WorldWideScience

Sample records for randomly oriented grains

  1. Orientation-and-Location Controlled Single-Grain TFTs on Glass Substrate

    NARCIS (Netherlands)

    Chen, T.

    2011-01-01

    Location controlled single-grain TFT by ?-Czochralski process has attracted a lot of interest due to its high field effect mobility which is comparable to SOI. However, the major challenge is the random orientation of the grains due to the lack of seed layer to control the orientation. This will

  2. Evolution of orientations and deformation structures within individual grains in cold rolled columnar grained nickel

    DEFF Research Database (Denmark)

    Wu, G.L.; Godfrey, A.; Winther, Grethe

    2011-01-01

    Columnar grained Ni is used as a model material allowing simultaneous non-surface investigations of the evolution of crystallographic orientations and deformation microstructures within individual grains as a function of rolling strain up to ε=0.7. Electron channelling contrast and electron...

  3. Pollen Grains, Random Walks and Einstein

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 10; Issue 12. Pollen Grains, Random Walks and Einstein. Sriram Ramaswamy. Volume 10 Issue 12 December 2005 pp 106-124. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/010/12/0106-0124 ...

  4. Pollen Grains, Random Walks and Einstein

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 3. Pollen Grains, Random Walks and Einstein. Sriram Ramaswamy. General Article Volume 5 Issue 3 March 2000 pp 16-34. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/005/03/0016-0034 ...

  5. Mechanism of secondary recrystallization of Goss grains in grain-oriented electrical steel

    Science.gov (United States)

    Hayakawa, Yasuyuki

    2017-01-01

    Abstract Since its invention by Goss in 1934, grain-oriented (GO) electrical steel has been widely used as a core material in transformers. GO exhibits a grain size of over several millimeters attained by secondary recrystallization during high-temperature final batch annealing. In addition to the unusually large grain size, the crystal direction in the rolling direction is aligned with , which is the easy magnetization axis of α-iron. Secondary recrystallization is the phenomenon in which a certain very small number of {110} (Goss) grains grow selectively (about one in 106 primary grains) at the expense of many other primary recrystallized grains. The question of why the Goss orientation is exclusively selected during secondary recrystallization has long been a main research subject in this field. The general criterion for secondary recrystallization is a small and uniform primary grain size, which is achieved through the inhibition of normal grain growth by fine precipitates called inhibitors. This paper describes several conceivable mechanisms of secondary recrystallization of Goss grains mainly based on the selective growth model. PMID:28804524

  6. Crystal preferred orientation in peridotite ultramylonites deformed by grain size sensitive creep, étang de Lers, Pyrenees, France

    NARCIS (Netherlands)

    Drury, M.R.; Avé Lallemant, H.G.; Pennock, G.M.; Palasse, L.N.

    2011-01-01

    In naturally deformed upper mantle rocks a strong olivine crystallographic preferred orientation (CPO) occurs in rocks with grain sizes larger than about 15 mm. Finer grained peridotites tend to have weak to random olivine CPO. The different types of olivine CPO are usually interpreted in relation

  7. Grain orientation dependence of deformation twinning in pure Cu subjected to dynamic plastic deformation

    DEFF Research Database (Denmark)

    Hong, C.S.; Tao, N.R.; Lu, K.

    2009-01-01

    A clear grain orientation dependence of deformation twinning has been identified in coarse-grained copper subjected to dynamic plastic deformation. Deformation twins tend to occur in grains with orientations near the [0 0 1] corner but not in grains near the [1 0 1] corner, which can be explained...

  8. Grain orientation distribution and development of grain line in highly ordered Bi4Si3O12 micro-crystals

    OpenAIRE

    Zhang Z.G.; Wang X.F.; Tian Q.Q.

    2010-01-01

    Bismuth silicate (Bi4Si3O12) micro-crystals with a grain line structure were grown by a sintering method under atmosphere pressure. The as-grown products were studied using Xray diffraction (XRD) and Environmental scanning electron microscopy (ESEM). The grain orientation law was tested by the One-Sample Kolmogorov-Smirnov (K-S) test. The result shows Bi4Si3O12 grains are always distributed in pairs on both sides of a stable line. On one side of a line, the angle between grain orientation and...

  9. On the orientations of abnormally grown grains in nanocrystalline Ni and Ni–Fe

    National Research Council Canada - National Science Library

    KLEMENT, U; Da SILVA, M; SKROTZKI, W

    2008-01-01

    The scanning electron microscopy–based electron backscatter diffraction technique has been used to determine grain orientations of abnormally grown grains upon annealing in nanocrystalline Ni and Ni–20 at.% Fe electrodeposits...

  10. Grain interaction mechanisms leading to intragranular orientation spread in tensile deformed bulk grains of interstitial-free steel

    DEFF Research Database (Denmark)

    Winther, Grethe; Wright, Jonathan P.; Schmidt, Søren

    2017-01-01

    The spatially resolved intragranular orientation spread in two representative bulk grains of interstitial-free steel deformed to 9% tension has been investigated. A three-dimensional X-ray diffraction microscopy experiment revealed that the two similarly oriented grains are both embedded in local...... environments representing the bulk texture, yet their deformation-induced rotations are very different. The ALAMEL model is employed to analyse the grain interaction mechanisms. Predictions of this model qualitatively agree with the directionality and magnitude of the experimental orientation spread. However......, quantitative agreement requires fine-tuning of the boundary conditions. The majority of the modelled slip is accounted for by four slip systems also predicted to be active by the classical Taylor model in uniaxial tension, and most of the orientation spread along the grain boundaries is caused by relative...

  11. Pollen Grains, Random Walks and Einstein

    Indian Academy of Sciences (India)

    wnian motion show us how the most profound physics and mathematics can emerge from simple, direct obser- vation of natural phenomena. Ideas related to Brownian motion and random walks appear today in mathematics, all the natural sciences, engineering, linguistics, finance, economics, and even the social sciences.

  12. 78 FR 70574 - Grain-Oriented Electrical Steel From China, Czech Republic, Germany, Japan, Korea, Poland, and...

    Science.gov (United States)

    2013-11-26

    ...-1237 (Preliminary)] Grain-Oriented Electrical Steel From China, Czech Republic, Germany, Japan, Korea... China, Czech Republic, Germany, Japan, Korea, Poland, and Russia of grain-oriented electrical steel... (November 2013), entitled Grain-Oriented Electrical Steel From China, Czech Republic, Germany, Japan, Korea...

  13. Reconstruction of Single-Grain Orientation Distribution Functions for Crystalline Materials

    DEFF Research Database (Denmark)

    Hansen, Per Christian; Sørensen, Henning Osholm; Sükösd, Zsuzsanna

    A fundamental imaging problem in microstructural analysis of metals is the reconstruction of local crystallographic orientations from X-ray diffraction measurements. This work deals with the computation of the 3D orientation distribution function for individual grains of the material in considera......A fundamental imaging problem in microstructural analysis of metals is the reconstruction of local crystallographic orientations from X-ray diffraction measurements. This work deals with the computation of the 3D orientation distribution function for individual grains of the material...

  14. Correlation between the grain orientation dependence of color etching and chemical etching.

    Science.gov (United States)

    Bonyár, Attila; Szabó, Peter J

    2012-12-01

    A gray cast iron specimen was investigated by color and chemical etching with optical and atomic force microscopy, and the effect of grain orientation on the effectiveness of etching was examined. It was proven that the grain orientation dependence of chemical and color etching is just the opposite, and that the specimen surface after color etching is not uniformly smooth. Explanation for the layer structure of the color etched iron specimen is given.

  15. A fine-grained debugger for aspect-oriented programming

    NARCIS (Netherlands)

    Yin, Haihan; Bockisch, Christoph; Aksit, Mehmet

    2012-01-01

    To increase modularity, aspect-oriented programming provides a mechanism based on implicit invocation: An aspect can influence runtime behavior of other modules without the need that these modules refer to the aspect. Recent studies show that a significant part of reported bugs in aspect-oriented

  16. Characterizing Grain-Oriented Silicon Steel Sheet Using Automated High-Resolution Laue X-ray Diffraction

    Science.gov (United States)

    Lynch, Peter; Barnett, Matthew; Stevenson, Andrew; Hutchinson, Bevis

    2017-11-01

    Controlling texture in grain-oriented (GO) silicon steel sheet is critical for optimization of its magnetization performance. A new automated laboratory system, based on X-ray Laue diffraction, is introduced as a rapid method for large scale grain orientation mapping and texture measurement in these materials. Wide area grain orientation maps are demonstrated for both macroetched and coated GO steel sheets. The large secondary grains contain uniform lattice rotations, the origins of which are discussed.

  17. Quantitative characterization of the orientation spread within individual grains in copper after tensile deformation

    DEFF Research Database (Denmark)

    Krog-Pedersen, Stine; Bowen, Jacob R.; Pantleon, Wolfgang

    2009-01-01

    of the orientation spread and the former the extent of the distribution in orientation space along these principal axes allowing a classification of the disorientation distribution into archetypical shapes. The disorientation distributions developed in grains with tensile axes close to [001] or [011] are more...

  18. Surface roughening and grain orientation dependence of the erosion of polycrystalline stainless steel by hydrogen irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Balden, M. E-mail: martin.balden@ipp.mpg.de; Bardamid, A.F.; Belyaeva, A.I.; Slatin, K.A.; Davis, J.W.; Haasz, A.A.; Poon, M.; Konovalov, V.G.; Ryzhkov, I.V.; Shapoval, A.N.; Voitsenya, V.S

    2004-08-01

    Surface roughening of polycrystalline stainless steel mirrors due to hydrogen bombardment was studied as a function of ion fluence and energy (1-4.3 x 10{sup 24} H/m{sup 2}, 300-1500 eV/H). A strong micro-relief (100 nm scale) on single grains and a strong variation of the erosion depth between different grains were observed by scanning electron microscopy (SEM). A broad variation of the in-grain micro-relief was found to be independent of impact energy. The sputtering yield (Y) depends on the grain orientation, varying by a factor of about 2 for all impact energies. The correlation between surface morphology and orientation of the single grains was investigated using electron back-scattering diffraction (EBSD). Grains with nearly (1 1 1) surface orientation do not show any significant in-grain micro-relief, although they have nearly the highest Y. For other orientations close to low indexed surfaces, e.g., (3 1 1), no correlation was found between Y and roughness.

  19. Grain- to multiple-grain-scale deformation processes during diffusion creep of forsterite + diopside aggregate: 2. Grain boundary sliding-induced grain rotation and its role in crystallographic preferred orientation in rocks

    Science.gov (United States)

    Maruyama, G.; Hiraga, T.

    2017-08-01

    Polycrystalline samples composed of either tabular or equiaxed forsterite grains +diopside (5 and 20 vol %) were deformed with a grid etched onto the lateral surface. In Part 1 of this study, we identified grain boundary sliding (GBS) and rigid body-like grain rotation during deformation by diffusion creep where samples with tabular forsterite grains were shown to develop low-index plane grain boundaries that result in crystallographic preferred orientation (CPO). Here we examine how grain rotation depends on the sample strain, grain size, phases, grain shapes, and orientations relative to the compression axis and long axes of tabular forsterite grains. Based on these results, we model grain rotation due to GBS that occurs preferentially along low-index plane boundaries. The model reproduces all of the characteristics of grain rotation and together with the observed grain rotation rates in tabular and equiaxed grain samples, we estimate that low-index plane boundaries have a lower viscosity by a factor of 3 relative to general grain boundaries, which results in the development of CPO during diffusion creep. The observed constant rotation rate of 0.4 (radian/strain) in equiaxed-grain samples and in tabular-grain samples deformed to a strain of >0.5 is considered to be a minimum and further, a material-independent rotation rate during diffusion creep, indicating grain rotation as a primary microprocess during diffusion creep. We discuss the possible consequences of GBS-induced grain rotation and CPO development in rock microstructure and the seismic properties of the Earth's mantle.

  20. Microstructure of individual grains in cold-rolled aluminium from orientation inhomogeneities resolved by electron backscattering diffraction

    DEFF Research Database (Denmark)

    He, Wei; Ma, Weitao; Pantleon, Wolfgang

    2008-01-01

    The deformation structure within individual grains of a deformed material is resolved by electron backscattering diffraction. The employed evaluation scheme for local orientation data is illustrated on cold-rolled aluminium. The orientation distribution of each grain is characterized by an averaged...... orientation spread and its anisotropy; the dependence of both parameters on grain size and grain orientation is discussed. The preferred rotation axis in each grain is determined and shows a dominant orientation spreading around the transversal direction. Characteristic features of the deformation structure...... (as alternating orientation differences or orientation gradients) are resolved from sign-carrying disorientation angles defined with respect to the preferred rotation axis in each grain. Five components of the dislocation density tensor - corresponding to part of the geometrically necessary...

  1. The impact of niobium on the microstructure, texture and magnetic properties of strip-cast grain oriented silicon steel

    Science.gov (United States)

    Fang, F.; Lan, M. F.; Lu, X.; Zhang, Y. X.; Wang, Y.; Yuan, G.; Cao, G. M.; Xu, Y. B.; Misra, R. D. K.; Wang, G. D.

    2017-11-01

    We elucidate here the impact of niobium in ultra-low carbon grain oriented electrical steel (GOES) in terms of microstructure, texture, precipitation and magnetic properties that was processed by twin roll strip casting. Coarse and complex MnS + NbN precipitates, and fine NbN were nucleated at the grain boundaries and in the interior of the grain in the as-cast strip, which contributed to a small degree of grain refinement together with relatively random texture, and AlN precipitation was suppressed during the strip casting process. NbN continuously precipitated during the entire process and exhibited high stability during the reheating cycle, which provided stronger inhibiting force in comparison to AlN precipitates. As a consequence, fine and homogeneous inhibitors were obtained in the primary annealed sheet in the presence of Nb under cold rolling and annealing parameters used in the present study. On considering the effect of NbN particles or Nb in solution on the deformation and recrystallization behavior, the primary annealed Nb-containing sheet exhibited significantly more homogeneous microstructure in relation to Nb-free GOES, with grain size in the range of ∼8-12 μm, and was characterized by relatively more pronounced γ-fiber and weak Goss texture, beneficial for the abnormal growth of Goss grains. Furthermore, Nb-containing GOES experienced complete abnormal growth during secondary recrystallization annealing, such that the enhanced magnetic induction (B8 as high as 1.88 T) was obtained. In summary, the present study underscores that NbN can be used as an effective inhibitor in ultra-low carbon grain oriented electrical steel using strip casting technology.

  2. Analysis of Orientation Relations Between Deformed Grains and Recrystallization Nuclei

    DEFF Research Database (Denmark)

    West, Stine S.; Winther, Grethe; Juul Jensen, Dorte

    2011-01-01

    Nucleation in 30 pct rolled high-purity aluminum samples was investigated by the electron backscattering pattern method before and after annealing. A total of 29 nuclei including two twins were observed, and approximately one third of these nuclei had orientations not detected in the deformed sta...

  3. Implementation of Two-Dimensional Polycrystalline Grains in Object Oriented Micromagnetic Framework

    Directory of Open Access Journals (Sweden)

    Lau, J. W.

    2009-01-01

    Full Text Available In response to the growing need for a more accurate micromagnetic model to understand switching phenomenon in nanoscale magnets, we developed the capability to simulate two-dimensional polycrystalline grains using the Object Oriented Micromagnetic Framework (OOMMF. This addition allows users full flexibility in determining the magnetocrystalline anisotropy and axe in each grain as well as the inter- and intragranular exchange coupling strength.

  4. Shape preferred orientation of iron grains compatible with Earth's uppermost inner core hemisphericity

    Science.gov (United States)

    Calvet, Marie; Margerin, Ludovic

    2018-01-01

    Constraining the possible patterns of iron fabrics in the Earth's Uppermost Inner Core (UIC) is key to unravel the mechanisms controlling its growth and dynamics. In the framework of crystalline micro-structures composed of ellipsoidal, aligned grains, we discuss possible textural models of UIC compatible with observations of P-wave attenuation and velocity dispersion. Using recent results from multiple scattering theory in textured heterogeneous materials, we compute the P-wave phase velocity and scattering attenuation as a function of grain volume, shape, and orientation wrt to the propagation direction of seismic P-waves. Assuming no variations of the grain volume between the Eastern and Western hemisphere, we show that two families of texture are compatible with the degree-one structure of the inner core as revealed by the positive correlation between seismic velocity and attenuation. (1) Strong flattening of grains parallel to the Inner Core Boundary in the Western hemisphere and weak anisometry in the Eastern hemisphere. (2) Strong radial elongation of grains in the Western hemisphere and again weak anisometry in the Eastern hemisphere. Both textures can quantitatively explain the seismic data in a limited range of grain volumes. Furthermore, the velocity and attenuation anisotropy locally observed under Africa demands that the grains be locally elongated in the direction of Earth's meridians. Our study demonstrates that the hemispherical seismic structure of UIC can be entirely explained by changes in the shape and orientation of grains, thereby offering an alternative to changes in grain volumes. In the future, our theoretical toolbox could be used to systematically test the compatibility of textures predicted by geodynamical models with seismic observations.

  5. Oriented grain growth and modification of 'frozen anisotropy' in the lithospheric mantle

    Science.gov (United States)

    Boneh, Yuval; Wallis, David; Hansen, Lars N.; Krawczynski, Mike J.; Skemer, Philip

    2017-09-01

    Seismic anisotropy throughout the oceanic lithosphere is often assumed to be generated by fossilized texture formed during deformation at asthenospheric temperatures close to the ridge. Here we investigate the effect of high-temperature and high-pressure static annealing on the texture of previously deformed olivine aggregates to simulate residence of deformed peridotite in the lithosphere. Our experiments indicate that the orientation and magnitude of crystallographic preferred orientation (CPO) will evolve due to the preferential growth of grains with low dislocation densities. These observations suggest that texture and stored elastic strain energy promote a style of grain growth that modifies the CPO of a deformed aggregate. We demonstrate that these microstructural changes alter the orientation distributions and magnitudes of seismic wave velocities and anisotropy. Therefore, static annealing may complicate the inference of past deformation kinematics from seismic anisotropy in the lithosphere.

  6. 78 FR 59059 - Grain-Oriented Electrical Steel From China, Czech Republic, Germany, Japan, Korea, Poland, and...

    Science.gov (United States)

    2013-09-25

    ... COMMISSION Grain-Oriented Electrical Steel From China, Czech Republic, Germany, Japan, Korea, Poland, and... materially retarded, by reason of imports from China of grain-oriented electrical steel (``GOES''), provided... United States, that are alleged to be subsidized by the Government of China and imports from China, Czech...

  7. 2D stochastic-integral models for characterizing random grain noise in titanium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Sabbagh, Harold A.; Murphy, R. Kim; Sabbagh, Elias H. [Victor Technologies, LLC, PO Box 7706, Bloomington, IN 47407-7706 (United States); Cherry, Matthew [University of Dayton Research Institute, 300 College Park Dr., Dayton, OH 45410 (United States); Pilchak, Adam; Knopp, Jeremy S.; Blodgett, Mark P. [Air Force Research Laboratory (AFRL/RXC), Wright Patterson AFB OH 45433-7817 (United States)

    2014-02-18

    We extend our previous work, in which we applied high-dimensional model representation (HDMR) and analysis of variance (ANOVA) concepts to the characterization of a metallic surface that has undergone a shot-peening treatment to reduce residual stresses, and has, therefore, become a random conductivity field. That example was treated as a onedimensional problem, because those were the only data available. In this study, we develop a more rigorous two-dimensional model for characterizing random, anisotropic grain noise in titanium alloys. Such a model is necessary if we are to accurately capture the 'clumping' of crystallites into long chains that appear during the processing of the metal into a finished product. The mathematical model starts with an application of the Karhunen-Loève (K-L) expansion for the random Euler angles, θ and φ, that characterize the orientation of each crystallite in the sample. The random orientation of each crystallite then defines the stochastic nature of the electrical conductivity tensor of the metal. We study two possible covariances, Gaussian and double-exponential, which are the kernel of the K-L integral equation, and find that the double-exponential appears to satisfy measurements more closely of the two. Results based on data from a Ti-7Al sample will be given, and further applications of HDMR and ANOVA will be discussed.

  8. Comparison between strong η-fiber-oriented high-silicon steel and grain-oriented high-silicon steel on magnetic properties

    Science.gov (United States)

    Qin, Jing; Yue, Ye; Zhang, Yinghui; Cao, Yanyan; Yang, Ping

    2017-10-01

    Two kinds of 0.23 mm-thick high-silicon steel sheets with strong η-fiber texture and Goss texture were produced by rolling methods. Their final microstructures, textures and magnetic properties were analyzed by scanning electron microscope (SEM), transmission electron microscope (TEM), energy-dispersive spectroscopy (EDS), X-ray diffractometer (XRD), electron backscattered diffraction (EBSD) and classical loss separation. The results showed that the core loss of strong η-fiber-oriented high-silicon steel was lower than that of grain-oriented high-silicon steel at frequencies ranging from 40 Hz to 20 kHz, and their differences in core loss were more obvious at 400 Hz and higher frequencies. The hysteresis losses and anomalous losses of the strong η-fiber-oriented high-silicon steel were lower than that of grain-oriented high-silicon steel at frequencies ranging from 40 Hz to 1000 Hz, and the losses were closely related to final cleanness and grain sizes. A few stable remained nitride precipitates increased the hysteresis loss of the grain-oriented high-silicon steel. The effect of decreasing grain sizes on decreasing core losses at high frequencies was significant, and the strong η-fiber-oriented high-silicon steel was more suitable for high frequency applications because of smaller grain sizes compared to the grain-oriented high-silicon steel.

  9. Effects of seed orientation on the growth behavior of single grain REBCO bulk superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Hee Gyoun [Korea Polytechnic University, Siheung (Korea, Republic of)

    2017-06-15

    This study presents a simple method to control the seed orientation which leads to the various growth characteristics of a single grain REBCO (RE: rare-earth elements) bulk superconductors. Seed orientation was varied systematically from c-axis to a-axis with every 30 degree rotation around b-axis. Orientations of a REBCO single grain was successfully controlled by placing the seed with various angles on the prismatic indent prepared on the surface of REBCO powder compacts. Growth pattern was changed from cubic to rectangular when the seed orientation normal to compact surface was varied from c-axis to a-axis. Macroscopic shape change has been explained by the variation of the wetting angle of un-reacted melt depending on the interface energy between YBa2Cu3O7-y (Y123) grain and melt. Higher magnetic levitation force was obtained for the specimen prepared using tilted seed with an angle of 30 degree rotation around b-axis.

  10. Three-dimensional investigation of grain orientation effects on void growth in commercially pure titanium

    Energy Technology Data Exchange (ETDEWEB)

    Pushkareva, Marina [Department of Mechanical Engineering, University of Ottawa, 150 Louis Pasteur, Ottawa, ON, Canada K1N 6N5 (Canada); Adrien, Jérôme; Maire, Eric [Université de Lyon, INSA-Lyon, MATEIS CNRS UMR5510, 7 Avenue Jean Capelle, F-69621 Villeurbanne (France); Segurado, Javier; Llorca, Javier [IMDEA Materials Institute, C/Eric Kandel 2, 28906 Getafe, Madrid (Spain); Department of Materials Science, Polytechnic University of Madrid, E. T. S. de Ingenieros de Caminos, 28040 Madrid (Spain); Weck, Arnaud, E-mail: aweck@uottawa.ca [Department of Mechanical Engineering, University of Ottawa, 150 Louis Pasteur, Ottawa, ON, Canada K1N 6N5 (Canada); IMDEA Materials Institute, C/Eric Kandel 2, 28906 Getafe, Madrid (Spain); Department of Physics, University of Ottawa, 150 Louis Pasteur, Ottawa, ON, Canada K1N 6N5 (Canada); Centre for Research in Photonics at the University of Ottawa, 800 King Edward Ave., Ottawa, ON, Canada K1N 6N5 (Canada)

    2016-08-01

    The fracture process of commercially pure titanium was visualized in model materials containing artificial holes. These model materials were fabricated using a femtosecond laser coupled with a diffusion bonding technique to obtain voids in the interior of titanium samples. Changes in void dimensions during in-situ straining were recorded in three dimensions using x-ray computed tomography. Void growth obtained experimentally was compared with the Rice and Tracey model which predicted well the average void growth. A large scatter in void growth data was explained by differences in grain orientation which was confirmed by crystal plasticity simulations. It was also shown that grain orientation has a stronger effect on void growth than intervoid spacing and material strength. Intervoid spacing, however, appears to control whether the intervoid ligament failure is ductile or brittle.

  11. Boundary Fractal Analysis of Two Cube-oriented Grains in Partly Recrystallized Copper

    DEFF Research Database (Denmark)

    Sun, Jun; Zhang, Yubin; Dahl, Anders Bjorholm

    2015-01-01

    The protrusions and retrusions observed on the recrystallizing boundaries affect the migration kinetics during recrystallization. Characterization of the boundary roughness is necessary in order to evaluate their effects. This roughness has a structure that can be characterized by fractal analysi......, and in this study the so-called “Minkowski sausage” method is adopted. Hereby, two cube-oriented grains in partly recrystallized microstructures are analyzed and quantitative information regarding the dimensions of protrusions/retrusions is obtained....

  12. Topological defects in two-dimensional orientation-field models for grain growth

    Science.gov (United States)

    Korbuly, Bálint; Plapp, Mathis; Henry, Hervé; Warren, James A.; Gránásy, László; Pusztai, Tamás

    2017-11-01

    Standard two-dimensional orientation-field-based phase-field models rely on a continuous scalar field to represent crystallographic orientation. The corresponding order parameter space is the unit circle, which is not simply connected. This topological property has important consequences for the resulting multigrain structures: (i) trijunctions may be singular; (ii) for each pair of grains there exist two different grain boundary solutions that cannot continuously transform to one another; (iii) if both solutions appear along a grain boundary, a topologically stable, singular point defect must exist between them. While (i) can be interpreted in the classical picture of grain boundaries, (ii) and therefore (iii) cannot. In addition, singularities cause difficulties, such as lattice pinning in numerical simulations. To overcome these problems, we propose two formulations of the model. The first is based on a three-component unit vector field, while in the second we utilize a two-component vector field with an additional potential. In both cases, the additional degree of freedom introduced makes the order parameter space simply connected, which removes the topological stability of these defects.

  13. Temperature Dependence of Piezoelectric Properties of Grain-Oriented CaBi4Ti4O15 Ceramics

    Science.gov (United States)

    Ogawa, Hirozumi; Kimura, Masahiko; Ando, Akira; Sakabe, Yukio

    2001-09-01

    Piezoelectric properties of grain-oriented bismuth layer structured compound CaBi4Ti4O15 ceramics and their temperature dependencies were studied. The grain-oriented CaBi4Ti4O15 ceramics were fabricated by the templated grain growth method. The highly preferentially (00l) oriented CaBi4Ti4O15 ceramics were obtained and their Lotgering (00l) orientation degree was almost 100%. The electromechanical coupling coefficient of the longitudinal vibration mode (k33) was approximately three times as large as that of the nonoriented specimen, and the temperature coefficient of resonant frequency (|fr-TC|) was the same as that of the nonoriented specimen. The 24 vibration mode is separated from the 15 vibration mode in the thickness shear vibration of the grain-oriented ceramics. The electromechanical coupling coefficient k15 of the grain-oriented specimen was twice as large as k15 of the nonoriented ceramics, while, k24 was one-third that of k15 of the nonoriented specimen. The |fr-TC| of the 15 vibration mode of the grain-oriented specimen was half that of the 15 vibration mode in the nonoriented ceramics, and that of the 24 vibration mode of the oriented specimen was much larger than that of the 15 vibration mode in the nonoriented ceramics.

  14. Effect of annealing atmospheres on secondary recrystallization in thin-gauge grain-oriented silicon steel: Microstructures and textures

    Science.gov (United States)

    He, Cheng-xu; Yang, Fu-yao; Meng, Li; Ma, Guang; Chen, Xin; Hou, Peng-fei; Zhang, Wen-kang

    2017-10-01

    By controlling the onset temperature of secondary recrystallization and the temperature interval for grain growth, the annealing atmosphere is the key factor affecting the grain size and texture of grain-oriented silicon steel. The thin-gauge cold-rolled grain-oriented silicon steel (TG-CRGO) is not only more sensitive to annealing atmosphere than the thick-gauge grain-oriented silicon steel, but also requires a different annealing atmosphere. In this paper, the evolution of microstructures and textures in 0.18 mm TG-CRGO steel during high-temperature annealing in five different annealing atmospheres are detected through EBSD technique. The results show that excellent magnetic properties (B8=1.93 T) can be obtained when annealing atmosphere as 75%N2+25%H2 (volume ratio). Secondary recrystallization occurs in all the specimens that were prepared in five different annealing atmospheres, which causes significant differences in secondary recrystallized microstructures and textures. As N2 content rises, the average secondary recrystallized grain sizes increased and reaches a maximum average grain size in 75%N2 atmosphere and then decreases along with N2 content over 75%. When N2 content is 75%, Goss grains show preferential abnormal growth at 1050-1055 °C, which is a very narrow temperature range for secondary recrystallization. In conclusion, proper annealing atmosphere is one of the important measures to control and enable the grain-oriented silicon steel to get the sharp Goss texture.

  15. Nanocompositional Electron Microscopic Analysis and Role of Grain Boundary Phase of Isotropically Oriented Nd-Fe-B Magnets

    Directory of Open Access Journals (Sweden)

    Gregor A. Zickler

    2017-01-01

    Full Text Available Nanoanalytical TEM characterization in combination with finite element micromagnetic modelling clarifies the impact of the grain misalignment and grain boundary nanocomposition on the coercive field and gives guidelines how to improve coercivity in Nd-Fe-B based magnets. The nanoprobe electron energy loss spectroscopy measurements obtained an asymmetric composition profile of the Fe-content across the grain boundary phase in isotropically oriented melt-spun magnets and showed an enrichment of iron up to 60 at% in the Nd-containing grain boundaries close to Nd2Fe14B grain surfaces parallel to the c-axis and a reduced iron content up to 35% close to grain surfaces perpendicular to the c-axis. The numerical micromagnetic simulations on isotropically oriented magnets using realistic model structures from the TEM results reveal a complex magnetization reversal starting at the grain boundary phase and show that the coercive field increases compared to directly coupled grains with no grain boundary phase independently of the grain boundary thickness. This behaviour is contrary to the one in aligned anisotropic magnets, where the coercive field decreases compared to directly coupled grains with an increasing grain boundary thickness, if Js value is > 0.2 T, and the magnetization reversal and expansion of reversed magnetic domains primarily start as Bloch domain wall at grain boundaries at the prismatic planes parallel to the c-axis and secondly as Néel domain wall at the basal planes perpendicular to the c-axis. In summary our study shows an increase of coercive field in isotropically oriented Nd-Fe-B magnets for GB layer thickness > 5 nm and an average Js value of the GB layer < 0.8 T compared to the magnet with perfectly aligned grains.

  16. Tracking the Evolution of Annealing Textures from Individual Deformed Grains in a Cross-Rolled Non-oriented Electrical Steel

    Science.gov (United States)

    Sanjari, Mehdi; Mehdi, Mehdi; He, Youliang; Hilinski, Erik J.; Yue, Steve; Kestens, Leo A. I.; Edrisy, Afsaneh

    2017-12-01

    The evolution of microtexture and microstructure of a cross-rolled 0.88 wt pct Si non-oriented electrical steel was investigated using a quasi- in situ electron backscatter diffraction (EBSD) technique, where individual deformed grains with various initial orientations were tracked during annealing at the same temperature for different times. The textures recrystallized from different deformed grains were compared, and the observations were examined against the preferential nucleation and selective growth theories. Although the cold deformed 〈111〉//ND (normal direction) grains recrystallized first during annealing, they started with significantly different nucleation textures, i.e., γ-fiber (〈111〉//ND) in {111}〈112〉 deformed grains, and cube ({001}〈100〉) in {111}〈110〉 deformed grains. Both recrystallization textures were quite stable until the steel was completely recrystallized. Significant grain growth in these grains was only observed after the recrystallization was complete, which resulted in considerably different final textures as compared to the initial nucleation textures. Deformed grains with a rotated cube ({001}〈111〉) orientation were the last to recrystallize, and the recrystallization was accomplished mainly through the "invading" of neighboring grains into the deformed matrix. Analysis of the misorientations between the rotated cube grain (the matrix) and their neighboring recrystallized grains showed that the preferred growth of some of the grains can be attributed to the high grain boundary mobility associated with the coincident site lattices (CSL). During the course of recrystallization, some 11{h} and rotated cube grains also formed, but they disappeared quickly when the annealing time was increased.

  17. Grain coarsening in two-dimensional phase-field models with an orientation field.

    Science.gov (United States)

    Korbuly, Bálint; Pusztai, Tamás; Henry, Hervé; Plapp, Mathis; Apel, Markus; Gránásy, László

    2017-05-01

    In the literature, contradictory results have been published regarding the form of the limiting (long-time) grain size distribution (LGSD) that characterizes the late stage grain coarsening in two-dimensional and quasi-two-dimensional polycrystalline systems. While experiments and the phase-field crystal (PFC) model (a simple dynamical density functional theory) indicate a log-normal distribution, other works including theoretical studies based on conventional phase-field simulations that rely on coarse grained fields, like the multi-phase-field (MPF) and orientation field (OF) models, yield significantly different distributions. In a recent work, we have shown that the coarse grained phase-field models (whether MPF or OF) yield very similar limiting size distributions that seem to differ from the theoretical predictions. Herein, we revisit this problem, and demonstrate in the case of OF models [R. Kobayashi, J. A. Warren, and W. C. Carter, Physica D 140, 141 (2000)PDNPDT0167-278910.1016/S0167-2789(00)00023-3; H. Henry, J. Mellenthin, and M. Plapp, Phys. Rev. B 86, 054117 (2012)PRBMDO1098-012110.1103/PhysRevB.86.054117] that an insufficient resolution of the small angle grain boundaries leads to a log-normal distribution close to those seen in the experiments and the molecular scale PFC simulations. Our paper indicates, furthermore, that the LGSD is critically sensitive to the details of the evaluation process, and raises the possibility that the differences among the LGSD results from different sources may originate from differences in the detection of small angle grain boundaries.

  18. Grain coarsening in two-dimensional phase-field models with an orientation field

    Science.gov (United States)

    Korbuly, Bálint; Pusztai, Tamás; Henry, Hervé; Plapp, Mathis; Apel, Markus; Gránásy, László

    2017-05-01

    In the literature, contradictory results have been published regarding the form of the limiting (long-time) grain size distribution (LGSD) that characterizes the late stage grain coarsening in two-dimensional and quasi-two-dimensional polycrystalline systems. While experiments and the phase-field crystal (PFC) model (a simple dynamical density functional theory) indicate a log-normal distribution, other works including theoretical studies based on conventional phase-field simulations that rely on coarse grained fields, like the multi-phase-field (MPF) and orientation field (OF) models, yield significantly different distributions. In a recent work, we have shown that the coarse grained phase-field models (whether MPF or OF) yield very similar limiting size distributions that seem to differ from the theoretical predictions. Herein, we revisit this problem, and demonstrate in the case of OF models [R. Kobayashi, J. A. Warren, and W. C. Carter, Physica D 140, 141 (2000), 10.1016/S0167-2789(00)00023-3; H. Henry, J. Mellenthin, and M. Plapp, Phys. Rev. B 86, 054117 (2012), 10.1103/PhysRevB.86.054117] that an insufficient resolution of the small angle grain boundaries leads to a log-normal distribution close to those seen in the experiments and the molecular scale PFC simulations. Our paper indicates, furthermore, that the LGSD is critically sensitive to the details of the evaluation process, and raises the possibility that the differences among the LGSD results from different sources may originate from differences in the detection of small angle grain boundaries.

  19. 78 FR 65265 - Grain-Oriented Electrical Steel from the People's Republic of China: Initiation of Countervailing...

    Science.gov (United States)

    2013-10-31

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF COMMERCE... Investigation Initiation Checklist: Grain-Oriented Electrical Steel from the People's Republic of China (PRC CVD Initiation Checklist), at Attachment II, Analysis of Industry Support for the Petitions Covering Grain...

  20. Characterization of applied tensile stress using domain wall dynamic behavior of grain-oriented electrical steel

    Science.gov (United States)

    Qiu, Fasheng; Ren, Wenwei; Tian, Gui Yun; Gao, Bin

    2017-06-01

    Stress measurement that provides early indication of stress status has become increasingly demanding in the field of Non-destructive testing and evaluation (NDT&E). Bridging the correlation between micro magnetic properties and the applied tensile stress is the first conceptual step to come up with a new method of non-destructive testing. This study investigates the characterization of applied tensile stress with in-situ magnetic domain imaging and their dynamic behaviors by using magneto-optical Kerr effect (MOKE) microscopy assisted with magneto-optical indicator film (MOIF). Threshold magnetic field (TMF) feature to reflect 180 ° domain wall (DW) characteristics behaviors in different grains is proposed for stress detection. It is verified that TMF is a threshold feature with better sensitivity and brings linear correlation for stress characterization in comparison to classical coercive field, remanent magnetization, hysteresis loss and permeability parameters. The results indicate that 180 ° DWs dynamic in the inner grain is highly correlated with stress. The DW dynamics of turn over (TO) tests for different grains is studied to illustrate the repeatability of TMF. Experimental tests of high permeability grain oriented (HGO) electrical steels under stress loading have been conducted to verify this study.

  1. The role of grain boundary structure and crystal orientation on crack growth asymmetry in aluminum

    Energy Technology Data Exchange (ETDEWEB)

    Adlakha, I. [School for Engineering of Matter, Transport, and Energy, Arizona State University, Tempe, AZ 85287 (United States); Tschopp, M.A. [U.S. Army Research Laboratory, Aberdeen Proving Ground, MD 21005 (United States); Solanki, K.N., E-mail: kiran.solanki@asu.edu [School for Engineering of Matter, Transport, and Energy, Arizona State University, Tempe, AZ 85287 (United States)

    2014-11-17

    Atomistic simulations have shown that the grain boundary (GB) structure affects a number of physical, mechanical, thermal, and chemical properties, which can have a profound effect on macroscopic properties of polycrystalline materials. The research objective herein is to use atomistic simulations to explore the role that GB structure and the adjacent crystallographic orientations have on the directional asymmetry of an intergranular crack (i.e. cleavage behavior is favored along one direction, while ductile behavior along the other direction of the interface) for aluminum grain boundaries. Simulation results from seven 〈110〉 symmetric tilt grain boundaries (STGBs) show that the GB structure and the associated free volume directly influence the stress–strain response, crack growth rate, and crack tip plasticity mechanisms for middle-tension (M(T)) crack propagation specimens. In particular, the structural units present within the GB promote whether a dislocation or twinning-based mechanism operates at the crack tip during intergranular fracture along certain GBs (e.g., the ‘E’ structural unit promotes twinning at the crack tip in Al). Furthermore, the crystallography of the adjacent grains, and therefore the available slip planes, can significantly affect the crack growth rates in both directions of the crack – this creates a strong directional asymmetry in the crack growth rate in the Σ11 (113) and the Σ27 (552) STGBs. Upon comparing these results with the theoretical Rice criterion, it was found that certain GBs in this study (Σ9 (221), Σ11 (332) and Σ33 (441)) show an absence of directional asymmetry in the observed crack growth behavior, in conflict with the Rice criterion. The significance of the present research is that it provides a physical basis for the role of GB character and crystallographic orientation on intergranular crack tip deformation behavior.

  2. Tuning the Photocatalytic Activity of Anatase TiO2 Thin Films by Modifying the Preferred <001> Grain Orientation with Reactive DC Magnetron Sputtering

    Directory of Open Access Journals (Sweden)

    B. Stefanov

    2014-08-01

    Full Text Available Anatase TiO2 thin films were deposited by DC reactive magnetron sputtering on glass substrates at 20 mTorr pressure in a flow of an Ar and O2 gas mixture. The O2 partial pressure (PO2 was varied from 0.65 mTorr to 1.3 mTorr to obtain two sets of films with different stoichiometry. The structure and morphology of the films were characterized by secondary electron microscopy, atomic force microscopy, and grazing-angle X-ray diffraction complemented by Rietveld refinement. The as-deposited films were amorphous. Post-annealing in air for 1 h at 500 °C resulted in polycrystalline anatase film structures with mean grain size of 24.2 nm (PO2 = 0.65 mTorr and 22.1 nm (PO2 = 1.3 mTorr, respectively. The films sputtered at higher O2 pressure showed a preferential orientation in the <001> direction, which was associated with particle surfaces exposing highly reactive {001} facets. Films sputtered at lower O2 pressure exhibited no, or very little, preferential grain orientation, and were associated with random distribution of particles exposing mainly the thermodynamically favorable {101} surfaces. Photocatalytic degradation measurements using methylene blue dye showed that <001> oriented films exhibited approximately 30% higher reactivity. The measured intensity dependence of the degradation rate revealed that the UV-independent rate constant was 64% higher for the <001> oriented film compared to randomly oriented films. The reaction order was also found to be higher for <001> films compared to randomly oriented films, suggesting that the <001> oriented film exposes more reactive surface sites.

  3. Scattering from randomly oriented scatterers with strong permittivity fluctuations

    Science.gov (United States)

    Yueh, S. H.; Kong, J. A.; Shin, R. T.

    1990-01-01

    Strong permittivity fluctuation theory is used to solve the problem of scattering from a medium composed of completely randomly oriented scatterers under a low frequency limit. Gaussian statistics are not assumed for the renormalized scattering sources. Numerical results on effective permittivity are illustrated for oblate and prolate spheroidal scatterers and compared with the results for spherical scatterers. The results are consistent with discrete scatterer theory. The effective permittivity of a random medium embedded with nonspherical scatterers shows a higher imaginary part than the spherical scatterer case with equal correlation volume. Under the distorted Born approximation, the polarimetric covariance matrix for the backscattered electric field is calculated for half-space randomly oriented scatterers. The nonspherical geometry of the scatterers shows significant effects on the cross-polarized backscattering returns, and the correlation coefficient between HH and VV returns. The polarimetric backscattering coefficients can provide useful information in distinguishing the geometry of scatterers.

  4. Strain Amount Dependent Grain Size and Orientation Developments during Hot Compression of a Polycrystalline Nickel Based Superalloy

    Directory of Open Access Journals (Sweden)

    Guoai He

    2017-02-01

    Full Text Available Controlling grain size in polycrystalline nickel base superalloy is vital for obtaining required mechanical properties. Typically, a uniform and fine grain size is required throughout forging process to realize the superplastic deformation. Strain amount occupied a dominant position in manipulating the dynamic recrystallization (DRX process and regulating the grain size of the alloy during hot forging. In this article, the high-throughput double cone specimen was introduced to yield wide-range strain in a single sample. Continuous variations of effective strain ranging from 0.23 to 1.65 across the whole sample were achieved after reaching a height reduction of 70%. Grain size is measured to be decreased from the edge to the center of specimen with increase of effective strain. Small misorientation tended to generate near the grain boundaries, which was manifested as piled-up dislocation in micromechanics. After the dislocation density reached a critical value, DRX progress would be initiated at higher deformation region, leading to the refinement of grain size. During this process, the transformations from low angle grain boundaries (LAGBs to high angle grain boundaries (HAGBs and from subgrains to DRX grains are found to occur. After the accomplishment of DRX progress, the neonatal grains are presented as having similar orientation inside the grain boundary.

  5. Effect of specimen size and grain orientation on the mechanical and physical properties of NBG-18 nuclear graphite

    Energy Technology Data Exchange (ETDEWEB)

    Vasudevamurthy, G. [Mechanical & Nuclear Engineering, Virginia Commonwealth University, Richmond, VA (United States); Byun, T.S. [Materials Science & Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37838 (United States); Pappano, P. [Office of Fusion Energy, Department of Energy, Gaithersburg, MD (United States); Snead, L.L.; Burchell, T.D. [Materials Science & Technology Division, Oak Ridge National Laboratory, Oak Ridge, TN 37838 (United States)

    2015-07-15

    We present here a comparison of the measured baseline mechanical and physical properties of with grain (WG) and against grain (AG) non-ASTM size NBG-18 graphite. The objectives of the experiments were twofold: (1) assess the variation in properties with grain orientation; (2) establish a correlation between specimen tensile strength and size. The tensile strength of the smallest sized (4 mm diameter) specimens were about 5% higher than the standard specimens (12 mm diameter) but still within one standard deviation of the ASTM specimen size indicating no significant dependence of strength on specimen size. The thermal expansion coefficient and elastic constants did not show significant dependence on specimen size. Experimental data indicated that the variation of thermal expansion coefficient and elastic constants were still within 5% between the different grain orientations, confirming the isotropic nature of NBG-18 graphite in physical properties.

  6. Effect of specimen size and grain orientation on the mechanical and physical properties of NBG-18 nuclear graphite

    Energy Technology Data Exchange (ETDEWEB)

    Vasudevamurthy, Gokul [Virginia Commonwealth Univ., Richmond, VA (United States); Byun, Thak Sang [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pappano, Pete [USDOE Office of Fusion Energy, Gaithersburg, MD (United States); Snead, Lance L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Burchell, Tim D. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-03-13

    We present here a comparison of the measured baseline mechanical and physical properties of with grain (WG) and against grain (AG) non-ASTM size NBG-18 graphite. The objectives of the experiments were twofold: (1) assess the variation in properties with grain orientation; (2) establish a correlation between specimen tensile strength and size. The tensile strength of the smallest sized (4 mm diameter) specimens were about 5% higher than the standard specimens (12 mmdiameter) but still within one standard deviation of the ASTM specimen size indicating no significant dependence of strength on specimen size. The thermal expansion coefficient and elastic constants did not show significant dependence on specimen size. Experimental data indicated that the variation of thermal expansion coefficient and elastic constants were still within 5% between the different grain orientations, confirming the isotropic nature of NBG-18 graphite in physical properties.

  7. Effects of DC bias on magnetic performance of high grades grain-oriented silicon steels

    Science.gov (United States)

    Ma, Guang; Cheng, Ling; Lu, Licheng; Yang, Fuyao; Chen, Xin; Zhu, Chengzhi

    2017-03-01

    When high voltage direct current (HVDC) transmission adopting mono-polar ground return operation mode or unbalanced bipolar operation mode, the invasion of DC current into neutral point of alternating current (AC) transformer will cause core saturation, temperature increasing, and vibration acceleration. Based on the MPG-200D soft magnetic measurement system, the influence of DC bias on magnetic performance of 0.23 mm and 0.27 mm series (P1.7=0.70-1.05 W/kg, B8>1.89 T) grain-oriented (GO) silicon steels under condition of AC / DC hybrid excitation were systematically realized in this paper. For the high magnetic induction GO steels (core losses are the same), greater thickness can lead to stronger ability of resisting DC bias, and the reasons for it were analyzed. Finally, the magnetostriction and A-weighted magnetostriction velocity level of GO steel under DC biased magnetization were researched.

  8. Evolution of grain sizes and orientations during phase transitions in hydrous Mg2SiO4

    Science.gov (United States)

    Rosa, Angelika D.; Hilairet, Nadège; Ghosh, Sujoy; Perrillat, Jean-Philippe; Garbarino, Gaston; Merkel, Sébastien

    2016-10-01

    Transformation microstructures in mantle minerals, such as (Mg,Fe)2SiO4, are critical for predicting the rheological properties of rocks and the interpretation of seismic observations. We present in situ multigrain X-ray diffraction experiments on hydrous Mg2SiO4 at the P/T conditions relevant for deep cold subducting slabs (up to 40 GPa and 850°C) at a low experimental strain rate ( 4 * 10-6s-1). We monitor the orientations of hundreds of grains and grain size variations during the series of α-β-γ (forsterite-wadsleyite-ringwoodite) phase transformations. Microtextural results indicate that the β and an intermediate γ* phase grow incoherently relatively to the host α phase consistent with a nucleation and growth model. The β and γ phases exhibit orientation relationships which are in agreement with previous ex situ observations. The β and intermediate γ* show texturing due to moderate differential stress in the sample. Both the α-β and α-γ transformation induce significant reductions of the mean sample grain size of up to 90% that starts prior to the appearance of the daughter phase. Apart from the γ*, in the newly formed β and γ phases, the nucleation rate is faster than the growth rate, inhibiting the formation of large grains. These results on grain orientations and grain size reductions in relation to transformation kinetics should allow refining existing slab strength models.

  9. Superlocalization and Formation of Grain Structure in Ni3ge Single Crystals with Different Orientations of Deformation Axes

    Science.gov (United States)

    Solov'eva, Yu. V.; Lipatnikova, Ya. D.; Starenchenko, S. V.; Solov'ev, A. N.; Starenchenko, V. A.

    2017-09-01

    The paper describes the influence of orientation of Ni3Ge single crystal deformation axes on the high-temperature superlocalization of plastic deformation. Mechanical properties of single crystals with different orientations are studied in this paper as well as the slip traces and the evolution of the dislocation structure. Based on these investigations, the observing conditions are described for the superlocalization bands and the formation of the grain structure in local areas of the original single crystal.

  10. 78 FR 75332 - Grain-Oriented Electrical Steel From the People's Republic of China: Postponement of Preliminary...

    Science.gov (United States)

    2013-12-11

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF COMMERCE International Trade Administration Grain-Oriented Electrical Steel From the People's Republic of China: Postponement of Preliminary Determination in the Countervailing Duty Investigation AGENCY: Enforcement and Compliance, formerly Import Administration,...

  11. 78 FR 65283 - Grain-Oriented Electrical Steel From the People's Republic of China, the Czech Republic, Germany...

    Science.gov (United States)

    2013-10-31

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF COMMERCE... like product analysis in this case, see Antidumping Duty Investigation Initiation Checklist: Grain-Oriented Electrical Steel from the People's Republic of China (PRC AD Initiation Checklist), at Attachment...

  12. A DETERMINATION OF THE FLUX DENSITY IN CORE OF DISTRIBUTION TRANSFORMERS, WHAT BUILT WITH THE COMMON USING OF GRAIN AND NON GRAIN ORIENTED MAGNETIC STEELS

    Directory of Open Access Journals (Sweden)

    I.V. Pentegov

    2015-12-01

    Full Text Available Purpose. The development of calculation method to determinate the flux densities in different parts of the magnetic cores of distribution transformers, what built from different types magnetic steel (mixed core. Methodology. The method is based on the scientific positions of Theoretical Electrical Engineering – the theory of the electromagnetic field in nonlinear mediums to determine the distribution of magnetic flux in mixed core of transformer, what are using different types of steel what have the different magnetic properties. Results. The developed method gives possible to make calculation of the flux density and influence of skin effect in different parts of the magnetic cores of distribution transformer, where are used mix of grain oriented (GO and non grain oriented (NGO steels. Was determinate the general basic conditions for the calculation of flux density in the laminations from grain and non grain oriented steels of the magnetic core: the strength of magnetic field for the laminations of particular part of mixed core is the same; the sum of the magnetic fluxes in GO and NGO steels in particular part of mixed core is equal with the designed magnetic flux in this part of mixed core. Discover, the magnetic flux in mixed core of the transformer has specific distribution between magnetic steels. The flux density is higher in laminations from GO steel and smaller in laminations from the NGO steel. That is happened because for magnetic flux is easier pass through laminations from GO steel, what has better magnetic conductance than laminations from NGO steel. Originality. The common using of different types of magnetic steels in cores for distribution transformers gives possibility to make design of transformer with low level of no load losses, high efficiency and with optimal cost. Practical value. The determination of the flux density in different parts of magnetic core with GO and NGO steels gives possibility make accurate calculation of

  13. Failure process in heterogeneous materials with randomly oriented fibers

    Science.gov (United States)

    Sbiaai, H.; Hader, A.; Bakir, R.; Achik, I.; Tarras, I.; Boughaleb, Y.

    2017-06-01

    Our aim in this study is to investigate the failure process in heterogeneous materials with randomly oriented fibers. In our proposed system, the fiber bundle model assumes that all the fibers are randomly oriented in all directions relative to the vertical one. Our calculations are performed in the framework of the local load-sharing rule, which states that the applied load of a broken fiber is redistributed only to its neighboring ones. The results show that this system presents a greater resistance than the classical one where the fibers are arranged parallel to the applied load. We found that the density of the broken fibers exhibited a power law and was linearly correlated with the applied load and temperature. However, the results show that the failure process of the considered system is characterized by an avalanche phenomenon with two different regimes. We also studied the crossover behavior of lifetime of the materials versus both applied load and temperature. We compared these results with those obtained from the classical model.

  14. Influence of Substrate on Crystal Orientation of Large-Grained Si Thin Films Formed by Metal-Induced Crystallization

    Directory of Open Access Journals (Sweden)

    Kaoru Toko

    2015-01-01

    Full Text Available Producing large-grained polycrystalline Si (poly-Si film on glass substrates coated with conducting layers is essential for fabricating Si thin-film solar cells with high efficiency and low cost. We investigated how the choice of conducting underlayer affected the poly-Si layer formed on it by low-temperature (500°C Al-induced crystallization (AIC. The crystal orientation of the resulting poly-Si layer strongly depended on the underlayer material: (100 was preferred for Al-doped-ZnO (AZO and indium-tin-oxide (ITO; (111 was preferred for TiN. This result suggests Si heterogeneously nucleated on the underlayer. The average grain size of the poly-Si layer reached nearly 20 µm for the AZO and ITO samples and no less than 60 µm for the TiN sample. Thus, properly electing the underlayer material is essential in AIC and allows large-grained Si films to be formed at low temperatures with a set crystal orientation. These highly oriented Si layers with large grains appear promising for use as seed layers for Si light-absorption layers as well as for advanced functional materials.

  15. Microstructure of TiN coatings synthesized by direct pulsed Nd:YAG laser nitriding of titanium: Development of grain size, microstrain, and grain orientation

    Science.gov (United States)

    Höche, D.; Schikora, H.; Zutz, H.; Queitsch, R.; Emmel, A.; Schaaf, P.

    2008-05-01

    Pure titanium was irradiated by pulsed Nd:YAG laser irradiation in nitrogen atmosphere. As a result, nitrogen uptake and diffusion occurred and a TiN layer was synthesized at the titanium surface. These TiN coatings were analyzed by X-ray diffraction and the diffraction patterns were investigated in detail, in order to obtain more information about the physical processes during the coating formation. The diffraction peaks were fitted by Pearson VII profiles and the grain size and the microstrain were determined by the analysis of line broadening and peak shifts, using the Williamson-Hall and the Warren-Averbach formalisms. Additional single-line analyses were performed by means of the method of Langford and Keijser to obtain information about the preferred grain orientation and the texture development. The maximum grain size was about 100 nm and a corresponding average lattice strain of 0.002 was found. A relation between the treatment parameters and the coating properties, such as grain size and microstrain, can be shown. Thus, it was possible to determine optimal scan parameters for material processing and to establish the physical limits of the coating properties.

  16. A semi-empirical approximation of static hysteresis for high flux densities in highly grain-oriented silicon iron

    Science.gov (United States)

    Carrander, C.; Engdahl, G.

    2017-10-01

    In calculations and simulations regarding magnetic materials, it is important to have a have an accurate model of the hysteresis loop. The major loop, in particular, is used in many simulations. However, it is generally not possible to measure the true major loop, and it must therefore be approximated using a minor loop. There are several methods available for approximating magnetization curves, but they are primarily designed for paramagnetic materials, and are poorly suited to the highly grain-oriented steels used in modern transformers. Therefore, we propose two expressions for approximating the magnetization curves of grain-oriented silicon-iron steels. Both methods give close agreement with measurements and can be extrapolated to in order to describe the major loop.

  17. CREATION OF EXPORT-ORIENTED NETWORK OF GRAIN ELEVATORS IN UKRAINE

    Directory of Open Access Journals (Sweden)

    D. M. Kozachenko

    2017-04-01

    Full Text Available Purpose. The scientific paper highlights improving the efficiency of export rail transportation of grain cargoes in Ukraine by introducing shipper routing and concentration of loading at the terminal grain elevators. Methodology. According to the experience of the USA and Canada, one of the most effective ways to reduce costs in the grain to-port supply chain is a shipper routing of the rail traffic. Shipper routing for transportation of grain cargoes involves the concentration of their loading on the multiple junctions. The junctions are proposed to be selected with the use of cluster analysis methods. For the formation of the grain loading concentration areas the authors used methods of set theory and multi-criteria optimization. Findings. Based on agglomerative cluster analysis algorithm, the junctions on a network of Ukrainian railways are selected and the areas of possible concentration of grain loading are formed. DSU-algorithm allowed distinguishing the overlapping and non-overlapping areas of concentration. The problem of selecting non-overlapping areas of the grain loading concentration is formalized as the problem of multiobjective integer programming with boolean variables. The solution of this problem by a modified simplex algorithm allows selecting on the railway network of Ukraine 24 districts of possible grain loading concentration, which cover 70 stations and at minimal additional cost provide routing of about 7.5 million tons of grain per year. Originality. The originality of the work lies in the fact that the authors developed the mathematical procedure for selection of junctions and concentration areas of grain loading at the Ukrainian railway network, taking into account the economic efficiency of the process. Practicalvalue. Application of the developed method of grain loading concentration for the formation of unit trains will significantly reduce the logistics costs in the supply chain of grain to Ukrainian ports for

  18. A novel ultra-low carbon grain oriented silicon steel produced by twin-roll strip casting

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yang, E-mail: wy069024019@163.com [State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819 (China); Zhang, Yuan-Xiang; Lu, Xiang; Fang, Feng; Xu, Yun-Bo; Cao, Guang-Ming; Li, Cheng-Gang [State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819 (China); Misra, R.D.K. [Laboratory for Excellence in Advanced Steel Research, Department of Metallurgical, Materials and Biomedical Engineering, University of Texas at El Paso, TX 79968 (United States); Wang, Guo-Dong [State Key Laboratory of Rolling and Automation, Northeastern University, Shenyang 110819 (China)

    2016-12-01

    A novel ultra-low carbon grain oriented silicon steel was successfully produced by strip casting and two-stage cold rolling method. The microstructure, texture and precipitate evolution under different first cold rolling reduction were investigated. It was shown that the as-cast strip was mainly composed of equiaxed grains and characterized by very weak Goss texture ({110}<001>) and λ-fiber (<001>//ND). The coarse sulfides of size ~100 nm were precipitated at grain boundaries during strip casting, while nitrides remained in solution in the as-cast strip and the fine AlN particles of size ~20–50 nm, which were used as grain growth inhibitors, were formed in intermediate annealed sheet after first cold rolling. In addition, the suitable Goss nuclei for secondary recrystallization were also formed during intermediate annealing, which is totally different from the conventional process that the Goss nuclei originated in the subsurface layer of the hot rolled sheet. Furthermore, the number of AlN inhibitors and the intensity of desirable Goss texture increased with increasing first cold rolling reduction. After secondary recrystallization annealing, very large grains of size ~10–40 mm were formed and the final magnetic induction, B{sub 8}, was as high as 1.9 T. - Highlights: • A novel chemical composition base on strip casting silicon steel was proposed. • The ultra-low carbon design could shorten the processing routes. • The novel composition and processes were beneficial to obtain more inhibitors. • The magnetic induction of grain oriented silicon steel was significantly improved.

  19. Reconstruction of Single-Grain Orientation Distribution Functions for Crystalline Materials

    DEFF Research Database (Denmark)

    Hansen, Per Christian; Sørensen, Henning Osholm; Sükösd, Zsuzsanna

    2009-01-01

    for individual grains of the material in consideration. We study two iterative large-scale reconstruction algorithms, the algebraic reconstruction technique (ART) and conjugate gradients for least squares (CGLS), and demonstrate that right preconditioning is necessary in both algorithms to provide satisfactory...

  20. Effect of Primary Dendrite Orientation on Stray Grain Formation in Cross-Section Change Region During the Directional Solidification of Ni-Based Superalloy

    Science.gov (United States)

    Xuan, Weidong; Li, Chuantao; Zhao, Dengke; Wang, Baojun; Li, Chuanjun; Ren, Zhongming; Zhong, Yunbo; Li, Xi; Cao, Guanghui

    2017-02-01

    The effect of primary dendrite orientation on stray grain formation in a cross-section change region during the directional solidification of Ni-based superalloy is investigated through both experimental observations and numerical simulation. The results clearly show that the orientation of primary dendrite affects the formation of stray grains in the cross-section change region. It is observed that, for the primary dendrite without misorientation, no stray grain is formed in the cross-section change region; for the primary dendrite with a moderate misorientation (15 deg), stray grains are formed only on the side converging from the mold wall in the cross-section change region. When the misorientation is 25 deg, stray grains are formed on both the side converging from the mold wall and the side diverging from the mold wall in the cross-section change region (the converging side and the diverging side for short). The simulation results are in accordance with experimental results. Furthermore, the correlation among factors such as stray grain formation, primary dendrite orientation, and withdrawal velocity has been analyzed. The mechanism of stray grain formation in various oriented primary dendrites is discussed.

  1. Fine-Grained Forward-Secure Signature Schemes without Random Oracles

    DEFF Research Database (Denmark)

    Camenisch, Jan; Koprowski, Maciej

    2006-01-01

    We propose the concept of fine-grained forward-secure signature schemes. Such signature schemes not only provide nonrepudiation w.r.t. past time periods the way ordinary forward-secure signature schemes do but, in addition, allow the signer to specify which signatures of the current time period...... remain valid when revoking the public key. This is an important advantage if the signer produces many signatures per time period as otherwise the signer would have to re-issue those signatures (and possibly re-negotiate the respective messages) with a new key.Apart from a formal model for fine......-grained forward-secure signature schemes, we present practical schemes and prove them secure under the strong RSA assumption only, i.e., we do not resort to the random oracle model to prove security. As a side-result, we provide an ordinary forward-secure scheme whose key-update time is significantly smaller than...

  2. Effect of annealing atmosphere on secondary recrystallization in thin-gauge grain-oriented silicon steel: evolution of inhibitors

    Science.gov (United States)

    Yang, Fu-yao; He, Cheng-xu; Meng, Li; Ma, Guang; Chen, Xin; Mao, Wei-min

    2017-10-01

    Thin-gauge cold-rolled grain-oriented (TG-CRGO) silicon steels were fabricated using the acquired inhibitor method, in which the behaviors of inhibitor are strongly influenced by the final annealing atmosphere and differ from that of the TG-CRGO silicon steel. In this study, macrostructures, grain orientations, and evolution of inhibitors in two gauges of thickness (0.23 and 0.18 mm) of steels were studied and compared in five different annealing atmospheres. The second-phase particles in samples were observed by field-emission scanning electron microscopy. Distribution densities and mean diameter of particles were statistically calculated to illustrate the effect of Zener factor. Results indicated that the inhibitor behaviors in the two thickness samples are similar with the change of N2 proportion in annealing atmosphere, i.e., nitrogen loss, decomposition, coalescence, and ripening of particles would be strongly suppressed with the increase of N2 content. However, in comparison with the 0.23-mm samples, the nitride precipitation, decomposition and inhibitor coarsening of the 0.18-mm specimens are more likely to occur at a lower temperature because of the thinner thickness. Furthermore, the value of Zener factor implies that for thinner samples, more N2 should be employed when nitrides are used the main inhibitor; this condition would inhibit the development of undesirable deviated Goss grains. This study showed that the 0.23-mm sample could achieve the best magnetic properties (B8) at 1.92 T in the atmosphere containing 25% N2. The 0.18-mm sample could achieve the best magnetic properties (B8) at 1.93 T in the atmosphere containing 75% N2.

  3. Sensitivity analysis of Immersed Boundary Method simulations of fluid flow in dense polydisperse random grain packings

    Directory of Open Access Journals (Sweden)

    Knight Chris

    2017-01-01

    Full Text Available Polydisperse granular materials are ubiquitous in nature and industry. Despite this, knowledge of the momentum coupling between the fluid and solid phases in dense saturated grain packings comes almost exclusively from empirical correlations [2–4, 8] with monosized media. The Immersed Boundary Method (IBM is a Computational Fluid Dynamics (CFD modelling technique capable of resolving pore scale fluid flow and fluid-particle interaction forces in polydisperse media at the grain scale. Validation of the IBM in the low Reynolds number, high concentration limit was performed by comparing simulations of flow through ordered arrays of spheres with the boundary integral results of Zick and Homsy [10]. Random grain packings were studied with linearly graded particle size distributions with a range of coefficient of uniformity values (Cu = 1.01, 1.50, and 2.00 at a range of concentrations (ϕ ∈ [0.396; 0.681] in order to investigate the influence of polydispersity on drag and permeability. The sensitivity of the IBM results to the choice of radius retraction parameter [1] was investigated and a comparison was made between the predicted forces and the widely used Ergun correlation [3].

  4. Sensitivity analysis of Immersed Boundary Method simulations of fluid flow in dense polydisperse random grain packings

    Science.gov (United States)

    Knight, Chris; Abdol Azis, Mohd Hazmil; O'Sullivan, Catherine; van Wachem, Berend; Dini, Daniele

    2017-06-01

    Polydisperse granular materials are ubiquitous in nature and industry. Despite this, knowledge of the momentum coupling between the fluid and solid phases in dense saturated grain packings comes almost exclusively from empirical correlations [2-4, 8] with monosized media. The Immersed Boundary Method (IBM) is a Computational Fluid Dynamics (CFD) modelling technique capable of resolving pore scale fluid flow and fluid-particle interaction forces in polydisperse media at the grain scale. Validation of the IBM in the low Reynolds number, high concentration limit was performed by comparing simulations of flow through ordered arrays of spheres with the boundary integral results of Zick and Homsy [10]. Random grain packings were studied with linearly graded particle size distributions with a range of coefficient of uniformity values (Cu = 1.01, 1.50, and 2.00) at a range of concentrations (ϕ ∈ [0.396; 0.681]) in order to investigate the influence of polydispersity on drag and permeability. The sensitivity of the IBM results to the choice of radius retraction parameter [1] was investigated and a comparison was made between the predicted forces and the widely used Ergun correlation [3].

  5. Substituting whole grains for refined grains in a 6-wk randomized trial favorably affects energy-balance metrics in healthy men and postmenopausal women.

    Science.gov (United States)

    Karl, J Philip; Meydani, Mohsen; Barnett, Junaidah B; Vanegas, Sally M; Goldin, Barry; Kane, Anne; Rasmussen, Helen; Saltzman, Edward; Vangay, Pajau; Knights, Dan; Chen, C-Y Oliver; Das, Sai Krupa; Jonnalagadda, Satya S; Meydani, Simin N; Roberts, Susan B

    2017-03-01

    Background: The effect of whole grains on the regulation of energy balance remains controversial.Objective: We aimed to determine the effects of substituting whole grains for refined grains, independent of body weight changes, on energy-metabolism metrics and glycemic control.Design: The study was a randomized, controlled, parallel-arm controlled-feeding trial that was conducted in 81 men and postmenopausal women [49 men and 32 women; age range: 40-65 y; body mass index (in kg/m(2)): Energy metabolism and body-composition metrics, appetite, markers of glycemic control, and gut microbiota were measured at 2 and 8 wk.Results: By design, body weight was maintained in both groups. Plasma alkylresorcinols, which are biomarkers of whole-grain intake, increased in the whole grain-rich diet group (WG) but not in the refined grain-based diet group (RG) (P-diet-by-time interaction energy content (57 ± 17 kcal/d; P = 0.003), but not in stool energy density, were higher in the WG. When combined, the favorable energetic effects in the WG translated into a 92-kcal/d (95% CI: 28, 156-kcal/d) higher net daily energy loss compared with that of the RG (P = 0.005). Prospective consumption (P = 0.07) and glycemia after an oral-glucose-tolerance test (P = 0.10) trended toward being lower in the WG than in the RG. When nonadherent participants were excluded, between-group differences in stool energy content and glucose tolerance increased, and between-group differences in the RMR and prospective consumption were not statistically significant.Conclusion: These findings suggest positive effects of whole grains on the RMR and stool energy excretion that favorably influence energy balance and may help explain epidemiologic associations between whole-grain consumption and reduced body weight and adiposity. This trial was registered at clinicaltrials.gov as NCT01902394. © 2017 American Society for Nutrition.

  6. The Performance and Deformation Behavior of Oriented Columnar-Grained Tungsten Polycrystalline Penetrators

    Science.gov (United States)

    1998-05-01

    who designed and built the reverse ballistic test fixture. • Dr. Larry Murr and Mr. S. Pappu of the University of Texas, El Paso, who examined one of...tungsten processing facility at Picatinny Arsenal, Dover, NJ, and by Murr and Pappu (1997) at the University of Texas, El Paso. In section 5, the flow...the coincidence of twin reflections and matrix reflections for several common orientations in body-centered cubic (BCC) materials (Murr and Pappu

  7. Robotic virtual reality simulation plus standard robotic orientation versus standard robotic orientation alone: a randomized controlled trial.

    Science.gov (United States)

    Vaccaro, Christine M; Crisp, Catrina C; Fellner, Angela N; Jackson, Christopher; Kleeman, Steven D; Pavelka, James

    2013-01-01

    The objective of this study was to compare the effect of virtual reality simulation training plus robotic orientation versus robotic orientation alone on performance of surgical tasks using an inanimate model. Surgical resident physicians were enrolled in this assessor-blinded randomized controlled trial. Residents were randomized to receive either (1) robotic virtual reality simulation training plus standard robotic orientation or (2) standard robotic orientation alone. Performance of surgical tasks was assessed at baseline and after the intervention. Nine of 33 modules from the da Vinci Skills Simulator were chosen. Experts in robotic surgery evaluated each resident's videotaped performance of the inanimate model using the Global Rating Scale (GRS) and Objective Structured Assessment of Technical Skills-modified for robotic-assisted surgery (rOSATS). Nine resident physicians were enrolled in the simulation group and 9 in the control group. As a whole, participants improved their total time, time to incision, and suture time from baseline to repeat testing on the inanimate model (P = 0.001, 0.003, virtual reality simulation improve surgical skills on an inanimate model, although this may be a function of the initial "practice" on the inanimate model and repeat testing of a known task. However, robotic virtual reality simulation training increases GRS pass rates consistent with improved robotic technical skills learned in a virtual reality environment.

  8. Influence of MgO containing strontium on the structure of ceramic film formed on grain oriented silicon steel surface

    Directory of Open Access Journals (Sweden)

    Vasconcelos Daniela C. Leite

    1999-01-01

    Full Text Available The oxide layer formed on the surface of a grain oriented silicon steel was characterized by SEM and EDS. 3% Si steel substrates were coated by two types of slurries: one formed by MgO and water and other formed by MgO, water and SrSO4. The ceramic films were evaluated by SEM, EDS and X-ray diffraction. Depth profiles of Fe, Si and Mg were obtained by GDS. The magnetic core losses (at 1.7 Tesla, 60 Hz of the coated steel samples were evaluated as well. The use of MgO containing strontium reduced the volume fraction of forsterite particles beneath the outermost ceramic layer. It was observed a reduced magnetic core loss with the use of the slurry with MgO containing strontium.

  9. Orthogonal decomposition of core loss along rolling and transverse directions of non-grain oriented silicon steels

    Science.gov (United States)

    Wan, Xuezhi; Li, Yongjian; Li, Jingsong; Liu, Chengcheng; Zhu, Jianguo

    2017-05-01

    Rotational core loss of the silicon steel laminations are measured under elliptical rotating excitation. The core loss decomposition model is very important in magnetic core design, in which the decomposition coefficients are calculated through the measurement data. By using the transformation of trigonometric function, the elliptical rotational magnetic flux can be decomposed into two parts along two directions. It is assumed that the rotating core loss is the sum of alternating core losses along rolling and transverse directions. The magnetic strength vector H of non-grain oriented (NGO) silicon steel 35WW270 along rolling and transverse directions is measured by a novel designed 3-D magnetic properties tester. Alternating core loss along the rolling, transverse directions and rotating core loss in the xoy-plane of this specimen in different frequencies such as 50 Hz, 100 Hz, and 200 Hz. Experimental results show that the core loss model is more accurate and useful to predict the total core loss.

  10. Modeling grain orientation of DP600 steel by Nd:YAG laser

    Directory of Open Access Journals (Sweden)

    Liu Shibo

    2016-01-01

    Full Text Available A FE-CA (Finite Element-Cellular Automaton model is built to simulate the microstructure evaluation during laser welding of DP600 high strength steel. A moving conical heat source is performed in ABAQUS to achieve temperature field during welding. A linear interpolation method is used to transfer node temperature of ABAQUS to cell temperature of Cellular Automaton. With the consideration of temperature and solute concentration, the solidification of DP600 after weld is simulated. The established FE-CA model can simulate 2D equiaxed and column dendrite grain growth. The competitive growth between different dendrite arms is presented. The weld microstructure simulation result shows good agreement with experiment results.

  11. Microstructure and crystallographic preferred orientation of polycrystalline microgarnet aggregates developed during progressive creep, recovery, and grain boundary sliding

    Science.gov (United States)

    Massey, M.A.; Prior, D.J.; Moecher, D.P.

    2011-01-01

    Optical microscopy, electron probe microanalysis, and electron backscatter diffraction methods have been used to examine a broad range of garnet microstructures within a high strain zone that marks the western margin of a major transpression zone in the southern New England Appalachians. Garnet accommodated variable states of finite strain, expressed as low strain porphyroclasts (Type 1), high strain polycrystalline aggregates (Type 2), and transitional morphologies (Type 3) that range between these end members. Type 1 behaved as rigid porphyroclasts and is characterized by four concentric Ca growth zones. Type 2 help define foliation and lineation, are characterized by three Ca zones, and possess a consistent bulk crystallographic preferred orientation of (100) symmetrical to the tectonic fabric. Type 3 show variable degrees of porphyroclast associated with aggregate, where porphyroclasts display complex compositional zoning that corresponds to lattice distortion, low-angle boundaries, and subgrains, and aggregate CPO mimics porphyroclast orientation. All aggregates accommodated a significant proportion of greenschist facies deformation through grain boundary sliding, grain rotation and impingement, and pressure solution, which lead to a cohesive behavior and overall strain hardening of the aggregates. The characteristic CPO could not have been developed in this manner, and was the result of an older phase of partitioned amphibolite facies dislocation creep, recovery including chemical segregation, and recrystallization of porphyroclasts. This study demonstrates the significance of strain accommodation within garnet and its affect on composition under a range of PT conditions, and emphasizes the importance of utilizing EBSD methods with studies that rely upon a sound understanding of garnet. ?? 2010 Elsevier Ltd.

  12. Characterization of Large Grain Nb Ingot Microstructure Using OIM and Laue Methods

    Energy Technology Data Exchange (ETDEWEB)

    D. Kang, D.C. Baars, T.R. Bieler, G. Ciovati, C. Compton, T.L. Grimm, A.A. Kolka

    2011-07-01

    Large grain niobium is being examined for fabricating superconducting radiofrequency cavities as an alternative to using rolled sheet with fine grains. It is desirable to know the grain orientations of a niobium ingot slice before fabrication, as this allows heterogeneous strain and surface roughness effects arising from etching to be anticipated. Characterization of grain orientations has been done using orientation imaging microscopy (OIM), which requires destructive extraction of pieces from an ingot slice. Use of a Laue camera allows nondestructive characterization of grain orientations, a process useful for evaluating slices and deformation during the manufacturing process. Five ingot slices from CBMM, Ningxia, and Heraeus are compared. One set of slices was deformed into a half cell and the deformation processes that cause crystal rotations have been investigated and compared with analytical predictions. The five ingot slices are compared in terms of their grain orientations and grain boundary misorientations, indicating no obvious commonalities, which suggests that grain orientations develop randomly during solidification.

  13. Mechanism of competitive grain growth in a curvilinear channel of crystal-sorter during the orientational solidification of nickel-based heat-resistant alloy

    Science.gov (United States)

    Monastyrskiy, V. P.; Pozdnyakov, A. N.; Ershov, M. Yu.; Monastyrskiy, A. V.

    2017-07-01

    Using numerical simulation in the ProCAST program complex, the conditions of the solidification of heat-resistant nickel alloy in curvilinear channels of a ceramic mold have been investigated. It has been shown that, in practically important cases, the vector of the temperature gradient is oriented along the axis of the curvilinear channel. In a spiral crystal selector, a cyclic change in the preferred direction of growth occurs because of the cyclic change in the direction of the vector of the temperature gradient. The fact that the vector of the temperature gradient is almost always directed along the axis of the curvilinear channel makes it possible to govern the orientation of the vector of the temperature gradient in space and, therefore, to obtain a grain with the preferred crystallographic orientation. Based on the results of this investigation, a method of the grain selection with a desired azimuthal orientation is proposed.

  14. [Randomized controlled study on chronic functional constipation treated with grain-shaped moxibustion and acupuncture].

    Science.gov (United States)

    Wang, Li-juan; Wang, Ling-ling

    2011-04-01

    To compare the therapeutic effect differences of chronic functional constipation treated with the combined therapy of grain-shaped moxibustion and acupuncture and simple acupuncture therapy. One hundred cases of constipation were randomly divided into an acupuncture and moxibustion group and an acupuncture group by fifty-fifty. Both groups were treated by acupuncture therapy with acupoints of two groups alternatively. Group 1: Tianshu (ST 25), Daheng (SP 15), Qihai (CV 6), Guanyuan (CV 4), Zusanli (ST 36), Shangjuxu (ST 37) and Sanyinjiao (SP 6). Group 2: Zhongliao (BL 33), Xialiao (BL 34), Dachangshu (BL 25), Shenshu (BL 23) and Pishu (BL 20). In acupuncture group, all the acupoints, were punctured; in acupuncture and moxibustion group, grain-shaped moxibustion was given at Qihai (CV 6), Susanli (ST 36), Dachangshu (BL 25) and Pishu (BL 20), and others were treated by puncture. The clinical therapeutic effect, and the changes of clinical score of constipation, quality of life and psychological symptoms score were observed before and after treatment. The total effective rate in acupuncture and moxibustion group was 74.0% (37/50), superior to that (52.0%, 26/50) in acupuncture group (P life and psychological symptoms score in both groups improved after treatment; in clinical score of constipation, the improvement of difficulty of defecation, defecation time, abdominal pain, exsufflation difficulty, endless sensation of defecation, obstruction sense of anus, purgative prescription dependence, quality of life score and psychological symptoms score in acupuncture and moxibustion group were superior to those in acupuncture group (P < 0.05, P < 0.01). For treating chronic functional constipation, the combined therapy of both grain-shaped moxibustion and acupuncture is safe and effective, superior to the simple acupuncture therapy.

  15. Whole-grain intake in middle school students achieves dietary guidelines for Americans and MyPlate recommendations when provided as commercially available foods: a randomized trial.

    Science.gov (United States)

    Radford, Allyson; Langkamp-Henken, Bobbi; Hughes, Christine; Christman, Mary C; Jonnalagadda, Satya; Boileau, Thomas W; Thielecke, Frank; Dahl, Wendy J

    2014-09-01

    In accordance with the 2010 Dietary Guidelines for Americans, at least half of total grain intake should be whole grains. Adolescents are currently not consuming the recommended daily intake of whole grains. Research is needed to determine whether whole grains are acceptable to adolescents and whether changing their food environment to include whole-grain foods will improve intake. The aim of this study was to determine the effect of providing refined-grain or whole-grain foods to adolescents, with encouragement to eat three different grain-based foods per day, on total grain and whole-grain intakes. Middle school students (n=83; aged 11 to 15 years) were randomly assigned to either refined-grain or whole-grain foods for 6 weeks. Participants and their families were provided with weekly grains (eg, bread, pasta, and cereals), and participants were provided grain snacks at school. Intake of grains in ounce equivalents (oz eq) was determined through eight baseline and intervention targeted 24-hour diet recalls. Participants consumed 1.1±1.3 oz eq (mean±standard deviation) of whole grains at baseline, out of 5.3±2.4 oz eq of total grains. During intervention, whole-grain intake increased in the whole-grain group (0.9±1.0 to 3.9±1.8 oz eq/day), whereas those in the refined-grain group reduced whole-grain intake (1.3±1.6 to 0.3±0.3 oz eq/day; Ptime period interaction). Total grain intake achieved was 6.4±2.1 oz eq/day and did not differ across intervention groups. Providing adolescents with whole-grain foods in their school and home environments was an effective means of achieving recommendations. Copyright © 2014 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

  16. On Techniques to Characterize and Correlate Grain Size, Grain Boundary Orientation and the Strength of the SiC Layer of TRISO Coated Particles: A Preliminary Study

    Energy Technology Data Exchange (ETDEWEB)

    I.J.van Rooyen; J.L. Dunzik Gougar; T. Trowbridge; Philip M van Rooyen

    2012-10-01

    The mechanical properties of the silicon carbide (SiC) layer of the TRi-ISOtropic (TRISO) coated particle (CP) for high temperature gas reactors (HTGR) are performance parameters that have not yet been standardized by the international HTR community. Presented in this paper are the results of characterizing coated particles to reveal the effect of annealing temperature (1000 to 2100°C) on the strength and grain size of unirradiated coated particles. This work was further expanded to include possible relationships between the grain size and strength values. The comparative results of two strength measurement techniques and grain size measured by the Lineal intercept method are included. Preliminary grain boundary characterization results determined by electron backscatter diffraction (EBSD) are included. These results are also important for future fission product transport studies, as grain boundary diffusion is identified as a possible mechanism by which 110mAg, one of the fission activation products, might be released through intact SiC layers. Temperature is a parameter known to influence the grain size of SiC and therefore it is important to investigate the effect of high temperature annealing on the SiC grain size. Recommendations and future work will also be briefly discussed.

  17. Fecal lactic acid bacteria increased in adolescents randomized to whole-grain but not refined-grain foods, whereas inflammatory cytokine production decreased equally with both interventions.

    Science.gov (United States)

    Langkamp-Henken, Bobbi; Nieves, Carmelo; Culpepper, Tyler; Radford, Allyson; Girard, Stephanie-Anne; Hughes, Christine; Christman, Mary C; Mai, Volker; Dahl, Wendy J; Boileau, Thomas; Jonnalagadda, Satya S; Thielecke, Frank

    2012-11-01

    The intake of whole-grain (WG) foods by adolescents is reported to be approximately one-third the recommended intake of 48 g/d. This 6-wk randomized interventional study determined the effect of replacing grains within the diet with refined-grain (RG; n = 42) or WG (n = 41) foods/d on gastrointestinal and immune health in adolescents (aged 12.7 ± 0.1 y). A variety of grain-based foods were delivered weekly to participants and their families. Participants were encouraged to eat 3 different kinds of study foods (e.g., bread, cereals, snacks)/d with goals of 0 g/d (RG) and 80 g/d (WG). Stool samples were obtained during the prebaseline and final weeks to measure bifidobacteria and lactic acid bacteria (LAB) using qPCR. Stool frequency was recorded daily. Blood was drawn at baseline and at final visits for immune markers. Across groups, total-grain intake increased by one serving. The intake of WG was similar at baseline (18 ± 3 g) between groups but increased to 60 ± 5 g in the WG group and decreased to 4 ± 1 g in the RG group. Fecal bifidobacteria increased from baseline with both interventions, but LAB increased (P antioxidant potential, or in vitro LPS-stimulated mononuclear cell production of inflammatory cytokines between groups. However, across both groups the number of daily stools tended to increase (P = 0.08) by 0.0034 stools/g WG or by 0.2 stools with 60 g WG, mean antioxidant potential increased by 58%, and mean production of TNF-α, IL-1β, and IL-6 decreased by 24, 22, and 42%, respectively, between baseline and wk 6. Overall, incorporating either WG or RG foods increased serum antioxidant concentrations and decreased inflammatory cytokine production; however, WG study foods had more of an effect on aspects of gastrointestinal health.

  18. Magnetic field alignment of randomly oriented, high aspect ratio silicon microwires into vertically oriented arrays.

    Science.gov (United States)

    Beardslee, Joseph A; Sadtler, Bryce; Lewis, Nathan S

    2012-11-27

    External magnetic fields have been used to vertically align ensembles of silicon microwires coated with ferromagnetic nickel films. X-ray diffraction and image analysis techniques were used to quantify the degree of vertical orientation of the microwires. The degree of vertical alignment and the minimum field strength required for alignment were evaluated as a function of the wire length, coating thickness, magnetic history, and substrate surface properties. Nearly 100% of 100 μm long, 2 μm diameter, Si microwires that had been coated with 300 nm of Ni could be vertically aligned by a 300 G magnetic field. For wires ranging from 40 to 60 μm in length, as the length of the wire increased, a higher degree of alignment was observed at lower field strengths, consistent with an increase in the available magnetic torque. Microwires that had been exposed to a magnetic sweep up to 300 G remained magnetized and, therefore, aligned more readily during subsequent magnetic field alignment sweeps. Alignment of the Ni-coated Si microwires occurred at lower field strengths on hydrophilic Si substrates than on hydrophobic Si substrates. The magnetic field alignment approach provides a pathway for the directed assembly of solution-grown semiconductor wires into vertical arrays, with potential applications in solar cells as well as in other electronic devices that utilize nano- and microscale components as active elements.

  19. Effect of Sn Grain Orientation on the Cu6Sn5 Formation in a Sn-Based Solder Under Current Stressing

    Science.gov (United States)

    Lin, Chih-Fan; Lee, Shang-Hua; Chen, Chih-Ming

    2012-08-01

    A SnAgCu-based solder stripe between two Cu electrodes is current stressed with a density of 5 × 104 A/cm2 at 393 K (120 °C). After current stressing for 24 hours, electromigration induces the Cu dissolution from the cathode-side Cu electrode, leading to the Cu6Sn5 formation in the solder stripe. Very interestingly, the Cu6Sn5 phase is selectively formed within a specific Sn grain. Electron backscattering diffraction analysis indicates the crystallographic orientations of Sn grains play an important role in the selective Cu6Sn5 formation.

  20. Electronic Properties of Grain Boundaries in GaAs: A Study of Oriented Bicrystals Prepared by Epitaxial Lateral Overgrowth.

    Science.gov (United States)

    1984-05-10

    adequately described by arrays of dislocations, termed grain boundary dislocations ( GBDs ), formed in the crystallographic lattice appropriate for the...In this limit the structure can no longer be assumed to be based on discrete GBDs and it becomes necessary to adopt other formalisms to describe the...unique "crystallography" associated with a grain boundary.(7 9) In contrast to the limited applicability of the GBD model, this grain boundary

  1. Multitrait, Random Regression, or Simple Repeatability Model in High-Throughput Phenotyping Data Improve Genomic Prediction for Wheat Grain Yield.

    Science.gov (United States)

    Sun, Jin; Rutkoski, Jessica E; Poland, Jesse A; Crossa, José; Jannink, Jean-Luc; Sorrells, Mark E

    2017-07-01

    High-throughput phenotyping (HTP) platforms can be used to measure traits that are genetically correlated with wheat ( L.) grain yield across time. Incorporating such secondary traits in the multivariate pedigree and genomic prediction models would be desirable to improve indirect selection for grain yield. In this study, we evaluated three statistical models, simple repeatability (SR), multitrait (MT), and random regression (RR), for the longitudinal data of secondary traits and compared the impact of the proposed models for secondary traits on their predictive abilities for grain yield. Grain yield and secondary traits, canopy temperature (CT) and normalized difference vegetation index (NDVI), were collected in five diverse environments for 557 wheat lines with available pedigree and genomic information. A two-stage analysis was applied for pedigree and genomic selection (GS). First, secondary traits were fitted by SR, MT, or RR models, separately, within each environment. Then, best linear unbiased predictions (BLUPs) of secondary traits from the above models were used in the multivariate prediction models to compare predictive abilities for grain yield. Predictive ability was substantially improved by 70%, on average, from multivariate pedigree and genomic models when including secondary traits in both training and test populations. Additionally, (i) predictive abilities slightly varied for MT, RR, or SR models in this data set, (ii) results indicated that including BLUPs of secondary traits from the MT model was the best in severe drought, and (iii) the RR model was slightly better than SR and MT models under drought environment. Copyright © 2017 Crop Science Society of America.

  2. Microwave single-scattering properties of randomly oriented soft-ice hydrometeors

    Directory of Open Access Journals (Sweden)

    D. Casella

    2008-11-01

    Full Text Available Large ice hydrometeors are usually present in intense convective clouds and may significantly affect the upwelling radiances that are measured by satellite-borne microwave radiometers – especially, at millimeter-wavelength frequencies. Thus, interpretation of these measurements (e.g., for precipitation retrieval requires knowledge of the single scattering properties of ice particles. On the other hand, shape and internal structure of these particles (especially, the larger ones is very complex and variable, and therefore it is necessary to resort to simplifying assumptions in order to compute their single-scattering parameters.

    In this study, we use the discrete dipole approximation (DDA to compute the absorption and scattering efficiencies and the asymmetry factor of two kinds of quasi-spherical and non-homogeneous soft-ice particles in the frequency range 50–183 GHz. Particles of the first kind are modeled as quasi-spherical ice particles having randomly distributed spherical air inclusions. Particles of the second kind are modeled as random aggregates of ice spheres having random radii. In both cases, particle densities and dimensions are coherent with the snow hydrometeor category that is utilized by the University of Wisconsin – Non-hydrostatic Modeling System (UW-NMS cloud-mesoscale model. Then, we compare our single-scattering results for randomly-oriented soft-ice hydrometeors with corresponding ones that make use of: a effective-medium equivalent spheres, b solid-ice equivalent spheres, and c randomly-oriented aggregates of ice cylinders. Finally, we extend to our particles the scattering formulas that have been developed by other authors for randomly-oriented aggregates of ice cylinders.

  3. Graded index and randomly oriented core-shell silicon nanowires for broadband and wide angle antireflection

    Directory of Open Access Journals (Sweden)

    P. Pignalosa

    2011-09-01

    Full Text Available Antireflection with broadband and wide angle properties is important for a wide range of applications on photovoltaic cells and display. The SiOx shell layer provides a natural antireflection from air to the Si core absorption layer. In this work, we have demonstrated the random core-shell silicon nanowires with both broadband (from 400nm to 900nm and wide angle (from normal incidence to 60º antireflection characteristics within AM1.5 solar spectrum. The graded index structure from the randomly oriented core-shell (Air/SiOx/Si nanowires may provide a potential avenue to realize a broadband and wide angle antireflection layer.

  4. Effect of slab reheating temperature on recrystallization microstructure, texture and magnetic properties of Nb-containing grain-oriented silicon steel

    Science.gov (United States)

    Feng, Yunli; Li, Yang; Guo, Jing; Li, Jie; Du, Tiantian

    2017-10-01

    In this study, a Nb-containing grain-oriented silicon steel was chosen to investigate the effect of different slab reheating temperatures on the microstructure and texture of primary recrystallization and secondary recrystallization by optical microscope (OM), field emission scanning electron microscope (FE-SEM) equipped with electron backscatter diffraction (EBSD) system and transmission electron microscope (TEM). The magnetic properties of finished product were also measured. The results show that Nb(C,N) can be formed and worked as the main inhibitor after adding Nb into the traditional grain-oriented silicon steel to lower the reheating temperature of the slab. At different low slab reheating temperatures, primary recrystallization takes place in all decarburized specimens, and at 1220 °C, the microstructure is the most fine and uniform. The types of primary recrystallization texture are consistent composed of strong {4 1 1} texture, dominated γ-fiber texture {1 1 1} and {1 1 1}, weak α-fiber texture and some Goss components. The proportions of HEGB and Σ9 boundary are the highest at 1220 °C after decarburization annealing, which is beneficial to the grain growth of primary recrystallization. After high temperature annealing, the specimen of 1220 °C slab reheating temperature can be fully recrystallized to obtain secondary recrystallization grains on the centimeter scale, and the texture component is characterized by a single Goss texture. The magnetic properties of finished product are the best, and B800 = 1.88 T, P1.7/50 = 1.31 W/kg.

  5. Effect of Grain Orientation and Boundary Distributions on Hydrogen-Induced Cracking in Low-Carbon-Content Steels

    Science.gov (United States)

    Masoumi, Mohammad; Coelho, Hana Livia Frota; Tavares, Sérgio Souto Maior; Silva, Cleiton Carvalho; de Abreu, Hamilton Ferreira Gomes

    2017-08-01

    Hydrogen-induced cracking (HIC) causes considerable economic losses in a wide range of steels exposed to corrosive environments. The effect of crystallographic texture and grain boundary distributions tailored by rolling at 850 °C in three different steels with a body-centered cube structure was investigated on HIC resistance. The x-ray and electron backscattered diffraction techniques were used to characterize texture evolutions during the rolling process. The findings revealed a significant improvement against HIC based on texture engineering. In addition, increasing the number of {111} and {110} grains, associated with minimizing the number of {001} grains in warm-rolled samples, reduced HIC susceptibility. Moreover, the results showed that boundaries associated with low {hkl} indexing and denser packing planes had more resistance against crack propagation.

  6. Microstructure analysis and comparison of tungsten alloy rod and [001] oriented columnar-grained tungsten rod ballistic penetrators

    Energy Technology Data Exchange (ETDEWEB)

    Pappu, S.; Kennedy, C.; Murr, L.E. [Texas Univ., El Paso, TX (United States). Dept. of Metallurgical and Materials Engineering; Magness, L.S. [US Army Research Lab., Aberdeen Proving Ground, MD (United States); Kapoor, D. [US Army Armament, Research, Development, and Engineering Center (ARDEC), Picatinny Arsenal, NJ (United States)

    1999-04-01

    Tungsten heavy alloy (WHA) penetrator rods (93% W particles in a matrix of 4.9% Ni and 2.1% Fe) were compared with [001] columnar-grained W penetrator rods in the as-fabricated condition, and after penetration into thick targets at impact velocities of 1 and 1.5 km s{sup -1}, respectively. Light metallography and transmission electron microscopy revealed the initial W microstructures to be similar arrangements of predominantly a left angle 111 right angle /2 screw dislocations. The in-target (deformed) microstructures were characterized by recovered and elongated sub-grains having misorientations ranging from 1 to 5 . (orig.) 22 refs.

  7. Cellular compatibility of RGD-modified chitosan nanofibers with aligned or random orientation

    Energy Technology Data Exchange (ETDEWEB)

    Wang Yanyan; Lue Lanxin; Feng Zhangqi; Xiao Zhongdang; Huang Ningping, E-mail: nphuang@seu.edu.c, E-mail: zdxiao@seu.edu.c [State Key Laboratory of Bioelectronics, School of Biological Science and Medical Engineering, Southeast University, Nanjing 210096 (China)

    2010-10-01

    Aligned and randomly oriented chitosan nanofibers were prepared by electrospinning. The fibers were modified with the RGD cell-adhesive peptide through a heterobifunctional crosslinker containing a segment of poly(ethylene glycol) (PEG). PEG rendered the surface hydrophilic and provided flexible spacers, allowing the preservation of the bioactivity of further captured RGD peptides. NIH 3T3 cells were used to test the cellular compatibility of these chitosan nanofibrous scaffolds. Cell morphology and viability were investigated by SEM, fluorescent staining and cell counting. The results indicate that RGD-modified surfaces significantly improve the cellular compatibility of chitosan nanofibers and suggest a good candidate as a scaffold employed in tissue engineering.

  8. Public attitudes toward child undervaccination: A randomized experiment on evaluations, stigmatizing orientations, and support for policies.

    Science.gov (United States)

    Carpiano, Richard M; Fitz, Nicholas S

    2017-07-01

    Child undervaccination is a complex public health problem and a contentious social and political issue. Efforts to increase vaccination coverage require understanding how the public evaluates different reasons for child undervaccination, which may influence attitudes, stigmatizing behaviors, and support for vaccination policies. We conducted a vignette experiment with a United States national online sample (n = 1469) to investigate how and why different undervaccination actions shape evaluations (blame, anger, sympathy, differentness, credibility, dangerousness), stigmatizing orientations (social distance, discrimination), and support for particular policies (e.g., research funding, belief exemptions, fines). Each participant was randomly assigned to read one of four vignettes that described a mother who either refused vaccines, delayed vaccines, encountered social barriers to obtaining vaccines, or was up-to-date on vaccines for her child. Compared to the up-to-date condition, each undervaccination action predicted significantly more negative evaluations and stigmatizing orientations. Vaccine refusal was the most negatively appraised. Differences in social distance and discrimination were explained by negative evaluations about the parent. These evaluations and orientations predicted support for a range of policies. Negative parental evaluations were associated with increased support for more severe policies. We discuss the implications of these findings for addressing undervaccination and informing health scholarship on stigma. Copyright © 2017 Elsevier Ltd. All rights reserved.

  9. Vibration Analysis of Randomly Oriented Carbon Nanotube Based on FGM Beam Using Timoshenko Theory

    Directory of Open Access Journals (Sweden)

    Mohammad Amin Rashidifar

    2015-02-01

    Full Text Available The carbon nanotube (CNT reinforced functionally graded materials (FGM are expected to be the new generation materials having wide range of unexplored potential applications in various technological areas such as aerospace and structural and chemical industry. The present work deals with the finite element modeling and free vibration analysis of CNT based functionally graded beam using three-dimensional Timoshenko beam theory. It has been assumed that the material properties of CNT based FG beam vary only along the thickness and these properties are evaluated by rule of mixture. The extended Hamilton principle has been applied to find out the governing equations of CNT based FG beam. Finite element method is used to solve governing equation with the exact shape functions. Initial analysis deals with CNTs assumed to be oriented along the length direction only. But practically it is not possible. So, further work deals with the free vibration analysis of functionally graded nanocomposite beams reinforced by randomly oriented straight single walled carbon nanotubes (SWCNTs. The Eshelby-Mori-Tanaka approach based on an equivalent fiber is used to investigate the material properties of the beam. Results are presented in tabular and graphical forms to show the effects of carbon nanotube orientations, slenderness ratios, and boundary conditions on the dynamic behavior of the beam.

  10. Real-Space x-ray tomographic reconstruction of randomly oriented objects with sparse data frames.

    Science.gov (United States)

    Ayyer, Kartik; Philipp, Hugh T; Tate, Mark W; Elser, Veit; Gruner, Sol M

    2014-02-10

    Schemes for X-ray imaging single protein molecules using new x-ray sources, like x-ray free electron lasers (XFELs), require processing many frames of data that are obtained by taking temporally short snapshots of identical molecules, each with a random and unknown orientation. Due to the small size of the molecules and short exposure times, average signal levels of much less than 1 photon/pixel/frame are expected, much too low to be processed using standard methods. One approach to process the data is to use statistical methods developed in the EMC algorithm (Loh & Elser, Phys. Rev. E, 2009) which processes the data set as a whole. In this paper we apply this method to a real-space tomographic reconstruction using sparse frames of data (below 10(-2) photons/pixel/frame) obtained by performing x-ray transmission measurements of a low-contrast, randomly-oriented object. This extends the work by Philipp et al. (Optics Express, 2012) to three dimensions and is one step closer to the single molecule reconstruction problem.

  11. Effect of NICU Department Orientation Program on Mother’s Anxiety: a Randomized Clinical Trial

    Directory of Open Access Journals (Sweden)

    Leila Valizadeh

    2016-09-01

    Full Text Available Introduction: Neonatal intensive care unit induces the high level of anxiety for mothers. The aim of this study was to evaluate the effectiveness of NICU orientation program on the anxiety of mothers who had preterm newborns hospitalized in NICU. Methods: This study was a randomized clinical trial (three parallel groups. Participants included 99 mothers with preterm newborns hospitalized in NICU of Al- Zahra hospital, affiliated to Tabriz University of Medical Sciences in 2015. Mothers were randomly assigned to one of three groups (film, booklet, and control. Mothers completed the State- Trait Anxiety Inventory before entering to the NICU, and then mothers in the experiment groups became familiar with the NICU environment through watching a film or reading booklet. After the first NICU visit, all mothers completed the STAI and Cattell's Anxiety Questionnaires. Data were analyzed using SPSS ver. 13 software. Results: There was no significant difference between three groups regarding state- trait anxiety before the intervention. After the first NICU visit, a significant reduction in maternal state anxiety was seen in the both experiment groups. There was no statistical significant difference regarding trait anxiety. Data obtained from Cattell's anxiety questionnaire after intervention, showed significant difference in state anxiety between groups. Conclusion: Employing film and booklet orientation strategy after preterm delivery can reduce the mother’s anxiety and beneficent for the mother, baby, family and health care system.

  12. Empirical forward scattering phase functions from 0.08 to 16 deg. for randomly shaped terrigenous 1-21 microm sediment grains.

    Science.gov (United States)

    Agrawal, Y C; Mikkelsen, Ole A

    2009-05-25

    We present in-water forward scattering phase functions covering the angle range 0.08 to 16 degrees for 19 narrow-sized dispersions of randomly shaped sediment grains. These dispersions cover particle size range from 1 to 20 microns. These phase functions offer a realistic alternative to Mie theory. Qualitatively, (i) the magnitude of phase functions at the smallest angles for equal size spheres and randomly shaped particles are nearly equal; (ii) the oscillations predicted by Mie theory for spheres disappear for random shaped grains, and (iii) the tendency of phase functions of large spheres to merge at large angles is also seen with randomly shaped grains. The data are also provided in tabulated form.

  13. Guiding the orientation of smooth muscle cells on random and aligned polyurethane/collagen nanofibers.

    Science.gov (United States)

    Jia, Lin; Prabhakaran, Molamma P; Qin, Xiaohong; Ramakrishna, Seeram

    2014-09-01

    Fabricating scaffolds that can simulate the architecture and functionality of native extracellular matrix is a huge challenge in vascular tissue engineering. Various kinds of materials are engineered via nano-technological approaches to meet the current challenges in vascular tissue regeneration. During this study, nanofibers from pure polyurethane and hybrid polyurethane/collagen in two different morphologies (random and aligned) and in three different ratios of polyurethane:collagen (75:25; 50:50; 25:75) are fabricated by electrospinning. The fiber diameters of the nanofibrous scaffolds are in the range of 174-453 nm and 145-419 for random and aligned fibers, respectively, where they closely mimic the nanoscale dimensions of native extracellular matrix. The aligned polyurethane/collagen nanofibers expressed anisotropic wettability with mechanical properties which is suitable for regeneration of the artery. After 12 days of human aortic smooth muscle cells culture on different scaffolds, the proliferation of smooth muscle cells on hybrid polyurethane/collagen (3:1) nanofibers was 173% and 212% higher than on pure polyurethane scaffolds for random and aligned scaffolds, respectively. The results of cell morphology and protein staining showed that the aligned polyurethane/collagen (3:1) scaffold promote smooth muscle cells alignment through contact guidance, while the random polyurethane/collagen (3:1) also guided cell orientation most probably due to the inherent biochemical composition. Our studies demonstrate the potential of aligned and random polyurethane/collagen (3:1) as promising substrates for vascular tissue regeneration. © The Author(s) 2014 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

  14. Deducing fast electron density changes in randomly orientated uncrystallized biomolecules in a pump-probe experiment.

    Science.gov (United States)

    Pande, K; Schwander, P; Schmidt, M; Saldin, D K

    2014-07-17

    We propose a method for deducing time-resolved structural changes in uncrystallized biomolecules in solution. The method relies on measuring the angular correlations of the intensities, when averaged over a large number of diffraction patterns from randomly oriented biomolecules in solution in a liquid solvent. The experiment is somewhat like a pump-probe version of an experiment on small angle X-ray scattering, except that the data expected by the algorithm are not just the radial variation of the averaged intensities. The differences of these correlation functions as measured from a photoexcited and dark structure enable the direct calculation of the difference electron density with a knowledge of only the dark structure. We exploit a linear relation we derive between the difference in these correlation functions and the difference electron density, applicable for small structural changes.

  15. Patient-oriented rehabilitation in the management of chronic mechanical neck pain: a randomized controlled trial.

    Science.gov (United States)

    Paoloni, M; Tavernese, E; Cacchio, A; Tattoli, M; Melis, L; Ronconi, R; Santilli, V

    2013-06-01

    Management of chronic mechanical neck pain (CMNP) still represents a challenge. A patient-oriented (Pa-O) therapeutic approach could be considered as the one in which therapies are scheduled at the start of each therapeutic session according to the patient's current physical status, and differs from a prescription-oriented (Pr-O) therapeutic approach, in which therapies are prescribed at the first medical referral and are not adjusted at any time during the treatment period. To determine if a Pa-O approach may be more beneficial for CMNP patients when compared to a Pr-O one. Randomized controlled trial. 220 CMNP outpatients randomized to either Pa-O group (N.=114) or Pr-O group (N.=106). Each group received 10 therapeutic sessions over 3 weeks. Primary outcome measures were pain assessment, evaluated by Visual-Analog-Scale (VAS), and disability level, evaluated by the Neck Pain and Disability Scale (NPDS-I). Secondary outcome measures included patients' response to treatment and treatment failures. Measurements were carried out at baseline (T0) and 1 month after treatment ended (T1). Data were analysed according to the intention-to-treat principle. Patients in both groups displayed at T1 a significant reduction in VAS and NPDS-I scores. The relative changes at T1 were greater in Pa-O group when compared with Pr-O group both for VAS (61.5% versus 48.8%; Pup in suffers from CMNP. However, the occurrence of a performance-bias due to the increased level of attention from physicians to patients in Pa-O group, cannot be ruled-out. A Pa-O approach should be considered for CMNP also in an outpatient facility.

  16. Effect of SiC Nano powder on Multiaxial Woven and Chopped Randomly Oriented Flax/Sisal Fiber Reinforced composites

    Directory of Open Access Journals (Sweden)

    Kalagi Ganesh R.

    2018-01-01

    Full Text Available A study has been carried out to investigate effect of SiC Nano powder on tensile and impact properties of Multiaxial layers of Flax and Sisal fiber reinforced composites and randomly oriented chopped Flax and Sisal fiber reinforced composites. It has been observed that tensile strength and impact strength were improved using 6% of SiC Nanopowder into Multiaxial layer (+45º/-45º, 0º/90º of Flax and Sisal where as randomly oriented chopped Flax and Sisal fiber reinforced composites are improved in its stiffnes for the same composition of fiber, epoxy and SiC Nano powder. SEM Analysis are done to analyse the distribution of SiC in both Multiaxial layers of Flax and Sisal fiber reinforced composites and randomly oriented chopped Flax and Sisal fiber reinforced composites.

  17. Effects of whole grain, fish and bilberries on serum metabolic profile and lipid transfer protein activities: a randomized trial (Sysdimet).

    Science.gov (United States)

    Lankinen, Maria; Kolehmainen, Marjukka; Jääskeläinen, Tiina; Paananen, Jussi; Joukamo, Laura; Kangas, Antti J; Soininen, Pasi; Poutanen, Kaisa; Mykkänen, Hannu; Gylling, Helena; Orešič, Matej; Jauhiainen, Matti; Ala-Korpela, Mika; Uusitupa, Matti; Schwab, Ursula

    2014-01-01

    We studied the combined effects of wholegrain, fish and bilberries on serum metabolic profile and lipid transfer protein activities in subjects with the metabolic syndrome. Altogether 131 subjects (40-70 y, BMI 26-39 kg/m(2)) with impaired glucose metabolism and features of the metabolic syndrome were randomized into three groups with 12-week periods according to a parallel study design. They consumed either: a) wholegrain and low postprandial insulin response grain products, fatty fish 3 times a week, and bilberries 3 portions per day (HealthyDiet), b) wholegrain and low postprandial insulin response grain products (WGED), or c) refined wheat breads as cereal products (Control). Altogether 106 subjects completed the study. Serum metabolic profile was studied using an NMR-based platform providing information on lipoprotein subclasses and lipids as well as low-molecular-weight metabolites. There were no significant differences in clinical characteristics between the groups at baseline or at the end of the intervention. Mixed model analyses revealed significant changes in lipid metabolites in the HealthyDiet group during the intervention compared to the Control group. All changes reflected increased polyunsaturation in plasma fatty acids, especially in n-3 PUFAs, while n-6 and n-7 fatty acids decreased. According to tertiles of changes in fish intake, a greater increase of fish intake was associated with increased concentration of large HDL particles, larger average diameter of HDL particles, and increased concentrations of large HDL lipid components, even though total levels of HDL cholesterol remained stable. The results suggest that consumption of diet rich in whole grain, bilberries and especially fatty fish causes changes in HDL particles shifting their subclass distribution toward larger particles. These changes may be related to known protective functions of HDL such as reverse cholesterol transport and could partly explain the known protective effects of fish

  18. Exceptionally High Piezoelectric Coefficient and Low Strain Hysteresis in Grain-Oriented (Ba, Ca)(Ti, Zr)O3through Integrating Crystallographic Texture and Domain Engineering.

    Science.gov (United States)

    Liu, Yingchun; Chang, Yunfei; Li, Fei; Yang, Bin; Sun, Yuan; Wu, Jie; Zhang, Shantao; Wang, Ruixue; Cao, Wenwu

    2017-09-06

    Both low strain hysteresis and high piezoelectric performance are required for practical applications in precisely controlled piezoelectric devices and systems. Unfortunately, enhanced piezoelectric properties were usually obtained with the presence of a large strain hysteresis in BaTiO 3 (BT)-based piezoceramics. In this work, we propose to integrate crystallographic texturing and domain engineering strategies into BT-based ceramics to resolve this challenge. [001] c grain-oriented (Ba 0.94 Ca 0.06 )(Ti 0.95 Zr 0.05 )O 3 (BCTZ) ceramics with a texture degree as high as 98.6% were synthesized by templated grain growth. A very high piezoelectric coefficient (d 33 ) of 755 pC/N, and an extremely large piezoelectric strain coefficient (d 33 * = 2027 pm/V) along with an ultralow strain hysteresis (H s ) of 4.1% were simultaneously achieved in BT-based systems for the first time, which are among the best values ever reported on both lead-free and lead-based piezoceramics. The exceptionally high piezoelectric response is mainly from the reversible contribution, and can be ascribed to the piezoelectric anisotropy, the favorable domain configuration, and the formation of smaller sized domains in the BCTZ textured ceramics. This study paves a new pathway to develop lead-free piezoelectrics with both low strain hysteresis and high piezoelectric coefficient. More importantly, it represents a very exciting discovery with potential application of BT-based ceramics in high-precision piezoelectric actuators.

  19. Raman Imaging Spectroscopy of a Putative Microfossil from the ∼3.46 Ga Apex Chert: Insights from Quartz Grain Orientation.

    Science.gov (United States)

    Bower, D M; Steele, A; Fries, M D; Green, O R; Lindsay, J F

    2016-02-01

    The utility of nondestructive laser Raman for testing the biogenicity of microfossil-like structures in ancient rocks is promising, yet results from deposits like the ∼3.46 Ga Apex chert remain contentious. The essence of the debate is that associated microstructures, which are not purported to be microfossils, also contain reduced carbon that displays Raman D- and G-band peaks similar to those seen in the purported microfossils. This has led to the hypothesis that all features including reported microfossils are due to compression of nonfossil carbon during crystal growth around quartz spherulites or more angular crystals. In this scenario, the precursor to this macromolecular carbon may or may not have been of biogenic origin, while the arcuate and linear features described would be pseudofossils. To test this hypothesis, we have undertaken 2-D micro-Raman imaging of the Eoleptonema apex holotype and associated features using instrumentation with a high spatial and spectral resolution. In addition to this, we utilized the ratio of two Raman active quartz mode intensities (I129/I461) to assess quartz grain orientation and grain-splitting artifacts. These data lead us to conclude that the holotype of Eoleptonema apex is a sheet-shaped pseudofossil that appears to be a carbon infilled intragranular crack; therefore other holotypes should be carefully reexamined for syngenicity.

  20. The influence of laser scribing on magnetic domain formation in grain oriented electrical steel visualized by directional neutron dark-field imaging

    Science.gov (United States)

    Rauscher, P.; Betz, B.; Hauptmann, J.; Wetzig, A.; Beyer, E.; Grünzweig, C.

    2016-12-01

    The performance and degree of efficiency of transformers are directly determined by the bulk magnetic properties of grain oriented electrical steel laminations. The core losses can be improved by post manufacturing methods, so-called domain refinement techniques. All these methods induce mechanical or thermal stress that refines the domain structure. The most commonly used technique is laser scribing due to the no-contact nature and the ease of integration in existing production systems. Here we show how directional neutron dark-field imaging allows visualizing the impact of laser scribing on the bulk and supplementary domain structure. In particular, we investigate the domain formation during magnetization of samples depending on laser treatment parameters such as laser energy and line distances. The directional dark-field imaging findings were quantitatively interpreted in the context with global magnetic hysteresis measurements. Especially we exploit the orientation sensitivity in the dark-field images to distinguish between different domain structures alignment and their relation to the laser scribing process.

  1. High spatial resolution grain orientation and strain mapping in thin films using polychromatic submicron X-ray diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Tamura, N.; MacDowell, A.A.; Celestre, R.S.; Padmore, H.A.; Valek, B.C.; Bravman, J.C.; Spolenak, R.; Brown, W.L.; Marieb, T.; Fujimoto, H.; Batterman, B.W.; Patel, J.R.

    2002-03-26

    The availability of high brilliance synchrotron sources, coupled with recent progress in achromatic focusing optics and large area 2D detector technology, have allowed us to develop an X-ray synchrotron technique capable of mapping orientation and strain/stress in polycrystalline thin films with submicron spatial resolution. To demonstrate the capabilities of this instrument, we have employed it to study the microstructure of aluminum thin film structures at the granular and subgranular level. Owing to the relatively low absorption of X-rays in materials, this technique can be used to study passivated samples, an important advantage over most electron probes given the very different mechanical behavior of buried and unpassivated materials.

  2. High Spatial Resolution Grain Orientation and Strain Mapping in Thin Films using Polychromatic Submicron X-ray Diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Patel, Jamshed R.

    2002-06-14

    The availability of high brilliance synchrotron sources, coupled with recent progress in achromatic focusing optics and large area 2D detector technology, have allowed us to develop a X-ray synchrotron technique capable of mapping orientation and strain/stress in polycrystalline thin films with submicron spatial resolution. To demonstrate the capabilities of this instrument, we have employed it to study the microstructure of aluminum thin film structures at the granular and subgranular level. Owing to the relatively low absorption of X-rays in materials, this technique can be used to study passivated samples, an important advantage over most electron probes given the very different mechanical behavior of buried and unpassivated materials.

  3. Substituting whole grains for refined grains in a 6-wk randomized trial has a modest effect on gut microbiota and immune and inflammatory markers of healthy adults

    Science.gov (United States)

    Background: Observational studies suggest an inverse association between whole-grain (WG) consumption and inflammation. However, evidence from interventional studies is limited, and few studies have included measurements of cell-mediated immunity. Objective: We assessed the effects of diets rich in ...

  4. Generalized Pareto for Pattern-Oriented Random Walk Modelling of Organisms' Movements.

    Science.gov (United States)

    Bertrand, Sophie; Joo, Rocío; Fablet, Ronan

    2015-01-01

    How organisms move and disperse is crucial to understand how population dynamics relates to the spatial heterogeneity of the environment. Random walk (RW) models are typical tools to describe movement patterns. Whether Lévy or alternative RW better describes forager movements is keenly debated. We get around this issue using the Generalized Pareto Distribution (GPD). GPD includes as specific cases Normal, exponential and power law distributions, which underlie Brownian, Poisson-like and Lévy walks respectively. Whereas previous studies typically confronted a limited set of candidate models, GPD lets the most likely RW model emerge from the data. We illustrate the wide applicability of the method using GPS-tracked seabird foraging movements and fishing vessel movements tracked by Vessel Monitoring System (VMS), both collected in the Peruvian pelagic ecosystem. The two parameters from the fitted GPD, a scale and a shape parameter, provide a synoptic characterization of the observed movement in terms of characteristic scale and diffusive property. They reveal and quantify the variability, among species and individuals, of the spatial strategies selected by predators foraging on a common prey field. The GPD parameters constitute relevant metrics for (1) providing a synthetic and pattern-oriented description of movement, (2) using top predators as ecosystem indicators and (3) studying the variability of spatial behaviour among species or among individuals with different personalities.

  5. Generalized Pareto for Pattern-Oriented Random Walk Modelling of Organisms’ Movements

    Science.gov (United States)

    Bertrand, Sophie; Joo, Rocío; Fablet, Ronan

    2015-01-01

    How organisms move and disperse is crucial to understand how population dynamics relates to the spatial heterogeneity of the environment. Random walk (RW) models are typical tools to describe movement patterns. Whether Lévy or alternative RW better describes forager movements is keenly debated. We get around this issue using the Generalized Pareto Distribution (GPD). GPD includes as specific cases Normal, exponential and power law distributions, which underlie Brownian, Poisson-like and Lévy walks respectively. Whereas previous studies typically confronted a limited set of candidate models, GPD lets the most likely RW model emerge from the data. We illustrate the wide applicability of the method using GPS-tracked seabird foraging movements and fishing vessel movements tracked by Vessel Monitoring System (VMS), both collected in the Peruvian pelagic ecosystem. The two parameters from the fitted GPD, a scale and a shape parameter, provide a synoptic characterization of the observed movement in terms of characteristic scale and diffusive property. They reveal and quantify the variability, among species and individuals, of the spatial strategies selected by predators foraging on a common prey field. The GPD parameters constitute relevant metrics for (1) providing a synthetic and pattern–oriented description of movement, (2) using top predators as ecosystem indicators and (3) studying the variability of spatial behaviour among species or among individuals with different personalities. PMID:26172045

  6. Generalized Pareto for Pattern-Oriented Random Walk Modelling of Organisms' Movements.

    Directory of Open Access Journals (Sweden)

    Sophie Bertrand

    Full Text Available How organisms move and disperse is crucial to understand how population dynamics relates to the spatial heterogeneity of the environment. Random walk (RW models are typical tools to describe movement patterns. Whether Lévy or alternative RW better describes forager movements is keenly debated. We get around this issue using the Generalized Pareto Distribution (GPD. GPD includes as specific cases Normal, exponential and power law distributions, which underlie Brownian, Poisson-like and Lévy walks respectively. Whereas previous studies typically confronted a limited set of candidate models, GPD lets the most likely RW model emerge from the data. We illustrate the wide applicability of the method using GPS-tracked seabird foraging movements and fishing vessel movements tracked by Vessel Monitoring System (VMS, both collected in the Peruvian pelagic ecosystem. The two parameters from the fitted GPD, a scale and a shape parameter, provide a synoptic characterization of the observed movement in terms of characteristic scale and diffusive property. They reveal and quantify the variability, among species and individuals, of the spatial strategies selected by predators foraging on a common prey field. The GPD parameters constitute relevant metrics for (1 providing a synthetic and pattern-oriented description of movement, (2 using top predators as ecosystem indicators and (3 studying the variability of spatial behaviour among species or among individuals with different personalities.

  7. Promoting physical activity with goal-oriented mental imagery: a randomized controlled trial.

    Science.gov (United States)

    Chan, Carina K Y; Cameron, Linda D

    2012-06-01

    Self-regulation theory and research suggests that different types of mental imagery can promote goal-directed behaviors. The present study was designed to compare the efficacy of approach imagery (attainment of desired goal states) and process imagery (steps for enacting behavior) in promoting physical activity among inactive individuals. A randomized controlled trial was conducted with 182 inactive adults who received one of four interventions for generating mental images related to physical activity over a 4-week period, with Approach Imagery (approach versus neutral) and Process Imagery (process versus no process) as the intervention strategies. Participants received imagery training and practiced daily. Repeated measures ANOVAs revealed that Approach Imagery: (1) increased approach motivations for physical activity at Week 4; (2) induced greater intentions post-session, which subsequently induced more action planning at Week 4; (3) enhanced action planning when combined with process images at post-session and Week 1; and (4) facilitated more physical activity at Week 4 via action planning. These findings suggest that inducing approach orientation via mental imagery may be a convenient and low-cost technique to promote physical activity among inactive individuals.

  8. Influence of crystal shapes on radiative fluxes in visible wavelength: ice crystals randomly oriented in space

    Directory of Open Access Journals (Sweden)

    P. Chervet

    1996-08-01

    Full Text Available Radiative properties of cirrus clouds are one of the major unsolved problems in climate studies and global radiation budget. These clouds are generally composed of various ice-crystal shapes, so we tried to evaluate effects of the ice-crystal shape on radiative fluxes. We calculated radiative fluxes of cirrus clouds with a constant geometrical depth, composed of ice crystals with different shapes (hexagonal columns, bullets, bullet-rosettes, sizes and various concentrations. We considered ice particles randomly oriented in space (3D case and their scattering phase functions were calculated by a ray-tracing method. We calculated radiative fluxes for cirrus layers for different microphysical characteristics by using a discrete-ordinate radiative code. Results showed that the foremost effect of the ice-crystal shape on radiative properties of cirrus clouds was that on the optical thickness, while the variation of the scattering phase function with the ice shape remained less than 3% for our computations. The ice-water content may be a better choice to parameterize the optical properties of cirrus, but the shape effect must be included.

  9. Processing of X-ray snapshots from crystals in random orientations.

    Science.gov (United States)

    Kabsch, Wolfgang

    2014-08-01

    A functional expression is introduced that relates scattered X-ray intensities from a still or a rotation snapshot to the corresponding structure-factor amplitudes. The new approach was implemented in the program nXDS for processing monochromatic diffraction images recorded by a multi-segment detector where each exposure could come from a different crystal. For images containing indexable spots, the intensities of the expected reflections and their variances are obtained by profile fitting after mapping the contributing pixel contents to the Ewald sphere. The varying intensity decline owing to the angular distance of the reflection from the surface of the Ewald sphere is estimated using a Gaussian rocking curve. This decline is dubbed `Ewald offset correction', which is well defined even for still images. Together with an image-scaling factor and other corrections, an explicit expression is defined that predicts each recorded intensity from its corresponding structure-factor amplitude. All diffraction parameters, scaling and correction factors are improved by post-refinement. The ambiguous case of a lower point group than the lattice symmetry is resolved by a method reminiscent of the technique of `selective breeding'. It selects the indexing alternative for each image that yields, on average, the highest correlation with intensities from all other images. Processing a test set of rotation images by XDS and treating the same images by nXDS as snapshots of crystals in random orientations yields data of comparable quality, clearly indicating an anomalous signal from Se atoms.

  10. Bilateral robotic priming before task-oriented approach in subacute stroke rehabilitation: a pilot randomized controlled trial.

    Science.gov (United States)

    Hsieh, Yu-Wei; Wu, Ching-Yi; Wang, Wei-En; Lin, Keh-Chung; Chang, Ku-Chou; Chen, Chih-Chi; Liu, Chien-Ting

    2017-02-01

    To investigate the treatment effects of bilateral robotic priming combined with the task-oriented approach on motor impairment, disability, daily function, and quality of life in patients with subacute stroke. A randomized controlled trial. Occupational therapy clinics in medical centers. Thirty-one subacute stroke patients were recruited. Participants were randomly assigned to receive bilateral priming combined with the task-oriented approach (i.e., primed group) or to the task-oriented approach alone (i.e., unprimed group) for 90 minutes/day, 5 days/week for 4 weeks. The primed group began with the bilateral priming technique by using a bimanual robot-aided device. Motor impairments were assessed by the Fugal-Meyer Assessment, grip strength, and the Box and Block Test. Disability and daily function were measured by the modified Rankin Scale, the Functional Independence Measure, and actigraphy. Quality of life was examined by the Stroke Impact Scale. The primed and unprimed groups improved significantly on most outcomes over time. The primed group demonstrated significantly better improvement on the Stroke Impact Scale strength subscale ( p = 0.012) and a trend for greater improvement on the modified Rankin Scale ( p = 0.065) than the unprimed group. Bilateral priming combined with the task-oriented approach elicited more improvements in self-reported strength and disability degrees than the task-oriented approach by itself. Further large-scale research with at least 31 participants in each intervention group is suggested to confirm the study findings.

  11. Substituting whole grains for refined grains in a 6-wk randomized trial has a modest effect on gut microbiota and immune and inflammatory markers of healthy adults.

    Science.gov (United States)

    Vanegas, Sally M; Meydani, Mohsen; Barnett, Junaidah B; Goldin, Barry; Kane, Anne; Rasmussen, Helen; Brown, Carrie; Vangay, Pajau; Knights, Dan; Jonnalagadda, Satya; Koecher, Katie; Karl, J Philip; Thomas, Michael; Dolnikowski, Gregory; Li, Lijun; Saltzman, Edward; Wu, Dayong; Meydani, Simin Nikbin

    2017-03-01

    Background: Observational studies suggest an inverse association between whole-grain (WG) consumption and inflammation. However, evidence from interventional studies is limited, and few studies have included measurements of cell-mediated immunity. Objective: We assessed the effects of diets rich in WGs compared with refined grains (RGs) on immune and inflammatory responses, gut microbiota, and microbial products in healthy adults while maintaining subject body weights. Design: After a 2-wk provided-food run-in period of consuming a Western-style diet, 49 men and 32 postmenopausal women [age range: 40-65 y, body mass index (in kg/m 2 ) microbiota, SCFAs, effector memory T cells, and the acute innate immune response and no effect on other markers of cell-mediated immunity or systemic and gut inflammation. This trial was registered at clinicaltrials.gov as NCT01902394. © 2017 American Society for Nutrition.

  12. Influence of grain orientation on evolution of surface features in fatigued polycrystalline copper: a comparison of thermal and uniaxial mechanical fatigue results

    CERN Document Server

    Aicheler, M

    2010-01-01

    Surface state plays a major role in the crack nucleation process of pure metals in the High-Cycle-Fatigue (HCF) as well as in the Ultra-High-Cycle-Fatigue (UHCF) regime. Therefore, in studies dealing with HCF or UHCF, special attention is paid to the evolution of surface degradation during fatigue life. The accelerating structures of the future Compact Linear Collider (CLIC) under study at CERN will be submitted to a high number of thermal-mechanical fatigue cycles, arising from Radio Frequency (RF) induced eddy currents, causing local superficial cyclic heating. The number of cycles during the foreseen lifetime of CLIC reaches 2x10(11). Fatigue may limit the lifetime of CLIC structures. In order to assess the effects of superficial fatigue, specific tests are defined and performed on polycrystalline Oxygen Free Electronic (OFE) grade Copper, a candidate material for the structures. Surface degradation depends on the orientation of near-surface grains. Copper samples thermally fatigued in two different fatigu...

  13. Local radial basis function meshless scheme for vector radiative transfer in participating media with randomly oriented axisymmetric particles.

    Science.gov (United States)

    Sun, Jie; Yi, Hong-Liang; Tan, He-Ping

    2016-02-20

    A local radial basis function meshless scheme (LRBFM) is developed to solve polarized radiative transfer in participating media containing randomly oriented axisymmetric particles in which radial basis functions augmented with polynomial basis are employed to construct the trial functions, and the vector radiative-transfer equation based on the discrete-ordinates approach is discretized directly by collocation method. The LRBFM belongs to a class of truly meshless methods that do not need any mesh or any numerical integration scheme. Performances of the LRBFM are verified with analytical solutions and other numerical results reported earlier in the literature via five various test cases. The predicted angular distribution of brightness temperature and Stokes vector by the LRBFM agree very well with the benchmark. It is demonstrated that the LRBFM is accurate to solve vector radiative transfer in participating media with randomly oriented axisymmetric particles.

  14. Grain-resolved elastic strains in deformed copper measured by three-dimensional X-ray diffraction

    DEFF Research Database (Denmark)

    Oddershede, Jette; Schmidt, Søren; Poulsen, Henning Friis

    2011-01-01

    This X-ray diffraction study reports the grain-resolved elastic strains in about 1000 randomly oriented grains embedded in a polycrystalline copper sample. Diffraction data were collected in situ in the undeformed state and at a plastic strain of 1.5% while the sample was under tensile load...

  15. Whole Grain Intake and Glycaemic Control in Healthy Subjects: A Systematic Review and Meta-Analysis of Randomized Controlled Trials

    Directory of Open Access Journals (Sweden)

    Stefano Marventano

    2017-07-01

    Full Text Available Backgrounds: There is growing evidence from both observational and intervention studies that Whole Grain (WG cereals exert beneficial effects on human health, especially on the metabolic profile. The aim of this study was to perform a meta-analysis of randomised controlled trials (RCT to assess the acute and medium/long-term effect of WG foods on glycaemic control and insulin sensitivity in healthy individuals. Methods: A search for all the published RCT on the effect of WG food intake on glycaemic and insulin response was performed up to December 2016. Effect size consisted of mean difference (MD and 95% CI between the outcomes of intervention and the control groups using the generic inverse-variance random effects model. Results: The meta-analysis of the 14 studies testing the acute effects of WG foods showed significant reductions of the post-prandial values of the glucose iAUC (0–120 min by −29.71 mmol min/L (95% CI: −43.57, −15.85 mmol min/L, the insulin iAUC (0–120 min by −2.01 nmol min/L (95% CI: −2.88, −1.14 nmol min/L, and the maximal glucose and insulin response. In 16 medium- and long-term RCTs, effects of WG foods on fasting glucose and insulin and homeostatic model assessment-insulin resistance values were not significant. Conclusions: The consumption of WG foods is able to improve acutely the postprandial glucose and insulin homeostasis compared to similar refined foods in healthy subjects. Further research is needed to better understand the long-term effects and the biological mechanisms.

  16. 3D random Voronoi grain-based models for simulation of brittle rock damage and fabric-guided micro-fracturing

    Directory of Open Access Journals (Sweden)

    E. Ghazvinian

    2014-12-01

    Full Text Available A grain-based distinct element model featuring three-dimensional (3D Voronoi tessellations (random poly-crystals is proposed for simulation of crack damage development in brittle rocks. The grain boundaries in poly-crystal structure produced by Voronoi tessellations can represent flaws in intact rock and allow for numerical replication of crack damage progression through initiation and propagation of micro-fractures along grain boundaries. The Voronoi modelling scheme has been used widely in the past for brittle fracture simulation of rock materials. However the difficulty of generating 3D Voronoi models has limited its application to two-dimensional (2D codes. The proposed approach is implemented in Neper, an open-source engine for generation of 3D Voronoi grains, to generate block geometry files that can be read directly into 3DEC. A series of Unconfined Compressive Strength (UCS tests are simulated in 3DEC to verify the proposed methodology for 3D simulation of brittle fractures and to investigate the relationship between each micro-parameter and the model's macro-response. The possibility of numerical replication of the classical U-shape strength curve for anisotropic rocks is also investigated in numerical UCS tests by using complex-shaped (elongated grains that are cemented to one another along their adjoining sides. A micro-parameter calibration procedure is established for 3D Voronoi models for accurate replication of the mechanical behaviour of isotropic and anisotropic (containing a fabric rocks.

  17. Segregation-induced ordered superstructures at general grain boundaries in a nickel-bismuth alloy

    Science.gov (United States)

    Yu, Zhiyang; Cantwell, Patrick R.; Gao, Qin; Yin, Denise; Zhang, Yuanyao; Zhou, Naixie; Rohrer, Gregory S.; Widom, Michael; Luo, Jian; Harmer, Martin P.

    2017-10-01

    The properties of materials change, sometimes catastrophically, as alloying elements and impurities accumulate preferentially at grain boundaries. Studies of bicrystals show that regular atomic patterns often arise as a result of this solute segregation at high-symmetry boundaries, but it is not known whether superstructures exist at general grain boundaries in polycrystals. In bismuth-doped polycrystalline nickel, we found that ordered, segregation-induced grain boundary superstructures occur at randomly selected general grain boundaries, and that these reconstructions are driven by the orientation of the terminating grain surfaces rather than by lattice matching between grains. This discovery shows that adsorbate-induced superstructures are not limited to special grain boundaries but may exist at a variety of general grain boundaries, and hence they can affect the performance of polycrystalline engineering alloys.

  18. Task-Oriented Training with Computer Games for People with Rheumatoid Arthritis or Hand Osteoarthritis: A Feasibility Randomized Controlled Trial.

    Science.gov (United States)

    Srikesavan, Cynthia Swarnalatha; Shay, Barbara; Szturm, Tony

    2016-09-13

    To examine the feasibility of a clinical trial on a novel, home-based task-oriented training with conventional hand exercises in people with rheumatoid arthritis or hand osteoarthritis. To explore the experiences of participants who completed their respective home exercise programmes. Thirty volunteer participants aged between 30 and 60 years and diagnosed with rheumatoid arthritis or hand osteoarthritis were proposed for a single-center, assessor-blinded, randomized controlled trial ( ClinicalTrials.gov : NCT01635582). Participants received task-oriented training with interactive computer games and objects of daily life or finger mobility and strengthening exercises. Both programmes were home based and were done four sessions per week with 20 minutes each session for 6 weeks. Major feasibility outcomes were number of volunteers screened, randomized, and retained; completion of blinded assessments, exercise training, and home exercise sessions; equipment and data management; and clinical outcomes of hand function. Reaching the recruitment target in 18 months and achieving exercise compliance >80% were set as success criteria. Concurrent with the trial, focus group interviews explored experiences of those participants who completed their respective programmes. After trial initiation, revisions in inclusion criteria were required to promote recruitment. A total of 17 participants were randomized and 15 were retained. Completion of assessments, exercise training, and home exercise sessions; equipment and data collection and management demonstrated excellent feasibility. Both groups improved in hand function outcomes and exercise compliance was above 85%. Participants perceived both programmes as appropriate and acceptable. Participants who completed task-oriented training also agreed that playing different computer games was enjoyable, engaging, and motivating. Findings demonstrate initial evidence on recruitment, feasibility of trial procedures, and acceptability of

  19. Influence of different nucleation layers on the initial grain structure of multicrystalline silicon ingots

    Science.gov (United States)

    Kupka, I.; Lehmann, T.; Trempa, M.; Kranert, C.; Reimann, C.; Friedrich, J.

    2017-05-01

    The grain structure of high-performance (HP) multicrystalline silicon (mc-Si) is characterized by a small initial grain size with randomly oriented grains and a high length fraction of random grain boundaries. However, the remaining unmelted feedstock at the ingot bottom used as seeding layer for achieving the HP mc-Si properties in the standard crystallization procedure causes yield loss. To overcome this disadvantage, the influence of wetting angle, and surface roughness of non-Si nucleation layers at the crucible bottom on the grain structure properties of mc-Si ingots with a weight of 14.5 kg was investigated and compared to classical HP mc-Si. For that purpose, SiC and SiO2 nucleation layers realized by spraying and embedding of particles with different sizes resulting in different surface morphologies and wetting angles were studied. Nucleation on rough layers of both materials with a root mean square roughness value greater than 100 μm yielded an initially fine grain structure comparable to HP mc-Si. This did not necessarily result in a random orientation distribution and high length fraction of random grain boundaries. Nucleation on SiC layers caused random grain boundary length fractions between 20 and 30% and non-uniform grain distributions. But, nucleation on SiO2 layers yielded increased random grain boundary length fractions between 50 and 70% and homogenous grain distributions, both values are similar to HP mc-Si. These differences are discussed in terms of the thermal conductivity of the different nucleation layers.

  20. Effects of Coping-Oriented Couples Therapy on Depression: A Randomized Clinical Trial

    Science.gov (United States)

    Bodenmann, Guy; Plancherel, Bernard; Beach, Steven R. H.; Widmer, Kathrin; Gabriel, Barbara; Meuwly, Nathalie; Charvoz, Linda; Hautzinger, Martin; Schramm, Elisabeth

    2008-01-01

    The aim of this study was to evaluate the effectiveness of treating depression with coping-oriented couples therapy (COCT) as compared with cognitive-behavioral therapy (CBT; A. T. Beck, C. Ward, & M. Mendelson, 1961) and interpersonal psychotherapy (IPT; M. M. Weissman, J. C. Markowitz, & G. L. Klerman, 2000). Sixty couples, including 1…

  1. Shape dependency of the extinction and absorption cross sections of dust aerosols modeled as randomly oriented spheroids

    Directory of Open Access Journals (Sweden)

    R. Wagner

    2011-09-01

    Full Text Available We present computational results on the shape dependency of the extinction and absorption cross sections of dustlike aerosol particles that were modeled as randomly oriented spheroids. Shape dependent variations in the extinction cross sections are largest in the size regime that is governed by the interference structure. Elongated spheroids best fitted measured extinction spectra of re-dispersed Saharan dust samples. For dust particles smaller than 1.5 μm in diameter and low absorption potential, shape effects on the absorption cross sections are very small.

  2. Multitrait, random regression, or simple repeatability model in high-throughput phenotyping data improve genomic prediction for wheat grain yield

    Science.gov (United States)

    High-throughput phenotyping (HTP) platforms can be used to measure traits that are genetically correlated with wheat (Triticum aestivum L.) grain yield across time. Incorporating such secondary traits in the multivariate pedigree and genomic prediction models would be desirable to improve indirect s...

  3. SILICON CARBIDE GRAIN BOUNDARY DISTRIBUTIONS, IRRADIATION CONDITIONS, AND SILVER RETENTION IN IRRADIATED AGR-1 TRISO FUEL PARTICLES

    Energy Technology Data Exchange (ETDEWEB)

    Lillo, T. M.; Rooyen, I. J.; Aguiar, J. A.

    2016-11-01

    Precession electron diffraction in the transmission electron microscope was used to map grain orientation and ultimately determine grain boundary misorientation angle distributions, relative fractions of grain boundary types (random high angle, low angle or coincident site lattice (CSL)-related boundaries) and the distributions of CSL-related grain boundaries in the SiC layer of irradiated TRISO-coated fuel particles. Two particles from the AGR-1 experiment exhibiting high Ag-110m retention (>80%) were compared to a particle exhibiting low Ag-110m retention (<19%). Irradiated particles with high Ag-110m retention exhibited a lower fraction of random, high angle grain boundaries compared to the low Ag-110m retention particle. An inverse relationship between the random, high angle grain boundary fraction and Ag-110m retention is found and is consistent with grain boundary percolation theory. Also, comparison of the grain boundary distributions with previously reported unirradiated grain boundary distributions, based on SEM-based EBSD for similarly fabricated particles, showed only small differences, i.e. a greater low angle grain boundary fraction in unirradiated SiC. It was, thus, concluded that SiC layers with grain boundary distributions susceptible to Ag-110m release were present prior to irradiation. Finally, irradiation parameters were found to have little effect on the association of fission product precipitates with specific grain boundary types.

  4. Mode-converted ultrasonic scattering in polycrystals with elongated grains.

    Science.gov (United States)

    Arguelles, Andrea P; Kube, Christopher M; Hu, Ping; Turner, Joseph A

    2016-09-01

    Elastic wave scattering is used to study polycrystalline media for a wide range of applications. Received signals, which include scattering from the randomly oriented grains comprising the polycrystal, contain information from which useful microstructural parameters may often be inferred. Recently, a mode-converted diffuse ultrasonic scattering model was developed for evaluating the scattered response of a transverse wave from an incident longitudinal wave in a polycrystalline medium containing equiaxed single-phase grains with cubic elastic symmetry. In this article, that theoretical mode-converted scattering model is modified to account for grain elongation within the sample. The model shows the dependence on scattering angle relative to the grain axis orientation. Experimental measurements were performed on a sample of 7475-T7351 aluminum using a pitch-catch transducer configuration. The results show that the mode-converted scattering can be used to determine the dimensions of the elongated grains. The average grain shape determined from the experimental measurements is compared with dimensions extracted from electron backscatter diffraction, an electron imaging technique. The results suggest that mode-converted diffuse ultrasonic scattering has the potential to quantify detailed information about grain microstructure.

  5. Economic evaluation of schema therapy and clarification-oriented psychotherapy for personality disorders: a multicenter, randomized controlled trial.

    Science.gov (United States)

    Bamelis, Lotte L M; Arntz, Arnoud; Wetzelaer, Pim; Verdoorn, Ryanne; Evers, Silvia M A A

    2015-11-01

    To compare from a societal perspective the cost-effectiveness and cost-utility of schema therapy, clarification-oriented psychotherapy, and treatment as usual for patients with avoidant, dependent, obsessive-compulsive, paranoid, histrionic, and/or narcissistic personality disorder. A multicenter, randomized controlled trial, single-blind parallel design, was conducted between May 2006 and December 2011 in 12 Dutch mental health institutes. Data from 320 patients (diagnosed according to DSM-IV criteria) randomly assigned to schema therapy (n = 145), treatment as usual (n = 134), or clarification-oriented psychotherapy (n = 41) were analyzed. Costs were repeatedly measured during 36 months by interview and patient registries. Primary outcome measures were proportion of recovered patients as measured with the Structured Clinical Interview for DSM-IV Axis II Personality Disorders for the cost-effectiveness analysis, and quality-adjusted life-years (QALYs) for the cost-utility analysis. Bootstrap replications in the cost-effectiveness and the cost-utility planes were used to estimate the probability that one treatment was more cost-effective than the other. Mixed gamma regression on net monetary benefit for different levels of willingness to pay for extra effects was used as sensitivity analysis. Additional sensitivity analyses were done to assess robustness of the results. Due to higher clinical effects and lower costs, schema therapy was dominant over the other treatments in the cost-effectiveness analyses. Schema therapy has the probability of being the most cost-effective treatment (78% at €0 to 96% at €37,500 [$27,375] willingness to pay per extra recovery). Treatment as usual was more cost-effective than clarification-oriented psychotherapy due to lower costs. In the cost-utility analysis, schema therapy had a stable 75% probability of being cost-effective. Sensitivity analyses confirmed these findings. The results support the cost-effectiveness of schema

  6. Highly efficient hybrid energy generator: coupled organic photovoltaic device and randomly oriented electrospun poly(vinylidene fluoride) nanofiber.

    Science.gov (United States)

    Park, Boongik; Lee, Kihwan; Park, Jongjin; Kim, Jongmin; Kim, Ohyun

    2013-03-01

    A hybrid architecture consisting of an inverted organic photovoltaic device and a randomly-oriented electrospun PVDF piezoelectric device was fabricated as a highly-efficient energy generator. It uses the inverted photovoltaic device with coupled electrospun PVDF nanofibers as tandem structure to convert solar and mechanical vibrations energy to electricity simultaneously or individually. The power conversion efficiency of the photovoltaic device was also significantly improved up to 4.72% by optimized processes such as intrinsic ZnO, MoO3 and active layer. A simple electrospinning method with the two electrode technique was adopted to achieve a high voltage of - 300 mV in PVDF piezoelectric fibers. Highly-efficient HEG using voltage adder circuit provides the conceptual possibility of realizing multi-functional energy generator whenever and wherever various energy sources are available.

  7. Resource-oriented coaching for reduction of examination-related stress in medical students: an exploratory randomized controlled trial.

    Science.gov (United States)

    Kötter, Thomas; Niebuhr, Frank

    2016-01-01

    The years spent in acquiring medical education is considered a stressful period in the life of many students. Students whose mental health deteriorates during this long period of study are less likely to become empathic and productive physicians. In addition to other specific stressors, academic examinations seem to further induce medical school-related stress and anxiety. Combined group and individual resource-oriented coaching early in medical education might reduce examination-related stress and anxiety and, consequently, enhance academic performance. Good quality evidence, however, remains scarce. In this study, therefore, we explored the question of whether coaching affects examination-related stress and health in medical students. We conducted a randomized controlled trial. Students who registered for the first medical academic examination in August 2014 at the University of Lübeck were recruited and randomized into three groups. The intervention groups 1 and 2 received a 1-hour psychoeducative seminar. Group 1 additionally received two 1-hour sessions of individual coaching during examination preparation. Group 3 served as a control group. We compared changes in self-rated general health (measured by a single item), anxiety and depression (measured by the hospital anxiety and depression scale), as well as medical school stress (measured by the perceived medical school stress instrument). In order to further investigate the influence of group allocation on perceived medical school stress, we conducted a linear regression analysis. We saw a significant deterioration of general health and an increase in anxiety and depression scores in medical students while preparing for an examination. We found a small, but statistically significant, effect of group allocation on the development of perceived medical school stress. However, we could not differentiate between the effects of group coaching only and group coaching in combination with two sessions of individual

  8. Object-oriented Markov random model for classification of high resolution satellite imagery based on wavelet transform

    Science.gov (United States)

    Hong, Liang; Liu, Cun; Yang, Kun; Deng, Ming

    2013-07-01

    The high resolution satellite imagery (HRSI) have higher spatial resolution and less spectrum number, so there are some "object with different spectra, different objects with same spectrum" phenomena. The objective of this paper is to utilize the extracted features of high resolution satellite imagery (HRSI) obtained by the wavelet transform(WT) for segmentation. WT provides the spatial and spectral characteristics of a pixel along with its neighbors. The object-oriented Markov random Model in the wavelet domain is proposed in order to segment high resolution satellite imagery (HRSI). The proposed method is made up of three blocks: (1) WT-based feature extrcation.the aim of extraction of feature using WT for original spectral bands is to exploit the spatial and frequency information of the pixels; (2) over-segmentation object generation. Mean-Shift algorithm is employed to obtain over-segmentation objects; (3) classification based on Object-oriented Markov Random Model. Firstly the object adjacent graph (OAG) can be constructed on the over-segmentation objects. Secondly MRF model is easily defined on the OAG, in which WT-based feature of pixels are modeled in the feature field model and the neighbor system, potential cliques and energy functions of OAG are exploited in the labeling model. Experiments are conducted on one HRSI dataset-QuickBird images. We evaluate and compare the proposed approach with the well-known commercial software eCognition(object-based analysis approach) and Maximum Likelihood(ML) based pixels. Experimental results show that the proposed the method in this paper obviously outperforms the other methods.

  9. Magnetic localization and orientation of the capsule endoscope based on a random complex algorithm

    Directory of Open Access Journals (Sweden)

    He XQ

    2015-04-01

    Full Text Available Xiaoqi He,1 Zizhao Zheng,1,2 Chao Hu1 1Ningbo Institute of Technology, Zhejiang University, Ningbo, People's Republic of China; 2Taiyuan University of Science and Technology, Taiyuan, People's Republic of China Abstract: The development of the capsule endoscope has made possible the examination of the whole gastrointestinal tract without much pain. However, there are still some important problems to be solved, among which, one important problem is the localization of the capsule. Currently, magnetic positioning technology is a suitable method for capsule localization, and this depends on a reliable system and algorithm. In this paper, based on the magnetic dipole model as well as magnetic sensor array, we propose nonlinear optimization algorithms using a random complex algorithm, applied to the optimization calculation for the nonlinear function of the dipole, to determine the three-dimensional position parameters and two-dimensional direction parameters. The stability and the antinoise ability of the algorithm is compared with the Levenberg–Marquart algorithm. The simulation and experiment results show that in terms of the error level of the initial guess of magnet location, the random complex algorithm is more accurate, more stable, and has a higher “denoise” capacity, with a larger range for initial guess values. Keywords: wireless capsule endoscope, magnet, optimization 

  10. Determination of grain boundary mobility during recrystallization by statistical evaluation of electron backscatter diffraction measurements

    Energy Technology Data Exchange (ETDEWEB)

    Basu, I., E-mail: basu@imm.rwth-aachen.de; Chen, M.; Loeck, M.; Al-Samman, T.; Molodov, D.A.

    2016-07-15

    One of the key aspects influencing microstructural design pathways in metallic systems is grain boundary motion. The present work introduces a method by means of which direct measurement of grain boundary mobility vs. misorientation dependence is made possible. The technique utilizes datasets acquired by means of serial electron backscatter diffraction (EBSD) measurements. The experimental EBSD measurements are collectively analyzed, whereby datasets were used to obtain grain boundary mobility and grain aspect ratio with respect to grain boundary misorientation. The proposed method is further validated using cellular automata (CA) simulations. Single crystal aluminium was cold rolled and scratched in order to nucleate random orientations. Subsequent annealing at 300 °C resulted in grains growing, in the direction normal to the scratch, into a single deformed orientation. Growth selection was observed, wherein the boundaries with misorientations close to Σ7 CSL orientation relationship (38° 〈111〉) migrated considerably faster. The obtained boundary mobility distribution exhibited a non-monotonic behavior with a maximum corresponding to misorientation of 38° ± 2° about 〈111〉 axes ± 4°, which was 10–100 times higher than the mobility values of random high angle boundaries. Correlation with the grain aspect ratio values indicated a strong growth anisotropy displayed by the fast growing grains. The observations have been discussed in terms of the influence of grain boundary character on grain boundary motion during recrystallization. - Highlights: • Statistical microstructure method to measure grain boundary mobility during recrystallization • Method implementation independent of material or crystal structure • Mobility of the Σ7 boundaries in 5N Al was calculated as 4.7 × 10{sup –8} m{sup 4}/J ⋅ s. • Pronounced growth selection in the recrystallizing nuclei in Al • Boundary mobility values during recrystallization 2–3 orders of

  11. Interface Orientation Distribution during Grain Growth in Bulk SrTiO3 Measured by Means of 3D X-Ray Diffraction Contrast Tomography

    DEFF Research Database (Denmark)

    Syha, Melanie; Rheinheimer, Wolfgang; Bäurer, Michael

    2012-01-01

    3D x-ray diffraction contrast tomography (DCT) is a non-destructive technique for the determination of grain shape and crystallography in polycrystalline bulk materials. Using this technique, a strontium titanate specimen was repeatedly measured between annealing steps.. A systematic analysis...

  12. Contribution of grain boundary related strain accommodation to deformation of ultrafine-grained palladium

    Energy Technology Data Exchange (ETDEWEB)

    Ivanisenko, Yu., E-mail: julia.ivanisenko@kit.edu [Karlsruhe Institute of Technology, Institute of Nanotechnology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); Enikeev, N.A. [Institute of Physics of Advanced Materials, Ufa State Aviation Technical University, K. Marx Str. 12, 450000 Ufa (Russian Federation); Laboratory for Mechanics of Bulk Nanostructured Materials, Saint Petersburg State University, Universitetsky Prospekt 28, Peterhof, 198504 Saint Petersburg (Russian Federation); Yang, K. [Robert Bosch GmbH, AE/EAI2, D71701 Schwieberdingen (Germany); Smoliakov, A.; Soloviev, V.P. [Russian Federal Nuclear Center All-Russian Research Institute of Experimental Physics (VNIIEF), Mira Ave, 37, 607188 Sarov (Russian Federation); Fecht, H. [Institut für Mikro, und Nanomaterialien, Universität Ulm, D-89081 Ulm (Germany); Hahn, H. [Karlsruhe Institute of Technology, Institute of Nanotechnology, Hermann-von-Helmholtz-Platz 1, 76344 Eggenstein-Leopoldshafen (Germany); KIT-TUD Joint Research Laboratory Nanomaterials, Technische Universität Darmstadt, D-64287 Darmstadt (Germany)

    2016-06-21

    Ultrafine-grained Pd specimens with a mean grain size of 130 nm were compressed by 10% in a scanning electron microscope and the strain-induced change in orientations of grains was measured by in-situ electron-backscattering diffraction. A comparison of grain orientations before and after compression straining revealed substantial grain rotations. The analysis of the results performed using polycrystal plasticity simulation showed that the variation of orientations with strain cannot be explained only by crystallographic dislocation slip. A large portion of strain is proved to be accommodated via cooperative non-crystallographic grain rotation.

  13. Emergency Department Management of Sepsis Patients: A Randomized, Goal-Oriented, Noninvasive Sepsis Trial.

    Science.gov (United States)

    Kuan, Win Sen; Ibrahim, Irwani; Leong, Benjamin S H; Jain, Swati; Lu, Qingshu; Cheung, Yin Bun; Mahadevan, Malcolm

    2016-03-01

    The noninvasive cardiac output monitor and passive leg-raising maneuver has been shown to be reasonably accurate in predicting fluid responsiveness in critically ill patients. We examine whether using a noninvasive protocol would result in more rapid lactate clearance after 3 hours in patients with severe sepsis and septic shock in the emergency department. In this open-label randomized controlled trial, 122 adult patients with sepsis and serum lactate concentration of greater than or equal to 3.0 mmol/L were randomized to receive usual care or intravenous fluid bolus administration guided by measurements of change of stroke volume index, using the noninvasive cardiac output monitor after passive leg-raising maneuver. The primary outcome was lactate clearance of more than 20% at 3 hours. Secondary outcomes included mortality, length of hospital and ICU stay, and total hospital cost. Analysis was intention to treat. Similar proportions of patients in the randomized intervention group (70.5%; N=61) versus control group (73.8%; N=61) achieved the primary outcome, with a relative risk of 0.96 (95% confidence interval [CI] 0.77 to 1.19). Secondary outcomes were similar in both groups (P>.05 for all comparisons). Hospital mortality occurred in 6 patients (9.8%) each in the intervention and control groups on or before 28 days (relative risk=1.00; 95% CI 0.34 to 2.93). Among a subgroup of patients with underlying fluid overload states, those in the intervention group tended to receive clinically significantly more intravenous fluids at 3 hours (difference=975 mL; 95% CI -450 to 1,725 mL) and attained better lactate clearance (difference=19.7%; 95% CI -34.6% to 60.2%) compared with the control group, with shorter hospital lengths of stay (difference=-4.5 days; 95% CI -9.5 to 2.5 days). Protocol-based fluid resuscitation of patients with severe sepsis and septic shock with the noninvasive cardiac output monitor and passive leg-raising maneuver did not result in better

  14. Grain- to multiple-grain-scale deformation processes during diffusion creep of forsterite + diopside aggregate: 1. Direct observations

    Science.gov (United States)

    Maruyama, G.; Hiraga, T.

    2017-08-01

    We uniaxially deformed fine-grained ( 1 μm) forsterite + diopside (5 and 20 vol %) aggregates in the diffusion creep regime. Prior to deformation, line markers were milled on a lateral surface of a cylindrical sample to detect single- to multiple-grain-scale deformation. We performed deformation experiments and observations of the marker-etched surface after sample cooling multiple times on the same specimens. The strain measured at the scale of several tens of grains from macroscopic shortening of the markers parallel to the compression axis is consistent with the total strain of the sample. However, microscopically, the markers are intensely segmented and rotated at the grain scale increasing with the sample strain. Meanwhile, essentially, no deformation is observed within the grains in most of the samples. The surface microstructures, including the deformation of the markers, reveal the serial operations of grain boundary migration, grain boundary sliding, rigid body grain rotation, and grain neighbor switching, which correspond well to processes expected in diffusion-controlled superplasticity. This sequence is commonly observed in both samples consisting of forsterite grains of tabular and equiaxed grain shapes, which have been shown to develop notable crystallographic preferred orientation (CPO) and random (or weak) CPO, respectively, during diffusion creep. Intragranular regions of relatively larger forsterite grains in the specimens deformed at stresses near the transition between deformation mechanisms from diffusion creep to dislocation creep reveal marker deformation and formation of surface creases and subgrain boundaries, which indicate intragranular dislocation processes. Overall, the surface microstructures reflect the deformation state of the materials well.

  15. Consumption of red and processed meat and refined grains for 4weeks decreases insulin sensitivity in insulin-resistant adults: A randomized crossover study.

    Science.gov (United States)

    Kim, Yoona; Keogh, Jennifer B; Clifton, Peter M

    2017-03-01

    Red and processed meat and refined grains are associated with an increased risk of type 2 diabetes. Interventions are limited. We hypothesized that a diet high in red and processed meat and refined grains (HMD) would decrease insulin sensitivity compared to a diet high in whole grains, nuts, dairy and legumes with no red meat (HWD). Forty-nine subjects without diabetes [15 men and 34 women, age, 35.6±15.7 years, body mass index (BMI), 27±5.9kg/m(2)] underwent two 4-week weight-stable dietary interventions in a randomized crossover design. The insulin sensitivity index (ISI) was calculated from the last 30min of a continuous low-dose insulin (25mU/kg·h) and glucose (4mg/kg·min) infusion test (LDIGIT 120-150min) at the end of each diet. The population fell into two very discrete groups: those with a very low insulin response in the LDIGIT 120-150min on HMD (Group 156pmol/L, n=25). Group 2 had significantly higher insulin concentrations [(median and interquartile range) 153, 180 for HMD vs. 123, 149pmol/L for HWD; P=0.019] and glucose concentrations [(mean±standard deviation) 7.4±1.3 for HMD vs.6.7±1.2mmol/L for HWD; P=0.05], resulting in a significantly decreased ISI [(median and interquartile range) 21.1, 34.2 for HMD vs. 31.6, 39.4 for HWD; P=0.014] compared to HWD. Log ISI after HMD was significantly correlated with BMI (r=-0.5; P=0.009), fat mass (r=-0.55; P=0.004) and self-reported activity levels (r=-0.45; P=0.024). A dietary pattern high in red and processed meat and refined grains decreased insulin sensitivity compared to a dietary pattern high in whole grains, nuts, dairy products and legumes only in relatively insulin-resistant adults. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. Whole-Grain Rye and Wheat Affect Some Markers of Gut Health without Altering the Fecal Microbiota in Healthy Overweight Adults: A 6-Week Randomized Trial.

    Science.gov (United States)

    Vuholm, Stine; Nielsen, Dennis S; Iversen, Kia Nøhr; Suhr, Julie; Westermann, Peter; Krych, Lukasz; Andersen, Jens Rikardt; Kristensen, Mette

    2017-11-01

    Background: Whole grains have shown potential for improving gut health, but evidence comparing different whole-grain types is lacking.Objective: We investigated whether whole-grain wheat (WGW) and whole-grain rye (WGR) improve gut health in different ways compared to refined wheat (RW), with the primary outcomes of microbiota composition and gastrointestinal (GI) symptoms.Methods: In a randomized parallel trial, 70 healthy adults (in means ± SDs; aged 51.0 ± 9.4 y, body mass index [BMI (in kg/m2)] 27.8 ± 1.9, 32:38 men:women) replaced cereal foods from their habitual diet with WGR, WGW, or RW (control). Before and after a 6-wk intervention, a spot stool sample was collected and analyzed for short-chain fatty acids and microbiota composition through the use of 16S ribosomal RNA gene-targeted high-throughput amplicon sequencing. GI symptoms and stool regularity were evaluated by questionnaires at baseline and after weeks 2, 4, and 6.Results: Intakes of whole grains were 145.2 ± 75.9, 124.2 ± 57.3, and 5.4 ± 3.2 g/d in the WGW, WGR, and RW groups, respectively. Gut microbiota composition was not affected by diet. The relative change in fecal butyrate decreased in the RW (-38%) group compared to the WGW (25%, P = 0.014) and WGR groups (-1%, P = 0.037). Other short-chain fatty acids were unaffected. Flatulence was more frequent following intake of WGW (OR: 2.06, 95% CI: 1.03, 4.17) and WGR (OR: 2.62, 95% CI: 1.35, 5.22) compared to RW, whereas bloating was less frequent following WGW (OR: 0.38, 95% CI: 0.18, 0.80) and WGR (OR: 0.34, 95% CI: 0.16, 0.72). Stool frequency increased following WGR but not WGW, compared to RW in weeks 2 (0.4 defecations/d, P = 0.049) and 4 (0.5 defecations/d, P = 0.043), but not in week 6. The WGW and WGR groups did not differ from each other in any of the variables tested.Conclusion: Regular consumption of WGR and WGW affected fecal butyrate concentration and gastrointestinal symptoms in healthy overweight adults, supporting the

  17. Bi-functional nonlinearities in monodisperse ZnO nano-grains – Self-consistent transport and random lasing

    Energy Technology Data Exchange (ETDEWEB)

    Lubatsch, Andreas [Georg-Simon-Ohm University of Applied Sciences, Keßlerplatz 12, 90489 Nürnberg (Germany); Frank, Regine, E-mail: r.frank@uni-tuebingen.de [Institute for Theoretical Physics, Optics and Photonics, Eberhard-Karls-Universität, Auf der Morgenstelle 14, 72076 Tübingen (Germany)

    2014-08-20

    We report a quantum field theoretical description of light transport and random lasing. The Bethe-Salpeter equation is solved including maximally crossed diagrams and non-elastic scattering. This is the first theoretical framework that combines so called off-shell scattering and lasing in random media. We present results for the self-consistent scattering mean free path that varies over the width of the sample. Further we discuss the density dependent correlation length of self-consistent transport in disordered media composed of semi-conductor Mie scatterers.

  18. Monte Carlo study on abnormal growth of Goss grains in Fe-3%Si steel induced by second-phase particles

    Science.gov (United States)

    Xin, Dong-qun; He, Cheng-xu; Gong, Xue-hai; Wang, Hao; Meng, Li; Ma, Guang; Hou, Peng-fei; Zhang, Wen-kang

    2016-12-01

    The selective abnormal growth of Goss grains in magnetic sheets of Fe-3%Si (grade Hi-B) induced by second-phase particles (AlN and MnS) was studied using a modified Monte Carlo Potts model. The starting microstructures for the simulations were generated from electron backscatter diffraction (EBSD) orientation imaging maps of recrystallized samples. In the simulation, second-phase particles were assumed to be randomly distributed in the initial microstructures and the Zener drag effect of particles on Goss grain boundaries was assumed to be selectively invalid because of the unique properties of Goss grain boundaries. The simulation results suggest that normal growth of the matrix grains stagnates because of the pinning effect of particles on their boundaries. During the onset of abnormal grain growth, some Goss grains with concave boundaries in the initial microstructure grow fast abnormally and other Goss grains with convex boundaries shrink and eventually disappear.

  19. Characterization of Grain Amaranth (Amaranthus spp. Germplasm in South West Nigeria Using Morphological, Nutritional, and Random Amplified Polymorphic DNA (RAPD Analysis

    Directory of Open Access Journals (Sweden)

    Pamela E. Akin-Idowu

    2016-01-01

    Full Text Available Efficient utilization of plant genetic resources for nutrition and crop improvement requires systematic understanding of the important traits. Amaranthus species are distributed worldwide with an interesting diversity of landraces and cultivars whose leaves and seeds are consumed. Despite their potential to enhance food security and economic livelihoods, grain amaranth breeding to improve nutritional quality and adoption by farmers in sub-Saharan Africa is scanty. This study assessed the variation among 29 grain amaranth accessions using 27 phenotypic (10 morphological and 17 nutritional characters and 16 random amplified polymorphic DNA (RAPD primers. Multivariate analysis of phenotypic characters showed the first four principal components contributing 57.53% of observed variability, while cluster analysis yielded five groups at 87.5% similarity coefficient. RAPD primers generated a total of 193 amplicons with an average of 12.06 amplicons per primer, 81% of which were polymorphic. Genetic similarities based on Jaccard’s coefficient ranged from 0.61 to 0.88. The RAPD-based unweighted pair group method with arithmetic mean dendrogram grouped the accessions into nine clusters, with the same species clustering together. RAPD primers distinguished the accessions more effectively than phenotypic markers. Accessions in the different clusters as obtained can be exploited for heterotic gain in desired nutritional traits.

  20. “To see a world in a grain of sand”: Towards Future-oriented What-If Analysis in Narrative Research

    NARCIS (Netherlands)

    Sools, Anna Maria

    2012-01-01

    In this article, I explore narrative building blocks for future-oriented what-if (i.e., possibilities-generating) analysis developed in a health promotion study. The aim of this study was to gain insight into future possibilities for good health among participants known for their poor health status.

  1. Special Grain Boundaries in Ultrafine-Grained Tungsten

    Science.gov (United States)

    Dudka, O. V.; Ksenofontov, V. A.; Sadanov, E. V.; Starchenko, I. V.; Mazilova, T. I.; Mikhailovskij, I. M.

    2016-07-01

    Field ion microscopy and computer simulation were used for the study of an atomic structure high-angle grain boundary in hard-drawn ultrafine-grained tungsten wire. These boundaries with special misorientations are beyond the scope of the coincident site lattice model. It was demonstrated that the special non-coincident grain boundaries are the plane-matching boundaries, and rigid-body displacements of adjacent nanograins are normal to the misorientation axis. The vectors of rigid-body translations of grains are described by broad asymmetric statistical distribution. Mathematical modeling showed that special incommensurate boundaries with one grain oriented along the {211} plane have comparatively high cohesive energies. The grain-boundary dislocations ½ were revealed and studied at the line of local mismatch of {110} atomic planes of adjacent grains.

  2. Resource-oriented coaching for reduction of examination-related stress in medical students: an exploratory randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Kötter T

    2016-08-01

    Full Text Available Thomas Kötter,1 Frank Niebuhr2 1Institute of Social Medicine and Epidemiology, 2Institute of Family Medicine, University of Lübeck, Lübeck, Germany Introduction: The years spent in acquiring medical education is considered a stressful period in the life of many students. Students whose mental health deteriorates during this long period of study are less likely to become empathic and productive physicians. In addition to other specific stressors, academic examinations seem to further induce medical school-related stress and anxiety. Combined group and individual resource-oriented coaching early in medical education might reduce examination-related stress and anxiety and, consequently, enhance academic performance. Good quality evidence, however, remains scarce. In this study, therefore, we explored the question of whether coaching affects examination-related stress and health in medical students.Methods: We conducted a randomized controlled trial. Students who registered for the first medical academic examination in August 2014 at the University of Lübeck were recruited and randomized into three groups. The intervention groups 1 and 2 received a 1-hour psychoeducative seminar. Group 1 additionally received two 1-hour sessions of individual coaching during examination preparation. Group 3 served as a control group. We compared changes in self-rated general health (measured by a single item, anxiety and depression (measured by the hospital anxiety and depression scale, as well as medical school stress (measured by the perceived medical school stress instrument. In order to further investigate the influence of group allocation on perceived medical school stress, we conducted a linear regression analysis.Results: We saw a significant deterioration of general health and an increase in anxiety and depression scores in medical students while preparing for an examination. We found a small, but statistically significant, effect of group allocation on

  3. The effect of integrated emotion-oriented care versus usual care on elderly persons with dementia in the nursing home and on nursing assistants: a randomized clinical trial

    NARCIS (Netherlands)

    Finnema, E.J.; Dr�es, R.M.; Ettema, T.P.; Ooms, M.E.; Adèr, H.J.; Ribbe, M.W.; van Tilburg, W.

    2005-01-01

    Objectives: To examine the effect of integrated emotion-oriented care on nursing home residents with dementia and nursing assistants. Design: A multi-site randomized clinical trial with matched groups, and measurements at baseline and after seven months. Setting: Sixteen psychogeriatric wards in

  4. The effect of integrated emotion-oriented care versus usual care on elderly persons with dementia in the nursing home and on nursing assistants: a randomized clinical trial

    NARCIS (Netherlands)

    Finnema, E.J.; Dr�es, R.M.; Ettema, T.P.; Ooms, M.E.; Adèr, H.J.; Ribbe, M.W.; Tilburg, van W.

    2005-01-01

    OBJECTIVES: To examine the effect of integrated emotion-oriented care on nursing home residents with dementia and nursing assistants. DESIGN: A multi-site randomized clinical trial with matched groups, and measurements at baseline and after seven months. SETTING: Sixteen psychogeriatric wards in

  5. Standard practice for X-Ray determination of retained austenite in steel with near random crystallographic orientation

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2003-01-01

    1.1 This practice covers the determination of retained austenite phase in steel using integrated intensities (area under peak above background) of X-ray diffraction peaks using chromium Kα or molybdenum Kα X-radiation. 1.2 The method applies to carbon and alloy steels with near random crystallographic orientations of both ferrite and austenite phases. 1.3 This practice is valid for retained austenite contents from 1 % by volume and above. 1.4 If possible, X-ray diffraction peak interference from other crystalline phases such as carbides should be eliminated from the ferrite and austenite peak intensities. 1.5 Substantial alloy contents in steel cause some change in peak intensities which have not been considered in this method. Application of this method to steels with total alloy contents exceeding 15 weight % should be done with care. If necessary, the users can calculate the theoretical correction factors to account for changes in volume of the unit cells for austenite and ferrite resulting from vari...

  6. strain partitioning and dimensional preferred orientation in a syn

    African Journals Online (AJOL)

    Administrator

    grain orientation. Calculated values of strain–arithmetic mean R, geometric mean G and harmonic mean H, show minimum strain for grains in E-W orientation and maximum strain for grains in N-S orientation. Phenocrysts in NE-SW and NW-SE orientations showed intermediate values of strain, with the latter axis having ...

  7. Determination of grain boundary geometry using TEM

    NARCIS (Netherlands)

    Jang, H.; Farkas, D.; Hosson, J.T.M. De

    An experimental method to obtain the grain boundary geometry using the transmission electron microscope is presented. The method allows Σ determination including grain boundary plane orientation. In order to determine the specialness of the grain boundary, three different criteria for maximum

  8. Orientation and thickness dependence of magnetic levitation force and trapped magnetic field of single grain YBa{sub 2}Cu{sub 3}O{sub 7-y} bulk superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Jung, Y.; Go, S. J.; Joo, H. T. [Korea Science Academy of Korea Advanced Institute of Science and Technology, Pusan (Korea, Republic of); Lee, Y. J.; Park, S. D.; Jun, B. H.; KIm, C. J. [Neutron Utilization Technology Division, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2017-03-15

    The effects of the crystallographic orientation and sample thickness on the magnetic levitation forces (F) and trapped magnetic field (B) of single grain YBCO bulk superconductors were examined. Single grain YBCO samples with a (001), (110) or (100) surface were used as the test samples. The samples used for the force-distance (F-d) measurement were cooled at 77 K without a magnetic field (zero field cooling, ZFC), whereas the samples used for the B measurement were cooled under the external magnetic field of a Nd-B-Fe permanent magnet (field cooling, FC). It was found that F and B of the (001) surface were higher than those of the (110) or (100) surface, which is attributed to the higher critical current density (J{sub c}) of the (001) surface. For the (001) samples with t=5–18 mm, the maximum magnetic levitation forces (F{sub max}s) of the ZFC samples were larger than 40 N. About 80% of the applied magnetic field was trapped in the FC samples. However, the F and B decreased rapidly as t decreased below 5 mm. There exists a critical sample thickness (t=5 mm for the experimental condition of this study) for maintaining the large levitation/trapping properties, which is dependent on the material properties and magnitude of the external magnetic fields.

  9. Texture measurements in fine grained polyphase aggregates

    Science.gov (United States)

    Kilian, R.; Heilbronner, R.; Stünitz, H.

    2009-04-01

    When analyzing natural and experimental microstructures, we routinely use the two methods for orientation imaging and texture measurements: (a) the computer-integrated polarization microscopy (CIP, Panozzo Heilbronner & Pauli, 1993) and (b) the electron back scatter diffractometry (EBSD, e.g. Kunze et al., 1994). The CIP method yields orientation maps and pole figures of c-axes (of uni-axial materials), while the EBSD method yields complete textural data for all crystallographic orientations. In order to compare the orientation images the Euler maps (obtained from EBSD) are recalculated and presented with the more intuitive colour look-up tables (CLUTs) of the CIP method. In this contribution we compare and contrast the results achieved by these two methods using two different samples taken from a metagranodiorite (Kilian et al., 2009): (1) a coarse grained mylonitic rock with polycrystalline quartz aggregates and (2) a very fine grained ultramylonitic rock with single quartz grains dispersed in a polymineralic matrix. For the coarse grained sample (1) both methods yield the same (strong) c-axis pole figure: the geometry of the c-axis polefigure as well as the texture intensity (maximum of polefigure) are identical. The texture of sample (2) - where small quartz grains are dispersed in the polymineralic matrix - is very weak to random. The CIP and EBSD c-axis pole figures are different and - as noted previously - these differences arise from a machine specific bias of the EBSD (Schmocker 2002). In addition to texture analysis, both methods are capable of image segmentation (identification and separation of individual grains in the orientation image) as well as shape and grain size analysis. However due to the entirely different approach taken, the results may differ significantly. For example, when deriving the grain size distribution for sample (2) EBSD (combined with with the OIM® analysis software) yields a positively skewed histogram (with the mode occurring

  10. Effect of oriental medicine music therapy on patients with Hwa-byung: a study protocol for a randomized controlled trial.

    Science.gov (United States)

    Park, Jeong-Su; Park, Sunju; Cheon, Chun-Hoo; Jang, Bo-Hyoung; Lee, Song-Hee; Lee, Seung-Hyun; Chung, Sun-Yong; Kim, Jong-Woo; Jeon, Chan-Yong; Park, Jong-Hyeong; Shin, Yong-Cheol; Ko, Seong-Gyu

    2012-09-11

    Hwa-byung, a Korean culture-bound syndrome with both psychological and somatic symptoms, is also known as 'anger syndrome'. It includes various physical symptoms including anxiety, a feeling of overheating, a sensation of pressure on the chest, heart palpitations, respiratory stuffiness, insomnia, and anxiety. The proposed study is a single-center, double-blind, randomized, controlled trial with two parallel arms: an oriental medicine music therapy (OMMT) group and a control music therapy (CMT) group. In total, 48 patients will be enrolled into the trial. The first visit will be the screening visit. At baseline (visit 2), all participants fulfilling both the inclusion and the exclusion criteria will be split and randomly divided into two equal groups: the OMMT and the CMT (n = 24 each). Each group will receive treatment sessions over the course of 4 weeks, twice per week, for eight sessions in total. The primary outcome is the State-Trait Anxiety Inventory (STAI), and the secondary outcomes are the Hwa-byung scale (H-scale), the Center for Epidemiologic Studies Depression Scale (CES-D), the Hwa-byung visual analogue scale (H-VAS) for primary symptoms, the World Health Organization Quality of Life scale, brief version (WHOQOL-BREF), and levels of salivary cortisol. Patients will be asked to complete questionnaires at the baseline visit (visit 2), after the last treatment session (visit 9), and at 4 weeks after the end of all trial sessions (visit 10). From the baseline (visit 2) through the follow-up (visit 10), the entire process will take a total of 53 days. This proposed study targets patients with Hwa-byung, especially those who have exhibited symptoms of anxiety. Therefore, the primary outcome is set to measure the level of anxiety. OMMT is music therapy combined with traditional Korean medicinal theories. Unlike previously reported music therapies, for which patients simply listen to music passively, in OMMT, patients actively move their bodies and play the

  11. Effect of oriental medicine music therapy on patients with Hwa-byung: a study protocol for a randomized controlled trial

    Science.gov (United States)

    2012-01-01

    Background Hwa-byung, a Korean culture-bound syndrome with both psychological and somatic symptoms, is also known as ‘anger syndrome’. It includes various physical symptoms including anxiety, a feeling of overheating, a sensation of pressure on the chest, heart palpitations, respiratory stuffiness, insomnia, and anxiety. Methods/design The proposed study is a single-center, double-blind, randomized, controlled trial with two parallel arms: an oriental medicine music therapy (OMMT) group and a control music therapy (CMT) group. In total, 48 patients will be enrolled into the trial. The first visit will be the screening visit. At baseline (visit 2), all participants fulfilling both the inclusion and the exclusion criteria will be split and randomly divided into two equal groups: the OMMT and the CMT (n = 24 each). Each group will receive treatment sessions over the course of 4 weeks, twice per week, for eight sessions in total. The primary outcome is the State-Trait Anxiety Inventory (STAI), and the secondary outcomes are the Hwa-byung scale (H-scale), the Center for Epidemiologic Studies Depression Scale (CES-D), the Hwa-byung visual analogue scale (H-VAS) for primary symptoms, the World Health Organization Quality of Life scale, brief version (WHOQOL-BREF), and levels of salivary cortisol. Patients will be asked to complete questionnaires at the baseline visit (visit 2), after the last treatment session (visit 9), and at 4 weeks after the end of all trial sessions (visit 10). From the baseline (visit 2) through the follow-up (visit 10), the entire process will take a total of 53 days. Discussion This proposed study targets patients with Hwa-byung, especially those who have exhibited symptoms of anxiety. Therefore, the primary outcome is set to measure the level of anxiety. OMMT is music therapy combined with traditional Korean medicinal theories. Unlike previously reported music therapies, for which patients simply listen to music passively, in OMMT, patients

  12. Effect of oriental medicine music therapy on patients with Hwa-byung: a study protocol for a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Park Jeong-Su

    2012-09-01

    Full Text Available Abstract Background Hwa-byung, a Korean culture-bound syndrome with both psychological and somatic symptoms, is also known as ‘anger syndrome’. It includes various physical symptoms including anxiety, a feeling of overheating, a sensation of pressure on the chest, heart palpitations, respiratory stuffiness, insomnia, and anxiety. Methods/design The proposed study is a single-center, double-blind, randomized, controlled trial with two parallel arms: an oriental medicine music therapy (OMMT group and a control music therapy (CMT group. In total, 48 patients will be enrolled into the trial. The first visit will be the screening visit. At baseline (visit 2, all participants fulfilling both the inclusion and the exclusion criteria will be split and randomly divided into two equal groups: the OMMT and the CMT (n = 24 each. Each group will receive treatment sessions over the course of 4 weeks, twice per week, for eight sessions in total. The primary outcome is the State-Trait Anxiety Inventory (STAI, and the secondary outcomes are the Hwa-byung scale (H-scale, the Center for Epidemiologic Studies Depression Scale (CES-D, the Hwa-byung visual analogue scale (H-VAS for primary symptoms, the World Health Organization Quality of Life scale, brief version (WHOQOL-BREF, and levels of salivary cortisol. Patients will be asked to complete questionnaires at the baseline visit (visit 2, after the last treatment session (visit 9, and at 4 weeks after the end of all trial sessions (visit 10. From the baseline (visit 2 through the follow-up (visit 10, the entire process will take a total of 53 days. Discussion This proposed study targets patients with Hwa-byung, especially those who have exhibited symptoms of anxiety. Therefore, the primary outcome is set to measure the level of anxiety. OMMT is music therapy combined with traditional Korean medicinal theories. Unlike previously reported music therapies, for which patients simply listen to music passively, in

  13. The Influence of Coping-oriented Hypnotic Suggestions on Chronic Pain in Patients with Spinal Cord Injury (SCI): A Randomized Controlled Study

    DEFF Research Database (Denmark)

    Knudsen, Lone; Kjøgx, Heidi; Kasch, Helge

    Background and aims: Coping-oriented hypnotic suggestions aimed at reducing pain catastrophizing have been shown to reduce pain in people with chronic tension-type headache and experimental pain in healthy volunteers during hypnosis (Kjøgx et al., 2016). However, the effect on pain post-hypnosis...... is unknown. The aim is to investigate the effect of coping-oriented hypnotic suggestions on chronic pain post-hypnosis. Methods: Seventy-five SCI-patients with chronic pain (>3, NRS 0-10) are randomized into one of three conditions; 1) coping-oriented hypnosis plus current treatment, 2) neutral hypnosis plus...... Strategies Questionnaire), pain catastrophizing (Pain Catastrophizing Scale), anxiety and depression (Hospital Anxiety and Depression Scale). Patients’ global impression of change and side effects of the hypnosis are also assessed for 14 days post-intervention. Results: Preliminary results will be presented...

  14. Core stability exercise is as effective as task-oriented motor training in improving motor proficiency in children with developmental coordination disorder: a randomized controlled pilot study.

    Science.gov (United States)

    Au, Mei K; Chan, Wai M; Lee, Lin; Chen, Tracy Mk; Chau, Rosanna Mw; Pang, Marco Yc

    2014-10-01

    To compare the effectiveness of a core stability program with a task-oriented motor training program in improving motor proficiency in children with developmental coordination disorder (DCD). Randomized controlled pilot trial. Outpatient unit in a hospital. Twenty-two children diagnosed with DCD aged 6-9 years were randomly allocated to the core stability program or the task-oriented motor program. Both groups underwent their respective face-to-face training session once per week for eight consecutive weeks. They were also instructed to carry out home exercises on a daily basis during the intervention period. Short Form of the Bruininks-Oseretsky Test of Motor Proficiency (Second Edition) and Sensory Organization Test at pre- and post-intervention. Intention-to-treat analysis revealed no significant between-group difference in the change of motor proficiency standard score (P=0.717), and composite equilibrium score derived from the Sensory Organization Test (P=0.100). Further analysis showed significant improvement in motor proficiency in both the core stability (mean change (SD)=6.3(5.4); p=0.008) and task-oriented training groups (mean change(SD)=5.1(4.0); P=0.007). The composite equilibrium score was significantly increased in the task-oriented training group (mean change (SD)=6.0(5.5); P=0.009), but not in the core stability group (mean change(SD) =0.0(9.6); P=0.812). In the task-oriented training group, compliance with the home program was positively correlated with change in motor proficiency (ρ=0.680, P=0.030) and composite equilibrium score (ρ=0.638, P=0.047). The core stability exercise program is as effective as task-oriented training in improving motor proficiency among children with DCD. © The Author(s) 2014.

  15. Substituting maize grain with barley grain in concentrates fed to ...

    African Journals Online (AJOL)

    The aim of the study was to determine the effect of substituting maize grain with barley grain in the diet of lactating Jersey cows grazing kikuyu-ryegrass pasture. Sixty Jersey cows were blocked in terms of number of days in milk, lactation number, milk yield and live weight and randomly assigned to one of five treatments (n ...

  16. Grain interaction effects in polycrystalline Cu

    DEFF Research Database (Denmark)

    Thorning, C.; Somers, Marcel A.J.; Wert, John A.

    2005-01-01

    Crystal orientation maps for a grain in a deformed Cu polycrystal have been analysed with the goal of understanding the effect of grain interactions on orientation subdivision. The polycrystal was incrementally strained in tension to 5, 8, 15 and 25% extension; a crystal orientation map was measu......Crystal orientation maps for a grain in a deformed Cu polycrystal have been analysed with the goal of understanding the effect of grain interactions on orientation subdivision. The polycrystal was incrementally strained in tension to 5, 8, 15 and 25% extension; a crystal orientation map...... range of Tailor solutions for axisymmetric strain; grain interactions are not required to account for the coarse domain structure. Special orientation domains extend 20-100 µm into the grain at various locations around its periphery. The special orientation domain morphologies include layers along...... boundary segments, lobes that may be further subdivided, and plates. Detailed analysis of the crystal rotations in the special domains provides strong evidence that they result from grain interactions....

  17. Omitted data in randomized controlled trials for anxiety and depression: A systematic review of the inclusion of sexual orientation and gender identity.

    Science.gov (United States)

    Heck, Nicholas C; Mirabito, Lucas A; LeMaire, Kelly; Livingston, Nicholas A; Flentje, Annesa

    2017-01-01

    The current study examined the frequency with which randomized controlled trials (RCTs) of behavioral and psychological interventions for anxiety and depression include data pertaining to participant sexual orientation and nonbinary gender identities. Using systematic review methodology, the databases PubMed and PsycINFO were searched to identify RCTs published in 2004, 2009, and 2014. Random selections of 400 articles per database per year (2,400 articles in total) were considered for inclusion in the review. Articles meeting inclusion criteria were read and coded by the research team to identify whether the trial reported data pertaining to participant sexual orientation and nonbinary gender identities. Additional trial characteristics were also identified and indexed in our database (e.g., sample size, funding source). Of the 232 articles meeting inclusion criteria, only 1 reported participants' sexual orientation, and zero articles included nonbinary gender identities. A total of 52,769 participants were represented in the trials, 93 of which were conducted in the United States, and 43 acknowledged the National Institutes of Health as a source of funding. Despite known mental health disparities on the basis of sexual orientation and nonbinary gender identification, researchers evaluating interventions for anxiety and depression are not reporting on these important demographic characteristics. Reporting practices must change to ensure that our interventions generalize to lesbian, gay, bisexual, and transgender persons. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  18. Effects of task-oriented robot training on arm function, activity, and quality of life in chronic stroke patients: a randomized controlled trial.

    Science.gov (United States)

    Timmermans, Annick A A; Lemmens, Ryanne J M; Monfrance, Maurice; Geers, Richard P J; Bakx, Wilbert; Smeets, Rob J E M; Seelen, Henk A M

    2014-03-31

    Over fifty percent of stroke patients experience chronic arm hand performance problems, compromising independence in daily life activities and quality of life. Task-oriented training may improve arm hand performance after stroke, whereby augmented therapy may lead to a better treatment outcome. Technology-supported training holds opportunities for increasing training intensity. However, the effects of robot-supported task-oriented training with real life objects in stroke patients are not known to date. The aim of the present study was to investigate the effectiveness and added value of the Haptic Master robot combined with task-oriented arm hand training in chronic stroke patients. In a single-blind randomized controlled trial, 22 chronic stroke patients were randomly allocated to receive either task-oriented robot-assisted arm-hand training (experimental group) or task-oriented non-robotic arm-hand training (control group). For training, the T-TOAT (Technology-supported Task-Oriented Arm Training) method was applied. Training was provided during 8 weeks, 4 times/week, 2 × 30 min/day. A significant improvement after training on the Action Research Arm Test (ARAT) was demonstrated in the experimental group (p = 0.008). Results were maintained until 6 months after cessation of the training. On the perceived performance measure (Motor Activity Log (MAL)), both, the experimental and control group improved significantly after training (control group p = 0.008; experimental group p = 0.013). The improvements on MAL in both groups were maintained until 6 months after cessation of the training. With regard to quality of life, only in the control group a significant improvement after training was found (EuroQol-5D p = 0.015, SF-36 physical p = 0.01). However, the improvement on SF-36 in the control group was not maintained (p = 0.012). No between-group differences could be demonstrated on any of the outcome measures. Arm hand performance improved in chronic stroke

  19. Improving the thermoelectric performance of metastable rock-salt GeTe-rich Ge-Sb-Te thin films through tuning of grain orientation and vacancies

    Energy Technology Data Exchange (ETDEWEB)

    Chen, I. Nan [Department of Physics, National Taiwan University, Taipei (China); Institute of Atomic and Molecular Sciences, Academia Sinica, Taipei (China); Chong, Cheong-Wei [Institute of Atomic and Molecular Sciences, Academia Sinica, Taipei (China); Center for Condensed Matter Sciences, National Taiwan University, Taipei (China); Wong, Deniz P.; Lyu, Liang-Ming; Chien, Wei-Lun; Anbalagan, Ramakrishnan; Aminzare, Masoud; Chen, Kuei-Hsien [Institute of Atomic and Molecular Sciences, Academia Sinica, Taipei (China); Chen, Yang-Fang [Department of Physics, National Taiwan University, Taipei (China); Chen, Li-Chyong [Center for Condensed Matter Sciences, National Taiwan University, Taipei (China)

    2016-12-15

    Phase-change memory materials such as the pseudobinary GeTe-Sb{sub 2}Te{sub 3} compounds have recently gained attention for their good thermoelectric properties, which can be used for power-generation/cooling applications. In this work, GeTe-rich Ge-Sb-Te thin films deposited using a radio-frequency magnetron sputtering method readily exhibit the metastable face-centered cubic (FCC) phase at room temperature. This is in stark contrast to its bulk form, which only transforms to its FCC phase after a transition temperature of around 350 C. Based on previous works, the FCC phase contributes to the superior thermoelectric properties of this material system. In this study, by decreasing the working deposition pressure, the preferred orientation of (200) plane is observed that translates to improved carrier mobility. Moreover, increasing the annealing temperature has been shown to decrease the carrier concentration due to Te deficiency, leading to a significant improvement in the Seebeck coefficient of the film. By combining these effects, an optimized thermoelectric power factor (21 μW/cm K{sup 2}) was obtained at an operating temperature of 350 C. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  20. Grain boundaries

    Energy Technology Data Exchange (ETDEWEB)

    Balluffi, R.W.; Bristowe, P.D.

    1991-01-01

    The present document is a progress report describing the work accomplished to date during the second year of our four-year grant (February 15, 1990--February 14, 1994) to study grain boundaries. The research was focused on the following three major efforts: Study of the atomic structure of grain boundaries by means of x-ray diffraction, transmission electron microscopy and computer modeling; study of short-circuit diffusion along grain boundaries; and development of a Thin-film Deposition/Bonding Apparatus for the manufacture of high purity bicrystals.

  1. Grain boundaries

    Science.gov (United States)

    Balluffi, R. W.; Bristowe, P. D.

    The present document is a progress report describing the work accomplished to date during the second year of our four-year grant (February 15, 1990 to February 14, 1994) to study grain boundaries. The research was focused on the following three major efforts: study of the atomic structure of grain boundaries by means of x-ray diffraction, transmission electron microscopy and computer modeling; study of short-circuit diffusion along grain boundaries; and development of a Thin-film Deposition/Bonding Apparatus for the manufacture of high purity bicrystals.

  2. Economic evaluation of schema therapy and clarification-oriented psychotherapy for personality disorders: A multicenter, randomized controlled trial

    NARCIS (Netherlands)

    Bamelis, L.L.M.; Arntz, A.; Wetzelaer, P.; Verdoorn, R.; Evers, S.M.A.A.

    2015-01-01

    Purpose: To compare from a societal perspective the cost-effectiveness and cost-utility of schema therapy, clarification-oriented psychotherapy, and treatment as usual for patients with avoidant, dependent, obsessive-compulsive, paranoid, histrionic, and/or narcissistic personality disorder. Method:

  3. Ferroelectric domain continuity over grain boundaries

    DEFF Research Database (Denmark)

    Mantri, Sukriti; Oddershede, Jette; Damjanovic, Dragan

    2017-01-01

    Formation and mobility of domain walls in ferroelectric materials is responsible for many of their electrical and mechanical properties. Domain wall continuity across grain boundaries has been observed since the 1950's and is speculated to affect the grain boundary-domain interactions, thereby...... orientation. We have also incorporated the effect of grain boundary ferroelectric polarization charge created when any two domains meet at the grain boundary plane. The probability of domain wall continuity for three specific grain misorientations is studied. Use of this knowledge to optimize processing...

  4. Observations of orientation dependence of surface morphology in tungsten implanted by low energy and high flux D plasma

    DEFF Research Database (Denmark)

    Xu, H.Y.; Zhang, Yubin; Yuan, Y.

    2013-01-01

    〉 to the least in grains oriented close to 〈0 0 1〉. Three kinds of typical nanostructures were observed, with a clear dependence on grain orientation. Triangular structures were observed on grains oriented near the 〈1 1 1〉 corner of the inverse pole figure, with lamellar structures formed for grains oriented...

  5. 3D radiative transfer code for polarized scattered light with aligned grains

    Science.gov (United States)

    Pelkonen, V.-M.; Penttilä, A.; Juvela, M.; Muinonen, K.

    2017-09-01

    We are working on a 3D Monte Carlo radiative transfer code which incorporates hierarchical grid structure (octree) and the full Stokes vector for both the incoming radiation and the radiation scattered by dust grains. The dust model can include different populations of dust, differing in composition, size distribution, shapes, and orientation. The non-spherical dust grains can be randomly aligned, or a fraction of them can be aligned with the magnetic fields (in particular, by the radiation field via radiative torques, RATs). The code will be a valuable tool in studying polarized scattered light from cometary comae in the solar system and from protoplanetary disks in the exoplanetary context.

  6. Effects of unfermented and fermented whole grain rye crisp breads served as part of a standardized breakfast, on appetite and postprandial glucose and insulin responses: a randomized cross-over trial.

    Science.gov (United States)

    Johansson, Daniel P; Lee, Isabella; Risérus, Ulf; Langton, Maud; Landberg, Rikard

    2015-01-01

    Whole grain rye products have been shown to increase satiety and elicit lower postprandial insulin response without a corresponding change in glucose response compared with soft refined wheat bread. The underlying mechanisms for these effects have not been fully determined The primary aim of the study was to investigate if whole grain rye crisp bread compared to refined wheat crisp bread, elected beneficial effects on appetite and postprandial insulin response, similarly as for other rye products. In a randomized cross-over trial, 23 healthy volunteers, aged 27-70 years, BMI 18-31.4 kg/m2, were served a standardized breakfast with unfermented whole grain rye crisp bread (uRCB), fermented whole grain rye crisp bread (RCB) or refined wheat crisp bread (WCB), Appetite was measured using a visual analogue scale (VAS) until 4 h after breakfast. Postprandial glucose and insulin were measured at 0-230 min. Breads were chemically characterized including macronutrients, energy, dietary fiber components, and amino acid composition, and microstructure was characterized with light microscopy. Reported fullness was 16% higher (Pcrisp bread induces higher satiety and lower insulin response compared with refined wheat crisp bread. Microstructural characteristics, dietary fiber content and composition are probable contributors to the increased satiety after ingestion of rye crisp breads. Higher insulin secretion after ingestion of RCB and WCB compared with uRCB may be due to differences in fiber content and composition, and higher availability of insulinogenic branched chain amino acids. ClinicalTrials.gov NCT02011217.

  7. Grain boundaries. Progress report, February 15, 1990--October 15, 1990

    Energy Technology Data Exchange (ETDEWEB)

    Balluffi, R.W.; Bristowe, P.D.

    1990-12-31

    The following are reported: structural studies (dislocation structure of Ni/Ag interphase boundary, structural complexity in grain boundaries with covalent bonding, relation between microscopic properties of two semiconducting grain boundaries and their orientations, diffraction effects due to double positioning in (111) Au bicrystals, sensitivity of diffraction profiles to grain boundary segregation, solute segregation at grain boundaries in Au, 4-body interatomic potential for Si for defect calculations); boundary migration studies (molecular dynamics study of grain boundary migration without participation of grain boundary dislocations); study of short-circuit diffusion along grain boundaries and its dependence on boundary structure; and thin-film deposition/bonding apparatus for manufacturing high-purity bicrystals.

  8. A Randomized Trial to Measure the Efficacy of Applying Task Oriented Role Assignment to Improve Neonatal Resuscitation

    Science.gov (United States)

    2017-05-06

    DEPARTMENT OF THE AIR FORCE 59TH MEDICAL W ING (AETC) JOINT BASE SAN ANTONIO - LACKLAND TEXAS MEMORANOUMFORSGVT ATTN: MAJ CARRIE LITKE-WAGER...Author Litke· Wager, Carrie 0-4/Major 959/CSPS/ 59MDW/SGVT b. Mu, Thornton 0-5/LTC MCH E-ZDP-N SA MMC c. Delaney, Heather 0-4/ MAJ MCHE-ZDP-N SA MMC d...78234-2715 15 June 2016 Maj Carrie Litke-Wager, MD Brooke Army Medical Center Institutional Review Board A Randomized Trial to Measure the

  9. Behaviors of Deformation, Recrystallization and Textures Evolution of Columnar Grains in 3%Si Electrical Steel Slabs

    Directory of Open Access Journals (Sweden)

    SHAO Yuan-yuan

    2017-11-01

    Full Text Available The behaviors of deformation and recrystallization and textures evolution of 3% (mass fraction Si columnar-grained electrical steel slabs were investigated by electron backscatter diffractometer technique and X-ray diffraction. The results indicate that the three columnar-grained samples have different initial textures with the long axes arranged along rolling, transverse and normal directions. Three shear orientations can be obtained in surface layer after hot rolling, of which Goss orientation is formed easily. The α and γ fibre rolling orientations are obtained in RD sample, while strong γ fibre orientations in TD sample and sharp {100} orientations in ND sample are developed respectively. In addition, cube orientation can be found in all the three samples. The characteristics of hot rolled orientations in center region reveal distinct dependence on initial columnar-grained orientations. Strong {111}〈112〉 orientation in RD and TD samples separately comes from Goss orientation of hot rolled sheets, and sharp rotated cube orientation in ND sample originates from the initial {100} orientation of hot rolled sheets after cold rolling. Influenced by initial deviated orientations and coarse grain size, large orientation gradient of rotated cube oriented grain can be observed in ND sample. The coarse {100} orientated grains of center region in the annealed sheets show the heredity of the initial columnar-grained orientations.

  10. Performance of inverted polymer solar cells with randomly oriented ZnO nanorods coupled with atomic layer deposited ZnO

    Energy Technology Data Exchange (ETDEWEB)

    Zafar, Muhammad [School of Chemical Engineering, Chonnam National University, 300 Youngbong-dong, Gwangju 500-757 (Korea, Republic of); Yun, Ju-Young [Center for Vacuum, Korea Research Institute of Standards and Science, 267 Gajeong-ro, Daejeon 305-600 (Korea, Republic of); Kim, Do-Heyoung, E-mail: kdhh@chonnam.ac.kr [School of Chemical Engineering, Chonnam National University, 300 Youngbong-dong, Gwangju 500-757 (Korea, Republic of)

    2017-03-15

    Highlights: • Hydrothermally grown, randomly oriented, and low areal density ZnO nanorods have been successfully adopted as the electron transport layer in inverted organic solar cells. • The addition of atomic layer deposited ZnO on the ZnO nanorods effectively enhance the photovoltaic performances of inverted organic solar cells. • The inverted organic solar cells with 5 nm thick-ALD ZnO showed the highest power conversion efficiency of 3.08%, which is an enhancement of approximately 80% compared to the cells without the ALD ZnO layer (PCE = 1.67%). - Abstract: Nanostructuring of the electron transport layer (ETL) in organic photovoltaic cells (OPV) is of great interest because it increases the surface area of the cell and electron transport. In this work, hydrothermally grown, randomly oriented, and low areal density ZnO nanorods (NRs) have been adopted as the ETL, and the effect of adding atomic layer deposited (ALD) ZnO on the ZnO NRs on the inverted organic solar cell performance has been investigated. The fabricated inverted organic solar cell with 5-nm-thick ALD-ZnO grown on the ZnO NRs showed the highest power conversion efficiency (PCE) of 3.08%, which is an enhancement of 85% from that of the cell without ALD-ZnO (PCE = 1.67%). The ultrathin ALD-ZnO was found to act as a curing layer of the surface defects on the hydrothermally grown ZnO NRs, resulting in an improvement in photovoltaic performance.

  11. Algorithm for Reconstruction of 3D Images of Nanorice Particles from Diffraction Patterns of Two Particles in Independent Random Orientations with an X-ray Laser

    Directory of Open Access Journals (Sweden)

    Sung Soon Kim

    2017-06-01

    Full Text Available The method of angular correlations recovers quantities from diffraction patterns of randomly oriented particles, as expected to be measured with an X-ray free electron laser (XFEL, proportional to quadratic functions of the spherical harmonic expansion coefficients of the diffraction volume of a single particle. We have previously shown that it is possible to reconstruct a randomly oriented icosahedral or helical virus from the average over all measured diffraction patterns of such correlations. We point out in this paper that a structure of even simpler particles of 50 Å or so in diameter and consisting of heavier atomic elements (to enhance scattering that has been used as a test case for reconstructions from XFEL diffraction patterns can also be solved by this technique. Even though there has been earlier work on similar objects (prolate spheroids, one advantage of the present technique is its potential to also work with diffraction patterns not only due to single particles as has been suggested on the basis on nonoverlapping delta functions of angular scattering. Accordingly, we calculated from the diffraction patterns the angular momentum expansions of the pair correlations and triple correlations for general particle images and reconstructed those images in the standard way. Although the images looked pretty much the same, it is not totally clear to us that the angular correlations are exactly the same as different numbers of particles due to the possibility of constructive or destructive interference between the scattered waves from different particles. It is of course known that, for a large number of particles contributing to a diffraction parttern, the correlations converge to that of a single particle. It could be that the lack of perfect agreement between the images reconstructed with one and two particles is due to uncancelling constructive and destructive conditions that are not found in the case of solution scattering.

  12. Efficacy of a Peer-Led, Recovery-Oriented Shared Decision-Making System: A Pilot Randomized Controlled Trial.

    Science.gov (United States)

    Yamaguchi, Sosei; Taneda, Ayano; Matsunaga, Asami; Sasaki, Natsuki; Mizuno, Masashi; Sawada, Yumiko; Sakata, Masuhiro; Fukui, Satoe; Hisanaga, Fumie; Bernick, Peter; Ito, Junichiro

    2017-12-01

    The effects of a comprehensive shared decision-making system based on the CommonGround approach and incorporating peer support and a computerized decision aid were investigated. A pilot randomized controlled trial with six-month follow-up was conducted in Japan. Fifty-six outpatients with mental illness were randomly allocated to a shared decision-making system (intervention) group or treatment as usual (control) group. The implementation process and several outcomes were compared between groups. The core components and processes of shared decision making were observed in the intervention group more frequently than in the control group. The intervention group also reported a significantly more positive participants' view of the relationship with their doctor than the control group. The intervention did not have a significant effect on most clinical and recovery-related outcomes. The shared decision-making system appeared to partly improve patients' perceptions of communication and relationships with doctors but did not have a significant effect on other patient-level outcomes.

  13. Grain boundary character distribution in a hot rolled 316 L stainless steel; Distribuicao de tipos de contornos de grao em um aco inoxidavel 316L laminado a quente

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, L.C.R. [Rio Grande do Sul Univ., Porto Alegre, RS (Brazil). Dept. de Metalurgia; Thomson, C.B. [Wales Univ., Swansea (United Kingdom)

    1995-12-31

    The texture and the grain boundary character distribution of a 316 L stainless steel under hot rolled condition have been studied. Electron back-scatter diffraction technique associated to the scanning electron microscopy is used to determine the crystallographic orientation of grains individually. The material presented a random texture. However, the misorientation axis distribution represented by an inverse pole figure showed a non-random distribution with a high proportion <111> misorientation axis. The disorientation angle distribution indicates a proportion of about 60% of boundaries with 60 deg C misorientation angle. A 25% proportion of CSL interfaces of {Sigma} = 3 type was found 17 refs., 9 figs., 2 tabs.

  14. The PULSAR Specialist Care protocol: a stepped-wedge cluster randomized control trial of a training intervention for community mental health teams in recovery-oriented practice.

    Science.gov (United States)

    Shawyer, Frances; Enticott, Joanne C; Brophy, Lisa; Bruxner, Annie; Fossey, Ellie; Inder, Brett; Julian, John; Kakuma, Ritsuko; Weller, Penelope; Wilson-Evered, Elisabeth; Edan, Vrinda; Slade, Mike; Meadows, Graham N

    2017-05-08

    Recovery features strongly in Australian mental health policy; however, evidence is limited for the efficacy of recovery-oriented practice at the service level. This paper describes the Principles Unite Local Services Assisting Recovery (PULSAR) Specialist Care trial protocol for a recovery-oriented practice training intervention delivered to specialist mental health services staff. The primary aim is to evaluate whether adult consumers accessing services where staff have received the intervention report superior recovery outcomes compared to adult consumers accessing services where staff have not yet received the intervention. A qualitative sub-study aims to examine staff and consumer views on implementing recovery-oriented practice. A process evaluation sub-study aims to articulate important explanatory variables affecting the interventions rollout and outcomes. The mixed methods design incorporates a two-step stepped-wedge cluster randomized controlled trial (cRCT) examining cross-sectional data from three phases, and nested qualitative and process evaluation sub-studies. Participating specialist mental health care services in Melbourne, Victoria are divided into 14 clusters with half randomly allocated to receive the staff training in year one and half in year two. Research participants are consumers aged 18-75 years who attended the cluster within a previous three-month period either at baseline, 12 (step 1) or 24 months (step 2). In the two nested sub-studies, participation extends to cluster staff. The primary outcome is the Questionnaire about the Process of Recovery collected from 756 consumers (252 each at baseline, step 1, step 2). Secondary and other outcomes measuring well-being, service satisfaction and health economic impact are collected from a subset of 252 consumers (63 at baseline; 126 at step 1; 63 at step 2) via interviews. Interview-based longitudinal data are also collected 12 months apart from 88 consumers with a psychotic disorder

  15. Control and Characterization of Individual Grains and Grain Boundaries in Graphene Grown by Chemical Vapour Deposition

    Science.gov (United States)

    2011-06-01

    field (B). Figure 5c presents low temperature (4.3 K) magnetoresistance (Rxx(B)) measurements across the grain boundary compared to Rxx(B) measured within...voltage leads labelled in the legend. c, Four-terminal magnetoresistance (Rxx) measured at 4.3 K within each graphene grain and across the grain boundary...graphene nanoribbons. Nature 444, 347–349 (2006). 37. Huang, M. Y. et al. Phonon softening and crystallographic orientation of strained graphene studied by

  16. Improvements in Orientation and Balancing Abilities in Response to One Month of Intensive Slackline-Training. A Randomized Controlled Feasibility Study.

    Science.gov (United States)

    Dordevic, Milos; Hökelmann, Anita; Müller, Patrick; Rehfeld, Kathrin; Müller, Notger G

    2017-01-01

    Background: Slackline-training has been shown to improve mainly task-specific balancing skills. Non-task specific effects were assessed for tandem stance and preferred one-leg stance on stable and perturbed force platforms with open eyes. It is unclear whether transfer effects exist for other balancing conditions and which component of the balancing ability is affected. Also, it is not known whether slackline-training can improve non-visual-dependent spatial orientation abilities, a function mainly supported by the hippocampus. Objective: To assess the effect of one-month of slackline-training on different components of balancing ability and its transfer effects on non-visual-dependent spatial orientation abilities. Materials and Methods: Fifty subjects aged 18-30 were randomly assigned to the training group (T) (n = 25, 23.2 ± 2.5 years; 12 females) and the control group (C) (n = 25, 24.4 ± 2.8 years; 11 females). Professional instructors taught the intervention group to slackline over four consecutive weeks with three 60-min-trainings in each week. Data acquisition was performed (within 2 days) by blinded investigators at the baseline and after the training. Main outcomes Improvement in the score of a 30-item clinical balance test (CBT) developed at our institute (max. score = 90 points) and in the average error distance (in centimeters) in an orientation test (OT), a triangle completion task with walking and wheelchair conditions for 60°, 90°, and 120°. Results: Training group performed significantly better on the closed-eyes conditions of the CBT (1.6 points, 95% CI: 0.6 to 2.6 points vs. 0.1 points, 95% CI: -1 to 1.1 points; p = 0.011, [Formula: see text] = 0.128) and in the wheelchair (vestibular) condition of the OT (21 cm, 95% CI: 8-34 cm vs. 1 cm, 95% CI: -14-16 cm; p = 0.049, [Formula: see text] = 0.013). Conclusion: Our results indicate that one month of intensive slackline training is a novel approach for enhancing clinically relevant balancing

  17. Comparison of Cognitive Orientation to daily Occupational Performance and conventional occupational therapy on occupational performance in individuals with stroke: A randomized controlled trial.

    Science.gov (United States)

    Ahn, Si-Nae; Yoo, Eun-Young; Jung, Min-Ye; Park, Hae-Yean; Lee, Ji-Yeon; Choi, Yoo-Im

    2017-01-01

    Cognitive Orientation to daily Occupational Performance (CO-OP) approach based on cognitive strategy in occupational therapy. To investigate the effects of CO-OP approach on occupational performance in individuals with hemiparetic stroke. This study was designed as a 5-week, randomized, single-blind. Forty-three participants who had a diagnosis of first stroke were enrolled in this study. The participants were randomly assigned to the experimental group (n = 20) or the control group (n = 23). The experimental group conducted CO-OP approach while the control group conducted conventional occupational therapy based on occupational performance components. This study measured Canadian Occupational Performance Measure (COPM) and Performance Quality Rating Scale (PQRS). Outcome measurements were performed at baseline and post-intervention. After training, the scores of COPM and PQRS in trained task were significantly higher for the score in the experimental group than the control group. In addition, the non-trained task was significantly higher for the score in the experimental group than the control group in COPM and the PQRS. This study suggests that the CO-OP approach is beneficial effects on the occupational performance to improvement in individuals with hemiparetic stroke, and have positive effects on generalization and transfer of acquired skills.

  18. Effects of motive-oriented therapeutic relationship in early-phase treatment of borderline personality disorder: a pilot study of a randomized trial.

    Science.gov (United States)

    Kramer, Ueli; Berger, Thomas; Kolly, Stéphane; Marquet, Pierre; Preisig, Martin; de Roten, Yves; Despland, Jean-Nicolas; Caspar, Franz

    2011-04-01

    Motive-oriented therapeutic relationship (MOTR, also called complementary therapeutic relationship) was postulated to be a particularly helpful therapeutic ingredient in the early-phase treatment of patients with personality disorders, in particular borderline personality disorder (BPD). The present pilot study of randomized controlled trial using an add-on design aims to investigate the effects of MOTR in early-phase treatment (up to session 10), with BPD patients on therapeutic alliance, session impact, and outcome. In total, N = 25 patients participated in the study. BPD patients were randomly allocated to a manual-based investigation process in 10 sessions or to the same investigation process infused with MOTR. Adherence ratings were performed and yielded satisfactory results. The results suggested a specific effectiveness of MOTR on the interpersonal problem area, on the quality of the therapeutic alliance and the quality of the therapeutic relationship, as rated by the patient. These results may have important clinical implications for the early-phase treatment of patients presenting with BPD.

  19. Effects of motive-oriented therapeutic relationship in a ten-session general psychiatric treatment of borderline personality disorder: a randomized controlled trial.

    Science.gov (United States)

    Kramer, Ueli; Kolly, Stéphane; Berthoud, Laurent; Keller, Sabine; Preisig, Martin; Caspar, Franz; Berger, Thomas; de Roten, Yves; Marquet, Pierre; Despland, Jean-Nicolas

    2014-01-01

    Motive-oriented therapeutic relationship (MOTR) was postulated to be a particularly helpful therapeutic ingredient in the early treatment phase of patients with personality disorders, in particular with borderline personality disorder (BPD). The present randomized controlled study using an add-on design is the first study to test this assumption in a 10-session general psychiatric treatment with patients presenting with BPD on symptom reduction and therapeutic alliance. A total of 85 patients were randomized. They were either allocated to a manual-based short variant of the general psychiatric management (GPM) treatment (in 10 sessions) or to the same treatment where MOTR was deliberately added to the treatment. Treatment attrition and integrity analyses yielded satisfactory results. The results of the intent-to-treat analyses suggested a global efficacy of MOTR, in the sense of an additional reduction of general problems, i.e. symptoms, interpersonal and social problems (F1, 73 = 7.25, p < 0.05). However, they also showed that MOTR did not yield an additional reduction of specific borderline symptoms. It was also shown that a stronger therapeutic alliance, as assessed by the therapist, developed in MOTR treatments compared to GPM (Z55 = 0.99, p < 0.04). These results suggest that adding MOTR to psychiatric and psychotherapeutic treatments of BPD is promising. Moreover, the findings shed additional light on the perspective of shortening treatments for patients presenting with BPD. © 2014 S. Karger AG, Basel.

  20. Mindfulness-Oriented Recovery Enhancement versus CBT for co-occurring substance dependence, traumatic stress, and psychiatric disorders: Proximal outcomes from a pragmatic randomized trial.

    Science.gov (United States)

    Garland, Eric L; Roberts-Lewis, Amelia; Tronnier, Christine D; Graves, Rebecca; Kelley, Karen

    2016-02-01

    In many clinical settings, there is a high comorbidity between substance use disorders, psychiatric disorders, and traumatic stress. Novel therapies are needed to address these co-occurring issues efficiently. The aim of the present study was to conduct a pragmatic randomized controlled trial comparing Mindfulness-Oriented Recovery Enhancement (MORE) to group Cognitive-Behavioral Therapy (CBT) and treatment-as-usual (TAU) for previously homeless men residing in a therapeutic community. Men with co-occurring substance use and psychiatric disorders, as well as extensive trauma histories, were randomly assigned to 10 weeks of group treatment with MORE (n = 64), CBT (n = 64), or TAU (n = 52). Study findings indicated that from pre-to post-treatment MORE was associated with modest yet significantly greater improvements in substance craving, post-traumatic stress, and negative affect than CBT, and greater improvements in post-traumatic stress and positive affect than TAU. A significant indirect effect of MORE on decreasing craving and post-traumatic stress by increasing dispositional mindfulness was observed, suggesting that MORE may target these issues via enhancing mindful awareness in everyday life. This pragmatic trial represents the first head-to-head comparison of MORE against an empirically-supported treatment for co-occurring disorders. Results suggest that MORE, as an integrative therapy designed to bolster self-regulatory capacity, may hold promise as a treatment for intersecting clinical conditions. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. Elastic wave propagation study in copper poly-grain sample using FEM

    Directory of Open Access Journals (Sweden)

    Sudhakar Matle

    2017-01-01

    Full Text Available The paper presents Voronoi based micro-structure modeling through elastic wave propagation in a poly-crystalline copper using finite element method. The micro-structural parameters studied here are; the grain size and the grain orientation. The poly-crystalline copper is modeled as a randomly oriented Voronoi cells in a fixed 2D computational domain. Tone burst 3-cycle pulse of 1 MHz frequency is used as the line source or point source for testing. Welded contact conditions are used at the interface boundaries of any two mutual cells of the domain. It is reported that wave scattering independent of the shape when the size of the scatterer less than the wavelength. Also, It is concluded that transmission efficiency increases as the cell size decreases.

  2. Feeling Thanks and Saying Thanks: A Randomized Controlled Trial Examining If and How Socially Oriented Gratitude Journals Work.

    Science.gov (United States)

    O'Connell, Brenda H; O'Shea, Deirdre; Gallagher, Stephen

    2017-10-01

    This study examined the effect of a reflective interpersonal gratitude journal, a reflective-behavioral interpersonal gratitude journal and an active control journal, on primary qualities of well-being and depression. Participants (n = 192; 67.2% female) completed this 3-month longitudinal randomized controlled design. Participants in the reflective-behavioral condition experienced the greatest improvements in affect balance and reductions in depression at immediate posttest. Both gratitude interventions improved affect balance at 1 month, compared to the control. Changes in affect balance for those in the reflective-behavioral condition were mediated by the rate at which people expressed gratitude in their existing relationships. This effect was moderated by participant's baseline depressive status. Expressing felt gratitude to others appears to be a crucial step in deriving benefits, and these benefits may not be limited to the emotionally healthy. Given the applied popularity of gratitude interventions, understanding not only if but also how they work is essential. © 2017 Wiley Periodicals, Inc.

  3. Grain Boundary Energies in Copper.

    Science.gov (United States)

    Omar, Ramli

    Available from UMI in association with The British Library. Requires signed TDF. The dependence of grain boundary energy on boundary orientation was studied in copper annealed at 1000 ^circC. Grain boundary orientations and the disorientations across the boundaries were measured. A rotation matrix notation is used to interpret selected area electron channelling patterns observed in a scanning electron microscope. The Herring and Shewmon torque terms were investigated using wire specimens having a "bamboo" structure. The Herring torque terms were determined using the Hess relation. The (110) section of the Sigma 11 gamma-plot (i.e. the variation of grain boundary energy with boundary orientation) was evaluated. In this plot, minima in energies were found at the (311) and (332) mirror planes. Sigma 3 and Sigma9 boundaries were investigated in sheet specimens. The (110) and (111) sections of the Sigma3 gamma -plot were evaluated. In addition to the sharp cusps occurring at the Sigma3 {111} planes, the further shallower cusps occur at the incoherent Sigma 3 boundaries with the interfacial planes approximately parallel to {322} in one crystal and {11.44} in the other crystal. Flat and curved Sigma9 boundaries were investigated. The break up of Sigma9 boundaries into two Sigma3 boundaries and the relation between the Sigma3 and Sigma 9 gamma-plots was also examined. The (110) section of the Sigma9 gamma-plot was constructed.

  4. Effects of unfermented and fermented whole grain rye crisp breads served as part of a standardized breakfast, on appetite and postprandial glucose and insulin responses: a randomized cross-over trial.

    Directory of Open Access Journals (Sweden)

    Daniel P Johansson

    Full Text Available Whole grain rye products have been shown to increase satiety and elicit lower postprandial insulin response without a corresponding change in glucose response compared with soft refined wheat bread. The underlying mechanisms for these effects have not been fully determined The primary aim of the study was to investigate if whole grain rye crisp bread compared to refined wheat crisp bread, elected beneficial effects on appetite and postprandial insulin response, similarly as for other rye products.In a randomized cross-over trial, 23 healthy volunteers, aged 27-70 years, BMI 18-31.4 kg/m2, were served a standardized breakfast with unfermented whole grain rye crisp bread (uRCB, fermented whole grain rye crisp bread (RCB or refined wheat crisp bread (WCB, Appetite was measured using a visual analogue scale (VAS until 4 h after breakfast. Postprandial glucose and insulin were measured at 0-230 min. Breads were chemically characterized including macronutrients, energy, dietary fiber components, and amino acid composition, and microstructure was characterized with light microscopy.Reported fullness was 16% higher (P<0.001, and hunger 11% and 12% lower (P<0.05 after ingestion of uRCB and RCB, respectively, compared with WCB. Postprandial glucose response did not differ significantly between treatments. Postprandial insulin was 10% lower (P<0.007 between 0-120 min but not significantly lower between 0-230 min for RCB compared with WCB. uRCB induced 13% (P<0.002 and 17% (P<0.001 lower postprandial insulin response between 0-230 min compared with RCB and WCB respectively.Whole grain rye crisp bread induces higher satiety and lower insulin response compared with refined wheat crisp bread. Microstructural characteristics, dietary fiber content and composition are probable contributors to the increased satiety after ingestion of rye crisp breads. Higher insulin secretion after ingestion of RCB and WCB compared with uRCB may be due to differences in fiber

  5. Mobile Augmented Reality as a Feature for Self-Oriented, Blended Learning in Medicine: Randomized Controlled Trial

    Science.gov (United States)

    2017-01-01

    Background Advantages of mobile Augmented Reality (mAR) application-based learning versus textbook-based learning were already shown in a previous study. However, it was unclear whether the augmented reality (AR) component was responsible for the success of the self-developed app or whether this was attributable to the novelty of using mobile technology for learning. Objective The study’s aim was to test the hypothesis whether there is no difference in learning success between learners who employed the mobile AR component and those who learned without it to determine possible effects of mAR. Also, we were interested in potential emotional effects of using this technology. Methods Forty-four medical students (male: 25, female: 19, mean age: 22.25 years, standard deviation [SD]: 3.33 years) participated in this study. Baseline emotional status was evaluated using the Profile of Mood States (POMS) questionnaire. Dermatological knowledge was ascertained using a single choice (SC) test (10 questions). The students were randomly assigned to learn 45 min with either a mobile learning method with mAR (group A) or without AR (group B). Afterwards, both groups were again asked to complete the previous questionnaires. AttrakDiff 2 questionnaires were used to evaluate the perceived usability as well as pragmatic and hedonic qualities. For capturing longer term effects, after 14 days, all participants were again asked to complete the SC questionnaire. All evaluations were anonymous, and descriptive statistics were calculated. For hypothesis testing, an unpaired signed-rank test was applied. Results For the SC tests, there were only minor differences, with both groups gaining knowledge (average improvement group A: 3.59 [SD 1.48]; group B: 3.86 [SD 1.51]). Differences between both groups were statistically insignificant (exact Mann Whitney U, U=173.5; P=.10; r=.247). However, in the follow-up SC test after 14 days, group A had retained more knowledge (average decrease of the

  6. Mobile Augmented Reality as a Feature for Self-Oriented, Blended Learning in Medicine: Randomized Controlled Trial.

    Science.gov (United States)

    Noll, Christoph; von Jan, Ute; Raap, Ulrike; Albrecht, Urs-Vito

    2017-09-14

    Advantages of mobile Augmented Reality (mAR) application-based learning versus textbook-based learning were already shown in a previous study. However, it was unclear whether the augmented reality (AR) component was responsible for the success of the self-developed app or whether this was attributable to the novelty of using mobile technology for learning. The study's aim was to test the hypothesis whether there is no difference in learning success between learners who employed the mobile AR component and those who learned without it to determine possible effects of mAR. Also, we were interested in potential emotional effects of using this technology. Forty-four medical students (male: 25, female: 19, mean age: 22.25 years, standard deviation [SD]: 3.33 years) participated in this study. Baseline emotional status was evaluated using the Profile of Mood States (POMS) questionnaire. Dermatological knowledge was ascertained using a single choice (SC) test (10 questions). The students were randomly assigned to learn 45 min with either a mobile learning method with mAR (group A) or without AR (group B). Afterwards, both groups were again asked to complete the previous questionnaires. AttrakDiff 2 questionnaires were used to evaluate the perceived usability as well as pragmatic and hedonic qualities. For capturing longer term effects, after 14 days, all participants were again asked to complete the SC questionnaire. All evaluations were anonymous, and descriptive statistics were calculated. For hypothesis testing, an unpaired signed-rank test was applied. For the SC tests, there were only minor differences, with both groups gaining knowledge (average improvement group A: 3.59 [SD 1.48]; group B: 3.86 [SD 1.51]). Differences between both groups were statistically insignificant (exact Mann Whitney U, U=173.5; P=.10; r=.247). However, in the follow-up SC test after 14 days, group A had retained more knowledge (average decrease of the number of correct answers group A: 0

  7. Effect of Transplanting Times on Rate and Duration of Grain Filling, Final Grain Weight and Grain Yield of Rice Cultivars

    Directory of Open Access Journals (Sweden)

    A. Vahdati-Rad

    2016-05-01

    Full Text Available In order to investigate the effects of temperature and radiation on rate and duration of grain filling and final grain weight in rice cultivars, a split plot experiment based on randomized complete block design with three replications was conducted at different transplanting times at the research field of University of Guilan, Rasht, Iran in 2013. Factors were: transplanting dates in main plots (5 May, 20 May and 5 June and rice cultivars (Hashemi, Ali Kazemi, Sangejo, Khazar, Dorfak and Gouhar in sub plots. The greatest grain weight (31.9 mg was obtained in Gouhar at 20 May and the smallest grain weight (20.4 mg was observed in Sangejo at 5 June transplanting dates. The longest effective filling period (32.9 days was achieved in Gouhar at 5 May transplanting date and the shortest grain filling duration (13.9 days was obtained in Hashemi. The greatest grain filling rate (1.62 mg day-1 was obtained in the Hashemi and the smallest rate (0.92 mg day-1 was observed in Gouhar. Significant correlations were observed between cumulative temperature and radiation with final grain weight (R = 0.689. There were significant and positive correlations between the cumulative temperature and irradiance with grain filling duration, in contrary to negative correlations with grain filling rate and grain filling period. The results of this experiment showed that the grain filling duration plays a greater role, than grain filling rate, in determination of the grain weight. It could be concluded that an early transplanting (5 May brings about favorable temperature and radiation conditions for an appropriate grain filling period and a greater final grain weight.

  8. Impairment-oriented training or Bobath therapy for severe arm paresis after stroke: a single-blind, multicentre randomized controlled trial.

    Science.gov (United States)

    Platz, T; Eickhof, C; van Kaick, S; Engel, U; Pinkowski, C; Kalok, S; Pause, M

    2005-10-01

    To study the effects of augmented exercise therapy time for arm rehabilitation as either Bobath therapy or the impairment-oriented training (Arm BASIS training) in stroke patients with arm severe paresis. Single blind, multicentre randomized control trial. Three inpatient neurorehabilitation centres. Sixty-two anterior circulation ischaemic stroke patients. Random assignment to three group: (A) no augmented exercise therapy time, (B) augmented exercise therapy time as Bobath therapy and (C) augmented exercise therapy time as Arm BASIS training. Fugl-Meyer arm motor score. Secondary measure: Action Research Arm Test (ARA). Ancillary measures: Fugl-Meyer arm sensation and joint motion/pain scores and the Ashworth Scale (elbow flexors). An overall effect of augmented exercise therapy time on Fugl-Meyer scores after four weeks was not corroborated (mean and 95% confidence interval (CI) of change scores: no augmented exercise therapy time (n=20) 8.8, 5.2-12.3; augmented exercise therapy time (n=40) 9.9, 6.8-13.9; p = 0.2657). The group who received the augmented exercise therapy time as Arm BASIS training (n=20) had, however, higher gains than the group receiving the augmented exercise therapy time as Bobath therapy (n=20) (mean and 95% CI of change scores: Bobath 7.2, 2.6-11.8; BASIS 12.6, 8.4-16.8; p = 0.0432). Passive joint motion/pain deteriorated less in the group who received BASIS training (mean and 95% CI of change scores: Bobath -3.2, -5.2 to -1.1; BASIS 0.1, -1.8-2.0; p = 0.0090). ARA, Fugl-Meyer arm sensation, and Ashworth Scale scores were not differentially affected. The augmented exercise therapy time as Arm BASIS training enhanced selective motor control. Type of training was more relevant for recovery of motor control than therapeutic time spent.

  9. Stochastic rocket dynamics under random nozzle side loads: Ornstein-Uhlenbeck boundary layer separation and its coarse grained connection to side loading and rocket response

    CERN Document Server

    Keanini, R G; Tkacik, Peter T; Weggel, David C; Knight, P Douglas

    2011-01-01

    A long-standing, though ill-understood problem in rocket dynamics, rocket response to random, altitude-dependent nozzle side-loads, is investigated. Side loads arise during low altitude flight due to random, asymmetric, shock-induced separation of in-nozzle boundary layers. In this paper, stochastic evolution of the in-nozzle boundary layer separation line, an essential feature underlying side load generation, is connected to random, altitude-dependent rotational and translational rocket response via a set of simple analytical models. Separation line motion, extant on a fast boundary layer time scale, is modeled as an Ornstein-Uhlenbeck process. Pitch and yaw responses, taking place on a long, rocket dynamics time scale, are shown to likewise evolve as OU processes. Stochastic, altitude-dependent rocket translational motion follows from linear, asymptotic versions of the full nonlinear equations of motion; the model is valid in the practical limit where random pitch, yaw, and roll rates all remain small. Comp...

  10. Performance of inverted polymer solar cells with randomly oriented ZnO nanorods coupled with atomic layer deposited ZnO

    Science.gov (United States)

    Zafar, Muhammad; Yun, Ju-Young; Kim, Do-Heyoung

    2017-03-01

    Nanostructuring of the electron transport layer (ETL) in organic photovoltaic cells (OPV) is of great interest because it increases the surface area of the cell and electron transport. In this work, hydrothermally grown, randomly oriented, and low areal density ZnO nanorods (NRs) have been adopted as the ETL, and the effect of adding atomic layer deposited (ALD) ZnO on the ZnO NRs on the inverted organic solar cell performance has been investigated. The fabricated inverted organic solar cell with 5-nm-thick ALD-ZnO grown on the ZnO NRs showed the highest power conversion efficiency (PCE) of 3.08%, which is an enhancement of 85% from that of the cell without ALD-ZnO (PCE = 1.67%). The ultrathin ALD-ZnO was found to act as a curing layer of the surface defects on the hydrothermally grown ZnO NRs, resulting in an improvement in photovoltaic performance.

  11. Noninvasive bipolar double-pulsed-field-gradient NMR reveals signatures for pore size and shape in polydisperse, randomly oriented, inhomogeneous porous media.

    Science.gov (United States)

    Shemesh, Noam; Ozarslan, Evren; Adiri, Tal; Basser, Peter J; Cohen, Yoram

    2010-07-28

    Noninvasive characterization of pore size and shape in opaque porous media is a formidable challenge. NMR diffusion-diffraction patterns were found to be exceptionally useful for obtaining such morphological features, but only when pores are monodisperse and coherently placed. When locally anisotropic pores are randomly oriented, conventional diffusion NMR methods fail. Here, we present a simple, direct, and general approach to obtain both compartment size and shape even in such settings and even when pores are characterized by internal field gradients. Using controlled porous media, we show that the bipolar-double-pulsed-field-gradient (bp-d-PFG) methodology yields diffusion-diffraction patterns from which pore size can be directly obtained. Moreover, we show that pore shape, which cannot be obtained by conventional methods, can be directly inferred from the modulation of the signal in angular bp-d-PFG experiments. This new methodology significantly broadens the types of porous media that can be studied using noninvasive diffusion-diffraction NMR.

  12. Spectral coarse grained controllability of complex networks

    Science.gov (United States)

    Wang, Pei; Xu, Shuang

    2017-07-01

    With the accumulation of interaction data from various systems, a fundamental question in network science is how to reduce the sizes while keeping certain properties of complex networks. Combined the spectral coarse graining theory and the structural controllability of complex networks, we explore the structural controllability of undirected complex networks during coarse graining processes. We evidence that the spectral coarse grained controllability (SCGC) properties for the Erdös-Rényi (ER) random networks, the scale-free (SF) random networks and the small-world (SW) random networks are distinct from each other. The SW networks are very robust, while the SF networks are sensitive during the coarse graining processes. As an emergent properties for the dense ER networks, during the coarse graining processes, there exists a threshold value of the coarse grained sizes, which separates the controllability of the reduced networks into robust and sensitive to coarse graining. Investigations on some real-world complex networks indicate that the SCGC properties are varied among different categories and different kinds of networks, some highly organized social or biological networks are more difficult to be controlled, while many man-made power networks and infrastructure networks can keep the controllability properties during the coarse graining processes. Furthermore, we speculate that the SCGC properties of complex networks may depend on their degree distributions. The associated investigations have potential implications in the control of large-scale complex networks, as well as in the understanding of the organization of complex networks.

  13. Grain dissection as a grain size reducing mechanism during ice microdynamics

    Science.gov (United States)

    Steinbach, Florian; Kuiper, Ernst N.; Eichler, Jan; Bons, Paul D.; Drury, Martin R.; Griera, Albert; Pennock, Gill M.; Weikusat, Ilka

    2017-04-01

    Ice sheets are valuable paleo-climate archives, but can lose their integrity by ice flow. An understanding of the microdynamic mechanisms controlling the flow of ice is essential when assessing climatic and environmental developments related to ice sheets and glaciers. For instance, the development of a consistent mechanistic grain size law would support larger scale ice flow models. Recent research made significant progress in numerically modelling deformation and recrystallisation mechanisms in the polycrystalline ice and ice-air aggregate (Llorens et al., 2016a,b; Steinbach et al., 2016). The numerical setup assumed grain size reduction is achieved by the progressive transformation of subgrain boundaries into new high angle grain boundaries splitting an existing grain. This mechanism is usually termed polygonisation. Analogue experiments suggested, that strain induced grain boundary migration can cause bulges to migrate through the whole of a grain separating one region of the grain from another (Jessell, 1986; Urai, 1987). This mechanism of grain dissection could provide an alternative grain size reducing mechanism, but has not yet been observed during ice microdynamics. In this contribution, we present results using an updated numerical approach allowing for grain dissection. The approach is based on coupling the full field theory crystal visco-plasticity code (VPFFT) of Lebensohn (2001) to the multi-process modelling platform Elle (Bons et al., 2008). VPFFT predicts the mechanical fields resulting from short strain increments, dynamic recrystallisation process are implemented in Elle. The novel approach includes improvements to allow for grain dissection, which was topologically impossible during earlier simulations. The simulations are supported by microstructural observations from NEEM (North Greenland Eemian Ice Drilling) ice core. Mappings of c-axis orientations using the automatic fabric analyser and full crystallographic orientations using electron

  14. Stochastic rocket dynamics under random nozzle side loads: Ornstein-Uhlenbeck boundary layer separation and its coarse grained connection to side loading and rocket response

    Energy Technology Data Exchange (ETDEWEB)

    Keanini, R.G.; Srivastava, N.; Tkacik, P.T. [Department of Mechanical Engineering, University of North Carolina at Charlotte, 9201 University City Blvd., Charlotte, NC 28078 (United States); Weggel, D.C. [Department of Civil and Environmental Engineering, University of North Carolina at Charlotte, 9201 University City Blvd., Charlotte, NC 28078 (United States); Knight, P.D. [Mitchell Aerospace and Engineering, Statesville, North Carolina 28677 (United States)

    2011-06-15

    A long-standing, though ill-understood problem in rocket dynamics, rocket response to random, altitude-dependent nozzle side-loads, is investigated. Side loads arise during low altitude flight due to random, asymmetric, shock-induced separation of in-nozzle boundary layers. In this paper, stochastic evolution of the in-nozzle boundary layer separation line, an essential feature underlying side load generation, is connected to random, altitude-dependent rotational and translational rocket response via a set of simple analytical models. Separation line motion, extant on a fast boundary layer time scale, is modeled as an Ornstein-Uhlenbeck process. Pitch and yaw responses, taking place on a long, rocket dynamics time scale, are shown to likewise evolve as OU processes. Stochastic, altitude-dependent rocket translational motion follows from linear, asymptotic versions of the full nonlinear equations of motion; the model is valid in the practical limit where random pitch, yaw, and roll rates all remain small. Computed altitude-dependent rotational and translational velocity and displacement statistics are compared against those obtained using recently reported high fidelity simulations [Srivastava, Tkacik, and Keanini, J. Appl. Phys. 108, 044911 (2010)]; in every case, reasonable agreement is observed. As an important prelude, evidence indicating the physical consistency of the model introduced in the above article is first presented: it is shown that the study's separation line model allows direct derivation of experimentally observed side load amplitude and direction densities. Finally, it is found that the analytical models proposed in this paper allow straightforward identification of practical approaches for: (i) reducing pitch/yaw response to side loads, and (ii) enhancing pitch/yaw damping once side loads cease. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  15. The influence of whole grain products and red meat on intestinal microbiota composition in normal weight adults: a randomized crossover intervention trial.

    Directory of Open Access Journals (Sweden)

    Jana Foerster

    Full Text Available Intestinal microbiota is related to obesity and serum lipid levels, both risk factors for chronic diseases constituting a challenge for public health. We investigated how a diet rich in whole grain (WG products and red meat (RM influences microbiota. During a 10-week crossover intervention study, 20 healthy adults consumed two isocaloric diets, one rich in WG products and one high in RM. Repeatedly data on microbiota were assessed by 16S rRNA based denaturing gradient gel electrophoresis (DGGE. A blood sample and anthropometric data were collected. Mixed models and logistic regression were used to investigate effects. Microbiota showed interindividual variability. However, dietary interventions modified microbiota appearance: 8 bands changed in at least 4 participants during the interventions. One of the bands appearing after WG and one increasing after RM remained significant in regression models and were identified as Collinsella aerofaciens and Clostridium sp. The WG intervention lowered obesity parameters, while the RM diet increased serum levels of uric acid and creatinine. The study showed that diet is a component of major relevance regarding its influence on intestinal microbiota and that WG has an important role for health. The results could guide investigations of diet and microbiota in observational prospective cohort studies. Trial registration: ClinicalTrials.gov NCT01449383.

  16. DEVELOPMENT OF GRAIN MARKET IN UKRAINE

    Directory of Open Access Journals (Sweden)

    Aleksandr Maslak

    2015-11-01

    Full Text Available The subject of the research is a set of theoretical, methodological and practical fundamentals of organizational and economic functioning are integrated agricultural formations in the grain market of Ukraine. The methodological basis of research is the complex analysis of economic processes in the grain market in Ukraine and the world. During research we used such methods as method of systematization and comparison, statistic, economic, balance, constructive, target-oriented, and the methods of induction and deduction, analogy and comparison. Main aim of this article is the analysis of the situation on the grain market in Ukraine, defining the role of integrated agricultural formations in this market, improving the organizational-economic mechanism of its functioning, identifies ways of improving the competitiveness of Ukraine among world exporters of grain. Using results of the studies we examined trends grain market in Ukraine; influence of businesses in grain production; analysis of constraints to improve production efficiency of grain; defined domestic (internal needs of grain in Ukraine; assessed the status and expediency transformation infrastructure of the grain market of Ukraine; defined priority directions of development of the grain market in Ukraine. As a result of the preparation of articles, it is obtained the following conclusions: Ukraine is the world's largest producers and exporters of grain, the production of integrated agricultural units to a third of the total grain; technical condition of farm does not meet the needs of production; the domestic market is unable to provide the existing demand for grain production, contributing to export growth; Ukraine has a number of problems due to increased grain production, namely the shortage of storage capacity for the storage of grain, limited performance transshipment of grain in port elevators and imperfection and depreciation of transport systems; solving the existing problems is

  17. Experimental Study of Disruption of Columnar Grains During Rapid Solidification in Additive Manufacturing

    Science.gov (United States)

    Manogharan, Guha; Yelamanchi, Bharat; Aman, Ronald; Mahbooba, Zaynab

    2016-03-01

    Over the years, many studies have been conducted to study and analyze the grain structures of metal alloys during additive manufacturing to improve mechanical properties. In particular, columnar grains are observed predominantly during rapid solidification of molten metal. This leads to lower mechanical properties and requires expensive secondary heat-treatment processes. This study is aimed at disrupting the formation of columnar grain growth during rapid solidification using ultrasonic vibration and analyzes the effects on grain structure and mechanical properties. A gas-metal arc welder mounted on a Rep-Rap-based low-cost metal 3 Dimension printer was used to deposit ER70S-6 mild steel layers on a plate. A contact-type ultrasonic transducer with a control system to vary the frequency and power of the vibration was used. The effects of ultrasonic vibration were determined from the statistical analysis of microstructure and micro-indentation techniques on the deposited layer and heat-affected zone. It was found that both frequency and interaction between frequency and power had significant impact on the refinement of average grain size up to 10.64% and increased the number of grains by approximately 41.78%. Analysis of micro-indentation tests showed that there was an increase of approximately 14.30% in micro-hardness due to the applied frequency during rapid solidification. A pole diagram shows that application of vibration causes randomization of grain orientation. Along with the results from this study, further efforts in modeling and experimentation of multi-directional vibrations would lead to a better understanding of disrupting columnar grains in applications that use mechanical vibrations, such as welding, directed energy deposition, brazing, etc.

  18. Arm rehabilitation in post stroke subjects: A randomized controlled trial on the efficacy of myoelectrically driven FES applied in a task-oriented approach.

    Science.gov (United States)

    Jonsdottir, Johanna; Thorsen, Rune; Aprile, Irene; Galeri, Silvia; Spannocchi, Giovanna; Beghi, Ettore; Bianchi, Elisa; Montesano, Angelo; Ferrarin, Maurizio

    2017-01-01

    Motor recovery of persons after stroke may be enhanced by a novel approach where residual muscle activity is facilitated by patient-controlled electrical muscle activation. Myoelectric activity from hemiparetic muscles is then used for continuous control of functional electrical stimulation (MeCFES) of same or synergic muscles to promote restoration of movements during task-oriented therapy (TOT). Use of MeCFES during TOT may help to obtain a larger functional and neurological recovery than otherwise possible. Multicenter randomized controlled trial. Eighty two acute and chronic stroke victims were recruited through the collaborating facilities and after signing an informed consent were randomized to receive either the experimental (MeCFES assisted TOT (M-TOT) or conventional rehabilitation care including TOT (C-TOT). Both groups received 45 minutes of rehabilitation over 25 sessions. Outcomes were Action Research Arm Test (ARAT), Upper Extremity Fugl-Meyer Assessment (FMA-UE) scores and Disability of the Arm Shoulder and Hand questionnaire. Sixty eight subjects completed the protocol (Mean age 66.2, range 36.5-88.7, onset months 12.7, range 0.8-19.1) of which 45 were seen at follow up 5 weeks later. There were significant improvements in both groups on ARAT (median improvement: MeCFES TOT group 3.0; C-TOT group 2.0) and FMA-UE (median improvement: M-TOT 4.5; C-TOT 3.5). Considering subacute subjects (time since stroke < 6 months), there was a trend for a larger proportion of improved patients in the M-TOT group following rehabilitation (57.9%) than in the C-TOT group (33.2%) (difference in proportion improved 24.7%; 95% CI -4.0; 48.6), though the study did not meet the planned sample size. This is the first large multicentre RCT to compare MeCFES assisted TOT with conventional care TOT for the upper extremity. No adverse events or negative outcomes were encountered, thus we conclude that MeCFES can be a safe adjunct to rehabilitation that could promote recovery of

  19. Arm rehabilitation in post stroke subjects: A randomized controlled trial on the efficacy of myoelectrically driven FES applied in a task-oriented approach.

    Directory of Open Access Journals (Sweden)

    Johanna Jonsdottir

    Full Text Available Motor recovery of persons after stroke may be enhanced by a novel approach where residual muscle activity is facilitated by patient-controlled electrical muscle activation. Myoelectric activity from hemiparetic muscles is then used for continuous control of functional electrical stimulation (MeCFES of same or synergic muscles to promote restoration of movements during task-oriented therapy (TOT. Use of MeCFES during TOT may help to obtain a larger functional and neurological recovery than otherwise possible.Multicenter randomized controlled trial.Eighty two acute and chronic stroke victims were recruited through the collaborating facilities and after signing an informed consent were randomized to receive either the experimental (MeCFES assisted TOT (M-TOT or conventional rehabilitation care including TOT (C-TOT. Both groups received 45 minutes of rehabilitation over 25 sessions. Outcomes were Action Research Arm Test (ARAT, Upper Extremity Fugl-Meyer Assessment (FMA-UE scores and Disability of the Arm Shoulder and Hand questionnaire.Sixty eight subjects completed the protocol (Mean age 66.2, range 36.5-88.7, onset months 12.7, range 0.8-19.1 of which 45 were seen at follow up 5 weeks later. There were significant improvements in both groups on ARAT (median improvement: MeCFES TOT group 3.0; C-TOT group 2.0 and FMA-UE (median improvement: M-TOT 4.5; C-TOT 3.5. Considering subacute subjects (time since stroke < 6 months, there was a trend for a larger proportion of improved patients in the M-TOT group following rehabilitation (57.9% than in the C-TOT group (33.2% (difference in proportion improved 24.7%; 95% CI -4.0; 48.6, though the study did not meet the planned sample size.This is the first large multicentre RCT to compare MeCFES assisted TOT with conventional care TOT for the upper extremity. No adverse events or negative outcomes were encountered, thus we conclude that MeCFES can be a safe adjunct to rehabilitation that could promote recovery

  20. Nuclear magnetic relaxation induced by exchange-mediated orientational randomization: Longitudinal relaxation dispersion for a dipole-coupled spin-1/2 pair

    Science.gov (United States)

    Chang, Zhiwei; Halle, Bertil

    2013-10-01

    In complex biological or colloidal samples, magnetic relaxation dispersion (MRD) experiments using the field-cycling technique can characterize molecular motions on time scales ranging from nanoseconds to microseconds, provided that a rigorous theory of nuclear spin relaxation is available. In gels, cross-linked proteins, and biological tissues, where an immobilized macromolecular component coexists with a mobile solvent phase, nuclear spins residing in solvent (or cosolvent) species relax predominantly via exchange-mediated orientational randomization (EMOR) of anisotropic nuclear (electric quadrupole or magnetic dipole) couplings. The physical or chemical exchange processes that dominate the MRD typically occur on a time scale of microseconds or longer, where the conventional perturbation theory of spin relaxation breaks down. There is thus a need for a more general relaxation theory. Such a theory, based on the stochastic Liouville equation (SLE) for the EMOR mechanism, is available for a single quadrupolar spin I = 1. Here, we present the corresponding theory for a dipole-coupled spin-1/2 pair. To our knowledge, this is the first treatment of dipolar MRD outside the motional-narrowing regime. Based on an analytical solution of the spatial part of the SLE, we show how the integral longitudinal relaxation rate can be computed efficiently. Both like and unlike spins, with selective or non-selective excitation, are treated. For the experimentally important dilute regime, where only a small fraction of the spin pairs are immobilized, we obtain simple analytical expressions for the auto-relaxation and cross-relaxation rates which generalize the well-known Solomon equations. These generalized results will be useful in biophysical studies, e.g., of intermittent protein dynamics. In addition, they represent a first step towards a rigorous theory of water 1H relaxation in biological tissues, which is a prerequisite for unravelling the molecular basis of soft

  1. Thickness effect on the structure, grain size, and local piezoresponse of self-polarized lead lanthanum zirconate titanate thin films

    Energy Technology Data Exchange (ETDEWEB)

    Melo, M.; Araújo, E. B., E-mail: eudes@dfq.feis.unesp.br [Departamento de Física e Química, Faculdade de Engenharia de Ilha Solteira, UNESP—Univ. Estadual Paulista, 15385-000 Ilha Solteira, SP (Brazil); Shvartsman, V. V. [Institute for Materials Science, University Duisburg-Essen, 45141 Essen (Germany); Shur, V. Ya. [Institute of Natural Sciences, Ural Federal University, 620000 Ekaterinburg (Russian Federation); Kholkin, A. L. [Institute of Natural Sciences, Ural Federal University, 620000 Ekaterinburg (Russian Federation); Department of Physics and CICECO—Aveiro Institute of Materials, University of Aveiro, 3810-193 Aveiro (Portugal)

    2016-08-07

    Polycrystalline lanthanum lead zirconate titanate (PLZT) thin films were deposited on Pt/TiO{sub 2}/SiO{sub 2}/Si substrates to study the effects of the thickness and grain size on their structural and piezoresponse properties at nanoscale. Thinner PLZT films show a slight (100)-orientation tendency that tends to random orientation for the thicker film, while microstrain and crystallite size increases almost linearly with increasing thickness. Piezoresponse force microscopy and autocorrelation function technique were used to demonstrate the existence of local self-polarization effect and to study the thickness dependence of correlation length. The obtained results ruled out the bulk mechanisms and suggest that Schottky barriers near the film-substrate are likely responsible for a build-in electric field in the films. Larger correlation length evidence that this build-in field increases the number of coexisting polarization directions in larger grains leading to an alignment of macrodomains in thinner films.

  2. Ferro- and piezoelectric properties of polar-axis-oriented CaBi4Ti4O15 films

    Science.gov (United States)

    Kato, Kazumi; Fu, Desheng; Suzuki, Kazuyuki; Tanaka, Kiyotaka; Nishizawa, Kaori; Miki, Takeshi

    2004-05-01

    Polar-axis-oriented CaBi4Ti4O15 (CBTi144) films were fabricated on Pt foils using a complex metal alkoxide solution. The 500-nm-thick film showed the columnar structure and consisted of well-developed grains. The a/b-axis orientation of the ferroelectric films is considered to be associated with the preferred orientation of Pt foil. The film showed good ferro- and piezoelectric properties. The Pr and Ec were 25 μC/cm2 and 306 kV/cm, respectively, at an applied voltage of 115 V. The d33 was characterized as 30 pm/V by piezoresponse force microscopy. The values were twice as large as those of the CBTi144 thin film with random orientation. The polar-axis-oriented CBTi144 films would open up possibilities for devices as Pb-free piezoelectric materials.

  3. Review - Fabrication of crystal-oriented barium-bismuth titanate ceramics in high magnetic field and subsequent reaction sintering

    Directory of Open Access Journals (Sweden)

    Satoshi Tanaka, Yusuke Tomita, Ryoichi Furushima, Hiroyuki Shimizu, Yutaka Doshida and Keizo Uematsu

    2009-01-01

    Full Text Available High magnetic field was applied to fabricate novel lead-free piezoelectric ceramics with a textured structure. A compact of crystallographically oriented grains was prepared by dry forming in a high magnetic field from a mixed slurry of bismuth titanate and barium titanate powders. Bismuth titanate particles with a size of about 1 μ m were used as the host material. In the forming process, the slurry was poured into a mold and set in a magnetic field of 10 T until completely dried. Bismuth titanate particles were highly oriented in the slurry under the magnetic field. The dried powder compact consisted of highly oriented bismuth titanate particles and randomly oriented barium titanate particles. Barium bismuth titanate ceramics with a- and b-axis orientations were successfully produced from the dried compact by sintering at temperatures above 1100 ° C.

  4. Correlated NanoSIMS, TEM, and XANES Studies of Presolar Grains

    Science.gov (United States)

    Groopman, Evan Edward

    surrounded by turbostratic graphite within a low-density SN graphite grain. Nanocrystalline cores consisting of randomly-oriented 2-4 nm sheets of graphene and surrounded by concentric shells of graphite have been observed in high-density presolar graphite grains from Asymptotic Giant Branch stars, whose grains are typically microstructurally distinct from SN graphite grains. These vastly different stellar environments briefly formed similar nanocrystalline structures before diverging in the structure of their mantling graphite to be typical of AGB and SN grains. While relatively few correlated NanoSIMS and TEM studies have been performed previously, which this research thesis aims to expand, my collaborators and I also endeavored to add a third correlated technique, STXM/XANES, which had previously not been applied to presolar grains. XANES allows for the investigation of molecular bonds, which we used to help infer physical and chemical properties of stellar ejecta. I investigated the C K-edge and Ti L-edge of molecular bonds in both presolar graphite grains and their TiC subgrains. The presolar graphite grains, while overwhelmingly composed of aromatic C molecules, host a wide variety of minor organic molecules. Considering the large isotopic anomalies in the grains, these minor components are not likely due to contamination. I also investigated the valence state of Ti in Ti-rich subgrains and plan to work towards illuminating the effect that V in solid solution has upon the TiC bonds.

  5. The Relevance of Grain Dissection for Grain Size Reduction in Polar Ice: Insights from Numerical Models and Ice Core Microstructure Analysis

    Directory of Open Access Journals (Sweden)

    Florian Steinbach

    2017-09-01

    Full Text Available The flow of ice depends on the properties of the aggregate of individual ice crystals, such as grain size or lattice orientation distributions. Therefore, an understanding of the processes controlling ice micro-dynamics is needed to ultimately develop a physically based macroscopic ice flow law. We investigated the relevance of the process of grain dissection as a grain-size-modifying process in natural ice. For that purpose, we performed numerical multi-process microstructure modeling and analyzed microstructure and crystallographic orientation maps from natural deep ice-core samples from the North Greenland Eemian Ice Drilling (NEEM project. Full crystallographic orientations measured by electron backscatter diffraction (EBSD have been used together with c-axis orientations using an optical technique (Fabric Analyser. Grain dissection is a feature of strain-induced grain boundary migration. During grain dissection, grain boundaries bulge into a neighboring grain in an area of high dislocation energy and merge with the opposite grain boundary. This splits the high dislocation-energy grain into two parts, effectively decreasing the local grain size. Currently, grain size reduction in ice is thought to be achieved by either the progressive transformation from dislocation walls into new high-angle grain boundaries, called subgrain rotation or polygonisation, or bulging nucleation that is assisted by subgrain rotation. Both our time-resolved numerical modeling and NEEM ice core samples show that grain dissection is a common mechanism during ice deformation and can provide an efficient process to reduce grain sizes and counter-act dynamic grain-growth in addition to polygonisation or bulging nucleation. Thus, our results show that solely strain-induced boundary migration, in absence of subgrain rotation, can reduce grain sizes in polar ice, in particular if strain energy gradients are high. We describe the microstructural characteristics that can be

  6. The relevance of grain dissection for grain size reduction in polar ice: insights from numerical models and ice core microstructure analysis

    Science.gov (United States)

    Steinbach, Florian; Kuiper, Ernst-Jan N.; Eichler, Jan; Bons, Paul D.; Drury, Martyn R.; Griera, Albert; Pennock, Gill M.; Weikusat, Ilka

    2017-09-01

    The flow of ice depends on the properties of the aggregate of individual ice crystals, such as grain size or lattice orientation distributions. Therefore, an understanding of the processes controlling ice micro-dynamics is needed to ultimately develop a physically based macroscopic ice flow law. We investigated the relevance of the process of grain dissection as a grain-size-modifying process in natural ice. For that purpose, we performed numerical multi-process microstructure modelling and analysed microstructure and crystallographic orientation maps from natural deep ice-core samples from the North Greenland Eemian Ice Drilling (NEEM) project. Full crystallographic orientations measured by electron backscatter diffraction (EBSD) have been used together with c-axis orientations using an optical technique (Fabric Analyser). Grain dissection is a feature of strain-induced grain boundary migration. During grain dissection, grain boundaries bulge into a neighbouring grain in an area of high dislocation energy and merge with the opposite grain boundary. This splits the high dislocation-energy grain into two parts, effectively decreasing the local grain size. Currently, grain size reduction in ice is thought to be achieved by either the progressive transformation from dislocation walls into new high-angle grain boundaries, called subgrain rotation or polygonisation, or bulging nucleation that is assisted by subgrain rotation. Both our time-resolved numerical modelling and NEEM ice core samples show that grain dissection is a common mechanism during ice deformation and can provide an efficient process to reduce grain sizes and counter-act dynamic grain-growth in addition to polygonisation or bulging nucleation. Thus, our results show that solely strain-induced boundary migration, in absence of subgrain rotation, can reduce grain sizes in polar ice, in particular if strain energy gradients are high. We describe the microstructural characteristics that can be used to

  7. Large modulation of carrier transport by grain-boundary molecular packing and microstructure in organic thin films

    KAUST Repository

    Rivnay, Jonathan

    2009-11-08

    Solution-processable organic semiconductors are central to developing viable printed electronics, and performance comparable to that of amorphous silicon has been reported for films grown from soluble semiconductors. However, the seemingly desirable formation of large crystalline domains introduces grain boundaries, resulting in substantial device-to-device performance variations. Indeed, for films where the grain-boundary structure is random, a few unfavourable grain boundaries may dominate device performance. Here we isolate the effects of molecular-level structure at grain boundaries by engineering the microstructure of the high-performance n-type perylenediimide semiconductor PDI8-CN 2 and analyse their consequences for charge transport. A combination of advanced X-ray scattering, first-principles computation and transistor characterization applied to PDI8-CN 2 films reveals that grain-boundary orientation modulates carrier mobility by approximately two orders of magnitude. For PDI8-CN 2 we show that the molecular packing motif (that is, herringbone versus slip-stacked) plays a decisive part in grain-boundary-induced transport anisotropy. The results of this study provide important guidelines for designing device-optimized molecular semiconductors. © 2009 Macmillan Publishers Limited. All rights reserved.

  8. Microbiota of kefir grains

    Directory of Open Access Journals (Sweden)

    Tomislav Pogačić

    2013-03-01

    Full Text Available Kefir grains represent the unique microbial community consisting of bacteria, yeasts, and sometimes filamentous moulds creating complex symbiotic community. The complexity of their physical and microbial structures is the reason that the kefir grains are still not unequivocally elucidated. Microbiota of kefir grains has been studied by many microbiological and molecular approaches. The development of metagenomics, based on the identification without cultivation, is opening new possibilities for identification of previously nonisolated and non-identified microbial species from the kefir grains. Considering recent studies, there are over 50 microbial species associated with kefir grains. The aim of this review is to summarise the microbiota composition of kefir grains. Moreover, because of technological and microbiological significance of the kefir grains, the paper provides an insight into the microbiological and molecular methods applied to study microbial biodiversity of kefir grains.

  9. Skill-building through Task-Oriented Motor Practice (STOMP) intervention for activities of daily living: study protocol for a randomized, single blinded clinical trial.

    Science.gov (United States)

    Ciro, C A; Stoner, J; Prodan, C; Hershey, L

    2016-01-01

    Progressive disability in activities of daily living (ADL) is inevitable for people with Alzheimer's disease and related dementias (ADRD). Attempts to slow or prevent ADL disability have been unsuccessful despite making progress in behavioral training methods. Missing from this research is an emphasis on how we maximize a patient's engagement during training and the rigorous examination of implementation protocols (dosing and training methods) which may advantage learning in people with ADRD. Our team addressed this gap with the development of the STOMP (Skill-building through Task-Oriented Motor Practice) intervention which creates methods for obtaining ADL goals that support "personhood" and tests high-intensity protocols that appear to advantage learning and sustained learning over time. Through this study, we aim to evaluate differential outcomes by dose levels as well as assess the moderating effects of attention to task during training. Randomized-controlled trial with 32 participants with dementia assigned to either the original, intensive STOMP protocol (3 hours/day, 5 days/week for 2 weeks) or a less-intensive STOMP protocol (1 hour/day, 2 days/week for 2 weeks) delivered by an occupational therapy assistant in the home. ADL training is delivered using motor learning theory techniques of blocked practice, continuous verbal praise, errorless learning and intense dosing schedules. Inclusion criteria: English speaking, adults 50-80 years old that live with a legally-authorized representative that can provide consent, who can follow a one-step command, have three ADL goals they want to address and can participate in an intense therapy protocol. Exclusions include diagnoses of Creutzfeldt-Jakob Dementia, delirium or receptive/global aphasia. Recruitment will occur through direct mailing, physician referral and media/support group presentations. Blinded occupational therapists will complete baseline, post-intervention and 3-month follow-up assessments in the

  10. A Cellular Automaton / Finite Element model for predicting grain texture development in galvanized coatings

    Science.gov (United States)

    Guillemot, G.; Avettand-Fènoël, M.-N.; Iosta, A.; Foct, J.

    2011-01-01

    Hot-dipping galvanizing process is a widely used and efficient way to protect steel from corrosion. We propose to master the microstructure of zinc grains by investigating the relevant process parameters. In order to improve the texture of this coating, we model grain nucleation and growth processes and simulate the zinc solid phase development. A coupling scheme model has been applied with this aim. This model improves a previous two-dimensional model of the solidification process. It couples a cellular automaton (CA) approach and a finite element (FE) method. CA grid and FE mesh are superimposed on the same domain. The grain development is simulated at the micro-scale based on the CA grid. A nucleation law is defined using a Gaussian probability and a random set of nucleating cells. A crystallographic orientation is defined for each one with a choice of Euler's angle (Ψ,θ,φ). A small growing shape is then associated to each cell in the mushy domain and a dendrite tip kinetics is defined using the model of Kurz [2]. The six directions of basal plane and the two perpendicular directions develop in each mushy cell. During each time step, cell temperature and solid fraction are then determined at micro-scale using the enthalpy conservation relation and variations are reassigned at macro-scale. This coupling scheme model enables to simulate the three-dimensional growing kinetics of the zinc grain in a two-dimensional approach. Grain structure evolutions for various cooling times have been simulated. Final grain structure has been compared to EBSD measurements. We show that the preferentially growth of dendrite arms in the basal plane of zinc grains is correctly predicted. The described coupling scheme model could be applied for simulated other product or manufacturing processes. It constitutes an approach gathering both micro and macro scale models.

  11. Optical sizing of irregular snow grains

    Directory of Open Access Journals (Sweden)

    A. A. Kokhanovsky

    2011-09-01

    Full Text Available We discuss a possibility of snow grain size determination using spectral reflectance measurements in the near-infrared part of the electromagnetic spectrum. Errors related to often made assumption of the sphericity of grains are studied. Also we introduce a new method for the snow albedo and snow pollution monitoring using measurements in the visible part of the electromagnetic theory. Both exact and approximate methods of the radiative transfer are used for the solution of corresponding inverse problem. It is assumed that snow grains can be presented as randomly distributed irregular fractal particles. The developed techniques are applied to both ground and satellite data.

  12. Emission of dislocations from grain boundaries by grain boundary dissociation

    Science.gov (United States)

    Hoagland, Richard G.; Valone, Steven M.

    2015-01-01

    In this article, we examine the conditions that favour the emission of Shockley partial dislocations (SPDs) that standoff from a grain boundary (GB) plane by a few lattice parameters as part of the atomic structure of some GBs. To do so, we consider GBs to be formed by the operation of arrays of intrinsic grain boundary dislocations (GBDs) that create the tilt and twist misorientation, and the lattice mismatch between the two crystal grains adjoining the GB. The conditions to be considered that favour SPDs are the following: (1) Frank's rule, (2) the proper sequential arrangement of partial dislocations to bound an intrinsic stacking fault and (3) the equilibrium stand-off distance (ESD). We apply an isotropic elasticity analysis to compute the ESD, in the absence of an applied stress, for SPDs emerging from asymmetric tilt GBs in two FCC metals, Cu and Al. The ESD is shown to be dependent on the glide plane orientation relative to the GB plane and on the position of the glide planes, relative to the position of the GBDs. An applied stress increases the ESD up to a critical stress that removes the SPDs without limit from the GB. We examine the effect of the stacking fault energy on the ESD and critical stress. The critical stress is effectively linearly dependent on the stacking fault energy. Finally, we present results of atomistic simulations of asymmetric tilt Σ11[1 0 1]{4 1 4}||{2 5 2} GBs in Cu bicrystal models subject to shock loading that behave in a manner similar to the elasticity predictions. The atomistic simulations reveal additional behaviour associated with elastic incompatibility between the two grains in the bicrystal models.

  13. Randomized controlled trial of a family-oriented self-management program to improve self-efficacy, glycemic control and quality of life among Thai individuals with Type 2 diabetes.

    Science.gov (United States)

    Wichit, Nutchanath; Mnatzaganian, George; Courtney, Mary; Schulz, Paula; Johnson, Maree

    2017-01-01

    We evaluated a theoretically-derived family-oriented intervention aimed to improve self-efficacy, self-management, glycemic control and quality of life in individuals living with Type 2 diabetes in Thailand. In a single-blinded randomized controlled trial, 140 volunteer individuals with Type 2 diabetes, recruited from a diabetes clinic in rural Thailand, were randomly allocated to intervention and control arms. Those in the intervention arm received routine care plus a family-oriented program that included education classes, group discussions, a home visit, and a telephone follow-up while the control arm only received routine care. Improvement in outcomes over time (baseline, Week 3, and Week 13 following intervention) was evaluated using Generalized Estimating Equations multivariable analyses. Except for age, no between-group significant differences were observed in all other baseline characteristics. Diabetes self-efficacy, self-management, and quality of life improved in the intervention arm but no improvement was observed in the controls. In the risk-adjusted multivariable models, compared to the controls, the intervention arm had significantly better self-efficacy, self-management, outcome expectations, and diabetes knowledge (plife or glycemic control, however, in the risk-adjusted multivariable models, higher self-management scores were associated with significantly decreased HbA1c levels (plife (pfamily-oriented program improved patients' self-efficacy and self-management, which in turn could decrease HbA1c levels. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

  14. Collisions between grains in a turbulent gas. [in interstellar medium

    Science.gov (United States)

    Voelk, H. J.; Morfill, G. E.; Roeser, S.; Jones, F. C.

    1980-01-01

    Turbulent gas motions will induce random velocities of small dust grains that are imbedded in the gas. Within large eddies the friction forces from the gas lead to strongly correlated velocities for neighboring grains, whereas small eddies cause uncorrelated grain motions. The nonlinear response of a grain to eddy motion is calculated. This leads to a turbulent pressure within the dust component as well as to collisions between pairs of grains. The results are evaluated numerically for a Kolmogoroff spectrum and turbulent collision rates are calculated for molecular clouds and protostellar environments. Whereas grain-grain collisions should not modify the initial size distribution in molecular clouds to a significant extent, they will lead to an entirely different grain population in protostars.

  15. An Optical Study of Ice Grain Boundaries

    Science.gov (United States)

    Thomson, Erik S.

    The equilibrium phase geometry and evolution of polycrystals underlies the nature of materials. In particular, grain boundaries dominate the total interfacial area within polycrystalline materials. Our experimental studies are motivated by the importance of the structure, evolution, and thermodynamic behavior of grain boundaries near bulk melting temperatures. Ice is singled out as a material of interest due to its geophysical importance and its advantageous optical properties. An experimental apparatus and light reflection technique is designed to measure grain boundary melting in ice bicrystals, in thermodynamic equilibrium The technique allows continuous monitoring of reflected light intensity from the grain boundary as the temperature and solutal composition are systematically varied. For each sample the individual crystal orientations are also measured. The type and concentration of impurity in the liquid is controlled and the temperature is continuously recorded and controlled over a range near the melting point. An optical model of the interface is developed in order to convert experimental reflection data into a physical measurement of the liquidity of the grain boundary. Solutions are found for reflection and transmission amplitude coefficients for waves propagating from an arbitrarily oriented uniaxial anisotropic material into an isotropic material. This general model is used to determine solutions for three layer, ice/water/ice, systems with crystals of arbitrary orientation, and is broadly applicable to layered materials. Experimental results show thicker grain boundary liquid layers than expected from classical colligative effects. A physically realistic model of intermolecular interactions succeeds in bounding the measurements. These measurements may have important implications for understanding a wide range of effects in polycrystalline materials. Likewise, the experimental techniques and optical theory may be applied to other systems of broad

  16. Oxygen-induced giant grain growth in Ag films

    Science.gov (United States)

    Birnbaum, A. J.; Thompson, C. V.; Steuben, J. C.; Iliopoulos, A. P.; Michopoulos, J. G.

    2017-10-01

    Thin film crystallites typically exhibit normal or abnormal growth with maximum grain size limited by energetic and geometric constraints. Although epitaxial methods have been used to produce large single crystal regions, they impose limitations that preclude some compelling applications. The generation of giant grain thin film materials has broad implications for fundamental property analysis and applications. This work details the production of giant grains in Ag films (2.5 μm-thick), ranging in size from ≈50 μm to 1 mm, on silicon nitride films upon silicon substrates. The presence of oxygen during film deposition plays a critical role in controlling grain size and orientation.

  17. Effects of the oriental herbal medicine Bofu-tsusho-san in obesity hypertension: a multicenter, randomized, parallel-group controlled trial (ATH-D-14-01021.R2).

    Science.gov (United States)

    Azushima, Kengo; Tamura, Kouichi; Haku, Sona; Wakui, Hiromichi; Kanaoka, Tomohiko; Ohsawa, Masato; Uneda, Kazushi; Kobayashi, Ryu; Ohki, Kohji; Dejima, Toru; Maeda, Akinobu; Hashimoto, Tatsuo; Oshikawa, Jin; Kobayashi, Yusuke; Nomura, Koichiro; Azushima, Chieko; Takeshita, Yasuyo; Fujino, Ryota; Uchida, Ken; Shibuya, Ken; Ando, Daisaku; Tokita, Yasuo; Fujikawa, Tetsuya; Toya, Yoshiyuki; Umemura, Satoshi

    2015-05-01

    There is no clinical evidence that supports the benefit of integrative medicine, defined as combination therapy of oriental and western medicine, on obesity-related hypertension. This study evaluates the efficacy of Bofu-tsusho-san (BOF), an oriental herbal medicine, on the ambulatory blood pressure (BP) profile in hypertensive patients with obesity. The study design was a multicenter, randomized, open-label, parallel-group controlled trial in 107 hypertensive patients with obesity. Participants were randomly assigned to receive either the conventional control therapy or BOF add-on therapy. In both groups antihypertensive therapy was aimed at achieving the target clinic BP. The primary outcome was change in the ambulatory BP profile from baseline to 24 weeks after randomization. Daytime systolic BP variability, an important parameter of ambulatory BP profile, was decreased in the BOF group, and the difference in the changes in daytime systolic BP variability was significant between the BOF and control group (Control vs BOF; the change from baseline in daytime systolic BP variability, 1.0±3.3 vs -1.0±3.3%; p=0.006). The BOF add-on therapy effectively improved the ambulatory BP variability. This is the first report suggesting that an integrative medicine approach may exert favorable effects on obesity-related hypertension compared with conventional pharmaceutical treatment. UMIN000003878. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

  18. Pollen Grains, Random Walks and Einstein

    Indian Academy of Sciences (India)

    dard, Moles of hydrogen. oxy- gen and water, respectively weigh 2.32 and 18 grams. and. NA. • the number of molecules in one mole, named in honour of. Avogadro. is about 6 x 1023 , In particular. note that measuring. NA tells us that one hydrogen atom (and ...... motor proteins in celIs, the analysis of DNA sequences,.

  19. Electromechanical Response of Polycrystalline Barium Titanate Resolved at the Grain Scale

    DEFF Research Database (Denmark)

    Majkut, Marta; Daniels, John E.; Wright, Jonathan P.

    2017-01-01

    critical for understanding bulk polycrystalline ferroic behavior. Here, three-dimensional X-ray diffraction is used to reconstruct a 3D grain map (grain orientations and neighborhoods) of a polycrystalline barium titanate sample and track the grain-scale non-180° ferroelectric domain switching strains...... on the crystallographic orientation relative to the field directions, the response of individual grains is also heterogeneous. These unique experimental results are of critical importance both when building the starting conditions and considering the validity of grain-scale modeling efforts, and provide additional...

  20. Microbiota of kefir grains

    OpenAIRE

    Tomislav Pogačić; Sanja Šinko; Šimun Zamberlin; Dubravka Samaržija

    2013-01-01

    Kefir grains represent the unique microbial community consisting of bacteria, yeasts, and sometimes filamentous moulds creating complex symbiotic community. The complexity of their physical and microbial structures is the reason that the kefir grains are still not unequivocally elucidated. Microbiota of kefir grains has been studied by many microbiological and molecular approaches. The development of metagenomics, based on the identification without cultivation, is opening new possibilities f...

  1. Grain Boundary Complexions

    Science.gov (United States)

    2014-05-01

    deter- mine bulk materials behavior and properties such as superplasticity, creep, fatigue, corrosion , strength and conductivity [2]. Grain boundary...interface (i.e. lattice mismatch accommodated by interface dislocations ), wetting transitions will not occur. A wetting transition is possible in the case...melting only starts around dislocations at low- angle grain boundaries; the grain boundary structure con- sists of isolated liquid pools separated by

  2. Compaction of cereal grain

    OpenAIRE

    Wychowaniec, J.; Griffiths, I.; Gay, A; Mughal, A.

    2013-01-01

    We report on simple shaking experiments to measure the compaction of a column of Firth oat grain. Such grains are elongated anisotropic particles with a bimodal polydispersity. In these experiments, the particle configurations start from an initially disordered, low-packing-fraction state and under vertical shaking evolve to a dense state with evidence of nematic-like structure at the surface of the confining tube. This is accompanied by an increase in the packing fraction of the grain.

  3. Compaction of cereal grain

    Science.gov (United States)

    Wychowaniec, J.; Griffiths, I.; Gay, A.; Mughal, A.

    2013-11-01

    We report on simple shaking experiments to measure the compaction of a column of Firth oat grain. Such grains are elongated anisotropic particles with a bimodal polydispersity. In these experiments, the particle configurations start from an initially disordered, low-packing-fraction state and under vertical shaking evolve to a dense state with evidence of nematic-like structure at the surface of the confining tube. This is accompanied by an increase in the packing fraction of the grain.

  4. Characterization of tin crystal orientation evolution during thermal cycling in lead-free solder joints

    Science.gov (United States)

    Zhou, Bite

    resistant to fracture in the low-strain package design cracked. Nevertheless, at the early stage of deformation in WLCSP samples, more dramatic plastic deformation and damage was observed in a row of solder balls with similar c-axis orientations (with the [001] direction nearly aligned with the interface plane). Microstructure evolution preceding crack propagation is apparent in all package designs. Both continuous and discontinuous recrystallization processes were observed in solder joints after thermal cycling. More significant microstructure evolution and recrystallization occurred in higher strain package designs. Statistical analysis reveals that there is an increase in the number of high energy high angle grain boundaries and a decrease of low energy low angle and twin boundaries during thermal cycling. Crack propagation was facilitated by the high angle random boundaries developed during recrystallization, whereas the twin boundaries (with near 60° misorientation about the Sn [100] axis) were more resistant to cracking. The relative ease of the deformation of different Sn grain orientations also influenced crack development. Crack propagation was impeded by the hard orientations (with c -axis normal to the interface) that developed during continuous recrystallization. The gradual lattice rotation during the continuous recrystallization process is correlated with dislocation slip on facile slip systems. Local concentration of elastic strain and orientation gradients inside a continuously recrystallized grain are correlated with slip activities, and locally recovered regions may become nucleation sites for the primary recrystallization upon further straining.

  5. Implications of solute super-saturation in growth of vaporisation-induced recrystallised grains during heat treatment in Ni-base superalloys

    Energy Technology Data Exchange (ETDEWEB)

    D' Souza, Neil; Welton, Dean [Rolls-Royce plc, Derby (United Kingdom); Wang, Hang [Birmingham Univ. (United Kingdom). School of Metallurgy and Materials

    2015-03-15

    The role of vaporisation in the evolution of surface micro-structural instability has been investigated in Ni-base superalloys during heat treatment below the solvus temperature. Initial nucleation of beta (β) grains at the surface with random orientations arose from vaporisation of Ni, Co and Cr with subsequent de-stabilisation of gamma (γ) phase. Further vaporisation and inter-diffusion resulted in a discontinuous reaction (secondary reaction zone - gamma prime (γ') matrix + topologically close packed phases with needle-like morphology). On the other hand, advancement of the secondary reaction zone grain boundary was shown to be dependent only on the solute supersaturation ahead of the boundary. The driving force for growth of the secondary reaction zone was calculated from the Gibbs energy change and nearly all of this force was available to pull the grain boundary.

  6. Inferential statistics of electron backscatter diffraction data from within individual crystalline grains

    DEFF Research Database (Denmark)

    Bachmann, Florian; Hielscher, Ralf; Jupp, Peter E.

    2010-01-01

    -spatial statistical analysis adapts ideas borrowed from the Bingham quaternion distribution on . Special emphasis is put on the mathematical definition and the numerical determination of a `mean orientation' characterizing the crystallographic grain as well as on distinguishing several types of symmetry......Highly concentrated distributed crystallographic orientation measurements within individual crystalline grains are analysed by means of ordinary statistics neglecting their spatial reference. Since crystallographic orientations are modelled as left cosets of a given subgroup of SO(3), the non...

  7. Numerical Investigation of Grain Coarsening and Coalescence Model

    Science.gov (United States)

    Muradova, Aliki D.; Hristopulos, Dionisios T.

    2015-01-01

    A kinetic nonlinear model of mass transfer, grain coarsening and coalescence with potential applications in sintering processes is studied. The model involves nonlinear differential equations that determine the transport of mass between grains. The rate of mass transfer is controlled by the activation energy (an Arrhenius factor) leading to a nonlinear model of mass transfer and grain coarsening. The resulting dynamical system of coupled nonlinear differential equations with random initial conditions (i.e., initial grain mass configuration) is solved by means of the Runge-Kutta method. An analysis of the fixed points of the two-grain system is carried out, and the solution of the multi-grain system is studied. We incorporate coalescence of smaller grains with larger neighbors using a cellular automaton step in the evolution of the system.

  8. The effect of whole grain wheat sourdough bread consumption on serum lipids in healthy normoglycemic/normoinsulinemic and hyperglycemic/hyperinsulinemic adults depends on presence of the APOE E3/E3 genotype: a randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Bakovic Marica

    2010-05-01

    Full Text Available Abstract Background Epidemiological studies associate consumption of whole grain foods, including breads, with reduced cardiovascular disease (CVD risk; however, few studies have compared wheat whole grains with wheat refined grains. Methods This study investigated effects of 6-week consumption of whole grain wheat sourdough bread in comparison to white bread on fasting serum lipids in normoglycemic/normoinsulinemic (NGI; n = 14 and hyperglycemic/hyperinsulinemic (HGI; n = 14 adults. The influence of single-nucleotide polymorphisms, 3 within the APOE gene (E2, E3, E4 and 2 within the hepatic lipase gene promoter (LIPC -514C>T, LIPC -250G>A were considered. Results At baseline, HGI participants had significantly higher body weight, waist circumference, body fat, and fasted glucose, insulin, homeostasis model assessment of insulin resistance (HOMA-IR, glucagon, triacylglycerols (TAG and TAG:HDL-cholesterol, compared to NGI participants; however, none of these in addition to none of the other serum lipids, differed between bread treatments, within either participant group. For participants with the APOE E3/E3 genotype, LDL-cholesterol (P = 0.02 increased in the NGI group (n = 7, and TAG (P = 0.03 and TAG:HDL-cholesterol (P = 0.04 increased in the HGI group (n = 10, following consumption of whole grain wheat sourdough compared to white bread. Conclusions In summary, 6-week consumption of whole grain wheat sourdough bread did not significantly modulate serum lipids in NGI or HGI adults; however, it significantly increased LDL-cholesterol, TAG and TAG:HDL-cholesterol in participants with the APOE E3/E3 genotype. These data add to limited literature comparing wheat whole grains to wheat refined grains on CVD risk and highlight the need to consider genetic variation in relation to lipoprotein lipid content and CVD risk.

  9. Coarse-graining complex dynamics

    DEFF Research Database (Denmark)

    Sibani, Paolo

    2013-01-01

    Continuous Time Random Walks (CTRW) are widely used to coarse-grain the evolution of systems jumping from a metastable sub-set of their configuration space, or trap, to another via rare intermittent events. The multi-scaled behavior typical of complex dynamics is provided by a fat-tailed distribu......Continuous Time Random Walks (CTRW) are widely used to coarse-grain the evolution of systems jumping from a metastable sub-set of their configuration space, or trap, to another via rare intermittent events. The multi-scaled behavior typical of complex dynamics is provided by a fat......-tailed distribution of the waiting time between consecutive jumps. We first argue that CTRW are inadequate to describe macroscopic relaxation processes for three reasons: macroscopic variables are not self-averaging, memory effects require an all-knowing observer,and different mechanisms whereby the jumps affect......: while CTRW make use of a renewal process involving identical traps of infinite size, RD embodies a dynamical entrenchment into a hierarchy of traps which are finite in size and possess different degrees of meta-stability. We show in particular how RD produces the stretched exponential, power...

  10. Magnetic hysteresis in small-grained Co{sub x}Pd{sub 1−x} nanowire arrays

    Energy Technology Data Exchange (ETDEWEB)

    Viqueira, M.S. [Facultad de Matemática, Astronomía y Física, Universidad Nacional de Córdoba. Ciudad Universitaria, 5000 Córdoba (Argentina); Instituto de Física Enrique Gaviola – CONICET (Argentina); Pozo-López, G. [Facultad de Matemática, Astronomía y Física, Universidad Nacional de Córdoba. Ciudad Universitaria, 5000 Córdoba (Argentina); Instituto de Física Enrique Gaviola – CONICET (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) (Argentina); Urreta, S.E., E-mail: urreta@famaf.unc.edu.ar [Facultad de Matemática, Astronomía y Física, Universidad Nacional de Córdoba. Ciudad Universitaria, 5000 Córdoba (Argentina); Condó, A.M. [Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) (Argentina); Centro Atómico Bariloche, Comisión Nacional de Energía Atómica – Instituto Balseiro, Universidad Nacional de Cuyo. Av. Bustillo 9500, 8400, San Carlos de Bariloche (Argentina); Cornejo, D.R. [Instituto de Física, Universidade de São Paulo, 05508-900 São Paulo, SP (Brazil); and others

    2015-11-15

    Co–Pd nanowires with small grain size are fabricated by AC electrodeposition into hexagonally ordered alumina pores, 20–35 nm in diameter and about 1 µm long. The effects of the alloy composition, the nanowire diameter and the grain size on the hysteresis properties are considered. X-ray diffraction indicates that the nanowires are single phase, a fcc Co–Pd solid solution; electron microscopy results show that they are polycrystalline, with randomly oriented grains (7–12 nm), smaller than the wire diameter. Nanowire arrays are ferromagnetic, with an easy magnetization axis parallel to the nanowire long axis. Both, the coercive field and the loop squareness monotonously increase with the Co content and with the grain size, but no clear correlation with the wire diameter is found. The Co and Co-rich nanowire arrays exhibit coercive fields and reduced remanence values quite insensitive to temperature in the range 4 K–300 K; on the contrary, in Pd-rich nanowires both magnitudes are smaller and they largely increase during cooling below 100 K. These behaviors are systematized by considering the strong dependences displayed by the magneto-crystalline anisotropy and the saturation magnetostriction on composition and temperature. At low temperatures the effective anisotropy value and the domain-wall width to grain size ratio drastically change, promoting less cooperative and harder nucleation modes. - Highlights: • Polycrystalline Co–Pd nanowires, 20–35 nm diameter, 5–12 nm grain size are synthesized. • Coercivity (14–80 mT) and squareness mainly depend on composition and grain size. • Different contributions to the effective anisotropy are considered. • Strong temperature and composition dependence of the nucleation localization is found.

  11. Pattern recognition in bees : orientation discrimination

    NARCIS (Netherlands)

    Hateren, J.H. van; Srinivasan, M.V.; Wait, P.B.

    1990-01-01

    Honey bees (Apis mellifera, worker) were trained to discriminate between two random gratings oriented perpendicularly to each other. This task was quickly learned with vertical, horizontal, and oblique gratings. After being trained on perpendicularly-oriented random gratings, bees could discriminate

  12. Whole-grain wheat consumption reduces inflammation in a randomized controlled trial on overweight and obese subjects with unhealthy dietary and lifestyle behaviors: role of polyphenols bound to cereal dietary fiber.

    Science.gov (United States)

    Vitaglione, Paola; Mennella, Ilario; Ferracane, Rosalia; Rivellese, Angela A; Giacco, Rosalba; Ercolini, Danilo; Gibbons, Sean M; La Storia, Antonietta; Gilbert, Jack A; Jonnalagadda, Satya; Thielecke, Frank; Gallo, Maria A; Scalfi, Luca; Fogliano, Vincenzo

    2015-02-01

    Epidemiology associates whole-grain (WG) consumption with several health benefits. Mounting evidence suggests that WG wheat polyphenols play a role in mechanisms underlying health benefits. The objective was to assess circulating concentration, excretion, and the physiologic role of WG wheat polyphenols in subjects with suboptimal dietary and lifestyle behaviors. A placebo-controlled, parallel-group randomized trial with 80 healthy overweight/obese subjects with low intake of fruit and vegetables and sedentary lifestyle was performed. Participants replaced precise portions of refined wheat (RW) with a fixed amount of selected WG wheat or RW products for 8 wk. At baseline and every 4 wk, blood, urine, feces, and anthropometric and body composition measures were collected. Profiles of phenolic acids in biological samples, plasma markers of metabolic disease and inflammation, and fecal microbiota composition were assessed. WG consumption for 4-8 wk determined a 4-fold increase in serum dihydroferulic acid (DHFA) and a 2-fold increase in fecal ferulic acid (FA) compared with RW consumption (no changes). Similarly, urinary FA at 8 wk doubled the baseline concentration only in WG subjects. Concomitant reduction in plasma tumor necrosis factor-α (TNF-α) after 8 wk and increased interleukin (IL)-10 only after 4 wk with WG compared with RW (P = 0.04) were observed. No significant change in plasma metabolic disease markers over the study period was observed, but a trend toward lower plasma plasminogen activator inhibitor 1 with higher excretion of FA and DHFA in the WG group was found. Fecal FA was associated with baseline low Bifidobacteriales and Bacteroidetes abundances, whereas after WG consumption, it correlated with increased Bacteroidetes and Firmicutes but reduced Clostridium. TNF-α reduction correlated with increased Bacteroides and Lactobacillus. No effect of dietary interventions on anthropometric measurements and body composition was found. WG wheat

  13. Can Whole-Grain Foods Lower Blood Pressure?

    Science.gov (United States)

    ... whole-grain foods on blood pressure and other cardiovascular risk markers in healthy middle-aged persons: A randomized controlled trial. The American Journal of Clinical Nutrition. 2010;92:733. Your guide to lowering blood ...

  14. A New Grain Refiner for Ferritic Steels

    Science.gov (United States)

    Li, Ming; Li, Jian-Min; Zheng, Qing; Qiu, Dong; Wang, Geoff; Zhang, Ming-Xing

    2017-12-01

    A new grain refiner, LaB6, was identified for ferritic steels based on the crystallographic calculation using the edge-to-edge matching model. Addition of 0.5 wt pct LaB6 led to a reduction of the average grain size from 765 to 92 μm and the proportion of the columnar structure from 35 to 8 pct in an as-cast Fe-4Si ferritic alloy. Although LaB6 was supposed to act as an active inoculant for δ-ferrite, thermodynamic calculation indicated that LaB6 is not thermodynamically stable in the melt of the Fe-4Si alloy. It was subject to decompose into La and B solutes. Consequently, both La and B reacted with Fe, O and S, forming different compounds. Microstructural examination at room temperature observed La2SO2 and La2O3 particles within the ferrite grains and Fe2B along the grain boundaries in the samples. Through EBSD analysis, a reproducible orientation relationship between ferrite and La2SO2 was identified. In addition, the edge-to-edge matching calculation also predicted the high potency for La2SO2 to be an effective nucleant for δ-ferrite. It was considered that the grain refinement of LaB6 was attributed to the enhanced heterogeneous nucleation of δ-ferrite by La2SO2, and the solute effect of B due to the high Q-value in ferrite.

  15. A New Grain Refiner for Ferritic Steels

    Science.gov (United States)

    Li, Ming; Li, Jian-Min; Zheng, Qing; Qiu, Dong; Wang, Geoff; Zhang, Ming-Xing

    2017-10-01

    A new grain refiner, LaB6, was identified for ferritic steels based on the crystallographic calculation using the edge-to-edge matching model. Addition of 0.5 wt pct LaB6 led to a reduction of the average grain size from 765 to 92 μm and the proportion of the columnar structure from 35 to 8 pct in an as-cast Fe-4Si ferritic alloy. Although LaB6 was supposed to act as an active inoculant for δ-ferrite, thermodynamic calculation indicated that LaB6 is not thermodynamically stable in the melt of the Fe-4Si alloy. It was subject to decompose into La and B solutes. Consequently, both La and B reacted with Fe, O and S, forming different compounds. Microstructural examination at room temperature observed La2SO2 and La2O3 particles within the ferrite grains and Fe2B along the grain boundaries in the samples. Through EBSD analysis, a reproducible orientation relationship between ferrite and La2SO2 was identified. In addition, the edge-to-edge matching calculation also predicted the high potency for La2SO2 to be an effective nucleant for δ-ferrite. It was considered that the grain refinement of LaB6 was attributed to the enhanced heterogeneous nucleation of δ-ferrite by La2SO2, and the solute effect of B due to the high Q-value in ferrite.

  16. Grain boundaries: Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Balluffi, R.W.; Bristowe, P.D.

    1988-02-01

    Quantitative measurements of grain boundary structure factors using x-ray diffraction have been performed on low angle (001) twist boundaries in gold. Also, a computer atomistic simulation program is being implemented to examine the equilibrium properties of a series of boundaries in gold. Simulation of boundaries at room temperature have been performed. Electron microscopy of grain boundary melting in aluminum was also performed. Results indicated an absence of melting. (CBS)

  17. Patient orientation and professional orientation of Dutch dentists.

    Science.gov (United States)

    Bruers, J Josef M; Felling, Albert J A; Truin, Gert Jan; van't Hof, Martin A; van Rossum, Ger M J M

    2004-04-01

    By providing dental health care, dentists dedicate themselves to the preservation and/or improvement of oral health in their patients. By adequately carrying out this care providers' role, dentists will gain recognition, esteem and respect from both patients and colleagues. This analysis aims to assess the patient and professional orientation of dentists and investigate which of their personal and practice characteristics can be regarded determining for these two aspects of their role as care providers. In the year 2000, data was collected via a written questionnaire sent to a random, stratified sample of 790 dentists, of whom 607 (77%) responded. Multivariate regression analysis shows that the preventive treatment concept, professional satisfaction and the number of hours per week that household tasks are performed are positive determinants for dentists' patient orientation. Also, the longer dentists are active in their profession, the more patient oriented they will be, and with more hours per week support from oral hygienists they are less patient oriented. As for professional orientation, dentists' preventive treatment concept and their professional satisfaction can also be considered positive determinants. Furthermore, dentists are more profession oriented when their partner works in the practice, with more hours per week support from oral hygienist(s) and with more collaboration contacts with other care providers. Compared to men, women are on average less profession oriented. Among Dutch dentists, there exist clear differences in the way they take on their role as care providers with regard to patient orientation and professional orientation.

  18. Orienteering club

    CERN Multimedia

    Club d'orientation

    2015-01-01

    Course d'orientation La reprise des courses d’orientation était attendue dans la région puisque près de 150 coureurs ont participé à la première épreuve automnale organisée par le club d’orientation du CERN sur le site de La Faucille. Les circuits ont été remportés par Yann Locatelli du club d’Orientation Coeur de Savoie avec 56 secondes d’avance sur Damien Berguerre du club SOS Sallanches pour le parcours technique long, Marie Vuitton du club CO CERN (membre également de l’Equipe de France Jeune) pour le parcours technique moyen avec presque 4 minutes d’avance sur Jeremy Wichoud du club Lausanne-Jorat, Victor Dannecker pour le circuit technique court devant Alina Niggli, Elliot Dannecker pour le facile moyen et Alice Merat sur le facile court, tous membres du club O’Jura. Les résultats comp...

  19. Evolution of texture in an ultrafine and nano grained magnesium alloy

    Directory of Open Access Journals (Sweden)

    S.M. Fatemi

    2015-06-01

    Full Text Available The evolution of texture was discussed during the formation of ultra-fine and nano grains in a magnesium alloy severely deformed through accumulative back extrusion (ABE. The microstructure and texture obtained after applying multiple deformation passes at temperatures of 100 and 250°C were characterized. The results showed that after single ABE pass at 100°C an ultrafine/nano grained microstructure was obtained, while the initial texture was completely replaced by a new fiber basal texture, inclined at 40°C to the transverse direction. As the processing temperature increased to 250°C, the obtained texture intensities were strengthened, though the c-axis of crystals gradually rotated towards the transverse direction and a fiber texture parallel to normal direction was developed. Moreover, repetitive ABE was associated with the tendency of the basal plane to lie parallel to TD, while the orientation of the prismatic planes showed a random distribution around ND. After eight passes, the most noticeable texture obtained included the fiber basal texture oriented almost parallel to the transverse direction, and perpendicular to the ED and parallel to the ND. The maximum texture intensity decreased as the number of passes increased, which is attributed to strain path change involved during each consecutive ABE pass, as well as promoted the contribution of non-basal slip systems.

  20. 4D Study of Grain Growth in Armco Iron Using Laboratory X-ray Diffraction Contrast Tomography

    DEFF Research Database (Denmark)

    Sun, Jun; Lyckegaard, Allan; Zhang, Yubin

    2017-01-01

    Using a novel laboratory diffraction contrast tomography (LabDCT) technique, a non-destructive 4D study was conducted to investigate the evolution in 3D of the grain structure during grain growth in an Armco iron sample. The 3D grain morphology and the crystallographic orientations of more than 3...

  1. Orienteering Club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Courses d’orientation Une bonne dizaine de clubs étaient représentés samedi dernier à La Faucille pour participer à la  2e manche de la coupe genevoise organisée par le club du CERN. Les 120 coureurs ont pu découvrir des parcours classés "technique". Ceux du Haut-Jura familiarisés à ce type de terrain ont pu sortir leur épingle du jeu et se sont octroyé la victoire sur 4 des 5 circuits. Samedi 21 septembre, la montagne du Haut-Jura était encore plébiscitée puisque les coureurs étaient attendus à Saint Cergue sur la carte des Pralies. Pour les résultats complets de La Faucille et les informations sur la prochaine étape, consultez le site du club http://cern.ch/club-orientation.

  2. Singularities in primate orientation maps.

    Science.gov (United States)

    Obermayer, K; Blasdel, G G

    1997-04-01

    We report the results of an analysis of orientation maps in primate striate cortex with focus on singularities and their distribution. Data were obtained from squirrel monkeys and macaque monkeys of different ages. We find the approximately 80% of singularities that are nearest neighbors have the opposite sign and that the spatial distribution of singularities differs significantly from a random distribution of points. We do not find evidence for consistent geometric patterns that singularities may form across the cortex. Except for a different overall alignment of orientation bands and different periods of repetition, maps obtained from different animals and different ages are found similar with respect to the measures used. Orientation maps are then compared with two different pattern models that are currently discussed in the literature: bandpass-filtered white noise, which accounts very well for the overall map structure, and the field analogy model, which specifies the orientation map by the location of singularities and their properties. The bandpass-filtered noise approach to orientation patterns correctly predicts the sign correlations between singularities and accounts for the deviations in the spatial distribution of singularities away from a random dot pattern. The field analogy model can account for the structure of certain local patches of the orientation map but not for the whole map. Neither of the models is completely satisfactory, and the structure of the orientation map remains to be fully explained.

  3. Orientation Club

    CERN Multimedia

    Club d'orientation

    2014-01-01

    COURSE ORIENTATION Résultats de samedi 10 mai    C’est sur une carte entièrement réactualisée dans les bois de Versoix, que plus de 100 coureurs sont venus participer à la course d’orientation, type longue distance, préparée par des membres du club du CERN. Le terrain plutôt plat nécessitait une orientation à grande vitesse, ce qui a donné les podiums suivants :  Technique long avec 17 postes : 1er Jurg Niggli, O’Jura en 52:48, 2e Beat Muller, COLJ Lausanne-Jorat en 58:02, 3e Christophe Vuitton, CO CERN en 58:19 Technique moyen avec 13 postes : 1er Jean-Bernard Zosso, CO CERN, en 46:05 ; 2e Yves Rousselot, Balise 25 Besançon, en 55:11 ; 3e Laurent Merat, O'Jura, en 55:13 Technique court avec 13 postes : 1er Julien Vuitton, CO CERN en 40:59, 2e Marc Baumgartner, CO CERN en 43:18, 3e Yaelle Mathieu en 51:42 Su...

  4. Orienteering Club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Courses d’orientation ce printemps Le Club d’orientation du CERN vous invite à venir découvrir la course d’orientation et vous propose, en partenariat avec d’autres clubs de la région, une dizaine de courses populaires. Celles-ci ont lieu les samedis après-midi, elles sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé, en famille ou en individuel, en promenade ou en course. Si vous êtes débutant vous pouvez profiter d’une petite initiation offerte par l’organisateur avant de vous lancer sur un parcours. Divers types de parcours sont à votre choix lors de chaque épreuve : facile court (2-3 km), facile moyen (3-5 km), technique court (3-4 km), technique moyen (4-5 km) et technique long (5-7 km). Les dates à retenir sont les suivantes : Samedi 23 mars: Pully (Vd) Samedi 13 avril: Pougny...

  5. Influence of grain size in the near-micrometre regime on the deformation microstructure in aluminium

    DEFF Research Database (Denmark)

    Le, G.M.; Godfrey, A.; Hansen, Niels

    2013-01-01

    bundles and random dislocations, although at a larger compressive strain of 30% dislocation rotation boundaries may also be found in the interior of grains of this size. A standard 〈110〉 fibre texture is found for all grain sizes, with a decreasing sharpness with decreasing grain size. The structural...

  6. Soft and Hard Tissue Changes around Tissue-Oriented Tulip-Design Implant Abutments: A 1-Year Randomized Prospective Clinical Trial.

    Science.gov (United States)

    Gutmacher, Zvi; Levi, Guy; Blumenfeld, Israel; Machtei, Eli E

    2015-10-01

    The advantages of platform switching using narrower abutments remain controversial. Many researchers suggest that platform switching can yield enhanced clinical results, while others remain skeptical. We hypothesize that the effectiveness of platform switching might be associated with the degree of reduction in size of the abutment. To radiographically and clinically examine a new abutment design created to move the implant-abutment interface farther medially. This was a prospective, randomized controlled clinical trial that included 27 patients (41 MIS Lance Plus® implants; MIS Implant Technologies, Karmiel, Israel). The patients' age ranged from 39 to 75 years. At the second stage of the surgery, the implants were randomly assigned to either the new platform switch Tulip abutment (TA) design or to the standard platform abutment (SA). Implant probing depth (IPD) and bleeding on probing (BOP) were recorded at baseline and after 12 months. Standardized periapical radiographs were taken (at baseline and at 12 months) and the marginal bone height measured. All implants were successfully integrated. The mean IPD at 1 year post-op was 2.91 mm for the SA group and 2.69 mm for the TA group (p > .05). Similarly, the BOP at 1 year was almost identical in both groups. The mean values of bone resorption at baseline were 0.98 ± 0.37 mm and 0.69 ± 0.20 for the TA and SA groups, respectively (p > .05). Bone loss (baseline to 12 months) was significantly greater in the SA group compared with the TA group. Use of the new TA, with its significantly downsized diameter, resulted in reduced bone loss at 1 year. Further research will be required to assess the long-term effect of this abutment on peri-implant health. © 2014 Wiley Periodicals, Inc.

  7. Retaining {1 0 0} texture from initial columnar grains in 6.5 wt% Si electrical steels

    Science.gov (United States)

    Liang, Ruiyang; Yang, Ping; Mao, Weimin

    2017-11-01

    6.5 wt% Si electrical steel is a superior soft magnetic material with excellent magnetic properties which highly depends on texture. In this study, based on the heredity of orientation in columnar grains, columnar grains are used as the initial material to prepare non-oriented 6.5 wt% Si electrical steel with excellent magnetic properties. EBSD and XRD techniques are adopted to explore the structure and texture evolution during hot rolling, warm rolling, cold rolling and annealing. The results show that, due to the heredity of ;structure and texture; from the initial strong {1 0 0} columnar grains, annealed sheet with {1 0 0} texture had better magnetic properties, which can be used as non-oriented high-silicon electrical steel. Both preferred cube grain nucleation in deformed {1 1 3} grains in subsurface and coarse {1 0 0} deformed grains in center layer show the effect of initial columnar grains with {1 0 0} texture.

  8. Electromechanical Response of Polycrystalline Barium Titanate Resolved at the Grain Scale

    DEFF Research Database (Denmark)

    Majkut, Marta; Daniels, John E.; Wright, Jonathan P.

    2017-01-01

    critical for understanding bulk polycrystalline ferroic behavior. Here, three-dimensional X-ray diffraction is used to reconstruct a 3D grain map (grain orientations and neighborhoods) of a polycrystalline barium titanate sample and track the grain-scale non-180° ferroelectric domain switching strains......Ferroic materials are critical components in many modern devices. Polycrystalline states of these materials dominate the market due to their cost effectiveness and ease of production. Studying the coupling of ferroic properties across grain boundaries and within clusters of grains is therefore...

  9. Lattice rotations of individual bulk grains. Part 1: 3D X-ray characterization

    DEFF Research Database (Denmark)

    Poulsen, H.F.; Margulies, L.; Schmidt, S.

    2003-01-01

    dependence on the initial orientation, while the influence of grain interaction is relatively small. All grains deform plastically. Averaged over grains and reflections the rotation of the tensile axis and the FWHM of the internal spread is 2.0 and 0.8°, respectively, at 6% strain.......Three-dimensional X-ray diffraction has been applied to characterise the plastic deformation of individualgrains deeply embedded in a 99.6% pure aluminium specimen. The specimen is 4 mm thick with an average grain size of 75 μm. The average latticerotation for each grain as well as the degree...

  10. 3D diffraction imaging and orientation mapping in deformed ice crystals

    Energy Technology Data Exchange (ETDEWEB)

    Donges, Jörn, E-mail: joern.donges@desy.de [Hamburger Synchrotronstrahlungslabor at Deutsches Elektronen-Synchrotron (DESY), Notkestrasse 85, D-22607 Hamburg (Germany); Montagnat, Maurine [Laboratoire de Glaciologie et Géophysique de l’Environnement, UJF – Grenoble 1/CNRS, 54 rue Molière, F-38402 St Martin d’Hères cedex (France); Bastie, Pierre [Laboratoire Interdisciplinaire de Physique,UMR UJF – Grenoble 1/CNRS no 5588, BP 87, F-38402 St. Martin d’Hères cedex (France); Grennerat, Fanny [Laboratoire de Glaciologie et Géophysique de l’Environnement, UJF – Grenoble 1/CNRS, 54 rue Molière, F-38402 St Martin d’Hères cedex (France)

    2013-04-01

    A method to acquire three dimensional diffraction data and orientation mapping with the 2D imaging setup of Hasylab beamline G3 is presented. The method has been successfully applied to undeformed large grains extracted from ice samples and extended to the 2D determination of lattice misorientation and lattice orientation distribution within deformed grains.

  11. Why do interstellar grains exist?

    Science.gov (United States)

    Seab, C. G.; Hollenbach, D. J.; Mckee, C. F.; Tielens, Alexander G. G. M.

    1986-01-01

    There exists a discrepancy between calculated destruction rates of grains in the interstellar medium and postulated sources of new grains. This problem was examined by modelling the global life cycle of grains in the galaxy. The model includes: grain destruction due to supernovae shock waves; grain injection from cool stars, planetary nebulae, star formation, novae, and supernovae; grain growth by accretion in dark clouds; and a mixing scheme between phases of the interstellar medium. Grain growth in molecular clouds is considered as a mechanism or increasing the formation rate. To decrease the shock destruction rate, several new physical processes, such as partial vaporization effects in grain-grain collisions, breakdown of the small Larmor radius approximation for betatron acceleration, and relaxation of the steady-state shock assumption are included.

  12. Avoided Crossings in Small Metal Grains

    Science.gov (United States)

    Adam, S.; Waintal, X.; Brouwer, P. W.

    2002-03-01

    The effect of spin-orbit scattering in a generic small metal grain causes neighbouring Zeeman split energies to repel forming an avoided crossing. The magnitude of the avoided crossing energy depends on the direction of the magnetic field and the strength of the spin-orbit scattering. We use Random Matrix Theory to calculate the statistical distribution of minimal energy separations of an avoided crossing for the case of weak spin-orbit scattering.

  13. Towards realistic molecular dynamics simulations of grain boundary mobility

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, J., E-mail: zhou@imm.rwth-aachen.de [Institut fuer Metallkunde und Metallphysik, Rheinisch-Westfaelische Technische Hochschule (RWTH), Aachen (Germany); Mohles, V. [Institut fuer Metallkunde und Metallphysik, Rheinisch-Westfaelische Technische Hochschule (RWTH), Aachen (Germany)

    2011-09-15

    In order to investigate grain boundary migration by molecular dynamics (MD) simulations a new approach involving a crystal orientation-dependent driving force has been developed by imposing an appropriate driving force on grain boundary atoms and enlarging the effective range of driving force. The new approach has been validated by the work of the driving force associated with the motion of grain boundaries. With the new approach the relation between boundary migration velocity and driving force is found to be nonlinear, as was expected from rate theory for large driving forces applied in MD simulations. By evaluating grain boundary mobility nonlinearly for a set of symmetrical <1 1 1> tilt boundaries in aluminum at high temperature, high-angle grain boundaries were shown to move much faster than low-angle grain boundaries. This agrees well with experimental findings for recrystallization and grain growth. In comparison with the available data the simulated mobility of a 38.21{sup o{Sigma}}7 boundary was found to be significantly lower than other MD simulation results and comparable with the experimental values. Furthermore, the average volume involved during atomic jumps for boundary migration is determined in MD simulations for the first time. The large magnitude of the volume indicates that grain boundary migration is accomplished by the correlated motion of atom groups.

  14. Orienteering Club

    CERN Multimedia

    Le Club d’orientation du CERN

    2017-01-01

    Calendrier des courses de la Coupe Genevoise – printemps 2017 Club d'orientation - Julien,  jeune membre du club. Le Club d’orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose une série de courses populaires, qui se dérouleront des deux côtés de la frontière franco-suisse, à savoir : Samedi 1 avril : Pougny/Challex (01) Samedi 8 avril: Ballens (VD) Samedi 22 avril: Apples (VD) Samedi 29 avril: Mont Mussy (01) Samedi 6 mai: Prémanon (39) Samedi 13 mai: Mont Mourex (01) Samedi 20 mai: Prévondavaux (VD) Samedi 10 juin: Chancy/Valleiry (74) Samedi 17 juin: Trélex - Finale (VD) Ces courses sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé, en famille ou en individuel. Les inscriptions sur un des 5 parcours proposés se font sur place le jour de l...

  15. COURSE ORIENTATION

    CERN Multimedia

    Club d'orientation du CERN

    2015-01-01

      Les coureurs d’orientation de la région se sont donné rendez-vous samedi dernier dans les bois de Pougny/Challex lors de l’épreuve organisée par le club d’orientation du CERN. La carte proposée pour les 5 circuits offrait aussi bien un coté très technique avec un relief pentu qu’un coté avec de grandes zones plates à forêt claire. Le parcours technique long comportant 20 postes a été remporté par Beat Muller du COLJ Lausanne en 56:26 devançant Denis Komarov, CO CERN en 57:30 et Yvan Balliot, ASO Annecy en 57:46. Pour les autres circuits les résultats sont les suivants: Technique moyen (13 postes): 1er Joël Mathieu en 52:32 à une seconde du 2e Vladimir Kuznetsov, COLJ Lausanne-Jorat, 3e Jean-Bernard Zosso, CO CERN, en 54:01 Technique court (12 postes): 1er Lennart Jirden, ...

  16. Orienteering Club

    CERN Multimedia

    Club d'orientation

    2010-01-01

    COURSE D’ORIENTATION La finale de la coupe de printemps Après avoir remporté le challenge club, samedi 29 juin lors du relais inter-club à Lausanne, le Club d’orientation du CERN organisait la dernière étape de la coupe genevoise de printemps samedi 5 juin à Saint-Cergue dans les bois de Monteret (Canton de Vaud). Plus de 100 participants se sont déplacés pour venir participer à la finale et découvrir une toute nouvelle carte dans une forêt vallonnée. Les résultats pour chaque circuit de cette étape sont : Technique long : 1. Jurg Niggli du club O’Jura, 2. Clément Poncet, 3. Oystein Midttun. Technique moyen : 1. Zoltan Trocsanyi CO CERN, 2. Christophe Ingold, 3. Christina Falga. Technique court : 1. Pierre-Andre Baum, CARE Vevey, 2. Emese Szunyog, 3. Solène Balay. Facile moyen : 1. Elisa P...

  17. Orienteering Club

    CERN Multimedia

    Le Club d’orientation du CERN

    2017-01-01

    COURSE ORIENTATION Finale de la coupe d’automne Le club d’orientation du CERN (COC Genève) a organisé sa dernière course populaire de la saison samedi 4 novembre au lieu-dit Les Terrasses de Genève (74). Cette 9e épreuve qui se courait sous la forme d’un One-Man-Relay, clôturait ainsi la coupe genevoise d’automne dont les lauréats sont : Circuit technique long : 1. Julien Vuitton (COC Genève), 2. Berni Wehrle (COC Genève), 3. Christophe Vuitton (COC Genève). Circuit technique moyen : 1. Vladimir Kuznetsov (Lausanne-Jorat), 2. J.-Bernard Zosso (COC Genève), 3. Laurent Merat (O’Jura). Circuit technique court : 1. Thibault Rouiller (COC Genève), 2. exæquo Lennart Jirden (COC Genève) et Katya Kuznetsova (Lausanne-Jorat). Circuit facile moyen : 1. Tituan Barge ...

  18. Orienteering Club

    CERN Multimedia

    Le Club d’orientation du CERN

    2017-01-01

    COURSE ORIENTATION Finale de la coupe d’automne Le club d’orientation du CERN (COC Genève) a organisé sa dernière course populaire de la saison samedi 4 novembre au lieu-dit Les Terrasses de Genève (74). Cette 9e épreuve qui se courait sous la forme d’un One-Man-Relay, clôturait ainsi la coupe genevoise d’automne dont les lauréats sont : Circuit technique long : 1. Julien Vuitton (COC Genève), 2. Berni Wehrle (COC Genève), 3. Christophe Vuitton (COC Genève). Circuit technique moyen : 1. Vladimir Kuznetsov (Lausanne-Jorat), 2. J.-Bernard Zosso (COC Genève), 3. Laurent Merat (O’Jura). Circuit technique court : 1. Thibault Rouiller (COC Genève), 2. exæquo Lennart Jirden (COC Genève) et Katya Kuznetsova (Lausanne-Jorat). Circuit facile moyen : 1. Tituan Barge...

  19. Club Orientation

    CERN Multimedia

    Club d'orientation

    2014-01-01

      COURSE ORIENTATION   Pas moins de 100 concurrents sont venus s’affronter sur les parcours proposés par le club d’orientation du CERN ce samedi 26 avril lors de la 4e étape de la coupe genevoise de printemps. Les podiums ont été attribués à :  Technique long avec 19 postes : 1er Yvan Balliot, ASO Annecy en 1:01:39 ; 2e Dominique Fleurent, ASO Annecy, en 1:05:12 ; 3e Rémi Fournier, SOS Sallanches, en 1:05:40. Technique moyen avec 14 postes : 1er Jean-Bernard Zosso, CO CERN, en 46:42 ; 2e Céline Zosso, CO CERN, en 50:51 ; 3e Clément Poncet, O’Jura Prémanon, en 51:27. Technique court avec 13 postes : 1er Jaakko Murtomaki, YKV Seinaejoki, en 36:04 ; 2e Marc Baumgartner en 41:27 ; 3e Natalia Niggli, O’Jura Prémanon, en 52:43. Sur les parcours facile moyen et facile court, victoire respectivement de Stéphanie...

  20. Orienteering club

    CERN Multimedia

    Club d'orientation

    2010-01-01

    Course d’orientation : Coupe Genevoise de printemps 2010 Et c’est reparti pour une nouvelle saison! Pour cette coupe de printemps 2010, le Club d’Orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose le calendrier suivant: – samedi 20 mars : Cossonay (Vd) – samedi 10 avril : Echallens (Vd) – samedi 17 avril : Trélex (Vd) – samedi 24 avril : Genolier (Vd) – samedi 1 mai : Vulbens/Valleiry (74) – samedi 8 mai : Bois de la Rippe (Vd) – samedi 29 mai : Sauvabellin (Vd) : relais – samedi 5 juin: St Cergue (Vd) : grande finale Les courses populaires ont lieu en général le samedi après-midi, elles sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé, en famille ou en individuel, en promenade ou en course. Pour cela, divers types de parcours sont &agr...

  1. Orienteering club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Courses d’orientation Le soleil enfin de retour a incité nombre de sportifs et promeneurs à nous rejoindre dans la belle forêt de Challex /Pougny pour la deuxième étape de notre coupe de printemps 2013. Certains sont revenus crottés et fourbus alors que d’autres avaient les joues bien roses après un grand bol d’air frais. Mais tous avaient passé un agréable moment dans la nature. Nous rappelons que nos activités sont ouvertes à tous, jeunes, moins jeunes, sportifs, familles, du CERN ou d’ailleurs, et que le seul inconvénient est que si vous goûtez à la course d’orientation, il vous sera difficile de ne pas y revenir ! Samedi 20 avril 2013, nous serons sur le Mont Mourex (entre Gex et Divonne) pour notre prochaine épreuve et vous y serez les bienvenus. Les inscriptions et les départ...

  2. Orienteering club

    CERN Multimedia

    Orienteering Club

    2016-01-01

    Course d'orientation Calendrier des courses d’orientation Coupe genevoise d’automne 2016 Samedi 3 septembre : La Faucille (01) Samedi 10 septembre : Prémanon (39) Samedi 17 septembre : Saint-Cergue (VD) Samedi 24 septembre : Jorat / Corcelles (VD) Samedi 1 octobre: Bière - Ballens (VD) -relais Vendredi 14 octobre : Parc Mon Repos (GE) - nocturne Samedi 15 octobre : Terrasse de Genève (74) Samedi 29 octobre : Bonmont (VD) Samedi 5 novembre : Pomier (74) – one-man-relay - Finale   Courses ouvertes à toutes et à tous, sportifs, familles, débutants ou confirmés, du CERN ou d’ailleurs. Cinq circuits disponibles, ceci va du facile court (2 km) adapté aux débutants et aux enfants jusqu’au parcours technique long de 6 km pour les chevronnés en passant par les parcours facile moyen (4&am...

  3. Orienteering Club

    CERN Multimedia

    Le Club d’orientation du CERN

    2017-01-01

    Course orientation Les courses d’orientation comptant pour la coupe genevoise de printemps s’enchainent dans la région franco-suisse. Samedi dernier, une bonne centaine de coureurs se sont retrouvés au Mont Mourex où le club du CERN avait préparé la sixième épreuve. A l’issue de la course, les participants confirmaient l’exigence des circuits, à savoir la condition physique et le côté technique du traçage. Le parcours technique long comportant 20 postes a été remporté par Darrell High du Care Vevey en 1:22:38 devançant Beat Muller du COLJ Lausanne-Jorat en 1:25:25 et Alison High également du Care Vevey en 1:28:51. Le circuit technique moyen a été remporté par Christophe Vuitton du CO CERN et le circuit technique court par Claire-Lise Rouiller, CO CERN. Les trois pr...

  4. Orienteering club

    CERN Multimedia

    Club d’Orientation du CERN

    2015-01-01

    Courses d’orientation Nouvelle saison nouveau programme Le Club d’orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose une dizaine de courses populaires comptant pour la coupe Genevoise de printemps: samedi 28 mars: Vernand Dessus samedi 18 avril: Pougny/Challex samedi 25 avril: Chancy/Valleiry samedi 2 mai: Mauvernay samedi 9 mai: Longchaumois samedi 16 mai: Genolier samedi 30 mai: Prevondavaux samedi 6 juin: Biere-Ballens samedi 13 juin: Haut-Jura samedi 20 juin: Bonmont - Finale Ces courses sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé, en famille ou en individuel, en promenade ou en course. Les inscriptions se font sur place le jour de l’épreuve. Si vous êtes débutant, vous pouvez profiter d’une initiation offerte par l’organisateur avant de vous lancer sur un parcours. Le club propose aussi...

  5. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2015-01-01

    Course orientation C’est au pied du Salève, proche du Golf de Bosset, que le club d’orientation du CERN (CO CERN) a organisé samedi 19 septembre une nouvelle épreuve comptant pour la Coupe Genevoise d’automne. La zone « des Terrasses de Genève » avait été cartographiée et mise en service l’année dernière. Les participants ont pu apprécier un terrain ludique avec beaucoup de microreliefs, de points d’eau et de gros rochers, le tout au milieu d’une forêt assez claire et agréable à courir. Sur le parcours technique long, le résultat a été très serré puisque Pierrick Merino du club d’Annecy a gagné avec seulement 9 secondes d’avance sur Gaëtan Vuitton (CO CERN) qui confiait avoir perdu beaucoup du te...

  6. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2012-01-01

     Course d’orientation C’est sous un magnifique soleil que s’est tenue la 7e épreuve de la coupe genevoise organisée par le club d’orientation du CERN. Les organisateurs avaient concocté des parcours assez techniques sur le site de La Faucille. Sur le parcours technique long, beau podium avec la victoire de Domenico Lepori (double médaillés aux championnats du monde en 2010 en vétéran) du club Care Vevey en 1:00:23, juste devant Jürg Niggli du club O’Jura en 1:00:56 puis Beat Mueller du club Lausanne-Jorat en 1:04:28. Sur le parcours technique moyen, Franck Longchampt s’est octroyé la première place, sur le parcours technique court, le jeune Julien Vuitton, qui n’a pas tout à fait 11 ans, a remporté son circuit. Coté parcours facile moyen, Victor Kuznetsov a une fois de plus gagn&eacut...

  7. Grain Boundary Segregation in Metals

    CERN Document Server

    Lejcek, Pavel

    2010-01-01

    Grain boundaries are important structural components of polycrystalline materials used in the vast majority of technical applications. Because grain boundaries form a continuous network throughout such materials, their properties may limit their practical use. One of the serious phenomena which evoke these limitations is the grain boundary segregation of impurities. It results in the loss of grain boundary cohesion and consequently, in brittle fracture of the materials. The current book deals with fundamentals of grain boundary segregation in metallic materials and its relationship to the grain boundary structure, classification and other materials properties.

  8. Orientation aspects of growth during recrystallization

    Energy Technology Data Exchange (ETDEWEB)

    Juul Jensen, D.

    1997-04-01

    Recrystallization of heavily cold rolled aluminium and copper is studied with the aim of achieving information about effects of crystallography orientation on the growth process. The potentials of several experimental techniques are analysed, and a method well suited for characterizing growth rates of grains with different orientations is developed. This method, which is referred to as the extended Cahn-Hagel method, is used for growth rate determinations in aluminium and copper deformed and annealed under five different conditions. In all the investigated cases, preferential growth of cube oriented grains is observed. Recrystallization models, which simulates the orientational as well as microstructural development, are described. selected models are applied for studies of recrystallization in aluminium and copper under specific deformation and annealing conditions as well as for more general studies of the effects of orientation dependent growth rates on the recrystallization microstructure and texture. Finally, reasons for the observed orientation dependent growth rates are discussed. A new mechanism, orientation pinning, is suggested and it is shown that this mechanism is necessary for the understanding of experimental results. (au) 4 tabs., 41 ills., 153 refs.

  9. Reduction of magnetic grain size of perpendicular recording media with CoCrW seed layer

    Science.gov (United States)

    Inamura, R.; Toyoda, T.; Tanaka, T.; Uzumaki, T.

    2009-04-01

    We report the use of CoCrW seed layer (SL) for making the fine grain granular structure and high crystalline orientation of CoCrPt-oxide magnetic recording layer. It is found that CoCrW SL should be of amorphouslike structure to make fine grain of CoCrPt-oxide magnetic layer. Moreover, the smooth surface of CoCrW SL provides high crystalline orientation of the CoCrPt-oxide magnetic layer.

  10. Influence of grain size and grain boundary recombination velocity on ...

    African Journals Online (AJOL)

    The plot of the diffusion capacitance allowed us to study the influence of the following parameters: grain size, grain boundary recombination velocity, junction recombination velocity and illumination wavelength on this capacitance. This study pointed out that junction and grain boundary recombination velocities play an ...

  11. Simulation of competitive grain growth upon the directional solidification of a Ni-base superalloy

    Science.gov (United States)

    Pozdniakov, A. N.; Monastyrskiy, V. P.; Ershov, M. Yu.; Monastyrskiy, A. V.

    2015-01-01

    Using the numerical simulation in the CA-FE module of the ProCAST simulation program, a systematic investigation of competitive growth of grains in a thin plate has been performed over a wide range of values of the temperature gradient and solidification rate. It has been established that the result of the simulation in the case of converging grains depends on the only parameter, i.e., the ratio of the value of the overgrowth of the grain with the preferred orientation to the size of the cell of the computational grid. Thus, the size of the cell is an important adjusting parameter of the model and must be coordinated with the parameters of the dendritic structure under given growth conditions. The grain with the preferred orientation always displaces neighboring diverging grains. The converging grains are eliminated if their deviation from the vector of the temperature gradient exceeds 20°. At the smaller angles of deviation, the result of the competitive growth depends on the size of the computational cell and varies from their joint growth (at the cell size of 5 μm) to the displacement of grains with the preferred orientation (at the cell size of 20 μm). However, all of the results of the simulation agree with the experimental data available in the literature. For the efficient selection of grains with the preferred orientation, regimes with a low temperature gradient and high growth rate are favorable.

  12. A keystone-like grain in hornet comb cells : Its nature and physical properties

    NARCIS (Netherlands)

    Ishay, JS; Riabinin, K; Kozhevnikov, M; van der Want, H; Stokiroos, [No Value

    2003-01-01

    In the roof of cells built by the Oriental hornet, Vespa orientalis (Vespinae, Hymenoptera), there is one or more grains differing in their composition and shape from the surrounding structures. These grains have a diameter of 100-200 mum and protrude slightly from the roof inward. They contain

  13. Anisotropy of self-diffusion in forsterite grain boundaries derived from molecular dynamics simulations

    Science.gov (United States)

    Wagner, Johannes; Adjaoud, Omar; Marquardt, Katharina; Jahn, Sandro

    2016-12-01

    Diffusion rates and associated deformation behaviour in olivine have been subjected to many studies, due to the major abundance of this mineral group in the Earth's upper mantle. However, grain boundary (GB) transport studies yield controversial results. The relation between transport rate, energy, and geometry of individual GBs is the key to understand transport in aggregates with lattice preferred orientation that favours the presence and/or alignment of specific GBs over random ones in an undeformed rock. In this contribution, we perform classical molecular dynamics simulations of a series of symmetric and one asymmetric tilt GBs of Mg_2 SiO_4 forsterite, ranging from 9.58° to 90° in misorientation and varying surface termination. Our emphasis lies on unravelling structural characteristics of high- and low-angle grain boundaries and how the atomic structure influences grain boundary excess volume and self-diffusion processes. To obtain diffusion rates for different GB geometries, we equilibrate the respective systems at ambient pressure and temperatures from 1900 to 2200 K and trace their evolution for run durations of at least 1000 ps. We then calculate the mean square displacement of the different atomic species within the GB interface to estimate self-diffusion coefficients in the individual systems. Grain boundary diffusion coefficients for Mg, Si and O range from 10^{-18} to 10^{-21} m^3/s, falling in line with extrapolations from lower temperature experimental data. Our data indicate that higher GB excess volumes enable faster diffusion within the GB. Finally, we discuss two types of transport mechanisms that may be distinguished in low- and high-angle GBs.

  14. Whole grain and refined grain consumption and the risk of type 2 diabetes: a systematic review and dose-response meta-analysis of cohort studies.

    Science.gov (United States)

    Aune, Dagfinn; Norat, Teresa; Romundstad, Pål; Vatten, Lars J

    2013-11-01

    Several studies have suggested a protective effect of intake of whole grains, but not refined grains on type 2 diabetes risk, but the dose-response relationship between different types of grains and type 2 diabetes has not been established. We conducted a systematic review and meta-analysis of prospective studies of grain intake and type 2 diabetes. We searched the PubMed database for studies of grain intake and risk of type 2 diabetes, up to June 5th, 2013. Summary relative risks were calculated using a random effects model. Sixteen cohort studies were included in the analyses. The summary relative risk per 3 servings per day was 0.68 (95% CI 0.58-0.81, I(2) = 82%, n = 10) for whole grains and 0.95 (95% CI 0.88-1.04, I(2) = 53%, n = 6) for refined grains. A nonlinear association was observed for whole grains, p nonlinearity grains, p nonlinearity = 0.10. Inverse associations were observed for subtypes of whole grains including whole grain bread, whole grain cereals, wheat bran and brown rice, but these results were based on few studies, while white rice was associated with increased risk. Our meta-analysis suggests that a high whole grain intake, but not refined grains, is associated with reduced type 2 diabetes risk. However, a positive association with intake of white rice and inverse associations between several specific types of whole grains and type 2 diabetes warrant further investigations. Our results support public health recommendations to replace refined grains with whole grains and suggest that at least two servings of whole grains per day should be consumed to reduce type 2 diabetes risk.

  15. Orienteering club

    CERN Multimedia

    Club d'orientation

    2011-01-01

    Reprise fin août Le Club d’orientation, en partenariat avec d’autres clubs de la région, vous propose une nouvelle série de courses pour cet automne. Le calendrier à retenir est le suivant : Samedi 27 août : Granges Malval (GE) – type classique Samedi 10 septembre : Lamoura (39) – type classique Samedi 17 septembre : La Dôle (F/VD) – type classique Samedi 24 septembre : Monteret (VD) – relais Samedi 8 octobre : Saint Cergue (VD) – type classique Vendredi 14 octobre : Les Evaux (GE) – nocturne Samedi 15 octobre : Grand Jorat (VD) – type classique Samedi 22 octobre : Pomier (74) – type classique Samedi 5 novembre : Echallens (VD) – type classique Samedi 12 novembre : CERN (GE) - sprint - Finale Généralement cinq circuits sont disponibles : ceci va du facile court (2 km) adapt&eacu...

  16. Orienting hypnosis.

    Science.gov (United States)

    Hope, Anna E; Sugarman, Laurence I

    2015-01-01

    This article presents a new frame for understanding hypnosis and its clinical applications. Despite great potential to transform health and care, hypnosis research and clinical integration is impaired in part by centuries of misrepresentation and ignorance about its demonstrated efficacy. The authors contend that advances in the field are primarily encumbered by the lack of distinct boundaries and definitions. Here, hypnosis, trance, and mind are all redefined and grounded in biological, neurological, and psychological phenomena. Solutions are proposed for boundary and language problems associated with hypnosis. The biological role of novelty stimulating an orienting response that, in turn, potentiates systemic plasticity forms the basis for trance. Hypnosis is merely the skill set that perpetuates and influences trance. This formulation meshes with many aspects of Milton Erickson's legacy and Ernest Rossi's recent theory of mind and health. Implications of this hypothesis for clinical skills, professional training, and research are discussed.

  17. Orientation games in kindergarten

    OpenAIRE

    Pišek, Anja

    2012-01-01

    The thesis presents the area of general orientation and orientation of the child. The focus is placed on orientation games for preschool children. The first part outlines different definitions of orientation, types of orientation, accessories for orientation and major errors in orientation. It also presents the development of spatial orientation of preschool children, the development of the concept of space according to the level of cognitive development in line with the theory by Piaget,...

  18. FINE GRAIN NUCLEAR EMULSION

    Science.gov (United States)

    Oliver, A.J.

    1962-04-24

    A method of preparing nuclear track emulsions having mean grain sizes less than 0.1 microns is described. The method comprises adding silver nitrate to potassium bromide at a rate at which there is always a constant, critical excess of silver ions. For minimum size grains, the silver ion concentration is maintained at the critical level of about pAg 2.0 to 5.0 during prectpitation, pAg being defined as the negative logarithm of the silver ion concentration. It is preferred to eliminate the excess silver at the conclusion of the precipitation steps. The emulsion is processed by methods in all other respects generally similar to the methods of the prior art. (AEC)

  19. EDITORIAL: Optical orientation Optical orientation

    Science.gov (United States)

    SAME ADDRESS *, Yuri; Landwehr, Gottfried

    2008-11-01

    priority of the discovery in the literature, which was partly caused by the existence of the Iron Curtain. I had already enjoyed contact with Boris in the 1980s when the two volumes of Landau Level Spectroscopy were being prepared [2]. He was one of the pioneers of magneto-optics in semiconductors. In the 1950s the band structure of germanium and silicon was investigated by magneto-optical methods, mainly in the United States. No excitonic effects were observed and the band structure parameters were determined without taking account of excitons. However, working with cuprous oxide, which is a direct semiconductor with a relative large energy gap, Zakharchenya and his co-worker Seysan showed that in order to obtain correct band structure parameters, it is necessary to take excitons into account [3]. About 1970 Boris started work on optical orientation. Early work by Hanle in Germany in the 1920s on the depolarization of luminescence in mercury vapour by a transverse magnetic field was not appreciated for a long time. Only in the late 1940s did Kastler and co-workers in Paris begin a systematic study of optical pumping, which led to the award of a Nobel prize. The ideas of optical pumping were first applied by Georges Lampel to solid state physics in 1968. He demonstrated optical orientation of free carriers in silicon. The detection method was nuclear magnetic resonance; optically oriented free electrons dynamically polarized the 29Si nuclei of the host lattice. The first optical detection of spin orientation was demonstrated by with the III-V semiconductor GaSb by Parsons. Due to the various interaction mechanisms of spins with their environment, the effects occurring in semiconductors are naturally more complex than those in atoms. Optical detection is now the preferred method to detect spin alignment in semiconductors. The orientation of spins in crystals pumped with circularly polarized light is deduced from the degree of circular polarization of the recombination

  20. Grain alcohol study: summary

    Energy Technology Data Exchange (ETDEWEB)

    The study has concentrated upon a detailed examination of all considerations involved in the production, use, and marketing of ethyl alcohol (ethanol) as produced from the fermentation of agricultural grains. Each parameter was examined in the light of current energy markets and trends; new sources and technological, and processes for fermentation, the capability of the agricultural industry to support fermentation demand; the optimizaton of value of agricultural crops; and the efficiencies of combining related industries. Ahydrous (200 proof) ethanol makes an excellent blending component for all present automotive fuels and an excellent octane additive for unleaded fuels in proportions up to 35% without requiring modifications to current engines. There is no difference between ethanol produced by fermentation and ethanol produced synthetically from petroleum. The decision to produce ethanol one way or the other is purely economic. The agricultural industry can support a major expansion in the fermentation industry. The residue (distillers grains) from the fermentation of corn for ethanol is an excellent and economical feed for livestock and poultry. A reliable supply of distillers grain can assist in making the large beef feedlot operations more economically viable. The source materials, fuels, products and by-products of an ethanol plant, beef feedlot, gas biodigester plant, municipal waste recovery plant and a steam generated electrical plant are interrelated and mutually beneficial for energy efficiencies and economic gains when co-located. The study concludes that the establishment of such agricultural- environment industrial energy complexes, would provide a broad range of significant benefits to Indiana.

  1. Grain alcohol study: summary

    Energy Technology Data Exchange (ETDEWEB)

    The study has concentrated upon a detailed examination of all considerations involved in the production, use, and marketing of ethyl alcohol (Ethanol) as produced from the fermentation of agricultural grains. Each parameter was examined in the light of current energy markets and trends; new sources and technological, and processes for fermentation, the capability of the agricultural industry to support fermentaton demand; the optimization of value of agricultureal crops; and the efficiencies of combining related industries. Anhydrous (200 proof) ethanol makes an excellent blending component for all present automotive fuels and an excellent octane additive for unleaded fuels in proportions up to 35% without requiring modifications to current engines. There is no difference between ethanol produced by fermentation and ethanol produced synthetically from petroleum. The decision to produce ethanol one way or the other is purely economic. The agricultural industry can support a major expansion in the fermentation industry. The residue (distillers grains) from the fermentation of corn for ethanol is an excellent and economical feed for livestock and poultry. A reliable supply of distillers grains can assist in making the large beef feedlot operations more economically viable. The source materials, fuels, products and by-products of an ethanol plant, beef feedlot, gas biodigester plant, municipal waste recovery plant and a steam generated electrical plant are interrelated and mutually beneficial for energy efficiencies and economic gains when co-located. The study concludes that the establishment of such agricultural-environment industrial energy complexes, would provide a broad range of significant benefits to Indiana.

  2. No effect of 14 day consumption of whole grain diet compared to refined grain diet on antioxidant measures in healthy, young subjects: a pilot study

    Directory of Open Access Journals (Sweden)

    Slavin Joanne

    2010-03-01

    Full Text Available Abstract Background Epidemiological evidence supports that a diet high in whole grains is associated with lowered risk of chronic diseases included coronary heart disease, obesity, type 2 diabetes, and some types of cancer. One potential mechanism for the protective properties of whole grains is their antioxidant content. The aim of this study was to compare differences in antioxidant measures when subjects consumed either refined or whole grain diets. Methods Twenty healthy subjects took part in a randomized, crossover dietary intervention study. Subjects consumed either a refined grain or whole grain diet for 14 days and then the other diet for the next 14 days. Male subjects consumed 8 servings of grains per day and female subjects consumed 6 servings of grains per day. Blood and urine samples were collected at the end of each diet. Antioxidant measures included oxygen radical absorbance capacity (ORAC in blood, and isoprostanes and thiobarbituric acid reactive substances (TBARS in urine. Results The whole grain diet was significantly higher in dietary fiber, vitamin B6, folate, selenium, copper, zinc, iron, magnesium and cystine compared to the refined grain diet. Despite high intakes of whole grains, no significant differences were seen in any of the antioxidant measures between the refined and whole grain diets. Conclusions No differences in antioxidant measures were found when subjects consumed whole grain diets compared to refined grain diets.

  3. High-Resolution Single-Grain Diffraction of Polycrystalline Materials

    DEFF Research Database (Denmark)

    Lienert, Ulrich; Ribárik, Gábor; Ungar, Tamas

    2017-01-01

    . The microstructure usually influences the materials properties critically. It has been demonstrated that, by using high-energy synchrotron radiation, diffraction peaks off individual grains can be recorded in-situ during processing. Important information such as the orientation, average strain, and size...... of individual grains can be obtained, even if the peak shapes are commonly not analyzed. However, it is also well-known that the shape of diffraction peaks, if observed with sufficient resolution, contains significant information about the microstructure. While the intensity distribution in reciprocal space......). Conventional radial profile (line shape) analysis techniques average over many grains with possibly significantly different microstructure. Under conditions of single-grain diffraction, these limitations are overcome and the intensity distributions along all three directions of reciprocal space are accessible....

  4. Progress report on grain boundaries

    Science.gov (United States)

    Balluffi, R. W.; Bristowe, P. D.

    1989-06-01

    The research was focused on the following three major areas: (1) study of the atomic structure of grain boundaries by means of X-ray diffraction, transmission electron microscopy and computer modeling; (2) study of grain boundary phase transitions by electron microscopy and computer modeling; (3) investigation of the mechanism of high angle grain boundary migration. Results are briefly discussed.

  5. Progress report on grain boundaries

    Energy Technology Data Exchange (ETDEWEB)

    Balluffi, R.W.; Bristowe, P.D.

    1989-06-01

    The research was focused on the following three major areas: (1) study of the atomic structure of grain boundaries by means of x-ray diffraction, transmission electron microscopy and computer modeling; (2) study of grain boundary phase transitions by electron microscopy and computer modeling; (3) investigation of the mechanism of high angle grain boundary migration. Results are briefly discussed. 20 refs.

  6. Effects of concentrated arabinoxylan and β-glucan compared with refined wheat and whole grain rye on glucose and appetite in subjects with the metabolic syndrome: a randomized study.

    Science.gov (United States)

    Hartvigsen, M L; Gregersen, S; Lærke, H N; Holst, J J; Bach Knudsen, K E; Hermansen, K

    2014-01-01

    Several studies emphasise that arabinoxylan and β-glucan have more beneficial effects on glucose metabolism than low-dietary fibre (DF) meals. Less attention has been paid to the effects of concentrated DF compared with whole grain. We compared the effects of DF and whole grain on glucose, hormone responses and appetite in subjects with the metabolic syndrome (MetS). Fifteen subjects with MetS participated in this acute, randomised, cross-over intervention study. The test breads provided 50 g of digestible carbohydrate: wheat bread with concentrated arabinoxylan (AX) or β-glucan (BG), rye bread with kernels (RK) and wheat bread (WB) as control. Blood samples were drawn for 270 min to determine glucose, insulin, glucagon-like peptide-1, glucose-dependent insulinotropic peptide (GIP) and ghrelin. Appetite score was addressed every 30 min. Ad libitum energy intake (EI) was measured 270 min after test meals. Compared with WB, BG and RK induced lower initial glycaemic responses (Pbreads. BG lowered insulin responses more than AX (Pbread was influenced by higher protein content. Whether the metabolic effects of the breads are still present to mixed meals remains to be tested.

  7. Fission gas bubble percolation on crystallographically consistent grain boundary networks

    Energy Technology Data Exchange (ETDEWEB)

    Sabogal-Suárez, Daniel; David Alzate-Cardona, Juan, E-mail: jdalzatec@unal.edu.co; Restrepo-Parra, Elisabeth

    2016-07-15

    Fission gas release in nuclear fuels can be modeled in the framework of percolation theory, where each grain boundary is classified as open or closed to the release of the fission gas. In the present work, two-dimensional grain boundary networks were assembled both at random and in a crystallographically consistent manner resembling a general textured microstructure. In the crystallographically consistent networks, grain boundaries were classified according to its misorientation. The percolation behavior of the grain boundary networks was evaluated as a function of radial cracks and radial thermal gradients in the fuel pellet. Percolation thresholds tend to shift to the left with increasing length and number of cracks, especially in the presence of thermal gradients. In general, the topology and percolation behavior of the crystallographically consistent networks differs from those of the random network. - Highlights: • Fission gas release in nuclear fuels was studied in the framework of percolation theory. • The nuclear fuel cross-section microstructure was modeled through grain boundary networks. • The grain boundaries were classified randomly or according to its crystallography. • Differences in topology and percolation behavior for both kinds networks were determined.

  8. Orienteering club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Courses d’orientation Samedi 20 avril, les organisateurs du Club de CO du CERN ont accueilli au Mont Mourex 70 participants qui n’ont pas hésité à venir malgré la forte bise. Berni Wehrle du CO CERN s’est octroyé la première place en 1:04:49 sur le parcours technique long devant Pyry Kettunen du Saynso Juankoski en 1:06:52, la 3e place revenant à Bruno Barge, CO CERN, à 7 secondes. Les autres parcours ont été remportés par : Technique moyen : 1er Jacques Moisset, Chamonix (47:44), 2e Yves Rousselot, Balise 25 Besançon (57:16), 3e Jean-Bernard Zosso, CO CERN (59:28). Technique court : 1er Victor Kuznetsov, COLJ (51:53), 2e Pierrick Collet, CO CERN (1:12:52), 3e Dominique Balay, CO CERN (1:16:04). Pour les parcours facile moyen et facile court, Ralf Nardini et Léa Nicolas, tous deux du CO CERN, terminaient respectivement premier. Voi...

  9. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2012-01-01

    Relais inter-club/Challenge Carlo Milan Samedi dernier, lors de l’épreuve de course d’orientation organisée par le club du O’Jura, le moteur de la discipline était l’esprit d’équipe, puisqu’il était question d’un relais inter-club avec le Challenge Carlo Milan. Les clubs avaient aligné leurs coureurs soit sur le relais technique (trois participants) soit sur le relais facile (deux participants). Côté O’Jura, il fallait noter la participation de François Gonon, champion du monde 2011, côté club du CERN, Marie et Gaëtan Vuitton, jeunes espoirs du club, devaient préparer la piste pour lancer le dernier relayeur. Côté Lausanne-Jorat, il fallait compter sur le très jeune Viktor Kuznetsov. Les 31 équipes engagées n’ont pas m&ea...

  10. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2012-01-01

     Finale de la coupe de printemps   La dernière course d’orientation comptant pour la Coupe de printemps a eu lieu samedi dernier dans le village des Rousses et vers le Fort. Il s’agissait d’un sprint organisé par le club O’Jura. Les temps de course ont avoisiné les 20 minutes que ce soit pour le parcours technique moyen ou technique long. Tous les habitués étaient au rendez-vous pour venir consolider ou améliorer leur place au classement. A l’issue de cette course, le classement général de la Coupe de printemps prenant en compte les 6 meilleurs résultats des 9 courses était établi et les lauréats de chaque catégorie sont les suivants: Circuit technique long : 1er Berni Wehrle, 2e Bruno Barge, 3e Edvins Reisons. Circuit technique moyen : 1er Jean-Bernard Zosso, 2e Cédric Wehrl&...

  11. Orienteering club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Course d'orientation Vers les dernières courses de printemps Une centaine de coureurs se sont déplacés sur le site de la Roche Fendue prés de Morez pour gouter à un des 5 parcours proposés par le club du O’Jura. Le terrain était gras mais que peut-on trouver d’autre avec cette météo! Les vainqueurs de chaque circuit sont : Alina Niggli (O’Jura) facile court, Natalja Niggli (O’Jura) facile moyen, Victor Kuznetsov (COLJ) technique court, Yves Rousselot (Balise 25) technique moyen et pour finir François Gonon (O’Jura) avec une victoire haut la main sur le technique long. Il ne reste plus que deux épreuves pour la coupe genevoise de printemps : à savoir samedi 8 juin, course de type longue distance organisée par le club de Lausanne Jorat (COLJ) dans le bois de Seyte sur Mutrux/Concise, inscription de 12h &...

  12. Orienteering Club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Finale de la coupe d’automne La dernière épreuve de la coupe d’automne organisée par le club d’orientation du CERN s’est déroulée ce samedi 2 novembre avec une course au score dans le bois Tollot (GE). Les concurrents disposaient d’un temps imparti pour poinçonner le maximum de balises différemment placées selon le circuit choisi. Juerg Niggli (club O’Jura) a remporté le parcours technique long. A l’issue de cette course, le classement général de la coupe d’automne, basé sur les 6 meilleurs résultats de la saison, est le suivant : Circuit technique long : 1er Juerg Niggli (O’Jura), 2e Bruno Barge, 3e Beat Mueller. Circuit technique moyen : 1er Laurent Merat (O’Jura), 2e Jirden Lennart, 3e Daria Niggli. Circuit technique court : 1er Victor Kuznetsov (COLJ), 2e N...

  13. Orienteering club

    CERN Multimedia

    Club d'orientation

    2014-01-01

    Course d'orientation Finale de la coupe d’automne La dernière épreuve de la coupe d’automne organisée par le club s’est déroulée ce samedi 1er novembre avec une course type «one-man-relay» dans la forêt de Trelex (Vd). Les concurrents des circuits techniques devaient parcourir trois boucles et ceux des circuits «faciles» deux boucles, avec changements de carte. Le parcours technique long a été remporté par un membre du club, Berni Wehrle. A l’issue de cette course, le Président du club, L. Jirden annonçait le classement général de la coupe d’automne, basé sur les 6 meilleurs résultats de la saison : Circuit technique long : 1er Juerg Niggli (O’Jura), 2e Berni Wehrle, 3e Beat Mueller. Circuit technique moyen : 1er Laurent Merat (O&r...

  14. Orienteering club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    Course d'orientation Finale de la coupe genevoise Rapide et méthodique, voilà les qualités dont il fallait faire preuve pour remporter la dernière étape de la coupe organisée par le club du CERN dans les bois de Monteret. Il s’agissait d’une course au score où chaque concurrent disposait d’un temps imparti pour poinçonner le maximum de balises. Le parcours technique a été remporté par Tomas Shellman et le parcours facile par Victor Dannecker. Cette dernière étape était aussi décisive pour la désignation des lauréats de la coupe genevoise de printemps. Les résultats officiels étaient donnés par le président du club, L. Jirden : Circuit Technique Long : Berni Wehrle, Bruno Barge, Edvins Reisons Circuit Technique Moyen : J.-Bernard Zosso, ...

  15. Orienteering club

    CERN Multimedia

    Club d'orientation

    2010-01-01

    COURSE D’ORIENTATION  De La Rippe à Sauvabellin, la coupe genevoise continue ! Le rendez-vous était donné samedi 8 mai aux amateurs de course d’orientation dans les bois de La Rippe (Canton de Vaud). Cette 6e épreuve était organisée par le Club Satus Grutli de Genève. Il est dommage que les participants n’aient pas été aussi nombreux que lors des dernières courses, les Championnats de France des clubs à Dijon ayant certainement retenus plus d’un compétiteur. La première place est revenue à : – Technique long : Berni Wehrle – Technique moyen : Jean-Bernard Zosso – Technique court : Berni Wehrle – Facile moyen : Peter Troscanyi – Facile court : Claire Droz. Il ne restera plus que deux épreuves ...

  16. Orienteering Club

    CERN Multimedia

    Club d'orientation

    2012-01-01

    Finale de la coupe d’automne   La coupe d’automne organisée par le club d’orientation du CERN s’est terminée ce samedi 10 novembre avec une course sprint à Prévessins. C’était la 12e épreuve de la saison. En stage dans la région, Tanya Ryabkina, championne d’Europe en titre et médaillée de bronze en moyenne distance lors des championnats du monde à La Givrine cet été, a fait l’honneur de sa présence et termine 2e à 8 secondes de Trygve Buanes, norvégien du club de Bergen. A l’issue de cette dernière épreuve, le classement général de la coupe d’automne, basé sur les 8 meilleurs résultats de la saison, est ainsi le suivant : Circuit technique long : 1er Jurg Niggli (O&rsqu...

  17. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2012-01-01

    Course d'orientation Ces deux dernières semaines, le club a organisé la troisième puis la quatrième étape de la coupe de printemps, une dans la forêt de Collogny/Moissey près de Vulbens, l’autre vers le parcours vita de Trélex. Les résultats sont: Facile court Vulbens : 1er Léo Lonchampt, O’Jura (16:04), 2e Timothée Bazin (23:07), 3e Francesco Pieri (26:57) Trélex : 1er Noora Maurent (23:11), 2e Sarah Stuber, COLJ (26:51), 3e T. Bazin (28:17) Facile moyen Vulbens : 1er Victor Kuznetsov, CO CERN (25:36), 2e Didier Descourvières (28:03), 3e Konstantinos Haider, CO CERN (36:53) Trélex : 1er V. Kuznetsov, COLJ (38:01), 2e K. Haider, CO CERN (43:15), 3e ex aequo Olivia Nguyen et Sven Vietmeier (58:11) Technique court Vulbens : 1er Benoit Bazin (41:21), 2e Colas Gintzburger (55:12), 3e Nathan Freydoz (55:48) Trélex : 1...

  18. Orienteering club

    CERN Multimedia

    Club d'orientation

    2014-01-01

    Course d'orientation C’est sous un beau soleil samedi 4 octobre que s’est déroulée la 6e étape de la Coupe genevoise d’automne organisée par le club. Plus d’une centaine de concurrents provenant de 7 clubs de CO avaient fait le déplacement pour courir sur un des cinq parcours proposés dans les bois de Trélex-Génolier (VD). Le podium est le suivant : Technique long (5,9 km, 19 postes) : 1er Jurg Niggli, O’Jura (1:00:02); 2e Berni Wehrle, CO CERN (1:06:44); 3e Konrad Ehrbar, COLJ (1:07:08) Technique moyen (4,8 km, 18 postes) : 1er Christophe Vuitton, CO CERN (54:25); 2e J.B. Zosso, CO CERN (1:01:19); 3e Jeremy Wichoud, COLJ (1:06:21) Technique court (3,8 km, 14 postes) : 1er Julien Vuitton, CO CERN (36:19); 2e Vladimir Kuznetsov, COLJ (48:47); 3e Natalia Niggli, O’Jura (50:38) Facile moyen (3,2 km, 11 postes) : 1ère Alina Niggli, O&...

  19. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2015-01-01

    Course orientation Finale de la coupe genevoise La série des courses de printemps s’est achevée samedi dernier dans les bois de Bonmont (Vaud) avec une épreuve «one-man-relay» organisée par le club. Le vainqueur du parcours technique  long, Yann Locatelli (Club de Chambéry Savoie) a réalisé les deux boucles comportant 24 balises avec presque 6 minutes d’avance sur le second concurrent Domenico Lepori (Club CARE Vevey). Cette dernière étape était aussi décisive pour la désignation des lauréats de la coupe genevoise de printemps, en comptabilisant les 6 meilleurs résultats sur les 10 épreuves. Le podium officiel était donné par le président du club, L. Jirden, qui profitait de l’occasion pour remercier tous les participants et également tous les...

  20. Orienteering Club

    CERN Multimedia

    Club d'orientation

    2013-01-01

    De jour comme de nuit Les amateurs de course d’orientation ont pu s’en donner à cœur joie ce week-end puisqu’ils avaient la possibilité de courir sur deux épreuves en moins de 24 heures. En effet, le club du CERN organisait une course de nuit aux Evaux et la 7e étape de la coupe genevoise se tenait samedi après-midi dans les bois du Grand Jorat à Savigny. Les vainqueurs pour chaque course sont : Technique long CO de nuit: Julien Charlemagne, SOS Sallanches CO samedi: Philipp Khlebnikov, ANCO   Technique moyen CO de nuit: Céline Zosso, CO CERN CO samedi: Pavel Khlebnikov, ANCO Technique court CO de nuit: Colas Ginztburger, SOS Sallanches CO samedi: Victor Kuznetsov, COLJ Lausannne Facile moyen CO de nuit: Gaëtan Rickenbacher, CO CERN CO samedi: Tamas Szoke   Facile court CO de nuit:Oriane Rickenbacher, CO CERN CO samedi: Katya Kuznetsov...

  1. Orienteering Club

    CERN Document Server

    CLUB D'ORIENTATION

    2013-01-01

    Calendrier de la coupe d’automne Le Club d’orientation du CERN, en partenariat avec d’autres clubs de la région, vous propose, pour cette nouvelle coupe d’automne genevoise, une série de 10 courses. Le club du O’Jura donnera le coup d’envoi le samedi 31 août. Les courses s’enchaîneront selon le calendrier suivant : Samedi 31 août : Prémanon (39) - longue distance Samedi 14 septembre : La Faucille (01) - longue distance Samedi 21 septembre : Saint Cergue (VD) - longue distance Samedi 28 septembre : Ballens (VD) - relais Samedi 5 octobre : La Pile (VD) - longue distance Vendredi 11 octobre : Les Evaux (GE) - nocturne Samedi 12 octobre : Grand Jorat, Savigny (VD) - longue distance Samedi 19 octobre : Terrasses de Genève (74) - longue distance Samedi 26 octobre : Prémanon (39) - longue distance Samedi 2 novembre : Bois Tollot (GE) - score - Finale Les &a...

  2. Orienteering Club

    CERN Multimedia

    Club d'Orientation

    2011-01-01

    Course d'orientation Avec la CO en nocturne organisée par le club du CERN vendredi 14 octobre au stade des Eveaux (Ge), et la CO à Savigny (Vd) proposée par le club de Lausanne-Jorat le lendemain, les étapes de la coupe genevoise d’automne s’enchainent rapidement. Il ne reste plus que 3 rendez-vous pour boucler la saison. Les premières places devraient certainement se jouer entre des membres du club du CERN, du O’Jura ou de Lausanne-Jorat. La prochaine course du club est programmée pour samedi 22 octobre à Pomier, près de Cruseilles. L’accueil se fera à partir de 12h30 et les départs s’échelonneront de 13h à 15h. * * * * * * * Nouvelle belle victoire samedi 8 octobre à Saint Cergue du jeune finlandais Ville Keskisaari (COLJ) en 50:56 devant Jürg Niggli (O’Jura) en 1:03:32, et Alexandre...

  3. Orienteering Club

    CERN Document Server

    Club d'orientation

    2013-01-01

    Course d'orientation Le coup d’envoi de la coupe genevoise a été donné samedi 31 août dans les bois de Combe Froide à Prémanon. Plus de 150 coureurs avaient fait le déplacement. Les parcours facile court, facile moyen et technique court ont été remportés par des coureurs du club O’Jura - Ulysse Dannecker, Léo Lonchampt, Franck Lonchampt, le technique moyen par Pekka Marti du club Ol Biel Seeland et le technique long par Térence Risse du CA Rosé – également membre de l’équipe nationale suisse des moins de 20 ans. Pour le club du CERN, les meilleures résultats ont été obtenus pas Emese Szunyog sur technique court et Marie Vuitton sur technique moyen avec une 4e place. La prochaine course aura lieu samedi 14 septembre à La Faucille. Le club propose aussi...

  4. On the role of the grain size in the magnetic behavior of sintered permanent magnets

    Science.gov (United States)

    Efthimiadis, K. G.; Ntallis, N.

    2018-02-01

    In this work the finite elements method is used to simulate, by micromagnetic modeling, the magnetic behavior of sintered anisotropic magnets. Hysteresis loops were simulated for different grain sizes in an oriented multigrain sample. By keeping out other parameters that contribute to the magnetic microstructure, such as the sample size, the grain morphology and the grain boundaries mismatch, it has been found that the grain size affects the magnetic properties only if the grains are exchange-decoupled. In this case, as the grain size decreases, a decrease in the nucleation field of a reverse magnetic domain is observed and an increase in the coercive field due to the pinning of the magnetic domain walls at the grain boundaries.

  5. Alternative grains in nutrition

    Directory of Open Access Journals (Sweden)

    Jevcsák Sz.

    2016-12-01

    Full Text Available Many people suffer from gluten sensitivity or gluten intolerance. They have to avoid or limit their gluten intake. Sorghum and millet are gluten-free cereals, wherefore persons with gluten sensitivity or gluten intolerance could consume them. Moreover, they have a lot of positive effects due to their phenolic compounds as phenol acid or flavonoid. Antioxidant activity in sorghum is especially high in comparison with other cereals. Our aim was to compare literature data about the chemical compositions of sorghum and millet with other grains.

  6. Evolution of Interstellar Grains

    Science.gov (United States)

    Allamandola, Lou J.; DeVincenzi, Donald L. (Technical Monitor)

    1998-01-01

    During the past two decades observations combined with laboratory simulations, have revolutionized our understanding of interstellar ice and dust, the raw materials from which planets, comets and stars form. Most interstellar material is concentrated in large molecular clouds where simple molecules are formed by dust-grain and gas-phase reactions. Gaseous species striking the cold (10K) dust stick, forming an icy grain mantle. This accretion, coupled with UV photolysis, produces a complex chemical mixture containing volatile, non-volatile, and isotopically fractionated species. Ices in molecular clouds contain the very simple molecules H2O, CH3OH, CO, CO2, H2, and perhaps some NH3 and H2CO, as well as more complex species. The evidence for these compounds, as well as carbon-rich materials, will be reviewed and the possible connections with comets and meteorites will be presented in the first part of the talk . The second part of the presentation will focus on interstellar/precometary ice photochemical evolution and the species likely to be found in comets. The chemical composition and photochemical evolution of realistic interstellar/pre-cometary ice analogs will be discussed. Ultraviolet photolysis of these ices produces H2, H2CO, CO2, CO, CH4, HCO, and more complex molecules. When ices representative of interstellar grains and comets are exposed to UV radiation at low temperature a series of moderately complex organic molecules are formed in the ice including: CH3CH2OH (ethanol), HC(=O)NH2 (formamide), CH3C(=O)NH2 (acetamide), and R-C=N (nitriles). Several of these are already known to be in the interstellar medium, and their presence indicates the importance of grain processing. After warming to room temperature an organic residue remains. This is composed primarily of hexamethylenetetramine (HMT, C6H12N4), with lesser amounts of polyoxymethylene-related species (POMs), amides, and ketones. This is in sharp contrast to the organic residues produced by

  7. Validation of Reported Whole-Grain Intake from a Web-Based Dietary Record against Plasma Alkylresorcinol Concentrations in 8- to 11-Year-Olds Participating in a Randomized Controlled Trial

    DEFF Research Database (Denmark)

    Biltoft-Jensen, Anja Pia; Damsgaard, Camilla T.; W. Andersen, Elisabeth

    2016-01-01

    BACKGROUND: Whole-grain (WG) intake is important for human health, but accurate intake estimation is challenging. Use of a biomarker for WG intake provides a possible way to validate dietary assessment methods. OBJECTIVE: Our aim was to validate WG intake from 2 diets reported by children, using...... plasma alkylresorcinol (AR) concentrations, and to investigate the 3-mo reproducibility of AR concentrations and reported WG intake. METHODS: AR concentrations were analyzed in fasting blood plasma samples, and WG intake was estimated in a 7-d web-based diary by 750 participants aged 8-11 y in a 2 school...... meal × 3 mo crossover trial. Reported WG intake and plasma AR concentrations were compared when children ate their usual bread-based lunch (UBL) and when served a hot lunch meal (HLM). Correlations and cross-classification were used to rank subjects according to intake. The intraclass correlation...

  8. Photoinduced orientation in natural rubber

    Science.gov (United States)

    de Souza, Nara C.; Cavalheri, Adriana S.; Brito, Jackeline B.; Job, Aldo E.; Oliveira, Osvaldo N.; Giacometti, José A.; Silva, Josmary R.

    2012-04-01

    Azobenzene molecules and their derivatives have been widely investigated for their potential applications in optical and electrooptical devices. We have prepared a new guest-host system from natural rubber (NR) impregnated with azobenzene derivative Sudan Red B (SRB). The effects of stretching and immersion time on photoinduced orientation were investigated by birefringence signal measurements. We have found that the molecular orientation increase when the samples are stretched and decrease with the increase of immersion time. The first behavior was explained by using the random coil model and the latter was attributed to increase of the aggregation of SRB into NR matrix.

  9. Determining grain resolved stresses in polycrystalline materials using three-dimensional X-ray diffraction

    DEFF Research Database (Denmark)

    Oddershede, Jette; Schmidt, Søren; Poulsen, Henning Friis

    2010-01-01

    An algorithm is presented for characterization of the grain resolved (type II) stress states in a polycrystalline sample based on monochromatic X-ray diffraction data. The algorithm is a robust 12-parameter-per-grain fit of the centre-of-mass grain positions, orientations and stress tensors...... including error estimation and outlier rejection. The algorithm is validated by simulations and by two experiments on interstitial free steel. In the first experiment, using only a far-field detector and a rotation range of 2 × 110°, 96 grains in one layer were monitored during elastic loading and unloading....... Very consistent results were obtained, with mean resolutions for each grain of approximately 10 µm in position, 0.05° in orientation, and 8, 20 and 13 × 10-5 in the axial, normal and shear components of the strain, respectively. The corresponding mean deviations in stress are 30, 50 and 15 MPa...

  10. Grain Boundary Sliding in Deforming Wehrlite: Rheology and Microstructure

    Science.gov (United States)

    Zhao, N.; Hirth, G.; Cooper, R. F.; Kruckenberg, S. C.

    2016-12-01

    Elastic anisotropy of Earth's upper mantle used to be attributed exclusively to dislocation creep. However, recent experimental results suggest that crystallographic preferred orientation (CPO) in olivine, which contributes to elastic anisotropy, could also form during grain boundary sliding [e.g., 1-3]. Nevertheless, the fundamental problem of how CPO forms during grain boundary sliding is not fully understood. Our current efforts examine the grain-size-sensitive flow of wehrlite, to characterize the influence of the second phase (clinopyroxene) both on olivine CPO formation as well as the propensity of grain boundary sliding and accumulated strain to effect solid-state phase separation (i.e., metamorphic layering). Creep tests on fine-grain-size (2-5 µm) olivine and clinopyroxene aggregates (T =1100-1200ºC; P = 1.5 GPa; γ=3-7) have been conducted. These reveal strong type-B fabric for olivine. Characterization of effects of grain size, temperature and applied strain rate reveal the grain size dependence, stress exponent and activation energy of the flow kinetics of wehrlite. The stress exponent, which is similar to stress exponent for harzburgite reported by Sundberg & Cooper [1], and grain-size dependence suggest that the dominant deformation mechanism in our experiments may be grain boundary sliding. A large stress drop in early segments of experiments suggest an evolution of microstructure. The Fourier transform of backscatter images demonstrates that there exists a direction of foliation, defined by Ol-Cpx heterophase boundaries, which may be the key to understand the development of CPO formation. [1] Sundberg, M. & Cooper, R. F., J. Geophys. Res., 2008. [2] Miyazaki, T., Sueyoshi, K., and Hiraga, T., Nature, 2013. [3] Tielke, J. A., L. N. Hansen, M. Tasaka, C. Meyers, M. E. Zimmerman, and D. L. Kohlstedt, J. Geophys. Res., 2016.

  11. Grain morphology of YBCO coated superconductors prepared by spin process on Ni substrate

    Energy Technology Data Exchange (ETDEWEB)

    Liu, C.F.; Du, S.J.; Yan, G.; Xi, W.; Wu, X.; Pang, Y.; Wang, F.Y.; Liu, X.H.; Feng, Y.; Zhang, P.X.; Wu, X.Z.; Zhou, L

    2003-04-15

    The YBCO thick films with c-axis preferred orientation were prepared by spin and printing processes on Ni substrates (including cold rolling Ni, cube textured Ni, and cube textured Ni+self-oxided NiO). The results show that the chrysanthemum (or spherulite) and polygon morphology grains dominate the microstructure of YBCO films. The chrysanthemum size is about 0.2-0.5 mm range, some reaches 1 mm, and polygon grains normally are placed in the center of the chrysanthemum grains. No chrysanthemum grains appear in the thick films prepared on the substrate with Ag or YBCO intermediate layers.

  12. Grain boundary melting in ice

    OpenAIRE

    Thomson, E. S.; Hansen-Goos, Hendrik; Wilen, L. A.; Wettlaufer, J. S.

    2012-01-01

    We describe an optical scattering study of grain boundary premelting in water ice. Ubiquitous long ranged attractive polarization forces act to suppress grain boundary melting whereas repulsive forces originating in screened Coulomb interactions and classical colligative effects enhance it. The liquid enhancing effects can be manipulated by adding dopant ions to the system. For all measured grain boundaries this leads to increasing premelted film thickness with increasing electrolyte concentr...

  13. PESTICIDES USE AMONG GRAIN MERCHANTS IN MUBI GRAIN ...

    African Journals Online (AJOL)

    AGROSEARCH UIL

    ABSTRACT. Food security in sub-Saharan Africa largely depends upon improved food productivity through the use of sustainable agricultural practices and the reduction of post-harvest losses caused by pests and diseases. This study was conducted in two major grain markets in Mubi to study pest control practices by grain ...

  14. Grain-filling, chlorophyll content in relation with grain yield ...

    African Journals Online (AJOL)

    The beginning of active phase of grain filling corresponded to the beginning of the degradation of chlorophyll content. The velocity of grain filling was negatively correlated to the number of days to heading (DH). Changes in photosynthesis most closely paralleled changes in chlorophyll content. All these changes occurred ...

  15. Modelling of grain refinement driven by negative grain boundary energy

    Czech Academy of Sciences Publication Activity Database

    Fischer, F. D.; Zickler, G. A.; Svoboda, Jiří

    2017-01-01

    Roč. 97, č. 23 (2017), s. 1963-1977 ISSN 1478-6435 R&D Projects: GA ČR(CZ) GA15-06390S Institutional support: RVO:68081723 Keywords : grain refinement * grain nucleation * distribution concept * jump on distribution function Subject RIV: BJ - Thermodynamics Impact factor: 1.505, year: 2016

  16. Transitional grain-size-sensitive flow of milky quartz aggregates

    Science.gov (United States)

    Fukuda, J. I.; Holyoke, C. W., III; Kronenberg, A. K.

    2014-12-01

    Fine-grained (~15 μm) milky quartz aggregates exhibit reversible flow strengths in triaxial compression experiments conducted at T = 800-900oC, Pc = 1.5 GPa when strain rates are sequentially decreased (typically from 10-3.5 to 10-4.5 and 10-5.5 s-1), and then returned to the original rate (10-3.5 s-1), while samples that experience grain growth at 1000oC (to 35 μm) over the same sequence of strain rates exhibit an irreversible increase in strength. Polycrystalline quartz aggregates have been synthesized from natural milky quartz powders (ground to 5 μm) by HIP methods at T = 1000oC, Pc = 1.5 GPa and t = 24 hours, resulting in dense, fine-grained aggregates of uniform water content of ~4000 ppm (H/106Si), as indicated by a broad OH absorption band at 3400 cm-1. In experiments performed at 800o and 900oC, grain sizes of the samples are essentially constant over the duration of each experiment, though grain shapes change significantly, and undulatory extinction and deformation lamellae indicate that much of the sample shortening (to 50%) is accomplished, over the four strain-rate steps, by dislocation creep. Differential stresses measured at T = 800oC decrease from 160 to 30 MPa as strain rate is reduced from 10-4.6 to 10-5.5 s-1, and a stress of 140 MPa is measured when strain rate is returned to 10-4.5 s-1. Samples deformed at 1000o and 1100oC experience normal grain growth, with grain boundary energy-driven grain-coarsening textures superposed by undulatory extinction and deformation lamellae. Differential stresses measured at 1000oC and strain rates of 10-3.6, 10-4.6, and 10-5.5 s-1 are 185, 80, and 80 MPa, respectively, while an increased flow stress of 260 MPa is measured (following ~28 hours of prior high temperature deformation and grain growth) when strain rate is returned to 10-3.6 s-1. While all samples exhibit lattice preferred orientations, the stress exponent n inferred for the fine-grained 800oC sample is 1.5 and the stress exponent of the coarse-grained

  17. Evaluation of Rock Powdering Methods to Obtain Fine-grained Samples for CHEMIN, a Combined XRD/XRF Instrument

    Science.gov (United States)

    Chipera, S. J.; Vaniman, D. T.; Bish, D. L.; Sarrazin, P.; Feldman, S.; Blake, D. F.; Bearman, G.; Bar-Cohen, Y.

    2004-01-01

    A miniature XRD/XRF (X-ray diffraction / X-ray fluorescence) instrument, CHEMIN, is currently being developed for definitive mineralogic analysis of soils and rocks on Mars. One of the technical issues that must be addressed to enable remote XRD analysis is how best to obtain a representative sample powder for analysis. For powder XRD analyses, it is beneficial to have a fine-grained sample to reduce preferred orientation effects and to provide a statistically significant number of crystallites to the X-ray beam. Although a two-dimensional detector as used in the CHEMIN instrument will produce good results even with poorly prepared powder, the quality of the data will improve and the time required for data collection will be reduced if the sample is fine-grained and randomly oriented. A variety of methods have been proposed for XRD sample preparation. Chipera et al. presented grain size distributions and XRD results from powders generated with an Ultrasonic/Sonic Driller/Corer (USDC) currently being developed at JPL. The USDC was shown to be an effective instrument for sampling rock to produce powder suitable for XRD. In this paper, we compare powder prepared using the USDC with powder obtained with a miniaturized rock crusher developed at JPL and with powder obtained with a rotary tungsten carbide bit to powders obtained from a laboratory bench-scale Retsch mill (provides benchmark mineralogical data). These comparisons will allow assessment of the suitability of these methods for analysis by an XRD/XRF instrument such as CHEMIN.

  18. Grain Refinement of Freeform Fabricated Ti-6Al-4V Alloy Using Beam/Arc Modulation

    Science.gov (United States)

    Mitzner, Scott; Liu, Stephen; Domack, Marcia S.; Hafley, Robert A.

    2012-01-01

    Grain refinement can significantly improve the mechanical properties of freeform-fabricated Ti-6Al-4V alloy, promoting increased strength and enhanced isotropy compared with coarser grained material. Large beta-grains can lead to a segregated microstructure, in regard to both alpha-phase morphology and alpha-lath orientation. Beam modulation, which has been used in conventional fusion welding to promote grain refinement, is explored in this study for use in additive manufacturing processes including electron beam freeform fabrication (EBF(sup 3)) and gas-tungsten arc (GTA) deposition to alter solidification behavior and produce a refined microstructure. The dynamic molten pool size induced by beam modulation causes rapid heat flow variance and results in a more competitive grain growth environment, reducing grain size. Consequently, improved isotropy and strength can be achieved with relatively small adjustments to deposition parameters.

  19. Effect of grain defects on the mechanical behavior of nickel-based single crystal superalloy

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Haibin; Guo, Haiding [Nanjing Univ. of Aeronautics and Astronautics (China). Jiangsu Province Key Lab. of Aerospace Power System

    2017-03-15

    In this paper, a single crystal (SC) partition model, consisting of primary grains and grain defects, is proposed to simulate the weakening effect of grain defects generated at geometric discontinuities of SC materials. The plastic deformation of SC superalloy is described with the modified yield criterion, associated flow rule and hardening law. Then a bicrystal model containing only one group of misoriented grains under uniaxial loading is constructed and analyzed in the commercial finite element software ABAQUS. The simulation results indicate that the yield strength and elastic modulus of misoriented grains, which are determined by the crystallographic orientation, have a significant effect on the stress distribution of the bicrystal model. A critical stress, which is calculated by the stress state at critical regions, is proposed to evaluate the local stress rise at the sub-boundary of primary and misoriented grains.

  20. Detection and analysis of the stored grain insect creeping sound

    Science.gov (United States)

    Geng, Senlin; Zhang, Xiuqin; Zhao, Wei

    2017-09-01

    With the random acoustic source model as the theory model of the stored grain insects creeping, the sounds, of 20 Alphitobius diaperinus Panzer in wheat and 20 Tribolium castaneum Herbst adults in corn, are detected, respectively. By using Matlab, the original sound signals are reproduced and the de-noised signals are obtained. The power spectrums characteristics analysis are made. It is shown that the random acoustic source model is effective for the stored grain insect creeping sound detection, and their power spectrums are all discrete, where the highest frequency is 1600 Hz, the main frequency 205 Hz in the former, and the highest frequency is 800 Hz, the main frequency 350 Hz the latter, which may be used to distinguish different types insects in grain.

  1. The Antinutritional Components of Grains

    DEFF Research Database (Denmark)

    Madsen, Claus Krogh; Brinch-Pedersen, Henrik

    2016-01-01

    Grains provide humans and farmed animals with a very large proportion of the energy and macro- and micronutrients they need. Unfortunately, grains also contain compounds that interfere with the utilization of the nutrients by animals. These so-called antinutritionals may result in poor resource u...

  2. Locally available grains as carriers of Newcastle Disease V4 ...

    African Journals Online (AJOL)

    Laboratory trials were conducted to evaluate the potential of locally available grains as vehicles for the administration of the Australian Heat Resistant V4 vaccine. Feeds tested included millet, sunflower, crushed maize, rapoko, barley, sorghum and rice. One hundred and fifty four indigenous chickens were randomly divided ...

  3. Nutritive Value of Maize/Sorghum Brewers' Dried Grains ...

    African Journals Online (AJOL)

    A 28-day feeding trial involving 81 one-week-old Anak broilers was carried out in a completely randomized design experiment to investigate the nutritive value of maize/sorghum brewers' dried grain (MSBDG) supplemented with palm oil in broiler starter diets. The diets were formulated to contain 0% levels of MSBDG ...

  4. A Molecular Dynamics Approach to Grain Boundary Structure and Migration

    DEFF Research Database (Denmark)

    Cotterill, R. M. J.; Leffers, Torben; Lilholt, Hans

    1974-01-01

    It has been demonstrated that grain boundary formation from the melt can be simulated by the molecular dynamics method. The space between two mutually-misoriented crystal slabs was filled with atoms in a random manner and this liquid was then cooled until crystallization occurred. The general...

  5. Investigation of correlation analysis and relationships between grain ...

    African Journals Online (AJOL)

    A 3 x 3 factorial experiment in randomized complete block design (RCBD) format with three replications was conducted in the research field of the Azad University of Kermanshah, during 2006. The results showed that both sowing date and cultivar had significant effects on grain yield and yield components of chickpea.

  6. Gradient ultrafine-grained titanium: Computational study of mechanical and damage behavior

    DEFF Research Database (Denmark)

    Liu, Hongsheng; Mishnaevsky, Leon

    2014-01-01

    A computational model of ultrafine-grained (UFG) titanium with random and gradient distribution based on Voronoi tessellation and the composite model of nanomaterials is developed. The effect of grain size, non-equilibrium state of the grain boundary phase (characterized by the initial dislocation...... density and diffusion coefficient) and gradient of grain sizes on the mechanical behavior and damage initiation of the UFG titanium are studied in numerical experiments. Using computational experiments, the authors determined the likely damage criterion (dislocation-based model) and found several effects...... that can positively influence the mechanical response and strength of UFG titanium (homogeneity of grain sizes, dispersoids/precipitates in grain boundaries and initial dislocation density in grain boundaries). It is shown that the homogeneous structures of UFG titanium ensure higher yield stress and lower...

  7. Three-dimensional grain mapping by x-ray diffraction contrast tomography and the use of Friedel pairs in diffraction data analysis

    DEFF Research Database (Denmark)

    Ludwig, W.; Reischig, P.; King, A.

    2009-01-01

    X-ray diffraction contrast tomography (DCT) is a technique for mapping grain shape and orientation in plastically undeformed polycrystals. In this paper, we describe a modified DCT data acquisition strategy which permits the incorporation of an innovative Friedel pair method for analyzing diffrac...... a second phase can be precipitated at grain boundaries, thereby revealing the grain shapes. The simple changes introduced to the DCT methodology are equally applicable to other variants of grain mapping. ©2009 American Institute of Physics...

  8. Methods of assessing grain-size distribution during grain growth

    DEFF Research Database (Denmark)

    Tweed, Cherry J.; Hansen, Niels; Ralph, Brian

    1985-01-01

    This paper considers methods of obtaining grain-size distributions and ways of describing them. In order to collect statistically useful amounts of data, an automatic image analyzer is used, and the resulting data are subjected to a series of tests that evaluate the differences between two related...... distributions (before and after grain growth). The distributions are measured from two-dimensional sections, and both the data and the corresponding true three-dimensional grain-size distributions (obtained by stereological analysis) are collected. The techniques described here are illustrated by reference...

  9. Three-dimensional grain structure of sintered bulk strontium titanate from X-ray diffraction contrast tomography

    DEFF Research Database (Denmark)

    Syha, M.; Rheinheimer, W.; Bäurer, M.

    2012-01-01

    The three-dimensional grain boundary network of sintered bulk strontium titanate is reconstructed using X-ray diffraction contrast tomography, a non-destructive technique for determining the grain shape and crystallographic orientation in polycrystals that is ideally suited for detailed studies...

  10. Effect of planting date on growth and grain yield of fonio millet ...

    African Journals Online (AJOL)

    Seven planting times (from early July to mid August with 7-day interval) were laid out in a randomized complete block design. In general, plant growth and grain yield were significantly better for the early July sowing dates compared to other sowing dates. However, tillering capacity and grain size were not influenced by the ...

  11. MATHEMATICAL MODEL OF GRAIN MICRONIZATION

    Directory of Open Access Journals (Sweden)

    V. A. Afanas’ev

    2014-01-01

    Full Text Available Summary. During micronisation grain moisture evaporates mainly in decreasing drying rate period. Grain layer located on the surface of the conveyor micronisers will be regarded as horizontal plate. Due to the fact that the micronisation process the surface of the grain evaporates little moisture (within 2-7 % is assumed constant plate thickness. Because in the process of micronization grain structure is changing, in order to achieve an exact solution of the equations necessary to take into account changes thermophysical, optical and others. Equation of heat transfer is necessary to add a term that is responsible for the infrared heating. Because of the small thickness of the grain, neglecting the processes occurring at the edge of the grain, that is actually consider the problem of an infinite plate. To check the adequacy of the mathematical model of the process of micronisation of wheat grain moisture content must be comparable to the function of time, obtained by solving the system of equations with the measured experimental data of experience. Numerical solution of a system of equations for the period of decreasing drying rate is feasible with the help of the Maple 14, substituting the values of the constants in the system. Calculation of the average relative error does not exceed 7- 10 %, and shows a good agreement between the calculated data and the experimental values.

  12. Grain growth mechanism and magnetic properties in L10-FePt thin films

    Science.gov (United States)

    Li, W.; Chen, L.

    2017-08-01

    This paper focuses on the grain growth mechanisms and magnetic properties of FePt thin films during an annealing process. The grain size and grain orientation distribution have been quantitatively investigated by electron backscatter diffraction (EBSD), and the grain growth kinetics of thin films were described by the phenomenological kinetic grain growth model. The results show that the grain growth exponent and activation energy of the FePt thin films were 4.26 and 136 kJ/mol respectively, indicating that the grain growth mechanism is mainly controlled by the stochastic jumping of atoms crossing the grain boundaries. X-ray diffraction (XRD) results show that disorder-order transformation was concurrent with grain growth during the annealing process, slowing down the velocity of grain growth. The hysteresis loops reveal that the out-of-plane coercivity and squareness is enhanced with increasing annealing temperature and this can be attributed to the improvement of L10-ordered phase volume fraction and texture intensity.

  13. Grain mantles: The impact on grain evolution and selective extinction

    Science.gov (United States)

    Joseph, Charles L.

    1989-01-01

    Depletion studies are used to infer the presence of mantles and to constrain grain evolutionary models in the diffuse interstellar medium. The presence of these mantles appears to be important in the evolution of the grains inside diffuse as well as dense clouds. In dense clouds where the element-to-element abundances sometimes differ from those found in diffuse clouds, empirical relationships are starting to emerge between gas abundances and various types of peculiar selective extinction. These peculiar extinction curves may be the results of nonvolatile mantle formation on grain cores or may reflect chemical differences due to variations in the intrinsic metalicity from one cloud to another. A simple model of the time evolution of a parcel of gas and dust as observed by the depletion of two elements is presented. Different studies of grain evolution and selective extinction are discussed and compared.

  14. Effect of pre-existing crystallographic preferred orientation on the rheology of Carrara marble

    NARCIS (Netherlands)

    de Raadt, W.S.; Burlini, L.; Kunze, K.; Spiers, C.J.

    2014-01-01

    Abstract Localized deformation during high temperature plastic flow is frequently attributed to mechanical weakening caused by grain size reduction and, in some cases, by the development of a crystallographic preferred orientation (CPO). This study aims to investigate experimentally the contribution

  15. Properties of ultrasmall superconducting grains

    CERN Document Server

    Lorenzo, A D; Fazio, R; Giaquinta, G; Mastellone, A; Hekking, F W J

    1999-01-01

    We briefly review some properties of ultrasmall superconducting grains. The ground state and the first excited states of the grains are analyzed by studying the parity gap and the spectroscopic gap. Both quantities turn out to be parity dependent and universal functions of the ratio between the level spacing and the BCS gap, delta/DELTA. pairing correlations show up also in the thermodynamic quantities. The presence of a BCS interaction is responsible for an anomaly in the spin susceptibility as a function of temperature. This anomaly persists also in very small grains.

  16. Market orientation in the hospital industry.

    Science.gov (United States)

    Bhuian, S N; Abdul-Gader, A

    1997-01-01

    Using the more recent methodological developments in the assessment of the unidemensionality, reliability, and validity, the authors developed and examined a scale of market orientation for the hospital industry. The scale is based on a clear definition of the content of the construct of market orientation in the hospital industry. To this end, a national random sample of 237 hospital administrators was used. In addition to the support for the reliability and validity, the scale promises parsimony, pragmatism, and wide-ranging applicability.

  17. Red grain mycetoma foot in Western Rajasthan

    OpenAIRE

    Mathur D; Prakash Prabhu; Gupta P; Purohit Asha; Vyas MCR

    1994-01-01

    Usually the colour of the grains seen in cases of mycetoma are either black or yellow. Recently there were reports that unusual red grains had been noticed in cases of mycetoma. A case of red grain mycetoma is reported.

  18. Entrepreneurial orientation, market orientation, and competitive environment

    DEFF Research Database (Denmark)

    Sørensen, Hans Eibe; Cadogan, John W.

    This study sheds light on the role that the competitive environment plays in determining how elements of market orientation and elements of entrepreneurial orientation interact to influence business success. We develop a model in which we postulate that market orientation, entrepreneurial...... orientation, and competitive environment shape business performance via a three-way interaction. We test the model using primary data from the CEOs of 270 CEO of manufacturing firms, together with secondary data on these firms' profit performance. An assessment of the results indicates that customer...... orientations. Also, these moderating effects are stronger for firms operating in highly competitive environments. For the innovativeness component of entrepreneurship, however, the positive relationship between innovativeness and ROA decreases as the competitive environment becomes more hostile....

  19. Genetic Analysis of Grain Yield Related Traits in Rice

    Directory of Open Access Journals (Sweden)

    S. S. Zarbafi

    2015-03-01

    Full Text Available To determine gene action and heritability of grain yield related traits in rice, six rice varieties including Hashemi, Vandana, Kadous, Hassani, Shahpasand and IR36 were crossed in a diallel design in 2010. The parents and seeds of F1 generation (36 genotypes were grown in a completely randomized block design with three replications at the Research Field of the Rice Research Institute of Iran-Rasht in 2011. In this experiment, the yield related traits including grain yield, number of panicles per plant, number of spikelet’s per panicle, 1000-grain weight, plant height, panicle length and flag leaf area were measured in each experimental unit. Evaluation of the gene action based on the Hayman graphical method indicated that 1000-grain weight was controlled by partial dominance effect and the other attributes were controlled by complete dominance to over-dominance effects. Broad-sense heritability varied from 54.91% to 99.84% for flag leaf area and plant height, respectively and narrow-sense heritability ranged from 26.04% to 88.68% for panicle length and 1000-grain weight, respectively. Results of this research showed that the additive gene effect can be used to improve several traits including 1000-grain weight, but utilizing the heterosis phenomenon and hybrid production is recommended to improve the remaining traits in the studied population.

  20. Grain boundary melting in ice

    Science.gov (United States)

    Thomson, E. S.; Hansen-Goos, Hendrik; Wettlaufer, J. S.; Wilen, L. A.

    2013-03-01

    We describe an optical scattering study of grain boundary premelting in water ice. Ubiquitous long ranged attractive polarization forces act to suppress grain boundary melting whereas repulsive forces originating in screened Coulomb interactions and classical colligative effects enhance it. The liquid enhancing effects can be manipulated by adding dopant ions to the system. For all measured grain boundaries this leads to increasing premelted film thickness with increasing electrolyte concentration. Although we understand that the interfacial surface charge densities qs and solute concentrations can potentially dominate the film thickness, we cannot directly measure them within a given grain boundary. Therefore, as a framework for interpreting the data we consider two appropriate qs dependent limits; one is dominated by the colligative effect and other is dominated by electrostatic interactions.

  1. Grain, milling, and head rice yields as affected by nitrogen rate and bio-fertilizer application

    Directory of Open Access Journals (Sweden)

    Saeed FIROUZI

    2015-11-01

    Full Text Available To evaluate the effects of nitrogen rate and bio-fertilizer application on grain, milling, and head rice yields, a field experiment was conducted at Rice Research Station of Tonekabon, Iran, in 2013. The experimental design was a factorial treatment arrangement in a randomized complete block with three replicates. Factors were three N rates (0, 75, and 150 kg ha-1 and two bio-fertilizer applications (inoculation and uninoculation with Nitroxin, a liquid bio-fertilizer containing Azospirillum spp. and Azotobacter spp. bacteria. Analysis of variance showed that rice grain yield, panicle number per m2, grain number per panicle, flag leaves area, biological yield, grains N concentration and uptake, grain protein concentration, and head rice yield were significantly affected by N rate, while bio-fertilizer application had significant effect on rice grain yield, grain number per panicle, flag leaves area, biological yield, harvest index, grains N concentration and uptake, and grain protein concentration. Results showed that regardless of bio-fertilizer application, rice grain and biological yields were significantly increased as N application rate increased from 0 to 75 kg ha-1, but did not significantly increase at the higher N rate (150 kg ha-1. Grain yield was significantly increased following bio-fertilizer application when averaged across N rates. Grains N concentration and uptake were significantly increased as N rate increased up to 75 kg ha-1, but further increases in N rate had no significant effect on these traits. Bio-fertilizer application increased significantly grains N concentration and uptake, when averaged across N rates. Regardless of bio-fertilizer application, head rice yield was significantly increased from 56 % to 60 % when N rate increased from 0 to 150 kg ha-1. Therefore, this experiment illustrated that rice grain and head yields increased with increasing N rate, while bio-fertilizer application increased only rice grain

  2. Dense, finely, grained composite materials

    Science.gov (United States)

    Dunmead, Stephen D.; Holt, Joseph B.; Kingman, Donald D.; Munir, Zuhair A.

    1990-01-01

    Dense, finely grained composite materials comprising one or more ceramic phase or phase and one or more metallic and/or intermetallic phase or phases are produced by combustion synthesis. Spherical ceramic grains are homogeneously dispersed within the matrix. Methods are provided, which include the step of applying mechanical pressure during or immediately after ignition, by which the microstructures in the resulting composites can be controllably selected.

  3. Effect of Process Variables on the Grain Size and Crystallographic Texture of Hot-Dip Galvanized Coatings

    Science.gov (United States)

    Kaboli, Shirin; McDermid, Joseph R.

    2014-08-01

    A galvanizing simulator was used to determine the effect of galvanizing bath antimony (Sb) content, substrate surface roughness, and cooling rate on the microstructural development of metallic zinc coatings. Substrate surface roughness was varied through the use of relatively rough hot-rolled and relatively smooth bright-rolled steels, cooling rates were varied from 0.1 to 10 K/s, and bulk bath Sb levels were varied from 0 to 0.1 wt pct. In general, it was found that increasing bath Sb content resulted in coatings with a larger grain size and strongly promoted the development of coatings with the close-packed {0002} basal plane parallel to the substrate surface. Increasing substrate surface roughness tended to decrease the coating grain size and promoted a more random coating crystallographic texture, except in the case of the highest Sb content bath (0.1 wt pct Sb), where substrate roughness had no significant effect on grain size except at higher cooling rates (10 K/s). Increased cooling rates tended to decrease the coating grain size and promote the {0002} basal orientation. Calculations showed that increasing the bath Sb content from 0 to 0.1 wt pct Sb increased the dendrite tip growth velocity from 0.06 to 0.11 cm/s by decreasing the solid-liquid interface surface energy from 0.77 to 0.45 J/m2. Increased dendrite tip velocity only partially explains the formation of larger zinc grains at higher Sb levels. It was also found that the classic nucleation theory cannot completely explain the present experimental observations, particularly the effect of increasing the bath Sb, where the classical theory predicts increased nucleation and a finer grain size. In this case, the "poisoning" theory of nucleation sites by segregated Sb may provide a partial explanation. However, any analysis is greatly hampered by the lack of fundamental thermodynamic information such as partition coefficients and surface energies and by a lack of fundamental structural studies. Overall

  4. Carbonado revisited: Insights from neutron diffraction, high resolution orientation mapping and numerical simulations

    Science.gov (United States)

    Piazolo, Sandra; Kaminsky, Felix V.; Trimby, Patrick; Evans, Lynn; Luzin, V.

    2016-11-01

    One of the most controversial diamond types is carbonado, as its origin and geological history are still under debate. Here, we investigate selected carbonado samples using neutron diffraction and high resolution orientation mapping in combination with numerical simulations. Neutron diffraction analyses show that fine grained carbonado samples exhibit a distinct lack of crystallographic preferred orientation. Quantitative crystallographic orientation analyses performed on transmission electron microscope (TEM) sections reveal that the 2-10 μm grains exhibit locally significant internal deformation. Such features are consistent with crystal plastic deformation of a grain aggregate that initially formed by rapid nucleation, characterized by a high number of nucleation sites and no crystallographic preferred orientation. Crystal plastic deformation resulted in high stress heterogeneities close to grain boundaries, even at low bulk strains, inducing a high degree of lattice distortion without significant grain size reduction and the development of a crystallographic preferred orientation. Observed differences in the character of the grain boundary network and internal deformation structures can be explained by significant post-deformation annealing occurring to variable degrees in the carbonado samples. Differences in intensity of crystal bending and subgrain boundary sharpness can be explained by dislocation annihilation and rearrangement, respectively. During annealing grain energy is reduced resulting in distinct changes to the grain boundary geometry. Grain scale numerical modelling shows that anisotropic grain growth, where grain boundary energy is determined by the orientation of a boundary segment relative to the crystallographic orientation of adjacent grains results in straight boundary segments with abrupt changes in orientation even if the boundary is occurring between two triple junctions forming a ;zigzag; pattern. In addition, in diamond anisotropic

  5. The grain size(s) of Black Hills Quartzite deformed in the dislocation creep regime

    Science.gov (United States)

    Heilbronner, Renée; Kilian, Rüdiger

    2017-10-01

    General shear experiments on Black Hills Quartzite (BHQ) deformed in the dislocation creep regimes 1 to 3 have been previously analyzed using the CIP method (Heilbronner and Tullis, 2002, 2006). They are reexamined using the higher spatial and orientational resolution of EBSD. Criteria for coherent segmentations based on c-axis orientation and on full crystallographic orientations are determined. Texture domains of preferred c-axis orientation (Y and B domains) are extracted and analyzed separately. Subdomains are recognized, and their shape and size are related to the kinematic framework and the original grains in the BHQ. Grain size analysis is carried out for all samples, high- and low-strain samples, and separately for a number of texture domains. When comparing the results to the recrystallized quartz piezometer of Stipp and Tullis (2003), it is found that grain sizes are consistently larger for a given flow stress. It is therefore suggested that the recrystallized grain size also depends on texture, grain-scale deformation intensity, and the kinematic framework (of axial vs. general shear experiments).

  6. Cereal grains, legumes and diabetes.

    Science.gov (United States)

    Venn, B J; Mann, J I

    2004-11-01

    This review examines the evidence for the role of whole grain foods and legumes in the aetiology and management of diabetes. MedLine and SilverPlatter ('Nutrition' and 'Food Science FSTA') databases were searched to identify epidemiological and experimental studies relating to the effects of whole grain foods and legumes on indicators of carbohydrate metabolism. Epidemiological studies strongly support the suggestion that high intakes of whole grain foods protect against the development of type II diabetes mellitus (T2DM). People who consume approximately 3 servings per day of whole grain foods are less likely to develop T2DM than low consumers (grains of potential benefit to glycaemic control including slow release carbohydrate and a high fibre content. A substantial increase in dietary intake of legumes as replacement food for more rapidly digested carbohydrate might therefore be expected to improve glycaemic control and thus reduce incident diabetes. This is consistent with the results of dietary intervention studies that have found improvements in glycaemic control after increasing the dietary intake of whole grain foods, legumes, vegetables and fruit. The benefit has been attributed to an increase in soluble fibre intake. However, prospective studies have found that soluble fibre intake is not associated with a lower incidence of T2DM. On the contrary, it is cereal fibre that is largely insoluble that is associated with a reduced risk of developing T2DM. Despite this, the addition of wheat bran to the diets of diabetic people has not improved indicators of glycaemic control. These apparently contradictory findings might be explained by metabolic studies that have indicated improvement in glucose handling is associated with the intact structure of food. For both grains and legumes, fine grinding disrupts cell structures and renders starch more readily accessible for digestion. The extent to which the intact structure of grains and legumes or the composition of

  7. Localized modes in orientation-disordered uniaxial medium

    Energy Technology Data Exchange (ETDEWEB)

    Wan Zhenzhu; Han Yanling [School of Mathematics and Physics, China University of Geosciences, Wuhan 430074 (China); Wang Hong, E-mail: wanghong745@sohu.com, E-mail: w_pearl2008@163.com [Center of Information and Laboratory, China University of Geosciences, Wuhan 430074 (China)

    2011-02-01

    Using a 4x4 transfer matrix method, localized modes in orientation-disordered uniaxial medium have been investigated. We confirm that localized modes origin from the randomness of spatial orientation of optical axes. The misalignment of the optical axe provides the opportunity for a rearrangement of the localized modes. The number of localize mode also closely relative to the spatial orientation of optical axis. Numerical results indicate that it is possible to adjust the localized modes through altering the relative orientation of the optical axes of scatterers. This study is an importance for well understanding of localization of light wave and lasing action in anisotropic random media.

  8. Entrepreneurial Orientation and Internationalisation

    DEFF Research Database (Denmark)

    Decker, Arnim; Rollnik-Sadowska, Ewa; Servais, Per

    orientation as an attitude held by principals we investigate how entrepreneurial orientation affected the behaviour of these firms, specifically in terms of their internationalisation. Despite the fact that all firms have identical roots we find that entrepreneurial orientation held by their principals affect...

  9. Heterogeneous grain-scale response in ferroic polycrystals under electric field

    DEFF Research Database (Denmark)

    Daniels, John E.; Majkut, Marta; Cao, Qingua

    2016-01-01

    -ray diffraction (3D-XRD) is used to resolve the non-180° ferroelectric domain switching strain components of 191 grains from the bulk of a polycrystalline electro-ceramic that has undergone an electric-field-induced phase transformation. It is found that while the orientation of a given grain relative...... to the field direction has a significant influence on the phase and resultant domain texture, there are large deviations from the average behaviour at the grain scale. It is suggested that these deviations arise from local strain and electric field neighbourhoods being highly heterogeneous within the bulk...

  10. Observations of intergranular stress corrosion cracking in a grain-mapped polycrystal.

    Science.gov (United States)

    King, A; Johnson, G; Engelberg, D; Ludwig, W; Marrow, J

    2008-07-18

    Nondestructive three-dimensional mapping of grain shape, crystallographic orientation, and grain boundary geometry by diffraction contrast tomography (DCT) provides opportunities for the study of the interaction between intergranular stress corrosion cracking and microstructure. A stress corrosion crack was grown through a volume of sensitized austenitic stainless steel mapped with DCT and observed in situ by synchrotron tomography. Several sensitization-resistant crack-bridging boundaries were identified, and although they have special geometric properties, they are not the twin variant boundaries usually maximized during grain boundary engineering.

  11. Anisotropic grain growth and modification of 'frozen texture' in the lithospheric mantle

    Science.gov (United States)

    Boneh, Yuval; Wallis, David; Hansen, Lars; Krawczynski, Mike; Skemer, Philip

    2017-04-01

    Seismic anisotropy is widely observed in both the lithospheric and asthenospheric upper mantle, and is mainly caused by flow-induced alignment of anisotropic olivine crystals. Crystallographic preferred orientation (CPO) in the asthenosphere is thought to reflect the dynamics of current mantle flow. In contrast, the lithosphere is relatively viscous, and, it is assumed that texture in the lithosphere retains a memory of past flow (e.g., lithospheric mantle in an oceanic basin preserves texture that originated from corner flow at the mid-oceanic-ridge). Although the viscosity of the lithosphere is high in comparison to the asthenosphere, temperatures are high enough that non-deformational, microstructural processes may still be significant for texture evolution. Here we use an experimental approach to simulate a textured mantle annealed under high temperature, high pressure, and hydrostatic conditions, in order to investigate whether microstructural evolution due to static annealing could modify texture in the lithospheric mantle. Starting material for the experiments was a synthetic Fo50 olivine aggregate that was previously deformed in torsion (Hansen et al., 2016) to shear strains up to 10. The sample has a mean grain-size of 15 microns and a narrow, unimodal grain-size distribution, high dislocation-densities, and exhibits a strong A-type CPO. Sub-samples of the deformed specimen were annealed under hydrostatic conditions using a piston cylinder apparatus at T = 1250° C, P = 1 GPa for up to one week. After annealing, the samples were cut into thin sections and the crystal orientations were measured by electron backscatter diffraction (EBSD). The samples show clear evidence for abnormal grain growth due to annealing (with maximum grain sizes of 1 mm). The abnormally large grains grew at the expense of the smaller matrix grains, and grain-size distributions became distinctly bimodal. The small grains not consumed by abnormal grain growth have similar CPO strength

  12. Ultrasonic attenuation of polycrystalline materials with a distribution of grain sizes.

    Science.gov (United States)

    Arguelles, Andrea P; Turner, Joseph A

    2017-06-01

    Elastic wave scattering at grain boundaries in polycrystalline media can be quantified to determine microstructural properties. The amplitude drop observed for coherent wave propagation (attenuation) as well as diffuse-field scattering events have been extensively studied. In all cases, the scattering shows a clear dependence on grain size, grain shape, and microstructural texture. Models used to quantify scattering experiments are often developed assuming dependence on a single spatial length scale, usually, mean grain diameter. However, several microscopy studies suggest that most metals have a log normal distribution of grain sizes. In this study, grain size distribution is discussed within the context of previous attenuation models valid for arbitrary crystallite symmetries. Results are presented for titanium using a range of distribution means and widths assuming equiaxed grains and no preferred crystallographic orientation. The longitudinal and shear attenuations are shown to vary with respect to the frequency dependence for varying distribution widths even when the volumetric mean grain size is held constant. Furthermore, the results suggest that grain size estimates based on attenuation can have large errors if the distribution is neglected. This work is anticipated to play an important role in microstructural characterization research associated with ultrasonic scattering.

  13. Modeling of Austenite Grain Growth During Austenitization in a Low Alloy Steel

    Science.gov (United States)

    Dong, Dingqian; Chen, Fei; Cui, Zhenshan

    2016-01-01

    The main purpose of this work is to develop a pragmatic model to predict austenite grain growth in a nuclear reactor pressure vessel steel. Austenite grain growth kinetics has been investigated under different heating conditions, involving heating temperature, holding time, as well as heating rate. Based on the experimental results, the mathematical model was established by regression analysis. The model predictions present a good agreement with the experimental data. Meanwhile, grain boundary precipitates and pinning effects on grain growth were studied by transmission electron microscopy. It is found that with the increasing of the temperature, the second-phase particles tend to be dissolved and the pinning effects become smaller, which results in a rapid growth of certain large grains with favorable orientation. The results from this study provide the basis for the establishment of large-sized ingot heating specification for SA508-III steel.

  14. Phase field modeling of grain structure evolution during directional solidification of multi-crystalline silicon sheet

    Science.gov (United States)

    Lin, H. K.; Lan, C. W.

    2017-10-01

    Evolution of grain structures and grain boundaries (GBs), especially the coincident site lattice GBs, during directional solidification of multi-crystalline silicon sheet are simulated by using a phase field model for the first time. Since the coincident site lattice GBs having lower mobility, tend to follow their own crystallographic directions despite thermal gradients, the anisotropic energy and mobility of GBs are considered in the model. Three basic interactions of GBs during solidification are examined and they are consistent with experiments. The twinning process for new grain formation is further added in the simulation by considering twin nucleation. The effect of initial distribution of GB types and grain orientations is also investigated for the twinning frequency and the evolution of grain size and GB types.

  15. Unidirectionally Textured CaBi4Ti4O15 Ceramics by the Reactive Templated Grain Growth with an Extrusion

    Science.gov (United States)

    Takeuchi, Tsuguto; Tani, Toshihiko; Saito, Yasuyoshi

    2000-09-01

    Dense CaBi4Ti4O15 (CBT) ceramics with a unique texture were prepared by the reactive templated grain growth (RTGG) method using an extrusion technique. Plate-like Bi4Ti3O12 (BIT) particles, a reactive template for CBT, were mixed with other oxide and carbonate powders and unidirectionally aligned by extrusion. During sintering, oriented CBT grains were formed in situ topotaxially on the oriented BIT particles, and the templated grain growth and their densification eventually fabricated textured CBT ceramics. X-ray diffraction measurements and scanning electron microscopic observations revealed that the plate-like CBT grains were unidirectionally oriented parallel to the extruding direction without uniaxial alignment. Textured CBT ceramics poled in the extruding direction exhibited electromechanical coupling coefficients (k33) and piezoelectric coefficients (d33 and g33) more than two times as large as one of nontextured ceramics with the same composition.

  16. 3D reconstruction of prior β grains in friction stir-processed Ti-6Al-4V.

    Science.gov (United States)

    Tiley, J S; Shiveley, A R; Pilchak, A L; Shade, P A; Groeber, M A

    2014-08-01

    The prior β grain structure and orientations in the central stir zone of friction stir-processed Ti-6Al-4V were reconstructed from measured α phase orientations obtained by three-dimensional serial sectioning in a dual-beam focused ion beam scanning electron microscope. The data were processed to obtain the α colony and β grain size distributions in the volume. Several β grains were individually analysed to determine the total number of unique α variants and the respective volume fractions of each. The analysis revealed that some grains experienced overwhelming variant selection (i.e. one variant dominated) whereas other β grains contained a more evenly distributed mixture of all 12 variants. Published 2014. This article is a U.S. Government work and is in the public domain in the USA.

  17. Measurement of grain boundary triple line energy in copper

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, B. [Institut fuer Metallkunde und Metallphysik, RWTH Aachen University, 52056 Aachen (Germany); Verhasselt, J.Ch. [Sparing Roehl Henseler, Rethelstr. 123, 40237 Duesseldorf (Germany); Shvindlerman, L.S. [Institut fuer Metallkunde und Metallphysik, RWTH Aachen University, 52056 Aachen (Germany)] [Institute of Solid State Physics, Russian Academy of Sciences, Chernogolovka, Moscow District 142432 (Russian Federation)] [State Technological University, Moscow Institute of Steel and Alloys (Russian Federation); Gottstein, G., E-mail: Gottstein@imm.rwth-aachen.de [Institut fuer Metallkunde und Metallphysik, RWTH Aachen University, 52056 Aachen (Germany)

    2010-10-15

    Recent studies have demonstrated that grain boundary triple junctions are crystal defects with specific thermodynamic and kinetic properties. In this study we address the energy of triple lines. Previously, a geometrical model was proposed to determine the grain boundary line tension. The current study introduces a thermodynamically correct approach which allows direct and precise measurement of the triple line energy. The experimental technique utilizes the measurement of the surface topography of a crystal in the vicinity of a triple junction by atomic force microscopy. The grain boundary triple line tension {gamma}{sub TP}{sup l} of a random triple line in a copper tricrystal was measured to be 6.3 {+-} 2.8 x 10{sup -9} J m{sup -1}.

  18. Spinodal decomposition in fine grained materials

    Indian Academy of Sciences (India)

    Unknown

    A-rich grain boundary layer followed by a B-rich layer; the grain interior exhibits a spinodally decomposed microstructure, evolving slowly. Further, grain growth is suppressed completely during the decomposition process. Keywords. Spinodal decomposition; grain boundary effects; phase field models. 1. Introduction.

  19. Understanding political market orientation

    DEFF Research Database (Denmark)

    Ormrod, Robert P.; Henneberg, Stephan C.

    This article develops a conceptual framework and measurement model of political market orientation that consists of attitudinal and behavioural constructs. The article reports on perceived relationships among different behavioral aspects of political market orientation and the attitudinal...... influences of such behavior. The study includes structural equation modeling to investigate several propositions. While the results show that political parties need to focus on several different aspects of market-oriented behavior, especially using an internal and external orientation as cultural antecedents......, a more surprising result is the inconclusive effect of a voter orientation on market-oriented behaviours. The article discusses the findings in the context of the existing literature in political marketing and commercial market orientation....

  20. Summary Time Oriented Record (STOR)

    Science.gov (United States)

    O'Keefe, Q.E. Whiting; Simborg, Donald W.

    1980-01-01

    STOR is a computerized three component, time-oriented, summary, medical record designed to partially replace the traditional paper chart in the outpatient clinics at the University of California San Francisco. Information from at least four distributed databases functioning independently is brought together in a single paper document. Informationally, STOR is prioritized, displays inter-problem and chronological relationships, provides a high degree of physician control over the display and provides a great deal of information with little manual physician effort. Besides the usual issues of cost, impact, and acceptance, the evaluation will address the question of the informational competence of STOR in two single blind randomized controlled trials.

  1. Direct observation of grain boundary migration during recrystallization within the bulk of a moderately deformed aluminium single crystal

    DEFF Research Database (Denmark)

    Van Boxel, Steven; Schmidt, Søren; Ludwig, Wolfgang

    2014-01-01

    A single grain growing in the bulk of a mildly deformed (30% thickness reduction through cold rolling) aluminium single crystal with an {001}<100> orientation (Cube orientation), is monitored during recrystallization with synchrotron radiation using topo-tomography. The formation and migration of...... of the analyzed facets is not closely related to any crystallographic {111} plane of neither the growing grain nor the disappearing deformed matrix. © 2013 The Japan Institute of Metals and Materials.......A single grain growing in the bulk of a mildly deformed (30% thickness reduction through cold rolling) aluminium single crystal with an {001} orientation (Cube orientation), is monitored during recrystallization with synchrotron radiation using topo-tomography. The formation and migration...

  2. Sticking properties of ice grains

    Science.gov (United States)

    Jongmanns, M.; Kumm, M.; Wurm, G.; Wolf, D. E.; Teiser, J.

    2017-06-01

    We study the size dependence of pull-off forces of water ice in laboratory experiments and numerical simulations. To determine the pull-off force in our laboratory experiments, we use a liquid nitrogen cooled centrifuge. Depending on its rotation frequency, spherical ice grains detach due to the centrifugal force which is related to the adhesive properties. Numerical simulations are conducted by means of molecular dynamics simulations of hexagonal ice using a standard coarse-grained water potential. The pull-off force of a single contact between two spherical ice grains is measured due to strain controlled simulations. Both, the experimental study and the simulations reveal a dependence between the pull-off force and the (reduced) particle radii, which differ significantly from the linear dependence of common contact theories.

  3. Sticking properties of ice grains

    Directory of Open Access Journals (Sweden)

    Jongmanns M.

    2017-01-01

    Full Text Available We study the size dependence of pull-off forces of water ice in laboratory experiments and numerical simulations. To determine the pull-off force in our laboratory experiments, we use a liquid nitrogen cooled centrifuge. Depending on its rotation frequency, spherical ice grains detach due to the centrifugal force which is related to the adhesive properties. Numerical simulations are conducted by means of molecular dynamics simulations of hexagonal ice using a standard coarse-grained water potential. The pull-off force of a single contact between two spherical ice grains is measured due to strain controlled simulations. Both, the experimental study and the simulations reveal a dependence between the pull-off force and the (reduced particle radii, which differ significantly from the linear dependence of common contact theories.

  4. Pesticides Use among Grain Merchants in Mubi Grain Markets of ...

    African Journals Online (AJOL)

    It is, therefore, recommended that farmers, retailers, distributors and all the pesticide workers should undergo regular training/workshop on the use and safety measures of pesticides. Also multimedia awareness activities in local language should be massively conducted. Key words: Pesticides, food security, grain merchants ...

  5. Why Is It Important to Eat Grains, Especially Whole Grains?

    Science.gov (United States)

    ... and folate), and minerals ( iron , magnesium , and selenium). Dietary fiber from whole grains or other foods, may help reduce blood cholesterol levels and may lower risk of heart disease, obesity, and type 2 diabetes. Fiber is important for proper bowel function. It ...

  6. Stochastic charging of dust grains in protoplanetary disks

    Science.gov (United States)

    Sharmin Ashrafi, Khandaker; Esparza, Samuel; Xiang, Chuchu; Matthews, Lorin; Carballido, Augusto; Hyde, Truell

    2017-06-01

    Micron-sized dust grains are abundant in the early stages of protoplanetary disks. Not only do such solid particles provide the seeds for planetesimal formation through collisional growth and collective effects, they also modify the overall ionization levels of the surrounding plasma through the accumulation of charge. If the local dust density is large enough that charge is removed from the nebular gas through deposition on grain surfaces, magnetic fields can detach from the gas making the MRI process inoperative. For highly porous dust aggregates, MRI quenching can become even more efficient since porous aggregates accumulate charge more efficiently than do compact spherical grains having the same mass. The primary goal of this work is to develop a numerical model of dust coagulation and charging in a magnetized protoplanetary disk to answer the question: What role does the porosity and/or electrical charge state of dust aggregates play in the magnetohydrodynamic (MHD) structure of protoplanetary disks? The collisional charging of a grain is affected by its surface area and morphology. Here we compare the electron and ion currents incident on micron and submicron aggregate grains made of spherical monomers to the currents incident on spherical grains of equivalent mass. The electrons and ions are absorbed on the dust grain surface at random times; as a result charge fluctuates stochastically. We calculate the average charge and charge probability distribution for (i) aggregates composed of monomers of 10 nm, 20 nm and 50 nm monomers with an effective aggregate radius of 0.1 m, and (ii) aggregates consisting of up to 100 monomers with monomer radius of 0.1 micron. The implications of our results for non-ideal magnetohydrodynamics in protoplanetary disks are briefly discussed in terms of the effect of disk ionization fraction and chemical networks.

  7. Semiconductor monolayer assemblies with oriented crystal faces

    KAUST Repository

    Ma, Guijun

    2012-01-01

    Fabrication of two-dimensional monolayers of crystalline oxide and oxynitride particles was attempted on glass plate substrates. X-Ray diffraction patterns of the assemblies show only specific crystal facets, indicative of the uniform orientation of the particles on the substrate. The selectivity afforded by this immobilization technique enables the organization of randomly distributed polycrystalline powders in a controlled manner.

  8. Orientation correlations in aluminium deformed by ECAE

    DEFF Research Database (Denmark)

    Bowen, Jacob R.; Mishin, Oleg; Prangnell, P.B.

    2002-01-01

    Distributions of boundary misorientations measured in an Al–0.13%Mg alloy, processed by equal channel angular extrusion to a von Mises effective strain of 10, have been compared to misorientation distributions generated from a random mix of orientations present in the microstructure. A significan...

  9. Oil and Protein Accumulation in Soybean Grains under Salinity Stress

    Directory of Open Access Journals (Sweden)

    Kazem GHASSEMI-GOLEZANI

    2010-06-01

    Full Text Available Two factorial experiments based on randomized complete block design (RCBD with three replications were conducted in 2007 and 2008, to evaluate grain development (four harvests and rate and duration of oil and protein accumulation in three soybean cultivars (Williams, Zan and L17 under a non-saline (control and three saline (3, 6 and 9 ds/m NaCl conditions. Six seeds were sown in each pot filled with 900 g perlite, using 144 pots for each experiment. After emergence, seedlings were thinned and 4 plants were kept in each pot. Rate of oil accumulation up to maturity was not significantly affected by salinity. With increasing salinity, rate and percentage of protein accumulation, duration of oil and protein accumulation and oil and protein content per grain decreased, but oil percentage increased. Oil and protein yields per plant decreased as salinity increased. These reductions were mainly attributed to the short duration of protein and oil accumulation and grain yield per plant under saline conditions. Williams had the highest rate and duration of protein accumulation and rate of oil accumulation, but L17 had the highest grain yield per plant. Consequently, differences in protein and oil yields per plant between these two cultivars were not statistically significant. However, Zan had the lowest protein and oil yields, due to the lowest grain yield per plant.

  10. Oil and Protein Accumulation in Soybean Grains under Salinity Stress

    Directory of Open Access Journals (Sweden)

    Kazem GHASSEMI-GOLEZANI

    2010-06-01

    Full Text Available Two factorial experiments based on randomized complete block design (RCBD with three replications were conducted in 2007 and 2008, to evaluate grain development (four harvests and rate and duration of oil and protein accumulation in three soybean cultivars (�Williams�, �Zan� and �L17� under a non-saline (control and three saline (3, 6 and 9 ds/m NaCl conditions. Six seeds were sown in each pot filled with 900 g perlite, using 144 pots for each experiment. After emergence, seedlings were thinned and 4 plants were kept in each pot. Rate of oil accumulation up to maturity was not significantly affected by salinity. With increasing salinity, rate and percentage of protein accumulation, duration of oil and protein accumulation and oil and protein content per grain decreased, but oil percentage increased. Oil and protein yields per plant decreased as salinity increased. These reductions were mainly attributed to the short duration of protein and oil accumulation and grain yield per plant under saline conditions. �Williams� had the highest rate and duration of protein accumulation and rate of oil accumulation, but �L17� had the highest grain yield per plant. Consequently, differences in protein and oil yields per plant between these two cultivars were not statistically significant. However, �Zan� had the lowest protein and oil yields, due to the lowest grain yield per plant.

  11. Correlation between crystallographic orientation and surface faceting in UO 2

    Energy Technology Data Exchange (ETDEWEB)

    Miao, Yinbin; Mo, Kun; Yao, Tiankai; Lian, Jie; Fortner, Jeffrey; Jamison, Laura; Xu, Ruqing; Yacout, Abdellatif M.

    2016-09-01

    Here coordinated experimental efforts to quantitatively correlate crystallographic orientation and surface faceting features in UO2 are reported upon. A sintered polycrystalline UO2 sample was thermally etched to induce the formation of surface faceting features. Synchrotron Laue microdiffraction was used to obtain a precise crystallographic orientation map for the UO2 surface grains. Scanning electron microscopy (SEM) was utilized to collect the detailed information on the surface morphology of the sample. The surface faceting features were found to be highly dependent on the crystallographic orientation. In most cases, Triple-plane structures containing one {100} plane and two {111} planes were found to dominate the surface of UO2. The orientation-faceting relationship established in this study revealed a practical and efficient method of determining crystallographic orientation based on the surface features captured by SEM images.

  12. 75 FR 81965 - Grain Inspection Advisory Committee Reestablishment

    Science.gov (United States)

    2010-12-29

    ... Grain Inspection, Packers and Stockyards Administration Grain Inspection Advisory Committee Reestablishment AGENCY: Grain Inspection, Packers and Stockyards Administration, USDA. ACTION: Notice to... Grain Inspection, Packers and Stockyards Administration (GIPSA) Grain Inspection Advisory Committee...

  13. Correlation of the crystal orientation and electrical properties of silicon thin films on glass crystallized by line focus diode laser

    Energy Technology Data Exchange (ETDEWEB)

    Yun, J., E-mail: j.yun@unsw.edu.au [School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, NSW 2052 (Australia); Huang, J.; Teal, A. [School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, NSW 2052 (Australia); Kim, K. [School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, NSW 2052 (Australia); Suntech R& D Australia, Botany, NSW 2019 (Australia); Varlamov, S.; Green, M.A. [School of Photovoltaic and Renewable Energy Engineering, University of New South Wales, Sydney, NSW 2052 (Australia)

    2016-06-30

    In this work, crystallographic orientation of polycrystalline silicon films on glass formed by continuous wave diode laser crystallization was studied. Most of the grain boundaries were coincidence lattice Σ3 twin boundaries and other types of boundaries such as, Σ6, Σ9, and Σ21 were also frequently observed. The highest photoluminescence signal and mobility were observed for a grain with (100) orientation in the normal direction. X-ray diffraction results showed the highest occupancies between 41 and 70% along the (110) orientation. However, the highest occupancies changed to (100) orientation when a 100 nm thick SiO{sub x} capping layer was applied. Suns-Voc measurement and photoluminescence showed that higher solar cell performance is obtained from the cell crystallized with the capping layer, which is suspected from increased occupancies of (100) orientation. - Highlights: • Linear grains parallel to the scan direction formed with high density. • Σ3 coincidence lattice (CSL) boundaries found inside a grainGrain boundaries exhibit various CSL boundaries such as Σ9, Σ18, and Σ27. • Grain with < 100 > orientation in normal direction showed highest electrical properties. • Improved voltage observed when percentage of < 100 > normal orientation is increased.

  14. NUTRITIONAL CHARACTERIZATION OF GRAIN AMARANTH ...

    African Journals Online (AJOL)

    IBUKUN

    season. With a toasted flavor similar to popcorn when cooked, amaranth seeds are small in size but a good source of carbohydrate and protein (15-17 percent by weight). It is rich in the amino acids methionine, cycteine and has the highest content of lysine compared with all grains. It also has three times the fiber of wheat.

  15. Reaction-induced grain boundary cracking and anisotropic fluid flow during prograde devolatilization reactions within subduction zones

    Science.gov (United States)

    Okamoto, Atsushi; Shimizu, Hiroyuki; Fukuda, Jun-ichi; Muto, Jun; Okudaira, Takamoto

    2017-09-01

    Devolatilization reactions during prograde metamorphism are a key control on the fluid distribution within subduction zones. Garnets in Mn-rich quartz schist within the Sanbagawa metamorphic belt of Japan are characterized by skeletal structures containing abundant quartz inclusions. Each quartz inclusion was angular-shaped, and showed random crystallographic orientations, suggesting that these quartz inclusions were trapped via grain boundary cracking during garnet growth. Such skeletal garnet within the quartz schist formed related to decarbonation reactions with a positive total volume change (Δ V t > 0), whereas the euhedral garnet within the pelitic schists formed as a result of dehydration reaction with negative Δ V t values. Coupled hydrological-chemical-mechanical processes during metamorphic devolatilization reactions were investigated by a distinct element method (DEM) numerical simulation on a foliated rock that contained reactive minerals and non-reactive matrix minerals. Negative Δ V t reactions cause a decrease in fluid pressure and do not produce fractures within the matrix. In contrast, a fluid pressure increase by positive Δ V t reactions results in hydrofracturing of the matrix. This fracturing preferentially occurs along grain boundaries and causes episodic fluid pulses associated with the development of the fracture network. The precipitation of garnet within grain boundary fractures could explain the formation of the skeletal garnet. Our DEM model also suggests a strong influence of reaction-induced fracturing on anisotropic fluid flow, meaning that dominant fluid flow directions could easily change in response to changes in stress configuration and the magnitude of differential stress during prograde metamorphism within a subduction zone.

  16. Concepts on Low Temperature Mechanical Grain Growth

    Energy Technology Data Exchange (ETDEWEB)

    Sharon, John Anthony [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Metallurgy and Materials Joining Dept.; Boyce, Brad Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Metallurgy and Materials Joining Dept.

    2013-11-01

    In metals, as grain size is reduced below 100nm, conventional dislocation plasticity is suppressed resulting in improvements in strength, hardness, and wears resistance. Existing and emerging components use fine grained metals for these beneficial attributes. However, these benefits can be lost in service if the grains undergo growth during the component’s lifespan. While grain growth is traditionally viewed as a purely thermal process that requires elevated temperature exposure, recent evidence shows that some metals, especially those with nanocrystalline grain structure, can undergo grain growth even at room temperature or below due to mechanical loading. This report has been assembled to survey the key concepts regarding how mechanical loads can drive grain coarsening at room temperature and below. Topics outlined include the atomic level mechanisms that facilitate grain growth, grain boundary mobility, and the impact of boundary structure, loading scheme, and temperature.

  17. The Effect of Feeding Sorghum-Barley Brewer's Spent Grain (Sbbsg ...

    African Journals Online (AJOL)

    The objective of the study was to establish if inclusion of Sorghum-Barley Brewer's Spent Grain (SBBSG) in laying hen diets will affect laying performance and egg quality. A total of 300 Bovan Brown laying hens (37 weeks old) were randomly allocated in a completely randomized design, to five dietary treatments, T1, T2, T3, ...

  18. Grain refinement mechanism in an Al-Si-Mg alloy with scandium

    Energy Technology Data Exchange (ETDEWEB)

    Patakham, Ussadawut [Department of Production Engineering, Faculty of Engineering, King Mongkut' s University of Technology Thonburi, 126 Pracha-Utid Rd., Bangmod, Tungkhru, Bangkok 10140 (Thailand); Kajornchaiyakul, Julathep [National Metal and Material Technology Center, National Science and Technology Development Agency, 114 Thailand Science Park, Klong Nueng, Klong Luang, Pathumthani 12120 (Thailand); Limmaneevichitr, Chaowalit, E-mail: chaowalit.lim@kmutt.ac.th [Department of Production Engineering, Faculty of Engineering, King Mongkut' s University of Technology Thonburi, 126 Pracha-Utid Rd., Bangmod, Tungkhru, Bangkok 10140 (Thailand)

    2012-11-25

    Highlights: Black-Right-Pointing-Pointer Scandium can be used to refine aluminum grains in an Al-Si-Mg aluminum alloy. Black-Right-Pointing-Pointer The effectiveness of Sc is lower than that of conventional Al-Ti grain refiners. Black-Right-Pointing-Pointer Al{sub 3}Sc particles can act as heterogeneous nuclei of aluminum phases. Black-Right-Pointing-Pointer Higher alloying elements cause more intermetallic compound phases. Black-Right-Pointing-Pointer Those phases cannot effectively act as heterogeneous nuclei compared with Al{sub 3}Sc particles. - Abstract: Grain refinement of the primary aluminum ({alpha}-Al) phase in a hypoeutectic Al-Si alloy using scandium (Sc) was studied to identify the grain refinement mechanism. Optical microscopy (OM), Scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS) and electron backscatter diffraction (EBSD) techniques were extensively used in this study. We found that Sc refined grains of primary aluminum. However, the grain refinement efficiency of Sc was considerably lower than that of titanium (Ti) in the Al-Si-Mg foundry alloy. It was evident that the precipitated Sc-containing phases acted as heterogeneous nucleation sites for the primary aluminum phase. The Sc-containing heterogeneous sites are irregular in shape with sizes between 3 and 5 {mu}m. At least three groups of nuclei based on their chemical composition were found, i.e., (i) Al and Sc, (ii) Al, Si, Mg, and Sc, and (iii) Al, Si, Mg, Sc, and Fe. Crystal orientation mapping showed primary aluminum dendrites with one orientation in each grain near Al{sub 3}Sc particles. The grain refinement mechanism of Sc for aluminum relies on heterogeneous nucleation of Al{sub 3}Sc particles, with less responsibly for grain growth restriction. Many intermetallic phases with Al, Si, Fe, Mg and Sc as their major components were found, and these phases could not effectively act as heterogeneous nuclei.

  19. Grain growth kinetics of textured-BaTiO3 ceramics

    Indian Academy of Sciences (India)

    Both consumption of matrix by templates and grain growth of templates determined the orientation degree of ceramics. ... Luoyang Institute of Science and Technology, Luoyang 471023, China; Functional Materials Research Laboratory, Tongji University, Shanghai 200092, China; Department of Physics and Materials ...

  20. Grain centre mapping - 3DXRD measurements of average grain characteristics

    DEFF Research Database (Denmark)

    Oddershede, Jette; Schmidt, Søren; Lyckegaard, Allan

    2014-01-01

    Three-Dimensional X-ray Diraction (3DXRD) Microscopy is a generic term covering a variety of dierent techniques for characterising the mi- crostructure within the bulk of polycrystalline materials. One strategy | namely grain centre mapping | enables fast measurements of the av- erage characteris......Three-Dimensional X-ray Diraction (3DXRD) Microscopy is a generic term covering a variety of dierent techniques for characterising the mi- crostructure within the bulk of polycrystalline materials. One strategy | namely grain centre mapping | enables fast measurements of the av- erage...... and the closely related boxscan method is given. Both validation experiments and applications for in situ studies of microstructural changes during plastic deformation and crack growth are given. Finally an outlook with special emphasis on coupling the measured results with modelling is given....

  1. Movement of the cambial domain pattern and mechanism of formation of interlocked grain in Platanus

    Directory of Open Access Journals (Sweden)

    J. Krawczyszyn

    2015-01-01

    Full Text Available The orientation of splitting and uniting of rays, which served as an indicator of the orientation of morphogenic events occurring in cambium, was determined on series of veneers covering large tangential faces of Platanus trunks. It has been shown that cambium consists of orientational domains of Z- and S-type. They are perpendicular to, or slightly inclined with respect to, the trunk axis. Axial dimensions of domains are 8-28 cm. They move upward along the trunk, at a rate 6,5—12 mm, per radial mm of xylem porduced. Migration domain patterns are responsible for the formation of the interlocked grain.

  2. Investigation of Parent Austenite Grains from Martensite Structure Using EBSD in a Wear Resistant Steel.

    Science.gov (United States)

    Gyhlesten Back, Jessica; Engberg, Göran

    2017-04-26

    Crystallographic reconstruction of parent austenite grain boundaries from the martensitic microstructure in a wear resistant steel was carried out using electron backscattered diffraction (EBSD). The present study mainly aims to investigate the parent austenite grains from the martensitic structure in an as-rolled (reference) steel sample and samples obtained by quenching at different cooling rates with corresponding dilatometry. Subsequently, this study is to correlate the nearest cooling rate by the dilatometer which yields a similar orientation relationship and substructure as the reference sample. The Kurdjumov-Sachs orientation relationship was used to reconstruct the parent austenite grain boundaries from the martensite boundaries in both reference and dilatometric samples using EBSD crystallographic data. The parent austenite grain boundaries were successfully evaluated from the EBSD data and the corresponding grain sizes were measured. The parent austenite grain boundaries of the reference sample match the sample quenched at 100 °C/s (CR100). Also the martensite substructures and crystallographic textures are similar in these two samples. The results from hardness measurements show that the reference sample exhibits higher hardness than the CR100 sample due to the presence of carbides in the reference sample.

  3. In situ measurements of X-ray peak profile asymmetry from individual grains

    DEFF Research Database (Denmark)

    Wejdemann, Christian; Lienert, U.; Pantleon, Wolfgang

    2010-01-01

    Two copper samples, pre-deformed in tension to 5% plastic strain, are subjected to an in situ tensile deformation of 1% plastic strain while X-ray peak profiles from individual bulk grains are obtained. One sample is oriented with the in situ tensile axis parallel to the pre-deformation axis......, and peak profiles are obtained with the scattering vector parallel to this direction. The profiles show the expected asymmetry explained by the composite model as caused by intra-grain stresses. The other sample is oriented with the in situ tensile axis perpendicular to the pre-deformation axis, and peak...... profiles are obtained with the scattering vector parallel to the in situ tensile axis. In this case the profiles initially show an opposite asymmetry, but during the in situ deformation the asymmetry reverses sign as the deformation under new loading conditions leads to changes in the intra-grain stresses....

  4. On object-orientation

    NARCIS (Netherlands)

    Diertens, B.

    2010-01-01

    Although object-orientation has been around for several decades, its key concept abstraction has not been exploited for proper application of object-orientation in other phases of software development than the implementation phase. We mention some issues that lead to a lot of confusion and obscurity

  5. Aspect-Oriented Programming

    NARCIS (Netherlands)

    Bergmans, Lodewijk; Videira Lopes, Cristina; Moreira, Ana; Demeyer, Serge

    1999-01-01

    Aspect-oriented programming is a promising idea that can improve the quality of software by reduce the problem of code tangling and improving the separation of concerns. At ECOOP'97, the first AOP workshop brought together a number of researchers interested in aspect-orientation. At ECOOP'98, during

  6. Coarse-grain parallelism using remote method invocation

    Energy Technology Data Exchange (ETDEWEB)

    Hebert, A. [Ecole Polytechnique de Montreal, Qc. (Canada)

    2003-07-01

    The paper describes a user-oriented framework specifically designed to facilitate the development and supervision of coarse-grain parallel applications in reactor physics. The proposed user-oriented framework was designed and implemented in Java, in such a way to obtain a simple and robust application. The proposed approach is based on Java Native Interface(JNI) for integrating the Fortran legacy code and on Remote Method Invocation (RMI) for distributing the calculation load over the farm of processors. Dynamic code downloading over the network is possible. We are presenting the application of this approach to supervision of lattice calculations using the open source Dragon code. The Java layer surrounding Dragon can also be used to construct execution procedures, computational schemes and graphical user interfaces. This approach can be used with any existing legacy Fortran code, as soon as its input/output data structures are Dragon-compatible. (author)

  7. Universal scaling of grain size distributions during dislocation creep

    Science.gov (United States)

    Aupart, Claire; Dunkel, Kristina G.; Angheluta, Luiza; Austrheim, Håkon; Ildefonse, Benoît; Malthe-Sørenssen, Anders; Jamtveit, Bjørn

    2017-04-01

    Grain size distributions are major sources of information about the mechanisms involved in ductile deformation processes and are often used as paleopiezometers (stress gauges). Several factors have been claimed to influence the stress vs grain size relation, including the water content (Jung & Karato 2001), the temperature (De Bresser et al., 2001), the crystal orientation (Linckens et al., 2016), the presence of second phase particles (Doherty et al. 1997; Cross et al., 2015), and heterogeneous stress distributions (Platt & Behr 2011). However, most of the studies of paleopiezometers have been done in the laboratory under conditions different from those in natural systems. It is therefore essential to complement these studies with observations of naturally deformed rocks. We have measured olivine grain sizes in ultramafic rocks from the Leka ophiolite in Norway and from Alpine Corsica using electron backscatter diffraction (EBSD) data, and calculated the corresponding probability density functions. We compared our results with samples from other studies and localities that have formed under a wide range of stress and strain rate conditions. All distributions collapse onto one universal curve in a log-log diagram where grain sizes are normalized by the mean grain size of each sample. The curve is composed of two straight segments with distinct slopes for grains above and below the mean grain size. These observations indicate that a surprisingly simple and universal power-law scaling describes the grain size distribution in ultramafic rocks during dislocation creep irrespective of stress levels and strain rates. Cross, Andrew J., Susan Ellis, and David J. Prior. 2015. « A Phenomenological Numerical Approach for Investigating Grain Size Evolution in Ductiley Deforming Rocks ». Journal of Structural Geology 76 (juillet): 22-34. doi:10.1016/j.jsg.2015.04.001. De Bresser, J. H. P., J. H. Ter Heege, and C. J. Spiers. 2001. « Grain Size Reduction by Dynamic

  8. Numerical Study of Splash Detail Due to Grain Impact on Granular Bed

    Science.gov (United States)

    Tanabe, Takahiro; Niiya, Hirofumi; Awazu, Akinori; Nishimori, Hiraku

    2017-04-01

    Massive sediment transport phenomena, such as sand storm and drifting snow, pose a considerable threat to human life. Further, the formation of geomorphological patterns on sand-desert and snowfield surfaces as a result of sediment transport, such as dunes and ripples, is of considerable research interest. Because the major component of the grain entrainment into the air is caused by both the collision and ejection, it is necessary to focus on the collisions between wind-blown grains and surface of sand field along with the resultant ejection grains from the surfaces, which processes are, as a whole, called a splash process. However, because of complexity of jumping grains over the ground surface, detailed measurement is very hard. Therefore, to investigate the splash process, we simulate detailed process of splash caused by 1-grain impact onto a randomly packed granular bed using discrete element method. As a result, we obtained good correspondence between our numerical results and the findings of previous experiments for the movement of ejected grains. Furthermore, the distributions of the ejection angle and the vertical ejection speed for individual grains vary depending on the relative timing at which the grains are ejected after the initial impact. Obvious differences are observed between the distributions of grains ejected during the earlier and later splash periods: the form of the vertical ejection-speed distribution varies from a power-law form to a lognormal form with time, and this difference is related to the grain trajectory after ejection [1]. In addition, we focus on the bulk dynamics inside the granular bed to relate the ejected grains behavior to the force propagations from the first impact to the ejection of each grain. [1] T. Tanabe, T. Shimada, N. Ito, and, H. Nishimori, (submitted)

  9. Molecule Formation on Interstellar Grains

    Science.gov (United States)

    Vidali, G.

    2011-05-01

    The first experiments that were expressively designed to be applicable to hydrogen formation reactions in the ISM measured the efficiency of formation of molecular hydrogen on a polycrystalline olivine (Pirronello et al. (1997a)). It soon turned out that more was needed, and research began on the mechanism of reaction, on the in uence of the surface morphology, and on the excitation of the just- ormed molecule. In this review, I summarize what we learned from these and other experiments, and where more work is needed: in the elementary steps of reaction, in the bridging of the laboratory-ISM gap (large ux/large surface - small ux/small grain) using simulations, and in using realistic samples of dust grains. Understanding what experiments can and cannot deliver will help in designing and targeting observations, and vice-versa.

  10. Evolution of grain structure and recombination active dislocations in extraordinary tall conventional and high performance multi-crystalline silicon ingots

    Science.gov (United States)

    Trempa, M.; Kupka, I.; Kranert, C.; Lehmann, T.; Reimann, C.; Friedrich, J.

    2017-02-01

    In this work one high performance multi-crystalline silicon ingot and one conventional multi-crystalline silicon ingot, each with an extraordinary ingot height of 710 mm, were replicated by the successive growth of eight G1 ingots to evaluate the potential advantage of extraordinary tall HPM ingots in industrial production. By analyzing different grain structure parameters like mean grain size, grain orientation and grain boundary type distribution as well as the recombination active dislocation area over the complete ingot height, it was observed that the material properties strongly differ in the initial state of growth for the two material types. However, at ingot heights above 350 mm, the difference has vanished and the grain structure properties for both materials appear similar. It is shown that the evolution of the grain structure in both material types can be explained by the same grain selection and grain boundary generation/annihilation mechanisms whereas the current grain structure determines which mechanisms are the most dominant at a specific ingot height. Since the grain structure directly influences the dislocation content in the silicon material, also the recombination active dislocation area becomes equal in high performance and conventional multi-crystalline silicon material at ingot heights above 350 mm. From these results it is concluded that the advantage of high performance silicon material is limited to the first grown 350 mm of the ingot.

  11. Crop rotations for grain production

    OpenAIRE

    Olesen, Jørgen E.; Rasmussen, Ilse Ankær; Askegaard, Margrethe

    2000-01-01

    There is an increasing demand for organically grown cereal grains in Denmark, which is expected to cause a change in the typical organic farm structure away from dairy farming and towards arable farming. Such a change may reduce the stability of the farming systems, because of decreasing soil fertility and problems with weed control. There have only been a limited number of studies under temperate conditions in Europe and North America, where different crop rotations have been compared under ...

  12. Structure and properties of grain boundaries

    Science.gov (United States)

    Balluffi, R. W.; Bristowe, P. D.

    1984-03-01

    Results were obtained in the following areas: determination of relative grain boundary energies by the rotating crystallite method; simple structural unit model for core dependent properties of tilt boundaries; twist boundary energies for metals with long ranged pairwise interatomic potentials; structural unit/grain boundary dislocation model for grain boundary structure; detection of expansion of boundaries using diffraction; effect of secondary relaxations on diffraction from high-(SIGMA) 001 twist boundaries; and mechanism of grain boundary migration.

  13. Small grains and IRAS colors

    Science.gov (United States)

    Boulanger, F.; Beichman, C.; Helou, G.; Desert, F. X.; Perault, M.

    1988-01-01

    The paper studies how infrared colors of dust emission from the interstellar medium vary with the energy density of the radiation field on the basis of IRAS observation of the California Nebula. The data suggest that color variations result from a combinatin of equilibrium emission from large grains, and nonequilibrium emission from small grains, with destruction of the small grains emitting at 12 microns at high energy density; it is estimated that 80 percent of these small particles are destroyed for an energy density in ultraviolet photons larger than 50 times that of the average interstellar radiation field in the solar neighborhood. In a color-color diagram, I(v)(60 microns)/I(v)(100 microns) versus I(v)(12 microns)/I(v)(25 microns), the California Nebula measurements at various distances to the ionizing star Zeta Per follow a sequence similar to that of galaxies. This result shows that the position of a galaxy along this sequence is a measure of the intensity of the radiation field in the regions responsible for the infrared emission.

  14. EFFECT OF AUSTENITIC CRYSTAL ORIENTATION IN A MULTIPHASE STEEL ANALYZED BY A DISCRETE DISLOCATION-TRANSFORMATION MODEL

    NARCIS (Netherlands)

    Shi, J.; Turteltaub, S.; Van der Giessen, E.

    A discrete dislocation-transformation model is used to analyze the response of an aggregate of ferritic and austenitic grains that can transform into martensite. In particular, the influence of the crystal orientation of the austenitic grains on the plastic and transformation behavior is studied. It

  15. Austenite Grain Size Estimtion from Chord Lengths of Logarithmic-Normal Distribution

    Directory of Open Access Journals (Sweden)

    Adrian H.

    2017-12-01

    Full Text Available Linear section of grains in polyhedral material microstructure is a system of chords. The mean length of chords is the linear grain size of the microstructure. For the prior austenite grains of low alloy structural steels, the chord length is a random variable of gamma- or logarithmic-normal distribution. The statistical grain size estimation belongs to the quantitative metallographic problems. The so-called point estimation is a well known procedure. The interval estimation (grain size confidence interval for the gamma distribution was given elsewhere, but for the logarithmic-normal distribution is the subject of the present contribution. The statistical analysis is analogous to the one for the gamma distribution.

  16. EFFECT OF THE METHOD OF PREPARATION OF RYE GRAIN ON ITS MICROSTRUCTURE AND SAFETY INDICATORS

    Directory of Open Access Journals (Sweden)

    E. I. Ponomareva

    2014-01-01

    Full Text Available Summary. One of the main issues in the baking industry is currently the development and introduction of new products increased nutritional value. By promising area of enrichment products include the use of whole grains. Currently pressing issue is expanding the range of bakery products by applying the functional orientation of the whole grain rye. Expand the range of bread from a mixture of rye and wheat flour can be due to the use of whole grain rye. German company "Irex" developed a method of preparing a mixture of products from rye and wheat flour with the addition of acidified whole rye "Saftkorn." The experiment was conducted microstructure definition, content of toxic elements (cadmium, lead, mercury, arsenic and microbiological indicators rye "Saftkorn" and "Avanguard". The microstructure and grain safety performance prepared in different ways. The difference in the microstructure of rye "Saftсorn" (Germany and "Аvangard" (Russia. Proven that their microbiological parameters were within acceptable limits.

  17. Electronic properties of a grain boundary in Sb-doped ZnO

    Energy Technology Data Exchange (ETDEWEB)

    Carlsson, J.M.; Hellsing, B. [Experimental Physics, Chalmers and Goeteborg University, Gothenburg (Sweden); Domingos, H.S.; Bristowe, P.D. [Department of Materials Science and Metallurgy, University of Cambridge, Cambridge (United Kingdom)]. E-mail: pdb1000@cus.cam.ac.uk

    2001-11-05

    The electronic properties of a {sigma}=13 32.2 deg. [0001] tilt grain boundary in ZnO have been investigated using first-principles calculations. Two atomic models for the boundary have been considered, one of which contains structural units that are consistent with those observed for this orientation using electron microscopy. Doping both the grain boundary models with antimony reveals a strong driving force for segregation. Analysis of the electronic densities of states, bond populations and Mulliken charges shows that antimony creates a localized impurity state in the grain boundary and acts as a donor dopant. The resulting charge accumulation at the grain boundary together with the presence of local bonds that are metallic in character, will influence the mechanism for charge transport across the interface and this is discussed in relation to varistor applications. (author)

  18. Electronic properties of a grain boundary in Sb-doped ZnO

    Science.gov (United States)

    Carlsson, J. M.; Hellsing, B.; Domingos, H. S.; Bristowe, P. D.

    2001-11-01

    The electronic properties of a Σ = 13 32.2° [0001] tilt grain boundary in ZnO have been investigated using first-principles calculations. Two atomic models for the boundary have been considered, one of which contains structural units that are consistent with those observed for this orientation using electron microscopy. Doping both the grain boundary models with antimony reveals a strong driving force for segregation. Analysis of the electronic densities of states, bond populations and Mulliken charges shows that antimony creates a localized impurity state in the grain boundary and acts as a donor dopant. The resulting charge accumulation at the grain boundary together with the presence of local bonds that are metallic in character, will influence the mechanism for charge transport across the interface and this is discussed in relation to varistor applications.

  19. Red grain mycetoma foot in Western Rajasthan

    Directory of Open Access Journals (Sweden)

    Mathur D

    1994-01-01

    Full Text Available Usually the colour of the grains seen in cases of mycetoma are either black or yellow. Recently there were reports that unusual red grains had been noticed in cases of mycetoma. A case of red grain mycetoma is reported.

  20. Structure and chemistry of the sorghum grain

    Science.gov (United States)

    Sorghum is grown around the world and often under harsh and variable environmental conditions. Combined with the high degree of genetic diversity present in sorghum, this can result in substantial variability in grain composition and grain quality. While similar to other cereal grains such as maize ...

  1. Bioactive compounds in whole grain wheat

    NARCIS (Netherlands)

    Mateo Anson, N.

    2010-01-01

    Bread can be healthier! Consuming whole-grain foods can prevent cardiovascular diseases, type-2 diabetes and metabolic syndrome. This is due to bioactive compounds in whole grain, such as antioxidants and anti-inflammatory compounds. We found that the different fractions of a wheat grain vary much

  2. Wildlife value orientations

    DEFF Research Database (Denmark)

    Gamborg, Christian; Jensen, Frank Søndergaard

    2016-01-01

    This article examined value orientations toward wildlife among the adult general Danish public in relation to age, sex, past and present residence, education, and income, using a U.S. survey instrument on Wildlife Value Orientations (WVO). The study used an Internet-based questionnaire sent...... the general public’s WVO can be used to check against the orientation of other specific groups such as landowners and hunters. It can also prove useful for developing specific hunting and wildlife policies such as certification of wildlife managers....

  3. Grain-size sorting and slope failure in experimental subaqueous grain flows

    NARCIS (Netherlands)

    Kleinhans, M.G.; Asch, Th.W.J. van

    2005-01-01

    Grain-size sorting in subaqueous grain flows of a continuous range of grain sizes is studied experimentally with three mixtures. The observed pattern is a combination of stratification and gradual segregation. The stratification is caused by kinematic sieving in the grain flow. The segregation is

  4. WITHDRAWN: Reality orientation for dementia.

    Science.gov (United States)

    Spector, A; Orrell, M; Davies, S; Woods, B

    2007-07-18

    Reality Orientation (RO) was first described as a technique to improve the quality of life of confused elderly people, although its origins lie in an attempt to rehabilitate severely disturbed war veterans, not in geriatric work. It operates through the presentation of orientation information (eg time, place and person-related) which is thought to provide the person with a greater understanding of their surroundings, possibly resulting in an improved sense of control and self-esteem. There has been criticism of RO in clinical practice, with some fear that it has been applied in a mechanical fashion and has been insensitive to the needs of the individual. There is also a suggestion that constant relearning of material can actually contribute to mood and self-esteem problems. There is often little consistent application of psychological therapies in dementia services, so a systematic review of the available evidence is important in order to identify the effectiveness of the different therapies. Subsequently, guidelines for their use can be made on a sound evidence base. To assess the evidence of effectiveness for the use of Reality Orientation (RO) as a classroom-based therapy on elderly persons with dementia. Computerised databases were searched independently by 2 reviewers entering the terms 'Reality Orientation, dementia, control, trial or study'. Relevant web sites were searched and some hand searching was conducted by the reviewer. Specialists in the field were approached for undocumented material, and all publications found were searched for additional references. All randomized controlled trials (RCTs), and all controlled trials with some degree of concealment, blinding or control for bias (second order evidence) of Reality Orientation as an intervention for dementia were included. The criteria for inclusion/exclusion involved systematic assessment of the quality of study design and the risk of bias, using a standard data extraction form. A measure of

  5. Orientation statistics of non-spherical particles sedimenting in turbulence

    Science.gov (United States)

    Kramel, Stefan; Tierney, Lydia; Rees, Wyatt; Voth, Greg A.; Menon, Udayshankar; Roy, Anubhab; Koch, Donald L.

    2016-11-01

    We study the sedimentation of non-spherical particles in turbulence. The particle orientation is determined by a competition between inertial torques causing a preferential alignment and turbulence randomizing the orientation. The relative importance is quantified by a settling number SF defined as the ratio of the tumbling-rate from inertial torques and from turbulence. The experiments focus on the orientation statistics of particles formed from several slender arms, including fibers and particles with three arms in planar symmetry (triads), which allows us to study alignment of both fibers and disk-like particles. We measure the time-resolved 3D orientations of the particles along with the fluid velocity field around them in a vertical water tunnel. An active jet array with 40 individually controllable jets enables us to adjust the turbulence intensity and observe the transition from strongly aligned particles to randomized orientations as SF is decreased. Results are compared to simulations and theory based on slender body theory.

  6. A keystone-like grain in hornet comb cells: its nature and physical properties.

    Science.gov (United States)

    Ishay, Jacob S; Riabinin, Ksenia; Kozhevnikov, Maria; van der Want, Hans; Stokroos, Ietse

    2003-01-01

    In the roof of cells built by the Oriental hornet, Vespa orientalis (Vespinae, Hymenoptera), there is one or more grains differing in their composition and shape from the surrounding structures. These grains have a diameter of 100-200 microm and protrude slightly from the roof inward. They contain primarily a large percentage of Ti but also Fe and occasionally Si. The mineral makeup in the grains is still uncertain, but it seems that the minerals belong to the group called perovskite. These grains in the hornet's comb may originate from the soil around the nest, that is, comprised of ceramic matter, but it is also possible that they are secreted from a gland within the frons plate of the hornet because the fungus-like secretion in this gland contains elements similar to those in the roof of the comb cells. We conjecture that the grain in question serves as a reference point for the hornets that build the cell walls in the direction of gravity. The cement whereby the building hornets conjoin the various building materials, whether organic (cellulose and the like) or inorganic (sand grains or tiny stones), is a saliva that is secreted from their oral gland, which upon release hardens into a polymeric glue. The ceramic grain embedded within this polymeric matrix is endowed with different physical properties and can therefore respond differently to the tension or pressure of the surrounding walls.

  7. Grain storage at farm and warehouses level

    Directory of Open Access Journals (Sweden)

    Neacşu, A. N.

    2010-12-01

    Full Text Available Grain storage is very important because the quality of flour obtained from grain will be found in the finished products’ quality. Grains must be stored in well established conditions regarding temperature, humidity, airflow, trying to avoid the risk of being attacked by rodents and insects. If these conditions are not complied with, some qualitative deficits of the grains - such as mould at pH, infestation, fermentation etc. - may appear. The storage methods are those responsible for maintaining a good quality of the grains.

  8. The Acute Impact of Ingestion of Sourdough and Whole-Grain Breads on Blood Glucose, Insulin, and Incretins in Overweight and Obese Men

    Directory of Open Access Journals (Sweden)

    Anita Mofidi

    2012-01-01

    Full Text Available Consumption of whole-grain and sourdough breads is associated with improved glucose homeostasis. We examined the impact of commercial breads on biomarkers of glucose homeostasis in subjects at risk for glucose intolerance. In a randomized, crossover study, overweight or obese males ingested 11-grain, sprouted-grain, 12-grain, sourdough, or white bread on different occasions, matched for available carbohydrate (50 g in part 1 (n=12 and bread mass (107 g in part 2 (n=11, and blood glucose, insulin and glucose-dependent insulinotropic polypeptide (GIP and glucagon-like peptide-1 (GLP-1 were determined for 3 h. In part 1, glucose response for sprouted-grain was lower than 11-grain, sourdough, and white breads. Insulin area under the curve (AUC for sourdough and white was lower than 11-grain and sprouted-grain breads. GLP-1 response to sourdough was lower than all breads. In part 2, glucose and insulin AUC for sourdough was greater than 11-grain, sprouted-grain, and 12-grain breads. Sprouted-grain bread improved glycemia by lowering glucose response and increasing GLP-1 response. In overweight and obese men, the glycemic response to sprouted grain bread was reduced in both parts 1 and 2 while the other whole-grain test breads did not improve metabolic responses in the acute postprandial state.

  9. The Acute Impact of Ingestion of Sourdough and Whole-Grain Breads on Blood Glucose, Insulin, and Incretins in Overweight and Obese Men

    Science.gov (United States)

    Mofidi, Anita; Ferraro, Zachary M.; Stewart, Katherine A.; Tulk, Hilary M. F.; Robinson, Lindsay E.; Duncan, Alison M.; Graham, Terry E.

    2012-01-01

    Consumption of whole-grain and sourdough breads is associated with improved glucose homeostasis. We examined the impact of commercial breads on biomarkers of glucose homeostasis in subjects at risk for glucose intolerance. In a randomized, crossover study, overweight or obese males ingested 11-grain, sprouted-grain, 12-grain, sourdough, or white bread on different occasions, matched for available carbohydrate (50 g) in part 1 (n = 12) and bread mass (107 g) in part 2 (n = 11), and blood glucose, insulin and glucose-dependent insulinotropic polypeptide (GIP) and glucagon-like peptide-1 (GLP-1) were determined for 3 h. In part 1, glucose response for sprouted-grain was lower than 11-grain, sourdough, and white breads. Insulin area under the curve (AUC) for sourdough and white was lower than 11-grain and sprouted-grain breads. GLP-1 response to sourdough was lower than all breads. In part 2, glucose and insulin AUC for sourdough was greater than 11-grain, sprouted-grain, and 12-grain breads. Sprouted-grain bread improved glycemia by lowering glucose response and increasing GLP-1 response. In overweight and obese men, the glycemic response to sprouted grain bread was reduced in both parts 1 and 2 while the other whole-grain test breads did not improve metabolic responses in the acute postprandial state. PMID:22474577

  10. SERVICE ORIENTED ARCHITECTURE

    Directory of Open Access Journals (Sweden)

    Stanculea Liana

    2009-05-01

    Full Text Available Service-oriented architecture (SOA supply methods for systems development and integration where work interoperable services. A SOA suppose application functionality distribution in distinct units called services that communicate with each other. This ser

  11. Implementing Strategic Orientation

    Science.gov (United States)

    Fischer, Arthur K.; Brownback, Sarah

    2012-01-01

    An HRM case dealing with problems and issues of setting up orientation programs which align with corporate strategy. Discussion concerns how such a case can be used to exhibit the alignment between HRM and business strategy.

  12. Grain-scale characterization of FCC/BCC correspondence relations and variant selection

    Science.gov (United States)

    He, Youliang

    The misorientations between FCC and BCC crystals are characterized according to the common lattice correspondence relationships in terms of their parallelism conditions. Individual variants of the six models, namely the Bain, Kurdjumov-Sachs, Nishiyama-Wassermann, Pitsch, Greninger-Troiano and inverse Greninger-Troiano relations, are identified and represented in both pole figure form and in Rodrigues-Frank space with respect to various coordinate frames. In this way, the relations between the variants of these models are clarified. The orientations of the kamacite (BCC) lamellae transformed from a single prior-taenite (FCC) grain in the Gibeon meteorite were measured by analyzing the electron backscatter diffraction patterns. The local misorientations between individual FCC and BCC crystals along their common interfaces were computed and are compared with the common lattice correspondence relationships. The orientation relations between the alpha and gamma phases in the plessite regions are also characterized. The Neumann bands (mechanical twins) and their orientation variations within individual kamacite lamellae were studied and analyzed. A Nb-bearing TRIP steel was control rolled and a certain amount of austenite was retained through appropriate heat treatment. EBSD measurements were conducted on specimens deformed to various reductions and the textures (ODF's) of both the gamma and alpha phases were obtained from the measured data points. The orientations of the bainite formed within individual prior-austenite grains are compared to those expected from the common correspondence relationships and the average orientation of the prior-austenite grain. The crystallography of the bainite laths within a single packet is also characterized. The orientations of the bainite formed from individual prior-austenite grains are analyzed with respect to their parent orientations. The occurrence of variant selection at the grain scale was examined using a dislocation

  13. Cultural Orientation and Interdisciplinarity

    DEFF Research Database (Denmark)

    Nielsen, Sofie Søndergaard

    2004-01-01

    I begin the article with an account of the background to the German debate on ‘Literaturwissenschaft als Kulturwissenschaft’, including the introduction of the concept of ’cultural orientation’ as a strategy for achieving interdisciplinarity. This is followed by a consideration of the discussion...... of the object of literary studies as a way of defining the disciplinarity or identity of literary studies. Finally I summarize some of the characteristics of culturally orientated literary studies....

  14. Barnett relaxation in non-symmetric grains

    Science.gov (United States)

    Kolasi, Erald; Weingartner, Joseph C.

    2017-10-01

    Barnett relaxation, first described by Purcell in 1979, appears to play a major role in the alignment of grains with the interstellar magnetic field. In 1999, Lazarian and Draine proposed that Barnett relaxation and its relative, nuclear relaxation, can induce grains to flip. If this thermal flipping is rapid then the dynamical effect of torques that are fixed relative to the grain body can be greatly reduced. To date, detailed studies of Barnett relaxation have been confined to grains exhibiting dynamic symmetry. In 2009, Weingartner argued that internal relaxation cannot induce flips in any grains, whether they exhibit dynamic symmetry or not. In this work, we develop approximate expressions for the dissipation rate and diffusion coefficient for Barnett relaxation. We revisit the issue of internally induced thermal flipping, finding that it cannot occur for grains with dynamic symmetry, but does occur for grains lacking dynamic symmetry.

  15. Matérn's hard core models of types I and II with arbitrary compact grains

    DEFF Research Database (Denmark)

    Kiderlen, Markus; Hörig, Mario

    Matérn's classical hard core models can be interpreted as models obtained from a stationary marked Poisson process by dependent thinning. The marks are balls of fixed radius, and a point is retained when its associated ball does not hit any other balls (type I) or when its random birth time...... is strictly smaller than the birth times of all balls hitting it (type II). Extending ideas of [M. Månsson and M. Rudemo. Random patterns of nonoverlapping convex grains. Adv. in Appl. Probab., 34:718--738, 2002.], who considered grains that are isotropic rotations or random scalings of a fixed convex set, we......-Minkowski's inequality, the volume density associated to model II turns out to be bounded by 2−d. This bound is sharp. It is attained asymptotically (when the proposal intensity tends to infinity) only when all grains coincide with one deterministic origin-symmetric convex set. We also discuss how known connections...

  16. Whole grains and health: from theory to practice--highlights of The Grains for Health Foundation's Whole Grains Summit 2012.

    Science.gov (United States)

    McKeown, Nicola M; Jacques, Paul F; Seal, Chris J; de Vries, Jan; Jonnalagadda, Satya S; Clemens, Roger; Webb, Densie; Murphy, Lee Anne; van Klinken, Jan-Willem; Topping, David; Murray, Robyn; Degeneffe, Dennis; Marquart, Leonard F

    2013-05-01

    The Grains for Health Foundation's Whole Grains Summit, held May 19-22, 2012 in Minneapolis, was the first meeting of its kind to convene >300 scientists, educators, food technologists, grain breeders, food manufacturers, marketers, health professionals, and regulators from around the world. Its goals were to identify potential avenues for collaborative efforts and formulate new approaches to whole-grains research and health communications that support global public health and business. This paper summarizes some of the challenges and opportunities that researchers and nutrition educators face in expanding the knowledge base on whole grains and health and in translating and disseminating that knowledge to consumers. The consensus of the summit was that effective, long-term, public-private partnerships are needed to reach across the globe and galvanize the whole-grains community to collaborate effectively in translating whole-grains science into strategies that increase the availability and affordability of more healthful, grain-based food products. A prerequisite of that is the need to build trust among diverse multidisciplinary professionals involved in the growing, producing, marketing, and regulating of whole-grain products and between the grain and public health communities.

  17. Magnetic preferential orientation of metal oxide superconducting materials

    Science.gov (United States)

    Capone, Donald W.; Dunlap, Bobby D.; Veal, Boyd W.

    1990-01-01

    A superconductor comprised of a polycrystalline metal oxide such as YBa.sub.2 Cu.sub.3 O.sub.7-X (where 0material permits the use of an applied magnetic field to orient the individual crystals when in the superconducting state to substantially increase current transport between adjacent grains. In another embodiment, the anisotropic paramagnetic susceptibility of rare-earth ions substituted into the oxide material is made use of as an applied magnetic field orients the particles in a preferential direction. This latter operation can be performed with the material in the normal (non-superconducting) state.

  18. Antibody orientation on biosensor surfaces: a minireview.

    Science.gov (United States)

    Trilling, Anke K; Beekwilder, Jules; Zuilhof, Han

    2013-03-21

    Detection elements play a key role in analyte recognition in biosensors. Therefore, detection elements with high analyte specificity and binding strength are required. While antibodies (Abs) have been increasingly used as detection elements in biosensors, a key challenge remains - the immobilization on the biosensor surface. This minireview highlights recent approaches to immobilize and study Abs on surfaces. We first introduce Ab species used as detection elements, and discuss techniques recently used to elucidate Ab orientation by determination of layer thickness or surface topology. Then, several immobilization methods will be presented: non-covalent and covalent surface attachment, yielding oriented or random coupled Abs. Finally, protein modification methods applicable for oriented Ab immobilization are reviewed with an eye to future application.

  19. Modeling the effect of neighboring grains on twin growth in HCP polycrystals

    Science.gov (United States)

    Kumar, M. Arul; Beyerlein, I. J.; Lebensohn, R. A.; Tomé, C. N.

    2017-09-01

    In this paper, we study the dependence of neighboring grain orientation on the local stress state around a deformation twin in a hexagonal close packed (HCP) crystal and its effects on the resistance against twin thickening. We use a recently developed, full-field elasto-visco-plastic formulation based on fast Fourier transforms that account for the twinning shear transformation imposed by the twin lamella. The study is applied to Mg, Zr and Ti, since these HCP metals tend to deform by activation of different types of slip modes. The analysis shows that the local stress along the twin boundary are strongly controlled by the relative orientation of the easiest deformation modes in the neighboring grain with respect to the twin lamella in the parent grain. A geometric expression that captures this parent-neighbor relationship is proposed and incorporated into a larger scale, mean-field visco-plastic self-consistent model to simulate the role of neighboring grain orientation on twin thickening. We demonstrate that the approach improves the prediction of twin area fraction distribution when compared with experimental observations.

  20. Quaternion-based disorientation coloring of orientation maps.

    Science.gov (United States)

    Thomsen, Knud; Mehnert, Klaus; Trimby, Patrick W; Gholinia, Ali

    2017-11-01

    The authors of the present work propose a color coding technique using quaternions for the display of crystallographic orientation data such as EBSD maps. The main difference to existing color coding techniques in this field is that it creates a color space, within which the perceived color differences are approximately proportional to Euclidean distances in the corresponding 3D quaternion vector space, and thus approximately proportional to mutual disorientation angles. Since all disorientation parameters (axis and angle pairs, but represented as quaternions) are taken into account, color ambiguities appearing in maps created by other techniques are successfully avoided, and the sub-grain orientation differences within grains can be unambiguously visualized. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. 77 FR 76452 - Grain Inspection Advisory Committee Reestablishment

    Science.gov (United States)

    2012-12-28

    ... Doc No: 2012-31281] DEPARTMENT OF AGRICULTURE Grain Inspection, Packers and Stockyards Administration Grain Inspection Advisory Committee Reestablishment AGENCY: Grain Inspection, Packers and Stockyards... of Agriculture has reestablished the Grain Inspection, Packers and Stockyards Administration (GIPSA...

  2. Flake Orientation Effects On Physical and Mechanical Properties of Sweetgum Flakeboard

    Science.gov (United States)

    T.F. Shupe; Chung-Yun Hse; E.W. Price

    2001-01-01

    Research was initiated to determine the effect of flake orientation on the physical and mechanical properties offlakeboard. The panel fabrication techniques investigated were single-layer panels with random and oriented flake distribution, three-layer, five-layer, and seven-layer panels. Single-layer oriented panels had panel directional property ratios of 11.8 and 12....

  3. Random packing of colloids and granular matter

    NARCIS (Netherlands)

    Wouterse, A.

    2008-01-01

    This thesis deals with the random packing of colloids and granular matter. A random packing is a stable disordered collection of touching particles, without long-range positional and orientational order. Experimental random packings of particles with the same shape but made of different materials

  4. Reconstruction of 3d grain boundaries from rock thin sections, using polarised light

    Science.gov (United States)

    Markus Hammes, Daniel; Peternell, Mark

    2016-04-01

    Grain boundaries affect the physical and chemical properties of polycrystalline materials significantly by initiating reactions and collecting impurities (Birchenall, 1959), and play an essential role in recrystallization (Doherty et al. 1997). In particular, the shape and crystallographic orientation of grain boundaries reveal the deformation and annealing history of rocks (Kruhl and Peternell 2002, Kuntcheva et al. 2006). However, there is a lack of non-destructive and easy-to-use computer supported methods to determine grain boundary geometries in 3D. The only available instrument using optical light to measure grain boundary angles is still the polarising microscope with attached universal stage; operated manually and time-consuming in use. Here we present a new approach to determine 3d grain boundary orientations from 2D rock thin sections. The data is recorded by using an automatic fabric analyser microscope (Peternell et al., 2010). Due to its unique arrangement of 9 light directions the highest birefringence colour due to each light direction and crystal orientation (retardation) can be determined at each pixel in the field of view. Retardation profiles across grain boundaries enable the calculation of grain boundary angle and direction. The data for all positions separating the grains are combined and further processed. In combination with the lateral position of the grain boundary, acquired using the FAME software (Hammes and Peternell, in review), the data is used to reconstruct a 3d grain boundary model. The processing of data is almost fully automatic by using MATLAB®. Only minor manual input is required. The applicability was demonstrated on quartzite samples, but the method is not solely restricted on quartz grains and other birefringent polycrystalline materials could be used instead. References: Birchenall, C.E., 1959: Physical Metallurgy. McGraw-Hill, New York. Doherty, R.D., Hughes, D.A., Humphreys, F.J., Jonas, J.J., Juul Jensen, D., Kassner, M

  5. Surface and grain boundary scattering in nanometric Cu thin films: A quantitative analysis including twin boundaries

    Energy Technology Data Exchange (ETDEWEB)

    Barmak, Katayun [Department of Applied Physics and Applied Mathematics, Columbia University, New York, New York 10027 and Department of Materials Science and Engineering and Materials Research Science and Engineering Center, Carnegie Mellon University, 5000 Forbes Avenue, Pittsburgh, Pennsylvania 15213 (United States); Darbal, Amith [Department of Materials Science and Engineering and Materials Research Science and Engineering Center, Carnegie Mellon University, 5000 Forbes Avenue, Pittsburgh, Pennsylvania 15213 (United States); Ganesh, Kameswaran J.; Ferreira, Paulo J. [Materials Science and Engineering, The University of Texas at Austin, 1 University Station, Austin, Texas 78712 (United States); Rickman, Jeffrey M. [Department of Materials Science and Engineering and Department of Physics, Lehigh University, Bethlehem, Pennsylvania 18015 (United States); Sun, Tik; Yao, Bo; Warren, Andrew P.; Coffey, Kevin R., E-mail: kb2612@columbia.edu [Department of Materials Science and Engineering, University of Central Florida, 4000 Central Florida Boulevard, Orlando, Florida 32816 (United States)

    2014-11-01

    The relative contributions of various defects to the measured resistivity in nanocrystalline Cu were investigated, including a quantitative account of twin-boundary scattering. It has been difficult to quantitatively assess the impact twin boundary scattering has on the classical size effect of electrical resistivity, due to limitations in characterizing twin boundaries in nanocrystalline Cu. In this study, crystal orientation maps of nanocrystalline Cu films were obtained via precession-assisted electron diffraction in the transmission electron microscope. These orientation images were used to characterize grain boundaries and to measure the average grain size of a microstructure, with and without considering twin boundaries. The results of these studies indicate that the contribution from grain-boundary scattering is the dominant factor (as compared to surface scattering) leading to enhanced resistivity. The resistivity data can be well-described by the combined Fuchs–Sondheimer surface scattering model and Mayadas–Shatzkes grain-boundary scattering model using Matthiessen's rule with a surface specularity coefficient of p = 0.48 and a grain-boundary reflection coefficient of R = 0.26.

  6. Laser shock peening effect on the dislocation transitions and grain refinement of Al–Mg–Si alloy

    Energy Technology Data Exchange (ETDEWEB)

    Trdan, U., E-mail: uros.trdan@fs.uni-lj.si [University of Ljubljana, Faculty of Mechanical Engineering, Askerceva 6, 1000 Ljubljana (Slovenia); Skarba, M., E-mail: michal.skarba@stuba.sk [Slovak University of Technology in Bratislava, Faculty of Materials Science and Technology in Trnava, Paulínska 16, 917 24 Trnava (Slovakia); Grum, J., E-mail: janez.grum@fs.uni-lj.si [University of Ljubljana, Faculty of Mechanical Engineering, Askerceva 6, 1000 Ljubljana (Slovenia)

    2014-11-15

    This paper systematically investigates the effect of laser shock peening without coating parameters on the microstructural evolution, and dislocation configurations induced by ultra-high plastic strains and strain rates. Based on an analysis of optical microscopy, polarized light microscopy, transmission electron microscopy observations and residual stress analysis, the significant influence of laser shock peening parameters due to the effect of plasma generation and shock wave propagation has been confirmed. Although the optical microscopy results revealed no significant microstructural changes after laser shock peening, i.e. no heat effect zone and differences in the distribution of second-phase particles, expressive influence of laser treatment parameters on the laser shock induced craters was confirmed. Moreover, polarized light microscopy results have confirmed the existence of well-defined longish grains up to 455 μm in length in the centre of the plate due to the rolling effect, and randomly oriented smaller grains (20 μm × 50 μm) in the surface due to the static recrystallization effect. Laser shock peening is reflected in an exceptional increase in dislocation density with various configurations, i.e. dislocation lines, dislocation cells, dislocation tangles, and the formation of dense dislocation walls. More importantly, the microstructure is considerably refined due to the effect of strain deformations induced by laser shock peening process. The results have confirmed that dense dislocation structures during ultra-high plastic deformation with the addition of shear bands producing ultra-fine (60–200 nm) and nano-grains (20–50 nm). Furthermore, dislocation density was increased by a factor of 2.5 compared to the untreated material (29 × 10{sup 13} m{sup −2} vs. 12 × 10{sup 13} m{sup −2}). - Highlights: • LSPwC imparts high compressive residual stresses up to − 362 ± 31 MPa. • After LSPwC the microstructure is considerably refined via

  7. In-situ study of electromigration-induced grain rotation in Pb-free solder joint by synchrotron microdiffraction

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Kai; Tamura, Nobumichi; Tu, King-Ning

    2008-10-31

    The rotation of Sn grains in Pb-free flip chip solder joints hasn't been reported in literature so far although it has been observed in Sn strips. In this letter, we report the detailed study of the grain orientation evolution induced by electromigration by synchrotron based white beam X-ray microdiffraction. It is found that the grains in solder joint rotate more slowly than in Sn strip even under higher current density. On the other hand, based on our estimation, the reorientation of the grains in solder joints also results in the reduction of electric resistivity, similar to the case of Sn strip. We will also discuss the reason why the electric resistance decreases much more in strips than in the Sn-based solders, and the different driving force for the grain growth in solder joint and in thin film interconnect lines.

  8. Discrete tomographic reconstruction of 2D polycrystal orientation maps from X-ray diffraction projections using Gibbs priors

    DEFF Research Database (Denmark)

    Rodek, L.; Knudsen, E.; Poulsen, H.F.

    2005-01-01

    The determination of crystalline structures is a demanding and fundamental task of crystallography. This paper offers a new approach for rendering a 2D grain map of a polycrystal based on an orientation map reconstructed from X-ray diffraction patterns. The orientation map is produced by a Bayesian...

  9. Dynamical simulation of structural multiplicity in grain boundaries

    Energy Technology Data Exchange (ETDEWEB)

    Majid, I.; Bristowe, P.D.

    1987-06-01

    Work on a computer simulation study of a low-energy high-angle boundary structure which is not periodic have been recently reported. This result is of interest since grain boundary structures are usually assumed to have a periodicity corresponding to the appropriate coincidence site lattice (CSL) and many experimental observations of the structure of grain boundaries performed using conventional and high-resolution electron microscopy, electron diffraction and x-ray diffraction appear to support this work. However, this work, using empirical interatomic pair potentials and the relaxation method of molecular statics, have simulated a ..sigma.. = 5 36.87/sup 0/ (001) twist boundary and found a low energy structure having a larger repeat cell than the CSL and is composed of two different types of structural unit that are randomly distributed in the boundary plane. This result, which has been termed the multiplicity of grain boundary structures, has also been found in the simulation of tilt boundaries. The multiplicity phenomenon is of special interest in twist boundaries since it is used as a structural model to explain the x-ray scattering from a ..sigma.. = 5 boundary in gold. These scattering patterns had previously remained unexplained using stable structures that had simple CSL periodicity. Also, the effect of having a multiple number of low energy structural units coexisting in the grain boundary is of more general interest since it implies that the boundary structures may be quasi-periodic and, in some circumstances, may even result in a roughening of the boundary plane. This paper extends this work by showing, using molecular dynamics, that a multiplicity of structural units can actually nucleate spontaneously in a high-angle grain boundary at finite temperatures.

  10. Dynamical simulation of structural multiplicity in grain boundaries

    Science.gov (United States)

    Majid, I.; Bristowe, P. D.

    1987-06-01

    Work on a computer simulation study of a low-energy high-angle boundary structure which is not periodic have been recently reported. This result is of interest since grain boundary structures are usually assumed to have a periodicity corresponding to the appropriate coincidence site lattice (CSL) and many experimental observations of the structure of grain boundaries performed using conventional and high-resolution electron microscopy, electron diffraction and X-ray diffraction appear to support this work. However, this work, using empirical interatomic pair potentials and the relaxation method of molecular statics, have simulated a Sigma=5 (36.87 deg)(001) twist boundary and found a low energy structure having a larger repeat cell than the CSL and is composed of two different types of structural unit randomly distributed in the boundary plane. This result, termed the multiplicity of grain boundary structures, has also been found in the simulation of tilt boundaries. The multiplicity phenomenon is of special interest in twist boundaries since it is used as a structural model to explain the X-ray scattering from a Sigma=5 boundary in gold. These scattering patterns had previously remained unexplained using stable structures that had simple CSL periodicity. Also, the effect of having a multiple number of low energy structural units coexisting in the grain boundary is of more general interest since it implies that the boundary structures may be quasi-periodic and, in some circumstances, may even result in a roughening of the boundary plane. This work is extended by showing, using molecular dynamics, that a multiplicity of structural units can actually nucleate spontaneously in a high-angle grain boundary at finite temperatures.

  11. Grain refinement of cast zinc through magnesium inoculation: Characterisation and mechanism

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Zhilin; Qiu, Dong [School of Mechanical and Mining Engineering, The University of Queensland, Brisbane, QLD 4072 (Australia); Wang, Feng [School of Mechanical and Mining Engineering, The University of Queensland, Brisbane, QLD 4072 (Australia); BCAST, Brunel University, Uxbridge, Middlesex UB8 3PH (United Kingdom); Taylor, John A. [School of Mechanical and Mining Engineering, The University of Queensland, Brisbane, QLD 4072 (Australia); Zhang, Mingxing, E-mail: mingxing.zhang@uq.edu.au [School of Mechanical and Mining Engineering, The University of Queensland, Brisbane, QLD 4072 (Australia)

    2015-08-15

    It was previously found that peritectic-forming solutes are more favourable for the grain refinement of cast Al alloys than eutectic-forming solutes. In this work, we report that the eutectic-forming solute, Mg, can also significantly grain refine cast Zn. Differential thermal analysis (DTA) of a Zn–Mg alloy, in which efficient grain refinement occurred, evidenced an unexpected peak that appeared before the nucleation of η-Zn grains on the DTA spectrum. Based on extensive examination using X-ray diffraction, high resolution SEM and EDS, it was found that: (a) some faceted Zn–Mg intermetallic particles were reproducibly observed; (b) the particles were located at or near grain centres; (c) the atomic ratio of Mg to Zn in the intermetallic compound was determined to be around 1/2. Using tilting selected area diffraction (SAD) and convergent beam Kikuchi line diffraction pattern (CBKLDP) techniques, these faceted particles were identified as MgZn{sub 2} and an orientation relationship between such grain-centred MgZn{sub 2} particles and the η-Zn matrix was determined. Hence, the unexpected peak on the DTA spectrum is believed to correspond to the formation of MgZn{sub 2} particles, which act as effective heterogeneous nucleation sites in the alloy. Together with the effect of Mg solute on restricting grain growth, such heterogeneous nucleation is cooperatively responsible for the grain size reduction in Zn–Mg alloys. - Highlights: • A new eutectic-based grain refiner for the cast Zn was found. • The formation process of an intermetallic compound (MgZn{sub 2}) was characterised. • MgZn{sub 2} can act as potent heterogeneous nucleation sites above the liquidus. • A new OR between MgZn{sub 2} and η-Zn was determined using the CBKLDP technique.

  12. Diffraction Contrast Tomography: A Novel 3D Polycrystalline Grain Imaging Technique

    Energy Technology Data Exchange (ETDEWEB)

    Kuettner, Lindsey Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-06-06

    Diffraction contrast tomography (DCT) is a non-destructive way of imaging microstructures of polycrystalline materials such as metals or crystalline organics. It is a useful technique to map 3D grain structures as well as providing crystallographic information such as crystal orientation, grain shape, and strain. Understanding the internal microstructure of a material is important in understanding the bulk material properties. This report gives a general overview of the similar techniques, DCT data acquisition, and analysis processes. Following the short literature review, potential work and research at Los Alamos National Laboratory (LANL) is discussed.

  13. Orientation relationship between diamond and magnesiochromite inclusions

    Science.gov (United States)

    Alvaro, Matteo; Angel, Ross; Nimis, Paolo; Milani, Sula; Harris, Jeff; Nestola, Fabrizio

    2017-04-01

    partial orientation between inclusion and host. A (111) plane of each inclusion is sub-parallel to a {111} plane of their diamond host, but with random orientations of the magnesiochromite [100], [010] and [001] relative to the diamond. In one case, where a single inclusion comprised a magnesiochromite-olivine touching pair, the magnesiochromite was oriented as noted above and the olivine showed a random orientation. The implications of these observations for the mechanisms of diamond growth will be explored and the results will be compared and combined with previous work. This work was supported by ERC starting grant "INDIMEDEA" (307322) to F. Nestola and by the MIUR-SIR grant "MILE DEEp" (RBSI140351) to M. Alvaro. References Angel R. J. et al., J. Appl. Crystallogr. 48, 1330-1334 (2015). Wiggers de Vries D.F. et al., Contrib Mineral Petr 161, 565-579 (2011). Dobson D. P. et al., Nat. Geosci. 6, 575-578 (2013). Frank-Kamenetsky V.A. The nature of structural impurities and inclusions in minerals. Leningrad, Gos. Univ. (1964) Futergendler S.I. and Frank-Kamenetsky V.A. Zap Vsesoyuzn Mineral Obs 90, 230 (1961). Nestola F. et al., Int. Geol. Rev. 56(13), 1658-1667 (2014).

  14. Production of Seamless Superconducting Radio Frequency Cavities from Ultra-fine Grained Niobium, Phase II Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Roy Crooks, Ph.D., P.E.

    2009-10-31

    The positron and electron linacs of the International Linear Collider (ILC) will require over 14,000, nine-cell, one meter length, superconducting radio frequency (SRF) cavities [ILC Reference Design Report, 2007]. Manufacturing on this scale will benefit from more efficient fabrication methods. The current methods of fabricating SRF cavities involve deep drawing of the halves of each of the elliptical cells and joining them by high-vacuum, electron beam welding, with at least 19 circumferential welds per cavity. The welding is costly and has undesirable effects on the cavity surfaces, including grain-scale surface roughening at the weld seams. Hydroforming of seamless tubes avoids welding, but hydroforming of coarse-grained seamless tubes results in strain-induced surface roughening. Surface roughness limits accelerating fields, because asperities prematurely exceed the critical magnetic field and become normal conducting. This project explored the technical and economic feasibility of an improved processing method for seamless tubes for hydroforming. Severe deformation of bulk material was first used to produce a fine structure, followed by extrusion and flow-forming methods of tube making. Extrusion of the randomly oriented, fine-grained bulk material proceeded under largely steady-state conditions, and resulted in a uniform structure, which was found to be finer and more crystallographically random than standard (high purity) RRR niobium sheet metal. A 165 mm diameter billet of RRR grade niobium was processed into five, 150 mm I.D. tubes, each over 1.8 m in length, to meet the dimensions used by the DESY ILC hydroforming machine. Mechanical properties met specifications. Costs of prototype tube production were approximately twice the price of RRR niobium sheet, and are expected to be comparable with economies of scale. Hydroforming and superconducting testing will be pursued in subsequent collaborations with DESY and Fermilab. SRF Cavities are used to construct

  15. Randomization tests

    CERN Document Server

    Edgington, Eugene

    2007-01-01

    Statistical Tests That Do Not Require Random Sampling Randomization Tests Numerical Examples Randomization Tests and Nonrandom Samples The Prevalence of Nonrandom Samples in Experiments The Irrelevance of Random Samples for the Typical Experiment Generalizing from Nonrandom Samples Intelligibility Respect for the Validity of Randomization Tests Versatility Practicality Precursors of Randomization Tests Other Applications of Permutation Tests Questions and Exercises Notes References Randomized Experiments Unique Benefits of Experiments Experimentation without Mani

  16. Beta-Tin Grain Formation in Aluminum-Modified Lead-Free Solder Alloys

    Science.gov (United States)

    Reeve, Kathlene N.; Handwerker, Carol A.

    2018-01-01

    The limited number of independent β-Sn grain orientations that typically form during solidification of Sn-based solders and the resulting large β-Sn grain size have major effects on overall solder performance and reliability. This study analyzes whether additions of Al to Sn-Cu and Sn-Cu-Ag alloys can be used to change the grain size, morphology, and twinning structures of atomized (as-solidified) and re-melted (reflowed) β-Sn dendrites as determined using scanning electron microscopy and electron backscatter diffraction for as-solidified and reflow cycled (20-250°C, 1-5 cycles) Sn-Cu-Al and Sn-Ag-Cu-Al drip atomized spheres (260 μm diameter). The resulting microstructures were compared to as-solidified and reflow cycled Sn-Ag-Cu spheres (450 μm diameter) as well as as-solidified Sn-Ag-Cu, Sn-Cu, and Sn-Ag microstructures from the literature. Previous literature observations reporting reductions in undercooling and β-Sn grain size with Al micro-alloying additions could not be correlated to the presence of the Cu9Al4 phase or Al solute. The as-solidified spheres displayed no change in β-Sn dendrite structure or grain size when compared to non-Al-modified alloys, and the reflow cycled spheres produced high undercoolings (22-64°C), indicating a lack of potent nucleation sites. The current findings highlighted the role of Ag in the formation of the interlaced twinning structure and demonstrated that with deliberate compositional choices, formation of the alloy's β-Sn grain structure (cyclical twinning versus interlaced twinning) could be influenced, in both the as-solidified and reflow cycled states, though still not producing the fine-grain sizes and multiple orientations desired for improved thermomechanical properties.

  17. Bi-epitaxial template grain boundaries with different in-plane angles on (100) MgO substrates

    NARCIS (Netherlands)

    IJsselsteijn, R.P.J.; IJsselsteijn, R.P.J.; Hilgenkamp, Johannes W.M.; Eisenberg, M.; Eisenberg, M.; Vittoz, C.; Flokstra, Jakob; Rogalla, Horst

    1993-01-01

    Using laser ablation CeO2 and YBa2Cu3O7−d layers have been deposited on (100) oriented MgO substrates for the creation of bi-epitaxial grain boundary weak links. X-Ray Diffraction measurements were used to measure the (in-plane) orientations of the layers. The CeO2 layer has been structured using Ar

  18. Towards a new orientation

    DEFF Research Database (Denmark)

    Froulund Jensen, Janet; Overgaard, Dorthe; Bestle, Morten H

    2017-01-01

    AIMS AND OBJECTIVES: To describe the patient experience of ICU recovery from a longitudinal perspective by analysing follow-up consultations at three time-points. BACKGROUND: After a stay in the intensive care unit, patients risk physical and psychological problems during recovery. Follow-up after...... narrative of recovery was 'toward a trajectory of new orientation'. This narrative contained the chronological narratives of being 'at death's door', 'still not out of the woods' and 'on the road to recovery'. The road to recovery was described as downhill, steady-state or progressive. New orientation...... was obtained in steady-state or progressive recovery. CONCLUSIONS: This study provides a contemporary understanding of the process of intensive care recovery. Recovery evolves through narratives of mortal danger, risk of relapse and moving forward towards a new orientation in life. RELEVANCE TO CLINICAL...

  19. Future-Oriented LCA

    DEFF Research Database (Denmark)

    Olsen, Stig Irving; Borup, Mads; Andersen, Per Dannemand

    2017-01-01

    LCA is often applied for decision-making that concerns actions reaching near or far into the future. However, traditional life cycle assessment methodology must be adjusted for the prospective and change-oriented purposes, but no standardised way of doing this has emerged yet. In this chapter some...... challenges are described and some learnings are derived. Many of the future-oriented LCAs published so far perform relatively short-term prediction of simple comparisons. But for more long-term time horizons foresight methods can be of help. Scenarios established by qualified experts about future...... technological and economic developments are indispensable in future technology assessments. The uncertainties in future-oriented LCAs are to a large extent qualitative and it is important to emphasise that LCA of future technologies will provide a set of answers and not ‘the’ answer....

  20. Development of preferred orientation and microstructure in sheared quartzite: comparison of natural data and simulated results

    Science.gov (United States)

    Takeshita, Toru; Wenk, Hans-Rudolf; Lebensohn, Ricardo

    1999-11-01

    c-axis fabric and microstructures in a quartzite sample, sheared and extensively recrystallized under greenschist facies conditions, have been analyzed and compared with theoretical predictions using a viscoplastic self-consistent model modified to incorporate the effects of dynamic recrystallization. An asymmetric small-circle c-axis fabric about the finite shortening z-axis with a small half opening angle (35°) is present in the sample; it consists of four orientation components which are represented by host grain c-axis orientations (referred to as A, B, C and D): A and B are at high angles to the foliation plane, displaced against and with the sense of shear, respectively; C is in an intermediate direction between the Y- and Z-axis of finite strain, and D forms a subsidiary concentration around the intermediate strain ( Y-) axis. B- and C-grains are favorably oriented for basal (0001) and pyramid {10 1¯1} slip, respectively, and strongly deformed, while A- and D-grains are unfavorably oriented for the slip systems and little or moderately deformed. Some of A-grains are even fractured. The degree of dynamic recrystallization increases with increasing strain undergone by differently oriented grains (in the sequence of A-, D-, C- and B-grains). Microstructural evidence and theoretical predictions indicate that harder A-, C- and D-grains were significantly consumed by the grain boundary migration of the softer recrystallized B-component (although the consumption of A-grains was not really documented in the quartzite sample). The conclusion is supported by the fact that the B-component is much more dominant in the recrystallized than in the host c-axis fabric. Hence, the c-axis maximum nearly perpendicular to the shear plane and apparently displaced with the sense of shear commonly found in naturally sheared quartzites (correlated with the B-component) is presumably developed by the growth of soft orientations for basal (0001) slip by grain boundary migration at

  1. Grain size distribution in sheared polycrystals

    Science.gov (United States)

    Sarkar, Tanmoy; Biswas, Santidan; Chaudhuri, Pinaki; Sain, Anirban

    2017-12-01

    Plastic deformation in solids induced by external stresses is of both fundamental and practical interest. Using both phase field crystal modeling and molecular dynamics simulations, we study the shear response of monocomponent polycrystalline solids. We subject mesocale polycrystalline samples to constant strain rates in a planar Couette flow geometry for studying its plastic flow, in particular its grain deformation dynamics. As opposed to equilibrium solids where grain dynamics is mainly driven by thermal diffusion, external stress/strain induce a much higher level of grain deformation activity in the form of grain rotation, coalescence, and breakage, mediated by dislocations. Despite this, the grain size distribution of this driven system shows only a weak power-law correction to its equilibrium log-normal behavior. We interpret the grain reorganization dynamics using a stochastic model.

  2. Age and Value Orientations

    Directory of Open Access Journals (Sweden)

    Asya Kh. Kukubayeva

    2013-01-01

    Full Text Available The present article deals with value orientations and their role in men’s lives, particularly, in young people’s lives. This notion was introduced by the American theoretical sociologist T. Parsons, one of the creators of modern theoretical sociology. The scientist made an attempt to construct the structural and analytical theory of social action, combining personal interests (needs and aims and situation, it takes place in. The issue of value orientations remains acute for psychology. Herein we have considered several most important works, relating to the considered issue. Age aspects of young people’s value orientations are of peculiar interest to us. When analyzing this phenomenon, one should take into consideration the psychological formations, inhere for a certain age. In fact every age has its unique structure, which may change when passing from one development stage to another. Basing on this fact, we’ve considered the values, depending on the age features of the youth, relying upon the works of the scientists, working with different categories of the youth, such as: teenagers, students, children of different nationalities. It is not surprising that most scientists have come to the conclusion that the chief role in value orientation belongs to a family, originates in relations with parents and teachers. The positive reinforcement to the future develops throughout life in accordance with a lifestyle of a family, society and political situation in a state.Life orientations as a type of value orientations show different types of young people’s preferences. Value structure of its consciousness has its own specific character, depending on the age peculiarities. The dynamics of the transition from one age to another is accompanied with the reappraisal of values, eventually, influencing the life strategy of the future generation

  3. Contour fractal analysis of grains

    Science.gov (United States)

    Guida, Giulia; Casini, Francesca; Viggiani, Giulia MB

    2017-06-01

    Fractal analysis has been shown to be useful in image processing to characterise the shape and the grey-scale complexity in different applications spanning from electronic to medical engineering (e.g. [1]). Fractal analysis consists of several methods to assign a dimension and other fractal characteristics to a dataset describing geometric objects. Limited studies have been conducted on the application of fractal analysis to the classification of the shape characteristics of soil grains. The main objective of the work described in this paper is to obtain, from the results of systematic fractal analysis of artificial simple shapes, the characterization of the particle morphology at different scales. The long term objective of the research is to link the microscopic features of granular media with the mechanical behaviour observed in the laboratory and in situ.

  4. World grain takes a spill.

    Science.gov (United States)

    Brown, L R

    1992-01-01

    World grain production decreased 5% in 1991, which combined with the 90 million in population increase resulted in a 6.4% decline/person. This is the largest drop ever recorded. Currently world production is off 9% from the all time high in 1984 of 757 pounds/person. There are many signs that this trend will continue. Soil erosion continues to decrease the amount of available farm land, irrigation water logs fields, deforestation and desertification, air pollution, acid rain and increased ultra violet light form depleting ozone are all adding to the problem. Currently in the US 28 million acres idle as part of commodity supply management and 34 million acres are designated threatened and are in Conservation Reserve. However, even with this area put into production, the total area worldwide is still smaller than it was in 1984.

  5. Contour fractal analysis of grains

    Directory of Open Access Journals (Sweden)

    Guida Giulia

    2017-01-01

    Full Text Available Fractal analysis has been shown to be useful in image processing to characterise the shape and the grey-scale complexity in different applications spanning from electronic to medical engineering (e.g. [1]. Fractal analysis consists of several methods to assign a dimension and other fractal characteristics to a dataset describing geometric objects. Limited studies have been conducted on the application of fractal analysis to the classification of the shape characteristics of soil grains. The main objective of the work described in this paper is to obtain, from the results of systematic fractal analysis of artificial simple shapes, the characterization of the particle morphology at different scales. The long term objective of the research is to link the microscopic features of granular media with the mechanical behaviour observed in the laboratory and in situ.

  6. How resistive must grain boundaries in polycrystalline superconductors be, to limit J c?

    Science.gov (United States)

    Wang, Guanmei; Raine, Mark J.; Hampshire, Damian P.

    2017-10-01

    Although we can use misorientation angle to distinguish the grain boundaries that can carry high critical current density ({J}{{c}}) in high temperature superconductors (HTS) from those that cannot, there is no established normal state property equivalent. In this paper, we explore the superconducting and normal state properties of the grains and grain boundaries of polycrystalline YBa2Cu3O7-x (YBCO) using complementary magnetisation and transport measurements, and calculate how resistive grain boundaries must be to limit {J}{{c}} in polycrystalline superconductors. The average resistivity of the grain boundaries, {ρ }{{GB}}, in our micro- and nanocrystalline YBCO are 0.12 Ωm and 8.2 Ωm, values which are much higher than that of the grains ({ρ }{{G}}) and leads to huge {ρ }{{GB}}/{ρ }{{G}} values of 2 × 103 and 1.6 × 105 respectively. We find that the grain boundaries in our polycrystalline YBCO are sufficiently resistive that we can expect the transport {J}{{c}} to be several tens of orders of magnitude below the potential current density of the grains in our YBCO samples, as is found experimentally. Calculations presented show that increasing {J}{{c}} values by ˜2 orders of magnitude in high fields is still possible in all state-of-the-art technological high-field superconductors. We conclude: grain boundary engineering is unlikely to improve {J}{{c}} sufficiently in randomly aligned polycrystalline YBCO, to make it technologically useful for high-field applications; in low temperature superconducting intermetallics, such as Nb3Sn, large increases in {J}{{c}} may be achieved by completely removing the grain boundaries from these materials and, as is the case for thin films of Nb, Ba(FeCo)2As2 and HTS materials, by incorporating additional artificial pinning.

  7. Measuring market orientation: further evidence on Narver and Slater's three-component scale.

    Science.gov (United States)

    Chakrabarty, Subhra; Rogé, Joseph N

    2003-12-01

    A mail survey of a national random sample of 2,000 marketing managers was conducted. The data provided by 222 respondents were analyzed to assess the dimensionality of Narver and Slater's 15-item measure of market orientation. A confirmatory factor analysis, using LISREL 8.53, provided support for each of the separate dimensions of customer orientation, competitor orientation, and interfunctional coordination. However, a combined 3-factor model of market orientation was not supported. Directions for research are suggested.

  8. Annealing Characteristics of Ultrafine Grained Low-Carbon Steel Processed by Differential Speed Rolling Method

    Science.gov (United States)

    Hamad, Kotiba; Ko, Young Gun

    2016-05-01

    The annealing behavior of ultrafine grained ferrite in low-carbon steel (0.18 wt pct C) fabricated using a differential speed rolling (DSR) process was examined by observing the microstructural changes by electron backscatter diffraction and transmission electron microscopy. For this purpose, the samples processed by 4-pass DSR at a roll speed ratio of 1:4 for the lower and upper rolls, respectively, were annealed isochronally at temperatures ranging from 698 K to 898 K (425 °C to 625 °C) for 1 hour. The deformed samples exhibited a complex microstructure in the ferrite phase consisting of an equiaxed structure with a mean grain size of ~0.4 µm and a lamellar structure with a mean lamellar width of ~0.35 µm. The texture evolved during deformation was characterized by the rolling and shear components with specific orientations. After annealing at temperatures lower than 798 K (525 °C), the aspect ratio of the deformed grains tended to shift toward a unit corresponding to the equiaxed shape, whereas the grain size remained unchanged as the annealing temperature increased. At temperatures above 798 K (525 °C), however, some grains with a low dislocation density began to appear, suggesting that the starting temperature of static recrystallization in the severely deformed ferrite grains was 798 K (525 °C). The annealing texture of the present sample after heat treatment showed a uniform fiber texture consisting of α- and γ-components.

  9. Spatial Orientation in Flight

    Science.gov (United States)

    1993-11-01

    34 antigravity " muscles such as hip and knee extensors. These vestibular reflexes, of course, help keep the body upright with respect to the direction of...Vestibular-visual conflict need not even be in relation to motion but can be in relation to static orientation: some people become sick in " antigravity

  10. Social Workers’ Orientation Toward

    NARCIS (Netherlands)

    Deirdre Beneken genaamd Kolmer; René Schalk; Renske J.M. van der Zwet

    2014-01-01

    Objectives: This study assesses social workers’ orientation toward the evidence-based practice (EBP) process and explores which specific variables (e.g. age) are associated. Methods: Data were collected from 341 Dutch social workers through an online survey which included a Dutch translation of the

  11. Sexual Orientations in Perspective.

    Science.gov (United States)

    Garnets, Linda D.

    2002-01-01

    Discuess how sexuality is determined by multiple influences, including sociocutural factors. Presents a new paradigm that analyzes categories of human sexual behavior. A model of sexual orientation is presented that is based on multiplicity and examines overlapping identities and statuses of culture, age, race, ethnicity, class, and disability.…

  12. Managing Entrepreneurial Orientation

    NARCIS (Netherlands)

    S. van Doorn (Sebastiaan)

    2012-01-01

    textabstractIn this dissertation, we evaluate the roles senior management teams and individual middle managers play in realizing the performance benefits of entrepreneurial orientations. We investigate the role of senior management teams by focusing on a sample of 9.000 firms in the Netherlands. The

  13. Component-oriented programming

    NARCIS (Netherlands)

    Bosch, J; Szyperski, C; Weck, W; Buschmann, F; Buchmann, AP; Cilia, MA

    2003-01-01

    This report covers the eighth Workshop on Component-Oriented Programming (WCOP). WCOP has been affiliated with ECOOP since its inception in 1996. The report summarizes the contributions made by authors of accepted position papers as well as those made by all attendees of the workshop sessions.

  14. Supercube grains leading to a strong cube texture and a broad grain size distribution after recrystallization

    DEFF Research Database (Denmark)

    Lin, F.X.; Zhang, Y. B.; Pantleon, W.

    2015-01-01

    growth rates. However, most other cube grains do not grow preferentially. Because of the few supercube grains, the grain size distribution after recrystallization is broad. Reasons for the higher growth rates of supercube grains are discussed, and are related to the local deformed microstructure.......This work revisits the classical subject of recrystallization of cold-rolled copper. Two characterization techniques are combined: three-dimensional X-ray diffraction using synchrotron X-rays, which is used to measure the growth kinetics of individual grains in situ, and electron backscatter...... diffraction, which is used for statistical analysis of the microstructural evolution. As the most striking result, the strong cube texture after recrystallization is found to be related to a few super large cube grains, which were named supercube grains. These few supercube grains become large due to higher...

  15. Physical quality of grains subjected to moistening and drying processes for marketing

    Directory of Open Access Journals (Sweden)

    Paulo C. Coradi

    Full Text Available ABSTRACT The aim was to evaluate the physical quality of conventional and transgenic corn grains, through drying and wetting processes for marketing. The experimental design was completely randomized in a factorial scheme (7 x 3 x 2, corresponding to seven drying times (0, 20, 40, 60, 80, 100 and 120 min, three temperatures of the drying air (80, 100 and 120 °C and two hybrids of corn (conventional AG 1051 and transgenic Herculex@ 30S31H. Grain drying was held in convection oven with forced air ventilation while the wetting was done in a B.O.D chamber. The water movement in the grain, the volume and the electrical conductivity were evaluated periodically. The results showed that the transgenic corn grain reduced the negative effects of drying and moistening on the physical quality. The increase in drying air temperature accelerated the physical deterioration of conventional and transgenic corn grains. The increase in water content by the moistening process caused losses in grain physical quality, similar to the drying process, for both the conventional and transgenic corn grains.

  16. Evaluation of Agronomic Characteristics and Grain Yield Stability of Promising Lines of Rice in Guilan Province

    Directory of Open Access Journals (Sweden)

    A. R. Tarang

    2016-02-01

    Full Text Available This study was conducted to evaluate the quantitative and qualitative characteristics and grain yield stability of 10 promising lines of rice, compared to cultivar Khazar as the checking variety, in Rasht, Roudsar and Talesh cities of Guilan province, Iran, in three years. The experiment was conducted using a randomized complete block design with three replications. Characteristics such as grain yield, plant height, tiller number, panicle length, filled grain in panicle, 1000 grain weight, length, and shape of grain, days to 50% flowering and maturity, amylase content, gel consistency and gelatinization temperature were measured. The simple and combined analyses of variance were performed on grain yield data. Simple analysis of variance revealed significant differences within the genotypes. Results of combined analysis of variance indicated that there were significant differences among the grain yield of the genotypes in different years and locations. The interaction effects of location × year and location × genotype weren't significant; however, the interactions effects of genotype × location × year were significant. Stability analysis was also performed with Lin and Binns method. According to the stability analysis, lines no. 4, 7 and 8 were characterized as stable lines because of having low coefficient of variation and mean square within location. It seems, from our data, that appropriate breeding schemes based on hybridization and selection for these traits may bring about an improvement in cooking quality of rice.

  17. Analysis of grain size in FePt films fabricated using remote plasma deposition

    Science.gov (United States)

    Huskisson, D.; Zygridou, S.; Haigh, S. J.; Barton, C. W.; Nutter, P. W.; Thomson, T.

    2017-12-01

    Remote plasma sputtering (RPS) offers a high degree of control over the sputtering parameters used to deposit thin metallic films and has demonstrated a capability to control the media grain size distribution. Narrow grain size distributions remain a key requirement for future magnetic media. Here we report a comprehensive magnetometry, X-ray diffraction and transmission electron microscopy study of how RPS affects the grain size distribution of continuous, non-segregated L10 FePt thin films. These provide a model medium for heat-assisted magnetic recording and more generally for spintronic devices such as magnetoresistive random access memory and spin torque oscillators, where very high perpendicular magnetocrystalline anisotropy is required. Varying the target DC bias voltage, which in RPS can be tuned independently of the plasma generation, produces no meaningful, statistical change in average grain size, 6.5 ± 0.1 nm, for as-deposited, disordered FePt. Annealing at 800 °C creates the well-ordered L10 phase but results in an increased average grain size of 8.3-13.6 nm, and a significantly wider grain size distribution of 6.4-8.5 nm. These results show that whilst RPS is capable of producing well-ordered L10 FePt thin films, it does not offer an advantage in controlling the grain size of FePt, as reported in other thin film systems.

  18. Variability of grain weight per spike in wheat grown in different ecological conditions

    Directory of Open Access Journals (Sweden)

    Knežević Desimir

    2015-01-01

    Full Text Available Variability of grain weight spike-1 was studied in 10 wheat genotypes: 'Ana Morava', 'Julija Mono', 'Gruža', 'Kuna', 'Lasta', 'Balkan', 'Rodna', 'NS Rana 2', 'Partizanka', 'Pobeda', grown over three experimental years under different environmental factors. The experiment was set up as a randomized block design in three replications. Differences in the average values of grain weight spike-1 among tested cultivars were determined in all three years. On average, for all genotypes, grain weight spike-1 was highest (2.32g in the first experimental year (2005/06, and lowest (1.95g in the second year (2006/07. For all investigated wheat cultivars, in the third experimental year, the average value of grain weight spike-1 was 2.24g, while the total average value for all cultivars and three experimental years was 2.17g. 'Ana Morava' had the highest average values for grain weight spike-1 in all three experimental years, while the lowest grain weight spike-1 was obtained in 'Balkan' (1.81g in the second year 'Lasta' (1.40g and in the third experimental year 'Partizanka' ( 1.91 g. On average, 'Ana Morava' had the highest value (2.67g of grain weight spike-1, while the lowest average value (1.94g was recorded in 'Balkan'.

  19. ON ESTIMATION AND HYPOTHESIS TESTING OF THE GRAIN SIZE DISTRIBUTION BY THE SALTYKOV METHOD

    Directory of Open Access Journals (Sweden)

    Yuri Gulbin

    2011-05-01

    Full Text Available The paper considers the problem of validity of unfolding the grain size distribution with the back-substitution method. Due to the ill-conditioned nature of unfolding matrices, it is necessary to evaluate the accuracy and precision of parameter estimation and to verify the possibility of expected grain size distribution testing on the basis of intersection size histogram data. In order to review these questions, the computer modeling was used to compare size distributions obtained stereologically with those possessed by three-dimensional model aggregates of grains with a specified shape and random size. Results of simulations are reported and ways of improving the conventional stereological techniques are suggested. It is shown that new improvements in estimating and testing procedures enable grain size distributions to be unfolded more efficiently.

  20. Multi-model uncertainty analysis in predicting grain N for crop rotations in Europe

    DEFF Research Database (Denmark)

    Yin, Xiaogang; Kersebaum, Kurt C; Kollas, Chris

    2017-01-01

    simulating different treatments (catch crops, CO2 concentrations, irrigation, N application, residues and tillage) in four multi-year rotation experiments in Europe to assess modelling accuracy. Seven grain and seed crops in four rotation systems in Europe were included in the study, namely winter wheat......, winter barley, spring barley, spring oat, winter rye, pea and winter oilseed rape. Our results indicate that the higher level of calibration significantly increased the quality of the simulation for grain N. In addition, models performed better in predicting grain N of winter wheat, winter barley...... than a random single model. Models correctly simulated the effects of enhanced N input on grain N of winter wheat and winter barley, whereas effects of tillage and irrigation were less well estimated. However, the use of continuous simulation did not improve the simulations as compared to single year...

  1. Grain Unloading of Arsenic Species in Rice

    Energy Technology Data Exchange (ETDEWEB)

    Carey, Anne-Marie; Scheckel, Kirk G.; Lombi, Enzo; Newville, Matt; Choi, Yongseong; Norton, Gareth J.; Charnock, John M.; Feldmann, Joerg; Price, Adam H.; Meharg, Andrew A. (EPA); (U. South Australia); (Manchester); (Aberdeen); (UC)

    2010-01-11

    Rice (Oryza sativa) is the staple food for over half the world's population yet may represent a significant dietary source of inorganic arsenic (As), a nonthreshold, class 1 human carcinogen. Rice grain As is dominated by the inorganic species, and the organic species dimethylarsinic acid (DMA). To investigate how As species are unloaded into grain rice, panicles were excised during grain filling and hydroponically pulsed with arsenite, arsenate, glutathione-complexed As, or DMA. Total As concentrations in flag leaf, grain, and husk, were quantified by inductively coupled plasma mass spectroscopy and As speciation in the fresh grain was determined by x-ray absorption near-edge spectroscopy. The roles of phloem and xylem transport were investigated by applying a {+-} stem-girdling treatment to a second set of panicles, limiting phloem transport to the grain in panicles pulsed with arsenite or DMA. The results demonstrate that DMA is translocated to the rice grain with over an order magnitude greater efficiency than inorganic species and is more mobile than arsenite in both the phloem and the xylem. Phloem transport accounted for 90% of arsenite, and 55% of DMA, transport to the grain. Synchrotron x-ray fluorescence mapping and fluorescence microtomography revealed marked differences in the pattern of As unloading into the grain between DMA and arsenite-challenged grain. Arsenite was retained in the ovular vascular trace and DMA dispersed throughout the external grain parts and into the endosperm. This study also demonstrates that DMA speciation is altered in planta, potentially through complexation with thiols.

  2. Pebble orientation on large, experimental debris-flow deposits

    Science.gov (United States)

    Major, J.J.

    1998-01-01

    Replicable, pronounced orientation of discoid pebbles (??? 8 mm) embedded on surfaces of large (??? 10 m3) experimental debris-flow deposits reveals that strongly aligned, imbricate fabric can develop rapidly over short distances in mass flows. Pebble long axes aligned subparallel to deposit margins as well as subparallel to margins of surge waves arrested within the deposits. Pebble alignment exhibited modes both parallel to (a(p)), and normal to (a(t)), the primary flow direction; intermediate axes dipped preferentially inward from surge-wave margins (b(i) orientation). Repetitive development of margin-parallel, imbricate fabric distributed across deposit surfaces provides compelling evidence that deposits formed dominantly through progressive incremental accretion rather than through simple en masse emplacement. Pronounced fabric along deposit and arrested surge-wave margins reflects significant grain interaction along flow margins. This sedimentological evidence for significant marginal grain interaction complements theoretical analyses (Iverson, 1997) and other experimental data (Major, 1996: Iverson, 1997) that indicate that resistance along flow margins is an important factor affecting debris-flow deposition. The fabric on the experimental deposits demonstrates that debris flows can develop strongly imbricate particle orientation that mimics fabric developed during fluvial deposition. Particle shape and local stress fields appear to have more control over fabric development than does general depositional process. Other criteria in addition to particle orientation are needed to discriminate mass flow from fluvial gravel deposits and to unravel depositional history. ?? 1998 Elsevier Science B.V. All rights reserved.

  3. O(minus 2) grain boundary diffusion and grain growth in pure dense MgO

    Science.gov (United States)

    Kapadia, C. M.; Leipold, M. H.

    1973-01-01

    Grain growth behavior in fully dense compacts of MgO of very high purity was studied, and the results compared with other similar behaving materials. The activation energy for the intrinsic self-diffusion of Mg(2minus) is discussed along with the grain boundary diffusion of O(2minus). Grain boundary diffusion of O(2minus) is proposed as the controlling mechanism for grain growth.

  4. Plagioclase-Rich Itokawa Grains: Space Weathering, Exposure Ages, and Comparison to Lunar Soil Grains

    Science.gov (United States)

    Keller, L. P.; Berge, E.

    2017-01-01

    Regolith grains returned by the Hayabusa mission to asteroid 25143 Itokawa provide the only samples currently available to study the interaction of chondritic asteroidal material with the space weathering environment. Several studies have documented the surface alterations observed on the regolith grains, but most of these studies involved olivine because of its abundance. Here we focus on the rarer Itokawa plagioclase grains, in order to allow comparisons between Itokawa and lunar soil plagioclase grains for which an extensive data set exists.

  5. Test of the Additive-Dominance Model of grain weight and grain ...

    African Journals Online (AJOL)

    Two oat, parental genotypes, I.L82-1657 (pistillate) and 10589 Cn (staminate) with different grain weight characteristics were hybridized to obtain 6 backcross generations viz. P1, P2 ... However, additive gene effect was important in the control of all the grain weight variables except the primary: secondary grain yield ratio.

  6. Stabilisation of the grain market by the flexible use of grain for bioethanol

    NARCIS (Netherlands)

    Helming, J.F.M.; Pronk, A.; Woltjer, I.

    2010-01-01

    This report reviews whether the grain market and grain price can be stabilised by the variation of the use of grain in the EU-27's production of bioethanol. The time horizon of this study is 2020, whereby account is taken of the minimum 10% obligation for biofuel use in the EU-27. An economic

  7. Numerical Study of Variation of Mechanical Properties of a Binary Aluminum Alloy with Respect to Its Grain Shapes

    Directory of Open Access Journals (Sweden)

    Hamid Sharifi

    2014-04-01

    Full Text Available To study the variation of the mechanical behavior of binary aluminum copper alloys with respect to their microstructure, a numerical simulation of their granular structure was carried out. The microstructures are created by a repeated inclusion of some predefined basic grain shapes into a representative volume element until reaching a given volume percentage of the α-phase. Depending on the grain orientations, the coalescence of the grains can be performed. Different granular microstructures are created by using different basic grain shapes. Selecting a suitable set of basic grain shapes, the modeled microstructure exhibits a realistic aluminum alloy microstructure which can be adapted to a particular cooling condition. Our granular models are automatically converted to a finite element model. The effect of grain shapes and sizes on the variation of elastic modulus and plasticity of such a heterogeneous domain was investigated. Our results show that for a given α-phase fraction having different grain shapes and sizes, the elastic moduli and yield stresses are almost the same but the ultimate stress and elongation are more affected. Besides, we realized that the distribution of the θ phases inside the α phases is more important than the grain shape itself.

  8. Biomass and grain yield of oats by growth regulator

    Directory of Open Access Journals (Sweden)

    Anderson Marolli

    Full Text Available ABSTRACT The use of growth regulator in oats can reduce plant lodging with reflections in biomass and grain yield. The objective of the study was to determine the feasibility and efficiency of using Trinexapac-Ethyl regulator in the growth of white oat under different conditions of N-fertilizer and years favorable and unfavorable for cultivation. In this study, two experiments were conducted in the years 2011, 2012 and 2013, one for quantifying biomass production rate and the other for the determination of grain yield and lodging. The experimental design was randomized blocks with four replicates, in a 4 x 3 factorial scheme, for growth regulator doses (0, 200, 400 and 600 mL ha-1 and nitrogen doses (30, 90 and 150 kg ha-1, respectively. There is a linear reduction of biomass rate with the increase in the growth regulator dose in oat, regardless of the condition of year and use of N-fertilizer. The growth regulator dose of 495 mL ha-1 efficiently reduces lodging with reduced, high and very high use of N-fertilizer, without reducing the yield of oat grains, in favorable, intermediate or unfavorable year for cultivation.

  9. Goal Orientation Dan Subjective Well Being Pada Lansia

    OpenAIRE

    Desiningrum, Dinie Ratri

    2016-01-01

    This study aimed to examine the relationship between goal orientation and subjective well-being in the elderly, which includes psychological well-being, emotional well-being and social well-being. The research subjects consisted of 90 elderly from the elderly group Adi Yuswo and Wulandaru Semarang obtained through simple random sampling. The data were obtained using a measuring instrument goal orientation (18 items, α = .87), psychological well-being (33 items, α = .92), social well-being (33...

  10. Insect pest management in stored grain

    Science.gov (United States)

    Stored grain is vulnerable to attach by a variety of insect pests, that can generally be classified as external or internal feeders. Infestations primarily occur after grain is stored, though there is some evidence that infestations can occur in the field right before harvest. There are a variety of...

  11. Grain boundaries in high temperature superconductors

    NARCIS (Netherlands)

    Hilgenkamp, Johannes W.M.; Mannhart, J.

    2002-01-01

    Since the first days of high-Tc superconductivity, the materials science and the physics of grain boundaries in superconducting compounds have developed into fascinating fields of research. Unique electronic properties, different from those of the grain boundaries in conventional metallic

  12. Effect of grain boundary misorientation on discontinuous ...

    Indian Academy of Sciences (India)

    Administrator

    showed that the discontinuous precipitation (DP) reaction rate was dependent on the geometry of the grain boundary in ... 80% thickness reduction) had no effect on the frequency of special-grain boundaries. Keywords. AZ91 alloy .... increasing solute concentration, the influence of the ener- getics and kinetics is diminished ...

  13. Understanding Solidification Based Grain Refinement in Steels

    Science.gov (United States)

    2014-12-18

    can be modified to improve properties for grain refined steels. Tec finical Approach Grain size reduction is regularly practiced in steel mills...determine how small rare earth oxides are distributed in the steel. Since no examination of nano sized particles in the matrix was conducted in the

  14. Grain transport mechanics in shallow overland flow

    Science.gov (United States)

    A physical model based on continuum multiphase flow is described to represent saltating transport of grains in shallow overland flow. The two phase continuum flow of water and sediment considers coupled St.Venant type equations. The interactive cumulative effect of grains is incorporated by a disper...

  15. Grain transport mechanics in shallow flow

    Science.gov (United States)

    A physical model based on continuum multiphase flow is described to represent saltating transport of grains in shallow overland flows. The two-phase continuum flow of water and sediment considers coupled St.Venant type equations. The interactive cumulative effect of grains is incorporated by a dispe...

  16. Spinodal decomposition in fine grained materials

    Indian Academy of Sciences (India)

    We have used a phase field model to study spinodal decomposition in polycrystalline materials in which the grain size is of the same order of magnitude as the characteristic decomposition wavelength ( λ S D ). In the spirit of phase field models, each grain () in our model has an order parameter ( η i ) associated with it; ...

  17. Cobble cam: Grain-size measurements of sand to boulder from digital photographs and autocorrelation analyses

    Science.gov (United States)

    Warrick, J.A.; Rubin, D.M.; Ruggiero, P.; Harney, J.N.; Draut, A.E.; Buscombe, D.

    2009-01-01

    A new application of the autocorrelation grain size analysis technique for mixed to coarse sediment settings has been investigated. Photographs of sand- to boulder-sized sediment along the Elwha River delta beach were taken from approximately 1??2 m above the ground surface, and detailed grain size measurements were made from 32 of these sites for calibration and validation. Digital photographs were found to provide accurate estimates of the long and intermediate axes of the surface sediment (r2 > 0??98), but poor estimates of the short axes (r2 = 0??68), suggesting that these short axes were naturally oriented in the vertical dimension. The autocorrelation method was successfully applied resulting in total irreducible error of 14% over a range of mean grain sizes of 1 to 200 mm. Compared with reported edge and object-detection results, it is noted that the autocorrelation method presented here has lower error and can be applied to a much broader range of mean grain sizes without altering the physical set-up of the camera (~200-fold versus ~6-fold). The approach is considerably less sensitive to lighting conditions than object-detection methods, although autocorrelation estimates do improve when measures are taken to shade sediments from direct sunlight. The effects of wet and dry conditions are also evaluated and discussed. The technique provides an estimate of grain size sorting from the easily calculated autocorrelation standard error, which is correlated with the graphical standard deviation at an r2 of 0??69. The technique is transferable to other sites when calibrated with linear corrections based on photo-based measurements, as shown by excellent grain-size analysis results (r2 = 0??97, irreducible error = 16%) from samples from the mixed grain size beaches of Kachemak Bay, Alaska. Thus, a method has been developed to measure mean grain size and sorting properties of coarse sediments. ?? 2009 John Wiley & Sons, Ltd.

  18. Fabricación de compuesto de matriz epoxi reforzado con fibras largas de henequén orientadas aleatoriamente//Fabrication of a composite with epoxy matrix and henequen fibers as reinforcement long and with random orientation

    Directory of Open Access Journals (Sweden)

    Angel A. Rodríguez Soto

    2015-05-01

    Full Text Available Se obtuvo el procedimiento para la fabricación de un material compuesto con matriz de epoxi reforzado con fibras de henequén largas orientadas aleatoriamente. Fueron diseñados y elaborados seis moldes de tipo caja para la fabricación por el método de prensado en frío. Se produjeron 37 placas con 0, 6, 9, 12, 16, 22, 26 y 28 % de fibras en relación másica. La inclusión de los refuerzos fue manual y los materiales fabricados se sometieron a un proceso de cura a 70 ºC por 24 horas. Los especímenes obtenidos presentaron buena calidad estando libres de defectos y asegurando la distribución correcta de las fibras. El método de fabricación es adecuado para placas con pequeñas y grandes cantidades de fibra.Palabras claves: plásticos reforzados con fibras (PRF, fibras vegetales, compuesto de matriz termoestable, moldeo por compresión en frío.______________________________________________________________________________AbstractIs presented a procedure for the fabrication of the composite material with epoxy as matrix reinforced with henequen fibers, long and random. Was designed and fabricated six molds of box type for the manufacture of the plates using cold pressing procedure. Was make 37 plates with 0, 6, 9, 12, 16, 22, 26 and 28 % of fiber´s inclusions in mass relation. The inclusion of the reinforcements was making manually and the obtained materials was submitted to a process of cure bellow 70ºC during 24 hours. The obtained specimens showed a good quality being free of defects and guarantee the correct distribution of the fibers. The fabrication method is de adequate for plates with small and large quantities of fiber.Key words: fiber reinforced plastics (FRP, natural fibers, composite with thermoset matrix, cold compression molded.

  19. 76 FR 12400 - WTO Dispute Settlement Proceeding Regarding China-Countervailing and Anti-Dumping Duties on Grain...

    Science.gov (United States)

    2011-03-07

    ... TRADE REPRESENTATIVE WTO Dispute Settlement Proceeding Regarding China--Countervailing and Anti-Dumping... countervailing and anti-dumping duties on Grain Oriented Flat-rolled Electrical Steel (``GOES'') from the United... measures imposing countervailing duties and anti-dumping duties on GOES from the United States are...

  20. Quantification of local and global elastic anisotropy in ultrafine grained gradient microstructures, produced by linear flow splitting

    DEFF Research Database (Denmark)

    Niehuesbernd, Jörn; Müller, Clemens; Pantleon, Wolfgang

    2013-01-01

    . The local grain orientations determined by EBSD measurements were used to calculate the elastic tensors at several positions along the strain gradient. Based on the geometric mean, the calculated local elastic constants were transferred into global ones by appropriate weighting. Ultrasonic measurements were...

  1. Random sequential adsorption of cubes.

    Science.gov (United States)

    Cieśla, Michał; Kubala, Piotr

    2018-01-14

    Random packings built of cubes are studied numerically using a random sequential adsorption algorithm. To compare the obtained results with previous reports, three different models of cube orientation sampling were used. Also, three different cube-cube intersection algorithms were tested to find the most efficient one. The study focuses on the mean saturated packing fraction as well as kinetics of packing growth. Microstructural properties of packings were analyzed using density autocorrelation function.

  2. Spatial orientation in Japanese quails (Coturnix coturnix japonica.

    Directory of Open Access Journals (Sweden)

    Tim Ruploh

    Full Text Available Finding a given location can be based on a variety of strategies, for example on the estimation of spatial relations between landmarks, called spatial orientation. In galliform birds, spatial orientation has been demonstrated convincingly in very young domestic chicks. We wanted to know whether adult Japanese quails (Coturnix coturnix japonica without food deprivation are also able to use spatial orientation. The quails had to learn the relation of a food location with four conspicuous landmarks which were placed in the corners of a square shaped arena. They were trained to find mealworms in three adjacent food cups in a circle of 20 such cups. The rewarded feeders were located during training between the same two landmarks each of which showed a distinct pattern. When the birds had learned the task, all landmarks were displaced clockwise by 90 degrees. When tested in the new situation, all birds redirected their choices with respect to the landmark shift. In subsequent tests, however, the previously correct position was also chosen. According to our results, quails are using conspicuous landmarks as a first choice for orientation. The orientation towards the previously rewarded location, however, indicates that the neuronal representation of space which is used by the birds also includes more fine grain, less conspicuous cues, which are probably also taken into account in uncertain situations. We also presume that the rare orientation towards never rewarded feeders may be due to a foraging strategy instead of being mistakes.

  3. Grain Boundary Engineering of Electrodeposited Thin Films

    DEFF Research Database (Denmark)

    Alimadadi, Hossein

    of the favorable boundaries that break the network of general grain boundaries. Successful dedicated synthesis of a textured nickel film fulfilling the requirements of grain boundary engineered materials, suggests improved boundary specific properties. However, the textured nickel film shows fairly low......Grain boundary engineering aims for a deliberate manipulation of the grain boundary characteristics to improve the properties of polycrystalline materials. Despite the emergence of some successful industrial applications, the mechanism(s) by which the boundary specific properties can be improved...... to engineer new materials. In this study, one of the most widely used electrolytes for electrodeposition is chosen for the synthesis of nickel films and based on thorough characterization of the boundaries the potentials in grain boundary engineering are outlined. The internal structure of the nickel films...

  4. Planar defects and grain-boundary disclinations in the superconducting compund YBaCuO

    Energy Technology Data Exchange (ETDEWEB)

    Sadanov, E.V.; Ksenofontov, V.A. ( Khar' kovskii Fiziko-Tekhnicheskii Institut, Kharkov (Ukrainian SSR))

    1989-08-01

    Planar defects separating variously oriented regions of the crystal were observed in the structure of the YBa2Cu3O(7-x) high-temperature superconductor. Also observed were rotation-type linear grain-boundary defects, which were centers of the elastic perturbation of the lattice. Both types of defects can have a substantial effect on the energy properties of superconducting materials. 5 refs.

  5. Review- Magnetic orientation and magnetic anisotropy in paramagnetic layered oxides containing rare-earth ions

    Directory of Open Access Journals (Sweden)

    Shigeru Horii, Atsushi Ishihara, Takayuki Fukushima, Tetsuo Uchikoshi, Hiraku Ogino, Tohru S Suzuki, Yoshio Sakka, Jun-ichi Shimoyama and Kohji Kishio

    2009-01-01

    Full Text Available The magnetic anisotropies and easy axes of magnetization at room temperature were determined, and the effects of rare-earth (RE ions were clarified for RE-based cuprates, RE-doped bismuth-based cuprates and RE-doped Bi-based cobaltite regarding the grain orientation by magnetic field. The easy axis, determined from the powder orientation in a static field of 10 T, depended qualitatively on the type of RE ion for all three systems. On the other hand, the magnetization measurement of the c-axis oriented powders, aligned in static or rotating fields, revealed that the type of RE ion strongly affected not only the directions of the easy axis but also the absolute value of magnetic anisotropy, and an appropriate choice of RE ion is required to minimize the magnetic field used for grain orientation. We also studied the possibility of triaxial grain orientation in high-critical-temperature superconductors by a modulated oval magnetic field. In particular, triaxial orientation was attempted in a high-oxygen-pressure phase of orthorhombic RE-based cuprates Y2Ba4Cu7Oy. Although the experiment was performed in epoxy resin, which is not practical, in-plane alignment within 3° was achieved.

  6. Surface roughness and grain boundary scattering effects on the electrical conductivity of thin films

    NARCIS (Netherlands)

    Palasantzas, George

    1998-01-01

    In this work, we investigate surface/interface roughness and grain boundary scattering effects on the electrical conductivity of polycrystalline thin films in the Born approximation. We assume for simplicity a random Gaussian roughness convoluted with a domain size distribution ~e^-πr^2/ζ^2 to

  7. Effect of Sorghum -Barley Brewer's Spent Grain as a Feed Ingredient ...

    African Journals Online (AJOL)

    The objective of the study was to determine if the inclusion of Sorghum-Barley Brewer's Spent Grain (SBBSG) in broiler diets will affect growth performance and carcass characteristics. A total of 380 Ross broiler chicks were brooded on a common diet without SBBSG for 28 days after which they were randomly assigned to ...

  8. The effect of grain type and processing on chewing activity in horses

    DEFF Research Database (Denmark)

    Brøkner, Christine; Nørgaard, Peder; Eriksen, Lis

    2005-01-01

    The aims of the present experiment were to study the effect of grain type and processing on chewing activity in horses. Three adult trotters (Exp.I) and 3 adult Icelandic horses (Exp.II) were fed 3 daily meals during 3 consecutive days in two 3 x 3 completely randomized block design experiments...

  9. Columns formed by multiple twinning in nickel layers—An approach of grain boundary engineering by electrodeposition

    DEFF Research Database (Denmark)

    Alimadadi, Hossein; da Silva Fanta, Alice Bastos; Somers, Marcel A. J.

    2013-01-01

    Complementary microscopic and diffraction based methods revealed a peculiar microstructure of electrodeposited nickel. For the as-deposited layer, thus, without any additional treatment, multiple twinning yields a high population of Σ3n boundaries, which interrupts the network of normal high angle...... grain boundaries. A peculiar arrangement of Σ3 boundaries forming five-fold junctions is observed. The resulting microstructure meets the requirements for grain boundary engineering. Twinning induced effects on the crystallographic orientation of grains result in one major texture component being a ⟨210......⟩ fiber axis and additional minor orientations originating from first and second generation twins of ⟨210⟩, i.e., ⟨542⟩ and ⟨20 2 1⟩....

  10. Two-pulse laser control for selective photofragment orientation

    DEFF Research Database (Denmark)

    Machholm, Mette; Henriksen, Niels Engholm

    1999-01-01

    The nuclear wave packet dynamics in the potential well of a bound molecule can be controlled by an intense infrared (IR)-laser pulse. The phase of the nuclear wave packet motion is shown to depend on the phase of the laser field and the initial orientation of the molecule. We demonstrate......, for diatomic heteronuclear molecules, that these spatial effects can be used to control the angular distribution of photofragments by selective dissociation of molecules with a given initial orientation from a sample of randomly oriented molecules. (C) 1999 American Institute of Physics. [S0021-9606(99)01131-9]....

  11. Flight calls and orientation

    DEFF Research Database (Denmark)

    Larsen, Ole Næsbye; Andersen, Bent Bach; Kropp, Wibke

    2008-01-01

    flight calls was simulated by sequential computer controlled activation of five loudspeakers placed in a linear array perpendicular to the bird's migration course. The bird responded to this stimulation by changing its migratory course in the direction of that of the ‘flying conspecifics' but after about...... 30 minutes it drifted back to its original migration course. The results suggest that songbirds migrating alone at night can use the flight calls from conspecifics as additional cues for orientation and that they may compare this information with other cues to decide what course to keep.......  In a pilot experiment a European Robin, Erithacus rubecula, expressing migratory restlessness with a stable orientation, was video filmed in the dark with an infrared camera and its directional migratory activity was recorded. The flight overhead of migrating conspecifics uttering nocturnal...

  12. Value oriented strategic marketing

    Directory of Open Access Journals (Sweden)

    Milisavljević Momčilo

    2013-01-01

    Full Text Available Changes in today's business environment require companies to orient to strategic marketing. The company accepting strategic marketing has a proactive approach and focus on continuous review and reappraisal of existing and seeking new strategic business areas. Difficulties in achieving target profit and growth require turning marketing from the dominant viewpoint of the tangible product to creating superior value and developing relationships with customers. Value orientation implies gaining competitive advantage through continuous research and understanding of what value represents to the consumers and discovering new ways to meet their required values. Strategic marketing investment requires that the investment in the creation of values should be regularly reviewed in order to ensure a focus on customers with high profit potential and environmental value. This increases customer satisfaction and retention and long-term return on investment of companies.

  13. Effect of Drought Stress at Pre and Post-anthesis on Dry Matter Accumulation of Grains in Irrigated Winter Wheat

    Directory of Open Access Journals (Sweden)

    Sh. Elyasi

    2011-01-01

    Full Text Available Investigating assimilate contribution and grain filling pattern in winter wheat is importance under drought stress condition. This study was conducted to evaluate the relationship between drought stress on grain filling and yield of 4 cultivars including MV17 (dwarf, Alvand, Shahryar (semi-dwarf and Toos (tall. Experimental design was randomized complete block with three replications. Drought stress assigned to main plots and cultivars to sub plots. Growth curve sampling started at 7 days after anthesis with 4 days interval. In pre-anthesis drought stress Alvand produced highest yield, while it was 29.14% less than control treatment. The yield of Toos cultivar was lowest at pre-anthesis drought stress. Rate of grain filling of Toos cultivar did not change at pre-anthesis drought stress. Drought stress treatment at post-anthesis decreased rate of grain filling in all cultivars as compared to control, but it was significant only Toos c.v. In pre-anthesis drought stress grain filling duration increased in Alvand but decreased in Toos. Alvand with higher rate of grain filling produced highest grain yield (3850 kg/ha. It can be concluded that, drought stress decreases grain filling duration and rate of grain filling.

  14. Aspect-Oriented Programming

    Science.gov (United States)

    Elrad, Tzilla (Editor); Filman, Robert E. (Editor); Bader, Atef (Editor)

    2001-01-01

    Computer science has experienced an evolution in programming languages and systems from the crude assembly and machine codes of the earliest computers through concepts such as formula translation, procedural programming, structured programming, functional programming, logic programming, and programming with abstract data types. Each of these steps in programming technology has advanced our ability to achieve clear separation of concerns at the source code level. Currently, the dominant programming paradigm is object-oriented programming - the idea that one builds a software system by decomposing a problem into objects and then writing the code of those objects. Such objects abstract together behavior and data into a single conceptual and physical entity. Object-orientation is reflected in the entire spectrum of current software development methodologies and tools - we have OO methodologies, analysis and design tools, and OO programming languages. Writing complex applications such as graphical user interfaces, operating systems, and distributed applications while maintaining comprehensible source code has been made possible with OOP. Success at developing simpler systems leads to aspirations for greater complexity. Object orientation is a clever idea, but has certain limitations. We are now seeing that many requirements do not decompose neatly into behavior centered on a single locus. Object technology has difficulty localizing concerns invoking global constraints and pandemic behaviors, appropriately segregating concerns, and applying domain-specific knowledge. Post-object programming (POP) mechanisms that look to increase the expressiveness of the OO paradigm are a fertile arena for current research. Examples of POP technologies include domain-specific languages, generative programming, generic programming, constraint languages, reflection and metaprogramming, feature-oriented development, views/viewpoints, and asynchronous message brokering. (Czarneclu and

  15. Oriented Fiber Filter Media

    OpenAIRE

    R. Bharadwaj; A. Patel, S. Chokdeepanich, Ph.D.; G.G. Chase, Ph.D.

    2008-01-01

    Coalescing filters are widely used throughout industry and improved performance will reduce droplet emissions and operating costs. Experimental observations show orientation of micro fibers in filter media effect the permeability and the separation efficiency of the filter media. In this work two methods are used to align the fibers to alter the filter structure. The results show that axially aligned fiber media improve quality factor on the order of 20% and cutting media on an angle from a t...

  16. Club d'orientation

    CERN Multimedia

    Club d'orientation

    2014-01-01

    Courses d’orientation ce printemps Le Club d’orientation du CERN vous invite à venir découvrir la course d’orientation et vous propose, en partenariat avec d’autres clubs de la région, une dizaine de courses populaires. Celles-ci ont lieu les samedis après-midi, elles sont ouvertes à tous, quel que soit le niveau, du débutant au sportif confirmé, en famille ou en individuel, en promenade ou en course. Si vous êtes débutant vous pouvez profiter d’une petite initiation offerte par l’organisateur avant de vous lancer sur un parcours. Divers types de parcours sont à votre choix lors de chaque épreuve: facile court (2-3 km), facile moyen (3-5 km), technique court (3-4 km), technique moyen (4-5 km) et technique long (5-7 km). Les dates à retenir sont les suivantes pour la coupe genevoise de printemps: Samedi 22 mars: Apples (...

  17. Short Communication. Effect of phosphorus nutrition and grain position within maize cob on grain phosphorus accumulation

    Directory of Open Access Journals (Sweden)

    Muhamamad Nadeem

    2014-04-01

    Full Text Available Nutritional status of grains may vary due to external nutrient supply and their position within parent maize cob. Phosphorus (P is the least mobile nutrient in the soil and therefore newly growing seedlings are largely dependent on the stored grain P contents which are accumulated during the crop maturity period. Objective of this study was to access the effects of different P applications and grain positions on P and dry matter contents in grains. Phosphorus application and grain position has significant (p<0.05 effects on P contents in grains whereas dry weight and P content are highly correlated. Grain weight and P contents decreased linearly from base to apical position possibly due to flow of nutrients from base towards apical position within cob. Significantly higher grain dry weight (0.35±0.01 g and P contents (962±57 µg P are recorded in high P application (92.50 kg ha-1 rate on base position whereas minimum grain dry weight (0.14±0.01 g and P contents (219±11 µg P were recorded on apical grain position in low P application (5.60 kg ha-1 rate. The results suggest that for better seedling P nutrition especially in soils of low inherent P, maize grains should be selected from base or middle position where maximum dry weight and P contents are concentrated to support the seedlings to reach at growth at which roots are capable of external P uptake.

  18. Nanoscale grain growth behaviour of CoAl intermetallic synthesized ...

    Indian Academy of Sciences (India)

    The results of isothermal annealing showed that the grain growth behaviour can be explained by the parabolic grain growth law. The grains were at nanometric scale after isothermal annealing up to 0.7 m. The grain growth exponent remained constant above 873 K indicating that grain growth mechanism does not change ...

  19. A constitutive model of nanocrystalline metals based on competing grain boundary and grain interior deformation mechanisms

    KAUST Repository

    Gurses, Ercan

    2011-12-01

    In this work, a viscoplastic constitutive model for nanocrystalline metals is presented. The model is based on competing grain boundary and grain interior deformation mechanisms. In particular, inelastic deformations caused by grain boundary diffusion, grain boundary sliding and dislocation activities are considered. Effects of pressure on the grain boundary diffusion and sliding mechanisms are taken into account. Furthermore, the influence of grain size distribution on macroscopic response is studied. The model is shown to capture the fundamental mechanical characteristics of nanocrystalline metals. These include grain size dependence of the strength, i.e., both the traditional and the inverse Hall-Petch effects, the tension-compression asymmetry and the enhanced rate sensitivity. © 2011 Elsevier B.V. All rights reserved.

  20. Automated grain size measurements from airborne remote sensing for long profile measurements of fluvial grain sizes

    Science.gov (United States)

    Carbonneau, Patrice E.; Bergeron, Normand; Lane, Stuart N.

    2005-11-01

    Recent research has demonstrated that image processing can be applied to derive surficial median grain size data automatically from high-resolution airborne digital imagery in fluvial environments. However, at the present time, automated grain size measurement is limited to the dry exposed bed areas of the channel. This paper shows that the application area of automated grain size mapping can be extended in order to include the shallow wetted areas of the channel. The paper then proceeds to illustrate how automated grain size measurement in both dry and shallow wetted areas can be used to measure grain sizes automatically for long river lengths. For the present study, this results in a median grain size profile covering an 80 km long river which is constructed from over three million automated grain size measurements.