WorldWideScience

Sample records for randomly oriented nanowire

  1. Graded index and randomly oriented core-shell silicon nanowires for broadband and wide angle antireflection

    Directory of Open Access Journals (Sweden)

    P. Pignalosa

    2011-09-01

    Full Text Available Antireflection with broadband and wide angle properties is important for a wide range of applications on photovoltaic cells and display. The SiOx shell layer provides a natural antireflection from air to the Si core absorption layer. In this work, we have demonstrated the random core-shell silicon nanowires with both broadband (from 400nm to 900nm and wide angle (from normal incidence to 60º antireflection characteristics within AM1.5 solar spectrum. The graded index structure from the randomly oriented core-shell (Air/SiOx/Si nanowires may provide a potential avenue to realize a broadband and wide angle antireflection layer.

  2. Oriented epitaxial TiO2 nanowires for water splitting

    Science.gov (United States)

    Hou, Wenting; Cortez, Pablo; Wuhrer, Richard; Macartney, Sam; Bozhilov, Krassimir N.; Liu, Rong; Sheppard, Leigh R.; Kisailus, David

    2017-06-01

    Highly oriented epitaxial rutile titanium dioxide (TiO2) nanowire arrays have been hydrothermally grown on polycrystalline TiO2 templates with their orientation dependent on the underlying TiO2 grain. Both the diameter and areal density of the nanowires were tuned by controlling the precursor concentration, and the template surface energy and roughness. Nanowire tip sharpness was influenced by precursor solubility and diffusivity. A new secondary ion mass spectrometer technique has been developed to install additional nucleation sites in single crystal TiO2 templates and the effect on nanowire growth was probed. Using the acquired TiO2 nanowire synthesis knowhow, an assortment of nanowire arrays were installed upon the surface of undoped TiO2 photo-electrodes and assessed for their photo-electrochemical water splitting performance. The key result obtained was that the presence of short and dispersed nanowire arrays significantly improved the photocurrent when the illumination intensity was increased from 100 to 200 mW cm-2. This is attributed to the alignment of the homoepitaxially grown nanowires to the [001] direction, which provides the fastest charge transport in TiO2 and an improved pathway for photo-holes to find water molecules and undertake oxidation. This result lays a foundation for achieving efficient water splitting under conditions of concentrated solar illumination.

  3. Epitaxy-enabled vapor-liquid-solid growth of tin-doped indium oxide nanowires with controlled orientations

    KAUST Repository

    Shen, Youde

    2014-08-13

    Controlling the morphology of nanowires in bottom-up synthesis and assembling them on planar substrates is of tremendous importance for device applications in electronics, photonics, sensing and energy conversion. To date, however, there remain challenges in reliably achieving these goals of orientation-controlled nanowire synthesis and assembly. Here we report that growth of planar, vertical and randomly oriented tin-doped indium oxide (ITO) nanowires can be realized on yttria-stabilized zirconia (YSZ) substrates via the epitaxy-assisted vapor-liquid-solid (VLS) mechanism, by simply regulating the growth conditions, in particular the growth temperature. This robust control on nanowire orientation is facilitated by the small lattice mismatch of 1.6% between ITO and YSZ. Further control of the orientation, symmetry and shape of the nanowires can be achieved by using YSZ substrates with (110) and (111), in addition to (100) surfaces. Based on these insights, we succeed in growing regular arrays of planar ITO nanowires from patterned catalyst nanoparticles. Overall, our discovery of unprecedented orientation control in ITO nanowires advances the general VLS synthesis, providing a robust epitaxy-based approach toward rational synthesis of nanowires. © 2014 American Chemical Society.

  4. Synthesis, Magnetic Anisotropy and Optical Properties of Preferred Oriented Zinc Ferrite Nanowire Arrays

    Directory of Open Access Journals (Sweden)

    Xu Yan

    2010-01-01

    Full Text Available Abstract Preferred oriented ZnFe2O4 nanowire arrays with an average diameter of 16 nm were fabricated by post-annealing of ZnFe2 nanowires within anodic aluminum oxide templates in atmosphere. Selected area electron diffraction and X-ray diffraction exhibit that the nanowires are in cubic spinel-type structure with a [110] preferred crystallite orientation. Magnetic measurement indicates that the as-prepared ZnFe2O4 nanowire arrays reveal uniaxial magnetic anisotropy, and the easy magnetization direction is parallel to the axis of nanowire. The optical properties show the ZnFe2O4 nanowire arrays give out 370–520 nm blue-violet light, and their UV absorption edge is around 700 nm. The estimated values of direct and indirect band gaps for the nanowires are 2.23 and 1.73 eV, respectively.

  5. Features of Random Metal Nanowire Networks with

    KAUST Repository

    Maloth, Thirupathi

    2017-05-01

    Among the alternatives to conventional Indium Tin Oxide (ITO) used in making transparent conducting electrodes, the random metal nanowire (NW) networks are considered to be superior offering performance at par with ITO. The performance is measured in terms of sheet resistance and optical transmittance. However, as the electrical properties of such random networks are achieved thanks to a percolation network, a minimum size of the electrodes is needed so it actually exceeds the representative volume element (RVE) of the material and the macroscopic electrical properties are achieved. There is not much information about the compatibility of this minimum RVE size with the resolution actually needed in electronic devices. Furthermore, the efficiency of NWs in terms of electrical conduction is overlooked. In this work, we address the above industrially relevant questions - 1) The minimum size of electrodes that can be made based on the dimensions of NWs and the material coverage. For this, we propose a morphology based classification in defining the RVE size and we also compare the same with that is based on macroscopic electrical properties stabilization. 2) The amount of NWs that do not participate in electrical conduction, hence of no practical use. The results presented in this thesis are a design guide to experimentalists to design transparent electrodes with more optimal usage of the material.

  6. Gibbs–Thomson Effect in Planar Nanowires: Orientation and Doping Modulated Growth

    KAUST Repository

    Shen, Youde

    2016-06-02

    Epitaxy-enabled bottom-up synthesis of self-assembled planar nanowires via the vapor-liquid-solid mechanism is an emerging and promising approach toward large-scale direct integration of nanowire-based devices without postgrowth alignment. Here, by examining large assemblies of indium tin oxide nanowires on yttria-stabilized zirconia substrate, we demonstrate for the first time that the growth dynamics of planar nanowires follows a modified version of the Gibbs-Thomson mechanism, which has been known for the past decades to govern the correlations between thermodynamic supersaturation, growth speed, and nanowire morphology. Furthermore, the substrate orientation strongly influences the growth characteristics of epitaxial planar nanowires as opposed to impact at only the initial nucleation stage in the growth of vertical nanowires. The rich nanowire morphology can be described by a surface-energy-dependent growth model within the Gibbs-Thomson framework, which is further modulated by the tin doping concentration. Our experiments also reveal that the cutoff nanowire diameter depends on the substrate orientation and decreases with increasing tin doping concentration. These results enable a deeper understanding and control over the growth of planar nanowires, and the insights will help advance the fabrication of self-assembled nanowire devices. © 2016 American Chemical Society.

  7. Modulation of fluorescence signals from biomolecules along nanowires due to interaction of light with oriented nanostructures

    DEFF Research Database (Denmark)

    Frederiksen, Rune Schøneberg; Alarcon-Llado, Esther; Madsen, Morten H.

    2015-01-01

    High aspect ratio nanostructures have gained increasing interest as highly sensitive platforms for biosensing. Here, well-defined biofunctionalized vertical indium arsenide nanowires are used to map the interaction of light with nanowires depending on their orientation and the excitation waveleng...

  8. Chemical synthesis of oriented ferromagnetic LaSr-2 × 4 manganese oxide molecular sieve nanowires.

    Science.gov (United States)

    Carretero-Genevrier, Adrián; Gazquez, Jaume; Magén, César; Varela, María; Ferain, Etienne; Puig, Teresa; Mestres, Narcís; Obradors, Xavier

    2012-06-25

    We report a chemical solution based method using nanoporous track-etched polymer templates for producing long and oriented LaSr-2 × 4 manganese oxide molecular sieve nanowires. Scanning transmission electron microscopy and electron energy loss spectroscopy analyses show that the nanowires are ferromagnetic at room temperature, single crystalline, epitaxially grown and self-aligned.

  9. A semi-continuum model on vibration frequency of silicon nanowires in <111> orientation

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Hong, E-mail: h-yu@seu.edu.cn; Chen, Hong-Bo [Key Lab of MEMS of Ministry of Education, Nanjing, Jiangsu, 210096 (China)

    2016-06-15

    In this article, a new semi-continuum model is built to describe the fundamental vibration frequency of the silicon nanowires in <111> orientation. The Keating potential model and the discrete nature in the width and the thickness direction of the silicon nanowires in <111> orientation are applied in the new semi-continuum model. Based on the Keating model and the principle of conservation of energy, the vibration frequency of the silicon nanowires with the triangle, the rhombus, and the hexagon cross sections are derived. It is indicated that the calculation results based on this new model are accordant with the simulation results of the software based on molecular dynamics (MD).

  10. Electro-orientation of a metal nanowire counterbalanced by thermal torques.

    Science.gov (United States)

    Arcenegui, Juan J; García-Sánchez, Pablo; Morgan, Hywel; Ramos, Antonio

    2014-06-01

    The rotational diffusion of electrically polarized metal nanowires suspended in an electrolyte is studied. The alignment of a Brownian nanowire in an ac field with a given direction is not complete due to thermal (fluctuating) torques. The orientation distribution allows us to examine the electrokinetic torques acting on the nanowire for smaller voltages than in previous deterministic experiments. In addition, the torques are obtained without recurring to the rotational friction coefficient as in dynamic deterministic experiments. The present results are in accordance with previous deterministic results of electro-orientation of metal nanowires. Nanowire rotation is originated by both the electrical torque on the induced dipole and by induced-charge electro-osmotic flow around the particle. At low frequencies of the applied ac field, induced-charge electro-osmotic orientation dominates while induced dipole torque orientation dominates at high frequencies. The angular standard deviation and the rotational rate are calculated from the measured fluctuating angle as a function of time, and good agreement with theoretical predictions is found. The experiments at high frequency indicate that the electrical torque on a nanowire near an insulating wall is reduced with respect to the bulk.

  11. Structures and orientation-dependent interaction forces of titania nanowires using molecular dynamics simulations

    Science.gov (United States)

    Okeke, George; Antony, S. Joseph; Hammond, Robert B.; Ahmed, Kamran

    2017-07-01

    Engineering nanowires to develop new products and processes is highly topical due to their ability to provide highly enhanced physical, chemical, mechanical, thermal and electrical properties. In this work, using molecular dynamics simulations, we report fundamental information, about the structural and thermodynamic properties of individual anatase titania (TiO2) nanowires with cross-sectional diameters between 2 and 6 nm, and aspect ratio (length to diameter) of 6:1 at temperatures ranging from 300 to 3000 K. Estimates of the melting transition temperature of the nanowires are between 2000 and 2500 K. The melting transition temperature predicted from the radial distribution functions (RDFs) shows strong agreement with those predicted from the total energy profiles. Overall, the transition temperature is in reasonable agreement with melting points predicted from experiments and simulations reported in the literature for spherical nanoparticles of similar sizes. Hence, the melting transition temperature of TiO2 nanowires modelled here can be considered as shape independent. Furthermore, for the first time based on MD simulations, interaction forces between two nanowires are reported at ambient temperature (300 K) for different orientations: parallel, perpendicular and end-to-end. It is observed that end-to-end orientations manifested the strongest attraction forces, while the parallel and perpendicular orientations displayed weaker attractions. The results reported here could form a foundation in future multiscale modelling studies of the structured titania nanowire assemblies, depending on the inter-wire interaction forces.

  12. Influence of substrate orientation on the structural quality of GaAs nanowires in molecular beam epitaxy

    Science.gov (United States)

    Zhang, Zhi; Shi, Sui-Xing; Chen, Ping-Ping; Lu, Wei; Zou, Jin

    2015-01-01

    In this study, the effect of substrate orientation on the structural quality of Au-catalyzed epitaxial GaAs nanowires grown by a molecular beam epitaxy reactor has been investigated. It was found that the substrate orientations can be used to manipulate the nanowire catalyst composition and the catalyst surface energy and, therefore, to alter the structural quality of GaAs nanowires grown on different substrates. Defect-free wurtzite-structured GaAs nanowires grown on the GaAs (110) substrate have been achieved under our growth conditions.

  13. Orientation symmetry breaking in self-assembled Ce1-xGdxO2-y nanowires derived from chemical solutions

    OpenAIRE

    Queraltó, Albert; Mata, Maria de la; Martínez, L.; Magén, César; Gibert, M; Arbiol, Jordi; Hühne, R; Obradors Berenguer, Xavier; Puig Molina, Teresa

    2016-01-01

    Understanding the growth mechanisms of nanostructures obtained from chemical solutions, a high-throughput production methodology, is essential to correlate precisely the growth conditions with the nanostructures' morphology, dimensions and orientation. It is shown that self-organized (011)-oriented CeGdO (CGO) nanowires having a single in-plane orientation are achieved when an anisotropic (011)-LaAlO (LAO) substrate is chosen. STEM and AFM images of the epitaxial nanowires reveal the (001)CGO...

  14. Easy growth of undoped and doped tungsten oxide nanowires with high purity and orientation

    Science.gov (United States)

    Liu, Kun; Foord, David T.; Scipioni, Lawrence

    2005-01-01

    An economic method is presented to grow undoped/doped tungsten oxide nanowires with high purity and erect orientation, simply by heating a tungsten filament in a vacuum chamber with some room air leakage. Tungsten oxide nanowires were studied using scanning electron microscopy (SEM), energy dispersion x-ray spectroscopy (EDS) and transmission electron microscopy (TEM). Wires are found standing straight and clean on the filament, {\\sim }30 nm in diameter and up to a few tens of micrometres long. The composition along the wire is uniform for all elements including dopants.

  15. Orientation-Dependent Exciton-Plasmon Coupling in Embedded Organic/Metal Nanowire Heterostructures.

    Science.gov (United States)

    Li, Yong Jun; Hong, Yan; Peng, Qian; Yao, Jiannian; Zhao, Yong Sheng

    2017-10-24

    The excitation of surface plasmons by optical emitters based on exciton-plasmon coupling is important for plasmonic devices with active optical properties. It has been theoretically demonstrated that the orientation of exciton dipole can significantly influence the coupling strength, yet systematic study of the coupling process in nanostructures is still hindered by the lack of proper material systems. In this work, we have experimentally investigated the orientation-dependent exciton-plasmon coupling in a rationally designed organic/metal nanowire heterostructure system. The heterostructures were prepared by inserting silver nanowires into crystalline organic waveguides during the self-assembly of dye molecules. Structures with different exciton orientations exhibited varying coupling efficiencies. The near-field exciton-plasmon coupling facilitates the design of nanophotonic devices based on the directional surface plasmon polariton propagations.

  16. Boosting Hole Mobility in Coherently Strained [110]-Oriented Ge-Si Core-Shell Nanowires.

    Science.gov (United States)

    Conesa-Boj, S; Li, A; Koelling, S; Brauns, M; Ridderbos, J; Nguyen, T T; Verheijen, M A; Koenraad, P M; Zwanenburg, F A; Bakkers, E P A M

    2017-04-12

    The ability of core-shell nanowires to overcome existing limitations of heterostructures is one of the key ingredients for the design of next generation devices. This requires a detailed understanding of the mechanism for strain relaxation in these systems in order to eliminate strain-induced defect formation and thus to boost important electronic properties such as carrier mobility. Here we demonstrate how the hole mobility of [110]-oriented Ge-Si core-shell nanowires can be substantially enhanced thanks to the realization of large band offset and coherent strain in the system, reaching values as high as 4200 cm2/(Vs) at 4 K and 1600 cm2/(Vs) at room temperature for high hole densities of 1019 cm-3. We present a direct correlation of (i) mobility, (ii) crystal direction, (iii) diameter, and (iv) coherent strain, all of which are extracted in our work for individual nanowires. Our results imply [110]-oriented Ge-Si core-shell nanowires as a promising candidate for future electronic and quantum transport devices.

  17. Orientation-dependent interfacial mobility governs the anisotropic swelling in lithiated silicon nanowires.

    Science.gov (United States)

    Yang, Hui; Huang, Shan; Huang, Xu; Fan, Feifei; Liang, Wentao; Liu, Xiao Hua; Chen, Long-Qing; Huang, Jian Yu; Li, Ju; Zhu, Ting; Zhang, Sulin

    2012-04-11

    Recent independent experiments demonstrated that the lithiation-induced volume expansion in silicon nanowires, nanopillars, and microslabs is highly anisotropic, with predominant expansion along the direction but negligibly small expansion along the direction. The origin of such anisotropic behavior remains elusive. Here, we develop a chemomechanical model to study the phase evolution and morphological changes in lithiated silicon nanowires. The model couples the diffusive reaction of lithium with the lithiation-induced elasto-plastic deformation. We show that the apparent anisotropic swelling is critically controlled by the orientation-dependent mobility of the core-shell interface, i.e., the lithiation reaction rate at the atomically sharp phase boundary between the crystalline core and the amorphous shell. Our results also underscore the importance of structural relaxation by plastic flow behind the moving phase boundary, which is essential to quantitative prediction of the experimentally observed morphologies of lithiated silicon nanowires. The study sheds light on the lithiation-mediated failure in nanowire-based electrodes, and the modeling framework provides a basis for simulating the morphological evolution, stress generation, and fracture in high-capacity electrodes for the next-generation lithium-ion batteries. © 2012 American Chemical Society

  18. Flexible, Transparent, and Conductive Film Based on Random Networks of Ag Nanowires

    Directory of Open Access Journals (Sweden)

    Shunhua Wang

    2013-01-01

    Full Text Available Flexible, transparent, and conductive films based on random networks of Ag nanowires were prepared by vacuum-filtrating method. The size of Ag nanowires prepared by hydrothermal method is uniform, with a relatively smaller diameter and a longer length, thereby achieving a high aspect ratio (>1000. The films fabricated by Ag nanowires exhibit the excellent transparency with a 92% optical transmittance and a low surface resistivity of 11 Ωsq−1. Importantly, both the transmittance and sheet resistance decrease with the increasing of the Ag nanowires contents. When the contents of Ag nanowires are up to 200 mg/m2 especially, the surface resistivity quickly falls below 5 Ωsq−1. Also, these films are robust, which have almost no change in sheet resistance after the repeating bends over 200 cycles. These encouraging results may have a potential application in flexible and transparent electronics and other heating systems.

  19. Effects of twin orientation and spacing on the mechanical properties of Cu nanowires.

    Science.gov (United States)

    Yang, Zhenyu; Zheng, Lingli; Yue, Yonghai; Lu, Zixing

    2017-08-30

    The role of twin orientation in mechanical behaviors of nanomaterials is drawing increasing attention. In this paper, atomistic simulations on the tensile deformation of twinned Cu nanowires (NWs) are implemented to investigate the twin orientation and spacing effects. The results of numerical simulations reveal that the tensile deformation mechanisms can be divided into three types with the twin orientation varying from 0° to 90°: dislocations slip intersecting with twin boundary (TB), stacking faults formed parallel to the TB and TB migration. Detail analysis about dislocation motion is carried out to illustrate the plastic deformation mechanisms. In addition, with the increasing of the TB spacing, there is a transition from yield with strain hardening to yield with nearly constant flow stress. The peak stress decreases with the increase of TB spacing, which can be attributed to surface roughness caused by crystal reorientation. Our findings also suggest a possible approach to tune the mechanical behaviors of low dimensional nanostructures.

  20. Resistance Fluctuations in GaAs Nanowire Grids

    Directory of Open Access Journals (Sweden)

    Ivan Marasović

    2014-01-01

    Full Text Available We present a numerical study on resistance fluctuations in a series of nanowire-based grids. Each grid is made of GaAs nanowires arranged in parallel with metallic contacts crossing all nanowires perpendicularly. Electrical properties of GaAs nanowires known from previous experimental research are used as input parameters in the simulation procedure. Due to the nonhomogeneous doping, the resistivity changes along nanowire. Allowing two possible nanowire orientations (“upwards” or “downwards”, the resulting grid is partially disordered in vertical direction which causes resistance fluctuations. The system is modeled using a two-dimensional random resistor network. Transfer-matrix computation algorithm is used to calculate the total network resistance. It is found that probability density function (PDF of resistance fluctuations for a series of nanowire grids changes from Gaussian behavior towards the Bramwell-Holdsworth-Pinton distribution when both nanowire orientations are equally represented in the grid.

  1. Orientation Effects in Ballistic High-Strained P-type Si Nanowire FETs

    Directory of Open Access Journals (Sweden)

    Hong Yu

    2009-04-01

    Full Text Available In order to design and optimize high-sensitivity silicon nanowire-field-effect transistor (SiNW FET pressure sensors, this paper investigates the effects of channel orientations and the uniaxial stress on the ballistic hole transport properties of a strongly quantized SiNW FET placed near the high stress regions of the pressure sensors. A discrete stress-dependent six-band k.p method is used for subband structure calculation, coupled to a two-dimensional Poisson solver for electrostatics. A semi-classical ballistic FET model is then used to evaluate the ballistic current-voltage characteristics of SiNW FETs with and without strain. Our results presented here indicate that [110] is the optimum orientation for the p-type SiNW FETs and sensors. For the ultra-scaled 2.2 nm square SiNW, due to the limit of strong quantum confinement, the effect of the uniaxial stress on the magnitude of ballistic drive current is too small to be considered, except for the [100] orientation. However, for larger 5 nm square SiNW transistors with various transport orientations, the uniaxial tensile stress obviously alters the ballistic performance, while the uniaxial compressive stress slightly changes the ballistic hole current. Furthermore, the competition of injection velocity and carrier density related to the effective hole masses is found to play a critical role in determining the performance of the nanotransistors.

  2. Silicon oxide nanowires: facile and controlled large area fabrication of vertically oriented silicon oxide nanowires for photoluminescence and sensor applications.

    Science.gov (United States)

    Alabi, Taiwo R; Yuan, Dajun; Bucknall, David; Das, Suman

    2013-09-25

    We describe a technique for the fabrication of dense and patterned arrays of aligned silicon oxide nanowires for applications in surface modification, optoelectronic, and electromechanical based devices. Conventional techniques for the fabrication of silicon oxide nanowires based on the vapor-liquid-solid (VLS) chemical vapor deposition (CVD) processes involve the use of high temperatures and catalysts. We demonstrate a technique that extends the use of a plasma thermal reactive ion etching for the fabrication of aligned silicon oxide nanowires with aspect ratios extending up to 20 and lengths exceeding 1 μm. The process incorporates phase separated PS-b-P4VP block copolymer loaded with an iron salt. The iron salt preferentially segregates into the P4VP layer and during an O2 etch is not removed but forms a hexagonally packed array on the silicon oxide substrate. Further etching with CHF3/O2 gas mixture over time can generate nanodots, to nanopillars, and then nanowires of silicon oxide. The photoluminescence property of the as-fabricated nanowire arrays as well as the parasitic ferromagnetic effect from the iron oxide-tipped section of the wires resulting in coalescence under an scanning electron microscope (SEM) are demonstrated. This technique is simpler compared to existing VLS fabrication approaches and can be used for the direct fabrication of patterned arrays of nanowires when a laser interference ablation step is incorporated into the fabrication procedure.

  3. Influence of substrate orientation on exciton fine structure splitting of InAs/InP nanowire quantum dots.

    Science.gov (United States)

    Zieliński, Michał

    2012-05-22

    : In this paper, we use an atomistic approach to investigate strain distributions, single particle and many body electronic properties of InAs/InP nanowire quantum dots with substrate orientation varying from [111] to high-index [119], and compared with [001] case. We show that single particle gap for high-index [11k] substrates is increased with respect to [111] and [001] cases, and oscillates with the substrate index due to faceting effects. Surprisingly, the overall shell-like structure of single particle states is preserved even for highly facetted, high-index substrates. On the contrary, we demonstrate that besides two limiting high-symmetry cases, [001] and [111], the bright exciton splitting varies strongly with substrate orientation. For [112]-oriented substrate, the fine structure splitting reaches maximum due to crystal lattice anisotropy despite fully cylindrical isotropic shape of nanowire quantum dot.

  4. Cs/NF3 adsorption on [001]-oriented GaN nanowire surface: A first principle calculation

    Science.gov (United States)

    Diao, Yu; Liu, Lei; Xia, Sihao; Kong, Yike

    2017-11-01

    In this study, the adsorption mechanism of Cs/NF3 on the [001]-oriented GaN nanowire surface is investigated by using the density function theory based on first-principles. In the Cs/NF3 co-activation process, the system is inclined to form NF3-in structure. Through the calculation results of adsorption energy, NF3 molecule adsorption tends to take an orientation with F atoms on top and the most favorable adsorption site is BGa-N. The NF3 activation process can further cut down the work function of the Cs-covered nanowire surface only when Cs coverage is 0.75 ML and 1 ML, which can be explained by the double dipole moment theory. With increasing Cs coverage, the valence band and conduction band both shift to lower energy side, contributing to the appearance of a downward band bending region and promoting the escape of surface photoelectrons. After NF3 molecule adsorption, the peak of total density of states near Fermi level increase due to the orbital hybridization between NF3-2s, Cs-5s states and N-2p states, which strengthen the conductivity of the nanowire surface and leads to the metallic properties. All these calculations may direct the Cs/NF3 activation process of GaN nanowire optoelectronic devices.

  5. Morphology- and orientation-controlled gallium arsenide nanowires on silicon substrates.

    Science.gov (United States)

    Ihn, Soo-Ghang; Song, Jong-In; Kim, Tae-Wook; Leem, Dong-Seok; Lee, Takhee; Lee, Sang-Geul; Koh, Eui Kwan; Song, Kyung

    2007-01-01

    GaAs nanowires were epitaxially grown on Si(001) and Si(111) substrates by using Au-catalyzed vapor-liquid-solid (VLS) growth in a solid source molecular beam epitaxy system. Scanning electron microscopy analysis revealed that almost all the GaAs nanowires were grown along directions on both Si substrates for growth conditions investigated. The GaAs nanowires had a very uniform diameter along the growth direction. X-ray diffraction data and transmission electron microscopy analysis revealed that the GaAs nanowires had a mixed crystal structure of the hexagonal wurtzite and the cubic zinc-blende. Current-voltage characteristics of junctions formed by the epitaxially grown GaAs nanowires and the Si substrate were investigated by using a current-sensing atomic force microscopy.

  6. Surface Plasmon Resonance Temperature Sensor Based on Photonic Crystal Fibers Randomly Filled with Silver Nanowires

    Directory of Open Access Journals (Sweden)

    Nannan Luan

    2014-08-01

    Full Text Available We propose a temperature sensor design based on surface plasmon resonances (SPRs supported by filling the holes of a six-hole photonic crystal fiber (PCF with a silver nanowire. A liquid mixture (ethanol and chloroform with a large thermo-optic coefficient is filled into the PCF holes as sensing medium. The filled silver nanowires can support resonance peaks and the peak will shift when temperature variations induce changes in the refractive indices of the mixture. By measuring the peak shift, the temperature change can be detected. The resonance peak is extremely sensitive to temperature because the refractive index of the filled mixture is close to that of the PCF material. Our numerical results indicate that a temperature sensitivity as high as 4 nm/K can be achieved and that the most sensitive range of the sensor can be tuned by changing the volume ratios of ethanol and chloroform. Moreover, the maximal sensitivity is relatively stable with random filled nanowires, which will be very convenient for the sensor fabrication.

  7. Optical and Electrical Studies of Vertically Oriented Tellurium Nanowire Arrays Produced by Template Electrodeposition

    Science.gov (United States)

    Kumar, Narinder; Kumar, Rajesh; Kumar, Sushil; Chakarvarti, S. K.

    2015-08-01

    We report the fabrication of highly ordered arrays of tellurium nanowires and investigate their electrical, optical and structural properties. The tellurium nanowire arrays were synthesized by electrochemical deposition via a template method and characterized by x-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and UV-Visible spectroscopy. The XRD and FESEM characterizations confirm the formation of a dense crop of tellurium nanowire arrays with hexagonal phase. The intense crystalline peak corresponding to the (100) plane observed in the XRD spectra suggests a preferential growth of wires along the [001] direction. The crystallite size and micro-strain effect were estimated by Williamson-Hall (WH) analysis. The average crystallite size and lattice strain extracted from WH plot were found to be ˜34 nm and 0.0044, respectively. Further, electrical properties of the arrays of nanowires were examined using a two-probe method. The current-voltage curve of the tellurium wires exhibits a non-linear behavior and a double diode-like characteristic, which signifies their novel applications in future nanodevices.

  8. Scattering from randomly oriented scatterers with strong permittivity fluctuations

    Science.gov (United States)

    Yueh, S. H.; Kong, J. A.; Shin, R. T.

    1990-01-01

    Strong permittivity fluctuation theory is used to solve the problem of scattering from a medium composed of completely randomly oriented scatterers under a low frequency limit. Gaussian statistics are not assumed for the renormalized scattering sources. Numerical results on effective permittivity are illustrated for oblate and prolate spheroidal scatterers and compared with the results for spherical scatterers. The results are consistent with discrete scatterer theory. The effective permittivity of a random medium embedded with nonspherical scatterers shows a higher imaginary part than the spherical scatterer case with equal correlation volume. Under the distorted Born approximation, the polarimetric covariance matrix for the backscattered electric field is calculated for half-space randomly oriented scatterers. The nonspherical geometry of the scatterers shows significant effects on the cross-polarized backscattering returns, and the correlation coefficient between HH and VV returns. The polarimetric backscattering coefficients can provide useful information in distinguishing the geometry of scatterers.

  9. Enhancing formation rate of highly-oriented silicon nanowire arrays with the assistance of back substrates.

    Science.gov (United States)

    Chen, Chia-Yun; Wei, Ta-Cheng; Lin, Cheng-Ting; Li, Jheng-Yi

    2017-06-09

    Facile, effective and reliable etching technique for the formation of uniform silicon (Si) nanowire arrays were realized through the incorporation of back substrates with metal-assisted chemical etching (MaCE). In comparison with conventional MaCE process, a dramatic increase of etching rates upon MaCE process could be found by employing the conductive back substrates on p-type Si, while additionally prevented the creation of nanopores from catalytic etching reaction. Examinations on the involving etching kinetics, morphologies, wetting behaviors and surface structures were performed that validated the role of back substrates upon MaCE process. It was found that the involved two pathways for the extraction of electrons within Si favored the localized oxidation of Si at Si/Ag interfaces, thereby increasing the etching rate of MaCE process. This back-substrate involved MaCE could potentially meet the practical needs for the high-yield formation of Si nanowire arrays.

  10. Decrease in thermal conductivity in polymeric P3HT nanowires by size-reduction induced by crystal orientation: new approaches towards thermal transport engineering of organic materials.

    Science.gov (United States)

    Rojo, Miguel Muñoz; Martín, Jaime; Grauby, Stéphane; Borca-Tasciuc, Theodorian; Dilhaire, Stefan; Martin-Gonzalez, Marisol

    2014-07-21

    To date, there is no experimental characterization of thermal conductivity of semiconductor polymeric individual nanowires embedded in a matrix. This work reports on scanning thermal microscopy measurements in a 3ω configuration to determine how the thermal conductivity of individual nanowires made of a model conjugated polymer (P3HT) is modified when decreasing their diameters. We observe a reduction of thermal conductivity, from λNW = 2.29 ± 0.15 W K(-1) m(-1) to λNW = 0.5 ± 0.24 W K(-1) m(-1), when the diameter of nanowires is reduced from 350 nm to 120 nm, which correlates with the polymer crystal orientation measured by WAXS. Through this work, the foundations for future polymer thermal transport engineering are presented.

  11. Self-assembly and horizontal orientation growth of VO2 nanowires.

    Science.gov (United States)

    Cheng, Chun; Guo, Hua; Amini, Abbas; Liu, Kai; Fu, Deyi; Zou, Jian; Song, Haisheng

    2014-06-26

    Single-crystalline vanadium dioxide (VO2) nanostructures have attracted an intense research interest recently because of their unique single-domain metal-insulator phase transition property. Synthesis of these nanostructures in the past was limited in density, alignment, or single-crystallinity. The assembly of VO2 nanowires (NWs) is desirable for a "bottom-up" approach to the engineering of intricate structures using nanoscale building blocks. Here, we report the successful synthesis of horizontally aligned VO2 NWs with a dense growth mode in the [1-100]quartz direction of a polished x-cut quartz surface using a simple vapor transport method. Our strategy of controlled growth of VO2 NWs promisingly paves the way for designing novel metal-insulator transition devices based on VO2 NWs.

  12. Failure process in heterogeneous materials with randomly oriented fibers

    Science.gov (United States)

    Sbiaai, H.; Hader, A.; Bakir, R.; Achik, I.; Tarras, I.; Boughaleb, Y.

    2017-06-01

    Our aim in this study is to investigate the failure process in heterogeneous materials with randomly oriented fibers. In our proposed system, the fiber bundle model assumes that all the fibers are randomly oriented in all directions relative to the vertical one. Our calculations are performed in the framework of the local load-sharing rule, which states that the applied load of a broken fiber is redistributed only to its neighboring ones. The results show that this system presents a greater resistance than the classical one where the fibers are arranged parallel to the applied load. We found that the density of the broken fibers exhibited a power law and was linearly correlated with the applied load and temperature. However, the results show that the failure process of the considered system is characterized by an avalanche phenomenon with two different regimes. We also studied the crossover behavior of lifetime of the materials versus both applied load and temperature. We compared these results with those obtained from the classical model.

  13. The effects of random field at surface on the magnetic properties in the Ising nanotube and nanowire

    Science.gov (United States)

    Kaneyoshi, T.

    2016-12-01

    The phase diagrams and temperature dependences of total magnetization mT in two nanosystems (nanotube and nanowire) with a random magnetic field at the surface shell are studied by the uses of the effective-field theory with correlations. Some characteristic phenomena (reentrant phenomena and unconventional thermal variation of total magnetization) are found in the two systems. They are rather different between the two systems, which mainly come from the structural differences of the cores

  14. Platinum-Based Nanowires as Active Catalysts toward Oxygen Reduction Reaction: In Situ Observation of Surface-Diffusion-Assisted, Solid-State Oriented Attachment.

    Science.gov (United States)

    Ma, Yanling; Gao, Wenpei; Shan, Hao; Chen, Wenlong; Shang, Wen; Tao, Peng; Song, Chengyi; Addiego, Chris; Deng, Tao; Pan, Xiaoqing; Wu, Jianbo

    2017-12-01

    Facile fabrication of advanced catalysts toward oxygen reduction reaction with improving activity and stability is significant for proton-exchange membrane fuel cells. Based on a generic solid-state reaction, this study reports a modified hydrogen-assisted, gas-phase synthesis for facile, scalable production of surfactant-free, thin, platinum-based nanowire-network electrocatalysts. The free-standing platinum and platinum-nickel alloy nanowires show improvements of up to 5.1 times and 10.9 times for mass activity with a minimum 2.6% loss after an accelerated durability test for 10k cycles; 8.5 times and 13.8 times for specific activity, respectively, compared to commercial Pt/C catalyst. In addition, combined with a wet impregnation method, different substrate-materials-supported platinum-based nanowires are obtained, which paves the way to practical application as a next-generation supported catalyst to replace Pt/C. The growth stages and formation mechanism are investigated by an in situ transmission electron microscopy study. It reveals that the free-standing platinum nanowires form in the solid state via metal-surface-diffusion-assisted oriented attachment of individual nanoparticles, and the interaction with gas molecules plays a critical role, which may represent a gas-molecular-adsorbate-modified growth in catalyst preparation. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Controlled growth of vertically aligned ZnO nanowires with different crystal orientation of the ZnO seed layer

    Science.gov (United States)

    Cha, S. N.; Song, B. G.; Jang, J. E.; Jung, J. E.; Han, I. T.; Ha, J. H.; Hong, J. P.; Kang, D. J.; Kim, J. M.

    2008-06-01

    A novel synthesis and growth method achieving vertically aligned zinc oxide (ZnO) nanowires on a silicon dioxide (SiO2) coated silicon (Si) substrate is demonstrated. The growth direction of the ZnO nanowires is determined by the crystal structure of the ZnO seed layer, which is formed by the oxidation of a DC-sputtered Zn film. The [002] crystal direction of the seed layer is dominant under optimized thickness of the Zn film and thermal treatment. Vertically aligned ZnO nanowires on SiO2 coated Si substrate are realized from the appropriately thick oxidized Zn seed layer by a vapor-solid growth mechanism by catalyst-free thermal chemical vapor deposition (CVD). These experimental results raise the possibility of using the nanowires as functional blocks for high-density integration systems and/or photonic applications.

  16. From precursor powders to CsPbX{sub 3} perovskite nanowires. One-pot synthesis, growth mechanism, and oriented self-assembly

    Energy Technology Data Exchange (ETDEWEB)

    Tong, Yu; Bohn, Bernhard J.; Urban, Alexander S.; Polavarapu, Lakshminarayana; Feldmann, Jochen [Chair for Photonics and Optoelectronics, Department of Physics and Center for NanoScience (CeNS), Muenchen Univ. (Germany); Nanosystems Initiative Munich (NIM), Munich (Germany); Bladt, Eva; Bals, Sara [EMAT, University of Antwerp (Belgium); Wang, Kun; Mueller-Buschbaum, Peter [Department of Physics, Chair for Functional Materials, Technische Univ. Muenchen (Germany)

    2017-10-23

    The colloidal synthesis and assembly of semiconductor nanowires continues to attract a great deal of interest. Herein, we describe the single-step ligand-mediated synthesis of single-crystalline CsPbBr{sub 3} perovskite nanowires (NWs) directly from the precursor powders. Studies of the reaction process and the morphological evolution revealed that the initially formed CsPbBr{sub 3} nanocubes are transformed into NWs through an oriented-attachment mechanism. The optical properties of the NWs can be tuned across the entire visible range by varying the halide (Cl, Br, and I) composition through subsequent halide ion exchange. Single-particle studies showed that these NWs exhibit strongly polarized emission with a polarization anisotropy of 0.36. More importantly, the NWs can self-assemble in a quasi-oriented fashion at an air/liquid interface. This process should also be easily applicable to perovskite nanocrystals of different morphologies for their integration into nanoscale optoelectronic devices. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

  17. Study of Cs adsorption on (100) surface of [001]-oriented GaN nanowires: A first principle research

    Energy Technology Data Exchange (ETDEWEB)

    Xia, Sihao [Department of Optoelectronic Technology, School of Electronic and Optical Engineering, Nanjing University of Science and Technology Nanjing, 210094 (China); Liu, Lei, E-mail: liu1133_cn@sina.com.cn [Department of Optoelectronic Technology, School of Electronic and Optical Engineering, Nanjing University of Science and Technology Nanjing, 210094 (China); Kong, Yike [Department of Optoelectronic Technology, School of Electronic and Optical Engineering, Nanjing University of Science and Technology Nanjing, 210094 (China); Wang, Honggang; Wang, Meishan [School of Information and Electrical Engineering, Ludong University, Yantai 264025 (China)

    2016-11-30

    Highlights: • B{sub N} is the most stable adsorption site. • Work function is reduced after Cs adsorption. • Surface atomic structures are reconstructed. • Surface states near fermi level is contributed to the hybridization of Cs 5s state with Ga 4p and N 2p state. • NEA surface is demonstrated after Cs adsorption on GaN nanowire surface. - Abstract: Based on first-principle study, the adsorption mechanism of Cs on (100) crystal plane of GaN nanowire surface with coverage of 1/12 monolayer is explored. It is discovered that the most stable adsorption site is B{sub N} because of its lowest adsorption energy. The work function of GaN nanowire surface is reduced by 1.69 eV and will be further reduced with increasing Cs adsorption, which promotes the development of negative electron affinity (NEA) state of the materials. Furthermore, Cs adatom will make a great influence on the surface atomic structure, oppositely, little influence on the center atomic structure. There appears a dipole moment valued −6.93 Debye on the nanowire surface contributed to the formation the heterojunction on the surface, which is beneficial to the photoelectrons liberation. After Cs adsorption, the valence band and conduction band both move to lower energy side. The surface states mainly result from the hybridization of Cs 5s state with Ga 4p state and N 2p state. This study can help us to further experiment on the Cs adsorption processing on GaN nanowire and improve the photoemission performance of GaN nanowire devices.

  18. Urchin-like artificial gallium oxide nanowires grown by a novel MOCVD/CVD-based route for random laser application

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Ronaldo P. de [Programa de Pós-Graduação em Ciências de Materiais, Universidade Federal de Pernambuco, Recife (Brazil); Colégio Militar do Recife, Exército Brasileiro, Recife PE 50730-120 (Brazil); Oliveira, Nathalia Talita C. [Programa de Pós-Graduação em Ciências de Materiais, Universidade Federal de Pernambuco, Recife (Brazil); Dominguez, Christian Tolentino; Gomes, Anderson S. L.; Araújo, Cid B. de [Departamento de Física, Universidade Federal de Pernambuco, 50670-901 Recife (Brazil); Falcão, Eduardo H. L.; Alves, Severino; Luz, Leonis L. da [Departamento de Química Fundamental, Universidade Federal de Pernambuco, 50670-901 Recife (Brazil); Chassagnon, Remi [Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 6303 CNRS-Université de Bourgogne, 9 Av. A. Savary, BP 47870, 21078 Dijon Cedex (France); Sacilotti, Marco [Departamento de Física, Universidade Federal de Pernambuco, 50670-901 Recife (Brazil); Nanoform Group, Laboratoire Interdisciplinaire Carnot de Bourgogne, Université de Bourgogne, Dijon (France)

    2016-04-28

    A novel procedure based on a two-step method was developed to obtain β-Ga{sub 2}O{sub 3} nanowires by the chemical vapor deposition (CVD) method. The first step consists in the gallium micro-spheres growth inside a metal-organic chemical vapor deposition environment, using an organometallic precursor. Nanoscale spheres covering the microspheres were obtained. The second step involves the CVD oxidization of the gallium micro-spheres, which allow the formation of β-Ga{sub 2}O{sub 3} nanowires on the micro-sphere surface, with the final result being a nanostructure mimicking nature's sea urchin morphology. The grown nanomaterial is characterized by several techniques, including X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray, transmission electron microscopy, and photoluminescence. A discussion about the growth mechanism and the optical properties of the β-Ga{sub 2}O{sub 3} material is presented considering its unknown true bandgap value (extending from 4.4 to 5.68 eV). As an application, the scattering properties of the nanomaterial are exploited to demonstrate random laser emission (around 570 nm) when it is permeated with a laser dye liquid solution.

  19. Urchin-like artificial gallium oxide nanowires grown by a novel MOCVD/CVD-based route for random laser application

    Science.gov (United States)

    de Melo, Ronaldo P.; Oliveira, Nathalia Talita C.; Dominguez, Christian Tolentino; Gomes, Anderson S. L.; Falcão, Eduardo H. L.; Alves, Severino; da Luz, Leonis L.; Chassagnon, Remi; de Araújo, Cid B.; Sacilotti, Marco

    2016-04-01

    A novel procedure based on a two-step method was developed to obtain β-Ga2O3 nanowires by the chemical vapor deposition (CVD) method. The first step consists in the gallium micro-spheres growth inside a metal-organic chemical vapor deposition environment, using an organometallic precursor. Nanoscale spheres covering the microspheres were obtained. The second step involves the CVD oxidization of the gallium micro-spheres, which allow the formation of β-Ga2O3 nanowires on the micro-sphere surface, with the final result being a nanostructure mimicking nature's sea urchin morphology. The grown nanomaterial is characterized by several techniques, including X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray, transmission electron microscopy, and photoluminescence. A discussion about the growth mechanism and the optical properties of the β-Ga2O3 material is presented considering its unknown true bandgap value (extending from 4.4 to 5.68 eV). As an application, the scattering properties of the nanomaterial are exploited to demonstrate random laser emission (around 570 nm) when it is permeated with a laser dye liquid solution.

  20. Robotic virtual reality simulation plus standard robotic orientation versus standard robotic orientation alone: a randomized controlled trial.

    Science.gov (United States)

    Vaccaro, Christine M; Crisp, Catrina C; Fellner, Angela N; Jackson, Christopher; Kleeman, Steven D; Pavelka, James

    2013-01-01

    The objective of this study was to compare the effect of virtual reality simulation training plus robotic orientation versus robotic orientation alone on performance of surgical tasks using an inanimate model. Surgical resident physicians were enrolled in this assessor-blinded randomized controlled trial. Residents were randomized to receive either (1) robotic virtual reality simulation training plus standard robotic orientation or (2) standard robotic orientation alone. Performance of surgical tasks was assessed at baseline and after the intervention. Nine of 33 modules from the da Vinci Skills Simulator were chosen. Experts in robotic surgery evaluated each resident's videotaped performance of the inanimate model using the Global Rating Scale (GRS) and Objective Structured Assessment of Technical Skills-modified for robotic-assisted surgery (rOSATS). Nine resident physicians were enrolled in the simulation group and 9 in the control group. As a whole, participants improved their total time, time to incision, and suture time from baseline to repeat testing on the inanimate model (P = 0.001, 0.003, virtual reality simulation improve surgical skills on an inanimate model, although this may be a function of the initial "practice" on the inanimate model and repeat testing of a known task. However, robotic virtual reality simulation training increases GRS pass rates consistent with improved robotic technical skills learned in a virtual reality environment.

  1. Atomistic theory of excitonic fine structure in InAs/InP nanowire quantum dot molecules

    Science.gov (United States)

    Świderski, M.; Zieliński, M.

    2017-03-01

    Nanowire quantum dots have peculiar electronic and optical properties. In this work we use atomistic tight binding to study excitonic spectra of artificial molecules formed by a double nanowire quantum dot. We demonstrate a key role of atomistic symmetry and nanowire substrate orientation rather than cylindrical shape symmetry of a nanowire and a molecule. In particular for [001 ] nanowire orientation we observe a nonvanishing bright exciton splitting for a quasimolecule formed by two cylindrical quantum dots of different heights. This effect is due to interdot coupling that effectively reduces the overall symmetry, whereas single uncoupled [001 ] quantum dots have zero fine structure splitting. We found that the same double quantum dot system grown on [111 ] nanowire reveals no excitonic fine structure for all considered quantum dot distances and individual quantum dot heights. Further we demonstrate a pronounced, by several orders of magnitude, increase of the dark exciton optical activity in a quantum dot molecule as compared to a single quantum dot. For [111 ] systems we also show spontaneous localization of single particle states in one of nominally identical quantum dots forming a molecule, which is mediated by strain and origins from the lack of the vertical inversion symmetry in [111 ] nanostructures of overall C3 v symmetry. Finally, we study lowering of symmetry due to alloy randomness that triggers nonzero excitonic fine structure and the dark exciton optical activity in realistic nanowire quantum dot molecules of intermixed composition.

  2. The effect of nanowire length and diameter on the properties of transparent, conducting nanowire films

    Science.gov (United States)

    Bergin, Stephen M.; Chen, Yu-Hui; Rathmell, Aaron R.; Charbonneau, Patrick; Li, Zhi-Yuan; Wiley, Benjamin J.

    2012-03-01

    This article describes how the dimensions of nanowires affect the transmittance and sheet resistance of a random nanowire network. Silver nanowires with independently controlled lengths and diameters were synthesized with a gram-scale polyol synthesis by controlling the reaction temperature and time. Characterization of films composed of nanowires of different lengths but the same diameter enabled the quantification of the effect of length on the conductance and transmittance of silver nanowire films. Finite-difference time-domain calculations were used to determine the effect of nanowire diameter, overlap, and hole size on the transmittance of a nanowire network. For individual nanowires with diameters greater than 50 nm, increasing diameter increases the electrical conductance to optical extinction ratio, but the opposite is true for nanowires with diameters less than this size. Calculations and experimental data show that for a random network of nanowires, decreasing nanowire diameter increases the number density of nanowires at a given transmittance, leading to improved connectivity and conductivity at high transmittance (>90%). This information will facilitate the design of transparent, conducting nanowire films for flexible displays, organic light emitting diodes and thin-film solar cells.This article describes how the dimensions of nanowires affect the transmittance and sheet resistance of a random nanowire network. Silver nanowires with independently controlled lengths and diameters were synthesized with a gram-scale polyol synthesis by controlling the reaction temperature and time. Characterization of films composed of nanowires of different lengths but the same diameter enabled the quantification of the effect of length on the conductance and transmittance of silver nanowire films. Finite-difference time-domain calculations were used to determine the effect of nanowire diameter, overlap, and hole size on the transmittance of a nanowire network. For

  3. Complementary Metal Oxide Semiconductor-Compatible, High-Mobility, ⟨111⟩-Oriented GaSb Nanowires Enabled by Vapor-Solid-Solid Chemical Vapor Deposition.

    Science.gov (United States)

    Yang, Zai-Xing; Liu, Lizhe; Yip, SenPo; Li, Dapan; Shen, Lifan; Zhou, Ziyao; Han, Ning; Hung, Tak Fu; Pun, Edwin Yue-Bun; Wu, Xinglong; Song, Aimin; Ho, Johnny C

    2017-04-25

    Using CMOS-compatible Pd catalysts, we demonstrated the formation of high-mobility ⟨111⟩-oriented GaSb nanowires (NWs) via vapor-solid-solid (VSS) growth by surfactant-assisted chemical vapor deposition through a complementary experimental and theoretical approach. In contrast to NWs formed by the conventional vapor-liquid-solid (VLS) mechanism, cylindrical-shaped Pd5Ga4 catalytic seeds were present in our Pd-catalyzed VSS-NWs. As solid catalysts, stoichiometric Pd5Ga4 was found to have the lowest crystal surface energy and thus giving rise to a minimal surface diffusion as well as an optimal in-plane interface orientation at the seed/NW interface for efficient epitaxial NW nucleation. These VSS characteristics led to the growth of slender NWs with diameters down to 26.9 ± 3.5 nm. Over 95% high crystalline quality NWs were grown in ⟨111⟩ orientation for a wide diameter range of between 10 and 70 nm. Back-gated field-effect transistors (FETs) fabricated using the Pd-catalyzed GaSb NWs exhibit a superior peak hole mobility of ∼330 cm2 V-1 s-1, close to the mobility limit for a NW channel diameter of ∼30 nm with a free carrier concentration of ∼1018 cm-3. This suggests that the NWs have excellent homogeneity in phase purity, growth orientation, surface morphology and electrical characteristics. Contact printing process was also used to fabricate large-scale assembly of Pd-catalyzed GaSb NW parallel arrays, confirming the potential constructions and applications of these high-performance electronic devices.

  4. Magnetic field alignment of randomly oriented, high aspect ratio silicon microwires into vertically oriented arrays.

    Science.gov (United States)

    Beardslee, Joseph A; Sadtler, Bryce; Lewis, Nathan S

    2012-11-27

    External magnetic fields have been used to vertically align ensembles of silicon microwires coated with ferromagnetic nickel films. X-ray diffraction and image analysis techniques were used to quantify the degree of vertical orientation of the microwires. The degree of vertical alignment and the minimum field strength required for alignment were evaluated as a function of the wire length, coating thickness, magnetic history, and substrate surface properties. Nearly 100% of 100 μm long, 2 μm diameter, Si microwires that had been coated with 300 nm of Ni could be vertically aligned by a 300 G magnetic field. For wires ranging from 40 to 60 μm in length, as the length of the wire increased, a higher degree of alignment was observed at lower field strengths, consistent with an increase in the available magnetic torque. Microwires that had been exposed to a magnetic sweep up to 300 G remained magnetized and, therefore, aligned more readily during subsequent magnetic field alignment sweeps. Alignment of the Ni-coated Si microwires occurred at lower field strengths on hydrophilic Si substrates than on hydrophobic Si substrates. The magnetic field alignment approach provides a pathway for the directed assembly of solution-grown semiconductor wires into vertical arrays, with potential applications in solar cells as well as in other electronic devices that utilize nano- and microscale components as active elements.

  5. Direct monolithic integration of vertical single crystalline octahedral molecular sieve nanowires on silicon

    Energy Technology Data Exchange (ETDEWEB)

    Carretero-Genevrier, Adrian [Institut des Nanotechnologies de Lyon (INL), UMR-CNRS 5270, Ecole Central de Lyon, Ecully (France); Institut de Ciencia de Materials de Barcelona ICMAB, Catalonia (Spain); Sorbonne Univ., UPMC Univ. Paris 06, CNRS, College de France, Paris (France); Oro-Sole, Judith [Institut de Ciencia de Materials de Barcelona ICMAB, Catalonia (Spain); Gazquez, Jaume [Institut de Ciencia de Materials de Barcelona ICMAB, Catalonia (Spain); Magen, Cesar [Univ. de Zaragoza, Zaragoza (Spain); Miranda, Laura [Sorbonne Univ., UPMC Univ. Paris 06, CNRS, College de France, Paris (France); Puig, Teresa [Institut de Ciencia de Materials de Barcelona ICMAB, Catalonia (Spain); Obradors, Xavier [Institut de Ciencia de Materials de Barcelona ICMAB, Catalonia (Spain); Ferain, Etienne [Univ. Catholique de Louvain, Louvain-la-Neuve (Belgium); Sanchez, Clement [Sorbonne Univ., UPMC Univ. Paris 06, CNRS, College de France, Paris (France); Rodriguez-Carvajal, Juan [Institut Laue-Langevin, Grenoble Cedex (France); Mestres, Narcis [Institut de Ciencia de Materials de Barcelona ICMAB, Catalonia (Spain)

    2013-12-13

    We developed an original strategy to produce vertical epitaxial single crystalline manganese oxide octahedral molecular sieve (OMS) nanowires with tunable pore sizes and compositions on silicon substrates by using a chemical solution deposition approach. The nanowire growth mechanism involves the use of track-etched nanoporous polymer templates combined with the controlled growth of quartz thin films at the silicon surface, which allowed OMS nanowires to stabilize and crystallize. α-quartz thin films were obtained after thermal activated crystallization of the native amorphous silica surface layer assisted by Sr2+- or Ba2+-mediated heterogeneous catalysis in the air at 800 °C. These α-quartz thin films work as a selective template for the epitaxial growth of randomly oriented vertical OMS nanowires. Furthermore, the combination of soft chemistry and epitaxial growth opens new opportunities for the effective integration of novel technological functional tunneled complex oxides nanomaterials on Si substrates.

  6. Single-Crystalline Gold Nanowires Synthesized from Light-Driven Oriented Attachment and Plasmon-Mediated Self-Assembly of Gold Nanorods or Nanoparticles

    Science.gov (United States)

    Yu, Shang-Yang; Gunawan, Hariyanto; Tsai, Shiao-Wen; Chen, Yun-Ju; Yen, Tzu-Chen; Liaw, Jiunn-Woei

    2017-03-01

    Through the light-driven geometrically oriented attachment (OA) and self-assembly of Au nanorods (NRs) or nanoparticles (NPs), single-crystalline Au nanowires (NWs) were synthesized by the irradiation of a linearly-polarized (LP) laser. The process was conducted in a droplet of Au colloid on a glass irradiated by LP near-infrared (e.g. 1064 nm and 785 nm) laser beam of low power at room temperature and atmospheric pressure, without any additive. The FE-SEM images show that the cross sections of NWs are various: tetragonal, pentagonal or hexagonal. The EDS spectrum verifies the composition is Au, and the pattern of X-ray diffraction identifies the crystallinity of NWs with the facets of {111}, {200}, {220} and {311}. We proposed a hypothesis for the mechanism that the primary building units are aligned and coalesced by the plasmon-mediated optical torque and force to form the secondary building units. Subsequently, the secondary building units undergo the next self-assembly, and so forth the tertiary ones. The LP light guides the translational and rotational motions of these building units to perform geometrically OA in the side-by-side, end-to-end and T-shaped manners. Consequently, micron-sized ordered mesocrystals are produced. Additionally, the concomitant plasmonic heating causes the annealing for recrystallizing the mesocrystals in water.

  7. Organic Nanowires

    DEFF Research Database (Denmark)

    Balzer, Frank; Schiek, Manuela; Al-Shamery, Katharina

    Single crystalline nanowires from fluorescing organic molecules like para-phenylenes or thiophenes are supposed to become key elements in future integrated optoelectronic devices [1]. For a sophisticated design of devices based on nanowires the basic principles of the nanowire formation have...

  8. Random nanowires of nickel doped TiO2 with high surface area and electron mobility for high efficiency dye-sensitized solar cells.

    Science.gov (United States)

    Archana, P S; Naveen Kumar, E; Vijila, C; Ramakrishna, S; Yusoff, M M; Jose, R

    2013-01-28

    Mesoporous TiO(2) with a large specific surface area (~150 m(2) g(-1)) is the most successful material in dye-sensitized solar cells so far; however, its inferior charge mobility is a major efficiency limiter. This paper demonstrates that random nanowires of Ni-doped TiO(2) (Ni:TiO(2)) have a dramatic influence on the particulate and charge transport properties. Nanowires (dia ~60 nm) of Ni:TiO(2) with a specific surface area of ~80 m(2) g(-1) were developed by an electrospinning technique. The band gap of the Ni:TiO(2) shifted to the visible region upon doping of 5 at% Ni atoms. The Mott-Schottky analysis shows that the flat band potential of Ni:TiO(2) shifts to a more negative value than the undoped samples. The electrochemical impedance spectroscopic measurements showed that the Ni:TiO(2) offer lower charge transport resistance, higher charge recombination resistance, and enhanced electron lifetime compared to the undoped samples. The dye-sensitized solar cells fabricated using the Ni:TiO(2) nanowires showed an enhanced photoconversion efficiency and short-circuit current density compared to the undoped analogue. The transient photocurrent measurements showed that the Ni:TiO(2) has improved charge mobility compared with TiO(2) and is several orders of magnitude higher compared to the P25 particles.

  9. Microwave single-scattering properties of randomly oriented soft-ice hydrometeors

    Directory of Open Access Journals (Sweden)

    D. Casella

    2008-11-01

    Full Text Available Large ice hydrometeors are usually present in intense convective clouds and may significantly affect the upwelling radiances that are measured by satellite-borne microwave radiometers – especially, at millimeter-wavelength frequencies. Thus, interpretation of these measurements (e.g., for precipitation retrieval requires knowledge of the single scattering properties of ice particles. On the other hand, shape and internal structure of these particles (especially, the larger ones is very complex and variable, and therefore it is necessary to resort to simplifying assumptions in order to compute their single-scattering parameters.

    In this study, we use the discrete dipole approximation (DDA to compute the absorption and scattering efficiencies and the asymmetry factor of two kinds of quasi-spherical and non-homogeneous soft-ice particles in the frequency range 50–183 GHz. Particles of the first kind are modeled as quasi-spherical ice particles having randomly distributed spherical air inclusions. Particles of the second kind are modeled as random aggregates of ice spheres having random radii. In both cases, particle densities and dimensions are coherent with the snow hydrometeor category that is utilized by the University of Wisconsin – Non-hydrostatic Modeling System (UW-NMS cloud-mesoscale model. Then, we compare our single-scattering results for randomly-oriented soft-ice hydrometeors with corresponding ones that make use of: a effective-medium equivalent spheres, b solid-ice equivalent spheres, and c randomly-oriented aggregates of ice cylinders. Finally, we extend to our particles the scattering formulas that have been developed by other authors for randomly-oriented aggregates of ice cylinders.

  10. Simulation of Young’s moduli for hexagonal ZnO [0 0 0 1]-oriented nanowires: first principles and molecular mechanical calculations

    Science.gov (United States)

    Bandura, Andrei V.; Evarestov, Robert A.; Lukyanov, Sergey I.; Piskunov, Sergei; Zhukovskii, Yuri F.

    2017-08-01

    Morphologically reproducible wurtzite-structured zinc oxide nanowires (ZnO NWs) can be synthesized by different methods. Since ZnO NWs have been found to possess piezoelectricity, a comprehensive study of their mechanical properties, e.g. deformations caused by external compression or stretching, is one of the actual tasks of this paper. We have calculated wurtzite-structured [0 0 0 1]-oriented ZnO NWs whose diameters have been varied within 1-5 nm and 1-20 nm ranges when using either ab initio (hybrid DFT-LCAO) or force-field (molecular mechanical) methods, respectively (the minimum diameter d NW of experimentally synthesized NWs has been estimated on average to be ~20 nm). When using both chosen calculation approaches, the values of Young’s moduli determined for the mentioned ranges of NW diameters have been found to be qualitatively compatible (168-169 GPa for 5 nm NW thickness), whereas results of molecular mechanical simulations on Y NW for 20 nm-thick NWs (160-162 GPa) have been qualitatively comparable with those experimentally measured along the [0 0 0 1] direction of NW loading. In all the cases, a gradual increase of the NW diameter has resulted in an asymptotic decrease of Young’s modulus consequently approaching that (Y b) of wurtzite-structured ZnO bulk along its [0 0 0 1] axis. The novelty of this study is that we combine the computation methods of quantum chemistry and molecular mechanics, while the majority of previous studies with the same aim have focused on the application of different classical molecular dynamical methods.

  11. Nanoscale manipulation of Ge nanowires by ion hammering

    Energy Technology Data Exchange (ETDEWEB)

    Picraux, Samuel T [Los Alamos National Laboratory; Romano, Lucia [UNIV OF FLORIDA; Rudawski, Nicholas G [UNIV OF FLORIDA; Holzworth, Monta R [UNIV OF FLORIDA; Jones, Kevin S [UNIV OF FLORIDA; Choi, S G [NREL

    2009-01-01

    Nanowires generated considerable interest as nanoscale interconnects and as active components of both electronic and electromechanical devices. However, in many cases, manipulation and modification of nanowires are required to realize their full potential. It is essential, for instance, to control the orientation and positioning of nanowires in some specific applications. This work demonstrates a simple method to reversibly control the shape and the orientation of Ge nanowires by using ion beams. Initially, crystalline nanowires were partially amorphized by 30 keY Ga+-implantation. After amorphization, viscous flow and plastic deformation occurred due to the ion hammering effect, causing the nanowires to bend toward the beam direction. The bending was reversed multiple times by ion-implanting the opposite side of the nanowires, resulting in straightening of the nanowires and subsequent bending in the opposite direction. This ion hammering effect demonstrates the detailed manipulation of nanoscale structures is possible through the use of ion irradiation.

  12. Cellular compatibility of RGD-modified chitosan nanofibers with aligned or random orientation

    Energy Technology Data Exchange (ETDEWEB)

    Wang Yanyan; Lue Lanxin; Feng Zhangqi; Xiao Zhongdang; Huang Ningping, E-mail: nphuang@seu.edu.c, E-mail: zdxiao@seu.edu.c [State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096 (China)

    2010-10-01

    Aligned and randomly oriented chitosan nanofibers were prepared by electrospinning. The fibers were modified with the RGD cell-adhesive peptide through a heterobifunctional crosslinker containing a segment of poly(ethylene glycol) (PEG). PEG rendered the surface hydrophilic and provided flexible spacers, allowing the preservation of the bioactivity of further captured RGD peptides. NIH 3T3 cells were used to test the cellular compatibility of these chitosan nanofibrous scaffolds. Cell morphology and viability were investigated by SEM, fluorescent staining and cell counting. The results indicate that RGD-modified surfaces significantly improve the cellular compatibility of chitosan nanofibers and suggest a good candidate as a scaffold employed in tissue engineering.

  13. Magnetostatic Interaction in Fe-Co Nanowires

    Directory of Open Access Journals (Sweden)

    Laura Elbaile

    2012-01-01

    Full Text Available Arrays of Fe-Co alloy nanowires with diameter around 35 nm and several micrometers in length have been synthesized by codepositing Fe and Co into porous anodic alumina. The morphology, structure, and magnetic properties of the nanowires (hysteresis loops and remanence curves were characterized by SEM, TEM, X-ray diffraction (XRD, and VSM, respectively. The XRD patterns indicate that the Fe-Co nanowires present a body-centered cubic (bcc structure and a preferred (110 orientation perpendicular to the template surface. From the hysteresis loops obtained with the magnetic field applied in the axis direction of the nanowires, we can observe that the coercive field slightly decreases when the nanowire length increases. This magnetic behaviour is analyzed considering the shape anisotropy and the dipolar interactions among nanowires.

  14. Public attitudes toward child undervaccination: A randomized experiment on evaluations, stigmatizing orientations, and support for policies.

    Science.gov (United States)

    Carpiano, Richard M; Fitz, Nicholas S

    2017-07-01

    Child undervaccination is a complex public health problem and a contentious social and political issue. Efforts to increase vaccination coverage require understanding how the public evaluates different reasons for child undervaccination, which may influence attitudes, stigmatizing behaviors, and support for vaccination policies. We conducted a vignette experiment with a United States national online sample (n = 1469) to investigate how and why different undervaccination actions shape evaluations (blame, anger, sympathy, differentness, credibility, dangerousness), stigmatizing orientations (social distance, discrimination), and support for particular policies (e.g., research funding, belief exemptions, fines). Each participant was randomly assigned to read one of four vignettes that described a mother who either refused vaccines, delayed vaccines, encountered social barriers to obtaining vaccines, or was up-to-date on vaccines for her child. Compared to the up-to-date condition, each undervaccination action predicted significantly more negative evaluations and stigmatizing orientations. Vaccine refusal was the most negatively appraised. Differences in social distance and discrimination were explained by negative evaluations about the parent. These evaluations and orientations predicted support for a range of policies. Negative parental evaluations were associated with increased support for more severe policies. We discuss the implications of these findings for addressing undervaccination and informing health scholarship on stigma. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Vibration Analysis of Randomly Oriented Carbon Nanotube Based on FGM Beam Using Timoshenko Theory

    Directory of Open Access Journals (Sweden)

    Mohammad Amin Rashidifar

    2015-02-01

    Full Text Available The carbon nanotube (CNT reinforced functionally graded materials (FGM are expected to be the new generation materials having wide range of unexplored potential applications in various technological areas such as aerospace and structural and chemical industry. The present work deals with the finite element modeling and free vibration analysis of CNT based functionally graded beam using three-dimensional Timoshenko beam theory. It has been assumed that the material properties of CNT based FG beam vary only along the thickness and these properties are evaluated by rule of mixture. The extended Hamilton principle has been applied to find out the governing equations of CNT based FG beam. Finite element method is used to solve governing equation with the exact shape functions. Initial analysis deals with CNTs assumed to be oriented along the length direction only. But practically it is not possible. So, further work deals with the free vibration analysis of functionally graded nanocomposite beams reinforced by randomly oriented straight single walled carbon nanotubes (SWCNTs. The Eshelby-Mori-Tanaka approach based on an equivalent fiber is used to investigate the material properties of the beam. Results are presented in tabular and graphical forms to show the effects of carbon nanotube orientations, slenderness ratios, and boundary conditions on the dynamic behavior of the beam.

  16. Real-Space x-ray tomographic reconstruction of randomly oriented objects with sparse data frames.

    Science.gov (United States)

    Ayyer, Kartik; Philipp, Hugh T; Tate, Mark W; Elser, Veit; Gruner, Sol M

    2014-02-10

    Schemes for X-ray imaging single protein molecules using new x-ray sources, like x-ray free electron lasers (XFELs), require processing many frames of data that are obtained by taking temporally short snapshots of identical molecules, each with a random and unknown orientation. Due to the small size of the molecules and short exposure times, average signal levels of much less than 1 photon/pixel/frame are expected, much too low to be processed using standard methods. One approach to process the data is to use statistical methods developed in the EMC algorithm (Loh & Elser, Phys. Rev. E, 2009) which processes the data set as a whole. In this paper we apply this method to a real-space tomographic reconstruction using sparse frames of data (below 10(-2) photons/pixel/frame) obtained by performing x-ray transmission measurements of a low-contrast, randomly-oriented object. This extends the work by Philipp et al. (Optics Express, 2012) to three dimensions and is one step closer to the single molecule reconstruction problem.

  17. Effect of NICU Department Orientation Program on Mother’s Anxiety: a Randomized Clinical Trial

    Directory of Open Access Journals (Sweden)

    Leila Valizadeh

    2016-09-01

    Full Text Available Introduction: Neonatal intensive care unit induces the high level of anxiety for mothers. The aim of this study was to evaluate the effectiveness of NICU orientation program on the anxiety of mothers who had preterm newborns hospitalized in NICU. Methods: This study was a randomized clinical trial (three parallel groups. Participants included 99 mothers with preterm newborns hospitalized in NICU of Al- Zahra hospital, affiliated to Tabriz University of Medical Sciences in 2015. Mothers were randomly assigned to one of three groups (film, booklet, and control. Mothers completed the State- Trait Anxiety Inventory before entering to the NICU, and then mothers in the experiment groups became familiar with the NICU environment through watching a film or reading booklet. After the first NICU visit, all mothers completed the STAI and Cattell's Anxiety Questionnaires. Data were analyzed using SPSS ver. 13 software. Results: There was no significant difference between three groups regarding state- trait anxiety before the intervention. After the first NICU visit, a significant reduction in maternal state anxiety was seen in the both experiment groups. There was no statistical significant difference regarding trait anxiety. Data obtained from Cattell's anxiety questionnaire after intervention, showed significant difference in state anxiety between groups. Conclusion: Employing film and booklet orientation strategy after preterm delivery can reduce the mother’s anxiety and beneficent for the mother, baby, family and health care system.

  18. Decrease in thermal conductivity in polymeric P3HT nanowires by size-reduction induced by crystal orientation: new approaches towards thermal transport engineering of organic materials

    OpenAIRE

    Rojo, Miguel Muñoz; Martín, Jaime; Grauby, Stéphane; Borca-Tasciuc, Theodorian; Dilhaire, Stefan; Martin-Gonzalez, Marisol

    2014-01-01

    International audience; To date, there is no experimental characterization of thermal conductivity of semiconductor polymeric individual nanowires embedded in a matrix. This work reports on scanning thermal microscopy measurements in a 3ω configuration to determine how the thermal conductivity of individual nanowires made of a model conjugated polymer (P3HT) is modified when decreasing their diameters. We observe a reduction of thermal conductivity, from λNW = 2.29 ± 0.15 W K−1 m−1 to λNW = 0...

  19. Guiding the orientation of smooth muscle cells on random and aligned polyurethane/collagen nanofibers.

    Science.gov (United States)

    Jia, Lin; Prabhakaran, Molamma P; Qin, Xiaohong; Ramakrishna, Seeram

    2014-09-01

    Fabricating scaffolds that can simulate the architecture and functionality of native extracellular matrix is a huge challenge in vascular tissue engineering. Various kinds of materials are engineered via nano-technological approaches to meet the current challenges in vascular tissue regeneration. During this study, nanofibers from pure polyurethane and hybrid polyurethane/collagen in two different morphologies (random and aligned) and in three different ratios of polyurethane:collagen (75:25; 50:50; 25:75) are fabricated by electrospinning. The fiber diameters of the nanofibrous scaffolds are in the range of 174-453 nm and 145-419 for random and aligned fibers, respectively, where they closely mimic the nanoscale dimensions of native extracellular matrix. The aligned polyurethane/collagen nanofibers expressed anisotropic wettability with mechanical properties which is suitable for regeneration of the artery. After 12 days of human aortic smooth muscle cells culture on different scaffolds, the proliferation of smooth muscle cells on hybrid polyurethane/collagen (3:1) nanofibers was 173% and 212% higher than on pure polyurethane scaffolds for random and aligned scaffolds, respectively. The results of cell morphology and protein staining showed that the aligned polyurethane/collagen (3:1) scaffold promote smooth muscle cells alignment through contact guidance, while the random polyurethane/collagen (3:1) also guided cell orientation most probably due to the inherent biochemical composition. Our studies demonstrate the potential of aligned and random polyurethane/collagen (3:1) as promising substrates for vascular tissue regeneration. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  20. Deducing fast electron density changes in randomly orientated uncrystallized biomolecules in a pump-probe experiment.

    Science.gov (United States)

    Pande, K; Schwander, P; Schmidt, M; Saldin, D K

    2014-07-17

    We propose a method for deducing time-resolved structural changes in uncrystallized biomolecules in solution. The method relies on measuring the angular correlations of the intensities, when averaged over a large number of diffraction patterns from randomly oriented biomolecules in solution in a liquid solvent. The experiment is somewhat like a pump-probe version of an experiment on small angle X-ray scattering, except that the data expected by the algorithm are not just the radial variation of the averaged intensities. The differences of these correlation functions as measured from a photoexcited and dark structure enable the direct calculation of the difference electron density with a knowledge of only the dark structure. We exploit a linear relation we derive between the difference in these correlation functions and the difference electron density, applicable for small structural changes.

  1. Nanowire Lasers

    Directory of Open Access Journals (Sweden)

    Couteau C.

    2015-05-01

    Full Text Available We review principles and trends in the use of semiconductor nanowires as gain media for stimulated emission and lasing. Semiconductor nanowires have recently been widely studied for use in integrated optoelectronic devices, such as light-emitting diodes (LEDs, solar cells, and transistors. Intensive research has also been conducted in the use of nanowires for subwavelength laser systems that take advantage of their quasione- dimensional (1D nature, flexibility in material choice and combination, and intrinsic optoelectronic properties. First, we provide an overview on using quasi-1D nanowire systems to realize subwavelength lasers with efficient, directional, and low-threshold emission. We then describe the state of the art for nanowire lasers in terms of materials, geometry, andwavelength tunability.Next,we present the basics of lasing in semiconductor nanowires, define the key parameters for stimulated emission, and introduce the properties of nanowires. We then review advanced nanowire laser designs from the literature. Finally, we present interesting perspectives for low-threshold nanoscale light sources and optical interconnects. We intend to illustrate the potential of nanolasers inmany applications, such as nanophotonic devices that integrate electronics and photonics for next-generation optoelectronic devices. For instance, these building blocks for nanoscale photonics can be used for data storage and biomedical applications when coupled to on-chip characterization tools. These nanoscale monochromatic laser light sources promise breakthroughs in nanophotonics, as they can operate at room temperature, can potentially be electrically driven, and can yield a better understanding of intrinsic nanomaterial properties and surface-state effects in lowdimensional semiconductor systems.

  2. Patient-oriented rehabilitation in the management of chronic mechanical neck pain: a randomized controlled trial.

    Science.gov (United States)

    Paoloni, M; Tavernese, E; Cacchio, A; Tattoli, M; Melis, L; Ronconi, R; Santilli, V

    2013-06-01

    Management of chronic mechanical neck pain (CMNP) still represents a challenge. A patient-oriented (Pa-O) therapeutic approach could be considered as the one in which therapies are scheduled at the start of each therapeutic session according to the patient's current physical status, and differs from a prescription-oriented (Pr-O) therapeutic approach, in which therapies are prescribed at the first medical referral and are not adjusted at any time during the treatment period. To determine if a Pa-O approach may be more beneficial for CMNP patients when compared to a Pr-O one. Randomized controlled trial. 220 CMNP outpatients randomized to either Pa-O group (N.=114) or Pr-O group (N.=106). Each group received 10 therapeutic sessions over 3 weeks. Primary outcome measures were pain assessment, evaluated by Visual-Analog-Scale (VAS), and disability level, evaluated by the Neck Pain and Disability Scale (NPDS-I). Secondary outcome measures included patients' response to treatment and treatment failures. Measurements were carried out at baseline (T0) and 1 month after treatment ended (T1). Data were analysed according to the intention-to-treat principle. Patients in both groups displayed at T1 a significant reduction in VAS and NPDS-I scores. The relative changes at T1 were greater in Pa-O group when compared with Pr-O group both for VAS (61.5% versus 48.8%; Pup in suffers from CMNP. However, the occurrence of a performance-bias due to the increased level of attention from physicians to patients in Pa-O group, cannot be ruled-out. A Pa-O approach should be considered for CMNP also in an outpatient facility.

  3. Effect of SiC Nano powder on Multiaxial Woven and Chopped Randomly Oriented Flax/Sisal Fiber Reinforced composites

    Directory of Open Access Journals (Sweden)

    Kalagi Ganesh R.

    2018-01-01

    Full Text Available A study has been carried out to investigate effect of SiC Nano powder on tensile and impact properties of Multiaxial layers of Flax and Sisal fiber reinforced composites and randomly oriented chopped Flax and Sisal fiber reinforced composites. It has been observed that tensile strength and impact strength were improved using 6% of SiC Nanopowder into Multiaxial layer (+45º/-45º, 0º/90º of Flax and Sisal where as randomly oriented chopped Flax and Sisal fiber reinforced composites are improved in its stiffnes for the same composition of fiber, epoxy and SiC Nano powder. SEM Analysis are done to analyse the distribution of SiC in both Multiaxial layers of Flax and Sisal fiber reinforced composites and randomly oriented chopped Flax and Sisal fiber reinforced composites.

  4. Semiconductor nanowires: Controlled growth and thermal properties

    Science.gov (United States)

    Wu, Yiying

    This dissertation presents an experimental study of the controlled growth of semiconductor nanowires and their thermophysical properties. The synthesis of nanowires was based on the well-known Vapor-Liquid-Solid (VLS) mechanism in which the growth of nanowire is initiated by a nanosized liquid droplet. The prepared nanowires are single-crystalline with certain preferred growth direction. Nanowires with different compositions have been synthesized, including Si, Ge, boron and MgB2. The control of nanowire composition, diameter and orientation has also been achieved. In addition, a Pulsed Laser Ablation-Chemical Vapor Deposition (PLA-CVD) hybrid process was developed to synthesize Si/SiGe longitudinally superlattice nanowires. The thermal conductivity of individual pure Si nanowire and Si/SiGe nanowire was measured using a microfabricated suspended device over a temperature range of 20--320 K. The thermal conductivities of individual 22, 37, 56, and 115 nm diameter single crystalline intrinsic Si nanowires were much lower than the bulk value due to the strong phonon boundary scattering. Except for the 22 nm diameter nanowire, theoretical predictions using a modified Callaway model fit the experimental data very well. The data for the 22 nm diameter wire suggest that changes in phonon dispersion due to confinement can cause additional thermal conductivity reduction. The Si/SiGe superlattice nanowires with diameters of 83 run and 58 nm were also measured. Their thermal conductivities are smaller than pure Si nanowire with similar diameter, as well as Si/SiGe superlattice thin film with comparable period. Both the alloying scattering and the boundary scattering are believed to contribute to this reduction. Size dependent melting-recrystallization study of the carbon-sheathed semiconductor Ge nanowires was carried out in in-situ high temperature transmission electron microscope (TEM). Significant depression in melting temperature with decreasing size of the nanowires as

  5. Synthesis and characterization of germanium nanowires and germanium/silicon radially heterostructured nanowires

    Science.gov (United States)

    Goldthorpe, Irene Anne

    Semiconductor nanowires offer new opportunities to study physical phenomena in low-dimensional nanostructures. They also possess technologically useful properties for applications in electronics, optics, sensing, and thermoelectrics. Germanium nanowires are of particular interest, because of germanium's compatibility with standard silicon integrated circuit fabrication processes, its high electronic carrier mobilities, and the low temperature required for germanium nanowire growth. In this work, epitaxially-aligned germanium nanowires are grown on silicon substrates by chemical vapor deposition through the vapor-liquid-solid mechanism. Uniform nanowire diameters between 5 and 50 nm are obtained through the use of monodisperse gold colloids as catalysts. The crystallographic orientation of the nanowires, their strain, and their heteroepitaxial relationship with the substrate are characterized with transmission electron microscopy (TEM) and x-ray diffraction (XRD). A process for removing the gold catalysts from the tips of the germanium nanowires is demonstrated. Silicon shells are then heteroepitaxially deposited around the wires to fabricate radial heterostructures. These shells passivate the germanium nanowire surface, create electronic band offsets to confine holes away the surface where they can scatter or recombine, and induce strain which could allow for the engineering of properties such as band gap and carrier mobilities. However, analogous to planar heteroepitaxy, surface roughening and misfit dislocations can relax this strain. The effects of coaxial dimensions on strain relaxation in these structures are analyzed quantitatively by TEM and synchrotron XRD, and these results are related to continuum elasticity models. Lessons learned generated two successful strategies for synthesizing coherent core-shell nanowires with large misfit strain: chlorine surface passivation and growth of nanowires with low-energy sidewall facets. Both approaches avoid the strain

  6. Magnetic hysteresis in small-grained Co{sub x}Pd{sub 1−x} nanowire arrays

    Energy Technology Data Exchange (ETDEWEB)

    Viqueira, M.S. [Facultad de Matemática, Astronomía y Física, Universidad Nacional de Córdoba. Ciudad Universitaria, 5000 Córdoba (Argentina); Instituto de Física Enrique Gaviola – CONICET (Argentina); Pozo-López, G. [Facultad de Matemática, Astronomía y Física, Universidad Nacional de Córdoba. Ciudad Universitaria, 5000 Córdoba (Argentina); Instituto de Física Enrique Gaviola – CONICET (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) (Argentina); Urreta, S.E., E-mail: urreta@famaf.unc.edu.ar [Facultad de Matemática, Astronomía y Física, Universidad Nacional de Córdoba. Ciudad Universitaria, 5000 Córdoba (Argentina); Condó, A.M. [Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) (Argentina); Centro Atómico Bariloche, Comisión Nacional de Energía Atómica – Instituto Balseiro, Universidad Nacional de Cuyo. Av. Bustillo 9500, 8400, San Carlos de Bariloche (Argentina); Cornejo, D.R. [Instituto de Física, Universidade de São Paulo, 05508-900 São Paulo, SP (Brazil); and others

    2015-11-15

    Co–Pd nanowires with small grain size are fabricated by AC electrodeposition into hexagonally ordered alumina pores, 20–35 nm in diameter and about 1 µm long. The effects of the alloy composition, the nanowire diameter and the grain size on the hysteresis properties are considered. X-ray diffraction indicates that the nanowires are single phase, a fcc Co–Pd solid solution; electron microscopy results show that they are polycrystalline, with randomly oriented grains (7–12 nm), smaller than the wire diameter. Nanowire arrays are ferromagnetic, with an easy magnetization axis parallel to the nanowire long axis. Both, the coercive field and the loop squareness monotonously increase with the Co content and with the grain size, but no clear correlation with the wire diameter is found. The Co and Co-rich nanowire arrays exhibit coercive fields and reduced remanence values quite insensitive to temperature in the range 4 K–300 K; on the contrary, in Pd-rich nanowires both magnitudes are smaller and they largely increase during cooling below 100 K. These behaviors are systematized by considering the strong dependences displayed by the magneto-crystalline anisotropy and the saturation magnetostriction on composition and temperature. At low temperatures the effective anisotropy value and the domain-wall width to grain size ratio drastically change, promoting less cooperative and harder nucleation modes. - Highlights: • Polycrystalline Co–Pd nanowires, 20–35 nm diameter, 5–12 nm grain size are synthesized. • Coercivity (14–80 mT) and squareness mainly depend on composition and grain size. • Different contributions to the effective anisotropy are considered. • Strong temperature and composition dependence of the nucleation localization is found.

  7. Large-scale organic nanowire lithography and electronics.

    Science.gov (United States)

    Min, Sung-Yong; Kim, Tae-Sik; Kim, Beom Joon; Cho, Himchan; Noh, Yong-Young; Yang, Hoichang; Cho, Jeong Ho; Lee, Tae-Woo

    2013-01-01

    Controlled alignment and patterning of individual semiconducting nanowires at a desired position in a large area is a key requirement for electronic device applications. High-speed, large-area printing of highly aligned individual nanowires that allows control of the exact numbers of wires, and their orientations and dimensions is a significant challenge for practical electronics applications. Here we use a high-speed electrohydrodynamic organic nanowire printer to print large-area organic semiconducting nanowire arrays directly on device substrates in a precisely, individually controlled manner; this method also enables sophisticated large-area nanowire lithography for nano-electronics. We achieve a maximum field-effect mobility up to 9.7 cm(2) V(-1) s(-1) with extremely low contact resistance (organic semiconducting nanowires. Extremely fast nanolithography using printed semiconducting nanowire arrays provide a simple, reliable method of fabricating large-area and flexible nano-electronics.

  8. Optical properties of indium phosphide nanowire ensembles at various temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Lohn, Andrew J; Onishi, Takehiro; Kobayashi, Nobuhiko P [Baskin School of Engineering, University of California Santa Cruz, Santa Cruz, CA 95064 (United States); Nanostructured Energy Conversion Technology and Research (NECTAR), Advanced Studies Laboratories, University of California Santa Cruz-NASA Ames Research Center, Moffett Field, CA 94035 (United States)

    2010-09-03

    Ensembles that contain two types (zincblende and wurtzite) of indium phosphide nanowires grown on non-single crystalline surfaces were studied by micro-photoluminescence and micro-Raman spectroscopy at various low temperatures. The obtained spectra are discussed with the emphasis on the effects of differing lattice types, geometries, and crystallographic orientations present within an ensemble of nanowires grown on non-single crystalline surfaces. In the photoluminescence spectra, a typical Varshni dependence of band gap energy on temperature was observed for emissions from zincblende nanowires and in the high temperature regime energy transfer from excitonic transitions and band-edge transitions was identified. In contrast, the photoluminescence emissions associated with wurtzite nanowires were rather insensitive to temperature. Raman spectra were collected simultaneously from zincblende and wurtzite nanowires coexisting in an ensemble. Raman peaks of the wurtzite nanowires are interpreted as those related to the zincblende nanowires by a folding of the phonon dispersion.

  9. Generalized Pareto for Pattern-Oriented Random Walk Modelling of Organisms' Movements.

    Science.gov (United States)

    Bertrand, Sophie; Joo, Rocío; Fablet, Ronan

    2015-01-01

    How organisms move and disperse is crucial to understand how population dynamics relates to the spatial heterogeneity of the environment. Random walk (RW) models are typical tools to describe movement patterns. Whether Lévy or alternative RW better describes forager movements is keenly debated. We get around this issue using the Generalized Pareto Distribution (GPD). GPD includes as specific cases Normal, exponential and power law distributions, which underlie Brownian, Poisson-like and Lévy walks respectively. Whereas previous studies typically confronted a limited set of candidate models, GPD lets the most likely RW model emerge from the data. We illustrate the wide applicability of the method using GPS-tracked seabird foraging movements and fishing vessel movements tracked by Vessel Monitoring System (VMS), both collected in the Peruvian pelagic ecosystem. The two parameters from the fitted GPD, a scale and a shape parameter, provide a synoptic characterization of the observed movement in terms of characteristic scale and diffusive property. They reveal and quantify the variability, among species and individuals, of the spatial strategies selected by predators foraging on a common prey field. The GPD parameters constitute relevant metrics for (1) providing a synthetic and pattern-oriented description of movement, (2) using top predators as ecosystem indicators and (3) studying the variability of spatial behaviour among species or among individuals with different personalities.

  10. Generalized Pareto for Pattern-Oriented Random Walk Modelling of Organisms’ Movements

    Science.gov (United States)

    Bertrand, Sophie; Joo, Rocío; Fablet, Ronan

    2015-01-01

    How organisms move and disperse is crucial to understand how population dynamics relates to the spatial heterogeneity of the environment. Random walk (RW) models are typical tools to describe movement patterns. Whether Lévy or alternative RW better describes forager movements is keenly debated. We get around this issue using the Generalized Pareto Distribution (GPD). GPD includes as specific cases Normal, exponential and power law distributions, which underlie Brownian, Poisson-like and Lévy walks respectively. Whereas previous studies typically confronted a limited set of candidate models, GPD lets the most likely RW model emerge from the data. We illustrate the wide applicability of the method using GPS-tracked seabird foraging movements and fishing vessel movements tracked by Vessel Monitoring System (VMS), both collected in the Peruvian pelagic ecosystem. The two parameters from the fitted GPD, a scale and a shape parameter, provide a synoptic characterization of the observed movement in terms of characteristic scale and diffusive property. They reveal and quantify the variability, among species and individuals, of the spatial strategies selected by predators foraging on a common prey field. The GPD parameters constitute relevant metrics for (1) providing a synthetic and pattern–oriented description of movement, (2) using top predators as ecosystem indicators and (3) studying the variability of spatial behaviour among species or among individuals with different personalities. PMID:26172045

  11. Generalized Pareto for Pattern-Oriented Random Walk Modelling of Organisms' Movements.

    Directory of Open Access Journals (Sweden)

    Sophie Bertrand

    Full Text Available How organisms move and disperse is crucial to understand how population dynamics relates to the spatial heterogeneity of the environment. Random walk (RW models are typical tools to describe movement patterns. Whether Lévy or alternative RW better describes forager movements is keenly debated. We get around this issue using the Generalized Pareto Distribution (GPD. GPD includes as specific cases Normal, exponential and power law distributions, which underlie Brownian, Poisson-like and Lévy walks respectively. Whereas previous studies typically confronted a limited set of candidate models, GPD lets the most likely RW model emerge from the data. We illustrate the wide applicability of the method using GPS-tracked seabird foraging movements and fishing vessel movements tracked by Vessel Monitoring System (VMS, both collected in the Peruvian pelagic ecosystem. The two parameters from the fitted GPD, a scale and a shape parameter, provide a synoptic characterization of the observed movement in terms of characteristic scale and diffusive property. They reveal and quantify the variability, among species and individuals, of the spatial strategies selected by predators foraging on a common prey field. The GPD parameters constitute relevant metrics for (1 providing a synthetic and pattern-oriented description of movement, (2 using top predators as ecosystem indicators and (3 studying the variability of spatial behaviour among species or among individuals with different personalities.

  12. Promoting physical activity with goal-oriented mental imagery: a randomized controlled trial.

    Science.gov (United States)

    Chan, Carina K Y; Cameron, Linda D

    2012-06-01

    Self-regulation theory and research suggests that different types of mental imagery can promote goal-directed behaviors. The present study was designed to compare the efficacy of approach imagery (attainment of desired goal states) and process imagery (steps for enacting behavior) in promoting physical activity among inactive individuals. A randomized controlled trial was conducted with 182 inactive adults who received one of four interventions for generating mental images related to physical activity over a 4-week period, with Approach Imagery (approach versus neutral) and Process Imagery (process versus no process) as the intervention strategies. Participants received imagery training and practiced daily. Repeated measures ANOVAs revealed that Approach Imagery: (1) increased approach motivations for physical activity at Week 4; (2) induced greater intentions post-session, which subsequently induced more action planning at Week 4; (3) enhanced action planning when combined with process images at post-session and Week 1; and (4) facilitated more physical activity at Week 4 via action planning. These findings suggest that inducing approach orientation via mental imagery may be a convenient and low-cost technique to promote physical activity among inactive individuals.

  13. Influence of crystal shapes on radiative fluxes in visible wavelength: ice crystals randomly oriented in space

    Directory of Open Access Journals (Sweden)

    P. Chervet

    1996-08-01

    Full Text Available Radiative properties of cirrus clouds are one of the major unsolved problems in climate studies and global radiation budget. These clouds are generally composed of various ice-crystal shapes, so we tried to evaluate effects of the ice-crystal shape on radiative fluxes. We calculated radiative fluxes of cirrus clouds with a constant geometrical depth, composed of ice crystals with different shapes (hexagonal columns, bullets, bullet-rosettes, sizes and various concentrations. We considered ice particles randomly oriented in space (3D case and their scattering phase functions were calculated by a ray-tracing method. We calculated radiative fluxes for cirrus layers for different microphysical characteristics by using a discrete-ordinate radiative code. Results showed that the foremost effect of the ice-crystal shape on radiative properties of cirrus clouds was that on the optical thickness, while the variation of the scattering phase function with the ice shape remained less than 3% for our computations. The ice-water content may be a better choice to parameterize the optical properties of cirrus, but the shape effect must be included.

  14. Processing of X-ray snapshots from crystals in random orientations.

    Science.gov (United States)

    Kabsch, Wolfgang

    2014-08-01

    A functional expression is introduced that relates scattered X-ray intensities from a still or a rotation snapshot to the corresponding structure-factor amplitudes. The new approach was implemented in the program nXDS for processing monochromatic diffraction images recorded by a multi-segment detector where each exposure could come from a different crystal. For images containing indexable spots, the intensities of the expected reflections and their variances are obtained by profile fitting after mapping the contributing pixel contents to the Ewald sphere. The varying intensity decline owing to the angular distance of the reflection from the surface of the Ewald sphere is estimated using a Gaussian rocking curve. This decline is dubbed `Ewald offset correction', which is well defined even for still images. Together with an image-scaling factor and other corrections, an explicit expression is defined that predicts each recorded intensity from its corresponding structure-factor amplitude. All diffraction parameters, scaling and correction factors are improved by post-refinement. The ambiguous case of a lower point group than the lattice symmetry is resolved by a method reminiscent of the technique of `selective breeding'. It selects the indexing alternative for each image that yields, on average, the highest correlation with intensities from all other images. Processing a test set of rotation images by XDS and treating the same images by nXDS as snapshots of crystals in random orientations yields data of comparable quality, clearly indicating an anomalous signal from Se atoms.

  15. Arrays of indefinitely long uniform nanowires and nanotubes

    Science.gov (United States)

    Yaman, Mecit; Khudiyev, Tural; Ozgur, Erol; Kanik, Mehmet; Aktas, Ozan; Ozgur, Ekin O.; Deniz, Hakan; Korkut, Enes; Bayindir, Mehmet

    2011-07-01

    Nanowires are arguably the most studied nanomaterial model to make functional devices and arrays. Although there is remarkable maturity in the chemical synthesis of complex nanowire structures, their integration and interfacing to macro systems with high yields and repeatability still require elaborate aligning, positioning and interfacing and post-synthesis techniques. Top-down fabrication methods for nanowire production, such as lithography and electrospinning, have not enjoyed comparable growth. Here we report a new thermal size-reduction process to produce well-ordered, globally oriented, indefinitely long nanowire and nanotube arrays with different materials. The new technique involves iterative co-drawing of hermetically sealed multimaterials in compatible polymer matrices similar to fibre drawing. Globally oriented, endlessly parallel, axially and radially uniform semiconducting and piezoelectric nanowire and nanotube arrays hundreds of metres long, with nanowire diameters less than 15 nm, are obtained. The resulting nanostructures are sealed inside a flexible substrate, facilitating the handling of and electrical contacting to the nanowires. Inexpensive, high-throughput, multimaterial nanowire arrays pave the way for applications including nanowire-based large-area flexible sensor platforms, phase-changememory, nanostructure-enhanced photovoltaics, semiconductor nanophotonics, dielectric metamaterials,linear and nonlinear photonics and nanowire-enabled high-performance composites.

  16. Epitaxial growth of aligned AlGalnN nanowires by metal-organic chemical vapor deposition

    Science.gov (United States)

    Han, Jung; Su, Jie

    2008-08-05

    Highly ordered and aligned epitaxy of III-Nitride nanowires is demonstrated in this work. M-axis is identified as a preferential nanowire growth direction through a detailed study of GaN/AlN trunk/branch nanostructures by transmission electron microscopy. Crystallographic selectivity can be used to achieve spatial and orientational control of nanowire growth. Vertically aligned (Al)GaN nanowires are prepared on M-plane AlN substrates. Horizontally ordered nanowires, extending from the M-plane sidewalls of GaN hexagonal mesas or islands demonstrate new opportunities for self-aligned nanowire devices, interconnects, and networks.

  17. Bilateral robotic priming before task-oriented approach in subacute stroke rehabilitation: a pilot randomized controlled trial.

    Science.gov (United States)

    Hsieh, Yu-Wei; Wu, Ching-Yi; Wang, Wei-En; Lin, Keh-Chung; Chang, Ku-Chou; Chen, Chih-Chi; Liu, Chien-Ting

    2017-02-01

    To investigate the treatment effects of bilateral robotic priming combined with the task-oriented approach on motor impairment, disability, daily function, and quality of life in patients with subacute stroke. A randomized controlled trial. Occupational therapy clinics in medical centers. Thirty-one subacute stroke patients were recruited. Participants were randomly assigned to receive bilateral priming combined with the task-oriented approach (i.e., primed group) or to the task-oriented approach alone (i.e., unprimed group) for 90 minutes/day, 5 days/week for 4 weeks. The primed group began with the bilateral priming technique by using a bimanual robot-aided device. Motor impairments were assessed by the Fugal-Meyer Assessment, grip strength, and the Box and Block Test. Disability and daily function were measured by the modified Rankin Scale, the Functional Independence Measure, and actigraphy. Quality of life was examined by the Stroke Impact Scale. The primed and unprimed groups improved significantly on most outcomes over time. The primed group demonstrated significantly better improvement on the Stroke Impact Scale strength subscale ( p = 0.012) and a trend for greater improvement on the modified Rankin Scale ( p = 0.065) than the unprimed group. Bilateral priming combined with the task-oriented approach elicited more improvements in self-reported strength and disability degrees than the task-oriented approach by itself. Further large-scale research with at least 31 participants in each intervention group is suggested to confirm the study findings.

  18. Modulation of surface trap induced resistive switching by electrode annealing in individual PbS micro/nanowire-based devices for resistance random access memory.

    Science.gov (United States)

    Zheng, Jianping; Cheng, Baochang; Wu, Fuzhang; Su, Xiaohui; Xiao, Yanhe; Guo, Rui; Lei, Shuijin

    2014-12-10

    Bipolar resistive switching (RS) devices are commonly believed as a promising candidate for next generation nonvolatile resistance random access memory (RRAM). Here, two-terminal devices based on individual PbS micro/nanowires with Ag electrodes are constructed, whose electrical transport depends strongly on the abundant surface and bulk trap states in micro/nanostructures. The surface trap states can be filled/emptied effectively at negative/positive bias voltage, respectively, and the corresponding rise/fall of the Fermi level induces a variation in a degenerate/nondegenerate state, resulting in low/high resistance. Moreover, the filling/emptying of trap states can be utilized as RRAM. After annealing, the surface trap state can almost be eliminated completely; while most of the bulk trap states can still remain. In the devices unannealed and annealed at both ends, therefore, the symmetrical back-to-back Fowler-Nordheim tunneling with large ON/OFF resistance ratio and Poole-Frenkel emission with poor hysteresis can be observed under cyclic sweep voltage, respectively. However, a typical bipolar RS behavior can be observed effectively in the devices annealed at one end. The acquirement of bipolar RS and nonvolatile RRAM by the modulation of electrode annealing demonstrates the abundant trap states in micro/nanomaterials will be advantageous to the development of new type electronic components.

  19. Local radial basis function meshless scheme for vector radiative transfer in participating media with randomly oriented axisymmetric particles.

    Science.gov (United States)

    Sun, Jie; Yi, Hong-Liang; Tan, He-Ping

    2016-02-20

    A local radial basis function meshless scheme (LRBFM) is developed to solve polarized radiative transfer in participating media containing randomly oriented axisymmetric particles in which radial basis functions augmented with polynomial basis are employed to construct the trial functions, and the vector radiative-transfer equation based on the discrete-ordinates approach is discretized directly by collocation method. The LRBFM belongs to a class of truly meshless methods that do not need any mesh or any numerical integration scheme. Performances of the LRBFM are verified with analytical solutions and other numerical results reported earlier in the literature via five various test cases. The predicted angular distribution of brightness temperature and Stokes vector by the LRBFM agree very well with the benchmark. It is demonstrated that the LRBFM is accurate to solve vector radiative transfer in participating media with randomly oriented axisymmetric particles.

  20. Magnetic properties of ferromagnetic nanowire arrays: Theory and experiment

    Energy Technology Data Exchange (ETDEWEB)

    Ghaddar, A; Gieraltowski, J [Laboratoire de Magnetisme de Bretagne, UBO, CNRS-FRE 3117, C. S. 93837 Brest Cedex 3 (France); Gloaguen, F, E-mail: abbas.ghaddar@univ-brest.f [Laboratoire de Chimie, Electrochimie Moleculaire et Chimie Analytique, UBO, CNRS-UMR 6521, C. S. 93837 Brest Cedex 3 (France)

    2010-01-01

    Magnetic nanowires are good candidates for microwave filters, sensors and data storage applications. An investigation of magnetic properties of single-component nanowires as a function of diameter and aspect ratio is performed in this work. Nickel nanowire (with 15 and 100 nm diameter and 6000 nm length) are grown with electrodeposition in polycarbonates templates. Two reversal modes (coherent and curling) are studied versus nanowire diameter. Magnetostatic interaction among wires and its effect on nanowire magnetic properties is also studied. Using vibrating magnetometer (VSM) and X-band ferromagnetic resonance (FMR) experiments at room temperature we infer that the interaction field H{sub c} value may vary significantly and may cause a change of magnetic easy axis orientation along geometrical wire axis (for large diameter) to an easy magnetic plane perpendicular to the nanowire axis (for small diameter).

  1. Task-Oriented Training with Computer Games for People with Rheumatoid Arthritis or Hand Osteoarthritis: A Feasibility Randomized Controlled Trial.

    Science.gov (United States)

    Srikesavan, Cynthia Swarnalatha; Shay, Barbara; Szturm, Tony

    2016-09-13

    To examine the feasibility of a clinical trial on a novel, home-based task-oriented training with conventional hand exercises in people with rheumatoid arthritis or hand osteoarthritis. To explore the experiences of participants who completed their respective home exercise programmes. Thirty volunteer participants aged between 30 and 60 years and diagnosed with rheumatoid arthritis or hand osteoarthritis were proposed for a single-center, assessor-blinded, randomized controlled trial ( ClinicalTrials.gov : NCT01635582). Participants received task-oriented training with interactive computer games and objects of daily life or finger mobility and strengthening exercises. Both programmes were home based and were done four sessions per week with 20 minutes each session for 6 weeks. Major feasibility outcomes were number of volunteers screened, randomized, and retained; completion of blinded assessments, exercise training, and home exercise sessions; equipment and data management; and clinical outcomes of hand function. Reaching the recruitment target in 18 months and achieving exercise compliance >80% were set as success criteria. Concurrent with the trial, focus group interviews explored experiences of those participants who completed their respective programmes. After trial initiation, revisions in inclusion criteria were required to promote recruitment. A total of 17 participants were randomized and 15 were retained. Completion of assessments, exercise training, and home exercise sessions; equipment and data collection and management demonstrated excellent feasibility. Both groups improved in hand function outcomes and exercise compliance was above 85%. Participants perceived both programmes as appropriate and acceptable. Participants who completed task-oriented training also agreed that playing different computer games was enjoyable, engaging, and motivating. Findings demonstrate initial evidence on recruitment, feasibility of trial procedures, and acceptability of

  2. Raman Spectroscopy of InAs Based Nanowires & Electronic Characterization of Heterostructure InAs/GaInAs Nanowires

    DEFF Research Database (Denmark)

    Tanta, Rawa

    The work presented in this thesis represents two main topics. The first one, which covers a bigger volume of the thesis, is mainly about Raman spectroscopy on individual InAs based nanowires. The second part presents electronic characterization of heterostructure InAs/GaInAs nanowires. Raman...... modes. In the last chapter of this thesis we present a study on electrical characterization of InAs/GaInAs heterostructure nanowires. First, we performed selective etching experiments in order to locate the barriers. Second, the barriers were probed electrically by performing thermally activated...... spectroscopy measurements on InAs based nanowires include several topics. Firstly, we use polarized Raman spectroscopy for determining the crystal orientation of the nanowires based on conventional Raman selection rules. We studied the effect of the high power laser irradiation on the nanowire, and its...

  3. Metal-dielectric-CNT nanowires for surface-enhanced Raman spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Bond, Tiziana C.; Altun, Ali; Park, Hyung Gyu

    2017-10-03

    A sensor with a substrate includes nanowires extending vertically from the substrate, a hafnia coating on the nanowires that provides hafnia coated nanowires, and a noble metal coating on the hafnia coated nanowires. The top of the hafnia and noble metal coated nanowires bent onto one another to create a canopy forest structure. There are numerous randomly arranged holes that let through scattered light. The many points of contact, hot spots, amplify signals. The methods include the steps of providing a Raman spectroscopy substrate, introducing nano crystals to the Raman spectroscopy substrate, growing a forest of nanowires from the nano crystals on the Raman spectroscopy substrate, coating the nanowires with hafnia providing hafnia coated nanowires, and coating the hafnia coated nanowires with a noble metal or other metal.

  4. Tunneling and Transport in Nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Goldman, Allen M. [Univ. of Minnesota, Minneapolis, MN (United States)

    2016-08-16

    The goal of this program was to study new physical phenomena that might be relevant to the performance of conductive devices and circuits of the smallest realizable feature sizes possible using physical rather than biological techniques. Although the initial scientific work supported involved the use of scanning tunneling microscopy and spectroscopy to ascertain the statistics of the energy level distribution of randomly sized and randomly shaped quantum dots, or nano-crystals, the main focus was on the investigation of selected properties, including superconductivity, of conducting and superconducting nanowires prepared using electron-beam-lithography. We discovered a magnetic-field-restoration of superconductivity in out-of-equilibrium nanowires driven resistive by current. This phenomenon was explained by the existence of a state in which dissipation coexisted with nonvanishing superconducting order. We also produced ultra-small superconducting loops to study a predicted anomalous fluxoid quantization, but instead, found a magnetic-field-dependent, high-resistance state, rather than superconductivity. Finally, we developed a simple and controllable nanowire in an induced charged layer near the surface of a masked single-crystal insulator, SrTiO3. The layer was induced using an electric double layer transistor employing an ionic liquid (IL). The transport properties of the induced nanowire resembled those of collective electronic transport through an array of quantum dots.

  5. Nanowire Optoelectronics

    Directory of Open Access Journals (Sweden)

    Wang Zhihuan

    2015-12-01

    Full Text Available Semiconductor nanowires have been used in a variety of passive and active optoelectronic devices including waveguides, photodetectors, solar cells, light-emitting diodes (LEDs, lasers, sensors, and optical antennas. We review the optical properties of these nanowires in terms of absorption, guiding, and radiation of light, which may be termed light management. Analysis of the interaction of light with long cylindrical/hexagonal structures with subwavelength diameters identifies radial resonant modes, such as Leaky Mode Resonances, or Whispering Gallery modes. The two-dimensional treatment should incorporate axial variations in “volumetric modes,”which have so far been presented in terms of Fabry–Perot (FP, and helical resonance modes. We report on finite-difference timedomain (FDTD simulations with the aim of identifying the dependence of these modes on geometry (length, width, tapering, shape (cylindrical, hexagonal, core–shell versus core-only, and dielectric cores with semiconductor shells. This demonstrates how nanowires (NWs form excellent optical cavities without the need for top and bottommirrors. However, optically equivalent structures such as hexagonal and cylindrical wires can have very different optoelectronic properties meaning that light management alone does not sufficiently describe the observed enhancement in upward (absorption and downward transitions (emission of light inNWs; rather, the electronic transition rates should be considered. We discuss this “rate management” scheme showing its strong dimensional dependence, making a case for photonic integrated circuits (PICs that can take advantage of the confluence of the desirable optical and electronic properties of these nanostructures.

  6. High magnetic field matching effects in NbN films induced by template grown dense ferromagnetic nanowires arrays

    DEFF Research Database (Denmark)

    Hallet, X.; Mátéfi-Tempfli, Mária; Michotte, S.

    2009-01-01

    Dense arrays of ordered ferromagnetic nanowires have been used to create periodic magnetic pinning centers in thin superconducting NbN films. The nanowires were electrodeposited in a highly ordered porous alumina membrane and the thin NbN film was deposited on top of the perpendicularly oriented...... to the magnetization processes of arrays of interacting single domain ferromagnetic nanowires....

  7. Effects of Coping-Oriented Couples Therapy on Depression: A Randomized Clinical Trial

    Science.gov (United States)

    Bodenmann, Guy; Plancherel, Bernard; Beach, Steven R. H.; Widmer, Kathrin; Gabriel, Barbara; Meuwly, Nathalie; Charvoz, Linda; Hautzinger, Martin; Schramm, Elisabeth

    2008-01-01

    The aim of this study was to evaluate the effectiveness of treating depression with coping-oriented couples therapy (COCT) as compared with cognitive-behavioral therapy (CBT; A. T. Beck, C. Ward, & M. Mendelson, 1961) and interpersonal psychotherapy (IPT; M. M. Weissman, J. C. Markowitz, & G. L. Klerman, 2000). Sixty couples, including 1…

  8. Shape dependency of the extinction and absorption cross sections of dust aerosols modeled as randomly oriented spheroids

    Directory of Open Access Journals (Sweden)

    R. Wagner

    2011-09-01

    Full Text Available We present computational results on the shape dependency of the extinction and absorption cross sections of dustlike aerosol particles that were modeled as randomly oriented spheroids. Shape dependent variations in the extinction cross sections are largest in the size regime that is governed by the interference structure. Elongated spheroids best fitted measured extinction spectra of re-dispersed Saharan dust samples. For dust particles smaller than 1.5 μm in diameter and low absorption potential, shape effects on the absorption cross sections are very small.

  9. Characterization and Optical Properties of the Single Crystalline SnS Nanowire Arrays

    Directory of Open Access Journals (Sweden)

    Yue GH

    2009-01-01

    Full Text Available Abstract The SnS nanowire arrays have been successfully synthesized by the template-assisted pulsed electrochemical deposition in the porous anodized aluminum oxide template. The investigation results showed that the as-synthesized nanowires are single crystalline structures and they have a highly preferential orientation. The ordered SnS nanowire arrays are uniform with a diameter of 50 nm and a length up to several tens of micrometers. The synthesized SnS nanowires exhibit strong absorption in visible and near-infrared spectral region and the direct energy gapE gof SnS nanowires is 1.59 eV.

  10. Effect of substrate texture on the growth of hematite nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, Himanshu, E-mail: himsri@rrcat.gov.in [Indus Synchrotron Utilization Division, Raja Ramanna Centre for Advanced Technology, Indore 452013 (India); Tiwari, Pragya; Srivastava, A.K.; Rai, Sanjay; Ganguli, Tapas; Deb, S.K. [Indus Synchrotron Utilization Division, Raja Ramanna Centre for Advanced Technology, Indore 452013 (India)

    2011-10-15

    The effect of texture of iron foil substrate on the growth of hematite nanowires by annealing method has been investigated in detail. Three substrates of different textures were prepared from a [2 0 0] oriented iron foil by some simple processes. The hematite nanowires on these substrates were synthesized by annealing iron foil at 700 deg. C in moist oxygen. The growth pattern of nanowires on these substrates showed that the growth of hematite nanowires depends strongly on the iron substrate texture and [1 1 0] oriented iron grains are necessary for their growth. The samples were characterized by Scanning Electron Microscope (SEM), Transmission Electron Microscope (TEM), X-ray diffraction (XRD), Electron Back Scatter Diffraction (EBSD) and Raman Spectroscopy. We have also tried to explain the various observations on the mechanism of growth. Mainly, the presence of water vapor significantly enhanced the formation of hematite nanowires which resulted in a very dense and aligned growth of nanowires on the substrate areas of favorable texture. Finally, the study proved the substrate texture to be a powerful tool to control growth of nanowires and can be used efficiently for patterning and large scale synthesis of the nanowires.

  11. Periodic nanowire array at the crystal interface.

    Science.gov (United States)

    Nakamura, Atsutomo; Mizoguchi, Teruyasu; Matsunaga, Katsuyuki; Yamamoto, Takahisa; Shibata, Naoya; Ikuhara, Yuichi

    2013-07-23

    A dislocation in a crystalline material has dangling bonds at its core and a strong strain field in its vicinity. Consequently, the dislocation attracts solute atoms and forms a so-called Cottrell atmosphere along the dislocation. A crystalline dislocation can be used as a template to produce nanowires by selectively doping foreign atoms along the dislocation. However, control of the configuration, spacing, and density of the formed periodic nanowire array has heretofore been extremely difficult. Here we show a method for fabricating ordered, electrically conductive nanowire arrays using periodic dislocations at crystal interfaces. As a demonstration, we fabricated arrays of titanium nanowires arranged at intervals of either 13 or 90 nm and then confirmed by scanning probe microscopy that they exhibit electrical conductivity inside an insulating aluminum oxide. Significantly, we were able to precisely control nanowire periodicity by the choice of crystal orientation and/or crystal planes at the crystal interface. This simple method for the fabrication of periodic nanowire arrays of highly controlled density should be widely applicable to electrical, magnetic, and optical devices.

  12. Growth and characterization of bismuth telluride nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Picht, Oliver

    2010-05-26

    Polycrystalline Bi{sub 2}Te{sub 3} nanowires are electrochemically grown in ion track-etched polycarbonate membranes. Potentiostatic growth is demonstrated in templates of various thicknesses ranging from 10 to 100 {mu}m. The smallest observed nanowire diameters are 20 nm in thin membranes and approx. 140-180 nm in thicker membranes. The influence of the various deposition parameters on the nanowire growth rate is presented. Slower growth rates are attained by selective change of deposition potentials and lower temperatures. Nanowires synthesized at slower growth rates have shown to possess a higher degree of crystalline order and smoother surface contours. With respect to structural properties, X-ray diffraction and transmission electron microscopy verified the growth of Bi{sub 2}Te{sub 3} and evidenced the stability of specific properties, e.g. grain size or preferential orientation, with regard to variations in the deposition conditions. The interdependency of the fabrication parameters, i.e. temperature, deposition potential and nanochannel diameters, is demonstrated for wires grown in 30 {mu}m thick membranes. It is visible from diffraction analysis that texture is tunable by the growth conditions but depends also on the size of the nanochannels in the template. Both (015) and (110) reflexes are observed for the nanowire arrays. Energy dispersive X-ray analysis further points out that variation of nanochannel size could lead to a change in elemental composition of the nanowires. (orig.)

  13. Copper Nanowire Production for Interconnect Applications

    Science.gov (United States)

    Han, Jin-Woo (Inventor); Meyyappan, Meyya (Inventor)

    2014-01-01

    A method of fabricating metallic Cu nanowires with lengths up to about 25 micrometers and diameters in a range 20-100 nanometers, or greater if desired. Vertically oriented or laterally oriented copper oxide structures (CuO and/or Cu2O) are grown on a Cu substrate. The copper oxide structures are reduced with 99+ percent H or H2, and in this reduction process the lengths decrease (to no more than about 25 micrometers), the density of surviving nanostructures on a substrate decreases, and the diameters of the surviving nanostructures have a range, of about 20-100 nanometers. The resulting nanowires are substantially pure Cu and can be oriented laterally (for local or global interconnects) or can be oriented vertically (for standard vertical interconnects).

  14. Vertical nanowire architectures

    DEFF Research Database (Denmark)

    Vlad, A.; Mátéfl-Tempfli, M.; Piraux, L.

    2010-01-01

    Nanowires and statistics: A statistical process for reading ultradense arrays of nanostructured materials is presented (see image). The experimental realization is achieved through selective nanowire growth using porous alumina templates. The statistical patterning approach is found to provide ri...

  15. Nanowire-based detector

    Science.gov (United States)

    Berggren, Karl K; Hu, Xiaolong; Masciarelli, Daniele

    2014-06-24

    Systems, articles, and methods are provided related to nanowire-based detectors, which can be used for light detection in, for example, single-photon detectors. In one aspect, a variety of detectors are provided, for example one including an electrically superconductive nanowire or nanowires constructed and arranged to interact with photons to produce a detectable signal. In another aspect, fabrication methods are provided, including techniques to precisely reproduce patterns in subsequently formed layers of material using a relatively small number of fabrication steps. By precisely reproducing patterns in multiple material layers, one can form electrically insulating materials and electrically conductive materials in shapes such that incoming photons are redirected toward a nearby electrically superconductive materials (e.g., electrically superconductive nanowire(s)). For example, one or more resonance structures (e.g., comprising an electrically insulating material), which can trap electromagnetic radiation within its boundaries, can be positioned proximate the nanowire(s). The resonance structure can include, at its boundaries, electrically conductive material positioned proximate the electrically superconductive nanowire such that light that would otherwise be transmitted through the sensor is redirected toward the nanowire(s) and detected. In addition, electrically conductive material can be positioned proximate the electrically superconductive nanowire (e.g. at the aperture of the resonant structure), such that light is directed by scattering from this structure into the nanowire.

  16. The Self- and Directed Assembly of Nanowires

    Science.gov (United States)

    Smith, Benjamin David

    This thesis explores the self- and directed assembly of nanowires. Specifically, we examine the driving forces behind nanowire self-assembly and the macro-structures that are formed. Particle-dense, oriented nanowire structures show promise in the fields of photonics, energy, sensing, catalysis, and electronics. Arrays of spherical particles have already found uses in electronic inks, sensing arrays, and many other commercial applications; but, it is a challenge to create specific arrays of morphologically and/or compositionally anisotropic particles. The following chapters illuminate the interactions that drive the assembly of anisotropic particles in high density solutions in the absence of applied fields or solution drying. Special emphasis is placed on the structures that are formed. The properties of micro- and nanoparticles and their assembly are introduced in Chapter 1. In particular, the properties of shape and material anisotropic particles are highlighted, while challenges in producing desired arrays are discussed. In this thesis, metallic nanowires of increasing complexity were used to examine the self-assembly behavior of both shape and material anisotropic particles. Nanowires were synthesized through templated electrodeposition. In this process, porous alumina membranes served as a template in which metal salts were reduced to form particles. Upon template dissolution, billions of nominally identical particles were released. We specifically focused on segmented, metallic nanowires 2-13 mum in length and 180 to 350 nm in diameter. Since these particles have strong van der Waals (VDWs) attractions, an electrostatically repulsive coating was necessary to prevent aggregation; we used small molecule, DNA, or amorphous silica coatings. Nanowires and their coatings were characterized by electron microscopy. In order to study self-assembly behavior, particle-dense aqueous suspensions were placed within an assembly chamber defined by a silicone spacer. The

  17. The Synthesis of Highly Aligned Cupric Oxide Nanowires by Heating Copper Foil

    Directory of Open Access Journals (Sweden)

    Jianbo Liang

    2011-01-01

    Full Text Available We have investigated the effects of grain size and orientation of copper substrates for the growth of cupric oxide nanowires by thermal oxidation method. Long, less-roughness, high-density, and aligned cupric oxide nanowires have been synthesized by heating (200 oriented copper foils with small grain size in air gas. Long and aligned nanowires of diameter around 80 nm can only be formed within a short temperature range from 400 to 700°C. On the other hand, uniform, smooth-surface, and aligned nanowires were not formed in the case of larger crystallite size of copper foils with (111 and (200 orientation. Smaller grain size of copper foil with (200 orientation is favorable for the growth of highly aligned, smooth surface, and larger-diameter nanowires by thermal oxidation method.

  18. Abrupt Schottky Junctions in Al/Ge Nanowire Heterostructures.

    Science.gov (United States)

    Kral, S; Zeiner, C; Stöger-Pollach, M; Bertagnolli, E; den Hertog, M I; Lopez-Haro, M; Robin, E; El Hajraoui, K; Lugstein, A

    2015-07-08

    In this Letter we report on the exploration of axial metal/semiconductor (Al/Ge) nanowire heterostructures with abrupt interfaces. The formation process is enabled by a thermal induced exchange reaction between the vapor-liquid-solid grown Ge nanowire and Al contact pads due to the substantially different diffusion behavior of Ge in Al and vice versa. Temperature-dependent I-V measurements revealed the metallic properties of the crystalline Al nanowire segments with a maximum current carrying capacity of about 0.8 MA/cm(2). Transmission electron microscopy (TEM) characterization has confirmed both the composition and crystalline nature of the pure Al nanowire segments. A very sharp interface between the ⟨111⟩ oriented Ge nanowire and the reacted Al part was observed with a Schottky barrier height of 361 meV. To demonstrate the potential of this approach, a monolithic Al/Ge/Al heterostructure was used to fabricate a novel impact ionization device.

  19. A first-principles study of the thermodynamic and electronic properties of Mg and MgH2 nanowires.

    Science.gov (United States)

    Wu, Xinxing; Zhang, Ruiqi; Yang, Jinlong

    2016-07-28

    In this article, we studied the thermodynamic and electronic properties of Mg and MgH2 nanowires with different diameters, and elucidated why MgH2 nanowires are good hydrogen storage materials through first-principles calculations. Previous experiments have shown that the orientation relationship between Mg and MgH2 nanowires is the Mg[0001] direction parallel to the MgH2[110] direction. In our calculations, Mg nanowires oriented along the [0001] direction and MgH2 nanowires oriented along the [110] direction were built from bulk Mg and MgH2 crystals, respectively. We found that as the diameters of Mg and MgH2 nanowires decrease, Mg and MgH2 nanowires become more unstable, and the hydrogen desorption energies and temperatures of MgH2 nanowires decrease. That is, the thinner the MgH2 nanowires get, the more dramatically hydrogen desorption temperatures (Td) will decrease. Meanwhile, we also found that when the diameters of MgH2 nanowires are larger than 1.94 nm, the Td almost maintain the same value at about 440 K, only about 40 K lower than that of bulk MgH2 crystal; if the diameters are less than 1.94 nm, the Td reduce very quickly. In particular, compared with bulk MgH2 crystal, the Td of the thinnest MgH2 nanowire with a diameter of 0.63 nm can be reduced by 164 K. In addition, the electronic structure calculations showed that Mg nanowires are metals, while MgH2 nanowires are semiconductors. In particular, our results showed that the electronic structures of MgH2 nanowires are influenced by the surface effect and quantum size effect. That is to say, the band gaps of MgH2 nanowires are controlled by surface electronic states and the size of MgH2 nanowires.

  20. Economic evaluation of schema therapy and clarification-oriented psychotherapy for personality disorders: a multicenter, randomized controlled trial.

    Science.gov (United States)

    Bamelis, Lotte L M; Arntz, Arnoud; Wetzelaer, Pim; Verdoorn, Ryanne; Evers, Silvia M A A

    2015-11-01

    To compare from a societal perspective the cost-effectiveness and cost-utility of schema therapy, clarification-oriented psychotherapy, and treatment as usual for patients with avoidant, dependent, obsessive-compulsive, paranoid, histrionic, and/or narcissistic personality disorder. A multicenter, randomized controlled trial, single-blind parallel design, was conducted between May 2006 and December 2011 in 12 Dutch mental health institutes. Data from 320 patients (diagnosed according to DSM-IV criteria) randomly assigned to schema therapy (n = 145), treatment as usual (n = 134), or clarification-oriented psychotherapy (n = 41) were analyzed. Costs were repeatedly measured during 36 months by interview and patient registries. Primary outcome measures were proportion of recovered patients as measured with the Structured Clinical Interview for DSM-IV Axis II Personality Disorders for the cost-effectiveness analysis, and quality-adjusted life-years (QALYs) for the cost-utility analysis. Bootstrap replications in the cost-effectiveness and the cost-utility planes were used to estimate the probability that one treatment was more cost-effective than the other. Mixed gamma regression on net monetary benefit for different levels of willingness to pay for extra effects was used as sensitivity analysis. Additional sensitivity analyses were done to assess robustness of the results. Due to higher clinical effects and lower costs, schema therapy was dominant over the other treatments in the cost-effectiveness analyses. Schema therapy has the probability of being the most cost-effective treatment (78% at €0 to 96% at €37,500 [$27,375] willingness to pay per extra recovery). Treatment as usual was more cost-effective than clarification-oriented psychotherapy due to lower costs. In the cost-utility analysis, schema therapy had a stable 75% probability of being cost-effective. Sensitivity analyses confirmed these findings. The results support the cost-effectiveness of schema

  1. Atomic-scale understanding of dichlorobenzene-assisted poly 3-hexylthiophene-2,5-diyl nanowire formation mechanism

    Science.gov (United States)

    Yagmurcukardes, M.; Kiymaz, D.; Zafer, C.; Senger, R. T.; Sahin, H.

    2017-04-01

    Low-dimensional Poly 3-hexylthiophene-2,5-diyl (P3HT) structures that serve efficient exciton dissociation in organic solar cells, play a major role in increasing the charge collection, and hence, the efficiency of organic devices. In this study, we theoretically and experimentally investigate the Dichlorobenzene (DCB)-assisted formation of P3HT nanowires. Our experiments show that the solution of DCB molecules drive randomly oriented P3HT polymers to form well-stacked nanowires by stabilizing tail-tail and π-π interactions. Here the question is how DCB molecules migrate into the P3HT layers while forming the nanowire structure. Our density functional theory-based calculations reveal that the vertical migration of the DCB molecules between P3HT layers is forbidden due to a high energy barrier that stems from strong alkyl chain-DCB interaction. In contrast to vertical diffusion, lateral diffusion of DCB molecules in between P3HT layers is much more likely. Our results show that migration of a DCB molecule occurs through the alkyl groups with a low energy barrier. Therefore, laterally diffused DCB molecules assist nucleation of top-to-top stacking of P3HT polymers and formation of well-ordered nanowires.

  2. Stability of Organic Nanowires

    DEFF Research Database (Denmark)

    Balzer, F.; Schiek, M.; Wallmann, I.

    2011-01-01

    The morphological stability of organic nanowires over time and under thermal load is of major importance for their use in any device. In this study the growth and stability of organic nanowires from a naphthyl end-capped thiophene grown by organic molecular beam deposition is investigated via...... atomic force microscopy (AFM). Aging experiments under ambient conditions already show substantial morphological changes. Nanoscopic organic clusters, which initially coexist with the nanowires, vanish within hours. Thermal annealing of nanowire samples leads to even more pronounced morphology changes......, such as a strong decrease in nanowire number density, a strong increase in nanowire height, and the formation of new types of crystallites. This happens even before sublimation of organic material starts. These experiments also shine new light on the formation process of the nanowires....

  3. Realizing field-dependent conduction in ZnO nanowires without annealing

    Science.gov (United States)

    Burke-Govey, C. P.; Castanet, U.; Warring, H.; Nau, A.; Ruck, B. J.; Majimel, J.; Plank, N. O. V.

    2017-03-01

    We report on the low-temperature fabrication of field-effect transistors by bridging pre-patterned electrodes using ZnO nanowires grown in situ, which operate without requiring post-growth processing or annealing. The devices show good performance using as-grown nanowires, with on-off ratios of 105 and threshold voltages of 2 V. Electron microscopy shows the field-dependent nanowires hierarchically nucleate from larger ZnO nanorods, and both are oriented along a common c-axis. A high nanowire surface-to-volume ratio allows depleting electron traps on the nanowire surface to compensate intrinsic electron donors present throughout the nanowire bulk. This eliminates the need to reduce the electron concentration through high-temperature annealing, making the nanowires naturally field-dependent in their as-grown state.

  4. Vertical III-V nanowire device integration on Si(100).

    Science.gov (United States)

    Borg, Mattias; Schmid, Heinz; Moselund, Kirsten E; Signorello, Giorgio; Gignac, Lynne; Bruley, John; Breslin, Chris; Das Kanungo, Pratyush; Werner, Peter; Riel, Heike

    2014-01-01

    We report complementary metal-oxide-semiconductor (CMOS)-compatible integration of compound semiconductors on Si substrates. InAs and GaAs nanowires are selectively grown in vertical SiO2 nanotube templates fabricated on Si substrates of varying crystallographic orientations, including nanocrystalline Si. The nanowires investigated are epitaxially grown, single-crystalline, free from threading dislocations, and with an orientation and dimension directly given by the shape of the template. GaAs nanowires exhibit stable photoluminescence at room temperature, with a higher measured intensity when still surrounded by the template. Si-InAs heterojunction nanowire tunnel diodes were fabricated on Si(100) and are electrically characterized. The results indicate a high uniformity and scalability in the fabrication process.

  5. Highly efficient hybrid energy generator: coupled organic photovoltaic device and randomly oriented electrospun poly(vinylidene fluoride) nanofiber.

    Science.gov (United States)

    Park, Boongik; Lee, Kihwan; Park, Jongjin; Kim, Jongmin; Kim, Ohyun

    2013-03-01

    A hybrid architecture consisting of an inverted organic photovoltaic device and a randomly-oriented electrospun PVDF piezoelectric device was fabricated as a highly-efficient energy generator. It uses the inverted photovoltaic device with coupled electrospun PVDF nanofibers as tandem structure to convert solar and mechanical vibrations energy to electricity simultaneously or individually. The power conversion efficiency of the photovoltaic device was also significantly improved up to 4.72% by optimized processes such as intrinsic ZnO, MoO3 and active layer. A simple electrospinning method with the two electrode technique was adopted to achieve a high voltage of - 300 mV in PVDF piezoelectric fibers. Highly-efficient HEG using voltage adder circuit provides the conceptual possibility of realizing multi-functional energy generator whenever and wherever various energy sources are available.

  6. Nanofabrication of structures for the study of nanowire doping

    Science.gov (United States)

    Eichfeld, Chad

    characterized by electron microscopy and found to be single crystal and to grow oriented to the growth substrate. 4-pt electrical resistivity measurements of the silicon nanowires were made. The resistivity measured ranged from of 0.005-0.017 O-cm, corresponding to an impurity concentration 7 x 1018 to 2 x 1019 cm-3 assuming bulk mobility. Calculations show that possible error from depletion at the surface has only a small effect on the calculated resistivity for a 100 nm diameter nanowire at this high of a doping concentration. The results of LEAP metrology analysis of the Al catalyzed nanowires show an estimated Al concentration of 0.4 atomic percent or 2 x 1020 cm-3 about 200 nm from the nanowire tip, where the concentration appears to have leveled out. This value is higher than would be expected from the solubility published for Al.

  7. Resource-oriented coaching for reduction of examination-related stress in medical students: an exploratory randomized controlled trial.

    Science.gov (United States)

    Kötter, Thomas; Niebuhr, Frank

    2016-01-01

    The years spent in acquiring medical education is considered a stressful period in the life of many students. Students whose mental health deteriorates during this long period of study are less likely to become empathic and productive physicians. In addition to other specific stressors, academic examinations seem to further induce medical school-related stress and anxiety. Combined group and individual resource-oriented coaching early in medical education might reduce examination-related stress and anxiety and, consequently, enhance academic performance. Good quality evidence, however, remains scarce. In this study, therefore, we explored the question of whether coaching affects examination-related stress and health in medical students. We conducted a randomized controlled trial. Students who registered for the first medical academic examination in August 2014 at the University of Lübeck were recruited and randomized into three groups. The intervention groups 1 and 2 received a 1-hour psychoeducative seminar. Group 1 additionally received two 1-hour sessions of individual coaching during examination preparation. Group 3 served as a control group. We compared changes in self-rated general health (measured by a single item), anxiety and depression (measured by the hospital anxiety and depression scale), as well as medical school stress (measured by the perceived medical school stress instrument). In order to further investigate the influence of group allocation on perceived medical school stress, we conducted a linear regression analysis. We saw a significant deterioration of general health and an increase in anxiety and depression scores in medical students while preparing for an examination. We found a small, but statistically significant, effect of group allocation on the development of perceived medical school stress. However, we could not differentiate between the effects of group coaching only and group coaching in combination with two sessions of individual

  8. Object-oriented Markov random model for classification of high resolution satellite imagery based on wavelet transform

    Science.gov (United States)

    Hong, Liang; Liu, Cun; Yang, Kun; Deng, Ming

    2013-07-01

    The high resolution satellite imagery (HRSI) have higher spatial resolution and less spectrum number, so there are some "object with different spectra, different objects with same spectrum" phenomena. The objective of this paper is to utilize the extracted features of high resolution satellite imagery (HRSI) obtained by the wavelet transform(WT) for segmentation. WT provides the spatial and spectral characteristics of a pixel along with its neighbors. The object-oriented Markov random Model in the wavelet domain is proposed in order to segment high resolution satellite imagery (HRSI). The proposed method is made up of three blocks: (1) WT-based feature extrcation.the aim of extraction of feature using WT for original spectral bands is to exploit the spatial and frequency information of the pixels; (2) over-segmentation object generation. Mean-Shift algorithm is employed to obtain over-segmentation objects; (3) classification based on Object-oriented Markov Random Model. Firstly the object adjacent graph (OAG) can be constructed on the over-segmentation objects. Secondly MRF model is easily defined on the OAG, in which WT-based feature of pixels are modeled in the feature field model and the neighbor system, potential cliques and energy functions of OAG are exploited in the labeling model. Experiments are conducted on one HRSI dataset-QuickBird images. We evaluate and compare the proposed approach with the well-known commercial software eCognition(object-based analysis approach) and Maximum Likelihood(ML) based pixels. Experimental results show that the proposed the method in this paper obviously outperforms the other methods.

  9. Magnetic localization and orientation of the capsule endoscope based on a random complex algorithm

    Directory of Open Access Journals (Sweden)

    He XQ

    2015-04-01

    Full Text Available Xiaoqi He,1 Zizhao Zheng,1,2 Chao Hu1 1Ningbo Institute of Technology, Zhejiang University, Ningbo, People's Republic of China; 2Taiyuan University of Science and Technology, Taiyuan, People's Republic of China Abstract: The development of the capsule endoscope has made possible the examination of the whole gastrointestinal tract without much pain. However, there are still some important problems to be solved, among which, one important problem is the localization of the capsule. Currently, magnetic positioning technology is a suitable method for capsule localization, and this depends on a reliable system and algorithm. In this paper, based on the magnetic dipole model as well as magnetic sensor array, we propose nonlinear optimization algorithms using a random complex algorithm, applied to the optimization calculation for the nonlinear function of the dipole, to determine the three-dimensional position parameters and two-dimensional direction parameters. The stability and the antinoise ability of the algorithm is compared with the Levenberg–Marquart algorithm. The simulation and experiment results show that in terms of the error level of the initial guess of magnet location, the random complex algorithm is more accurate, more stable, and has a higher “denoise” capacity, with a larger range for initial guess values. Keywords: wireless capsule endoscope, magnet, optimization 

  10. Emergency Department Management of Sepsis Patients: A Randomized, Goal-Oriented, Noninvasive Sepsis Trial.

    Science.gov (United States)

    Kuan, Win Sen; Ibrahim, Irwani; Leong, Benjamin S H; Jain, Swati; Lu, Qingshu; Cheung, Yin Bun; Mahadevan, Malcolm

    2016-03-01

    The noninvasive cardiac output monitor and passive leg-raising maneuver has been shown to be reasonably accurate in predicting fluid responsiveness in critically ill patients. We examine whether using a noninvasive protocol would result in more rapid lactate clearance after 3 hours in patients with severe sepsis and septic shock in the emergency department. In this open-label randomized controlled trial, 122 adult patients with sepsis and serum lactate concentration of greater than or equal to 3.0 mmol/L were randomized to receive usual care or intravenous fluid bolus administration guided by measurements of change of stroke volume index, using the noninvasive cardiac output monitor after passive leg-raising maneuver. The primary outcome was lactate clearance of more than 20% at 3 hours. Secondary outcomes included mortality, length of hospital and ICU stay, and total hospital cost. Analysis was intention to treat. Similar proportions of patients in the randomized intervention group (70.5%; N=61) versus control group (73.8%; N=61) achieved the primary outcome, with a relative risk of 0.96 (95% confidence interval [CI] 0.77 to 1.19). Secondary outcomes were similar in both groups (P>.05 for all comparisons). Hospital mortality occurred in 6 patients (9.8%) each in the intervention and control groups on or before 28 days (relative risk=1.00; 95% CI 0.34 to 2.93). Among a subgroup of patients with underlying fluid overload states, those in the intervention group tended to receive clinically significantly more intravenous fluids at 3 hours (difference=975 mL; 95% CI -450 to 1,725 mL) and attained better lactate clearance (difference=19.7%; 95% CI -34.6% to 60.2%) compared with the control group, with shorter hospital lengths of stay (difference=-4.5 days; 95% CI -9.5 to 2.5 days). Protocol-based fluid resuscitation of patients with severe sepsis and septic shock with the noninvasive cardiac output monitor and passive leg-raising maneuver did not result in better

  11. UV irradiation assisted growth of ZnO nanowires on optical fiber surface

    Energy Technology Data Exchange (ETDEWEB)

    Gong, Bo; Shi, Tielin; Liao, Guanglan; Li, Xiaoping; Huang, Jie; Zhou, Temgyuan; Tang, Zirong, E-mail: zirong@mail.hust.edu.cn

    2017-06-01

    Highlights: • A new fabrication process combined a hydrothermal process with UV irradiation from optical fiber is developed. • The growth of ZnO nanowires is efficient in the utilization of UV light. • A novel hybrid structure which integrates ZnO nanowires on optical fiber surface is synthesized. • The UV assisted growth of ZnO nanowires shows preferred orientation and better quality. • A mechanism of growing ZnO nanowires under UV irradiation is proposed. - Abstract: In this paper, a novel approach was developed for the enhanced growth of ZnO nanowires on optical fiber surface. The method combined a hydrothermal process with the efficient UV irradiation from the fiber core, and the effects of UV irradiation on the growth behavior of ZnO nanowires were investigated. The results show that UV irradiation had great effects on the preferred growth orientation and the quality of the ZnO nanowires. The crystallization velocity along the c-axis would increase rapidly with the increase of the irradiation power, while the growth process in the lateral direction was marginally affected by the irradiation. The structure of ZnO nanowires also shows less oxygen vacancy with UV irradiation of higher power. The developed approach is applicable for the efficient growth of nanowires on the fiber surface, and the ZnO nanowires/optical fiber hybrid structures have great potentials for a wide variety of applications such as optical fiber sensors and probes.

  12. Nanomechanics of Single Crystalline Tungsten Nanowires

    Directory of Open Access Journals (Sweden)

    Volker Cimalla

    2008-01-01

    Full Text Available Single crystalline tungsten nanowires were prepared from directionally solidified NiAl-W alloys by a chemical release from the resulting binary phase material. Electron back scatter diffraction (EBSD proves that they are single crystals having identical crystallographic orientation. Mechanical investigations such as bending tests, lateral force measurements, and mechanical resonance measurements were performed on 100–300 nm diameter wires. The wires could be either directly employed using micro tweezers, as a singly clamped nanowire or in a doubly clamped nanobridge. The mechanical tests exhibit a surprisingly high flexibility for such a brittle material resulting from the small dimensions. Force displacement measurements on singly clamped W nanowires by an AFM measurement allowed the determination of a Young's modulus of 332 GPa very close to the bulk value of 355 GPa. Doubly clamped W nanowires were employed as resonant oscillating nanowires in a magnetomotively driven resonator running at 117 kHz. The Young's modulus determined from this setup was found to be higher 450 GPa which is likely to be an artefact resulting from the shift of the resonance frequency by an additional mass loading.

  13. Guided Growth of Horizontal p-Type ZnTe Nanowires.

    Science.gov (United States)

    Reut, Gilad; Oksenberg, Eitan; Popovitz-Biro, Ronit; Rechav, Katya; Joselevich, Ernesto

    2016-08-04

    A major challenge toward large-scale integration of nanowires is the control over their alignment and position. A possible solution to this challenge is the guided growth process, which enables the synthesis of well-aligned horizontal nanowires that grow according to specific epitaxial or graphoepitaxial relations with the substrate. However, the guided growth of horizontal nanowires was demonstrated for a limited number of materials, most of which exhibit unintentional n-type behavior. Here we demonstrate the vapor-liquid-solid growth of guided horizontal ZnTe nanowires and nanowalls displaying p-type behavior on four different planes of sapphire. The growth directions of the nanowires are determined by epitaxial relations between the nanowires and the substrate or by a graphoepitaxial effect that guides their growth along nanogrooves or nanosteps along the surface. We characterized the crystallographic orientations and elemental composition of the nanowires using transmission electron microscopy and photoluminescence. The optoelectronic and electronic properties of the nanowires were studied by fabricating photodetectors and top-gate thin film transistors. These measurements showed that the guided ZnTe nanowires are p-type semiconductors and are photoconductive in the visible range. The guided growth of horizontal p-type nanowires opens up the possibility of parallel nanowire integration into functional systems with a variety of potential applications not available by other means.

  14. Advances in nanowire bioelectronics

    Science.gov (United States)

    Zhou, Wei; Dai, Xiaochuan; Lieber, Charles M.

    2017-01-01

    Semiconductor nanowires represent powerful building blocks for next generation bioelectronics given their attractive properties, including nanometer-scale footprint comparable to subcellular structures and bio-molecules, configurable in nonstandard device geometries readily interfaced with biological systems, high surface-to-volume ratios, fast signal responses, and minimum consumption of energy. In this review article, we summarize recent progress in the field of nanowire bioelectronics with a focus primarily on silicon nanowire field-effect transistor biosensors. First, the synthesis and assembly of semiconductor nanowires will be described, including the basics of nanowire FETs crucial to their configuration as biosensors. Second, we will introduce and review recent results in nanowire bioelectronics for biomedical applications ranging from label-free sensing of biomolecules, to extracellular and intracellular electrophysiological recording.

  15. Resource-oriented coaching for reduction of examination-related stress in medical students: an exploratory randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Kötter T

    2016-08-01

    Full Text Available Thomas Kötter,1 Frank Niebuhr2 1Institute of Social Medicine and Epidemiology, 2Institute of Family Medicine, University of Lübeck, Lübeck, Germany Introduction: The years spent in acquiring medical education is considered a stressful period in the life of many students. Students whose mental health deteriorates during this long period of study are less likely to become empathic and productive physicians. In addition to other specific stressors, academic examinations seem to further induce medical school-related stress and anxiety. Combined group and individual resource-oriented coaching early in medical education might reduce examination-related stress and anxiety and, consequently, enhance academic performance. Good quality evidence, however, remains scarce. In this study, therefore, we explored the question of whether coaching affects examination-related stress and health in medical students.Methods: We conducted a randomized controlled trial. Students who registered for the first medical academic examination in August 2014 at the University of Lübeck were recruited and randomized into three groups. The intervention groups 1 and 2 received a 1-hour psychoeducative seminar. Group 1 additionally received two 1-hour sessions of individual coaching during examination preparation. Group 3 served as a control group. We compared changes in self-rated general health (measured by a single item, anxiety and depression (measured by the hospital anxiety and depression scale, as well as medical school stress (measured by the perceived medical school stress instrument. In order to further investigate the influence of group allocation on perceived medical school stress, we conducted a linear regression analysis.Results: We saw a significant deterioration of general health and an increase in anxiety and depression scores in medical students while preparing for an examination. We found a small, but statistically significant, effect of group allocation on

  16. The effect of integrated emotion-oriented care versus usual care on elderly persons with dementia in the nursing home and on nursing assistants: a randomized clinical trial

    NARCIS (Netherlands)

    Finnema, E.J.; Dr�es, R.M.; Ettema, T.P.; Ooms, M.E.; Adèr, H.J.; Ribbe, M.W.; van Tilburg, W.

    2005-01-01

    Objectives: To examine the effect of integrated emotion-oriented care on nursing home residents with dementia and nursing assistants. Design: A multi-site randomized clinical trial with matched groups, and measurements at baseline and after seven months. Setting: Sixteen psychogeriatric wards in

  17. The effect of integrated emotion-oriented care versus usual care on elderly persons with dementia in the nursing home and on nursing assistants: a randomized clinical trial

    NARCIS (Netherlands)

    Finnema, E.J.; Dr�es, R.M.; Ettema, T.P.; Ooms, M.E.; Adèr, H.J.; Ribbe, M.W.; Tilburg, van W.

    2005-01-01

    OBJECTIVES: To examine the effect of integrated emotion-oriented care on nursing home residents with dementia and nursing assistants. DESIGN: A multi-site randomized clinical trial with matched groups, and measurements at baseline and after seven months. SETTING: Sixteen psychogeriatric wards in

  18. Synthesis of CoFe 2O 4 nanowire arrays by sol-gel template method

    Science.gov (United States)

    Ji, Guangbin; Tang, Shaolong; Xu, Baolong; Gu, Benxi; Du, Youwei

    2003-10-01

    CoFe 2O 4 nanowire arrays with an average diameter of about 40 nm were prepared in porous anodic aluminum oxide (AAO) template using sol-gel process. Transmission electron microscopy (TEM) diffraction pattern and X-ray diffraction (XRD) showed that the nanowires were polycrystalline phase. Magnetic measurements showed the arrays of nanowires did not show a preferential magnetic orientation, the reason was briefly discussed. The effect of heating rate on the structure and magnetic properties of CoFe 2O 4 nanowire arrays was investigated. The result showed that the coercivity decreased with the increase of the heating rate.

  19. Statistical analysis of the breaking processes of Ni nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Garcia-Mochales, P [Departamento de Fisica de la Materia Condensada, Facultad de Ciencias, Universidad Autonoma de Madrid, c/ Francisco Tomas y Valiente 7, Campus de Cantoblanco, E-28049-Madrid (Spain); Paredes, R [Centro de Fisica, Instituto Venezolano de Investigaciones CientIficas, Apartado 20632, Caracas 1020A (Venezuela); Pelaez, S; Serena, P A [Instituto de Ciencia de Materiales de Madrid, Consejo Superior de Investigaciones CientIficas, c/ Sor Juana Ines de la Cruz 3, Campus de Cantoblanco, E-28049-Madrid (Spain)], E-mail: pedro.garciamochales@uam.es

    2008-06-04

    We have performed a massive statistical analysis on the breaking behaviour of Ni nanowires using molecular dynamic simulations. Three stretching directions, five initial nanowire sizes and two temperatures have been studied. We have constructed minimum cross-section histograms and analysed for the first time the role played by monomers and dimers. The shape of such histograms and the absolute number of monomers and dimers strongly depend on the stretching direction and the initial size of the nanowire. In particular, the statistical behaviour of the breakage final stages of narrow nanowires strongly differs from the behaviour obtained for large nanowires. We have analysed the structure around monomers and dimers. Their most probable local configurations differ from those usually appearing in static electron transport calculations. Their non-local environments show disordered regions along the nanowire if the stretching direction is [100] or [110]. Additionally, we have found that, at room temperature, [100] and [110] stretching directions favour the appearance of non-crystalline staggered pentagonal structures. These pentagonal Ni nanowires are reported in this work for the first time. This set of results suggests that experimental Ni conducting histograms could show a strong dependence on the orientation and temperature.

  20. Standard practice for X-Ray determination of retained austenite in steel with near random crystallographic orientation

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2003-01-01

    1.1 This practice covers the determination of retained austenite phase in steel using integrated intensities (area under peak above background) of X-ray diffraction peaks using chromium Kα or molybdenum Kα X-radiation. 1.2 The method applies to carbon and alloy steels with near random crystallographic orientations of both ferrite and austenite phases. 1.3 This practice is valid for retained austenite contents from 1 % by volume and above. 1.4 If possible, X-ray diffraction peak interference from other crystalline phases such as carbides should be eliminated from the ferrite and austenite peak intensities. 1.5 Substantial alloy contents in steel cause some change in peak intensities which have not been considered in this method. Application of this method to steels with total alloy contents exceeding 15 weight % should be done with care. If necessary, the users can calculate the theoretical correction factors to account for changes in volume of the unit cells for austenite and ferrite resulting from vari...

  1. Nanowire Photovoltaic Devices

    Science.gov (United States)

    Forbes, David

    2015-01-01

    Firefly Technologies, in collaboration with the Rochester Institute of Technology and the University of Wisconsin-Madison, developed synthesis methods for highly strained nanowires. Two synthesis routes resulted in successful nanowire epitaxy: direct nucleation and growth on the substrate and a novel selective-epitaxy route based on nanolithography using diblock copolymers. The indium-arsenide (InAs) nanowires are implemented in situ within the epitaxy environment-a significant innovation relative to conventional semiconductor nanowire generation using ex situ gold nanoparticles. The introduction of these nanoscale features may enable an intermediate band solar cell while simultaneously increasing the effective absorption volume that can otherwise limit short-circuit current generated by thin quantized layers. The use of nanowires for photovoltaics decouples the absorption process from the current extraction process by virtue of the high aspect ratio. While no functional solar cells resulted from this effort, considerable fundamental understanding of the nanowire epitaxy kinetics and nanopatterning process was developed. This approach could, in principle, be an enabling technology for heterointegration of dissimilar materials. The technology also is applicable to virtual substrates. Incorporating nanowires onto a recrystallized germanium/metal foil substrate would potentially solve the problem of grain boundary shunting of generated carriers by restricting the cross-sectional area of the nanowire (tens of nanometers in diameter) to sizes smaller than the recrystallized grains (0.5 to 1 micron(exp 2).

  2. Metallic nanowire networks

    Science.gov (United States)

    Song, Yujiang; Shelnutt, John A.

    2012-11-06

    A metallic nanowire network synthesized using chemical reduction of a metal ion source by a reducing agent in the presence of a soft template comprising a tubular inverse micellar network. The network of interconnected polycrystalline nanowires has a very high surface-area/volume ratio, which makes it highly suitable for use in catalytic applications.

  3. Heat Conductance is Strongly Anisotropic for Pristine Silicon Nanowires

    DEFF Research Database (Denmark)

    Markussen, Troels; Jauho, Antti-Pekka; Brandbyge, Mads

    2008-01-01

    We compute atomistically the heat conductance for ultrathin pristine silicon nanowires (SiNWs) with diameters ranging from 1 to 5 nm. The room temperature thermal conductance is found to be highly anisotropic: wires oriented along the 110 direction have 50−75% larger conductance than wires orient...... instead use the Tersoff empirical potential model (TEP). For the smallest wires, the thermal conductances obtained from DFT and TEP calculations agree within 10%. The presented results could be relevant for future phonon-engineering of nanowire devices....

  4. Position control of self-catalyzed MBE-grown GaAs nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Bauer, Benedikt; Rudolph, Andreas; Weiss, Dieter; Schuh, Dieter; Soda, Marcello; Zweck, Josef; Reiger, Elisabeth [Institut fuer Experimentelle und Angewandte Physik, Universitaet Regensburg (Germany); Fontcuberta i Morral, Anna [Institut des Materiaux, EPFL Lausanne (Switzerland)

    2010-07-01

    Nanowires grown in bottom-up processes are regarded as possible building blocks of future electronic devices. For integrating them into conventional electronic circuits controlling the position and diameter of the nanowires is inevitable. We report on position controlled GaAs nanowires grown via self-catalyzed growth using MBE. Starting with a GaAs (111)B substrate covered by a thin SiO{sub 2} layer we use E-beam lithography in combination with wet chemical etching to define arrays of holes with diameters of 100 nm and varying interhole distances between 200 and 2000 nm. These holes in the SiO{sub 2} layer act as nucleation sites for nanowire growth. The nanowires are oriented in the [111] direction and are restricted to the patterned areas. SEM/TEM characterizations show that the nanowires have a hexagonal shape with {l_brace}110{r_brace} side facets and zinc blende as dominant crystal structure.

  5. Nanowire Growth for Photovoltaics

    DEFF Research Database (Denmark)

    Holm, Jeppe Vilstrup

    the small footprint of grown nanowires relaxes the crystal matching constraint. 1.7eV is the ideal bandgap for a top junction in a dual junction solar cell, where silicon is the bottom junction. This can be obtained with GaAs0.8P0.2. We have demonstrated how to incorporate phosphorous(P) into Ga......-catalyzed nanowire growth, and grown GaAs1−xPx nanowires with different inclusions of P(x) directly on silicon. The incorporation of P was generally higher in nanowires than for planar growth at identical P flux percentage. More interestingly, the percentage of P in the nanowire was found to be a concave function...

  6. Novel heterostructured Ge nanowires based on polytype transformation.

    Science.gov (United States)

    Vincent, Laetitia; Patriarche, Gilles; Hallais, Géraldine; Renard, Charles; Gardès, Cyrille; Troadec, David; Bouchier, Daniel

    2014-08-13

    We report on a strain-induced phase transformation in Ge nanowires under external shear stresses. The resulted polytype heterostructure may have great potential for photonics and thermoelectric applications. ⟨111⟩-oriented Ge nanowires with standard diamond structure (3C) undergo a phase transformation toward the hexagonal diamond phase referred as the 2H-allotrope. The phase transformation occurs heterogeneously on shear bands along the length of the nanowire. The structure meets the common phenomenological criteria of a martensitic phase transformation. This point is discussed to initiate an on going debate on the transformation mechanisms. The process results in unprecedented quasiperiodic heterostructures 3C/2H along the Ge nanowire. The thermal stability of those 2H domains is also studied under annealing up to 650 °C by in situ TEM.

  7. Field Emission of ITO-Coated Vertically Aligned Nanowire Array.

    KAUST Repository

    Lee, Changhwa

    2010-04-29

    An indium tin oxide (ITO)-coated vertically aligned nanowire array is fabricated, and the field emission characteristics of the nanowire array are investigated. An array of vertically aligned nanowires is considered an ideal structure for a field emitter because of its parallel orientation to the applied electric field. In this letter, a vertically aligned nanowire array is fabricated by modified conventional UV lithography and coated with 0.1-μm-thick ITO. The turn-on electric field intensity is about 2.0 V/μm, and the field enhancement factor, β, is approximately 3,078 when the gap for field emission is 0.6 μm, as measured with a nanomanipulator in a scanning electron microscope.

  8. 2D and 3D ordered arrays of Co magnetic nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, J. [Departamento de Física, Universidad de Oviedo, Calvo Sotelo s/n, 33007 Oviedo, Asturias (Spain); Prida, V.M., E-mail: vmpp@uniovi.es [Departamento de Física, Universidad de Oviedo, Calvo Sotelo s/n, 33007 Oviedo, Asturias (Spain); Vega, V. [Departamento de Física, Universidad de Oviedo, Calvo Sotelo s/n, 33007 Oviedo, Asturias (Spain); Rosa, W.O. [Centro Brasileiro de Pesquisas Físicas, Rua Dr. Xavier Sigaud, 150 Urca., 22290-180 Rio de Janeiro, RJ (Brazil); Caballero-Flores, R.; Iglesias, L.; Hernando, B. [Departamento de Física, Universidad de Oviedo, Calvo Sotelo s/n, 33007 Oviedo, Asturias (Spain)

    2015-06-01

    Cobalt nanowire arrays spatially distributed in 2D and 3D arrangements have been performed by pulsed electrodeposition into the pores of planar and cylindrical nanoporous anodic alumina membranes, respectively. Morphological characterization points out the good filling factor reached by electroplated Co nanowires in both kinds of alumina membranes exhibiting hexagonally self-ordered porous structures. Co nanowires grown in both kinds of alumina templates exhibit the same crystalline phases. DC magnetometry and First Order Reversal Curve (FORC) analysis were carried out in order to determine the overall magnetic behavior for both nanowire array geometries. It is found that when the Co nanowires of two kinds of arrays are perpendicularly magnetized, both hysteresis loops are identical, suggesting that neither the intrinsic magnetic behavior of the nanowires nor the collective one depend on the arrays geometry. FORC analysis performed along the radial direction of the Co nanowire arrays embedded in the cylindrical alumina template reveals that the contribution of each nanowire to the magnetization reversal process involves its specific orientation with respect to the applied field direction. Furthermore, the comparison between the magnetic properties for both kinds of Co nanowire arrays allows discussing about the effect of the cylindrical geometry of the template on the magnetostatic interaction among nanowires. - Graphical abstract: Scanning electronic microscope images of cylindrical anodic aluminum membranes (CAAM) electrodeposited with Co nanowires. From top, SEM micrographs of the nanoporous CAAM template at different magnifications, to bottom at the left, a cross-section image showing Co nanowires embedded in the nanopores of the alumina template. On the right at the bottom are shown the radial and axial hysteresis loops together FORC diagram obtained for the Co nanowires array along the radial direction of the CAAM template. - Highlights: • Co nanowire

  9. Rare earth silicide nanowires on silicon surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Wanke, Martina

    2008-11-10

    of the sample surface, which are oriented in the same direction as the average substrate surface. These thin nanowires show a one-dimensional halfmetallic electronic structure. At higher coverage broad nanowires are grown on the (111) facets as disilicide monolayer nanowires. They show the for the 1 x 1 monolayer reconstruction typical scharp edges along the {l_brace}1 anti 10{r_brace} directions. The electronic structure shows all states, which occur at a disilicide monolayer on the planar Si(111), with a two-dimensional metallic band structure. At a further increase of the coverage similar nanowires arise with rounder end pieces, which can be assigned a coverage with a disilicide multilayer on the (111) facets. (orig.)

  10. Effect of oriental medicine music therapy on patients with Hwa-byung: a study protocol for a randomized controlled trial.

    Science.gov (United States)

    Park, Jeong-Su; Park, Sunju; Cheon, Chun-Hoo; Jang, Bo-Hyoung; Lee, Song-Hee; Lee, Seung-Hyun; Chung, Sun-Yong; Kim, Jong-Woo; Jeon, Chan-Yong; Park, Jong-Hyeong; Shin, Yong-Cheol; Ko, Seong-Gyu

    2012-09-11

    Hwa-byung, a Korean culture-bound syndrome with both psychological and somatic symptoms, is also known as 'anger syndrome'. It includes various physical symptoms including anxiety, a feeling of overheating, a sensation of pressure on the chest, heart palpitations, respiratory stuffiness, insomnia, and anxiety. The proposed study is a single-center, double-blind, randomized, controlled trial with two parallel arms: an oriental medicine music therapy (OMMT) group and a control music therapy (CMT) group. In total, 48 patients will be enrolled into the trial. The first visit will be the screening visit. At baseline (visit 2), all participants fulfilling both the inclusion and the exclusion criteria will be split and randomly divided into two equal groups: the OMMT and the CMT (n = 24 each). Each group will receive treatment sessions over the course of 4 weeks, twice per week, for eight sessions in total. The primary outcome is the State-Trait Anxiety Inventory (STAI), and the secondary outcomes are the Hwa-byung scale (H-scale), the Center for Epidemiologic Studies Depression Scale (CES-D), the Hwa-byung visual analogue scale (H-VAS) for primary symptoms, the World Health Organization Quality of Life scale, brief version (WHOQOL-BREF), and levels of salivary cortisol. Patients will be asked to complete questionnaires at the baseline visit (visit 2), after the last treatment session (visit 9), and at 4 weeks after the end of all trial sessions (visit 10). From the baseline (visit 2) through the follow-up (visit 10), the entire process will take a total of 53 days. This proposed study targets patients with Hwa-byung, especially those who have exhibited symptoms of anxiety. Therefore, the primary outcome is set to measure the level of anxiety. OMMT is music therapy combined with traditional Korean medicinal theories. Unlike previously reported music therapies, for which patients simply listen to music passively, in OMMT, patients actively move their bodies and play the

  11. Effect of oriental medicine music therapy on patients with Hwa-byung: a study protocol for a randomized controlled trial

    Science.gov (United States)

    2012-01-01

    Background Hwa-byung, a Korean culture-bound syndrome with both psychological and somatic symptoms, is also known as ‘anger syndrome’. It includes various physical symptoms including anxiety, a feeling of overheating, a sensation of pressure on the chest, heart palpitations, respiratory stuffiness, insomnia, and anxiety. Methods/design The proposed study is a single-center, double-blind, randomized, controlled trial with two parallel arms: an oriental medicine music therapy (OMMT) group and a control music therapy (CMT) group. In total, 48 patients will be enrolled into the trial. The first visit will be the screening visit. At baseline (visit 2), all participants fulfilling both the inclusion and the exclusion criteria will be split and randomly divided into two equal groups: the OMMT and the CMT (n = 24 each). Each group will receive treatment sessions over the course of 4 weeks, twice per week, for eight sessions in total. The primary outcome is the State-Trait Anxiety Inventory (STAI), and the secondary outcomes are the Hwa-byung scale (H-scale), the Center for Epidemiologic Studies Depression Scale (CES-D), the Hwa-byung visual analogue scale (H-VAS) for primary symptoms, the World Health Organization Quality of Life scale, brief version (WHOQOL-BREF), and levels of salivary cortisol. Patients will be asked to complete questionnaires at the baseline visit (visit 2), after the last treatment session (visit 9), and at 4 weeks after the end of all trial sessions (visit 10). From the baseline (visit 2) through the follow-up (visit 10), the entire process will take a total of 53 days. Discussion This proposed study targets patients with Hwa-byung, especially those who have exhibited symptoms of anxiety. Therefore, the primary outcome is set to measure the level of anxiety. OMMT is music therapy combined with traditional Korean medicinal theories. Unlike previously reported music therapies, for which patients simply listen to music passively, in OMMT, patients

  12. Effect of oriental medicine music therapy on patients with Hwa-byung: a study protocol for a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Park Jeong-Su

    2012-09-01

    Full Text Available Abstract Background Hwa-byung, a Korean culture-bound syndrome with both psychological and somatic symptoms, is also known as ‘anger syndrome’. It includes various physical symptoms including anxiety, a feeling of overheating, a sensation of pressure on the chest, heart palpitations, respiratory stuffiness, insomnia, and anxiety. Methods/design The proposed study is a single-center, double-blind, randomized, controlled trial with two parallel arms: an oriental medicine music therapy (OMMT group and a control music therapy (CMT group. In total, 48 patients will be enrolled into the trial. The first visit will be the screening visit. At baseline (visit 2, all participants fulfilling both the inclusion and the exclusion criteria will be split and randomly divided into two equal groups: the OMMT and the CMT (n = 24 each. Each group will receive treatment sessions over the course of 4 weeks, twice per week, for eight sessions in total. The primary outcome is the State-Trait Anxiety Inventory (STAI, and the secondary outcomes are the Hwa-byung scale (H-scale, the Center for Epidemiologic Studies Depression Scale (CES-D, the Hwa-byung visual analogue scale (H-VAS for primary symptoms, the World Health Organization Quality of Life scale, brief version (WHOQOL-BREF, and levels of salivary cortisol. Patients will be asked to complete questionnaires at the baseline visit (visit 2, after the last treatment session (visit 9, and at 4 weeks after the end of all trial sessions (visit 10. From the baseline (visit 2 through the follow-up (visit 10, the entire process will take a total of 53 days. Discussion This proposed study targets patients with Hwa-byung, especially those who have exhibited symptoms of anxiety. Therefore, the primary outcome is set to measure the level of anxiety. OMMT is music therapy combined with traditional Korean medicinal theories. Unlike previously reported music therapies, for which patients simply listen to music passively, in

  13. Nanowire Growth for Photovoltaics

    DEFF Research Database (Denmark)

    Holm, Jeppe Vilstrup

    cells. Resonance effects between the light and nanowire causes an inherent concentration of the sunlight into the nanowires, and means that a sparse array of nanowires (less than 5% of the area) can absorb all the incoming light. The resonance effects, as well as a graded index of refraction, also traps...... of the percentage of P in the flux, while for planar growth it was a convex function. We have demonstrated GaAs0.8P0.2 nanowires and further grown a shell surrounding the core with the same composition. The lattice matched GaAsP core-shell nanowire were doped to produce radial p-i-n junctions in each...... of the nanowires, some of which were removed from their growth substrate and turned into single nanowire solar cells (SNWSC). The best device showed a conversion efficiency of 6.8% under 1.5AMG 1-sun illumination. In order to improve the efficiency a surface passivating shell consisting of highly doped, wide...

  14. Nanowire-based thermoelectrics

    Science.gov (United States)

    Ali, Azhar; Chen, Yixi; Vasiraju, Venkata; Vaddiraju, Sreeram

    2017-07-01

    Research on thermoelectrics has seen a huge resurgence since the early 1990s. The ability of tuning a material’s electrical and thermal transport behavior upon nanostructuring has led to this revival. Nevertheless, thermoelectric performances of nanowires and related materials lag far behind those achieved with thin-film superlattices and quantum dot-based materials. This is despite the fact that nanowires offer many distinct advantages in enhancing the thermoelectric performances of materials. The simplicity of the strategy is the first and foremost advantage. For example, control of the nanowire diameters and their surface roughnesses will aid in enhancing their thermoelectric performances. Another major advantage is the possibility of obtaining high thermoelectric performances using simpler nanowire chemistries (e.g., elemental and binary compound semiconductors), paving the way for the fabrication of thermoelectric modules inexpensively from non-toxic elements. In this context, the topical review provides an overview of the current state of nanowire-based thermoelectrics. It concludes with a discussion of the future vision of nanowire-based thermoelectrics, including the need for developing strategies aimed at the mass production of nanowires and their interface-engineered assembly into devices. This eliminates the need for trial-and-error strategies and complex chemistries for enhancing the thermoelectric performances of materials.

  15. The Influence of Coping-oriented Hypnotic Suggestions on Chronic Pain in Patients with Spinal Cord Injury (SCI): A Randomized Controlled Study

    DEFF Research Database (Denmark)

    Knudsen, Lone; Kjøgx, Heidi; Kasch, Helge

    Background and aims: Coping-oriented hypnotic suggestions aimed at reducing pain catastrophizing have been shown to reduce pain in people with chronic tension-type headache and experimental pain in healthy volunteers during hypnosis (Kjøgx et al., 2016). However, the effect on pain post-hypnosis...... is unknown. The aim is to investigate the effect of coping-oriented hypnotic suggestions on chronic pain post-hypnosis. Methods: Seventy-five SCI-patients with chronic pain (>3, NRS 0-10) are randomized into one of three conditions; 1) coping-oriented hypnosis plus current treatment, 2) neutral hypnosis plus...... Strategies Questionnaire), pain catastrophizing (Pain Catastrophizing Scale), anxiety and depression (Hospital Anxiety and Depression Scale). Patients’ global impression of change and side effects of the hypnosis are also assessed for 14 days post-intervention. Results: Preliminary results will be presented...

  16. Magnetic and structural properties of Fe-Co nanowires fabricated by matrix synthesis in the pores of track membranes

    Science.gov (United States)

    Frolov, K. V.; Zagorskii, D. L.; Lyubutin, I. S.; Chuev, M. A.; Perunov, I. V.; Bedin, S. A.; Lomov, A. A.; Artemov, V. V.; Sulyanov, S. N.

    2017-03-01

    Fe1- x Co x nanowires are obtained by electrochemical deposition into the pores of track-etched membranes. The characteristics of the growth process that allow controlling the length and aspect ratio of the nanowires are established. The elemental composition and magnetic properties of the nanowires depend on the diameter of the track-etched pores, which varies from 30 to 200 nm, and the electrochemical potential U (650-850 mV), which determines the nanowire growth rate. According to the results of elemental analysis and the Mössbauer spectroscopy data, the Co content in Fe1- x Co x lies in the range of x=0.20-0.25. It is found that the orientation of the magnetic moment of Fe-Co nanoparticles in the wires depends both on the track pore size d and on the nanowire growth rate. Thus, the magnetic moments in nanowires grown in 50-nm-diameter pores are oriented within 0°-40° with respect to the nanowire axis. The magnetic properties of the nanowires are explained in the framework of a theoretical model describing the magnetic dynamics of nanocomposites, which was extended to include the relaxation of the magnetization vector and to take into account interaction between the particles. The key physical parameters important for the technological applications of the nanowires are determined, their dependence on the nanowire growth conditions is traced, and the possibility of controlling them is established.

  17. Silicon nanowire hybrid photovoltaics

    KAUST Repository

    Garnett, Erik C.

    2010-06-01

    Silicon nanowire Schottky junction solar cells have been fabricated using n-type silicon nanowire arrays and a spin-coated conductive polymer (PEDOT). The polymer Schottky junction cells show superior surface passivation and open-circuit voltages compared to standard diffused junction cells with native oxide surfaces. External quantum efficiencies up to 88% were measured for these silicon nanowire/PEDOT solar cells further demonstrating excellent surface passivation. This process avoids high temperature processes which allows for low-cost substrates to be used. © 2010 IEEE.

  18. Core stability exercise is as effective as task-oriented motor training in improving motor proficiency in children with developmental coordination disorder: a randomized controlled pilot study.

    Science.gov (United States)

    Au, Mei K; Chan, Wai M; Lee, Lin; Chen, Tracy Mk; Chau, Rosanna Mw; Pang, Marco Yc

    2014-10-01

    To compare the effectiveness of a core stability program with a task-oriented motor training program in improving motor proficiency in children with developmental coordination disorder (DCD). Randomized controlled pilot trial. Outpatient unit in a hospital. Twenty-two children diagnosed with DCD aged 6-9 years were randomly allocated to the core stability program or the task-oriented motor program. Both groups underwent their respective face-to-face training session once per week for eight consecutive weeks. They were also instructed to carry out home exercises on a daily basis during the intervention period. Short Form of the Bruininks-Oseretsky Test of Motor Proficiency (Second Edition) and Sensory Organization Test at pre- and post-intervention. Intention-to-treat analysis revealed no significant between-group difference in the change of motor proficiency standard score (P=0.717), and composite equilibrium score derived from the Sensory Organization Test (P=0.100). Further analysis showed significant improvement in motor proficiency in both the core stability (mean change (SD)=6.3(5.4); p=0.008) and task-oriented training groups (mean change(SD)=5.1(4.0); P=0.007). The composite equilibrium score was significantly increased in the task-oriented training group (mean change (SD)=6.0(5.5); P=0.009), but not in the core stability group (mean change(SD) =0.0(9.6); P=0.812). In the task-oriented training group, compliance with the home program was positively correlated with change in motor proficiency (ρ=0.680, P=0.030) and composite equilibrium score (ρ=0.638, P=0.047). The core stability exercise program is as effective as task-oriented training in improving motor proficiency among children with DCD. © The Author(s) 2014.

  19. Omitted data in randomized controlled trials for anxiety and depression: A systematic review of the inclusion of sexual orientation and gender identity.

    Science.gov (United States)

    Heck, Nicholas C; Mirabito, Lucas A; LeMaire, Kelly; Livingston, Nicholas A; Flentje, Annesa

    2017-01-01

    The current study examined the frequency with which randomized controlled trials (RCTs) of behavioral and psychological interventions for anxiety and depression include data pertaining to participant sexual orientation and nonbinary gender identities. Using systematic review methodology, the databases PubMed and PsycINFO were searched to identify RCTs published in 2004, 2009, and 2014. Random selections of 400 articles per database per year (2,400 articles in total) were considered for inclusion in the review. Articles meeting inclusion criteria were read and coded by the research team to identify whether the trial reported data pertaining to participant sexual orientation and nonbinary gender identities. Additional trial characteristics were also identified and indexed in our database (e.g., sample size, funding source). Of the 232 articles meeting inclusion criteria, only 1 reported participants' sexual orientation, and zero articles included nonbinary gender identities. A total of 52,769 participants were represented in the trials, 93 of which were conducted in the United States, and 43 acknowledged the National Institutes of Health as a source of funding. Despite known mental health disparities on the basis of sexual orientation and nonbinary gender identification, researchers evaluating interventions for anxiety and depression are not reporting on these important demographic characteristics. Reporting practices must change to ensure that our interventions generalize to lesbian, gay, bisexual, and transgender persons. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  20. Effects of task-oriented robot training on arm function, activity, and quality of life in chronic stroke patients: a randomized controlled trial.

    Science.gov (United States)

    Timmermans, Annick A A; Lemmens, Ryanne J M; Monfrance, Maurice; Geers, Richard P J; Bakx, Wilbert; Smeets, Rob J E M; Seelen, Henk A M

    2014-03-31

    Over fifty percent of stroke patients experience chronic arm hand performance problems, compromising independence in daily life activities and quality of life. Task-oriented training may improve arm hand performance after stroke, whereby augmented therapy may lead to a better treatment outcome. Technology-supported training holds opportunities for increasing training intensity. However, the effects of robot-supported task-oriented training with real life objects in stroke patients are not known to date. The aim of the present study was to investigate the effectiveness and added value of the Haptic Master robot combined with task-oriented arm hand training in chronic stroke patients. In a single-blind randomized controlled trial, 22 chronic stroke patients were randomly allocated to receive either task-oriented robot-assisted arm-hand training (experimental group) or task-oriented non-robotic arm-hand training (control group). For training, the T-TOAT (Technology-supported Task-Oriented Arm Training) method was applied. Training was provided during 8 weeks, 4 times/week, 2 × 30 min/day. A significant improvement after training on the Action Research Arm Test (ARAT) was demonstrated in the experimental group (p = 0.008). Results were maintained until 6 months after cessation of the training. On the perceived performance measure (Motor Activity Log (MAL)), both, the experimental and control group improved significantly after training (control group p = 0.008; experimental group p = 0.013). The improvements on MAL in both groups were maintained until 6 months after cessation of the training. With regard to quality of life, only in the control group a significant improvement after training was found (EuroQol-5D p = 0.015, SF-36 physical p = 0.01). However, the improvement on SF-36 in the control group was not maintained (p = 0.012). No between-group differences could be demonstrated on any of the outcome measures. Arm hand performance improved in chronic stroke

  1. Elastic properties and electron transport in InAs nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Migunov, Vadim

    2013-02-22

    The electron transport and elastic properties of InAs nanowires grown by chemical vapor deposition on InAs (001) substrate were studied experimentally, in-situ in a transmission electron microscope (TEM). A TEM holder allowing the measurement of a nanoforce while simultaneous imaging nanowire bending was used. Diffraction images from local areas of the wire were recorded to correlate elastic properties with the atomic structure of the nanowires. Another TEM holder allowing the application of electrical bias between the nanowire and an apex of a metallic needle while simultaneous imaging the nanowire in TEM or performing electron holography was used to detect mechanical vibrations in mechanical study or holographical observation of the nanowire inner potential in the electron transport studies. The combination of the scanning probe methods with TEM allows to correlate the measured electric and elastic properties of the nanowires with direct identification of their atomic structure. It was found that the nanowires have different atomic structures and different stacking fault defect densities that impacts critically on the elastic properties and electric transport. The unique methods, that were applied in this work, allowed to obtain dependencies of resistivity and Young's modulus of left angle 111 right angle -oriented InAs nanowires on defect density and diameter. It was found that the higher is the defect density the higher are the resistivity and the Young's modulus. Regarding the resistivity, it was deduced that the stacking faults increase the scattering of the electrons in the nanowire. These findings are consistent with the literature, however, the effect described by the other groups is not so pronounced. This difference can be attributed to the significant incompleteness of the physical models used for the data analysis. Regarding the elastic modulus, there are several mechanisms affecting the elasticity of the nanowires discussed in the thesis. It

  2. Flexible electronics-compatible non-enzymatic glucose sensing via transparent CuO nanowire networks on PET films

    Science.gov (United States)

    Bell, Caroline; Nammari, Abdullah; Uttamchandani, Pranay; Rai, Amit; Shah, Pujan; Moore, Arden L.

    2017-06-01

    Diabetic individuals need simple, accurate, and cost effective means by which to independently assess their glucose levels in a non-invasive way. In this work, a sensor based on randomly oriented CuO nanowire networks supported by a polyethylene terephthalate thin film is evaluated as a flexible, transparent, non-enzymatic glucose sensing system analogous to those envisioned for future wearable diagnostic devices. The amperometric sensing characteristics of this type of device architecture are evaluated both before and after bending, with the system’s glucose response, sensitivity, lower limit of detection, and effect of applied bias being experimentally determined. The obtained data shows that the sensor is capable of measuring changes in glucose levels within a physiologically relevant range (0-12 mM glucose) and at lower limits of detection (0.05 mM glucose at +0.6 V bias) consistent with patient tears and saliva. Unlike existing studies utilizing a conductive backing layer or macroscopic electrode setup, this sensor demonstrates a percolation network-like trend of current versus glucose concentration. In this implementation, controlling the architectural details of the CuO nanowire network could conceivably allow the sensor’s sensitivity and optimal sensing range to be tuned. Overall, this work shows that integrating CuO nanowires into a sensor architecture compatible with transparent, flexible electronics is a promising avenue to realizing next generation wearable non-enzymatic glucose diagnostic devices.

  3. Topotaxial growth of α-Fe{sub 2}O{sub 3} nanowires on iron substrate

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, Himanshu, E-mail: himsri@rrcat.gov.in; Srivastava, A. K.; Babu, Mahendra; Rai, S. K.; Ganguli, Tapas [Indus Synchrotrons Utilization Division, Raja Ramanna Centre for Advanced Technology, Indore-452013 (India)

    2016-05-23

    α-Fe{sub 2}O{sub 3} (hematite) nanowires have been grown by simple thermal oxidation of iron foil at 700°C in a moist oxygen flow. It was observed that the growth of nanowires highly depends on the texture of the iron substrate, in particular the presence of [110] oriented iron grains. Cross-sectional Transmission Electron Microscopy (TEM) investigation of as-grown sample revealed that the growth of nanowires has definite orientation relation with the underlying oxide grains Fe{sub 3}O{sub 4} (magnetite) and FeO (wustite), which can be interpreted by the primary orientation relationships of topotaxial growth of iron oxides. The observation can pave the way for patterning of the nanowire growth by controlling the texture of original substrate. Samples were also characterized with Scanning Electron Microscope (SEM) and X-ray diffraction (XRD).

  4. Controlling the Coupling of a Single Nitrogen Vacancy Center to a Silver Nanowire

    DEFF Research Database (Denmark)

    Huck, Alexander; Kumar, Shailesh; Shakoor, Abdul

    2011-01-01

    -linear interaction at the level of a few photons. In our contribution we demonstrate the controlled coupling of a single nitrogen vacancy (NV) center in a diamond nano crystal to a nanowire made of silver. This is in contrast to previous realizations, where the nanowire dipole system was assembled randomly. Ultimate...

  5. Porous Silicon Nanowires

    Science.gov (United States)

    Qu, Yongquan; Zhou, Hailong; Duan, Xiangfeng

    2011-01-01

    In this minreview, we summarize recent progress in the synthesis, properties and applications of a new type of one-dimensional nanostructures — single crystalline porous silicon nanowires. The growth of porous silicon nanowires starting from both p- and n-type Si wafers with a variety of dopant concentrations can be achieved through either one-step or two-step reactions. The mechanistic studies indicate the dopant concentration of Si wafers, oxidizer concentration, etching time and temperature can affect the morphology of the as-etched silicon nanowires. The porous silicon nanowires are both optically and electronically active and have been explored for potential applications in diverse areas including photocatalysis, lithium ion battery, gas sensor and drug delivery. PMID:21869999

  6. Ballistic Majorana nanowire devices

    NARCIS (Netherlands)

    Gül, Önder

    2017-01-01

    The dissertation reports a series of electron transport experiments on semiconductor nanowires towards realizing the hypothesized topological quantum computation. A topological quantum computer manipulates information that is stored nonlocally in the topology of a physical system. Such an operation

  7. Biofunctionalized Magnetic Nanowires

    KAUST Repository

    Kosel, Jurgen

    2013-12-19

    Magnetic nanowires can be used as an alternative method overcoming the limitations of current cancer treatments that lack specificity and are highly cytotoxic. Nanowires are developed so that they selectively attach to cancer cells via antibodies, potentially destroying them when a magnetic field induces their vibration. This will transmit a mechanical force to the targeted cells, which is expected to induce apoptosis on the cancer cells.

  8. A Grazing-Incidence Small-Angle X-Ray Scattering View of Vertically Aligned ZnO Nanowires

    Directory of Open Access Journals (Sweden)

    M. Lučić Lavčević

    2013-01-01

    Full Text Available We report a grazing-incidence small-angle X-ray scattering study of ZnO films with vertically aligned and randomly distributed nanowires, grown through a hydrothermal growth process on nanostructured ZnO seeding coatings and deposited by electron beam evaporation on silicon and glass, respectively. The comparison of the scattering patterns of seeding coatings and nanowires showed that the scattering of vertically aligned nanowires exhibited a specific feature: the dominant characteristic of their scattering patterns is the appearance of fine structure effects around the specular peak. These effects were clarified by the combined reflection and scattering phenomena, suggested for the aligned nanowires-substrate system. Furthermore, they enabled the calculation of the average gyration radius of nanowires in horizontal direction. The calculated value was in good agreement with the radii of nanowires estimated by surface electron microscopy. Therefore, the observed feature in the scattering pattern can serve as evidence of the aligned growth of nanowires.

  9. Cleaved-Coupled Nanowire Lasers

    Science.gov (United States)

    2013-01-15

    fabricated with micrometer -scale gaps (26, 27). This Fig. 1. Single-frequency lasing in 9-μm (4:3) cleaved-coupled nanowires. (A) SEM images showing the...modulation of modes observed in cleaved-coupled nanowire lasers can be predicted using transfer matrix methods. Although the Vernier effect provides an...Following the Vernier effect, coupled nanowires with integer ratios would produce the free spectral range of the shorter nanowire. The lasing spectra

  10. Perspectives: Nanofibers and nanowires for disordered photonics

    Directory of Open Access Journals (Sweden)

    Dario Pisignano

    2017-03-01

    Full Text Available As building blocks of microscopically non-homogeneous materials, semiconductor nanowires and polymer nanofibers are emerging component materials for disordered photonics, with unique properties of light emission and scattering. Effects found in assemblies of nanowires and nanofibers include broadband reflection, significant localization of light, strong and collective multiple scattering, enhanced absorption of incident photons, synergistic effects with plasmonic particles, and random lasing. We highlight recent related discoveries, with a focus on material aspects. The control of spatial correlations in complex assemblies during deposition, the coupling of modes with efficient transmission channels provided by nanofiber waveguides, and the embedment of random architectures into individually coded nanowires will allow the potential of these photonic materials to be fully exploited, unconventional physics to be highlighted, and next-generation optical devices to be achieved. The prospects opened by this technology include enhanced random lasing and mode-locking, multi-directionally guided coupling to sensors and receivers, and low-cost encrypting miniatures for encoders and labels.

  11. Perspectives: Nanofibers and nanowires for disordered photonics

    Science.gov (United States)

    Pisignano, Dario; Persano, Luana; Camposeo, Andrea

    2017-03-01

    As building blocks of microscopically non-homogeneous materials, semiconductor nanowires and polymer nanofibers are emerging component materials for disordered photonics, with unique properties of light emission and scattering. Effects found in assemblies of nanowires and nanofibers include broadband reflection, significant localization of light, strong and collective multiple scattering, enhanced absorption of incident photons, synergistic effects with plasmonic particles, and random lasing. We highlight recent related discoveries, with a focus on material aspects. The control of spatial correlations in complex assemblies during deposition, the coupling of modes with efficient transmission channels provided by nanofiber waveguides, and the embedment of random architectures into individually coded nanowires will allow the potential of these photonic materials to be fully exploited, unconventional physics to be highlighted, and next-generation optical devices to be achieved. The prospects opened by this technology include enhanced random lasing and mode-locking, multi-directionally guided coupling to sensors and receivers, and low-cost encrypting miniatures for encoders and labels.

  12. P-Cu2O/n-ZnO nanowires on ITO glass for solar cells.

    Science.gov (United States)

    Zhang, Jin; Que, Wenxiu; Zhong, Peng; Zhu, Gangqiang

    2010-11-01

    In this paper, the fabrication and characterization of a heterojunction solar cell based on p-Cu2O/n-ZnO nanowires on ITO glass are presented. ZnO aligned nanocrystal seed layer is firstly prepared by RF magnetron sputtering technique, and then vertical ZnO nanowire arrays with an acicular crystal structure are obtained by using a chemical bath deposition processing. The results indicate that the ZnO nanowires with a diameter of about 50 nm and 500 nm in length can be easily obtained. The absorption and transmittance of the ZnO nanowires are studied. It is also noted that the Cu2O can fill well into the space between ZnO nanowires by an electrodeposition process. Furthermore, the effect of the Cu2O orientation on the cell performance is also presented.

  13. Nanowire mesh solar fuels generator

    Science.gov (United States)

    Yang, Peidong; Chan, Candace; Sun, Jianwei; Liu, Bin

    2016-05-24

    This disclosure provides systems, methods, and apparatus related to a nanowire mesh solar fuels generator. In one aspect, a nanowire mesh solar fuels generator includes (1) a photoanode configured to perform water oxidation and (2) a photocathode configured to perform water reduction. The photocathode is in electrical contact with the photoanode. The photoanode may include a high surface area network of photoanode nanowires. The photocathode may include a high surface area network of photocathode nanowires. In some embodiments, the nanowire mesh solar fuels generator may include an ion conductive polymer infiltrating the photoanode and the photocathode in the region where the photocathode is in electrical contact with the photoanode.

  14. The Mechanical Properties of Nanowires

    Science.gov (United States)

    Wang, Shiliang; Shan, Zhiwei

    2017-01-01

    Applications of nanowires into future generation nanodevices require a complete understanding of the mechanical properties of the nanowires. A great research effort has been made in the past two decades to understand the deformation physics and mechanical behaviors of nanowires, and to interpret the discrepancies between experimental measurements and theoretical predictions. This review focused on the characterization and understanding of the mechanical properties of nanowires, including elasticity, plasticity, anelasticity and strength. As the results from the previous literature in this area appear inconsistent, a critical evaluation of the characterization techniques and methodologies were presented. In particular, the size effects of nanowires on the mechanical properties and their deformation mechanisms were discussed. PMID:28435775

  15. Economic evaluation of schema therapy and clarification-oriented psychotherapy for personality disorders: A multicenter, randomized controlled trial

    NARCIS (Netherlands)

    Bamelis, L.L.M.; Arntz, A.; Wetzelaer, P.; Verdoorn, R.; Evers, S.M.A.A.

    2015-01-01

    Purpose: To compare from a societal perspective the cost-effectiveness and cost-utility of schema therapy, clarification-oriented psychotherapy, and treatment as usual for patients with avoidant, dependent, obsessive-compulsive, paranoid, histrionic, and/or narcissistic personality disorder. Method:

  16. Selective formation of tungsten nanowires

    Directory of Open Access Journals (Sweden)

    Bien Daniel

    2011-01-01

    Full Text Available Abstract We report on a process for fabricating self-aligned tungsten (W nanowires with polycrystalline silicon core. Tungsten nanowires as thin as 10 nm were formed by utilizing polysilicon sidewall transfer technology followed by selective deposition of tungsten by chemical vapor deposition (CVD using WF6 as the precursor. With selective CVD, the process is self-limiting whereby the tungsten formation is confined to the polysilicon regions; hence, the nanowires are formed without the need for lithography or for additional processing. The fabricated tungsten nanowires were observed to be perfectly aligned, showing 100% selectivity to polysilicon and can be made to be electrically isolated from one another. The electrical conductivity of the nanowires was characterized to determine the effect of its physical dimensions. The conductivity for the tungsten nanowires were found to be 40% higher when compared to doped polysilicon nanowires of similar dimensions.

  17. Piezoresistive boron doped diamond nanowire

    Energy Technology Data Exchange (ETDEWEB)

    Sumant, Anirudha V.; Wang, Xinpeng

    2017-07-04

    A UNCD nanowire comprises a first end electrically coupled to a first contact pad which is disposed on a substrate. A second end is electrically coupled to a second contact pad also disposed on the substrate. The UNCD nanowire is doped with a dopant and disposed over the substrate. The UNCD nanowire is movable between a first configuration in which no force is exerted on the UNCD nanowire and a second configuration in which the UNCD nanowire bends about the first end and the second end in response to a force. The UNCD nanowire has a first resistance in the first configuration and a second resistance in the second configuration which is different from the first resistance. The UNCD nanowire is structured to have a gauge factor of at least about 70, for example, in the range of about 70 to about 1,800.

  18. Numerical study of electrical transport in co-percolative metal nanowire-graphene thin-films

    Science.gov (United States)

    Gupta, Man Prakash; Kumar, Satish

    2016-11-01

    Nanowires-dispersed polycrystalline graphene has been recently explored as a transparent conducting material for applications such as solar cells, displays, and touch-screens. Metal nanowires and polycrystalline graphene play synergetic roles during the charge transport in the material by compensating for each other's limitations. In the present work, we develop and employ an extensive computational framework to study the essential characteristics of the charge transport not only on an aggregate basis but also on individual constituents' levels in these types of composite thin-films. The method allows the detailed visualization of the percolative current pathways in the material and provides the direct evidence of current crowding in the 1-D nanowires and 2-D polygraphene sheet. The framework is used to study the effects of several important governing parameters such as length, density and orientation of the nanowires, grain density in polygraphene, grain boundary resistance, and the contact resistance between nanowires and graphene. We also present and validate an effective medium theory based generalized analytical model for the composite. The analytical model is in agreement with the simulations, and it successfully predicts the overall conductance as a function of several parameters including the nanowire network density and orientation and graphene grain boundaries. Our findings suggest that the longer nanowires (compared to grain size) with low angle orientation (60 × intra-grain resistance), the overall conductance becomes nearly independent of grain boundary resistance due to nanowires. The developed model can be applied to study other emerging transparent conducting materials such as nanowires, nanotubes, polygraphene, graphene oxide, and their hybrid nanostructures.

  19. Physical Mechanism Behind Enhanced Photoelectrochemical and Photocatalytic Properties of Superhydrophilic Assemblies of 3D-TiO2 Microspheres with Arrays of Oriented, Single-Crystalline TiO2 Nanowires as Building Blocks Deposited on Fluorine-Doped Tin Oxide.

    Science.gov (United States)

    Sadhu, Subha; Gupta, Preeti; Poddar, Pankaj

    2017-03-29

    In comparison to the one-dimensional (1D) semiconductor nanostructures, the hierarchical, three-dimensional (3D) microstructures, composed of the arrays of 1D nanostructures as building blocks, show quite unique physicochemical properties due to efficient photon capture and enhanced surface to volume ratio, which aid in advancing the performance of various optoelectronic devices. In this contribution, we report the fabrication of surfactant-free, radially assembled, 3D titania (rutile-phase) microsphere arrays (3D-TMSAs) composed of bundles of single-crystalline titania nanowires (NWs) directly on fluorine-doped conducting oxide (FTO) substrates with tunable architecture. The effects of growth parameters on the morphology of the 3D-TMSAs have been studied thoroughly. The 3D-TMSAs grown on the FTO-substrate showed superior photon-harvesting owing to the increase in light-scattering. The photocatalytic and photon to electron conversion efficiency of dye-sensitized solar cells (DSSC), where the optimized 3D-TMSAs were used as an anode, showed around 44% increase in the photoconversion efficiency compared to that of Degussa P-25 as a result of the synergistic effect of higher surface area and enhanced photon scattering probability. The TMSA film showed superhydrophilicity without any prior UV irradiation. In addition, the presence of bundles of almost parallel NWs led to the formation of arrays of microcapacitors, which showed stable dielectric performance. The fabrication of single-crystalline, oriented, self-assembled TMSAs with bundles of titania nanowires as their building blocks deposited on transparent conducting oxide (TCO) substrates has vast potential in the area of photoelectrochemical research.

  20. Nanowire templated semihollow bicontinuous graphene scrolls: designed construction, mechanism, and enhanced energy storage performance.

    Science.gov (United States)

    Yan, Mengyu; Wang, Fengchao; Han, Chunhua; Ma, Xinyu; Xu, Xu; An, Qinyou; Xu, Lin; Niu, Chaojiang; Zhao, Yunlong; Tian, Xiaocong; Hu, Ping; Wu, Hengan; Mai, Liqiang

    2013-12-04

    Graphene scrolls have been widely investigated for applications in electronics, sensors, energy storage, etc. However, graphene scrolls with tens of micrometers in length and with other materials in their cavities have not been obtained. Here nanowire templated semihollow bicontinuous graphene scroll architecture is designed and constructed through "oriented assembly" and "self-scroll" strategy. These obtained nanowire templated graphene scrolls can achieve over 30 μm in length with interior cavities between the nanowire and scroll. It is demonstrated through experiments and molecular dynamic simulations that the semihollow bicontinuous structure construction processes depend on the systemic energy, the curvature of nanowires, and the reaction time. Lithium batteries based on V3O7 nanowire templated graphene scrolls (VGSs) exhibit an optimal performance with specific capacity of 321 mAh/g at 100 mA/g and 87.3% capacity retention after 400 cycles at 2000 mA/g. The VGS also shows a high conductivity of 1056 S/m and high capacity of 162 mAh/g at a large density of 3000 mA/g with only 5 wt % graphene added which are 27 and 4.5 times as high as those of V3O7 nanowires, respectively. A supercapacitor made of MnO2 nanowire templated graphene scrolls (MGSs) also shows a high capacity of 317 F/g at 1A/g, which is over 1.5 times than that of MnO2 nanowires without graphene scrolls. These excellent energy storage capacities and cycling performance are attributed to the unique structure of the nanowire templated graphene scroll, which provides continuous electron and ion transfer channels and space for free volume expansion of nanowires during cycling. This strategy and understanding can be used to synthesize other nanowire templated graphene scroll architectures, which can be extended to other fabrication processes and fields.

  1. Effects of Nanowire Length and Surface Roughness on the Electrochemical Sensor Properties of Nafion-Free, Vertically Aligned Pt Nanowire Array Electrodes

    Directory of Open Access Journals (Sweden)

    Zhiyang Li

    2015-09-01

    Full Text Available In this paper, vertically aligned Pt nanowire arrays (PtNWA with different lengths and surface roughnesses were fabricated and their electrochemical performance toward hydrogen peroxide (H2O2 detection was studied. The nanowire arrays were synthesized by electroplating Pt in nanopores of anodic aluminum oxide (AAO template. Different parameters, such as current density and deposition time, were precisely controlled to synthesize nanowires with different surface roughnesses and various lengths from 3 μm to 12 μm. The PtNWA electrodes showed better performance than the conventional electrodes modified by Pt nanowires randomly dispersed on the electrode surface. The results indicate that both the length and surface roughness can affect the sensing performance of vertically aligned Pt nanowire array electrodes. Generally, longer nanowires with rougher surfaces showed better electrochemical sensing performance. The 12 μm rough surface PtNWA presented the largest sensitivity (654 μA·mM−1·cm−2 among all the nanowires studied, and showed a limit of detection of 2.4 μM. The 12 μm rough surface PtNWA electrode also showed good anti-interference property from chemicals that are typically present in the biological samples such as ascorbic, uric acid, citric acid, and glucose. The sensing performance in real samples (river water was tested and good recovery was observed. These Nafion-free, vertically aligned Pt nanowires with surface roughness control show great promise as versatile electrochemical sensors and biosensors.

  2. Mesoporous TiO2 Nanowire Film for Dye-Sensitized Solar Cell.

    Science.gov (United States)

    Xiao, Li; Xu, Jia; Liu, Xiu; Zhang, Yongzhe; Zhang, Bing; Yao, Jianxi; Dai, Songyuan; Tan, Zhanao; Pan, Xu

    2016-06-01

    In this work, TiO2 nanowire arrays were grown on fluorine-doped tin oxide (FTO) glass substrate, and then were converted into mesoporous nanowires (MNWs). The TiO2 MNWs are about 5 μm in length and 30-200 nm in diameter, with mesopores size of 5-30 nm randomly distributed on the NW surface. X-ray diffraction pattern reports show that the NWs are single crystallized rutile TiO2 and oriented grown along [001]. Through further characterization of FT-IR and TG-DSC, we proposed a reasonable explanation for pore existence. After dye-sensitized solar cells (DSSCs) assembly, the photoelectric conversion efficiency (PCE) of MNWs based DSSC achieved 3.2%. It means tenfold enhancement of photoelectric property compare with the as-grown NWs. Furthermore, dye absorb capacity of MNWs can reach up to 4.11 x 10(-8) mol/cm2. However, such MNWs can not only provide quick and efficient electron transmission channel, but also owns big specific surface area to absorb abundant dyes, thus conducive to fabricate solar cell with a high PCE.

  3. Uniaxial Magnetization Performance of Textured Fe Nanowire Arrays Electrodeposited by a Pulsed Potential Deposition Technique

    Science.gov (United States)

    Neetzel, C.; Ohgai, T.; Yanai, T.; Nakano, M.; Fukunaga, H.

    2017-11-01

    Textured ferromagnetic Fe nanowire arrays were electrodeposited using a rectangular-pulsed potential deposition technique into anodized aluminum oxide nanochannels. During the electrodeposition of Fe nanowire arrays at a cathodic potential of - 1.2 V, the growth rate of the nanowires was ca. 200 nm s-1. The aspect ratio of Fe nanowires with a diameter of 30 ± 5 nm reached ca. 2000. The long axis of Fe nanowires corresponded with the direction when a large overpotential during the on-time pulse was applied, whereas it orientated to the direction under the potentiostatic condition with a small overpotential. By shifting the on-time cathode potential up to - 1.8 V, the texture coefficient for the (200) plane, TC200, reached up to 1.94. Perpendicular magnetization performance was observed in Fe nanowire arrays. With increasing TC200, the squareness of Fe nanowire arrays increased up to 0.95 with the coercivity maintained at 1.4 kOe at room temperature. This research result has opened a novel possibility of Fe nanowire arrays that can be applied for a new permanent magnetic material without rare-earth metals.

  4. Synthesis of crystalline CoFe{sub x} nanowire arrays through high voltage pulsed electrochemical deposition

    Energy Technology Data Exchange (ETDEWEB)

    Ji, Renlong; Cao, Chuanbao, E-mail: cbcao@bit.edu.cn; Chen, Zhuo; Yao, Ruimin

    2014-08-01

    A high voltage pulsed electrochemical deposition (50 Hz, −50 V) technique was used to synthesize CoFe{sub x} (x=1.57, 2.02) nanowire arrays in anodic aluminum oxide templates. The nanowire arrays (NA) are different in diameter (NA A, 40 nm; NA B, 50 nm), center-to-center distance (NA A, 60 nm; NA B, 100 nm) and length (NA A, 4 μm; NA B, 8 μm). Microstructural characterization shows high crystallinity of the formed nanowires. The magnetic measurements indicate that the nanowire arrays possess uniaxial anisotropy with the easy magnetization axis along the nanowire. When magnetic field is applied in this direction, the coercivities of both nanowire arrays are larger than 1600 Oe. The shape difference between two magnetization hysteresis loops is due to dipolar magnetostatic interaction, and analytical calculation is performed to interpret the magnetic properties as a function of the wire geometry. The results suggest that during high voltage electrodeposition, reduced atoms are highly energetic and the crystallographic growth planes can be (110), (111) and (211). - Highlights: • High voltage pulsed electrochemical deposition technique (−50 V) is employed. • Nanowire arrays exhibit high coercivities (>1600 Oe). • Crystallites with high crystallinity and different growth orientations are discovered in the nanowires. • The high-energetic reduced atoms can stack on the usually reported (110) plane together with (111) or (211) plane. • The shape difference between two magnetization hysteresis loops is due to dipolar magnetostatic interaction.

  5. Schottky Barrier Transport for Multiphase Gallium Nitride Nanowire

    Science.gov (United States)

    Hartz, Steven; Xie, Kan; Liu, Zhun; Ayres, Virginia

    2013-03-01

    Our group has shown that gallium nitride nanowires grown by catalyst-free vapor deposition at 850oC have multiple internal crystalline regions that may be zinc blende or wurtzite phase. Stability is enabled by one or more totally coherent (0001)/(111) internal interfaces. Cross-section HRTEM has further demonstrated that, while the transverse nanowire profile appears triangular, it is actually made up of two or more surface orientations corresponding to the multi-phase internal regions. We present results of a transport investigation of these multiphase nanowires within a nanoFET circuit architecture, focusing on injection from the contacts into the nanowires. Experimental results demonstrated that a variety of surface state derived Schottky barriers could be present at the contact-nanowire interfaces. Transport across the Schottky barriers was modeled using a combined thermionic emission-tunnelling approach, leading to information about barrier height, carrier concentrations, and expected temperature behavior. The experimental and theoretical results indicate that with optimal design taking surface and internal structures into account, high current densities can be supported.

  6. Aging of Organic Nanowires

    DEFF Research Database (Denmark)

    Balzer, Frank; Schiek, Manuela; Osadnik, Andreas

    2012-01-01

    conditions already expose substantial changes in sample morphology within hours. Clusters show Ostwald ripening, whereas nanowires reveal strong faceting and even fragmentation. All these aging effects are ascribed to the influence of water vapor. Decay curves (cluster number vs. time) for clusters...

  7. Magnetic and superconducting nanowires

    DEFF Research Database (Denmark)

    Piraux, L.; Encinas, A.; Vila, L.

    2005-01-01

    This article is focused on the use of electrodeposition and of various nanoporous templates for the fabrication of metallic nanowires made from single metals (Ni, Co, Pb, Sn), alloys (NiFe, CoFe, CoPt), and multilayers (Co/Cu, NiFe/Cu). An overview is given of our recent studies performed on both...... discussed....

  8. Endface reflectivities of optical nanowires.

    Science.gov (United States)

    Wang, Shanshan; Hu, Zhifang; Yu, Huakang; Fang, Wei; Qiu, Min; Tong, Limin

    2009-06-22

    Endface reflectivities (ERs) of optical nanowires are investigated using three-dimensional finite-difference time-domain simulations. Typical ERs of both free-standing and substrate-supported silica, tellurite, PMMA and semiconductor nanowires or nanofibers are obtained. Unlike in conventional waveguides such as optical fibers, ERs of nanowires are usually considerably lower when operated in single mode. Dependences of ER on the diameter and the refractive index of the nanowire, and the wavelength of the guided light are also investigated. These results are helpful for estimating and understanding ERs in optical nanowires with diameters close to or smaller than the wavelengths of the light, and may offer valuable references for practical applications such as nanowire or nanofiber-based resonators and lasers.

  9. An atomistic study of the deformation behavior of tungsten nanowires

    Science.gov (United States)

    Xu, Shuozhi; Su, Yanqing; Chen, Dengke; Li, Longlei

    2017-12-01

    Large-scale atomistic simulations are performed to study tensile and compressive loading of single-crystalline nanowires in body-centered cubic tungsten (W). Effects of loading mode, wire cross-sectional shape, wire size, strain rate, and crystallographic orientations of the lateral surfaces are explored. Uniaxial deformation of a W bulk single crystal is also investigated for reference. Our results reveal a strong tension-compression asymmetry in both the stress-strain response and the deformation behavior due to different yielding/failure modes: while the nanowires fail by brittle fracture under tensile loading, they yield by nucleation of dislocations from the wire surface under compressive loading. It is found that (1) nanowires have a higher strength than the bulk single crystal; (2) with a cross-sectional size larger than 10 nm, there exists a weak dependence of strength on wire size; (3) when the wire size is equal to or smaller than 10 nm, nanowires buckle under compressive loading; (4) the cross-sectional shape, strain rate, and crystallographic orientations of the lateral surfaces affect the strength and the site of defect initiation but not the overall deformation behavior.

  10. Influence of boric acid (H3BO3) concentration on the physical properties of electrochemical deposited nickel (Ni) nanowires

    Science.gov (United States)

    Kananathan, J.; Sofiah, A. G. N.; Samykano, M.; Ulakanathan, S.; Lah, N. A. C.; Harun, W. S. W.; Sudhakar, K.; Kadirgama, K.; Ngui, W. K.; Siregar, J. P.

    2017-10-01

    Authors have investigated the influence of the stabilizer (Boric Acid) concentration during the template-assisted electrochemical deposition of Nickel (Ni) nanowires in Anodic Alumina Oxide (AAO) templates. The synthesis was performed using Ni Sulfate Hexahydrate (NiSO4.6H2O) as metal salts and Boric Acid (H3BO3) as a stabilizer. The mixture of both solutions creates electrolyte and utilized for the electrochemical deposition of Ni nanowires. During the experiment, the boric acid concentration varied between 5 g/L, 37.5 g/L and 60 g/L with a deposition temperature of 80 °C (constant). After the electrochemical deposition process, AAO templates were cleaned with distilled water before dissolution in Sodium Hydroxide (NaOH) solution to obtain the freestanding Ni nanowires. Physical properties of the synthesized Ni nanowires were analyzed using Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive Spectroscopy (EDX) and X-ray Diffraction (XRD). The physical properties of obtained Ni nanowires has eloborated by taking into account the effect of boric acid concentration on the surface morphology, growth length, elemental composition and crystal orientation crystal of the synthesized nickel nanowires. The finding exposes that the boric acid concentration does not influence all aspects in the physicals properties of the synthesized Ni nanowires. The boric acid concentration did not affect the surface texture and crystal orientation. However, shorter Ni nanowires obtained as the concentration of boric acid increased.

  11. Strain-induced structural defects and their effects on the electrochemical performances of silicon core/germanium shell nanowire heterostructures.

    Science.gov (United States)

    Lin, Yung-Chen; Kim, Dongheun; Li, Zhen; Nguyen, Binh-Minh; Li, Nan; Zhang, Shixiong; Yoo, Jinkyoung

    2017-01-19

    We report on strain-induced structural defect formation in core Si nanowires of a Si/Ge core/shell nanowire heterostructure and the influence of the structural defects on the electrochemical performances in lithium-ion battery anodes based on Si/Ge core/shell nanowire heterostructures. The induced structural defects consisting of stacking faults and dislocations in the core Si nanowire were observed for the first time. The generation of stacking faults in the Si/Ge core/shell nanowire heterostructure is observed to prefer settling in either only the Ge shell region or in both the Ge shell and Si core regions and is associated with the increase of the shell volume fraction. The relaxation of the misfit strain in the [112] oriented core/shell nanowire heterostructure leads to subsequent gliding of Shockley partial dislocations, preferentially forming the twins. The observation of crossover of defect formation is of great importance for understanding heteroepitaxy in radial heterostructures at the nanoscale and for building three dimensional heterostructures for the various applications. Furthermore, the effect of the defect formation on the nanomaterial's functionality is investigated using electrochemical performance tests. The Si/Ge core/shell nanowire heterostructures enhance the gravimetric capacity of lithium ion battery anodes under fast charging/discharging rates compared to Si nanowires. However, the induced structural defects hamper lithiation of the Si/Ge core/shell nanowire heterostructure.

  12. Optical Spectroscopy of Single Nanowires

    OpenAIRE

    Trägårdh, Johanna

    2008-01-01

    This thesis describes optical spectroscopy on III-V semiconductor nanowires. The nanowires were grown by metal-organic vapor phase epitaxy (MOVPE) and chemical beam epitaxy (CBE). Photoluminescence and photocurrent spectroscopy are used as tools to investigate issues such as the size of the band gap, the effects of surface states, and the charge carrier transport in core-shell nanowires. The band gap of InAs1-xPx nanowires with wurtzite crystal structure is measured as a function of ...

  13. Growth and Raman spectroscopy studies of gold-free catalyzed semiconductor nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Zardo, Ilaria

    2010-12-15

    The present Ph.D. thesis proposes two aims: the search for catalysts alternative to gold for the growth of silicon nanowires and the investigation of the structural properties of the gold-free catalyzed Si, Ge, and GaAs nanowires. The successful growth of gold free catalyzed silicon nanowires was obtained using Ga and In as catalyst. Hydrogen plasma conditions were needed during the growth process. We proposed a growth mechanism where the role of the hydrogen plasma is taken into account. The influence of the growth conditions on nanowire growth morphology and structural properties was investigated in detail. The TEM studies showed the occurrence of different kind of twin defects depending on the nanowire growth direction. The intersection of twins in different spatial directions in <111>-oriented nanowires or the periodicity of highly dense twins in <112>-oriented nanowires leads to the formation of hexagonal domains embedded in the diamond silicon structure. A simple crystallographic model which illustrates the formation of the hexagonal phase was proposed. The presence of the hexagonal domains embedded in the diamond silicon structure was investigated also by means of Raman spectroscopy. The measured frequencies of the E2g and A1g modes were found to be in agreement with frequencies expected from phonon dispersion folding. An estimation of the percentage of hexagonal structure with respect to the cubic structure was given. The relative percentage of the two structures was found to change with growth temperature. Spatially resolved Raman scattering experiments were also realized on single Si nanowires. The lattice dynamics of gold-free catalyzed Ge and GaAs nanowires was studied by means of Raman spectroscopy. We performed spatially resolved Raman spectroscopy experiments on single crystalline- amorphous core-shell Ge nanowires. The correlation with TEM studies on nanowires grown under the same conditions and with AFM measurements realized of the same nanowires

  14. A Randomized Trial to Measure the Efficacy of Applying Task Oriented Role Assignment to Improve Neonatal Resuscitation

    Science.gov (United States)

    2017-05-06

    DEPARTMENT OF THE AIR FORCE 59TH MEDICAL W ING (AETC) JOINT BASE SAN ANTONIO - LACKLAND TEXAS MEMORANOUMFORSGVT ATTN: MAJ CARRIE LITKE-WAGER...Author Litke· Wager, Carrie 0-4/Major 959/CSPS/ 59MDW/SGVT b. Mu, Thornton 0-5/LTC MCH E-ZDP-N SA MMC c. Delaney, Heather 0-4/ MAJ MCHE-ZDP-N SA MMC d...78234-2715 15 June 2016 Maj Carrie Litke-Wager, MD Brooke Army Medical Center Institutional Review Board A Randomized Trial to Measure the

  15. Nanowire Field-Effect Transistors : Sensing Simplicity?

    NARCIS (Netherlands)

    Mescher, M.

    2014-01-01

    Silicon nanowires are structures made from silicon with at least one spatial dimension in the nanometer regime (1-100 nm). From these nanowires, silicon nanowire field-effect transistors can be constructed. Since their introduction in 2001 silicon nanowire field-effect transistors have been studied

  16. Silicon nanowire transistors

    CERN Document Server

    Bindal, Ahmet

    2016-01-01

    This book describes the n and p-channel Silicon Nanowire Transistor (SNT) designs with single and dual-work functions, emphasizing low static and dynamic power consumption. The authors describe a process flow for fabrication and generate SPICE models for building various digital and analog circuits. These include an SRAM, a baseband spread spectrum transmitter, a neuron cell and a Field Programmable Gate Array (FPGA) platform in the digital domain, as well as high bandwidth single-stage and operational amplifiers, RF communication circuits in the analog domain, in order to show this technology’s true potential for the next generation VLSI. Describes Silicon Nanowire (SNW) Transistors, as vertically constructed MOS n and p-channel transistors, with low static and dynamic power consumption and small layout footprint; Targets System-on-Chip (SoC) design, supporting very high transistor count (ULSI), minimal power consumption requiring inexpensive substrates for packaging; Enables fabrication of different types...

  17. Performance of inverted polymer solar cells with randomly oriented ZnO nanorods coupled with atomic layer deposited ZnO

    Energy Technology Data Exchange (ETDEWEB)

    Zafar, Muhammad [School of Chemical Engineering, Chonnam National University, 300 Youngbong-dong, Gwangju 500-757 (Korea, Republic of); Yun, Ju-Young [Center for Vacuum, Korea Research Institute of Standards and Science, 267 Gajeong-ro, Daejeon 305-600 (Korea, Republic of); Kim, Do-Heyoung, E-mail: kdhh@chonnam.ac.kr [School of Chemical Engineering, Chonnam National University, 300 Youngbong-dong, Gwangju 500-757 (Korea, Republic of)

    2017-03-15

    Highlights: • Hydrothermally grown, randomly oriented, and low areal density ZnO nanorods have been successfully adopted as the electron transport layer in inverted organic solar cells. • The addition of atomic layer deposited ZnO on the ZnO nanorods effectively enhance the photovoltaic performances of inverted organic solar cells. • The inverted organic solar cells with 5 nm thick-ALD ZnO showed the highest power conversion efficiency of 3.08%, which is an enhancement of approximately 80% compared to the cells without the ALD ZnO layer (PCE = 1.67%). - Abstract: Nanostructuring of the electron transport layer (ETL) in organic photovoltaic cells (OPV) is of great interest because it increases the surface area of the cell and electron transport. In this work, hydrothermally grown, randomly oriented, and low areal density ZnO nanorods (NRs) have been adopted as the ETL, and the effect of adding atomic layer deposited (ALD) ZnO on the ZnO NRs on the inverted organic solar cell performance has been investigated. The fabricated inverted organic solar cell with 5-nm-thick ALD-ZnO grown on the ZnO NRs showed the highest power conversion efficiency (PCE) of 3.08%, which is an enhancement of 85% from that of the cell without ALD-ZnO (PCE = 1.67%). The ultrathin ALD-ZnO was found to act as a curing layer of the surface defects on the hydrothermally grown ZnO NRs, resulting in an improvement in photovoltaic performance.

  18. Algorithm for Reconstruction of 3D Images of Nanorice Particles from Diffraction Patterns of Two Particles in Independent Random Orientations with an X-ray Laser

    Directory of Open Access Journals (Sweden)

    Sung Soon Kim

    2017-06-01

    Full Text Available The method of angular correlations recovers quantities from diffraction patterns of randomly oriented particles, as expected to be measured with an X-ray free electron laser (XFEL, proportional to quadratic functions of the spherical harmonic expansion coefficients of the diffraction volume of a single particle. We have previously shown that it is possible to reconstruct a randomly oriented icosahedral or helical virus from the average over all measured diffraction patterns of such correlations. We point out in this paper that a structure of even simpler particles of 50 Å or so in diameter and consisting of heavier atomic elements (to enhance scattering that has been used as a test case for reconstructions from XFEL diffraction patterns can also be solved by this technique. Even though there has been earlier work on similar objects (prolate spheroids, one advantage of the present technique is its potential to also work with diffraction patterns not only due to single particles as has been suggested on the basis on nonoverlapping delta functions of angular scattering. Accordingly, we calculated from the diffraction patterns the angular momentum expansions of the pair correlations and triple correlations for general particle images and reconstructed those images in the standard way. Although the images looked pretty much the same, it is not totally clear to us that the angular correlations are exactly the same as different numbers of particles due to the possibility of constructive or destructive interference between the scattered waves from different particles. It is of course known that, for a large number of particles contributing to a diffraction parttern, the correlations converge to that of a single particle. It could be that the lack of perfect agreement between the images reconstructed with one and two particles is due to uncancelling constructive and destructive conditions that are not found in the case of solution scattering.

  19. Efficacy of a Peer-Led, Recovery-Oriented Shared Decision-Making System: A Pilot Randomized Controlled Trial.

    Science.gov (United States)

    Yamaguchi, Sosei; Taneda, Ayano; Matsunaga, Asami; Sasaki, Natsuki; Mizuno, Masashi; Sawada, Yumiko; Sakata, Masuhiro; Fukui, Satoe; Hisanaga, Fumie; Bernick, Peter; Ito, Junichiro

    2017-12-01

    The effects of a comprehensive shared decision-making system based on the CommonGround approach and incorporating peer support and a computerized decision aid were investigated. A pilot randomized controlled trial with six-month follow-up was conducted in Japan. Fifty-six outpatients with mental illness were randomly allocated to a shared decision-making system (intervention) group or treatment as usual (control) group. The implementation process and several outcomes were compared between groups. The core components and processes of shared decision making were observed in the intervention group more frequently than in the control group. The intervention group also reported a significantly more positive participants' view of the relationship with their doctor than the control group. The intervention did not have a significant effect on most clinical and recovery-related outcomes. The shared decision-making system appeared to partly improve patients' perceptions of communication and relationships with doctors but did not have a significant effect on other patient-level outcomes.

  20. Quantitative magnetometry analysis and structural characterization of multisegmented cobalt–nickel nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Cantu-Valle, Jesus [Department of Physics and Astronomy, University of Texas at San Antonio, One UTSA Circle, San Antonio, TX 78249 (United States); Díaz Barriga-Castro, Enrique [Centro de Investigación de Ciencias Físico Matemáticas/Facultad de Ciencias Físico Matemáticas, Universidad Autónoma de Nuevo León, Pedro de Alba s/n, San Nicolás de Los Garza, Nuevo León 66450 (Mexico); Vega, Víctor; García, Javier [Departamento de Física, Universidad de Oviedo, Calvo Sotelo s/n, Oviedo 33007 (Spain); Mendoza-Reséndez, Raquel [Facultad de Ingeniería Mecánica y Eléctrica. Universidad Autónoma de Nuevo León, Pedro de Alba s/n, San Nicolás de Los Garza, Nuevo León 66450 (Mexico); Luna, Carlos [Centro de Investigación de Ciencias Físico Matemáticas/Facultad de Ciencias Físico Matemáticas, Universidad Autónoma de Nuevo León, Pedro de Alba s/n, San Nicolás de Los Garza, Nuevo León 66450 (Mexico); Manuel Prida, Víctor [Departamento de Física, Universidad de Oviedo, Calvo Sotelo s/n, Oviedo 33007 (Spain); and others

    2015-04-01

    Understanding and measuring the magnetic properties of an individual nanowire and their relationship with crystalline structure and geometry are of scientific and technological great interest. In this work, we report the localized study of the magnetic flux distribution and the undisturbed magnetization of a single ferromagnetic nanowire that poses a bar-code like structure using off-axis electron holography (EH) under Lorentz conditions. The nanowires were grown by template-assisted electrodeposition, using AAO templates. Electron holography allows the visualization of the magnetic flux distribution within and surroundings as well as its quantification. The magnetic analysis performed at individual nanowires was correlated with the chemical composition and crystalline orientation of the nanowires. - Highlights: • The structure-magnetic property relationship of CoNi nanowires is determined. • Off axis electron holography for the magnetic nanowires is used for the analysis. • The magnetization is quantitatively obtained from the retrieved phase images. • These results lead to a better comprehension of the magneto-crystalline phenomena.

  1. Optical and morphological properties of graphene sheets decorated with ZnO nanowires via polyol enhancement

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Vinay, E-mail: winn201@gmail.com; Rajaura, Rajveer Singh, E-mail: winn201@gmail.com [Centre for Converging Technologies, University of Rajasthan, Jaipur - 302004 (India); Sharma, Preetam K.; Srivastava, Subodh; Vijay, Y. K. [Department of Physics, Thin Film and Membrane Science Lab., University of Rajasthan, Jaipur - 302004 (India); Sharma, S. S. [Department of Physics, Govt. Women Engineering College, Ajmer- 305002 (India)

    2014-04-24

    Graphene-ZnO nanocomposites have proven to be very useful materials for photovoltaic and sensor applications. Here, we report a facile, one-step in situ polymerization method for synthesis of graphene sheets randomly decorated with zinc oxide nanowires using ethylene glycol as solvent. We have used hydrothermal treatment for growth of ZnO nanowires. UV-visible spectra peak shifting around 288nm and 307 nm shows the presence of ZnO on graphene structure. Photoluminiscence spectra (PL) in 400nm-500nm region exhibits the luminescence quenching effect. Scanning electron microscopy (SEM) image confirms the growth of ZnO nanowires on graphene sheets.

  2. The PULSAR Specialist Care protocol: a stepped-wedge cluster randomized control trial of a training intervention for community mental health teams in recovery-oriented practice.

    Science.gov (United States)

    Shawyer, Frances; Enticott, Joanne C; Brophy, Lisa; Bruxner, Annie; Fossey, Ellie; Inder, Brett; Julian, John; Kakuma, Ritsuko; Weller, Penelope; Wilson-Evered, Elisabeth; Edan, Vrinda; Slade, Mike; Meadows, Graham N

    2017-05-08

    Recovery features strongly in Australian mental health policy; however, evidence is limited for the efficacy of recovery-oriented practice at the service level. This paper describes the Principles Unite Local Services Assisting Recovery (PULSAR) Specialist Care trial protocol for a recovery-oriented practice training intervention delivered to specialist mental health services staff. The primary aim is to evaluate whether adult consumers accessing services where staff have received the intervention report superior recovery outcomes compared to adult consumers accessing services where staff have not yet received the intervention. A qualitative sub-study aims to examine staff and consumer views on implementing recovery-oriented practice. A process evaluation sub-study aims to articulate important explanatory variables affecting the interventions rollout and outcomes. The mixed methods design incorporates a two-step stepped-wedge cluster randomized controlled trial (cRCT) examining cross-sectional data from three phases, and nested qualitative and process evaluation sub-studies. Participating specialist mental health care services in Melbourne, Victoria are divided into 14 clusters with half randomly allocated to receive the staff training in year one and half in year two. Research participants are consumers aged 18-75 years who attended the cluster within a previous three-month period either at baseline, 12 (step 1) or 24 months (step 2). In the two nested sub-studies, participation extends to cluster staff. The primary outcome is the Questionnaire about the Process of Recovery collected from 756 consumers (252 each at baseline, step 1, step 2). Secondary and other outcomes measuring well-being, service satisfaction and health economic impact are collected from a subset of 252 consumers (63 at baseline; 126 at step 1; 63 at step 2) via interviews. Interview-based longitudinal data are also collected 12 months apart from 88 consumers with a psychotic disorder

  3. Improvements in Orientation and Balancing Abilities in Response to One Month of Intensive Slackline-Training. A Randomized Controlled Feasibility Study.

    Science.gov (United States)

    Dordevic, Milos; Hökelmann, Anita; Müller, Patrick; Rehfeld, Kathrin; Müller, Notger G

    2017-01-01

    Background: Slackline-training has been shown to improve mainly task-specific balancing skills. Non-task specific effects were assessed for tandem stance and preferred one-leg stance on stable and perturbed force platforms with open eyes. It is unclear whether transfer effects exist for other balancing conditions and which component of the balancing ability is affected. Also, it is not known whether slackline-training can improve non-visual-dependent spatial orientation abilities, a function mainly supported by the hippocampus. Objective: To assess the effect of one-month of slackline-training on different components of balancing ability and its transfer effects on non-visual-dependent spatial orientation abilities. Materials and Methods: Fifty subjects aged 18-30 were randomly assigned to the training group (T) (n = 25, 23.2 ± 2.5 years; 12 females) and the control group (C) (n = 25, 24.4 ± 2.8 years; 11 females). Professional instructors taught the intervention group to slackline over four consecutive weeks with three 60-min-trainings in each week. Data acquisition was performed (within 2 days) by blinded investigators at the baseline and after the training. Main outcomes Improvement in the score of a 30-item clinical balance test (CBT) developed at our institute (max. score = 90 points) and in the average error distance (in centimeters) in an orientation test (OT), a triangle completion task with walking and wheelchair conditions for 60°, 90°, and 120°. Results: Training group performed significantly better on the closed-eyes conditions of the CBT (1.6 points, 95% CI: 0.6 to 2.6 points vs. 0.1 points, 95% CI: -1 to 1.1 points; p = 0.011, [Formula: see text] = 0.128) and in the wheelchair (vestibular) condition of the OT (21 cm, 95% CI: 8-34 cm vs. 1 cm, 95% CI: -14-16 cm; p = 0.049, [Formula: see text] = 0.013). Conclusion: Our results indicate that one month of intensive slackline training is a novel approach for enhancing clinically relevant balancing

  4. Coaxial nanowire resonant tunneling diodes from non-polar AlN/GaN on silicon

    Science.gov (United States)

    Carnevale, S. D.; Marginean, C.; Phillips, P. J.; Kent, T. F.; Sarwar, A. T. M. G.; Mills, M. J.; Myers, R. C.

    2012-04-01

    Resonant tunneling diodes are formed using AlN/GaN core-shell nanowire heterostructures grown by plasma assisted molecular beam epitaxy on n-Si(111) substrates. By using a coaxial geometry, these devices take advantage of non-polar (m-plane) nanowire sidewalls. Device modeling predicts non-polar orientation should enhance resonant tunneling compared to a polar structure, and that AlN double barriers will lead to higher peak-to-valley current ratios compared to AlGaN barriers. Electrical measurements of ensembles of nanowires show negative differential resistance appearing only at cryogenic temperature. Individual nanowire measurements show negative differential resistance at room temperature with peak current density of 5 × 105 A/cm2.

  5. Computational analysis of metallic nanowire-elastomer nanocomposite based strain sensors

    Science.gov (United States)

    Lee, Sangryun; Amjadi, Morteza; Pugno, Nicola; Park, Inkyu; Ryu, Seunghwa

    2015-11-01

    Possessing a strong piezoresistivity, nanocomposites of metal nanowires and elastomer have been studied extensively for its use in highly flexible, stretchable, and sensitive sensors. In this work, we analyze the working mechanism and performance of a nanocomposite based stretchable strain sensor by calculating the conductivity of the nanowire percolation network as a function of strain. We reveal that the nonlinear piezoresistivity is attributed to the topological change of percolation network, which leads to a bottleneck in the electric path. We find that, due to enhanced percolation, the linearity of the sensor improves with increasing aspect ratio or volume fraction of the nanowires at the expense of decreasing gauge factor. In addition, we show that a wide range of gauge factors (from negative to positive) can be obtained by changing the orientation distribution of nanowires. Our study suggests a way to intelligently design nanocomposite-based piezoresistive sensors for flexible and wearable devices.

  6. Ta2O5 nanowires: a novel synthetic method and their solar energy utilization.

    Science.gov (United States)

    Lü, Xujie; Ding, Shangjun; Lin, Tianquan; Mou, Xinliang; Hong, Zhanglian; Huang, Fuqiang

    2012-01-14

    Single-crystalline uniform Ta(2)O(5) nanowires are prepared by a novel synthetic route. The formation of the nanowires involves an oriented attachment process caused by the reduction of surface energy. The nanowires are successfully applied to photocatalytic H(2) evolution, contaminant degradation, and dye-sensitized solar cells (DSCs). The Ta(2)O(5)-based DSCs reveal a significant photovoltaic response, which has not been reported. As a photocatalyst, the Ta(2)O(5) nanowires possess high H(2) evolution efficiency under Xe lamp irradiation, nearly 27-fold higher than the commercial powders. A better performance of photocatalytic contaminant degradation is also observed. Such improvements are ascribed to better charge transport ability for the single-crystalline wire and a higher potential energy of the conduction band. This new synthetic approach using a water-soluble precursor provides a versatile way to prepare nanostructured metal oxides.

  7. Origin of yellow-band emission in epitaxially grown GaN nanowire arrays.

    Science.gov (United States)

    Liu, Baodan; Yuan, Fang; Dierre, Benjamin; Sekiguchi, Takashi; Zhang, Song; Xu, Yongkuan; Jiang, Xin

    2014-08-27

    Here, we report the origin of the yellow-band emission in epitaxial GaN nanowire arrays grown under carbon-free conditions. GaN nanowires directly grown on [0001]-oriented sapphire substrate exhibit an obvious and broad yellow-band in the visible range 400-800 nm, whereas the insertion of Al/Au layers in GaN-sapphire interface significantly depresses the visible emission, and only a sharp peak in the UV range (369 nm) can be observed. The persuasive differences in cathodoluminescence provide direct evidence for demonstrating that the origin of the yellow-band emission in GaN nanowire arrays arises from dislocation threading. The idea using buffering/barrier layers to isolate the dislocation threading in epitaxially grown GaN nanowires can be extended to the rational synthesis and structural defect controlling of a wide range of semiconductor films and nanostructures with superior crystal quality and excellent luminescence property.

  8. Stable field emission from arrays of vertically aligned free-standing metallic nanowires

    DEFF Research Database (Denmark)

    Xavier, S.; Mátéfi-Tempfli, Stefan; Ferain, E.

    2008-01-01

    the nanowire surface is developed to explain this particular field emission behaviour. Finally, we present an in situ cleaning procedure by ion bombardment that collectively removes this oxide layer, leading to a stable and reproducible emission behaviour. After treatment, the emission current density is ∼1 m...... fabrication and large surfaces. This technique offers an excellent control of the orientation, shape and nanowires density. It is applied to fabricate field emission arrays with a good control of the emission site density. We have prepared Co, Ni, Cu and Rh nanowires with a height of 3 μm, a diameter of 80 nm...... and a density of ∼10 cm. The electron field emission measurements and total energy distributions show that the as-grown nanowires exhibit a complex behaviour, first with emission activation under high field, followed by unstable emission. A model taking into account the effect of an oxide layer covering...

  9. Plasmonic hybridization induced trapping and manipulation of a single Au nanowire on a metallic surface.

    Science.gov (United States)

    Zhang, Yuquan; Wang, Jian; Shen, Junfeng; Man, Zhongsheng; Shi, Wei; Min, Changjun; Yuan, Guanghui; Zhu, Siwei; Urbach, H Paul; Yuan, Xiaocong

    2014-11-12

    Hybridization in the narrow gaps between the surface plasmon polaritons (SPPs) along a metal surface and the localized surface plasmons on metallic nano-objects strongly enhance the electromagnetic field. Here, we employ plasmonic hybridization to achieve dynamic trapping and manipulation of a single metallic nanowire on a flat metal surface. We reveal that the plasmonic hybridization achieved by exciting plasmonic tweezers with a linearly polarized laser beam could induce strong trapping forces and large rotational torques on a single metallic nanowire. The position and orientation of the nanowire could dynamically be controlled by the hybridization-enhanced nonisotropic electric field in the gap. Experimental results further verify that a single Au nanowire could robustly be trapped at the center of an excited SPP field by the induced forces and then rotated by the torques. Finally, a plasmonic swallow tail structure is built to demonstrate its potential in the fabrication of lab-on-a-chip plasmonic devices.

  10. Computational analysis of metallic nanowire-elastomer nanocomposite based strain sensors

    Directory of Open Access Journals (Sweden)

    Sangryun Lee

    2015-11-01

    Full Text Available Possessing a strong piezoresistivity, nanocomposites of metal nanowires and elastomer have been studied extensively for its use in highly flexible, stretchable, and sensitive sensors. In this work, we analyze the working mechanism and performance of a nanocomposite based stretchable strain sensor by calculating the conductivity of the nanowire percolation network as a function of strain. We reveal that the nonlinear piezoresistivity is attributed to the topological change of percolation network, which leads to a bottleneck in the electric path. We find that, due to enhanced percolation, the linearity of the sensor improves with increasing aspect ratio or volume fraction of the nanowires at the expense of decreasing gauge factor. In addition, we show that a wide range of gauge factors (from negative to positive can be obtained by changing the orientation distribution of nanowires. Our study suggests a way to intelligently design nanocomposite-based piezoresistive sensors for flexible and wearable devices.

  11. Comparison of Cognitive Orientation to daily Occupational Performance and conventional occupational therapy on occupational performance in individuals with stroke: A randomized controlled trial.

    Science.gov (United States)

    Ahn, Si-Nae; Yoo, Eun-Young; Jung, Min-Ye; Park, Hae-Yean; Lee, Ji-Yeon; Choi, Yoo-Im

    2017-01-01

    Cognitive Orientation to daily Occupational Performance (CO-OP) approach based on cognitive strategy in occupational therapy. To investigate the effects of CO-OP approach on occupational performance in individuals with hemiparetic stroke. This study was designed as a 5-week, randomized, single-blind. Forty-three participants who had a diagnosis of first stroke were enrolled in this study. The participants were randomly assigned to the experimental group (n = 20) or the control group (n = 23). The experimental group conducted CO-OP approach while the control group conducted conventional occupational therapy based on occupational performance components. This study measured Canadian Occupational Performance Measure (COPM) and Performance Quality Rating Scale (PQRS). Outcome measurements were performed at baseline and post-intervention. After training, the scores of COPM and PQRS in trained task were significantly higher for the score in the experimental group than the control group. In addition, the non-trained task was significantly higher for the score in the experimental group than the control group in COPM and the PQRS. This study suggests that the CO-OP approach is beneficial effects on the occupational performance to improvement in individuals with hemiparetic stroke, and have positive effects on generalization and transfer of acquired skills.

  12. Effects of motive-oriented therapeutic relationship in early-phase treatment of borderline personality disorder: a pilot study of a randomized trial.

    Science.gov (United States)

    Kramer, Ueli; Berger, Thomas; Kolly, Stéphane; Marquet, Pierre; Preisig, Martin; de Roten, Yves; Despland, Jean-Nicolas; Caspar, Franz

    2011-04-01

    Motive-oriented therapeutic relationship (MOTR, also called complementary therapeutic relationship) was postulated to be a particularly helpful therapeutic ingredient in the early-phase treatment of patients with personality disorders, in particular borderline personality disorder (BPD). The present pilot study of randomized controlled trial using an add-on design aims to investigate the effects of MOTR in early-phase treatment (up to session 10), with BPD patients on therapeutic alliance, session impact, and outcome. In total, N = 25 patients participated in the study. BPD patients were randomly allocated to a manual-based investigation process in 10 sessions or to the same investigation process infused with MOTR. Adherence ratings were performed and yielded satisfactory results. The results suggested a specific effectiveness of MOTR on the interpersonal problem area, on the quality of the therapeutic alliance and the quality of the therapeutic relationship, as rated by the patient. These results may have important clinical implications for the early-phase treatment of patients presenting with BPD.

  13. Effects of motive-oriented therapeutic relationship in a ten-session general psychiatric treatment of borderline personality disorder: a randomized controlled trial.

    Science.gov (United States)

    Kramer, Ueli; Kolly, Stéphane; Berthoud, Laurent; Keller, Sabine; Preisig, Martin; Caspar, Franz; Berger, Thomas; de Roten, Yves; Marquet, Pierre; Despland, Jean-Nicolas

    2014-01-01

    Motive-oriented therapeutic relationship (MOTR) was postulated to be a particularly helpful therapeutic ingredient in the early treatment phase of patients with personality disorders, in particular with borderline personality disorder (BPD). The present randomized controlled study using an add-on design is the first study to test this assumption in a 10-session general psychiatric treatment with patients presenting with BPD on symptom reduction and therapeutic alliance. A total of 85 patients were randomized. They were either allocated to a manual-based short variant of the general psychiatric management (GPM) treatment (in 10 sessions) or to the same treatment where MOTR was deliberately added to the treatment. Treatment attrition and integrity analyses yielded satisfactory results. The results of the intent-to-treat analyses suggested a global efficacy of MOTR, in the sense of an additional reduction of general problems, i.e. symptoms, interpersonal and social problems (F1, 73 = 7.25, p < 0.05). However, they also showed that MOTR did not yield an additional reduction of specific borderline symptoms. It was also shown that a stronger therapeutic alliance, as assessed by the therapist, developed in MOTR treatments compared to GPM (Z55 = 0.99, p < 0.04). These results suggest that adding MOTR to psychiatric and psychotherapeutic treatments of BPD is promising. Moreover, the findings shed additional light on the perspective of shortening treatments for patients presenting with BPD. © 2014 S. Karger AG, Basel.

  14. Mindfulness-Oriented Recovery Enhancement versus CBT for co-occurring substance dependence, traumatic stress, and psychiatric disorders: Proximal outcomes from a pragmatic randomized trial.

    Science.gov (United States)

    Garland, Eric L; Roberts-Lewis, Amelia; Tronnier, Christine D; Graves, Rebecca; Kelley, Karen

    2016-02-01

    In many clinical settings, there is a high comorbidity between substance use disorders, psychiatric disorders, and traumatic stress. Novel therapies are needed to address these co-occurring issues efficiently. The aim of the present study was to conduct a pragmatic randomized controlled trial comparing Mindfulness-Oriented Recovery Enhancement (MORE) to group Cognitive-Behavioral Therapy (CBT) and treatment-as-usual (TAU) for previously homeless men residing in a therapeutic community. Men with co-occurring substance use and psychiatric disorders, as well as extensive trauma histories, were randomly assigned to 10 weeks of group treatment with MORE (n = 64), CBT (n = 64), or TAU (n = 52). Study findings indicated that from pre-to post-treatment MORE was associated with modest yet significantly greater improvements in substance craving, post-traumatic stress, and negative affect than CBT, and greater improvements in post-traumatic stress and positive affect than TAU. A significant indirect effect of MORE on decreasing craving and post-traumatic stress by increasing dispositional mindfulness was observed, suggesting that MORE may target these issues via enhancing mindful awareness in everyday life. This pragmatic trial represents the first head-to-head comparison of MORE against an empirically-supported treatment for co-occurring disorders. Results suggest that MORE, as an integrative therapy designed to bolster self-regulatory capacity, may hold promise as a treatment for intersecting clinical conditions. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Transition of equilibrium stochastic to unidirectional velocity vectors in a nanowire subjected to a towering electric field

    Science.gov (United States)

    Arora, Vijay K.; Chek, Desmond C. Y.; Tan, Michael L. P.; Hashim, Abdul Manaf

    2010-12-01

    The equilibrium Fermi-Dirac distribution is revealed to transform to an asymmetric distribution in a very high electric field where the energy gained (or lost) in a mean free path is of paramount importance. The equilibrium stochastic velocity vectors randomly oriented in and opposite to the quasifree direction of a nanowire are shown to streamline in the presence of an extremely high electric field. The complete velocity-field characteristics are acquired. The ultimate directed drift velocity in a towering field is shown to be limited to the appropriately averaged Fermi velocity in the strongly degenerate limit where only half of the quantum states are accessible to electrons. This unidirectional velocity does not sensitively depend on the low-field Ohmic mobility. The emission of a quantum in the form of a phonon or photon lowers the saturation velocity from its ultimate unidirectional limit.

  16. Feeling Thanks and Saying Thanks: A Randomized Controlled Trial Examining If and How Socially Oriented Gratitude Journals Work.

    Science.gov (United States)

    O'Connell, Brenda H; O'Shea, Deirdre; Gallagher, Stephen

    2017-10-01

    This study examined the effect of a reflective interpersonal gratitude journal, a reflective-behavioral interpersonal gratitude journal and an active control journal, on primary qualities of well-being and depression. Participants (n = 192; 67.2% female) completed this 3-month longitudinal randomized controlled design. Participants in the reflective-behavioral condition experienced the greatest improvements in affect balance and reductions in depression at immediate posttest. Both gratitude interventions improved affect balance at 1 month, compared to the control. Changes in affect balance for those in the reflective-behavioral condition were mediated by the rate at which people expressed gratitude in their existing relationships. This effect was moderated by participant's baseline depressive status. Expressing felt gratitude to others appears to be a crucial step in deriving benefits, and these benefits may not be limited to the emotionally healthy. Given the applied popularity of gratitude interventions, understanding not only if but also how they work is essential. © 2017 Wiley Periodicals, Inc.

  17. Mask-free, vacuum-free fabrication of high-conductivity metallic nanowire by spatially shaped ultrafast laser (Conference Presentation)

    Science.gov (United States)

    Wang, Andong; Li, Xiaowei; Qu, Lianti; Lu, Yongfeng; Jiang, Lan

    2017-03-01

    Metal nanowire fabrication has drawn tremendous attention in recent years due to its wide application in electronics, optoelectronics, and plasmonics. However, conventional laser fabrication technologies are limited by diffraction limit thus the fabrication resolution cannot meet the increasingly high demand of modern devices. Herein we report on a novel method for high-resolution high-quality metal nanowire fabrication by using Hermite-Gaussian beam to ablate metal thin film. The nanowire is formed due to the intensity valley in the center of the laser beam while the surrounding film is ablated. Arbitrary nanowire can be generated on the substrate by dynamically adjusting the orientation of the intensity valley. This method shows obvious advantages compared to conventional methods. First, the minimum nanowire has a width of 60 nm (≍1/13 of the laser wavelength), which is much smaller than the diffraction limit. The high resolution is achieved by combining the ultrashort nature of the femtosecond laser and the low thermal conductivity of the thin film. In addition, the fabricated nanowires have good inside qualities. No inner nanopores and particle intervals are generated inside the nanowire, thus endowing the nanowire with good electronic characteristics: the conductivity of the nanowires is as high as 1.2×107 S/m (≍1/4 of buck material), and the maximum current density is up to 1.66×108 A/m2. Last, the nanowire has a good adhesion to the substrates, which can withstand ultrasonic bath for a long time. These advantages make our method a good approach for high-resolution high-quality nanowire fabrication as a complementary method to conventional lithography methods.

  18. Vertically aligned GaAs nanowires on graphite and few-layer graphene: generic model and epitaxial growth.

    Science.gov (United States)

    Munshi, A Mazid; Dheeraj, Dasa L; Fauske, Vidar T; Kim, Dong-Chul; van Helvoort, Antonius T J; Fimland, Bjørn-Ove; Weman, Helge

    2012-09-12

    By utilizing the reduced contact area of nanowires, we show that epitaxial growth of a broad range of semiconductors on graphene can in principle be achieved. A generic atomic model is presented which describes the epitaxial growth configurations applicable to all conventional semiconductor materials. The model is experimentally verified by demonstrating the growth of vertically aligned GaAs nanowires on graphite and few-layer graphene by the self-catalyzed vapor-liquid-solid technique using molecular beam epitaxy. A two-temperature growth strategy was used to increase the nanowire density. Due to the self-catalyzed growth technique used, the nanowires were found to have a regular hexagonal cross-sectional shape, and are uniform in length and diameter. Electron microscopy studies reveal an epitaxial relationship of the grown nanowires with the underlying graphitic substrates. Two relative orientations of the nanowire side-facets were observed, which is well explained by the proposed atomic model. A prototype of a single GaAs nanowire photodetector demonstrates a high-quality material. With GaAs being a model system, as well as a very useful material for various optoelectronic applications, we anticipate this particular GaAs nanowire/graphene hybrid to be promising for flexible and low-cost solar cells.

  19. Spray-assisted alignment of Layer-by-Layer assembled silver nanowires: a general approach for the preparation of highly anisotropic nano-composite films.

    Science.gov (United States)

    Hu, H; Pauly, M; Felix, O; Decher, G

    2017-01-19

    The present article focuses on the build-up and the properties of oriented silver nanowire monolayer films and Layer-by-Layer assembled multilayer films. We describe the template-free oriented spray-assisted assembly of silver nanowires at solid/air-interfaces using Grazing Incidence Spraying, a simple and versatile approach that allows the formation of highly oriented thin films with a tunable density and in-plane orientation. Depending on the spraying conditions the nematic order parameter, which describes the angular spread of misaligned nanowires, can be as high as 0.98 (a value of 1.00 corresponding to a perfectly parallel alignment). The combination with the Layer-by-Layer assembly allows building multilayer thin films possessing in-plane anisotropy. In order to demonstrate that the local alignment does not cancel out on the macroscopic scale but leads to direction-dependent properties, we use linearly polarized UV-Vis-NIR spectroscopy to probe the selective excitation of the transverse and longitudinal localized plasmon resonances of the nanowires. The polarization efficiency of the thin films increases strongly with the in-plane density, the degree of orientation, and the number of silver nanowire layers. Multilayer films containing 4 layers of nanowires oriented in the same direction reach a polarization efficiency of up to 97% in the near-infrared region.

  20. Mobile Augmented Reality as a Feature for Self-Oriented, Blended Learning in Medicine: Randomized Controlled Trial

    Science.gov (United States)

    2017-01-01

    Background Advantages of mobile Augmented Reality (mAR) application-based learning versus textbook-based learning were already shown in a previous study. However, it was unclear whether the augmented reality (AR) component was responsible for the success of the self-developed app or whether this was attributable to the novelty of using mobile technology for learning. Objective The study’s aim was to test the hypothesis whether there is no difference in learning success between learners who employed the mobile AR component and those who learned without it to determine possible effects of mAR. Also, we were interested in potential emotional effects of using this technology. Methods Forty-four medical students (male: 25, female: 19, mean age: 22.25 years, standard deviation [SD]: 3.33 years) participated in this study. Baseline emotional status was evaluated using the Profile of Mood States (POMS) questionnaire. Dermatological knowledge was ascertained using a single choice (SC) test (10 questions). The students were randomly assigned to learn 45 min with either a mobile learning method with mAR (group A) or without AR (group B). Afterwards, both groups were again asked to complete the previous questionnaires. AttrakDiff 2 questionnaires were used to evaluate the perceived usability as well as pragmatic and hedonic qualities. For capturing longer term effects, after 14 days, all participants were again asked to complete the SC questionnaire. All evaluations were anonymous, and descriptive statistics were calculated. For hypothesis testing, an unpaired signed-rank test was applied. Results For the SC tests, there were only minor differences, with both groups gaining knowledge (average improvement group A: 3.59 [SD 1.48]; group B: 3.86 [SD 1.51]). Differences between both groups were statistically insignificant (exact Mann Whitney U, U=173.5; P=.10; r=.247). However, in the follow-up SC test after 14 days, group A had retained more knowledge (average decrease of the

  1. Mobile Augmented Reality as a Feature for Self-Oriented, Blended Learning in Medicine: Randomized Controlled Trial.

    Science.gov (United States)

    Noll, Christoph; von Jan, Ute; Raap, Ulrike; Albrecht, Urs-Vito

    2017-09-14

    Advantages of mobile Augmented Reality (mAR) application-based learning versus textbook-based learning were already shown in a previous study. However, it was unclear whether the augmented reality (AR) component was responsible for the success of the self-developed app or whether this was attributable to the novelty of using mobile technology for learning. The study's aim was to test the hypothesis whether there is no difference in learning success between learners who employed the mobile AR component and those who learned without it to determine possible effects of mAR. Also, we were interested in potential emotional effects of using this technology. Forty-four medical students (male: 25, female: 19, mean age: 22.25 years, standard deviation [SD]: 3.33 years) participated in this study. Baseline emotional status was evaluated using the Profile of Mood States (POMS) questionnaire. Dermatological knowledge was ascertained using a single choice (SC) test (10 questions). The students were randomly assigned to learn 45 min with either a mobile learning method with mAR (group A) or without AR (group B). Afterwards, both groups were again asked to complete the previous questionnaires. AttrakDiff 2 questionnaires were used to evaluate the perceived usability as well as pragmatic and hedonic qualities. For capturing longer term effects, after 14 days, all participants were again asked to complete the SC questionnaire. All evaluations were anonymous, and descriptive statistics were calculated. For hypothesis testing, an unpaired signed-rank test was applied. For the SC tests, there were only minor differences, with both groups gaining knowledge (average improvement group A: 3.59 [SD 1.48]; group B: 3.86 [SD 1.51]). Differences between both groups were statistically insignificant (exact Mann Whitney U, U=173.5; P=.10; r=.247). However, in the follow-up SC test after 14 days, group A had retained more knowledge (average decrease of the number of correct answers group A: 0

  2. Superconductivity in nanowires

    CERN Document Server

    Bezryadin, Alexey

    2012-01-01

    The importance and actuality of nanotechnology is unabated and will be for years to come. A main challenge is to understand the various properties of certain nanostructures, and how to generate structures with specific properties for use in actual applications in Electrical Engineering and Medicine.One of the most important structures are nanowires, in particular superconducting ones. They are highly promising for future electronics, transporting current without resistance and at scales of a few nanometers. To fabricate wires to certain defined standards however, is a major challenge, and so i

  3. Radiation Stability of Metal Nanowires

    Science.gov (United States)

    Bedin, S. A.; Makhin'ko, F. F.; Ovchinnikov, V. V.; Gerasimenko, N. N.; Zagorskiy, D. L.

    2017-01-01

    The aim of this work is to investigate the radiation stability of pure nickel and iron- nickel Fe0.56Ni0.44 alloy nanowires fabricated by matrix synthesis using polymer track membranes and Ar+ and Xe+ (E = 20 keV, j = 300 μA/cm2) beam irradiation. The dependence of the stability of nanowires on their diameter, fluence, and type of implanted ions is investigated. The assumption that the thermalized regions of dense cascades of atomic displacements (thermal spikes) play an important role in the nanowire structure change is made. These regions are nanosized zones of explosive energy release and heated to several thousands of degrees.

  4. Semiconductor nanowires and nanowire heterostructures: Nanoscience from the bottom up

    Science.gov (United States)

    Zhong, Zhaohui

    2005-07-01

    Nanoscale science and technology involves interdisciplinary research at the interface of chemistry, physics, biology, and engineering sciences. By developing and following a unique intellectual path---the bottom-up paradigm of nanoscale science and technology---it is possible to assemble integrated nanoscale systems with novel functionalities beyond the conventional lithography limit. In this thesis, I present research efforts focused on fundamental aspects of this bottom-up paradigm using semiconductor nanowires (NWs) and nanowire heterostructures as nanoscale building blocks. We first present studies conducted on one of the most important semiconductor materials, silicon nanowires (SiNWs). SiNWs are rationally synthesized via a metal cluster-catalyzed vapor-liquid-solid (VLS) growth mechanism. Room temperature electrical transport studies carried out on SiNW field effect transistors (FETs) show exceptional device performance; estimated hole mobilities in p-SiNWs are significantly higher than bulk silicon at similar doping levels. Furthermore, low temperature transport studies on molecular scale SiNWs reveal phase coherent single charge transport through discrete single particle quantum levels with length scales up to several hundred nanometers. Finally, we show that SiNWs can be assembled into functional nanoelectronic devices. We then discuss two types of nanowire heterostructures: modulation doped silicon nanowires, and branched and hyper-branched nanowire structures. All key properties of modulation doped nanowires can be controlled during the synthesis, including the number, size and periodicity of the differentially doped regions. Their potential applications are also discussed. Moreover, branched and hyper-branched nanowire structures are synthesized via a multi-step nanocluster-catalyzed VLS approach, with branch density controlled by the nanocluster catalyst concentration. Lastly, we describe the realization of complementary doping in gallium nitride

  5. Interactions between semiconductor nanowires and living cells.

    Science.gov (United States)

    Prinz, Christelle N

    2015-06-17

    Semiconductor nanowires are increasingly used for biological applications and their small dimensions make them a promising tool for sensing and manipulating cells with minimal perturbation. In order to interface cells with nanowires in a controlled fashion, it is essential to understand the interactions between nanowires and living cells. The present paper reviews current progress in the understanding of these interactions, with knowledge gathered from studies where living cells were interfaced with vertical nanowire arrays. The effect of nanowires on cells is reported in terms of viability, cell-nanowire interface morphology, cell behavior, changes in gene expression as well as cellular stress markers. Unexplored issues and unanswered questions are discussed.

  6. Impairment-oriented training or Bobath therapy for severe arm paresis after stroke: a single-blind, multicentre randomized controlled trial.

    Science.gov (United States)

    Platz, T; Eickhof, C; van Kaick, S; Engel, U; Pinkowski, C; Kalok, S; Pause, M

    2005-10-01

    To study the effects of augmented exercise therapy time for arm rehabilitation as either Bobath therapy or the impairment-oriented training (Arm BASIS training) in stroke patients with arm severe paresis. Single blind, multicentre randomized control trial. Three inpatient neurorehabilitation centres. Sixty-two anterior circulation ischaemic stroke patients. Random assignment to three group: (A) no augmented exercise therapy time, (B) augmented exercise therapy time as Bobath therapy and (C) augmented exercise therapy time as Arm BASIS training. Fugl-Meyer arm motor score. Secondary measure: Action Research Arm Test (ARA). Ancillary measures: Fugl-Meyer arm sensation and joint motion/pain scores and the Ashworth Scale (elbow flexors). An overall effect of augmented exercise therapy time on Fugl-Meyer scores after four weeks was not corroborated (mean and 95% confidence interval (CI) of change scores: no augmented exercise therapy time (n=20) 8.8, 5.2-12.3; augmented exercise therapy time (n=40) 9.9, 6.8-13.9; p = 0.2657). The group who received the augmented exercise therapy time as Arm BASIS training (n=20) had, however, higher gains than the group receiving the augmented exercise therapy time as Bobath therapy (n=20) (mean and 95% CI of change scores: Bobath 7.2, 2.6-11.8; BASIS 12.6, 8.4-16.8; p = 0.0432). Passive joint motion/pain deteriorated less in the group who received BASIS training (mean and 95% CI of change scores: Bobath -3.2, -5.2 to -1.1; BASIS 0.1, -1.8-2.0; p = 0.0090). ARA, Fugl-Meyer arm sensation, and Ashworth Scale scores were not differentially affected. The augmented exercise therapy time as Arm BASIS training enhanced selective motor control. Type of training was more relevant for recovery of motor control than therapeutic time spent.

  7. Performance of inverted polymer solar cells with randomly oriented ZnO nanorods coupled with atomic layer deposited ZnO

    Science.gov (United States)

    Zafar, Muhammad; Yun, Ju-Young; Kim, Do-Heyoung

    2017-03-01

    Nanostructuring of the electron transport layer (ETL) in organic photovoltaic cells (OPV) is of great interest because it increases the surface area of the cell and electron transport. In this work, hydrothermally grown, randomly oriented, and low areal density ZnO nanorods (NRs) have been adopted as the ETL, and the effect of adding atomic layer deposited (ALD) ZnO on the ZnO NRs on the inverted organic solar cell performance has been investigated. The fabricated inverted organic solar cell with 5-nm-thick ALD-ZnO grown on the ZnO NRs showed the highest power conversion efficiency (PCE) of 3.08%, which is an enhancement of 85% from that of the cell without ALD-ZnO (PCE = 1.67%). The ultrathin ALD-ZnO was found to act as a curing layer of the surface defects on the hydrothermally grown ZnO NRs, resulting in an improvement in photovoltaic performance.

  8. Noninvasive bipolar double-pulsed-field-gradient NMR reveals signatures for pore size and shape in polydisperse, randomly oriented, inhomogeneous porous media.

    Science.gov (United States)

    Shemesh, Noam; Ozarslan, Evren; Adiri, Tal; Basser, Peter J; Cohen, Yoram

    2010-07-28

    Noninvasive characterization of pore size and shape in opaque porous media is a formidable challenge. NMR diffusion-diffraction patterns were found to be exceptionally useful for obtaining such morphological features, but only when pores are monodisperse and coherently placed. When locally anisotropic pores are randomly oriented, conventional diffusion NMR methods fail. Here, we present a simple, direct, and general approach to obtain both compartment size and shape even in such settings and even when pores are characterized by internal field gradients. Using controlled porous media, we show that the bipolar-double-pulsed-field-gradient (bp-d-PFG) methodology yields diffusion-diffraction patterns from which pore size can be directly obtained. Moreover, we show that pore shape, which cannot be obtained by conventional methods, can be directly inferred from the modulation of the signal in angular bp-d-PFG experiments. This new methodology significantly broadens the types of porous media that can be studied using noninvasive diffusion-diffraction NMR.

  9. Oxidation of copper nanowire based transparent electrodes in ambient conditions and their stabilization by encapsulation: application to transparent film heaters

    Science.gov (United States)

    Celle, Caroline; Cabos, Anthony; Fontecave, Thomas; Laguitton, Bruno; Benayad, Anass; Guettaz, Laure; Pélissier, Nathalie; Huong Nguyen, Viet; Bellet, Daniel; Muñoz-Rojas, David; Simonato, Jean-Pierre

    2018-02-01

    Whereas the integration of silver nanowires in functional devices has reached a fair level of maturity, the integration of copper nanowires still remains difficult, mainly due to the intrinsic instability of copper nanowires in ambient conditions. In this paper, copper nanowire based transparent electrodes with good performances (33 Ω sq‑1 associated with 88% transparency) were obtained, and their degradation in different conditions was monitored, in particular by electrical measurements, transmission electron microscopy, x-ray photoelectron spectrometry and Auger electron spectroscopy. Several routes to stabilize the random networks of copper nanowires were evaluated. Encapsulation through laminated barrier film with optical clear adhesive and atmospheric pressure spatial atomic layer deposition were found to be efficient and were used for the fabrication of transparent film heaters.

  10. Surface Passivation of Germanium Nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Adhikari, Hemant; Sun, Shiyu; Pianetta, Piero; Chidsey, Chirstopher E.D.; McIntyre, Paul C.; /SLAC, SSRL

    2005-05-13

    The surface of single crystal, cold-wall CVD-grown germanium nanowires was studied by synchrotron radiation photoemission spectroscopy (SR-PES) and also by conventional XPS. The as-grown germanium nanowires seem to be hydrogen terminated. Exposure to laboratory atmosphere leads to germanium oxide growth with oxidation states of Ge{sup 1+}, Ge{sup 2+}, Ge{sup 3+}, while exposure to UV light leads to a predominance of the Ge{sup 4+} oxidation state. Most of the surface oxide could be removed readily by aqueous HF treatment which putatively leaves the nanowire surface hydrogen terminated with limited stability in air. Alternatively, chlorine termination could be achieved by aq. HCl treatment of the native oxide-coated nanowires. Chlorine termination was found to be relatively more stable than the HF-last hydrogen termination.

  11. Ballistic superconductivity in semiconductor nanowires

    NARCIS (Netherlands)

    Zhang, H.; Gül, Ö.; Conesa-Boj, S.; Nowak, M.P.; Wimmer, M.; Zuo, K.; Mourik, V.; Vries, F.K. de; Veen, J. van; Moor, M.W.A. de; Bommer, J.D.S.; Woerkom, D.J. van; Car, D.; Plissard, S.R.; Bakkers, E.P.A.M.; Quintero Pérez, M.; Cassidy, M.C.; Koelling, S.; Goswami, S.; Watanabe, K.; Taniguchi, T.; Kouwenhoven, L.P.

    2017-01-01

    Semiconductor nanowires have opened new research avenues in quantum transport owing to their confined geometry and electrostatic tunability. They have offered an exceptional testbed for superconductivity, leading to the realization of hybrid systems combining the macroscopic quantum properties of

  12. Nonlinear optics in photonic nanowires.

    Science.gov (United States)

    Foster, Mark A; Turner, Amy C; Lipson, Michal; Gaeta, Alexander L

    2008-01-21

    We review recent research on nonlinear optical interactions in waveguides with sub-micron transverse dimensions, which are termed photonic nanowires. Such nanowaveguides, fabricated from glasses or semiconductors, provide the maximal confinement of light for index guiding structures enabling large enhancement of nonlinear interactions and group-velocity dispersion engineering. The combination of these two properties make photonic nanowires ideally suited for many nonlinear optical applications including the generation of single-cycle pulses and optical processing with sub-mW powers.

  13. Characterization of superconducting nanowire single-photon detector with artificial constrictions

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Ling; Liu, Dengkuan; Wu, Junjie; He, Yuhao; Lv, Chaolin [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, 865 Changning Road, Shanghai 200050 (China); Graduate University of the Chinese Academy of Sciences, Beijing 100049 (China); You, Lixing, E-mail: lxyou@mail.sim.ac.cn; Zhang, Weijun; Zhang, Lu; Liu, Xiaoyu; Wang, Zhen, E-mail: zwang@mail.sim.ac.cn; Xie, Xiaoming [State Key Laboratory of Functional Materials for Informatics, Shanghai Institute of Microsystem and Information Technology, Chinese Academy of Sciences, 865 Changning Road, Shanghai 200050 (China)

    2014-06-15

    Statistical studies on the performance of different superconducting nanowire single-photon detectors (SNSPDs) on one chip suggested that random constrictions existed in the nanowire that were barely registered by scanning electron microscopy. With the aid of advanced e-beam lithography, artificial geometric constrictions were fabricated on SNSPDs as well as single nanowires. In this way, we studied the influence of artificial constrictions on SNSPDs in a straight forward manner. By introducing artificial constrictions with different wire widths in single nanowires, we concluded that the dark counts of SNSPDs originate from a single constriction. Further introducing artificial constrictions in SNSPDs, we studied the relationship between detection efficiency and kinetic inductance and the bias current, confirming the hypothesis that constrictions exist in SNSPDs.

  14. Controlling the length and location of in situ formed nanowires by means of microfluidic tools.

    Science.gov (United States)

    Kuhn, Phillip; Puigmartí-Luis, Josep; Imaz, Inhar; Maspoch, Daniel; Dittrich, Petra S

    2011-02-21

    Progress in microelectronics, sensors and optics is strongly dependent on the miniaturization of components, and the integration of nanoscale structures into applicable systems. In this regard, conventional top-down technologies such as lithography have limits concerning the dimensions and the choice of material. Therefore, several bottom-up approaches have been investigated to satisfy the need for structures with large aspect ratios in the nanometre regime. For further implementation, however, it is crucial to find methods to define position, orientation and length of the nanowires. In this study, we present a microchip to trap in situ formed bundles of nanowires in microsized cages and clamps, thereby enabling immobilisation, positioning and cutting-out of desired lengths. The microchip consists of two layers, one of which enables the formation of metal-organic nanowires at the interface of two co-flowing laminar streams. The other layer, separated by a thin and deflectable PDMS membrane, serves as the pneumatic control layer to impress microsized features ("donuts") onto the nanowires. In this way, a piece of the nanowire bundle with a prescribed length is immobilised inside the donut. Furthermore, partly open ring-shaped structures enabled trapping of hybrid wires and subsequent functionalisation with fluorescent beads. We believe that the method is a versatile approach to form and modify nanoscale structures via microscale tools, thereby enabling the construction of fully functional nanowire-based systems.

  15. Nucleation and formation of Au-catalyzed ZnTe nanowires on (0 0 1) GaAs by MBE: From planar to out-of-plane growth

    Science.gov (United States)

    Volobuev, V. V.; Groiss, H.; Halilovic, A.; Steiner, H.; Khiar, A.; Hesser, G.; Springholz, G.

    2017-11-01

    The growth evolution of gold-catalyzed ZnTe nanowire condensates on (0 0 1) GaAs substrates is studied. The samples are obtained by molecular beam epitaxy. The growth of nanowires has been monitored in situ by RHEED and investigated ex-situ by TEM, SEM, XRD. In addition to nanowires sticking out of surface in 〈 1 1 1 〉 direction, formation ZnTe thin film is observed. It is found, that formation of the nanowire condensate occurs in three stages. At the initial stage of growth planar nanowires form and continue to grow in 〈 1 1 0 〉 direction until their intersection occurs. After the intersection, nanowires change the growth direction from planar to out-of-plane. At the final stage of growth in-plane nanowires coalescence forming a thin film. In addition to main reflections from ZnTe nanowires some oriented spots and rings have been observed on RHEED patterns. We attribute these spots to twin formation in nanowires and rings to a presence of disoriented domains in ZnTe film condensates.

  16. Crystallographically driven magnetic behaviour of arrays of monocrystalline Co nanowires

    KAUST Repository

    Ivanov, Yurii P.

    2014-11-07

    Cobalt nanowires, 40 nm in diameter and several micrometers long, have been grown by controlled electrodeposition into ordered anodic alumina templates. The hcp crystal symmetry is tuned by a suitable choice of the electrolyte pH (between 3.5 and 6.0) during growth. Systematic high resolution transmission electron microscopy imaging and analysis of the electron diffraction patterns reveals a dependence of crystal orientation from electrolyte pH. The tailored modification of the crystalline signature results in the reorientation of the magnetocrystalline anisotropy and increasing experimental coercivity and squareness with decreasing polar angle of the \\'c\\' growth axis. Micromagnetic modeling of the demagnetization process and its angular dependence is in agreement with the experiment and allows us to establish the change in the character of the magnetization reversal: from quasi-curling to vortex domain wall propagation modes when the crystal \\'c\\' axis tilts more than 75° in respect to the nanowire axis.

  17. Electrochemically grown rough-textured nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Tyagi, Pawan; Postetter, David; Saragnese, Daniel [Johns Hopkins University, Department of Chemical and Biomolecular Engineering (United States); Papadakis, Stergios J. [Johns Hopkins University, Applied Physics Laboratory (United States); Gracias, David H., E-mail: dgracias@jhu.ed [Johns Hopkins University, Department of Chemical and Biomolecular Engineering (United States)

    2010-03-15

    Nanowires with a rough surface texture show unusual electronic, optical, and chemical properties; however, there are only a few existing methods for producing these nanowires. Here, we describe two methods for growing both free standing and lithographically patterned gold (Au) nanowires with a rough surface texture. The first strategy is based on the deposition of nanowires from a silver (Ag)-Au plating solution mixture that precipitates an Ag-Au cyanide complex during electrodeposition at low current densities. This complex disperses in the plating solution, thereby altering the nanowire growth to yield a rough surface texture. These nanowires are mass produced in alumina membranes. The second strategy produces long and rough Au nanowires on lithographically patternable nickel edge templates with corrugations formed by partial etching. These rough nanowires can be easily arrayed and integrated with microscale devices.

  18. Optical second harmonic generation from Pt nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Hayashi, N.; Aratake, K.; Okushio, R.; Iwai, T. [Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Nomi, Ishikawa 923-1292 (Japan); Sugawara, A. [Hitachi Advanced Research Laboratory, Akanuma 2520, Hatoyama, Saitama 350-0395 (Japan); Sano, H. [Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Nomi, Ishikawa 923-1292 (Japan); Mizutani, G. [Japan Advanced Institute of Science and Technology, 1-1 Asahidai, Nomi, Ishikawa 923-1292 (Japan)], E-mail: mizutani@jaist.ac.jp

    2007-09-15

    We have measured optical second harmonic intensity from arrays of Pt nanowires of 20 nm and 9 nm average widths, as a function of the incident and output light polarizations, the azimuthal angle, and the excitation photon energy. The nanowires were fabricated through shadow deposition on self-organized NaCl(1 1 0) faceted templates. The anisotropy of the SH intensity from the Pt nanowires was found to be stronger than that from the Au nanowires reported previously. The effective nonlinear susceptibility element {chi}{sub 222}{sup (2)}, with the suffix 2 indicating the direction [11-bar0], was observed for Pt nanowires, although it was not observed for Au nanowires. This difference is suggested to be due to the weaker suppression of the incident fundamental fields by the depolarization field in the Pt nanowires and the larger anisotropy in the nonlinearity of Pt nanowires due to the thinner widths.

  19. A silicon nanowire heater and thermometer

    Science.gov (United States)

    Zhao, Xingyan; Dan, Yaping

    2017-07-01

    In the thermal conductivity measurements of thermoelectric materials, heaters and thermometers made of the same semiconducting materials under test, forming a homogeneous system, will significantly simplify fabrication and integration. In this work, we demonstrate a high-performance heater and thermometer made of single silicon nanowires (SiNWs). The SiNWs are patterned out of a silicon-on-insulator wafer by CMOS-compatible fabrication processes. The electronic properties of the nanowires are characterized by four-probe and low temperature Hall effect measurements. The I-V curves of the nanowires are linear at small voltage bias. The temperature dependence of the nanowire resistance allows the nanowire to be used as a highly sensitive thermometer. At high voltage bias, the I-V curves of the nanowire become nonlinear due to the effect of Joule heating. The temperature of the nanowire heater can be accurately monitored by the nanowire itself as a thermometer.

  20. Structural and tunneling properties of Si nanowires

    KAUST Repository

    Montes Muñoz, Enrique

    2013-12-06

    We investigate the electronic structure and electron transport properties of Si nanowires attached to Au electrodes from first principles using density functional theory and the nonequilibrium Green\\'s function method. We systematically study the dependence of the transport properties on the diameter of the nanowires, on the growth direction, and on the length. At the equilibrium Au-nanowire distance we find strong electronic coupling between the electrodes and nanowires, which results in a low contact resistance. With increasing nanowire length we study the transition from metallic to tunneling conductance for small applied bias. For the tunneling regime we investigate the decay of the conductance with the nanowire length and rationalize the results using the complex band structure of the pristine nanowires. The conductance is found to depend strongly on the growth direction, with nanowires grown along the ⟨110⟩ direction showing the smallest decay with length and the largest conductance and current.

  1. Reversible cyclic deformation mechanism of gold nanowires by twinning-detwinning transition evidenced from in situ TEM

    Science.gov (United States)

    Lee, Subin; Im, Jiseong; Yoo, Youngdong; Bitzek, Erik; Kiener, Daniel; Richter, Gunther; Kim, Bongsoo; Oh, Sang Ho

    2014-01-01

    Mechanical response of metal nanowires has recently attracted a lot of interest due to their ultra-high strengths and unique deformation behaviours. Atomistic simulations have predicted that face-centered cubic metal nanowires deform in different modes depending on the orientation between wire axis and loading direction. Here we report, by combination of in situ transmission electron microscopy and molecular dynamic simulation, the conditions under which particular deformation mechanisms take place during the uniaxial loading of [110]-oriented Au nanowires. Furthermore, by performing cyclic uniaxial loading, we show reversible plastic deformation by twinning and consecutive detwinning in tension and compression, respectively. Molecular dynamics simulations rationalize the observed behaviours in terms of the orientation-dependent resolved shear stress on the leading and trailing partial dislocations, their potential nucleation sites and energy barriers. This reversible twinning-detwinning process accommodates large strains that can be beneficially utilized in applications requiring high ductility in addition to ultra-high strength.

  2. Single-crystal vanadium pentoxide nanowires.

    Science.gov (United States)

    Gao, Shaokang; Chen, Yuzhen; Luo, Haiyan; Jiang, Lilong; Ye, Binghuo; Wei, Mingdeng; Wei, Kemei

    2008-07-01

    Single-crystal V2O5 nanowires were successfully synthesized from the starting materials V6O13 powder and water. The experimental results indicate that high purity nanowires can be obtained using this simple synthetic route in absence of templates or catalysts. The diameter of the nanowires was found to be ca. 20 approximately 60 nm and the length up to several tens of micrometers, and the phases of nanowires were determined by XRD and TEM measurements.

  3. Semiconducting silicon nanowires for biomedical applications

    CERN Document Server

    Coffer, JL

    2014-01-01

    Biomedical applications have benefited greatly from the increasing interest and research into semiconducting silicon nanowires. Semiconducting Silicon Nanowires for Biomedical Applications reviews the fabrication, properties, and applications of this emerging material. The book begins by reviewing the basics, as well as the growth, characterization, biocompatibility, and surface modification, of semiconducting silicon nanowires. It goes on to focus on silicon nanowires for tissue engineering and delivery applications, including cellular binding and internalization, orthopedic tissue scaffol

  4. Fabry Perot phenomena in nanowire cavities

    Science.gov (United States)

    Tomczyk, Michelle; Cheng, Guanglei; Lu, Shicheng; Veazey, Joshua; Huang, Mengchen; Irvin, Patrick; Lee, Hyungwoo; Ryu, Sangwoo; Eom, Chang-Beom; Levy, Jeremy

    2015-03-01

    A solid-state geometry analogous to an optical Fabry-Perot cavity gives evidence for coherent transport on the order of microns through nanowires at the LaAlO3/SrTiO3 (LAO/STO) interface. Conductive AFM lithography is used to create both the nanowires and the two confining barriers which define the cavity. These two barriers act as the primary scattering centers so that as the chemical potential is tuned through the conducting state of the device, partial reflections from the barriers interfere in the cavity, resulting in quasi-periodic oscillations of the conductance at low temperatures. Full and extended single-mode periodicity is not observed in all devices; however, the conductance oscillations are only observed in cavity structures, suggesting that the effects of the two manufactured barriers dominate over any random scattering sites from disorder. The conductance oscillations from interference of coherently scattered electrons give evidence for ballistic transport on much longer length scales than implied by mobility measurements in two-dimensional LAO/STO. We gratefully acknowledge financial support from ARO (W911NF-08-1-0317), AFOSR (FA9550-10-1-0524 and FA9550-12-1-0342), and NSF (DMR-1104191, DMR-1124131, and DMR-1234096).

  5. Nanowire resonant tunneling diodes

    Science.gov (United States)

    Björk, M. T.; Ohlsson, B. J.; Thelander, C.; Persson, A. I.; Deppert, K.; Wallenberg, L. R.; Samuelson, L.

    2002-12-01

    Semiconductor heterostructures and their implementation into electronic and photonic devices have had tremendous impact on science and technology. In the development of quantum nanoelectronics, one-dimensional (1D) heterostructure devices are receiving a lot of interest. We report here functional 1D resonant tunneling diodes obtained via bottom-up assembly of designed segments of different semiconductor materials in III/V nanowires. The emitter, collector, and the central quantum dot are made from InAs and the barrier material from InP. Ideal resonant tunneling behavior, with peak-to-valley ratios of up to 50:1 and current densities of 1 nA/μm2 was observed at low temperatures.

  6. Corrosion detection of nanowires by magnetic sensors

    KAUST Repository

    Kosel, Jürgen

    2017-10-05

    Disclosed are various embodiments related to a corrosion detection device for detecting corrosive environments. A corrosion detection device comprises a magnetic sensor and at least one magnetic nanowire disposed on the magnetic sensor. The magnetic sensor is configured to detect corrosion of the one or more magnetic nanowires based at least in part on a magnetic field of the one or more magnetic nanowires.

  7. Arm rehabilitation in post stroke subjects: A randomized controlled trial on the efficacy of myoelectrically driven FES applied in a task-oriented approach.

    Science.gov (United States)

    Jonsdottir, Johanna; Thorsen, Rune; Aprile, Irene; Galeri, Silvia; Spannocchi, Giovanna; Beghi, Ettore; Bianchi, Elisa; Montesano, Angelo; Ferrarin, Maurizio

    2017-01-01

    Motor recovery of persons after stroke may be enhanced by a novel approach where residual muscle activity is facilitated by patient-controlled electrical muscle activation. Myoelectric activity from hemiparetic muscles is then used for continuous control of functional electrical stimulation (MeCFES) of same or synergic muscles to promote restoration of movements during task-oriented therapy (TOT). Use of MeCFES during TOT may help to obtain a larger functional and neurological recovery than otherwise possible. Multicenter randomized controlled trial. Eighty two acute and chronic stroke victims were recruited through the collaborating facilities and after signing an informed consent were randomized to receive either the experimental (MeCFES assisted TOT (M-TOT) or conventional rehabilitation care including TOT (C-TOT). Both groups received 45 minutes of rehabilitation over 25 sessions. Outcomes were Action Research Arm Test (ARAT), Upper Extremity Fugl-Meyer Assessment (FMA-UE) scores and Disability of the Arm Shoulder and Hand questionnaire. Sixty eight subjects completed the protocol (Mean age 66.2, range 36.5-88.7, onset months 12.7, range 0.8-19.1) of which 45 were seen at follow up 5 weeks later. There were significant improvements in both groups on ARAT (median improvement: MeCFES TOT group 3.0; C-TOT group 2.0) and FMA-UE (median improvement: M-TOT 4.5; C-TOT 3.5). Considering subacute subjects (time since stroke < 6 months), there was a trend for a larger proportion of improved patients in the M-TOT group following rehabilitation (57.9%) than in the C-TOT group (33.2%) (difference in proportion improved 24.7%; 95% CI -4.0; 48.6), though the study did not meet the planned sample size. This is the first large multicentre RCT to compare MeCFES assisted TOT with conventional care TOT for the upper extremity. No adverse events or negative outcomes were encountered, thus we conclude that MeCFES can be a safe adjunct to rehabilitation that could promote recovery of

  8. Arm rehabilitation in post stroke subjects: A randomized controlled trial on the efficacy of myoelectrically driven FES applied in a task-oriented approach.

    Directory of Open Access Journals (Sweden)

    Johanna Jonsdottir

    Full Text Available Motor recovery of persons after stroke may be enhanced by a novel approach where residual muscle activity is facilitated by patient-controlled electrical muscle activation. Myoelectric activity from hemiparetic muscles is then used for continuous control of functional electrical stimulation (MeCFES of same or synergic muscles to promote restoration of movements during task-oriented therapy (TOT. Use of MeCFES during TOT may help to obtain a larger functional and neurological recovery than otherwise possible.Multicenter randomized controlled trial.Eighty two acute and chronic stroke victims were recruited through the collaborating facilities and after signing an informed consent were randomized to receive either the experimental (MeCFES assisted TOT (M-TOT or conventional rehabilitation care including TOT (C-TOT. Both groups received 45 minutes of rehabilitation over 25 sessions. Outcomes were Action Research Arm Test (ARAT, Upper Extremity Fugl-Meyer Assessment (FMA-UE scores and Disability of the Arm Shoulder and Hand questionnaire.Sixty eight subjects completed the protocol (Mean age 66.2, range 36.5-88.7, onset months 12.7, range 0.8-19.1 of which 45 were seen at follow up 5 weeks later. There were significant improvements in both groups on ARAT (median improvement: MeCFES TOT group 3.0; C-TOT group 2.0 and FMA-UE (median improvement: M-TOT 4.5; C-TOT 3.5. Considering subacute subjects (time since stroke < 6 months, there was a trend for a larger proportion of improved patients in the M-TOT group following rehabilitation (57.9% than in the C-TOT group (33.2% (difference in proportion improved 24.7%; 95% CI -4.0; 48.6, though the study did not meet the planned sample size.This is the first large multicentre RCT to compare MeCFES assisted TOT with conventional care TOT for the upper extremity. No adverse events or negative outcomes were encountered, thus we conclude that MeCFES can be a safe adjunct to rehabilitation that could promote recovery

  9. Nuclear magnetic relaxation induced by exchange-mediated orientational randomization: Longitudinal relaxation dispersion for a dipole-coupled spin-1/2 pair

    Science.gov (United States)

    Chang, Zhiwei; Halle, Bertil

    2013-10-01

    In complex biological or colloidal samples, magnetic relaxation dispersion (MRD) experiments using the field-cycling technique can characterize molecular motions on time scales ranging from nanoseconds to microseconds, provided that a rigorous theory of nuclear spin relaxation is available. In gels, cross-linked proteins, and biological tissues, where an immobilized macromolecular component coexists with a mobile solvent phase, nuclear spins residing in solvent (or cosolvent) species relax predominantly via exchange-mediated orientational randomization (EMOR) of anisotropic nuclear (electric quadrupole or magnetic dipole) couplings. The physical or chemical exchange processes that dominate the MRD typically occur on a time scale of microseconds or longer, where the conventional perturbation theory of spin relaxation breaks down. There is thus a need for a more general relaxation theory. Such a theory, based on the stochastic Liouville equation (SLE) for the EMOR mechanism, is available for a single quadrupolar spin I = 1. Here, we present the corresponding theory for a dipole-coupled spin-1/2 pair. To our knowledge, this is the first treatment of dipolar MRD outside the motional-narrowing regime. Based on an analytical solution of the spatial part of the SLE, we show how the integral longitudinal relaxation rate can be computed efficiently. Both like and unlike spins, with selective or non-selective excitation, are treated. For the experimentally important dilute regime, where only a small fraction of the spin pairs are immobilized, we obtain simple analytical expressions for the auto-relaxation and cross-relaxation rates which generalize the well-known Solomon equations. These generalized results will be useful in biophysical studies, e.g., of intermittent protein dynamics. In addition, they represent a first step towards a rigorous theory of water 1H relaxation in biological tissues, which is a prerequisite for unravelling the molecular basis of soft

  10. Growth and properties of In(Ga)As nanowires on silicon

    Energy Technology Data Exchange (ETDEWEB)

    Hertenberger, Simon

    2012-10-15

    In this thesis the integration of III-V semiconductor nanowires on silicon (Si) platform by molecular beam epitaxy (MBE) is investigated. All nanowires are grown without the use of foreign catalysts such as Au to achieve high purity material. First, InAs nanowires are grown in a self-assembled manner on SiO{sub x}-masked Si(111) where pinholes in the silicon oxide serve as nucleation spots for the nanowires. This leads to the growth of vertically aligned, (111)-oriented nanowires with hexagonal cross-section. Based on this simple process, the entire growth parameter window is investigated for InAs nanowires, revealing an extremely large growth temperature range from 380 C to 580 C and growth rates as large as 6 μ/h. Complex quantitative in-situ line-of-sight quadrupole mass spectrometry experiments during nanowire growth and post-growth thermal decomposition studies support these findings and indicate a very high thermal stability up to >540 C for InAs nanowires. Furthermore, the influence of the As/In ratio on the nanowire growth is studied revealing two distinct growth regimes, i.e., an In-rich regime for lower As fluxes and an As-rich regime for larger As fluxes, where the latter shows characteristic saturation of the nanowire aspect ratio. For the catalyst-free growth, detailed investigation of the growth mechanism is performed via a combination of in-situ reflection high-energy electron diffraction (RHEED) and ex-situ scanning and transmission electron microscopy (SEM,TEM). An abrupt onset of nanowire growth is observed in RHEED intensity and in-plane lattice parameter evolution. Furthermore, completely droplet-free nanowires, continuous radial growth, constant vertical growth rate and growth interruption experiments suggest a vapor-solid growth mode for all investigated nanowire samples. Moreover, site-selective (positioned) growth of InAs nanowires on pre-patterned SiO{sub 2} masked Si(111) substrates is demonstrated which is needed for ultimate control of

  11. Catalyst-free III-nitride Nanowires by Plasma-assisted Molecular Beam Epitaxy: Growth, Characterization, and Applications

    Science.gov (United States)

    Carnevale, Santino D.

    In the past twenty years, III-nitride devices have had an enormous impact on semiconductor-based technologies. This impact is seen in both optoelectronic and electronic devices. The aim of this dissertation is to take advantage of III-nitride nanowires grown by plasma-assisted molecular beam epitaxy to form heterostructures that are difficult or impossible to achieve in traditional, thin films. To do this, it is first necessary to establish the growth phase diagrams that correlate the characteristics of GaN nanowires to MBE growth conditions. By using the information in these growth maps we can control growth kinetics and the resulting nanowire structures by making strategic, timely changes to growth conditions. Using this control electronic and optoelectronic III-nitride nanowire devices are created. First, coaxially-oriented AlN/GaN nanowire resonant tunneling diodes are formed on Si substrates. Second, polarization-induced nanowire light emitting diodes (PINLEDs) are fabricated that exhibit electroluminescence at wavelengths from the deep UV into the visible. Because these PINLEDs utilize polarization doping, they can be formed with and without the use of dopants. Device and structural characterization are provided, including a detailed investigation of the mixed material polarity in these nanowires. Finally, the dissertation closes with a discussion of recent work and future ideas for optimizing the PINLED design.

  12. Quantum dots and tunnel barriers in InAs/InP nanowire heterostructures: Electronic and optical properties

    Science.gov (United States)

    Niquet, Yann-Michel; Mojica, Dulce Camacho

    2008-03-01

    We compute the structural and electronic properties of ⟨111⟩-oriented InAs/InP nanowire heterostructures using Keating’s valence force field and a tight-binding model. We focus on the optical properties (exciton energies and polarization) of InAs quantum dots embedded in InP nanowires and on the height of InP and InAsP tunnel barriers embedded in InAs nanowires. We show that InAs quantum dots exhibit bright optical transitions, at variance with the highly mismatched InAs/GaAs nanowire heterostructures. The polarization of the photons is perpendicular to the nanowire for thin InAs layers but rotates parallel to the nanowire for thick enough ones, as a result of the increasing light-hole character of the exciton. As for tunnel barriers, we show that the residual strains can significantly reduce the conduction band discontinuity in thin InAsP layers. This must be taken into account in the design of nanowire tunneling devices.

  13. Field effect transistors and phototransistors based upon p-type solution-processed PbS nanowires

    Science.gov (United States)

    Giraud, Paul; Hou, Bo; Pak, Sangyeon; Inn Sohn, Jung; Morris, Stephen; Cha, SeungNam; Kim, Jong Min

    2018-02-01

    We demonstrate the fabrication of solution processed highly crystalline p-type PbS nanowires via the oriented attachment of nanoparticles. The analysis of single nanowire field effect transistor (FET) devices revealed a hole conduction behaviour with average mobilities greater than 30 cm2 V‑1 s‑1, which is an order of magnitude higher than that reported to date for p-type PbS colloidal nanowires. We have investigated the response of the FETs to near-infrared light excitation and show herein that the nanowires exhibited gate-dependent photo-conductivities, enabling us to tune the device performances. The responsivity was found to be greater than 104 A W‑1 together with a detectivity of 1013 Jones, which benefits from a photogating effect occurring at negative gate voltages. These encouraging detection parameters are accompanied by relatively short switching times of 15 ms at positive gate voltages, resulting from a combination of the standard photoconduction and the high crystallinity of the nanowires. Collectively, these results indicate that solution-processed PbS nanowires are promising nanomaterials for infrared photodetectors as well as p-type nanowire FETs.

  14. Vertically aligned ZnO-ZnGa2O4 core-shell nanowires: from synthesis to optical properties

    Science.gov (United States)

    Zhong, Miao; Li, Yanbo; Tokizono, Takero; Zheng, Maojun; Yamada, Ichiro; Delaunay, Jean-Jacques

    2012-03-01

    Dense and vertically aligned ZnO-ZnGa2O4 core-shell nanowires were synthesized in large scale on a-plane sapphire substrates by a simple two-step chemical vapor deposition method. The synthesized ZnO-ZnGa2O4 core-shell nanowires were connected through their base by a thick underlayer of the same material realizing electrical contact of the nanostructured array. X-ray diffraction and transmission electron microscopy analyses of the core-shell nanowires reveal that the ZnO cores and ZnGa2O4 shells of the core-shell nanowires are of single-crystal quality and have aligned crystallographic orientations. The ultraviolet-visible diffuse reflectance spectra of the core-shell nanowires showed two sharp edges corresponding to near-band-edge absorption contributed by the ZnO cores and the ZnGa2O4 shells. Moreover, the room-temperature photoluminescence spectra of the core-shell nanowires gave three UV emission peaks coming from the ZnGa2O4 shells and the ZnO cores. The dense and vertically aligned ZnO-ZnGa2O4 core-shell nanowires showing promising photoelectric properties offer an ideal structure for light harvesting applications such as a photoanode in a photoelectrochemical water splitting cell.

  15. Topotaxial growth of α-Fe{sub 2}O{sub 3} nanowires on iron substrate in thermal annealing method

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, Himanshu, E-mail: himsri@rrcat.gov.in; Srivastava, A. K.; Babu, Mahendra; Rai, Sanjay; Ganguli, Tapas [Indus Synchrotrons Utilization Division, Raja Ramanna Centre for Advanced Technology, Indore 452013 (India)

    2016-06-28

    A detail cross-sectional transmission electron microscopy of as-grown α-Fe{sub 2}O{sub 3} nanowire sample, synthesized on iron substrate by thermal annealing method, was carried out to understand the mechanism of growth in this system. Iron undergoes sequential oxidation to form a layered structure of Fe/FeO/Fe{sub 3}O{sub 4}/α-Fe{sub 2}O{sub 3}. α-Fe{sub 2}O{sub 3} nanowires grow on to the top of α-Fe{sub 2}O{sub 3} layer. It was found that subsequent oxide layers grow topotaxially on the grains of iron, which results in a direct orientation relationship between the α-Fe{sub 2}O{sub 3} nanowire and the parent grain of iron. The results also showed that the grains of α-Fe{sub 2}O{sub 3} layer, which were uniquely oriented in [110] direction, undergo highly anisotropic growth to form the nanowire. This anisotropic growth occurs at a twin interface, given by (−11−1), in the α-Fe{sub 2}O{sub 3} layer. It was concluded that the growth at twin interface could be the main driving factor for such anisotropic growth. These observations are not only helpful in understanding the growth mechanism of α-Fe{sub 2}O{sub 3} nanowires, but it also demonstrates a way of patterning the nanowires by controlling the texture of iron substrate.

  16. Micromagnetic simulations of cylindrical magnetic nanowires

    KAUST Repository

    Ivanov, Yurii P.

    2015-05-27

    This chapter reviews micromagnetic simulations of cylindrical magnetic nanowires and their ordered arrays. It starts with a description of the theoretical background of micromagnetism. The chapter discusses main magnetization reversal modes, domain wall types, and state diagrams in cylindrical nanowires of different types and sizes. The results of the hysteresis process in individual nanowires and nanowire arrays also are presented. Modeling results are compared with experimental ones. The chapter also discusses future trends in nanowire applications in relation to simulations, such as current-driven dynamics, spintronics, and spincaloritronics. The main micromagnetic programs are presented and discussed, together with the corresponding links.

  17. Controllable High-Speed Rotation of Nanowires

    Science.gov (United States)

    Fan, D. L.; Zhu, F. Q.; Cammarata, R. C.; Chien, C. L.

    2005-06-01

    We report a versatile method for executing controllable high-speed rotation of nanowires by ac voltages applied to multiple electrodes. The rotation of the nanowires can be instantly switched on or off with precisely controlled rotation speed (to at least 1800 rpm), definite chirality, and total angle of rotation. We have determined the torque due to the fluidic drag force on nanowire of different lengths. We also demonstrate a micromotor using a rotating nanowire driving a dust particle into circular motion. This method has been used to rotate magnetic and nonmagnetic nanowires as well as carbon nanotubes.

  18. Gold nanowires and the effect of impurities

    Directory of Open Access Journals (Sweden)

    Novaes Frederico

    2006-01-01

    Full Text Available AbstractMetal nanowires and in particular gold nanowires have received a great deal of attention in the past few years. Experiments on gold nanowires have prompted theory and simulation to help answer questions posed by these studies. Here we present results of computer simulations for the formation, evolution and breaking of very thin Au nanowires. We also discuss the influence of contaminants, such as atoms and small molecules, and their effect on the structural and mechanical properties of these nanowires.

  19. Enhanced output voltage generation via ZnO nanowires (50 nm): Effect of diameter thinning on voltage enhancement

    Science.gov (United States)

    Ahmad, Mansoor; Iqbal, Muhammad Azhar; Kiely, Janice; Luxton, Richard; Jabeen, Musarrat

    2017-05-01

    50 nm ZnO nanowires were grown on indium tin oxide (ITO) coated poly ethylene terephthalate (PET) substrates by adapting facile aqueous growth technique using low temperature and vacuum conditions. Prior to growth of ZnO nanowires, pure hexagonal wurtzite structured seed layer was grown on flexible substrates. Surface morphology of nanostructure has been examined by scanning electron microscopy (SEM). Vertical growth orientation has been evidenced in XRD patterns. Minute external mechanical force ( 50 nN) has produced periodic voltage peaks. 2.5 nm and 7.5 nm thick sputtered Pt electrode have been tested to obtain output voltages. 50 nm ZnO nanowires has produced a maximum output voltage of 2.717 volts having an output power density of 397.1 mW/cm2. By squeezing the diameter, we have reduced reverse leakage current through nanowires and enhanced output voltage.

  20. Ballistic superconductivity in semiconductor nanowires.

    Science.gov (United States)

    Zhang, Hao; Gül, Önder; Conesa-Boj, Sonia; Nowak, Michał P; Wimmer, Michael; Zuo, Kun; Mourik, Vincent; de Vries, Folkert K; van Veen, Jasper; de Moor, Michiel W A; Bommer, Jouri D S; van Woerkom, David J; Car, Diana; Plissard, Sébastien R; Bakkers, Erik P A M; Quintero-Pérez, Marina; Cassidy, Maja C; Koelling, Sebastian; Goswami, Srijit; Watanabe, Kenji; Taniguchi, Takashi; Kouwenhoven, Leo P

    2017-07-06

    Semiconductor nanowires have opened new research avenues in quantum transport owing to their confined geometry and electrostatic tunability. They have offered an exceptional testbed for superconductivity, leading to the realization of hybrid systems combining the macroscopic quantum properties of superconductors with the possibility to control charges down to a single electron. These advances brought semiconductor nanowires to the forefront of efforts to realize topological superconductivity and Majorana modes. A prime challenge to benefit from the topological properties of Majoranas is to reduce the disorder in hybrid nanowire devices. Here we show ballistic superconductivity in InSb semiconductor nanowires. Our structural and chemical analyses demonstrate a high-quality interface between the nanowire and a NbTiN superconductor that enables ballistic transport. This is manifested by a quantized conductance for normal carriers, a strongly enhanced conductance for Andreev-reflecting carriers, and an induced hard gap with a significantly reduced density of states. These results pave the way for disorder-free Majorana devices.

  1. Polarization-induced pn diodes in wide-band-gap nanowires with ultraviolet electroluminescence.

    Science.gov (United States)

    Carnevale, Santino D; Kent, Thomas F; Phillips, Patrick J; Mills, Michael J; Rajan, Siddharth; Myers, Roberto C

    2012-02-08

    Almost all electronic devices utilize a pn junction formed by random doping of donor and acceptor impurity atoms. We developed a fundamentally new type of pn junction not formed by impurity-doping, but rather by grading the composition of a semiconductor nanowire resulting in alternating p and n conducting regions due to polarization charge. By linearly grading AlGaN nanowires from 0% to 100% and back to 0% Al, we show the formation of a polarization-induced pn junction even in the absence of any impurity doping. Since electrons and holes are injected from AlN barriers into quantum disk active regions, graded nanowires allow deep ultraviolet LEDs across the AlGaN band-gap range with electroluminescence observed from 3.4 to 5 eV. Polarization-induced p-type conductivity in nanowires is shown to be possible even without supplemental acceptor doping, demonstrating the advantage of polarization engineering in nanowires compared with planar films and providing a strategy for improving conductivity in wide-band-gap semiconductors. As polarization charge is uniform within each unit cell, polarization-induced conductivity without impurity doping provides a solution to the problem of conductivity uniformity in nanowires and nanoelectronics and opens a new field of polarization engineering in nanostructures that may be applied to other polar semiconductors. © 2012 American Chemical Society

  2. Sub-Poissonian Narrowing of Length Distributions Realized in Ga-Catalyzed GaAs Nanowires.

    Science.gov (United States)

    Koivusalo, Eero S; Hakkarainen, Teemu V; Guina, Mircea D; Dubrovskii, Vladimir G

    2017-09-13

    Herein, we present experimental data on the record length uniformity within the ensembles of semiconductor nanowires. The length distributions of Ga-catalyzed GaAs nanowires obtained by cost-effective lithography-free technique on silicon substrates systematically feature a pronounced sub-Poissonian character. For example, nanowires with the mean length ⟨L⟩ of 2480 nm show a length distribution variance of only 367 nm(2), which is more than twice smaller than the Poisson variance h⟨L⟩ of 808 nm(2) for this mean length (with h = 0.326 nm as the height of GaAs monolayer). For 5125 nm mean length, the measured variance is 1200 nm(2) against 1671 nm(2) for Poisson distribution. A supporting model to explain the experimental findings is proposed. We speculate that the fluctuation-induced broadening of the length distribution is suppressed by nucleation antibunching, the effect which is commonly observed in individual vapor-liquid-solid nanowires but has never been seen for their ensembles. Without kinetic fluctuations, the two remaining effects contributing to the length distribution width are the nucleation randomness for nanowires emerging from the substrate and the shadowing effect on long enough nanowires. This explains an interesting time evolution of the variance that saturates after a short incubation stage but then starts increasing again due to shadowing, remaining, however, smaller than the Poisson value for a sufficiently long time.

  3. Electrically Injected UV-Visible Nanowire Lasers

    Energy Technology Data Exchange (ETDEWEB)

    Wang, George T.; Li, Changyi; Li, Qiming; Liu, Sheng; Wright, Jeremy Benjamin; Brener, Igal; Luk, Ting -Shan; Chow, Weng W.; Leung, Benjamin; Figiel, Jeffrey J.; Koleske, Daniel D.; Lu, Tzu-Ming

    2015-09-01

    There is strong interest in minimizing the volume of lasers to enable ultracompact, low-power, coherent light sources. Nanowires represent an ideal candidate for such nanolasers as stand-alone optical cavities and gain media, and optically pumped nanowire lasing has been demonstrated in several semiconductor systems. Electrically injected nanowire lasers are needed to realize actual working devices but have been elusive due to limitations of current methods to address the requirement for nanowire device heterostructures with high material quality, controlled doping and geometry, low optical loss, and efficient carrier injection. In this project we proposed to demonstrate electrically injected single nanowire lasers emitting in the important UV to visible wavelengths. Our approach to simultaneously address these challenges is based on high quality III-nitride nanowire device heterostructures with precisely controlled geometries and strong gain and mode confinement to minimize lasing thresholds, enabled by a unique top-down nanowire fabrication technique.

  4. Plasmonic Properties of Vertically Aligned Nanowire Arrays

    Directory of Open Access Journals (Sweden)

    Hua Qi

    2012-01-01

    Full Text Available Nanowires (NWs/Ag sheath composites were produced to investigate plasmonic coupling between vertically aligned NWs for surface-enhanced Raman scattering (SERS applications. In this investigation, two types of vertical NW arrays were studied; those of ZnO NWs grown on nanosphere lithography patterned sapphire substrate via vapor-liquid-solid (VLS mechanism and Si NW arrays produced by wet chemical etching. Both types of vertical NW arrays were coated with a thin layer of silver by electroless silver plating for SERS enhancement studies. The experimental results show extremely strong SERS signals due to plasmonic coupling between the NWs, which was verified by COMSOL electric field simulations. We also compared the SERS enhancement intensity of aligned and random ZnO NWs, indicating that the aligned NWs show much stronger and repeatable SERS signal than those grown in nonaligned geometries.

  5. Tunneling magnetoresistance in Si nanowires

    KAUST Repository

    Montes Muñoz, Enrique

    2016-11-09

    We investigate the tunneling magnetoresistance of small diameter semiconducting Si nanowires attached to ferromagnetic Fe electrodes, using first principles density functional theory combined with the non-equilibrium Green\\'s functions method for quantum transport. Silicon nanowires represent an interesting platform for spin devices. They are compatible with mature silicon technology and their intrinsic electronic properties can be controlled by modifying the diameter and length. Here we systematically study the spin transport properties for neutral nanowires and both n and p doping conditions. We find a substantial low bias magnetoresistance for the neutral case, which halves for an applied voltage of about 0.35 V and persists up to 1 V. Doping in general decreases the magnetoresistance, as soon as the conductance is no longer dominated by tunneling.

  6. III-Nitride nanowire optoelectronics

    Science.gov (United States)

    Zhao, Songrui; Nguyen, Hieu P. T.; Kibria, Md. G.; Mi, Zetian

    2015-11-01

    Group-III nitride nanowire structures, including GaN, InN, AlN and their alloys, have been intensively studied in the past decade. Unique to this material system is that its energy bandgap can be tuned from the deep ultraviolet (~6.2 eV for AlN) to the near infrared (~0.65 eV for InN). In this article, we provide an overview on the recent progress made in III-nitride nanowire optoelectronic devices, including light emitting diodes, lasers, photodetectors, single photon sources, intraband devices, solar cells, and artificial photosynthesis. The present challenges and future prospects of III-nitride nanowire optoelectronic devices are also discussed.

  7. Electrochemical synthesis of multisegmented nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Kok, Kuan-Ying; Ng, Inn-Khuan; Saidin, Nur Ubaidah [Malaysian Nuclear Agency, Bangi, 43000 Kajang (Malaysia)

    2012-11-27

    Electrochemical deposition has emerged as a promising route for nanostructure fabrication in recent years due to the many inherent advantages it possesses. This study focuses on the synthesis of high-aspect-ratio multisegmented Au/Ni nanowires using template-directed sequential electrochemical deposition techniques. By selectively removing the Ni segments in the nanowires, high-yield of pure gold nanorods of predetermined lengths was obtained. Alternatively, the sacrificial Ni segments in the nanowires can be galvanically displaced with Bi and Te to form barbells structures with Bi{sub x}Te{sub y} nanotubes attached to neighbouring gold segments. Detailed studies on the nanostructures obtained were carried out using various microscopy, diffraction and probebased techniques for structural, morphological and chemical characterizations.

  8. Semiconductor nanowires and templates for electronic applications

    Energy Technology Data Exchange (ETDEWEB)

    Ying, Xiang

    2009-07-15

    This thesis starts by developing a platform for the organized growth of nanowires directly on a planar substrate. For this, a method to fabricate horizontal porous alumina membranes is studied. The second part of the thesis focuses on the study of nanowires. It starts by the understanding of the growth mechanisms of germanium nanowires and follows by the structural and electrical properties at the single nanowire level. Horizontally aligned porous anodic alumina (PAA) was used as a template for the nanowire synthesis. Three PAA arrangements were studied: - high density membranes - micron-sized fingers - multi-contacts Membranes formed by a high density of nanopores were obtained by anodizing aluminum thin films. Metallic and semiconducting nanowires were synthesized into the PAA structures via DC deposition, pulsed electro-depostion and CVD growth. The presence of gold, copper, indium, nickel, tellurium, and silicon nanowires inside PAA templates was verified by SEM and EDX analysis. Further, room-temperature transport measurements showed that the pores are completely filled till the bottom of the pores. In this dissertation, single crystalline and core-shell germanium nanowires are synthesized using indium and bismuth as catalyst in a chemical vapor deposition procedure with germane (GeH{sub 4}) as growth precursor. A systematic growth study has been performed to obtain high aspect-ratio germanium nanowires. The influence of the growth conditions on the final morphology and the crystalline structure has been determined via scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM). In the case of indium catalyzed germanium nanowires, two different structures were identified: single crystalline and crystalline core-amorphous shell. The preferential growth axis of both kinds of nanowires is along the [110] direction. The occurrence of the two morphologies was found to only depend on the nanowire dimension. In the case of bismuth

  9. Heteroepitaxial Writing of Silicon-on-Sapphire Nanowires.

    Science.gov (United States)

    Xu, Mingkun; Xue, Zhaoguo; Wang, Jimmy; Zhao, Yaolong; Duan, Yao; Zhu, Guangyao; Yu, Linwei; Xu, Jun; Wang, Junzhuan; Shi, Yi; Chen, Kunji; Roca I Cabarrocas, Pere

    2016-12-14

    The heteroepitaxial growth of crystal silicon thin films on sapphire, usually referred to as SoS, has been a key technology for high-speed mixed-signal integrated circuits and processors. Here, we report a novel nanoscale SoS heteroepitaxial growth that resembles the in-plane writing of self-aligned silicon nanowires (SiNWs) on R-plane sapphire. During a low-temperature growth at 900 °C, the bottom heterointerface cultivates crystalline Si pyramid seeds within the catalyst droplet, while the vertical SiNW/catalyst interface subsequently threads the seeds into continuous nanowires, producing self-oriented in-plane SiNWs that follow a set of crystallographic directions of the sapphire substrate. Despite the low-temperature fabrication process, the field effect transistors built on the SoS-SiNWs demonstrate a high on/off ratio of >5 × 104 and a peak hole mobility of >50 cm2/V·s. These results indicate the novel potential of deploying in-plane SoS nanowire channels in places that require high-performance nanoelectronics and optoelectronics with a drastically reduced thermal budget and a simplified manufacturing procedure.

  10. Effect of Crystallographic Texture on Magnetic Characteristics of Cobalt Nanowires

    Directory of Open Access Journals (Sweden)

    Usman M

    2010-01-01

    Full Text Available Abstract Cobalt nanowires with controlled diameters have been synthesized using electrochemical deposition in etched ion-track polycarbonate membranes. Structural characterization of these nanowires with diameter 70, 90, 120 nm and length 30 μm was performed by scanning electron microscopy, high-resolution transmission electron microscopy, and X-ray diffraction techniques. The as-prepared wires show uniform diameter along the whole length and X-ray diffraction analysis reveals that [002] texture of these wires become more pronounced as diameter is reduced. Magnetic characterization of the nanowires shows a clear difference of squareness and coercivity between parallel and perpendicular orientations of the wires with respect to the applied field direction. In case of parallel applied field, the coercivity has been found to be decreasing with increasing diameter of the wires while in perpendicular case; the coercivity observes lower values for larger diameter. The results are explained by taking into account the magnetocrystalline and shape anisotropies with respect to the applied field and domain transformation mechanism when single domain limit is surpassed.

  11. CdTe-HgTe core-shell nanowire growth controlled by RHEED

    Science.gov (United States)

    Kessel, M.; Hajer, J.; Karczewski, G.; Schumacher, C.; Brüne, C.; Buhmann, H.; Molenkamp, L. W.

    2017-07-01

    We present results on the growth of CdTe-HgTe core-shell nanowires, a realization of a quasi-one-dimensional heterostructure of the topological insulator HgTe. The growth is a two step process consisting of the growth of single crystalline zinc blende CdTe nanowires with the vapor-liquid-solid method and the overgrowth of these wires with HgTe such that a closed shell is formed around the CdTe core structure. The CdTe wire growth is monitored by RHEED allowing us to infer information on the crystal properties from the electron diffraction pattern. This information is used to find and control the optimal growth temperature. High quality single crystal CdTe nanowires grow with a preferred orientation. For the growth of the conductive HgTe shell structure we find that the supplied Hg:Te ratio is the crucial parameter to facilitate growth on all surface facets.

  12. Single-crystal germanium layers grown on silicon by nanowire seeding.

    Science.gov (United States)

    Hu, Shu; Leu, Paul W; Marshall, Ann F; McIntyre, Paul C

    2009-10-01

    Three-dimensional integration and the combination of different material systems are central themes of electronics research. Recently, as-grown vertical one-dimensional structures have been integrated into high-density three-dimensional circuits. However, little attention has been paid to the unique structural properties of germanium nanowires obtained by epitaxial and heteroepitaxial growth on Ge(111) and Si(111) substrates, despite the fact that the integration of germanium on silicon is attractive for device applications. Here, we demonstrate the lateral growth of single crystal germanium islands tens of micrometres in diameter by seeding from germanium nanowires grown on a silicon substrate. Vertically aligned high-aspect-ratio nanowires can transfer the orientation and perfection of the substrate crystal to overlying layers a micrometre or more above the substrate surface. This technique can be repeated to build multiple active device layers, a key requirement for the fabrication of densely interconnected three-dimensional integrated circuits.

  13. Angle-dependent magnetotransport in GaAs/InAs core/shell nanowires

    Science.gov (United States)

    Haas, Fabian; Wenz, Tobias; Zellekens, Patrick; Demarina, Nataliya; Rieger, Torsten; Lepsa, Mihail; Grützmacher, Detlev; Lüth, Hans; Schäpers, Thomas

    2016-01-01

    We study the impact of the direction of magnetic flux on the electron motion in GaAs/InAs core/shell nanowires. At small tilt angles, when the magnetic field is aligned nearly parallel to the nanowire axis, we observe Aharonov–Bohm type h/e flux periodic magnetoconductance oscillations. These are attributed to transport via angular momentum states, formed by electron waves within the InAs shell. With increasing tilt of the nanowire in the magnetic field, the flux periodic magnetoconductance oscillations disappear. Universal conductance fluctuations are observed for all tilt angles, however with increasing amplitudes for large tilt angles. We record this evolution of the electron propagation from a circling motion around the core to a diffusive transport through scattering loops and give explanations for the observed different transport regimes separated by the magnetic field orientation. PMID:27091000

  14. Fabrication and Characterization of ZnO Nanowire Arrays with an Investigation into Electrochemical Sensing Capabilities

    Directory of Open Access Journals (Sweden)

    Jessica Weber

    2008-01-01

    Full Text Available ZnO nanowire arrays were grown on a Si (100 substrate using the vapor-liquid-solid (VLS method. ZnO nanowires were characterized by XRD, SEM, bright field TEM, and EDS. They were found to have a preferential orientation along the c-axis. The as-prepared sample was functionalized with glucose oxidase by physical adsorption. FTIR was taken before and after functionalization to verify the presence of the attached enzyme. Electrochemical measurements were performed on the nanowire array by differential pulse voltammetry in the range of −0.6 to 0.4 V. The nanoarray sensor displayed high sensitivity to glucose in the range of 1.0 ×10−4 to 1.0 ×10−2 mol L−1.

  15. Synthesis and red-shifted photoluminescence of single-crystalline ZnO nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Deng Yuan [School of Chemistry and Environment, BeiHang University, Beijing 100083 (China)], E-mail: dengyuan@buaa.edu.cn; Wang Guangsheng; Li Na [School of Chemistry and Environment, BeiHang University, Beijing 100083 (China); Guo Lin [School of Chemistry and Environment, BeiHang University, Beijing 100083 (China)], E-mail: guolin@buaa.edu.cn

    2009-01-15

    Local-oriented single-crystalline ZnO nanowires have been synthesized in large scale by a simple microemulsion method in the presence of sulfonate-polystyrene (S-PS) and dodecyl benzene sulfonic acid sodium salt (DBS). The as-prepared product is characterized by using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), infrared (IR) spectra and photoluminescence (PL) spectrum. The nanowires exhibit a local congregation and preferentially grow along the [0 0 2] facet. FT-IR spectrum indicates that S-PS is adsorbed on the surface of ZnO nanowires. The PL spectrum shows evidently red-shifted ultraviolet (UV) emission.

  16. Skill-building through Task-Oriented Motor Practice (STOMP) intervention for activities of daily living: study protocol for a randomized, single blinded clinical trial.

    Science.gov (United States)

    Ciro, C A; Stoner, J; Prodan, C; Hershey, L

    2016-01-01

    Progressive disability in activities of daily living (ADL) is inevitable for people with Alzheimer's disease and related dementias (ADRD). Attempts to slow or prevent ADL disability have been unsuccessful despite making progress in behavioral training methods. Missing from this research is an emphasis on how we maximize a patient's engagement during training and the rigorous examination of implementation protocols (dosing and training methods) which may advantage learning in people with ADRD. Our team addressed this gap with the development of the STOMP (Skill-building through Task-Oriented Motor Practice) intervention which creates methods for obtaining ADL goals that support "personhood" and tests high-intensity protocols that appear to advantage learning and sustained learning over time. Through this study, we aim to evaluate differential outcomes by dose levels as well as assess the moderating effects of attention to task during training. Randomized-controlled trial with 32 participants with dementia assigned to either the original, intensive STOMP protocol (3 hours/day, 5 days/week for 2 weeks) or a less-intensive STOMP protocol (1 hour/day, 2 days/week for 2 weeks) delivered by an occupational therapy assistant in the home. ADL training is delivered using motor learning theory techniques of blocked practice, continuous verbal praise, errorless learning and intense dosing schedules. Inclusion criteria: English speaking, adults 50-80 years old that live with a legally-authorized representative that can provide consent, who can follow a one-step command, have three ADL goals they want to address and can participate in an intense therapy protocol. Exclusions include diagnoses of Creutzfeldt-Jakob Dementia, delirium or receptive/global aphasia. Recruitment will occur through direct mailing, physician referral and media/support group presentations. Blinded occupational therapists will complete baseline, post-intervention and 3-month follow-up assessments in the

  17. Fabrication of nanowires and nanostructures

    DEFF Research Database (Denmark)

    Mátéfi-Tempfli, Stefan; Mátéfi-Tempfli, M.; Piraux, L.

    2009-01-01

    We report on different approaches that we have adopted and developed for the fabrication of nanowires and nanostructures. Methods based on template synthesis and on self organization seem to be the most promising for the fabrication of nanomaterials and nanostructures due to their easiness and low...... cost. The development of a supported nanoporous alumina template and the possibility of using this template to combine electrochemical synthesis with lithographic methods open new ways for the fabrication of complex nanostructures. The numerous advantages of the supported template and its compatibility...... with microelectronic processes make it an ideal candidate for further integration into large-scale fabrication of various nanowire-based devices....

  18. Growth mechanism of titanium dioxide nanowires for dye-sensitized solar cells.

    Science.gov (United States)

    Boercker, J E; Enache-Pommer, E; Aydil, E S

    2008-03-05

    Mesoporous films made of titanium dioxide nanowires are desirable for dye-sensitized solar cells because nanowires provide direct conduction pathways for photogenerated electrons. Anatase titanium dioxide nanowires with polycrystalline microstructure were synthesized on titanium foil using a three-step process. First, the top surface of the titanium foil was transformed to Na(2)Ti(2)O(4)(OH)(2) nanotubes through hydrothermal oxidation in NaOH. Next, the Na(2)Ti(2)O(4)(OH)(2) nanotubes were converted to H(2)Ti(2)O(4)(OH)(2) nanotubes by ion exchange. Finally, the H(2)Ti(2)O(4)(OH)(2) nanotubes were converted to polycrystalline anatase nanowires through a topotactic transformation. The film morphology evolution, crystal structure transformations and growth mechanism are described in detail. Titanium foil reacts with NaOH to form Na(2)Ti(2)O(4)(OH)(2) sheets, which exfoliate and spiral into nanotubes. The Na(2)Ti(2)O(4)(OH)(2) nanotubes are immersed in HCl solution to replace the Na(+) ions with H(+) ions. During the topotactic transformation of H(2)Ti(2)O(4)(OH)(2) nanotubes to anatase TiO(2) nanowires, the sheets made of edge bonded TiO(6) octahedra in the H(2)Ti(2)O(4)(OH)(2) nanotubes dehydrate and move towards each other to form anatase crystals oriented along the nanotube axis which creates a polycrystalline nanowire. These mesoporous TiO(2) nanowire films were suitable for use as dye-sensitized solar cell photoanodes.

  19. Investigation of the electronic transport in polarization-induced nanowires using conductive atomic force microscopy (AFM)

    Science.gov (United States)

    Selcu, Camelia; Carnevale, Santino C.; Kent, Thomas F.; Akyol, Fatih; Phillips, Patrick J.; Mills, Michael J.; Rajan, Siddharth; Pelz, Jonathan P.; Myers, Roberto C.

    2013-03-01

    In the search to improve short wavelength light emitting diodes (LED's), where the dislocations limit their performance and hole doping (Mg) is a fundamental challenge, the III-Nitride polarization-induced nanowire LED provides a promising system to address these problems. The new type of pn diode, polarization-induced nanowire LED (PINLED), was developed by linearly grading AlGaN composition of the nanowires (from GaN to AlN and back to GaN) from 0% to 100% and back to 0% Al (Carnevale et al, Nano Lett., 12, 915 (2012)). In III-Nitrides (Ga,Al/N), the effects of polarization are commonly observed at the surfaces and interfaces. Thus, in the case of the polarization-induced nanowire LEDs, taking advantage of the bound polarization charge, due to the grading of the AlGaN, the pn diodes are formed. The polarity of the nanowires determines the carrier type in each graded region, and therefore the diode orientation (n/p vs p/n). We used conductive AFM to investigate polarity of the PINLED's as well as hole conductivity in PINLED's made of AlGaN with and without acceptor doping. The results reveal that most of the wires are n-top/p-bottom (N-face), but some are p-top/n-bottom (Ga-face). Also, we found that the current density is 3 orders of magnitude larger in the case of the doped nanowires than the nanowires with no impurity doping.

  20. Germanium nanowires grown using different catalyst metals

    Energy Technology Data Exchange (ETDEWEB)

    Gouveia, R.C., E-mail: riama@ifsp.edu.br [Departamento de Física – NanO Lab, Universidade Federal de São Carlos, Rod. Washington Luís, Km 235 – SP 310, São Carlos, CEP 13565-905 (Brazil); Área de Ciências, Instituto Federal de Educação Ciência e Tecnologia de São Paulo, Rua Américo Ambrósio, 269, Jd. Canaã, Sertãozinho, CEP 14169-263 (Brazil); Kamimura, H.; Munhoz, R.; Rodrigues, A.D. [Departamento de Física – NanO Lab, Universidade Federal de São Carlos, Rod. Washington Luís, Km 235 – SP 310, São Carlos, CEP 13565-905 (Brazil); Leite, E.R. [Departamento de Química – LIEC, Universidade Federal de São Carlos, São Carlos, CEP 13565-905 (Brazil); Chiquito, A.J. [Departamento de Física – NanO Lab, Universidade Federal de São Carlos, Rod. Washington Luís, Km 235 – SP 310, São Carlos, CEP 13565-905 (Brazil)

    2016-11-01

    Germanium nanowires have been synthesized by the well known vapor-liquid-solid growth mechanism using gold, silver, cooper, indium and nickel as catalyst metals. The influence of metal seeds on nanowires structural and electronic transport properties was also investigated. Electron microscopy images demonstrated that, despite differences in diameters, all nanowires obtained presented single crystalline structures. X-ray patterns showed that all nanowires were composed by germanium with a small amount of germanium oxide, and the catalyst metal was restricted at the nanowires' tips. Raman spectroscopy evidenced the long range order in the crystalline structure of each sample. Electrical measurements indicated that variable range hopping was the dominant mechanism in carrier transport for all devices, with similar hopping distance, regardless the material used as catalyst. Then, in spite of the differences in synthesis temperatures and nanowires diameters, the catalyst metals have not affected the composition and crystalline quality of the germanium nanowires nor the carrier transport in the germanium nanowire network devices. - Highlights: • Ge nanowires were grown by VLS method using Au, Ag, Cu, In and Ni as catalysts. • All nanowires presented high single crystalline quality and long range order. • Devices showed semiconducting behavior having VRH as dominant transport mechanism. • The metal catalyst did not influence structural properties or the transport mechanism.

  1. Influence of the Hydrothermal Method Growth Parameters on the Zinc Oxide Nanowires Deposited on Several Substrates

    Directory of Open Access Journals (Sweden)

    Concepción Mejía-García

    2014-01-01

    Full Text Available We report the synthesis of ZnO nanowires grown on several substrates (PET, glass, and Si using a two-step process: (a preparation of the seed layer on the substrate by spin coating, from solutions of zinc acetate dihydrate and 1-propanol, and (b growth of the ZnO nanostructures by dipping the substrate in an equimolar solution of zinc nitrate hexahydrate and hexamethylenetetramine. Subsequently, films were thermally treated with a commercial microwave oven (350 and 700 W for 5, 20, and 35 min. The ZnO nanowires obtained were characterized structurally, morphologically, and optically using XRD, SEM, and UV-VIS transmission, respectively. XRD patterns spectra revealed the presence of Zn(OH2 on the films grown on glass and Si substrates. A preferential orientation along c-axis directions for films grown on PET substrate was observed. An analysis by SEM revealed that the growth of the ZnO nanowires on PET and glass is better than the growth on Si when the same growth parameters are used. On glass substrates, ZnO nanowires less than 50 nm in diameter and between 200 nm and 1200 nm in length were obtained. The ZnO nanowires band gap energy for the films grown on PET and glass was obtained from optical transmission spectra.

  2. Dislocation-induced nanoparticle decoration on a GaN nanowire.

    Science.gov (United States)

    Yang, Bing; Yuan, Fang; Liu, Qingyun; Huang, Nan; Qiu, Jianhang; Staedler, Thorsten; Liu, Baodan; Jiang, Xin

    2015-02-04

    GaN nanowires with homoepitaxial decorated GaN nanoparticles on their surface along the radial direction have been synthesized by means of a chemical vapor deposition method. The growth of GaN nanowires is catalyzed by Au particles via the vapor-liquid-solid (VLS) mechanism. Screw dislocations are generated along the radial direction of the nanowires under slight Zn doping. In contrast to the metal-catalyst-assisted VLS growth, GaN nanoparticles are found to prefer to nucleate and grow at these dislocation sites. High-resolution transmission electron microscopy (HRTEM) analysis demonstrates that the GaN nanoparticles possess two types of epitaxial orientation with respect to the corresponding GaN nanowire: (I) [1̅21̅0]np//[1̅21̅0]nw, (0001)np//(0001)nw; (II) [1̅21̅3]np//[12̅10]nw, (101̅0)np//(101̅0)nw. An increased Ga signal in the energy-dispersive spectroscopy (EDS) profile lines of the nanowires suggests GaN nanoparticle growth at the edge surface of the wires. All the crystallographic results confirm the importance of the dislocations with respect to the homoepitaxial growth of the GaN nanoparticles. Here, screw dislocations situated on the (0001) plane provide the self-step source to enable nucleation of the GaN nanoparticles.

  3. Photonic nanowires for quantum optics

    DEFF Research Database (Denmark)

    Munsch, M.; Claudon, J.; Bleuse, J.

    Photonic nanowires (PWs) are simple dielectric structures for which a very efficient and broadband spontaneous emission (SE) control has been predicted [1]. Recently, a single photon source featuring a record high efficiency was demonstrated using this geometry [2]. Using time-resolved micro-phot...

  4. Nanowire-based gas sensors

    NARCIS (Netherlands)

    Chen, X.; Wong, C.K.Y.; Yuan, C.A.; Zhang, G.

    2013-01-01

    Gas sensors fabricated with nanowires as the detecting elements are powerful due to their many improved characteristics such as high surface-to-volume ratios, ultrasensitivity, higher selectivity, low power consumption, and fast response. This paper gives an overview on the recent process of the

  5. Majorana fermions in semiconductor nanowires

    Science.gov (United States)

    Stanescu, Tudor D.; Lutchyn, Roman M.; Das Sarma, S.

    2011-10-01

    We study multiband semiconducting nanowires proximity coupled with an s-wave superconductor and calculate the topological phase diagram as a function of the chemical potential and magnetic field. The nontrivial topological state corresponds to a superconducting phase supporting an odd number of pairs of Majorana modes localized at the ends of the wire, whereas the nontopological state corresponds to a superconducting phase with no Majoranas or with an even number of pairs of Majorana modes. Our key finding is that multiband occupancy not only lifts the stringent constraint of one-dimensionality, but also allows having higher carrier density in the nanowire. Consequently, multiband nanowires are better suited for stabilizing the topological superconducting phase and for observing the Majorana physics. We present a detailed study of the parameter space for multiband semiconductor nanowires focusing on understanding the key experimental conditions required for the realization and detection of Majorana fermions in solid-state systems. We include various sources of disorder and characterize their effects on the stability of the topological phase. Finally, we calculate the local density of states as well as the differential tunneling conductance as functions of external parameters and predict the experimental signatures that would establish the existence of emergent Majorana zero-energy modes in solid-state systems.

  6. Nanowire-based Quantum Photonics

    NARCIS (Netherlands)

    Bulgarini, G.

    2014-01-01

    In this thesis work, I studied individual quantum dots embedded in one-dimensional nanostructures called nanowires. Amongst the effects given by the nanometric dimensions, quantum dots enable the generation of single light particles: photons. Single photon emitters and detectors are central building

  7. Randomized controlled trial of a family-oriented self-management program to improve self-efficacy, glycemic control and quality of life among Thai individuals with Type 2 diabetes.

    Science.gov (United States)

    Wichit, Nutchanath; Mnatzaganian, George; Courtney, Mary; Schulz, Paula; Johnson, Maree

    2017-01-01

    We evaluated a theoretically-derived family-oriented intervention aimed to improve self-efficacy, self-management, glycemic control and quality of life in individuals living with Type 2 diabetes in Thailand. In a single-blinded randomized controlled trial, 140 volunteer individuals with Type 2 diabetes, recruited from a diabetes clinic in rural Thailand, were randomly allocated to intervention and control arms. Those in the intervention arm received routine care plus a family-oriented program that included education classes, group discussions, a home visit, and a telephone follow-up while the control arm only received routine care. Improvement in outcomes over time (baseline, Week 3, and Week 13 following intervention) was evaluated using Generalized Estimating Equations multivariable analyses. Except for age, no between-group significant differences were observed in all other baseline characteristics. Diabetes self-efficacy, self-management, and quality of life improved in the intervention arm but no improvement was observed in the controls. In the risk-adjusted multivariable models, compared to the controls, the intervention arm had significantly better self-efficacy, self-management, outcome expectations, and diabetes knowledge (plife or glycemic control, however, in the risk-adjusted multivariable models, higher self-management scores were associated with significantly decreased HbA1c levels (plife (pfamily-oriented program improved patients' self-efficacy and self-management, which in turn could decrease HbA1c levels. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  8. Magnetic crossover effect in Nickel nanowire arrays

    Energy Technology Data Exchange (ETDEWEB)

    Ghaddar, A. [Laboratoire de Magnetisme de Bretagne, CNRS-FRE 3117, C.S. 93837, 29238 Brest, Cedex (France); Gloaguen, F. [Laboratoire de Chimie, Electrochimie Moleculaire et Chimie Analytique, CNRS-UMR 6521, C. S. 93837 Brest Cedex 3 (France); Gieraltowski, J. [Laboratoire de Magnetisme de Bretagne, CNRS-FRE 3117, C.S. 93837, 29238 Brest, Cedex (France); Tannous, C., E-mail: tannous@univ-brest.f [Laboratoire de Magnetisme de Bretagne, CNRS-FRE 3117, C.S. 93837, 29238 Brest, Cedex (France)

    2011-05-01

    A crossover effect in the magnetic reversal mechanism within arrays of Nickel nanowires whose diameter varies from 15 to 100 nm is observed around 50 nm. Hysteresis loops and FMR measurements confirm that nanowire diameter controls effectively the nanowire easy axis as well as the magnetization reversal mechanism. This might be very interesting for spintronic devices based on current-induced domain motion such as non-volatile magnetic memory elements (MRAM) and low Ohmic loss devices.

  9. Misfit dislocations in composites with nanowires

    CERN Document Server

    Gutkin, M Y; Sheinerman, A G

    2003-01-01

    A theoretical model is suggested which describes the generation and evolution of misfit dislocations in composite solids containing nanowires with rectangular cross-section. In the framework of the model, the ranges of the geometric parameters (nanowire sizes, misfit parameter, interspacing between the nanowire and the free surface of the composite) are calculated at which the generation of various misfit dislocation configurations (loops, semi-loops and dipoles) is energetically favourable. Transformations of these dislocation configurations and their specific features are discussed.

  10. Effects of the oriental herbal medicine Bofu-tsusho-san in obesity hypertension: a multicenter, randomized, parallel-group controlled trial (ATH-D-14-01021.R2).

    Science.gov (United States)

    Azushima, Kengo; Tamura, Kouichi; Haku, Sona; Wakui, Hiromichi; Kanaoka, Tomohiko; Ohsawa, Masato; Uneda, Kazushi; Kobayashi, Ryu; Ohki, Kohji; Dejima, Toru; Maeda, Akinobu; Hashimoto, Tatsuo; Oshikawa, Jin; Kobayashi, Yusuke; Nomura, Koichiro; Azushima, Chieko; Takeshita, Yasuyo; Fujino, Ryota; Uchida, Ken; Shibuya, Ken; Ando, Daisaku; Tokita, Yasuo; Fujikawa, Tetsuya; Toya, Yoshiyuki; Umemura, Satoshi

    2015-05-01

    There is no clinical evidence that supports the benefit of integrative medicine, defined as combination therapy of oriental and western medicine, on obesity-related hypertension. This study evaluates the efficacy of Bofu-tsusho-san (BOF), an oriental herbal medicine, on the ambulatory blood pressure (BP) profile in hypertensive patients with obesity. The study design was a multicenter, randomized, open-label, parallel-group controlled trial in 107 hypertensive patients with obesity. Participants were randomly assigned to receive either the conventional control therapy or BOF add-on therapy. In both groups antihypertensive therapy was aimed at achieving the target clinic BP. The primary outcome was change in the ambulatory BP profile from baseline to 24 weeks after randomization. Daytime systolic BP variability, an important parameter of ambulatory BP profile, was decreased in the BOF group, and the difference in the changes in daytime systolic BP variability was significant between the BOF and control group (Control vs BOF; the change from baseline in daytime systolic BP variability, 1.0±3.3 vs -1.0±3.3%; p=0.006). The BOF add-on therapy effectively improved the ambulatory BP variability. This is the first report suggesting that an integrative medicine approach may exert favorable effects on obesity-related hypertension compared with conventional pharmaceutical treatment. UMIN000003878. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

  11. Preparation and characterization of haematite nanowire arrays

    CERN Document Server

    Xue, D S; Liu, Q F; Zhang, L Y

    2003-01-01

    Arrays of alpha-Fe sub 2 O sub 3 nanowires embedded in anodic alumina membranes were obtained after heat-treating beta-FeOOH nanowire arrays fabricated by electrochemical deposition. Haematite polycrystalline nanowires with maximum length of about 7 mu m and average diameter of about 120 nm were characterized by means of x-ray diffraction and transmission electron microscopy. The Morin temperature below 80 K and Neel temperature of about 350 K for the alpha-Fe sub 2 O sub 3 nanowire arrays, far lower than those of bulk material, were measured by Moessbauer spectroscopy and using a Magnetic Property Measurement System.

  12. Diluted magnetic semiconductor nanowires exhibiting magnetoresistance

    Science.gov (United States)

    Yang, Peidong [El Cerrito, CA; Choi, Heonjin [Seoul, KR; Lee, Sangkwon [Daejeon, KR; He, Rongrui [Albany, CA; Zhang, Yanfeng [El Cerrito, CA; Kuykendal, Tevye [Berkeley, CA; Pauzauskie, Peter [Berkeley, CA

    2011-08-23

    A method for is disclosed for fabricating diluted magnetic semiconductor (DMS) nanowires by providing a catalyst-coated substrate and subjecting at least a portion of the substrate to a semiconductor, and dopant via chloride-based vapor transport to synthesize the nanowires. Using this novel chloride-based chemical vapor transport process, single crystalline diluted magnetic semiconductor nanowires Ga.sub.1-xMn.sub.xN (x=0.07) were synthesized. The nanowires, which have diameters of .about.10 nm to 100 nm and lengths of up to tens of micrometers, show ferromagnetism with Curie temperature above room temperature, and magnetoresistance up to 250 Kelvin.

  13. Synthesis of ZnO Nanowires and Their Photovoltaic Application: ZnO Nanowires/AgGaSe2 Thin Film Core-Shell Solar Cell

    Directory of Open Access Journals (Sweden)

    Elif Peksu

    2015-01-01

    Full Text Available In this investigation, hydrothermal technique was employed for the synthesis of well-aligned dense arrays of ZnO nanowires (NWs on a wide range of substrates including silicon, soda-lime glass (SLG, indium tin oxide, and polyethylene terephthalate (PET. Results showed that ZnO NWs can be successfully grown on any substrate that can withstand the growth temperature (~90°C and precursor solution chemicals. Results also revealed that there was a strong impact of growth time and ZnO seed layer deposition route on the orientation, density, diameter, and uniformity of the synthesized nanowires. A core-shell n-ZnO NWs/p-AgGaSe2 (AGS thin film solar cell was fabricated as a device application of synthesized ZnO nanowires by decoration of nanowires with ~700 nm thick sputtering deposited AGS thin film layer, which demonstrated an energy conversion efficiency of 1.74% under 100 mW/cm2 of simulated solar illumination.

  14. Single crystalline PtSi nanowires, PtSi/Si/PtSi nanowire heterostructures, and nanodevices.

    Science.gov (United States)

    Lin, Yung-Chen; Lu, Kuo-Chang; Wu, Wen-Wei; Bai, Jingwei; Chen, Lih J; Tu, K N; Huang, Yu

    2008-03-01

    We report the formation of PtSi nanowires, PtSi/Si/PtSi nanowire heterostructures, and nanodevices from such heterostructures. Scanning electron microscopy studies show that silicon nanowires can be converted into PtSi nanowires through controlled reactions between lithographically defined platinum pads and silicon nanowires. High-resolution transmission electron microscopy studies show that PtSi/Si/PtSi heterostructure has an atomically sharp interface with epitaxial relationships of Si[110]//PtSi[010] and Si(111)//PtSi(101). Electrical measurements show that the pure PtSi nanowires have low resistivities approximately 28.6 microOmega.cm and high breakdown current densities>1x10(8) A/cm2. Furthermore, using single crystal PtSi/Si/PtSi nanowire heterostructures with atomically sharp interfaces, we have fabricated high-performance nanoscale field-effect transistors from intrinsic silicon nanowires, in which the source and drain contacts are defined by the metallic PtSi nanowire regions, and the gate length is defined by the Si nanowire region. Electrical measurements show nearly perfect p-channel enhancement mode transistor behavior with a normalized transconductance of 0.3 mS/microm, field-effect hole mobility of 168 cm2/V.s, and on/off ratio>10(7), demonstrating the best performing device from intrinsic silicon nanowires.

  15. Indium Tin Oxide@Carbon Core–Shell Nanowire and Jagged Indium Tin Oxide Nanowire

    Directory of Open Access Journals (Sweden)

    Wang Yong

    2010-01-01

    Full Text Available Abstract This paper reports two new indium tin oxide (ITO-based nanostructures, namely ITO@carbon core–shell nanowire and jagged ITO nanowire. The ITO@carbon core–shell nanowires (~50 nm in diameter, 1–5 μm in length, were prepared by a chemical vapor deposition process from commercial ITO nanoparticles. A carbon overlayer (~5–10 in thickness was observed around ITO nanowire core, which was in situ formed by the catalytic decomposition of acetylene gas. This carbon overlayer could be easily removed after calcination in air at an elevated temperature of 700°C, thus forming jagged ITO nanowires (~40–45 nm in diameter. The growth mechanisms of ITO@carbon core–shell nanowire and jagged ITO nanowire were also suggested.

  16. Magnetic features of a mixed ferro-ferrimagnetic ternary alloy cylindrical nanowire

    Science.gov (United States)

    Vatansever, Z. D.

    2017-10-01

    In the present study, we have investigated the finite temperature magnetic phase transition properties of a mixed ferro-ferrimagnetic ternary alloy cylindrical nanowire of the type ABpC1-p by Monte Carlo simulation technique. The nanowire system consists of two interpenetrating sublattices, one of which contains type-A magnetic components with spin-3/2 and the other one is randomly occupied type-B and type-C magnetic components with spin-1 and spin-5/2, respectively. We have examined the effect of exchange interaction ratio, R, and the concentration value of type-B magnetic ions, p, on the transition temperature of the system. It has been found that one can modify the transition temperature and saturation magnetization of the system by varying concentration value and interaction ratio. Moreover, our numerical results show that the ternary alloy nanowire system exhibits compensation behavior for particular values of the system parameters.

  17. Shape Engineering Driven by Selective Growth of SnO2 on Doped Ga2O3 Nanowires.

    Science.gov (United States)

    Alonso-Orts, Manuel; Sánchez, Ana M; Hindmarsh, Steven A; López, Iñaki; Nogales, Emilio; Piqueras, Javier; Méndez, Bianchi

    2017-01-11

    Tailoring the shape of complex nanostructures requires control of the growth process. In this work, we report on the selective growth of nanostructured tin oxide on gallium oxide nanowires leading to the formation of SnO2/Ga2O3 complex nanostructures. Ga2O3 nanowires decorated with either crossing SnO2 nanowires or SnO2 particles have been obtained in a single step treatment by thermal evaporation. The reason for this dual behavior is related to the growth direction of trunk Ga2O3 nanowires. Ga2O3 nanowires grown along the [001] direction favor the formation of crossing SnO2 nanowires. Alternatively, SnO2 forms rhombohedral particles on [110] Ga2O3 nanowires leading to skewer-like structures. These complex oxide structures were grown by a catalyst-free vapor-solid process. When pure Ga and tin oxide were used as source materials and compacted powders of Ga2O3 acted as substrates, [110] Ga2O3 nanowires grow preferentially. High-resolution transmission electron microscopy analysis reveals epitaxial relationship lattice matching between the Ga2O3 axis and SnO2 particles, forming skewer-like structures. The addition of chromium oxide to the source materials modifies the growth direction of the trunk Ga2O3 nanowires, growing along the [001], with crossing SnO2 wires. The SnO2/Ga2O3 junctions does not meet the lattice matching condition, forming a grain boundary. The electronic and optical properties have been studied by XPS and CL with high spatial resolution, enabling us to get both local chemical and electronic information on the surface in both type of structures. The results will allow tuning optical and electronic properties of oxide complex nanostructures locally as a function of the orientation. In particular, we report a dependence of the visible CL emission of SnO2 on its particular shape. Orange emission dominates in SnO2/Ga2O3 crossing wires while green-blue emission is observed in SnO2 particles attached to Ga2O3 trunks. The results show that the Ga2O3-SnO2

  18. Temperature Dependence of the Resistivity and Seebeck Coefficient of Individual Single-Crystal Bismuth Nanowires of 345-nm and 594-nm Diameters Encased in a Quartz Template

    Science.gov (United States)

    Otsuka, Mioko; Homma, Ryoei; Hasegawa, Yasuhiro

    2017-05-01

    Temperature dependence measurements of resistivity and the Seebeck coefficient were performed using individual bismuth nanowires of 345-nm and 594-nm diameters encased in a quartz template. Each nanowire was confirmed as a single crystal by Laue measurement, and an advanced mean free path model was utilized to explain both temperature dependencies. The model successfully explains the dependence over 100 K, which occurs because the carrier mobility is restricted by boundary scattering at the nanowire surface considering the crystal orientation along the wire length direction, band structure, and isotropic Fermi surface. However, it is difficult to determine the temperature dependence of the resistivity in the low-temperature region, in which a much higher temperature coefficient is indicated, especially at temperatures lower than 50 K. Although we calculated the temperature dependence of the resistivity with the influence of p-type contamination in the nanowire because a positive Seebeck coefficient at low temperatures was observed, an explanation of the resistivity in the low-temperature region has not been developed. Therefore, a hypothesis was introduced in which the hole mobility was not restricted in the nanowire, and the hole mobility was estimated by the mobility ratio from the Seebeck coefficient, the measured resistivity, and the electron mobility using the model. Lastly, the temperature dependence of the resistivity can be explained over the entire temperature region. This result suggests that the scattering mechanism between holes and electrons in the nanowire differs and depends on the crystal orientation in the low-temperature region.

  19. Angular Magnetoresistance of Nanowires with Alternating Cobalt and Nickel Segments

    KAUST Repository

    Mohammed, Hanan

    2017-06-22

    Magnetization reversal in segmented Co/Ni nanowires with varying number of segments was studied using angular Magnetoresistance (MR) measurements on isolated nanowires. The MR measurements offer an insight into the pinning of domain walls within the nanowires. Angular MR measurements were performed on nanowires with two and multiple segments by varying the angle between the applied magnetic field and nanowire (−90° ≤θ≤90°). The angular MR measurements reveal that at lower values of θ the switching fields are nearly identical for the multisegmented and two-segmented nanowires, whereas at higher values of θ, a decrease in the switching field is observed in the case of two segmented nanowires. The two segmented nanowires generally exhibit a single domain wall pinning event, whereas an increased number of pinning events are characteristic of the multisegmented nanowires at higher values of θ. In-situ magnetic force microscopy substantiates reversal by domain wall nucleation and propagation in multisegmented nanowires.

  20. High-Performance Single Nanowire Tunnel Diodes

    DEFF Research Database (Denmark)

    Wallentin, Jesper; Persson, Johan Mikael; Wagner, Jakob Birkedal

    2010-01-01

    We demonstrate single nanowire tunnel diodes with room temperature peak current densities of up to 329 A/cm(2). Despite the large surface to volume ratio of the type-II InP-GaAs axial heterostructure nanowires, we measure peak to valley current ratios (PVCR) of up to 8.2 at room temperature and 27...

  1. Mapping the local structure of nanowires

    DEFF Research Database (Denmark)

    Persson, Johan Mikael; Wagner, Jakob Birkedal

    2013-01-01

    The crystallographic and compositional structure of heterostructured semiconductor nanowires has been studied by means of transmission electron microscopy. The native geometry of the studied InP-GaAs nanowires (80-100 nm in diameter) is in general too thick for reliable high-resolution TEM imaging...

  2. Epitaxy of advanced nanowire quantum devices

    NARCIS (Netherlands)

    Gazibegovic, S.; Car, D.; Zhang, H.; Balk, S.C.; Logan, J.A.; Moor, M.W.A. de; Cassidy, M.C.; Schmits, R.; Xu, D.; Wang, G.; Krogstrup, P.; Veld, R.L.M. op het; Zuo, K.; Vos, Y.; Shen, J.; Bouman, D.; Shojaei, B.; Pennachio, D.; Lee, J.S.; Veldhoven, P.J. van; Koelling, S.; Verheijen, M.A.; Kouwenhoven, L.P.; Palmstrøm, C.J.; Bakkers, E.P.A.M.

    2017-01-01

    Semiconductor nanowires are ideal for realizing various low-dimensional quantum devices. In particular, topological phases of matter hosting non-Abelian quasiparticles (such as anyons) can emerge when a semiconductor nanowire with strong spin-orbit coupling is brought into contact with a

  3. Functionalization of magnetic nanowires by charged biopolymers

    DEFF Research Database (Denmark)

    Magnin, D.; Callegari, V.; Mátéfi-Tempfli, Stefan

    2008-01-01

    We report on a facile method for the preparation of biocompatible and bioactive magnetic nanowires. The method consists of the direct deposition of polysaccharides by layer-by-layer (LbL) assembly onto a brush of metallic nanowires; obtained by electrodeposition of the metal within the nanopores ...

  4. Vertically aligned ZnO nanowire arrays in Rose Bengal-based dye-sensitized solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Pradhan, Basudev; Batabyal, Sudip K.; Pal, Amlan J. [Indian Association for the Cultivation of Science, Department of Solid State Physics, Kolkata 700032 (India)

    2007-05-23

    We fabricate dye-sensitized solar cells (DSSC) using vertically oriented, high density, and crystalline array of ZnO nanowires, which can be a suitable alternative to titanium dioxide nanoparticle films. The vertical nanowires provide fast routes or channels for electron transport to the substrate electrode. As an alternative to conventional ruthenium complex, we introduce Rose Bengal dye, which acts as a photosensitizer in the dye-sensitized solar cells. The dye energetically matches the ZnO with usual KI-I{sub 2} redox couple for dye-sensitized solar cell applications. (author)

  5. Growth and structural characterization of III-V semiconductor nanowires

    OpenAIRE

    Rieger, Torsten

    2015-01-01

    In this thesis, the growth and structural properties of III-V semiconductor nanowires and nanowire heterostructures are studied. These nanowires represent structures suitable for both fundamental physics and applications in electronic devices such as (tunnel) field effect transistors. The III-V nanowires are grown with molecular beam epitaxy, high κ dielectric layers are deposited conformally around the nanowires by atomic layer deposition. The morphological and structural characteristics of ...

  6. Preparation and Characterization of Tin Oxide Nanowires

    Directory of Open Access Journals (Sweden)

    A. Kabiri

    2013-12-01

    Full Text Available The aim of this research is preparation of SnO2 nanowires by means of Thermal chemical reaction vapor transport deposition (TCRVTD method from SnO powders. The morphology, chemical composition and microstructure properties of the nanowires are characterized using field emission scanning electron microscope (FE-SEM, EDS, and XRD. The XRD diffraction patterns reveal that the SnO2 nanowires have been grown in the form of tetragonal crystal structures with the lattice parameter of a=b=0.440 nm, and c=0.370 nm. The SEM images reveal that SnO2 nanowires have successfully been grown on the Si substrate. The EDS patterns show that only elements of Sn, O and Au are detected. Prior to the VLS process the substrate is coated by a thin layer of Au. The diameter of nanowires is measured to be something between 20-100 nm.

  7. Synthesis of silicon and germanium nanowires.

    Energy Technology Data Exchange (ETDEWEB)

    Clement, Teresa J. (Arizona State University); Hsu, Julia W. P.

    2007-11-01

    The vapor-liquid-solid growth process for synthesis of group-IV semiconducting nanowires using silane, germane, disilane and digermane precursor gases has been investigated. The nanowire growth process combines in situ gold seed formation by vapor deposition on atomically clean silicon (111) surfaces, in situ growth from the gaseous precursor(s), and real-time monitoring of nanowire growth as a function of temperature and pressure by a novel optical reflectometry technique. A significant dependence on precursor pressure and growth temperature for the synthesis of silicon and germanium nanowires is observed, depending on the stability of the specific precursor used. Also, the presence of a nucleation time for the onset of nanowire growth has been found using our new in situ optical reflectometry technique.

  8. Nanowires for thermal energy conversion and management

    Science.gov (United States)

    Chen, Renkun

    This dissertation presents the application of nanowires in two aspects of thermal energy conversion and management: (i) silicon (Si) nanowires as efficient and scalable thermoelectric materials due to the reduced thermal conductivity (k), and (ii) Si and copper (Cu) nanowire arrays for enhanced phase change heat transfer including boiling and evaporation and their applications in thermal management of microelectronics. In the first half of the thesis (chapter 2 and 3), we describe thermal and thermoelectric measurements of individual Si nanowires for studying phonon transport properties and their potential application in thermoelectrics. A theoretical model based on coherent phonon scattering was developed to explain the experiemental data, which suggests that phonon-boundary scattering is highly frequency dependent. For low frequency (long wavelength) phonons, the transport is nearly ballistic, whereas high frequency or short wavelength phonons scatter diffusively at nanowire boundary. The competition between the two phonon transmission regimes results in the unusual linear behavior of the thermal conductance of thin VLS Si nanowires at low temperature. Next, the thermal conductivity of EE Si nanowires, which have much rougher surface compared to VLS nanowires, was measured and found to be five-eight times lower than that of VLS counterparts with similar diameters. The substantial reduction in k is presumably due to the higher surface roughness, since both types of nanowires have single crystalline cores. In particular, for ˜ 50 nm EE Si nanowires etched from 0.1 O-cm B-doped p-Si (˜2 x 1017 cm-3 dopant concentration), the k is around 1.6 Wm-1K-1 and the kL is ˜1.2 Wm-1 K-1 at room temperature, approaching that of amorphous Si. The single nanowire measurements show the great promise of using Si nanowire arrays as high-performance, scalable thermoelectric materials. As the second focus of the thesis (chapter 4 and 5), nanowire arrays were used for enhanced phase

  9. Core-shell silicon nanowire solar cells.

    Science.gov (United States)

    Adachi, M M; Anantram, M P; Karim, K S

    2013-01-01

    Silicon nanowires can enhance broadband optical absorption and reduce radial carrier collection distances in solar cell devices. Arrays of disordered nanowires grown by vapor-liquid-solid method are attractive because they can be grown on low-cost substrates such as glass, and are large area compatible. Here, we experimentally demonstrate that an array of disordered silicon nanowires surrounded by a thin transparent conductive oxide has both low diffuse and specular reflection with total values as low as nanowire facilitates enhancement in external quantum efficiency using two different active shell materials: amorphous silicon and nanocrystalline silicon. As a result, the core-shell nanowire device exhibits a short-circuit current enhancement of 15% with an amorphous Si shell and 26% with a nanocrystalline Si shell compared to their corresponding planar devices.

  10. Superconductive silicon nanowires using gallium beam lithography.

    Energy Technology Data Exchange (ETDEWEB)

    Henry, Michael David; Jarecki, Robert Leo,

    2014-01-01

    This work was an early career LDRD investigating the idea of using a focused ion beam (FIB) to implant Ga into silicon to create embedded nanowires and/or fully suspended nanowires. The embedded Ga nanowires demonstrated electrical resistivity of 5 m-cm, conductivity down to 4 K, and acts as an Ohmic silicon contact. The suspended nanowires achieved dimensions down to 20 nm x 30 nm x 10 m with large sensitivity to pressure. These structures then performed well as Pirani gauges. Sputtered niobium was also developed in this research for use as a superconductive coating on the nanowire. Oxidation characteristics of Nb were detailed and a technique to place the Nb under tensile stress resulted in the Nb resisting bulk atmospheric oxidation for up to years.

  11. Thiolated Gold Nanowires: Metallic versus Semiconducting

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Deen [ORNL; Luo, Weidong [ORNL; Nobusada, Katsuyuki [Institute for Molecular Science, Japan; Whetten, Robert L [Georgia Institute of Technology

    2009-01-01

    Tremendous research efforts have been spent on thiolated gold nanoparticles and self-assembled monolayers of thiolate (RS-) on gold, but thiolated gold nanowires have received almost no attention. Here we computationally design two such one-dimensional nanosystems by creating a linear chain of Au icosahedra, fused together by either vertex sharing or face sharing. Then neighboring Au icosahedra are bridged by five thiolate groups for the vertex-sharing model and three RS?Au?SR motifs for the face-sharing model. We show that the vertex-sharing thiolated gold nanowire can be made either semiconducting or metallic by tuning the charge, while the face-sharing one is always metallic. We explain this difference between the two nanowires by examining their band structures and invoking a previously proposed electron-count rule. Implications of our findings for previous experimentation of gold nanowires are discussed, and a potential way to make thiolated gold nanowires is proposed.

  12. Thiolated gold nanowires: metallic versus semiconducting.

    Science.gov (United States)

    Jiang, De-en; Nobusada, Katsuyuki; Luo, Weidong; Whetten, Robert L

    2009-08-25

    Tremendous research efforts have been spent on thiolated gold nanoparticles and self-assembled monolayers of thiolate (RS-) on gold, but thiolated gold nanowires have received almost no attention. Here we computationally design two such one-dimensional nanosystems by creating a linear chain of Au icosahedra, fused together by either vertex sharing or face sharing. Then neighboring Au icosahedra are bridged by five thiolate groups for the vertex-sharing model and three RS-Au-SR motifs for the face-sharing model. We show that the vertex-sharing thiolated gold nanowire can be made either semiconducting or metallic by tuning the charge, while the face-sharing one is always metallic. We explain this difference between the two nanowires by examining their band structures and invoking a previously proposed electron-count rule. Implications of our findings for previous experimentation of gold nanowires are discussed, and a potential way to make thiolated gold nanowires is proposed.

  13. Structural and photoluminescent properties of nanowires formed by the metal-assisted chemical etching of monocrystalline silicon with different doping level

    Energy Technology Data Exchange (ETDEWEB)

    Georgobiani, V. A., E-mail: v.georgobiani@gmail.com; Gonchar, K. A.; Osminkina, L. A.; Timoshenko, V. Yu. [Lomonosov Moscow State University, Faculty of Physics (Russian Federation)

    2015-08-15

    Silicon-nanowire layers grown by the metal-assisted chemical etching of (100)-oriented p-type monocrystalline silicon substrates with a resistivity of 10 and 0.001 Ω · cm are studied by electron microscopy, Raman scattering, and photoluminescence measurements. It is established that nanowires grown on lightly doped substrates are structurally nonporous and formed as crystalline cores covered by nanocrystals 3–5 nm in dimensions. Nanowires grown on heavily doped substrates are structurally porous and contain both small nanocrystals and coarser crystallites with equilibrium charge carriers that influence interband radiative recombination. It is found that the photoluminescence intensity of nanowires in the spectral range 1.3–2.0 eV depends on the presence of molecular oxygen.

  14. Phase transitions in a LiMn2O4 nanowire battery observed by operando electron microscopy.

    Science.gov (United States)

    Lee, Soyeon; Oshima, Yoshifumi; Hosono, Eiji; Zhou, Haoshen; Kim, Kyungsu; Chang, Hansen M; Kanno, Ryoji; Takayanagi, Kunio

    2015-01-27

    Fast charge-discharge process has been reported to give a high capacity loss. A nanobattery consisting of a single LiMn2O4 nanowire cathode, ionic liquid electrolyte and lithium titanium oxide anode was developed for in situ transmission electron microscopy. When it was fully charged or discharged within a range of 4 V in less than half an hour (corresponding average C rate: 2.5C), Li-rich and Li-poor phases were observed to be separated by a transition region, and coexisted during whole process. The phase transition region moved reversibly along the nanowire axis which corresponds to the [011] direction, allowing the volume fraction of both phases to change. In the electron diffraction patterns, the Li-rich phase was seen to have the (100) orientation with respect to the incident electron beam, while the Li-poor phase had the (111̅) orientation. The orientation was changed as the transition region moved. However, the nanowire did not fracture. This suggests that a LiMn2O4 nanowire has the advantage of preventing capacity fading at high charge rates.

  15. Precise Placement of Metallic Nanowires on a Substrate by Localized Electric Fields and Inter-Nanowire Electrostatic Interaction

    Directory of Open Access Journals (Sweden)

    U Hyeok Choi

    2017-10-01

    Full Text Available Placing nanowires at the predetermined locations on a substrate represents one of the significant hurdles to be tackled for realization of heterogeneous nanowire systems. Here, we demonstrate spatially-controlled assembly of a single nanowire at the photolithographically recessed region at the electrode gap with high integration yield (~90%. Two popular routes, such as protruding electrode tips and recessed wells, for spatially-controlled nanowire alignment, are compared to investigate long-range dielectrophoretic nanowire attraction and short-range nanowire-nanowire electrostatic interaction for determining the final alignment of attracted nanowires. Furthermore, the post-assembly process has been developed and tested to make a robust electrical contact to the assembled nanowires, which removes any misaligned ones and connects the nanowires to the underlying electrodes of circuit.

  16. Pattern recognition in bees : orientation discrimination

    NARCIS (Netherlands)

    Hateren, J.H. van; Srinivasan, M.V.; Wait, P.B.

    1990-01-01

    Honey bees (Apis mellifera, worker) were trained to discriminate between two random gratings oriented perpendicularly to each other. This task was quickly learned with vertical, horizontal, and oblique gratings. After being trained on perpendicularly-oriented random gratings, bees could discriminate

  17. Green urea synthesis catalyzed by hematite nanowires in magnetic field

    Science.gov (United States)

    Yahya, Noorhana; Qureshi, Saima; Rehman, Zia ur; Alqasem, Bilal; Fai Kait, Chong

    2017-04-01

    The catalytic activity of hematite (α-Fe2O3) nanowires under the influence of magnetic field on urea synthesis is considered green. The adsorption and subsequent dissociative reaction of hydrogen, nitrogen and carbon dioxide gases on the α-Fe2O3 (111) nanowires were investigated using the density functional theory (DFT) method. The average adsorption energy is -4.12 kcal/mole at different sites. The adsorption of gases resulted in a difference in density and net spin of electrons from 68 to 120 and 0-21 respectively. In addition, it induces magnetic moment value of 36.33 μB, which confirms the enhanced magnetic behaviour of hematite. α-Fe2O3 nanowires (NWs) synthesized by heating iron wire in a box furnace at (750-800) °C and as synthesized α-Fe2O3 nanoparticles (NPs) were received to use as a catalyst in the magnetic reaction of urea synthesis. X-ray Diffractometer (XRD) confirms the peaks of rhombohedral structure of α-Fe2O3 and Raman spectrum analyses confirms the α-Fe2O3 peaks at 410 cm-1, 500 cm-1 and 616 cm-1. The needle-like shape of hematite nanowires with length ranging from 16-25) μm and diameter from 74 to 145 nm confirmed by Field emission scanning electron microscopy (FESEM). The magnetic properties of the nanowires exhibited different levels of saturation magnetization, for α-Fe2O3 perpendicularly aligned direction (13.18 emu/g) and random direction (10.73 emu/g). Urea synthesis was done under magnetic field ranges from 0.0 to 2.5 T. The activation energy of α-Fe2O3 NWs for urea production is lower than NPs in the range of 0-1 T, whereas it is reversed for higher magnetic induction values. Fourier transform infrared spectroscopy (FTIR) confirmed the formation of urea at the peaks of 1690-1600 cm-1. This green urea employing magnetically induced method could be a contender to the Haber-Bosch process currently used by the current industry which utilizes high temperature and high pressure.

  18. An investigation into the role of polyethyleneimine in chemical bath deposition of zinc oxide nanowires

    Science.gov (United States)

    Eskandari, Alireza; Abdizadeh, Hossein; Pourshaban, Erfan; Golobostanfard, Mohammad Reza

    2018-01-01

    Zinc oxide nanowires are considered as promising materials for wide range of optoelectrical and chemical devices, thanks to their desirable structural and optoelectrical properties. Over the past decade, chemical bath deposition (CBD) has been widely used to synthesize these nanostructures due to its low cost and controllability. Since improving the aspect ratio and length of nanowires is a vital issue in growing one-dimensional nanostructures, the influence of polyethyleneimine (PEI) as a complexing and chelating agent on the structural, morphological, and optoelectrical properties of ZnO nanowires has been studied in this report. As-grown ZnO nanowires synthesized by mixing deionized water, zinc acetate dihydrate, hexamethylenetetramine, and PEI were characterized with field emission scanning electron microscope (FESEM), X-ray diffractometer (XRD), and photoluminescence spectroscopy (PL). FESEM results unambiguously show that increasing PEI concentration (from 0 to 0.2 g in 50 ml DI water) reduces the diameter and density of nanowires from ˜120 to 56 nm and from ˜85% to 65%, respectively. Interestingly, although adding more PEI decreases nanowires diameter, over-increasing of PEI brings about an inappropriate nanostructures growth. Moreover, XRD patterns demonstrate that all the samples have wurtzite structure with a preferred orientation along c-axis which may be improved or deteriorated by adding PEI into the chemical bath. Accordingly, it is crucial to optimize the amount of PEI in CBD method. Near-band edge (NBE) region in PL spectrum also confirms wide bandgap of ZnO (˜3.3 eV). In addition, comparing the appearance of PEI free with PEI assisted solutions show a considerable difference in their colors, which may be attributed to the formation of new chemical compounds. Considering these results, PEI plays a couple of determining roles in synthesizing ZnO nanowires; making nanowires thinner, with selectively absorption to the non-polar, lateral facets of

  19. Homoepitaxial n-core: p-shell gallium nitride nanowires: HVPE overgrowth on MBE nanowires.

    Science.gov (United States)

    Sanders, Aric; Blanchard, Paul; Bertness, Kris; Brubaker, Matthew; Dodson, Christopher; Harvey, Todd; Herrero, Andrew; Rourke, Devin; Schlager, John; Sanford, Norman; Chiaramonti, Ann N; Davydov, Albert; Motayed, Abhishek; Tsvetkov, Denis

    2011-11-18

    We present the homoepitaxial growth of p-type, magnesium doped gallium nitride shells by use of halide vapor phase epitaxy (HVPE) on n-type gallium nitride nanowires grown by plasma-assisted molecular beam epitaxy (MBE). Scanning electron microscopy shows clear dopant contrast between the core and shell of the nanowire. The growth of magnesium doped nanowire shells shows little or no effect on the lattice parameters of the underlying nanowires, as measured by x-ray diffraction (XRD). Photoluminescence measurements of the nanowires show the appearance of sub-bandgap features in the blue and the ultraviolet, indicating the presence of acceptors. Finally, electrical measurements confirm the presence of electrically active holes in the nanowires.

  20. Superconducting tunneling on thin film gold nanowires - a platform for searching Majorana fermions

    Science.gov (United States)

    Wei, Peng; Lee, Patrick; Moodera, Jagadeesh

    The metallic surface states of (111)-oriented gold thin film has been theoretically shown to be a superior candidate for Majorana fermions (MF) due to its orders of magnitude stronger spin-orbit coupling compared to semiconductor nanowires. We experimentally demonstrate an ideal platform using heterostructure based nanowires for achieving this, and exploit quantum tunneling to probe the MFs forming at the end of the nanowires. By controlling the material properties of the tunnel barrier, we explore the peculiar behaviors of superconducting gold surface states in both pair tunneling (Josephson like) and quasiparticle tunneling regimes that may hint the signatures of MFs. Additionally, in the mesoscopic 1D gold nanowire superconductor, we observe a new superconducting phase with an energy gap much larger than any of the superconductors in the tunneling device, hinting possible unknown pairing mechanism. Our approach directly demonstrates a crucial step in achieving realistic fault-tolerant quantum computation devices based on non-abelian particles. We acknowledge John Templeton Foundation Grant-39944, NSF DMR-1207469 and ONR N00014-13-1-0301.

  1. Direct observation of shear piezoelectricity in poly-l-lactic acid nanowires

    Directory of Open Access Journals (Sweden)

    Michael Smith

    2017-07-01

    Full Text Available Piezoelectric polymers are capable of interconverting mechanical and electrical energy, and are therefore candidate materials for biomedical applications such as sensors, actuators, and energy harvesters. In particular, nanowires of these materials are attractive as they can be unclamped, flexible and sensitive to small vibrations. Poly-l-lactic acid (PLLA nanowires have been investigated for their use in biological applications, but their piezoelectric properties have never been fully characterised, even though macroscopic films and fibres have been shown to exhibit shear piezoelectricity. This piezoelectric mode is particularly interesting for in vivo applications where shear forces are especially relevant, and is similar to what has been observed in natural materials such as bone and DNA. Here, using piezo-response force microscopy (PFM, we report the first direct observation of shear piezoelectricity in highly crystalline and oriented PLLA nanowires grown by a novel template-wetting method. Our results are validated using finite-element simulations and numerical analysis, which importantly and more generally allow for accurate interpretation of PFM signals in soft nanostructured materials. Our work opens up the possibility for the development of biocompatible and sustainable piezoelectric nanogenerators and sensors based on polymer nanowires.

  2. Direct observation of shear piezoelectricity in poly-l-lactic acid nanowires

    Science.gov (United States)

    Smith, Michael; Calahorra, Yonatan; Jing, Qingshen; Kar-Narayan, Sohini

    2017-07-01

    Piezoelectric polymers are capable of interconverting mechanical and electrical energy, and are therefore candidate materials for biomedical applications such as sensors, actuators, and energy harvesters. In particular, nanowires of these materials are attractive as they can be unclamped, flexible and sensitive to small vibrations. Poly-l-lactic acid (PLLA) nanowires have been investigated for their use in biological applications, but their piezoelectric properties have never been fully characterised, even though macroscopic films and fibres have been shown to exhibit shear piezoelectricity. This piezoelectric mode is particularly interesting for in vivo applications where shear forces are especially relevant, and is similar to what has been observed in natural materials such as bone and DNA. Here, using piezo-response force microscopy (PFM), we report the first direct observation of shear piezoelectricity in highly crystalline and oriented PLLA nanowires grown by a novel template-wetting method. Our results are validated using finite-element simulations and numerical analysis, which importantly and more generally allow for accurate interpretation of PFM signals in soft nanostructured materials. Our work opens up the possibility for the development of biocompatible and sustainable piezoelectric nanogenerators and sensors based on polymer nanowires.

  3. Enhanced Cu₂S/CdS coaxial nanowire solar cells by piezo-phototronic effect.

    Science.gov (United States)

    Pan, Caofeng; Niu, Simiao; Ding, Yong; Dong, Lin; Yu, Ruomeng; Liu, Ying; Zhu, Guang; Wang, Zhong Lin

    2012-06-13

    Nanowire solar cells are promising candidates for powering nanosystems and flexible electronics. The strain in the nanowires, introduced during growth, device fabrication and/or application, is an important issue for piezoelectric semiconductor (like CdS, ZnO, and CdTe) based photovoltaic. In this work, we demonstrate the first largely enhanced performance of n-CdS/p-Cu(2)S coaxial nanowire photovoltaic (PV) devices using the piezo-phototronics effect when the PV device is subjected to an external strain. Piezo-phototronics effect could control the electron-hole pair generation, transport, separation, and/or recombination, thus enhanced the performance of the PV devices by as high as 70%. This effect offers a new concept for improving solar energy conversation efficiency by designing the orientation of the nanowires and the strain to be purposely introduced in the packaging of the solar cells. This study shed light on the enhanced flexible solar cells for applications in self-powered technology, environmental monitoring, and even defensive technology.

  4. Spin-orbit coupling in semiconductor nanowires: Physical limits for Majorana states

    Science.gov (United States)

    de Campos, Tiago; Sipahi, Guilherme; de Faria Junior, Paulo Eduardo; Bastos, Carlos; Zutic, Igor; Gmitra, Martin; Fabian, Jaroslav

    2015-03-01

    Proximity induced superconductivity in semiconductor nanowires with spin-orbit coupling (SOC) provides a promising realization of Majorana fermions. While SOC is typically included within only the first conduction band, such simplified models lack a more detailed understanding of Majorana fermions and their implementation. We perform systematic and comprehensive numerical investigations of SOC in zinc-blende and wurtzite semiconductor cylindrical nanowires. We employ the k.p method, with input parameters fitted to first-principles calculations, to determine realistic values of the Rashba and Dresselhaus spin-orbit fields in nanowires of varying diameters. Specifically, we use a state of the art 14 band k.p formalism together with the envelope function approach to obtain the electronic band structure for various compounds, and analyze the effect of the quantum confinement on the effective masses and spin-orbit splitting of the subbands. We also make specific suggestions towards the optimal orientation and geometry, evaluating the prospects of the nanowires as platforms to observe Majorana states. J. F. and M. G. ackowledge support from DFG SFB 689.

  5. Distributed Array of Polymeric Piezo-nanowires through Hard-Templating Method into Porous Alumina

    Directory of Open Access Journals (Sweden)

    Valentina CAUDA

    2011-10-01

    Full Text Available We report on the preparation of ferroelectric polymeric nanowires through hard-templating strategy. Wet-impregnation of poly(vinylidene fluoride (PVDF and its copolymer poly(vinylidene fluoride-tri fluoro ethylene [P(VDF TrFE] was performed into commercially available porous Anodic Alumina Membrane (AAM. The polymeric nanowires show a diameter ranging from 144 to 166 nm, a length of tenth of micron and a high filling ratio of the alumina pores. X-ray diffraction pattern and infrared spectroscopy show the crystallization of both polymers into the ferroelectric β phase. In addition, Curie temperature (Tc tests show an increase to higher Tc for the PVDF-TrFE polymeric nanowires with respect to the bulk polymeric material, thus revealing the importance of confined crystallization into mono-dimensional structures. A piezoelectric behavior was also observed by a voltage generation upon mechanical pressure, without pre-poling or mechanically orienting the polymer. These crystalline piezoelectric nanowires distributed in a vertical array would potentially address applications like mechanical pressure sensors, e.g., in robotics.

  6. Giant piezoelectric size effects in zinc oxide and gallium nitride nanowires. A first principles investigation.

    Science.gov (United States)

    Agrawal, Ravi; Espinosa, Horacio D

    2011-02-09

    Nanowires made of materials with noncentrosymmetric crystal structure are under investigation for their piezoelectric properties and suitability as building blocks for next-generation self-powered nanodevices. In this work, we investigate the size dependence of piezoelectric coefficients in nanowires of two such materials - zinc oxide and gallium nitride. Nanowires, oriented along their polar axis, ranging from 0.6 to 2.4 nm in diameter were modeled quantum mechanically. A giant piezoelectric size effect is identified for both GaN and ZnO nanowires. However, GaN exhibits a larger and more extended size dependence than ZnO. The observed size effect is discussed in the context of charge redistribution near the free surfaces leading to changes in local polarization. The study reveals that local changes in polarization and reduction of unit cell volume with respect to bulk values lead to the observed size effect. These results have strong implication in the field of energy harvesting, as piezoelectric voltage output scales with the piezoelectric coefficient.

  7. Oxide nanowires for solar cell applications.

    Science.gov (United States)

    Zhang, Qifeng; Yodyingyong, Supan; Xi, Junting; Myers, Daniel; Cao, Guozhong

    2012-03-07

    Oxide nanowire arrays were studied for their applications to solar cells. It was demonstrated that the nanowires could provide direct pathways for electron transport in dye-sensitized solar cells and therefore, while forming photoelectrode films, they offered better suppression of charge recombination than nanoparticles. However, the photoelectron films consisting of nanowires suffered a disadvantage in giving large surface area for dye adsorption. Such a shortcoming of nanowires had been exemplified in this paper illustrating that it could be well compensated by incorporating with nanoparticles to form a nanoparticle-nanowire array hybrid photoelectrode film. The oxide nanowires were also demonstrated to be able to enhance the performance of inverted structure polymer solar cells as a cathode buffer layer by establishing a large interface with the polymers so as to facilitate the transport of photogenerated electrons from the polymer to the electron collecting electrode. Such an enhancement effect could be further boosted while the nanowires were replaced with nanotubes; the latter may build up larger interface with the polymers than the former and therefore facilitates the electron transport more efficiently.

  8. One step biofunctionalized electrospun multiwalled carbon nanotubes embedded zinc oxide nanowire interface for highly sensitive detection of carcinoma antigen-125.

    Science.gov (United States)

    Paul, K Brince; Singh, Vikrant; Vanjari, Siva Rama Krishna; Singh, Shiv Govind

    2017-02-15

    Ovarian cancer is the most leading cause of cancer-related death in women . The carcinoma antigen-125, which is found on the surface of many ovarian cancer cells is known to be a gold standard clinical biomarker associated with life-threatening gynecological malignancy. In this work, we demonstrate a novel biosensor platform based on multiwalled carbon nanotubes embedded zinc oxide nanowire for the ultrasensitive detection of carcinoma antigen-125. Label free detection of the carcinoma antigen-125 was accomplished by differential voltammetry technique that demonstrated excellent sensitivity (90.14µA/(U/mL)/cm2) with a detection limit of 0.00113UmL-1 concentration. The fabricated immunosensor exhibits good performance with wider detection range (0.001UmL-1-1kUmL-1), reproducibility, selectivity, acceptable stability, and thus is a potential cost-effective methodology for point-of-care diagnosis. The multiwalled carbon nanotubes (MWCNTs) embedded highly oriented zinc oxide (ZnO) nanowires were synthesized by simple, low cost electrospinning technique. Compared to pure ZnO nanowires, electrochemical activity of MWCNTs embedded ZnO nanowires was found to be much higher. The calcination temperature was optimized to avoid any decomposition of the CNTs and to obtain multiwalled carbon nanotubes embedded highly crystalline ZnO nanowires. The salient feature of this biosensing platform is that one step calcination process is enough to create the functional groups on MWCNT-ZnO nanowire surface that are effective for the covalent conjugation of antibody without further surface modification. To the best of our knowledge, this is the first report on MWCNT-ZnO nanowire based immunosensor explored for the detection of cancer biomarker. Copyright © 2016 Elsevier B.V. All rights reserved.

  9. Review on photonic properties of nanowires for photovoltaics.

    Science.gov (United States)

    Mokkapati, S; Jagadish, C

    2016-07-25

    III-V semiconductor nanowires behave as optical antennae because of their shape anisotropy and high refractive index. The antennae like behavior modifies the absorption and emission properties of nanowires compared to planar materials. Nanowires absorb light more efficiently compared to an equivalent volume planar material, leading to higher short circuit current densities. The modified emission from the nanowires has the potential to increase the open circuit voltage from nanowire solar cells compared to planar solar cells. In order to achieve high efficiency nanowire solar cells it is essential to control the surface state density and doping in nanowires. We review the physics of nanowire solar cells and progress made in addressing the surface recombination and doping of nanowires, with emphasis on GaAs and InP materials.

  10. Giant exchange bias and its angular dependence in Co/CoO core-shell nanowire assemblies

    Energy Technology Data Exchange (ETDEWEB)

    Gandha, Kinjal; Chaudhary, Rakesh P.; Mohapatra, Jeotikanta; Koymen, Ali R.; Liu, J. Ping, E-mail: pliu@uta.edu

    2017-07-12

    The exchange-bias field (H{sub EB}) and its angular dependence are systematically investigated in Co/CoO core-shell nanowire assemblies (∼15 nm in diameter and ∼200 nm in length) consisting of single-crystalline Co core and polycrystalline CoO shell. Giant exchange-bias field (H{sub EB}) up to 2.4 kOe is observed below a blocking temperature (T{sub EB} ∼150 K) in the aligned Co/CoO nanowire assemblies. It is also found that there is an angular dependence between the H{sub EB} and the applied magnetization direction. The H{sub EB} showed a peak at 30° between the applied field and the nanowire aligned direction, which may be attributed to the noncollinear spin orientations at the interface between the ferromagnetic core and the antiferromagnetic shell. This behavior is quantitatively supported by an analytical calculation based on Stoner–Wohlfarth model. This study underlines the importance of the competing magnetic anisotropies at the interface of Co/CoO core-shell nanowires. - Highlights: • Giant exchange bias is observed in oriented Co/CoO core-shell nanowire assemblies. • Study of angular and temperature dependence of the exchange bias effect. • Competing magnetic anisotropies at the interface of Co/CoO core-shell nanowires. • Effect of misaligned spins in FM/AFM interface on angular dependence of exchange bias. • We explain the analytical model that accounts for experimental results.

  11. ZnO-nanowire as a nanogenerator?

    Energy Technology Data Exchange (ETDEWEB)

    Schubert, Markus Andreas; Senz, Stephan; Alexe, Marin; Goesele, Ulrich [Max Planck Institut fuer Mikrostrukturphysik, Halle (Germany)

    2008-07-01

    Recently nanogenerators for powering nanodevices were reported in which ZnO-nanowire arrays convert mechanical energy in electrical energy by bending the ZnO-nanowires. We simulate the experiments in which the ZnO nanowires were bent by AFM tip by FEM-calculations for an ideal nonconducting piezoelectric ZnO-nanowire with a length of 600 nm and a diameter of 50 nm fixed perpendicular to a substrate. The top part of this nanowire was bent about 140 nm by a force applied at the top of the nanowire. At the point of the applied force the electrical potential has a maximum of +1.3 V. In the rest of the nanowire the electrical potential is +0.3 V for the stretched side and -0.3 V for the compressed. The piezoelectric charge generate the signal on the capacitance between the two sides, which is about 10{sup -5} pF for the whole wire. A lower value of 10{sup -7} pF is estimated for the AFM point contact. However, most ZnO-nanowires are n-doped semiconductors with a typically resistivity of 1 {omega}cm. One consequence is a very fast discharging of the piezoelectric generate charge in the order of magnitude of 1 ps. Even, in the case of an ideal nonconducting nanowire, the voltage at the input capacity of any preamplifier ({proportional_to}1-5 pF) would be of the order of 10{sup -7} V, which corresponds to a charge of about one electron.

  12. TiO2 nanowire-templated hierarchical nanowire network as water-repelling coating

    Science.gov (United States)

    Hang, Tian; Chen, Hui-Jiuan; Xiao, Shuai; Yang, Chengduan; Chen, Meiwan; Tao, Jun; Shieh, Han-ping; Yang, Bo-ru; Liu, Chuan; Xie, Xi

    2017-12-01

    Extraordinary water-repelling properties of superhydrophobic surfaces make them novel candidates for a great variety of potential applications. A general approach to achieve superhydrophobicity requires low-energy coating on the surface and roughness on nano- and micrometre scale. However, typical construction of superhydrophobic surfaces with micro-nano structure through top-down fabrication is restricted by sophisticated fabrication techniques and limited choices of substrate materials. Micro-nanoscale topographies templated by conventional microparticles through surface coating may produce large variations in roughness and uncontrollable defects, resulting in poorly controlled surface morphology and wettability. In this work, micro-nanoscale hierarchical nanowire network was fabricated to construct self-cleaning coating using one-dimensional TiO2 nanowires as microscale templates. Hierarchical structure with homogeneous morphology was achieved by branching ZnO nanowires on the TiO2 nanowire backbones through hydrothermal reaction. The hierarchical nanowire network displayed homogeneous micro/nano-topography, in contrast to hierarchical structure templated by traditional microparticles. This hierarchical nanowire network film exhibited high repellency to both water and cell culture medium after functionalization with fluorinated organic molecules. The hierarchical structure templated by TiO2 nanowire coating significantly increased the surface superhydrophobicity compared to vertical ZnO nanowires with nanotopography alone. Our results demonstrated a promising strategy of using nanowires as microscale templates for the rational design of hierarchical coatings with desired superhydrophobicity that can also be applied to various substrate materials.

  13. Optical properties of heavily doped GaAs nanowires and electroluminescent nanowire structures

    Energy Technology Data Exchange (ETDEWEB)

    Lysov, A; Offer, M; Gutsche, C; Regolin, I; Geller, M; Prost, W; Tegude, F-J [Center for Nanointegration Duisburg-Essen, University of Duisburg-Essen, D-47048 Duisburg (Germany); Topaloglu, S, E-mail: andrey.lysov@uni-due.de [Department of Electronics Engineering, Maltepe University, Marmara Egitim Koeyue, 34857, Maltepe, Istanbul (Turkey)

    2011-02-25

    We present GaAs electroluminescent nanowire structures fabricated by metal organic vapor phase epitaxy. Electroluminescent structures were realized in both axial pn-junctions in single GaAs nanowires and free-standing nanowire arrays with a pn-junction formed between nanowires and substrate, respectively. The electroluminescence emission peak from single nanowire pn-junctions at 10 K was registered at an energy of around 1.32 eV and shifted to 1.4 eV with an increasing current. The line is attributed to the recombination in the compensated region present in the nanowire due to the memory effect of the vapor-liquid-solid growth mechanism. Arrayed nanowire electroluminescent structures with a pn-junction formed between nanowires and substrate demonstrated at 5 K a strong electroluminescence peak at 1.488 eV and two shoulder peaks at 1.455 and 1.519 eV. The main emission line was attributed to the recombination in the p-doped GaAs. The other two lines correspond to the tunneling-assisted photon emission and band-edge recombination in the abrupt junction, respectively. Electroluminescence spectra are compared with the micro-photoluminescence spectra taken along the single p-, n- and single nanowire pn-junctions to find the origin of the electroluminescence peaks, the distribution of doping species and the sharpness of the junctions.

  14. Optical properties of heavily doped GaAs nanowires and electroluminescent nanowire structures

    Science.gov (United States)

    Lysov, A.; Offer, M.; Gutsche, C.; Regolin, I.; Topaloglu, S.; Geller, M.; Prost, W.; Tegude, F.-J.

    2011-02-01

    We present GaAs electroluminescent nanowire structures fabricated by metal organic vapor phase epitaxy. Electroluminescent structures were realized in both axial pn-junctions in single GaAs nanowires and free-standing nanowire arrays with a pn-junction formed between nanowires and substrate, respectively. The electroluminescence emission peak from single nanowire pn-junctions at 10 K was registered at an energy of around 1.32 eV and shifted to 1.4 eV with an increasing current. The line is attributed to the recombination in the compensated region present in the nanowire due to the memory effect of the vapor-liquid-solid growth mechanism. Arrayed nanowire electroluminescent structures with a pn-junction formed between nanowires and substrate demonstrated at 5 K a strong electroluminescence peak at 1.488 eV and two shoulder peaks at 1.455 and 1.519 eV. The main emission line was attributed to the recombination in the p-doped GaAs. The other two lines correspond to the tunneling-assisted photon emission and band-edge recombination in the abrupt junction, respectively. Electroluminescence spectra are compared with the micro-photoluminescence spectra taken along the single p-, n- and single nanowire pn-junctions to find the origin of the electroluminescence peaks, the distribution of doping species and the sharpness of the junctions.

  15. Optical properties of heavily doped GaAs nanowires and electroluminescent nanowire structures.

    Science.gov (United States)

    Lysov, A; Offer, M; Gutsche, C; Regolin, I; Topaloglu, S; Geller, M; Prost, W; Tegude, F-J

    2011-02-25

    We present GaAs electroluminescent nanowire structures fabricated by metal organic vapor phase epitaxy. Electroluminescent structures were realized in both axial pn-junctions in single GaAs nanowires and free-standing nanowire arrays with a pn-junction formed between nanowires and substrate, respectively. The electroluminescence emission peak from single nanowire pn-junctions at 10 K was registered at an energy of around 1.32 eV and shifted to 1.4 eV with an increasing current. The line is attributed to the recombination in the compensated region present in the nanowire due to the memory effect of the vapor-liquid-solid growth mechanism. Arrayed nanowire electroluminescent structures with a pn-junction formed between nanowires and substrate demonstrated at 5 K a strong electroluminescence peak at 1.488 eV and two shoulder peaks at 1.455 and 1.519 eV. The main emission line was attributed to the recombination in the p-doped GaAs. The other two lines correspond to the tunneling-assisted photon emission and band-edge recombination in the abrupt junction, respectively. Electroluminescence spectra are compared with the micro-photoluminescence spectra taken along the single p-, n- and single nanowire pn-junctions to find the origin of the electroluminescence peaks, the distribution of doping species and the sharpness of the junctions.

  16. Quantum plasmonic waveguides: Au nanowires

    Science.gov (United States)

    Cordaro, C. E. A.; Piccitto, G.; Priolo, F.

    2017-11-01

    Combining miniaturization and good operating speed is a compelling yet crucial task for our society. Plasmonic waveguides enable the possibility of carrying information at optical operating speed while maintaining the dimension of the device in the nanometer range. Here we present a theoretical study of plasmonic waveguides extending our investigation to structures so small that Quantum Size Effects (QSE) become non-negligible, namely quantum plasmonic waveguides. Specifically, we demonstrate and evaluate a blue-shift in Surface Plasmon (SP) resonance energy for an ultra-thin gold nanowire.

  17. Patient orientation and professional orientation of Dutch dentists.

    Science.gov (United States)

    Bruers, J Josef M; Felling, Albert J A; Truin, Gert Jan; van't Hof, Martin A; van Rossum, Ger M J M

    2004-04-01

    By providing dental health care, dentists dedicate themselves to the preservation and/or improvement of oral health in their patients. By adequately carrying out this care providers' role, dentists will gain recognition, esteem and respect from both patients and colleagues. This analysis aims to assess the patient and professional orientation of dentists and investigate which of their personal and practice characteristics can be regarded determining for these two aspects of their role as care providers. In the year 2000, data was collected via a written questionnaire sent to a random, stratified sample of 790 dentists, of whom 607 (77%) responded. Multivariate regression analysis shows that the preventive treatment concept, professional satisfaction and the number of hours per week that household tasks are performed are positive determinants for dentists' patient orientation. Also, the longer dentists are active in their profession, the more patient oriented they will be, and with more hours per week support from oral hygienists they are less patient oriented. As for professional orientation, dentists' preventive treatment concept and their professional satisfaction can also be considered positive determinants. Furthermore, dentists are more profession oriented when their partner works in the practice, with more hours per week support from oral hygienist(s) and with more collaboration contacts with other care providers. Compared to men, women are on average less profession oriented. Among Dutch dentists, there exist clear differences in the way they take on their role as care providers with regard to patient orientation and professional orientation.

  18. Orienteering club

    CERN Multimedia

    Club d'orientation

    2015-01-01

    Course d'orientation La reprise des courses d’orientation était attendue dans la région puisque près de 150 coureurs ont participé à la première épreuve automnale organisée par le club d’orientation du CERN sur le site de La Faucille. Les circuits ont été remportés par Yann Locatelli du club d’Orientation Coeur de Savoie avec 56 secondes d’avance sur Damien Berguerre du club SOS Sallanches pour le parcours technique long, Marie Vuitton du club CO CERN (membre également de l’Equipe de France Jeune) pour le parcours technique moyen avec presque 4 minutes d’avance sur Jeremy Wichoud du club Lausanne-Jorat, Victor Dannecker pour le circuit technique court devant Alina Niggli, Elliot Dannecker pour le facile moyen et Alice Merat sur le facile court, tous membres du club O’Jura. Les résultats comp...

  19. Green urea synthesis catalyzed by hematite nanowires in magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Yahya, Noorhana, E-mail: noorhana_yahya@petronas.com.my; Qureshi, Saima; Rehman, Zia ur; Alqasem, Bilal; Fai Kait, Chong

    2017-04-15

    The catalytic activity of hematite (α-Fe{sub 2}O{sub 3}) nanowires under the influence of magnetic field on urea synthesis is considered green. The adsorption and subsequent dissociative reaction of hydrogen, nitrogen and carbon dioxide gases on the α-Fe{sub 2}O{sub 3} (111) nanowires were investigated using the density functional theory (DFT) method. The average adsorption energy is −4.12 kcal/mole at different sites. The adsorption of gases resulted in a difference in density and net spin of electrons from 68 to 120 and 0–21 respectively. In addition, it induces magnetic moment value of 36.33 µB, which confirms the enhanced magnetic behaviour of hematite. α-Fe{sub 2}O{sub 3} nanowires (NWs) synthesized by heating iron wire in a box furnace at (750−800) °C and as synthesized α-Fe{sub 2}O{sub 3} nanoparticles (NPs) were received to use as a catalyst in the magnetic reaction of urea synthesis. X-ray Diffractometer (XRD) confirms the peaks of rhombohedral structure of α-Fe{sub 2}O{sub 3} and Raman spectrum analyses confirms the α-Fe{sub 2}O{sub 3} peaks at 410 cm{sup −1}, 500 cm{sup −1} and 616 cm{sup −1}. The needle-like shape of hematite nanowires with length ranging from 16–25) μm and diameter from 74 to 145 nm confirmed by Field emission scanning electron microscopy (FESEM). The magnetic properties of the nanowires exhibited different levels of saturation magnetization, for α-Fe{sub 2}O{sub 3} perpendicularly aligned direction (13.18 emu/g) and random direction (10.73 emu/g). Urea synthesis was done under magnetic field ranges from 0.0 to 2.5 T. The activation energy of α-Fe{sub 2}O{sub 3} NWs for urea production is lower than NPs in the range of 0–1 T, whereas it is reversed for higher magnetic induction values. Fourier transform infrared spectroscopy (FTIR) confirmed the formation of urea at the peaks of 1690–1600 cm{sup −1}. This green urea employing magnetically induced method could be a contender to the Haber-Bosch process

  20. Optical Properties of Rotationally Twinned Nanowire Superlattices

    DEFF Research Database (Denmark)

    Bao, Jiming; Bell, David C.; Capasso, Federico

    2008-01-01

    blende InP nanowires. We have constructed the energy band diagram of the resulting multiquantum well heterostructure and have performed detailed quantum mechanical calculations of the electron and hole wave functions. The excitation power dependent blue-shift of the photoluminescence can be explained...... a heterostructure in a chemically homogeneous nanowire material and alter in a major way its optical properties opens new possibilities for band-structure engineering.......We have developed a technique so that both transmission electron microscopy and microphotoluminescence can be performed on the same semiconductor nanowire over a large range of optical power, thus allowing us to directly correlate structural and optical properties of rotationally twinned zinc...

  1. Antimonide Heterostructure Nanowires - Growth, Physics and Devices

    OpenAIRE

    Borg, Mattias

    2012-01-01

    This thesis investigates the growth and application of antimonide heterostructure nanowires for low-power electronics. In the first part of the thesis, GaSb, InSb and InAsSb nanowire growth is presented, and the distinguishing features of the growth are described. It is found that the presence of Sb results in more than 50 at. % group-III concentration in the Au seed particle on top of the nanowires. It is further concluded that the effective V/III ratio inside the seed particle is reduced co...

  2. Semiconductor Nanowires: What's Next?

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Peidong; Yan, Ruoxue; Fardy, Melissa

    2010-04-28

    In this perspective, we take a critical look at the research progress within the nanowire community for the past decade. We discuss issues on the discovery of fundamentally new phenomena versus performance benchmarking for many of the nanowire applications. We also notice that both the bottom-up and top-down approaches have played important roles in advancing our fundamental understanding of this new class of nanostructures. Finally we attempt to look into the future and offer our personal opinions on what the future trends will be in nanowire research.

  3. Electrodeposited L10 CoPt nanowires

    DEFF Research Database (Denmark)

    Mallet, J.; Yu-Zhang, K.; Mátéfi-Tempfli, Stefan

    2005-01-01

    Arrays of face-centred cubic (fee) CoPt (0.45 nanowires were electrodeposited into thin film nanoporous alumina supported on a Si substrate. The heat treatment under specific conditions was then carried out in order to transform the fee phase into the face-centred tetragonal or L1 ordered...... phase. The influence of both the phase transition and the temperature on the magnetic properties of Co Pt nanowires has been studied. Coercive fields higher than 1 T (10kOe) have been obtained at room temperature with ordered nanowires, 80 nm in diameter....

  4. Silicon carbide nanowires: synthesis and cathodoluminescence

    Energy Technology Data Exchange (ETDEWEB)

    Huczko, Andrzej; Dabrowska, Agnieszka [Department of Chemistry, Warsaw University (Poland); Savchyn, Volodymyr; Karbovnyk, Ivan [Department of Electronics, Ivan Franko National University of Lviv (Ukraine); Popov, Anatoli I. [Institut Laue-Langevin, Grenoble (France); Institute of Solid State Physics, University of Latvia, Riga (Latvia)

    2009-12-15

    Silicon carbide nanowires have been synthesized via a combustion synthesis route. Structural studies showed that obtained SiC nanowires belong dominantly to 3C polytype with zincblend structure. Cathodoluminescence spectra from these nanostructures within the temperature range of 77..300 K, show obvious differences with respect to the bulk materials. The exciton band of the bulk 3C-SiC is significantly damped and the prevailing line is found to be at 1.99 eV (77 K), proving the key role of defect centers in optical properties of the investigated nanomaterial. Purified SiC nanowires. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  5. Biofunctionalization of zinc oxide nanowires for DNA sensory applications

    Directory of Open Access Journals (Sweden)

    Rudolph Bettina

    2011-01-01

    Full Text Available Abstract We report on the biofunctionalization of zinc oxide nanowires for the attachment of DNA target molecules on the nanowire surface. With the organosilane glycidyloxypropyltrimethoxysilane acting as a bifunctional linker, amino-modified capture molecule oligonucleotides have been immobilized on the nanowire surface. The dye-marked DNA molecules were detected via fluorescence microscopy, and our results reveal a successful attachment of DNA capture molecules onto the nanowire surface. The electrical field effect induced by the negatively charged attached DNA molecules should be able to control the electrical properties of the nanowires and gives way to a ZnO nanowire-based biosensing device.

  6. Electrically pumped waveguide lasing from ZnO nanowires.

    Science.gov (United States)

    Chu, Sheng; Wang, Guoping; Zhou, Weihang; Lin, Yuqing; Chernyak, Leonid; Zhao, Jianze; Kong, Jieying; Li, Lin; Ren, Jingjian; Liu, Jianlin

    2011-07-03

    Ultraviolet semiconductor lasers are widely used for applications in photonics, information storage, biology and medical therapeutics. Although the performance of gallium nitride ultraviolet lasers has improved significantly over the past decade, demand for lower costs, higher powers and shorter wavelengths has motivated interest in zinc oxide (ZnO), which has a wide direct bandgap and a large exciton binding energy. ZnO-based random lasing has been demonstrated with both optical and electrical pumping, but random lasers suffer from reduced output powers, unstable emission spectra and beam divergence. Here, we demonstrate electrically pumped Fabry-Perot type waveguide lasing from laser diodes that consist of Sb-doped p-type ZnO nanowires and n-type ZnO thin films. The diodes exhibit highly stable lasing at room temperature, and can be modelled with finite-difference time-domain methods.

  7. ZnO-ZnGa2O4 core-shell nanowire array for stable photoelectrochemical water splitting

    Science.gov (United States)

    Zhong, Miao; Li, Yanbo; Yamada, Ichiro; Delaunay, Jean-Jacques

    2012-02-01

    A dense array of vertically aligned ZnO-ZnGa2O4 core-shell nanowires was synthesized on a large scale on an a-plane sapphire substrate by a simple two-step chemical vapor deposition method. The ZnO cores and ZnGa2O4 shells of the nanowires are of single crystal quality and have aligned crystallographic orientations as evidenced from XRD and TEM analyses. Mott-Schottky analysis and voltage onset from the photocurrent-voltage curve confirm an n-type semiconductor property, a flat-band potential of -0.4 V (versus NHE) and a carrier density of 7 × 1018 cm-3 for the ZnO-ZnGa2O4 core-shell nanowires. A stable and large photocurrent of 1.2 mA cm-2 was obtained with the ZnO-ZnGa2O4 core-shell nanowire array when used as a photoanode at an applied bias of +0.7 V (versus Ag/AgCl) under a 300 W xenon lamp illumination. Moreover, a low dark current of ZnGa2O4 nanowire array. These results suggest that the dense array of ZnO-ZnGa2O4 core-shell nanowires provides enhanced electronic properties and stable anti-photocorrosion ability and, therefore, is promising as a photoanode in photoelectrochemical water splitting.A dense array of vertically aligned ZnO-ZnGa2O4 core-shell nanowires was synthesized on a large scale on an a-plane sapphire substrate by a simple two-step chemical vapor deposition method. The ZnO cores and ZnGa2O4 shells of the nanowires are of single crystal quality and have aligned crystallographic orientations as evidenced from XRD and TEM analyses. Mott-Schottky analysis and voltage onset from the photocurrent-voltage curve confirm an n-type semiconductor property, a flat-band potential of -0.4 V (versus NHE) and a carrier density of 7 × 1018 cm-3 for the ZnO-ZnGa2O4 core-shell nanowires. A stable and large photocurrent of 1.2 mA cm-2 was obtained with the ZnO-ZnGa2O4 core-shell nanowire array when used as a photoanode at an applied bias of +0.7 V (versus Ag/AgCl) under a 300 W xenon lamp illumination. Moreover, a low dark current of ZnGa2O4 nanowire array

  8. Topological Insulator Nanowires and Nanoribbons

    KAUST Repository

    Kong, Desheng

    2010-01-13

    Recent theoretical calculations and photoemission spectroscopy measurements on the bulk Bi2Se3 material show that it is a three-dimensional topological insulator possessing conductive surface states with nondegenerate spins, attractive for dissipationless electronics and spintronics applications. Nanoscale topological insulator materials have a large surface-to-volume ratio that can manifest the conductive surface states and are promising candidates for devices. Here we report the synthesis and characterization of high quality single crystalline Bi2Se5 nanomaterials with a variety of morphologies. The synthesis of Bi 2Se5 nanowires and nanoribbons employs Au-catalyzed vapor-liquid-solid (VLS) mechanism. Nanowires, which exhibit rough surfaces, are formed by stacking nanoplatelets along the axial direction of the wires. Nanoribbons are grown along [1120] direction with a rectangular cross-section and have diverse morphologies, including quasi-one-dimensional, sheetlike, zigzag and sawtooth shapes. Scanning tunneling microscopy (STM) studies on nanoribbons show atomically smooth surfaces with ∼ 1 nm step edges, indicating single Se-Bi-Se-Bi-Se quintuple layers. STM measurements reveal a honeycomb atomic lattice, suggesting that the STM tip couples not only to the top Se atomic layer, but also to the Bi atomic layer underneath, which opens up the possibility to investigate the contribution of different atomic orbitais to the topological surface states. Transport measurements of a single nanoribbon device (four terminal resistance and Hall resistance) show great promise for nanoribbons as candidates to study topological surface states. © 2010 American Chemical Society.

  9. Nanopatterning of ultrananocrystalline diamond nanowires.

    Science.gov (United States)

    Wang, Xinpeng; Ocola, Leonidas E; Divan, Ralu S; Sumant, Anirudha V

    2012-02-24

    We report the fabrication of horizontally aligned ultrananocrystalline diamond (UNCD) nanowires (NWs) via two different approaches. First, with the top-down approach by using electron beam lithography (EBL) and reactive ion etching (RIE) with a photo resist layer as an etch mask. Using this approach, we demonstrate fabrication of 50 µm long UNCD NWs with widths as narrow as 40 nm. We further present an alternative approach to grow UNCD NWs at pre-defined positions through a selective seeding process. No RIE was needed either to etch the NWs or to remove the mask. In this case, we achieved UNCD NWs with lengths of 50 µm and smallest width of 90 nm respectively. Characterization of these nanowires by using scanning electron microscopy (SEM) and atomic force microscopy (AFM) shows that the UNCD NWs are well defined and fully released, with no indication of residual stress. Characterization using visible and ultraviolet (UV) Raman spectroscopy indicates that in both fabrication approaches, UNCD NWs maintain their intrinsic diamond structure.

  10. Nanopatterning of ultrananocrystalline diamond nanowires

    Science.gov (United States)

    Wang, Xinpeng; Ocola, Leonidas E.; Divan, Ralu S.; Sumant, Anirudha V.

    2012-02-01

    We report the fabrication of horizontally aligned ultrananocrystalline diamond (UNCD) nanowires (NWs) via two different approaches. First, with the top-down approach by using electron beam lithography (EBL) and reactive ion etching (RIE) with a photo resist layer as an etch mask. Using this approach, we demonstrate fabrication of 50 µm long UNCD NWs with widths as narrow as 40 nm. We further present an alternative approach to grow UNCD NWs at pre-defined positions through a selective seeding process. No RIE was needed either to etch the NWs or to remove the mask. In this case, we achieved UNCD NWs with lengths of 50 µm and smallest width of 90 nm respectively. Characterization of these nanowires by using scanning electron microscopy (SEM) and atomic force microscopy (AFM) shows that the UNCD NWs are well defined and fully released, with no indication of residual stress. Characterization using visible and ultraviolet (UV) Raman spectroscopy indicates that in both fabrication approaches, UNCD NWs maintain their intrinsic diamond structure.

  11. Twins and strain relaxation in zinc-blende GaAs nanowires grown on silicon

    Energy Technology Data Exchange (ETDEWEB)

    Piñero, J.C., E-mail: josecarlos.pinero@uca.es [Dpto. Ciencias de los Materiales, Universidad de Cádiz, 11510, Puerto Real, Cádiz (Spain); Araújo, D.; Pastore, C.E.; Gutierrez, M. [Dpto. Ciencias de los Materiales, Universidad de Cádiz, 11510, Puerto Real, Cádiz (Spain); Frigeri, C. [Istituto CNR-IMEM Parco Area delle Scienze 37/A, Fontanini, 43010, Parma (Italy); Benali, A.; Lelièvre, J.F.; Gendry, M. [INL-Institut des Nanotechnologies de Lyon, UMR 5270 Ecole Centrale de Lyon 36, Avenue Guy de Collongue, 69134, Ecully Cedex (France)

    2017-02-15

    Highlights: • A TEM-HREM study of GaAs nanowires, growth over Si, is presented. • Misfit dislocations are detected in the Si/GaAs magma interface. • The study demonstrates strain relaxation through twin formation in some nanowires. - Abstract: To integrate materials with large lattice mismatch as GaAs on silicon (Si) substrate, one possible approach, to improve the GaAs crystalline quality, is to use nanowires (NWs) technology. In the present contribution, NWs are grown on <111> oriented Si substrates by molecular beam epitaxy (MBE) using vapor-liquid-solid (VLS) method. Transmission electron microscopy (TEM) analyses show that NWs are mainly grown alternating wurtzite and zinc blend (ZB) phases, and only few are purely ZB. On the latter, High Resolution Electron Microscopy (HREM) evidences the presence of twins near the surface of the NW showing limited concordance with the calculations of Yuan (2013) [1], where {111} twin planes in a <111>-oriented GaAs NW attain attractive interactions mediated by surface strain. In addition, such twins allow slight strain relaxation and are probably induced by the local huge elastic strain observed by HREM in the lattice between the twin and the surface. The latter is attributed to some slight bending of the NW as shown by the inversion of the strain from one side to the other side of the NW.

  12. Steering acoustically propelled nanowire motors toward cells in a biologically compatible environment using magnetic fields.

    Science.gov (United States)

    Ahmed, Suzanne; Wang, Wei; Mair, Lamar O; Fraleigh, Robert D; Li, Sixing; Castro, Luz Angelica; Hoyos, Mauricio; Huang, Tony Jun; Mallouk, Thomas E

    2013-12-31

    The recent discovery of fuel-free propulsion of nanomotors using acoustic energy has provided a new avenue for using nanomotors in biocompatible media. Crucial to the application of nanomotors in biosensing and biomedical applications is the ability to remotely control and steer them toward targets of interest, such as specific cells and tissues. We demonstrate in vitro magnetic steering of acoustically powered nanorod motors in a biologically compatible environment. Steering was accomplished by incorporating (40 ± 5) nm thick nickel stripes into the electrochemically grown nanowires. An external magnetic field of 40-45 mT was used to orient the motors, which were acoustically propelled along their long axes. In the absence of a magnetic field, (300 ± 30) nm diameter, (4.3 ± 0.2) μm long nanowires with (40 ± 5) nm thick magnetic stripes exhibit the same self-acoustophoretic behavior, including pattern formation into concentric nanowire circles, aligned spinning chains, and autonomous axial motion, as their non-magnetic counterparts. In a magnetic field, these wires and their paths are oriented as evidenced by their relatively linear trajectories. Coordinated motion of multiple motors and targeting of individual motors toward HeLa cells with micrometer-level precision was demonstrated.

  13. Preparation and specific properties of single crystalline metallic nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Hassel, Achim Walter; Milenkovic, Srdjan [Max-Planck-Institut fuer Eisenforschung GmbH, Duesseldorf (Germany); Institute for Chemical Technology of Inorganic Materials, Johannes Kepler University, Linz (Austria); Bello-Rodriguez, Belen; Smith, Andrew Jonathan; Chen, Ying [Max-Planck-Institut fuer Eisenforschung GmbH, Duesseldorf (Germany)

    2010-10-15

    Directional solidification of eutectics is a route to produce iso-oriented metallic single crystalline nanowires (NWs). Etching or electrochemical oxidation allows selective dissolution of either of the phases to produce NW arrays, isolated NWs, nanopore arrays and also derived structures by combining various process steps. A good understanding of the thermodynamics and the kinetics of the phase transformation and chemical reactions including electrodissolution, passivation, selective etching, complexing of reaction products and electrodeposition in the systems NiAl-X (X=Re, W, Mo), Ag-Cu and Fe-Au was reached. Functional devices based on these NWs, like high aspect ratio NW based STM tips, nanoelectromechanical systems (NEMS), NW pH sensors and sensor arrays were constructed. Array of rhenium single crystalline NWs embedded in the NiAl matrix after partial dissolution of the matrix. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  14. Development of self-assembling nanowires containing electronically active oligothiophenes

    Science.gov (United States)

    Tsai, Wei-Wen

    This dissertation discusses the development of conductive one-dimensional nanowires from self-assembling oligothiophene molecules. Self-assembly has been demonstrated to be a promising alternative approach towards high performance, solution processable, and low-cost organic electronics. One of the many challenges in this field is the control of supramolecular morphologies of ordered structures containing pi-conjugated moieties. This research demonstrated several successful strategies to achieve self assembly of conductive nanowires using synergistic interactions combining pi stacking and hydrogen bonding. The first approach used was to develop a hairpin-shaped sexithiophene molecule, which features two arms of the conjugated structure. The diamidocyclohexyl headgroup of this molecule successfully directs the self-assembly from hydrogen bonding among the amides, forming high-aspect-ratio one-dimensional nanowires with well-defined diameters of 3.0 +/- 0.3 nm. The molecular orientation in the nanostructures promotes formation of sexithiophene H and J aggregates that facilitate efficient charge transport. Organic field-effect transistors were fabricated to reveal improved intrinsic hole mobility from films of the nanostructures, 3.46 x 10-6 cm2V-1s-1, which is one order of magnitude higher than films cast from unassembled molecules. Bulk heterojunction solar cells were developed from this molecule and fullerenes utilizing solution-phase fabrication methods. Intimate mix of the molecule and phenyl-C61-butyric acid methyl ester creates structured interfaces for efficient exciton splitting. The charge carrier mobilities of each material are improved by self-assembly in solution and thermal-energy assisted phase separation.The photovoltaic devices achieved the highest open-circuit voltage of 0.62 V, short-circuit current of 1.79 mA/cm2, fill factor of 35%, and power conversion efficiency of 0.48%. Another strategy to one-dimensional nanowires studied here involved the

  15. Plasmonic Waveguide-Integrated Nanowire Laser

    DEFF Research Database (Denmark)

    Bermudez-Urena, Esteban; Tutuncuoglu, Gozde; Cuerda, Javier

    2017-01-01

    Next-generation optoelectronic devices and photonic circuitry will have to incorporate on-chip compatible nanolaser sources. Semiconductor nanowire lasers have emerged as strong candidates for integrated systems with applications ranging from ultrasensitive sensing to data communication technolog...

  16. Optical properties of nanowire metamaterials with gain

    DEFF Research Database (Denmark)

    Isidio de Lima, Joaquim Junior; Adam, Jost; Rego, Davi

    2016-01-01

    The transmittance, reflectance and absorption of a nanowire metamaterial with optical gain are numerically simulated and investigated. It is assumed that the metamaterial is represented by aligned silver nanowires embedded into a semiconductor matrix, made of either silicon or gallium phosphide....... The gain in the matrix is modeled by adding a negative imaginary part to the dielectric function of the semiconductor. It is found that the optical coefficients of the metamaterial depend on the gain magnitude in a non-trivial way: they can both increase and decrease with gain depending on the lattice...... constant of the metamaterial. This peculiar behavior is explained by the field redistribution between the lossy metal nanowires and the amplifying matrix material. These findings are significant for a proper design of nanowire metamaterials with low optical losses for diverse applications....

  17. Oleylamine Assisted Synthesis of Ultralong Copper Nanowires

    Directory of Open Access Journals (Sweden)

    Tan Michael

    2015-01-01

    Full Text Available This paper reports the hydrothermal synthesis of smooth and ultralong copper nanowires (Cu NW prepared using oleylamine (OM, oleic acid (OA, and Cl- ion as coordinating and etching agents respectively. Cu nanowires with mean diameters around 82.3 nm and lengths exceeding 300 μm were synthesized using 2 % vol. OM and 1.8 mM OA at 120ºC after 12 h. The Cu NWs exhibit five-fold twinning and growth along the [110] direction. The morphological evolution of the products were also observed and discussed. Without Cl-, octahedral crystals instead of nanowires were formed. The addition of oleic acid as coordinating agent resulted to fewer particles and smoother nanowires which exhibit excellent mechanical stability. This method provides a simple, low-cost and high yield synthesis of Cu NWs for applications such as gas sensors and transparent conducting electrodes.

  18. Nonradiative Step Facets in Semiconductor Nanowires.

    Science.gov (United States)

    Sanchez, Ana M; Zhang, Yunyan; Tait, Edward W; Hine, Nicholas D M; Liu, Huiyun; Beanland, Richard

    2017-04-12

    One of the main advantages of nanowires for functional applications is their high perfection, which results from surface image forces that act on line defects such as dislocations, rendering them unstable and driving them out of the crystal. Here we show that there is a class of step facets that are stable in nanowires, with no long-range strain field or dislocation character. In zinc-blende semiconductors, they take the form of Σ3 (112) facets with heights constrained to be a multiple of three {111} monolayers. Density functional theory calculations show that they act as nonradiative recombination centers and have deleterious effects on nanowire properties. We present experimental observations of these defects on twin boundaries and twins that terminate inside GaAsP nanowires and find that they are indeed always multiples of three monolayers in height. Strategies to use the three-monolayer rule during growth to prevent their formation are discussed.

  19. Orienteering Club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Courses d’orientation Une bonne dizaine de clubs étaient représentés samedi dernier à La Faucille pour participer à la  2e manche de la coupe genevoise organisée par le club du CERN. Les 120 coureurs ont pu découvrir des parcours classés "technique". Ceux du Haut-Jura familiarisés à ce type de terrain ont pu sortir leur épingle du jeu et se sont octroyé la victoire sur 4 des 5 circuits. Samedi 21 septembre, la montagne du Haut-Jura était encore plébiscitée puisque les coureurs étaient attendus à Saint Cergue sur la carte des Pralies. Pour les résultats complets de La Faucille et les informations sur la prochaine étape, consultez le site du club http://cern.ch/club-orientation.

  20. Singularities in primate orientation maps.

    Science.gov (United States)

    Obermayer, K; Blasdel, G G

    1997-04-01

    We report the results of an analysis of orientation maps in primate striate cortex with focus on singularities and their distribution. Data were obtained from squirrel monkeys and macaque monkeys of different ages. We find the approximately 80% of singularities that are nearest neighbors have the opposite sign and that the spatial distribution of singularities differs significantly from a random distribution of points. We do not find evidence for consistent geometric patterns that singularities may form across the cortex. Except for a different overall alignment of orientation bands and different periods of repetition, maps obtained from different animals and different ages are found similar with respect to the measures used. Orientation maps are then compared with two different pattern models that are currently discussed in the literature: bandpass-filtered white noise, which accounts very well for the overall map structure, and the field analogy model, which specifies the orientation map by the location of singularities and their properties. The bandpass-filtered noise approach to orientation patterns correctly predicts the sign correlations between singularities and accounts for the deviations in the spatial distribution of singularities away from a random dot pattern. The field analogy model can account for the structure of certain local patches of the orientation map but not for the whole map. Neither of the models is completely satisfactory, and the structure of the orientation map remains to be fully explained.

  1. Orientation Club

    CERN Multimedia

    Club d'orientation

    2014-01-01

    COURSE ORIENTATION Résultats de samedi 10 mai    C’est sur une carte entièrement réactualisée dans les bois de Versoix, que plus de 100 coureurs sont venus participer à la course d’orientation, type longue distance, préparée par des membres du club du CERN. Le terrain plutôt plat nécessitait une orientation à grande vitesse, ce qui a donné les podiums suivants :  Technique long avec 17 postes : 1er Jurg Niggli, O’Jura en 52:48, 2e Beat Muller, COLJ Lausanne-Jorat en 58:02, 3e Christophe Vuitton, CO CERN en 58:19 Technique moyen avec 13 postes : 1er Jean-Bernard Zosso, CO CERN, en 46:05 ; 2e Yves Rousselot, Balise 25 Besançon, en 55:11 ; 3e Laurent Merat, O'Jura, en 55:13 Technique court avec 13 postes : 1er Julien Vuitton, CO CERN en 40:59, 2e Marc Baumgartner, CO CERN en 43:18, 3e Yaelle Mathieu en 51:42 Su...

  2. Orienteering Club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Courses d’orientation ce printemps Le Club d’orientation du CERN vous invite à venir découvrir la course d’orientation et vous propose, en partenariat avec d’autres clubs de la région, une dizaine de courses populaires. Celles-ci ont lieu les samedis après-midi, elles sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé, en famille ou en individuel, en promenade ou en course. Si vous êtes débutant vous pouvez profiter d’une petite initiation offerte par l’organisateur avant de vous lancer sur un parcours. Divers types de parcours sont à votre choix lors de chaque épreuve : facile court (2-3 km), facile moyen (3-5 km), technique court (3-4 km), technique moyen (4-5 km) et technique long (5-7 km). Les dates à retenir sont les suivantes : Samedi 23 mars: Pully (Vd) Samedi 13 avril: Pougny...

  3. Nanoscale contact engineering for Silicon/Silicide nanowire devices

    Science.gov (United States)

    Lin, Yung-Chen

    attributed to the high compressive stress built-in in the core/shell NW structure that retards the diffusion of the nickel atom as well as limits the volume expansion of the metal-rich phases. As a result, the high stress at this finite scale hinders the continuous growth of Ni31Si 12 into the core/shell NWs and totally eliminates the formation of Ni 2Si in core/shell NWs with thick oxide shells (˜ 50 nm). Through these studies, we have demonstrated first time the phase formation sequences of nickel silicides in Si and Si/SiOx NW structures, which is of great importance for reliable contact engineering for Si NW devices. Furthermore, we have provided a clear picture of the hindered nickel silicide growth in confined nanoscale environment and showed the deviated behavior of silicides growth under stress. The information rendered here will be useful for Si NW device applications as well as for the silicon device engineering at nanoscale in general. To further investigate the oxide shell effect, Mn5Si 3 and Fe5Ge3 NW were grown within various oxide thickness to explore the nucleation and growth in the nanowire structure. A oxide shell exerted a compressive stress on the silicide or germanide materials will make those materials with single-crystal properties. Interestingly, single-crystal growth of contact materials can be also implemented for germanide materials. The iron-rich germanide, Fe5Ge3, was successfully grown with single-crystal properties. It shows ferromagnetic properties with a Curie temperature above the room temperature verified by magnetic force microscope (MFM). Two different epitaxial relations found at germanide/germanium interface due to the different sizes of the germanium NW templates. These two different crystal structures exhibited magnetic anisotropy in magnetic force microscope (MFM) measurement, showing differently preferred domain orientations. In-plane and out-of-plane magnetization in the Fe5Ge3 NWs are observed in our experiment. The crystal

  4. High-performance single nanowire tunnel diodes.

    Science.gov (United States)

    Wallentin, Jesper; Persson, Johan M; Wagner, Jakob B; Samuelson, Lars; Deppert, Knut; Borgström, Magnus T

    2010-03-10

    We demonstrate single nanowire tunnel diodes with room temperature peak current densities of up to 329 A/cm(2). Despite the large surface to volume ratio of the type-II InP-GaAs axial heterostructure nanowires, we measure peak to valley current ratios (PVCR) of up to 8.2 at room temperature and 27.6 at liquid helium temperature. These sub-100-nm-diameter structures are promising components for solar cells as well as electronic applications.

  5. Step-flow kinetics in nanowire growth.

    Science.gov (United States)

    Wen, C-Y; Tersoff, J; Reuter, M C; Stach, E A; Ross, F M

    2010-11-05

    Nanowire growth occurs by step flow at the wire-catalyst interface, with strikingly different step-flow kinetics for solid versus liquid catalysts. Here we report quantitative in situ measurements of step flow together with a kinetic model that reproduces the behavior. This allows us to identify the key parameters controlling step-flow growth, evaluate changes in the catalyst composition during growth, and identify the most favorable conditions for growing abrupt heterojunctions in nanowires.

  6. Plasmon resonant cavities in vertical nanowire arrays

    Energy Technology Data Exchange (ETDEWEB)

    Bora, M; Bond, T; Behymer, E; Chang, A

    2010-02-23

    We investigate tunable plasmon resonant cavity arrays in paired parallel nanowire waveguides. Resonances are observed when the waveguide length is an odd multiple of quarter plasmon wavelengths, consistent with boundary conditions of node and antinode at the ends. Two nanowire waveguides satisfy the dispersion relation of a planar metal-dielectric-metal waveguide of equivalent width equal to the square field average weighted gap. Confinement factors over 103 are possible due to plasmon focusing in the inter-wire space.

  7. Soft and Hard Tissue Changes around Tissue-Oriented Tulip-Design Implant Abutments: A 1-Year Randomized Prospective Clinical Trial.

    Science.gov (United States)

    Gutmacher, Zvi; Levi, Guy; Blumenfeld, Israel; Machtei, Eli E

    2015-10-01

    The advantages of platform switching using narrower abutments remain controversial. Many researchers suggest that platform switching can yield enhanced clinical results, while others remain skeptical. We hypothesize that the effectiveness of platform switching might be associated with the degree of reduction in size of the abutment. To radiographically and clinically examine a new abutment design created to move the implant-abutment interface farther medially. This was a prospective, randomized controlled clinical trial that included 27 patients (41 MIS Lance Plus® implants; MIS Implant Technologies, Karmiel, Israel). The patients' age ranged from 39 to 75 years. At the second stage of the surgery, the implants were randomly assigned to either the new platform switch Tulip abutment (TA) design or to the standard platform abutment (SA). Implant probing depth (IPD) and bleeding on probing (BOP) were recorded at baseline and after 12 months. Standardized periapical radiographs were taken (at baseline and at 12 months) and the marginal bone height measured. All implants were successfully integrated. The mean IPD at 1 year post-op was 2.91 mm for the SA group and 2.69 mm for the TA group (p > .05). Similarly, the BOP at 1 year was almost identical in both groups. The mean values of bone resorption at baseline were 0.98 ± 0.37 mm and 0.69 ± 0.20 for the TA and SA groups, respectively (p > .05). Bone loss (baseline to 12 months) was significantly greater in the SA group compared with the TA group. Use of the new TA, with its significantly downsized diameter, resulted in reduced bone loss at 1 year. Further research will be required to assess the long-term effect of this abutment on peri-implant health. © 2014 Wiley Periodicals, Inc.

  8. Weak antilocalization effect of topological crystalline insulator Pb(1-x)Sn(x)Te nanowires with tunable composition and distinct {100} facets.

    Science.gov (United States)

    Safdar, Muhammad; Wang, Qisheng; Wang, Zhenxing; Zhan, Xueying; Xu, Kai; Wang, Fengmei; Mirza, Misbah; He, Jun

    2015-04-08

    Pb(1-x)Sn(x)Te is a unique topological crystalline insulator (TCI) that undergoes a topological phase transition from topological trivial insulator to TCI with the change of Sn content and temperature. Meanwhile, the surface states properties of Pb(1-x)Sn(x)Te are strongly dependent on crystallographic plane orientation. In this work, we first reported controllable synthesis of rectangular prismatic Pb(x)Sn(1-x)Te nanowires by vapor deposition method. Rectangular prismatic Pb(x)Sn(1-x)Te nanowires exhibits distinct {100} surfaces. Furthermore, The Sn composition of Pb(1-x)Sn(x)Te nanowires can be continuously controlled from 0 to 1. Low temperature magnetotransport shows that PbTe nanowire exhibits weak localization (WL) effect, whereas Pb0.5Sn0.5Te and Pb0.2Sn0.8Te nanowires display pronounced weak antilocalization (WAL) effect. This transition is explained by the topological phase transform of Pb(1-x)Sn(x)Te from trivial to nontrivial insulator with Sn content (x) exceeding 0.38. Pb(x)Sn(1-x)Te nanowires synthesized in this work lay a foundation for probing spin-correlated electron transport and show great potentials for future applications of tunable spintronic devices.

  9. Magnetization reversal studies in structurally tailored cobalt nanowires

    Science.gov (United States)

    Kaur, Daljit; Chaudhary, Sujeet; Pandya, Dinesh K.; Gupta, Rekha; Kotnala, R. K.

    2013-10-01

    Cobalt nanowires (NWs) having hcp crystal structure are structurally tailored for different preferred orientations (PO) of (0002), (101¯0), (112¯0) and (101¯1) by varying bath temperature and bath concentration in commercially available 50 nm pore diameter polycarbonate (PCT) and 20 nm pore diameter anodic alumina (AAO) membranes. The magnetization studies show orientation dependent competition of magneto-crystalline anisotropy with shape anisotropy. The large effective anisotropy, Keff (along longitudinal direction) of 1.42×106 erg/cc is observed in (0002) PO NWs, which changes sign (-1.50×106 erg/cc) in (101¯0) PO NWs. The angular dependence of coercivity [HC(θ)] in (0002) oriented Co NWs exhibits a non-monotonic behavior in both the 50 nm and 20 nm samples. The fitting of HC(θ) data reveals that the magnetization reversal mechanism initially takes place by curling and subsequently changes to coherent rotation mode after a certain transition angle, which is higher in case of denser NW array. This increase in transition angle can be attributed to the increased magneto-static interactions in the AAO membrane array having 103 times higher NW areal-density than that in PCT membrane array. Role of dipolar/ magnetostatic anisotropy studied by varying NW areal-density and NW diameter.

  10. Axial InGaAs/GaAs nanowire separate absorption-multiplication avalanche photodetectors (Conference Presentation)

    Science.gov (United States)

    Huffaker, Diana L.

    2017-05-01

    In0.53Ga0.47As/InP single photon avalanche detectors (SPADs) have a high photon detection efficiency in the near-IR, however the dark count rate is prohibitively high at room temperature. A nanowire-based In0.3Ga0.7As/GaAs SPAD can significantly reduce the DCR through a nearly three order of magnitude reduction in bulk InGaAs volume, as well as by reducing the indium composition for operation at 1064 nm. As a first step, we have successfully grown axial InGaAs/GaAs heterostructures using catalyst-free selective-area epitaxy. We will present the electrical characterization of a vertically oriented nanowire array InGaAs/GaAs SPADs operating at 1064 nm and use 3-dimensional modeling to aid in the analysis.

  11. Displacement field of a screw dislocation in a Cu nanowire: An atomistic study

    Science.gov (United States)

    Gailhanou, Marc; Roussel, Jean-Marc

    2013-12-01

    By performing atomistic calculations with a tight-binding potential, we study the displacement field induced by a screw dislocation lying along a free Cu cylindrical nanowire. For this anisotropic orientation that is often encountered experimentally, we show that the displacement field uz along the nanowire can be seen as the superposition of three different fields: the screw dislocation field in an infinite medium, the warping displacement field caused by the so-called Eshelby twist, and an additional image field induced by the free surfaces. A Fourier series analysis of this latter image displacement and stress fields is given. For a circular cross section of the wire, this image field corresponds mainly to an additional warping displacement uz∝xy. The dissociation mechanism of the dislocation into partials and the surface stress effects being also captured in our simulations, the present study enables one to quantify the various contributions to the formation of the x-ray diffractograms.

  12. Super-resolution imaging of light-matter interactions near single semiconductor nanowires

    Science.gov (United States)

    Johlin, Eric; Solari, Jacopo; Mann, Sander A.; Wang, Jia; Shimizu, Thomas S.; Garnett, Erik C.

    2016-12-01

    Nanophotonics is becoming invaluable for an expanding range of applications, from controlling the spontaneous emission rate and the directionality of quantum emitters, to reducing material requirements of solar cells by an order of magnitude. These effects are highly dependent on the near field of the nanostructure, which constitutes the evanescent fields from propagating and resonant localized modes. Although the interactions between quantum emitters and nanophotonic structures are increasingly well understood theoretically, directly imaging these interactions experimentally remains challenging. Here we demonstrate a photoactivated localization microscopy-based technique to image emitter-nanostructure interactions. For a 75 nm diameter silicon nanowire, we directly observe a confluence of emission rate enhancement, directivity modification and guided mode excitation, with strong interaction at scales up to 13 times the nanowire diameter. Furthermore, through analytical modelling we distinguish the relative contribution of these effects, as well as their dependence on emitter orientation.

  13. Fabrication of gallium nitride nanowires by metal-assisted photochemical etching

    Science.gov (United States)

    Zhang, Miao-Rong; Jiang, Qing-Mei; Zhang, Shao-Hui; Wang, Zu-Gang; Hou, Fei; Pan, Ge-Bo

    2017-11-01

    Gallium nitride (GaN) nanowires (NWs) were fabricated by metal-assisted photochemical etching (MaPEtch). Gold nanoparticles (AuNPs) as metal catalyst were electrodeposited on the GaN substrate. SEM and HRTEM images show the surface of GaN NWs is smooth and clean without any impurity. SAED and FFT patterns demonstrate GaN NWs have single crystal structure, and the crystallographic orientation of GaN NWs is (0002) face. On the basis of the assumption of localized galvanic cells, combined with the energy levels and electrochemical potentials of reactants in this etching system, the generation, transfer and consumption of electron-hole pairs reveal the whole MaPEtch reaction process. Such easily fabricated GaN NWs have great potential for the assembly of GaN-based single-nanowire nanodevices.

  14. Comparison between ZnO nanowires grown by chemical vapor deposition and hydrothermal synthesis

    Science.gov (United States)

    Podrezova, L. V.; Porro, S.; Cauda, V.; Fontana, M.; Cicero, G.

    2013-11-01

    Vertically aligned zinc oxide nanowires (NWs) were synthesized by two different techniques: chemical vapor deposition (CVD) and hydrothermal synthesis. To compare the effects of different growth conditions, both F-doped SnO2 (FTO) coated-glass and silicon wafers were used as substrates. Before NWs growth, all the substrates were covered with a ZnO seed layer film obtained with the same procedure, which acts as nucleation site for the subsequent growth of the nanowires both during CVD and hydrothermal synthesis. We studied the influence of the two synthesis techniques and the growth duration on the final morphology, orientation, and density of the ZnO NWs using electron microscopy and X-ray diffraction, while the NWs optical quality was addressed by UV-Vis spectroscopy. By discussing advantages and disadvantages of both synthesis methods, we finally show that the application purpose often drives the choice of the NWs growth process and the substrate to be used.

  15. Nanowire assembly, e.g. for optical probes, comprises optically trapping high aspect ratio semiconductor nanowire with infrared single-beam optical trap and attaching nanowire to organic or inorganic structure

    OpenAIRE

    Pauzauskie, P.; Radenovic, A.; Trepagnier, E.; Liphardt, J.; Yang, P.

    2007-01-01

    NOVELTY - A nanowire assembly method comprises optically trapping a semiconductor nanowire with an infrared single-beam optical trap and attaching the nanowire to an organic or inorganic structure by laser fusing. The nanowire is further trapped in a fluid environment. The optical trap has a beam wavelength of 1064 nm. The nanowire has an aspect ratio greater than 100 and a diameter less than 100 (preferably less than 80) nm. The nanowire and the organic or inorganic structure form a heterost...

  16. Protein immobilization onto electrochemically synthesized CoFe nanowires

    National Research Council Canada - National Science Library

    Torati, Sri Ramulu; Reddy, Venu; Yoon, Seok Soo; Kim, CheolGi

    2015-01-01

    CoFe nanowires have been synthesized by the electrodeposition technique into the pores of a polycarbonate membrane with a nominal pore diameter of 50 nm, and the composition of CoFe nanowires varying...

  17. Memristive properties of hexagonal WO3 nanowires induced by oxygen vacancy migration

    Science.gov (United States)

    2013-01-01

    Tungsten trioxide (WO3) is always oxygen-deficient or non-stoichiometric under atmospheric conditions. Positively charged oxygen vacancies prefer to drift as well as electrons when the electric field is strong enough, which will alter the distribution of oxygen vacancies and then endow WO3 with memristive properties. In Au/WO3 nanowire/Au sandwich structures with two ohmic contacts, the axial distribution of oxygen vacancies and then the electrical transport properties can be more easily modulated by bias voltage. The threshold electric field for oxygen vacancy drifting in single-crystal hexagonal WO3 nanowire is about 106 V/m, one order of magnitude less than that in its granular film. At elevated temperatures, the oxygen vacancy drifts and then the memristive effect can be enhanced remarkably. When the two metallic contacts are asymmetric, the WO3 nanowire devices even demonstrate good rectifying characteristic at elevated temperatures. Based on the drift of oxygen vacancies, nanoelectronic devices such as memristor, rectifier, and two-terminal resistive random access memory can be fabricated on individual WO3 nanowires. PMID:23347429

  18. Enhancing ionic conductivity in composite polymer electrolytes with well-aligned ceramic nanowires

    Science.gov (United States)

    Liu, Wei; Lee, Seok Woo; Lin, Dingchang; Shi, Feifei; Wang, Shuang; Sendek, Austin D.; Cui, Yi

    2017-04-01

    In contrast to conventional organic liquid electrolytes that have leakage, flammability and chemical stability issues, solid electrolytes are widely considered as a promising candidate for the development of next-generation safe lithium-ion batteries. In solid polymer electrolytes that contain polymers and lithium salts, inorganic nanoparticles are often used as fillers to improve electrochemical performance, structure stability, and mechanical strength. However, such composite polymer electrolytes generally have low ionic conductivity. Here we report that a composite polymer electrolyte with well-aligned inorganic Li+-conductive nanowires exhibits an ionic conductivity of 6.05 × 10-5 S cm-1 at 30 ∘C, which is one order of magnitude higher than previous polymer electrolytes with randomly aligned nanowires. The large conductivity enhancement is ascribed to a fast ion-conducting pathway without crossing junctions on the surfaces of the aligned nanowires. Moreover, the long-term structural stability of the polymer electrolyte is also improved by the use of nanowires.

  19. Crystallographic Mapping of Guided Nanowires by Second Harmonic Generation Polarimetry.

    Science.gov (United States)

    Neeman, Lior; Ben-Zvi, Regev; Rechav, Katya; Popovitz-Biro, Ronit; Oron, Dan; Joselevich, Ernesto

    2017-02-08

    The growth of horizontal nanowires (NWs) guided by epitaxial and graphoepitaxial relations with the substrate is becoming increasingly attractive owing to the possibility of controlling their position, direction, and crystallographic orientation. In guided NWs, as opposed to the extensively characterized vertically grown NWs, there is an increasing need for understanding the relation between structure and properties, specifically the role of the epitaxial relation with the substrate. Furthermore, the uniformity of crystallographic orientation along guided NWs and over the substrate has yet to be checked. Here we perform highly sensitive second harmonic generation (SHG) polarimetry of polar and nonpolar guided ZnO NWs grown on R-plane and M-plane sapphire. We optically map large areas on the substrate in a nondestructive way and find that the crystallographic orientations of the guided NWs are highly selective and specific for each growth direction with respect to the substrate lattice. In addition, we perform SHG polarimetry along individual NWs and find that the crystallographic orientation is preserved along the NW in both polar and nonpolar NWs. While polar NWs show highly uniform SHG along their axis, nonpolar NWs show a significant change in the local nonlinear susceptibility along a few micrometers, reflected in a reduction of 40% in the ratio of the SHG along different crystal axes. We suggest that these differences may be related to strain accumulation along the nonpolar wires. We find SHG polarimetry to be a powerful tool to study both selectivity and uniformity of crystallographic orientations of guided NWs with different epitaxial relations.

  20. Zero-bias photocurrents in highly-disordered networks of Ge and Si nanowires

    OpenAIRE

    Rabbani, M. Golam; Patil, Sunil R.; Verma, Amit; Villarreal, Julian E.; Korgel, Brian A.; Nekovei, Reza; Khader, Mahmoud M.; Darling, R. B.; Anantram, M. P.

    2017-01-01

    Semiconducting nanowire (NW) devices have garnered attention in self-powered electronic and optoelectronic applications. This work explores and exhibits, for the first time for visible light, a clear evidence of the zero-biased optoelectronic switching in randomly dispersed Ge and Si NW networks. The test bench, on which the NWs were dispersed for optoelectronic characterization, was fabricated using standard CMOS fabrication process, and utilized metal contacts with dissimilar work functions...

  1. All oxide ultraviolet photodetectors based on a p-Cu{sub 2}O film/n-ZnO heterostructure nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Ok, Yul Ho; Lee, Ki Ryong; Jung, Byung Oh; Kwon, Yong Hun; Cho, Hyung Koun, E-mail: chohk@skku.edu

    2014-11-03

    All-oxide ultraviolet (UV) photodetectors based on a p-Cu{sub 2}O thin film and n-ZnO nanowires were fabricated on Corning glass substrates. The p-Cu{sub 2}O film was fabricated by a sol–gel method and two-step thermal treatment on the ZnO nanowire arrays grown on ZnO doped with 5 at.% Al bottom electrode/glass for the formation of a p–n diode. The sol–gel coating of a Cu{sub 2}O layer produced the thin p-Cu{sub 2}O film with good uniformity on the ZnO nanowires and polycrystals with the (111) preferred orientation. It resulted in continuous interconnection of the ZnO nanowire arrays despite the solution process. The current–voltage (I–V) characteristics of the fabricated p–n heterostructure showed a typical rectifying behavior with a current rise at about 2 V and an I (illumination)/I (dark) ratio of about 3.89 × 10{sup 2} at − 6 V. The p-Cu{sub 2}O/n-ZnO nanowire-based UV photodetectors show the responsivity of ∼ 50 A/W with a peak position at 360 nm in reverse bias, together with weak photoresponse in the visible region. Consequently, we found that the introduction of the p-type Cu{sub 2}O layer in the ZnO nanowire-based UV photodetectors provided effective all-oxide p–n junctions without degrading UV/visible selectivity. - Highlights: • P-type Cu{sub 2}O films were deposited by a sol–gel method on the ZnO nanowires. • The p-Cu{sub 2}O/n-ZnO nanowire structure was fabricated for ultraviolet sensors. • Cu{sub 2}O films were optimized by spin coating speed and mole concentration. • Continuous Cu{sub 2}O films were produced as a hole injection or transport layer. • Cu{sub 2}O/ZnO nanowire photodetectors showed improved sensing performance.

  2. Long-range magnetostatic interactions in arrays of nanowires

    CERN Document Server

    Raposo, V; González, J M; Vázquez, M

    2000-01-01

    Experimental measurements and micromagnetic simulations of the hysteresis loops of arrays of cobalt nanowires are compared here. Arrays of cobalt nanowires (200 nm in diameter) were electrodeposited into the pores of alumina membranes (thickness 60 mu m). Their hysteresis loops along the axial direction of nanowires were measured using vibrating sample magnetometry. Micromagnetic simulations were performed considering dipolar interaction between nanowires leading to similar hysteresis loops as those obtained experimentally.

  3. Manganese oxide nanowires, films, and membranes and methods of making

    Science.gov (United States)

    Suib, Steven Lawrence [Storrs, CT; Yuan, Jikang [Storrs, CT

    2011-02-15

    Nanowires, films, and membranes comprising ordered porous manganese oxide-based octahedral molecular sieves and methods of making the same are disclosed. A method for forming nanowires includes hydrothermally treating a chemical precursor composition in a hydrothermal treating solvent to form the nanowires, wherein the chemical precursor composition comprises a source of manganese cations and a source of counter cations, and wherein the nanowires comprise ordered porous manganese oxide-based octahedral molecular sieves.

  4. Vertical nanowire probes for intracellular signaling of living cells

    OpenAIRE

    Lee, Ki-Young; Kim, Ilsoo; Kim, So-Eun; Jeong, Du-Won; Kim, Ju-Jin; Rhim, Hyewhon; Ahn, Jae-Pyeong; Park, Seung-Han; Choi, Heon-Jin

    2014-01-01

    The single living cell action potential was measured in an intracellular mode by using a vertical nanoelectrode. For intracellular interfacing, Si nanowires were vertically grown in a controlled manner, and optimum conditions, such as diameter, length, and nanowire density, were determined by culturing cells on the nanowires. Vertical nanowire probes were then fabricated with a complimentary metal-oxide-semiconductor (CMOS) process including sequential deposition of the passivation and electr...

  5. Magnetization reversal studies in structurally tailored cobalt nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Kaur, Daljit; Chaudhary, Sujeet [Thin Film Laboratory, Department of Physics, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016 (India); Pandya, Dinesh K., E-mail: dkpandya@physics.iitd.ac.in [Thin Film Laboratory, Department of Physics, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110016 (India); Gupta, Rekha; Kotnala, R.K. [National Physical Laboratory, K. S. Krishnan Marg, New Delhi 110012 (India)

    2013-10-15

    Cobalt nanowires (NWs) having hcp crystal structure are structurally tailored for different preferred orientations (PO) of (0002), (101{sup ¯}0), (112{sup ¯}0) and (101{sup ¯}1) by varying bath temperature and bath concentration in commercially available 50 nm pore diameter polycarbonate (PCT) and 20 nm pore diameter anodic alumina (AAO) membranes. The magnetization studies show orientation dependent competition of magneto-crystalline anisotropy with shape anisotropy. The large effective anisotropy, K{sub eff} (along longitudinal direction) of 1.42×10{sup 6} erg/cc is observed in (0002) PO NWs, which changes sign (−1.50×10{sup 6} erg/cc) in (101{sup ¯}0) PO NWs. The angular dependence of coercivity [H{sub C}(θ)] in (0002) oriented Co NWs exhibits a non-monotonic behavior in both the 50 nm and 20 nm samples. The fitting of H{sub C}(θ) data reveals that the magnetization reversal mechanism initially takes place by curling and subsequently changes to coherent rotation mode after a certain transition angle, which is higher in case of denser NW array. This increase in transition angle can be attributed to the increased magneto-static interactions in the AAO membrane array having 10{sup 3} times higher NW areal-density than that in PCT membrane array. - Highlights: • Magnetization reversal in cobalt nanowires of (0002), (101{sup ¯}1), (101{sup ¯}0) preferred orientations. • Curling and coherent switching of magnetization due to varying competition of anisotropies. • H{sub C}(θ) data fitting reveals domination of curling at lower and coherent rotation at higher θ. • H{sub C}(θ) in (0002) Co NWs exhibits transition angle θ{sub T} for change from curling to coherent rotation. • θ{sub T} is 15° higher in NW arrays of 1000 times higher areal-density due to magnetostatic anisotropy. • Role of dipolar/ magnetostatic anisotropy studied by varying NW areal-density and NW diameter.

  6. Nanowires: properties, applications and synthesis via porous anodic ...

    Indian Academy of Sciences (India)

    Quasi one-dimensional nanowires possess unique electrical, electronic, thermoelectrical, optical, magnetic and chemical properties, which are different from that of their parent counterpart. The physical properties of nanowires are influenced by the morphology of the nanowires, diameter dependent band gap, carrier ...

  7. Failure mechanisms and electromechanical coupling in semiconducting nanowires

    Directory of Open Access Journals (Sweden)

    Peng B.

    2010-06-01

    Full Text Available One dimensional nanostructures, like nanowires and nanotubes, are increasingly being researched for the development of next generation devices like logic gates, transistors, and solar cells. In particular, semiconducting nanowires with a nonsymmetric wurtzitic crystal structure, such as zinc oxide (ZnO and gallium nitride (GaN, have drawn immense research interests due to their electromechanical coupling. The designing of the future nanowire-based devices requires component-level characterization of individual nanowires. In this paper, we present a unique experimental set-up to characterize the mechanical and electromechanical behaviour of individual nanowires. Using this set-up and complementary atomistic simulations, mechanical properties of ZnO nanowires and electromechanical properties of GaN nanowires were investigated. In ZnO nanowires, elastic modulus was found to depend on nanowire diameter decreasing from 190 GPa to 140 GPa as the wire diameter increased from 5 nm to 80 nm. Inconsistent failure mechanisms were observed in ZnO nanowires. Experiments revealed a brittle fracture, whereas simulations using a pairwise potential predicted a phase transformation prior to failure. This inconsistency is addressed in detail from an experimental as well as computational perspective. Lastly, in addition to mechanical properties, preliminary results on the electromechanical properties of gallium nitride nanowires are also reported. Initial investigations reveal that the piezoresistive and piezoelectric behaviour of nanowires is different from bulk gallium nitride.

  8. Theory of surface second-harmonic generation in silica nanowires

    DEFF Research Database (Denmark)

    Lægsgaard, Jesper

    2010-01-01

    -based nanowires is critically discussed, based on simulations of second-harmonic generation in nanowires with a fluctuating phase-matching wavelength. It is concluded that efficient wavelength conversion will require strong improvements in the nanowire uniformity, peak powers well in excess of 10 KW, increase...

  9. Understanding quantum confinement in nanowires: basics, applications and possible laws.

    Science.gov (United States)

    Mohammad, S Noor

    2014-10-22

    A comprehensive investigation of quantum confinement in nanowires has been carried out. Though applied to silicon nanowires (SiNWs), it is general and applicable to all nanowires. Fundamentals and applications of quantum confinement in nanowires and possible laws obeyed by these nanowires, have been investigated. These laws may serve as backbones of nanowire science and technology. The relationship between energy band gap and nanowire diameter has been studied. This relationship appears to be universal. A thorough review indicates that the first principles results for quantum confinement vary widely. The possible cause of this variation has been examined. Surface passivation and surface reconstruction of nanowires have been elucidated. It has been found that quantum confinement owes its origin to surface strain resulting from surface passivation and surface reconstruction and hence thin nanowires may actually be crystalline-core/amorphous-shell (c-Si/a-Si) nanowires. Experimental data available in the literature corroborate with the suggestion. The study also reveals an intrinsic relationship between quantum confinement and the surface amorphicity of nanowires. It demonstrates that surface amorphicity may be an important tool to investigate the electronic, optoelectronic and sensorial properties of quantum-confined nanowires.

  10. Controlled growth of single nanowires within a supported alumina template

    DEFF Research Database (Denmark)

    Vlad, A.; Mátéfi-Tempfli, M.; Faniel, S.

    2006-01-01

    A simple technique for fabricating single nanowires with well-defined position is presented. The process implies the use of a silicon nitride mask for selective electrochemical growth of the nanowires in a porous alumina template. We show that this method allows the realization of complex nanowire...

  11. Measurement of light diffusion in ZnO nanowire forests

    NARCIS (Netherlands)

    Versteegh, M.A.M.; van der Wel, R.E.C.; Dijkhuis, J.I.

    2012-01-01

    Optimum design of efficient nanowire solar cells requires better understanding of light diffusion in a nanowire array. Here we demonstrate that our recently developed ultrafast all-optical shutter can be used to directly measure the dwell time of light in a nanowire array. Our measurements on

  12. Microbial nanowires and methods of making and using

    Energy Technology Data Exchange (ETDEWEB)

    Reguera, Gemma; Cologgi, Dena; Worden, Robert Mark; Castro-Forero, Angelines A.; Steidl, Rebecca

    2017-03-21

    Electrically conductive nanowires, and genetically or chemically modified production and use of such nanowires with altered conductive, adhesive, coupling or other properties are described. The disclosed nanowires are used as device or device components or may be adapted for soluble metal remediation.

  13. Topological Insulator Nanowires and Nanoribbons

    Energy Technology Data Exchange (ETDEWEB)

    Kong, D.S.

    2010-06-02

    Recent theoretical calculations and photoemission spectroscopy measurements on the bulk Bi{sub 2}Se{sub 3} material show that it is a three-dimensional topological insulator possessing conductive surface states with nondegenerate spins, attractive for dissipationless electronics and spintronics applications. Nanoscale topological insulator materials have a large surface-to-volume ratio that can manifest the conductive surface states and are promising candidates for devices. Here we report the synthesis and characterization of high quality single crystalline Bi{sub 2}Se{sub 3} nanomaterials with a variety of morphologies. The synthesis of Bi{sub 2}Se{sub 3} nanowires and nanoribbons employs Au-catalyzed vapor-liquid-solid (VLS) mechanism. Nanowires, which exhibit rough surfaces, are formed by stacking nanoplatelets along the axial direction of the wires. Nanoribbons are grown along [11-20] direction with a rectangular crosssection and have diverse morphologies, including quasi-one-dimensional, sheetlike, zigzag and sawtooth shapes. Scanning tunneling microscopy (STM) studies on nanoribbons show atomically smooth surfaces with {approx}1 nm step edges, indicating single Se-Bi-Se-Bi-Se quintuple layers. STM measurements reveal a honeycomb atomic lattice, suggesting that the STM tip couples not only to the top Se atomic layer, but also to the Bi atomic layer underneath, which opens up the possibility to investigate the contribution of different atomic orbitals to the topological surface states. Transport measurements of a single nanoribbon device (four terminal resistance and Hall resistance) show great promise for nanoribbons as candidates to study topological surface states.

  14. Orienteering Club

    CERN Multimedia

    Le Club d’orientation du CERN

    2017-01-01

    Calendrier des courses de la Coupe Genevoise – printemps 2017 Club d'orientation - Julien,  jeune membre du club. Le Club d’orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose une série de courses populaires, qui se dérouleront des deux côtés de la frontière franco-suisse, à savoir : Samedi 1 avril : Pougny/Challex (01) Samedi 8 avril: Ballens (VD) Samedi 22 avril: Apples (VD) Samedi 29 avril: Mont Mussy (01) Samedi 6 mai: Prémanon (39) Samedi 13 mai: Mont Mourex (01) Samedi 20 mai: Prévondavaux (VD) Samedi 10 juin: Chancy/Valleiry (74) Samedi 17 juin: Trélex - Finale (VD) Ces courses sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé, en famille ou en individuel. Les inscriptions sur un des 5 parcours proposés se font sur place le jour de l...

  15. COURSE ORIENTATION

    CERN Multimedia

    Club d'orientation du CERN

    2015-01-01

      Les coureurs d’orientation de la région se sont donné rendez-vous samedi dernier dans les bois de Pougny/Challex lors de l’épreuve organisée par le club d’orientation du CERN. La carte proposée pour les 5 circuits offrait aussi bien un coté très technique avec un relief pentu qu’un coté avec de grandes zones plates à forêt claire. Le parcours technique long comportant 20 postes a été remporté par Beat Muller du COLJ Lausanne en 56:26 devançant Denis Komarov, CO CERN en 57:30 et Yvan Balliot, ASO Annecy en 57:46. Pour les autres circuits les résultats sont les suivants: Technique moyen (13 postes): 1er Joël Mathieu en 52:32 à une seconde du 2e Vladimir Kuznetsov, COLJ Lausanne-Jorat, 3e Jean-Bernard Zosso, CO CERN, en 54:01 Technique court (12 postes): 1er Lennart Jirden, ...

  16. Orienteering Club

    CERN Multimedia

    Club d'orientation

    2010-01-01

    COURSE D’ORIENTATION La finale de la coupe de printemps Après avoir remporté le challenge club, samedi 29 juin lors du relais inter-club à Lausanne, le Club d’orientation du CERN organisait la dernière étape de la coupe genevoise de printemps samedi 5 juin à Saint-Cergue dans les bois de Monteret (Canton de Vaud). Plus de 100 participants se sont déplacés pour venir participer à la finale et découvrir une toute nouvelle carte dans une forêt vallonnée. Les résultats pour chaque circuit de cette étape sont : Technique long : 1. Jurg Niggli du club O’Jura, 2. Clément Poncet, 3. Oystein Midttun. Technique moyen : 1. Zoltan Trocsanyi CO CERN, 2. Christophe Ingold, 3. Christina Falga. Technique court : 1. Pierre-Andre Baum, CARE Vevey, 2. Emese Szunyog, 3. Solène Balay. Facile moyen : 1. Elisa P...

  17. Orienteering Club

    CERN Multimedia

    Le Club d’orientation du CERN

    2017-01-01

    COURSE ORIENTATION Finale de la coupe d’automne Le club d’orientation du CERN (COC Genève) a organisé sa dernière course populaire de la saison samedi 4 novembre au lieu-dit Les Terrasses de Genève (74). Cette 9e épreuve qui se courait sous la forme d’un One-Man-Relay, clôturait ainsi la coupe genevoise d’automne dont les lauréats sont : Circuit technique long : 1. Julien Vuitton (COC Genève), 2. Berni Wehrle (COC Genève), 3. Christophe Vuitton (COC Genève). Circuit technique moyen : 1. Vladimir Kuznetsov (Lausanne-Jorat), 2. J.-Bernard Zosso (COC Genève), 3. Laurent Merat (O’Jura). Circuit technique court : 1. Thibault Rouiller (COC Genève), 2. exæquo Lennart Jirden (COC Genève) et Katya Kuznetsova (Lausanne-Jorat). Circuit facile moyen : 1. Tituan Barge ...

  18. Orienteering Club

    CERN Multimedia

    Le Club d’orientation du CERN

    2017-01-01

    COURSE ORIENTATION Finale de la coupe d’automne Le club d’orientation du CERN (COC Genève) a organisé sa dernière course populaire de la saison samedi 4 novembre au lieu-dit Les Terrasses de Genève (74). Cette 9e épreuve qui se courait sous la forme d’un One-Man-Relay, clôturait ainsi la coupe genevoise d’automne dont les lauréats sont : Circuit technique long : 1. Julien Vuitton (COC Genève), 2. Berni Wehrle (COC Genève), 3. Christophe Vuitton (COC Genève). Circuit technique moyen : 1. Vladimir Kuznetsov (Lausanne-Jorat), 2. J.-Bernard Zosso (COC Genève), 3. Laurent Merat (O’Jura). Circuit technique court : 1. Thibault Rouiller (COC Genève), 2. exæquo Lennart Jirden (COC Genève) et Katya Kuznetsova (Lausanne-Jorat). Circuit facile moyen : 1. Tituan Barge...

  19. Club Orientation

    CERN Multimedia

    Club d'orientation

    2014-01-01

      COURSE ORIENTATION   Pas moins de 100 concurrents sont venus s’affronter sur les parcours proposés par le club d’orientation du CERN ce samedi 26 avril lors de la 4e étape de la coupe genevoise de printemps. Les podiums ont été attribués à :  Technique long avec 19 postes : 1er Yvan Balliot, ASO Annecy en 1:01:39 ; 2e Dominique Fleurent, ASO Annecy, en 1:05:12 ; 3e Rémi Fournier, SOS Sallanches, en 1:05:40. Technique moyen avec 14 postes : 1er Jean-Bernard Zosso, CO CERN, en 46:42 ; 2e Céline Zosso, CO CERN, en 50:51 ; 3e Clément Poncet, O’Jura Prémanon, en 51:27. Technique court avec 13 postes : 1er Jaakko Murtomaki, YKV Seinaejoki, en 36:04 ; 2e Marc Baumgartner en 41:27 ; 3e Natalia Niggli, O’Jura Prémanon, en 52:43. Sur les parcours facile moyen et facile court, victoire respectivement de Stéphanie...

  20. Orienteering club

    CERN Multimedia

    Club d'orientation

    2010-01-01

    Course d’orientation : Coupe Genevoise de printemps 2010 Et c’est reparti pour une nouvelle saison! Pour cette coupe de printemps 2010, le Club d’Orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose le calendrier suivant: – samedi 20 mars : Cossonay (Vd) – samedi 10 avril : Echallens (Vd) – samedi 17 avril : Trélex (Vd) – samedi 24 avril : Genolier (Vd) – samedi 1 mai : Vulbens/Valleiry (74) – samedi 8 mai : Bois de la Rippe (Vd) – samedi 29 mai : Sauvabellin (Vd) : relais – samedi 5 juin: St Cergue (Vd) : grande finale Les courses populaires ont lieu en général le samedi après-midi, elles sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé, en famille ou en individuel, en promenade ou en course. Pour cela, divers types de parcours sont &agr...

  1. Orienteering club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Courses d’orientation Le soleil enfin de retour a incité nombre de sportifs et promeneurs à nous rejoindre dans la belle forêt de Challex /Pougny pour la deuxième étape de notre coupe de printemps 2013. Certains sont revenus crottés et fourbus alors que d’autres avaient les joues bien roses après un grand bol d’air frais. Mais tous avaient passé un agréable moment dans la nature. Nous rappelons que nos activités sont ouvertes à tous, jeunes, moins jeunes, sportifs, familles, du CERN ou d’ailleurs, et que le seul inconvénient est que si vous goûtez à la course d’orientation, il vous sera difficile de ne pas y revenir ! Samedi 20 avril 2013, nous serons sur le Mont Mourex (entre Gex et Divonne) pour notre prochaine épreuve et vous y serez les bienvenus. Les inscriptions et les départ...

  2. Orienteering club

    CERN Multimedia

    Orienteering Club

    2016-01-01

    Course d'orientation Calendrier des courses d’orientation Coupe genevoise d’automne 2016 Samedi 3 septembre : La Faucille (01) Samedi 10 septembre : Prémanon (39) Samedi 17 septembre : Saint-Cergue (VD) Samedi 24 septembre : Jorat / Corcelles (VD) Samedi 1 octobre: Bière - Ballens (VD) -relais Vendredi 14 octobre : Parc Mon Repos (GE) - nocturne Samedi 15 octobre : Terrasse de Genève (74) Samedi 29 octobre : Bonmont (VD) Samedi 5 novembre : Pomier (74) – one-man-relay - Finale   Courses ouvertes à toutes et à tous, sportifs, familles, débutants ou confirmés, du CERN ou d’ailleurs. Cinq circuits disponibles, ceci va du facile court (2 km) adapté aux débutants et aux enfants jusqu’au parcours technique long de 6 km pour les chevronnés en passant par les parcours facile moyen (4&am...

  3. Orienteering Club

    CERN Multimedia

    Le Club d’orientation du CERN

    2017-01-01

    Course orientation Les courses d’orientation comptant pour la coupe genevoise de printemps s’enchainent dans la région franco-suisse. Samedi dernier, une bonne centaine de coureurs se sont retrouvés au Mont Mourex où le club du CERN avait préparé la sixième épreuve. A l’issue de la course, les participants confirmaient l’exigence des circuits, à savoir la condition physique et le côté technique du traçage. Le parcours technique long comportant 20 postes a été remporté par Darrell High du Care Vevey en 1:22:38 devançant Beat Muller du COLJ Lausanne-Jorat en 1:25:25 et Alison High également du Care Vevey en 1:28:51. Le circuit technique moyen a été remporté par Christophe Vuitton du CO CERN et le circuit technique court par Claire-Lise Rouiller, CO CERN. Les trois pr...

  4. Orienteering club

    CERN Multimedia

    Club d’Orientation du CERN

    2015-01-01

    Courses d’orientation Nouvelle saison nouveau programme Le Club d’orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose une dizaine de courses populaires comptant pour la coupe Genevoise de printemps: samedi 28 mars: Vernand Dessus samedi 18 avril: Pougny/Challex samedi 25 avril: Chancy/Valleiry samedi 2 mai: Mauvernay samedi 9 mai: Longchaumois samedi 16 mai: Genolier samedi 30 mai: Prevondavaux samedi 6 juin: Biere-Ballens samedi 13 juin: Haut-Jura samedi 20 juin: Bonmont - Finale Ces courses sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé, en famille ou en individuel, en promenade ou en course. Les inscriptions se font sur place le jour de l’épreuve. Si vous êtes débutant, vous pouvez profiter d’une initiation offerte par l’organisateur avant de vous lancer sur un parcours. Le club propose aussi...

  5. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2015-01-01

    Course orientation C’est au pied du Salève, proche du Golf de Bosset, que le club d’orientation du CERN (CO CERN) a organisé samedi 19 septembre une nouvelle épreuve comptant pour la Coupe Genevoise d’automne. La zone « des Terrasses de Genève » avait été cartographiée et mise en service l’année dernière. Les participants ont pu apprécier un terrain ludique avec beaucoup de microreliefs, de points d’eau et de gros rochers, le tout au milieu d’une forêt assez claire et agréable à courir. Sur le parcours technique long, le résultat a été très serré puisque Pierrick Merino du club d’Annecy a gagné avec seulement 9 secondes d’avance sur Gaëtan Vuitton (CO CERN) qui confiait avoir perdu beaucoup du te...

  6. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2012-01-01

     Course d’orientation C’est sous un magnifique soleil que s’est tenue la 7e épreuve de la coupe genevoise organisée par le club d’orientation du CERN. Les organisateurs avaient concocté des parcours assez techniques sur le site de La Faucille. Sur le parcours technique long, beau podium avec la victoire de Domenico Lepori (double médaillés aux championnats du monde en 2010 en vétéran) du club Care Vevey en 1:00:23, juste devant Jürg Niggli du club O’Jura en 1:00:56 puis Beat Mueller du club Lausanne-Jorat en 1:04:28. Sur le parcours technique moyen, Franck Longchampt s’est octroyé la première place, sur le parcours technique court, le jeune Julien Vuitton, qui n’a pas tout à fait 11 ans, a remporté son circuit. Coté parcours facile moyen, Victor Kuznetsov a une fois de plus gagn&eacut...

  7. Electroluminescent, polycrystalline cadmium selenide nanowire arrays.

    Science.gov (United States)

    Ayvazian, Talin; van der Veer, Wytze E; Xing, Wendong; Yan, Wenbo; Penner, Reginald M

    2013-10-22

    Electroluminescence (EL) from nanocrystalline CdSe (nc-CdSe) nanowire arrays is reported. The n-type, nc-CdSe nanowires, 400-450 nm in width and 60 nm in thickness, were synthesized using lithographically patterned nanowire electrodeposition, and metal-semiconductor-metal (M-S-M) devices were prepared by the evaporation of two gold contacts spaced by either 0.6 or 5 μm. These M-S-M devices showed symmetrical current voltage curves characterized by currents that increased exponentially with applied voltage bias. As the applied biased was increased, an increasing number of nanowires within the array "turned on", culminating in EL emission from 30 to 50% of these nanowires at applied voltages of 25-30 V. The spectrum of the emitted light was broad and centered at 770 nm, close to the 1.74 eV (712 nm) band gap of CdSe. EL light emission occurred with an external quantum efficiency of 4 × 10(-6) for devices with a 0.60 μm gap between the gold contacts and 0.5 × 10(-6) for a 5 μm gap-values similar to those reported for M-S-M devices constructed from single-crystalline CdSe nanowires. Kelvin probe force microscopy of 5 μm nc-CdSe nanowire arrays showed pronounced electric fields at the gold electrical contacts, coinciding with the location of strongest EL light emission in these devices. This electric field is implicated in the Poole-Frenkel minority carrier emission and recombination mechanism proposed to account for EL light emission in most of the devices that were investigated.

  8. Quantification of nanowire uptake by live cells

    KAUST Repository

    Margineanu, Michael B.

    2015-05-01

    Nanostructures fabricated by different methods have become increasingly important for various applications at the cellular level. In order to understand how these nanostructures “behave” and for studying their internalization kinetics, several attempts have been made at tagging and investigating their interaction with living cells. In this study, magnetic iron nanowires with an iron oxide layer are coated with (3-Aminopropyl)triethoxysilane (APTES), and subsequently labeled with a fluorogenic pH-dependent dye pHrodo™ Red, covalently bound to the aminosilane surface. Time-lapse live imaging of human colon carcinoma HCT 116 cells interacting with the labeled iron nanowires is performed for 24 hours. As the pHrodo™ Red conjugated nanowires are non-fluorescent outside the cells but fluoresce brightly inside, internalized nanowires are distinguished from non-internalized ones and their behavior inside the cells can be tracked for the respective time length. A machine learning-based computational framework dedicated to automatic analysis of live cell imaging data, Cell Cognition, is adapted and used to classify cells with internalized and non-internalized nanowires and subsequently determine the uptake percentage by cells at different time points. An uptake of 85 % by HCT 116 cells is observed after 24 hours incubation at NW-to-cell ratios of 200. While the approach of using pHrodo™ Red for internalization studies is not novel in the literature, this study reports for the first time the utilization of a machine-learning based time-resolved automatic analysis pipeline for quantification of nanowire uptake by cells. This pipeline has also been used for comparison studies with nickel nanowires coated with APTES and labeled with pHrodo™ Red, and another cell line derived from the cervix carcinoma, HeLa. It has thus the potential to be used for studying the interaction of different types of nanostructures with potentially any live cell types.

  9. Electrodeposition of textured Bi{sub 27}Sb{sub 28}Te{sub 45} nanowires with enhanced electrical conductivity

    Energy Technology Data Exchange (ETDEWEB)

    Hasan, Maksudul, E-mail: maksudul.hasan@tyndall.ie [Tyndall National Institute, University College Cork, Lee Maltings, Cork (Ireland); Gautam, Devendraprakash [Tyndall National Institute, University College Cork, Lee Maltings, Cork (Ireland); Enright, Ryan [Thermal Management Research Group, Efficient Energy Transfer Department, Bell Labs Ireland, Alcatel-Lucent Ireland Ltd., Dublin (Ireland)

    2016-04-15

    This work presents the template based pulsed potential electrodeposition technique of highly textured single crystalline bismuth antimony telluride (Bi{sub 1-x}Sb{sub x}){sub 2}Te{sub 3} nanowires from a single aqueous electrolyte. Cyclic voltammetry was used as an electroanalytical tool to assess the effect of the precursor concentrations on the composition of the deposits and to determine the deposition potential for each element. Pulsed potential electrodeposition was then applied on a gold-coated anodised alumina template to examine the effect of the pulse parameters on the composition and texture of Bi{sub 27}Sb{sub 28}Te{sub 45} nanowires. The nanowires are cylindrical in shape formed during the deposition inside the porous template and highly textured as they are decorated with sparse distribution of small crystal domains. The electrical conductivity (24.1 × 10{sup 4} S m{sup −1}) of a single nanowire was measured using a four-point probe technique implemented on a custom fabricated test chip. In this work, we demonstrated that crystal orientation with respect to the transport direction controlled by tuning the pulsed electrodeposition parameters. This allowed us to realise electrical conductivities ∼2.5 times larger than Sb doped bismuth-tellurium based ternary material systems and similar to what is typically seen in binary systems. - Highlights: • Pulsed electrodeposition is described towards fabrication of (Bi{sub 1-x}Sb{sub x}){sub 2}Te{sub 3} nanowires. • The adopted method is compatible with existing CMOS process. • The nanowires were fabricated as highly textured to enhance phonon scattering. • The electrical conductivity is ∼2.5 times larger than the current ternary materials.

  10. Orienteering club

    CERN Multimedia

    Club d'orientation

    2011-01-01

    Reprise fin août Le Club d’orientation, en partenariat avec d’autres clubs de la région, vous propose une nouvelle série de courses pour cet automne. Le calendrier à retenir est le suivant : Samedi 27 août : Granges Malval (GE) – type classique Samedi 10 septembre : Lamoura (39) – type classique Samedi 17 septembre : La Dôle (F/VD) – type classique Samedi 24 septembre : Monteret (VD) – relais Samedi 8 octobre : Saint Cergue (VD) – type classique Vendredi 14 octobre : Les Evaux (GE) – nocturne Samedi 15 octobre : Grand Jorat (VD) – type classique Samedi 22 octobre : Pomier (74) – type classique Samedi 5 novembre : Echallens (VD) – type classique Samedi 12 novembre : CERN (GE) - sprint - Finale Généralement cinq circuits sont disponibles : ceci va du facile court (2 km) adapt&eacu...

  11. Orienting hypnosis.

    Science.gov (United States)

    Hope, Anna E; Sugarman, Laurence I

    2015-01-01

    This article presents a new frame for understanding hypnosis and its clinical applications. Despite great potential to transform health and care, hypnosis research and clinical integration is impaired in part by centuries of misrepresentation and ignorance about its demonstrated efficacy. The authors contend that advances in the field are primarily encumbered by the lack of distinct boundaries and definitions. Here, hypnosis, trance, and mind are all redefined and grounded in biological, neurological, and psychological phenomena. Solutions are proposed for boundary and language problems associated with hypnosis. The biological role of novelty stimulating an orienting response that, in turn, potentiates systemic plasticity forms the basis for trance. Hypnosis is merely the skill set that perpetuates and influences trance. This formulation meshes with many aspects of Milton Erickson's legacy and Ernest Rossi's recent theory of mind and health. Implications of this hypothesis for clinical skills, professional training, and research are discussed.

  12. Orientation games in kindergarten

    OpenAIRE

    Pišek, Anja

    2012-01-01

    The thesis presents the area of general orientation and orientation of the child. The focus is placed on orientation games for preschool children. The first part outlines different definitions of orientation, types of orientation, accessories for orientation and major errors in orientation. It also presents the development of spatial orientation of preschool children, the development of the concept of space according to the level of cognitive development in line with the theory by Piaget,...

  13. Silicon nanowire properties from theory and experiment

    Energy Technology Data Exchange (ETDEWEB)

    Scheel, H.M.

    2007-09-10

    Silicon has played an outstanding role at the end of the 20th century and is still one of the most important components for micro computing. In recent years the ability to miniaturize semiconductor structures and devices to nanometer length scales has opened an all new field of physics, i.e. nanoscience. Simply by miniaturizing the size of semiconducting structures the physics describing electronic or vibronic properties has to be altered fundamentally leading to new phenomena and interesting effects. For silicon the two major mile-stones where the fabrication of porous silicon and later the fabrication of free-standing silicon nanowires. The intense research concerning the fabrication of silicon nanowires has led to single crystalline nanowires with diameters of only a few nanometers. The hope that drove these intense research efforts where to find efficient photonic properties in these quantized systems. In the first part of this work detailed theoretical investigations are presented for the commonly observed ([111] and [11 anti 2]) representatives of free-standing and for the most frequently discussed ([001]) silicon nanowires not (so far) observed as free standing wires. Using density functional theory in the local density approximation the electronic properties as well as the structural changes due to the reduced dimensionality of silicon nanowires are calculated and discussed. The comparison to recent experimental, scanning tunneling experiments reveal a fundamental discrepancy between the calculated band structures and experimental findings. With our results we are able to explain these differences. Raman investigations on silicon nanowires where in a state of controversial discussion about the origin of observed red shifted spectra. Various contributions like quantum confinement, photo excitation and thermal effects where discussed. The second part of this thesis contributes to this discussion, with detailed laser power dependent Raman spectroscopic

  14. Sensors and devices containing ultra-small nanowire arrays

    Energy Technology Data Exchange (ETDEWEB)

    Xiao, Zhili

    2017-04-11

    A network of nanowires may be used for a sensor. The nanowires are metallic, each nanowire has a thickness of at most 20 nm, and each nanowire has a width of at most 20 nm. The sensor may include nanowires comprising Pd, and the sensor may sense a change in hydrogen concentration from 0 to 100%. A device may include the hydrogen sensor, such as a vehicle, a fuel cell, a hydrogen storage tank, a facility for manufacturing steel, or a facility for refining petroleum products.

  15. Light-trapping properties of the Si inclined nanowire arrays

    Science.gov (United States)

    Xu, Zhaopeng; Huangfu, Huichao; He, Long; Wang, Jiazhuang; Yang, Dong; Guo, Jingwei; Wang, Haiyan

    2017-01-01

    The light trapping performance of Si nanowire with different inclination angles were systematically studied by COMSOL Multiphysics. The inclined nanowires with inclination angles smaller than 60° show greater light trapping ability than their counterparts of the vertical nanowires. The Si solar cell with the inclined nanowires of the optimal parameters, whose θ=30°, P=400 nm, D=140 nm, can achieve a 32.395 mA/cm2 short circuit photocurrent density and a 35.655% conversion efficiency. The study of the inclined nanowire provides an effective way for further utilization of the incoming light.

  16. EDITORIAL: Optical orientation Optical orientation

    Science.gov (United States)

    SAME ADDRESS *, Yuri; Landwehr, Gottfried

    2008-11-01

    priority of the discovery in the literature, which was partly caused by the existence of the Iron Curtain. I had already enjoyed contact with Boris in the 1980s when the two volumes of Landau Level Spectroscopy were being prepared [2]. He was one of the pioneers of magneto-optics in semiconductors. In the 1950s the band structure of germanium and silicon was investigated by magneto-optical methods, mainly in the United States. No excitonic effects were observed and the band structure parameters were determined without taking account of excitons. However, working with cuprous oxide, which is a direct semiconductor with a relative large energy gap, Zakharchenya and his co-worker Seysan showed that in order to obtain correct band structure parameters, it is necessary to take excitons into account [3]. About 1970 Boris started work on optical orientation. Early work by Hanle in Germany in the 1920s on the depolarization of luminescence in mercury vapour by a transverse magnetic field was not appreciated for a long time. Only in the late 1940s did Kastler and co-workers in Paris begin a systematic study of optical pumping, which led to the award of a Nobel prize. The ideas of optical pumping were first applied by Georges Lampel to solid state physics in 1968. He demonstrated optical orientation of free carriers in silicon. The detection method was nuclear magnetic resonance; optically oriented free electrons dynamically polarized the 29Si nuclei of the host lattice. The first optical detection of spin orientation was demonstrated by with the III-V semiconductor GaSb by Parsons. Due to the various interaction mechanisms of spins with their environment, the effects occurring in semiconductors are naturally more complex than those in atoms. Optical detection is now the preferred method to detect spin alignment in semiconductors. The orientation of spins in crystals pumped with circularly polarized light is deduced from the degree of circular polarization of the recombination

  17. Identification and characterization of icosahedral metallic nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Pelaez, Samuel; Serena, Pedro A. [Instituto de Ciencia de Materiales de Madrid, Consejo Superior de Investigaciones Cientificas, c/Sor Juana Ines de la Cruz 3, Cantoblanco, 28049-Madrid (Spain); Guerrero, Carlo [Departamento de Fisica, Facultad Experimental de Ciencias, La Universidad del Zulia, Maracaibo (Venezuela); Paredes, Ricardo [Centro de Fisica, Instituto Venezolano de Investigaciones Cientificas, Apto. 20632, Caracas 1020A (Venezuela); Garcia-Mochales, Pedro [Departamento de Fisica de la Materia Condensada, Facultad de Ciencias, Universidad Autonoma de Madrid, c/Tomas y Valiente 7, Cantoblanco, 28049-Madrid (Spain)

    2009-10-15

    We present and discuss an algorithm to identify ans characterize the long icosahedral structures (staggered pentagonal nanowires with 1-5-1-5 atomic structure) that appear in Molecular Dynamics simulations of metallic nanowires of different species subjected to stretching. The use of the algorithm allows the identification of pentagonal rings forming the icosahedral structure as well as the determination of its number n{sub p}, and the maximum length of the pentagonal nanowire L{sub p}{sup m}. The algorithm is tested with some ideal structures to show its ability to discriminate between pentagonal rings and other ring structures. We applied the algorithm to Ni nanowires with temperatures ranging between 4 K and 865 K, stretched along the[100] direction. We studied statistically the formation of pentagonal nanowires obtaining the distributions of length L{sub p}{sup m} and number of rings n{sub p} as function of the temperature. The L{sub p}{sup m} distribution presents a peaked shape, with peaks locate at fixes distances whose separation corresponds to the distance between two consecutive pentagonal rings. (copyright 2009 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  18. Thermoelectric Properties of Semiconducting Silicide Nanowires

    Science.gov (United States)

    Jin, Song; Sczech, Jeannine; Higgins, Jeremy; Zhou, Feng; Shi, Li

    2008-03-01

    Semiconducting silicides are promising thermoelectric materials. In addition to their respectable thermoelectric figure-of-merit (ZT up to 0.8), silicides have the advantages of low cost, excellent thermal stability and mechanical strength, and outstanding oxidation resistance, making them suitable for high temperature applications. We have developed general synthetic approaches to single crystal nanowires of silicides to investigate the enhancement of thermoelectric properties due to the reduced nanoscale dimension and to explore their applications in thermoelectrics. We will discuss the synthesis and structural characterization of nanowires of chromium disilicide (CrSi2) prepared via a chemical vapor transport (CVT) method and chemical vapor deposition (CVD) of organometallic precursors to synthesize the Novontony Chimney ladder phase MnSi1.75. The Seebeck coefficient, electrical conductivity, and thermal conductivity of individual CrSi2 nanowires were characterized using a suspended microdevice and correlated with the structural information obtained by microscopy on the same nanowires. This combined Seebeck coefficient and electrical conductivity measurements also provide an effective approach to probing the Fermi level, carrier concentration and mobility in nanowires. We will also discuss our progress in using individual nanostructures combined well-defined structural characterization to conclusively investigate the complex thermoelectric behaviors of silicide materials.

  19. Growth Mechanism of Nanowires: Ternary Chalcogenides

    Science.gov (United States)

    Singh, N. B.; Coriell, S. R.; Hopkins, R. H.; Su, Ching Hua; Arnold, B.; Choa, Fow-Sen; Cullum, Brian

    2016-01-01

    In the past two decades there has been a large rise in the investment and expectations for nanotechnology use. Almost every area of research has projected improvements in sensors, or even a promise for the emergence of some novel device technologies. For these applications major focuses of research are in the areas of nanoparticles and graphene. Although there are some near term applications with nanowires in photodetectors and other low light detectors, there are few papers on the growth mechanism and fabrication of nanowire-based devices. Semiconductor nanowires exhibit very favorable and promising optical properties, including high transparency and a several order of magnitude better photocurrent than thin film and bulk materials. We present here an overview of the mechanism of nanowire growth from the melt, and some preliminary results for the thallium arsenic selenide material system. Thallium arsenic selenide (TAS) is a multifunctional material combining excellent acousto-optical, nonlinear and radiation detection properties. We observed that small units of (TAS) nanocubes arrange and rearrange at moderate melt undercooling to form the building block of a nanowire. In some cases very long wires (less than mm) are formed. Since we avoided the catalyst, we observed self-nucleation and uncontrolled growth of wires from different places.

  20. Nanowire Electrodes for Advanced Lithium Batteries

    Directory of Open Access Journals (Sweden)

    Lei eHuang

    2014-10-01

    Full Text Available Since the commercialization of lithium ion batteries (LIBs in the past two decades, rechargeable LIBs have become widespread power sources for portable devices used in daily life. However, current demands require higher energy density and power density of batteries. The electrochemical energy storage performance of LIBs could be improved by applying nanomaterial electrodes, but their fast capacity fading is still one of the key limitations and the mechanism needs to be clearly understood. Single nanowire electrode devices are considered as a versatile platform for in situ probing the direct relationship between electrical transport, structure change, and other properties of the single nanowire electrode along with the charge/discharge process. The results indicate the conductivity decrease of the nanowire electrode and the structural disorder/destruction during electrochemical reactions which limit the cycling performance of LIBs. Based on the in situ observations, some feasible structure architecture strategies, including prelithiation, coaxial structure, nanowire arrays and hierarchical structure architecture, are proposed and utilized to restrain the conductivity decrease and structural disorder/destruction. Further, the applications of nanowire electrodes in some beyond Li-ion batteries, such as Li-S and Li-air battery, are also described.

  1. Directed Assembly of Cells with Magnetic Nanowires

    Science.gov (United States)

    Tanase, M.; Hultgren, A.; Chen, C. S.; Reich, D. H.

    2003-03-01

    We demonstrate the use of magnetic nanowires for assembly and manipulation of mammalian cells. Currently, superparamagnetic beads are used for manipulations of cells, but large field strengths and gradients are required for these to be effective. Unlike the beads, the large remnant magnetization of the nanowires offers the prospect of a variety of low-field manipulation techniques. Ferromagnetic nanowires suspended in fluids can be easily manipulated and assembled using small magnetic field [1]. The wires can be bound to cells, and the dipolar interaction between the nanowires can be used to create self-assembled cell chains. Microfabricated arrays of Py magnets were used to trap single cells or chains of cells bound to Ni nanowires. Possible applications of these techniques include controlled initiation of cell cultures, as well as isolation of individual cells. This work was supported by DARPA/AFOSR Grant No. F49620-02-1-0307 and by the David and Lucile Packard Foundation Grant No. 2001-17715. [1] M. Tanase et.al., Nanoletters 1, 155 (2001), J. Appl. Phys. 91, 8549 (2002).

  2. Metastable magnetic domain walls in cylindrical nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Ferguson, C.A.; MacLaren, D.A.; McVitie, S., E-mail: Stephen.McVitie@glasgow.ac.uk

    2015-05-01

    The stability of the asymmetric domain wall (ATDW) in soft magnetic cylindrical nanowires and nanotubes is investigated using micromagnetic simulations. Our calculated phase diagram shows that for cylindrical permalloy nanowires, the transverse domain wall (TDW) is the ground state for radii below 20 nm whilst the Bloch point wall (BPW) is favoured in thicker wires. The ATDW stabilises only as a metastable state but with energy close to that of the BPW. Characterisation of the DW spin structures reveals that the ATDW has a vortex-like surface spin state, in contrast to the divergent surface spins of the TDW. This results in lowering of surface charge above the critical radius. For both cylindrical nanotubes and nanowires we find that ATDWs only appear to exist as metastable static states and are particularly suppressed in nanotubes due to an increase in magnetostatic energy. - Highlights: • We simulate the micromagnetic structures of domain walls in cylindrical nanowires. • A phase diagram identifies ground and metastable states. • Asymmetric transverse walls are metastable in nanowires but suppressed in tubes. • Unrolling surface magnetisation aids visualisation of asymmetry and chirality. • We predict experimental discrimination based on magnetic charge distribution.

  3. Preparation and Characteristic of Relative-Humidity Sensors Based on Laterally Grown ZnO Nanowires

    Science.gov (United States)

    Tsai, Fu-Shou; Wang, Shui-Jinn; Tu, Yung-Chun; Lin, Tseng-Hsing

    2013-06-01

    The use of laterally oriented zinc oxide nanowires (ZnO NWs) grown by a hydrothermal growth (HTG) method for relative-humidity (RH) sensing devices at room temperature (RT) is demonstrated. Sensing response under various RH conditions (12-96%) at RT is presented and discussed. A humidity sensor based on laterally oriented ZnO NWs with a sensing response (R12%/R96%) as high as 2.2 was obtained at RT. The RT-operable humidity-sensing characteristics with comparably good sensitivity of the proposed humidity sensors is attributed to the full utilization of the entire NW surface, because the current path is aligned with the orientation of the bridged lateral ZnO NWs during the humidity sensing application, thus making possible.

  4. Detection of charge dynamics of a tetraphenylporphyrin particle using GaAs-based nanowire enhanced by particle-metal tip capacitive coupling

    Science.gov (United States)

    Okamoto, Shoma; Sato, Masaki; Sasaki, Kentaro; Kasai, Seiya

    2017-06-01

    We investigate a detection technique of charge dynamics of a molecular particle using a GaAs-based nanowire where the charge sensitivity is locally enhanced by particle-metal tip capacitive coupling. By equivalent circuit analysis, it was clarified that the nanowire channel potential becomes sensitive to the molecular particle on the nanowire when the particle is capacitively coupled with a metal tip. The concept was demonstrated using a GaAs-based nanowire with tetraphenylporphyrin (TPP) particles on its surface and a measurement system integrating an atomic force microscope (AFM) and a dynamic current measurement monitor/spectrum analyzer. When the metal tip was in contact with a TPP particle on the nanowire under an appropriate tip bias condition, random telegraph signal (RTS) noise was imposed on the nanowire current, suggesting the increase in sensitivity to the charge state of the particle by the metal tip contact. We discussed the origin of the RTS noise through analysis of the time constant of RTS noise, RTS amplitude, and noise spectrum.

  5. Synthesis of nanostructures in nanowires using sequential catalyst reactions

    Science.gov (United States)

    Panciera, F.; Chou, Y.-C.; Reuter, M.C.; Zakharov, D.; Stach, E.A.; Hofmann, S.; Ross, F.M.

    2016-01-01

    Nanowire growth by the vapor-liquid-solid process enables a high level of control over nanowire composition, diameter, growth direction, branching and kinking, periodic twinning, and crystal structure. The tremendous impact of VLS-grown nanowires is due to this structural versatility, generating applications ranging from solid state lighting and single photon sources to thermoelectric devices. Here we show that the morphology of these nanostructures can be further tailored by using the liquid droplets that catalyze nanowire growth as a “mixing bowl”, in which growth materials are sequentially supplied to nucleate new phases. Growing within the liquid, these phases adopt the shape of faceted nanocrystals that are then incorporated into the nanowires by further growth. We demonstrate this concept by epitaxially incorporating metal silicide nanocrystals into Si nanowires with defect-free interfaces, and discuss how this process can be generalized to create complex nanowire-based heterostructures. PMID:26168344

  6. Tunable magnetic nanowires for biomedical and harsh environment applications

    KAUST Repository

    Ivanov, Yurii P.

    2016-04-13

    We have synthesized nanowires with an iron core and an iron oxide (magnetite) shell by a facile low-cost fabrication process. The magnetic properties of the nanowires can be tuned by changing shell thicknesses to yield remarkable new properties and multi-functionality. A multi-domain state at remanence can be obtained, which is an attractive feature for biomedical applications, where a low remanence is desirable. The nanowires can also be encoded with different remanence values. Notably, the oxidation process of single-crystal iron nanowires halts at a shell thickness of 10 nm. The oxide shell of these nanowires acts as a passivation layer, retaining the magnetic properties of the iron core even during high-temperature operations. This property renders these core-shell nanowires attractive materials for application to harsh environments. A cell viability study reveals a high degree of biocompatibility of the core-shell nanowires.

  7. A detailed study of magnetization reversal in individual Ni nanowires

    KAUST Repository

    Vidal, Enrique Vilanova

    2015-01-19

    Magnetic nanowires have emerged as essential components for a broad range of applications. In many cases, a key property of these components is the switching field, which is studied as a function of the angle between the field and the nanowire. We found remarkable differences of up to 100% between the switching fields of different nanowires from the same fabrication batch. Our experimental results and micromagnetic simulations indicate that the nanowires exhibit a single domain behavior and that the switching mechanism includes vortex domain wall motion across the nanowire. The differences between the switching fields are attributed to different cross-sections of the nanowires, as found by electron microscopy. While a circular cross-section yields the smallest switching field values, any deviation from this shape results in an increase of the switching field. The shape of the nanowires\\' cross-sections is thus a critical parameter that has not been previously taken into account.

  8. Microfiber coupled superconducting nanowire single-photon detectors

    Science.gov (United States)

    Xu, Yingxin; Wu, Junjie; Fang, Wei; You, Lixing; Tong, Limin

    2017-12-01

    Superconducting nanowires single-photon detectors (SNSPDs or SSPDs) have emerged as an attractive single-photon detection technology with high performance. Two types of SNSPDs have been developed so far. One is the standard-fiber-coupled SNSPD with the light normally incident on the meandered nanowires, the other is waveguide-coupled SNSPD with the nanowires fabricated on the surface of the waveguide which guides photons while the fiber is coupled to the waveguide. Here we propose a new type of SNSPD integrated with microfiber. The photons are guided by a microfiber and evanescently absorbed by the nanowire of SNSPD when the nanowire is parallel and very close to the microfiber. The numerical simulation results show that the fiber to detector coupling efficiency can be close to unity with optimized device structure/parameters. With a minimal total NbN nanowire length of about 300 μm, the absorption of the nanowire can reach 90%.

  9. Solution-processed metal nanowire mesh transparent electrodes.

    Science.gov (United States)

    Lee, Jung-Yong; Connor, Stephen T; Cui, Yi; Peumans, Peter

    2008-02-01

    Transparent conductive electrodes are important components of thin-film solar cells, light-emitting diodes, and many display technologies. Doped metal oxides are commonly used, but their optical transparency is limited for films with a low sheet resistance. Furthermore, they are prone to cracking when deposited on flexible substrates, are costly, and require a high-temperature step for the best performance. We demonstrate solution-processed transparent electrodes consisting of random meshes of metal nanowires that exhibit an optical transparency equivalent to or better than that of metal-oxide thin films for the same sheet resistance. Organic solar cells deposited on these electrodes show a performance equivalent to that of devices based on a conventional metal-oxide transparent electrode.

  10. Vertically Integrated Multiple Nanowire Field Effect Transistor.

    Science.gov (United States)

    Lee, Byung-Hyun; Kang, Min-Ho; Ahn, Dae-Chul; Park, Jun-Young; Bang, Tewook; Jeon, Seung-Bae; Hur, Jae; Lee, Dongil; Choi, Yang-Kyu

    2015-12-09

    A vertically integrated multiple channel-based field-effect transistor (FET) with the highest number of nanowires reported ever is demonstrated on a bulk silicon substrate without use of wet etching. The driving current is increased by 5-fold due to the inherent vertically stacked five-level nanowires, thus showing good feasibility of three-dimensional integration-based high performance transistor. The developed fabrication process, which is simple and reproducible, is used to create multiple stiction-free and uniformly sized nanowires with the aid of the one-route all-dry etching process (ORADEP). Furthermore, the proposed FET is revamped to create nonvolatile memory with the adoption of a charge trapping layer for enhanced practicality. Thus, this research suggests an ultimate design for the end-of-the-roadmap devices to overcome the limits of scaling.

  11. Electrowetting on ZnO nanowires

    Science.gov (United States)

    Wu, Jun; Xia, Jun; Lei, Wei; Wang, Bao-Ping

    2010-06-01

    In this paper, we study the electrowetting character on ZnO nanowires. We grow the ZnO nanowires on indium tin oxide (ITO) by a hydrothermal method, and the ZnO nanowires surface is further hydrophobized by spin-coating Teflon. Such a prepared surface shows superhydrophobic properties with an initial contact angle 165°. When the applied external voltage between the ITO and the sessile droplet is less than 50 V, the contact angle continuously changed from 165° to 120°, and exhibits instant reversibility. For a slightly higher voltage, a mutation of the contact angle changing to 100° was observed and the contact angle was not reversible after removing the applied voltage, which indicates a transition from non-wetting state to wetting state. Further increasing of the applied voltage, the apparent contact angle decreased to an invariable value 70°, and electrical breakdown emerged synchronously.

  12. Roll up nanowire battery from silicon chips.

    Science.gov (United States)

    Vlad, Alexandru; Reddy, Arava Leela Mohana; Ajayan, Anakha; Singh, Neelam; Gohy, Jean-François; Melinte, Sorin; Ajayan, Pulickel M

    2012-09-18

    Here we report an approach to roll out Li-ion battery components from silicon chips by a continuous and repeatable etch-infiltrate-peel cycle. Vertically aligned silicon nanowires etched from recycled silicon wafers are captured in a polymer matrix that operates as Li(+) gel-electrolyte and electrode separator and peeled off to make multiple battery devices out of a single wafer. Porous, electrically interconnected copper nanoshells are conformally deposited around the silicon nanowires to stabilize the electrodes over extended cycles and provide efficient current collection. Using the above developed process we demonstrate an operational full cell 3.4 V lithium-polymer silicon nanowire (LIPOSIL) battery which is mechanically flexible and scalable to large dimensions.

  13. How Copper Nanowires Grow and How To Control Their Properties.

    Science.gov (United States)

    Ye, Shengrong; Stewart, Ian E; Chen, Zuofeng; Li, Bo; Rathmell, Aaron R; Wiley, Benjamin J

    2016-03-15

    Scalable, solution-phase nanostructure synthesis has the promise to produce a wide variety of nanomaterials with novel properties at a cost that is low enough for these materials to be used to solve problems. For example, solution-synthesized metal nanowires are now being used to make low cost, flexible transparent electrodes in touch screens, organic light-emitting diodes (OLEDs), and solar cells. There has been a tremendous increase in the number of solution-phase syntheses that enable control over the assembly of atoms into nanowires in the last 15 years, but proposed mechanisms for nanowire formation are usually qualitative, and for many syntheses there is little consensus as to how nanowires form. It is often not clear what species is adding to a nanowire growing in solution or what mechanistic step limits its rate of growth. A deeper understanding of nanowire growth is important for efficiently directing the development of nanowire synthesis toward producing a wide variety of nanostructure morphologies for structure-property studies or producing precisely defined nanostructures for a specific application. This Account reviews our progress over the last five years toward understanding how copper nanowires form in solution, how to direct their growth into nanowires with dimensions ideally suited for use in transparent conducting films, and how to use copper nanowires as a template to grow core-shell nanowires. The key advance enabling a better understanding of copper nanowire growth is the first real-time visualization of nanowire growth in solution, enabling the acquisition of nanowire growth kinetics. By measuring the growth rate of individual nanowires as a function of concentration of the reactants and temperature, we show that a growing copper nanowire can be thought of as a microelectrode that is charged with electrons by hydrazine and grows through the diffusion-limited addition of Cu(OH)2(-). This deeper mechanistic understanding, coupled to an

  14. Crystallographic orientation of facets and planar defects in functional nanostructures elucidated by nano-focused coherent diffractive X-ray imaging.

    Science.gov (United States)

    Richard, Marie-Ingrid; Fernández, Sara; Eymery, Joël; Hofmann, Jan Philipp; Gao, Lu; Carnis, Jérôme; Labat, Stéphane; Favre-Nicolin, Vincent; Hensen, Emiel J M; Thomas, Olivier; Schülli, Tobias U; Leake, Steven J

    2018-02-23

    The physical and chemical properties of nanostructures depend on their surface facets. Here, we exploit a pole figure approach to determine the three-dimensional orientation matrix of a nanostructure from a single Bragg reflection measured with a coherent nano-focused X-ray beam. The signature of any truncated (faceted) crystal produces a crystal truncation rod, which corresponds to a streak of intensity in reciprocal space normal to the surface. When two or more non-parallel facets are present, both the crystal orientation and the crystal facets can be identified. This enables facets to be rapidly indexed and uncommon facets, and planar defects, that have been difficult to study before to be identified. We demonstrate the technique with (i) epitaxial core-shell InGaN/GaN multiple quantum-wells grown on GaN nanowires, where surface facets and planar defects are determined, and (ii) single randomly oriented highly faceted tetrahedrahexal Pt nanoparticles. The methodology is applicable to a broad range of nanocrystals and provides a unique insight into the connection between structure and properties of nanomaterials.

  15. Orienteering club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Courses d’orientation Samedi 20 avril, les organisateurs du Club de CO du CERN ont accueilli au Mont Mourex 70 participants qui n’ont pas hésité à venir malgré la forte bise. Berni Wehrle du CO CERN s’est octroyé la première place en 1:04:49 sur le parcours technique long devant Pyry Kettunen du Saynso Juankoski en 1:06:52, la 3e place revenant à Bruno Barge, CO CERN, à 7 secondes. Les autres parcours ont été remportés par : Technique moyen : 1er Jacques Moisset, Chamonix (47:44), 2e Yves Rousselot, Balise 25 Besançon (57:16), 3e Jean-Bernard Zosso, CO CERN (59:28). Technique court : 1er Victor Kuznetsov, COLJ (51:53), 2e Pierrick Collet, CO CERN (1:12:52), 3e Dominique Balay, CO CERN (1:16:04). Pour les parcours facile moyen et facile court, Ralf Nardini et Léa Nicolas, tous deux du CO CERN, terminaient respectivement premier. Voi...

  16. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2012-01-01

    Relais inter-club/Challenge Carlo Milan Samedi dernier, lors de l’épreuve de course d’orientation organisée par le club du O’Jura, le moteur de la discipline était l’esprit d’équipe, puisqu’il était question d’un relais inter-club avec le Challenge Carlo Milan. Les clubs avaient aligné leurs coureurs soit sur le relais technique (trois participants) soit sur le relais facile (deux participants). Côté O’Jura, il fallait noter la participation de François Gonon, champion du monde 2011, côté club du CERN, Marie et Gaëtan Vuitton, jeunes espoirs du club, devaient préparer la piste pour lancer le dernier relayeur. Côté Lausanne-Jorat, il fallait compter sur le très jeune Viktor Kuznetsov. Les 31 équipes engagées n’ont pas m&ea...

  17. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2012-01-01

     Finale de la coupe de printemps   La dernière course d’orientation comptant pour la Coupe de printemps a eu lieu samedi dernier dans le village des Rousses et vers le Fort. Il s’agissait d’un sprint organisé par le club O’Jura. Les temps de course ont avoisiné les 20 minutes que ce soit pour le parcours technique moyen ou technique long. Tous les habitués étaient au rendez-vous pour venir consolider ou améliorer leur place au classement. A l’issue de cette course, le classement général de la Coupe de printemps prenant en compte les 6 meilleurs résultats des 9 courses était établi et les lauréats de chaque catégorie sont les suivants: Circuit technique long : 1er Berni Wehrle, 2e Bruno Barge, 3e Edvins Reisons. Circuit technique moyen : 1er Jean-Bernard Zosso, 2e Cédric Wehrl&...

  18. Orienteering club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Course d'orientation Vers les dernières courses de printemps Une centaine de coureurs se sont déplacés sur le site de la Roche Fendue prés de Morez pour gouter à un des 5 parcours proposés par le club du O’Jura. Le terrain était gras mais que peut-on trouver d’autre avec cette météo! Les vainqueurs de chaque circuit sont : Alina Niggli (O’Jura) facile court, Natalja Niggli (O’Jura) facile moyen, Victor Kuznetsov (COLJ) technique court, Yves Rousselot (Balise 25) technique moyen et pour finir François Gonon (O’Jura) avec une victoire haut la main sur le technique long. Il ne reste plus que deux épreuves pour la coupe genevoise de printemps : à savoir samedi 8 juin, course de type longue distance organisée par le club de Lausanne Jorat (COLJ) dans le bois de Seyte sur Mutrux/Concise, inscription de 12h &...

  19. Orienteering Club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Finale de la coupe d’automne La dernière épreuve de la coupe d’automne organisée par le club d’orientation du CERN s’est déroulée ce samedi 2 novembre avec une course au score dans le bois Tollot (GE). Les concurrents disposaient d’un temps imparti pour poinçonner le maximum de balises différemment placées selon le circuit choisi. Juerg Niggli (club O’Jura) a remporté le parcours technique long. A l’issue de cette course, le classement général de la coupe d’automne, basé sur les 6 meilleurs résultats de la saison, est le suivant : Circuit technique long : 1er Juerg Niggli (O’Jura), 2e Bruno Barge, 3e Beat Mueller. Circuit technique moyen : 1er Laurent Merat (O’Jura), 2e Jirden Lennart, 3e Daria Niggli. Circuit technique court : 1er Victor Kuznetsov (COLJ), 2e N...

  20. Orienteering club

    CERN Multimedia

    Club d'orientation

    2014-01-01

    Course d'orientation Finale de la coupe d’automne La dernière épreuve de la coupe d’automne organisée par le club s’est déroulée ce samedi 1er novembre avec une course type «one-man-relay» dans la forêt de Trelex (Vd). Les concurrents des circuits techniques devaient parcourir trois boucles et ceux des circuits «faciles» deux boucles, avec changements de carte. Le parcours technique long a été remporté par un membre du club, Berni Wehrle. A l’issue de cette course, le Président du club, L. Jirden annonçait le classement général de la coupe d’automne, basé sur les 6 meilleurs résultats de la saison : Circuit technique long : 1er Juerg Niggli (O’Jura), 2e Berni Wehrle, 3e Beat Mueller. Circuit technique moyen : 1er Laurent Merat (O&r...

  1. Orienteering club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Course d'orientation Finale de la coupe genevoise Rapide et méthodique, voilà les qualités dont il fallait faire preuve pour remporter la dernière étape de la coupe organisée par le club du CERN dans les bois de Monteret. Il s’agissait d’une course au score où chaque concurrent disposait d’un temps imparti pour poinçonner le maximum de balises. Le parcours technique a été remporté par Tomas Shellman et le parcours facile par Victor Dannecker. Cette dernière étape était aussi décisive pour la désignation des lauréats de la coupe genevoise de printemps. Les résultats officiels étaient donnés par le président du club, L. Jirden : Circuit Technique Long : Berni Wehrle, Bruno Barge, Edvins Reisons Circuit Technique Moyen : J.-Bernard Zosso, ...

  2. Orienteering club

    CERN Multimedia

    Club d'orientation

    2010-01-01

    COURSE D’ORIENTATION  De La Rippe à Sauvabellin, la coupe genevoise continue ! Le rendez-vous était donné samedi 8 mai aux amateurs de course d’orientation dans les bois de La Rippe (Canton de Vaud). Cette 6e épreuve était organisée par le Club Satus Grutli de Genève. Il est dommage que les participants n’aient pas été aussi nombreux que lors des dernières courses, les Championnats de France des clubs à Dijon ayant certainement retenus plus d’un compétiteur. La première place est revenue à : – Technique long : Berni Wehrle – Technique moyen : Jean-Bernard Zosso – Technique court : Berni Wehrle – Facile moyen : Peter Troscanyi – Facile court : Claire Droz. Il ne restera plus que deux épreuves ...

  3. Orienteering Club

    CERN Multimedia

    Club d'orientation

    2012-01-01

    Finale de la coupe d’automne   La coupe d’automne organisée par le club d’orientation du CERN s’est terminée ce samedi 10 novembre avec une course sprint à Prévessins. C’était la 12e épreuve de la saison. En stage dans la région, Tanya Ryabkina, championne d’Europe en titre et médaillée de bronze en moyenne distance lors des championnats du monde à La Givrine cet été, a fait l’honneur de sa présence et termine 2e à 8 secondes de Trygve Buanes, norvégien du club de Bergen. A l’issue de cette dernière épreuve, le classement général de la coupe d’automne, basé sur les 8 meilleurs résultats de la saison, est ainsi le suivant : Circuit technique long : 1er Jurg Niggli (O&rsqu...

  4. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2012-01-01

    Course d'orientation Ces deux dernières semaines, le club a organisé la troisième puis la quatrième étape de la coupe de printemps, une dans la forêt de Collogny/Moissey près de Vulbens, l’autre vers le parcours vita de Trélex. Les résultats sont: Facile court Vulbens : 1er Léo Lonchampt, O’Jura (16:04), 2e Timothée Bazin (23:07), 3e Francesco Pieri (26:57) Trélex : 1er Noora Maurent (23:11), 2e Sarah Stuber, COLJ (26:51), 3e T. Bazin (28:17) Facile moyen Vulbens : 1er Victor Kuznetsov, CO CERN (25:36), 2e Didier Descourvières (28:03), 3e Konstantinos Haider, CO CERN (36:53) Trélex : 1er V. Kuznetsov, COLJ (38:01), 2e K. Haider, CO CERN (43:15), 3e ex aequo Olivia Nguyen et Sven Vietmeier (58:11) Technique court Vulbens : 1er Benoit Bazin (41:21), 2e Colas Gintzburger (55:12), 3e Nathan Freydoz (55:48) Trélex : 1...

  5. Orienteering club

    CERN Multimedia

    Club d'orientation

    2014-01-01

    Course d'orientation C’est sous un beau soleil samedi 4 octobre que s’est déroulée la 6e étape de la Coupe genevoise d’automne organisée par le club. Plus d’une centaine de concurrents provenant de 7 clubs de CO avaient fait le déplacement pour courir sur un des cinq parcours proposés dans les bois de Trélex-Génolier (VD). Le podium est le suivant : Technique long (5,9 km, 19 postes) : 1er Jurg Niggli, O’Jura (1:00:02); 2e Berni Wehrle, CO CERN (1:06:44); 3e Konrad Ehrbar, COLJ (1:07:08) Technique moyen (4,8 km, 18 postes) : 1er Christophe Vuitton, CO CERN (54:25); 2e J.B. Zosso, CO CERN (1:01:19); 3e Jeremy Wichoud, COLJ (1:06:21) Technique court (3,8 km, 14 postes) : 1er Julien Vuitton, CO CERN (36:19); 2e Vladimir Kuznetsov, COLJ (48:47); 3e Natalia Niggli, O’Jura (50:38) Facile moyen (3,2 km, 11 postes) : 1ère Alina Niggli, O&...

  6. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2015-01-01

    Course orientation Finale de la coupe genevoise La série des courses de printemps s’est achevée samedi dernier dans les bois de Bonmont (Vaud) avec une épreuve «one-man-relay» organisée par le club. Le vainqueur du parcours technique  long, Yann Locatelli (Club de Chambéry Savoie) a réalisé les deux boucles comportant 24 balises avec presque 6 minutes d’avance sur le second concurrent Domenico Lepori (Club CARE Vevey). Cette dernière étape était aussi décisive pour la désignation des lauréats de la coupe genevoise de printemps, en comptabilisant les 6 meilleurs résultats sur les 10 épreuves. Le podium officiel était donné par le président du club, L. Jirden, qui profitait de l’occasion pour remercier tous les participants et également tous les...

  7. Orienteering Club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    De jour comme de nuit Les amateurs de course d’orientation ont pu s’en donner à cœur joie ce week-end puisqu’ils avaient la possibilité de courir sur deux épreuves en moins de 24 heures. En effet, le club du CERN organisait une course de nuit aux Evaux et la 7e étape de la coupe genevoise se tenait samedi après-midi dans les bois du Grand Jorat à Savigny. Les vainqueurs pour chaque course sont : Technique long CO de nuit: Julien Charlemagne, SOS Sallanches CO samedi: Philipp Khlebnikov, ANCO   Technique moyen CO de nuit: Céline Zosso, CO CERN CO samedi: Pavel Khlebnikov, ANCO Technique court CO de nuit: Colas Ginztburger, SOS Sallanches CO samedi: Victor Kuznetsov, COLJ Lausannne Facile moyen CO de nuit: Gaëtan Rickenbacher, CO CERN CO samedi: Tamas Szoke   Facile court CO de nuit:Oriane Rickenbacher, CO CERN CO samedi: Katya Kuznetsov...

  8. Orienteering Club

    CERN Document Server

    CLUB D'ORIENTATION

    2013-01-01

    Calendrier de la coupe d’automne Le Club d’orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose, pour cette nouvelle coupe d’automne genevoise, une série de 10 courses. Le club du O’Jura donnera le coup d’envoi le samedi 31 août. Les courses s’enchaîneront selon le calendrier suivant : Samedi 31 août : Prémanon (39) - longue distance Samedi 14 septembre : La Faucille (01) - longue distance Samedi 21 septembre : Saint Cergue (VD) - longue distance Samedi 28 septembre : Ballens (VD) - relais Samedi 5 octobre : La Pile (VD) - longue distance Vendredi 11 octobre : Les Evaux (GE) - nocturne Samedi 12 octobre : Grand Jorat, Savigny (VD) - longue distance Samedi 19 octobre : Terrasses de Genève (74) - longue distance Samedi 26 octobre : Prémanon (39) - longue distance Samedi 2 novembre : Bois Tollot (GE) - score - Finale Les &a...

  9. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2011-01-01

    Course d'orientation Avec la CO en nocturne organisée par le club du CERN vendredi 14 octobre au stade des Eveaux (Ge), et la CO à Savigny (Vd) proposée par le club de Lausanne-Jorat le lendemain, les étapes de la coupe genevoise d’automne s’enchainent rapidement. Il ne reste plus que 3 rendez-vous pour boucler la saison. Les premières places devraient certainement se jouer entre des membres du club du CERN, du O’Jura ou de Lausanne-Jorat. La prochaine course du club est programmée pour samedi 22 octobre à Pomier, près de Cruseilles. L’accueil se fera à partir de 12h30 et les départs s’échelonneront de 13h à 15h. * * * * * * * Nouvelle belle victoire samedi 8 octobre à Saint Cergue du jeune finlandais Ville Keskisaari (COLJ) en 50:56 devant Jürg Niggli (O’Jura) en 1:03:32, et Alexandre...

  10. Orienteering Club

    CERN Document Server

    Club d'orientation

    2013-01-01

    Course d'orientation Le coup d’envoi de la coupe genevoise a été donné samedi 31 août dans les bois de Combe Froide à Prémanon. Plus de 150 coureurs avaient fait le déplacement. Les parcours facile court, facile moyen et technique court ont été remportés par des coureurs du club O’Jura - Ulysse Dannecker, Léo Lonchampt, Franck Lonchampt, le technique moyen par Pekka Marti du club Ol Biel Seeland et le technique long par Térence Risse du CA Rosé – également membre de l’équipe nationale suisse des moins de 20 ans. Pour le club du CERN, les meilleures résultats ont été obtenus pas Emese Szunyog sur technique court et Marie Vuitton sur technique moyen avec une 4e place. La prochaine course aura lieu samedi 14 septembre à La Faucille. Le club propose aussi...

  11. Size-Induced Switching of Nanowire Growth Direction: a New Approach Toward Kinked Nanostructures

    KAUST Repository

    Shen, Youde

    2016-04-26

    Exploring self-assembled nanostructures with controllable architectures has been a central theme in nanoscience and nanotechnology because of the tantalizing perspective of directly integrating such bottom-up nanostructures into functional devices. Here, the growth of kinked single-crystal In2O3 nanostructures consisting of a nanocone base and a nanowire tip with an epitaxial and defect-free transition is demonstrated for the first time. By tailoring the growth conditions, a reliable switching of the growth direction from [111] to [110] or [112] is observed when the Au catalyst nanoparticles at the apexes of the nanocones shrink below ≈100 nm. The natural formation of kinked nanoarchitectures at constant growth pressures is related to the size-dependent free energy that changes for different orientations of the nanowires. The results suggest that the mechanism of forming such kinked nanocone-nanowire nanostructures in well-controlled growth environment may be universal for a wide range of functional materials. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Diffraction at GaAs/Fe3Si core/shell nanowires: The formation of nanofacets

    Directory of Open Access Journals (Sweden)

    B. Jenichen

    2016-05-01

    Full Text Available GaAs/Fe3Si core/shell nanowire structures were fabricated by molecular-beam epitaxy on oxidized Si(111 substrates and investigated by synchrotron x-ray diffraction. The surfaces of the Fe3Si shells exhibit nanofacets. These facets consist of well pronounced Fe3Si{111} planes. Density functional theory reveals that the Si–terminated Fe3Si{111} surface has the lowest energy in agreement with the experimental findings. We can analyze the x-ray diffuse scattering and diffraction of the ensemble of nanowires avoiding the signal of the substrate and poly-crystalline films located between the wires. Fe3Si nanofacets cause streaks in the x-ray reciprocal space map rotated by an azimuthal angle of 30° compared with those of bare GaAs nanowires. In the corresponding TEM micrograph the facets are revealed only if the incident electron beam is oriented along [1 1 ¯ 0] in accordance with the x-ray results. Additional maxima in the x-ray scans indicate the onset of chemical reactions between Fe3Si shells and GaAs cores occurring at increased growth temperatures.

  13. Comparison of Current and Field Driven Domain Wall Motion in Beaded Permalloy Nanowires

    Science.gov (United States)

    Lage, Enno; Dutta, Sumit; Ross, Caroline A.

    2015-03-01

    Domain wall based devices are promising candidates for non-volatile memory devices with no static power consumption. A common approach is the use of (field assisted) current driven domain wall motion in magnetic nanowires. In such systems local variations in linewidth act as obstacles for propagating domain walls. In this study we compare simulated field driven and current driven domain wall motion in permalloy nanowires with anti-notches. The simulations were obtained using the Object Oriented MicroMagnetics Framework (OOMMF). The wires with a constant thickness of 8 nm exhibit linewidths ranging from 40 nm to 300 nm. Circular shaped anti-notches extend the linewidth locally by 10% to 30% and raise information about the domain wall propagation in such beaded nanowires. The results are interpreted in terms of the observed propagation behavior and summarized in maps indicating ranges of different ability to overcome the pinning caused by anti-notches of different sizes. Furthermore, regimes of favored domain wall type (transverse walls or vortex walls) and complex propagation effects like walker breakdown behavior or dynamic change between domain wall structures are identified The authors thank the German Academic Exchange Service (DAAD) for funding.

  14. Low temperature synthesis of seed mediated CuO bundle of nanowires, their structural characterisation and cholesterol detection

    Energy Technology Data Exchange (ETDEWEB)

    Ibupoto, Z.H., E-mail: zafar.hussin.ibupoto@liu.se [Department of Science and Technology, Linköping University, Campus Norrköping, SE-60174 Norrköping (Sweden); Khun, K. [Department of Science and Technology, Linköping University, Campus Norrköping, SE-60174 Norrköping (Sweden); Liu, X. [Department of Physics, Chemistry, and Biology (IFM), Linköping University, 58183 Linköping Sweden (Sweden); Willander, M. [Department of Science and Technology, Linköping University, Campus Norrköping, SE-60174 Norrköping (Sweden)

    2013-10-15

    In this study, we have successfully synthesised CuO bundle of nanowires using simple, cheap and low temperature hydrothermal growth method. The growth parameters such as precursor concentration and time for duration of growth were optimised. The field emission scanning electron microscopy (FESEM) has demonstrated that the CuO bundles of nanowires are highly dense, uniform and perpendicularly oriented to the substrate. The high resolution transmission electron microscopy (HRTEM) has demonstrated that the CuO nanostructures consist of bundle of nanowires and their growth pattern is along the [010] direction. The X-ray diffraction (XRD) technique described that CuO bundle of nanowires possess the monoclinic crystal phase. The surface and chemical composition analyses were carried out with X-ray photoelectron spectroscopy (XPS) technique and the obtained results suggested the pure crystal state of CuO nanostructures. In addition, the CuO nanowires were used for the cholesterol sensing application by immobilising the cholesterol oxidase through electrostatic attraction. The infrared reflection absorption spectroscopy study has also revealed that CuO nanostructures are consisting of only Cu-O bonding and has also shown the possible interaction of cholesterol oxidase with the sharp edge surface of CuO bundle of nanowires. The proposed cholesterol sensor has demonstrated the wide range of detection of cholesterol with good sensitivity of 33.88 ± 0.96 mV/decade. Moreover, the CuO bundle of nanowires based sensor electrode has revealed good repeatability, reproducibility, stability, selectivity and a fast response time of less than 10 s. The cholesterol sensor based on the immobilised cholesterol oxidase has good potential applicability for the determination of cholesterol from the human serum and other biological samples. - Highlights: • This study describes the synthesis of bundle of CuO nanowires by hydrothermal method. • CuO nanostructures exhibit good alignment and

  15. Micromagnetic Simulations of Anisotropies in Coupled and Uncoupled Ferromagnetic Nanowire Systems

    Directory of Open Access Journals (Sweden)

    T. Blachowicz

    2013-01-01

    Full Text Available The influence of a variation of spatial relative orientations onto the coupling dynamics and subsequent magnetic anisotropies was modeled in ferromagnetic nanowires. The wires were analyzed in the most elementary configurations, thus, arranged in pairs perpendicular to each other, leading to one-dimensional (linear and zero-dimensional (point-like coupling. Different distances within each elementary pair of wires and between the pairs give rise to varying interactions between parallel and perpendicular wires, respectively. Simulated coercivities show an exchange of easy and hard axes for systems with different couplings. Additionally, two of the systems exhibit a unique switching behavior which can be utilized for developing new functionalities.

  16. Electroless selective deposition of gold nano-array for silicon nanowires growth

    Directory of Open Access Journals (Sweden)

    Ruiz-Gomes E.

    2014-01-01

    Full Text Available Nanopatterns of gold clusters on a large surface of oriented Si(111 substrates, from the galvanic displacement of gold salt (via the spontaneous reduction of AuCl4 -, are demonstrated in this work. The Si substrate is patterned by Focused Ion Beam (FIB prior to being dipped in a gold solution. Here, we show that these patterns lead to successful control of the position and size of gold clusters. Sequential patterning reveals a powerful maskless alternative to surface preparation prior to Si nanowire growth

  17. Heteroepitaxial Patterned Growth of Vertically Aligned and Periodically Distributed ZnO Nanowires on GaN Using Laser Interference Ablation

    KAUST Repository

    Yuan, Dajun

    2010-08-23

    A simple two-step method of fabricating vertically aligned and periodically distributed ZnO nanowires on gallium nitride (GaN) substrates is described. The method combines laser interference ablation (LIA) and low temperature hydrothermal decomposition. The ZnO nanowires grow heteroepitaxially on unablated regions of GaN over areas spanning 1 cm2, with a high degree of control over size, orientation, uniformity, and periodicity. High resolution transmission electron microscopy and scanning electron microscopy are utilized to study the structural characteristics of the LIA-patterned GaN substrate in detail. These studies reveal the possible mechanism for the preferential, site-selective growth of the ZnO nanowires. The method demonstrates high application potential for wafer-scale integration into sensor arrays, piezoelectric devices, and optoelectronic devices. © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Imaging Electrons in Ultra-thin Nanowires

    Science.gov (United States)

    Boyd, Erin E.

    2011-12-01

    Ultra-thin semiconductor nanowires are promising systems in which to explore novel low-dimensional physics and are attractive candidates for future nanoelectronics. Ultra-thin nanowires with diameters of 20 to 30 nm are essentially one-dimensional (ID) for moderate electron number, because only one radial subband is occupied. Low-temperature scanning gate microscopy is especially well suited for improving our understanding of nanowires in order to optimize the construction of nanowire systems. We use a home-built liquid-He cooled scanning gate microscope (SGM) to probe and manipulate electrons beneath the surface of devices. The SGM's conductance images are obtained by scanning the charged SGM tip above the sample and recording the change in conductance through the device as a function of tip position. We present simulations of extracting the amplitude of the 1D electron wavefunction along the length of the quantum dot in an ultra-thin InAs/InP heterostructure nanowire (diameter = 30 nm) using a SGM. A weakly perturbing SGM tip slightly dents the electron wavefunction inside the quantum dot, and we propose measuring the change in energy of the dot due to the perturbation as a function of tip position. By measuring the change in energy of the dot and by knowing the form of the tip potential, the amplitude of the wavefunction can be found. This extraction technique could serve as a powerful tool to improve our understanding of electron behavior in quasi-1 D systems. We have used our SGM to image the conductance through an ultra-thin (diameter ˜ 30 nm) 1nAs nanowire with two InP barriers. Our imaging technique provides detailed information regarding the position and flow of electrons in the nanowire. We demonstrate that the charged SPM tip's position or voltage can be used to control the number of electrons on the quantum dots. We spatially locate three quantum dots in series along the length of the ultra-thin nanowire. Using energy level spectroscopy and the

  19. Synthesis and Characterization of Glassy Carbon Nanowires

    Directory of Open Access Journals (Sweden)

    C. M. Lentz

    2011-01-01

    Full Text Available The advent of carbon-based micro- and nanoelectromechanical systems has revived the interest in glassy carbon, whose properties are relatively unknown at lower dimensions. In this paper, electrical conductivity of individual glassy carbon nanowires was measured as a function of microstructure (controlled by heat treatment temperature and ambient temperature. The semiconducting nanowires with average diameter of 150 nm were synthesized from polyfurfuryl alcohol precursors and characterized using transmission electron and Raman microscopy. DC electrical measurements made at 90 K to 450 K show very strong dependence of temperature, following mixed modes of activation energy and hopping-based conduction.

  20. Magnetic logic using nanowires with perpendicular anisotropy.

    Science.gov (United States)

    Jaworowicz, J; Vernier, N; Ferré, J; Maziewski, A; Stanescu, D; Ravelosona, D; Jacqueline, A S; Chappert, C; Rodmacq, B; Diény, B

    2009-05-27

    In addition to a storage function through the magnetization of nanowires, domain wall propagation can be used to trigger magnetic logic functions. Here, we present a new way to realize a pure magnetic logic operation by using magnetic nanowires with perpendicular anisotropy. Emphasis is given on the generation of the logic function 'NOT' that is based on the dipolar interaction between two neighbouring magnetic wires, which favours the creation of a domain wall. This concept has been validated on several prototypes and the results fit well with the expectations.

  1. Titanium catalyzed silicon nanowires and nanoplatelets

    Directory of Open Access Journals (Sweden)

    Mohammad A. U. Usman

    2013-03-01

    Full Text Available Silicon nanowires, nanoplatelets, and other morphologies resulted from silicon growth catalyzed by thin titanium layers. The nanowires have diameters down to 5 nm and lengths to tens of micrometers. The two-dimensional platelets, in some instances with filigreed, snow flake-like shapes, had thicknesses down to the 10 nm scale and spans to several micrometers. These platelets grew in a narrow temperature range around 900 celsius, apparently representing a new silicon crystallite morphology at this length scale. We surmise that the platelets grow with a faceted dendritic mechanism known for larger crystals nucleated by titanium silicide catalyst islands.

  2. Nanowires and nanostructures fabrication using template methods

    DEFF Research Database (Denmark)

    Mátéfi-Tempfli, Stefan; Mátéfi-Tempfli, M.; Vlad, A.

    2009-01-01

    One of the great challenges of today is to find reliable techniques for the fabrication of nanomaterials and nanostructures. Methods based on template synthesis and on self organization are the most promising due to their easiness and low cost. This paper focuses on the electrochemical synthesis ...... of nanowires and nanostructures using nanoporous host materials such as supported anodic aluminum considering it as a key template for nanowires based devices. New ways are opened for applications by combining such template synthesis methods with nanolithographic techniques....

  3. Silicon nanowires for photovoltaic solar energy conversion.

    Science.gov (United States)

    Peng, Kui-Qing; Lee, Shuit-Tong

    2011-01-11

    Semiconductor nanowires are attracting intense interest as a promising material for solar energy conversion for the new-generation photovoltaic (PV) technology. In particular, silicon nanowires (SiNWs) are under active investigation for PV applications because they offer novel approaches for solar-to-electric energy conversion leading to high-efficiency devices via simple manufacturing. This article reviews the recent developments in the utilization of SiNWs for PV applications, the relationship between SiNW-based PV device structure and performance, and the challenges to obtaining high-performance cost-effective solar cells.

  4. An optically guided microdevice comprising a nanowire

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention relates to a microdevice (100) for emitting electromagnetic radiation onto an associated object. Simultaneous non-contact spatial control over the microdevice in terms of translational movement in three dimensions, and rotational movement around at least two axes, preferably...... three axes, is possible. The microdevice further comprises a nanowire (150) being arranged for emitting electromagnetic radiation onto said associated object. This is advantageous for obtaining better spatial control of the microdevice comprising the nanowire, and this enables that light could more...

  5. Enhanced magnetotransport in nanopatterned manganite nanowires.

    Science.gov (United States)

    Marín, Lorena; Morellón, Luis; Algarabel, Pedro A; Rodríguez, Luis A; Magén, César; De Teresa, José M; Ibarra, Manuel R

    2014-02-12

    We have combined optical and focused ion beam lithographies to produce large aspect-ratio (length-to-width >300) single-crystal nanowires of La2/3Ca1/3MnO3 that preserve their functional properties. Remarkably, an enhanced magnetoresistance value of 34% in an applied magnetic field of 0.1 T in the narrowest 150 nm nanowire is obtained. The strain release at the edges together with a destabilization of the insulating regions is proposed to account for this behavior. This opens new strategies to implement these structures in functional spintronic devices.

  6. Smooth Nanowire/Polymer Composite Transparent Electrodes

    KAUST Repository

    Gaynor, Whitney

    2011-04-29

    Smooth composite transparent electrodes are fabricated via lamination of silver nanowires into the polymer poly-(4,3-ethylene dioxythiophene): poly(styrene-sulfonate) (PEDOT:PSS). The surface roughness is dramatically reduced compared to bare nanowires. High-efficiency P3HT:PCBM organic photovoltaic cells can be fabricated using these composites, reproducing the performance of cells on indium tin oxide (ITO) on glass and improving the performance of cells on ITO on plastic. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Smooth nanowire/polymer composite transparent electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Gaynor, Whitney; McGehee, Michael D. [Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305 (United States); Burkhard, George F. [Department of Applied Physics, Stanford University, Stanford, CA 94305 (United States); Peumans, Peter [Department of Electrical Engineering, Stanford University, Stanford, CA 94305 (United States)

    2011-07-12

    Smooth composite transparent electrodes are fabricated via lamination of silver nanowires into the polymer poly-(4,3-ethylene dioxythiophene):poly(styrene-sulfonate) (PEDOT:PSS). The surface roughness is dramatically reduced compared to bare nanowires. High-efficiency P3HT:PCBM organic photovoltaic cells can be fabricated using these composites, reproducing the performance of cells on indium tin oxide (ITO) on glass and improving the performance of cells on ITO on plastic. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  8. Synchrotron characterization of functional tin dioxide nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Domashevskaya, E. P., E-mail: ftt@phys.vsu.ru; Chuvenkova, O. A.; Turishchev, S. Yu. [Voronezh State University, Voronezh (Russian Federation)

    2015-12-31

    Wire-like crystals of tin dioxide were synthesized by a gas-transport technique. The wires, of mainly nanometric diameters, were characterized by spectroscopy and microscopy techniques with the use of highly brilliant and intense synchrotron radiation. We studied the influence of the surface chemical state and the oxygen vacancies on the atomic and electronic structure of the nanowires. The surface of the nanowires is covered by a few nanometers of tin suboxides. The lack of oxygen over the surface layers leads to specific sub-zone formation in a gap, as shown by synchrotron studies.

  9. Photon-triggered nanowire transistors

    Science.gov (United States)

    Kim, Jungkil; Lee, Hoo-Cheol; Kim, Kyoung-Ho; Hwang, Min-Soo; Park, Jin-Sung; Lee, Jung Min; So, Jae-Pil; Choi, Jae-Hyuck; Kwon, Soon-Hong; Barrelet, Carl J.; Park, Hong-Gyu

    2017-10-01

    Photon-triggered electronic circuits have been a long-standing goal of photonics. Recent demonstrations include either all-optical transistors in which photons control other photons or phototransistors with the gate response tuned or enhanced by photons. However, only a few studies report on devices in which electronic currents are optically switched and amplified without an electrical gate. Here we show photon-triggered nanowire (NW) transistors, photon-triggered NW logic gates and a single NW photodetection system. NWs are synthesized with long crystalline silicon (CSi) segments connected by short porous silicon (PSi) segments. In a fabricated device, the electrical contacts on both ends of the NW are connected to a single PSi segment in the middle. Exposing the PSi segment to light triggers a current in the NW with a high on/off ratio of >8 × 106. A device that contains two PSi segments along the NW can be triggered using two independent optical input signals. Using localized pump lasers, we demonstrate photon-triggered logic gates including AND, OR and NAND gates. A photon-triggered NW transistor of diameter 25 nm with a single 100 nm PSi segment requires less than 300 pW of power. Furthermore, we take advantage of the high photosensitivity and fabricate a submicrometre-resolution photodetection system. Photon-triggered transistors offer a new venue towards multifunctional device applications such as programmable logic elements and ultrasensitive photodetectors.

  10. Synthesis and characterization of WO3 nanowires and metal nanoparticle-WO3 nanowire composites

    Science.gov (United States)

    Szabó, Mária; Pusztai, Péter; Leino, Anne-Riikka; Kordás, Krisztián; Kónya, Zoltán; Kukovecz, Ákos

    2013-07-01

    Tungsten-trioxide nanowire bundles were prepared using a simple hydrothermal method. Sodium-tungstate was used as precursor and sodium-sulfate as structure directing agent. All the reflections of the X-ray diffractogram of the synthesized wires belong to the hexagonal phase of the tungsten trioxide. The nanowires were successfully decorated with metal nanoparticles by wet impregnation. The TEM investigation showed that using different metal precursors resulted in different particle sizes and coverage on the surface.

  11. Piezo and photoelectric coupled nanogenerator using CdSe quantum dots incorporated ZnO nanowires in ITO/ZnO NW/Si structure

    Energy Technology Data Exchange (ETDEWEB)

    Kathalingam, A.; Valanarasu, S.; Senthilkumar, V. [Millimeter-wave INnovation Technology Research Center (MINT), Dongguk University, Seoul 100-715 (Korea, Republic of); Rhee, Jin-Koo, E-mail: jkrhee@dongguk.edu [Millimeter-wave INnovation Technology Research Center (MINT), Dongguk University, Seoul 100-715 (Korea, Republic of)

    2013-02-15

    We report the fabrication of ITO/n-ZnO NW/p-Si sandwiched structure and its photoelectric and piezoelectric conversion properties. This hybrid cell was designed to harvest simultaneously both solar and mechanical energies. ZnO nanowires used in the work were grown on p-type Si substrates employing seed mediated low-temperature aqueous solution method. The synthesized ZnO nanowires were characterized by XRD, SEM and EDX characterization for their structural and morphological evaluation. The as-grown ZnO nanowires showed good crystallinity with c-axis preferable orientation. Free ZnO nanowires and CdSe quantum dots were also incorporated with the vertically grown nanowires and their response in harvesting optical and mechanical energies were investigated. The piezoelectric and photoelectric coupled effects of a ZnO nanowire device in the simultaneous conversion of both optical and mechanical energies have been studied for the first time with the goal of designing piezoelectric and photoelectric hybrid nanogenerator. This presented ITO/n-ZnO NW/p-Si heterojunction architecture is envisaged as a potentially valuable candidate for the next generation energy harvesting devices. Graphene-coated ITO was also used and its response was studied. - Highlights: ► Fabricated an unique sandwich type ITO/n-ZnO NW/p-Si nanogenerator. ► Simultaneous harvesting of both light and mechanical energy achieved. ► CdSe incorporation with ZnO nanowires increased the performance of the device. ► First report integrated both nanogenerator and solar cell in a same surface. ► Incorporating nanoantenna this structure can harvest light, heat and sound.

  12. Strong light absorption capability directed by structured profile of vertical Si nanowires

    Science.gov (United States)

    Chaliyawala, Harsh A.; Ray, Abhijit; Pati, Ranjan K.; Mukhopadhyay, Indrajit

    2017-11-01

    Si nanowire arrays (SiNWAs) with random fractal geometry was fabricated using fast, mask-less, non-lithographic and facile approach by incorporating metal assisted electroless etching of n-type Si (111) substrates. The FESEM images demonstrate the formation of nano-porous surfaces that provide effective path for the incoming light to get trapped into the cavity of nanowires. The length of NWs increases from ∼1 to 10 μm with increase in the etching time having a diameter in the range of ∼25-82 nm. A transformation from zero to first order kinetics after a prolonged etching has been determined. The synthesized SiNWAs show high light trapping properties, including a maximum photon absorption across the entire visible and near IR range below the band gap of Si. The SiNWAs etched for 15 min exhibit extremely low specular and total reflectance of ∼0.2% and 4.5%, respectively over a broadband of wavelength. The reduction in the reflection loss is accompanied with the gradient of refractive index from air to Si substrate as well as due to the sub-wavelength structures, which manifests the light scattering effect. The COMSOL multiphysics simulation has been performed to study the high broadband light absorption capability in terms of the strong localized light field confinement by varying the length of the nanowire. Moreover, the SiNWs induces the dewetting ability at the solid/liquid interface and enhances the superhydrophobicity. Furthermore, a maximum length scale of 100-200 nm manifests a strong heterogeneity along the planar section of the surface of SiNWs. The study thus provides an insight on the light propagation into the random fractal geometries of Si nanowires. These outstanding properties should contribute to the structural optimization of various optoelectronic and photonic devices.

  13. Photoinduced orientation in natural rubber

    Science.gov (United States)

    de Souza, Nara C.; Cavalheri, Adriana S.; Brito, Jackeline B.; Job, Aldo E.; Oliveira, Osvaldo N.; Giacometti, José A.; Silva, Josmary R.

    2012-04-01

    Azobenzene molecules and their derivatives have been widely investigated for their potential applications in optical and electrooptical devices. We have prepared a new guest-host system from natural rubber (NR) impregnated with azobenzene derivative Sudan Red B (SRB). The effects of stretching and immersion time on photoinduced orientation were investigated by birefringence signal measurements. We have found that the molecular orientation increase when the samples are stretched and decrease with the increase of immersion time. The first behavior was explained by using the random coil model and the latter was attributed to increase of the aggregation of SRB into NR matrix.

  14. ZnO dense nanowire array on a film structure in a single crystal domain texture for optical and photoelectrochemical applications

    Science.gov (United States)

    Zhong, Miao; Sato, Yukio; Kurniawan, Mario; Apostoluk, Aleksandra; Masenelli, Bruno; Maeda, Etsuo; Ikuhara, Yuichi; Delaunay, Jean-Jacques

    2012-12-01

    A single crystal domain texture quality (a unique in-plane and out-of-plane crystalline orientation over a large area) ZnO nanostructure of a dense nanowire array on a thick film has been homogeneously synthesized on a-plane sapphire substrates over large areas through a one-step chemical vapor deposition (CVD) process. The growth mechanism is clarified: a single crystal [0\\bar {2}1] oriented ZnAl2O4 buffer layer was formed at the ZnO film and the a-plane sapphire substrate interface via a diffusion reaction process during the CVD process, providing improved epitaxial conditions that enable the synthesis of the high crystalline quality ZnO nanowire array on a film structure. The high optoelectronic quality of the ZnO nanowire array on a film sample is evidenced by the free exitonic emissions in the low-temperature photoluminescence spectroscopy. A carrier density of ˜1017 cm-3 with an n-type conductivity of the ZnO nanowire array on a film sample is obtained by electrochemical impedance analysis. Finally, the ZnO nanowire array on a film sample is demonstrated to be an ideal template for a further synthesis of a single crystal quality ZnO-ZnGa2O4 core-shell nanowire array on a film structure. The fabricated ZnO-ZnGa2O4 sample revealed an enhanced anticorrosive ability and photoelectrochemical performance when used as a photoanode in a photoelectrochemical water splitting application.

  15. Plasmonic engineering of metal-oxide nanowire heterojunctions in integrated nanowire rectification units

    Science.gov (United States)

    Lin, Luchan; Zou, Guisheng; Liu, Lei; Duley, Walt W.; Zhou, Y. Norman

    2016-05-01

    We show that irradiation with femtosecond laser pulses can produce robust nanowire heterojunctions in coupled non-wetting metal-oxide Ag-TiO2 structures. Simulations indicate that joining arises from the effect of strong plasmonic localization in the region of the junction. Strong electric field effects occur in both Ag and TiO2 resulting in the modification of both surfaces and an increase in wettability of TiO2, facilitating the interconnection of Ag and TiO2 nanowires. Irradiation leads to the creation of a thin layer of highly defected TiO2 in the contact region between the Ag and TiO2 nanowires. The presence of this layer allows the formation of a heterojunction and offers the possibility of engineering the electronic characteristics of interfacial structures. Rectifying junctions with single and bipolar properties have been generated in Ag-TiO2 nanowire circuits incorporating asymmetrical and symmetrical interfacial structures, respectively. This fabrication technique should be applicable for the interconnection of other heterogeneous metal-oxide nanowire components and demonstrates that femtosecond laser irradiation enables interfacial engineering for electronic applications of integrated nanowire structures.

  16. Study of spin dynamics and damping on the magnetic nanowire arrays with various nanowire widths

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Jaehun [Department of Physics, Inha University, Incheon, 402-751 (Korea, Republic of); Fujii, Yuya; Konioshi, Katsunori [Graduate School of Engineering Science, Osaka University, Toyonaka, Osaka 560-8531 (Japan); Yoon, Jungbum [Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576 (Singapore); Kim, Nam-Hui; Jung, Jinyong [Department of Physics, Inha University, Incheon, 402-751 (Korea, Republic of); Miwa, Shinji [Graduate School of Engineering Science, Osaka University, Toyonaka, Osaka 560-8531 (Japan); Jung, Myung-Hwa [Department of Physics, Sogang University, Seoul, 121-742 (Korea, Republic of); Suzuki, Yoshishige [Graduate School of Engineering Science, Osaka University, Toyonaka, Osaka 560-8531 (Japan); You, Chun-Yeol, E-mail: cyyou@inha.ac.kr [Department of Physics, Inha University, Incheon, 402-751 (Korea, Republic of)

    2016-07-01

    We investigate the spin dynamics including Gilbert damping in the ferromagnetic nanowire arrays. We have measured the ferromagnetic resonance of ferromagnetic nanowire arrays using vector-network analyzer ferromagnetic resonance (VNA-FMR) and analyzed the results with the micromagnetic simulations. We find excellent agreement between the experimental VNA-FMR spectra and micromagnetic simulations result for various applied magnetic fields. We find that the same tendency of the demagnetization factor for longitudinal and transverse conditions, N{sub z} (N{sub y}) increases (decreases) as increasing the nanowire width in the micromagnetic simulations while N{sub x} is almost zero value in transverse case. We also find that the Gilbert damping constant increases from 0.018 to 0.051 as the increasing nanowire width for the transverse case, while it is almost constant as 0.021 for the longitudinal case. - Highlights: • We investigate the spin dynamic properties in the ferromagnetic nanowire arrays. • The demagnetization factors have similar tendency with the prism geometry results. • The Gilbert damping constant is increased from 0.018 to 0.051 as the increasing nanowire width for the transverse. • The Gilbert damping constant is almost constant as 0.021 for the longitudinal case.

  17. Plasmonic engineering of metal-oxide nanowire heterojunctions in integrated nanowire rectification units

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Luchan; Zhou, Y. Norman, E-mail: liulei@tsinghua.edu.cn, E-mail: nzhou@uwaterloo.ca [Department of Mechanical Engineering, State Key Laboratory of Tribology, Tsinghua University, Beijing 100084 (China); Centre for Advanced Materials Joining, University of Waterloo, Waterloo, Ontario N2L 3G1 (Canada); Zou, Guisheng; Liu, Lei, E-mail: liulei@tsinghua.edu.cn, E-mail: nzhou@uwaterloo.ca [Department of Mechanical Engineering, State Key Laboratory of Tribology, Tsinghua University, Beijing 100084 (China); Duley, Walt W. [Centre for Advanced Materials Joining, University of Waterloo, Waterloo, Ontario N2L 3G1 (Canada); Department of Physics and Astronomy, University of Waterloo, Waterloo, Ontario N2L 3G1 (Canada)

    2016-05-16

    We show that irradiation with femtosecond laser pulses can produce robust nanowire heterojunctions in coupled non-wetting metal-oxide Ag-TiO{sub 2} structures. Simulations indicate that joining arises from the effect of strong plasmonic localization in the region of the junction. Strong electric field effects occur in both Ag and TiO{sub 2} resulting in the modification of both surfaces and an increase in wettability of TiO{sub 2}, facilitating the interconnection of Ag and TiO{sub 2} nanowires. Irradiation leads to the creation of a thin layer of highly defected TiO{sub 2} in the contact region between the Ag and TiO{sub 2} nanowires. The presence of this layer allows the formation of a heterojunction and offers the possibility of engineering the electronic characteristics of interfacial structures. Rectifying junctions with single and bipolar properties have been generated in Ag-TiO{sub 2} nanowire circuits incorporating asymmetrical and symmetrical interfacial structures, respectively. This fabrication technique should be applicable for the interconnection of other heterogeneous metal-oxide nanowire components and demonstrates that femtosecond laser irradiation enables interfacial engineering for electronic applications of integrated nanowire structures.

  18. Size Effect and Deformation Mechanism in Twinned Copper Nanowires

    Directory of Open Access Journals (Sweden)

    Jiapeng Sun

    2017-10-01

    Full Text Available Molecular dynamics simulations were performed to demonstrate the synergistic effects of the extrinsic size (nanowire length and intrinsic size (twin boundary spacing on the failure manner, yield strength, ductility and deformation mechanism of the twinned nanowires containing high density coherent twin boundaries CTBs paralleled to the nanowires’ axis. The twinned nanowires show an intense extrinsic size effect, i.e., shorter is stronger and more ductile, and an intense intrinsic size effect, i.e., thinner is stronger. Notably, the strengthening effect degradation of CTBs in the twinned nanowires is observed with an increase in nanowire length: remarkable strengthening effect can be obtained for the short nanowires, but the strengthening effect becomes less pronounced for the long nanowires. The twinned nanowires fail via a ductile manner or via a brittle manner depending on the synergistic effect of the nanowire length and twin boundary spacing. By atomic-level observation of the plastic deformation, we found that the emission of a trailing 30° partial from the free surface controls the yield behavior of the twinned nanowires. We also found that the special zigzag extended dislocations are formed by the dislocation–CTBs interactions, and propagate to sustain the plastic deformation.

  19. Broadband Nonlinear Signal Processing in Silicon Nanowires

    DEFF Research Database (Denmark)

    Yvind, Kresten; Pu, Minhao; Hvam, Jørn Märcher

    The fast non-linearity of silicon allows Tbit/s optical signal processing. By choosing suitable dimensions of silicon nanowires their dispersion can be tailored to ensure a high nonlinearity at power levels low enough to avoid significant two-photon abso We have fabricated low insertion...

  20. Superenhancers: novel opportunities for nanowire optoelectronics.

    Science.gov (United States)

    Khudiyev, Tural; Bayindir, Mehmet

    2014-12-16

    Nanowires play a crucial role in the development of new generation optoelectronic devices ranging from photovoltaics to photodetectors, as these designs capitalize on the low material usage, utilize leaky-mode optical resonances and possess high conversion efficiencies associated with nanowire geometry. However, their current schemes lack sufficient absorption capacity demanded for their practical applicability, and more efficient materials cannot find widespread usage in these designs due to their rarity and cost. Here we suggest a novel and versatile nanoconcentrator scheme utilizing unique optical features of non-resonant Mie (NRM) scattering regime associated with low-index structures. The scattering regime is highly compatible with resonant Mie absorption effect taking place in nanowire absorbers. This technique in its optimized forms can provide up to 1500% total absorption enhancement, 400-fold material save and is suitable for large-area applications with significant area preservation compared to thin-film of same materials. Proposed superenhancer concept with its exceptional features such as broadband absorption enhancement, polarization immunity and material-independent manner paves the way for development of efficient nanowire photosensors or solar thermophotovoltaic devices and presents novel design opportunities for self-powered nanosystems.

  1. Visualizing hybridized quantum plasmons in coupled nanowires

    DEFF Research Database (Denmark)

    Andersen, Kirsten; Jensen, Kristian Lund; Mortensen, N. Asger

    2013-01-01

    We present full quantum-mechanical calculations of the hybridized plasmon modes of two nanowires at small separation, providing real-space visualization of the modes in the transition from the classical to the quantum tunneling regime. The plasmon modes are obtained as certain eigenfunctions...

  2. Direct observation of nanowire growth and decomposition

    DEFF Research Database (Denmark)

    Rackauskas, Simas; Shandakov, Sergey D; Jiang, Hua

    2017-01-01

    knowledge, so far this has been only postulated, but never observed at the atomic level. By means of in situ environmental transmission electron microscopy we monitored and examined the atomic layer transformation at the conditions of the crystal growth and its decomposition using CuO nanowires selected...

  3. Silicon Nanowire Field-effect Chemical Sensor

    NARCIS (Netherlands)

    Chen, S.

    2011-01-01

    This thesis describes the work that has been done on the project “Design and optimization of silicon nanowire for chemical sensing‿, including Si-NW fabrication, electrical/electrochemical modeling, the application as ISFET, and the build-up of Si- NW/LOC system for automatic sample delivery. A

  4. Surround-gated vertical nanowire quantum dots

    NARCIS (Netherlands)

    Van Weert, M.H.M.; Den Heijer, M.; Van Kouwen, M.P.; Algra, R.E.; Bakkers, E.P.A.M.; Kouwenhoven, L.P.; Zwiller, V.

    2010-01-01

    We report voltage dependent photoluminescence experiments on single indium arsenide phosphide (InAsP) quantum dots embedded in vertical surround-gated indium phosphide (InP) nanowires. We show that by tuning the gate voltage, we can access different quantum dot charge states. We study the

  5. A Semiconductor Nanowire-Based Superconducting Qubit

    DEFF Research Database (Denmark)

    Larsen, T. W.; Petersson, K. D.; Kuemmeth, F.

    2015-01-01

    We introduce a hybrid qubit based on a semiconductor nanowire with an epitaxially grown superconductor layer. Josephson energy of the transmon-like device ("gatemon") is controlled by an electrostatic gate that depletes carriers in a semiconducting weak link region. Strong coupling to an on...

  6. Krypton ion implantation effect on selenium nanowires

    Science.gov (United States)

    Panchal, Suresh; Chauhan, R. P.

    2017-08-01

    Among the rapidly progressing interdisciplinary areas of physics, chemistry, material science etc. ion induced modifications of materials is one such evolving field. It has been realized in recent years that a material, in the form of an accelerated ion beam, embedded into a target specimen offers a most productive tool for transforming its properties in a controlled manner. In semiconductors particularly, where the transport behavior is determined by very small concentrations of certain impurities, implantation of ions may bring considerable changes. The present work is based on the study of the effect of krypton ion implantation on selenium nanowires. Selenium nanowires of diameter 80 nm were synthesized by template assisted electro deposition technique. Implantation of krypton ions was done at Inter University Accelerator Centre (IUAC), New Delhi, India. The effect of implantation on structural, electrical and optical properties of selenium nanowires was investigated. XRD analysis of pristine and implanted nanowires shows no shifting in the peak position but there is a variation in the relative intensity with fluence. UV-Visible spectroscopy shows the decrease in the optical band gap with fluence. PL spectra showed emission peak at higher wavelength. A substantial rise in the current was observed from I-V measurements, after implantation and with the increase in fluence. The increase in current conduction may be due to the increase in the current carriers.

  7. Optical Properties of PbSe Nanowires

    Science.gov (United States)

    Clifton, E.; Tischler, J. G.; Foos, E. E.; Zega, T. J.; Stroud, R. M.; Boercker, J. E.; Cress, C. D.; Efros, Al L.; Erwin, S. C.

    2010-03-01

    Colloidal PbSe nanocrystals show potential as a material for high efficiency photovoltaics, for two reasons: (1) tunability of the band gap through a wide range in the near infrared, and (2) efficient multiexciton generation. The charge mobility of PbSe NCs is relatively high compared to other nanocrystalline materials, but is still far from optimal. One possible way to increase the mobility is to use nanowires instead of nanocrystals. To this end we have synthesized high-aspect-ratio (>100) PbSe nanowires in solution. Here we investigate the optical properties of these nanowires using photoluminescence and transmission. We observe clear quantum confinement, and demonstrate that the bandgap can be tuned over the range required, ˜0.4eV, for photovoltaic applications [1]. Finally, we investigate the evolution of quantum confinement when going from 0D to 1D by comparing the optical properties of nanocrystals and nanowires. [1] Schaller et al., Nanoletters 6, 424(2006)

  8. Lasing in nanowires: Ab initio semiclassical model

    DEFF Research Database (Denmark)

    Bordo, Vladimir

    2013-01-01

    The semiclassical equations which describe lasing in nanowires are derived from first principles. Both the lasing threshold condition and the steady-state regime of operation are discussed. It is shown that the lasing is governed by the Fourier coefficients of the field susceptibility averaged ov...

  9. Quantum fluctuations of voltage in superconducting nanowires

    Science.gov (United States)

    Semenov, Andrew G.; Zaikin, Andrei D.

    2017-07-01

    At low temperatures non-equilibrium voltage fluctuations can be generated in current-biased superconducting nanowires due to proliferation of quantum phase slips (QPS) or, equivalently, due to quantum tunneling of magnetic flux quanta across the wire. In this paper we review and further extend recent theoretical results related to this phenomenon. Employing the phase-charge duality arguments combined with Keldysh path integral technique we analyze such fluctuations within the two-point and four-point measurement schemes demonstrating that voltage noise detected in such nanowires in general depends on the particular measurement setup. In the low frequency limit we evaluate all cumulants of the voltage operator which turn out to obey Poisson statistics and exhibit a power law dependence on the external bias. We also specifically address a non-trivial frequency dependence of quantum shot noise power spectrum SΩ for both longer and shorter superconducting nanowires. In particular, we demonstrate that SΩ decreases with increasing frequency Ω and vanishes beyond a threshold value of Ω at T → 0. Furthermore, we predict that SΩ may depend non-monotonously on temperature due to quantum coherent nature of QPS noise. The results of our theoretical analysis can be directly tested in future experiments with superconducting nanowires.

  10. Tracking random walk of individual domain walls in cylindrical nanomagnets with resistance noise.

    Science.gov (United States)

    Singh, Amrita; Mukhopadhyay, Soumik; Ghosh, Arindam

    2010-08-06

    The stochasticity of domain-wall (DW) motion in magnetic nanowires has been probed by measuring slow fluctuations, or noise, in electrical resistance at small magnetic fields. By controlled injection of DWs into isolated cylindrical nanowires of nickel, we have been able to track the motion of the DWs between the electrical leads by discrete steps in the resistance. Closer inspection of the time dependence of noise reveals a diffusive random walk of the DWs with a universal kinetic exponent. Our experiments outline a method with which electrical resistance is able to detect the kinetic state of the DWs inside the nanowires, which can be useful in DW-based memory designs.

  11. Electrochemical synthesis of CORE-shell magnetic nanowires

    KAUST Repository

    Ovejero, Jesús G.

    2015-04-16

    (Fe, Ni, CoFe) @ Au core-shell magnetic nanowires have been synthesized by optimized two-step potentiostatic electrodeposition inside self-assembled nanopores of anodic aluminium templates. The optimal electrochemical parameters (e.g., potential) have been firstly determined for the growth of continuous Au nanotubes at the inner wall of pores. Then, a magnetic core was synthesized inside the Au shells under suitable electrochemical conditions for a wide spectrum of single elements and alloy compositions (e.g., Fe, Ni and CoFe alloys). Novel opportunities offered by such nanowires are discussed particularly the magnetic behavior of (Fe, Ni, CoFe) @ Au core-shell nanowires was tested and compared with that of bare TM nanowires. These core-shell nanowires can be released from the template so, opening novel opportunities for biofunctionalization of individual nanowires.

  12. Electroless Fabrication of Cobalt Alloys Nanowires within Alumina Template

    Directory of Open Access Journals (Sweden)

    Nazila Dadvand

    2007-01-01

    Full Text Available A new method of nanowire fabrication based on electroless deposition process is described. The method is novel compared to the current electroless procedure used in making nanowires as it involves growing nanowires from the bottom up. The length of the nanowires was controlled at will simply by adjusting the deposition time. The nanowires were fabricated within the nanopores of an alumina template. It was accomplished by coating one side of the template by a thin layer of palladium in order to activate the electroless deposition within the nanopores from bottom up. However, prior to electroless deposition process, the template was pretreated with a suitable wetting agent in order to facilitate the penetration of the plating solution through the pores. As well, the electroless deposition process combined with oblique metal evaporation process within a prestructured silicon wafer was used in order to fabricate long nanowires along one side of the grooves within the wafer.

  13. Theory of second-harmonic generation in silica nanowires

    DEFF Research Database (Denmark)

    Lægsgaard, Jesper

    2010-01-01

    The possibility of second-harmonic generation based on surface dipole and bulk multipole nonlinearities in silica nanowires is investigated numerically. Both circular and microstructured nanowires are considered. Phase matching is provided by propagating the pump field in the fundamental mode......, while generating the second harmonic in one of the modes of the LP11 multiplet. This is shown to work in both circular and microstructured nanowires, although only one of the LP11 modes can be phase-matched in the microstructure. The prospect of obtaining large conversion efficiencies in silica......-based nanowires is critically discussed, based on simulations of second-harmonic generation in nanowires with a fluctuating phase-matching wavelength. It is concluded that efficient wavelength conversion will either require strong improvements in the nanowire uniformity, or an increase of the second...

  14. Properties of hexagonally ordered CoFe -- alloy nanowire arrays

    Science.gov (United States)

    Fodor, Petru; Tsoi, Georgy; Wenger, Lowell

    2007-03-01

    The structural and magnetic properties of an array of micron-long Co0.45Fe0.55 alloy nanowires with diameters ranging from 12 to 52 nm electrodeposited in porous anodic alumina templates have been studied using X-ray diffractometry, scanning electron microscopy, and magnetization measurements. The nanowires are found to crystallize in a body-centered-cubic (bcc) structure along the (110) axis for all diameters studied. The magnetization curves indicate a highly anisotropic behavior with the easy axis along the nanowire axis and a coercivity of 3500 Oe at room temperature. Results from the magnetization hysteresis and magnetic relaxation measurements suggest that the magnetization reversal takes place through localized nucleation in volumes smaller than the physical volume of the nanowires. The localization of the nucleation combined with the cooperative effects arising from magnetostatic interactions between the nanowires, limits the coercivity of the nanowire arrays.

  15. Increasing the efficiency of polymer solar cells by silicon nanowires.

    Science.gov (United States)

    Eisenhawer, B; Sensfuss, S; Sivakov, V; Pietsch, M; Andrä, G; Falk, F

    2011-08-05

    Silicon nanowires have been introduced into P3HT:[60]PCBM solar cells, resulting in hybrid organic/inorganic solar cells. A cell efficiency of 4.2% has been achieved, which is a relative improvement of 10% compared to a reference cell produced without nanowires. This increase in cell performance is possibly due to an enhancement of the electron transport properties imposed by the silicon nanowires. In this paper, we present a novel approach for introducing the nanowires by mixing them into the polymer blend and subsequently coating the polymer/nanowire blend onto a substrate. This new onset may represent a viable pathway to producing nanowire-enhanced polymer solar cells in a reel to reel process.

  16. Vertical nanowire probes for intracellular signaling of living cells

    Science.gov (United States)

    Lee, Ki-Young; Kim, Ilsoo; Kim, So-Eun; Jeong, Du-Won; Kim, Ju-Jin; Rhim, Hyewhon; Ahn, Jae-Pyeong; Park, Seung-Han; Choi, Heon-Jin

    2014-02-01

    The single living cell action potential was measured in an intracellular mode by using a vertical nanoelectrode. For intracellular interfacing, Si nanowires were vertically grown in a controlled manner, and optimum conditions, such as diameter, length, and nanowire density, were determined by culturing cells on the nanowires. Vertical nanowire probes were then fabricated with a complimentary metal-oxide-semiconductor (CMOS) process including sequential deposition of the passivation and electrode layers on the nanowires, and a subsequent partial etching process. The fabricated nanowire probes had an approximately 60-nm diameter and were intracellular. These probes interfaced with a GH3 cell and measured the spontaneous action potential. It successfully measured the action potential, which rapidly reached a steady state with average peak amplitude of approximately 10 mV, duration of approximately 140 ms, and period of 0.9 Hz.

  17. Synthetic Strategies and Applications of GaN Nanowires

    Directory of Open Access Journals (Sweden)

    Guoquan Suo

    2014-01-01

    Full Text Available GaN is an important III-V semiconductor material with a direct band gap of 3.4 eV at 300 K. The wide direct band gap makes GaN an attractive material for various applications. GaN nanowires have demonstrated significant potential as fundamental building blocks for nanoelectronic and nanophotonic devices and also offer substantial promise for integrated nanosystems. In this paper, we provide a comprehensive review on the general synthetic strategies, characterizations, and applications of GaN nanowires. We first summarize several growth techniques of GaN nanowires. Subsequently, we discuss mechanisms involved to generate GaN nanowires from different synthetic schemes and conditions. Then we review some characterization methods of GaN nanowires. Finally, several kinds of main applications of GaN nanowires are discussed.

  18. Physical properties of annealed ZnO nanowire/CuSCN heterojunctions for self-powered UV photodetectors.

    Science.gov (United States)

    Garnier, Jérôme; Parize, Romain; Appert, Estelle; Chaix-Pluchery, Odette; Kaminski-Cachopo, Anne; Consonni, Vincent

    2015-03-18

    The low-cost fabrication of ZnO nanowire/CuSCN heterojunctions is demonstrated by combining chemical bath deposition with impregnation techniques. The ZnO nanowire arrays are completely filled by the CuSCN layer from their bottoms to their tops. The CuSCN layer is formed of columnar grains that are strongly oriented along the [003] direction owing to the polymeric form of the β-rhombohedral crystalline phase. Importantly, an annealing step is found essential in a fairly narrow range of low temperatures, not only for outgassing the solvent from the CuSCN layer, but also for reducing the density of interfacial defects. The resulting electrical properties of annealed ZnO nanowire/CuSCN heterojunctions are strongly improved: a maximum rectification ratio of 2644 at ±2 V is achieved following annealing at 150 °C under air atmosphere, which is related to a strong decrease in the reverse current density. Interestingly, the corresponding self-powered UV photodetectors exhibit a responsivity of 0.02 A/W at zero bias and at 370 nm with a UV-to-visible (370-500 nm) rejection ratio of 100 under an irradiance of 100 mW/cm(2). The UV selectivity at 370 nm can also be readily modulated by tuning the length of ZnO nanowires. Eventually, a significant photovoltaic effect is revealed for this type of heterojunctions, leading to an open circuit voltage of 37 mV and a short circuit current density of 51 μA/cm(2), which may be useful for the self-powering of the complete device. These findings show the underlying physical mechanisms at work in ZnO nanowire/CuSCN heterojunctions and reveal their high potential as self-powered UV photodetectors.

  19. Shape Evolution of Highly Lattice-Mismatched InN/InGaN Nanowire Heterostructures

    Science.gov (United States)

    Yan, Lifan; Hazari, Arnab; Bhattacharya, Pallab; Millunchick, Joanna M.

    2018-02-01

    We have investigated the structure and shape of GaN-based nanowires grown on (001) Si substrates for optoelectronic device applications. The nanowire heterostructures contained InN disks and In0.4Ga0.6N barrier layers in the active region. The resulting nanowire array comprised two differently shaped nanowires: shorter pencil-like nanowires and longer bead-like nanowires. The two different nanowire shapes evolve due to a variation in the In incorporation rate, which was faster for the bead-like nanowires. Both types of nanowires exhibited evidence of significant migration of both Ga and In during growth. Ga tended to diffuse away and down along the sidewalls, resulting in a Ga-rich shell for all nanowires. Despite the complex structure and great variability in the In composition, the optical properties of the nanowire arrays were very good, with strong luminescence peaking at ˜ 1.63 μm.

  20. Analysis of Critical Dimensions for Nanowire Core-Multishell Heterostructures

    OpenAIRE

    Yan, Xin; Fan, Shuyu; Zhang, Xia; Ren, Xiaomin

    2015-01-01

    Critical dimensions for nanowire core-multishell heterostructures are analyzed by using finite-element method based on the energy equilibrium criteria. Results show that the nanowire core-shell heterostructure can sufficiently reduce the strain in the shell and increase the critical shell thickness. The critical dimensions for the nanowire core-multishell heterostructure are determined by the stress fields generated at two heterointerfaces. For thin barrier, the critical dimensions decrease a...

  1. Smart Core-Shell Nanowire Architectures for Multifunctional Nanoscale Devices

    Science.gov (United States)

    2014-02-16

    in Orlando, FL USA. “Electronic landscapes near semiconductor nanowire heterostructures ”, Department of Chemistry, Washington University of...Core-Shell Nanowire Architectures for Multifunctional Nanoscale Devices W911NF-08-1-0067 611103 Jonathan E Spanier Drexel University Office of...Hadas Shtrikman, Patrick Kung, Tsachi Livneh, Jonathan E. Spanier. Direct Measurement of Band Edge Discontinuity in Individual Core–Shell Nanowires by

  2. Abrupt Schottky Junctions in Al/Ge Nanowire Heterostructures

    OpenAIRE

    Kral, S.; Zeiner, C.; St?ger-Pollach, M.; Bertagnolli, E.; Den Hertog, M.I.; Lopez-Haro, M.; Robin, E.; El Hajraoui, K.; Lugstein, A.

    2015-01-01

    In this Letter we report on the exploration of axial metal/semiconductor (Al/Ge) nanowire heterostructures with abrupt interfaces. The formation process is enabled by a thermal induced exchange reaction between the vapor?liquid?solid grown Ge nanowire and Al contact pads due to the substantially different diffusion behavior of Ge in Al and vice versa. Temperature-dependent I?V measurements revealed the metallic properties of the crystalline Al nanowire segments with a maximum current carrying...

  3. Solar heating of GaAs nanowire solar cells.

    Science.gov (United States)

    Wu, Shao-Hua; Povinelli, Michelle L

    2015-11-30

    We use a coupled thermal-optical approach to model the operating temperature rise in GaAs nanowire solar cells. We find that despite more highly concentrated light absorption and lower thermal conductivity, the overall temperature rise in a nanowire structure is no higher than in a planar structure. Moreover, coating the nanowires with a transparent polymer can increase the radiative cooling power by 2.2 times, lowering the operating temperature by nearly 7 K.

  4. Electronic homogeneity of nanowire heterostructure Light Emitting Diodes (LEDs)

    Science.gov (United States)

    Selcu, Camelia; May, Brelon J.; Sarwar, A. T. M. Golam; Myers, Roberto C.

    In addition to low defect densities and great tunability bandgap within a single heterostructure, the possibility of growing (Al, In,_) GaN nanowire heterostructure LEDs on different substrates while maintaining their high electronic and optical properties makes them very attractive. We investigated the electronic homogeneity of the (Al, In,_) GaN nanowire ensemble by acquiring current maps at certain applied biases using conductive AFM. By taken IVs on individual nanowires, we found that different wires have different turn on voltages and that some of the nanowires degrade due to the applied bias.

  5. Characterization of polymer nanowires fabricated using the nanoimprint method

    Science.gov (United States)

    Viphavakit, Charusluk; Atthi, Nithi; Boonruang, Sakoolkan; Themistos, Christos; Mohammed, Waleed S.; Kalli, Kyriacos; Rahman, B. M. Azizur; Komodromos, Michael

    2014-05-01

    In this paper, an ormocomp polymer nanowire with possible use in integrated-optics sensing applications is presented. We discuss the structure design, the fabrication process and present results of the simulation and characterization of the optical field profile. Since the nanowires are designed and intended to be used as integrated optics devices, they are attached to tapered and feed waveguides at their ends. The fabrication process in this work is based mainly on the nanoimprint technique. The method assumes a silicon nanowire as an original pattern, and polydimethylsiloxane (PDMS) as thesoft mold. The PDMS mold is directly imprinted on the ormocomp layer and then cured by UV light to form the polymer based nanowire. The ormocomp nanowires are fabricated to have various dimensions of width and length at a fixed 500nm thickness. The length of the nanowires is varied from 250 µm to 2 mm, whereas the width of the structures is varied between 500nm and 1µm. The possible optical mode field profile that occurs in the proposed polymer nanowire design is studied using the H-field finite element method (FEM). In the characterization part, the optical field profile and the intensity at the device output are the main focus of this paper. The various lengths of the nanowires show different characteristics in term of output intensity. An image processing is used to process the image to obtain the intensity of the output signal. A comparison of the optical field and output intensity for each polymer nanowire is also discussed.

  6. Permanent bending and alignment of ZnO nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Borschel, Christian; Spindler, Susann; Oertel, Michael; Ronning, Carsten [Institut fuer Festkoerperphysik, Friedrich-Schiller-Universitaet Jena, Max-Wien-Platz 1, 07743 Jena (Germany); Lerose, Damiana [MPI fuer Mikrostrukturphysik, Weinberg 2, 06120 Halle/Saale (Germany); Institut fuer Photonische Technologien, Albert-Einstein-Strasse 9, 07745 Jena (Germany); Bochmann, Arne [Institut fuer Photonische Technologien, Albert-Einstein-Strasse 9, 07745 Jena (Germany); Christiansen, Silke H. [Institut fuer Photonische Technologien, Albert-Einstein-Strasse 9, 07745 Jena (Germany); MPI fuer die Physik des Lichts, Guenther-Scharowsky-Str. 1, 91058 Erlangen (Germany); Nietzsche, Sandor [Zentrum fuer Elektronenmikroskopie, Friedrich-Schiller-Universitaet Jena, Ziegelmuehlenweg 1, 07743 Jena (Germany)

    2011-07-01

    Ion beams can be used to bend or re-align nanowires permanently, after they have been grown. We have irradiated ZnO nanowires with ions of different species and energy, achieving bending and alignment in various directions. We study the bending of single nanowires as well as the simultaneous alignment of large ensembles of ZnO nanowires in detail. Computer simulations show that the bending is initiated by ion beam induced damage. Dislocations are identified to relax stresses and make the bending and alignment permanent and resistant against annealing procedures.

  7. Cavity modes of tapered ZnO nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Xu Xiulai; Brossard, Frederic S F; Williams, David A [Hitachi Cambridge Laboratory, Hitachi Europe Ltd, JJ Thomson Avenue, Cambridge CB3 0HE (United Kingdom); Collins, Daniel P; Holmes, Mark J; Taylor, Robert A [Clarendon Laboratory, University of Oxford, Oxford OX1 3PU (United Kingdom); Zhang Xitian, E-mail: xx757@cam.ac.u, E-mail: xtzhangzhang@hotmail.co [Heilongjiang Key Laboratory for Advanced Functional Materials and Excited State Processes, School of Physics and Electronic Engineering, Harbin Normal University, Harbin 150025 (China)

    2010-08-15

    We report on a cavity mode mapping of ZnO tapered nanowires using micro-photoluminescence spectroscopy at room temperature. Both the Fabry-Perot (FP) and the whispering gallery (WG) modes are identified in a single wire. The emission spectra from single nanowires comprise regular Lorentzian peaks, which arise from the FP interference between the ends of the nanowire. The overall intensity along the tapered wire varies periodically. This variation is ascribed to WG mode resonances across the nanowire. The results agree well with the theoretical calculations using the finite-difference time-domain method.

  8. Single-crystalline vanadium dioxide nanowires with rectangular cross sections.

    Science.gov (United States)

    Guiton, Beth S; Gu, Qian; Prieto, Amy L; Gudiksen, Mark S; Park, Hongkun

    2005-01-19

    We report the synthesis of single-crystalline VO2 nanowires with rectangular cross sections using a vapor transport method. These nanowires have typical diameters of 60 (+/-30) nm and lengths up to >10 mum. Electron microscopy and diffraction measurements show that the VO2 nanowires are single crystalline and exhibit a monoclinic structure. Moreover, they preferentially grow along the [100] direction and are bounded by the (01) and (011) facets. These VO2 nanowires should provide promising materials for fundamental investigations of nanoscale metal-insulator transitions.

  9. Aluminum-catalyzed silicon nanowires: Growth methods, properties, and applications

    Energy Technology Data Exchange (ETDEWEB)

    Hainey, Mel F.; Redwing, Joan M. [Department of Materials Science and Engineering, Materials Research Institute, The Pennsylvania State University, University Park, Pennsylvania 16802 (United States)

    2016-12-15

    Metal-mediated vapor-liquid-solid (VLS) growth is a promising approach for the fabrication of silicon nanowires, although residual metal incorporation into the nanowires during growth can adversely impact electronic properties particularly when metals such as gold and copper are utilized. Aluminum, which acts as a shallow acceptor in silicon, is therefore of significant interest for the growth of p-type silicon nanowires but has presented challenges due to its propensity for oxidation. This paper summarizes the key aspects of aluminum-catalyzed nanowire growth along with wire properties and device results. In the first section, aluminum-catalyzed nanowire growth is discussed with a specific emphasis on methods to mitigate aluminum oxide formation. Next, the influence of growth parameters such as growth temperature, precursor partial pressure, and hydrogen partial pressure on nanowire morphology is discussed, followed by a brief review of the growth of templated and patterned arrays of nanowires. Aluminum incorporation into the nanowires is then discussed in detail, including measurements of the aluminum concentration within wires using atom probe tomography and assessment of electrical properties by four point resistance measurements. Finally, the use of aluminum-catalyzed VLS growth for device fabrication is reviewed including results on single-wire radial p-n junction solar cells and planar solar cells fabricated with nanowire/nanopyramid texturing.

  10. Au nanowire junction breakup through surface atom diffusion

    Science.gov (United States)

    Vigonski, Simon; Jansson, Ville; Vlassov, Sergei; Polyakov, Boris; Baibuz, Ekaterina; Oras, Sven; Aabloo, Alvo; Djurabekova, Flyura; Zadin, Vahur

    2018-01-01

    Metallic nanowires are known to break into shorter fragments due to the Rayleigh instability mechanism. This process is strongly accelerated at elevated temperatures and can completely hinder the functioning of nanowire-based devices like e.g. transparent conductive and flexible coatings. At the same time, arranged gold nanodots have important applications in electrochemical sensors. In this paper we perform a series of annealing experiments of gold and silver nanowires and nanowire junctions at fixed temperatures 473, 673, 873 and 973 K (200 °C, 400 °C, 600 °C and 700 °C) during a time period of 10 min. We show that nanowires are especially prone to fragmentation around junctions and crossing points even at comparatively low temperatures. The fragmentation process is highly temperature dependent and the junction region breaks up at a lower temperature than a single nanowire. We develop a gold parametrization for kinetic Monte Carlo simulations and demonstrate the surface diffusion origin of the nanowire junction fragmentation. We show that nanowire fragmentation starts at the junctions with high reliability and propose that aligning nanowires in a regular grid could be used as a technique for fabricating arrays of nanodots.

  11. Synthesis and Elastic Characterization of Zinc Oxide Nanowires

    Directory of Open Access Journals (Sweden)

    M. P. Manoharan

    2008-01-01

    Full Text Available Zinc oxide nanowires, nanobelts, and nanoneedles were synthesized using the vapor-liquid-solid technique. Young's modulus of the nanowires was measured by performing cantilever bending experiments on individual nanowires in situ inside a scanning electron microscope. The nanowires tested had diameters in the range of 200–750 nm. The average Young's modulus, measured to be 40 GPa, is about 30% of that reported at the bulk scale. The experimental results are discussed in light of the pronounced electromechanical coupling due to the piezoelectric nature of the material.

  12. Aluminum-catalyzed silicon nanowires: Growth methods, properties, and applications

    Science.gov (United States)

    Hainey, Mel F.; Redwing, Joan M.

    2016-12-01

    Metal-mediated vapor-liquid-solid (VLS) growth is a promising approach for the fabrication of silicon nanowires, although residual metal incorporation into the nanowires during growth can adversely impact electronic properties particularly when metals such as gold and copper are utilized. Aluminum, which acts as a shallow acceptor in silicon, is therefore of significant interest for the growth of p-type silicon nanowires but has presented challenges due to its propensity for oxidation. This paper summarizes the key aspects of aluminum-catalyzed nanowire growth along with wire properties and device results. In the first section, aluminum-catalyzed nanowire growth is discussed with a specific emphasis on methods to mitigate aluminum oxide formation. Next, the influence of growth parameters such as growth temperature, precursor partial pressure, and hydrogen partial pressure on nanowire morphology is discussed, followed by a brief review of the growth of templated and patterned arrays of nanowires. Aluminum incorporation into the nanowires is then discussed in detail, including measurements of the aluminum concentration within wires using atom probe tomography and assessment of electrical properties by four point resistance measurements. Finally, the use of aluminum-catalyzed VLS growth for device fabrication is reviewed including results on single-wire radial p-n junction solar cells and planar solar cells fabricated with nanowire/nanopyramid texturing.

  13. 1D-transport properties of single superconducting lead nanowires

    DEFF Research Database (Denmark)

    Michotte, S.; Mátéfi-Tempfli, Stefan; Piraux, L.

    2003-01-01

    We report on the transport properties of single superconducting lead nanowires grown by an electrodeposition technique, embedded in a nanoporous track-etched polymer membrane. The nanowires are granular, have uniform diameter of ̃40 nm and a very large aspect ratio (̃500). The diameter of the nan......We report on the transport properties of single superconducting lead nanowires grown by an electrodeposition technique, embedded in a nanoporous track-etched polymer membrane. The nanowires are granular, have uniform diameter of ̃40 nm and a very large aspect ratio (̃500). The diameter...

  14. Deformation mechanisms of Cu nanowires with planar defects

    Science.gov (United States)

    Tian, Xia; Yang, Haixia; Cui, Junzhi; Yu, Xingang; Wan, Rui

    2015-01-01

    Molecular dynamics simulations are used to investigate the mechanical behavior of Cu nanowires (NWs) with planar defects such as grain boundaries (GBs), twin boundaries (TBs), stacking faults (SFs), etc. To investigate how the planar defects affect the deformation and fracture mechanisms of naowires, three types of nanowires are considered in this paper: (1) polycrystalline Cu nanowire; (2) single-crystalline Cu nanowire with twin boundaries; and (3) single-crystalline Cu nanowire with stacking faults. Because of the large fraction of atoms at grain boundaries, the energy of grain boundaries is higher than that of the grains. Thus, grain boundaries are proved to be the preferred sites for dislocations to nucleate. Moreover, necking and fracture prefer to occur at the grain boundary interface owing to the weakness of grain boundaries. For Cu nanowires in the presence of twin boundaries, it is found that twin boundaries can strength nanowires due to the restriction of the movement of dislocations. The pile up of dislocations on twin boundaries makes them rough, inducing high energy in twin boundaries. Hence, twin boundaries can emit dislocations, and necking initiates at twin boundaries. In the case of Cu nanowires with stacking faults, all pre-existing stacking faults in the nanowires are observed to disappear during deformation, giving rise to a fracture process resembling the samples without stacking fault.

  15. Synthesis of Single Crystal GaN Nanowires

    Directory of Open Access Journals (Sweden)

    Lining Fang

    2016-05-01

    Full Text Available The straight and curved gallium nitride (GaN nanowires were successfully synthesized by controlling the gallium/ nitrogen reactant ratio via a chemical vapour deposition method. The structure and morphology of nanowires were characterized by X-ray diffraction (XRD, transmission electronic microscopy (TEM, field emission scanning electron microscopy (FESEM, selected area electron diffraction (SAED and high resolution transmission electron microscopy (HRTEM. The straight and curved GaN nanowires are composed of wurtzite and a zinc blende structure, respectively. Photoluminescence (PL spectra of zinc blende GaN nanowires showed a strong UV emission band at 400 nm, indicating potential application in optoe‐ lectronic devices.

  16. The impact of nanocontact on nanowire based nanoelectronics.

    Science.gov (United States)

    Lin, Yen-Fu; Jian, Wen-Bin

    2008-10-01

    Nanowire-based nanoelectronic devices will be innovative electronic building blocks from bottom up. The reduced nanocontact area of nanowire devices magnifies the contribution of contact electrical properties. Although a lot of two-contact-based ZnO nanoelectronics have been demonstrated, the electrical properties bringing either from the nanocontacts or from the nanowires have not been considered yet. High quality ZnO nanowires with a small deviation and an average diameter of 38 nm were synthesized to fabricate more than thirty nanowire devices. According to temperature behaviors of current-voltage curves and resistances, the devices could be grouped into three types. Type I devices expose thermally activated transport in ZnO nanowires and they could be considered as two Ohmic nanocontacts of the Ti electrode contacting directly on the nanowire. For those nanowire devices having a high resistance at room temperatures, they can be fitted accurately with the thermionic-emission theory and classified into type II and III devices according to their rectifying and symmetrical current-voltage behaviors. The type II device has only one deteriorated nanocontact and the other one Ohmic contact on single ZnO nanowire. An insulating oxide layer with thickness less than 20 nm should be introduced to describe electron hopping in the nanocontacts, so as to signalize one- and high-dimensional hopping conduction in type II and III devices.

  17. Synthesis and Growth Mechanism of Ni Nanotubes and Nanowires

    Directory of Open Access Journals (Sweden)

    Wang Yiqian

    2009-01-01

    Full Text Available Abstract Highly ordered Ni nanotube and nanowire arrays were fabricated via electrodeposition. The Ni microstructures and the process of the formation were investigated using conventional and high-resolution transmission electron microscope. Herein, we demonstrated the systematic fabrication of Ni nanotube and nanowire arrays and proposed an original growth mechanism. With the different deposition time, nanotubes or nanowires can be obtained. Tubular nanostructures can be obtained at short time, while nanowires take longer time to form. This formation mechanism is applicable to design and synthesize other metal nanostructures and even compound nanostuctures via template-based electrodeposition.

  18. Flexible integration of free-standing nanowires into silicon photonics.

    Science.gov (United States)

    Chen, Bigeng; Wu, Hao; Xin, Chenguang; Dai, Daoxin; Tong, Limin

    2017-06-14

    Silicon photonics has been developed successfully with a top-down fabrication technique to enable large-scale photonic integrated circuits with high reproducibility, but is limited intrinsically by the material capability for active or nonlinear applications. On the other hand, free-standing nanowires synthesized via a bottom-up growth present great material diversity and structural uniformity, but precisely assembling free-standing nanowires for on-demand photonic functionality remains a great challenge. Here we report hybrid integration of free-standing nanowires into silicon photonics with high flexibility by coupling free-standing nanowires onto target silicon waveguides that are simultaneously used for precise positioning. Coupling efficiency between a free-standing nanowire and a silicon waveguide is up to ~97% in the telecommunication band. A hybrid nonlinear-free-standing nanowires-silicon waveguides Mach-Zehnder interferometer and a racetrack resonator for significantly enhanced optical modulation are experimentally demonstrated, as well as hybrid active-free-standing nanowires-silicon waveguides circuits for light generation. These results suggest an alternative approach to flexible multifunctional on-chip nanophotonic devices.Precisely assembling free-standing nanowires for on-demand photonic functionality remains a challenge. Here, Chen et al. integrate free-standing nanowires into silicon waveguides and show all-optical modulation and light generation on silicon photonic chips.

  19. Nanomanufacturing of silica nanowires: Synthesis, characterization and applications

    Science.gov (United States)

    Sekhar, Praveen Kumar

    In this research, selective and bottom-up manufacturing of silica nanowires on silicon (Si) and its applications has been investigated. Localized synthesis of these nanowires on Si was achieved by metal thin film catalysis and metal ion implantation based seeding approach. The growth mechanism of the nanowires followed a vapor-liquid-solid (VLS) mechanism. Mass manufacturing aspects such as growth rate, re-usability of the substrate and experimental growth model were also investigated. Further, silica nanowires were explored as surface enhanced Raman (SER) substrate and immunoassay templates towards optical and electrochemical detection of cancer biomarkers respectively. Investigating their use in photonic applications, optically active silica nanowires were synthesized by erbium implantation after nanowire growth and implantation of erbium as a metal catalyst in Si to seed the nanowires. Ion implantation of Pd in Si and subsequent annealing in Ar at 1100 0 C for 60 mins in an open tube furnace resulted in silica nanowires of diameters ranging from 15 to 90 nm. Similarly, Pt was sputtered on to Si and further annealed to obtain silica nanowires of diameters ranging from 50 to 500 nm. Transmission electron microscopy studies revealed the amorphous nature of the wires. In addition, nano-sized Pd catalyst was found along the body of the nanowires seeded by Pd implantation into Si. After functionalization of the wires with 3 - AminoPropylTriMethoxySilane (APTMS), the Pd decorated silica nanowires served as an SER substrate exhibiting a sensitivity of 10 7 towards the detection of interleukin-10 (IL-10, a cancer biomarker) with higher spatial resolution. Voltammetric detection of IL-10 involved silica nanowires synthesized by Pd thin film catalysis on Si as an immunoassay template. Using the electrochemical scheme, the presence of IL-10 was detected down to 1fg/mL in ideal pure solution and 1 pg/mL in clinically relevant samples. Time resolved photoluminescence (PL

  20. Testing CuO nanowires as a novel X-ray to electron converter for gas-filled radiation detectors

    Science.gov (United States)

    Zarei, H.; Saramad, S.; Razaghi, S.

    2017-10-01

    Nanowires, due to their special physical properties and also high surface to volume ratio, can have considerable applications in designing and development of novel nanodevices. For the radiation shielding, higher absorption coefficient of nanostructures in comparison to bulk ones is an advantage. In gas detectors, designing a proper converter that absorbs higher energy of gamma and X-rays and convert it to more free electrons is one of the major problems. Since the nanowires have higher surface to volume ratio in comparison to the bulk one, so it is expected that by optimizing the thickness, the generated electrons can have higher chance to escape from the surface. In this work, the random CuO nanowires with diameter of 40 nm are deposited on thin glass slide. This nanostructure with different thicknesses are tested by plastic and CsI scintillators by X-ray tube with HVs in the range of 16 to 25 kV. The results show that for the same thickness, the CuO nanowires can release electrons six times more than the bulk ones and for the same energy the optimum QE of nanoconverter can be three times greater than the bulk converter. This novel nanoconverter with higher detection efficiency can have applications in high energy physics, medical imaging and also astronomy.