load and shift load from peak to off-peak periods. In general, the investor in DSM collects the reward with lower electric bills, excepting a positive externality because of reduced tropospheric and stratospheric air pollution from fossil fuel power plants. In warm climates, DSM options include increasing albedo and vegetation, respectively, by painting surfaces white and planting trees; these DSM options are distinguished from all other DSM options because of ecosystem effects. Ambient temperature falls, mitigating the urban 'heat island', which reduces electric load and ozone formation. The investor in albedo and vegetation DSM options does not collect all of the reward from lower electric bills, since the lower ambient temperature provides savings to all customers who use electricity for air conditioning and refrigeration. Similar to other DSM options, air pollution is also reduced as a result of lower power plant emissions. Complex airshed models and electric utility system dispatch models are applied in this paper to account for some of these ecosystem effects. Unaccounted ecosystem effects remain, stymieing cost effectiveness analysis

  3. A rapid assessment and response approach for socially marketed nutrition commodities in Viet Nam.

    Science.gov (United States)

    Turk, Tahir; Quang, Nguyen Dinh; Nga, Tran Thuy; Phuong, Huynh; Tung, Le Van Anh; Trang, Vu Hoang

    2017-01-01

    The leading cause of death in children in developing countries is protein-energy malnutrition. In Viet Nam, 25.9% of children under 5 experience stunted growth and 6.6% are moderately wasted. Iron deficiency anaemia and vitamin A deficiency contribute to these and other malnutrition conditions. Given these factors, more evidence based approaches are required to improve understanding of current attitudes, opinions and behaviours of mothers with young children, in order to operationalise social marketing of nutrition commodities in Viet Nam. A literature review supported a rapid assessment and response method involving semi-structured interviews with 77 stakeholders and focus group discussions with 80 program beneficiaries from four geographic locations in the north and south of Viet Nam. Discussion agendas were developed to address key program issues with grounded theory utilized for data analysis. Data analysis highlighted challenges and opportunities within the six Ps of social marketing: Supply and demand side issues included: cost and the quality of products, the limited scale of interventions and promotional activities. Policy issues identified related to current policies that inhibited the broader promotion and distribution of micronutrient products, and opportunities for improved dialogue with policy partners. Partnerships further emphasized the need for public private partnerships to support the social change process. Implications for theory, policy, and practice indicates that rapid assessment and response is a cost-effective, pragmatic method of public health research, in resource constrained settings, to explore policies and behaviours amenable to change and build stakeholder engagement in the program.

  4. Smart grids and power systems efficiency: regulatory tools and demand-side management impacts

    International Nuclear Information System (INIS)

    Bergaentzle, Claire

    2015-01-01

    The physical architecture of electricity grids and the organizational structure of power systems implemented after the reforms have traditionally be achieved according to the characteristics of the transmission infrastructures and power mixes. However, the new challenges related to energy transition favor a greater participation of decentralized generation and final consumers to system exploitation and competitive markets. This latter participation is made possible thanks to recent innovations in the fields of communication and remote control technologies. Significant evolutions are expected in power industries that share common characteristics. First, these evolutions suppose massive capital investments to modernize and adapt current power distribution grids. Second, it is expected the activation of distribution grids and final consumers will unleash substantial unexploited economic efficiency gains as well as impose new constraints. Taking these simple facts as a starting point, the objective of the thesis is twofold. In the first place, we provide a theoretical analysis of the regulatory instruments that monitor the system operators' expenses. Relying on the literature, we aim at characterizing what regulatory tools and incitation are suitable for investing in smart grids technologies. Since it is necessary to compare theoretical formulation to facts, we use an empirical approach that allows us to designate key benefits pursued by the development of smart grids and to compare our theoretical results with practical regulatory applications. Our findings eventually allow us to formulate recommendations. In the second place, the thesis focuses on the impacts of demand-side management during peak periods. We structure our approach around two general observations. Large benefits should be generated in lowering substantially peak demand. However, such situation also creates losses of profit for generators. We provide an estimation of efficiency gains and revenue losses

  5. Demonstrating a small utility approach to demand-side program implementation

    Energy Technology Data Exchange (ETDEWEB)

    1991-10-01

    The US DOE awarded a grant to the Burlington Electric Department (B.E.D.) to test a demand-side management (DSM) demonstration program designed to quickly save a significant amount of power with little disruption to the utility's customers or its normal operations. B.E.D. is a small municipal utility located in northern Vermont, with a lengthy history of successful DSM involvement. In our grant application, we proposed to develop a replicable program and approach to DSM that might be useful to other small utilities and to write a report to enable such replication. We believe that this DSM program and/or individual program components are replicable. This report is designed to allow other utilities interested in DSM to replicate this program or specific program design features to meet their DSM goals. We also wanted to use the opportunity of this grant to test the waters of residential heating fuel-switching. We hoped to test the application of one fuel-switching technology, and to benefit from the lessons learned in developing a full-scale DSM program for this end- use. To this end the pilot effort has been very successful. In the pilot pressure we installed direct-vent gas fired space heaters sized as supplemental heating units in 44 residences heated solely by electric resistance heat. We installed the gas space heating units at no cost to the owners or residents. We surveyed participating customers. The results of those surveys are included in this report and preliminary estimates of winter peak capacity load reductions are also noted in this report.

  6. On the Mobile Communication Requirements for the Demand-Side Management of Electric Vehicles

    Directory of Open Access Journals (Sweden)

    Stefano Rinaldi

    2018-05-01

    Full Text Available The rising concerns about global warming and environmental pollution are increasingly pushing towards the replacement of road vehicles powered by Internal Combustion Engines (ICEs. Electric Vehicles (EVs are generally considered the best candidates for this transition, however, existing power grids and EV management systems are not yet ready for a large penetration of EVs, and the current opinion of the scientific community is that further research must be done in this field. The so-called Vehicle-to-Grid (V2G concept plays a relevant role in this scenario by providing the communication capabilities required by advanced control and Demand-Side Management (DSM strategies. Following this research trend, in this paper the communication requirements for the DSM of EVs in urban environments are discussed, by focusing on the mobile communication among EVs and smart grids. A specific system architecture for the DSM of EVs moving inside urban areas is proposed and discussed in terms of the required data throughput. In addition, the use of a Low-Power Wide-Area Network (LPWAN solution—the Long-Range Wide Area Network (LoRaWAN technology—is proposed as a possible alternative to cellular-like solutions, by testing an experimental communication infrastructure in a real environment. The results show that the proposed LPWAN technology is capable to handle an adequate amount of information for the considered application, and that one LoRa base station is able to serve up to 438 EVs per cell, and 1408 EV charging points.

  7. Demonstrating a small utility approach to demand-side program implementation

    International Nuclear Information System (INIS)

    1991-01-01

    The US DOE awarded a grant to the Burlington Electric Department (B.E.D.) to test a demand-side management (DSM) demonstration program designed to quickly save a significant amount of power with little disruption to the utility's customers or its normal operations. B.E.D. is a small municipal utility located in northern Vermont, with a lengthy history of successful DSM involvement. In our grant application, we proposed to develop a replicable program and approach to DSM that might be useful to other small utilities and to write a report to enable such replication. We believe that this DSM program and/or individual program components are replicable. This report is designed to allow other utilities interested in DSM to replicate this program or specific program design features to meet their DSM goals. We also wanted to use the opportunity of this grant to test the waters of residential heating fuel-switching. We hoped to test the application of one fuel-switching technology, and to benefit from the lessons learned in developing a full-scale DSM program for this end- use. To this end the pilot effort has been very successful. In the pilot pressure we installed direct-vent gas fired space heaters sized as supplemental heating units in 44 residences heated solely by electric resistance heat. We installed the gas space heating units at no cost to the owners or residents. We surveyed participating customers. The results of those surveys are included in this report and preliminary estimates of winter peak capacity load reductions are also noted in this report

  8. Domestic demand-side management (DSM): Role of heat pumps and thermal energy storage (TES) systems

    International Nuclear Information System (INIS)

    Arteconi, A.; Hewitt, N.J.; Polonara, F.

    2013-01-01

    Heat pumps are seen as a promising technology for load management in the built environment, in combination with the smart grid concept. They can be coupled with thermal energy storage (TES) systems to shift electrical loads from high-peak to off-peak hours, thus serving as a powerful tool in demand-side management (DSM). This paper analyzes heat pumps with radiators or underfloor heating distribution systems coupled with TES with a view to showing how a heat pump system behaves and how it influences the building occupants' thermal comfort under a DSM strategy designed to flatten the shape of the electricity load curve by switching off the heat pump during peak hours (16:00–19:00). The reference scenario for the analysis was Northern Ireland (UK). The results showed that the heat pump is a good tool for the purposes of DSM, also thanks to the use of TES systems, in particular with heating distribution systems that have a low thermal inertia, e.g. radiators. It proved possible to achieve a good control of the indoor temperature, even if the heat pump was turned off for 3 h, and to reduce the electricity bill if a “time of use” tariff structure was adopted. -- Highlights: ► Heat pump heating systems with thermal energy storage are considered. ► System behavior is investigated during a DSM strategy for reducing peak energy demand. ► Heat pump heating systems demonstrate to be able to have an active role in DSM programs. ► A TES system must be coupled with the heat pump in presence of low thermal inertia heating distribution systems. ► Central role played by incentives schemes to promote this technology

  9. Determining optimum levels of DSM [demand-side management] as a supply-side resource

    International Nuclear Information System (INIS)

    Giles, S.H.; Mitchell, E.D.

    1990-01-01

    San Diego Gas and Electric Company (SDGE) recommends the evaluation of demand-side management as a supply-side resource. The advantages of concurrent economic analysis of DSM options with other traditional sources represents a significant improvement over analysis either before or after the development of a resource plan. The evaluation of utility-sponsored DSM programs that provide system benefits that include deferment of capacity additions and improvements in more efficient system operation should be evaluated side-by-side with traditional resources that provide similar benefits. The utility decision to either provide capital costs to construct a power plant or make demand payments for a power purchase is directly analogous to the decision to provide funding for a DSM program that would defer these same investments. Both types of decision represent utility control over investment decisions that allow the utility to provide reliable, low-cost power to its customers. SDGE has also had experience with using generation expansion scenarios to test different levels of pre-selected packages of DSM programs, attempting to evaluate the total costs of system expansion for each of the different packages. This method was fraught with problems, and the best information that could be gained was if the selection of DSM packages happened to bracket a lower cost scenario, when it could reasonably be assumed that both smaller and larger levels of DSM were not as cost effective as the intermediate level. However, in many cases the selection of DSM programs did not produce this result and the important question of whether individual DSM programs were worthwhile when evaluated individually, or whether the lowest cost scenario would be improved with more or less DSM, could not be answered

  10. Demand side management—A simulation of household behavior under variable prices

    International Nuclear Information System (INIS)

    Gottwalt, Sebastian; Ketter, Wolfgang; Block, Carsten; Collins, John; Weinhardt, Christof

    2011-01-01

    Within the next years, consumer households will be increasingly equipped with smart metering and intelligent appliances. These technologies are the basis for households to better monitor electricity consumption and to actively control loads in private homes. Demand side management (DSM) can be adopted to private households. We present a simulation model that generates household load profiles under flat tariffs and simulates changes in these profiles when households are equipped with smart appliances and face time-based electricity prices. We investigate the impact of smart appliances and variable prices on electricity bills of a household. We show that for households the savings from equipping them with smart appliances are moderate compared to the required investment. This finding is quite robust with respect to variation of tariff price spreads and to different types of appliance utilization patterns. Finally, our results indicate that electric utilities may face new demand peaks when day-ahead hourly prices are applied. However, a considerable amount of residential load is available for shifting, which is interesting for the utilities to balance demand and supply. - Highlights: ► Our model generates residential load profiles that are based on real world data. ► We simulate changes in load profiles when smart appliances and time-of-use tariffs are applied. ► The economic incentive for households to invest in smart appliances is low. ► Time-of-use tariffs create new, even higher peaks. ► Electric utilities have a large amount of the hourly load available for shifting.

  11. Financial incentives for DSM [demand-side management]: Theory and practice

    International Nuclear Information System (INIS)

    Reid, M.W.

    1990-01-01

    Recent efforts to provide incentives for electric utilities in the USA to undertake demand-side management (DSM) programs are reviewed. The major need for incentives is seen as the overcoming of disincentives inherent in traditional regulation that affect utilities' interest in, and motivation for, DSM programs. These disincentives include the failure to recover all program costs, loss of revenues, and loss of financial opportunity. In addition, utilities seldom perceive DSM as a low-risk proposition; principal areas of concern include regulatory risk, competitive risk, and balance sheet risk. In view of these disincentives and risks, any DSM program therefore should provide for full and timely recovery of all program costs; adjust for DSM-induced revenue losses; and counterbalance risk and loss of financial opportunity by providing a bonus above cost. Three utility-specific incentive proposals are presented for the case of utilities in New York, Massachusetts, and Pennsylvania. Each of these programs meets the goal of overcoming the disincentives that surround utility DSM programs. The most significant differences across the mechanisms are found in the bonus component. Mechanisms that reduce the utility's uncertainty about the receipt of a bonus by providing it in a lump sum will likely prove more powerful motivators than those that spread the bonus out over a period of years. Use of preapproved per-unit or per-customer impact measurements reduces uncertainty and thus increases the apparent value of the bonus. Annual review of program plans and assumed impacts, supported by continuing evaluation activities, minimizes the risk that the utilities will gamble with the system or receive excessive awards. 6 refs

  12. DEMONSTRATION OF THE ENVIRONMENTAL AND DEMAND-SIDE MANAGEMENT BENEFITS OF GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEMS

    Science.gov (United States)

    This study investigated the pollutant emission reduction and demand-side management potential of 16 photovoltaic (PV) systems installed across the U.S. in 1993 and 1994. The project was sponsored by the U.S. Environmental Protection Agency (EPA) and 11 electric utilities. This ar...

  13. Demand-Side Financing in Education: a Critical Examination of a Girls' Scholarship Program in Malawi--(Case Study)

    Science.gov (United States)

    Sineta, Abraham

    2012-01-01

    Despite the push for universal education, many disadvantaged and poor children in developing countries still do not have access to basic education. This among other reasons is due to poverty where poor families cannot afford the cost of basic education even when it is "free" of tuition (McDonald, 2007). Demand-side financing…

  14. Vouchers as demand side financing instruments for health care: a review of the Bangladesh maternal voucher scheme.

    Science.gov (United States)

    Schmidt, Jean-Olivier; Ensor, Tim; Hossain, Atia; Khan, Salam

    2010-07-01

    Demand side financing (DSF) mechanisms transfer purchasing power to specified groups for defined goods and services in order to increase access to specified services. This is an important innovation in health care systems where access remains poor despite substantial subsidies towards the supply side. In Bangladesh, a maternal health DSF pilot in 33 sub-districts was launched in 2007. We report the results of a rapid review of this scheme undertaken during 2008 after 1 year of its setup. Quantitative data collected by DSF committees, facilities and national information systems were assessed alongside qualitative data, i.e. key informant interviews and focus group discussions with beneficiaries and health service providers on the operation of the scheme in 6 sub-districts. The scheme provides vouchers to women distributed by health workers that entitle mainly poor women to receive skilled care at home or a facility and also provide payments for transport and food. After initial setbacks voucher distribution rose quickly. The data also suggest that the rise in facility based delivery appeared to be more rapid in DSF than in other non-DSF areas, although the methods do not allow for a strict causal attribution as there might be co-founding effects. Fears that the financial incentives for surgical delivery would lead to an over emphasis on Caesarean section appear to be unfounded although the trends need further monitoring. DSF provides substantial additional funding to facilities but remains complex to administer, requiring a parallel administrative mechanism putting additional work burden on the health workers. There is little evidence that the mechanism encourages competition due to the limited provision of health care services. The main question outstanding is whether the achievements of the DSF scheme could be achieved more efficiently by adapting the regular government funding rather than creating an entirely new mechanism. Also, improving the quality of health

  15. Demand-side bidding in Brazil; Leilao de eficiencia energetica no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Agenor Gomes Pinto

    2008-01-15

    Since the New Electric Sector Model's conception an energy-efficiency auction, like the ones used to buy new energy, was considered. Recently, the subject has been frequently commented in studies and meetings. This thesis discuss the main issues about its implementation in Brazil and proposes a model for this. The first chapter shows the history and the Electric Sector actual frame, with emphasis in the energy planning, resumed after the 2001 electricity shortage, the structure created for the system expansion and analyses the results of the new energy's auctions until now. The second chapter studies how the energy-efficiency auction can affect agents and consumers and presents the auction theory, which is growing fast in recent years, and how it can be applied to the present case, showing the possible agents' behavior - ESCOs, larger consumers and appliance manufacturers, and its implication on the auction shape. The third chapter shows the past world experience in energy-efficiency selling - the USA DSB (demand-side bidding) and its actual results and an IEA (International Energy Agency) study about this market mechanism of energy-efficiency promotion. 'The DSB works but it's not simple' (Geller, 2006) sums up the main conclusion about DSB - it develops the M and V techniques and the ESCO industry, making energy-efficiency as good as new generation for system's growing. The fourth chapter presents a proposal for the energy-efficiency auction's implementation in Brazil - its opportunity, resources source, regional aspects and the steps to get there. The fifth chapter analyses the M and V 's techniques and shows examples of the four options for projects - the M and V is essential for the auction success and its development, on the other hand, can leverage the energy-efficiency market in Brazil. Finally, the last chapter concludes that the energy-efficiency auction can make a great contribution for energy efficiency and energy planning, but it can't be the only

  16. Demand-side bidding in Brazil; Leilao de eficiencia energetica no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Agenor Gomes Pinto

    2008-01-15

    Since the New Electric Sector Model's conception an energy-efficiency auction, like the ones used to buy new energy, was considered. Recently, the subject has been frequently commented in studies and meetings. This thesis discuss the main issues about its implementation in Brazil and proposes a model for this. The first chapter shows the history and the Electric Sector actual frame, with emphasis in the energy planning, resumed after the 2001 electricity shortage, the structure created for the system expansion and analyses the results of the new energy's auctions until now. The second chapter studies how the energy-efficiency auction can affect agents and consumers and presents the auction theory, which is growing fast in recent years, and how it can be applied to the present case, showing the possible agents' behavior - ESCOs, larger consumers and appliance manufacturers, and its implication on the auction shape. The third chapter shows the past world experience in energy-efficiency selling - the USA DSB (demand-side bidding) and its actual results and an IEA (International Energy Agency) study about this market mechanism of energy-efficiency promotion. 'The DSB works but it's not simple' (Geller, 2006) sums up the main conclusion about DSB - it develops the M and V techniques and the ESCO industry, making energy-efficiency as good as new generation for system's growing. The fourth chapter presents a proposal for the energy-efficiency auction's implementation in Brazil - its opportunity, resources source, regional aspects and the steps to get there. The fifth chapter analyses the M and V 's techniques and shows examples of the four options for projects - the M and V is essential for the auction success and its development, on the other hand, can leverage the energy-efficiency market in Brazil. Finally, the last chapter concludes that the energy-efficiency auction can make a great contribution for energy efficiency and

  17. A novel microgrid demand-side management system for manufacturing facilities

    Science.gov (United States)

    Harper, Terance J.

    Thirty-one percent of annual energy consumption in the United States occurs within the industrial sector, where manufacturing processes account for the largest amount of energy consumption and carbon emissions. For this reason, energy efficiency in manufacturing facilities is increasingly important for reducing operating costs and improving profits. Using microgrids to generate local sustainable power should reduce energy consumption from the main utility grid along with energy costs and carbon emissions. Also, microgrids have the potential to serve as reliable energy generators in international locations where the utility grid is often unstable. For this research, a manufacturing process that had approximately 20 kW of peak demand was matched with a solar photovoltaic array that had a peak output of approximately 3 KW. An innovative Demand-Side Management (DSM) strategy was developed to manage the process loads as part of this smart microgrid system. The DSM algorithm managed the intermittent nature of the microgrid and the instantaneous demand of the manufacturing process. The control algorithm required three input signals; one from the microgrid indicating the availability of renewable energy, another from the manufacturing process indicating energy use as a percent of peak production, and historical data for renewable sources and facility demand. Based on these inputs the algorithm had three modes of operation: normal (business as usual), curtailment (shutting off non-critical loads), and energy storage. The results show that a real-time management of a manufacturing process with a microgrid will reduce electrical consumption and peak demand. The renewable energy system for this research was rated to provide up to 13% of the total manufacturing capacity. With actively managing the process loads with the DSM program alone, electrical consumption from the utility grid was reduced by 17% on average. An additional 24% reduction was accomplished when the microgrid

  18. An electric vehicle dispatch module for demand-side energy participation

    International Nuclear Information System (INIS)

    Zhou, Bowen; Yao, Feng; Littler, Tim; Zhang, Huaguang

    2016-01-01

    Highlights: • Real-time measurement and assessment to calculate EV initial state-of-charge (SOC). • Flexible EV charging allocation using measured available time duration (ATD). • Owner participation using mobile phone apps and a new EV dispatch module. • Online algorithm for real-time calculation of maximum and minimum adjustable limits. • Business-trading models with data security, trending and commercial impacts of EV. - Abstract: The penetration of the electric vehicle (EV) has increased rapidly in recent years mainly as a consequence of advances in transport technology and power electronics and in response to global pressure to reduce carbon emissions and limit fossil fuel consumption. It is widely acknowledged that inappropriate provision and dispatch of EV charging can lead to negative impacts on power system infrastructure. This paper considers EV requirements and proposes a module which uses owner participation, through mobile phone apps and on-board diagnostics II (OBD-II), for scheduled vehicle charging. A multi-EV reference and single-EV real-time response (MRS2R) online algorithm is proposed to calculate the maximum and minimum adjustable limits of necessary capacity, which forms part of decision-making support in power system dispatch. The proposed EV dispatch module is evaluated in a case study and the influence of the mobile app, EV dispatch trending and commercial impact is explored.

  19. A Novel Prosumer-Based Energy Sharing and Management (PESM) Approach for Cooperative Demand Side Management (DSM) in Smart Grid

    OpenAIRE

    Sohail Razzaq; Rehman Zafar; Naveed Ahmed Khan; Asif Raza Butt; Anzar Mahmood

    2016-01-01

    Increasing population and modern lifestyle have raised energy demands globally. Demand Side Management (DSM) is one important tool used to manage energy demands. It employs an advanced power infrastructure along with bi-directional information flow among utilities and users in order to achieve a balanced load curve and minimize demand-supply mismatch. Traditionally, this involves shifting the electricity demand from peak hours to other times of the day in an optimized manner. Multiple users e...

  20. The energy efficiency and demand side management programs as implemented by the energy efficiency division of the department of energy

    International Nuclear Information System (INIS)

    Anunciacion, Jesus C.

    1997-01-01

    The thrust of the Philippine energy sector. specifically the government side, is to involve the active participation of not only all the government agencies involved in energy activities but the private sector as well. This participation shall mean technical and financial participation, directly and indirectly. The Department of Energy is on the process involving the continuing update and development of a Philippine Energy Plan (PEP) which has a 30-year time scope, which will help the country monitor and determine energy supply and demand vis-a-vis the growing demands of an industrializing country like the Philippines. Among the most vital component of the PEP is the thrust to pursue national programs for energy efficiency and demand-side management. Seven energy efficiency sub-programs have been identified for implementation, with a target savings of 623 million barrels of fuel oil equivalent (MMBFOE). A cumulative net savings of 237 billion pesos shall be generated against a total investment cost of 54.5 billion pesos. The Philippine energy sector will continue to develop and implement strategies to promote the efficient utilization of energy which will cover all aspects of the energy industry. The plan is focussed on the training and education of the various sectors on the aspects involved in the implementation of energy efficiency and demand-side management elements on a more aggressive note. The implementation of technical strategies by the department will continue on a higher and more extensive level, these are: energy utilization monitoring, consultancy and engineering services, energy efficiency testing and labelling program, and demand-side management programs for each sector. In summary, the PEP, as anchored in energy efficiency and demand-side management tools, among others, will ensure a continuous energy supply at affordable prices while incorporating environmental and social considerations. (author)

  1. Supply- and Demand-Side Factors Influencing Utilization of Infant and Young Child Feeding Counselling Services in Viet Nam.

    Science.gov (United States)

    Nguyen, Phuong H; Kim, Sunny S; Nguyen, Tuan T; Tran, Lan M; Hajeebhoy, Nemat; Frongillo, Edward A; Ruel, Marie T; Rawat, Rahul; Menon, Purnima

    2016-01-01

    Adequate utilization of services is critical to maximize the impact of counselling on infant and young child feeding (IYCF), but little is known about factors affecting utilization. Our study examined supply- and demand-side factors associated with the utilization of IYCF counselling services in Viet Nam. We used survey data from mothers with children Viet Nam, and may be relevant for increasing and sustaining use of nutrition services in similar contexts.

  2. Supply-side and demand-side policies for biosimilars: an overview in 10 European member states

    OpenAIRE

    R?muzat, C?cile; Kapu?niak, Anna; Caban, Aleksandra; Ionescu, Dan; Radi?re, Guerric; Mendoza, Cyril; Toumi, Mondher

    2017-01-01

    ABSTRACT Objective: This study aimed to provide an overview of biosimilar?policies in 10 EU MSs. Methods: Ten EU MS pharmaceutical markets (Belgium, France, Germany, Greece, Hungary, Italy, Poland, Spain, Sweden, and the UK) were selected. A comprehensive literature review?was performed to identify supply-side and demand-side policies in place in the selected countries. Results: Supply-side policies for biosimilars commonly include price linkage, price re-evaluation, and tendering; the use of...

  3. A Midwest utility's perspective of DSM [demand-side management]: Balancing the needs of customers, shareholders and the environment

    International Nuclear Information System (INIS)

    Collins, G.F.

    1990-01-01

    PSI Energy, a predominately coal-burning Indiana electric utility, is very concerned about the environment and is using demand-side management (DSM) as part of a strategy to balance the sometimes conflicting interests of the environment, the economy, customers and shareholders. Faced with slow growth within its service territory, an abundance of low-cost, high sulfur coal burning baseload capacity, massive future expenditures for acid rain mitigation and a weakened financial state due to a cancelled nuclear project, PSI Energy has taken a novel approach to preserving value for customers, shareholders, the economy and environment. To accomodate Indiana's goal of least cost utility planning, PSI initiated an all-source bidding program in which it solicited bids for peaking capacity or the equivalent. Four parallel but separate solicitations were pursued: combustion turbine manufacturers for PSI owned and operated capacity, other utilities and non-utility generators for purchased power and third parties for demand-side management. PSI's philosophy with respect to bidding can be expressed as: simplicity, flexibility, creativity, partnerships, expeditious and fairness. There is a minimum bid of 5 MW of summer peak demand reduction, and the minimum contract length is 10 years. The entire 550 MW capacity block available to be filled in the program is open to demand-side resources. The ten major evaluation criteria involved in the program are: price, sponsor qualifications, operational impact, marketing plan, technology, financing plan, verification and measurement, form of security, project management plan, and project cost estimates

  4. Market design for rapid demand response

    DEFF Research Database (Denmark)

    Nielsen, Kurt; Tamirat, Tseganesh Wubale

    We suggest a market design for rapid demand response in electricity markets. The solution consists of remotely controlled switches, meters, forecasting models as well as a flexible auction market to set prices and select endusers job by job. The auction market motivates truth-telling and makes...... it simple to involve the endusers in advance and to activate demand response immediately. The collective solution is analyzed and economic simulations are conducted for the case of Kenya. Kenya has been su ering from unreliable electricity supply for many years and companies and households have learned...... to adjust by investments in backup generators. We focus on turning the many private backup generators into a demand response system. The economic simulation focuses on possible distortion introduced by various ways of splitting the generated surplus from the demand response system. An auction run instantly...

  5. Rapid Response Manufacturing (RRM). Final CRADA report

    Energy Technology Data Exchange (ETDEWEB)

    Cain, W.D. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Waddell, W.L. [National Centers for Manufacturing Sciences, Ann Arbor, MI (United States)

    1997-08-28

    A major accomplishment of the Rapid Response Manufacturing (RRM) project was the development of a broad-based generic framework for automating and integrating the design-to-manufacturing activities associated with machined part products. Key components of the framework are a manufacturing model that integrates product and process data in a consistent, minimally redundant manner, an advanced computer-aided engineering working environment, knowledge-based software systems for design, process planning, and manufacturing and new production technologies for making products directly from design application software.

  6. Individual-motivational factors in the acceptability of demand-side and supply-side measures to reduce carbon emissions

    International Nuclear Information System (INIS)

    Poortinga, Wouter; Spence, Alexa; Demski, Christina; Pidgeon, Nick F.

    2012-01-01

    As more than a third of all carbon dioxide emissions in the UK are generated by the domestic sector, individuals need to make drastic changes to their current lifestyle in order to play their part in climate change mitigation. Not only do they need to change their personal behaviour, they also have to accept new low-carbon technologies in order to decarbonise the energy they are using. This study uses an adapted version of the Value–Belief-Norm (VBN) model () to examine individual-motivational factors in the acceptability of demand-side and supply-side strategies to reduce carbon emissions. The study found that environmental identity, climate change concern, and personal norms are all significantly associated with the acceptability of both demand-side measures and supply-side technologies. While personal values were also important, their associations were mediated by more specific factors. Overall, the adapted VBN model was better able to explain the acceptability of low-carbon behaviours than of low-carbon energy-supply technologies. Concern about energy security appeared to be of limited importance. It was negatively associated with the willingness to engage in low-carbon behaviours, suggesting that a shift in focus towards energy security issues may not necessarily help a transition to a low-carbon society. - Highlights: ► An adapted VBN model is proposed to study environmentally significant behaviour.► Environmental identity is important for both demand-side and supply-side measures.► Energy security concern is of limited importance to support for supply-side measures.► Energy security concern reduces the willingness to engage in low-carbon behaviours.

  7. Model Predictive Controller for Active Demand Side Management with PV Self-consumption in an Intelligent Building

    DEFF Research Database (Denmark)

    Zong, Yi; Mihet-Popa, Lucian; Kullmann, Daniel

    2012-01-01

    This paper presents a Model Predictive Controller (MPC) for electrical heaters’ predictive power consumption including maximizing the use of local generation (e.g. solar power) in an intelligent building. The MPC is based on dynamic power price and weather forecast, considering users’ comfort...... settings to meet an optimization objective such as minimum cost and minimum reference temperature error. It demonstrates that this MPC strategy can realize load shifting, and maximize the PV self-consumption in the residential sector. With this demand side control study, it is expected that MPC strategy...

  8. Demand-side management project for Tenaga Nasional Berhad. Progress report No. 3. Volume 2. Export trade information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-09-01

    The objective of this work is identify and encompass those utility demand-side management (DSM) activities that influence customer electricity use to produce customer savings while favorably modifying the utility load. These activities can help utilities operate more efficiently and effectively in uncertain and competitive business environments. This work authorization will initiate the following: Provide descriptive information on the operating characteristics, applicability, specifications, costs, and benefits of DSM/end-use technologies; Characterize the marketing methods used to encourage customer acceptance of these technologies.

  9. Impact on energy requirements and emissions of heat pumps and micro-cogenerators participating in demand side management

    International Nuclear Information System (INIS)

    Cooper, Samuel J.G.; Hammond, Geoffrey P.; McManus, Marcelle C.; Rogers, John G.

    2014-01-01

    The potential impacts of participating in demand side management (DSM) on the performance of air source heat pumps (ASHP) and micro-combined heat and power (mCHP) units are considered by this study. As significant consumers and generators of electricity at the distribution level, large numbers of heat pumps and micro-cogenerators would provide considerable scope for participation in DSM systems. However, it is possible that operating regimes which are optimised for grid considerations will not achieve the maximum performance that is possible from the units. Modelling has been conducted to investigate the significance of this effect, considering the case where local distribution constraints are the main driver for demand side interventions. A model of domestic electrical demand has been adapted to consider a neighbourhood of 128 dwellings in order to identify when interventions are necessary. This has been combined with dynamic models of two combustion engine micro-cogenerators, a solid oxide fuel cell micro-cogenerator and two ASHPs. A simple thermal model of each building is combined with a range of user preferences in order to determine the preferred operating profiles of the heating units. The DSM scheme analysed here is likely to have minimal impact on the emissions and energy requirements associated with each heating unit. Its effect is similar to that which occurs without DSM if the control system gain is relaxed such that equivalent thermal comfort is achieved. DSM can reduce the peak electrical demand of the neighbourhood. However, in the scenarios investigated, it is unlikely that the peaks can be reduced sufficiently such that they do not exceed the capacity of the local distribution transformer if ASHPs are used in all dwellings. By using a combination of mCHP units with ASHPs, it is possible to supply heating to all dwellings without exceeding this capacity. In this case, the use of DSM can increase the ratio of ASHPs used. In the context of a low

  10. Rapid response manufacturing (RRM). Final CRADA report

    Energy Technology Data Exchange (ETDEWEB)

    Cain, W.D. [Lockheed Martin Energy Systems, Inc., Oak Ridge, TN (United States); Waddell, W.L. [National Centers for Manufacturing Sciences, Ann Arbor, MI (United States)

    1998-02-10

    US industry is fighting to maintain its competitive edge in the global market place. Markets fluctuate rapidly. Companies have to be able to respond quickly with improved, high quality, cost efficient products. Because companies and their suppliers are geographically distributed, rapid product realization is dependent on the development of a secure integrated concurrent engineering environment operating across multiple business entities. The way products are developed and brought to market can be improved and made more efficient through the proper incorporation of emerging technologies implemented in a secure environment. This documents the work done under this CRADA to develop capabilities, which permit the effective application, incorporation, and use of advanced technologies in a secure environment to facilitate the product realization process. Lockheed Martin Energy Systems (LMES), through a CRADA with the National Center for Manufacturing Sciences (NCMS), worked within a consortium of major industrial firms--Ford, General Motors, Texas Instruments, United Technologies, and Eastman Kodak--and several small suppliers of advanced manufacturing technology--MacNeal-Schwendler Corp., Teknowledge Corp., Cimplex Corp., Concentra, Spatial Technology, and Structural Dynamics Research Corp. (SDRC)--to create infrastructure to support the development and implementation of secure engineering environments for Rapid Response Manufacturing. The major accomplishment achieved under this CRADA was the demonstration of a prototypical implementation of a broad-based generic framework for automating and integrating the design-to-manufacturing activities associated with machined parts in a secure NWC compliant environment. Specifically, methods needed to permit the effective application, incorporation, and use of advanced technologies in a secure environment to facilitate the product realization process were developed and demonstrated. An important aspect of this demonstration was

  11. A Multi-Objective Demand Side Management Considering ENS Cost in Smart Grids

    DEFF Research Database (Denmark)

    Yousefi Khanghah, Babak; Ghassemzadeh, Saeid; Hosseini, Seyed Hossein

    2017-01-01

    In this paper a new method is presented to achieve economic exploitation and proper usage of network capacity by exerting controlling actions over flexible loads and energy storage (ES) equipment. Multi-objective planning for demand response programs (DRP) and battery management policies is carried...... out by considering energy not supplied (ENS). In order to achieve an optimal scheduling, charge/discharge control for batteries, demand response programs and dispatch of controllable distributed generations (DGs) are also considered. Then, the balanced cost and benefits of participants are evaluated...

  12. Maximizing Energy Savings Reliability in BC Hydro Industrial Demand-side Management Programs: An Assessment of Performance Incentive Models

    Science.gov (United States)

    Gosman, Nathaniel

    For energy utilities faced with expanded jurisdictional energy efficiency requirements and pursuing demand-side management (DSM) incentive programs in the large industrial sector, performance incentive programs can be an effective means to maximize the reliability of planned energy savings. Performance incentive programs balance the objectives of high participation rates with persistent energy savings by: (1) providing financial incentives and resources to minimize constraints to investment in energy efficiency, and (2) requiring that incentive payments be dependent on measured energy savings over time. As BC Hydro increases its DSM initiatives to meet the Clean Energy Act objective to reduce at least 66 per cent of new electricity demand with DSM by 2020, the utility is faced with a higher level of DSM risk, or uncertainties that impact the costeffective acquisition of planned energy savings. For industrial DSM incentive programs, DSM risk can be broken down into project development and project performance risks. Development risk represents the project ramp-up phase and is the risk that planned energy savings do not materialize due to low customer response to program incentives. Performance risk represents the operational phase and is the risk that planned energy savings do not persist over the effective measure life. DSM project development and performance risks are, in turn, a result of industrial economic, technological and organizational conditions, or DSM risk factors. In the BC large industrial sector, and characteristic of large industrial sectors in general, these DSM risk factors include: (1) capital constraints to investment in energy efficiency, (2) commodity price volatility, (3) limited internal staffing resources to deploy towards energy efficiency, (4) variable load, process-based energy saving potential, and (5) a lack of organizational awareness of an operation's energy efficiency over time (energy performance). This research assessed the capacity

  13. Challenges of using model predictive control for active demand side management

    DEFF Research Database (Denmark)

    Zong, Yi; You, Shi; Hu, Junjie

    2015-01-01

    When there is a high penetration of renewables in the power system, it requires coordinated management of large numbers of distributed and demand response resources, intermittent resources to maintain the grid reliability and improve operational economics. This paper presents a hierarchical...... and dynamic power price signals....

  14. Enhancing Financial Capability and Inclusion in the Philippines : A Demand-Side Survey

    OpenAIRE

    World Bank Group

    2015-01-01

    In response to a request of the Bangko Sentral ng Pilipinas (BSP) and as part of a broader engagement on enhancing financial consumer protection and education in the Philippines, the World Bank has implemented a financial capability survey. Financial inclusion, financial literacy and consumer protection are important priorities for the BSP and the Philippines government. Consumer protectio...

  15. Aggregation of demand side flexibility in a smart grid: A review for European market design

    OpenAIRE

    Eid , Cherrelle; Codani , Paul; Chen , Yurong; Perez , Yannick; Hakvoort , Rudi

    2015-01-01

    International audience; The increased share of renewable generation and the integration of Distributed Generation (DG) require more electricity system flexibility. One way to increase this flexibility is to use the potentials of demand response (DR). In order to activate the full range of customers in DR, a new market intermediary actor is needed to aggregate the resources in an adequate technical and economical format. These actors, so called " aggregators " , can act as flexibility provider...

  16. Cost benefit analysis of the demand side management programs; Analise de custos e beneficios economicos de programas de gerencia pelo lado da demanda

    Energy Technology Data Exchange (ETDEWEB)

    Schechtman, R; Baum, M [PROMON Engenharia SA, Rio de Janeiro, RJ (Brazil)

    1990-12-31

    The several cost and benefit components of the demand side management programs for the society groups, including the concessionaire, consumers and society as a whole are studied. The rule evaluations of management programs by demand side, used by North American concessionaire are also discussed. Finally, the numerical examples, that consolidating the concepts and rules evaluation are presented. (C.G.C.). 5 refs, 1 fig, 3 tabs.

  17. DEVELOPMENT OF THE E-GOVERNMENT MARKET IN THE EUROPEAN UNION: AN ANALYSIS OF THE SUPPLY VERSUS DEMAND SIDES

    Directory of Open Access Journals (Sweden)

    Veghes Calin

    2011-07-01

    Full Text Available E-government represents one of the most palpable results of the dynamic development of the information and communication technology. Defined mostly as an intensive use of information technologies to provide public services, e-government has been approached in the literature rather from a technological perspective, with a significant importance given to the supply and a lower attention paid to the demand side. The increasing interest in taking into consideration the demand side in the development of the e-government initiatives and projects has created the foundation for a shift in the way the conceptual framework for e-government planning and implementation is defined, from the technology infrastructure and costs to the customer-centric character of all the efforts done. The European Union put e-government on its agenda aiming to improve access to the public information and services, increase transparency of public administration, exploit effectively the information technology within public administration, and establishing e-procurement. The development of the e-government services in the Member States, as it is expressed by the data regarding the supply and demand side, has been conducted in a more or less different manner that led, at the Unions level, to a relatively high availability but a rather low usage of the specific services. The paper explores the relationship between the e-government supply and demand based on the secondary data referring to the public services available to the citizens (as these are defined by the Eurostat methodology and the usage of these services by the individuals, integrating them through an analytical matrix inspired by the BCG model. Probably the most important conclusion of this analysis states that development of the e-government services has not been accompanied by measures meant to stimulate their usage in the most of the European Union Member States. The analytical matrix allowed also the identification

  18. A socio-technical investigation of the smart grid: Implications for demand-side activities of electricity service providers

    Science.gov (United States)

    Corbett, Jacqueline Marie

    Enabled by advanced communication and information technologies, the smart grid represents a major transformation for the electricity sector. Vast quantities of data and two-way communications abilities create the potential for a flexible, data-driven, multi-directional supply and consumption network well equipped to meet the challenges of the next century. For electricity service providers ("utilities"), the smart grid provides opportunities for improved business practices and new business models; however, a transformation of such magnitude is not without risks. Three related studies are conducted to explore the implications of the smart grid on utilities' demand-side activities. An initial conceptual framework, based on organizational information processing theory, suggests that utilities' performance depends on the fit between the information processing requirements and capacities associated with a given demand-side activity. Using secondary data and multiple regression analyses, the first study finds, consistent with OIPT, a positive relationship between utilities' advanced meter deployments and demand-side management performance. However, it also finds that meters with only data collection capacities are associated with lower performance, suggesting the presence of information waste causing operational inefficiencies. In the second study, interviews with industry participants provide partial support for the initial conceptual model, new insights are gained with respect to information processing fit and information waste, and "big data" is identified as a central theme of the smart grid. To derive richer theoretical insights, the third study employs a grounded theory approach examining the experience of one successful utility in detail. Based on interviews and documentary data, the paradox of dynamic stability emerges as an essential enabler of utilities' performance in the smart grid environment. Within this context, the frames of opportunity, control, and data

  19. Why commercial customers are SIC of DSM [demand-side management] marketing

    International Nuclear Information System (INIS)

    Lewis, L.E.

    1990-01-01

    Studies have shown that the success of demand management programs, which have demonstrated economic benefits, depends on the level of customer participation. In order to have a better understanding of the decisionmaking process of commercial customers with respect to demand management programs, a study was undertaken to determine the preferences and the behavior of this class of clientele. This clientele, whose power consumption has been increasing at a faster rate than that of other sectors, represents a vast range of enterprises producing and supplying all kinds of products. Many of them operate from numerous geographic points on local, regional, national, and even world scales and are generally hierarchically organized. Because of these characteristics, their decisionmaking processes and their needs are equally complex, more so than in the residential sector. A multidimensional approach has been adopted to ensure that their needs are determined according to a quantitative and qualitative research method. The conclusions of the quantitative research have demonstrated that the frameworks representing different organizations respond differently to questions on their needs. It is also noted that certain commercial enterprises are of a cohesive nature (i.e. there is a consistency in understanding of corporate strategic and operational requirements at all hierarchical levels), while others are more diffuse. Those responsible for marketing demand management programs therefore must improve their understanding of the strategic and operational needs of their commercial customers in order to make their demand management programs productive in the view of the appropriate personnel at the hierarchical level applicable to the company concerned

  20. Simulation of demand side participation in Spanish short term electricity markets

    International Nuclear Information System (INIS)

    Valencia-Salazar, I.; Alvarez, C.; Escriva-Escriva, G.; Alcazar-Ortega, M.

    2011-01-01

    Highlights: → Benefits from customer active participation can be obtained with a proper generation of bids and offers. → Simulation of Spanish customers' participation is shown in daily, intra-daily and balancing markets. → Market efficiency and economics profits arise in balancing markets by using customer load reductions. → Real market prices and real customers' consumptions profiles are used in the simulations. -- Abstract: Demand response resources management is one of the most investigated solutions oriented to improve the efficiency in electricity markets. In this paper, the capability of customers to participate in short term markets is analyzed. An available methodology to analyze the daily and monthly energy consumptions of large customers is used to create energy offers and bids. This allows customers to participate in energy markets in order to buy, as first step, the usual electricity consumption and, additionally, to offer demand reductions in the short term electricity markets. Additionally, this paper shows the customer potential to participate in the Spanish electricity markets.

  1. Lessons learned from new construction utility demand side management programs and their implications for implementing building energy codes

    Energy Technology Data Exchange (ETDEWEB)

    Wise, B.K.; Hughes, K.R.; Danko, S.L.; Gilbride, T.L.

    1994-07-01

    This report was prepared for the US Department of Energy (DOE) Office of Codes and Standards by the Pacific Northwest Laboratory (PNL) through its Building Energy Standards Program (BESP). The purpose of this task was to identify demand-side management (DSM) strategies for new construction that utilities have adopted or developed to promote energy-efficient design and construction. PNL conducted a survey of utilities and used the information gathered to extrapolate lessons learned and to identify evolving trends in utility new-construction DSM programs. The ultimate goal of the task is to identify opportunities where states might work collaboratively with utilities to promote the adoption, implementation, and enforcement of energy-efficient building energy codes.

  2. Electric Boiler and Heat Pump Thermo-Electrical Models for Demand Side Management Analysis in Low Voltage Grids

    DEFF Research Database (Denmark)

    Diaz de Cerio Mendaza, Iker; Bak-Jensen, Birgitte; Chen, Zhe

    2013-01-01

    The last fifteen years many European countries have integrated large percentage of renewable energy on their electricity generation mix. In Denmark the 21.3% of the electricity consumed nowadays is produced by the wind, and it has planned to be the 50% by 2025. In order to front future challenges...... on the power system control and operation, created by this unstable way of generation, Demand Side Management turns to be a promising solution. The storage capacity from thermo-electric units, like electric boilers and heat pumps, allows operating them with certain freedom. Hence they can be employed under...... certain coordination, to actively respond to the power system fluctuations. The following paper presents two simple thermo-electrical models of an electrical boiler and an air-source CO2 heat pump system. The purpose is using them in low voltage grids analysis to assess their capacity and flexibility...

  3. Distributed demand-side management optimisation for multi-residential users with energy production and storage strategies

    Directory of Open Access Journals (Sweden)

    Emmanuel Chifuel Manasseh

    2014-12-01

    Full Text Available This study considers load control in a multi-residential setup where energy scheduler (ES devices installed in smart meters are employed for demand-side management (DSM. Several residential end-users share the same energy source and each residential user has non-adjustable loads and adjustable loads. In addition, residential users may have storage devices and renewable energy sources such as wind turbines or solar as well as dispatchable generators. The ES devices exchange information automatically by executing an iterative distributed algorithm to locate the optimal energy schedule for each end-user. This will reduce the total energy cost and the peak-to-average ratio (PAR in energy demand in the electric power distribution. Users possessing storage devices and dispatchable generators strategically utilise their resources to minimise the total energy cost together with the PAR. Simulation results are provided to evaluate the performance of the proposed game theoretic-based distributed DSM technique.

  4. The Problems of Estonian R&D and Innovation Strategy and the Demand-Side Innovation Policies

    Directory of Open Access Journals (Sweden)

    Tõnu Roolaht

    2012-12-01

    Full Text Available The second larger Estonian R&D and Innovation Strategy ‘Knowledge-based Estonia 2007-2013’ is aimed at continuing the advancement of research and development efforts towards an innovative knowledge-based society and economic system in Estonia. Fostering of knowledge-based high-tech industries is seen as paramount for retaining country’s competitive advantage. However, the mid-term evaluations indicate that several goals of the strategy might not be achievable by 2013. In fact, the policy measures have been much more successful in developing scientific research, as indicated by increased international publication, number of patents, and number of researchers and engineers. The advances in development of high-tech products and services through innovations are noticeable but less prominent. The purpose of this study is to suggest the role for demand-side innovation policies in helping to advance commercial development and innovation

  5. Potential of Demand Side Management to Reduce Carbon Dioxide Emissions Associated with the Operation of Heat Pumps

    Directory of Open Access Journals (Sweden)

    Samuel J. G. Cooper

    2013-06-01

    Full Text Available This work considers the potential reduction in the carbon dioxide emissions associated with the operation of Air Source Heat Pump which could be achieved by using demand side management. In order to achieve significant reductions in carbon dioxide emissions, it is widely envisioned that electrification of the heating sector will need to be combined with decarbonisation of the electrical supply. By influencing the times at when electric heat pumps operate such that they coincide more with electricity generation which has a low marginal carbon emissions factor, it has been suggested that these emissions could be reduced further. In order to investigate this possibility, models of the UK electrical grid based on scenarios for 2020 to 2050 have been combined with a dynamic model of an air source heat pump unit and thermal models of a population of dwellings. The performance and carbon dioxide emissions associated with the heat pumps are compared both with and without demand side management interventions intended to give preference to operation when the marginal emissions factor of the electricity being generated is low. It is found that these interventions are unlikely to be effective at achieving further reductions in emissions. A reduction of around 3% was observed in scenarios based around 2035 but in other scenarios the reduction was insignificant. In the scenarios with high wind generation (2050, the DSM scheme considered here tends to improve thermal comfort (with minimal increases in emissions rather than achieving a decrease in emissions. The reasons for this are discussed and further recommendations are made.

  6. Rapid Response in Psychological Treatments for Binge-Eating Disorder

    Science.gov (United States)

    Hilbert, Anja; Hildebrandt, Thomas; Agras, W. Stewart; Wilfley, Denise E.; Wilson, G. Terence

    2015-01-01

    Objective Analysis of short- and long-term effects of rapid response across three different treatments for binge-eating disorder (BED). Method In a randomized clinical study comparing interpersonal psychotherapy (IPT), cognitive-behavioral guided self-help (CBTgsh), and behavioral weight loss (BWL) treatment in 205 adults meeting DSM-IV criteria for BED, the predictive value of rapid response, defined as ≥ 70% reduction in binge-eating by week four, was determined for remission from binge-eating and global eating disorder psychopathology at posttreatment, 6-, 12-, 18-, and 24-month follow-up. Results Rapid responders in CBTgsh, but not in IPT or BWL, showed significantly greater rates of remission from binge-eating than non-rapid responders, which was sustained over the long term. Rapid and non-rapid responders in IPT and rapid responders in CBTgsh showed a greater remission from binge-eating than non-rapid responders in CBTgsh and BWL. Rapid responders in CBTgsh showed greater remission from binge-eating than rapid responders in BWL. Although rapid responders in all treatments had lower global eating disorder psychopathology than non-rapid responders in the short term, rapid responders in CBTgsh and IPT were more improved than those in BWL and non-rapid responders in each treatment. Rapid responders in BWL did not differ from non-rapid responders in CBTgsh and IPT. Conclusions Rapid response is a treatment-specific positive prognostic indicator of sustained remission from binge-eating in CBTgsh. Regarding an evidence-based stepped care model, IPT, equally efficacious for rapid and non-rapid responders, could be investigated as a second-line treatment in case of non-rapid response to first-line CBTgsh. PMID:25867446

  7. Rapid response learning of brand logo priming: Evidence that brand priming is not dominated by rapid response learning.

    Science.gov (United States)

    Boehm, Stephan G; Smith, Ciaran; Muench, Niklas; Noble, Kirsty; Atherton, Catherine

    2017-08-31

    Repetition priming increases the accuracy and speed of responses to repeatedly processed stimuli. Repetition priming can result from two complementary sources: rapid response learning and facilitation within perceptual and conceptual networks. In conceptual classification tasks, rapid response learning dominates priming of object recognition, but it does not dominate priming of person recognition. This suggests that the relative engagement of network facilitation and rapid response learning depends on the stimulus domain. Here, we addressed the importance of the stimulus domain for rapid response learning by investigating priming in another domain, brands. In three experiments, participants performed conceptual decisions for brand logos. Strong priming was present, but it was not dominated by rapid response learning. These findings add further support to the importance of the stimulus domain for the relative importance of network facilitation and rapid response learning, and they indicate that brand priming is more similar to person recognition priming than object recognition priming, perhaps because priming of both brands and persons requires individuation.

  8. A future Demand Side Management (DSM) opportunity for utility as variable renewable penetrate scale up using agriculture.

    Science.gov (United States)

    Ines, A.; Bhattacharjee, A.; Modi, V.; Robertson, A. W.; Lall, U.; Kocaman Ayse, S.; Chaudhary, S.; Kumar, A.; Ganapathy, A.; Kumar, A.; Mishra, V.

    2015-12-01

    Energy demand management, also known as demand side management (DSM), is the modification of consumer demand for energy through various methods such as smart metering, incentive based schemes, payments for turning off loads or rescheduling loads. Usually, the goal of demand side management is to encourage the consumer to use less power during periods of peak demand, or to move the time of energy use to off-peak times. Peak demand management does not necessarily decrease total energy consumption, but could be expected to reduce the need for investments in networks and/or power plants for meeting peak demands. Electricity use can vary dramatically on short and medium time frames, and the pricing system may not reflect the instantaneous cost as additional higher-cost that are brought on-line. In addition, the capacity or willingness of electricity consumers to adjust to prices by altering elasticity of demand may be low, particularly over short time frames. In the scenario of Indian grid setup, the retail customers do not follow real-time pricing and it is difficult to incentivize the utility companies for continuing the peak demand supply. A question for the future is how deeper penetration of renewable will be handled? This is a challenging problem since one has to deal with high variability, while managing loss of load probabilities. In the case of managing the peak demand using agriculture, in the future as smart metering matures with automatic turn on/off for a pump, it will become possible to provide an ensured amount of water or energy to the farmer while keeping the grid energized for 24 hours. Supply scenarios will include the possibility of much larger penetration of solar and wind into the grid. While, in absolute terms these sources are small contributors, their role will inevitably grow but DSM using agriculture could help reduce the capital cost. The other option is of advancing or delaying pump operating cycle even by several hours, will still ensure

  9. Feasibility and potential of thermal demand side management in residential buildings considering different developments in the German energy market

    International Nuclear Information System (INIS)

    Wolisz, Henryk; Punkenburg, Carl; Streblow, Rita; Müller, Dirk

    2016-01-01

    Highlights: • A scenario analysis for the German energy market in the year 2030 is performed. • Growing demand for flexible electric capacities is identified in all scenarios. • Significant potential for domestic demand side management is identified. • A distinct potential for dynamic operation of domestic supply systems is found. • The necessity for a quick introduction of smart metering and control is found. - Abstract: A transition in the electricity market is required to manage the volatility of increasing renewable energy generation. These fluctuations can be faced with flexible consumption through Demand Side Management (DSM), establishment of further centralized storage capacities and provisioning of dynamic back up generation capacities. At least the latter two options can impose large establishment and operation costs upon the electricity market. Therefore, the feasibility and the resulting potential of coupling the electricity grid with the thermal supply of residential buildings is analysed in this paper. Thereby, inexpensive and widespread thermal storage capacities could be used to improve the integration of dynamic renewable electricity generation. In this paper the technical and economical key impact factors for such thermal DSM approach are elaborated. Based on a literature review, the identified key factors are aggregated to form consistent scenarios of the German “Energiewende” (turnaround in energy policy). The practicability and possible magnitude of the intended DSM is then analysed based on the identified scenarios. All resulting scenarios highlight the growing demand for a flexible electricity market. Especially in scenarios with strong growth of renewable electricity generation, up to 45 GW of flexible electric capacities would be required in Germany by the year 2030. Furthermore, the analysis demonstrates that independently of the energy market development, it is very likely that electricity coupled supply systems will

  10. The demand-side innovation policies in the context of small EU member country. Nõudluspoolsed innovatsioonipoliitikad Euroopa Liidu väikese liikmesriigi kontekstis

    Directory of Open Access Journals (Sweden)

    Tõnu Roolaht

    2013-01-01

    Full Text Available Demand-side innovation policies, in the form of regulations, public procurement, subsidies for private demand, and other measures, are often viewed as valuable additions to more traditional supply-side policies. The demand-side innovation policies should enable to facilitate the emergence of vital and sustainable links between innovation outputs and various markets. However, without sufficient institutional framework and policy experiences such measures could also contribute to new market distortions or crowding-out effects, which do not facilitate sustainable growth in innovations. The charting of possible risks of such policies should help to outline the criteria for aiming at sustainable effects. The purpose of this contribution is to offer suggestions about preconditions and policy characteristics, which should help to avoid the misuse of demand-side measures and facilitate the sustainability of desired changes in society. It is predominantly conceptual contribution but draws also extensively on case evidence about the effects of relevant policies and their discontinuation

  11. The demand-side innovation policies and sustainable development in the small EU country. Nõudluspoolsed innovatsioonipoliitikad ja jätkusuutlik areng Euroopa Liidu väikeriigis

    Directory of Open Access Journals (Sweden)

    Tõnu Roolaht

    2012-01-01

    Full Text Available Various regulations, standards, public procurement activities, subsidies for private demand, and other similar support measures form the demand-side innovation policies. In the modern era, countries and governments dedicate more and more attention to the economic, social, and environmental sustainability of development and entrepreneurship. Sustainable development aims to meet human needs so that economic and social conditions will improve or at least not deteriorate and environment is preserved in order to allow future generations to meet their needs as well. Several demand-side innovation policy measures target also sustainability either as primary or secondary goal. Such policy measures tend to suffer from overshooting effects or fail to influence the behaviour in a desired manner. The purpose of this study is to offer suggestions concerning demand-side policy measures in order to improve their impact on the sustainability of development

  12. A sustainable development of a city electrical grid via a non-contractual Demand-Side Management

    Science.gov (United States)

    Samoylenko, Vladislav O.; Pazderin, Andrew V.

    2017-06-01

    An increasing energy consumption of large cities as well as an extreme high density of city electrical loads leads to the necessity to search for an alternative approaches to city grid development. The ongoing implementation of the energy accounting tariffs with differentiated rates depending upon the market conditions and changing in a short-term perspective, provide the possibility to use it as a financial incentive base of a Demand-Side Management (DSM). Modern hi-technology energy metering and accounting systems with a large number of functions and consumer feedback are supposed to be the good means of DSM. Existing systems of Smart Metering (SM) billing usually provide general information about consumption curve, bills and compared data, but not the advanced statistics about the correspondence of financial and electric parameters. Also, consumer feedback is usually not fully used. So, the efforts to combine the market principle, Smart Metering and a consumer feedback for an active non-contractual load control are essential. The paper presents the rating-based multi-purpose system of mathematical statistics and algorithms of DSM efficiency estimation useful for both the consumers and the energy companies. The estimation is performed by SM Data processing systems. The system is aimed for load peak shaving and load curve smoothing. It is focused primarily on a retail market support. The system contributes to the energy efficiency and a distribution process improvement by the manual management or by the automated Smart Appliances interaction.

  13. How to optimize tourism destination supply: A case in Shanghai from perspective of supplier and demand side perception

    Science.gov (United States)

    Xue, Huaju; Fang, Chengjiang

    2018-02-01

    It is vital to assess the regional tourist supply capability by suppliers and demand groups. The supply side’s evaluation of the regional supply capacity determines the direction of the supply investment in future, the demand side’s evaluation indicates their satisfaction degree of the destination supply and also effects their revisit the tourism destination. Therefore, the assessment of the supply and demand sides is an important reference for the reform of destination supply side, which helps us find the shortage of the destination supply factors and optimize tourism destination supply promptly. This paper through investigating tourism supply and demand groups in Shanghai, used the survey data and constructed tourism supply optimization model, analyzed the current situation of tourism supply factors in Shanghai. Results showed that the environment of Shanghai should be improved first, including improving urban air and water quality, up-grading public sanitation and increasing urban green coverage. Other supply factors improved priority were information and marketing, we should improve the information consultation of scenic spots, increase the intensity of tourism promotion and provide more free travel publicity brochures.

  14. Metering systems and demand-side management models applied to hybrid renewable energy systems in micro-grid configuration

    International Nuclear Information System (INIS)

    Blasques, L.C.M.; Pinho, J.T.

    2012-01-01

    This paper proposes a demand-side management model integrated to a metering system for hybrid renewable energy systems in micro-grid configuration. The proposal is based on the management problems verified in most of this kind of renewable hybrid systems installed in Brazil. The main idea is the implementation of a pre-paid metering system with some control functions that directly act on the consumer demand, restricting the consumption proportionally to the monthly availability of renewable energy. The result is a better distribution of the electricity consumption by month and by consumer, preventing that only one user, with larger purchasing power, consumes all the renewable energy available at some time period. The proportionality between the consumption and the renewable energy's availability has the objective to prevent a lack of energy stored and a high use of the diesel generator-set on months of low renewable potential. This paper also aims to contribute to the Brazilian regulation of renewable energy systems supplying micro-grids. - Highlights: ► Review of the Brazilian electricity regulation for small-scale isolated systems. ► Renewable systems are the most feasible option in several isolated communities. ► One proposal is to guarantee government subsidies for renewable energy systems. ► Smart electronic meters to create electricity restrictions for the consumers.

  15. Simulation of the Demand Side Management impacts: resolution enhancement of the input parameters at the local scale

    International Nuclear Information System (INIS)

    Imbert, P.

    2011-01-01

    Following the integrated energy planning paradigm in the 90's and the recent renewal of decentralized energy planning interests, Demand Side Management (DSM) actions are expected to take a significant role on energy planning activities in the future. Indeed the DSM actions represent a relevant option to achieve environmental and energy commitments or to alleviate some specific problems of electricity supply. DSM actions at the local scale at least in the French context is observed today. There is a need for appropriate methods and tools to assess the impacts of such MDE programs at local level. The local scale involves taking into account the specificities of the territories (physical, social, geographical, economical, institutional, etc.) The objective of this thesis is to improve the spatial resolution of input variables for the use in DSM action simulation tools. Based on a case study in France (PREMIO project: smart architecture for load management applied to a district) and an existing simulation tool we will study the impacts of this local experience to several municipalities. (author)

  16. An Algorithmic Game Approach for Demand Side Management in Smart Grid with Distributed Renewable Power Generation and Storage

    Directory of Open Access Journals (Sweden)

    Ren-Shiou Liu

    2016-08-01

    Full Text Available In this paper, the problem of minimizing electricity cost and the peak system load in smart grids with distributed renewable energy resources is studied. Unlike prior research works that either assume all of the jobs are interruptible or power-shiftable, this paper focuses on more challenging scenarios in which jobs are non-interruptible and non-power-shiftable. In addition, as more and more newly-built homes have rooftop solar arrays, it is assumed that all users are equipped with a solar-plus-battery system in this paper. Thus, power can be drawn from the battery as needed to reduce the cost of electricity or to lower the overall system load. With a quadratic load-dependent cost function, this paper first shows that the electricity cost minimization problem in such a setting is NP-hard and presents a distributed demand-side management algorithm, called DDSM, to solve this. Experimental results show that the proposed DDSM algorithm is effective, scalable and converges to a Nash equilibrium in finite rounds.

  17. A demand-side approach to the optimal deployment of electric vehicle charging stations in metropolitan areas

    International Nuclear Information System (INIS)

    Andrenacci, N.; Ragona, R.; Valenti, G.

    2016-01-01

    Highlights: • A demand-side approach to the location of charging infrastructure problem is discussed in the paper. • The analysis is based on a large data-set of private vehicle travels within the urban area of Rome. • Cluster analysis is applied to the data to find the optimal location zones for charging infrastructures. • The daily energy demand and the average number of users per day are calculated for each and every charging infrastructure. - Abstract: Despite all the acknowledged advantages in terms of environmental impact reduction, energy efficiency and noise reduction, the electric mobility market is below expectations. In fact, electric vehicles have limitations that pose several important challenges for achieving a sustainable mobility system: among them, the availability of an adequate charging infrastructure is recognized as a fundamental requirement and appropriate approaches to optimize public and private investments in this field are to be delineated. In this paper we consider actual data on conventional private vehicle usage in the urban area of Rome to carry out a strategy for the optimal allocation of charging infrastructures into portions (subareas) of the urban area, based on an analysis of a driver sample under the assumption of a complete switch to an equivalent fleet of electric vehicles. Moreover, the energy requirement for each one of the subareas is estimated in terms of the electric energy used by the equivalent fleet of electric vehicles to reach their destination. The model can be easily generalized to other problems regarding facility allocation based on user demand.

  18. A Novel Prosumer-Based Energy Sharing and Management (PESM Approach for Cooperative Demand Side Management (DSM in Smart Grid

    Directory of Open Access Journals (Sweden)

    Sohail Razzaq

    2016-10-01

    Full Text Available Increasing population and modern lifestyle have raised energy demands globally. Demand Side Management (DSM is one important tool used to manage energy demands. It employs an advanced power infrastructure along with bi-directional information flow among utilities and users in order to achieve a balanced load curve and minimize demand-supply mismatch. Traditionally, this involves shifting the electricity demand from peak hours to other times of the day in an optimized manner. Multiple users equipped with renewable resources work in coordination with each other in order to achieve mutually beneficial energy management. This, in turn, has generated the concept of cooperative DSM. Such users, called prosumers, consume and produce energy using renewable resources (solar, wind etc.. Prosumers with surplus energy sell to the grid as well as to other consumers. In this paper, a novel Prosumer-based Energy Sharing and Management (PESM scheme for cooperative DSM has been proposed. A simulation model has been developed for testing the proposed method. Different variations of the proposed methodology have been experimented with different criteria. The results show that the proposed energy sharing scheme achieves DSM purposes in a useful manner.

  19. Impact of Demand-Side Management on Thermal Comfort and Energy Costs in a Residential nZEB

    Directory of Open Access Journals (Sweden)

    Thibault Q. Péan

    2017-05-01

    Full Text Available In this study, simulation work has been carried out to investigate the impact of a demand-side management control strategy in a residential nZEB. A refurbished apartment within a multi-family dwelling representative of Mediterranean building habits was chosen as a study case and modelled within a simulation framework. A flexibility strategy based on set-point modulation depending on the energy price was applied to the building. The impact of the control strategy on thermal comfort was studied in detail with several methods retrieved from the standards or other literature, differentiating the effects on day and night living zones. It revealed a slight decrease of comfort when implementing flexibility, although this was not prejudicial. In addition, the applied strategy caused a simultaneous increase of the electricity used for heating by up to 7% and a reduction of the corresponding energy costs by up to around 20%. The proposed control thereby constitutes a promising solution for shifting heating loads towards periods of lower prices and is able to provide benefits for both the user and the grid sides. Beyond that, the activation of energy flexibility in buildings (nZEB in the present case will participate in a more successful integration of renewable energy sources (RES in the energy mix.

  20. Economic and environmental impacts from the implementation of an intelligent demand side management system at the European level

    International Nuclear Information System (INIS)

    Papagiannis, G.; Dagoumas, A.; Lettas, N.; Dokopoulos, P.

    2008-01-01

    This paper presents the results of an analysis on the economic and environmental impacts of the application of an intelligent demand side management system, called the Energy Consumption Management System (ECMS), in the European countries. The ECMS can be applied for the control of individual, widely distributed electric loads, using the power distribution network as the command communication channel. The system can be applied in public lighting, in the tertiary and residential sectors, as well as in the industry. A top-down analysis investigates the possible penetration levels in each application area. The long-term impacts following the application of system are evaluated using the LEAP2006 platform. The WASP IV model is also used for the optimization of the power generation expansion and the corresponding calibration of LEAP2006. Several operational strategies combining variable market penetration of the ECMS and expected energy savings are examined. Results show that, under a logical market penetration, a reduction of 1-4% in primary energy, of 1.5-5% in CO 2 emissions and a 2-8% saving in investment costs for power generation expansion is to be expected for the EU-15. The results also justify that innovative devices may be attractive to end users and also help in the implementation of global energy-saving policies

  1. A semi-distributed electric demand-side management system with PV generation for self-consumption enhancement

    International Nuclear Information System (INIS)

    Castillo-Cagigal, M.; Gutierrez, A.; Monasterio-Huelin, F.; Caamano-Martin, E.; Masa, D.; Jimenez-Leube, J.

    2011-01-01

    Highlights: → We have developed a DSM system with PV electricity and battery storage. → To implement the DSM system, we have developed a modular architecture. → Simulations and real experiments have been executed for different weather conditions. → The use of theses technologies increase the self-consumed energy. -- Abstract: This paper presents the operation of an Electrical Demand-Side Management (EDSM) system in a real solar house. The use of EDSM is one of the most important action lines to improve the grid electrical efficiency. The combination between the EDSM and the PV generation performs a new control level in the local electric behavior and allows new energy possibilities. The solar house used as test-bed for the EDSM system owns a PV generator, a lead-acid battery storage system and a grid connection. The electrical appliances are controllable from an embedded computer. The EDSM is implemented by a control system which schedules the tasks commanded by the user. By using the control system, we define the house energy policy and improve the energy behavior with regard to a selected energy criterion, self-consumption. The EDSM system favors self-consumption with regard to a standard user behavior and reduces the energy load from the grid.

  2. Evaluation of Orange and Rockland Utilities, Inc.`s competitive bidding program for demand-side resources. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Peters, J.S.; Stucky, L.; Seratt, P.; Darden-Butler, D. [Barakat and Chamberlin, Inc., Portland, OR (United States)

    1993-02-01

    The process evaluation reports on the implementation of Orange and Rockland Utilities demand-side bidding program in New York State during 1991 and 1992. The program is implemented by two energy service companies in Orange and rockland`s New York State service territory. The process evaluation methodology included interviews with utility staff (3), energy service company staff (2), and participating (6) and nonparticipating (7) utility customers. The two energy service companies had enrolled 14 customers in the program by summer 1992. One company had achieved 90% of their 2.75 MW bid and the other had achieved less than 90% of their 6.9 MW bid. Critical factors in success were determination of a reasonable bid amount for the market and marketing to the appropriate customers. Customers most interested in the program included those with limited access to capital and medium-sized firms with poor cash flows, particularly schools and hospitals. The findings also show that due to the incentive structure and associated need for substantial customer contributions, lighting measures dominate all installations. Customers, however, were interested in the potential savings and six of the nonparticipants chose to either install measures on their own or enroll in the utility`s rebate program.

  3. Demand-side management project for Tenaga Nasional Berhad. Energy efficiency guidelines. Progress report No. 3. Volume 1. Final report. Export trade information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1993-05-01

    This study, conducted by the California Energy Commission, was funded by the U.S. Trade and Development Agency. The report summarizes a demand-side management study performed for the Tenaga Nasional Berhad Headquarters Building. The purpose of the study was to identify and evaluate demand side management measures (DSMs) that would reduce energy costs of the facility. Volume 1 is divided into the following sections: (1.0) Executive Summary; (2.0) Facility Background; (3.0) Ventilating and Air Conditioning Systems Description; (4.0) Lightning System Description; Figures, Tables, and Appendices.

  4. Methodology for the analysis and characterization of the demand side energy resources; Metodologia para analise e caracterizacao dos recursos energeticos do lado da demanda

    Energy Technology Data Exchange (ETDEWEB)

    Baitelo, Ricardo Lacerda; Udaeta, Miguel Edgar Morales [Universidade de Sao Paulo (USP), SP (Brazil). Dept. de Energia e Automacao Eletricas. Grupo de Energia; Burani, Geraldo Francisco; Grimoni, Jose Aquiles Baesso [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Energia e Eletrotecnica

    2006-07-01

    This abstract aims at describing briefly a model for the assessment of demand side energy resources This model intends to comprehend every kind of action and measure related to demand side management and energy conservation, evaluating them in a holistic way, into four dimensions: technical-economical, environmental, social and political. Different aspects regarding the resources are also accounted, such as energetic potentials (theoretical, accomplishable and economic). At last, scenarios concerning the introduction of evaluated resources through a period of time are elaborated. (author)

  5. Correlates of rapid neuroleptic response in male patients with schizophrenia.

    Science.gov (United States)

    Petrie, E C; Faustman, W O; Moses, J A; Lombrozo, L; Csernansky, J G

    1990-08-01

    Correlates of neuroleptic response latency were assessed in 16 male schizophrenic inpatients during 4 weeks of fixed dose (20 mg/day) haloperidol treatment. Rapid responders showed a mean 40% reduction in Brief Psychiatric Rating Scale (BPRS) positive symptom scores by day 10 of treatment. Rapid responders had significantly lower plasma homovanillic acid (pHVA) concentrations compared to non-rapid responders during week 4 of haloperidol treatment. However, rapid versus non-rapid responders did not differ with respect to demographics, baseline positive or negative BPRS symptom scores, performance on tests of neuropsychological function, or mean plasma haloperidol concentrations.

  6. An evaluation of two large scale demand side financing programs for maternal health in India: the MATIND study protocol

    Directory of Open Access Journals (Sweden)

    Sidney Kristi

    2012-08-01

    Full Text Available Abstract Background High maternal mortality in India is a serious public health challenge. Demand side financing interventions have emerged as a strategy to promote access to emergency obstetric care. Two such state run programs, Janani Suraksha Yojana (JSYand Chiranjeevi Yojana (CY, were designed and implemented to reduce financial access barriers that preclude women from obtaining emergency obstetric care. JSY, a conditional cash transfer, awards money directly to a woman who delivers in a public health facility. This will be studied in Madhya Pradesh province. CY, a voucher based program, empanels private obstetricians in Gujarat province, who are reimbursed by the government to perform deliveries of socioeconomically disadvantaged women. The programs have been in operation for the last seven years. Methods/designs The study outlined in this protocol will assess and compare the influence of the two programs on various aspects of maternal health care including trends in program uptake, institutional delivery rates, maternal and neonatal outcomes, quality of care, experiences of service providers and users, and cost effectiveness. The study will collect primary data using a combination of qualitative and quantitative methods, including facility level questionnaires, observations, a population based survey, in-depth interviews, and focus group discussions. Primary data will be collected in three districts of each province. The research will take place at three levels: the state health departments, obstetric facilities in the districts and among recently delivered mothers in the community. Discussion The protocol is a comprehensive assessment of the performance and impact of the programs and an economic analysis. It will fill existing evidence gaps in the scientific literature including access and quality to services, utilization, coverage and impact. The implementation of the protocol will also generate evidence to facilitate decision making

  7. Demand side management in South Africa at industrial residence water heating systems using in line water heating methodology

    International Nuclear Information System (INIS)

    Rankin, R.; Rousseau, P.G.

    2008-01-01

    The South African electrical utility, ESKOM, currently focuses its demand side management (DSM) initiatives on controlling electrical load between 18:00 and 20:00 each day, which is the utility's peak demand period. Funding is provided to energy service companies (ESCo's) to implement projects that can achieve load shifting out of this period. This paper describes how an improved in line water heating concept developed in previous studies was implemented into several real life industrial sanitary water heating systems to obtain the DSM load shift required by ESKOM. Measurements from a selection of these plants are provided to illustrate the significant load reductions that are being achieved during 18:00-20:00. The measured results also show that the peak load reduction is achieved without adversely affecting the availability of sufficient hot water to the persons using the showering and washing facilities served by the water heating system. A very good correlation also exists between these measured results and simulations that were done beforehand to predict the DSM potential of the project. The in line water heater concept provides an improved solution for DSM at sanitary water heating systems due to the stratified manner in which hot water is supplied to the tanks. This provides an improved hot water supply to users when compared to conventional in tank heating systems, even with load shifting being done. It also improves the storage efficiency of a plant, thereby allowing the available storage capacity of a plant to be utilized to its full extent for load shifting purposes

  8. Novel effects of demand side management data on accuracy of electrical energy consumption modeling and long-term forecasting

    International Nuclear Information System (INIS)

    Ardakani, F.J.; Ardehali, M.M.

    2014-01-01

    Highlights: • Novel effects of DSM data on electricity consumption forecasting is examined. • Optimal ANN models based on IPSO and SFL algorithms are developed. • Addition of DSM data to socio-economic indicators data reduces MAPE by 36%. - Abstract: Worldwide implementation of demand side management (DSM) programs has had positive impacts on electrical energy consumption (EEC) and the examination of their effects on long-term forecasting is warranted. The objective of this study is to investigate the effects of historical DSM data on accuracy of EEC modeling and long-term forecasting. To achieve the objective, optimal artificial neural network (ANN) models based on improved particle swarm optimization (IPSO) and shuffled frog-leaping (SFL) algorithms are developed for EEC forecasting. For long-term EEC modeling and forecasting for the U.S. for 2010–2030, two historical data types used in conjunction with developed models include (i) EEC and (ii) socio-economic indicators, namely, gross domestic product, energy imports, energy exports, and population for 1967–2009 period. Simulation results from IPSO-ANN and SFL-ANN models show that using socio-economic indicators as input data achieves lower mean absolute percentage error (MAPE) for long-term EEC forecasting, as compared with EEC data. Based on IPSO-ANN, it is found that, for the U.S. EEC long-term forecasting, the addition of DSM data to socio-economic indicators data reduces MAPE by 36% and results in the estimated difference of 3592.8 MBOE (5849.9 TW h) in EEC for 2010–2030

  9. Consumer-led demand side financing in health and education and its relevance for low and middle income countries.

    Science.gov (United States)

    Ensor, Tim

    2004-01-01

    There is increasing awareness that supply subsidies for health and education services often fail to benefit those that are most vulnerable in a community. This recognition has led to a growing interest in and experimentation with, consumer-led demand side financing systems (CL-DSF). These mechanisms place purchasing power in the hands of consumers to spend on specific services at accredited facilities. International evidence in education and health sectors suggest a limited success of CL-DSF in raising the consumption of key services amongst priority groups. There is also some evidence that vouchers can be used to improve targeting of vulnerable groups. There is very little positive evidence on the effect of CL-DSF on service quality as a consequence of greater competition. Location of services relative to population means that areas with more provider choice, particularly in the private sector, tend to be dominated by higher and middle-income households. Extending CL-DSF in low-income countries requires the development of capacity in administering these financing schemes and also accrediting providers. Schemes could focus primarily on fixed packages of key services aimed at easily identifiable groups. Piloting and robust evaluation is required to fill the evidence gap on the impact of these mechanisms. Extending demand financing to less predictable services, such as hospital coverage for the population, is likely to require the development of a voucher scheme to purchase insurance. This suggests an already developed insurance market and is unlikely to be appropriate in most low-income countries for some time.

  10. An evaluation of two large scale demand side financing programs for maternal health in India: the MATIND study protocol.

    Science.gov (United States)

    Sidney, Kristi; de Costa, Ayesha; Diwan, Vishal; Mavalankar, Dileep V; Smith, Helen

    2012-08-27

    High maternal mortality in India is a serious public health challenge. Demand side financing interventions have emerged as a strategy to promote access to emergency obstetric care. Two such state run programs, Janani Suraksha Yojana (JSY)and Chiranjeevi Yojana (CY), were designed and implemented to reduce financial access barriers that preclude women from obtaining emergency obstetric care. JSY, a conditional cash transfer, awards money directly to a woman who delivers in a public health facility. This will be studied in Madhya Pradesh province. CY, a voucher based program, empanels private obstetricians in Gujarat province, who are reimbursed by the government to perform deliveries of socioeconomically disadvantaged women. The programs have been in operation for the last seven years. The study outlined in this protocol will assess and compare the influence of the two programs on various aspects of maternal health care including trends in program uptake, institutional delivery rates, maternal and neonatal outcomes, quality of care, experiences of service providers and users, and cost effectiveness. The study will collect primary data using a combination of qualitative and quantitative methods, including facility level questionnaires, observations, a population based survey, in-depth interviews, and focus group discussions. Primary data will be collected in three districts of each province. The research will take place at three levels: the state health departments, obstetric facilities in the districts and among recently delivered mothers in the community. The protocol is a comprehensive assessment of the performance and impact of the programs and an economic analysis. It will fill existing evidence gaps in the scientific literature including access and quality to services, utilization, coverage and impact. The implementation of the protocol will also generate evidence to facilitate decision making among policy makers and program managers who currently work with or

  11. Dynamics of energy-related CO2 emissions in China during 1980-2002: the relative importance of energy supply-side and demand-side effects

    International Nuclear Information System (INIS)

    Libo Wu; Kaneko, Shinji; Matsuoka, Shunji

    2006-01-01

    Based on a newly developed model that integrates energy production, transformation and consumption processes, this paper compares the relative importance of some traditionally recognized factors operating on the energy demand side with a body of newly defined factors on the supply side, in terms of their contribution to trends in China's CO 2 emissions related to the total primary energy supply (C-TPES). Before 1996, changes in China's C-TPES were mainly driven by changes on the energy demand side. Factors operating on the energy supply side played trivial roles. During the period 1996-2000, however, increasing demand-side effects declined dramatically and at the same time decreasing effects from supply side expanded significantly. Such changes resulted directly in a decline in the C-TPES. The decreasing effects from international trade as well as statistical imbalances between supply and demand reinforced the declining trend. The shrinkage of demand side effects mainly arose from the slowdown of economic growth and speed of decrease in energy intensity. The expansion of supply-side effects was principally attributed to the speed of decrease in gross unit consumption in transformation sectors, especially in electricity sector. Therefore, the acceleration of efficiency improvements in end-use and transformation sectors accounted for the decline in the C-TPES over the period 1996-2000. (author)

  12. DEMONSTRATION OF THE ENVIRONMENTAL AND DEMAND-SIDE MANAGEMENT BENEFITS OF GRID-CONNECTED PHOTOVOLTAIC POWER SYSTEMS SITED ON MILITARY BASES

    Science.gov (United States)

    The report gives results of an investigation into the pollutant emission reduction and demand-side management potential of three photovoltaic (PV) systems installed at Ft. Huachuca, AZ, Ft. Dix, NJ, and Hickam Air Force Base, HI, which began operation between January and July 199...

  13. Demand-Side Financing--A Focus on Vouchers in Post-Compulsory Education and Training: Discussion Paper and Case Studies. CEDEFOP Dossier.

    Science.gov (United States)

    West, Anne; Sparkes, Jo; Balabanov, Todor

    The use of demand-side financing mechanisms and vouchers for postcompulsory secondary-level education was examined through case studies of funding practices in the following countries: Austria; France; the United Kingdom; the United States; and Wallonia (the French community of Belgium). Different models of voucher use were identified in the…

  14. Rapid response in psychological treatments for binge eating disorder.

    Science.gov (United States)

    Hilbert, Anja; Hildebrandt, Thomas; Agras, W Stewart; Wilfley, Denise E; Wilson, G Terence

    2015-06-01

    Analysis of short- and long-term effects of rapid response across 3 different treatments for binge eating disorder (BED). In a randomized clinical study comparing interpersonal psychotherapy (IPT), cognitive-behavioral therapy guided self-help (CBTgsh), and behavioral weight loss (BWL) treatment in 205 adults meeting Diagnostic and Statistical Manual of Mental Disorders (4th ed.; DSM-IV; APA, 1994) criteria for BED, the predictive value of rapid response, defined as ≥70% reduction in binge eating by Week 4, was determined for remission from binge eating and global eating disorder psychopathology at posttreatment, 6-, 12-, 18-, and 24-month follow-ups. Rapid responders in CBTgsh, but not in IPT or BWL, showed significantly greater rates of remission from binge eating than nonrapid responders, which was sustained over the long term. Rapid and nonrapid responders in IPT and rapid responders in CBTgsh showed a greater remission from binge eating than nonrapid responders in CBTgsh and BWL. Rapid responders in CBTgsh showed greater remission from binge eating than rapid responders in BWL. Although rapid responders in all treatments had lower global eating disorder psychopathology than nonrapid responders in the short term, rapid responders in CBTgsh and IPT were more improved than those in BWL and nonrapid responders in each treatment. Rapid responders in BWL did not differ from nonrapid responders in CBTgsh and IPT. Rapid response is a treatment-specific positive prognostic indicator of sustained remission from binge eating in CBTgsh. Regarding an evidence-based, stepped-care model, IPT, equally efficacious for rapid and nonrapid responders, could be investigated as a second-line treatment in case of nonrapid response to first-line CBTgsh. (c) 2015 APA, all rights reserved).

  15. Oh and by the way, you get meter readings too : a look at distribution automation, intelligent grids, and demand side management : getting the real value from your AMI

    Energy Technology Data Exchange (ETDEWEB)

    Summerlin, T. [Gestalt, Camden, NJ (United States); Ferguson, P.D. [Newmarket Hydro Ltd., Newmarket, ON (Canada)

    2006-07-01

    The full value of smart metering programs will be realized when information and communication capabilities are used to enable distribution automation, intelligent grids, and sufficient data management that will transform interval meter data into useful information. By leveraging and managing meter data effectively, utilities can increase their operational efficiency, improve their understanding of customers' needs, and develop more effective demand side management programs. This presentation examined some of the changing priorities of advanced metering infrastructure (AMI) strategies, and provided details of meter data management (MDM) technologies developed to help utilities increase efficiency, cut costs and provide better service to their customers. An MDM system is the set of data bases and applications required to provide utilities with a solution for the data retention, analysis and storage repository gaps that will be created when monthly manual meter readings are replaced with AMI systems. In order to resolve storage, functionality and legacy integration gaps, MDM systems must be scalable systems that can support large and small quantities of meter data, and must also conform to industry standard data warehouse designs. Data structure in the systems must support both regulated and deregulated markets, and be capable of providing extensive graphical, tabular and Excel export of the metered and totalized data from the interval to system level. MDM systems can provide improved support for demand response decision-making processes; distribution planning and reliability; outage management; revenue assurance; forecasting; and curtailment. It was concluded that MDM systems can be used to improve processes and provide additional benefits well beyond the meter reading and billing process benefits originally identified by utilities as a primary goal of implementing AMI. refs., tabs., figs.

  16. Lessons learned from Rapid Response Research on wildland fires

    Science.gov (United States)

    Leigh Lentile; Penny Morgan; Colin Hardy; Andrew Hudak; Robert Means; Roger Ottmar; Peter Robichaud; Elaine Sutherland; Frederick Way; Sarah Lewis

    2007-01-01

    In recent years, more researchers are collecting data either on active wildfires or immediately after wildfire occurrence. Known as Rapid Response Research, this important undertaking provides real-time information, useful data, and improved tools for managers.

  17. Adsorption of Chloroform by the Rapid Response System Filter

    National Research Council Canada - National Science Library

    Karwacki, Christopher

    1997-01-01

    Adsorption equilibria and dynamic breakthrough data were measured to determine the adsorption capacity and effect of purge air on the desorption of chloroform from activated carbon simulating the Rapid Response System (RRS) filter...

  18. Reduction in Mortality Following Pediatric Rapid Response Team Implementation.

    Science.gov (United States)

    Kolovos, Nikoleta S; Gill, Jeff; Michelson, Peter H; Doctor, Allan; Hartman, Mary E

    2018-05-01

    To evaluate the effectiveness of a physician-led rapid response team program on morbidity and mortality following unplanned admission to the PICU. Before-after study. Single-center quaternary-referral PICU. All unplanned PICU admissions from the ward from 2005 to 2011. The dataset was divided into pre- and post-rapid response team groups for comparison. A Cox proportional hazards model was used to identify the patient characteristics associated with mortality following unplanned PICU admission. Following rapid response team implementation, Pediatric Risk of Mortality, version 3, illness severity was reduced (28.7%), PICU length of stay was less (19.0%), and mortality declined (22%). Relative risk of death following unplanned admission to the PICU after rapid response team implementation was 0.685. For children requiring unplanned admission to the PICU, rapid response team implementation is associated with reduced mortality, admission severity of illness, and length of stay. Rapid response team implementation led to more proximal capture and aggressive intervention in the trajectory of a decompensating pediatric ward patient.

  19. Demand-side financing measures to increase maternal health service utilisation and improve health outcomes: a systematic review of evidence from low- and middle-income countries.

    Science.gov (United States)

    Murray, Susan F; Hunter, Benjamin M; Bisht, Ramila; Ensor, Tim; Bick, Debra

    2012-01-01

    In many countries financing for health services has traditionally been disbursed directly from governmental and non-governmental funding agencies to providers of services: the 'supply-side' of healthcare markets. Demand-side financing offers a supplementary model in which some funds are instead channelled through, or to, prospective users. In this review we considered evidence on five forms of demand-side financing that have been used to promote maternal health in developing countries: OBJECTIVES: The overall review objective was to assess the effects of demand-side financing interventions on maternal health service utilisation and on maternal health outcomes in low- and middle-income countries. Broader effects on perinatal and infant health, the situation of underprivileged women and the health care system were also assessed. This review considered poor, rural or socially excluded women of all ages who were either pregnant or within 42 days of the conclusion of pregnancy, the limit for postnatal care as defined by the World Health Organization. The review also considered the providers of services.The intervention of interest was any programme that incorporated demand-side financing as a mechanism to increase the consumption of goods and services that could impact on maternal health outcomes. This included the direct consumption of maternal health care goods and services as well as related 'merit goods' such as improved nutrition. We included systems in which potential users of maternal health services are financially empowered to make restricted decisions on buying maternal health-related goods or services - sometimes known as consumer-led demand-side financing. We also included programmes that provided unconditional cash benefits to pregnant women (for example in the form of maternity allowances), or to families with children under five years of age where there was evidence concerning maternal health outcomes.We aimed to include quantitative studies (experimental

  20. Rapid Response Teams: Is it Time to Reframe the Questions of Rapid Response Team Measurement?

    Science.gov (United States)

    Salvatierra, Gail G; Bindler, Ruth C; Daratha, Kenn B

    2016-11-01

    The purpose of this article is to present an overview of rapid response team (RRT) history in the United States, provide a review of prior RRT effectiveness research, and propose the reframing of four new questions of RRT measurement that are designed to better understand RRTs in the context of contemporary nursing practice as well as patient outcomes. RRTs were adopted in the United States because of their intuitive appeal, and despite a lack of evidence for their effectiveness. Subsequent studies used mortality and cardiac arrest rates to measure whether or not RRTs "work." Few studies have thoroughly examined the effect of RRTs on nurses and on nursing practice. An extensive literature review provided the background. Suppositions and four critical, unanswered questions arising from the literature are suggested. The results of RRT effectiveness, which have focused on patient-oriented outcomes, have been ambiguous, contradictory, and difficult to interpret. Additionally, they have not taken into account the multiple ways in which these teams have impacted nurses and nursing practice as well as patient outcomes. What happens in terms of RRT process and utilization is likely to have a major impact on nurses and nursing care on general medical and surgical wards. What that impact will be depends on what we can learn from measuring with an expanded yardstick, in order to answer the question, "Do RRTs work?" Evidence for the benefits of RRTs depends on proper framing of questions relating to their effectiveness, including the multiple ways RRTs contribute to nursing efficacy. © 2016 Sigma Theta Tau International.

  1. Exploring Tradeoffs in Demand-Side and Supply-Side Management of Urban Water Resources Using Agent-Based Modeling and Evolutionary Computation

    Directory of Open Access Journals (Sweden)

    Lufthansa Kanta

    2015-11-01

    Full Text Available Urban water supply systems may be managed through supply-side and demand-side strategies, which focus on water source expansion and demand reductions, respectively. Supply-side strategies bear infrastructure and energy costs, while demand-side strategies bear costs of implementation and inconvenience to consumers. To evaluate the performance of demand-side strategies, the participation and water use adaptations of consumers should be simulated. In this study, a Complex Adaptive Systems (CAS framework is developed to simulate consumer agents that change their consumption to affect the withdrawal from the water supply system, which, in turn influences operational policies and long-term resource planning. Agent-based models are encoded to represent consumers and a policy maker agent and are coupled with water resources system simulation models. The CAS framework is coupled with an evolutionary computation-based multi-objective methodology to explore tradeoffs in cost, inconvenience to consumers, and environmental impacts for both supply-side and demand-side strategies. Decisions are identified to specify storage levels in a reservoir that trigger: (1 increases in the volume of water pumped through inter-basin transfers from an external reservoir; and (2 drought stages, which restrict the volume of water that is allowed for residential outdoor uses. The proposed methodology is demonstrated for Arlington, Texas, water supply system to identify non-dominated strategies for an historic drought decade. Results demonstrate that pumping costs associated with maximizing environmental reliability exceed pumping costs associated with minimizing restrictions on consumer water use.

  2. Performance of the efferent limb of a rapid response system

    DEFF Research Database (Denmark)

    Sørensen, Emilie M; Petersen, Asger

    2015-01-01

    AIM: To determine the distribution of outcomes following a medical emergency team (MET) call using a modified version of the multidisciplinary audit and evaluation of outcomes of rapid response (MAELOR) tool, and to evaluate its usefulness in monitoring the performance of the efferent limb...... of the rapid response system (RRS) at our institution. METHOD: An observational study of prospectively collected data including all MET calls at our institution during the 36 weeks study period (23 December 2013 - 31 august 2014). Outcomes of MET calls were registered 24 h after the call occurred...

  3. Electricity decision-making: New techniques for calculating statewide economic impacts from new power supply and demand-side management programs

    Science.gov (United States)

    Tegen, Suzanne Isabel Helmholz

    This dissertation introduces new techniques for calculating and comparing statewide economic impacts from new coal, natural gas and wind power plants, as well as from demand-side management programs. The impetus for this work was two-fold. First, reviews of current literature and projects revealed that there was no standard way to estimate statewide economic impacts from new supply- and demand-side electricity options. Second, decision-makers who were interviewed stated that they were overwhelmed with data in general, but also lacked enough specific information about economic development impacts to their states from electricity, to make informed choices. This dissertation includes chapters on electricity decision-making and on economic impacts from supply and demand. The supply chapter compares different electricity options in three states which vary in natural resource content: Arizona, Colorado and Michigan. To account for differing capacity factors, resources are compared on a per-megawatt-hour basis. The calculations of economic impacts from new supply include: materials and labor for construction, operations, maintenance, fuel extraction, fuel transport, as well as property tax, financing and landowner revenues. The demand-side chapter compares residential, commercial and industrial programs in Iowa. Impact calculations include: incremental labor and materials for program planning, installation and operations, as well as sales taxes and electricity saved. Results from supply-side calculations in the three states analyzed indicate that adding new wind power can have a greater impact to a state's economy than adding new gas or coal power due to resource location, taxes and infrastructure. Additionally, demand-side management programs have a higher relative percentage of in-state dollar flow than supply-side solutions, though demand-side programs typically involve fewer MWh and dollars than supply-side generation. Methods for this dissertation include researching

  4. Rapid response teams: qualitative analysis of their effectiveness.

    Science.gov (United States)

    Leach, Linda Searle; Mayo, Ann M

    2013-05-01

    Multidisciplinary rapid response teams focus on patients' emergent needs and manage critical situations to prevent avoidable deaths. Although research has focused primarily on outcomes, studies of the actual team effectiveness within the teams from multiple perspectives have been limited. To describe effectiveness of rapid response teams in a large teaching hospital in California that had been using such teams for 5 years. The grounded-theory method was used to discover if substantive theory might emerge from interview and/or observational data. Purposeful sampling was used to conduct in-person semistructured interviews with 17 key informants. Convenience sampling was used for the 9 observed events that involved a rapid response team. Analysis involved use of a concept or indicator model to generate empirical results from the data. Data were coded, compared, and contrasted, and, when appropriate, relationships between concepts were formed. Results Dimensions of effective team performance included the concepts of organizational culture, team structure, expertise, communication, and teamwork. Professionals involved reported that rapid response teams functioned well in managing patients at risk or in crisis; however, unique challenges were identified. Teams were loosely coupled because of the inconsistency of team members from day to day. Team members had little opportunity to develop relationships or team skills. The need for team training may be greater than that among teams that work together regularly under less time pressure to perform. Communication between team members and managing a crisis were critical aspects of an effective response team.

  5. Market Design for Rapid Demand Response - The Case of Kenya

    OpenAIRE

    Kurt Nielsen; Tseganesh Wubale Tamirat

    2014-01-01

    We suggest a market design for rapid demand response in electricity markets. The solution consists of remotely controlled switches, meters, forecasting models as well as a flexible auction market to set prices and select endusers job by job. The auction market motivates truth-telling and makes it simple to involve the endusers in advance and to activate demand response immediately. The collective solution is analyzed and economic simulations are conducted for the case of Kenya. Kenya has been...

  6. Rapid Response Fault Drilling Past, Present, and Future

    Directory of Open Access Journals (Sweden)

    Demian M. Saffer

    2009-09-01

    Full Text Available New information about large earthquakes can be acquired by drilling into the fault zone quickly following a large seismic event. Specifically, we can learn about the levels of friction and strength of the fault which determine the dynamic rupture, monitor the healing process of the fault, record the stress changes that trigger aftershocks and capture important physical and chemical properties of the fault that control the rupture process. These scientific and associated technical issues were the focus of a three-day workshop on Rapid Response Fault Drilling: Past, Present, and Future, sponsored by the International Continental Scientific Drilling Program (ICDP and the Southern California Earthquake Center (SCEC. The meeting drewtogether forty-four scientists representing ten countries in Tokyo, Japan during November 2008. The group discussed the scientific problems and how they could be addressed through rapid response drilling. Focused talks presented previous work on drilling after large earthquakes and in fault zones in general, as well as the state of the art of experimental techniques and measurement strategies. Detailed discussion weighed the tradeoffs between rapid drilling andthe ability to satisfy a diverse range of scientific objectives. Plausible drilling sites and scenarios were evaluated. This is a shortened summary of the workshop report that discusses key scientific questions, measurement strategies, and recommendations. This report can provide a starting point for quickly mobilizing a drilling program following future large earthquakes. The full report can be seen at http://www.pmc.ucsc.edu/~rapid/.

  7. Forecasting wildlife response to rapid warming in the Alaskan Arctic

    Science.gov (United States)

    Van Hemert, Caroline R.; Flint, Paul L.; Udevitz, Mark S.; Koch, Joshua C.; Atwood, Todd C.; Oakley, Karen L.; Pearce, John M.

    2015-01-01

    Arctic wildlife species face a dynamic and increasingly novel environment because of climate warming and the associated increase in human activity. Both marine and terrestrial environments are undergoing rapid environmental shifts, including loss of sea ice, permafrost degradation, and altered biogeochemical fluxes. Forecasting wildlife responses to climate change can facilitate proactive decisions that balance stewardship with resource development. In this article, we discuss the primary and secondary responses to physical climate-related drivers in the Arctic, associated wildlife responses, and additional sources of complexity in forecasting wildlife population outcomes. Although the effects of warming on wildlife populations are becoming increasingly well documented in the scientific literature, clear mechanistic links are often difficult to establish. An integrated science approach and robust modeling tools are necessary to make predictions and determine resiliency to change. We provide a conceptual framework and introduce examples relevant for developing wildlife forecasts useful to management decisions.

  8. The making of a market. Supply- and demand-side perspectives on institutional innovation in Sweden's wood fuel use

    International Nuclear Information System (INIS)

    2001-01-01

    This thesis documents and analyses the rapidly increasing wood fuel use in Sweden in five separate studies of prominent actors in the making of the wood fuel market. These studies report government policy, forest owners' incentives, and district heating companies' experiences. The development of wood fuel use is examined as a story of technological and institutional change initially prompted by government policy. The change has involved dedicated action among all of the actors, with the Swedish government initiating new policies, legislation, and information activities, with district heating companies investing in new technology and trading, and with forest owners making new decisions on forest management practices. Institutional change in the wood fuel sector, in other words, is the result of innovation on the part of the actors involved. The papers included in the study identify and analyse concerns of the actors involved in making the wood fuel market. Within the district heating sector, transaction costs, as measured by problems to trade perceived by managements, have decreased with learning. Transformation costs, due to technical problems, are not perceived to have followed this trend. Technical investments in heat production have a long technical life time and demand large investment costs. This in turn means long planning and decision periods. Investments are made for a number of company-specific reasons, perhaps most importantly simply to increase heat and/or electricity generation capacity. Policy instruments may tip a decision in favor of wood fuels, but they could not be the single parameter determining company investments. Two kinds of forest owners selling wood fuels were identified, a forest manager type who acts more on his/her own initiative, and another kind, who relies more on the advice of the traditional timber buyer. Forest owners selling wood fuels contemplating whether to sell wood fuels or not are strongly influenced by soil fertility

  9. Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing

    Science.gov (United States)

    Hu, Yu-Chen

    2018-01-01

    The emergence of smart Internet of Things (IoT) devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR) schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO)-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power consumption is achieved

  10. Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing

    Directory of Open Access Journals (Sweden)

    Yu-Hsiu Lin

    2018-04-01

    Full Text Available The emergence of smart Internet of Things (IoT devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power

  11. Residential Consumer-Centric Demand-Side Management Based on Energy Disaggregation-Piloting Constrained Swarm Intelligence: Towards Edge Computing.

    Science.gov (United States)

    Lin, Yu-Hsiu; Hu, Yu-Chen

    2018-04-27

    The emergence of smart Internet of Things (IoT) devices has highly favored the realization of smart homes in a down-stream sector of a smart grid. The underlying objective of Demand Response (DR) schemes is to actively engage customers to modify their energy consumption on domestic appliances in response to pricing signals. Domestic appliance scheduling is widely accepted as an effective mechanism to manage domestic energy consumption intelligently. Besides, to residential customers for DR implementation, maintaining a balance between energy consumption cost and users’ comfort satisfaction is a challenge. Hence, in this paper, a constrained Particle Swarm Optimization (PSO)-based residential consumer-centric load-scheduling method is proposed. The method can be further featured with edge computing. In contrast with cloud computing, edge computing—a method of optimizing cloud computing technologies by driving computing capabilities at the IoT edge of the Internet as one of the emerging trends in engineering technology—addresses bandwidth-intensive contents and latency-sensitive applications required among sensors and central data centers through data analytics at or near the source of data. A non-intrusive load-monitoring technique proposed previously is utilized to automatic determination of physical characteristics of power-intensive home appliances from users’ life patterns. The swarm intelligence, constrained PSO, is used to minimize the energy consumption cost while considering users’ comfort satisfaction for DR implementation. The residential consumer-centric load-scheduling method proposed in this paper is evaluated under real-time pricing with inclining block rates and is demonstrated in a case study. The experimentation reported in this paper shows the proposed residential consumer-centric load-scheduling method can re-shape loads by home appliances in response to DR signals. Moreover, a phenomenal reduction in peak power consumption is achieved

  12. Spatial heterogeneity in utilities, equity and collective efficiency: the case of rural electrification and demand side management

    International Nuclear Information System (INIS)

    Nadaud, F.

    2005-11-01

    This thesis has for object the evolution of the economic optimum in the electric industry under spatial equity constraint that present a strong spatial heterogeneity of its supply conditions. One analyses the evolution of the rural electrification regime in France both in terms of economic and social efficiency. We examine the rationality of extending the sectoral optimization under equity constraint to the rationalization of electricity end-uses in the heterogeneous space of rural electricity supply. To this question are given two responses. The firsts pertains to modify the incentives in the institutional regime of rural electrification so the MDE may be integrated in the strategies of rural electrification syndicates. One inspire from incentives mechanisms of the anglo-saxon DSM practice. The second is statistical zoning method of demand and distribution grid whose object is to localize action basins for large scale MDE projects. (author)

  13. The limitations in implementing and operating a rapid response system.

    Science.gov (United States)

    Subramaniam, A; Botha, J; Tiruvoipati, R

    2016-10-01

    Despite the widespread introduction of rapid response systems (RRS)/medical emergency teams (MET), there is still controversy regarding how effective they are. While there are some observational studies showing improved outcomes with RRS, there are no data from randomised controlled trials to support the effectiveness. Nevertheless, the MET system has become a standard of care in many healthcare organisations. In this review, we present an overview of the limitations in implementing and operating a RRS in modern healthcare. © 2016 Royal Australasian College of Physicians.

  14. A Smart Grid Framework for Optimally Integrating Supply-Side, Demand-Side and Transmission Line Management Systems

    Directory of Open Access Journals (Sweden)

    Chukwuka Monyei

    2018-04-01

    Full Text Available A coordinated centralized energy management system (ConCEMS is presented in this paper that seeks to integrate for optimal grid operation—the supply side energy management system (SSEMS, home energy management system (HEMS and transmission line management system (TLMS. ConCEMS in ensuring the optimal operation of an IEEE 30-bus electricity network harmonizes the individual objective function of SSEMS, HEMS and TLMS to evolve an optimal dispatch of participating demand response (DR loads that does not violate transmission line ampacity limits (TLMS constraint while minimizing consumer cost (HEMS constraint and supply side operations cost (SSEMS constraint. An externally constrained genetic algorithm (ExC-GA that is influenced by feedback from TLMS is also presented that intelligently varies the dispatch time of participating DR loads to meet the individual objective functions. Hypothetical day ahead dynamic pricing schemes (Price1, Price2 and Price3 have also been adopted alongside an existing time of use (Price0 pricing scheme for comparison and discussion while a dynamic thermal line rating (DTLR algorithm has also been incorporated to dynamically compute power limits based on real time associated data.

  15. Expanding health insurance scheme in the informal sector in Nigeria: awareness as a potential demand-side tool.

    Science.gov (United States)

    Adewole, David Ayobami; Akanbi, Saidat Abisola; Osungbade, Kayode Omoniyi; Bello, Segun

    2017-01-01

    The implementation and expansion of a health insurance scheme in the informal sector, particularly in developing countries, is a challenge. With the aid of an innovative Information-Education and Communication model, titled 'Understanding the concept of health insurance: An innovative social marketing tool', an assessment of the awareness and perception of the scheme among market women was carried out. This is a cross-sectional descriptive survey, carried out among market women in Ibadan, Nigeria. In a multi-stage sampling technique, a total of 351 women were interviewed using an interviewer-administered, semi-structured questionnaire. The data was analysed using SPSS version 16. Chi-square test was used to test associations between selected variables of interest. Logistic regression model was used to determine predictors of awareness of the National Health Insurance Scheme (NHIS). A model controlling for participants' enrolment status was built and Adjusted Odds Ratio (AOR) reported. Level of statistical significance was set at p market women aged 18 years and above participated in the study, a response rate of 98.0%. Respondents' educational status was the only predictor significantly associated with awareness of the NHIS. Respondents with post-primary education had 10 times the odds of being aware of the NHIS than respondents with no education or only primary education (Adjusted Odds Ratio = 10.3; 95% CI = 4.1-26.0). Innovative models to enable potential beneficiaries, especially among the informal sector, to better comprehend and accept the concept of prepayment methods of financing healthcare costs is important in efforts to implement and expand a social health insurance scheme.

  16. Simple models of district heating systems for load and demand side management and operational optimisation; Simple modeller for fjernvarmesystemer med henblik pae belastningsudjaevning og driftsoptimering

    Energy Technology Data Exchange (ETDEWEB)

    Boehm, B. [Technical Univ. of Denmark, Dept. of Mechanical Engineering, Kgs. Lyngby (Denmark); Larsen, H.V. [Risoe National Lab., System Analysis Dept., Roskilde (DK)

    2004-12-01

    The purpose of this research project has been to further develop and test simple (aggregated) models of district heating (DH) systems for simulation and operational optimization, and to investigate the influence of Load Management and Demand Side Management (DMS) on the total operational costs. The work is based on physical-mathematical modelling and simulation of DH systems, and is a continuation of previous EFP-96 work. In the present EFP-2001 project the goals have been to improve the Danish method of aggregation by addressing the problem of aggregation of pressure losses, and to test the methods on a much larger data set than in the EFP-1996 project. In order to verify the models it is crucial to have good data at disposal. Full information on the heat loads and temperatures not only at the DH plant but also at every consumer (building) is needed, and therefore only a few DH systems in Denmark can supply such data. (BA)

  17. Intelligent Demand Side Management within production systems. Towards Industrial Smart Grids; Intelligente Lastverschiebung in der Produktionstechnik. Ein Weg zum Industrial Smart Grid

    Energy Technology Data Exchange (ETDEWEB)

    Schriegel, Sebastian; Pethig, Florian; Jasperneite, Juergen [Fraunhofer-Anwendungszentrum Industrial Automation (IOSB-INA), Lemgo (Germany)

    2012-07-01

    Demand Side Management is a key technology of smart grids. Consumers adjust their energy consumption at current time-volatile energy generation capacity. The currently used energy consumption optimizations, such as the use of energy efficient actuators, pause functions and peak load management should be supplemented by a dynamic real-time energy management. For industrial consumers, such an energy management may be established at various levels of the automation pyramid. On plant level energy optimization is based on predictions, on control and field level optimization is based on process variables. The taxonomy of potential energy optimization differentiates between organizational, synchronization and single parameter optimization. This potential can be exploited with intelligent control technology based on qualified process models and tunable control programs. An Industrial Smart Grid results by interlinking the former mentioned intelligent control technologies with the plant infrastructure and thereby provides an optimal energy consumption behavior and a perfect integration into and interaction with the smart grid. (orig.)

  18. Market-pull report. Measures on the demand side accelerate development and market introduction of energy-saving technologies. Swiss examples in the international context

    International Nuclear Information System (INIS)

    Bachmann, C.; Aebischer, B.

    1995-09-01

    International Energy Agency (IEA) experts met in Zurich in order to further develop international projects for the coordinated procurement of energy-saving technologies. On the occasion of this meeting, Swiss specialists from business and administrative circles presented examples of how the market can be purposefully influenced by implementing measures on the demand side. In order to ensure success, it is vital that all parties concerned - from the manufacturers to the consumers - are taken into account, and that tools are applied that have been adapted to each individual market. An international coordination of activities that are aimed at bringing about a change in procurement behaviour contributes considerably to an acceleration of the various processes. For the manufacturers, most of whom are active on an international level, it becomes simpler and more worthwhile to react. This applies in particular when instruments such as quality seals (labels) and target values are applied. (author) figs., tabs

  19. Acute renal response to rapid onset respiratory acidosis.

    Science.gov (United States)

    Ramadoss, Jayanth; Stewart, Randolph H; Cudd, Timothy A

    2011-03-01

    Renal strong ion compensation to chronic respiratory acidosis has been established, but the nature of the response to acute respiratory acidosis is not well defined. We hypothesized that the response to acute respiratory acidosis in sheep is a rapid increase in the difference in renal fractional excretions of chloride and sodium (Fe(Cl) - Fe(Na)). Inspired CO(2) concentrations were increased for 1 h to significantly alter P(a)CO(2) and pH(a) from 32 ± 1 mm Hg and 7.52 ± 0.02 to 74 ± 2 mm Hg and 7.22 ± 0.02, respectively. Fe(Cl) - Fe(Na) increased significantly from 0.372 ± 0.206 to 1.240 ± 0.217% and returned to baseline at 2 h when P(a)CO(2) and pH(a) were 37 ± 0.6 mm Hg and 7.49 ± 0.01, respectively. Arterial pH and Fe(Cl) - Fe(Na) were significantly correlated. We conclude that the kidney responds rapidly to acute respiratory acidosis, within 30 min of onset, by differential reabsorption of sodium and chloride.

  20. Emission impacts of demand-side programs: What have we achieved so far and how will recent policy decision change program choices?

    International Nuclear Information System (INIS)

    Tempchin, R.S.; Van den Berg, A.J.; Geba, V.B.; Felix, C.S.; Goldsmith, M.W.

    1990-01-01

    Congress and many state legislatures have been discussing the possibility of regulating carbon dioxide (CO 2 ), Sulfur dioxide (SO 2 ), nitrogen oxides (NO x ), chlorofluorocarbons (CFC's) and other emissions. Key to these discussions is the recommendation that energy efficiency, and specifically electric utility demand-side management (DSM) programs, be used as an emission control option. Methods for incorporating the social or external costs of energy production into utility planning are being developed, and estimates of potential emission impacts attributed to DSM programs have been calculated. However, little research has calculated the actual emission impacts from existing DSM programs. The increasing need for electric energy services and fossil fuel generation create an apparent conflict with the risks and regulations associated with global climate change and clean air. Electric utility DSM programs can be used to resolve these conflicts by providing equal or better energy services and a net reduction in emissions. This paper summarizes three separate related research projects. The first study, Impacts of Electric Utility Demand-Side Management Programs on Power Plant Emissions, collects utility and state data on existing DSM programs to approximate the level of SO 2 , NO x , and CO 2 reductions on a regional and national basis. Phase 1 of this study is a completed survey of DSM savings by state. The second and third studies, Carbon Dioxide Reduction Through Electrification of the Industrial and Transportation Sectors, and Carbon Dioxide Reduction Through Electrification of the Residential and Commercial Sectors, compare selected high efficiency electric technologies with fossil-fueled alternatives to determine CO 2 emissions. Through these studies, the authors have begun to quantify the emissions impacts from utility DSM programs and efficient electric equipment

  1. Multiple policies to enhance prescribing efficiency for established medicines in Europe with a particular focus on demand-side measures: findings and future implications

    Directory of Open Access Journals (Sweden)

    Brian eGodman

    2014-06-01

    Full Text Available Introduction: The appreciable growth in pharmaceutical expenditure has resulted in multiple initiatives across Europe to lower generic prices and enhance their utilisation. However, considerable variation in their use and prices. Objective: Assess the influence of multiple supply and demand-side initiatives across Europe for established medicines to enhance prescribing efficiency before a decision to prescribe a particular medicine. Subsequently utilise the findings to suggest potential future initiatives that countries could consider. Method: Analysis of different methodologies involving cross national and single country retrospective observational studies on reimbursed use and expenditure of PPIs, statins and renin-angiotensin inhibitor drugs among European countries. Results: Nature and intensity of the various initiatives appreciably influenced prescribing behaviour and expenditure, e.g. multiple measures resulted in reimbursed expenditure for PPIs in Scotland in 2010 56% below 2001 levels despite a 3 fold increase in utilisation and in the Netherlands, PPI expenditure fell by 58% in 2010 vs. 2000 despite a 3-fold increase in utilisation. A similarly picture was seen with prescribing restrictions, i.e. (i more aggressive follow-up of prescribing restrictions for patented statins and ARBs resulted in a greater reduction in the utilisation of patented statins in Austria vs. Norway and lower utilisation of patented ARBs vs. generic ACEIs in Croatia than Austria. However, limited impact of restrictions on esomeprazole in Norway with the first prescription or recommendation in hospital where restrictions do not apply. Similar findings when generic losartan became available in Western Europe. Conclusions: Multiple demand-side measures are needed to influence prescribing patterns. When combined with supply-side measures, activities can realise appreciable savings. Health authorities cannot rely on a ‘spill over’ effect between classes to affect

  2. Comparing Demand Side Management approaches

    NARCIS (Netherlands)

    Molderink, Albert; Bakker, Vincent; Hurink, Johann L.; Smit, Gerardus Johannes Maria

    2012-01-01

    Due to increasing energy prices and the greenhouse effect, a more efficient energy supply is desirable, preferably based on renewable sources. To cope with the decrease of flexibility due to the introduction of renewables in production side of the supply chain, a more flexible consumer side is

  3. Information needs for the rapid response team electronic clinical tool.

    Science.gov (United States)

    Barwise, Amelia; Caples, Sean; Jensen, Jeffrey; Pickering, Brian; Herasevich, Vitaly

    2017-10-02

    Information overload in healthcare is dangerous. It can lead to critical errors and delays. During Rapid Response Team (RRT) activations providers must make decisions quickly to rescue patients from physiological deterioration. In order to understand the clinical data required and how best to present that information in electronic systems we aimed to better assess the data needs of providers on the RRT when they respond to an event. A web based survey to evaluate clinical data requirements was created and distributed to all RRT providers at our institution. Participants were asked to rate the importance of each data item in guiding clinical decisions during a RRT event response. There were 96 surveys completed (24.5% response rate) with fairly even distribution throughout all clinical roles on the RRT. Physiological data including heart rate, respiratory rate, and blood pressure were ranked by more than 80% of responders as being critical information. Resuscitation status was also considered critically useful by more than 85% of providers. There is a limited dataset that is considered important during an RRT. The data is widely available in EMR. The findings from this study could be used to improve user-centered EMR interfaces.

  4. Rapid screening of radioactivity in food for emergency response

    International Nuclear Information System (INIS)

    Bari, A.; Khan, A.J.; Semkow, T.M.; Syed, U.-F.; Roselan, A.; Haines, D.K.; Roth, G.; West, L.; Arndt, M.

    2011-01-01

    This paper describes the development of methods for the rapid screening of gross alpha (GA) and gross beta (GB) radioactivity in liquid foods, specifically, Tang drink mix, apple juice, and milk, as well as screening of GA, GB, and gamma radioactivity from surface deposition on apples. Detailed procedures were developed for spiking of matrices with 241 Am (alpha radioactivity), 90 Sr/ 90 Y (beta radioactivity), and 60 Co, 137 Cs, and 241 Am (gamma radioactivity). Matrix stability studies were performed for 43 days after spiking. The method for liquid foods is based upon rapid digestion, evaporation, and flaming, followed by gas proportional (GP) counting. For the apple matrix, surface radioactivity was acid-leached, followed by GP counting and/or gamma spectrometry. The average leaching recoveries from four different apple brands were between 63% and 96%, and have been interpreted on the basis of ion transport through the apple cuticle. The minimum detectable concentrations (MDCs) were calculated from either the background or method-blank (MB) measurements. They were found to satisfy the required U.S. FDA's Derived Intervention Levels (DILs) in all but one case. The newly developed methods can perform radioactivity screening in foods within a few hours and have the potential to capacity with further automation. They are especially applicable to emergency response following accidental or intentional contamination of food with radioactivity.

  5. Rapid screening of radioactivity in food for emergency response.

    Science.gov (United States)

    Bari, A; Khan, A J; Semkow, T M; Syed, U-F; Roselan, A; Haines, D K; Roth, G; West, L; Arndt, M

    2011-06-01

    This paper describes the development of methods for the rapid screening of gross alpha (GA) and gross beta (GB) radioactivity in liquid foods, specifically, Tang drink mix, apple juice, and milk, as well as screening of GA, GB, and gamma radioactivity from surface deposition on apples. Detailed procedures were developed for spiking of matrices with (241)Am (alpha radioactivity), (90)Sr/(90)Y (beta radioactivity), and (60)Co, (137)Cs, and (241)Am (gamma radioactivity). Matrix stability studies were performed for 43 days after spiking. The method for liquid foods is based upon rapid digestion, evaporation, and flaming, followed by gas proportional (GP) counting. For the apple matrix, surface radioactivity was acid-leached, followed by GP counting and/or gamma spectrometry. The average leaching recoveries from four different apple brands were between 63% and 96%, and have been interpreted on the basis of ion transport through the apple cuticle. The minimum detectable concentrations (MDCs) were calculated from either the background or method-blank (MB) measurements. They were found to satisfy the required U.S. FDA's Derived Intervention Levels (DILs) in all but one case. The newly developed methods can perform radioactivity screening in foods within a few hours and have the potential to capacity with further automation. They are especially applicable to emergency response following accidental or intentional contamination of food with radioactivity. Published by Elsevier Ltd.

  6. Applying Bayesian belief networks in rapid response situations

    Energy Technology Data Exchange (ETDEWEB)

    Gibson, William L [Los Alamos National Laboratory; Deborah, Leishman, A. [Los Alamos National Laboratory; Van Eeckhout, Edward [Los Alamos National Laboratory

    2008-01-01

    The authors have developed an enhanced Bayesian analysis tool called the Integrated Knowledge Engine (IKE) for monitoring and surveillance. The enhancements are suited for Rapid Response Situations where decisions must be made based on uncertain and incomplete evidence from many diverse and heterogeneous sources. The enhancements extend the probabilistic results of the traditional Bayesian analysis by (1) better quantifying uncertainty arising from model parameter uncertainty and uncertain evidence, (2) optimizing the collection of evidence to reach conclusions more quickly, and (3) allowing the analyst to determine the influence of the remaining evidence that cannot be obtained in the time allowed. These extended features give the analyst and decision maker a better comprehension of the adequacy of the acquired evidence and hence the quality of the hurried decisions. They also describe two example systems where the above features are highlighted.

  7. Rapid enzymatic response to compensate UV radiation in copepods.

    Directory of Open Access Journals (Sweden)

    María Sol Souza

    Full Text Available Ultraviolet radiation (UVR causes physical damage to DNA, carboxylation of proteins and peroxidation of lipids in copepod crustaceans, ubiquitous and abundant secondary producers in most aquatic ecosystems. Copepod adaptations for long duration exposures include changes in behaviour, changes in pigmentation and ultimately changes in morphology. Adaptations to short-term exposures are little studied. Here we show that short-duration exposure to UVR causes the freshwater calanoid copepod, Eudiaptomus gracilis, to rapidly activate production of enzymes that prevent widespread collateral peroxidation (glutathione S-transferase, GST, that regulate apoptosis cell death (Caspase-3, Casp-3, and that facilitate neurotransmissions (cholinesterase-ChE. None of these enzyme systems is alone sufficient, but they act in concert to reduce the stress level of the organism. The interplay among enzymatic responses provides useful information on how organisms respond to environmental stressors acting on short time scales.

  8. Measurement of amplitude fluctuations in a rapid response photomultiplier

    International Nuclear Information System (INIS)

    Raimbault, P.

    1961-01-01

    In order to measure amplitude fluctuations in a rapid response photomultiplier, two independent random variables are introduced which determine the shape of the anode pulse. The energy of each pulse, which depends directly on the gain and the variance, is the first variable; amplitude fluctuations, functions of the first variable, depend as well on the pulse width which in turn constitutes the second variable. The results obtained on the variations of the maximum impulse, using a steep-edged pulse broadening circuit, and those obtained on the statistical variations of the gain, are compared to show that the variance relative to the maximum amplitude of the signal is greater than that of the gain. Within the limits of these fluctuations are shown the contribution of the secondary emission coefficient of the first dynode, and that of the mean secondary emission coefficient of the multiplier. (author) [fr

  9. Rapid response to syphilis outbreak among female sex workers

    Directory of Open Access Journals (Sweden)

    Shaily B Surti

    2017-01-01

    Full Text Available Background: Outbreak of syphilis, i.e., 16 cases of rapid plasma reagin (RPR reactive cases of syphilis was reported in Community Based Organization (CBO Sahyog of Surat, India, from April to August 2014. The aim of the study was to find risk factors and take immediate actions to prevent spread. Materials and Methods: Outbreak investigation of 16 Female Sex Workers of CBO Sahyog in Surat who were found Rapid Plasma Reagin (RPR and Treponema Pallidum Hemagglutination Assay (TPHA positive from April to August 2014; was carried out. Clinico-epidemiological and laboratory-based evidence for different sexually transmitted infections (STIs conducted at Government Medical College, New Civil Hospital, Surat. Root cause analysis (RCA of index case was carried out. Results: Desk review for the past 3 years data of STI revealed total STI cases as 88 (2011, 95 (2012, and 130 (2013, of which 4, 2, and 2 found RPR reactive, respectively. Data from April to August 2014 revealed 16 RPR reactive cases and confirmed by TPHA. On examination, one had ulcerative cervical lesion, rest did not have any symptoms of syphilis. Eleven had vaginal/cervical discharge, 11 had lower abdominal pain. A total of 11 had unprotected sex, 7 encountered condom tear in the past 6 months, and 5 reported sexual violence. Seven had sexual activity under influence of alcohol. Laboratory investigation revealed two as HIV-positive. RPR reactivity reported highest (9 out of 16 from same area of hotspot. RCA of probable index case revealed factors responsible as violence and nonuse of condoms. Conclusions: Outbreak investigation revealed one probable index case. All 16 treated with injection Penidure. Violence or condom tear is responsible for the spread. Crisis management team should be strengthened.

  10. The Deployable Operations Group: A Model for a National Unified Interagency Rapid Response Command

    National Research Council Canada - National Science Library

    Cooper, Eric M

    2008-01-01

    .... Since the attacks, nationwide preparedness efforts have established numerous federal rapid response teams, which are coordinated during a federal interagency response under the National Incident Management System...

  11. Governance of rapid response teams in Australia and New Zealand.

    Science.gov (United States)

    Sethi, S S; Chalwin, R

    2018-05-01

    Rapid response systems (RRS) in hospitals in Australia and New Zealand (ANZ) have been present for more than 20 years but governance of the efferent limb-the rapid response team (RRT)-has not been previously reported in detail. The objectives of this study were to describe current governance arrangements for RRTs within ANZ and contrast those against expected implementation, using the Australian Commission for Safety and Quality in Health Care National Standard 9 (S9) as a benchmark. Assessment focused on S9 subclauses 9.1.1 (governance and oversight), 9.1.2 (RRT implementation), 9.2.3 (data collection and dissemination), 9.2.4 (quality improvement), 9.5.2 (call reviews), 9.6.1 and 9.6.2 (basic and advanced life support [ALS] skill set). We identified public and private hospitals across ANZ from government-maintained registers. Those reasonably expected to have an RRT were contacted and invited to participate. Responses were obtained via an online anonymised questionnaire. Three hundred and forty-two hospitals were contacted, of whom 284 (83.0%) responded. Two hundred and thirty-two hospitals submitted data, and the other 52 declined to participate or did not have an RRT. In hospitals with an intensive care unit (ICU), intensivist attendance at RRT calls occurred less often outside office hours (odds ratio, OR, 0.49, 95% confidence interval, CI, 0.32 to 0.75]). Where intensivists were not on the RRT, consultation with them about calls also occurred less often outside office hours (OR 0.39, 95% CI 0.22 to 0.66). Consultation with patients' admitting specialists occurred more often during office hours versus out of hours RRT calls and in private versus public hospitals. The presence of ICU staff on the RRT decreased the likelihood of admitting specialists being consulted about RRT calls (OR 0.66, 95% CI 0.47 to 0.93). Most hospitals maintained databases of RRT calls and regularly audited RRT activity (92% and 90% respectively). However, most (63.7%) did not make that

  12. “Souls of the ancestor that knock us out” and other tales. A qualitative study to identify demand-side factors influencing malaria case management in Cambodia

    Directory of Open Access Journals (Sweden)

    O’Connell Kathryn A

    2012-10-01

    Full Text Available Abstract Background Appropriate case management of suspected malaria in Cambodia is critical given anti-malarial drug resistance in the region. Improving diagnosis and the use of recommended malarial treatments is a challenge in Cambodia where self-treatment and usage of drug cocktails is widespread, a notable difference from malaria treatment seeking in other countries. This qualitative study adds to the limited evidence base on Cambodian practices, aiming to understand the demand-side factors influencing treatment-seeking behaviour, including the types of home treatments, perceptions of cocktail medicines and reasons for diagnostic testing. The findings may help guide intervention design. Methods The study used in-depth interviews (IDIs (N = 16 and focus group discussions (FGDs (N = 12 with Cambodian adults from malaria-endemic areas who had experienced malaria fever in the previous two weeks. Data were analysed using NVivo software. Results Findings suggest that Cambodians initially treat suspected malaria at home with home remedies and traditional medicines. When seeking treatment outside the home, respondents frequently reported receiving a cocktail of medicines from trusted providers. Cocktails are perceived as less expensive and more effective than full-course, pre-packaged medicines. Barriers to diagnostic testing include a belief in the ability to self-diagnose based on symptoms, cost and reliance on providers to recommend a test. Factors that facilitate testing include recommendation by trusted providers and a belief that anti-malarial treatment for illnesses other than malaria can be harmful. Conclusions Treatment-seeking behaviour for malaria in Cambodia is complex, driven by cultural norms, practicalities and episode-related factors. Effective malaria treatment programmes will benefit from interventions and communication materials that leverage these demand-side factors, promoting prompt visits to facilities for suspected

  13. Climate-related electricity demand-side management in oil-exporting countries--the case of the United Arab Emirates

    International Nuclear Information System (INIS)

    Al-Iriani, Mahmoud A.

    2005-01-01

    The oil crisis of the 1970s has increased the concern about the continuity of oil imports flow to major oil-importing developed countries. Numerous policy measures including electricity demand-side management (DSM) programs have been adopted in such countries. These measures aim at reducing the growing need for electricity power that increases the dependency on imported foreign oil and damages the environment. On the other hand, the perception that energy can be obtained at very low cost in oil-rich countries led to less attention being paid to the potential of DSM policies in these countries. This paper discusses such potential using the case of the United Arab Emirates (UAE). Since air conditioning is a major source of electric energy consumption, the relationship between climate conditions and electric energy consumption is considered. An electricity demand model is constructed using time series techniques. The fitted model seems to represent these relationships rather well. Forecasts for electricity consumption using the estimated model indicate that a small reduction in cooling degrees requirement might induce a significant reduction in electric energy demand. Hence, a DSM program is proposed with policy actions to include, among others, measures to reduce cooling degrees requirement

  14. Examining the potential of natural gas demand-side measures to benefit customers, the distribution utility, and the environment: two case studies from Europe

    International Nuclear Information System (INIS)

    Almeida, A.T. de; Carvalho, A.; Mariano, J.; Broege, M.

    2004-01-01

    The aim of this paper is to demonstrate how integrated resource planning (IRP) oriented to the gas sector can be applied both in new networks and in mature networks, and to present the advantages of its application. One case study is described, in the western central region of Portugal, to illustrate the results of a pilot project on natural gas IRP implementation in a new network in the European Union (EU). The city of Burg, Germany, with a mature gas network with district heating was also analysed in terms of IRP potential. The most important phases of the integrated resource plan definition and implementation (especially those oriented to the demand-side) are presented, namely, the definition of the most efficient technologies (including solar energy), fuel-switching possibilities, a detailed study of the impacts in the economy, environment and society, and the policy incentives necessary to motivate the gas utility companies to perform IRP. In the main case study, the suggested implementation plan would lead to a reduction of around 4.7% in natural gas consumption. Additionally, 13.3% of cost-effective fuel switching from other competing forms of energy to natural gas can be achieved. A proposed EU energy services directive on mandatory energy-efficiency activities for gas and electricity distribution utilities in the EU, will promote the large-scale implementation of the proposed approach in Europe. (author)

  15. A study protocol: using demand-side financing to meet the birth spacing needs of the underserved in Punjab Province in Pakistan.

    Science.gov (United States)

    Azmat, Syed Khurram; Ali, Moazzam; Hameed, Waqas; Mustafa, Ghulam; Abbas, Ghazanfer; Ishaque, Muhammad; Bilgrami, Mohsina; Temmerman, Marleen

    2014-05-30

    High fertility rates, unwanted pregnancies, low modern contraceptive prevalence and a huge unmet need for contraception adversely affect women's health in Pakistan and this problem is compounded by limited access to reliable information and quality services regarding birth spacing especially in rural and underserved areas. This paper presents a study protocol that describes an evaluation of a demand-side financing (DSF) voucher approach which aims to increase the uptake of modern contraception among women of the lowest two wealth quintiles in Punjab Province, Pakistan. This study will use quasi-experimental design with control arm and be implemented in: six government clinics from the Population Welfare Department; 24 social franchise facilities branded as 'Suraj' (Sun), led by Marie Stopes Society (a local non-governmental organization); and 12 private sector clinics in Chakwal, Mianwali and Bhakkar districts. The study respondents will be interviewed at baseline and endline subject to voluntary acceptance and medical eligibility. In addition, health service data will record each client visit during the study period. The study will examine the impact of vouchers in terms of increasing the uptake of modern contraception by engaging private and public sector service providers (mid-level and medical doctors). If found effective, this approach can be a viable solution to satisfying the current demand and meeting the unmet need for contraception, particularly among the poorest socio-economic group.

  16. A study protocol: using demand-side financing to meet the birth spacing needs of the underserved in Punjab Province in Pakistan

    Science.gov (United States)

    2014-01-01

    Background High fertility rates, unwanted pregnancies, low modern contraceptive prevalence and a huge unmet need for contraception adversely affect women’s health in Pakistan and this problem is compounded by limited access to reliable information and quality services regarding birth spacing especially in rural and underserved areas. This paper presents a study protocol that describes an evaluation of a demand-side financing (DSF) voucher approach which aims to increase the uptake of modern contraception among women of the lowest two wealth quintiles in Punjab Province, Pakistan. Methods/Design This study will use quasi-experimental design with control arm and be implemented in: six government clinics from the Population Welfare Department; 24 social franchise facilities branded as ‘Suraj’ (Sun), led by Marie Stopes Society (a local non-governmental organization); and 12 private sector clinics in Chakwal, Mianwali and Bhakkar districts. The study respondents will be interviewed at baseline and endline subject to voluntary acceptance and medical eligibility. In addition, health service data will record each client visit during the study period. Discussion The study will examine the impact of vouchers in terms of increasing the uptake of modern contraception by engaging private and public sector service providers (mid-level and medical doctors). If found effective, this approach can be a viable solution to satisfying the current demand and meeting the unmet need for contraception, particularly among the poorest socio-economic group. PMID:24885657

  17. Organizing company specialists for rapid and effective response

    International Nuclear Information System (INIS)

    Jardim, G.M.; McDermott, H.J.

    1993-01-01

    The staff needed for the support of cleanup operations can be large even for moderately sized spills. Marshallng sufficient and qualified people to respond on short notice at locations throughout the world can tax even the largest corporations. This paper describes how Chevron has prepared for this important aspect of spill response. Basically, Chevron has formed 13 separate teams covering specially areas such as safety, finance, public relations, and legal. Each team is organized and managed by people who regularly work within that function. Members of each team are regular employees of the various Chevron companies throughout the world. The incident command system and coordinated plans are the common threads which allow these groups to work together effectively. Drills and self-audits are used to keep the plans current and team members prepared. The organization and activities of the Safety, Fire and Health (SF ampersand H) Functional Team is described in detail as an illustrated example of the functional team approach. This team consists of about 50 professionals in related fields. To facilitate rapid mobilization worldwide, each member has been medically qualified and has a current passport and selected evaluations. The team plan outlines the responsibilities of each professional group, the call-out procedure and telephone lists, and information on pre-identified SF ampersand H contractors that can be called upon if additional resources are needed. The plan is flexible so that it can be used by one or two people to handle alI SF ampersand H functions at a small spill or by many persons within each specialty for larger incidents

  18. Virtual rapid response: the next evolution of tele-ICU.

    Science.gov (United States)

    Hawkins, Carrie L

    2012-01-01

    The first of its kind in the Veterans Affairs (VA) system, the Denver VA Medical Center's tele-intensive care unit (ICU) program is unique because it is entirely nurse driven. A nontraditional tele-ICU model, the program was tailored to meet the needs of rural veterans by using critical care nursing expertise in Denver, Colorado. An experienced CCRN-certified nurse manages the system 24 hours a day, 7 days a week, from Eastern Colorado Health Care System. The virtual ICU provides rapid response interventions through virtual technology. This tele-ICU technology allows for a "virtual handshake" by nursing staff at the start of the shift and a report on potential patient issues. Clinical relationships have been strengthened between all 5 VA facilities in the Rocky Mountain Region, increasing the likelihood of early consultation at the onset of clinical decline of a patient. In addition, the tele-ICU nurse is available for immediate nursing consultation and support, coordinates point-to-point virtual consultation between physicians at the rural sites and specialists in Denver, and assists in expediting critical care transfers. The primary objectives for the tele-ICU program include improving quality and access of care to critical care services in rural sites, reducing community fee basis costs and frequency of transfers, and increasing collaboration and collegiality among nursing and medical staff in all Region 19's medical centers.

  19. The Simulation-Based Assessment of Pediatric Rapid Response Teams.

    Science.gov (United States)

    Fehr, James J; McBride, Mary E; Boulet, John R; Murray, David J

    2017-09-01

    To create scenarios of simulated decompensating pediatric patients to train pediatric rapid response teams (RRTs) and to determine whether the scenario scores provide a valid assessment of RRT performance with the hypothesis that RRTs led by intensivists-in-training would be better prepared to manage the scenarios than teams led by nurse practitioners. A set of 10 simulated scenarios was designed for the training and assessment of pediatric RRTs. Pediatric RRTs, comprising a pediatric intensive care unit (PICU) registered nurse and respiratory therapist, led by a PICU intensivist-in-training or a pediatric nurse practitioner, managed 7 simulated acutely decompensating patients. Two raters evaluated the scenario performances and psychometric analyses of the scenarios were performed. The teams readily managed scenarios such as supraventricular tachycardia and opioid overdose but had difficulty with more complicated scenarios such as aortic coarctation or head injury. The management of any particular scenario was reasonably predictive of overall team performance. The teams led by the PICU intensivists-in-training outperformed the teams led by the pediatric nurse practitioners. Simulation provides a method for RRTs to develop decision-making skills in managing decompensating pediatric patients. The multiple scenario assessment provided a moderately reliable team score. The greater scores achieved by PICU intensivist-in-training-led teams provides some evidence to support the validity of the assessment. Copyright © 2017 Elsevier Inc. All rights reserved.

  20. Spectrophotometric Rapid-Response Classification of Near-Earth Objects

    Science.gov (United States)

    Mommert, Michael; Trilling, David; Butler, Nat; Axelrod, Tim; Moskovitz, Nick; Jedicke, Robert; Pichardo, Barbara; Reyes-Ruiz, Mauricio

    2015-08-01

    Small NEOs are, as a whole, poorly characterized, and we know nothing about the physical properties of the majority of all NEOs. The rate of NEO discoveries is increasing each year, and projects to determine the physical properties of NEOs are lagging behind. NEOs are faint, and generally even fainter by the time that follow-up characterizations can be made days or weeks after their discovery. There is a need for a high-throughput, high-efficiency physical characterization strategy in which hundreds of faint NEOs can be characterized each year. Broadband photometry in the near-infrared is sufficiently diagnostic to assign taxonomic types, and hence constrain both the individual and ensemble properties of NEOs.We present results from our rapid response near-infrared spectrophotometric characterization program of NEOs. We are using UKIRT (on Mauna Kea) and the RATIR instrument on the 1.5m telescope at the San Pedro Martir Observatory (Mexico) to allow us to make observations most nights of the year in robotic/queue mode. We derive taxonomic classifications for our targets using machine-learning techniques that are trained on a large sample of measured asteroid spectra. For each target we assign a probability for it to belong to a number of different taxa. Target selection, observation, data reduction, and analysis are highly automated, requiring only a minimum of user interaction, making this technique powerful and fast. Our targets are NEOs that are generally too faint for other characterization techniques, or would require many hours of large telescope time.

  1. Stigma in Canada: Results From a Rapid Response Survey

    Science.gov (United States)

    Stuart, Heather; Patten, Scott B; Koller, Michelle; Modgill, Geeta; Liinamaa, Tiina

    2014-01-01

    Objective: Our paper presents findings from the first population survey of stigma in Canada using a new measure of stigma. Empirical objectives are to provide a descriptive profile of Canadian’s expectations that people will devalue and discriminate against someone with depression, and to explore the relation between experiences of being stigmatized in the year prior to the survey among people having been treated for a mental illness with a selected number of sociodemographic and mental health–related variables. Method: Data were collected by Statistics Canada using a rapid response format on a representative sample of Canadians (n = 10 389) during May and June of 2010. Public expectations of stigma and personal experiences of stigma in the subgroup receiving treatment for a mental illness were measured. Results: Over one-half of the sample endorsed 1 or more of the devaluation discrimination items, indicating that they believed Canadians would stigmatize someone with depression. The item most frequently endorsed concerned employers not considering an application from someone who has had depression. Over one-third of people who had received treatment in the year prior to the survey reported discrimination in 1 or more life domains. Experiences of discrimination were strongly associated with perceptions that Canadians would devalue someone with depression, younger age (12 to 15 years), and self-reported poor general mental health. Conclusions: The Mental Health Experiences Module reflects an important partnership between 2 national organizations that will help Canada fulfill its monitoring obligations under the United Nations Convention on the Rights of Persons with Disabilities and provide a legacy to researchers and policy-makers who are interested in monitoring changes in stigma over time. PMID:25565699

  2. Effectiveness Analysis of a Part-Time Rapid Response System During Operation Versus Nonoperation.

    Science.gov (United States)

    Kim, Youlim; Lee, Dong Seon; Min, Hyunju; Choi, Yun Young; Lee, Eun Young; Song, Inae; Park, Jong Sun; Cho, Young-Jae; Jo, You Hwan; Yoon, Ho Il; Lee, Jae Ho; Lee, Choon-Taek; Do, Sang Hwan; Lee, Yeon Joo

    2017-06-01

    To evaluate the effect of a part-time rapid response system on the occurrence rate of cardiopulmonary arrest by comparing the times of rapid response system operation versus nonoperation. Retrospective cohort study. A 1,360-bed tertiary care hospital. Adult patients admitted to the general ward were screened. Data were collected over 36 months from rapid response system implementation (October 2012 to September 2015) and more than 45 months before rapid response system implementation (January 2009 to September 2012). None. The rapid response system operates from 7 AM to 10 PM on weekdays and from 7 AM to 12 PM on Saturdays. Primary outcomes were the difference of cardiopulmonary arrest incidence between pre-rapid response system and post-rapid response system periods and whether the rapid response system operating time affects the cardiopulmonary arrest incidence. The overall cardiopulmonary arrest incidence (per 1,000 admissions) was 1.43. Although the number of admissions per month and case-mix index were increased (3,555.18 vs 4,564.72, p times (0.82 vs 0.49/1,000 admissions; p = 0.001) but remained similar during rapid response system nonoperating times (0.77 vs 0.73/1,000 admissions; p = 0.729). The implementation of a part-time rapid response system reduced the cardiopulmonary arrest incidence based on the reduction of cardiopulmonary arrest during rapid response system operating times. Further analysis of the cost effectiveness of part-time rapid response system is needed.

  3. Demand-side financing for maternal and newborn health: what do we know about factors that affect implementation of cash transfers and voucher programmes?

    Science.gov (United States)

    Hunter, Benjamin M; Murray, Susan F

    2017-08-31

    Demand-side financing (DSF) interventions, including cash transfers and vouchers, have been introduced to promote maternal and newborn health in a range of low- and middle-income countries. These interventions vary in design but have typically been used to increase health service utilisation by offsetting some financial costs for users, or increasing household income and incentivising 'healthy behaviours'. This article documents experiences and implementation factors associated with use of DSF in maternal and newborn health. A secondary analysis (using an adapted Supporting the Use of Research Evidence framework - SURE) was performed on studies that had previously been identified in a systematic review of evidence on DSF interventions in maternal and newborn health. The article draws on findings from 49 quantitative and 49 qualitative studies. The studies give insights on difficulties with exclusion of migrants, young and multiparous women, with demands for informal fees at facilities, and with challenges maintaining quality of care under increasing demand. Schemes experienced difficulties if communities faced long distances to reach participating facilities and poor access to transport, and where there was inadequate health infrastructure and human resources, shortages of medicines and problems with corruption. Studies that documented improved care-seeking indicated the importance of adequate programme scope (in terms of programme eligibility, size and timing of payments and voucher entitlements) to address the issue of concern, concurrent investments in supply-side capacity to sustain and/or improve quality of care, and awareness generation using community-based workers, leaders and women's groups. Evaluations spanning more than 15 years of implementation of DSF programmes reveal a complex picture of experiences that reflect the importance of financial and other social, geographical and health systems factors as barriers to accessing care. Careful design of DSF

  4. Coordinating Demand-Side Efficiency Evaluation, Measurement and Verification Among Western States: Options for Documenting Energy and Non-Energy Impacts for the Power Sector

    Energy Technology Data Exchange (ETDEWEB)

    Schiller, Steven R. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Schwartz, Lisa C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2016-06-22

    Demand-side energy efficiency (efficiency) represents a low-cost opportunity to reduce electricity consumption and demand and provide a wide range of non-energy benefits, including avoiding air pollution. Efficiency-related energy and non-energy impacts are determined and documented by implementing evaluation, measurement and verification (EM&V) systems. This technical brief describes efficiency EM&V coordination strategies that Western states can consider taking on together, outlines EM&V-related products that might be appropriate for multistate coordination, and identifies some implications of coordination. Coordinating efficiency EM&V activities can save both time and costs for state agencies and stakeholders engaged in efficiency activities and can be particularly beneficial for multiple states served by the same utility. First, the brief summarizes basic information on efficiency, its myriad potential benefits and EM&V for assessing those benefits. Second, the brief introduces the concept of multistate EM&V coordination in the context of assessing such benefits, including achievement of state and federal goals to reduce air pollutants.1 Next, the brief presents three coordination strategy options for efficiency EM&V: information clearinghouse/exchange, EM&V product development, and a regional energy efficiency tracking system platform. The brief then describes five regional EM&V products that could be developed on a multistate basis: EM&V reporting formats, database of consistent deemed electricity savings values, glossary of definitions and concepts, efficiency EM&V methodologies, and EM&V professional standards or accreditation processes. Finally, the brief discusses options for next steps that Western states can take to consider multistate coordination on efficiency EM&V. Appendices provide background information on efficiency and EM&V, as well as definitions and suggested resources on the covered topics. This brief is intended to inform state public

  5. Rapid Time Response: A solution for Manufacturing Issue

    Directory of Open Access Journals (Sweden)

    Norazlin N.

    2017-01-01

    Full Text Available Respond time in manufacturing give the major impact that able to contribute too many manufacturing issues. Based on two worst case scenario occurred where Toyota in 2009 made a massive vehicles call due to car complexity of 11 major models and over 9 million vehicles. The recalls cost at least $2 billion in cost of repair, lost deals and result in lost 5% of its market share in United State of America, while A380 was reported on missing target in new production and leads to delayed market entry due to their weak product life cycle management (PLM. These cases give a sign to all industries to possess and optimize the facilities for better traceability in shortest time period. In Industry 4.0, the traceability and time respond become the factors for high performance manufacturing and rapid time respond able to expedite the traceability process and strengthen the communication level between man, machine and management. The round trip time (RTT experiment gives variant time respond between two difference operating system for intra and inter-platform signal. If this rapid time respond is adopted in any manufacturing process, the delay in traceability on every issue that lead to losses can be successfully avoided.

  6. Robust Research and Rapid Response: The Plum Pox Virus Story

    Science.gov (United States)

    Alter, Theodore R.; Bridger, Jeffrey C.; Travis, James W.

    2004-01-01

    Universities are frequently criticized for being unresponsive to the needs of their stakeholders. In response to this perception, many institutions of higher learning have taken steps to become more productively engaged with the people, organizations, and communities they serve. In this article, we analyze the process of engagement by focusing on…

  7. Rapid Response Team activation for pediatric patients on the acute pain service.

    Science.gov (United States)

    Teets, Maxwell; Tumin, Dmitry; Walia, Hina; Stevens, Jenna; Wrona, Sharon; Martin, David; Bhalla, Tarun; Tobias, Joseph D

    2017-11-01

    Untreated pain or overly aggressive pain management may lead to adverse physiologic consequences and activation of the hospital's Rapid Response Team. This study is a quality improvement initiative that attempts to identify patient demographics and patterns associated with Rapid Response Team consultations for patients on the acute pain service. A retrospective review of all patients on the acute pain service from February 2011 until June 2015 was cross-referenced with inpatients requiring consultation from the Rapid Response Team. Two independent practitioners reviewed electronic medical records to determine which events were likely associated with pain management interventions. Over a 4-year period, 4872 patients were admitted to the acute pain service of whom 135 unique patients required Rapid Response Team consults. There were 159 unique Rapid Response Team activations among 6538 unique acute pain service consults. A subset of 27 pain management-related Rapid Response Team consultations was identified. The largest percentage of patients on the acute pain service were adolescents aged 12-17 (36%). Compared to this age group, the odds of Rapid Response Team activation were higher among infants Team consultations may help to identify patients at risk for clinical decompensation. © 2017 John Wiley & Sons Ltd.

  8. Automating Hyperspectral Data for Rapid Response in Volcanic Emergencies

    Science.gov (United States)

    Davies, Ashley G.; Doubleday, Joshua R.; Chien, Steve A.

    2013-01-01

    In a volcanic emergency, time is of the essence. It is vital to quantify eruption parameters (thermal emission, effusion rate, location of activity) and distribute this information as quickly as possible to decision-makers in order to enable effective evaluation of eruption-related risk and hazard. The goal of this work was to automate and streamline processing of spacecraft hyperspectral data, automate product generation, and automate distribution of products. Visible and Short-Wave Infrared Images of volcanic eruption in Iceland in May 2010." class="caption" align="right">The software rapidly processes hyperspectral data, correcting for incident sunlight where necessary, and atmospheric transmission; detects thermally anomalous pixels; fits data with model black-body thermal emission spectra to determine radiant flux; calculates atmospheric convection thermal removal; and then calculates total heat loss. From these results, an estimation of effusion rate is made. Maps are generated of thermal emission and location (see figure). Products are posted online, and relevant parties notified. Effusion rate data are added to historical record and plotted to identify spikes in activity for persistently active eruptions. The entire process from start to end is autonomous. Future spacecraft, especially those in deep space, can react to detection of transient processes without the need to communicate with Earth, thus increasing science return. Terrestrially, this removes the need for human intervention.

  9. Data bases for rapid response to power reactor problems

    International Nuclear Information System (INIS)

    Maskewitz, B.F.

    1980-01-01

    The urgency of the TMI-2 incident demanded prompt answers to an imperious situation. In responding to these challenging circumstances, both government and industry recognized deficiencies in both availability of essential retrievable data and calculational capabilities designed to respond immediately to actual abnormal events. Each responded by initiating new programs to provide a remedy for the deficiencies and to generally improve all safety measures in the nuclear power industry. Many data bases and information centers offer generic data and other technology resources which are generally useful in support of nuclear safety programs. A few centers can offer rapid access to calculational methods and associated data and more will make an effort to do so. As a beneficial spin-off from the lessons learned from TMI-2, more technical effort and financial resources will be devoted to the prevention of accidents, and to improvement of safety measures in the immediate future and for long term R and D programs by both government and the nuclear power industry

  10. Rapid Response Risk Assessment in New Project Development

    Science.gov (United States)

    Graber, Robert R.

    2010-01-01

    A capability for rapidly performing quantitative risk assessments has been developed by JSC Safety and Mission Assurance for use on project design trade studies early in the project life cycle, i.e., concept development through preliminary design phases. A risk assessment tool set has been developed consisting of interactive and integrated software modules that allow a user/project designer to assess the impact of alternative design or programmatic options on the probability of mission success or other risk metrics. The risk and design trade space includes interactive options for selecting parameters and/or metrics for numerous design characteristics including component reliability characteristics, functional redundancy levels, item or system technology readiness levels, and mission event characteristics. This capability is intended for use on any project or system development with a defined mission, and an example project will used for demonstration and descriptive purposes, e.g., landing a robot on the moon. The effects of various alternative design considerations and their impact of these decisions on mission success (or failure) can be measured in real time on a personal computer. This capability provides a high degree of efficiency for quickly providing information in NASA s evolving risk-based decision environment

  11. Dissociation of rapid response learning and facilitation in perceptual and conceptual networks of person recognition.

    Science.gov (United States)

    Valt, Christian; Klein, Christoph; Boehm, Stephan G

    2015-08-01

    Repetition priming is a prominent example of non-declarative memory, and it increases the accuracy and speed of responses to repeatedly processed stimuli. Major long-hold memory theories posit that repetition priming results from facilitation within perceptual and conceptual networks for stimulus recognition and categorization. Stimuli can also be bound to particular responses, and it has recently been suggested that this rapid response learning, not network facilitation, provides a sound theory of priming of object recognition. Here, we addressed the relevance of network facilitation and rapid response learning for priming of person recognition with a view to advance general theories of priming. In four experiments, participants performed conceptual decisions like occupation or nationality judgments for famous faces. The magnitude of rapid response learning varied across experiments, and rapid response learning co-occurred and interacted with facilitation in perceptual and conceptual networks. These findings indicate that rapid response learning and facilitation in perceptual and conceptual networks are complementary rather than competing theories of priming. Thus, future memory theories need to incorporate both rapid response learning and network facilitation as individual facets of priming. © 2014 The British Psychological Society.

  12. Rapid adaptive responses to climate change in corals

    KAUST Repository

    Torda, Gergely; Donelson, Jennifer M.; Aranda, Manuel; Barshis, Daniel J.; Bay, Line; Berumen, Michael L.; Bourne, David G.; Cantin, Neal; Foret, Sylvain; Matz, Mikhail; Miller, David J.; Moya, Aurelie; Putnam, Hollie M.; Ravasi, Timothy; van Oppen, Madeleine J. H.; Thurber, Rebecca Vega; Vidal-Dupiol, Jeremie; Voolstra, Christian R.; Watson, Sue-Ann; Whitelaw, Emma; Willis, Bette L.; Munday, Philip L.

    2017-01-01

    Pivotal to projecting the fate of coral reefs is the capacity of reef-building corals to acclimatize and adapt to climate change. Transgenerational plasticity may enable some marine organisms to acclimatize over several generations and it has been hypothesized that epigenetic processes and microbial associations might facilitate adaptive responses. However, current evidence is equivocal and understanding of the underlying processes is limited. Here, we discuss prospects for observing transgenerational plasticity in corals and the mechanisms that could enable adaptive plasticity in the coral holobiont, including the potential role of epigenetics and coral-associated microbes. Well-designed and strictly controlled experiments are needed to distinguish transgenerational plasticity from other forms of plasticity, and to elucidate the underlying mechanisms and their relative importance compared with genetic adaptation.

  13. Rapid adaptive responses to climate change in corals

    KAUST Repository

    Torda, Gergely

    2017-09-01

    Pivotal to projecting the fate of coral reefs is the capacity of reef-building corals to acclimatize and adapt to climate change. Transgenerational plasticity may enable some marine organisms to acclimatize over several generations and it has been hypothesized that epigenetic processes and microbial associations might facilitate adaptive responses. However, current evidence is equivocal and understanding of the underlying processes is limited. Here, we discuss prospects for observing transgenerational plasticity in corals and the mechanisms that could enable adaptive plasticity in the coral holobiont, including the potential role of epigenetics and coral-associated microbes. Well-designed and strictly controlled experiments are needed to distinguish transgenerational plasticity from other forms of plasticity, and to elucidate the underlying mechanisms and their relative importance compared with genetic adaptation.

  14. Rapid behavioral and genomic responses to social opportunity.

    Directory of Open Access Journals (Sweden)

    Sabrina S Burmeister

    2005-11-01

    Full Text Available From primates to bees, social status regulates reproduction. In the cichlid fish Astatotilapia (Haplochromis burtoni, subordinate males have reduced fertility and must become dominant to reproduce. This increase in sexual capacity is orchestrated by neurons in the preoptic area, which enlarge in response to dominance and increase expression of gonadotropin-releasing hormone 1 (GnRH1, a peptide critical for reproduction. Using a novel behavioral paradigm, we show for the first time that subordinate males can become dominant within minutes of an opportunity to do so, displaying dramatic changes in body coloration and behavior. We also found that social opportunity induced expression of the immediate-early gene egr-1 in the anterior preoptic area, peaking in regions with high densities of GnRH1 neurons, and not in brain regions that express the related peptides GnRH2 and GnRH3. This genomic response did not occur in stable subordinate or stable dominant males even though stable dominants, like ascending males, displayed dominance behaviors. Moreover, egr-1 in the optic tectum and the cerebellum was similarly induced in all experimental groups, showing that egr-1 induction in the anterior preoptic area of ascending males was specific to this brain region. Because egr-1 codes for a transcription factor important in neural plasticity, induction of egr-1 in the anterior preoptic area by social opportunity could be an early trigger in the molecular cascade that culminates in enhanced fertility and other long-term physiological changes associated with dominance.

  15. Long-term culture change related to rapid response system implementation.

    Science.gov (United States)

    Stevens, Jennifer; Johansson, Anna; Lennes, Inga; Hsu, Douglas; Tess, Anjala; Howell, Michael

    2014-12-01

    Increasing attention to patient safety in training hospitals may come at the expense of trainee autonomy and professional growth. This study sought to examine changes in medical trainees' self-reported behaviour after the institution-wide implementation of a rapid response system. We conducted a two-point cross-sectional survey of medical trainees in 2006, during the implementation of a rapid response system, and in 2010, in a single academic medical centre. A novel instrument was used to measure trainee likelihood of calling for supervisory assistance, perception of autonomy, and comfort in managing decompensating patients. Non-parametric tests to assess for change were used and year of training was evaluated as an effect modifier. Response rates were 38% in 2006 and 70% in 2010. After 5 years of the full implementation of the rapid response system, residents were significantly more likely to report calling their attending physicians for assistance (rising from 40% to 65% of relevant situations; p autonomy at 5 years after the implementation of the rapid response system. These changes were mirrored in the actual use of the rapid response system, which increased by 41% during the 5-year period after adjustment for patient volume (p < 0.0001). A primary team-focused implementation of a rapid response system was associated with durable changes in resident physicians' reported behaviour, including increased comfort with involving more experienced physicians and managing unstable patients. © 2014 John Wiley & Sons Ltd.

  16. Rapid IV Versus Oral Rehydration: Responses to Subsequent Exercise Heat Stress

    National Research Council Canada - National Science Library

    Kenefick, Robert W; O'Moore, Kathleen M; Mahood, Nicholas V; Castellani, John W

    2006-01-01

    This study sought to determine the effect of rapid intravenous (IV) versus oral (ORAL) rehydration immediately after dehydration, on cardiovascular, thermoregulatory, and perceptual responses during subsequent exercise in the heat.

  17. Non-Critical-Care Nurses' Perceptions of Facilitators and Barriers to Rapid Response Team Activation.

    Science.gov (United States)

    Jenkins, Sheryl Henry; Astroth, Kim Schafer; Woith, Wendy Mann

    2015-01-01

    Rapid response teams can save lives but are only effective when activated. We surveyed 50 nurses for their perceptions of facilitators and barriers to activation. Findings showed that participants need more education on their role and when to activate the rapid response team. Nurses who comprise the team need help building their communication skills. We recommend nursing professional development specialists increase the frequency of offerings and expand the focus on roles, activation criteria, and communication skills.

  18. Hyperspectral Cubesat Constellation for Rapid Natural Hazard Response

    Science.gov (United States)

    Mandl, D.; Huemmrich, K. F.; Ly, V. T.; Handy, M.; Ong, L.; Crum, G.

    2015-12-01

    With the advent of high performance space networks that provide total coverage for Cubesats, the paradigm for low cost, high temporal coverage with hyperspectral instruments becomes more feasible. The combination of ground cloud computing resources, high performance with low power consumption onboard processing, total coverage for the cubesats and social media provide an opprotunity for an architecture that provides cost-effective hyperspectral data products for natural hazard response and decision support. This paper provides a series of pathfinder efforts to create a scalable Intelligent Payload Module(IPM) that has flown on a variety of airborne vehicles including Cessna airplanes, Citation jets and a helicopter and will fly on an Unmanned Aerial System (UAS) hexacopter to monitor natural phenomena. The IPM's developed thus far were developed on platforms that emulate a satellite environment which use real satellite flight software, real ground software. In addition, science processing software has been developed that perform hyperspectral processing onboard using various parallel processing techniques to enable creation of onboard hyperspectral data products while consuming low power. A cubesat design was developed that is low cost and that is scalable to larger consteallations and thus can provide daily hyperspectral observations for any spot on earth. The design was based on the existing IPM prototypes and metrics that were developed over the past few years and a shrunken IPM that can perform up to 800 Mbps throughput. Thus this constellation of hyperspectral cubesats could be constantly monitoring spectra with spectral angle mappers after Level 0, Level 1 Radiometric Correction, Atmospheric Correction processing. This provides the opportunity daily monitoring of any spot on earth on a daily basis at 30 meter resolution which is not available today.

  19. Hawaii demand-side management resource assessment. Final report, Reference Volume 3 -- Residential and commercial sector DSM analyses: Detailed results from the DBEDT DSM assessment model; Part 1, Technical potential

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    The Hawaii Demand-Side Management Resource Assessment was the fourth of seven projects in the Hawaii Energy Strategy (HES) program. HES was designed by the Department of Business, Economic Development, and Tourism (DBEDT) to produce an integrated energy strategy for the State of Hawaii. The purpose of Project 4 was to develop a comprehensive assessment of Hawaii`s demand-side management (DSM) resources. To meet this objective, the project was divided into two phases. The first phase included development of a DSM technology database and the identification of Hawaii commercial building characteristics through on-site audits. These Phase 1 products were then used in Phase 2 to identify expected energy impacts from DSM measures in typical residential and commercial buildings in Hawaii. The building energy simulation model DOE-2.1E was utilized to identify the DSM energy impacts. More detailed information on the typical buildings and the DOE-2.1E modeling effort is available in Reference Volume 1, ``Building Prototype Analysis``. In addition to the DOE-2.1E analysis, estimates of residential and commercial sector gas and electric DSM potential for the four counties of Honolulu, Hawaii, Maui, and Kauai through 2014 were forecasted by the new DBEDT DSM Assessment Model. Results from DBEDTs energy forecasting model, ENERGY 2020, were linked with results from DOE-2.1E building energy simulation runs and estimates of DSM measure impacts, costs, lifetime, and anticipated market penetration rates in the DBEDT DSM Model. Through its algorithms, estimates of DSM potential for each forecast year were developed. Using the load shape information from the DOE-2.1E simulation runs, estimates of electric peak demand impacts were developed. Numerous tables and figures illustrating the technical potential for demand-side management are included.

  20. 77 FR 35962 - Utilizing Rapidly Deployable Aerial Communications Architecture in Response to an Emergency

    Science.gov (United States)

    2012-06-15

    ... Aerial Communications Architecture in Response to an Emergency AGENCY: Federal Communications Commission... deployable aerial communications architecture (DACA) in facilitating emergency response by rapidly restoring... copying during normal business hours in the FCC Reference Information Center, Portals II, 445 12th Street...

  1. Rapid response of a hydrologic system to volcanic activity: Masaya volcano, Nicaragua

    Science.gov (United States)

    Pearson, S.C.P.; Connor, C.B.; Sanford, W.E.

    2008-01-01

    Hydrologic systems change in response to volcanic activity, and in turn may be sensitive indicators of volcanic activity. Here we investigate the coupled nature of magmatic and hydrologic systems using continuous multichannel time series of soil temperature collected on the flanks of Masaya volcano, Nicaragua, one of the most active volcanoes in Central America. The soil temperatures were measured in a low-temperature fumarole field located 3.5 km down the flanks of the volcano. Analysis of these time series reveals that they respond extremely rapidly, on a time scale of minutes, to changes in volcanic activity also manifested at the summit vent. These rapid temperature changes are caused by increased flow of water vapor through flank fumaroles during volcanism. The soil temperature response, ~5 °C, is repetitive and complex, with as many as 13 pulses during a single volcanic episode. Analysis of the frequency spectrum of these temperature time series shows that these anomalies are characterized by broad frequency content during volcanic activity. They are thus easily distinguished from seasonal trends, diurnal variations, or individual rainfall events, which triggered rapid transient increases in temperature during 5% of events. We suggest that the mechanism responsible for the distinctive temperature signals is rapid change in pore pressure in response to magmatism, a response that can be enhanced by meteoric water infiltration. Monitoring of distal fumaroles can therefore provide insight into coupled volcanic-hydrologic-meteorologic systems, and has potential as an inexpensive monitoring tool.

  2. Irradiation response of rapidly solidified Path A type prime candidate alloys

    International Nuclear Information System (INIS)

    Imeson, E.; Tong, C.; Lee, M.; Vander Sande, J.B.; Harling, O.K.

    1981-01-01

    The objective of this study is to present a first assessment of the microstructural response to neutron irradiation shown by Path A alloys prepared by rapid solidification processing. To more fully demonstrate the potential of the method, alloys with increased titanium and carbon content have been used in addition to the Path A prime candidate alloy

  3. Early Detection Rapid Response Program Targets New Noxious Weed Species in Washington State

    Science.gov (United States)

    Andreas, Jennifer E.; Halpern, Alison D.; DesCamp, Wendy C.; Miller, Timothy W.

    2015-01-01

    Early detection, rapid response is a critical component of invasive plant management. It can be challenging, however, to detect new invaders before they become established if landowners cannot identify species of concern. In order to increase awareness, eye-catching postcards were developed in Washington State as part of a noxious weed educational…

  4. Essays on measurement and evaluation of demand side management programs in the electricity industry, and impacts of firm strategy on stock price in the biotechnology industry

    Science.gov (United States)

    Bandres Motola, Miguel A.

    Essay one estimates changes in small business customer energy consumption (kWh) patterns resulting from a seasonally differentiated pricing structure. Econometric analysis leverages cross-sectional time series data across the entire population of affected customers, from 2007 through the present. Observations include: monthly energy usage (kWh), relevant customer segmentations, local daily temperature, energy price, and region-specific economic conditions, among other variables. The study identifies the determinants of responsiveness to seasonal price differentiation. In addition, estimated energy consumption changes occurring during the 2010 summer season are reported for the average customer and in aggregate grouped by relevant customer segments, climate zone, and total customer base. Essay two develops an econometric modeling methodology to evaluate load impacts for short duration demand response events. The study analyzes time series data from a season of direct load control program tests aimed at integrating demand response into the wholesale electricity market. I have combined "fuzzy logic" with binary variables to create "fuzzy indicator variables" that allow for measurement of short duration events while using industry standard model specifications. Typically, binary variables for every hour are applied in load impact analysis of programs dispatched in hourly intervals. As programs evolve towards integration with the wholesale market, event durations become irregular and often occur for periods of only a few minutes. This methodology is innovative in that it conserves the degrees of freedom in the model while allowing for analysis of high frequency data using fixed effects. Essay three examines the effects of strategies, intangibles, and FDA news on the stocks of young biopharmaceutical firms. An event study methodology is used to explore those effects. This study investigates 20,839 announcements from 1990 to 2005. Announcements on drug development

  5. Response selection difficulty modulates the behavioral impact of rapidly learnt action effects.

    Directory of Open Access Journals (Sweden)

    Uta eWolfensteller

    2014-12-01

    Full Text Available It is well established that we can pick up action effect associations when acting in a free-choice intentional mode. However, it is less clear whether and when action effect associations are learnt and actually affect behavior if we are acting in a forced-choice mode, applying a specific stimulus-response (S-R rule. In the present study, we investigated whether response selection difficulty imposed by S-R rules influences the initial rapid learning and the behavioral expression of previously learnt but weakly practiced action effect associations when those are re-activated by effect exposure. Experiment 1 showed that the rapid acquisition of action effect associations is not directly influenced by response selection difficulty. By contrast, the behavioral expression of re-activated action effect associations is prevented when actions are directly activated by highly over-learnt response cues and thus response selection difficulty is low. However, all three experiments showed that if response selection difficulty is sufficiently high during re-activation, the same action effect associations do influence behavior. Experiment 2 and 3 revealed that the effect of response selection difficulty cannot be fully reduced to giving action effects more time to prime an action, but seems to reflect competition during response selection. Finally, the present data suggest that when multiple novel rules are rapidly learnt in succession, which requires a lot of flexibility, action effect associations continue to influence behavior only if response selection difficulty is sufficiently high. Thus, response selection difficulty might modulate the impact of experiencing multiple learning episodes on action effect expression and learning, possibly via inducing different strategies.

  6. A nationwide web-based automated system for early outbreak detection and rapid response in China

    Directory of Open Access Journals (Sweden)

    Yilan Liao

    2011-03-01

    Full Text Available Timely reporting, effective analyses and rapid distribution of surveillance data can assist in detecting the aberration of disease occurrence and further facilitate a timely response. In China, a new nationwide web-based automated system for outbreak detection and rapid response was developed in 2008. The China Infectious Disease Automated-alert and Response System (CIDARS was developed by the Chinese Center for Disease Control and Prevention based on the surveillance data from the existing electronic National Notifiable Infectious Diseases Reporting Information System (NIDRIS started in 2004. NIDRIS greatly improved the timeliness and completeness of data reporting with real time reporting information via the Internet. CIDARS further facilitates the data analysis, aberration detection, signal dissemination, signal response and information communication needed by public health departments across the country. In CIDARS, three aberration detection methods are used to detect the unusual occurrence of 28 notifiable infectious diseases at the county level and to transmit that information either in real-time or on a daily basis. The Internet, computers and mobile phones are used to accomplish rapid signal generation and dissemination, timely reporting and reviewing of the signal response results. CIDARS has been used nationwide since 2008; all Centers for Disease Control and Prevention (CDC in China at the county, prefecture, provincial and national levels are involved in the system. It assists with early outbreak detection at the local level and prompts reporting of unusual disease occurrences or potential outbreaks to CDCs throughout the country.

  7. Linking promotion strategies for RES-E and for demand-side conservation in a dynamic European electricity market: Lessons from the EU projects OPTRES, FORRES and GREEN-X. Volume 1

    International Nuclear Information System (INIS)

    Faber, Thomas; Resch, Gustav; Haas, Reinhard; Huber, Claus; Ragwitz, Mario

    2007-01-01

    The objective of this paper is to describe the derivation of least-cost strategies for an significant increase of electricity generation from renewables (RES-E) with minimal costs for European citizens and to investigate the role of accompanying demand-side conservation (DSC) activities. The analyses are conducted by using the model GREEN-X funded by the EC. It allows analyses for both, the EU as a whole as well as for every single member state. Within the model the most important RES-E (e.g. biomass, wind-onshore and off-shore, geothermal, PV, solar thermal ...) technologies are described for every EU-15 country by means of dynamic cost-resource curves. Demand-side conservation measures are considered by aggregated cost-resource curves. To analyse various scenarios different policy schemes can be selected, (e.g. feed-in tariffs, tendering systems, investment subsidies, tax incentives, quotas, tradable certificates) and modelled in a dynamic framework. The corresponding costs and benefits for companies and consumers are an output.The major result is that DSC plays an important role for increasing the share of RES-E. E.g. the same deployment of RES in a conservation scenario leads to 28 % of RES-E by 2020 while in the BAU-scenario this share is only 20 %. Moreover, a certain quota of RES - e.g. 20 % - can be reached much cheaper if a certain share of money is invested in DSC. The core conclusion of this analysis is: On EU level it is of superior importance to introduce integrated policies - policies focusing on the promotion of RES and on energy conservation simultaneously - to reap the utmost benefits from public money invested

  8. A method for the rapid generation of nonsequential light-response curves of chlorophyll fluorescence.

    Science.gov (United States)

    Serôdio, João; Ezequiel, João; Frommlet, Jörg; Laviale, Martin; Lavaud, Johann

    2013-11-01

    Light-response curves (LCs) of chlorophyll fluorescence are widely used in plant physiology. Most commonly, LCs are generated sequentially, exposing the same sample to a sequence of distinct actinic light intensities. These measurements are not independent, as the response to each new light level is affected by the light exposure history experienced during previous steps of the LC, an issue particularly relevant in the case of the popular rapid light curves. In this work, we demonstrate the proof of concept of a new method for the rapid generation of LCs from nonsequential, temporally independent fluorescence measurements. The method is based on the combined use of sample illumination with digitally controlled, spatially separated beams of actinic light and a fluorescence imaging system. It allows the generation of a whole LC, including a large number of actinic light steps and adequate replication, within the time required for a single measurement (and therefore named "single-pulse light curve"). This method is illustrated for the generation of LCs of photosystem II quantum yield, relative electron transport rate, and nonphotochemical quenching on intact plant leaves exhibiting distinct light responses. This approach makes it also possible to easily characterize the integrated dynamic light response of a sample by combining the measurement of LCs (actinic light intensity is varied while measuring time is fixed) with induction/relaxation kinetics (actinic light intensity is fixed and the response is followed over time), describing both how the response to light varies with time and how the response kinetics varies with light intensity.

  9. Early warning systems and rapid response to the deteriorating patient in hospital: A realist evaluation.

    Science.gov (United States)

    McGaughey, Jennifer; O'Halloran, Peter; Porter, Sam; Trinder, John; Blackwood, Bronagh

    2017-12-01

    To test the Rapid Response Systems programme theory against actual practice components of the Rapid Response Systems implemented to identify those contexts and mechanisms which have an impact on the successful achievement of desired outcomes in practice. Rapid Response Systems allow deteriorating patients to be recognized using Early Warning Systems, referred early via escalation protocols and managed at the bedside by competent staff. Realist evaluation. The research design was an embedded multiple case study approach of four wards in two hospitals in Northern Ireland which followed the principles of Realist Evaluation. We used various mixed methods including individual and focus group interviews, observation of nursing practice between June-November 2010 and document analysis of Early Warning Systems audit data between May-October 2010 and hospital acute care training records over 4.5 years from 2003-2008. Data were analysed using NiVivo8 and SPPS. A cross-case analysis highlighted similar patterns of factors which enabled or constrained successful recognition, referral and response to deteriorating patients in practice. Key enabling factors were the use of clinical judgement by experienced nurses and the empowerment of nurses as a result of organizational change associated with implementation of Early Warning System protocols. Key constraining factors were low staffing and inappropriate skill mix levels, rigid implementation of protocols and culturally embedded suboptimal communication processes. Successful implementation of Rapid Response Systems was dependent on adopting organizational and cultural changes that facilitated staff empowerment, flexible implementation of protocols and ongoing experiential learning. © 2017 John Wiley & Sons Ltd.

  10. A rapid challenge protocol for determination of non-specific bronchial responsiveness

    DEFF Research Database (Denmark)

    Madsen, F; Nielsen, N H; Holstein-Rathlou, N H

    1986-01-01

    A rapid method for determination of non-specific bronchial hyperreactivity was developed. Resistance to breathing was determined by a modified expiratory airway interrupter technique and combined with a dosimeter-controlled nebulizer which made continuous determination of response possible during...... hyperreactivity since individual dose titration is easily performed, and the method could be valuable in epidemiological and occupational surveys as well.......A rapid method for determination of non-specific bronchial hyperreactivity was developed. Resistance to breathing was determined by a modified expiratory airway interrupter technique and combined with a dosimeter-controlled nebulizer which made continuous determination of response possible during...... challenge. The patients inhaled histamine chloride 8 mg/ml at every eighth breath until resistance to breathing (Rt) was increased by 60%. The number of inhalations (NI) or the provocative concentration (PC60-Rt) of histamine increasing Rt by 60% were determined in 68 patients. The new method correlated...

  11. Demand side management of electric car charging

    DEFF Research Database (Denmark)

    Finn, P.; Fitzpatrick, C.; Connolly, David

    2012-01-01

    the purchase of alternative energy vehicles in an effort to achieve 10% EV (electric vehicle) penetration in the country's road fleet by 2020. The replacement of ICE (internal combustion engine) vehicles with EV equivalents poses challenges for grid operators while simultaneously offering opportunities...

  12. Demand Side Management in the Smart Grid

    DEFF Research Database (Denmark)

    Costanzo, Giuseppe Tommaso

    . Therefore it does not guarantee optimality in the long run. Two approaches are investigated within predictive control: the first is based on grey-box modelling and quadratic Model Predictive Control (MPC), while the second is based on Artificial Intelligence modelling and gradient-free optimisation......, together with the growing urbanisation, the in- creasing popularity of electricity-based climate control systems and electricity-based private transportation, challenges the distribution systems operators to run the low voltage grids with small safety margins. Depending on the customer and the specific...

  13. Demand side management for smart district heating

    DEFF Research Database (Denmark)

    Big, Oovidiu; Li, Hongwei; Svendsen, Svend

    2016-01-01

    between 25% and 35%. By making the light renovation, the heating system needs a minimum supply water temperature of 58ºC in order to cover the thermal comfort. Through extensive renovation, the supply water temperature could be reduced to 50ºC which makes it possible to transform the District Heating...... Temperature into Low Temperature. The building time constant for the extensive renovation is 86 hours which is double than a light building renovation and 53 hours higher than a non-renovated building. In the end of the paper is developed a formula which has the purpose to validate the results of virtual...... simulations. The relative percentage difference between the theoretical calculation and the virtual simulation results are between 2.5% and 17.5%....

  14. Rapid continental-scale vegetation response to the Younger Dryas Cool Episode

    Science.gov (United States)

    Peros, M.; Gajewski, K.; Viau, A.

    2006-12-01

    The Younger Dryas Cool Episode had rapid and widespread effects on flora and fauna throughout the Americas. Fossil pollen records document how plant communities responded to this event, although such data are generally only representative of changes at local- to regional-scales. We use a new approach to provide insight into vegetation responses to the Younger Dryas at a continental-scale, by focusing on data extracted for a single taxon (Populus poplar, cottonwood, aspen) from pollen diagrams throughout North America. We show that Populus underwent a rapid and continent-wide decline as the climate rapidly cooled and dried. At the termination of the Younger Dryas, Populus underwent another widespread decline, this time in response to competition from boreal and temperate taxa as the climate abruptly warmed. Late glacial-early Holocene pollen assemblages with high quantities of Populus pollen often lack modern analogues and thus confound quantitative paleoclimatic reconstructions; our results provide a context to interpret these assemblages. Furthermore, while Populus may continue to expand in the future in response to human disturbance and increasing temperatures, its sensitivity to competition may eventually put it at risk as global warming accelerates.

  15. In vivo relevance for photoprotection by the vitamin D rapid response pathway.

    Science.gov (United States)

    Dixon, K M; Deo, S S; Norman, A W; Bishop, J E; Halliday, G M; Reeve, V E; Mason, R S

    2007-03-01

    Vitamin D is produced by exposure of 7-dehydrocholesterol in the skin to UV irradiation (UVR) and further converted in the skin to the biologically active metabolite, 1,25-dihydroxyvitamin D(3) (1,25(OH)(2)D(3)) and other compounds. UVR also results in DNA damage producing cyclobutane pyrimidine dimers (CPD). We previously reported that 1,25(OH)(2)D(3) at picomolar concentrations, protects human skin cells from UVR-induced apoptosis, and decreases CPD in surviving cells. 1,25(OH)(2)D(3) has been shown to generate biological responses via two pathways-the classical steroid receptor/genomic pathway or a rapid, non-genomic pathway mediated by a putative membrane receptor. Whether the rapid response pathway is physiologically relevant is unclear. A cis-locked, rapid-acting agonist 1,25(OH)(2)lumisterol(3) (JN), entirely mimicked the actions of 1,25(OH)(2)D(3) to reduce fibroblast and keratinocyte loss and CPD damage after UVR. The effects of 1,25(OH)(2)D(3) were abolished by a rapid-acting antagonist, but not by a genomic antagonist. Skh:hr1 mice exposed to three times the minimal erythemal dose of solar-simulated UVR and treated topically with 1,25(OH)(2)D(3) or JN immediately after UVR showed reduction in UVR-induced UVR-induced sunburn cells (pphotoprotective effects via the rapid pathway and raise the possibility that other D compounds produced in skin may contribute to the photoprotective effects.

  16. E-DECIDER Rapid Response to the M 6.0 South Napa Earthquake

    Science.gov (United States)

    Glasscoe, M. T.; Parker, J. W.; Pierce, M. E.; Wang, J.; Eguchi, R. T.; Huyck, C. K.; Hu, Z.; Chen, Z.; Yoder, M. R.; Rundle, J. B.; Rosinski, A.

    2014-12-01

    E-DECIDER initiated rapid response mode when the California Earthquake Clearinghouse was activated the morning following the M6 Napa earthquake. Data products, including: 1) rapid damage and loss estimates, 2) deformation magnitude and slope change maps, and 3) aftershock forecasts were provided to the Clearinghouse partners within 24 hours of the event via XchangeCore Web Service Data Orchestration sharing. NASA data products were provided to end-users via XchangeCore, EERI and Clearinghouse websites, and ArcGIS online for Napa response, reaching a wide response audience. The E-DECIDER team helped facilitate rapid delivery of NASA products to stakeholders and participated in Clearinghouse Napa earthquake briefings to update stakeholders on product information. Rapid response products from E-DECIDER can be used to help prioritize response efforts shortly after the event has occurred. InLET (Internet Loss Estimation Tool) post-event damage and casualty estimates were generated quickly after the Napa earthquake. InLET provides immediate post-event estimates of casualties and building damage by performing loss/impact simulations using USGS ground motion data and FEMA HAZUS damage estimation technology. These results were provided to E-DECIDER by their collaborators, ImageCat, Inc. and the Community Stakeholder Network (CSN). Strain magnitude and slope change maps were automatically generated when the Napa earthquake appeared on the USGS feed. These maps provide an early estimate of where the deformation has occurred and where damage may be localized. Using E-DECIDER critical infrastructure overlays with damage estimates, decision makers can direct response effort that can be verified later with field reconnaissance and remote sensing-based observations. Earthquake aftershock forecast maps were produced within hours of the event. These maps highlight areas where aftershocks are likely to occur and can also be coupled with infrastructure overlays to help direct response

  17. Characterization of the rapid transcriptional response to long-term sensitization training in Aplysia californica.

    Science.gov (United States)

    Herdegen, Samantha; Holmes, Geraldine; Cyriac, Ashly; Calin-Jageman, Irina E; Calin-Jageman, Robert J

    2014-12-01

    We used a custom-designed microarray and quantitative PCR to characterize the rapid transcriptional response to long-term sensitization training in the marine mollusk Aplysia californica. Aplysia were exposed to repeated noxious shocks to one side of the body, a procedure known to induce a long-lasting, transcription-dependent increase in reflex responsiveness that is restricted to the side of training. One hour after training, pleural ganglia from the trained and untrained sides of the body were harvested; these ganglia contain the sensory nociceptors which help mediate the expression of long-term sensitization memory. Microarray analysis from 8 biological replicates suggests that long-term sensitization training rapidly regulates at least 81 transcripts. We used qPCR to test a subset of these transcripts and found that 83% were confirmed in the same samples, and 86% of these were again confirmed in an independent sample. Thus, our new microarray design shows strong convergent and predictive validity for analyzing the transcriptional correlates of memory in Aplysia. Fully validated transcripts include some previously identified as regulated in this paradigm (ApC/EBP and ApEgr) but also include novel findings. Specifically, we show that long-term sensitization training rapidly up-regulates the expression of transcripts which may encode Aplysia homologs of a C/EBPγ transcription factor, a glycine transporter (GlyT2), and a vacuolar-protein-sorting-associated protein (VPS36). Copyright © 2014 Elsevier Inc. All rights reserved.

  18. Rapid response to Ebola outbreaks in remote areas - Liberia, July-November 2014.

    Science.gov (United States)

    Kateh, Francis; Nagbe, Thomas; Kieta, Abraham; Barskey, Albert; Gasasira, Alex Ntale; Driscoll, Anne; Tucker, Anthony; Christie, Athalia; Karmo, Ben; Scott, Colleen; Bowah, Collin; Barradas, Danielle; Blackley, David; Dweh, Emmanuel; Warren, Felicia; Mahoney, Frank; Kassay, Gabriel; Calvert, Geoffrey M; Castro, Georgina; Logan, Gorbee; Appiah, Grace; Kirking, Hannah; Koon, Hawa; Papowitz, Heather; Walke, Henry; Cole, Isaac B; Montgomery, Joel; Neatherlin, John; Tappero, Jordan W; Hagan, Jose E; Forrester, Joseph; Woodring, Joseph; Mott, Joshua; Attfield, Kathleen; DeCock, Kevin; Lindblade, Kim A; Powell, Krista; Yeoman, Kristin; Adams, Laura; Broyles, Laura N; Slutsker, Laurence; Larway, Lawrence; Belcher, Lisa; Cooper, Lorraine; Santos, Marjorie; Westercamp, Matthew; Weinberg, Meghan Pearce; Massoudi, Mehran; Dea, Monica; Patel, Monita; Hennessey, Morgan; Fomba, Moses; Lubogo, Mutaawe; Maxwell, Nikki; Moonan, Patrick; Arzoaquoi, Sampson; Gee, Samuel; Zayzay, Samuel; Pillai, Satish; Williams, Seymour; Zarecki, Shauna Mettee; Yett, Sheldon; James, Stephen; Grube, Steven; Gupta, Sundeep; Nelson, Thelma; Malibiche, Theophil; Frank, Wilmont; Smith, Wilmot; Nyenswah, Tolbert

    2015-02-27

    West Africa is experiencing its first epidemic of Ebola virus disease (Ebola). As of February 9, Liberia has reported 8,864 Ebola cases, of which 3,147 were laboratory-confirmed. Beginning in August 2014, the Liberia Ministry of Health and Social Welfare (MOHSW), supported by CDC, the World Health Organization (WHO), and others, began systematically investigating and responding to Ebola outbreaks in remote areas. Because many of these areas lacked mobile telephone service, easy road access, and basic infrastructure, flexible and targeted interventions often were required. Development of a national strategy for the Rapid Isolation and Treatment of Ebola (RITE) began in early October. The strategy focuses on enhancing capacity of county health teams (CHT) to investigate outbreaks in remote areas and lead tailored responses through effective and efficient coordination of technical and operational assistance from the MOHSW central level and international partners. To measure improvements in response indicators and outcomes over time, data from investigations of 12 of 15 outbreaks in remote areas with illness onset dates of index cases during July 16-November 20, 2014, were analyzed. The times to initial outbreak alerts and durations of the outbreaks declined over that period while the proportions of patients who were isolated and treated increased. At the same time, the case-fatality rate in each outbreak declined. Implementation of strategies, such as RITE, to rapidly respond to rural outbreaks of Ebola through coordinated and tailored responses can successfully reduce transmission and improve outcomes.

  19. Glyphosate resistance in Ambrosia trifida: Part 1. Novel rapid cell death response to glyphosate.

    Science.gov (United States)

    Van Horn, Christopher R; Moretti, Marcelo L; Robertson, Renae R; Segobye, Kabelo; Weller, Stephen C; Young, Bryan G; Johnson, William G; Schulz, Burkhard; Green, Amanda C; Jeffery, Taylor; Lespérance, Mackenzie A; Tardif, François J; Sikkema, Peter H; Hall, J Christopher; McLean, Michael D; Lawton, Mark B; Sammons, R Douglas; Wang, Dafu; Westra, Philip; Gaines, Todd A

    2018-05-01

    Glyphosate-resistant (GR) Ambrosia trifida is now present in the midwestern United States and in southwestern Ontario, Canada. Two distinct GR phenotypes are known, including a rapid response (GR RR) phenotype, which exhibits cell death within hours after treatment, and a non-rapid response (GR NRR) phenotype. The mechanisms of resistance in both GR RR and GR NRR remain unknown. Here, we present a description of the RR phenotype and an investigation of target-site mechanisms on multiple A. trifida accessions. Glyphosate resistance was confirmed in several accessions, and whole-plant levels of resistance ranged from 2.3- to 7.5-fold compared with glyphosate-susceptible (GS) accessions. The two GR phenotypes displayed similar levels of resistance, despite having dramatically different phenotypic responses to glyphosate. Glyphosate resistance was not associated with mutations in EPSPS sequence, increased EPSPS copy number, EPSPS quantity, or EPSPS activity. These encompassing results suggest that resistance to glyphosate in these GR RR A. trifida accessions is not conferred by a target-site resistance mechanism. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

  20. Avoiding math on a rapid timescale: Emotional responsivity and anxious attention in math anxiety.

    Science.gov (United States)

    Pizzie, Rachel G; Kraemer, David J M

    2017-11-01

    Math anxiety (MA) is characterized by negative feelings towards mathematics, resulting in avoidance of math classes and of careers that rely on mathematical skills. Focused on a long timescale, this research may miss important cognitive and affective processes that operate moment-to-moment, changing rapid reactions even when a student simply sees a math problem. Here, using fMRI with an attentional deployment paradigm, we show that MA influences rapid spontaneous emotional and attentional responses to mathematical stimuli upon brief presentation. Critically, participants viewed but did not attempt to solve the problems. Indicating increased threat reactivity to even brief presentations of math problems, increased MA was associated with increased amygdala response during math viewing trials. Functionally and anatomically defined amygdala ROIs yielded similar results, indicating robustness of the finding. Similar to the pattern of vigilance and avoidance observed in specific phobia, behavioral results of the attentional paradigm demonstrated that MA is associated with attentional disengagement for mathematical symbols. This attentional avoidance is specific to math stimuli; when viewing negatively-valenced images, MA is correlated with attentional engagement, similar to other forms of anxiety. These results indicate that even brief exposure to mathematics triggers a neural response related to threat avoidance in highly MA individuals. Copyright © 2017 Elsevier Inc. All rights reserved.

  1. Rapid response and wide range neutronic power measuring systems for fast pulsed reactors

    International Nuclear Information System (INIS)

    Sumita, Kenji; Iida, Toshiyuki; Wakayama, Naoaki.

    1976-01-01

    This paper summarizes our investigation on design principles of the rapid, stable and wide range neutronic power measuring system for fast pulsed reactors. The picoammeter, the logarithmic amplifier, the reactivity meter and the neutron current chamber are the items of investigation. In order to get a rapid response, the method of compensation for the stray capacitance of the feedback circuits and the capacitance of signal cables is applied to the picoammeter, the logarithmic amplifier and the reactivity meter with consideration for the stability margin of a whole detecting system. The response of an ionization current chamber and the method for compensating the ion component of the chamber output to get optimum responses high pass filters are investigated. Statistical fluctuations of the current chamber output are also considered in those works. The optimum thickness of the surrounding moderator of the neutron detector is also discussed from the viewpoint of the pulse shape deformation and the neutron sensitivity increase. The experimental results are reported, which were observed in the pulse operations of the one shot fast pulsed reactor ''YAYOI'' and the one shot TRIGA ''NSRR'' with the measuring systems using those principles. (auth.)

  2. Efficient 3D frequency response modeling with spectral accuracy by the rapid expansion method

    KAUST Repository

    Chu, Chunlei

    2012-07-01

    Frequency responses of seismic wave propagation can be obtained either by directly solving the frequency domain wave equations or by transforming the time domain wavefields using the Fourier transform. The former approach requires solving systems of linear equations, which becomes progressively difficult to tackle for larger scale models and for higher frequency components. On the contrary, the latter approach can be efficiently implemented using explicit time integration methods in conjunction with running summations as the computation progresses. Commonly used explicit time integration methods correspond to the truncated Taylor series approximations that can cause significant errors for large time steps. The rapid expansion method (REM) uses the Chebyshev expansion and offers an optimal solution to the second-order-in-time wave equations. When applying the Fourier transform to the time domain wavefield solution computed by the REM, we can derive a frequency response modeling formula that has the same form as the original time domain REM equation but with different summation coefficients. In particular, the summation coefficients for the frequency response modeling formula corresponds to the Fourier transform of those for the time domain modeling equation. As a result, we can directly compute frequency responses from the Chebyshev expansion polynomials rather than the time domain wavefield snapshots as do other time domain frequency response modeling methods. When combined with the pseudospectral method in space, this new frequency response modeling method can produce spectrally accurate results with high efficiency. © 2012 Society of Exploration Geophysicists.

  3. Rapid post-earthquake modelling of coseismic landslide intensity and distribution for emergency response decision support

    Directory of Open Access Journals (Sweden)

    T. R. Robinson

    2017-09-01

    Full Text Available Current methods to identify coseismic landslides immediately after an earthquake using optical imagery are too slow to effectively inform emergency response activities. Issues with cloud cover, data collection and processing, and manual landslide identification mean even the most rapid mapping exercises are often incomplete when the emergency response ends. In this study, we demonstrate how traditional empirical methods for modelling the total distribution and relative intensity (in terms of point density of coseismic landsliding can be successfully undertaken in the hours and days immediately after an earthquake, allowing the results to effectively inform stakeholders during the response. The method uses fuzzy logic in a GIS (Geographic Information Systems to quickly assess and identify the location-specific relationships between predisposing factors and landslide occurrence during the earthquake, based on small initial samples of identified landslides. We show that this approach can accurately model both the spatial pattern and the number density of landsliding from the event based on just several hundred mapped landslides, provided they have sufficiently wide spatial coverage, improving upon previous methods. This suggests that systematic high-fidelity mapping of landslides following an earthquake is not necessary for informing rapid modelling attempts. Instead, mapping should focus on rapid sampling from the entire affected area to generate results that can inform the modelling. This method is therefore suited to conditions in which imagery is affected by partial cloud cover or in which the total number of landslides is so large that mapping requires significant time to complete. The method therefore has the potential to provide a quick assessment of landslide hazard after an earthquake and may therefore inform emergency operations more effectively compared to current practice.

  4. [Rapid Response obstetrics Team at Instituto Mexicano del Seguro Social,enabling factors].

    Science.gov (United States)

    Dávila-Torres, Javier; González-Izquierdo, José de Jesús; Ruíz-Rosas, Roberto Aguli; Cruz-Cruz, Polita Del Rocío; Hernández-Valencia, Marcelino

    2015-01-01

    There are barriers and enablers for the implementation of Rapid Response Teams in obstetric hospitals. The enabling factors were determined at Instituto Mexicano del Seguro Social (IMSS) MATERIAL AND METHODS: An observational, retrospective study was conducted by analysing the emergency obstetric reports sent by mobile technology and e-mail to the Medical Care Unit of the IMSS in 2013. Frequency and mean was obtained using the Excel 2010 program for descriptive statistics. A total of 164,250 emergency obstetric cases were reported, and there was a mean of 425 messages per day, of which 32.2% were true obstetric emergencies and required the Rapid Response team. By e-mail, there were 73,452 life threatening cases (a mean of 6 cases per day). A monthly simulation was performed in hospitals (480 in total). Enabling factors were messagés synchronisation among the participating personnel,the accurate record of the obstetrics, as well as the simulations performed by the operational staff. The most common emergency was pre-eclampsia-eclampsia with 3,351 reports, followed by obstetric haemorrhage with 2,982 cases. The enabling factors for the implementation of a rapid response team at IMSS were properly timed communication between the central delegation teams, as they allowed faster medical and administrative management and participation of hospital medical teams in the process. Mobile technology has increased the speed of medical and administrative management in emergency obstetric care. However, comparative studies are needed to determine the statistical significance. Published by Masson Doyma México S.A.

  5. Rapid response predicts 12-month post-treatment outcomes in binge-eating disorder: theoretical and clinical implications

    Science.gov (United States)

    Grilo, C. M.; White, M. A.; Wilson, G. T.; Gueorguieva, R.; Masheb, R. M.

    2011-01-01

    Background We examined rapid response in obese patients with binge-eating disorder (BED) in a clinical trial testing cognitive behavioral therapy (CBT) and behavioral weight loss (BWL). Method Altogether, 90 participants were randomly assigned to CBT or BWL. Assessments were performed at baseline, throughout and post-treatment and at 6- and 12-month follow-ups. Rapid response, defined as ≥70% reduction in binge eating by week four, was determined by receiver operating characteristic curves and used to predict outcomes. Results Rapid response characterized 57% of participants (67% of CBT, 47% of BWL) and was unrelated to most baseline variables. Rapid response predicted greater improvements across outcomes but had different prognostic significance and distinct time courses for CBT versus BWL. Patients receiving CBT did comparably well regardless of rapid response in terms of reduced binge eating and eating disorder psychopathology but did not achieve weight loss. Among patients receiving BWL, those without rapid response failed to improve further. However, those with rapid response were significantly more likely to achieve binge-eating remission (62% v. 13%) and greater reductions in binge-eating frequency, eating disorder psychopathology and weight loss. Conclusions Rapid response to treatment in BED has prognostic significance through 12-month follow-up, provides evidence for treatment specificity and has clinical implications for stepped-care treatment models for BED. Rapid responders who receive BWL benefit in terms of both binge eating and short-term weight loss. Collectively, these findings suggest that BWL might be a candidate for initial intervention in stepped-care models with an evaluation of progress after 1 month to identify non-rapid responders who could be advised to consider a switch to a specialized treatment. PMID:21923964

  6. A new role for the ACNP: the rapid response team leader.

    Science.gov (United States)

    Morse, Kate J; Warshawsky, Deborah; Moore, Jacqueline M; Pecora, Denise C

    2006-01-01

    The implementation of a rapid response team or medical emergency team is 1 of the 6 initiatives of the Institute for Healthcare Improvement's 100,000 Lives Campaign with the goal to reduce the number of cardiopulmonary arrests outside the intensive care unit and inpatient mortality rates. The concept of RRT was pioneered in Australia and is now being implemented in many hospitals across the United States. This article reviews the current literature and describes the implementation of an RRT in a community hospital. The first-quarter data after implementation are described. The unique role of the acute care nurse practitioner in this hospital's model is described.

  7. Attenuating the alcohol allure: attentional broadening reduces rapid motivational response to alcohol pictures.

    Science.gov (United States)

    Ryerson, Nicole C; Neal, Lauren B; Gable, Philip A

    2017-04-01

    Past research has found that exposure to alcohol cues causes a narrowing of attentional scope and enhances the neural responses associated with approach motivation. The current research sought to determine if a manipulated broadened (global) attentional scope would reduce approach-motivated neural reactivity to alcohol pictures. In the current study, participants (n = 82) were exposed to alcohol and neutral pictures following either a global or local attentional scope manipulation. Early motivated attentional processing was assessed using the N1 event-related potential (ERP), a neurophysiological marker of rapid motivated attention. A global attentional scope reduced N1 amplitudes to alcohol pictures as compared to a local attentional scope. Self-reported binge drinking related to larger N1 amplitudes to alcohol pictures, but not to neutral pictures. Individuals with greater binge drinking experience demonstrated increased rapid motivated attentional processing to alcohol pictures. These results suggest that enhancing a global (vs. local) attentional scope attenuates rapid motivated attentional processing of alcohol pictures in comparison to neutral pictures. Graphical abstract ᅟ.

  8. Rapid and preferential activation of the c-jun gene during the mammalian UV response

    International Nuclear Information System (INIS)

    Devary, Y.; Gottlieb, R.A.; Lau, L.F.; Karin, M.

    1991-01-01

    Exposure of mammalian cells to DNA-damaging agents leads to activation of a genetic response known as the UV response. Because several previously identified UV-inducible genes contain AP-1 binding sites within their promoters, we investigated the induction of AP-1 activity by DNA-damaging agents. We found that expression of both c-jun and c-fos, which encode proteins that participate in formation of the AP-1 complex, is rapidly induced by two different DNA-damaging agents: UV and H2O2. Interestingly, the c-jun gene is far more responsive to UV than any other immediate-early gene that was examined, including c-fos. Other jun and fos genes were only marginally affected by UV or H2O2. Furthermore, UV is a much more efficient inducer of c-jun than phorbol esters, the standard inducers of c-jun expression. This preferential response of the c-jun gene is mediated by its 5' control region and requires the TPA response element, suggesting that this element also serves as an early target for the signal transduction pathway elicited by DNA damage. Both UV and H2O2 lead to a long-lasting increase in AP-1 binding activity, suggesting that AP-1 may mediate the induction of other damage-inducible genes such as human collagenase

  9. Designing Financial Instruments for Rapid Flood Response Using Remote Sensed and Archival Hazard and Exposure Information

    Science.gov (United States)

    Lall, U.; Allaire, M.; Ceccato, P.; Haraguchi, M.; Cian, F.; Bavandi, A.

    2017-12-01

    Catastrophic floods can pose a significant challenge for response and recovery. A key bottleneck in the speed of response is the availability of funds to a country or regions finance ministry to mobilize resources. Parametric instruments, where the release of funs is tied to the exceedance of a specified index or threshold, rather than to loss verification are well suited for this purpose. However, designing and appropriate index, that is not subject to manipulation and accurately reflects the need is a challenge, especially in developing countries which have short hydroclimatic and loss records, and where rapid land use change has led to significant changes in exposure and hydrology over time. The use of long records of rainfall from climate re-analyses, flooded area and land use from remote sensing to design and benchmark a parametric index considering the uncertainty and representativeness of potential loss is explored with applications to Bangladesh and Thailand. Prospects for broader applicability and limitations are discussed.

  10. Early Flood Detection for Rapid Humanitarian Response: Harnessing Near Real-Time Satellite and Twitter Signals

    Directory of Open Access Journals (Sweden)

    Brenden Jongman

    2015-10-01

    Full Text Available Humanitarian organizations have a crucial role in response and relief efforts after floods. The effectiveness of disaster response is contingent on accurate and timely information regarding the location, timing and impacts of the event. Here we show how two near-real-time data sources, satellite observations of water coverage and flood-related social media activity from Twitter, can be used to support rapid disaster response, using case-studies in the Philippines and Pakistan. For these countries we analyze information from disaster response organizations, the Global Flood Detection System (GFDS satellite flood signal, and flood-related Twitter activity analysis. The results demonstrate that these sources of near-real-time information can be used to gain a quicker understanding of the location, the timing, as well as the causes and impacts of floods. In terms of location, we produce daily impact maps based on both satellite information and social media, which can dynamically and rapidly outline the affected area during a disaster. In terms of timing, the results show that GFDS and/or Twitter signals flagging ongoing or upcoming flooding are regularly available one to several days before the event was reported to humanitarian organizations. In terms of event understanding, we show that both GFDS and social media can be used to detect and understand unexpected or controversial flood events, for example due to the sudden opening of hydropower dams or the breaching of flood protection. The performance of the GFDS and Twitter data for early detection and location mapping is mixed, depending on specific hydrological circumstances (GFDS and social media penetration (Twitter. Further research is needed to improve the interpretation of the GFDS signal in different situations, and to improve the pre-processing of social media data for operational use.

  11. Rapid host immune response and viral dynamics in herpes simplex virus-2 infection

    Science.gov (United States)

    Schiffer, Joshua T; Corey, Lawrence

    2014-01-01

    Herpes Simplex Virus-2 (HSV-2) is episodically shed throughout the human genital tract. While high viral load correlates with development of genital ulcers, shedding also commonly occurs even when ulcers are not present, allowing for silent transmission during coitus and contributing to high seroprevalence of HSV-2 worldwide. Frequent viral reactivation occurs despite diverse and complementary host and viral mechanisms within ganglionic tissue that predispose towards latency, suggesting that viral replication may be constantly occurring in a small minority of neurons within the ganglia. Within genital mucosa, the in vivo expansion and clearance rates of HSV-2 are extremely rapid. Resident dendritic cells and memory HSV-specific T cells persist at prior sites of genital tract reactivation, and in conjunction with prompt innate recognition of infected cells, lead to rapid containment of infected cells. Shedding episodes vary greatly in duration and severity within a single person over time: this heterogeneity appears best explained by variation in the densities of host immunity across the genital tract. The fact that immune responses usually control viral replication in genital skin prior to development of lesions provides optimism that enhancing such responses could lead to effective vaccines and immunotherapies. PMID:23467247

  12. A novel multi-responsive polyampholyte composite hydrogel with excellent mechanical strength and rapid shrinking rate.

    Science.gov (United States)

    Xu, Kun; Tan, Ying; Chen, Qiang; An, Huiyong; Li, Wenbo; Dong, Lisong; Wang, Pixin

    2010-05-15

    Series of hydrophilic core-shell microgels with cross-linked poly(N-isopropylacrylamide) (PNIPAAm) as core and poly(vinyl amine) (PVAm) as shell are synthesized via surfactant-free emulsion polymerization. Then, the microgels are treated with a small amount of potassium persulfate (KPS) to generate free radicals on the amine nitrogens of PVAm, which subsequently initiate the graft copolymerization of acrylic acid (AA), acryloyloxyethyl trimethyl ammonium chloride (DAC), and acrylamide (AAm) onto microgels to prepare multi-responsive composite hydrogels. The composite hydrogels consist of cross-linked ungrafted polyampholyte chains as the first network and microgels with grafted polyampholyte chains as graft point and second network and show surprising mechanical strength and rapid response rate. The investigation shows the compress strength of composite hydrogels is up to 17-30 MPa, which is 60-100 times higher than that of the hydrogel matrix. The composite hydrogel shows reversible switch of transmittance when traveling the lowest critical temperature (LCST) of microgels. When the composite hydrogel swollen in pH 2.86 solution at ambient condition is immersed into the pH 7.00 solution at 45 °C, a rapid dynamic shrinking can be observed. And the character time (τ) of shrinking dynamic of composite hydrogel is 251.9 min, which is less than that of hydrogel matrix (τ=2273.7 min). Copyright © 2010 Elsevier Inc. All rights reserved.

  13. Response time distributions in rapid chess: A large-scale decision making experiment

    Directory of Open Access Journals (Sweden)

    Mariano Sigman

    2010-10-01

    Full Text Available Rapid chess provides an unparalleled laboratory to understand decision making in a natural environment. In a chess game, players choose consecutively around 40 moves in a finite time budget. The goodness of each choice can be determined quantitatively since current chess algorithms estimate precisely the value of a position. Web-based chess produces vast amounts of data, millions of decisions per day, incommensurable with traditional psychological experiments. We generated a database of response times and position value in rapid chess games. We measured robust emergent statistical observables: 1 Response time (RT distributions are long-tailed and show qualitatively distinct forms at different stages of the game, 2 RT of successive moves are highly correlated both for intra- and inter-player moves. These findings have theoretical implications since they deny two basic assumptions of sequential decision making algorithms: RTs are not stationary and can not be generated by a state function. Our results also have practical implications. First, we characterized the capacity of blunders and score fluctuations to predict a player strength, which is yet an open problem in chess softwares. Second, we show that the winning likelihood can be reliably estimated from a weighted combination of remaining times and position evaluation.

  14. Murine Neonates Infected with Yersinia enterocolitica Develop Rapid and Robust Proinflammatory Responses in Intestinal Lymphoid Tissues

    Science.gov (United States)

    Siefker, David T.; Echeverry, Andrea; Brambilla, Roberta; Fukata, Masayuki; Schesser, Kurt

    2014-01-01

    Neonatal animals are generally very susceptible to infection with bacterial pathogens. However, we recently reported that neonatal mice are highly resistant to orogastric infection with Yersinia enterocolitica. Here, we show that proinflammatory responses greatly exceeding those in adults arise very rapidly in the mesenteric lymph nodes (MLN) of neonates. High-level induction of proinflammatory gene expression occurred in the neonatal MLN as early as 18 h postinfection. Marked innate phagocyte recruitment was subsequently detected at 24 h postinfection. Enzyme-linked immunosorbent spot assay (ELISPOT) analyses indicated that enhanced inflammation in neonatal MLN is contributed to, in part, by an increased frequency of proinflammatory cytokine-secreting cells. Moreover, both CD11b+ and CD11b− cell populations appeared to play a role in proinflammatory gene expression. The level of inflammation in neonatal MLN was also dependent on key bacterial components. Y. enterocolitica lacking the virulence plasmid failed to induce innate phagocyte recruitment. In contrast, tumor necrosis factor alpha (TNF-α) protein expression and neutrophil recruitment were strikingly higher in neonatal MLN after infection with a yopP-deficient strain than with wild-type Y. enterocolitica, whereas only modest increases occurred in adults. This hyperinflammatory response was associated with greater colonization of the spleen and higher mortality in neonates, while there was no difference in mortality among adults. This model highlights the dynamic levels of inflammation in the intestinal lymphoid tissues and reveals the protective (wild-type strain) versus harmful (yopP-deficient strain) consequences of inflammation in neonates. Moreover, these results reveal that the neonatal intestinal lymphoid tissues have great potential to rapidly mobilize innate components in response to infection with bacterial enteropathogens. PMID:24478090

  15. A novel incentive-based retail demand response program for collaborative participation of small customers

    NARCIS (Netherlands)

    Zehir, M. A.; Wevers, M. H.; Batman, A.; Bagriyanik, M.; Hurink, J. L.; Kucuk, U.; Soares, F. J.; Ozdemir, A.

    2017-01-01

    Integration of aggregated demand response into the wholesale electricity market is an emerging field of research. Contrary to conventional service providers, most of the demand side participants act voluntarily. However, due to wholesale market regulations, reliable and effective participation of

  16. NIR responsive liposomal system for rapid release of drugs in cancer therapy

    Directory of Open Access Journals (Sweden)

    Chen MM

    2017-06-01

    Full Text Available Ming-Mao Chen,1 Yuan-Yuan Liu,1 Guang-Hao Su,2 Fei-Fei Song,1 Yan Liu,3 Qi-Qing Zhang1,4 1Institute of Biomedical and Pharmaceutical Technology, Fuzhou University, Fuzhou, 2Institute of Pediatric Research, Children’s Hospital of Soochow University, Suzhou, 3State Key Lab of Structural Chemistry, Fujian Institute of Research on the Structure of Matter, Chinese Academy of Sciences, Fuzhou, 4Key Laboratory of Biomedical Material of Tianjin, Institute of Biomedical Engineering, Chinese Academy of Medical Science & Peking Union Medical College, Tianjin, People’s Republic of China Abstract: To design a rapid release liposomal system for cancer therapy, a NIR responsive bubble-generating thermosensitive liposome (BTSL system combined with photothermal agent (Cypate, doxorubicin (DOX, and NH4HCO3 was developed. Cypate/DOX-BTSL exhibited a good aqueous stability, photostability, and photothermal effect. In vitro release suggested that the amounts of DOX released from BTSL were obviously higher than that of (NH42SO4 liposomes at 42°C. After NIR irradiation, the hyperthermic temperature induced by Cypate led to the decomposition of NH4HCO3 and the generation of a large number of CO2 bubbles, triggering a rapid release of drugs. Confocal laser scanning microscope and acridine orange staining indicated that Cypate/DOX-BTSL upon irradiation could facilitate to disrupt the lysosomal membranes and realize endolysosomal escape into cytosol, improving the intracellular uptake of DOX clearly. MTT and trypan blue staining implied that the cell damage of Cypate/DOX-BTSL with NIR irradiation was more severe than that in the groups without irradiation. In vivo results indicated that Cypate/DOX-BTSL with irradiation could dramatically increase the accumulation of DOX in tumor, inhibit tumor growth, and reduce systemic side effects of DOX. These data demonstrated that Cypate/DOX-BTSL has the potential to be used as a NIR responsive liposomal system for a rapid

  17. Rapid shelf-wide cooling response of a stratified coastal ocean to hurricanes.

    Science.gov (United States)

    Seroka, Greg; Miles, Travis; Xu, Yi; Kohut, Josh; Schofield, Oscar; Glenn, Scott

    2017-06-01

    Large uncertainty in the predicted intensity of tropical cyclones (TCs) persists compared to the steadily improving skill in the predicted TC tracks. This intensity uncertainty has its most significant implications in the coastal zone, where TC impacts to populated shorelines are greatest. Recent studies have demonstrated that rapid ahead-of-eye-center cooling of a stratified coastal ocean can have a significant impact on hurricane intensity forecasts. Using observation-validated, high-resolution ocean modeling, the stratified coastal ocean cooling processes observed in two U.S. Mid-Atlantic hurricanes were investigated: Hurricane Irene (2011)-with an inshore Mid-Atlantic Bight (MAB) track during the late summer stratified coastal ocean season-and Tropical Storm Barry (2007)-with an offshore track during early summer. For both storms, the critical ahead-of-eye-center depth-averaged force balance across the entire MAB shelf included an onshore wind stress balanced by an offshore pressure gradient. This resulted in onshore surface currents opposing offshore bottom currents that enhanced surface to bottom current shear and turbulent mixing across the thermocline, resulting in the rapid cooling of the surface layer ahead-of-eye-center. Because the same baroclinic and mixing processes occurred for two storms on opposite ends of the track and seasonal stratification envelope, the response appears robust. It will be critical to forecast these processes and their implications for a wide range of future storms using realistic 3-D coupled atmosphere-ocean models to lower the uncertainty in predictions of TC intensities and impacts and enable coastal populations to better respond to increasing rapid intensification threats in an era of rising sea levels.

  18. Rapid shelf‐wide cooling response of a stratified coastal ocean to hurricanes

    Science.gov (United States)

    Miles, Travis; Xu, Yi; Kohut, Josh; Schofield, Oscar; Glenn, Scott

    2017-01-01

    Abstract Large uncertainty in the predicted intensity of tropical cyclones (TCs) persists compared to the steadily improving skill in the predicted TC tracks. This intensity uncertainty has its most significant implications in the coastal zone, where TC impacts to populated shorelines are greatest. Recent studies have demonstrated that rapid ahead‐of‐eye‐center cooling of a stratified coastal ocean can have a significant impact on hurricane intensity forecasts. Using observation‐validated, high‐resolution ocean modeling, the stratified coastal ocean cooling processes observed in two U.S. Mid‐Atlantic hurricanes were investigated: Hurricane Irene (2011)—with an inshore Mid‐Atlantic Bight (MAB) track during the late summer stratified coastal ocean season—and Tropical Storm Barry (2007)—with an offshore track during early summer. For both storms, the critical ahead‐of‐eye‐center depth‐averaged force balance across the entire MAB shelf included an onshore wind stress balanced by an offshore pressure gradient. This resulted in onshore surface currents opposing offshore bottom currents that enhanced surface to bottom current shear and turbulent mixing across the thermocline, resulting in the rapid cooling of the surface layer ahead‐of‐eye‐center. Because the same baroclinic and mixing processes occurred for two storms on opposite ends of the track and seasonal stratification envelope, the response appears robust. It will be critical to forecast these processes and their implications for a wide range of future storms using realistic 3‐D coupled atmosphere‐ocean models to lower the uncertainty in predictions of TC intensities and impacts and enable coastal populations to better respond to increasing rapid intensification threats in an era of rising sea levels. PMID:28944132

  19. Multiple Rapid Swallow Responses During Esophageal High-Resolution Manometry Reflect Esophageal Body Peristaltic Reserve

    Science.gov (United States)

    Shaker, Anisa; Stoikes, Nathaniel; Drapekin, Jesse; Kushnir, Vladimir; Brunt, L. Michael; Gyawali, C. Prakash

    2014-01-01

    OBJECTIVES Dysphagia may develop following antireflux surgery as a consequence of poor esophageal peristaltic reserve. We hypothesized that suboptimal contraction response following multiple rapid swallows (MRS) could be associated with chronic transit symptoms following antireflux surgery. METHODS Wet swallow and MRS responses on esophageal high-resolution manometry (HRM) were characterized collectively in the esophageal body (distal contractile integral (DCI)), and individually in each smooth muscle contraction segment (S2 and S3 amplitudes) in 63 patients undergoing antireflux surgery and in 18 healthy controls. Dysphagia was assessed using symptom questionnaires. The MRS/wet swallow ratios were calculated for S2 and S3 peak amplitudes and DCI. MRS responses were compared in patients with and without late postoperative dysphagia following antireflux surgery. RESULTS Augmentation of smooth muscle contraction (MRS/wet swallow ratios > 1.0) as measured collectively by DCI was seen in only 11.1% with late postoperative dysphagia, compared with 63.6% in those with no dysphagia and 78.1% in controls (P≤0.02 for each comparison). Similar results were seen with S3 but not S2 peak amplitude ratios. Receiver operating characteristics identified a DCI MRS/wet swallow ratio threshold of 0.85 in segregating patients with late postoperative dysphagia from those with no postoperative dysphagia with a sensitivity of 0.67 and specificity of 0.64. CONCLUSIONS Lack of augmentation of smooth muscle contraction following MRS is associated with late postoperative dysphagia following antireflux surgery, suggesting that MRS responses could assess esophageal smooth muscle peristaltic reserve. Further research is warranted to determine if antireflux surgery needs to be tailored to the MRS response. PMID:24019081

  20. Spectroscopic sensitivity of real-time, rapidly induced phytochemical change in response to damage.

    Science.gov (United States)

    Couture, John J; Serbin, Shawn P; Townsend, Philip A

    2013-04-01

    An ecological consequence of plant-herbivore interactions is the phytochemical induction of defenses in response to insect damage. Here, we used reflectance spectroscopy to characterize the foliar induction profile of cardenolides in Asclepias syriaca in response to damage, tracked in vivo changes and examined the influence of multiple plant traits on cardenolide concentrations. Foliar cardenolide concentrations were measured at specific time points following damage to capture their induction profile. Partial least-squares regression (PLSR) modeling was employed to calibrate cardenolide concentrations to reflectance spectroscopy. In addition, subsets of plants were either repeatedly sampled to track in vivo changes or modified to reduce latex flow to damaged areas. Cardenolide concentrations and the induction profile of A. syriaca were well predicted using models derived from reflectance spectroscopy, and this held true for repeatedly sampled plants. Correlations between cardenolides and other foliar-related variables were weak or not significant. Plant modification for latex reduction inhibited an induced cardenolide response. Our findings show that reflectance spectroscopy can characterize rapid phytochemical changes in vivo. We used reflectance spectroscopy to identify the mechanisms behind the production of plant secondary metabolites, simultaneously characterizing multiple foliar constituents. In this case, cardenolide induction appears to be largely driven by enhanced latex delivery to leaves following damage. © 2013 The Authors. New Phytologist © 2013 New Phytologist Trust.

  1. Intact Rapid Facial Mimicry as well as Generally Reduced Mimic Responses in Stable Schizophrenia Patients

    Science.gov (United States)

    Chechko, Natalya; Pagel, Alena; Otte, Ellen; Koch, Iring; Habel, Ute

    2016-01-01

    Spontaneous emotional expressions (rapid facial mimicry) perform both emotional and social functions. In the current study, we sought to test whether there were deficits in automatic mimic responses to emotional facial expressions in patients (15 of them) with stable schizophrenia compared to 15 controls. In a perception-action interference paradigm (the Simon task; first experiment), and in the context of a dual-task paradigm (second experiment), the task-relevant stimulus feature was the gender of a face, which, however, displayed a smiling or frowning expression (task-irrelevant stimulus feature). We measured the electromyographical activity in the corrugator supercilii and zygomaticus major muscle regions in response to either compatible or incompatible stimuli (i.e., when the required response did or did not correspond to the depicted facial expression). The compatibility effect based on interactions between the implicit processing of a task-irrelevant emotional facial expression and the conscious production of an emotional facial expression did not differ between the groups. In stable patients (in spite of a reduced mimic reaction), we observed an intact capacity to respond spontaneously to facial emotional stimuli. PMID:27303335

  2. Response time distributions in rapid chess: a large-scale decision making experiment.

    Science.gov (United States)

    Sigman, Mariano; Etchemendy, Pablo; Slezak, Diego Fernández; Cecchi, Guillermo A

    2010-01-01

    Rapid chess provides an unparalleled laboratory to understand decision making in a natural environment. In a chess game, players choose consecutively around 40 moves in a finite time budget. The goodness of each choice can be determined quantitatively since current chess algorithms estimate precisely the value of a position. Web-based chess produces vast amounts of data, millions of decisions per day, incommensurable with traditional psychological experiments. We generated a database of response times (RTs) and position value in rapid chess games. We measured robust emergent statistical observables: (1) RT distributions are long-tailed and show qualitatively distinct forms at different stages of the game, (2) RT of successive moves are highly correlated both for intra- and inter-player moves. These findings have theoretical implications since they deny two basic assumptions of sequential decision making algorithms: RTs are not stationary and can not be generated by a state-function. Our results also have practical implications. First, we characterized the capacity of blunders and score fluctuations to predict a player strength, which is yet an open problem in chess softwares. Second, we show that the winning likelihood can be reliably estimated from a weighted combination of remaining times and position evaluation.

  3. Synthetic generation of influenza vaccine viruses for rapid response to pandemics.

    Science.gov (United States)

    Dormitzer, Philip R; Suphaphiphat, Pirada; Gibson, Daniel G; Wentworth, David E; Stockwell, Timothy B; Algire, Mikkel A; Alperovich, Nina; Barro, Mario; Brown, David M; Craig, Stewart; Dattilo, Brian M; Denisova, Evgeniya A; De Souza, Ivna; Eickmann, Markus; Dugan, Vivien G; Ferrari, Annette; Gomila, Raul C; Han, Liqun; Judge, Casey; Mane, Sarthak; Matrosovich, Mikhail; Merryman, Chuck; Palladino, Giuseppe; Palmer, Gene A; Spencer, Terika; Strecker, Thomas; Trusheim, Heidi; Uhlendorff, Jennifer; Wen, Yingxia; Yee, Anthony C; Zaveri, Jayshree; Zhou, Bin; Becker, Stephan; Donabedian, Armen; Mason, Peter W; Glass, John I; Rappuoli, Rino; Venter, J Craig

    2013-05-15

    During the 2009 H1N1 influenza pandemic, vaccines for the virus became available in large quantities only after human infections peaked. To accelerate vaccine availability for future pandemics, we developed a synthetic approach that very rapidly generated vaccine viruses from sequence data. Beginning with hemagglutinin (HA) and neuraminidase (NA) gene sequences, we combined an enzymatic, cell-free gene assembly technique with enzymatic error correction to allow rapid, accurate gene synthesis. We then used these synthetic HA and NA genes to transfect Madin-Darby canine kidney (MDCK) cells that were qualified for vaccine manufacture with viral RNA expression constructs encoding HA and NA and plasmid DNAs encoding viral backbone genes. Viruses for use in vaccines were rescued from these MDCK cells. We performed this rescue with improved vaccine virus backbones, increasing the yield of the essential vaccine antigen, HA. Generation of synthetic vaccine seeds, together with more efficient vaccine release assays, would accelerate responses to influenza pandemics through a system of instantaneous electronic data exchange followed by real-time, geographically dispersed vaccine production.

  4. Monitoring and evaluation of disaster response efforts undertaken by local health departments: a rapid realist review.

    Science.gov (United States)

    Gossip, Kate; Gouda, Hebe; Lee, Yong Yi; Firth, Sonja; Bermejo, Raoul; Zeck, Willibald; Jimenez Soto, Eliana

    2017-06-29

    Local health departments are often at the forefront of a disaster response, attending to the immediate trauma inflicted by the disaster and also the long term health consequences. As the frequency and severity of disasters are projected to rise, monitoring and evaluation (M&E) efforts are critical to help local health departments consolidate past experiences and improve future response efforts. Local health departments often conduct M&E work post disaster, however, many of these efforts fail to improve response procedures. We undertook a rapid realist review (RRR) to examine why M&E efforts undertaken by local health departments do not always result in improved disaster response efforts. We aimed to complement existing frameworks by focusing on the most basic and pragmatic steps of a M&E cycle targeted towards continuous system improvements. For these purposes, we developed a theoretical framework that draws on the quality improvement literature to 'frame' the steps in the M&E cycle. This framework encompassed a M&E cycle involving three stages (i.e., document and assess, disseminate and implement) that must be sequentially completed to learn from past experiences and improve future disaster response efforts. We used this framework to guide our examination of the literature and to identify any context-mechanism-outcome (CMO) configurations which describe how M&E may be constrained or enabled at each stage of the M&E cycle. This RRR found a number of explanatory CMO configurations that provide valuable insights into some of the considerations that should be made when using M&E to improve future disaster response efforts. Firstly, to support the accurate documentation and assessment of a disaster response, local health departments should consider how they can: establish a culture of learning within health departments; use embedded training methods; or facilitate external partnerships. Secondly, to enhance the widespread dissemination of lessons learned and facilitate

  5. Automated Detection of Buildings from Heterogeneous VHR Satellite Images for Rapid Response to Natural Disasters

    Directory of Open Access Journals (Sweden)

    Shaodan Li

    2017-11-01

    Full Text Available In this paper, we present a novel approach for automatically detecting buildings from multiple heterogeneous and uncalibrated very high-resolution (VHR satellite images for a rapid response to natural disasters. In the proposed method, a simple and efficient visual attention method is first used to extract built-up area candidates (BACs from each multispectral (MS satellite image. After this, morphological building indices (MBIs are extracted from all the masked panchromatic (PAN and MS images with BACs to characterize the structural features of buildings. Finally, buildings are automatically detected in a hierarchical probabilistic model by fusing the MBI and masked PAN images. The experimental results show that the proposed method is comparable to supervised classification methods in terms of recall, precision and F-value.

  6. Rapid Quantification of Abscisic Acid by GC-MS/MS for Studies of Abiotic Stress Response.

    Science.gov (United States)

    Verslues, Paul E

    2017-01-01

    Drought and low water potential induce large increases in Abscisic Acid (ABA ) content of plant tissue. This increased ABA content is essential to regulate downstream stress resistance responses; however, the mechanisms regulating ABA accumulation are incompletely known. Thus, the ability to accurately quantify ABA at high throughput and low cost is important for plant stress research. We have combined and modified several previously published protocols to establish a rapid ABA analysis protocol using gas chromatography-tandem mass spectrometry (GC-MS/MS). Derivatization of ABA is performed with (trimethylsilyl)-diazomethane rather than the harder to prepare diazomethane. Sensitivity of the analysis is sufficient that small samples of low water potential treated Arabidopsis thaliana seedlings can be routinely analyzed in reverse genetic studies of putative stress regulators as well as studies of natural variation in ABA accumulation.

  7. ER Stress Causes Rapid Loss of Intestinal Epithelial Stemness through Activation of the Unfolded Protein Response

    Directory of Open Access Journals (Sweden)

    Jarom Heijmans

    2013-04-01

    Full Text Available Stem cells generate rapidly dividing transit-amplifying cells that have lost the capacity for self-renewal but cycle for a number of times until they exit the cell cycle and undergo terminal differentiation. We know very little of the type of signals that trigger the earliest steps of stem cell differentiation and mediate a stem cell to transit-amplifying cell transition. We show that in normal intestinal epithelium, endoplasmic reticulum (ER stress and activity of the unfolded protein response (UPR are induced at the transition from stem cell to transit-amplifying cell. Induction of ER stress causes loss of stemness in a Perk-eIF2α-dependent manner. Inhibition of Perk-eIF2α signaling results in stem cell accumulation in organoid culture of primary intestinal epithelium. Our findings show that the UPR plays an important role in the regulation of intestinal epithelial stem cell differentiation.

  8. Plaque-Like Sclerodermiform Localized Mucinosis Rapidly Responsive to Topical Tacrolimus

    Directory of Open Access Journals (Sweden)

    R. Schmaltz

    2010-08-01

    Full Text Available We report the successful treatment of plaque-like sclerodermiform mucinosis using tacrolimus ointment topically. We present a 70-year-old male with a large chronic erythema and hardening of the nuchal skin and shoulder area. Subjective symptoms were a moderate pruritus and a rather disabling stiffness. A biopsy specimen revealed typical features of lichen myxedematosus. In a subsequent clinical examination, no associated illnesses such as hypothyroidism or gammopathy were found. Since no established therapy exists for this condition, and as there was a lack of response to potent topical glucocorticosteroids, tacrolimus 0.03% ointment was used off-label twice daily. Surprisingly, this resulted in a rapid, almost complete clearance of the skin within three weeks of treatment.

  9. Rapid bedrock uplift in the Antarctic Peninsula explained by viscoelastic response to recent ice unloading

    DEFF Research Database (Denmark)

    Nield, Grace A.; Barletta, Valentina Roberta; Bordoni, Andrea

    2014-01-01

    Since 1995 several ice shelves in the Northern Antarctic Peninsula have collapsed and triggered ice-mass unloading, invoking a solid Earth response that has been recorded at continuous GPS (cGPS) stations. A previous attempt to model the observation of rapid uplift following the 2002 breakup...... of the Palmer cGPS station since 2002 cannot be explained by elastic deformation alone. We apply a viscoelastic model with linear Maxwell rheology to predict uplift since 1995 and test the fit to the Palmer cGPS time series, finding a well constrained upper mantle viscosity but less sensitivity to lithospheric...... thickness. We further constrain the best fitting Earth model by including six cGPS stations deployed after 2009 (the LARISSA network), with vertical velocities in the range 1.7 to 14.9 mm/yr. This results in a best fitting Earth model with lithospheric thickness of 100–140 km and upper mantle viscosity of 6...

  10. A set of rapid-response models for pollutant dispersion assessments in southern Spain coastal waters

    International Nuclear Information System (INIS)

    Perianez, R.; Caravaca, F.

    2010-01-01

    Three rapid-response Lagrangian particle-tracking dispersion models have been developed for southern Spain coastal waters. The three domains cover the Gulf of Cadiz (Atlantic Ocean), the Alboran Sea (Mediterranean), and the Strait of Gibraltar with higher spatial resolution. The models are based on different hydrodynamic submodels, which are run in advance. Tides are calculated using a 2D barotropic model in the three cases. Models used to obtain the residual circulation depend on the physical oceanography of each region. Thus, two-layer models are applied to Gibraltar Strait and Alboran Sea and a 3D baroclinic model is used in the Gulf of Cadiz. Results from these models have been compared with observations to validate them and are then used by the particle-tracking models to calculate dispersion. Chemical, radioactive and oil spills may be simulated, incorporating specific processes for each kind of pollutant. Several application examples are provided.

  11. Effect of a Real-Time Electronic Dashboard on a Rapid Response System.

    Science.gov (United States)

    Fletcher, Grant S; Aaronson, Barry A; White, Andrew A; Julka, Reena

    2017-11-20

    A rapid response system (RRS) may have limited effectiveness when inpatient providers fail to recognize signs of early patient decompensation. We evaluated the impact of an electronic medical record (EMR)-based alerting dashboard on outcomes associated with RRS activation. We used a repeated treatment study in which the dashboard display was successively turned on and off each week for ten 2-week cycles over a 20-week period on the inpatient acute care wards of an academic medical center. The Rapid Response Team (RRT) dashboard displayed all hospital patients in a single view ranked by severity score, updated in real time. The dashboard could be seen within the EMR by any provider, including RRT members. The primary outcomes were the incidence rate ratio (IRR) of all RRT activations, unexpected ICU transfers, cardiopulmonary arrests and deaths on general medical-surgical wards (wards). We conducted an exploratory analysis of first RRT activations. There were 6736 eligible admissions during the 20-week study period. There was no change in overall RRT activations (IRR = 1.14, p = 0.07), but a significant increase in first RRT activations (IRR = 1.20, p = 0.04). There were no significant differences in unexpected ICU transfers (IRR = 1.15, p = 0.25), cardiopulmonary arrests on general wards (IRR = 1.46, p = 0.43), or deaths on general wards (IRR = 0.96, p = 0.89). The introduction of the RRT dashboard was associated with increased initial RRT activations but not overall activations, unexpected ICU transfers, cardiopulmonary arrests, or death. The RRT dashboard is a novel tool to help providers recognize patient decompensation and may improve initial RRT notification.

  12. Condition Help: A Patient- and Family-Initiated Rapid Response System.

    Science.gov (United States)

    Eden, Elizabeth L; Rack, Laurie L; Chen, Ling-Wan; Bump, Gregory M

    2017-03-01

    Rapid response teams (RRTs) help in delivering safe, timely care. Typically they are activated by clinicians using specific parameters. Allowing patients and families to activate RRTs is a novel intervention. The University of Pittsburgh Medical Center developed and implemented a patient- and family-initiated rapid response system called Condition Help (CH). When the CH system is activated, a patient care liaison or an on-duty administrator meets bedside with the unit charge nurse to address the patient's concerns. In this study, we collected demographic data, call reasons, call designations (safety or nonsafety), and outcome information for all CH calls made during the period January 2012 through June 2015. Two hundred forty patients/family members made 367 CH calls during the study period. Most calls were made by patients (76.8%) rather than family members (21.8%). Of the 240 patients, 43 (18%) made multiple calls; their calls accounted for 46.3% of all calls (170/367). Inadequate pain control was the reason for the call in most cases (48.2%), followed by dissatisfaction with staff (12.5%). The majority of calls involved nonsafety issues (83.4%) rather than safety issues (11.4%). In 41.4% of cases, a change in care was made. Patient- and family-initiated RRTs are designed to engage patients and families in providing safer care. In the CH system, safety issues are identified, but the majority of calls involve nonsafety issues. Journal of Hospital Medicine 2017;12:157-161. © 2017 Society of Hospital Medicine

  13. Consumer participation in early detection of the deteriorating patient and call activation to rapid response systems: a literature review.

    Science.gov (United States)

    Vorwerk, Jane; King, Lindy

    2016-01-01

    This review investigated the impact of consumer participation in recognition of patient deterioration and response through call activation in rapid response systems. Nurses and doctors have taken the main role in recognition and response to patient deterioration through hospital rapid response systems. Yet patients and visitors (consumers) have appeared well placed to notice early signs of deterioration. In response, many hospitals have sought to partner health professionals with consumers in detection and response to early deterioration. However, to date, there have been no published research-based reviews to establish the impact of introducing consumer involvement into rapid response systems. A critical research-based review was undertaken. A comprehensive search of databases from 2006-2014 identified 11 studies. Critical appraisal of these studies was undertaken and thematic analysis of the findings revealed four major themes. Following implementation of the consumer activation programmes, the number of calls made by the consumers following detection of deterioration increased. Interestingly, the number of staff calls also increased. Importantly, mortality numbers were found to decrease in one major study following the introduction of consumer call activation. Consumer and staff knowledge and satisfaction with the new programmes indicated mixed results. Initial concerns of the staff over consumer involvement overwhelming the rapid response systems did not eventuate. Evaluation of successful consumer-activated programmes indicated the importance of: effective staff education and training; ongoing consumer education by nurses and clear educational materials. Findings indicated positive patient outcomes following introduction of consumer call activation programmes within rapid response systems. Effective consumer programmes included information that was readily accessible, easy-to-understand and available in a range of multimedia materials accompanied by the

  14. "Identifying the hospitalised patient in crisis"--a consensus conference on the afferent limb of rapid response systems

    DEFF Research Database (Denmark)

    DeVita, Michael A; Smith, Gary B; Adam, Sheila K

    2010-01-01

    Most reports of Rapid Response Systems (RRS) focus on the efferent, response component of the system, although evidence suggests that improved vital sign monitoring and recognition of a clinical crisis may have outcome benefits. There is no consensus regarding how best to detect patient deteriora...

  15. Innate lymphoid cells: models of plasticity for immune homeostasis and rapid responsiveness in protection.

    Science.gov (United States)

    Almeida, F F; Belz, G T

    2016-09-01

    Innate lymphoid cells (ILCs) have stormed onto the immune landscape as "newly discovered" cell types. These tissue-resident sentinels are enriched at mucosal surfaces and engage in complex cross talk with elements of the adaptive immune system and microenvironment to orchestrate immune homeostasis. Many parallels exist between innate cells and T cells leading to the initial partitioning of ILCs into rather rigid subsets that reflect their "adaptive-like" effector cytokines profiles. ILCs themselves, however, have unique attributes that are only just beginning to be elucidated. These features result in complementarity with, rather than complete duplication of, functions of the adaptive immune system. Key transcription factors determine the pathway of differentiation of progenitors towards an ILC1, ILC2, or ILC3 subset. Once formed, flexibility in the responses of these subsets to stimuli unexpectedly allows transdifferentation between the different subsets and the acquisition of altered phenotypes and function. This provides a mechanism for rapid innate immune responsiveness. Here, we discuss the models of differentiation for maintenance and activation of tissue-resident ILCs in maintaining immune homeostasis and protection.

  16. 46. Nurses perception of rapid response team in a tertiary hospital in Saudi Arabia

    Directory of Open Access Journals (Sweden)

    Emad Mraweh Mustafa

    2015-10-01

    Full Text Available For the last 30 years, the goal of improving the survival rate for patients post cardiopulmonary arrest has remained unattainable. This apparent failure to rescue opened the door to devise new strategies to improve patient outcomes at the onset of subtle deterioration, rather than at the point of cardiac arrest. Institute for Healthcare Improvement (IHI introduced the Rapid Response Team (RRT as one of the six preventative steps to save lives. Nurses’ perceptions of the RRT influenced by the content and process support provided. Nurses are responsible to detect the early signs of deterioration, and activate the RRT service. The aim of this cross sectional descriptive study was to examine nurses’ perceptions about the effect of the RRT and perceived content and process support in managing patient deterioration by using mental model maintenance and building at individual, group and hospital levels in a tertiary hospital in the Kingdom of Saudi Arabia. 300 nurses were recruited using a convenience sampling method. The study findings showed that the overall perceptions about the RRT were high. There was a significant positive correlation between the frequent utilization of the RRT and the perceived content support. The analysis of the open ended questions indicated that there were more advantages to have the RRT service than disadvantages. This study suggested that RRT service is influential in improving nurses’ perceptions about managing Patients’ deterioration. Training program about RRT utilization should include both content and process support, which may enhance building and maintaining mental model.

  17. Communication and relationship skills for rapid response teams at hamilton health sciences.

    Science.gov (United States)

    Cziraki, Karen; Lucas, Janie; Rogers, Toni; Page, Laura; Zimmerman, Rosanne; Hauer, Lois Ann; Daniels, Charlotte; Gregoroff, Susan

    2008-01-01

    Rapid response teams (RRT) are an important safety strategy in the prevention of deaths in patients who are progressively failing outside of the intensive care unit. The goal is to intervene before a critical event occurs. Effective teamwork and communication skills are frequently cited as critical success factors in the implementation of these teams. However, there is very little literature that clearly provides an education strategy for the development of these skills. Training in simulation labs offers an opportunity to assess and build on current team skills; however, this approach does not address how to meet the gaps in team communication and relationship skill management. At Hamilton Health Sciences (HHS) a two-day program was developed in collaboration with the RRT Team Leads, Organizational Effectiveness and Patient Safety Leaders. Participants reflected on their conflict management styles and considered how their personality traits may contribute to team function. Communication and relationship theories were reviewed and applied in simulated sessions in the relative safety of off-site team sessions. The overwhelming positive response to this training has been demonstrated in the incredible success of these teams from the perspective of the satisfaction surveys of the care units that call the team, and in the multi-phased team evaluation of their application to practice. These sessions offer a useful approach to the development of the soft skills required for successful RRT implementation.

  18. Rapid-response Sensor Networks Leveraging Open Standards and the Internet of Things

    Science.gov (United States)

    Bermudez, L. E.; Lieberman, J. E.; Lewis, L.; Botts, M.; Liang, S.

    2016-12-01

    New sensor technologies provide an unparalleled capability to collect large numbers of diverse observations about the world around us. Networks of such sensors are especially effective for capturing and analyzing unexpected, fast moving events if they can be deployed with a minimum of time, effort, and cost. A rapid-response sensing and processing capability is extremely important in quickly unfolding events not only to collect data for future research.but also to support response efforts that may be needed by providing up-to-date knowledge of the situation. A recent pilot activity coordinated by the Open Geospatial Consortium combined Sensor Web Enablement (SWE) standards with Internet of Things (IoT) practices to understand better how to set up rapid-response sensor networks in comparable event situations involving accidents or disasters. The networks included weather and environmental sensors, georeferenced UAV and PTZ imagery collectors, and observations from "citizen sensors", as well as virtual observations generated by predictive models. A key feature of each "SWE-IoT" network was one or more Sensor Hubs that connected local, often proprietary sensor device protocols to a common set of standard SWE data types and standard Web interfaces on an IP-based internetwork. This IoT approach provided direct, common, interoperable access to all sensor readings from anywhere on the internetwork of sensors, Hubs, and applications. Sensor Hubs also supported an automated discovery protocol in which activated Hubs registered themselves with a canonical catalog service. As each sensor (wireless or wired) was activated within range of an authorized Hub, it registered itself with that Hub, which in turn registered the sensor and its capabilities with the catalog. Sensor Hub functions were implemented in a range of component types, from personal devices such as smartphones and Raspberry Pi's to full cloud-based sensor services platforms. Connected into a network

  19. UMTS rapid response real-time seismic networks: implementation and strategies at INGV

    Science.gov (United States)

    Govoni, Aladino; Margheriti, Lucia; Moretti, Milena; Lauciani, Valentino; Sensale, Gianpaolo; Bucci, Augusto; Criscuoli, Fabio

    2015-04-01

    The benefits of portable real-time seismic networks are several and well known. During the management of a temporary experiment from the real-time data it is possible to detect and fix rapidly problems with power supply, time synchronization, disk failures and, most important, seismic signal quality degradation due to unexpected noise sources or sensor alignment/tampering. This usually minimizes field maintenance trips and maximizes both the quantity and the quality of the acquired data. When the area of the temporary experiment is not well monitored by the local permanent network, the real-time data from the temporary experiment can be fed to the permanent network monitoring system improving greatly both the real-time hypocentral locations and the final revised bulletin. All these benefits apply also in case of seismic crises when rapid deployment stations can significantly contribute to the aftershock analysis. Nowadays data transmission using meshed radio networks or satellite systems is not a big technological problem for a permanent seismic network where each site is optimized for the device power consumption and is usually installed by properly specialized technicians that can configure transmission devices and align antennas. This is not usually practical for temporary networks and especially for rapid response networks where the installation time is the main concern. These difficulties are substantially lowered using the now widespread UMTS technology for data transmission. A small (but sometimes power hungry) properly configured device with an omnidirectional antenna must be added to the station assembly. All setups are usually configured before deployment and this allows for an easy installation also by untrained personnel. We describe here the implementation of a UMTS based portable seismic network for both temporary experiments and rapid response applications developed at INGV. The first field experimentation of this approach dates back to the 2009 L

  20. Evaluating the comparative effectiveness of different demand side interventions to increase maternal health service utilization and practice of birth spacing in South Kivu, Democratic Republic of Congo: an innovative, mixed methods approach.

    Science.gov (United States)

    Dumbaugh, Mari; Bapolisi, Wyvine; van de Weerd, Jennie; Zabiti, Michel; Mommers, Paula; Balaluka, Ghislain Bisimwa; Merten, Sonja

    2017-07-03

    In this protocol we describe a mixed methods study in the province of South Kivu, Democratic Republic of Congo evaluating the effectiveness of different demand side strategies to increase maternal health service utilization and the practice of birth spacing. Conditional service subsidization, conditional cash transfers and non-monetary incentives aim to encourage women to use maternal health services and practice birth spacing in two different health districts. Our methodology will comparatively evaluate the effectiveness of different approaches against each other and no intervention. This study comprises four main research activities: 1) Formative qualitative research to determine feasibility of planned activities and inform development of the quantitative survey; 2) A community-based, longitudinal survey; 3) A retrospective review of health facility records; 4) Qualitative exploration of intervention acceptability and emergent themes through in-depth interviews with program participants, non-participants, their partners and health providers. Female community health workers are engaged as core members of the research team, working in tandem with female survey teams to identify women in the community who meet eligibility criteria. Female community health workers also act as key informants and community entry points during methods design and qualitative exploration. Main study outcomes are completion of antenatal care, institutional delivery, practice of birth spacing, family planning uptake and intervention acceptability in the communities. Qualitative methods also explore decision making around maternal health service use, fertility preference and perceptions of family planning. The innovative mixed methods design allows quantitative data to inform the relationships and phenomena to be explored in qualitative collection. In turn, qualitative findings will be triangulated with quantitative findings. Inspired by the principles of grounded theory, qualitative

  1. Rapid-onset obesity with hypothalamic dysfunction, hypoventilation, and autonomic dysregulation (ROHHAD): Response to ventilatory challenges.

    Science.gov (United States)

    Carroll, Michael S; Patwari, Pallavi P; Kenny, Anna S; Brogadir, Cindy D; Stewart, Tracey M; Weese-Mayer, Debra E

    2015-12-01

    Hypoventilation is a defining feature of Rapid-onset Obesity with Hypothalamic dysfunction, Hypoventilation and Autonomic Dysregulation (ROHHAD), a rare respiratory and autonomic disorder. This chronic hypoventilation has been explained as the result of dysfunctional chemosensory control circuits, possibly affecting peripheral afferent input, central integration, or efferent motor control. However, chemosensory function has never been quantified in a cohort of ROHHAD patients. Therefore, the purpose of this study was to assess the response to awake ventilatory challenge testing in children and adolescents with ROHHAD. The ventilatory, cardiovascular and cerebrovascular responses in 25 distinct comprehensive physiological recordings from seven unique ROHHAD patients to three different gas mixtures were analyzed at breath-to-breath and beat-to-beat resolution as absolute measures, as change from baseline, or with derived metrics. Physiologic measures were recorded during a 3-min baseline period of room air, a 3-min gas exposure (of 100% O2; 95% O2, 5% CO2; or 14% O2, 7% CO2 balanced with N2), and a 3-min recovery period. An additional hypoxic challenge was conducted which consisted of either five or seven tidal breaths of 100% N2. While ROHHAD cases showed a diminished VT and inspiratory drive response to hypoxic hypercapnia and absent behavioral awareness of the physiologic compromise, most ventilatory, cardiovascular, and cerebrovascular measures were similar to those of previously published controls using an identical protocol, suggesting a mild chemosensory deficit. Nonetheless, the high mortality rate, comorbidity and physiological fragility of patients with ROHHAD demand continued clinical vigilance. © 2015 Wiley Periodicals, Inc.

  2. Rapid assessment response (RAR study: drug use and health risk - Pretoria, South Africa

    Directory of Open Access Journals (Sweden)

    Trautmann Franz

    2011-06-01

    Full Text Available Abstract Background Within a ten year period South Africa has developed a substantial illicit drug market. Data on HIV risk among drug using populations clearly indicate high levels of HIV risk behaviour due to the sharing of injecting equipment and/or drug-related unprotected sex. While there is international evidence on and experience with adequate responses, limited responses addressing drug use and drug-use-related HIV and other health risks are witnessed in South Africa. This study aimed to explore the emerging problem of drug-related HIV transmission and to stimulate the development of adequate health services for the drug users, by linking international expertise and local research. Methods A Rapid Assessment and Response (RAR methodology was adopted for the study. For individual and focus group interviews a semi-structured questionnaire was utilised that addressed key issues. Interviews were conducted with a total of 84 key informant (KI participants, 63 drug user KI participants (49 males, 14 females and 21 KI service providers (8 male, 13 female. Results and Discussion Adverse living conditions and poor education levels were cited as making access to treatment harder, especially for those living in disadvantaged areas. Heroin was found to be the substance most available and used in a problematic way within the Pretoria area. Participants were not fully aware of the concrete health risks involved in drug use, and the vague ideas held appear not to allow for concrete measures to protect themselves. Knowledge with regards to substance related HIV/AIDS transmission is not yet widespread, with some information sources disseminating incorrect or unspecific information. Conclusions The implementation of pragmatic harm-reduction and other evidence-based public health care policies that are designed to reduce the harmful consequences associated with substance use and HIV/AIDS should be considered. HIV testing and treatment services also need to

  3. Using rapid assessment and response to operationalise physical activity strategic health communication campaigns in Tonga.

    Science.gov (United States)

    Turk, Tahir; Latu, Netina; Cocker-Palu, Elizabeth; Liavaa, Villiami; Vivili, Paul; Gloede, Sara; Simons, Allison

    2013-04-01

    The aim of the present study was to identify stakeholder and program beneficiary needs and wants in relation to a netball communication strategy in Tonga. In addition, the study aimed to more clearly identify audience segments for targeting of communication campaigns and to identify any barriers or benefits to engaging in the physical activity program. A rapid assessment and response (RAR) methodology was used. The elicitation research encompassed qualitative fieldwork approaches, including semistructured interviews with key informants and focus group discussions with program beneficiaries. Desk research of secondary data sources supported in-field findings. A number of potential barriers to behavioural compliance existed, including cultural factors, gender discrimination, socioeconomic factors, stigmatising attitudes, the threat of domestic violence, infrastructure and training issues. Factors contributing to participation in physical activity included the fun and social aspects of the sport, incentives (including career opportunities, highlighting the health benefits of the activity and the provision of religious and cultural sanctions by local leaders towards the increased physical activity of women. The consultative approach of RAR provided a more in-depth understanding of the need for greater levels of physical activity and opportunities for engagement by all stakeholders. The approach facilitated opportunities for the proposed health behaviours to be realised through the communication strategy. Essential insights for the strategy design were identified from key informants, as well as ensuring future engagement of these stakeholders into the strategy. So what? The expanded use of RAR to inform the design of social marketing interventions is a practical approach to data collection for non-communicable diseases and other health issues in developing countries. The approach allows for the rapid mobilisation of scarce resources for the implementation of more

  4. A mobile radiological laboratory for rapid response to off-site radiation emergencies

    Energy Technology Data Exchange (ETDEWEB)

    Katoch, D. S.; Sharma, R. C.; Mehta, D. J.; Raj, V. Venkat [Bhabha Atomic Research Centre, Mumbai (India)

    2002-07-01

    A mobile radiological laboratory (MRL) has been designed and developed primarily for providing a rapid response to radiation emergencies arising as a consequence of nuclear and/or radiological accidents. It is equipped specifically to monitor the environment and provide quick assessment of radiological hazards to the population living within a radius of 30 km around a nuclear facility. In this paper, various design features of an Indian MRL together with the details of installed equipment are presented. The MRL has been designed for a continuous outdoor operation of about two weeks. It is built on a 10.70 m long air suspension Bus Chassis and has four sections : Driver's Cabin, Main Counting Laboratory, Whole Body Monitor and Rear section housing general utilities. The electric power is provided by two diesel generators during field operation and by 230 V AC mains supply at headquarters and wherever possible. The equipment installed in the MRL includes : Alpha, beta and gamma counting systems and low and high volume air samplers for the assessment of radioactive contents in the samples of air, water, soil and vegetation; environment dose rate meters and a variety of survey meters for evaluating any potential increase in radiation levels; personal dosimeters to control external radiation exposure; personal protective equipment for avoiding skin and clothing contamination; a chair type of whole body monitor for the assessment of internal radioactive contamination of the human body, in particular, thyroidal uptake of radioiodine; an automatic weather station for recording continuously the meteorological parameters and a satellite based global positioning system to continuously track and display the geographical location of the MRL. The calibrations of the installed equipment are presently in progress. Preliminary results obtained for the methods needed for rapid detection of gamma emitters in the environment and human body, namely, in situ gamma spectrometry and

  5. Rapid Response Tools and Datasets for Post-fire Hydrological Modeling

    Science.gov (United States)

    Miller, Mary Ellen; MacDonald, Lee H.; Billmire, Michael; Elliot, William J.; Robichaud, Pete R.

    2016-04-01

    Rapid response is critical following natural disasters. Flooding, erosion, and debris flows are a major threat to life, property and municipal water supplies after moderate and high severity wildfires. The problem is that mitigation measures must be rapidly implemented if they are to be effective, but they are expensive and cannot be applied everywhere. Fires, runoff, and erosion risks also are highly heterogeneous in space, so there is an urgent need for a rapid, spatially-explicit assessment. Past post-fire modeling efforts have usually relied on lumped, conceptual models because of the lack of readily available, spatially-explicit data layers on the key controls of topography, vegetation type, climate, and soil characteristics. The purpose of this project is to develop a set of spatially-explicit data layers for use in process-based models such as WEPP, and to make these data layers freely available. The resulting interactive online modeling database (http://geodjango.mtri.org/geowepp/) is now operational and publically available for 17 western states in the USA. After a fire, users only need to upload a soil burn severity map, and this is combined with the pre-existing data layers to generate the model inputs needed for spatially explicit models such as GeoWEPP (Renschler, 2003). The development of this online database has allowed us to predict post-fire erosion and various remediation scenarios in just 1-7 days for six fires ranging in size from 4-540 km2. These initial successes have stimulated efforts to further improve the spatial extent and amount of data, and add functionality to support the USGS debris flow model, batch processing for Disturbed WEPP (Elliot et al., 2004) and ERMiT (Robichaud et al., 2007), and to support erosion modeling for other land uses, such as agriculture or mining. The design and techniques used to create the database and the modeling interface are readily repeatable for any area or country that has the necessary topography

  6. Rapid Weight Loss Elicits Harmful Biochemical and Hormonal Responses in Mixed Martial Arts Athletes.

    Science.gov (United States)

    Coswig, Victor Silveira; Fukuda, David Hideyoshi; Del Vecchio, Fabrício Boscolo

    2015-10-01

    The purpose of this study was to compare biochemical and hormonal responses between mixed martial arts (MMA) competitors with minimal prefight weight loss and those undergoing rapid weight loss (RWL). Blood samples were taken from 17 MMA athletes (Mean± SD; age: 27.4 ±5.3yr; body mass: 76.2 ± 12.4kg; height: 1.71 ± 0.05m and training experience: 39.4 ± 25 months) before and after each match, according to the official events rules. The no rapid weight loss (NWL, n = 12) group weighed in on the day of the event (~30 min prior fight) and athletes declared not having used RWL strategies, while the RWL group (n = 5) weighed in 24 hr before the event and the athletes claimed to have lost 7.4 ± 1.1kg, approximately 10% of their body mass in the week preceding the event. Results showed significant (p < .05) increases following fights, regardless of group, in lactate, glucose, lactate dehydrogenase (LDH), creatinine, and cortisol for all athletes. With regard to group differences, NWL had significantly (p < .05) greater creatinine levels (Mean± SD; pre to post) (NWL= 101.6 ± 15-142.3 ± 22.9μmol/L and RWL= 68.9 ± 10.6-79.5 ± 15.9μmol/L), while RWL had higher LDH (median [interquartile range]; pre to post) (NWL= 211.5[183-236] to 231[203-258]U/L and RWL= 390[370.5-443.5] to 488[463.5-540.5]U/L) and AST (NWL= 30[22-37] to 32[22-41]U/L and 39[32.5-76.5] to 72[38.5-112.5] U/L) values (NWL versus RWL, p < .05). Post hoc analysis showed that AST significantly increased in only the RWL group, while creatinine increased in only the NWL group. The practice of rapid weight loss showed a negative impact on energy availability and increased both muscle damage markers and catabolic expression in MMA fighters.

  7. Adenovirus-Vectored Vaccine as a Rapid-Response Tool Against Avian Influenza Pandemic

    International Nuclear Information System (INIS)

    Van Kampen, K. R.; Tang, D. C.

    2007-01-01

    Influenza viruses in nature undergo genetic mutation and reassortment. Three pandemics of avian influenza in man were recorded in the twentieth century. Highly pathogenic avian influenza (HPAI) viruses currently in circulation pose a threat for another world-wide pandemic, if they become transmissible from man to man. Manufacturing protective vaccines using current egg-based technology is often difficult due to the virulence of the virus and its adverse effects on the embryonating egg substrate. New technologies allow the creation of safe and protective pandemic influenza vaccines without the need for egg based substrates. These technologies allow new vaccines to be created in less than one month. Manufacturing is in tissue culture, not eggs. Vaccine can be administered to man non-invasively, without adjuvants, eliciting a rapid and protective immune response. Protective immunity against avian influenza (AI) virus was elicited in chickens by single-dose in ovo vaccination with a replication-competent adenovirus (RCA)-free human adenovirus serotype 5 (Ad5)-derived vector encoding an H5N9 avian influenza virus hemagglutinin. Vaccinated chickens were protected against both H5N1 and H5N2 HPAI virus challenges. Mass-administration of this bird flu vaccine can be streamlined with available robotic in ovo injectors. Vaccination using this vaccine could protect the the largest host reservoir (chickens) and greatly reduce the exposure of man to avian influenza. In addition, Ad5-vectored vaccines can be produced rapidly and the safety margin of a non-replicating vector is superior to that of a replicating counterpart. Furthermore, this mode of vaccination is compatible with epidemiological surveys of natural AI virus infections. In addition to mass immunization of poultry, both animals and humans have been effectively immunized by intranasal administration of Ad5-vectored influenza vaccines without any appreciable side effects, even in mice and human volunteers with

  8. Rapid-Response Characterization of Near-Earth Asteroids Using KMTNet-SAAO

    Science.gov (United States)

    Erasmus, Nicolas; Mommert, Michael; Trilling, David E.; Sickafoose, Amanda A.; van Gend, Carel; Hora, Joseph L.; Worters, Hannah L.

    2017-10-01

    We present here VRI spectrophotometry of 39 near-Earth asteroids (NEAs) observed with the Sutherland, South Africa, node of the Korea Microlensing Telescope Network (KMTNet). Of the 39 NEAs, 19 were targeted, but because of KMTNet’s large 2 deg × 2 deg field of view, 20 serendipitous NEAs were also captured in the observing fields. Our rapid-response approach meant targeted observations were performed within 44 days (median: 16 days, min: 4 days) of each NEA’s discovery date. Our broadband spectrophotometry is reliable enough to distinguish among four asteroid taxonomies and we were able to confidently categorize 31 of the 39 observed targets as either a S-, C-, X- or D-type asteroid. Our data suggest that the ratio between “stony” S-type NEAs and “not- stony” (C+X+D)-type NEAs, with H magnitudes between 15 and 25, is roughly 1:1. Additionally, we report ~1-hour light curve data for each NEA. Of the 39 targets, we were able to resolve the complete rotation period and amplitude for six and place lower limits for the remaining targets.Based on the success of this pilot study we plan to continue KMTNet observations but also make use of Lesedi, a new 1-meter remotely-operable telescope also situated in Sutherland, to perform similar spectrophotometric observations in the future. As before, we plan to target newly discovered NEAs in order to continue the rapid-response approach. With Lesedi, observations will take place throughout the year and we plan to include smaller NEAs (larger H magnitudes) in our sample. We will also increase the observed duration of each NEA to 2-3 hours so we are more likely to observe a complete rotation period for our observed NEAs.This study was facilitated by observations made at the South African Astronomical Observatory (SAAO) and this work is partially supported by the South African National Research Foundation (NRF). This work is supported in part by the National Aeronautics and Space Administration (NASA) under grant

  9. Zenith: A Radiosonde Detector for Rapid-Response Ionizing Atmospheric Radiation Measurements During Solar Particle Events

    Science.gov (United States)

    Dyer, A. C. R.; Ryden, K. A.; Hands, A. D. P.; Dyer, C.; Burnett, C.; Gibbs, M.

    2018-03-01

    Solar energetic particle events create radiation risks for aircraft, notably single-event effects in microelectronics along with increased dose to crew and passengers. In response to this, some airlines modify their flight routes after automatic alerts are issued. At present these alerts are based on proton flux measurements from instruments onboard satellites, so it is important that contemporary atmospheric radiation measurements are made and compared. This paper presents the development of a rapid-response system built around the use of radiosondes equipped with a radiation detector, Zenith, which can be launched from a Met Office weather station after significant solar proton level alerts are issued. Zenith is a compact, battery-powered solid-state radiation monitor designed to be connected to a Vaisala RS-92 radiosonde, which transmits all data to a ground station as it ascends to an altitude of 33 km. Zenith can also be operated as a stand-alone detector when connected to a laptop, providing real-time count rates. It can also be adapted for use on unmanned aerial vehicles. Zenith has been flown on the Met Office Civil Contingency Aircraft, taken to the European Organization for Nuclear Research-EU high energy Reference Field facility for calibration and launched on a meteorological balloon at the Met Office's weather station in Camborne, Cornwall, UK. During this sounding, Zenith measured the Pfotzer-Regener maximum to be at an altitude of 18-20 km where the count rate was measured to be 1.15 c s-1 cm-2 compared to 0.02 c s-1 cm-2 at ground level.

  10. Rapid-Response or Repeat-Mode Topography from Aerial Structure from Motion

    Science.gov (United States)

    Nissen, E.; Johnson, K. L.; Fitzgerald, F. S.; Morgan, M.; White, J.

    2014-12-01

    This decade has seen a surge of interest in Structure-from-Motion (SfM) as a means of generating high-resolution topography and coregistered texture maps from stereo digital photographs. Using an unstructured set of overlapping photographs captured from multiple viewpoints and minimal GPS ground control, SfM solves simultaneously for scene topography and camera positions, orientations and lens parameters. The use of cheap unmanned aerial vehicles or tethered helium balloons as camera platforms expedites data collection and overcomes many of the cost, time and logistical limitations of LiDAR surveying, making it a potentially valuable tool for rapid response mapping and repeat monitoring applications. We begin this presentation by assessing what data resolutions and precisions are achievable using a simple aerial camera platform and commercial SfM software (we use the popular Agisoft Photoscan package). SfM point clouds generated at two small (~0.1 km2), sparsely-vegetated field sites in California compare favorably with overlapping airborne and terrestrial LiDAR surveys, with closest point distances of a few centimeters between the independent datasets. Next, we go on to explore the method in more challenging conditions, in response to a major landslide in Mesa County, Colorado, on 25th May 2014. Photographs collected from a small UAV were used to generate a high-resolution model of the 4.5 x 1 km landslide several days before an airborne LiDAR survey could be organized and flown. An initial estimate of the mass balance of the landslide could quickly be made by differencing this model against pre-event topography generated using stereo photographs collected in 2009 as part of the National Agricultural Imagery Program (NAIP). This case study therefore demonstrates the rich potential offered by this technique, as well as some of the challenges, particularly with respect to the treatment of vegetation.

  11. Utility and assessment of non-technical skills for rapid response systems and medical emergency teams.

    Science.gov (United States)

    Chalwin, R P; Flabouris, A

    2013-09-01

    Efforts are ongoing to improve outcomes from cardiac arrest and medical emergencies. A promising quality improvement modality is use of non-technical skills (NTS) that aim to address human factors through improvements in performance of leadership, communication, situational awareness and decision-making. Originating in the airline industry, NTS training has been successfully introduced into anaesthesia, surgery, emergency medicine and other acute medical specialities. Some aspects of NTS have already achieved acceptance for cardiac arrest teams. Leadership skills are emphasised in advanced life support training and have shown favourable results when employed in simulated and clinical resuscitation scenarios. The application of NTS in medical emergency teams as part of a rapid response system attending medical emergencies is less certain; however, observations of simulations have also shown promise. This review highlights the potential benefits of NTS competency for cardiac arrest teams and, more importantly, medical emergency teams because of the diversity of clinical scenarios encountered. Discussion covers methods to assess and refine NTS and NTS training to optimise performance in the clinical environment. Increasing attention should be applied to yielding meaningful patient and organisational outcomes from use of NTS. Similarly, implementation of any training course should receive appropriate scrutiny to refine team and institutional performance. © 2013 The Authors; Internal Medicine Journal © 2013 Royal Australasian College of Physicians.

  12. Organizational Perspectives on Rapid Response Team Structure, Function, and Cost: A Qualitative Study.

    Science.gov (United States)

    Smith, Patricia L; McSweeney, Jean

    Understanding how an organization determines structure and function of a rapid response team (RRT), as well as cost evaluation and implications, can provide foundational knowledge to guide decisions about RRTs. The objectives were to (1) identify influencing factors in organizational development of RRT structure and function and (2) describe evaluation of RRT costs. Using a qualitative, ethnographic design, nurse executives and experts in 15 moderate-size hospitals were interviewed to explore their decision-making processes in determining RRT structure and function. Face-to-face interviews were audio recorded and transcribed verbatim and verified for accurateness. Using content analysis and constant comparison, interview data were analyzed. Demographic data were analyzed using descriptive statistics. The sample included 27 participants from 15 hospitals in 5 south-central states. They described a variety of RRT responders and functions, with the majority of hospitals having a critical care charge nurse attending all RRT calls for assistance. Others described a designated RRT nurse with primary RRT duties as responder to all RRT calls. Themes of RRT development from the data included influencers, decision processes, and thoughts about cost. It is important to understand how hospitals determine optimal structure and function to enhance support of quality nursing care. Determining the impact of an RRT on costs and benefits is vital in balancing patient safety and limited resources. Future research should focus on clarifying differences between team structure and function in outcomes as well as the most effective means to estimate costs and benefits.

  13. FIRST RESULTS FROM THE RAPID-RESPONSE SPECTROPHOTOMETRIC CHARACTERIZATION OF NEAR-EARTH OBJECTS USING UKIRT

    Energy Technology Data Exchange (ETDEWEB)

    Mommert, M.; Trilling, D. E.; Petersen, E. [Department of Physics and Astronomy, Northern Arizona University, Flagstaff, AZ 86001 (United States); Borth, D. [Deutsches Forschungszentrum für Künstliche Intelligenz (DFKI), D-67663 Kaiserslautern (Germany); Jedicke, R. [Institute for Astronomy, University of Hawaii at Manoa, Honolulu, HI 96822 (United States); Butler, N. [School of Earth and Space Exploration, Arizona State University, Tempe, AZ 85287 (United States); Reyes-Ruiz, M. [Universidad Nacional Autónoma de México, Instituto de Astronomía, Ensenada, B.C. 22860, México (Mexico); Pichardo, B. [Instituto de Astronomía, Universidad Nacional Autónoma de México, Ciudad Universitaria, D.F. 04510, México (Mexico); Axelrod, T. [Steward Observatory, University of Arizona, Tucson, AZ 85721 (United States); Moskovitz, N., E-mail: michael.mommert@nau.edu [Lowell Observatory, Flagstaff, AZ 86001 (United States)

    2016-04-15

    Using the Wide Field Camera for the United Kingdom Infrared Telescope (UKIRT), we measure the near-infrared colors of near-Earth objects (NEOs) in order to put constraints on their taxonomic classifications. The rapid-response character of our observations allows us to observe NEOs when they are close to the Earth and bright. Here we present near-infrared color measurements of 86 NEOs, most of which were observed within a few days of their discovery, allowing us to characterize NEOs with diameters of only a few meters. Using machine-learning methods, we compare our measurements to existing asteroid spectral data and provide probabilistic taxonomic classifications for our targets. Our observations allow us to distinguish between S-complex, C/X-complex, D-type, and V-type asteroids. Our results suggest that the fraction of S-complex asteroids in the whole NEO population is lower than the fraction of ordinary chondrites in the meteorite fall statistics. Future data obtained with UKIRT will be used to investigate the significance of this discrepancy.

  14. Wing Leading Edge RCC Rapid Response Damage Prediction Tool (IMPACT2)

    Science.gov (United States)

    Clark, Robert; Cottter, Paul; Michalopoulos, Constantine

    2013-01-01

    This rapid response computer program predicts Orbiter Wing Leading Edge (WLE) damage caused by ice or foam impact during a Space Shuttle launch (Program "IMPACT2"). The program was developed after the Columbia accident in order to assess quickly WLE damage due to ice, foam, or metal impact (if any) during a Shuttle launch. IMPACT2 simulates an impact event in a few minutes for foam impactors, and in seconds for ice and metal impactors. The damage criterion is derived from results obtained from one sophisticated commercial program, which requires hours to carry out simulations of the same impact events. The program was designed to run much faster than the commercial program with prediction of projectile threshold velocities within 10 to 15% of commercial-program values. The mathematical model involves coupling of Orbiter wing normal modes of vibration to nonlinear or linear springmass models. IMPACT2 solves nonlinear or linear impact problems using classical normal modes of vibration of a target, and nonlinear/ linear time-domain equations for the projectile. Impact loads and stresses developed in the target are computed as functions of time. This model is novel because of its speed of execution. A typical model of foam, or other projectile characterized by material nonlinearities, impacting an RCC panel is executed in minutes instead of hours needed by the commercial programs. Target damage due to impact can be assessed quickly, provided that target vibration modes and allowable stress are known.

  15. Tracheostomy Complications as a Trigger for an Airway Rapid Response: Analysis and Quality Improvement Considerations.

    Science.gov (United States)

    Rassekh, Christopher H; Zhao, Jing; Martin, Niels D; Chalian, Ara A; Atkins, Joshua H

    2015-12-01

    To analyze the subset of airway rapid response (ARR) calls related to tracheostomy identified over a 46-month period from August 2011 to May 2015 to determine proximate cause, intervention, and outcome and to develop process improvement initiatives. Single-institution multidisciplinary retrospective cohort study. Tertiary care academic medical center in a large urban setting. Hospital inpatients with an in situ tracheostomy or laryngectomy who experienced an ARR. Detailed review of operator, hospital, and patient records related to ARR system activations over a 46-month period. ARR was activated for 28 patients with existing tracheostomy. The cohort included open tracheostomy (n = 14), percutaneous tracheostomy (n = 8), laryngectomy stoma (n = 3), and indeterminate technique (n = 3). The most frequent triggers for emergency airway intervention were decannulation (n = 16), followed by mucus plugging (n = 4). The mean body mass index of ARR patients was higher than that of a comparator tracheostomy cohort (32.9 vs 26.3, P 40 in 9 ARR patients. There was 1 mortality in the series. Tracheostomy is a major trigger for ARR with potential fatal outcome. Factors that may contribute to tracheostomy emergencies include high body mass index, surgical technique for open tracheostomy or percutaneous tracheostomy, tracheostomy tube size, and bedside tracheostomy management. Results have triggered a hospital-wide practice improvement plan focused on tracheostomy awareness and documentation, discrete process changes, and implementation of guidelines for emergency management. © American Academy of Otolaryngology—Head and Neck Surgery Foundation 2015.

  16. Rapid response sensor to monitor the temperature and flow of liquid metals

    International Nuclear Information System (INIS)

    McCann, J.D.

    1980-01-01

    Two forms of a sensor capable of simultaneously monitoring the temperature and flow of liquid metal coolants within a reactor are described. They operate by measuring the coupling impedances between the sensor and the surrounding electrically conductive coolant. Since the system utilises electrical rather than thermal properties, the response to perturbations is rapid, typically displaying the changed conditions within a few milliseconds. The first form of the sensor was designed to operate whilst protected by a thick walled service tube positioned in the reactor coolant. Providing bends in the tube had a radius greater than 70 cm, the sensor could be removed for inspection and maintenance if necessary. The second sensor was fitted inside a streamlined NaK proof capsule. This was inserted directly into the coolant outlet stream of a fuel pin assembly in the Dounreay Fast Reactor. In this form the sensor successfully monitored flow, entrained gas and temperature excursions during the final operating cycle of D.F.R. (author)

  17. Rapid and Quantitative Assessment of Cancer Treatment Response Using In Vivo Bioluminescence Imaging

    Directory of Open Access Journals (Sweden)

    Alnawaz Rehemtulla

    2000-01-01

    Full Text Available Current assessment of orthotopic tumor models in animals utilizes survival as the primary therapeutic end point. In vivo bioluminescence imaging (BLI is a sensitive imaging modality that is rapid and accessible, and may comprise an ideal tool for evaluating antineoplastic therapies [1 ]. Using human tumor cell lines constitutively expressing luciferase, the kinetics of tumor growth and response to therapy have been assessed in intraperitoneal [2], subcutaneous, and intravascular [3] cancer models. However, use of this approach for evaluating orthotopic tumor models has not been demonstrated. In this report, the ability of BLI to noninvasively quantitate the growth and therapeuticinduced cell kill of orthotopic rat brain tumors derived from 9L gliosarcoma cells genetically engineered to stably express firefly luciferase (9LLuc was investigated. Intracerebral tumor burden was monitored over time by quantitation of photon emission and tumor volume using a cryogenically cooled CCD camera and magnetic resonance imaging (MRI, respectively. There was excellent correlation (r=0.91 between detected photons and tumor volume. A quantitative comparison of tumor cell kill determined from serial MRI volume measurements and BLI photon counts following 1,3-bis(2-chloroethyl-1-nitrosourea (BCNU treatment revealed that both imaging modalities yielded statistically similar cell kill values (P=.951. These results provide direct validation of BLI imaging as a powerful and quantitative tool for the assessment of antineoplastic therapies in living animals.

  18. The role of the primary care team in the rapid response system.

    Science.gov (United States)

    O'Horo, John C; Sevilla Berrios, Ronaldo A; Elmer, Jennifer L; Velagapudi, Venu; Caples, Sean M; Kashyap, Rahul; Jensen, Jeffrey B

    2015-04-01

    The purpose of the study is to evaluate the impact of primary service involvement on rapid response team (RRT) evaluations. The study is a combination of retrospective chart review and prospective survey-based evaluation. Data included when and where the activations occurred and the patient's code status, primary service, and ultimate disposition. These data were correlated with survey data from each event. A prospective survey evaluated the primary team's involvement in decision making and the overall subjective quality of the interaction with primary service through a visual analog scale. We analyzed 4408 RRTs retrospectively and an additional 135 prospectively. The primary team's involvement by telephone or in person was associated with significantly more transfers to higher care levels in retrospective (P team involvement, with more frequent changes seen in the retrospective analysis (P = .01). Subjective ratings of communication by the RRT leader were significantly higher when the primary service was involved (P team involvement influences RRT activation processes of care. The RRT role should be an adjunct to, but not a substitute for, an engaged and present primary care team. Copyright © 2014 Elsevier Inc. All rights reserved.

  19. A rapid response air quality analysis system for use in projects having stringent quality assurance requirements

    International Nuclear Information System (INIS)

    Bowman, A.W.

    1990-01-01

    This paper describes an approach to solve air quality problems which frequently occur during iterations of the baseline change process. From a schedule standpoint, it is desirable to perform this evaluation in as short a time as possible while budgetary pressures limit the size of the staff available to do the work. Without a method in place to deal with baseline change proposal requests the environment analysts may not be able to produce the analysis results in the time frame expected. Using a concept called the Rapid Response Air Quality Analysis System (RAAS), the problems of timing and cost become tractable. The system could be adapted to assess other atmospheric pathway impacts, e.g., acoustics or visibility. The air quality analysis system used to perform the EA analysis (EA) for the Salt Repository Project (part of the Civilian Radioactive Waste Management Program), and later to evaluate the consequences of proposed baseline changes, consists of three components: Emission source data files; Emission rates contained in spreadsheets; Impact assessment model codes. The spreadsheets contain user-written codes (macros) that calculate emission rates from (1) emission source data (e.g., numbers and locations of sources, detailed operating schedules, and source specifications including horsepower, load factor, and duty cycle); (2) emission factors such as those published by the U.S. Environmental Protection Agency, and (3) control efficiencies

  20. Genetically encoded ratiometric fluorescent thermometer with wide range and rapid response.

    Directory of Open Access Journals (Sweden)

    Masahiro Nakano

    Full Text Available Temperature is a fundamental physical parameter that plays an important role in biological reactions and events. Although thermometers developed previously have been used to investigate several important phenomena, such as heterogeneous temperature distribution in a single living cell and heat generation in mitochondria, the development of a thermometer with a sensitivity over a wide temperature range and rapid response is still desired to quantify temperature change in not only homeotherms but also poikilotherms from the cellular level to in vivo. To overcome the weaknesses of the conventional thermometers, such as a limitation of applicable species and a low temporal resolution, owing to the narrow temperature range of sensitivity and the thermometry method, respectively, we developed a genetically encoded ratiometric fluorescent temperature indicator, gTEMP, by using two fluorescent proteins with different temperature sensitivities. Our thermometric method enabled a fast tracking of the temperature change with a time resolution of 50 ms. We used this method to observe the spatiotemporal temperature change between the cytoplasm and nucleus in cells, and quantified thermogenesis from the mitochondria matrix in a single living cell after stimulation with carbonyl cyanide 4-(trifluoromethoxyphenylhydrazone, which was an uncoupler of oxidative phosphorylation. Moreover, exploiting the wide temperature range of sensitivity from 5°C to 50°C of gTEMP, we monitored the temperature in a living medaka embryo for 15 hours and showed the feasibility of in vivo thermometry in various living species.

  1. The effect of rapid response teams on end-of-life care: A retrospective chart review

    Science.gov (United States)

    Tam, Benjamin; Salib, Mary; Fox-Robichaud, Alison

    2014-01-01

    BACKGROUND: A subset of critically ill patients have end-of-life (EOL) goals that are unclear. Rapid response teams (RRTs) may aid in the identification of these patients and the delivery of their EOL care. OBJECTIVES: To characterize the impact of RRT discussion on EOL care, and to examine how a preprinted order (PPO) set for EOL care influenced EOL discussions and outcomes. METHODS: A single-centre retrospective chart review of all RRT calls (January 2009 to December 2010) was performed. The effect of RRT EOL discussions and the effect of a hospital-wide PPO set on EOL care was examined. Charts were from the Ontario Ministry of Health and Long-Term Care Critical Care Information Systemic database, and were interrogated by two reviewers. RESULTS: In patients whose EOL status changed following RRT EOL discussion, there were fewer intensive care unit (ICU) transfers (8.4% versus 17%; PEOL status following the introduction of an EOL PPO, from 20% (before) to 31% (after) (PEOL status following RRT-led EOL discussion was associated with reduced ICU transfers and enhanced access to palliative care services. Further study is required to identify and deconstruct barriers impairing timely and appropriate EOL discussions. PMID:25299222

  2. Rapid Response of Eastern Mediterranean Deep Sea Microbial Communities to Oil

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Jiang; Techtmann, Stephen M.; Woo, Hannah L.; Ning, Daliang; Fortney, Julian L.; Hazen, Terry C.

    2017-07-18

    Deep marine oil spills like the Deepwater Horizon (DWH) in the Gulf of Mexico have the potential to drastically impact marine systems. Crude oil contamination in marine systems remains a concern, especially for countries around the Mediterranean Sea with off shore oil production. The goal of this study was to investigate the response of indigenous microbial communities to crude oil in the deep Eastern Mediterranean Sea (E. Med.) water column and to minimize potential bias associated with storage and shifts in microbial community structure from sample storage. 16S rRNA amplicon sequencing was combined with GeoChip metagenomic analysis to monitor the microbial community changes to the crude oil and dispersant in on-ship microcosms set up immediately after water collection. After 3 days of incubation at 14 °C, the microbial communities from two different water depths: 824 m and 1210 m became dominated by well-known oil degrading bacteria. The archaeal population and the overall microbial community diversity drastically decreased. Similarly, GeoChip metagenomic analysis revealed a tremendous enrichment of genes related to oil biodegradation, which was consistent with the results from the DWH oil spill. These results highlight a rapid microbial adaption to oil contamination in the deep E. Med., and indicate strong oil biodegradation potentia

  3. Short-term thermal response of rapidly solidified Type 304 stainless steel containing helium

    International Nuclear Information System (INIS)

    Clark, D.E.

    1988-06-01

    Type 304 stainless steel was heat treated for short times near its melting point in order to determine its microstructural response to thermal cycles typical of the near heat-affected zones of welding processes. The material was rapidly solidified as a powder by centrifugal atomization in a helium environment and consolidated by hot extrusion. Along with the ingot metallurgy material used for canning the powder prior to hot extrusion, it was heat treated using a Gleeble at temperatures of 1200 and 1300 degree C for times ranging from <1 to 1000 s, and the samples were examined for microstructure and the existence of porosity due to entrapped helium. At higher test temperatures and longer treatment times, the material developed extensive porosity, which was stabilized by the presence of helium and which may also have a role in anchoring grain boundaries and inhibiting grain growth. The powder material. At lower test temperatures and shorter treatment times, grain growth in the γ phase appeared to be restricted in the powder material, possible by the presence of helium. An intermediate temperatures and times, a γ-δ duplex microstructure also restricted grain growth again occurred in the δ microstructure. 9 refs., 14 figs., 3 tabs

  4. Optical satellite data volcano monitoring: a multi-sensor rapid response system

    Science.gov (United States)

    Duda, Kenneth A.; Ramsey, Michael; Wessels, Rick L.; Dehn, Jonathan

    2009-01-01

    response program described in this chapter also improves the temporal resolution of the ASTER instrument. ASTER has been acquiring images of volcanic eruptions since soon after its launch in December 1999. An early example included the observations of the large pyroclastic flow deposit emplaced at Bezymianny volcano in Kamchatka, Russia. The first images in March 2000, just weeks after the eruption, revealed the extent, composition, and cooling history of this large deposit and of the active lava dome (Ramsey and Dehn, 2004). The initial results from these early datasets spurred interest in using ASTER data for expanded volcano monitoring in the north Pacific. It also gave rise to the multi-year NASA-funded programs of rapid response scheduling and imaging throughout the Aleutian, Kamchatka and Kurile arcs. Since the formal establishment of the programs, the data have provided detailed descriptions of the eruptions of Augustine, Bezymianny, Kliuchevskoi and Sheveluch volcanoes over the past nine years (Wessels et al., in press; Carter et al., 2007, 2008; Ramsey et al., 2008; Rose and Ramsey, 2009). The initial research focus of this rapid response program was specifically on automating the ASTER sensor’s ability for targeted observational scheduling using the expedited data system. This urgent request protocol is one of the unique characteristics of ASTER. It provides a limited number of emergency observations, typically at a much-improved temporal resolution and quicker turnaround with data processing in the United States rather than in Japan. This can speed the reception of the processed data by several days to a week. The ongoing multi-agency research and operational collaboration has been highly successful. AVO serves as the primary source for status information on volcanic activity, working closely with the National Weather Service (NWS), Federal Aviation Administration (FAA), military and other state and federal emergency services. Collaboration with the Russian

  5. Communication and general concern criterion prior to activation of the rapid response team: a grounded theory.

    Science.gov (United States)

    Martland, Jarrad; Chamberlain, Diane; Hutton, Alison; Smigielski, Michael

    2016-11-01

    Objective Patients commonly show signs and symptoms of deterioration for hours or days before cardiorespiratory arrest. Rapid response teams (RRT) were created to improve recognition and response to patient deterioration in these situations. Activation criteria include vital signs or 'general concern' by a clinician or family member. The general concern criterion for RRT activation accounts for nearly one-third of all RRT activity, and although it is well established that communication deficits between staff can contribute to poorer outcomes for patients, there is little evidence pertaining to communication and its effects on the general concern RRT activation. Thus, the aim of the present study was to develop a substantive grounded theory related to the communication process between clinicians that preceded the activation of an RRT when general concern criterion was used. Methods Qualitative grounded theory involved collection of three types of data details namely personal notes from participants in focus groups with white board notes from discussions and audio recordings of the focus groups sessions. Focus groups were conducted with participants exploring issues associated with clinician communication and how it related to the activation of an RRT using the general concern criterion. Results The three main phases of coding (i.e. open, axial and selective coding) analysis identified 322 separate open codes. The strongest theme contributed to a theory of ineffective communication and decreased psychological safety, namely that 'In the absence of effective communication there is a subsequent increase in anxiety, fear or concern that can be directly attributed to the activation of an RRT using the 'general concern' criterion'. The RRT filled cultural and process deficiencies in the compliance with an escalation protocol. Issues such as 'not for resuscitation documentation' and 'inability to establish communication with and between medical or nursing personnel' rated

  6. Expanding the Delivery of Rapid Earthquake Information and Warnings for Response and Recovery

    Science.gov (United States)

    Blanpied, M. L.; McBride, S.; Hardebeck, J.; Michael, A. J.; van der Elst, N.

    2017-12-01

    Scientific organizations like the United States Geological Survey (USGS) release information to support effective responses during an earthquake crisis. Information is delivered to the White House, the National Command Center, the Departments of Defense, Homeland Security (including FEMA), Transportation, Energy, and Interior. Other crucial stakeholders include state officials and decision makers, emergency responders, numerous public and private infrastructure management centers (e.g., highways, railroads and pipelines), the media, and the public. To meet the diverse information requirements of these users, rapid earthquake notifications have been developed to be delivered by e-mail and text message, as well as a suite of earthquake information resources such as ShakeMaps, Did You Feel It?, PAGER impact estimates, and data are delivered via the web. The ShakeAlert earthquake early warning system being developed for the U.S. West Coast will identify and characterize an earthquake a few seconds after it begins, estimate the likely intensity of ground shaking, and deliver brief but critically important warnings to people and infrastructure in harm's way. Currently the USGS is also developing a capability to deliver Operational Earthquake Forecasts (OEF). These provide estimates of potential seismic behavior after large earthquakes and during evolving aftershock sequences. Similar work is underway in New Zealand, Japan, and Italy. In the development of OEF forecasts, social science research conducted during these sequences indicates that aftershock forecasts are valued for a variety of reasons, from informing critical response and recovery decisions to psychologically preparing for more earthquakes. New tools will allow users to customize map-based, spatiotemporal forecasts to their specific needs. Hazard curves and other advanced information will also be available. For such authoritative information to be understood and used during the pressures of an earthquake

  7. Improving Resident Performance Through a Simulated Rapid Response Team: A Pilot Study.

    Science.gov (United States)

    Burke, Peter A; Vest, Michael T; Kher, Hemant; Deutsch, Joseph; Daya, Sneha

    2015-07-01

    The Joint Commission requires hospitals to develop systems in which a team of clinicians can rapidly recognize and respond to changes in a patient's condition. The rapid response team (RRT) concept has been widely adopted as the solution to this mandate. The role of house staff in RRTs and the impact on resident education has been controversial. At Christiana Care Health System, eligible residents in their second through final years lead the RRTs. To evaluate the use of a team-based, interdisciplinary RRT training program for educating and training first-year residents in an effort to improve global RRT performance before residents start their second year. This pilot study was administered in 3 phases. Phase 1 provided residents with classroom-based didactic sessions using case-based RRT scenarios. Multiple choice examinations were administered, as well as a confidence survey based on a Likert scale before and after phase 1 of the program. Phase 2 involved experiential training in which residents engaged as mentored participants in actual RRT calls. A qualitative survey was used to measure perceived program effectiveness after phase 2. In phase 3, led by senior residents, simulated RRTs using medical mannequins were conducted. Participants were divided into 5 teams, in which each resident would rotate in the roles of leader, nurse, and respiratory therapist. This phase measured resident performance with regard to medical decision making, data gathering, and team behaviors during the simulated RRT scenarios. Performance was scored by an attending and a senior resident. A total of 18 residents were eligible (N=18) for participation. The average multiple choice test score improved by 20% after didactic training. The average confidence survey score before training was 3.44 out of 5 (69%) and after training was 4.13 (83%), indicating a 14% improvement. High-quality team behaviors correlated with medical decision making (0.92) more closely than did high-quality data

  8. Rapid evolution of a marsh tidal creek network in response to sea level rise.

    Science.gov (United States)

    Hughes, Z. J.; Fitzgerald, D. M.; Mahadevan, A.; Wilson, C. A.; Pennings, S. C.

    2008-12-01

    In the Santee River Delta (SRD), South Carolina, tidal creeks are extending rapidly onto the marsh platform. A time-series of aerial photographs establishes that these channels were initiated in the 1950's and are headward eroding at a rate of 1.9 m /yr. Short-term trends in sea level show an average relative sea level rise (RSLR) of 4.6 mm/yr over a 20-year tide gauge record from nearby Winyah Bay and Charleston Harbor (1975-1995). Longer-term (85-year) records in Charleston suggest a rate of 3.2 mm/yr. RSLR in the SRD is likely even higher as sediment cores reveal that the marsh is predominantly composed of fine-grained sediment, making it highly susceptible to compaction and subsidence. Furthermore, loss in elevation will have been exacerbated by the decrease in sediment supply due to the damming of the Santee River in 1939. The rapid rate of headward erosion indicates that the marsh platform is in disequilibrium; unable to keep pace with RSLR through accretionary processes and responding to an increased volume and frequency of inundation through the extension of the drainage network. The observed tidal creeks show no sinuosity and a distinctive morphology associated with their young age and biological mediation during their evolution. Feedbacks between tidal flow, vegetation and infauna play a strong role in the morphological development of the creeks. The creek heads are characterized by a region denuded of vegetation, the edges of which are densely populated and burrowed by Uca Pugnax (fiddler crab). Crab burrowing destabilizes sediment, destroys rooting and impacts drainage. Measured infiltration rates are three orders of magnitude higher in the burrowed regions than in a control area (1000 ml/min and 0.6 ml/min respectively). Infiltration of oxygenated water enhances decomposition of organic matter and root biomass is reduced within the creek head (marsh=4.3 kg/m3, head=0.6 kg/m3). These processes lead to the removal and collapse of the soils, producing

  9. Transmitted/Founder Viruses Rapidly Escape from CD8+ T Cell Responses in Acute Hepatitis C Virus Infection.

    Science.gov (United States)

    Bull, Rowena A; Leung, Preston; Gaudieri, Silvana; Deshpande, Pooja; Cameron, Barbara; Walker, Melanie; Chopra, Abha; Lloyd, Andrew R; Luciani, Fabio

    2015-05-01

    The interaction between hepatitis C virus (HCV) and cellular immune responses during very early infection is critical for disease outcome. To date, the impact of antigen-specific cellular immune responses on the evolution of the viral population establishing infection and on potential escape has not been studied. Understanding these early host-virus dynamics is important for the development of a preventative vaccine. Three subjects who were followed longitudinally from the detection of viremia preseroconversion until disease outcome were analyzed. The evolution of transmitted/founder (T/F) viruses was undertaken using deep sequencing. CD8(+) T cell responses were measured via enzyme-linked immunosorbent spot (ELISpot) assay using HLA class I-restricted T/F epitopes. T/F viruses were rapidly extinguished in all subjects associated with either viral clearance (n = 1) or replacement with viral variants leading to establishment of chronic infection (n = 2). CD8(+) T cell responses against 11 T/F epitopes were detectable by 33 to 44 days postinfection, and 5 of these epitopes had not previously been reported. These responses declined rapidly in those who became chronically infected and were maintained in the subject who cleared infection. Higher-magnitude CD8(+) T cell responses were associated with rapid development of immune escape variants at a rate of up to 0.1 per day. Rapid escape from CD8(+) T cell responses has been quantified for the first time in the early phase of primary HCV infection. These rapid escape dynamics were associated with higher-magnitude CD8(+) T cell responses. These findings raise questions regarding optimal selection of immunogens for HCV vaccine development and suggest that detailed analysis of individual epitopes may be required. A major limitation in our detailed understanding of the role of immune response in HCV clearance has been the lack of data on very early primary infection when the transmitted viral variants successfully establish

  10. Vital Signs Predict Rapid-Response Team Activation within Twelve Hours of Emergency Department Admission

    Directory of Open Access Journals (Sweden)

    James M. Walston

    2016-05-01

    Full Text Available Introduction: Rapid-response teams (RRTs are interdisciplinary groups created to rapidly assess and treat patients with unexpected clinical deterioration marked by decline in vital signs. Traditionally emergency department (ED disposition is partially based on the patients’ vital signs (VS at the time of hospital admission. We aimed to identify which patients will have RRT activation within 12 hours of admission based on their ED VS, and if their outcomes differed. Methods: We conducted a case-control study of patients presenting from January 2009 to December 2012 to a tertiary ED who subsequently had RRT activations within 12 hours of admission (early RRT activations. The medical records of patients 18 years and older admitted to a non-intensive care unit (ICU setting were reviewed to obtain VS at the time of ED arrival and departure, age, gender and diagnoses. Controls were matched 1:1 on age, gender, and diagnosis. We evaluated VS using cut points (lowest 10%, middle 80% and highest 10% based on the distribution of VS for all patients. Our study adheres to the STROBE (Strengthening the Reporting of Observational Studies in Epidemiology guidelines for reporting observational studies. Results: A total of 948 patients were included (474 cases and 474 controls. Patients who had RRT activations were more likely to be tachycardic (odds ratio [OR] 2.02, 95% CI [1.25-3.27], tachypneic (OR 2.92, 95% CI [1.73-4.92], and had lower oxygen saturations (OR 2.25, 95% CI [1.42-3.56] upon arrival to the ED. Patients who had RRT activations were more likely to be tachycardic at the time of disposition from the ED (OR 2.76, 95% CI [1.65-4.60], more likely to have extremes of systolic blood pressure (BP (OR 1.72, 95% CI [1.08-2.72] for low BP and OR 1.82, 95% CI [1.19-2.80] for high BP, higher respiratory rate (OR 4.15, 95% CI [2.44-7.07] and lower oxygen saturation (OR 2.29, 95% CI [1.43-3.67]. Early RRT activation was associated with increased healthcare

  11. Vital Signs Predict Rapid-Response Team Activation Within Twelve Hours of Emergency Department Admission.

    Science.gov (United States)

    Walston, James M; Cabrera, Daniel; Bellew, Shawna D; Olive, Marc N; Lohse, Christine M; Bellolio, M Fernanda

    2016-05-01

    Rapid-response teams (RRTs) are interdisciplinary groups created to rapidly assess and treat patients with unexpected clinical deterioration marked by decline in vital signs. Traditionally emergency department (ED) disposition is partially based on the patients' vital signs (VS) at the time of hospital admission. We aimed to identify which patients will have RRT activation within 12 hours of admission based on their ED VS, and if their outcomes differed. We conducted a case-control study of patients presenting from January 2009 to December 2012 to a tertiary ED who subsequently had RRT activations within 12 hours of admission (early RRT activations). The medical records of patients 18 years and older admitted to a non-intensive care unit (ICU) setting were reviewed to obtain VS at the time of ED arrival and departure, age, gender and diagnoses. Controls were matched 1:1 on age, gender, and diagnosis. We evaluated VS using cut points (lowest 10%, middle 80% and highest 10%) based on the distribution of VS for all patients. Our study adheres to the STROBE (Strengthening the Reporting of Observational Studies in Epidemiology) guidelines for reporting observational studies. A total of 948 patients were included (474 cases and 474 controls). Patients who had RRT activations were more likely to be tachycardic (odds ratio [OR] 2.02, 95% CI [1.25-3.27]), tachypneic (OR 2.92, 95% CI [1.73-4.92]), and had lower oxygen saturations (OR 2.25, 95% CI [1.42-3.56]) upon arrival to the ED. Patients who had RRT activations were more likely to be tachycardic at the time of disposition from the ED (OR 2.76, 95% CI [1.65-4.60]), more likely to have extremes of systolic blood pressure (BP) (OR 1.72, 95% CI [1.08-2.72] for low BP and OR 1.82, 95% CI [1.19-2.80] for high BP), higher respiratory rate (OR 4.15, 95% CI [2.44-7.07]) and lower oxygen saturation (OR 2.29, 95% CI [1.43-3.67]). Early RRT activation was associated with increased healthcare utilization and worse outcomes including

  12. UMTS rapid response real-time seismic networks: implementation and strategies at INGV

    Science.gov (United States)

    Govoni, A.; Margheriti, L.; Moretti, M.; Lauciani, V.; Sensale, G.; Bucci, A.; Criscuoli, F.

    2015-12-01

    Universal Mobile Telecommunications System (UMTS) and its evolutions are nowadays the most affordable and widespread data communication infrastructure available almost world wide. Moreover the always growing cellular phone market is pushing the development of new devices with higher performances and lower power consumption. All these characteristics make UMTS really useful for the implementation of an "easy to deploy" temporary real-time seismic station. Despite these remarkable features, there are many drawbacks that must be properly taken in account to effectively transmit the seismic data: Internet security, signal and service availability, power consumption. - Internet security: exposing seismological data services and seismic stations to the Internet is dangerous, attack prone and can lead to downtimes in the services, so we setup a dedicated Virtual Private Network (VPN) service to protect all the connected devices. - Signal and service availability: while for temporary experiment a carefull planning and an accurate site selection can minimize the problem, this is not always the case with rapid response networks. Moreover, as with any other leased line, the availability of the UMTS service during a seismic crisis is basically unpredictable. Nowadays in Italy during a major national emergency a Committee of the Italian Civil Defense ensures unified management and coordination of emergency activities. Inside it the telecom companies are committed to give support to the crisis management improving the standards in their communication networks. - Power consumption: it is at least of the order of that of the seismic station and, being related to data flow and signal quality is largely unpredictable. While the most secure option consists in adding a second independent solar power supply to the seismic station, this is not always a very convenient solution since it doubles the cost and doubles the equipment on site. We found that an acceptable trade-off is to add an

  13. CE: Original research: hospital system barriers to rapid response team activation: a cognitive work analysis.

    Science.gov (United States)

    Braaten, Jane Saucedo

    2015-02-01

    The goal of rapid response team (RRT) activation in acute care facilities is to decrease mortality from preventable complications, but such efforts have been only moderately successful. Although recent research has shown decreased mortality when RRTs are activated more often, many hospitals have low activation rates. This has been linked to various hospital, team, and nursing factors. Yet there is a dearth of research examining how hospital systems shape nurses' behavior with regard to RRT activation. Making systemic constraints visible and modifying them may be the key to improving RRT activation rates and saving more lives. The purpose of this study was to use cognitive work analysis to describe factors within the hospital system that shape medical-surgical nurses' RRT activation behavior. Cognitive work analysis offers a framework for the study of complex sociotechnical systems. This framework was used as the organizing element of the study. Qualitative descriptive design was used to obtain data to fill the framework's five domains: resources, tasks, strategies, social systems, and worker competency. Data were obtained from interviews with 12 medical-surgical nurses and document review. Directed content analysis was used to place the obtained data into the framework's predefined domains. Many system factors affected participants' decisions to activate or not activate an RRT. Systemic constraints, especially in cases of subtle or gradual clinical changes, included a lack of adequate information, the availability of multiple strategies, the need to justify RRT activation, a scarcity of human resources, and informal hierarchical norms in the hospital culture. The most profound constraint was the need to justify the call. Justification was based on the objective or subjective nature of clinical changes, whether the nurse expected to be able to "handle" these changes, the presence or absence of a physician, and whether there was an expectation of support from the RRT

  14. Rapid fluvial aggradation in response to climate change in northwestern Argentina

    Science.gov (United States)

    Wickert, Andrew; Schildgen, Taylor; Strecker, Manfred

    2015-04-01

    River channels near the edge of the northwestern Argentine Andes are rapidly aggrading at present, with preliminary estimates suggesting rates of ~20 cm yr-1. This mirrors cycles of extensive aggradation over the past 100,000 years that formed pronounced fill terraces along regional valley networks and record periods in which in which climate-driven sediment supply overcame uplift-driven river incision (Robinson et al, 2005). Here we use the new SedFlow model (Heimann et al., 2014) to help us understand the causes and spread of aggradation across these basins in the modern system, with the additional eventual goal to better interpret the geologic record. We provide field-derived grain-size distributions, field-measured and remotely-sensed channel widths and valley slopes, and a variety of possible sediment source locations and amounts as inputs to SedFlow, which routes sediment through the fluvial channel network to produce time-evolving predictions of aggradation and incision. We compare these predictions against changes in topography measured by IceSAT (Zwally et al., 2014) and field surveys. We initially test the system response to a series of isolated sediment inputs to observe interactions between tributary systems and the mainstem river. Recent observations indicate that debris-flow induced landslides are important contributors to aggradation in these rivers (Cencetti and Rivelli, 2011). These and other sediment production and transport processes are likely driven by variations in the El Niño Southern Oscillation (ENSO) (Bookhagen and Strecker, 2009). Therefore, we then run SedFlow with sediment inputs distributed across the landscape based on locations where ENSO influences may trigger enhanced landsliding. These model experiments help us towards our end goal of providing a more quantitative basis to interpret field observations of landscape response to changing patterns of precipitation. References: Bookhagen, B. and Strecker, M.: Amazonia: Landscape and

  15. Biotic response to late Quaternary rapid climate switches in Santa Barbara Basin: Ecological and evolutionary implications

    International Nuclear Information System (INIS)

    Cannariato, K.G.; Kennett, J.P.; Behl, R.J.

    1999-01-01

    Benthic foraminiferal assemblages from Santa Barbara Basin exhibit major faunal and ecological switches associated with late Quaternary millennial- to decadal-scale global climate oscillations. Repeated turnovers of entire faunas occurred rapidly (<40--400 yr) without extinction or speciation in conjunction with Dansgaard-Oeschger shifts in thermohaline circulation, ventilation, and climate, confirming evolutionary model predictions of Roy et al. Consistent faunal successions of dysoxic taxa during successive interstadials reflect the extreme sensitivity and adaptation of the benthic ecosystem to the rapid environmental changes that marked the late Quaternary and possibly other transitional intervals in the history of the Earth's ocean-atmosphere-cryosphere system. These data support the hypothesis that broad segments of the biosphere are well adapted to rapid climate change

  16. Using Rapid Improvement Events for Disaster After-Action Reviews: Experience in a Hospital Information Technology Outage and Response.

    Science.gov (United States)

    Little, Charles M; McStay, Christopher; Oeth, Justin; Koehler, April; Bookman, Kelly

    2018-02-01

    The use of after-action reviews (AARs) following major emergency events, such as a disaster, is common and mandated for hospitals and similar organizations. There is a recurrent challenge of identified problems not being resolved and repeated in subsequent events. A process improvement technique called a rapid improvement event (RIE) was used to conduct an AAR following a complete information technology (IT) outage at a large urban hospital. Using RIE methodology to conduct the AAR allowed for the rapid development and implementation of major process improvements to prepare for future IT downtime events. Thus, process improvement methodology, particularly the RIE, is suited for conducting AARs following disasters and holds promise for improving outcomes in emergency management. Little CM , McStay C , Oeth J , Koehler A , Bookman K . Using rapid improvement events for disaster after-action reviews: experience in a hospital information technology outage and response. Prehosp Disaster Med. 2018;33(1):98-100.

  17. Priors engaged in long-latency responses to mechanical perturbations suggest a rapid update in state estimation.

    Directory of Open Access Journals (Sweden)

    Frédéric Crevecoeur

    Full Text Available In every motor task, our brain must handle external forces acting on the body. For example, riding a bike on cobblestones or skating on irregular surface requires us to appropriately respond to external perturbations. In these situations, motor predictions cannot help anticipate the motion of the body induced by external factors, and direct use of delayed sensory feedback will tend to generate instability. Here, we show that to solve this problem the motor system uses a rapid sensory prediction to correct the estimated state of the limb. We used a postural task with mechanical perturbations to address whether sensory predictions were engaged in upper-limb corrective movements. Subjects altered their initial motor response in ∼60 ms, depending on the expected perturbation profile, suggesting the use of an internal model, or prior, in this corrective process. Further, we found trial-to-trial changes in corrective responses indicating a rapid update of these perturbation priors. We used a computational model based on Kalman filtering to show that the response modulation was compatible with a rapid correction of the estimated state engaged in the feedback response. Such a process may allow us to handle external disturbances encountered in virtually every physical activity, which is likely an important feature of skilled motor behaviour.

  18. Regulation of extracellular matrix vesicles via rapid responses to steroid hormones during endochondral bone formation.

    Science.gov (United States)

    Asmussen, Niels; Lin, Zhao; McClure, Michael J; Schwartz, Zvi; Boyan, Barbara D

    2017-12-09

    Endochondral bone formation is a precise and highly ordered process whose exact regulatory framework is still being elucidated. Multiple regulatory pathways are known to be involved. In some cases, regulation impacts gene expression, resulting in changes in chondrocyte phenotypic expression and extracellular matrix synthesis. Rapid regulatory mechanisms are also involved, resulting in release of enzymes, factors and micro RNAs stored in extracellular matrisomes called matrix vesicles. Vitamin D metabolites modulate endochondral development via both genomic and rapid membrane-associated signaling pathways. 1α,25-dihydroxyvitamin D3 [1α,25(OH) 2 D 3 ] acts through the vitamin D receptor (VDR) and a membrane associated receptor, protein disulfide isomerase A3 (PDIA3). 24R,25-dihydroxyvitamin D3 [24R,25(OH) 2 D 3 ] affects primarily chondrocytes in the resting zone (RC) of the growth plate, whereas 1α,25(OH) 2 D 3 affects cells in the prehypertrophic and upper hypertrophic cell zones (GC). This includes genomically directing the cells to produce matrix vesicles with zone specific characteristics. In addition, vitamin D metabolites produced by the cells interact directly with the matrix vesicle membrane via rapid signal transduction pathways, modulating their activity in the matrix. The matrix vesicle payload is able to rapidly impact the extracellular matrix via matrix processing enzymes as well as providing a feedback mechanism to the cells themselves via the contained micro RNAs. Copyright © 2017. Published by Elsevier Inc.

  19. Measurement of amplitude fluctuations in a rapid response photomultiplier; Mesure des fluctuations d'amplitude d'un photo multiplicateur a reponse rapide

    Energy Technology Data Exchange (ETDEWEB)

    Raimbault, P [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

    1961-07-01

    In order to measure amplitude fluctuations in a rapid response photomultiplier, two independent random variables are introduced which determine the shape of the anode pulse. The energy of each pulse, which depends directly on the gain and the variance, is the first variable; amplitude fluctuations, functions of the first variable, depend as well on the pulse width which in turn constitutes the second variable. The results obtained on the variations of the maximum impulse, using a steep-edged pulse broadening circuit, and those obtained on the statistical variations of the gain, are compared to show that the variance relative to the maximum amplitude of the signal is greater than that of the gain. Within the limits of these fluctuations are shown the contribution of the secondary emission coefficient of the first dynode, and that of the mean secondary emission coefficient of the multiplier. (author) [French] Pour etudier les fluctuations d'amplitude d'un photomultiplicateur a reponse rapide, on introduit deux variables aleatoires independantes qui determinent la forme de l'impulsion anodique. L'energie de chaque impulsion, directement fonction du gain et de sa variance, est la premiere variable; les fluctuations d'amplitude, fonctions de la premiere variable, dependent egalement de la largeur de l'impulsion qui, elle, constitue la deuxieme variable. Les resultats obtenus sur les variations de l'amplitude maximale, a l'aide d'un circuit elargisseur d'impulsions a front raide, et les resultats des variations statistiques du gain sont compares pour mettre en evidence le fait que la variance relative a l'amplitude maximale du signal est plus grande que celle du gain. Dans la mesure de ces fluctuations, sont mises en evidence la contribution du coefficient d'emission secondaire de la premiere dynode et celle du coefficient d'emission secondaire moyen du multiplicateur. (auteur)

  20. The business value of demand response for balance responsible parties

    OpenAIRE

    Jonsson, Mattias

    2014-01-01

    By using IT-solutions, the flexibility on the demand side in the electrical systems could be increased. This is called demand response and is part of the larger concept called smart grids. Previous work in this area has concerned the utilization of demand response by grid owners. In this thesis the focus will instead be shifted towards the electrical companies that have balance responsibility, and how they could use demand response in order to make profits. By investigating electrical applian...

  1. Rapid Response Command and Control (R2C2): a systems engineering analysis of scaleable communications for Regional Combatant Commanders

    OpenAIRE

    Sullivan, Lisa; Cannon, Lennard; Reyes, Ronel; Bae, Kitan; Colgary, James; Minerowicz, Nick; Leong, Chris; Lim, Harry; Lim, Hang Sheng; Ng, Chin Chin; Neo, Tiong Tien; Tan, Guan Chye; Ng, Yu Loon; Wong, Eric; Wong, Heng Yue

    2006-01-01

    Includes supplementary material. Disaster relief operations, such as the 2005 Tsunami and Hurricane Katrina, and wartime operations, such as Operation Enduring Freedom and Operation Iraqi Freedom, have identified the need for a standardized command and control system interoperable among Joint, Coalition, and Interagency entities. The Systems Engineering Analysis Cohort 9 (SEA-9) Rapid Response Command and Control (R2C2) integrated project team completed a systems engineering (SE) ...

  2. 20 CFR 665.300 - What are rapid response activities and who is responsible for providing them?

    Science.gov (United States)

    2010-04-01

    ... responsible for providing them? 665.300 Section 665.300 Employees' Benefits EMPLOYMENT AND TRAINING... natural or other disaster resulting in a mass job dislocation. (b) The State is responsible for providing.... The State must establish methods by which to provide additional assistance to local areas that...

  3. Rapid Field Response to a Cluster of Illnesses and Deaths - Sinoe County, Liberia, April-May, 2017.

    Science.gov (United States)

    Doedeh, John; Frimpong, Joseph Asamoah; Yealue, Kwuakuan D M; Wilson, Himiede W; Konway, Youhn; Wiah, Samson Q; Doedeh, Vivian; Bao, Umaru; Seneh, George; Gorwor, Lawrence; Toe, Sylvester; Ghartey, Emmanuel; Larway, Lawrence; Gweh, Dedesco; Gonotee, Philemon; Paasewe, Thomas; Tamatai, George; Yarkeh, James; Smith, Samuel; Brima-Davis, Annette; Dauda, George; Monger, Thomas; Gornor-Pewu, Leleh W; Lombeh, Siafa; Naiene, Jeremias; Dovillie, Nathaniel; Korvayan, Mark; George, Geraldine; Kerwillain, Garrison; Jetoh, Ralph; Friesen, Suzanne; Kinkade, Carl; Katawera, Victoria; Amo-Addae, Maame; George, Roseline N; Gbanya, Miatta Z; Dokubo, E Kainne

    2017-10-27

    On April 25, 2017, the Sinoe County Health Team (CHT) notified the Liberia Ministry of Health (MoH) and the National Public Health Institute of Liberia of an unknown illness among 14 persons that resulted in eight deaths in Sinoe County. On April 26, the National Rapid Response Team and epidemiologists from CDC, the World Health Organization (WHO) and the African Field Epidemiology Network (AFENET) in Liberia were deployed to support the county-led response. Measures were immediately implemented to identify all cases, ascertain the cause of illness, and control the outbreak. Illness was associated with attendance at a funeral event, and laboratory testing confirmed Neisseria meningitidis in biologic specimens from cases. The 2014-2015 Ebola virus disease (Ebola) outbreak in West Africa devastated Liberia's already fragile health system, and it took many months for the country to mount an effective response to control the outbreak. Substantial efforts have been made to strengthen Liberia's health system to prevent, detect, and respond to health threats. The rapid and efficient field response to this outbreak of N. meningitidis resulted in implementation of appropriate steps to prevent a widespread outbreak and reflects improved public health and outbreak response capacity in Liberia.

  4. Repetitive hypoxia rapidly depresses cardio-respiratory responses during active sleep but not quiet sleep in the newborn lamb

    Science.gov (United States)

    Johnston, Renea V; Grant, Daniel A; Wilkinson, Malcolm H; Walker, Adrian M

    1999-01-01

    Arousal from sleep is an important protective response to hypoxia that becomes rapidly depressed in active sleep (AS) when hypoxia is repeated. This study questioned whether there might also be selective depression of cardio-respiratory responses to hypoxia during AS. Nine newborn lambs (7-22 days of age) were studied over three successive nights. The first and third nights were baseline studies (inspired oxygen fraction, Fi,O2= 0.21). During the second night, during every epoch of sleep, lambs were exposed to 60 s episodes of isocapnic hypoxia (Fi,O2= 0.10). During quiet sleep (QS), the probability of arousal in hypoxia exceeded the probability of spontaneous arousal (P ventilatory and blood pressure responses in AS, but not in QS. Selective depression of responses during AS may render the newborn particularly vulnerable to hypoxia in this state. PMID:10457072

  5. Bell palsy in a neonate with rapid response to oral corticosteroids: a case report.

    Science.gov (United States)

    Saini, Arushi; Singhi, Pratibha; Sodhi, K S; Gupta, Ajit

    2013-04-01

    Idiopathic facial nerve palsy, also known as Bell palsy is rare in the neonatal age group. Other more common causes such as birth trauma; infections, especially otitis media; and congenital malformations need to be excluded. We present here a 4-week-old neonate with Bell palsy who responded rapidly to oral corticosteroids. Such an early presentation of idiopathic facial nerve palsy and use of corticosteroids in neonates is scarcely reported in the literature.

  6. The Rapid Disaster Evaluation System (RaDES): A Plan to Improve Global Disaster Response by Privatizing the Assessment Component.

    Science.gov (United States)

    Iserson, Kenneth V

    2017-09-01

    Emergency medicine personnel frequently respond to major disasters. They expect to have an effective and efficient management system to elegantly allocate available resources. Despite claims to the contrary, experience demonstrates this rarely occurs. This article describes privatizing disaster assessment using a single-purposed, accountable, and well-trained organization. The goal is to achieve elegant disaster assessment, rather than repeatedly exhorting existing groups to do it. The Rapid Disaster Evaluation System (RaDES) would quickly and efficiently assess a postdisaster population's needs. It would use an accountable nongovernmental agency's teams with maximal training, mobility, and flexibility. Designed to augment the Inter-Agency Standing Committee's 2015 Emergency Response Preparedness Plan, RaDES would provide the initial information needed to avoid haphazard and overlapping disaster responses. Rapidly deployed teams would gather information from multiple sources and continually communicate those findings to their base, which would then disseminate them to disaster coordinators in a concise, coherent, and transparent way. The RaDES concept represents an elegant, minimally bureaucratic, and effective rapid response to major disasters. However, its implementation faces logistical, funding, and political obstacles. Developing and maintaining RaDES would require significant funding and political commitment to coordinate the numerous agencies that claim to be performing the same tasks. Although simulations can demonstrate efficacy and deficiencies, only field tests will demonstrate RaDES' power to improve interagency coordination and decrease the cost of major disaster response. At the least, the RaDES concept should serve as a model for discussing how to practicably improve our current chaotic disaster responses. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Development of a Rapidly Deployed Department of Energy Emergency Response Element

    International Nuclear Information System (INIS)

    Riland, C.A.; Hopkins, R.C.; Tighe, R.J.

    1999-01-01

    The Federal Radiological Emergency Response Plan (FRERP) directs the Department of Energy (DOE) to maintain a viable, timely, and fully documented response option capable of supporting the responsible Lead Federal Agency in the event of a radiological emergency impacting any state or US territory (e.g., CONUS). In addition, the DOE maintains a response option to support radiological emergencies outside the continental US (OCONUS). While the OCUNUS mission is not governed by the FREP, this response is operationally similar to that assigned to the DOE by the FREP. The DOE is prepared to alert, activate, and deploy radiological response teams to augment the Radiological Assistance Program and/or local responders. The Radiological Monitoring and Assessment Center (RMAC) is a phased response that integrates with the Federal Radiological Monitoring and Assessment Center (FRMAC) in CONUS environments and represents a stand-alone DOE response for OCONUS environments. The FRMAC/RMAC Phase I was formally ''stood up'' as an operational element in April 1999. The FRMAC/RMAC Phase II proposed ''stand-up'' date is midyear 2000

  8. Rapid genetic restoration of a keystone species exhibiting delayed demographic response

    Science.gov (United States)

    Genetic founder effects are often expected when animals colonize restored habitat in fragmented landscapes, but empirical data on genetic responses to restoration are limited. We examined the genetic response of banner-tailed kangaroo rats (Dipodomys spectabilis) to landscape-scale grassland restor...

  9. Rapid feedback responses correlate with reach adaptation and properties of novel upper limb loads.

    Science.gov (United States)

    Cluff, Tyler; Scott, Stephen H

    2013-10-02

    A hallmark of voluntary motor control is the ability to adjust motor patterns for novel mechanical or visuomotor contexts. Recent work has also highlighted the importance of feedback for voluntary control, leading to the hypothesis that feedback responses should adapt when we learn new motor skills. We tested this prediction with a novel paradigm requiring that human subjects adapt to a viscous elbow load while reaching to three targets. Target 1 required combined shoulder and elbow motion, target 2 required only elbow motion, and target 3 (probe target) required shoulder but no elbow motion. This simple approach controlled muscle activity at the probe target before, during, and after the application of novel elbow loads. Our paradigm allowed us to perturb the elbow during reaching movements to the probe target and identify several key properties of adapted stretch responses. Adapted long-latency responses expressed (de-) adaptation similar to reaching errors observed when we introduced (removed) the elbow load. Moreover, reaching errors during learning correlated with changes in the long-latency response, showing subjects who adapted more to the elbow load displayed greater modulation of their stretch responses. These adapted responses were sensitive to the size and direction of the viscous training load. Our results highlight an important link between the adaptation of feedforward and feedback control and suggest a key part of motor adaptation is to adjust feedback responses to the requirements of novel motor skills.

  10. Diurnal variation in the performance of rapid response systems: the role of critical care services-a review article.

    Science.gov (United States)

    Sundararajan, Krishnaswamy; Flabouris, Arthas; Thompson, Campbell

    2016-01-01

    The type of medical review before an adverse event influences patient outcome. Delays in the up-transfer of patients requiring intensive care are associated with higher mortality rates. Timely detection and response to a deteriorating patient constitute an important function of the rapid response system (RRS). The activation of the RRS for at-risk patients constitutes the system's afferent limb. Afferent limb failure (ALF), an important performance measure of rapid response systems, constitutes a failure to activate a rapid response team (RRT) despite criteria for calling an RRT. There are diurnal variations in hospital staffing levels, the performance of rapid response systems and patient outcomes. Fewer ward-based nursing staff at night may contribute to ALF. The diurnal variability in RRS activity is greater in unmonitored units than it is in monitored units for events that should result in a call for an RRT. RRT events include a significant abnormality in either the pulse rate, blood pressure, conscious state or respiratory rate. There is also diurnal variation in RRT summoning rates, with most activations occurring during the day. The reasons for this variation are mostly speculative, but the failure of the afferent limb of RRT activation, particularly at night, may be a factor. The term "circadian variation/rhythm" applies to physiological variations over a 24-h cycle. In contrast, diurnal variation applies more accurately to extrinsic systems. Circadian rhythm has been demonstrated in a multitude of bodily functions and disease states. For example, there is an association between disrupted circadian rhythms and abnormal vital parameters such as anomalous blood pressure, irregular pulse rate, aberrant endothelial function, myocardial infarction, stroke, sleep-disordered breathing and its long-term consequences of hypertension, heart failure and cognitive impairment. Therefore, diurnal variation in patient outcomes may be extrinsic, and more easily modifiable

  11. Data for Macrophyte Community Response to Nitrogen Loading and Thermal Stressors in Rapidly Flushed Mesocosm Systems

    Data.gov (United States)

    U.S. Environmental Protection Agency — Data represent response variables from a series of mesocosm experiments to assess how estuarine macrophyte communities respond to nitrogen loading under two...

  12. Rapid and widely disseminated acute phase protein response after experimental bacterial infection of pigs

    DEFF Research Database (Denmark)

    Skovgaard, Kerstin; Mortensen, Shila; Boye, Mette

    2009-01-01

    The acute phase protein response is a well-described generalized early host response to tissue injury, inflammation and infection, observed as pronounced changes in the concentrations of a number of circulating serum proteins. The biological function of this response and its interplay with other...... parts of innate host defence reactions remain somewhat elusive. In order to gain new insight into this early host defence response in the context of bacterial infection we studied gene expression changes in peripheral lymphoid tissues as compared to hepatic expression changes, 14-18 h after lung...... with measurements of interleukin-6 and selected acute phase proteins in serum. C-reactive protein and serum amyloid A were clearly induced 14-18 h after infection. Extrahepatic expression of acute phase proteins was found to be dramatically altered as a result of the lung infection with an extrahepatic acute phase...

  13. Efficient 3D frequency response modeling with spectral accuracy by the rapid expansion method

    KAUST Repository

    Chu, Chunlei; Stoffa, Paul L.

    2012-01-01

    Frequency responses of seismic wave propagation can be obtained either by directly solving the frequency domain wave equations or by transforming the time domain wavefields using the Fourier transform. The former approach requires solving systems

  14. The Deployable Operations Group: A Model for a National Unified Interagency Rapid Response Command

    National Research Council Canada - National Science Library

    Cooper, Eric M

    2008-01-01

    The Department of Homeland Security (DHS) was created after the attacks on September 11, 2001 to consolidate all the domestic agencies responsible for protecting America's borders and national infrastructure under a single department...

  15. A study of response time of pitot pressure probes designed for rapid response and protection of transducer

    Science.gov (United States)

    Moore, J. A.

    1979-01-01

    An eight orifice probe, designed to protect the transducer without the use of a baffle, was compared to a standard orifice-baffle probe in the small shock tube and in the expansion tube under normal run conditions. In both facilities, the response time of eight orifice probe was considerable better than the standard probe design.

  16. Cardiac and respiratory responses of rainbow trout, bluegills and brown bullhead catfish during rapid hypoxia and recovery under normoxic conditions

    Energy Technology Data Exchange (ETDEWEB)

    Marvin, Jr, D E; Burton, D T

    1973-01-01

    Heart rate, ventilation rate and routine oxygen consumption were measured in Salmo gairdneri, Lepomis macrochirus and Ictalurus nebulosus during rapid hypoxic stress and recovery under normoxic conditions. Cardiac and respiratory responses during hypoxia were similar to those reported in the literature for teleost fish. Immediate increases in heart rate and ventilation rate occurred in all three species after stress. When the mean heart rate for each species at 1 hr post-stress was compared with its pre-stress rate, differences in recovery patterns were found in all species. During recovery from hypoxia, rapid increases in oxygen consumption, above pre-stress levels, occurred in S. gairdneri and L. macrochirus. No significant differences between pre-stress and post-stress values were found in I. nebulosus.

  17. Low Cost Rapid Response Spacecraft, (LCRRS): A Research Project in Low Cost Spacecraft Design and Fabrication in a Rapid Prototyping Environment

    Science.gov (United States)

    Spremo, Stevan; Bregman, Jesse; Dallara, Christopher D.; Ghassemieh, Shakib M.; Hanratty, James; Jackson, Evan; Kitts, Christopher; Klupar, Pete; Lindsay, Michael; Ignacio, Mas; hide

    2009-01-01

    The Low Cost Rapid Response Spacecraft (LCRRS) is an ongoing research development project at NASA Ames Research Center (ARC), Moffett Field, California. The prototype spacecraft, called Cost Optimized Test for Spacecraft Avionics and Technologies (COTSAT) is the first of what could potentially be a series of rapidly produced low-cost satellites. COTSAT has a target launch date of March 2009 on a SpaceX Falcon 9 launch vehicle. The LCRRS research system design incorporates use of COTS (Commercial Off The Shelf), MOTS (Modified Off The Shelf), and GOTS (Government Off The Shelf) hardware for a remote sensing satellite. The design concept was baselined to support a 0.5 meter Ritchey-Chretien telescope payload. This telescope and camera system is expected to achieve 1.5 meter/pixel resolution. The COTSAT team is investigating the possibility of building a fully functional spacecraft for $500,000 parts and $2,000,000 labor. Cost is dramatically reduced by using a sealed container, housing the bus and payload subsystems. Some electrical and RF designs were improved/upgraded from GeneSat-1 heritage systems. The project began in January 2007 and has yielded two functional test platforms. It is expected that a flight-qualified unit will be finished in December 2008. Flight quality controls are in place on the parts and materials used in this development with the aim of using them to finish a proto-flight satellite. For LEO missions the team is targeting a mission class requiring a minimum of six months lifetime or more. The system architecture incorporates several design features required by high reliability missions. This allows for a true skunk works environment to rapidly progress toward a flight design. Engineering and fabrication is primarily done in-house at NASA Ames with flight certifications on materials. The team currently employs seven Full Time Equivalent employees. The success of COTSATs small team in this effort can be attributed to highly cross trained

  18. Logarithmic superposition of force response with rapid length changes in relaxed porcine airway smooth muscle.

    Science.gov (United States)

    Ijpma, G; Al-Jumaily, A M; Cairns, S P; Sieck, G C

    2010-12-01

    We present a systematic quantitative analysis of power-law force relaxation and investigate logarithmic superposition of force response in relaxed porcine airway smooth muscle (ASM) strips in vitro. The term logarithmic superposition describes linear superposition on a logarithmic scale, which is equivalent to multiplication on a linear scale. Additionally, we examine whether the dynamic response of contracted and relaxed muscles is dominated by cross-bridge cycling or passive dynamics. The study shows the following main findings. For relaxed ASM, the force response to length steps of varying amplitude (0.25-4% of reference length, both lengthening and shortening) are well-fitted with power-law functions over several decades of time (10⁻² to 10³ s), and the force response after consecutive length changes is more accurately fitted assuming logarithmic superposition rather than linear superposition. Furthermore, for sinusoidal length oscillations in contracted and relaxed muscles, increasing the oscillation amplitude induces greater hysteresivity and asymmetry of force-length relationships, whereas increasing the frequency dampens hysteresivity but increases asymmetry. We conclude that logarithmic superposition is an important feature of relaxed ASM, which may facilitate a more accurate prediction of force responses in the continuous dynamic environment of the respiratory system. In addition, the single power-function response to length changes shows that the dynamics of cross-bridge cycling can be ignored in relaxed muscle. The similarity in response between relaxed and contracted states implies that the investigated passive dynamics play an important role in both states and should be taken into account.

  19. Evolution and behavioural responses to human-induced rapid environmental change.

    Science.gov (United States)

    Sih, Andrew; Ferrari, Maud C O; Harris, David J

    2011-03-01

    Almost all organisms live in environments that have been altered, to some degree, by human activities. Because behaviour mediates interactions between an individual and its environment, the ability of organisms to behave appropriately under these new conditions is crucial for determining their immediate success or failure in these modified environments. While hundreds of species are suffering dramatically from these environmental changes, others, such as urbanized and pest species, are doing better than ever. Our goal is to provide insights into explaining such variation. We first summarize the responses of some species to novel situations, including novel risks and resources, habitat loss/fragmentation, pollutants and climate change. Using a sensory ecology approach, we present a mechanistic framework for predicting variation in behavioural responses to environmental change, drawing from models of decision-making processes and an understanding of the selective background against which they evolved. Where immediate behavioural responses are inadequate, learning or evolutionary adaptation may prove useful, although these mechanisms are also constrained by evolutionary history. Although predicting the responses of species to environmental change is difficult, we highlight the need for a better understanding of the role of evolutionary history in shaping individuals' responses to their environment and provide suggestion for future work.

  20. Polar bear and walrus response to the rapid decline in Arctic sea ice

    Science.gov (United States)

    Oakley, K.; Whalen, M.; Douglas, David C.; Udevitz, Mark S.; Atwood, Todd C.; Jay, C.

    2012-01-01

    The Arctic is warming faster than other regions of the world due to positive climate feedbacks associated with loss of snow and ice. One highly visible consequence has been a rapid decline in Arctic sea ice over the past 3 decades - a decline projected to continue and result in ice-free summers likely as soon as 2030. The polar bear (Ursus maritimus) and the Pacific walrus (Odobenus rosmarus divergens) are dependent on sea ice over the continental shelves of the Arctic Ocean's marginal seas. The continental shelves are shallow regions with high biological productivity, supporting abundant marine life within the water column and on the sea floor. Polar bears use sea ice as a platform for hunting ice seals; walruses use sea ice as a resting platform between dives to forage for clams and other bottom-dwelling invertebrates. How have sea ice changes affected polar bears and walruses? How will anticipated changes affect them in the future?

  1. The emergence of pan-resistant Gram-negative pathogens merits a rapid global political response.

    Science.gov (United States)

    Walsh, Timothy R; Toleman, Mark A

    2012-01-01

    Recent media coverage of New Delhi metallo-β-lactamase (NDM-1) put antibiotic resistance back on the political map if only for the wrong reasons, mainly the reaction to the naming of NDM-1 and the incorrect assumption that medical tourism was being deliberately targeted. However, work on NDM-1 has most certainly highlighted the rapid dissemination of new antibiotic resistance mechanisms via economic globalization. The example of NDM-1 has also magnified the desperate need for a publicly funded global antibiotic surveillance system rather than just national or regional systems. Furthermore, there is a pressing need to establish a global task force to enforce international transparency and accountability on antibiotic stewardship and the implementation of measures to curb antibiotic resistance. An international antibiotic stewardship index should be established that is related to each country's gross domestic product (GDP) and assesses how much of their GDP is committed to publically funded health initiatives aimed at controlling antibiotic resistance.

  2. A replicated climate change field experiment reveals rapid evolutionary response in an ecologically important soil invertebrate

    DEFF Research Database (Denmark)

    Bataillon, Thomas; Galtier, Nicolas; Bernard, Aurelien

    2016-01-01

    to climate change in a common annelid worm using a controlled replicated experiment where climatic conditions were manipulated in a natural setting. Analyzing the transcribed genome of 15 local populations, we found that about 12% of the genetic polymorphisms exhibit differences in allele frequencies......Whether species can respond evolutionarily to current climate change is crucial for the persistence of many species. Yet, very few studies have examined genetic responses to climate change in manipulated experiments carried out innatural field conditions. We examined the evolutionary response...... associated to changes in soil temperature and soil moisture. This shows an evolutionaryresponse to realistic climate change happening over short-time scale, and calls for incorporating evolution into modelspredicting future response of species to climate change. It also shows that designed climate change...

  3. The dynamic pressure response to rapid dilatation of the resting urethra in healthy women

    DEFF Research Database (Denmark)

    Bagi, P; Thind, P; Colstrup, H

    1993-01-01

    beta e-t/tau beta, where Pequ, P alpha and P beta are constants, and tau alpha and tau beta are time constants; this equation has previously been demonstrated to describe the pressure decay following dilatation. On the basis of a theoretical model the elastic and viscous constants for the urethral......The urethral pressure response to a sudden forced dilatation was studied at the bladder neck, in the high-pressure zone and in the distal urethra in ten healthy female volunteers. The pressure response was fitted with a double exponential function of the form Pt = Pequ + P alpha e-t/tau alpha + P...... a detailed assessment of static and dynamic urethral responses to dilatation which can be applied as an experimental simulation of urine ingression, and is therefore presumed to be of value in the evaluation of normal and pathological urethral sphincter function....

  4. Rapidly Responsive and Flexible Chiral Nematic Cellulose Nanocrystal Composites as Multifunctional Rewritable Photonic Papers with Eco-Friendly Inks.

    Science.gov (United States)

    Wan, Hao; Li, Xiaofeng; Zhang, Liang; Li, Xiaopeng; Liu, Pengfei; Jiang, Zhiguo; Yu, Zhong-Zhen

    2018-02-14

    Rapidly responsive and flexible photonic papers are manufactured by coassembly of cellulose nanocrystals (CNCs) and waterborne polyurethane (WPU) latex for fully taking advantage of the chiral nematic structure of CNCs and the flexibility of WPU elastomer. The resulting CNC/WPU composite papers exhibit not only tunable iridescent colors by adjusting the helical pitch size, but also instant optical responses to water and wet gas, ascribed to the easy chain movement of the elastomeric WPU that does not restrict the fast water absorption-induced swelling of CNCs. By choosing water or NaCl aqueous solutions as inks, the colorful patterns on the CNC/WPU photonic paper can be made temporary, durable, or even disguisable. In addition, the photonic paper is simultaneously rewritable for all these three types of patterns, and the disguisable patterns, which are invisible at normal times and show up under stimuli, exhibit a quick reveal conversion just by exhaling on the paper. The rewritability, rapid responsibility, easy fabrication, and the eco-friendly nature of the inks make the flexible photonic paper/ink combination highly promising in sensors, displays, and photonic circuits.

  5. Human annoyance, acceptability and concern as responses to vibration from the construction of Light Rapid Transit lines in residential environments

    Energy Technology Data Exchange (ETDEWEB)

    Wong-McSweeney, D., E-mail: D.B.C.WongMcSweeney@salford.ac.uk [Acoustics Research Centre, University of Salford, Salford M5 4TW (United Kingdom); Woodcock, J.S.; Peris, E.; Waddington, D.C.; Moorhouse, A.T. [Acoustics Research Centre, University of Salford, Salford M5 4TW (United Kingdom); Redel-Macías, M.D. [Dep. Rural Engineering Campus de Rabanales, University of Córdoba, Córdoba (Spain)

    2016-10-15

    The aim of this paper is to investigate the use of different self-reported measures for assessing the human response to environmental vibration from the construction of an urban LRT (Light Rapid Transit) system. The human response to environmental stressors such as vibration and noise is often expressed in terms of exposure–response relationships that describe annoyance as a function of the magnitude of the vibration. These relationships are often the basis of noise and vibration policy and the setting of limit values. This paper examines measures other than annoyance by expressing exposure–response relationships for vibration in terms of self-reported concern about property damage and acceptability. The exposure–response relationships for concern about property damage and for acceptability are then compared with those for annoyance. It is shown that concern about property damage occurs at vibration levels well below those where there is any risk of damage. Earlier research indicated that concern for damage is an important moderator of the annoyance induced. Acceptability, on the other hand, might be influenced by both annoyance and concern, as well as by other considerations. It is concluded that exposure–response relationships expressing acceptability as a function of vibration exposure could usefully complement existing relationships for annoyance in future policy decisions regarding environmental vibration. The results presented in this paper are derived from data collected through a socio-vibration survey (N = 321) conducted for the construction of an urban LRT in the United Kingdom. - Highlights: • The human response to construction vibration is assessed in residential environments. • Exposure–response relationships are generated based on survey and semi-empirical vibration estimation. • Annoyance, concern and acceptability are compared as response measures. • Concern and acceptability are viable measures complementing annoyance.

  6. Lumped Parameter Modeling for Rapid Vibration Response Prototyping and Test Correlation for Electronic Units

    Science.gov (United States)

    Van Dyke, Michael B.

    2013-01-01

    Present preliminary work using lumped parameter models to approximate dynamic response of electronic units to random vibration; Derive a general N-DOF model for application to electronic units; Illustrate parametric influence of model parameters; Implication of coupled dynamics for unit/board design; Demonstrate use of model to infer printed wiring board (PWB) dynamics from external chassis test measurement.

  7. Similar rapid response to phytodetritus deposition in shallow and deep-sea sediments

    NARCIS (Netherlands)

    Moodley, L.; Middelburg, J.J.; Soetaert, K.E.R.; Boschker, H.T.S.; Herman, P.M.J.; Heip, C.H.R.

    2005-01-01

    The short-term benthic response to an input of fresh organic matter was examined in vastly contrasting benthic environments (estuarine intertidal to deep-sea) using 13C-labeled diatoms as a tracer of labile carbon. Benthic processing was assessed in major compartments through 13C-enrichment in CO2,

  8. Three dimensional evaluation of alveolar bone changes in response to different rapid palatal expansion activation rates

    Directory of Open Access Journals (Sweden)

    Brian LaBlonde

    Full Text Available ABSTRACT Introduction: The aim of this multi-center retrospective study was to quantify the changes in alveolar bone height and thickness after using two different rapid palatal expansion (RPE activation protocols, and to determine whether a more rapid rate of expansion is likely to cause more adverse effects, such as alveolar tipping, dental tipping, fenestration and dehiscence of anchorage teeth. Methods: The sample consisted of pre- and post-expansion records from 40 subjects (age 8-15 years who underwent RPE using a 4-banded Hyrax appliance as part of their orthodontic treatment to correct posterior buccal crossbites. Subjects were divided into two groups according to their RPE activation rates (0.5 mm/day and 0.8 mm/day; n = 20 each group. Three-dimensional images for all included subjects were evaluated using Dolphin Imaging Software 11.7 Premium. Maxillary base width, buccal and palatal cortical bone thickness, alveolar bone height, and root angulation and length were measured. Significance of the changes in the measurements was evaluated using Wilcoxon signed-rank test and comparisons between groups were done using ANOVA. Significance was defined at p ≤ 0.05. Results: RPE activation rates of 0.5 mm per day (Group 1 and 0.8 mm per day (Group 2 caused significant increase in arch width following treatment; however, Group 2 showed greater increases compared to Group 1 (p < 0.01. Buccal alveolar height and width decreased significantly in both groups. Both treatment protocols resulted in significant increases in buccal-lingual angulation of teeth; however, Group 2 showed greater increases compared to Group 1 (p < 0.01. Conclusion: Both activation rates are associated with significant increase in intra-arch widths. However, 0.8 mm/day resulted in greater increases. The 0.8 mm/day activation rate also resulted in more increased dental tipping and decreased buccal alveolar bone thickness over 0.5 mm/day.

  9. Peptide fragments induce a more rapid immune response than intact proteins in earthworms.

    Science.gov (United States)

    Hanusová, R; Tucková, L; Halada, P; Bezouska, K; Bilej, M

    1999-01-01

    The effect of in vivo proteolytic processing of protein antigen was studied in Eisenia foetida earthworms. Parenteral administration of the protein antigen induces elevated levels of an antigen-binding protein (ABP) which recognizes the protein used for stimulation. When the protein antigen is administered simultaneously with nontoxic serine proteinase inhibitor, ABP levels remain close to background. On the other hand, the in vivo adaptive response of earthworms to peptide fragments obtained by coelomic fluid digestion of the foreign antigen occurs even in the presence of proteinase inhibitor and, moreover, is significantly faster as compared to the response to intact antigen. These findings confirm the role of proteolytic processing in earthworms. MALDI mass spectrometric analysis of the fragments after coelomic fluid digestion has revealed the presence of the peptide fragments with molecular weights in the mass range 700-1100 Da.

  10. RAPID RESCUE: BREAKING THE MOLD OF ROUTINE CONTINGENCY RESPONSE FOR PERSONNEL RECOVERY

    Science.gov (United States)

    2016-10-23

    ultimately lead to timelier response and greater economy of force for an already critically strained Air Force core function. 1 INTRODUCTION...demographics, with a focus on the emerging near-peer powers such as Russia and Iran .9 Additionally, an important observation is made in that the DOD has...achieve economy of force. When an OPLAN calls for PR, a capability is requested rather than individual unit. The existing UTCs are too rigid and

  11. Irradiation response in titanium modified austenitic stainless steels prepared by rapid solidification processing. Pt. 3

    International Nuclear Information System (INIS)

    Imeson, D.; Tong, C.H.; Parker, C.A.; Vander Sande, J.B.; Grant, N.J.; Harling, O.K.; Massachusetts Inst. of Tech., Cambridge

    1984-01-01

    Titanium carbide precipitation on dislocations during irradiation and recoil-induced particle dissolution are considered. The outline analysis given indicates that complete swelling suppression may occur in favorable conditions due to a counterbalancing of the effective dislocation interstitial bias. The behavior is, however, not stable against a return to normal swelling levels for type 316 steels. A model is presented which may serve as a basis for the interpretation of some aspects of the irradiation response in this system. (orig.)

  12. The neural response properties and cortical organization of a rapidly adapting muscle sensory group response that overlaps with the frequencies that elicit the kinesthetic illusion.

    Science.gov (United States)

    Marasco, Paul D; Bourbeau, Dennis J; Shell, Courtney E; Granja-Vazquez, Rafael; Ina, Jason G

    2017-01-01

    Kinesthesia is the sense of limb movement. It is fundamental to efficient motor control, yet its neurophysiological components remain poorly understood. The contributions of primary muscle spindles and cutaneous afferents to the kinesthetic sense have been well studied; however, potential contributions from muscle sensory group responses that are different than the muscle spindles have not been ruled out. Electrophysiological recordings in peripheral nerves and brains of male Sprague Dawley rats with a degloved forelimb preparation provide evidence of a rapidly adapting muscle sensory group response that overlaps with vibratory inputs known to generate illusionary perceptions of limb movement in humans (kinesthetic illusion). This group was characteristically distinct from type Ia muscle spindle fibers, the receptor historically attributed to limb movement sensation, suggesting that type Ia muscle spindle fibers may not be the sole carrier of kinesthetic information. The sensory-neural structure of muscles is complex and there are a number of possible sources for this response group; with Golgi tendon organs being the most likely candidate. The rapidly adapting muscle sensory group response projected to proprioceptive brain regions, the rodent homolog of cortical area 3a and the second somatosensory area (S2), with similar adaption and frequency response profiles between the brain and peripheral nerves. Their representational organization was muscle-specific (myocentric) and magnified for proximal and multi-articulate limb joints. Projection to proprioceptive brain areas, myocentric representational magnification of muscles prone to movement error, overlap with illusionary vibrational input, and resonant frequencies of volitional motor unit contraction suggest that this group response may be involved with limb movement processing.

  13. The neural response properties and cortical organization of a rapidly adapting muscle sensory group response that overlaps with the frequencies that elicit the kinesthetic illusion.

    Directory of Open Access Journals (Sweden)

    Paul D Marasco

    Full Text Available Kinesthesia is the sense of limb movement. It is fundamental to efficient motor control, yet its neurophysiological components remain poorly understood. The contributions of primary muscle spindles and cutaneous afferents to the kinesthetic sense have been well studied; however, potential contributions from muscle sensory group responses that are different than the muscle spindles have not been ruled out. Electrophysiological recordings in peripheral nerves and brains of male Sprague Dawley rats with a degloved forelimb preparation provide evidence of a rapidly adapting muscle sensory group response that overlaps with vibratory inputs known to generate illusionary perceptions of limb movement in humans (kinesthetic illusion. This group was characteristically distinct from type Ia muscle spindle fibers, the receptor historically attributed to limb movement sensation, suggesting that type Ia muscle spindle fibers may not be the sole carrier of kinesthetic information. The sensory-neural structure of muscles is complex and there are a number of possible sources for this response group; with Golgi tendon organs being the most likely candidate. The rapidly adapting muscle sensory group response projected to proprioceptive brain regions, the rodent homolog of cortical area 3a and the second somatosensory area (S2, with similar adaption and frequency response profiles between the brain and peripheral nerves. Their representational organization was muscle-specific (myocentric and magnified for proximal and multi-articulate limb joints. Projection to proprioceptive brain areas, myocentric representational magnification of muscles prone to movement error, overlap with illusionary vibrational input, and resonant frequencies of volitional motor unit contraction suggest that this group response may be involved with limb movement processing.

  14. The Infrared Camera for RATIR, a Rapid Response GRB Followup Instrument

    Science.gov (United States)

    Rapchun, David A.; Alardin, W.; Bigelow, B. C.; Bloom, J.; Butler, N.; Farah, A.; Fox, O. D.; Gehrels, N.; Gonzalez, J.; Klein, C.; Kutyrev, A. S.; Lotkin, G.; Morisset, C.; Moseley, S. H.; Richer, M.; Robinson, F. D.; Samuel, M. V.; Sparr, L. M.; Tucker, C.; Watson, A.

    2011-01-01

    RATIR (Reionization and Transients Infrared instrument) will be a hybrid optical/near IR imager that will utilize the "J-band dropout" to rapidly identify very high redshift (VHR) gamma-ray bursts (GRBs) from a sample of all observable Swift bursts. Our group at GSFC is developing the instrument in collaboration with UC Berkeley (UCB) and University of Mexico (UNAM). RATIR has both a visible and IR camera, which give it access to 8 bands spanning visible and IR wavelengths. The instrument implements a combination of filters and dichroics to provide the capability of performing photometry in 4 bands simultaneously. The GSFC group leads the design and construction of the instrument's IR camera, equipped with two HgCdTe 2k x 2k Teledyne detectors. The cryostat housing these detectors is cooled by a mechanical cryo-compressor, which allows uninterrupted operation on the telescope. The host 1.5-m telescope, located at the UNAM San Pedro Martir Observatory, Mexico, has recently undergone robotization, allowing for fully automated, continuous operation. After commissioning in the spring of 2011, RATIR will dedicate its time to obtaining prompt follow-up observations of GRBs and identifying VHR GRBs, thereby providing a valuable tool for studying the epoch of reionization.

  15. Evidence of Rapid Modulation by Social Information of Subjective, Physiological, and Neural Responses to Emotional Expressions.

    Science.gov (United States)

    Mermillod, Martial; Grynberg, Delphine; Pio-Lopez, Léo; Rychlowska, Magdalena; Beffara, Brice; Harquel, Sylvain; Vermeulen, Nicolas; Niedenthal, Paula M; Dutheil, Frédéric; Droit-Volet, Sylvie

    2017-01-01

    Recent research suggests that conceptual or emotional factors could influence the perceptual processing of stimuli. In this article, we aimed to evaluate the effect of social information (positive, negative, or no information related to the character of the target) on subjective (perceived and felt valence and arousal), physiological (facial mimicry) as well as on neural (P100 and N170) responses to dynamic emotional facial expressions (EFE) that varied from neutral to one of the six basic emotions. Across three studies, the results showed reduced ratings of valence and arousal of EFE associated with incongruent social information (Study 1), increased electromyographical responses (Study 2), and significant modulation of P100 and N170 components (Study 3) when EFE were associated with social (positive and negative) information (vs. no information). These studies revealed that positive or negative social information reduces subjective responses to incongruent EFE and produces a similar neural and physiological boost of the early perceptual processing of EFE irrespective of their congruency. In conclusion, the article suggests that the presence of positive or negative social context modulates early physiological and neural activity preceding subsequent behavior.

  16. Fast-responsive hydrogel as an injectable pump for rapid on-demand fluidic flow control.

    Science.gov (United States)

    Luo, Rongcong; Dinh, Ngoc-Duy; Chen, Chia-Hung

    2017-05-01

    Chemically synthesized functional hydrogels have been recognized as optimized soft pumps for on-demand fluidic regulation in micro-systems. However, the challenges regarding the slow responses of hydrogels have very much limited their application in effective fluidic flow control. In this study, a heterobifunctional crosslinker (4-hydroxybutyl acrylate)-enabled two-step hydrothermal phase separation process for preparing a highly porous hydrogel with fast response dynamics was investigated for the fabrication of novel microfluidic functional units, such as injectable valves and pumps. The cylinder-shaped hydrogel, with a diameter of 9 cm and a height of 2.5 cm at 25 °C, achieved a size reduction of approximately 70% in less than 30 s after the hydrogels were heated at 40 °C. By incorporating polypyrrole nanoparticles as photothermal transducers, a photo-responsive composite hydrogel was approached and exhibited a remotely triggerable fluidic regulation and pumping ability to generate significant flows, showing on-demand water-in-oil droplet generation by laser switching, whereby the droplet size could be tuned by adjusting the laser intensity and irradiation period with programmable manipulation.

  17. Rapid maize leaf and immature ear responses to UV-B radiation

    International Nuclear Information System (INIS)

    Casati, P.; Morrow, D.; Fernandes, J.; Walbot, V.

    2011-01-01

    Plants have evolved adaptations to environmental factors, including solar radiation. In addition to acting as a developmental and physiological signal, UV-B photons also cause cellular damage. Elevated UV-B radiation has pleiotropic effects on plant development, morphology, and physiology, but the regulation of systemic responses is not well-understood. To gain a better understanding of the initial events in UV-B acclimation, we have analyzed a 10min to 1h time course of transcriptome responses in irradiated and shielded leaves, and immature maize ears to unravel the systemic physiological and developmental responses in exposed and shielded organs. To identify metabolites as possible signaling molecules, we looked for compounds that increased within 5-90 min in both irradiated and shielded leaves, to explain the kinetics of profound transcript changes within 1h. We found that myoinositol is one such candidate metabolite, and it also has support from RNA profiling: after 1h UV-B, transcripts for myoinositol-1-phosphate synthase, are decreased in both irradiated and shielded leaves suggesting down-regulation of biogenesis. We also demonstrate that if 0.1mM myoinositol is applied to leaves of greenhouse maize, some metabolites that are changed by UV-B are also changed similarly by the chemical treatment. (author)

  18. Evidence of Rapid Modulation by Social Information of Subjective, Physiological, and Neural Responses to Emotional Expressions

    Directory of Open Access Journals (Sweden)

    Martial Mermillod

    2018-01-01

    Full Text Available Recent research suggests that conceptual or emotional factors could influence the perceptual processing of stimuli. In this article, we aimed to evaluate the effect of social information (positive, negative, or no information related to the character of the target on subjective (perceived and felt valence and arousal, physiological (facial mimicry as well as on neural (P100 and N170 responses to dynamic emotional facial expressions (EFE that varied from neutral to one of the six basic emotions. Across three studies, the results showed reduced ratings of valence and arousal of EFE associated with incongruent social information (Study 1, increased electromyographical responses (Study 2, and significant modulation of P100 and N170 components (Study 3 when EFE were associated with social (positive and negative information (vs. no information. These studies revealed that positive or negative social information reduces subjective responses to incongruent EFE and produces a similar neural and physiological boost of the early perceptual processing of EFE irrespective of their congruency. In conclusion, the article suggests that the presence of positive or negative social context modulates early physiological and neural activity preceding subsequent behavior.

  19. Use of SMS-Based Surveys in the Rapid Response to the Ebola Outbreak in Liberia: Opening Community Dialogue.

    Science.gov (United States)

    Berman, Amanda; Figueroa, Maria Elena; Storey, J Douglas

    2017-01-01

    During an emerging health crisis like the 2014 Ebola outbreak in West Africa, communicating with communities to learn from them and to provide timely information can be a challenge. Insight into community thinking, however, is crucial for developing appropriate communication content and strategies and for monitoring the progress of the emergency response. In November 2014, the Health Communication Capacity Collaborative partnered with GeoPoll to implement a Short Message Service (SMS)-based survey that could create a link with affected communities and help guide the communication response to Ebola. The ideation metatheory of communication and behavior change guided the design of the survey questionnaire, which produced critical insights into trusted sources of information, knowledge of transmission modes, and perceived risks-all factors relevant to the design of an effective communication response that further catalyzed ongoing community actions. The use of GeoPoll's infrastructure for data collection proved a crucial source of almost-real-time data. It allowed for rapid data collection and processing under chaotic field conditions. Though not a replacement for standard survey methodologies, SMS surveys can provide quick answers within a larger research process to decide on immediate steps for communication strategies when the demand for speedy emergency response is high. They can also help frame additional research as the response evolves and overall monitor the pulse of the situation at any point in time.

  20. Rapid Modeling of and Response to Large Earthquakes Using Real-Time GPS Networks (Invited)

    Science.gov (United States)

    Crowell, B. W.; Bock, Y.; Squibb, M. B.

    2010-12-01

    Real-time GPS networks have the advantage of capturing motions throughout the entire earthquake cycle (interseismic, seismic, coseismic, postseismic), and because of this, are ideal for real-time monitoring of fault slip in the region. Real-time GPS networks provide the perfect supplement to seismic networks, which operate with lower noise and higher sampling rates than GPS networks, but only measure accelerations or velocities, putting them at a supreme disadvantage for ascertaining the full extent of slip during a large earthquake in real-time. Here we report on two examples of rapid modeling of recent large earthquakes near large regional real-time GPS networks. The first utilizes Japan’s GEONET consisting of about 1200 stations during the 2003 Mw 8.3 Tokachi-Oki earthquake about 100 km offshore Hokkaido Island and the second investigates the 2010 Mw 7.2 El Mayor-Cucapah earthquake recorded by more than 100 stations in the California Real Time Network. The principal components of strain were computed throughout the networks and utilized as a trigger to initiate earthquake modeling. Total displacement waveforms were then computed in a simulated real-time fashion using a real-time network adjustment algorithm that fixes a station far away from the rupture to obtain a stable reference frame. Initial peak ground displacement measurements can then be used to obtain an initial size through scaling relationships. Finally, a full coseismic model of the event can be run minutes after the event, given predefined fault geometries, allowing emergency first responders and researchers to pinpoint the regions of highest damage. Furthermore, we are also investigating using total displacement waveforms for real-time moment tensor inversions to look at spatiotemporal variations in slip.

  1. FIRESTORM: a collaborative network suite application for rapid sensor data processing and precise decisive responses

    Science.gov (United States)

    Kaniyantethu, Shaji

    2011-06-01

    This paper discusses the many features and composed technologies in Firestorm™ - a Distributed Collaborative Fires and Effects software. Modern response management systems capitalize on the capabilities of a plethora of sensors and its output for situational awareness. Firestorm utilizes a unique networked lethality approach by integrating unmanned air and ground vehicles to provide target handoff and sharing of data between humans and sensors. The system employs Bayesian networks for track management of sensor data, and distributed auction algorithms for allocating targets and delivering the right effect without information overload to the Warfighter. Firestorm Networked Effects Component provides joint weapon-target pairing, attack guidance, target selection standards, and other fires and effects components. Moreover, the open and modular architecture allows for easy integration with new data sources. Versatility and adaptability of the application enable it to devise and dispense a suitable response to a wide variety of scenarios. Recently, this application was used for detecting and countering a vehicle intruder with the help of radio frequency spotter sensor, command driven cameras, remote weapon system, portable vehicle arresting barrier, and an unmanned aerial vehicle - which confirmed the presence of the intruder, as well as provided lethal/non-lethal response and battle damage assessment. The completed demonstrations have proved Firestorm's™ validity and feasibility to predict, detect, neutralize, and protect key assets and/or area against a variety of possible threats. The sensors and responding assets can be deployed with numerous configurations to cover the various terrain and environmental conditions, and can be integrated to a number of platforms.

  2. Invasive species information networks: Collaboration at multiple scales for prevention, early detection, and rapid response to invasive alien species

    Science.gov (United States)

    Simpson, Annie; Jarnevich, Catherine S.; Madsen, John; Westbrooks, Randy G.; Fournier, Christine; Mehrhoff, Les; Browne, Michael; Graham, Jim; Sellers, Elizabeth A.

    2009-01-01

    Accurate analysis of present distributions and effective modeling of future distributions of invasive alien species (IAS) are both highly dependent on the availability and accessibility of occurrence data and natural history information about the species. Invasive alien species monitoring and detection networks (such as the Invasive Plant Atlas of New England and the Invasive Plant Atlas of the MidSouth) generate occurrence data at local and regional levels within the United States, which are shared through the US National Institute of Invasive Species Science. The Inter-American Biodiversity Information Network's Invasives Information Network (I3N), facilitates cooperation on sharing invasive species occurrence data throughout the Western Hemisphere. The I3N and other national and regional networks expose their data globally via the Global Invasive Species Information Network (GISIN). International and interdisciplinary cooperation on data sharing strengthens cooperation on strategies and responses to invasions. However, limitations to effective collaboration among invasive species networks leading to successful early detection and rapid response to invasive species include: lack of interoperability; data accessibility; funding; and technical expertise. This paper proposes various solutions to these obstacles at different geographic levels and briefly describes success stories from the invasive species information networks mentioned above. Using biological informatics to facilitate global information sharing is especially critical in invasive species science, as research has shown that one of the best indicators of the invasiveness of a species is whether it has been invasive elsewhere. Data must also be shared across disciplines because natural history information (e.g. diet, predators, habitat requirements, etc.) about a species in its native range is vital for effective prevention, detection, and rapid response to an invasion. Finally, it has been our

  3. Highly selective and rapidly responsive fluorescent probe for hydrogen sulfide detection in wine.

    Science.gov (United States)

    Wang, Hao; Wang, Jialin; Yang, Shaoxiang; Tian, Hongyu; Liu, Yongguo; Sun, Baoguo

    2018-08-15

    A new fluorescent probe 6-(2, 4-dinitrophenoxy)-2-naphthonitrile (probe 1) was designed and synthesized for the selective detection of hydrogen sulfide (H 2 S). The addition of H 2 S to a solution of probe 1 resulted in a marked fluorescence turn-on alongside a visual color change from colorless to light yellow. Importantly, this distinct color response indicated that probe 1 could be used as a visual sensor for H 2 S. Moreover, probe 1 was successfully used as a signal tool to determine the H 2 S levels in beer and red wine. Copyright © 2018 Elsevier Ltd. All rights reserved.

  4. Sedimentary evidence for enhanced hydrological cycling in response to rapid carbon release during the early Toarcian oceanic anoxic event

    Science.gov (United States)

    Izumi, Kentaro; Kemp, David B.; Itamiya, Shoma; Inui, Mutsuko

    2018-01-01

    A pronounced excursion in the carbon-isotope composition of biospheric carbon and coeval seawater warming during the early Toarcian (∼183 Ma) has been linked to the large-scale transfer of 12C-enriched carbon to the oceans and atmosphere. A European bias in the distribution of available data means that the precise pattern, tempo and global expression of this carbon cycle perturbation, and the associated environmental responses, remain uncertain. Here, we present a new cm-scale terrestrial-dominated carbon-isotope record through an expanded lower Toarcian section from Japan that displays a negative excursion pattern similar to marine and terrestrial carbon-isotope records documented from Europe. These new data suggest that 12C-enriched carbon was added to the biosphere in at least one rapid, millennial-scale pulse. Sedimentological analysis indicates a close association between the carbon-isotope excursion and high-energy sediment transport and enhanced fluvial discharge. Together, these data support the hypothesis that a sudden strengthening of the global hydrological cycle occurred in direct and immediate response to rapid carbon release and atmospheric warming.

  5. Rapid selection of escape mutants by the first CD8 T cell responses in acute HIV-1 infection

    Energy Technology Data Exchange (ETDEWEB)

    Korber, Bette Tina Marie [Los Alamos National Laboratory

    2008-01-01

    The recent failure of a vaccine that primes T cell responses to control primary HIV-1 infection has raised doubts about the role of CD8+ T cells in early HIV-1 infection. We studied four patients who were identified shortly after HIV-1 infection and before seroconversion. In each patient there was very rapid selection of multiple HIV-1 escape mutants in the transmitted virus by CD8 T cells, including examples of complete fixation of non-synonymous substitutions within 2 weeks. Sequencing by single genome amplification suggested that the high rate of virus replication in acute infection gave a selective advantage to virus molecules that contained simultaneous and gained sequential T cell escape mutations. These observations show that whilst early HIV-1 specific CD8 T cells can act against virus, rapid escape means that these T cell responses are unlikely to benefit the patient and may in part explain why current HIV-1 T cell vaccines may not be protective.

  6. The application of the rapid assessment and response methodology for cannabis prevention research among youth in the Netherlands.

    Science.gov (United States)

    Dupont, Hans B; Kaplan, Charles D; Braam, Richard V; Verbraeck, Hans T; de Vries, Nanne K

    2015-08-01

    Drug prevention methods tailored to specific target groups have become increasingly important. There is a growing need to find ways to rapidly assess and situate target groups in their particular contexts. This need is associated with the implementation of evidence-based interventions (EBIs) for these specific target groups. This article describes the application of Rapid Assessment and Response (RAR) as a necessary first step in designing and implementing a prevention intervention plan for problematic cannabis use among "loitering" youth in the South of the Netherlands. Seven RAR studies were conducted using an innovative stepwise model in which the prevention field worker is central. The normative structure for the use of cannabis was found to vary across the neighborhoods of the RAR studies and emerged as the focal point in designing a suitable response. The RAR studies also identified the need in the prevention toolbox for a tailored, low-threshold, effective, individual brief intervention for youth problematic cannabis use. The RAR was found to provide a powerful methodology for detecting target groups and generating contextual and normative data that enable the prevention field worker to select and adapt from the spectrum of existing Evidence based Interventions (EBIs) or develop the most promising model for implementation with the specific target group. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

  7. Rapid evolution of coral proteins responsible for interaction with the environment.

    Science.gov (United States)

    Voolstra, Christian R; Sunagawa, Shinichi; Matz, Mikhail V; Bayer, Till; Aranda, Manuel; Buschiazzo, Emmanuel; Desalvo, Michael K; Lindquist, Erika; Szmant, Alina M; Coffroth, Mary Alice; Medina, Mónica

    2011-01-01

    Corals worldwide are in decline due to climate change effects (e.g., rising seawater temperatures), pollution, and exploitation. The ability of corals to cope with these stressors in the long run depends on the evolvability of the underlying genetic networks and proteins, which remain largely unknown. A genome-wide scan for positively selected genes between related coral species can help to narrow down the search space considerably. We screened a set of 2,604 putative orthologs from EST-based sequence datasets of the coral species Acropora millepora and Acropora palmata to determine the fraction and identity of proteins that may experience adaptive evolution. 7% of the orthologs show elevated rates of evolution. Taxonomically-restricted (i.e. lineage-specific) genes show a positive selection signature more frequently than genes that are found across many animal phyla. The class of proteins that displayed elevated evolutionary rates was significantly enriched for proteins involved in immunity and defense, reproduction, and sensory perception. We also found elevated rates of evolution in several other functional groups such as management of membrane vesicles, transmembrane transport of ions and organic molecules, cell adhesion, and oxidative stress response. Proteins in these processes might be related to the endosymbiotic relationship corals maintain with dinoflagellates in the genus Symbiodinium. This study provides a birds-eye view of the processes potentially underlying coral adaptation, which will serve as a foundation for future work to elucidate the rates, patterns, and mechanisms of corals' evolutionary response to global climate change.

  8. Lake ecosystem response to rapid lateglacial climate changes in lake sediments from northern Poland

    Science.gov (United States)

    Słowiński, Michał; Zawiska, Izabela; Ott, Florian; Noryśkiewicz, Agnieszka M.; Apolinarska, Karina; Lutyńska, Monika; Michczyńska, Danuta J.; Brauer, Achim; Wulf, Sabine; Skubała, Piotr; Błaszkiewicz, Mirosław

    2013-04-01

    During the Late Glacial Period environment changes were triggered by climatic oscillations which in turn controlled processes like, for example, permafrost thawing, vegetation development and ground water circulation. These environmental changes are ideally recorded in lake sediments and thus can be reconstructed applying a multi-poxy approach. Here, we present the results from the Trzechowskie paleolake, located in the northern Polish lowlands (eastern part of the Pomeranian Lakeland). The site is situated on the outwash plain of the Wda River, which was formed during the Pomeranian phase of the Vistulian glaciation ca 16,000 14C yrs BP. The depression of the Trzechowskie lake basin formed after melting of a buried ice block during the Allerød (13903±170 cal yrs BP). We reconstructed environmental changes in the Trzechowskie paleolake and its catchment using biotic proxies (macrofossils, pollen, cladocera, diatoms, oribatidae mite) and geochemical proxies (δ18O, δ13C, loss-on-ignition (LOI), CaCO3 content). In addition, we carried out µ-XRF element core scanning. The chronology has been established by means of biostratigraphyAMS14C dating on plant macro remains, varve counting in laminated intervals and the late Allerød Laacher See Tephra isochrone. Our results showed that biogenic accumulation in the lake started during the Bølling. Development of coniferous forest during the Allerød with dominance of Pinus sylvestris lead to leaching of carbonates in the catchment due to low pH increasing the flux of Ca ions into the lake. In consequence calcite precipitating in the lake increased as evidences by increasing CaCO3 contents. Both biotic and physical proxies clearly reflect the rapid decrease in productivity at the onset of the Younger Dryas. We compare the data from the Trzechowskie paleolake with the Meerfelder Maar and Rehwiese lake records based on tephrochronological synchronization using the Laacher See Tephra. This study is a contribution to the

  9. Low-Cost, Rapidly Responsive, Controllable, and Reversible Photochromic Hydrogel for Display and Storage.

    Science.gov (United States)

    Yang, Yongqi; Guan, Lin; Gao, Guanghui

    2018-04-25

    Traditional optoelectronic devices without stretchable performance could be limited for substrates with irregular shape. Therefore, it is urgent to explore a new generation of flexible, stretchable, and low-cost intelligent vehicles as visual display and storage devices, such as hydrogels. In the investigation, a novel photochromic hydrogel was developed by introducing the negatively charged ammonium molybdate as a photochromic unit into polyacrylamide via ionic and covalent cross-linking. The hydrogel exhibited excellent properties of low cost, easy preparation, stretchable deformation, fatigue resistance, high transparency, and second-order response to external signals. Moreover, the photochromic and fading process of hydrogels could be precisely controlled and repeated under the irradiation of UV light and exposure of oxygen at different time and temperature. The photochromic hydrogel could be considered applied for artificial intelligence system, wearable healthcare device, and flexible memory device. Therefore, the strategy for designing a soft photochromic material would open a new direction to manufacture flexible and stretchable devices.

  10. Human adaptation responses to a rapidly changing Arctic: A research context for building system resilience

    Science.gov (United States)

    Chapin, T.; Brinkman, T. J.

    2016-12-01

    Although human behavior accounts for more uncertainty in future trajectories in climate change than do biophysical processes, most climate-change research fails to include human actions in research design and implementation. This is well-illustrated in the Arctic. At the global scale, arctic processes strongly influence the strength of biophysical feedbacks between global human emissions and the rate of climate warming. However, most human actions in the arctic have little effect on these feedbacks, so research can contribute most effectively to reduction in arctic warming through improved understanding of the strength of arctic-global biophysical feedbacks, as in NASA's ABoVE program, and its effective communication to policy makers and the public. In contrast, at the local to regional scale within the arctic, human actions may influence the ecological and societal consequences of arctic warming, so research benefits from active stakeholder engagement in research design and implementation. Human communities and other stakeholders (government and NGOs) respond heterogeneously to socioeconomic and environmental change, so research that documents the range of historical and current adaptive responses to change provides insights on the resilience (flexibility of future options) of social-ecological processes in the arctic. Alaskan communities have attempted a range of adaptive responses to coastal erosion (e.g., seasonal migration, protection in place, relocation), wildfire (fire suppression to use of fire to manage wildlife habitat or landscape heterogeneity), declining sea ice (e.g., new hunting technology, sea ice observations and predictions), and changes in wildlife and fish availability (e.g., switch to harvest of alternative species, harvest times, or harvest locations). Research that draws on both traditional and western knowledge facilitates adaptation and predictions of the likely societal consequences of climate change in the Arctic. Effective inclusion of

  11. Rapid evolution of coral proteins responsible for interaction with the environment.

    Directory of Open Access Journals (Sweden)

    Christian R Voolstra

    Full Text Available Corals worldwide are in decline due to climate change effects (e.g., rising seawater temperatures, pollution, and exploitation. The ability of corals to cope with these stressors in the long run depends on the evolvability of the underlying genetic networks and proteins, which remain largely unknown. A genome-wide scan for positively selected genes between related coral species can help to narrow down the search space considerably.We screened a set of 2,604 putative orthologs from EST-based sequence datasets of the coral species Acropora millepora and Acropora palmata to determine the fraction and identity of proteins that may experience adaptive evolution. 7% of the orthologs show elevated rates of evolution. Taxonomically-restricted (i.e. lineage-specific genes show a positive selection signature more frequently than genes that are found across many animal phyla. The class of proteins that displayed elevated evolutionary rates was significantly enriched for proteins involved in immunity and defense, reproduction, and sensory perception. We also found elevated rates of evolution in several other functional groups such as management of membrane vesicles, transmembrane transport of ions and organic molecules, cell adhesion, and oxidative stress response. Proteins in these processes might be related to the endosymbiotic relationship corals maintain with dinoflagellates in the genus Symbiodinium.This study provides a birds-eye view of the processes potentially underlying coral adaptation, which will serve as a foundation for future work to elucidate the rates, patterns, and mechanisms of corals' evolutionary response to global climate change.

  12. Rapid Evolution of Coral Proteins Responsible for Interaction with the Environment

    Energy Technology Data Exchange (ETDEWEB)

    Voolstra, Christian R.; Sunagawa, Shinichi; Matz, Mikhail V.; Bayer, Till; Aranda, Manuel; Buschiazzo, Emmanuel; DeSalvo, Michael K.; Lindquist, Erika; Szmant, Alina M.; Coffroth, Mary Alice; Medina, Monica

    2011-01-31

    Background: Corals worldwide are in decline due to climate change effects (e.g., rising seawater temperatures), pollution, and exploitation. The ability of corals to cope with these stressors in the long run depends on the evolvability of the underlying genetic networks and proteins, which remain largely unknown. A genome-wide scan for positively selected genes between related coral species can help to narrow down the search space considerably. Methodology/Principal Findings: We screened a set of 2,604 putative orthologs from EST-based sequence datasets of the coral species Acropora millepora and Acropora palmata to determine the fraction and identity of proteins that may experience adaptive evolution. 7percent of the orthologs show elevated rates of evolution. Taxonomically-restricted (i.e. lineagespecific) genes show a positive selection signature more frequently than genes that are found across many animal phyla. The class of proteins that displayed elevated evolutionary rates was significantly enriched for proteins involved in immunity and defense, reproduction, and sensory perception. We also found elevated rates of evolution in several other functional groups such as management of membrane vesicles, transmembrane transport of ions and organic molecules, cell adhesion, and oxidative stress response. Proteins in these processes might be related to the endosymbiotic relationship corals maintain with dinoflagellates in the genus Symbiodinium. Conclusion/Relevance: This study provides a birds-eye view of the processes potentially underlying coral adaptation, which will serve as a foundation for future work to elucidate the rates, patterns, and mechanisms of corals? evolutionary response to global climate change.

  13. A detection method in living plant cells for rapidly monitoring the response of plants to exogenous lanthanum.

    Science.gov (United States)

    Cheng, Mengzhu; Wang, Lihong; Yang, Qing; Huang, Xiaohua

    2018-08-30

    The pollution of rare earth elements (REEs) in ecosystem is becoming more and more serious, so it is urgent to establish methods for monitoring the pollution of REEs. Monitoring environmental pollution via the response of plants to pollutants has become the most stable and accurate method compared with traditional methods, but scientists still need to find the primary response of plants to pollutants to improve the sensitivity and speed of this method. Based on the facts that the initiation of endocytosis is the primary cellular response of the plant leaf cells to REEs and the detection of endocytosis is complex and expensive, we constructed a detection method in living plant cells for rapidly monitoring the response of plants to exogenous lanthanum [La(III), a representative of REEs] by designing a new immuno-electrochemical method for detecting the content change in extracellular vitronectin-like protein (VN) that are closely related to endocytosis. Results showed that when 30 μM La(III) initiated a small amount of endocytosis, the content of extracellular VN increased by 5.46 times, but the structure and function of plasma membrane were not interfered by La(III); when 80 μM La(III) strongly initiated a large amount of endocytosis, the content of extracellular VN increased by 119 times, meanwhile, the structure and function of plasma membrane were damaged. In summary, the detection method can reflect the response of plants to La(III) via detecting the content change in extracellular VN, which provides an effective and convenient way to monitor the response of plants to exogenous REEs. Copyright © 2018. Published by Elsevier Inc.

  14. Rapid measurement of auditory filter shape in mice using the auditory brainstem response and notched noise.

    Science.gov (United States)

    Lina, Ioan A; Lauer, Amanda M

    2013-04-01

    The notched noise method is an effective procedure for measuring frequency resolution and auditory filter shapes in both human and animal models of hearing. Briefly, auditory filter shape and bandwidth estimates are derived from masked thresholds for tones presented in noise containing widening spectral notches. As the spectral notch widens, increasingly less of the noise falls within the auditory filter and the tone becomes more detectible until the notch width exceeds the filter bandwidth. Behavioral procedures have been used for the derivation of notched noise auditory filter shapes in mice; however, the time and effort needed to train and test animals on these tasks renders a constraint on the widespread application of this testing method. As an alternative procedure, we combined relatively non-invasive auditory brainstem response (ABR) measurements and the notched noise method to estimate auditory filters in normal-hearing mice at center frequencies of 8, 11.2, and 16 kHz. A complete set of simultaneous masked thresholds for a particular tone frequency were obtained in about an hour. ABR-derived filter bandwidths broadened with increasing frequency, consistent with previous studies. The ABR notched noise procedure provides a fast alternative to estimating frequency selectivity in mice that is well-suited to high through-put or time-sensitive screening. Copyright © 2013 Elsevier B.V. All rights reserved.

  15. Rapid assay for cell age response to radiation by electronic volume flow cell sorting

    International Nuclear Information System (INIS)

    Freyer, J.P.; Wilder, M.E.; Raju, M.R.

    1987-01-01

    A new technique is described for measuring cell survival as a function of cell cycle position using flow cytometric cell sorting on the basis of electronic volume signals. Sorting of cells into different cell age compartments is demonstrated for three different cell lines commonly used in radiobiological research. Using flow cytometric DNA content analysis and [ 3 H]thymidine autoradiography of the sorted cell populations, it is demonstrated that resolution of the age compartment separation is as good as or better than that reported for other cell synchronizing techniques. Variation in cell survival as a function of position in the cell cycle after a single dose of radiation as measured by volume cell sorting is similar to that determined by other cell synchrony techniques. Advantages of this method include: (1) no treatment of the cells is required, thus, this method is noncytotoxic; (2) no cell cycle progression is needed to obtain different cell age compartments; (3) the cell population can be held in complete growth medium at any desired temperature during sorting; (4) a complete radiation age - response assay can be plated in 2 h. Applications of this method are discussed, along with some technical limitations. (author)

  16. Rapid onset pressor response to exercise in young women with a family history of hypertension.

    Science.gov (United States)

    Matthews, Evan L; Greaney, Jody L; Wenner, Megan M

    2017-09-01

    What is the central question of this study? Alterations in blood pressure control at exercise onset are apparent in older adults with established cardiovascular disease. It is currently not known whether these alterations are evident in young adults with a family history of hypertension. What is the main finding and its importance? We demonstrate that young women with a family history of hypertension display a larger change in blood pressure within the first 10 s of isometric exercise. These data suggest altered blood pressure control in young women with a family history of hypertension. Hypertensive adults demonstrate atypical increases in blood pressure (BP) and muscle sympathetic nerve activity (MSNA) at the immediate onset of static muscle contraction. However, it is unknown whether these abnormal responses occur in young, otherwise healthy adults at risk for developing future disease, such as those with a family history of hypertension (+FH). We tested the hypothesis that +FH young women have exaggerated increases in BP and MSNA at the onset of static muscle contraction compared with those without a family history of hypertension (-FH). We retrospectively examined beat-by-beat BP and MSNA during the initial 30 s of isometric handgrip exercise (30% of maximal voluntary contraction) in 16 +FH (22 ± 2 years old, 22 ± 3 kg m -2 ) and 16 -FH (22 ± 3 years old, 22 ± 3 kg m -2 ) women. Resting mean arterial pressure (+FH 80 ± 11 mmHg versus -FH 84 ± 13 mmHg), MSNA burst frequency (+FH 7 ± 3 bursts min -1 versus -FH 9 ± 5 bursts min -1 ) and burst incidence [+FH 12 ± 4 bursts (100 heart beats) -1 versus -FH 12 ± 8 bursts (100 heart beats) -1 ] were similar between groups (all P > 0.05). Within the first 10 s of exercise, changes in mean arterial pressure (+FH Δ8 ± 6 mmHg versus -FH Δ3 ± 2 mmHg, P exercise was not different between groups (-FH 7 ± 5 bursts min -1 versus +FH 9 ± 3 bursts min -1

  17. Assessment of Flood Disaster Impacts in Cambodia: Implications for Rapid Disaster Response

    Science.gov (United States)

    Ahamed, Aakash; Bolten, John; Doyle, Colin

    2016-04-01

    Disaster monitoring systems can provide near real time estimates of population and infrastructure affected by sudden onset natural hazards. This information is useful to decision makers allocating lifesaving resources following disaster events. Floods are the world's most common and devastating disasters (UN, 2004; Doocy et al., 2013), and are particularly frequent and severe in the developing countries of Southeast Asia (Long and Trong, 2001; Jonkman, 2005; Kahn, 2005; Stromberg, 2007; Kirsch et al., 2012). Climate change, a strong regional monsoon, and widespread hydropower construction contribute to a complex and unpredictable regional hydrodynamic regime. As such, there is a critical need for novel techniques to assess flood impacts to population and infrastructure with haste during and following flood events in order to enable governments and agencies to optimize response efforts following disasters. Here, we build on methods to determine regional flood extent in near real time and develop systems that automatically quantify the socioeconomic impacts of flooding in Cambodia. Software developed on cloud based, distributed processing Geographic Information Systems (GIS) is used to demonstrate spatial and numerical estimates of population, households, roadways, schools, hospitals, airports, agriculture and fish catch affected by severe monsoon flooding occurring in the Cambodian portion of Lower Mekong River Basin in 2011. Results show modest agreement with government and agency estimates. Maps and statistics generated from the system are intended to complement on the ground efforts and bridge information gaps to decision makers. The system is open source, flexible, and can be applied to other disasters (e.g. earthquakes, droughts, landslides) in various geographic regions.

  18. Rapid response of a marine mammal species to holocene climate and habitat change.

    Directory of Open Access Journals (Sweden)

    Mark de Bruyn

    2009-07-01

    Full Text Available Environmental change drives demographic and evolutionary processes that determine diversity within and among species. Tracking these processes during periods of change reveals mechanisms for the establishment of populations and provides predictive data on response to potential future impacts, including those caused by anthropogenic climate change. Here we show how a highly mobile marine species responded to the gain and loss of new breeding habitat. Southern elephant seal, Mirounga leonina, remains were found along the Victoria Land Coast (VLC in the Ross Sea, Antarctica, 2,500 km from the nearest extant breeding site on Macquarie Island (MQ. This habitat was released after retreat of the grounded ice sheet in the Ross Sea Embayment 7,500-8,000 cal YBP, and is within the range of modern foraging excursions from the MQ colony. Using ancient mtDNA and coalescent models, we tracked the population dynamics of the now extinct VLC colony and the connectivity between this and extant breeding sites. We found a clear expansion signal in the VLC population approximately 8,000 YBP, followed by directional migration away from VLC and the loss of diversity at approximately 1,000 YBP, when sea ice is thought to have expanded. Our data suggest that VLC seals came initially from MQ and that some returned there once the VLC habitat was lost, approximately 7,000 years later. We track the founder-extinction dynamics of a population from inception to extinction in the context of Holocene climate change and present evidence that an unexpectedly diverse, differentiated breeding population was founded from a distant source population soon after habitat became available.

  19. Fluvial response to the last Holocene rapid climate change in the Northwestern Mediterranean coastlands

    Science.gov (United States)

    Degeai, Jean-Philippe; Devillers, Benoît; Blanchemanche, Philippe; Dezileau, Laurent; Oueslati, Hamza; Tillier, Margaux; Bohbot, Hervé

    2017-05-01

    The variability of fluvial activity in the Northwestern Mediterranean coastal lowlands and its relationship with modes of climate change were analysed from the late 9th to the 18th centuries CE. Geochemical analyses were undertaken from a lagoonal sequence and surrounding sediments in order to track the fluvial inputs into the lagoon. An index based on the K/S and Rb/S ratios was used to evidence the main periods of fluvial activity. This index reveals that the Medieval Climate Anomaly (MCA) was a drier period characterized by a lower fluvial activity, while the Little Ice Age (LIA) was a wetter period with an increase of the river dynamics. Three periods of higher than average fluvial activity were evidenced at the end of the first millennium CE (ca. 900-950 cal yr CE), in the first half of the second millennium CE (ca. 1150-1550 cal yr CE), and during the 1600s-1700s CE (ca. 1650-1800 cal yr CE). The comparison of these fluvial periods with other records of riverine or lacustrine floods in Spain, Italy, and South of France seems to indicate a general increase in fluvial and flood patterns in the Northwestern Mediterranean in response to the climate change from the MCA to the LIA, although some episodes of flooding are not found in all records. Besides, the phases of higher than average fluvial dynamics are in good agreement with the North Atlantic cold events evidenced from records of ice-rafted debris. The evolution of fluvial activity in the Northwestern Mediterranean coastlands during the last millennium could have been driven by atmospheric and oceanic circulation patterns.

  20. Rapid response of a marine mammal species to holocene climate and habitat change.

    Science.gov (United States)

    de Bruyn, Mark; Hall, Brenda L; Chauke, Lucas F; Baroni, Carlo; Koch, Paul L; Hoelzel, A Rus

    2009-07-01

    Environmental change drives demographic and evolutionary processes