WorldWideScience

Sample records for rangifer tarandus electronic

  1. Digital Necrobacillosis in Norwegian Wild Tundra Reindeer (Rangifer tarandus tarandus)

    DEFF Research Database (Denmark)

    Handeland, K.; Boye, Mette; Bergsjø, B.

    2010-01-01

    Outbreaks of digital necrobacillosis in Norwegian wild tundra reindeer (Rangifer tarandus tarandus) are described. The outbreaks occurred in late summer and autumn 2007 and 2008, subsequent to periods with an unusually high number of days with precipitation and high air temperature. Lesions were....... necrophorum was cultured from the foot lesions of six animals. Five of these isolates were examined by 16S rRNA sequencing. The sequences were identical and differed from all other strains listed in GenBank. These results are consistent with circulation of a reindeer-adapted pathogenic strain of F....... necrophorum in the wild reindeer population, causing outbreaks of digital necrobacillosis following warm and humid summers....

  2. Salivary glands in Svalbard reindeer (Rangifer tarandus platyrhynchus and in Norwegian reindeer (Rangifer tarandus tarandus

    Directory of Open Access Journals (Sweden)

    Svein D. Mathiesen

    1999-04-01

    Full Text Available The aim of this investigation was to compare the size of salivaty glands in Svalbard reindeer {Rangifer tarandus platyrhynchus and in Norwegian reindeer (Rangifer t. tarandus in relation to feeding strategy, season and reproductive status. The mean body mass (BM, standard deviation j in adult non-lactating female Svalbard reindeer was 72.0, s = 4.2, kg (n = 8 in September and 46.7, s = 7.1, kg (« = 4 in April. The mean BM of adult non-lactating Norwegian reindeer was 67.5, s = 7.7, kg (» = 8 in September and 59.2, s = 9.6, kg (n = 9 in March. In non-lactating female Svalbard reindeer the mean combined mass of parotid glands was 82.7, s = 4.5, g in September and 58.8, s = 8.7, g in April (P < 0.05. In the Norwegian reindeer the mean combined mass of the parotid glands was 95.2, s = 14.4, g in Septembet and 68.1, s = 9.5, g in Match (P < 0.05. We wete not able to find any sub-species differences in the size of the salivaty glands which could be related to phenotypic difference in feeding strategy. Both sub-species had parotid glands sizes similar to that of intermediate ruminant types, ranging from 0.11-0.14% of BM. The larger absolute size of salivaty glands in summer compared to winter reflects the importance of high rates of production of saliva when the dry matter intake and microbial fermentation is high.

  3. Wild reindeer Rangifer tarandus (L. in Chukotka

    Directory of Open Access Journals (Sweden)

    Felix B. Chernyavskii

    1998-03-01

    Full Text Available We reviewed historical records of the abundance and distribution of wild reindeer {Rangifer tarandus L. in Chukotka and studied reindeer numbers, distribution and behavior from 1983 to 1993. There were large numbers of wild reindeer in Chukotka until the end of the eighteenth century, but during the nineteenth century the population declined probably from intensive harvest after the introduction of firearms by the Cossacks. During the nineteenth century herding of domestic reindeer also increased, and reindeer herders continued to hunt wild reindeer intensively. During the 1950s there were only about 8500 wild reindeer in two separate herds in Chukotka. By the late 1970s the wild reindeer population had increased to about 11 000. Ten years later we estimated 16 534 reindeer, and found only one contiguous population. Presently, the population calves and spends the summer in the Anadyr Uplands and migrates west and southwest to spend the winter in forest tundra and northern taiga regions. Predators, primarily wolves and brown bears, kill a significant number of calves. Today, the wild reindeer in Chukotka coexist with 300 000 domestic reindeer. However, current costs of gasoline and helicopters make it prohibitive to herd reindeer in much of central Chukotka, so that wild reindeer have room for expansion. Poaching is a major conservation problem. Poachers shoot wild reindeer from helicopters to obtain velvet antlers. Leaders of domestic reindeer cooperatives encourage poaching by telling people that wild reindeer are in fact just stray domestic reindeer and there is no enforcement of game laws.

  4. Pestivirus infection in reindeer (Rangifer tarandus

    Directory of Open Access Journals (Sweden)

    Magdalena eLarska

    2015-10-01

    Full Text Available Reindeer species (Rangifer tarandus, Linneus 1758 includes wild and semi-domesticated ruminants belonging to Capreaolinae subfamily of Cervidae family reared in Eurasia (reindeer subspecies and North America (caribou subspecies. Herding of reindeer has a great historical, socio-economic and ecological importance, especially to indigenous ethnic minorities. Infectious disease threats may therefore impact not solely the animal population driving it to further extinction and irreversible alterations to the wild environments of northern hemisphere, but also add to cultural changes observed as negative impact of globalization. Introduction of new technologies to control of reindeer migration between dwindling pasture areas and intensification of reindeer husbandry may facilitate the intra- and interspecies transmission of pathogens. The role of the reindeer as a potential BVDV reservoir has been studied, however the number of publications is rather limited. The observed seroprevalences of the virus varied significantly between different geographical regions with different epidemiological situation. Most frequently limited number of animals studied and the differences in the sensitivities and specificities of the diagnostic test used could have also influenced on the differences between the studies. No pestivirus has been ever detected in free-ranging reindeer, however a putative pestivirus strain named V60-Krefeld has been isolated from reindeer kept at a German Zoo in the 1990’s. The virus was characterized as border disease virus type 2 (BDV-2 closely related to German ovine strains. The cross-neutralization studies of the semi-domesticated reindeer sera from Sweden suggested infection with a strain related to BDV-1 or BDV-2. The available data indicates that reindeer might be infected by a endemic species-specific BDV-like strain. However, the interspecies transmission of BVDV from domestic animals should not be excluded, since the

  5. Pestivirus infection in reindeer (Rangifer tarandus).

    Science.gov (United States)

    Larska, Magdalena

    2015-01-01

    Reindeer species (Rangifer tarandus, Linnaeus, 1758) includes wild and semi-domesticated ruminants belonging to Capreaolinae subfamily of Cervidae family reared in Eurasia (reindeer subspecies) and North America (caribou subspecies). Herding of reindeer has a great historical, socio-economic and ecological importance, especially to indigenous ethnic minorities. Infectious disease threats may therefore impact not solely the animal population driving it to further extinction and irreversible alterations to the wild environments of northern hemisphere, but also add to cultural changes observed as negative impact of globalization. Introduction of new technologies to control of reindeer migration between dwindling pasture areas and intensification of reindeer husbandry may facilitate the intra- and interspecies transmission of pathogens. The role of the reindeer as a potential BVDV reservoir has been studied, however, the number of publications is rather limited. The observed seroprevalences of the virus varied significantly between different geographical regions with different epidemiological situation. Most frequently limited number of animals studied and the differences in the sensitivities and specificities of the diagnostic test used could have also influenced on the differences between the studies. No pestivirus has been ever detected in free-ranging reindeer, however, a putative pestivirus strain named V60-Krefeld has been isolated from reindeer kept at a German Zoo in the 1990's. The virus was characterized as border disease virus type 2 (BDV-2) closely related to German ovine strains. The cross-neutralization studies of the semi-domesticated reindeer sera from Sweden suggested infection with a strain related to BDV-1 or BDV-2. The available data indicates that reindeer might be infected by a endemic species-specific BDV-like strain. However, the interspecies transmission of BVDV from domestic animals should not be excluded, since the susceptibility of reindeer

  6. Pestivirus infection in reindeer (Rangifer tarandus)

    Science.gov (United States)

    Larska, Magdalena

    2015-01-01

    Reindeer species (Rangifer tarandus, Linnaeus, 1758) includes wild and semi-domesticated ruminants belonging to Capreaolinae subfamily of Cervidae family reared in Eurasia (reindeer subspecies) and North America (caribou subspecies). Herding of reindeer has a great historical, socio-economic and ecological importance, especially to indigenous ethnic minorities. Infectious disease threats may therefore impact not solely the animal population driving it to further extinction and irreversible alterations to the wild environments of northern hemisphere, but also add to cultural changes observed as negative impact of globalization. Introduction of new technologies to control of reindeer migration between dwindling pasture areas and intensification of reindeer husbandry may facilitate the intra- and interspecies transmission of pathogens. The role of the reindeer as a potential BVDV reservoir has been studied, however, the number of publications is rather limited. The observed seroprevalences of the virus varied significantly between different geographical regions with different epidemiological situation. Most frequently limited number of animals studied and the differences in the sensitivities and specificities of the diagnostic test used could have also influenced on the differences between the studies. No pestivirus has been ever detected in free-ranging reindeer, however, a putative pestivirus strain named V60-Krefeld has been isolated from reindeer kept at a German Zoo in the 1990’s. The virus was characterized as border disease virus type 2 (BDV-2) closely related to German ovine strains. The cross-neutralization studies of the semi-domesticated reindeer sera from Sweden suggested infection with a strain related to BDV-1 or BDV-2. The available data indicates that reindeer might be infected by a endemic species-specific BDV-like strain. However, the interspecies transmission of BVDV from domestic animals should not be excluded, since the susceptibility of

  7. Clinical outbreak of babesiosis caused by Babesia capreoli in captive reindeer (Rangifer tarandus tarandus) in the Netherlands

    NARCIS (Netherlands)

    Bos, Jan H; Klip, Fokko C; Sprong, Hein; Broens, Els M|info:eu-repo/dai/nl/314627723; Kik, Marja J L|info:eu-repo/dai/nl/080432565

    2017-01-01

    From a herd of captive reindeer (Rangifer tarandus tarandus) consisting of two males and seven females with five calves, three calves were diagnosed on post mortem examination with a Babesia capreoli infection. The diagnosis was indicated by PCR and when the other reindeer were examined two adult

  8. Clinical outbreak of babesiosis caused by Babesia capreoli in captive reindeer (Rangifer tarandus tarandus) in the Netherlands.

    NARCIS (Netherlands)

    Bos, Jan H; Klip, Fokko C; Sprong, Hein; Broens, Els M; Kik, Marja J L

    From a herd of captive reindeer (Rangifer tarandus tarandus) consisting of two males and seven females with five calves, three calves were diagnosed on post mortem examination with a Babesia capreoli infection. The diagnosis was indicated by PCR and when the other reindeer were examined two adult

  9. Genetic variation in caribou and reindeer (Rangifer tarandus).

    Science.gov (United States)

    Cronin, M A; Patton, J C; Balmysheva, N; MacNeil, M D

    2003-02-01

    Genetic variation at seven microsatellite DNA loci was quantified in 19 herds of wild caribou and domestic reindeer (Rangifer tarandus) from North America, Scandinavia and Russia. There is an average of 2.0-6.6 alleles per locus and observed individual heterozygosity of 0.33-0.50 in most herds. A herd on Svalbard Island, Scandinavia, is an exception, with relatively few alleles and low heterozygosity. The Central Arctic, Western Arctic and Porcupine River caribou herds in Alaska have similar allele frequencies and comprise one breeding population. Domestic reindeer in Alaska originated from transplants from Siberia, Russia, more than 100 years ago. Reindeer in Alaska and Siberia have different allele frequencies at several loci, but a relatively low level of genetic differentiation. Wild caribou and domestic reindeer in Alaska have significantly different allele frequencies at the seven loci, indicating that gene flow between reindeer and caribou in Alaska has been limited.

  10. Reindeer and caribou (Rangifer tarandus response towards human activities

    Directory of Open Access Journals (Sweden)

    Eigil Reimers

    2009-01-01

    Full Text Available We address the question of how human activities and infrastructure influence reindeer/caribou’s (Rangifer tarandus behaviour and habitat use and review studies based on current methodologies. Anthropogenic activities have a direct affect on Rangifer behaviour through the senses hearing, sight and smell, and all of these are important tools for behavioural risk assessment. Short term indirect responses, such as habituation, sensitisation, avoidance, and displacement, develop through neutral, positive or negative associations towards stimulus in terms of Rangifer’s ability to experience, learn, and remember. Long term behavioural responses develop through interaction with predators and, for reindeer, also domestication. A survey of the literature dealing with behavioural studies reveals that although Rangifer in most cases retreat from anthropogenic activities, comfort distances (i.e. distances beyond which animal behaviour or activity are not influenced are relatively short. In most cases, energetic implications appear moderate and small compared to other natural, biotic influences such as disturbance (and death caused by insect and/or predator harassment. Unless obstructing access, physical constructions of various kinds apparently have limited effects on Rangifer behaviour or habitat use. On the other hand, constructions that do obstruct or limit access and recreational or other motorized and non-motorized activities appear to have stronger impacts on avoidance and redistribution of Rangifer. Behavioural effects that might decrease survival and reproduction include retreat from favourable habitat near disturbance sources and reduction of time spent feeding with resulting energy depletion over time. Rangifer habitat use, habitat avoidance, and feeding preferences are governed by a complexity of natural interacting factors. Domestication, habituation and sensitisation are essential in shaping Rangifer’s adaptability, and should be included

  11. Experimental oral transmission of chronic wasting disease to reindeer (Rangifer tarandus tarandus.

    Directory of Open Access Journals (Sweden)

    Gordon B Mitchell

    Full Text Available Chronic wasting disease (CWD, a transmissible spongiform encephalopathy of cervids, remains prevalent in North American elk, white-tailed deer and mule deer. A natural case of CWD in reindeer (Rangifer tarandus tarandus has not been reported despite potential habitat overlap with CWD-infected deer or elk herds. This study investigates the experimental transmission of CWD from elk or white-tailed deer to reindeer by the oral route of inoculation. Ante-mortem testing of the three reindeer exposed to CWD from white-tailed deer identified the accumulation of pathological PrP (PrP(CWD in the recto-anal mucosa associated lymphoid tissue (RAMALT of two reindeer at 13.4 months post-inoculation. Terminal CWD occurred in the two RAMALT-positive reindeer at 18.5 and 20 months post-inoculation while one other reindeer in the white-tailed deer CWD inoculum group and none of the 3 reindeer exposed to elk CWD developed disease. Tissue distribution analysis of PrP(CWD in CWD-affected reindeer revealed widespread deposition in central and peripheral nervous systems, lymphoreticular tissues, the gastrointestinal tract, neuroendocrine tissues and cardiac muscle. Analysis of prion protein gene (PRNP sequences in the 6 reindeer identified polymorphisms at residues 2 (V/M, 129 (G/S, 138 (S/N and 169 (V/M. These findings demonstrate that (i a sub-population of reindeer are susceptible to CWD by oral inoculation implicating the potential for transmission to other Rangifer species, and (ii certain reindeer PRNP polymorphisms may be protective against CWD infection.

  12. Ultrastructure of the cysts of Sarcocystis rangi from skeletal muscle of reindeer (Rangifer tarandus tarandus

    Directory of Open Access Journals (Sweden)

    Bjørn Gjerde

    1985-05-01

    Full Text Available Mature muscle cysts of Sarcocystis rangi from Rangifer tarandus were examined by transmission electron microscopy. The long and slender cysts were located within skeletal muscle cells, and were bounded by a unit membrane, the cyst membrane. The cysts were provided with closely spaced flexible, hairlike surface processes, measuring up to 12.6 |im in length and 0.3 to 0.6 \\lm in diameter. The projections had a smooth surface, whereas the cyst membrane formed numerous hexagonally packed vesicular invaginations between the bases of the projections. The cyst membrane was reinforced by an underlying thin layer of electron-dense material, except at the points where it was invaginated. Cyst ground substance formed a thin layer at the periphery of the cysts, filled the core of the projections, and formed thin septa that divided the interior of the cysts into numerous compartments. Most compartments contained a large number of tightly packed cystozoites, whereas a few metrocytes were forund in each of a few compartments at the periphery of the cysts. Some of the cystozoites multiplied by endodyogeny. The metrocytes displayed a vacuolation of their cytoplasm. The cysts of S. rangi were similar in surface morphology to the sarcocysts of certain other Sarcocystis species reported from other intermediate hosts.Ultrastrukturen til cyster av Sarcocystis rangi frå skjelettmuskulaturen hos rein.Abstract in Norwegian / Samandrag: Muskelcyster av S. rangi frå rein vart undersøkt ved transmisjonselektronmikroskopi. Dei lange cystene låg intracellulært i skjelettmuskelceller, og var avgrensa av ein elementærmembran, cystemembranen. Cystene var utstyrt med talrike hårliknande overflateprosessar, som strekte seg langsetter cysteoverflata. Prcsessane var opptil 12.6 Hm lange, og målte 0.3 til 0.6 \\lm i diameter. Prosessane hadde ei glatt overflate, medan cystemembranen danna talrike regelmessige ordna, små invaginasjonar innimellom basis av prosessane

  13. Reindeer (Rangifer tarandus and climate change: Importance of winter forage

    Directory of Open Access Journals (Sweden)

    Thrine Moen Heggberget

    2002-06-01

    Full Text Available As a consequence of increasing greenhouse gas concentrations, climate change is predicted to be particularly pronounced, although regionally variable, in the vast arctic, sub-arctic and alpine tundra areas of the northern hemisphere. Here, we review winter foraging conditions for reindeer and caribou (Rangifer tarandus living in these areas, and consider diet, forage quality and distribution, accessibility due to snow variation, and effects of snow condition on reindeer and caribou populations. Finally, we hypothesise how global warming may affect wild mountain reindeer herds in South Norway. Energy-rich lichens often dominate reindeer and caribou diets. The animals also prefer lichens, and their productivity has been shown to be higher on lichen-rich than on lichen-poor ranges. Nevertheless, this energy source appears to be neither sufficient as winter diet for reindeer or caribou (at least for pregnant females nor necessary. Some reindeer and caribou populations seem to be better adapted to a non-lichen winter diet, e.g. by a larger alimentary tract. Shrubs appear to be the most common alternative winter forage, while some grasses appear to represent a good, nutritionally-balanced winter diet. Reindeer/caribou make good use of a wide variety of plants in winter, including dead and dry parts that are digested more than expected based on their fibre content. The diversity of winter forage is probably important for the mineral content of the diet. A lichen-dominated winter diet may be deficient in essential dietary elements, e.g. minerals. Sodium in particular may be marginal in inland winter ranges. Our review indicates that most Rangifer populations with lichen-dominated winter diets are either periodically or continuously heavily harvested by humans or predators. However, when population size is mainly limited by food, accessible lichen resources are often depleted. Plant studies simulating climatic change indicate that a warmer, wetter

  14. Biochemical and hematologic reference values for free-ranging, chemically immobilized wild norwegian reindeer (rangifer tarandus tarandus) during early winter.

    Science.gov (United States)

    Miller, Andrea L; Evans, Alina L; Os, Øystein; Arnemo, Jon M

    2013-04-01

    Hematologic and serum biochemistry values were evaluated in free-ranging, wild Norwegian reindeer (Rangifer tarandus tarandus) as part of a reintroduction program in southwestern Norway in November 1995 and 1996. Animals were immobilized with medetomidine-ketamine by dart from a helicopter. Blood was drawn for serum chemistry from 31 adults (nine males and 22 females) and for hematology from 29 adults (eight males and 21 females). Significant differences (Ppaper provides the first report of baseline hematologic and serum biochemistry reference ranges for free-ranging, wild Norwegian reindeer during early winter.

  15. Fibre composition and enzyme activities in six muscles of the Swedish reindeer (Rangifer tarandus tarandus

    Directory of Open Access Journals (Sweden)

    K-H. Kiessling

    1983-05-01

    Full Text Available Six skeletal muscles have been studied as regards fibre properties and enzyme activities. The muscles are cranial part of M. gluteobiceps, M. semitendinosus, M. semimembranosus, M. longissimus dorsi, M. brachiocephalicus and M. sternocephalicus. Two histochemical methods were used for fibre identification, one based on myosin ATPase activities after preincubation at pH 4.3 and 4.6 and the other on oxidative capacity measured as NADH dehydrogenase activity. The two methods gave slightly differing results but allowed the general conclusion that of the three fibre types (I, II A and II B the type II B fibres, which are fast-twitch, glycolytic, make up some 40 - 60 % (mean 50 % of the muscles. Type I fibres, which are slow-twitch, oxidative, account for 30% of the total muscle volume in the two neck muscles but for only 20% or less in the rest. The third type, II A, which is fast-twitch, oxidative, glycolytic, accounts for only 20% of the volume in the neck muscles but as much as 40% in M. longissimus dorsi. Oxidative capacity is high throughout. This is valid also to the capacity to oxidize fatty acids, though reaching only half the activity previously found in the Svalbard reindeer (Kiessling and Kiessling, 1983. Lactate dehydrogenase activity is comparatively low in all muscles. The high respiratory chain activity and fatty acid oxidation and the low lactate dehydrogenase activities do not fit at all well with the high content of type II B fibres in the muscles. This high II B content is also unexpected when considering the activity pattern of the reindeer. An altogether different role for the type II B fibres, besides the traditional one, is therefore discussed.Fibersammansåttning och enzymaktiviteter i sex muskler från svensk tamren (Rangifer tarandus tarandus.Abstract in Swedish / Sammandrag: Sex skelettmuskler har undersokts med avseende på fiberegenskaper och enzymaktiviteter. De sex musklerna år kranial del av M. gluteobiceps. M

  16. Clinical outbreak of babesiosis caused by Babesia capreoli in captive reindeer (Rangifer tarandus tarandus) in the Netherlands.

    Science.gov (United States)

    Bos, Jan H; Klip, Fokko C; Sprong, Hein; Broens, Els M; Kik, Marja J L

    2017-08-01

    From a herd of captive reindeer (Rangifer tarandus tarandus) consisting of two males and seven females with five calves, three calves were diagnosed on post mortem examination with a Babesia capreoli infection. The diagnosis was indicated by PCR and when the other reindeer were examined two adult females and a one-year-old male were Babesia-positive. Molecular characterization of the 18S rDNA of the parasite showed complete identity with known B. capreoli sequences. Ixodes ricinus has been demonstrated to be a competent vector for B. capreoli from infected roe deer (Capreolus capreolus), the natural host of B. capreoli. The B. capreoli infection in these reindeer may have been transmitted by infected ticks (Ixodes ricinus) originating from roe deer living in the forest and meadows surrounding the enclosure. Copyright © 2017 Elsevier GmbH. All rights reserved.

  17. Orphan caribou, Rangifer tarandus, calves: A re-evaluation of overwinter survival data

    Science.gov (United States)

    Joly, Kyle

    2000-01-01

    Low sample size and high variation within populations reduce power of statistical tests. These aspects of statistical power appear to have affected an analysis comparing overwinter survival rates of non-orphan and orphan Caribou (Rangifer tarandus) calves by an earlier study for the Porcupine Caribou Herd. A re-evaluation of the data revealed that conclusions about a lack of significant difference in the overwinter survival rates between orphan and non-orphan calves were premature.

  18. Lymphatic dwelling filarioid nematodes in reindeer Rangifer tarandus tarandus, (cervidae) in Finland, identified as Rumenfilaria andersoni Lankester & Snider, 1982 (nematoda: Onchocercidae: Splendidofilariinae).

    Science.gov (United States)

    Laaksonen, S; Saari, S; Nikander, S; Oksanen, A; Bain, O

    2010-03-01

    A filarioid nematode inhabiting the lymphatic vessels of the subserosal rumen and mesenteries associated with a high prevalence of its microfilariae in peripheral blood was observed in Finnish reindeer (Rangifer tarandus tarandus) in 2004 and 2006. Adult specimens were collected by dissecting lymphatic vessels from slaughtered animals, where some of the nematodes were seen through the wall of the dilated vessels as thin white winding threads obscuring the vessel. The morphology of adult worms and microfilaria is described based on light and scanning electron microscopy. These filariae belong to the subfamily Splendidofilariinae of the Onchocercidae and resemble Rumenfilaria andersoni, recovered from different host and localization, the ruminal veins of Alces alces in Canada. Comparison of paratypes of this species revealed only minor differences which were not sufficient to separate the filarioid parasitic in R. tarandus in Finland and we identify the nematode as R. andersoni. However, the findings suggest two different parasite populations. The finalizing of this taxonomic question in the future requires an integrated approach, in which the DNA-based and morphological identifications are consistent.

  19. Lymphatic dwelling filarioid nematodes in reindeer Rangifer tarandus tarandus, (Cervidae in Finland, identified as Rumenfilaria andersoni Lankester & Snider, 1982 (Nematoda: Onchocercidae: Splendidofilariinae

    Directory of Open Access Journals (Sweden)

    Laaksonen S.

    2010-03-01

    Full Text Available A filarioid nematode inhabiting the lymphatic vessels of the subserosal rumen and mesenteries associated with a high prevalence of its microfilariae in peripheral blood was observed in Finnish reindeer (Rangifer tarandus tarandus in 2004 and 2006. Adult specimens were collected by dissecting lymphatic vessels from slaughtered animals, where some of the nematodes were seen through the wall of the dilated vessels as thin white winding threads obscuring the vessel. The morphology of adult worms and microfilaria is described based on light and scanning electron microscopy. These filariae belong to the subfamily Splendidofilariinae of the Onchocercidae and resemble Rumenfilaria andersoni, recovered from different host and localization, the ruminal veins of Alces alces in Canada. Comparison of paratypes of this species revealed only minor differences which were not sufficient to separate the filarioid parasitic in R. tarandus in Finland and we identify the nematode as R. andersoni. However, the findings suggest two different parasite populations. The finalizing of this taxonomic question in the future requires an integrated approach, in which the DNAbased and morphological identifications are consistent.

  20. Effects of medetomidine and atipamezole on serum glucose and cortisol levels in captive reindeer (Rangifer tarandus tarandus

    Directory of Open Access Journals (Sweden)

    Jon M. Arnemo

    1999-04-01

    Full Text Available Serum concentrations of glucose and Cortisol were measured in five adult captive reindeer (Rangifer tarandus tarandus at 24 h and 10 min before, and at 0.5, 1,2,4, 8, 12 and 24 h after, treatment with 60 p.g/kg of medetomidine i.v. followed by 300 jig/kg of atipamezole i.v. 60 min later. The experiments were performed in January and repeated in July-August. The animals were used as their own controls and treated with saline in July-August. The wash-out period between experiments in summer was 2 weeks or more. No obvious seasonal differences were observed. Mederomidine induced a 2.5-fold increase in glucose (mean ± standard error of the mean being 15.4 ± 0.6 mmol/1 at 1 h and a 3.5-fold increase Cortisol (349 ± 28 nmol/1 at 0.5 h. Serum glucose reached control levels within 12 h, and Cortisol declined to baseline levels within 4 h after injection og medetomidine. The use of blood concentrations of glucose and Cortisol to assess nutritonal status, body condition and stress may be significantly biased in animals chemically immobilized with medetomidine or other alpha-2 adrenoceptor agonists.

  1. Evidence of parapox-, alphaherpes- and pestivirus infections in carcasses of semi-domesticated reindeer (Rangifer tarandus tarandus from Finnmark, Norway

    Directory of Open Access Journals (Sweden)

    Morten Tryland

    2005-03-01

    Full Text Available During March to May 2000, 48 carcasses of semi-domesticated reindeer (Rangifer tarandus tarandus were collected on winter pastures and calving grounds from two herds in western Finnmark and two herds in eastern Finnmark, northern Norway. The animals were autopsied and blood and tissue samples were collected for serology (alphaherpes- and pestivirus; virus neutralization test and polymerase chain reaction (PCR; parapoxvirus; B2L gene investigations. Autopsy revealed that 39 of 48 animals (81% had died of emaciation. Parapoxvirus-specific DNA was detected in samples from 6 of 48 animals (12.5%; liver, parotid salivary gland and/or pulmonary lymph nodes. A DNA sequence of 376 base pairs from a PCR amplicon obtained from a liver sample from one animal showed 98-99% identity with orf virus strain Orf-11 and reindeer parapoxvirus isolates from Norway and Finland (1992 and 1994, 92-93% similarity with pseudocowpoxvirus and 87% similarity with bovine papular stomatitis virus. Alphaherpes- and pestivirus antibodies were detected in 10% and 33% of the animals, respectively. These results indicates that parapoxvirus, presumably orf-virus, is present among reindeer also in Finnmark, although contagious ecthyma has never been reported in reindeer in this important reindeer herding area. Furthermore, they show that herpes- and pestiviruses are still endemic in reindeer herds in Finnmark. The nature of these viruses and their impact on reindeer health and reproduction and reindeer herding economy should be further addressed, as well as the possibility that these viruses may be transferred between reindeer and domestic animals in this region.Abstract in Norwegian / Sammendrag: I løpet av perioden mars-mai 2000 ble 48 reinsdyrkadavre (Rangifer tarandus tarandus samlet inn fra vinterbeiter og kalvingsområder fra to flokker i Vest-Finnmark og to i Øst-Finnmark, Norge. Dyrene ble obdusert, og blod og vevsprøver ble samlet for påvisning av antistoffer mot

  2. Growth and relationship of live weight to body measurements in semi-domesticated reindeer (Rangifer tarandus tarandus L.

    Directory of Open Access Journals (Sweden)

    Mauri Nieminen

    1990-09-01

    Full Text Available Estimation of live weight from measurements of body dimensions is useful in many management activities with domestic animals. In present study live weight was measured from 2932 female and 1037 male semi-domesticated reindeer (Rangifer tarandus tarandus L. during different seasons in 1969-85. The age of reindeer varied between 1 day and 14 yrs. Back length (along back from second spinous process to base of tail and chest girth (just behind front legs were taken also from 1490 female and 510 male reindeer. The growth of reindeer from birth to adulthood was cumulative consisting of a rapid weight accretion during summers followed by a weight loss or stasis during winters. The mathematical analyses of the growth based on exponential solutions gave average values for growth of female and male reindeer. Body weight of females increased until the age of 4.5 yrs and that of males until the age of 5.5 yrs. During winter and spring body weight of hinds decreased 10 to 15 kg and that of stags 30 to 50 kg in different age groups. Significant linear regressions were found between live weight and back length (r = 0.809 and 0.892, live weight and chest girth (r = 0.860 and 0.872 and live weight and combined body measure (back length + chest girth (r = 0.877 and 0.941 and live weight and body volume (r = 0.905 and 0.954, respectively in female and male reindeer. Exponential regressions gave, however, the best estimations of live weight with combined body measure.

  3. Snow conditions and usability value of pastureland for semi-domesticated reindeer (Rangifer tarandus tarandus in northern boreal forest area

    Directory of Open Access Journals (Sweden)

    Jouko Kumpula

    2009-01-01

    Full Text Available We studied variation in snow conditions and selection of pasture area according to altitude by semi-domesticated reindeer (Rangifer tarandus tarandus during 1999 - 2002 in a pine forest area utilised by forest industry in the Ivalo reindeer herding district, northern Finland. Snow conditions were measured over the course of three winters along equilateral triangles (side 3.5 km for three times per winter. The altitudinal selection of pasture area by reindeer was studied using GPS tracking data (10 977 locations from 29 female reindeer. We observed that interannual weather variation mostly affected the depth, density and hardness of snow in the study area. At the forest landscape level, snow depth and density increased with altitude. Thinnest and deepest snow cover occurred on western and northern slopes, respectively. In contrast, forest harvesting did not seem to affect snow conditions. From spring to autumn, reindeer mainly used higher altitudes in pastures. In early and mid-winter, when snow conditions were easy or moderate reindeer still preferred higher altitudes, but in late winter when snow conditions and food accession were at their most difficult, they preferred lower altitudes. We conclude that especially the use of high elevation forestland pastures may become more difficult for reindeer if the global climatic change causes higher winter precipitation to the northern boreal forest area. In general, the low-elevation forestland areas have primary winter grazing value for reindeer but these areas are also intensively used by forest industry.Abstract in Finnish / Tiivistelmä:Lumiolosuhteet ja laidunten käyttöarvo poronhoidossa pohjoisella havumetsäaluella Lumiolosuhteiden vaihtelua ja porojen (Rangifer tarandus tarandus laidunalueen valintaa maaston korkeuden perusteella tutkittiin vuosina 1999–2002 metsätalouden hyödyntämällä mäntymetsäalueella Ivalon paliskunnassa, Pohjois-Suomessa. Lumiolosuhteet mitattiin kolme kertaa

  4. Calf mortality of semi-domesticated reindeer (Rangifer tarandus tarandus in the Finnish reindeer-herding area

    Directory of Open Access Journals (Sweden)

    Mauri Nieminen

    2013-06-01

    Full Text Available Normal 0 21 false false false SV X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Normal tabell"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-fareast-language:EN-US;} During 1999-2008 calf mortality was studied in six reindeer-herding cooperatives in Northern Finland, where 3942 semi-domesticated reindeer (Rangifer tarandus tarandus calves were equipped with radio mortality collars. The calves were weighed and earmarked mostly at 2-5 days of age, or at 2-8 weeks of age. Altogether 460 dead radio-collared calves were found from calving in May until winter round-ups in October-January. In northern mountain herding cooperatives, the average mortality of calves varied between 7-12%. On average, 39-54% of calves found dead were attributed to predation. Golden eagles killed 0-3.5% of calves in different years and areas in Ivalo and Käsivarsi cooperatives. Golden eagles were responsible for 33-43% of the cases and 84-93% of all identified predation. Most calves killed by golden eagles were found in July-August and in open areas. Calves killed by golden eagles were significantly (P<0.01 lighter than those not predated. No predation occurred in the Poikajärvi cooperative, but the annual mortality of calves varied between 0-35% in cooperatives near the Russian border. In Oivanki cooperative brown bears killed on average 2% of the radio-collared calves. Most predation (87% occurred at the end of May and in early June. In the Kallioluoma cooperative, predator-killed calves found

  5. Forage chemistry and the digestive system in reindeer (Rangifer tarandus tarandus in northern Norway and on South Georgia

    Directory of Open Access Journals (Sweden)

    Svein D. Mathiesen

    1999-04-01

    Full Text Available Comparative chemical and botanical analyses of the reticulo-rumen content (RR and the fill of the digestive system were carried out in free-living Norwegian reindeer {Rangifer t. tarandus on South Georgia (SG in summer (mean body mass (BM = 74 kg, n - 10, and in northern Norway in late summer (NS (mean BM = 77 kg, n = 6 and winter (NW (mean BM = 60 kg, n = 11. The RR of SG reindeer contained mainly grasses, while grasses dominated in NS reindeer and woody plants and lichens in NW reindeer. Mean ruminal plant cell-wall contents (CWC comprised 37% of organic dry matter (OM in SG reindeer and 50 and 69% in NS and NW reindeer, respectively. The high CWC in NW reindeer was due to high intake of lichens containing as much as 45% hemi-cellulose. Mean ruminal content of lignin was as low as 5% of OM in SG reindeer, which was different (P < 0.05 from NS (14% and NW reindeer (15%, respectively. The mean total gastro-inresrinal tract (GIT (fill and tissue weight was 27% of BM in SG reindeer, different (P < 0.05 from NS (18% of BM and NW reindeer (22% of BM, respectively. Wet weight RR content was 14.5% of BM in SG reindeer, not different from NS (12.2% of BM and NW reindeer (14.2% of BM. The ratio between the wet weight content of the distal fermentation chamber (DFC and the RR wet weight content was 1:10 in SG reindeer, different (P < 0.05 from NS (1:14 and NW reindeer (1:14. We did not find any significant differences between the intestinal lengths of the groups investigated. It was concluded that the degree of fill of the different parts of GIT in reindeet seems to be related to the lignin content of plants eaten and not only of seasonal changes in appetite and availability of plants. Our data stress the fact that reindeer are highly adaptable to a wide range of different dietary plants, even in the southern hemisphere.

  6. Allosuckling in reindeer (Rangifer tarandus): milk-theft, mismothering or kin selection?

    Science.gov (United States)

    Engelhardt, Sacha C; Weladji, Robert B; Holand, Øystein; de Rioja, Covadonga M; Ehmann, Rosina K; Nieminen, Mauri

    2014-09-01

    Allosuckling, the suckling of offspring from females other than their own mother, has been reported in a number of mammalian species, including reindeer. The causes and function of this behaviour are still being investigated. We monitored 25 doe-calf pairs of semi-domestic reindeer Rangifer tarandus over 10 weeks to test three allosuckling/allonursing hypotheses: (1) milk theft, calves opportunistically allosuckle; (2) mismothering, misdirected maternal care; and (3) kin-selected allonursing. A calf soliciting an allosuckling bout was categorized as non-filial (NF), and a calf soliciting a suckling bout from its mother was categorized as filial (F). We recorded 9757 solicitations, of which 5176 were successful F bouts and 1389 were successful NF bouts. The rejection rates were greater for NF than F calves. The proportions of antiparallel positions adopted were greater for F than NF calves. The odds of an allobout were lower for calves arriving 1st, 3rd, 4th, 5th or 6th than for those arriving 2nd, but the odds did not vary with position adopted and relatedness. Our results provided support to the milk-theft hypothesis, whereas limited support for the mismothering hypothesis was found. Our results did not support the hypothesized kin selection function of allosuckling in reindeer. This article is part of a Special Issue entitled: insert SI title. Copyright © 2014 Elsevier B.V. All rights reserved.

  7. Reindeer (Rangifer tarandus tarandus feeding on lichens and mushrooms: traditional ecological knowledge among reindeer-herding Sami in northern Sweden

    Directory of Open Access Journals (Sweden)

    Berit Inga

    2009-01-01

    Full Text Available The study was performed in four reindeer-herding districts (Sami villages in northern Sweden. Reindeer herding Sami, born in 1950 or earlier, were interviewed about reindeer foraging behaviour on lichens and mushrooms, especially relating to non-summer grazing habits, and about characteristics of a good winter feeding ground. The informants claimed that lichens are preferably grazed in the wintertime, but that they also may be eaten in the summertime when the weather is cold and humid. Mushrooms were chosen in the autumn months August and September, but according to some informants mushrooms may also be eaten during late autumn (from Oct. when frozen and under the snow. The reindeer herders had different names for lichens, which in general terms describe their appearance and habitat. For mushrooms they only used one Sami name. Ground lichens preferred by reindeer are Cladonia species, while the nitrogen-fixing lichen species such as Nephroma arcticum and Stereocaulon pascale were said not to be preferred by the reindeer. Snow conditions are very important, and the less snow (and the softer it is, the better. Habitats where reindeer herders know from experience that snow conditions tend to be problematic, e.g. in moist and open areas with small trees, are used early in the winter (Oct.–Jan., before too much snow has accumulated. A good winter grazing area should have lichens. It is preferably a dry pine (Pinus sylvestris forest heath with large, old and wide-crowned trees to shelter the ground from snow and thereby ease the cratering by reindeer. Abstract in Swedish / Sammanfattning: Renens (Rangifer tarandus tarandus bete av lavar och svampar: Traditionell ekologisk kunskap bland renskötande samer i norra Sverige Studien genomfördes i fyra renskötseldistrikt (samebyar i norra Sverige. Totalt 22 renskötande samer, födda 1950 eller tidigare, blev intervjuade om renens betande av lavar och svampar, renens vinterbete och om vad som karakt

  8. Mineral constraints on arctic caribou (Rangifer tarandus): a spatial and phenological perspective

    Science.gov (United States)

    Oster, K. W.; Barboza, P.S.; Gustine, David D.; Joly, Kyle; Shively, R. D.

    2018-01-01

    Arctic caribou (Rangifer tarandus) have the longest terrestrial migration of any ungulate but little is known about the spatial and seasonal variation of minerals in summer forages and the potential impacts of mineral nutrition on the foraging behavior and nutritional condition of arctic caribou. We investigated the phenology, availability, and mechanistic relationships of calcium, phosphorus, magnesium, sodium, potassium, iron, manganese, copper, and zinc in three species of woody browse, three species of graminoids, and one forb preferred by caribou over two transects bisecting the ranges of the Central Arctic (CAH) and Western Arctic (WAH) caribou herds in Alaska. Transects traversed three ecoregions (Coastal Plain, Arctic Foothills and Brooks Range) along known migration paths in the summer ranges of both herds. Concentrations of mineral in forages were compared to estimated dietary requirements of lactating female caribou. Spatial distribution of the abundance of minerals in caribou forage was associated with interactions of soil pH and mineral content, while temporal variation was related to plant maturity, and thus nitrogen and fiber content of forages. Concentrations of sodium were below caribou requirements in all forage species for most of the summer and adequate only on the Coastal Plain during the second half of summer. Phosphorus declined in plants from emergence to senescence and was below requirements in all forages by mid‐summer, while concentrations of copper declined to marginal concentrations at plant senescence. Interactions of sodium with potassium, calcium with phosphorus, and copper with zinc in forages likely exacerbate the constraints of low concentrations sodium, phosphorus, and copper. Forages on the WAH contained significantly more phosphorus and copper than forages collected on the CAH transect. We suspect that migrations of caribou to the Arctic Coastal Plain may allow parturient females to replenish sodium stores depleted by

  9. Status of northern mountain caribou (Rangifer tarandus caribou in Yukon, Canada

    Directory of Open Access Journals (Sweden)

    Troy M. Hegel

    2013-06-01

    Full Text Available Normal 0 21 false false false SV X-NONE X-NONE Caribou (Rangifer tarandus are an important ecological, cultural and economic resource in Yukon, Canada. Three caribou ecotypes occur within Yukon: Grant’s (R. t. granti, northern mountain (R. t. caribou, and boreal (R. t. caribou. Northern mountain caribou are classified as a species of special concern under Canada’s Species at Risk Act, and a national management plan for northern mountain caribou was recently completed. Twenty-six northern mountain caribou herds occur at least partially within Yukon, representing approximately 30,000 – 35,000 animals. Active monitoring of Yukon’s northern mountain caribou began in earnest in the early 1980s. To date, over 200 fall composition surveys have been carried out, over 1000 animals have been fitted with radio-collars, and nearly 40 formal population estimates have been completed. Disease and contaminant monitoring of these caribou has indicated relatively low disease prevalence and contaminant loading. Northern mountain caribou are harvested in Yukon, with an average of 230 caribou harvested per year by licensed hunters (1995 – 2012 and an unknown number by First Nation hunters. Future challenges related to caribou management and conservation in Yukon include increasing levels of industrial development primarily through mineral exploration and development, ensuring harvest of these herds is conducted sustainably given the absence of total harvest information, inter-jurisdictional management of shared herds, existing uncertainty surrounding herd distribution and delineation, and dealing with vehicle-related mortality of caribou for certain herds. Overall, the population status (i.e., trend of eight herds is known, with two increasing, two decreasing, and four stable.

  10. Comparative response of Rangifer tarandus and other northern ungulates to climatic variability

    Directory of Open Access Journals (Sweden)

    Robert B. Weladji

    2002-06-01

    Full Text Available To understand the factors influencing life history traits and population dynamics, attention is increasingly being given to the importance of environmental stochasticity. In this paper, we review and discuss aspects of current knowledge concerning the effect of climatic variation (local and global on population parameters of northern ungu¬lates, with special emphasis on reindeer/caribou (Rangifer tarandus. We also restrict ourselves to indirect effects of climate through both forage availability and quality, and insect activity. Various authors have used different weather variables; with sometime opposite trends in resulting life history traits of ungulates, and few studies show consistent effects to the same climatic variables. There is thus little consensus about which weather variables play the most sig¬nificant role influencing ungulate population parameters. This may be because the effects of weather on ungulate pop¬ulation dynamics and life history traits are scale dependent and it is difficult to isolate climatic effects from density dependent factors. This confirms the complexity of the relationship between environment and ecosystem. We point out limits of comparability between systems and the difficulty of generalizing about the effect of climate change broadly across northern systems, across species and even within species. Furthermore, insect harassment appears to be a key climate-related factor for the ecology of reindeer/caribou that has been overlooked in the literature of climatic effects on large herbivores. In light of this, there is a need for further studies of long time series in assessing effects of climate variability on reindeer/caribou.

  11. Occurrence of Babesia species in captive reindeer (Rangifer tarandus) in Germany.

    Science.gov (United States)

    Wiegmann, Lisa; Silaghi, Cornelia; Obiegala, Anna; Karnath, Carolin; Langer, Sandra; Ternes, Kerstin; Kämmerling, Jens; Osmann, Christine; Pfeffer, Martin

    2015-06-30

    Two cases of acute babesiosis in captive reindeer (Rangifer tarandus) in two German zoos in 2009 and 2012 triggered this study to investigate the occurrence and species diversity of Babesia parasites infecting reindeer in different zoos and deer parks in Germany. Between June and December 2013, blood samples were taken from 123 clinically inapparent reindeer from 16 different facilities. Samples were tested for the presence of Babesia species DNA by conventional PCR and sequence analysis of part of the 18S rRNA gene. Also, Giemsa-stained smears of reindeer blood samples were examined for parasitaemia by light microscopy. The overall PCR-prevalence in blood samples was 23.6% (n=29). Comparison of sequenced amplicons with GenBank entries possibly revealed up to five different Babesia species: B. venatorum (n=19), B. capreoli (n=2) and B. capreoli-like (n=4), B. odocoilei-like (n=2) and B. divergens (n=1), while one sample turned out to be a Theileria sp. Out of the 16 facilities in the study, 12 housed at least one positive animal. In Giemsa-stained blood smears, intra-erythrocytic Babesia parasites were detected in samples of three reindeer from three locations. The high prevalence of Babesia infections implicates babesiosis to be a relevant infectious disease threat for captive reindeer in Germany. Consequently, reindeer with clinical signs compatible to those of acute babesiosis should either be tested for the presence of Babesia spp. DNA or blood smears should be examined for parasitaemia. Copyright © 2015 Elsevier B.V. All rights reserved.

  12. Influence of In-Situ Oil Sands Development on Caribou (Rangifer tarandus Movement.

    Directory of Open Access Journals (Sweden)

    Tyler Muhly

    Full Text Available In-situ oil sands development (ISD involves a network of facilities, wells, roads and pipelines to extract and transport subsurface bitumen. This technology is rapidly expanding and there is uncertainty whether ISDs restrict animal movement, leading to increased extinction probabilities for some wide-ranging species. Here we test for effects of simulated future (i.e., 50 years from now and current ISDs on simulated movements of woodland caribou (Rangifer tarandus, a threatened species across North America. In simulations of future scenarios, we varied the spacing and permeability of ISDs and the presence/absence of protected areas. Permeability was measured as the number of times simulated caribou crossed ISDs with different levels of modelled permeability. We estimated the effects of these factors on caribou step length and annual home range size, key metrics of small and large spatiotemporal scales of movement, respectively. Current caribou crossings of above-ground pipeline features of ISDs were measured using camera traps and compared to expected caribou crossing rates based on present-day caribou movement simulations. Current crossing rates were evaluated within the context of predicted future crossing success rates necessary to maintain caribou step lengths and home ranges. With few exceptions, permeability across ISDs was the main factor affecting caribou movement, more so than spacing between developments or the presence of protected areas. However, minimal permeability (crossing rates of c. 15% to 60%, relative to an undisturbed site was needed to maintain existing home range size and step lengths. The effect of permeability on home range size and step length was non-linear, suggesting that small increases in permeability would provide a disproportionately greater benefit to caribou movement. Our predictions demonstrate that maintaining permeability across ISDs is more important than spacing between leases or including protected areas

  13. Structure and annual increase in a population of West Greenland caribou (Rangifer tarandus groenlandicus

    Directory of Open Access Journals (Sweden)

    Henning Thing

    1982-05-01

    .  Calving adds as much as 40% new individuals to the herd, but following their two first months of life calf numbers were reduced to only 17 - 18% of the population (Fig. 6. This drastic die-off is mainly caused by an epidemical Escherischia coli arthritis. The mean calf mortality from September through May is only about 2 - 3% (Fig. 7, and consequently the annual recruitment averages 15%. Considering the average mortality rates of the other age classes in the population (approx. 7% the herd increment at the start of the hunting season (August amounts to only 10%. Mortality in the first year of life (60% is comparable to that of a broad spectrum of other wild Rangifer populations in northern regions (Fig. 7. However, in the Sisimiut herd reduction of calf numbers almost exclusively takes place during the first three months after birth, while in the other Rangifer populations calf mortality is more evenly distributed throughout the whole year. Struktur og årlig tilvækst i en bestand af vestgønlandsk vildren (Rangifer tarandus groenlandicus.Abstract in Danish / Sammendrag: Som et led i en større økologisk undersøgelse af den vestgrønlandske vildren (Rangifer tarandus groenlandicus er bestanden i Sisimiut-området (ca. 67 gr N blevet studeret med hensyn til køns- og aldersstruktur, flokstørrelse, kalv-simle forhold og kalvetilvækst. Sisimiut-bestanden tæller mellem 2500 og 3000 dyr, og består det meste af året hovedsagelig af ganske små flokke på op til 5 dyr. Koncentrationer på flere hundrede dyr ses kun i sommertiden i forbindelse med insektforstyrrelser. Der er en tydelig årsrytme i gennemsnitsstørrelsen af flokkene, således at der sker en jævn stigning fra midvinterens 1,4 dyr pr. flok til et højdepunkt i efter-kælvningstiden med knap 25 dyr pr. flok. Manglen på ulve samt de dårlige, nedslidte føderessourcer i området gør, at dyrene på alle årstider har en meget lille flokstørrelse sammenlignet med andre landes vildrenbestande. Omkring 50% af

  14. Pathology, clinical signs, and tissue distribution of Toxoplasma gondii in experimentally infected reindeer (Rangifer tarandus

    Directory of Open Access Journals (Sweden)

    Émilie Bouchard

    2017-12-01

    Full Text Available Toxoplasma gondii is a zoonotic parasite found in vertebrates worldwide for which felids serve as definitive hosts. Despite low densities of felids in northern Canada, Inuit people in some regions show unexpectedly high levels of exposure, possibly through handling and consumption of Arctic wildlife. Free-ranging caribou (Rangifer tarandus are widely harvested for food across the Canadian North, show evidence of seroexposure to T. gondii, and are currently declining in numbers throughout the Arctic. We experimentally infected three captive reindeer (conspecific with caribou with 1000, 5000 or 10,000 oocysts of T. gondii via stomach intubation to assess clinical signs of infection, pathology, and tissue distribution. An unexposed reindeer served as a negative control. Signs of stress, aggression, and depression were noted for the first two weeks following infection. By 4 weeks post infection, all infected reindeer were positive on a modified agglutination test at the highest titer tested (1:200 for antibodies to T. gondii. At 20 weeks post infection, no gross abnormalities were observed on necropsy. Following histopathology and immunohistochemistry, tissue cysts were visualized in the reindeer given the highest and lowest dose of oocysts. Focal pleuritis and alveolitis were associated with respiratory problems in reindeer given the middle dose. DNA of T. gondii was detected following traditional DNA extraction and conventional PCR on 25 mg samples from 17/33 muscles and organs, and by magnetic capture DNA extraction from 100 g samples from all 26 tissues examined. This research demonstrated that reindeer/caribou can serve as intermediate hosts for T. gondii, and that the parasite may be associated with health effects in wildlife. The presence of T. gondii in all tissues tested, many of which are commonly consumed raw, smoked, or dried in northern communities, suggests that caribou may serve as a source of human exposure to T

  15. Concentrations and geographical variations of selected toxic elements in meat from semi-domesticated reindeer (Rangifer tarandus tarandus L.) in mid- and northern Norway: evaluation of risk assessment.

    Science.gov (United States)

    Hassan, Ammar Ali; Brustad, Magritt; Sandanger, Torkjel M

    2012-05-01

    Meat samples (n = 100) from semi-domesticated reindeer (Rangifer tarandus tarandus L.) were randomly collected from 10 grazing districts distributed over four Norwegian counties in 2008 and 2009. The main aim was to study concentrations and geographical variations in selected toxic elements; cadmium (Cd), lead (Pb), arsenic (As), copper (Cu), nickel (Ni) and vanadium (V) in order to assess the risk associated with reindeer meat consumption. Sample solutions were analysed using an inductively coupled plasma high resolution mass spectrometer (ICP-HRMS), whereas analysis of variance (ANOVA) was used for statistical analyses. Geographical variations in element concentrations were revealed, with As and Cd demonstrating the largest geographical differences. No clear geographical gradient was observed except for the east-west downward gradient for As. The As concentrations were highest in the vicinity of the Russian border, and only Cd was shown to increase with age (p < 0.05). Sex had no significant effect on the concentration of the studied elements. The concentrations of all the studied elements in reindeer meat were generally low and considerably below the maximum levels (ML) available for toxic elements set by the European Commission (EC). Thus, reindeer meat is not likely to be a significant contributor to the human body burden of toxic elements.

  16. Growth, condition, and mortality of caribou (Rangifer tarandus groenlandicus in the Sisimiut Population, West Greenland

    Directory of Open Access Journals (Sweden)

    Vidar Holthe

    1984-05-01

    Full Text Available Growth and condition of the Sisimiut caribou was anlysed by means of mandible length, carcass weight, and back fat indices. Mandible lenght showed unchanged growth conditions since the late 1960s, and growth stops at 4 years of age. The Sisimiut caribou seems to be smaller than North American caribous, Greenlandic semi-domesticated reindeer and of same size or smaller than Scandinavian reindeer. Carcass weight showed similar results, however cow growth rate seems not to prolong sexual maturation. Back fat deposits were less than what is known from other reindeer and caribou populations. Sex and age distribution of mandibles from various materials and survival curves based on the same material shows — an uneven distribution between bulls and cows and a relatively large proportion of old cows in the bag from the last years, which seems to be caused by a light hunting pressure when the population peaked in the 1960s. Heavy natural mortality for animals born before or after a winter with unfavorable snow conditions was also showed.Vækst, kondition og dødelighed hos vildren (Rangifer tarandus groenlandicus i Sisimiut-bestanden, Vestgrønland.Abstract in Danish / Sammendrag: Vækst- og konditionsforhold for Sisimiut-vildrenbestanden i Vestgrønland er beskrevet ved hjæip af underkæbelængde, slagtevægt og rygfedt. Undersøgelsen af kæbelængde viste, at vækstforholdene havde været uforandret siden sidste halvdel af 1960-erne, at væksten standser ved 4-års alderen, samt at Sisimiut-vildrenen er mindre end de nordamerikanske caribou, Itinnera-tamrenen og på størrelse med eller mindre end skandinaviske rensdyr. Dette viste sig også ved sammenligninger af slagtevægt. Vægten af simlerne er dog ikke så ringe, at der kan iagttages nogen forsinkelse i kønsmodningen. Fedtreserverne ved indgangen til vinteren synes at være dårligere end i andre undersøgte rensdyrbestande. Køns- og aldersfordelingen blandt forskellige typer af indsamlet k

  17. Rumen and Cecum Microbiomes in Reindeer (Rangifer tarandus tarandus) Are Changed in Response to a Lichen Diet and May Affect Enteric Methane Emissions.

    Science.gov (United States)

    Salgado-Flores, Alejandro; Hagen, Live H; Ishaq, Suzanne L; Zamanzadeh, Mirzaman; Wright, André-Denis G; Pope, Phillip B; Sundset, Monica A

    2016-01-01

    Reindeer (Rangifer tarandus tarandus) are large Holarctic herbivores whose heterogeneous diet has led to the development of a unique gastrointestinal microbiota, essential for the digestion of arctic flora, which may include a large proportion of lichens during winter. Lichens are rich in plant secondary metabolites, which may affect members of the gut microbial consortium, such as the methane-producing methanogenic archaea. Little is known about the effect of lichen consumption on the rumen and cecum microbiotas and how this may affect methanogenesis in reindeer. Here, we examined the effects of dietary lichens on the reindeer gut microbiota, especially methanogens. Samples from the rumen and cecum were collected from two groups of reindeer, fed either lichens (Ld: n = 4), or a standard pelleted feed (Pd: n = 3). Microbial densities (methanogens, bacteria and protozoa) were quantified using quantitative real-time PCR and methanogen and bacterial diversities were determined by 454 pyrosequencing of the 16S rRNA genes. In general, the density of methanogens were not significantly affected (p>0.05) by the intake of lichens. Methanobrevibacter constituted the main archaeal genus (>95% of reads), with Mbr. thaueri CW as the dominant species in both groups of reindeer. Bacteria belonging to the uncharacterized Ruminococcaceae and the genus Prevotella were the dominant phylotypes in the rumen and cecum, in both diets (ranging between 16-38% total sequences). Bacteria belonging to the genus Ruminococcus (3.5% to 0.6%; p = 0.001) and uncharacterized phylotypes within the order Bacteroidales (8.4% to 1.3%; p = 0.027), were significantly decreased in the rumen of lichen-fed reindeer, but not in the cecum (p = 0.2 and p = 0.087, respectively). UniFrac-based analyses showed archaeal and bacterial libraries were significantly different between diets, in both the cecum and the rumen (vegan::Adonis: pseudo-Flichen-fed reindeer.

  18. Rumen and Cecum Microbiomes in Reindeer (Rangifer tarandus tarandus Are Changed in Response to a Lichen Diet and May Affect Enteric Methane Emissions.

    Directory of Open Access Journals (Sweden)

    Alejandro Salgado-Flores

    Full Text Available Reindeer (Rangifer tarandus tarandus are large Holarctic herbivores whose heterogeneous diet has led to the development of a unique gastrointestinal microbiota, essential for the digestion of arctic flora, which may include a large proportion of lichens during winter. Lichens are rich in plant secondary metabolites, which may affect members of the gut microbial consortium, such as the methane-producing methanogenic archaea. Little is known about the effect of lichen consumption on the rumen and cecum microbiotas and how this may affect methanogenesis in reindeer. Here, we examined the effects of dietary lichens on the reindeer gut microbiota, especially methanogens. Samples from the rumen and cecum were collected from two groups of reindeer, fed either lichens (Ld: n = 4, or a standard pelleted feed (Pd: n = 3. Microbial densities (methanogens, bacteria and protozoa were quantified using quantitative real-time PCR and methanogen and bacterial diversities were determined by 454 pyrosequencing of the 16S rRNA genes. In general, the density of methanogens were not significantly affected (p>0.05 by the intake of lichens. Methanobrevibacter constituted the main archaeal genus (>95% of reads, with Mbr. thaueri CW as the dominant species in both groups of reindeer. Bacteria belonging to the uncharacterized Ruminococcaceae and the genus Prevotella were the dominant phylotypes in the rumen and cecum, in both diets (ranging between 16-38% total sequences. Bacteria belonging to the genus Ruminococcus (3.5% to 0.6%; p = 0.001 and uncharacterized phylotypes within the order Bacteroidales (8.4% to 1.3%; p = 0.027, were significantly decreased in the rumen of lichen-fed reindeer, but not in the cecum (p = 0.2 and p = 0.087, respectively. UniFrac-based analyses showed archaeal and bacterial libraries were significantly different between diets, in both the cecum and the rumen (vegan::Adonis: pseudo-F<0.05. Based upon previous literature, we suggest that the

  19. Phylogeographical analysis of mtDNA data indicates postglacial expansion from multiple glacial refugia in woodland caribou (Rangifer tarandus caribou.

    Directory of Open Access Journals (Sweden)

    Cornelya F C Klütsch

    Full Text Available Glacial refugia considerably shaped the phylogeographical structure of species and may influence intra-specific morphological, genetic, and adaptive differentiation. However, the impact of the Quaternary ice ages on the phylogeographical structure of North American temperate mammalian species is not well-studied. Here, we surveyed ~1600 individuals of the widely distributed woodland caribou (Rangifer tarandus caribou using mtDNA control region sequences to investigate if glacial refugia contributed to the phylogeographical structure in this subspecies. Phylogenetic tree reconstruction, a median-joining network, and mismatch distributions supported postglacial expansions of woodland caribou from three glacial refugia dating back to 13544-22005 years. These three lineages consisted almost exclusively of woodland caribou mtDNA haplotypes, indicating that phylogeographical structure was mainly shaped by postglacial expansions. The putative centres of these lineages are geographically separated; indicating disconnected glacial refugia in the Rocky Mountains, east of the Mississippi, and the Appalachian Mountains. This is in congruence with the fossil record that caribou were distributed in these areas during the Pleistocene. Our results suggest that the last glacial maximum substantially shaped the phylogeographical structure of this large mammalian North American species that will be affected by climatic change. Therefore, the presented results will be essential for future conservation planning in woodland caribou.

  20. An examination of recovery planning for forest-dwelling woodland caribou (Rangifer tarandus caribou in Ontario, Canada

    Directory of Open Access Journals (Sweden)

    Christopher J. A. Wilkinson

    2008-04-01

    Full Text Available Ontario’s population of forest-dwelling woodland caribou is listed both federally and provincially as a species at risk. It is estimated that 20 000 woodland caribou remain in Ontario, of which approximately one quarter inhabit the boreal forest and are described as the sedentary forest-dwelling population. This paper examines the recovery strategy for this population developed by the Ministry of Natural Resources, as well as discussing the implications of provincial forestry policy on woodland caribou management. Commercial timber harvesting will likely soon be allowed in parts of the northern third of the province, in which woodland caribou habitat currently is relatively unimpaired by industrial development. Abstract in Norwegian / Sammendrag:Planlegging for bevaring av skogsøkotypen av Rangifer tarandus caribou i Ontario, CanadaSkogsvillreinen av skogsøkotypen i Ontario er vurdert som sårbar både føderalt og på provinsnivå. Av provinsens rundt 20 000 skogsvillrein hører omtrent en fjerdepart til den stasjonære skogsboende skogsøkoypen. Artikkelen ser på bevaringsstrategien som er utarbeidet av naturressursdepartementet i Ontario for denne spesielle bestanden og diskuterer konsekvensene for villreinen av provinsens skogpolitikk. Kommersiell hogst vil mest sannsynlig og snart bli tillatt i deler av Ontarios nordlige tredel der skogvillreinens leveområder er relativt upåvirket av industriell virksomhet.

  1. Level of selected nutrients in meat, liver, tallow and bone marrow from semi-domesticated reindeer (Rangifer t. tarandus L.

    Directory of Open Access Journals (Sweden)

    Ammar Ali Hassan

    2012-03-01

    Full Text Available Objectives: To acquire new knowledge on the nutritional composition of semi-domesticated reindeer (Rangifer t. tarandus L. and their nutritional value for humans. The results could be useful in updating the Norwegian Food Composition Database, whose current data on reindeer is limited. Study design: Cross-sectional study on population of semi-domesticated reindeer from 2 northern Norwegian counties (Finnmark and Nordland. Methods: Semi-domesticated reindeer carcasses (n=31 were randomly selected, from which meat, liver, tallow and bone marrow samples were collected. Selected vitamins, minerals, fatty acids and total lipids were studied. Results: As expected, reindeer meat was found to be lean (2% total lipid, thus it is a good source of low-fat meat. The meat was also found to be a good source of vitamin B12, docosapentaenoic acid (C22:5 n-3 and α-linolenic acid (C18:3 n-3. Statistically significant differences (p<0.05 in most of the nutrient levels between meat and the rest of the studied reindeer tissues were observed. In most cases, the liver, tallow and bone marrow had higher nutritional values when compared to meat. Liver had the highest concentrations of vitamin A, all vitamin B types, vitamin C, iron, selenium and the total amount of polyunsaturated fatty acids (n-3. Additionally, liver was the only edible tissue that contained vita-mins B9 and C. The vast majority of the vitamin concentrations in liver, tallow and bone marrow were significantly correlated with the concentrations in meat (p<0.05. Conclusions: The studied tissues from reindeer demonstrated that reindeer is a valuable food source that could meet or contribute to the consumers’ nutritional recommended daily allowance (RDA.

  2. Estimating changes in lichen mat volume through time and related effects on barren ground caribou (Rangifer tarandus groenlandicus) movement.

    Science.gov (United States)

    Rickbeil, Gregory J M; Hermosilla, Txomin; Coops, Nicholas C; White, Joanne C; Wulder, Michael A

    2017-01-01

    Lichens form a critical portion of barren ground caribou (Rangifer tarandus groenlandicus) diets, especially during winter months. Here, we assess lichen mat volume across five herd ranges in the Northwest Territories and Nunavut, Canada, using newly developed composite Landsat imagery. The lichen volume estimator (LVE) was adapted for use across 700 000 km2 of barren ground caribou habitat annually from 1984-2012. We subsequently assessed how LVE changed temporally throughout the time series for each pixel using Theil-Sen's slopes, and spatially by assessing whether slope values were centered in local clusters of similar values. Additionally, we assessed how LVE estimates resulted in changes in barren ground caribou movement rates using an extensive telemetry data set from 2006-2011. The Ahiak/Beverly herd had the largest overall increase in LVE (median = 0.033), while the more western herds had the least (median slopes below zero in all cases). LVE slope pixels were arranged in significant clusters across the study area, with the Cape Bathurst, Bathurst, and Bluenose East herds having the most significant clusters of negative slopes (more than 20% of vegetated land in each case). The Ahiak/Beverly and Bluenose West had the most significant positive clusters (16.3% and 18.5% of vegetated land respectively). Barren ground caribou displayed complex reactions to changing lichen conditions depending on season; the majority of detected associations with movement data agreed with current understanding of barren ground caribou foraging behavior (the exception was an increase in movement velocity at high lichen volume estimates in Fall). The temporal assessment of LVE identified areas where shifts in ecological conditions may have resulted in changing lichen mat conditions, while assessing the slope estimates for clustering identified zones beyond the pixel scale where forage conditions may be changing. Lichen volume estimates associated with barren ground caribou

  3. Estimating changes in lichen mat volume through time and related effects on barren ground caribou (Rangifer tarandus groenlandicus) movement

    Science.gov (United States)

    Hermosilla, Txomin; Coops, Nicholas C.; White, Joanne C.; Wulder, Michael A.

    2017-01-01

    Lichens form a critical portion of barren ground caribou (Rangifer tarandus groenlandicus) diets, especially during winter months. Here, we assess lichen mat volume across five herd ranges in the Northwest Territories and Nunavut, Canada, using newly developed composite Landsat imagery. The lichen volume estimator (LVE) was adapted for use across 700 000 km2 of barren ground caribou habitat annually from 1984–2012. We subsequently assessed how LVE changed temporally throughout the time series for each pixel using Theil-Sen’s slopes, and spatially by assessing whether slope values were centered in local clusters of similar values. Additionally, we assessed how LVE estimates resulted in changes in barren ground caribou movement rates using an extensive telemetry data set from 2006–2011. The Ahiak/Beverly herd had the largest overall increase in LVE (median = 0.033), while the more western herds had the least (median slopes below zero in all cases). LVE slope pixels were arranged in significant clusters across the study area, with the Cape Bathurst, Bathurst, and Bluenose East herds having the most significant clusters of negative slopes (more than 20% of vegetated land in each case). The Ahiak/Beverly and Bluenose West had the most significant positive clusters (16.3% and 18.5% of vegetated land respectively). Barren ground caribou displayed complex reactions to changing lichen conditions depending on season; the majority of detected associations with movement data agreed with current understanding of barren ground caribou foraging behavior (the exception was an increase in movement velocity at high lichen volume estimates in Fall). The temporal assessment of LVE identified areas where shifts in ecological conditions may have resulted in changing lichen mat conditions, while assessing the slope estimates for clustering identified zones beyond the pixel scale where forage conditions may be changing. Lichen volume estimates associated with barren ground caribou

  4. Flexible mating tactics and associated reproductive effort during the rutting season in male reindeer (Rangifer tarandus, L. 1758)

    Institute of Scientific and Technical Information of China (English)

    Eliana PINTUS; Stefania UCCHEDDU; Knut H RED; Javier Prez GONZALZ; Juan CARRANZA; Mauri NIEMINEN; ystein HOLAND

    2015-01-01

    Polygynous males can change their mating tactics across their lifetime, but information is scarce on the flexibility of this trait within a given season and the relative costs and benefits of using different tactics. Here, we monitored individually marked male reindeerRangifer tarandus and classified their mating tactics as harem-defense, sneaking, or mixed. The costs of the male reproductive effort were assessed using both direct (i.e. percentage of body mass lost) and indirect measures (i.e. activity patterns such as feeding, standing, and walking), while mating group size and reproductive success were recorded as mating ef-fort benefits. Our results show that reindeer males may switch between the harem-defense and sneaking tactics throughout the same breeding season, providing further support to the notion that reproductive tactics are flexible in ungulates. The costs and benefits of male mating effort vary according to the mating tactic, reaching the highest values in harem-holders and the lowest values in sneaking males. Moreover, males who switched between the sneaking tactic and the harem-defence tactic tended to achieve higher mating success than males who consistently used the least costly tactic. Indeed, all harem-holders successfully sired offspring, whereas only two out of three mixed-tactic males sired one calf, and sneaking males did not sire any calves. In conclusion, our results show that reindeer males can modulate their mating efforts during the same breeding season by switching between the most costly harem-defense tactic and the least costly sneaking tactic, suggesting individual solutions to the balance between reproductive effort and mating opportunities [Current Zoology 61 (5): 802–810, 2015].

  5. Use of length heterogeneity polymerase chain reaction (LH-PCR as non-invasive approach for dietary analysis of Svalbard reindeer, Rangifer tarandus platyrhynchus.

    Directory of Open Access Journals (Sweden)

    Sungbae Joo

    Full Text Available To efficiently investigate the forage preference of Svalbard reindeer (Rangifer tarandus platyrhynchus, we applied length-heterogeneity polymerase chain reaction (LH-PCR based on length differences of internal transcribed spacer (ITS regions of ribosomal RNA (rRNA to fecal samples from R. tarandus platyrhynchus. A length-heterogeneity (LH database was constructed using both collected potential food sources of Svalbard reindeer and fecal samples, followed by PCR, cloning and sequencing. In total, eighteen fecal samples were collected between 2011 and 2012 from 2 geographic regions and 15 samples were successfully amplified by PCR. The LH-PCR analysis detected abundant peaks, 18.6 peaks on an average per sample, ranging from 100 to 500 bp in size and showing distinct patterns associated with both regions and years of sample collection. Principal component analysis (PCA resulted in clustering of 15 fecal samples into 3 groups by the year of collection and region with a statistically significant difference at 99.9% level. The first 2 principal components (PCs explained 71.1% of the total variation among the samples. Through comparison with LH database and identification by cloning and sequencing, lichens (Stereocaulon sp. and Ochrolechia sp. and plant species (Salix polaris and Saxifraga oppositifolia were detected as the food sources that contributed most to the Svalbard reindeer diet. Our results suggest that the use of LH-PCR analysis would be a non-invasive and efficient monitoring tool for characterizing the foraging strategy of Svalbard reindeer. Additionally, combining sequence information would increase its resolving power in identification of foraged diet components.

  6. Observation of Arctic island barren-ground caribou (Rangifer tarandus groenlandicus migratory movement delay due to human induced sea-ice breaking

    Directory of Open Access Journals (Sweden)

    Mathieu Dumond

    2013-06-01

    Full Text Available Normal 0 21 false false false SV X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Normal tabell"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-fareast-language:EN-US;} The seasonal migration of the Dolphin and Union caribou (Rangifer tarandus groenlandicus herd between Victoria Island and the mainland (Nunavut/Northwest Territories, Canada relies on the formation of sea-ice that connects the Island to the mainland from late-October to early-June.  During an aerial survey of the Dolphin and Union caribou herd in October 2007 on southern Victoria Island, Nunavut, Canada, we documented the short-term effects of the artificial maintenance of an open water channel in the sea-ice on caribou migratory movements during staging along the coast.

  7. Effective Field Sampling for Predicting the Spatial Distribution of Reindeer(Rangifer tarandus) with Help of the Gibbs Sampler%借助吉布斯抽样器有效地进行野外抽样预测驯鹿(Rangifer tarandus)的空间分布

    Institute of Scientific and Technical Information of China (English)

    Alex Teterukovskiy; Lars Edenius

    2003-01-01

    我们介绍一种估计驯鹿(Rangifer mrandus)的空间分布的方法。描述野生动物物种分布的数据,其内在的空间自相关性包含可以用来提高野外调查效率的信息。我们的数据包括驯鹿粪便小球数、卫星图像和一个数字化地形模型。基于这些综合数据,我们采用普通逻辑回归、自动逻辑回归和吉布斯抽样器预测驯鹿的空间分布。通过训练数据集.对每种方法所采取的不同抽样设计结果讲行比较.结果表明.

  8. The effect of wildfire and clear-cutting on above-ground biomass, foliar C to N ratios and fiber content throughout succession: Implications for forage quality in woodland caribou (Rangifer tarandus caribou)

    Science.gov (United States)

    Mallon, E. E.; Turetsky, M.; Thompson, I.; Noland, T. L.; Wiebe, P.

    2013-12-01

    Disturbance is known to play an important role in maintaining the productivity and biodiversity of boreal forest ecosystems. Moderate to low frequency disturbance is responsible for regeneration opportunities creating a mosaic of habitats and successional trajectories. However, large-scale deforestation and increasing wildfire frequencies exacerbate habitat loss and influence biogeochemical cycles. This has raised concern about the quality of the under-story vegetation post-disturbance and whether this may impact herbivores, especially those vulnerable to change. Forest-dwelling caribou (Rangifer tarandus caribou) are declining in several regions of Canada and are currently listed as a species at risk by COSEWIC. Predation and landscape alteration are viewed as the two main threats to woodland caribou. This has resulted in caribou utilizing low productivity peatlands as refuge and the impact of this habitat selection on their diet quality is not well understood. Therefore there are two themes in the study, 1) Forage quantity: above-ground biomass and productivity and 2) Forage quality: foliar N and C to N ratios and % fiber. The themes are addressed in three questions: 1) How does forage quantity and quality vary between upland forests and peatlands? 2) How does wildfire affect the availability and nutritional quality of forage items? 3) How does forage quality vary between sites recovering from wildfire versus timber harvest? Research sites were located in the Auden region north of Geraldton, ON. This landscape was chosen because it is known woodland caribou habitat and has thorough wildfire and silviculture data from the past 7 decades. Plant diversity, above-ground biomass, vascular green area and seasonal foliar fiber and C to N ratios were collected across a matrix of sites representing a chronosequence of time since disturbance in upland forests and peatlands. Preliminary findings revealed productivity peaked in early age stands (0-30 yrs) and biomass peaked

  9. 我国驯鹿 Rangifer tarandus 的种群分布、数量及致危原因%Current Distribution,Population Trends and Causes of Decline of Reindeer in China

    Institute of Scientific and Technical Information of China (English)

    曾治; 孟凡露; 王朋; 孟秀祥

    2016-01-01

    2012年7月至2013年8月间,在大兴安岭对我国驯鹿 Rangi f er tarandus开展了野外调查,以确定其分布及种群数量波动,并分析其致危原因.结果表明:我国驯鹿仅分布于大兴安岭西北麓的内蒙古根河地区(E 121°11′-122°25′,N 50°42′-51°50′),其分布区与我国鄂温克族聚居区完全重叠.我国现存驯鹿种群718头,分布于12个彼此隔离的种群,各驯鹿种群数量分布极不均匀,每个种群由9~240头驯鹿组成,大部分种群呈典型小种群状态,其平均种群大小仅为59.83头(±18.42, n=12);驯鹿分布生境的海拔区间为700~926 m ,平均海拔为813.67 m (±21.72 m , n=12);小种群及相关的近交衰退、生境丧失及适宜性下降、管理政策不合理、高强度的生态旅游和盗猎及天敌捕杀是制约我国驯鹿种群发展的主要因素.%The reindeer (Rangifer tarandus) is an endangered species distributed in the sub‐arctic region in the northeastern part of China .To determine the current status of the population and the distribution pat‐terns of reindeer ,this study was conducted in the Great Xing’Anling of China during July 2012 to August 2013 .The results showed that the reindeer in China only occurs in Genhe area of Inner Mongolia (E 121° 11′-122°25′,N 50°42′-51°50′) ,where has been the dwelling region of Ewenki people .There were 718 reindeer in 12 populations in 2013 with the population range from 9 to 240 and the average population size of 59.83 ( ± 18.42 ,n=12) ,which indicated that the most reindeer populations in China were small popula‐tions .The preferred habitats of reindeer locates from 700 to 926 m with the average of 813.67 m (± 21.72 , n=12) .Small populations and the related inbreeding ,habitat loss and degradation ,management policy ,in‐tensive tourism and poaching and the predation have been the main factors influencing the population increase

  10. Linguatula serrata in Swedish reindeer (Rangifer tarandus L

    Directory of Open Access Journals (Sweden)

    Claes Rehbinder

    1982-05-01

    Full Text Available A high prevalence (24,2% of the tongue-worm Lingutula serrata was found in reindeer yearlings. Apparently the high incidence found in this material indicates that the parasite is well adapted to reindeer; the reaction of the nasal mucosa is very mild. The abscence of clinical manifestations and the hidden localization in sinuses which are rarely inspected at slaughter or autopsy is most probably the reason why L. serrata is seldom observed.Tungmask (Linguatula serrata hos svensk skogsren.Abstract in Swedish / Sammandrag: En hög frekvens(24,2% av tungmask (Linguatula serrata påvisades hos årskalv av skogsren. Den ringa våvnadsreaktion som forelag antyder att L serrata troligen ar val anpassad till ren. Att endast ett fåtal rapporter om forekomst av L serrata hos ren foreligger torde bero på att parasiten inte ger några kliniska symptom samt dess i huvudsak gomda lokalisation i overkåkshåligheterna vilka sållan inspekteras vid slakt eller obduktion. L serrata år dårfor sannolikt vanligare hos svenska renar ån man tidigare antagit.

  11. Rutting behavior and androgen variation in reindeer (Rangifer tarandus L.).

    Science.gov (United States)

    Mossing, T; Damber, J E

    1981-03-01

    The rutting behavior of captive reindeer was studied during three rutting seasons. Blood samples from three males were taken for androgen analysis before, during, and afterthe rut. The amount of androgen increased at the end of August to a peak during late September-early October and decreased thereafter. Flehmen, urinating on the hindlegs, and two different low-stretch displays emerged during the prerut period. The preorbital gland enlarged and secretion occurred at the rim of the pocket. A conspicuous breath odor appeared very abruptly during the most intense period of rutting. A few days later a strong odor also appeared in the urine. The urination behavior and the two odors were confined to a brief period during the rut, while other behavior persisted afterwards.

  12. Fatal inanition in reindeer (Rangifer tarandus tarandus: Pathological findings in completely emaciated carcasses

    Directory of Open Access Journals (Sweden)

    Mørk Torill

    2007-09-01

    Full Text Available Abstract Background In a project to determine the causes of winter mortality in reindeer in Finnmark County, northern Norway, the most frequent diagnosis turned out to be complete emaciation, despite several of the reindeer having been given silage for up to 4 weeks before they died. The present paper describes autopsy results and other findings in these animals. Methods Autopsies were made of 32 reindeer carcasses, and 28 of these were diagnosed as completely emaciated based on lack of visible fat and serous atrophy of subepicardial and bone marrow fat. Other investigations of the carcasses included histology, bacteriology, parasitology (counting of macro parasites and faecal egg counting, analysis of vitamin E and selenium in liver, chemical and botanical analysis of rumen content, analysis of lipid content in femur bone marrow and estimation of muscle atrophy by use of a muscle index. Results Main findings were: Low carcass weight, severe muscle atrophy, hemosiderosis in liver and spleen, subcutaneous oedema (18% and effusions to body cavities (18%. Two types of lipofuscin granula were identified in the liver: One type occurred in liver endothelial cells of all carcasses, while the other type occurred in hepatocytes, and prevailed in adult animals. Abomasal haemorrhages, consistent with previously described stress lesions, was present in 68% of the carcasses. Diarrhoea occurred in 2 cases, and loose faecal consistency was associated with silage feeding. Rumen content was low in crude protein. Grass dominated rumen content in silage-fed carcasses, while reindeer on natural pastures had mainly woody plants, mosses and litter in rumen. Stem dominated the grass fraction in rumens with high grass content, indicating ruminal indigestion as a cause of emaciation in silage fed animals. Some cases had heavy infestation of parasites such as warble fly larvae (Hypoderma tarandi, throat bot larvae (Cephenemyiae trompe and lung nematodes. Conclusion Lack of appropriate amounts and/or appropriate quality of feed has been the main cause of emaciation, though heavy infestation of parasites may have contributed to the emaciation in some cases.

  13. Is transport distance correlated with animal welfare and carcass quality of reindeer (Rangifer tarandus tarandus)?

    Science.gov (United States)

    Laaksonen, Sauli; Jokelainen, Pikka; Pusenius, Jyrki; Oksanen, Antti

    2017-03-15

    Slaughter reindeer are exposed to stress caused by gathering, handling, loading and unloading, and by conditions in vehicles during transport. These stress factors can lead to compromised welfare and trauma such as bruises or fractures, aspiration of rumen content, and abnormal odour in carcasses, and causing condemnations in meat inspection and lower meat quality. We investigated the statistical association of slaughter transport distance with these indices using meat inspection data from years 2004-2016, including inspection of 669,738 reindeer originating from Finnish reindeer herding areas. Increased stress and decreased welfare of reindeer, as indicated by higher incidence of carcass condemnation due to bruises or fractures, aspiration of rumen content, or abnormal odour, were positively associated with systems involving shorter transport distances to abattoirs. Significant differences in incidence of condemnations were also detected between abattoirs and reindeer herding cooperatives. This study indicates that in particular the short-distance transports of reindeer merit more attention. While the results suggest that factors associated with long distance transport, such as driver education, truck design, veterinary supervision, and specialist equipment, may be favourable to reducing pre-slaughter stress in reindeer when compared with short distance transport systems, which occur in a variety of vehicle types and may be done by untrained handlers. Further work is required to elucidate the causal factors to the current results.

  14. Remote blood collection in reindeer (Rangifer tarandus tarandus L: a preliminary study

    Directory of Open Access Journals (Sweden)

    E. Wiklund

    1994-12-01

    Full Text Available Automatic blood sampling equipment (ABSE was used successfully to collect blood samples from two reindeer. During blood sampling, two methods of restraint were applied which caused no short term changes in plasma concentrations of urea, aspartate aminotransferase, alanine aminotransferase or total protein. Plasma Cortisol concentrations were significantly elevated by the two restraint techniques. The value of ABSE in studies of stress in reindeer is discussed.

  15. Case report: Malnutrition and undernutrition as cause of mortality in farmed reindeer (Rangifer tarandus tarandus L.

    Directory of Open Access Journals (Sweden)

    Erik O. Ågren

    2000-03-01

    Full Text Available Chronic diarrhoea evolved during the third year of farming in a group of six reindeer farmed in central Sweden. The first death occurred in July, and despite offering supplemental feed, the deaths continued. Within 9 months five animals (83% were dead. The necropsy findings indicated emaciation in all cases. The initially adequate clover vegetation in the paddock had been depleted over the years, leading to malnutrition and undernutrition of reindeer in the summer season.

  16. Macroscopical and microscopical studies of the common bile duct in reindeer (Rangifer tarandus tarandus L

    Directory of Open Access Journals (Sweden)

    Timo Rahko

    1990-08-01

    Full Text Available The histological structure and secretory function of the common bile duct (ductus hepaticus communis has not been previously described in reindeer. Macroscopical studies were thus performed in 25 reindeer to reveal the morphology and topography of the ductus hepaticus communis and adjoining organs. Histologic structure of the common bile duct was investigated in 20 animals. Our studies showed that the ductus hepaticus communis and pancreaticus join about 2 cm before the duodenal opening to form the common duct. The common bile duct is an elastic tube about 3 to 5 cm long and 2 to 3 mm thick partly surrounded by fat and pancreatic tissues. The wall of the duct, being about 1 mm thick by light microscopy, consisted of folded mucosa surrounded by connective tissue fibres and a serosal layer. Distally, also muscular bands were seen. In some areas separate leucocytes and even lymphatic nodules were present. Surprisingly pancreatic acini occurred in certain areas of the wall, even in close contact to subepithelial tissues. Mucosal epithelium consisted of surface and glandular epithelial cells with mucous secretion. Numerous intraepithelial globule leucocytes were identifiable within the lamina epithelialis.Tutkimus yhteisen sappikäytävän rakenteesta porolla.Abstract in Finnish / Yhteenveto: Yhteisen sappikäytävän (ductus hepaticus communis histologista rakennetta ja eritystoimintaa ei ole aikaisemmin kuvattu porolla. Makroskooppisia tutkimuksia suoritettiin 25 porolla yhteisen sappikäytävän rakenteen ja topografian selvittämiseksi. Seinämän histologinen rakenne selvitettiin 20 porolla. Tutkimukset osoittivat, että porolla ductus hepaticus communis ja ductus pancreaticus yhtyvät noin 2 cm ennen ohutsuolta muodostaakseen yhteisen tiehyeen. Ductus hepaticus communis on noin 3-5 cm pitkä ja 2-3 mm:n läpimittainen käytävä. Se on elastinen ja osit-tain rasva- ja haimakudoksen ympäröimä. Seinämä on mikroskooppisesti noin 1 mm paksu. Sisäosan muodostaa poimuuntunut limakalvo. Limakalvoa ympäröivät sidekudossäikeet ja serosa, sappikäytävän loppuosassa myös lihassäikeistö. Seinämässä havaittiin yksittäisiä valkosoluja ja imusolukasautumia. Poikkeuksellisena anatomisena piirteenä voidaan pitää haimasaarekkeiden esiintymistä sappikäytäväseinämän kudoksissa jopa läheisessä kosketuksessa pintaepiteeliin. Limakalvon epiteelikudos on sekä pinta- että rauhassolukkoa, joka erittää limaa. Epiteelissä tunnistettiin lukuisia kerässoluja huolimatta siitä, että poroille oli suoritettu loishäätö edellisenä syksynä.Studier av gallgången (ductus hepaticus communis hos ren.Abstract in Swedish / Sammandrag: Den gemensamma gallgångens histologi och sekretoriska funktion hos renen har inte tidigare beskrivits. För att klarlägga den makroskopiska byggnaden och topografin av den gemensamma gallgången (ductus hepaticus communis undersöktes dessa i 25 renar. Väggen i 20 gallgånger granskades histologiskt. Undersökningarna visade att ductus pancreaticus mynnar ut i ductus hepaticus communis bildande en gemensam utforselgång till duodenum. Ductus hepaticus communis är c. 2-3 mm i diameter och 3-5 cm lång. Den elastiska gangens vägg är c. 1 mm tjock delvis omgiven av fett- och pankreasvävnad. Gangens vägg består av serosa, bindvävsfibrer och nära mynningen ses muskelfibrer. Insidan av gången är beklädd med en veckad slemhinna. Lymfatisk vävnad och enstaka lymfocyter observeras. Anmärkningsvärt är att pankreasvävnad förekommer i gallgångens vägg och under slemhinnan. Slemhinnans epitel består av yt- och körtelepitel som avsöndrar slem. De globulära leukocyterna var talrika i epitelet trots att renarna avmaskats på hösten.

  17. Pestivirus and alphaherpesvirus infections in Swedish reindeer (Rangifer tarandus tarandus L.).

    Science.gov (United States)

    Kautto, Arja H; Alenius, Stefan; Mossing, Torgny; Becher, Paul; Belák, Sándor; Larska, Magdalena

    2012-04-23

    Herding semi-domesticated reindeer has economic and social value for Sami people in the northern territories of Fennoscandia. However, with the intensification of reindeer husbandry, interspecies transmission of pathogens between reindeer and domestic animals may become a problem, especially for countries such as Sweden, Norway, and Finland where pestivirus and alphaherpesvirus have been eradicated in domestic ruminants. This study, which included 1158 Swedish reindeer, showed relatively high prevalence of antibodies against bovine viral diarrhoea virus (BVDV) (32%) and bovine herpesvirus-1 (BoHV-1) (53%). Adult animals were more often seropositive for BVDV and BoHV-1 (50% and 78%, respectively) than were calves (18 and 11%, respectively). While the seroprevalence of alphaherpesvirus was similar in different herding districts, pestivirus seropositivity was highest in the South and diminished towards the North of the Swedish reindeer herding area. High correlation of the seropositivity against both pathogens at both individual and herd levels may indicate possible mutual synergetic effects and may be explained by the immunosuppressive nature of the viruses. While alphaherpesvirus seroprevalence was probably related to putative cervid herpesvirus 2 (CvHV-2), the pestivirus infecting reindeer remains undefined. The virus neutralisation test of reindeer sera using different pestivirus strains, revealed higher titres against Border disease virus strains like 137/4 (BDV-1) and Reindeer-1 (BDV-2) than against BVDV-1. However, the virus was not identified by real time RT-PCR in any of the samples (n=276) from seronegative reindeers. The study showed that pestivirus and alphaherpesvirus infections are endemic in the Swedish reindeer population. Copyright © 2011 Elsevier B.V. All rights reserved.

  18. A hypothesis to explain lichen-Rangifer dynamic relationships

    Directory of Open Access Journals (Sweden)

    Eldar Gaare

    1997-04-01

    Full Text Available A small group of fruticous lichen species, viz. Cetraria nivalis, Cladonia mitis, C. stellaris, and Stereocaulon paschale forms extensive mats in the most winter habitats of Rangifer tarandus populations in Norway. The plant communities accessible for grazing are often found on easily drained, moraine ridges. These lichen species are perennial, lying on the ground while growing slowly at the top. As they decompose they add humus to the top of the soil profile. The lichen mats catch all water from small showers, thus preventing vascular plants from obtaining a more regular water supply. Grazing removs whole plants and gradually makes larger and larger holes in the lichen mats. Wind and water erode the humus, with only coarse gravel remaining. This diminishes the soil water storage capacity. Without grazing, lichens will gradually build a humus layer, which would improve the soil water storage capacity. In time vascular plants then would take the place of the lichens. I propose the hypothesis that by (over-grazing Rangifer improve their winter pastures by making conditions more favourable for lichens than for vascular plants.The fact that lichens are more scarce on habitats with more and regular precipitation, 1 in more oceanic climates, 2 on soils with more silt, and 3 on bird perches with thick peat due to regular fertilising, support this hypothesis.

  19. Feeding soy or fish meal to Alaskan reindeer (Rangifer tarandus tarandus – effects on animal performance and meat quality

    Directory of Open Access Journals (Sweden)

    Greg Finstad

    2009-01-01

    Full Text Available Fourteen reindeer (8 steers and 6 females were used to compare the effects of two different reindeer diets (a feed mix based on barley, brome hay and soybean meal (SBM or fishmeal (WFM as protein source on animal growth performance, feed conversion efficiency and ultimate meat quality. Samples from free-ranging reindeer (n=4; 2 steers and 2 females on the Seward Peninsula were included to provide comparisons with the traditional reindeer meat produced in Alaska. No significant difference was observed in overall weight gain between the WFM and SBM animals or between females and steers; however, the feed conversion efficiency was significantly higher for the reindeer fed the WFM mix. Carcass dressing percentage from the SBM group was higher compared with the WFM animals. No differences were found in live weight, carcass characteristics, meat pH, temperature decline, shear force, meat color or cooking loss when comparing the treatment groups. The meat samples (M. longissimus from the free-range group had the highest amount of omega-3 fatty acids and also the highest amount of polyunsaturated fatty acids (PUFA. Meat from the animals fed SBM was significantly higher in triglyceride content and lower in phospholipid content compared with the two other groups. No significant differences were found when the trained panel compared the sensory attributes of the meat. Off-flavor attributes related to “wild’ or “gamey” flavor was reported by consumers for samples from the WFM and free-range reindeer (15 and 24 per cent of the consumers, respectively. No “fish-related” flavor was reported. In conclusion, no negative effects in either animal performance or meat quality characteristics by using fish meal as opposed to soybean meal as a protein supplement in a milled reindeer diet were found.Abstract in Swedish / Sammandrag:Utfordring av ren med soja- eller fiskmjøl – effekter på tillväxt, foderutnyttjande och köttkvalitet I vår undersökning ingick 14 renar (8 kastrerade sarvar (härkaroch 6 vajor för att jämföra effekter av två olika renfoder (baserade på korn, hö och soja- (SBM eller fiskmjöl (WFM som proteintillskott med avseende på tillväxt, foderutnyttjande och köttkvalitet. Köttprover från naturbetande renar (n=4; 2 härkar och 2 vajor från Seward Peninsula inkluderades i studien för att representera kvaliteten på traditionellt producerat renkött från Alaska. Inga signifikanta skillnader i tillväxt observerades, varken mellan SBM- och WFM-grupperna eller mellan härkar och vajor. Foderutnyttjandet var dock signifikant bättre hos WFM-renarna. Slaktutbytet var högst för renarna i SBM-gruppen, däremot rapporterades inga skillnader i levandevikt, slaktkroppsegenskaper, pH-värde och temperatur i ytterfilén, skärmotstånd, färg eller vattenhållande förmåga i köttet när de tre grupperna av renar jämfördes (SBM, WFM och naturbetande djur. Köttet från de naturbetande renarna hade det signifikant högsta innehållet av både omega-3-fettsyror och av fleromättade fettsyror. Kött från SBM-renarna hade det högsta innehållet av triglycerider och det lägsta innehållet av fosfolipider jämfört med de andra två grupperna. Den tränade smakpanelen kunde inte hitta några skillnader i sensoriska egenskaper hos köttet från renarna i de tre olika grupperna. I en konsumentundersökning rapporterades kommentarer om olika ”vilt-relaterade” bismaker i kött från naturbetande renar (24% av konsumenterna och från WFM-gruppen (15% av konsumenterna, men inga ”fisk-liknande” bismaker i köttet kunde påvisas. Att byta ut sojamjöl mot fiskmjöl som proteintillskott i renfoder hade inga negativa effekter på renarnas tillväxt, foderutnyttjande eller på renköttets kvalitet.

  20. High female mortality resulting in herd collapse in free-ranging domesticated reindeer (Rangifer tarandus tarandus in Sweden.

    Directory of Open Access Journals (Sweden)

    Birgitta Åhman

    Full Text Available Reindeer herding in Sweden is a form of pastoralism practised by the indigenous Sámi population. The economy is mainly based on meat production. Herd size is generally regulated by harvest in order not to overuse grazing ranges and keep a productive herd. Nonetheless, herd growth and room for harvest is currently small in many areas. Negative herd growth and low harvest rate were observed in one of two herds in a reindeer herding community in Central Sweden. The herds (A and B used the same ranges from April until the autumn gathering in October-December, but were separated on different ranges over winter. Analyses of capture-recapture for 723 adult female reindeer over five years (2007-2012 revealed high annual losses (7.1% and 18.4%, for herd A and B respectively. A continuing decline in the total reindeer number in herd B demonstrated an inability to maintain the herd size in spite of a very small harvest. An estimated breakpoint for when herd size cannot be kept stable confirmed that the observed female mortality rate in herd B represented a state of herd collapse. Lower calving success in herd B compared to A indicated differences in winter foraging conditions. However, we found only minor differences in animal body condition between the herds in autumn. We found no evidence that a lower autumn body mass generally increased the risk for a female of dying from one autumn to the next. We conclude that the prime driver of the on-going collapse of herd B is not high animal density or poor body condition. Accidents or disease seem unlikely as major causes of mortality. Predation, primarily by lynx and wolverine, appears to be the most plausible reason for the high female mortality and state of collapse in the studied reindeer herding community.

  1. Impacts of introduced Rangifer on ecosystem processes of maritime tundra on subarctic islands

    Science.gov (United States)

    Ricca, Mark; Miles, A. Keith; Van Vuren, Dirk H.; Eviner, Valerie T.

    2016-01-01

    Introductions of mammalian herbivores to remote islands without predators provide a natural experiment to ask how temporal and spatial variation in herbivory intensity alter feedbacks between plant and soil processes. We investigated ecosystem effects resulting from introductions of Rangifer tarandus (hereafter “Rangifer”) to native mammalian predator- and herbivore-free islands in the Aleutian archipelago of Alaska. We hypothesized that the maritime tundra of these islands would experience either: (1) accelerated ecosystem processes mediated by positive feedbacks between increased graminoid production and rapid nitrogen cycling; or (2) decelerated processes mediated by herbivory that stimulated shrub domination and lowered soil fertility. We measured summer plant and soil properties across three islands representing a chronosequence of elapsed time post-Rangifer introduction (Atka: ~100 yr; Adak: ~50; Kagalaska: ~0), with distinct stages of irruptive population dynamics of Rangifer nested within each island (Atka: irruption, K-overshoot, decline, K-re-equilibration; Adak: irruption, K-overshoot; Kagalaska: initial introduction). We also measured Rangifer spatial use within islands (indexed by pellet group counts) to determine how ecosystem processes responded to spatial variation in herbivory. Vegetation community response to herbivory varied with temporal and spatial scale. When comparing temporal effects using the island chronosequence, increased time since herbivore introduction led to more graminoids and fewer dwarf-shrubs, lichens, and mosses. Slow-growingCladonia lichens that are highly preferred winter forage were decimated on both long-termRangifer-occupied islands. In addition, linear relations between more concentrated Rangifer spatial use and reductions in graminoid and forb biomass within islands added spatial heterogeneity to long-term patterns identified by the chronosequence. These results support, in part, the hypothesis that Rangifer

  2. Elaphostrongylus spp. from Scandinavian cervidae - a scanning electron microscope study (SEM

    Directory of Open Access Journals (Sweden)

    Margareta Stéen

    1990-08-01

    Full Text Available Nematodes of the genus Elaphostrongylus collected from moose (Alces alces L., reindeer (Rangifer tarandus tarandus L., and red deer (Cervus elaphus L., respectively, were studied by means of scanning electron microscopy. Morphological differences in the ribs of the genital bursa were demonstrated. The Elaphostrongylus species from reindeer and red deer differed from each other in four ribs of the genital bursa. These results agree with the morphological characters of E. cervi and E. rangiferi described by Cameron (1931 and Mitskevitch (1960. The genital bursa of Elaphostrongylus sp. from moose, in accordance with the description of E. alces by Steen et al. (1989 showed characteristics differing from those found in Elaphostrongylus spp. from reindeer and red deer respectively. These results support the hypothesis that there are three separate species of Elaphostrongylus present in Scandinavian Cervidae. Svep-elektroniska studier på Elaphostrongylus spp. hos skandinaviska hjortdjur.Abstract in Swedish / Sammandrag: Rundmaskar inom slaktet Elaphostrongylus funna hos alg (Alces alces L., ren (Rangifer tarandus tarandus L. och kronhjort(Cervus elaphus L. studerades med hjalp av svepelelektronmikroskop. De hanliga bursorna med sin a stodjeribbor uppvisade variationer i utseende, langd och placering mellan dessa rundmaskar. De arter av Elaphostrongylus funna hos ren och kronhjort skilde sig åt avseende fyra stodjeribbor på de hanliga bursorna. Dessa resultat stammer val overens med de karaktarer som tidigare ar beskrivna av Cameron(1931 och av Mitskevich (1960. Den hanliga bursan hos arten Elaphostrongylus funnen hos alg, vilken tidigare ar beskriven av Steen et al. (1989, visade upp ett utseende som skilde sig från bursorna hos de Elaphostrongylus-arter funna hos ren och kronhjort. Dessa resultat stoder hypotesen om tre skilda arter av Elaphostrongylus hos skandinaviska hjortdjur.

  3. The nitrogen window for arctic herbivores: plant phenology and protein gain of migratory caribou (Rangifer tarandus)

    Science.gov (United States)

    Barboza, Perry S.; Van Someren, Lindsay L.; Gustine, David D.; Bret-Harte, M. Syndonia

    2018-01-01

    Terrestrial plants are often limited by nitrogen (N) in arctic systems, but constraints of N supply on herbivores are typically considered secondary to those of energy. We tested the hypothesis that forage N is more limiting than energy for arctic caribou by collecting key forages (three species of graminoids, three species of woody browse, and one genus of forb) over three summers in the migratory range of the Central Arctic Herd in Alaska from the Brooks Range to the Coastal Plain on the Arctic Ocean. We combined in vitro digestion and detergent extraction to measure fiber, digestible energy, and usable fractions of N in forages (n = 771). Digestible energy content fell below the minimum threshold value of 9 kJ/g for one single forage group: graminoids, and only beyond 64–75 d from parturition (6 June), whereas all forages fell below the minimum threshold value for digestible N (1% of dry matter) before female caribou would have weaned their calves at 100 d from parturition. The window for digestible N was shortest for browse, which fell below 1% at 30–41 d from parturition, whereas digestible N contents of graminoids were adequate until 46–57 d from parturition. The low quality of browse as a source of N was also apparent from concentrations of available N (i.e., the N not bound to fiber) that were distribution and growth of the population.

  4. Genetic variation in meat production related traits in reindeer (Rangifer t. tarandus

    Directory of Open Access Journals (Sweden)

    Kirsi Muuttoranta

    2014-02-01

    Full Text Available Normal 0 21 false false false SV X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Normal tabell"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-fareast-language:EN-US;} In reindeer husbandry, animal breeding could offer tools for improving productivity by selection. The traits affecting meat production efficiency are primarily related to calf growth and survival, and to dam’s longevity and lifetime ability to raise heavy calves. Information on genetic (covariation in these traits is scarce but needed in estimating the potential and effectiveness of selection as well as biological constraints. The objectives of the study were to estimate these genetic parameters from the data of an experimental reindeer herd at Kutuharju (Inari, Finland. Heritabilities (h2 and genetic correlations (rg among the average daily gain of calves (ADG, dams’ age at maturity, individual fitness (λind and the cumulative sum of her calves’ weaning weight over seven years (WW7 were studied with AS-Reml software using the dataset from the experimental herd. The pedigree included also sire information to allow the separation of the maternal effects. Direct and maternal heritabilities of ADG were moderate (0.24±0.09 and 0.18±0.05, respectively and the direct-maternal correlation was highly negative (-0.73±0.17. Indeed, selection on growth necessitates information on both calf and dam. The genetic correlation of growth with birth date and birth weight could not be detected with the data. The age at maturity and λind had a small heritable component (0.07±0.12 and 0.10±0.06, respectively, whereas the heritability value of WW7 was 0.23±0.07. Reindeer herders’ empirical selection on calf’s autumn weight favours fast growth (rg between growth and autumn weight = 0.35±0.24. Dam’s weight in her first autumn was strongly correlated with her lifetime production expressed by her individual fitness (rg = 0.71±0.23 and the cumulative sum of her calves’ weaning weight (rg = 0.63±0.12. Hence, the early information on the dam (her weight in her first autumn or her first calf’s autumn weight works as useful selection criteria for the traits related to lifetime production.

  5. National recovery strategy for woodland caribou (Rangifer tarandus caribou, boreal population, in Canada

    Directory of Open Access Journals (Sweden)

    Dave Hervieux

    2007-04-01

    Full Text Available Recovery planning for the boreal population of woodland caribou is a complex task, spanning eight Canadian provinces and territories. To accommodate unique situations across the country, recovery planning for this Species at Risk Act-listed threatened species is occurring at both provincial/ territorial and national levels. The national recovery strategy strives to identify nationally important issues and provide direction for provinces and territories as they plan and implement boreal caribou recovery within their jurisdictions. The national vision is to conserve and recover boreal caribou and their habitat across Canada. Specific goals are to: 1 Prevent extirpation of local boreal caribou populations from all existing caribou ranges; and 2 Maintain or enhance local boreal caribou populations at or to self-sustaining levels within all existing caribou ranges; and 3 Maintain or enhance boreal caribou habitat to support self-sustaining local populations. Nineteen broad national approaches are identified. These approaches include items relating to: habitat planning and management, caribou population monitoring and management, management of human-caused mortality, management of other wildlife species, consideration of government legislation and policy,promotion of stewardship and public outreach, and research. Specific outcomes are provided for each stated recovery approach. For more information on Canada's national recovery strategy for the boreal population of woodland caribou please see www.speciesatrisk.gc.ca/recovery/default_e.cfm

  6. Macro-microscopic research in reideer (Rangifer tarandus hoof suitable for efficient locomotion on complex grounds

    Directory of Open Access Journals (Sweden)

    Zhang Rui

    2017-06-01

    Full Text Available Introduction: Reindeer are adapted to long distance migration. This species can cope with variations in substrate, especially in ice and snow environment. However, few detailed studies about reindeer hoof are available. Thus this article describes the results of studies on macro- and micro-structures of reindeer hoof.

  7. Effect of "owners" selection strategies on autumn weight in reindeer (Rangifer t. tarandus calves

    Directory of Open Access Journals (Sweden)

    Robert B. Weladji

    2002-03-01

    Full Text Available Many northern indigenous peoples, including the Sami are dependent on reindeer herding for their livelihood. In view of the socio-cultural and economical importance of reindeer herding, emphasis should be put on appropriate herd structure and selection strategies that maximise marketable products, such as meat (the primary marketable product nowadays. Empirical observations reveal that within a herd, some owners seem to have better productivity in term of carcass autumn weight of calves, than others. We hypothesized that there may be an "owner" effect in reindeer herding, i.e. some owners may be applying particular selection strategies that might be beneficial. We investigated this in three reindeer grazing districts in South Norway, using mixed linear models. We found that autumn carcass weight of calves varied significantly with year and "owner" within herd in all three districts. Consistently some particular owners within a herd had higher average autumn carcass weight of their calves than others. We attributed this difference to "individual selection strategies", meaning that some owners may follow more accurately the sex, age and weight-based recommended strategy and in addition, they may make superior choices when selecting animals for slaughtering. We conclude that individual owners have the capability, through appropriate selection decisions to improve the average annual autumn weight of their reindeer calves. This might be an important aspect of "Traditional Ecological Knowledge", in addition to the recommended modern sex, age and weight-based selection criteria.

  8. The method by which Cephenemyia trompe (Modeer larvae invade reindeer (Rangifer tarandus

    Directory of Open Access Journals (Sweden)

    John R. Anderson

    1990-09-01

    Full Text Available Laboratory electrostimulated C. trompe (Modeer females forcefully expelled (sprayed larvae for 5-20 cm. The watery spray consisted of about 20 tiny droplets containing two to several larvae. Crawling first-instar larvae exhibited negative geotactic and phototropic responses; they were subject to rapid desiccation and became immobile as the tiny droplets dried within a few seconds. When 5-50 larvae from dissectedfemales were dropped in physiological saline onto different areas of the muzzle of restrained reindeer, only larvae placed deep within the nostrils and on the lips crawled out-of-sight down the nostril passage or into the mouth. Drops of larvae placed elsewhere quickly desiccated and the larvae became immobile. Larvae deposited by wild females onto a COz-baited reindeer model with the muzzle, lips and nostrils coated with insect trapping adhesive all were stuck only along the dorsal lip below the philtrum. All experimental evidence supports a natural per os mode of invasion.

  9. Accuracy of the tritium water dilution method for determining water flux in reindeer (Rangifer tarandus)

    Energy Technology Data Exchange (ETDEWEB)

    Cameron, R D; White, R G; Luick, J R

    1976-06-01

    The accuracy of the tritium water dilution method in estimating water flux was evaluated in reindeer under various conditions of temperature and diet. Two non-pregnant female reindeer were restrained in metabolism stalls, within controlled-environment chambers, at temperatures of +10, -5, and -20/sup 0/C; varying amounts of a commercial pelleted ration (crude protein, 13 percent) or mixed lichens (crude protein, 3 percent) were offered, and water was provided ad libitum either as snow or in liquid form. Total body water volume and water turnover were estimated using tritiated water, and the daily outputs of feces and urine were measured for each of 12 different combinations of diet and temperature. Statistical analysis of the data showed that the tritium water dilution technique gives accurate determinations of total body water flux over a wide range of environmental and nutritional conditions.

  10. The nitrogen window for arctic herbivores: plant phenology and protein gain of migratory caribou (Rangifer tarandus)

    Science.gov (United States)

    Barboza, Perry S.; Van Someren, Lindsay L.; Gustine, David D.; Bret-Harte, M. Syndonia

    2018-01-01

    Terrestrial plants are often limited by nitrogen (N) in arctic systems, but constraints of N supply on herbivores are typically considered secondary to those of energy. We tested the hypothesis that forage N is more limiting than energy for arctic caribou by collecting key forages (three species of graminoids, three species of woody browse, and one genus of forb) over three summers in the migratory range of the Central Arctic Herd in Alaska from the Brooks Range to the Coastal Plain on the Arctic Ocean. We combined in vitro digestion and detergent extraction to measure fiber, digestible energy, and usable fractions of N in forages (n = 771). Digestible energy content fell below the minimum threshold value of 9 kJ/g for one single forage group: graminoids, and only beyond 64–75 d from parturition (6 June), whereas all forages fell below the minimum threshold value for digestible N (1% of dry matter) before female caribou would have weaned their calves at 100 d from parturition. The window for digestible N was shortest for browse, which fell below 1% at 30–41 d from parturition, whereas digestible N contents of graminoids were adequate until 46–57 d from parturition. The low quality of browse as a source of N was also apparent from concentrations of available N (i.e., the N not bound to fiber) that were <1% at 72–80 d from parturition. The Coastal Plain may be favored by female caribou because available and digestible concentrations of N are not only greater than those on the Brooks Range, the window of usable N on the Coastal Plain extends the period of protein gain for females and their calves by 17 d. Conversely, inland areas with greater biomass and densities of digestible N than the Coastal Plain may be more favorable for large male caribou that begin gaining protein from spring to breed in autumn. Our study provides evidence that phenological windows for protein gain in caribou are both spatially and temporally dynamic and likely to affect the distribution and growth of the population.

  11. The Scandinavian Reindeer (Rangifer tarandus L.) after the last glacial maximum: time, seasonality and human exploitation

    DEFF Research Database (Denmark)

    Petersen, Erik Brinch; Aaris Sørensen, Kim; Mühldorff, Rudi

    2006-01-01

    in the area with ca. 1300 14C yr. Thus the first occurrence is pushed back to ca. 12 500 14C yr BP (late Bølling chronozone) while the youngest date lies at ca. 9200 14C yr BP (late Preboreal chronozone) establishing that the reindeer survives well into the Holocene. The seasonal dates of the reindeer...

  12. Seasonal variations in general activity, behaviour and cutaneous glandular structures in reindeer (Rangifer tarandus L.)

    OpenAIRE

    Mossing, Torgny

    1980-01-01

    The locomotor activity of the reindeer is separated into a diurnal and a nocturnal phase which, in turn, consists of a  number of short-term activity bursts. The onset and termination  of diurnal and nocturnal activity are largely in synchrony  with sunrise and sunset. Since the diurnal phase is  longer, total activity is dependent on the photoperiod. Total  activity as well as the number of activity bursts is greater  in Jùne with continuous daylight than in December with 6  hours daylight. ...

  13. Reindeer (Rangifer tarandus response to feces and urine from sheep (Ovis aries and reindeer

    Directory of Open Access Journals (Sweden)

    Stein R. Moe

    1999-04-01

    Full Text Available In many Norwegian alpine and tundra areas sheep and reindeer graze sympatrically. Areas covered with dung or urine may have consequences for reindeer pasture utilization. Experiments were conducted on 5 stall fed male reindeer calves where animals were individually presenred with two troughs (experimental and control containing 200 g of concentrate. Fresh and dry sheep and reindeer pellets (50 g wet weight were mixed with the concentrate in the experimental trough and the aversive response was tested against the control. Both fresh sheep (P < 0.0001 and reindeer (P < 0.0001 pellets were associated with aversive response by reindeer. A similar response was found for dry sheep (P = 0.006 and dry reindeer (P = 0.0009 pellets. Similar trials were conducted using sheep and reindeer urine (20 g sprayed evenly on the food and the aversive response by reindeer was tested against the control (sprayed with 20 g of water. Both sheep and reindeer urine stimulated an aversive response by reindeer {P = 0.03 for both tests. The differences in the aversive response of reindeer ro fresh sheep and reindeer pellets, dry sheep and reindeer pellets and sheep and reindeer urine were also tested. No differences by reindeer were found between sheep and reindeer pellets, either for fresh (P = 0.28 or dry (P = 0.07, or between food treated with sheep and reindeer urine (P = 0.28. Possible habituation to sheep and reindeer pellets was tested using 8 consecutive trials with dry pellets, followed by 2 additional trials when dry pellets were soaked in water. This was done to simulate natural dry periods followed by rain showers. Habituation effects were found in trials with dry sheep and reindeer pellets. Subsequent trials with fecal pellets soaked in water significantly reduced food intake when compared with the last habituation trial with dry pellets (P < 0.05.

  14. Effect of calf stimulation on milk ejection in reindeer (Rangifer tarandus

    Directory of Open Access Journals (Sweden)

    Hallvard Gjøstein

    2004-04-01

    Full Text Available The objective of this study was to establish methods for stimulating the milk ejection in reindeer kept for milking purpose. Calves were used to stimulate milk does’ let down. In experiment 1, five does were allowed olfactory, acoustic and visual contact with their calves during milking, whereas four does were milked in isolation. The treatment of the groups was alternated every day during the eight days experiment. Olfactory, acoustic and visual contact with the calf did not influence the doe’s milk yield. The milk yield varied significantly between individual females within treatment (P < 0.01. In experiment 2, the calves were allowed to suckle their mother for a short period (two seconds prior to milking being initiated. The same alternate design as in experiment 1 with groups consisting of three and two animals respectively was used, and the experiment lasted four days. The pre-suckling stimulation significantly increased the milk ejection measured as milk yield (P < 0.05, and the residual milk after the treatment was negectible. Moreover, the milk ejection varied between individual females within treatment (P < 0.05. We conclude that it is possible to achieve a complete milk removal by machine milking after the does have been pre-stimulated by suckling of calves. Olfactory, acoustic and visual contact with calves during milking failed to influence the milk ejection in this study. However, the results have to be interpreted with caution due to limited sample size.Abstract in Norwegian / Sammendrag: Formålet med dette forsøket var å prøve ut ulike metoder for å stimulere nedgivninga av melk hos rein. Kalvene ble tatt i bruk for å stimulere nedgivninga. I forsøk 1 hadde simla lyd-, lukt og synskontakt med kalven mens melkingen pågikk. Vi benyttet et ”switch back design” der fem simler hadde kontakt med kalven under melkingen og fire ble melket uten kontakt. Behandlingen ble byttet om annenhver dag i de åtte dagene forsøket varte. Lyd-, lukt og synskontakt med kalven under melking hadde ingen innvirkning på melkemengden ved maskinmelking. Det var imidlertid individuell variasjon i hvor mye melk man oppnådde hos simlene (P < 0.01. I forsøk 2 lot vi kalvene suge simlene en kort stund før simlene ble melket. Kalven ble sluppet inn til simla og sugingen ble avbrutt etter to sekunder. Deretter ble simla ført inn for maskinmelking. Forsøket varte i fire dager og vi benyttet samme ”switch back design” som i forsøk 1, med grupper bestående av henholdsvis to og tre dyr. Stimuleringa med suging hadde en signifikant innvirkning på nedgivninga. (P < 0.05, og mengden gjenværende melk var minimal. Dessuten var det en signifikant individuell variasjon i melkemengden innen behandlingen (P < 0.05. Vi konkluderer med at det er mulig å oppnå en fullstendig tømming av juret ved maskinmelking dersom simlene først er blitt stimulert med suging av kalven. Lyd-, lukt- og synskontakt med kalven under melking hadde ingen innvirkning på nedgivninga av melk i dette forsøket. Resultatene må imidlertid tolkes med varsomhet siden det statistiske utvalget er begrenset.

  15. Delineating demographic units of woodland caribou (Rangifer tarandus caribou in Ontario: cautions and insights

    Directory of Open Access Journals (Sweden)

    Jennifer L. Shuter

    2012-03-01

    Full Text Available Delineating demographic structure across an organism’s range can reveal the extent to which population dynamics in different geographic areas are driven by local or external factors and can be crucial for effective conservation and management. Obtaining optimal data for such analyses can be time and resource-intensive and impending development and resource extraction pressures may necessitate the examination of existing data, even when they are less than ideal. We analyzed a historic telemetry dataset containing satellite radio-collar locations of 73 forest-dwelling woodland caribou in northern Ontario to determine demographic structure. We applied several clustering methods (i.e., agglomerative, divisive and fuzzy k-means to median seasonal locations. Results were used to distinguish demographic units and minimum convex polygons and fixed-kernel density estimates were used to delineate unit boundaries and core areas. For areas where sampling was considered representative of the distribution of caribou on the landscape, we assessed demographic distinctness by evaluating intra-individual variation in cluster membership, membership strength and distance between boundaries and core areas of adjacent units. The number and composition of clusters identified was similar among methods and caribou were grouped into 6 general clusters. The distinctions between the three clusters identified in the central portion of the province (i.e., Lac Seul, Wabakimi, Geraldton and the two clusters identified in the eastern portion of the province (i.e., Cochrane and Cochrane-Quebec were determined to represent demographic structuring. Additional distinctions in other areas (i.e., between The Red Lake and Lac Seul clusters in the west and between the central and eastern clusters may just be artifacts of the original sampling effort. Amongst demographic units, there was no evidence of individual flexibility in cluster membership and average membership strength was very high. There was little to no overlap between boundaries and core areas of adjacent units, but distances between adjacent unit boundaries were relatively low. Additional sampling effort is needed to further delineate demographic structure in Ontario caribou.

  16. Clarification of some api characteristics in relation to caribou (Rangifer tarandus

    Directory of Open Access Journals (Sweden)

    William O. Pruitt, Jr.

    1990-09-01

    Full Text Available A total of 2177 comparisons of api hardness vs. density in northern Saskatchewan, southeastern Manitoba and northeastern Finland revealed no consistent correlation (r varied from +.70 to -.17. A total of 1395 comparisons of horizontal hardness of the top layer of api to vertical hardness of the same layer of api in southeastern Manitoba, northeastern Finland and far eastern middle Finland revealed no consistent correlation (r varied from +.99 to -.20. Therefore one cannot substitute density for hardness nor horizontal hardness of the top layer for vertical hardness of the top layer in the terms of the Värriö Snow Index.

  17. The influence of stress on substrate utilization in skeletal muscle fibres of reindeer (Rangifer tarandus L

    Directory of Open Access Journals (Sweden)

    B. Essén-Gustavsson

    1984-05-01

    Full Text Available Moderate stress in connection with handling, sampling and herding of reindeer caused a very pronounced depletion of glycogen in mainly type IIA and IIB fibres. Also intramuscular triglyceride levels decreased but mainly in type I fibres. Muscle lactate levéls increased in all animals but not to the levels found in pigs exposed to stress or exertion. Reindeer muscles appeared to have a great capacity to oxidize both carbohydrates and lipids. All animals showed increased Cortisol, urea and AS AT values. A marked depletion of glycogen and lipids in many of the fibres may be a factor involved in the development of skeletal muscle degeneration in connection with mental stress and exertion as there seems to be a correlation between high ASAT values and substrate depleted musclefibres. A connection may therefore exist between high instramuscular substrate stores and the ability of a muscle to tolerate stress.Av stress påverkat substratutnyttjande i skelettmuskelfibrer hos renAbstract in Swedish / Sammanfattning: Måttlig stress betingad av hantering, provtagning och drivning av ren orsakade en mycket kraftig minskning av muskelglykogen i fråmst typ IIA och typ IIB fibrer. Aven triglycerider minskade framfor allt i typ I fibrer. Muskellaktatnivåerna okade i samtliga undersokta djur, men inte till nivåer som ses hos gris utsatta for stress eller fysisk anstrångning.Renens muskler uppvisade en mycket hog kapacitet att oxidera, forbranna, både kolhydrat och fett. Alla djur uppvisade forhojda Cortisol, urea och ASAT varden. Den mycket kraftiga tomningen av kolhydrat och fett i många muskelfibrer kan vara en faktor medverkande till muskeldegeneration i samband med mental stress och anstrangning då hoga ASAT-vården synes vara korrelerade till uttomda muskelfibrer. Ett samband mellan hog instramuskulår substratupplagring och formåga att tåla stress kan således foreligga.Stressin vaikuttaneen poron substraattihyvåk-sikåytto luurangon lihaksiston kuiduissa.Abstract in Finnish / Yhteenveto: Kohtuullinen stressi edellyttåen kåsittelyå, kokeenottoa ja poronajoa aiheutti hyvin voimakkaan lihasglykogeenin våhentymisen etenkin II A ja II B tyyppisisså fiibereisså. Myoskin triglyseriidit våhentyivåt kaikissa tutkituissa elåimissa, muttei kuitenkaan niihin tasoihin asti kuin sijoissa, jotka ovat joutuneet alttiiksi stressiin tai fyysilliseen rasitukseen. porojen lihakset osoittivat hyvin korkeaa kapasiteettia sekå hiilihydraatin ettå rasvan palamiseen. Kaikki elåimet osoittivat kohonnutta cortisoolin, urean ja ASATin arvoa. Hyvin voimakas hiilihydraatin ja rasvan tyhjentyminen monissa lihaskuiduissa voi olla vaikutin lihasrappeutumiseen henkisen stressin ja rasituksen yhteydesså, jolloin korkea ASAT-arvo nåyttåå olevan vastaavuussuhteessa tyhjentyneisiin lihaskuituihin. Lihaksiston korkean substraattivarastoimisin ja stressin sietokyvyn suhde voi siis olla olemassa.

  18. A remarkable collection of Late Pleistocene reindeer (Rangifer tarandus) remains from Woerden (The Netherlands)

    NARCIS (Netherlands)

    van Kolfschoten, Thijs; van der Jagt, Inge; Beeren, Zoe; Argiti, Vasiliki; van der Leije, Judith; van Essen, Hans; Busschers, Freek S.; Stoel, Pieter; van der Plicht, Hans

    2011-01-01

    Woerden, in the central part of The Netherlands, is a locality where the amateur-archaeologist Pieter Stoel collected several thousands of fossil mammalian remains of Pleistocene age. The stratigraphically-mixed assemblage includes a broad variety of taxa including species that are indicative of

  19. Variations in mountain vegetation use by reindeer (Rangifer tarandus) affects dry heath but not grass heath

    NARCIS (Netherlands)

    Moen, J.; Boogerd, C.; Skarin, A.

    2009-01-01

    Question: Are differences in landscape use of semi-domesticated reindeer reflected in the vegetation of summer grazing grounds? Location: Alpine heaths, central east Sweden. Methods: Dry heath and grass heath vegetation plots with inferred grazing intensities (high, intermediate and low) were

  20. Comparative ecological and behavioral adaptations of Ovibos moschatus and Rangifer tarandus

    Directory of Open Access Journals (Sweden)

    David R. Klein

    1992-10-01

    Full Text Available Caribou/reindeer and muskoxen are the only two ungulate species that have successfully occupied arctic tundra habitats. Although confronted with similar environmental constraints, their morphological dissimilarities have enabled them to develop unique behavioral and ecological adaptations that under most circumstances result in minimal overlap in use of forage resources. The large body and gut capacity of muskoxen have enabled them to adopt a strategy maximizing rate of forage intake and energy conservation, whereas caribou/reindeer of substantially smaller body size must pursue selective feeding, requiring high mobility and high energy expenditure. Responses to predators and insects by the two species show similar contrasts in associated energy costs. When confronted with environmental extremes that limit forage availability, competition for food may occur and the resulting differential success is a reflection of their divergent evolutionary routes.

  1. Population genetics of the native caribou (Rangifer tarandus groenlandicus) and the semi-domestic reindeer (Rangifer tarandus tarandus) in Southwestern Greenland: evidence of introgression

    DEFF Research Database (Denmark)

    Jepsen, B.I.; Siegismund, Hans Redlef; Fredholm, Merete

    2002-01-01

    . Although the reindeer and caribou were initially kept separated, mixing has occurred since the 1970's. We investigated the genotypic structure of caribou and reindeer in South-west Greenland, using five polymorphic microsatellite markers isolated from cattle, sheep, goat and red deer. A total of ninety...

  2. Sensory meat quality, ultimate pH values, blood metabolites and carcass parametersin reindeer (Rangifer tarandus tarandus L. fed various diets

    Directory of Open Access Journals (Sweden)

    Eva Wiklund

    2000-03-01

    Full Text Available This investigation was made to study and compare the effects of different diets on sensory meat quality and ultimate pH values in reindeer muscles and to relate stress-induced blood metabolites and carcass parameters to the meat quality traits measured. Altogether 23 female reindeer calves were included in the study. During an adaptation period, all reindeer were allowed free access to a mimicked natural diet containing 80% lichens (lichen diet. On January 28, 8 reindeer (group Cjan were slaughtered. Five reindeer (group C.Mar were allowed continuous free access to the lichen diet throughout the experiment. During 8 days, the other reindeer (groups PL and PS were given the lichen diet, half of the amount offered to the control group, and were then starved for one day. Thereafter, these reindeer were fed 80% commercial reindeer feed (pellets and either 20% lichens (group PL, or 20% silage (group PS for 5 weeks. After this, all animals were slaughtered. The average carcass weight and dressing percentage in the group fed commercial reindeer feed and lichens (PL were higher than in group CMar- Fat registrations were generally higher in groups PL and PS than in the groups Cj2n and CMar- Ultimate pH values in M. triceps brachii and M. longissimus were significantly lower in the group CMST than in PL. The levels of all blood metabolites (urea, ASAT and Cortisol were generally higher in groups PL and PS than in groups Cja„ and CMEF- NO significant differences were found in any of sensory attributes of the meat (monitored according to ISO standards. The present study shows that muscle and fat depots in reindeer can be improved by feeding a diet based on reindeer pellets but suggests that a feeding period of 35 days might be too short to affect the sensory properties of reindeer meat.

  3. Influence of production system, age an sex on carcass parameters and some biochemical meat quality characteristics of reindeer (Rangifer tarandus tarandus L.

    Directory of Open Access Journals (Sweden)

    Sabine Sampels

    2005-03-01

    Full Text Available Carcass composition in reindeer is affected by feed intake and the age and sex of the animal. Studies have also shown that age, sex, carcass trim fat content and total intramuscular fat content (IMF influence lipid class composition. The aim of this study was to compare lipid class composition and IMF in relation to carcass weight, conformation and trim fat content, and to investigate how these parameters are affected by age, sex and different feed sources. Five groups of reindeer were studied. Two groups of calves were fed two grain-based pelleted feeds with different lipid compositions for approximately two months before slaughter. One of these groups was fed with conventional pellets, and the other with pellets enriched with linseed cake to increase the amount of n-3 fatty acids in the diet. Three groups of grazing reindeer were also included in the study, consisting of adult males, adult females or calves. Reindeer calves fed pellets had higher slaughter weights, higher trim fat content and better carcass conformation scores compared to the grazing calves. However, there was no significant difference in IMF between pellet-fed and grazing calves. Adult female reindeer had the highest and grazing calves the lowest slaughter weights, trim fat and IMF. There was no difference in lipid class composition in meat from calves fed with the two pelleted feeds, whereas grazing calves had a higher amount of phospholipids. Squalene was identified and quantified as a component of intramuscular lipids in reindeer meat. Effekt av produktionssystem, ålder och kön på slaktkroppskvalitet och några biokemiska egenskaper hos renköttAbstract in Swedish / Sammandrag: Slaktkroppssammansättningen hos renar påverkas av både foderintag, fodersammansättning och djurens ålder och kön. Tidigare har vi visat att renens kön, ålder, mängden intramuskulärt fett (IMF och putsfett på slaktkroppen påverkar sammansättningen av lipidklasser. Syftet med denna studie var att jämföra lipidklassammansättningen och IMF i relation till slaktkroppens vikt, form och mängden putsfett och att undersöka hur dessa parametrar påverkas av renarnas kön, ålder och olika typer av foder (bete och pellets. Fem grupper renar ingick i studien (totalt 38 djur. Två grupper kalvar utfodrades med två sorters pellets med olika fettsammansättning under två månader före slakt. Den ena gruppen fick normala pellets (CPD (Renfor Bas medan den andra gruppen fick pellets som hade en tillsats av linfrökaka (LPD för att öka mängden n-3 fettsyror i fodret. Dessutom ingick tre grupper betesdjur i studien: vajor, sarvar och kalvar. Utfodring med pellets gav slaktkroppar med bättre klassning, högre slaktvikter och mer putsfett jämfört med slaktkroppar från betande kalvar. Vajorna hade de högsta och betande kalvar de lägsta slaktvikterna, minst putsfett och lägst halt av IMF. Utfodringen med pellets gav ingen signifikant skillnad i IMF mellan betande och utfodrade renkalvar. Vi fann ingen skillnad i lipidklassammansättning mellan de två utfodrade kalvgrupperna, men köttet från de betande kalvarna hade en högre halt av fosfolipider. Vi kunde också identifiera och kvantifiera squalen som en komponent i intramuskulärt fett i renkött.

  4. Does connectivity exist for remnant boreal caribou (Rangifer tarandus caribou along the Lake Superior Coastal Range? Options for landscape restoration

    Directory of Open Access Journals (Sweden)

    Christine C. Drake

    2018-01-01

    Full Text Available Genetic analysis can provide important information on the dynamic and spatial structure of groups of animals or populations. Little is known of the genetic population structure of caribou that inhabit the Lake Superior Coastal Range (LSCR and the level of gene flow between individuals within the range and beyond. From a landscape perspective, this range is spatially isolated and genetic connectivity within the range is presumed limited due to large water crossings on Lake Superior. This study aims to answer if animal movement can be discerned, using genetic population and relatedness analyses, within and beyond the LSCR. Faecal and hair samples collected between 2005 and 2015 in Pukaskwa National Park were analyzed for genetic markers and compared to 131 unique genotypes previously obtained from both within the LSCR and in the two next closest ranges. Animals from one nearshore island (i.e. Otter were more closely associated with offshore islands than other mainland caribou, likely a result of past movement and translocation rather than ongoing movement. Conversely, on another nearshore island (i.e. Pic, individuals assigned to a different genetic cluster and were related to animals further north outside the range, demonstrating some connectivity through the discontinuous distribution to the coast. Long-term population declines have been observed in the LSCR range despite genetic connectivity within the range and relatively low total habitat disturbance. Restoring connectivity of the LSCR so that it is not isolated from populations to the north is required for the recovery of the mainland portion of the coastal range. These genetic analyses provide some insights on where movements may occur and where landscape restoration efforts may best be directed to enhance connectivity.

  5. Genetic diversity and population genetic structure of the only population of Aoluguya Reindeer (Rangifer tarandus) in China.

    Science.gov (United States)

    Ju, Yan; Liu, Huamiao; Rong, Min; Zhang, Ranran; Dong, Yimeng; Zhou, Yongna; Xing, Xiumei

    2018-04-16

    Aoluguya Reindeer is the only reindeer species in China and currently approximately 1000 Aoluguya Reindeer remain semi-domesticated. A relative low diversity estimate was found by investigating genetic variability and demographic history of its population. Mismatch distribution curve of its nucleotide sequences and neutral test indicate its population has not experienced expansion. Genetic diversity and population structure were also analysed by using its mtDNA and microsatellites technology. Statistical results of these analyses showed there were varying degrees of population inbreeding and suggested that gene flow existed among its populations at one time. Three mutation models were also used to detect the bottleneck effect of reindeer population. The genetic variation of eight populations is relatively small. In addition, the clustering program STRUCTURE was used to analyse Aoluguya Reindeer population structure, to determine its optimal K and first time to analyse the phylogenetic status of Aoluguya Reindeer among other reindeer subspecies. It is recommended that the government establish a natural conservation area in Aoluguya Reindeer growing geography, forbade the trade and hunting of Aoluguya Reindeer, and strengthen the protection of this endangered species.

  6. Productivity factors of the Finnish semi-domesticated reindeer (Rangifer t.tarandus stock during the 1990s

    Directory of Open Access Journals (Sweden)

    Jouko Kumpula

    2002-06-01

    Full Text Available Intensive reindeer grazing and the increase of other land use forms have caused a decline in the amount of arboreal (Alectoria, Bryoria spp. and reindeer (Cladina spp. lichens in the Finnish reindeer management area during the last few decades. Supplementary feeding of reindeer has increasingly compensated for the lack of natural winter fodder. The amount of the supplementary feeding and the quantity and quality of summer pastures should therefore have an increasing effect on the productivity of reindeer stock. In order to outline better the present carrying capacity problems on pastures in the Finnish reindeer management area we focused some of the most important productivity factors of Finnish reindeer stock from 1993 to 1999. The results showed that the productivity of reindeer stock in Finland was dependent especially on two main elements: amount of reindeer feeding and reindeer densities on summer pastures. Winter pastures had no clear effect on productivity when analysing the entire management area. High productivity figures in reindeer stock (calf production, carcass mass and meat production per reindeer were reached in the management districts where winter feeding was the most abundant, reindeer densities relatively low and summer pastures abundant. An increase in reindeer density on summer pastures raised meat production per total summer pasture area but decreased carcass mass of reindeer calves and meat production per reindeer. It seems that the fundamental factor for keeping the reindeer stock productivity sustainable at a high enough level is to optimize the longterm reindeer densities on pastures. Summer pastures may gradually become a limiting factor for reindeer stock productivity in some areas if overgrazed and decreased winter pastures are only compensated for by winter feeding of reindeer. 

  7. Insulin-like growth factor 1 and growth seasonality in reindeer (Rangifer tarandus - comparisons with temperate and tropical cervids

    Directory of Open Access Journals (Sweden)

    J. M. Suttie

    1993-12-01

    Full Text Available Growth in temperate and arctic deer is seasonal, with higher growth rates in spring and summer while growth rates are low or negative in autumn and winter. We have measured IGF1 concentrations in the plasma of reindeer calves exposed to a manipulated photoperiod, indoors, of either 16 hours light followed by 8 hours dark each day (16L:8D (n = 3 or 8L:16D (n = 3 from about the autumnal to the vernal equinox, to determine whether the seasonal growth spurt normally seen in spring is associated with changes in the circulating level of IGF1. A high quality concentrate diet was available ad libitum. The animals were weighed, and bled every 2 weeks and plasma samples assayed for IGF1 by radioimmunoassay. 6-8 weeks after the start of the study those calves exposed to 16L.-8D showed a significant increase in plasma IGF1 concentration which was maintained until the close of the experiment, 24 weeks after the start. In contrast IGF1 plasma concentrations in those calves exposed to a daylength of 8L:16D did not significantly alter during the study. The elevated IFG1 in the 16L:8D group was associated with rapid weight gain compared with the 8L:16D group. We have shown that the seasonal growth spurt is preceded by an elevation in plasma IFG1 concentration. Further, this elevation in IGF1 is daylength dependent. For comparison IGF1 and growth rate seasonal profiles from temperate and tropical deer are included. This comparison reveals that seasonal increases in IGF1 take place only in animals with a seasonal growth spurt. Thus IGF1 plasma level elevations seem most closely associated with the resumption of rapid growth in spring following the winter.

  8. Methods for estimating the density of Elaphostrongylus rangiferi Mitskevich (Nematoda, Metastrongyloidea larvae in faeces from reindeer, Rangifer tarandus L.

    Directory of Open Access Journals (Sweden)

    Odd Halvorsen

    1983-05-01

    Full Text Available A method for estimating the density of Elaphostrongylus rangiferi larvae in reindeer faeces that have been deep frozen is described. The method involves the use of an inverted microscope with plankton counting chambers. Statistical data on the efficiency and sensitivity of the method are given. With fresh faeces, the results obtained with the method were not significantly different from those obtained with the Baermann technique. With faeces that had been stored in deep freeze, the method detected on average 30 per cent more larvae than the Baermann technique.Metoder for å estimere tettheten av hjernemarklarver i avføring fra reinsdyr.Abstract in Norwegian / Sammendrag: En metode for å estimere tettheten av hjernemarklarver i avføring som har vært dypfryst blir beskrevet. Anvendelse av et invertert mikroskop med plankton tellekammer inngår i metoden. Det blir gitt statistiske data for metodens effektivitet og følsomhet. Ved undersøkelse av fersk avføring skilte ikke de resultatene metoden ga seg fra de som ble oppnådd med Baermanns metode. Ved undersøkelse av avføring som hadde vært lagret dypfrosset ga metoden i gjennomsnitt 30 prosent flere larver enn Baermanns metode.

  9. Size and composition of the wild reindeer Rangifer tarandus platyrhynchus population in the Southeast Svalbard Nature Reserve

    NARCIS (Netherlands)

    Alendal, Einar; Bie, Steven de; van Wieren, S.E.

    1979-01-01

    In the summer of 1977 we studied the reindeer population on the islands Barentsøya and Edgeøya in the eastern part of the Svalbard archipelago. A total of 1374 reindeer were observed: 326 animals in the western parts of Barentsøya and 1048 animals on Edgeøya. Considering those parts of Edgeøya which

  10. Morphological keys to advance the understanding of protostrongylid biodiversity in caribou (Rangifer spp. at high latitudes

    Directory of Open Access Journals (Sweden)

    Pratap Kafle

    2017-12-01

    Full Text Available The Protostrongylidae is a diverse family of nematodes capable of causing significant respiratory and neuromuscular disease in their ungulate and lagomorph hosts. Establishing the species diversity and abundance of the protostrongylid fauna has been hindered because the first stage larvae, commonly referred as dorsal spined larvae (DSL, that are shed in the feces are morphologically very similar among several genera. We aimed to determine the protostrongylid diversity and distribution in caribou (Rangifer tarandus groenlandicus and R. t. pearyi in the central and high Canadian Arctic. We first developed, tested and validated a morphological diagnostic guide for the DSL of two important protostrongylids, Parelaphostrongylus andersoni and Varestrongylus eleguneniensis, and then applied this guide to determine the prevalence and intensity of infection of these parasites in fecal samples from 242 caribou. We found that DSL of V. eleguneniensis and P. andersoni can be differentiated morphologically based on the structural differences at the caudal extremity. The presentation and morphology of the dorsal spine, and caudoventral bulging at the start of the tail extension were identified as the key identifying features. The two species were found in caribou on the arctic mainland and southern Victoria Island in single and co-infections, but the prevalence and intensity of infection was low. No protostrongylids were detected in caribou from the high arctic islands. Through this study, we provide a simple, efficient, and robust method to distinguish the DSL of the two protostrongylids, and present the current status of infection in different herds of caribou of the central Canadian Arctic. We report new geographic and host records for P. andersoni infection in Dolphin and Union caribou herd. Keywords: Parelaphostrongylus andersoni, Varestrongylus eleguneniensis, Diagnostic parasitology, Morphological diagnosis, Dorsal spined larvae, Canadian Arctic

  11. Rangifer 1981 Vol. 1 (1: 1-56

    Directory of Open Access Journals (Sweden)

    Sven Skjenneberg (ed.

    1981-05-01

    Full Text Available The first issue/volume of Rangifer was published in autumn 1981 and contained six articles, two of them in English. Besides the scientific contributions, the publication included information about the mandates of the Nordic Council for Reindeer Research (NOR and Rangifer. The aims of the journal were to give reindeer researchers possibilities for "high speed" publishing and to create a link between the researchers and the management/reindeer husbandry advisors to the best of the reindeer industry. Therefore abstracts were provided in several languages.

  12. Selected Vitamins and Essential Elements in Meat from Semi-Domesticated Reindeer (Rangifer tarandus tarandus L.) in Mid- and Northern Norway: Geographical Variations and Effect of Animal Population Density

    Science.gov (United States)

    Hassan, Ammar Ali; Sandanger, Torkjel M.; Brustad, Magritt

    2012-01-01

    Meat samples (n = 100) were collected from semi-domesticated reindeer originating from 10 grazing districts in Norway. We aimed at studying concentrations, correlations, geographical variations and the effect of animal population density on vitamins A, B3, B7, B12 and E, and calcium, iron, zinc, selenium, chromium and cobalt. Mean concentrations of vitamins A, B3, B7; B12 and E were Vitamin E and selenium were the nutrients that exhibited the largest geographical variations (p vitamin B12 with zinc (r = 0.35, p vitamin B12, iron, zinc and selenium concentrations when compared to Norwegian beef, lamb, mutton, pork and chicken meat. PMID:22852060

  13. Selected vitamins and essential elements in meat from semi-domesticated reindeer (Rangifer tarandus tarandus L.) in mid- and northern Norway: geographical variations and effect of animal population density.

    Science.gov (United States)

    Hassan, Ammar Ali; Sandanger, Torkjel M; Brustad, Magritt

    2012-07-01

    Meat samples (n = 100) were collected from semi-domesticated reindeer originating from 10 grazing districts in Norway. We aimed at studying concentrations, correlations, geographical variations and the effect of animal population density on vitamins A, B3, B7, B12 and E, and calcium, iron, zinc, selenium, chromium and cobalt. Mean concentrations of vitamins A, B3, B7; B12 and E were Vitamin E and selenium were the nutrients that exhibited the largest geographical variations (p vitamin B12 with zinc (r = 0.35, p vitamin B12, iron, zinc and selenium concentrations when compared to Norwegian beef, lamb, mutton, pork and chicken meat.

  14. Estimation of biodiversity and population structure of Russian reindeer (Rangifer tarandus breeds inhabiting Northeastern Siberia (Republic of Sakha - Yakutia using microsatellite markers

    Directory of Open Access Journals (Sweden)

    Veronika Ruslanovna Kharzinova

    2016-09-01

    Full Text Available Three semi-domesticated reindeer breeds inhabiting the Republic of Sakha – Yakutia have been characterized using nine microsatellite markers. Genomic DNA was isolated from tissue samples of 123 individuals of the Chukotka (Khargin (CHU, n=47, the Evenk (EVK, n=32 and the Even (EVN, n=44 breeds, collected from different regions of Yakutia. Fragment analysis and sizing were run on ABI 3131xl genetic analyzer. Allele frequencies were calculated and used for the characterization of reindeer breeds and the evaluation of their genetic biodiversity. Nei’s standard genetic distance was calculated and used for the construction of a neighbor-joining tree. Statistical analysis was conducted with GenAIEx 6.5.1, PAST2.15 and STRUCTURE2.3.4 software. The highest number of alleles, such as informative (with a frequency more than 5%, effective (Ne and private (Pr, was detected in the CHU breed: Na≥5%=5.333±0.441, Ne=4.517±0393 and Pr =1.111±0.389, while the EVN breed had the lowest number: 4.778±0.324, 4.315±0.488 and 0.444±0.242, respectively. The EVN breed occupied an intermediate position (5.000±0.373, 4.408±0.315 and 0.889±0.261. Among reindeer breeds, observed heterozygosity ranged from 0.729 ± 0.026 to 0.608±0.050 with the lowest value found in CHU reindeer and the highest in EVK reindeer. A heterozygotes’ deficiency was observed in all reindeer breeds. At K=3, STRUCTURE analysis matches with the data of Nei's genetic distance dimension results, indicating the presence of a common consistent pattern. CHU and EVK reindeer breeds are characterized by a closer genetic relationship in comparison with the EVN breed, which formed a separate cluster.

  15. A study of nutritional status of Finnish reindeer (Rangifer Tarandus L. in differents months: I. Composition and volume of the rumen microbiota

    Directory of Open Access Journals (Sweden)

    Liisa Syrjälä

    1973-12-01

    Full Text Available The rumen microbiota were studied in free-ranging semi-domestic reindeer in Finnish Lapland under the nutritional conditions obtaining at two different sampling times. Qualitative and quantitative investigations were made of the rumen ciliate fauna and quantitative investigations of the rumen bacterial flora. The volume coefficients for rumen ciliates obtained by Westerling (1970 and that for rumen bacteria obtained by Warner (1962 were used to obtain an indication of the volume of the rumen microbe mass in reindeer. The rumen samples were collected in connection with the round-up and slaughter of reindeer, being taken from 30 animals in December and 29 animals in March. The reindeer slaughtered in December had normal access to food, but those slaughtered in March had grazed on better pastures and received a supplementary feed of hay. The total number of ciliate cells was over six times as high in March as in December, the numbers being 1 182900 and 188 300 per ml rumen contents, respectively. The corresponding total numbers of bacterial cells were 9.65 x 109 in March and 6.65 x 109 in December. The reason for the statistically significantly (P < 0.01 higher numbers in March than in December is probably the better nutritional conditions of the herd slaughtered in March, not the time of the year. The ciliate fauna consisted of 19 different species, although not all the species were found in every sample. The percentage composition of the ciliate fauna did not vary considerably between the two sampling times. The volume of the total microbe mass constituted 8.2% of the rumen contents in March and 1.9 % in December, the average being 5.1 %. The proportion of the ciliate volume in the total microbe mass was clearly higher than that of the bacteria at both sampling times: 7.2 times as high in March and 1.7 times in December, the average being 4.7 times.

  16. Assessing risk of mercury exposure and nutritional benefits of consumption of caribou (Rangifer tarandus) in the Vuntut Gwitchin First Nation community of Old Crow, Yukon, Canada.

    Science.gov (United States)

    Schuster, Roseanne C; Gamberg, Mary; Dickson, Cindy; Chan, Hing Man

    2011-08-01

    The contamination of traditional foods with chemical pollutants is a challenge to the food security of Aboriginal Peoples. Mercury levels are generally low in terrestrial animals; however renal mercury levels have been shown to change over time in the Porcupine Caribou Herd, the principal food source for the Vuntut Gwitchin First Nation of Old Crow in Yukon, Canada. Seventy-five Porcupine Caribou muscle, sixty-three kidney and three liver samples were analyzed for total mercury. Average concentrations were 0.003, 0.360 and 0.120mg/kg wet weight total mercury for muscle, kidney and liver, respectively. Consumption data of caribou muscle, kidney and liver were collected from twenty-six adults in Vuntut Gwitchin households. Women of child-bearing age (n=5) consumed a median of 71.5g/person/day of caribou muscle and 0.0g/person/day kidney but consumed no liver; median consumptions for all other adults (women aged 40+ and all men, n=21) were 75.8, 3.2 and 2.5g/person/day for meat, kidney and liver, respectively. Median dietary exposures to total mercury from caribou tissues were estimated to be 0.138μg/kg body weight for women of child-bearing age and 0.223μg/kg body weight for other adults. Caribou tissues were found to contribute high levels of important nutrients to the diet and pose minimal health risk from mercury exposure. Copyright © 2011 Elsevier Inc. All rights reserved.

  17. Anatomic Observation of Nose,Pharynx and Throat of Chinese Reindeers(Rangifer Tarandus)%中国驯鹿鼻、咽、喉的解剖学观察

    Institute of Scientific and Technical Information of China (English)

    刘为民; 乔灵; 都格尔斯仁; 杨银凤; 嘎拉扎布; 额尔德木图

    2001-01-01

    采用大体解剖学的方法对驯鹿上呼吸道的形态结构进行了观察,结果如下:驯鹿鼻部较长,鼻翼内有内、外鼻翼软骨.固有鼻腔发达,每侧鼻腔内含一大的下鼻甲和一小的上鼻甲.鼻泪管开口于鼻前庭腹外侧壁.咽部的软腭长而厚,鼻咽部的后壁上形成咽隐窝,内含一杯状粘膜褶.喉前庭深陷,会厌大而弹性较弱,喉室平坦,不形成喉小囊,但具有喉中室,位于喉前庭底壁上,环状软骨板宽.

  18. Report: Tamreinen på Grønland

    Directory of Open Access Journals (Sweden)

    Sven Skjenneberg

    1982-05-01

    Full Text Available Larsen, P. & Aastrup, P. 1981: Undersøgelser over tamrenbestanden (Rangifer tarandus tarandus L. ved Itivnera, Vestgrønland. - Viltundersøgelser, Hæfte 35. Viltbiologisk Station, Kalø, DK-8410 Rønde.

  19. Electronics

    Science.gov (United States)

    2001-01-01

    International Acer Incorporated, Hsin Chu, Taiwan Aerospace Industrial Development Corporation, Taichung, Taiwan American Institute of Taiwan, Taipei, Taiwan...Singapore and Malaysia .5 - 4 - The largest market for semiconductor products is the high technology consumer electronics industry that consumes up...Singapore, and Malaysia . A new semiconductor facility costs around $3 billion to build and takes about two years to become operational

  20. Winter habitat selection by caribou in relation to lichen abundance, wildfires, grazing, and landscape characteristics in northwest Alaska

    Science.gov (United States)

    Kyle Joly; F. Stuart III Chapin; David R. Klein

    2010-01-01

    Lichens are an important winter forage for large, migratory herds of caribou (Rangifer tarandus granti) that can influence population dynamics through effects on body condition and in turn calf recruitment and survival. We investigated the vegetative and physiographic characteristics of winter range of the Western Arctic Herd in northwest Alaska, one...

  1. Campylobacter hyointestinalis subsp hyointestinalis, a common Campylobacter species in reindeer

    DEFF Research Database (Denmark)

    Hanninen, M.L.; Sarelli, L.; Sukura, A.

    2002-01-01

    (PFGE). Methods and Results: The material, collected during the slaughter period in autumn 1998, comprised 399 faecal contents from the reindeer (Rangifer tarandus), a semi-domesticated, meat-producing ruminant of northern Finland. These samples came from 16 herds in the areas of eight reindeer...

  2. Goose droppings as food for reindeer

    NARCIS (Netherlands)

    van der Wal, R; Loonen, MJJE

    Feeding conditions for Svalbard reindeer, Rangifer tarandus platyrhynchus, on Spitsbergen are generally poor, owing to low availability of forage. We report on coprophagy: the use of goose faeces as an alternative food source for reindeer. Fresh droppings from Barnacle Geese, Branta leucopsis,

  3. Electronics and electronic systems

    CERN Document Server

    Olsen, George H

    1987-01-01

    Electronics and Electronic Systems explores the significant developments in the field of electronics and electronic devices. This book is organized into three parts encompassing 11 chapters that discuss the fundamental circuit theory and the principles of analog and digital electronics. This book deals first with the passive components of electronic systems, such as resistors, capacitors, and inductors. These topics are followed by a discussion on the analysis of electronic circuits, which involves three ways, namely, the actual circuit, graphical techniques, and rule of thumb. The remaining p

  4. Environmental Impact Analysis Process. Draft Environmental Impact Statement Proposed Alaskan Radar System Over-the-Horizon Backscatter Radar Program

    Science.gov (United States)

    1986-08-01

    Mustela vison wolverine Gulo Kulo river otter Lutra canadensis lynx Lynx canadensis moose Alces alces caribou Rangifer tarandus Dall’s sheep Ovic dalli...tissue respiratory chain function at a power density of 5 mW/cm2 . It is unlikely that such effects would be detectable at the power densities at ground...Vulves vulpes black bear Ursus americanus grizzly bear Ursus arctos marten Martes americana ermine Mustela erminea least weasel Mustela nivalis mink

  5. Geographic pattern of serum antibody prevalence for Brucella spp. in caribou, grizzly bears, and wolves from Alaska, 1975-1998.

    Science.gov (United States)

    Zarnke, Randall L; Ver Hoef, Jay M; DeLong, Robert A

    2006-07-01

    Blood samples were collected from 2,635 caribou (Rangifer tarandus), 1,238 grizzly bears (Ursus arctos), and 930 wolves (Canis lupus) from throughout mainland Alaska during 1975-98. Sera were tested for evidence of exposure to Brucella spp. Serum antibody prevalences were highest in the northwestern region of the state. In any specific area, antibody prevalences for caribou and wolves were of a similar magnitude, whereas antibody prevalence for bears in these same areas were two to three times higher.

  6. Herbivore grazing—or trampling? Trampling effects by a large ungulate in cold high- latitude ecosystems

    OpenAIRE

    Heggenes, Jan; Odland, Arvid; Chevalier, Tomas; Ahlberg, Jörgen; Berg, Amanda; Larsson, Håkan; Bjerketvedt, Dag Kjartan

    2017-01-01

    Mammalian herbivores have important top-down effects on ecological processes and landscapes by generating vegetation changes through grazing and trampling. For free-ranging herbivores on large landscapes, trampling is an important ecological factor. However, whereas grazing is widely studied, low-intensity trampling is rarely studied and quantified. The cold-adapted northern tundra reindeer (Rangifer tarandus) is a wide-ranging keystone herbivore in large open alpine and Arctic ecosystems. Re...

  7. Herbivore grazing?or trampling? Trampling effects by a large ungulate in cold high?latitude ecosystems

    OpenAIRE

    Heggenes, Jan; Odland, Arvid; Chevalier, Tomas; Ahlberg, J?rgen; Berg, Amanda; Larsson, H?kan; Bjerketvedt, Dag K.

    2017-01-01

    Mammalian herbivores have important top-down effects on ecological processes and landscapes by generating vegetation changes through grazing and trampling. For free-ranging herbivores on large landscapes, trampling is an important ecological factor. However, whereas grazing is widely studied, low-intensity trampling is rarely studied and quantified. The cold-adapted northern tundra reindeer (Rangifer tarandus) is a wide-ranging keystone herbivore in large open alpine and Arctic ecosystems. Re...

  8. Fertility in female reindeer: the effects of nutrition and growth

    OpenAIRE

    N. J.C. Tyler

    1987-01-01

    Pregnancy rates in juvenile reindeer (Rangifer tarandus) vary considerably both within and between flocks. This potentially has considerable economic significance for reindeer husbandry. This paper discusses the influence of nutrition and growth on fertility in female reindeer using examples taken from the literature. Fertility in reindeer is related to body weight, like in many other mammals, but the relationship is not invariant. Weight-specific pregnancy rates appear to be density dependen...

  9. Wild reindeer of the Kamchatka Peninsula - past, present, and future

    Directory of Open Access Journals (Sweden)

    Vladimir Mosolov

    1996-01-01

    Full Text Available A unique subspecies of wild reindeer (Rangifer tarandus phylarchus Hollister that is endemic to the Kamchatka Peninsula has been declining in number since the 1950s due to commercial hunting, increasing industrial development and competition with domestic reindeer. The largest remaining herd of wild reindeer occurs in the Kronotsky Reserve in northeastern Kamchatka, and the reserve is now critical to the preservation of this subspecies of reindeer.

  10. Predation rate by wolves on the Porcupine caribou herd

    OpenAIRE

    Hayes, Robert D.; Russell, Donald E.

    2000-01-01

    Large migratory catibou {Rangifer tarandus) herds in the Arctic tend to be cyclic, and population trends are mainly driven by changes in forage or weather events, not by predation. We estimated daily kill rate by wolves on adult caribou in winter, then constructed a time and space dependent model to estimate annual wolf (Canis lupus) predation rate (P annual) on adult Porcupine caribou. Our model adjusts predation seasonally depending on caribou distribution: Pannual = SIGMAdaily* W *Ap(2)*Dp...

  11. Ecology of the Porcupine caribou herd

    OpenAIRE

    Kenneth R. Whitten

    1996-01-01

    Researchers have described general patterns of population regulation that fit most caribou (Rangifer tarandus) herds. Nevertheless, specific factors operating on particular populations vary greatly, and efforts to categorize herds according to the general patterns often lead to confusion. It is difficult for biologists to attempt to describe population dynamics in terms of density relationships for wide-ranging arctic caribou such as the Porcupine Herd. In these herds density varies as a func...

  12. Modeling the decline of the Porcupine Caribou Herd, 1989-1998: the importance of survival vs. recruitment

    OpenAIRE

    Arthur, Stephen M.; Whitten, Kenneth R.; Mauer, Francis J.; Cooley, Dorothy

    2003-01-01

    The Porcupine caribou (Rangifer tarandus granti) herd increased from approximately 100 000 animals during the 1970s to 178 000 in 1989, then declined to 129 000 by 1998. Our objective was to model the dynamics of this herd and investigate the potential that lower calf recruitment, as was observed during 1991-1993, produced the observed population changes. A deterministic model was prepared using estimates of birth and survival rates that reproduced the pattern of population growth from 1971-1...

  13. Electronic technology

    International Nuclear Information System (INIS)

    Kim, Jin Su

    2010-07-01

    This book is composed of five chapters, which introduces electronic technology about understanding of electronic, electronic component, radio, electronic application, communication technology, semiconductor on its basic, free electron and hole, intrinsic semiconductor and semiconductor element, Diode such as PN junction diode, characteristic of junction diode, rectifier circuit and smoothing circuit, transistor on structure of transistor, characteristic of transistor and common emitter circuit, electronic application about electronic equipment, communication technology and education, robot technology and high electronic technology.

  14. The Electron

    Energy Technology Data Exchange (ETDEWEB)

    Thomson, George

    1972-01-01

    Electrons are elementary particles of atoms that revolve around and outside the nucleus and have a negative charge. This booklet discusses how electrons relate to electricity, some applications of electrons, electrons as waves, electrons in atoms and solids, the electron microscope, among other things.

  15. A new Eimeria species (Protozoa: Eimeriidae) from caribou in Ameralik, West Greenland.

    Science.gov (United States)

    Skirnisson, K; Cuyler, C

    2016-04-01

    Fecal samples of 11 calves shot in the Ameralik area, West Greenland, in August-September 2014 were examined for coccidian parasites. The calves belonged to a population of interbreeding indigenous caribou Rangifer tarandus groenlandicus and feral semi-domestic Norwegian reindeer Rangifer tarandus tarandus. Two coccidian species were found: Eimeria rangiferis and a coccidium that was identified and described as a new species. The latter's sporulated oocyst is spherical or slightly subspherical. Average size is 25.6 × 24.8 μm. The oocyst has two distinct walls. Wall thickness is ∼1.4 μm. The unicolored outer wall is brown, the inner wall is dark gray. The oocysts contain a small polar granule but are devoid of a microphyle. The oocysts enclose four ovoid-shaped sporocysts with a rounded end opposite to the Stieda body. The average size of sporocysts is 15.2 × 7.8 μm. Sporocysts contain a granular sporocyst residuum that forms a spherical cluster between the sporocysts, one large refractile body is present in each sporozoite. The spherical form easily distinguishes oocysts of the new species from the seven previously described eimerid species in R. tarandus. This is the first eimerid described as a new species to the sciences from caribou in the Nearctic.

  16. Hard electronics; Hard electronics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Hard material technologies were surveyed to establish the hard electronic technology which offers superior characteristics under hard operational or environmental conditions as compared with conventional Si devices. The following technologies were separately surveyed: (1) The device and integration technologies of wide gap hard semiconductors such as SiC, diamond and nitride, (2) The technology of hard semiconductor devices for vacuum micro- electronics technology, and (3) The technology of hard new material devices for oxides. The formation technology of oxide thin films made remarkable progress after discovery of oxide superconductor materials, resulting in development of an atomic layer growth method and mist deposition method. This leading research is expected to solve such issues difficult to be easily realized by current Si technology as high-power, high-frequency and low-loss devices in power electronics, high temperature-proof and radiation-proof devices in ultimate electronics, and high-speed and dense- integrated devices in information electronics. 432 refs., 136 figs., 15 tabs.

  17. Electron radiography

    Science.gov (United States)

    Merrill, Frank E.; Morris, Christopher

    2005-05-17

    A system capable of performing radiography using a beam of electrons. Diffuser means receive a beam of electrons and diffuse the electrons before they enter first matching quadrupoles where the diffused electrons are focused prior to the diffused electrons entering an object. First imaging quadrupoles receive the focused diffused electrons after the focused diffused electrons have been scattered by the object for focusing the scattered electrons. Collimator means receive the scattered electrons and remove scattered electrons that have scattered to large angles. Second imaging quadrupoles receive the collimated scattered electrons and refocus the collimated scattered electrons and map the focused collimated scattered electrons to transverse locations on an image plane representative of the electrons' positions in the object.

  18. Eubacterium rangiferina, a novel usnic acid-resistant bacterium from the reindeer rumen

    Science.gov (United States)

    Sundset, Monica A.; Kohn, Alexandra; Mathiesen, Svein D.; Præsteng, Kirsti E.

    2008-08-01

    Reindeer are able to eat and utilize lichens as an important source of energy and nutrients. In the current study, the activities of antibiotic secondary metabolites including usnic, antranoric, fumarprotocetraric, and lobaric acid commonly found in lichens were tested against a collection of 26 anaerobic rumen bacterial isolates from reindeer ( Rangifer tarandus tarandus) using the agar diffusion method. The isolates were identified based on their 16S ribosomal ribonucleic acid (rRNA) gene sequences. Usnic acid had a potent antimicrobial effect against 25 of the isolates, belonging to Clostridiales, Enterococci, and Streptococci. Isolates of Clostridia and Streptococci were also susceptible to atranoric and lobaric acid. However, one isolate (R3_91_1) was found to be resistant to usnic, antranoric, fumarprotocetraric, and lobaric acid. R3_91_1 was also seen invading and adhering to lichen particles when grown in a liquid anaerobic culture as demonstrated by transmission electron microscopy. This was a Gram-negative, nonmotile rod (0.2-0.7 × 2.0-3.5 μm) with a deoxyribonucleic acid G + C content of 47.0 mol% and main cellular fatty acids including 15:0 anteiso-dimethyl acetal (DMA), 16:0 iso-fatty acid methyl ester (FAME), 13:0 iso-3OH FAME, and 17:0 anteiso-FAME, not matching any of the presently known profiles in the MIDI database. Combined, the phenotypic and genotypic traits including the 16S rRNA gene sequence show that R3_91_1 is a novel species inside the order Clostridiales within the family Lachnospiraceae, for which we propose the name Eubacterium rangiferina. This is the first record of a rumen bacterium able to tolerate and grow in the presence of usnic acid, indicating that the rumen microorganisms in these animals have adapted mechanisms to deal with lichen secondary metabolites, well known for their antimicrobial and toxic effects.

  19. Electrons, Electronic Publishing, and Electronic Display.

    Science.gov (United States)

    Brownrigg, Edwin B.; Lynch, Clifford A.

    1985-01-01

    Provides a perspective on electronic publishing by distinguishing between "Newtonian" publishing and "quantum-mechanical" publishing. Highlights include media and publishing, works delivered through electronic media, electronic publishing and the printed word, management of intellectual property, and recent copyright-law issues…

  20. Electron detector

    International Nuclear Information System (INIS)

    Hashimoto, H.; Mogami, A.

    1975-01-01

    A device for measuring electron densities at a given energy level in an electron beam or the like having strong background noise, for example, in the detection of Auger electric energy spectrums is described. An electron analyzer passes electrons at the given energy level and at the same time electrons of at least one adjacent energy level. Detecting means associated therewith produce signals indicative of the densities of the electrons at each energy level and combine these signals to produce a signal indicative of the density of the electrons of the given energy level absent background noise

  1. Electron/electron acoustic instability

    International Nuclear Information System (INIS)

    Gary, S.P.

    1987-01-01

    The electron acoustic wave becomes a normal mode of an unmagnetized collisionless plasma in the presence of two electron components with similar densities, but strongly disparate temperatures. The characteristic frequency of this mode is the plasma frequency of the cooler electron component. If these two electron components have a relative drift speed several times the thermal speed of the cooler component, the electron/electron acoustic instability may arise. This paper describes the parametric dependences of the threshold drift speed and maximum growth rate of this instability, and compares these with the same properties of the electron/ion acoustic instability. Under the condition of zero current, the electron/ion acoustic instability typically has the lower threshold drift speed, so that observation of the electron/electron acoustic instability is a strong indication of the presence of an electrical current in the plasma

  2. Electronic emission and electron guns

    International Nuclear Information System (INIS)

    Roy, Amitava

    2010-01-01

    This paper reviews the process of electron emission from metal surface. Although electrons move freely in conductors like metals, they normally do not leave the metal without some manipulation. In fact, heating and bombardment are the two primary ways in which electrons are emitted through the use of a heating element behind the cathode (termed thermionic emission) or as a result of bombardment with a beam of electrons, ions, or metastable atoms (termed secondary emission). Another important emission mechanism called Explosive Electron Emission (EEE) is also often used in various High Voltage Pulse Power Systems to generate very high current (few hundreds of kA) pulsed electron beams. The electron gun is the device in that it shoots off a continuous (or pulsed) stream of electrons. A brief idea about the evolution of the electron gun components and their basis of functioning are also discussed. (author)

  3. Sticker electronics

    KAUST Repository

    Hussain, Muhammad Mustafa; Torres Sevilla, Galo Andres; Diaz Cordero, Marlon Steven

    2017-01-01

    Electronic stickers may be manufactured on flexible substrates (110, 120, 130) as layers and packaged together. The package may then have an adhesive applied to one side to provide capability for sticking the electronic devices to surfaces

  4. ELECTRONIC SIGNATURES

    African Journals Online (AJOL)

    10332324

    "[to] promote the understanding and, acceptance of and growth in the number of electronic transactions .... Chapter III of the ECT Act is based on the UNCITRAL Model Law on Electronic. Commerce ... Communications Technology Law 146. 22.

  5. Electronic components

    CERN Document Server

    Colwell, Morris A

    1976-01-01

    Electronic Components provides a basic grounding in the practical aspects of using and selecting electronics components. The book describes the basic requirements needed to start practical work on electronic equipment, resistors and potentiometers, capacitance, and inductors and transformers. The text discusses semiconductor devices such as diodes, thyristors and triacs, transistors and heat sinks, logic and linear integrated circuits (I.C.s) and electromechanical devices. Common abbreviations applied to components are provided. Constructors and electronics engineers will find the book useful

  6. Understand electronics

    CERN Document Server

    Bishop, Owen

    2013-01-01

    Understand Electronics provides a readable introduction to the exciting world of electronics for the student or enthusiast with little previous knowledge. The subject is treated with the minimum of mathematics and the book is extensively illustrated.This is an essential guide for the newcomer to electronics, and replaces the author's best-selling Beginner's Guide to Electronics.The step-by-step approach makes this book ideal for introductory courses such as the Intermediate GNVQ.

  7. Electronic Commerce

    OpenAIRE

    Slavko Đerić

    2016-01-01

    Electronic commerce can be defined in different ways. Any definition helps to understand and explain that concept as better as possible.. Electronic commerce is a set of procedures and technologies that automate the tasks of financial transactions using electronic means. Also, according to some authors, electronic commerce is defined as a new concept, which is being developed and which includes process of buying and selling or exchanging products, services or information via computer networks...

  8. Electronic Publishing.

    Science.gov (United States)

    Lancaster, F. W.

    1989-01-01

    Describes various stages involved in the applications of electronic media to the publishing industry. Highlights include computer typesetting, or photocomposition; machine-readable databases; the distribution of publications in electronic form; computer conferencing and electronic mail; collaborative authorship; hypertext; hypermedia publications;…

  9. Sticker electronics

    KAUST Repository

    Hussain, Muhammad Mustafa

    2017-09-08

    Electronic stickers may be manufactured on flexible substrates (110, 120, 130) as layers and packaged together. The package may then have an adhesive applied to one side to provide capability for sticking the electronic devices to surfaces. The stickers can be wrappable, placed on surfaces, glued on walls or mirrors or wood or stone, and have electronics (112, 122, 132) which may or may not be ultrathin. Packaging for the electronic sticker can use polymer on cellulose manufacturing and/or three dimensional (3-D) printing. The electronic stickers may provide lighting capability, sensing capability, and/or recharging capabilities.

  10. Basic electronics

    CERN Document Server

    Holbrook, Harold D

    1971-01-01

    Basic Electronics is an elementary text designed for basic instruction in electricity and electronics. It gives emphasis on electronic emission and the vacuum tube and shows transistor circuits in parallel with electron tube circuits. This book also demonstrates how the transistor merely replaces the tube, with proper change of circuit constants as required. Many problems are presented at the end of each chapter. This book is comprised of 17 chapters and opens with an overview of electron theory, followed by a discussion on resistance, inductance, and capacitance, along with their effects on t

  11. Electronic Commerce and Electronic Business

    Indian Academy of Sciences (India)

    R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

    This special issue is motivated by the recent upsurge of research activity in the areas of electronic commerce and electronic business both in India and all over the world. The current ... Monte Carlo methods for pricing financial options are then.

  12. Electronic Government and Electronic Participation

    NARCIS (Netherlands)

    Tambouris, E; Scholl, H.J.; Janssen, M.F.W.H.A.; Wimmer, M.A.; Tarabanis, K; Gascó, M; Klievink, A.J.; Lindgren, I; Milano, M; Panagiotopoulos, P; Pardo, T.A.; Parycek, P; Sæbø, Ø

    2016-01-01

    Electronic government and electronic participation continue to transform the public sector and society worldwide and are constantly being transformed themselves by emerging information and communication technologies.This book presents papers from the 14th International Federation for Information

  13. Electronic Government and Electronic Participation

    NARCIS (Netherlands)

    Tambouris, E.; Scholl, H.J.; Janssen, M.F.W.H.A.; Wimmer, M.A.; Tarabanis, K.; Gascó, M.; Klievink, A.J.; Lindgren, I.; Milano, M.; Panagiotopoulos, P.; Pardo, T.A.; Parycek, P.; Sæbø, O.

    2015-01-01

    Electronic government and electronic participation continue to transform the public sector and society worldwide and are constantly being transformed themselves by emerging information and communication technologies. This book presents papers from the 14th International Federation for Information

  14. Electron Tree

    DEFF Research Database (Denmark)

    Appelt, Ane L; Rønde, Heidi S

    2013-01-01

    The photo shows a close-up of a Lichtenberg figure – popularly called an “electron tree” – produced in a cylinder of polymethyl methacrylate (PMMA). Electron trees are created by irradiating a suitable insulating material, in this case PMMA, with an intense high energy electron beam. Upon discharge......, during dielectric breakdown in the material, the electrons generate branching chains of fractures on leaving the PMMA, producing the tree pattern seen. To be able to create electron trees with a clinical linear accelerator, one needs to access the primary electron beam used for photon treatments. We...... appropriated a linac that was being decommissioned in our department and dismantled the head to circumvent the target and ion chambers. This is one of 24 electron trees produced before we had to stop the fun and allow the rest of the accelerator to be disassembled....

  15. `Twisted' electrons

    Science.gov (United States)

    Larocque, Hugo; Kaminer, Ido; Grillo, Vincenzo; Leuchs, Gerd; Padgett, Miles J.; Boyd, Robert W.; Segev, Mordechai; Karimi, Ebrahim

    2018-04-01

    Electrons have played a significant role in the development of many fields of physics during the last century. The interest surrounding them mostly involved their wave-like features prescribed by the quantum theory. In particular, these features correctly predict the behaviour of electrons in various physical systems including atoms, molecules, solid-state materials, and even in free space. Ten years ago, new breakthroughs were made, arising from the new ability to bestow orbital angular momentum (OAM) to the wave function of electrons. This quantity, in conjunction with the electron's charge, results in an additional magnetic property. Owing to these features, OAM-carrying, or twisted, electrons can effectively interact with magnetic fields in unprecedented ways and have motivated materials scientists to find new methods for generating twisted electrons and measuring their OAM content. Here, we provide an overview of such techniques along with an introduction to the exciting dynamics of twisted electrons.

  16. Electronic Commerce

    Directory of Open Access Journals (Sweden)

    Slavko Đerić

    2016-12-01

    Full Text Available Electronic commerce can be defined in different ways. Any definition helps to understand and explain that concept as better as possible.. Electronic commerce is a set of procedures and technologies that automate the tasks of financial transactions using electronic means. Also, according to some authors, electronic commerce is defined as a new concept, which is being developed and which includes process of buying and selling or exchanging products, services or information via computer networks, including the Internet. Electronic commerce is not limited just to buying and selling, but it also includes all pre-sales and after-sales ongoing activities along the supply chain. Introducing electronic commerce, using the Internet and Web services in business, realizes the way to a completely new type of economy - internet economy.

  17. Advanced Electronics

    Science.gov (United States)

    2017-07-21

    AFRL-RV-PS- AFRL-RV-PS- TR-2017-0114 TR-2017-0114 ADVANCED ELECTRONICS Ashwani Sharma 21 Jul 2017 Interim Report APPROVED FOR PUBLIC RELEASE...NUMBER Advanced Electronics 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 62601F 6. AUTHOR(S) 5d. PROJECT NUMBER 4846 Ashwani Sharma 5e. TASK NUMBER...Approved for public release; distribution is unlimited. (RDMX-17-14919 dtd 20 Mar 2018) 13. SUPPLEMENTARY NOTES 14. ABSTRACT The Space Electronics

  18. Electron spectroscopy

    International Nuclear Information System (INIS)

    Hegde, M.S.

    1979-01-01

    An introduction to the various techniques in electron spectroscopy is presented. These techniques include: (1) UV Photoelectron spectroscopy, (2) X-ray Photoelectron spectroscopy, (3) Auger electron spectroscopy, (4) Electron energy loss spectroscopy, (5) Penning ionization spectroscopy and (6) Ion neutralization spectroscopy. The radiations used in each technique, the basis of the technique and the special information obtained in structure determination in atoms and molecules by each technique are summarised. (A.K.)

  19. Polymer electronics

    CERN Document Server

    Hsin-Fei, Meng

    2013-01-01

    Polymer semiconductor is the only semiconductor that can be processed in solution. Electronics made by these flexible materials have many advantages such as large-area solution process, low cost, and high performance. Researchers and companies are increasingly dedicating time and money in polymer electronics. This book focuses on the fundamental materials and device physics of polymer electronics. It describes polymer light-emitting diodes, polymer field-effect transistors, organic vertical transistors, polymer solar cells, and many applications based on polymer electronics. The book also disc

  20. Electronics Industry

    National Research Council Canada - National Science Library

    Bell, Robert; Carroll-Garrison, Martina; Donovan, Daniel; Fisher, John; Guemmer, Paul; Harms, Robert; Kelly, Timothy; Love, Mattie; McReynolds, James; Ward, Ralph

    2006-01-01

    .... Government action to preserve strategic access to semiconductor producers is clearly needed to ensure DoD electronic systems can be built without compromising sensitive technology, though every...

  1. Microfluidic electronics.

    Science.gov (United States)

    Cheng, Shi; Wu, Zhigang

    2012-08-21

    Microfluidics, a field that has been well-established for several decades, has seen extensive applications in the areas of biology, chemistry, and medicine. However, it might be very hard to imagine how such soft microfluidic devices would be used in other areas, such as electronics, in which stiff, solid metals, insulators, and semiconductors have previously dominated. Very recently, things have radically changed. Taking advantage of native properties of microfluidics, advances in microfluidics-based electronics have shown great potential in numerous new appealing applications, e.g. bio-inspired devices, body-worn healthcare and medical sensing systems, and ergonomic units, in which conventional rigid, bulky electronics are facing insurmountable obstacles to fulfil the demand on comfortable user experience. Not only would the birth of microfluidic electronics contribute to both the microfluidics and electronics fields, but it may also shape the future of our daily life. Nevertheless, microfluidic electronics are still at a very early stage, and significant efforts in research and development are needed to advance this emerging field. The intention of this article is to review recent research outcomes in the field of microfluidic electronics, and address current technical challenges and issues. The outlook of future development in microfluidic electronic devices and systems, as well as new fabrication techniques, is also discussed. Moreover, the authors would like to inspire both the microfluidics and electronics communities to further exploit this newly-established field.

  2. Electron holography

    CERN Document Server

    Tonomura, Akira

    1993-01-01

    Holography was devised for breaking through the resolution limit of electron microscopes The advent of a "coherent" field emission electron beam has enabled the use of Electron Holography in various areas of magnetic domain structures observation, fluxon observation in superconductors, and fundamental experiments in physics which have been inaccessible using other techniques After examining the fundamentals of electron holography and its applications to the afore mentioned fields, a detailed discussion of the Aharonov-Bohm effect and the related experiments is presented Many photographs and illustrations are included to elucidate the text

  3. The electron

    International Nuclear Information System (INIS)

    Hestenes, David; Weingartshofer, Antonio

    1991-01-01

    The stupendous successes of the Dirac equation and quantum electro-dynamics have established the electron as the best understood of the fundamental constituents of matter. Nevertheless, physicists agree that the electron still has secrets to reveal. Moreover, powerful new theoretical and experimental tools for probing those secrets have been sharpened during the last decade. This workshop was organized to bring theorists and experimentalists together to discuss their common goal of knowing the electron. Present state and future prospects for progress toward that goal are here described. The theoretical papers encompass a wide range of views on the electron. Several argue that the 'Zitter-bewegung' is more than a mathematical peculiarity of the Dirac equation, that it may well be a real physical phenomenon and worthy of serious study, theoretically and experimentally. Besides generating the electron spin and magnetic moment, the 'Zitterbewegung' may be a vital clue to electron structure and self-interaction. Some of the papers employ a radical new formulation of the Dirac theory which reveals a hidden geo-metric structure in the theory that supports a 'Zitterbewegung' inter-pretation. For the last half century the properties of electrons have been probed primarily by scattering experiments at ever higher energies. Recently, however, two powerful new experimental techniques have emerged capable of giving alternative experimental views of the electron. First, techniques for confining single electrons for long term study have led to the most accurate measurements of the electron magnetic moment. Second, the interaction of high intensity laser fields with atoms and electrons have revealed striking new phenomena such as multiphoton ionization. refs.; figs.; tabs

  4. Effect of testosterone on antler growth in yearling male reindeer

    Directory of Open Access Journals (Sweden)

    Morten Ryg

    1983-05-01

    Full Text Available 1. The effect of exogenous testosterone on ander growth in yearling male reindeer (Rangifer tarandus tarandus was tested. 2. Testosterone (33 mg/kg inhibited antler growth, and in one animal induced cleaning and subsequent casting of the antlers. This animal grew a new set of antlers, which were cleaned at the normal time. 3. During treatment, there was an inverse relationship between peak testosterone levels and antler growth rate. 4. There was no effect of treatment on body weight or food intake. 5. It is concluded that the effects of testosterone on antler growth are qualitatively the same in reindeer as in other deer. However, because high testosterone doses were necessary to produce effects, it is questionable whether this hormone normally is responsible for the cessation of antler growth in reindeer.Virkningen av testosteron på gevirvekst hos ettårige reinbukker.Abstract in Norwegian / Sammendrag: 1. Virkningen av testosteron på gevirvekst hos ett-årige reinbukker (Rangifer tarandus tarandus ble undersøkt. 2. Testosteron (33 mg/kg hemmet gevirveksten, og hos ett dyr førte behandlingen til at geviret ble feiet og deretter felt. Deretter vokste det ut ett nytt gevir, som ble feiet til vanlig tid. 3. Det var en negativ korrelasjon mellom maksimale testosteronnivåer og gevirvekst under behandlingen. 4. Det var ingen effekt på forinntak eller vektutvikling. 5. Det blir konkludert med at virkningen av testosteron på gevirvekst er kvalitativt den samme hos rein som hos andre hjortedyr. Det er likevel tvilsomt om testosteron normalt er ansvarlig for avslutningen av gevirvekst hos rein, fordi store testosterondoser måtte til for å få noen virkning.Testosteronin vaikutus vuodenikåisten urosporojen sarvien kasvuun.Abstract in Finnish / Tiivistelmä: 1. Tutkimuksessa seurattiin ruiskeena annetun testosteronin vaikutusta vuodenikåisten urosporojen (Rangifer tarandus tarandus sarvien kasvuun. 2. Testosteron! (33 mg/kg hidasti sarvien

  5. Printed Electronics

    Science.gov (United States)

    Korkut, Sibel (Inventor); Chiang, Katherine S. (Inventor); Crain, John M. (Inventor); Aksay, Ilhan A. (Inventor); Lettow, John S. (Inventor); Chen, Chuan-Hua (Inventor); Prud'Homme, Robert K. (Inventor)

    2018-01-01

    Printed electronic device comprising a substrate onto at least one surface of which has been applied a layer of an electrically conductive ink comprising functionalized graphene sheets and at least one binder. A method of preparing printed electronic devices is further disclosed.

  6. Digital electronics

    CERN Document Server

    Morris, John

    2013-01-01

    An essential companion to John C Morris's 'Analogue Electronics', this clear and accessible text is designed for electronics students, teachers and enthusiasts who already have a basic understanding of electronics, and who wish to develop their knowledge of digital techniques and applications. Employing a discovery-based approach, the author covers fundamental theory before going on to develop an appreciation of logic networks, integrated circuit applications and analogue-digital conversion. A section on digital fault finding and useful ic data sheets completes th

  7. Electronic diagrams

    CERN Document Server

    Colwell, Morris A

    1976-01-01

    Electronic Diagrams is a ready reference and general guide to systems and circuit planning and in the preparation of diagrams for both newcomers and the more experienced. This book presents guidelines and logical procedures that the reader can follow and then be equipped to tackle large complex diagrams by recognition of characteristic 'building blocks' or 'black boxes'. The goal is to break down many of the barriers that often seem to deter students and laymen in learning the art of electronics, especially when they take up electronics as a spare time occupation. This text is comprised of nin

  8. Polymer electronics

    CERN Document Server

    Geoghegan, Mark

    2013-01-01

    Polymer electronics is the science behind many important new developments in technology, such as the flexible electronic display (e-ink) and many new developments in transistor technology. Solar cells, light-emitting diodes, and transistors are all areas where plastic electronics is likely to, or is already having, a serious impact on our daily lives. With polymer transistors and light-emitting diodes now being commercialised, there is a clear need for a pedagogic text thatdiscusses the subject in a clear and concise fashion suitable for senior undergraduate and graduate students. The content

  9. Starting electronics

    CERN Document Server

    Brindley, Keith

    2005-01-01

    Starting Electronics is unrivalled as a highly practical introduction for hobbyists, students and technicians. Keith Brindley introduces readers to the functions of the main component types, their uses, and the basic principles of building and designing electronic circuits. Breadboard layouts make this very much a ready-to-run book for the experimenter; and the use of multimeter, but not oscilloscopes, puts this practical exploration of electronics within reach of every home enthusiast's pocket. The third edition has kept the simplicity and clarity of the original. New material

  10. Stretchable electronics

    CERN Document Server

    Someya, Takao

    2012-01-01

    With its comprehensive coverage this handbook and ready reference brings together some of the most outstanding scientists in the field to lay down the undisputed knowledge on how to make electronics stretchable.As such, it focuses on gathering and evaluating the materials, designs, models and technologies that enable the fabrication of fully elastic electronic devices which can sustain high strain. Furthermore, it provides a review of those specific applications that directly benefit from highly compliant electronics, including transistors, photonic devices and sensors. In addition to stre

  11. Electron optics

    CERN Document Server

    Grivet, Pierre; Bertein, F; Castaing, R; Gauzit, M; Septier, Albert L

    1972-01-01

    Electron Optics, Second English Edition, Part I: Optics is a 10-chapter book that begins by elucidating the fundamental features and basic techniques of electron optics, as well as the distribution of potential and field in electrostatic lenses. This book then explains the field distribution in magnetic lenses; the optical properties of electrostatic and magnetic lenses; and the similarities and differences between glass optics and electron optics. Subsequent chapters focus on lens defects; some electrostatic lenses and triode guns; and magnetic lens models. The strong focusing lenses and pris

  12. Electronic identity

    CERN Document Server

    de Andrade, Norberto Nuno Gomes; Argles, David

    2014-01-01

    With the increasing availability of electronic services, security and a reliable means by which identity is verified is essential.Written by Norberto Andrade the first chapter of this book provides an overview of the main legal and regulatory aspects regarding electronic identity in Europe and assesses the importance of electronic identity for administration (public), business (private) and, above all, citizens. It also highlights the role of eID as a key enabler of the economy.In the second chapter Lisha Chen-Wilson, David Argles, Michele Schiano di Zenise and Gary Wills discuss the user-cent

  13. Power Electronics

    DEFF Research Database (Denmark)

    Iov, Florin; Ciobotaru, Mihai; Blaabjerg, Frede

    2008-01-01

    is to change the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. The other is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss the most...... emerging renewable energy sources, wind energy, which by means of power electronics are changing from being a minor energy source to be acting as an important power source in the energy system. Power electronics is the enabling technology and the presentation will cover the development in wind turbine...... technology from kW to MW, discuss which power electronic solutions are most feasible and used today....

  14. Paper electronics.

    Science.gov (United States)

    Tobjörk, Daniel; Österbacka, Ronald

    2011-05-03

    Paper is ubiquitous in everyday life and a truly low-cost substrate. The use of paper substrates could be extended even further, if electronic applications would be applied next to or below the printed graphics. However, applying electronics on paper is challenging. The paper surface is not only very rough compared to plastics, but is also porous. While this is detrimental for most electronic devices manufactured directly onto paper substrates, there are also approaches that are compatible with the rough and absorptive paper surface. In this review, recent advances and possibilities of these approaches are evaluated and the limitations of paper electronics are discussed. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Electron Microprobe

    Data.gov (United States)

    Federal Laboratory Consortium — The JEOL JXA-8600 is a conventional hairpin filament thermal emission electron microprobe that is more than 20 years old. It is capable of performing qualitative and...

  16. Electronic Aggression

    Centers for Disease Control (CDC) Podcasts

    Aggression is no longer limited to the school yard. New forms of electronic media, such as blogs, instant messaging, chat rooms, email, text messaging, and the internet are providing new arenas for youth violence to occur.

  17. Electron Emitters

    National Research Council Canada - National Science Library

    Tzeng, Yonhua

    2002-01-01

    When two carbon-nanotube coated electrodes are placed at a small distance from each other, electron emission from carbon nanotubes allows a DC or AC electrical current to flow between these two electrodes...

  18. Electronic plants

    Science.gov (United States)

    Stavrinidou, Eleni; Gabrielsson, Roger; Gomez, Eliot; Crispin, Xavier; Nilsson, Ove; Simon, Daniel T.; Berggren, Magnus

    2015-01-01

    The roots, stems, leaves, and vascular circuitry of higher plants are responsible for conveying the chemical signals that regulate growth and functions. From a certain perspective, these features are analogous to the contacts, interconnections, devices, and wires of discrete and integrated electronic circuits. Although many attempts have been made to augment plant function with electroactive materials, plants’ “circuitry” has never been directly merged with electronics. We report analog and digital organic electronic circuits and devices manufactured in living plants. The four key components of a circuit have been achieved using the xylem, leaves, veins, and signals of the plant as the template and integral part of the circuit elements and functions. With integrated and distributed electronics in plants, one can envisage a range of applications including precision recording and regulation of physiology, energy harvesting from photosynthesis, and alternatives to genetic modification for plant optimization. PMID:26702448

  19. Electronic Elections

    DEFF Research Database (Denmark)

    Schürmann, Carsten

    2009-01-01

    Electronic voting technology is a two edged sword. It comes with many risks but brings also many benefits. Instead of flat out rejecting the technology as uncontrollably dangerous, we advocate in this paper a different technological angle that renders electronic elections trustworthy beyond...... the usual levels of doubt. We exploit the trust that voters currently have into the democratic process and model our techniques around that observation accordingly. In particular, we propose a technique of trace emitting computations to record the individual steps of an electronic voting machine...... for a posteriori validation on an acceptably small trusted computing base. Our technology enables us to prove that an electronic elections preserves the voter’s intent, assuming that the voting machine and the trace verifier are independent....

  20. Electronic commerce

    OpenAIRE

    Zvolánková, Pavla

    2010-01-01

    The thesis deals with a description of electronic commerce from its beginning up to present situation in this area. It explains basic terms connected with electronic commerce and it summarizes the relevant legislation. Moreover it describes e-contracts and rights and duties of both contractual parties. The main view is the view of Internet retailer, which is reflected in the practical part focused on concrete problems of retailers.

  1. Printed Electronics

    Science.gov (United States)

    Wade, Jessica; Hollis, Joseph Razzell; Wood, Sebastian

    2018-04-01

    The combination of printing technology with manufacturing electronic devices enables a new paradigm of printable electronics, where 'smart' functionality can be readily incorporated into almost any product at low cost. Over recent decades, rapid progress has been made in this field, which is now emerging into the industrial andcommercial realm. However, successful development and commercialisation on a large scale presents some significant technical challenges. For fully-printable electronic systems, all the component parts must be deposited from solutions (inks), requiring the development of new inorganic, organic and hybrid materials.A variety of traditional printing techniques are being explored and adapted forprinting these new materials in ways that result in the best performing electronicdevices. Whilst printed electronics research has initially focused on traditional typesof electronic device such as light-emitting diodes, transistors, and photovoltaics, it is increasingly apparent that a much wider range of applications can be realised. The soft and stretchable nature of printable materials makes them perfect candidates forbioelectronics, resulting in a wealth of research looking at biocompatible printable inks and biosensors. Regardless of application, the properties of printed electronicmaterials depend on the chemical structures, processing conditions, device architecture,and operational conditions, the complex inter-relationships of which aredriving ongoing research. We focus on three particular 'hot topics', where attention is currently focused: novel materials, characterisation techniques, and device stability. With progress advancing very rapidly, printed electronics is expected to grow over the next decade into a key technology with an enormous economic and social impact.

  2. Molecular Electronics

    DEFF Research Database (Denmark)

    Jennum, Karsten Stein

    This thesis includes the synthesis and characterisation of organic compounds designed for molecular electronics. The synthesised organic molecules are mainly based on two motifs, the obigo(phenyleneethynylenes) (OPE)s and tetrathiafulvalene (TTF) as shown below. These two scaffolds (OPE and TTF......) are chemically merged together to form cruciform-like structures that are an essential part of the thesis. The cruciform molecules were subjected to molecular conductance measurements to explore their capability towards single-crystal field-effect transistors (Part 1), molecular wires, and single electron......, however, was obtained by a study of a single molecular transistor. The investigated OPE5-TTF compound was captured in a three-terminal experiment, whereby manipulation of the molecule’s electronic spin was possible in different charge states. Thus, we demonstrated how the cruciform molecules could...

  3. Electron tube

    Science.gov (United States)

    Suyama, Motohiro [Hamamatsu, JP; Fukasawa, Atsuhito [Hamamatsu, JP; Arisaka, Katsushi [Los Angeles, CA; Wang, Hanguo [North Hills, CA

    2011-12-20

    An electron tube of the present invention includes: a vacuum vessel including a face plate portion made of synthetic silica and having a surface on which a photoelectric surface is provided, a stem portion arranged facing the photoelectric surface and made of synthetic silica, and a side tube portion having one end connected to the face plate portion and the other end connected to the stem portion and made of synthetic silica; a projection portion arranged in the vacuum vessel, extending from the stem portion toward the photoelectric surface, and made of synthetic silica; and an electron detector arranged on the projection portion, for detecting electrons from the photoelectric surface, and made of silicon.

  4. Spin electronics

    CERN Document Server

    Buhrman, Robert; Daughton, James; Molnár, Stephan; Roukes, Michael

    2004-01-01

    This report is a comparative review of spin electronics ("spintronics") research and development activities in the United States, Japan, and Western Europe conducted by a panel of leading U.S. experts in the field. It covers materials, fabrication and characterization of magnetic nanostructures, magnetism and spin control in magnetic nanostructures, magneto-optical properties of semiconductors, and magnetoelectronics and devices. The panel's conclusions are based on a literature review and a series of site visits to leading spin electronics research centers in Japan and Western Europe. The panel found that Japan is clearly the world leader in new material synthesis and characterization; it is also a leader in magneto-optical properties of semiconductor devices. Europe is strong in theory pertaining to spin electronics, including injection device structures such as tunneling devices, and band structure predictions of materials properties, and in development of magnetic semiconductors and semiconductor heterost...

  5. Electronic Commerce

    Energy Technology Data Exchange (ETDEWEB)

    Laird, N. [NRG Information Services Inc., Calgary, AB (Canada)

    1995-11-01

    The concept of electronic commerce in the gas industry was discussed. It was defined as the integration of communication technology, advanced information processing capability and business standards, to improve effectiveness of the business process. Examples of electronic data interchange from the automotive, airline, and banking industry were given. The objective of using this technology in the gas industry was described as the provision of one electronic facility to make seamless contractual and operational arrangements for moving natural gas across participating pipelines. The benefit of seamless integration - one readily available standard system used by several companies - was highlighted. A list of value-added services such as the free movement of bulletins, directories, nominations,and other documents was provided.

  6. Electron accelerator

    International Nuclear Information System (INIS)

    Abramyan.

    1981-01-01

    The USSR produces an electron accelerator family of a simple design powered straight from the mains. The specifications are given of accelerators ELITA-400, ELITA-3, ELT-2, TEUS-3 and RIUS-5 with maximum electron energies of 0.3 to 5 MeV, a mean power of 10 to 70 kW operating in both the pulsed and the continuous (TEUS-3) modes. Pulsed accelerators ELITA-400 and ELITA-3 and RIUS-5 in which TESLA resonance transformers are used are characterized by their compact size. (Ha)

  7. Electronic cigarette

    OpenAIRE

    Wang, Tao

    2016-01-01

    As we know E-cigarette is becoming increasingly popular all over the world. It is a new product that the most of smoking people would like to buy and use. However, we are not realizing advantages and disadvantages of e-cigarette clearly. My objective was to research the development of electronic cigarette whether it is under control or a good way of marketing. The thesis has two main parts. They include answers to questions what is electronic cigarette and how to manage the whole industry...

  8. Climate driven range divergence among host species affects range-wide patterns of parasitism

    Directory of Open Access Journals (Sweden)

    Richard E. Feldman

    2017-01-01

    Full Text Available Species interactions like parasitism influence the outcome of climate-driven shifts in species ranges. For some host species, parasitism can only occur in that part of its range that overlaps with a second host species. Thus, predicting future parasitism may depend on how the ranges of the two hosts change in relation to each other. In this study, we tested whether the climate driven species range shift of Odocoileus virginianus (white-tailed deer accounts for predicted changes in parasitism of two other species from the family Cervidae, Alces alces (moose and Rangifer tarandus (caribou, in North America. We used MaxEnt models to predict the recent (2000 and future (2050 ranges (probabilities of occurrence of the cervids and a parasite Parelaphostrongylus tenuis (brainworm taking into account range shifts of the parasite’s intermediate gastropod hosts. Our models predicted that range overlap between A. alces/R. tarandus and P. tenuis will decrease between 2000 and 2050, an outcome that reflects decreased overlap between A. alces/R. tarandus and O. virginianus and not the parasites, themselves. Geographically, our models predicted increasing potential occurrence of P. tenuis where A. alces/R. tarandus are likely to decline, but minimal spatial overlap where A. alces/R. tarandus are likely to increase. Thus, parasitism may exacerbate climate-mediated southern contraction of A. alces and R. tarandus ranges but will have limited influence on northward range expansion. Our results suggest that the spatial dynamics of one host species may be the driving force behind future rates of parasitism for another host species.

  9. Electronic School.

    Science.gov (United States)

    Executive Educator, 1994

    1994-01-01

    This issue of "The Electronic School" features a special forum on computer networking. Articles specifically focus on network operating systems, cabling requirements, and network architecture. Tom Wall argues that virtual reality is not yet ready for classroom use. B.J. Novitsky profiles two high schools experimenting with CD-ROM…

  10. Electronic Government

    DEFF Research Database (Denmark)

    Wimmer, Maria A.; Traunmüller, Roland; Grönlund, Åke

    This book constitutes the refereed proceedings of the 4th International Conference on Electronic Government, EGOV 2005, held in Copenhagen, Denmark, in August 2005. The 30 revised papers presented were carefully reviewed and selected from numerous submissions, and assess the state-of-the-art in e-government/e-governance...

  11. Electronics department

    International Nuclear Information System (INIS)

    1979-01-01

    This report summarizes the activities in 1978 of some of the groups within the Electronics Department. The work covered includes plant protection and operator studies, reliability techniques, application of nuclear techniques to mineral exploration, applied laser physics, computing and, lastly, research instrumentation. (author)

  12. Power electronics

    Indian Academy of Sciences (India)

    Kishore Chatterjee

    This special issue of Sadhana is a compilation of papers selected from those presented at the 7th National Power. Electronics Conference (NPEC), held at the Indian Institute of Technology, Bombay, on 21–23 December 2015. From among the papers presented in NPEC-2017, selected papers were peer-reviewed for ...

  13. Electron linacs

    Energy Technology Data Exchange (ETDEWEB)

    Loew, G A; Schriber, S O [ed.

    1976-11-01

    A study was made of the present status of the thousand or so electron linacs in the world, and future trends in the field. These machines were classified according to their use: medical, industrial, and nuclear physics. In the medical category, two types of electron linacs are discussed: the conventional ones which are used for x-ray and electron therapy, and those which may in the future be used for negative pion therapy. Industrial machines discussed include linacs for radiographic and other specialized applications. In the nuclear physics category, the status of conventional low- and medium-energy as well as high duty cycle linacs is reviewed. The question of how one might obtain a c-w, 1 GeV, 100..mu..A electron linac is raised, and various options using recirculation and stretchers are examined. In this connection, the status of rf superconductivity is summarized. A review is given of linacs for injectors into synchrotrons and e/sup +-/ storage rings, and recent work done to upgrade the only multi-GeV linac, namely SLAC, is described.

  14. Greening Electronics

    DEFF Research Database (Denmark)

    Pizzol, Massimo; Søes Kokborg, Morten; Thomsen, Marianne

    Based on a literature review with focus on hazardous substances in waste electric and electronic equipment (WEEE) and numbers from a Danish treatment facility a flow analysis for specific substances has been conducted. Further, the accessible knowledge on human and environmental effects due...

  15. Electronic seal

    International Nuclear Information System (INIS)

    Musyck, E.

    1981-01-01

    An electronic seal is presented for a volume such as container for fissile materials. The seal encloses a lock for barring the space as well as a device for the detection and the recording of the intervention of the lock. (AF)

  16. Nuclear electronics

    International Nuclear Information System (INIS)

    Friese, T.

    1981-09-01

    A short survey is given on nuclear radiation detectors and nuclear electronics. It is written for newcomers and those, who are not very familiar with this technique. Some additional information is given on typical failures in nuclear measurement systems. (orig.) [de

  17. Electron linacs

    International Nuclear Information System (INIS)

    Loew, G.A.

    1976-01-01

    To study the present status of the thousand or so electron linacs in the world, and future trends in the field, we have classified these machines according to their use: medical, industrial, and nuclear physics. In the medical category, two types of electron linacs are discussed: the conventional ones which are used for X-ray and electron therapy, and those which may in the future be used for negative pion therapy. The section on industrial machines includes linacs for radiographic and other specialized applications. In the nuclear physics category, the status of conventional low- and medium-energy as well as high duty cycle linacs is reviewed. The question of how one might obtain a C.W., 1 GeV, 100 μA electron linac is raised and various options using recirculation and stretchers are examined. In this connection, the status of RF superconductivity is summarized. Following, there is a review of linacs for injectors into synchrotrons and e +- storage rings. The paper ends with a description of recent work done to upgrade the only multi-GeV linac, namely SLAC. (author)

  18. Wild reindeer of Yakutia

    Directory of Open Access Journals (Sweden)

    V.M. Safronov

    1996-01-01

    Full Text Available Three major herds of wild reindeer (Rangifer tarandus tarandus L., totaling over 200,000 animals, occur in the tundra and taiga of northern Yakutia. These herds have been expanding since the late 1950s and now occupy most of their historic range. In addition, several thousand wild reindeer occupy the New Siberian Islands and adjacent coastal mainland tundra, and there are about 60,000 largely sedentary forest reindeer in mountainous areas of the southern two-thirds of the province. Wild reindeer are commercially hunted throughout the mainland, and the production of wild meat is an important part of the economy of the province and of individual reindeer enterprises which produce both wild and domestic meat.

  19. The reindeer abomasal nematode (Ostertagia gruehneri) is naturally transmitted to sheep when sharing pastures

    DEFF Research Database (Denmark)

    Manninen, Saana-Maaria; Thamsborg, Stig Milan; Laaksonen, Sauli

    2014-01-01

    The increasing number of sheep (Ovis aries) in northern Finland, often alternately corralled with winter-fed reindeer (Rangifer tarandus tarandus), creates potential for cross-infection of gastrointestinal nematodes. The aim of this study was to elucidate this possibility with 43 animals. Eleven...... reindeer and 8 sheep had shared a corral by turns, reindeer during winters, and sheep in summers. Another 12 reindeer had no known contact with sheep. Twelve sheep had no close contact to other ruminants. Both reindeer groups were free-ranging during summers. During slaughter in September to November, 2003......, abomasa and parts of intestines were collected. Gastrointestinal nematodes were counted and identified. The species found were the following: in reindeer, Ostertagia gruehneri/Ostertagia arctica, Mazamastrongylus dagestanica, Nematodirus tarandi, Nematodirella longissimespiculata and Bunostomum...

  20. Predation and caribou populations

    Directory of Open Access Journals (Sweden)

    Dale R. Seip

    1991-10-01

    Full Text Available Predation, especially wolf (Canis lupus predation, limits many North American caribou (Rangifer tarandus populations below the density that food resources could sustain. The impact of predation depends on the parameters for the functional and numerical response of the wolves, relative to the potential annual increment of the caribou population. Differences in predator-avoidance strategies largely explain the major differences in caribou densities that occur naturally in North America. Caribou migrations that spatially separate caribou from wolves allow relatively high densities of caribou to survive. Non-migratory caribou that live in areas where wolf populations are sustained by alternate prey can be eliminated by wolf predation.

  1. Growth rates and morphological measurements of Porcupine caribou calves

    OpenAIRE

    Parker, Katherine L.

    1989-01-01

    Body weights, leg lengths, and surface area were monitored for bottle-raised barren-ground caribou calves (Rangifer tarandus granti) from the Porcupine herd up to 1 year of age. Body weights were compared with maternally-raised calves from the same cohort in the wild and from the Delta herd. A successful feeding regime for bottle-raising caribou calves is presented.Veksthastigheter og morfologiske mål hos Porcupine karibu-kalver.Abstract in Norwegian / Sammendrag: Kroppsvekter, visse kn...

  2. Electronic Nose and Electronic Tongue

    Science.gov (United States)

    Bhattacharyya, Nabarun; Bandhopadhyay, Rajib

    Human beings have five senses, namely, vision, hearing, touch, smell and taste. The sensors for vision, hearing and touch have been developed for several years. The need for sensors capable of mimicking the senses of smell and taste have been felt only recently in food industry, environmental monitoring and several industrial applications. In the ever-widening horizon of frontier research in the field of electronics and advanced computing, emergence of electronic nose (E-Nose) and electronic tongue (E-Tongue) have been drawing attention of scientists and technologists for more than a decade. By intelligent integration of multitudes of technologies like chemometrics, microelectronics and advanced soft computing, human olfaction has been successfully mimicked by such new techniques called machine olfaction (Pearce et al. 2002). But the very essence of such research and development efforts has centered on development of customized electronic nose and electronic tongue solutions specific to individual applications. In fact, research trends as of date clearly points to the fact that a machine olfaction system as versatile, universal and broadband as human nose and human tongue may not be feasible in the decades to come. But application specific solutions may definitely be demonstrated and commercialized by modulation in sensor design and fine-tuning the soft computing solutions. This chapter deals with theory, developments of E-Nose and E-Tongue technology and their applications. Also a succinct account of future trends of R&D efforts in this field with an objective of establishing co-relation between machine olfaction and human perception has been included.

  3. Electronics Industry

    Science.gov (United States)

    2007-01-01

    countries in developing market nations in Asia (such as Korea, Taiwan, Singapore, Malaysia , China and Vietnam). The competition for the knowledge, economic...Intel, Infineon Technologies, STMicroelectronics, Samsung Electronics, Texas Instruments, AMD Spansion, Philips Semiconductor, Freescale... Samsung ($19.7B), #5 Toshiba ($9.8B), #6 TSMC ($9.7B), #7 Hynix ($8.0B) and #8 Renesas ($7.9B) (McGrath, 2007, p. 3). Samsung , headquartered in

  4. Electronic banking

    OpenAIRE

    Gradišnik, Monika

    2017-01-01

    The development of information and communication technology is one of the most important reasons for the incredibly fast changes in business. Electronic commerce is spreading unstoppably in the operations of companies. The creation of new models, such as online banking, online shopping and the like, has sped up the development of the World Wide Web. Owing to the rapid progress of the World Wide Web and technologies for secure business operations, we can barely imagine life today without e...

  5. Electronic Aggression

    Centers for Disease Control (CDC) Podcasts

    2007-11-20

    Aggression is no longer limited to the school yard. New forms of electronic media, such as blogs, instant messaging, chat rooms, email, text messaging, and the internet are providing new arenas for youth violence to occur.  Created: 11/20/2007 by National Center for Injury Prevention and Control, Division of Violence Prevention.   Date Released: 11/28/2007.

  6. ELECTRON GUN

    Science.gov (United States)

    Christofilos, N.C.; Ehlers, K.W.

    1960-04-01

    A pulsed electron gun capable of delivering pulses at voltages of the order of 1 mv and currents of the order of 100 amperes is described. The principal novelty resides in a transformer construction which is disposed in the same vacuum housing as the electron source and accelerating electrode structure of the gun to supply the accelerating potential thereto. The transformer is provided by a plurality of magnetic cores disposed in circumferentially spaced relation and having a plurality of primary windings each inductively coupled to a different one of the cores, and a helical secondary winding which is disposed coaxially of the cores and passes therethrough in circumferential succession. Additional novelty resides in the disposition of the electron source cathode filament input leads interiorly of the transformer secondary winding which is hollow, as well as in the employment of a half-wave filament supply which is synchronously operated with the transformer supply such that the transformer is pulsed during the zero current portions of the half-wave cycle.

  7. Electronic sputtering

    International Nuclear Information System (INIS)

    Johnson, R.E.

    1989-01-01

    Electronic sputtering covers a range of phenomena from electron and photon stimulated desorption from multilayers to fast heavy ion-induced desorption (sputtering) of biomolecules. In this talk the author attempted. Therefore, to connect the detailed studies of argon ejection from solid argon by MeV ions and keV electrons to the sputtering of low temperatures molecular ices by MeV ions then to biomolecule ejection from organic solids. These are related via changing (dE/dx) e , molecular size, and transport processes occurring in materials. In this regard three distinct regions of (dE/dx) e have been identified. Since the talk this picture has been made explicit using a simple spike model for individual impulsive events in which spike interactions are combined linearly. Since that time also the molecular dynamics programs (at Virginia and Uppsala) have quantified both single atom and dimer processes in solid Ar and the momentum transport in large biomolecule sputtering. 5 refs

  8. Detectors - Electronics

    International Nuclear Information System (INIS)

    Bregeault, J.; Gabriel, J.L.; Hierle, G.; Lebotlan, P.; Leconte, A.; Lelandais, J.; Mosrin, P.; Munsch, P.; Saur, H.; Tillier, J.

    1998-01-01

    The reports presents the main results obtained in the fields of radiation detectors and associated electronics. In the domain of X-ray gas detectors for the keV range efforts were undertaken to rise the detector efficiency. Multiple gap parallel plate chambers of different types as well as different types of X → e - converters were tested to improve the efficiency (values of 2.4% at 60 KeV were reached). In the field of scintillators a study of new crystals has been carried out (among which Lutetium orthosilicate). CdTe diode strips for obtaining X-ray imaging were studied. The complete study of a linear array of 8 CdTe pixels has been performed and certified. The results are encouraging and point to this method as a satisfying solution. Also, a large dimension programmable chamber was used to study the influence of temperature on the inorganic scintillators in an interval from -40 deg. C to +150 deg. C. Temperature effects on other detectors and electronic circuits were also investigated. In the report mentioned is also the work carried out for the realization of the DEMON neutron multidetector. For neutron halo experiments different large area Si detectors associated with solid and gas position detectors were realized. In the frame of a contract with COGEMA a systematic study of Li doped glasses was undertaken aiming at replacing with a neutron probe the 3 He counters presently utilized in pollution monitoring. An industrial prototype has been realised. Other studies were related to integrated analog chains, materials for Cherenkov detectors, scintillation probes for experiments on fundamental processes, gas position sensitive detectors, etc. In the field of associated electronics there are mentioned the works related to the multidetector INDRA, data acquisition, software gamma spectrometry, automatic gas pressure regulation in detectors, etc

  9. Electronic materials

    CERN Document Server

    Kwok, H L

    2010-01-01

    The electronic properties of solids have become of increasing importance in the age of information technology. The study of solids and materials, while having originated from the disciplines of physics and chemistry, has evolved independently over the past few decades. The classical treatment of solid-state physics, which emphasized classifications, theories and fundamental physical principles, is no longer able to bridge the gap between materials advances and applications. In particular, the more recent developments in device physics and technology have not necessarily been driven by new conc

  10. Electronic wastes

    Science.gov (United States)

    Regel-Rosocka, Magdalena

    2018-03-01

    E-waste amount is growing at about 4% annually, and has become the fastest growing waste stream in the industrialized world. Over 50 million tons of e-waste are produced globally each year, and some of them end up in landfills causing danger of toxic chemicals leakage over time. E-waste is also sent to developing countries where informal processing of waste electrical and electronic equipment (WEEE) causes serious health and pollution problems. A huge interest in recovery of valuable metals from WEEE is clearly visible in a great number of scientific, popular scientific publications or government and industrial reports.

  11. Electron gun

    International Nuclear Information System (INIS)

    Chen, H.-Y.; Hughes, R.H.

    1979-01-01

    The invention described relates to cathode ray tubes, and particularly to color picture tubes of the type useful in home television receivers and therefore to electron guns. The invention is especially applicable to self-converging tube-yoke combinations with shadow mask tubes of the type having plural-beam in-line guns disposed in a horizontal plane, an apertured mask with vertically oriented slit-shaped apertures, and a screen with vertically oriented phosphor stripes. The invention is not, however, limited to use in such tubes and may in fact be used, e.g., in dot-type shadow mask tubes and index-type tubes. (Auth.)

  12. Bolometer electronics

    International Nuclear Information System (INIS)

    Groenig, D.E.

    1981-01-01

    High quality is required to the electronic which works with bolometer made of metal for measuring the radiation power in plasmaphysical experiments. If the bandwidth is to be 1 kHz, and the time constant of the bolometer is about 160 ms by high overall gain the critical parameters are the noise of the amplifier, pick up to the system, stability and decoupling of common mode signals. The high overall gain is necessary to be able to measure lowest radiation power. The design made is a good approach to the desired property. (orig.) [de

  13. Basic electronics

    CERN Document Server

    Tayal, DC

    2010-01-01

    The second edition of this book incorporates the comments and suggestions of my friends and students who have critically studied the first edition. In this edition the changes and additions have been made and subject matter has been rearranged at some places. The purpose of this text is to provide a comprehensive and up-to-date study of the principles of operation of solid state devices, their basic circuits and application of these circuits to various electronic systems, so that it can serve as a standard text not only for universities and colleges but also for technical institutes. This book

  14. Nuclear electronics

    International Nuclear Information System (INIS)

    Lucero B, E.

    1989-01-01

    The rapid technical development of Colombia over the past years, resulted among others, a considerable increase in the number of measuring instrumentation and testing laboratories, scientific research and metrology centers, in industry, agriculture, public health, education on the nuclear field, etc. IAN is a well organized institution with qualified management, trained staff and reasonably equipped laboratories to carry out tasks as: Metrology, standardization, quality control and maintenance and repair of nuclear instruments. The government of Colombia has adopted a policy to establish and operate through the country maintenance and repair facilities for nuclear instrumentation. This policy is reflected in the organization of electronic laboratories in Bogota-IAN

  15. Practical electronics handbook

    CERN Document Server

    Sinclair, Ian R

    2013-01-01

    Practical Electronics Handbook, Third Edition provides the frequently used and highly applicable principles of electronics and electronic circuits.The book contains relevant information in electronics. The topics discussed in the text include passive and active discrete components; linear and digital I.C.s; microprocessors and microprocessor systems; digital-analogue conversions; computer aids in electronics design; and electronic hardware components.Electronic circuit constructors, service engineers, electronic design engineers, and anyone with an interest in electronics will find the book ve

  16. Electron foreshock

    International Nuclear Information System (INIS)

    Klimas, A.J.

    1985-01-01

    ISEE particle and wave data are noted to furnish substantial support for the basic features of the velocity dispersed model at the foreshock boundary that was proposed by Filbert and Kellogg (1979). Among many remaining discrepancies between this model and observation, it is noted that unstable reduced velocity distributions have been discovered behind the thin boundary proposed by the model, and that these are at suprathermal energies lying far below those explainable in terms of an oscillating, two-stream instability. Although the long-theorized unstable beam of electrons has been found in the foreshock, there is still no ready explanation of the means by which it could have gotten there. 16 references

  17. Sustainable Management of Electronics

    Science.gov (United States)

    To provide information on EPAs strategy for electronics stewardship, certified electronics recyclers and the Challenge; as well as where to donate unwanted electronics, how to calculate benefits, and what's going on with electronics mgmt in their states.

  18. Advanced electron beam techniques

    International Nuclear Information System (INIS)

    Hirotsu, Yoshihiko; Yoshida, Yoichi

    2007-01-01

    After 100 years from the time of discovery of electron, we now have many applications of electron beam in science and technology. In this report, we review two important applications of electron beam: electron microscopy and pulsed-electron beam. Advanced electron microscopy techniques to investigate atomic and electronic structures, and pulsed-electron beam for investigating time-resolved structural change are described. (author)

  19. EDITORIAL: Synaptic electronics Synaptic electronics

    Science.gov (United States)

    Demming, Anna; Gimzewski, James K.; Vuillaume, Dominique

    2013-09-01

    Conventional computers excel in logic and accurate scientific calculations but make hard work of open ended problems that human brains handle easily. Even von Neumann—the mathematician and polymath who first developed the programming architecture that forms the basis of today's computers—was already looking to the brain for future developments before his death in 1957 [1]. Neuromorphic computing uses approaches that better mimic the working of the human brain. Recent developments in nanotechnology are now providing structures with very accommodating properties for neuromorphic approaches. This special issue, with guest editors James K Gimzewski and Dominique Vuillaume, is devoted to research at the serendipitous interface between the two disciplines. 'Synaptic electronics', looks at artificial devices with connections that demonstrate behaviour similar to synapses in the nervous system allowing a new and more powerful approach to computing. Synapses and connecting neurons respond differently to incident signals depending on the history of signals previously experienced, ultimately leading to short term and long term memory behaviour. The basic characteristics of a synapse can be replicated with around ten simple transistors. However with the human brain having around 1011 neurons and 1015 synapses, artificial neurons and synapses from basic transistors are unlikely to accommodate the scalability required. The discovery of nanoscale elements that function as 'memristors' has provided a key tool for the implementation of synaptic connections [2]. Leon Chua first developed the concept of the 'The memristor—the missing circuit element' in 1971 [3]. In this special issue he presents a tutorial describing how memristor research has fed into our understanding of synaptic behaviour and how they can be applied in information processing [4]. He also describes, 'The new principle of local activity, which uncovers a minuscule life-enabling "Goldilocks zone", dubbed the

  20. Carbon Nanotube Electron Gun

    Science.gov (United States)

    Nguyen, Cattien V. (Inventor); Ribaya, Bryan P. (Inventor)

    2013-01-01

    An electron gun, an electron source for an electron gun, an extractor for an electron gun, and a respective method for producing the electron gun, the electron source and the extractor are disclosed. Embodiments provide an electron source utilizing a carbon nanotube (CNT) bonded to a substrate for increased stability, reliability, and durability. An extractor with an aperture in a conductive material is used to extract electrons from the electron source, where the aperture may substantially align with the CNT of the electron source when the extractor and electron source are mated to form the electron gun. The electron source and extractor may have alignment features for aligning the electron source and the extractor, thereby bringing the aperture and CNT into substantial alignment when assembled. The alignment features may provide and maintain this alignment during operation to improve the field emission characteristics and overall system stability of the electron gun.

  1. Electron-electron Bremsstrahlung for bound target electrons

    International Nuclear Information System (INIS)

    Haug, E.

    2008-01-01

    For the process of electron-electron (e-e) Bremsstrahlung the momentum and energy distributions of the recoiling electrons are calculated in the laboratory frame. In order to get the differential cross section and the photon spectrum for target electrons which are bound to an atom, these formulae are multiplied by the incoherent scattering function and numerically integrated over the recoil energy. The effect of atomic binding is most pronounced at low energies of the incident electrons and for target atoms of high atomic numbers. The results are compared to those of previous calculations. (authors)

  2. Electron Beam Generation in Tevatron Electron Lenses

    International Nuclear Information System (INIS)

    Kamerdzhiev, V.; Kuznetsov, G.; Shiltsev, V.; Solyak, N.; Tiunov, M.

    2006-01-01

    New type of high perveance electron guns with convex cathode has been developed. Three guns described in this article are built to provide transverse electron current density distributions needed for Electron Lenses for beam-beam compensation in the Tevatron collider. The current distribution can be controlled either by the gun geometry or by voltage on a special control electrode located near cathode. We present the designs of the guns and report results of beam measurements on the test bench. Because of their high current density and low transverse temperature of electrons, electron guns of this type can be used in electron cooling and beam-beam compensation devices

  3. Electron beam generation in Tevatron electron lenses

    International Nuclear Information System (INIS)

    Kamerdzhiev, V.; Kuznetsov, G.; Shiltsev, V.; Solyak, N.; Tiunov, M.

    2006-01-01

    New type of high perveance electron guns with convex cathode has been developed. Three guns described in this article are built to provide transverse electron current density distributions needed for Electron Lenses for beam-beam compensation in the Tevatron collider. The current distribution can be controlled either by the gun geometry or by voltage on a special control electrode located near cathode. We present the designs of the guns and report results of beam measurements on the test bench. Because of their high current density and low transverse temperature of electrons, electron guns of this type can be used in electron cooling and beam-beam compensation devices

  4. Tracking wildlife by satellite: Current systems and performance

    Science.gov (United States)

    Harris, Richard B.; Fancy, Steven G.; Douglas, David C.; Garner, Gerald W.; Amstrup, Steven C.; McCabe, Thomas R.; Pank, Larry F.

    1990-01-01

    Since 1984, the U.S. Fish and Wildlife Service has used the Argos Data Collection and Location System (DCLS) and Tiros-N series satellites to monitor movements and activities of 10 species of large mammals in Alaska and the Rocky Mountain region. Reliability of the entire system was generally high. Data were received from instrumented caribou (Rangifer tarandus) during 91% of 318 possible transmitter-months. Transmitters failed prematurely on 5 of 45 caribou, 2 of 6 muskoxen (Ovibos moschatus), and 1 of 2 gray wolves (Canis lupus). Failure rates were considerably higher for polar (Ursus maritimus) and brown (U. arctos) bears than for caribou (Rangifer tarandus). Efficiency of gathering both locational and sensor data was related to both latitude and topography.Mean error of locations was estimated to be 954 m (median = 543 m) for transmitters on captive animals; 90% of locations were indices of animal activity were developed and evaluated. For several species, the long-term index was correlated with movement patterns and the short-term index was calibrated to specific activity categories (e.g., lying, feeding, walking).Data processing and sampling considerations were evaluated. Algorithms for choosing the most reliable among a series of reported locations were investigated. Applications of satellite telemetry data and problems with lack of independence among locations are discussed.

  5. Growth rates and morphological measurements of Porcupine caribou calves

    Directory of Open Access Journals (Sweden)

    Katherine L. Parker

    1989-06-01

    Full Text Available Body weights, leg lengths, and surface area were monitored for bottle-raised barren-ground caribou calves (Rangifer tarandus granti from the Porcupine herd up to 1 year of age. Body weights were compared with maternally-raised calves from the same cohort in the wild and from the Delta herd. A successful feeding regime for bottle-raising caribou calves is presented.Veksthastigheter og morfologiske mål hos Porcupine karibu-kalver.Abstract in Norwegian / Sammendrag: Kroppsvekter, visse knokkel-lengder og kropps-overflate areal ble målt hos flaske-oppfødde kalver av barren-ground karibu (Rangifer tarandus granti fra Porcupine-stammen opp til 1 års alder. Kroppsvekter ble sammelignet med normalt oppfødde kalver av samme type i det fri og fra Delta-stam-men. Det presenteres et vellykket system for flaske-oppforing av karibu-kalver.Porcupine-lauman karibuvasojen kasvunopeus ja morfologiset mitat.Abstract in Finnish / Yhteenveto: Porcupine -lauman pulloruokinnalla olleiden tundrakaribuvasojen ruumiinpainot, jalanpituu-det ja ruumiin pinta-alat mitattiin 1 vuoden ikäään saakka. Ruumiinpainoja verrattiin vastaaviin luonnon-oloissa kasvaneisiin saman lauman ja Delta -lauman vasoihin. Tutkimus kuvaa toimivan vasojen pulloruo-kintamenetelmän.

  6. Interplay between electron-phonon and electron-electron interactions

    International Nuclear Information System (INIS)

    Roesch, O.; Gunnarsson, O.; Han, J.E.; Crespi, V.H.

    2005-01-01

    We discuss the interplay between electron-electron and electron-phonon interactions for alkali-doped fullerides and high temperature superconductors. Due to the similarity of the electron and phonon energy scales, retardation effects are small for fullerides. This raises questions about the origin of superconductivity, since retardation effects are believed to be crucial for reducing effects of the Coulomb repulsion in conventional superconductors. We demonstrate that by treating the electron-electron and electron-phonon interactions on an equal footing, superconductivity can be understood in terms of a local pairing. The Jahn-Teller character of the important phonons in fullerides plays a crucial role for this result. To describe effects of phonons in cuprates, we derive a t-J model with phonons from the three-band model. Using exact diagonalization for small clusters, we find that the anomalous softening of the half-breathing phonon as well as its doping dependence can be explained. By comparing the solution of the t-J model with the Hartree-Fock approximation for the three-band model, we address results obtained in the local-density approximation for cuprates. We find that genuine many-body results, due to the interplay between the electron-electron and electron-phonon interactions, play an important role for the the results in the t-J model. (copyright 2005 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  7. Electronics for LHC Experiments

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2004-07-01

    This document gathers the abstracts of most presentations made at this workshop on electronics for the large hadron collider (LHC) experiments. The presentations were arranged into 6 sessions: 1) electronics for tracker, 2) trigger electronics, 3) detector control systems, 4) data acquisition, 5) electronics for calorimeters and electronics for muons, and 6) links, power systems, grounding and shielding, testing and quality assurance.

  8. Electronics for LHC Experiments

    International Nuclear Information System (INIS)

    2004-01-01

    This document gathers the abstracts of most presentations made at this workshop on electronics for the large hadron collider (LHC) experiments. The presentations were arranged into 6 sessions: 1) electronics for tracker, 2) trigger electronics, 3) detector control systems, 4) data acquisition, 5) electronics for calorimeters and electronics for muons, and 6) links, power systems, grounding and shielding, testing and quality assurance

  9. Electronics and Information

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ Previously founded as CCPITMachinery and Electronics Sub-council and CCOIC Machinery and Electronics Chamber of Corn-merce in June, 1988, CCPIT Electronics Sub-Council and CCOIC Electronics Chamber of Commerce were established in May, 1993, and then renamed as CCPIT Electronics and Information Industry Sub-council and CCOIC Electronics and Infor-mation Industry Chamber of Commerce (CCPITECC) in September 1999.

  10. Electron-electron coincidence spectroscopies at surfaces

    International Nuclear Information System (INIS)

    Stefani, G.; Iacobucci, S.; Ruocco, A.; Gotter, R.

    2002-01-01

    In the past 20 years, a steadily increasing number of electron-electron coincidence experiments on atoms and molecules have contributed to a deeper understanding of electron-electron correlation effects. In more recent years this technique has been extended to the study of solid surfaces. This class of one photon IN two electrons OUT experiments will be discussed with an emphasis on grazing incidence geometry, that is expected to be particularly suited for studying surfaces. The crucial question of which is the dominant mechanism that leads to ejection of pairs of electron from the surface will be addressed. It will be shown that, depending on the kinematics chosen, the correlated behaviour of the pairs of electrons detected might be singled out from independent particle one

  11. Electron Microscopy Center (EMC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Electron Microscopy Center (EMC) at Argonne National Laboratory develops and maintains unique capabilities for electron beam characterization and applies those...

  12. Caribou recovery and coexistence with introduced feral reindeer on the Nuussuaq Peninsula (70-71°N, West Greenland

    Directory of Open Access Journals (Sweden)

    Christine Cuyler

    2005-05-01

    Full Text Available The small native caribou population (Rangifer tarandus groenlandicus of Nuussuaq Peninsula was supplemented in 1968 with 10 semi-domestic reindeer (Rangifer tarandus tarandus. Hunting was prohibited in the early 1990s, but resumed with a quota of 100 animals in 1996 after the population was estimated to be around 400. Despite local criticism that herd size had increased, managers kept the estimate unchanged and permitted similar quotas for the next 5 years. To ascertain current status of the population, a late winter ground survey for minimum count, recruitment and distribution was done in April 2002 employing local hunters. Data collected included group size, location and animal sex/age. Only two age classes were used; calf (<1 year and "adult" (>1 year. The 2002 ground survey observed 1164 individuals and a calf percentage of approximately 30%. The bull to cow ratio was 0.32. This data did not allow a calculation of population size, because areas where maximum animal numbers were expected were preferentially sampled. Spatial segregation of these two subspecies is suggested, given the observed and unexpected dissimilar behavior, pheno-type and spatial distribution. If true, then by 2002 feral reindeer had established a successful population, while native caribou had recovered to number several hundred. Genetic sampling is necessary to examine this hypothesis. At current late winter recruitment rates animal density could increase rapidly making both range expansion and genetic mixing likely in future. Since the total non-ice covered area available is about 6000 km2, greater caribou/reindeer densities may not be compatible with sustainable range use. Harvest quotas were increased in 2002 and 2003, and may reduce densities and preserve caribou range for the future.

  13. Plasmaspheric electron content

    International Nuclear Information System (INIS)

    Hartmann, G.K.

    1978-01-01

    Measurements of the plasmaspheric electron content are reviewed with particular reference to the ATS-6 radio beacon experiment. From the review, it appears likely that measurement of the plasmaspheric electron content is the only one capable of monitoring electron fluxes continuously between L 1 and L 2. Some recent important results deduced from plasmaspheric electron content measurements are discussed

  14. Introduction to electronics

    CERN Multimedia

    CERN. Geneva

    2005-01-01

    Electronics in HEP experiments: specificities and evolution The Art of Electronics: is there something beyond Ohm's law? Basic building blocks of Analog electronics: quickly understanding a schematic Charge preamps, current preamps and future preamps, shaping and the rest Electronics noise: fundamental and practical Evolution of technology: ASICs, FPGAs...

  15. Introduction to Electronics course

    CERN Multimedia

    CERN. Geneva HR-RFA

    2006-01-01

    Electronics in HEP experiments: specificities and evolution The Art of Electronics: is there something beyond Ohm's law? Basic building blocks of Analog electronics: quickly understanding a schematic Charge preamps, current preamps and future preamps, shaping and the rest Electronics noise: fundamental and practical Evolution of technology: ASICs, FPGAs...

  16. Electronics engineer's reference book

    CERN Document Server

    Mazda, F F

    1989-01-01

    Electronics Engineer's Reference Book, Sixth Edition is a five-part book that begins with a synopsis of mathematical and electrical techniques used in the analysis of electronic systems. Part II covers physical phenomena, such as electricity, light, and radiation, often met with in electronic systems. Part III contains chapters on basic electronic components and materials, the building blocks of any electronic design. Part IV highlights electronic circuit design and instrumentation. The last part shows the application areas of electronics such as radar and computers.

  17. Electron transfer reactions

    CERN Document Server

    Cannon, R D

    2013-01-01

    Electron Transfer Reactions deals with the mechanisms of electron transfer reactions between metal ions in solution, as well as the electron exchange between atoms or molecules in either the gaseous or solid state. The book is divided into three parts. Part 1 covers the electron transfer between atoms and molecules in the gas state. Part 2 tackles the reaction paths of oxidation states and binuclear intermediates, as well as the mechanisms of electron transfer. Part 3 discusses the theories and models of the electron transfer process; theories and experiments involving bridged electron transfe

  18. Electron-electron interactions in artificial graphene

    Science.gov (United States)

    Rasanen, Esa

    2013-03-01

    Recent advances in the creation and modulation of graphenelike systems are introducing a science of ``designer Dirac materials.'' In its original definition, artificial graphene is a man-made nanostructure that consists of identical potential wells (quantum dots) arranged in an adjustable honeycomb lattice in the two-dimensional electron gas. As our ability to control the quality of artificial graphene samples improves, so grows the need for an accurate theory of its electronic properties, including the effects of electron-electron interactions. Here we determine those effects on the band structure and on the emergence of Dirac points, and discuss future investigations and challenges in this field.

  19. Electronic payment systems

    OpenAIRE

    Mláka, Michal

    2010-01-01

    This bachelor thesis analysis issue of electronic payment systems. It discusses their use for payments on the internet and sending funds via e-mail. The first part is devoted to the theoretical definition and legislation of the issuance of electronic money and activities of electronic money institutions. The main part of the work clearly focuses on the use of e-wallets, which is an integral part of electronic payment systems. E-wallet of electronic payment system Moneybookers is considered as...

  20. Electronics engineer's reference book

    CERN Document Server

    Turner, L W

    1976-01-01

    Electronics Engineer's Reference Book, 4th Edition is a reference book for electronic engineers that reviews the knowledge and techniques in electronics engineering and covers topics ranging from basics to materials and components, devices, circuits, measurements, and applications. This edition is comprised of 27 chapters; the first of which presents general information on electronics engineering, including terminology, mathematical equations, mathematical signs and symbols, and Greek alphabet and symbols. Attention then turns to the history of electronics; electromagnetic and nuclear radiatio

  1. Practical microwave electron devices

    CERN Document Server

    Meurant, Gerard

    2013-01-01

    Practical Microwave Electron Devices provides an understanding of microwave electron devices and their applications. All areas of microwave electron devices are covered. These include microwave solid-state devices, including popular microwave transistors and both passive and active diodes; quantum electron devices; thermionic devices (including relativistic thermionic devices); and ferrimagnetic electron devices. The design of each of these devices is discussed as well as their applications, including oscillation, amplification, switching, modulation, demodulation, and parametric interactions.

  2. Neutrinos in the Electron

    International Nuclear Information System (INIS)

    Koschmieder, E. L.

    2007-01-01

    I will show that one half of the rest mass of the electron consists of electron neutrinos and that the other half of the rest mass of the electron consists of the mass in the energy of electric oscillations. With this composition we can explain the rest mass of the electron, its charge, its spin and its magnetic moment We have also determined the rest masses of the muon neutrino and the electron neutrino

  3. Electron-electron interactions in disordered systems

    CERN Document Server

    Efros, AL

    1985-01-01

    ``Electron-Electron Interactions in Disordered Systems'' deals with the interplay of disorder and the Coulomb interaction. Prominent experts give state-of-the-art reviews of the theoretical and experimental work in this field and make it clear that the interplay of the two effects is essential, especially in low-dimensional systems.

  4. VIRTUAL ELECTRONIC COMPONENTS OF THE ELECTRONIC EQUIPMENT

    Directory of Open Access Journals (Sweden)

    E. Lazarevich

    2013-01-01

    Full Text Available The article is present new idea of the creation, developments and improvements of the electronic equipment of complex systems by means of the virtual electronic components. The idea of the virtual electronic components is a presentation and perception of the creation and developments of the equipment on two forming: real – in the manner of standard marketed block of the intellectual property and image – in the manner of virtual component. The real component in most cases slows the development of the electronic equipment. The imaginary component is the «locomotive» of development of the electronic equipment. The Imaginary component contains the scientific has brushed against developer. The scientific has brushed against developer reveals of itself in the manner of virtual component on the modern level of the design rates of microelectronics.

  5. Practical XHV electron gun

    International Nuclear Information System (INIS)

    Urata, Tomohiro; Ishikawa, Tsuyoshi; Cho, Boklae; Oshima, Chuhei

    2008-01-01

    We have developed practical XHV chambers of a electron gun, of which the operating pressures are 1x10 -9 Pa in a stainless-steel one and 4x10 -9 Pa in a permalloy one. By mounting a noble single-atom electron source with high brightness and high spatial coherence on the electron gun including electron optics, we demonstrated highly collimated electron-beam emission: ∼80% of the total emission current entered the electron optics. This ratio was two or three orders of magnitude higher than those of the conventional electron sources. In XHV, in addition, we confirmed stable electron emission up to 20 nA, which results in the specimen current high enough for scanning electron microscopes. (author)

  6. A superconducting electron spectrometer

    International Nuclear Information System (INIS)

    Guttormsen, M.; Huebel, H.; Grumbkow, A. von

    1983-03-01

    The set-up and tests of an electron spectrometer for in-beam conversion electron measurements are described. A superconducting solenoid is used to transport the electrons from the target to cooled Si(Li) detectors. The solenoid is designed to produce either a homogeneous axially symmetric field of up to 2 Tesla or a variety of field profiles by powering the inner and outer set of coils of the solenoid separately. The electron trajectories resulting for various field profiles are discussed. In-beam electron spectra taken in coincidence with electrons, gammas and alpha-particles are shown. (Auth.)

  7. Electronics for dummies

    CERN Document Server

    Shamieh

    2015-01-01

    Explore the basic concepts of electronics, build your electronics workbench, and begin creating fun electronics projects right away! Electronics For Dummies, 3rd Edition is your guide to the world of electronics. Spanning circuitry, wiring, robotics, transmitters, amplifiers, and more, this book demystifies electricity basics and beyond. The third edition offers new content revised to reflect the latest advancements in the electronics field, and it offers full color project examples to spark your creativity and inspire you to put your new skills to use! Packed with projects that can be comple

  8. RHIC electron lenses upgrades

    Energy Technology Data Exchange (ETDEWEB)

    Gu, X. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Altinbas, Z. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Bruno, D. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Binello, S. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Costanzo, M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Drees, A. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Fischer, W. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Gassner, D. M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Hock, J. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Hock, K. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Harvey, M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Luo, Y. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Marusic, A. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Mi, C. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Mernick, K. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Minty, M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Michnoff, R. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Miller, T. A. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Pikin, A. I. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Robert-Demolaize, G. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Samms, T. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Shrey, T. C. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Schoefer, V. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Tan, Y. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Than, R. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; Thieberger, P. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.; White, S. M. [Brookhaven National Lab. (BNL), Upton, NY (United States). Collider-Accelerator Dept.

    2015-05-03

    In the Relativistic Heavy Ion Collider (RHIC) 100 GeV polarized proton run in 2015, two electron lenses were used to partially compensate for the head-on beam-beam effect for the first time. Here, we describe the design of the current electron lens, detailing the hardware modifications made after the 2014 commissioning run with heavy ions. A new electron gun with 15-mm diameter cathode is characterized. The electron beam transverse profile was measured using a YAG screen and fitted with a Gaussian distribution. During operation, the overlap of the electron and proton beams was achieved using the electron backscattering detector in conjunction with an automated orbit control program.

  9. Electron emitting filaments for electron discharge devices

    International Nuclear Information System (INIS)

    Leung, K.N.; Pincosy, P.A.; Ehlers, K.W.

    1988-01-01

    This patent describes an electron emitting device for use in an electron discharge system. It comprises: a filament having a pair of terminal ends, electrical supply means for supplying electrical power to the terminal ends of the filament for directly heating the filament by the passage of an electrical current along the filament between the terminal ends, the filament being substantially tapered in cross section continuously in one direction from one of its pair of terminal ends to another of its pair of terminal ends to achieve uniform heating of the filament along the length thereof by compensating for the nonuniform current along the filament due to the emission of electrons therefrom

  10. Narrow electron injector for ballistic electron spectroscopy

    International Nuclear Information System (INIS)

    Kast, M.; Pacher, C.; Strasser, G.; Gornik, E.

    2001-01-01

    A three-terminal hot electron transistor is used to measure the normal energy distribution of ballistic electrons generated by an electron injector utilizing an improved injector design. A triple barrier resonant tunneling diode with a rectangular transmission function acts as a narrow (1 meV) energy filter. An asymmetric energy distribution with its maximum on the high-energy side with a full width at half maximum of ΔE inj =10 meV is derived. [copyright] 2001 American Institute of Physics

  11. Electronic Submission of Labels

    Science.gov (United States)

    Pesticide registrants can provide draft and final labels to EPA electronically for our review as part of the pesticide registration process. The electronic submission of labels by registrants is voluntary but strongly encouraged.

  12. Electron scattering from pyrimidine

    International Nuclear Information System (INIS)

    Colmenares, Rafael; Fuss, Martina C; García, Gustavo; Oller, Juan C; Muñoz, Antonio; Blanco, Francisco; Almeida, Diogo; Limão-Vieira, Paulo

    2014-01-01

    Electron scattering from pyrimidine (C 4 H 4 N 2 ) was investigated over a wide range of energies. Following different experimental and theoretical approaches, total, elastic and ionization cross sections as well as electron energy loss distributions were obtained.

  13. THE ELECTRONIC SIGNATURE

    Directory of Open Access Journals (Sweden)

    Voiculescu Madalina Irena

    2009-05-01

    Full Text Available Article refers to significance and the digital signature in electronic commerce. Internet and electronic commerce open up many new opportunities for the consumer, yet, the security (or perceived lack of security of exchanging personal and financial data

  14. Laboratory Handbook Electronics

    CERN Multimedia

    1966-01-01

    Laboratory manual 1966 format A3 with the list of equipment cables, electronic tubes, chassis, diodes transistors etc. One of CERN's first material catalogue for construction components for mechanical and electronic chassis.

  15. Presidential Electronic Records Library

    Data.gov (United States)

    National Archives and Records Administration — PERL (Presidential Electronic Records Library) used to ingest and provide internal access to the Presidential electronic Records of the Reagan, Bush, and Clinton...

  16. Chapter 9: Electronics

    International Nuclear Information System (INIS)

    Grupen, Claus; Shwartz, Boris A.

    2006-01-01

    Sophisticated front-end electronics are a key part of practically all modern radiation detector systems. This chapter introduces the basic principles and their implementation. Topics include signal acquisition, electronic noise, pulse shaping (analog and digital), and data readout techniques

  17. Certified Electronics Recyclers

    Science.gov (United States)

    Learn how EPA encourages all electronics recyclers become certified by demonstrating to an accredited, independent third-party auditor and that they meet specific standards to safely recycle and manage electronics.

  18. Reversibly Bistable Flexible Electronics

    KAUST Repository

    Alfaraj, Nasir

    2015-01-01

    Introducing the notion of transformational silicon electronics has paved the way for integrating various applications with silicon-based, modern, high-performance electronic circuits that are mechanically flexible and optically semitransparent

  19. Electronic Signature Policy

    Science.gov (United States)

    Establishes the United States Environmental Protection Agency's approach to adopting electronic signature technology and best practices to ensure electronic signatures applied to official Agency documents are legally valid and enforceable

  20. Electronics Industry Study Report

    National Research Council Canada - National Science Library

    Belt, David; Fellows, John R; Kameru, Philip; Nazaroff, Boris-Frank A; Pauroso, Anthony; Schulz, Frederick; Ballew, Bob; Bond, Thomas; Demers, Stephy; Kirkpatrick, Steve

    2005-01-01

    This paper provides a national strategy for the US electronics industry. Electronics is one of the largest industries in the US and plays a critical role in almost every aspect of national security...

  1. Electron microscopy for Engineers

    International Nuclear Information System (INIS)

    Jones, I P

    2009-01-01

    This paper reviews the application of (mainly) Transmission Electron Microscopy (TEM) in an engineering context. The first two sections are TEM and chemical in nature; the final three sections are more general and include aspects of Scanning Electron Microscopy (SEM).

  2. ELSA electron stretcher devices

    International Nuclear Information System (INIS)

    1979-10-01

    The use of an electron stretcher ring at the Bonn electron synchrotron is discussed. The construction of the proposed ring is described, and the costs are estimated. Possible experiments using this ring are discussed. (HSI)

  3. Electron shuttles in biotechnology.

    Science.gov (United States)

    Watanabe, Kazuya; Manefield, Mike; Lee, Matthew; Kouzuma, Atsushi

    2009-12-01

    Electron-shuttling compounds (electron shuttles [ESs], or redox mediators) are essential components in intracellular electron transfer, while microbes also utilize self-produced and naturally present ESs for extracellular electron transfer. These compounds assist in microbial energy metabolism by facilitating electron transfer between microbes, from electron-donating substances to microbes, and/or from microbes to electron-accepting substances. Artificially supplemented ESs can create new routes of electron flow in the microbial energy metabolism, thereby opening up new possibilities for the application of microbes to biotechnology processes. Typical examples of such processes include halogenated-organics bioremediation, azo-dye decolorization, and microbial fuel cells. Herein we suggest that ESs can be applied widely to create new microbial biotechnology processes.

  4. Electronic Science Seminar

    Directory of Open Access Journals (Sweden)

    Geidarov P.Sh.

    2015-09-01

    Full Text Available The structure of electronic scientific seminar, which provides a high level of quality of the objectivity in the evaluation of scientific papers, including dissertations, is described. Conditions for the implementation of electronic scientific seminar are also considered.

  5. Copyright of Electronic Publishing.

    Science.gov (United States)

    Dong, Elaine; Wang, Bob

    2002-01-01

    Analyzes the importance of copyright, considers the main causes of copyright infringement in electronic publishing, discusses fair use of a copyrighted work, and suggests methods to safeguard copyrighted electronic publishing, including legislation, contracts, and technology. (Author/LRW)

  6. Paleoclassical electron heat transport

    International Nuclear Information System (INIS)

    Callen, J.D.

    2005-01-01

    Radial electron heat transport in low collisionality, magnetically-confined toroidal plasmas is shown to result from paleoclassical Coulomb collision processes (parallel electron heat conduction and magnetic field diffusion). In such plasmas the electron temperature equilibrates along magnetic field lines a long length L, which is the minimum of the electron collision length and a maximum effective half length of helical field lines. Thus, the diffusing field lines induce a radial electron heat diffusivity M ≅ L/(πR 0q ) ∼ 10 >> 1 times the magnetic field diffusivity η/μ 0 ≅ ν e (c/ω p ) 2 . The paleoclassical electron heat flux model provides interpretations for many features of 'anomalous' electron heat transport: magnitude and radial profile of electron heat diffusivity (in tokamaks, STs, and RFPs), Alcator scaling in high density plasmas, transport barriers around low order rational surfaces and near a separatrix, and a natural heat pinch (or minimum temperature gradient) heat flux form. (author)

  7. Extreme environment electronics

    CERN Document Server

    Cressler, John D

    2012-01-01

    Unfriendly to conventional electronic devices, circuits, and systems, extreme environments represent a serious challenge to designers and mission architects. The first truly comprehensive guide to this specialized field, Extreme Environment Electronics explains the essential aspects of designing and using devices, circuits, and electronic systems intended to operate in extreme environments, including across wide temperature ranges and in radiation-intense scenarios such as space. The Definitive Guide to Extreme Environment Electronics Featuring contributions by some of the world's foremost exp

  8. Electronic theodolite intersection systems

    OpenAIRE

    Bingley, R. M.

    1990-01-01

    The development of electronic surveying instruments, such as electronic theodolites, and concurrent advances in computer technology, has revolutionised engineering surveying; one of the more recent examples being the introduction of Electronic Theodolite Intersection Systems (ETISs). An ETIS consists of two or more electronic theodolites and a computer, with peripheral hardware and suitable software. The theoretical principles on which they are based have been known for a long time, but ...

  9. Electron-attachment processes

    International Nuclear Information System (INIS)

    Christophorou, L.G.; McCorkle, D.L.; Christodoulides, A.A.

    1982-01-01

    Topics covered include: (1) modes of production of negative ions, (2) techniques for the study of electron attachment processes, (3) dissociative electron attachment to ground-state molecules, (4) dissociative electron attachment to hot molecules (effects of temperature on dissociative electron attachment), (5) molecular parent negative ions, and (6) negative ions formed by ion-pair processes and by collisions of molecules with ground state and Rydberg atoms

  10. Handbook on electronic commerce

    Energy Technology Data Exchange (ETDEWEB)

    Shaw, M. [Illinois Univ., Urbana, IL (United States). Beckman Inst. for Advanced Science and Technology; Blanning, R. [Vanderbilt Univ., Nashville, TN (United States). Owen Graduate School of Management; Strader, T. [Iowa State Univ., Ames, IA (United States). Management Information Systems; Whinston, A. [eds.] [Texas Univ., Austin, TX (United States). Dept. of Management Science and Information Systems

    2000-07-01

    The world is undergoing a revolution to a digital economy, with pronounced implications for corporate strategy, marketing, operations, information systems, customer services, global supply-chain management, and product distribution. This handbook examines the aspects of electronic commerce, including electronic storefront, on-line business, consumer interface, business-to-business networking, digital payment, legal issues, information product development, and electronic business models. Indispensable for academics, students and professionals who are interested in Electronic Commerce and Internet Business. (orig.)

  11. Electron Cyclotron Resonances in Electron Cloud Dynamics

    International Nuclear Information System (INIS)

    Celata, Christine; Celata, C.M.; Furman, Miguel A.; Vay, J.-L.; Yu, Jennifer W.

    2008-01-01

    We report a previously unknown resonance for electron cloud dynamics. The 2D simulation code 'POSINST' was used to study the electron cloud buildup at different z positions in the International Linear Collider positron damping ring wiggler. An electron equilibrium density enhancement of up to a factor of 3 was found at magnetic field values for which the bunch frequency is an integral multiple of the electron cyclotron frequency. At low magnetic fields the effects of the resonance are prominent, but when B exceeds ∼(2 pi mec/(elb)), with lb = bunch length, effects of the resonance disappear. Thus short bunches and low B fields are required for observing the effect. The reason for the B field dependence, an explanation of the dynamics, and the results of the 2D simulations and of a single-particle tracking code used to elucidate details of the dynamics are discussed

  12. Syringe injectable electronics

    Science.gov (United States)

    Hong, Guosong; Zhou, Tao; Jin, Lihua; Duvvuri, Madhavi; Jiang, Zhe; Kruskal, Peter; Xie, Chong; Suo, Zhigang; Fang, Ying; Lieber, Charles M.

    2015-01-01

    Seamless and minimally-invasive three-dimensional (3D) interpenetration of electronics within artificial or natural structures could allow for continuous monitoring and manipulation of their properties. Flexible electronics provide a means for conforming electronics to non-planar surfaces, yet targeted delivery of flexible electronics to internal regions remains difficult. Here, we overcome this challenge by demonstrating syringe injection and subsequent unfolding of submicrometer-thick, centimeter-scale macroporous mesh electronics through needles with a diameter as small as 100 micrometers. Our results show that electronic components can be injected into man-made and biological cavities, as well as dense gels and tissue, with > 90% device yield. We demonstrate several applications of syringe injectable electronics as a general approach for interpenetrating flexible electronics with 3D structures, including (i) monitoring of internal mechanical strains in polymer cavities, (ii) tight integration and low chronic immunoreactivity with several distinct regions of the brain, and (iii) in vivo multiplexed neural recording. Moreover, syringe injection enables delivery of flexible electronics through a rigid shell, delivery of large volume flexible electronics that can fill internal cavities and co-injection of electronics with other materials into host structures, opening up unique applications for flexible electronics. PMID:26053995

  13. Syringe-injectable electronics.

    Science.gov (United States)

    Liu, Jia; Fu, Tian-Ming; Cheng, Zengguang; Hong, Guosong; Zhou, Tao; Jin, Lihua; Duvvuri, Madhavi; Jiang, Zhe; Kruskal, Peter; Xie, Chong; Suo, Zhigang; Fang, Ying; Lieber, Charles M

    2015-07-01

    Seamless and minimally invasive three-dimensional interpenetration of electronics within artificial or natural structures could allow for continuous monitoring and manipulation of their properties. Flexible electronics provide a means for conforming electronics to non-planar surfaces, yet targeted delivery of flexible electronics to internal regions remains difficult. Here, we overcome this challenge by demonstrating the syringe injection (and subsequent unfolding) of sub-micrometre-thick, centimetre-scale macroporous mesh electronics through needles with a diameter as small as 100 μm. Our results show that electronic components can be injected into man-made and biological cavities, as well as dense gels and tissue, with >90% device yield. We demonstrate several applications of syringe-injectable electronics as a general approach for interpenetrating flexible electronics with three-dimensional structures, including (1) monitoring internal mechanical strains in polymer cavities, (2) tight integration and low chronic immunoreactivity with several distinct regions of the brain, and (3) in vivo multiplexed neural recording. Moreover, syringe injection enables the delivery of flexible electronics through a rigid shell, the delivery of large-volume flexible electronics that can fill internal cavities, and co-injection of electronics with other materials into host structures, opening up unique applications for flexible electronics.

  14. Electrons in Condensed Matter

    Indian Academy of Sciences (India)

    three freely moving electrons. The value at room temperature is 3.1 k B; the electronic specific heat is missing! The next stage in the electronic theory of solids clears up ..... a big dog? We do not know the reasons yet. As it turns out for many fundamentally interesting phenomena, colossal magneto- resistance may also find ...

  15. Arduino electronics blueprints

    CERN Document Server

    Wilcher, Don

    2015-01-01

    This book is intended for those who want to learn about electronics and coding by building amazing devices and gadgets with Arduino. If you are an experienced developer who understands the basics of electronics, then you can quickly learn how to build smart devices using Arduino. The only experience needed is a desire to learn about electronics, circuit breadboarding, and coding.

  16. EFFECTIVE ELECTRONIC TUTORIAL

    Directory of Open Access Journals (Sweden)

    Andrei A. Fedoseev

    2014-01-01

    Full Text Available The article analyzes effective electronic tutorials creation and application based on the theory of pedagogy. Herewith the issues of necessary electronic tutorial functional, ways of the educational process organization with the use of information and communication technologies and the logistics of electronic educational resources are touched upon. 

  17. Embracing Electronic Publishing.

    Science.gov (United States)

    Wills, Gordon

    1996-01-01

    Electronic publishing is the grandest revolution in the capture and dissemination of academic and professional knowledge since Caxton developed the printing press. This article examines electronic publishing, describes different electronic publishing scenarios (authors' cooperative, consolidator/retailer/agent oligopsony, publisher oligopoly), and…

  18. Soldering in electronics assembly

    CERN Document Server

    Judd, Mike

    2013-01-01

    Soldering in Electronics Assembly discusses several concerns in soldering of electronic assemblies. The book is comprised of nine chapters that tackle different areas in electronic assembly soldering. Chapter 1 discusses the soldering process itself, while Chapter 2 covers the electronic assemblies. Chapter 3 talks about solders and Chapter 4 deals with flux. The text also tackles the CS and SC soldering process. The cleaning of soldered assemblies, solder quality, and standards and specifications are also discussed. The book will be of great use to professionals who deal with electronic assem

  19. Quantitative secondary electron detection

    Science.gov (United States)

    Agrawal, Jyoti; Joy, David C.; Nayak, Subuhadarshi

    2018-05-08

    Quantitative Secondary Electron Detection (QSED) using the array of solid state devices (SSD) based electron-counters enable critical dimension metrology measurements in materials such as semiconductors, nanomaterials, and biological samples (FIG. 3). Methods and devices effect a quantitative detection of secondary electrons with the array of solid state detectors comprising a number of solid state detectors. An array senses the number of secondary electrons with a plurality of solid state detectors, counting the number of secondary electrons with a time to digital converter circuit in counter mode.

  20. Electron distribution function in electron-beam-excited plasmas

    International Nuclear Information System (INIS)

    Brau, C.A.

    1976-01-01

    In monatomic plasmas excited by high-intensity relativistic electron beams, the electron secondary distribution function is dominated by elastic electron-electron collisions at low electron energies and by inelastic electron-atom collisions at high electron energies (above the excitation threshold). Under these conditions, the total rate of excitation by inelastic collisions is limited by the rate at which electron-electron collisions relax the distribution function in the neighborhood of the excitation threshold. To describe this effect quantitatively, an approximate analytic solution of the electron Boltzmann equation is obtained, including both electron-electron and inelastic collisions. The result provides a simple formula for the total rate of excitation

  1. Molecular electron affinities

    International Nuclear Information System (INIS)

    Fukuda, E.K.

    1983-01-01

    Molecular electron affinities have historically been difficult quantities to measure accurately. These difficulties arise from differences in structure between the ion and neutral as well as the existence of excited negative ion states. To circumvent these problems, relative electron affinities were determined in this dissertation by studying equilibrium electron transfer reactions using a pulsed ion cyclotron resonance (ICR) spectrometer. Direct measurement of ion and neutral concentrations for reactions of the general type, A - + B = B - + A, allow calculation of the equilibrium constant and, therefore, the free energy change. The free energy difference is related to the difference in electron affinities between A and B. A relative electron affinity scale covering a range of about 45 kcal/mol was constructed with various substituted p-benzoquinones, nitrobenzenes, anhydrides, and benzophenones. To assign absolute electron affinities, various species with accurately known electron affinities are tied to the scale via ion-cyclotron double resonance bracketing techniques. After the relative scale is anchored to these species with well-known electron affinities, the scale is then used as a check on other electron affinity values as well as generating new electron affinity values. Many discrepancies were found between the electron affinities measured using the ICR technique and previous literature determinations

  2. Nonambipolar electron source

    International Nuclear Information System (INIS)

    Longmier, B.; Baalrud, S.; Hershkowitz, N.

    2006-01-01

    A radio frequency (rf) plasma-based electron source that does not rely on electron emission at a cathode surface has been constructed. All of the random electron flux incident on an exit aperture is extracted through an electron sheath resulting in total nonambipolar flow within the device when the ratio of the ion loss area to the electron loss area is approximately equal to the square root of the ratio of the ion mass to the electron mass, and the ion sheath potential drop at the chamber walls is much larger than T e /e. The nonambipolar electron source (NES) has an axisymmetric magnetic field of 100 G at the extraction aperture that results in a uniform plasma potential across the aperture, allowing the extraction of all the incident electron flux without the use of grids. A prototype NES has produced 15 A of continuous electron current, using 15 SCCM (SCCM denotes cubic centimeter per minute at STP) Ar, 1200 W rf power at 13.56 MHz, and 6 times gas utilization. Alternatively 8 A of electron current can be produced, using 3 SCCM Ar at 1200 W rf and 20 times gas utilization. NES could replace hollow cathode electron sources in a wide variety of applications

  3. High brightness electron accelerator

    International Nuclear Information System (INIS)

    Sheffield, R.L.; Carlsten, B.E.; Young, L.M.

    1994-01-01

    A compact high brightness linear accelerator is provided for use, e.g., in a free electron laser. The accelerator has a first plurality of accelerating cavities having end walls with four coupling slots for accelerating electrons to high velocities in the absence of quadrupole fields. A second plurality of cavities receives the high velocity electrons for further acceleration, where each of the second cavities has end walls with two coupling slots for acceleration in the absence of dipole fields. The accelerator also includes a first cavity with an extended length to provide for phase matching the electron beam along the accelerating cavities. A solenoid is provided about the photocathode that emits the electrons, where the solenoid is configured to provide a substantially uniform magnetic field over the photocathode surface to minimize emittance of the electrons as the electrons enter the first cavity. 5 figs

  4. Electronic equipment packaging technology

    CERN Document Server

    Ginsberg, Gerald L

    1992-01-01

    The last twenty years have seen major advances in the electronics industry. Perhaps the most significant aspect of these advances has been the significant role that electronic equipment plays in almost all product markets. Even though electronic equipment is used in a broad base of applications, many future applications have yet to be conceived. This versatility of electron­ ics has been brought about primarily by the significant advances that have been made in integrated circuit technology. The electronic product user is rarely aware of the integrated circuits within the equipment. However, the user is often very aware of the size, weight, mod­ ularity, maintainability, aesthetics, and human interface features of the product. In fact, these are aspects of the products that often are instrumental in deter­ mining its success or failure in the marketplace. Optimizing these and other product features is the primary role of Electronic Equipment Packaging Technology. As the electronics industry continues to pr...

  5. Automotive electronics design fundamentals

    CERN Document Server

    Zaman, Najamuz

    2015-01-01

    This book explains the topology behind automotive electronics architectures and examines how they can be profoundly augmented with embedded controllers. These controllers serve as the core building blocks of today’s vehicle electronics. Rather than simply teaching electrical basics, this unique resource focuses on the fundamental concepts of vehicle electronics architecture, and details the wide variety of Electronic Control Modules (ECMs) that enable the increasingly sophisticated "bells & whistles" of modern designs.  A must-have for automotive design engineers, technicians working in automotive electronics repair centers and students taking automotive electronics courses, this guide bridges the gap between academic instruction and industry practice with clear, concise advice on how to design and optimize automotive electronics with embedded controllers.

  6. Ion plasma electron gun

    International Nuclear Information System (INIS)

    Wakalopulos, G.

    1976-01-01

    In the disclosed electron gun positive ions generated by a hollow cathode plasma discharge in a first chamber are accelerated through control and shield grids into a second chamber containing a high voltage cold cathode. These positive ions bombard a surface of the cathode causing the cathode to emit secondary electrons which form an electron beam having a distribution adjacent to the cathode emissive surface substantially the same as the distribution of the ion beam impinging upon the cathode. After passing through the grids and the plasma discharge chamber, the electron beam exits from the electron gun via a foil window. Control of the generated electron beam is achieved by applying a relatively low control voltage between the control grid and the electron gun housing (which resides at ground potential) to control the density of the positive ions bombarding the cathode

  7. Seeing with electrons

    International Nuclear Information System (INIS)

    Nellist, P.

    2006-01-01

    Commercially available lens correctors are extending the reach of electron microscopes to unprecedented atomic scales, as Peter Nellist describes. The electron microscope was invented in 1933 and is based on the principle that electrons have a wavelength that is inversely proportional to their momentum. There are two basic types: transmission electron microscopes and scanning electron microscopes, plus a hybrid of the two. The lenses in an electron microscope are provided by electromagnetic fields, but they suffer from spherical aberration. The addition of octupole and quadrupole corrector fields has improved the resolution of the electron microscope to better than 0.1 nm in the last decade. The next step is to correct for chromatic aberration, after which the resolution of the microscope will probably be limited by the size of the atom itself. (U.K.)

  8. Engineered phages for electronics.

    Science.gov (United States)

    Cui, Yue

    2016-11-15

    Phages are traditionally widely studied in biology and chemistry. In recent years, engineered phages have attracted significant attentions for functionalization or construction of electronic devices, due to their specific binding, catalytic, nucleating or electronic properties. To apply the engineered phages in electronics, these are a number of interesting questions: how to engineer phages for electronics? How are the engineered phages characterized? How to assemble materials with engineered phages? How are the engineered phages micro or nanopatterned? What are the strategies to construct electronics devices with engineered phages? This review will highlight the early attempts to address these questions and explore the fundamental and practical aspects of engineered phages in electronics, including the approaches for selection or expression of specific peptides on phage coat proteins, characterization of engineered phages in electronics, assembly of electronic materials, patterning of engineered phages, and construction of electronic devices. It provides the methodologies and opens up ex-cit-ing op-por-tu-ni-ties for the development of a variety of new electronic materials and devices based on engineered phages for future applications. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. Decal electronics for printed high performance cmos electronic systems

    KAUST Repository

    Hussain, Muhammad Mustafa; Sevilla, Galo Torres; Cordero, Marlon Diaz; Kutbee, Arwa T.

    2017-01-01

    High performance complementary metal oxide semiconductor (CMOS) electronics are critical for any full-fledged electronic system. However, state-of-the-art CMOS electronics are rigid and bulky making them unusable for flexible electronic applications

  10. Electronic Publishing or Electronic Information Handling?

    Science.gov (United States)

    Heck, A.

    The current dramatic evolution in information technology is bringing major modifications in the way scientists communicate. The concept of 'electronic publishing' is too restrictive and has often different, sometimes conflicting, interpretations. It is thus giving way to the broader notion of 'electronic information handling' encompassing the diverse types of information, the different media, as well as the various communication methodologies and technologies. New problems and challenges result also from this new information culture, especially on legal, ethical, and educational grounds. The procedures for validating 'published material' and for evaluating scientific activities will have to be adjusted too. 'Fluid' information is becoming a common concept. Electronic publishing cannot be conceived without link to knowledge bases nor without intelligent information retrieval tools.

  11. Electron transfer in proteins

    DEFF Research Database (Denmark)

    Farver, O; Pecht, I

    1991-01-01

    Electron migration between and within proteins is one of the most prevalent forms of biological energy conversion processes. Electron transfer reactions take place between active centers such as transition metal ions or organic cofactors over considerable distances at fast rates and with remarkable...... specificity. The electron transfer is attained through weak electronic interaction between the active sites, so that considerable research efforts are centered on resolving the factors that control the rates of long-distance electron transfer reactions in proteins. These factors include (in addition......-containing proteins. These proteins serve almost exclusively in electron transfer reactions, and as it turns out, their metal coordination sites are endowed with properties uniquely optimized for their function....

  12. Electrons in Nanostructures

    DEFF Research Database (Denmark)

    Flindt, Christian

    2007-01-01

    in the possibilities o®ered by the quantum mechanical behavior of electrons when it comes to informa- tion processing. This branch of research is also concerned with fundamental questions in physics. Besides an introduction to the above-mentioned subjects, the thesis con- tains a number of contributions to the ¯elds...... of coherent electron manip- ulation and the statistical description of electron transport through nano- devices. The physics of the electrons are described with a combination of numerical methods, developed and applied in the thesis, and more analytical approaches, which are also discussed. The thesis......-based communication. The statistical description of electron transport through nanostructures is based on rate equations, and the primary contribution of the thesis in that respect is the development of a method that allows for the calculation of the distribution of electrons passing through a device. The method...

  13. Transition to electronic publishing

    Science.gov (United States)

    Bowning, Sam

    Previous communications have described some of the many changes that will occur in the next few months as AGU makes the transition to fully electronic publishing. With the advent of the new AGU electronic publishing system, manuscripts will be submitted, edited, reviewed, and published in electronic formats. This piece discusses how the electronic journals will differ from the print journals. Electronic publishing will require some adjustments to the ways we currently think about journals from our perspective of standard print versions. Visiting the Web site of AGU's Geochemistry, Geophysics, Geosystems (G-Cubed) is a great way to get familiar with the look and feel of electronic publishing. However, protocols, especially for citations of articles, are still evolving. Some of the biggest changes for users of AGU publications may be the lack of page numbers, the use of a unique identifier (DOI),and changes in citation style.

  14. Electron microscopy of surfaces

    International Nuclear Information System (INIS)

    Venables, J.A.

    1981-01-01

    Electron beam techniques used to study clean surfaces and surface processes on a microscopic scale are reviewed. Recent experimental examples and possible future developments are discussed. Special emphasis is given to (i) transmission diffraction and microscopy techniques, including atomic imaging; (ii) Auger microscopy on bulk and thin film samples; (iii) secondary electron microscopy, especially low energy secondaries for work-function imaging and photoelectron imaging; and (iv) reflection electron microscopy and diffraction. (orig.)

  15. New electronics stuff chemistry

    International Nuclear Information System (INIS)

    Byeon, Su Il

    2003-04-01

    The first part of this book is about equilibrium electrochemistry on electric thermo dynamic equilibrium state of electrochemistry, crystal defect of solid, thermodynamics on defect electron and election in semiconductor, Gawani potential, volta potential and equilibrium potential and thermodynamics application in Gawani battery. The second part deals with dynamic electrochemistry electrode reaction kinetics and corrosion potential in normal state, diffusion and transport of ion and electron and current impedance spectroscopy. It also mentions industrial electrochemistry and laboratory works in electronics chemistry course.

  16. Ceramic Electron Multiplier

    International Nuclear Information System (INIS)

    Comby, G.

    1996-01-01

    The Ceramic Electron Multipliers (CEM) is a compact, robust, linear and fast multi-channel electron multiplier. The Multi Layer Ceramic Technique (MLCT) allows to build metallic dynodes inside a compact ceramic block. The activation of the metallic dynodes enhances their secondary electron emission (SEE). The CEM can be used in multi-channel photomultipliers, multi-channel light intensifiers, ion detection, spectroscopy, analysis of time of flight events, particle detection or Cherenkov imaging detectors. (auth)

  17. Organizing the Electronic Century

    OpenAIRE

    Richard N. Langlois

    2007-01-01

    This paper's title is an echo of Alfred Chandler's (2001) chronicle of the electronics industry, Inventing the Electronic Century. The paper attempts (A) a general reinterpretation of the pattern of technological advance in (American) electronics over the twentieth century and (B) a somewhat revisionist account of the role of organization and institution in that advance. The paper stresses the complex effects of product architecture and intellectual property regime on industrial organization ...

  18. Introduction to printed electronics

    CERN Document Server

    Suganuma, Katsuaki

    2014-01-01

    This book describes in detail modern technologies for printed electronics, explaining how nanotechnology and modern printing technology are merging to revolutionize electronics fabrication of thin, lightweight, large, and inexpensive products. Readers will benefit from the explanations of materials, devices and circuits used to design and implement the latest applications of printed electronics, such as thin flexible OLED displays, organic solar cells, OLED lighting, smart wallpaper, sensors, logic, memory and more.

  19. Interoperability for electronic ID

    OpenAIRE

    Zygadlo, Zuzanna

    2009-01-01

    Electronic Business, including eBanking, eCommerce and eGovernmental services, is today based on a large variety of security solutions, comprising electronic IDs provided by a broad community of Public Key Infrastructure (PKI) vendors. Significant differences in implementations of those solutions introduce a problem of lack of interoperability in electronic business, which have not yet been resolved by standardization and interoperability initiatives based on existing PKI trust models. It i...

  20. TRANSIENT ELECTRONICS CATEGORIZATION

    Science.gov (United States)

    2017-08-24

    AFRL-RY-WP-TR-2017-0169 TRANSIENT ELECTRONICS CATEGORIZATION Dr. Burhan Bayraktaroglu Devices for Sensing Branch Aerospace Components & Subsystems...SUBTITLE TRANSIENT ELECTRONICS CATEGORIZATION 5a. CONTRACT NUMBER In-house 5b. GRANT NUMBER N/A 5c. PROGRAM ELEMENT NUMBER N/A 6. AUTHOR(S) Dr. Burhan...88ABW-2017-3747, Clearance Date 31 July 2017. Paper contains color. 14. ABSTRACT Transient electronics is an emerging technology area that lacks proper

  1. Introduction to electronics

    CERN Document Server

    Korneff, Theodore

    1966-01-01

    Introduction to Electronics focuses on the study of electronics and electronic devices. Composed of 14 chapters, the book starts with discussions on dc circuits, including resistance, voltmeter, ammeter, galvanometer, internal resistance, and positive and negative currents. This topic is followed by discussions on ac circuits, particularly addressing voltage and current, average power, resistive load, complex plane, and parallel circuits. Discussions also focus on filters and tuned circuits, diodes, and power supplies. Particularly given attention are the processes, diagrams, and analyses

  2. Modern electronic materials

    CERN Document Server

    Watkins, John B

    2013-01-01

    Modern Electronic Materials focuses on the development of electronic components. The book first discusses the history of electronic components, including early developments up to 1900, developments up to World War II, post-war developments, and a comparison of present microelectric techniques. The text takes a look at resistive materials. Topics include resistor requirements, basic properties, evaporated film resistors, thick film resistors, and special resistors. The text examines dielectric materials. Considerations include basic properties, evaporated dielectric materials, ceramic dielectri

  3. Electron-beam lithography

    International Nuclear Information System (INIS)

    Harriott, L.; Liddle, A.

    1997-01-01

    As part of a commemorative series of articles to mark the hundredth anniversary of the discovery of the electron, this article describes the use of electron beams to write features on silicon wafers. Recent advances in electron beam lithography, as it is known, could enable this technology to be used for the mass manufacture of silicon chips. The validation of space-charge optimization and evaluation of printing techniques is underway. (UK)

  4. Electron beam lithography

    International Nuclear Information System (INIS)

    Harriott, L.; Liddle, A.

    1997-01-01

    As part of a commemorative series of articles to mark the hundredth anniversary of the discovery of the electron, this article describes the use of electron beams to write features on silicon wafers. Recent advances in electron beam lithography, as it is known, could enable this technology to be used for the mass manufacture of silicon chips. The validation of space-charge optimization and evaluation of printing techniques is underway. 5 figs

  5. Electron microscopy and diffraction

    International Nuclear Information System (INIS)

    Gjoennes, J.; Olsen, A.

    1986-01-01

    This report is a description of research activities and plans at the electron microscopy laboratorium, Physics Department, University of Oslo. Since the first electron microscope was installed in 1968, the research has covered inorganic structures, physical metallurgy, as well as theory of electron scattering and the development of methods in this field. The current plans involve efforts in the development of crystallographic and spectroscopic methods

  6. The Electronic Notebook Ontology

    OpenAIRE

    Chalk, Stuart

    2016-01-01

    Science is rapidly being brought into the electronic realm and electronic laboratory notebooks (ELN) are a big part of this activity. The representation of the scientific process in the context of an ELN is an important component to making the data recorded in ELNs semantically integrated. This presentation will outline initial developments of an Electronic Notebook Ontology (ENO) that will help tie together the ExptML ontology, HCLS Community Profile data descriptions, and the VIVO-ISF ontol...

  7. Electronics Environmental Benefits Calculator

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Electronics Environmental Benefits Calculator (EEBC) was developed to assist organizations in estimating the environmental benefits of greening their purchase,...

  8. Electronics circuits and systems

    CERN Document Server

    Bishop, Owen

    2007-01-01

    The material in Electronics - Circuits and Systems is a truly up-to-date textbook, with coverage carefully matched to the electronics units of the 2007 BTEC National Engineering and the latest AS and A Level specifications in Electronics from AQA, OCR and WJEC. The material has been organized with a logical learning progression, making it ideal for a wide range of pre-degree courses in electronics. The approach is student-centred and includes: numerous examples and activities; web research topics; Self Test features, highlighted key facts, formulae and definitions. Each chapter ends with a set

  9. High-power electronics

    CERN Document Server

    Kapitsa, Petr Leonidovich

    1966-01-01

    High-Power Electronics, Volume 2 presents the electronic processes in devices of the magnetron type and electromagnetic oscillations in different systems. This book explores the problems of electronic energetics.Organized into 11 chapters, this volume begins with an overview of the motion of electrons in a flat model of the magnetron, taking into account the in-phase wave and the reverse wave. This text then examines the processes of transmission of electromagnetic waves of various polarization and the wave reflection from grids made of periodically distributed infinite metal conductors. Other

  10. The auroral electron accelerator

    International Nuclear Information System (INIS)

    Bryant, D.A.; Hall, D.S.

    1989-01-01

    A model of the auroral electron acceleration process is presented in which the electrons are accelerated resonantly by lower-hybrid waves. The essentially stochastic acceleration process is approximated for the purposes of computation by a deterministic model involving an empirically derived energy transfer function. The empirical function, which is consistent with all that is known of electron energization by lower-hybrid waves, allows many, possibly all, observed features of the electron distribution to be reproduced. It is suggested that the process occurs widely in both space and laboratory plasmas. (author)

  11. Analytical Electron Microscope

    Data.gov (United States)

    Federal Laboratory Consortium — The Titan 80-300 is a transmission electron microscope (TEM) equipped with spectroscopic detectors to allow chemical, elemental, and other analytical measurements to...

  12. Two electron Rydberg states

    International Nuclear Information System (INIS)

    Cooke, W.E.

    1981-01-01

    This paper addresses the study of two-electron Rydberg atoms. With Multichannel Quantum Defect Theory (MQDT), there is a technique for characterizing a spectra in terms of a small number of parameters. A survey of some important effects specific to two-electon Rydberg states, using primarily the alkaline earth atoms for examples, is made. The remainder of the paper deals with a discussion of the electron-electron interaction, including some of the basic points of MQDT. Energy exchange between two electrons is also addressed

  13. Fundamentals of electronics

    CERN Document Server

    Schubert, Thomas F

    2015-01-01

    This book, Electronic Devices and Circuit Application, is the first of four books of a larger work, Fundamentals of Electronics. It is comprised of four chapters describing the basic operation of each of the four fundamental building blocks of modern electronics: operational amplifiers, semiconductor diodes, bipolar junction transistors, and field effect transistors. Attention is focused on the reader obtaining a clear understanding of each of the devices when it is operated in equilibrium. Ideas fundamental to the study of electronic circuits are also developed in the book at a basic level to

  14. Electronic signal conditioning

    CERN Document Server

    NEWBY, BRUCE

    1994-01-01

    At technician level, brief references to signal conditioning crop up in a fragmented way in various textbooks, but there has been no single textbook, until now!More advanced texts do exist but they are more mathematical and presuppose a higher level of understanding of electronics and statistics. Electronic Signal Conditioning is designed for HNC/D students and City & Guilds Electronics Servicing 2240 Parts 2 & 3. It will also be useful for BTEC National, Advanced GNVQ, A-level electronics and introductory courses at degree level.

  15. Electronics pocket book

    CERN Document Server

    Parr, E A

    1981-01-01

    Electronics Pocket Book, Fourth Edition is a nonmathematical presentation of the many varied topics covered by electronics. The book tackles electron physics, electronic components (i.e. resistors, capacitors, and conductors), integrated circuits, and the principles of a.c. and d.c. amplifiers. The text also discusses oscillators, digital circuits, digital computers, and optoelectronics (i.e., sensors, emitters, and devices that utilize light). Communications (such as line and radio communications, transmitters, receivers, and digital techniques); the principles and examples of servosystems; a

  16. Electron beam welding

    International Nuclear Information System (INIS)

    Schwartz, M.M.

    1974-01-01

    Electron-beam equipment is considered along with fixed and mobile electron-beam guns, questions of weld environment, medium and nonvacuum welding, weld-joint designs, tooling, the economics of electron-beam job shops, aspects of safety, quality assurance, and repair. The application of the process in the case of individual materials is discussed, giving attention to aluminum, beryllium, copper, niobium, magnesium, molybdenum, tantalum, titanium, metal alloys, superalloys, and various types of steel. Mechanical-property test results are examined along with the areas of application of electron-beam welding

  17. Flying Electronic Warfare Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Provides NP-3D aircraft host platforms for Effectiveness of Navy Electronic Warfare Systems (ENEWS) Program antiship missile (ASM) seeker simulators used...

  18. Free electron laser

    International Nuclear Information System (INIS)

    Ortega, J.M.; Billardon, M.

    1986-01-01

    Operation principle of a laser and an oscillator are recalled together with the klystron one. In the free electron laser, electrons go through an undulator or an optical klystron. Principles of the last one are given. The two distinct ways of producing coherent radiation with an undulator and an optical klystron are presented. The first one is the use of the free electron laser, the second is to make use of the spontaneous emission generation (harmonics generation). The different current types of free electron lasers are presented (Stanford, Los Alamos, Aco at Orsay). Prospects and applications are given in conclusion [fr

  19. Electronic circuits fundamentals & applications

    CERN Document Server

    Tooley, Mike

    2015-01-01

    Electronics explained in one volume, using both theoretical and practical applications.New chapter on Raspberry PiCompanion website contains free electronic tools to aid learning for students and a question bank for lecturersPractical investigations and questions within each chapter help reinforce learning Mike Tooley provides all the information required to get to grips with the fundamentals of electronics, detailing the underpinning knowledge necessary to appreciate the operation of a wide range of electronic circuits, including amplifiers, logic circuits, power supplies and oscillators. The

  20. Flexible Electronics Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Flexible Electronics Research Facility designs, synthesizes, tests, and fabricates materials and devices compatible with flexible substrates for Army information...

  1. Electronics circuits and systems

    CERN Document Server

    Bishop, Owen

    2011-01-01

    The material in Electronics - Circuits and Systems is a truly up-to-date textbook, with coverage carefully matched to the electronics units of the 2007 BTEC National Engineering and the latest AS and A Level specifications in Electronics from AQA, OCR and WJEC. The material has been organized with a logical learning progression, making it ideal for a wide range of pre-degree courses in electronics. The approach is student-centred and includes: numerous examples and activities; web research topics; Self Test features, highlighted key facts, formulae and definitions. Ea

  2. Electrons in water radiolysis

    International Nuclear Information System (INIS)

    Laverne, J.A.; Pimblott, S.M.

    2006-01-01

    The hydrated electron is the main reducing species produced in the radiolysis of water. Many studies have examined its reactivity using pulsed radiolysis techniques and competition kinetics. Data bases list hundreds of rate coefficients for reaction of the hydrated electron with substances ranging from inorganic ions like nitrate to biopolymers like DNA. Although the chemistry of the hydrated electron is often examined, its mechanism of formation and variation in yield are considerable less known, especially under extreme conditions such as in high temperature water or with heavy ion radiolysis. This work will examine various aspects of the radiation chemistry of the hydrated electron beginning with the generation of secondary electrons in primary energy loss events during the passage of ionizing radiation to the radiolytic yields of the hydrated electron produced by different types of radiation. Ion radiation is a 'white light source.' Energy losses range from the minimum excitation energy of the medium up to the kinematic maximum determined by the collision parameters. However, certain energy loss events are more probable than others. The dipole oscillator strength distributions of media essentially give the probability of energy loss events in collisions with no momentum transfer. Dipole oscillator distributions have been constructed from experimental data for a wide variety of materials including all the phases of water. Calculations using cross sections based on dipole oscillator distributions show that the most probable energy loss event in water is only about 20 eV with an average value closer to 60 eV. The preponderance of energy loss events of less than 100 eV means that many low energy electrons are formed by the passage of a single ion. Low energy electrons have short mean free paths and they remain in the vicinity of the primary energy loss events. The spatial distribution of these low energy electrons defines the radial track structure of the incident

  3. INDRA. Electronic Architecture

    International Nuclear Information System (INIS)

    Ganil Team.

    1993-01-01

    The INDRA multidetector electronics is described. The system is a set of 17 rings consisting of 96 ionization chambers and 180 silicon detectors plus 324 cesium iodide and 12 Phoswich scintillators. Their integrated electronic lines, the trigger modules, the control and data acquisition units are presented briefly. (R.P.) 6 figs

  4. Recycling of electronic scrap

    DEFF Research Database (Denmark)

    Legarth, Jens Brøbech

    This Ph.D. thesis deals with the growingly important field of electronics recycling with special attention to the problem of printed circuit board recycling. A literature survey of contemporary electronics recycling and printed circuit board recycling is presented.Further, an analysis of the role...

  5. Cooling of electronic equipment

    DEFF Research Database (Denmark)

    A. Kristensen, Anders Schmidt

    2003-01-01

    Cooling of electronic equipment is studied. The design size of electronic equipment decrease causing the thermal density to increase. This affect the cooling which can cause for example failures of critical components due to overheating or thermal induced stresses. Initially a pin fin heat sink...

  6. Scanning electron microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Cox, B. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada)

    1970-05-15

    The JSM-11 scanning electron microscope at CRNL has been used extensively for topographical studies of oxidized metals, fracture surfaces, entomological and biological specimens. A non-dispersive X-ray attachment permits the microanalysis of the surface features. Techniques for the production of electron channeling patterns have been developed. (author)

  7. Electron scattering from tetrahydrofuran

    International Nuclear Information System (INIS)

    Fuss, M C; Sanz, A G; García, G; Muñoz, A; Oller, J C; Blanco, F; Do, T P T; Brunger, M J; Almeida, D; Limão-Vieira, P

    2012-01-01

    Electron scattering from Tetrahydrofuran (C 4 H 8 O) was investigated over a wide range of energies. Following a mixed experimental and theoretical approach, total scattering, elastic scattering and ionization cross sections as well as electron energy loss distributions were obtained.

  8. Paradoxes of unstable electron

    International Nuclear Information System (INIS)

    Okun, L.B.; Zeldovich, Ya.B.

    1978-01-01

    The hypothesis that electron is unstable - when it is consistent with the vanishing mass of the photon- leads to a number of paradoxical statements. The lifetime of the electron is determined by emission of a huge number of longitudinal photons and exponentially depends on the amount of emitted energy. This suggests to discuss searches for charge nonconservation in experiments with high energy particles

  9. Electron scattering violates parity

    CERN Multimedia

    2004-01-01

    Parity violation has been observed in collisions between electrons at the Stanford Linear Accelerator Center (SLAC) in the US. The resuls, which are in agreement with the Stanford Model of particle physics, also provide a new measurement of the weak charge of the electron (½ page)

  10. Electronically Controlled Resistor Bank

    Science.gov (United States)

    Ross, Walter L.

    1987-01-01

    Resistance quickly varied in small steps over wide range. Device with no moving parts provides variable electrical resistance. Used with analog or digital circuity to provide electronic selection of large number of resistance values for testing, simulation, control, or other purposes. Nearest electromechanical equivalent of all-electronic device is potentiometer driven by servomotor.

  11. Voltmeter with Compton electrons

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, N R; Gorbics, S G; Weidenheimer, D M [Berkeley Research Associates, Springfield, VA (United States)

    1997-12-31

    A technique to measure the electron end point energy of bremsstrahlung in the MV regime using only two detectors is described. One of the detector measures the total radiation, the other filters out all except the hardest photons by looking only at their Compton electrons, whose average energy is determined with a magnetic field. (author). 4 figs., 2 refs.

  12. Advances in Opto Electronics

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Advances in Opto Electronics. Optoelectronics is where electronics was 15 years back. All Optical Amplifiers and Semiconductor Amplifiers. Fastest Semiconductor (InP) switch is at 170GHz- where is terrabit ? MEMS based switches that route traffic at wavelength level ...

  13. Electron beam welding

    International Nuclear Information System (INIS)

    Gabbay, M.

    1972-01-01

    The bead characteristics and the possible mechanisms of the electron beam penetration are presented. The different welding techniques are exposed and the main parts of an electron beam welding equipment are described. Some applications to nuclear, spatial and other industries are cited [fr

  14. Electron beam simulation applicators

    International Nuclear Information System (INIS)

    Purdy, J.A.

    1983-01-01

    A system for simulating electron beam treatment portals using low-temperature melting point alloy is described. Special frames having the same physical dimensions as the electron beam applicators used on the Varian Clinac 20 linear accelerator were designed and constructed

  15. Radiative electron capture

    International Nuclear Information System (INIS)

    Biggerstaff, J.A.; Appleton, B.R.; Datz, S.; Moak, C.D.; Neelavathi, V.N.; Noggle, T.S.; Ritchie, R.H.; VerBeek, H.

    1975-01-01

    Some data are presented for radiative electron capture by fast moving ions. The radiative electron capture spectrum is shown for O 8+ in Ag, along with the energy dependence of the capture cross-section. A discrepancy between earlier data, theoretical prediction, and the present data is pointed out. (3 figs) (U.S.)

  16. Electronics and Lithuanian Terminology

    Directory of Open Access Journals (Sweden)

    Stasys Zajankauskas

    2011-04-01

    Full Text Available It is found that the vacuum triode, transistor, monolithic circuit and microprocessor were the most important inventions of traditional electronics. Thus, the origins of the traditional electronics should be associated with the invention of the vacuum triode, but not with the invention of vacuum diode. It is shown that the science of electronics is not as young as computer science or up-to-date information technologies: electronics, including active electronics, had already celebrated the centenary, and the period of 2004–2008 is the period of numerous already solid jubilees. Thus, the terminology of electronics is not at initial stage of evolution as well – general terms should be already systematized and normalized. However, Lithuanian terms for electronic devices invented before tens of years and terms for old-defined notions associated with these devices are still varying, some are worsened. Especially, the incorrectly motivated terms used for variations of transistors and microcircuits are analyzed in the article. It is motivated which terms are preferable, systematic and exact. The paper is dedicated to the 50th anniversary of monolithic circuit, as well as the 60th anniversary of transistor, the 40th jubilee of microprocessor and centenary of electronics.

  17. Electron tunneling in chemistry

    International Nuclear Information System (INIS)

    Zamaraev, K.I.; Khajrutdinov, R.F.; Zhdanov, V.P.; Molin, Yu.N.

    1985-01-01

    Results of experimental and theoretical investigations are outlined systematically on electron tunnelling in chemical reactions. Mechanism of electron transport to great distances is shown to be characteristic to chemical compounds of a wide range. The function of tunnel reactions is discussed for various fields of chemistry, including radiation chemistry, electrochemistry, chemistry of solids, chemistry of surface and catalysis

  18. Managing electronic records

    CERN Document Server

    McLeod, Julie

    2005-01-01

    For records management courses, this book covers the theory and practice of managing electronic records as business and information assets. It focuses on the strategies, systems and procedures necessary to ensure that electronic records are appropriately created, captured, organized and retained over time to meet business and legal requirements.

  19. ELECTRON COOLING FOR RHIC

    International Nuclear Information System (INIS)

    BEN-ZVI, I.; AHRENS, L.; BRENNAN, M.; HARRISON, M.; KEWISCH, J.; MACKAY, W.; PEGGS, S.; ROSER, T.; SATOGATA, T.; TRBOJEVIC, D.; YAKIMENKO, V.

    2001-01-01

    We introduce plans for electron-cooling of the Relativistic Heavy Ion Collider (RHIC). This project has a number of new features as electron coolers go: It will cool 100 GeV/nucleon ions with 50 MeV electrons; it will be the first attempt to cool a collider at storage-energy; and it will be the first cooler to use a bunched beam and a linear accelerator as the electron source. The linac will be superconducting with energy recovery. The electron source will be based on a photocathode gun. The project is carried out by the Collider-Accelerator Department at BNL in collaboration with the Budker Institute of Nuclear Physics

  20. Electron - proton colliders

    International Nuclear Information System (INIS)

    Wiik, B.H.

    1985-01-01

    Electron-proton storage rings allow us to study the interaction between the two basic constituents of matter, electrons and quarks at very short distances. Such machines were first discussed in connection with the ISR but the idea was abandoned because of the anticipated low counting rate. The interest in electron-proton storage rings was rekindeled by the discovery of large pointlike cross sections in lepton-hardon interactions and several/sup 2-15/ projects have been discussed during the past decade. However, despite a glorious past, which includes the discovery of quarks and neutral currents, and a multitude of proposals no electron-proton storage ring has ever been built. What we might learn by studying electron-proton collisions at high energies is discussed. After some brief comments on present proposals the proposed DESY ep project HERA is described as an example of how to realize such a machine

  1. Electron: Cluster interactions

    International Nuclear Information System (INIS)

    Scheidemann, A.A.; Knight, W.D.

    1994-02-01

    Beam depletion spectroscopy has been used to measure absolute total inelastic electron-sodium cluster collision cross sections in the energy range from E ∼ 0.1 to E ∼ 6 eV. The investigation focused on the closed shell clusters Na 8 , Na 20 , Na 40 . The measured cross sections show an increase for the lowest collision energies where electron attachment is the primary scattering channel. The electron attachment cross section can be understood in terms of Langevin scattering, connecting this measurement with the polarizability of the cluster. For energies above the dissociation energy the measured electron-cluster cross section is energy independent, thus defining an electron-cluster interaction range. This interaction range increases with the cluster size

  2. Practical electronics for inventors

    CERN Document Server

    Scherz, Paul

    2013-01-01

    Spark your creativity and gain the electronics skills required to transform your innovative ideas into functioning gadgets. This hands-on, updated guide outlines electrical principles and provides thorough, easy-to-follow instructions, schematics, and illustrations. Findout how to select components, safely assemble circuits, perform error tests, and build plug-and-play prototypes. Practical Electronics for Inventors, Third Edition, features all-new chapters on sensors, microcontrollers, modular electronics, and the latest software tools. Coverage includes: Resistors, capacitors, inductors, and transformers Diodes, transistors, and integrated circuits Optoelectronics, solar cells, and phototransistors Sensors, GPS modules, and touch screens Op amps, regulators, and power supplies Digital electronics, LCD displays, and logic gates Microcontrollers and prototyping platforms, including Arduino DC motors, RC servos, and stepper motors Microphones, audio amps, and speakers Modular electronics and prototyping.

  3. Electronically cloaked nanoparticles

    Science.gov (United States)

    Shen, Wenqing

    The concept of electronic cloaking is to design objects invisible to conduction electrons. The approach of electronic cloaking has been recently suggested to design invisible nanoparticle dopants with electronic scattering cross section smaller than 1% of the physical cross section (pi a2), and therefore to enhance the carrier mobility of bulk materials. The proposed nanoparticles have core-shell structures. The dopants are incorporated inside the core, while the shell layer serves both as a spacer to separate the charge carriers from their parent atoms and as a cloaking shell to minimize the scattering cross section of the electrons from the ionized nanoparticles. Thermoelectric materials are usually highly doped to have enough carrier density. Using invisible dopants could achieve larger thermoelectric power factors by enhancing the electronic mobility. Core-shell nanoparticles show an advantage over one-layer nanoparticles, which are proposed in three-dimensional modulation doping. However designing such nanoparticles is not easy as there are too many parameters to be considered. This thesis first shows an approach to design hollow nanoparticles by applying constrains on variables. In the second part, a simple mapping approach is introduced where one can identify possible core-shell particles by comparing the dimensionless parameters of chosen materials with provided maps. In both parts of this work, several designs with realistic materials were made and proven to achieve electronic cloaking. Improvement in the thermoelectric power factor compared to the traditional impurity doping method was demonstrated in several cases.

  4. Electron Cooling of RHIC

    CERN Document Server

    Ben-Zvi, Ilan; Barton, Donald; Beavis, Dana; Blaskiewicz, Michael; Bluem, Hans; Brennan, Joseph M; Bruhwiler, David L; Burger, Al; Burov, Alexey; Burrill, Andrew; Calaga, Rama; Cameron, Peter; Chang, Xiangyun; Cole, Michael; Connolly, Roger; Delayen, Jean R; Derbenev, Yaroslav S; Eidelman, Yury I; Favale, Anthony; Fedotov, Alexei V; Fischer, Wolfram; Funk, L W; Gassner, David M; Hahn, Harald; Harrison, Michael; Hershcovitch, Ady; Holmes, Douglas; Hseuh Hsiao Chaun; Johnson, Peter; Kayran, Dmitry; Kewisch, Jorg; Kneisel, Peter; Koop, Ivan; Lambiase, Robert; Litvinenko, Vladimir N; MacKay, William W; Mahler, George; Malitsky, Nikolay; McIntyre, Gary; Meng, Wuzheng; Merminga, Lia; Meshkov, Igor; Mirabella, Kerry; Montag, Christoph; Nagaitsev, Sergei; Nehring, Thomas; Nicoletti, Tony; Oerter, Brian; Parkhomchuk, Vasily; Parzen, George; Pate, David; Phillips, Larry; Preble, Joseph P; Rank, Jim; Rao, Triveni; Rathke, John; Roser, Thomas; Russo, Thomas; Scaduto, Joseph; Schultheiss, Tom; Sekutowicz, Jacek; Shatunov, Yuri; Sidorin, Anatoly O; Skrinsky, Aleksander Nikolayevich; Smirnov, Alexander V; Smith, Kevin T; Todd, Alan M M; Trbojevic, Dejan; Troubnikov, Grigory; Wang, Gang; Wei, Jie; Williams, Neville; Wu, Kuo-Chen; Yakimenko, Vitaly; Zaltsman, Alex; Zhao, Yongxiang; ain, Animesh K

    2005-01-01

    We report progress on the R&D program for electron-cooling of the Relativistic Heavy Ion Collider (RHIC). This electron cooler is designed to cool 100 GeV/nucleon at storage energy using 54 MeV electrons. The electron source will be a superconducting RF photocathode gun. The accelerator will be a superconducting energy recovery linac. The frequency of the accelerator is set at 703.75 MHz. The maximum electron bunch frequency is 9.38 MHz, with bunch charge of 20 nC. The R&D program has the following components: The photoinjector and its photocathode, the superconducting linac cavity, start-to-end beam dynamics with magnetized electrons, electron cooling calculations including benchmarking experiments and development of a large superconducting solenoid. The photoinjector and linac cavity are being incorporated into an energy recovery linac aimed at demonstrating ampere class current at about 20 MeV. A Zeroth Order Design Report is in an advanced draft state, and can be found on the web at http://www.ags...

  5. Coherent electron cooling

    Energy Technology Data Exchange (ETDEWEB)

    Litvinenko,V.

    2009-05-04

    Cooling intense high-energy hadron beams remains a major challenge in modern accelerator physics. Synchrotron radiation is still too feeble, while the efficiency of two other cooling methods, stochastic and electron, falls rapidly either at high bunch intensities (i.e. stochastic of protons) or at high energies (e-cooling). In this talk a specific scheme of a unique cooling technique, Coherent Electron Cooling, will be discussed. The idea of coherent electron cooling using electron beam instabilities was suggested by Derbenev in the early 1980s, but the scheme presented in this talk, with cooling times under an hour for 7 TeV protons in the LHC, would be possible only with present-day accelerator technology. This talk will discuss the principles and the main limitations of the Coherent Electron Cooling process. The talk will describe the main system components, based on a high-gain free electron laser driven by an energy recovery linac, and will present some numerical examples for ions and protons in RHIC and the LHC and for electron-hadron options for these colliders. BNL plans a demonstration of the idea in the near future.

  6. Dose calculation for electrons

    International Nuclear Information System (INIS)

    Hirayama, Hideo

    1995-01-01

    The joint working group of ICRP/ICRU is advancing the works of reviewing the ICRP publication 51 by investigating the data related to radiation protection. In order to introduce the 1990 recommendation, it has been demanded to carry out calculation for neutrons, photons and electrons. As for electrons, EURADOS WG4 (Numerical Dosimetry) rearranged the data to be calculated at the meeting held in PTB Braunschweig in June, 1992, and the question and request were presented by Dr. J.L. Chartier, the responsible person, to the researchers who are likely to undertake electron transport Monte Carlo calculation. The author also has carried out the requested calculation as it was the good chance to do the mutual comparison among various computation codes regarding electron transport calculation. The content that the WG requested to calculate was the absorbed dose at depth d mm when parallel electron beam enters at angle α into flat plate phantoms of PMMA, water and ICRU4-element tissue, which were placed in vacuum. The calculation was carried out by the versatile electron-photon shower computation Monte Carlo code, EGS4. As the results, depth dose curves and the dependence of absorbed dose on electron energy, incident angle and material are reported. The subjects to be investigated are pointed out. (K.I.)

  7. Polarized electron sources

    International Nuclear Information System (INIS)

    Prepost, R.

    1994-01-01

    The fundamentals of polarized electron sources are described with particular application to the Stanford Linear Accelerator Center. The SLAC polarized electron source is based on the principle of polarized photoemission from Gallium Arsenide. Recent developments using epitaxially grown, strained Gallium Arsenide cathodes have made it possible to obtain electron polarization significantly in excess of the conventional 50% polarization limit. The basic principles for Gallium and Arsenide polarized photoemitters are reviewed, and the extension of the basic technique to strained cathode structures is described. Results from laboratory measurements of strained photocathodes as well as operational results from the SLAC polarized source are presented

  8. Electronic devices and circuits

    CERN Document Server

    Pridham, Gordon John

    1968-01-01

    Electronic Devices and Circuits, Volume 1 deals with the design and applications of electronic devices and circuits such as passive components, diodes, triodes and transistors, rectification and power supplies, amplifying circuits, electronic instruments, and oscillators. These topics are supported with introductory network theory and physics. This volume is comprised of nine chapters and begins by explaining the operation of resistive, inductive, and capacitive elements in direct and alternating current circuits. The theory for some of the expressions quoted in later chapters is presented. Th

  9. Electron collisions with biomolecules

    International Nuclear Information System (INIS)

    McKoy, V; Winstead, C

    2008-01-01

    We report on results of recent studies of collisions of low-energy electrons with nucleobases and other DNA constituents. A particular focus of these studies has been the identification and characterization of resonances that play a role in electron attachment leading to strand breaks in DNA. Comparison of the calculated resonance positions with results of electron transmission measurements is quite encouraging. However, the higher-lying π* resonances of the nucleobases appear to be of mixed elastic and core-excited character. Such resonant channel coupling raises the interesting possibility that the higher π*resonances in the nucleobases may promote dissociation of DNA by providing doorway states to triplet excited states.

  10. Field emission electronics

    CERN Document Server

    Egorov, Nikolay

    2017-01-01

    This book is dedicated to field emission electronics, a promising field at the interface between “classic” vacuum electronics and nanotechnology. In addition to theoretical models, it includes detailed descriptions of experimental and research techniques and production technologies for different types of field emitters based on various construction principles. It particularly focuses on research into and production of field cathodes and electron guns using recently developed nanomaterials and carbon nanotubes. Further, it discusses the applications of field emission cathodes in new technologies such as light sources, flat screens, microwave and X-ray devices.

  11. Quantum electronics basic theory

    CERN Document Server

    Fain, V M; Sanders, J H

    1969-01-01

    Quantum Electronics, Volume 1: Basic Theory is a condensed and generalized description of the many research and rapid progress done on the subject. It is translated from the Russian language. The volume describes the basic theory of quantum electronics, and shows how the concepts and equations followed in quantum electronics arise from the basic principles of theoretical physics. The book then briefly discusses the interaction of an electromagnetic field with matter. The text also covers the quantum theory of relaxation process when a quantum system approaches an equilibrium state, and explai

  12. Power Electronics for Microgrids

    DEFF Research Database (Denmark)

    Dragicevic, Tomislav; Blaabjerg, Frede

    2016-01-01

    A microgrid (MG) is a stand-alone or grid-connected hybrid renewable system that uses distributed renewable and nonrenewable energy sources and energy storage systems (ESSs) to supply power to local loads. The system is ordinarily based on power electronics, with interface converters allowing...... a continuous supply of power in the presence of variable RES production. This chapter describes some specific features of DC MGs in terms of power architecture, control, and protection. It also reviews several uncommon power electronic interfaces. Regarding control, operation without critical communication...... are explained in this chapter. The chapter concludes with a review of power electronic intensive protection solutions for DC MGs....

  13. Polarized electron sources

    Energy Technology Data Exchange (ETDEWEB)

    Prepost, R. [Univ. of Wisconsin, Madison, WI (United States)

    1994-12-01

    The fundamentals of polarized electron sources are described with particular application to the Stanford Linear Accelerator Center. The SLAC polarized electron source is based on the principle of polarized photoemission from Gallium Arsenide. Recent developments using epitaxially grown, strained Gallium Arsenide cathodes have made it possible to obtain electron polarization significantly in excess of the conventional 50% polarization limit. The basic principles for Gallium and Arsenide polarized photoemitters are reviewed, and the extension of the basic technique to strained cathode structures is described. Results from laboratory measurements of strained photocathodes as well as operational results from the SLAC polarized source are presented.

  14. BEPCII electronic logbook system

    International Nuclear Information System (INIS)

    Liu Shu; Zhao Jijiu; Wang Chunhong

    2007-01-01

    According to demands of BEPCII construction and future operation, we are going to supply an open electronic logbook platform for people to record their message in developing and running BEPCII, and browse the log-book on website. That gives people an open and transparent logbook, rather than traditional paper notebook. With the template of DESY's Elogbook, the BEPCII electronic logbook was developed, using the popular JSP technology to develop dynamic Web applications. This paper will introduce the development of BEPCII electronic logbook system. (authors)

  15. Electronic components and systems

    CERN Document Server

    Dennis, W H

    2013-01-01

    Electronic Components and Systems focuses on the principles and processes in the field of electronics and the integrated circuit. Covered in the book are basic aspects and physical fundamentals; different types of materials involved in the field; and passive and active electronic components such as capacitors, inductors, diodes, and transistors. Also covered in the book are topics such as the fabrication of semiconductors and integrated circuits; analog circuitry; digital logic technology; and microprocessors. The monograph is recommended for beginning electrical engineers who would like to kn

  16. A simple electron multiplexer

    International Nuclear Information System (INIS)

    Dobrzynski, L; Akjouj, A; Djafari-Rouhani, B; Al-Wahsh, H; Zielinski, P

    2003-01-01

    We present a simple multiplexing device made of two atomic chains coupled by two other transition metal atoms. We show that this simple atomic device can transfer electrons at a given energy from one wire to the other, leaving all other electron states unaffected. Closed-form relations between the transmission coefficients and the inter-atomic distances are given to optimize the desired directional electron ejection. Such devices can be adsorbed on insulating substrates and characterized by current surface technologies. (letter to the editor)

  17. Electron paramagnetic resonance

    CERN Document Server

    Al'tshuler, S A

    2013-01-01

    Electron Paramagnetic Resonance is a comprehensive text on the field of electron paramagnetic resonance, covering both the theoretical background and the results of experiment. This book is composed of eight chapters that cover theoretical materials and experimental data on ionic crystals, since these are the materials that have been most extensively studied by the methods of paramagnetic resonance. The opening chapters provide an introduction to the basic principles of electron paramagnetic resonance and the methods of its measurement. The next chapters are devoted to the theory of spectra an

  18. Semiconductor opto-electronics

    CERN Document Server

    Moss, TS; Ellis, B

    1972-01-01

    Semiconductor Opto-Electronics focuses on opto-electronics, covering the basic physical phenomena and device behavior that arise from the interaction between electromagnetic radiation and electrons in a solid. The first nine chapters of this book are devoted to theoretical topics, discussing the interaction of electromagnetic waves with solids, dispersion theory and absorption processes, magneto-optical effects, and non-linear phenomena. Theories of photo-effects and photo-detectors are treated in detail, including the theories of radiation generation and the behavior of semiconductor lasers a

  19. Auger electron spectroscopy

    International Nuclear Information System (INIS)

    Gopalaraman, C.P.

    1975-01-01

    General features of electron excited Auger electron spectroscopy (AES) which is a nondestructive technique for the analysis of surfaces upto about 15 Adeg depth with a detection limit of about 0.1% of a monolayer. Methods of measuring the Auger electron energies and recent improvements in the instrumentation are reviewed. Typical energy resolution is found to be about 0.5% which is specially suited for the detection of light elements. It is widely used in metallurgy, surface chemistry and thin film studies. (K.B.)

  20. Modern dictionary of electronics

    CERN Document Server

    Graf, Rudolf F

    1999-01-01

    Included in this fully revised classic are well over 28,000 terms, phrases, acronyms, and abbreviations from the ever-expanding worlds of consumer electronics, optics, microelectronics, computers, communications, and medical electronics. From the basic elements of theory to the most cutting-edge circuit technology, this book explains it all in both words and pictures.For easy reference, the author has provided definitions for standard abbreviations and equations as well as tables of SI (International System of Units) units, measurements, and schematic symbolsModern Dictionary of Electronics is

  1. VLSI electronics microstructure science

    CERN Document Server

    1982-01-01

    VLSI Electronics: Microstructure Science, Volume 4 reviews trends for the future of very large scale integration (VLSI) electronics and the scientific base that supports its development.This book discusses the silicon-on-insulator for VLSI and VHSIC, X-ray lithography, and transient response of electron transport in GaAs using the Monte Carlo method. The technology and manufacturing of high-density magnetic-bubble memories, metallic superlattices, challenge of education for VLSI, and impact of VLSI on medical signal processing are also elaborated. This text likewise covers the impact of VLSI t

  2. Single Electron Tunneling

    International Nuclear Information System (INIS)

    Ruggiero, Steven T.

    2005-01-01

    Financial support for this project has led to advances in the science of single-electron phenomena. Our group reported the first observation of the so-called ''Coulomb Staircase'', which was produced by tunneling into ultra-small metal particles. This work showed well-defined tunneling voltage steps of width e/C and height e/RC, demonstrating tunneling quantized on the single-electron level. This work was published in a now well-cited Physical Review Letter. Single-electron physics is now a major sub-field of condensed-matter physics, and fundamental work in the area continues to be conducted by tunneling in ultra-small metal particles. In addition, there are now single-electron transistors that add a controlling gate to modulate the charge on ultra-small photolithographically defined capacitive elements. Single-electron transistors are now at the heart of at least one experimental quantum-computer element, and single-electron transistor pumps may soon be used to define fundamental quantities such as the farad (capacitance) and the ampere (current). Novel computer technology based on single-electron quantum dots is also being developed. In related work, our group played the leading role in the explanation of experimental results observed during the initial phases of tunneling experiments with the high-temperature superconductors. When so-called ''multiple-gap'' tunneling was reported, the phenomenon was correctly identified by our group as single-electron tunneling in small grains in the material. The main focus throughout this project has been to explore single electron phenomena both in traditional tunneling formats of the type metal/insulator/particles/insulator/metal and using scanning tunneling microscopy to probe few-particle systems. This has been done under varying conditions of temperature, applied magnetic field, and with different materials systems. These have included metals, semi-metals, and superconductors. Amongst a number of results, we have

  3. Consulting in Electronic Commerce

    Directory of Open Access Journals (Sweden)

    Florentina Loredana Tache

    2010-10-01

    Full Text Available Economic development of electronic services provide advice and many agents of existingreferral systems to recommend and provide products, information and customized views of thecommunity through a personalized interaction in real time. Distributed systems of autonomous agentsare becoming increasingly important in electronic comet because the basic decisions of agents adviceon trust and reputation are taken in a similar way human society. If these decisions will be as a realconsumer protection, when new aspects of online consumer legislation will become usefulinformation in advice and consulting of electronic commerce.

  4. Coding for Electronic Mail

    Science.gov (United States)

    Rice, R. F.; Lee, J. J.

    1986-01-01

    Scheme for coding facsimile messages promises to reduce data transmission requirements to one-tenth current level. Coding scheme paves way for true electronic mail in which handwritten, typed, or printed messages or diagrams sent virtually instantaneously - between buildings or between continents. Scheme, called Universal System for Efficient Electronic Mail (USEEM), uses unsupervised character recognition and adaptive noiseless coding of text. Image quality of resulting delivered messages improved over messages transmitted by conventional coding. Coding scheme compatible with direct-entry electronic mail as well as facsimile reproduction. Text transmitted in this scheme automatically translated to word-processor form.

  5. The art of electronics

    CERN Document Server

    Horowitz, Paul

    2015-01-01

    At long last, here is the thoroughly revised and updated third edition of the hugely successful Art of Electronics. It is widely accepted as the best single authoritative book on electronic circuit design. In addition to new or enhanced coverage of many topics, the Third Edition includes: 90 oscilloscope screenshots illustrating the behavior of working circuits; dozens of graphs giving highly useful measured data of the sort that's often buried or omitted in datasheets but which you need when designing circuits; 80 tables (listing some 1650 active components), enabling intelligent choice of circuit components by listing essential characteristics (both specified and measured) of available parts. The new Art of Electronics ​​retains the feeling of informality and easy access that helped make the earlier editions so successful and popular. It is an indispensable reference and the gold standard​​ for anyone, student or researcher, professional or amateur, who works with electronic circuits.

  6. Electron and Photon ID

    CERN Document Server

    Hryn'ova, Tetiana; The ATLAS collaboration

    2017-01-01

    The identification of prompt photons and the rejection of background coming mostly from photons from hadron decays relies on the high granularity of the ATLAS calorimeter. The electron identification used in ATLAS for run 2 is based on a likelihood discrimination to separate isolated electron candidates from candidates originating from photon conversions, hadron misidentification and heavy flavor decays. In addition, isolation variables are used as further handles to separate signal and background. Several methods are used to measure with data the efficiency of the photon identification requirements, to cover a broad energy spectrum. At low energy, photons from radiative Z decays are used. In the medium energy range, similarities between electrons and photon showers are exploited using Z->ee decays. At high energy, inclusive photon samples are used. The measurement of the efficiencies of the electron identification and isolation cuts are performed with the data using tag and probe techniques with large statis...

  7. Channel electron multipliers

    International Nuclear Information System (INIS)

    Seidman, A.; Avrahami, Z.; Sheinfux, B.; Grinberg, J.

    1976-01-01

    A channel electron multiplier is described having a tubular wall coated with a secondary-electron emitting material and including an electric field for accelerating the electrons, the electric field comprising a plurality of low-resistive conductive rings each alternating with a high-resistive insulating ring. The thickness of the low-resistive rings is many times larger than that of the high-resistive rings, being in the order of tens of microns for the low-resistive rings and at least one order of magnitude lower for the high-resistive rings; and the diameter of the channel tubular walls is also many times larger than the thickness of the high-resistive rings. Both single-channel and multiple-channel electron multipliers are described. A very important advantage, particularly in making multiple-channel multipliers, is the simplicity of the procedure that may be used in constructing such multipliers. Other operational advantages are described

  8. Typewriting by Electronics

    Science.gov (United States)

    Etier, Faborn

    1971-01-01

    By using the electronic typewriting teaching aid, it is believed by those closely associated with its use in teaching typing that as much can be accomplished in one semester as in two semesters using the conventional method of teaching. (Editor)

  9. Electron identification at CDF

    International Nuclear Information System (INIS)

    Kim, Shinhong

    1990-01-01

    Electron identification at CDF is performed using the information of lateral and longitudinal shower spread, the track-cluster position match and the energy-momentum match. The tracking chamber with a solenoidal magnetic field at CDF is powerful for rejecting the backgrounds such as the π ± - π 0 overlaps, the π 0 /γ conversions and interactive π ± in electromagnetic calorimeter: The energy- momentum match cut can decrease the background due to the π ± - π 0 overlaps for non-isolated electrons with Et above 10 GeV by a factor of 20. The conversion electrons are identified using track information with an efficiency of 80 ± 3%. The charge of electrons from W decay can be determined in the pseudorapidity range of |η| < 1.7 at CDF. The charge determination is useful for background estimation of Drell-Yan physics and heavy flavor physics. 5 refs., 5 figs

  10. The electron accelerator Ridgetron

    International Nuclear Information System (INIS)

    Hayashizaki, N.; Hattori, T.; Odera, M.; Fujisawa, T.

    1999-01-01

    Many electron accelerators of DC or RF type have been widely used for electron beam irradiation (curing, crosslinking of polymers, sterilization of medical disposables, preservation of food, etc.). Regardless of the acceleration energy, the accelerators to be installed in industrial facilities, have to satisfy the requires of compact size, low power consumption and stable operation. The DC accelerator is realized very compact in the energy under 300 keV, however, it is large to prevent the discharge of an acceleration column in the energy over 300 keV. The RF electron accelerator Ridgetron has been developed to accelerate the continuous beam of the 0.5-10 MeV range in compact space. It is the first example as an electron accelerator incorporated a ridged RF cavity. A prototype system of final energy of 2.5 MeV has been studied to confirm the feasibility at present

  11. Advanced Electron Linacs

    Energy Technology Data Exchange (ETDEWEB)

    Siemann, R.

    2005-02-14

    The research into advanced acceleration concepts for electron linear accelerators being pursued at SLAC is reviewed. This research includes experiments in laser acceleration, plasma wakefield acceleration, and mmwavelength RF driven accelerators.

  12. Electronic Universal Vote

    Directory of Open Access Journals (Sweden)

    Cristian USCATU

    2008-01-01

    Full Text Available In the days of informational society everything is going online. Most aspects of our lives have online components. Since democracy is a big issue, it could not escape this trend. Governments themselves are moving to the online environment for the purpose of improving their internal efficiency and their availability to the citizens, businesses and other parties interested. Since governments are the result of elections, elections have also been touched by the electronic fever. New electronic voting solutions arise and each one brings new debates with many arguments in their favor and against them. Accessibility and ease of use leads the arguments in favor of electronic voting over the internet, while fear of fraud is the main reason people are avoiding electronics and clinging on classic paper ballots.

  13. ORELA electron guns

    International Nuclear Information System (INIS)

    Christian, O.W.; Lewis, T.A.

    1981-09-01

    The most recent information concerning the production and performance of ORELA electron guns is presented. Included are descriptions of procedures for gun fabrication, cathode conditioning and high voltage processing. Highlights of the performance characteristics are also included

  14. Corrosion in Electronics

    DEFF Research Database (Denmark)

    Ambat, Rajan; Gudla, Helene Virginie Conseil; Verdingovas, Vadimas

    2017-01-01

    Electronic control units, power modules, and consumer electronics are used today in a wide variety of varying climatic conditions. Varying external climatic conditions of temperature and humidity can cause an uncontrolled local climate inside the device enclosure. Uncontrolled humidity together...... and high density packing combined with the use of several materials, which can undergo electrochemical corrosion in the presence of water film formed due to humidity exposure and bias conditions on the PCBA surface. This article provides a short review of the corrosion reliability issues of electronics due...... to the use of electronics under varying humidity conditions. Important PCBA aspects, which are fundamental to the corrosion cell formation under humid conditions, are discussed. Effect of hygroscopic residues from the process and service and their role in assisting water film build up and corrosion...

  15. Paper based electronics platform

    KAUST Repository

    Nassar, Joanna Mohammad; Sevilla, Galo Andres Torres; Hussain, Muhammad Mustafa

    2017-01-01

    A flexible and non-functionalized low cost paper-based electronic system platform fabricated from common paper, such as paper based sensors, and methods of producing paper based sensors, and methods of sensing using the paper based sensors

  16. Electronic personal dosemeters

    International Nuclear Information System (INIS)

    Marshall, T.O.; Bartlett, D.T.; Burgess, P.H.; Cranston, C.S.; Higginbottom, D.J.; Sutton, K.W.

    1990-01-01

    Personal dosimetry services approved by their national authorities for category A workers, invariably use passive dosemeters incorporating photographic film or thermoluminescent detectors. However, the performance characteristics of electronic dosemeters has improved substantially over the past decade to such an extent that in the opening lecture of the Solid State Dosimetry Conference at Oxford in 1986 the development of an electronic 'smart card' based on a silicon detector was briefly discussed. This idea has been taken up and at least one development programme is in progress aimed at the production of an electronic dosemeter suitable for use as a legal device. The more important performance requirements of personal dosemeters for this purpose are discussed and the earlier electronic dosemeter designs and the latest devices under development to meet this specification are compared. (author)

  17. Scanning Auger Electron Microscope

    Data.gov (United States)

    Federal Laboratory Consortium — A JEOL model 7830F field emission source, scanning Auger microscope.Specifications / Capabilities:Ultra-high vacuum (UHV), electron gun range from 0.1 kV to 25 kV,...

  18. Issues in Electronic Publishing.

    Science.gov (United States)

    Meadow, Charles T.

    1997-01-01

    Discusses issues related to electronic publishing. Topics include writing; reading; production, distribution, and commerce; copyright and ownership of intellectual property; archival storage; technical obsolescence; control of content; equality of access; and cultural changes. (Author/LRW)

  19. Modular Lego-Electronics

    KAUST Repository

    Shaikh, Sohail F.; Ghoneim, Mohamed T.; Bahabry, Rabab R.; Khan, Sherjeel M.; Hussain, Muhammad Mustafa

    2017-01-01

    . Here, a generic manufacturable method of converting state-of-the-art complementary metal oxide semiconductor-based ICs into modular Lego-electronics is shown with unique geometry that is physically identifiable to ease manufacturing and enhance

  20. Electron linac injector developments

    International Nuclear Information System (INIS)

    Fraser, J.S.

    1986-01-01

    There is a continuing demand for improved injectors for electron linacs. Free-electron laser (FEL) oscillators require pulse trains of high brightness and, in some applications, high average power at the same time. Wakefield-accelerator and laser-acceleration experiments require isolated bunches of high peak brightness. Experiments with alkali-halide photoemissive and thermionic electron sources in rf cavities for injector applications are described. For isolated pulses, metal photocathodes (illuminated by intense laser pulses) are being employed. Reduced emittance growth in high-peak-current electron injectors may be achieved by linearizing the cavity electric field's radial component and by using high field strengths at the expense of lower shunt impedance. Harmonically excited cavities have been proposed for enlarging the phase acceptance of linac cavities and thereby reducing the energy spread produced in the acceleration process. Operation of injector linacs at a subharmonic of the main linac frequency is also proposed for enlarging the phase acceptance

  1. Electronics for guitarists

    CERN Document Server

    Dailey, Denton J

    2014-01-01

    Electronics for Guitarists focuses on analog circuitry, and is written for the guitarist interested in transistor and vacuum tube-based amplifiers. Topics include discrete transistors and diodes, classical filter circuits, and vacuum tube-based amplifiers.

  2. Nemo-3 calorimeter electronics

    International Nuclear Information System (INIS)

    Bernaudin, P.; Cheikali, C.; Lavigne, B.; Richard, A.; Lebris, J.

    2000-11-01

    The calorimeter electronics of the NEMO-3 double beta decay experiment fulfills three functions: -energy measurement of the electrons by measuring the charge of the pulses, - time measurement, - fast first level triggering. The electronics of the 1940 Scintillator-PM modules is implemented as 40 '9U x 400 mm VME' boards of up to 51 channels. For each channel the analog signals conditioning is implemented as one SMD daughter board. Each board performs 12 bit charge measurements with 0.35 pC charge resolution, 12 bit time measurements with 50 ps time resolution and a fast analog multiplicity level for triggering. The total handling and conversion time for all the channels is less than 100 μs. The electronics will be presented as well as the test system. (authors)

  3. Novel electron gas systems

    International Nuclear Information System (INIS)

    Senatore, G.; Rapisarda, F.; Conti, S.

    1998-01-01

    We review recent progress on the physics of electrons in the bilayered electron gas, relevant to coupled quantum wells in GaAs/AIGaAs heterostructures. First we focus on the phase diagram of a symmetric bilayer at T = B = 0, obtained by diffusion Monte Carlo (DMC) simulations. It is found that inter-layer correlations stabilize crystalline structures at intermediate inter-layer separation, while favoring a liquid phase at smaller distance. Also, the available DMC evidence is in contrast with the recently (Hartree-Fock) predicted total charge transfer (TCT), whereby all the electron spontaneously jump in one layer. In fact, one can show that such a TCT state is never stable in the ideal bilayer with no tunneling. We finally comment on ongoing DMC investigations on the electron-hole bilayer, where excitonic condensation is expected to take place. (Copyright (1998) World Scientific Publishing Co. Pte. Ltd)

  4. Improved electron transport layer

    DEFF Research Database (Denmark)

    2012-01-01

    The present invention provides: a method of preparing a coating ink for forming a zinc oxide electron transport layer, comprising mixing zinc acetate and a wetting agent in water or methanol; a coating ink comprising zinc acetate and a wetting agent in aqueous solution or methanolic solution......; a method of preparing a zinc oxide electron transporting layer, which method comprises: i) coating a substrate with the coating ink of the present invention to form a film; ii) drying the film; and iii) heating the dry film to convert the zinc acetate substantially to ZnO; a method of preparing an organic...... photovoltaic device or an organic LED having a zinc oxide electron transport layer, the method comprising, in this order: a) providing a substrate bearing a first electrode layer; b) forming an electron transport layer according to the following method: i) coating a coating ink comprising an ink according...

  5. Magnetic electron scattering

    International Nuclear Information System (INIS)

    Peterson, G.A.

    1989-01-01

    We briefly review some of the motivations, early results, and techniques of magnetic elastic and inelastic electron-nucleus scattering. We then discuss recent results, especially those acquired at high momentum transfers. 50 refs., 19 figs

  6. Advances in electron dosimetry

    International Nuclear Information System (INIS)

    Harder, D.

    1980-04-01

    Starting from the two most important interactions of electrons with matter, energy loss and scattering, a review is given of a number of effects which are important in electron dosimetry. For determining the absorbed dose in a phantom by means of ionization chambers, imformation is required on the electron spectrum at the location of the measurement, on the stopping powers of different materials and on disturbances such as the displacement of the effective point of measurements from the centre of the chamber. By means of figures and photographs of electron traces in bubble chambers, the origin of the formation of the absorbed dose maximum in a phantom is explained. It is shown, how by multiple scattering, the similarity of dose distributions in different media can be explained and how by Monte-Carlo calculations absorbed dose distributions in the surroundings of inhomogeneities (e.g. cavities) in a phantom can be determined. (orig.) [de

  7. Electron gun for SSRF

    International Nuclear Information System (INIS)

    Sheng Shugang; Lin Guoqiang; Gu Qiang; Li Deming

    2003-01-01

    A 100 kV triode-electron-gun has been designed and manufactured for the Linac of Shanghai Synchrotron Radiation Facility (SSRF). In this paper the performance of the gun and some key components are described

  8. PREFACE: Spin Electronics

    Science.gov (United States)

    Dieny, B.; Sousa, R.; Prejbeanu, L.

    2007-04-01

    Conventional electronics has in the past ignored the spin on the electron, however things began to change in 1988 with the discovery of giant magnetoresistance in metallic thin film stacks which led to the development of a new research area, so called spin-electronics. In the last 10 years, spin-electronics has achieved a number of breakthroughs from the point of view of both basic science and application. Materials research has led to several major discoveries: very large tunnel magnetoresistance effects in tunnel junctions with crystalline barriers due to a new spin-filtering mechanism associated with the spin-dependent symmetry of the electron wave functions new magnetic tunnelling barriers leading to spin-dependent tunnelling barrier heights and acting as spin-filters magnetic semiconductors with increasingly high ordering temperature. New phenomena have been predicted and observed: the possibility of acting on the magnetization of a magnetic nanostructure with a spin-polarized current. This effect, due to a transfer of angular momentum between the spin polarized conduction electrons and the local magnetization, can be viewed as the reciprocal of giant or tunnel magnetoresistance. It can be used to switch the magnetization of a magnetic nanostructure or to generate steady magnetic excitations in the system. the possibility of generating and manipulating spin current without charge current by creating non-equilibrium local accumulation of spin up or spin down electrons. The range of applications of spin electronics materials and phenomena is expanding: the first devices based on giant magnetoresistance were the magnetoresistive read-heads for computer disk drives. These heads, introduced in 1998 with current-in plane spin-valves, have evolved towards low resistance tunnel magnetoresistice heads in 2005. Besides magnetic recording technology, these very sensitive magnetoresistive sensors are finding applications in other areas, in particular in biology. magnetic

  9. ELECTRONIC BANKING AND ELECTRONIC COMMERCE IN SERBIA

    Directory of Open Access Journals (Sweden)

    Ivana B. Petrevska

    2014-10-01

    Full Text Available Nowadays, we may witness to dramatic and visible changes in our life environment. Business ambient for companies is different every day, and it is very hard to predict a direction of future changes. There is an environment characterized by sharp competition and increasing number of competitors, fast technological improvements and highly sophisticated and informed costumers. Technological process influences the humanity strongly, changing the way that people live, work and spend. Electronic commerce and electronic banking has become incontinent, and makes a great part of today's total transactions. There are an increasing number of companies that perform their business that way and make profit. Social networks are proven to be the least expensive way of information exchange, and they are present in almost every part of the world. The globalization has reached the most distant parts of the Earth. Every resistance to new technologies is dangerous and may lead to bankruptcy. Due to the EU expansion, Internet users are to be expected, and prosperity of the e-commerce business models at the same time. In Serbia, electronic commerce is present, but not as developed as in EU countries. E-commerce, however it might be successful throughout the world, it is somewhat slow in its growth in Serbia. The reasons are numerous, and main obstacles are the lack of trust, still limited usage of banking cards, avoiding of e-payments by older population etc. Also, the recent scandals over the misuse of personal data, and e-crime are discouraging factors for the growth of e-trade and ebanking. The younger generations are ever more ready to use e-commerce, since they are open to new technologies and do not have the defensive attitude towards it. E-commerce and e-banking has growing potential even among older population, if the society prevents them from fear and mistrust.

  10. Thermionics basic principles of electronics

    CERN Document Server

    Jenkins, J; Ashhurst, W

    2013-01-01

    Basic Principles of Electronics, Volume I : Thermionics serves as a textbook for students in physics. It focuses on thermionic devices. The book covers topics on electron dynamics, electron emission, and the themionic vacuum diode and triode. Power amplifiers, oscillators, and electronic measuring equipment are studied as well. The text will be of great use to physics and electronics students, and inventors.

  11. Low emittance thermionic electron guns

    International Nuclear Information System (INIS)

    Herrmannsfeldt, W.B.

    1989-01-01

    The author discusses self-field effects and external field effects for electron guns. He also discusses designs of electron guns and their uses in electron cooling systems and as an injector for electrostatic free electron lasers. He closes by looking at electron guns for linear accelerators. 20 references, 3 figures

  12. A new stage of nuclear electronics-particle electronics

    International Nuclear Information System (INIS)

    Xi Deming

    1987-01-01

    The rapid development of high energy physics experiments has pushed the nuclear electronics to a new stage, i.e. the particle electronics. In this paper the background, main features and recent trends of the particle electronics are expounded

  13. Electron attachment cross sections obtained from electron attachment spectroscopy

    International Nuclear Information System (INIS)

    Popp, P.; Baumbach, J.I.; Leonhardt, J.W.; Mothes, S.

    1988-01-01

    Electron capture detectors have a high sensitivity for substances with high thermal electron attachment cross sections. The electron attachment spectroscopy makes it possible to change the mean electron energy in such a way that the maximum for dissociative electron attachment is reached. Thus, best operation modes of the detection system as well as significant dependencies of electron attachment coefficients are available. Cross sections for electron attachment as a function of the electron energy are obtained with the knowledge of electron energy distribution functions from Boltzmann equation analysis by a special computer code. A disadvantage of this electron attachment spectroscopy is the superposition of space charge effects due to the decrease of the electron drift velocity with increasing mean electron energy. These influences are discussed. (author)

  14. Auroal electron distribution function

    International Nuclear Information System (INIS)

    Kaufmann, R.L.; Dusenbery, P.B.; Thomas, B.J.; Arnoldy, R.L.

    1978-01-01

    The electron velocity distribution function is presented in the energy range 25 eV 8 cm/s (E=300 eV) are nearly isotropic in pitch angle throughout the flight. Upgoing electrons show almost no pitch angle dependence beyond 120 0 , and their fluxes decline smoothly as energy increases, with little or no evidence of a plateau. Preliminary results of numerical integrations, to study bulk properties and stability of the plasma are presented

  15. Mathematics for electronic technology

    CERN Document Server

    Howson, D P

    1975-01-01

    Mathematics for Electronic Technology is a nine-chapter book that begins with the elucidation of the introductory concepts related to use of mathematics in electronic engineering, including differentiation, integration, partial differentiation, infinite series, vectors, vector algebra, and surface, volume and line integrals. Subsequent chapters explore the determinants, differential equations, matrix analysis, complex variable, topography, graph theory, and numerical analysis used in this field. The use of Fourier method for harmonic analysis and the Laplace transform is also described. The ma

  16. Electricity electron measurement

    International Nuclear Information System (INIS)

    Kim, Sang Jin; Sung, Rak Jin

    1985-11-01

    This book deals with measurement of electricity and electron. It is divided into fourteen chapters, which depicts basic of electricity measurement, unit and standard, important electron circuit for measurement, instrument of electricity, impedance measurement, power and power amount measurement, frequency and time measurement, waveform measurement, record instrument and direct viewing instrument, super high frequency measurement, digital measurement on analog-digital convert, magnetic measurement on classification by principle of measurement, measurement of electricity application with principle sensors and systematization of measurement.

  17. Electron affinities: theoretical

    International Nuclear Information System (INIS)

    Kaufman, J.J.

    1976-01-01

    A brief description is given of the conceptual background and formalism of the various ab-initio and semi-ab-initio quantum computational techniques for calculating atomic and molecular electron affinities: Hartree--Fock--Roothaan SCF, configuration interaction (CI), multiconfiguration SCF (MC-SCF), Bethe--Goldstone, superposition of configurations (SOC), ab-initio effective core model potentials, Xα-MS, plus other less common methods. Illustrative and comparative examples of electron affinities calculated by these various methods are presented

  18. Electronics practice technology

    International Nuclear Information System (INIS)

    1995-01-01

    This book concentrates on electronic technology. It deals with kinds of terminal and mounting such as teflon terminal, steatite terminal, and harmonica terminal, small parts like connector, plug jack, vernier dial, and coupling, termination of wiring, kinds of switch and mounting, a condenser, fixed resistor, trance coil, loading of semiconductor, mounting of high input impedance circuit, mounting of electric power circuit, manufacturing of print substrate and practice of manufacturing for print substrate. This is one of series books on electronic technology.

  19. Electron-ion collisions

    International Nuclear Information System (INIS)

    Crandall, D.H.

    1982-01-01

    This discussion concentrates on basic physics aspects of inelastic processes of excitation, ionization, and recombination that occur during electron-ion collisions. Except for cases of illustration along isoelectronic sequences, only multicharged (at least +2) ions will be specifically discussed with some emphasis of unique physics aspects associated with ionic charge. The material presented will be discussed from a primarily experimental viewpoint with most attention to electron-ion interacting beams experiments

  20. Newnes electronics toolkit

    CERN Document Server

    Phillips, Geoff

    2013-01-01

    Newnes Electronics Toolkit brings together fundamental facts, concepts, and applications of electronic components and circuits, and presents them in a clear, concise, and unambiguous format, to provide a reference book for engineers. The book contains 10 chapters that discuss the following concepts: resistors, capacitors, inductors, semiconductors, circuit concepts, electromagnetic compatibility, sound, light, heat, and connections. The engineer's job does not end when the circuit diagram is completed; the design for the manufacturing process is just as important if volume production is to be

  1. Electronic states of myricetin

    DEFF Research Database (Denmark)

    Vojta, Danijela; Karlsen, Eva; Spanget-Larsen, Jens

    2017-01-01

    Myricetin (3,3',4',5,5',7'-hexahydroxyflavone) was investigated by linear dichroism spectroscopy on molecular samples partially aligned in stretched poly(vinyl alcohol) (PVA). At least five electronic transitions in the range 40000 – 20000 cm–1 were characterized with respect to their wavenumbers......, relative intensities, and transition moment directions. The observed bands were assigned to electronic transitions predicted with TD-B3LYP/6-31+G(d,p)....

  2. Newnes electronics assembly handbook

    CERN Document Server

    Brindley, Keith

    2013-01-01

    Newnes Electronics Assembly Handbook: Techniques, Standards and Quality Assurance focuses on the aspects of electronic assembling. The handbook first looks at the printed circuit board (PCB). Base materials, basic mechanical properties, cleaning of assemblies, design, and PCB manufacturing processes are then explained. The text also discusses surface mounted assemblies and packaging of electromechanical assemblies, as well as the soldering process. Requirements for the soldering process; solderability and protective coatings; cleaning of PCBs; and mass solder/component reflow soldering are des

  3. The Recycler Electron Cooler

    Energy Technology Data Exchange (ETDEWEB)

    Shemyakin, A. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Prost, L. R. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

    2013-03-19

    The Recycler Electron cooler was the first (and so far, the only) cooler working at a relativistic energy (γ = 9.5). It was successfully developed in 1995-2004 and was in operation at Fermilab in 2005-2011, providing cooling of antiprotons in the Recycler ring. This paper describes the cooler, difficulties in achieving the required electron beam parameters and the ways to overcome them, cooling measurements, and details of operation.

  4. Weakly oval electron lense

    International Nuclear Information System (INIS)

    Daumenov, T.D.; Alizarovskaya, I.M.; Khizirova, M.A.

    2001-01-01

    The method of the weakly oval electrical field getting generated by the axially-symmetrical field is shown. Such system may be designed with help of the cylindric form coaxial electrodes with the built-in quadrupole duplet. The singularity of the indicated weakly oval lense consists of that it provides the conducting both mechanical and electronic adjustment. Such lense can be useful for elimination of the near-axis astigmatism in the electron-optical system

  5. Electronics 3 checkbook

    CERN Document Server

    Knight, S A; May, A J C

    2013-01-01

    Electronics 3 Checkbook provides a concise coverage of the theories and definitions of concepts in electronics. The book provides problems and worked examples to supplement fuller textbooks of the same subject. The coverage of the text includes decibel measurement, operational amplifiers, DA and AD converters, controlled rectifiers, triggering devices, optoelectronic devices, fiber optics, and power amplifiers. The text will be of great use to electrical engineering students who wish to enhance their understanding of the basics of mechanical and electrical science.

  6. Antifragile Electronic Warfare

    OpenAIRE

    Lichtman, Marc

    2014-01-01

    This letter introduces the concept of antifragile electronic warfare (EW), which we define as the ability to allow a communications link to improve performance due to the presence of a jammer. This concept should not be confused with jamming countermeasures (a.k.a. anti-jamming or electronic protection). Rather, antifragile EW can be thought of as the next step beyond simply avoiding or mitigating jamming. After introducing the concept we narrow down the subset of jammers this concept can be ...

  7. Electrical and electronic principles

    CERN Document Server

    Knight, SA

    1988-01-01

    Electrical and Electronic Principles, 3 focuses on the principles involved in electrical and electronic circuits, including impedance, inductance, capacitance, and resistance.The book first deals with circuit elements and theorems, D.C. transients, and the series circuits of alternating current. Discussions focus on inductance and resistance in series, resistance and capacitance in series, power factor, impedance, circuit magnification, equation of charge, discharge of a capacitor, transfer of power, and decibels and attenuation. The manuscript then examines the parallel circuits of alternatin

  8. Nuclear electronics laboratory manual

    International Nuclear Information System (INIS)

    1984-05-01

    The Nuclear Electronics Laboratory Manual is a joint product of several electronics experts who have been associated with IAEA activity in this field for many years. The manual does not include experiments of a basic nature, such as characteristics of different active electronics components. It starts by introducing small electronics blocks, employing one or more active components. The most demanding exercises instruct a student in the design and construction of complete circuits, as used in commercial nuclear instruments. It is expected that a student who completes all the experiments in the manual should be in a position to design nuclear electronics units and also to understand the functions of advanced commercial instruments which need to be repaired or maintained. The future tasks of nuclear electronics engineers will be increasingly oriented towards designing and building the interfaces between a nuclear experiment and a computer. The manual pays tribute to this development by introducing a number of experiments which illustrate the principles and the technology of interfacing

  9. Auroral electron energies

    International Nuclear Information System (INIS)

    McEwan, D.J.; Duncan, C.N.; Montalbetti, R.

    1981-01-01

    Auroral electron characteristic energies determined from ground-based photometer measurements of the ratio of 5577 A OI and 4278 A N 2 + emissions are compared with electron energies measured during two rocket flights into pulsating aurora. Electron spectra with Maxwellian energy distributions were observed in both flights with an increase in characteristic energy during each pulsation. During the first flight on February 15, 1980 values of E 0 ranging from 1.4 keV at pulsation minima to 1.8 keV at pulsation maxima were inferred from the 5577/4278 ratios, in good agreement with rocket measurements. During the second flight on February 23, direct electron energy measurements yielded E 0 values of 1.8 keV rising to 2.1 keV at pulsation maxima. The photometric ratio measurements in this case gave inferred E 0 values about 0.5 keV lower. This apparent discrepancy is considered due to cloud cover which impaired the absolute emission intensity measurements. It is concluded that the 5577/4278 ratio does yield a meaningful measure of the characteristic energy of incoming electrons. This ratio technique, when added to the more sensitive 6300/4278 ratio technique usable in stable auroras can now provide more complete monitoring of electron influx characteristics. (auth)

  10. Netiquette in Electronic Communication

    Directory of Open Access Journals (Sweden)

    Tomáš Kozík

    2014-06-01

    Full Text Available Electronic mail and electronic communications systems are considered significant and effective tools of communication. One of the most widespread electronic communication tools is e - mail communication. In order to avoid misinterpretation of the report on the side of the recipient, it is need to pay attention to the writing of e - mail messages as well as to their content. With the continuous expansion of the use of electronic communication there have gradually developed certain rules of etiquette in electronic communications. The existing rules of the propriety ones are expressed in the term " etiqutte " and are not automatically applied in the new communications environment - media. For electronic communication, the new rules of etiquette have been stabilised into a term NETIQUETTE. The word netiquette was created by combining words NET (net and ETIKETA (a set of rules of social behavior and habits. Netiquette constitutes the rules of the behavior of users on a network. Although the netiquette is merely "an unwritten set of rules", their not using can be understood as a type of disrespect. Analysis of knowledge of domestic and foreign sources as well as results of a survey confirmed the justification of paying attention to the education of individuals in NETIQUETTE, irrespective of the degree of education.

  11. HDTV versus electronic cinema

    Science.gov (United States)

    Tinker, Michael

    1998-12-01

    We are on the brink of transforming the movie theatre with electronic cinema. Technologies are converging to make true electronic cinema, with a 'film look,' possible for the first time. In order to realize the possibilities, we must leverage current technologies in video compression, electronic projection, digital storage, and digital networks. All these technologies have only recently improved sufficiently to make their use in the electronic cinema worthwhile. Video compression, such as MPEG-2, is designed to overcome the limitations of video, primarily limited bandwidth. As a result, although HDTV offers a serious challenge to film-based cinema, it falls short in a number of areas, such as color depth. Freed from the constraints of video transmission, and using the recently improved technologies available, electronic cinema can move beyond video; Although movies will have to be compressed for some time, what is needed is a concept of 'cinema compression,' rather than video compression. Electronic cinema will open up vast new possibilities for viewing experiences at the theater, while at the same time offering up the potential for new economies in the movie industry.

  12. Transformational III-V Electronics

    KAUST Repository

    Nour, Maha A.

    2014-01-01

    Flexible electronics using III-V materials for nano-electronics with high electron mobility and optoelectronics with direct band gap are attractive for many applications. This thesis describes a complementary metal oxide semiconductor (CMOS

  13. Beginning analog electronics through projects

    CERN Document Server

    Singmin, Andrew

    2001-01-01

    Analog electronics is the simplest way to start a fun, informative, learning program. Beginning Analog Electronics Through Projects, Second Edition was written with the needs of beginning hobbyists and students in mind. This revision of Andrew Singmin's popular Beginning Electronics Through Projects provides practical exercises, building techniques, and ideas for useful electronics projects. Additionally, it features new material on analog and digital electronics, and new projects for troubleshooting test equipment.Published in the tradition of Beginning Electronics Through Projects an

  14. Electron Accumulative Molecules.

    Science.gov (United States)

    Buades, Ana B; Sanchez Arderiu, Víctor; Olid-Britos, David; Viñas, Clara; Sillanpää, Reijo; Haukka, Matti; Fontrodona, Xavier; Paradinas, Markos; Ocal, Carmen; Teixidor, Francesc

    2018-02-28

    With the goal to produce molecules with high electron accepting capacity and low reorganization energy upon gaining one or more electrons, a synthesis procedure leading to the formation of a B-N(aromatic) bond in a cluster has been developed. The research was focused on the development of a molecular structure able to accept and release a specific number of electrons without decomposing or change in its structural arrangement. The synthetic procedure consists of a parallel decomposition reaction to generate a reactive electrophile and a synthesis reaction to generate the B-N(aromatic) bond. This procedure has paved the way to produce the metallacarboranylviologen [M(C 2 B 9 H 11 )(C 2 B 9 H 10 )-NC 5 H 4 -C 5 H 4 N-M'(C 2 B 9 H 11 )(C 2 B 9 H 10 )] (M = M' = Co, Fe and M = Co and M' = Fe) and semi(metallacarboranyl)viologen [3,3'-M(8-(NC 5 H 4 -C 5 H 4 N-1,2-C 2 B 9 H 10 )(1',2'-C 2 B 9 H 11 )] (M = Co, Fe) electron cumulative molecules. These molecules are able to accept up to five electrons and to donate one in single electron steps at accessible potentials and in a reversible way. By targeted synthesis and corresponding electrochemical tests each electron transfer (ET) step has been assigned to specific fragments of the molecules. The molecules have been carefully characterized, and the electronic communication between both metal centers (when this situation applies) has been definitely observed through the coplanarity of both pyridine fragments. The structural characteristics of these molecules imply a low reorganization energy that is a necessary requirement for low energy ET processes. This makes them electronically comparable to fullerenes, but on their side, they have a wide range of possible solvents. The ET from one molecule to another has been clearly demonstrated as well as their self-organizing capacity. We consider that these molecules, thanks to their easy synthesis, ET, self-organizing capacity, wide range of solubility, and easy processability, can

  15. Electronic Submissions of Pesticide Applications

    Science.gov (United States)

    Applications for pesticide registration can be submitted electronically, including forms, studies, and draft product labeling. Applicants need not submit multiple electronic copies of any pieces of their applications.

  16. Electron beams and applications

    International Nuclear Information System (INIS)

    Haouat, G.; Couillaud, C.

    1998-01-01

    Studies of the physical properties of the ELSA-linac electron beam are presented. They include measurements of the characteristic beam parameter and analyzes of the beam transport using simulation codes. The aim of these studies is to determine the best conditions for production of intense and very short electron bunches and to optimize the transport of space-charge dominated beams. Precise knowledge of the transport dynamics allows to produce beams with the required characteristics for light production in Free-Electron Laser (FEL), and to give a good description of energy-transfer phenomena between electrons and photons in the wriggler. The particular features of ELSA authorize studies of high-intensity, high-brightness beam properties, especially the halo surrounding the dense core of the electron bunches, which is formed by the space charge effects. It is also shown that the ELSA facility is well suited for the fabrication of very short γ and X-rays sources for applied research in nuclear and plasma physics, or for time response studies of fast detectors. (author)

  17. Auroral electron time dispersion

    International Nuclear Information System (INIS)

    Kletzing, C.A.

    1989-01-01

    A sounding rocket flight was launched from Greenland in 1985 to study high latitude, early morning auroral physics. The payload was instrumented with electron and ion detectors, AC and DC electric field experiments, a plasma density experiment, and a magnetometer to measure the ambient field. The rocket was launched during disturbed conditions, when the polar cap was in a contracted state with visible aurora overhead. The electron data contained numerous signatures indicative of time-of-flight energy dispersion characterized by a coherent structure in which lower energy electrons arrived at the rocket after higher energy electrons. A model was constructed to explain this phenomena by the sudden application of a region of parallel electric field along a length of magnetic field line above the rocket. The model incorporates detector response and uses an altitudinal density profile based on auroral zone measurements. Three types of potential structures were tried: linear, quadratic and cubic. Of the three it was found that the cubic (electric field growing in a quadratic manner moving up the field line) produced the best fit to the data. The potential region was found to be approximately 1-2 R e in extent with the lower edge 3000-4000 km away from the rocket. The background electron temperature in the model which produced the best fit to the data was of the order of 15 eV

  18. Electron irradiation of zeolites

    International Nuclear Information System (INIS)

    Wang, S.X.; Wang, L.M.; Ewing, R.C.

    1999-01-01

    Three different zeolites (analcime, natrolite, and zeolite-Y) were irradiated with 200 keV and 400 keV electrons. All zeolites amorphized under a relatively low electron fluence. The transformation from the crystalline-to-amorphous state was continuous and homogeneous. The electron fluences for amorphization of the three zeolites at room temperature were: 7.0 x 10 19 e - /cm 2 (analcime), 1.8 x 10 20 e - /cm 2 (natrolite), and 3.4 x 10 20 e - /cm 2 (zeolite-Y). The different susceptibilities to amorphization are attributed to the different channel sizes in the structures which are the pathways for the release of water molecules and Na + . Natrolite formed bubbles under electron irradiation, even before complete amorphization. Analcime formed bubbles after amorphization. Zeolite-Y did not form bubbles under irradiation. The differences in bubble formation are attributed to the different channel sizes of the three zeolites. The amorphization dose was also measured at different temperatures. An inverse temperature dependence of amorphization dose was observed for all three zeolites: electron dose for amorphization decreased with increasing temperature. This unique temperature effect is attributed to the fact that zeolites are thermally unstable. A semi-empirical model was derived to describe the temperature effect of amorphization in these zeolites

  19. Politics Under Electronic Simultaneity

    Directory of Open Access Journals (Sweden)

    Valery P. Terin

    2014-01-01

    Full Text Available In contradistinction to the book and the other typographic products, the electronic media operates on a 24-hour-a-day basis evoking simultaneity as the guiding mode of perception and thinking for all those under its influence. The discovery of this fact manifested itself in the formation and development of the managerial technologies operating by means of the electronic information environment and following the principle of simultaneity in the first place. Thus, at the end of the 1960s already the election campaigns in the U.S.A. began to operate on the basis of the final cause as the guiding principle of the country's mass consciousness motivating to carry out each particular event as if already rejoicing at the victory. With this in mind, there emerged a problem of applying this approach with its enormous managerial potential elsewhere. To add, simultaneity as a norm of perception and thinking turned out to be increasingly important with the advent of the electrical telegraph and the press relying on its short disconnected messages instantaneously arriving from all parts of the world. All the other media, which emerged in the wake of this development, has served to fortify this mode of thought as governing in the electronic information environment. The potential of the electronically operating global managerial technologies is quickly growing. The article also deals with the information overload and pattern recognition problem understood in managerial terms as well as mythologization and demythologization processes as they are necessitated by the electronic media coverage worldwide.

  20. Reversibly Bistable Flexible Electronics

    KAUST Repository

    Alfaraj, Nasir

    2015-05-01

    Introducing the notion of transformational silicon electronics has paved the way for integrating various applications with silicon-based, modern, high-performance electronic circuits that are mechanically flexible and optically semitransparent. While maintaining large-scale production and prototyping rapidity, this flexible and translucent scheme demonstrates the potential to transform conventionally stiff electronic devices into thin and foldable ones without compromising long-term performance and reliability. In this work, we report on the fabrication and characterization of reversibly bistable flexible electronic switches that utilize flexible n-channel metal-oxide-semiconductor field-effect transistors. The transistors are fabricated initially on rigid (100) silicon substrates before they are peeled off. They can be used to control flexible batches of light-emitting diodes, demonstrating both the relative ease of scaling at minimum cost and maximum reliability and the feasibility of integration. The peeled-off silicon fabric is about 25 µm thick. The fabricated devices are transferred to a reversibly bistable flexible platform through which, for example, a flexible smartphone can be wrapped around a user’s wrist and can also be set back to its original mechanical position. Buckling and cyclic bending of such host platforms brings a completely new dimension to the development of flexible electronics, especially rollable displays.

  1. Theory of runaway electrons

    Energy Technology Data Exchange (ETDEWEB)

    Dreicer, H [Los Alamos Scientific Laboratory, University of California, Los Alamos, NM (United States)

    1958-07-01

    This paper treats the problem of electrons moving through an infinite gas of positive ions under the influence of a static uniform electric field of arbitrary strength. In evaluating the electrical conductivity of such a gas the conventional treatment involves a perturbation solution of the time-independent Boltzmann equation, and results in the well-known (temperature){sup 3/2} law. Two assumptions are basic to these treatments: 1) that a steady state electron velocity distribution is attained several mean-free collision times after the electric field is applied, and 2) that the terminal electron drift velocity is small compared to the average random electron speed. Both assumptions are avoided in this paper. In the next section the problem is formulated starting with the Boltzmann equation and a review of approximate analytic solutions appropriate to the weak and strong electric field cases is presented. We then describe a time-dependent numerical solution to the Boltzmann equation and compare these results with the approximate solutions. All of these treatments lead to the conclusion that this problem does not admit a time-independent solution. Because of the strong energy dependence of the Rutherford scattering law, the electron drift velocity is not bounded by a terminal value, rather it grows monotonically with time. This is the so-called runaway effect predicted by Giovanelli. Collective effects, or plasma oscillations, are ignored in this work, although these undoubtedly play an important role in the conduction of electricity through the plasma.

  2. Microfluidic stretchable RF electronics.

    Science.gov (United States)

    Cheng, Shi; Wu, Zhigang

    2010-12-07

    Stretchable electronics is a revolutionary technology that will potentially create a world of radically different electronic devices and systems that open up an entirely new spectrum of possibilities. This article proposes a microfluidic based solution for stretchable radio frequency (RF) electronics, using hybrid integration of active circuits assembled on flex foils and liquid alloy passive structures embedded in elastic substrates, e.g. polydimethylsiloxane (PDMS). This concept was employed to implement a 900 MHz stretchable RF radiation sensor, consisting of a large area elastic antenna and a cluster of conventional rigid components for RF power detection. The integrated radiation sensor except the power supply was fully embedded in a thin elastomeric substrate. Good electrical performance of the standalone stretchable antenna as well as the RF power detection sub-module was verified by experiments. The sensor successfully detected the RF radiation over 5 m distance in the system demonstration. Experiments on two-dimensional (2D) stretching up to 15%, folding and twisting of the demonstrated sensor were also carried out. Despite the integrated device was severely deformed, no failure in RF radiation sensing was observed in the tests. This technique illuminates a promising route of realizing stretchable and foldable large area integrated RF electronics that are of great interest to a variety of applications like wearable computing, health monitoring, medical diagnostics, and curvilinear electronics.

  3. Electron guns for accelerators

    International Nuclear Information System (INIS)

    Rangarajan, L.M.; Mahadevan, S.; Ramamurthi, S.S.

    1995-01-01

    The high voltage, high current electron guns developed elsewhere for Linacs are based on cathode pulsing with direct emitting cathodes. Our grid pulsed triode gun employs indirect emitting cathode pellet under electron bombardment or a direct cathode emitter. Electron beam from the gun is injected to the accelerator guide at 40 kV and pulse duration is 2.8μsec. The gun is limited to axially symmetric geometry and electron optical design is optimized by computer programming. The gun with a water cooled Faraday cup is connected to a vacuum system comprising of a sputter ion pump and sorption pump. Working pressure is 1x10 -6 Pa. Gun is designed to be baked as an assembly at temperatures of 400 degC while vacuum processing. Materials are therefore restricted to refractory metals, SS, OFHC copper and all the electrodes are housed inside a ceramic tube. Lower Z graphite is used as a base material of Faraday cup. Grid is non-intercepting modulator anode, a new feature introduced, as compared to meshed grid system by others. CAT gun delivers 160 mA current pulses at 40 kV and its working characteristics such as perveance, emittance and beam radius compare well with SLAC and Hermosa guns. The above guns can be used for electron beam machines such as medical Linacs, industrial accelerators and EB welding equipment. (author). 2 refs., 2 figs

  4. Electron microscope phase enhancement

    Science.gov (United States)

    Jin, Jian; Glaeser, Robert M.

    2010-06-15

    A microfabricated electron phase shift element is used for modifying the phase characteristics of an electron beam passing though its center aperture, while not affecting the more divergent portion of an incident beam to selectively provide a ninety-degree phase shift to the unscattered beam in the back focal plan of the objective lens, in order to realize Zernike-type, in-focus phase contrast in an electron microscope. One application of the element is to increase the contrast of an electron microscope for viewing weakly scattering samples while in focus. Typical weakly scattering samples include biological samples such as macromolecules, or perhaps cells. Preliminary experimental images demonstrate that these devices do apply a ninety degree phase shift as expected. Electrostatic calculations have been used to determine that fringing fields in the region of the scattered electron beams will cause a negligible phase shift as long as the ratio of electrode length to the transverse feature-size aperture is about 5:1. Calculations are underway to determine the feasibility of aspect smaller aspect ratios of about 3:1 and about 2:1.

  5. Electron-molecule collisions

    International Nuclear Information System (INIS)

    Shimamura, I.; Takayanagi, K.

    1984-01-01

    The study of collision processes plays an important research role in modern physics. Many significant discoveries have been made by means of collision experiments. Based on theoretical, experimental, and computational studies, this volume presents an overview detailing the basic processes of electron-molecule collisions. The editors have collected papers-written by a group of international experts-that consider a diverse range of phenomena occurring in electronmolecule collisions. The volume discusses first the basic formulation for scattering problems and then gives an outline of the physics of electron-molecule collisions. The main topics covered are rotational transitions, vibrational transitions, dissociation of molecules in slow collisions, the electron-molecule collision as a spectroscopic tool for studying molecular electronic structures, and experimental and computational techniques for determining the cross sections. These well-referenced chapters are self-contained and can be read independently or consecutively. Authoritative and up-to-date, Electron-Molecule Collisions is a useful addition to the libraries of students and researchers in the fields of atomic, molecular, and chemical physics, and physical chemistry

  6. Electronic Commerce user manual

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD`s Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases & Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  7. Electronic Commerce user manual

    Energy Technology Data Exchange (ETDEWEB)

    1992-04-10

    This User Manual supports the Electronic Commerce Standard System. The Electronic Commerce Standard System is being developed for the Department of Defense of the Technology Information Systems Program at the Lawrence Livermore National Laboratory, operated by the University of California for the Department of Energy. The Electronic Commerce Standard System, or EC as it is known, provides the capability for organizations to conduct business electronically instead of through paper transactions. Electronic Commerce and Computer Aided Acquisition and Logistics Support, are two major projects under the DoD's Corporate Information Management program, whose objective is to make DoD business transactions faster and less costly by using computer networks instead of paper forms and postage. EC runs on computers that use the UNIX operating system and provides a standard set of applications and tools that are bound together by a common command and menu system. These applications and tools may vary according to the requirements of the customer or location and may be customized to meet the specific needs of an organization. Local applications can be integrated into the menu system under the Special Databases Applications option on the EC main menu. These local applications will be documented in the appendices of this manual. This integration capability provides users with a common environment of standard and customized applications.

  8. Electronic Materials Science

    Science.gov (United States)

    Irene, Eugene A.

    2005-02-01

    A thorough introduction to fundamental principles and applications From its beginnings in metallurgy and ceramics, materials science now encompasses such high- tech fields as microelectronics, polymers, biomaterials, and nanotechnology. Electronic Materials Science presents the fundamentals of the subject in a detailed fashion for a multidisciplinary audience. Offering a higher-level treatment than an undergraduate textbook provides, this text benefits students and practitioners not only in electronics and optical materials science, but also in additional cutting-edge fields like polymers and biomaterials. Readers with a basic understanding of physical chemistry or physics will appreciate the text's sophisticated presentation of today's materials science. Instructive derivations of important formulae, usually omitted in an introductory text, are included here. This feature offers a useful glimpse into the foundations of how the discipline understands such topics as defects, phase equilibria, and mechanical properties. Additionally, concepts such as reciprocal space, electron energy band theory, and thermodynamics enter the discussion earlier and in a more robust fashion than in other texts. Electronic Materials Science also features: An orientation towards industry and academia drawn from the author's experience in both arenas Information on applications in semiconductors, optoelectronics, photocells, and nanoelectronics Problem sets and important references throughout Flexibility for various pedagogical needs Treating the subject with more depth than any other introductory text, Electronic Materials Science prepares graduate and upper-level undergraduate students for advanced topics in the discipline and gives scientists in associated disciplines a clear review of the field and its leading technologies.

  9. Caribou, individual-based modeling and mega-industry in central West Greenland

    DEFF Research Database (Denmark)

    Raundrup, Katrine; Nymand, Josephine; Nabe-Nielsen, Jacob

    in West Greenland. In a newly started PhD-project the focus will be the implementation of spatially explicit individual based modeling (IBM). The project relies on existing knowledge on caribou behavior and feeding ecology along with data on variations in the vegetation. By relating vegetation, snow......Spatial distribution of caribou (Rangifer tarandus groenlandicus) in West Greenland is a result of both short and long term changes in the Arctic landscape. To understand present distribution 40 satellite collars were deployed on 40 female caribou in the Akia-Maniitsoq herd, central West Greenland...... in an area. Further, enhanced or lowered hunting pressure, and changed weather conditions can be studied using IBM. Thus, both short and long term changes in the landscape will be studied and provide insights in how the specific spatial changes impact caribou in West Greenland....

  10. Will ecosystem management supply woodland caribou habitat in northwestern Ontario?

    Directory of Open Access Journals (Sweden)

    David L. Euler

    1998-03-01

    Full Text Available Ecosystem management is emerging as an important concept in managing forests. Although the basic conceptual idea is not new, important defining principles are developing that elucidate some of the specific attributes of ecosystem management. These principles include: the maintenance of all ecosystems in the managed forest, rhe emulation of natural disturbance patterns on rhe landscape and the insurance that structure and function of forested ecosystems are conserved. Forest management has an impact on woodland caribou (Rangifer tarandus caribou, although the presence of wolves (Canis lupus and moose (Alces alces in the same northern ecosystems also affects the caribou-forestry interacrion. Specific management for caribou as a featured species has been proposed, based on managing large landscape blocks. Ecosystem management would also produce habitat in a manner that might accomplish the goal of conserving woodland caribou as well as maintaining other important ecosystem functions.

  11. Functional and comparative digestive system anatomy of Arctic ungulates

    Directory of Open Access Journals (Sweden)

    R. R. Hofmann

    2011-03-01

    Full Text Available Dietary niche, feeding type classification and seasonal strategies of Rangifer tarandus and Ovibos moschatus discussed in relation to the anatomy of their digestive system. Classification criteria for the flexible feeding type system, originally established in bovids and later adapted to cervids, are substantiated and critically discussed in the light of recent attempts to invalidate the system. Eurasian mountain reindeer, North American barren-ground caribou, Svalbard reindeer and Victoria Island caribou are seasonally adaptable, opportunistic ruminants of the intermediate feeding type but the long evolutionary sepatation of Svalbard reindeer has modified several morphological features for winter survival without lichen, resulting in better adaptation to fibrous forage. Muskoxen, despite their seasonal selectivity, are typical grass and roughage eaters with extremely long mean retention time. Detailed data on the entire digestive system from muzzle to anus on both species are still insufficient and extended studies are worthwhile for understanding their nutritional niche and feeding adaptations.

  12. Review of forestry practices in caribou habitat in southeastern British Columbia, Canada

    Directory of Open Access Journals (Sweden)

    Susan K. Stevenson

    1986-06-01

    Full Text Available Woodland caribou (Rangifer tarandus caribou in southeastern British Columbia feed mainly on arboreal lichens in winter. Some modified forestry practices that have been used or proposed for caribou ranges are reviewed. Partial cutting results in the retention of some forage lichens. Partial cutting and small patch harvesting may improve lichen growth on the remaining trees. Retention of advanced regeneration and some residual trees may improve lichen growth in the remaining stand. Extension of the rotation age increases the amount of harvestable forest useful to caribou at any one time. Progressive cutting minimizes road access to caribou ranges, and may be combined with partial cutting. Most forestry practices intended to maintain lichen production will result in increased human activity in caribou ranges, unless road access is controlled. The management strategy selected depends on site conditions and on the relative importance assigned to the impact of habitat alteration and human activity on caribou.

  13. Canopy, snow, and lichens on woodland caribou range in southeastern Manitoba

    Directory of Open Access Journals (Sweden)

    James A. Schaefer

    1996-01-01

    Full Text Available I examined the relationships among snow cover (api, lichen abundance, and canopy composition on the range of the Aikens Lake population of woodland caribou (Rangifer tarandus caribou in southeastern Manitoba. Percent cover of forage lichens (Cladina spp. was positively correlated with maximum total thickness and with maximum vertical hardness of api. Mixed communities of trembling aspen (Populus tremuloides, spruce (Picea spp., and balsam fir (Abies balsamea showed the most favourable nival conditions for caribou but had low lichen abundance; those dominated by jack pine (Pinus banksiana were the converse. The results suggest an energetic compromise for woodland caribou when foraging for terrestrial lichens. During winter, caribou exhibited significant selection for jack pine communities whereas mixed communities were avoided.

  14. A fire suppression model for forested range of the Beverly and Qamanirjuaq herds of caribou

    Directory of Open Access Journals (Sweden)

    Donald C. Thomas

    1996-01-01

    Full Text Available A fire suppression model was developed for forested winter range of the Beverly and Qamanirjuaq (formerly Kaminuriak herds of barren-ground caribou (Rangifer tarandus groenlandicus in north-central Canada. The model is a balance between total protection, as voiced by some aboriginal people, and a let-burn policy for natural fires advocated by some ecologists. Elements in the model were caribou ecology, lichen recovery after fire, burn history, community priorities for caribou hunting, and fire cycle lengths. The percent ratio of current productive caribou habitat to the goal for that habitat determines whether fire should be suppressed in a specific area. The goals for productive caribou habitat, defined as forests older than 50 years, were scaled by fire cycle length and community priority ranking. Thus, the model is an example of co-management: traditional knowledge combined with science in a joint forum, the Beverly and Qamanirjuaq Caribou Management Board.

  15. The relationship between weather and caribou productivity for the La-Poile Caribou Herd, Newfoundland

    Directory of Open Access Journals (Sweden)

    Steven H. Ferguson

    1991-10-01

    Full Text Available To describe the relationship between weather and caribou (Rangifer tarandus productivity, we compared weather variables (snow on ground, winter temperature and measures of growing season with measures of productivity (calves seen by hunters, calves and yearlings in the harvest and percent calves and yearlings and pregnancy rate for caribou classified during fall and spring surveys for the LaPoile Caribou Herd in southwestern Newfoundland. Hunter statistics reliably estimated changes in population demography. Percent calves seen by hunters was correlated with calves/100 females classified in fall. Weather may have influenced productivity for the LaPoile Caribou Herd in Newfoundland. Colder winter temperatures were associated with fewer calves the next fall and pregnancy rates and yearlings/100 females in the spring were negatively correlated with snow on ground the previous winter. These relationships appear to be density related.

  16. Caribou response to human activity: research and management

    Directory of Open Access Journals (Sweden)

    Donald R. Miller

    2003-04-01

    Full Text Available This paper describes the need by researchers and managers of caribou (Rangifer tarandus to carefully assess the impact of their study methods on animals and results. An error made during a study of barren-ground caribou is described. Assumptions made during preparation of study methods need to be tested during collection of data. Study plans should include communication with, and respect for, residents who depend on the caribou resource. During field observations of caribou behavior, feeding habits, rutting activity or sex and age composition, closer is not better. During capture, handling and marking activities, shorter processing time is better. During aerial surveys, photography, sex and age determinations, higher is better. When interpreting data collected from marked caribou, and generally applying to the unmarked population, caution is advised. The merits and drawbacks of helicopter use to capture and mark caribou for research and management need to be discussed.

  17. Some herding, record keeping and treatment methods used in Alaskan reindeer herds

    Directory of Open Access Journals (Sweden)

    Robert A. Dieterich

    1986-06-01

    Full Text Available Approximately 20000 reindeer (Rangifer tarandus in Alaska are gathered once or twice yearly to facilitate identification, serologic sampling, treatment and antler removal. Various air and land craft are used to bring the animals into a corral system from which they can be herded into a padded, pneumatically operated, squeeze apparatus. Ear tags are applied or read if already in place and ears are notched. A portable, computerized rapid data retrieval system is used to record reproductive success, vaccination and treatment status and other miscellaneous information. Ivermectin is being administered in the early winter months to treat reindeer in many herds for warbles, nasal bots and internal parasites. A killed, homologous Brucella suis type 4 vaccine is being used in two large (3500 herds. Efforts are being made to incorporate other innovative methods to improve herding and corralling methods.

  18. Antler possession by west Greenland female caribou in relation to population characteristics

    Directory of Open Access Journals (Sweden)

    Henning Thing

    1986-06-01

    Full Text Available The frequency of antlerless adult female caribou (Rangifer tarandus groenlandicus was studied in four separate populations in west Greenland. Between the herds antlerlessness varied from 21% to 79%. An inverse relationship between winter range quality and percentage of unantlered cows is demonstrated. Relationship between calf percentage and maternal antler status was studied in one population and antlerless cows showed higher reproductive rate than antlered ones. In another population antlerless cows were almost absent outside the calving area. Calves of antlerless mothers were more susceptible to diseases and had significantly higher summer mortality than other calves, 42% and 27% respectively. The relative importance of factors influencing antler development under various environmental conditons are assessed and a close relationship between antlerlessness, physical condition, lactation, and length of period between calving and midsummer is discussed.

  19. Perinatal mortality in caribou from the Porcupine herd, Alaska.

    Science.gov (United States)

    Roffe, T J

    1993-04-01

    During the 1989 caribou (Rangifer tarandus) calving season on the Arctic National Wildlife Refuge, Alaska (USA), 61 calf carcasses were examined for cause of death and associated pathology. Dead calves were located by low-level aerial searches with two fixed-wing aircraft and a helicopter over high density calving areas between the Hulahula and Aichilik rivers. Primary diagnoses included emaciation (39%), malnutrition (8%), stillbirth (21%), trauma (16%), other primary causes (7%), and undetermined causes (8%). Twenty calves had contributory renal tubular degeneration. The findings indicate that factors contributing to nutritional deprivation in calves were the major cause of neonatal mortality; however, factors affecting stillbirth, abortion, or the urogenital system may have major effects on neonatal caribou and warrant further investigation.

  20. Need for accelerating electrons

    International Nuclear Information System (INIS)

    Kerst, D.W.

    1987-01-01

    Photons for nuclear disintegration experiments were not abundantly available in the early days of nuclear physics, whereas accelerated ions led the way. When electrons could be accelerated into the 20--30 MeV range, they found application not only to nuclear disintegration of the elements of the periodic table but also to x-ray radiography and to deep therapy. Energies of interest for probing nuclear structure by electron scattering and for meson production followed soon after. The elementary nature of the electron has now made it a valuable tool for present day particle physics; and the synchrotron radiation, which is an obstacle for some accelerating processes, has become a much sought after source of photons for experiments at atomic structure energies

  1. Electronic structure of silicene

    International Nuclear Information System (INIS)

    Voon, L. C. Lew Yan

    2015-01-01

    In this topical review, we discuss the electronic structure of free-standing silicene by comparing results obtained using different theoretical methods. Silicene is a single atomic layer of silicon similar to graphene. The interest in silicene is the same as for graphene, in being two-dimensional and possessing a Dirac cone. One advantage of silicene is due to its compatibility with current silicon electronics. Both empirical and first-principles techniques have been used to study the electronic properties of silicene. We will provide a brief overview of the parameter space for first-principles calculations. However, since the theory is standard, no extensive discussion will be included. Instead, we will emphasize what empirical methods can provide to such investigations and the current state of these theories. Finally, we will review the properties computed using both types of theories for free-standing silicene, with emphasis on areas where we have contributed. Comparisons to graphene is provided throughout. (topical review)

  2. Electron microscopy in metallurgy

    International Nuclear Information System (INIS)

    Loretto, M.H.

    1980-01-01

    The aim of this paper is to review briefly the contribution which (TEM) transmission electron microscopy (including high voltage electron microscopy (HVEM)) has made to metallurgy. Since it is straightforward with modern electron microscopes to extract the crystallographic information which provides the basis for any interpretation, the major problem in most metallurgical work lies in assessing how the structure (which TEM has characterised) has arisen and which properties of the specimen can be understood in terms of this structure. Radiation damage, quenching, phase transformations, grain boundaries and plastic deformation have been the main fields in which TEM has contributed significantly. After briefly summarising the role of TEM in each field, examples of recent work will be used to indicate current TEM activity in physical metallurgy. (author)

  3. Wireless Biological Electronic Sensors.

    Science.gov (United States)

    Cui, Yue

    2017-10-09

    The development of wireless biological electronic sensors could open up significant advances for both fundamental studies and practical applications in a variety of areas, including medical diagnosis, environmental monitoring, and defense applications. One of the major challenges in the development of wireless bioelectronic sensors is the successful integration of biosensing units and wireless signal transducers. In recent years, there are a few types of wireless communication systems that have been integrated with biosensing systems to construct wireless bioelectronic sensors. To successfully construct wireless biological electronic sensors, there are several interesting questions: What types of biosensing transducers can be used in wireless bioelectronic sensors? What types of wireless systems can be integrated with biosensing transducers to construct wireless bioelectronic sensors? How are the electrical sensing signals generated and transmitted? This review will highlight the early attempts to address these questions in the development of wireless biological electronic sensors.

  4. Beam electron microprobe

    CERN Document Server

    Stoller, D; Muterspaugh, M W; Pollock, R E

    1999-01-01

    A beam profile monitor based on the deflection of a probe electron beam by the electric field of a stored, electron-cooled proton beam is described and first results are presented. Electrons were transported parallel to the proton beam by a uniform longitudinal magnetic field. The probe beam may be slowly scanned across the stored beam to determine its intensity, position, and size. Alternatively, it may be scanned rapidly over a narrow range within the interior of the stored beam for continuous observation of the changing central density during cooling. Examples of a two dimensional charge density profile obtained from a raster scan and of a cooling alignment study illustrate the scope of measurements made possible by this device.

  5. Noncovalent Molecular Electronics.

    Science.gov (United States)

    Gryn'ova, G; Corminboeuf, C

    2018-05-03

    Molecular electronics covers several distinctly different conducting architectures, including organic semiconductors and single-molecule junctions. The noncovalent interactions, abundant in the former, are also often found in the latter, i.e., the dimer junctions. In the present work, we draw the parallel between the two types of noncovalent molecular electronics for a range of π-conjugated heteroaromatic molecules. In silico modeling allows us to distill the factors that arise from the chemical nature of their building blocks and from their mutual arrangement. We find that the same compounds are consistently the worst and the best performers in the two types of electronic assemblies, emphasizing the universal imprint of the underlying chemistry of the molecular cores on their diverse charge transport characteristics. The interplay between molecular and intermolecular factors creates a spectrum of noncovalent conductive architectures, which can be manipulated using the design strategies based upon the established relationships between chemistry and transport.

  6. PHERMEX electron gun development

    International Nuclear Information System (INIS)

    Builta, L.A.; Elliott, J.C.; Moir, D.C.; Starke, T.P.; Vecere, C.A.

    1983-01-01

    The PHERMEX facility is a 50-MHz standing-wave linear accelerator. Electrons are injected, accelerated, and transported to a tungsten target where bremsstrahlung x rays are generated for flash radiography of hydrodynamic systems. The purpose of this article is to describe the progress of PHERMEX electron gun development. The goal of this program is to generate and transport a 200-ns, 1-MV, 1-kA electron beam into the first PHERMEX accelerating cavity. The standard gun is operated at a pulse voltage of 550 kV, which is the limit determined by internal breakdown of the vacuum insulator. This insulator has been redesigned, and the gun has been pulsed at 750 kV without internal breakdown. At present, the current output is not limited by voltage but by a phenomenon called pulse shortening, which occurs at a pulse voltage of approximately 650 kV. The phenomenon has been investigated and the results are presented

  7. Phasor power electronics

    CERN Document Server

    Rim, Chun T

    2016-01-01

    This book presents a comprehensive introduction to the principles of power electronics, focusing on the switched transformer concept and phasor transformation techniques as employed in the analysis and design of power electronic circuits. Phasor transformations, as introduced in this book, make the time-varying nature of a switching converter simple and easy to handle, transforming it into an equivalent time-invariant circuit. The book starts with an introduction to the philosophy and fundamental principles of power electronics. The switched transformer concept, which is applicable to any switching converter, is introduced, and it is shown how DC-DC converters analyses are then so straightforward that very little equational manipulation is needed. Then the phasor transformation techniques are comprehensively explained over three parts. Single phase and multi-phase AC systems are dealt with through the single phase phasor transformation and circuit DQ transformation, respectively. A general unified phasor tran...

  8. Polarized electron sources

    International Nuclear Information System (INIS)

    Clendenin, J.E.

    1995-05-01

    Polarized electron sources for high energy accelerators took a significant step forward with the introduction of a new laser-driven photocathode source for the SLC in 1992. With an electron beam polarization of >80% and with ∼99% uptime during continuous operation, this source is a key factor in the success of the current SLC high-energy physics program. The SLC source performance is used to illustrate both the capabilities and the limitations of solid-state sources. The beam requirements for future colliders are similar to that of the SLC with the addition in most cases of multiple-bunch operation. A design for the next generation accelerator source that can improve the operational characteristics and at least minimize some of the inherent limitations of present sources is presented. Finally, the possibilities for producing highly polarized electron beams for high-duty-factor accelerators are discussed

  9. Plasma relativistic microwave electronics

    International Nuclear Information System (INIS)

    Kuzelev, M.V.; Loza, O.T.; Rukhadze, A.A.; Strelkov, P.S.; Shkvarunets, A.G.

    2001-01-01

    One formulated the principles of plasma relativistic microwave electronics based on the induced Cherenkov radiation of electromagnetic waves at interaction of a relativistic electron beam with plasma. One developed the theory of plasma relativistic generators and accelerators of microwave radiation, designed and studied the prototypes of such devices. One studied theoretically the mechanisms of radiation, calculated the efficiencies and the frequency spectra of plasma relativistic microwave generators and accelerators. The theory findings are proved by the experiment: intensity of the designed sources of microwave radiation is equal to 500 μW, the frequency of microwave radiation is increased by 7 times (from 4 up to 28 GHz), the width of radiation frequency band may vary from several up to 100%. The designed sources of microwave radiation are no else compared in the electronics [ru

  10. 4D Electron Tomography

    Science.gov (United States)

    Kwon, Oh-Hoon; Zewail, Ahmed H.

    2010-06-01

    Electron tomography provides three-dimensional (3D) imaging of noncrystalline and crystalline equilibrium structures, as well as elemental volume composition, of materials and biological specimens, including those of viruses and cells. We report the development of 4D electron tomography by integrating the fourth dimension (time resolution) with the 3D spatial resolution obtained from a complete tilt series of 2D projections of an object. The different time frames of tomograms constitute a movie of the object in motion, thus enabling studies of nonequilibrium structures and transient processes. The method was demonstrated using carbon nanotubes of a bracelet-like ring structure for which 4D tomograms display different modes of motion, such as breathing and wiggling, with resonance frequencies up to 30 megahertz. Applications can now make use of the full space-time range with the nanometer-femtosecond resolution of ultrafast electron tomography.

  11. Electronics a systems approach

    CERN Document Server

    Storey, Neil

    2017-01-01

    Electronics plays a central role in our everyday lives. It is at the heart of almost all of today's essential technology, from mobile phones to computers and from cars to power stations. As such, all engineers, scientists and technologists need to have a fundamental understanding of this exciting subject, and for many this will just be the beginning. Now in its sixth edition, Electronics: A Systems Approach provides an outstanding introduction to this fast-moving and important field. Comprehensively revised and updated to cover the latest developments in the world of electronics, the text continues to use Neil Storey's established and well-respected systems approach. It introduces the basic concepts first before progressing to a more advanced analysis, enabling you to contextualise what a system is designed to achieve before tackling the intricacies of designing or analysing its various components with confidence. This book is accompanied by a website which contains over 100 video tutorials to help explain ke...

  12. Electron Technology: ELTE 2016

    Science.gov (United States)

    Pisarkiewicz, Tadeusz; Kucewicz, Wojciech

    2016-12-01

    In this paper we present a review of research results and technical accomplishments presented by researchers from technical universities, governmental institutes and research companies during the XIIth Scientific Conference Electron Technology, ELTE 2016. This review is based on materials presented at four topical conference sessions: Microelectronics and Nanoelectronics, Photonics, Materials and Technologies, and Microsystems and also on materials presented by invited speakers at two dedicated sessions. Oral sessions were accompanied by the poster sessions. In effect about 50 papers gathered in this volume reflect the topics discussed at the Conference. A short description of technological and measurement possibilities in the laboratories of Academic Centre for Materials and Nanotechnology and also in the Department of Electronics of the Faculty of Computer Science, Electronics and Telecommunications AGH UST are given.

  13. Electron microscopy of boron carbide before and after electron irradiation

    International Nuclear Information System (INIS)

    Stoto, T.; Zuppiroli, L.; Beauvy, M.; Athanassiadis, T.

    1984-06-01

    The microstructure of boron carbide has been studied by electron microscopy and related to the composition of the material. After electron irradiations in an usual transmission electron microscope and in a high voltage electron microscope at different temperatures and fluxes no change of these microstructures have been observed but a sputtering of the surface of the samples, which has been studied quantitatively [fr

  14. Precision electron polarimetry

    International Nuclear Information System (INIS)

    Chudakov, E.

    2013-01-01

    A new generation of precise Parity-Violating experiments will require a sub-percent accuracy of electron beam polarimetry. Compton polarimetry can provide such accuracy at high energies, but at a few hundred MeV the small analyzing power limits the sensitivity. Mo/ller polarimetry provides a high analyzing power independent on the beam energy, but is limited by the properties of the polarized targets commonly used. Options for precision polarimetry at 300 MeV will be discussed, in particular a proposal to use ultra-cold atomic hydrogen traps to provide a 100%-polarized electron target for Mo/ller polarimetry

  15. Electronics 2 checkbook

    CERN Document Server

    Knight, S A

    2013-01-01

    Electronics 2 Checkbook is an 11-chapter text that presents problems and worked examples to establish and exemplify the theory contained in technical syllabuses, with a particular emphasis on electronics.The introductory chapters review the elementary theory of semiconductors and the p-n junction diode. The subsequent chapters deal with the applications of diode, the characteristics of bipolar transistors, and the mode of operation of small signal amplifiers. These topics are followed by discussions of the function of the field-effect transistor and power supplies. The concluding chapters expl

  16. Practical electronics handbook

    CERN Document Server

    Sinclair, Ian R

    1988-01-01

    Practical Electronics Handbook, Second Edition covers information useful in electronics, with focus on mathematical conventions. The handbook discusses the passive (resistors, capacitors, band coding, and inductors) and active discrete (diodes, transistors and negative feedback) components; discrete component circuits; and transferring digital data. Linear I.C.s, which are the single-chip arrangements of amplifier circuits that are intended to be biased and operated in a linear way, and digital I.C.s, which process signals and consist of two significant voltage levels, are also considered. T

  17. Electronic devices and circuits

    CERN Document Server

    Pridham, Gordon John

    1972-01-01

    Electronic Devices and Circuits, Volume 3 provides a comprehensive account on electronic devices and circuits and includes introductory network theory and physics. The physics of semiconductor devices is described, along with field effect transistors, small-signal equivalent circuits of bipolar transistors, and integrated circuits. Linear and non-linear circuits as well as logic circuits are also considered. This volume is comprised of 12 chapters and begins with an analysis of the use of Laplace transforms for analysis of filter networks, followed by a discussion on the physical properties of

  18. Innovations in electronic services

    Directory of Open Access Journals (Sweden)

    Dagmara Wach

    2011-12-01

    Full Text Available Summarry Existence in electronic business has become increasingly difficult. High competition and considerable financial resources needed to enter electronic market are the problems of most micro and small sized enterprises, starting or developing their business. Nevertheless, there is a market niche for them, which can ensure success and grant partial financing of the business. This niche are small web projects, providing the customer with personalized service, hitting his tastes and meeting immediate needs. A projects that large websites are unable to perform. Financial sourcing of those projects comes from EU subsidies, in the framework of the Działanie 8.1. PO IG, 2007-2013.

  19. Electronic components and technology

    CERN Document Server

    Sangwine, Stephen

    2007-01-01

    Most introductory textbooks in electronics focus on the theory while leaving the practical aspects to be covered in laboratory courses. However, the sooner such matters are introduced, the better able students will be to include such important concerns as parasitic effects and reliability at the very earliest stages of design. This philosophy has kept Electronic Components and Technology thriving for two decades, and this completely updated third edition continues the approach with a more international outlook.Not only does this textbook introduce the properties, behavior, fabrication, and use

  20. Pulsed Plasma Electron Sources

    Science.gov (United States)

    Krasik, Yakov

    2008-11-01

    Pulsed (˜10-7 s) electron beams with high current density (>10^2 A/cm^2) are generated in diodes with electric field of E > 10^6 V/cm. The source of electrons in these diodes is explosive emission plasma, which limits pulse duration; in the case E Saveliev, J. Appl. Phys. 98, 093308 (2005). Ya. E. Krasik, A. Dunaevsky, and J. Felsteiner, Phys. Plasmas 8, 2466 (2001). D. Yarmolich, V. Vekselman, V. Tz. Gurovich, and Ya. E. Krasik, Phys. Rev. Lett. 100, 075004 (2008). J. Z. Gleizer, Y. Hadas and Ya. E. Krasik, Europhysics Lett. 82, 55001 (2008).

  1. Advances in quantum electronics

    CERN Document Server

    Goodwin, D W

    1974-01-01

    Advances in Quantum Electronics, Volume 2 deals with the effects of quantum mechanics on the behavior of electrons in matter. This book is divided into three chapters. Chapter 1 reviews the statistical properties of optical fields and spectral processing techniques, including the use of photon correlation techniques to measure scattering effects in a number of different media. The use of optical E.P.R. and excitation spectroscopic techniques and techniques for establishing the location of impurity ions in the chalcogenides are describe in Chapter 2. The last chapter surveys the field of mode l

  2. Modern electronic maintenance principles

    CERN Document Server

    Garland, DJ

    2013-01-01

    Modern Electronic Maintenance Principles reviews the principles of maintaining modern, complex electronic equipment, with emphasis on preventive and corrective maintenance. Unfamiliar subjects such as the half-split method of fault location, functional diagrams, and fault finding guides are explained. This book consists of 12 chapters and begins by stressing the need for maintenance principles and discussing the problem of complexity as well as the requirements for a maintenance technician. The next chapter deals with the connection between reliability and maintenance and defines the terms fai

  3. Electronic logic circuits

    CERN Document Server

    Gibson, J

    2013-01-01

    Most branches of organizing utilize digital electronic systems. This book introduces the design of such systems using basic logic elements as the components. The material is presented in a straightforward manner suitable for students of electronic engineering and computer science. The book is also of use to engineers in related disciplines who require a clear introduction to logic circuits. This third edition has been revised to encompass the most recent advances in technology as well as the latest trends in components and notation. It includes a wide coverage of application specific integrate

  4. Auroral electron acceleration

    International Nuclear Information System (INIS)

    Bryant, D.A.

    1989-10-01

    Two theories of auroral electron acceleration are discussed. Part 1 examines the currently widely held view that the acceleration is an ordered process in a quasi-static electric field. It is suggested that, although there are many factors seeming to support this theory, the major qualifications and uncertainties that have been identified combine to cast serious doubt over its validity. Part 2 is devoted to a relatively new interpretation in terms of stochastic acceleration in turbulent electric fields. This second theory, which appears to account readily for most known features of the electron distribution function, is considered to provide a more promising approach to this central question in magnetospheric plasma physics. (author)

  5. Advances in electronic materials

    CERN Document Server

    Kasper, Erich; Grimmeiss, Hermann G

    2008-01-01

    This special-topic volume, Advances in Electronic Materials, covers various fields of materials research such as silicon, silicon-germanium hetero-structures, high-k materials, III-V semiconductor alloys and organic materials, as well as nano-structures for spintronics and photovoltaics. It begins with a brief summary of the formative years of microelectronics; now the keystone of information technology. The latter remains one of the most important global technologies, and is an extremely complex subject-area. Although electronic materials are primarily associated with computers, the internet

  6. Electronics for technicians

    CERN Document Server

    Crane, P W

    2013-01-01

    Electronics for Technicians covers the basic fundamentals of electronics, including the operation of devices and circuits. The book is meant to help the technician to obtain numerical answers to actual circuit problems. This volume consists of seven chapters, the first of which introduces the reader to the basic rules for circuits containing resistive and reactive elements. Charge and discharge of a capacitor through a resistor is discussed, along with charge and discharge of an inductance through a resistance, application of sinusoidal voltages to simple networks, and series and parallel LCR

  7. Superconducting quantum electronics

    International Nuclear Information System (INIS)

    Kose, V.

    1989-01-01

    This book reviews recent accomplishments, presents new results and discusses possible future developments of superconducting quantum electronics and high T c superconductivity. The three main parts of the book deal with fundamentals, sensitive detectors, and precision metrology. New results reported include: correct equivalent circuits modelling superconducting electronic devices; exact solution of the Mattis-Bardeen equations describing various experiments for thin films; complete theoretical description and experimental results for a new broad band spectrum analyzer; a new Josephson junction potentiometer allowing tracing of unknown voltage ratios back to well-known frequency ratios; and fast superconducting SQUID shift registers enabling the production of calculable noise power spectra in the microwave region

  8. VLSI electronics microstructure science

    CERN Document Server

    1981-01-01

    VLSI Electronics: Microstructure Science, Volume 3 evaluates trends for the future of very large scale integration (VLSI) electronics and the scientific base that supports its development.This book discusses the impact of VLSI on computer architectures; VLSI design and design aid requirements; and design, fabrication, and performance of CCD imagers. The approaches, potential, and progress of ultra-high-speed GaAs VLSI; computer modeling of MOSFETs; and numerical physics of micron-length and submicron-length semiconductor devices are also elaborated. This text likewise covers the optical linewi

  9. Electronic health records

    DEFF Research Database (Denmark)

    Kierkegaard, Patrick

    2011-01-01

    that a centralised European health record system will become a reality even before 2020. However, the concept of a centralised supranational central server raises concern about storing electronic medical records in a central location. The privacy threat posed by a supranational network is a key concern. Cross......-border and Interoperable electronic health record systems make confidential data more easily and rapidly accessible to a wider audience and increase the risk that personal data concerning health could be accidentally exposed or easily distributed to unauthorised parties by enabling greater access to a compilation...... of the personal data concerning health, from different sources, and throughout a lifetime....

  10. Electron transfer from electronic excited states to sub-vacuum electron traps in amorphous ice

    International Nuclear Information System (INIS)

    Vichnevetski, E.; Bass, A.D.; Sanche, L.

    2000-01-01

    We investigate the electron stimulated yield of electronically excited argon atoms (Ar * ) from monolayer quantities of Ar deposited onto thin films of amorphous ice. Two peaks of narrow width ( - electron-exciton complex into exciton states, by the transfer of an electron into a sub-vacuum electron state within the ice film. However, the 10.7 eV feature is shifted to lower energy since electron attachment to Ar occurs within small pores of amorphous ice. In this case, the excess electron is transferred into an electron trap below the conduction band of the ice layer

  11. Parasite prevalence, infection intensity and richness in an endangered population, the Atlantic-Gaspésie caribou

    Directory of Open Access Journals (Sweden)

    Geneviève Turgeon

    2018-04-01

    Full Text Available The Atlantic-Gaspésie caribou (Rangifer tarandus caribou population is a small isolated relict herd considered endangered according to the Canadian Species at Risk Act (SARA. This population has low recruitment and survival rates but the potential role of parasites on individual fitness is unknown. In this context, we explored the parasite status of this population with the aim of 1 assessing the occurrence and intensity of parasite infections and the spatial, temporal and individual variations, 2 quantifying parasite richness and investigating factors such as sex and host body condition that may be associated with this variable and 3 evaluating the effects of parasite infections on survival in the Atlantic-Gaspésie caribou population. We examined fecal samples from 32 animals captured in 2013–2014 for eggs, oocysts and larvae of parasites and detected 7 parasite species: dorsal-spined larvae protostrongylids, presumably Parelaphostrongylus andersoni based on PCR identification of a subset, Nematodirus odocoilei and other unidentified Strongyles, Trichuris sp., Capillaria sp., Moniezia sp. and Eimeria sp. For each caribou, mean parasite species richness was 1.8 ± 1.1 (SD. Sex, body condition, year and capture location did not explain parasite prevalence, intensity of infection or richness except for intensity of infection of Capillaria sp. that was positively influenced by body condition. Parasites did not influence survival although mortality was higher for males than for females. We suggest that the relatively low and common gastrointestinal and protostrongylid parasite infections will not be a short-term threat leading to extinction. Keywords: Capillaria, Eimeria, Moniezia, Nematodirinae, Parelaphostrongylus andersoni, Rangifer tarandus

  12. Electron localization in water clusters

    International Nuclear Information System (INIS)

    Landman, U.; Barnett, R.N.; Cleveland, C.L.; Jortner, J.

    1987-01-01

    Electron attachment to water clusters was explored by the quantum path integral molecular dynamics method, demonstrating that the energetically favored localization mode involves a surface state of the excess electron, rather than the precursor of the hydrated electron. The cluster size dependence, the energetics and the charge distribution of these novel electron-cluster surface states are explored. 20 refs., 2 figs., 1 tab

  13. Analyser of sweeping electron beam

    International Nuclear Information System (INIS)

    Strasser, A.

    1993-01-01

    The electron beam analyser has an array of conductors that can be positioned in the field of the sweeping beam, an electronic signal treatment system for the analysis of the signals generated in the conductors by the incident electrons and a display for the different characteristics of the electron beam

  14. Newnes electronics assembly pocket book

    CERN Document Server

    Brindley, Keith

    2013-01-01

    Produced in association with the Engineering Training Authority with contributions from dozens of people in the electronics industry. The material covers common skills in electrical and electronic engineering and concentrates mainly on wiring and assembly. 'Newnes Electronics Assembly Pocket Book' is for electronics technicians, students and apprentices.

  15. The electronic neighbourhood

    DEFF Research Database (Denmark)

    Rüdiger, Bjarne; Tournay, Bruno

    2004-01-01

    This paper presents the results of a 3-year research project. The Electronic Neighbourhood (2000-2004). Researchers have developed and tested a digital model of the urban area and other digital tools for supporting the dialogue and cooperation between professionals and citizens in an urban...

  16. The Electronic Game Gambit.

    Science.gov (United States)

    Bing, Jon

    1982-01-01

    The rapid evolution of today's video games now fills arcades, snack bars, and homes with an array of highly interactive, graphically vivid technical devices. This electronic environment is creating a worldwide communication network. Developments in this area will be beneficial provided that appropriate media policies can be framed. (Author/JN)

  17. Electron microscope studies

    International Nuclear Information System (INIS)

    Crewe, A.V.; Kapp, O.H.

    1990-01-01

    Our laboratory has made significant progress this year in devising improved electron-optical systems, in studying invertebrate hemoglobins with the STEM, and in achieving a workable sub-angstrom STEM. Our goal in electron optics is to improve resolution by producing spherical and chromatic aberration coefficients with signs opposite those of magnetic lenses. We have progressed toward this goal through calculations that explore the addition of electrodes to electron mirrors to reduce these two geometric aberrations and by devising a beam separation system that won't introduce asymmetrical aberrations. Some promising new designs of magnetic lenses for SEM applications have also been investigated. We have continued our exploration of the quaternary structure of the invertebrate hemoglobins and are now among the top laboratories in this area of expertise. In addition, we have overcome many of our electronic difficulties on the sub-angstrom STEM and have made significant progress toward achieving an operational system. The addition of an IBM RISC-6000 workstation to our lab has significantly increased our image processing capabilities

  18. The electron foreshock

    Science.gov (United States)

    Fitzenreiter, R. J.

    1995-01-01

    An overview of the observations of backstreaming electrons in the foreshock and the mechanisms that have been proposed to explain their properties will be presented. A primary characteristic of observed foreshock electrons is that their velocity distributions are spatially structured in a systematic way depending on distance from the magnetic field line which is tangent to the shock. There are two interrelated aspects to explaining the structure of velocity distributions in the foreshock, one involving the acceleration mechanism and the other, propagation from the source to the observing point. First, the source distribution of electrons energized by the shock must be determined along the shock surface. Proposed acceleration mechanisms include magnetic mirroring of incoming solar wind particles and mechanisms involving transmission of particles through the shock. Secondly, the kinematics of observable electrons streaming away from a curved shock with an initial parallel velocity and a downstream perpendicular velocity component due to the motional electric field must be determined. This is the context in which the observations and their explanations will be reviewed.

  19. Using Electronic Portfolios

    Science.gov (United States)

    Page, Deb

    2012-01-01

    The digitized collections of artifacts known as electronic portfolios are creating solutions to a variety of performance improvement needs in ways that are cost-effective and improve both individual and group learning and performance. When social media functionality is embedded in e-portfolios, the tools support collaboration, social learning,…

  20. Electronic procedure distribution

    International Nuclear Information System (INIS)

    Slone, B.J. III; Richardson, C.E.

    1993-01-01

    Printed procedures can offer a mix of text and graphic information that improves readability and increases understanding. A typical procedure uses illustrations and graphics to clarify concepts, a variety of type styles and weights to make it easier to find different topics and sections, white space to improve readability, and familiar navigational clues such as page numbers and topic headers. Initially, electronic procedure systems had limited typeface options, often only a single typeface, with no capability for enhancing readability by varying type size bolding, italicizing, or underlining, and no ability to include graphics. Even recently, many text-only electronic procedures were originally created in a modern What-You-See-Is-What-You-Get (WYSI-WYG) document authoring system, only to be converted to pages and pages of plain type for electronic distribution. Given the choice of paper or on-line producers, most users have chosen paper for its readability. But current-generation electronic document systems that use formatted text and embedded graphics offer users vastly improved readability. Further, they are offering ever-better search tools to enable rapid location of material of interest

  1. International Competitiveness in Electronics.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Office of Technology Assessment.

    This assessment continues the Office of Technology Assessment's (OTA) exploration of the meaning of industrial policy in the United States context, while also examining the industrial policies of several U.S. economic rivals. The major focus is on electronics, an area which virtually defines "high technology" of the 1980's. The…

  2. Power Electronics Thermal Management

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, Gilberto [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-08-07

    Thermal modeling was conducted to evaluate and develop thermal management strategies for high-temperature wide-bandgap (WBG)-based power electronics systems. WBG device temperatures of 175 degrees C to 250 degrees C were modeled under various under-hood temperature environments. Modeling result were used to identify the most effective capacitor cooling strategies under high device temperature conditions.

  3. Electron injection in microtron

    International Nuclear Information System (INIS)

    Axinescu, S.

    1977-01-01

    A review of the methods of injecting electrons in the microtron is presented. A special attention is paid to efficient injection systems developed by Wernholm and Kapitza. A comparison of advantages and disadvantages of both systems is made in relation to the purpose of the microtron. (author)

  4. Transformational silicon electronics

    KAUST Repository

    Rojas, Jhonathan Prieto; Sevilla, Galo T.; Ghoneim, Mohamed T.; Inayat, Salman Bin; Ahmed, Sally; Hussain, Aftab M.; Hussain, Muhammad Mustafa

    2014-01-01

    In today's traditional electronics such as in computers or in mobile phones, billions of high-performance, ultra-low-power devices are neatly integrated in extremely compact areas on rigid and brittle but low-cost bulk monocrystalline silicon (100

  5. ELECTRON COOLING FOR RHIC

    International Nuclear Information System (INIS)

    Ben-Zvi, I.

    2001-01-01

    The Accelerator Collider Department (CAD) at Brookhaven National Laboratory is operating the Relativistic Heavy Ion Collider (RHIC), which includes the dual-ring, 3.834 km circumference superconducting collider and the venerable AGS as the last part of the RHIC injection chain. CAD is planning on a luminosity upgrade of the machine under the designation RHIC II. One important component of the RHIC II upgrade is electron cooling of RHIC gold ion beams. For this purpose, BNL and the Budker Institute of Nuclear Physics in Novosibirsk entered into a collaboration aimed initially at the development of the electron cooling conceptual design, resolution of technical issues, and finally extend the collaboration towards the construction and commissioning of the cooler. Many of the results presented in this paper are derived from the Electron Cooling for RHIC Design Report [1], produced by the, BINP team within the framework of this collaboration. BNL is also collaborating with Fermi National Laboratory, Thomas Jefferson National Accelerator Facility and the University of Indiana on various aspects of electron cooling

  6. ELECTRON COOLING FOR RHIC.

    Energy Technology Data Exchange (ETDEWEB)

    BEN-ZVI,I.

    2001-05-13

    The Accelerator Collider Department (CAD) at Brookhaven National Laboratory is operating the Relativistic Heavy Ion Collider (RHIC), which includes the dual-ring, 3.834 km circumference superconducting collider and the venerable AGS as the last part of the RHIC injection chain. CAD is planning on a luminosity upgrade of the machine under the designation RHIC II. One important component of the RHIC II upgrade is electron cooling of RHIC gold ion beams. For this purpose, BNL and the Budker Institute of Nuclear Physics in Novosibirsk entered into a collaboration aimed initially at the development of the electron cooling conceptual design, resolution of technical issues, and finally extend the collaboration towards the construction and commissioning of the cooler. Many of the results presented in this paper are derived from the Electron Cooling for RHIC Design Report [1], produced by the, BINP team within the framework of this collaboration. BNL is also collaborating with Fermi National Laboratory, Thomas Jefferson National Accelerator Facility and the University of Indiana on various aspects of electron cooling.

  7. Electronic Resource Management Systems

    Directory of Open Access Journals (Sweden)

    Mark Ellingsen

    2004-10-01

    Full Text Available Computer applications which deal with electronic resource management (ERM are quite a recent development. They have grown out of the need to manage the burgeoning number of electronic resources particularly electronic journals. Typically, in the early years of e-journal acquisition, library staff provided an easy means of accessing these journals by providing an alphabetical list on a web page. Some went as far as categorising the e-journals by subject and then grouping the journals either on a single web page or by using multiple pages. It didn't take long before it was recognised that it would be more efficient to dynamically generate the pages from a database rather than to continually edit the pages manually. Of course, once the descriptive metadata for an electronic journal was held within a database the next logical step was to provide administrative forms whereby that metadata could be manipulated. This in turn led to demands for incorporating more information and more functionality into the developing application.

  8. Electron Paramagnetic Resonance Spectroscopy

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 20; Issue 11. Electron Paramagnetic Resonance Spectroscopy: Biological Applications. B G Hegde. General Article Volume 20 Issue 11 November 2015 pp 1017-1032. Fulltext. Click here to view fulltext PDF. Permanent link:

  9. Quantum Hall Electron Nematics

    Science.gov (United States)

    MacDonald, Allan

    In 2D electron systems hosted by crystals with hexagonal symmetry, electron nematic phases with spontaneously broken C3 symmetry are expected to occur in the quantum Hall regime when triplets of Landau levels associated with three different Fermi surface pockets are partially filled. The broken symmetry state is driven by intravalley Coulombic exchange interactions that favor spontaneously polarized valley occupations. I will discuss three different examples of 2D electron systems in which this type of broken symmetry state is expected to occur: i) the SnTe (111) surface, ii) the Bi (111) surface. and iii) unbalanced bilayer graphene. This type of quantum Hall electron nematic state has so far been confirmed only in the Bi (111) case, in which the anisotropic quasiparticle wavefunctions of the broken symmetry state were directly imaged. In the SnTe case the nematic state phase boundary is controlled by a competition between intravalley Coulomb interactions and intervalley scattering processes that increase in relative strength with magnetic field. An in-plane Zeeman field alters the phase diagram by lifting the three-fold Landau level degeneracy, yielding a ground state energy with 2 π/3 periodicity as a function of Zeeman-field orientation angle. I will comment on the possibility of observing similar states in the absence of a magnetic field. Supported by DOE Division of Materials Sciences and Engineering Grant DE-FG03-02ER45958.

  10. Spaceradiation effects on electronics

    International Nuclear Information System (INIS)

    Salminen, Arto.

    1989-01-01

    The failure mechanisms and radiation hardening of electronic devices in spaceborne environment are considered. Radiation hardened components and radiation shielding of electronics are described. Because of the radiation belts and particle radiation from the Sun, the near earth space is hostile to electronics. Besides cosmic radiation represents fully random failure source, against which redundant methods have to be applied. Failures caused by absorbed doses can be dealt with component selection, layout adjustment and addition of absorber. Prepairing for radiation damage presupposes the calculation of absorbed doses and SEU-cross sections from flight parameters. Thus the expected lifetime for spacecraft can be estimated. The above observations belong to the domain of normal routine operation in space electronic engineering and product assurance, which has a crucial meaning in space technology. Devices are to operate years without failure in demanding conditions. The reliable products are result of careful consideration of space environment from the beginning of device design. This applies especially to component selection and circuit design

  11. Wavepacket electron scattering

    International Nuclear Information System (INIS)

    Marks, L.D.

    1986-01-01

    In this note, the formal analysis of the electron wavepacket produced by a STEM instrument is sketched, and some of the diffraction effects briefly described. It is hoped that this will encourage some needed analysis of the complicated inelastic processes occurring in this experimental geometry. 21 references, 3 figures

  12. Inventing the Electronic University

    Science.gov (United States)

    Lewis, David W.

    2015-01-01

    Higher education is confronting a fundamental change. The transition from print on paper to digital and electronic technologies is transforming instruction, scholarly communication, and the storage and preservation of knowledge. What is required is not the automation of old systems, but the restructuring of institutions. The drive for autonomy,…

  13. The electronic stethoscope.

    Science.gov (United States)

    Leng, Shuang; Tan, Ru San; Chai, Kevin Tshun Chuan; Wang, Chao; Ghista, Dhanjoo; Zhong, Liang

    2015-07-10

    Most heart diseases are associated with and reflected by the sounds that the heart produces. Heart auscultation, defined as listening to the heart sound, has been a very important method for the early diagnosis of cardiac dysfunction. Traditional auscultation requires substantial clinical experience and good listening skills. The emergence of the electronic stethoscope has paved the way for a new field of computer-aided auscultation. This article provides an in-depth study of (1) the electronic stethoscope technology, and (2) the methodology for diagnosis of cardiac disorders based on computer-aided auscultation. The paper is based on a comprehensive review of (1) literature articles, (2) market (state-of-the-art) products, and (3) smartphone stethoscope apps. It covers in depth every key component of the computer-aided system with electronic stethoscope, from sensor design, front-end circuitry, denoising algorithm, heart sound segmentation, to the final machine learning techniques. Our intent is to provide an informative and illustrative presentation of the electronic stethoscope, which is valuable and beneficial to academics, researchers and engineers in the technical field, as well as to medical professionals to facilitate its use clinically. The paper provides the technological and medical basis for the development and commercialization of a real-time integrated heart sound detection, acquisition and quantification system.

  14. Electron beam processing system

    International Nuclear Information System (INIS)

    Kashiwagi, Masayuki

    2004-01-01

    Electron beam Processing Systems (EPS) are used as useful and powerful tools in many industrial application fields such as the production of cross-linked wire, rubber tire, heat shrinkable film and tubing, curing, degradation of polymers, sterilization and environmental application. In this paper, the feature and application fields, the selection of machine ratings and safety measures of EPS will be described. (author)

  15. Atom electron scattering

    International Nuclear Information System (INIS)

    Santoso, B.

    1976-01-01

    Green Lippmann-Schwinger functions operator representations, derivation of perturbation method using Green function and atom electron scattering, are discussed. It is concluded that by using complex coordinate places where resonances occur, can be accurately identified. The resonance can be processed further for practical purposes, for example for the separation of atom. (RUW)

  16. Electron-Cyclotron Waves

    NARCIS (Netherlands)

    Westerhof, E.

    1994-01-01

    The essential elements of the theory of electron cyclotron waves are reviewed, The two main electro-magnetic modes of propagation are identified and their dispersion and absorption properties are discussed. The importance of the use of the relativistic resonance condition is stressed.

  17. Superconductivity and electron microscopy

    International Nuclear Information System (INIS)

    Hawkes, P.W.; Valdre, U.

    1977-01-01

    In this review article, two aspects of the role of superconductivity in electron microscopy are examined: (i) the development of superconducting devices (mainly lenses) and their incorporation in electron microscopes; (ii) the development of electron microscope techniques for studying fundamental and technological problems associated with superconductivity. The first part opens with a brief account of the relevant properties of conventional lenses, after which the various types of superconducting lenses are described and their properties compared. The relative merits and inconveniences of superconducting and conventional lenses are examined, particular attention being paid to the spherical and chromatic aberration coefficients at accelerating voltages above a megavolt. This part closes with a survey of the various microscope designs that have been built or proposed, incorporating superconducting components. In the second part, some methods that have been or might be used in the study of superconductivity in the electron microscope are described. A brief account of the types of application for which they are suitable is given. (author)

  18. Scanning electron microscope

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    The principle underlying the design of the scanning electron microscope (SEM), the design and functioning of SEM are described. Its applications in the areas of microcircuitry and materials science are outlined. The development of SEM in India is reviewed. (M.G.B.)

  19. Electron Scattering on deuterium

    International Nuclear Information System (INIS)

    Platchkov, S.

    1987-01-01

    Selected electron scattering experiments on the deuteron system are discussed. The main advantages of the electromagnetic probe are recalled. The deuteron A(q 2 ) structure function is analyzed and found to be very sensitive to the neutron electric form factor. Electrodisintegration of the deuteron near threshold is presented as evidence for the importance of meson exchange currents in nuclei [fr

  20. Adaptive municipal electronic forms

    NARCIS (Netherlands)

    Kuiper, Pieternel; van Dijk, Elisabeth M.A.G.; Bondarouk, Tatiana; Ruel, Hubertus Johannes Maria; Guiderdoni-Jourdain, Karine; Oiry, Ewan

    Adaptation of electronic forms (e-forms) seems to be a step forward to reduce the burden for people who fill in forms. Municipalities more and more offer e-forms online that can be used by citizens to request a municipal product or service or by municipal employees to place a request on behalf of a

  1. Electronic structure of superlattices

    International Nuclear Information System (INIS)

    Altarelli, M.

    1987-01-01

    Calculations of electronic states in semiconductor superlattices are briefly reviewed, with emphasis on the envelope-function method and on comparison with experiments. The energy levels in presence of external magnetic fields are discussed and compared to magneto-optical experiments. (author) [pt

  2. Japan's electronic packaging technologies

    Science.gov (United States)

    Tummala, Rao R.; Pecht, Michael

    1995-02-01

    The JTEC panel found Japan to have significant leadership over the United States in the strategic area of electronic packaging. Many technologies and products once considered the 'heart and soul' of U.S. industry have been lost over the past decades to Japan and other Asian countries. The loss of consumer electronics technologies and products is the most notable of these losses, because electronics is the United States' largest employment sector and is critical for growth businesses in consumer products, computers, automobiles, aerospace, and telecommunications. In the past there was a distinction between consumer and industrial product technologies. While Japan concentrated on the consumer market, the United States dominated the industrial sector. No such distinction is anticipated in the future; the consumer-oriented technologies Japan has dominated are expected to characterize both domains. The future of U.S. competitiveness will, therefore, depend on the ability of the United States to rebuild its technological capabilities in the area of portable electronic packaging.

  3. Parity violating electron scattering

    International Nuclear Information System (INIS)

    McKeown, R.D.

    1990-01-01

    Previous measurements of parity violation in electron scattering are reviewed with particular emphasis on experimental techniques. Significant progress in the attainment of higher precision is evident in these efforts. These pioneering experiments provide a basis for consideration of a future program of such measurements. In this paper some future plans and possibilities in this field are discussed

  4. Electron hopping through proteins

    Czech Academy of Sciences Publication Activity Database

    Warren, J. J.; Ener, M. E.; Vlček, Antonín; Winkler, J. R.; Gray, H. B.

    2012-01-01

    Roč. 256, 21-22 (2012), s. 2478-2487 ISSN 0010-8545 R&D Projects: GA MŠk(CZ) ME10124 Institutional support: RVO:61388955 Keywords : electron transfer * multistep tunneling * hopping maps Subject RIV: CG - Electrochemistry Impact factor: 11.016, year: 2012

  5. MODULATED PLASMA ELECTRON BEAMS

    Energy Technology Data Exchange (ETDEWEB)

    Stauffer, L. H.

    1963-08-15

    Techniques have been developed for producing electron beams of two amperes or more, from a plasma within a hollow cathode. Electron beam energies of 20 kilovolts are readily obtained and power densities of the order of 10,000 kilowatts per square inch can be obtained with the aid of auxiliary electromagnetic focusing. An inert gas atmosphere of a few microns pressure is used to initiate and maintain the beam. Beam intensity increases with both gas pressure and cathode potential but may be controlled by varying the potential of an internal electrode. Under constant pressure and cathode potential the beam intensity may be varied over a wide range by adjusting the potential of the internal control electrode. The effects of cathode design on the volt-ampere characteristics of the beam and the design of control electrodes are described. Also, performance data in both helium and argon are given. A tentative theory of the origin of electrons and of beam formation is proposed. Applications to vacuum metallurgy and to electron beam welding are described and illustrated. (auth)

  6. Accessing Electronic Journals.

    Science.gov (United States)

    McKay, Sharon Cline

    1999-01-01

    Discusses issues librarians need to consider when providing access to electronic journals. Topics include gateways; index and abstract services; validation and pay-per-view; title selection; integration with OPACs (online public access catalogs)or Web sites; paper availability; ownership versus access; usage restrictions; and services offered…

  7. Microchannel electron multiplier

    International Nuclear Information System (INIS)

    Beranek, I.; Janousek, L.; Vitovsky, O.

    1981-01-01

    A microchannel electron multiplier is described for detecting low levels of alpha, beta, soft X-ray and UV radiations. It consists of a glass tube or a system of tubes of various shapes made of common technological glass. The inner tube surface is provided with an active coat with photoemitter and secondary emitter properties. (B.S.)

  8. Electronic Mentoring of Research.

    Science.gov (United States)

    Gregory, Vicki L.

    On July 1, 1991, the ACRL (Association of College and Research Libraries) Research Committee launched a pilot project to mentor academic librarians in their conduct of research. Since the mentors and protegees were potentially from all over the United States, the decision was made to mentor using the electronic conferencing capability of BITNET…

  9. Electronics Book II.

    Science.gov (United States)

    Johnson, Dennis; And Others

    This manual, the second of three curriculum guides for an electronics course, is intended for use in a program combining vocational English as a second language (VESL) with bilingual vocational education. Ten units cover the electrical team, Ohm's law, Watt's law, series resistive circuits, parallel resistive circuits, series parallel circuits,…

  10. Electronic waste recycling techniques

    CERN Document Server

    Bernardes, Andréa

    2015-01-01

    This book presents an overview of the characterization of electronic waste. In addition, processing techniques for the recovery of metals, polymers and ceramics are described. This book serves as a source of information and as an educational technical reference for practicing scientists and engineers, as well as for students.

  11. Electronic Journalism: More Fear?

    Science.gov (United States)

    Terry, Carolyn

    2002-01-01

    Considers how the same First Amendment protections that govern print journalism apply to electronic practitioners. Discusses how the number of broadcast and online journalism classes at the nation's high schools demonstrate steady growth, according to a survey conducted in the fall of 2001 for the Radio and Television News Directors Foundation.…

  12. Interatomic Coulombic electron capture

    International Nuclear Information System (INIS)

    Gokhberg, K.; Cederbaum, L. S.

    2010-01-01

    In a previous publication [K. Gokhberg and L. S. Cederbaum, J. Phys. B 42, 231001 (2009)] we presented the interatomic Coulombic electron capture process--an efficient electron capture mechanism by atoms and ions in the presence of an environment. In the present work we derive and discuss the mechanism in detail. We demonstrate thereby that this mechanism belongs to a family of interatomic electron capture processes driven by electron correlation. In these processes the excess energy released in the capture event is transferred to the environment and used to ionize (or to excite) it. This family includes the processes where the capture is into the lowest or into an excited unoccupied orbital of an atom or ion and proceeds in step with the ionization (or excitation) of the environment, as well as the process where an intermediate autoionizing excited resonance state is formed in the capturing center which subsequently deexcites to a stable state transferring its excess energy to the environment. Detailed derivation of the asymptotic cross sections of these processes is presented. The derived expressions make clear that the environment assisted capture processes can be important for many systems. Illustrative examples are presented for a number of model systems for which the data needed to construct the various capture cross sections are available in the literature.

  13. Electron Paramagnetic Resonance Imaging

    Indian Academy of Sciences (India)

    Twentieth century bore witness to remarkable scientists whohave advanced our understanding of the brain. Among them,EPR (Electron Paramagnetic Resonance) imaging is particularlyuseful in monitoring hypoxic zones in tumors which arehighly resistant to radiation and chemotherapeutic treatment.This first part of the ...

  14. Electronic transport properties

    International Nuclear Information System (INIS)

    Young, W.H.

    1985-01-01

    The theory of the electron transport properties of liquid alkali metals is described. Conductivity coefficients, Boltzmann theory, Ziman theory, alkali form factors, Ziman theory and alkalis, Faber-Ziman alloy theory, Faber-Ziman theory and alkali-alkali methods, status of Ziman theory, and other transport properties, are all discussed. (UK)

  15. Forensic Scanning Electron Microscope

    Science.gov (United States)

    Keeley, R. H.

    1983-03-01

    The scanning electron microscope equipped with an x-ray spectrometer is a versatile instrument which has many uses in the investigation of crime and preparation of scientific evidence for the courts. Major applications include microscopy and analysis of very small fragments of paint, glass and other materials which may link an individual with a scene of crime, identification of firearms residues and examination of questioned documents. Although simultaneous observation and chemical analysis of the sample is the most important feature of the instrument, other modes of operation such as cathodoluminescence spectrometry, backscattered electron imaging and direct x-ray excitation are also exploited. Marks on two bullets or cartridge cases can be compared directly by sequential scanning with a single beam or electronic linkage of two instruments. Particles of primer residue deposited on the skin and clothing when a gun is fired can be collected on adhesive tape and identified by their morphology and elemental composition. It is also possible to differentiate between the primer residues of different types of ammunition. Bullets may be identified from the small fragments left behind as they pass through the body tissues. In the examination of questioned documents the scanning electron microscope is used to establish the order in which two intersecting ink lines were written and to detect traces of chemical markers added to the security inks on official documents.

  16. ELECTRONIC RESEARCH NOTEBOOKS

    Science.gov (United States)

    The paper details the public availability of Electronic notebooks (EN) and an example of a system in use within a research laboratory in the Office of Research and Development. Research notebooks contain intellectual property which must be guarded until it can be disseminated wit...

  17. Electronic ripple indicator

    Science.gov (United States)

    Davidson, J. K.; Houck, W. H.

    1971-01-01

    Electronic circuit for monitoring excessive ripple voltage on dc power lines senses voltage variations from few millivolts to maximum of 10 volts rms. Instrument is used wherever power supply fluctuations might endanger system operations or damage equipment. Device is inexpensive and easily packaged in small chassis.

  18. Electron energies in metals

    International Nuclear Information System (INIS)

    Mahan, G.D.; Tennessee Univ., Knoxville, TN

    1991-01-01

    The modern era of electron-electron interactions began a decade ago. Plummer's group initiated a program of using angular resolved photoemission to examine the band structure of the simple metals. Beginning with aluminum, and carrying on to sodium and potassium, they always found that the occupied energy bands were much narrower than expected. For example, the compressed energy bands for metallic potassium suggest a band effective mass of m* = 1.33m e . This should be compared to the band mass found from optical conductivity m*/m e = 1.01 ± 0.01. The discrepancy between these results is startling. It was this great difference which started my group doing calculations. Our program was two-fold. On one hand, we reanalyzed the experimental data, in order to see if Plummer's result was an experimental artifact. On the other hand, we completely redid the electron-electron self-energy calculations for simple metals, using the most modern choices of local-field corrections and vertex corrections. Our results will be reported in these lectures. They can be summarized as following: Our calculations give the same effective masses as the older calculations, so the theory is relatively unchanged; Our analysis of the experiments suggests that the recent measurements of band narrowing are an experimental artifact. 38 refs., 9 figs

  19. The electronic structures of solids

    CERN Document Server

    Coles, B R

    2013-01-01

    The Electronic Structures of Solids aims to provide students of solid state physics with the essential concepts they will need in considering properties of solids that depend on their electronic structures and idea of the electronic character of particular materials and groups of materials. The book first discusses the electronic structure of atoms, including hydrogen atom and many-electron atom. The text also underscores bonding between atoms and electrons in metals. Discussions focus on bonding energies and structures in the solid elements, eigenstates of free-electron gas, and electrical co

  20. Electron beams in radiation therapy

    International Nuclear Information System (INIS)

    Bruinvis, I.A.D.

    1987-01-01

    Clinical electron beams in interaction with beam flattening and collimating devices are studied, in order to obtain the means for adequate electron therapy. A treatment planning method for arbitrary field shapes is developed that takes the properties of the collimated electron beams into account. An electron multiple-scattering model is extended to incorporate a model for the loss of electrons with depth, in order to improve electron beam dose planning. A study of ionisation measurements in two different phantom materials yields correction factors for electron beam dosimetry. (Auth.)