WorldWideScience

Sample records for rapid accident assessment

  1. Program for rapid dose assessment in criticality accident, RADAPAS

    International Nuclear Information System (INIS)

    Takahashi, Fumiaki

    2006-09-01

    In a criticality accident, a person near fissile material can receive extremely high dose which can cause acute health effect. For such a case, medical treatment should be carried out for the exposed person, according to severity of the exposure. Then, radiation dose should be rapidly assessed soon after an outbreak of an accident. Dose assessment based upon the quantity of induced 24 Na in human body through neutron exposure is expected as one of useful dosimetry techniques in a criticality accident. A dose assessment program, called RADAPAS (RApid Dose Assessment Program from Activated Sodium in Criticality Accidents), was therefore developed to assess rapidly radiation dose to exposed persons from activity of induced 24 Na. RADAPAS consists of two parts; one is a database part and the other is a part for execution of dose calculation. The database contains data compendiums of energy spectra and dose conversion coefficients from specific activity of 24 Na induced in human body, which had been derived in a previous analysis using Monte Carlo calculation code. Information for criticality configuration or characteristics of radiation in the accident field is to be interactively given with interface displays in the dose calculation. RADAPAS can rapidly derive radiation dose to the exposed person from the given information and measured 24 Na specific activity by using the conversion coefficient in database. This report describes data for dose conversions and dose calculation in RADAPAS and explains how to use the program. (author)

  2. Interactive Rapid Dose Assessment Model (IRDAM): reactor-accident assessment methods. Vol.2

    International Nuclear Information System (INIS)

    Poeton, R.W.; Moeller, M.P.; Laughlin, G.J.; Desrosiers, A.E.

    1983-05-01

    As part of the continuing emphasis on emergency preparedness, the US Nuclear Regulatory Commission (NRC) sponsored the development of a rapid dose assessment system by Pacific Northwest Laboratory (PNL). This system, the Interactive Rapid Dose Assessment Model (IRDAM) is a micro-computer based program for rapidly assessing the radiological impact of accidents at nuclear power plants. This document describes the technical bases for IRDAM including methods, models and assumptions used in calculations. IRDAM calculates whole body (5-cm depth) and infant thyroid doses at six fixed downwind distances between 500 and 20,000 meters. Radionuclides considered primarily consist of noble gases and radioiodines. In order to provide a rapid assessment capability consistent with the capacity of the Osborne-1 computer, certain simplifying approximations and assumptions are made. These are described, along with default values (assumptions used in the absence of specific input) in the text of this document. Two companion volumes to this one provide additional information on IRDAM. The user's Guide (NUREG/CR-3012, Volume 1) describes the setup and operation of equipment necessary to run IRDAM. Scenarios for Comparing Dose Assessment Models (NUREG/CR-3012, Volume 3) provides the results of calculations made by IRDAM and other models for specific accident scenarios

  3. Interactive Rapid Dose Assessment Model (IRDAM): user's guide

    International Nuclear Information System (INIS)

    Poeton, R.W.; Moeller, M.P.; Laughlin, G.J.; Desrosiers, A.E.

    1983-05-01

    As part of the continuing emphasis on emergency preparedness the US Nuclear Regulatory Commission (NRC) sponsored the development of a rapid dose assessment system by Pacific Northwest Laboratory (PNL). This system, the Interactive Rapid Dose Assessment Model (IRDAM) is a micro-computer based program for rapidly assessing the radiological impact of accidents at nuclear power plants. This User's Guide provides instruction in the setup and operation of the equipment necessary to run IRDAM. Instructions are also given on how to load the magnetic disks and access the interactive part of the program. Two other companion volumes to this one provide additional information on IRDAM. Reactor Accident Assessment Methods (NUREG/CR-3012, Volume 2) describes the technical bases for IRDAM including methods, models and assumptions used in calculations. Scenarios for Comparing Dose Assessment Models (NUREG/CR-3012, Volume 3) provides the results of calculations made by IRDAM and other models for specific accident scenarios

  4. Assessment of Equipment Capability to Perform Reliably under Severe Accident Conditions

    International Nuclear Information System (INIS)

    2017-07-01

    The experience from the last 40 years has shown that severe accidents can subject electrical and instrumentation and control (I&C) equipment to environmental conditions exceeding the equipment’s original design basis assumptions. Severe accident conditions can then cause rapid degradation or damage to various degrees up to complete failure of such equipment. This publication provides the technical basis to consider when assessing the capability of electrical and I&C equipment to perform reliably during a severe accident. It provides examples of calculation tools to determine the environmental parameters as well as examples and methods that Member States can apply to assess equipment reliability.

  5. Dose assessment in radiological accidents

    International Nuclear Information System (INIS)

    Donkor, S.

    2013-04-01

    The applications of ionizing radiation bring many benefits to humankind, ranging from power generation to uses in medicine, industry and agriculture. Facilities that use radiation source require special care in the design and operation of equipment to prevent radiation injury to workers or to the public. Despite considerable development of radiation safety, radiation accidents do happen. The purpose of this study is therefore to discuss how to assess doses to people who will be exposed to a range of internal and external radiation sources in the event of radiological accidents. This will go a long way to complement their medical assessment thereby helping to plan their treatment. Three radiological accidents were reviewed to learn about the causes of those accidents and the recommendations that were put in place to prevent recurrence of such accidents. Various types of dose assessment methods were discussed.(au)

  6. Assessing economic consequences of radiation accidents

    International Nuclear Information System (INIS)

    Rowe, M.D.; Lee, J.C.; Grimshaw, C.A.; Kalb, P.D.

    1987-01-01

    A recent review of existing models and methods for assessing potential consequences of accidents in the high-level radioactive waste (HLW) disposal system identifies economic consequence assessment methods as a weak point. Existing methods have mostly been designed to assess economic consequences of reactor accidents, the possible scale of which can be several orders of magnitude greater than anything possible in the HLW disposal system. There is therefore some question about the applicability of these methods, their assumptions, and their level of detail to assessments of smaller accidents. The US Dept. of Energy funded this study to determine needs for code modifications or model development for assessing economic costs of accidents in the HLW disposal system. The objectives of the study were as follows: (1) review the literature on economic consequences of accidents to determine the availability of assessment methods and data and their applicability to the HLW disposal system before closure. (2) Determine needs for expansion, revision, or adaptation of methods and data for modeling economic consequences of accidents of the scale projected for the disposal system. (3) Gather data that might be useful for the needed revisions for modeling economic impacts on this scale

  7. 10 CFR 76.85 - Assessment of accidents.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 2 2010-01-01 2010-01-01 false Assessment of accidents. 76.85 Section 76.85 Energy... Assessment of accidents. The Corporation shall perform an analysis of potential accidents and consequences to... postulated accidents which include internal and external events and natural phenomena in order to ensure...

  8. The application of the assessment of nuclear accident status in emergency decision-making during nuclear accident

    International Nuclear Information System (INIS)

    Yang Ling

    2011-01-01

    Nuclear accident assessment is one of the bases for emergency decision-making in the situation of nuclear accident in NPP. Usually, the assessment includes accident status and consequence assessment. It is accident status assessment, and its application in emergency decision-making is introduced here. (author)

  9. Cost per severe accident as an index for severe accident consequence assessment and its applications

    International Nuclear Information System (INIS)

    Silva, Kampanart; Ishiwatari, Yuki; Takahara, Shogo

    2014-01-01

    The Fukushima Accident emphasizes the need to integrate the assessments of health effects, economic impacts, social impacts and environmental impacts, in order to perform a comprehensive consequence assessment of severe accidents in nuclear power plants. “Cost per severe accident” is introduced as an index for that purpose. The calculation methodology, including the consequence analysis using level 3 probabilistic risk assessment code OSCAAR and the calculation method of the cost per severe accident, is proposed. This methodology was applied to a virtual 1,100 MWe boiling water reactor. The breakdown of the cost per severe accident was provided. The radiation effect cost, the relocation cost and the decontamination cost were the three largest components. Sensitivity analyses were carried out, and parameters sensitive to cost per severe accident were specified. The cost per severe accident was compared with the amount of source terms, to demonstrate the performance of the cost per severe accident as an index to evaluate severe accident consequences. The ways to use the cost per severe accident for optimization of radiation protection countermeasures and for estimation of the effects of accident management strategies are discussed as its applications. - Highlights: • Cost per severe accident is used for severe accident consequence assessment. • Assessments of health, economic, social and environmental impacts are included. • Radiation effect, relocation and decontamination costs are important cost components. • Cost per severe accident can be used to optimize radiation protection measures. • Effects of accident management can be estimated using the cost per severe accident

  10. Water hammer due to rapid bubble growth at a severe accident

    International Nuclear Information System (INIS)

    Aya, Izuo; Adachi, Masaki; Shiozaki, Koki; Inasaka, Fujio

    2000-01-01

    On a severe accident of the light water reactor (LWR), by steam explosion and so forth due to hydrogen formation by water-metal reaction and direct contact of molted core with water, it is presumed that a lot of vapor forms for a short time in water at reactor vessel and under part of containment vessel. This study aims at and carries out, under reference of the conventional study results, experimental elucidation on coherence of water block motion due to rapid bubble growth, proposal on reduction method of water hammering, development of water hammer estimating method in an actual reactor, and proposal for upgrading of reliability on severe accident evaluation. In 1998 fiscal year, an 'Experimental apparatus on water hammering elements on sever accident' simulated rapid bubble growth due to steam explosion by injecting high pressure air into water was produced to carry out its function test. As a result of the carried out function tests, extreme water hammering phenomena were observed, by which validity of establishment on the study objects could be confirmed. (G.K.)

  11. Assessment of accident energetics in LMFBR core-disruptive accidents

    International Nuclear Information System (INIS)

    Fauske, H.K.

    1977-01-01

    An assessment of accident energetics in LMFBR core-disruptive accidents is given with emphasis on the generic issues of energetic recriticality and energetic fuel-coolant interaction events. Application of a few general behavior principles to the oxide-fueled system suggests that such events are highly unlikely following a postulated core meltdown event

  12. Use of PSA and severe accident assessment results for the accident management

    International Nuclear Information System (INIS)

    Jang, S. H.; Kim, H. G.; Jang, H. S.; Moon, S. K.; Park, J. U.

    1993-12-01

    The objectives for this study are to investigate the basic principle or methodology which is applicable to accident management, by using the results of PSA and severe accident research, and also facilitate the preparation of accidents management program in the future. This study was performed as follows: derivation of measures for core damage prevention, derivation of measures for accident mitigation, application of computerized tool to assess severe accident management

  13. Use of PSA and severe accident assessment results for the accident management

    Energy Technology Data Exchange (ETDEWEB)

    Jang, S H; Kim, H G; Jang, H S; Moon, S K; Park, J U [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

    1993-12-15

    The objectives for this study are to investigate the basic principle or methodology which is applicable to accident management, by using the results of PSA and severe accident research, and also facilitate the preparation of accidents management program in the future. This study was performed as follows: derivation of measures for core damage prevention, derivation of measures for accident mitigation, application of computerized tool to assess severe accident management.

  14. Childhood accidents: the relationship of family size to incidence, supervision, and rapidity of seeking medical care.

    Science.gov (United States)

    Schwartz, Shepard; Eidelman, Arthur I; Zeidan, Amin; Applebaum, David; Raveh, David

    2005-09-01

    Large family size may be a risk factor for childhood accidents. A possible association with quality of child supervision and rapidity of seeking medical care has not been fully evaluated. To determine whether children with multiple siblings are at increased risk for accidents, to assess whether quality of child supervision varies with family size, and to evaluate the relationship of family size with the rapidity of seeking medical care after an accident. We prospectively studied 333 childhood accidents treated at TEREM (emergency care station) or the Shaare Zedek Medical Center. Details on family composition and the accident were obtained through parental interview. Family size of the study population was compared with that of the Jerusalem population. Families with one to three children (Group 1) and four or more children (Group 2) were compared with regard to type of supervision and different "Gap times" - the time interval from when the accident occurred until medical assistance was sought ("Gap 1"), the time from that medical contact until arrival at Shaare Zedek ("Gap 2"), and the time from the accident until arrival at Shaare Zedek for those children for whom interim medical assistance either was ("Gap 3A") or was not ("Gap 3B") sought. Children from families with 1, 2, 3, 4 and > or =5 children comprised 7.2%, 18.3%, 14.4%, 18.6% and 41.4% of our sample compared to 20.4%, 21.8%, 18.4%, 14.7% and 24.7% in the general population respectively. Children from Group 2 were less often attended to by an adult (44.5% vs. 62.0%) and more often were in the presence only of other children at the time of the accident (27.0% vs. 10.5%). Gaps 1, 2 and 3A in Group 2 (6.3 hours, 16.5 hours, 27.8 hours respectively) were longer than for Group 1 (2.7, 10.7, 13.3 hours respectively). The risk for accidents is increased among children from families with four or more children. The adequacy of child supervision in large families is impaired. There is a relative delay from the time

  15. Risk assessment of complex accident scenarios

    International Nuclear Information System (INIS)

    Kluegel, Jens-Uwe

    2012-01-01

    The use of methods of risk assessment in accidents in nuclear plants is based on an old tradition. The first consistent systematic study is considered to be the Rasmussen Study of the U.S. Nuclear Regulatory Commission, NRC, WASH-1400. Above and beyond the realm of nuclear technology, there is an extensive range of accident, risk and reliability research into technical-administrative systems. In the past, it has been this area of research which has led to the development of concepts of safety precautions of the type also introduced into nuclear technology (barrier concept, defense in depth, single-failure criterion), where they are now taken for granted as trivial concepts. Also for risk analysis, nuclear technology made use of methods (such as event and fault tree analyses) whose origins were outside the nuclear field. One area in which the use of traditional methods of probabilistic safety analysis is encountering practical problems is risk assessment of complex accident scenarios in nuclear technology. A definition is offered of the term 'complex accident scenarios' in nuclear technology. A number of problems are addressed which arise in the use of traditional PSA procedures in risk assessment of complex accident scenarios. Cases of complex accident scenarios are presented to demonstrate methods of risk assessment which allow robust results to be obtained even when traditional techniques of risk analysis are maintained as a matter of principle. These methods are based on the use of conditional risk metrics. (orig.)

  16. Evaluation of severe accident environmental conditions taking accident management strategy into account for equipment survivability assessments

    International Nuclear Information System (INIS)

    Lee, Byung Chul; Jeong, Ji Hwan; Na, Man Gyun; Kim, Soong Pyung

    2003-01-01

    This paper presents a methodology utilizing accident management strategy in order to determine accident environmental conditions in equipment survivability assessments. In case that there is well-established accident management strategy for specific nuclear power plant, an application of this tool can provide a technical rationale on equipment survivability assessment so that plant-specific and time-dependent accident environmental conditions could be practically and realistically defined in accordance with the equipment and instrumentation required for accident management strategy or action appropriately taken. For this work, three different tools are introduced; Probabilistic Safety Assessment (PSA) outcomes, major accident management strategy actions, and Accident Environmental Stages (AESs). In order to quantitatively investigate an applicability of accident management strategy to equipment survivability, the accident simulation for a most likely scenario in Korean Standard Nuclear Power Plants (KSNPs) is performed with MAAP4 code. The Accident Management Guidance (AMG) actions such as the Reactor Control System (RCS) depressurization, water injection into the RCS, the containment pressure and temperature control, and hydrogen concentration control in containment are applied. The effects of these AMG actions on the accident environmental conditions are investigated by comparing with those from previous normal accident simulation, especially focused on equipment survivability assessment. As a result, the AMG-involved case shows the higher accident consequences along the accident environmental stages

  17. Assessment of uncertainties in severe accident management strategies

    International Nuclear Information System (INIS)

    Kastenberg, W.E.; Apostolakis, G.; Catton, I.; Dhir, V.K.; Okrent, D.

    1990-01-01

    Recent progress on the development of Probabilistic Risk Assessment (PRA) as a tool for qualifying nuclear reactor safety and on research devoted to severe accident phenomena has made severe accident management an achievable goal. Severe accident management strategies may involve operational changes, modification and/or addition of hardware, and institutional changes. In order to achieve the goal of managing severe accidents, a method for assessment of strategies must be developed which integrates PRA methodology and our current knowledge concerning severe accident phenomena, including uncertainty. The research project presented in this paper is aimed at delineating uncertainties in severe accident progression and their impact on severe accident management strategies

  18. Severe accidents at nuclear power plants. Their risk assessment and accident management

    International Nuclear Information System (INIS)

    Abe, Kiyoharu.

    1995-05-01

    This document is to explain the severe accident issues. Severe Accidents are defined as accidents which are far beyond the design basis and result in severe damage of the core. Accidents at Three Mild Island in USA and at Chernobyl in former Soviet Union are examples of severe accidents. The causes and progressions of the accidents as well as the actions taken are described. Probabilistic Safety Assessment (PSA) is a method to estimate the risk of severe accidents at nuclear reactors. The methodology for PSA is briefly described and current status on its application to safety related issues is introduced. The acceptability of the risks which inherently accompany every technology is then discussed. Finally, provision of accident management in Japan is introduced, including the description of accident management measures proposed for BWRs and PWRs. (author)

  19. Assessment of Mobile Accident Response Capability

    International Nuclear Information System (INIS)

    1983-03-01

    This report presents the results of a DOE-sponsored assessment of nuclear accident response resources. It identifies the mobile resources that could be required to respond to different types of nuclear accidents including major ones like TMI-2, identifies the resources currently available and makes recommendations for the design and construction of additional mobile accident response resources to supplement those already in existence. This project is referred to as the Mobile Accident Response Capability (MARC) program

  20. Application of Whole Body Counter to Neutron Dose Assessment in Criticality Accidents

    Energy Technology Data Exchange (ETDEWEB)

    Kurihara, O.; Tsujimura, N.; Takasaki, K.; Momose, T.; Maruo, Y. [Japan Nuclear Cycle Development Institute, Tokai (Japan)

    2001-09-15

    Neutron dose assessment in criticality accidents using Whole Body Counter (WBC) was proved to be an effective method as rapid neutron dose estimation at the JCO criticality accident in Tokai-mura. The 1.36MeV gamma-ray of {sup 24}Na in a body can be detected easily by a germanium detector. The Minimum Detectable Activity (MDA) of {sup 24}Na is approximately 50Bq for 10minute measurement by the germanium-type whole body counter at JNC Tokai Works. Neutron energy spectra at the typical shielding conditions in criticality accidents were calculated and the conversion factor, whole body activity-to-organ mass weighted neutron absorbed dose, corresponding to each condition were determined. The conversion factor for uncollied fission spectrum is 7.7 [(Bq{sup 24}Na/g{sup 23}Na)/mGy].

  1. Cosyma a new programme package for accident consequence assessment

    International Nuclear Information System (INIS)

    Kelly, G.N.

    1991-01-01

    This report gives details of a new programme package for accident consequence assessment, prepared under the CEC's Maria programme (Methods for assessing the radiological impact of accidents) initiated in 1982 to review and build on the nuclear accident consequence assessment methods in use within the European Community

  2. Microbial aerosol generation during laboratory accidents and subsequent risk assessment.

    Science.gov (United States)

    Bennett, A; Parks, S

    2006-04-01

    To quantify microbial aerosols generated by a series of laboratory accidents and to use these data in risk assessment. A series of laboratory accident scenarios have been devised and the microbial aerosol generated by them has been measured using a range of microbial air samplers. The accident scenarios generating the highest aerosol concentrations were, dropping a fungal plate, dropping a large bottle, centrifuge rotor leaks and a blocked syringe filter. Many of these accidents generated low particle size aerosols, which would be inhaled into the lungs of any exposed laboratory staff. Spray factors (SFs) have been calculated using the results of these experiments as an indicator of the potential for accidents to generate microbial aerosols. Model risk assessments have been described using the SF data. Quantitative risk assessment of laboratory accidents can provide data that can aid the design of containment laboratories and the response to laboratory accidents. A methodology has been described and supporting data provided to allow microbiological safety officers to carry out quantitative risk assessment of laboratory accidents.

  3. Swedish REGULATORY APPROACH TO SAFETY Assessment AND SEVERE ACCIDENT MANAGEMENT

    International Nuclear Information System (INIS)

    Frid, W.; Sandervaag, O.

    1997-01-01

    The Swedish regulatory approach to safety assessment and severe accident management is briefly described. The safety assessment program, which focuses on prevention of incidents and accidents, has three main components: periodic safety reviews, probabilistic safety analysis, and analysis of postulated disturbances and accident progression sequences. Management and man-technology-organisation issues, as well as inspections, play a key role in safety assessment. Basis for severe accident management were established by the Government decisions in 1981 and 1986. By the end of 1988, the severe accident mitigation systems and emergency operating procedures were implemented at all Swedish reactors. The severe accident research has continued after 1988 for further verification of the protection provided by the systems and reduction of remaining uncertainties in risk dominant phenomena

  4. Internal dose assessment in radiation accidents

    International Nuclear Information System (INIS)

    Toohey, R.E.

    2003-01-01

    Although numerous models have been developed for occupational and medical internal dosimetry, they may not be applicable to an accident situation. Published dose coefficients relate effective dose to intake, but if acute deterministic effects are possible, effective dose is not a useful parameter. Consequently, dose rates to the organs of interest need to be computed from first principles. Standard bioassay methods may be used to assess body contents, but, again, the standard models for bioassay interpretation may not be applicable because of the circumstances of the accident and the prompt initiation of decorporation therapy. Examples of modifications to the standard methodologies include adjustment of biological half-times under therapy, such as in the Goiania accident, and the same effect, complicated by continued input from contaminated wounds, in the Hanford 241 Am accident. (author)

  5. Accident Assessment

    International Nuclear Information System (INIS)

    Tripputi, Ivo; Lund, Ingemar

    2002-01-01

    There is a general feeling that decommissioning is an activity involving limited risks, compared to NPP operation, and in particular risks involving the general public. This is technically confirmed by licensing analysis and evaluations, where, once the spent fuel has been removed from the plant, the radioactivity inventory available to be released to the environment is very limited. Decommissioning activities performed so far in the world have also confirmed the first assumptions and no specific issue has been identified, in this field, to justify a completely new approach. Commercial interests in international harmonization, which could drive an in-depth discussion about the bases of this approach, are weak at the moment. However, there are several reasons why a discussion in an international framework about the Safety Case for decommissioning (and, in particular, about Accident Assessment) may be considered necessary and important, and why it may show some specific and peculiar aspects. An effort for a comprehensive and systematic D and D accident safety assessment of the decommissioning process is justified. It is necessary also to explore in a holistic way the aspects of industrial safety, and develop tools for the decision-making process optimization. The expected results are the implementation of appropriate and optimized protective measures in any event and of adequate on/off-site emergency plans for optimal public and workers protection. The experience from other decommissioning projects and large-scale industrial activities is essential to balance provisions and an Operating Experience review process (specific for decommissioning) should help to focus on real issues

  6. Verification of computer system PROLOG - software tool for rapid assessments of consequences of short-term radioactive releases to the atmosphere

    Energy Technology Data Exchange (ETDEWEB)

    Kiselev, Alexey A.; Krylov, Alexey L.; Bogatov, Sergey A. [Nuclear Safety Institute (IBRAE), Bolshaya Tulskaya st. 52, 115191, Moscow (Russian Federation)

    2014-07-01

    In case of nuclear and radiation accidents emergency response authorities require a tool for rapid assessments of possible consequences. One of the most significant problems is lack of data on initial state of an accident. The lack can be especially critical in case the accident occurred in a location that was not thoroughly studied beforehand (during transportation of radioactive materials for example). One of possible solutions is the hybrid method when a model that enables rapid assessments with the use of reasonable minimum of input data is used conjointly with an observed data that can be collected shortly after accidents. The model is used to estimate parameters of the source and uncertain meteorological parameters on the base of some observed data. For example, field of fallout density can be observed and measured within hours after an accident. After that the same model with the use of estimated parameters is used to assess doses and necessity of recommended and mandatory countermeasures. The computer system PROLOG was designed to solve the problem. It is based on the widely used Gaussian model. The standard Gaussian model is supplemented with several sub-models that allow to take into account: polydisperse aerosols, aerodynamic shade from buildings in the vicinity of the place of accident, terrain orography, initial size of the radioactive cloud, effective height of the release, influence of countermeasures on the doses of radioactive exposure of humans. It uses modern GIS technologies and can use web map services. To verify ability of PROLOG to solve the problem it is necessary to test its ability to assess necessary parameters of real accidents in the past. Verification of the computer system on the data of Chazhma Bay accident (Russian Far East, 1985) was published previously. In this work verification was implemented on the base of observed contamination from the Kyshtym disaster (PA Mayak, 1957) and the Tomsk accident (1993). Observations of Sr-90

  7. Assessing economic consequences of radiation accidents

    International Nuclear Information System (INIS)

    Rowe, M.D.; Lee, J.C.; Grimshaw, C.A.; Kalb, P.D.

    1987-01-01

    This project reviewed the literature on the economic consequences of accidents to determine the availability of assessment methods and data and their applicability to the high-level radioactive waste (HLW) disposal system before closure; determined needs for expansion, revision, or adaptation of methods and data for modeling economic consequences of accidents of the scale projected for the disposal system; and gathered data that might be useful for the needed revisions. 8 refs., 1 tab

  8. Assessment of CRBR core disruptive accident energetics

    International Nuclear Information System (INIS)

    Theofanous, T.G.; Bell, C.R.

    1984-03-01

    The results of an independent assessment of core disruptive accident energetics for the Clinch River Breeder Reactor are presented in this document. This assessment was performed for the Nuclear Regulatory Commission under the direction of the CRBR Program Office within the Office of Nuclear Reactor Regulation. It considered in detail the accident behavior for three accident initiators that are representative of three different classes of events; unprotected loss of flow, unprotected reactivity insertion, and protected loss of heat sink. The primary system's energetics accommodation capability was realistically, yet conservatively, determined in terms of core events. This accommodation capability was found to be equivalent to an isentropic work potential for expansion to one atmosphere of 2550 MJ or a ramp rate of about 200 $/s applied to a classical two-phase disassembly

  9. Accident assessment under emergency situation in Daya Bay nuclear power station

    International Nuclear Information System (INIS)

    Yang Ling; Chen Degan; Lin Shumou; Fu Guohui

    2004-01-01

    The accident assessment under emergency situation includes the accident status evaluation and its consequence estimation. This paper introduces evaluation methods for accident status and its assistant computer system (SESAME-GNP) utilized during the emergency situation in Guangdong Daya Bay Nuclear Power Station (GNPS) in detail. At the same time, an improved accident consequence estimation system in GNPS (RACAS-GNP) is briefly described. With the improvement of the accident assessment systems, the capability of emergency response in GNPS is strengthened

  10. Study on the experimental VHTR safety with analysis for a hypothetical rapid depressurization accident

    International Nuclear Information System (INIS)

    Mitake, S.; Suzuki, K.; Ohno, T.; Okada, T.

    1982-01-01

    A hypothetical rapid depressurization accident of the experimental VHTR has been analyzed, including all phenomena in the accident, from its initiating depressurization of the coolant to consequential radiological hazard. Based on reliability analysis of the engineered safety features, all possible sequences, in which the safety systems are in success or in failure, have been investigated with event tree analysis. The result shows the inherent safety characteristics of the reactor and the effectiveness of the engineered safety features. And through the analysis, it has been indicated that further investigations on some phenomena in the accident, e.g., air ingress by natural circulation flow and fission product transport in the plant, will bring forth more reasonable and sufficient safety of the reactor

  11. Accident consequence assessment code development

    International Nuclear Information System (INIS)

    Homma, T.; Togawa, O.

    1991-01-01

    This paper describes the new computer code system, OSCAAR developed for off-site consequence assessment of a potential nuclear accident. OSCAAR consists of several modules which have modeling capabilities in atmospheric transport, foodchain transport, dosimetry, emergency response and radiological health effects. The major modules of the consequence assessment code are described, highlighting the validation and verification of the models. (author)

  12. Rapid and reliable predictions of the radiological consequences of accidents as an aid to decisions on countermeasures

    International Nuclear Information System (INIS)

    Kelly, G.N.

    1990-01-01

    The rapid and reliable assessment of the potential radiological consequences of an accident at a nuclear installation is an essential input to timely decisions on the effective introduction of countermeasures. There have been considerable improvements over the past decade or so in the methods used for such assessments and, in particular, in the development of computerized systems. The need for such systems is described, together with their current state of development and possible future trends. This topic has featured prominently within the CEC's Radiation Protection Research Programme and is likely to do so far the foreseeable future. The main features of this research, its achievements to date and future directions are described

  13. Assessment of accident risks in the CRBRP. Volume 2. Appendices

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-03-01

    Appendices to Volume I include core-related accident-sequence definition, CRBRP risk-assessment sequence-probability determinations, failure-probability data, accident scenario evaluation, radioactive material release analysis, ex-core accident analysis, safety philosophy and design features, calculation of reactor accident consequences, sensitivity study, and risk from fires.

  14. Developing and assessing accident management plans for nuclear power plants

    International Nuclear Information System (INIS)

    Hanson, D.J.; Johnson, S.P.; Blackman, H.S.; Stewart, M.A.

    1992-07-01

    This document is the second of a two-volume NUREG/CR that discusses development of accident management plans for nuclear power plants. The first volume (a) describes a four-phase approach for developing criteria that could be used for assessing the adequacy of accident management plans, (b) identifies the general attributes of accident management plans (Phase 1), (c) presents a prototype process for developing and implementing severe accident management plans (Phase 2), and (d) presents criteria that can be used to assess the adequacy of accident management plans. This volume (a) describes results from an evaluation of the capabilities of the prototype process to produce an accident management plan (Phase 3) and (b), based on these results and preliminary criteria included in NUREG/CR-5543, presents modifications to the criteria where appropriate

  15. The Fukushima Daiichi Accident. Technical Volume 2/5. Safety Assessment

    International Nuclear Information System (INIS)

    2015-08-01

    Technical Volume 1 of this report has described what happened during the accident at the Fukushima Daiichi nuclear power plant (NPP). This volume begins (Section 2.1) with a review of how the design basis of the site for external events was assessed initially and then reassessed over the life of the NPP. The section also describes the physical changes that were made to the units as a result. The remainder of the volume describes the treatment of beyond design basis events in the safety assessment of the site, the accident management provisions, the effectiveness of regulatory programmes, human and organizational factors and the safety culture, and the role of operating experience. Further background information is contained in three annexes included on the CD-ROM of this Technical Volume which describe analytical investigations of the accident along with information on topics such as system performance, defence in depth and severe accident phenomena. Section 2.2 provides an assessment of the systems that failed, resulting in a failure to maintain the fundamental safety functions in Units 1–3, which were in operation at the time of the tsunami and in which the reactor pressure vessels (RPV) and containment vessels failed. The section also describes Units 4-6, which were shut down at the time of the tsunami, and the site’s central spent fuel storage facility. Section 2.3 discusses the probabilistic and deterministic safety assessments of beyond design basis accidents (BDBAs) that had been performed for the plant and the insights from these assessments that had led to changes in the plant’s design. The section pays particular attention to the assessment of extreme natural hazards, such as the one which led to the total loss of AC power supply on the site. The additional loss of DC power supply in Units 1 and 2 played a key role in the progression of the accident because it impeded the diagnosis of plant conditions and made the operators unaware of the status of

  16. EPRI nuclear fuel-cycle accident risk assessment

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    The present results of the nuclear fuel-cycle accident risk assessment conducted by the Electric Power Research Institute show that the total risk contribution of the nuclear fuel cycle is only approx. 1% of the accident risk of the power plant; hence, with little error, the accident risk of nuclear electric power is essentially that of the power plant itself. The power-plant risk, assuming a very large usage of nuclear power by the year 2005 is only approx. 0.5% of the radiological risk of natural background. The smallness of the fuel-cycle risk relative to the power-plant risk may be attributed to the lack of internal energy to drive an accident and the small amount of dispersible material. This work aims at a realistic assessment of the process hazards, the effectiveness of confinement and mitigation systems and procedures, and the associated likelihood of errors and the estimated size of errors. The primary probabilistic estimation tool is fault-tree analysis, with the release source terms calculated using physicochemical processes. Doses and health effects are calculated with CRAC (Consequences of Reactor Accident Code). No evacuation or mitigation is considered; source terms may be conservative through the assumption of high fuel burnup (40,000 MWd/t) and short cooling period (90 to 150 d); high-efficiency particulate air filter efficiencies are derived from experiments

  17. A framework for assessing severe accident management strategies

    International Nuclear Information System (INIS)

    Kastenberg, W.E.; Apostolakis, G.; Dhir, V.K.; Okrent, D.; Jae, M.; Lim, H.; Milici, T.; Park, H.; Swider, J.; Xing, L.; Yu, D.

    1991-01-01

    Accident management can be defined as the innovative use of existing and or alternative resources, systems and actions to prevent or mitigate a severe accident. Together with risk management (changes in plant operation and/or addition of equipment) and emergency planning (off-site actions), accident management provides an extension of the defense-in-depth safety philosophy for severe accidents. A significant number of probabilistic safety assessments (PSA) have been completed which yield the principal plant vulnerabilities. For each sequence/threat and each combination of strategy there may be several options available to the operator. Each strategy/option involves phenomenological and operational considerations regarding uncertainty. These considerations include uncertainty in key phenomena, uncertainty in operator behavior, uncertainty in system availability and behavior, and uncertainty in available information (i.e., instrumentation). The objective of this project is to develop a methodology for assessing severe accident management strategies given the key uncertainties mentioned above. Based on Decision Trees and Influence Diagrams, the methodology is currently being applied to two case studies: cavity flooding in a PWR to prevent vessel penetration or failure, and drywell flooding in a BWR to prevent containment failure

  18. Severe accidents risk assessment as a basis for emergency preparedness

    International Nuclear Information System (INIS)

    Sinka, D.; Mikulicic, V.

    2000-01-01

    The paper demonstrates, by example of the Republic of Croatia, the possibilities of implementing risk assessment as basis for nuclear accident emergency preparedness development. Individual risks of severe accidents for citizens of the biggest Croatian population centers, as well as collective risk for entire population have been assessed using the PRONEL method. The assessment covered 90 power reactors located at a distance up to 1.000 km. The conducted assessment shows the risks for various regions of the Republic of Croatia, and comparison between them. If risk would be taken as basic criterion in nuclear emergency planning, the results of assessment would directly indicate the necessary preparation level for each region. Furthermore, the assessment of risks from individual power plants and power plant types indicates to which facilities the greatest attention should be paid in nuclear accidents preparedness development. Risks from groups of power plants formed in accordance with their respective distance from exposure location shows what kind of tools for determining consequences and protective actions during a nuclear accident should be made available. (author)

  19. Comparative assessment of severe accident risks in the energy sector

    International Nuclear Information System (INIS)

    Hirschberg, S.; Spiekerman, G.; Dones, R.

    1997-01-01

    This paper addresses one of the major limitations of the current comparative studies of environmental and health impacts of energy systems, i.e. the treatment of severe accidents. The work covers technical aspects of severe accidents and thus primarily reflects an engineering perspective on the energy-related risk issues. The assessments concern full energy chains associated with fossil sources (coal, oil and gas), nuclear power and hydro power. A comprehensive severe accidents database has been established. Thanks to the variety of information sources used, it exhibits in comparison with other corresponding databases a far more extensive coverage of the energy-related accidents. For hypothetical nuclear accidents the probabilistic approach has been employed and extended to cover the economic consequences of power reactor accidents. Results of comparisons between the various energy chains are shown and discussed along with a number of current issues in comparative assessment of severe accidents. As opposed to the previous studies, the aim of the present work has been, to cover whenever possible, a relatively broad spectrum of damage categories of interest. (author) 5 figs., 1 tab., 18 refs

  20. Comparative study on aerosol removal by natural processes in containment in severe accident for AP1000 reactor

    International Nuclear Information System (INIS)

    Sun, Xiaohui; Cao, Xinrong; Shi, Xingwei; Yan, Jin

    2017-01-01

    Highlights: • Characteristics of aerosol distribution in containment are obtained. • Aerosol removal by natural processes is comparative studied by two methods. • Traditional rapid assessment method is conservative and can be applied in AP1000 reactor. - Abstract: Focusing on aerosol removal by naturally occurring processes in containment in severe accident for AP1000, integral severe accident code MELCOR and rapid assessment method mentioned in NUREG/CR-6189 are utilized to study aerosol removal by natural processes, respectively. Three typical severe accidents, induced by large break loss of coolant accident (LBLOCA), small break loss of coolant accident (SBLOCA) and steam generator tube rupture (SGTR), respectively, are selected for the study. The results obtained by two methods were further compared in the following several aspects: efficiency of aerosol removal by natural processes, peak time of aerosol suspended in containment atmosphere, peak amount of aerosol suspended in containment atmosphere, time when aerosol removal efficiency by natural processes is up to 99.9%. It was further concluded that results obtained by rapid assessment with shorter calculation process are more conservative. The analysis results provide reference to assessment method selection of severe accident source term for AP1000 nuclear emergency.

  1. RAPID-N: Assessing and mapping the risk of natural-hazard impact at industrial installations

    Science.gov (United States)

    Girgin, Serkan; Krausmann, Elisabeth

    2015-04-01

    Natural hazard-triggered technological accidents (so-called Natech accidents) at hazardous installations can have major consequences due to the potential for release of hazardous materials, fires and explosions. Effective Natech risk reduction requires the identification of areas where this risk is high. However, recent studies have shown that there are hardly any methodologies and tools that would allow authorities to identify these areas. To work towards closing this gap, the European Commission's Joint Research Centre has developed the rapid Natech risk assessment and mapping framework RAPID-N. The tool, which is implemented in an online web-based environment, is unique in that it contains all functionalities required for running a full Natech risk analysis simulation (natural hazards severity estimation, equipment damage probability and severity calculation, modeling of the consequences of loss of containment scenarios) and for visualizing its results. The output of RAPID-N are risk summary reports and interactive risk maps which can be used for decision making. Currently, the tool focuses on Natech risk due to earthquakes at industrial installations. However, it will be extended to also analyse and map Natech risk due to floods in the near future. RAPID-N is available at http://rapidn.jrc.ec.europa.eu. This presentation will discuss the results of case-study calculations performed for selected flammable and toxic substances to test the capabilities of RAPID-N both for single- and multi-site earthquake Natech risk assessment. For this purpose, an Istanbul earthquake scenario provided by the Turkish government was used. The results of the exercise show that RAPID-N is a valuable decision-support tool that assesses the Natech risk and maps the consequence end-point distances. These end-point distances are currently defined by 7 kPa overpressure for Vapour Cloud Explosions, 2nd degree burns for pool fire (which is equivalent to a heat radiation of 5 kW/m2 for 40s

  2. Key risk indicators for accident assessment conditioned on pre-crash vehicle trajectory.

    Science.gov (United States)

    Shi, X; Wong, Y D; Li, M Z F; Chai, C

    2018-08-01

    Accident events are generally unexpected and occur rarely. Pre-accident risk assessment by surrogate indicators is an effective way to identify risk levels and thus boost accident prediction. Herein, the concept of Key Risk Indicator (KRI) is proposed, which assesses risk exposures using hybrid indicators. Seven metrics are shortlisted as the basic indicators in KRI, with evaluation in terms of risk behaviour, risk avoidance, and risk margin. A typical real-world chain-collision accident and its antecedent (pre-crash) road traffic movements are retrieved from surveillance video footage, and a grid remapping method is proposed for data extraction and coordinates transformation. To investigate the feasibility of each indicator in risk assessment, a temporal-spatial case-control is designed. By comparison, Time Integrated Time-to-collision (TIT) performs better in identifying pre-accident risk conditions; while Crash Potential Index (CPI) is helpful in further picking out the severest ones (the near-accident). Based on TIT and CPI, the expressions of KRIs are developed, which enable us to evaluate risk severity with three levels, as well as the likelihood. KRI-based risk assessment also reveals predictive insights about a potential accident, including at-risk vehicles, locations and time. Furthermore, straightforward thresholds are defined flexibly in KRIs, since the impact of different threshold values is found not to be very critical. For better validation, another independent real-world accident sample is examined, and the two results are in close agreement. Hierarchical indicators such as KRIs offer new insights about pre-accident risk exposures, which is helpful for accident assessment and prediction. Copyright © 2018 Elsevier Ltd. All rights reserved.

  3. Comparative Assessment of Severe Accidents in the Chinese Energy Sector

    Energy Technology Data Exchange (ETDEWEB)

    Hirschberg, S; Burgherr, P; Spiekerman, G; Cazzoli, E; Vitazek, J; Cheng, L

    2003-03-01

    This report deals with the comparative assessment of accidents risks characteristic for the various electricity supply options. A reasonably complete picture of the wide spectrum of health, environmental and economic effects associated with various energy systems can only be obtained by considering damages due to normal operation as well as due to accidents. The focus of the present work is on severe accidents, as these are considered controversial. By severe accidents we understand potential or actual accidents that represent a significant risk to people, property and the environment and may lead to large consequences. (author)

  4. Determining cutoff distances for assessing risks from transportation accident radiation releases

    International Nuclear Information System (INIS)

    Sandquist, G.M.; Slaughter, D.M.; Kimura, C.Y.; Brumburgh, G.

    1995-01-01

    The transportation of radioactive materials throughout the United States and the world is a ubiquitous and sometimes controversial activity. Almost universally, these transportation activities have been performed without major incident, and the safety record for transportation of radioactive material is outstanding compared with the transportation of other hazardous materials. Nevertheless, concerns still exist regarding adequate regulation of radioactive material transportation and accurate assessment of the health risks associated with accidents. These concerns are addressed through certification by the cognizant regulatory authority over the transportation container or the performance of a transportation risk assessment. In a transportation risk assessment, accident situations are examined, frequencies are estimated, and consequences resulting from the accident are analyzed and evaluated for acceptance. A universal question with any transportation risk assessment that examines the radiological consequences from release accidents is, At what distance may the dispersion analysis be terminated? This paper examines cutoff distances and their consequences for assessing health risks from radiological transportation releases

  5. New methods for rapid data acquisition of contaminated land cover after NPP accident

    International Nuclear Information System (INIS)

    Hulka, J.; Cespirova, I.

    2009-01-01

    Aim of the research project is the analysis of the modem and rapid reliable data acquisition methods for agricultural countermeasures, feed-stuff restrictions and clean-up of large contaminated areas after NPP accident. Acquiring agricultural reliable data especially based on satellite technology and analysis of landscape contamination (based on computer code vs. in situ measurements, airborne and/or terrestrial mapping of contamination) are discussed. (authors)

  6. New methods for rapid data acquisition of contaminated land cover after NPP accident

    International Nuclear Information System (INIS)

    Hulka, J.; Cespirova, I.

    2008-01-01

    Aim of the research project is the analysis of the modem and rapid reliable data acquisition methods for agricultural countermeasures, feed-stuff restrictions and clean-up of large contaminated areas after NPP accident. Acquiring agricultural reliable data especially based on satellite technology and analysis of landscape contamination (based on computer code vs. in situ measurements, airborne and/or terrestrial mapping of contamination) are discussed. (authors)

  7. Identification and assessment of BWR in-vessel severe accident mitigation strategies

    International Nuclear Information System (INIS)

    Hodge, S.A.; Kress, T.S.; Cleveland, J.C.; Petek, M.

    1992-01-01

    This paper briefly describes the results of work carried out in support of the US Nuclear Regulatory Commission Accident Management Research Program to evaluate the effectiveness and feasibility of current and proposed strategies for BWR severe accident management. These results are described in detail in the just-released report Identification and Assessment of BWR In-Vessel Severe Accident Mitigation Strategies, NUREG/CR-5869, which comprises three categories of findings. First, an assessment of the current status of accident management strategies for the mitigation of in-vessel events for BWR severe accident sequences is combined with a review of the BWR Owners' Group Emergency Procedure Guidelines (EPGs) to determine the extent to which they currently address the characteristic events of an unmitigated severe accident. Second, where considered necessary, new candidate accident management strategies are proposed for mitigation of the late-phase (after core damage has occurred) events. Finally, two of the four candidate strategies identified by this effort are assessed in detail. These are (1) preparation of a boron solution for reactor vessel refill should control blade damage occur during a period of temporary core dryout and (2) containment flooding to maintain the core debris within the reactor vessel if the injection systems cannot be restored

  8. The Development of Marine Accidents Human Reliability Assessment Approach: HEART Methodology and MOP Model

    Directory of Open Access Journals (Sweden)

    Ludfi Pratiwi Bowo

    2017-06-01

    Full Text Available Humans are one of the important factors in the assessment of accidents, particularly marine accidents. Hence, studies are conducted to assess the contribution of human factors in accidents. There are two generations of Human Reliability Assessment (HRA that have been developed. Those methodologies are classified by the differences of viewpoints of problem-solving, as the first generation and second generation. The accident analysis can be determined using three techniques of analysis; sequential techniques, epidemiological techniques and systemic techniques, where the marine accidents are included in the epidemiological technique. This study compares the Human Error Assessment and Reduction Technique (HEART methodology and the 4M Overturned Pyramid (MOP model, which are applied to assess marine accidents. Furthermore, the MOP model can effectively describe the relationships of other factors which affect the accidents; whereas, the HEART methodology is only focused on human factors.

  9. Dosimetric management during a criticality accident

    International Nuclear Information System (INIS)

    Lebaron-Jacobs, L.; Fottorino, R.; Racine, Y.; Miele, A.; Barbry, F.; Briot, F.; Distinguin, S.; Le Goff, J.P.; Berard, P.; Boisson, P.; Cavadore, D.; Lecoix, G.; Persico, M.H.; Rongier, E.; Challeton-De Vathaire, C.; Medioni, R.; Voisin, P.; Exmelin, L.; Flury-Herard, A.; Gaillard-Lecanu, E.; Lemaire, G.; Gonin, M.; Riasse, C.

    2008-01-01

    A working group from health occupational and clinical biochemistry services on French sites has issued essential data sheets on the guidelines to follow in managing the victims of a criticality accident. Since the priority of the medical management after a criticality accident is to assess the dose and the distribution of dose, some dosimetric investigations have been selected in order to provide a prompt response and to anticipate the final dose reconstruction. Comparison exercises between clinical biochemistry laboratories on French sites were carried out to confirm that each laboratory maintained the required operational methods for hair treatment and the appropriate equipment for 32 P activity in hair and 24 Na activity in blood measurements, and to demonstrate its ability to rapidly provide neutron dose estimates after a criticality accident. As a result, a relation has been assessed to estimate the dose and the distribution of dose according to the neutron spectrum following a criticality accident. (authors)

  10. Rapid Assessment of Environmental Health Impacts for Policy Support: The Example of Road Transport in New Zealand

    Directory of Open Access Journals (Sweden)

    David Briggs

    2015-12-01

    Full Text Available An integrated environmental health impact assessment of road transport in New Zealand was carried out, using a rapid assessment. The disease and injury burden was assessed from traffic-related accidents, air pollution, noise and physical (inactivity, and impacts attributed back to modal source. In total, road transport was found to be responsible for 650 deaths in 2012 (2.1% of annual mortality: 308 from traffic accidents, 283 as a result of air pollution, and 59 from noise. Together with morbidity, these represent a total burden of disease of 26,610 disability-adjusted life years (DALYs. An estimated 40 deaths and 1874 DALYs were avoided through active transport. Cars are responsible for about 52% of attributable deaths, but heavy goods vehicles (6% of vehicle kilometres travelled, vkt accounted for 21% of deaths. Motorcycles (1 per cent of vkt are implicated in nearly 8% of deaths. Overall, impacts of traffic-related air pollution and noise are low compared to other developed countries, but road accident rates are high. Results highlight the need for policies targeted at road accidents, and especially at heavy goods vehicles and motorcycles, along with more general action to reduce the reliance on private road transport. The study also provides a framework for national indicator development.

  11. Relationships of working conditions, health problems and vehicle accidents in bus rapid transit (BRT) drivers.

    Science.gov (United States)

    Gómez-Ortiz, Viviola; Cendales, Boris; Useche, Sergio; Bocarejo, Juan P

    2018-04-01

    The aim of this study was to estimate accident risk rates and mental health of bus rapid transit (BRT) drivers based on psychosocial risk factors at work leading to increased stress and health problems. A cross-sectional research design utilized a self-report questionnaire completed by 524 BRT drivers. Some working conditions of BRT drivers (lack of social support from supervisors and perceived potential for risk) may partially explain Bogota's BRT drivers' involvement in road accidents. Drivers' mental health problems were associated with higher job strain, less support from co-workers, fewer rewards and greater signal conflict while driving. To prevent bus accidents, supervisory support may need to be increased. To prevent mental health problems, other interventions may be needed such as reducing demands, increasing job control, reducing amount of incoming information, simplifying current signals, making signals less contradictory, and revising rewards. © 2018 Wiley Periodicals, Inc.

  12. Accident frequency and unrealistic optimism: Children's assessment of risk.

    Science.gov (United States)

    Joshi, Mary Sissons; Maclean, Morag; Stevens, Claire

    2018-02-01

    Accidental injury is a major cause of mortality and morbidity among children, warranting research on their risk perceptions. Three hundred and seven children aged 10-11 years assessed the frequency, danger and personal risk likelihood of 8 accidents. Two social-cognitive biases were manifested. The frequency of rare accidents (e.g. drowning) was overestimated, and the frequency of common accidents (e.g. bike accidents) underestimated; and the majority of children showed unrealistic optimism tending to see themselves as less likely to suffer these accidents in comparison to their peers, offering superior skills or parental control of the environment as an explanation. In the case of pedestrian accidents, children recognised their seriousness, underestimated the frequency of this risk and regarded their own road crossing skill as protection. These findings highlight the challenging task facing safety educators who, when teaching conventional safety knowledge and routines, also need to alert children to the danger of over-confidence without disabling them though fear. Copyright © 2017 Elsevier Ltd. All rights reserved.

  13. The Development of Marine Accidents Human Reliability Assessment Approach: HEART Methodology and MOP Model

    OpenAIRE

    Ludfi Pratiwi Bowo; Wanginingastuti Mutmainnah; Masao Furusho

    2017-01-01

    Humans are one of the important factors in the assessment of accidents, particularly marine accidents. Hence, studies are conducted to assess the contribution of human factors in accidents. There are two generations of Human Reliability Assessment (HRA) that have been developed. Those methodologies are classified by the differences of viewpoints of problem-solving, as the first generation and second generation. The accident analysis can be determined using three techniques of analysis; sequen...

  14. Chernobyl accident: Assessing the data

    Energy Technology Data Exchange (ETDEWEB)

    Soerensen, B

    1986-01-01

    Data presented in the official Soviet report to the IAEA on the Chernobyl reactor accident are critically assessed. Special attention is given to the derivation of release fractions from fallout measurements, a procedure which is demonstrated to involve large elements of uncertainty. Further comments relate to estimates of plume rise and deposition velocity. A comparison is made with the predictions of previously published theoretical reactor safety studies.

  15. 77 FR 61446 - Proposed Revision Probabilistic Risk Assessment and Severe Accident Evaluation for New Reactors

    Science.gov (United States)

    2012-10-09

    ... Severe Accident Evaluation for New Reactors AGENCY: Nuclear Regulatory Commission. ACTION: Standard... its Standard Review Plan (SRP), Section 19.0, ``Probabilistic Risk Assessment and Severe Accident... assessment (PRA) information and severe accident assessments for new reactors submitted to support design...

  16. Assessment of risk of accident at work as an indicator of safe behaviour of workers

    Energy Technology Data Exchange (ETDEWEB)

    Pisiewicz, K

    1978-10-01

    In 1977 the Psychology and Sociology Research Development Unit of the Central Mining Institute carried out research on the influence of assessment of the accident risk on the safe behaviour of workers. 450 workers employed at the longwall faces in 6 coal mines with various accident rates were questioned. It was found that a low assessment of risk favours hazardous operations, contrary to the principles of work safety, while a high assessment of the risk does not favour hazardous operations. Miners employed in coal mines with high accident rates tend to a low assessment of accident risk (arithmetic mean x 48.54) in comparison to miners from mines with low accident rates (arithmetic mean x 53.68). It was also found that the arithmetic mean of assessment of risks among workers who had had an accident at work is lower (x 50.3) than among workers who had not yet had an accident at work (x 55.32).

  17. Method of assessing severe accident management strategies

    International Nuclear Information System (INIS)

    Kastenberg, W.E.; Apostolakis, G.; Dhir, V.K.; Okrent, D.; Jae, M.; Lim, H.; Milici, T.; Park, H.; Swider, J.; Xing, L.; Yu, D.

    1991-01-01

    Accident management can be defined as the innovative use of existing and or alternative resources, systems, and actions to prevent or mitigate a severe accident. A significant number of probabilistic safety assessments (PSAs) have been completed that yield the principal plant vulnerabilities. These vulnerabilities can be categorized as (1) dominant sequences with respect to core-melt frequency. (2) dominant sequences with respect to various risk measures. (3) dominant threats that challenge safety functions. (4) dominant threats with respect to failure of safety systems. For each sequence/threat and each combination of strategy, there may be several options available to the operator. Each strategy/option involves phenomenological and operational considerations regarding uncertainty. These considerations include uncertainties in key phenomena, operator behavior, system availability and behavior, and available information. This paper presents a methodology for assessing severe accident management strategies given the key uncertainties delineated at two workshops held at the University of California, Los Angeles. Based on decision trees and influence diagrams, the methodology is currently being applied to two case studies: cavity flooding in a pressurized water reactor (PWR) to prevent vessel penetration or failure, and drywell flooding in a boiling water reactor to prevent vessel and/or containment failure

  18. A framework for the assessment of severe accident management strategies

    International Nuclear Information System (INIS)

    Kastenberg, W.E.; Apostolakis, G.; Dhir, V.K.; Okrent, D.; Jae, M.; Lim, H.; Milici, T.; Park, H.; Swider, J.; Xing, L.; Yu, D.

    1992-01-01

    Accident management can be defined as the innovative use of existing and or alternative resources, systems and actions to prevent or mitigate a severe accident. Together with risk management (changes in plant operation and/or addition of equipment) and emergency planning (off-site actions), accident management provides an extension of the defense-in-depth safety philosophy for severe accidents. A significant number of probabilistic safety assessments (PSA) have been completed which yield the principal plant vulnerabilities. For each sequence/threat and each combination of strategy there may be several options available to the operator. Each strategy/option involves phenomenological and operational considerations regarding uncertainty. These considerations include uncertainty in key phenomena, uncertainty in operator behavior, uncertainty in system availability and behavior, and uncertainty in available information (i.e., instrumentation). The objective of this project is to develop a methodology for assessing severe accident management strategies given the key uncertainties mentioned above. Based on decision trees and influence diagrams, the methodology is currently being applied to two case studies: cavity flooding in a pressurized water reactor to prevent vessel penetration or failure, and drywell flooding in a boiling water reactor to prevent containment failure

  19. Identification and assessment of BWR in-vessel severe accident mitigation strategies

    Energy Technology Data Exchange (ETDEWEB)

    Hodge, S.A.; Cleveland, J.C.; Kress, T.S.; Petek, M. [Oak Ridge National Lab., TN (United States)

    1992-10-01

    This report provides the results of work carried out in support of the US Nuclear Regulatory Commission Accident Management Research Program to develop a technical basis for evaluating the effectiveness and feasibility of current and proposed strategies for boiling water reactor (BWR) severe accident management. First, the findings of an assessment of the current status of accident management strategies for the mitigation of in-vessel events for BWR severe accident sequences are described. This includes a review of the BWR Owners` Group Emergency Procedure Guidelines (EPGSs) to determine the extent to which they currently address the characteristic events of an unmitigated severe accident and to provide the basis for recommendations for enhancement of accident management procedures. Second, where considered necessary, new candidate accident management strategies are proposed for mitigation of the late-phase (after core damage has occurred) events. Finally, recommendations are made for consideration of additional strategies where warranted, and two of the four candidate strategies identified by this effort are assessed in detail: (1) preparation of a boron solution for reactor vessel refill should control blade damage occur during a period of temporary core dryout and (2) containment flooding to maintain the core debris within the reactor vessel if the injection systems cannot be restored.

  20. Identification and assessment of BWR in-vessel severe accident mitigation strategies

    International Nuclear Information System (INIS)

    Hodge, S.A.; Cleveland, J.C.; Kress, T.S.; Petek, M.

    1992-10-01

    This report provides the results of work carried out in support of the US Nuclear Regulatory Commission Accident Management Research Program to develop a technical basis for evaluating the effectiveness and feasibility of current and proposed strategies for boiling water reactor (BWR) severe accident management. First, the findings of an assessment of the current status of accident management strategies for the mitigation of in-vessel events for BWR severe accident sequences are described. This includes a review of the BWR Owners' Group Emergency Procedure Guidelines (EPGSs) to determine the extent to which they currently address the characteristic events of an unmitigated severe accident and to provide the basis for recommendations for enhancement of accident management procedures. Second, where considered necessary, new candidate accident management strategies are proposed for mitigation of the late-phase (after core damage has occurred) events. Finally, recommendations are made for consideration of additional strategies where warranted, and two of the four candidate strategies identified by this effort are assessed in detail: (1) preparation of a boron solution for reactor vessel refill should control blade damage occur during a period of temporary core dryout and (2) containment flooding to maintain the core debris within the reactor vessel if the injection systems cannot be restored

  1. Preliminary neutronic assessment for ATF (Accident Tolerant Fuel) based on iron alloy

    International Nuclear Information System (INIS)

    Abe, Alfredo; Carluccio, Thiago; Piovezan, Pamela; Giovedi, Claudia; Martins, Marcelo R.

    2015-01-01

    After Fukushima Daiichi nuclear accident in 2011, the nuclear fuel performance under accident condition became a very important issue and currently different research and development program are in progress toward to reliability and withstand under accident condition. These initiatives are known as ATF (Accident Tolerant Fuel) R and D program, which many countries with different research institutes, fuel vendors and others are nowadays involved. Accident Tolerant Fuel (ATF) can be defined as enhanced fuel which can tolerate loss of active cooling system capability for a considerably longer time period and the fuel/cladding system can be maintained without significant degradation and can also improve the fuel performance during normal operations and transients, as well as design-basis accident (DBA) and beyond design-basis (BDBA) accident. Different materials have being proposed as fuel cladding candidates considering thermo-mechanical properties and lower reaction kinetic with steam and slower hydrogen production. The aim of this work is to perform a neutronic assessment for several cladding candidates based on iron alloy considering a standard PWR fuel rod (fuel pellet and dimension). The purpose of the assessment is to address different parameters that might contribute for possible neutronic reactivity gain in order to overcome the penalty due to increase of neutron absorption in the cladding materials. All the neutronic assessment is performed using MCNP, Monte Carlo code. (author)

  2. Review of severe accidents and the results of accident consequence assessment in different energy systems (Contract research)

    International Nuclear Information System (INIS)

    Matsuki, Yoshio; Muramatsu, Ken

    2008-05-01

    The cases of severe accidents and the consequence assessments in different energy systems, Coal, Oil, Gas, Hydro and Nuclear, were collected, and then they were further analyzed. In this report, the information on the accidents in various energy systems were collected from the sources of the Paul Scherrer Institute (hereinafter, 'PSI') and the International Atomic Energy Agency (hereinafter, 'IAEA'). The information on the severe accidents of nuclear power plants were collected from the report of the US Presidential Commission on Catastrophic Nuclear Accidents and several relevant reports issued in the countries of the European Union, together with the reports of the PSI and the IAEA. To analyze the collected information, several parameters, which are numbers of fatalities, injuries, evacuees and the costs of the damages, were chosen to characterize those accidents in different energy systems. And then, upon the comparison of these characteristics of different accidents, the impacts of the accidents in nuclear and other energy systems were compared. Upon the results of the analysis, it is pointed out that the cost caused by the Chernobyl Accident, the severe accident in nuclear energy, tends to be higher than in the other energy systems. On the other hand, from the aspects of fatalities and injuries, it is not confirmed that the damages of the Chernobyl Accident are larger than in the other energy systems. However, it is also recognized, as the specific characteristics of the severe nuclear accident, that the impacts of the accident spread in a wider area, and stay for a longer period, in comparison with the ones in the other energy systems. (author)

  3. A simple assessment scheme for severe accident consequences using release parameters

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Kampanart, E-mail: kampanarts@tint.or.th [Thailand Institute of Nuclear Technology, 16 Vibhavadi-Rangsit Rd., Latyao, Chatuchak, 10900 (Thailand); Okamoto, Koji [The University of Tokyo, 7-3-1 Hongo, Bunkyo, Tokyo 113-8654 (Japan)

    2016-08-15

    Highlights: • Nuclear accident consequence index can assess overall consequences of an accident. • Correlations between the index and release parameters are developed. • Relation between the index and release amount follows power function. • The exponent of the power function is the key to the relation. - Abstract: Nuclear accident consequence index (NACI) which can assess the overall consequences of a severe accident on people and the environment is developed based on findings from previous studies. It consists of three indices: radiation effect index, relocation index and decontamination index. Though the NACI can cover large range of consequences, its assessment requires extensive resources. The authors then attempt to simplify the assessment, by investigating the relations between the release parameters and the NACI, in order to use the release parameters for severe accident consequence assessment instead of the NACI. NACI and its components increase significantly when the release amount is increased, while the influences of the release period and the release starting time on the NACI are nearly negligible. Relations between the release amount and the NACI and its components follow simple power functions (y = ax{sup b}). The exponent of the power functions seems to be the key to the relations. The exponent of the relation between the release amount and the NACI was around 0.8–1.0 when the release amount is smaller than 100 TBq, and it increased to around 1.3–1.4 when the release amount is equal to or larger than 100 TBq.

  4. Assessment of WWER fuel condition in design basis accident

    International Nuclear Information System (INIS)

    Bibilashvili, Yu.; Sokolov, N.; Andreeva-Andrievskaya, L.; Vlasov, Yu.; Nechaeva, O.; Salatov, A.

    1994-01-01

    The fuel behaviour in design basis accidents is assessed by means of the verified code RAPTA-5. The code uses a set of high temperature physico-chemical properties of the fuel components as determined for commercially produced materials, fuel rod simulators and fuel rod bundles. The WWER fuel criteria available in Russia for design basis accidents do not generally differ from the similar criteria adopted for PWR's. 12 figs., 11 refs

  5. 77 FR 66649 - Proposed Revision to Probabilistic Risk Assessment and Severe Accident Evaluation for New Reactors

    Science.gov (United States)

    2012-11-06

    ... and Severe Accident Evaluation for New Reactors AGENCY: Nuclear Regulatory Commission. ACTION... Assessment and Severe Accident Evaluation for New Reactors.'' The NRC is extending the public comment period... assessment (PRA) information and severe accident assessments for new reactors submitted to support design...

  6. Risk assessment of maintenance operations: the analysis of performing task and accident mechanism.

    Science.gov (United States)

    Carrillo-Castrillo, Jesús A; Rubio-Romero, Juan Carlos; Guadix, Jose; Onieva, Luis

    2015-01-01

    Maintenance operations cover a great number of occupations. Most small and medium-sized enterprises lack the appropriate information to conduct risk assessments of maintenance operations. The objective of this research is to provide a method based on the concepts of task and accident mechanisms for an initial risk assessment by taking into consideration the prevalence and severity of the maintenance accidents reported. Data were gathered from 11,190 reported accidents in maintenance operations in the manufacturing sector of Andalusia from 2003 to 2012. By using a semi-quantitative methodology, likelihood and severity were evaluated based on the actual distribution of accident mechanisms in each of the tasks. Accident mechanisms and tasks were identified by using those variables included in the European Statistics of Accidents at Work methodology. As main results, the estimated risk of the most frequent accident mechanisms identified for each of the analysed tasks is low and the only accident mechanisms with medium risk are accidents when lifting or pushing with physical stress on the musculoskeletal system in tasks involving carrying, and impacts against objects after slipping or stumbling for tasks involving movements. The prioritisation of public preventive actions for the accident mechanisms with a higher estimated risk is highly recommended.

  7. Assessment of WWER fuel condition in design basis accident

    Energy Technology Data Exchange (ETDEWEB)

    Bibilashvili, Yu; Sokolov, N; Andreeva-Andrievskaya, L; Vlasov, Yu; Nechaeva, O; Salatov, A [Vsesoyuznyj Nauchno-Issledovatel` skij Inst. Neorganicheskikh Materialov, Moscow (Russian Federation)

    1994-12-31

    The fuel behaviour in design basis accidents is assessed by means of the verified code RAPTA-5. The code uses a set of high temperature physico-chemical properties of the fuel components as determined for commercially produced materials, fuel rod simulators and fuel rod bundles. The WWER fuel criteria available in Russia for design basis accidents do not generally differ from the similar criteria adopted for PWR`s. 12 figs., 11 refs.

  8. A systematic process for developing and assessing accident management plans

    International Nuclear Information System (INIS)

    Hanson, D.J.; Blackman, H.S.; Meyer, O.R.; Ward, L.W.

    1991-04-01

    This document describes a four-phase approach for developing criteria recommended for use in assessing the adequacy of nuclear power plant accident management plans. Two phases of the approach have been completed and provide a prototype process that could be used to develop an accident management plan. Based on this process, a preliminary set of assessment criteria are derived. These preliminary criteria will be refined and improved when the remaining steps of the approach are completed, that is, after the prototype process is validated through application. 9 refs., 10 figs., 7 tabs

  9. Mortality from road traffic accidents in a rapidly urbanizing Chinese city: A 20-year analysis in Shenzhen, 1994-2013.

    Science.gov (United States)

    Xie, Shao-Hua; Wu, Yong-Sheng; Liu, Xiao-Jian; Fu, Ying-Bin; Li, Shan-Shan; Ma, Han-Wu; Zou, Fei; Cheng, Jin-Quan

    2016-01-01

    This study aimed to describe the trends of motorization and mortality rates from road traffic accidents and examine their associations in a rapidly urbanizing city in China, Shenzhen. Using data from the Shenzhen Deaths Registry between 1994 and 2013, we calculated the annual mortality rates of road traffic accidents, in addition to the age- and sex-specific mortality rates and their annual percentage changes (APCs) for the period of 2000-2013. We also examined the associations between mortality rate of road traffic accidents and traffic growth with Spearman's rank correlation analysis and a log-linear model derived from Smeed's law. A total of 20,196 deaths due to road traffic accidents, including 14,391 (71.3%) male deaths and 5,805 (28.7%) female deaths, were recorded in Shenzhen from 1994 to 2013. The annual mortality rates in terms of deaths per population and deaths per vehicle changed in similar patterns, demonstrating an increase since 1994 and peaking in 1997, followed by a steady decrease thereafter. The decrease in mortality was faster in individuals aged 20 year or older compared to those younger than 20 years. The mortality rates in term of deaths per population were positively correlated with the total number of vehicles per kilometer of road but negatively correlated with the motorization rate in term of vehicles per population. The estimated model for deaths due to road traffic accidents in relation to the total population and the number of registered vehicles was ln (deaths/10,000 vehicles) = -1.902 × ln (vehicles/population) - 1.961. The coefficient was statistically significant (P traffic accidents in a rapidly urbanizing Chinese city based observations in the 20-year period from 1994 to 2013. The decreased mortality rate may be explained by the expansion of road network construction, improved road safety regulations and management, as well as more accessible ambulance services in recent years. Nevertheless, road traffic accidents remain a

  10. Severe accident risks: An assessment for five US nuclear power plants

    International Nuclear Information System (INIS)

    1991-01-01

    This report summarizes an assessment of the risks from severe accidents in five commercial nuclear power plants in the United State. These risks are measured in a number of ways, including: the estimated frequencies of core damage accidents from internally initiated accidents and externally initiated accidents for two of the plants; the performance of containment structures under severe accident loadings; the potential magnitude of radionuclide releases and offsite consequences of such accidents; and the overall risk (the product of accident frequencies and consequences). Supporting this summary report are a large number of reports written under contract to NRC that provide the detailed discussion of the methods used and results obtained in these risk studies. This report, Volume 3, contains two appendices. Appendix D summarizes comments received, and staff responses, on the first (February 1987) draft of NUREG-1150. Appendix E provides a similar summary of comments and responses, but for the second (June 1989) version of the report

  11. Evaluation of nuclear accidents consequences. Risk assessment methodologies, current status and applications

    International Nuclear Information System (INIS)

    Rodriguez, J.M.

    1996-01-01

    General description of the structure and process of the probabilistic methods of assessment the external consequences in the event of nuclear accidents is presented. attention is paid in the interface with Probabilistic Safety Analysis level 3 results (source term evaluation) Also are described key issues in accident consequence evaluation as: effects evaluated (early and late health effects and economic effects due to countermeasures), presentation of accident consequences results, computer codes. Briefly are presented some relevant areas for the applications of Accident Consequence Evaluation

  12. Researches and Applications of ESR Dosimetry for Radiation Accident Dose Assessment

    International Nuclear Information System (INIS)

    Wu, K.; Guo, L.; Cong, J.B.; Sun, C.P.; Hu, J.M.; Zhou, Z.S.; Wang, S.; Zhang, Y.; Zhang, X.; Shi, Y.M.

    1998-01-01

    The aim of this work was to establish methods suitable for practical dose assessment of people involved in ionising radiation accidents. Some biological materials of the human body and materials possibly carried or worn by people were taken as detection samples. By using electron spin resonance (ESR) techniques, the basic dosimetric properties of selected materials were investigated in the range above the threshold dose of human acute haemopoietic radiation syndrome. The dosimetric properties involved included dose response properties of ESR signals, signal stabilities, distribution of background signals, the lowest detectable dose value, radiation conditions, environmental effects on the detecting process, etc. Several practical dose analytical indexes and detecting methods were set up. Some of them (bone, watch glass and tooth enamel) had also been successfully used in the dose assessment of people involved in three radiation accidents, including the Chernobyl reactor accident. This work further proves the important role of ESR techniques in radiation accident dose estimation. (author)

  13. Problems of probabilistic safety assessment after Fukushima Daiichi nuclear power plant accident

    International Nuclear Information System (INIS)

    Sugiyama, Naoki

    2011-01-01

    Probabilistic safety assessment (PSA) methodology to assure nuclear safety is had great expectations of lessons learned from Fukushima Daiichi nuclear power plant (NPP) accident and on the other hand this accident made actualized technical problems of PSA. Effectiveness of current PSA methodology for risk assessment was confirmed by comparing the accident development with accident scenario of PSA and equipment failure rate. From a viewpoint of nuclear safety objective and defense in depth approach of IAEA, technical problems of PSA were (1) extension of PSA for spent fuel pool and waste disposal system as well as level 3PSA for broader environmental contamination and (2) overlapping of accident scenario of plural unit site, balance of high quality plant management and preceding negation, treatment of uncertainty of external events, severe accident measure and human reliability analysis and reflection of disaster prevention capability to level 3PSA. In order to upgrade PSA technology, six proposals were described for nuclear safety and defense in depth, comprehensive evaluation scope and catch-up of latest technology, necessity of strategic preparation of PSA standard, human resources fostering and risk communication. (T. Tanaka)

  14. Comparative risk assessment of severe accidents in the energy sector

    International Nuclear Information System (INIS)

    Burgherr, Peter; Hirschberg, Stefan

    2014-01-01

    Comparative assessment of accident risks in the energy sector is a key aspect in a comprehensive evaluation of sustainability and energy security concerns. Safety performance of energy systems can have important implications on the environmental, economic and social dimensions of sustainability as well as availability, acceptability and accessibility aspects of energy security. Therefore, this study provides a broad comparison of energy technologies based on the objective expression of accident risks for complete energy chains. For fossil chains and hydropower the extensive historical experience available in PSI's Energy-related Severe Accident Database (ENSAD) is used, whereas for nuclear a simplified probabilistic safety assessment (PSA) is applied, and evaluations of new renewables are based on a combination of available data, modeling, and expert judgment. Generally, OECD and EU 27 countries perform better than non-OECD. Fatality rates are lowest for Western hydropower and nuclear as well as for new renewables. In contrast, maximum consequences can be by far highest for nuclear and hydro, intermediate for fossil, and very small for new renewables, which are less prone to severe accidents. Centralized, low-carbon technology options could generally contribute to achieve large reductions in CO 2 -emissions; however, the principal challenge for both fossil with Carbon Capture and Storage and nuclear is public acceptance. Although, external costs of severe accidents are significantly smaller than those caused by air pollution, accidents can have disastrous and long-term impacts. Overall, no technology performs best or worst in all respects, thus tradeoffs and priorities are needed to balance the conflicting objectives such as energy security, sustainability and risk aversion to support rationale decision making. - Highlights: • Accident risks are compared across a broad range of energy technologies. • Analysis of historical experience was based on the

  15. Golfech plant - Report on the complementary safety assessment of nuclear facilities in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Golfech plant to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the plant to withstand events beyond the level for which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence. Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like EDF's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. The creation of a nuclear rapid action force (FARN) is proposed: this will be a national emergency force made up of specialized teams equipped to intervene in less than 24 hours on a nuclear site hit by an accident. This report is divided into 8 main chapters: 1) features of the site, 2) earthquake risk, 3) flooding risk, 4) risks due to other extreme natural disasters, 5) the loss of electrical power supplies and of heat sink, 6) management of severe accidents (accidents with core melt), 7) task subcontracting policy, 8) synthesis and list of improvements. 4 following appendices review: EDF's crisis organization, the FARN, radiation protection organization and accidental event trees. (A.C.)

  16. Tricastin plant - Report on the complementary safety assessment of nuclear facilities in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Tricastin plant to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the plant to withstand events beyond the level for which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence. Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like EDF's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. The creation of a nuclear rapid action force (FARN) is proposed: this will be a national emergency force made up of specialized teams equipped to intervene in less than 24 hours on a nuclear site hit by an accident. This report is divided into 8 main chapters: 1) features of the site, 2) earthquake risk, 3) flooding risk, 4) risks due to other extreme natural disasters, 5) the loss of electrical power supplies and of heat sink, 6) management of severe accidents (accidents with core melt), 7) task subcontracting policy, 8) synthesis and list of improvements. 4 following appendices review: EDF's crisis organization, the FARN, radiation protection organization and accidental event trees. (A.C.)

  17. Bugey plant - Report on the complementary safety assessment of nuclear facilities in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Bugey plant to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the plant to withstand events beyond the level for which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence. Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like EDF's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. The creation of a nuclear rapid action force (FARN) is proposed: this will be a national emergency force made up of specialized teams equipped to intervene in less than 24 hours on a nuclear site hit by an accident. This report is divided into 8 main chapters: 1) features of the site, 2) earthquake risk, 3) flooding risk, 4) risks due to other extreme natural disasters, 5) the loss of electrical power supplies and of heat sink, 6) management of severe accidents (accidents with core melt), 7) task subcontracting policy, 8) synthesis and list of improvements. 4 following appendices review: EDF's crisis organization, the FARN, radiation protection organization and accidental event trees. (A.C.)

  18. Fessenheim plant - Report on the complementary safety assessment of nuclear facilities in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Fessenheim plant to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the plant to withstand events beyond the level for which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence. Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like EDF's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. The creation of a nuclear rapid action force (FARN) is proposed: this will be a national emergency force made up of specialized teams equipped to intervene in less than 24 hours on a nuclear site hit by an accident. This report is divided into 8 main chapters: 1) features of the site, 2) earthquake risk, 3) flooding risk, 4) risks due to other extreme natural disasters, 5) the loss of electrical power supplies and of heat sink, 6) management of severe accidents (accidents with core melt), 7) task subcontracting policy, 8) synthesis and list of improvements. 4 following appendices review: EDF's crisis organization, the FARN, radiation protection organization and accidental event trees. (A.C.)

  19. Chinon plant - Report on the complementary safety assessment of nuclear facilities in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Chinon B plant to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the plant to withstand events beyond the level for which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence. Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like EDF's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. The creation of a nuclear rapid action force (FARN) is proposed: this will be a national emergency force made up of specialized teams equipped to intervene in less than 24 hours on a nuclear site hit by an accident. This report is divided into 8 main chapters: 1) features of the site, 2) earthquake risk, 3) flooding risk, 4) risks due to other extreme natural disasters, 5) the loss of electrical power supplies and of heat sink, 6) management of severe accidents (accidents with core melt), 7) task subcontracting policy, 8) synthesis and list of improvements. 4 following appendices review: EDF's crisis organization, the FARN, radiation protection organization and accidental event trees. (A.C.)

  20. Blayais plant - Report on the complementary safety assessment of nuclear facilities in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Blayais plant to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the plant to withstand events beyond the level for which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence. Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like EDF's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. The creation of a nuclear rapid action force (FARN) is proposed: this will be a national emergency force made up of specialized teams equipped to intervene in less than 24 hours on a nuclear site hit by an accident. This report is divided into 8 main chapters: 1) features of the site, 2) earthquake risk, 3) flooding risk, 4) risks due to other extreme natural disasters, 5) the loss of electrical power supplies and of heat sink, 6) management of severe accidents (accidents with core melt), 7) task subcontracting policy, 8) synthesis and list of improvements. 4 following appendices review: EDF's crisis organization, the FARN, radiation protection organization and accidental event trees. (A.C.)

  1. Civaux plant - Report on the complementary safety assessment of nuclear facilities in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Civaux plant to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the plant to withstand events beyond the level for which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence. Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like EDF's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. The creation of a nuclear rapid action force (FARN) is proposed: this will be a national emergency force made up of specialized teams equipped to intervene in less than 24 hours on a nuclear site hit by an accident. This report is divided into 8 main chapters: 1) features of the site, 2) earthquake risk, 3) flooding risk, 4) risks due to other extreme natural disasters, 5) the loss of electrical power supplies and of heat sink, 6) management of severe accidents (accidents with core melt), 7) task subcontracting policy, 8) synthesis and list of improvements. 4 following appendices review: EDF's crisis organization, the FARN, radiation protection organization and accidental event trees. (A.C.)

  2. Cattenom plant - Report on the complementary safety assessment of nuclear facilities in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Cattenom plant to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the plant to withstand events beyond the level for which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence. Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like EDF's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. The creation of a nuclear rapid action force (FARN) is proposed: this will be a national emergency force made up of specialized teams equipped to intervene in less than 24 hours on a nuclear site hit by an accident. This report is divided into 8 main chapters: 1) features of the site, 2) earthquake risk, 3) flooding risk, 4) risks due to other extreme natural disasters, 5) the loss of electrical power supplies and of heat sink, 6) management of severe accidents (accidents with core melt), 7) task subcontracting policy, 8) synthesis and list of improvements. 4 following appendices review: EDF's crisis organization, the FARN, radiation protection organization and accidental event trees. (A.C.)

  3. Gravelines plant - Report on the complementary safety assessment of nuclear facilities in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Gravelines plant to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the plant to withstand events beyond the level for which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence. Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like EDF's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. The creation of a nuclear rapid action force (FARN) is proposed: this will be a national emergency force made up of specialized teams equipped to intervene in less than 24 hours on a nuclear site hit by an accident. This report is divided into 8 main chapters: 1) features of the site, 2) earthquake risk, 3) flooding risk, 4) risks due to other extreme natural disasters, 5) the loss of electrical power supplies and of heat sink, 6) management of severe accidents (accidents with core melt), 7) task subcontracting policy, 8) synthesis and list of improvements. 4 following appendices review: EDF's crisis organization, the FARN, radiation protection organization and accidental event trees. (A.C.)

  4. Data base of accident and agricultural statistics for transportation risk assessment

    Energy Technology Data Exchange (ETDEWEB)

    Saricks, C.L.; Williams, R.G.; Hopf, M.R.

    1989-11-01

    A state-level data base of accident and agricultural statistics has been developed to support risk assessment for transportation of spent nuclear fuels and high-level radioactive wastes. This data base will enhance the modeling capabilities for more route-specific analyses of potential risks associated with transportation of these wastes to a disposal site. The data base and methodology used to develop state-specific accident and agricultural data bases are described, and summaries of accident and agricultural statistics are provided. 27 refs., 9 tabs.

  5. Data base of accident and agricultural statistics for transportation risk assessment

    International Nuclear Information System (INIS)

    Saricks, C.L.; Williams, R.G.; Hopf, M.R.

    1989-11-01

    A state-level data base of accident and agricultural statistics has been developed to support risk assessment for transportation of spent nuclear fuels and high-level radioactive wastes. This data base will enhance the modeling capabilities for more route-specific analyses of potential risks associated with transportation of these wastes to a disposal site. The data base and methodology used to develop state-specific accident and agricultural data bases are described, and summaries of accident and agricultural statistics are provided. 27 refs., 9 tabs

  6. Assessment of two BWR accident management strategies

    International Nuclear Information System (INIS)

    Hodge, S.A.; Petek, M.

    1991-01-01

    Candidate mitigative strategies for management of in-vessel events during the late phase (after core degradation has occurred) of postulated BWR severe accidents were considered at Oak Ridge National Laboratory (ORNL) during 1990. The identification of new strategies was subject to the constraint that they should, to the maximum extent possible, make use of the existing equipment and water resources of the BWR facilities and not require major equipment modifications or additions. As a result of this effort, two of these candidate strategies were recommended for additional assessment. The first is a strategy for containment flooding to maintain the core and structural debris within the reactor vessel in the event that vessel injection cannot be restored to terminate a severe accident sequence. The second strategy pertains to the opposite case, for which vessel injection would be restored after control blade melting had begun; its purpose is to provide an injection source of borated water at the concentration necessary to preclude criticality upon recovering a damaged BWR core. Assessments of these two strategies have been performed during 1991 under the auspices of the Detailed Assessment of BWR In-Vessel Strategies Program. This paper provides a discussion of the motivation for and purpose of these strategies and the potential for their success. 33 refs., 9 figs

  7. An application of probabilistic safety assessment methods to model aircraft systems and accidents

    Energy Technology Data Exchange (ETDEWEB)

    Martinez-Guridi, G.; Hall, R.E.; Fullwood, R.R.

    1998-08-01

    A case study modeling the thrust reverser system (TRS) in the context of the fatal accident of a Boeing 767 is presented to illustrate the application of Probabilistic Safety Assessment methods. A simplified risk model consisting of an event tree with supporting fault trees was developed to represent the progression of the accident, taking into account the interaction between the TRS and the operating crew during the accident, and the findings of the accident investigation. A feasible sequence of events leading to the fatal accident was identified. Several insights about the TRS and the accident were obtained by applying PSA methods. Changes proposed for the TRS also are discussed.

  8. Users guide for NRC145-2 accident assessment computer code

    International Nuclear Information System (INIS)

    Pendergast, M.M.

    1982-08-01

    An accident assessment computer code has been developed for use at the Savannah River Plant. This computer code is based upon NRC Regulatory Guide 1.145 which provides guidence for accident assessements for power reactors. The code contains many options so that the user may utilize the code for many different assessments. For example the code can be used for non-nuclear assessments such as Sulpher Dioxide which may be required by the EPA. A discription of the code is contained in DP-1646. This document is a compilation of step-by-step instructions on how to use the code on the SRP IBM 3308 computer. This document consists of a number of tables which contain copies of computer listings. Some of the computer listings are copies of input; other listings give examples of computer output

  9. Generic assessment procedures for determining protective actions during a reactor accident

    International Nuclear Information System (INIS)

    1997-08-01

    This manual provides the tools, procedures and data needed to evaluate the consequences of a nuclear accident occurring at a nuclear power plant throughout all phases of the emergency before, during and after a release of radioactive material. It is intended for use by on-site and off-site groups responsible for evaluating the accident consequences and making recommendations for the protection of the plant personnel, the emergency workers and the public. The scope of this manual is restricted to the technical assessment of radiological consequences. It does not address the emergency response infrastructure requirements, nor does it cover the emergency management aspects of accident assessment (e.g. reporting, staff qualification, shift replacement, and procedure implementation). The procedures and methods in this manual were developed based on a number of assumptions concerning the design and operation of the nuclear power plant and national practices. Therefore, this manual must be reviewed as part of the planning process to match the potential accidents, local conditions, national criteria and other unique characteristics of an area or nuclear reactor where it may be used. Refs, figs, tabs

  10. Assessment of the accident response of a light-water-moderated breeder-reactor system: AWBA development program

    International Nuclear Information System (INIS)

    High, H.M.

    1983-05-01

    The predicted accident response for a light water moderated, thorium/U-233 fueled, seed-blanket reactor concept was assessed. The first part of the assessment compared breeder accident response with that of a current commercial pressurized water reactor design for several different types of transients. Based on these comparisons and a review of the various parameter differences between the breeder and a U-235 fueled plant, the second part of the assessment studied the breeder accident behavior in more detail, particularly in areas of potential concern. Based on the two parts of the assessment, it was concluded that the breeder accident response would be very similar to that of present commercial pressurized water reactor plants. The large Doppler and moderator reactivity coefficients of the breeder would significantly reduce the severity of many of the accidents that must be considered. It is expected that the accident response of the breeder can be shown to meet regulatory criteria

  11. Hazard Identification, Risk Assessment and Risk Control (HIRARC Accidents at Power Plant

    Directory of Open Access Journals (Sweden)

    Ahmad Asmalia Che

    2016-01-01

    Full Text Available Power plant had a reputation of being one of the most hazardous workplace environments. Workers in the power plant face many safety risks due to the nature of the job. Although power plants are safer nowadays since the industry has urged the employer to improve their employees’ safety, the employees still stumble upon many hazards thus accidents at workplace. The aim of the present study is to investigate work related accidents at power plants based on HIRARC (Hazard Identification, Risk Assessment and Risk Control process. The data were collected at two coal-fired power plant located in Malaysia. The finding of the study identified hazards and assess risk relate to accidents occurred at the power plants. The finding of the study suggested the possible control measures and corrective actions to reduce or eliminate the risk that can be used by power plant in preventing accidents from occurred

  12. MELCOR assessment of sequential severe accident mitigation actions under SGTR accident

    International Nuclear Information System (INIS)

    Choi, Wonjun; Jeon, Joongoo; Kim, Nam Kyung; Kim, Sung Joong

    2017-01-01

    The representative example of the severe accident studies using the severe accident code is investigation of effectiveness of developed severe accident management (SAM) strategy considering the positive and adverse effects. In Korea, some numerical studies were performed to investigate the SAM strategy using various severe accident codes. Seo et.al performed validation of RCS depressurization strategy and investigated the effect of severe accident management guidance (SAMG) entry condition under small break loss of coolant accident (SBLOCA) without safety injection (SI), station blackout (SBO), and total loss of feed water (TLOFW) scenarios. The SGTR accident with the sequential mitigation actions according to the flow chart of SAMG was simulated by the MELCOR 1.8.6 code. Three scenariospreventing the RPV failure were investigated in terms of fission product release, hydrogen risk, and the containment pressure. Major conclusions can be summarized as follows: (1) According to the flow chart of SAMG, RPV failure can be prevented depending on the method of RCS depressurization. (2) To reduce the release of fission product during the injecting into SGs, a temporary opening of SDS before the injecting into SGs was suggested. These modified sequences of mitigation actions can reduce the release of fission product and the adverse effect of SDS.

  13. Development on Dose Assessment Model of Northeast Asia Nuclear Accident Simulator

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ju Yub; Kim, Ju Youl; Kim, Suk Hoon; Lee, Seung Hee; Yoon, Tae Bin [FNC Techology, Yongin (Korea, Republic of)

    2016-05-15

    In order to support the emergency response system, the simulator for overseas nuclear accident is under development including source-term estimation, atmospheric dispersion modeling and dose assessment. The simulator is named NANAS (Northeast Asia Nuclear Accident Simulator). For the source-term estimation, design characteristics of each reactor type should be reflected into the model. Since there are a lot of reactor types in neighboring countries, the representative reactors of China, Japan and Taiwan have been selected and the source-term estimation models for each reactor have been developed, respectively. For the atmospheric dispersion modeling, Lagrangian particle model will be integrated into the simulator for the long range dispersion modeling in Northeast Asia region. In this study, the dose assessment model has been developed considering external and internal exposure. The dose assessment model has been developed as a part of the overseas nuclear accidents simulator which is named NANAS. It addresses external and internal pathways including cloudshine, groundshine and inhalation. Also, it uses the output of atmospheric dispersion model (i.e. the average concentrations of radionuclides in air and ground) and various coefficients (e.g. dose conversion factor and breathing rate) as an input. Effective dose and thyroid dose for each grid in the Korean Peninsula region are printed out as a format of map projection and chart. Verification and validation on the dose assessment model will be conducted in further study by benchmarking with the measured data of Fukushima Daiichi Nuclear Accident.

  14. [Diving accidents. Emergency treatment of serious diving accidents].

    Science.gov (United States)

    Schröder, S; Lier, H; Wiese, S

    2004-11-01

    Decompression injuries are potentially life-threatening incidents mainly due to a rapid decline in ambient pressure. Decompression illness (DCI) results from the presence of gas bubbles in the blood and tissue. DCI may be classified as decompression sickness (DCS) generated from the liberation of gas bubbles following an oversaturation of tissues with inert gas and arterial gas embolism (AGE) mainly due to pulmonary barotrauma. People working under hyperbaric pressure, e.g. in a caisson for general construction under water, and scuba divers are exposed to certain risks. Diving accidents can be fatal and are often characterized by organ dysfunction, especially neurological deficits. They have become comparatively rare among professional divers and workers. However, since recreational scuba diving is gaining more and more popularity there is an increasing likelihood of severe diving accidents. Thus, emergency staff working close to areas with a high scuba diving activity, e.g. lakes or rivers, may be called more frequently to a scuba diving accident. The correct and professional emergency treatment on site, especially the immediate and continuous administration of normobaric oxygen, is decisive for the outcome of the accident victim. The definitive treatment includes rapid recompression with hyperbaric oxygen. The value of adjunctive medication, however, remains controversial.

  15. HIV surveillance in needlestick accidents with health workers

    Directory of Open Access Journals (Sweden)

    Janete Lane Amadei

    2010-12-01

    Full Text Available Objective: To characterize the occurrence of needlestick accidents with health professionals submitted to rapid HIV tests. Methods: A descriptive, epidemiological study, carried out by notification of the occurrence of needlestick accidents in the Epidemiology Sector of the State Health Secretariat, in 2008. The following variables were assessed: gender, age, exposed biological material, type of exposure, source patient, and injured patient, progression of the case, accident situation, and use of personal protective equipment (PPE, 180 days serology and occupational area. Results: There have been reports of 143 accidents, prevailing in nursing, female, 20 to 30 years, involving the blood and biological material by percutaneous puncture. We found no standardization in the use of PPE. The HIV test revealed no positive cases. Conclusion: This study helped to characterize the occurrence of accidents reported in health care professionals and evaluate the protocol of care given. It also revealed non-contamination by HIV.

  16. Assessment of ICARE/CATHARE V1 Severe Accident Code

    International Nuclear Information System (INIS)

    Chatelard, Patrick; Fleurot, Joelle; Marchand, Olivier; Drai, Patrick

    2006-01-01

    The ICARE/CATHARE code system has been developed by the French 'Institut de Radioprotection et de Surete Nucleaire' (IRSN) in the last decade for the detailed evaluation of Severe Accident (SA) consequences in a primary system. It is composed of the coupling of the core degradation IRSN code ICARE2 and of the thermal-hydraulics French code CATHARE2. It has been extensively used to support the level 2 Probabilistic Safety Assessment (PSA-2) of the 900 MWe PWR. This paper presents the synthesis of the ICARE/CATHARE V1 assessment which was conducted in the frame of the 'International ICARE/CATHARE Users' Club', under the management of IRSN. The ICARE/CATHARE V1 validation matrix is composed of more than 60 experiments, distributed in few thermal-hydraulics non-regression tests (to handle the front end phase of a severe accident), numerous Separate-Effect Tests, about 30 Integral Tests covering both the early and the late degradation phases, as well as a 'circuit' experiment including hydraulics loops. Finally, the simulation of the TMI-2 accident was also added to assess the code against real conditions. This validation task was aimed at assessing the ICARE/CATHARE V1 capabilities (including the stand-alone ICARE2 V3mod1 version) and also at proposing recommendations for an optimal use of this version ('Users' Guidelines'). Thus, with a correct account for the recommended guidelines, it appeared that the last ICARE/CATHARE V1 version could be reasonably used to perform best-estimate reactor studies up to a large corium slumping into the lower head. (authors)

  17. Saint-Alban plant - Report on the complementary safety assessment of nuclear facilities in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Saint-Alban plant to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the plant to withstand events beyond the level for which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence. Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like EDF's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. The creation of a nuclear rapid action force (FARN) is proposed: this will be a national emergency force made up of specialized teams equipped to intervene in less than 24 hours on a nuclear site hit by an accident. This report is divided into 8 main chapters: 1) features of the site, 2) earthquake risk, 3) flooding risk, 4) risks due to other extreme natural disasters, 5) the loss of electrical power supplies and of heat sink, 6) management of severe accidents (accidents with core melt), 7) task subcontracting policy, 8) synthesis and list of improvements. 4 following appendices review: EDF's crisis organization, the FARN, radiation protection organization and accidental event trees. (A.C.)

  18. Normal accidents

    International Nuclear Information System (INIS)

    Perrow, C.

    1989-01-01

    The author has chosen numerous concrete examples to illustrate the hazardousness inherent in high-risk technologies. Starting with the TMI reactor accident in 1979, he shows that it is not only the nuclear energy sector that bears the risk of 'normal accidents', but also quite a number of other technologies and industrial sectors, or research fields. The author refers to the petrochemical industry, shipping, air traffic, large dams, mining activities, and genetic engineering, showing that due to the complexity of the systems and their manifold, rapidly interacting processes, accidents happen that cannot be thoroughly calculated, and hence are unavoidable. (orig./HP) [de

  19. Environmental Impact Assessment following a Nuclear Accident to a Candu NPP

    International Nuclear Information System (INIS)

    Margeanu, C.A.; Margeanu, S.; Olteanu, Gh.

    2009-01-01

    The paper presents calculations of nuclear accident consequences to public and environment, for a Candu NPP using advanced fuel in two hypothetical accident scenarios: (1) large LOCA followed by partial core melting with early containment failure; (2) late core disassembly and containment bypass through ECCS. During both accidents a release occurs, radioactive contaminants being dispersed into atmosphere. As reference, estimations for Candu standard UO 2 fuel were used. The radioactive core inventory was obtained by using ORIGEN-S computer code included in ORNL,SCALE 5 programs package. Radiological consequences assessment to public and environment was performed by means of PC COSYMA computer code

  20. Development of A Methodology for Assessing Various Accident Management Strategies Using Decision Tree Models

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Nam Yeong; Kim, Jin Tae; Jae, Moo Sung [Hanyang University, Seoul (Korea, Republic of); Jerng, Dong Wook [Chung-Ang University, Seoul (Korea, Republic of)

    2016-05-15

    The purpose of ASP (Accident Sequence Precursor) analysis is to evaluate operational accidents in full power and low power operation by using PRA (Probabilistic Risk Assessment) technologies. The awareness of the importance of ASP analysis has been on rise. The methodology for ASP analysis has been developed in Korea, KINS (Korea Institute of Nuclear Safety) has managed KINS-ASP program since it was developed. In this study, we applied ASP analysis into operational accidents in full power and low power operation to quantify CCDP (Conditional Core Damage Probability). To reflect these 2 cases into PRA model, we modified fault trees and event trees of the existing PRA model. Also, we suggest the ASP regulatory system in the conclusion. In this study, we reviewed previous studies for ASP analysis. Based on it, we applied it into operational accidents in full power and low power operation. CCDP of these 2 cases are 1.195E-06 and 2.261E-03. Unlike other countries, there is no regulatory basis of ASP analysis in Korea. ASP analysis could detect the risk by assessing the existing operational accidents. ASP analysis can improve the safety of nuclear power plant by detecting, reviewing the operational accidents, and finally removing potential risk. Operator have to notify regulatory institute of operational accident before operator takes recovery work for the accident. After follow-up accident, they have to check precursors in data base to find similar accident.

  1. Cost-effectiveness analysis of countermeasures using accident consequence assessment models

    International Nuclear Information System (INIS)

    Alonso, A.; Gallego, E.

    1987-01-01

    In the event of a large release of radionuclides from a nuclear power plant, protective actions for the population potentially affected must be implemented. Cost-effectiveness analysis will be useful to define the countermeasures and the criteria needed to implement them. This paper shows the application of Accident Consequence Assessment (ACA) models to cost-effectiveness analysis of emergency and long-term countermeasures, making use of the different relationships between dose, contamination levels, affected areas and population distribution, included in such a model. The procedure is illustrated with the new Melcor Accident Consequence Code System (MACCS 1.3), developed at Sandia National Laboratories (USA), for a fixed accident scenario. Different alternative actions are evaluated with regard to their radiological and economical impact, searching for an 'optimum' strategy. (author)

  2. Techniques and decision making in the assessment of off-site consequences of an accident in a nuclear facility

    International Nuclear Information System (INIS)

    1987-01-01

    This Guide is intended to complement the IAEA's existing technical guidance on emergency planning and preparedness by providing information and practical guidance related to the assessment of off-site consequences of an accident in a nuclear or radioactive materials installation and to the decision making process in implementing protective measures. This Guide contains information on emergency response philosophy, fundamental factors affecting accident consequences, principles of accident assessment, data acquisition and handling, systems, techniques and decision making principles. Many of the accident assessment concepts presented are considerably more advanced than some of those that now pertain in most countries. They could, if properly interpreted, developed and applied, significantly improve emergency response in the early and intermediate phases of an accident. Furthermore, they are considered to be applicable to a broad range of serious nuclear accidents and radiological emergencies. The extent of their application is governed by both the scale of the accident and by the availability of preplanned resources for accident assessment and emergency response. 68 refs, 28 figs, 14 tabs

  3. SCPRI Emergency Kit for Use in the Event of a Nuclear Accident; Le Dispositif d'Intervention Rapide du SCPRI en Cas d'Accident Nucleaire

    Energy Technology Data Exchange (ETDEWEB)

    Ervet, P.; Moroni, J. P.; Pellerin, P. [Service Central de Protection Contre les Rayonnements Ionisants, Ministere des Affaires Sociales, Le Vesinet (France)

    1969-10-15

    In the event of a nuclear accident necessitating implementation of the ORSEC radiation protection plan, the Service central de protection contre les rayonnements ionisants (Central Service for Protection against Ionizing Radiations), in conjunction with the Service national de la protection civile (National Civil Defence Service), has adopted the necessary measures for rapid evaluation of possible contamination as promptly as possible. With this aim in mind the Service has prepared emergency kits, which are permanently stored at airfields in the Paris region; these can be carried by aircraft together with two engineers from the Service, thereby enabling them to reach the site of the incident with the specialized equipment in a few hours at most. This paper describes the monitoring and sampling equipment as well as the conditions under which the kit is carried and used (it operates independently by having a built-in generating unit). It is basically designed to permit an initial assessment of the situation, to furnish local authorities with data on which to base decisions for the safety of the population, and to determine any additional measures that need to be adopted. (author) [French] Dans le cas d'un accident nucleaire impliquant la mise en application du plan ORSEC radiologique, en liaison avec le Service national de la protection civile, le Service central de protection contre les rayonnements ionisants a pris les dispositions necessaires pour faire une evaluation rapide, aussi preooce que possible, des contaminations eventuelles. Dans ce but, il a realise des cantines d'intervention qui sont deposees en permanence sur les aerodromes de la region parisienne, et peuvent etre embarquees par avion avec deux ingenieurs du service qui peuvent etre ainsi sur les lieux de l'incident, avec un materiel specialise, dans un delai qui n'excede pas quelques heures. Le memoire decrit le materiel de mesure et de prelevement, ainsi que les conditions de transport et d

  4. Improvement of the following accident dose assessment system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Enn Han; Han, Moon Hee; Suh, Kyung Suk; Hwang, Won Tae; Choi, Young Gil [Korea Advanced Institute of Science and Technology, Taejon (Korea, Republic of)

    1999-12-15

    The FADAS has been updates for calculating the real-time wind fields continuously at the nuclear sites in Korea. The system has been constructed to compute the wind fields using its own process for the dummy meteorological data, and dose not effect on the overall wind field module. If the radioactive materials are released into the atmosphere in real situation, the calculations of wind fields and exposure dose in the previous FADAS are performed in the case of the recognition of the above situation in the source term evaluation module. The current version of FADAS includes the program for evaluating the effect of the predicted accident and the assumed scenario together. The dose assessment module is separated into the real-time and the supposed accident respectively.

  5. Chernobyl radiological data for accident consequence assessment

    International Nuclear Information System (INIS)

    Bottino, A.; Sacripanti, A.

    1989-01-01

    In this draft is presented the results of a first effort to summarize information related to the radionuclides behaviour in rural areas, in order to estimate pathway parameters to assess accident consequences. This topic encloses relevant aspects concerning contamination of rural environment, the most important being: 1) dry deposition velocities; 2) washout coefficient; 3) accumulation in lakes; 4) migration in soil; 5) winter conditions; 6) filtering effects of forests

  6. ANS severe accident program overview ampersand planning document

    International Nuclear Information System (INIS)

    Taleyarkhan, R.P.

    1995-09-01

    The Advanced Neutron Source (ANS) severe accident document was developed to provide a concise and coherent mechanism for presenting the ANS SAP goals, a strategy satisfying these goals, a succinct summary of the work done to date, and what needs to be done in the future to ensure timely licensability. Guidance was received from various bodies [viz., panel members of the ANS severe accident workshop and safety review committee, Department of Energy (DOE) orders, Nuclear Regulatory Commission (NRC) requirements for ALWRs and advanced reactors, ACRS comments, world-wide trends] were utilized to set up the ANS-relevant SAS goals and strategy. An in-containment worker protection goal was also set up to account for the routine experimenters and other workers within containment. The strategy for achieving the goals is centered upon closing the severe accident issues that have the potential for becoming certification issues when assessed against realistic bounding events. Realistic bounding events are defined as events with an occurrency frequency greater than 10 -6 /y. Currently, based upon the level-1 probabilistic risk assessment studies, the realistic bounding events for application for issue closure are flow blockage of fuel element coolant channels, and rapid depressurization-related accidents

  7. Dampierre-en-Burly plant - Report on the complementary safety assessment of nuclear facilities in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Dampierre-en-Burly plant to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the plant to withstand events beyond the level for which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence. Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like EDF's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. The creation of a nuclear rapid action force (FARN) is proposed: this will be a national emergency force made up of specialized teams equipped to intervene in less than 24 hours on a nuclear site hit by an accident. This report is divided into 8 main chapters: 1) features of the site, 2) earthquake risk, 3) flooding risk, 4) risks due to other extreme natural disasters, 5) the loss of electrical power supplies and of heat sink, 6) management of severe accidents (accidents with core melt), 7) task subcontracting policy, 8) synthesis and list of improvements. 4 following appendices review: EDF's crisis organization, the FARN, radiation protection organization and accidental event trees. (A.C.)

  8. Belleville-sur-Loire plant - Report on the complementary safety assessment of nuclear facilities in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Belleville-sur-Loire plant to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the plant to withstand events beyond the level for which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence. Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like EDF's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. The creation of a nuclear rapid action force (FARN) is proposed: this will be a national emergency force made up of specialized teams equipped to intervene in less than 24 hours on a nuclear site hit by an accident. This report is divided into 8 main chapters: 1) features of the site, 2) earthquake risk, 3) flooding risk, 4) risks due to other extreme natural disasters, 5) the loss of electrical power supplies and of heat sink, 6) management of severe accidents (accidents with core melt), 7) task subcontracting policy, 8) synthesis and list of improvements. 4 following appendices review: EDF's crisis organization, the FARN, radiation protection organization and accidental event trees. (A.C.)

  9. Nogent-sur-Seine plant - Report on the complementary safety assessment of nuclear facilities in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Nogent-sur-Seine plant to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the plant to withstand events beyond the level for which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence. Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like EDF's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. The creation of a nuclear rapid action force (FARN) is proposed: this will be a national emergency force made up of specialized teams equipped to intervene in less than 24 hours on a nuclear site hit by an accident. This report is divided into 8 main chapters: 1) features of the site, 2) earthquake risk, 3) flooding risk, 4) risks due to other extreme natural disasters, 5) the loss of electrical power supplies and of heat sink, 6) management of severe accidents (accidents with core melt), 7) task subcontracting policy, 8) synthesis and list of improvements. 4 following appendices review: EDF's crisis organization, the FARN, radiation protection organization and accidental event trees. (A.C.)

  10. Dose assessment around TR-2 reactor due to maximum credible accident

    International Nuclear Information System (INIS)

    Turgut, M. H.; Adalioglu, U.; Aytekin, A.

    2001-01-01

    The revision of safety analysis report of TR-2 research reactor had been initiated in 1995. The whole accident analysis and accepted scenario for maximum credible accident has been revised according to the new safety concepts and the impact to be given to the environment due to this scenario has been assessed. This paper comprises all results of these calculations. The accepted maximum credible accident scenario is the partial blockage of the whole reactor core which resulted in the release of 25% of the core inventory. The DOSER code which uses very conservative modelling of atmospheric distributions were modified for the assessment calculations. Pasquill conditions based on the local weather observations, topography, and building affects were considered. The thyroid and whole body doses for 16 sectors and up to 10 km of distance around CNAEM were obtained. Release models were puff and a prolonged one of two hours of duration. Release fractions for the active isotopes were chosen from literature which were realistic

  11. Assessment of off-site consequences of nuclear accidents (MARIA)

    International Nuclear Information System (INIS)

    Haywood, S.M.

    1985-01-01

    A brief report is given of a workshop held in Luxembourg in 1985 on methods for assessing the off-site radiological consequences of nuclear accidents (MARIA). The sessions included topics such as atmospheric dispersion; foodchain transfer; urban contamination; demographic and land use data; dosimetry, health effects, economic and countermeasures models; uncertainty analysis; and application of probabilistic risk assessment results as input to decision aids. (U.K.)

  12. ANS severe accident program overview & planning document

    Energy Technology Data Exchange (ETDEWEB)

    Taleyarkhan, R.P.

    1995-09-01

    The Advanced Neutron Source (ANS) severe accident document was developed to provide a concise and coherent mechanism for presenting the ANS SAP goals, a strategy satisfying these goals, a succinct summary of the work done to date, and what needs to be done in the future to ensure timely licensability. Guidance was received from various bodies [viz., panel members of the ANS severe accident workshop and safety review committee, Department of Energy (DOE) orders, Nuclear Regulatory Commission (NRC) requirements for ALWRs and advanced reactors, ACRS comments, world-wide trends] were utilized to set up the ANS-relevant SAS goals and strategy. An in-containment worker protection goal was also set up to account for the routine experimenters and other workers within containment. The strategy for achieving the goals is centered upon closing the severe accident issues that have the potential for becoming certification issues when assessed against realistic bounding events. Realistic bounding events are defined as events with an occurrency frequency greater than 10{sup {minus}6}/y. Currently, based upon the level-1 probabilistic risk assessment studies, the realistic bounding events for application for issue closure are flow blockage of fuel element coolant channels, and rapid depressurization-related accidents.

  13. A critical assessment of energy accident studies

    International Nuclear Information System (INIS)

    Felder, Frank A.

    2009-01-01

    A comparison of two studies conducted ten years apart on energy accidents provides important insights into methodological issues and policy implications. Recommendations for further improvements in energy accident studies are developed including accounting for differences between average and incremental accident damages, testing for appropriate levels of aggregation of accidents, making references and databases publicly available, more precisely defining and reporting different types of economic damages, accounting for involuntary and voluntary risks, reporting normalized damages, raising broader public policy and planning implications and updating existing accident databases.

  14. A critical assessment of energy accident studies

    Energy Technology Data Exchange (ETDEWEB)

    Felder, Frank A. [Edward J. Bloustein School of Planning and Public Policy, Rutgers, The State University of New Jersey, 33 Livingston Avenue, New Brunswick, NJ 08901 (United States)

    2009-12-15

    A comparison of two studies conducted ten years apart on energy accidents provides important insights into methodological issues and policy implications. Recommendations for further improvements in energy accident studies are developed including accounting for differences between average and incremental accident damages, testing for appropriate levels of aggregation of accidents, making references and databases publicly available, more precisely defining and reporting different types of economic damages, accounting for involuntary and voluntary risks, reporting normalized damages, raising broader public policy and planning implications and updating existing accident databases. (author)

  15. Development of a Methodology for VHTR Accident Consequence Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Joeun; Kim, Jintae; Jae, Moosung [Hanyang University, Seoul (Korea, Republic of)

    2016-05-15

    The substitution of the VHTR for burning fossil fuels conserves these hydrocarbon resources for other uses and eliminates the emissions of greenhouse. In Korea, for these reasons, constructing the VHTR plan for hydrogen production is in progress. In this study, the consequence analysis for the off-site releases of radioactive materials during severe accidents has been performed using the level 3 PRA technology. The offsite consequence analysis for a VHTR using the MACCS code has been performed. Since the passive system such as the RCCS(Reactor Cavity Cooling System) are equipped, the frequency of occurrence of accidents has been evaluated to be very low. For further study, the assessment for characteristic of VHTR safety system and precise quantification of its accident scenarios is expected to conduct more certain consequence analysis. This methodology shown in this study might contribute to enhancing the safety of VHTR design by utilizing the results having far lower effect on the environment than the LWRs.

  16. Accident consequence assessment and siting criteria development

    International Nuclear Information System (INIS)

    Kollas, J.G.

    1988-01-01

    The methodology developed is based on assessing the average over a large spectrum of meteorological conditions whole body collective dose resulting from a severe reference accident. The assessment of this dose is performed by code CRAC.GAEC, the Greek A.E.C. version of code CRAC2. The collective dose, which is chosen as a measure of the social radiation risk, is compared to the dose corresponding to a level of social risk encountered historically in energy production as a whole. The outcome of the comparison can be the determination of one or more sectors of acceptable sites for a set of specific conditions considered, such as the reactor characteristics. The present approach was aimed to deal with the problems stemming from the demographic idiomorphy of Greece, where one third of the country's population is concentrated in Athens, with the rest of the country exhibiting small population densities. One of the applications of the methodology developed concerned the identification of acceptable sites near Athens. For these sites the risk from the reference severe accident of a standard reactor to the over three millions inhabitants of Athens is less tan the risk corresponding to the same population that is due to energy production

  17. Assessment of two BWR accident management strategies

    International Nuclear Information System (INIS)

    Hodge, S.A.; Petek, M.

    1994-01-01

    Candidate mitigative strategies for the management of in-vessel events during the late phase (after-core degradation has occurred) of postulated boiling water reactor (BWR) severe accidents were considered at Oak Ridge National Laboratory (ORNL) during 1990. The identification of new strategies was subject to the constraint that they should, to the maximum extent possible, make use of the existing equipment and water resources of the BWR facilities, and not require major equipment modifications or additions. As a result of this effort, two of these candidate strategies were recommended for further assessment. The first was a strategy for containment flooding to maintain the core and structural debris within the reactor vessel in the event that vessel injection cannot be restored to terminate a severe accident sequence. The second strategy pertained to the opposite case, for which vessel injection would be restored after control blade melting had begun; its purpose was to provide an injection source of borated water at the concentration necessary to preclude criticality upon recovering a damaged BWR core. Assessments of these two strategies were performed during 1991 and this paper provides a discussion of the motivation for and purpose of these strategies, and the potential for their success. ((orig.))

  18. Flamanville plant - Report on the complementary safety assessment of nuclear facilities in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Flamanville plant to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the plant to withstand events beyond the level for which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence. Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like EDF's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. The creation of a nuclear rapid action force (FARN) is proposed: this will be a national emergency force made up of specialized teams equipped to intervene in less than 24 hours on a nuclear site hit by an accident. This report is divided into 2 parts: one part dedicated to the first 2 reactors of the plant and the second part to the EPR that is being built. Each part is divided into 8 main chapters: 1) features of the site, 2) earthquake risk, 3) flooding risk, 4) risks due to other extreme natural disasters, 5) the loss of electrical power supplies and of heat sink, 6) management of severe accidents (accidents with core melt), 7) task subcontracting policy, 8) synthesis and list of improvements. 4 following appendices review: EDF's crisis organization, the FARN, radiation protection organization and accidental event trees. (A.C.)

  19. Risk assessment for long-term post-accident sequences

    International Nuclear Information System (INIS)

    Ellia-Hervy, A.; Ducamp, F.

    1987-11-01

    Probabilistic risk analysis, currently conducted by the CEA (French Atomic Energy Commission) for the French replicate series of 900 MWe power plants, has identified accident sequences requiring long-term operation of some systems after the initiating event. They have been named long-term sequences. Quantification of probabilities of such sequences cannot rely exclusively on equipment failure-on-demand data: it must also take into account operating failures, the probability of which increase with time. Specific studies have therefore been conducted for a number of plant systems actuated during these long-term sequences. This has required: - Definition of the most realistic equipment utilization strategies based on existing emergency procedures for 900 MWe French plants. - Evaluation of the potential to repair failed equipment, given accessibility, repair time, and specific radiation conditions for the given sequence. - Definition of the event bringing the long-term sequence to an end. - Establishment of an appropriate quantification method, capable of taking into account the evolution of assumptions concerning equipment utilization strategies or repair conditions over time. The accident sequence quantification method based on realistic scenarios has been used in the risk assessment of the initiating event loss of reactor coolant accident occurring at power and at shutdown. Compared with the results obtained from conventional methods, this method redistributes the relative weight of accident sequences and also demonstrates that the long term can be a significant contribution to the probability of core melt

  20. Evaluation of food chain transfer data for use in accident consequence assessment

    International Nuclear Information System (INIS)

    Coughtrey, P.J.; Kirton, J.A.; Mitchell, N.G.

    1991-01-01

    Input data for the food chain transport component of radiological assessment models are summarised in the context of the sources of information available prior to the Chernobyl accident and those derived after the accident. Particular attention is devoted to interception and retention soil-to-plant, and plant-to-animal transfer, and to the applicability of environmental data to both equilibrium and time-dependent models. It is argued that much of the current uncertainty in parameter values for use in radiological assessment models reflects lack of understanding of processes involved in the various stages of transfer of radionuclides to man. The Chernobyl accident highlighted this lack of fundamental knowledge and illustrated a number of areas where further research and model development is justified. These areas are identified and suggestions given for appropriate research to support model development

  1. Comparative Assessment Of Natural Gas Accident Risks

    International Nuclear Information System (INIS)

    Burgherr, P.; Hirschberg, S.

    2005-01-01

    The study utilizes a hierarchical approach including (1) comparative analyses of different energy chains, (2) specific evaluations for the natural gas chain, and (3) a detailed overview of the German situation, based on an extensive data set provided by Deutsche Vereinigung des Gas- und Wasserfaches (DVGW). According to SVGW-expertise DVGW-data can be regarded as fully representative for Swiss conditions due to very similar technologies, management, regulations and safety culture, but has a substantially stronger statistical basis because the German gas grid is about 30 times larger compared to Switzerland. Specifically, the following tasks were carried out by PSI to accomplish the objectives of this project: (1) Consolidation of existing ENSAD data, (2) identification and evaluation of additional sources, (3) comparative assessment of accident risks, and (4) detailed evaluations of specific issues and technical aspects for severe and smaller accidents in the natural gas chain that are relevant under Swiss conditions. (author)

  2. Development Of Dynamic Probabilistic Safety Assessment: The Accident Dynamic Simulator (ADS) Tool

    International Nuclear Information System (INIS)

    Chang, Y.H.; Mosleh, A.; Dang, V.N.

    2003-01-01

    The development of a dynamic methodology for Probabilistic Safety Assessment (PSA) addresses the complex interactions between the behaviour of technical systems and personnel response in the evolution of accident scenarios. This paper introduces the discrete dynamic event tree, a framework for dynamic PSA, and its implementation in the Accident Dynamic Simulator (ADS) tool. Dynamic event tree tools generate and quantify accident scenarios through coupled simulation models of the plant physical processes, its automatic systems, the equipment reliability, and the human response. The current research on the framework, the ADS tool, and on Human Reliability Analysis issues within dynamic PSA, is discussed. (author)

  3. Development Of Dynamic Probabilistic Safety Assessment: The Accident Dynamic Simulator (ADS) Tool

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Y.H.; Mosleh, A.; Dang, V.N

    2003-03-01

    The development of a dynamic methodology for Probabilistic Safety Assessment (PSA) addresses the complex interactions between the behaviour of technical systems and personnel response in the evolution of accident scenarios. This paper introduces the discrete dynamic event tree, a framework for dynamic PSA, and its implementation in the Accident Dynamic Simulator (ADS) tool. Dynamic event tree tools generate and quantify accident scenarios through coupled simulation models of the plant physical processes, its automatic systems, the equipment reliability, and the human response. The current research on the framework, the ADS tool, and on Human Reliability Analysis issues within dynamic PSA, is discussed. (author)

  4. Saint-Laurent-des-Eaux plant - Report on the complementary safety assessment of nuclear facilities in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Saint-Laurent-des-Eaux plant to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the plant to withstand events beyond the level for which the plant was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence. Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like EDF's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. The creation of a nuclear rapid action force (FARN) is proposed: this will be a national emergency force made up of specialized teams equipped to intervene in less than 24 hours on a nuclear site hit by an accident. This report is divided into 8 main chapters: 1) features of the site, 2) earthquake risk, 3) flooding risk, 4) risks due to other extreme natural disasters, 5) the loss of electrical power supplies and of heat sink, 6) management of severe accidents (accidents with core melt), 7) task subcontracting policy, 8) synthesis and list of improvements. 4 following appendices review: EDF's crisis organization, the FARN, radiation protection organization and accidental event trees. (A.C.)

  5. Method for Assessing Risk of Road Accidents in Transportation of School Children

    Science.gov (United States)

    Pogotovkina, N. S.; Volodkin, P. P.; Demakhina, E. S.

    2017-11-01

    The rationale behind the problem being investigated is explained by the remaining high level of the accident rates with the participation of vehicles carrying groups of children, including school buses, in the Russian Federation over the period of several years. The article is aimed at the identification of new approaches to improve the safety of transportation of schoolchildren in accordance with the Concept of children transportation by buses and the plan for its implementation. The leading approach to solve the problem under consideration is the prediction of accidents in the schoolchildren transportation. The article presents the results of the accident rate analysis with the participation of school buses in the Russian Federation for five years. Besides, a system to monitor the transportation of schoolchildren is proposed; the system will allow analyzing and forecasting traffic accidents which involve buses carrying groups of children, including school buses. In addition, the article presents a methodology for assessing the risk of road accidents during the transportation of schoolchildren.

  6. Assessment in marine environment for a hypothetic nuclear accident based on the database of tidal harmonic constants

    International Nuclear Information System (INIS)

    Min, Byung-Il; Periáñez, Raúl; Park, Kihyun; Kim, In-Gyu; Suh, Kyung-Suk

    2014-01-01

    Highlights: • An oceanic dispersion assessment system has been developed. • The developed system is based on a database of tidal harmonic constants. • It used to evaluate pollutant behavior for the hypothetical nuclear accident. • It can predict the pollutant distributions with real-time in the ocean. - Abstract: The eleven nuclear power plants in operation, under construction and a well-planned plant in the east coast of China generally use seawater for reactor cooling. In this study, an oceanic dispersion assessment system based on a database of tidal harmonic constants is developed. This system can calculate the tidal current without a large computational cost, and it is possible to calculate real-time predictions of pollutant dispersions in the ocean. Calculated amplitudes and phases have maximum errors of 10% and 20% with observations, respectively. A number of hypothetical simulations were performed according to varying of the release starting time and duration of pollutant for the six nuclear sites in China. The developed system requires a computational time of one hour for one month of real-time forecasting in Linux OS. Thus, it can use to evaluate rapidly the dispersion characteristics of the pollutants released into the sea from a nuclear accident

  7. Assessment of radiation risks as a result of the Chernobyl accident

    International Nuclear Information System (INIS)

    Ivanov, V.K.

    1998-01-01

    Full text of publication follows: the Government of the former USSR had made decision on establishing common registry of exposed persons in several months after the Chernobyl accident. The registry had served in Medical Radiological Research Centre of Russian Academy of Medical Sciences, Obninsk City till 1992 (the time of dissolution of the USSR). Individual medical and dosimetric information on 659292 persons, including 284907 emergency accident workers (liquidators) had been collected for the period between 1986 and 1991. As of 01.01.1998, National Chernobyl Registry of the Russian Federation has kept individual data on 508236 persons including 167726 liquidators. As it is known, long-term epidemiological study of Hiroshima and Nagasaki A-bomb survivors resulted in statistically significant assessments of radiation risks for induction of cancer at the dose level above 0.5 Gy. Radiation doses after the Chernobyl accident do not exceed 0.3-0.5 Gy. That is why assessment of radiation risks at low radiation doses is a problem of great importance. As a result of the epidemiological studies performed on the basis of the Russian Chernobyl registry we pioneered the assessment of statistically significant radiation risks for induction of cancer at low radiation dose. (author)

  8. Learning Safety Assessment from Accidents in a University Environment

    OpenAIRE

    Jensen, Niels; Jørgensen, Sten Bay

    2013-01-01

    This contribution describes how a chemical engineering department started learning from accidents during experimental work and ended up implementing an industrially inspired system for risk assessment of new and existing experimental setups as well as a system for assessing potential risk from the chemicals used in the experimental work. These experiences have led to recent developments which focus increasingly on the a theoretical basis for modeling and reasoning on safety as well as operati...

  9. Evaluation of severe accident risk in the Pickering a risk assessment

    International Nuclear Information System (INIS)

    Dinnie, K.S.; Raina, V.M.

    1997-01-01

    The nature of the design of commercial power plants is such that significant impacts on public health can only occur if a number of barriers fail. Rigorous design and licensing requirements ensure that the more likely accidents do not fail all these barriers and their contribution to risk is likely to be small. The task of estimating accident risk must, therefore, focus more towards those less likely but potentially more serious combinations of failures that are characterized by the following: a) a large release of fission products into the containment atmosphere, b) a breach in the containment envelope, and c) the existence of a driving force to expel the containment atmosphere to the outside environment. The likelihood of such conditions existing simultaneously during the course of an accident is expected to be small, such that experience and data regarding the behaviour of plant systems under such conditions is sparse or non-existent. The challenge of Probabilistic Safety Assessments (PSAs) is to examine the potential for severe accidents using approaches that are sufficiently detailed and realistic to provide valid information regarding plant risk and susceptibilities, while simple enough to keep the analysis manageable. This paper outlines the key features of the Pickering A Risk Assessment (PARA) (1) and the manner in which it addresses these issues, and provides some insights into the results and conclusions drawn from the study. (author)

  10. Site assessment after a pipeline accident at Moutnice

    International Nuclear Information System (INIS)

    Kult, L.; Sara, V.; Vavra, J.

    1993-12-01

    The current condition of land contaminated with crude oil due to the accident which occurred at the Druzhba (Friendship) pipeline in 1988, and of the vegetation growing on it is assessed. The contours of maximum pollution shortly after the accident can be easily found based on the observed nonpolar substance contents in the soil. The pH values are about 7.4. Analyses revealed no elevated heavy metal contents as compared with normal unpolluted soil. The above-ground parts of barley exhibit retarded growth corresponding to the degree of soil pollution. With one exception, the vanadium and nickel contents of plants grown in the polluted soil are lower than as encountered in clean soil. In the most affected areas the level of pollution is too high to enable the land to be used for farming. (J.B.). 6 tabs., 5 figs

  11. Regulation Plans on Severe Accidents developed by KINS Severe Accident Regulation Preparation TFT

    International Nuclear Information System (INIS)

    Kim, Kyun Tae; Chung, Ku Young; Na, Han Bee

    2016-01-01

    Some nuclear power plants in Fukushima Daiichi site had lost their emergency reactor cooling function for long-time so the fuels inside the reactors were molten, and the integrity of containment was damaged. Therefore, large amount of radioactive material was released to environment. Because the social and economic effects of severe accidents are enormous, Korean Government already issued 'Severe Accident Policy' in 2001 which requires nuclear power plant operators to set up 'Quantitative Safety Goal', to do 'Probabilistic Safety Analysis', to install 'Severe Accident Countermeasures' and to make 'Severe Accident Management Plan'. After the Fukushima disaster, a Special Safety Inspection was performed for all operating nuclear power plants of Korea. The inspection team from industry, academia, and research institutes assessed Korean NPPs capabilities to cope with or respond to severe accidents and emergency situation caused by natural disasters such as a large earthquake or tsunami. As a result of the special inspection, about 50 action items were identified to increase the capability to cope with natural disaster and severe accidents. Nuclear Safety Act has been amended to require NPP operators to submit Accident Management Plant as part of operating license application. The KINS Severe Accident Regulation Preparation TFT had first investigated oversea severe accident regulation trend before and after the Fukushima accident. Then, the TFT has developed regulation draft for severe accidents such as Severe accident Management Plans, the required design features for new NPPs to prevent severe accident against multiple failures and beyond-design external events, countermeasures to mitigate severe accident and to keep the integrity of containment, and assessment methodology on safety assessment plan and probabilistic safety assessment

  12. Development of integrated accident management assessment technology

    International Nuclear Information System (INIS)

    Jung, Won Dea; Ha, Jae Joo; Jin, Young Ho

    2002-04-01

    This project aims to develop critical technologies for accident management through securing evaluation frameworks and supporting tools, in order to enhance capabilities coping with severe accidents. For the research goal, firstly under the viewpoint of accident prevention, on-line risk monitoring system and the analysis framework for human error have been developed. Secondly, the training/supporting systems including the training simulator and the off-site risk evaluation system have been developed to enhance capabilities coping with severe accidents. Four kinds of research results have been obtained from this project. Firstly, the framework and taxonomy for human error analysis has been developed for accident management. As the second, the supporting system for accident managements has been developed. Using data that are obtained through the evaluation of off-site risk for Younggwang site, the risk database as well as the methodology for optimizing emergency responses has been constructed. As the third, a training support system, SAMAT, has been developed, which can be used as a training simulator for severe accident management. Finally, on-line risk monitoring system, DynaRM, has been developed for Ulchin 3 and 4 unit

  13. Formation of decontamination cost calculation model for severe accident consequence assessment

    International Nuclear Information System (INIS)

    Silva, Kampanart; Promping, Jiraporn; Okamoto, Koji; Ishiwatari, Yuki

    2014-01-01

    In previous studies, the authors developed an index “cost per severe accident” to perform a severe accident consequence assessment that can cover various kinds of accident consequences, namely health effects, economic, social and environmental impacts. Though decontamination cost was identified as a major component, it was taken into account using simple and conservative assumptions, which make it difficult to have further discussions. The decontamination cost calculation model was therefore reconsidered. 99 parameters were selected to take into account all decontamination-related issues, and the decontamination cost calculation model was formed. The distributions of all parameters were determined. A sensitivity analysis using the Morris method was performed in order to identify important parameters that have large influence on the cost per severe accident and large extent of interactions with other parameters. We identified 25 important parameters, and fixed most negligible parameters to the median of their distributions to form a simplified decontamination cost calculation model. Calculations of cost per severe accident with the full model (all parameters distributed), and with the simplified model were performed and compared. The differences of the cost per severe accident and its components were not significant, which ensure the validity of the simplified model. The simplified model is used to perform a full scope calculation of the cost per severe accident and compared with the previous study. The decontamination cost increased its importance significantly. (author)

  14. ASSESSING ACCIDENT HOTSPOTS BY USING VOLUNTEERED GEOGRAPHIC INFORMATION

    Directory of Open Access Journals (Sweden)

    Golnoosh

    2017-11-01

    Full Text Available Due to the ever-increasing number of vehicles, transportation issues, especially transportation safety have gained great importance. One of the social problems in the world, and particularly in developing countries, which each year imposes great casualties, and economic, social and cultural costs on society, is traffic accidents. Traffic accidents cause waste of time and assets and loss of human resources in society, therefore studies and measures to reduce accidents and damage caused by them, particularly in recent decades, has become important. One of the suggested ways to deal with the problem of car accidents is the modeling of accident-prone points, as by identifying these points, factors affecting accidents can be identified, and elimination of these factors leads to a reduction in accidents. Numerous studies have been conducted in this respect, using official police data to identify these points and performing necessary analysis on them. Official data has gaps and shortcomings. Using Volunteered Geographic Information to determine accident-prone venues can be a suitable answer to the problems of using official data. The aim of this study is the use of volunteered geographic information in relation to the accidents and their causes. By taking into account factors affecting traffic accidents in the study area, and determining the importance of each factor, as well as the severity-of-accidents parameter, and using the Expert Choice software, a decision-making software based on the hierarchical analysis, high-risk venues are determined, and the accident-prone points of the study area are specified.

  15. A Model for Traffic Accidents Prediction Based on Driver Personality Traits Assessment

    Directory of Open Access Journals (Sweden)

    Marjana Čubranić-Dobrodolac

    2017-12-01

    Full Text Available The model proposed in this paper uses four psychological instruments for assessing driver behaviour and personality traits aiming to find a relationship between the considered constructs and the occurrence of traffic accidents. A Barratt Impulsiveness Scale (BIS-11 was used for the assessment of impulsivity, Aggressive Driving Behaviour Questionnaire (ADBQ for assessing the aggressiveness while driving, Manchester Driver Attitude Questionnaire (DAQ and the Questionnaire for self-assessment of driving ability. Besides these instruments, the participants filled out an extensive demographic survey. Within the statistical analysis, in addition to the descriptive indicators, correlation coefficients were calculated and four hierarchical regression analyses were performed to determine the predictive power of personality traits on the occurrence of traffic accidents. Further, to confirm the results and to obtain additional information about the relationship between the considered variables, the structural equation modelling and binary logistic regression have been implemented. A sample of this research covered 305 drivers, of which there were 100 bus drivers and 102 truck drivers, as well as 103 drivers of privately owned vehicles. The results indicate that BIS-11 and ADBQ questionnaires show the best predictive power which means that impulsivity and aggressiveness as personality traits have the greatest influence on the occurrence of traffic accidents. This research could be useful in many fields, such as the design of selection procedures for professional drivers, development of programs for the prevention of traffic accidents and violations of law, rehabilitation of drivers who have been deprived of the driving license, etc.

  16. Testing of an accident consequence assessment model using field data

    International Nuclear Information System (INIS)

    Homma, Toshimitsu; Matsubara, Takeshi; Tomita, Kenichi

    2007-01-01

    This paper presents the results obtained from the application of an accident consequence assessment model, OSCAAR to the Iput dose reconstruction scenario of BIOMASS and also to the Chernobyl 131 I fallout scenario of EMRAS, both organized by International Atomic Energy Agency. The Iput Scenario deals with 137 Cs contamination of the catchment basin and agricultural area in the Bryansk Region of Russia, which was heavily contaminated after the Chernobyl accident. This exercise was used to test the chronic exposure pathway models in OSCAAR with actual measurements and to identify the most important sources of uncertainty with respect to each part of the assessment. The OSCAAR chronic exposure pathway models had some limitations but the refined model, COLINA almost successfully reconstructed the whole 10-year time course of 137 Cs activity concentrations in most requested types of agricultural products and natural foodstuffs. The Plavsk scenario provides a good opportunity to test not only the food chain transfer model of 131 I but also the method of assessing 131 I thyroid burden. OSCAAR showed in general good capabilities for assessing the important 131 I exposure pathways. (author)

  17. Regulation Plans on Severe Accidents developed by KINS Severe Accident Regulation Preparation TFT

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyun Tae; Chung, Ku Young; Na, Han Bee [KINS, Daejeon (Korea, Republic of)

    2016-05-15

    Some nuclear power plants in Fukushima Daiichi site had lost their emergency reactor cooling function for long-time so the fuels inside the reactors were molten, and the integrity of containment was damaged. Therefore, large amount of radioactive material was released to environment. Because the social and economic effects of severe accidents are enormous, Korean Government already issued 'Severe Accident Policy' in 2001 which requires nuclear power plant operators to set up 'Quantitative Safety Goal', to do 'Probabilistic Safety Analysis', to install 'Severe Accident Countermeasures' and to make 'Severe Accident Management Plan'. After the Fukushima disaster, a Special Safety Inspection was performed for all operating nuclear power plants of Korea. The inspection team from industry, academia, and research institutes assessed Korean NPPs capabilities to cope with or respond to severe accidents and emergency situation caused by natural disasters such as a large earthquake or tsunami. As a result of the special inspection, about 50 action items were identified to increase the capability to cope with natural disaster and severe accidents. Nuclear Safety Act has been amended to require NPP operators to submit Accident Management Plant as part of operating license application. The KINS Severe Accident Regulation Preparation TFT had first investigated oversea severe accident regulation trend before and after the Fukushima accident. Then, the TFT has developed regulation draft for severe accidents such as Severe accident Management Plans, the required design features for new NPPs to prevent severe accident against multiple failures and beyond-design external events, countermeasures to mitigate severe accident and to keep the integrity of containment, and assessment methodology on safety assessment plan and probabilistic safety assessment.

  18. Utilization of dose assessment models to facilitate off-site recovery operations for accidents at nuclear facilities

    International Nuclear Information System (INIS)

    Dickerson, M.H.; Foster, K.T.

    1989-09-01

    One of the most important uses of dose assessment models in response to accidents at nuclear facilities is to help provide guidance to emergency response managers for identifying, and mitigating, the consequences of an accident once the accident has been terminated. By combining results from assessment models with radiological measurements, a qualitative methodology can be developed to aid emergency response managers in determining the total dose received by the population and to minimize future doses through the use of mitigation procedures. To illustrate the methodology, this discussion focuses on the use of models to estimate the dose delivered to the public both during and after a nuclear accident. 4 refs., 10 figs., 1 tab

  19. Assessment of Technogenic Accident Risk of Industrial Building Structures

    Science.gov (United States)

    Baiburin, D. A.; Baiburin, A. Kh

    2017-11-01

    A methodology for assessing the risk of an industrial building accident was developed taking into account the damage caused by various localization of collapse. Before the beginning of the survey of a facility technical condition, groups including the same type of building structures are selected. Further, assessment is made for the reduction in their load-carrying capacity from the strength and stability conditions taking into account defects. The characteristics of the influence of defects and structural damage on a building safety is the degree of compliance with the standards expressed by the reliability level. Reliability levels assignment is carried out on the basis of calculations, operating experience and inspection of a particular type of structure according to the formalized rules. The risk of collapse according to a separate scenario is calculated for structures that are capable and incapable of causing a progressive ossification. The results of the technique application are based on the analysis of the accident risk at the welding shop “Vysota (Height) 239” of the Chelyabinsk Pipe Rolling Plant.

  20. Cernavoda CANDU severe accident evaluation

    International Nuclear Information System (INIS)

    Negut, G.; Marin, A.

    1997-01-01

    The papers present the activities dedicated to Romania Cernavoda Nuclear Power Plant first CANDU Unit severe accident evaluation. This activity is part of more general PSA assessment activities. CANDU specific safety features are calandria moderator and calandria vault water capabilities to remove the residual heat in the case of severe accidents, when the conventional heat sinks are no more available. Severe accidents evaluation, that is a deterministic thermal hydraulic analysis, assesses the accidents progression and gives the milestones when important events take place. This kind of assessment is important to evaluate to recovery time for the reactor operators that can lead to the accident mitigation. The Cernavoda CANDU unit is modeled for the of all heat sinks accident and results compared with the AECL CANDU 600 assessment. (orig.)

  1. An assessment the severe accident equipment survivability for the Korean Next Generation Reactor

    International Nuclear Information System (INIS)

    Lee, B. C.; Moon, Y. T.; Park, J. W.; Kho, H. J.; Lee, S. W.

    1999-01-01

    One of the prominent design approaches to cope with the severe accident challenges in the Korean Next Generation Reactor is an assessment of equipment survivability in the severe accident environment at early design stage. In compliance with 10CFR50.34(f) and SECY-93-087, this work addresses that a reasonable level of assurance be provided to demonstrate that sufficient instrumentation and equipment will survive the consequences of a severe accident and will be available so that the operator may recover from and trend severe core damage sequences, including those scenarios which result in 100 percent oxidation of the active fuel cladding. An analytical and systematic approach was used to identify the equipment and instrumentation of safety-function and define severe accident environments including temperature, pressure, humidity, and radiation before and after the reactor vessel breach. As a result, it was concluded that with minor exceptions, existing design basis equipment qualification methods are sufficient to provide a reasonable level of assurance that this equipment will function during a severe accident. Furthermore, supplemental severe accident equipment and instrument procurement requirements were identified. (author)

  2. [School accidents--an epidemiological assessment of injury types and treatment effort].

    Science.gov (United States)

    Kraus, R; Heiss, C; Alt, V; Schnettler, R

    2006-10-01

    Children and adolescents spend up to 50% of their time at school. The purpose of this study was to assess injury patterns with their treatment of school accidents in a Trauma Service of a German University Hospital and to compare these data to the literature. All school accidents from 01.07.1999 to 30.06.2004 were statistically analysed in a retrospective manner by chart review. There were 1399 school accidents treated in our department. Average age of the injured children was 11.8 years with a boy:girl ratio of 3:2. Almost 40% of the injuries occurred during school sport. The most frequently injured region was the upper extremity including the hand (36.8%). Distortion and contusion were the most frequent diagnoses of all injuries. 16% of the cases had to be treated surgically and/or under general anaesthesia and also a total of 16% of the patients had to be admitted to the hospital. It can be concluded for school facilities that special attention has to be paid during school sports activity and breaks because they account for most accidents. Traffic education may reduce severe injuries. For diagnosis and treatment of school accidents specific knowledge of the growing longbones of the upper extremity and the hand is important.

  3. Assessment of severe accident prevention and mitigation features: PWR, large dry containment design

    International Nuclear Information System (INIS)

    Perkins, K.R.; Hsu, C.J.; Lehner, J.R.; Luckas, W.J.; Cho, N.; Fitzpatrick, R.G.; Pratt, W.T.; Eltawila, F.; Maly, J.A.

    1988-07-01

    Plant features and operator actions which have been found to be important in either preventing or mitigating severe accidents in PWRs with large dry containments have been identified. These features and actions were developed from insights derived from reviews of risk assessments performed specifically for the Zion plant and from assessments of other relevant studies. Accident sequences that dominate the core-damage frequency and those accident sequences that are of potentially high consequence were identified. Vulnerabilities of the large dry containment to severe accident containment loads were also identified. In addition, those features of a PWR with a large dry containment, which are important for preventing core damage and are available for mitigating fission-product release to the environment were identified. The report is issued to provide focus to the analyst examining an individual plant. The report calls attention to plant features and operator actions and provides a list of deterministic tributes for assessing those features and actions found to be helpful in reducing the overall risk for Zion and other PWRs with large dry containments. Thus, the guidance is offered as a resource in examining the subject plant to determine if the same, or similar, plant features and operator actions will be of value in reducing overall plant risk. This report is intended to serve solely as guidance

  4. Assessment of severe accident prevention and mitigation features: PWR, ice-condenser containment design

    International Nuclear Information System (INIS)

    Hsu, C.J.; Perkins, K.R.; Luckas, W.J.; Fitzpatrick, R.G.; Cho, N.; Lehner, J.R.; Pratt, W.T.; Eltawila, F.; Maly, J.A.

    1988-07-01

    Plant features and operator actions which have been found to be important in either preventing and mitigating severe accidents in PWRs with ice-condenser containments have been identified. Thus features and actions were developed from insights derived from reviews of risk assessments performed specifically for the Sequoyah plant and from assessments of other relevant studies. Accident sequences that dominate the core-damage frequency and those accident sequences that are of potentially high consequence were identified. Vulnerabilities of the ice-condenser containment to sever accident containment loads were also identified. In addition, those features of a PWR with an ice-condenser containment, which are important for preventing core damage and are available for mitigating fission-product release to the environment were identified. This report is issued to provide focus to an analyst examining an individual plant. The report calls attention to plant features and operator actions and provides a list of deterministic attributes for assessing those features and actions found to be helpful in reducing the overall risk for Sequoyah and other PWRs with ice-condenser containments. Thus, the guidance is offered as a resource in examining the subject plant to determine if the same, or similar, plant features and operator actions will be of value in reducing overall plant risk. This report is intended to serve solely as guidance. 14 tabs

  5. A review of severe accident assessment

    International Nuclear Information System (INIS)

    Kawashima, Kei

    2000-01-01

    One of the most difficult problems on evaluation of external costs on nuclear power generation is value on a severe accident risk. Once forming a severe accident, its effect is very important and extends to a wide range, to give a lot of damages. It is a main area of study on externality of energy to compare various risks by means of price conversion at unit kWh. Here was outlined on research examples on main severe accident risks before then. A common fact on estimation cost such research examples is to limit it to direct cost (mainly to health damage) at accident phenomenon. As an actual problem, it is very difficult to substantially quantify such parameters because of basically belonging to social psychology. It is due to no finding out decisive evaluation method on this problem to be adopted conventional EED (Expert Expected Damages) approach in the ExternE Phase III, either. (G.K.)

  6. Severe Accident Progression and Consequence Assessment Methodology Upgrades in ISAAC for Wolsong CANDU6

    International Nuclear Information System (INIS)

    Song, Y.M.; Kim, D.H.; Nijhawan, Sunil

    2015-01-01

    Amongst the applications of integrated severe accident analysis codes like ISAAC, the principal are to a) help develop an understanding of the severe accident progression and its consequences; b) support the design of mitigation measures by providing for them the state of the reactor following an accident; and c) to provide a training platform for accident management actions. After Fukushima accident there is an increased awareness of the need to implement effective and appropriate mitigation measures and empower the operators with training and understanding about severe accident progression and control opportunities. An updated code with reduced uncertainties can better serve these needs of the utility making decisions about mitigation measures and corrective actions. Optimal deployment of systems such as PARS and filtered containment venting require information on reactor transients for a number of critical parameters. Thus there is a greater consensus now for a demonstrated ability to perform accident progression and consequence assessment analyses with reduced uncertainties. Analyses must now provide source term transients that represent the best in available understanding and so meaningfully support mitigation measures. This requires removal of known simplifications and inclusion of all quantifiable and risk significant phenomena. Advances in understanding of CANDU6 severe accident progression reflected in the severe accident integrated code ROSHNI are being incorporated into ISAAC using CANDU specific component and system models developed and verified for Wolsong CANDU 6 reactors. A significant and comprehensive upgrade of core behavior models is being implemented in ISAAC to properly reflect the large variability amongst fuel channels in feeder geometry, fuel thermal powers and burnup. The paper summarizes the models that have been added and provides some results to illustrate code capabilities. ISAAC is being updated to meet the current requirements and

  7. Severe Accident Progression and Consequence Assessment Methodology Upgrades in ISAAC for Wolsong CANDU6

    Energy Technology Data Exchange (ETDEWEB)

    Song, Y.M.; Kim, D.H. [KAERI, Daejeon (Korea, Republic of); Nijhawan, Sunil [Prolet Inc. 98 Burbank Drive, Toronto (Canada)

    2015-05-15

    Amongst the applications of integrated severe accident analysis codes like ISAAC, the principal are to a) help develop an understanding of the severe accident progression and its consequences; b) support the design of mitigation measures by providing for them the state of the reactor following an accident; and c) to provide a training platform for accident management actions. After Fukushima accident there is an increased awareness of the need to implement effective and appropriate mitigation measures and empower the operators with training and understanding about severe accident progression and control opportunities. An updated code with reduced uncertainties can better serve these needs of the utility making decisions about mitigation measures and corrective actions. Optimal deployment of systems such as PARS and filtered containment venting require information on reactor transients for a number of critical parameters. Thus there is a greater consensus now for a demonstrated ability to perform accident progression and consequence assessment analyses with reduced uncertainties. Analyses must now provide source term transients that represent the best in available understanding and so meaningfully support mitigation measures. This requires removal of known simplifications and inclusion of all quantifiable and risk significant phenomena. Advances in understanding of CANDU6 severe accident progression reflected in the severe accident integrated code ROSHNI are being incorporated into ISAAC using CANDU specific component and system models developed and verified for Wolsong CANDU 6 reactors. A significant and comprehensive upgrade of core behavior models is being implemented in ISAAC to properly reflect the large variability amongst fuel channels in feeder geometry, fuel thermal powers and burnup. The paper summarizes the models that have been added and provides some results to illustrate code capabilities. ISAAC is being updated to meet the current requirements and

  8. Development of radiation dose assessment system for radiation accident (RADARAC)

    International Nuclear Information System (INIS)

    Takahashi, Fumiaki; Shigemori, Yuji; Seki, Akiyuki

    2009-07-01

    The possibility of radiation accident is very rare, but cannot be regarded as zero. Medical treatments are quite essential for a heavily exposed person in an occurrence of a radiation accident. Radiation dose distribution in a human body is useful information to carry out effectively the medical treatments. A radiation transport calculation utilizing the Monte Carlo method has an advantageous in the analysis of radiation dose inside of the body, which cannot be measured. An input file, which describes models for the accident condition and quantities of interest, should be prepared to execute the radiation transport calculation. Since the accident situation, however, cannot be prospected, many complicated procedures are needed to make effectively the input file soon after the occurrence of the accident. In addition, the calculated doses are to be given in output files, which usually include much information concerning the radiation transport calculation. Thus, Radiation Dose Assessment system for Radiation Accident (RADARAC) was developed to derive effectively radiation dose by using the MCNPX or MCNP code. RADARAC mainly consists of two parts. One part is RADARAC - INPUT, which involves three programs. A user can interactively set up necessary resources to make input files for the codes, with graphical user interfaces in a personnel computer. The input file includes information concerning the geometric structure of the radiation source and the exposed person, emission of radiations during the accident, physical quantities of interest and so on. The other part is RADARAC - DOSE, which has one program. The results of radiation doses can be effectively indicated with numerical tables, graphs and color figures visibly depicting dose distribution by using this program. These results are obtained from the outputs of the radiation transport calculations. It is confirmed that the system can effectively make input files with a few thousand lines and indicate more than 20

  9. Review and assessment of package requirements (yellowcake) and emergency response to transportation accidents

    International Nuclear Information System (INIS)

    1978-10-01

    As a consequence of an accident involving a truck shipment of yellowcake, a joint NRC--DOT study was undertaken to review and assess the regulations and practices related to package integrity and to emergency response to transportation accidents involving low specific activity radioactive materials. Recommendations are made regarding the responsibilities of state and local agencies, carriers, and shippers, and the DOT and NRC regulations

  10. Development of a dose assessment computer code for the NPP severe accident

    International Nuclear Information System (INIS)

    Cheong, Jae Hak

    1993-02-01

    A real-time emergency dose assessment computer code called KEDA (KAIST NPP Emergency Dose Assessment) has been developed for the NPP severe accident. A new mathematical model which can calculate cloud shine has been developed and implemented in the code. KEDA considers the specific Korean situations(complex topography, orientals' thyroid metabolism, continuous washout, etc.), and provides functions of dose-monitoring and automatic decision-making. To verify the code results, KEDA has been compared with an NRC officially certified code, RASCAL, for eight hypertical accident scenarios. Through the comparison, KEDA has been proved to provide reasonable results. Qualitative sensitivity analysis also the been performed for potentially important six input parameters, and the trends of the dose v.s. down-wind distance curve have been analyzed comparing with the physical phenomena occurred in the real atmosphere. The source term and meteorological conditions are turned out to be the most important input parameters. KEDA also has been applied to simulate Kori site and a hyperthetical accident with semi-real meteorological data has been simulated and analyzed

  11. Study on the code system for the off-site consequences assessment of severe nuclear accident

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sora; Mn, Byung Il; Park, Ki Hyun; Yang, Byung Mo; Suh, Kyung Suk [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-12-15

    The importance of severe nuclear accidents and probabilistic safety assessment (PSA) were brought to international attention with the occurrence of severe nuclear accidents caused by the extreme natural disaster at Fukushima Daiichi nuclear power plant in Japan. In Korea, studies on level 3 PSA had made little progress until recently. The code systems of level 3 PSA, MACCS2 (MELCORE Accident Consequence Code System 2, US), COSYMA (COde SYstem from MAria, EU) and OSCAAR (Off-Site Consequence Analysis code for Atmospheric Releases in reactor accidents, JAPAN), were reviewed in this study, and the disadvantages and limitations of MACCS2 were also analyzed. Experts from Korea and abroad pointed out that the limitations of MACCS2 include the following: MACCS2 cannot simulate multi-unit accidents/release from spent fuel pools, and its atmospheric dispersion is based on a simple Gaussian plume model. Some of these limitations have been improved in the updated versions of MACCS2. The absence of a marine and aquatic dispersion model and the limited simulating range of food-chain and economic models are also important aspects that need to be improved. This paper is expected to be utilized as basic research material for developing a Korean code system for assessing off-site consequences of severe nuclear accidents.

  12. Study on the code system for the off-site consequences assessment of severe nuclear accident

    International Nuclear Information System (INIS)

    Kim, Sora; Mn, Byung Il; Park, Ki Hyun; Yang, Byung Mo; Suh, Kyung Suk

    2016-01-01

    The importance of severe nuclear accidents and probabilistic safety assessment (PSA) were brought to international attention with the occurrence of severe nuclear accidents caused by the extreme natural disaster at Fukushima Daiichi nuclear power plant in Japan. In Korea, studies on level 3 PSA had made little progress until recently. The code systems of level 3 PSA, MACCS2 (MELCORE Accident Consequence Code System 2, US), COSYMA (COde SYstem from MAria, EU) and OSCAAR (Off-Site Consequence Analysis code for Atmospheric Releases in reactor accidents, JAPAN), were reviewed in this study, and the disadvantages and limitations of MACCS2 were also analyzed. Experts from Korea and abroad pointed out that the limitations of MACCS2 include the following: MACCS2 cannot simulate multi-unit accidents/release from spent fuel pools, and its atmospheric dispersion is based on a simple Gaussian plume model. Some of these limitations have been improved in the updated versions of MACCS2. The absence of a marine and aquatic dispersion model and the limited simulating range of food-chain and economic models are also important aspects that need to be improved. This paper is expected to be utilized as basic research material for developing a Korean code system for assessing off-site consequences of severe nuclear accidents

  13. Severe accident phenomena

    International Nuclear Information System (INIS)

    Jokiniemi, J.; Kilpi, K.; Lindholm, I.; Maekynen, J.; Pekkarinen, E.; Sairanen, R.; Silde, A.

    1995-02-01

    Severe accidents are nuclear reactor accidents in which the reactor core is substantially damaged. The report describes severe reactor accident phenomena and their significance for the safety of nuclear power plants. A comprehensive set of phenomena ranging from accident initiation to containment behaviour and containment integrity questions are covered. The report is based on expertise gained in the severe accident assessment projects conducted at the Technical Research Centre of Finland (VTT). (49 refs., 32 figs., 12 tabs.)

  14. Systematic approach for assessment of accident risks in chemical and nuclear processing

    International Nuclear Information System (INIS)

    Senne Junior, Murillo

    2003-07-01

    The industrial accidents which occurred in the last years, particularly in the 80's, contributed a significant way to draw the attention of the government, industry and the society as a whole to the mechanisms for preventing events that could affect people's safety and the environment quality. Techniques and methods extensively used the nuclear, aeronautic and war industries so far were adapted to performing analysis and evaluation of the risks associated to other industrial activities, especially in the petroleum, chemistry and petrochemical areas. The risk analysis in industrial facilities is carried out through the evaluation of the probability or frequency of the accidents and their consequences. However, no systematized methodology that could supply the tools for identifying possible accidents likely to take place in an installation is available in the literature. Neither existing are methodologies for the identification of the models for evaluation of the accidents' consequences nor for the selection of the available techniques for qualitative or quantitative analysis of the possibility of occurrence of the accident being focused. The objective of this work is to develop and implement a methodology for identification of the risks of accidents in chemical and nuclear processing facilities as well as for the evaluation of their consequences on persons. For the development of the methodology, the main possible accidents that could occur in such installations were identified and the qualitative and quantitative techniques available for the identification of the risks and for the evaluation of the consequences of each identified accidents were selected. The use of the methodology was illustrated by applying it in two case examples adapted from the literature, involving accidents with inflammable, explosives, and radioactive materials. The computer code MRA - Methodology for Risk Assessment was developed using DELPHI, version 5.0, with the purpose of systematizing

  15. Fast dose assessment models, parameters and code under accident conditions for Qinshan Nuclear Power Plant

    International Nuclear Information System (INIS)

    Zhang, Z.Y.; Hu, E.B.; Meng, X.C.; Zhang, Y.; Yao, R.T.

    1993-01-01

    According to requirement of accident emergency plan for Qinshan Nuclear Power Plant, a Gaussian straight-line model was adopted for estimating radionuclide concentration in surface air. In addition, the effects of mountain body on atmospheric dispersion was considered. By combination of field atmospheric dispersion experiment and wind tunnel modeling test, necessary modifications have been done for some models and parameters. A computer code for assessment was written in Quick BASIC (V4.5) language. The radius of assessment region is 10 km and the code is applicable to early accident assessment. (1 tab.)

  16. Rapid assessment of accidental exposures (RACE) with MCP-N (LiF:Mg,Cu,P) detectors

    International Nuclear Information System (INIS)

    Budzanowski, M.; Bilski, P.; Olko, P.; Saez-Vergara, J.C.; Gomes-Ros, J.M.

    1998-01-01

    The system is based on a new generation of ultra-sensitive thermoluminescent dosemeters and is able to monitor environmental radiation doses at a large number of locations within few days and to perform rapid (24 - 48 hours) in situ dose assessment in the event of any nuclear or radiation accident. Technical specifications of the instrumentation and procedures of the system are given. The linearity of the detector response for doses within the range of 1 μGy to 1 Gy is better than 2%. All the detectors investigated demonstrated a good stability in long-term exposure. The detectors are fully comparable with active detectors in short-term and daily routine dose rate measurements. (M.D.)

  17. Learning Safety Assessment from Accidents in a University Environment

    DEFF Research Database (Denmark)

    Jensen, Niels; Jørgensen, Sten Bay

    2013-01-01

    This contribution describes how a chemical engineering department started learning from accidents during experimental work and ended up implementing an industrially inspired system for risk assessment of new and existing experimental setups as well as a system for assessing potential risk from...... the chemicals used in the experimental work. These experiences have led to recent developments which focus increasingly on the a theoretical basis for modeling and reasoning on safety as well as operational aspects within a common framework. Presently this framework is being extended with barrier concepts both...

  18. PROBABILISTIC SAFETY ASSESSMENT OF OPERATIONAL ACCIDENTS AT THE WASTE ISOLATION PILOT PLANT

    International Nuclear Information System (INIS)

    Rucker, D.F.

    2000-01-01

    This report presents a probabilistic safety assessment of radioactive doses as consequences from accident scenarios to complement the deterministic assessment presented in the Waste Isolation Pilot Plant (WIPP) Safety Analysis Report (SAR). The International Council of Radiation Protection (ICRP) recommends both assessments be conducted to ensure that ''an adequate level of safety has been achieved and that no major contributors to risk are overlooked'' (ICRP 1993). To that end, the probabilistic assessment for the WIPP accident scenarios addresses the wide range of assumptions, e.g. the range of values representing the radioactive source of an accident, that could possibly have been overlooked by the SAR. Routine releases of radionuclides from the WIPP repository to the environment during the waste emplacement operations are expected to be essentially zero. In contrast, potential accidental releases from postulated accident scenarios during waste handling and emplacement could be substantial, which necessitates the need for radiological air monitoring and confinement barriers (DOE 1999). The WIPP Safety Analysis Report (SAR) calculated doses from accidental releases to the on-site (at 100 m from the source) and off-site (at the Exclusive Use Boundary and Site Boundary) public by a deterministic approach. This approach, as demonstrated in the SAR, uses single-point values of key parameters to assess the 50-year, whole-body committed effective dose equivalent (CEDE). The basic assumptions used in the SAR to formulate the CEDE are retained for this report's probabilistic assessment. However, for the probabilistic assessment, single-point parameter values were replaced with probability density functions (PDF) and were sampled over an expected range. Monte Carlo simulations were run, in which 10,000 iterations were performed by randomly selecting one value for each parameter and calculating the dose. Statistical information was then derived from the 10,000 iteration

  19. PROBABILISTIC SAFETY ASSESSMENT OF OPERATIONAL ACCIDENTS AT THE WASTE ISOLATION PILOT PLANT

    Energy Technology Data Exchange (ETDEWEB)

    Rucker, D.F.

    2000-09-01

    This report presents a probabilistic safety assessment of radioactive doses as consequences from accident scenarios to complement the deterministic assessment presented in the Waste Isolation Pilot Plant (WIPP) Safety Analysis Report (SAR). The International Council of Radiation Protection (ICRP) recommends both assessments be conducted to ensure that ''an adequate level of safety has been achieved and that no major contributors to risk are overlooked'' (ICRP 1993). To that end, the probabilistic assessment for the WIPP accident scenarios addresses the wide range of assumptions, e.g. the range of values representing the radioactive source of an accident, that could possibly have been overlooked by the SAR. Routine releases of radionuclides from the WIPP repository to the environment during the waste emplacement operations are expected to be essentially zero. In contrast, potential accidental releases from postulated accident scenarios during waste handling and emplacement could be substantial, which necessitates the need for radiological air monitoring and confinement barriers (DOE 1999). The WIPP Safety Analysis Report (SAR) calculated doses from accidental releases to the on-site (at 100 m from the source) and off-site (at the Exclusive Use Boundary and Site Boundary) public by a deterministic approach. This approach, as demonstrated in the SAR, uses single-point values of key parameters to assess the 50-year, whole-body committed effective dose equivalent (CEDE). The basic assumptions used in the SAR to formulate the CEDE are retained for this report's probabilistic assessment. However, for the probabilistic assessment, single-point parameter values were replaced with probability density functions (PDF) and were sampled over an expected range. Monte Carlo simulations were run, in which 10,000 iterations were performed by randomly selecting one value for each parameter and calculating the dose. Statistical information was then derived

  20. Assessment of accident risks from german nuclear plants

    International Nuclear Information System (INIS)

    Heuser, F.W.

    1979-01-01

    The German risk study are presented. The main objectives can be summed up as follows: (a) An assessment of the societal risk due to accidents in nuclear power plants with reference to German conditions; (b) To get experience in the field of risk analysis and to provide a basis for estimation of uncertainties; (c) To provide guidance for future activities in the German Reactor Safety Research Program. Finally several conclusions reached by this study are discussed. (author)

  1. Preventive radioecological assessment of territory for optimization of monitoring and countermeasures after radiation accidents.

    Science.gov (United States)

    Prister, B S; Vinogradskaya, V D; Lev, T D; Talerko, M M; Garger, E K; Onishi, Y; Tischenko, O G

    2018-04-01

    A methodology of a preventive radioecological assessment of the territory has been developed for optimizing post-emergency monitoring and countermeasure implementation in an event of a severe radiation accident. Approaches and main stages of integrated radioecological zoning of the territory are described. An algorithm for the assessment of the potential radioecological criticality (sensitivity) of the area is presented. The proposed approach is validated using data of the dosimetric passportization in Ukraine after the Chernobyl accident for the test site settlements. Copyright © 2018 Elsevier Ltd. All rights reserved.

  2. Atmospheric tracer tests and assessment of a potential accident at the National Medical Cyclotron, Camperdown, NSW, Australia

    International Nuclear Information System (INIS)

    Clark, G.H.; Bartsch, F.J.K.; Stone, D.J.M.

    1994-08-01

    In order to assess the impact of a potential atmospheric release of radionuclides from the National Medical Cyclotron facility, in Camperdown, an atmospheric tracer release, sampling and analysis system using SF 6 was developed. During eight experiments conducted in a variety of meteorological conditions, ten samplers were located in the vicinity of the Cyclotron building and other nearby buildings on the rapid downward movement of the tracer gas plume. The atmospheric dilution factors which lead to the highest observed air concentrations were then applied to the releases of I 123 and Xe 123 from a potential accident scenario in order to assess the impact on nearby receptors. Even given the conservative assumptions about the release of I 123 , the estimated radiation doses were at least an order of magnitude below the international standards for doses to member of the public. 27 refs., 8 tabs., 5 figs

  3. Atmospheric tracer tests and assessment of a potential accident at the National Medical Cyclotron, Camperdown, NSW, Australia

    Energy Technology Data Exchange (ETDEWEB)

    Clark, G H; Bartsch, F J.K.; Stone, D J.M.

    1994-08-01

    In order to assess the impact of a potential atmospheric release of radionuclides from the National Medical Cyclotron facility, in Camperdown, an atmospheric tracer release, sampling and analysis system using SF{sub 6} was developed. During eight experiments conducted in a variety of meteorological conditions, ten samplers were located in the vicinity of the Cyclotron building and other nearby buildings on the rapid downward movement of the tracer gas plume. The atmospheric dilution factors which lead to the highest observed air concentrations were then applied to the releases of I{sup 123} and Xe{sup 123} from a potential accident scenario in order to assess the impact on nearby receptors. Even given the conservative assumptions about the release of I{sup 123}, the estimated radiation doses were at least an order of magnitude below the international standards for doses to member of the public. 27 refs., 8 tabs., 5 figs.

  4. Preliminary Assessment of the Loss of Flow Accident for PGSFR

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Andong; Choi, Yong Won; Bae, Moohoon [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

    2014-10-15

    TRACE code have being considered as a candidate tool for SFR audit calculation for licensing review since 2012. On the basis of modeling and precalculation experience for the Demonstration Sodium cooled Fast Reactor (DSFR-600), TRACE code model for PGSFR was developed this year. In this paper, one of representing Design Base Event (DBE), Loss of Flow (LOF) accident was pre-calculated and Locked Rotor (LR) case was compared with LOF case since it could be a possible limiting case for LOF representing DBE. Sensitivity calculation for the LR case was implemented for identifying major parameters for the scenario. For the preparation of the review of licensing application for PGSFR, TRACE model for the PGSFR was developed and the loss of flow accident was precalculated. The locked pump rotor case was also calculated as a possible bounding case for the loss of flow scenario. Pre-calculation showed that the locked rotor case was similar or worst case to the loss of flow accident. Therefore, the locked rotor case should take into account in design base accident assessment of PGSFR. Sensitivity calculations for the rocked rotor case also studied for identification of unfixed design parameters influencing to estimation of inner surface temperature. Sensitivity result showed that the first temperature peak was largely influenced by reactor trip delay and second peak mostly influenced by pump coast down characteristic.

  5. Risk assessment of severe accident-induced steam generator tube rupture

    International Nuclear Information System (INIS)

    1998-03-01

    This report describes the basis, results, and related risk implications of an analysis performed by an ad hoc working group of the U.S. Nuclear Regulatory Commission (NRC) to assess the containment bypass potential attributable to steam generator tube rupture (SGTR) induced by severe accident conditions. The SGTR Severe Accident Working Group, comprised of staff members from the NRC's Offices of Nuclear Reactor Regulation (NRR) and Nuclear Regulatory Research (RES), undertook the analysis beginning in December 1995 to support a proposed steam generator integrity rule. The work drew upon previous risk and thermal-hydraulic analyses of core damage sequences, with a focus on the Surry plant as a representative example. This analysis yielded new results, however, derived by predicting thermal-hydraulic conditions of selected severe accident scenarios using the SCDAP/RELAP5 computer code, flawed tube failure modeling, and tube failure probability estimates. These results, in terms of containment bypass probability, form the basis for the findings presented in this report. The representative calculation using Surry plant data indicates that some existing plants could be vulnerable to containment bypass resulting from tube failure during severe accidents. To specifically identify the population of plants that may pose a significant bypass risk would require more definitive analysis considering uncertainties in some assumptions and plant- and design-specific variables. 46 refs., 62 figs., 37 tabs

  6. Accident-generated radioactive particle source term development for consequence assessment of nuclear fuel cycle facilities

    International Nuclear Information System (INIS)

    Sutter, S.L.; Ballinger, M.Y.; Halverson, M.A.; Mishima, J.

    1983-04-01

    Consequences of nuclear fuel cycle facility accidents can be evaluated using aerosol release factors developed at Pacific Northwest Laboratory. These experimentally determined factors are compiled and consequence assessment methods are discussed. Release factors can be used to estimate the fraction of material initially made airborne by postulated accident scenarios. These release fractions in turn can be used in models to estimate downwind contamination levels as required for safety assessments of nuclear fuel cycle facilities. 20 references, 4 tables

  7. Risk assessment model for nuclear accident emergency protection countermeasure based on fuzzy matter-element analysis

    International Nuclear Information System (INIS)

    Xin Jing; Tang Huaqing; Zhang Yinghua; Zhang Limin

    2009-01-01

    A risk assessment model of nuclear accident emergency protection countermeasure based on fuzzy matter-element analysis and Euclid approach degree is proposed in the paper. The weight of assessed index is determined by information entropy and the scoring by experts, which could not only make full use of the inherent information of the indexes adequately, but reduce subjective assumption in the course of assessment effectively. The applied result shows that it is reasonable that the model is adopted to make risk assessment for nuclear accident emergency protective countermeasure,and it could be a kind of effective analytical method and decision making basis to choose the optimum protection countermeasure. (authors)

  8. Analysis of rail accident frequencies and severities for the assessment of radioactive material transport risk - Summary report

    International Nuclear Information System (INIS)

    Heywood, J.D.; Schwartz, G.; Fett, J.

    2001-01-01

    This shortened version of the final contractual report to the European Commission DGXVII summarises the work performed and the conclusions drawn from consideration, comparison and analysis of transport accident frequency and severity assessment methods for radioactive material transport by rail. This paper aims to provide an introduction to the study whose final report is 155 pages in length. The findings are based on a comprehensive review of transport risk assessment methods and related databases available to EU member states. The emphasis has been on the probabilistic accident severity and frequency assessment methodologies developed and used by the organisations involved in this EU-funded research project - AEA Technology and GRS. The results should be of major assistance in the understanding and development of standardised quantitative risk assessment models. Further work is suggested to underpin the development of a harmonised accident methodology including the collection of more detailed rail data and analysis on a year by year basis as well as further consideration of the assumptions made for fire accident scenarios. (author)

  9. Remediation strategies after nuclear or radiological accidents: part 2 - accident scenarios for assessing effectiveness of cleanup procedures

    International Nuclear Information System (INIS)

    Rochedo, Elaine R.R.

    2009-01-01

    The selection of protective measures and remediation strategies after an accident needs to be based on previously established criteria, to minimize unnecessary stress and the exposures involved in cleanup operations that are not effective in reducing doses to the public. In a first stage, a database describing the countermeasures has been developed including their efficiency on removing contamination from surfaces. However, to assess the effectiveness of cleanup procedures in reducing doses to members of the public, it was necessary to derive specific scenarios in order to simulate the long term behavior of the material in the environment, since the contribution of different surfaces to doses changes with time after contamination. A basic release and exposure scenario was developed to assess the dose reduction due to the mostly used procedures. Exposure scenarios were selected to fit the surroundings of the Brazilian nuclear power plants in Angra dos Reis. Simulations were performed using SIEM, the integrated system for dose assessment after contamination events, developed at IRD. The contamination of urban environments was assessed for Cs-137, as this was found to be the most relevant long term radionuclide to contribute to doses to member of the public. The effects on reducing external exposures were assessed for periods up to 50 years after the contamination. For agricultural areas, the focus was on ingestion doses from contamination with I-131 for periods up to 1 year after contamination. Results will be complemented on the database in order to support multi-criteria decision making processes after accidents. (author)

  10. Remediation strategies after nuclear or radiological accidents: part 2 - accident scenarios for assessing effectiveness of cleanup procedures

    Energy Technology Data Exchange (ETDEWEB)

    Rochedo, Elaine R.R. [Comissao Nacional de Energia Nuclear (CNEN-RJ), Rio de Janeiro, RJ (Brazil). Coordenacao de Instalacoes Nucleares], e-mail: erochedo@cnen.gov.br; Silva, Diogo N.G.; Wasserman, Maria A.V.; Conti, Luiz F.C. [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)], e-mail: dneves@ird.gov.br, e-mail: angelica@ird.gov.br, e-mail: lfcconti@ird.gov.br

    2009-07-01

    The selection of protective measures and remediation strategies after an accident needs to be based on previously established criteria, to minimize unnecessary stress and the exposures involved in cleanup operations that are not effective in reducing doses to the public. In a first stage, a database describing the countermeasures has been developed including their efficiency on removing contamination from surfaces. However, to assess the effectiveness of cleanup procedures in reducing doses to members of the public, it was necessary to derive specific scenarios in order to simulate the long term behavior of the material in the environment, since the contribution of different surfaces to doses changes with time after contamination. A basic release and exposure scenario was developed to assess the dose reduction due to the mostly used procedures. Exposure scenarios were selected to fit the surroundings of the Brazilian nuclear power plants in Angra dos Reis. Simulations were performed using SIEM, the integrated system for dose assessment after contamination events, developed at IRD. The contamination of urban environments was assessed for Cs-137, as this was found to be the most relevant long term radionuclide to contribute to doses to member of the public. The effects on reducing external exposures were assessed for periods up to 50 years after the contamination. For agricultural areas, the focus was on ingestion doses from contamination with I-131 for periods up to 1 year after contamination. Results will be complemented on the database in order to support multi-criteria decision making processes after accidents. (author)

  11. Independent assessment of MELCOR as a severe accident thermal-hydraulic/source term analysis tool

    International Nuclear Information System (INIS)

    Madni, I.K.; Eltawila, F.

    1994-01-01

    MELCOR is a fully integrated computer code that models all phases of the progression of severe accidents in light water reactor nuclear power plants, and is being developed for the US Nuclear Regulatory Commission (NRC) by Sandia National Laboratories (SNL). Brookhaven National Laboratory (BNL) has a program with the NRC called ''MELCOR Verification, Benchmarking, and Applications,'' whose aim is to provide independent assessment of MELCOR as a severe accident thermal-hydraulic/source term analysis tool. The scope of this program is to perform quality control verification on all released versions of MELCOR, to benchmark MELCOR against more mechanistic codes and experimental data from severe fuel damage tests, and to evaluate the ability of MELCOR to simulate long-term severe accident transients in commercial LWRs, by applying the code to model both BWRs and PWRs. Under this program, BNL provided input to the NRC-sponsored MELCOR Peer Review, and is currently contributing to the MELCOR Cooperative Assessment Program (MCAP). This paper presents a summary of MELCOR assessment efforts at BNL and their contribution to NRC goals with respect to MELCOR

  12. Towards more realistic assessment of reactor accident consequences

    International Nuclear Information System (INIS)

    Tveten, U.

    1985-07-01

    The purpose of the Nordic project described in the report has been to improve the data base used in accident consequence assessments, and also to improve the assessment models in use in the Nordic countries. The following data related questions have been dealt with: Terrestrial transfer factors, the freshwater pathways, comparison of dynamic and static calculation models for fish, and the shielding effect of buildings. The work on terrestrial transfer factors has resulted in the generation of a Nordic fallout data bank. The following experimental investigations have been performed: Natural decontamination of roofs under summer and winter conditions, deposition in urban areas, and the filter effect of buildings. Various aspects of mitigating actions have also been examined

  13. Progress in methodology for probabilistic assessment of accidents: timing of accident sequences

    International Nuclear Information System (INIS)

    Lanore, J.M.; Villeroux, C.; Bouscatie, F.; Maigret, N.

    1981-09-01

    There is an important problem for probabilistic studies of accident sequences using the current event tree techniques. Indeed this method does not take into account the dependence in time of the real accident scenarios, involving the random behaviour of the systems (lack or delay in intervention, partial failures, repair, operator actions ...) and the correlated evolution of the physical parameters. A powerful method to perform the probabilistic treatment of these complex sequences (dynamic evolution of systems and associated physics) is Monte-Carlo simulation, very rare events being treated with the help of suitable weighting and biasing techniques. As a practical example the accident sequences related to the loss of the residual heat removal system in a fast breeder reactor has been treated with that method

  14. Severe accident risks: An assessment for five US nuclear power plants: Appendices A, B, and C

    International Nuclear Information System (INIS)

    1990-12-01

    This report summarizes an assessment of the risks from severe accidents in five commercial nuclear power plants in the United States. These risks are measured in a number of ways, including: the estimated frequencies of core damage accidents from internally initiated accidents and externally initiated accidents for two or the plants; the performance of containment structures under severe accident loadings; the potential magnitude of radionuclide release and offsite consequences of such accidents; and the overall risk (the product of accident frequencies and consequences). Supporting this summary report are a large number of reports written under contract to NRC that provide the detailed discussion of the methods used and results obtained in these risk studies. Volume 2 of this report contains three appendices, providing greater detail on the methods used, an example risk calculation, and more detailed discussion of particular technical issues found important in the risk studies

  15. A Nordic approach to impact assessment of accidents with nuclear-propelled vessels

    International Nuclear Information System (INIS)

    Reistad, O.; Hustveit, S.; Palsson, S.E.; Hoe, S.; Lahtinen, J.

    2012-11-01

    The MareNuc project has identified the parameters in a graded approach to impact assessment for marine nuclear reactors. The graded approach is founded on the following elements: 1) More detailed understanding of previous accidents in nuclear-propelled vessels (initiating events, accident developments, release fractions), including release mechanisms (radionuclide retention in vessel construction); 2) Bench-marking of release scenarios using modelling tools applied in the Nordic countries, in addition to demonstration of generally accessible and free software developed by the IAEA; 3) Other systematic approaches to safety assessments of vessel port calls, and to the design and maintenance of emergency preparedness systems; More specifically, increased emphasis compared to earlier analysis after the Kursk accident is given to the engineered vessel barriers. Relevant standards from impact assessments for commercial nuclear power plants have been identified, such as from the NUREG series. The Nordic approaches to safety evaluation, impact assessments and emergency preparedness organisation was also reported as part of the project. The Canadian approach for international port calls was carefully reported and assessed as part of the project, and commended for its broad and comprehensive approach to reactor and vessel design for the nationalities involved, to the design and maintenance of emergency preparedness systems, and the well-structured and broad cooperation between civilian and military institutions. This approach goes beyond the current approach in the Nordic countries, also in the case of Norway, which experience regular port calls from allied nuclear navies. The overall result is a broader understanding in the Nordic countries for the importance of the various parameters for impact assessment of releases from marine reactors, and to the design and maintenance of an emergency preparedness organisation without detailed knowledge of the installation in question

  16. A Nordic approach to impact assessment of accidents with nuclear-propelled vessels

    Energy Technology Data Exchange (ETDEWEB)

    Reistad, O. [Institute for Energy Technology, Kjeller (Norway); Hustveit, S. [Norwegian Radiation Protection Authority, Oesteraes (Norway); Palsson, S.E. [Icelandic Radiation Safety Authority, Reykjavik (Iceland); Hoe, S. [Danish Emergency Management Agency, Birkeroed (Denmark); Lahtinen, J. [STUK, Helsinki (Finland)

    2012-11-15

    The MareNuc project has identified the parameters in a graded approach to impact assessment for marine nuclear reactors. The graded approach is founded on the following elements: 1) More detailed understanding of previous accidents in nuclear-propelled vessels (initiating events, accident developments, release fractions), including release mechanisms (radionuclide retention in vessel construction); 2) Bench-marking of release scenarios using modelling tools applied in the Nordic countries, in addition to demonstration of generally accessible and free software developed by the IAEA; 3) Other systematic approaches to safety assessments of vessel port calls, and to the design and maintenance of emergency preparedness systems; More specifically, increased emphasis compared to earlier analysis after the Kursk accident is given to the engineered vessel barriers. Relevant standards from impact assessments for commercial nuclear power plants have been identified, such as from the NUREG series. The Nordic approaches to safety evaluation, impact assessments and emergency preparedness organisation was also reported as part of the project. The Canadian approach for international port calls was carefully reported and assessed as part of the project, and commended for its broad and comprehensive approach to reactor and vessel design for the nationalities involved, to the design and maintenance of emergency preparedness systems, and the well-structured and broad cooperation between civilian and military institutions. This approach goes beyond the current approach in the Nordic countries, also in the case of Norway, which experience regular port calls from allied nuclear navies. The overall result is a broader understanding in the Nordic countries for the importance of the various parameters for impact assessment of releases from marine reactors, and to the design and maintenance of an emergency preparedness organisation without detailed knowledge of the installation in question

  17. Preliminary dose assessment of the Chernobyl accident

    International Nuclear Information System (INIS)

    Hull, A.P.

    1987-01-01

    From the major accident at Unit 4 of the Chernobyl nuclear power station, a plume of airborne radioactive fission products was initially carried northwesterly toward Poland, thence toward Scandinavia and into Central Europe. Reports of the levels of radioactivity in a variety of media and of external radiation levels were collected in the Department of Energy's Emergency Operations Center and compiled into a data bank. Portions of these and other data which were obtained directly from published and official reports were utilized to make a preliminary assessment of the extent and magnitude of the external dose to individuals downwind from Chernobyl. Radioactive 131 I was the predominant fission product. The time of arrival of the plume and the maximum concentrations of 131 I in air, vegetation and milk and the maximum reported depositions and external radiation levels have been tabulated country by country. A large amount of the total activity in the release was apparently carried to a significant elevation. The data suggest that in areas where rainfall occurred, deposition levels were from ten to one-hundred times those observed in nearby ''dry'' locations. Sufficient spectral data were obtained to establish average release fractions and to establish a reference spectra of the other nuclides in the release. Preliminary calculations indicated that the collective dose equivalent to the population in Scandinavia and Central Europe during the first year after the Chernobyl accident would be about 8 x 10 6 person-rem. From the Soviet report, it appears that a first year population dose of about 2 x 10 7 person-rem (2 x 10 5 Sv) will be received by the population who were downwind of Chernobyl within the U.S.S.R. during the accident and its subsequent releases over the following week. 32 refs., 14 figs., 20 tabs

  18. Research on risk assessment for maritime transport of radioactive materials. Preparation of maritime accident data for risk assessment

    International Nuclear Information System (INIS)

    Odano, Naoteru; Sawada, Ken-ichi; Mochiduki, Hiromitsu; Hirao, Yoshihiro; Asami, Mitsufumi

    2010-01-01

    Maritime transport of radioactive materials has been playing an important role in the nuclear fuel cycle in Japan. Due to recent increase of transported radioactive materials and diversification of transport packages with enlargement of nuclear research, development and utilization, safety securement for maritime transport of radioactive materials is one of important issues in the nuclear fuel cycle. Based squarely on the current circumstances, this paper summarizes discussion on importance of utilization of results of risk assessment for maritime transport of radioactive materials. A plan for development of comprehensive methodology to assess risks in maritime transport of radioactive materials is also described. Preparations of database of maritime accident to be necessary for risk assessment are also summarized. The prepared data could be utilized for future quantitative risk assessment, such as the event trees and fault trees analyses, for maritime transport of radioactive materials. The frequency of severe accident that the package might be damaged is also estimated using prepared data. (author)

  19. Assessment of Radiological and Economic Consequences of a Hypothetical Accident for ETRR-2, Egypt Utilizing COSYMA Code

    International Nuclear Information System (INIS)

    Tawfik, F.S.; Abdel-Aal, M.M.

    2008-01-01

    A comprehensive probabilistic study of an accident consequence assessment (ACA) for loss of coolant accident (LOCA) has accomplished to the second research reactor ETRR-2, located at Inshas Nuclear Research Center, Cairo, Egypt. PC-COSYMA, developed with the support of European Commission, has adopted to assess the radiological and economic consequences of a proposed accident. The consequences of the accident evaluated in case of early and late effects. The effective doses and doses in different organs carried out with and without countermeasures. The force mentioned calculations were required the following studies: the core inventory due to the hypothetical accident, the physical parameters of the source term, the hourly basis meteorological parameters for one complete year, and the population distribution around the plant. The hourly stability conditions and height of atmospheric boundary layers (ABL) of the concerned site were calculated. The results showed that, the nuclides that have short half-lives (few days) give the highest air and ground concentrations after the accident than the others. The area around the reactor requires the early and late countermeasures action after the accident especially in the downwind sectors. Economically, the costs of emergency plan are effectively high in case of applying countermeasures but countermeasures reduce the risk effects

  20. Assessment of potential doses to workers during postulated accident conditions at the Waste Isolation Pilot Plant

    International Nuclear Information System (INIS)

    Hoover, M.D.; Newton, G.J.; Farrell, R.F.

    1996-01-01

    This qualitative hazard evaluation systematically assessed potential doses to workers during postulated accident conditions at the U.S. Department of Energy's Waste Isolation Pilot Plant (WIPP). Postulated accidents included the spontaneous ignition of a waste drum, puncture of a waste drum by a forklift, dropping of a waste drum from a forklift, and simultaneous dropping of seven drums during a crane failure. The descriptions and estimated frequencies of occurrence for these accidents were developed by the Hazard and Operability Study for CH TRU Waste Handling System (WCAP 14312). The estimated materials at risk, damage ratios, airborne release fractions and respirable fractions for these accidents were taken from the 1995 Safety Analysis Report (SAR) update and from the DOE handbook Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities (DOE-HDBK-3010-94). A Monte Carlo simulation was used to estimate the range of worker exposures that could result from each accident. Guidelines for evaluating the adequacy of defense-in-depth for worker protection at WIPP were adopted from a scheme presented by the International Commission on Radiological Protection in its publication on Protection from Potential Exposure: A Conceptual Framework (ICRP Publication 64). Probabilities of exposures greater than 5, 50, and 300 rem were less than 10 -2 , 10 -4 , and 10 -6 per year, respectively. In conformance with the guidance of DOE standard 3009-94, Appendix A (draft), we emphasize that use of these evaluation guidelines is not intended to imply that these numbers constitute acceptable limits for worker exposure under accident conditions. However, in conjunction with the extensive safety assessment in the 1995 SAR update, these results indicate that the Carlsbad Area Office strategy for the assessment of hazards and accidents assures the protection of workers, as well as members of the public and the environment

  1. Transport accident frequency data, their sources and their application in risk assessment

    International Nuclear Information System (INIS)

    Appleton, P.R.

    1988-08-01

    Base transport accident frequency data and sources of these data are presented. Both generic information and rates specific to particular routes or packages are included. Strong packages, such as those containing significant quantities of radioactive materials, will survive most of the accidents represented by these base frequencies without a containment breach. The association of severity probability distributions with a base frequency, and package and contents response, leading to the quantification of release frequency and magnitude, are often more important in risk assessment than the base frequency itself. This paper therefore also includes brief comments on techniques adopted to utilize the base frequencies. This paper reports an accident frequency data survey undertaken at the end of 1986. It has not been updated to take account of work published between January 1987 and the Report publication date. (author)

  2. Assessment of two BWR accident management strategies

    International Nuclear Information System (INIS)

    Hodge, S.A.; Petek, M.

    1991-01-01

    A recently completed Oak Ridge effort proposes two management strategies for mitigation of the events that might occur in-vessel after the onset of significant core damage in a BWR severe accident. While the probability of such an accident is low, there may be effective yet inexpensive mitigation measures that could be implemented employing the existing plant equipment and requiring only additions to the plant emergency procedures. In this spirit, accident management strategies have been proposed for use of a borated solution for reactor vessel refill should control blade damage occur during a period of temporary core dryout and for containment flooding to maintain the core debris within the reactor vessel if injection systems cannot be restored. The proposed strategy for poisoning of the water used for vessel reflood should injection systems be restored after control blade damage has occurred has great promise, using only the existing plant equipment but employing a different chemical form for the boron poison. The dominant BWR severe accident sequence is Station Blackout and without means for mechanical stirring or heating of the storage tank, the question of being able to form the poisoned solution under accident conditions becomes of supreme importance. On the other hand, the proposed strategy for drywell flooding to cool the reactor vessel bottom head and prevent the core and structure debris from escaping to the drywell holds less promise. This strategy does, however, have potential for future plant designs in which passive methods might be employed to completely submerge the reactor vessel under severe accident conditions without the need for containment venting

  3. Radiological aspects of nuclear accident scenarios. Volume 2 the Rade-Aid system post-Chernobyl action

    International Nuclear Information System (INIS)

    Sinnaeve, J.

    1991-01-01

    In the event of a nuclear accident, there is a need for a rapid assessment of the resulting levels of environmental contamination in order to facilitate decisions on possible countermeasures. Volume 2 describes the RADE-AID project to develop a computer system which can be used to support the formulation of decisions on countermeasures following an accidental release of radionuclides. The system is intended as an aid following an actual accident and a tool for assistance in planning and training

  4. A route-specific system for risk assessment of radioactive materials transportation accidents

    International Nuclear Information System (INIS)

    Moore, J.E.; Sandquist, G.M.; Slaughter, D.M.

    1995-01-01

    A low-cost, powerful geographic information system (GIS) that operates on a personal computer was integrated into a software system to provide route specific assessment of the risks associated with the atmospheric release of radioactive and hazardous materials in transportation accidents. The highway transportation risk assessment (HITRA) software system described here combines a commercially available GIS (TransCAD) with appropriate models and data files for route- and accident-specific factors, such as meteorology, dispersion, demography, and health effects to permit detailed analysis of transportation risk assessment. The HITRA system allows a user to interactively select a highway or railroad route from a GIS database of major US transportation routes. A route-specific risk assessment is then performed to estimate downwind release concentrations and the resulting potential health effects imposed on the exposed population under local environmental and temporal conditions. The integration of GIS technology with current risk assessment methodology permits detailed analysis coupled with enhanced user interaction. Furthermore, HITRA provides flexibility and documentation for route planning, updating and improving the databases required for evaluating specific transportation routes, changing meteorological and environmental conditions, and local demographics

  5. The assessment of environmental consequences of nuclear reactor accidents

    International Nuclear Information System (INIS)

    Beattie, J.R.

    1981-01-01

    Thorough measures are taken throughout all stages of design, construction and operation of nuclear power reactors, and therefore no accident producing any significant environmental impact is likely to occur. Nevertheless as a precaution, such accidents have been the subject of intensive scientific predictive studies. After a historical review of theoretical papers on reactor accidents and their imagined environmental impacts and of those accidents that have indeed occurred, this paper gives an outline of fission products or other radioactive substances that may or may not be released by an accident, and of their possible effects after dispersion in the atmosphere. This general introduction is followed by sections describing what are sometimes called 'design basis accidents' for four of the main reactor types (magnox, AGR, PWR and CDFR), the precautions against these accidents and the probable degree of environmental impact likely. The paper concludes with a reference to those very low probability accidents which might have more serious environmental impacts, and proceeds from there to show that both the individual and community risks from such accidents are numerically moderate compared to other risks apparently accepted by society. A brief reflection on the relevance of numerical values and perceived risk concludes the paper. (author)

  6. Assessment of severe accident prevention and mitigation features: BWR, Mark II containment design

    International Nuclear Information System (INIS)

    Lehner, J.R.; Hsu, C.J.; Eltawila, F.; Perkins, K.R.; Luckas, W.J.; Fitzpatrick, R.G.; Pratt, W.T.

    1988-07-01

    Plant features and operator actions, which have been found to be important in either preventing or mitigating severe accidents in BWRs with Mark II containments (BWR Mark II's) have been identified. These features and actions were developed from insights derived from reviews of in-depth risk assessments performed specifically for the Limerick and Shoreham plants and from other relevant studies. Accident sequences that dominate the core-damage frequency and those accident sequences that are of potentially high consequence were identified. Vulnerabilities of the BWR Mark II to severe-accident containment loads were also noted. In addition, those features of a BWR Mark II, which are important for preventing core damage and are available for mitigating fission-product release to the environment were also identified. This report is issued to provide focus to an analyst examining an individual plant. This report calls attention to plant features and operator actions and provides a list of deterministic attributes for assessing those features and actions found to be helpful in reducing the overall risk for Mark II plants. Thus, the guidance is offered as a resource in examining the subject plant to determine if the same, or similar, plant features and operator actions will be of value in reducing overall plant risk. This report is intended to serve solely as guidance

  7. Research on consequence analysis method for probabilistic safety assessment of nuclear fuel facilities (5). Evaluation method and trial evaluation of criticality accident

    International Nuclear Information System (INIS)

    Yamane, Yuichi; Abe, Hitoshi; Nakajima, Ken; Hayashi, Yoshiaki; Arisawa, Jun; Hayami, Satoru

    2010-01-01

    A special committee of 'Research on the analysis methods for accident consequence of nuclear fuel facilities (NFFs)' was organized by the Atomic Energy Society of Japan (AESJ) under the entrustment of Japan Atomic Energy Agency (JAEA). The committee aims to research on the state-of-the-art consequence analysis method for the Probabilistic Safety Assessment (PSA) of NFFs, such as fuel reprocessing and fuel fabrication facilities. The objectives of this research are to obtain information useful for establishing quantitative performance objectives and to demonstrate risk-informed regulation through qualifying issues needed to be resolved for applying PSA to NFFs. The research activities of the committee were mainly focused on the consequence analysis method for postulated accidents with potentially large consequences in NFFs, e.g., events of criticality, spill of molten glass, hydrogen explosion, boiling of radioactive solution and fire (including the rapid decomposition of TBP complexes), resulting in the release of radioactive materials to the environment. The results of the research were summarized in a series of six reports, which consist of a review report and five technical ones. In this report, the evaluation methods of criticality accident, such as simplified methods, one-point reactor kinetics codes and quasi-static method, were investigated and their features were summarized to provide information useful for the safety evaluation of NFFs. In addition, several trial evaluations were performed for a hypothetical scenario of criticality accident using the investigated methods, and their results were compared. The release fraction of volatile fission products in a criticality accident was also investigated. (author)

  8. Rapid determination of strontium-89 and strontium-90

    International Nuclear Information System (INIS)

    Hellmuth, K.H.

    1987-05-01

    The main purpose of this study was to run experiments on rapid methods for radiostrontium determination. The aim was also to check the order of magnitude of radiostrontium directly available to plant uptake by roots. A brief inspection of the methods available showed that there is no ideal rapid method. Paying attention to interference from other nuclides, the 90 Sr content of a variety of substances, such as milk, grass and soil could be determined by a two step extraction method with tributyl phosphate. Despite the short waiting time needed for the necessary ingrowth of 90 Y, the first results were available soon after the accident. Comparison with the results obtained by the conventional nitrate separation method later showed the firs results to be fairly accurate. One of the important radionuclides, 89 Sr, could not be determined with the rapid methods used. It was evident from our results that the fallout from Chernobyl contained only a negligible amount of 90 Sr. The levels in soil, grass and milk indicated that the increase of 90 Sr as a result of the accident was within the limits of error of the measurements. The few air-filter samples analysed, however, could not be assessed because of interference from Ce isotopes. Another rapid separation method used for samples with a low Ca content, such as wet and dry deposition using the extraction of Sr as thenoyltrifluoracetylacetonate and subsequent liquid scintillation counting, was not successful under conditions of fresh fallout. Experiences after the reactor accident clearly show that there is a need to develop rapid methods for 89,90 Sr determination

  9. Assessment of clad integrity of PHWR fuel pin following a postulated severe accident

    International Nuclear Information System (INIS)

    Dutta, B.K.; Kushwaha, H.S.; Venkat Raj, V.

    2000-01-01

    A mechanistic fuel performance analysis code FAIR has been developed. The code can analyse fuel pins with free standing as well as collapsible clad under normal, off-normal and accident conditions of reactors. The code FAIR is capable of analysing the effects of high burnup on fuel behaviour. The code incorporates finite element based thermo-mechanical module for computing transient temperature distribution and thermal-elastic-plastic stresses in the fuel pin. A number of high temperature thermo-physical and thermo-mechanical models also have been incorporated for analysing fuel pins subjected to severe accident scenario. The present paper describes salient features of code FAIR and assessment of clad integrity of PHWR fuel pins with different initial burnup subjected to severe accident scenario. (author)

  10. Integrated framework for the external cost assessment of nuclear power plant accident considering risk aversion: The Korean case

    International Nuclear Information System (INIS)

    Lee, Sang Hun; Kang, Hyun Gook

    2016-01-01

    Recently, the estimation of accident costs within the social costs of nuclear power plants (NPPs) has garnered substantial interest. In particular, the risk aversion behavior of the public toward an NPP accident is considered an important factor when integrating risk aversion into NPP accident cost. In this study, an integrated framework for the external cost assessment of NPP accident that measures the value of statistical life (VSL) and the relative risk aversion (RRA) coefficient for NPP accident based on an individual-level survey is proposed. To derive the willingness to pay and the RRA coefficient for NPP accident risks, a survey was conducted on a sample of 1550 individuals in Korea. The estimation obtained a mean VSL of USD 2.78 million and an RRA coefficient of 1.315. Based on the estimation results in which various cost factors were considered, a multiplication factor of 5.16 and an external cost of NPP accidents of 4.39E−03 USD-cents/kW h were estimated. This study is expected to provide insight to energy policy decision-makers on analyzing the economic validity of NPP compared to other energy sources by reflecting the estimated external cost of NPP accident into the unit electricity generation cost of NPP. - Highlights: •External cost assessment framework for NPP is proposed considering risk aversion. •VSL was derived from WTP for mortality risk reduction from hypothetical NPP accident. •RRA was derived to integrate public risk aversion into external cost of NPP accident. •Individual-level survey was conducted to derive WTP and RRA for NPP accident risk. •The external cost was estimated considering the direct cost factors of NPP accident.

  11. Main results of assessing integrity of RNPP-3 steam generator heat exchange tubes in accident management

    International Nuclear Information System (INIS)

    Shugajlo, Al-j P.; Mustafin, M.A.; Shugajlo, Al-r P.; Ryzhov, D.I.; Zhabin, O.I.

    2017-01-01

    Tubes integrity evaluation under accident conditions considering drain of SG and current technical state of steam exchange tubes is an important question regarding SG long-term operation and improvement of accident management strategy.The main investigation results prepared for heat exchange surface of RNPP-3 steam generator are presented in this research aimed at assessing integrity of heat exchange tubes under accident conditions, which lead to full or partial drain of heat exchange surface, in particular during station blackout.

  12. Beyond designed functional margins in CANDU type NPP. Radioactive nuclei assessment in an LOCA type accident

    Directory of Open Access Journals (Sweden)

    Budu Andrei Razvan

    2015-01-01

    Full Text Available European Union's energy roadmap up to year 2050 states that in order to have an efficient and sustainable economy, with minimum or decreasing greenhouse gas emissions, along with use of renewable resources, each constituent state has the option for nuclear energy production as one desirable option. Every scenario considered for tackling climate change issues, along with security of supply positions the nuclear energy as a recommended option, an option that is highly competitive with respect to others. Nuclear energy, along with other renewable power sources are considered to be the main pillars in the energy sector for greenhouse gas emission mitigation at European level. European Union considers that nuclear energy must be treated as a highly recommended option since it can contribute to security of energy supply. Romania showed excellent track-records in operating in a safe and economically sound manner of Cernavoda NPP Units 1&2. Both Units are in top 10 worldwide in terms of capacity factor. Due to Romania's need to ensure the security of electricity supply, to meet the environmental targets and to move to low carbon generation technologies, Cernavoda Units 3&4 Project appears as a must. This Project was started in 2010 and it is expected to have the Units running by 2025. Cost effective and safety operation of a Nuclear Power Plant is made taking into consideration functional limits of its equipment. As common practice, every nuclear reactor type (technology used is tested according to the worse credible accident or equipment failure that can occur. For CANDU type reactor, this is a Loss of Cooling Accident (LOCA. In a LOCA type accident in a CANDU NPP, using RELAP/SCDAP code for fuel bundle damage assessment the radioactive nuclei are to be quantified. Recently, CANDU type NPP accidents are studied using the RELAP/SCDAP code only. The code formerly developed for PWR type reactors was adapted for the CANDU geometry and can assess the

  13. Assessment of work-related accidents associated with waste handling in Belo Horizonte (Brazil).

    Science.gov (United States)

    Mol, Marcos Pg; Pereira, Amanda F; Greco, Dirceu B; Cairncross, Sandy; Heller, Leo

    2017-10-01

    As more urban solid waste is generated, managing it becomes ever more challenging and the potential impacts on the environment and human health also become greater. Handling waste - including collection, treatment and final disposal - entails risks of work accidents. This article assesses the perception of waste management workers regarding work-related accidents in domestic and health service contexts in Belo Horizonte, Brazil. These perceptions are compared with national data from the Ministry of Social Security on accidents involving workers in solid waste management. A high proportion of accidents involves cuts and puncture injuries; 53.9% among workers exposed to domestic waste and 75% among those exposed to health service waste. Muscular lesions and fractures accounted for 25.7% and 12.5% of accidents, respectively. Data from the Ministry of Social Security diverge from the local survey results, presumably owing to under-reporting, which is frequent in this sector. Greater commitment is needed from managers and supervisory entities to ensure that effective measures are taken to protect workers' health and quality of life. Moreover, workers should defend their right to demand an accurate registry of accidents to complement monitoring performed by health professionals trained in risk identification. This would contribute to the improved recovery of injured workers and would require managers in waste management to prepare effective preventive action.

  14. Structure shielding from cloud and fallout gamma ray sources for assessing the consequences of reactor accidents

    International Nuclear Information System (INIS)

    Burson, Z.G.; Profio, A.E.

    1975-12-01

    Radiation shielding provided by transportation vehicles and structures typical of where people live and work were estimated for cloud and fallout gamma-ray sources resulting from a hypothetical reactor accident. Dose reduction factors are recommended for a variety of situations for realistically assessing the consequences of reactor accidents

  15. A methodology for analysing human errors of commission in accident scenarios for risk assessment

    International Nuclear Information System (INIS)

    Kim, J. H.; Jung, W. D.; Park, J. K

    2003-01-01

    As the concern on the impact of the operator's inappropriate interventions, so-called Errors Of Commissions(EOCs), on the plant safety has been raised, the interest in the identification and analysis of EOC events from the risk assessment perspective becomes increasing accordingly. To this purpose, we propose a new methodology for identifying and analysing human errors of commission that might be caused from the failures in situation assessment and decision making during accident progressions given an initiating event. The proposed methodology was applied to the accident scenarios of YGN 3 and 4 NPPs, which resulted in about 10 EOC situations that need careful attention

  16. Assessment of potential doses to workers during postulated accident conditions at the Waste Isolation Pilot Plant

    Energy Technology Data Exchange (ETDEWEB)

    Hoover, M.D.; Farrell, R.F. [DOE, Carlsbad, NM (United States); Newton, G.J.

    1995-12-01

    The recent 1995 WIPP Safety Analysis Report (SAR) Update provided detailed analyses of potential radiation doses to members of the public at the site boundary during postulated accident scenarios at the U.S. Department of Energy`s Waste Isolation Pilot Plant (WIPP). The SAR Update addressed the complete spectrum of potential accidents associated with handling and emplacing transuranic waste at WIPP, including damage to waste drums from fires, punctures, drops, and other disruptions. The report focused on the adequacy of the multiple layers of safety practice ({open_quotes}defense-in-depth{close_quotes}) at WIPP, which are designed to (1) reduce the likelihood of accidents and (2) limit the consequences of those accidents. The safeguards which contribute to defense-in-depth at WIPP include a substantial array of inherent design features, engineered controls, and administrative procedures. The SAR Update confirmed that the defense-in-depth at WIPP is adequate to assure the protection of the public and environment. As a supplement to the 1995 SAR Update, we have conducted additional analyses to confirm that these controls will also provide adequate protection to workers at the WIPP. The approaches and results of the worker dose assessment are summarized here. In conformance with the guidance of DOE Standard 3009-94, we emphasize that use of these evaluation guidelines is not intended to imply that these numbers constitute acceptable limits for worker exposures under accident conditions. However, in conjunction with the extensive safety assessment in the 1995 SAR Update, these results indicate that the Carlsbad Area Office strategy for the assessment of hazards and accidents assures the protection of workers, members of the public, and the environment.

  17. Accident progression event tree analysis for postulated severe accidents at N Reactor

    International Nuclear Information System (INIS)

    Wyss, G.D.; Camp, A.L.; Miller, L.A.; Dingman, S.E.; Kunsman, D.M.; Medford, G.T.

    1990-06-01

    A Level II/III probabilistic risk assessment (PRA) has been performed for N Reactor, a Department of Energy (DOE) production reactor located on the Hanford reservation in Washington. The accident progression analysis documented in this report determines how core damage accidents identified in the Level I PRA progress from fuel damage to confinement response and potential releases the environment. The objectives of the study are to generate accident progression data for the Level II/III PRA source term model and to identify changes that could improve plant response under accident conditions. The scope of the analysis is comprehensive, excluding only sabotage and operator errors of commission. State-of-the-art methodology is employed based largely on the methods developed by Sandia for the US Nuclear Regulatory Commission in support of the NUREG-1150 study. The accident progression model allows complex interactions and dependencies between systems to be explicitly considered. Latin Hypecube sampling was used to assess the phenomenological and systemic uncertainties associated with the primary and confinement system responses to the core damage accident. The results of the analysis show that the N Reactor confinement concept provides significant radiological protection for most of the accident progression pathways studied

  18. Role of the Federal Radiological Monitoring and Assessment Center (FRMAC) following a radiological accident

    International Nuclear Information System (INIS)

    Doyle, J.F. III.

    1986-01-01

    The Federal Radiological Emergency Response Plan (FRERP) calls for the Department of Energy to establish a Federal Radiological Monitoring and Assessment Center (FRMAC) immediately following a major radiological accident to coordinate all federal off-site monitoring efforts in support of the State and the Cognizant Federal Agency (CFA) for the facility or material involved in the accident. Some accidents are potentailly very complex and may require hundreds of radiation specialists to ensure immediate protection of the public and workers in the area, and to identify priorities for the Environmental Protection Agency (EPA) long-term efforts once the immediate protective actions have been carried out. The FRMAC provides a working environment with today's high technology tools (i.e., communication, computers, management procedures, etc.) to assure that the State and CFA decision makers have the best possible information in a timely manner on which to act. The FRMAC planners also recognize an underlying responsibility to continuously document such operations in order to provide the State, the CFA, and the EPA the technical information they will require for long term assessments. In addition, it is fully recognized that information collected and actions taken by the FRMAC will be subjected to the same scrutiny as other parts of the accident and the overall response

  19. A radiological accident consequence assessment system for Hong Kong

    International Nuclear Information System (INIS)

    Wong, M.C.; Lam, H.K.

    1993-01-01

    An account is given of the Hong Kong Radiological Accident Consequence Assessment System which would be used to assess the potential consequences of an emergency situation involving atmospheric release of radioactive material. The system has the capability to acquire real-time meteorological information from the Observatory's network of automatic stations, synoptic stations in the nearby region as well as forecast data from numerical prediction models. The system makes use of these data to simulate the transport and dispersion of the released radioactive material. The effectiveness of protective action on the local population is also modeled. The system serves as a powerful aid in the protective action recommendation processes

  20. Improving Accident Tolerance of Nuclear Fuel with Coated Mo-alloy Cladding

    OpenAIRE

    Bo Cheng; Young-Jin Kim; Peter Chou

    2016-01-01

    In severe loss of coolant accidents (LOCA), similar to those experienced at Fukushima Daiichi and Three Mile Island Unit 1, the zirconium alloy fuel cladding materials are rapidly heated due to nuclear decay heating and rapid exothermic oxidation of zirconium with steam. This heating causes the cladding to rapidly react with steam, lose strength, burst or collapse, and generate large quantities of hydrogen gas. Although maintaining core cooling remains the highest priority in accident managem...

  1. Experience with COSYMA in an international intercomparison of probabilistic accident consequence assessment codes

    International Nuclear Information System (INIS)

    Hasemann, I.; Jones, J.A.; Steen, J. van der; Wonderen, E. van

    1996-01-01

    The Commission of the European Communities and the Nuclear Energy Agency of the OECD have organized an international exercise to compare the predictions of accident consequence assessment codes, and to identify those features of the models which lead to differences in the predicted results. Alongside this, a further exercise was undertaken in which the COSYMA code was used independently by several different organizations. Some of the findings of the COSYMA users' exercise are described that have general applications to accident consequence assessments. A number of areas are identified in which further work on accident consequence models may be justified. These areas, which are also of interest for codes other than COSYMA, are (a) the calculation and averaging of doses and risks to people sheltered in different types of buildings, particularly with respect to the evaluation of early health effects; (b) the modeling of long-duration releases and their description as a series of shorter releases; (c) meteorological sampling for results at a certain location, specifically for use with trajectory models of atmospheric dispersion; and (d) aspects of calculating probabilities of consequences at a point

  2. Use of bayesian operations for diagnosing accidents

    International Nuclear Information System (INIS)

    Kang, K.M.; Jae, M.; Suh, K.Y.

    2005-01-01

    In complex systems, it is necessary to model a logical representation of the overall system interaction with respect to the individual subsystems. Operators are allowed to follow EOPs (Emergency Operating Procedures) when reactor tripped because of accidents. But, it's very difficult to diagnose accidents and find out appropriate procedures to mitigate current accidents in a given short time. Even if they diagnose accidents, it also has possibility to misdiagnose. TMI accident is a good example of operators' errors. Methodology using Influence Diagrams has been developed and applied for representing the dependency behaviors and uncertain behaviors of complex systems. An example to diagnose the accidents such as SLOCA and SGTR with similar symptoms has been introduced. From the constructed model, operators could diagnose accidents at any states of accidents. This model can offer the information about accidents with given symptoms. This model might help operators to diagnose correctly and rapidly. It might be very useful to support operators to reduce human error. Also, from this study, it is applicable to diagnose other accidents with similar symptoms and to analyze causes of reactor trip. (authors)

  3. The cost of nuclear accidents

    International Nuclear Information System (INIS)

    2015-01-01

    Proposed by a technical section of the SFEN, and based on a meeting with representatives of different organisations (OECD-NEA, IRSN, EDF, and European Nuclear Energy Forum), this publication addresses the economic consequences of a severe accident (level 6 or 7) within an electricity producing nuclear power plant. Such an assessment essentially relies on three pillars: release of radio-elements outside the reactor, the scenario of induced consequences, and the method of economic quantification. After a recall and a comment of safety arrangements, and of the generally admitted probability of such an accident, this document notices that several actors are concerned by nuclear energy and are trying to assess accident costs. The issue of how to assess a cost (or costs) of a nuclear accident is discussed: there are in fact several types of costs and consequences. Thus, some costs can be rather precisely quantified when some others can be difficult to assess or with uncertainty. The relevance of some cost categories appears to be a matter of discussion and one must not forget that consequences can occur on a long term. The need for methodological advances is outlined and three categories of technical objectives are identified for the assessment (efficiency of safety measures to be put forward to mitigate the risk via a better accident management, compensation of victims and nuclear civil responsibility, and comparison of electricity production sectors and assessment of externalisation to guide public choices). It is outlined that the impact of accidents depend on several factors, that the most efficient mean to limit consequences of accidents is of course to limit radioactive emissions

  4. Structural assessment of TAPS core shroud under accident loads

    International Nuclear Information System (INIS)

    Bhasin, Vivek; Kushwaha, H.S.; Mahajan, S.C.; Kakodkar, A.

    1996-09-01

    Over the last few years, the Core Shroud of Boiling Water Reactors (BWRs) operating in foreign countries, have developed cracks at weld locations. As a first step for assessment of structural safety of Tarapur Atomic Power Station (TAPS) core shroud, its detailed stress analysis was done for postulated accident loads. This report is concerned with structural assessment of core shroud, of BWR at TAPS, subjected to loads resulting from main steam line break (MSLB), recirculation line break (RLB) and safe shut down earthquake. The stress analysis was done for core shroud in healthy condition and without any crack since, visual examination conducted till now, do not indicate presence of any flaw. Dynamic structural analysis for MSLB and RLB events was done using dynamic load factor (DLF) method. The complete core shroud and its associated components were modelled and analysed using 3D plate/shell elements. Since, the components of core shroud are submerged in water, hence, hydrodynamic added mass was also considered for evaluation of natural frequencies. It was concluded that from structural point of view, adequate safety margin is available under all the accident loads. Nonlinear analysis was done to evaluate buckling/collapse load. The collapse/buckling load have sufficient margin against the allowable limits. The displacements are low hence, the insertion of control rod may not be affected. (author)

  5. A validation study of the intertran model for assessing risks of transportation accidents: Road transport of uranium hexafluoride

    International Nuclear Information System (INIS)

    Tomachevsky, E.G.; Ringot, C.; Pages, P.; Hubert, P.

    1985-06-01

    The INTERTRAN code was developed by the IAEA in order to provide member states with a simple and rapide method of assessing the risk involved in the transportation of radioactive materials and one which was applicable on a worldwide scale. Before being used, this code must be validated and the CEA thus compared the results obtained with the conventional risk assessment methods used by the CEPN with those derived from INTERTRAN. This paper gives the results of the studies made on the subject of road transportation of uranium hexafluoride in France. The conventional accident risk assessment method gave a figure of 8.84 x 10 -4 deaths/year, whereas INTERTRAN announces 1.78 x 10 -2 . To these figures should be added 3.38 x 10 -2 deaths/year, which is the intrinsic road risk, whatever the goods carried. In relation to conventional estimates, the INTERTRAN forecasts are five times lower for the U risk and twenty times higher for the HF risk. The chemical risk is indeed the most prevalent one in this case. Other comparisons are needed to validate this code

  6. CEC workshop on methods for assessing the offsite radiological consequences of nuclear accidents

    International Nuclear Information System (INIS)

    Luykx, F.; Sinnaeve, J.

    1986-01-01

    On Apr 15-19, 1985, in Luxembourg, the Commission of the European Communities (CEC), in collaboration with the Kernforschungszentrum Karlsruhe (KfK), Federal Republic of Germany, and the National Radiological Protection Board (NRPB), United Kingdom, presented a workshop on methods for assessing the offsite radiological consequences of nuclear accidents. The program consisted of eight sessions. The main conclusions, which were presented in the Round Table Session by the individual Session Chairmen, are summarized. Session topics are as follows: Session I: international developments in the field of accident consequence assessment (ACA); Session II: atmospheric dispersion; Session III: food chain models; Session IV: urban contamination; Session V: demographic and land use data; Session VI: dosimetry, health effects, economic and counter measure models; Session VII: uncertainty analysis; and Session VIII: application of probabilistic consequence models as decision aids

  7. Accident management information needs

    International Nuclear Information System (INIS)

    Hanson, D.J.; Ward, L.W.; Nelson, W.R.; Meyer, O.R.

    1990-04-01

    In support of the US Nuclear Regulatory Commission (NRC) Accident Management Research Program, a methodology has been developed for identifying the plant information needs necessary for personnel involved in the management of an accident to diagnose that an accident is in progress, select and implement strategies to prevent or mitigate the accident, and monitor the effectiveness of these strategies. This report describes the methodology and presents an application of this methodology to a Pressurized Water Reactor (PWR) with a large dry containment. A risk-important severe accident sequence for a PWR is used to examine the capability of the existing measurements to supply the necessary information. The method includes an assessment of the effects of the sequence on the measurement availability including the effects of environmental conditions. The information needs and capabilities identified using this approach are also intended to form the basis for more comprehensive information needs assessment performed during the analyses and development of specific strategies for use in accident management prevention and mitigation. 3 refs., 16 figs., 7 tabs

  8. Accident management information needs

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, D.J.; Ward, L.W.; Nelson, W.R.; Meyer, O.R. (EG and G Idaho, Inc., Idaho Falls, ID (USA))

    1990-04-01

    In support of the US Nuclear Regulatory Commission (NRC) Accident Management Research Program, a methodology has been developed for identifying the plant information needs necessary for personnel involved in the management of an accident to diagnose that an accident is in progress, select and implement strategies to prevent or mitigate the accident, and monitor the effectiveness of these strategies. This report describes the methodology and presents an application of this methodology to a Pressurized Water Reactor (PWR) with a large dry containment. A risk-important severe accident sequence for a PWR is used to examine the capability of the existing measurements to supply the necessary information. The method includes an assessment of the effects of the sequence on the measurement availability including the effects of environmental conditions. The information needs and capabilities identified using this approach are also intended to form the basis for more comprehensive information needs assessment performed during the analyses and development of specific strategies for use in accident management prevention and mitigation. 3 refs., 16 figs., 7 tabs.

  9. Forest Landscape Assessment Tool (FLAT): rapid assessment for land management

    Science.gov (United States)

    Lisa Ciecko; David Kimmett; Jesse Saunders; Rachael Katz; Kathleen L. Wolf; Oliver Bazinet; Jeffrey Richardson; Weston Brinkley; Dale J. Blahna

    2016-01-01

    The Forest Landscape Assessment Tool (FLAT) is a set of procedures and tools used to rapidly determine forest ecological conditions and potential threats. FLAT enables planners and managers to understand baseline conditions, determine and prioritize restoration needs across a landscape system, and conduct ongoing monitoring to achieve land management goals. The rapid...

  10. SNR-300 steam generator accident philosophy - Assessment due to new understandings in Na/H20-reactions

    International Nuclear Information System (INIS)

    Ruloff, G.; Huebner, R.

    1990-01-01

    Recent R+D results in the intermediate leak range (finally confirmed by the PFR steam generator accident) lead to a new assessment for the SNR-300 steam generator accident. This paper discusses the course of such accident which has to be expected under the SNR-300 conditions, starting with an unblocked micro leak and ending with the pressure loads on the secondary system due to overheating failure. Also, enclosed are the possibilities for a leak detection before serious damage has occurred and the discussion of the definition of the DBA. (author). 2 refs, 9 figs

  11. Homocysteine and cerebrovascular accidents.

    Science.gov (United States)

    Datta, Saikat; Pal, Salil K; Mazumdar, Hirak; Bhandari, Biswanath; Bhattacherjee, Sharmistha; Pandit, Sudipta

    2009-06-01

    Hyperhomocysteinaemia is rapidly emerging as an important risk factor for coronary artery disease, possibly because of its propensity to accelerate atherosclerosis. Whether it is also a risk factor for cerebrovascular accidents (CVA) is a matter of debate till now, as there are conflicting results of the various prospective studies. The present study was performed to correlate the levels of plasma homocysteine levels with that of ischaemic and haemorrhagic CVA. Forty-two cases of CVA were randomly selected over a period of one year, and their risk factors were assessed. It was observed that serum homocysteine levels were significantly raised in those with intracerebral infarcts when compared to those with intracerebral haemorrhage, although homocysteine levels didn't prove to be prognostically significant.

  12. HEALTH - module for assessment of stochastic health effects after nuclear accidents

    International Nuclear Information System (INIS)

    Raicevic, J.J.; Gajic, M.; Popovic, Z.

    2003-01-01

    In this paper the program module HEALTH for assessment of stochastic health effects in the case of nuclear accidents is presented. Program module HEALTH is a part of the new European real-time computer system RODOS for nuclear emergency and preparedness. Some of the key features of module HEALTH are presented, and some possible further improvements are discussed (author)

  13. Probabilistic Assessment of Severe Accident Consequence in West Bangka

    Science.gov (United States)

    Sunarko; Su'ud, Zaki

    2017-07-01

    Probabilistic dose assessment for severe accident condition is performed for West Bangka area. Source-term from WASH-1400 reactor analysis is used as a conservative release scenario for 1000 MWe PWR. Seven groups of isotopes are used in the simulation based on core inventory and release fraction. Population distribution for Muntok district and the area within a 100 km radius is obtained from 2014 data. Meteorological data is provided through cyclic sampling from a database containing two-year site-specific hourly records in 2014-2015 periods. PC-COSYMA segmented plume dispersion code is used to investigate the assumed the consequence of the accident scenario. The result indicates that early or deterministic effect is important for areas close the release point while long-term or stochastic effect is related to population distribution and covers area of up to 100 km from the release point. The mean annual expected values for early mortality and late mortality for the population within 100 km radius from Muntok site are 2.38×10-4 yr -1 and 1.33×10-3 yr -1 respectively.

  14. HIV surveillance in needlestick accidents with health workers - doi: 10.5020/18061230.2010.p325

    Directory of Open Access Journals (Sweden)

    Janete Lane Amadei

    2012-01-01

    Full Text Available Objective: To characterize the occurrence of needlestick accidents with health professionals submitted to rapid HIV tests. Methods: A descriptive, epidemiological study, carried out by notification of the occurrence of needlestick accidents in the Epidemiology Sector of the State Health Secretariat, in 2008. The following variables were assessed: gender, age, exposed biological material, type of exposure, source patient, and injured patient, progression of the case, accident situation, and use of personal protective equipment (PPE, 180 days serology and occupational area. Results: There have been reports of 143 accidents, prevailing in nursing, female, 20 to 30 years, involving the blood and biological material by percutaneous puncture. We found no standardization in the use of PPE. The HIV test revealed no positive cases. Conclusion: This study helped to characterize the occurrence of accidents reported in health care professionals and evaluate the protocol of care given. It also revealed non-contamination by HIV.

  15. Probabilistic risk assessment for the Los Alamos Meson Physics Facility worst-case design-basis accident

    International Nuclear Information System (INIS)

    Sharirli, M.; Butner, J.M.; Rand, J.L.; Macek, R.J.; McKinney, S.J.; Roush, M.L.

    1992-01-01

    This paper presents results from a Los Alamos National Laboratory Engineering and Safety Analysis Group assessment of the worse-case design-basis accident associated with the Clinton P. Anderson Meson Physics Facility (LAMPF)/Weapons Neutron Research (WNR) Facility. The primary goal of the analysis was to quantify the accident sequences that result in personnel radiation exposure in the WNR Experimental Hall following the worst-case design-basis accident, a complete spill of the LAMPF accelerator 1L beam. This study also provides information regarding the roles of hardware systems and operators in these sequences, and insights regarding the areas where improvements can increase facility-operation safety. Results also include confidence ranges to incorporate combined effects of uncertainties in probability estimates and importance measures to determine how variations in individual events affect the frequencies in accident sequences

  16. RASCAL [Radiological Assessment System for Consequence AnaLysis]: A screening model for estimating doses from radiological accidents

    International Nuclear Information System (INIS)

    Sjoreen, A.L.; Athey, G.F.; Sakenas, C.A.; McKenna, T.J.

    1988-01-01

    The Radiological Assessment System for Consequence AnaLysis (RASCAL) is a new MS-DOS-based dose assessment model which has been written for the US Nuclear Regulatory Commission for use during response to radiological emergencies. RASCAL is designed to provide crude estimates of the effects of an accident while the accident is in progress and only limited information is available. It has been designed to be very simple to use and to run quickly. RASCAL is unique in that it estimates the source term based on fundamental plant conditions and does not rely solely on release rate estimation (e.g., Ci/sec of I-131). Therefore, it can estimate consequences of accidents involving unmonitored pathways or projected failures. RASCAL will replace the older model, IRDAM. 6 refs

  17. Estimation of cost per severe accident for improvement of accident protection and consequence mitigation strategies

    International Nuclear Information System (INIS)

    Silva, Kampanart; Ishiwatari, Yuki; Takahara, Shogo

    2013-01-01

    To assess the complex situations regarding the severe accidents such as what observed in Fukushima Accident, not only radiation protection aspects but also relevant aspects: health, environmental, economic and societal aspects; must be all included into the consequence assessment. In this study, the authors introduce the “cost per severe accident” as an index to analyze the consequences of severe accidents comprehensively. The cost per severe accident consists of various costs and consequences converted into monetary values. For the purpose of improvement of the accident protection and consequence mitigation strategies, the costs needed to introduce the protective actions, and health and psychological consequences are included in the present study. The evaluations of these costs and consequences were made based on the systematic consequence analysis using level 2 and 3 probabilistic safety assessment (PSA) codes. The accident sequences used in this analysis were taken from the results of level 2 seismic PSA of a virtual 1,100 MWe BWR-5. The doses to the public and the number of people affected were calculated using the level 3 PSA code OSCAAR of Japan Atomic Energy Agency (JAEA). The calculations have been made for 248 meteorological sequences, and the outputs are given as expectation values for various meteorological conditions. Using these outputs, the cost per severe accident is calculated based on the open documents on the Fukushima Accident regarding the cost of protective actions and compensations for psychological harms. Finally, optimized accident protection and consequence mitigation strategies are recommended taking into account the various aspects comprehensively using the cost per severe accident. The authors must emphasize that the aim is not to estimate the accident cost itself but to extend the scope of “risk-informed decision making” for continuous safety improvements of nuclear energy. (author)

  18. Public acceptance and assessment of countermeasures after the Chernobyl accident

    International Nuclear Information System (INIS)

    Komarov, E.I.; Archangelskaya, G.V.; Zykova, I.A.

    1997-01-01

    General Background. Previous studies confirmed that the main reason of the psychological stress after Chernobyl was a worry about radiation influence on personal health and health of children. This ''Chernobyl stress'' is typical ''information'' or emotional stress resulting from mass media information on radioactive contamination and exposure but not from direct personal visual or auditory and other impression for 5 million population. The population was not able to define the radiation danger by direct sensual perception without measuring equipment but was obliged to change their life-style and diet as a remedial action and to follow the radiation protection requirements and advices. Therefore the anxiety was related not only to information about the accident but also to implemental countermeasures, which changed the everyday life. The countermeasures became the first real sign of the accident. Methods. In 1988-1994 studies based on population interview of about 5 thousand residents and questionnaires were carried out on contaminated (15 - 40 Ci/km2) territories, adjacent and distant areas. The following information was used: population knowledge of protective measures; sources of information about radiation and level of trust; assessment of the effectiveness and reasons of non-satisfaction of the protection measures; compliance and involvement of population in countermeasures including effects of life-style changes and behavior; public opinion on priority for financial expenditure for mitigation of accident consequences

  19. Rapid Radiochemical Analyses in Support of Fukushima Nuclear Accident - 13196

    Energy Technology Data Exchange (ETDEWEB)

    Maxwell, Sherrod L.; Culligan, Brian K.; Hutchison, Jay B. [Savannah River National Laboratory, Building 735-B, Aiken, SC 29808 (United States)

    2013-07-01

    There is an increasing need to develop faster analytical methods for emergency response, including emergency soil and air filter samples [1, 2]. The Savannah River National Laboratory (SRNL) performed analyses on samples received from Japan in April, 2011 as part of a U.S. Department of Energy effort to provide assistance to the government of Japan, following the nuclear event at Fukushima Daiichi, resulting from the earthquake and tsunami on March 11, 2011. Of particular concern was whether it was safe to plant rice in certain areas (prefectures) near Fukushima. The primary objectives of the sample collection, sample analysis, and data assessment teams were to evaluate personnel exposure hazards, identify the nuclear power plant radiological source term and plume deposition, and assist the government of Japan in assessing any environmental and agricultural impacts associated with the nuclear event. SRNL analyzed approximately 250 samples and reported approximately 500 analytical method determinations. Samples included soil from farmland surrounding the Fukushima reactors and air monitoring samples of national interest, including those collected at the U.S. Embassy and American military bases. Samples were analyzed for a wide range of radionuclides, including strontium-89, strontium-90, gamma-emitting radionuclides, and plutonium, uranium, americium and curium isotopes. Technical aspects of the rapid soil and air filter analyses will be described. The extent of radiostrontium contamination was a significant concern. For {sup 89,90}Sr analyses on soil samples, a rapid fusion technique using 1.5 gram soil aliquots to enable a Minimum Detectable Activity (MDA) of <1 pCi {sup 89,90}Sr /g of soil was employed. This sequential technique has been published recently by this laboratory for actinides and radiostrontium in soil and vegetation [3, 4]. It consists of a rapid sodium hydroxide fusion, pre-concentration steps using iron hydroxide and calcium fluoride

  20. Wyoming Basin Rapid Ecoregional Assessment

    Science.gov (United States)

    Carr, Natasha B.; Melcher, Cynthia P.

    2015-08-28

    The Wyoming Basin Rapid Ecoregional Assessment was conducted in partnership with the Bureau of Land Management (BLM). The overall goals of the BLM Rapid Ecoregional Assessments (REAs) are to identify important ecosystems and wildlife habitats at broad spatial scales; identify where these resources are at risk from Change Agents, including development, wildfire, invasive species, disease and climate change; quantify cumulative effects of anthropogenic stressors; and assess current levels of risk to ecological resources across a range of spatial scales and jurisdictional boundaries by assessing all lands within an ecoregion. There are several components of the REAs. Management Questions, developed by the BLM and stakeholders for the ecoregion, identify the regionally significant information needed for addressing land-management responsibilities. Conservation Elements represent regionally significant species and ecological communities that are of management concern. Change Agents that currently affect or are likely to affect the condition of species and communities in the future are identified and assessed. REAs also identify areas that have high conservation potential that are referred to as “large intact areas.” At the ecoregion level, the ecological value of large intact areas is based on the assumption that because these areas have not been greatly altered by human activities (such as development), they are more likely to contain a variety of plant and animal communities and to be resilient and resistant to changes resulting from natural disturbances such as fire, insect outbreaks, and disease.

  1. Detection device for off-gas system accidents

    International Nuclear Information System (INIS)

    Kubota, Ryuji; Tsuruoka, Ryozo; Yamanari, Shozo.

    1984-01-01

    Purpose: To rapidly isolate the off-gas system by detecting the off-gas system failure accident in a short time. Constitution: Radiation monitors are disposed to ducts connecting an exhaust gas area and an air conditioning system as a portion of a turbine building. The ducts are disposed independently such that they ventilate only the atmosphere in the exhaust gas area and do not mix the atmosphere in the turbine building. Since radioactivity issued upon off-gas accidents to the exhaust gas area is sucked to the duct, it can be detected by radiation detection monitors in a short time after the accident. Further, since the operator judges it as the off-gas system accident, the off-gas system can be isolated in a short time after the accident. (Moriyama, K.)

  2. Research on water hammer forces caused by rapid growth of bubbles at severe accidents of water cooled reactors

    International Nuclear Information System (INIS)

    Inasaka, Fujio; Adachi, Masaki; Aya, Izuo

    2004-01-01

    At severe accidents of Water Cooled Reactors a great deal of gas is expected to be produced in a short time within the water of lower part of nuclear pressure vessel and containment vessel caused by hydrogen production with a metal water reaction and steam explosions with direct contact of melting core and water. Water hammer forces caused by rapid growth of bubbles shall work on the wall of containment vessel and affect its integrity. Coherency of water block movement is not clear, whether simultaneous or in the same direction. Water block behavior and water hammer forces caused by rapid growth of bubbles have been tested using a modified scale model and analyzed to obtain experimental correlated equation to estimate water block's rising distance and velocity from water hammer data. Numerical analysis using RELAP5-3D (Reactor Excursion and Leak Analysis Program) has been conducted to evaluate water hammer forces and makes clear its modifications needed. (T. Tanaka)

  3. A framework for the assessment of severe accident management strategies

    International Nuclear Information System (INIS)

    Kastenberg, W.E.; Apostolakis, G.; Dhir, V.K.

    1993-09-01

    Severe accident management can be defined as the use of existing and/or altemative resources, systems and actors to prevent or mitigate a core-melt accident. For each accident sequence and each combination of severe accident management strategies, there may be several options available to the operator, and each involves phenomenological and operational considerations regarding uncertainty. Operational uncertainties include operator, system and instrumentation behavior during an accident. A framework based on decision trees and influence diagrams has been developed which incorporates such criteria as feasibility, effectiveness, and adverse effects, for evaluating potential severe accident management strategies. The framework is also capable of propagating both data and model uncertainty. It is applied to several potential strategies including PWR cavity flooding, BWR drywell flooding, PWR depressurization and PWR feed and bleed

  4. A framework for the assessment of severe accident management strategies

    Energy Technology Data Exchange (ETDEWEB)

    Kastenberg, W.E. [ed.; Apostolakis, G.; Dhir, V.K. [California Univ., Los Angeles, CA (United States). Dept. of Mechanical, Aerospace and Nuclear Engineering] [and others

    1993-09-01

    Severe accident management can be defined as the use of existing and/or altemative resources, systems and actors to prevent or mitigate a core-melt accident. For each accident sequence and each combination of severe accident management strategies, there may be several options available to the operator, and each involves phenomenological and operational considerations regarding uncertainty. Operational uncertainties include operator, system and instrumentation behavior during an accident. A framework based on decision trees and influence diagrams has been developed which incorporates such criteria as feasibility, effectiveness, and adverse effects, for evaluating potential severe accident management strategies. The framework is also capable of propagating both data and model uncertainty. It is applied to several potential strategies including PWR cavity flooding, BWR drywell flooding, PWR depressurization and PWR feed and bleed.

  5. A Time Series Model for Assessing the Trend and Forecasting the Road Traffic Accident Mortality.

    Science.gov (United States)

    Yousefzadeh-Chabok, Shahrokh; Ranjbar-Taklimie, Fatemeh; Malekpouri, Reza; Razzaghi, Alireza

    2016-09-01

    Road traffic accident (RTA) is one of the main causes of trauma and known as a growing public health concern worldwide, especially in developing countries. Assessing the trend of fatalities in the past years and forecasting it enables us to make the appropriate planning for prevention and control. This study aimed to assess the trend of RTAs and forecast it in the next years by using time series modeling. In this historical analytical study, the RTA mortalities in Zanjan Province, Iran, were evaluated during 2007 - 2013. The time series analyses including Box-Jenkins models were used to assess the trend of accident fatalities in previous years and forecast it for the next 4 years. The mean age of the victims was 37.22 years (SD = 20.01). From a total of 2571 deaths, 77.5% (n = 1992) were males and 22.5% (n = 579) were females. The study models showed a descending trend of fatalities in the study years. The SARIMA (1, 1, 3) (0, 1, 0) 12 model was recognized as a best fit model in forecasting the trend of fatalities. Forecasting model also showed a descending trend of traffic accident mortalities in the next 4 years. There was a decreasing trend in the study and the future years. It seems that implementation of some interventions in the recent decade has had a positive effect on the decline of RTA fatalities. Nevertheless, there is still a need to pay more attention in order to prevent the occurrence and the mortalities related to traffic accidents.

  6. Identification and initial assessment of candidate BWR late-phase in-vessel accident management strategies

    International Nuclear Information System (INIS)

    Hodge, S.A.

    1991-01-01

    Work sponsored by the United States Nuclear Regulatory Commission (USNRC) to identify and perform preliminary assessments of candidate BWR [boiling water reactor] in-vessel accident management strategies was completed at Oak Ridge National Laboratory (ORNL) during fiscal year 1990. Mitigative strategies for containment events have been the subject of a companion study at Brookhaven National Laboratory. The focus of this Oak Ridge effort was the development of new strategies for mitigation of the late phase events, that is, the events that would occur in-vessel after the onset of significant core damage. The work began with an investigation of the current status of BWR in-vessel accident management procedures and proceeded through a preliminary evaluation of several candidate new strategies. The steps leading to the identification of the candidate strategies are described. The four new candidate late-phase (in-vessel) accident mitigation strategies identified by this study and discussed in the report are: (1) keep the reactor vessel depressurized; (2) restore injection in a controlled manner; (3) inject boron if control blade damage has occurred; and (4) containment flooding to maintain core and structural debris in-vessel. Additional assessments of these strategies are proposed

  7. Traffic accidents involving fatigue driving and their extent of casualties.

    Science.gov (United States)

    Zhang, Guangnan; Yau, Kelvin K W; Zhang, Xun; Li, Yanyan

    2016-02-01

    The rapid progress of motorization has increased the number of traffic-related casualties. Although fatigue driving is a major cause of traffic accidents, the public remains not rather aware of its potential harmfulness. Fatigue driving has been termed as a "silent killer." Thus, a thorough study of traffic accidents and the risk factors associated with fatigue-related casualties is of utmost importance. In this study, we analyze traffic accident data for the period 2006-2010 in Guangdong Province, China. The study data were extracted from the traffic accident database of China's Public Security Department. A logistic regression model is used to assess the effect of driver characteristics, type of vehicles, road conditions, and environmental factors on fatigue-related traffic accident occurrence and severity. On the one hand, male drivers, trucks, driving during midnight to dawn, and morning rush hours are identified as risk factors of fatigue-related crashes but do not necessarily result in severe casualties. Driving at night without street-lights contributes to fatigue-related crashes and severe casualties. On the other hand, while factors such as less experienced drivers, unsafe vehicle status, slippery roads, driving at night with street-lights, and weekends do not have significant effect on fatigue-related crashes, yet accidents associated with these factors are likely to have severe casualties. The empirical results of the present study have important policy implications on the reduction of fatigue-related crashes as well as their severity. Copyright © 2015 Elsevier Ltd. All rights reserved.

  8. Accidents - Chernobyl accident; Accidents - accident de Tchernobyl

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This file is devoted to the Chernobyl accident. It is divided in four parts. The first part concerns the accident itself and its technical management. The second part is relative to the radiation doses and the different contaminations. The third part reports the sanitary effects, the determinists ones and the stochastic ones. The fourth and last part relates the consequences for the other European countries with the case of France. Through the different parts a point is tackled with the measures taken after the accident by the other countries to manage an accident, the cooperation between the different countries and the groups of research and studies about the reactors safety, and also with the international medical cooperation, specially for the children, everything in relation with the Chernobyl accident. (N.C.)

  9. Severe Accident Research Program plan update

    International Nuclear Information System (INIS)

    1992-12-01

    In August 1989, the staff published NUREG-1365, ''Revised Severe Accident Research Program Plan.'' Since 1989, significant progress has been made in severe accident research to warrant an update to NUREG-1365. The staff has prepared this SARP Plan Update to: (1) Identify those issues that have been closed or are near completion, (2) Describe the progress in our understanding of important severe accident phenomena, (3) Define the long-term research that is directed at improving our understanding of severe accident phenomena and developing improved methods for assessing core melt progression, direct containment heating, and fuel-coolant interactions, and (4) Reflect the growing emphasis in two additional areas--advanced light water reactors, and support for the assessment of criteria for containment performance during severe accidents. The report describes recent major accomplishments in understanding the underlying phenomena that can occur during a severe accident. These include Mark I liner failure, severe accident scaling methodology, source term issues, core-concrete interactions, hydrogen transport and combustion, TMI-2 Vessel Investigation Project, and direct containment heating. The report also describes the major planned activities under the SARP over the next several years. These activities will focus on two phenomenological issues (core melt progression, and fuel-coolant interactions and debris coolability) that have significant uncertainties that impact our understanding and ability to predict severe accident phenomena and their effect on containment performance SARP will also focus on severe accident code development, assessment and validation. As the staff completes the research on severe accident issues that relate to current generation reactors, continued research will focus on efforts to independently evaluate the capability of new advanced light water reactor designs to withstand severe accidents

  10. Rapid knowledge assessment (RKA): Assessing students content knowledge through rapid, in class assessment of expertise

    Science.gov (United States)

    O'Connell, Erin

    Understanding how students go about problem solving in chemistry lends many possible advantages for interventions in teaching strategies for the college classroom. The work presented here is the development of an in-classroom, real-time, formative instrument to assess student expertise in chemistry with the purpose of developing classroom interventions. The development of appropriate interventions requires the understanding of how students go about starting to solve tasks presented to them, what their mental effort (load on working memory) is, and whether or not their performance was accurate. To measure this, the Rapid Knowledge Assessment (RKA) instrument uses clickers (handheld electronic instruments for submitting answers) as a means of data collection. The classroom data was used to develop an algorithm to deliver student assessment scores, which when correlated to external measure of standardized American Chemical Society (ACS) examinations and class score show a significant relationship between the accuracy of knowledge assessment (p=0.000). Use of eye-tracking technology and student interviews supports the measurements found in the classroom.

  11. Risk assessment of aircraft accidents anywhere near an airport

    International Nuclear Information System (INIS)

    Barbaran, Gustavo; Jensen Mariani Santiago Nicolas

    2011-01-01

    This work analyzes the more suitable areas to build new facilities, taking into account the conditions imposed by an airport located nearby. Initially, it describes the major characteristics of the airport. Then, the restrictions imposed to ensure the normal operation of the aircraft are analyzed. Following, there is a summary of the evolution of studies of aircraft accidents at nuclear facilities. In the second part, three models of aircraft crash probabilities are presented, all of them developed in the U.S.A, each with an increasing level of complexity in modeling the likelihood of accidents. The first model is the 'STD-3014' Department of Energy (DOE), the second is the 'ACRAM'(Aircraft Crash Risk Assessment Methodology) prepared by the 'Lawrence Livermore National Laboratory'(LLNL) and finally the more advanced 'ACRP-3', produced by the 'Transportation Research Board'. The results obtained with the three models establish that the risks imposed on the airport vicinity, remain low due to the improvement and innovation in the aircraft's safety, reducing the risk margin for the location of new nuclear facilities near an airport. (author) [es

  12. Rapid assessment as an evaluation tool for polio national ...

    African Journals Online (AJOL)

    Rapid assessment as an evaluation tool for polio national immunisation days in Brong Ahafo region, Ghana. ... TM Akande, M Eshetu, G Bonsu ... Conclusion: Rapid assessment is a valuable tool for evaluation of NIDs; it enables timely intervention in covering missed children and helps in careful interpretation of the usual ...

  13. Reactor safety study. An assessment of accident risks in U.S. commercial nuclear power plants. Executive summary: main report

    International Nuclear Information System (INIS)

    1975-10-01

    Information is presented concerning the objectives and organization of the reactor safety study; the basic concepts of risk; the nature of nuclear power plant accidents; risk assessment methodology; reactor accident risk; and comparison of nuclear risks to other societal risks

  14. Lessons learned from accidents investigations

    Energy Technology Data Exchange (ETDEWEB)

    Zuniga-Bello, P. [Consejo Nacional de Ciencia y Tecnologia (CONACYT), Mexico City (Mexico); Croft, J. [National Radiological Protection Board (United Kingdom); Glenn, J

    1997-12-31

    Accidents from three main practices: medical applications, industrial radiography and industrial irradiators are used to illustrate some common causes of accidents and the main lessons to be learned. A brief description of some of these accidents is given. Lessons learned from the described accidents are approached by subjects covering: safety culture, quality assurance, human factors, good engineering practice, defence in depth, security of sources, safety assessment and monitoring and verification compliance. (author)

  15. Lessons learned from accident investigations

    International Nuclear Information System (INIS)

    Zuniga-Bello, P.; Croft, J.R.; Glenn, J.

    1998-01-01

    Accidents in three main practices - medical applications, industrial radiography and industrial irradiators - are used to illustrate some common causes of accidents and the main lessons to be learned from them. A brief description of some of these accidents is given. Lessons learned from the accidents described are approached bearing in mind: safety culture, quality assurance, human factors, good engineering practice, defence in depth, security of sources, safety assessment and monitoring and verification compliance. (author)

  16. Medical experience: Chernobyl and other accidents

    International Nuclear Information System (INIS)

    Densow, D.; Kindler, H.; Fliedner, T.M.

    2000-01-01

    A radiation accident can be defined as an involuntary relevant exposure of man to ionising radiation or radioactive material. Provided one of the ensuing criteria is met with at least one person involved in an excursion of ionising radiation and or radioactive material, the respective incident can be considered a radiation accident in accordance with ICRP, NCRP (US), and WHO: ≥0.25 Sv total body irradiation with lesions of the rapidly dividing tissues; ≥6 Sv cutaneous and local irradiation; ≥0.4 Sv local irradiation of other organ systems through external sources; incorporation equal to or in excess of more than half of the maximum permissible organ burden; and medical accidents meeting one of the above criteria. Several actions have been taken to categorise radiation accidents in order to learn from previous accidents in terms of both managerial and medical experience. For this presentation three approaches will be discussed concerning their relevance to the individual treatment and risk management. This will be obtained by applying three classification schemes to all known radiation accidents: 1. classification with respect to the accident mechanism, 2. classification concerning the radiation injury, and 3. classification concerning the extent of the accident. In a fourth chapter the efficacy of bone marrow transplantation will briefly be commented on based on the accumulated experience of about 400 radiation accidents world-wide. (author)

  17. Development of an accident management expert system for containment assessment

    International Nuclear Information System (INIS)

    Nelson, W.R.; Sebo, D.E.; Haney, L.N.

    1987-01-01

    The United States Nuclear Regulatory Commission (USNRSC) is sponsoring a program at the Idaho National Engineering Laboratory (INEL) to develop an accident management expert system. The intended users of the system are the personnel of the NRC Operations Center in Washington, D.C. The expert system will be used to help NRC personnel monitor and evaluate the status and management of the containment during a severe reactor accident. The knowledge base will include severe accident knowledge regarding the maintenance of the critical safety functions, especially containment integrity, during an accident. This paper summarizes the concepts that have been developed for the accident management expert system, and the plans that have been developed for its implementation

  18. French practice for assessing the fission product releases from the containment during a PWR severe accident

    International Nuclear Information System (INIS)

    Duco, J.; Dufresne, J.; L'homme, A.

    1988-10-01

    French safety philosophy as concerns severe PWR accidents has already been outlined by the Director of CEA/IPSN in an article published in ''Nuclear Safety''. Therefore the present paper will focus on: a) the French reference source terms, as used for elaborating ultimate emergency procedures on PWRs and for emergency planning; b) the methods currently developed for more realistic assessments of the release of fission products during a severe accident

  19. A quantitative assessment method for the NPP operators' diagnosis of accidents

    International Nuclear Information System (INIS)

    Kim, M. C.; Seong, P. H.

    2003-01-01

    In this research, we developed a quantitative model for the operators' diagnosis of the accident situation when an accident occurs in a nuclear power plant. After identifying the occurrence probabilities of accidents, the unavailabilities of various information sources, and the causal relationship between accidents and information sources, Bayesian network is used for the analysis of the change in the occurrence probabilities of accidents as the operators receive the information related to the status of the plant. The developed method is applied to a simple example case and it turned out that the developed method is a systematic quantitative analysis method which can cope with complex relationship between the accidents and information sources and various variables such accident occurrence probabilities and unavailabilities of various information sources

  20. The importance of long range atmospheric transport in probabilistic accident consequence assessment

    International Nuclear Information System (INIS)

    ApSimon, H.M.; Goddard, A.J.H.; Wilson, J.J.N.

    1988-01-01

    The disaster at the Chernobyl-4 reactor has demonstrated that severe nuclear accidents can give rise to significant radiological consequences several thousand kilometres from the source. The subsequent dispersion of the release over much of Western Europe further demonstrated the importance of synoptic scale weather patterns in determining the magnitude of the consequences of such accidents. A version of the MESOS-II European scale trajectory model, which is able to simulate large scale variations in weather conditions through the use of spatially and temporally variable meteorological input data, has been used to simulate the pattern of dispersion from Chernobyl with some success. This paper presents the results of probabilistic consequence assessments for a number of West European sites, made using the MESOS-II model. The results illustrate the effects, on probabilistic assessments, of using a more realistic treatment of long range atmospheric transport than the Gaussian plume model and also the spatial variation in the distributions of consequences arising from the variation in synoptic scale weather conditions across Western Europe

  1. Assessment and limitation of radioactivity transfers in the event of a postulated severe PWR accident

    International Nuclear Information System (INIS)

    Gauvain, J.

    1992-01-01

    This report constitutes the supporting material for a lecture on severe accidents which could occur on PWR type nuclear reactors. It is assumed for present purposes that the reader has at least a rudimentary acquaintance with the basics of general physics if not with the operating processes of these reactors. After defining what is meant by a ''severe accident'' on a reactor, the possible phenomenology of such an accident is qualitatively described: loss of coolant and loss of containment integrity. A certain number of elements are then given for the quantitative assessment of these phenomena involving possible radioactivity transfers within and outside the plant. In conclusion, available means are indicated for the limitation and control of these environmental transfers. (author). 5 refs, figs

  2. Probability safety assessment of LOOP accident to molten salt reactor

    International Nuclear Information System (INIS)

    Mei Mudan; Shao Shiwei; Yu Zhizhen; Chen Kun; Zuo Jiaxu

    2013-01-01

    Background: Loss of offsite power (LOOP) is a possible accident to any type of reactor, and this accident can reflect the main idea of reactor safety design. Therefore, it is very important to conduct a study on probabilistic safety assessment (PSA) of the molten salt reactor that is under LOOP circumstance. Purpose: The aim is to calculate the release frequency of molten salt radioactive material to the core caused by LOOP, and find out the biggest contributor to causing the radioactive release frequency. Methods: We carried out the PSA analysis of the LOOP using the PSA process risk spectrum, and assumed that the primary circuit had no valve and equipment reliability data based on the existing mature power plant equipment reliability data. Results: Through the PSA analysis, we got the accident sequences of the release of radioactive material to the core caused by LOOP and its frequency. The results show that the release frequency of molten salt radioactive material to the core caused by LOOP is about 2×10 -11 /(reactor ·year), which is far below that of the AP1000 LOOP. In addition, through the quantitative analysis, we obtained the point estimation and interval estimation of uncertainty analysis, and found that the biggest contributor to cause the release frequency of radioactive material to the core is the reactor cavity cooling function failure. Conclusion: This study provides effective help for the design and improvement of the following molten salt reactor system. (authors)

  3. Probabilistic accident consequence uncertainty analysis: Food chain uncertainty assessment. Volume 1: Main report

    Energy Technology Data Exchange (ETDEWEB)

    Brown, J. [National Radiological Protection Board (United Kingdom); Goossens, L.H.J.; Kraan, B.C.P. [Delft Univ. of Technology (Netherlands)] [and others

    1997-06-01

    This volume is the first of a two-volume document that summarizes a joint project conducted by the US Nuclear Regulatory Commission and the European Commission to assess uncertainties in the MACCS and COSYMA probabilistic accident consequence codes. These codes were developed primarily for estimating the risks presented by nuclear reactors based on postulated frequencies and magnitudes of potential accidents. This document reports on an ongoing project to assess uncertainty in the MACCS and COSYMA calculations for the offsite consequences of radionuclide releases by hypothetical nuclear power plant accidents. A panel of sixteen experts was formed to compile credible and traceable uncertainty distributions for food chain variables that affect calculations of offsite consequences. The expert judgment elicitation procedure and its outcomes are described in these volumes. Other panels were formed to consider uncertainty in other aspects of the codes. Their results are described in companion reports. Volume 1 contains background information and a complete description of the joint consequence uncertainty study. Volume 2 contains appendices that include (1) a summary of the MACCS and COSYMA consequence codes, (2) the elicitation questionnaires and case structures for both panels, (3) the rationales and results for the panels on soil and plant transfer and animal transfer, (4) short biographies of the experts, and (5) the aggregated results of their responses.

  4. Probabilistic accident consequence uncertainty analysis: Food chain uncertainty assessment. Volume 1: Main report

    International Nuclear Information System (INIS)

    Brown, J.; Goossens, L.H.J.; Kraan, B.C.P.

    1997-06-01

    This volume is the first of a two-volume document that summarizes a joint project conducted by the US Nuclear Regulatory Commission and the European Commission to assess uncertainties in the MACCS and COSYMA probabilistic accident consequence codes. These codes were developed primarily for estimating the risks presented by nuclear reactors based on postulated frequencies and magnitudes of potential accidents. This document reports on an ongoing project to assess uncertainty in the MACCS and COSYMA calculations for the offsite consequences of radionuclide releases by hypothetical nuclear power plant accidents. A panel of sixteen experts was formed to compile credible and traceable uncertainty distributions for food chain variables that affect calculations of offsite consequences. The expert judgment elicitation procedure and its outcomes are described in these volumes. Other panels were formed to consider uncertainty in other aspects of the codes. Their results are described in companion reports. Volume 1 contains background information and a complete description of the joint consequence uncertainty study. Volume 2 contains appendices that include (1) a summary of the MACCS and COSYMA consequence codes, (2) the elicitation questionnaires and case structures for both panels, (3) the rationales and results for the panels on soil and plant transfer and animal transfer, (4) short biographies of the experts, and (5) the aggregated results of their responses

  5. Summary of severe accident assessment for Atucha 2 Nuclear Power Plant using RELAP5/SCDAPSIM Mod3.6

    International Nuclear Information System (INIS)

    Bonelli, Analia; Mazzantini, Oscar; Siefken, Larry; Allison, Chris

    2014-01-01

    A severe accident assessment was performed for the Atucha 2 Nuclear Power Plant in Argentina. Atucha 2 is a PHWR, cooled and moderated by heavy water, presently in commissioning process. Its 451 fuel assemblies are 6.03m high and each composed of 37 Zircaloy clad fuel rods. Each assembly is placed inside an individual Zircaloy coolant channel. Heavy water coolant flows inside the channels which are all immersed inside the moderator tank. The RPV lower plenum is occupied by a massive steel structure called 'filling body' that was designed to minimize heavy water inventory. Due to some unique design characteristics, severe accident progression in Atucha 2 is expected to be somewhat different from that predicted for regular PWRs. Therefore, a very detailed assessment was performed, focused on the different accident stages and expected phenomena by the use of different input models and nodalizations. When possible, linking to available experimental data was performed. RELAP/SCDAPSIM Mod 3.6 was the computer code selected to perform this task. The modeling of Atucha 2's unique characteristics required several extensions to the code. For the severe accident assessment of Atucha 2, three different input models were developed that were key instruments for the debugging and evaluation process. A Single Channel Model was used to evaluate the first stages of core heatup (including the boiloff of the channels and moderator tank), an RPV standalone model was used to assess the interaction between components in the complete core and for the evaluation of late in-core melting and relocation. Then, a Lower Plenum standalone model was developed to assess the behavior of the melted and slumped core material on top of the filling body and to analyze ex-vessel cooling as a possible severe accident management action. For each of the cases, highlights of key results are shown and general conclusions are drawn. In the case of a severe accident with significant meltdown of

  6. A Time Series Model for Assessing the Trend and Forecasting the Road Traffic Accident Mortality

    Science.gov (United States)

    Yousefzadeh-Chabok, Shahrokh; Ranjbar-Taklimie, Fatemeh; Malekpouri, Reza; Razzaghi, Alireza

    2016-01-01

    Background Road traffic accident (RTA) is one of the main causes of trauma and known as a growing public health concern worldwide, especially in developing countries. Assessing the trend of fatalities in the past years and forecasting it enables us to make the appropriate planning for prevention and control. Objectives This study aimed to assess the trend of RTAs and forecast it in the next years by using time series modeling. Materials and Methods In this historical analytical study, the RTA mortalities in Zanjan Province, Iran, were evaluated during 2007 - 2013. The time series analyses including Box-Jenkins models were used to assess the trend of accident fatalities in previous years and forecast it for the next 4 years. Results The mean age of the victims was 37.22 years (SD = 20.01). From a total of 2571 deaths, 77.5% (n = 1992) were males and 22.5% (n = 579) were females. The study models showed a descending trend of fatalities in the study years. The SARIMA (1, 1, 3) (0, 1, 0) 12 model was recognized as a best fit model in forecasting the trend of fatalities. Forecasting model also showed a descending trend of traffic accident mortalities in the next 4 years. Conclusions There was a decreasing trend in the study and the future years. It seems that implementation of some interventions in the recent decade has had a positive effect on the decline of RTA fatalities. Nevertheless, there is still a need to pay more attention in order to prevent the occurrence and the mortalities related to traffic accidents. PMID:27800467

  7. Assessment Of Source Term And Radiological Consequences For Design Basis Accident And Beyond Design Basis Accident Of The Dalat Nuclear Research Reactor

    International Nuclear Information System (INIS)

    Luong Ba Vien; Le Vinh Vinh; Huynh Ton Nghiem; Nguyen Kien Cuong; Tran Tri Vien

    2011-01-01

    The paper presents results of the assessment of source terms and radiological consequences for the Design Basis Accident (DBA) and Beyond Design Basis Accident (BDBA) of the Dalat Nuclear Research Reactor. The dropping of one fuel assembly during fuel handling operation leading to the failure of fuel cladding and the release of fission products into the environment was selected as a DBA for the analysis. For the BDBA, the introduction of a step positive reactivity due to the falling of a heavy block from the rotating bridge crane in the reactor hall onto a part of the platform where are disposed the control rod drives is postulated. The result of the radiological consequence analyses shows that doses to members of the public are below annual dose limit for both DBA and BDBA events. However, doses from exposure to operating staff and experimenters working inside the reactor hall are predicted to be very high in case of BDBA and therefore the protective actions should be taken when the accident occurs. (author)

  8. Joint research project WASA-BOSS: Further development and application of severe accident codes. Assessment and optimization of accident management measures. Project B: Accident analyses for pressurized water reactors with the application of the ATHLET-CD code

    International Nuclear Information System (INIS)

    Jobst, Matthias; Kliem, Soeren; Kozmenkov, Yaroslav; Wilhelm, Polina

    2017-02-01

    Within the framework of the project an ATHLET-CD input deck for a generic German PWR of type KONVOI has been created. This input deck was applied to the simulation of severe accidents from the accident categories station blackout (SBO) and small-break loss-of-coolant accidents (SBLOCA). The complete accident transient from initial event at full power until the damage of reactor pressure vessel (RPV) is covered and all relevant severe accident phenomena are modelled: start of core heat up, fission product release, melting of fuel and absorber material, oxidation and release of hydrogen, relocation of molten material inside the core, relocation to the lower plenum, damage and failure of the RPV. The model has been applied to the analysis of preventive and mitigative accident management measures for SBO and SBLOCA transients. Therefore, the measures primary side depressurization (PSD), injection to the primary circuit by mobile pumps and for SBLOCA the delayed injection by the cold leg hydro-accumulators have been investigated and the assumptions and start criteria of these measures have been varied. The time evolutions of the transients and time margins for the initiation of additional measures have been assessed. An uncertainty and sensitivity study has been performed for the early phase of one SBO scenario with PSD (until the start of core melt). In addition to that, a code -to-code comparison between ATHLET-CD and the severe accident code MELCOR has been carried out.

  9. Application of the accident management information needs methodology to a severe accident sequence

    International Nuclear Information System (INIS)

    Ward, L.W.; Hanson, D.J.; Nelson, W.R.; Solberg, D.E.

    1989-01-01

    The U.S. Nuclear Regulatory Commission is conducting an accident management research program that emphasizes the use of severe accident research to enhance the ability of plant operating personnel to effectively manage severe accidents. Hence, it is necessary to ensure that the plant instrumentation and information systems adequately provide this information to the operating staff during accident conditions. A methodology to identify and assess the information needs of the operating staff of a nuclear power plant during a severe accident has been developed. The methodology identifies (a) the information needs of the plant personnel during a wide range of accident conditions, (b) the existing plant measurements capable of supplying these information needs and minor additions to instrument and display systems that would enhance management capabilities, (c) measurement capabilities and limitations during severe accident conditions, and (d) areas in which the information systems could mislead plant personnel

  10. Application of the accident management information needs methodology to a severe accident sequence

    Energy Technology Data Exchange (ETDEWEB)

    Ward, L.W.; Hanson, D.J.; Nelson, W.R. (Idaho National Engineering Laboratory, Idaho Falls (USA)); Solberg, D.E. (Nuclear Regulatory Commission, Washington, DC (USA))

    1989-11-01

    The U.S. Nuclear Regulatory Commission is conducting an accident management research program that emphasizes the use of severe accident research to enhance the ability of plant operating personnel to effectively manage severe accidents. Hence, it is necessary to ensure that the plant instrumentation and information systems adequately provide this information to the operating staff during accident conditions. A methodology to identify and assess the information needs of the operating staff of a nuclear power plant during a severe accident has been developed. The methodology identifies (a) the information needs of the plant personnel during a wide range of accident conditions, (b) the existing plant measurements capable of supplying these information needs and minor additions to instrument and display systems that would enhance management capabilities, (c) measurement capabilities and limitations during severe accident conditions, and (d) areas in which the information systems could mislead plant personnel.

  11. Federal Radiological Monitoring and Assessment Center (FRMAC), US response to major radiological accidents

    International Nuclear Information System (INIS)

    Mueller, P.G.

    2000-01-01

    During the 1960's and 70's the expanded use of nuclear materials to generate electricity, to provide medical benefits, and for research purposes continued to grow in the United States. While substantial effort went into constructing plants and facilities and providing for a number of redundant backup systems for safety purposes, little effort went into the development of emergency response plans for possible major radiological accidents. Unfortunately, adequate plans and procedures had not been developed to co-ordinate either state or federal emergency response assets and personnel should a major radiological accident occur. This situation became quite evident following the Three Mile Island Nuclear Reactor accident in 1979. An accident of that magnitude had not been adequately prepared for and Pennsylvania's limited emergency radiological resources and capabilities were quickly exhausted. Several federal agencies with statutory responsibilities for emergency response, including the U.S. Environmental Protection Agency (EPA), U.S. Department of Energy (DOE), Federal Emergency Management Agency (FEMA), Nuclear Regulatory Commission (NRC), and others provided extensive assistance and support during the accident. However, the assistance was not fully co-ordinated nor controlled. Following the Three Mile Island incident 13 federal agencies worked co-operatively to develop an agreement called the Federal Radiological Emergency Response Plan (FRERP). Signed in November 1985, this plan delineated the statutory responsibilities and authorities of each federal agency signatory to the FRERP. In the event of a major radiological accident, the FRERP would be activated to ensure that a co-ordinated federal emergency response would be available to respond to any major radiological accident scenario. The FRERP encompasses a wide variety of radiological accidents, not just those stemming from nuclear power plants. Activation of the FRERP could occur from major accidents involving

  12. Standardized reporting for rapid relative effectiveness assessments of pharmaceuticals.

    Science.gov (United States)

    Kleijnen, Sarah; Pasternack, Iris; Van de Casteele, Marc; Rossi, Bernardette; Cangini, Agnese; Di Bidino, Rossella; Jelenc, Marjetka; Abrishami, Payam; Autti-Rämö, Ilona; Seyfried, Hans; Wildbacher, Ingrid; Goettsch, Wim G

    2014-11-01

    Many European countries perform rapid assessments of the relative effectiveness (RE) of pharmaceuticals as part of the reimbursement decision making process. Increased sharing of information on RE across countries may save costs and reduce duplication of work. The objective of this article is to describe the development of a tool for rapid assessment of RE of new pharmaceuticals that enter the market, the HTA Core Model® for Rapid Relative Effectiveness Assessment (REA) of Pharmaceuticals. Eighteen member organisations of the European Network of Health Technology Assessment (EUnetHTA) participated in the development of the model. Different versions of the model were developed and piloted in this collaboration and adjusted accordingly based on feedback on the content and feasibility of the model. The final model deviates from the traditional HTA Core Model® used for assessing other types of technologies. This is due to the limited scope (strong focus on RE), the timing of the assessment (just after market authorisation), and strict timelines (e.g. 90 days) required for performing the assessment. The number of domains and assessment elements was limited and it was decided that the primary information sources should preferably be a submission file provided by the marketing authorisation holder and the European Public Assessment Report. The HTA Core Model® for Rapid REA (version 3.0) was developed to produce standardised transparent RE information of pharmaceuticals. Further piloting can provide input for possible improvements, such as further refining the assessment elements and new methodological guidance on relevant areas.

  13. Probability of spent fuel transportation accidents

    International Nuclear Information System (INIS)

    McClure, J.D.

    1981-07-01

    The transported volume of spent fuel, incident/accident experience and accident environment probabilities were reviewed in order to provide an estimate of spent fuel accident probabilities. In particular, the accident review assessed the accident experience for large casks of the type that could transport spent (irradiated) nuclear fuel. This review determined that since 1971, the beginning of official US Department of Transportation record keeping for accidents/incidents, there has been one spent fuel transportation accident. This information, coupled with estimated annual shipping volumes for spent fuel, indicated an estimated annual probability of a spent fuel transport accident of 5 x 10 -7 spent fuel accidents per mile. This is consistent with ordinary truck accident rates. A comparison of accident environments and regulatory test environments suggests that the probability of truck accidents exceeding regulatory test for impact is approximately 10 -9 /mile

  14. Assessment of the Impact on Ireland of the 2011 Fukushima Nuclear Accident

    International Nuclear Information System (INIS)

    McGinnity, P.; Currivan, L.; Duffy, J.; Hanley, O.; Kelleher, K.; McKittrick, L.; O'Colmain, M.; Organo, C.; Smith, K.; Somerville, S.; Wong, J.; McMahon, C.

    2012-03-01

    This report provides a summary of the events which led to the accident at the Fukushima Dai-ichi NPP and of the impact on Ireland of the resulting releases of radioactivity. It constitutes a comprehensive record and single point of reference for all of the data generated by the additional environmental monitoring which was performed in Ireland. Trace amounts of radioactive isotopes consistent with the Fukushima nuclear accident were detected in samples of air, rainwater and milk collected in Ireland during the period March to May 2011. The activities were at levels so low as to be only detectable with highly sensitive radio-analytical instrumentation. As such they were of no radiological significance in Ireland and no protective measures were required. The levels measured were consistent with those measured elsewhere in Europe. On the basis of the low levels of radioactivity detected, monitoring of other samples such as drinking water, other foods, grass and soils was not warranted. The accident proved a good test of Ireland's capacity to respond effectively to a nuclear emergency. It demonstrated that a comprehensive monitoring network capable of measuring even trace levels of radioactivity in the environment is in place. In addition, it showed the effectiveness of atmospheric dispersion models used by RPII as part of its technical assessment capability. However, it should be noted that for an accident closer to Ireland, a much larger monitoring response would almost certainly be required

  15. Aging, Loss-of-Coolant Accident (LOCA), and high potential testing of damaged cables

    International Nuclear Information System (INIS)

    Vigil, R.A.; Jacobus, M.J.

    1994-04-01

    Experiments were conducted to assess the effects of high potential testing of cables and to assess the survivability of aged and damaged cables under Loss-of-Coolant Accident (LOCA) conditions. High potential testing at 240 Vdc/mil on undamaged cables suggested that no damage was incurred on the selected virgin cables. During aging and LOCA testing, Okonite ethylene propylene rubber (EPR) cables with a bonded jacket experienced unexpected failures. The failures appear to be primarily related to the level of thermal aging and the presence of a bonded jacket that ages more rapidly than the insulation. For Brand Rex crosslinked polyolefin (XLPO) cables, the results suggest that 7 mils of insulation remaining should give the cables a high probability of surviving accident exposure following aging. The voltage necessary to detect when 7 mils of insulation remain on unaged Brand Rex cables is approximately 35 kVdc. This voltage level would almost certainly be unacceptable to a utility for use as a damage assessment tool. However, additional tests indicated that a 35 kvdc voltage application would not damage virgin Brand Rex cables when tested in water. Although two damaged Rockbestos silicone rubber cables also failed during the accident test, no correlation between failures and level of damage was apparent

  16. NIF: Impacts of chemical accidents and comparison of chemical/radiological accident approaches

    International Nuclear Information System (INIS)

    Lazaro, M.A.; Policastro, A.J.; Rhodes, M.

    1996-01-01

    The US Department of Energy (DOE) proposes to construct and operate the National Ignition Facility (NIF). The goals of the NIF are to (1) achieve fusion ignition in the laboratory for the first time by using inertial confinement fusion (ICF) technology based on an advanced-design neodymium glass solid-state laser, and (2) conduct high-energy-density experiments in support of national security and civilian applications. The primary focus of this paper is worker-public health and safety issues associated with postulated chemical accidents during the operation of NIF. The key findings from the accident analysis will be presented. Although NIF chemical accidents will be emphasized, the important differences between chemical and radiological accident analysis approaches and the metrics for reporting results will be highlighted. These differences are common EIS facility and transportation accident assessments

  17. Emergency Evacuation of Hazardous Chemical Accidents Based on Diffusion Simulation

    OpenAIRE

    Jiang-Hua Zhang; Hai-Yue Liu; Rui Zhu; Yang Liu

    2017-01-01

    The recent rapid development of information technology, such as sensing technology, communications technology, and database, allows us to use simulation experiments for analyzing serious accidents caused by hazardous chemicals. Due to the toxicity and diffusion of hazardous chemicals, these accidents often lead to not only severe consequences and economic losses, but also traffic jams at the same time. Emergency evacuation after hazardous chemical accidents is an effective means to reduce the...

  18. Accident management insights after the Fukushima Daiichi NPP accident

    International Nuclear Information System (INIS)

    Degueldre, Didier; Viktorov, Alexandre; Tuomainen, Minna; Ducamp, Francois; Chevalier, Sophie; Guigueno, Yves; Tasset, Daniel; Heinrich, Marcus; Schneider, Matthias; Funahashi, Toshihiro; Hotta, Akitoshi; Kajimoto, Mitsuhiro; Chung, Dae-Wook; Kuriene, Laima; Kozlova, Nadezhda; Zivko, Tomi; Aleza, Santiago; Jones, John; McHale, Jack; Nieh, Ho; Pascal, Ghislain; ); Nakoski, John; Neretin, Victor; Nezuka, Takayoshi; )

    2014-01-01

    The Fukushima Daiichi nuclear power plant (NPP) accident, that took place on 11 March 2011, initiated a significant number of activities at the national and international levels to reassess the safety of existing NPPs, evaluate the sufficiency of technical means and administrative measures available for emergency response, and develop recommendations for increasing the robustness of NPPs to withstand extreme external events and beyond design basis accidents. The OECD Nuclear Energy Agency (NEA) is working closely with its member and partner countries to examine the causes of the accident and to identify lessons learnt with a view to the appropriate follow-up actions to be taken by the nuclear safety community. Accident management is a priority area of work for the NEA to address lessons being learnt from the accident at the Fukushima Daiichi NPP following the recommendations of Committee on Nuclear Regulatory Activities (CNRA), Committee on the Safety of Nuclear Installations (CSNI), and Committee on Radiation Protection and Public Health (CRPPH). Considering the importance of these issues, the CNRA authorised the formation of a task group on accident management (TGAM) in June 2012 to review the regulatory framework for accident management following the Fukushima Daiichi NPP accident. The task group was requested to assess the NEA member countries needs and challenges in light of the accident from a regulatory point of view. The general objectives of the TGAM review were to consider: - enhancements of on-site accident management procedures and guidelines based on lessons learnt from the Fukushima Daiichi NPP accident; - decision-making and guiding principles in emergency situations; - guidance for instrumentation, equipment and supplies for addressing long-term aspects of accident management; - guidance and implementation when taking extreme measures for accident management. The report is built on the existing bases for capabilities to respond to design basis

  19. Professional experience and traffic accidents/near-miss accidents among truck drivers.

    Science.gov (United States)

    Girotto, Edmarlon; Andrade, Selma Maffei de; González, Alberto Durán; Mesas, Arthur Eumann

    2016-10-01

    To investigate the relationship between the time working as a truck driver and the report of involvement in traffic accidents or near-miss accidents. A cross-sectional study was performed with truck drivers transporting products from the Brazilian grain harvest to the Port of Paranaguá, Paraná, Brazil. The drivers were interviewed regarding sociodemographic characteristics, working conditions, behavior in traffic and involvement in accidents or near-miss accidents in the previous 12 months. Subsequently, the participants answered a self-applied questionnaire on substance use. The time of professional experience as drivers was categorized in tertiles. Statistical analyses were performed through the construction of models adjusted by multinomial regression to assess the relationship between the length of experience as a truck driver and the involvement in accidents or near-miss accidents. This study included 665 male drivers with an average age of 42.2 (±11.1) years. Among them, 7.2% and 41.7% of the drivers reported involvement in accidents and near-miss accidents, respectively. In fully adjusted analysis, the 3rd tertile of professional experience (>22years) was shown to be inversely associated with involvement in accidents (odds ratio [OR] 0.29; 95% confidence interval [CI] 0.16-0.52) and near-miss accidents (OR 0.17; 95% CI 0.05-0.53). The 2nd tertile of professional experience (11-22 years) was inversely associated with involvement in accidents (OR 0.63; 95% CI 0.40-0.98). An evident relationship was observed between longer professional experience and a reduction in reporting involvement in accidents and near-miss accidents, regardless of age, substance use, working conditions and behavior in traffic. Copyright © 2016 Elsevier Ltd. All rights reserved.

  20. [Essential aspects of ophthalmological expert assessment in private accident insurance].

    Science.gov (United States)

    Tost, F

    2014-06-01

    Commissions for an expert assessment place basically high demands on commissioned eye specialists because this activity differs from the normal routine field of work. In addition to assessing objective symptoms and subjective symptomatics in a special analytical manner, eye specialists are expected to have knowledge of basic legal terminology, such as proximate cause, evidence and evidential value. Only under these prerequisites can an ophthalmologist fulfill the function of an expert with a high level of quality and adequately adjust the special medical ophthalmological expertise to the requirements of the predominantly legally based clients commissioning the report and oriented to the appropriate valid legal norms. Particularly common difficulties associated with making an ophthalmological expert report for private accident insurance, e.g. determination of the reduction in functional quality, consideration of partial causality and assessment of diplopia are discussed.

  1. ECONO-MARC: A method for assessing the cost of emergency countermeasures after an accident

    International Nuclear Information System (INIS)

    Clark, M.J.; Dionian, J.

    1982-12-01

    A method is proposed for assessing the cost of emergency countermeasures taken to reduce radiation exposures after an accidental release of radionuclides into the environment. The cost is estimated as the potential loss of goods and services due to the imposition of countermeasures, measured by a lost contribution to the nation's Gross Domestic Product (GDP). A primary aim in developing such a method is to provide the basis for clear quantitative inputs to difficult decisions in emergency planning; decisions on whether to apply countermeasures, and on the extent to which they should be applied. The method should also provide useful inputs to nuclear siting policy and to safety design assessments. While the method should aid decision-making, it does not measure all the costs; other major costs of nuclear accidents, such as the loss of nuclear plant capacity and the social disruption caused by countermeasures require separate additional assessment. The models in the MARC procedure for accident assessment are under continuing review. This memorandum records the method currently included in ECONO-MARC; additional models and improved procedures will be incorporated, as appropriate, in the future. (author)

  2. Effects of the Chernobyl accident on public perceptions of nuclear plant accident risks

    International Nuclear Information System (INIS)

    Lindell, M.K.; Perry, R.W.

    1990-01-01

    Assessments of public perceptions of the characteristics of a nuclear power plant accident and affective responses to its likelihood were conducted 5 months before and 1 month after the Chernobyl accident. Analyses of data from 69 residents of southwestern Washington showed significant test-retest correlations for only 10 of 18 variables--accident likelihood, three measures of impact characteristics, three measures of affective reactions, and hazard knowledge by governmental sources. Of these variables, only two had significant changes in mean ratings; frequency of thought and frequency of discussion about a nearby nuclear power plant both increased. While there were significant changes only for two personal consequences (expectations of cancer and genetic effects), both of these decreased. The results of this study indicate that more attention should be given to assessing the stability of risk perceptions over time. Moreover, the data demonstrate that experience with a major accident can actually decrease rather than increase perceptions of threat

  3. Database on aircraft accidents

    International Nuclear Information System (INIS)

    Nishio, Masahide; Koriyama, Tamio

    2012-09-01

    The Reactor Safety Subcommittee in the Nuclear Safety and Preservation Committee published the report 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' as the standard method for evaluating probability of aircraft crash into nuclear reactor facilities in July 2002. In response to the report, Japan Nuclear Energy Safety Organization has been collecting open information on aircraft accidents of commercial airplanes, self-defense force (SDF) airplanes and US force airplanes every year since 2003, sorting out them and developing the database of aircraft accidents for latest 20 years to evaluate probability of aircraft crash into nuclear reactor facilities. This year, the database was revised by adding aircraft accidents in 2010 to the existing database and deleting aircraft accidents in 1991 from it, resulting in development of the revised 2011 database for latest 20 years from 1991 to 2010. Furthermore, the flight information on commercial aircrafts was also collected to develop the flight database for latest 20 years from 1991 to 2010 to evaluate probability of aircraft crash into reactor facilities. The method for developing the database of aircraft accidents to evaluate probability of aircraft crash into reactor facilities is based on the report 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' described above. The 2011 revised database for latest 20 years from 1991 to 2010 shows the followings. The trend of the 2011 database changes little as compared to the last year's one. (1) The data of commercial aircraft accidents is based on 'Aircraft accident investigation reports of Japan transport safety board' of Ministry of Land, Infrastructure, Transport and Tourism. 4 large fixed-wing aircraft accidents, 58 small fixed-wing aircraft accidents, 5 large bladed aircraft accidents and 114 small bladed aircraft accidents occurred. The relevant accidents for evaluating

  4. Using MFM methodology to generate and define major accident scenarios for quantitative risk assessment studies

    DEFF Research Database (Denmark)

    Hua, Xinsheng; Wu, Zongzhi; Lind, Morten

    2017-01-01

    to calculate likelihood of each MAS. Combining the likelihood of each scenario with a qualitative risk matrix, each major accident scenario is thereby ranked for consideration for detailed consequence analysis. The methodology is successfully highlighted using part of BMA-process for production of hydrogen......Generating and defining Major Accident Scenarios (MAS) are commonly agreed as the key step for quantitative risk assessment (QRA). The aim of the study is to explore the feasibility of using Multilevel Flow Modeling (MFM) methodology to formulating MAS. Traditionally this is usually done based...

  5. JAERI's activities in JCO accident

    International Nuclear Information System (INIS)

    2000-09-01

    The Japan Atomic Energy Research Institute (JAERI) was actively involved in a variety of technical supports and cooperative activities, such as advice on terminating the criticality condition, contamination checks of the residents and consultation services for the residents, as emergency response actions to the criticality accident at the uranium processing facility operated by the JCO Co. Ltd., which occurred on September 30, 1999. These activities were carried out in collaborative ways by the JAERI staff from the Tokai Research Establishment, Naka Fusion Research Establishment, Oarai Research Establishment, and Headquarter Office in Tokyo. As well, the JAERI was engaged in the post-accident activities such as identification of accident causes, analyses of the criticality accident, and dose assessment of exposed residents, to support the Headquarter for Accident Countermeasures of the Science and Technology Agency (STA), the Accident Investigation Committee and the Health Control Committee of the Nuclear Safety Commission of Japan (NSC). This report compiles the activities, that the JAERI has conducted to date, including the discussions on measures for terminating the criticality condition, evaluation of the fission number, radiation monitoring in the environment, dose assessment, analyses of criticality dynamics. (author)

  6. Environmental accident and its treatment in a developing country: a case study on China.

    Science.gov (United States)

    Hou, Yu

    2012-08-01

    Along with their rapid progress, developing countries have had to deal with more environmental problems, which have been a cause for concern among policy makers and the public in general. This study cites two accidents that happened in China in 2006 that caused serious environmental problems in nearby communities and discusses the problems these accidents created and the resulting disputes among the concerned people. Pollution-causing accidents not only pose threats to the health of the victims but also give rise to environmental disputes that jeopardise national security and social stability. Conflicts normally ensue following a pollution-causing accident, which are more likely to happen within a development zone or industrial park. Few environmental conflicts in the past decades were resolved through litigation. Nevertheless, there are lapses in the regulatory system, which have to be addressed to ensure that the public's rights and interests are protected. Currently, reports on pollution-causing accidents are difficult to obtain and are often released very late. A majority of industrial firms operate without environmental clearance, thus highlighting the government's inefficiency in environmental management. It is about time that the Chinese government takes seriously the use of the Environmental Impact Assessment.

  7. Enhancing AP1000 reactor accident management capabilities for long term accidents

    International Nuclear Information System (INIS)

    Jiang Pingting; Liu Mengying; Duan Chengjie; Liao Yehong

    2015-01-01

    Passive safety actions are considered as main measures under severe accident in AP1000 power plant. However, risk is still existed. According to PSA, several probable scenarios for AP1000 nuclear power plant are analyzed in this paper with MAAP the severe accident analysis code. According to the analysis results, several deficiencies of AP1000 severe accident management are found. The long term cooling and containment depressurization capability for AP1000 power plant appear to be most important factors under such accidents. Then, several temporary strategies for AP1000 power plant are suggested, including PCCWST temporary water supply strategy after 72h, temporary injection strategy for IRWST, hydrogen relief action in fuel building, which would improve the safety of AP1000 power plant. At last, assessments of effectiveness for these strategies are performed, and the results are compared with analysis without these strategies. The comparisons showed that correct actions of these strategies would effectively prevent the accident process of AP1000 power plant. (author)

  8. Object-Oriented Bayesian Networks (OOBN) for Aviation Accident Modeling and Technology Portfolio Impact Assessment

    Science.gov (United States)

    Shih, Ann T.; Ancel, Ersin; Jones, Sharon M.

    2012-01-01

    The concern for reducing aviation safety risk is rising as the National Airspace System in the United States transforms to the Next Generation Air Transportation System (NextGen). The NASA Aviation Safety Program is committed to developing an effective aviation safety technology portfolio to meet the challenges of this transformation and to mitigate relevant safety risks. The paper focuses on the reasoning of selecting Object-Oriented Bayesian Networks (OOBN) as the technique and commercial software for the accident modeling and portfolio assessment. To illustrate the benefits of OOBN in a large and complex aviation accident model, the in-flight Loss-of-Control Accident Framework (LOCAF) constructed as an influence diagram is presented. An OOBN approach not only simplifies construction and maintenance of complex causal networks for the modelers, but also offers a well-organized hierarchical network that is easier for decision makers to exploit the model examining the effectiveness of risk mitigation strategies through technology insertions.

  9. Monitoring and surveillance in accident situations

    International Nuclear Information System (INIS)

    Chadwick, K.; Menzel, H.

    1993-01-01

    The Chernobyl accident, which occurred on 26 April 1986, presented major challenges to the European Community with respect to the practical and regulatory aspects of radiation protection, public information, trade -particularly in food - and international politics. The Chernobyl accident was also a major challenge to the international scientific community which had to evaluate rapidly the radiological consequences of the accident and advise on the introduction at Chernobyl, countermeasures to reduce the consequences of radioactive contamination had been conceived largely in the context of relatively small accidental releases and for application over relatively small areas. Less consideration had been given to the practical implications of applying such measures in the case of a large source and a spread over a very large area

  10. A systematic framework for effective uncertainty assessment of severe accident calculations; Hybrid qualitative and quantitative methodology

    International Nuclear Information System (INIS)

    Hoseyni, Seyed Mohsen; Pourgol-Mohammad, Mohammad; Tehranifard, Ali Abbaspour; Yousefpour, Faramarz

    2014-01-01

    This paper describes a systematic framework for characterizing important phenomena and quantifying the degree of contribution of each parameter to the output in severe accident uncertainty assessment. The proposed methodology comprises qualitative as well as quantitative phases. The qualitative part so called Modified PIRT, being a robust process of PIRT for more precise quantification of uncertainties, is a two step process for identifying and ranking based on uncertainty importance in severe accident phenomena. In this process identified severe accident phenomena are ranked according to their effect on the figure of merit and their level of knowledge. Analytical Hierarchical Process (AHP) serves here as a systematic approach for severe accident phenomena ranking. Formal uncertainty importance technique is used to estimate the degree of credibility of the severe accident model(s) used to represent the important phenomena. The methodology uses subjective justification by evaluating available information and data from experiments, and code predictions for this step. The quantitative part utilizes uncertainty importance measures for the quantification of the effect of each input parameter to the output uncertainty. A response surface fitting approach is proposed for estimating associated uncertainties with less calculation cost. The quantitative results are used to plan in reducing epistemic uncertainty in the output variable(s). The application of the proposed methodology is demonstrated for the ACRR MP-2 severe accident test facility. - Highlights: • A two stage framework for severe accident uncertainty analysis is proposed. • Modified PIRT qualitatively identifies and ranks uncertainty sources more precisely. • Uncertainty importance measure quantitatively calculates effect of each uncertainty source. • Methodology is applied successfully on ACRR MP-2 severe accident test facility

  11. Nuclear accidents and bone marrow graft

    International Nuclear Information System (INIS)

    Bernard, J.

    1988-01-01

    In case of serious contamination, the only efficacious treatment is the bone marrow grafts. The graft types and conditions have been explained. To restrict the nuclear accidents consequences, it is recommended to: - take osseous medulla of the personnel exposed to radiations and preserve it , that permits to carry out rapidly the auto-graft in case of accidents; - determine, beforehand, the HLA group of the personnel; - to register the voluntary donors names and addresses, and their HLA group, that permits to find easily a compatible donar in case of allo-graft. (author)

  12. Rapid Health and Needs assessments after disasters: a systematic review

    Directory of Open Access Journals (Sweden)

    Yzermans CJ

    2010-06-01

    Full Text Available Abstract Background Publichealth care providers, stakeholders and policy makers request a rapid insight into health status and needs of the affected population after disasters. To our knowledge, there is no standardized rapid assessment tool for European countries. The aim of this article is to describe existing tools used internationally and analyze them for the development of a workable rapid assessment. Methods A review was conducted, including original studies concerning a rapid health and/or needs assessment. The studies used were published between 1980 and 2009. The electronic databasesof Medline, Embase, SciSearch and Psychinfo were used. Results Thirty-three studies were included for this review. The majority of the studies was of US origin and in most cases related to natural disasters, especially concerning the weather. In eighteen studies an assessment was conducted using a structured questionnaire, eleven studies used registries and four used both methods. Questionnaires were primarily used to asses the health needs, while data records were used to assess the health status of disaster victims. Conclusions Methods most commonly used were face to face interviews and data extracted from existing registries. Ideally, a rapid assessment tool is needed which does not add to the burden of disaster victims. In this perspective, the use of existing medical registries in combination with a brief questionnaire in the aftermath of disasters is the most promising. Since there is an increasing need for such a tool this approach needs further examination.

  13. Research on waterhammer caused by a rapid gas production in the severe accident of a light water reactor

    International Nuclear Information System (INIS)

    Inasaka, Fujio; Adachi, Masaki; Shiozaki, Kohki; Aya, Izuo; Nariai, Hideki

    2004-01-01

    In the severe accident of an LWR (Light Water Reactor), it is supposed that a large quantity of gas is generated in a water pool of the containment vessel due to a water-metal reaction or a steam explosion. A rapid bubble growth, if the water mass is pushed up having a coherency in time and direction in its movement, would give a severe waterhammer to the structure. In this study, we conducted experiments using two cylindrical model containment vessels with 1.0 and 0.428 m diameters, and investigated the behavior of water mass pushed up by a growing bubble and the scale effect of this phenomenon. In addition, we also closely observed the heavier of a growing bubble. In these experiments, a rapid bubble growth was simulated by injecting high-pressure air into a water pool. It was observed that the water mass was pushed up without an air penetration until the water level reached a certain elevation. On the basis of all data, experimental correlations which gave a rise distance or velocity of the water mass with coherency were proposed and the waterhammer pressure which affected the structure was quantitatively evaluated. The applicability of the existing two-phase flow numerical analysis code, RELAP5-3D to the waterhammer phenomenon caused by a rapid gas production was also verified. (author)

  14. Environmental assessment of the Chernobyl releases in China

    International Nuclear Information System (INIS)

    Zunsu, H.

    1988-01-01

    Since Chernobyl accident, China has rapidly developed a program of emergency preparedness for nuclear accidents that the institute of radiation protection assumes the responsibility together with other institutions. For the nuclear power plants in Qinshan and in Daya Bay, a series of emergency preparedness, including the investigation of conditions and feasibility of some principal protective measures are being carried out. The research program includes atmospheric transfer and dispersion, modelling analysis of accident consequence assessment and development of a computer software system for accident consequence prediction. The strategy of China is to well organize all resources and to broaden the international cooperation. The drafting of national emergency regulations and technical guides and the establishment of specialized technical teams are in progress. In China, the accident consequence assessment is based on the specialist experiences from transfer of radioactive effluents in the atmosphere, in water and in ecological system. On May 1986 environmental assessment of the Chernobyl releases in China and environmental monitoring were carried out. Radio-nuclides released from the Chernobyl accident were detectable in all parts of country but the concentrations were very low. The results of the environmental monitoring have been presented. 7 figs., 11 tabs. (author)

  15. Accident statistics and the human-factor element.

    Science.gov (United States)

    Shuckburgh, J S

    1975-01-01

    The number of fatal accidents involving public transport aircraft has increased significantly in recent years and, because more and more "wide-bodied" aircraft have been coming into service, this has resulted in a rapid increase in the number of fatalities. A combined attack on the problem by all concerned with flight safety is required to improve the situation. The collection and analysis of aircraft accident data can contribute to safety in two ways; by giving an indication of where to concentrate future effort and by showing how successful past efforts have been. An analysis of worldwide accident statistics by phase of flight and causal factor show that the largest percentage of accidents occurs in the approach and landing phase and are caused by "pilot error". Further research is needed to find out why pilots make errors and how such errors can be eliminated.

  16. Measurements of the Chernobyl accident fallout in Israel and the assessment of the radiation doses to the population

    International Nuclear Information System (INIS)

    Stern, E.; Ilberg, D.; Brenner, S.

    1997-01-01

    Israel is located approximately 2000 km southeast of Chernobyl. The fallout from the accident in Chernobyl reactor no. 4 on April 26, 1986 arrived in Israel on the night of May 2nd. Following the accident, studies of the radiological effects were initiated by many countries some of them many thousands of kilometers away. These studies can be characterized by three periods: a) First months following the accident - Measurements were taken to assess the immediate impact and to propose countermeasures that would reduce doses incurred by the population. b) First years following the accidents - Measurements were taken to validate that radioecological effects are well below any regulatory limits, from both the fallout radioactivity in the country and import of food coming from other affected areas. c) The last years (e.g. 1990-1995) - Measurements were taken within the regular program of environmental radioactivity surveillance. In this paper we have compiled the results of the studies in Israel which have followed the three phases mentioned above. Assessment of the accumulated potential radiation doses to the population in Israel was made based on the results of those measurements covered in the three phases, considering the various possible pathways

  17. Fuel behaviour in the case of severe accidents and potential ATF designs. Fuel Behavior in Severe Accidents and Potential Accident Tolerance Fuel Designs

    International Nuclear Information System (INIS)

    Cheng, Bo

    2013-01-01

    This presentation reviews the conditions of fuel rods under severe loss of coolant conditions, approaches that may increase coping time for plant operators to recover, requirements of advanced fuel cladding to increase tolerance in accident conditions, potential candidate alloys for accident-tolerant fuel cladding and a novel design of molybdenum (Mo) -based fuel cladding. The current Zr-alloy fuel cladding will lose all its mechanical strength at 750-800 deg. C, and will react rapidly with high-pressure steam, producing significant hydrogen and exothermic heat at 700-1000 deg. C. The metallurgical properties of Zr make it unlikely that modifications of the Zr-alloy will improve the behaviour of Zr-alloys at temperatures relevant to severe accidents. The Mo-based fuel cladding is designed to (1) maintain fuel rod integrity, and reduce the release rate of hydrogen and exothermic heat in accident conditions at 1200-1500 deg. C. The EPRI research has thus far completed the design concepts, demonstration of feasibility of producing very thin wall (0.2 mm) Mo tubes. The feasibility of depositing a protective coating using various techniques has also been demonstrated. Demonstration of forming composite Mo-based cladding via mechanical reduction has been planned

  18. The nuclear accidents: Causes and consequences

    International Nuclear Information System (INIS)

    Rochd, M.

    1988-01-01

    The author discussed and compared the real causes of T.M.I. and Chernobyl accidents and cited their consequences. To better understand how these accidents occurred, a brief description of PWR type (reactor type of T.M.I.) and of RBMK type (reactor type of Chernobyl) has been presented. The author has also set out briefly the safety analysis objectives and the three barriers established to protect the public against the radiological consequences. To distinguish failures that cause severe accidents and to analyze them in details, it is necessary to classify the accidents. There are many ways to do it according to their initiator event, or to their frequency, or to their degree of gravity. The safety criteria adopted by nuclear industry have been explained. These criteria specify the limits of certain physical parameters that should not be exceeded in case of incidents or accidents. To compare the real causes of T.M.I. and Chernobyl accidents, the events that led to both have been presented. As observed the main common contributing factors in both cases are that the operators did not pay attention to warnings and signals that were available to them and that they were not trained to handle these accident sequences. The essential conclusions derived from these severe accidents are: -The improvement of operators competence contribute to reduce the accident risks; -The rapid and correct diagnosis of real conditions at each point of the accidents permits an appropriate behavior that would bring the plant to a stable state; -Competent technical teams have to intervene and to assist the operators in case of emergency; -Emergency plans and an international collaboration are necessary to limit the accident risks. 11 figs. (author)

  19. Internal dose assessment due to large area contamination: Main lessons drawn from the Chernobyl accident

    Energy Technology Data Exchange (ETDEWEB)

    Andrasi, A [KFKI Atomic Energy Research Inst., Budapest (Hungary)

    1997-03-01

    The reactor accident at Chernobyl in 1986 beside its serious and tragic consequences provided also an excellent opportunity to check, test and validate all kind of environmental models and calculation tools which were available in the emergency preparedness systems of different countries. Assessment of internal and external doses due to the accident has been carried out for the population all over Europe using different methods. Dose predictions based on environmental model calculation considering various pathways have been compared with those obtained by more direct monitoring methods. One study from Hungary and one from the TAEA is presented shortly. (orig./DG)

  20. Internal dose assessment due to large area contamination: Main lessons drawn from the Chernobyl accident

    International Nuclear Information System (INIS)

    Andrasi, A.

    1997-01-01

    The reactor accident at Chernobyl in 1986 beside its serious and tragic consequences provided also an excellent opportunity to check, test and validate all kind of environmental models and calculation tools which were available in the emergency preparedness systems of different countries. Assessment of internal and external doses due to the accident has been carried out for the population all over Europe using different methods. Dose predictions based on environmental model calculation considering various pathways have been compared with those obtained by more direct monitoring methods. One study from Hungary and one from the TAEA is presented shortly. (orig./DG)

  1. Accidents Preventive Practice for High-Rise Construction

    Directory of Open Access Journals (Sweden)

    Goh Kai Chen

    2016-01-01

    Full Text Available The demand of high-rise projects continues to grow due to the reducing of usable land area in Klang Valley, Malaysia. The rapidly development of high-rise projects has leaded to the rise of fatalities and accidents. An accident that happened in a construction site can cause serious physical injury. The accidents such as people falling from height and struck by falling object were the most frequent accidents happened in Malaysian construction industry. The continuous growth of high-rise buildings indicates that there is a need of an effective safety and health management. Hence, this research aims to identify the causes of accidents and the ways to prevent accidents that occur at high-rise building construction site. Qualitative method was employed in this research. Interview surveying with safety officers who are involved in highrise building project in Kuala Lumpur were conducted in this research. Accidents were caused by man-made factors, environment factors or machinery factors. The accidents prevention methods were provide sufficient Personal Protective Equipment (PPE, have a good housekeeping, execute safety inspection, provide safety training and execute accidents investigation. In the meanwhile, interviewees have suggested the new prevention methods that were develop a proper site layout planning and de-merit and merit system among sub-contractors, suppliers and even employees regarding safety at workplace matters. This research helps in explaining the causes of accidents and identifying area where prevention action should be implemented, so that workers and top management will increase awareness in preventing site accidents.

  2. Application of dynamic probabilistic safety assessment approach for accident sequence precursor analysis: Case study for steam generator tube rupture

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Han Sul; Heo, Gyun Young [Kyung Hee University, Yongin (Korea, Republic of); Kim, Tae Wan [Incheon National University, Incheon (Korea, Republic of)

    2017-03-15

    The purpose of this research is to introduce the technical standard of accident sequence precursor (ASP) analysis, and to propose a case study using the dynamic-probabilistic safety assessment (D-PSA) approach. The D-PSA approach can aid in the determination of high-risk/low-frequency accident scenarios from all potential scenarios. It can also be used to investigate the dynamic interaction between the physical state and the actions of the operator in an accident situation for risk quantification. This approach lends significant potential for safety analysis. Furthermore, the D-PSA approach provides a more realistic risk assessment by minimizing assumptions used in the conventional PSA model so-called the static-PSA model, which are relatively static in comparison. We performed risk quantification of a steam generator tube rupture (SGTR) accident using the dynamic event tree (DET) methodology, which is the most widely used methodology in D-PSA. The risk quantification results of D-PSA and S-PSA are compared and evaluated. Suggestions and recommendations for using D-PSA are described in order to provide a technical perspective.

  3. Application of dynamic probabilistic safety assessment approach for accident sequence precursor analysis: Case study for steam generator tube rupture

    International Nuclear Information System (INIS)

    Lee, Han Sul; Heo, Gyun Young; Kim, Tae Wan

    2017-01-01

    The purpose of this research is to introduce the technical standard of accident sequence precursor (ASP) analysis, and to propose a case study using the dynamic-probabilistic safety assessment (D-PSA) approach. The D-PSA approach can aid in the determination of high-risk/low-frequency accident scenarios from all potential scenarios. It can also be used to investigate the dynamic interaction between the physical state and the actions of the operator in an accident situation for risk quantification. This approach lends significant potential for safety analysis. Furthermore, the D-PSA approach provides a more realistic risk assessment by minimizing assumptions used in the conventional PSA model so-called the static-PSA model, which are relatively static in comparison. We performed risk quantification of a steam generator tube rupture (SGTR) accident using the dynamic event tree (DET) methodology, which is the most widely used methodology in D-PSA. The risk quantification results of D-PSA and S-PSA are compared and evaluated. Suggestions and recommendations for using D-PSA are described in order to provide a technical perspective

  4. 40 CFR 68.42 - Five-year accident history.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Five-year accident history. 68.42... (CONTINUED) CHEMICAL ACCIDENT PREVENTION PROVISIONS Hazard Assessment § 68.42 Five-year accident history. (a) The owner or operator shall include in the five-year accident history all accidental releases from...

  5. Improvement of the assessment of the external costs of severe nuclear accidents

    International Nuclear Information System (INIS)

    Markandya, A.; Dale, N.; Schneider, T.

    1998-12-01

    The first part of this document presents a bibliographic study on the accidents costs. The second part is devoted to an empirical study realized in Spain, concerning the risk assessment by experts. The third part proposes an approach in terms of hope of utility for the aversion calculation facing the major risks. The last part presents the probabilities transformations taking into account the human perception of the risk. (A.L.B.)

  6. Statistical aspects of carbon fiber risk assessment modeling. [fire accidents involving aircraft

    Science.gov (United States)

    Gross, D.; Miller, D. R.; Soland, R. M.

    1980-01-01

    The probabilistic and statistical aspects of the carbon fiber risk assessment modeling of fire accidents involving commercial aircraft are examined. Three major sources of uncertainty in the modeling effort are identified. These are: (1) imprecise knowledge in establishing the model; (2) parameter estimation; and (3)Monte Carlo sampling error. All three sources of uncertainty are treated and statistical procedures are utilized and/or developed to control them wherever possible.

  7. Three Mile Island epidemiologic radiation dose assessment revisited: 25 years after the accident.

    Science.gov (United States)

    Field, R William

    2005-01-01

    Over the past 25 years, public health concerns following the Three Mile Island (TMI) accident prompted several epidemiologic investigations in the vicinity of TMI. One of these studies is ongoing. This commentary suggests that the major source of radiation exposure to the population has been ignored as a potential confounding factor or effect modifying factor in previous and ongoing TMI epidemiologic studies that explore whether or not TMI accidental plant radiation releases caused an increase in lung cancer in the community around TMI. The commentary also documents the observation that the counties around TMI have the highest regional radon potential in the United States and concludes that radon progeny exposure should be included as part of the overall radiation dose assessment in future studies of radiation-induced lung cancer resulting from the TMI accident.

  8. Three Mile Island epidemiologic radiation dose assessment revisited: 25 years after the accident

    International Nuclear Information System (INIS)

    Field, R. W.

    2005-01-01

    Over the past 25 years, public health concerns following the Three Mile Island (TMI) accident prompted several epidemiologic investigations in the vicinity of TMI. One of these studies is ongoing. This commentary suggests that the major source of radiation exposure to the population has been ignored as a potential confounding factor or effect modifying factor in previous and ongoing TMI epidemiologic studies that explore whether or not TMI accidental plant radiation releases caused an increase in lung cancer in the community around TMI. The commentary also documents the observation that the counties around TMI have the highest regional radon potential in the United States and concludes that radon progeny exposure should be included as part of the overall radiation dose assessment in future studies of radiation-induced lung cancer resulting from the TMI accident. (authors)

  9. Applying probabilistic methods for assessments and calculations for accident prevention

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    The guidelines for the prevention of accidents require plant design-specific and radioecological calculations to be made in order to show that maximum acceptable expsoure values will not be exceeded in case of an accident. For this purpose, main parameters affecting the accident scenario have to be determined by probabilistic methods. This offers the advantage that parameters can be quantified on the basis of unambigious and realistic criteria, and final results can be defined in terms of conservativity. (DG) [de

  10. Application of the accident management information needs methodology to a severe accident sequence

    International Nuclear Information System (INIS)

    Ward, L.W.; Hanson, D.J.; Nelson, W.R.; Solberg, D.E.

    1989-01-01

    The U.S. Nuclear Regulatory Commission (NRC) is conducting an Accident Management Research Program that emphasizes the application of severe accident research results to enhance the capability of plant operating personnel to effectively manage severe accidents. A methodology to identify and assess the information needs of the operating staff of a nuclear power plant during a severe accident has been developed as part of the research program designed to resolve this issue. The methodology identifies the information needs of the plant personnel during a wide range of accident conditions, the existing plant measurements capable of supplying these information needs and what, if any minor additions to instrument and display systems would enhance the capability to manage accidents, known limitations on the capability of these measurements to function properly under the conditions that will be present during a wide range of severe accidents, and areas in which the information systems could mislead plant personnel. This paper presents an application of this methodology to a severe accident sequence to demonstrate its use in identifying the information which is available for management of the event. The methodology has been applied to a severe accident sequence in a Pressurized Water Reactor with a large dry containment. An examination of the capability of the existing measurements was then performed to determine whether the information needs can be supplied

  11. Accidents - Chernobyl accident

    International Nuclear Information System (INIS)

    2004-01-01

    This file is devoted to the Chernobyl accident. It is divided in four parts. The first part concerns the accident itself and its technical management. The second part is relative to the radiation doses and the different contaminations. The third part reports the sanitary effects, the determinists ones and the stochastic ones. The fourth and last part relates the consequences for the other European countries with the case of France. Through the different parts a point is tackled with the measures taken after the accident by the other countries to manage an accident, the cooperation between the different countries and the groups of research and studies about the reactors safety, and also with the international medical cooperation, specially for the children, everything in relation with the Chernobyl accident. (N.C.)

  12. The impact of the Fukushima nuclear accident on marine biota: Retrospective assessment of the first year and perspectives

    International Nuclear Information System (INIS)

    Vives i Batlle, Jordi; Aono, Tatsuo; Brown, Justin E.; Hosseini, Ali; Garnier-Laplace, Jacqueline; Sazykina, Tatiana; Steenhuisen, Frits; Strand, Per

    2014-01-01

    An international study under the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) was performed to assess radiological impact of the nuclear accident at the Fukushima-Daiichi Nuclear Power Station (FDNPS) on the marine environment. This work constitutes the first international assessment of this type, drawing upon methodologies that incorporate the most up-to-date radioecological models and knowledge. To quantify the radiological impact on marine wildlife, a suite of state-of-the-art approaches to assess exposures to Fukushima derived radionuclides of marine biota, including predictive dynamic transfer modelling, was applied to a comprehensive dataset consisting of over 500 sediment, 6000 seawater and 5000 biota data points representative of the geographically relevant area during the first year after the accident. The dataset covers the period from May 2011 to August 2012. The method used to evaluate the ecological impact consists of comparing dose (rates) to which living species of interest are exposed during a defined period to critical effects values arising from the literature. The assessed doses follow a highly variable pattern and generally do not seem to indicate the potential for effects. A possible exception of a transient nature is the relatively contaminated area in the vicinity of the discharge point, where effects on sensitive endpoints in individual plants and animals might have occurred in the weeks directly following the accident. However, impacts on population integrity would have been unlikely due to the short duration and the limited space area of the initially high exposures. Our understanding of the biological impact of radiation on chronically exposed plants and animals continues to evolve, and still needs to be improved through future studies in the FDNPS marine environment. - Highlights: • UNSCEAR assessment of the Fukushima accident impact on the marine environment. • The study covers the period from

  13. The impact of the Fukushima nuclear accident on marine biota: Retrospective assessment of the first year and perspectives

    Energy Technology Data Exchange (ETDEWEB)

    Vives i Batlle, Jordi, E-mail: jordi.vives.i.batlle@sckcen.be [Biosphere Impact Studies Unit, Belgian Nuclear Research Centre SCK-CEN, Boeretang 200, 2400 Mol (Belgium); Aono, Tatsuo [National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba 263-8555 (Japan); Brown, Justin E.; Hosseini, Ali [Norwegian Radiation Protection Authority, Grini næringspark 13, 1332 Østerås (Norway); CERAD Centre of Excellence, Grini næringspark 13, 1332 Østerås (Norway); Garnier-Laplace, Jacqueline [Institute for Radioprotection and Nuclear Safety, Department for research and expertise in environmental risks, PRP-ENV/SERIS, Cadarache, Building 159, 13115 Saint-Paul-Lez-Durance Cedex (France); Sazykina, Tatiana [State Institution Research and Production Association Typhoon, 4 Pobedy Str., Obninsk, Kaluga Region 249038 (Russian Federation); Steenhuisen, Frits [Arctic Centre, University of Groningen, Groningen (Netherlands); Strand, Per [Norwegian Radiation Protection Authority, Grini næringspark 13, 1332 Østerås (Norway); CERAD Centre of Excellence, Grini næringspark 13, 1332 Østerås (Norway)

    2014-07-01

    An international study under the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) was performed to assess radiological impact of the nuclear accident at the Fukushima-Daiichi Nuclear Power Station (FDNPS) on the marine environment. This work constitutes the first international assessment of this type, drawing upon methodologies that incorporate the most up-to-date radioecological models and knowledge. To quantify the radiological impact on marine wildlife, a suite of state-of-the-art approaches to assess exposures to Fukushima derived radionuclides of marine biota, including predictive dynamic transfer modelling, was applied to a comprehensive dataset consisting of over 500 sediment, 6000 seawater and 5000 biota data points representative of the geographically relevant area during the first year after the accident. The dataset covers the period from May 2011 to August 2012. The method used to evaluate the ecological impact consists of comparing dose (rates) to which living species of interest are exposed during a defined period to critical effects values arising from the literature. The assessed doses follow a highly variable pattern and generally do not seem to indicate the potential for effects. A possible exception of a transient nature is the relatively contaminated area in the vicinity of the discharge point, where effects on sensitive endpoints in individual plants and animals might have occurred in the weeks directly following the accident. However, impacts on population integrity would have been unlikely due to the short duration and the limited space area of the initially high exposures. Our understanding of the biological impact of radiation on chronically exposed plants and animals continues to evolve, and still needs to be improved through future studies in the FDNPS marine environment. - Highlights: • UNSCEAR assessment of the Fukushima accident impact on the marine environment. • The study covers the period from

  14. Key Characteristics of Combined Accident including TLOFW accident for PSA Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Bo Gyung; Kang, Hyun Gook [KAIST, Daejeon (Korea, Republic of); Yoon, Ho Joon [Khalifa University of Science, Technology and Research, Abu Dhabi (United Arab Emirates)

    2015-05-15

    The conventional PSA techniques cannot adequately evaluate all events. The conventional PSA models usually focus on single internal events such as DBAs, the external hazards such as fire, seismic. However, the Fukushima accident of Japan in 2011 reveals that very rare event is necessary to be considered in the PSA model to prevent the radioactive release to environment caused by poor treatment based on lack of the information, and to improve the emergency operation procedure. Especially, the results from PSA can be used to decision making for regulators. Moreover, designers can consider the weakness of plant safety based on the quantified results and understand accident sequence based on human actions and system availability. This study is for PSA modeling of combined accidents including total loss of feedwater (TLOFW) accident. The TLOFW accident is a representative accident involving the failure of cooling through secondary side. If the amount of heat transfer is not enough due to the failure of secondary side, the heat will be accumulated to the primary side by continuous core decay heat. Transients with loss of feedwater include total loss of feedwater accident, loss of condenser vacuum accident, and closure of all MSIVs. When residual heat removal by the secondary side is terminated, the safety injection into the RCS with direct primary depressurization would provide alternative heat removal. This operation is called feed and bleed (F and B) operation. Combined accidents including TLOFW accident are very rare event and partially considered in conventional PSA model. Since the necessity of F and B operation is related to plant conditions, the PSA modeling for combined accidents including TLOFW accident is necessary to identify the design and operational vulnerabilities.The PSA is significant to assess the risk of NPPs, and to identify the design and operational vulnerabilities. Even though the combined accident is very rare event, the consequence of combined

  15. Radiological aspects of nuclear accident scenarios. Volume 1 real-time emergency response systems post-Chernobyl action

    International Nuclear Information System (INIS)

    Sinnaeve, J.

    1991-01-01

    In the event of a nuclear accident, there is a need for a rapid assessment of the resulting levels of environmental contamination in order to facilitate decisions on possible countermeasures. Volume 1 of this report covers the development of numerical models, in the form of software packages, to simulate atmospheric transport and deposition over various distances, and techniques for estimation of the resulting doses

  16. Licensing topical report: application of probabilistic risk assessment in the selection of design basis accidents

    International Nuclear Information System (INIS)

    Houghton, W.J.

    1980-06-01

    A probabilistic risk assessment (PRA) approach is proposed to be used to scrutinize selection of accident sequences. A technique is described in this Licensing Topical Report to identify candidates for Design Basis Accidents (DBAs) utilizing the risk assessment results. As a part of this technique, it is proposed that events with frequencies below a specified limit would not be candidates. The use of the methodology described is supplementary to the traditional, deterministic approach and may result, in some cases, in the selection of multiple failure sequences as DBAs; it may also provide a basis for not considering some traditionally postulated events as being DBAs. A process is then described for selecting a list of DBAs based on the candidates from PRA as supplementary to knowledge and judgments from past licensing practice. These DBAs would be the events considered in Chapter 15 of Safety Analysis Reports of high-temperature gas-cooled reactors

  17. Socioeconomic consequences of nuclear reactor accidents

    International Nuclear Information System (INIS)

    Tawil, J.J.; Callaway, J.W.; Coles, B.L.; Cronin, F.J.; Currie, J.W.; Imhoff, K.L.; Lewis, P.M.; Nesse, R.J.; Strenge, D.L.

    1984-06-01

    This report identifies and characterizes the off-site socioeconomic consequences that would likely result from a severe radiological accident at a nuclear power plant. The types of impacts that are addressed include economic impacts, health impacts, social/psychological impacts and institutional impacts. These impacts are identified for each of several phases of a reactor accident - from the warning phase through the post-resettlement phase. The relative importance of the impact during each accident phase and the degree to which the impact can be predicted are indicated. The report also examines the methods that are currently used for assessing nuclear reactor accidents, including development of accident scenarios and the estimating of socioeconomic accident consequences with various models. Finally, a critical evaluation is made regarding the use of impact analyses in estimating the contribution of socioeconomic consequences to nuclear accident reactor accident risk. 116 references, 7 figures, 15 tables

  18. The safety assessment of OPR-1000 nuclear power plant for station blackout accident applying the combined deterministic and probabilistic procedure

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Dong Gu, E-mail: littlewing@kins.re.kr [Korea Institute of Nuclear Safety, 62 Gwahak-ro, Yuseong-gu, Daejeon 305-338 (Korea, Republic of); Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of); Chang, Soon Heung [Korea Advanced Institute of Science and Technology, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701 (Korea, Republic of)

    2014-08-15

    Highlights: • The combined deterministic and probabilistic procedure (CDPP) was proposed for safety assessment of the BDBAs. • The safety assessment of OPR-1000 nuclear power plant for SBO accident is performed by applying the CDPP. • By estimating the offsite power restoration time appropriately, the SBO risk is reevaluated. • It is concluded that the CDPP is applicable to safety assessment of BDBAs without significant erosion of the safety margin. - Abstract: Station blackout (SBO) is a typical beyond design basis accident (BDBA) and significant contributor to overall plant risk. The risk analysis of SBO could be important basis of rulemaking, accident mitigation strategy, etc. Recently, studies on the integrated approach of deterministic and probabilistic method for nuclear safety in nuclear power plants have been done, and among them, the combined deterministic and probabilistic procedure (CDPP) was proposed for safety assessment of the BDBAs. In the CDPP, the conditional exceedance probability obtained by the best estimate plus uncertainty method acts as go-between deterministic and probabilistic safety assessments, resulting in more reliable values of core damage frequency and conditional core damage probability. In this study, the safety assessment of OPR-1000 nuclear power plant for SBO accident was performed by applying the CDPP. It was confirmed that the SBO risk should be reevaluated by eliminating excessive conservatism in existing probabilistic safety assessment to meet the targeted core damage frequency and conditional core damage probability. By estimating the offsite power restoration time appropriately, the SBO risk was reevaluated, and it was finally confirmed that current OPR-1000 system lies in the acceptable risk against the SBO. In addition, it is concluded that the CDPP is applicable to safety assessment of BDBAs in nuclear power plants without significant erosion of the safety margin.

  19. [Accidents in travellers - the hidden epidemic].

    Science.gov (United States)

    Walz, Alexander; Hatz, Christoph

    2013-06-01

    The risk of malaria and other communicable diseases is well addressed in pre-travel advice. Accidents are usually less discussed. Thus, we aimed at assessing accident figures for the Swiss population, based on data of the register from 2004 to 2008 of the largest Swiss accident insurance organization (SUVA). More than 139'000 accidents over 5 years showed that 65 % of the accidents overseas are injuries, and 24 % are caused by poisoning or harm by cold, heat or air pressure. Most accidents happened during leisure activities or sports. More than one third of the non-lethal and more than 50 % of the fatal accidents happened in Asia. More than three-quarters of non-lethal accidents take place in people between 25 and 54 years. One out of 74 insured persons has an accident abroad per year. Despite of many analysis short-comings of the data set with regard to overseas travel, the figures document the underestimated burden of disease caused by accidents abroad and should affect the given pre-health advice.

  20. What are the factors that contribute to road accidents? An assessment of law enforcement views, ordinary drivers' opinions, and road accident records.

    Science.gov (United States)

    Rolison, Jonathan J; Regev, Shirley; Moutari, Salissou; Feeney, Aidan

    2018-06-01

    What are the main contributing factors to road accidents? Factors such as inexperience, lack of skill, and risk-taking behaviors have been associated with the collisions of young drivers. In contrast, visual, cognitive, and mobility impairment have been associated with the collisions of older drivers. We investigated the main causes of road accidents by drawing on multiple sources: expert views of police officers, lay views of the driving public, and official road accident records. In Studies 1 and 2, police officers and the public were asked about the typical causes of road traffic collisions using hypothetical accident scenarios. In Study 3, we investigated whether the views of police officers and the public about accident causation influence their recall accuracy for factors reported to contribute to hypothetical road accidents. The results show that both expert views of police officers and lay views of the driving public closely approximated the typical factors associated with the collisions of young and older drivers, as determined from official accident records. The results also reveal potential underreporting of factors in existing accident records, identifying possible inadequacies in law enforcement practices for investigating driver distraction, drug and alcohol impairment, and uncorrected or defective eyesight. Our investigation also highlights a need for accident report forms to be continuously reviewed and updated to ensure that contributing factor lists reflect the full range of factors that contribute to road accidents. Finally, the views held by police officers and the public on accident causation influenced their memory recall of factors involved in hypothetical scenarios. These findings indicate that delay in completing accident report forms should be minimised, possibly by use of mobile reporting devices at the accident scene. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

  1. Explanatory memorandum on European Community Document 6323/87: proposal for a Council decision on a Community system of rapid exchange of information in cases of abnormal levels of radioactivity or of a nuclear accident

    International Nuclear Information System (INIS)

    1987-01-01

    The Council of the European Commnity proposes a system of rapid exchange of information in cases of abnormal radioactivity or a nuclear accident. In addition to the existing procedures of early notification drawn up by the International Atomic Energy Authority this proposes a further notification system between member states of the European Community. Under this there would be notification, not only of accidents with possible transboundary effects, but of any accident for which emergency measures are taken to protect the public. However, the United Kingdom would prefer the trigger of these procedures to be abnormally high radiation levels rather than the introduction of emergency measures. (U.K.)

  2. Assessment of Loads and Performance of a Containment in a Hypothetical Accident (ALPHA). Facility design report

    International Nuclear Information System (INIS)

    Yamano, Norihiro; Maruyama, Yu; Kudo, Tamotsu; Moriyama, Kiyofumi; Ito, Hideo; Komori, Keiichi; Sonobe, Hisao; Sugimoto, Jun

    1998-06-01

    In the ALPHA (Assessment of Loads and Performance of Containment in Hypothetical Accident) program, several tests have been performed to quantitatively evaluate loads to and performance of a containment vessel during a severe accident of a light water reactor. The ALPHA program focuses on investigating leak behavior through the containment vessel, fuel-coolant interaction, molten core-concrete interaction and FP aerosol behavior, which are generally recognized as significant phenomena considered to occur in the containment. In designing the experimental facility, it was considered to simulate appropriately the phenomena mentioned above, and to cover experimental conditions not covered by previous works involving high pressure and temperature. Experiments from the viewpoint of accident management were also included in the scope. The present report describes design specifications, dimensions, instrumentation of the ALPHA facility based on the specific test objectives and procedures. (author)

  3. Measurements of the Chernobyl accident fallout in Israel and the assessment of the radiation doses to the population

    Energy Technology Data Exchange (ETDEWEB)

    Stern, E; Ilberg, D [Israel Atomic Energy Commission, Beer-Sheva, Negev (Israel); Brenner, S [Ministry of Environment, Yerusalem (Israel); and others

    1997-09-01

    Israel is located approximately 2000 km southeast of Chernobyl. The fallout from the accident in Chernobyl reactor no. 4 on April 26, 1986 arrived in Israel on the night of May 2nd. Following the accident, studies of the radiological effects were initiated by many countries some of them many thousands of kilometers away. These studies can be characterized by three periods: a) First months following the accident - Measurements were taken to assess the immediate impact and to propose countermeasures that would reduce doses incurred by the population. b) First years following the accidents - Measurements were taken to validate that radioecological effects are well below any regulatory limits, from both the fallout radioactivity in the country and import of food coming from other affected areas. c) The last years (e.g. 1990-1995) - Measurements were taken within the regular program of environmental radioactivity surveillance. In this paper we have compiled the results of the studies in Israel which have followed the three phases mentioned above. Assessment of the accumulated potential radiation doses to the population in Israel was made based on the results of those measurements covered in the three phases, considering the various possible pathways. 7 refs, 1 fig., 5 tabs.

  4. The unique field experiments on the assessment of accident consequences at industrial enterprises of gas-chemical complexes

    International Nuclear Information System (INIS)

    Belov, N.S.; Trebin, I.S.; Sorokovikova, O.

    1998-01-01

    Sour natural gas fields are the unique raw material base for setting up such large enterprises as gas chemical complexes. The presence of high toxic H 2 S in natural gas results in widening a range of dangerous and harmful factors for biosphere. Emission of such gases into atmosphere during accidents at gas wells and gas pipelines is of especial danger for environment and first of all for people. Development of mathematical forecast models for assessment of accidents progression and consequences is one of the main elements of works on safety analysis and risk assessment. The critical step in development of such models is their validation using the experimental material. Full-scale experiments have been conducted by the All-Union Scientific-Research institute of Natural Gases and Gas Technology (VNIIGAZ) for grounding of sizes of hazard zones in case of the severe accidents with the gas pipelines. The source of emergency gas release was the working gas pipelines with 100 mm dia. And 110 km length. This pipeline was used for transportation of natural gas with significant amount of hydrogen sulphide. During these experiments significant quantities of the gas including H 2 S were released into the atmosphere and then concentrations of gas and H 2 S were measured in the accident region. The results of these experiments are used for validation of atmospheric dispersion models including the new Lagrangian trace stochastic model that takes into account a wide range of meteorological factors. This model was developed as a part of computer system for decision-making support in case of accident release of toxic gases into atmosphere at the enterprises of Russian gas industry. (authors)

  5. Have the consequences of reactor accidents for the population been well assessed? Six questions to the experts in the field

    Energy Technology Data Exchange (ETDEWEB)

    Pohl, Peter

    2016-07-15

    Six questions to the experts in the field are posed: (1) Why is the assessment of accident consequences not separated in long-term and peak exposure? (2) Why is the exposure due to I-131 seen critical mainly in regard to the thyroid? (3) Do you have any reliable relations of health risk versus peak exposure? (4) Why do you not abolish the LNT assumption and replace it with a threshold model? (5) Why do you include indirect, psycho-somatic effects in assessing the consequences of reactor accidents when this is not customary with accidents with often more casualties? (6) How can the number of Chernobyl-assigned thyroid cancers have risen from some 600 about to some 4,000 today, when the latency period is in the range of 4 to 5 years?.

  6. Source term assessment, containment atmosphere control systems, and accident consequences. Report to CSNI by an OECD/NEA Group of experts

    International Nuclear Information System (INIS)

    1987-04-01

    CSNI Report 135 summarizes the results of the work performed by CSNI's Principal Working Group No. 4 on the Source Term and Environmental Consequences (PWG4) during the period extending from 1983 to 1986. This document contains the latest information on some important topics relating to source terms, accident consequence assessment, and containment atmospheric control systems. It consists of five parts: (1) a Foreword and Executive Summary prepared by PWG4's Chairman; (2) a Report on the Technical Status of the Source Term; (3) a Report on the Technical Status of Filtration and Containment Atmosphere Control Systems for Nuclear Reactors in the Event of a Severe Accident; (4) a Report on the Technical Status of Reactor Accident Consequence Assessment; (5) a list of members of PWG4

  7. The consequences of Chernobyl accident

    Directory of Open Access Journals (Sweden)

    Ion Chioșilă

    2016-12-01

    Full Text Available These days marks 30 years since the Chernobyl nuclear accident, followed by massive radioactive contamination of the environment and human in Belarus, Ukraine and Russia, and resulted in many deaths among people who intervened to decrease the effects of the nuclear disaster. The 26 April 1986 nuclear accident contaminated all European countries, but at a much lower level, without highlighted consequences on human health. In special laboratories, the main radionuclides (I-131, Cs-137, Cs-134 and Sr-90 were also analyzed in Romania from environmental samples, food, even human subjects. These radionuclides caused the population to receive a low dose of about 1 mSv in 1986 that is half of the dose of the natural background radiation (2.4 mSv per year. As in all European countries (excluding Ukraine, Belarus and Russia this dose of about 1 mSv fell rapidly by 1990, reaching levels close to ones before the accident at the nuclear tests.

  8. Assessment of generic accident management strategies considered for near term implementation

    International Nuclear Information System (INIS)

    Lehner, J.R.; Luckas, W.J.; Vandenkieboom, J.J.

    1989-01-01

    The US Nuclear Regulatory Commission (NRC) and the industry are both participating in the identification of measures that can prevent the progression of a severe accident or mitigate its consequences. Information important for evaluating these accident management strategies for specific plants is expected to result from the ongoing Individual Plant Evaluation (IPE) program. However, NRC staff have identified a number of generic strategies which may not have to await the results of the IPE program and therefore can be considered for earlier implementation. The NRC requested two of its contractors, Brookhaven National Laboratory (BNL) and Battelle Pacific Northwest Laboratories (PNL) to evaluate these strategies. The twenty one candidate strategies fall under three broad global strategies: (1) conserving and replenishing limited resources, (2) use of systems/components in innovative applications, and (3) defeating interlocks and component protective trips in emergencies. Some strategies apply to BWRs or PWRs only, other apply to both types of plants. This paper describes the evaluation of the strategies performed by Brookhaven National Laboratory. Brookhaven National Laboratory assessed the proposed strategies by first detailing the objective of the strategy and listing the actions involved in the implementation. A description of the plant systems associated with the strategy was given. Next, the applicability of existing rules or plant procedures to a particular strategy was investigated. This was accomplished by a fairly detailed, but by no means exhaustive review of the emergency operating procedures of several plants, as well as utility and NRC reports related to accident management

  9. Database on aircraft accidents

    International Nuclear Information System (INIS)

    Nishio, Masahide; Koriyama, Tamio

    2013-11-01

    The Reactor Safety Subcommittee in the Nuclear Safety and Preservation Committee published 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' as the standard method for evaluating probability of aircraft crash into nuclear reactor facilities in July 2002. In response to this issue, Japan Nuclear Energy Safety Organization has been collecting open information on aircraft accidents of commercial airplanes, self-defense force (SDF) airplanes and US force airplanes every year since 2003, sorting out them and developing the database of aircraft accidents for the latest 20 years to evaluate probability of aircraft crash into nuclear reactor facilities. In this report the database was revised by adding aircraft accidents in 2011 to the existing database and deleting aircraft accidents in 1991 from it, resulting in development of the revised 2012 database for the latest 20 years from 1992 to 2011. Furthermore, the flight information on commercial aircrafts was also collected to develop the flight database for the latest 20 years from 1992 to 2011 to evaluate probability of aircraft crash into reactor facilities. The method for developing the database of aircraft accidents to evaluate probability of aircraft crash into reactor facilities is based on the report 'The criteria on assessment of probability of aircraft crash into light water reactor facilities' described above. The 2012 revised database for the latest 20 years from 1992 to 2011 shows the followings. The trend of the 2012 database changes little as compared to the last year's report. (1) The data of commercial aircraft accidents is based on 'Aircraft accident investigation reports of Japan transport safety board' of Ministry of Land, Infrastructure, Transport and Tourism. The number of commercial aircraft accidents is 4 for large fixed-wing aircraft, 58 for small fixed-wing aircraft, 5 for large bladed aircraft and 99 for small bladed aircraft. The relevant accidents

  10. Joint research project WASA-BOSS: Further development and application of severe accident codes. Assessment and optimization of accident management measures. Project B: Accident analyses for pressurized water reactors with the application of the ATHLET-CD code; Verbundprojekt WASA-BOSS: Weiterentwicklung und Anwendung von Severe Accident Codes. Bewertung und Optimierung von Stoerfallmassnahmen. Teilprojekt B: Druckwasserreaktor-Stoerfallanalysen unter Verwendung des Severe-Accident-Codes ATHLET-CD

    Energy Technology Data Exchange (ETDEWEB)

    Jobst, Matthias; Kliem, Soeren; Kozmenkov, Yaroslav; Wilhelm, Polina

    2017-02-15

    Within the framework of the project an ATHLET-CD input deck for a generic German PWR of type KONVOI has been created. This input deck was applied to the simulation of severe accidents from the accident categories station blackout (SBO) and small-break loss-of-coolant accidents (SBLOCA). The complete accident transient from initial event at full power until the damage of reactor pressure vessel (RPV) is covered and all relevant severe accident phenomena are modelled: start of core heat up, fission product release, melting of fuel and absorber material, oxidation and release of hydrogen, relocation of molten material inside the core, relocation to the lower plenum, damage and failure of the RPV. The model has been applied to the analysis of preventive and mitigative accident management measures for SBO and SBLOCA transients. Therefore, the measures primary side depressurization (PSD), injection to the primary circuit by mobile pumps and for SBLOCA the delayed injection by the cold leg hydro-accumulators have been investigated and the assumptions and start criteria of these measures have been varied. The time evolutions of the transients and time margins for the initiation of additional measures have been assessed. An uncertainty and sensitivity study has been performed for the early phase of one SBO scenario with PSD (until the start of core melt). In addition to that, a code -to-code comparison between ATHLET-CD and the severe accident code MELCOR has been carried out.

  11. Utilization of accident databases and fuzzy sets to estimate frequency of HazMat transport accidents

    International Nuclear Information System (INIS)

    Qiao Yuanhua; Keren, Nir; Mannan, M. Sam

    2009-01-01

    Risk assessment and management of transportation of hazardous materials (HazMat) require the estimation of accident frequency. This paper presents a methodology to estimate hazardous materials transportation accident frequency by utilizing publicly available databases and expert knowledge. The estimation process addresses route-dependent and route-independent variables. Negative binomial regression is applied to an analysis of the Department of Public Safety (DPS) accident database to derive basic accident frequency as a function of route-dependent variables, while the effects of route-independent variables are modeled by fuzzy logic. The integrated methodology provides the basis for an overall transportation risk analysis, which can be used later to develop a decision support system.

  12. Incidence and related factors of traffic accidents among the older population in a rapidly aging society.

    Science.gov (United States)

    Hong, Kimyong; Lee, Kyoung-Mu; Jang, Soong-nang

    2015-01-01

    To estimate the incidence of traffic accidents and find related factors among the older population. We used the cross-sectional data from the Korean Community Health Survey (KCHS), which was conducted between 2008 and 2010 and completed by 680,202 adults aged 19 years or more. And we used individuals aged 60 years or above (n=210,914). The incidence of traffic accidents was estimated as number of traffic accidents experienced per thousand per year by a number of factors including age, sex, residential area, education, employment status, and diagnosis with chronic diseases. Multiple logistic regression was used to estimate odds ratios (ORs) and 95% confidence intervals (CIs) for each potential risk factor adjusted for the others. Incidence of traffic accidents was estimated as 11.74/1,000 per year for men, and 7.65/1,000 per year for women. It tended to decline as age increased among women; compared to the youngest old age group (60-64), the older old groups (70-74 and 80+) were at lower risk for traffic accidents. Depressive symptom was the strongest predictor for both men (OR=1.83, 95% CI=1.28-2.61) and women (1.70, 1.23-2.35). Risk of traffic accident was greater in employed men (1.76, 1.40-2.22) and women diagnosis with arthritis (1.36, 1.06-1.75). Given that the incidence of and factors associated with traffic accidents differ between men and women, preventive strategies, such as driver education and traffic safety counseling for older adults, should be modified in accordance with these differences. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  13. Status report on the EPRI fuel cycle accident risk assessment

    International Nuclear Information System (INIS)

    Erdmann, R.C.; Fullwood, R.R.; Garcia, A.A.; Mendoza, Z.T.; Ritzman, R.L.; Stevens, C.A.

    1979-07-01

    This report summarizes and extends the work reported in five unpublished draft reports: the accidental radiological risk of reprocessing spent fuel, mixed oxide fuel fabrication, the transportation of materials within the fuel cycle, and the disposal of nuclear wastes, and the routine atmospheric radiological risk of mining and milling uranium-bearing ore. Results show that the total risk contribution of the fuel cycle is only about 1% of the accident risk of the power plant and hence, with little error, the accident risk of nuclear electric power is that of the power plant itself. The power plant risk, assuming a very large usage of nuclear power by the year 2005, is only about 0.5% of the radiological risk of natural background. This work aims at a realistic assessment of the process hazards, the effectiveness of confinement and mitigation systems and procedures, and the associated likelihoods and estimated errors. The primary probabilistic estimation tool is fault tree analysis with the release source terms calculated using physical--chemical processes. Doses and health effects are calculated with the CRAC code. No evacuation or mitigation is considered: source terms may be conservative through the assumption of high fuel burnup (40,000 MWd/T) and short cooling (90 to 150 d); HEPA filter efficiencies are derived from experiments

  14. A first assessment of the psychic and social effects of the Chernobyl accident

    International Nuclear Information System (INIS)

    Heriard Dubreuil, G.

    1994-01-01

    A synthesis has been made of a series of surveys carried out in Ukraine in 1992 and 1993 on the psychic and social consequences of the Chernobyl accident, within the framework of the ''Evaluation programme of the consequences of the Chernobyl nuclear accident'' of the Commission of the European communities. The main results demonstrate the strength of the post-accident dynamics of the accident, more than 7 years later. Some 3 millions people were directly affected in their everyday life by the post-accident management which resulted in many perverse effects on the social and psychic levels. Economically, each year, financing of the post-accident management system requires nearly 1/6 of the Ukraine budget. Politically speaking, Chernobyl is still a major stake for the various actors of the institutional transition process underway since the disappearance of the soviet system. The article shows the systemic complexity of the local situation and the many explanatory factors (physical, sanitary, political, cultural, historical) at the origin of the post-accident dynamics. A systemic modelling of the interactions between these factors is presented. It makes it possible to better define the contributions of both accident and post-accident stages to the process that has led to the present situation. It shows out the close connections between the different accident stages and the need, from the very beginning of an accident, to take into account the mid-and long-term consequences arising from the accident management. (author). 11 refs., 3 figs

  15. Reactor safety study. An assessment of accident risks in U. S. commercial nuclear power plants. Executive summary: main report. [PWR and BWR

    Energy Technology Data Exchange (ETDEWEB)

    1975-10-01

    Information is presented concerning the objectives and organization of the reactor safety study; the basic concepts of risk; the nature of nuclear power plant accidents; risk assessment methodology; reactor accident risk; and comparison of nuclear risks to other societal risks.

  16. Metrological data and risk assessment in France during the Chernobyl accident (26 april 1986)

    International Nuclear Information System (INIS)

    Galle, P.; Paulin, R.; Coursaget, J.

    2005-01-01

    Three world famous radio biologists have presented in june 2003 a communication entitled ' metrological data and risk assessment in France during the Chernobyl accident. Historical statement'. This text is published at the tome 326, fsc. 8, page 699-715 at the 'Comptes Rendus de Biologie de l'Academie'. The digest is presented here. (N.C.)

  17. Selection of the important performance influencing factors for the assessment of human error under accident management situations in nuclear power plants

    International Nuclear Information System (INIS)

    Kim, J. H.; Jung, W. J.

    1999-01-01

    This paper introduces the process and final results of selection of the important Performance Influencing Factors (PIFs) under emergency operation and accident management situations in nuclear power plants for use in the assessment of human errors. We collected two types of PIF taxonomies, one is the full set PIF list mainly developed for human error analysis, and the other is the PIFs for human reliability analysis (HRA) in probabilistic safety assessment (PSA). 5 PIF taxonomies among the full set PIF list and 10 PIF taxonomies among HRA methodologies (CREAM, SLIM, INTENT, were collected in this research. By reviewing and analyzing PIFs selected for HRA methodologies, the criterion could be established for the selection of appropriate PIFs under emergency operation and accident management situations. Based on this selection criteria, a new PIF taxonomy was proposed for the assessment of human error under emergency operation and accident management situations in nuclear power plants

  18. AP600 large-break loss-of-collant-accident developmental assessment plan for TRAC-PF1/MOD2

    International Nuclear Information System (INIS)

    Knight, T.D.

    1996-07-01

    The Westinghouse AP600 reactor is an advanced pressurized water reactor with passive safety systems to protect the plant against possible accidents and transients. The design has been submitted to the U.S. NRC for design certification. The NRC has selected the Transient Reactor Analysis Code (TRAC)-PF1/MOD2 for performing large break loss-of coolant-accident (LBLOCA) analysis to support the certification effort. This document defines the tests to be used in the current phase of developmental assessment related to AP600 LBLOCA

  19. Rapid Assessment of Anthropogenic Impacts of Exposed Sandy ...

    African Journals Online (AJOL)

    We applied a rapid assessment methodology to estimate the degree of human impact of exposed sandy beaches in Ghana using ghost crabs as ecological indicators. The use of size ranges of ghost crab burrows and their population density as ecological indicators to assess extent of anthropogenic impacts on beaches ...

  20. The 2010 Chile Earthquake: Rapid Assessments of Tsunami

    OpenAIRE

    Michelini, A.; Lauciani, V.; Selvaggi, G.; Lomax, A.

    2010-01-01

    After an earthquake underwater, rapid real-time assessment of earthquake parameters is important for emergency response related to infrastructure damage and, perhaps more exigently, for issuing warnings of the possibility of an impending tsunami. Since 2005, the Istituto Nazionale di Geofisica e Vulcanologia (INGV) has worked on the rapid quantification of earthquake magnitude and tsunami potential, especially for the Mediterranean area. This work includes quantification of earthquake size fr...

  1. Complementary safety assessment in the light of the Fukushima accident - Laue Langevin Institute

    International Nuclear Information System (INIS)

    Desbriere; Caillot; Bidet

    2012-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Grenoble High Flux reactor to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. Robustness is the ability for the facility to withstand events beyond the level for which the facility was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence (cliff edge effect). Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like crisis organization and work organization via subcontracting are also taken into consideration. This report is divided into 9 main chapters: 1) main features of the high flux reactor, 2) macroscopic study of safety, identification of structures and equipment essential to safety, 3) earthquake risk, 4) flood risk, 5) risks due to other extreme natural disasters, 6) the loss of electrical power supplies and of cooling systems, 7) management of severe accidents, 8) subcontracting policy, 9) synthesis and improvements. This study confirms the robustness of the facility and a series of improvements and modifications is proposed to face very unlikely situations (especially plurality of failures) that were not taken into account in baseline safety studies. (A.C.)

  2. Assessment of risks of accidents and normal operation at nuclear power plants

    International Nuclear Information System (INIS)

    Savolainen, Ilkka; Vuori, Seppo.

    1977-01-01

    A probabilistic assessment model for the analysis of risks involved in the operation of nuclear power plants is described. With the computer code ARANO it is possible to estimate the health and economic consequences of reactor accidents both in probabilistic and deterministic sense. In addition the code is applicable to the calculation of individual and collective doses caused by the releases during normal operation. The estimation of release probabilities and magnitudes is not included in the model. (author)

  3. Using MARS to assist in managing a severe accident

    International Nuclear Information System (INIS)

    Raines, J.C.; Hammersley, R.J.; Henry, R.E.

    2004-01-01

    During an accident, information about the current and possible future states of the plant provides guidance for accident managers in evaluating which actions should be taken. However, depending upon the nature of the accident and the stress levels imposed on the plant staff responding to the accident the current and future plant assessments may be very difficult or nearly impossible to perform without supplemental training and/or appropriate tools. The MAAP Accident Response System (MARS) has been developed as a calculational aid to assist the responsible accident management individuals. Specifically MARS provides additional insights on the current and possible future states of the plant during an accident including the influence of operator actions. In addition to serving as a calculational aid, the MARS software can be an effective means for providing supplemental training. The MARS software uses engineering calculations to perform an integral assessment of the plant status including a consistency assessment of the available instrumentation. In addition, it uses the Modular Accident Analysis Program (MAAP) to provide near term predictions of the plant response if corrective actions are taken. This paper will discuss the types of information that are beneficial to the accident manager and how MARS addresses each. The MARS calculational functions include: instrumentation, validation and simulation, projected operator response based on the EOPs, as well as estimated timing and magnitude of in-plant and off-site radiation dose releases. Each of these items is influential in the management of a severe accident. (author)

  4. Assessment of the radiological risks of road transport accidents involving Type A packages

    International Nuclear Information System (INIS)

    Lange, F.; Fett, H.J.; Schwarz, G.; Raffestin, D.; Schneider, T.; Gelder, R.; S. Hughes, J.; B. Shaw, K.; Hedberg, B.; Simenstad, P.; Svahn, B.; Heinen, J.F.A. van; Jansma, R.

    2001-01-01

    An assessment and evaluation of the potential radiological risks of transport accidents involving Type A package shipments by road have been performed by five EU Member States, France, Germany, Sweden, The Netherlands, and the UK. The analysis involved collection and analysis of information on a national basis related to the type, volume, and characteristics of Type A package consignments, the associated radioactive traffic, and the expected frequency and consequences of potential vehicular road transport accidents. It was found that the majority of Type A packaged radioactive material shipments by road is related to applications of non-special form radioactive material, i.e. radiopharmaceuticals, radiochemicals etc., in medicine, research, and industry and special form material contained in radiography and other radiation sources, e.g. gauging equipment. The annual volumes of Type A package shipments of radiopharmaceuticals and radiochemicals by road differ considerably between the participating EU Member States from about 12,000 Type A packages in Sweden to about 240,000 in the Netherlands. The broad range reflects to a large extent the supply of radioactive material for the national populations and the production and distribution operations prevailing in the participating EU Member States (some are producer countries, others are not!). Very few standard package designs weighing from about 1-25 kg are predominant in Type A package shipments in all participating countries. Type A packages contain typically a range of radioactivity from a few mega becquerels to a few tens of giga becquerels, the average package activity contents is in terms of fractions of A 2 about 0.01, i.e. about one hundredth of a Type A package contents limits. Based on a probabilistic risk assessment method it has been concluded that the expected frequencies of occurrence of vehicular road transport accidents with the potential to result in an environmental release - including radiologically

  5. Accidents cutting and piercing in a School of Dentistry

    Directory of Open Access Journals (Sweden)

    Maria Cristina Zindel Deboni

    2010-04-01

    Full Text Available Objective: To assess the occurrence and characteristics of the reported accidents with perforating-cutting materials involving students, staff and faculty members, between 2000 and 2005 at the Dental Clinic of the School of Dentistry of the University of São Paulo. Methods: A survey of the records of reported occurrences of accidents was made, considering the material that caused the accident, time of day of the occurrence, the discipline in which it occurred, and clinical conduct adopted in the emergency room. When available, the results of the laboratory exams of the accident victim and the source patient were also taken into consideration. Results: The data assessed showed there were 40 accident reports, of which 39 reports involved undergraduate students and 1 staff member. The instrument that caused most accidents was the anesthetic needle and largest number of these accidents occurred in the Surgery discipline. However, 50% of the records did not present complete information, which prevented a more accurate epidemiological assessment. Conclusion: The data obtained led to the conclusion that the rate of accidents is extremely low considering the number of clinical attendances provided in the period and raises the hypothesis that many cases were not reported.

  6. Learning Lessons from TMI to Fukushima and Other Industrial Accidents: Keys for Assessing Safety Management Practices

    International Nuclear Information System (INIS)

    Dechy, N.; Rousseau, J.-M.; Dien, Y.; Montmayeul, R.; Llory, M.

    2016-01-01

    The main objective of the paper is to discuss and to argue about transfer, from an industrial sector to another industrial sector, of lessons learnt from accidents. It will be achieved through the discussion of some theoretical foundations and through the illustration of examples of application cases in assessment of safety management practices in Nuclear Power Plant (NPP). The nuclear energy production industry has faced three big ones in 30 years (TMI, Chernobyl, Fukushima) involving three different reactor technologies operated in three quite different cultural, organizational and regulatory contexts. Each of those accident has been the origin of questions, but also generator of lessons, some changing the worldview (see Wilpert and Fahlbruch, 1998) of what does cause an accident in addition to the engineering view about the importance of technical failures (human error, safety culture, sociotechnical interactions). Some of their main lessons were implemented such as improvements of human-machine interfaces ergonomics, recast of some emergency operating procedures, severe accident mitigation strategies and crisis management. Some lessons did not really provide deep changes. It is the case for organizational lessons such as, organizational complexity, management of production pressures, regulatory capture, and failure to learn, etc.

  7. [Risk assessment expanded accident insurance for children].

    Science.gov (United States)

    Sittaro, N A

    1998-08-01

    Disability is a well known and tragic event for children. While adults are an established group for specific disability insurance cover, children were often neglected in the past. Although parents, organizations and paediatricans are aware of the risk, children specific incidence rates for disability are hardly available. The only sufficient source for some statistical data are the accident statistics because they represent a substantial group of specific cause related disability for children. Incidence rates for disease related chronic severe impairment or disability in children are either derived by single disease research or actuarial calculation of the German Social Disability Registration. Based on this statistical background, an extended accident insurance for children was introduced in Germany covering both accidents and disabling diseases. The key limitation for all variations of this insurance are exclusion clauses for congential diseases and mental disorders. This insurance requires a new approach in underwriting of the health risks. Because of the substantial number of impaired children, a simple decline of substandard cases are unacceptable. The early experience or medical underwriting shows predominantly health impairments of the following types: allergies, bronchial asthma, ectopic eczema (neurodermitis), disorders of speech and articulation, vision disorders and mental impairments. The suggested solution for underwriting of substandard risks is the predetermination of the possible future maximum degree of disability. The need for underwriting guidelines is supported by the market impact of the new disability cover with thousands of insurance policies issued in the first month after introduction.

  8. Accident consequence assessments with different atmospheric dispersion models

    International Nuclear Information System (INIS)

    Panitz, H.J.

    1989-11-01

    An essential aim of the improvements of the new program system UFOMOD for Accident Consequence Assessments (ACAs) was to substitute the straight-line Gaussian plume model conventionally used in ACA models by more realistic atmospheric dispersion models. To identify improved models which can be applied in ACA codes and to quantify the implications of different dispersion models on the results of an ACA, probabilistic comparative calculations with different atmospheric dispersion models have been performed. The study showed that there are trajectory models available which can be applied in ACAs and that they provide more realistic results of ACAs than straight-line Gaussian models. This led to a completely novel concept of atmospheric dispersion modelling in which two different distance ranges of validity are distinguished: the near range of some ten kilometres distance and the adjacent far range which are assigned to respective trajectory models. (orig.) [de

  9. About the causes and circumstances of the Chernobyl NPP accident

    International Nuclear Information System (INIS)

    Shteynberg, N.

    1992-01-01

    The Chernobyl accident is the product of unsatisfactory solutions to scientific-technical, socio-economic and human problems. The documentarily recorded power excursion of the reactor and its rise velocity as well as the quick pressure rise in the separator drum admit the conclusion that the cause of the accident was the rapid power excursion of the reactor and not some external influence. (DG) [de

  10. Scientific aspects of the Tohoku earthquake and Fukushima nuclear accident

    Science.gov (United States)

    Koketsu, Kazuki

    2016-04-01

    We investigated the 2011 Tohoku earthquake, the accident of the Fukushima Daiichi nuclear power plant, and assessments conducted beforehand for earthquake and tsunami potential in the Pacific offshore region of the Tohoku District. The results of our investigation show that all the assessments failed to foresee the earthquake and its related tsunami, which was the main cause of the accident. Therefore, the disaster caused by the earthquake, and the accident were scientifically unforeseeable at the time. However, for a zone neighboring the reactors, a 2008 assessment showed tsunamis higher than the plant height. As a lesson learned from the accident, companies operating nuclear power plants should be prepared using even such assessment results for neighboring zones.

  11. The influence of chemistry on core melt accidents

    International Nuclear Information System (INIS)

    Liljenzin, J.O.

    1990-01-01

    Chemical reactions play an important role in assessing the safety of nuclear power plants. The main source of heat in the early stage of an accident is due to a chemical reaction between steam and the circonium encapsulating the nuclear fuel. The heating and melting of fuel leads to a release of fission products which rapidly condense to form particles suspended in the surrounding gas. These aerosols are the main carriers of radioactivity as they may transport active material from the reactor vessel into the reactor containment building where it is deposited. The content of fission products in the aerosol particles and their chemical form determine their interaction with water molecules. Chemical forces laed to an absorption of water in the particles which transforms them into droplets with increased mass. The particles become spherical and hence deposit more rapidly on surrounding surfaces. There is a rapid reaction between boron carbide and stainless steel in the control blades of boiling water reactors. There is only a small formation of boric acid. This leads to a smaller formation of volatile iodine compounds. But the alloying process is likely to cause melting of the control blades so the are removed from the reactor core, a process which may have negative secondary effects. It has been found that a series of materials that are present in the reactor containment are likely to participate in various chemical reactions during an accident. Among these are electric cables, motors, thermal insulation, surface coatings and sheet metal. Metallic surface coatings and sheet metal can be some of the main sources of hydrogen. Effects from chemical reactions can be more accurately predicted by the new SHMAPP code, developed within this project, combining thermal, hydraulic and chemical phenomena. (AB)

  12. Probabilistic risk assessment (PRA) update in light of the accident at Fukushima Daiichi Nuclear Power Station - 15461

    International Nuclear Information System (INIS)

    Maeda, K.; Abe, H.; Hirokawa, N.; Satou, C.

    2015-01-01

    We have performed internal and external event probabilistic risk assessments (PRA) for boiling water reactor power nuclear plants to identify the important accident sequence groups and to evaluate the effectiveness of the additional severe accident measures, regarding to the new regulatory requirements implemented after the accident at Fukushima Daiichi Nuclear Power Station in Japan in 2011. In addition, we will further update our PRA by extracting problems and improvements from the current PRA, by catching up the state-of-the-art knowledge, modern PRA methodologies in order to contribute voluntarily to safety improvement as well as to comply with regulations. In this document, prior to the extensive PRA updates, we would describe technical contents and qualitative results about PRA updates that have been performed preliminary so far, especially about the external event (seismic) PRA and how to model the additionally deployed severe accident measures (e.g. power supply car, fire engine) so that they can be function external hazards, such as component failure rate of equipment, human reliability 'out of control room', and mission time extension. (authors)

  13. Assessment of PASS Effectiveness under Severe Accidents in Nuclear Power Plants

    International Nuclear Information System (INIS)

    Choi, Yu Jung; Lee, Sung Bok; Kim, Hyeong Taek; Lee, Jin Yong

    2008-01-01

    Following the accident at Three Mile Island Unit 2 (TMI-2) on March 28, 1979, the USNRC formed a lessons-learned Task Force to identify and evaluate safety concerns originating with the TMI-2 accident. NUREG-0578 documented the results of the task force effort. One of the recommendations of the task force was for licensees to upgrade the capability to obtain samples from the reactor coolant system and containment atmosphere under high radioactivity conditions and to provide the capability for chemical and spectral analyses of high-level samples on site. NUREG-0737 contained the details of the TMI recommendations that were to be implemented by the licensees. Additional criteria for post accident sampling system(PASS) were issued by Regulatory Guide 1.97. As the results, PASS has been installed on nuclear power plants(NPPs) in Korea as well as United States. However, significant improvements have been achieved since the TMI-2 accident in the areas of understanding risks associated with nuclear plant operations and developing better strategies for managing the response to potential severe accidents at NPPs. Thus, the requirements for PASS have been re-evaluated in some reports. According to the reports, the samples and measurements from PASS do not contribute significantly to emergency management response to severe accidents due to the long analyzing time, 3 hours. Hence, this paper focused on the development of the quantitative analysis methodology to analyze the sequence of the severe accident in Yonggwang nuclear power plants (YGN) and presented the results of the analysis according to the developed methodology

  14. Safety apparatus for serious radioactive accidents (1962); Materiel d'intervention en cas d'accident radioactif grave (1962)

    Energy Technology Data Exchange (ETDEWEB)

    Estournel, R; Rodier, J [Commissariat a l' Energie Atomique, Centre de Production de Plutonium, Marcoule (France). Centre d' Etudes Nucleaires

    1962-07-01

    In the case of a serious radioactive accident, radioactive dust and gases may be released into the atmosphere. It is therefore necessary to be able to evaluate rapidly the importance of the risk to the surrounding population, and to be able to ensure, even in the event of an evacuation of the Centre, the continuation of the radioactivity analyses and the decontamination of the personnel. For this, the Anti-radiation Protection Service at Marcoule has organised mobile detection teams and designed a mobile laboratory and a mobile shower-unit. After describing the duty of the mobile teams, the report gives a description of the apparatus which would be used at the Marcoule Centre in the case of a serious radioactive accident. The method of using this apparatus is given. (authors) [French] Lors d'un accident radioactif grave, des poussieres et des gaz radioactifs peuvent etre relaches dans l'atmosphere. II est alors indispensable d'evaluer rapidement l'importance du risque couru par les populations environnantes, et de pouvoir assurer, meme dans le cas de l'evacuation du Centre, la poursuite des analyses radioactives et la decontamination du personnel. Pour cela, le Service de Protection contre les Radiations du Centre de Marcoule a mis sur pied des equipes mobiles de detection et realise une semi-remorque laboratoire ainsi qu'une semi-remorque douches. Apres avoir defini la mission des equipes mobiles, le rapport donne la description du materiel d'intervention qui serait mis en oeuvre par le Centre de Marcoule dans le cas d'un accident radioactif grave. Il precis le mode d'utilisation de ce materiel. (auteurs)

  15. [Labor accidents involving the eyes: assessment of occupational risks involving nursing workers].

    Science.gov (United States)

    de Almeida, Cristiana Brasil; Pagliuca, Lorita Marlena Freitag; Leite, Ana Lourdes Almeida e Silva

    2005-01-01

    The study aimed at identifying nursing workers who were victims of eye accidents and the type of accident; describing the measures taken and proposing Health Education methods. A descriptive and exploratory study was carried out at a public maternity hospital from September 2002 to January 2003. Data were collected through direct observation of the environment and interviews with workers. Subjects were ten professionals (one nurse, two technicians and seven nursing auxiliaries) who were victims of work accidents involving the eye. The accidents were grouped according to the type of material that caused the trauma: chemical substances (4), medication (3), mechanical trauma (1), scalp (1) and urine (1). The results reveal that hospital workers are vulnerable to labor accidents because the environment presents biological, chemical and physical risks. An important step to prevent the occurrence of new accidents would be the prevention of human mistakes through permanent training and the use of protection glasses.

  16. Reconfigurable mobile manipulation for accident response

    International Nuclear Information System (INIS)

    Anderson, Robert J.; Morse, William D.; Shirey, David L.; Cdebaca, DanielL M.; Hoffman, John P. Jr.; Lucy, William E.

    2000-01-01

    The need for a telerobotic vehicle with hazard sensing and integral manipulation capabilities has been identified for use in transportation accidents where nuclear weapons are involved. The Accident Response Mobile Manipulation System (ARMMS) platform has been developed to provide remote dexterous manipulation and hazard sensing for the Accident Response Group (ARG) at Sandia National Laboratories. The ARMMS' mobility platform is a military HMMWV [High Mobility Multipurpose Wheeled Vehicle] that is teleoperated over RF or Fiber Optic communication channels. ARMMS is equipped with two high strength Schilling Titan II manipulators and a suite of hazardous gas and radiation sensors. Recently, a modular telerobotic control architecture call SMART (Sandia Modular Architecture for Robotic and Teleoperation) has been applied to ARMMS. SMART enables input devices and many system behaviors to be rapidly configured in the field for specific mission needs. This paper summarizes current SMART developments applied to ARMMS

  17. Millennium Ecosystem Assessment: MA Rapid Land Cover Change

    Data.gov (United States)

    National Aeronautics and Space Administration — The Millennium Ecosystem Assessment: MA Rapid Land Cover Change provides data and information on global and regional land cover change in raster format for...

  18. Passive depressurization accident management strategy for boiling water reactors

    International Nuclear Information System (INIS)

    Liu, Maolong; Erkan, Nejdet; Ishiwatari, Yuki; Okamoto, Koji

    2015-01-01

    Highlights: • We proposed two passive depressurization systems for BWR severe accident management. • Sensitivity analysis of the passive depressurization systems with different leakage area. • Passive depressurization strategies can prevent direct containment heating. - Abstract: According to the current severe accident management guidance, operators are required to depressurize the reactor coolant system to prevent or mitigate the effects of direct containment heating using the safety/relief valves. During the course of a severe accident, the pressure boundary might fail prematurely, resulting in a rapid depressurization of the reactor cooling system before the startup of SRV operation. In this study, we demonstrated that a passive depressurization system could be used as a severe accident management tool under the severe accident conditions to depressurize the reactor coolant system and to prevent an additional devastating sequence of events and direct containment heating. The sensitivity analysis performed with SAMPSON code also demonstrated that the passive depressurization system with an optimized leakage area and failure condition is more efficient in managing a severe accident

  19. Passive depressurization accident management strategy for boiling water reactors

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Maolong, E-mail: liuml@vis.t.u-tokyo.ac.jp [Department of Nuclear Engineering and Management, School of Engineering, The University of Tokyo (Japan); Erkan, Nejdet [Nuclear Professional School, School of Engineering, The University of Tokyo (Japan); Ishiwatari, Yuki [Department of Nuclear Engineering and Management, School of Engineering, The University of Tokyo (Japan); Hitachi-GE Nuclear Energy, Ltd. (Japan); Okamoto, Koji [Nuclear Professional School, School of Engineering, The University of Tokyo (Japan)

    2015-04-01

    Highlights: • We proposed two passive depressurization systems for BWR severe accident management. • Sensitivity analysis of the passive depressurization systems with different leakage area. • Passive depressurization strategies can prevent direct containment heating. - Abstract: According to the current severe accident management guidance, operators are required to depressurize the reactor coolant system to prevent or mitigate the effects of direct containment heating using the safety/relief valves. During the course of a severe accident, the pressure boundary might fail prematurely, resulting in a rapid depressurization of the reactor cooling system before the startup of SRV operation. In this study, we demonstrated that a passive depressurization system could be used as a severe accident management tool under the severe accident conditions to depressurize the reactor coolant system and to prevent an additional devastating sequence of events and direct containment heating. The sensitivity analysis performed with SAMPSON code also demonstrated that the passive depressurization system with an optimized leakage area and failure condition is more efficient in managing a severe accident.

  20. Application of forensic image analysis in accident investigations.

    Science.gov (United States)

    Verolme, Ellen; Mieremet, Arjan

    2017-09-01

    Forensic investigations are primarily meant to obtain objective answers that can be used for criminal prosecution. Accident analyses are usually performed to learn from incidents and to prevent similar events from occurring in the future. Although the primary goal may be different, the steps in which information is gathered, interpreted and weighed are similar in both types of investigations, implying that forensic techniques can be of use in accident investigations as well. The use in accident investigations usually means that more information can be obtained from the available information than when used in criminal investigations, since the latter require a higher evidence level. In this paper, we demonstrate the applicability of forensic techniques for accident investigations by presenting a number of cases from one specific field of expertise: image analysis. With the rapid spread of digital devices and new media, a wealth of image material and other digital information has become available for accident investigators. We show that much information can be distilled from footage by using forensic image analysis techniques. These applications show that image analysis provides information that is crucial for obtaining the sequence of events and the two- and three-dimensional geometry of an accident. Since accident investigation focuses primarily on learning from accidents and prevention of future accidents, and less on the blame that is crucial for criminal investigations, the field of application of these forensic tools may be broader than would be the case in purely legal sense. This is an important notion for future accident investigations. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. The Thule accident: Assessment of radiation doses from terrestrial radioactive contamination

    International Nuclear Information System (INIS)

    Ulbak, K.

    2011-12-01

    Risoe DTU has carried out research on the terrestrial contamination in the Thule area after the radioactive contents of four nuclear weapons were dispersed following the crash of an American B-52 bomber in 1968. The results of Risoe DTU's studies are described in the report Thule-2007 - Investigation of radioactive pollution on land, which covers all measurements that were carried out on land in Thule in the years 2003, 2006, 2007 and 2008. The present report uses Risoe DTU's report as a basis for assessing radiation doses and consequently the risk for individuals as a result of terrestrial radioactive contamination in the Thule area. The assessment of radiation doses involves a number of conservative assumptions, estimates, and measurements, all of which are subject to considerable uncertainty. In some cases, models have been used based on experiences from other contaminated areas elsewhere in the world, which are subject to climatic and other conditions that diverge from those in the Thule area. The calculated doses are thus associated with considerable uncertainty, which must be taken into account when the results are used for comparison and when the risks of staying in the Thule area are assessed. It has therefore been chosen to provide the assessed radiation doses in the form of indicative orders of magnitude, which are applicable to everyone who might stay in the area, across various age groups. If the estimated doses in this report are combined with the National Institute of Radiation Protections recommended reference level for contamination as a result of the Thule Accident of 1 mSv/year, the assessed magnitudes of radiation doses for inhalation and ingestion as exposure pathways are many orders of magnitude below the reference level (10,00010 million times smaller). The wound contamination exposure pathway has a magnitude of radiation dose that is smaller than the reference level by a factor of 101000, and it should be recalled that the probability of this

  2. The Thule accident: Assessment of radiation doses from terrestrial radioactive contamination

    Energy Technology Data Exchange (ETDEWEB)

    Ulbak, K. (National Institute of Radiation Protection, Herlev (Denmark))

    2011-12-15

    Risoe DTU has carried out research on the terrestrial contamination in the Thule area after the radioactive contents of four nuclear weapons were dispersed following the crash of an American B-52 bomber in 1968. The results of Risoe DTU's studies are described in the report Thule-2007 - Investigation of radioactive pollution on land, which covers all measurements that were carried out on land in Thule in the years 2003, 2006, 2007 and 2008. The present report uses Risoe DTU's report as a basis for assessing radiation doses and consequently the risk for individuals as a result of terrestrial radioactive contamination in the Thule area. The assessment of radiation doses involves a number of conservative assumptions, estimates, and measurements, all of which are subject to considerable uncertainty. In some cases, models have been used based on experiences from other contaminated areas elsewhere in the world, which are subject to climatic and other conditions that diverge from those in the Thule area. The calculated doses are thus associated with considerable uncertainty, which must be taken into account when the results are used for comparison and when the risks of staying in the Thule area are assessed. It has therefore been chosen to provide the assessed radiation doses in the form of indicative orders of magnitude, which are applicable to everyone who might stay in the area, across various age groups. If the estimated doses in this report are combined with the National Institute of Radiation Protection's recommended reference level for contamination as a result of the Thule Accident of 1 mSv/year, the assessed magnitudes of radiation doses for inhalation and ingestion as exposure pathways are many orders of magnitude below the reference level (10,000-10 million times smaller). The wound contamination exposure pathway has a magnitude of radiation dose that is smaller than the reference level by a factor of 10-1000, and it should be recalled that the

  3. An initial assessment of the Chernobyl-4 reactor accident release source

    International Nuclear Information System (INIS)

    Macdonald, H.F.; ApSimon, H.M.; Wilson, J.J.N.

    1986-07-01

    The long-range atmospheric dispersion model MESOS has been used to provide a preliminary evaluation of the effects over Western Europe of radioactivity released during the accident which occurred at the Chernobyl-4 reactor in the USSR in April 1986. The results of this analysis have been compared with observations during the first week or so following the accident of airborne contamination levels at a range of locations across Europe in order to obtain an estimate of accident release source. The work presented here was performed during the 6-8 weeks following the accident and the results obtained will be subject to refinement as more detailed data become available. However, at this early stage they indicate a release source for the Chernobyl accident, expressed as a fraction of the estimated reactor core inventory, of approx. 15-20% of the iodine and caesium isotopes, approx. 1% of the ruthenium and lesser amounts of the other fission products and actinides, together with an implied major fraction of the krypton and xenon noble gases. (author)

  4. ROAD ACCIDENT AND SAFETY STUDY IN SYLHET REGION OF BANGLADESH

    Directory of Open Access Journals (Sweden)

    B. K. BANIK

    2011-08-01

    Full Text Available Roads, highways and streets are fundamental infrastructure facilities to provide the transportation for passenger travel and goods movement from one place to another in Sylhet, north–eastern division of Bangladesh with rapid growth of road vehicle, being comparatively developed economic tourist prone area faces severe road traffic accident. Such severe road accidents cause harsh safety hazards on the roads of Sylhet area. This research work presents an overview of the road traffic accident and degraded road safety situation in Sylhet zone which in particular, discusses the key road accident problem characteristics identifying the hazardous roads and spots, most responsible vehicles and related components, conditions of drivers and pedestrians, most victims of accident, effects of accident on society, safety priorities and options available in Sylhet. In this regard, a comprehensive questionnaire survey was conducted on the concerned groups of transportation and detailed accident data was collected from a popular local newspaper. Analysis of the study reveals that Dhaka- Sylhet highway is the most hazardous in road basis and Sylhet Sador thana is the most vulnerable in thana basis in Sylhet region.

  5. The Radiological Accident in Lia, Georgia

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2014-12-15

    The use of radioactive material offers a wide range of benefits to medicine, research and industry throughout the world. Precautions are necessary, however, to limit the exposure of people to the radiation emitted. Where the amount of radioactive material is substantial, as in the case of radiotherapy or industrial radiography sources, great care is required to prevent accidents which could have severe consequences. Nevertheless, in spite of the precautions taken, serious accidents involving radiation sources continue to occur, albeit infrequently. The IAEA conducts follow-up reviews of such serious accidents to provide an account of their circumstances and consequences, from which organizations with responsibilities for radiation protection, safety of sources and emergency preparedness and response may learn. A serious radiological accident occurred in Georgia on 2 December 2001, when three inhabitants of the village of Lia found two metal objects in the forest while collecting firewood. These objects were {sup 90}Sr sources with an activity of 1295 TBq. The three inhabitants used the objects as heaters when spending the night in the forest. The major cause of the accident was the improper and unauthorized abandonment of radiation sources in Georgia and the absence of clear labels or radiation signs on the sources warning of the potential radiation hazard. Under the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency (Assistance Convention), the Georgian authorities requested assistance from the IAEA to advise on the dose assessment, source recovery and medical management of those involved in the accident. This publication describes the circumstances and events surrounding the accident, its management and the medical treatment of the people exposed. It also describes the dose reconstruction calculations and biodosimetry assessments conducted. A number of uncertainties remain relating to some details of the accident. However

  6. The Radiological Accident in Lia, Georgia

    International Nuclear Information System (INIS)

    2014-12-01

    The use of radioactive material offers a wide range of benefits to medicine, research and industry throughout the world. Precautions are necessary, however, to limit the exposure of people to the radiation emitted. Where the amount of radioactive material is substantial, as in the case of radiotherapy or industrial radiography sources, great care is required to prevent accidents which could have severe consequences. Nevertheless, in spite of the precautions taken, serious accidents involving radiation sources continue to occur, albeit infrequently. The IAEA conducts follow-up reviews of such serious accidents to provide an account of their circumstances and consequences, from which organizations with responsibilities for radiation protection, safety of sources and emergency preparedness and response may learn. A serious radiological accident occurred in Georgia on 2 December 2001, when three inhabitants of the village of Lia found two metal objects in the forest while collecting firewood. These objects were 90 Sr sources with an activity of 1295 TBq. The three inhabitants used the objects as heaters when spending the night in the forest. The major cause of the accident was the improper and unauthorized abandonment of radiation sources in Georgia and the absence of clear labels or radiation signs on the sources warning of the potential radiation hazard. Under the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency (Assistance Convention), the Georgian authorities requested assistance from the IAEA to advise on the dose assessment, source recovery and medical management of those involved in the accident. This publication describes the circumstances and events surrounding the accident, its management and the medical treatment of the people exposed. It also describes the dose reconstruction calculations and biodosimetry assessments conducted. A number of uncertainties remain relating to some details of the accident. However, sufficient

  7. Investigation of Qom Rural Area Water Network Accident in 2010 and Minimization Approaches of Accident Frequencies

    Directory of Open Access Journals (Sweden)

    Hossein Jafari Mansoorian

    2016-02-01

    Full Text Available Background & Aims of the Study : Accidents in water networks can lead to increase the uncounted water, costs of repair, maintenance, restoration and enter water contaminants to water network. The aim of this study is to survey the accidents of Qom rural water network and choose the right approaches to reduce the number of accidents. Materials & Methods: In this cross-sectional study, four sector of Qom province (Markazi, Dastjerd, Kahak and Qahan, were assessed over a period of 8 months (July – January 2010. This study was conducted through questionnaire of Ministry of Energy. Results: The total number of accidents was 763. The highest number of accidents in the four sectors was related to Markazi sector with 228 accidents. According to the time of the accident, the highest and lowest number of accident was related to September (19.7% and November (6.8%, respectively. According to the location of the accident on network, the highest and lowest number of accident was related to distribution network (64% and connections (17.5% and transmission pipe (18.34%, respectively. According to the type of the accident, the highest and lowest number of accident was related to breaking (47.8% and gasket failure (1.2%, respectively. Considering with the pipes’ material, the highest and lowest number of accident was related to polyethylene pipes (93% and steel and cast iron pipes (0.5%, 0.5%, respectively. Conclusions: Due to the high break rate of Polyethylene pipes, it is recommended to be placed in priority of leak detection and rehabilitation.   .

  8. STUDY OF ROAD TRAFFIC ACCIDENTS WITH SPECIAL REFERENCE TO THE ACCIDENT VICTIMS ADMITTED IN GAUHATI MEDICAL COLLEGE AND HOSPITAL, ASSAM

    Directory of Open Access Journals (Sweden)

    Rocket Chandra

    2016-05-01

    Full Text Available BACKGROUND In the present scenario, road traffic accidents have become a major cause of human mortality and morbidity. Accidents are increasing at alarming rates in India. The objective of our study was to assess the socio-demographic profile of road traffic accident victims admitted in a tertiary care setting, and to assess the pattern of injuries. METHODOLOGY The present study is prospective and analytical hospital based study. RESULTS The present studies show that more than 70% of the victims are in the age group of below 45 years (n=3196 and with male preponderance. Out of 14364 accident patients visiting the emergency department of Gauhati Medical College and Hospital, 4953 patients were admitted. The majorities of the patients (n=2995 were admitted in surgery department and 1586 in orthopaedic department. CONCLUSIONS Several factors are responsible for causing road accidents such as drunk driving, lack of awareness of traffic rules, nonadherence to safety measures. To reduce morbidity and mortality following road accidents, comprehensive policy has to be adopted by the government

  9. JAERI's activities in JCO accident

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-09-01

    The Japan Atomic Energy Research Institute (JAERI) was actively involved in a variety of technical supports and cooperative activities, such as advice on terminating the criticality condition, contamination checks of the residents and consultation services for the residents, as emergency response actions to the criticality accident at the uranium processing facility operated by the JCO Co. Ltd., which occurred on September 30, 1999. These activities were carried out in collaborative ways by the JAERI staff from the Tokai Research Establishment, Naka Fusion Research Establishment, Oarai Research Establishment, and Headquarter Office in Tokyo. As well, the JAERI was engaged in the post-accident activities such as identification of accident causes, analyses of the criticality accident, and dose assessment of exposed residents, to support the Headquarter for Accident Countermeasures of the Science and Technology Agency (STA), the Accident Investigation Committee and the Health Control Committee of the Nuclear Safety Commission of Japan (NSC). This report compiles the activities, that the JAERI has conducted to date, including the discussions on measures for terminating the criticality condition, evaluation of the fission number, radiation monitoring in the environment, dose assessment, analyses of criticality dynamics. (author)

  10. Rapid Assessment of Protected area Pressures and Threats in ...

    African Journals Online (AJOL)

    Regular evaluation of protected area operations can enable policy makers develop strategic responses to pervasive management problems. Pressures and threats in seven National Parks of the National Park Service (NPS) were therefore assessed using the Rapid Assessment and Prioritization of Protected Area ...

  11. CARNSORE: Hypothetical reactor accident study

    International Nuclear Information System (INIS)

    Walmod-Larsen, O.; Jensen, N.O.; Kristensen, L.; Meide, A.; Nedergaard, K.L.; Nielsen, F.; Lundtang Petersen, E.; Petersen, T.; Thykier-Nielsen, S.

    1984-06-01

    Two types of design-basis accident and a series of hypothetical core-melt accidents to a 600 MWe reactor are described and their consequences assessed. The PLUCON 2 model was used to calculate the consequences which are presented in terms of individual and collective doses, as well as early and late health consequences. The site proposed for the nucelar power station is Carnsore Point, County Wexford, south-east Ireland. The release fractions for the accidents described are those given in WASH-1400. The analyses are based on the resident population as given in the 1979 census and on 20 years of data from the meteorological stations at Rosslare Harbour, 8.5 km north of the site. The consequences of one of the hypothetical core-melt accidents are described in detail in a meteorological parametric study. Likewise the consequences of the worst conceivable combination of situations are described. Finally, the release fraction in one accident is varied and the consequences of a proposed, more probable ''Class 9 accident'' are presented. (author)

  12. Severe accident sequence assessment for boiling water reactors: program overview

    International Nuclear Information System (INIS)

    Fontana, M.H.

    1980-10-01

    The Severe Accident Sequence Assessment (SASA) Program was started at the Oak Ridge National Laboratory (ORNL) in June 1980. This report documents the initial planning, specification of objectives, potential uses of the results, plan of attack, and preliminary results. ORNL was assigned the Brown's Ferry Unit 1 Plant with the station blackout being the initial sequence set to be addressed. This set includes: (1) loss of offsite and onsite ac power with no coolant injection; and (2) loss of offsite and onsite ac power with high pressure coolant injection (HPCI) and reactor core isolation cooling (RCIC) as long as dc power supply lasts. This report includes representative preliminary results for the former case

  13. Radiological Consequence Analyses Following a Hypothetical Severe Accident in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Juyub; Kim, Juyoul [FNC Technology Co., Yongin (Korea, Republic of)

    2016-10-15

    In order to reflect the lessons learned from the Fukushima Daiichi nuclear power plant accident, a simulator which is named NANAS (Northeast Asia Nuclear Accident Simulator) for overseas nuclear accident has been developed. It is composed of three modules: source-term estimation, atmospheric dispersion prediction and dose assessment. For the source-term estimation module, the representative reactor types were selected as CPR1000, BWR5 and BWR6 for China, Japan and Taiwan, respectively. Considering the design characteristics of each reactor type, the source-term estimation module simulates the transient of design basis accident and severe accident. The atmospheric dispersion prediction module analyzes the transport and dispersion of radioactive materials and prints out the air and ground concentration. Using the concentration result, the dose assessment module calculates effective dose and thyroid dose in the Korean Peninsula region. In this study, a hypothetical severe accident in Japan was simulated to demonstrate the function of NANAS. As a result, the radiological consequence to Korea was estimated from the accident. PC-based nuclear accident simulator, NANAS, has been developed. NANAS contains three modules: source-term estimation, atmospheric dispersion prediction and dose assessment. The source-term estimation module simulates a nuclear accident for the representative reactor types in China, Japan and Taiwan. Since the maximum calculation speed is 16 times than real time, it is possible to estimate the source-term release swiftly in case of the emergency. The atmospheric dispersion prediction module analyzes the transport and dispersion of radioactive materials in wide range including the Northeast Asia. Final results of the dose assessment module are a map projection and time chart of effective dose and thyroid dose. A hypothetical accident in Japan was simulated by NANAS. The radioactive materials were released during the first 24 hours and the source

  14. Assessment of Neutronic Characteristics of Accident-Tolerant Fuel and Claddings for CANDU Reactors

    Directory of Open Access Journals (Sweden)

    Simon Younan

    2018-01-01

    Full Text Available The objective of this study was to evaluate accident-tolerant fuel (ATF concepts being considered for CANDU reactors. Several concepts, including uranium dioxide/silicon carbide (UO2-SiC composite fuel, dense fuels, microencapsulated fuels, and ATF cladding, were modelled in Serpent 2 to obtain reactor physics parameters, including important feedback parameters such as coolant void reactivity and fuel temperature coefficient. In addition, fuel heat transfer was modelled, and a simple accident model was tested on several ATF cases to compare with UO2. Overall, several concepts would require enrichment of uranium to avoid significant burnup penalties, particularly uranium-molybdenum (U-Mo and fully ceramic microencapsulated (FCM fuels. In addition, none of the fuel types have a significant advantage over UO2 in terms of overall accident response or coping time, though U-9Mo fuel melts significantly sooner due to its low melting point. Instead, the different ATF concepts appear to have more modest advantages, such as reduced fission product release upon cladding failure, or reduced hydrogen generation, though a proper risk assessment would be required to determine the magnitude of these advantages to weigh against economic disadvantages. The use of uranium nitride (UN enriched in N15 would increase exit burnup for natural uranium, providing a possible economic advantage depending on fuel manufacturing costs.

  15. Dose assessment method for control room habitability in accident condition in nuclear power plants

    International Nuclear Information System (INIS)

    Yang Dong; Tang Shaohua; Wang Jianhua

    2012-01-01

    Based on the NRC. technical requirements on NPP control room habitability assessment, and considering the characteristics of the improved second generation NPPs in China, this paper developed a complete dose assessment model for control room habitability. Contrasting to the existing model in China, this model is applicable for DBA and sever accident, and the short term atmospheric diffusion factor can be calculated using the combined wake mode. By considering the zoning of habitable area and the design characteristics of the ventilation system, the effects of un-filtrated air leakage from the building and the ventilation system on the assessment calculation can be considered. (authors)

  16. Accident management for severe accidents

    International Nuclear Information System (INIS)

    Bari, R.A.; Pratt, W.T.; Lehner, J.; Leonard, M.; Disalvo, R.; Sheron, B.

    1988-01-01

    The management of severe accidents in light water reactors is receiving much attention in several countries. The reduction of risk by measures and/or actions that would affect the behavior of a severe accident is discussed. The research program that is being conducted by the US Nuclear Regulatory Commission focuses on both in-vessel accident management and containment and release accident management. The key issues and approaches taken in this program are summarized. 6 refs

  17. The Nordic safety program on accident consequence assessment

    International Nuclear Information System (INIS)

    Tveten, U.

    1988-01-01

    One important part of Nordic cooperation is partially funded by the Nordic Council of Ministers, namely the work performed within the Nordic Safety Program (often referred to as the NKA projects). NKA is the Nordic abbreviation of the Nordic Liaison Committee on Atomic Energy. One program area in the present four-year period is concerned with problems related to reactor accident consequence assessment, and contains almost twenty projects covering a wide range of subjects. The author is program coordinator for this program area. The program will be completed in 1989. The program was strongly influenced by Chernobyl, and a number of new projects were included in the program in 1986. Involved in the program are these Nordic institutions: Riso National Laboratory (Denmark). Technical Research Centre of Finland. Finnish Centre for Radiation and Nuclear Safety. Finnish Meteorological Institute. Institute for Energy Technology (Norway). Agricultural University of Norway. Meteorological Institute of Norway. Studsvik Energiteknik AB (Sweden). National Defence Research Laboratory (Sweden)

  18. Reactor safety study. An assessment of accident risks in U.S. commercial nuclear power plants. Appendix I. Accident definition and use of event trees

    International Nuclear Information System (INIS)

    1975-10-01

    Information is presented concerning accident definition and use of event trees, event tree methodology, potential accidents covered by the reactor safety study, analysis of potential accidents involving the reactor core, and analysis of potential accidents not involving the core

  19. Vulnerability assessment of chemical industry facilities in South Korea based on the chemical accident history

    Science.gov (United States)

    Heo, S.; Lee, W. K.; Jong-Ryeul, S.; Kim, M. I.

    2016-12-01

    The use of chemical compounds are keep increasing because of their use in manufacturing industry. Chemical accident is growing as the consequence of the chemical use increment. Devastating damages from chemical accidents are far enough to aware people's cautious about the risk of the chemical accident. In South Korea, Gumi Hydrofluoric acid leaking accident triggered the importance of risk management and emphasized the preventing the accident over the damage reducing process after the accident occurs. Gumi accident encouraged the government data base construction relate to the chemical accident. As the result of this effort Chemical Safety-Clearing-house (CSC) have started to record the chemical accident information and damages according to the Harmful Chemical Substance Control Act (HCSC). CSC provide details information about the chemical accidents from 2002 to present. The detail informations are including title of company, address, business type, accident dates, accident types, accident chemical compounds, human damages inside of the chemical industry facilities, human damage outside of the chemical industry facilities, financial damages inside of the chemical industry facilities, and financial damages outside of the chemical industry facilities, environmental damages and response to the chemical accident. Collected the chemical accident history of South Korea from 2002 to 2015 and provide the spatial information to the each accident records based on their address. With the spatial information, compute the data on ArcGIS for the spatial-temporal analysis. The spatial-temporal information of chemical accident is organized by the chemical accident types, damages, and damages on environment and conduct the spatial proximity with local community and environmental receptors. Find the chemical accident vulnerable area of South Korea from 2002 to 2015 and add the vulnerable area of total period to examine the historically vulnerable area from the chemical accident in

  20. Metrological data and risk assessment in France during the Chernobyl accident. Historical statement

    International Nuclear Information System (INIS)

    Galle, P.; Paulin, R.; Coursaget, J.

    2003-01-01

    Metrological data and risk assessment in France during the Chernobyl accident. Historical statement. The authors indicate the origin of the data used by the French Public Health Authority in 1986 to estimate the risk of the radioactive fall out following the Chernobyl accident. The technical means developed in order to establish this data, and the precedent experience gained, are described. The principal results are given. The terms of the 28 May 1986 note to the Academy of Sciences by R. Latarjet, which concluded that the low level of this fallout did not justify any countermeasure, except the control of the imported food, are confirmed. Rational dispositions are required in order to improve the information of the population, referring to the Swedish model, which involves the intervention of the medical staff specialized in radio-toxicology, radio-pathology, nuclear medicine, and especially trained. To cite this article: P. Galle et al., C. R. Biologies 326 (2003). (authors)

  1. Real time analysis for atmospheric dispersions for Fukushima nuclear accident: Mobile phone based cloud computing assessment

    International Nuclear Information System (INIS)

    Woo, Tae Ho

    2014-01-01

    Highlights: • Possible nuclear accident is simulated for the atmospheric contaminations. • The simulations results give the relative importance of the fallouts. • The cloud computing of IT is performed successfully. • One can prepare for the possible damages of such a NPP accident. • Some other variables can be considered in the modeling. - Abstract: The radioactive material dispersion is investigated by the system dynamics (SD) method. The non-linear complex algorithm could give the information about the hazardous material behavior in the case of nuclear accident. The prevailing westerlies region is modeled for the dynamical consequences of the Fukushima nuclear accident. The event sequence shows the scenario from earthquake to dispersion of the radionuclides. Then, the dispersion reaches two cities in Korea. The importance of the radioactive dispersion is related to the fast and reliable data processing, which could be accomplished by cloud computing concept. The values of multiplications for the wind, plume concentrations, and cloud computing factor are obtained. The highest value is 94.13 in the 206th day for Seoul. In Pusan, the highest value is 15.48 in the 219th day. The source is obtained as dispersion of radionuclide multiplied by 100. The real time safety assessment is accomplished by mobile phone

  2. An analysis of the Three Mile Island accident

    International Nuclear Information System (INIS)

    Brooks, G.L.; Siddal, E.

    1980-09-01

    Starting with a systematic analysis of the chain of events that took place during the Three Mile Island accident, the authors assess the significance of the four distinct phases of the accident. Inferences that can be drawn with respect to the safety of CANDU reactors are discussed. A rational reaction to the accident is suggested, and several factors are shown not to have played an important part, contrary to public impressions. The authors point out that over-reaction to the accident could detract from public safety. The Canadian response to the accident is discussed. (auth)

  3. Thermo-physical properties of corium: development of an assessed data base for severe accident applications

    Energy Technology Data Exchange (ETDEWEB)

    Strizhov, V.F.; Galimov, R.G.; Ozrin, V.D. [Nuclear Safety Institute of the Russian Academy of Sciences, Moscow (Russian Federation); Yu Zitserman, V.; Kobzev, G.I.; Fokin, L.R. [Institute of high temperatures, Russian Academy of Sciences, Moscow (Russian Federation); Piluso, P. [CEA Cadarache (DEN/DTN/STRI), Lab. d' essais pour la Maitrise des Accidents graves, 13 - Saint Paul lez Durance (France); Chalaye, H. [CEA Saclay, Dir. de l' Energie Nucleaire, 91 - Gif sur Yvette (France)

    2007-07-01

    In a hypothetical case of a core melt-down scenarios a very high temperature would be reached (up to 3000 K). In this case, the materials of the core and structural materials (fuel, cladding, metallic alloys, concrete, etc.) could melt to form complex and aggressive mixtures called corium. Modelling of severe accident phenomena, code development and assessments of nuclear safety require a reliable knowledge of the thermophysical properties of corium at wide temperature range (below solidus temperature, between solidus and liquidus temperature and above the liquidus temperature). Common Russian-French project ISTC 3078, has been devoted to the development, assessment and recommendation for the establishment of a reliable thermophysical data base for severe accident applications. The project consists of two tasks related to properties of pure metallic (U, Zr, Fe, Cr, Ni) and oxide (UO{sub 2}, U{sub 3}O{sub 8}, U{sub 4}O{sub 9}, NiO, ZrO{sub 2}, Cr{sub 2}O{sub 3}, FeO, Fe{sub 2}O{sub 3}, Fe{sub 3}O{sub 4}, Al{sub 2}O{sub 3}, CaO, MgO, SiO{sub 2}, HfO{sub 2}, CeO{sub 2}) components, and mixtures relevant to severe accident conditions. Three categories of data (on UPAK classification) were considered: experimental data, critically evaluated data, and predicted data. The data of the first category is a result of specific experiment, data of the second category is a result of the analysis of data consistency and co-processing (expert and statistical) obtained in several experiments, data of the third category are based on model estimates, using correlations between different physical properties. The process of assessing, review and development of recommendation is described in the paper and illustrated by examples on thermophysical properties. (authors)

  4. Dynamic modeling of physical phenomena for probabilistic assessment of spent fuel accidents

    International Nuclear Information System (INIS)

    Benjamin, A.S.

    1997-01-01

    If there should be an accident involving drainage of all the water from a spent fuel pool, the fuel elements will heat up until the heat produced by radioactive decay is balanced by that removed by natural convection to air, thermal radiation, and other means. If the temperatures become high enough for the cladding or other materials to ignite due to rapid oxidation, then some of the fuel might melt, leading to an undesirable release of radioactive materials. The amount of melting is dependent upon the fuel loading configuration and its age, the oxidation and melting characteristics of the materials, and the potential effectiveness of recovery actions. The authors have developed methods for modeling the pertinent physical phenomena and integrating the results with a probabilistic treatment of the uncertainty distributions. The net result is a set of complementary cumulative distribution functions for the amount of fuel melted

  5. Severe accident analysis and management in nuclear fuel cycle facilities

    International Nuclear Information System (INIS)

    Golshan, Mina

    2013-01-01

    Within the UK regulatory regime, assessment of risks arising from licensee's activities are expected to cover both normal operations and fault conditions. In order to establish the safety case for fault conditions, fault analysis is expected to cover three forms of analysis: design basis analysis (DBA), probabilistic safety assessment (PSA) and severe accident analysis (SAA). DBA should provide a robust demonstration of the fault tolerance of the engineering design and the effectiveness of the safety measures on a conservative basis. PSA looks at a wider range of fault sequences (on a best estimate basis) including those excluded from the DBA. SAA considers significant but unlikely accidents and provides information on their progression and consequences, within the facility, on the site and off site. The assessment of severe accidents is not limited to nuclear power plants and is expected to be carried out for all plant states where the identified dose targets could be exceeded. This paper sets out the UK nuclear regulatory expectation on what constitutes a severe accident, irrespective of the type of facility, and describes characteristics of severe accidents focusing on nuclear fuel cycle facilities. Key rules in assessment of severe accidents as well as the relationship to other fault analysis techniques are discussed. The role of SAA in informing accident management strategies and offsite emergency plans is covered. The paper also presents generic examples of scenarios that could lead to severe accidents in a range of nuclear fuel cycle facilities. (authors)

  6. Severe accidents in Nuclear Power Plants

    International Nuclear Information System (INIS)

    Valle Cepero, R.; Castillo Alvarez, J.; Ramon Fuente, J.

    1996-01-01

    For the assessment of the safety of nuclear power plants it is of great importance the analyses of severe accidents since they allow to estimate the possible failure models of the containment, and also permit knowing the magnitude and composition of the radioactive material that would be released to the environment in case of an accident upon population and the environment. This paper presents in general terms the basic principles for conducting the analysis of severe accidents, the fundamental sources in the generation of radionuclides and aerosols, the transportation and deposition processes, and also makes reference to de main codes used in the modulation of severe accidents. The final part of the paper contents information on how severe accidents are dialed with the regulatory point view in different countries

  7. Accident sequence quantification with KIRAP

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Tae Un; Han, Sang Hoon; Kim, Kil You; Yang, Jun Eon; Jeong, Won Dae; Chang, Seung Cheol; Sung, Tae Yong; Kang, Dae Il; Park, Jin Hee; Lee, Yoon Hwan; Hwang, Mi Jeong

    1997-01-01

    The tasks of probabilistic safety assessment(PSA) consists of the identification of initiating events, the construction of event tree for each initiating event, construction of fault trees for event tree logics, the analysis of reliability data and finally the accident sequence quantification. In the PSA, the accident sequence quantification is to calculate the core damage frequency, importance analysis and uncertainty analysis. Accident sequence quantification requires to understand the whole model of the PSA because it has to combine all event tree and fault tree models, and requires the excellent computer code because it takes long computation time. Advanced Research Group of Korea Atomic Energy Research Institute(KAERI) has developed PSA workstation KIRAP(Korea Integrated Reliability Analysis Code Package) for the PSA work. This report describes the procedures to perform accident sequence quantification, the method to use KIRAP`s cut set generator, and method to perform the accident sequence quantification with KIRAP. (author). 6 refs.

  8. Industrial accidents triggered by lightning.

    Science.gov (United States)

    Renni, Elisabetta; Krausmann, Elisabeth; Cozzani, Valerio

    2010-12-15

    Natural disasters can cause major accidents in chemical facilities where they can lead to the release of hazardous materials which in turn can result in fires, explosions or toxic dispersion. Lightning strikes are the most frequent cause of major accidents triggered by natural events. In order to contribute towards the development of a quantitative approach for assessing lightning risk at industrial facilities, lightning-triggered accident case histories were retrieved from the major industrial accident databases and analysed to extract information on types of vulnerable equipment, failure dynamics and damage states, as well as on the final consequences of the event. The most vulnerable category of equipment is storage tanks. Lightning damage is incurred by immediate ignition, electrical and electronic systems failure or structural damage with subsequent release. Toxic releases and tank fires tend to be the most common scenarios associated with lightning strikes. Oil, diesel and gasoline are the substances most frequently released during lightning-triggered Natech accidents. Copyright © 2010 Elsevier B.V. All rights reserved.

  9. Accident sequence quantification with KIRAP

    International Nuclear Information System (INIS)

    Kim, Tae Un; Han, Sang Hoon; Kim, Kil You; Yang, Jun Eon; Jeong, Won Dae; Chang, Seung Cheol; Sung, Tae Yong; Kang, Dae Il; Park, Jin Hee; Lee, Yoon Hwan; Hwang, Mi Jeong.

    1997-01-01

    The tasks of probabilistic safety assessment(PSA) consists of the identification of initiating events, the construction of event tree for each initiating event, construction of fault trees for event tree logics, the analysis of reliability data and finally the accident sequence quantification. In the PSA, the accident sequence quantification is to calculate the core damage frequency, importance analysis and uncertainty analysis. Accident sequence quantification requires to understand the whole model of the PSA because it has to combine all event tree and fault tree models, and requires the excellent computer code because it takes long computation time. Advanced Research Group of Korea Atomic Energy Research Institute(KAERI) has developed PSA workstation KIRAP(Korea Integrated Reliability Analysis Code Package) for the PSA work. This report describes the procedures to perform accident sequence quantification, the method to use KIRAP's cut set generator, and method to perform the accident sequence quantification with KIRAP. (author). 6 refs

  10. Accident-tolerant control rod

    International Nuclear Information System (INIS)

    Ohta, Hirokazu; Sawabe, Takashi; Ogata, Takanari

    2013-01-01

    Boron carbide (B 4 C) and hafnium (Hf) metal are used for the neutron absorber materials of control rods in BWRs, and silver-indium-cadmium (Ag-In-Cd) alloy is used in PWRs. These materials are clad with stainless steel. The eutectic point of B 4 C and iron (Fe) is about 1150 deg. C and the melting point of Ag-In-Cd alloy is about 800 deg. C, which are lower than the temperature of zircaloy - steam reaction increases rapidly (∼1200 deg. C). Accordingly, it is possible that the control rods melt and collapse before the reactor core is significantly damaged in the case of severe accidents. Since the neutron absorber would be separated from the fuels, there is a risk of re-criticality, when pure water or seawater is injected for emergency cooling. In order to ensure sub-criticality and extend options of emergency cooling in the course of severe accidents, a concept of accident-tolerant control rod (ACT) has been derived. ACT utilises a new absorber material having the following properties: - higher neutron absorption than current control rod; - higher melting or eutectic temperature than 1200 deg. C where rapid zircaloy oxidation occurs; - high miscibility with molten fuel materials. The candidate of a new absorber material for ATC includes gadolinia (Gd 2 O 3 ), samaria (Sm 2 O 3 ), europia (Eu 2 O 3 ), dysprosia (Dy 2 O 3 ), hafnia (HfO 2 ). The melting point of these materials and the liquefaction temperature with Fe are higher than the rapid zircaloy oxidation temperature. ACT will not collapse before the core melt-down. After the core melt-down, the absorber material will be mixed with molten fuel material. The current absorber materials, such as B 4 C, Hf and Ag-In-Cd, are charged at the tip of ATC in which the neutron flux is high, and a new absorber material is charged in the low-flux region. This design could minimise the degradation of a new absorber material by the neutron absorption and the influence of ATC deployment on reactor control procedure. As a

  11. Traffic accidents on expressways: new threat to China.

    Science.gov (United States)

    Zhao, Jinbao; Deng, Wei

    2012-01-01

    As China is building one of the largest expressway systems in the world, expressway safety problems have become serious concerns to China. This article analyzed the trends in expressway accidents in China from 1995 to 2010 and examined the characteristics of these accidents. Expressway accident data were obtained from the Annual Report for Road Traffic Accidents published by the Ministry of Public Security of China. Expressway mileage data were obtained from the National Statistics Yearbook published by the National Bureau of Statistics of China. Descriptive statistical analyses were conducted based on these data. Expressway deaths increased by 10.2-fold from 616 persons in 1995 to 6300 persons in 2010, and the average annual increase was 17.9 percent over the past 15 years, and the overall other road traffic deaths was -0.33 percent. China's expressway mileage accounted for only 1.85 percent of highway mileage driven in 2010, but expressway deaths made up 13.54 percent of highway traffic deaths. The average annual accident lethality rate [accident deaths/(accident deaths + accident injuries)] for China's expressways was 27.76 percent during the period 1995 to 2010, which was 1.33 times higher than the accident lethality rate of highway traffic accidents. China's government should pay attention to expressway construction and safety interventions during the rapid development period of expressways. Related causes, such as geographic patterns, speeding, weather conditions, and traffic flow composition, need to be studied in the near future. An effective and scientific expressway safety management services system, composed of a speed monitoring system, warning system, and emergency rescue system, should be established in developed and underdeveloped provinces in China to improve safety on expressway.

  12. HANARO thermal hydraulic accident analysis

    Energy Technology Data Exchange (ETDEWEB)

    Park, Chul; Kim, Heon Il; Lee, Bo Yook; Lee, Sang Yong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-06-01

    For the safety assessment of HANARO, accident analyses for the anticipated operational transients, accident scenarios and limiting accident scenarios were conducted. To do this, the commercial nuclear reactor system code. RELAP5/MOD2 was modified to RELAP5/KMRR; the thermal hydraulic correlations and the heat exchanger model was changed to incorporate HANARO characteristics. This report summarizes the RELAP/KMRR calculation results and the subchannel analyses results based on the RELAP/KMRR results. During the calculation, major concern was placed on the integrity of the fuel. For all the scenarios, the important accident analysis parameters, i.e., fuel centerline temperatures and the minimum critical heat flux ratio(MCHFR), satisfied safe design limits. It was verified, therefore, that the HANARO was safely designed. 21 tabs., 89 figs., 39 refs. (Author) .new.

  13. Methods and codes for assessing the off-site Consequences of nuclear accidents. Volume 2

    International Nuclear Information System (INIS)

    Kelly, G.N.; Luykx, F.

    1991-01-01

    The Commission of the European Communities, within the framework of its 1980-84 radiation protection research programme, initiated a two-year project in 1983 entitled methods for assessing the radiological impact of accidents (Maria). This project was continued in a substantially enlarged form within the 1985-89 research programme. The main objectives of the project were, firstly, to develop a new probabilistic accident consequence code that was modular, incorporated the best features of those codes already in use, could be readily modified to take account of new data and model developments and would be broadly applicable within the EC; secondly, to acquire a better understanding of the limitations of current models and to develop more rigorous approaches where necessary; and, thirdly, to quantify the uncertainties associated with the model predictions. This research led to the development of the accident consequence code Cosyma (COde System from MAria), which will be made generally available later in 1990. The numerous and diverse studies that have been undertaken in support of this development are summarized in this paper, together with indications of where further effort might be most profitably directed. Consideration is also given to related research directed towards the development of real-time decision support systems for use in off-site emergency management

  14. Seminar on Comparative assessment of the environmental impact of radionuclides released during three major nuclear accidents: Kyshtym, Windscale, Chernobyl. Vol. 1

    International Nuclear Information System (INIS)

    1991-01-01

    These proceedings of seminar on comparative assessment of the environmental impact of radionuclides released during three major nuclear accidents (Kyshtym, Windscale, Chernobyl) are divided into 5 parts bearing on: part 1: accident source terms; part 2: atmospheric dispersion, resuspension, chemical and physical forms of contamination; part 3: environmental contamination and transfer; part 4: radiological implications for man and his environment; part 5: countermeasures

  15. Evaluation of severe accident risks: Quantification of major input parameters: MAACS [MELCOR Accident Consequence Code System] input

    International Nuclear Information System (INIS)

    Sprung, J.L.; Jow, H-N; Rollstin, J.A.; Helton, J.C.

    1990-12-01

    Estimation of offsite accident consequences is the customary final step in a probabilistic assessment of the risks of severe nuclear reactor accidents. Recently, the Nuclear Regulatory Commission reassessed the risks of severe accidents at five US power reactors (NUREG-1150). Offsite accident consequences for NUREG-1150 source terms were estimated using the MELCOR Accident Consequence Code System (MACCS). Before these calculations were performed, most MACCS input parameters were reviewed, and for each parameter reviewed, a best-estimate value was recommended. This report presents the results of these reviews. Specifically, recommended values and the basis for their selection are presented for MACCS atmospheric and biospheric transport, emergency response, food pathway, and economic input parameters. Dose conversion factors and health effect parameters are not reviewed in this report. 134 refs., 15 figs., 110 tabs

  16. External dose assessment in the Ukraine following the Chernobyl accident

    Science.gov (United States)

    Frazier, Remi Jordan Lesartre

    While the physiological effects of radiation exposure have been well characterized in general, it remains unclear what the relationship is between large-scale radiological events and psychosocial behavior outcomes in individuals or populations. To investigate this, the National Science Foundation funded a research project in 2008 at the University of Colorado in collaboration with Colorado State University to expand the knowledge of complex interactions between radiation exposure, perception of risk, and psychosocial behavior outcomes by modeling outcomes for a representative sample of the population of the Ukraine which had been exposed to radiocontaminant materials released by the reactor accident at Chernobyl on 26 April 1986. In service of this project, a methodology (based substantially on previously published models specific to the Chernobyl disaster and the Ukrainian population) was developed for daily cumulative effective external dose and dose rate assessment for individuals in the Ukraine for as a result of the Chernobyl disaster. A software platform was designed and produced to estimate effective external dose and dose rate for individuals based on their age, occupation, and location of residence on each day between 26 April 1986 and 31 December 2009. A methodology was developed to transform published 137Cs soil deposition contour maps from the Comprehensive Atlas of Caesium Deposition on Europe after the Chernobyl Accident into a geospatial database to access these data as a radiological source term. Cumulative effective external dose and dose rate were computed for each individual in a 703-member cohort of Ukrainians randomly selected to be representative of the population of the country as a whole. Error was estimated for the resulting individual dose and dose rate values with Monte Carlo simulations. Distributions of input parameters for the dose assessment methodology were compared to computed dose and dose rate estimates to determine which

  17. Application of GIS in prediction and assessment system of off-site accident consequence for NPP

    International Nuclear Information System (INIS)

    Wang Xingyu; Shi Zhongqi

    2002-01-01

    The assessment and prediction software system of off-site accident consequence for Guangdong Nuclear Power Plant (GNARD2.0) is a GIS-based software system. The spatial analysis of radioactive materials and doses with geographic information is available in this system. The structure and functions of the GNARD system and the method of applying ArcView GIS are presented

  18. CATHARE Assessment of PACTEL LOCA Experiments with Accident Management

    Directory of Open Access Journals (Sweden)

    Luben Sabotinov

    2010-01-01

    Full Text Available This paper summarizes the analysis results of three PACTEL experiments, carried out with the advanced thermal-hydraulic system computer CATHARE 2 code as a part of the second work package WP2 (analytical work of the EC project “Improved Accident Management of VVER nuclear power plants” (IMPAM-VVER. The three LOCA experiments, conducted on the Finnish test facility PACTEL (VVER-440 model, represent 7.4% cold leg breaks with combination of secondary bleed and primary bleed and feed and different actuation modes of the passive safety injection. The code was used for both defining and analyzing the experiments, and to assess its capabilities in predicting the associated complex VVER-related phenomena. The code results are in reasonable agreement with the measurements, and the important physical phenomena are well predicted, although still further improvement and validation might be necessary.

  19. The costs of failure: A preliminary assessment of major energy accidents, 1907-2007

    International Nuclear Information System (INIS)

    Sovacool, Benjamin K.

    2008-01-01

    A combination of technical complexity, tight coupling, speed, and human fallibility contribute to the unexpected failure of large-scale energy technologies. This study offers a preliminary assessment of the social and economic costs of major energy accidents from 1907 to 2007. It documents 279 incidents that have been responsible for $41 billion in property damage and 182,156 deaths. Such disasters highlight an often-ignored negative externality to energy production and use, and emphasize the need for further research

  20. The program system UFOMOD for assessing the consequences of nuclear accidents

    International Nuclear Information System (INIS)

    Ehrhardt, J.; Burkart, K.; Hasemann, I.; Matzerath, C.; Panitz, H.J.; Steinhauer, C.

    1988-10-01

    The programm system UFOMOD is a completely new accident consequence assessment (ACA) code. Its structure and modelling is based on the experience gained from applications of the old UFOMOD code during and after the German Risk Study - Phase A, the results of scientific investigations performed within the ongoing Phase B and the CEC-project MARIA, and the requirements resulting from the extended use of ACAs to help in decision-making. One of the most important improvements is the introduction of different trajecotry models for describing atmospheric dispersion in the near range and at larger distances. Emergency actions and countermeasures modelling takes into account recommendations of international commissions. The dosimetric models contain completely new age-, sex- and time-dependent data of dose-conversion factors for external and internal radiation; the ingestion pathway is modelled to consider seasonal dependencies. New dose-risk-relationships for stochastic and non-stochastic health effects are implemented; a special algorithm developed for ACA codes allows individual and collective leukemia and cancer risks to be presented as a function of time after the accident. According to the modular structure of the new program system UFOMOD, an easy access to parameter values and the results of the various submodels exists what facilitates sensitivity and uncertainty analyses. (orig.) [de

  1. Accident analysis device for nuclear power plants

    International Nuclear Information System (INIS)

    Ito, Masayuki.

    1982-01-01

    Purpose: To enable rapid recognition of and countermeasure required for accidents upon scram, by identifying the first contact point of causes for resulting the scram and displaying the contact point of causes. Constitution: When a scram signal is inputted by way of process input device, the time of the input is determined by a timer and the contact point of causes generated just before is taken as the point whose changes occurred prior to but most closely to the generation of the signal while referring to the data memory section for the time of change of the contact point of the cause, and sent to the accident analyzing display. The accident analyzing display extracts, based on the contact point of cause, a list for the forecast accidents corresponding thereto from the data memory section and also extracts the list for the corresponding confirmation items of the accident detection and displays them together with the system from which the scram signal has been generated, the time of generation, the name of the contact point of causes operated at first, and the value of the state quantity contained in the data memory section for the store of contact point of cause at the change. (Kawakami, Y.)

  2. Safety study on nuclear heat utilization system - accident delineation and assessment on nuclear steelmaking pilot plant

    International Nuclear Information System (INIS)

    Yoshida, T.; Mizuno, M.; Tsuruoka, K.

    1982-01-01

    This paper presents accident delineation and assessment on a nuclear steelmaking pilot plant as an example of nuclear heat utilization systems. The reactor thermal energy from VHTR is transported to externally located chemical process plant employing helium-heated steam reformer by an intermediate heat transport loop. This paper on the nuclear steelmaking pilot plant will describe (1) system transients under accident conditions, (2) impact of explosion and fire on the nuclear reactor and the public and (3) radiation exposure on the public. The results presented in this paper will contribute considerably to understanding safety features of nuclear heat utilization system that employs the intermediate heat transport loop and the helium-heated steam reformer

  3. The response to a worst-case scenario - the national emergency plan for nuclear accidents

    Energy Technology Data Exchange (ETDEWEB)

    Cunningham D, John [Radiological Protection Inst. of Ireland (Ireland)

    1996-10-01

    The Chernobyl accident in 1986 highlighted many deficiencies in the preparedness of countries to deal with a major accident. It demonstrated how vulnerable countries are to transboundary contamination. Ireland had no emergency plan at the time of the accident and only minimal facilities with which to assess the consequences of the accident. Nonetheless, the then Nuclear Energy Board with the assistance of Government Departments and the Civil Defence organisation reacted quickly to assess the situation despite the complete lack of information about the accident from the then USSR. Even countries with advanced nuclear technologies faced similar difficulties. It was quickly recognised by Government that the national laboratory facilities were totally inadequate. The Nuclear Energy Board was provided with additional resources to assist it to cope in the short term with the very large demand for monitoring. In the longer term a new national radiation laboratory was provided and the Board was formally replaced by the Radiological Protection Institute of Ireland. It was given statutory responsibility to monitor radiation levels, to advise measures to be taken for the protection of the public and to provide information for the public. An emergency plan based on the Chernobyl experience was drafted in 1987, amended and published in 1992. Certain features of this plan were implemented from 1987 onwards, notably the classification of responsibilities and the installation of a national continuous radiation monitoring system. The paper outlines the responsibilities of those who could be involved in a response to a nuclear incident, the procedures used to evaluate its consequences and the provision of information for the public. The plan provides an integrated management system which has sufficient flexibility to enable a rapid response to be made to a major or minor crisis, either foreseen or unforeseen and whatever its cause.

  4. Rapid monitoring of large groups of internally contaminated people following a radiation accident

    International Nuclear Information System (INIS)

    1994-05-01

    In the management of an emergency, it is necessary to assess the radiation exposures of people in the affected areas. An essential component in the programme is the monitoring of internal contamination. Existing fixed installations for the assessment of incorporated radionuclides may be of limited value in these circumstances because they may be inconveniently sited, oversensitive for the purpose, or inadequately equipped and staffed to cope with the large numbers referred to them. The IAEA considered it important to produce guidance on rapid monitoring of large groups of internally contaminated people. The purpose of this document is to provide Member States with an overview on techniques that can be applied during abnormal or accidental situations. Refs and figs

  5. Severe accident assessment. Results of the reactor safety research project VAHTI

    International Nuclear Information System (INIS)

    Sairanen, R.

    1997-10-01

    The report provides a summary of the publicly funded nuclear reactor safety research project Severe Accident Management (VAHTI). The project has been conducted at the Technical Research Centre of Finland (VTT) during the years 1994-96. The main objective was to assist the severe accident management programmes of the Finnish nuclear power plants. The project was divided into five work packages: (1) thermal hydraulic validation of the APROS code, (2) core melt progression within a BWR pressure vessel, (3) failure mode of the BWR pressure vessel, (4) Aerosol behaviour experiments, and (5) development of a computerized severe accident training tool

  6. Real-time assessment of radiation burden of the population in the vicinity of nuclear power plants during radiation accidents

    International Nuclear Information System (INIS)

    Stubna, M.

    1986-01-01

    The method is presented of real-time calculation of the radiation situation (dose equivalents) in the environs of a nuclear power plant in case of an accident involving the release of radioactive substances into the atmosphere, this for the potentially most significant exposure paths in the initial and medium stages of the accident. The method allows to take into consideration the time dependence of the rate of radioactive substance release from the nuclear power plant and to assess the development in space and time of the radiation situation in the environs of the nuclear power plant. The use of the method is illustrated by an example of the calculation of the development of the radiation situation for model accidents of a hypothetical PWR with containment. (author)

  7. Traffic Accidents in Kosovo – A Major Concern for Kosovo

    Directory of Open Access Journals (Sweden)

    Merita Muharremi

    2017-03-01

    Full Text Available The number of traffic c accidents in Kosovo is increasing rapidly from year to year. As a result of traffi c accidents the number of injured and deaths has increased. During the period of January-December 2016 there were 18541 accidents, which resulted in 110 casualties (Kosovo Police Annual Reports. Campaigns undertaken by the Government of Kosovo, Ministry of Infrastructure and Transport and the Kosovo Police, as well as various video-spots intended to raise awareness of the dangers of traffic c accidents have not accomplished the expected results and did not reduce the number of accidents. Therefore, we can conclude that the number of accidents taking place in Kosovo is concerning. Despite the best efforts of relevant institutions, despite the increased engagement to pass legislation, which would be in line with the European standards, and despite substantial improvements and major investments on the infrastructure, and despite all the measures taken, reducing the number of road accidents remains a significant challenge. With this paper, I will try to draw attention to the actions, measures and activities that I consider the relevant institutions of Kosovo should focus on in order to prevent and to reduce the high number of traffic accidents.

  8. Chernobylsk NPP accident and its medical effects

    International Nuclear Information System (INIS)

    Gus'kova, A.K.

    2000-01-01

    Medical effects of the Chernobyl accident for various groups of people engaged in liquidation of the accident aftereffects and residents of the regions affected are assessed. Specific medical and social recommendations for each of the five groups of patients are made. Special attention is paid to the health of children who were exposed to external radiation in combination with intake of iodine isotopes. Extremely unfavourable influence of the mass media on the health of people involved in the Chernobyl accident is painted out. The necessity of adequate rehabilitation measures for various categories of patients involved in a large-scale accident is emphasized [ru

  9. Sensitivity assessment of fuel performance codes for LOCA accident scenario

    Energy Technology Data Exchange (ETDEWEB)

    Abe, Alfredo; Gomes, Daniel; Silva, Antonio Teixeira e; Muniz, Rafael O.R. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Giovedi, Claudia; Martins, Marcelo, E-mail: ayabe@ipen.br, E-mail: claudia.giovedi@labrisco.usp.br [Universidade de Sao Paulo (LABRISCO/USP), Sao Paulo, SP (Brazil). Lab. de Análise, Avaliação e Gerenciamento de Risco

    2017-07-01

    FRAPCON code predicts fuel rod performance in LWR (Light Water Reactor) by modeling fuel responses under normal operating conditions and anticipated operational occurrences; FRAPTRAN code is applied for fuel transient under fast transient and accident conditions. The codes are well known and applied for different purposes and one of the use is to address sensitivity analysis considering fuel design parameters associated to fabrication, moreover can address the effect of physical models bias. The objective of this work was to perform an assessment of fuel manufacturing parameters tolerances and fuel models bias using FRAPCON and FRAPTRAN codes for Loss of Coolant Accident (LOCA) scenario. The preliminary analysis considered direct approach taken into account most relevant manufacturing tolerances (lower and upper bounds) related to design parameters and physical models bias without considering their statistical distribution. The simulations were carried out using the data available in the open literature related to the series of LOCA experiment performed at the Halden reactor (specifically IFA-650.5). The manufacturing tolerances associated to design parameters considered in this paper were: enrichment, cladding thickness, pellet diameter, pellet density, and filling gas pressure. The physical models considered were: fuel thermal expansion, fission gas release, fuel swelling, irradiation creep, cladding thermal expansion, cladding corrosion, and cladding hydrogen pickup. The results obtained from sensitivity analysis addressed the impact of manufacturing tolerances and physical models in the fuel cladding burst time observed for the IFA-650.5 experiment. (author)

  10. Sensitivity assessment of fuel performance codes for LOCA accident scenario

    International Nuclear Information System (INIS)

    Abe, Alfredo; Gomes, Daniel; Silva, Antonio Teixeira e; Muniz, Rafael O.R.; Giovedi, Claudia; Martins, Marcelo

    2017-01-01

    FRAPCON code predicts fuel rod performance in LWR (Light Water Reactor) by modeling fuel responses under normal operating conditions and anticipated operational occurrences; FRAPTRAN code is applied for fuel transient under fast transient and accident conditions. The codes are well known and applied for different purposes and one of the use is to address sensitivity analysis considering fuel design parameters associated to fabrication, moreover can address the effect of physical models bias. The objective of this work was to perform an assessment of fuel manufacturing parameters tolerances and fuel models bias using FRAPCON and FRAPTRAN codes for Loss of Coolant Accident (LOCA) scenario. The preliminary analysis considered direct approach taken into account most relevant manufacturing tolerances (lower and upper bounds) related to design parameters and physical models bias without considering their statistical distribution. The simulations were carried out using the data available in the open literature related to the series of LOCA experiment performed at the Halden reactor (specifically IFA-650.5). The manufacturing tolerances associated to design parameters considered in this paper were: enrichment, cladding thickness, pellet diameter, pellet density, and filling gas pressure. The physical models considered were: fuel thermal expansion, fission gas release, fuel swelling, irradiation creep, cladding thermal expansion, cladding corrosion, and cladding hydrogen pickup. The results obtained from sensitivity analysis addressed the impact of manufacturing tolerances and physical models in the fuel cladding burst time observed for the IFA-650.5 experiment. (author)

  11. Development of the assessment of nuclear accident consequences and decision support system in China: status, requirement and recommendations

    International Nuclear Information System (INIS)

    Shi Zhongqi; Wang Xingyu

    2003-01-01

    This paper introduces the status of nuclear accident consequence assessment/development of decision-making support system in China. The basic functions and roles of the consequence assessment/decision-making support system for three levels of nuclear emergency response organization (i.e. national, local offsite and nuclear power plant operator) in China are presented in the paper

  12. Rapid Fishery Assessment by Market Survey (RFAMS--an improved rapid-assessment approach to characterising fish landings in developing countries.

    Directory of Open Access Journals (Sweden)

    William T White

    Full Text Available The complex multi-gear, multi-species tropical fisheries in developing countries are poorly understood and characterising the landings from these fisheries is often impossible using conventional approaches. A rapid assessment method for characterising landings at fish markets, using an index of abundance and estimated weight within taxonomic groups, is described. This approach was developed for contexts where there are no detailed data collection protocols, and where consistent data collection across a wide range of fisheries types and geographic areas is required, regardless of the size of the site and scale of the landings. This methodology, which was demonstrated at seven fish landing sites/fish markets in southern Indonesia between July 2008 and January 2011, provides a rapid assessment of the abundance and diversity in the wild catch over a wide variety of taxonomic groups. The approach has wider application for species-rich fisheries in developing countries where there is an urgent need for better data collection protocols, monitoring future changes in market demographics, and evaluating health of fisheries.

  13. Radiation dose assessment of ACP hot cell in accident

    International Nuclear Information System (INIS)

    Kook, D. H.; Jeong, W. M.; Koo, J. H.; Jeo, I. J.; Lee, E. P.; Ryu, K. S.

    2003-01-01

    The Advanced spent fuel Condition in Process(ACP) is under development for the effective management of spent fuel which had been generated in nuclear plants. The ACP needs a hot cell where most operations will be performed. To give priority to the environments safety, radiation doses evaluations for the radioactive nuclides in accident cases were preliminarily performed with the meteorological data around facility site. Fire accident prevails over several accidnets. Internal Dose and External Dose evaluation according to short dispersion data for that case show a safe margin for regulation limits and SAR limit of IMEF where this facility will be constructed

  14. Assessing information needs and instrument availability for a pressurized water reactor during severe accidents

    Energy Technology Data Exchange (ETDEWEB)

    Hanson, Duane J. (Idaho National Engineering Laboratory, Idaho Falls, ID 83415 (United States)); Arcieri, William C. (Idaho National Engineering Laboratory, Idaho Falls, ID 83415 (United States)); Ward, Leonard W. (Idaho National Engineering Laboratory, Idaho Falls, ID 83415 (United States))

    1994-07-01

    A five-step methodology was developed to evaluate information needs for nuclear power plants under accident conditions and the availability of plant instrumentation during severe accidents. Step 1 examines the credible accidents and their relationships to plant safety functions. Step 2 determines the information that personnel involved in accident management will need to understand plant behavior. Step 3 determines the capability of the instrumentation to function properly under severe accident conditions. Step 4 determines the conditions expected during the identified severe accidents. Step 5 compares the instrument capabilities and severe accident conditions, to evaluate the availability of the instrumentation to supply needed plant information. This methodology was applied to a pressurized water reactor with a large dry containment and the results are presented. A companion article describes application of the methodology to a boiling water reactor with a Mark I containment. ((orig.))

  15. Assessing information needs and instrument availability for a pressurized water reactor during severe accidents

    International Nuclear Information System (INIS)

    Hanson, Duane J.; Arcieri, William C.; Ward, Leonard W.

    1994-01-01

    A five-step methodology was developed to evaluate information needs for nuclear power plants under accident conditions and the availability of plant instrumentation during severe accidents. Step 1 examines the credible accidents and their relationships to plant safety functions. Step 2 determines the information that personnel involved in accident management will need to understand plant behavior. Step 3 determines the capability of the instrumentation to function properly under severe accident conditions. Step 4 determines the conditions expected during the identified severe accidents. Step 5 compares the instrument capabilities and severe accident conditions, to evaluate the availability of the instrumentation to supply needed plant information. This methodology was applied to a pressurized water reactor with a large dry containment and the results are presented. A companion article describes application of the methodology to a boiling water reactor with a Mark I containment. ((orig.))

  16. Methodology for the Assessment of Confidence in Safety Margin for Small Break Loss of Coolant Accident Sequences

    Energy Technology Data Exchange (ETDEWEB)

    Nagrale, D. B.; Prasad, M.; Rao, R. S.; Gaikwad, A.J., E-mail: avinashg@aerb.gov.in [Nuclear Safety Analysis Division, Atomic Energy Regulatory Board, Mumbai (India)

    2014-10-15

    Deterministic Safety Analysis and Probabilistic Safety Assessment (PSA) analyses are used concurrently to assess the Nuclear Power Plant (NPP) safety. The conventional deterministic analysis is conservative. The best estimate plus uncertainty analysis is increasingly being used for deterministic calculation in NPPs. The PSA methodology aims to be as realistic as possible while integrating information about accident phenomena, plant design, operating practices, component reliability and human behaviour. The peak clad temperature (PCT) distribution provides an insight into the confidence in safety margin for an initiating event. The paper deals with the concept of calculating the peak clad temperature with 95 percent confidence and 95 percent probability (PCT{sub 95/95}) in small break loss of coolant accident (SBLOCA) and methodologies for assessing safety margin. Five input parameters mainly, nominal power level, decay power, fuel clad gap conductivity, fuel thermal conductivity and discharge coefficient, were selected. A Uniform probability density function was assigned to the uncertain parameters and these uncertainties are propagated using Latin Hypercube Sampling (LHS) technique. The sampled data for 5 parameters were randomly mixed by LHS to obtain 25 input sets. A non-core damage accident sequence was selected from the SBLOCA event tree of a typical VVER study to estimate the PCTs and safety margin. A Kolmogorov– Smirnov goodness-of-fit test was carried out for PCTs. The smallest value of safety margin would indicate the robustness of the system with 95% confidence and 95% probability. Regression analysis was also carried out using 1000 sample size for the estimating PCTs. Mean, variance and finally safety margin were analysed. (author)

  17. Accidents in nuclear ships

    Energy Technology Data Exchange (ETDEWEB)

    Oelgaard, P L [Risoe National Lab., Roskilde (Denmark); [Technical Univ. of Denmark, Lyngby (Denmark)

    1996-12-01

    This report starts with a discussion of the types of nuclear vessels accidents, in particular accidents which involve the nuclear propulsion systems. Next available information on 61 reported nuclear ship events in considered. Of these 6 deals with U.S. ships, 54 with USSR ships and 1 with a French ship. The ships are in almost all cases nuclear submarines. Only events that involve the sinking of vessels, the nuclear propulsion plants, radiation exposures, fires/explosions, sea-water leaks into the submarines and sinking of vessels are considered. For each event a summary of available information is presented, and comments are added. In some cases the available information is not credible, and these events are neglected. This reduces the number of events to 5 U.S. events, 35 USSR/Russian events and 1 French event. A comparison is made between the reported Soviet accidents and information available on dumped and damaged Soviet naval reactors. It seems possible to obtain good correlation between the two types of events. An analysis is made of the accident and estimates are made of the accident probabilities which are found to be of the order of 10{sup -3} per ship reactor years. It if finally pointed out that the consequences of nuclear ship accidents are fairly local and does in no way not approach the magnitude of the Chernobyl accident. It is emphasized that some of the information on which this report is based, may not be correct. Consequently some of the results of the assessments made may not be correct. (au).

  18. Accidents in nuclear ships

    International Nuclear Information System (INIS)

    Oelgaard, P.L.

    1996-12-01

    This report starts with a discussion of the types of nuclear vessels accidents, in particular accidents which involve the nuclear propulsion systems. Next available information on 61 reported nuclear ship events in considered. Of these 6 deals with U.S. ships, 54 with USSR ships and 1 with a French ship. The ships are in almost all cases nuclear submarines. Only events that involve the sinking of vessels, the nuclear propulsion plants, radiation exposures, fires/explosions, sea-water leaks into the submarines and sinking of vessels are considered. For each event a summary of available information is presented, and comments are added. In some cases the available information is not credible, and these events are neglected. This reduces the number of events to 5 U.S. events, 35 USSR/Russian events and 1 French event. A comparison is made between the reported Soviet accidents and information available on dumped and damaged Soviet naval reactors. It seems possible to obtain good correlation between the two types of events. An analysis is made of the accident and estimates are made of the accident probabilities which are found to be of the order of 10 -3 per ship reactor years. It if finally pointed out that the consequences of nuclear ship accidents are fairly local and does in no way not approach the magnitude of the Chernobyl accident. It is emphasized that some of the information on which this report is based, may not be correct. Consequently some of the results of the assessments made may not be correct. (au)

  19. Uncertainty analysis with a view towards applications in accident consequence assessments

    International Nuclear Information System (INIS)

    Fischer, F.; Erhardt, J.

    1985-09-01

    Since the publication of the US-Reactor Safety Study WASH-1400 there has been an increasing interest to develop and apply methods which allow to quantify the uncertainty inherent in probabilistic risk assessments (PRAs) and accident consequence assessments (ACAs) for installations of the nuclear fuel cycle. Research and development in this area is forced by the fact that PRA and ACA are more and more used for comparative, decisive and fact finding studies initiated by industry and regulatory commissions. This report summarizes and reviews some of the main methods and gives some hints to do sensitivity and uncertainty analyses. Some first investigations aiming at the application of the method mentioned above to a submodel of the ACA-code UFOMOD (KfK) are presented. Sensitivity analyses and some uncertainty studies an important submodel of UFOMOD are carried out to identify the relevant parameters for subsequent uncertainty calculations. (orig./HP) [de

  20. Containment severe accident thermohydraulic phenomena

    International Nuclear Information System (INIS)

    Frid, W.

    1991-08-01

    This report describes and discusses the containment accident progression and the important severe accident containment thermohydraulic phenomena. The overall objective of the report is to provide a rather detailed presentation of the present status of phenomenological knowledge, including an account of relevant experimental investigations and to discuss, to some extent, the modelling approach used in the MAAP 3.0 computer code. The MAAP code has been used in Sweden as the main tool in the analysis of severe accidents. The dependence of the containment accident progression and containment phenomena on the initial conditions, which in turn are heavily dependent on the in-vessel accident progression and phenomena as well as associated uncertainties, is emphasized. The report is in three parts dealing with: * Swedish reactor containments, the severe accident mitigation programme in Sweden and containment accident progression in Swedish PWRs and BWRs as predicted by the MAAP 3.0 code. * Key non-energetic ex-vessel phenomena (melt fragmentation in water, melt quenching and coolability, core-concrete interaction and high temperature in containment). * Early containment threats due to energetic events (hydrogen combustion, high pressure melt ejection and direct containment heating, and ex-vessel steam explosions). The report concludes that our understanding of the containment severe accident progression and phenomena has improved very significantly over the parts ten years and, thereby, our ability to assess containment threats, to quantify uncertainties, and to interpret the results of experiments and computer code calculations have also increased. (au)

  1. Expert software for accident identification

    International Nuclear Information System (INIS)

    Dobnikar, M.; Nemec, T.; Muehleisen, A.

    2003-01-01

    Each type of an accident in a Nuclear Power Plant (NPP) causes immediately after the start of the accident variations of physical parameters that are typical for that type of the accident thus enabling its identification. Examples of these parameter are: decrease of reactor coolant system pressure, increase of radiation level in the containment, increase of pressure in the containment. An expert software enabling a fast preliminary identification of the type of the accident in Krsko NPP has been developed. As input data selected typical parameters from Emergency Response Data System (ERDS) of the Krsko NPP are used. Based on these parameters the expert software identifies the type of the accident and also provides the user with appropriate references (past analyses and other documentation of such an accident). The expert software is to be used as a support tool by an expert team that forms in case of an emergency at Slovenian Nuclear Safety Administration (SNSA) with the task to determine the cause of the accident, its most probable scenario and the source term. The expert software should provide initial identification of the event, while the final one is still to be made after appropriate assessment of the event by the expert group considering possibility of non-typical events, multiple causes, initial conditions, influences of operators' actions etc. The expert software can be also used as an educational/training tool and even as a simple database of available accident analyses. (author)

  2. Preliminary results of consequence assessment of a hypothetical severe accident using Thai meteorological data

    Science.gov (United States)

    Silva, K.; Lawawirojwong, S.; Promping, J.

    2017-06-01

    Consequence assessment of a hypothetical severe accident is one of the important elements of the risk assessment of a nuclear power plant. It is widely known that the meteorological conditions can significantly influence the outcomes of such assessment, since it determines the results of the calculation of the radionuclide environmental transport. This study aims to assess the impacts of the meteorological conditions to the results of the consequence assessment. The consequence assessment code, OSCAAR, of Japan Atomic Energy Agency (JAEA) is used for the assessment. The results of the consequence assessment using Thai meteorological data are compared with those using Japanese meteorological data. The Thai case has following characteristics. Low wind speed made the radionuclides concentrate at the center comparing to the Japanese case. The squalls induced the peaks in the ground concentration distribution. The evacuated land is larger than the Japanese case though the relocated land is smaller, which is attributed to the concentration of the radionuclides near the release point.

  3. Severe Accident Test Station Activity Report

    Energy Technology Data Exchange (ETDEWEB)

    Pint, Bruce A [ORNL; Terrani, Kurt A [ORNL

    2015-06-01

    Enhancing safety margins in light water reactor (LWR) severe accidents is currently the focus of a number of international R&D programs. The current UO2/Zr-based alloy fuel system is particularly susceptible since the Zr-based cladding experiences rapid oxidation kinetics in steam at elevated temperatures. Therefore, alternative cladding materials that offer slower oxidation kinetics and a smaller enthalpy of oxidation can significantly reduce the rate of heat and hydrogen generation in the core during a coolant-limited severe accident. In the U.S. program, the high temperature steam oxidation performance of accident tolerant fuel (ATF) cladding solutions has been evaluated in the Severe Accident Test Station (SATS) at Oak Ridge National Laboratory (ORNL) since 2012. This report summarizes the capabilities of the SATS and provides an overview of the oxidation kinetics of several candidate cladding materials. A suggested baseline for evaluating ATF candidates is a two order of magnitude reduction in the steam oxidation resistance above 1000ºC compared to Zr-based alloys. The ATF candidates are categorized based on the protective external oxide or scale that forms during exposure to steam at high temperature: chromia, alumina, and silica. Comparisons are made to literature and SATS data for Zr-based alloys and other less-protective materials.

  4. Strategy generation in accident management support

    International Nuclear Information System (INIS)

    Sirola, M.

    1995-01-01

    An increased interest for research in the field of Accident Management can be noted. Several international programmes have been started in order to be able to understand the basic physical and chemical phenomena in accident conditions. A feasibility study has shown that it would be possible to design and develop a computerized support system for plant staff in accident situations. To achieve this goal the Halden Project has initiated a research programme on Computerized Accident Management Support (CAMS project). The aim is to utilize the capabilities of computerized tools to support the plant staff during the various accident stages. The system will include identification of the accident state, assessment of the future development of the accident and planning of accident mitigation strategies. A prototype is developed to support operators and the Technical Support Centre in decision making during serious accident in nuclear power plants. A rule based system has been built to take care of the strategy generation. This system assists plant personnel in planning control proposals and mitigation strategies from normal operation to severe accident conditions. The ideal of a safety objective tree and knowledge from the emergency procedures have been used. Future prediction requires good state identification of the plant status and some knowledge about the history of some critical variables. The information needs to be validated as well. Accurate calculations in simulators and a large database including all important information form the plant will help the strategy planning. (author). 12 refs, 2 figs

  5. Additional safety assessment of the INB 29. After the Fukushima Daiichi accident

    International Nuclear Information System (INIS)

    2012-01-01

    A first part presents various general characteristics of the base nuclear installation (INB) number 29 (CIS bio International): main buildings, used materials, venting systems, electric supplies, control and command system, radiation protection measures. A second part identifies the cliff-edge effects and critical structures and equipment. The next parts address the seismic risk (installation sizing, margin assessment, robustness to fires possibly initiated by an earthquake), the flooding risk (installation sizing with respect to different flooding risks of different origins, margin assessment, active liquid waste tanks), other extreme natural phenomena (related to flooding, earthquake/flooding combination), the loss of electric supplies, thermal releases (loss of cyclotron cooling, releases related to source warehousing), the organization of severe accident management, the influence of other installations on crisis management, and subcontracting practices

  6. Consequences of the Chernobyl accident in Lithuania

    International Nuclear Information System (INIS)

    Mastauskas, A.; Nedvecktaite, T.; Filistovic, V.

    1997-01-01

    After the Chernobyl accident of 26 April, 1986, population dose assessment favours the view that the radiation risk of population effected by the early fallout would be different from that in regions contaminated later. Taking into account the short half-time of the most important radioactive iodine isotopes, thyroid disorders would be expected mainly to follow the early fallout distribution. At the time of accident at Unite 4 of the Chernobyl NPP, surface winds were from the Southeast. The initial explosions and heat carried volatile radioactive materials to the 1,5 km height, from where they were transported over the Western part of Belarus, Southern and Western part of Lithuania toward Scandinavian countries. Thus the volatile radioiodine and some other radionuclides were detected in Lithuania on the very first days after the accident. The main task of the work - to conduct short Half-time radioiodine and long half-time radiocesium dose assessment of Lithuanian inhabitants a result of the early Chernobyl accident fallout

  7. Assessment of accident severity in the construction industry using the Bayesian theorem.

    Science.gov (United States)

    Alizadeh, Seyed Shamseddin; Mortazavi, Seyed Bagher; Mehdi Sepehri, Mohammad

    2015-01-01

    Construction is a major source of employment in many countries. In construction, workers perform a great diversity of activities, each one with a specific associated risk. The aim of this paper is to identify workers who are at risk of accidents with severe consequences and classify these workers to determine appropriate control measures. We defined 48 groups of workers and used the Bayesian theorem to estimate posterior probabilities about the severity of accidents at the level of individuals in construction sector. First, the posterior probabilities of injuries based on four variables were provided. Then the probabilities of injury for 48 groups of workers were determined. With regard to marginal frequency of injury, slight injury (0.856), fatal injury (0.086) and severe injury (0.058) had the highest probability of occurrence. It was observed that workers with severe and fatal accidents, involved workers ≥ 50 years old, married, with 1-5 years' work experience, who had no past accident experience. The findings provide a direction for more effective safety strategies and occupational accident prevention and emergency programmes.

  8. Human factors review for Severe Accident Sequence Analysis (SASA)

    International Nuclear Information System (INIS)

    Krois, P.A.; Haas, P.M.; Manning, J.J.; Bovell, C.R.

    1984-01-01

    The paper will discuss work being conducted during this human factors review including: (1) support of the Severe Accident Sequence Analysis (SASA) Program based on an assessment of operator actions, and (2) development of a descriptive model of operator severe accident management. Research by SASA analysts on the Browns Ferry Unit One (BF1) anticipated transient without scram (ATWS) was supported through a concurrent assessment of operator performance to demonstrate contributions to SASA analyses from human factors data and methods. A descriptive model was developed called the Function Oriented Accident Management (FOAM) model, which serves as a structure for bridging human factors, operations, and engineering expertise and which is useful for identifying needs/deficiencies in the area of accident management. The assessment of human factors issues related to ATWS required extensive coordination with SASA analysts. The analysis was consolidated primarily to six operator actions identified in the Emergency Procedure Guidelines (EPGs) as being the most critical to the accident sequence. These actions were assessed through simulator exercises, qualitative reviews, and quantitative human reliability analyses. The FOAM descriptive model assumes as a starting point that multiple operator/system failures exceed the scope of procedures and necessitates a knowledge-based emergency response by the operators. The FOAM model provides a functionally-oriented structure for assembling human factors, operations, and engineering data and expertise into operator guidance for unconventional emergency responses to mitigate severe accident progression and avoid/minimize core degradation. Operators must also respond to potential radiological release beyond plant protective barriers. Research needs in accident management and potential uses of the FOAM model are described. 11 references, 1 figure

  9. National emergency plan for nuclear accidents

    International Nuclear Information System (INIS)

    1992-10-01

    The national emergency plan for nuclear accidents is a plan of action designed to provide a response to accidents involving the release or potential release of radioactive substances into the environment, which could give rise to radiation exposure to the public. The plan outlines the measures which are in place to assess and mitigate the effects of nuclear accidents which might pose a radiological hazard in ireland. It shows how accident management will operate, how technical information and monitoring data will be collected, how public information will be provided and what measures may be taken for the protection of the public in the short and long term. The plan can be integrated with the Department of Defence arrangements for wartime emergencies

  10. Improvement of severe accident analysis method for KSNP

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jae Hong [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of); Cho, Song Won; Cho, Youn Soo [Korea Radiation Technology Institute Co., Taejon (Korea, Republic of)

    2002-03-15

    The objective of this study is preparation of MELCOR 1.8.5 input deck for KSNP and simulation of some major severe accidents. The contents of this project are preparation of MELCOR 1.8.5 base input deck for KSNP to understand severe accident phenomena and to assess severe accident strategy, preparation of 20 cell containment input deck to simulate the distribution of hydrogen and fission products in containment, simulation of some major severe accident scenarios such as TLOFW, SBO, SBLOCA, MBLOCA, and LBLOCA. The method for MELCOR 1.8.5 input deck preparation can be used to prepare the input deck for domestic PWRs and to simulate severe accident experiments such as ISP-46. Information gained from analyses of severe accidents may be helpful to set up the severe accident management strategy and to develop regulatory guidance.

  11. Assessment of environmental public exposure from a hypothetical nuclear accident for Unit-1 Bushehr nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Sohrabi, M.; Ghasemi, M.; Amrollahi, R.; Khamooshi, C.; Parsouzi, Z. [Amirkabir University of Technology, Health Physics and Dosimetry Research Laboratory, Department of Physics, Tehran (Iran, Islamic Republic of)

    2013-05-15

    Unit-1 of the Bushehr nuclear power plant (BNPP-1) is a VVER-type reactor with 1,000-MWe power constructed near Bushehr city at the coast of the Persian Gulf, Iran. The reactor has been recently operational to near its full power. The radiological impact of nuclear power plant (NPP) accidents is of public concern, and the assessment of radiological consequences of any hypothetical nuclear accident on public exposure is vital. The hypothetical accident scenario considered in this paper is a design-basis accident, that is, a primary coolant leakage to the secondary circuit. This scenario was selected in order to compare and verify the results obtained in the present paper with those reported in the Final Safety Analysis Report (FSAR 2007) of the BNPP-1 and to develop a well-proven methodology that can be used to study other and more severe hypothetical accident scenarios for this reactor. In the present study, the version 2.01 of the PC COSYMA code was applied. In the early phase of the accidental releases, effective doses (from external and internal exposures) as well as individual and collective doses (due to the late phase of accidental releases) were evaluated. The surrounding area of the BNPP-1 within a radius of 80 km was subdivided into seven concentric rings and 16 sectors, and distribution of population and agricultural products was calculated for this grid. The results show that during the first year following the modeled hypothetical accident, the effective doses do not exceed the limit of 5 mSv, for the considered distances from the BNPP-1. The results obtained in this study are in good agreement with those in the FSAR-2007 report. The agreement obtained is in light of many inherent uncertainties and variables existing in the two modeling procedures applied and proves that the methodology applied here can also be used to model other severe hypothetical accident scenarios of the BNPP-1 such as a small and large break in the reactor coolant system as well

  12. Sarnet lecture notes on nuclear reactor severe accident phenomenology

    International Nuclear Information System (INIS)

    Trambauer, K.; Adroguer, B.; Fichot, F.; Muller, C.; Meyer, L.; Breitung, W.; Magallon, D.; Journeau, C.; Alsmeyer, H.; Housiadas, C.; Clement, B.; Ang, M.L.; Chaumont, B.; Ivanov, I.; Marguet, S.; Van Dorsselaere, J.P.; Fleurot, J.; Giordano, P.; Cranga, M.

    2008-01-01

    The 'Severe Accident Phenomenology Short Course' is part of the Excellence Spreading activities of the European Severe Accident Research NETwork of Excellence SARNET (project of the EURATOM 6. Framework programme). It was held at Cadarache, 9-13 January 2006. The course was divided in 14 lectures covering all aspects of severe accident phenomena that occur during a scenario. It also included lectures on PSA-2, Safety Assessment and design measures in new LWR plants for severe accident mitigation (SAM). This book presents the lecture notes of the Severe Accident Phenomenology Short Course and condenses the essential knowledge on severe accident phenomenology in 2008. (authors)

  13. In-hospital paediatric accidents: an integrative review of the literature.

    Science.gov (United States)

    Da Rin Della Mora, R; Bagnasco, A; Sasso, L

    2012-12-01

    Paediatric hospitals can be perceived by children, parents, health professionals as 'safe' places, but accidents do occur. To review publications relating to in-hospital paediatric accidents and highlight the state-of-the-science concerning this issue especially in relation to falls, and the evolution of research addressing this issue. Integrative review of papers published before March 2011 on accidents and falls occurred in hospitalized children. Electronic databases (PubMed, Cumulative Index to Nursing and Allied Health Literature and Cochrane Library databases) and further hand searching through references were searched. The inclusion criteria were articles involving observational, quasi-experimental or experimental studies in English or Italian. Exclusion criteria were articles addressing the outcomes of falls caused by suspect violence on children. Thirteen studies in English were included. Of the 13 studies conducted between 1963 and 2010, 10 had been conducted in the last 5 years; 10 in the USA. The studies were divided into two categories: contextualization and prevention of the 'accident' or 'fall' phenomenon (10 studies), and fall risk assessment (three studies). The most frequent type of design was observational explorative/descriptive. Several areas of investigation were explored (hazardous environment, children's characteristics correlated to accidents/falls, characteristics of the accidents/falls and their outcomes, paediatric fall risk factors and risk assessment tools, fall risk prevention programmes, parents' perceptions of accident/fall risks, etc.). No comparable methods were used to investigate the contextualization and prevention of the 'accident' and 'fall' phenomena; proposed fall risk assessment tools were not evaluated for their reliability and validity. Consensus would be needed around the approach to accidents in terms of: the definition of 'accident' and 'fall'; 'fall-related injury' and respective classifications; the frequency and

  14. Severe accident recriticality analyses (SARA)

    DEFF Research Database (Denmark)

    Frid, W.; Højerup, C.F.; Lindholm, I.

    2001-01-01

    with all three codes. The core initial and boundary conditions prior to recriticality have been studied with the severe accident codes SCDAP/RELAP5, MELCOR and MAAP4. The results of the analyses show that all three codes predict recriticality-both super-prompt power bursts and quasi steady-state power......Recriticality in a BWR during reflooding of an overheated partly degraded core, i.e. with relocated control rods, has been studied for a total loss of electric power accident scenario. In order to assess the impact of recriticality on reactor safety, including accident management strategies......, which results in large energy deposition in the fuel during power burst in some accident scenarios. The highest value, 418 cal g(-1), was obtained with SIMULATE-3K for an Oskarshamn 3 case with reflooding rate of 2000 kg s(-1). In most cases, however, the predicted energy deposition was smaller, below...

  15. Consequences of potential accidents in heavy water plants

    International Nuclear Information System (INIS)

    Croitoru, C.; Lazar, R.E.; Preda, I.A.; Dumitrescu, M.

    2002-01-01

    Heavy water plants achieve the primary isotopic concentration by H 2 O-H 2 S chemical exchange. In these plants are stored large quantities of hydrogen sulphide (high toxic, corrosive, flammable and explosive) maintained in process at relative high temperatures and pressures. It is required an assessment of risks associated with the potential accidents. The paper presents adopted model for quantitative consequences assessment in heavy water plants. Following five basic steps are used to identify the risks involved in plants operation: hazard identification, accident sequences development, H 2 S emissions calculus, dispersion analyses and consequences determination. A brief description of each step and some information from risk assessment for our heavy water pilot plant are provided. Accident magnitude, atmospheric conditions and population density in studied area were accounted for consequences calculus. (author)

  16. Postulated accidents

    International Nuclear Information System (INIS)

    Ullrich, W.

    1980-01-01

    This lecture on 'Postulated Accidents' is the first of a series of lectures on the dynamic and transient behaviour of nuclear power plants, especially pressurized water reactors. The main points covered will be: Reactivity Accidents, Transients (Intact Loop) and Loss of Cooland Accidents (LOCA) including small leak. This lecture will discuss the accident analysis in general, the definition of the various operational phases, the accident classification, and, as an example, an accident sequence analysis on the basis of 'Postulated Accidents'. (orig./RW)

  17. Application of FFTBM to severe accidents

    International Nuclear Information System (INIS)

    Prosek, A.; Leskovar, M.

    2005-01-01

    In Europe an initiative for the reduction of uncertainties in severe accident safety issues was initiated. Generally, the error made in predicting plant behaviour is called uncertainty, while the discrepancies between measured and calculated trends related to experimental facilities are called the accuracy of the prediction. The purpose of the work is to assess the accuracy of the calculations of the severe accident International Standard Problem ISP-46 (Phebus FPT1), performed with two versions of MELCOR 1.8.5 for validation purposes. For the quantitative assessment of calculations the improved fast Fourier transform based method (FFTBM) was used with the capability to calculate time dependent code accuracy. In addition, a new measure for the indication of the time shift between the experimental and the calculated signal was proposed. The quantitative results obtained with FFTBM confirm the qualitative conclusions made during the Jozef Stefan Institute participation in ISP-46. In general good agreement of thermal-hydraulic variables and satisfactory agreement of total releases for most radionuclide classes was obtained. The quantitative FFTBM results showed that for the Phebus FPT1 severe accident experiment the accuracy of thermal-hydraulic variables calculated with the MELCOR severe accident code is close to the accuracy of thermal-hydraulic variables for design basis accident experiments calculated with best-estimate system codes. (author)

  18. Use of accident experience in developing criteria for teleoperator equipment

    International Nuclear Information System (INIS)

    Vallario, E.J.; Selby, J.M.

    1985-10-01

    The 1961 SL-1 reactor accident in Idaho and the Recuplex accident at Hanford are reviewed to identify problems common to emergency situations, lessons learned from accidents, criteria for emergency equipment, and recommendations for using robotics to solve problems during emergencies. Teleoperator equipment could be used to assess the extent of the damage and the condition of the reactor, retrieve dosimeters, evacuate and treat accident victims, clean up debris and decontaminate accident areas. 2 refs., 9 figs

  19. Uncertainties and severe-accident management

    International Nuclear Information System (INIS)

    Kastenberg, W.E.

    1991-01-01

    Severe-accident management can be defined as the use of existing and or alternative resources, systems, and actions to prevent or mitigate a core-melt accident. Together with risk management (e.g., changes in plant operation and/or addition of equipment) and emergency planning (off-site actions), accident management provides an extension of the defense-indepth safety philosophy for severe accidents. A significant number of probabilistic safety assessments have been completed, which yield the principal plant vulnerabilities, and can be categorized as (a) dominant sequences with respect to core-melt frequency, (b) dominant sequences with respect to various risk measures, (c) dominant threats that challenge safety functions, and (d) dominant threats with respect to failure of safety systems. Severe-accident management strategies can be generically classified as (a) use of alternative resources, (b) use of alternative equipment, and (c) use of alternative actions. For each sequence/threat and each combination of strategy, there may be several options available to the operator. Each strategy/option involves phenomenological and operational considerations regarding uncertainty. These include (a) uncertainty in key phenomena, (b) uncertainty in operator behavior, (c) uncertainty in system availability and behavior, and (d) uncertainty in information availability (i.e., instrumentation). This paper focuses on phenomenological uncertainties associated with severe-accident management strategies

  20. Risk Informed Design Using Integrated Vehicle Rapid Assessment Tools

    Data.gov (United States)

    National Aeronautics and Space Administration — A successful proof of concept was performed in FY 2012 integrating the Envision tool for parametric estimates of vehicle mass and the Rapid Response Risk Assessment...

  1. A preliminary assessment of the radiological impact of the Chernobyl reactor accident on the population of the European Community

    International Nuclear Information System (INIS)

    Morrey, M.; Brown, J.; Williams, J.A.; Crick, M.J.; Simmonds, J.R.; Hill, M.D.

    1988-01-01

    Following the Chernobyl accident the Commission of the European Communities asked the National Radiological Protection Board to carry out a preliminary assessment of the radiological consequences of the accident on the population of the European Community (EC). The aim of the study was to review information on the environmental contamination measured in member states of the EC; to make a preliminary assessment of individual and population doses for each country; to make an estimate of the resulting health impact and to indicate the effects of the various countermeasures taken by member states in terms of the reductions in both individual and population exposure which they produced. All of the main pathways by which people have been and will be exposed to radiation as a result of the accident were included in the assessment. The impact estimate is based on environmental measurements made during the month after the accident, and on calculations made using mathematical models of radionuclide transfer through the environment. The calculated effective doses to average individuals in EC countries from exposure over the next 50 years range from 0.3 μSv (in Portugal) to between about 300 and 500 μSv (in the FRG, Italy and Greece). The total collective effective dose to the population of EC countries, integrated over all time, is estimated to be about 80 000 man Sv. This may be compared to the collective effective dose from natural background radiation of about 500 000 man Sv every year. In some countries, the restrictions placed on consumption of some foods are estimated to have been effective in reducing doses to the most exposed individuals; the reduction being up to about a factor of 2. The results presented in this paper should therefore be regarded as preliminary

  2. Jules Horowitz reactor - Complementary safety assessment in the light of the Fukushima accident

    International Nuclear Information System (INIS)

    2011-01-01

    This CSA (Complementary Safety Assessment) analyses the robustness of the Jules Horowitz reactor (RJH) to extreme situations such as those that led to the Fukushima accident and proposes a series of improvements. RJH is being built on the Cadarache CEA's site. Robustness is the ability for the facility to withstand events beyond the level for which the facility was designed. Robustness is linked to safety margins but also to the situations leading to a sudden deterioration of the accident sequence (cliff edge effect). Safety is not only a matter of design or of engineered systems, it is also a matter of organization. So issues like RJH's crisis organization, the organization of radiation protection, and work organization via subcontracting are also taken into consideration. This report is divided into 9 main chapters: 1) main features of the RJH facility, 2) identification of cliff edge risks and of equipment essential for safety, 3) earthquake risk, 4) flood risk, 5) risks due to other extreme natural disasters, 6) the loss of electrical power supplies and of cooling systems, 7) management of severe accidents, 8) subcontracting policy, 9) synthesis and list of improvements. This study shows a globally good robustness of the RJH for the considered risks. Nevertheless it can considered relevant to increase the robustness of the plant on a few points: -) to increase the seismic safety margins of some pieces of equipment, -) to increase the robustness of the internal electrical power supplies, -) to increase the fuel cooling capacity, and -) to improve the management of the post-accidental period. (A.C.)

  3. Advanced surrogate model and sensitivity analysis methods for sodium fast reactor accident assessment

    International Nuclear Information System (INIS)

    Marrel, A.; Marie, N.; De Lozzo, M.

    2015-01-01

    Within the framework of the generation IV Sodium Fast Reactors, the safety in case of severe accidents is assessed. From this statement, CEA has developed a new physical tool to model the accident initiated by the Total Instantaneous Blockage (TIB) of a sub-assembly. This TIB simulator depends on many uncertain input parameters. This paper aims at proposing a global methodology combining several advanced statistical techniques in order to perform a global sensitivity analysis of this TIB simulator. The objective is to identify the most influential uncertain inputs for the various TIB outputs involved in the safety analysis. The proposed statistical methodology combining several advanced statistical techniques enables to take into account the constraints on the TIB simulator outputs (positivity constraints) and to deal simultaneously with various outputs. To do this, a space-filling design is used and the corresponding TIB model simulations are performed. Based on this learning sample, an efficient constrained Gaussian process metamodel is fitted on each TIB model outputs. Then, using the metamodels, classical sensitivity analyses are made for each TIB output. Multivariate global sensitivity analyses based on aggregated indices are also performed, providing additional valuable information. Main conclusions on the influence of each uncertain input are derived. - Highlights: • Physical-statistical tool for Sodium Fast Reactors TIB accident. • 27 uncertain parameters (core state, lack of physical knowledge) are highlighted. • Constrained Gaussian process efficiently predicts TIB outputs (safety criteria). • Multivariate sensitivity analyses reveal that three inputs are mainly influential. • The type of corium propagation (thermal or hydrodynamic) is the most influential

  4. Accident management

    International Nuclear Information System (INIS)

    Lutz, R.J.; Monty, B.S.; Liparulo, N.J.; Desaedeleer, G.

    1989-01-01

    The foundation of the framework for a Severe Accident Management Program is the contained in the Probabilistic Safety Study (PSS) or the Individual Plant Evaluations (IPE) for a specific plant. The development of a Severe Accident Management Program at a plant is based on the use of the information, in conjunction with other applicable information. A Severe Accident Management Program must address both accident prevention and accident mitigation. The overall Severe Accident Management framework must address these two facets, as a living program in terms of gathering the evaluating information, the readiness to respond to an event. Significant international experience in the development of severe accident management programs exist which should provide some direction for the development of Severe Accident Management in the U.S. This paper reports that the two most important elements of a Severe Accident Management Program are the Emergency Consultation process and the standards for measuring the effectiveness of individual Severe Accident Management Programs at utilities

  5. Conclusions on severe accident research priorities

    International Nuclear Information System (INIS)

    Klein-Heßling, W.; Sonnenkalb, M.; Jacquemain, D.; Clément, B.; Raimond, E.; Dimmelmeier, H.; Azarian, G.; Ducros, G.; Journeau, C.; Herranz Puebla, L.E.; Schumm, A.; Miassoedov, A.; Kljenak, I.; Pascal, G.; Bechta, S.; Güntay, S.; Koch, M.K.; Ivanov, I.; Auvinen, A.; Lindholm, I.

    2014-01-01

    Highlights: • Estimation of research priorities related to severe accident phenomena. • Consideration of new topics, partly linked to the severe accidents at Fukushima. • Consideration of results of recent projects, e.g. SARNET, ASAMPSA2, OECD projects. - Abstract: The objectives of the SARNET network of excellence are to define and work on common research programs in the field of severe accidents in Gen. II–III nuclear power plants and to further develop common tools and methodologies for safety assessment in this area. In order to ensure that the research conducted on severe accidents is efficient and well-focused, it is necessary to periodically evaluate and rank the priorities of research. This was done at the end of 2008 by the Severe Accident Research Priority (SARP) group at the end of the SARNET project of the 6th Framework Programme of European Commission (FP6). This group has updated this work in the FP7 SARNET2 project by accounting for the recent experimental results, the remaining safety issues as e.g. highlighted by Level 2 PSA national studies and the results of the recent ASAMPSA2 FP7 project. These evaluation activities were conducted in close relation with the work performed under the auspices of international organizations like OECD or IAEA. The Fukushima-Daiichi severe accidents, which occurred while SARNET2 was running, had some effects on the prioritization and definition of new research topics. Although significant progress has been gained and simulation models (e.g. the ASTEC integral code, jointly developed by IRSN and GRS) were improved, leading to an increased confidence in the predictive capabilities for assessing the success potential of countermeasures and/or mitigation measures, most of the selected research topics in 2008 are still of high priority. But the Fukushima-Daiichi accidents underlined that research efforts had to focus still more to improve severe accident management efficiency

  6. Human factors review for nuclear power plant severe accident sequence analysis

    International Nuclear Information System (INIS)

    Krois, P.A.; Haas, P.M.

    1985-01-01

    The paper discusses work conducted to: (1) support the severe accident sequence analysis of a nuclear power plant transient based on an assessment of operator actions, and (2) develop a descriptive model of operator severe accident management. Operator actions during the transient are assessed using qualitative and quantitative methods. A function-oriented accident management model provides a structure for developing technical operator guidance on mitigating core damage preventing radiological release

  7. Application of NUREG-1150 methods and results to accident management

    International Nuclear Information System (INIS)

    Dingman, S.; Sype, T.; Camp, A.; Maloney, K.

    1991-01-01

    The use of NUREG-1150 and similar probabilistic risk assessments in the Nuclear Regulatory Commission (NRC) and industry risk management programs is discussed. Risk management is more comprehensive than the commonly used term accident management. Accident management includes strategies to prevent vessel breach, mitigate radionuclide releases from the reactor coolant system, and mitigate radionuclide releases to the environment. Risk management also addresses prevention of accident initiators, prevention of core damage, and implementation of effective emergency response procedures. The methods and results produced in NUREG-1150 provide a framework within which current risk management strategies can be evaluated, and future risk management programs can be developed and assessed. Examples of the use of the NUREG-1150 framework for identifying and evaluating risk management options are presented. All phases of risk management are discussed, with particular attention given to the early phases of accidents. Plans and methods for evaluating accident management strategies that have been identified in the NRC accident management program are discussed

  8. Application of NUREG-1150 methods and results to accident management

    International Nuclear Information System (INIS)

    Dingman, S.; Sype, T.; Camp, A.; Maloney, K.

    1990-01-01

    The use of NUREG-1150 and similar Probabilistic Risk Assessments in NRC and industry risk management programs is discussed. ''Risk management'' is more comprehensive than the commonly used term ''accident management.'' Accident management includes strategies to prevent vessel breach, mitigate radionuclide releases from the reactor coolant system, and mitigate radionuclide releases to the environment. Risk management also addresses prevention of accident initiators, prevention of core damage, and implementation of effective emergency response procedures. The methods and results produced in NUREG-1150 provide a framework within which current risk management strategies can be evaluated, and future risk management programs can be developed and assessed. Examples of the use of the NUREG-1150 framework for identifying and evaluating risk management options are presented. All phases of risk management are discussed, with particular attention given to the early phases of accidents. Plans and methods for evaluating accident management strategies that have been identified in the NRC accident management program are discussed. 2 refs., 3 figs

  9. Fission product behaviour in severe accidents

    International Nuclear Information System (INIS)

    Jokiniemi, J.; Auvinen, A.; Maekynen, J.; Valmari, T.

    1998-01-01

    The understanding of fission product (FP) behaviour in severe accidents is important for source term assessment and accident mitigation measures. For example in accident management the operator needs to know the effect of different actions on the behaviour and release of fission products. At VTT fission product behaviour have been studied in different national and international projects. In this presentation the results of projects in EU funded 4th framework programme Nuclear Fission Safety 1994-1998 are reported. The projects are: fission product vapour/aerosol chemistry in the primary circuit (FI4SCT960020), aerosol physics in containment (FI4SCT950016), revaporisation of test samples from Phebus fission products (FI4SCT960019) and assessment of models for fission product revaporisation (FI4SCT960044). Also results from the national project 'aerosol experiments in the Victoria facility' funded by IVO PE and VTT Energy are reported

  10. Airborne concentrations of radioactive materials in severe accidents

    International Nuclear Information System (INIS)

    Ross, D.F. Jr.; Denning, R.S.

    1989-01-01

    Radioactive materials would be released to the containment building of a commercial nuclear reactor during each of the stages of a severe accident. Results of analyses of two accident sequences are used to illustrate the magnitudes of these sources of radioactive materials, the resulting airborne mass concentrations, the characteristics of the airborne aerosols, the potential for vapor forms of radioactive materials, the effectiveness of engineered safety features in reducing airborne concentrations, and the release of radioactive materials to the environment. Ability to predict transport and deposition of radioactive materials is important to assessing the performance of containment safety features in severe accidents and in the development of accident management procedures to reduce the consequences of severe accidents

  11. Severe accident mitigation through containment design

    International Nuclear Information System (INIS)

    Bergeron, K.D.

    1990-01-01

    Recent U.S. Department of Energy plans to construct a Heavy Water Reactor for the production of defense nuclear materials have created a unique opportunity to explore ways to mitigate severe accident concerns in the design stage. Drawing on an extensive background in US-NRC-sponsored severe accident work, Sandia National Laboratories has been exploring a number of Heavy Water New Production Reactor (HW-NPR) containment design strategies that might mitigate the consequences of a core-melt accident without greatly impacting construction cost or reactor operations. Severe accident specialists have undertaken these assessments with the intent of providing the plant designers with some of the phenomenological advantages and disadvantages of various mitigation strategies. This paper will highlight some of the more interesting concepts and summarize the results obtained. (author). 9 refs., 2 tabs

  12. Severe accident mitigation through containment design

    International Nuclear Information System (INIS)

    Bergeron, K.D.

    1990-01-01

    Recent US Department of Energy plans to construct a Heavy Water Reactor for the production of defense nuclear materials have created a unique opportunity to explore ways to mitigate severe accident concerns in the design stage. Drawing on an extensive background in USNRC-sponsored severe accident work, Sandia National Laboratories has been exploring a number of Heavy Water New Production Reactor (HW-NPR) containment design strategies that might mitigate the consequences of a core-melt accident without greatly impacting construction cost or reactor operations. Severe accident specialists have undertaken these assessments with the intent of providing the plant designers with some of the phenomenological advantages and disadvantages of various mitigation strategies. This paper will highlight some of the more interesting concepts and summarize the results obtained. 9 refs., 2 tabs

  13. Reactivity initiated accident analyses for the safety assessment of upgraded JRR-3

    International Nuclear Information System (INIS)

    Harami, Taikan; Uemura, Mutsumi; Ohnishi, Nobuaki

    1984-08-01

    JRR-3, currently a heavy water moderated and cooled 10 MW reactor, is to be upgraded to a light water moderated and cooled, heavy water reflected 20 MW reactor. This report describes the analytical results of reactivity initiated accidents for the safety assessment of upgraded JRR-3. The following five cases have been selected for the assessment; (1) uncontrolled control rod withdrawal from zero power, (2) uncontrolled control rod withdrawal from full power, (3) removal of irradiation samples, (4) increase of primary coolant flow, (5) failure of heavy water tank. Parameter studies have been made for each of the above cases to cover possible uncertainties. All analyses have been made by a computer code EUREKA-2. The results show that the safety criteria for upgraded JRR-3 are all met and the adequacy of the design is confirmed. (author)

  14. Strategies for the prevention and mitigation of severe accidents

    International Nuclear Information System (INIS)

    Ader, C.; Heusener, G.; Snell, V.G.

    1999-01-01

    The currently operating nuclear power plants have, in general, achieved a high level of safety, as a result of design philosophies that have emphasized concepts such as defense-in-depth. This type of an approach has resulted in plants that have robust designs and strong containments. These designs were later found to have capabilities to protect the public from severe accidents (accidents more severe than traditional design basis in which substantial damage is done to the reactor core). In spite of this high level of safety, it has also been recognized that future plants need to be designed to achieve an enhanced level of safety, in particular with respect to severe accidents. This has led both regulatory authorities and utilities to develop guidance and/or requirements to guide plant designers in achieving improved severe accident performance through prevention and mitigation. The considerable research programs initiated after the TMI-2 accident have provided a large body of technical data, analytical methods, and the expertise necessary to provide for an understanding of a range of severe accident phenomena. This understanding of the ways severe accidents can progress and challenge containments, combined with the wide use of probabilistic safety assessments, have provided designers of evolutionary water cooled reactors opportunities to develop designs that minimize the challenges to the plant and to the public from severe accidents, including the development of accident management strategies intended to further reduce the risk of severe accidents. This paper describes some of the recent progress made in the understanding of severe accidents and related safety assessment methodology and how this knowledge has supported the incorporation of features into representative evolutionary designs that will prevent or mitigate many of the severe accident challenges present in current plants. (author)

  15. The impact of the Fukushima nuclear accident on marine biota: Retrospective assessment of the first year and perspectives

    NARCIS (Netherlands)

    Vives i Battle, Jordi; Aono, Tatsuo; Brown, Justin E.; Hosseini, Ali; Garnier-Laplace, Jacqueline; Sazykina, Tatiana; Steenhuisen, Frits; Strand, Per

    2014-01-01

    An international study under the United Nations Scientific Committee on the Effects of Atomic Radiation (UNSCEAR) was performed to assess radiological impact of the nuclear accident at the Fukushima-Daiichi Nuclear Power Station (FDNPS) on the marine environment. This work constitutes the first

  16. The accidents during shutdown conditions Temelin NPP

    International Nuclear Information System (INIS)

    Sykora, M.; Mlady, O.

    1996-01-01

    Two parallel activities oriented for the accidents during shutdown conditions are performed at Temelin NPP: Development of symptom based emergency operating procedures (EOPs) applicable for the accidents which could occur during operational modes 1 through 4; independent evaluation of plant safety as part of the Temelin Shutdown probabilistic assessment to define the accidents which could occur during mode 5 and 6 for which the EOPs must be extended. Both these activities are in progress now because Temelin plant is still in the construction phase

  17. Regulatory impact of nuclear reactor accident source term assumptions. Technical report

    International Nuclear Information System (INIS)

    Pasedag, W.F.; Blond, R.M.; Jankowski, M.W.

    1981-06-01

    This report addresses the reactor accident source term implications on accident evaluations, regulations and regulatory requirements, engineered safety features, emergency planning, probabilistic risk assessment, and licensing practice. Assessment of the impact of source term modifications and evaluation of the effects in Design Basis Accident analyses, assuming a change of the chemical form of iodine from elemental to cesium iodide, has been provided. Engineered safety features used in current LWR designs are found to be effective for all postulated combinations of iodine source terms under DBA conditions. In terms of potential accident consequences, it is not expected that the difference in chemical form between elemental iodine and cesium iodide would be significant. In order to account for the current information on source terms, a spectrum of accident scenerios is discussed to realistically estimate the source terms resulting from a range of potential accident conditions

  18. [Construction of indicators for assessing the policy of reducing accidents and violence for the elderly care].

    Science.gov (United States)

    de Souza, Edinilsa Ramos; Correia, Bruna Soares Chaves

    2010-09-01

    The follow article presents the methodology used to construct indicators to assess the implementation of the National Policy of Mortality Reduction by Accidents and Violence, of public health policies aimed at the elderly and the Mental Health Policy developed in the research entitled Diagnostic Analysis of Local Health Systems to Meet the Problems Caused by Accidents and Violence against Elderly. These indicators were applied in health services that meet elderly victims of accidents and violence in five Brazilian cities: Brasília, Curitiba, Manaus, Recife and Rio de Janeiro. It started with 124 indicatives to assistance level pre-hospital, hospital, rehabilitation and CAPS. There was a selection phase where indicatives without discriminatory capability were eliminated. It was also decided by the relaxation of some criteria are creating new categories. After this step, a group of the experts validate the questionnaires created with these indicators by using Nominal Technical Group. We performed the Kruskal-Wallis test and a graphical analysis. In the final round, the indicators were grouped by similarity, building synthetic indices, 60 indicatives left. These methods can be used in other organizations to evaluate and adjust their health care based on public policies.

  19. Proceedings of the workshop on operator training for severe accident management and instrumentation capabilities during severe accidents

    International Nuclear Information System (INIS)

    2001-01-01

    This Workshop was organised in collaboration with Electricite de France (Service Etudes et Projets Thermiques et Nucleaires). There were 34 participants, representing thirteen OECD Member countries, the Russian Federation and the OECD/NEA. Almost half the participants represented utilities. The second largest group was regulatory authorities and their technical support organisations. Basically, the Workshop was a follow-up to the 1997 Second Specialist Meeting on Operator Aids for Severe Accident Management (SAMOA-2) [Reports NEA/CSNI/R(97)10 and 27] and to the 1992 Specialist Meeting on Instrumentation to Manage Severe Accidents [Reports NEA/CSNI/R(92)11 and (93)3]. It was aimed at sharing and comparing progress made and experience gained from these two meetings, emphasizing practical lessons learnt during training or incidents as well as feedback from instrumentation capability assessment. The objectives of the Workshop were therefore: - to exchange information on recent and current activities in the area of operator training for SAM, and lessons learnt during the management of real incidents ('operator' is defined hear as all personnel involved in SAM); - to compare capabilities and use of instrumentation available during severe accidents; - to monitor progress made; - to identify and discuss differences between approaches relevant to reactor safety; - and to make recommendations to the Working Group on the Analysis and Management of Accidents and the CSNI (GAMA). The meeting confirmed that only limited information is needed for making required decisions for SAM. In most cases existing instrumentation should be able to provide usable information. Additional instrumentation requirements may arise from particular accident management measures implemented in some plants. In any case, depending on the time frame where the instrumentation should be relied upon, it should be assessed whether it is likely to survive the harsh environmental conditions it will be exposed

  20. Joint CEC/OECD(NEA) workshop on recent advances in reactor accident consequence assessment

    International Nuclear Information System (INIS)

    Olast, M.; Sinnaeve, J.

    1988-01-01

    The workshop on probabilistic accident consequence assessment techniques and their applications aims at a review of the present knowledge of all the work in this field. This includes the atmospheric dispersion and deposition modelling, with comparison of the different approaches, the exposure pathways with emphasis on post-deposition processes, the health effects with emphasis on the consequences of the Hiroshima and Nagasaki data re-evaluation, the countermeasures and their economic consequences, the uncertainty analysis of the models and finally the applications of these models as aids to decision making

  1. Analysis of transients aimed at assessing the feasibility of eliminating the HO-2 accident protection and the ''moderate leak'' SOB signal

    International Nuclear Information System (INIS)

    Sommer, J.

    1993-12-01

    Accidents and transient processes were analyzed in order to assess the feasibility of eliminating the 2nd level accident protection (HO-2). All analyses were performed in 3 alternatives, viz. for the normal performance of HO-2, for the HO-2 signals being transferred to the 1st level accident protection (HO-1), and for a complete elimination of HO-2. Transfer of HO-2 signals to HO-1 definitely brings about an improvement of the nuclear power plant operation safety. There is no evidence indicating that the safety would decrease intolerably if HO-2 were eliminated altogether. Elimination of the ''moderate leak'' safety system does not require any thermohydraulic analysis to be performed. 18 refs

  2. Rapid urease test and endoscopic data in dynamic in case of peptic ulcers in former Chernobyl accident clean-up workers

    International Nuclear Information System (INIS)

    Orlikovs, G.; Seleznovs, J.; Farbtuha, T.; Straupeniece, I.; Kuzenko, A.; Pokrotnieks, J.

    2002-01-01

    111 peptic ulcer patients former Chernobyl accident clean-up workers were examined. The patients have been working in the damaged zone during 1986-87 years receiving small radiation dosages. Chronic peptic gastric and duodenal ulcers appeared in them later. The goal of the trial is to investigate the effectiveness of Helicobacter pylori eradication measures in triple-therapy course of medium duration (10 days) include ranitidine, amoxycillinum, and methronidazolum. Upper gastrointestinal endoscopy was accompanied by rapid urease test. The test was repeated after a 1-year period. Analysing the data results we ascertain that the prolonged success of triple-therapy is rather ineffective and have unclear correlation with endoscopic data. This is much evident in case of gastric ulcers. These results testify that clinical course of peptic ulcers in case of post-radiation syndrome differs from the same in population. (authors)

  3. The Assesment Of Radioactive Accident Management On The RSG-GAS

    International Nuclear Information System (INIS)

    Soejoedi, Agoes; Karmana, Endang

    2000-01-01

    In the operational reactor facilities include RSG-GAS, safety factor for radioactive accident very important to be prioritized. Till now the anticipate happening radioactive accident on the RSG-GAS threat only by the RSG-GAS Operation Manual. For increasing the working function need to create radioactive accident management by facility level. From studying result which source IAEA guidebook, can be composed the assessment accident management of radioactive the RSG-GAS.The sketching this accident management of radioactive to be hoped can helping P2TRR organization by handling radioactive accident if this moment happen on the RSG-GAS

  4. Iodine chemistry effect on source term assessments. A MELCOR 186 YT study of a PWR severe accident sequence

    International Nuclear Information System (INIS)

    Herranz, Luis E.; Garcia, Monica; Otero, Bernadette

    2009-01-01

    Level-2 Probabilistic Safety Analysis has demonstrated to be a powerful tool to give insights into multiple aspects concerning severe accidents: phenomena with the greatest potential to lead to containment failure, safety systems performance and, even, to identify any additional accident management that could mitigate the consequences of such an even, etc. A major result of level-2 PSA is iodine content in Source Term since it is the main responsible for the radiological impact during the first few days after a hypothetical severe accident. Iodine chemistry is known to considerably affect iodine behavior and although understanding has improved substantially since the early 90's, a thorough understanding is still missing and most PSA studies do not address it when assessing severe accident scenarios. This paper emphasizes the quantitative and qualitative significance of considering iodine chemistry in level-2 PSA estimates. To do so a cold leg break, low pressure severe accident sequence of an actual pressurized water reactor has been analyzed with the MELCOR 1.8.6 YT code. Two sets of calculations, with and without chemistry, have been carried out and compared. The study shows that iodine chemistry could result in an iodine release to environment about twice higher, most of which would consist of around 60% of iodine in gaseous form. From these results it is concluded that exploratory studies on the potential effect of iodine chemistry on source term estimates should be carried out. (author)

  5. Nuclear ship accidents

    International Nuclear Information System (INIS)

    Oelgaard, P.L.

    1993-05-01

    In this report available information on 28 nuclear ship accident and incidents is considered. Of these 5 deals with U.S. ships and 23 with USSR ships. The ships are in almost all cases nuclear submarines. Only events that involve the nuclear propulsion plants, radiation exposures, fires/explosions and sea water leaks into the submarines are considered. Comments are made on each of the events, and at the end of the report an attempt is made to point out the weaknesses of the submarine designs which have resulted in the accidents. It is emphasized that much of the available information is of a rather dubious nature. consequently some of the assessments made may not be correct. (au)

  6. Should evacuation conditions after a nuclear accident be revised?

    International Nuclear Information System (INIS)

    Nifenecker, H.

    2011-01-01

    The author proposes to draw lessons from the Fukushima accident, notably in the field of post-accident management. He discusses the definition of an as widely understandable as possible method of description of risks related to irradiations after a nuclear accident. As these irradiations are mainly low dose ones which have a carcinogenic effect, he proposes to assess the average life expectancy loss due to an irradiation. Then, this risk can be easily compared with other risks like air pollution, smoking and passive smoking, and so on. Then, once this risk assessment method is well defined, it is possible to associate the inhabitants of contaminated areas to the post-accident management. They could then decide to go back to their homes or not with full knowledge of the facts

  7. Improving Accident Tolerance of Nuclear Fuel with Coated Mo-alloy Cladding

    Directory of Open Access Journals (Sweden)

    Bo Cheng

    2016-02-01

    Full Text Available In severe loss of coolant accidents (LOCA, similar to those experienced at Fukushima Daiichi and Three Mile Island Unit 1, the zirconium alloy fuel cladding materials are rapidly heated due to nuclear decay heating and rapid exothermic oxidation of zirconium with steam. This heating causes the cladding to rapidly react with steam, lose strength, burst or collapse, and generate large quantities of hydrogen gas. Although maintaining core cooling remains the highest priority in accident management, an accident tolerant fuel (ATF design may extend coping and recovery time for operators to restore emergency power, and cooling, and achieve safe shutdown. An ATF is required to possess high resistance to steam oxidation to reduce hydrogen generation and sufficient mechanical strength to maintain fuel rod integrity and core coolability. The initiative undertaken by Electric Power Research Institute (EPRI is to demonstrate the feasibility of developing an ATF cladding with capability to maintain its integrity in 1,200–1,500°C steam for at least 24 hours. This ATF cladding utilizes thin-walled Mo-alloys coated with oxidation-resistant surface layers. The basic design consists of a thin-walled Mo alloy structural tube with a metallurgically bonded, oxidation-resistant outer layer. Two options are being investigated: a commercially available iron, chromium, and aluminum alloy with excellent high temperature oxidation resistance, and a Zr alloy with demonstrated corrosion resistance. As these composite claddings will incorporate either no Zr, or thin Zr outer layers, hydrogen generation under severe LOCA conditions will be greatly reduced. Key technical challenges and uncertainties specific to Mo alloy fuel cladding include: economic core design, industrial scale fabricability, radiation embrittlement, and corrosion and oxidation resistance during normal operation, transients, and severe accidents. Progress in each aspect has been made and key results are

  8. Dementia and traffic accidents: a Danish register-based cohort study

    DEFF Research Database (Denmark)

    Petersen, Jindong Ding; Siersma, Volkert Dirk; Nielsen, CT

    2016-01-01

    BACKGROUND: As a consequence of a rapid growth of an ageing population, more people with dementia are expected on the roads. Little is known about whether these people are at increased risk of road traffic-related accidents. OBJECTIVE: Our study aims to investigate the risk of road traffic...... Central Research Register, and/or (2) at least one dementia diagnosis-related drug prescription registration in the Danish National Prescription Registry. Police-, hospital-, and emergency room-reported road traffic-related accidents occurred within the study follow-up are defined as the study outcome...... selection bias due to nonparticipation and loss to follow-up. Furthermore, this ensures that the study results are reliable and generalizable. However, underreporting of traffic-related accidents may occur, which will limit estimation of absolute risks....

  9. Assessing the consequences in a nuclear accident scenario at Cernavoda NPP

    International Nuclear Information System (INIS)

    Margeanu, Sorin; Angelescu, Tatiana

    2004-01-01

    Having in view a possible nuclear incident, considerable planning is necessary to reduce at manageable levels the types of decisions leading to effective responses concerning the public protection. One of the most important parts of an emergency response plan is the computerized system which allows to predict the radiological impact of the accident and to provide information in a manageable and effective form for evaluating alternative countermeasure strategies in the various stages of the accident. In this paper the PC-COSYMA results for early containment failure of a CANDU reactor are presented. The deterministic health effects arising in nuclear accident situation are also presented. As source term we have used the core inventory obtained with ORIGEN computer code. The essential input parameters for PC-COSYMA computer code are also done. (authors)

  10. The Fukushima Daiichi Accident. Technical Volume 1/5. Description and Context of the Accident. Annexes

    International Nuclear Information System (INIS)

    2015-08-01

    The Fukushima Daiichi Accident consists of a Report by the IAEA Director General and five technical volumes. It is the result of an extensive international collaborative effort involving five working groups with about 180 experts from 42 Member States with and without nuclear power programmes and several international bodies. It provides a description of the accident and its causes, evolution and consequences, based on the evaluation of data and information from a large number of sources available at the time of writing. The Fukushima Daiichi Accident will be of use to national authorities, international organizations, nuclear regulatory bodies, nuclear power plant operating organizations, designers of nuclear facilities and other experts in matters relating to nuclear power, as well as the wider public. The set contains six printed parts and five supplementary CD-ROMs. Contents: Report by the Director General; Technical Volume 1/5, Description and Context of the Accident; Technical Volume 2/5, Safety Assessment; Technical Volume 3/5, Emergency Preparedness and Response; Technical Volume 4/5, Radiological Consequences; Technical Volume 5/5, Post-accident Recovery; Annexes. The Report by the Director General is available separately in Arabic, Chinese, English, French, Russian, Spanish and Japanese

  11. [Theory and testing of an accident risk assessment system based on prior experience].

    Science.gov (United States)

    Montresor, Michele; Ricci, Paolo; Giroletti, Elio

    2015-01-01

    to improve the "National Project: Integrated investigations for an indepth analysis of cases of Fatal Accidents", a project which, on one hand, is too open to interpretation of events, while, on the other, does not offer the possibility to analyse external factors which are often at the basis of accidents in the workplace. identification and weighting criteria regarding causes of accident have been established and correlated by means of a specific algorithm, with the aim of making them numerically measurable. This has made it possible to use them as indicators to identify lines of priority in prevention planning. The theoretical model has been tested in an analysis of 35 work accidents which occurred in a firm in Mantova. the model has been evaluated in comparison to the analysis which was previously used to examine cases of work-related accidents and it has proved to be more efficient in the move towards establishing preventative action at the beginning of a chain of events. While maintaining the "Learning from mistakes" model, the method here proposed represents an extension and an implementation of previous practices. It is an effective operative method for companies, offering both a qualitative and quantitative analysis of work-related accidents with a view to their prevention.

  12. Risk evaluation of accident management strategies

    International Nuclear Information System (INIS)

    Dingman, S.; Camp, A.

    1992-01-01

    The use of Probabilistic Risk Assessment (PRA) methods to evaluate accident management strategies in nuclear power plants discussed in this paper. The PRA framework allows an integrated evaluation to be performed to give the full implications of a particular strategy. The methodology is demonstrated for a particular accident management strategy, intentional depressurization of the reactor coolant system to avoid containment pressurization during the ejection of molten debris at vessel breach

  13. Test Data for USEPR Severe Accident Code Validation

    Energy Technology Data Exchange (ETDEWEB)

    J. L. Rempe

    2007-05-01

    This document identifies data that can be used for assessing various models embodied in severe accident analysis codes. Phenomena considered in this document, which were limited to those anticipated to be of interest in assessing severe accidents in the USEPR developed by AREVA, include: • Fuel Heatup and Melt Progression • Reactor Coolant System (RCS) Thermal Hydraulics • In-Vessel Molten Pool Formation and Heat Transfer • Fuel/Coolant Interactions during Relocation • Debris Heat Loads to the Vessel • Vessel Failure • Molten Core Concrete Interaction (MCCI) and Reactor Cavity Plug Failure • Melt Spreading and Coolability • Hydrogen Control Each section of this report discusses one phenomenon of interest to the USEPR. Within each section, an effort is made to describe the phenomenon and identify what data are available modeling it. As noted in this document, models in US accident analysis codes (MAAP, MELCOR, and SCDAP/RELAP5) differ. Where possible, this report identifies previous assessments that illustrate the impact of modeling differences on predicting various phenomena. Finally, recommendations regarding the status of data available for modeling USEPR severe accident phenomena are summarized.

  14. The relationships between organizational and individual variables to on-the-job driver accidents and accident-free kilometres.

    Science.gov (United States)

    Caird, J K; Kline, T J

    2004-12-01

    Highway fatalities are the leading cause of fatal work injuries in the US, accounting for approximately 1 in 4 of the 5900 job-related deaths during 2001. The present study focused on the contribution of organizational factors and driver behaviours to on-the-job driving accidents in a large Western Canadian corporation. A structural equation modelling (SEM) approach was used which allows researchers to test a complex set of relationships within a global theoretical framework. A number of scales were used to assess organizational support, driver errors, and driver behaviours. The sample of professional drivers that participated allowed the recording of on-the-job accidents and accident-free kilometres from their personnel files. The pattern of relationships in the fitted model, after controlling for exposure and social desirability, provides insight into the role of organizational support, planning, environment adaptations, fatigue, speed, errors and moving citations to on-the-job accidents and accident-free kilometres. For example, organizational support affected the capacity to plan. Time to plan work-related driving was found to predict accidents, fatigue and adaptations to the environment. Other interesting model paths, SEM limitations, future research and recommendations are elaborated.

  15. Probabilistic Dose Assessment from SB-LOCA Accident in Ujung Lemahabang Using TMI-2 Source Term

    Directory of Open Access Journals (Sweden)

    Sunarko

    2017-01-01

    Full Text Available Probabilistic dose assessment and mapping for nuclear accident condition are performed for Ujung Lemahabang site in Muria Peninsula region in Indonesia. Source term is obtained from Three-Mile Island unit 2 (TMI-2 PWR-type SB-LOCA reactor accident inverse modeling. Effluent consisted of Xe-133, Kr-88, I-131, and Cs-137 released from a 50 m stack. Lagrangian Particle Dispersion Method (LPDM and 3-dimensional mass-consistent wind field are employed to obtain surface-level time-integrated air concentration and spatial distribution of ground-level total dose in dry condition. Site-specific meteorological data is obtained from hourly records obtained during the Site Feasibility Study period in Ujung Lemahabang. Effluent is released from a height of 50 meters in uniform rate during a 6-hour period and the dose is integrated during this period in a neutrally stable atmospheric condition. Maximum dose noted is below regulatory limit of 1 mSv and radioactive plume is spread mostly to the W-SW inland and to N-NE from the proposed plant to Java Sea. This paper has demonstrated for the first time a probabilistic analysis method for assessing possible spatial dose distribution, a hypothetical release, and a set of meteorological data for Ujung Lemahabang region.

  16. Revised accident source terms for light-water reactors

    Energy Technology Data Exchange (ETDEWEB)

    Soffer, L. [Nuclear Regulatory Commission, Washington, DC (United States)

    1995-02-01

    This paper presents revised accident source terms for light-water reactors incorporating the severe accident research insights gained in this area over the last 15 years. Current LWR reactor accident source terms used for licensing date from 1962 and are contained in Regulatory Guides 1.3 and 1.4. These specify that 100% of the core inventory of noble gases and 25% of the iodine fission products are assumed to be instantaneously available for release from the containment. The chemical form of the iodine fission products is also assumed to be predominantly elemental iodine. These assumptions have strongly affected present nuclear air cleaning requirements by emphasizing rapid actuation of spray systems and filtration systems optimized to retain elemental iodine. A proposed revision of reactor accident source terms and some im implications for nuclear air cleaning requirements was presented at the 22nd DOE/NRC Nuclear Air Cleaning Conference. A draft report was issued by the NRC for comment in July 1992. Extensive comments were received, with the most significant comments involving (a) release fractions for both volatile and non-volatile species in the early in-vessel release phase, (b) gap release fractions of the noble gases, iodine and cesium, and (c) the timing and duration for the release phases. The final source term report is expected to be issued in late 1994. Although the revised source terms are intended primarily for future plants, current nuclear power plants may request use of revised accident source term insights as well in licensing. This paper emphasizes additional information obtained since the 22nd Conference, including studies on fission product removal mechanisms, results obtained from improved severe accident code calculations and resolution of major comments, and their impact upon the revised accident source terms. Revised accident source terms for both BWRS and PWRS are presented.

  17. Biological and medical consequences of nuclear accidents

    International Nuclear Information System (INIS)

    Latarjet, R.

    1988-01-01

    The study of the medical and biological consequences of the nuclear accidents is a vast program. The Chernobyl accident has caused some thirty deceases: Some of them were rapid and the others occurred after a certain time. The particularity of these deaths was that the irradiation has been associated to burns and traumatisms. The lesson learnt from the Chernobyl accident is to treat the burn and the traumatism before treating the irradiation. Contrary to what the research workers believe, the first wave of deaths has passed between 15 and 35 days and it has not been followed by any others. But the therapeutic lesson drawn from the accident confirm the research workers results; for example: the radioactive doses band that determines where the therapy could be efficacious or not. the medical cares dispensed to the irradiated people in the hospital of Moscow has confirmed that the biochemical equilibrium of proteinic elements of blood has to be maintained, and the transfusion of the purified elements are very important to restore a patient to health, and the sterilization of the medium (room, food, bedding,etc...) of the patient is indispensable. Therefore, it is necessary to establish an international cooperation for providing enough sterilized rooms and specialists in the irradiation treatment. The genetic consequences and cancers from the Chernobyl accident have been discussed. It is impossible to detect these consequences because of their negligible percentages. (author)

  18. Developing a comprehensive and accountable database after a radiological accident

    International Nuclear Information System (INIS)

    Berry, H.A.; Burson, Z.G.

    1986-09-01

    After a radiological accident occurs, it is highly desirable to promptly begin developing a comprehensive and accountable environmental database both for immediate health and safety needs and for long-term documentation. The need to assess and evaluate the impact of the accident as quickly as possible is always very urgent, the technical integrity of the data must also be assured and maintained. Care must therefore be taken to log, collate, and organize the environmental data into a complete and accountable database. The key components of the database development are summarized as well as the experience gained in organizing and handling environmental data acquired during: (1) TMI (1979); (2) the St. Lucie Reactor Accident Exercise (through the Federal Radiological Measurement and Assessment Center (FRMAC), March 1984); (3) the Sequoyah Fuels Inc., uranium hexafluoride accident near Gore, Oklahoma (January 1986); and (4) Chernobyl reactor accident in Russia (April 1986)

  19. Report of the Fukushima nuclear accident by the National Academy of Science. Lessons learned from the Fukushima nuclear accident for improving safety of U.S. nuclear plants

    International Nuclear Information System (INIS)

    Nariai, Hideki

    2014-01-01

    U.S. National Academy of Science investigated the accident at the Fukushima Daiichi nuclear plant initiated by the Great East Japan Earthquake for two years and published a draft report in July 24, 2014. Investigation results were summarized in nine new findings and made ten recommendations in a wide horizon; (1) hardware countermeasures against severe accidents and training of operators, (2) upgrade of risk assessment capability for beyond design basis accident, (3) incorporation of new information about hazards in safety regulations, (4) needed improvement of off-site emergency preparedness, and (5) improvements of nuclear safety culture. New information about hazards related with tsunami assessment, new risk assessment for beyond design basis accident, advice of foreigner resident evacuations, regulatory capture, and safety culture and regulator's specialty were discussed as Japanese issues. (T. Tanaka)

  20. Priorities for Addressing Severe Accident and L3PSA in Radiation Environmental Report

    Energy Technology Data Exchange (ETDEWEB)

    Jang, M. S.; Kang, H. S.; Kim, S. R. [NESS, Daejeon (Korea, Republic of); Yang, Y. H.; Yoon, Y. I. [KHNP, Daejeon (Korea, Republic of)

    2016-05-15

    Domestic rules for the radiation environment impact assessment were enacted based on NUREG-0555, the guidance to the nuclear regulatory commission staff in implementing provisions of 10 CFR 51, 'environmental protection regulations for domestic licensing and related regulatory functions', related to NPPs. A revised document of NUREG-0555 was published in 2000 as NUREG-1555, Vol. 1 and 2. The related domestic rules would have made some revisions in accordance with NUREG-1555 in 2016. In this paper, we would introduce the new technical standards and review legal and technical issues on legislation. There are three legal and technical issues on revised legislation that includes severe accidents and L3PSA results in RER. First, it may need a regular and continuing education for the severe accident concept, probabilistic assessment method and conservative assumptions for severe accident, how to interpret the assessment results, the probability of a severe accident, SAMA and etc. to obtain the public understanding for severe accident. Second, it needs the development of strategy and technology not only to evaluate the risk of multi-unit accidents and failure case and the impacts of inter-unit shared systems and common events for the probabilistic assessment of severe accidents but also to solve many potential L3PSA challenges. Finally, the cost-beneficial SAMAs analysis would be added in radiation environmental impact and severe accident impact analysis.

  1. Severe Accident Research Network (SARNET). Level 2 PSA work package: comparison of partners methods for uncertainties assessment

    International Nuclear Information System (INIS)

    Chaumont, B.; Haesendonck, M.; Vidal, S.; Eyink, J.; Loeffler, H.; Radu, G.; Kopustinskas, V.; Ming, A.; Guntay, S.; Gustavsson, V.; Ivanov, I.; Dienstbier, J.; Bareith, A.; Hollo, E.; Lajtha, G.

    2007-01-01

    The PSA2 work package (PSA2 WP) is a part of the Joined Programme Activity of the European Severe Accident Network (SARNET) related to level 2 PSA methodologies. The general objectives of this work package is to provide a comparison of the different methodologies used or under development for level 2 PSA application by the partners involved in the work package and to promote their harmonization. The PSA2 WP is organized into three main topics: methodologies in general, methodologies for uncertainties assessment, and dynamic reliability methods. The different tasks initially defined for these three topics are shortly described and the partners involved identified. Attention is then paid on the methodologies used so far by the different partners to assess the uncertainties in their level 2 PSA. A review of partners approaches to assess - as far as possible - the different sources of possible uncertainties is done for the different following topics: - uncertainties propagated from the level 1 PSA, - uncertainties (in sense of approximation) due to the binning of the level 1 sequences in Plant Damage, - uncertainties related to the structure of the Accident Progression Event Tree, - uncertainties related to the probabilities of stochastic events (system failure or recovery, human actions, some physical phenomena such as ignition of hydrogen combustion or triggering of steam explosion), - uncertainties elated to the modelling of the different physical phenomena, - uncertainties related to the cut-off frequency used in the probabilistic quantification of the Accident Progression Event Tree; - uncertainties related to the binning of level 2 sequences in Release Categories (variables not considered, values of eventual continuous variables). First conclusions of the comparison are given in terms of improvement needs and then of perspectives of the work for the following period of work. (authors)

  2. Accident management information needs for a BWR with a MARK I containment

    Energy Technology Data Exchange (ETDEWEB)

    Chien, D.N.; Hanson, D.J. (EG and G Idaho, Inc., Idaho Falls, ID (USA))

    1991-05-01

    In support of the US Nuclear Regulatory Commission Accident Management Research Program, information needs during severe accidents have been evaluated for Boiling Water Reactors (BWRs) with MARK 1 containments. This evaluation was performed using a methodology that identifies plant information needs necessary for personnel to: (a) diagnose that an accident is in progress, (b) select and implement strategies to prevent or mitigate the accident, and (c) monitor the effectiveness of these strategies. The information needs and capabilities identified are intended to form a basis for more comprehensive information needs assessments. The assessments will be performed during the analysis and development of specific strategies, which will be used in accident management prevention and mitigation. 3 refs., 4 figs., 2 tabs.

  3. Accident management information needs for a BWR with a MARK I containment

    International Nuclear Information System (INIS)

    Chien, D.N.; Hanson, D.J.

    1991-05-01

    In support of the US Nuclear Regulatory Commission Accident Management Research Program, information needs during severe accidents have been evaluated for Boiling Water Reactors (BWRs) with MARK 1 containments. This evaluation was performed using a methodology that identifies plant information needs necessary for personnel to: (a) diagnose that an accident is in progress, (b) select and implement strategies to prevent or mitigate the accident, and (c) monitor the effectiveness of these strategies. The information needs and capabilities identified are intended to form a basis for more comprehensive information needs assessments. The assessments will be performed during the analysis and development of specific strategies, which will be used in accident management prevention and mitigation. 3 refs., 4 figs., 2 tabs

  4. An overview of selected severe accident research and applications

    International Nuclear Information System (INIS)

    Hammersley, R.J.; Henry, R.E.

    2004-01-01

    Severe accident research is being conducted world wide by industry organizations, utilities, and regulatory agencies. As this research is disseminated, it is being applied by utilities when they perform their Individual Plant Examinations (IPEs) and consider the preparation of Accident Management programs. The research is associated with phenomenological assessments of containment challenges and associated uncertainties, severe accident codes and analysis tools, systematic evaluation processes, and accident management planning. The continued advancement of this research and its applications will significantly contribute to the enhanced safety and operation of nuclear power plants. (author)

  5. Effects of spent fuel types on offsite consequences of hypothetical accidents

    International Nuclear Information System (INIS)

    Courtney, J. C.; Dwight, C. C.; Lehto, M. A.

    2000-01-01

    Argonne National Laboratory (ANL) conducts experimental work on the development of waste forms suitable for several types of spent fuel at its facility on the Idaho National Engineering and Environmental Laboratory (INEEL) located 48 km West of Idaho Falls, ID. The objective of this paper is to compare the offsite radiological consequences of hypothetical accidents involving the various types of spent nuclear fuel handled in nonreactor nuclear facilities. The highest offsite total effective dose equivalents (TEDEs) are estimated at a receptor located about 5 km SSE of ANL facilities. Criticality safety considerations limit the amount of enriched uranium and plutonium that could be at risk in any given scenario. Heat generated by decay of fission products and actinides does not limit the masses of spent fuel within any given operation because the minimum time elapsed since fissions occurred in any form is at least five years. At cooling times of this magnitude, fewer than ten radionuclides account for 99% of the projected TEDE at offsite receptors for any credible accident. Elimination of all but the most important nuclides allows rapid assessments of offsite doses with little loss of accuracy. Since the ARF (airborne release fraction), RF (respirable fraction), LPF (leak path fraction) and atmospheric dilution factor (χ/Q) can vary by orders of magnitude, it is not productive to consider nuclides that contribute less than a few percent of the total dose. Therefore, only 134 Cs, 137 Cs- 137m Ba, and the actinides significantly influence the offsite radiological consequences of severe accidents. Even using highly conservative assumptions in estimating radiological consequences, they remain well below current Department of Energy guidelines for highly unlikely accidents

  6. SESAME: a software tool for the numerical dosimetric reconstruction of radiological accidents involving external sources and its application to the accident in Chile in December 2005.

    Science.gov (United States)

    Huet, C; Lemosquet, A; Clairand, I; Rioual, J B; Franck, D; de Carlan, L; Aubineau-Lanièce, I; Bottollier-Depois, J F

    2009-01-01

    Estimating the dose distribution in a victim's body is a relevant indicator in assessing biological damage from exposure in the event of a radiological accident caused by an external source. This dose distribution can be assessed by physical dosimetric reconstruction methods. Physical dosimetric reconstruction can be achieved using experimental or numerical techniques. This article presents the laboratory-developed SESAME--Simulation of External Source Accident with MEdical images--tool specific to dosimetric reconstruction of radiological accidents through numerical simulations which combine voxel geometry and the radiation-material interaction MCNP(X) Monte Carlo computer code. The experimental validation of the tool using a photon field and its application to a radiological accident in Chile in December 2005 are also described.

  7. The development of severe accident analysis technology

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Heuy Dong; Cho, Sung Won; Kim, Sang Baek; Park, Jong Hwa; Lee, Kyu Jung; Park, Lae Joon; Hu, Hoh; Hong, Sung Wan [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1993-07-01

    The objective of the development of severe accident analysis technology is to understand the severe accident phenomena such as core melt progression and to provide a reliable analytical tool to assess severe accidents in a nuclear power plant. Furthermore, establishment of the accident management strategies for the prevention/mitigation of severe accidents is also the purpose of this research. The study may be categorized into three areas. For the first area, two specific issues were reviewed to identify the further research direction, that is the natural circulation in the reactor coolant system and the fuel-coolant interaction as an in-vessel and an ex-vessel phenomenological study. For the second area, the MELCOR and the CONTAIN codes have been upgraded, and a validation calculation of the MELCOR has been performed for the PHEBUS-B9+ experiment. Finally, the experimental program has been established for the in-vessel and the ex-vessel severe accident phenomena with the in-pile test loop in KMRR and the integral containment test facilities, respectively. (Author).

  8. Severe Accidents: French Regulatory Practice for Nuclear Power Plants

    International Nuclear Information System (INIS)

    Colin, M.

    1997-01-01

    In the framework of a continuous and iterative process, the French Safety Authority asks the utility EDF to implement equipment and procedure modifications on the operating reactors, in order to cope with the most likely Severe Accident sequences. As a result of Probabilistic Safety Assessments published in 1990, important equipment and procedure modifications are being implemented on the French PWRs to improve the safety in shutdown states. The implementation of another set of modifications against some reactivity accident sequences is also in progress. More recently, the Safety Authority expressed specific Severe Accident requirements in terms of instrumentation, equipment qualification, high pressure core melt accidents and hydrogen risk prevention. In that respect, EDF was asked to implement hydrogen recombiners on its reactors. On the other hand, the French Safety authority is involved with its German counterpart in the assessment process of the European Pressurized Water Reactor Project. In consistency with the common recommendations of the Safety Authorities involved, Severe Accident provisions for this reactor are being taken into account at the design stage

  9. The radiological accident in Yanango

    International Nuclear Information System (INIS)

    2000-01-01

    The use of nuclear technologies has fostered new, more effective and efficient medical procedures and has substantially improved diagnostic and therapeutic capabilities. However, in order that the benefits of the use of ionizing radiation outweigh the potential hazards posed by this medium, it is important that radiation protection and safety standards be established to govern every aspect of the application of ionizing radiation. Adherence to these standards needs to be maintained through effective regulatory control, safe operational procedures and a safety culture that is shared by all. Occasionally, established safety procedures are violated and serious radiological consequences ensue. The radiological accident described in this report, which took place in Lilo, Georgia, was a result of such an infraction. Sealed radiation sources had been abandoned by a previous owner at a site without following established regulatory safety procedures, for example by transferring the sources to the new owner or treating them as spent material and conditioning them as waste. As a consequence, 11 individuals at the site were exposed for a long period of time to high doses of radiation which resulted inter alia in severe radiation induced skin injuries. Although at the time of the accident Georgia was not an IAEA Member State and was not a signatory of the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency, the IAEA still provided assistance to the Government of Georgia in assessing the radiological situation, while the World Health Organization (WHO) assisted in alleviating the medical consequences of the accident. The two organizations co-operated closely from the beginning, following the request for assistance by the Georgian Government. The IAEA conducted the radiological assessment and was responsible for preparing the report. The WHO and its collaborating centres within the Radiation Emergency Medical Preparedness and Assistance Network

  10. Development of Accident Scenario for Interim Spent Fuel Storage Facility Based on Fukushima Accident

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dongjin; Choi, Kwangsoon; Yoon, Hyungjoon; Park, Jungsu [KEPCO-E and C, Yongin (Korea, Republic of)

    2014-05-15

    700 MTU of spent nuclear fuel is discharged from nuclear fleet every year and spent fuel storage is currently 70.9% full. The on-site wet type spent fuel storage pool of each NPP(nuclear power plants) in Korea will shortly exceed its storage limit. Backdrop, the Korean government has rolled out a plan to construct an interim spent fuel storage facility by 2024. However, the type of interim spent fuel storage facility has not been decided yet in detail. The Fukushima accident has resulted in more stringent requirements for nuclear facilities in case of beyond design basis accidents. Therefore, there has been growing demand for developing scenario on interim storage facility to prepare for beyond design basis accidents and conducting dose assessment based on the scenario to verify the safety of each type of storage.

  11. A web-based rapid assessment tool for production publishing solutions

    Science.gov (United States)

    Sun, Tong

    2010-02-01

    Solution assessment is a critical first-step in understanding and measuring the business process efficiency enabled by an integrated solution package. However, assessing the effectiveness of any solution is usually a very expensive and timeconsuming task which involves lots of domain knowledge, collecting and understanding the specific customer operational context, defining validation scenarios and estimating the expected performance and operational cost. This paper presents an intelligent web-based tool that can rapidly assess any given solution package for production publishing workflows via a simulation engine and create a report for various estimated performance metrics (e.g. throughput, turnaround time, resource utilization) and operational cost. By integrating the digital publishing workflow ontology and an activity based costing model with a Petri-net based workflow simulation engine, this web-based tool allows users to quickly evaluate any potential digital publishing solutions side-by-side within their desired operational contexts, and provides a low-cost and rapid assessment for organizations before committing any purchase. This tool also benefits the solution providers to shorten the sales cycles, establishing a trustworthy customer relationship and supplement the professional assessment services with a proven quantitative simulation and estimation technology.

  12. A neutron dosemeter for nuclear criticality accidents.

    Science.gov (United States)

    d'Errico, F; Curzio, G; Ciolini, R; Del Gratta, A; Nath, R

    2004-01-01

    A neutron dosemeter which offers instant read-out has been developed for nuclear criticality accidents. The system is based on gels containing emulsions of superheated dichlorodifluoromethane droplets, which vaporise into bubbles upon neutron irradiation. The expansion of these bubbles displaces an equivalent volume of gel into a graduated pipette, providing an immediate measure of the dose. Instant read-out is achieved using an array of transmissive optical sensors which consist of coupled LED emitters and phototransistor receivers. When the gel displaced in the pipette crosses the sensing region of the photomicrosensors, it generates a signal collected on a computer through a dedicated acquisition board. The performance of the device was tested during the 2002 International Accident Dosimetry Intercomparison in Valduc, France. The dosemeter was able to follow the initial dose gradient of a simulated accident, providing accurate values of neutron kerma; however, the emulsion was rapidly depleted of all its drops. A model of the depletion effects was developed and it indicates that an adequate dynamic range of the dose response can be achieved by using emulsions of smaller droplets.

  13. A neutron dosemeter for nuclear criticality accidents

    International Nuclear Information System (INIS)

    D'Errico, F.; Curzio, G.; Ciolini, R.; Del Gratta, A.; Nath, R.

    2004-01-01

    A neutron dosemeter which offers instant read-out has been developed for nuclear criticality accidents. The system is based on gels containing emulsions of superheated dichlorodifluoromethane droplets, which vaporise into bubbles upon neutron irradiation. The expansion of these bubbles displaces an equivalent volume of gel into a graduated pipette, providing an immediate measure of the dose. Instant read-out is achieved using an array of transmissive optical sensors which consist of coupled LED emitters and phototransistor receivers. When the gel displaced in the pipette crosses the sensing region of the photo microsensors, it generates a signal collected on a computer through a dedicated acquisition board. The performance of the device was tested during the 2002 International Accident Dosimetry Intercomparison in Valduc (France)). The dosemeter was able to follow the initial dose gradient of a simulated accident, providing accurate values of neutron kerma; however, the emulsion was rapidly depleted of all its drops. A model of the depletion effects was developed and it indicates that an adequate dynamic range of the dose response can be achieved by using emulsions of smaller droplets. (authors)

  14. CRED Rapid Ecological Assessment Line Point Intercept Survey of Benthic Parameter Assessments at Guguan, Marianas in 2011

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Line point intercept (LPI) surveys and benthic composition assessments were conducted during Rapid Ecological Assessments (REA) as part of the Pacific Reef...

  15. CRED Rapid Ecological Assessment Line Point Intercept Survey of Benthic Parameter Assessments at Aguijan, Marianas in 2011

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Line point intercept (LPI) surveys and benthic composition assessments were conducted during Rapid Ecological Assessments (REA) as part of the Pacific Reef...

  16. CRED Rapid Ecological Assessment Line Point Intercept Survey of Benthic Parameter Assessments at Saipan, Marianas in 2011

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Line point intercept (LPI) surveys and benthic composition assessments were conducted during Rapid Ecological Assessments (REA) as part of the Pacific Reef...

  17. CRED Rapid Ecological Assessment Line Point Intercept Survey of Benthic Parameter Assessments at Guam, Marianas in 2011

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Line point intercept (LPI) surveys and benthic composition assessments were conducted during Rapid Ecological Assessments (REA) as part of the Pacific Reef...

  18. Unavoidable Accident

    OpenAIRE

    Grady, Mark F.

    2009-01-01

    In negligence law, "unavoidable accident" is the risk that remains when an actor has used due care. The counterpart of unavoidable accident is "negligent harm." Negligence law makes parties immune for unavoidable accident even when they have used less than due care. Courts have developed a number of methods by which they "sort" accidents to unavoidable accident or to negligent harm, holding parties liable only for the latter. These sorting techniques are interesting in their own right and als...

  19. Southern Great Plains Rapid Ecoregional Assessment: pre-assessment report

    Science.gov (United States)

    Assal, Timothy J.; Melcher, Cynthia P.; Carr, Natasha B.

    2015-01-01

    The purpose of the Pre-Assessment Report for the Southern Great Plains Rapid Ecoregional Assessment (REA) is to document the selection process for and final list of Conservation Elements, Change Agents, and Management Questions developed during Phase I. The overall goal of the REAs being conducted for the Bureau of Land Management (BLM) is to provide information that supports regional planning and analysis for the management of ecological resources. The REA provides an assessment of baseline ecological conditions, an evaluation of current risks from drivers of ecosystem change, and a predictive capacity for evaluating future risks. The REA also may be used for identifying priority areas for conservation or restoration and for assessing the cumulative effects of a variety of land uses. There are several components of the REAs. Management Questions, developed by the BLM and partners for the ecoregion, identify the information needed for addressing land-management responsibilities. Conservation Elements represent regionally significant terrestrial and aquatic species and communities that are to be conserved and (or) restored. For each Conservation Element, key ecological attributes will be evaluated to determine the status of each species and community. The REA also will evaluate major drivers of ecosystem change, or Change Agents, currently affecting or likely to affect the status of Conservation Elements in the future. The relationships between Change Agents and key ecological attributes will be summarized using conceptual models. The REA process is a two-phase process. Phase I (pre-assessment) includes developing and finalizing the lists of priority Management Questions, Conservation Elements, and Change Agents, culminating in the REA Pre-Assessment Report.

  20. The need to study of bounding accident in reprocessing plant

    International Nuclear Information System (INIS)

    Segawa, Satoshi; Fujita, Kunio

    2013-01-01

    There is a clear consensus that the severe accident corresponds to the core damage accident for power reactors. On the other hand, for FCFs, there is no clear consensus on what is the accident to assess the safety in the region of beyond design basis, or what is the accident which has very low probability but large consequence. The need to examine a bounding consequence of each type of accident is explained to advance the rationality of safety management and regulation and, as a result, to reinforce the safety of a reprocessing plant. The likelihood of occurrence of an accident causing a bounding consequence should correspond to that of a severe accident at a nuclear power plant. The bounding consequence will be derived using the deterministic method and sound engineering judgment supplemented by the probabilistic method. Once an agreement on such a concept is reached among regulators, operators and related experts it will help to provide a solid basis to ensure the safety of a reprocessing plant independent of that of a nuclear power plant. In this paper, we show a preliminary risk profile of RRP calculated by QSA (Quantitative Safety Assessment) which JNFL developed. The profile shows that bounding consequences of various accidents in a range of occurrence frequency corresponding to a severe accident at a nuclear power plant. And we find that the bounding consequence of high-level liquid waste boiling is the largest among all in this range. Therefore, the risk of this event is shown in this paper as an example. To build a common consensus about bounding accidents among concerned parties will encourage regulatory body to introduce such an idea for more effective regulation with scientific rationality. Additionally the study of bounding accidents can contribute to substantial development for accident management strategy as reprocessing operators. (authors)

  1. Optimum modellings of atmospheric diffusion of radioactive effluents and exposure doses in the accident consequence assessment (Level 3 PSA)

    International Nuclear Information System (INIS)

    Kim, Byung Woo; Lee, Young Bok; Han, Moon Hee; Kim, Eun Han; Suh, Kyung Suk; Hwang, Won Tae

    1992-12-01

    Atmospheric diffusion and exposure strongly dependent on the environment were firstly considered in the full spectrum of accident consequence assessment to establish based on Korean conditions. An optimum weather category based on Korean climate and site-specific meteorology of Kori region was established by statistical analysis of measured data for 10 years. And a trajectory model was selected as the optimal one in the ACA by reviewing several existing diffusion models. Following aspects were considered in this selection as availability of meteorological data, ability to treat the change to wind direction, easy applicability of the model, and restriction of CPU time and core memory in current computers. Numerical integration method of our own was selected as the optimal dose assessment tool of external exposure. Unit dose rate was firstly computed with this method as the function of energy level of radionuclide, size of lattice, and distance between source and receptor, and then the results were rearranged as the data library for the rapid access to the ACA run. Dynamic ecosystem modelling has been done in order to estimate the seasonal variation of radioactivity for the assessment of ingestion exposure, considering Korean ingestion behavior, agricultural practice and the transportation. There is a lot of uncertainty in a countermeasure model due to the assumed values of parameters such as fraction of population with different shielding factor and driving speed. A new countermeasure model was developed using the concept of fuzzy set theory, since it provided the mathematical tools which could characterize the uncertainty involved in countermeasure modelling. (Author)

  2. Domino effect in chemical accidents: main features and accident sequences

    OpenAIRE

    Casal Fàbrega, Joaquim; Darbra Roman, Rosa Maria

    2010-01-01

    The main features of domino accidents in process/storage plants and in the transportation of hazardous materials were studied through an analysis of 225 accidents involving this effect. Data on these accidents, which occurred after 1961, were taken from several sources. Aspects analyzed included the accident scenario, the type of accident, the materials involved, the causes and consequences and the most common accident sequences. The analysis showed that the most frequent causes a...

  3. NPP Krsko Severe Accident Management Guidelines Upgrade

    International Nuclear Information System (INIS)

    Mihalina, Mario; Spalj, Srdjan; Glaser, Bruno; Jalovec, Robi; Jankovic, Gordan

    2014-01-01

    Nuclear Power Plant Krsko (NEK) has decided to take steps for upgrade of safety measures to prevent severe accidents, and to improve the means to successfully mitigate their consequences. The content of the program for the NEK Safety Upgrade is consistent with the nuclear industry response to Fukushima accident, which revealed many new insights into severe accidents. Therefore, new strategies and usage of new systems and components should be integrated into current NEK Severe Accident Management Guidelines (SAMG's). SAMG's are developed to arrest the progression of a core damage accident and to limit the extent of resulting releases of fission products. NEK new SAMG's revision major changes are made due to: replacement of Electrical Recombiners by Passive Autocatalytic Recombiners (PARs) and the installation of Passive Containment Filtered Vent System (PCFV); to handle a fuel damage situation in Spent Fuel Pool (SFP) and to assess risk of core damage situation during shutdown operation. (authors)

  4. Identification of the operating crew's information needs for accident management

    International Nuclear Information System (INIS)

    Nelson, W.R.; Hanson, D.J.; Ward, L.W.; Solberg, D.E.

    1988-01-01

    While it would be very difficult to predetermine all of the actions required to mitigate the consequences of every potential severe accident for a nuclear power plant, development of additional guidance and training could improve the likelihood that the operating crew would implement effective sever-accident management measures. The US Nuclear Regulatory Commission (NRC) is conducting an Accident Management Research Program that emphasizes the application of severe-accident research results to enhance the capability of the plant operating crew to effectively manage severe accidents. One element of this program includes identification of the information needed by the operating crew in severe-accident situations. This paper discusses a method developed for identifying these information needs and its application. The methodology has been applied to a generic reactor design representing a PWR with a large dry containment. The information needs were identified by systematically determining what information is needed to assess the health of the critical functions, identify the presence of challenges, select strategies, and assess the effectiveness of these strategies. This method allows the systematic identification of information needs for a broad range of severe-accident scenarios and can be validated by exercising the functional models for any specific event sequence

  5. A study on the estimation of economic consequence of severe accident

    International Nuclear Information System (INIS)

    Hong, Dae Seok; Lee, Kun Jai; Jeong, Jong Tae

    1996-01-01

    A model to estimate economic consequence of severe accident provides some measure of the impact on the accident and enables to know the different effects of the accident described as same terms of cost and combined as necessary. Techniques to assess the consequences of accidents in terms of cost have many applications, for instance in examining countermeasure options, as part of either emergency planning or decision making after an accident. In this study, a model to estimate the accident economic consequence is developed appropriate to our country focused on PWR accident costs from a societal viewpoint. Societal costs are estimated by accounting for losses that directly affect the plant licensee, the public, the nuclear industry, or the electric utility industry after PWR accident

  6. Instrumentation availability during severe accidents for a boiling water reactor with a Mark I containment

    International Nuclear Information System (INIS)

    Arcieri, W.C.; Hanson, D.J.

    1992-02-01

    In support of the US Nuclear Regulatory Commission Accident Management Research Program, the availability of instruments to supply accident management information during a broad range of severe accidents is evaluated for a Boiling Water Reactor with a Mark I containment. Results from this evaluation include: (1) the identification of plant conditions that would impact instrument performance and information needs during severe accidents; (2) the definition of envelopes of parameters that would be important in assessing the performance of plant instrumentation for a broad range of severe accident sequences; and (3) assessment of the availability of plant instrumentation during severe accidents

  7. Perspectives on phenomenology and simulation of severe accident in light water reactors

    International Nuclear Information System (INIS)

    Sugimoto, Jun

    2014-01-01

    Severe accident phenomena in light water reactors (LWRs) are generally characterized by their physically and chemically complex processes involved with high temperature core melt, multi-component and multi-phase flows, transport of radioactive materials and sometimes highly non-equilibrium state. Severe accident phenomenology is usually categorized into four phases; (1) fuel degradation, (2) in-vessel phenomena, (3) ex-vessel phenomena and (4) fission product release and transport. Among these, ex-vessel phenomena consist of five subcategories; 1) direct containment heating, 2) fuel coolant interaction (steam explosion), 3) molten core concrete interaction, 4) hydrogen behaviour and control and 5) containment failure/leakage. In the field of simulation of severe accident, severe accident analytical codes have been developed in the United States, EU and Japan, such as MAAP, MELCOR, ASTEC, THALES and SAMPSON. Many different kinds of analytical codes for the specific severe accident phenomena have also been developed worldwide. After the accident at Fukushima Daiichi Nuclear Power Station, review of severe accident research issues has been conducted and several issues are reconsidered, such as effects of BWR core degradation behaviors, sea water injection, pool scrubbing under rapid depressurization, containment failure/leakage and re-criticality. Some new experimental and analytical efforts have been started after the Fukushima accident. The present paper describes the perspectives on phenomenology and simulation of severe accident in LWRs, with the emphasis of insights obtained in the review of Fukushima accident. (author)

  8. Stress in accident and post-accident management at Chernobyl

    International Nuclear Information System (INIS)

    Girard, P.; Dubreuil, G.H.

    1996-01-01

    The effects of the Chernobyl nuclear accident on the psychology of the affected population have been much discussed. The psychological dimension has been advanced as a factor explaining the emergence, from 1990 onwards, of a post-accident crisis in the main CIS countries affected. This article presents the conclusions of a series of European studies, which focused on the consequences of the Chernobyl accident. These studies show that the psychological and social effects associated with the post-accident situation arise from the interdependency of a number of complex factors exerting a deleterious effect on the population. We shall first attempt to characterise the stress phenomena observed among the population affected by the accident. Secondly, we will be presenting an anlysis of the various factors that have contributed to the emerging psychological and social features of population reaction to the accident and in post-accident phases, while not neglecting the effects of the pre-accident situation on the target population. Thirdly, we shall devote some initial consideration to the conditions that might be conducive to better management of post-accident stress. In conclusion, we shall emphasise the need to restore confidence among the population generally. (Author)

  9. Rapid assessment of assignments using plagiarism detection software.

    Science.gov (United States)

    Bischoff, Whitney R; Abrego, Patricia C

    2011-01-01

    Faculty members most often use plagiarism detection software to detect portions of students' written work that have been copied and/or not attributed to their authors. The rise in plagiarism has led to a parallel rise in software products designed to detect plagiarism. Some of these products are configurable for rapid assessment and teaching, as well as for plagiarism detection.

  10. Design features of ACR in severe accident mitigation

    International Nuclear Information System (INIS)

    Shapiro, H.; Krishnan, V.S.; Santamaura, P.; Lekakh, B.; Blahnik, C.

    2007-01-01

    New reactor designs require the evaluation of design alternatives to reduce the radiological risk by preventing severe accidents or by limiting releases from the plant in the event of such accidents. The Advanced CANDU Reactor TM (ACR TM ) design has provisions to prevent and mitigate severe accidents. This paper describes key ACR design features for severe accident mitigation. It provides a high-level overview of the findings to date. Several design provisions have not yet been finalized or decided, but the designers are keenly aware of the SAM concepts and their requirements. The active heat sinks for 'vessels' (i.e., the fuel channels, the calandria vessel, the calandria end-shields and the calandria vault) are all amply capable of dissipating the severe accident heat loads. These heat sinks are designed to be operable under severe accident environmental conditions; however, their operability is yet to be confirmed by assessments. The active heat sinks for the various process vessels are 'backed up' by passive heat sinks (i.e., steaming plus water make-up from the RWS). The supply side of passive heat sinks is simple, rugged, and not vulnerable to failures of plant systems. The importance of the steam relief side is recognized, and the adequate relief capacity will be provided. The passive heat sinks will give the SAM more than 1 day (likely several days) to diagnose the accident and to establish the ultimate heat sinks. The spray system for containment pressure suppression is designed for high reliability and has ample capacity to ensure low containment leakage without external intervention, after which time alternative supply to the sprays can be brought on line manually. The sprays are backed up by the LACs which are assessed for operability following a severe accident. The strong ACR containment will provide a long time of completely passive protection for any severe accident at decay power. Its characteristics are not prone to catastrophic failures. The

  11. Accidents, disasters and crisis: contribution of epidemiology in the nuclear field

    International Nuclear Information System (INIS)

    Verger, P.; Bard, D.; Hubert, P.

    1995-01-01

    The experience of the Chernobyl accident has shown the necessity of being prepared for epidemiological assessment of the health consequences of a nuclear or a radiological accident. We discuss the contribution of epidemiology in such situations, in addition to the existing tools designed to assess or manage radiological risks. From a decisional point of view, three issues are distinguished: the protection of the different population groups against ionizing radiations, the achievement of health care and the communication with the public and media. We discuss the input of epidemiological tools in both perspectives. Epidemiology may also contribute to the analysis of health events that may be observed after an accident, i.e. to assess whether these events are not statistical artifacts, whether they are an effect of the exposure to ionizing radiations or a non specific consequence of any accident. Finally, epidemiological studies should be carried out to improve our knowledge on ionizing radiations effects with a special consideration given to the dose-effect relationships. Examples of past nuclear accidents are used to discuss these issues. The last part of this paper is focused on different research issues that should be developed for preparing epidemiological plans for nuclear accidents. (Author). 48 refs., 1 fig., 3 tabs

  12. Chernobyl accident. Exposures and effects

    International Nuclear Information System (INIS)

    Bennett, B.; Bouville, A.; Hall, P.; Savkin, M.; Storm, H.

    2000-01-01

    The Chernobyl accident that occurred in Ukraine in April 1986 happened during an experimental test of the electrical control system as the reactor was being shut down for routine maintenance. The operators, in violation of safety regulations, had switched off important control systems and allowed the reactor to reach unstable, low-power conditions. A sudden power surge caused a steam explosion that ruptured the reactor vessel and allowed further violent fuel-steam interactions that destroyed the reactor and the reactor building. The Chernobyl accident was the most serious to have ever occurred in the nuclear power industry. The accident caused the early death of 30 power plant employees and fire fighters and resulted in widespread radioactive contamination in areas of Belarus, the Russian Federation, and Ukraine inhabited by several million people. Radionuclides released from the reactor that caused exposure of individuals were mainly iodine-131, caesium-134 and caesium-137. Iodine-131 has a short radioactive half-life (8 days), but it can be transferred relatively rapidly through milk and leafy vegetables to humans. Iodine becomes localized in the thyroid gland. For reasons of intake of these foods, size of thyroid gland and metabolism, the thyroid doses are usually greater to infants and children than to adults. The isotopes of caesium have relatively long half-lives (caesium-134: 2 years; caesium-137: 30 years). These radionuclides cause long-term exposures through the ingestion pathway and from external exposure to these radionuclides deposited on the ground. In addition to radiation exposure, the accident caused long-term changes in the lives of people living in the contaminated regions, since measures intended to limit radiation doses included resettlements, changes in food supplies, and restrictions in activities of individuals and families. These changes were accompanied by major economic, social and political changes in the affected countries resulting

  13. Should evacuation conditions after a nuclear accident be revised?; Faut-il revoir les conditions d'evacuation a la suite d'un accident nucleaire?

    Energy Technology Data Exchange (ETDEWEB)

    Nifenecker, H.

    2011-07-01

    The author proposes to draw lessons from the Fukushima accident, notably in the field of post-accident management. He discusses the definition of an as widely understandable as possible method of description of risks related to irradiations after a nuclear accident. As these irradiations are mainly low dose ones which have a carcinogenic effect, he proposes to assess the average life expectancy loss due to an irradiation. Then, this risk can be easily compared with other risks like air pollution, smoking and passive smoking, and so on. Then, once this risk assessment method is well defined, it is possible to associate the inhabitants of contaminated areas to the post-accident management. They could then decide to go back to their homes or not with full knowledge of the facts

  14. Comorbidity and radiation: methodological aspects of health assessment of persons exposed to the Chornobyl accident factors.

    Science.gov (United States)

    Nosach, O V

    2013-01-01

    Comorbidity is one of the most challenging problems of a modern medicine. In a population exposed to the factors of the Chornobyl accident there is an obvious increase in the number of diseases occurring simultaneously against the background of rising prevalence of different classes of chronic medical nosology. The scientific data analysis are presented on the methodological approaches that can be used to create a specialized system for integrated assessment of the health of patients with comorbid disorders. Developing such a system it should be taken into account the trends of changes in the incidence, prevalence and structure of chronic disease, factors and regularities of comorbid disease in the cohorts of Chornobyl accident clean-up workers, evacuees and dwellers of contaminated territories. The system should provide a non-random selection of combinations (clusters) of the most common diseases with serious consequences for the survivors. Nosach O. V., 2013.

  15. Assessment of the most significant causes of transportation and machinery accidents on collieries

    CSIR Research Space (South Africa)

    Oberholzer, JW

    1995-08-01

    Full Text Available The purpose of this study is to identify those areas, classified according to the SAMRASS data base system under the codes relating to underground transport and machinery type accidents that give cause to the greatest amount of accidents...

  16. Assessment and prediction of road accident injuries trend using time-series models in Kurdistan.

    Science.gov (United States)

    Parvareh, Maryam; Karimi, Asrin; Rezaei, Satar; Woldemichael, Abraha; Nili, Sairan; Nouri, Bijan; Nasab, Nader Esmail

    2018-01-01

    Road traffic accidents are commonly encountered incidents that can cause high-intensity injuries to the victims and have direct impacts on the members of the society. Iran has one of the highest incident rates of road traffic accidents. The objective of this study was to model the patterns of road traffic accidents leading to injury in Kurdistan province, Iran. A time-series analysis was conducted to characterize and predict the frequency of road traffic accidents that lead to injury in Kurdistan province. The injuries were categorized into three separate groups which were related to the car occupants, motorcyclists and pedestrian road traffic accident injuries. The Box-Jenkins time-series analysis was used to model the injury observations applying autoregressive integrated moving average (ARIMA) and seasonal autoregressive integrated moving average (SARIMA) from March 2009 to February 2015 and to predict the accidents up to 24 months later (February 2017). The analysis was carried out using R-3.4.2 statistical software package. A total of 5199 pedestrians, 9015 motorcyclists, and 28,906 car occupants' accidents were observed. The mean (SD) number of car occupant, motorcyclist and pedestrian accident injuries observed were 401.01 (SD 32.78), 123.70 (SD 30.18) and 71.19 (SD 17.92) per year, respectively. The best models for the pattern of car occupant, motorcyclist, and pedestrian injuries were the ARIMA (1, 0, 0), SARIMA (1, 0, 2) (1, 0, 0) 12 , and SARIMA (1, 1, 1) (0, 0, 1) 12 , respectively. The motorcyclist and pedestrian injuries showed a seasonal pattern and the peak was during summer (August). The minimum frequency for the motorcyclist and pedestrian injuries were observed during the late autumn and early winter (December and January). Our findings revealed that the observed motorcyclist and pedestrian injuries had a seasonal pattern that was explained by air temperature changes overtime. These findings call the need for close monitoring of the

  17. State of the art for assessing the off-side economic consequences of nuclear accidents

    International Nuclear Information System (INIS)

    Gallego Diaz, E.

    1996-01-01

    The paper is intended to offer a wide perspective on th methodologies for assessing the off-side economic consequences of nuclear accidents. The element which can contribute to the cost are first reviewed, namely the application of countermeasures against radioactive contamination: population movements, decontamination, food bans; together with the resulting health effects if this is the case. The basic characteristics of the existing models and codes are also presented, including the most recent developments and intercomparisons of results. Some applications of this kind of studies in different fields are outlined. (Author) 17 refs

  18. Probabilistic studies of accident sequences

    International Nuclear Information System (INIS)

    Villemeur, A.; Berger, J.P.

    1986-01-01

    For several years, Electricite de France has carried out probabilistic assessment of accident sequences for nuclear power plants. In the framework of this program many methods were developed. As the interest in these studies was increasing and as adapted methods were developed, Electricite de France has undertaken a probabilistic safety assessment of a nuclear power plant [fr

  19. Safety apparatus for serious radioactive accidents (1962)

    International Nuclear Information System (INIS)

    Estournel, R.; Rodier, J.

    1962-01-01

    In the case of a serious radioactive accident, radioactive dust and gases may be released into the atmosphere. It is therefore necessary to be able to evaluate rapidly the importance of the risk to the surrounding population, and to be able to ensure, even in the event of an evacuation of the Centre, the continuation of the radioactivity analyses and the decontamination of the personnel. For this, the Anti-radiation Protection Service at Marcoule has organised mobile detection teams and designed a mobile laboratory and a mobile shower-unit. After describing the duty of the mobile teams, the report gives a description of the apparatus which would be used at the Marcoule Centre in the case of a serious radioactive accident. The method of using this apparatus is given. (authors) [fr

  20. ADAM: An Accident Diagnostic,Analysis and Management System - Applications to Severe Accident Simulation and Management

    International Nuclear Information System (INIS)

    Zavisca, M.J.; Khatib-Rahbar, M.; Esmaili, H.; Schulz, R.

    2002-01-01

    The Accident Diagnostic, Analysis and Management (ADAM) computer code has been developed as a tool for on-line applications to accident diagnostics, simulation, management and training. ADAM's severe accident simulation capabilities incorporate a balance of mechanistic, phenomenologically based models with simple parametric approaches for elements including (but not limited to) thermal hydraulics; heat transfer; fuel heatup, meltdown, and relocation; fission product release and transport; combustible gas generation and combustion; and core-concrete interaction. The overall model is defined by a relatively coarse spatial nodalization of the reactor coolant and containment systems and is advanced explicitly in time. The result is to enable much faster than real time (i.e., 100 to 1000 times faster than real time on a personal computer) applications to on-line investigations and/or accident management training. Other features of the simulation module include provision for activation of water injection, including the Engineered Safety Features, as well as other mechanisms for the assessment of accident management and recovery strategies and the evaluation of PSA success criteria. The accident diagnostics module of ADAM uses on-line access to selected plant parameters (as measured by plant sensors) to compute the thermodynamic state of the plant, and to predict various margins to safety (e.g., times to pressure vessel saturation and steam generator dryout). Rule-based logic is employed to classify the measured data as belonging to one of a number of likely scenarios based on symptoms, and a number of 'alarms' are generated to signal the state of the reactor and containment. This paper will address the features and limitations of ADAM with particular focus on accident simulation and management. (authors)