WorldWideScience

Sample records for raios-x na borda

  1. Determinação das fases na difração dos raios-X usando difração multipla de mais de tres-feixes

    OpenAIRE

    Jose Marcos Sasaki

    1988-01-01

    Resumo: O problema da fase dos feixes de raios-X difratados é um dos maiores problemas da Cristalografia de Raios-X desde a descoberta de Laue e a resolução das primeiras estrutura por Bragg. Neste trabalho é desenvolvido um método teórico, baseado na teoria dinâmica de difração dos raios-X, para análise da intensidade de difração múltipla com o objetivo de obter informações sobre as fases num caso de difração múltipla de N-feixes com N > 3. Faz-se uso de comprimento de onda acima da borda de...

  2. Determinação direta das fases na difração de raios-X em cristais sem centro de simetria

    OpenAIRE

    Jose Antonio Prado Valladares

    1984-01-01

    Resumo: Um método experimental é proposto para solucionar o problema da fase na difração de raios-X em cristais sem centro de simetria, usando difração múltipla caso três-feixes tipo-Bragg. Este método resulta da consideração da dependência da fase com a assimetria dos perfis de linha, com o sentido da rotação da rede cristalina e com o comprimento de onda da radiação incidente. Casos em que o comprimento de onda da radiação incidente está acima e abaixo da borda de absorção, lE, do átomo mai...

  3. Estudo espectral em raios-X duros de fontes do tipo Z com o HEXTE/RXTE

    Science.gov (United States)

    D'Amico, F.; Heindl, W. A.; Rothschild, R. E.

    2003-08-01

    Apresentam-se os resultados de um estudo espectral em raios-X de fontes do tipo Z. As fontes do tipo Z são binárias de raios-X de baixa massa (BXBM) com campo magnético intermediário (B~109G). Esta classe de fontes é composta por apenas 6 fontes Galácticas (a saber: ScoX-1, 9, 7, CygX-2, 5 e 0). A nossa análise se concentra na faixa de raios-X duros (E ~ 20keV), até cerca de 200keV, faixa ótima de operação do telescópio "High Energy X-ray Timing Experiment" (HEXTE), um dos três telescópios de raios-X à bordo do Rossi X-ray Timing Explorer (RXTE). Nossa motivação para tal estudo, uma busca de caudas em raios-X duros em fontes do tipo Z, foi o pouco conhecimento sobre a emissão nesta faixa de energia das referidas fontes quando comparadas, por exemplo, as fontes do tipo atoll (também BXBM). Apresentam-se a análise/redução de dados e explicita-se a maneira como o HEXTE mede o ru1do de fundo. Especial atenção é direcionada a este item devido a localização das fontes do tipo Z e também ao problema de contaminação por fontes próximas. Com exceção de ScoX-1, nenhuma cauda em raios-X duros foi encontrada para as outras fontes, a despeito de resultados de detecção dessas caudas em algumas fontes pelo satélite BeppoSAX. As interpretações deste resultado serão apresentadas. Do ponto de vista deste estudo, nós deduzimos que a produção de caudas de raios-X duros em fontes do tipo Z é um processo disparado quando, pelo menos, uma condição é satisfeita: o brilho da componente térmica do espectro precisa estar acima de um certo valor limiar de ~4´1036ergs-1.

  4. Desenvolvimento das câmeras de raios-X duros do satélite MIRAX

    Science.gov (United States)

    Braga, J.; Rothschild, R.; Staubert, R.; Heise, J.; Remillard, R.; D'Amico, F.; Jablonski, F.; Mejía, J.; Carvalho, H.; Heindl, B.; Matteson, J.; Kendziorra, E.; Wilms, J.; in't Zand, J.; Kuulkers, E.

    2003-08-01

    O MIRAX (Monitor e Imageador de RAios-X) é um projeto de desenvolvimento de um pequeno satélite astronômico de raios-X (~200 kg, ~240 W). A estratégia básica da missão será observar continuamente (~9 meses por ano) a região central (~1000 graus2) do plano Galáctico e realizar estudos espectroscópicos de banda larga (2-200 keV) e alta sensibilidade de um grande conjunto de fontes através de imagens com resolução de ~6'. Isso proporcionará uma cobertura inédita do "espaço de descobertas" através da detecção, localização, identificação e estudo detalhado de fenômenos imprevisíveis, tais como transientes fracos de raios-X, novas rápidas de raios-X e bursts de raios gama, assim como o estudo de fontes com emissão persistente. Neste trabalho apresentamos o projeto das duas câmeras de raios-X duros (CXDs) do MIRAX, que irão operar na faixa de 10 a 200 keV. Cada CXD consistirá de um plano de detectores CZT (Cd0,9Zn0,1Te) de 0,5 mm de resolução espacial e 370 cm2 de área total, e de uma máscara codificada com elementos quadrados de 1,3 mm de lado e 0,5 cm de espessura. A máscara terá dimensões de 315 cm ´ 275 cm e será montada a 700 cm de distância dos detectores. Com essa configuração as CXDs terão 6' de resolução angular e, quando colocadas a um ângulo de 29° entre si, as duas câmeras propiciam um campo totalmente codificado de 39° ´ 6°12' e um campo total de 76° ´ 44°. Serão apresentadas simulações de observações da região do plano Galáctico com o conjunto formado pelas duas CXDs.

  5. Fontes binárias supermoles de raios X

    Science.gov (United States)

    Pires, A. M.; Janot Pacheco, E.

    2003-08-01

    Estuda-se as características físicas das fontes supermoles (de raios X (SSS), utilizando dados ópticos e em altas energias, no âmbito de um trabalho de IC. Trata-se de binárias que apresentam espectro X muito mole, baixas temperaturas e altas luminosidades bolométricas. Esse sistemas são compostos por uma anã branca realizando fusão em sua superfície, a partir de matéria perdida pela estrela companheira. Os resíduos de fusão se acumulam na superfície da anã branca, e essa pode ultrapassar o limite de Chadrasekhar, produzir um colapso gravitacional, sendo esse um dos cenários propostos para as explosões de SN Ia. Apresentamos nesta comunicação o estado da arte das características físicas das fontes SSS, situando-as no âmbito das VCs. Procuramos também situar esses objetos em relação às variáveis galácticas V Sge, na medida em que os dois grupos apresentam certas caracerísticas bastante semelhantes.A metodologia adotada é aquela pedagógico-cognitiva clássica de um trabalho de IC na área de ciências exatas.

  6. A estabilidade dos PAHS em função da energia da radiação interestelar nas faixas UV e raios-X

    Science.gov (United States)

    Pinotti, R.; Costa, R. K.; Boechat-Roberty, H. M.; Lago, A.; Souza, G. B.

    2003-08-01

    A nebulosa CRL 618, uma proto-nebulosa planetária cuja nuvem molecular espessa envolve uma estrela B0, contém uma grande quantidade de C2H2 e CH4. Estas moléculas são consideradas os tijolos da criação de grandes moléculas carbonadas como os Hidrocarbonetos Policíclicos Aromáticos (PAHs). Esta nebulosa, por estar exposta a intensos campos de UV e Raios-X, é uma região de fotodissociação molecular que propicia a formação de novas moléculas, confirmada pela presença de C4H2 e C6H6 (Benzeno), que é a unidade básica dos PAHs. Atribui-se a esta família de moléculas orgânicas duas propriedades fundamentais, a resistência para sobreviver ao campo de radiação UV interestelar e a geração das bandas de emissão não identificadas (UIR) observadas no infravermelho. No entanto, alguns autores questionam a resistência dos PAHs ao campo de radiação UV interestelar. Empregando a técnica de Espectrometria de Massas por Tempo de Vôo, no modo de coincidência fotoelétron-fotoíon, estudamos a ionização e fragmentação das seguintes moléculas: Benzeno, Benzeno deuterado, Naftaleno, Antraceno e Fenantreno. Utilizamos uma fonte de Hélio monocromática em 21,21 eV (584,5 Å) e a radiação Síncroton do Laboratório Nacional de Luz Síncroton (LNLS) em diferentes energias nas proximidades da borda do C 1s ( 290 eV). Comprovamos a estabilidade dos PAHs sob ação de UV (21,21 eV), onde eles apresentam um baixo nível de fotodissociação, produzindo fragmentos ionizados com rendimento total na ordem de 5 por cento em relação ao íon molecular pai. Entretanto, em altas energias, na faixa de Raios-X, a quebra destas moléculas torna-se mais intensa, com a produção de muitos fragmentos. Como uma das rotas de fragmentação do Naftaleno é [(C10H8) = > (C6H6+) + (C4H2) + (e-)], e como temos as evidências observacionais da existência do C4H2 e C6H6 na nebulosa CRL 618, sugerimos que este ambiente também possui o Naftaleno.

  7. ANÁLISE QUANTITATIVA DE AMOSTRAS GEOLÓGICAS UTILIZANDO A TÉCNICA DE FLUORESCÊNCIA DE RAIOS X POR DISPERSÃO DE ENERGIA

    Directory of Open Access Journals (Sweden)

    CARNEIRO A. E. V

    1996-01-01

    Full Text Available Este trabalho propõe uma metodologia para análise quantitativa de amostras geológicas, que apresentam uma considerável fração de elementos leves (número atômico Z < 13, utilizando a técnica de fluorescência de raios X por dispersão de energia, com excitação radioisotópica. O procedimento proposto baseia-se no método dos Parâmetros Fundamentais para a quantificação dos elementos analíticos (Z ³ 13 e na radiação de excitação espalhada coerente e incoerentemente para a quantificação da fração leve da matriz (Z < 13. Neste método, a relação entre a intensidade fluorescente e a concentração elementar foi estimada através da sensibilidade elementar e fator de geometria para a fluorescência, determinados com auxílio de amostras padrão confeccionadas com elementos puros e compostos simples, de densidade superficial e composição conhecidas. A relação entre as intensidades espalhadas e a fração leve da matriz foi estabelecida com base nos fatores de geometria, nos fatores de espalhamento e nas seções de choque diferenciais. Para a produção dos raios X característicos dos elementos Mn ao Zr foi utilizada uma fonte radioativa anelar de Cd-109 (1,70 GBq e para os elementos Al ao Cr, uma de Fe-55 (0,74 GBq. Para a detecção dos raios X foi utilizado um detector de Si(Li acoplado a um analisador multicanal. As intensidades líquidas dos raios X característicos, e as intensidades espalhadas de modo coerente e incoerente foram obtidas utilizando um programa aplicativo de ajuste de espectro, denominado AXIL (Espen et al., 1977 e 1979. A metodologia foi testada analisando-se os padrões certificados, Soil-5/AIEA, SL-2/AIEA, SARM-2/SABS, SARM-3/SABS, SARM-4/SABS e SARM-6/SABS, diluídos com ácido bórico na proporção 1:4, obtendose pastilhas com densidade superficial de aproximadamente 100 mg.cm - 2. O método proposto mostrou boa reprodutibilidade, com coeficiente de variação em geral inferiores a 10%. Quanto

  8. Estudos conformocionais de diversas proteínas em solução utilizando a técnica de espalhamento de raios-X à baixo ângulo-saxs

    OpenAIRE

    Viçoti, Magno Massolino [UNESP

    2011-01-01

    A técnica de espalhamento de raios-X a baixo ângulo – SAXS é uma poderosa ferramenta para a caracterização de macromoléculas biológicas em solução. Aplicando-a de forma correta podemos obter parâmetros físicos à respeito do material de estudo, como raio de giração, máxima dimensão, volume e superfície. Neste trabalho caracterizou-se em solução aquosa a macromolécula heterodimérica crotoxina com a variação do pH em ácido, básico e neutro. Esta proteína foi isolada da serpente sul-americana Cro...

  9. Análise da medição do raio solar em ultravioleta

    Science.gov (United States)

    Saraiva, A. C. V.; Giménez de Castro, C. G.; Costa, J. E. R.; Selhorst, C. L.; Simões, P. J. A.

    2003-08-01

    A medição acurada do raio solar em qualquer banda do espectro eletromagnético é de relevância na formulação e calibração de modelos da estrutura e atmosfera solar. Esses modelos atribuem emissão do contínuo do Sol calmo em microondas à mesma região da linha Ha do Hell. Apresentamos a medição do raio solar em UV com imagens do EIT (Extreme Ultraviolet Image Telescope) entre 1996 e 2002, no comprimento de onda 30,9 nm (Ha do Hell), que se forma na região de transição/cromosfera solar. A técnica utilizada para o cálculo do raio UV foi baseada na transformada Wavelet B3spline. Fizemos um banco de dados com 1 imagem por dia durante o período citado. Obtivemos como resultado o raio médio da ordem de 975.61" e uma diminuição do mesmo para o período citado variando em média -0,45" /ano. Comparamos estes dados com os valores obtidos pelo ROI (Radio Observatório de Itapetinga) em 22/48 GHz e Nobeyama Radio Heliograph em 17 GHz mostrando que os raios médios são muito próximos o que indica que a região de formação nessas freqüências é a mesma conforme os modelos. Comparamos os resultados também com outros índices de atividade solar.

  10. Quantitative analysis by energy dispersive X-ray fluorescence by the transmission method applied to geological samples Análise quantitativa por fluorescência de raios X com dispersão por energia pelo método da transmissão aplicada à amostras geológicas

    Directory of Open Access Journals (Sweden)

    S.M. Simabuco

    1994-08-01

    Full Text Available Three certified samples of different matrices (Soil-5, SL-1/IAEA and SARM-4/SABS were quantitatively analysed by energy dispersive X-ray fluorescence with radioisotopic excitation. The observed errors were about 10-20% for the majority of the elements and less than 10% for Fe and Zn in the Soil-5, Mn in SL-1, and Ti, Fe and Zn in SARM-4 samples. Annular radioactive sources of Fe-55 and Cd-109 were utilized for the excitation of elements while a Si(Li semiconductor detector coupled to a multichannel emulation card inserted in a microcomputer was used for the detection of the characteristic X-rays. The fundamental parameters method was used for the determination of elemental sensitivities and the irradiator or transmission method for the correction of the absorption effect of characteristic X-rays of elements on the range of atomic number 22 to 42 (Ti to Mo and excitation with Cd-109. For elements in the range of atomic number 13 to 23 (Al to V the irradiator method cannot be applied since samples are not transparent for the incident and emergent X-rays. In order to perform the absorption correction for this range of atomic number excited with Fe-55 source, another method was developed based on the experimental value of the absorption coefficients, associated with absorption edges of the elements.Foi realizada a análise quantitativa de três amostras certificadas de diferentes matrizes (Soil-5/IAEA, SL-1/IAEA e SARM-4/SABS através da fluorescência de raios X por dispersão de energia e excitação radioisotópica. Os erros observados foram em torno de 10 a 20% para a maioria dos elementos e inferiores a 10% para Fe e Zn na amostra Soil-5, Mn na amostra SL-1 e Ti, Fe e Zn na amostra SARM-4. Para a excitação dos elementos presentes foram empregadas as fontes radioativas anelares de Fe-55 e Cd-109, enquanto que na detecção dos raios X característicos utilizou-se um detector de Si(Li, acoplado a uma placa analisadora de pulsos multicanal

  11. Identificação de fissuras em sementes de arroz após a secagem artificial, por meio de raios-X

    Directory of Open Access Journals (Sweden)

    Menezes Nilson Lemos de

    2005-01-01

    Full Text Available A unidade vegetal usada como semente de arroz é uma cariópse protegida por glumelas, as quais impedem a visualização de danos internos. As radiografias de raios-X em sementes de arroz possibilitam a visualização interna e a identificação de fissuras, sem preparo prévio. O objetivo deste trabalho foi determinar parâmetros para obtenção de radiografias de raios-X em sementes de arroz, capazes de avaliar fissuras após o processo de secagem. O experimento foi conduzido no Laboratório de Análise de Imagens da Escola Superior de Agricultura Luiz de Queiroz (ESALQ/USP, em Piracicaba - SP. Utilizaram-se sementes de arroz das cultivares IRGA 417 e IRGA 420, submetidas às combinações das intensidades de radiação obtidas com voltagens de 11, 13, 14, 15 e 17 kv e tempos de exposição de 120, 180, 300 e 360 segundos. As radiografias foram obtidas em aparelho de raios-X (Faxitron X-ray, com filme radiográfico Kodak (18x24cm, a uma distância de 35 cm da fonte de raios-X. Os filmes foram revelados em processadora automática (Hope X-ray e as imagens digitalizadas em "scanner" (Umax, PowerLook, 1100, para posterior avaliação em computador. A interpretação das imagens não foi influenciada pelas cultivares, mas sim pela posição das sementes. A posição lateral, com o embrião posicionado para o lado esquerdo facilitou a visualização das fissuras. A combinação 14kv e 360s foi a mais adequada, uma vez que identificou perfeitamente as partes da semente, apresentando claramente as fissuras, sem distorções.

  12. Dosimetria e monitoração de feixes estreitos de raios-X, produzidos por acelerador linear de particulas, para aplicação em radiocirurgia

    OpenAIRE

    Jose Carlos Ferraz de Campos

    1986-01-01

    Resumo: O presente trabalho teve como objetivo principal investigar as características principais de dosimetria e monitoração de feixes finos de raios-x, e sua aplicação a um Acelerador Linear de Partículas de 4 MV, para seu emprego na Radiocirurgia. Com esta finalidade, construiu-se um sistema de colimação adicional, composto de 3 colimadores de Chumbo, que permite, a partir do campo mínimo protocolar produzido pelo acelerador, obter os feixes finos de 6, 10 e 15 mm de diâmetros. Um siste...

  13. O PAPEL DAS CAPTURAS FLUVIAIS NA MORFODINÂMICA DAS BORDAS INTERPLANÁLTICAS DO SUDESTE DO BRASIL

    Directory of Open Access Journals (Sweden)

    Luis Felipe Soares Cherem

    2014-04-01

    Full Text Available No sudeste do Brasil, principalmente no Estado de Minas Gerais, são observados planaltos escalonados drenados por diferentes bacias hidrográficas, muitas vezes separadas entre si por nítidos degraus morfológicos resultantes da diferença no potencial erosivo de suas cabeceiras de drenagem, como resposta à tectônica distensiva cenozoica. Adicionalmente, capturas fluviais que condicionam a rede de drenagem a buscar um novo perfil de equilíbrio e alteram a morfologia dos canais envolvidos (captor, capturado, decaptado e afluentes diretos são frequentes. Esse artigo apresenta o papel de três grandes capturas fluviais (Capturas de São Vicente de Paula, de Carandaí e de Vilas-Boas na morfodinâmica de três bordas interplanálticas entre as quatro mais importantes bacias hidrográficas do sudeste do Brasil: são Francisco, Doce, Paraná e Paraíba do Sul.  A análise inicial com base em material cartográfico (cartas topográficas, geológicas e geomorfológicas e os trabalhos de campo, com descrição dos canais envolvidos mostraram que as três capturas analisadas apresentam características diferentes: 1 em Vilas-Boas a crista da escarpa se encontra na posição original e as alterações na paisagem se limitam aos vales, com incisão de 2,5m, até 1 km à montante do ponto de captura; 2 em Carandaí a crista da escarpa já se encontra recuada a cerca de 1,5 km do ponto de captura, que foi rebaixado em100 m, e as alterações atingem os 3 km de distância desse ponto; e 3 em São Vicente a crista da escarpa já se encontra recuada a cerca de 3,5 km do ponto de captura, que foi rebaixado em 250m (atingindo o planalto inferior e as alterações atingem 8km de distância desse ponto.   Estes resultados demonstram a influência das capturas fluviais na morfodinâmica das bordas interplanálticas do sudeste do Brasil. As capturas aceleram a morfodinâmica do processo de recuo das escarpas, onde as áreas capturadas são dissecadas e

  14. Does the edge effect influence plant community structure in a tropical dry forest? O efeito de borda influencia a estrutura da comunidade vegetal em uma floresta tropical seca?

    Directory of Open Access Journals (Sweden)

    Diogo Gallo Oliveira

    2013-04-01

    Full Text Available Edge effects are considered a key factor in regulating the structure of plant communities in different ecosystems. However, regardless to few studies, edge influence does not seem to be decisive in semiarid regions such as the Brazilian tropical dry forest known as Caatinga but this issue remains inconclusive. The present study tests the null hypothesis that the plant community of shrubs and trees does not change in its structure due to edge effects. Twenty-four plots (20 x 20 m were set up in a fragment of Caatinga, in which 12 plots were in the forest edges and 12 plots were inside the fragment. Tree richness, abundance and species composition did not differ between edge and interior plots. The results of this study are in agreement with the pattern previously found for semiarid environments and contrasts with previous results obtained in different environments such as Rainforests, Savanna and Forest of Araucaria, which indicate abrupt differences between the border and interior of the plant communities in these ecosystems, and suggest that the community of woody plants of the Caatinga is not ecologically affected by the presence of edges.Efeitos de borda são considerados fator-chave na regulação da estrutura de comunidades vegetais em diferentes ecossistemas. Entretanto, apesar dos poucos estudos relacionados, o efeito de borda parece não ser determinante em regiões semiáridas, como a floresta tropical seca brasileira, conhecida como Caatinga. Este estudo testou a hipótese nula de que a comunidade vegetal arbustivo-arbórea não sofre alterações em sua estrutura, riqueza e composição devido ao efeito de borda. Foram instaladas 24 parcelas (20 x 20 m em um fragmento de Caatinga arbórea, sendo 12 parcelas na borda do fragmento e 12 parcelas no seu interior. A riqueza, abundância e composição das espécies não diferiram estatisticamente entre as parcelas de borda e interior. Os resultados deste estudo corroboram um possível padr

  15. O ensino de física das radiações na formação de auxiliares de enfermagem e atendentes de consultórios odontológicos: sondagem de concepções sobre os raios-x com enfoque na prevenção e tecnologia

    Directory of Open Access Journals (Sweden)

    Luciano Gonsalves Costa

    2002-01-01

    Full Text Available Neste trabalho é feita uma reflexão sobre algumas questões que envolvem a formação e a atuação do auxiliar de enfermagem e do atendente de consultório odontológico num contexto marcado pela tecnologia. A educação científica e a alfabetização científica são apontadas como caminhos para a transformação do cenário existente. Também, são apresentados os resultados de uma investigação conceitual sobre os raios-x com enfoque na prevenção e tecnologia.This paper presents some considerations about the technology and the formation of nursing and dentist staff. The scientific education and the scientific literacy are pointed out as alternatives for the transformation of the scenery. Finally, the results of a conceptual research about x-rays are presented.

  16. Modificação da virulência do virus do mixoma provocada pelos raios X Changes in virulence of the mixoma virus produced by X-Rays

    Directory of Open Access Journals (Sweden)

    F. Rocha Lagôa

    1952-03-01

    Full Text Available Foi estudada a ação dos raios X sôbre a vírus sêco do mixoma dos coelhos. Ao atingir a incidência dos raios X a concentração de 294.000 r até 378.000, quando desapareceu tôda a atividade patogênica do vírus, nem todos os animais inoculados adquiriam a moléstia, passando a evoluir a mesma em alguns dêsses animais de forma muito mais lenta que a presente nas testemunhas. concordando com esta sintomatologia, o exame histopatológico do material colhido no ponto de lesão mais intensa de animais atacados com mixoma de evolução lenta, revelou a existência de lesões menos extensas e intesas que aquelas presentes nos animais inoculados com o vírus normal, o que mostra terem os raios X determinado uma diminuição da virulência do vírus do mixoma, mas não uma mutação. Os animais inoculados sucessivamente com vírus irradiado acima de 378.000 r, portanto inativados, foram, após 30 dias, inoculados com vírus de virulência íntegra, adquirindo, no entanto, a infecção mixomatosa com todos os caracteres típicos, o que revelou não conservar o vírus do mixoma inativado pelos raios X as suas propriedades antigênicas, não conferindo, portanto, proteção contra inoculações ulteriores de vírus mixomatoso virulento.The action of X Rays on the dried virus of myxoma of the rabbits has been studied. When the incidence of X-Rays reaches the concentration of 294.000 r to 378.000, a dosage which results in the destruction of all the pathogenic activity of the virus, not all the inoculated animals acquired the disease, which, when developing; has in several of these animals, a much slower than in the control animals. In accordance, with this symptomatology, the histopathological study of the material collected on the point of where the lesions are more marked in the animals suffering from a myxomatous infection of slow evolution, shows that the lesions are less extensive and less severe that the ones produced in the animals inoculated

  17. Horror, humor e sexo no cinema de bordas

    Directory of Open Access Journals (Sweden)

    Bernardette Lyra

    2008-04-01

    Full Text Available Por suas características, modos, técnicas e procedimentos, certos filmes de ficção se enquadram naquilo que chamo de cinema de bordas. O cinema de bordas se faz sobre fragmentos reciclados de gêneros, subgêneros e espécies, sem que, no entanto, nenhum dentre os modelos usados se apresente determinante. Tal reciclagem genérica tem por conseqüência a ausência da novidade e da originalidade, em favor da continuidade e da repetição daquilo já anteriormente conhecido. Nesse sentido, o cinema de bordas comumente recorre a formas que materializam a ação e o sentimento, utilizados tanto por alguns gêneros cinematográficos como pela literatura popular ou literatura de massa. Este trabalho enfoca, em especial, a produção com as formas do horror, do humor e do sexo, quase sempre excluídas do discurso das instituições que consagram uma centralidade canônica. O resultado específico é uma mistura que se alimenta das bordas compostas por diferentes instâncias culturais que vai do estrato mais erudito ao mais popular e vice-versa.

  18. Trump, Condorcet and Borda

    DEFF Research Database (Denmark)

    Kurrild-Klitgaard, Peter

    . Furthermore, later polling data (March 2016) suggests that while Trump (who achieved less than 50% of the total Republican primary vote) was the Plurality Winner, he could have been beaten in pairwise contests by at least one other candidate—thereby exhibiting a case of the Borda Paradox. The cases confirm...

  19. A INFLUÊNCIA DE UMA ESTRUTURA DE IMPACTO NA MORFODINÂMICA DA BORDA MERIDIONAL DO PLANALTO PAULISTANO: O CASO DA CRATERA DE COLÔNIA, EM SÃO PAULO-SP

    Directory of Open Access Journals (Sweden)

    Andre Henrique Bezerra dos Santos

    2015-10-01

    Full Text Available O trabalho tem como objetivo compreender a influência de uma estrutura de impacto pliocênica a oligocênica na morfodinâmica da borda meridional do Planalto Paulistano, em São Paulo (SP, onde se localiza a cratera de Colônia. Com 3,6 km de diâmetro e forte circularidade, a morfologia da cratera é singular na região, na qual predominam morros de topos convexos, esculpidos sobre o embasamento cristalino e sob climas predominantemente úmidos no Quaternário. Elabora-se uma caracterização de elementos sugestivos de condicionamento geológico do relevo e da drenagem, por meio de fotointerpretação, trabalhos de campo e análises morfométricas de Modelos Digitais de Elevação (MDEs. Conclui-se que as deformações produzidas pelo impacto às rochas da região se estendem para além das bordas da cratera, refletindo no estabelecimento de uma rede de drenagem de padrão anelar em seu entorno, sobre as estruturas derivadas do impacto superpostas às estruturas regionais de direção predominante ENE. Além disso, a proeminente assimetria altimétrica de sua crista, mais elevada a SW que a NE, é interpretada como resultado da maior degradação do relevo a NE, conforme apontado a partir de dados geofísicos de seu embasamento.

  20. X-ray test for the evaluation of the internal morphology of the seeds of seafortia palm treesTeste de raios X para avaliação da morfologia interna de sementes da palmeira seafórtia

    Directory of Open Access Journals (Sweden)

    Walas Permanhane Sturião

    2012-12-01

    Full Text Available The seafortia palm tree (Archontophoenix cunninghamii is originally from Australia and is widely used in ornamental gardens in Brazil. Due to the lack of information on the process of obtaining quality seedlings and the market demand for ornamental palms, the objective of this study was to use an x-ray test to evaluate the internal morphology of the seeds of A. cunninghamii. A total of 8 replicates of 25 seeds were submitted to x-ray analysis using the Raicenter RC 300 Plus T equipment; several radiation intensities and times were used. According to the internal morphology observed on the radiographs, the seeds were classified into 4 categories: perfect seeds, seeds with little damage (less than 50% of tissues damaged, seeds with substantial damage (more than 50% of tissues damaged, and embryos not visualized. After the radiography analysis, the seeds were submitted to a germination test for 160 days at a temperature of 30ºC using sphagnum as the substrate. Radiographic analysis at an intensity of 37 kVp and x-ray exposure for 0.25 s was sufficient to evaluate to the internal morphology of the seafortia seeds. The results obtained were as follows: 78% perfect seeds, 15% seeds with little damage, 4% seeds with substantial damage, and 3% seeds in which embryos were not observed. Seafortia palm seeds classified as perfect showed a higher percentage of germination, whereas those that had some level of damage tended to show a low physiological quality that was inimical to germination. A palmeira seafórtia (Archontophoenix cunninghamii é originária da Austrália e é muito utilizada na ornamentação nos jardins brasileiros. Devido à carência de informações para o processo de produção de mudas de qualidade e que atendam às demandas do mercado de palmeiras ornamentais, objetivou-se com esta pesquisa utilizar o teste de raios X na avaliação da morfologia interna de sementes da palmeira A. cunninghamii. Foram utilizadas 08 repetições de 25

  1. Variants of the Borda count method for combining ranked classifier hypotheses

    NARCIS (Netherlands)

    van Erp, Merijn; Schomaker, Lambert; Schomaker, Lambert; Vuurpijl, Louis

    2000-01-01

    The Borda count is a simple yet effective method of combining rankings. In pattern recognition, classifiers are often able to return a ranked set of results. Several experiments have been conducted to test the ability of the Borda count and two variant methods to combine these ranked classifier

  2. Study on vinasse dynamics in soil usin energy dispersive X-ray fluorescence with radioisotopic excitation Estudo da dinâmica da vinhaça em solo utilizando a fluorescência de raios x por dispersão de energia com excitação radioisotópica

    Directory of Open Access Journals (Sweden)

    S.M. Simabuco

    1994-08-01

    Full Text Available The distribution of S, Cl, K and Ca along the profiles of two soils of different texture (Red Yellow Podzolic and Dark Red Latosol treated with amounts of vinasse equivalent to 4000 m³/ha were studied using energy dispersive X-ray fluorescence, observing a significant increase in the contents of these elements. The same effect was observed for Cu, Zn, Rb and Sr contents in soils treated with vinasse as compared to the control. The concentrations of Al, Si, Ti, Mn, Fe and Zr could also be evaluated but no significant variation was observed due to the high soil initial concentrations of these elements as compared to the low concentrations in the vinasse. Annular radioactive sources of Fe-55 and Cd-109 were employed for the excitation of these elements in the soil samples, treated or not with vinassse. For the detection of the characteristic X-rays, a Si (Li semiconductor detector was used, coupled to a multichannel emulation card inserted in a microcomputer.A distribuição de S, Cl, K e Ca ao longo de perfis de dois solos de diferentes texturas (Podzólico Vermelho Amarelo e Latossolo Vermelho Escuro, tratados com uma dose de vinhaça equivalente a 4000 m³/ha, foi estudada utilizando a fluorescência de raios X por dispersão de energia, observando-se um acréscimo significativo dos teores destes elementos. O mesmo efeito foi observado nos teores de Cu, Zn, Rb e Sr nos solos tratados com vinhaça em relação às testemunhas. As concentrações de Al, Si, Ti, Mn, Fe e Zr também puderam ser avaliadas, mas não houve variação nos perfis, devido à alta concentração inicial nos solos acompanhada de baixa concentração na vinhaça. Na excitação dos elementos presentes nas amostras de solo tratados ou não com vinhaça foram empregadas fontes radioativas anelares de Fe-55 e Cd-109, e na detecção dos raios X característicos um detector semicondutor de Si (Li, acoplado a uma placa analisadora de pulsos multicanal, inserida em um

  3. MUDANÇAS AMBIENTAIS QUATERNÁRIAS NO MEGALEQUE FLUVIAL DO AQUIDAUANA, BORDA SUDESTE DO PANTANAL MATOGROSSENSE

    OpenAIRE

    Gregório, Eliézer Cece; Facincani, Edna Maria; Professora Dra. da FAENG/UFMS (Faculdade das Engenharias, Arquitetura e Urbanismo e Geografia da Universidade Federal de Mato Grosso do Sul), Campus de Campo Grande/MS – Brasil – bloco 7A. Telefone: (67) 3345-7384. E-mail:; Amorim, Gustavo Marques e; Turismólogo - UFMS / Mestre e Doutor em Geociências - Geologia Regional - UNESP FUNDECT - Fundação de Apoio ao Desenvolvimento do Ensino, Ciência e Tecnologia do Estado de Mato Grosso do Sul UFMS -Fundação Universidade Federal de Mato Grosso do Sul INFI - Instituto de Física - Laboratório de Modelagem Computacional Telefone: (67) 9126-7405 (67) 3345-7384

    2016-01-01

    O Megaleque do Aquidauana é um trato de sistemas deposicionais, em que o rio Paraguai é a drenagem principal, coletora das águas de diversos leques fluviais, constituindo de uma importante feição geomorfológica instalada na Borda Sudeste do Pantanal Mato-Grossense, com área de aproximadamente 3.783.48 km². No presente trabalho, utilizando dados orbitais e técnicas de interpretação visual de imagens a área foi compartimentada em três lobos deposicionais distintos denominados de antigo, pré-atu...

  4. Avaliação da qualidade de sementes de cedro (Cedrela fissilis - meliaceae pelo teste de raios X Evaluation of the seed quality in Cedrela fissilis - (meliaceae by X-ray test

    Directory of Open Access Journals (Sweden)

    Tathiana Elisa Masetto

    2008-12-01

    Full Text Available O teste de raios X tem se demonstrado uma técnica muito eficiente no controle de qualidade de sementes de espécies florestais, caracterizando fases do desenvolvimento, danos causados por secagem, beneficiamento e predação, entre outros. Objetivouse com este trabalho avaliar a qualidade física de sementes de cedro (Cedrela fissilis pelo teste de raios X. Para isso, após o beneficiamento, as sementes de cedro foram expostas às seguintes condições de intensidade de radiação e tempos (25 Kv durante 60/30 segundos e 30 Kv durante 40 segundos para determinar o padrão de raios X. De acordo com a anatomia visualizada pela imagem radiográfica, as sementes foram classificadas em Sementes Cheias, Sementes Com Danos, Sementes Mal Formadas e Sementes Vazias. Em seguida, foi realizado o teste de germinação em BOD, utilizando-se substrato de papel umedecido dentro de caixas para germinação, sob 25ºC e luz branca constante. Ao final de 20 dias, foram registrados os números de plântulas normais, anormais e sementes mortas. Pelos resultados obtidos, a intensidade de radiação de 25 Kv durante 60 segundos permitiu melhor visualização das características internas e os danos observados pela imagem radiográfica afetaram a germinação das sementes, reduzindo a qualidade do lote.The X-ray has showed to be a very efficient technique in the quality control of forest tree seeds, characterizing development phases, damages caused by dehydration, improvement and infestation, among others. The aim of this work was to evaluate the physical quality of cedar seeds (Cedrela fissilis by X-ray test. For this, the cedar seeds were exposed at the following conditions of radiation intensity and times (25 Kv during 60/30 seconds and 30 Kv during 40 seconds to determine the pattern of X-rays. According to the anatomy visualized by the radiographic image, seeds were classified in Full Seeds; Seeds With Damages, Deformed Seeds and Empty Seeds. Soon after, the

  5. Habitar as bordas e pensar o presente

    Directory of Open Access Journals (Sweden)

    Katia Aguiar

    2014-09-01

    Full Text Available Em meio à multiplicação das manifestações de rua emergentes no cenário brasileiro, a problematização do presente ganha outros contornos, em que a inauguração de um novo momento da história recente abre o horizonte de possíveis. é nesse atual que as resistências se inscrevem e é nele que as lutas sociais diante dos processos de exploração, opressão e dominação do capitalismo possuem novos territórios de combate. Esse atual reiteradamente adjetivado como novo não surge do vazio, mas dos agenciamentos feitos com as diferentes linhas que compõem a trama dos estratos de poder sedimentados na história da humanidade, de suas cidades e de seus dispositivos ordenadores. O presente artigo busca problematizar esse presente imediato por meio da remontagem na história de algumas linhas-duras que dão contornos às instituições vigentes, expondo o funcionamento e as estratégias dos variados exercícios de poder disciplinar e de controle contemporâneos. Por meio de pistas abertas por Foucault sobre novos dispositivos do ordenamento mundial e da releitura com contornos institucionalistas do conceito de borda desenvolvidos por Mezzadra e Neilson, procuramos por analisadores históricos e quentes para pintar essa cartografia.

  6. Estudo da liga alumínio-zinco como filtração alternativa em aparelhos de raios X odontológicos Study of the aluminum-zinc alloy as an alternative means of filtration in dental X-ray devices

    Directory of Open Access Journals (Sweden)

    Claudia Fátima Silva HAITER

    2002-03-01

    Full Text Available O objetivo neste trabalho foi avaliar os efeitos da filtração alternativa da liga alumínio-zinco em aparelhos de raios X odontológicos, em relação ao espectro de energia dos feixes de raios X, a taxa de kerma no ar, o índice de contraste nas radiografias obtidas e a qualidade das imagens radiográficas. Este estudo foi realizado comparando-se o filtro convencional de alumínio com várias espessuras do filtro de liga alumínio-zinco, em diferentes porcentagens do elemento zinco na liga (2%, 3%, 4% e 5%. Foi utilizado um aparelho de raios X odontológico convencional, operando com 60 kVp e 70 kVp, e filmes radiográficos dos grupos D e E de sensibilidade. Foram realizadas radiografias de um "phantom" e de uma escala de densidade de alumínio. Os resultados mostraram que o uso dos filtros de liga Al-Zn resultou em um não-endurecimento dos feixes. A taxa de kerma no ar diminuiu em até 18,53%, sem alteração no contraste das radiografias e a qualidade das imagens teve uma boa aceitação pelos examinadores. A análise dos resultados nos levou a concluir que o filtro de liga Al-Zn 2%, com 1,99 mm de espessura, tensão de 60 kVp, quando usado com filme D, foi o que obteve melhor desempenho, reduzindo a taxa de kerma no ar sem variar o índice de contraste das radiografias, mantendo a qualidade da imagem aceitável para diagnóstico, sem contudo aumentar o tempo de exposição.The aim of this study was to evaluate the effects of alternative filtration with the aluminum-zinc alloy in dental X-ray devices, regarding the energy spectrum, dose, contrast and image quality. This study was carried out comparing the conventional aluminum filter with aluminum-zinc alloy filters of various thicknesses and with different percentages of zinc in the alloy (2, 3, 4 and 5%. A conventional X-ray device operating with 60 and 70 kVp as well as D- and E-speed films were utilized in order to obtain images of a phantom and an aluminum step wedge. The utilization

  7. Avaliação da macroporosidade e da densidade de partículas do solo através da microtomografia de raios-x

    Directory of Open Access Journals (Sweden)

    A. Macedo

    1999-12-01

    Full Text Available A Ciência do Solo procura compreender e modelar os fenômenos ocorridos no solo, principalmente na zona não saturada. Como o entendimento de muitos desses fenômenos exige determinações em escalas que permitam incorporar aos modelos a variabilidade de poros e agregados, desenvolveu-se, na Embrapa Instrumentação Agropecuária, um tomógrafo de raios-X, de resolução micrométrica, com o objetivo de se obterem imagens, de forma não-destrutiva, de amostras de solo, com resolução espacial igual ou inferior a 100 μm. Foi possível projetar e construir um equipamento, de alta resolução, com baixo custo, comparativamente aos equipamentos comerciais disponíveis, cujos preços são proibitivos para aplicações em solo. Obtiveram-se imagens de amostras de solos com estrutura deformada, compostos por agregados de 212 a 250 μm, nos quais foram identificados poros medindo 100 μm ou menos. Poros dessas dimensões foram visualizados, também, em tomografias de amostras compostas de grãos de areia de 1 mm e capilares de vidro com diâmetros internos de 100, 200 e 300 μm. Tomografias de amostras não deformadas de solos evidenciaram, além de poros de 200 a 800 μm, partículas de alta densidade não-detectáveis com a tomografia de resolução milimétrica.

  8. A Social Choice Analysis of the Borda Rule in a General Linguistic Framework

    Directory of Open Access Journals (Sweden)

    Garcia-Lapresta

    2010-10-01

    Full Text Available In this paper the Borda rule is extended by allowing the voters to show their preferences among alternatives through linguistic labels. To this aim, we need to add them up for assigning a qualification to each alternative and then to compare such qualifications. Theoretically, all these assessments and comparisons fall into a totally ordered commutative monoid generated by the initial set of linguistic labels. Practically, we show an example which illustrates the suitability of this linguistic approach. Finally, some interesting properties for this Borda rule are proven in the Social Choice context.

  9. Tectônica transcorrente mesozoica-cenozoica na Borda Leste da Bacia do Paraná, Estado de Santa Catarina

    OpenAIRE

    Patricia Duringer Jacques

    2013-01-01

    O presente estudo teve como objetivo principal avaliar as estruturas rúpteis da borda leste da Bacia do Paraná em Santa Catarina, a partir do estudo dos lineamentos estruturais que afetaram as rochas do embasamento, da sucessão ondwânica, das vulcânicas da Formação Serra Geral e das alcalinas associadas ao Domo de Lages e ao Complexo Carbonatítico de Anitápolis. Para atingir estes objetivos, foram efetuados levantamentos de campo de análise estrutural dos lineamentos, integração do arca...

  10. Are the vegetation structure and composition of the shrubby Caatinga free from edge influence? A estrutura e a composição da vegetação da Caatinga arbustiva são livres da influência de borda?

    Directory of Open Access Journals (Sweden)

    André Maurício de Melo Santos

    2008-12-01

    , parcialmente isolado e circundado por Opuntia ficus-indica. Altura das plantas, diâmetro ao nível solo, densidade de indivíduos e riqueza e diversidade de espécies foram estatisticamente iguais entre os habitats de borda e interior. A magnitude da influência de borda variou de -0,027 a 0,027, indicando baixa importância ecológica da criação de bordas para as variáveis analisadas. Adicionalmente, a similaridade florística entre os habitats alcançou 90% e uma análise de componentes principais mostrou que a composição de espécies varia de forma similar na borda e no interior. O conjunto dos resultados indica que a vegetação do fragmento estudado não é ecologicamente afetada pela criação de bordas e sugere que alterações nas condições físicas e na disponibilidade de recursos após a criação das bordas são insuficientes para eliminar plantas já estabelecidas ou alterar o recrutamento e a sobrevivência de novos indivíduos.

  11. GDSS Penentuan Lokasi Shelter Baru Transjogja Menggunakan Metode Brown-Gibson dan Borda

    Directory of Open Access Journals (Sweden)

    Bhakti Susilo

    2013-07-01

    Abstract The purpose of establishment of the Transjogja bus fleet is to solve the problems of congestion, pollution and adequate public transport. To provide the best service, one thing is to place the shelter afforded in the right position. Department of Communication, cooperate with other agencies in the collection of executive aspirations, for the determination of the location of the new shelter. The combinations of  Brown-Gibson and Borda methods, possible used for site selection as a group. This method is used to select an alternative location based on the size of a particular preference (preference measurement taking into account the objective factors and subjective factors. Objective factor in the form of cost effectiveness is the total amount of expenses incurred for an alternative location. Subjective weighting factor of the decision makers of the criteria required in determining the location of the new shelter. These criteria include land, position, and access to space, competition, transportation and security. In the assessment of subjective factors is using the AHP model. The result of this study is to GDSS using the Brown-Gibson method and Borda shown to accommodate the preferences of many decision makers. With the output of the value location preference and rankings, it facilitated DM to determine new location. Location that has the highest ranking is more potent as a location for a new shelter. Keywords— Location, Brown-Gibson, Borda

  12. Importância do raio X e exame físico no diagnóstico da artrite psoriática e sua prevalência no Hospital Universitário Evangélico de Curitiba (HUEC The importance of radiologic evaluation and physical examination in diagnosis of psoriatic arthritis and its prevalance in the Hospital Universitário Evangélico de Curitiba

    Directory of Open Access Journals (Sweden)

    Ana Paula Bächtold Machado

    2005-12-01

    Full Text Available FUNDAMENTOS: A artrite psoriática (AP é doença inflamatória associada com a psoríase da pele ou das unhas, com fator reumatóide (FR negativo e ausência de nódulos reumatóides. Pode ser extremamente agressiva, deixando o paciente incapacitado para realizar funções do dia-a-dia. A prevalência populacional é muito variável; historicamente oscila entre 2,6% e 7%, mas estudos recentes demonstram porcentagem variável de 23 a 69% na população com psoríase. O diagnóstico é de exclusão e, se realizado na fase inicial, oferece possibilidade de tratamento mais adequado, evitando complicações. O que define a presença da artrite é o exame físico adequado das articulações, já que o raio X pode estar normal. OBJETIVO: Este estudo tem a finalidade de avaliar a importância do raio X e do exame físico no diagnóstico da AP e sua prevalência nos pacientes com psoríase cutânea e ungueal do Hospital Universitário Evangélico de Curitiba. MATERIAL E MÉTODOS: Trinta pacientes com psoríase em acompanhamento nesse serviço foram submetidos a anamnese e exame físico minuciosos. Eles foram questionados quanto a alterações articulares, tempo e severidade de doença e comprometimento ungueal. Os que apresentavam queixas articulares foram encaminhados para investigação por exames complementares: hemograma, FR, VHS, e raio X da articulação comprometida. RESULTADOS: A maioria dos pacientes (56,5% referiu atralgia; contudo apenas três apresentavam artrite. Dos indivíduos com AP, um mostrou raio X normal, mas o exame físico estava alterado. CONCLUSÃO: O exame físico é fundamental para diagnóstico da AP; o raio X não. A prevalência de AP foi de 10%.BACKGROUND: Psoriatic arthritis (PA is an inflammatory disorder associated with skin and nail disease, negative rheumatoid factor (RF and absence of rheumatoid nodules. It can be a devastating and incapacitating condition. Its prevalence is highly variable, ranging from 2,6 to 7

  13. A PAISAGEM DAS BORDAS RODOVIÁRIAS: FORMAS CONFIGURADAS ENTRE A PREVISIBILIDADE E IMPREVISIBILIDADE DO PLANEJAMENTO URBANO

    Directory of Open Access Journals (Sweden)

    Gustavo Izabel

    2017-03-01

    Full Text Available Objetivando analisar a paisagem urbana das bordas rodoviárias, modelada entre a previsibilidade e imprevisibilidade do planejamento urbano. Tomamos como caso exemplar, o entroncamento da Rodovia Washington Luiz com o Arco Metropolitano, no bairro Figueira, em Duque de Caxias, RJ. O impacto causado na paisagem natural e urbana sem o planejamento da paisagem, tende a impactar áreas no processo de ocupação descontrolada. A consequência na paisagem é a modelagem de formas e usos para os espaços que não dialogam com as demais infraestruturas e nem com a tipo-morfologia urbana que caracteriza o lugar. O tema debatido pretende dar visibilidade a importância da pesquisa sobre as dinâmicas locais que tendem a ser impactadas por grandes intervenções de mobilidade urbana, como forma de antever e pensar o projeto urbano que media espaços públicos e privados num desenho urbano comprometido com a qualidade do lugar.

  14. Lattice dynamics of cubic Cs2NaLnX6 and CsNaLn1-xLn'xX6 elpasolites

    International Nuclear Information System (INIS)

    Acevedo, R.; Poblete, V.; Alzamora, R.; Venegas, R.; Navarro, G.; Henriquez, C.

    1999-01-01

    Crystal lattice dynamics of stoichiometric Cs 2 NaLnX 6 and nonstoichiometric CsNaLn 1-x Ln' x X 6 , 0.01 ≤ x ≤ 0.10, Ln and Ln' are trivalent positive lanthanide ions and X is chlorine or bromine, were studied.. Phonon dispersion relations were computed for similar compound, Cs 2 UBr 6 , and vibronic absorption spectra with reduced number of required input parameters are considered on the basis of proposed model. (author)

  15. Correlação de longo alcance em sistemas binários de raios-x usando remoção de flutuações

    Science.gov (United States)

    Pereira, M. G.; Moret, M. A.; Zebende, G. F.; Nogueira, E., Jr.

    2003-08-01

    Neste trabalho é proposta uma metodologia de analise de series temporais de fontes astrofísicas, baseada no método proposto por Peng et al. (1994) e Liu et al. (1999), o qual consiste na idéia de que uma série temporal correlacionada pode ser mapeada por um processo de busca de auto-similaridades em diversas escalas de tempo n. Removendo as eventuais tendências e integrando o sinal observado, é obtida uma medida do desvio médio quadrático das flutuações do sinal integrado F(n)~na, onde a representa o fator de escala associado com a auto-similaridade da correlação de longo alcance do sinal. Baseado nos valores obtidos de a, é possível distinguir entre os casos de sinais não-correlacionados, tipo ruído branco (a = 0,5), sinal anti-persistentes (a 0,5). Usando esta metodologia, foram analisadas 129 curvas de luz de sistemas binários de raios-X, provenientes do banco de dados públicos de observações feitas pelo instrumento All Sky Monitor, a bordo do satélite Rossi X-Ray Timing Explorer (ASM-RXTE). Foram identificadas a presença de a'0,5 em mais de 90% dos sistemas estudados, implicando em dizer que as flutuações de intensidade observadas apresentam correlação de auto-similaridade, sem entretanto, indícios de apresentarem uma escala de tempo característica das flutuações de intensidade. Sistemas onde são observadas erupções (flares), apresentam sistematicamente a > 0,5, característica esta, possivelmente associada com persistência das flutuações de densidade de disco ou taxa de acréscimo de massa. Os sistemas com curvas de luz onde nao são observadas as erupções apresentam uma distribuição normal centrada em a~0,62+/-0,10. Referências ¾ Peng, C.-K., Buldyrev, S.V., Havlin, S., Simons, M., Stanley, H.E., e Goldberg, A.L., Phys. Rev. E, (49), 1685 (1994). ¾ Liu, Y., Gopikrishnan, P., Cizeau, P., Meyer, M., Peng,C.-K., e Stanley, H.E., Phys. Rev. E, (60), 1390 (1999).

  16. Avaliação do efeito de borda da Reserva Biológica de Pindorama, SP

    Directory of Open Access Journals (Sweden)

    M. T. V. N. Abdo

    2015-10-01

    Full Text Available Caracterizou dois fragmentos de floresta estacional semidecidual da Reserva Biológica de Pindorama, SP. Em 65 parcelas de 400 m2 avaliou-se: grau de infestação na parcela, distância da borda, altura, área basal e grau de infestação das quatro maiores árvores e num quadrante sorteado avaliou-se solo, a altitude, o número de espécies, o número, a área basal e a altura de todos indivíduos arbóreos com diâmetro a altura do peito (DAP ≥ a 5 cm e a fitossociologia. O agrupamento hierárquico dividiu as parcelas em dois grupos onde determinou-se valores médios das variáveis, Índices de diversidade de espécies (H’ e Coeficiente de equabilidade (J e a similaridade entre os grupos com o Índice de similaridade de Jaccard (ISJ. O agrupamento hierárquico, k-médias e componentes principais caracterizaram grupos de parcelas semelhantes e as variáveis com maior poder de discriminação foram: altura das quatro maiores árvores, número de indivíduos por parcelas, área basal total, infestação por parcelas, número de espécies. No Grupo 2 houve maior infestação de plantas invasoras e lianas nas quatro maiores árvores e menor distância das parcelas da borda com mais parcelas sob efeito de borda (31,75%. O Grupo 1  teve menor porcentagem  de parcelas sob efeito de borda (22,22%. Edge effect evaluation of Pindorama Biological Reserve-SPAbstract: Edge effect evaluation in two forest remnants in the Biological Reserve Pindorama, SP, in 65 plots of 400 m2, using data of: degree of infestation in the plot, distance from edge, height, basal area and degree of infestation of the four largest trees. In a random quadrant were evaluated soil and altitude, species number, number, basal area and height of trees with diameter at breast height (DBH ≥ 5 cm and phytosociological describers: density absolute and relative, relative dominancy, frequency relative and absolute , importance value, species diversity index (H ', evenness

  17. Música da Borda d'Água: nos textos e imagens de Alves Redol

    Directory of Open Access Journals (Sweden)

    Domingos Morais

    2013-01-01

    Full Text Available António Alves Redol, escritor português natural de Vila Franca de Xira, nasceu a 29 de dezembro de 1911 e faleceu a 29 de novembro de 1969. Figura central do Neorrealismo português, foi autor de uma vasta obra ficcional, que inclui o teatro e o conto. Na noite de 25 de outubro de 1940, no Sport Lisboa e Vila Franca, realizou uma palestra sobre a "Música da Borda d'Água" de que não há registo conhecido. Tentamos refazer essa palestra, ou pelo menos as linhas orientadoras do seu discurso, recorrendo a textos de Redol, alguns inéditos, dos anos de 1938 e 1939, que nos foi possível consultar e digitalizar nos acervos do seu filho, António Mota Redol, em outubro de 2012. Na obra de Redol, as referências à música e dança são estruturantes das situações que descreve. Sem entrar em detalhes técnicos que talvez ignorasse, o que nos diz é revelador de como o movimento neorrealista, que tem em Fernando Lopes-Graça um solitário mentor, não descurou os repertórios e cancioneiros populares, contrapondo-os às práticas e gostos musicais das classes dominantes.

  18. Caracterização da argila bentonítica para utilização na remoção de chumbo de efluentes sintéticos Characterization of smectite clays for application in the removal of lead from synthetic effluents

    Directory of Open Access Journals (Sweden)

    M. G. F. Rodrigues

    2004-09-01

    Full Text Available Este artigo tem como principal objetivo caracterizar argilas esmectíticas chocolate de Boa-Vista, Estado da Paraíba (Brasil na sua forma natural e após tratamento químico, visando a sua utilização na remoção de Pb2+ de efluentes sintéticos. Os métodos de caracterização utilizados foram fluorescência de raios X, difração de raios X, microscopia eletrônica de varredura e espectroscopia de raios X por energia dispersiva. Neste trabalho foi estabelecido o procedimento para remoção de Pb2+ a partir de um efluente inorgânico sintético, utilizando argila natural. Para avaliar a influência dos principais parâmetros, como pH, tratamento e granulometria da argila sobre a remoção do Pb2+, foi utilizado o planejamento fatorial e os melhores resultados obtidos foram: pH 4,5, granulometria entre 35 e 48 mesh, e argila natural.The main objective of this paper is to characterize the Chocolate smectite clays of Boa-Vista, State of Paraíba (Brazil, in their natural form, and after chemical treatment for their application in the removal of Pb2+ from synthetic effluents. The following methods were used: X-ray fluorescence, X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy. In is work the procedures for Pb2+ removal from a synthetic inorganic effluent using a natural clay were established. To evaluate the influence of the main parameters, such as pH, clay treatment and granulometry, on Pb2+ removal, factorial planning was used and the best results obtained were pH 4.5, granulometry in the range of 35 to 48 mesh and natural clay.

  19. Ondas estocásticas de super-horizonte e o raio do universo

    OpenAIRE

    Luis Gustavo Tomaz Silva

    2013-01-01

    O efeito Grishchuk-Zel'dovich (GZ) é um mecanismo através do qual uma onda com comprimento maior que o raio de Hubble produz um quadrupolo nas flutuações de temperatura da Radiação Cósmica de Fundo (RCF). Uma vez que este quadrupolo não é integralmente observado, o quadrupolo efetivo extraído dos mapas de temperatura da RCF é utilizado para colocar um limite inferior no comprimento dessa onda e, consequentemente, no raio da região homogênea que contém o universo observável. Neste trabalho mos...

  20. Criteria for grant with the bonus for working with X-rays or radioactive substances at a federal government university; Criterios para concessao da gratificacao por trabalhos com raios-x ou substancias radioativas em uma Universidade Federal

    Energy Technology Data Exchange (ETDEWEB)

    Moro, J. Tullio; Silva, Maria T.X., E-mail: tullio.moro@ufrgs.b, E-mail: teka@if.ufrgs.b [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Servico de Protecao Radiologica; Tessler, Jacques; Niederauer, Marco A.C., E-mail: jacques.tessler@ufrgs.b, E-mail: marco.niederauer@ufrgs.b [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Div. de Seguranca do Trabalho

    2011-10-26

    Aiming the actualization of the criteria used for grant the 'Gratificacao por trabalhos com Raios X ou substancias radioativas' at a federal government, the administration of personnel constituted a work staff formed by the Work Safety Division and by Radiological Protection Service of the Federal University of Rio Grande do Sul - Brazil. Based on the periodical evaluation of the safety and radiological protection at the work environment and the criteria study of legislation involved in the matter, the work staff established a set of criteria approaching the specificities of the activities developed with ionizing radiation generators at the environment of that University

  1. Generalización del método de votación Borda mediante preferencias difusas

    Directory of Open Access Journals (Sweden)

    García Lapresta, J.L.

    1998-01-01

    Full Text Available En 1770 el ingeniero francés Jean Charles Borda denunció ante la Academia de Ciencias de París que, cuando hay más de dos candidatos, elegir aquél que obtenga un mayor número de votos puede resultar paradójico, ya que la dispersión del voto puede acarrear que el aspirante con mayor número de sufragios puede ser, a su vez, el menos deseado por la mayoría. Por tal motivo, Borda propuso el método que él denominó “elección por orden de mérito” y que hoy lleva su nombre, en el que los electores no sólo tienen en cuenta el candidato más deseado, sino que ordenan la totalidad de los posibles elegibles y les asignan una puntuación tanto mayor cuanto mejor sea la opinión sobre ellos, de tal forma que resulta elegido el aspirante con mayor puntuación total. Este método ha sido utilizado en numerosos tipos de elecciones, tanto por su comodidad como por el hecho de que permite mostrar en cierta forma la intensidad de preferencia entre los candidatos. Adolece, no obstante, de inconvenientes tales como el incumplir el axioma de independencia de alternativas irrelevantes de Arrow (1963, y de tratarse de un método manipulable, si bien este último aspecto ha sido recientemente revisado por Dummet (1998. El hecho de que en el método de Borda los electores asignen un número a cada candidato tiene cierta similitud con la existencia, para cada uno de dichos electores, de una función de utilidad: la puntuación otorgada a cada candidato reflejaría el valor que éste tiene para cada votante. De esta forma el método de Borda podría contemplarse como utilitarista y la utilidad agregada sería la suma de utilidades individuales.

  2. Características petrográficas e químicas das rochas encaixantes das mineralizações auríferas do depósito Lavra Velha (Região de Ibitiara, borda oeste da Chapada Diamantina, Bahia)

    OpenAIRE

    Carlin, Aline de Cassia [UNESP

    2016-01-01

    O depósito de ouro Lavra Velha, que pertence ao Alvo de Prospecção Lavra Velha, da empresa Yamana Gold, localiza-se na cidade de Ibitiara, centro-oeste do Estado da Bahia e borda oeste do domínio fisiográfico da Chapada Diamantina, situado no Aulacógeno do Paramirim, na região norte do Cráton São Francisco. O depósito foi recentemente inserido na classe de modelo IOCG (Iron Oxide Cooper Gold), onde a mineralização de ouro se hospeda em brechas hematíticas sericitizadas. O principal objetivo d...

  3. Influência da temperatura na síntese hidrotérmica da zeólita Y obtida por microondas

    OpenAIRE

    Simões,A. N.; Neiva,L. S.; Simões,V. N.; Rodrigues,M. G.; Gama,L.

    2012-01-01

    Nos últimos anos o aquecimento e a condução de reações químicas por energia de microondas tem sido um tema cada vez mais popular na comunidade científica, e assim nos campos da zeólita. Desta forma, o presente trabalho visa estudar o efeito da temperatura na obtenção da zeólita Y sintetizada por microondas. A temperatura de síntese foi variada de 100 ºC a 90 ºC. As amostras foram caracterizadas por difração de raios X, microscopia eletrônica de varredura e adsorção de nitrogênio. Os resultado...

  4. POÉTICA DE RESISTENCIA EN ITXARO BORDA

    Directory of Open Access Journals (Sweden)

    Tina Escaja

    2014-10-01

    Full Text Available La actitud reivindicativa y visionaria de la pluralidad (del cuerpo, el lenguaje, la sexualidad, la cultura y la geografía en la obra poética de Itxaro Borda es signo de celebración alternativa y de resistencia hacia los valores que impone una nacionalidad vasca unívoca, hipermasculina y fija que con frecuencia la autora vascofrancesa explícitamente denuncia. Su crítica al lenguaje/nación desde el lenguaje/nación que incorpora las diferencias, logra desarticular el discurso unívoco del poder, resistiendo esencialismos y jerarquías desde una «centralidad móvil» o movilidad periférica en la estética de alternancias que plantea su obra poética.

  5. Extracellular Na+ levels regulate formation and activity of the NaX/alpha1-Na+/K+-ATPase complex in neuronal cells.

    Directory of Open Access Journals (Sweden)

    Emmanuelle eBerret

    2014-12-01

    Full Text Available MnPO neurons play a critical role in hydromineral homeostasis regulation by acting as sensors of extracellular sodium concentration ([Na+]out. The mechanism underlying Na+-sensing involves Na+-flow through the NaX channel, directly regulated by the Na+/K+-ATPase α1-isoform which controls Na+-influx by modulating channel permeability. Together, these two partners form a complex involved in the regulation of intracellular sodium ([Na+]in. Here we aim to determine whether environmental changes in Na+ could actively modulate the NaX/Na+/K+-ATPase complex activity.We investigated the complex activity using patch-clamp recordings from rat MnPO neurons and Neuro2a cells. When the rats were fed with a high-salt-diet, or the [Na+] in the culture medium was increased, the activity of the complex was up-regulated. In contrast, drop in environmental [Na+] decreased the activity of the complex. Interestingly under hypernatremic condition, the colocalization rate and protein level of both partners were up-regulated. Under hyponatremic condition, only NaX protein expression was increased and the level of NaX/Na+/K+-ATPase remained unaltered. This unbalance between NaX and Na+/K+-ATPase pump proportion would induce a bigger portion of Na+/K+-ATPase-control-free NaX channel. Thus we suggest that hypernatremic environment increases NaX/Na+/K+-ATPase α1-isoform activity by increasing the number of both partners and their colocalization rate, whereas hyponatremic environment down-regulates complex activity via a decrease in the relative number of NaX channels controlled by the pump.

  6. Uma exposição acidental aos raios X de um difratômetro

    Directory of Open Access Journals (Sweden)

    Valverde N.J. de L.

    2000-01-01

    Full Text Available As mãos de três trabalhadores foram irradiadas acidentalmente numa indústria em Camaçari, Estado da Bahia, Brasil. O diagnóstico clínico de radiodermite aguda foi possível, antes mesmo da confirmação dosimétrica da ocorrência, em virtude das manifestações cutâneas exibidas, precedidas por um eritema, e também pelas histórias ocupacionais. As avaliações das doses recebidas pelos acidentados, usando-se restituições com dosímetros termoluminescentes, tiveram boa correlação com as doses estimadas em função das manifestações clínicas. A causa imediata do acidente foi a má manutenção do equipamento que levou a sua janela posterior a ficar permanentemente aberta, porém foram fatores contributórios importantes a falta de informação dos empregados sobre os possíveis efeitos biológicos das radiações ionizantes e o não seguimento dos procedimentos operacionais corretos. A descrição deste acidente é importante, face ao grande número de difratômetros existentes em laboratórios, universidades, centros de pesquisa e indústrias. Tais aparelhos são considerados "virtualmente isentos de risco ocupacional", o que não é verdadeiro, como comprova a ocorrência que descrevemos. A evolução médica dos pacientes tem sido satisfatória, especialmente em virtude da baixa energia do feixe de raios X do difratômetro e, em conseqüência, da sua pequena penetração tissular.

  7. Estrutura de espécies arbóreas sob efeito de borda em um fragmento de floresta estacional semidecidual em Pernambuco Edge effect on the structure of tree species in a seasonal forest fragment in Pernambuco

    Directory of Open Access Journals (Sweden)

    Alan Caue de Holanda

    2010-02-01

    Full Text Available Os fragmentos florestais são considerados os únicos redutos detentores de biodiversidade do planeta. Conhecer os processos que decorrem após a fragmentação, a exemplo da estrutura arbórea ocorrente na borda, é de fundamental importância para se proporem medidas conservacionistas. Os objetivos deste trabalho, desenvolvido em uma área de 83,8 ha, localizada no Município de Nazaré da Mata, PE, foram efetuar o levantamento fitossociológico de espécies arbóreas adultas sob efeito de borda e verificar a similaridade florística entre as parcelas. A área amostral foi de 10.000 m², equivalentes à implantação de 10 transectos de 10 x 100 m perpendiculares à borda, distribuídos de forma sistemática. Foram amostrados, etiquetados e identificados todos os indivíduos arbóreos com CAP e" 15 cm. Posteriormente, realizaram-se os cálculos dos parâmetros fitossociológicos e da similaridade florística. Neste estudo, amostraram-se 1.238 indivíduos, pertencentes a 72 táxons, distribuídos em 26 famílias botânicas. As espécies Campomanesia xanthocarpa, Zanthoxylum rhoifolium e Anadenanthera colubrina apresentaram o maior valor de importância, pois, teoricamente, conseguiram explorar melhor o recurso proporcionado pelo hábitat.Forest fragments are considered the last refuges for biodiversity in the planet. Knowing the processes that occur after fragmentation, such as the tree structure that occurs in the edge, is fundamental to propose conservationist measures. The objective of this work was to carry out a phytosociological survey of adult tree species under edge effect and verify the floristic similarity among the plots. The work was developed in an area of 83,8 ha located in the municipality of Nazaré da Mata - PE. The sample area comprised 10.000 m², equivalent to the implantation of 10 contiguous transects of 10 x 100 m perpendicular to the edge. All tree individuals with CAP e" 15 cm were sampled, labeled and identified

  8. Group Decision Support System Determination Of Best Employee Using Topsis And Borda

    Directory of Open Access Journals (Sweden)

    Made Arya Budhi

    2017-07-01

    Full Text Available Determining the best employee at Lombok Garden inteded to stimulate the performance of the hotel employees Lombok Garden. Improved performance of employees it will have a direct effect on the quality of hotel services. Employee performance appraisement are conducted by six assessors, namely the head of each department and consists of several criteria. Assessments will be difficult if done manually considering each appraiser has its own preferences in assessment. To solve that problem, we need a computer system that helps decision-making is a group decision support system (GDSS determination of the best employees in the hotel Lombok Garden.Group decision support system developed in this study using TOPSIS (Technique For Order Preference By Similiarity To Ideal Solution and Borda to assist decision-making group. TOPSIS method is used for decision-making in each appraiser, while the Borda method used to combine the results of each assessor's decision so as to obtain the final result of the best employees in Lombok Garden.Based on the final result of the system of determination of the best employees in the form of a ranking of the final value of each employee. The highest value will be used as a recommendation as the best employee at Lombok Garden.

  9. Composição florística de trechos florestais na borda sul-amazônica Floristic composition of forest patches in Southern Amazonia

    Directory of Open Access Journals (Sweden)

    Natália Macedo Ivanauskas

    2004-09-01

    Full Text Available Este estudo apresenta a composição florística de trechos de uma faixa de vegetação de transição existente na região centro-leste do Estado de Mato Grosso, mais precisamente no município de Gaúcha do Norte (13° 10'S e 53° 15' O, onde dá-se o contato entre a Floresta Ombrófila e a Floresta Estacional. O levantamento florístico foi realizado em março de 1999 e bimestralmente a partir de agosto de 1999 até março de 2001, em excursões com duração média de 5 dias, por meio de caminhadas na borda e no interior de florestas, sendo coletadas fanerógamas em fase reprodutiva. Também foram incluídas amostras vegetativas de espécies arbustivo-arbóreas, que não floresceram ou frutificaram durante o período de amostragem, amostradas em 3ha destinados ao levantamento fitossociológico. O levantamento florístico resultou em 72 famílias, 168 gêneros e 268 espécies. Do total de espécies, 66% apresentaram hábito arbóreo e 18% foram lianas. As ervas e arbustos praticamente restringiram-se às áreas de borda ou clareiras, somando 13%. Já a flora epifítica mostrou-se pouco expressiva (1%, quando comparada ao restante da Amazônia, em conseqüência do clima regional mais seco. Hemiepífitas, parasitas e palmeiras constituíram o percentual restante. Constatou-se que 39 espécies amostradas em Gaúcha do Norte ainda não haviam sido depositadas em herbários que mantém coleções representativas da flora matogrossense, enfatizando a carência de coletas nas áreas florestais do Estado.This paper shows the floristic composition of forest patches in a zone of transition vegetation which exists in the central-east region of Mato Grosso state, more specifically in the municipality of Gaúcha do Norte (13° 10'S and 53° 15' W where it connects the tropical rain-forest and the seasonal forest. The floristic survey was performed in March 1999 and bisemesterly from August 1999 to March 2001 (during excursions of an average of five days

  10. Selecting the Acceptance Criteria of Medicines in the Reimbursement List of Public Health Insurance of Iran, Using the "Borda" Method: a Pilot Study.

    Science.gov (United States)

    Viyanchi, Amir; Rasekh, Hamid Reza; Rajabzadeh Ghatari, Ali; SafiKhani, Hamid Reza

    2015-01-01

    Decision-making for medicines to be accepted in Iran's public health insurance reimbursement list is a complex process and involves factors, which should be considered in applying a coverage for medicine costs. These processes and factors are not wholly assessed, while assessment of these factors is an essential need for getting a transparent and evidence-based approach toward medicine reimbursement in Iran. This paper aims to show an evidence-based approach toward medicine selection criteria to inform the medical reimbursement decision makers in Iranian health insurance organizations. To explore an adaptable decision-making framework while incorporating a method called "Borda" in medicine reimbursement assessment, we used the help of an expert group including decision makers and clinical researchers who are also policy makers to appraise the five chief criteria that have three sub criteria (Precision, Interpretability, and Cost). Also software "Math-lab"7, "SPSS" 17 and Excel 2007 were used in this study. "Borda" estimates the amount of perceived values from different criteria and creates a range from one to five while providing a comprehensive measurement of a large spectrum of criteria. Participants reported that the framework provided an efficient approach to systematic consideration in a pragmatic format consisting of many parts to guide decision-makings, including criteria and value (a model with the core of Borda) and evidences (medicine reimbursement based on criteria). The most important criterion for medicine acceptance in health insurance companies, in Iran, is the "life-threatening" factor and "evidence quality" is accounted as the fifth important factor. This pilot study showed the usefulness of incorporating Borda in medicine reimbursement decisions to support a transparent and systematic appraisal of health insurance companies' deeds. Further research is needed to advance Borda-based approaches that are effective on health insurance decision making.

  11. Oxidation of ethanol on NaX zeolite modified with transition metals

    Science.gov (United States)

    Mirzai, J. I.; Nadirov, P. A.; Velieva, A. D.; Muradkhanli, V. G.

    2017-06-01

    NaLaX, NaX + Co, and NaPdX catalysts are synthesized by modification of NaX zeolite with transition metals (La, Co, Pd). The activity of the prepared materials in catalytic ethanol oxidation is studied in the temperature range of 423-723 K. It is shown that NaPdX and NaX + Co accelerate the reactions of partial and complete oxidation of ethanol as the temperature rises. NaLaX accelerates both intramolecular and intermolecular dehydration of alcohol. It is shown that the NaPdX (1.0% Pd) sample has the highest activity in the complete oxidation of alcohol with the formation of CO2.

  12. Investigação da influência do processamento na dinâmica molecular de nanocompósitos de policarbonato e argila organofílica obtidos via intercalação por fusão

    Directory of Open Access Journals (Sweden)

    Elton J. da R. Rodrigues

    Full Text Available Nanocompósitos baseados em policarbonato e argila organofílica foram obtidos pelo método de intercalação por fusão em câmara de mistura sob diferentes valores de torque e temperatura. A influência desses parâmetros na qualidade da dispersão da argila na matriz polimérica foi investigada por ressonância magnética nuclear (RMN de baixo campo, empregando o tempo de relaxação longitudinal, T1H, e por difração de raios X. As diferenças nos tempos de relaxação longitudinal e nos padrões de difração de raios X foram correlacionadas com a formação de domínios com mobilidades distintas. O nanomaterial formado apresentou morfologia intercalada com afastamento crescente das camadas de argila, conforme as condições de processamento se tornavam mais severas. A RMN ¹H mostrou que tanto o cisalhamento quanto a temperatura afetaram a mobilidade das cadeias poliméricas, explicitando a homogeneidade crescente da distribuição dos domínios de relaxação, de acordo com o aumento do torque e da temperatura.

  13. Controlled phase stability of highly Na-active triclinic structure in nanoscale high-voltage Na2-2xCo1+xP2O7 cathode for Na-ion batteries

    Science.gov (United States)

    Song, Hee Jo; Kim, Jae-Chan; Dar, Mushtaq Ahmad; Kim, Dong-Wan

    2018-02-01

    With the increasing demand for high energy density in energy-storage systems, a high-voltage cathode is essential in rechargeable Li-ion and Na-ion batteries. The operating voltage of a triclinic-polymorph Na2CoP2O7, also known as the rose form, is above 4.0 V (vs. Na/Na+), which is relatively high compared to that of other cathode materials. Thus, it can be employed as a potential high-voltage cathode material in Na-ion batteries. However, it is difficult to synthesize a pure rose phase because of its low phase stability, thus limiting its use in high-voltage applications. Herein, compositional-engineered, rose-phase Na2-2xCo1+xP2O7/C (x = 0, 0.1 and 0.2) nanopowder are prepared using a wet-chemical method. The Na2-2xCo1+xP2O7/C cathode shows high electrochemical reactivity with Na ions at 4.0 V, delivering high capacity and high energy density.

  14. Discos de acresção em sistemas Be-X

    Science.gov (United States)

    Lopes de Oliveira, R.; Janot-Pacheco, E.

    2003-08-01

    Alguns fenômenos de outbursts em Be-X sugerem a existência, mesmo que temporária, de um disco de acresção quando da passagem do objeto compacto pelo periastro orbital. Neste trabalho avaliamos a possibilidade de formação do disco de acresção em sistemas Be+estrela de neutrons e Be+anã branca, e a influência da excentricidade orbital na ocorrência deste fenômeno. Utilizamos a expressão analítica para o momento angular específico da matéria constituinte de um meio em expansão lenta, como é o caso do disco circunstelar das estrelas Be, proposta por Wang(1981), sob a condição básica de que o raio de circularização deva ser maior do que o raio de Alfvén. Concluímos que existe um limite para o período orbital do sistema acima do qual não é possível a formação do disco de acresção, e que este valor aumenta para sistemas com excentricidade orbital maior.

  15. Synthesis of Na-A and/or Na-X zeolite/porous carbon composites from carbonized rice husk

    International Nuclear Information System (INIS)

    Katsuki, Hiroaki; Komarneni, Sridhar

    2009-01-01

    Na-A and/or Na-X zeolite/porous carbon composites were prepared under hydrothermal conditions by NaOH dissolution of silica first from carbonized rice husk followed by addition of NaAlO 2 and in situ crystallization of zeolites i.e., using a two-step process. When a one-step process was used, both Na-A and Na-X zeolites crystallized on the surface of carbon. Na-A or Na-X zeolite crystals were prepared on the porous carbonized rice husk at 90 deg. C for 2-6 h by changing the SiO 2 /Al 2 O 3 , H 2 O/Na 2 O and Na 2 O/SiO 2 molar ratios of precursors in the two-step process. The surface area and NH 4 + -cation exchange capacity (CEC) of Na-A zeolite/porous carbon were found to be 171 m 2 /g and 506 meq/100 g, respectively, while those of Na-X zeolite/porous carbon composites were 676 m 2 /g and 317 meq/100 g, respectively. Na-A and Na-X zeolites are well-known microporous and hydrophilic materials while carbonized rice husk was found to be mesoporous (pores of ∼3.9 nm) and hydrophobic. These hybrid microporous-mesoporous and hydrophilic-hydrophobic composites are expected to be useful for decontamination of metal cations as well as organic contaminants simultaneously. - Graphical Abstract: Novel Na-X zeolite/porous carbon composite.

  16. Characterization of Nafion ionomer and its change due to X radiation; Caracterizacao do ionomero Nafion e sua modificacao por irradiacao de raios X

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Selma Helena de

    1996-07-01

    In this study, first the characterization of Nafion-117 membranes in the acid form (Nafion-H) and in the salt forms (Na{sup +}, K{sup +}, Rb{sup +} and Cs{sup +}) was performed. In another step, the X-ray effects on membranes (Nafion-H and Nafion-Na) were investigated. The samples were irradiated with X-ray, at 160 kGy/h, with 80-1280 kGy dosages. The characterization of samples (irradiated and unirradiated samples) was performed by X-ray diffractometry, vibrational spectroscopy (photoacoustic in infrared region and Raman scattering), electronic absorption spectroscopy (UV/Vis), electronic paramagnetic resonance spectroscopy (EPR) and thermal analysis (TG and DCS). The studies showed that the membranes submitted to high temperature or to hydration structural changes, as evidence by IR and UV/Vis spectra and DSC curves. This behavior can be assigned to the reorganization of the clusters, resulting in redistribution of the ions and reorientation of the polymers. UV/Vis spectra and DSC curves indicates that the conformational changes induced by temperature and hydration effect continue to occur slowly in the membrane due to relaxation of the polymer. TG analysis indicated that the thermal decomposition mechanism by Nafion-H is different from the mechanism by Nafion-Na. Nafion-H membranes degraded in at least three stages, while Nafion-Na membranes, which showed higher thermal stability than Nafion-H, degraded in only one stage. For irradiation dose higher than 320 kGy, the samples became brittle, which enhanced with increasing doses. This behavior indicates that the predominant effect was the chain scission. The results obtained by different technique showed that the main effects of X-rays on Nafion membranes are the following: decrease in the mechanical properties, peroxy radical production, formation of unsaturated species (C=C and C=O), scissions in the C-O and C-S bonds and SO{sub 2} production. The Nafion-Na membrane showed higher thermal stability and higher

  17. Caracterização e classificação de solos graníticos em topossequência na região Sul do Brasil

    Directory of Open Access Journals (Sweden)

    Paula Suélen Corrêa de Medeiros

    2013-07-01

    Full Text Available Na região sul do Brasil, foi verificada a ocorrência de forte gradiente textural em solos localizados em áreas de morros graníticos. O presente estudo teve como objetivo avaliar os processos pedogenéticos envolvidos na formação de solos em topossequência de granito em Porto Alegre (RS. Foram descritos e amostrados morfológica, química, física e mineralogicamente quatro perfis de solos localizados em diferentes segmentos da paisagem. Os perfis de solos do topo, encosta superior e sopé da topossequência apresentaram gradiente textural expressivo, e a relação argila fina:argila total aumentou nos horizontes subsuperficias (Bt, indicando transporte da fração mais fina. O índice de uniformidade inferior a 0,6 sugeriu que os solos não apresentaram indícios de descontinuidade litológica. O índice Ki, a relação Fe2O3d/Fe2O3s e a presença de feldspato e minerais 2:1 e 2:1:1, constatadas pela difração de raios-x indicaram grau de intemperismo intermediário. A difração por raios x também mostrou aumento do argilomineral caulinita em profundidade. Na encosta inferior, o perfil de solo não apresentou horizonte B pedogenético. Os resultados são indicativos da ocorrência da lessivagem como o principal processo pedogenético atuante, apesar das características indicativas de estádio de intemperismo pouco avançado.

  18. Espectroscopia de refletância e emissividade de rochas fosfáticas ígneas e sedimentares do centro-oeste do Brasil : estudos de caso nos depósitos de Catalão I (GO), Tapira (MG), Rocinha e Lagamar (MG) = Reflectance and emissivity spectroscopy of igneous and sedimentary rocks from Midwest Brazil: case study of the Catalão I (GO), Tapira (MG), Rocinha and Lagamar deposits

    OpenAIRE

    Emanuel Amorer Hernández

    2013-01-01

    Resumo: A pesquisa compreende estudos sobre a assinatura ultraespectral e multiespectral de fosfatos de origem ígnea e sedimentar contidos, respectivamente, nos depósitos de Catalão I (GO), Tapira (MG) e Rocinha-Lagamar (MG), centro-oeste do Brasil. Medidas de reflectância e emissividade (focadas na faixa de 8-12µm) foram analisadas em conjunto com dados de Difração de Raios X e Fluorescência de Raios X visando a determinação da mineralogia e quimismo das rochas envolvidas nas áreas de estudo...

  19. Effect of γ- Ray Irradiation on the Solid Ionic Conductor of (Cul)x(Na3PO4)1-X Materials (x= 0.1 and x= 0.3)

    International Nuclear Information System (INIS)

    Purwanto, P.

    2008-01-01

    Study on the effect of γ- ray irradiation on solid state conductor (Cul) x (Na 3 PO 4 ) 1-X have been done. The solid ionic conductor of (Cul) x (Na 3 PO 4 ) 1-X (x= 0.1 and x= 0.3) had been made by mixing Cul with Na 3 PO 4 by formula of (Cul) x (Na 3 PO 4 ) 1-X where x= 0.1 and x= 0.3 then pressed with 48.26 x 10 6 N/m 2 into pellete in diametre 1.5 x 10 - 2 m. The solid ionic conductor was then γ- ray irradiated with dose of 5 to 30 kGy. The result showed that the structure of (Cul) x (Na 3 PO 4 ) 1-X was Cul and Na 3 PO 4 . Crystall lattice strain of (Cul) x (Na 3 PO 4 ) 1-X were measured stable against the influence of radiation. The conductivity measurement of (Cul) x (Na 3 PO 4 ) 1-X was carried out by LCR at the frequence of 0.1 Hz to 100 kHz. The result showed that the conductivities of (Cul) x (Na 3 PO 4 ) 1-X after irradiation were increasing with radiation dose. (author)

  20. Thermodynamic modeling of the Na-X (X = Si, Ag, Cu, Cr systems

    Directory of Open Access Journals (Sweden)

    Hao D.

    2012-01-01

    Full Text Available The Na-X (X = Si, Ag, Cu, Cr systems have been critically reviewed and modeled by means of the CALPHAD approach. The two compounds, NaSi and Ag2Na, are treated as stoichiometric ones. By means of first-principles calculations, the enthalpies of formation at 0 K for the LT-NaSi (low temperature form of NaSi and Ag2Na have been computed to be -5210 and -29821.8 Jmol-1, respectively, with the desire to assist thermodynamic modeling. One set of self-consistent thermodynamic parameters is obtained for each of these binary systems. Comparisons between calculated and measured phase diagrams show that most of the experimental information can be satisfactorily accounted for by the present thermodynamic descriptions.

  1. Avaliação da morfologia interna de sementes de Acca sellowiana O. Berg por meio de análise de imagens

    Directory of Open Access Journals (Sweden)

    Vanessa Neumann Silva

    2013-12-01

    Full Text Available Acca sellowiana O. (Berg Burret é uma fruteira nativa da região Sul do Brasil e do Uruguai, que apresenta grande potencial de uso na recuperação de áreas degradadas. O objetivo deste trabalho foi avaliar a morfologia interna de sementes de Acca sellowiana O. Berg por meio da análise de imagens de raios X e relacionar os resultados com a germinação das sementes. Sementes de Acca sellowiana O. Berg, representadas por três lotes, foram analisadas pelo teste de raios X e, posteriormente, conduzidas ao teste de germinação, com avaliação aos 44 dias após a semeadura. As imagens de raios X foram analisadas com o software ImageJ. A análise das imagens radiográficas de sementes de Acca sellowiana permite a mensuração das áreas internas livres, assim como a determinação da relação entre estas e a germinação. Danos internos detectados por meio de raios X afetam a germinação das sementes.

  2. Synthesis of zeolites Na-A and Na-X from tablet compressed and calcinated coal fly ash

    Science.gov (United States)

    Hu, Tao; Gao, Wenyan; Liu, Xin; Zhang, Yifu; Meng, Changgong

    2017-10-01

    Zeolites Na-A and Na-X are important synthetic zeolites widely used for separation and adsorption in industry. It is of great significance to develop energy-efficient routines that can synthesize zeolites Na-A and Na-X from low-cost raw materials. Coal fly ash (CFA) is the major residue from the combustion of coal and biomass containing more than 85% SiO2 and Al2O3, which can readily replace the conventionally used sodium silicate and aluminate for zeolite synthesis. We used Na2CO3 to replace the expensive NaOH used for the calcination of CFA and showed that tablet compression can enhance the contact with Na2CO3 for the activation of CFA through calcination for the synthesis of zeolites Na-A and Na-X under mild conditions. We optimized the control variables for zeolite synthesis and showed that phase-pure zeolite Na-A can be synthesized with CFA at reactant molar ratio, hydrothermal reaction temperature and reaction time of 1.3Na2O: 0.6Al2O3: 1SiO2: 38H2O at 80°C for 6 h, respectively, while phase-pure zeolite Na-X can be synthesized at 2.2Na2O: 0.2Al2O3: 1SiO2: 88H2O at 100°C for 8 h, respectively. The composition, morphology, specific surface area, vibration spectrum and thermogravimetry of synthesized Na-A and Na-X were further characterized.

  3. Avaliação do campo de tensões residuais por difração de raios - X utilizando o método do sen²ψ em revestimentos metálicos do aço inoxidável E308-L

    Directory of Open Access Journals (Sweden)

    Raphael. H. F. Melo

    2013-03-01

    Full Text Available A aplicação por soldagem de revestimentos metálicos de aços e ligas nobres resistentes à corrosão é uma alternativa bastante razoável economicamente frente à fabricação de componentes maciços nestas ligas. Entretanto há uma carência de informações sobre as alterações mecânico/metalúrgicas causadas pelos ciclos térmicos de soldagem quando da aplicação destes revestimentos, principalmente sobre a influência sobre o nível de tensões residuais , que é mister no entendimento do fenômeno da corrosão assistida por tensão. O objetivo deste trabalho foi avaliar o nível de tensões residuais superficiais em revestimentos do aço inoxidável AWS E308-L T-1 aplicados pelo processo de soldagem ao Arco Elétrico com Arame Tubular sobre chapas do aço ASTM A36. As medições das tensões residuais foram realizadas por um difratômetro portátil de raios - X na superfície dos revestimentos e os principais resultados obtidos foram que a natureza das tensões residuais na superfície dos revestimentos sempre se apresentou compressivas e não observou-se uma linearidade da magnitude das tensões residuais em função da energia de soldagem.

  4. Microstructural characterization of industrial foams by gamma ray transmission and X-ray microtomography; Caracterizacao microestrutural de espumas industriais por transmissao de raios gama e microtomografia de raios X

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, Luiz Eduardo

    2004-07-01

    This work presents the total porosity measurements of the aluminum and silicon carbide (SiC) foams samples. For porosity determination the gamma ray transmission and X-ray microtomography with conic beam techniques were used. These methods have more advantage than conventional ones, because they are non destructive and provide more details of the analyzed material porous structure. The aluminum foam samples with 10, 20, 30, 40 and 45 ppi (pores per inch) and SiC ceramic foam samples with 20, 30, 45, 60, 75, 80 and 90 ppi were analysed by gamma transmission. The SiC 60, 75 and 90 ppi samples were also analyzed by X-ray microtomography. For the gamma ray transmission measurements it was used an {sup 241} Am source (59.53 keV), a NaI(Tl) scintillation detector, collimators, a XYZ micrometric table and standard gamma spectrometry electronics connected to a multichannel analyzer, at the LFNA/UEL. For the X-ray microtomographic measurements, the Fein Focus X-ray system of the Nuclear Instrumentation Laboratory of the COPPE, located at the Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ, was used. This equipment provide us images with micrometric resolution (53.48 {mu}m) using a conic X-ray beam and bidimensional detection. The microtomographic images were pre-processed and analyzed by the Imago software, developed at Porous Media and Materials Thermophysical Properties Laboratory (LMPT) of the Mechanical Engineering Department, located at Universidade Federal de Santa Catarina, Florianopolis, SC. Employing the The Imago software it was calculated the total porosity, pore size distribution and autocorrelation function C(u) of the binarized microtomographic images of the each sample. The microtomographic 3-D image of each sample was compared with 3-D image reconstructed by the Gaussian truncated method. This method generates a periodic 3-D porous structure by using of the autocorrelation function of one 2-D cross sectional image of the sample. (author)

  5. X-diffraction technique applied for nano system metrology; Tecnica de difracao de raios X aplicada na metrologia de nanossistemas

    Energy Technology Data Exchange (ETDEWEB)

    Kuznetsov, Alexei Yu.; Machado, Rogerio; Robertis, Eveline de; Campos, Andrea P.C.; Archanjo, Braulio S.; Gomes, Lincoln S.; Achete, Carlos A., E-mail: okuznetsov@inmetro.gov.b [Instituto Nacional de Metrologia, Normalizacao e Qualidade Industrial (DIMAT/INMETRO), Duque de Caxias, RJ (Brazil). Div. de Metrologia de Materiais

    2009-07-01

    The application of nano materials are fast growing in all industrial sectors, with a strong necessity in nano metrology and normalizing in the nano material area. The great potential of the X-ray diffraction technique in this field is illustrated at the example of metals, metal oxides and pharmaceuticals

  6. A neural network potential energy surface for the NaH2 system and dynamics studies on the H(2S) + NaH(X1Σ+) → Na(2S) + H2(X1Σg+) reaction.

    Science.gov (United States)

    Wang, Shufen; Yuan, Jiuchuang; Li, Huixing; Chen, Maodu

    2017-08-02

    In order to study the dynamics of the reaction H( 2 S) + NaH(X 1 Σ + ) → Na( 2 S) + H 2 (X 1 Σ g + ), a new potential energy surface (PES) for the ground state of the NaH 2 system is constructed based on 35 730 ab initio energy points. Using basis sets of quadruple zeta quality, multireference configuration interaction calculations with Davidson correction were carried out to obtain the ab initio energy points. The neural network method is used to fit the PES, and the root mean square error is very small (0.00639 eV). The bond lengths, dissociation energies, zero-point energies and spectroscopic constants of H 2 (X 1 Σ g + ) and NaH(X 1 Σ + ) obtained on the new NaH 2 PES are in good agreement with the experiment data. On the new PES, the reactant coordinate-based time-dependent wave packet method is applied to study the reaction dynamics of H( 2 S) + NaH(X 1 Σ + ) → Na( 2 S) + H 2 (X 1 Σ g + ), and the reaction probabilities, integral cross-sections (ICSs) and differential cross-sections (DCSs) are obtained. There is no threshold in the reaction due to the absence of an energy barrier on the minimum energy path. When the collision energy increases, the ICSs decrease from a high value at low collision energy. The DCS results show that the angular distribution of the product molecules tends to the forward direction. Compared with the LiH 2 system, the NaH 2 system has a larger mass and the PES has a larger well at the H-NaH configuration, which leads to a higher ICS value in the H( 2 S) + NaH(X 1 Σ + ) → Na( 2 S) + H 2 (X 1 Σ g + ) reaction. Because the H( 2 S) + NaH(X 1 Σ + ) → Na( 2 S) + H 2 (X 1 Σ g + ) reaction releases more energy, the product molecules can be excited to a higher vibrational state.

  7. Paraquat adsorption on NaX and Al-MCM-41.

    Science.gov (United States)

    Rongchapo, Wina; Deekamwong, Krittanun; Loiha, Sirinuch; Prayoonpokarach, Sanchai; Wittayakun, Jatuporn

    2015-01-01

    The aim of this work is to determine paraquat adsorption capacity of zeolite NaX and Al-MCM-41. All adsorbents were synthesized by hydrothermal method using rice husk silica. For Al-MCM-41, aluminum (Al) was added to the synthesis gel of MCM-41 with Al content of 10, 15, 20 and 25 wt%. The faujasite framework type of NaX and mesoporous characteristic of Al-MCM-41 were confirmed by X-ray diffraction. Surface area of all adsorbents determined by N2 adsorption-desorption analysis was higher than 650 m2/g. Al content and geometry were determined by X-ray fluorescence and 27Al nuclear magnetic resonance, respectively. Morphology of Al-MCM-41 were studied by transmission electron microscopy; macropores and defects were observed. The paraquat adsorption experiments were conducted using a concentration range of 80-720 mg/L for NaX and 80-560 mg/L for Al-MCM-41. The paraquat adsorption isotherms from all adsorbents fit well with the Langmuir model. The adsorption capacity of NaX was 120 mg/g-adsorbent. Regarding Al-MCM-41, the 10% Al-MCM-41 exhibited the lowest capacity of 52 mg/g-adsorbent while the other samples had adsorption capacity of 66 mg/g-adsorbent.

  8. Fabrication and Application of (1-x) NaCl+xKCl Solid Solution

    International Nuclear Information System (INIS)

    Kyi Kyi Lwin

    2011-12-01

    (1-X)NaCl+xKCl solid solution are prepared by the starting materials NaCl (0.9, 0.95) in equal molar ratio. The solid solutions are heat-treated at various temperature and XRD analyses are carried out for the solid solutions to examine the crystalline phase, crystallographic orientation and lattice parameters. The electrical properties of the solutions are determined by using the conductometer. The solid solutions are utilized as crystal oscillator and outcoming frequencies, capacitances and dielectric constants are also investigated.

  9. HT-solution growth and characterisation of In{sub x}Na{sub x}Mn{sub 1-2x}WO{sub 4} (0

    Energy Technology Data Exchange (ETDEWEB)

    Gattermann, U. [Sektion Kristallographie, Department für Geo- und Umweltwissenschaften, Ludwig-Maximilians-Universität München, Theresienst rasse 41, D-80333 Munich (Germany); Park, S.-H., E-mail: sohyun.park@lmu.de [Sektion Kristallographie, Department für Geo- und Umweltwissenschaften, Ludwig-Maximilians-Universität München, Theresienst rasse 41, D-80333 Munich (Germany); Paulmann, C. [Geowissenschaften, Fakultät für Mathematik, Informatik und Naturwissenschaften, Universität Hamburg, Grindelallee 48, D-20146 Hamburg (Germany); Benka, G.; Pfleiderer, C. [Physik-Department, Technische Universität München, James-Franck-Strasse 1, D-85748 Garching (Germany)

    2016-12-15

    A new solid solution system, In{sub x}Na{sub x}Mn{sub 1–2x}WO{sub 4} (0<x=≤0.26) belonging to the MnWO{sub 4}-type multiferroics was investigated. Large single crystals were grown up to several mm in length from high-temperature oxide solutions using a solvent mixture of Na{sub 2}WO{sub 4} and Na{sub 2}W{sub 2}O{sub 7}. Quantitative doping degrees were analyzed by means of electron microprobe. Single crystal X-ray diffraction studies agreed with the polar space group P2 for In{sub x}Na{sub x}Mn{sub 1–2x}WO{sub 4}. The complexity of partial (Na{sup +}/Mn{sup 2+})- and (In{sup 3+}/Mn{sup 2+})-ordering makes their atomic sites unique, explaining the dissymmetrization from P2/c down to P2. This is also valid for the InNaW{sub 2}O{sub 8}-type Mn{sub 2y}In{sub 1-y}Na{sub 1-y}W{sub 2}O{sub 8} solid solution found as co-product in this study. Specific heat and magnetisation measurements showed a paramagnetic dilution effect from (In{sup 3+}/Na{sup +})-doping while lowering the transition temperature for the multiferroic phase AF2 of In{sub x}Na{sub x}Mn{sub 1–2x}WO{sub 4} with respect to the prototype MnWO{sub 4}. - Graphical abstract: A volume expansion around Mn2 site by (In, Na)-doping is drawn by the atomic shifts in a Mn2O{sub 6} octahedron in the atomistic structure of In{sub 0.20(2)}Na{sub 0.17(2)}Mn{sub 0.63(4)}WO{sub 4} from the respective atomic positions of In-free MnWO{sub 4}. The size and direction of arrows are scaled up for indicating the consequent local distortion. - Highlights: • HT solution crystal growth of (In, Na):MnWO{sub 4}-solid-solution compounds. • Polar space group symmetry P2 for their atomistic structures. • Magnetic properties of the multiferroic phase AF2 by (In{sup 3+}, Na{sup +})-doping. • Magnetic phase transitions.

  10. Lanthanide-doped Na xScF 3+ x nanocrystals: Crystal structure evolution and multicolor tuning

    KAUST Repository

    Teng, Xue

    2012-05-23

    Rare-earth-based nanomaterials have recently drawn considerable attention because of their unique energy upconversion (UC) capabilities. However, studies of Sc 3+-based nanomaterials are still absent. Herein we report the synthesis and fine control of Na xScF 3+x nanocrystals by tuning of the ratio of oleic acid (OA, polar surfactant) to 1-octadecene (OD, nonpolar solvent). When the OA:OD ratio was increased from low (3:17) to high (3:7), the nanocrystals changed from pure monoclinic phase (Na 3ScF 6) to pure hexagonal phase (NaScF 4) via a transition stage at an intermediate OA:OD ratio (3:9) where a mixture of nanocrystals in monoclinic and hexagonal phases was obtained and the coexistence of the two phases inside individual nanocrystals was also observed. More significantly, because of the small radius of Sc 3+, Na xScF 3+x:Yb/Er nanocrystals show different UC emission from that of NaYF 4:Yb/Er nanocrystals, which broadens the applications of rare-earth-based nanomaterials ranging from optical communications to disease diagnosis. © 2012 American Chemical Society.

  11. Sistema de alerta de ocorrência de raios utilizando rede de sensores de campo elétrico atmosférico

    OpenAIRE

    Flávio de Carvalho Magina

    2016-01-01

    Há evidências de que o clima global está mudando e aumentos de eventos extremos, como tempestades severas, estão previstos para o futuro. As descargas elétricas atmosféricas, mais precisamente as descargas nuvem-solo ou raios, são uma característica das tempestades que causam perdas de vidas e danos aos empreendimentos e que, tendem a aumentar com o aumento das tempestades. No Brasil, morrem mais de uma centena de pessoas por ano atingidas por raios e prejuízos econômicos anuais de cerca de u...

  12. Metodologia da manutenção centrada em confiabilidade aplicada a pára-raios de alta tensão

    OpenAIRE

    Britto, Tales Marques de

    2006-01-01

    Dissertação (mestrado) - Universidade Federal de Santa Catarina, Centro Tecnológico. Programa de Pós-Graduação em Engenharia Elétrica Este trabalho de dissertação apresenta a aplicação da metodologia da Manutenção Centrada em Confiabilidade (MCC) em pára-raios de alta tensão, como forma de apoio à tomada de decisão em um sistema de Análise e Diagnóstico de Equipamentos de Subestações de Transmissão de Energia (DianE). Este trabalho aborda o equipamento pára-raios descrevendo suas caracterí...

  13. A Study of the Distribution of Sodium Cations in the Zeolites NaX, NaY and ZnNaY Using Carbon Monoxide Adsorption and 23Na NMR Techniques

    Science.gov (United States)

    Seidel, A.; Boddenberg, B.

    1995-03-01

    The zeolites NaX, NaY, Zn(55)NaY, and Zn(74)NaY were investigated by means of carbon monoxide adsorption and with static and magic angle spinning (MAS) 23Na NMR spectroscopy. The Na+ distribution between the sodalite (ß)- and supercages of the fully hydrated zeolites NaX and NaY were found to agree with XRD results. In the hydrated zinc-exchanged zeolites the Na+ ions almost exclusively populate the ß-cages. The adsorption isotherms of CO in the dehydrated zeolites were analyzed quantitatively to yield the concentrations of Na+ residing in the supercages. The measured static and MAS 23Na NMR spectra were analyzed by comparing their widths and shapes with simulated central transition patterns and yield, inter alia, the concentrations of Na+ associated with the spectrum components. Arguments are put forward that 23Na NMR of dehydrated zeolites is well suited to distinguish Na+ cations in highly symmetric environments and mobile Na+ species from others located on general positions, but further resolution is hardly feasible.

  14. Análise da pluviosidade e do efeito de borda sobre os teores de flavonóides em Bauhinia cheilantha (Bong. Steud., Fabaceae

    Directory of Open Access Journals (Sweden)

    Tadeu J. da S. Peixoto Sobrinho

    Full Text Available Este estudo avaliou a influência do efeito de borda e da pluviosidade sobre a produção de flavonóides em indivíduos de Bauhinia cheilantha (Bong. Steud., Fabaceae, em uma área de caatinga no estado de Pernambuco, Nordeste do Brasil. Foi utilizada metodologia analítica por complexação com cloreto de alumínio para quantificar a concentração de flavonóides contidos nos extratos foliares de B. cheilantha, por meio de espectrofotometria no visível. De forma geral, o efeito de borda afeta a produção de flavonóides, entretanto, não foi possível correlacionar a produção de flavonóides e a pluviosidade, demonstrando que a espécie avaliada utiliza outra estratégia como resposta às pressões ambientais.

  15. Detection of beetle damage in forests by X-ray CT image processing Detecção de danos causados por besouro em florestas com processamento de imagens de tomografia computadorizada de raios X

    Directory of Open Access Journals (Sweden)

    Paulo Estevão Cruvinel

    2003-10-01

    Full Text Available Some beetle species can have devastating economic impacts on forest and nursery industries. A recent example is Anophophora glabripennis, a species of beetle known in the United States as the ''Asian Longhorrned beetle'', which has damaged many American forests, and is a threat which can unintentionally reach south American countries, including Brazil. This work presents a new method based on X-ray computerized tomography (CT and image processing for beetle injury detection in forests. Its results show a set of images with correct identification of the location of beetles in living trees as well as damage evaluation with time.Algumas espécies de besouros têm elevado impacto econômico em florestas e indústrias de móveis. Exemplo recente é aquele produzido pelo besouro Anophophora glabripennis, uma espécie conhecida nos Estados Unidos como Asian Longhorn, que tem produzido danos significativos em várias florestas americanas, representando uma ameaça que poderá encontrar transporte não-intencional para países da América do Sul, inclusive para o Brasil. Neste trabalho é apresentado um novo método com base no uso de tomografia de raios X computadorizada (CT e processamento de imagens digitais para detecção de injúrias causadas por besouros em florestas. Os resultados mostram a correta identificação da localização de besouros em árvores vivas, como também fornecem uma avaliação do estrago temporal causado.

  16. Synthesis, characterization and application of nanozeolite NaX from Vietnamese kaolin

    International Nuclear Information System (INIS)

    Ngoc, Don Ta; Pham, Thanh Huyen; Hong Nguyen, Khanh Dieu

    2013-01-01

    This paper presents the results of synthesis of nanozeolite NaX from Vietnamese kaolin. Influence factors on the control of crystal sizes and application of synthesized materials as adsorbent for organic compound are discussed. The results show that there are several factors that influence the synthesis. When water content in gel increases, crystal size of NaX increases sharply. The increase of alkaline and silica contents increases the crystallinity and decreases the particle size of nano NaX, and the particle size reaches the minimum at Na 2 O/Al 2 O 3 = 5.0 and SiO 2 /Al 2 O 3 = 4.0. Crystal sizes formed at low crystallizing temperature are smaller than those formed at higher temperature. Ageing time and crystallizing time strongly influence the crystallinity and crystal size, which is related to the number of crystal seeds formed during ageing period, the growth of seed and the partial solubility of crystal at maximum formation. Nano NaX was characterized by x-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET) adsorption, Fourier transform infrared (FTIR) and simultaneous thermogravimetry–differential scanning calorimetry (TG/DSC). At optimized synthesis conditions, nano NaX has surface area of 573 m 2 g −1 with external surface area of 92 m 2 g −1 , pore size distribution at 0.81 and 10.8 nm, average crystal size of 25 nm and thermal stability up to 789 °C. This material can adsorb cumene rapidly with high adsorption capacity and stability. (paper)

  17. Fenologia reprodutiva, polinização e frutificação de Heliconia spathocircinata Aristeg. (Heliconiaceae em fragmento de Floresta Atlântica do município do Rio de Janeiro

    Directory of Open Access Journals (Sweden)

    Caio César Corrêa Missagia

    2011-07-01

    Este estudo apresenta aspectos da fenologia e da biologia reprodutiva de Heliconia spathocircinata Aristeg. em áreas de borda e interior de um fragmento de Mata Atlântica no município do Rio de Janeiro, Brasil. Quatro parcelas de 10x10m foram delimitadas, duas na borda e duas no interior da mata, e indivíduos de H. spathocircinata foram monitorados de junho de 2009 a junho de 2010. As observações foram realizadas das 6:00 às 18:00 horas, semanalmente em dezembro e janeiro, e quinzenalmente no restante da floração. Heliconia spathocircinata floresce entre novembro e março. Seus frutos encontram-se maduros dois meses após a polinização. A proporção flores-frutos foi em média 66,6% no interior e 27% na borda da mata. Machos do beija-flor Thalurania glaucopis Gmelin correspondem ao polinizador mais frequente em todas as parcelas estudadas, o segundo polinizador mais frequente nas quatro parcelas foram fêmeas desta mesma espécie. Phaethornis ruber L. foi o terceiro polinizador mais frequente nas quatro parcelas, Ramphodon naevius Dumont somente foi observado no interior da mata, sendo o quarto polinizador mais frequente nas duas parcelas. Eupetomena macroura Gmelin e Amazilia fimbriata Gmelin foram observados somente nas parcelas de borda, são o quarto e quinto polinizador mais frequentes em ambas as parcelas.

  18. Evaluation of photocatalytic activities of supported catalysts on NaX zeolite or activated charcoal

    Energy Technology Data Exchange (ETDEWEB)

    Brites-Nóbrega, Fernanda F. de [Chemical Engineering Department, Universidade Estadual de Maringá (UEM), Av. Colombo, 5790, CEP 87020-900 Maringá, PR (Brazil); Sanitary and Environmental Engineering Department, Universidade Federal de Minas Gerais (UFMG), Av. Antônio Carlos, 6627, Campus Pampulha, Belo Horizonte, MG (Brazil); Polo, Aldino N.B.; Benedetti, Angélica M. [Chemical Engineering Department, Universidade Estadual do Oeste do Paraná (UNIOESTE), Rua da Faculdade, 645, CEP 85903-000 Toledo, PR (Brazil); Leão, Mônica M.D. [Sanitary and Environmental Engineering Department, Universidade Federal de Minas Gerais (UFMG), Av. Antônio Carlos, 6627, Campus Pampulha, Belo Horizonte, MG (Brazil); Slusarski-Santana, Veronice, E-mail: veronice.santana@unioeste.br [Chemical Engineering Department, Universidade Estadual do Oeste do Paraná (UNIOESTE), Rua da Faculdade, 645, CEP 85903-000 Toledo, PR (Brazil); Fernandes-Machado, Nádia R.C. [Chemical Engineering Department, Universidade Estadual de Maringá (UEM), Av. Colombo, 5790, CEP 87020-900 Maringá, PR (Brazil)

    2013-12-15

    Highlights: • The synergic effect between ZnO and NaX was positive, which increased its activity. • The best results were obtained at pH 3 and 9 with ZnO/NaX and at pH 3 with Nb{sub 2}O{sub 5}/AC. • High degradation and considerable mineralization were attained with 10% ZnO/NaX. • ZnO and Nb{sub 2}O{sub 5} supported on NaX and AC are promising alternatives as photocatalysts. -- Abstract: This study aimed to evaluate the photocatalytic activity of ZnO and Nb{sub 2}O{sub 5} catalysts, both supported on NaX zeolite and activated charcoal (AC). The synergistic effect between oxide and support and the influence of solution pH (3, 7 and 9) on photocatalytic degradation of reactive blue 5G (C.I. 222) were analyzed. The catalysts Nb{sub 2}O{sub 5}/NaX, Nb{sub 2}O{sub 5}/AC and ZnO/NaX, ZnO/AC with 5 and 10% (wt%) were prepared by wet impregnation. The results showed that the catalysts exhibit quite different structural and textural properties. The synergic effect between ZnO and NaX support was higher than that with the activated charcoal, showing that these catalysts were more efficient. The most photoactive catalyst was 10% ZnO/NaX which showed 100% discoloration of the dye solution at pH 3, 7 and 9 after 0.5, 5 and 2 h of irradiation, respectively. The hydrolytic nature of zeolite favored the formation of surface hydroxyl radicals, which increased the activity of the photocatalyst. Thus, catalysts supported on NaX zeolite are promising for use in photocatalysis.

  19. XYO{sub 3} (X = K, Na; Y = Nb, Ta) based superlattices for photocatalysis

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Guang-Zhao; Chen, Xiao-Rui; Yuan, Hong-Kuan; Kuang, An-Long [School of Physical Science and Technology, Southwest University, Chongqing 400715 (China); Chen, Hong [School of Physical Science and Technology, Southwest University, Chongqing 400715 (China); Key Laboratory of Luminescent and Real-Time Analytical Chemistry, Ministry of Education, College of Chemistry and Chemical Engineering, Southwest University, Chongqing 400715 (China)

    2017-05-15

    The photocatalytic activities of XYO{sub 3} (X = K, Na; Y = Ta, Nb) and XYO{sub 3}/X1Y1O{sub 3} (X, X1 = K, Na; Y, Y1 = Ta, Nb) systems are investigated by using hybrid density functional. All the XYO{sub 3} and XYO{sub 3}/X1Y1O{sub 3} systems are indirect band gap semiconductors, and the band gap of KNbO{sub 3}/KTaO{sub 3} is smaller than those of KNbO{sub 3} and KTaO{sub 3}, while the band gaps of KNbO{sub 3}/NaNbO{sub 3}, KNbO{sub 3}/NaTaO{sub 3}, KTaO{sub 3}/NaNbO{sub 3}, KTaO{sub 3}/NaTaO{sub 3}, and NaNbO{sub 3}/NaTaO{sub 3} are respectively between the band gaps of these two crystals which make up these superlattices. The electronic structure of KNbO{sub 3}/NaTaO{sub 3} is the same as that of KTaO{sub 3}/NaNbO{sub 3} since both have the same component and similar crystal structure. The band edges of all the considered superlattices are thermodynamically allowed for the water reduction and oxidation processes, and therefore, they could be used for photocatalytic water splitting. Band structures for (i) KNbO{sub 3}/KTaO{sub 3}, (ii) KNbO{sub 3}/NaNbO{sub 3}, (iii) KNbO{sub 3}/NaTaO{sub 3}, (iv) KTaO{sub 3}/NaNbO{sub 3}, (v) KTaO{sub 3}/NaTaO{sub 3}, and (vi) NaNbO{sub 3}/NaTaO{sub 3} superlattices. The horizontal dashed lines represent the Fermi levels. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  20. Síntese e caracterização de La1-X SrX MnO3±δ e La1-X SrX Co1-Y FeY O3-δ utilizados como catodo em células a combustível de óxido sólido Synthesis and characterization of La1-X SrX MnO3± δ and La1-X SrX Co1-Y FeY O3- δ used as cathode in solid oxide fuel cells

    Directory of Open Access Journals (Sweden)

    R. A. Vargas

    2008-09-01

    Full Text Available Na síntese de materiais, muitos desafios estão relacionados com propriedades requeridas, levando pesquisadores a buscarem materiais alternativos que possuam características adequadas para funcionarem como componentes nas células a combustível de óxido sólido. Atualmente, os materiais mais estudados como catodos são os óxidos mistos La1-X SrX MnO3±δ e La1-X SrX Co1-Y FeY O3-δ. Neste trabalho utilizaram-se como precursores os nitratos dos respectivos elementos químicos. O objetivo é apresentar algumas características físicas, químicas e microestruturais desses materiais, obtidos pela técnica dos citratos. As principais análises utilizadas para caracterização foram: análise termogravimétrica, calorimetria diferencial de varredura, picnometria por gás hélio, fluorescência de raios X, cromatografia de absorção gasosa, distribuição granulométrica por espalhamento laser, adsorção gasosa, difração de raios X e microscopia eletrônica de varredura. Os resultados mostram que as composições estudadas contem partículas homogêneas com presença de carbono residual, áreas de superfícies específicas adequadas e tamanho médio de partículas inferiores a 1 mm. As propriedades estudadas estão compatíveis com dados da literatura. Conclui-se que os compostos sintetizados possibilitam o estudo e preparação de suspensões cerâmicas para fabricação de filmes finos.In the synthesis of ceramic materials, new challenges are related with the intrinsic properties. Consequently, researchers look for alternative materials with adjusted characteristics for components in solid oxide fuel cells. Currently, the most studied materials as cathode are oxides: La1-X SrX MnO3±δ and La1-X SrX Co1-Y FeY O3-δ. In this work, the nitrates of the respective chemical elements were used as raw materials. The objective of this work is to present the physical, chemical and microstructural characteristics of these materials, prepared by the

  1. Influence of Na-doping in La{sub 0.67}Pb{sub 0.33-x}Na{sub x}MnO{sub 3} (0 ≤ x ≤ 0.15) on its structural, magnetic and magneto-electrical properties

    Energy Technology Data Exchange (ETDEWEB)

    Zaidi, Asma; Cherif, Karima [Laboratoire de la Matière Condensée et des Nanosciences, Université de Monastir, 5019 (Tunisia); Dhahri, J., E-mail: dhahri.jemai@yahoo.fr [Laboratoire de la Matière Condensée et des Nanosciences, Université de Monastir, 5019 (Tunisia); Hlil, E.K. [Institut Neel, CNRS et Université Joseph Fourier, B.P.166, 38042 Grenoble (France); Zaidi, M.; Alharbi, T. [College of Science of Zulfi, Majmaah University (Saudi Arabia)

    2015-11-25

    We have studied the effect of Na substitution on structural, magnetic and electrical properties in La{sub 0.67}Pb{sub 0.33-x}Na{sub x}MnO{sub 3} (0 ≤ x ≤ 0.15). All compositions were synthesized using the sol–gel technique. X-ray diffraction and structure refinement show that they crystallize in the rhombohedra structure with the R − 3c space group. All the samples exhibit a paramagnetic (PM)-ferromagnetic (FM) phase transition (T{sub C}) at 363, 328, 305 and 285 K for x = 0, x = 0.05, x = 0.1 and x = 0.15 respectively. The replacement of Pb ion by Na results in a decrease of the metal-semiconductor transition temperature T{sub M-Sc} and the magnetoresistance (MR) as well as the resistivity are found to increase. The electrical resistivity in the entire temperature range fit well with the phenomenological percolation theory based on the phase segregation mechanism. - Graphical abstract: Temperature dependence of MR under several magnetic applied field values for the samples La{sub 0.67}Pb{sub 0.18-x}Na{sub 0.15}MnO{sub 3}. - Highlights: • The samples exhibit PM-FM phase transition. • The electrical transport is investigated. • Low temperature minimum resistivity is observed. • The electrical resistivity in the entire temperature range fit well with the phenomenological percolation model.

  2. Crystallization behavior of (1 - x)Li2O.xNa2O.Al2O3.4SiO2 glasses

    International Nuclear Information System (INIS)

    Wang, Moo-Chin; Cheng, Chih-Wei; Chang, Kuo-Ming; Hsi, Chi-Shiung

    2010-01-01

    The crystallization behavior of the (1 - x)Li 2 O.xNa 2 O.Al 2 O 3 .4SiO 2 glasses has been investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron diffraction (ED) and energy dispersive spectroscopy (EDS). The crystalline phase was composed of β-spodumene. The isothermal crystallization kinetics of β-spodumene from the (1 - x)Li 2 O.xNa 2 O.Al 2 O 3 .4SiO 2 glasses has also been studied by a quantitative X-ray diffraction method. The activation energy of β-spodumene formation decreases from 359.2 to 317.8 kJ/mol when the Na 2 O content increases from 0 to 0.4 mol and it increases from 317.8 to 376.9 kJ/mol when the Na 2 O content increases from 0.4 to 0.6 mol. The surface nucleation and plate-like growth were dominant in the crystallization of the (1 - x)Li 2 O.xNa 2 O.Al 2 O 3 .4SiO 2 glasses.

  3. Obtenção e caracterização de materiais argilosos quimicamente ativados para utilização em catálise Preparation and characterization of chemically activated clays for use in catalysis

    Directory of Open Access Journals (Sweden)

    M. G. F. Rodrigues

    2006-12-01

    Full Text Available O principal objetivo deste trabalho é caracterizar argilas esmectíticas "Chocolate" de Boa-Vista, PB, tanto na sua forma natural quanto tratada quimicamente, visando sua aplicação em catálise. As argilas foram caracterizadas por fluorescência de raios X, difração de raios X e espectrofotometria de absorção óptica na região do infravermelho. Os resultados mostraram que o tratamento ácido alterou a estrutura da montmorilonita. A reação de isomerização do meta-xileno, para o material ativado, mostrou que a argila ácida foi mais ativa que a natural.The main objective of this paper is to characterize the chocolate smectite clays of Boa-Vista, PB, Brazil, in their natural form, and after chemical treatment, for their application in catalysis. The experimental methods were: X-ray fluorescence, X-ray diffraction and infrared spectroscopy. The results show that the acid treatment altered the montimorillonite structure. The obtained reaction (isomerization of m-xylene for the treated material showed that treated clays were more active than the natural ones.

  4. Efeitos de borda sobre a vegetação e estruturação populacional em fragmentos de Cerradão no Sudoeste Goiano, Brasil Edge effects on vegetation and population structure in Cerradão fragments of Southwest Goiás, Brazil

    Directory of Open Access Journals (Sweden)

    Matheus de Souza Lima-Ribeiro

    2008-06-01

    Full Text Available Efeitos de borda são modificações nos parâmetros físicos, químicos e biológicos observadas na área de contato do fragmento de vegetação com a matriz circundante. O objetivo desse estudo foi testar a hipótese de que os efeitos de borda afetam alguns parâmetros vegetacionais e populacional em fragmentos de Cerradão no município de Caiapônia, Goiás. Para isso, estudou-se a estrutura da vegetação, o padrão de distribuição espacial de Vernonia aurea Mart. ex DC. (Asteraceae e as condições microclimáticas (temperatura do ar e do solo e umidade relativa do ar em dois ambientes, borda e interior, de três fragmentos de Cerradão com diferentes tamanhos (1,5 ha; 9 ha e 35 ha. Os resultados mostraram uma nítida influência dos efeitos de borda em todos os parâmetros analisados, uma vez que a estrutura da vegetação, o nível de agregação dos indivíduos de V. aurea e os parâmetros microclimáticos foram diferentes entre o interior e a borda dos fragmentos analisados. Esses dados corroboram com outros estudos realizados em diferentes ecossistemas, indicando que a fragmentação dos habitats modifica a composição e estrutura da vegetação, a estrutura espacial e a dinâmica das populações vegetais e, conseqüentemente, animais, podendo levar à extinção de populações locais e redução da diversidade biológica.Edge effects are modifications in the physical, chemical and biological parameters observed in areas of contact of forest fragment with the surrounding environment. This paper aimed to test the hypothesis that the edge effects influence some vegetation and population parameters in Cerradão fragments in Caiapônia County, Goiás. To this effect, vegetation structure, Vernonia aurea Mart. ex DC. (Asteraceae spatial distribution and microclimate conditions (air and soil temperature and air humidity were analyzed in two habitats, edge and interior, of three Cerradão fragments with different areas (1.5 ha, 9 ha

  5. Quantitative X-ray spectroscopy of sodium Z-pinch plasmas for Na/ne photopumping

    International Nuclear Information System (INIS)

    Burkhalter, P.G.; Mehlman, G.; Apruzese, J.P.; Newman, D.A.; Scherrer, V.E.; Young, F.C.; Stephanakis, S.J.; Hinshelwood, D.D.

    1990-01-01

    Spectra of sodium K-shell x-ray emission were measured for implosions of sodium-bearing plasmas produced on the Naval Research Laboratory Gamble II pulsed-power generator. Sodium fluoride from a capillary discharge provided the initial plasma for these fast Z-pinch implosions. Spatially-resolved images, corresponding to sodium K-shell x-rays from a 3 to 4 cm long plasma column, were recorded with a curved-crystal spectrograph. Non-uniform emission was observed along this column. The diameter of the plasma along the column (1-5 mm) was determined from time-integrated pinhole-camera images, and the duration of the x-ray emission (15-23 ns FWHM) was measured with a vacuum x-ray diode. Absolute emissivities were determined for X-rays from the n=2-1 and n=3-1 transitions in Na X and Na XI. Emissivities calculated using a collisional-radiative equilibrium model were fitted to these measurements to determine plasma temperatures of 230 to 550 eV and electron densities of 0.2 to 4.0 x 10 20 cm -3 at several locations along the plasma column. The slope of the recombination continuum was also used to determine temperatures of 200 to 300 eV and 200 to 400 eV for Na X and Na XI ions, respectively. Absolute intensity measurements of the n=2-1 line emissions from Na X and Na XI, averaged over the entire plasma length, indicated shot-to-shot variations of more than a factor of two in these implosions. (author)

  6. Explorando las fronteras entre la clínica y el arte: relato de una experiencia junto al Frente de Artistas del Borda

    Directory of Open Access Journals (Sweden)

    Sabrina Ferigato

    2011-01-01

    Full Text Available Este trabajo se constituye como un estudio cualitativo que aborda el uso del arte en la salud mental, y en particular lo que se produce en el espacio fronterizo entre esos dos campos. El debate emerge del relato de la experiencia desarrollada junto al Frente de Artistas del Borda, un movimiento coordinado por artistas y profesionales de la salud, en el Hospital Psicoasistencial José Tiburcio Borda de la Ciudad de Buenos Aires. Con base en los referentes teóricos de la Filosofía de la Diferencia, del Análisis Institucional y de la Clínica Psicosocial, este estudio se construye de acuerdo con los principios de la Reforma Psiquiátrica y con el movimiento de lucha antimanicomial. Los resultados y discusiones que presentamos implican el análisis de los datos obtenidos aplicando la metodología propia del trabajo de campo etnográfico, la observación participante con registro en diarios de campo y la revisión bibliográfica.

  7. Efeitos de alterações na zona ripária sobre a integridade de igarapés amazônicos no Baixo rio Teles Pires, Norte de Mato Grosso

    OpenAIRE

    Bleich, Monica Elisa

    2015-01-01

    Na bacia Amazônica existem muitos riachos, localmente denominados de igarapés, inseridos em paisagens heterogêneas, considerando as variações naturais das condições geomorfológicas, os períodos hidrológicos e a degradação promovida pelo desmatamento, principalmente na borda sul da bacia. Logo, o objetivo do presente estudo foi avaliar os impactos de alterações na cobertura florestal ripária sobre a estrutura do ecossistema em igarapés de cabeceira no baixo rio Teles Pires, norte de Mato Gross...

  8. Abordagem neurologica na sindrome do X fragil

    OpenAIRE

    Marilisa Mantovani Guerreiro

    1993-01-01

    Resumo: Com o propósito de realizar a abordagem neurológica na Síndrome do X Frágil (SXF), estudaram-se 11 pacientes com este diagnóstico citogenético. A idade variou de 8 a 19 anos. Nove pacientes eram do sexo masculino e dois do feminino. Todos os indivíduos apresentaram pavilhões auriculares grandes e faces alongadas. Observou-se fronte proeminente em 63% dos casos e macrorquidia em 33% dentre aqueles do sexo masculino. Atraso na aquisição da fala, fala repetitiva, perseverativa, impulsiva...

  9. Evidência de alterações de permeabilidade vascular na dengue: quando a dosagem de albumina sérica define o quadro? Plasma leakage detection in severe dengue: when serum albumin quantification plays a role?

    Directory of Open Access Journals (Sweden)

    Carlos A.A. Brito

    2007-04-01

    Full Text Available Evidência de extravasamento vascular decorrente do aumento da permeabilidade capilar caracteriza e diferencia febre hemorrágica da dengue. Este artigo avalia o valor de albumina sérica na detecção de alterações de permeabilidade vascular em casos de dengue. Quatorze pacientes diagnosticados com febre hemorrágica da dengue em dois hospitais privados em Recife, Brasil, entre janeiro e maio de 2002 foram seguidos com dosagens diárias de hematócrito e albumina sérica. Ultra-son e Raio X de tórax foram realizados. Oito (57% casos apresentaram hemoconcentração de 20% ou mais. Hipoalbuminemia foi detectado em dez (71% pacientes. Dosagem de albumina sérica aumentou a detecção de alterações de permeabilidade em seis (43% casos na qual a hemoconcentração foi inferior a 20% e os sintomas foram compatíveis com um a resposta imune exacerbada. Raio-X foi normal em todos os casos. A utilização, portanto, de dosagem de albumina sérica aumenta a sensibilidade de detecção de casos de febre hemorrágica da dengue.Evidence of vascular leakage due to increased capillary permeability characterizes and differentiates dengue hemorrhagic fever. This article assesses the value of serum albumin for detecting vascular permeability abnormalities in dengue cases. Fourteen patients diagnosed with dengue hemorrhagic fever at two private hospitals in Recife, Brazil, between January and May 2002 were followed up with daily hematocrit and serum albumin assays. Ultrasound scans and chest X-rays were also performed. Eight (57% of the cases presented hemoconcentration of 20% or more. Hypoalbuminemia was detected in ten patients (71%. Serum albumin assays increased the detection of permeability abnormalities in six cases (43% in which the hemoconcentration was less than 20% and the symptoms were compatible with an exacerbated immune response. The X-rays were normal in all cases. Thus, the use serum albumin quantification increased the sensitivity of dengue

  10. Estudo sobre a eventual utilidade de raios gama na profilaxia da malária transmissível por transfusão de sangue A study on the fortuitons advantage of gamma irradiation in the prophylaxis of transmissible malaria by blood transfusion

    Directory of Open Access Journals (Sweden)

    Lúcia Maria Almeida Braz

    1998-12-01

    Full Text Available O estudo foi realizado com o objetivo de avaliar a eventual utilidade de raios gama na profilaxia da malária transmissível por transfusão de sangue, tendo sido, para isso, usados camundongos infectados pelo Plasmodium berghei. Na primeira fase, quando submetemos sangue deles retirado a 2.500 e 5.000rad, com associação ou não de metronidazol, não obtivemos sucesso, já que todos os animais antes sem a parasitose apresentaram parasitemia e morreram após inoculação do sangue irradiado. Porém, ocorreu êxito parcial na segunda fase, ao serem empregados 10.000 e 15.000rad, porquanto 20% e 40% dos roedores, respectivamente, embora tenham ficado infectados, sobreviveram, com posterior negativação quanto à presença do P. berghei.This study was carried out to evaluate the fortuitons advantage of using gamma irradiation in the prophylaxis of transmissible malaria by blood transfusion, with mice as the experimental model. In the first step, when the infected blood with Plasmodium berghei was submitted to 2,500rad and 5,000rad, with or without metronidazol, there was no success, because the animals presented parasitaemia and died after inoculation of irradiated blood. However, there was partial success in the second step, when the infected blood received 10,000 and 15,000rad, and was inoculated in mice, which showed infection, and presented a survival rate of 20% and 40%, respectively, with later negativation of blood infected by P. berghei.

  11. Estudo da densidade óssea na esclerodermia sistêmica

    Directory of Open Access Journals (Sweden)

    da Silva H.C.

    1997-01-01

    Full Text Available OBJETIVO. A osteopenia em pacientes com esclerodermia sistêmica foi descrita, radiologicamente, em mãos e, por densidade óssea, no terço proximal e distal do rádio. A redução da massa óssea, nesses pacientes, tem sido atribuída à isquemia, imobilização e à menopausa precoce. O objetivo deste estudo é analisar a densidade óssea na coluna, região proximal do fêmur e corpo todo de pacientes com esclerodermia sistêmica. PACIENTES E MÉTODO. Foram examinadas 25 pacientes caucasóides, sem outras condições que pudessem afetar o metabolismo ósseo. A média de idade das pacientes foi de 48 ± 12 anos, e o tempo de doença, de 7 ± 7 anos; 13 estavam na pós-menopausa há 8 ± 8 anos. A medida de massa óssea foi realizada na coluna, região proximal do fêmur e corpo todo, utilizando-se densitômetro de dupla emissão com fonte de raios X (Lunar - modelo DPX. RESULTADOS. Não houve diferença estatisticamente significante na densidade óssea das regiões avaliadas nas pacientes com esclerodermia sistêmica e as mulheres-controle pareadas para a idade, peso, altura e anos de menopausa. A densidade óssea das pacientes com forma limitada não foi diferente daquelas com a forma difusa. Pacientes com calcinose apresentaram menor densidade óssea na região proximal do fêmur que aquelas sem calcinose. CONCLUSÕES. Os autores concluíram que pacientes com esclerodermia sistêmica não apresentam perda de massa óssea. Portanto, a esclerodermia não é um fator de risco para o desenvolvimento de osteoporose generalizada.

  12. Microstructural characterization of porous materials by X-ray microtomography and gamma ray transmission techniques; Caracterizacao da microestrutura de materiais porosos por microtomografia de raios X e transmissao de raios gama

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Anderson Camargo

    2006-07-01

    This work presents the application of the X-ray microtomography and gamma ray transmission techniques for the microstructure characterization of different kinds of materials. Total porosity, pore size distribution and the two point correlation functions were measured. The two point correlation function, which allows the reconstruction of 3D models, was carried out for two samples. Seven ceramic tablets of Alumina (Al{sub 2}O{sub 3}), seven tablets of Boron Carbide (B{sub 4}C), three samples of sedimentary rocks and one sample of Titanium foam were analyzed. The experimental set up for the Gamma Ray Transmission technique consisted of: a 2'' x 2'' crystal NaI(Tl) detector, an {sup 241} Am radioactive source (59,53 keV, 100 mCi), an automatic micrometric table for the sample XZ movement and standard gamma spectrometry electronics. Two microtomography systems were used: a Fein Focus system, constituted by an X-ray tube, operated at 160 kV and 0.3 to 1.1 mA, a CCD camera and the movement sample system, and a Skyscan system, model 1072, with a X-ray tube operated at 100 kV and 100{mu}A, and a CCD camera. The ceramic tablets, analyzed by the gamma ray transmission technique presented results for most of the porosities data with smaller confidence intervals and inside the intervals supplied by the tablets manufacturer. The Titanium porous sample was analyzed by the two techniques, its microtomography images achieved a resolution of 17{mu}m, obtained employing the Fein Focus system. For both techniques, this sample showed high porosity, which allows its application for this purpose. The sandstones samples were analyzed by the Skyscan system, achieving resolutions of 19{mu}m, 11{mu}m and 3.8{mu}m for each sample, respectively. The resolutions of 11{mu}m and 3.8{mu}m were the ones that generated better 2D sections for the respective samples and, consequently, more reliable porosities. The 3.8{mu}m resolution was the one that best quantified the pore size

  13. UTILIZAÇÃO DE RESÍDUOS DE ROCHAS ORNAMENTAIS NA PRODUÇÃO DE CERÂMICA BRANCA

    Directory of Open Access Journals (Sweden)

    Antônio de Pádua Arlindo Dantas

    2010-04-01

    Full Text Available Os rejeitos de granito são provenientes do processo de mineração dessas rochas ornamentais para uso na indústria da construção civil. O Brasil é um dos maiores produtores de blocos ou produtos acabados de rochas ornamentais, extraindo cerca de 5,2 milhões toneladas/ano. Os maiores produtores nacionais são os estados do Espírito Santo, Minas Gerais e Bahia que respondem por 80% da produção nacional. Porém o desperdício em todo o processo de desmonte destes blocos chega a incríveis 40% do total. O uso dos detritos produzidos por esta indústria na cerâmica branca poderia ser uma forma de disposição desse material, visto que estes materiais, sob forma de lama, são lançados diretamente em lagoas de decantação, terrenos baldios ou jogados em rios, sem nenhum tratamento. O presente trabalho tem como propósito principal estudar a influência que o rejeito das rochas ornamentais exerce sobre as propriedades físicas e mecânicas da cerâmica branca. Para isso, foram feitas as caracterizações das matérias-primas por fluorescência de Raios-X, difração de Raios-X, análise granulométrica, análise termogravimétrica e análise termodiferencial, elaborando-se cinco formulações (0, 10, 20, 30, 40% em peso de granito que foram queimadas em três temperaturas: 1100°C, 1150°C e 1200ºC com 60 minutos de patamar. Após a queima, os corpos-de-prova foram submetidos a ensaios de absorção de água, retração linear, porosidade aparente, massa específica aparente, resistência à flexão, microscopia eletrônica de varredura. Foram obtidas propriedades tecnológicas compatíveis com os limites mínimos exigidos para a fabricação de um grês porcelanato. Palavras-chave: Rochas ornamentais. Argila caulinítica. Grês porcelanato.

  14. Ferroelectric and dielectric properties of Sr2-x(Na, K)xBi4Ti5O18 lead-free piezoelectric ceramics

    International Nuclear Information System (INIS)

    Chen Qian; Xu Zhijun; Chu Ruiqing; Hao Jigong; Zhang Yanjie; Li Guorong; Yin Qingrui

    2010-01-01

    (Na, K)-doped Sr 2 Bi 4 Ti 5 O 18 (SBTi) bismuth layer structure ferroelectric ceramics were prepared by the solid-state reaction method. Pure bismuth-layered structural Sr 2-x (Na, K) x Bi 4 Ti 5 O 18 (x=0.1, 0.2, 0.3, and 0.4) ceramics with uniform grain size were obtained in this work. The effects of (Na, K)-doping on the dielectric, ferroelectric and piezoelectric properties of SBTi ceramics were investigated. Results showed that (Na, K)-doping caused the Curie temperature of SBTi ceramics to shift to higher temperature and enhanced the ferroelectric and piezoelectric properties. At x=0.2, the ceramics exhibited optimum properties with d 33 =20 pC/N, P r =10.3 μC/cm 2 , and T c =324 o C.

  15. Calendário floral de plantas melíferas nativas da Borda Oeste do Pantanal no Estado do Mato Grosso do Sul

    Directory of Open Access Journals (Sweden)

    Suzana Maria Salis

    2015-10-01

    Full Text Available Resumo:O objetivo deste trabalho foi avaliar o padrão de floração, ao longo do ano, de plantas melíferas na Borda Oeste do Pantanal, no Maciço do Urucum, MS, bem como o tipo de recurso oferecido pela flora melífera, para elaborar um calendário floral para a região. A floração das plantas melíferas visitadas pelas abelhas nativas e africanizadas foi acompanhada quinzenalmente, por 3 anos consecutivos, tendo-se anotado a data de florescimento, o hábito de crescimento e os recursos coletados pelos insetos. Foram identificadas 160 espécies florescendo e sendo visitadas pelas abelhas, mas somente 73 espécies foram consideradas como plantas melíferas e incluídas no calendário floral, das quais 34 eram ervas, 17 árvores, 15 arbustos e 7 lianas. Foram observadas plantas melíferas em flor ao longo de todo o ano, com maior número no verão e menor no inverno. As ervas florescem mais intensamente no verão e no outono (janeiro-junho, enquanto as árvores e os arbustos, na primavera (final de setembro-dezembro. As lianas florescem, principalmente, no final do verão (março-abril. Néctar e pólen são oferecidos às abelhas ao longo de todo o ano, com diminuição da oferta nos meses de inverno (julho-setembro.

  16. Chemistry of alkali cation exchanged faujasite and mesoporous NaX using alkyl halides and phosphates

    Science.gov (United States)

    Lee, Min-Hong

    The purpose of this work was to increase the reactivity of Faujasite X (NaX) zeolite toward the reactive decontamination of materials subject to nucleophilic attack by means of zeolite cation optimization and by means of the synthesis of mesoporous Faujasite X. Primary alkyl halides and trialkyl phosphates have been the test materials on which the cation-optimized and mesoporous zeolites have been tested. In the alkali cation optimization work, reactions of methyl iodide and 1-chloropropane with alkali metal cation exchanged Faujasite zeolite X were investigated at room temperature. The reactivity of the framework and the product formation were shown to depend on zeolite framework counter-cation. A quantitative study of zeolite product formation has been carried out, primarily using solid-state NMR spectroscopy. Large alkali cations showed preference toward substitution chemistry. In contrast, alkyl halide exposed LiX and NaX zeolites underwent both substitution and elimination. Subsequently introduced water molecules led to hydrolysis of framework species that was sensitive to framework counter-cation. The mesoporous NaX zeolites work undertakes to test whether an improvement in surface chemical reactivity can be achieved by introducing mesopores into the already reactive nucleophilic microporous NaX zeolite. Incorporation of the polydiallyl dimethyl ammonium chloride (PDADMAC) template and the formation of mesopores in Faujasite X zeolite (NaX) were successful and well-characterized. The mesopores are proposed to have occurred from incorporation of the cationic PDADMAC polymer into the zeolite by compensating zeolite framework charge. Subsequent sodium cation exchange of calcined mesoporous NaX was shown to restore the chemical reactivity characteristic of as-synthesized NaX. Trialkyl organophosphorous compounds underwent substitution reactions. The reactivity of both microporous and mesoporous Faujasite zeolite X and the product formation was shown to depend on

  17. Separation of molecular hydrogen isotope mixtures using zeolite NaX-3M

    International Nuclear Information System (INIS)

    Polevoj, A.S.; Yudin, I.P.

    1984-01-01

    The components of transfer unit height (TUH) at separation of the H 2 -D 2 mixture using zeolite NaX-3M in the countercurrent column are determined. It is shown that the interphase isotopic exchange in the column is limited by gaseous diffusion in sorbent primary pores. On the basis of the TUH dependence the value of the hydrogen diffusion coefficient in primary pores of NaX-3M zeolite equal at 77 K and 87.3 K, respectively, approximately 1.09x10 -15 and approximately 1.69x10 -15 m 2 /s is calculated

  18. Synthesis of Li(x)Na(2-x)Mn2S3 and LiNaMnS2 through redox-induced ion exchange reactions

    International Nuclear Information System (INIS)

    Luthy, Joshua A.; Goodman, Phillip L.; Martin, Benjamin R.

    2009-01-01

    Na 2 Mn 2 S 3 was oxidatively deintercalated using iodine in acetonitrile to yield Na 1.3 Mn 2 S 3 , with lattice constants nearly identical to that of the reactant. Lithium was then reductively intercalated into the oxidized product to yield Li 0.7 Na 1.3 Mn 2 S 3 . When heated, this metastable compound decomposed to form a new crystalline compound, LiNaMnS 2 , along with MnS and residual Na 2 Mn 2 S 3 . Single crystal X-ray diffraction structural analysis of LiNaMnS 2 revealed that this compound crystallizes in P-3m1 with cell parameters a=4.0479(6) A, c=6.7759(14) A, V=96.15(3) A 3 (Z=1, wR2=0.0367) in the NaLiCdS 2 structure-type. - Graphical abstract: Structure of LiNaMnS 2 . Li and Mn are statistically distributed in edge-shared tetrahedral environments linked into infinite planes. Sodium ions occupy interlayer sites

  19. Evaluation of NaX and NaY packed beds for chromium uptake from multicomponent solution

    Directory of Open Access Journals (Sweden)

    Maria Angélica Simões Dornellas de Barros

    2014-04-01

    Full Text Available In this paper the removal of chromium from Cr/Ca/Mg/K and Cr/Ca/Mg/K/Na solutions was investigated in NaX and NaY packed beds. The breakthrough curves presented some overshooting phenomena where chromium ions displaced the previous exchanged cations. Length of unused bed, overall mass transfer coefficient, operational ratio and dimensionless variance were obtained. According to such mass transfer parameters it was concluded that the chromium uptake is influenced by the competition and interaction of the entering ions. Such influences were verified through some differences in the dynamic selectivity obtained for each system. NaY seemed to have a higher affinity towards Cr3+ and its sites were more efficiently used in the ion exchange process.

  20. Epitaxial growth and control of the sodium content in Na{sub x}CoO{sub 2} thin films

    Energy Technology Data Exchange (ETDEWEB)

    Hildebrandt, Sandra; Komissinskiy, Philipp [Institute for Materials Science, Technische Universität Darmstadt, 64287 Darmstadt (Germany); Major, Marton [Institute for Materials Science, Technische Universität Darmstadt, 64287 Darmstadt (Germany); WIGNER RCP, RMKI, H-1525 Budapest, P.O.B. 49 (Hungary); Donner, Wolfgang [Institute for Materials Science, Technische Universität Darmstadt, 64287 Darmstadt (Germany); Alff, Lambert, E-mail: alff@oxide.tu-darmstadt.de [Institute for Materials Science, Technische Universität Darmstadt, 64287 Darmstadt (Germany)

    2013-10-31

    Single-phase c-axis oriented Na{sub x}CoO{sub 2} thin films were grown on (001) SrTiO{sub 3} single-crystal substrates, using pulsed laser deposition. X-ray diffraction analysis indicates the epitaxial growth of Na{sub x}CoO{sub 2} thin films in two domains, rotated in-plane by 15 and 45 degrees relative to [100] SrTiO{sub 3}. The sodium stoichiometry x of the films can be controlled in a range of 0.38 < x < 0.84 by in-situ post-deposition annealing the Na{sub x}CoO{sub 2} films at 720 – 760 °C in oxygen for 10 – 30 min. γ - Na{sub x}CoO{sub 2} films are obtained with a full width at half maximum of the (002) Na{sub x}CoO{sub 2} rocking curve below 0.2 degrees. The post-deposition annealing can substitute commonly used chemical deintercalation of Na which is typically associated with a loss in crystallinity. - Highlights: • Single phase Na{sub x}CoO{sub 2} thin films grown by pulsed laser deposition • Epitaxial relations of Na{sub x}CoO{sub 2} thin films on (001) SrTiO{sub 3} substrates • Multi-domain thin films • Control of sodium content by in-situ annealing of Na{sub x}CoO{sub 2} thin films.

  1. The effect of X-irradiation on Na-K ATPase and cation distribution in rabbit lens

    International Nuclear Information System (INIS)

    Matsuda, H.; Giblin, F.J.; Reddy, V.N.

    1982-01-01

    The Na-K ATPase activity of rabbit lens was measured at various times after exposure to a single dose of 2000 rads of X-ray and was compared with that in contralateral control eyes. A decrease in enzyme activity in both whole lens and in isolated capsule-epithelium was first observed 3 to 4 weeks after irradiation and became increasingly marked at 7.5 weeks after X-ray. These findings are consistent with our earlier observations that active transport of cations is reduced in these lenses and support the view that loss of membrane ATPase is responsible for the impairment of the cation pump in X-irradiated lenses. Despite a significant loss of the enzyme, X-irradiated lenses were able to maintain near normal levels of total cations (Na+ + K+), thus accounting for their normal hydration. The results of the changes in lens Na+ and K+ levels revealed that between 4 and 7.5 weeks after X-ray, the gain in Na+ was compensated by an equivalent loss of K+. A breakdown of this relationship of 1:1 exchange of Na+ for K+ is accompanied by a disproportionate increase in Na+ and water

  2. Synthesis and piezoelectric properties of KxNa1-xNbO3 ceramic by molten salt method

    International Nuclear Information System (INIS)

    Li Yueming; Wang Jinsong; Liao Runhua; Huang Dan; Jiang Xiangping

    2010-01-01

    K x Na 1-x NbO 3 ceramic powder with perovskite structure was synthesized in molten salt with a Na 2 CO 3 /K 2 CO 3 molar ratio of 1:1, under different salt-to-oxide weight ratios of 1:10, 1:5, 1:3, 1:2.5 and 1:2 in the temperatures range of 650-900 o C. It is found that the synthesizing temperature and salt-to-oxide ratios had significant effects on the morphology of K x Na 1-x NbO 3 powder. The X-ray diffraction analysis indicated that a pure perovskite structure of K x Na 1-x NbO 3 powder could be synthesized at 650 o C. The microstructure observation revealed that the crystal morphology of K x Na 1-x NbO 3 powder changed from spheroid to cube, and then became irregular after further increasing temperature. The grain size of the synthesized powder increased by an increment of the molten salt content. The K x Na 1-x NbO 3 ceramics were prepared at x = 0.345 by adding 1.0 mol% ZnO as sintering aid, and the optimized dielectric and piezoelectric properties are obtained as following: d 33 = 120 pC/N, T c = 406 o C, Q m = 126 and k p = 0.302.

  3. Crystal structure and transport properties of gamma-Na sub x CoO sub 2 (x=0.67 approx 0.75)

    CERN Document Server

    Ono, Y; Miyazaki, Y; Kajitani, T; Ishii, Y

    2003-01-01

    Crystal structure and transport properties of gamma-Na sub x CoO sub 2 have been studied in the range of x=0.67-0.75. Single-phase samples were prepared by sintering mixture of raw materials, Na sub 2 CO sub 3 (99.5%) and Co sub 3 O sub 4 (99.9%). Na/Co composition ratio (x) was determined by inductively coupled plasma (ICP) analysis. The crystal structure parameters were refined by Rietveld analysis of powder neutron diffraction intensities, assuming P6 sub 3 /mmc type space symmetry. Little changes in the crystal structure are noticed, except for Na contents. Electric resistivity rho and Seebeck coefficient S were measured at temperatures between 380 K and 1000 K by the standard four-probe method and temperature gradient method, respectively. The rho-T curves exhibit the thermal hysteresis in the initial measurement. But, in the following measurement, the thermal hysteresis is significantly suppressed. The S was slightly higher in the sample with x = 0.75 than in the others at any temperatures. Power factor...

  4. Uso do programa cristalográfico Mercury® para o ensino de Química Mineral e Mineralogia

    Directory of Open Access Journals (Sweden)

    Carlos Jorge da Cunha

    2015-06-01

    Full Text Available O programa cristalográfico Mercury®, distribuído gratuitamente na internetpelo Cambridge Crystallographic Data Centre (CCDC permite a visualização tridimensional de estruturas de minerais a partir de arquivos CIF (Crystallographic Information File e permite também: medição de distâncias e ângulos de ligação e ângulos de torção; seleção ou exclusão de átomos; geração do difratograma de raios X de pó e a visualização de planos hkl do cristal; da cela unitária e de porções selecionadas do cristal. Ele tem sido usado como recurso didático, há três anos, na disciplina CQ-029, ofertada pelo Departamento de Química aos alunos do Curso de Geologia da UFPR (Universidade Federal do Paraná. Os efeitos desta metodologia têm sido significativos na compreensão, por parte dos alunos, das diferentes estruturas de silicatos, dos diferentes tipos de coordenação de íons, da origem (e atribuição dos picos em difratogramas de raios X e na compreensão dos vários tipos de substituição sólida.

  5. Effect of NaX zeolite-modified graphite felts on hexavalent chromium removal in biocathode microbial fuel cells.

    Science.gov (United States)

    Wu, Xiayuan; Tong, Fei; Yong, Xiaoyu; Zhou, Jun; Zhang, Lixiong; Jia, Honghua; Wei, Ping

    2016-05-05

    Two kinds of NaX zeolite-modified graphite felts were used as biocathode electrodes in hexavalent chromium (Cr(VI))-reducing microbial fuel cells (MFCs). The one was fabricated through direct modification, and the other one processed by HNO3 pretreatment of graphite felt before modification. The results showed that two NaX zeolite-modified graphite felts are excellent bio-electrode materials for MFCs, and that a large NaX loading mass, obtained by HNO3 pretreatment (the HNO3-NaX electrode), leads to a superior performance. The HNO3-NaX electrode significantly improved the electricity generation and Cr(VI) removal of the MFC. The maximum Cr(VI) removal rate increased to 10.39±0.28 mg/L h, which was 8.2 times higher than that of the unmodified control. The improvement was ascribed to the strong affinity that NaX zeolite particles, present in large number on the graphite felt, have for microorganisms and Cr(VI) ions. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. Adsorption of Na on Ge(001)(2x1) surface

    International Nuclear Information System (INIS)

    Xiao, H.Y.; Zu, X.T.

    2006-01-01

    The adsorption of sodium on the Ge(001)(2x1) surface at the coverage (Θ) of 0.5 and 1ML has been investigated by using ab initio total energy calculations. It was found that at Θ=0.5ML T3 and T4 sites are nearly degenerate and Na adatoms preferred to adsorb at T3 and T4 sites. This finding agrees well with Meyerheim et al.'s experimental results, but does not support theoretical investigations of Spiess et al., who found HH site was the most stable. For 1ML coverage the most stable configurations are a combination of the HH and T3 or T4 sites. Work function and dipole moment analysis showed that upon Na adsorption on Ge(001)(2x1) and Si(001)(2x1) surface the dipole-dipole repulsion is small and no depolarization effect occurs as the coverage increases from 0.5 to 1ML

  7. Avaliação do kerma no ar na superfície de entrada e da qualidade da imagem em radiografias de tórax Evaluation of entrance surface air kerma rate and clinical images quality in chest radiography

    Directory of Open Access Journals (Sweden)

    Angelo Bernardo Brasil de Souza

    2009-10-01

    Full Text Available OBJETIVO: Avaliar os fatores de técnica utilizados durante exames de tórax póstero-anterior em pacientes-padrão e correlacioná-los aos valores de kerma no ar na superfície de entrada e à qualidade das imagens clínicas. MATERIAIS E MÉTODOS: O estudo foi realizado em três hospitais do Rio de Janeiro, num total de cinco salas de raios X, com dez pacientes por sala. As imagens foram avaliadas pelos radiologistas dos serviços segundo o protocolo europeu. O kerma no ar na superfície de entrada foi estimado a partir da curva de rendimento do equipamento de raios X, que foi obtida utilizando câmara de ionização acoplada a um eletrômetro. Análise de variância foi realizada para verificar se a diferença entre os valores de kerma no ar na superfície de entrada é significativa. RESULTADOS: Os valores de kerma no ar na superfície de entrada variaram entre 0,05 e 0,26 mGy, com média 60% inferior ao nível de referência publicado na Portaria 453. Das imagens avaliadas, 98% atenderam acima de 65% dos critérios de qualidade. CONCLUSÃO: Para um padrão de qualidade da imagem, aceitável para o diagnóstico, verificou-se ampla variação do kerma no ar na superfície de entrada para pacientes-padrão. Isto demonstra a falta de padronização dos fatores de técnica e a existência de um potencial de redução do valor do kerma no ar na superfície de entrada.OBJECTIVE: To evaluate technical factors involved in posteroanterior chest radiography in standard patients, and correlating them with entrance surface air kerma rate and with the clinical images quality. MATERIALS AND METHODS: The present study was developed at three hospitals in Rio de Janeiro, Brazil, involving a total of five x-ray rooms, with ten patients per room. The images were evaluated by the radiologists of the institutions, in accordance with the European protocol. The estimation of surface entrance air kerma rate was based on the x-ray equipment output curve obtained with

  8. Isotretinoína: perfis farmacológico, farmacocinético e analítico Isotretinoin: pharmacological, pharmacokinetic and analytical profiles

    Directory of Open Access Journals (Sweden)

    Danielle Guimarães Almeida Diniz

    2002-12-01

    Full Text Available A isotretinoína, quimicamente conhecida como ácido-13-cis-retinóico, faz parte do amplo grupo de compostos relacionados à vitamina A. É empregada particularmente no tratamento da acne cística e nodular e como inibidor da proliferação de células neoplásicas, por exercer efeito regulador sobre a diferenciação celular. Os efeitos adversos envolvendo o uso de isotretinoína estão relacionados à pele e membranas mucosas, sistemas nervoso, músculo esquelético, linfático, gastrintestinal, cardiorespiratório e geniturinário. A isotretinoína é um composto termo e fotossensível e, por assim se apresentar, desperta o interesse pelo estudo de sua estabilidade, empregando-se para isso várias metodologias analíticas como a CLAE, CG, análise térmica, espectroscopia de massa, microcalorimetria, difratometria de raios-X e muitas outras que devem ser selecionadas de acordo com o interesse do pesquisador.Isotretinoin, or 13-cis-retinoic acid, is one of the vitamin A related compounds. Isotretinoin is used for the treatment of severe cystic acne and also shows inhibitory activity over the proliferation of neoplasic cells, due to its efficiency in regulating cell diferentiation. Side effects are related to skin and mucous membranes, central nervous system, muscles, lymphatic, gastrintestinal, pulmonary and genitourinary systems. Isotretinoin is a highly thermal and photolabile compound. Stability studies require several analytical methods such as HPLC, GC, thermal analysis, mass spectrometry, microcalorimetry and X-Ray difratometry.

  9. Crystallization behavior of (1 - x)Li{sub 2}O.xNa{sub 2}O.Al{sub 2}O{sub 3}.4SiO{sub 2} glasses

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Moo-Chin [Department of Fragrance and Cosmetic Science, Kaohsiung Medical University, 100 Shih-Chuan 1st Road, Kaohsiung 807, Taiwan (China); Cheng, Chih-Wei; Chang, Kuo-Ming [Department of Mechanical Engineering, National Kaohsiung University of Applied Sciences, 415 Chien-Kung Road, Kaohsiung 80782, Taiwan (China); Hsi, Chi-Shiung, E-mail: chsi@nuu.edu.t [Department of Materials Science and Engineering, National United University, 1 Lien-Da, Kung-Ching Li, Miao-Li 36003, Taiwan (China)

    2010-07-02

    The crystallization behavior of the (1 - x)Li{sub 2}O.xNa{sub 2}O.Al{sub 2}O{sub 3}.4SiO{sub 2} glasses has been investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron diffraction (ED) and energy dispersive spectroscopy (EDS). The crystalline phase was composed of {beta}-spodumene. The isothermal crystallization kinetics of {beta}-spodumene from the (1 - x)Li{sub 2}O.xNa{sub 2}O.Al{sub 2}O{sub 3}.4SiO{sub 2} glasses has also been studied by a quantitative X-ray diffraction method. The activation energy of {beta}-spodumene formation decreases from 359.2 to 317.8 kJ/mol when the Na{sub 2}O content increases from 0 to 0.4 mol and it increases from 317.8 to 376.9 kJ/mol when the Na{sub 2}O content increases from 0.4 to 0.6 mol. The surface nucleation and plate-like growth were dominant in the crystallization of the (1 - x)Li{sub 2}O.xNa{sub 2}O.Al{sub 2}O{sub 3}.4SiO{sub 2} glasses.

  10. Adsorption/desorption kinetics of Na atoms on reconstructed Si (111)-7 x 7 surface

    International Nuclear Information System (INIS)

    Chauhan, Amit Kumar Singh; Govind; Shivaprasad, S.M.

    2010-01-01

    Self-assembled nanostructures on a periodic template are fundamentally and technologically important as they put forward the possibility to fabricate and pattern micro/nano-electronics for sensors, ultra high-density memories and nanocatalysts. Alkali-metal (AM) nanostructure grown on a semiconductor surface has received considerable attention because of their simple hydrogen like electronic structure. However, little efforts have been made to understand the fundamental aspects of the growth mechanism of self-assembled nanostructures of AM on semiconductor surfaces. In this paper, we report organized investigation of kinetically controlled room-temperature (RT) adsorption/desorption of sodium (Na) metal atoms on clean reconstructed Si (111)-7 x 7 surface, by X-ray photoelectron spectroscopy (XPS). The RT uptake curve shows a layer-by-layer growth (Frank-vander Merve growth) mode of Na on Si (111)-7 x 7 surfaces and a shift is observed in the binding energy position of Na (1s) spectra. The thermal stability of the Na/Si (111) system was inspected by annealing the system to higher substrate temperatures. Within a temperature range from RT to 350 o C, the temperature induced mobility to the excess Na atoms sitting on top of the bilayer, allowing to arrange themselves. Na atoms desorbed over a wide temperature range of 370 o C, before depleting the Si (111) surface at temperature 720 o C. The acquired valence-band (VB) spectra during Na growth revealed the development of new electronic-states near the Fermi level and desorption leads the termination of these. For Na adsorption up to 2 monolayers, decrease in work function (-1.35 eV) was observed, whereas work function of the system monotonically increases with Na desorption from the Si surface as observed by other studies also. This kinetic and thermodynamic study of Na adsorbed Si (111)-7 x 7 system can be utilized in fabrication of sensors used in night vision devices.

  11. Development of NaI(Tl) scintillating films for imaging soft x-rays

    International Nuclear Information System (INIS)

    Shepherd, J.A.

    1993-01-01

    Thin film NaI(Tl) scintillators, of areas of up to 130 cm 2 , have been fabricated and characterized for use on soft x-ray imaging photomultiplier tubes. Relevant parameters of photon-counting imaging detectors are defined and used to predict the performance of several materials, including CsI(Na), CsI(Tl), CaF 2 (Eu), Lu 2 (SiO 4 )O:Ce, and NaI(Tl), as thin film scintillators on fiber optic substrates. Also, x-ray imaging methodologies are compared. The NaI(Tl) films were vapor-deposited onto quartz and fiber optic substrates using a powder flash deposition technique. When compared to single crystal NaI(Tl), the films were found to have equally high light yield but lower energy resolution. Light yield optimization was studied in detail including the effects of substrate temperature, activator concentration in the evaporant, and boat temperature. Spatial resolution as well as parallax errors are discussed and measured for film thicknesses up to 61 μm. A technique is described that can substantially increase the light collection of high index films on fiber optic disks. The light collection was improved by 20% by coating the disk with potassium silicate before the NaI(Tl) deposition. Large area films, up to 130 cm 2 , had a spatial uniformity of response within ±1.5% for count rate and ±3.5% for light yield, and their spatial resolution exceeded 16.6 lp mm -1 when deposited onto fiber optic substrates. The 8-keV x-ray detection efficiency of the microchannel plate imaging photomultiplier tube coupled to a NaI(Tl) film scintillator is predicted to be 88%. Other uses for the films are also described

  12. Understanding the conductive channel evolution in Na:WO3-x-based planar devices

    Science.gov (United States)

    Shang, Dashan; Li, Peining; Wang, Tao; Carria, Egidio; Sun, Jirong; Shen, Baogen; Taubner, Thomas; Valov, Ilia; Waser, Rainer; Wuttig, Matthias

    2015-03-01

    An ion migration process in a solid electrolyte is important for ion-based functional devices, such as fuel cells, batteries, electrochromics, gas sensors, and resistive switching systems. In this study, a planar sandwich structure is prepared by depositing tungsten oxide (WO3-x) films on a soda-lime glass substrate, from which Na+ diffuses into the WO3-x films during the deposition. The entire process of Na+ migration driven by an alternating electric field is visualized in the Na-doped WO3-x films in the form of conductive channel by in situ optical imaging combined with infrared spectroscopy and near-field imaging techniques. A reversible change of geometry between a parabolic and a bar channel is observed with the resistance change of the devices. The peculiar channel evolution is interpreted by a thermal-stress-induced mechanical deformation of the films and an asymmetric Na+ mobility between the parabolic and the bar channels. These results exemplify a typical ion migration process driven by an alternating electric field in a solid electrolyte with a low ion mobility and are expected to be beneficial to improve the controllability of the ion migration in ion-based functional devices, such as resistive switching devices.An ion migration process in a solid electrolyte is important for ion-based functional devices, such as fuel cells, batteries, electrochromics, gas sensors, and resistive switching systems. In this study, a planar sandwich structure is prepared by depositing tungsten oxide (WO3-x) films on a soda-lime glass substrate, from which Na+ diffuses into the WO3-x films during the deposition. The entire process of Na+ migration driven by an alternating electric field is visualized in the Na-doped WO3-x films in the form of conductive channel by in situ optical imaging combined with infrared spectroscopy and near-field imaging techniques. A reversible change of geometry between a parabolic and a bar channel is observed with the resistance change of the

  13. A fonte ionizante do disco de acreção no núcleo de NGC1097

    Science.gov (United States)

    Silva, R. N.; Storchi-Bergmann, T.

    2003-08-01

    Observações em raios-X revelam o "coração" dos núcleos ativos de galáxias, pois esse tipo de radiação provém das suas regiões mais internas, próximas ao buraco negro central. Neste trabalho apresentamos observações em raios-X da região central da galáxia NGC1097, que hospeda um buraco negro supermassivo e um disco de acreção cuja emissão vem sendo observada há dez anos através da linha de emissão Ha larga (10000 km/s) e de duplo pico. As observações em raios-X - que foram obtidas com o Telescópio Chandra - foram combinadas com observações no ultravioleta obtidas com o Telescópio Espacial Hubble e são usadas para estudar as características da fonte central que ioniza o disco de acreção. A distribuição espectral de energia é comparada com a predita por modelos, em particular o de uma estrutura "ADAF" ("advection dominated accretion flow") na parte interna do disco. Tal estrutura produz um espectro de emissão de linhas estreitas tipo LINER, como observado em NGC1097 e em rádio-galáxias que apresentam linhas de Balmer largas de duplo pico. Apresentamos também uma comparação entre outros LINERs com linhas de emissão largas de duplo pico, disponíveis na literatura ou nos arquivos do Chandra e do Telescópio Espacial Hubble e discutimos as correspondentes implicações para modelos da fonte central.

  14. The importance of using diffraction of X ray in clays characterization; A importancia da utilizacao da difracao de raios X na caracterizacao de argilas

    Energy Technology Data Exchange (ETDEWEB)

    Piccoli, R.; Nascimento, G.C.; Vitoretti, P.P.; Wernck, A.S.W., E-mail: rosaura@sc.senai.b [SENAI, Criciuma, SC (Brazil). Centro de Tecnologia em Ceramica; Perdona, C.R. [Universidade Barriga Verde, Cocal do Sul, SC (Brazil). Curso de Engenharia Ceramica; Perucchi, P. [Universidade do Extremo Sul Catarinense, Criciuma, SC (Brazil). Curso de Ciencia e Engenharia de Materiais

    2009-07-01

    The objective of this work is to demonstrate how the identification of crystalline phases and deg of crystallinity by diffractometry technique of X-ray (XRD) combined with chemical analysis of a sample can help in the study and characterization of raw materials, mainly those used in ceramic compositions. This study also aims to address the inherent limitations of this technique in relation to types of crystalline phases present in the sample of interest for analysis. (author)

  15. The phase transformation and crystallization kinetics of (1 - x)Li2O-xNa2O-Al2O3-4SiO2 glasses

    International Nuclear Information System (INIS)

    Wang, Moo-Chin; Li, Wang-Long; Cheng, Chih-Wei; Chang, Kuo-Ming; Chen, Yong-Feng; Hsi, Chi-Shiung

    2010-01-01

    The phase transformation and crystallization kinetics of (1 - x)Li 2 O-xNa 2 O-Al 2 O 3 -4SiO 2 glasses have been studied by using differential thermal analysis (DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electron diffraction (ED) analysis. The crystallization temperature at the exothermic peak increases from 1171 to 1212 K when the Na 2 O content increases from 0 to 0.6 mol. The crystalline phase is composed of spodumene crystallization when the Na 2 O content increases from 0 to 0.6 mol. The activation energy of spodumene crystallization decreases from 444.0 ± 22.2 to 284.0 ± 10.8 kJ mol -1 when the Na 2 O content increases from 0 to 0.4 mol. Moreover, the activation energy increases from 284.0 ± 10.8 to 446.0 ± 23.2 kJ mol -1 when the Na 2 O content increases from 0.4 to 0.6 mol. The crystallization parameters m and n approach 2, indicating that the surface nucleation and two-dimensional growth are dominant in (1 - x)Li 2 O-xNa 2 O-Al 2 O 3 -4SiO 2 glasses.

  16. Raios-x: fascinação, medo e ciência X-rays: fascination, fear and science

    Directory of Open Access Journals (Sweden)

    Rodrigo da Silva Lima

    2009-01-01

    Full Text Available This work presents the discovery and the use of x-rays at the end of the XIXth and the beginning of the XXth century. X-rays greatly impacted science and everyday life. Their existence broke the idea that knowledge had reached a limiting step. In general, people regarded x-rays as a marvel of science, but reactions against their use were also found. Several applications were proposed, especially in medicine. However, little or no attention was paid to security measures, leading to health damages and even death. The development of the radiological protection took into account the accidents with the x-rays.

  17. Structural properties of the red-color overglazes on the Kakiemon-style porcelains produced in the later 17th century by means of X-ray diffraction (I Propriedades estruturais, por difração de raios X, de esmaltes vermelhos de porcelanas do estilo Kakiemon produzidos no fim do século 17 (I

    Directory of Open Access Journals (Sweden)

    M. Hidaka

    2009-06-01

    Full Text Available Kakiemon-style porcelains produced at Arita areas (SAGA in Kyushu Island are famous Japanese porcelains. The porcelain-techniques creating its elegant and bright red-color underglaze and overglaze were found and developed in 1650's (early Edo period first by Kakiemon kiln. Red-color overglaze and transparent glaze of the Kakiemon-style porcelains have been investigated by means of X-ray diffraction using synchrotron radiation. The results suggest that the red-color brightness is mainly induced by micro-structural correlation between α-Fe2O3 fine particles, as red-color emission elements, and other oxides of SiO2, Al2O3, CaO, KNaO, PbO. The stability of the red-overglaze on the porcelain surface is related to interfacial fusion of the glasses existing in the fritted red-overglaze and the transparent glaze on the porcelain body. The ancient porcelain-techniques of the Kakiemon-style porcelains are clearly based on the micro-structural and material properties of the overglazes, the underglazes, and the transparent glazes, though the techniques were experimentally and accidentally found and developed in the Edo period.As porcelanas do estilo Kakiemon produzidas nas áreas de Arita (SAGA na ilha Kyushu são porcelanas japonesas famosas. As técnicas de produzir porcelanas com os elegantes e brilhantes vidrados de cores vermelho brilhante foram encontradas e desenvolvidas nos anos 1650 (início do período Edo primeiramente em fornos Kakiemon. Vidrados vermelhos e vidrados transparentes de porcelanas do estilo Kakiemon foram investigadas por meio de difração de raios X com radiação sincrotron. Os resultados sugerem que o brilho de cor vermelha é principalmente induzido pela correlação microestrutural entre finas partículas de α-Fe2O3, como elementos emissores de cor vermelha, além de outros óxidos como SiO2, Al2O3, CaO, KNaO, e PbO. A estabilidade dos vidrados na superfície da porcelana com vidrado vermelho está relacionada com a fus

  18. Avaliação e caracterização de tubos fabricados com PVC reciclado

    Directory of Open Access Journals (Sweden)

    Luiz Carlos G. Pennafort Jr

    2013-01-01

    Full Text Available Neste trabalho foram caracterizados dois polímeros utilizados na fabricação de tubos de PVC, tendo como diferencial o uso de resina de policloreto de vinila virgem e reciclada. O uso da resina reciclada, derivada do reprocessamento de resíduos aterrados (sanitários ou industriais, foi avaliado com o objetivo de compará-la a produtos fabricados com resina virgem, os quais foram submetidos aos ensaios de Fluorescência de Raios X (FRX, Difração de Raios X (DRX e resistência à tração e alongamento. Os resultados demonstraram que houve alteração estatisticamente significativa, conforme ANOVA (5%, nas características mecânicas do produto final, tendo os tubos fabricados com PVC reciclado apresentado uma resistência mecânica menor que os fabricados com resina virgem, além da presença de metais pesados como Pb (chumbo e Cd (cádmio.

  19. Tetragonal-to-Tetragonal Phase Transition in Lead-Free (KxNa1−xNbO3 (x = 0.11 and 0.17 Crystals

    Directory of Open Access Journals (Sweden)

    Dabin Lin

    2014-06-01

    Full Text Available Lead free piezoelectric crystals of (KxNa1−xNbO3 (x = 0.11 and 0.17 have been grown by the modified Bridgman method. The structure and chemical composition of the obtained crystals were determined by X-ray diffraction (XRD and electron probe microanalysis (EPMA. The domain structure evolution with increasing temperature for (KxNa1−xNbO3 (x = 0.11 and 0.17 crystals was observed using polarized light microscopy (PLM, where distinguished changes of the domain structures were found to occur at 400 °C and 412 °C respectively, corresponding to the tetragonal to tetragonal phase transition temperatures. Dielectric measurements performed on (K0.11Na0.89NbO3 crystals exhibited tetragonal to tetragonal and tetragonal to cubic phase transitions temperatures at 405 °C and 496 °C, respectively.

  20. Impact of intense x-ray pulses on a NaI(Tl)-based gamma camera

    Science.gov (United States)

    Koppert, W. J. C.; van der Velden, S.; Steenbergen, J. H. L.; de Jong, H. W. A. M.

    2018-03-01

    In SPECT/CT systems x-ray and γ-ray imaging is performed sequentially. Simultaneous acquisition may have advantages, for instance in interventional settings. However, this may expose a gamma camera to relatively high x-ray doses and deteriorate its functioning. We studied the NaI(Tl) response to x-ray pulses with a photodiode, PMT and gamma camera, respectively. First, we exposed a NaI(Tl)-photodiode assembly to x-ray pulses to investigate potential crystal afterglow. Next, we exposed a NaI(Tl)-PMT assembly to 10 ms LED pulses (mimicking x-ray pulses) and measured the response to flashing LED probe-pulses (mimicking γ-pulses). We then exposed the assembly to x-ray pulses, with detector entrance doses of up to 9 nGy/pulse, and analysed the response for γ-pulse variations. Finally, we studied the response of a Siemens Diacam gamma camera to γ-rays while exposed to x-ray pulses. X-ray exposure of the crystal, read out with a photodiode, revealed 15% afterglow fraction after 3 ms. The NaI(Tl)-PMT assembly showed disturbances up to 10 ms after 10 ms LED exposure. After x-ray exposure however, responses showed elevated baselines, with 60 ms decay-time. Both for x-ray and LED exposure and after baseline subtraction, probe-pulse analysis revealed disturbed pulse height measurements shortly after exposure. X-ray exposure of the Diacam corroborated the elementary experiments. Up to 50 ms after an x-ray pulse, no events are registered, followed by apparent energy elevations up to 100 ms after exposure. Limiting the dose to 0.02 nGy/pulse prevents detrimental effects. Conventional gamma cameras exhibit substantial dead-time and mis-registration of photon energies up to 100 ms after intense x-ray pulses. This is due PMT limitations and due to afterglow in the crystal. Using PMTs with modified circuitry, we show that deteriorative afterglow effects can be reduced without noticeable effects on the PMT performance, up to x-ray pulse doses of 1 nGy.

  1. Moessbauer and muon spin relaxation investigation of magnetic and superconducting properties of Ca{sub 1-x}Na{sub x}Fe{sub 2}As{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Materne, Philipp; Bubel, Sirko; Maeter, Hemke; Sarkar, Rajib; Klauss, Hans-Henning [Institut fuer Festkoerperphysik, Technische Universitaet Dresden, 01062 Dresden (Germany); Harnagea, Luminita; Wurmehl, Sabine; Buechner, Bernd [IFW Dresden, Postfach 270016, 01171 Dresden (Germany); Luetkens, Hubertus [Paul-Scherrer-Institut, 5232 Villigen (Switzerland)

    2013-07-01

    The antiferromagnetic parent compound, CaFe{sub 2}As{sub 2}, shows a supression of the spin density wave and a subsequent superconducting state upon partial substitution of Ca by Na. Along the substitution series, superconducting transition temperatures up to ∼35 K were found. We studied the electronic phase diagram of Ca{sub 1-x}Na{sub x}Fe{sub 2}As{sub 2} using Moessbauer spectroscopy and muon spin relaxation experiments. We have analyzed the data in terms of magnetic and superconducting properties and possible coexistence of superconductivity and spin density wave order. We compared our results with recently published data of Ba{sub 1-x}Na{sub x}Fe{sub 2}As{sub 2}.

  2. Understanding the conductive channel evolution in Na:WO(3-x)-based planar devices.

    Science.gov (United States)

    Shang, Dashan; Li, Peining; Wang, Tao; Carria, Egidio; Sun, Jirong; Shen, Baogen; Taubner, Thomas; Valov, Ilia; Waser, Rainer; Wuttig, Matthias

    2015-04-14

    An ion migration process in a solid electrolyte is important for ion-based functional devices, such as fuel cells, batteries, electrochromics, gas sensors, and resistive switching systems. In this study, a planar sandwich structure is prepared by depositing tungsten oxide (WO(3-x)) films on a soda-lime glass substrate, from which Na(+) diffuses into the WO(3-x) films during the deposition. The entire process of Na(+) migration driven by an alternating electric field is visualized in the Na-doped WO(3-x) films in the form of conductive channel by in situ optical imaging combined with infrared spectroscopy and near-field imaging techniques. A reversible change of geometry between a parabolic and a bar channel is observed with the resistance change of the devices. The peculiar channel evolution is interpreted by a thermal-stress-induced mechanical deformation of the films and an asymmetric Na(+) mobility between the parabolic and the bar channels. These results exemplify a typical ion migration process driven by an alternating electric field in a solid electrolyte with a low ion mobility and are expected to be beneficial to improve the controllability of the ion migration in ion-based functional devices, such as resistive switching devices.

  3. Peak potential meter applied to X-ray tubes in mammal radiography systems; Medidor do potencial de pico aplicado em tubos de raio-X de sistemas mamograficos

    Energy Technology Data Exchange (ETDEWEB)

    Schiabel, Homero; Frere, Annie F [Sao Paulo Univ., Sao Carlos, SP (Brazil). Escola de Engenharia; Andreeta, Jose P [Sao Paulo Univ., Sao Carlos, SP (Brazil). Inst. de Fisica e Quimica

    1990-12-31

    It is of a great importance to identify accurately the real peak potential (or simply, KVp) applied to a X-ray tube purposed to medical diagnosis, since it defines the beam energetic quality in terms of photons penetration power. Mainly in mammographic systems. it is of fundamental relevance the KVp accurate measurement because the soft tissues involved in this kind of examination provides different absorption - and, hence, clear contrast on mammographic film - just in a very restrict energetic range. Thus a device to measure KVp with adequate accuracy in mammographic units, using the basic principles of scintillation detection, was developed. This system is therefore composed of a NaI(Tl) crystal which is a X-ray sensor - replacing radiographic films which usually are a source of errors in these measurements - , a photo multiplier tube and changed into amplified electric pulses. Finally the electronic circuit, after adequate pulses treatment, shows instantaneously the actual KVp value in the test on displays. (author) 2 refs.

  4. Efeitos de área e de borda sobre a estrutura florestal em fragmentos de floresta de terra-firme após 13-17 anos de isolamento Area and edge effects on forest structure in Amazonian forest fragments after 13-17 years of isolation

    Directory of Open Access Journals (Sweden)

    Henrique E. M. Nascimento

    2006-01-01

    Full Text Available As estimativas de densidade e biomassa de árvores vivas com DAP > 10 cm e arvoretas 1-9,9 cm de DAP, liteira lenhosa grossa caída (LCG diâmetro > 10 cm, árvores mortas em pé (> 10 de DAP e liteira lenhosa fina caída (LCF - 2,5 9,9 cm de diâmetro foram quantificadas em 56 parcelas permanentes de 1 ha, distribuídas em quatro categorias de tamanho de fragmento - fragmentos de 1 ha (4 parcelas, fragmentos de 10 ha (12 parcelas e fragmentos de 100 ha (14 parcelas e floresta contínua (19 parcelas e em duas classes de distância da borda - 300 m (21 parcelas. A densidade e a biomassa de árvores e arvoretas de espécies de estágios sucessionais mais avançados não diferiram significativamente entre as diferentes categorias de tamanho e entre as duas distâncias da borda. Por outro lado, fragmentos florestais e locais 300 m da borda, respectivamente. Fragmentos florestais apresentaram maior quantidade de LCG e LCF do que a floresta contínua. Houve também diferenças significativas entre ambas as distâncias da borda para a quantidade de LCG e LCF e necromassa total. Uma análise de covariância mostrou que não houve efeito de tamanho do fragmento, mas a distância da borda teve um efeito significativo sobre a quantidade de LCG e LCF. A quantidade de LCG e LCF foi correlacionada negativamente com a distância da borda - locais mais próximos à borda tiveram cerca de 40% e 60% mais LCG do que locais mais distantes.Density and biomass of live trees >10 cm DBH and saplings 1-9.9 cm DBH, coarse woody debris (LCG diameter > 10 cm, fine woody debris (LCF diameter 2.5-9.9 cm, and standing dead trees (> 10 cm DBH were quantified in 56 permanent, 1-ha sample plots. These plots are located in four 1- (4 plots, three 10- (12 plots and two 100- (14 plots forest fragments in size and nearby continuous forests (19 plots as well as in two classes of distance from the edges - 300 m (21 plots. Density and biomass of primary species did not differ

  5. Solid state reactions of MoO3 and Na2MoO4 with (U.85,Ce.15)O2x

    International Nuclear Information System (INIS)

    Dahale, N.D.; Keskar, Meera; Singh Mudher, K.D.; Chawla, K.L.

    1999-01-01

    (U .85 ,Ce .15 )MoO 6-x was prepared by the solid state reactions of (U .85 ,Ce .15 )O 2±x with MoO 3 in air at 600 deg C. Solid state reactions of Na 2 MoO 4 with (U .85 ,Ce .15 )MoO 6.x up to 550 deg C in air led to the formation of Na 2 (U .85 ,Ce .15 )Mo 2 O 10-x and Na 2 (U .85 , Ce .15 ) 2 Mo 3 O 16-x . These compounds were characterised by x-ray and thermal methods. The x-ray powder data of (U .85 , Ce .15 ) MoO 6-x were indexed on monoclinic system whereas, data of Na 2 (U .85 ,Ce .15 ) Mo 2 O 10-x and Na 2 (U .85 ,Ce .15 ) 2 Mo 3 O 16-x were indexed on orthorhombic and monoclinic system respectively. (author)

  6. X-ray Spectrometry: Basic principles; Espectrometria de raios X: princípios básicos

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, R.M.; Teixeira, G.J.; Cardoso, R.S.; Peixoto, J.G.P., E-mail: rmcarvalho91@gmail.com [Instituto de Radioproteção e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2017-07-01

    The application of X rays requires a study of its spectrum. Intrinsic difficulties of the own method and of all the instrumentation necessary for the accomplishment of this practice were related. The objective was to demonstrate the use of a commercial spectrometer using at room temperature and compare it with spectra theoretically obtained by simulation. As an initial result was that both instrumentation is compatible to be used in an X-ray beam, with and without scattering material and its theoretical data were obtained. (author)

  7. The biosafety of X-ray in bed; A biosseguranca dos raios-X no leito

    Energy Technology Data Exchange (ETDEWEB)

    Costa, A.S.; Vinco, Y.C.; Machado, C.P., E-mail: yasmin_claise@hotmail.com [Unigrancapital, Cidade Grande, MS (Brazil)

    2015-07-01

    This work aims to raise awareness on biosafety that the professional radiology needs to develop, for their own protection as well as the patient in bed during the examination of the X-ray. Assess why the use of many artifacts and discuss their safe use, the conditions necessary for operating activities that employ radioactive and radiological techniques are adopted for the benefit of society. Taking also into account the protection of workers, the public, and the patient environment. This study aims to evaluate the knowledge of technical professionals working in the field-performing x -rays in bed, currently academic course in radiology technologist. The results obtained show that 67 % of technicians, technologists’ future, use the personal protective equipment, and 25 % sometimes and never use 8 %, 92 %. Answered that in the period that is being performed on X -ray examination bed, but there are others bedridden in the same environment, with 88 % of patients in bed in bed not receive personal protective equipment nor collective protection equipment. Thus, we conclude that most technicians have cognition existing risks, so the individual protection measures are being carried out, but not by all. What still leaves to be desired is the protection of the patient in bed. These professionals need to be encouraged to study, so that we have trained professionals and holders of knowledge, enabling the improvement in labor and protection of professional and patient. (author)

  8. Adsorption of xylene para- and meta- isomers in NaX and BaX zeolites. Study of properties-structure relations; Adsorption des isomeres para- et meta- du xylene dans les zeolithes NaX et BaX. Etude des relations proprietes-structure

    Energy Technology Data Exchange (ETDEWEB)

    Descours, A.

    1997-02-14

    The separation of para-xylene from C8 aromatics is performed industrially bu adsorption process on zeolitic molecular sieves. The sorption properties of these zeolites are strongly linked to their structure, and their comprehension require an accurate knowledge of the interactions between sorbate molecules and zeolitic structure. The aim of this work is to characterise from a structural point of view the adsorption of para- and meta-xylenes in BaX and NaX zeolites. The former is selective for para-xylene, and the latter has not selective properties for para- and meta-isomers of xylene. For each zeolite, the adsorption of pure para-xylene and meta-xylene or a mixture of the two isomers, is investigated as a function of coverage. Powder neutron diffraction is used to determine the crystalline structure of these zeolites and the different crystallographic adsorption sites of the molecules. The influence of coverage on sorbate-sorbent and sorbate-sorbate interactions is investigated. Infrared spectroscopy allows to determine the chemical environment of the sorbate molecules at low coverage or when the coverage increases, and is particularly effective for the study of the binary mixture of xylenes. This study is performed by sorbing a mixture of xylene isomers, or by sorbing these isomers successively. Infrared studies and crystallographic analysis are compared in order to get a consistent description of adsorption mechanism of xylene isomers for both zeolites as a function of coverage. The role of coverage, of cation type, an the presence of the two xylene isomers is the super-cages is essential. For both zeolites, the increase of coverage actually leads to steric hindrances between sorbed molecules and molecular rearrangements. These reorganizations are connected to the cationic distribution of NaX and BaX zeolites. The sorbed molecules are connected to the cationic distribution of NaX and BaX zeolites. The sorbed molecules are particularly confined in BaX zeolite

  9. Structural, magnetic and magnetocaloric properties of La{sub 0.8}Ca{sub 0.2−x}Na{sub x}MnO{sub 3} manganites (0≤x≤0.2)

    Energy Technology Data Exchange (ETDEWEB)

    Choura Maatar, S. [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Sfax University, B.P. 1171, 3000 Sfax (Tunisia); M’nassri, R. [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Sfax University, B.P. 1171, 3000 Sfax (Tunisia); Institut NEEL, CNRS, B.P.166, 38042 Grenoble Cedex 9 (France); Cheikhrouhou Koubaa, W., E-mail: wissem.koubaa@yahoo.fr [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Sfax University, B.P. 1171, 3000 Sfax (Tunisia); Koubaa, M. [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Sfax University, B.P. 1171, 3000 Sfax (Tunisia); Cheikhrouhou, A. [Laboratoire de Physique des Matériaux, Faculté des Sciences de Sfax, Sfax University, B.P. 1171, 3000 Sfax (Tunisia); Centre de Recherche en Informatique, Multimédia et Traitement Numérique des Données, Technopole de Sfax, Cité El Ons, Route de Tunis, Km 9, Sfax. B.P. 275, Sakiet Ezzit, 3021 Sfax (Tunisia)

    2015-05-15

    In this work, we report the effect of Na doping on the structural, magnetic and magnetocaloric properties in La{sub 0.8}Ca{sub 0.2−x}Na{sub x}MnO{sub 3} powder samples. Our polycristalline samples have been synthesized using the solid-state reaction method at high temperatures. The parent compound La{sub 0.8}Ca{sub 0.2}MnO{sub 3} crystallizes in the orthorhombic system with Pbnm space group. Na doping induces a structural transition from orthorhombic (Pbnm space group) to rhombohedral (R-3C space group) symmetry. Magnetization measurements versus temperature in a magnetic applied field of 50 mT showed that all our investigated samples display a paramagnetic-ferromagnetic transition with decreasing temperature. The Curie temperature T{sub C} increases with Na content from 240 K for x=0 to 330 K for x=0.2. A large magnetocaloric effect has been observed in all samples, the maximum entropy change, |∆S{sub M}|{sub max}, shifts to smaller values with increasing Na content, from4.56 J/kg K (x=0.05) to 2.3 J/kg K (x=0.2) under a magnetic field change ∆µ{sub 0}H of 2 T. For the same applied magnetic field of 2 T, the Relative Cooling Power (RCP) values are found to be constant around 91 J/kg. - Graphical abstract: Sodium doping induces an increase of T{sub C} from 240 K for x=0 to 330 K for x=0.2. - Highlights: • La{sub 0.8}Ca{sub 0.2−x}Na{sub x}MnO{sub 3} are synthesized using the ceramic method at high temperatures. • Na doping induces a structural transition from Pbnm to R-3C space group. • T{sub C} increases with Na content from 240 K for x=0 to 330 K for x=0.2. • RCP is constant around 91 J/kg for all compounds under 2 T.

  10. Designing from a Disabled Body: The Case of Architect Marta Bordas Eddy

    Directory of Open Access Journals (Sweden)

    Natalia Pérez Liebergesell

    2018-01-01

    Full Text Available Studies on design, disability and phenomenology offer rich insights into how the designed environment is experienced by people with different abilities. In architectural design, this experience is only starting to become recognized as a valuable resource for designers. Considering disability as a particular kind of experience, we report on the focused ethnography of architect Marta Bordas Eddy’s design practice. We analyze how her design practice and outcomes connect with her embodied experience of being a wheelchair user and the role of architecture therein. We interviewed Marta, her sister/co-worker and her life partner/co-habitant, gathered design documents, and analyzed the house she designed for and by herself. Our study highlights how Marta’s experience of being disabled, combined with her background, informs how she assesses design and establishes distinct architectural qualities. Being a disabled person and a designer enables Marta to detect problems in an intuitive body-based manner and think of solutions at the same time. The analysis of Marta’s house moreover raises awareness of architecture’s role in (disabled people’s lives insofar it can support or impair human capabilities. It challenges prevailing views of what a house for a disabled person looks and is like, and how design can neutralize apparently restricted capabilities.

  11. Use of rice husk ash as only source of silica in the formation of mesoporous materials Emprego da cinza da casca de arroz como única fonte de sílica na formação de materiais mesoporosos

    Directory of Open Access Journals (Sweden)

    A. J. Schwanke

    2013-03-01

    Full Text Available This paper reports the synthesis of molecular sieves similar to MCM-41 using rice husk ash as only source of silica. For comparison purposes, a standard synthesis was performed using aerosil 200 commercial silica. The rice husk silica was obtained by heating treatment at 600 ºC and leaching for 2 h in reflux with HCl 1mol.L-1 and used in the synthesis. The samples prepared were characterized by N2 adsorption, X-ray diffraction (XRD, scanning electronic microscopy (SEM and thermogravimetric analysis (TG. By type-IV adsorption isotherms, the formation of mesoporous materials was observed. XRD showed the formation of hexagonal unidirectional pore materials similar to MCM-41. By SEM, it could be observed that the rice husk has fibrous aspect and that synthesis using calcined and leached rice husk did not react entirely because silica was only partially dissolved.Este trabalho relata o estudo da síntese de peneiras moleculares semelhantes à MCM-41, empregando cinza da casca de arroz como única fonte de sílica. Para critérios de comparação uma síntese foi realizada com sílica comercial aerosil 200. A sílica da casca de arroz foi obtida mediante tratamento térmico a 600 ºC e lixiviação em refluxo por 2 h com HCl 1 mol/L e empregada na síntese. As amostras preparadas foram caracterizadas por adsorção de N2, difração de raios X, microscopia eletrônica de varredura (MEV e termogravimetria. Por meio das isotermas de adsorção, do tipo IV, observa-se a formação de material mesoporoso. Nos difratogramas de raios X é identificada a formação hexagonal unidirecional de poros, indicando que material apresenta semelhanças com a MCM-41. Por MEV observa-se que a casca de arroz possui aspecto fibroso e que a síntese empregando a casca de arroz calcinada e lixiviada não reagiu na sua totalidade devido a dissolução parcial da sílica.

  12. RADIÓLISE DE AMINOÁCIDO SOB AÇÃO DE ÍONS PESADOS: IMPLICAÇÕES EM ASTROQUÍMICA E ASTROBIOLOGIA

    Directory of Open Access Journals (Sweden)

    Williamary Portugal

    2013-12-01

    Full Text Available Neste trabalho, estudamos a estabilidade da molécula de glicina na sua forma zwiteriônica cristalina, conhecida como a-glycina (+NH3CH2COO- a duas temperaturas (14 e 300 K, sob a ação de íons rápidos, simulando ambientes espaciais na presença de raios cósmicos pesados. Para tanto, a meia vida da glicina bombardeada no meio interestelar (nuvens densas foi estimada, sendo 1.1 x 104 anos (300 K e 1.6 x 103 anos (14 K. No sistema solar, os valores foram de 1.2 x 103 anos (300 K e 2.8 x 103 anos (14 K. O estudo da estabilidade da glicina, nesses ambientes, traz à tona questões sobre o papel dessa molécula na química pré-bióticana Terra, para auxiliar nas descobertas sobre a origem da vida como a conhecemos.

  13. Radiometer evaluation of X-rays equipment in the region of Aracatuba, Sao Paulo, Brazil;Avaliacao radiometrica de raios-X na regiao de Aracatuba, Sao Paulo

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Marco A.R. [UNESP, Botucatu, SP (Brazil). Faculdade de Medicina; Kanezawa, Jorge S. [Centro de Ensino e Tecnologia de Aracatuba (CETEA), SP (Brazil)

    2009-07-01

    This paper presents the basic concepts of radiation protection to guide the health care professionals who use equipment emitting ionizing radiation on the correct handling of the beams of radiation. Radiometric evaluations were conducted in 1665 in X-ray equipment, installed in dental surgeries and clinics, hospitals and radiology services, during the years 1996 to 2003 in the region of Aracatuba. Tests of radiometry are presented as a technical report where the parameters are quantified physical and radiological verifying its compliance with the established by legislation. The distribution of reports by type of unit shows that the vast majority of equipment is of periapical dental x-rays (72%), 25% of equipment is medical equipment for radiology and 3% is dental equipment panoramic model (orthodontic documentation). Among the physical parameters analyzed, the length of the browser was showing more variance compared to the required by law, this fact may also contribute to gaps in the rate of the radiation dose and the size of field in the skin of the patient, the that can easily be resolved simply to replace the piece at the outlet of the head. During the completion of visits to services, it also noted a gap in the training of professionals who operate this equipment emitting radiation, warning of the need for specific training in the area. (author)

  14. Investigação da influência do processamento na dinâmica molecular de nanocompósitos de policarbonato e argila organofílica obtidos via intercalação por fusão On the influence of processing parameters on the molecular dynamics of melt intercalated polycarbonate-clay nanocomposites

    Directory of Open Access Journals (Sweden)

    Elton J. da R. Rodrigues

    2012-01-01

    Full Text Available Nanocompósitos baseados em policarbonato e argila organofílica foram obtidos pelo método de intercalação por fusão em câmara de mistura sob diferentes valores de torque e temperatura. A influência desses parâmetros na qualidade da dispersão da argila na matriz polimérica foi investigada por ressonância magnética nuclear (RMN de baixo campo, empregando o tempo de relaxação longitudinal, T1H, e por difração de raios X. As diferenças nos tempos de relaxação longitudinal e nos padrões de difração de raios X foram correlacionadas com a formação de domínios com mobilidades distintas. O nanomaterial formado apresentou morfologia intercalada com afastamento crescente das camadas de argila, conforme as condições de processamento se tornavam mais severas. A RMN ¹H mostrou que tanto o cisalhamento quanto a temperatura afetaram a mobilidade das cadeias poliméricas, explicitando a homogeneidade crescente da distribuição dos domínios de relaxação, de acordo com o aumento do torque e da temperatura.Polycarbonate-organofilic clay nanocomposites were obtained via the melt intercalation method in the blending chamber of a torque rheometer, under distinct values of shear and temperature. The influence of those processing parameters on the clay dispersion in the polymer matrix was probed by low-field nuclear magnetic resonance (NMR, using the T1H measurement technique and by wide angle X-ray scattering (WAXS. The differences in longitudinal relaxation times and in the X-ray reflection patterns were correlated with the formation of relaxation domains with particular molecular mobility, as progressively larger intercalated morphologies were found in the nanocomposites due to the increase of shear stress and temperature. ¹H NMR has shown that both shearing and temperature have played a fundamental part on the polymer chains mobility, which explains the increase in the domain´s homogeneity following the increment of those processing

  15. Transport properties of Na doped La sub 1 sub - sub x Ca sub x sub - sub y Na sub y MnO sub 3 measured in a pulsed magnetic field

    CERN Document Server

    Bhattacharya, S; Pal, S; Chatterjee, P; Mukherjee, R K; Chaudhuri, B K

    2002-01-01

    Temperature-dependent magnetization and magnetoresistance of the Na doped La sub 1 sub - sub x Ca sub x sub sub - sub y Na sub y MnO sub 3 type samples with x=0.3 and 0 T sub p up to 320 K) conductivity data satisfy the variable range hopping (VRH) model. For T > 320 the small polaron hopping model is more appropriate than the VRH model. Even with a very small change of y, the density of states at the Fermi level N(E sub F) changes considerably. The resistivity of these materials measured under pulsed and continuous DC magnetic fields behaves in an identical fashion. The relaxation time (decay time of the magnetic pulse within the sample) varies with field strength, which indicates that, with a change of magnetic field, the ordering of spin in the ferromagnetic regime changes.

  16. Electric conductivity of solid solutions of the Na3-2xMxPO4 (M=Cd, Pb) systems

    International Nuclear Information System (INIS)

    Shekhtman, G.Sh.; Burmakin, E.I.; Smirnov, N.B.; Esina, N.O.

    2002-01-01

    Electric conductivity, phase composition and conductivity character in the system Na 3-2x Cd x PO 4 in the temperature range of 300-750 deg C were studied by the methods of conductometry, X-ray phase and thermal analyses. It was ascertained that maximum values of electric conductivity (6.25x10 -3 S/cm at 300 deg C) are observed near upper concentration boundaries (x ≅ 0.4) of monophase regions in γ-solid solutions. Conductivity of the solid electrolytes studied is of cocationic character. The values of activation energies of Na + and Cd 2+ cation jumping over in solid electrolytes Na 2.7 Cd 0.15 PO 4 are 38.7 and 43.6 kJ/mol respectively according to the NMR data [ru

  17. ANÁLISE DA PAISAGEM DA BACIA HIDROGRÁFICA DO RIO ALMADA (BA COM BASE NA FRAGMENTAÇÃO DA VEGETAÇÃO

    Directory of Open Access Journals (Sweden)

    Maria Eugênia Bruck de Moraes

    2012-04-01

    Full Text Available O estudo da fragmentação da paisagem em uma bacia é de extrema importância por avaliar o status de conservação da vegetação, um recurso essencial para a manutenção da qualidade da água. O presente trabalho apresenta uma análise da fragmentação da paisagem na Bacia Hidrográfica do Rio Almada, localizada no sul da Bahia, abrangendo 9 municípios parcialmente abastecidos pela água desta bacia. Foi realizado o mapeamento dos fragmentos florestais que apresentaram área mínima de 3ha, com base na interpretação da Carta de Uso e Cobertura do Solo elaborada através da classificação supervisionada de imagens Landsat. Para a análise dos fragmentos foram adotadas 5 métricas da paisagem: tamanho, formato, efeito de borda, isolamento e conectividade. Os resultados obtidos demonstram que a BHRA ainda abriga fragmentos bastante representativos, visto que dos 58 fragmentos identificados, 8 têm área acima de 300ha, 20 entre 100 e 300ha, 21 entre 30 e 100ha e 9 entre 3 e 30ha. Com relação ao formato dos fragmentos, constatou-se que apenas 10% dos mesmos apresentam forma circular, indicando que os 90% restantes encontram-se susceptíveis ao efeito de borda, sendo que os mais alongados estão localizados no interior da bacia, provavelmente em função do avanço da pecuária extensiva nessa direção. E quanto ao isolamento dos fragmentos, a análise da conectividade com borda expandida, através de simulações, permitiu identificar que a partir da distância de 200m, 31 dos fragmentos poderiam ser conectados. Assim, pôde-se concluir que o somatório destes fragmentos, caso fossem devidamente conectados, representaria uma área de significativo valor para a conservação de espécies típicas da mata atlântica e, consequentemente, para a manutenção da qualidade da água desta bacia.

  18. Tensometry technique for X-ray diffraction in applied analysis of welding; Tensometria por tecnica de difracao de raios X aplicada na analise de soldagens

    Energy Technology Data Exchange (ETDEWEB)

    Turibus, S.N.; Caldas, F.C.M.; Miranda, D.M.; Monine, V.I.; Assis, J.T., E-mail: snturibus@iprj.uerj.b [Universidade do Estado do Rio de Janeiro (IPRJ/UERJ), Nova Friburgo, RJ (Brazil). Inst. Politecnico

    2010-07-01

    This paper presents the analysis of residual stress introduced in welding process. As the stress in a material can induce damages, it is necessary to have a method to identify this residual stress state. For this it was used the non-destructive X-ray diffraction technique to analyze two plates from A36 steel jointed by metal inert gas (MIG) welding. The stress measurements were made by the sin{sup 2{psi}} method in weld region of steel plates including analysis of longitudinal and transverse residual stresses in fusion zone, heat affected zone (HAZ) and base metal. To determine the stress distribution along the depth of the welded material it was used removing of superficial layers made by electropolishing. (author)

  19. Composition Dependence of the Na(+) Ion Conductivity in 0.5Na2S + 0.5[xGeS2 + (1 - x)PS5/2] Mixed Glass Former Glasses: A Structural Interpretation of a Negative Mixed Glass Former Effect.

    Science.gov (United States)

    Martin, Steve W; Bischoff, Christian; Schuller, Katherine

    2015-12-24

    A negative mixed glass former effect (MGFE) in the Na(+) ion conductivity of glass has been found in 0.5Na2S + 0.5[xGeS2 + (1 - x)PS5/2] glasses where the Na(+) ion conductivity is significantly smaller for all of the ternary glasses than either of the binary end-member glasses. The minimum conductivity of ∼0.4 × 10(-6) (Ω cm)(-1) at 25 °C occurs for the x = 0.7 glass. Prior to this observation, the alkali ion conductivity of sulfide glasses at constant alkali concentration, but variable ratio of one glass former for another (x) ternary mixed glass former (MGF) glasses, has always produced a positive MGFE in the alkali ion conductivity; that is, the ternary glasses have always had higher ion conductivities that either of the end-member binary glasses. While the Na(+) ion conductivity exhibits a single global minimum value, the conductivity activation energy exhibits a bimodal double maximum at x ≈ 0.4 and x ≈ 0.7. The modified Christensen-Martin-Anderson-Stuart (CMAS) model of the activation energies reveals the origin of the negative MGFE to be due to an increase in the dielectric stiffness (a decrease in relative dielectric permittivity) of these glasses. When coupled with an increase in the average Na(+) ion jump distance and a slight increase in the mechanical stiffness of the glass, this causes the activation energy to go through maximum values and thereby produce the negative MGFE. The double maximum in the conductivity activation energy is coincident with double maximums in CMAS calculated strain, ΔES, and Coulombic, ΔEC, activation energies. In these ternary glasses, the increase in the dielectric stiffness of the glass arises from a negative deviation of the limiting high frequency dielectric permittivity as compared to the binary end-member glasses. While the CMAS calculated total activation energies ΔEact = ΔES + ΔEC are found to reproduce the overall shape of the composition dependence of the measured ΔEact values, they are consistently

  20. Meltability in system of K2TaF7-NaF-NaCl-KCl

    International Nuclear Information System (INIS)

    Kartsev, V.E.; Kovalev, F.V.; Korshunov, B.G.

    1975-01-01

    Thermographic and visual-polythermal techniques were used to study the meltability in K 2 TaF 7 -NaF-NaCl-KCl system. The tetrahedron-forming sections NaF-NaCl-K 2 TaF 7 xKCl and NaF-K 2 TaF 7 xKCl-2K 2 TaF 7 xNaCl divide the concentration tetrahedron into three particular tetrahedra: NaF-K 2 TaF 7 xKCl-2K 2 TaF 7 xNaCl-K 2 TaF 7 , NaF-NaCl-K 2 TaF 7 xKCl-2K 2 TaF 7 xaCl, and NaF-NaCl-KCl-K 2 TaF 7 xKCl. Non-variant equilibrium points in all of the particular four-component systems have been determined

  1. Synchrotron-Radiation X-Ray Investigation of Li+/Na+ Intercalation into Prussian Blue Analogues

    Directory of Open Access Journals (Sweden)

    Yutaka Moritomo

    2013-01-01

    Full Text Available Prussian blue analogies (PBAs are promising cathode materials for lithium ion (LIB and sodium ion (SIB secondary batteries, reflecting their covalent and nanoporous host structure. With use of synchrotron-radiation (SR X-ray source, we investigated the structural and electronic responses of the host framework of PBAs against Li+ and Na+ intercalation by means of the X-ray powder diffraction (XRD and X-ray absorption spectroscopy (XAS. The structural investigation reveals a robust nature of the host framework against Li+ and Na+ intercalation, which is advantageous for the stability and lifetime of the batteries. The spectroscopic investigation identifies the redox processes in respective plateaus in the discharge curves. We further compare these characteristics with those of the conventional cathode materials, such as, LiCoO2, LiFePO4, and LiMn2O4.

  2. Avaliação longitudinal de arcadas dentárias individualizadas com o método Borda WALA Lontigitudinal evaluation of dental arches individualizated by WALA ridge

    Directory of Open Access Journals (Sweden)

    Márcia de Fátima Conti

    2011-04-01

    Full Text Available INTRODUÇÃO: a forma da arcada dentária inferior é considerada uma das principais referências no diagnóstico, sendo um fator importante para a estabilidade do tratamento ortodôntico. OBJETIVOS: avaliar as alterações nas distâncias intercaninos e intermolares inferiores durante e 3 anos após a finalização do tratamento ortodôntico, no qual foi utilizado o método Borda WALA para individualização da forma da arcada dentária. MÉTODOS: a amostra foi composta por 20 pacientes (12 do sexo feminino e 8 do masculino, com idade média de 20,88 anos. Os modelos de gesso iniciais, finais e de pós-tratamento foram utilizados para medição das distâncias intercaninos e intermolares no centro da vestibular da coroa clínica e na largura da Borda WALA. Os dados foram avaliados por meio do teste ANOVA dependente seguido pelo teste de Tukey (pINTRODUCTION: The form of mandibular arch is considered one of the main references among the diagnostic tools because the maintenance of this arch form and dimension is an important factor for stability of orthodontic treatment. OBJECTIVES: To evaluate the changes in mandibular intercanine and intermolar widths during orthodontic treatment and 3 years of posttreatment, in which the WALA ridge was used for individualization of the mandibular arch form. METHODS: Sample comprised of 20 patients (12 women and 8 men, with a mean age of 20.88 years. The dental casts of the initial, final and post-treatment evaluation were used for measurement of the intercanine and intermolar distances in the center of the buccal surface of the clinical crown and in the width of the WALA ridge. Data were analyzed by means of ANOVA test followed by Tukey test (p<0.05. RESULTS: Indicated that there was a statistically significant difference in intercanine and intermolar distances among the three stages evaluated. These distances increased significantly with treatment, and presented a reduction in the post-treatment period

  3. (Sr{sub 1-x}Na{sub x})(Cd{sub 1-x}Mn{sub x}){sub 2}As{sub 2}: A new charge and spin doping decoupled diluted magnetic semiconductors with CaAl{sub 2}Si{sub 2}-type structure

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Bijuan; Deng, Zheng; Li, Wenmin; Gao, Moran; Zhao, Guoqiang; Yu, Shuang; Wang, Xiancheng; Liu, Qingqing [Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Li, Zhi [School of Materials Science and Engineering, Hefei University of Technology, Hefei, Anhui 230009 (China); Jin, Changqing, E-mail: Jin@iphy.ac.cn [Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Collaborative Innovation Center of Quantum Matter, Beijing 100190 (China)

    2016-08-28

    We report the synthesis and characterization of a new bulk diluted ferromagnetic semiconductor via Na and Mn co-doping in SrCd{sub 2}As{sub 2} with a hexagonal CaAl{sub 2}Si{sub 2}-type structure. Together with carrier doping via (Sr,Na) substitution, spin doping via (Cd,Mn) substitution results in ferromagnetic order with Curie temperature of T{sub C} up to 13 K. Negative magnetoresistance is assigned to weak localization at low temperatures, where the magnetization of samples becomes saturated. The hexagonal structure of (Sr{sub 1−x}Na{sub x})(Cd{sub 1−x}Mn{sub x}){sub 2}As{sub 2} can be acted as a promising candidate for spin manipulations owing to its relatively small coercive field of less than 24 Oe.

  4. Pycnometric and Spectroscopic Studies of Red Phosphors Ca{sub (1-1.5x)}{sup 2+} WO{sub 4}:Eu{sub x}{sup 3+} Ca{sub (1}-{sub 2x)}{sup 2+} WO{sub 4}:Eu{sub x}{sup 3+},Na{sub x}{sup +}

    Energy Technology Data Exchange (ETDEWEB)

    Cho, Seonwoog [Silla Univ., Busan (Korea, Republic of)

    2013-09-15

    Red phosphors Ca{sub (1-1.5x)}Eu{sub x}WO{sub 4} and Ca{sub (1-2x)}Eu{sub x}Na{sub x}WO{sub 4} were synthesized with various concentrations x of Eu{sup 3+} ions by using a solid-state reaction method. The crystal structure of the red phosphors were found to be a tetragonal scheelite structure with space group I4{sub 1}/a. X-ray diffraction (XRD) results show the (112) main diffraction peak centered at 2θ = 28.71 .deg., and indicate that there is no basic structural deformation caused by the vacancies V{sub Ca}'' or the Eu{sup 3+} (and Na{sup +}) ions in the host crystals. Densities of Ca{sub (1.1.5x)}Eu{sub x}WO{sub 4} were measured on a (helium) gas pycnometer. Comparative results between the experimental and theoretical densities reveal that Eu{sup 3+} (and Na{sup +}) ions replace the Ca{sup 2+} ions in the host CaWO{sub 4}. Also, the photoluminescence (PL) emission and photoluminescence excitation (PLE) spectra show the optical properties of trivalent Eu{sup 3+} ions, not of divalent Eu{sup 2+}. Raman spectra exhibit that, without showing any difference before and after the doping of activators to the host material CaWO{sub 4}, all the gerade normal modes occur at the identical frequencies with the same shapes and weaker intensities after the substitution. However, the FT-IR spectra show that some of the ungerade normal modes have shifted positions and different shapes, caused by different masses of Eu{sup 3+} ions (or Na{sup +} ions, or V{sub Ca}'' vacancies) from Ca2{sup +}.

  5. Evolução temporal da explosão solar de 06 de junho de 2000 apresentando estruturas finas em rádio freqüências

    Science.gov (United States)

    Fernandes, F. C. R.; Sawant, H. S.; Cecatto, J. R.; Caracini, A. G.; Vats, H. O.; Karlický, M.; Meszarosova, H.

    2003-08-01

    Em 06 de junho de 2000 (~15: 00-17: 00 UT), o Brazilian Solar Spectroscope (BSS) registrou uma explosão solar intensa no intervalo de freqüência de (1000-2000) MHz, com alta resolução temporal (100 ms) e espectral (5 MHz). A atividade solar relacionada a esta explosão associada à região ativa (AR) 9026 e classificada como X2.3 foi grande. O Ondrejov Observatory registrou rádio emissões até 4,5 GHz. O satélite SOHO registrou uma série de erupções solares, incluindo uma Ejeção de Massa Coronal (CME) tipo "full-halo" (~15: 54 UT). Explosões tipo II/IV também foram registradas. Na faixa de ondas decimétricas, este evento apresentou dois picos distintos (~15: 21 UT e ~16: 42 UT). O primeiro pico coincide com a explosão registrada em raios-X moles (GOES) e em raios-X duros (Yohkoh). Os espectros dinâmicos com alta resolução do BSS revelaram várias estruturas finas, principalmente emissões tipo "zebra" e "fibra", rádio pulsações, emissões tipo III e do único caso de emissões "zebra" harmônicas observado na faixa decimétrica. Neste trabalho, analisamos a evolução temporal e o comportamento global do evento de 06 de junho de 2000, com ênfase na identificação e associação da ocorrência de cada tipo de estrutura fina registrada em rádio com cada etapa da explosão. Resultados preliminares mostraram que, na fase pré-flare, as estruturas finas apresentaram taxa de deriva negativa (~ 70-190 MHz/s). As emissões tipo "zebra" concentram-se na fase de descida do primeiro pico impulsivo e na de subida do segundo pico. Enquanto que as emissões tipo "fibra" ocorrem em ambas fases, mas preferivelmente durante a fase de descida. Os resultados serão apresentados e discutidos.

  6. Characterization of X-ray irradiator RS-2000; Caracterizacao do irradiador de raios X RS-2000

    Energy Technology Data Exchange (ETDEWEB)

    Mazaro, Sarah Jessica; Pavoni, Juliana Fernandes [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Departamento de Fisica; Silva, Maelson do Nascimento; Bianchini, Adriano L.B.; Amaral, Leonardo Lira do, E-mail: sarahmazaro@yahoo.com.br [Universidade de Sao Paulo (HC/FMRP/USP), Ribeirao Preto, SP (Brazil). Hospital das Clinicas. Faculdade de Medicina. Servico de Radioterapia

    2014-04-15

    Gamma irradiators are being replaced by the x - rays ones which are more economical and have greater safety benefits compared to the radionuclide irradiators. Some tests are usually performed to ensure quality control while working with radiation, as constancy, linearity, repeatability, reproducibility, radiometric survey and security tests. Evaluating the technical parameters and the instrument and equipment performance quickly. The irradiator characterization determines its operation, by ensuring that the deposited dose is the one desired. This study aims to characterize x-rays irradiators through dosimetric tests. The equipment used in this study stable in dose rate free space and regularity for safety test. Furthermore, the measurements were reproducible with a maximum variation of 10% and the radiometric survey showed that the results are consistent with the exemption requirements of radiological protection described in regulatory position 3.01/001:2011. (author)

  7. Superconductivity in Na{sub 1-x}CoO{sub 2}.yH{sub 2}O thin films

    Energy Technology Data Exchange (ETDEWEB)

    Hildebrandt, Sandra; Komissinkiy, Philipp; Alff, Lambert [Institute for Materials Science, TU Darmstadt (Germany); Fritsch, Ingo; Habermeier, Hanns-Ulrich [Max-Planck-Institute for Solid State Research, Stuttgart (Germany); Lemmens, Peter [Institute for Condensed Matter Physics, TU Braunschweig (Germany)

    2010-07-01

    Sodium cobaltate (Na{sub 1-x}CoO{sub 2}) is a novel material with thermoelectric behavior, charge and spin ordered states dependent on the sodium content in the composition. A superconducting phase was found in water intercalated sodium cobaltate (Na{sub 1-x}CoO{sub 2}.yH{sub 2}O) with x=0.65-0.7 and y=0.9-1.3. The pairing state is still under debate, but there are some indications for a spin-triplet or p-wave superconducting pairing state. First films of Na{sub 1-x}CoO{sub 2}.yH{sub 2}O with a superconducting transition temperature near 5 K have been successfully grown. Here we report on thin films of Na{sub 1-x}CoO{sub 2} grown by pulsed laser deposition technique. The deposition parameters, sodium deintercalation and water intercalation conditions are tuned in order to obtain the superconducting phase. The instability of this phase might be an indication for triplet superconductivity, which is known to be affected strongly by impurities and defects.This observation is in agreement with the fact that so far also no superconducting thin films of the most famous triplet superconductor Sr{sub 2}RuO{sub 4} have been reported.

  8. Impact of intense x-ray pulses on a NaI(Tl)-based gamma camera

    NARCIS (Netherlands)

    Koppert, Wilco J C; van der Velden, Sandra; Steenbergen, J H Leo; de Jong, Hugo W A M

    2018-01-01

    INTRODUCTION: In SPECT/CT systems X-ray and -ray imaging is performed sequentially. Simultaneous acquisition may have advantages, for instance in interventional settings. However, this may expose a gamma camera to relatively high X-ray doses and deteriorate its functioning. We studied the NaI(Tl)

  9. Preparation by Poly(Acrylic Acid) Sol-Gel Method and Thermoelectric Properties of γ-Na x CoO2 Bulk Materials

    Science.gov (United States)

    Li, Xiaoyu; Zhang, Li; Tang, Xinfeng

    2017-11-01

    γ-Na x CoO2 single-phase powders have been synthesized by a poly(acrylic acid) (PAA) sol-gel (SG) method, and γ-Na x CoO2 bulk ceramic fabricated using spark plasma sintering. The effects of the PAA concentration on the sample phase composition and morphology were investigated. The thermoelectric properties of the γ-Na x CoO2 bulk ceramic were also studied. The results show that the PAA concentration did not significantly affect the crystalline phase of the product. However, agglomeration of γ-Na x CoO2 crystals was suppressed by the steric effect of PAA. The Na x CoO2 bulk ceramic obtained using the PAA SG method had higher crystallographic anisotropy, better chemical homogeneity, and higher density than the sample obtained by solid-state reaction (SSR), leading to improved thermoelectric performance. The PAA SG sample had power factor (in-plane PF = σS 2) of 0.61 mW m-1 K-2 and dimensionless figure of merit ( ZT) along the in-plane direction of 0.19 at 900 K, higher than for the SSR sample (in-plane PF = 0.51 mW m-1 K-2, in-plane ZT = 0.17). These results demonstrate that a simple and feasible PAA SG method can be used for synthesis of Na x CoO2 ceramics with improved thermoelectric properties.

  10. Fosforitos do Grupo Bambuí na região de Campos Belos (GO)/ Arraias (TO), na borda oeste do Cráton São Francisco

    OpenAIRE

    Monteiro, Cimara Francisca

    2009-01-01

    Os depósitos de fosfato sedimentar da região de Campos Belos (GO) e Arraias (TO) compreendem ate o momento três depósitos de volume reduzido, mas com teores elevados, superiores a 24% P2O5, denominados: São Bento, Coite 1 e Coite 2. Os fosforitos e siltitos fosfatados encontrados na regiao estao inseridos na porcao basal da Formação Sete Lagoas, pertencente ao Grupo Bambui, de idade Neoproterozoica. O Grupo Bambui integra a porção oriental da Faixa de Dobramentos Brasília e tambem compõe ampl...

  11. Car-borne survey measurements with a 3x3` NaI detector

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, E.; Ugletveit, F.; Floe, L.; Mikkelborg, O. [Norwegian Radiation Protection Authority, Oesteraas (Norway)

    1997-12-31

    The Norwegian Radiation Protection Authority (NRPA) took part in the international survey measurement exercise RESUME95 that was arranged in Finland in August 1995. NRPA performed measurements with a simple car-borne measuring system based on standard equipment, a 3x3` NaI detector, an MCA and a GPS connected to a portable PC. The results show substantial variations in dose rate inside areas of a few square kilometres. Spectrum analysis shows that a major part of these differences are caused by variations in deposition of {sup 137}Cs. Our results show that even standard 3x3` NaI detectors can be used for car based survey measurements in fall out situations and search for sources. The detection limits are higher than for larger detectors, but the main limiting factor seem to be the timing capabilities of the acquisition system. (au).

  12. Car-borne survey measurements with a 3x3' NaI detector

    International Nuclear Information System (INIS)

    Larsen, E.; Ugletveit, F.; Floe, L.; Mikkelborg, O.

    1997-01-01

    The Norwegian Radiation Protection Authority (NRPA) took part in the international survey measurement exercise RESUME95 that was arranged in Finland in August 1995. NRPA performed measurements with a simple car-borne measuring system based on standard equipment, a 3x3' NaI detector, an MCA and a GPS connected to a portable PC. The results show substantial variations in dose rate inside areas of a few square kilometres. Spectrum analysis shows that a major part of these differences are caused by variations in deposition of 137 Cs. Our results show that even standard 3x3' NaI detectors can be used for car based survey measurements in fall out situations and search for sources. The detection limits are higher than for larger detectors, but the main limiting factor seem to be the timing capabilities of the acquisition system. (au)

  13. Car-borne survey measurements with a 3x3` NaI detector

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, E; Ugletveit, F; Floe, L; Mikkelborg, O [Norwegian Radiation Protection Authority, Oesteraas (Norway)

    1998-12-31

    The Norwegian Radiation Protection Authority (NRPA) took part in the international survey measurement exercise RESUME95 that was arranged in Finland in August 1995. NRPA performed measurements with a simple car-borne measuring system based on standard equipment, a 3x3` NaI detector, an MCA and a GPS connected to a portable PC. The results show substantial variations in dose rate inside areas of a few square kilometres. Spectrum analysis shows that a major part of these differences are caused by variations in deposition of {sup 137}Cs. Our results show that even standard 3x3` NaI detectors can be used for car based survey measurements in fall out situations and search for sources. The detection limits are higher than for larger detectors, but the main limiting factor seem to be the timing capabilities of the acquisition system. (au).

  14. In Situ Tracking Kinetic Pathways of Li+/Na+ Substitution during Ion-Exchange Synthesis of LixNa1.5-xVOPO4F0.5.

    Science.gov (United States)

    Park, Young-Uk; Bai, Jianming; Wang, Liping; Yoon, Gabin; Zhang, Wei; Kim, Hyungsub; Lee, Seongsu; Kim, Sung-Wook; Looney, J Patrick; Kang, Kisuk; Wang, Feng

    2017-09-13

    Ion exchange is a ubiquitous phenomenon central to wide industrial applications, ranging from traditional (bio)chemical separation to the emerging chimie douce synthesis of materials with metastable structure for batteries and other energy applications. The exchange process is complex, involving substitution and transport of different ions under non-equilibrium conditions, and thus difficult to probe, leaving a gap in mechanistic understanding of kinetic exchange pathways toward final products. Herein, we report in situ tracking kinetic pathways of Li + /Na + substitution during solvothermal ion-exchange synthesis of Li x Na 1.5-x VOPO 4 F 0.5 (0 ≤ x ≤ 1.5), a promising multi-Li polyanionic cathode for batteries. The real-time observation, corroborated by first-principles calculations, reveals a selective replacement of Na + by Li + , leading to peculiar Na + /Li + /vacancy orderings in the intermediates. Contradicting the traditional belief of facile topotactic substitution via solid solution reaction, an abrupt two-phase transformation occurs and predominantly governs the kinetics of ion exchange and transport in the 1D polyanionic framework, consequently leading to significant difference of Li stoichiometry and electrochemical properties in the exchanged products. The findings may help to pave the way for rational design of ion exchange synthesis for making new materials.

  15. Synthesis and thin film growth of alkaline cobaltates Na{sub x}CoO{sub 2} and Li{sub x}CoO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Hildebrandt, Sandra

    2013-02-18

    In this study sol-gel synthesis was used to fabricate Na{sub x}CoO{sub 2}, LiNi{sub 1/2}Co{sub 1/2}O{sub 2} and LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2}. By using acetate precursors a lower process temperature was accessible, which has a positive effect on the sodium and lithium loss during synthesis. The lithium based powders were single phase and kept cation stoichiometry after sintering. A small grain size is favourable for battery applications. Sodium content was slightly reduced after temperature treatment compared to the initial cation mixture, due to the high volatility of Na. To fabricate thin films PLD was used for deposition. All films were deposited on SrTiO{sub 3} substrates. The growth mechanism of Na{sub x}CoO{sub 2} on SrTiO{sub 3} was investigated and an in-plane and out-of-plane relation between film an substrate was found. The films grow 15 and 45 rotated with respect to the ab-plane of the substrate and grow in c-axis direction out-of-plane. The sodium content and the crystallinity of the Na{sub x}CoO{sub 2} was investigated as a function of the post deposition treatment. A change of x between 0.38 and 0.84 can be achieved. The γ-phase was preserved in all films despite of the change of the sodium content. The in-situ variation of sodium stoichiometry, allows to tune the film properties in a wide range. This feature is an advantage compared to bulk Na{sub x}CoO{sub 2}, in which only certain stoichiometries can be stabilized. Fabrication of superconducting thin films Na{sub 0.33}CoO{sub 2}.1.3H{sub 2}O was challenging, since the superconducting phase is metastable and hardly to stabilize as a thin film. LiNi{sub 1/3}Mn{sub 1/3}Co{sub 1/3}O{sub 2} and LiNi{sub 1/2}Co{sub 1/2}O{sub 2} thin films were grown by PLD in (104)-orientation. These thin film materials are promising candidates as cathode materials for the development of thin film batteries.

  16. Magnetic and magnetocaloric properties in La{sub 0.7}Ca{sub 0.3−x}Na{sub x}MnO{sub 3} exhibiting first-order and second-order magnetic phase transitions

    Energy Technology Data Exchange (ETDEWEB)

    Ho, T.A. [Department of Materials Science and Engineering, Korea University, Seoul 136-713 (Korea, Republic of); Dang, N.T. [Institute of Research and Development, Duy Tan University, Da Nang (Viet Nam); Phan, The-Long [Department of Physics and Oxide Research Center, Hankuk University of Foreign Studies, Yongin 449-791 (Korea, Republic of); Yang, D.S. [Physics Division, School of Science Education, Chungbuk National University, Cheongju 361-763 (Korea, Republic of); Lee, B.W. [Department of Physics and Oxide Research Center, Hankuk University of Foreign Studies, Yongin 449-791 (Korea, Republic of); Yu, S.C., E-mail: scyu@chungbuk.ac.kr [Department of Physics, Chungbuk National University, Cheongju 361-763 (Korea, Republic of)

    2016-08-15

    Polycrystalline orthorhombic samples La{sub 0.7}Ca{sub 0.3−x}Na{sub x}MnO{sub 3} (x = 0–0.09) were prepared by solid-state reaction. The study of magnetic properties revealed that the ferromagnetic-paramagnetic (FM-PM) transition temperature (T{sub C}) increases from 255 to about 271 K with increasing Na-doping content (x) from 0 to 0.09, respectively. Around the T{sub C}, we have found the samples showing a large magnetocaloric (MC) effect with maximum values of magnetic entropy change (|ΔS{sub max}|) of 7–8 J kg{sup −1} K{sup −1} and relative cooling power RCP = 232–236 J/kg for the samples x = 0.03–0.09 in a magnetic-field interval ΔH = 40 kOe. Detailed analyses of isothermal magnetization data M(T, H) based on Banerjee's criteria indicated a first-to-second-order magnetic-phase transformation taking place at a threshold Na-doping concentration x{sub c} ≈ 0.06. This could also be observed clearly from the feature of entropy universal curves. An assessment of the magnetic-ordering exponent N = dLn|ΔS{sub m}|/dLnH demonstrates an existence of short-range magnetic order in the samples. We believe that the changes of the magnetic properties and MC effect in La{sub 0.7}Ca{sub 0.3−x}Na{sub x}MnO{sub 3} caused by Na doping are related to the changes in the structural parameters and Mn{sup 4+}/Mn{sup 3+} ratio, which are confirmed by the geometrical and electronic analyses based on X-ray diffraction and X-ray absorption fine structure. - Highlights: • Geometrical and electronic structures of La{sub 0.7}Ca{sub 0.3−x}Na{sub x}MnO{sub 3}. • Threshold of first-to-second-order phase transformation in La{sub 0.7}Ca{sub 0.3−x}Na{sub x}MnO{sub 3}. • Large magneto-caloric effect with |ΔS{sub max}| ≈ 7–8 J kg{sup −1} K{sup −1}, and RCP = 232–236 J/kg. • Universal curve of magnetic-entropy change.

  17. Piezoelectric properties and thermal stability of (Na0.53K0.47-xAgx)Nb1-xSbxO3 ceramics

    International Nuclear Information System (INIS)

    Zheng, Limei; Wang, Jinfeng; Wang, Chunming; Gai, Zhigang; Wu, Qingzao; Zhang, Rui

    2011-01-01

    Many (K 1-x Na x )NbO 3 (KNN)-based ceramics with high piezoelectric performance exhibit undesirable strong temperature dependence due to the orthorhombic-tetragonal polymorphic phase transition near room temperature. In order to improve the temperature stability of the ceramics, many additives have been added into the KNN-based ceramics to shift T O-T down to below room temperature. Contrary to the previous approach (Na 0.53 K 0.47-x Ag x )Nb 1-x Sb x O 3 (NKANS) ceramics with T O-T well above room temperature have been prepared by a conventional solid-state reaction method. The density and the electrical properties are effectively improved by the addition of AgSbO 3 , and optimum piezoelectric properties are found in the ceramics with 0.05 ≤ x ≤ 0.07, with maximum k p ∝ 0.46 for NKANS5 and maximum d 33 ∝ 199 pC/N for NKANS7. More importantly, k p remains virtually almost unchanged up to the T O-T temperature (≥100 C), indicating that the NKANS ceramics exhibit a much improved piezoelectric thermal stability. The analyses suggest that both the high T O-T value and diffuse orthorhombic-tetragonal phase transition should be responsible for the good temperature stability. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  18. Development of multiwire gas detectors for X-rays; Desenvolvimento de detectores a gas multifilares para raios-X

    Energy Technology Data Exchange (ETDEWEB)

    Sales, Eraldo de

    2015-06-01

    This work presents the prototype of a 2D position sensitive gas detector for application in X-ray scattering and diffraction experiments. Starting from a detector initially developed for other applications and will show the required changes on the original concept of this device. The strategy used to determine the necessary adaptations were based on searching in the literature for the overall characteristics of a multi-wire X-ray detector (choice of gas, pressure, window, etc.), the use of simulations, implementation of the changes and finally operational tests. Computational tools were used to calculate the mechanical strength and attenuation of the X-ray photons that helped to determine the most appropriate material for the construction of the entrance window. Detector simulations were built with Garfield software and were used to study the overall properties of the detector, and to determine the optimum parameters for the equipment operation. Typical parameters are the distance between the wires, wire diameter, high voltage to be used, among several other parameters. The results obtained showed that the multi-wire detector concept with the implemented adaptations allowed the detection of X-rays. However, depending on the application, it may be necessary improve the resolution of the equipment, in order to have a better description of the collected data. Several ideas are suggested for this improvement. It is also presented interesting results obtained with a microscopic pattern detector called triple GEM. This device belongs to the Gas Detectors Development group (GDD group) at CERN and was used in my training at this institution. The results showed the potential of the equipment for detection of X-rays. The results and simulations presented in this work, confirmed that the changes in the concept of the original detector permitted it use on X-ray detection applications. Also, it was possible to obtain several indications for further optimization, which may

  19. X-ray escape effects in Si, Ge, and NaI detectors

    International Nuclear Information System (INIS)

    Brunner, G.

    1989-01-01

    A 3-parameter representation of the type x = K 1 [1 -L(ln(1 + 1/L))] together with L = K 2 E K 3 is recommended for the escape to parent peak ratio. Parameter values are provided for Si, Ge, and NaI detectors. Scattering, which has been neglected up to now, is included. (author)

  20. The phase transformation and crystallization kinetics of (1 - x)Li{sub 2}O-xNa{sub 2}O-Al{sub 2}O{sub 3}-4SiO{sub 2} glasses

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Moo-Chin [Department of Fragrance and Cosmetic Science, Kaohsiung Medical University, 100 Shih-Chuan 1st Road, Kaohsiung 807, Taiwan (China); Li, Wang-Long [Institute of Nanotechnology and Microsystems Engineering, National Cheng Kung University, 1 Ta-Hsueh Road, Tainan 70101, Taiwan (China); Cheng, Chih-Wei [Department of Mechanical Engineering, National Kaohsiung University of Applied Sciences, 415 Chien-Kung Road, Kaohsiung 80782, Taiwan (China); Chang, Kuo-Ming; Chen, Yong-Feng [Department of Electrical Engineering, National Cheng Kung University, 1 Ta-Hsueh Road, Tainan 70101, Taiwan (China); Hsi, Chi-Shiung, E-mail: chsi@nuu.edu.tw [Department of Materials Science and Engineering, National United University, 1 Lein-Da, Kung-Ching Li, Miaoli 36003, Taiwan (China)

    2010-09-01

    The phase transformation and crystallization kinetics of (1 - x)Li{sub 2}O-xNa{sub 2}O-Al{sub 2}O{sub 3}-4SiO{sub 2} glasses have been studied by using differential thermal analysis (DTA), X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and electron diffraction (ED) analysis. The crystallization temperature at the exothermic peak increases from 1171 to 1212 K when the Na{sub 2}O content increases from 0 to 0.6 mol. The crystalline phase is composed of spodumene crystallization when the Na{sub 2}O content increases from 0 to 0.6 mol. The activation energy of spodumene crystallization decreases from 444.0 {+-} 22.2 to 284.0 {+-} 10.8 kJ mol{sup -1} when the Na{sub 2}O content increases from 0 to 0.4 mol. Moreover, the activation energy increases from 284.0 {+-} 10.8 to 446.0 {+-} 23.2 kJ mol{sup -1} when the Na{sub 2}O content increases from 0.4 to 0.6 mol. The crystallization parameters m and n approach 2, indicating that the surface nucleation and two-dimensional growth are dominant in (1 - x)Li{sub 2}O-xNa{sub 2}O-Al{sub 2}O{sub 3}-4SiO{sub 2} glasses.

  1. Memory and pressure studies in Na{sub x}CoO{sub 2} cobaltites

    Energy Technology Data Exchange (ETDEWEB)

    Garbarino, G; Bouvier, P; Crichton, W A; Mezouar, M [European Synchrotron Radiation Facility, Grenoble (France); Regueiro, M Nunez; Lejay, P [MCBT, Institut Neel, Grenoble (France); Armand, M [LRCS, Universite Picardie Jules-Verne Amiens, Amiens (France); Foo, M L; Cava, R J, E-mail: gaston.garbarino@esrf.f [Department of Chemistry and Materials Institute, Princeton University, New Jersey (United States)

    2009-03-01

    We present a detailed study on the memory effect results in Na{sub 0.5} paragraph 5CoO{sub 2} single crystals. We analyze the temperature dependence of the nonvolatile current-pulse-induced resistance memory state. These results allow us to have more insight in the mobility of Na{sup +} ions induced by current and their effect on the memory effect. We also developed X-ray diffraction studies under pressure at ambient temperature in the N{sub a0.5}CoO{sub 2} powder compound. An orthorhombic to hexagonal phase transition was observed at 9GPa. This transition can be explained taking into account the Na ions displacement between two allowed positions. These structural results allow us to confirm that the non-volatile resistive commutation can be interpreted by the displacement of the Na ions induced by the current pulses.

  2. Opacity measurements of tamped NaBr samples heated by z-pinch X-rays

    International Nuclear Information System (INIS)

    Bailey, J.E.; Arnault, P.; Blenski, T.; Dejonghe, G.; Peyrusse, O.; MacFarlane, J.J.; Mancini, R.C.; Cuneo, M.E.; Nielsen, D.S.; Rochau, G.A.

    2003-01-01

    Laboratory measurements provide benchmark data for wavelength-dependent plasma opacities to assist inertial confinement fusion, astrophysics, and atomic physics research. There are several potential benefits to using z-pinch radiation for opacity measurements, including relatively large cm-scale lateral sample sizes and relatively-long 3-5 ns experiment durations. These features enhance sample uniformity. The spectrally resolved transmission through a CH-tamped NaBr foil was measured. The z-pinch produced the X-rays for both the heating source and backlight source. The (50±4) eV foil electron temperature and (3±1)x10 21 cm -3 foil electron density were determined by analysis of the Na absorption features. LTE and NLTE opacity model calculations of the n=2 to 3, 4 transitions in bromine ionized into the M-shell are in reasonably good agreement with the data

  3. Mineralogia de um latossolo vermelho distrófico submetido a diferentes manejos por 24 anos Mineralogy of a red latosol under different management systems for twenty-four years

    Directory of Open Access Journals (Sweden)

    Daniele Gonçalves

    2008-12-01

    Full Text Available Atualmente, procuram-se sistemas de manejo que preservem ou melhorem as qualidades do solo, tanto mineralógicas como orgânicas, priorizando maior produtividade. Este trabalho teve como objetivo verificar qualitativamente, por meio das técnicas de fluorescência de raios X, difração de raios X e infravermelho com transformada de Fourier, os efeitos provocados pela utilização dos manejos: plantio convencional, preparo mínimo e plantio direto, por 24 anos, na mineralogia de um Latossolo Vermelho distrófico de Ponta Grossa, PR. Não foram observadas mudanças significativas na mineralogia do Latossolo estudado, por meio das técnicas utilizadas, quanto aos diferentes manejos durante os anos de sua aplicação. Pôde-se verificar, qualitativamente, a presença dos minerais gibbsita, caulinita, haloisita, montmorilonita, hematita, rutilo, anatásio, goethita e quartzo.The search for management systems that preserve or improve soil qualities, the mineralogical as well as the organic composition, with a view to higher yields, is becoming more and more intense. The objective this study was to qualitatively verify the mineralogical effects of different management types: conventional , minimum and no-tillage for 24 years on a Red Latosol in Ponta Grossa, PR, Brazil, by the following techniques: X-ray diffraction, X-ray fluorescence and Fourier transform infrared. No significant changes in the mineralogy of the Red Latosol were observed by the techniques applied, as a result of the different management types. It was however possible to qualitatively verify the presence of the following minerals: gibbsite, kaolinite, halloysite, montmorillonite, hematite, rutile, anatase, goethite and quartz.

  4. Influência dos cátions lítio (Li + , sódio (Na + e potássio (K + na reologia de bentonitas brasileiras para uso em fluidos de perfuração base aquosa

    Directory of Open Access Journals (Sweden)

    I. A. da Silva

    Full Text Available Resumo Os cátions lítio (Li+, sódio (Na+ e potássio (K+ encontram-se em primeiro lugar no plano de seletividade para a obtenção de bentonitas monocatiônicas a partir das policatiônicas, influenciando de forma específica o comportamento reológico dos fluidos de perfuração base água. O objetivo deste trabalho foi estudar a influência do Li+, Na+ e K+ na reologia de bentonitas do estado da Paraíba, Brasil, para uso em fluidos de perfuração à base de água. Os novos depósitos de bentonitas brasileiras foram comparados com base nas suas características químicas, físicas, mineralógicas, propriedades reológicas e de filtração. As amostras de bentonitas foram caracterizadas por meio da composição química através do método clássico, capacidade de troca de cátions, análise granulométrica por difração a laser, difração de raios X e análises térmicas. A reologia das dispersões foi estudada e determinadas as viscosidades aparente, viscosidade plástica e limite de escoamento com base nas normas da API e Petrobras, além dos estudos de inchamento em água e filtrado. Os resultados mostraram uma melhora significativa nas propriedades reológicas e de filtração das dispersões após a aditivação com os carbonatos de lítio e de sódio, nessa ordem, havendo presença de tixotropia nas curvas de fluxo das dispersões de argilas estudadas.

  5. Importância das interações cultivares x locais e cultivares x anos na avaliação de milho na safrinha

    Directory of Open Access Journals (Sweden)

    Flávia Maria Avelar Gonçalves

    1999-07-01

    Full Text Available Com o objetivo de verificar a importância da interação cultivares x locais e cultivares x anos e de identificar entre os híbridos já disponíveis os que sejam mais adaptados e estáveis para o cultivo em safrinha, foram estimados os parâmetros de adaptabilidade e estabilidade a partir de dados obtidos em experimentos de avaliação de cultivares de milho na safrinha, nos anos de 1993, 1994 e 1995. Esses experimentos foram conduzidos nos Estados de São Paulo, Goiás e Paraná. O delineamento utilizado foi em blocos casualizados com três repetições. Constatou-se que a magnitude da variância da interação cultivares com anos dentro de locais foi mais expressiva do que entre locais, o que indica a necessidade de que as avaliações de cultivares na safrinha sejam realizadas num maior número de anos. As cultivares diferiram quanto à adaptabilidade e estabilidade de produção de grãos. Os materiais que se destacaram como mais adaptados e estáveis foram o híbrido simples Zeneca 8452, o híbrido triplo C 805 e o híbrido duplo Agromen 2012. Já os híbridos duplos BR 201, Planagri 411, AG 303 e C 125 foram os que mostraram menor adaptação e maior instabilidade.

  6. Mesoscopic phase separation in Na .sub.x./sub.CoO.sub.2./sub. (0.65<x<0.75)

    Czech Academy of Sciences Publication Activity Database

    Carretta, P.; Mariani, M.; Azzoni, C. B.; Mozzati, M. C.; Bradarič, I.; Savič, I.; Feher, A.; Šebek, Josef

    2004-01-01

    Roč. 70, č. 2 (2004), 024409/1-024409/9 ISSN 0163-1829 R&D Projects: GA ČR GA202/03/0550 Institutional research plan: CEZ:AV0Z1010914 Keywords : NMR * magnetization measurements * Na x CoO 2 * EPR Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.075, year: 2004

  7. Disponibilidade de cálcio do leite de búfala irradiado por raios gama
    Calcium availability of buffalo milk irradiated by gamma rays

    Directory of Open Access Journals (Sweden)

    R. C. DALLA DEA

    2010-11-01

    Full Text Available

    O leite de búfala é composto por elevados teores de nutrientes, sendo importante, principalmente, como matéria-prima para elaboração de produtos lácteos e fonte de proteínas e cálcio. O presente trabalho teve por objetivo estudar o efeito dos raios gama na disponibilidade de cálcio no leite de búfala. O leite integral foi irradiado nas doses 0,25; 0,50; 0,75 e 1,0 kGy e também foi avaliado o controle, que não foi submetido ao processo de irradiação. Foram avaliadas composição centesimal e teor de cálcio total no primeiro dia para caracterização do leite utilizado. As análises de diálise de cálcio in vitro ocorreram no primeiro, terceiro, sexto e nono dias de armazenamento a 4ºC. Como resultados para a composição centesimal foram obtidos valores de 4,85% de proteína, 7,00% de gordura, 0,79% cinza e 4,45% carboidratos. O teor de cálcio foi 212,43mg/100mL. A irradiação do leite não alterou a disponibilidade de cálcio.

  8. Physical and catalytic characterization of smectites from Boa-Vista, Paraíba, Brazil Caracterização física e catalítica de esmectitas de Boa Vista, Paraíba, Brasil

    Directory of Open Access Journals (Sweden)

    M. G. F. Rodrigues

    2003-09-01

    Full Text Available The original crystalline structure of clay minerals can be altered in a controlled way, through acid or thermal treatments, resulting then in suitable products to be used as catalysts. This paper aims to characterize the red smectite clays of Boa-Vista, Paraíba (Brazil in their natural form, and after chemical, thermal and acid treatments by X-ray fluorescence, differential thermal analysis, dynamic X-ray diffraction, classic X-ray diffraction analysis, scanning electron microscopy, nitrogen adsorption and model reaction. The results show that acid treatment partially altered the structure of the montimorillonite. An important increase in the surface area of the solid obtained was observed. The obtained reaction for the treated material showed that the clay was more acid than the natural one, yielding a better catalytic activity.A estrutura cristalina original dos argilominerais pode ser alterada de um modo controlado através de tratamentos ácidos ou tratamentos químicos, resultando em produtos satisfatórios para serem usados como catalisadores. O objetivo deste trabalho é caracterizar a argila esmectítica vermelha de Boa-Vista, Paraíba (Brasil na sua forma natural e após tratamentos químicos e térmicos. Os métodos usados foram fluorescência de raios X, análise térmica diferencial, difração de raios X, microscopia eletrônica de varredura, adsorção física de nitrogênio e reação modelo. Os resultados mostram que o tratamento ácido alterou parcialmente a estrutura da montmorilonita. Foi observado um importante aumento na área específica do sólido obtido. A reação obtida para o material tratado mostrou que a argila foi mais ácida que a natural conduzindo a uma melhor atividade catalítica.

  9. Electron magnetic resonance study of monovalent Na doping in Pr0.6Sr0.4−xNaxMnO3 manganites

    International Nuclear Information System (INIS)

    Thaljaoui, Rachid; Boujelben, Wahiba; Pękała, Marek; Szydłowska, Jadwiga; Cheikhrouhou, Abdelwaheb

    2012-01-01

    Highlights: ► New monovalent doped manganites Pr 0.6 Sr 0.4−x Na x MnO 3 (x = 0, 0.05). ► Comparison of electron magnetic resonance spectra in ferro- and paramagnetic phases. ► Double exchange interactions weakened by Na doping as indicated by activation energy. ► Magnetic susceptibility derived from resonance intensity obeys Curie–Weiss law. - Abstract: Effect of monovalent Na doping on the magnetic properties is studied in Pr 0.6 Sr 0.4−x Na x MnO 3 system (x = 0, 0.05) using X-band electron magnetic resonance and magnetization measurements. Temperature variation of magnetic resonance spectra of doped and undoped manganites is analyzed for paramagnetic and ferromagnetic states and compared to similar systems. In paramagnetic phase the magnetic susceptibility proportional to resonance signal intensity is found to obey the Curie–Weiss law. The effective magnetic moment becomes smaller in doped manganite. The paramagnetic Curie temperature derived from signal intensity equals to 312 and 306 K for the undoped and doped manganites, respectively, and is close to values obtained from magnetization variation in paramagnetic phase. The activation energy determined using the adiabatic small polaron hopping model is higher for the undoped than the doped manganite, which proves that the Na doping slightly reduces the Mn 3+ /Mn 4+ double exchange interactions.

  10. Obtenção de nanocompósitos condutores de montmorilonita/polipirrol: efeito da incorporação do surfactante na estrutura e propriedades

    Directory of Open Access Journals (Sweden)

    Sílvia Daniela Araújo da Silva Ramôa

    2014-01-01

    Full Text Available Nanocompósitos de montmorilonita/polipirrol (MMT/PPy foram preparados a partir da polimerização in situ do pirrol na presença de argila, bentonita sódica natural, (MMT-Na+ em solução aquosa com ou sem surfactante aniônico, dodecil sulfato de sódio (SDS, utilizando-se o cloreto de ferro (III hexahidratado (FeCl3.6H2O, como oxidante. A estrutura e propriedades dos nanocompósitos obtidos pela polimerização in situ do pirrol na presença de SDS (MMT/PPy.SDS e sem surfactante (MMT/PPy foram avaliadas e comparadas a partir da espectroscopia de infravermelho com transformada de Fourier (FTIR, difração de raios X (DRX, microscopia eletrônica de varredura (MEV, microscopia eletrônica de transmissão (MET, análise termogravimétrica (TG e método padrão quatro pontas. Os difratogramas dos nanocompósitos revelaram que o espaçamento basal d001 da MMT (1,42 nm foi alterado para valores maiores, indicando a intercalação do PPy na MMT para ambos os nanocompósitos obtidos. Os difratogramas e as imagens de MET e MEV dos nanocompósitos de MMT/PPy.SDS confirmaram que a presença do SDS na reação promoveu, além da intercalação, esfoliação parcial da argila. Os nanocompósitos MMT/PPy.SDS apresentaram condutividade elétrica (9,50 S/cm maior do que o nanocompósito de MMT/PPy (4,44 S/cm. A presença da argila melhorou de forma significativa a estabilidade térmica do PPy.

  11. Ruído emitido por conjunto trator-carreta cafeeira em função da rotação, do raio de afastamento, da velocidade e do tipo de pista

    Directory of Open Access Journals (Sweden)

    Paulo da Silva Lima Júnior

    2014-07-01

    Full Text Available Apesar dos benefícios, o uso de máquinas expõe, muitas vezes, o operador a níveis elevados de ruído e desta forma pode gerar problemas no sistema auditivo. O objetivo da pesquisa foi avaliar o nível de ruído emitido por conjunto mecanizado utilizado na operação de transporte de grãos de café (Coffea arabica L.. As análises foram realizadas numa propriedade na cidade de Romaria – MG. Na condição estática foi avaliado o nível de ruído em função da rotação do motor e do raio de afastamento considerando as posições (direita, esquerda, anterior e posterior na distância de zero a 10 m. Na condição dinâmica foi avaliado o nível de ruído emitido pelo conjunto trator-carreta em função dos fatores pista e marchas de trabalho. Foi utilizado o delineamento inteiramente casualizado, e quando significativo no teste de F os dados foram submetidos ao teste de Tukey a 5% de probabilidade para comparação de médias, a análise de regressão quando foi significativo o fator quantitativo (distâncias e marchas e a geoestatística para a verificar a propagação do ruído. Os resultados mostraram que os níveis de ruído no trator aumentam conforme aumenta à rotação do motor, e os maiores níveis de ruído foram na posição direita do trator. À medida que se afasta do posto de operação, os níveis de ruído vão reduzindo. O conjunto trator-carreta apresentou maiores riscos à audição na segunda, terceira e quarta marcha reduzida, respectivamente. Não houve diferença nos níveis de ruído em relação às pistas de asfalto e terra batida.

  12. Electrical Conductivity of Cancrinite-Type Na8 - 2 x Ca x [Al6Si6O24][CO3] · 2H2O ( x ≤ 0.03) Crystals

    Science.gov (United States)

    Sorokin, N. I.

    2018-05-01

    The electrical conductivity of crystals of artificial cancrinite Na8 - 2 x Ca x [Al6Si6O24][CO3] · 2H2O ( x ≤ 0.03) has been studied in the temperature range of 498-604 K. These crystals were grown by hydrothermal synthesis on a seed in the Na2O-Al2O3-SiO2-H2O system ( t = 380-420°C, P = 3 × 107-9 × 107 Pa). The ionic conductivity of a single-crystal sample (sp. gr. P63), measured along the crystallographic axis c, is low: σ = 8 × 10-7 S/cm at 300°C. The electric transport activation energy is E a = 0.81 ± 0.05 eV. The relationship between the ionic conductivity and specific features of the atomic structure of cancrinites is discussed.

  13. Separation of molecular hydrogen isotope mixtures on zeolite NaX-3M

    International Nuclear Information System (INIS)

    Polevoj, A.S.; Yudin, I.P.

    1984-01-01

    The transfer unito height (TUH) have been determined at separation of the H 2 -D 2 mixture using zeolite NaX-3M depending on temperature and linear gas flow rate in the column. Experimentally the TUH value has been determined by the method of stepped variation of the concentration of one of the separated components at the entrance into the column and measurement of the substance front wash-out at the outlet. The results of determining TUH in the column of 10 mm diameter filled by the zeolite immobile layer with granules of 2-3 mm size show that with increasing the temperature from 77 K to 87.3 K TUH decreases while at constant temperature it increases with the growth of linear gas flow rate. The mentioned above circumstances testify to the essential contribution to the TUH value of the hydrogen diffusion process in the sorbent grain. The given TUH absolute values indicate the high rate of interphase isotope exchange at separation of the H 2 -D 2 mixture using NaX-3M zeolite

  14. A produção de Serapilheira em uma Floresta Estacional Decidual na Região do Pontal-MG

    Directory of Open Access Journals (Sweden)

    Nicolas Fernandes Martins

    2012-12-01

    Full Text Available Durante o período de um ano, foram avaliadas a quantidade de serapilheira depositada e a sazonalidade de sua queda em um ecossistema de Floresta Estacional Decidual, próximo ao município de Ituiutaba-MG. . Para o estudo foram utilizados 20 coletores de madeira e de formato quadrado e circular, tendo 50 por 50 cm de largura, sendo o chamado de EG, os de 25 por 25 cm chamados de G formato quadrados sendo os circulares de 15 cm de raio chamados de M e os de 9 cm de raio denominados de P. Foram distribuídos de maneira aleatória numa reserva permanente. O material depositado foi coletado mensalmente, separado em diferentes frações, secado em uma estufa e posteriormente pesado. O trabalho fora desenvolvido na fazenda Três Irmãos, localizado a 20 km do Município de Ituiutaba (sentido a Uberlândia na BR-365. Dessa forma este estudo teve por objetivos quantificar a produção anual de serapilheira e correlações com as variáveis climáticas. O principal componente da serrapilheira fora as folhas, e os meses maiores totais de deposição da serapilheira ocorreram nos meses de novembro e dezembro diferentes de muitos trabalhos na literatura. O total de serapilheira registrada em todos os coletores foi de 8975 kg.ha-1 e no coletor EG onde a amostragem dos dados foram melhores obtivemos um decorrência de serrapilheira num total 4101 kg.ha-1, sendo 2611 kg.ha-1 (63,66% de folhas, 704 kg.ha-1 (17,16 % de caule, 453 kg.ha-1 (11,04 % de frutos e 333 kg.ha-1 (8,12% de material indiferenciado. A precipitação pluviométrica não fora o fator principal para a queda das folhas, devido a floresta estacional ter passado por uma perturbação não compreendida pelo estudo. O melhores resultados foram referentes a temperatura, quando ouve uma elevação na temperatura tivemos maior produção de serapilheira.

  15. The Effects of the Addition of Silica Mol Fraction (x = 1.5; 2; 2.5) as a Solid Electrolyte on Ion Conductivity of NASICON (Na1-xZr2SixP3-xO12) Using Solid-State Method

    Science.gov (United States)

    Pratiwi, V. M.; Purwaningsih, H.; Widyastuti; Fajarin, R.; Setyawan, H.

    2017-05-01

    Energy is a very important in modern life and need innovations to develop it. One innovation is the application of energyfor storage devices, such as batteries, capacitors, fuel cells, etc. For 30 years, the application of the NASICON (Na1+xZr2SixP3-xO12) into the NASICON gas sensor material was successfully prepared by using solid-state method. The raw materials such as SiO2, Na2CO3, ZrO2, and NaH2PO4 with a little methanol were mixed in Ballmill equipment. The silica powder was made by the extraction of bagasse ash by using sol-gel method. The x-ray diffraction patternshowedthat the result of silica extraction was amorphous and the NASICON structure wassynthesizedto bemonoclinic. The scanning electron microscopy results indicated that silica had non-uniform surface morphology and the NASICON had good surface morphology only on the form of Na3Zr2Si2PO12. The ionic conductivty of NASICON wasshown on LCR Nyquist plot of the three compositions. The highest NASICON conductivity was found inthe composition of x = 2.0, i.e. 1.142x10-8 S/m.

  16. Synthesis and characterization of NaCo(1-x)MnxO2 solid electrolyte using sol-gel method: the effect of milling speed variations

    Science.gov (United States)

    Suyati, L.; Widyayanti, O. A.; Qushoyyi, M.; Darmawan, A.; Nuryanto, R.

    2018-04-01

    Battery is a device that converts chemical energy into electrical energy through electrochemical process. Further research on the synthesis of cathode of Na-ion battery that has good conductivity to maximize the battery performance needs to be conducted. One of the production steps of the NaCo(1-x)NaCo cathode synthesis in the Na-Ion battery was a ball-milling process, in which by the ball-milling process, the crystal size of NaCo(1-x)MnxO2 cathode can be minimized. The purpose of this study was to determine the effect of variation of ball-milling speed to the characteristics of resulting product including the oxide types composing NaCo(1-x)MnxO2 cathode, surface morphology, and conductivity. The main ingredients used were sodium acetate, manganese acetate, cobalt acetate with molar ratio of 0.7: 0.66: 0.22, respectively and citric acid as chelating agent with the M/CA ratio of 1: 1. The variations of milling speed were 0, 300, 400, 500, 600 and 700 rpm. Characterization of the product was conducted using XRD, SEM-EDS, and conductivity meter (LCR-meter). The result showed that a solid electrolyte of NaCo(1-x)MnxO2 consisting of NaMnO2, NaO2, CoO, Co2O3, MnO2 components was successfully synthesized. The observation on the milling speed at 400 rpm showed that the solid electrolyte produced had the highest conductivity i.e. 4.08 x 10-6 Scm-1 with a homogeneous surface morphology and had a spinel formula NaCo0,65Mn0,35O2.

  17. Reaproveitamento de resíduo sólido proveniente do setor siderúrgico em cerâmica vermelha

    OpenAIRE

    Oliveira,G. E.; Holanda,J. N. F.

    2004-01-01

    Este trabalho mostra os resultados de um estudo sobre a incorporação de resíduo sólido proveniente do setor siderúrgico na formulação de uma massa argilosa utilizada na fabricação de cerâmica vermelha. As massas preparadas continham os seguintes teores de resíduo de siderurgia: 0; 0,5; 1,0; 1,5; 2,0; 2,5 e 3,0% em peso. Os resultados de difração de raios X, distribuição de tamanho de partículas e limites de Atterberg são apresentados para as massas argilosas. Os corpos-de-prova foram conforma...

  18. Anomalous Pd substitution effects in the thermoelectric oxide NaCo sub 2 sub - sub x Pd sub x O sub 4

    CERN Document Server

    Kitawaki, R

    2002-01-01

    We prepared a set of polycrystalline samples of the thermoelectric oxide NaCo sub 2 sub - sub x Pd sub x O sub 4 (x = 0, 0.05, 0.1, and 0.2), and investigated the Pd substitution effects on transport phenomena. The effects are so drastic that just 5-10% Pd ions reduce the resistivity and the Seebeck coefficient to one third of the values for x = 0, and increase the magnitude of the Hall coefficient by three times. A semi-quantitative analysis has revealed that the x = 0.2 sample has much smaller effective mass and carrier concentration than the x = 0.05 sample. This is difficult to explain within a rigid-band picture, and is qualitatively consistent with a strong-correlation picture applied to the Ce-based heavy-fermion systems.

  19. O PAPEL DA MULHER NA LUTA PELA TERRA. UMA QUESTÃO DE GÊNERO E/OU CLASSE?

    Directory of Open Access Journals (Sweden)

    Renata Cristiane Valenciano

    2011-11-01

    Full Text Available Pretendemos neste projeto de pesquisa, compreender a inserção e ação da mulher na luta pela terra, e priorizar a especificidade do embate existente entre as três dimensões que a mulher internaliza: enquanto provedora da força de trabalho e da família. Enquanto trabalhadora, no cotidiano da lavra, e na militância política. Mais especificamente põe-se a apreender as manifestações específicas que as mulheres estão apresentando, no raio organizativo do MST, através dos Coletivos de Gênero, das decisões e propostas de trabalho deliberadas, bem como seus desdobramentos, sendo que os Coletivos de Gênero ganham em abrangência e magnitude, tendo em vista privilegiar nas pautas de discussões, não somente a questão da exploração da mulher trabalhadora, os preconceitos, a violência, mas, sobretudo a emancipação de classe.

  20. Populações de aranhas errantes do gênero Ctenus em fragmentos florestais na Amazônia Central Populations of Ctenus wandering spiders in Amazonian forest fragments

    Directory of Open Access Journals (Sweden)

    Luiz Augusto Macedo Mestre

    2008-01-01

    Full Text Available Ctenus é um gênero de aranhas errantes abundante em florestas tropicais da América do Sul e da África e está se tornando um organismo modelo para compreensão da biologia de predadores na fauna de serapilheira. Avaliamos os efeitos da fragmentação florestal sobre quatro espécies de aranhas errantes do gênero Ctenus (C. amphora, C. crulsi, C. manauara e C. villasboasi, baseado nas variações das densidades e nos tamanhos de adultos em fragmentos de tamanhos diferentes, nas bordas destes e nas florestas secundárias próximas. Este estudo foi realizado de fevereiro a julho de 1999, em floresta tropical úmida de terra firme ao norte de Manaus - AM. As áreas incluíram três locais de mata secundária, quatro fragmentos de 1 ha, três de 10 ha, dois de 100 ha e quatro reservas em floresta contínua (maior que 10.000 ha. As aranhas foram capturadas manualmente, mensuradas e contadas em transectos de 250x5 m ou 500x5 m em áreas de platô, no interior e nas bordas dos fragmentos. Houve predomínio significativo de fêmeas em duas espécies (C. amphora- 74% e C. crulsi- 65%; dimorfismo sexual de tamanho em três espécies (C. amphora, C. crulsi e C. manauara e variação temporal da abundância significativa para as quatro espécies. Estes resultados corroboraram e complementaram tendências de estudos anteriores e permitem uma interpretação mais completa sobre a ecologia destas espécies. Não observamos diferenças de abundância das aranhas entre centro e bordas e entre reservas de diferentes tamanhos. O efeito de borda ou do tamanho do fragmento sobre o tamanho de aranhas Ctenus neste estudo foi bem menor que as variações anteriormente observadas entre habitats diferentes no interior da floresta. Comparações com um estudo posterior a este, mostram que efeito da fragmentação nesta escala sobre estas aranhas diminui com a regeneração da floresta ao redor dos fragmentos, indicando uma rápida resposta do grupo para estas modifica

  1. Crystal phase transition in LixNa1-xGdF4 solid solution nanocrystals - Tuning of optical properties

    KAUST Repository

    Bański, Mateusz

    2014-01-01

    The influence of precursor composition on the crystallization of LixNa1-xGdF4 is investigated and discussed. Nanocrystals are prepared from the thermal decomposition of trifluoroacetates in the presence of trioctylphosphine oxide to provide control over particle size. A crystal phase transition from hexagonal to cubic and to tetragonal is observed by increasing lithium trifluoroacetate (Li-TFA) in the solution. Controlling the composition of LixNa1-xGdF4 nanocrystals results in modified crystal field symmetry and emission properties from doped europium (Eu3+) ions. We report that for lithium (Li+) substitution <15%, the hexagonal crystal field is preferred, while the Eu3+ emission is already tuned, whereas at higher Li+ substitution, a phase change takes place and the number of crystalline matrix defects increases which is reflected in the optical properties of Eu3+. From Eu3+ emission properties, the optimum Li+ content is determined to be ∼6.2% in the prepared LixNa1-xGdF4 nanocrystals.

  2. Effect of chloride substitution on the order–disorder transition in NaBH4 and Na11BD4

    International Nuclear Information System (INIS)

    Olsen, Jørn Eirik; Karen, Pavel; Sørby, Magnus H.; Hauback, Bjørn C.

    2014-01-01

    Graphical abstract: Interactions that order the BD 4 - tetrahedra below the order–disorder transition became increasingly frustrated by the solute in the Na( 11 BD 4 ) 1−x Cl x solid solutions, and the order disappears at x = 0.158. Highlights: • The order–disorder transition temperature for Na(BH 4 ) 1−x Cl x and Na( 11 BD 4 ) 1−x Cl x is highly dependent on the Cl-content, x. • The transition is characterized by DSC for Na( 11 BD 4 ) 1−x Cl x for x = 0, 0.10 and 0.15. • No transition is observed for x ⩾ 0.20 on cooling to 8 K. • The crystal structures are reported for Na 11 BD 4 at room temperature and 8 K and Na( 11 BD 4 ) 1−x Cl x (x = 0.10, 0.15, 0.20 and 0.25) at 8 K from powder neutron diffraction. -- Abstract: Phase transition associated with anion disordering over two orientations in Na 11 BD 4 (NaBH 4 ) and its solid solutions with NaCl, Na( 11 BD 4 ) 1−x Cl x , is investigated with powder diffraction (neutron and synchrotron radiation), differential scanning calorimetry and Raman spectroscopy. Upon heating, the transition temperature extrapolated to zero rate of heating is 192.2 K for Na 11 BD 4 , ΔS = 4.41 J/mol K, hysteresis 1.7 K and the volume increase 0.43%. Thermal parameters of the transition in Na( 11 BD 4 ) 1−x Cl x follow a colligative-property model of an ideal solution, with x = 0.158(1) as the critical concentration at which the ordering interactions and the transition itself are eliminated. On approaching this limit, the tetragonal distortion of the ordered structure decreases somewhat towards the cubic average, and this is associated with a partial disorder of the tetrahedral anions seen by diffraction methods. In fact, a 3% disorder is already present in the pure solvent of the solid solution (Na 11 BD 4 ) at 8 K

  3. Microfocus x-ray imaging of traceable pointlike {sup 22}Na sources for quality control

    Energy Technology Data Exchange (ETDEWEB)

    Hasegawa, T.; Oda, K.; Sato, Y.; Ito, H.; Masuda, S.; Yamada, T.; Matsumoto, M.; Murayama, H.; Takei, H. [Allied Health Sciences, Kitasato University Kitasato 1-15-1, Minami-ku, Sagamihara-shi, Kanagawa 252-0373 (Japan); Positron Medical Center, Tokyo Metropolitan Institute of Gerontology Sakaecho 35-2, Itabashi-ku, Tokyo 173-0015 (Japan); Advanced Industrial Science and Technology (AIST) Central 2, Umezono 1-1-1, Tsukuba-shi, Ibaraki 305-8568 (Japan); Kanagawa Industrial Technology Center (KITC) Shimoimazumi 705-1, Ebina-shi, Kanagawa 243-0435 (Japan); Japan Radioisotope Association (JRIA) Komagome 2-28-45, Bunkyo-ku, Tokyo 113-8941 (Japan); Molecular Imaging Center, National Institute of Radiological Sciences Anagawa 4-9-1, Inage, Chiba 263-8555 (Japan); Graduate School of Medical Sciences, Kitasato University Kitasato 1-15-1, Minami-ku, Sagamihara-shi, Kanagawa 252-0373 (Japan)

    2012-07-15

    Purpose: The purpose of this study is to propose a microfocus x-ray imaging technique for observing the internal structure of small radioactive sources and evaluating geometrical errors quantitatively, and to apply this technique to traceable pointlike {sup 22}Na sources, which were designed for positron emission tomography calibration, for the purpose of quality control of the pointlike sources. Methods: A microfocus x-ray imaging system with a focus size of 0.001 mm was used to obtain projection x-ray images and x-ray CT images of five pointlike source samples, which were manufactured during 2009-2012. The obtained projection and tomographic images were used to observe the internal structure and evaluate geometrical errors quantitatively. Monte Carlo simulation was used to evaluate the effect of possible geometrical errors on the intensity and uniformity of 0.511 MeV annihilation photon pairs emitted from the sources. Results: Geometrical errors were evaluated with sufficient precision using projection x-ray images. CT images were used for observing the internal structure intuitively. As a result, four of the five examined samples were within the tolerance to maintain the total uncertainty below {+-}0.5%, given the source radioactivity; however, one sample was found to be defective. Conclusions: This quality control procedure is crucial and offers an important basis for using the pointlike {sup 22}Na source as a basic calibration tool. The microfocus x-ray imaging approach is a promising technique for visual and quantitative evaluation of the internal geometry of small radioactive sources.

  4. Relação anatômica do nervo supraescapular com o processo coracoide, articulação acromioclavicular e acrômio Anatomical relationship of the suprascapular nerve to the coracoid process, acromio clavicular joint and acromion

    Directory of Open Access Journals (Sweden)

    Bernardo Barcellos Terra

    2010-06-01

    Full Text Available OBJETIVO: Estabelecer a relação anatômica do nervo supraescapular (NSE localizado na fossa supraescapular com a borda medial da base do coracoide, face articular acromial da articulação acromioclavicular e a borda anterolateral do acrômio. MÉTODOS: Foram dissecados 16 ombros de 16 cadáveres, sendo nove masculinos e sete femininos, mensurando com auxílio do paquímetro a distância do nervo supraescapular (na sua passagem sob o ligamento transverso com pontos fixos determinados na borda medial da base do processo coracoide, na face articular do acrômio da articulação acromioclavicular e na borda anterolateral do acrômio, correlacionando com a idade e o sexo. Foram excluídos cadáveres com intervenção cirúrgica prévia. RESULTADOS: Com relação à medida do nervo supraescapular, na sua fossa à borda medial da base do processo coracoide, obtivemos uma média de 3,9cm (variando de 3,1cm a 5,2cm; com relação à articulação acromioclavicular, a média foi de 4,7 (3,9cm a 5,2cm; e, com relação à borda anterolateral do acrômio, a média foi de 6,1cm (5,7cm a 6,8cm. CONCLUSÃO: É fundamental o conhecimento exato da anatomia dos nervos da região anterior do ombro para evitar lesões iatrogênicas e para conseguir resultados satisfatórios no tratamento cirúrgico das doenças do ombro, seja ele realizado de forma aberta ou artroscópica.OBJECTIVE: To establish the anatomic relationship of the suprascapular nerve (SSN located in the suprascapular notch to the medial border of the base of the coracoid process, the medial acromial surface of the acromioclavicular joint and the anterolateral edge of the acromion. METHODS: We dissected 16 shoulders of 16 cadavers, 9 males and 7 females. The distance from the suprascapular nerve (in its course beneath the transverse ligament to certain fixed points in the medial base of the coracoid process was measured with the aid of a caliper, as well as to the articular surface of the acromion

  5. Solubility of NaNd(CO3)2.6H2O(c) in concentrated Na2CO3 and NaHCO3 solutions

    International Nuclear Information System (INIS)

    Rao, L.; Rai, D.; Felmy, A.R.; Fulton, R.W.; Novak, C.F.

    1996-01-01

    NaNd(CO 3 ) 2 x 6 H 2 O(c) was identified to be the final equilibrium solid phase in suspensions containing concentrated sodium carbonate (0.1 to 2.0 M) and sodium bicarbonate (0.1 to 1.0 M), with either NaNd(CO 3 ) 2 x 6 H 2 O(c) or Nd 2 (CO 3 ) 3 x xH 2 O(s) as initial solids. A thermodynamic model, based on Pitzer's specific into-interaction approach, was developed to interpret the solubility of NaNd(CO 3 ) 2 x 6 H 2 O(c) as functions of sodium carbonate and sodium bicarbonate concentrations. In this model, the solubility data of NaNd(CO 3 ) 2 x 6 H 2 O(c) were explained by assuming the formation of NdCO 3 + , Nd(CO 3 ) 2 - and Nd(CO 3 ) 3 3- species and invoking the specific ion interactions between Na + and Nd(CO 3 ) 3 3- . Ion interaction parameters for Na + -Nd(CO 3 ) 3 3- were developed to fit the solubility data. Based on the model calculations, Nd(CO 3 ) 3 3- was the predominant aqueous neodymium species in 0.1 to 2 M sodium carbonate and 0.1 to 1 M sodium bicarbonate solutions. The logarithm of the NaNd(CO 3 ) 2 x 6 H 2 O solubility product (NaNd(CO 3 ) 2 x 6 H 2 O(c)=Na + +Nd 3+ +2 CO 3 2- +6 H 2 O) was calculated to be -21.39. This model also provided satisfactory interpretation of the solubility data of the analogous Am(III) system in less concentrated carbonate and bicarbonate solutions. (orig.)

  6. Membranas poliméricas de PE-g-MA-Al/AlPO4 impregnado com Fe, Al - utilização na recuperação de efluentes de galvanoplastia

    Directory of Open Access Journals (Sweden)

    Joice Andrade de Araújo

    2014-01-01

    Full Text Available Neste trabalho foram desenvolvidas membranas filtrantes de materiais híbridos de polietileno de alta densidade modificado com anidrido maleico e ionizado com hidróxido de alumínio (PE-g-MA-Al (matriz orgânica e fosfato de alumínio amorfo puro (AlPO4 ou impregnado com ferro e/ou alumínio (fase dispersa inorgânica. Essas membranas foram obtidas nas composições de PE-g-MA-Al (M1, PE-g-MA-Al/AlPO4 (M2, PE-g-MA-Al/AlPO4-Al (M3, PE-g-MA-Al/AlPO4-Fe (M4 e PE-g-MA-Al/AlPO4-Fe,Al (M5, na proporção de 97/3% em massa, pelo método de "casting", usando xileno à quente e sob refluxo, como solvente. As técnicas de espectroscopia na região do infravermelho (FTIR, difração de raios X (DRX, análise termogravimétrica (TGA, análise textural, tensão superficial e microscopia eletrônica de varredura (MEV serviram para comprovar a influência da natureza dos materiais e da metodologia usada na confecção das membranas na incorporação da fase inorgânica na matriz polimérica e nas propriedades dos materiais híbridos resultantes. A aplicação das membranas na recuperação de metais presentes no efluente de galvanoplastia mostrou que a presença do ferro e/ou alumínio influenciou na morfologia e nas propriedades texturais desses materiais, e consequentemente na utilização como membranas mesoporosas de ultrafiltração, com os melhores resultados apresentados por M1 e M3 na recuperação de ferro (32 e 35% e zinco (62 e 60%.

  7. Grazing incidence x-ray diffraction analysis of zeolite NaA membranes on porous alumina tubes.

    Science.gov (United States)

    Kyotani, Tomohiro

    2006-07-01

    Zeolite NaA-type membranes hydrothermally synthesized on porous alumina tubes, for dehydration process, were characterized by grazing incidence 2 theta scan X-ray diffraction analysis (GIXRD). The fine structure of the membrane was studied fractionally for surface layer and for materials embedded in the porous alumina tube. The thickness of the surface layer on the porous alumina tube in the membranes used in this study was approximately 2-3 microm as determined from transmission electron microscopy with focused ion beam thin-layer specimen preparation technique (FIB-TEM). To discuss the effects of the membrane surface morphology on the GIXRD measurements, CaA-type membrane prepared by ion exchange from the NaA-type membrane and surface-damaged NaA-type membrane prepared by water leaching were also studied. For the original NaA-type membrane, 2 theta scan GIXRD patterns could be clearly measured at X-ray incidence angles (alpha) ranging from 0.1 to 2.0 deg in increments of 0.1 deg. The surface layers of the 2 - 3 microm on the porous alumina tube correspond to the alpha values up to ca. 0.2 deg. For the CaA-type and the surface-damaged NaA-type membranes, however, diffraction patterns from the surface layer could not be successfully detected and the others were somewhat broad. For all the three samples, diffraction intensities of both zeolite and alumina increased with depth (X-ray incidence angle, alpha) in the porous alumina tube region. The depth profile analysis of the membranes based on the GIXRD first revealed that amount of zeolite crystal embedded in the porous alumina tube is much larger than that in the surface layer. Thus, the 2 theta scan GIXRD is a useful method to study zeolite crystal growth mechanism around (both inside and outside) the porous alumina support during hydrothermal synthesis and to study water permeation behavior in the dehydration process.

  8. Synthesis and Luminescence Properties of Blue Na(Sr0.97-xCa(x))PO4:0.03Eu2+ Phosphors for White Light Emitting Diode Applications.

    Science.gov (United States)

    Hakeem, D A; Park, K

    2015-07-01

    The crystal structure and luminescence properties of Na(Sr0.97-xCax)PO4:0.03Eu2+ (0 phosphors were studied, depending on the Ca2+ concentration. All the Na(Sr0.97-xCax)PO4:0.03Eu2+ phosphors had a hexagonal crystal structure. The excitation spectra of the prepared phosphors showed a broad band ranging from 250 to 420 nm, which arises due to the 4f-5d transitions of Eu2+ ions. Upon the excitation of 334 nm wavelength, the emission spectra showed a broad blue band ranging from 400 to 700 nm peaking at 450 nm. Among the prepared phosphors, the Na(Sr0.72Ca0.25)PO4:0.03Eu2+ showed the strongest emission intensity and could be applied as a blue emitting phosphor for UV-based w-LEDs.

  9. Reduction in sperm count and increase in abnormal sperm in the mouse following x-irradiation or injection of 22Na

    International Nuclear Information System (INIS)

    Harrison, A.; Moore, P.C.

    1980-01-01

    The accumulated reduction in sperm count and increase in the number of aberrant sperm in the mouse were used to compare acute X-irradiation with protracted radiation from an injection of 22 Na. The effects per unit of absorbed dose of acute and protracted radiation were similar on sperm count, but in respect of numbers of abnormal sperm the 22 Na induced a significantly greater maximum than X-rays. (author)

  10. A new global analytical potential energy surface of NaH2+ system and dynamical calculation for H(2S) + NaH+(X2Σ+) → Na+(1S) + H2(X1Σg+) reaction

    Science.gov (United States)

    Yuan, Meiling; Li, Wentao; Yuan, Jiuchuang

    2018-05-01

    A new global potential energy surface (PES) of the NaH2+ system is constructed by fitting 27,621 ab initio energy points with the neural network method. The root mean square error of the new PES is only 4.1609 × 10-4 eV. Based on the new PES, dynamical calculations have been performed using the time-dependent quantum wave packet method. These results are then compared with the H(2S) + LiH+(X2Σ+) → Li+(1S) + H2(X1Σg+) reaction. The direct abstract mechanism is found to play an important role in the reaction because only forward scattering signals on the differential cross section results for all calculated collision energies.

  11. Complex magnetic differentiation of cobalts in Na x CoO2 with 22 K Néel temperature

    Science.gov (United States)

    Mukhamedshin, I. R.; Gilmutdinov, I. F.; Salosin, M. A.; Alloul, H.

    2014-06-01

    Single crystals of sodium cobaltates Na x CoO2 with x ≈ 0.8 were grown by the floating zone technique. Using electrochemical Na de-intercalation method we reduced the sodium content in the as-grown crystals down to pure phase with 22 K Néel temperature and x ≈ 0.77. The 59Co NMR study in the paramagnetic state of the T N = 22 K phase permitted us to evidence that at least 6 Co sites are differentiated. They could be separated by their magnetic behavior into three types: a single site with cobalt close to non-magnetic Co3+, two sites with the most magnetic cobalts in the system, and the remaining three sites displaying an intermediate behavior. This unusual magnetic differentiation calls for more detailed NMR experiments on our well characterized samples.

  12. Exposição Humana a radiação Ionizante: Efeitos Biológicos e Impacto na Saúde

    OpenAIRE

    Silva, Maria João; Dias, Anabela; Monteiro-Gil, Octávia; Louro, Henriqueta; Boavida, Guida

    2013-01-01

    O homem encontra-se exposto a radiação ionizante de origem natural (raios cósmicos e radiação emanada dos solos) mas, alguns grupos populacionais, poderão ainda estar sujeitos a uma exposição em contexto ocupacional (e.g., médicos e trabalhadores de minas de urânio) ou ambiental (e.g., residentes em áreas de influência de minas de urânio). Estão bem documentados os efeitos nefastos da exposição a radiação ionizante na saúde humana incluindo, a longo prazo, um aumento da incidência de várias f...

  13. Diffusion coefficients of D2 and HT in the medium of gaseous protium and in crystals of NaX zeolite

    International Nuclear Information System (INIS)

    Polevoj, A.S.

    1993-01-01

    Coefficients of HT diffusion (absent in literature) in gaseous protium medium and in crystals of the NaX zeolite compared with similar values of these coefficients for deuterium are determined on the basis of analysis of experimental data on effect NaX zeolite grain size and of H 2 -HT gaseous mixture consumption in the sorption column at separation of hydrogen atoms on the value of transfer unit. 15 refs., 1 fig., 1 tab

  14. Influência da dependência energética de dosímetros termoluminescentes na medida da dose na entrada da pele em procedimentos radiográficos Influence of thermoluminescent dosimeters energy dependence on the measurement of entrance skin dose in radiographic procedures

    Directory of Open Access Journals (Sweden)

    Mércia Liane de Oliveira

    2010-04-01

    Full Text Available OBJETIVO: O objetivo do presente trabalho foi avaliar a influência da dependência energética de materiais termoluminescentes na determinação da dose na entrada da pele de pacientes submetidos a exames radiográficos (radiologia geral, mamografia e radiologia odontológica. MATERIAIS E MÉTODOS: Três diferentes materiais termoluminescentes foram utilizados: LiF:Mg,Ti, LiF:Mg,Cu,P e CaSO4:Dy. Estes materiais foram expostos a fontes padronizadas de radiação X e gama, e a feixes clínicos de raios X. RESULTADOS: As curvas de calibração e de dependência energética foram obtidas. Todos os materiais apresentaram resposta linear em função do kerma no ar. Com relação à dependência energética, as amostras de CaSO4:Dy e LiF:Mg,Ti mostraram maior variação da resposta termoluminescente em função da energia efetiva do feixe de radiação. CONCLUSÃO: Os materiais testados mostraram desempenho adequado para a detecção da radiação X em feixes padronizados e clínicos. Embora as amostras de CaSO4:Dy e LiF:Mg,Ti apresentem dependência energética significativa no intervalo de energia considerado, este materiais podem ser utilizados para medição da dose de entrada na pele se fatores de correção apropriados forem utilizados.OBJECTIVE: This study was aimed at evaluating the influence of the energy dependence of thermoluminescent materials on the determination of entrance skin dose in patients submitted to conventional radiographic studies (general radiology, mammography and dental radiology. MATERIALS AND METHODS: Three different thermoluminescent materials were utilized: LiF:Mg,Ti, LiF:Mg,Cu,P and CaSO4:Dy. These materials were exposed to standardized sources of X and gamma radiation and clinical X-ray beams. RESULTS: Calibration and energy dependence curves were obtained. All the materials showed a linear response as a function of the air kerma. As far as energy dependence is concerned, the CaSO4:Dy and LiF:Mg,Ti samples showed the

  15. Enhancing Catalyzed Decomposition of Na2CO3 with Co2MnO x Nanowire-Decorated Carbon Fibers for Advanced Na-CO2 Batteries.

    Science.gov (United States)

    Fang, Cong; Luo, Jianmin; Jin, Chengbin; Yuan, Huadong; Sheng, Ouwei; Huang, Hui; Gan, Yongping; Xia, Yang; Liang, Chu; Zhang, Jun; Zhang, Wenkui; Tao, Xinyong

    2018-05-23

    The metal-CO 2 batteries, especially Na-CO 2 , batteries come into sight owing to their high energy density, ability for CO 2 capture, and the abundance of sodium resource. Besides the sluggish electrochemical reactions at the gas cathodes and the instability of the electrolyte at a high voltage, the final discharge product Na 2 CO 3 is a solid and poor conductor of electricity, which may cause the high overpotential and poor cycle performance for the Na-CO 2 batteries. The promotion of decomposition of Na 2 CO 3 should be an efficient strategy to enhance the electrochemical performance. Here, we design a facile Na 2 CO 3 activation experiment to screen the efficient cathode catalyst for the Na-CO 2 batteries. It is found that the Co 2 MnO x nanowire-decorated carbon fibers (CMO@CF) can promote the Na 2 CO 3 decomposition at the lowest voltage among all these metal oxide-decorated carbon fiber structures. After assembling the Na-CO 2 batteries, the electrodes based on CMO@CF show lower overpotential and better cycling performance compared with the electrodes based on pristine carbon fibers and other metal oxide-modified carbon fibers. We believe this catalyst screening method and the freestanding structure of the CMO@CF electrode may provide an important reference for the development of advanced Na-CO 2 batteries.

  16. Preparação do sistema Fe2O3/ZSM-5 para uso como catalisador na reação foto-Fenton

    Directory of Open Access Journals (Sweden)

    J. S. de Oliveira

    Full Text Available Resumo Este trabalho objetivou a preparação da zeólita ZSM-5 suportada com nanopartículas de óxido de ferro para uso como catalisador na degradação de um poluente orgânico em solução aquosa a partir do processo foto-Fenton. A zeólita foi preparada usando gel nucleante como indutor de formação da estrutura tipo MFI. Nanopartículas de óxido de ferro foram suportadas sobre a zeólita através da técnica de impregnação incipiente. Além disso, nanopartículas de óxido de ferro foram preparadas para fins de comparação entre as atividades catalíticas na reação foto-Fenton. Os materiais produzidos foram caracterizados por difração de raios X, microscopia eletrônica de varredura e análise de adsorção/dessorção de nitrogênio. Os resultados revelaram a formação do sistema Fe2O3/ZSM-5 com propriedades intrínsecas que resultaram em satisfatória atividade catalítica, sendo superior ao óxido de ferro. Além disso, esse sistema apresentou excelente atividade e estabilidade após três ciclos de reuso. O material Fe2O3/ZSM-5 produzido neste trabalho apresenta-se como um catalisador promissor para uso na reação foto-Fenton para a degradação de poluentes orgânicos em soluções aquosas.

  17. (1−x)[(K$_{0.5}$Na$_{0.5}$)NbO$_3$–LiSbO$_3

    Indian Academy of Sciences (India)

    Lead-free piezoelectric ceramics ( 1 − x ) [0.95(K 0.5 Na 0.5 )NbO 3 –0.05LiSbO 3 ]– x BiFe 0.8 Co 0.2 O 3 (KNN–LS– x BFC) were prepared by a conventional sintering technique. The effect of BFC content on the structure, piezoelectricand electrical properties of KNN–LS ceramics was investigated. The results reveal that ...

  18. ANATOMIA DA MADEIRA E CASCA DO MARICÁ, Mimosa bimucronata (DC. O. Kuntze

    Directory of Open Access Journals (Sweden)

    José Newton Cardoso Marchiori

    1993-12-01

    Full Text Available São descritos os caracteres gerais, macroscópicos e microscópicos da madeira de Mimosa bimucronata (DC. O. Kutze, bem como a estrutura de sua casca. A anatomia da madeira é comparada com referências da literatura para espécies afins. Os caracteres observados incluem placa de perfuração simples em vasos, pontuados alternos, pontuações ornamentadas, parênquima paratraqueal, fibras libriformes, raios homogêneos de células procumbentes e ausência de estratificação. Na estrutura da casca destacam-se o líber duro em faixas tangenciais descontínuas, envolvidas por células parenquimáticas geralmente cristalíferas, o curso irregular dos raios na casca interna e a formação de cunhas de parênquima na casca mediana.

  19. Substitution behavior of x(Na0.5K0.5)NbO3-(1 - x)BaTiO3 ceramics for multilayer ceramic capacitors by a near edge x-ray absorption fine structure analysis

    Science.gov (United States)

    Ha, Jooyeon; Ryu, Jiseung; Lee, Heesoo

    2014-06-01

    The doping effect of (Na0.5K0.5)NbO3 (NKN) as alternatives for rare-earth elements on the electrical properties of BaTiO3 has been investigated, in terms of their substitution behavior. The dielectric constant of a specimen with x = 0.05 was about 79% higher than that of pure BaTiO3, and the temperature coefficient of capacitance was satisfied by the X7R specification. The specimen with x = 0.05 showed the lowest tetragonality among the four compositions and had a fine grain size of x-ray absorption fine structure spectroscopy, the practical substitution behavior was defined by the change in Ti 3d orbital states. The energy separation of the Ti 3d orbitals was more apparent with the specimen of x = 0.05, which is related to the donor level from the donor substitution of Nb5+ ion for Ti-sites. Therefore, the simultaneous substitution of Na+/K+ and Nb5+ ions into BaTiO3 can improve dielectric properties, based on the charge-transfer process.

  20. Effect of increasing concentration of Na2O on structural, elastic and optical properties of (90  -  x)GeO2-xNa2O-10PbO glass system in the germanate anomaly region

    Science.gov (United States)

    Zainudin, C. N.; Hisam, R.; Yusof, M. I. M.; Yahya, A. K.; Halimah, M. K.

    2017-10-01

    Ternary germanate glasses (90  -  x)GeO2-xNa2O-10PbO (x  =  10-30 mol%) have been prepared by the melt-quenching method. Density, ρ increased with Na2O content up to maxima at 20 mol% while molar volume, V a showed an opposite trend to the density, with a minima at 20 mol% of Na2O content indicating the presence of the germanate anomaly. Ultrasonic velocity measurements showed both longitudinal, v l and shear, v s velocities increased up to 20 mol% before decreasing with further addition of Na2O. Independent longitudinal, L and shear, G moduli along with Young’s modulus, Y, mean sound velocity, v m, Debye temperature, θ D, and hardness, H recorded maximum values at 20 mol% of Na2O content which were suggested to be related to the germanate anomaly. Structural modification occurring due to conversion of six-membered GeO4 rings to three-membered rings of GeO4 changed bond density and compactness of the glass systems and caused the increase in rigidity and stiffness of the glasses. Beyond 20 mol% of Na2O, the decrease in the elastic moduli was due to depolymerization of the glass network. Meanwhile, optical energy gap, E opt exhibited a minima at 20 mol% whereas Urbach energy, E U and refractive index, n showed a maxima at the same concentration, thereby indicating variation in polarizability due to changes in concentration of bridging and non-bridging oxygen.

  1. Investigation into the dehydration of selenate doped Na2M(SO4)2·2H2O (M = Mn, Fe, Co and Ni): Stabilisation of the high Na content alluaudite phases Na3M1.5(SO4)3-1.5x(SeO4)1.5x (M = Mn, Co and Ni) through selenate incorporation

    Science.gov (United States)

    Driscoll, L. L.; Kendrick, E.; Knight, K. S.; Wright, A. J.; Slater, P. R.

    2018-02-01

    In this paper we report an investigation into the phases formed on dehydration of Na2M(SO4)2-x(SeO4)x·2H2O (0 ≤ x ≤ 1; M = Mn, Fe, Co and Ni). For the Fe series, all attempts to dehydrate the samples doped with selenate resulted in amorphous products, and it is suspected that a side redox reaction involving the Fe and selenate may be occurring leading to phase decomposition and hence the lack of a crystalline product on dehydration. For M = Mn, Co, Ni, the structure observed was shown to depend upon the transition metal cation and level of selenate doping. An alluaudite phase, Na3M1.5(SO4)3-1.5x(SeO4)1.5x, was observed for the selenate doped compositions, with this phase forming as a single phase for x ≥ 0.5 M = Co, and x = 1.0 M = Ni. For M = Mn, the alluaudite structure is obtained across the series, albeit with small impurities for lower selenate content samples. Although the alluaudite-type phases Na2+2y(Mn/Co)2-y(SO4)3 have recently been reported [1,2], doping with selenate appears to increase the maximum sodium content within the structure. Moreover, the selenate doped Ni based samples reported here are the first examples of a Ni sulfate/selenate containing system exhibiting the alluaudite structure.

  2. Phase formation in the systems ZrO2-H2SO4-Na2SO4 (NaCl)-H2O

    International Nuclear Information System (INIS)

    Sozinova, Yu.P.; Motov, D.L.; Rys'kina, M.P.

    1988-01-01

    Formation of solid phases in the systems ZrO 2 - H 2 SO 4 - Na 2 SO 4 (NaCl) - H 2 O at 25 and 75 deg C is studied. Three basic Na 2 Zr(OH) 2 (SO 4 ) 2 x (0.2 - 0.4)H 2 O, NaZrOH(SO 4 ) 2 x H 2 O, NaZrO 0.5 (OH) 2 SO 4 x 2H 2 O and three normal sodium sulfatozirconates Na 2 Zr(SO 4 ) 3 x 3H 2 O, Na 4 Zr(SO 4 ) 4 x 3H 2 O, Na 6 Zr(SO 4 ) 5 x 4H 2 O have been isolated, their solubility and crystal optical properties are determined

  3. Efeito do armazenamento de argilas esmectíticas nas suas propriedades reológicas

    Directory of Open Access Journals (Sweden)

    I. A. da Silva

    Full Text Available Resumo Este trabalho investigou a influência do armazenamento de argilas esmectíticas naturais e industrializadas nas suas propriedades reológicas, tendo em vista que a reação de dupla troca que ocorre após o tratamento das argilas policatiônicas com o Na2CO3 é reversível. Os fenômenos envolvidos nesta reação ainda não são totalmente conhecidos e estudos anteriores mostram melhoras em algumas propriedades. As propriedades reológicas foram determinadas em argilas sódicas em 1995 e policatiônicas aditivadas com carbonato de sódio (Na2CO3 em 2015. A caracterização física, química e mineralógica das amostras foi realizada através das seguintes técnicas: análise granulométrica por difração a laser, composição química por fluorescência de raios X, difração de raios X e análises térmicas (DTA e TG. A reologia das dispersões foi determinada através da viscosidade aparente, viscosidade plástica e volume do filtrado, onde posteriormente foram consideradas normas da indústria do petróleo apenas como parâmetro de referência. Os resultados mostraram que as condições de armazenamento, umidade e tamanho de partículas das amostras trouxeram melhoras nas suas propriedades reológicas no decorrer dos anos, indicando a não reversibilidade da reação de troca de cátions, o que é importante na sua validade após fabricação.

  4. Crystal structure of Na4Co7−xAl0.67x(As1−yPyO46 (x = 1.60; y = 0.116

    Directory of Open Access Journals (Sweden)

    Chokri Issaoui

    2016-04-01

    Full Text Available The title compound, tetrasodium hepta(cobalt/aluminium hexa(arsenate/phosphate, Na4Co5.40Al1.07(As0.883P0.116O46, was prepared by a solid-state reaction. It is a new member of the family of isostructural compounds with the general formula A4M7(XO46 (A: Na, K; M: Ni, Co; X: P, As that is most similar to Na4Co5.63Al0.91(AsO46. The Co2+ ions in the title compound are substituted by Al3+ in a fully occupied octahedral site (site symmetry 2/m and a partially occupied tetrahedral site (site symmetry 2. A third octahedral site is fully occupied by Co2+ ions only. With regard to the P and As atoms, one site (site symmetry m is simultaneously occupied by As and P, whereas in the second site there is only arsenic. The alkali cations are, as in the isostructural compounds, distributed over half-occupied crystallographic sites, with a positional disorder of one of them. The proposed structural model is based both on a careful investigation of the crystal data, as well as validation by means of bond-valence-sum (BVS and charge-distribution (CHARDI calculations. The correlation between the X-ray refinement and the validation results is discussed.

  5. Quaternary selenostannates Na{sub 2-x}Ga{sub 2-x}Sn{sub 1+x}Se{sub 6} and AGaSnSe{sub 4} (A=K, Rb, and Cs) through rapid cooling of melts. Kinetics versus thermodynamics in the polymorphism of AGaSnSe{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, S -J; Iyer, R G; Kanatzidis, M G

    2004-10-01

    The quaternary alkali-metal gallium selenostannates, Na{sub 2-x}Ga{sub 2-x}Sn{sub 1+x}Se{sub 6} and AGaSnSe{sub 4} (A=K, Rb, and Cs), were synthesized by reacting alkali-metal selenide, Ga, Sn, and Se with a flame melting-rapid cooling method. Na{sub 2-x}Ga{sub 2-x}Sn{sub 1+x}Se{sub 6} crystallizes in the non-centrosymmetric space group C2 with cell constants a=13.308(3) A, b=7.594(2) A, c=13.842(3) A, {beta}=118.730(4) deg., V=1226.7(5) A{sup 3}. {alpha}-KGaSnSe{sub 4} crystallizes in the tetragonal space group I4/mcm with a=8.186(5) A and c=6.403(5) A, V=429.1(5) A{sup 3}. {beta}-KGaSnSe{sub 4} crystallizes in the space group P2{sub 1}/c with cell constants a=7.490(2) A, b=12.578(3) A, c=18.306(5) A, {beta}=98.653(5) deg., V=1705.0(8) A{sup 3}. The unit cell of isostructural RbGaSnSe{sub 4} is a=7.567(2) A, b=12.656(3) A, c=18.277(4) A, {beta}=95.924(4) deg., V=1741.1(7) A{sup 3}. CsGaSnSe{sub 4} crystallizes in the orthorhombic space group Pmcn with a=7.679(2) A, b=12.655(3) A, c=18.278(5) A, V=1776.1(8) A{sup 3}. The structure of Na{sub 2-x}Ga{sub 2-x}Sn{sub 1+x}Se{sub 6} consists of a polar three-dimensional network of trimeric (Sn,Ga){sub 3}Se{sub 9} units with Na atoms located in tunnels. The AGaSnSe{sub 4} possess layered structures. The compounds show nearly the same Raman spectral features, except for Na{sub 2-x}Ga{sub 2-x}Sn{sub 1+x}Se{sub 6}. Optical band gaps, determined from UV-Vis spectroscopy, range from 1.50 eV in Na{sub 2-x}Ga{sub 2-x}Sn{sub 1+x}Se{sub 6} to 1.97 eV in CsGaSnSe{sub 4}. Cooling of the melts of KGaSnSe{sub 4} and RbGaSnSe{sub 4} produces only kinetically stable products. The thermodynamically stable product is accessible under extended annealing, which leads to the so-called {gamma}-form (BaGa{sub 2}S{sub 4}-type) of these compounds.

  6. Síntese e caracterização de nanopartículas de maghemita associada à dextrana funcionalizada com rodamina B

    OpenAIRE

    Jesus, Chelry Fernanda Alves de

    2014-01-01

    Neste trabalho, foram sintetizadas nanopartículas de maghemita (cristalitos com diâmetros médios de 5,6 e 5,3 nm) associadas à dextrana a partir da precipitação de sais de ferro em meio alcalino na presença de dextrana de massas moleculares de 250 kDa e 75 kDa. As dispersões coloidais aquosas de maghemita/dextrana reagiram com diferentes quantidades de epicloridrina visando à reticulação da dextrana. As características das amostras obtidas foram avaliadas por difração de raios-x, microscopia ...

  7. PROPRIEDADES EMULSIONANTES E SOLUBILIDADE DA CASEÍNA BOVINA: 2. EFEITO DA ADIÇÃO DE NaCl EMULSIFYING PROPERTIES AND SOLUBILITY OF CASEIN: 2. EFFECTS OF THE NaCl ADDITION

    Directory of Open Access Journals (Sweden)

    Ângela Jardim DUARTE

    1998-08-01

    Full Text Available O efeito da adição de NaCl sobre algumas propriedades funcionais da caseína e de seus hidrolisados trípticos, foi estudado em dois valores de pH (4,0 e 5,0. Para tal, foi adicionado um teor de 0,02M do sal às soluções-tampão empregadas no preparo das amostras. Foram determinadas a solubilidade protéica, a capacidade emulsificante (EC, o índice de atividade emulsificante (EAI e a estabilidade das emulsões (ES, e o raio médio dos glóbulos de gordura (R foi calculado. Os resultados obtidos indicaram que, nos dois valores de pH estudados, a adição de NaCl levou a um aumento significativo da solubilidade e da EC da caseína e de todos os hidrolisados trípticos. Por outro lado, diminuiu os valores de EAI da caseína e elevou os dos hidrolisados, tendo sido observado o oposto para o tamanho dos glóbulos de gordura. Com relação à ES, a da caseína apresentou ligeiro aumento no pH 5,0, enquanto que apenas alguns hidrolisados trípticos tiveram a sua ES elevada em pH 4,0 ou 5,0.The effect of the NaCl addition on the emulsifying properties of casein and tryptic casein hydrolysates was studied in two pH values (4,0 e 5,0. A 0.02 M concentration of salt was added to the buffer solutions used for preparing the samples. The protein solubility, the emulsifying capacity (EC, the emulsifying activity index (EAI and the emulsion stability (ES were determined. The mean radius (R of fat droplets was also calculated. The results showed that the addition of NaCl increased the solubility and the EC of casein and casein hydrolysates, in both pH values. However, this salt addition reduced the EAI of casein and increased that of the hydrolysates.The opposite was observed relating to the R of fat droplets. Regarding the ES, that of casein presented little increase in pH 5.0, and the same result was obtained for only some hydrolysates in pH 5.0 or 4.0.

  8. Phase and morphology evolution of (Na1-xKxNbO3 powders related to calcinations and K2CO3 content

    Directory of Open Access Journals (Sweden)

    Steven J. Milne

    2007-03-01

    Full Text Available Sodium-potassium niobate ((Na1-xKxNbO3 powders with x = 0.2, 0.4, 0.6 and 0.8 were prepared following the conventional mixed oxide method and characterized by TG-DTA, XRD and SEM techniques.The effects of calcination temperature, dwell time and K2CO3 content on phase formation behavior and morphology of the powders were investigated. The calcination temperature and dwell time were found tohave a pronounced effect on the phase formation of the calcined sodium-potassium niobate powders. It was found that the crystallized phase depended on calcination conditions. The high calcination temperature andlong dwell time clearly favored particle growth and the formation of large and hard agglomerates. All the (Na1-xKxNbO3 powders showed a similar orthorhombic phase structure. The K2CO3 content significantlyaffected the calcination temperature and particle size and shape. Large particle size, cubic shape and a lower calcined condition were observed in (Na1-xKxNbO3 powder with low K2CO3 content (x = 0.2.

  9. Estudo de ligas de ouro por XRF e SEM-EDS

    OpenAIRE

    Coxito, Afonso Maria Teixeira

    2016-01-01

    Serve o presente estudo para testar uma metodologia para análise de ligas metálicas, em particular ligas de ouro, utilizando as técnicas de fluorescência de raios-X e microscopia electrónica de varrimento. No contexto do presente estudo, foi identificada a composição das folhas de ouro utilizadas em obras de arte. As técnicas laboratoriais utilizadas foram: Microscopia óptica; Espectroscopia de fluorescência de raios-X com dispersão de energia (EDXRF); Microscopi...

  10. Estudo morfológico do efeito radioprotetor da vitamina E (dl-alfa-tocoferil na reparação tecidual em ratos

    Directory of Open Access Journals (Sweden)

    Manzi Flávio Ricardo

    2003-01-01

    Full Text Available Esta pesquisa teve por finalidade avaliar a ação da vitamina E como radioprotetora no processo de reparação tecidual em ratos, após sofrerem um procedimento cirúrgico, que consistiu da produção de uma ferida na região dorsal anterior. Os animais foram divididos em cinco grupos: grupo CO (controle - constituído de animais em que foi produzida somente a ferida; grupo VE - pré-tratamento com vitamina E (90 UI; grupo IR - irradiação três dias após a cirurgia; grupo VEIR - pré-tratamento com 90 UI de vitamina E e irradiação de suas bordas três dias após a cirurgia; grupo OIR - pré-tratamento com óleo de oliva e irradiação de suas bordas três dias após a cirurgia. A ação radioprotetora da vitamina E foi avaliada pela coloração por hematoxilina-eosina para análise morfológica do tecido de granulação, aos 4, 7, 14 e 21 dias após a cirurgia. A análise dos resultados mostrou que o retardo no processo de reparação tecidual causado por 6 Gy de radiação de elétrons com feixe de 6 MeV não ocorreu no grupo de animais que recebeu vitamina E, mostrando-se esta substância efetiva como radioprotetora.

  11. Effect of chloride substitution on the order–disorder transition in NaBH{sub 4} and Na{sup 11}BD{sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Olsen, Jørn Eirik [Institute for Energy Technology, Physics Department, P.O. Box 40, NO-2027 Kjeller (Norway); Karen, Pavel [University of Oslo, Department of Chemistry, P.O. Box 1033 Blindern, NO-0315 Oslo (Norway); Sørby, Magnus H. [Institute for Energy Technology, Physics Department, P.O. Box 40, NO-2027 Kjeller (Norway); Hauback, Bjørn C., E-mail: bjorn.hauback@ife.no [Institute for Energy Technology, Physics Department, P.O. Box 40, NO-2027 Kjeller (Norway)

    2014-02-25

    Graphical abstract: Interactions that order the BD{sub 4}{sup -} tetrahedra below the order–disorder transition became increasingly frustrated by the solute in the Na({sup 11}BD{sub 4}){sub 1−x}Cl{sub x} solid solutions, and the order disappears at x = 0.158. Highlights: • The order–disorder transition temperature for Na(BH{sub 4}){sub 1−x}Cl{sub x} and Na({sup 11}BD{sub 4}){sub 1−x}Cl{sub x} is highly dependent on the Cl-content, x. • The transition is characterized by DSC for Na({sup 11}BD{sub 4}){sub 1−x}Cl{sub x} for x = 0, 0.10 and 0.15. • No transition is observed for x ⩾ 0.20 on cooling to 8 K. • The crystal structures are reported for Na{sup 11}BD{sub 4} at room temperature and 8 K and Na({sup 11}BD{sub 4}){sub 1−x}Cl{sub x} (x = 0.10, 0.15, 0.20 and 0.25) at 8 K from powder neutron diffraction. -- Abstract: Phase transition associated with anion disordering over two orientations in Na{sup 11}BD{sub 4} (NaBH{sub 4}) and its solid solutions with NaCl, Na({sup 11}BD{sub 4}){sub 1−x}Cl{sub x}, is investigated with powder diffraction (neutron and synchrotron radiation), differential scanning calorimetry and Raman spectroscopy. Upon heating, the transition temperature extrapolated to zero rate of heating is 192.2 K for Na{sup 11}BD{sub 4}, ΔS = 4.41 J/mol K, hysteresis 1.7 K and the volume increase 0.43%. Thermal parameters of the transition in Na({sup 11}BD{sub 4}){sub 1−x}Cl{sub x} follow a colligative-property model of an ideal solution, with x = 0.158(1) as the critical concentration at which the ordering interactions and the transition itself are eliminated. On approaching this limit, the tetragonal distortion of the ordered structure decreases somewhat towards the cubic average, and this is associated with a partial disorder of the tetrahedral anions seen by diffraction methods. In fact, a 3% disorder is already present in the pure solvent of the solid solution (Na{sup 11}BD{sub 4}) at 8 K.

  12. Anatomia da madeira e casca do maricá, Mimosa bimucronata (DC. O. Kuntze.

    Directory of Open Access Journals (Sweden)

    José Newton Cardoso Marchiori

    2009-09-01

    Full Text Available Normal 0 21 false false false MicrosoftInternetExplorer4 São descritos os caracteres gerais, macroscópicos e microscópicos da madeira de Mimosa bimucronata (DC. O. Kutze, bem como a estrutura de sua casca. A anatomia da madeira é comparada com referências da literatura para espécies afins. Os caracteres observados incluem placa de perfuração simples em vasos, pontuados alternos, pontuações ornamentadas, parênquima paratraqueal, fibras libriformes, raios homogêneos de células procumbentes e ausência de estratificação. Na estrutura da casca destacam-se o líber duro em faixas tangenciais descontínuas, envolvidas por células parenquimáticas geralmente cristalíferas, o curso irregular dos raios na casca interna e a formação de cunhas de parênquima na casca mediana.

  13. Caracterização de sedimento proveniente de dragagem de canais pluviais do município de Salvador-BA visando sua utilização em cerâmica estrutural

    Directory of Open Access Journals (Sweden)

    O. C. Santos

    Full Text Available Resumo Este trabalho teve como objetivo caracterizar o sedimento proveniente de dragagem de canais pluviais (SCP, do município de Salvador-BA, visando sua máxima substituição pela argila em cerâmica estrutural, uma vez que essa mistura binária faz parte do projeto piloto da massa padrão, na pesquisa da formulação de blocos intertravados cerâmicos. Inicialmente o sedimento foi submetido aos ensaios de índice de plasticidade, analise química por fluorescência de raios X, análise mineralógica por difração de raios X, analise térmica e granulométrica. A morfologia do material foi analisada utilizando-se microscopia eletrônica de varredura, acompanhada de espectroscopia de energia dispersiva. Em seguida foram feitas adições de sedimento (SCP a uma argila do município de Candeias-BA, nas proporções de 10, 20, 30 e 40% em massa. Foram preparados corpos de prova por prensagem uniaxial nas dimensões 60 mm x 20 mm, com pressão de compactação de 25 MPa, sendo que o material foi umidificado com 8% de água. A queima foi realizada em forno resistivo a 850, 950 e 1050 °C, com taxa de aquecimento de 5 °C/min. As propriedades avaliadas foram retração linear, absorção de água e módulo de ruptura à flexão. Os resultados indicaram que é possível a utilização do SCP em cerâmica estrutural, mediante os pré-requisitos exigidos em normas, na fabricação de telhas, blocos de vedação e tijolos.

  14. Estudo do amido de farinhas comerciais comestíveis Characterization of commercial edible starch flours

    Directory of Open Access Journals (Sweden)

    Bianca N. B. Lima

    2012-01-01

    Full Text Available O amido em quatro tipos de farinhas comerciais para uso doméstico em preparações culinárias foi caracterizado pelas técnicas de espectroscopia de absorção na região do infravermelho com Transformada de Fourier (FTIR, difração de raios X (DRX, análise termogravimétrica e ressonância magnética nuclear de baixo campo, por meio da determinação do tempo de relaxação spin-rede do núcleo de hidrogênio (T1H.Four commercial flour samples with starch components were studied. They were characterized by Infrared spectroscopy, X-ray diffraction, thermogravimetric analysis and low field NMR (T1H.

  15. Preparação e caracterização de organobentonita modificada com ionenos alifáticos Preparation and characterization of aliphatic ionene-modified organobentonite

    Directory of Open Access Journals (Sweden)

    Arão P. Costa Filho

    2005-07-01

    Full Text Available A preparação de complexos bentonita-ionenos a partir da adsorção de tetrametil-[x,y]-ionenos, onde x= 2 e y= 4,6,10 ou 12, e o 2-hidróxi-3-cloro-ioneno, EPI-DMA, foi realizada com a finalidade de observar o comportamento do tamanho do espaçador do ioneno na expansão basal (d001 das camadas de uma bentonita comercial do Brasil. Os complexos foram caracterizados por espectrometria de absorção na região do infravermelho, termogravimetria, fluorescência e difração de raios X. A partir das análises por fluorescência e difração de raios X dos complexos, foi observado que os poli-quaternários de amônio são adsorvidos nas superfícies internas e externas da argila delaminada, acima da capacidade de troca catiônica, CTC = 91 meq/100g de argila (calculada a partir de dados de fluorescência de raios X. A expansão basal das camadas da argila com os diferentes policátions revelou que o tamanho do espaçador é o fator mais importante, independentemente das massas molares dos ionenos, tal como foi observado principalmente entre os complexos Bt-2,10- e Bt-2,12-ioneno, com massas molares de 12000 e 5000 g/mol, respectivamente.The preparation of bentonite-ionene complexes based on the adsorption of 2y-ionenes, where y = 4, 6, 10 or 12 and an ionene of the epichloridrin-dimethylamine EPI-DMA kind, was carried out in order to observe the behavior of the ionene spacer size in the expansion of the basal space (d-spacing, d001 of a Brazilian commercial bentonite. The complexes were characterized by adsorption spectromety in the infrared region, thermogravimetry, fluorescence and X-Ray diffraction. Ionenes were synthesized and characterized by infrared and nuclear magnetic resonance, the latter technique being useful for determining the average number molecular weight values. Based on the clay-ionenes complexes it could be observed that the ammonium polyquaternaries are adsorbed on the inner and outer clay surfaces, above the ion exchange

  16. AÇÃO DO OMENTO NA CICATRIZAÇÃO DE ANASTOMOSES COLÔNICAS. ESTUDO EXPERIMENTAL EM RATOS

    Directory of Open Access Journals (Sweden)

    Greca Fernando Hintz

    1998-01-01

    Full Text Available Desde o século XIX o omento maior vem sendo utilizado em diferentes procedimentos cirúrgicos. O objetivo desse estudo foi avaliar os efeitos da omentoplastia na cicatrização de anastomoses colônicas em ratos. Utilizaram-se 64 ratos machos, que foram divididos em 4 grupos (A,AN,B,C. Realizou-se uma anastomose colônica situada há 5 cm da borda anal, de três maneiras diferentes: para os grupos A e AN , anastomose padrão com 8 pontos seromusculares; para o grupo B, anastomose isquêmica e, para o grupo C uma anastomose deficiente com apenas 4 pontos. Na metade dos animais de cada grupo a anastomose foi recoberta com o omento e desta forma obteve-se os subgrupos AO, ANO, BO, CO. No grupo AN e ANO utilizou-se tinta nanquim para avaliar a neovascularizção. Todos os animais foram submetidos a eutanásia no 7o dia de pós-operatório. Concluiu-se que a utilização da omentoplastia promoveu, uma neovascularização na área de anastomose, aumentou a presença de colágeno e levou a uma diminuição da presença de aderências próximo da linha de sutura.

  17. Lodo gerado na estação de tratamento de água Tamanduá, Foz do Iguaçu, PR, como aditivo em argilas para cerâmica vermelha: Parte I: caracterização do lodo e de argilas do terceiro planalto paranaense Generated sludge at water treatment station Tamanduá, Foz do Iguaçu, PR, as additive in red clay for ceramics: Part I: characterization of sludge and clay Paraná third plateau

    Directory of Open Access Journals (Sweden)

    R. Tartari

    2011-09-01

    Full Text Available Com a finalidade de pesquisar a incorporação do lodo gerado na ETA Tamanduá em massas para cerâmica vermelha, como método de destinação final, o presente artigo tem como objetivo caracterizar o lodo da ETA Tamanduá e quatro argilas da região Oeste do Paraná utilizadas na produção de cerâmica vermelha estrutural e de artesanato, visando avaliar o potencial tecnológico deste resíduo. Nessa primeira etapa experimental de caracterização, determinaram-se a umidade, composição química por fluorescência de raios X, compostos cristalinos por difração de raios X, limites de consistência de solos (Atterberg, distribuição granulométrica e a estrutura das partículas por microscopia eletrônica de varredura (MEV. Destaca-se que as argilas possuem propriedades favoráveis para produção de cerâmica vermelha. Já o lodo, possui características elementares de matéria-prima de baixa plasticidade, composto majoritariamente por SiO2, Al2O3 e Fe2O3, com perda ao fogo elevada (20,4%, baixo índice de plasticidade igual a (7,4, fração de argila correspondentes a 5,3%. As características observadas sugerem a possibilidade de, na segunda etapa, incorporar o lodo com umidade natural (75% como aditivo na massa cerâmica, visando reduzir a retração, bem como minimizar a adição de água às massas para produção de cerâmica vermelha.With a view to investigate the incorporation of sludge generated in ETA Tamanduá masses for red ceramics, such as disposal method, this paper aims to characterize the sludge ETA Tamanduá and four clays of western Paraná used to produce structural red ceramic and artistic ceramic, to evaluate the technological potential of this residue. In this first experimental phase of characterization, we determined the moisture, chemical composition by X-ray fluorescence, crystalline compounds by X-ray diffraction, Atterberg limits of soils (Atterberg, size distribution and structure of particles by electron

  18. Effects of Na and K ions on the crystallization of low-silica X zeolite and its catalytic performance for alkylation of toluene with methanol

    Energy Technology Data Exchange (ETDEWEB)

    Hui, Haitao; Gao, Junhua; Wang, Gencun; Liu, Ping; Zhang, Kan, E-mail: gaojunhua@sxicc.ac.cn, E-mail: zhangkan@sxicc.ac.cn [State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan (China)

    2014-01-15

    The crystallization of low-silica X zeolite (LSX) was studied in Na-K gel systems with different extents of replacement of Na by K while fixed content of other components. X-ray diffraction, inductively coupled plasma atomic emission spectroscopy, scanning electron microscopy, infrared spectra, and nuclear magnetic resonance were used to characterize liquid and solid phase. In the synthesis of LSX, the molar ratio of K/(Na + K) affects the crystallization and the composition of final products. A higher mole fraction of K corresponded to a lower crystallization rate, higher concentration of Si in the liquid phase, and lower Si/Al ratio of the obtained LSX. The average size of LSX products steadily increased with the progressive replacement of Na by K in the initial gels, and crystal morphology of the LSX products gradually changed from round to octahedral. For alkylation of toluene with methanol over obtained LSX, the selectivity of ring alkylation product xylene decreased while the side chain alkylation products styrene and ethylbenzene increased with the increased x values except x = 0, which was due to its low crystallinity. (author)

  19. Effects of Na and K ions on the crystallization of low-silica X zeolite and its catalytic performance for alkylation of toluene with methanol

    International Nuclear Information System (INIS)

    Hui, Haitao; Gao, Junhua; Wang, Gencun; Liu, Ping; Zhang, Kan

    2014-01-01

    The crystallization of low-silica X zeolite (LSX) was studied in Na-K gel systems with different extents of replacement of Na by K while fixed content of other components. X-ray diffraction, inductively coupled plasma atomic emission spectroscopy, scanning electron microscopy, infrared spectra, and nuclear magnetic resonance were used to characterize liquid and solid phase. In the synthesis of LSX, the molar ratio of K/(Na + K) affects the crystallization and the composition of final products. A higher mole fraction of K corresponded to a lower crystallization rate, higher concentration of Si in the liquid phase, and lower Si/Al ratio of the obtained LSX. The average size of LSX products steadily increased with the progressive replacement of Na by K in the initial gels, and crystal morphology of the LSX products gradually changed from round to octahedral. For alkylation of toluene with methanol over obtained LSX, the selectivity of ring alkylation product xylene decreased while the side chain alkylation products styrene and ethylbenzene increased with the increased x values except x = 0, which was due to its low crystallinity. (author)

  20. Structural study and electronic band structure investigations of the solid solution Na xCu1-xIn5S8 and its impact on the Cu(In,Ga)Se2/In2S3 interface of solar cells

    International Nuclear Information System (INIS)

    Lafond, A.; Guillot-Deudon, C.; Harel, S.; Mokrani, A.; Barreau, N.; Gall, S.; Kessler, J.

    2007-01-01

    The present work reports investigations on the new In 2 S 3 containing Cu and/or Na compounds, which are expected to be formed at the Cu(In,Ga)Se 2 /In 2 S 3 interface. The knowledge of these materials properties is very important in order to better understand the operation of the devices based on these junction partners. It has been observed that a solid solution Na x Cu 1-x In 5 S 8 exists from CuIn 5 S 8 (x = 0) to NaIn 5 S 8 (x = 1) with a spinel-like structure. The single crystal structure determination shows that indium, copper and sodium atoms are statistically distributed on the tetrahedral sites. XPS investigations on the CuIn 5 S 8 , Na 0.5 Cu 0.5 In 5 S 8 and NaIn 5 S 8 compounds combined with the band gap changes reported in a previous work show that these variations are mainly due to valence band maximum shift; it is moved downward when x increases from 0 to 1. These observations are confirmed by the electron structure calculations based on the density functional theory, which additionally demonstrate that the pure sodium compound has direct gap whereas the copper-containing compounds have indirect gaps

  1. Synthesis and characterization of sodium vanadium oxide gels: the effects of water (n) and sodium (x) content on the electrochemistry of Na(x)V2O5·nH2O.

    Science.gov (United States)

    Lee, Chia-Ying; Marschilok, Amy C; Subramanian, Aditya; Takeuchi, Kenneth J; Takeuchi, Esther S

    2011-10-28

    Sodium vanadium oxide gels, Na(x)V(2)O(5)·nH(2)O, of varying sodium content (0.12 n > 0.01) and interlayer spacing were found to be inversely proportional to the sodium level (x), thus control of sodium (x) content provided a direct, chimie douce approach for control of hydration level (n) and interlayer spacing, without the need for high temperature treatment to affect dehydration. Notably, the use of high temperatures to modify hydration levels can result in crystallization and collapse of the interlayer structure, highlighting the distinct advantage of our novel chimie douce synthesis strategy. Subsequent to synthesis and characterization, results from an electrochemical study of a series of Na(x)V(2)O(5)·nH(2)O samples highlight the significant impact of interlayer water on delivered capacity of the layered materials. Specifically, the sodium vanadium oxide gels with higher sodium content and lower water content provided higher capacities in lithium based cells, where capacity delivered to 2.0 V under C/20 discharge ranged from 170 mAh/g for Na(0.12)V(2)O(5)·0.23H(2)O to 300 mAh/g for Na(0.32)V(2)O(5)·0.01H(2)O. The capacity differences were maintained as the cells were cycled. This journal is © the Owner Societies 2011

  2. Mecanismos de absorção de aminoácidos e oligopeptídios. Controle e implicações na dietoterapia humana Mechanisms of amino acids and oligopeptides absorption in humans

    Directory of Open Access Journals (Sweden)

    Patrícia Baston FRENHANI

    1999-12-01

    Full Text Available Os mecanismos envolvidos na absorção de aminoácidos e di-tripeptídios são revistos direcionadamente às implicações na nutrição humana. As membranas borda em escova e basolateral são atravessadas por aminoácidos e di-tripeptídios mediante mecanismos passivos (difusão simples ou facilitada ou ativos (co-transportadores de Na+ ou H+. O sistema ativo dependente de Na+ ocorre principalmente na borda em escova e a difusão simples na basolateral. Ambas as membranas apresentam o transporte passivo facilitado. Os aminoácidos livres usam tanto o sistema passivo, como o ativo, enquanto os di-tripeptídios utilizam mais o sistema ativo (H+. A borda em escova possui sistemas distintos para aminoácidos livres e di-tripeptídios, com os primeiros utilizando preferentemente o Na+-dependente e os demais o H+-dependente. Os aminoácidos livres são transportados em diferentes velocidades por carreadores, em mecanismos saturáveis e competitivos, com especificidade para aminoácidos básicos, ácidos e neutros. Os di e tripeptídios têm pelo menos dois carreadores, ambos H+ dependentes. Na membrana basolateral os aminoácidos livres são transportados por difusão simples enquanto os di-tripeptídios o são ativamente por processo de troca aniônica. A principal regulação do transporte transmembrana de aminoácidos e di-tripeptídios é a concentração desses substratos ao nível da membrana. Afora isso, di e tripeptídios são mais eficientemente absorvidos que os aminoácidos livres os quais por sua vez o são melhor que os tetra ou mais peptídios. Desta forma, o di-tripeptídios resultam em maior retenção nitrogenada que os demais e são particularmente úteis nos casos de redução da capacidade absortiva intestinal. Os peptídios não absorvidos são fermentados pelas bactérias colônicas resultando ácidos graxos de cadeia curta, ácidos dicarboxílicos, compostos fenólicos e amônia. Os ácidos graxos e a amônia são fixados pelas

  3. Structure and electrical properties of (1 − x) (Na0.5Bi0.5)0.94Ba0.06TiO3–x BiAlO3 lead-free piezoelectric ceramics

    International Nuclear Information System (INIS)

    Fu, Peng; Xu, Zhijun; Chu, Ruiqing; Wu, Xueyan; Li, Wei; Li, Xiaodong

    2013-01-01

    Highlights: ► (1 − x) BNBT6–x BA ceramics were prepared by solid-state reaction method. ► Electrical properties of BNBT6 ceramics are improved by the addition of BA. ► (1 − x) BNBT6 - x BA ceramics at x = 0.0225 have the best electrical properties. - Abstract: (1 − x) (Na 0.5 Bi 0.5 ) 0.94 Ba 0.06 TiO 3 –x BiAlO 3 ((1 − x) BNBT6–x BA) lead-free piezoelectric ceramics were synthesized by conventional solid-state processes. Effects of BiAlO 3 (BA) on the structure and electrical properties of (Na 0.5 Bi 0.5 ) 0.94 Ba 0.06 TiO 3 (BNBT6) ceramics were investigated. X-ray diffraction (XRD) data shows that (1 − x) BNBT6–x BA ceramics form the pure perovskite phases, and the ceramics have the morphotropic phase boundary (MPB) when x r = 42.5 μC/cm 2 ), the highest piezoelectric coefficient (d 33 = 204 pC/N), the highest planar coupling factor (k p = 0.3292), the highest dielectric constant (ε r = 1687) and higher mechanical quality factor (Q m = 112)

  4. In situ observation of initial rust formation process on carbon steel under Na2SO4 and NaCl solution films with wet/dry cycles using synchrotron radiation X-rays

    International Nuclear Information System (INIS)

    Yamashita, M.; Konishi, H.; Kozakura, T.; Mizuki, J.; Uchida, H.

    2005-01-01

    Atmospheric corrosion of steel proceeds under thin electrolyte film formed by rain and dew condensation followed by wet and dry cycles. It is said that rust layer formed on steel as a result of atmospheric corrosion strongly affects the corrosion behavior of steel. The effect of environmental corrosiveness on the formation process and structure of the rust layer is, however, not clear to date. In this study, in situ observation of the rusting process of a carbon steel covered with a thin film of Na 2 SO 4 or NaCl solution was performed under a wet/dry repeating condition by X-ray diffraction spectroscopy with white X-rays obtained from synchrotron radiation. The present in situ experiments successfully detected initial process of the rust formation. In the early cycles, the rust constituents were not well crystallized yet, but the presence of Fe(OH) 2 and Fe(OH) 3 was confirmed. In the subsequent cycles, two different solutions resulted in difference in preferential phase of the rust constituents. α-FeOOH was preferentially formed in the case of the Na 2 SO 4 solution film, whereas β-FeOOH appeared only under the NaCl solution film

  5. Síntese e caracterização de vermiculita mesoporosa obtida por modificação com sais complexos de alumínio e lantânio

    Directory of Open Access Journals (Sweden)

    M. V. S. Fernandes

    2014-06-01

    Full Text Available Os estudos de aumento do espaçamento interplanar basal, distribuição de poros e área superficial de uma argila mesoporosa obtida a partir de vermiculita precursora, foram realizados por intercalação de oligômero poli-hidroxi catiônico Al13 e um misto (La xAl13-x obtido por dopagem com lantânio, seguida de calcinação para formação dos pilares. As caracterizações das amostras foram feitas por difração de raios X, espectroscopia Mössbauer, ressonância magnética nuclear do estado sólido (27Al MAS-NMR e isotermas de N2 (BET. A presença de lantânio na estrutura da vermiculita resultou no aumento de sua área e de porosidade.

  6. Efeito da temperatura em processos de sinterização de pós de hidroxiapatita

    Directory of Open Access Journals (Sweden)

    A. G. de S. Azevedo

    2015-03-01

    Full Text Available Amostras de hidroxiapatita foram sintetizadas por meio da precipitação de soluções aquosas contendo os íons precursores. O precipitado obtido foi lavado, seco, desaglomerado e peneirado com o intuito de se obter amostras em forma de pó e com granulometria homogênea. O material foi sinterizado em diferentes temperaturas e posteriormente caracterizado por difração de raios X, espectroscopia no infravermelho, microscopia eletrônica de varredura, análise termogravimétrica e termodiferencial e a quantificação da área superficial específica e porosidade foi realizada por meio dos métodos Brunauer-Emmett-Teller e Barret-Joyner-Halenda, respectivamente. Os pós apresentaram modificações na cristalinidade, morfologia e nas propriedades texturais com o aumento da temperatura. Novas fases foram identificadas nos difratogramas de raios X devido à decomposição do material, corroborando com resultados reportados. Houve o crescimento dos cristais, aumento da cristalinidade e diminuição da área de superfície específica, comprovando que as modificações ocorreram devido aos processos de sinterização, uma vez que a força motriz para esse processo é a diminuição da área de superfície específica.

  7. Caracterização do fármaco hipoglicemiante glibenclamida Characterization of the hypoglycemic drug glibenclamide

    Directory of Open Access Journals (Sweden)

    Christiane Gino Colu Nery

    2008-03-01

    Full Text Available A glibenclamida (GLIB é um fármaco de segunda geração, administrado por via oral na forma de comprimidos, utilizado para o tratamento de Diabetes mellitus. GLIB possui baixa solubilidade aquosa, o que pode levar a uma baixa liberação a partir de formas farmacêuticas sólidas no teste de dissolução e, portanto, a variabilidades no tratamento. Neste estudo, avaliam-se as características da matéria-prima GLIB, que podem influenciar o perfil de dissolução, e conseqüentemente, a biodisponibilidade, por meio de técnicas tais como, adsorção de nitrogênio, difração de raio laser, análise térmica, espectroscopia por IV/UV e difração de raios X.Glibenclamide (GLIB or glyburide, a second-generation hypoglycemic agent is orally used in the form of tablets for the treatment of diabetes mellitus. Bulk GLIB has a low aqueous solubility and it may yield low drug release in the dissolution test, causing variabilility in the treatment. This work evaluates the bulk GLIB features, which may influence drug release profile, hence, bioavailability, by means of techniques such as nitrogen sorption analysis, laser diffraction, thermal analysis, IV/UV spectroscopy and X-ray analysis.

  8. Influência da pressão e temperatura na cristalinidade da illita em sequências Proterozoicas: Norte do Distrito Federal e Goiás, Brasil

    Directory of Open Access Journals (Sweden)

    Laura Flores Brant Campos

    Full Text Available As sequências Proterozoicas, ao Norte no Distrito Federal e na região de Bezerra e Vila Boa (Goiás, são constituídas por calcários e dolomitos, pelitos e arenitos correspondentes aos Grupos Bambuí e Paranoá. No Distrito Federal, tais unidades são sobrepostas tectonicamente por rochas metassedimentares de fácies xisto-verde do Grupo Canastra. Entre os constituintes minerais dos termos pelíticos de todas estas unidades, predominam os filossilicatos, particularmente a illita e a muscovita, identificados por difração de Raios X, com o auxílio de decomposição da reflexão em d(001. O Índice de Kübler (Índice de Cristalinidade da Illita complementa a interpretação da diagênese local e da possível influência de carga tectônica sobre diagênese/metamorfismo, resultante da sobreposição por falha de empurrão das rochas do Grupo Canastra sobre aquelas dos grupos Paranoá e Bambuí, na região do Distrito Federal. Os resultados indicam condições de epizona para as amostras analisadas do Grupo Canastra e anquizona para aquelas dos Grupos Bambuí e Paranoá, sendo que os valores do Índice de Kübler são menores nas rochas expostas ao norte do Distrito Federal do que na região de Bezerra, em Vila Boa. Além disso, os índices das rochas do Grupo Bambuí são inferiores aos do Paranoá em toda a região estudada, indicando que a influência da carga tectônica ocorre de forma gradativa, partindo do ponto de maior carga.

  9. Investigation of the hydrothermal crystallisation of the perovskite solid solution NaCe{sub 1−x}La{sub x}Ti{sub 2}O{sub 6} and its defect chemistry

    Energy Technology Data Exchange (ETDEWEB)

    Harunsani, Mohammad H. [Department of Chemistry, University of Warwick, Coventry CV4 7AL (United Kingdom); Woodward, David I. [Department of Physics, University of Warwick, Coventry CV4 7Al (United Kingdom); Peel, Martin D.; Ashbrook, Sharon E. [School of Chemistry, and EaStCHEM University of St. Andrews, North Haugh, St. Andrews, KY16 9ST (United Kingdom); Walton, Richard I., E-mail: r.i.walton@warwick.ac.uk [Department of Chemistry, University of Warwick, Coventry CV4 7AL (United Kingdom)

    2013-11-15

    Perovskites of nominal composition NaCe{sub 1−x}La{sub x}Ti{sub 2}O{sub 6} (0≤x≤1) crystallise directly under hydrothermal conditions at 240 °C. Raman spectroscopy shows distortion from the ideal cubic structure and Rietveld analysis of powder X-ray and neutron diffraction reveals that the materials represent a continuous series in rhombohedral space group R3-bar c. Ce L{sub III}-edge X-ray absorption near edge structure spectroscopy shows that while the majority of cerium is present as Ce{sup 3+} there is evidence for Ce{sup 4+}. The paramagnetic Ce{sup 3+} affects the chemical shift and line width of {sup 23}Na MAS NMR spectra, which also show with no evidence for A-site ordering. {sup 2}H MAS NMR of samples prepared in D{sub 2}O shows the inclusion of deuterium, which IR spectroscopy shows is most likely to be as D{sub 2}O. The deuterium content is highest for the cerium-rich materials, consistent with oxidation of some cerium to Ce{sup 4+} to provide charge balance of A-site water. - Graphical abstract: A multi-element A-site perovskite crystallises directly from aqueous, basic solutions at 240 °C; while the paramagnetic effect of Ce{sup 3+} on the {sup 23}Na NMR shows a homogeneous solid-solution, the incorporation of A-site water is also found from {sup 2}H NMR and IR, with oxidation of some cerium to charge balance proved by XANES spectroscopy. Display Omitted - Highlights: • Direct hydrothermal synthesis allows crystallisation of a perovskite solid-solution. • XANES spectroscopy shows some oxidation of Ce{sup 3+} to Ce{sup 4+}. • The paramagnetism of Ce{sup 3+} shifts and broadens the {sup 23}Na solid-state NMR. • The perovskite materials incorporate water as an A-site defect.

  10. Investigation of the structure and properties of (KxNa1-x)NbO3-based piezoelectric ceramics using both conventional and high-throughput experimentation (HTE) methods

    International Nuclear Information System (INIS)

    Mgbemere, Henry Ekene

    2012-01-01

    The structure and properties of (K x Na 1-x )NbO 3 lead-free piezoelectric ceramics was investigated in this work. Both the conventional mixed-oxide ceramics synthesis route and the high-throughput experimentation (HTE) approaches were employed for the synthesis. Structural characterization was carried out with synchrotron X-rays while the electrical properties were characterized with techniques (dielectric measurement, hysteresis measurements, impedance measurements etc). Both isovalent and aliovalent elements (Ta, Sb, Li) were used to dope (K x Na 1-x )NbO 3 ceramics in order to improve its piezoelectric properties and sinterability.

  11. Structure of AgxNa1-xPO3 glasses by neutron diffraction and reverse Monte Carlo modelling

    International Nuclear Information System (INIS)

    Hall, Andreas; Swenson, Jan; Karlsson, Christian; Adams, Stefan; Bowron, Daniel T

    2007-01-01

    We have performed structural studies of mixed mobile ion phosphate glasses Ag x Na 1-x PO 3 using diffraction experiments and reverse Monte Carlo simulations. This glass system is particularly interesting as a model system for investigations of the mixed mobile ion effect, due to its anomalously low magnitude in the system. As for previously studied mixed alkali phosphate glasses, with a much more pronounced mixed mobile ion effect, we find no substantial structural alterations of the phosphorous-oxygen network and the local coordination of the mobile cations. Furthermore, the mobile Ag + and Na + ions are randomly mixed with no detectable preference for either similar or dissimilar pairs of cations. However, in contrast to mixed mobile ion systems with a very pronounced mixed mobile ion effect, the two types of mobile ions have, in this case, very similar local environments. For all the studied glass compositions the average Ag-O and Na-O distances in the first coordination shell are determined to be 2.5 ± 0.1 and 2.5 ± 0.1 A, and the corresponding average coordination numbers are approximately 3.2 and 3.7, respectively. The similar local coordinations of the two types of mobile ions suggests that the energy mismatch for a Na + ion to occupy a site that previously has been occupied by a Ag + ion (and vice versa) is low, and that this low energy mismatch is responsible for the anomalously weak mixed mobile ion effect

  12. Compósitos de poli(álcool vinílico contendo hidroxissais lamelares de zinco, intercalados com corantes aniônicos azo (tropaeolina 0 e tropaeolina 00 Poly(vinyl alcohol composites containing layered hydroxide salts, intercalated with anionic azo dyes (tropaeolin 0 and tropaeolin 0

    Directory of Open Access Journals (Sweden)

    Marlon Luiz Neves da Silva

    2013-01-01

    Full Text Available Hidroxissais lamelares de zinco foram intercalados com corantes aniônicos azo, obtendo-se pigmentos de coloração laranja. Os materiais foram caracterizados por difração de raios X (XRD, espectroscopia vibracional na região do infravermelho com transformada de Fourier (FTIR, análise térmica (TGA/DTA/DSC e espectroscopia fotoeletrônica de raios X (XPS. Após caracterização, os pigmentos lamelares foram dispersos em uma matriz de poli(álcool vinílico - PVA, em concentrações variáveis, em relação à massa de PVA. Filmes homogêneos, transparentes e coloridos foram obtidos pelo método de "casting" úmido e mantidos em dessecador em umidade controlada de 65 % por uma semana e avaliados quanto às suas propriedades mecânicas. Devido às diferentes polaridades dos ânions intercalados, diferentes comportamentos foram observados para os pigmentos quando utilizados como cargas em PVA. Esse trabalho abre uma frente de pesquisas na utilização de hidroxissais lamelares intercalados com corantes aniônicos, como cargas alternativas em materiais compósitos poliméricos.Layered zinc hydroxide salts were intercalated with anionic azo dyes, obtaining orange pigments. The materials were characterized by X-ray diffraction (XRD, Fourier Transform Infrared spectroscopy (FTIR, thermal analysis (TGA/DTA/DSC and X-ray photoelectron spectroscopy (XPS. After characterization, the layered pigments were dispersed into a matrix of poly(vinyl alcohol - PVA, in variable concentrations, in relation to the PVA mass. Homogeneous, transparent and colorful films were obtained by wet casting method and kept in a desiccator at 65% of humidity for one week and evaluated in relation to their mechanical properties. Owing to the different intercalated anions polarities, different behaviors were observed for both pigments when used as fillers in PVA. This work opens a research front in the utilization of layered hydroxide salt intercalated with anionic dyes, as

  13. Síntese de hidróxidos duplos lamelares do sistema Cu, Zn, Al-CO3: propriedades morfológicas, estruturais e comportamento térmico Synthesis of layered double hydroxides of the Cu, Zn, Al-CO3 system: morphological and structural properties and thermal behavior

    Directory of Open Access Journals (Sweden)

    S. S. dos Santos

    2011-09-01

    Full Text Available Hidrotalcitas são argilas aniônicas, também conhecidas como Hidróxidos Duplos Lamelares (HDLs e possuem estrutura semelhante ao mineral brucita. Os HDLs do sistema Cu, Zn, Al-CO3 foram sintetizados em condições que favorecem a formação de cristais pequenos e de elevada área superficial. A caracterização foi feita por difração de raios X, análise termogravimétrica, espectroscopia na região do infravermelho e microscopia eletrônica de varredura. A síntese foi feita pelo método de coprecipitação em pH variável, utilizando sulfatos de cobre e zinco, soluções de alumínio e solução de hidróxido sódio. Os difratogramas de raios X mostram que os compostos sintetizados possuem alta cristalinidade; a intensidade e a largura dos picos comprovam que os materiais se apresentam bem organizados e com empilhamento das lamelas. Os espectros de infravermelho apresentaram bandas associadas ao ânion carbonato presente na região interlamelar dos HDLs.Hydrotalcite-like compounds are anionic clays, also known as layered double hydroxides (LDH, which have structure similar to brucite mineral. The LDHs of the system Cu, Zn, Al-CO3 were synthesized under conditions to promote the formation of small crystals with high surface area. The characterization was done by X-ray diffraction, thermogravimetric analysis, FTIR spectroscopy, and scanning electron microscopy. The synthesis were based on the co-precipitation method, under different conditions (hydrothermal bath, titration time using copper and zinc sulfate, aluminum and sodium hydroxide solutions. The X-ray diffraction patterns show that synthesized compounds have high crystallinity, the peak intensities show that they are well organized and stacked with the lamellae. The infrared spectrum shows bands associated with carbonate anion in the interlayer region.

  14. Doping dependence of the anisotropic quasiparticle interference in NaFe(1-x)Co(x)As iron-based superconductors.

    Science.gov (United States)

    Cai, Peng; Ruan, Wei; Zhou, Xiaodong; Ye, Cun; Wang, Aifeng; Chen, Xianhui; Lee, Dung-Hai; Wang, Yayu

    2014-03-28

    We use scanning tunneling microscopy to investigate the doping dependence of quasiparticle interference (QPI) in NaFe1-xCoxAs iron-based superconductors. The goal is to study the relation between nematic fluctuations and Cooper pairing. In the parent and underdoped compounds, where fourfold rotational symmetry is broken macroscopically, the QPI patterns reveal strong rotational anisotropy. At optimal doping, however, the QPI patterns are always fourfold symmetric. We argue this implies small nematic susceptibility and, hence, insignificant nematic fluctuation in optimally doped iron pnictides. Since TC is the highest this suggests nematic fluctuation is not a prerequistite for strong Cooper pairing.

  15. Síntese em reator de hidrometalurgia de nanopartícula de ferrita de cobalto

    OpenAIRE

    Araújo, Elton John Nunes de

    2017-01-01

    Investigamos a síntese de nanopartículas de ferrita de cobalto por precipitação hidrotérmica, em reator de hidrometalurgia em temperaturas entre 100 e 250°C. Foram variados os parâmetros: temperatura de síntese, composição do meio reacional, concentração da base e presença de agente complexante. As nanopartículas obtidas foram caracterizadas do ponto de vista estrutural por difração de raios-X, sua composição foi verifica por medidas de espectroscopia por energia dispersiva de raios-x (EDX) e...

  16. Structure and dielectric properties of (Ba{sub 0.7}Sr{sub 0.3}){sub 1-x}Na{sub x}(Ti{sub 0.9}Sn{sub 0.1}){sub 1-x}Nb{sub x}O{sub 3} ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Ghoudi, Hanen; Khirouni, Kamel [Universite de Gabes, Laboratoire de Physique des Materiaux et des Nanomateriaux Appliquee a l' Environnement (La Phy MNE), Faculte des Sciences de Gabes, Gabes (Tunisia); Chkoundali, Souad [Universite de Sfax, Laboratoire des Materiaux Multifonctionnels et Applications (LaMMA), Faculte des Sciences de Sfax (FSS), Sfax (Tunisia); Aydi, Abdelhedi [Universite de Gabes, Laboratoire de Physique des Materiaux et des Nanomateriaux Appliquee a l' Environnement (La Phy MNE), Faculte des Sciences de Gabes, Gabes (Tunisia); Universite de Sfax, Laboratoire des Materiaux Multifonctionnels et Applications (LaMMA), Faculte des Sciences de Sfax (FSS), Sfax (Tunisia)

    2017-11-15

    (Ba{sub 0.7}Sr{sub 0.3}){sub 1-x}Na{sub x}(Ti{sub 0.9}Sn{sub 0.1}){sub 1-x}Nb{sub x}O{sub 3} ceramics with compositions x = 0.6, 0.7, 0.8 and 0.9 were synthesized using the solid-state reaction method. These ceramics were examined by X-ray diffraction and dielectric measurements over a broad temperature and frequency ranges. X-ray diffraction patterns revealed a single-perovskite phase crystallized in a cubic structure, for x < 0.8, and in tetragonal, for x ≥ 0.8, with Pm3m and P4mm spaces groups, respectively. Two types of behaviors, classical ferroelectric or relaxor, were observed depending on the x composition. It is noted that temperatures T{sub C} (the Curie temperature) or T{sub m} (the temperature of maximum permittivity) rise when x increases and the relaxor character grows more significantly when x composition decreases. To analyze the dielectric relaxation degree of relaxor, various models were considered. It was proven that an exponential function could well describe the temperature dependence of the static dielectric constant and relaxation time. (orig.)

  17. Combined use of EPR and 23Na MAS NMR spectroscopy for assessing the properties of the mixed cobalt-nickel-manganese layers of P3-NayCo1-2xNixMnxO2.

    Science.gov (United States)

    Kalapsazova, M; Ivanova, S; Kukeva, R; Simova, S; Wegner, S; Zhecheva, E; Stoyanova, R

    2017-10-11

    Knowledge on the formation of mixed transition metal layers on lithium and sodium transition metal oxides, Li/Na(Co,Ni,Mn,)O 2 , determines the ability to control their electrochemical properties as electrode materials in alkaline ion batteries. Taking this into account, herein we combine the EPR and 23 Na MAS NMR spectroscopic techniques to gain insights into the structural peculiarities of the mixed cobalt-nickel-manganese layers of Na y Co 1-2x Ni x Mn x O 2 with a three-layer stacking (P3-type) structure. Two types of compositions are examined where diamagnetic Co 3+ and paramagnetic Ni 3+ and Mn 4+ are stabilized: Na 2/3 Co 1/3 Ni 1/3 Mn 1/3 O 2 and Na 1/2 Ni 1/2 Mn 1/2 O 2 . EPR spectroscopy operating in the X- and Q-band region is applied with an aim to improve the spectra resolution and, on the other hand, to provide straightforward information on the coordination of the transition metal ions inside the layers. The analysis of EPR spectra is based on the reference for the Mn 4+ and Ni 2+ ions occurring simultaneously in oxides with two layer stacking, P2-Na 2/3 Ni 1/3 Mn 2/3 O 2 . Complementary to EPR, 23 Na MAS NMR spectroscopy at high spinning rates is undertaken to assess the local structure of the Na nucleus in the layered P3-Na y Co 1-2x Ni x Mn x O 2 oxides. All results are discussed taking into account the EPR and NMR data for the well-known lithium analogues O3-LiCo 1/3 Ni 1/3 Mn 1/3 O 2 and O3-LiNi 1/2 Mn 1/2 O 2 . Finally, the structure peculiarities of the transition metal layers extracted from the EPR and NMR methods are demonstrated by electrochemical intercalation of Li + ions into P3-Na y Co 1-2x Ni x Mn x O 2 .

  18. Falso aneurisma da artéria meníngea média importância do diagnóstico angiográfico: relato de caso

    Directory of Open Access Journals (Sweden)

    Carlos A. M. Melro

    1993-09-01

    Full Text Available É objetivo deste artigo relatar o caso de um paciente com falso aneurisma da artéria meníngea média e fazer breve revisão da literatura sobre o assunto. O paciente, etilista e vítima de quedas frequentes, foi internado para investigação de sindrome convulsiva. Dentre os exames realizados observou-se, ao raio-X do crânio, fratura do osso temporal e, na carótido-angiografia comum, presença de dilatação aneurismática na artéria meníngea média em íntima relação com a fratura. O relato do caso se justifica visto a baixa frequência desta patologia e sua analogia com hematomas intracranianos de evolução atípica, bem como para salientar o papel da carótido-angiografia na avaliação de alguns casos de traumatismo crânio-encefálico.

  19. Efeito da migração de composto antimicrobiano nas propriedades finais de selagem de filme poliolefínico

    Directory of Open Access Journals (Sweden)

    Márcia Pires

    2014-01-01

    Full Text Available Filmes base PELBD + PEBD contendo 5% de sorbato de potássio (SK foram preparados por extrusão plana. Os filmes com e sem SK foram caracterizados por calorimetria exploratória diferencial (DSC e fluorescência de Raios X por dispersão de comprimento de onda (WDXRF. O perfil de migração do SK foi acompanhado por FTIR/ATR e UV-Vis e sua influência na curva de selagem (hot tack dos filmes foi determinada. A adição de SK não causou alteração nas propriedades térmicas do polietileno na concentração estudada, porém a migração do SK para a superfície do filme interferiu na curva de selabilidade, atuando como uma impureza, causando diminuição da força de selagem em faixa de temperaturas mais baixas.

  20. Síntese do polipirrol com surfactantes aniônicos visando aplicações como absorvedores de micro-ondas

    Directory of Open Access Journals (Sweden)

    Regiane Aparecida Medeiros Campos

    2014-06-01

    Full Text Available Neste trabalho diferentes amostras de polipirrol (PPi foram sintetizadas variando a combinação dos oxidantes FeCl3 e Fe2(SO43 e dos surfactantes docecilbenzenosulfonato de sódio (DBSNa e ácido dodecilbenzenosulfônico (DBSA. Análises por espectroscopia na região do infravermelho não apresentam diferenças significativas na estrutura química das amostras de PPi sintetizadas. No entanto, análises termogravimétricas, de condutividade elétrica e de difração de raios X mostram que os surfactantes aniônicos favorecem a obtenção de amostras mais estáveis termicamente, condutoras e ordenadas cristalograficamente. Medidas de refletividade de blendas de PPi com resina epóxi, na faixa de 8 a 12 GHz, mostram valores de atenuação de micro-ondas de até 95% da radiação incidente.

  1. Mineralogical characterization of a highly-weathered soil by the Rietveld Method Caracterização mineralógica de um solo altamente intemperizado pelo Método de Rietveld

    Directory of Open Access Journals (Sweden)

    André Maurício Brinatti

    2010-08-01

    Full Text Available The mineralogical characterization through mineral quantification of Brazilian soils by X-ray diffraction data using the Rietveld Method is not common. A mineralogical quantification of an Acric Ferralsol from the Ponta Grossa region, state of Paraná, Brazil, was carried out using this Method with X-Ray Diffraction data to verify if this method was suitable for mineral quantification of a highly-weathered soil. The A, AB and B3 horizons were fractioned to separate the different particle sizes: clay, silt, fine sand (by Stokes Law and coarse sand fractions (by sieving, with the procedure free of chemical treatments. X-ray Fluorescence, Inductively Coupled Plasma Atomic Emission Spectrometry, Infrared Spectroscopy and Mössbauer Spectroscopy were used in order to assist the mineral identification and quantification. The Rietveld Method enabled the quantification of the present minerals. In a general way, the quantitative mineralogical characterization by the Rietveld Method revealed that quartz, gibbsite, rutile, hematite, goethite, kaolinite and halloysite were present in the clay and silt fractions of all horizons. The silt fractions of the deeper horizons were different from the more superficial ones due to the presence of large amounts of quartz. The fine and the coarse sand fractions are constituted mainly by quartz. Therefore, a mineralogical quantification of the finer fraction (clay and silt by the Rietveld Method was successful.A caracterização mineralógica por meio da quantificação dos minerais presentes em solos brasileiros por difração de raios X usando o Método de Rietveld é, ainda, pouco comum. Neste trabalho foi realizada a quantificação mineralógica de um Latossolo Vermelho ácrico da região de Ponta Grossa, Paraná, Brasil, utilizando o Método de Rietveld com dados de Difração de Raios X e também verificado se o método foi adequado na quantificação mineral de um solo altamente intemperizado. Os horizontes A

  2. Determination of structural geometric parameters of industrial ceramic foams by gamma rays transmission and X-rays microtomography; Determinacao de parametros geometricos estruturais de espumas ceramicas industriais por transmissao de raios gama e microtomografia de raios X

    Energy Technology Data Exchange (ETDEWEB)

    Rocha, Wilson Roberto Dejato da

    2005-07-01

    In this work, the gamma rays transmission and X-rays microtomography techniques are used for the evaluation of the porosity and the pore size distribution of SiC ceramic foams. It was also accomplished the three-dimensional images after the determination of samples geometric parameters. The geometric parameters were obtained by two-dimensional images analyses, generated by a Microfocus system, with a CCD camera, an images intensifier, a X-rays tube and an automatic system for rotation of the sample. The spatial resolution of the images was about 32 {mu}m. In the gamma rays transmission methodology, a Nal(Tl) scintillation detector, an {sup 241}Am (59.53 keV, 100 mCi) radioactive source and an automatic X-Z micrometric table was used. The analyzed samples had pores density of 30, 45, 60, 80 and 100 ppi (pores per inch). The gamma rays transmission technique was accurate to supply the porosity of the samples, which ranged about 90% and was in agreement with the values supplied by manufacturer of the foams. The 30 and 45 ppi samples analyzed by X-rays microtomography showed porosity results that agree with the average porosity supplied by the manufacturer. In other hand, the 60, 80 and 100 ppi samples systematically showed average porosity about 4%, lower than the average of the manufacturer. The pore size distributions found through the software IMAGO show the presence of smaller pores than those nominated by the manufacturer. The 30 ppi samples had voids inside the solid material of the ceramic foams structure. Gaussian truncated method, used in the three-dimensional reconstruction, was not able to take into the account the voids inside the solid matrix. (author)

  3. Criteria for grant with the bonus for working with X-rays or radioactive substances at a federal government university

    International Nuclear Information System (INIS)

    Moro, J. Tullio; Silva, Maria T.X.; Tessler, Jacques; Niederauer, Marco A.C.

    2011-01-01

    Aiming the actualization of the criteria used for grant the 'Gratificacao por trabalhos com Raios X ou substancias radioativas' at a federal government, the administration of personnel constituted a work staff formed by the Work Safety Division and by Radiological Protection Service of the Federal University of Rio Grande do Sul - Brazil. Based on the periodical evaluation of the safety and radiological protection at the work environment and the criteria study of legislation involved in the matter, the work staff established a set of criteria approaching the specificities of the activities developed with ionizing radiation generators at the environment of that University

  4. Nuclear magnetic resonance investigation of the local structure of (100-x)(Bi1/2Na1/2)TiO3-(x)BaTiO3 lead-free piezoelectric materials

    International Nuclear Information System (INIS)

    Braga Groszewicz, Pedro

    2016-01-01

    The main goal of the present work is to identify what local structure features are relevant to the electrical properties of BNT-xBT. For this purpose, samples with the formula (100-x)(Bi 1/2 Na 1/2 )TiO 3 -(x)BaTiO 3 and a barium content of 0<x<15 are investigated by means of NMR. The comparison of the quadrupole-perturbed NMR lines of BNT-xBT samples before and after electrical poling reveals the coexistence of phases with cubic and polar symmetries for the samples found in a relaxor state. The cubic portion vanishes when a ferroelectric state is induced, either by the application of an electric field or by composition changes. In the scope of this work it was found that the isotropic chemical shift of sodium corresponds to a fingerprint of the average rhombohedral or tetragonal symmetries, which occur macroscopically for BNT-xBT samples as a function of the barium content. In addition to that, a broad distribution of chemical shift values is observed. In the present study, the analysis of the quadrupolar coupling and the corresponding electric field gradient (EFG) reveals a further element of the structural disorder in BNT-xBT. Towards a deeper understanding of the local structure of BNT-xBT, NMR spectra of the demanding titanium isotopes 47 Ti and 49 Ti were acquired. Furthermore 23 Na spin-lattice (T 1 ) relaxation times in BNT-xBT samples are investigated as a function of temperature.

  5. Investigation on U - O - Na, Pu - O - Na and U,Pu - O - Na phase diagrams

    International Nuclear Information System (INIS)

    Pillon, S.

    1989-03-01

    The thermochemical interaction between the nuclear fuel (uranium and plutonium mixed oxides) and the sodium has been investigated and particularly the three phase diagrams: U - O - Na; Pu - O - Na; U,Pu - O - Na. High temperature neutron diffraction, microcalorimetry and powder X-ray diffraction were used for the characterization of the compounds synthetized. This study allowed to complete the knowledge about each of these diagrams and to measure some physical and thermal properties on the compounds. The limits on the modelization of the fuel-sodium interaction are discussed from the results of the UO 2 - Na reaction [fr

  6. Infrared coagulation: a preferred option in treating early hemorrhoids Coagulação por raios infravermelhos: opção preferencial para o tratamento de hemorróidas

    Directory of Open Access Journals (Sweden)

    Pravin J. Gupta

    2004-01-01

    Full Text Available BACKGROUND: The ideal therapy for hemorrhoids is always debated. For early grades of the disease, many different modalities of treatment have been proposed. Some are effective but are more painful, others are less painful but their efficacy is not assured on long term. Infrared photocoagulation has emerged as a new addition to the list. In this procedure, the tissue is coagulated by infrared radiation. During treatment, mechanical pressure and radiation energy are applied simultaneously to ablate the blood supply to the hemorrhoidal mass. METHODS: In the present retrospective study, the effect of infrared coagulation on patients with early grades of hemorrhoids is described. In a separate study, a comparison is made between Infrared coagulation and rubber band ligation in terms of their effectiveness and discomfort. RESULTS: 212 patients were treated by infrared coagulation and were followed up for a period of 18 months. Only 28 patients had persistence or recurrence of bleeding. Overall ratio of comfort and patient satisfaction from pain and bleeding was quite satisfactory. The comparative study showed that though rubber band ligation is more effective, it is a more painful procedure. CONCLUSION: These studies shows that Infrared coagulation for hemorrhoids in early stages could prove to be a easy and effective alternative to conventional methods as it is quick, less painful and safe. The procedure can be repeated in case of recurrence and should be considered as the first choice in early hemorrhoids.OBJETIVO: Mostrar os benefícios do uso dos raios infravermelhos como alternativa no tratamento de hemorróidas sangrantes, comparado a outras modalidades habitualmente utilizadas. MÉTODOS: 212 pacientes com hemorróidas sangrantes foram tratados com raios infravermelhos e foram acompanhados por período de 18 meses a fim de se observar os efeitos do procedimento. Comparou-se com outras modalidades usuais de tratamento. RESULTADOS: Apenas 28

  7. Photopeak efficiency response function of an underwater gamma-ray NaI(Tl) detector using MCNP-X

    International Nuclear Information System (INIS)

    Salgado, William L.; Silva, Ademir X.; Salgado, Cesar M.

    2015-01-01

    This work presents a study to calculate the response function of a 1.5″ x 1″ NaI(Tl) scintillation detector when it is used in the marine environment in the energy range from 20 keV to 662 keV. The method takes into account both the scattering of photons in the water and the detection mechanism of the detector. In addition, the calculation of the response function of the whole system is essential for suppressing the background of the measurement and for estimating the concentration of the involved radionuclides, especially given the greater probability of primary gamma photons undergoing multiple scattering events before they interact with the detector. The experimental photopeak efficiency measurements for point sources were compared with the simulated results under the same conditions of the experimental setup to validate the simulation of the detector. Monte Carlo simulations were performed using the MCNP-X code for the investigation of gamma-ray absorption in water in different brines. The energy resolution curve was used to improve the response of the mathematical simulation of the detector. The detector’s simulation was based on information obtained from the gammagraphy technique. Both dimensions and materials were used for the calculation with the MCNP-X code. The photopeak efficiency of a NaI(Tl) detector for different radionuclides in the aquatic environment with different salinities was calculated. (author)

  8. Strain Engineering of Ferroelectric Domains in KxNa1−xNbO3 Epitaxial Layers

    Directory of Open Access Journals (Sweden)

    Jutta Schwarzkopf

    2017-08-01

    Full Text Available The application of lattice strain through epitaxial growth of oxide films on lattice mismatched perovskite-like substrates strongly influences the structural properties of ferroelectric domains and their corresponding piezoelectric behavior. The formation of different ferroelectric phases can be understood by a strain-phase diagram, which is calculated within the framework of the Landau–Ginzburg–Devonshire theory. In this paper, we illustrate the opportunity of ferroelectric domain engineering in the KxNa1−xNbO3 lead-free material system. In particular, the following examples are discussed in detail: (i Different substrates (NdGaO3, SrTiO3, DyScO3, TbScO3, and GdScO3 are used to systematically tune the incorporated epitaxial strain from compressive to tensile. This can be exploited to adjust the NaNbO3 thin film surface orientation and, concomitantly, the vector of electrical polarization, which rotates from mainly vertical to exclusive in-plane orientation. (ii In ferroelectric NaNbO3, thin films grown on rare-earth scandate substrates, highly regular stripe domain patterns are observed. By using different film thicknesses, these can be tailored with regard to domain periodicity and vertical polarization component. (iii A featured potassium concentration of x = 0.9 of KxNa1−xNbO3 thin films grown on (110 NdScO3 substrates favors the coexistence of two equivalent, monoclinic, but differently oriented ferroelectric phases. A complicated herringbone domain pattern is experimentally observed which consists of alternating MC and a1a2 domains. The coexistence of different types of ferroelectric domains leads to polarization discontinuities at the domain walls, potentially enabling high piezoelectric responses. In each of these examples, the experimental results are in excellent agreement with predictions based on the linear elasticity theory.

  9. Análise por imagem digital dos níveis de cinza de fibras de reforço associadas a uma resina composta = Digital image analysis of the gray levels of reinforcement fibers associated with composite resin

    Directory of Open Access Journals (Sweden)

    Mussatto, Cristiane Maria Boniatti

    2005-01-01

    Full Text Available Mensurar a densidade óptica das fibras de reforço Connect, Ribbond e Interlig incluídas em resina composta Filtek Z250, no sistema DenOptix. Materiais e método: Foram confeccionados 10 blocos de resina composta associadas a cada tipo de fibra e dois blocos de resina Z250 pura (controle não-reforçado, totalizando 32 corpos-de-prova. Foram obtidas 3 radiografias digitais de cada corpo-de-prova, sobre uma placa óptica do sistema DenOptix, para cada posição: (A face lateral da fibra exposta aos raios -X; (B face tramada da fibra exposta aos raios-X. Em cada uma foram realizadas 3 leituras ópticas dos níveis de cinza em cada corpo-de-prova, em pontos aleatórios, sendo obtida uma média. Os valores médios dos níveis de cinza foram analisados pelo teste t de Student, ANOVA e teste de Tukey, ao nível de significância de 1%. Resultados e conclusões: Com relação à associação da resina + fibra na posição (A, observou-se a maior média de níveis de cinza para a resina pura, seguido por resina + Connect, resina + Interlig (que não diferiram entre si, e resina + Ribbond. Com relação à associação da resina + fibra na posição (B, observou-se que a resina pura apresentou maior média, seguida por resina + Connect, resina + Interlig e resina + Ribbond, sendo que as duas últimas não foram diferentes entre si. Os resultados sugerem que os níveis de cinza variaram em função do tipo de fibra de reforço e da posição na radiografia

  10. Novel protonated and hydrated n=1 Ruddlesden-Popper phases, HxNa1-xLaTiO4.yH2O, formed by ion-exchange/intercalation reaction

    International Nuclear Information System (INIS)

    Nishimoto, Shunsuke; Matsuda, Motohide; Miyake, Michihiro

    2005-01-01

    New derivatives of layered perovskite compounds with H 3 O + ions, H + ions and water molecules in the interlayer, H x Na 1-x LaTiO 4 .yH 2 O, were successfully synthesized by an ion-exchange/intercalation reaction with dilute HCl solution, using an n=1 member of Ruddlesden-Popper phase, NaLaTiO 4 . Powder X-ray diffraction revealed that the layered structure changed from space group P4/nmm with a=3.776(1) and c=13.028(5)A to I4/mmm with a=3.7533(3) and c=28.103(4)A after the ion-exchange/intercalation reaction at pH 5. The change of space group indicates that the perovskite layers are transformed from staggered to an eclipsed configuration through the ion-exchange/intercalation reaction. Thermogravimetric analysis and high-temperature powder X-ray diffraction suggested the existence of the secondary hydrated phase by dehydrating H x Na 1-x LaTiO 4 .yH 2 O at 100 o C

  11. Análise da confiabilidade e concordância dos métodos paquímetro e polpas digitais na mensuração da diástase do músculo reto abdominal

    Directory of Open Access Journals (Sweden)

    Ana Carolina Rodarti Pitangui

    2016-12-01

    Full Text Available Introdução: Métodos palpatórios como paquímetro e polpas digitais são técnicas clinicamente viáveis para determinar a diástase dos músculos retos abdominais. Objetivo: Avaliar a confiabilidade e a concordância dos métodos paquímetro e polpas digitais na mensuração da diástase do músculo reto abdominal no puerpério imediato. Métodos: Estudo descritivo do tipo transversal com mulheres no puerpério imediato. As medidas foram realizadas em momentos distintos por duas avaliadoras. Os pontos de referência para mensuração foram: três dedos (4,5 cm acima e abaixo da cicatriz umbilical e na região umbilical. A diástase foi graduada por meio do paquímetro e pelo número de dedos entre as bordas mediais dos músculos retos abdominais. Foi estimado um valor de 1,5 cm para cada dedo. Considerou-se presença de diástase quando ocorreu afastamento maior que 3 cm entre as bordas mediais dos retos abdominais. A análise estatística foi realizada pelo coeficiente de Kappa ponderado, para avaliação da concordância entre as técnicas, e pelo coeficiente de correlação intraclasse para avaliar a confiabilidade. Em todas as análises foi adotado nível de significância p<0,05. Resultados: Foram avaliadas 261 puérperas, com média de idade de 23,74±6,42 anos. Destas, 143 (54,8% eram primíparas e 118 (45,2% multíparas. Foram verificados valores excelentes na confiabilidade da técnica das polpas digitais e valores moderados com o uso do paquímetro. A concordância entre as duas técnicas demonstrou-se excelente. Conclusão: As duas técnicas, polpas digitais e paquímetro, revelaram-se instrumentos confiáveis e com concordância na mensuração da diástase do músculo reto abdominal.

  12. Esqueletogênese em punaré (Thrichomys laurentinus- Rodentia, Echimyidae

    Directory of Open Access Journals (Sweden)

    Phelipe O. Favaron

    Full Text Available Resumo: O objetivo deste estudo foi descrever o desenvolvimento do esqueleto do punaré (Thrichomys laurentinus. Para tanto, foram utilizados 11 embriões e 12 fetos em diferentes estágios de desenvolvimento, sendo divididos em 4 grupos de acordo com o período gestacional. As amostras foram obtidas no Centro de Multiplicação de Animais Silvestres da Universidade Federal Rural do Semi-Árido, Mossoró-RN, Brasil. Após fixados em formol (10% ou glutaraldeído (2,5%, foi realizada a analise morfológica com auxílio de lupa, sendo as características macroscópicas fotodocumentadas. Análises de raios-x e coloração por alizarina red foram realizadas para melhor compreensão do desenvolvimento ósseo. Nas análises de raio-x os embriões não apresentaram nenhuma radiopacidade, ao contrário dos fetos que apresentavam radiopacidade gradual ao longo dos grupos. No grupo II houve aumento de radiopacidade na região da coluna vertebral e das regiões mandibular e maxilar. No grupo III a radiopacidade estava aumentada nos membros pélvicos, nas costelas e na região frontal e no grupo IV nos membros torácicos e nas regiões occipital, temporal e frontal do crânio. Tais características foram confirmadas pelas analises histológicas e pela técnica de Alizarina Red. Com isso podemos concluir que o conhecimento acerca da embriologia do sistema ósseo normal é fundamental para o entendimento dos efeitos adversos causados pela nutrição e uso de drogas durante o desenvolvimento.

  13. Hundred years of X-ray discovery: a brief historical account. 1895-1995; Breve historico dos cem anos da descoberta dos raios-X: 1895-1995

    Energy Technology Data Exchange (ETDEWEB)

    Santin Filho, Ourides [Sao Paulo Univ., SP (Brazil). Inst. de Quimica

    1995-11-01

    This article gives a brief historical account of the discovery of X-rays, including early experiments of Roentgen, Barkla and Henry Bragg, followed by experiments leading to the discovery of X-ray diffraction by crystals, made by Max von Laue and Lawrence Bragg, which led to the discovery of ionic bonding in crystals. The steps in the study of X-ray spectroscopy by Moseley are also mentioned, and the correlation of his results with theories of Bohr and Rydberg, leading to the discovery of atomic number. Finally, the use of X-ray diffraction in structure determinations through Fourier transform is emphasized. (author). 35 refs., 7 figs.

  14. Search for a new X(16.7) boson and dark photons in the NA64 experiment at CERN

    CERN Document Server

    Banerjee, D.; Chumakov, A.G.; Cooke, D.; Crivelli, P.; Depero, E.; Dermenev, A.V.; Donskov, S.V.; Dusaev, R.R.; Enik, T.; Charitonidis, N.; Feshchenko, A.; Frolov, V.N.; Gardikiotis, A.; Gerassimov, S.G.; Gninenko, SN; Hösgen, M.; Jeckel, M.; Karneyeu, A.E.; Kekelidze, G.; Ketzer, B.; Kirpichnikov, D.V.; Kirsanov, M.M.; Konorov, I.V.; Kovalenko, S.G.; Kramarenko, V.A.; Kravchuk, L.V.; Krasnikov, N.V.; Kuleshov, S.V.; Lyubovitskij, V.E.; Lysan, V.; Matveev, V.A.; Mikhailov, Yu.V.; Peshekhonov, D.V.; Polyakov, V.A.; Radics, B.; Rojas, R.; Rubbia, A.; Samoylenko, V.D.; Tikhomirov, V.O.; Tlisov, D.A.; Toropin, A.N.; Trifonov, A.Yu.; Vasilishin, B.I.; Vasquez Arenas, G.; Volkov, P.V.; Volkov, V.; Ulloa, P.

    2018-06-09

    We report the first results on a direct search for a new 16.7 MeV boson (X) which could explain the anomalous excess of e+e- pairs observed in the excited 8Be* nucleus decays. Due to its coupling to electrons, the X could be produced in the bremsstrahlung reaction e-Z -> e-ZX by a 100 GeV e- beam incident on an active target in the NA64 experiment at the CERN SPS and observed through the subsequent decay into a e+e- pair. With 5.4x10^10 electrons on target no evidence for such decays was found, allowing to set first limits on the X-e- coupling in the range 1.3x10^-4 e+e- of the bremsstrahlung A' with a mass < 23 MeV.

  15. Influência do método de síntese no processo de pilarização com titânio de uma esmectita da região amazônica Influence of the synthesis method on the process of pillarization of smectite from the amazonic region with titanium

    Directory of Open Access Journals (Sweden)

    D. L. Guerra

    2006-12-01

    Full Text Available Amostras de argila esmectítica provenientes do município de Serra Madureira no Estado do Acre foram utilizadas no processo de pilarização. As matrizes natural e pilarizada foram caracterizadas por difração de raios X, espectroscopia no infravermelho com transformada de Fourier, análises térmicas diferencial e gravimétrica, microscopia eletrônica de varredura, espectroscopia de raios X por energia dispersiva e análise textural. As soluções pilarizantes de titânio, Ti(OC2H54 e TiCl4, foram analisadas por espectroscopia no infravermelho com transformada de Fourier. O íon intercalante foi obtido através da reação química entre as soluções de Ti(OC2H54 e HCl na proporção aproximada de HCl/Ti=1 e soluções de TiCl4 em reação com etanol com relação Ti/argila= 25 mmol Ti/g. A intercalação da notronita foi efetuada utilizando-se de dois métodos: com a solução de acido clorídrico incorporada paulatinamente na solução de etóxido de titânio, e utilizando o cloreto de titânio em solução de etanol, com vigorosa agitação a 25 ºC durante 3 h e com calcinação a 450 ºC e 600 ºC. Os resultados de difração de raios X do processo de pilarização mostraram alterações no espaçamento basal de 15,30 Å para 18,76 Å, e na área de superfície específica de 44,37 m²/g para 188,72 m²/g. A estabilidade térmica da argila natural foi otimizada com o processo de pilarização.Smectite clays of the State of Acre, Brazil, were used for the pillarization process. The natural and pillarized matrices were characterized by X-ray diffraction, Fourier transform infrared spectroscopy (FTIR, thermal analysis, scanning electron microscopy, energy dispersive spectroscopy and textural analysis. The titanium pillarized solutions Ti(OC2H54 and TiCl4 were analyzed by FTIR. The intercalation ion was obtained by reacting Ti(OC2H54 with HCl (HCl/Ti ~ 1 and TiCl4 with ethanol (Ti/clay ~ 25 mmol Ti/g. The notronite intercalation was

  16. A produção de raios X contextualizada por meio do enfoque CTS: um caminho para introduzir tópicos de FMC no ensino médio The production of X ray contextualized by means of STS approach: a way to insert topics of FMC in high school

    Directory of Open Access Journals (Sweden)

    Adão José de Souza

    2010-05-01

    Full Text Available Neste trabalho investigamos a inserção de tópicos de Física Moderna para alunos do Ensino Médio, abordando radiações eletromagnéticas e a produção de raios X, sua aplicação como diagnóstico médico e possíveis formas de proteção radiológica, contribuindo para a atualização curricular do Ensino de Física, por meio de uma abordagem interdisciplinar com as áreas de Matemática e Biologia. A metodologia fundamenta-se na Aprendizagem Significativa e no Educar pela Pesquisa, empregando ainda o enfoque Ciência, Tecnologia e Sociedade (CTS e contemplando aspectos da Aprendizagem Centrada em Eventos (ACE. Para isso, consideramos elementos essenciais como o levantamento de conhecimentos prévios dos alunos e a realização de pesquisas e consultas em periódicos, realização de relatórios e seminários, além da exposição de cartazes. Como resultado, promovemos a aprendizagem empregando uma concepção cidadã de Educação contextualizando os conceitos físicos, contribuindo para que os estudantes compreendam conceitos científicos úteis para o entendimento de fenômenos naturais que apresentam implicações re-levantes para a sua vida, permitindo que se posicionem perante questões tecnológicas e científicas. As respostas dos alunos ao final da pesquisa indicam que a aprendizagem conceitual se efetivou estruturada no aprender a aprender, que ampliou a sua autonomia de ação e de pensamento. Os resultados indicam ainda que a intervenção proporcionou grande interação entre os alunos e o professor, possibilitou intensos e ricos momentos de debates e reflexões, permitindo introduzir importantes tópicos de Física Moderna.In this work we investigate the insertion of topics of Modern Physics for high school students, by dealing with electromagnetic radiations and the production of X rays, its application as medical diagnosis and possible forms of radiological protection. We attempt to update the physics curriculum through

  17. Análise histoquímica das glândulas anexas do aparelho reprodutor do macho de paca (Cuniculus paca

    Directory of Open Access Journals (Sweden)

    Aretuza C. Capalbo

    Full Text Available RESUMO: A paca (Cuniculus paca é um roedor típico de regiões tropicais. Com a finalidade de estudar esta espécie selvagem para manejo adequado e sua preservação, objetivou-se neste trabalho caracterizar a histoquímica das glândulas anexas do trato reprodutor do macho da paca. Para este fim, cortes histológicos dessas glândulas foram submetidas às reações histoquímicas com Ácido Periódico de Schiff (PAS, Alcian blue (AB, PAS. + AB. e PAS + Amilase. Na glândula bulbouretral foi constatado que o epitélio produz secreção rica em glicoproteínas neutras e ácidas, glicosaminoglicanas, e em algumas regiões produz mais de um tipo de secreção. Não foi observada a presença de glicogênio no epitélio. Na glândula vesicular, seu epitélio em borda em escova corou-se por glicoproteínas neutras e também por substância de composição desconhecida, não contendo glicoproteínas ácidas, glicogênio ou glicosaminoglicanas. Verificou-se presença de pequena quantidade de glicoproteínas ácidas e neutras na próstata, em especial na mucosa, além de glicoproteínas ácidas carboxiladas e sulfatadas em pequena quantidade no tecido conjuntivo da lâmina própria dessa glândula. Por fim, a glândula coaguladora apresentou pequena quantidade de glicoproteínas neutras na borda em escova de seu epitélio e substância de composição desconhecida, sendo ausente o glicogênio. Conclui-se que as glândulas anexas do trato reprodutor da paca apresentam características histoquímicas que compartilham certa similaridade com outras espécies da ordem Rodentia, com a presença de glicoproteínas neutras e ácidas em algumas glândulas, principalmente no epitélio da glândula bulbouretal e na borda em escova do epitélio das demais glândulas.

  18. Síntese de MgAl2O4 por combustão assistida por micro-ondas: influência dos parâmetros de síntese na formação e na estrutura cristalina

    Directory of Open Access Journals (Sweden)

    R. L. B. A. Medeiros

    Full Text Available Resumo Nos últimos anos a técnica de combustão assistida por micro-ondas vem recebendo uma atenção especial, por ser uma técnica rápida, de baixo custo e de fácil manuseio, que permite obter materiais com boa homogeneidade química. O aluminato de magnésio (MgAl2O4 é um dos mais bem conhecidos materiais cerâmicos devido às suas excelentes propriedades, como alto ponto de fusão, elevada resistência mecânica em altas temperaturas, boa resistência ao choque térmico e resistência a ácidos e bases. O propósito deste trabalho é avaliar a influência da razão combustível/oxidante (Rco, temperatura de calcinação (Tcal e da potência do micro-ondas (Pmic na formação e na estrutura cristalina do MgAl2O4. Para realizar a reação de combustão foram utilizadas três potências (450, 675 e 900 W e três razões combustível/oxidante (0,8:1, 1:1 e 1,2:1. O material foi calcinado em três temperaturas (700, 800 e 900 ºC e foram realizadas análises de difração de raios X e microscopia eletrônica por varredura. Um planejamento fatorial 23 foi utilizado para avaliar a influência da Rco, Tcal e Pmic nos parâmetros como a cristalinidade e o tamanho de cristalito. Os resultados mostram que para os MgAl2O4 sintetizados com Rco maiores que 1:1 e Pmic menores que 675 W são obtidos tamanhos de cristalito entre 10 e 20 nm quando calcinados a 700 e 800 ºC. Com relação ao grau de cristalinidade, somente a Tcal exerce uma influência significativa.

  19. Análise de Imagens Médicas através de Sistemas Computacionais Inteligentes para Apoio ao Diagnóstico Clínico

    Directory of Open Access Journals (Sweden)

    Anderson Alvarenga de Moura Meneses

    2015-07-01

    Full Text Available Histomorfometria óssea é uma importante análise na prevenção e tratamento de câncer e osteoporose,fornecendo informação quantitativa para diagnóstico clínico. A MicrotomografiaComputadorizada por Raios X é uma técnica de imagens não-destrutiva e não-invasiva comuma alta resolução que permite imagens ampliadas. Na análise histomorfométrica de tais imagens,é possível usar técnicas de tratamento tais como filtros morfológicos e binarização. Taistécnicas, no entanto, podem causar perda de informação relevante para a quantificação damassa óssea. Neste trabalho é descrita a aplicação de Redes Neurais Artificiais (RNA parareconhecimento de tecido ósseo como parte de uma pesquisa sobre análise histomorfométricaem imagens cuja aquisição foi feita no Laboratório ELETTRA, em Trieste, Itália, na linha depesquisa SYRMEP (Synchrotron Radiation for Medical Physics – Radiação Síncrotron paraFísica Médica. Nestes testes iniciais, uma RNA Perceptron Multi-Camadas (PMC Feed-Forward (FF com algoritmo de aprendizagem de Retro-Propagação de Erro foi utilizada natarefa de reconhecimento. A qualidade dos resultados na tarefa da classificação de subimagensfoi verificada através de Curvas ROC (Receiver Operating Characteristic. Para este tipo deRNA obtivemos uma area sob a curva de 1,000, o que significa que a arquitetura e o treinamentoda RNA se mostraram adequados para a tarefa de reconhecimento de tecido ósseo. As imagensobtidas também são mostradas neste trabalho. Os resultados dos testes demonstraram aviabilidade de aplicação metodológica de Redes Neurais Artificiais e sua adequação às característicasdas imagens obtidas por Microtomografia Computadorizada por Raios X, para evitar perdas ocasionadas por outras técnicas de manipulação e tratamento de imagens. Tambémapresentamos uma breve descrição das principais tecnologias de implementação do projeto.

  20. Phase structure, dielectric, and piezoelectric properties of (K{sub 0.94-x}Na{sub x}Li{sub 0.06})(Nb{sub 0.94}Sb{sub 0.06})O{sub 3} lead-free ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Fu, Lingling; Lin, Dunmin; Zheng, Qiaoji; Wu, Xiaochun; Xu, Chenggang [College of Chemistry and Materials Science, and Visual Computing and Virtual Reality Key Laboratory of Sichuan Province, Sichuan Normal University, Chengdu 610066 (China)

    2012-11-15

    Lead-free piezoelectric ceramics (K{sub 0.94-x}Na{sub x}Li{sub 0.06})(Nb{sub 0.94}Sb{sub 0.06})O{sub 3} have been fabricated by a conventional ceramic technique and the effects of K{sup +}/Na{sup +} ratio on the structure and piezoelectric properties of the ceramics have been studied. All the ceramics possess a pure perovskite structure. The coexistence of tetragonal and orthorhombic phases is formed at room temperature in the ceramics with 0.45 {<=} x {<=} 0.55. The tetragonal-orthorhombic phase-transition temperature T{sub O-T} decreases from 110 to 54 C with x increasing from 0.35 to 0.55 and then increases from 84 to 144 C with x further increasing from 0.6 to 0.7, while the Curie temperature T{sub C} deceases from 388 to 348 C with x increasing from 0.35 to 0.70. Because of the coexistence of the two phases near room temperature, the ceramics with x = 0.50 exhibit the optimum piezoelectric properties: d{sub 33} = 230 pC/N and k{sub p} = 49%. The ceramics possess good time stability of piezoelectric properties. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  1. Melting Behavior and Thermolysis of NaBH4−Mg(BH42 and NaBH4−Ca(BH42 Composites

    Directory of Open Access Journals (Sweden)

    Morten B. Ley

    2015-04-01

    Full Text Available The physical properties and the hydrogen release of NaBH4–Mg(BH42 and NaBH4−Ca(BH42 composites are investigated using in situ synchrotron radiation powder X-ray diffraction, thermal analysis and temperature programmed photographic analysis. The composite, xNaBH4–(1 − xMg(BH42, x = 0.4 to 0.5, shows melting/frothing between 205 and 220 °C. However, the sample does not become a transparent molten phase. This behavior is similar to other alkali-alkaline earth metal borohydride composites. In the xNaBH4–(1 − xCa(BH42 system, eutectic melting is not observed. Interestingly, eutectic melting in metal borohydrides systems leads to partial thermolysis and hydrogen release at lower temperatures and the control of sample melting may open new routes for obtaining high-capacity hydrogen storage materials.

  2. Caracterização de materiais cerâmicos à base de CuCr 2 O 4 preparados pelo método da reação de combustão em solução para uso como pigmentos

    Directory of Open Access Journals (Sweden)

    M. B. M. Coelho

    Full Text Available Resumo Pós cerâmicos à base de CuCr2O4 foram preparados pelo método da reação de combustão em solução a partir da calcinação no intervalo de 500 a 1100 °C, tendo por finalidade a aplicação destes como pigmento cerâmico. O estudo das propriedades estruturais, morfológicas, químicas e ópticas foi realizado por meio das técnicas de difração de raios X, refinamentos pelo método de Rietveld, microscopia eletrônica de varredura com canhão de elétrons por emissão de campo, fluorescência de raios X, reflectância difusa e coordenadas colorimétricas L*, a*, b* com base no método CIEL*a*b*. Os pós sintetizados foram misturados com vidrados mate e transparente e aplicados em matrizes cerâmicas. Os resultados mostraram que ao aumentar a temperatura ocorreu a conversão da fase cromita, na qual foram observados poliedros regulares, em delafossita, que apresentou morfologia em forma de placas hexagonais. A reflectância mostrou a formação de pós com tonalidade escura, corroborados pelos dados das coordenadas colorimétricas. Os pós sintetizados exibiram capacidade pigmentante de coloração verde, quando incorporados nos vidrados cerâmicos.

  3. Growth and characterization of thin oriented Co{sub 3}O{sub 4} (111) films obtained by decomposition of layered cobaltates Na{sub x}CoO{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Buršík, Josef, E-mail: bursik@iic.cas.cz [Institute of Inorganic Chemistry of the Academy of Sciences of the Czech Republic, v.v.i., 250 68, Husinec-Řež 1001 (Czech Republic); Soroka, Miroslav, E-mail: soroka@iic.cas.cz [Institute of Inorganic Chemistry of the Academy of Sciences of the Czech Republic, v.v.i., 250 68, Husinec-Řež 1001 (Czech Republic); Kužel, Radomír, E-mail: kuzel@karlov.mff.cuni.cz [Faculty of Mathematics and Physics, Charles University in Prague, Ke Karlovu 5, 121 16 Praha 2 (Czech Republic); Mika, Filip, E-mail: filip.mika@isibrno.cz [Institute of Scientific Instruments, Academy of Sciences of the Czech Republic, v.v.i., Královopolská 147, 612 64 Brno (Czech Republic)

    2015-07-15

    The formation and structural characterization of highly (111)-oriented Co{sub 3}O{sub 4} films prepared by a novel procedure from weakly (001)-oriented Na{sub x}CoO{sub 2} is reported. The Na{sub x}CoO{sub 2} films were deposited on both single crystal and amorphous substrates by chemical solution deposition (CSD) method and crystallized at 700 °C. Subsequently they were transformed into (111)-oriented Co{sub 3}O{sub 4} phase during post-growth annealing at 900 °C. The degree of preferred orientation in Co{sub 3}O{sub 4}, which was determined by phi-scan and pole figure measurements, depends on the content of Na in the starting Na{sub x}CoO{sub 2} phase. Surface morphology of the films was investigated using electron microscopy and atomic force microscopy. - Graphical abstract: Structure of growth twins and possible O{sup 2−} stacking sequences in (111)-oriented Co{sub 3}O{sub 4} thin films on α-Al{sub 2}O{sub 3}(001) prepared by chemical solution deposition through the transformation of (001)-oriented Na{sub x}CoO{sub 2} thin film. - Highlights: • Single phase Co{sub 3}O{sub 4} thin films was prepared by means of chemical solution deposition. • Conditions for γ-Na{sub x}CoO{sub 2} to Co{sub 3}O{sub 4} transformation were optimized. • Growth twinning of Co{sub 3}O{sub 4} films due to two possible O{sup 2−} stacking sequences. • Growth with (pseudo)epitaxial relation Co{sub 3}O{sub 4} (111)[−121]//α-Al{sub 2}O{sub 3} (001)[10−10].

  4. Addendum to the NA64 Proposal: Search for the $A'\\to invisible$ and $X\\to e^+e^-$ decays in 2021

    CERN Document Server

    Gninenko, Sergei

    2018-01-01

    The experiment NA64 is aimed at a direct search for sub-GeV vector mediator $A'$ of Dark Matter production in invisible $A'$ decay mode. Another goal is to search for of a new light $X$ boson, which could explain a recently observed excess of $\\ee$ events from excited $^8$Be transitions. The NA64 Collaboration requests to carry out further both searches with the H4 electron beam in the year 2021 and beyond.

  5. Optimization and kinetics decomposition of monazite using NaOH

    International Nuclear Information System (INIS)

    MV Purwani; Suyanti; Deddy Husnurrofiq

    2015-01-01

    Decomposition of monazite with NaOH has been done. Decomposition performed at high temperature on furnace. The parameters studied were the comparison NaOH / monazite, temperature and time decomposition. From the research decomposition for 100 grams of monazite with NaOH, it can be concluded that the greater the ratio of NaOH / monazite, the greater the conversion. In the temperature influences decomposition 400 - 700°C, the greater the reaction rate constant with increasing temperature greater decomposition. Comparison NaOH / monazite optimum was 1.5 and the optimum time of 3 hours. Relations ratio NaOH / monazite with conversion (x) following the polynomial equation y = 0.1579x 2 – 0.2855x + 0.8301 (y = conversion and x = ratio of NaOH/monazite). Decomposition reaction of monazite with NaOH was second orde reaction, the relationship between temperature (T) with a reaction rate constant (k), k = 6.106.e - 1006.8 /T or ln k = - 1006.8/T + 6.106, frequency factor A = 448.541, activation energy E = 8.371 kJ/mol. (author)

  6. Investigation of sodalites for conditioning halide salts (NaCl and NaI): Comparison of two synthesis routes

    Energy Technology Data Exchange (ETDEWEB)

    Bardez, Isabelle; Campayo, Lionel; Rigaud, Danielle; Chartier, Myriam; Calvet, Aurelie [CEA, Laboratoire d' Etudes des Materiaux Ceramiques pour le Conditionnement, Site de Marcoule, Batiment 208, B.P. 17171, 30207 Bagnols sur Ceze cedex (France)

    2008-07-01

    Sodalites with the general formula Na{sub 8}Al{sub 6}Si{sub 6}O{sub 24}X{sub 2} (where X = Cl or I) were investigated for ceramic conditioning of halide salts (NaCl and NaI). Because of the tendency of halides to volatilize at high temperature, two synthesis routes were tested to optimize the halide content in the sodalite phase. The first is based on heating at high temperature of a [nepheline NaAlSiO{sub 4} + salt] mixture prepared by a dry process. The second, performed at low temperature, consists of the reaction in aqueous media between kaolinite (Al{sub 2}Si{sub 2}O{sub 5}(OH){sub 4}), sodium hydroxide (NaOH) and the salt. The present study compares these two syntheses and examines differences between chloro-sodalite and iodo-sodalite based on X-ray diffraction and infrared spectroscopy. The next step will consist in sintering the resulting powder samples to obtain dense ceramics. (authors)

  7. Objective quantification of pulmonary effects in X-ray chest images; Quantificacao objetiva das sequelas pulmonares em imagens de raios-X de torax

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Marcela de; Giacomini, Guilherme; Alvarez, Matheus; Pereira, Paulo M.C.; Ribeiro, Sergio M.; Pina, Diana R. de [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Botucatu, SP (Brazil)

    2016-07-01

    Tuberculosis (TB) is an infectious lung disease of great concern worldwide. Even after treatment, TB leaves pulmonary sequelae that compromise the quality of life of patients. The exam of diagnostic imaging done more frequently is the X-ray chest. The evaluation of pulmonary involvement of these patients is performed visually by the radiologist. The detection and quantification aided by computer systems are of great importance for the more accurate assessment of pulmonary involvement. The objective of this study was to evaluate computationally the reduction of lung damage in X-ray of chest in patients treated with two different medication regimens. (author)

  8. Guia de identificação dos ninhos de vespas sociais (Hymenoptera, Vespidae, Polistinae na Reserva Ducke, Manaus, Amazonas, Brasil

    Directory of Open Access Journals (Sweden)

    Alexandre Somavilla

    2012-12-01

    Full Text Available Vespidae sociais utilizam principalmente material vegetal para a elaboração de seus ninhos. Embora existam alguns estudos referentes à fauna de vespas na região Amazônica, nenhum trabalho trata exclusivamente dos ninhos. Além disso, nas coleções biológicas poucos são os ninhos tombados, devido principalmente à fragilidade e difícil conservação dos mesmos. O objetivo desse trabalho foi o conhecimento de alguns ninhos encontrados na Reserva Ducke, apresentando informações a respeito dos mesmos e uma chave de identificação dos gêneros. Os ninhos foram coletados através da busca direta, percorrendo os transectos da grade do Programa de Pesquisa em Biodiversidade; locais como margens de igarapés, bordas de acampamentos e construções na sede da reserva também foram explorados. Para todos os ninhos obteve-se o registro fotográfico e a localização exata por GPS. Foram registrados 39 ninhos de vespas sociais alocados em 17 espécies de Polistinae: Agelaia constructor, A. pallipes, Angiopolybia pallens, Apoica pallens, Metapolybia unilineata, Mischocyttarus lecointei, M. saturatus, Polybia bistriata, P. dimidiata, P. jurinei, P. liliacea, P. occidentalis, P. procellosa, P. rejecta, Protopolybia bituberculata, P. chartergoides e Synoeca virginea. Cinco ninhos desabitados de Mischocyttarus, Polybia e Polistes também foram coletados.

  9. ESTIMATIVA DA FRAGMENTAÇÃO FLORESTAL NA MICROBACIA SEPOTUBINHA, NOVA MARILÂNDIA – MT, NOS ANOS DE 1990 E 2014

    Directory of Open Access Journals (Sweden)

    Edson Viana Massoli

    2016-12-01

    Full Text Available A fragmentação florestal é um dos principais fatores que afetam a sustentabilidade dos recursos naturais, da biodiversidade e, consequentemente, da qualidade de vida da sociedade. Considerando isso, o objetivo deste estudo foi avaliar a fragmentação florestal na microbacia Sepotubinha, entre os anos de 1990 e 2014, utilizando as métricas da paisagem. Realizou-se um mapeamento dos fragmentos florestais, com base em uma classificação supervisionada de imagens do satélite Landsat. Os resultados obtidos demonstram que houve uma redução de 42% da Floresta original. Observou-se também uma redução de 39,26% de área nuclear de habitat e uma expressiva mudança na forma dos fragmentos, apresentando geometrias mais susceptíveis ao efeito de borda.O isolamento dos fragmentos foi o aspecto da paisagem menos afetado com o processo de desmatamento, uma vez que o retalhamento dos fragmentos grandes em vários de menor tamanho reduziu a distância média entre eles. Sugere-se que estudos futuros produzam informações sobre os processos ecológicos na microbacia Sepotubinha, pois desta forma será possível entender a relação padrão espacial e processos ecológicos, e assim produzir informações de maior valia para gestão ambiental da paisagem.

  10. Identification of human breast pathologies by X-ray elastic scattering; Identificacao de patologias mamarias atraves do espalhamento elastico de raios X

    Energy Technology Data Exchange (ETDEWEB)

    Conceicao, Andre L.C.; Antoniassi, Marcelo; Poletti, Martin E., E-mail: andre_conceicao@yahoo.com.b [Universidade de Sao Paulo (FFCLRP/USP), Ribeirao Preto, SP (Brazil). Faculdade de Filosofia, Ciencias e Letras. Dept. de Fisica e Matematica

    2011-07-01

    In this paper we determine the scattering profiles of normal, benign and malignant human breast samples in a momentum transfer range of 0.07nm{sup -1} {<=}q{<=}70.55nm{sup -1}, resulted from combining WAXS (wide angle x-ray scattering) and SAXS (small angle x-ray scattering) data. The results showed considerable differences between the scattering profiles of each tissue type. Based on this fact, some parameters, representing structural features, were extracted from these scattering profiles and submitted to a discriminant analysis. From statistical analysis, the ratio between the peak intensities at q=19.8nm{sup -1} and q=13.9nm{sup -1} and the intensity of third order axial collagen peak arose as two potentials breast tissue classifiers and, from combining them it was possible differentiate among normal, benign and malignant lesions. (author)

  11. [A double confinement. The current situation inside the Psychiatric Forensic Unit # 20 of the Hospital "J. T. Borda" of Buenos Aires City].

    Science.gov (United States)

    Guilis, Graciela; Amendolaro, Roxana; Del Do, Adelqui; Wikinski, Mariana; Sobredo, Laura

    2006-01-01

    Imprisonment of offenders with mental disorders in special psychiatric units constitutes a practice expected to satisfy both the legal and medical needs of prisoners. However, the actual conditions in which this practice takes place frequently hinders its purpose. In this work we describe the observations made by members of a Human Right Organization' Mental Health Team, the Centro de Estudios Legales y Sociales (CELS) (Legal and Social Studies Centre), in the Psychiatric Unit of the J. T. Borda Hospital, in Buenos Aires, Argentina. Observations were carried on in three visits performed by a group of psychologists, psychiatrists and lawyers. Visitors interviewed patients and examined the buildings and other material conditions to which patients are submitted. Interviews always took place in front of the guardians. From the interviews and the examination of the installations it can be concluded that: a) patients lack systematic diagnostic and treatment, and b) severe violations to their human rights were documented. So, the imprisonment conditions preclude any therapeutic intervention. The international legislation related to this special clinical and legal situation is revised ant the concepts of "penal state", "control societies" and "total institutions" are discussed.

  12. Synthesis of calcium-phosphate and chitosan bioceramics for bone regeneration

    Directory of Open Access Journals (Sweden)

    MELLATIE R. FINISIE

    2001-12-01

    Full Text Available Bioceramic composites were obtained from chitosan and hydroxyapatite pastes synthesized at physiological temperature according to two different syntheses approaches. Usual analytical techniques (X-ray diffraction analysis, Fourier transformed infrared spectroscopy, Thermo gravimetric analysis, Scanning electron microscopy, X-ray dispersive energy analysis and Porosimetry were employed to characterize the resulting material. The aim of this investigation was to study the bioceramic properties of the pastes with non-decaying behavior from chitosan-hydroxyapatite composites. Chitosan, which also forms a water-insoluble gel in the presence of calcium ions, and has been reported to have pharmacologically beneficial effects on osteoconductivity, was added to the solid phase of the hydroxyapatite powder. The properties exhibited by the chitosan-hydroxyapatite composites were characteristic of bioceramics applied as bone substitutes. Hydroxyapatite contents ranging from 85 to 98% (w/w resulted in suitable bioceramic composites for bone regeneration, since they showed a non-decaying behavior, good mechanical properties and suitable pore sizes.Compósitos biocerâmicos foram obtidos a partir de pastas de quitosana e hidroxiapatita, preparadas a temperatura fisiológica seguindo dois métodos diferentes de síntese. As técnicas analíticas usuais (Análise de difração de raios-X, Espectroscopia de absorção no infravermelho com transformada de Fourier, Análise termogravimétrica, Microscopia eletrônica de varredura, Análise por energia dispersiva de raios-X, e Porosimetria foram empregadas para caracterizar o material resultante. O objetivo deste trabalho foi estudar as propriedades biocerâmicas das pastas relativas ao comportamento de não-desintegração dos compósitos de quitosana-hidroxiapatita. A quitosana, que também forma um gel insolúvel em água na presença de íons cálcio, e tem mostrado possuir efeitos farmacologicamente ben

  13. Coexistence of superconductivity and magnetism in Ca{sub 1-x}Na{sub x}Fe{sub 2}As{sub 2}. Universal suppression of the magnetic order parameter in 122 iron pnictides

    Energy Technology Data Exchange (ETDEWEB)

    Materne, Philipp; Kamusella, Sirko; Sarkar, Rajib; Klauss, Hans-Henning [IFP, TU Dresden, 01062 Dresden (Germany); Harnagea, Luminita [IFW Dresden, Postfach 270016, 01171 Dresden (Germany); Wurmehl, Sabine; Buechner, Bernd [IFP, TU Dresden, 01062 Dresden (Germany); IFW Dresden, Postfach 270016, 01171 Dresden (Germany); Luetkens, Hubertus [PSI, 5232 Villigen (Switzerland); Timm, Carsten [ITP, TU Dresden, 01062 Dresden (Germany)

    2016-07-01

    We examined Ca{sub 1-x}Na{sub x}Fe{sub 2}As{sub 2} single crystals with x=0.00, 0.35, 0.50, and 0.67 by means of muon spin relaxation and Moessbauer spectroscopy to investigate the electronic and structural properties of these compounds. CaFe{sub 2}As{sub 2} is a semimetal, which shows spin density wave order below 167 K. By hole doping via Ca→Na substitution, the magnetic order is suppressed and superconductivity emerges with T{sub c}∼34K at optimal doping including a substitution level region where both phases coexist. We have studied the interplay of order parameters in this coexistence region and found nanoscopic coexistence of both order parameters. This is proven by a reduction of the magnetic order parameter by 7% below the superconducting transition temperature. We present a systematic correlation between the reduction of the magnetic order parameter and the ratio of the transition temperatures, T{sub c}/T{sub N}, for the 122 family of the iron-based superconductors.

  14. Crystalline phase of sodium germanate system determined by x-ray diffraction and 23Na magic angle spinning nuclear magnetic resonance

    International Nuclear Information System (INIS)

    Hussin, R.; Holland, D.; Dupree, R.

    2000-01-01

    Crystalline products of sodium germanate glasses system with composition from 10 mol% to 50 mol% Na 2 O have been investigated using 23 Na magic angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy and x-ray diffraction (XRD). Fitting of the 23 Na NMR spectra of the crystalline phases concerning different crystallographically sodium atom in sodium germanate system are reasonably reproducible as observed by the spectra obtained. The line shape simulations of the 23 Na NMR spectra yielded NMR quadrupolar parameters such as nuclear quadrupole coupling constants (C Q ), asymmetry parameters (η), and isotropic chemical shifts (δ i ). 23 Na NMR isotropic chemical shift may also provide further information on the structural environment of the sodium atom. A simple correlation between structure and NMR parameters to be tested can be used to probe the structure of sodium germanate glasses. The experimental 23 Na chemical shifts correlate well with an empirical shift parameter based on the total oxygen-cation bond valence and Na-O distances of all oxygen atoms in the first coordination sphere of the sodium cation. In this study the different phases in the sodium germanate system were identified. These results show that 23 Na NMR can provide examples of the types of structural information for sodium germanate system. (Author)

  15. Scanning ion-selective electrode technique and X-ray microanalysis provide direct evidence of contrasting Na+ transport ability from root to shoot in salt-sensitive cucumber and salt-tolerant pumpkin under NaCl stress.

    Science.gov (United States)

    Lei, Bo; Huang, Yuan; Sun, Jingyu; Xie, Junjun; Niu, Mengliang; Liu, Zhixiong; Fan, Molin; Bie, Zhilong

    2014-12-01

    Grafting onto salt-tolerant pumpkin rootstock can increase cucumber salt tolerance. Previous studies have suggested that this can be attributed to pumpkin roots with higher capacity to limit the transport of Na(+) to the shoot than cucumber roots. However, the mechanism remains unclear. This study investigated the transport of Na(+) in salt-tolerant pumpkin and salt-sensitive cucumber plants under high (200 mM) or moderate (90 mM) NaCl stress. Scanning ion-selective electrode technique showed that pumpkin roots exhibited a higher capacity to extrude Na(+), and a correspondingly increased H(+) influx under 200 or 90 mM NaCl stress. The 200 mM NaCl induced Na(+)/H(+) exchange in the root was inhibited by amiloride (a Na(+)/H(+) antiporter inhibitor) or vanadate [a plasma membrane (PM) H(+) -ATPase inhibitor], indicating that Na(+) exclusion in salt stressed pumpkin and cucumber roots was the result of an active Na(+)/H(+) antiporter across the PM, and the Na(+)/H(+) antiporter system in salt stressed pumpkin roots was sufficient to exclude Na(+) X-ray microanalysis showed higher Na(+) in the cortex, but lower Na(+) in the stele of pumpkin roots than that in cucumber roots under 90 mM NaCl stress, suggesting that the highly vacuolated root cortical cells of pumpkin roots could sequester more Na(+), limit the radial transport of Na(+) to the stele and thus restrict the transport of Na(+) to the shoot. These results provide direct evidence for pumpkin roots with higher capacity to limit the transport of Na(+) to the shoot than cucumber roots. © 2014 Scandinavian Plant Physiology Society.

  16. Caracterização de pigmentos inorgânicos à base de Fe, Zn e Cr utilizando resíduo de galvanoplastia como matéria-prima Characterization of Fe-, Zn- and Cr-based inorganic pigments using galvanic solid waste

    Directory of Open Access Journals (Sweden)

    K. W. Milanez

    2005-06-01

    Full Text Available O lodo proveniente do tratamento de efluentes do processo de galvanoplastia tem recebido particular atenção devido à natureza de sua constituição baseada em metais alcalinos e de transição. O descarte ou estocagem inadequada deste resíduo poderá causar danos ao meio ambiente e a saúde. Este trabalho propõe uma alternativa para a inertização dos resíduos galvânicos incorporando-os na formulação de pigmentos inorgânicos. Para a incorporação do lodo na formulação dos pigmentos inorgânicos, este foi caracterizado por técnicas de análise química elementar como fluorescência de raios X e espectroscopia de absorção atômica, e por meio de técnicas como termogravimétricas e difração de raios X. Após a caracterização do resíduo, este foi incorporado a uma mistura de óxidos metálicos para obtenção do pigmento inorgânico. A formação do pigmento foi acompanhada através de difração de raios X, onde foi observada a formação de fases espinélias contendo os metais Fe, Cr e Zn. O pigmento foi caracterizado por meio de microscopia eletrônica de varredura, distribuição de tamanho de partículas a laser, análise térmica diferencial e termogravimétrica. Os pigmentos calcinados por um ciclo de 8 h formaram fases espinélias cristalinas, provocando a inertização dos metais. Foi possível incorporar até 20% do resíduo de galvanoplastia na produção de pigmentos inorgânicos a base de Fe, Cr e Zn, sem que as características e qualidades fundamentais dos mesmos fossem alteradas.The solid waste in the effluent treatment from the galvanization process, its sludge, has received special attention due to the nature of its constituents. This waste presents in its composition, a high concentration of alkaline and transition metals. Inadequate discharge or storage of this waste could cause damage to the environment and to health. This work purposes an alternative for the inertization of galvanic wastes incorporating

  17. Fate of nickel ion in (II-III hydroxysulphate green rust synthesized by precipitation and coprecipitation Adsorção de íon níquel em (II-III green rust hidroxisulfato sintetizado por precipitação e co-precipitação

    Directory of Open Access Journals (Sweden)

    Lucia Helena Garófalo Chaves

    2007-08-01

    Full Text Available In order to investigate the efficiency of sulfate green rust (GR2 to remove Ni from solution, GR2 samples were synthesized under controlled laboratory conditions. Some GR2 samples were synthesized from Fe(II and Fe(III sulfate salts by precipitation. Other samples were prepared by coprecipitation, of Ni(II, Fe(II and Fe(III sulfate salts, i.e., in the presence of Ni. In another sample, Ni(II sulfate salt was added to pre-formed GR2. After an initial X-ray diffraction (XRD characterization all samples were exposed to ambient air in order to understand the role of Ni in the transformation of the GR2 samples. XRD was repeated after 45 days. The results showed that Nious GR2 prepared by coprecipitation is isomorphous to Ni-free GR2, i.e. Ni is incorporated into the crystalline structure. Fe(II was not replaced by Ni(II in the crystalline structure of GR2 formed prior to exposure to solution-phase Ni. This suggests Ni was adsorbed to the GR2 surface. Sulfate green rust is more efficient in removing Ni from the environment by coprecipitation.Com objetivo de investigar a eficiência do "sulfate green rust" (GR2 na remoção de Ni da solução, amostras de GR2 foram sintetizadas em laboratório sob condições controladas. Algumas amostras de GR2 foram sintetizadas pela precipitação de sais de Fe(II e de Fe(III; outras amostras, pela co-precipitação de sais de Ni(II, Fe(II e de Fe(III; e em outras amostras, o sulfato de Ni(II foi adicionado às amostras GR2 pré-formadas. Após caracterização inicial, por difração de raios X, todas as amostras ficaram expostas ao ar atmosférico durante 45 dias, a fim de se avaliar o papel do Ni na transformação delas. Após esse período, a difração de raios X das amostras foi repetida. Os resultados mostraram que Ni-GR2 preparado por co-precipitação é isomórfico do GR2, estando o íon Ni na estrutura cristalina deste. Fe(II não foi substituído por Ni(II na estrutura cristalina de GR2 formado a priori

  18. Thermal transformation of synthetic borax, Na2[B4O5(OH)4]x8H2O

    International Nuclear Information System (INIS)

    Abdullaev, G.K.

    1981-01-01

    Using the methods of high temperature roentgenography and derivatography thermal transformation of synthetic borax is studied. It is established that borax dehydration proceeds in four stages (50-80, 80-100, 100-150 and 150-500 deg C) with the formation of three intermediate crystalline hydrate forms (one stable and two unstable) and one final stable crystalline phase. The stable crystalline phases correspond to synthetic tincalconite Na 2 [B 4 O 5 (OH) 4 ]x3H 2 O and sodium tetraborate Na 2 B 4 O 7 . Thermal transformation of borax into tincalconite and sodium tetraborate is explained on the basis of their crystal structures [ru

  19. Presoja notranjih kontrol pri obračunu davka na dodano vrednost na primeru "Podjetja x"

    OpenAIRE

    Majcen, Borut

    2016-01-01

    Poslovanje podjetja si je ob odsotnosti notranjih kontrol nemogoče predstavljati. Podjetja so podvržena raznim tveganjem, še posebej v današnjih razmerah globalnega poslovanja, ko se podjetja soočajo z vedno novimi izzivi, kar prinaša tudi nova tveganja. Najučinkovitejši ukrep za obvladovanje tveganj predstavlja vzpostavitev sistema notranjih kontrol. Obvladovanje tveganj pa ne poteka samo na ravni podjetja kot celote, ampak je prisotno na vseh področjih delovanja podjetja, torej tudi na p...

  20. Soil water storage in an upland forest after selective logging in Central Amazonia Armazenamento de água no solo após extração seletiva de madeira em floresta de terra firme na Amazônia Central

    Directory of Open Access Journals (Sweden)

    S. J. F. Ferreira

    2004-02-01

    Full Text Available Soil water storage of Central Amazonian soil profiles in upland forest plots subjected to selective logging (in average, 8 trees or 34, 3 m³ of timber per hectare were removed was measured in four layers, down to a depth of 70 cm. The study lasted 27-months and was divided in two phases: measurements were carried out nearly every week during the first 15 months; in the following year, five intensive periods of measurements were performed. Five damage levels were compared: (a control (undisturbed forest plot; (b centre of the clearing/gap; (c edge of the gap; (d edge of the remaining forest; and (e remaining forest. The lowest values for water storage were found in the control (296 ± 19.1 mm, while the highest were observed (333 ± 25.8 mm in the centre of the gap, during the dry period. In the older gaps (7.5-8.5 year old, soil water storage was similar to the remaining and the control forest, indicating a recovery of hydric soil properties to nearly the levels prior to selective logging.Foi medido o armazenamento de água em perfis de solo de 0-70 cm, divididos em quatro camadas em parcelas de floresta de terra firme na Amazônia Central, submetidas à extração seletiva de madeira, tendo sido retiradas, em média, 8 árvores por hectare ou 34 m³ de madeira. O estudo foi realizado num período de 27 meses em duas fases: na primeira, as medidas foram, na sua maioria, semanais, num período de 15 meses. Na segunda, as medidas foram feitas em cinco períodos intensivos. Foram comparados cinco tratamentos: (a controle (floresta intacta, (b centro da clareira, (c borda da clareira, (d borda da floresta remanescente e (e floresta remanescente. Os valores mais baixos de armazenamento de água no solo (296 ± 19,1 mm foram encontrados no controle, enquanto os mais altos foram medidos no centro da clareira (333 ± 25,8 mm, no período seco. Nas clareiras mais antigas (7,5-8,5 anos de idade, os armazenamentos de água no solo foram similares aos da

  1. Regeneração de espécies nativas lenhosas sob plantio de Eucalyptus em área de Cerrado na Floresta Nacional de Paraopeba, MG, Brasil Regeneration of wood natives species under Eucalyptus stand of Cerrado area in the Floresta Nacional of Paraopeba, Minas Gerais, Brazil

    Directory of Open Access Journals (Sweden)

    Andreza Viana Neri

    2005-06-01

    Full Text Available A regeneração de sub-bosques em plantios homogêneos tem estreita dependência de florestas vizinhas. Outros fatores exercem influência, como a ecologia da dispersão da espécie, os efeitos de borda e clareiras. Diante disto, procurou-se conhecer a florística e a estrutura da vegetação lenhosa de espécies nativas sob plantio de Eucalyptus em área de Cerrado na Floresta Nacional de Paraopeba, MG, e verificar a variação da riqueza, da densidade e de indivíduos zoocóricos e anemocóricos da borda para o interior do talhão. Para tal, foram alocadas cinco parcelas de 5×40 m, subdivididas em parcelas 5×10 m. Foram encontradas 47 espécies e destas as que se destacaram foram Magonia pubescens A. St.-Hil.e Miconia albicans (Sw. Triana, principalmente quanto à alta densidade. Das espécies amostradas 53% possuem dispersão zoocórica e 43% anemocórica. Verificou-se também a diminuição da riqueza, da densidade e da percentagem de indivíduos anemocóricos da borda para interior. Porém a percentagem de indivíduos zoocóricos aumentou no interior do talhão. A maior riqueza e densidade na borda dá-se pela dificuldade da dispersão de diásporos no interior do fragmento. O índice de diversidade (H'= 2,49 encontrado para este estudo foi próximo aos valores observados em estudos em regeneração sob Eucalyptus em áreas de Cerrado.The regeneration of understory in homogeneous stands is closely dependent of neighbour forests. Others factures also have influency such as the species dispersion ecology, the border effects and clearings. Therefore, the objective of this work were to study the floristic and structure of native woody plant species growing under stands of Eucalyptus in the Cerrado area in the Flona (Floresta Nacional - National Forest of Paraopeba, Minas Gerais, Brazil, and to determine the variations in richness, density and the zoochorous and anemochorous individual dispersions from the borders into the stand. To carry out

  2. Systems of Na/sup +/NO/sub 3/, Na/sub 2/SO/sub 4/, RbNO/sub 3/, Rb/sub 2/SO/sub 4/-H/sub 2/O and NaNO/sub 3/, Na/sub 2/SO/sub 4/, CsNO/sub 3/, Cs/sub 2/SO/sub 4/-H/sub 2/O at 25 and 75 deg C

    Energy Technology Data Exchange (ETDEWEB)

    Poletaev, I F; Krasnenkova, L V

    1975-08-01

    Quaternary Na/sup +/, Rb/sup +///NO/sub 3/-, SO/sub 4//sup 2 -/-H/sub 2/O and Nsub(+), Cs/sup +///NO/sub 3/-, SO/sub 4//sup 2 -/-H/sub 2/O mutual systems have been studied isothermally. The following six fields of crystallization have been revealed in these systems at 25 deg C: Cs/sub 2/SO/sub 4/, Na/sub 2/SO/sub 4/, Na/sub 2/SO/sub 4/x10H/sub 2/O, NaNO/sub 3/xNa/sub 2/SO/sub 4/x2H/sub 2/O, NaNO/sub 3/, and CsNO/sub 3/.

  3. Melting Behavior and Thermolysis of NaBH4−Mg(BH4)2 and NaBH4−Ca(BH4)2 Composites

    OpenAIRE

    Ley, Morten; Roedern, Elsa; Thygesen, Peter; Jensen, Torben

    2015-01-01

    The physical properties and the hydrogen release of NaBH 4 –Mg(BH 4 ) 2 and NaBH 4 −Ca(BH 4 ) 2 composites are investigated using in situ synchrotron radiation powder X-ray diffraction, thermal analysis and temperature programmed photographic analysis. The composite, x NaBH 4 –(1 − x )Mg(BH 4 ) 2 , x = 0.4 to 0.5, shows melting/frothing between 205 and 220 °C. However, the sample does not become a transparent molten phase. This behavior is similar to other alkali-alkaline earth metal borohydr...

  4. Structural characteristics of Mg-doped (1-x)(K0.5Na0.5)NbO3-xLiSbO3 lead-free ceramics as revealed by Raman spectroscopy

    International Nuclear Information System (INIS)

    Zhu, W L; Meng, Y; Pezzotti, G; Zhu, J L; Wang, M S; Zhu, B; Zhu, X H; Zhu, J G; Xiao, D Q

    2011-01-01

    This paper presents a Raman spectroscopic study of compositional-change-induced structure variation and of the related mechanism of Mg doping in LiSbO 3 (LS)-modified (K 0.5 Na 0.5 )NbO 3 (KNN) ceramics. With increasing LS content from 0 to 0.06, a discontinuous shift towards higher wavenumbers was found for the band position of the A 1g (v 1 ) stretching mode of KNN, accompanied by a clearly nonlinear broadening of this band and a decrease in its intensity. Such morphological changes in the Raman spectrum result from two factors: (i) changes in polarizability/binding strength of the O-Nb-O vibration upon incorporation of Li ions in the KNN perovskitic structure and (ii) a polymorphic phase transition (PPT) from orthorhombic to tetragonal (O → T) phase at x > 0.04. Upon increasing the amount, w, of Mg dopant incorporated into the (1-x)KNN-xLS ceramic structure, the intensity of the Raman bands are enhanced, while the peak position and the full width at half maximum of the A 1g (v 1 ) mode was found to experience a clear dependence on both w and x. Raman characterization revealed that the mechanism of Mg doping is strongly correlated with the concentration of Li in the perovskite structure: Mg 2+ ions will preferentially replace Li + ions for low Mg doping while replace K/Na ions for higher doping of Mg. The PPT O → T was also found to be altered by the introduction of Mg and the critical value of LS concentration, x O-T , for incipient O → T transition in the KNN-xLS-wMT system was strongly dependent on Mg content, with x O→T being roughly equal to 0.04 + 2w, for the case of dilute Mg alloying. (paper)

  5. Avaliação da microcirculação das bordas do tendão do supra-espinal nas lesões do manguito rotador Microvascular evaluation of the supraspinatus tendon borders in rotator cuff lesions

    Directory of Open Access Journals (Sweden)

    Roberto Yukio Ikemoto

    2007-12-01

    Full Text Available OBJETIVOS: Avaliar a microcirculação das bordas do tendão supra-espinal nas lesões do manguito rotador com a finalidade de determinar a necessidade ou não do desbridamento de suas bordas no momento do seu reparo cirúrgico. MÉTODOS: No período de junho a dezembro de 2004, foram avaliadas amostras recolhidas de 31 pacientes portadores de lesão completa do tendão supra-espinal, submetidos ao tratamento da lesão do manguito rotador por via artroscópica. Apresentavam idade entre 42 e 82 anos (média de 56,6 anos, sendo nove do sexo masculino e 22 do feminino. Durante a realização do procedimento, foram retiradas amostras de tecido da lesão do manguito rotador e enviadas para estudo anatomopatológico com coloração com hematoxilina-eosina. Após esse processo, foi realizada a contagem das fendas vasculares/mm². Utilizaram-se como grupo controle 10 amostras de tendões normais do supra-espinal de cadáveres frescos, submetidos aos mesmos processos anteriores. Os resultados obtidos foram avaliados estatisticamente através da aplicação do teste de Mann-Whitney. RESULTADOS: Entre as amostras, 28 apresentaram tecidos vascularizados e três, ausência de vascularização. O número médio de fendas vasculares/mm² nas amostras de lesões do manguito rotador foi estatisticamente maior que o do grupo controle. CONCLUSÃO: A maioria das bordas das lesões dos tendões do supra-espinal é hipervascularizada.OBJECTIVES: To evaluate microvasculature in the borders of the supraspinatus tendon in rotator cuff lesions in order to determine the need to debrid the borders when surgical repair is performed. METHODS: From June to December 224, samples were evaluated from 31 patients with full lesion of the supraspinatus tendon that had been submitted to arthroscopic rotator cuff lesion treatment. They were between 42 and 82 years of age (mean 56.6 years, nine of them male, and twenty-two female. During the procedure, samples of the rotator cuff

  6. Structural and electrical properties of (1-x)(Na1/2Bi1/2)TiO3-xPb(Mg1/3Nb2/3)O3 solid solution

    International Nuclear Information System (INIS)

    Lee, J.-K.; Yi, J.Y.; Hong, K.S.

    2004-01-01

    Structural, dielectric and piezoelectric properties of (1-x)(Na 1/2 Bi 1/2 )TiO 3 -xPb(Mg 1/3 Nb 2/3 )O 3 (NBT-xPMN) solid solution have been investigated. An addition of PMN into NBT transformed the structure of sintered samples from rhombohedral to pseudocubic phase where x is larger than 0.1. In calcined powders, however, the intermediate structure were observed between rhombohedral and cubic phases near x=0.1. The formation of solid solution between NBT and PMN modified the dielectric and piezoelectric properties of NBT to be suitable for high temperature dielectric and piezoelectric material. With increasing the content of PMN, the temperature-stability of ε r (T) increased and the high temperature dielectric loss decreased. In addition, the piezoelectric property of NBT-xPMN was enhanced, for the decrease of coercive field and conductivity promoted the domain reversal under the high electric field of the poling process

  7. Síntese e propriedades fotoluminescentes do óxido de cério dopado com magnésio

    Directory of Open Access Journals (Sweden)

    G. P. Casali

    2014-09-01

    Full Text Available Neste trabalho são investigadas as propriedades ópticas de fotoluminescência do óxido de cério dopado com magnésio na forma de pós para analisar a influência dos sais precursores dos íons de interesse sobre a morfologia e as propriedades ópticas e para avaliar as propriedades ópticas com excitação em diferentes comprimentos de onda na região do visível e ultravioleta. Os pós foram obtidos pelo método dos precursores poliméricos. A caracterização estrutural dos materiais obtidos foi feita por difração de raios X. A estrutura e a simetria dos materiais foram estudadas por espectrometria de espalhamento Raman. As curvas de transmissão foram avaliadas por espectroscopia eletrônica na região UV-Vis. As propriedades ópticas foram avaliadas por espectroscopia de fotoluminescência e a microestrutura por microscopia eletrônica de varredura

  8. Comparison between tympanic and anal temperature with a clinical infrared ray thermometer in dogs Comparação entre a temperatura timpânica e a temperatura anal usando um termômetro clínico de raio infravermelho em cães

    Directory of Open Access Journals (Sweden)

    G.G.S. Wiedemann

    2006-08-01

    Full Text Available A clinical thermometer of infrared rays was used twice to record consecutively the temperature of the tympanic membrane in each ear and in the anus of 53 dogs. Temperatures did not differ significantly between organs, and were strongly correlated. The anal temperature measurement with an infrared thermometer in dogs is feasible and trustworthy, as well as the thermal checking of tympanic temperature.Utilizou-se um termômetro clínico de emissão de raios infravermelhos para medir, duas vezes consecutivas, a temperatura da membrana timpânica de cada ouvido e duas vezes a temperatura no ânus de 53 cães. Não houve diferença entre as temperaturas quanto ao órgão estudado e a correlação entre as temperaturas foi alta. Em cães, a medida da temperatura anal com o termômetro clínico de emissão de raios infravermelhos é rápida e confiável tanto quanto a da temperatura timpânica.

  9. Influence of the manganese and cobalt content on the electrochemical performance of P2-Na0.67MnxCo1-xO2 cathodes for sodium-ion batteries.

    Science.gov (United States)

    Hemalatha, K; Jayakumar, M; Prakash, A S

    2018-01-23

    The resurgence of sodium-ion batteries in recent years is due to their potential ability to form intercalation compounds possessing a high specific capacity and energy density comparable to existing lithium systems. To comprehend the role of cobalt substitution in the structure and electrochemical performance of Na 0.67 MnO 2 , the solid solutions of P2-Na 0.67 Mn x Co 1-x O 2 (x = 0.25, 0.5, 0.75) are synthesized and characterized. The XRD-Rietveld analysis revealed that the Co-substitution in Na 0.67 MnO 2 decreases lattice parameters 'a' and 'c' resulting in the contraction of MO 6 octahedra and the enlargement of inter-layer 'd' spacing. XPS indicates that the isovalent cobalt substitution in Na 0.67 MnO 2 results in the partial/complete replacement of Jahn-Teller active trivalent manganese to form low-spin complexes of better structural stability. The Na-ion diffusion coefficient, D Na + , derived from cyclic voltammetry and impedance spectroscopy, confirmed the enhanced mass transport in Co-rich phases compared to Mn-rich phases. Furthermore, higher diffusion coefficient values are observed for Co 3+ /Co 4+ than for their Mn 3+ /Mn 4+ redox processes. In addition, Co-rich phases exhibit a high structural stability and superior capacity retention, whereas Mn-rich phases discharge higher capacities.

  10. Doses de gesso em cafeeiro: influência nos teores de cálcio, magnésio, potássio e ph na solução de um latossolo vermelho distrófico

    Directory of Open Access Journals (Sweden)

    Bárbara Zini Ramos

    2013-08-01

    Full Text Available O desbalanço entre Ca2+, Mg2+ e K+ no solo como consequência das aplicações elevadas de gesso deve-se às relações de tamanho (raio iônico e densidades de cargas (relação carga/raio de cada espécie iônica. Quanto maior a densidade de carga, mais intensa será a ligação iônica do cátion com íons de cargas opostas como OH- e SO4-2. Dessa maneira, o uso excessivo de gesso agrícola, sem considerar o balanço de cargas das partículas do solo; o equilíbrio iônico; e a CTC podem resultar em expressiva lixiviação ao longo do perfil do solo. O objetivo deste estudo foi avaliar o efeito de elevadas doses de gesso (0, 7 e 56 t ha-1 nos teores de Ca2+, Mg2+, K+ e pH na solução de um Latossolo Vermelho distrófico cultivado com cafeeiro, obtida pelo método adaptado do extrato aquoso. O solo foi amostrado nas profundidades de 0,15-0,25; 0,35-0,45; 0,75-0,85; 1,15-1,25 e 2,35-2,45 m na linha de plantio, em quatro tratamentos: G-0 - gesso no preparo (aplicação ocorreu em setembro de 2008, distribuído a lanço, na quantidade de 2 t ha-1 e sem gesso na linha de plantio; G-7 - gesso adicionado durante a preparação do solo (2 t ha-1, na mesma condição do G-0 e 7,0 t ha-1 de gesso na linha de plantio; G-56 - gesso adicionado durante a preparação do solo (2 t ha-1, na mesma condição do G-0 e 56 t ha-1 de gesso na linha de plantio (nessas parcelas experimentais as entrelinhas de plantio foram cobertas com braquiária; e CV-7: ausência de braquiária na entrelinha, com gesso no preparo e 7 t ha-1 de gesso na linha, com três repetições distribuídas em blocos ao acaso, totalizando 60 amostras. Após 16 meses da adição de gesso, observou-se redução do pH na solução do solo nas profundidades de 0,15-0,25; 0,35-0,45 e 0,75-0,85 m. A aplicação de gesso agrícola foi eficiente na melhoria do ambiente radicular no subsolo, aumentou a concentração de Mg2+ e Ca2+ na solução do solo, mas reduziu o K+ em profundidade, a partir

  11. Estudio del Sistema Li2SO4 – Na2SO4. Diagrama de fases y caracterización del LiNaSO4

    Directory of Open Access Journals (Sweden)

    Font-Bardia, M.

    2004-08-01

    Full Text Available An exhaustive study of the phase diagram of binary system Li2SO4-Na2SO4 is presented. Phase diagram was determined using thermo-X-ray diffraction in powder samples and calorimetry ATD. A new phase with formula Li2-xNaxSO4 has been obtained, with 1 ≤ x ≤ 1.22. The crystal structure of β-LiNaSO4 was determined from single-crystal X-ray diffraction. This study shows that the crystals usually become twinned when the growth is by solution; which explains the poor spontaneous polarization. The Raman dispersion of Li2SO4, Na2SO4 and LiNaSO4 compounds is explained from the structural data. The measurements have been made at different heating and cooling rate.Se presenta un estudio exhaustivo del diagrama de fase del sistema binario Li2SO4-Na2SO4. El diagrama de fases se determinó mediante termo-difractometría de rayos-X en muestras de polvo y calorimetría ATD. Se obtiene una nueva fase de fórmula Li2-xNaxSO4, con 1 ≤ x ≤ 1.22. La estructura cristalina de β-LiNaSO4 se determinó por difracción de rayos-X sobre un monocristal. Este estudio muestra que los cristales usualmente se maclan cuando el crecimiento es por solución, lo cual explica la baja polarización espontánea. Se explica la dispersión Raman de los compuestos Li2SO4, Na2SO4 y LiNaSO4, a partir de los datos estructurales. Las medidas experimentales se han efectuado a diferentes velocidades de calentamiento y enfriamiento.

  12. EL MAESTRO ORLANDO FALS BORDA SUS IDEAS EDUCATIVAS Y SOCIALES PARA EL CAMBIO EN LA SOCIEDAD COLOMBIANA

    Directory of Open Access Journals (Sweden)

    Javier Ocampo López

    2009-01-01

    Full Text Available Este trabajo de investigación de HISULA en la serie de Educadores Latinoamericanos tiene por objeto el estudio de las ideas educativas y la metodología científica de la Investigación-Acción Participativa del educador Dr. Orlando Fals Borda, uno de los grandes ideólogos de la educación universitaria en Colombia. Se preocupa por el análisis de sus principales obras relacionadas con el estudio sociológico de los campesinos de los Andes y el Hombre y la Tierra en la región cundiboyacense del Altiplano Andino. Este ilustre educador barranquillero hizo sus trabajos de investigación sociológica del pueblo colombiano y defendió el papel de la educación en el cambio social. Con su metodología de la investigación-acción participativa señaló los nuevos rumbos de la educación colombiana centrada en el alumno y en la filosofía del "aprender haciendo". En sus actividades docentes formó una generación de sociólogos dedicados a la investigación social en una época de crisis y de cambios. Por ello su acción se realizó en la Facultad de Sociología de la Universidad Nacional y en sus investigaciones científicas y educativas, destacando su metodología de "La investigación-Acción Participativa". Su actuación fue definitiva como ideólogo de la Constitución Nacional de 1991, en la cual se plasmaron algunas de sus ideas.

  13. Caracterizações de argilas bentoníticas e síntese de argilas organofílicas para uso em nanocompósitos poliméricos: parte II Characterization of bentonite clay and synthesis of organoclay for polymer nanocomposites applications: part II

    Directory of Open Access Journals (Sweden)

    R. Barbosa

    2012-12-01

    Full Text Available Nanocompósitos poliméricos tem atraído um considerável interesse, o que se deve a estes materiais oferecerem combinações incomuns de propriedades. As argilas esmectíticas são comumente utilizadas como fase dispersa na obtenção dos nanocompósitos, em particular destaque para as argilas bentoníticas. Neste trabalho, foram estudadas três argilas bentoníticas sem modificação e após a modificação ou organofilização com o sal cloreto de estearil dimetil amônio. A capacidade de troca catiônica (CTC das argilas bentoníticas sem modificação foi realizada. A eficiência da organofilização foi avaliada por fluorescência de raios X e o grau de expansão das argilas organofílicas foram estudados por difração de raios X. A argila 1346 apresentou maior CTC em relação às demais argilas. Além disso, os resultados indicaram a organofilização das argilas com o sal quaternário de amônio, o que foi observado pela presença do sal no espaçamento basal das argilas e pela expansão basal na reflexão d001 das argilas.Polymeric nanocomposites have attracted considerable interest because this material offers unusual combination of properties. The smectite clays are commonly used as the dispersed phase to obtain nanocomposites, in particular, bentonite clays. In this work three bentonite clays without modification and after modification with salt or organophilization stearyl dimethyl ammonium chloride were studied. The cation exchange capacity (CEC of bentonite clay was carried out without modification. The efficiency of organophilization was evaluated by X-ray fluorescence and the degree of expansion of the organoclay by X-ray diffraction. The 1346 clay shows higher CEC than that of other clays. In addition, the results indicate that organophilization clays with quaternary ammonium salt, which was observed by the presence of salt in the basal spacing of clay and the expansion of the basal reflection d001 clays.

  14. Comportamento do vírus da poliomilelite após irradiação ionizante Behaviour of poliomyelitis virus after ionizing radiation

    Directory of Open Access Journals (Sweden)

    J. Guilherme Lacorte

    1971-01-01

    Full Text Available Prosseguindo nas suas experiências referentes à ação dos Raios X e do Radium sôbre vírus, iniciadas em 1953, quando verificaram que o vírus da gripe submetido a doses não elevadas de Raios X mostra-se com poder patogênica aumentando para camundongos, os autores, nas pesquisas referidas no presente trabalho, submeteram o vírus da poliomielite, amostra MEF1 do tipo 2, à ação de Raios X em doses que que foram de 307r até 3.408.500 r. Empregaram-se 2.140 animais, nas experiências aqui relatadas, o que permitiu conclusões seguras. Os autores observaram irregularidade no comportamento do vírus da poliomielite submetido à ação dos Raios X, no sentido de aumentar-lhe o poder patogênico, em relação com o vírus testemunha, não irradiado. Assinalaram a observação que fizeram sôbre a resistência do vírus seguramente a 3.101.000 r o que julgaram de interêsse registrar. A resistência quase desaparece a 3.386.000 r. Após aplicação de 3.408.500 r o vírus tornou-se inativo.The authors refered in the present paper the experiments made with poliomyelitis virus, type 2, strain MEF1, after exposition to X Rays in the Carrel flask in a fluid layer of 0,1 ml of the vírus suspension. The titrations of the irradiated virus were made after the exposition of the virus suspension from 307 r to 3.408.500 r. The authors observed irregularity in the behaviour of the irradiated virus in comparison with the control. The virus was less active after exposition from 1.021.000 r to 3.386.000 r than the control but still pathogenic for mice. After exposition to 3.408.500 r the virus was inactivated.

  15. Irradiation effects on meat: a review Efeito da irradiação na carne: uma revisão

    Directory of Open Access Journals (Sweden)

    Fábio Costa Henry

    2009-12-01

    Full Text Available Food irradiation is a process exposing food to ionizing radiations such as gamma rays emitted from the radioisotopes 60Co and 137Cs, or, high energy electrons and X-rays produced by machine sources. Irradiation can induce formation of isooctane-soluble carbonyl compounds in the lipid fraction and acid-soluble carbonyls in the protein fraction of meat. Increasing irradiation dose increases these compounds however, cooking reduces them. Among the volatile components, 1-heptene and 1-nonene are influenced most by irradiation dose, and aldehydes (propanal, pentanal, hexanal are influenced most by packaging type (aerobiose vs vacuum. Sulfur-containing volatiles formed from sulfur-containing compounds (primarily amino acids also contribute to irradiation odor. Reducing the temperature during the irradiation process reduces the effects on odor/flavor because free radical generation and dispersion are reduced. Ultimately, radiolysis of water into free radical species may be the initiators of both lipid oxidation breakdown products and sulfur-containing volatiles responsible for irradiation odor. Methods to decrease the detrimental effects of irradiation include oxygen exclusion (vacuum packaging, replacement with inert gases (nitrogen and addition of protective agents (antioxidants.A irradiação de alimentos é um processo que expõe o alimento às radiações ionizantes tais como os raios gama, emitidos pelos isótopos radioativos 60Co e 137Cs, ou, os elétrons de alta energia e os raios X. A irradiação pode induzir a formação de compostos de carbonil isooctano solúveis na fração do lipídio e carbonils solúveis nos ácidos da fração proteica da carne. A dose crescente da irradiação aumenta estes compostos, entretanto o cozimento pode reduzi-los. Entre os componentes voláteis, 1 heptene e 1 nonene são mais influenciados pela dose de radiação, e os aldeídos (propanal, pentanal, hexanal são mais influenciados pelo tipo de embalagem

  16. A DINÂMICA ESPAÇO-TEMPORAL DO PROCESSO DE VOÇOROCAMENTO NO PERÍMETRO URBANO DE RANCHARIA-SP

    Directory of Open Access Journals (Sweden)

    Alyson Bueno Francisco

    2010-09-01

    Full Text Available Este texto apresenta as considerações de um estudo sobre a dinâmica do voçorocamento localizado na periferia da cidade de Rancharia-SP, através de resultados analisados na escala espacial e temporal, tendo como base a aplicação do método de estaqueamento proposto por De Ploey e Gabriels (1980, Morgan (1986 e Guerra (1996. Considerando as taxas de erosão das bordas, o estudo constatou a influência das características texturais dos solos e do regime pluviométrico na dinâmica do voçorocamento.

  17. Anatomia do lenho de cinco espécies comercializadas como 'Sucupira'

    Directory of Open Access Journals (Sweden)

    Warley Felício Soares

    Full Text Available A análise comparativa da anatomia do lenho das espécies Bowdichia nitida Spruce ex Benth, Diplotropis brasiliensis (Tul. Benth., Diplotropis martiusii Benth., Diplotropis purpurea (Rich. Amshoff e Diplotropis racemosa (Hoehne Amshoff é descrita no presente trabalho, visando a determinar as principais características anatômicas necessárias à distinção dessas espécies. Qualitativamente, as características anatômicas mais importantes para a diferenciação do lenho dessas espécies foram: camadas de crescimento, estratificação dos raios, arranjo dos vasos e fileira marginal dos raios. Quantitativamente, a análise estatística mostrou que os parâmetros anatômicos mais importantes no agrupamento das espécies foram: diâmetro dos elementos de vasos, largura dos raios em micrometros, comprimento, espessura da parede e largura das fibras. Verificou-se que a anatomia do lenho pode ser utilizada como importante subsídio na identificação das espécies estudadas.

  18. Interplay between mesoscopic phase separation and bulk magnetism in the layered Na.sub.x./sub.CoO.sub.2./sub

    Czech Academy of Sciences Publication Activity Database

    Zorkovská, A.; Orendáč, M.; Šebek, Josef; Šantavá, Eva; Svoboda, P.; Bradaric, I.; Savič, I.; Feher, A.

    2005-01-01

    Roč. 72, č. 13 (2005), 132412/1-132412/4 ISSN 1098-0121 Institutional research plan: CEZ:AV0Z10100520 Keywords : Na x CoO 2 * mesoscopic phase separation * bulk magnetism Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 3.185, year: 2005

  19. Influência dos parâmetros de configuração do modelo CALMET sobre a simulação da circulação atmosférica na região metropolitana do Rio de Janeiro

    Directory of Open Access Journals (Sweden)

    Luiz Claudio Gomes Pimentel

    2014-12-01

    Full Text Available O objetivo desse estudo é a analise dos efeitos dos parâmetros de configuração do modelo CALMET sobre a simulação da circulação atmosférica em superfície nas Bacias Aéreas I e III da Região Metropolitana do Rio de Janeiro (RMRJ. O estudo foi realizado para um período em que a RMRJ estava sob a atuação de um sistema de alta pressão, que não influenciou significativamente as circulações locais na região. A análise conjunta dos resultados indica que a melhor configuração para simulações do campo de vento na RMRJ com o sistema combinado de modelagem MM5/CALMET é obtida utilizando o valor de 10 km para o parâmetro TERRAD e Raio de Influência entre 7 e 10 km.

  20. Monitoring of garbage with a 5 x 5 NaI (Tl) detector; Monitoreo de basura con un detector de NaI (Tl) de 5 x 5

    Energy Technology Data Exchange (ETDEWEB)

    Cortes P, A.; Becerril V, A.; Angeles C, A

    1991-12-15

    So far in that is carried out the first reload of nuclear fuel in the LVC, the monitoring of garbage has been carried out using monitors trade mark Eberline model RM 14. The procedure consists in manually monitoring each object and to separate of the considered 'clean' garbage the objects considered as contaminated, which register greater or equal counts to 100 cpm. This way to process was adequate under normal operation conditions, but not in the operation rhythm that implies a bigger maintenance since the time required for monitoring from 5 to 10 kg. of garbage is of the order of 0.5 hours and the production rhythm of this it ends up being a lot but high. Due to this necessity it was thought about the problem of looking by a more efficient monitoring method. In this work a method that uses a detector of NaI (Tl) of 5 x 5 inches is discussed. (Author)

  1. Monitoring of garbage with a 5 x 5 NaI (Tl) detector; Monitoreo de basura con un detector de NaI (Tl) de 5 x 5

    Energy Technology Data Exchange (ETDEWEB)

    Cortes P, A; Becerril V, A; Angeles C, A

    1991-12-15

    So far in that is carried out the first reload of nuclear fuel in the LVC, the monitoring of garbage has been carried out using monitors trade mark Eberline model RM 14. The procedure consists in manually monitoring each object and to separate of the considered 'clean' garbage the objects considered as contaminated, which register greater or equal counts to 100 cpm. This way to process was adequate under normal operation conditions, but not in the operation rhythm that implies a bigger maintenance since the time required for monitoring from 5 to 10 kg. of garbage is of the order of 0.5 hours and the production rhythm of this it ends up being a lot but high. Due to this necessity it was thought about the problem of looking by a more efficient monitoring method. In this work a method that uses a detector of NaI (Tl) of 5 x 5 inches is discussed. (Author)

  2. Complex phosphates in the Li(Na)3PO4-InPO4 systems

    International Nuclear Information System (INIS)

    Potapova, A.M.; Zimina, G.V.; Smirnova, I.N.; Novoselov, A.V.; Spiridonov, F.M.; Stefanovich, S.Yu.

    2008-01-01

    Subsolidus sections in the systems Li 3 PO 4 -InPO 4 (950 deg C) and Na 3 PO 4 -InPO 4 (800, 900, and 1000 deg C) have been studied by X-ray powder diffraction. The compound Li 3 In(PO 4 ) 2 has been synthesized, and the NASICON-type solid solution Li 3(1-x) In 2+x (PO 4 ) 3 (0.67 ≤ x ≤ 0.80) has been found to exist. In the system Na 3 PO 4 -InPO 4 , the solid solution Na 3(1-x) In x/3 PO 4 (0 ≤ x ≤ 0.2) and two complex phosphates exist: Na 3 In(PO 4 ) 2 and Na 3 In 2 (PO 4 ) 3 . These complex phosphates are dimorphic, with the irreversible-transition temperature equal to 675 and 820 deg C, respectively. Na 3 In(PO 4 ) 2 degrades at 920 deg C. Ionic conductivity has been measured in some phases in the system [ru

  3. The study of geometric structure of Na films on Cu(110)

    International Nuclear Information System (INIS)

    Zeybek, O.

    2004-01-01

    In order to understand the geometric structure of Na films on Cu( 110) substrate, a couple of surface science techniques have been applied in this study. The thickness of the Na films were calculated using X-ray Photoelectron Spectroscopy data and Mean Free Path. The coverages were compared with the work function changes in this study and other investigations. Sub-monolayer and up to 2 ML thickness of Na films on Cu(110) have been investigated using Low Energy Electron Diffraction (LEED) and Ultra Violet Inverse Photoelectron Spectroscopy. It is found that the (1 x 1) LEED pattern of Cu(110) changes to (1 x 2) with increasing Na coverage up to 1 ML. Af ter 1 ML Na films, LEED shows again (1 x 1) structure

  4. Alterações na mineralogia de um argissolo do Rio Grande do Sul submetido à fertilização potássica Potassium fertilization affecting the mineralogy of a rhodic acrisol in Rio Grande do Sul - Brazil

    Directory of Open Access Journals (Sweden)

    Edson Campanhola Bortoluzzi

    2005-06-01

    Full Text Available As mudanças mineralógicas de solos cultivados e submetidos à fertilização potássica ainda são pouco conhecidas em regiões de clima subtropical úmido. Para que estas sejam avaliadas, amostras de solo foram coletadas, na profundidade de 0-10 cm, em um experimento realizado desde 1991 no campo experimental do Departamento de Solos da Universidade Federal de Santa Maria, com e sem fertilização potássica. Adicionalmente, foi coletada uma amostra de solo sob campo nativo em área ao lado do experimento. As amostras foram submetidas às análises de K total, K não-trocável, K trocável com extração simples, extrações sucessivas e à difratometria de raios X. Os difratogramas de raios X foram obtidos sobre amostras de solo e argila saturadas com Ca2+, com posterior modelagem matemática, e indicaram a presença de feldspato, ilita, interestratificados do tipo ilita-esmectita, dentre outros. Após o segundo ano do início do experimento, os teores de K trocável estabilizaram-se em 30 e 90 mg kg-1 para o solo que recebeu 0 e 90 kg ha-1 ano-1 de K2O, respectivamente. A adição de 90 kg ha-1 ano-1 de K2O manteve maior proporção dos argilominerais do tipo ilita e do tipo ilita-esmectita interestratificado na fração menor que 2 µm que sem a adição de K2O. Com o cultivo, independentemente da dose de fertilização potássica recebida, as fases ilita e ilita-esmectita tenderam a diminuir sua proporção relativa em detrimento da fase vermiculita hidróxi-Al entrecamadas.Changes in soil mineralogical properties in humid subtropical regions due to potassic fertilizer practices are so far poorly understood. The main objective of this study was to compare the changes in soil minerals and the consequences on K+ release. Soil samples (depth of 0-10 cm were collected over eleven years from areas with and without K fertilization and from a nearby natural grassy vegetation site on the Campus of the Federal University of Santa Maria. The K

  5. Ammonothermal synthesis of alkali-alkaline earth metal and alkali-rare earth metal carbodiimides. K{sub 5-x}M{sub x}(CN{sub 2}){sub 2+x}(HCN{sub 2}){sub 1-x} (M = Sr, Eu) and Na{sub 4.32}Sr{sub 0.68}(CN{sub 2}){sub 2.68}(HCN{sub 2}){sub 0.32}

    Energy Technology Data Exchange (ETDEWEB)

    Mallmann, Mathias; Haeusler, Jonas; Cordes, Niklas; Schnick, Wolfgang [Department of Chemistry, University of Munich (LMU) (Germany)

    2017-12-13

    Alkali-alkaline earth metal and alkali-rare earth metal carbodiimides, namely K{sub 5-x}M{sub x}(CN{sub 2}){sub 2+x}(HCN{sub 2}){sub 1-x} (x = 0 - 1) (M = Sr, Eu) and Na{sub 4.32}Sr{sub 0.68}(CN{sub 2}){sub 2.68}(HCN{sub 2}){sub 0.32}, were synthesized under ammonothermal conditions in high-pressure autoclaves. The structures of the three compounds can be derived from homeotypic K{sub 5}H(CN{sub 2}){sub 3} and Na{sub 5}H(CN{sub 2}){sub 3} by partial substitution of K{sup +} or Na{sup +}by Sr{sup 2+} or Eu{sup 2+}. The reactions were carried out in two step syntheses (T{sub 1} = 673 K, T{sub 2} = 823 K) starting from sodium or potassium azide, dicyandiamide and strontium or Eu(NH{sub 2}){sub 2}, respectively. The crystal structures were solved and refined from single-crystal X-ray diffraction data [K{sub 4.16}Sr{sub 0.84}(CN{sub 2}){sub 2.84}(HCN{sub 2}){sub 0.16}: space group Im3m (no. 229), a = 7.8304(5) Aa, Z = 2, R{sub 1} = 0.024, wR{sub 2} = 0.052; K{sub 4.40}Eu{sub 0.60}(CN{sub 2}){sub 2.60}(HCN{sub 2}){sub 0.40}: space group Im anti 3m (no. 229), a = 7.8502(6) Aa, Z = 2, R{sub 1} = 0.022, wR{sub 2} = 0.049]. In contrast to the potassium carbodiimides, the sodium-strontium carbodiimide was only synthesized as microcrystalline powder. The crystal structure was determined by powder X-ray diffraction and refined by the Rietveld method [Na{sub 4.32}Sr{sub 0.68}(CN{sub 2}){sub 2.68}(HCN{sub 2}){sub 0.32}: space group Im3m (no. 229), a = 7.2412(1) Aa, Z = 2, R{sub wp} = 0.050]. The presence of hydrogencyanamide units ([HNCN]{sup -}) next to carbodiimide units ([CN{sub 2}]{sup 2-}) in all compounds was confirmed by FT-IR spectroscopy. (copyright 2017 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  6. The MIRAX x-ray astronomy transient mission

    Science.gov (United States)

    Braga, João; Mejía, Jorge

    2006-06-01

    The Monitor e Imageador de Raios-X (MIRAX) is a small (~250 kg) X-ray astronomy satellite mission designed to monitor the central Galactic plane for transient phenomena. With a field-of-view of ~1000 square degrees and an angular resolution of ~6 arcmin, MIRAX will provide an unprecedented discovery-space coverage to study X-ray variability in detail, from fast X-ray novae to long-term (~several months) variable phenomena. Chiefly among MIRAX science objectives is its capability of providing simultaneous complete temporal coverage of the evolution of a large number of accreting black holes, including a detailed characterization of the spectral state transitions in these systems. MIRAX's instruments will include a soft X-ray (2-18 keV) and two hard X-ray (10-200 keV) coded-aperture imagers, with sensitivities of ~5 and ~2.6 mCrab/day, respectively. The hard X-ray imagers will be built at the Instituto Nacional de Pesquisas Espaciais (INPE), Brazil, in close collaboration with the Center for Astrophysics & Space Sciences (CASS) of the University of California, San Diego (UCSD) and the Institut fur Astronomie und Astrophysik of the University of Tubingen (IAAT) in Germany; UCSD will provide the crossed-strip position-sensitive (0.5- mm spatial resolution) CdZnTe (CZT) hard X-ray detectors. The soft X-ray camera, provided by the Space Research Organization Netherlands (SRON), will be the spare flight unit of the Wide Field Cameras that flew on the Italian-Dutch satellite BeppoSAX. MIRAX is an approved mission of the Brazilian Space Agency (Agnecia Espacial Brasileira - AEB) and is scheduled to be launched in 2011 in a low-altitude (~550 km) circular equatorial orbit. In this paper we present recent developments in the mission planning and design, as well as Monte Carlo simulations performed on the GEANT-based package MGGPOD environment (Weidenspointner et al. 2004) and new algorithms for image digital processing. Simulated images of the central Galactic plane as it

  7. Low-energy X-ray and gamma spectrometry using silicon photodiodes; Espectrometria de raios X e gama de baixa energia utilizando fotodiodos de silicio

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Iran Jose Oliveira da

    2000-08-01

    The use of semiconductor detectors for radiation detection has increased in recent years due to advantages they present in comparison to other types of detectors. As the working principle of commercially available photodiodes is similar to the semiconductor detector, this study was carried out to evaluate the use of Si photodiodes for low energy x-ray and gamma spectrometry. The photodiodes investigated were SFH-205, SFH-206, BPW-34 and XRA-50 which have the following characteristics: active area of 0,07 cm{sup 2} and 0,25 cm{sup 2}, thickness of the depletion ranging from 100 to 200 {mu}m and junction capacitance of 72 pF. The photodiode was polarized with a reverse bias and connected to a charge sensitive pre-amplifier, followed by a amplifier and multichannel pulse analyzer. Standard radiation source used in this experiment were {sup 241} Am, {sup 109} Cd, {sup 57} Co and {sup 133} Ba. The X-ray fluorescence of lead and silver were also measured through K- and L-lines. All the measurements were made with the photodiodes at room temperature.The results show that the responses of the photodiodes very linear by the x-ray energy and that the energy resolution in FWHM varied between 1.9 keV and 4.4 keV for peaks corresponding to 11.9 keV to 59 keV. The BPW-34 showed the best energy resolution and the lower dark current. The full-energy peak efficiency was also determined and it was observed that the peak efficiency decreases rapidly above 50 keV. The resolution and efficiency are similar to the values obtained with other semiconductor detectors, evidencing that the photodiodes used in that study can be used as a good performance detector for low energy X-ray and gamma spectrometry. (author)

  8. High Capacity of Hard Carbon Anode in Na-Ion Batteries Unlocked by PO x Doping

    Energy Technology Data Exchange (ETDEWEB)

    Li, Zhifei; Ma, Lu; Surta, Todd Wesley; Bommier, Clement; Jian, Zelang; Xing, Zhenyu; Stickle, William F.; Dolgos, Michelle; Amine, Khalil; Lu, Jun; Wu, Tianpin; Ji, Xiulei

    2016-08-12

    The capacity of hard carbon anodes in Na-ion batteries 2.5 rarely reaches values beyond 300 mAh/g. We report that doping POx into local structures of hard carbon increases its reversible capacity from 283 to 359 mAh/g. We confirm that the doped POx is redox inactive by X-ray adsorption near edge structure measurements, thus not contributing to the higher capacity. We observe two significant changes of hard carbon's local structures caused by doping. First, the (002) d-spacing inside the turbostratic nanodomains is increased, revealed by both laboratory and synchrotron X-ray diffraction. Second, doping turns turbostratic nanodomains more defective along ab planes, indicated by neutron total scattering and the associated pair distribution function studies. The local structural changes of hard carbon are correlated to the higher capacity, where both the plateau and slope regions in the potential profiles are enhanced. Our study demonstrates that Na-ion storage in hard carbon heavily depends on carbon local structures, where such structures, despite being disordered, can be tuned toward unusually high capacities.

  9. Strain mediated magnetoelectric coupling induced in (x) Bi{sub 0.5}Na{sub 0.5}TiO{sub 3}-(1−x) MgFe{sub 2}O{sub 4} composites

    Energy Technology Data Exchange (ETDEWEB)

    Manjusha [Smart Materials Research Laboratory, Department of Physics, Indian Institute of Technology Roorkee, Roorkee 247667 (India); Yadav, K.L., E-mail: klyadav35@yahoo.com [Smart Materials Research Laboratory, Department of Physics, Indian Institute of Technology Roorkee, Roorkee 247667 (India); Adhlakha, Nidhi [Elettra-Sincrotrone Trieste S.C.p.A, Area Science Park, I-34012 Trieste (Italy); Shah, Jyoti; Kotnala, R.K. [CSIR-National Physical Laboratory, New Delhi 110012 (India)

    2017-06-01

    Particulate composites of ferroelectric and ferrite phases having general formula (x)Bi{sub 0.5}Na{sub 0.5}TiO{sub 3}-(1−x)MgFe{sub 2}O{sub 4} (x=0, 0.5, 0.6, 0.7, 0.8 and 1.0), equivalently denoted as (x)BNT-(1−x)MgFO were synthesized by solid state reaction method. From X-ray diffraction analysis, the structural transformation from tetragonal to rhombohedral corresponding to BNT phase was observed in composites with x=0.5 to x=0.8. Shifting of (012) BNT peak towards left (x=0.5, 0.8) and right side (x=0.6, 0.7) observed due to occupation of Bi{sup 3+} ions at interstitial and substitutional sites into host MgFO lattice respectively. BNT produced strain in MgFO lattice. Scanning electron micrographs show closely packed microstructure with grain size variations from 0.62 to 2.90 µm. The value of magnetoelectric (ME) coupling coefficient increases from 2.42 (x=0.5) to 4.79 (x=0.8) mV/cm. Oe due to strain produced in MgFO and BNT lattices.

  10. Feições Oceanográficas em Imagens MODIS na Condição de Sunglint: Exemplos para a Costa Sudeste Brasileira

    Directory of Open Access Journals (Sweden)

    Lucas Barbedo de Freitas

    Full Text Available Resumo Imagens ópticas e no infravermelho-próximo adquiridas por sensores remotos em condição de reflexão especular bidirecional entre o sol, a superfície do mar e o sensor (condição de sunglint podem ser utilizadas para identificar filmes, feições, processos oceanográficos e meteorológicos atuantes sobre a superfície marinha. Imagens do sensor orbital Moderate Resolution Imaging Spectroradiometer (MODIS em condição de sunglint na plataforma continental sudeste brasileira foram processadas e analisadas, permitindo identificar feições como a borda Oeste da Corrente do Brasil, meandramentos e vórtices de mesoescala, ondas internas solitárias, rolos atmosféricos e filmes superficiais de origem biogênica e mineral. Uma correção atmosférica mais apropriada para detecção de feições no sunglint é aprensentada, assim como, detalhes sobre a geometria de aquisição. A dependência geométrica do sunglint torna sua ocorrência mais favorável entre outubro e fevereiro na região de estudo quando ocorrem zênites solares mais propícios. Os mecanismos e processos que permitem identificar estas feições no sunglint foram descritos e ilustrados. A partir deste entendimento, as complexas feições identificadas podem ser interpretadas e aplicadas na oceanografia operacional e detecção de vazamentos de óleo na superfície do mar, bem como, para melhorar nosso entendimento sobre os processos físicos e biológicos do meio marinho.

  11. IMPORTÂNCIA DE REMANESCENTES FLORESTAIS PARA CONSERVAÇÃO DA BIODIVERSIDADE: ESTUDO DE CASO NA MATA ATLÂNTICA EM SERGIPE ATRAVÉS DE SENSORIAMENTO REMOTO

    Directory of Open Access Journals (Sweden)

    André Luiz Conceição Santos, Celso Morato de Carvalho, Thiago Morato de Carvalho

    2014-07-01

    Full Text Available São discutidos aspectos relevantes sobre fragmentos florestados para a conservação da biodiversidade e especificamente são analisados 403 remanescentes florestais (31.000 ha na mata atlântica de Sergipe através de sensoriamento remoto com base em imagens Spot 5 e fotografias aéreas. Os remanescentes foram categorizados em cinco grupamentos: i Santa Luzia do Itanhy-Estância, ii Aracaju-São Cristóvão-Itabaiana, iii Rosário do Catete, iv Japaratuba, v Pacatuba-Japoatã. A maioria dos fragmentos variou entre 17 – 70 ha; os grupamentos entre Aracaju e Santa Luzia do Itanhy estão entre os maiores. A conectividade entre os fragmentos variou entre 2-19 km; as distâncias médias entre fragmentos variaram em torno de 1 km. Os índices de circularidade variaram entre 0,006-0,31, mostrando prevalência de fragmentos com bordas irregulares.

  12. CARACTERIZAÇÃO E ESTUDO DA LIXIVIAÇÃO DE METAIS DE ESCÓRIAS PROVENIENTES DA RECICLAGEM DE BATERIAS DE CHUMBO-ÁCIDO

    Directory of Open Access Journals (Sweden)

    Michelli Barbosa de Andrade

    2014-10-01

    Full Text Available No Brasil, o chumbo metálico é obtido principalmente a partir da reciclagem de baterias de chumbo-ácido utilizando o processo pirometalúrgico, que é acompanhado da geração de uma escória que apresenta elementos como Fe, Si, S, Al, Ca, Zn, Pb. O objetivo deste trabalho foi de estudar a escória gerada no processo através da fluorescência e difração de raios X e de extrações utilizando o método de Tessier seguida da determinação das concentrações dos metais nos extratos por espectrometria de absorção atômica. Com os resultados da fluorescência de raios X, observou-se que a somatória das porcentagens dos elementos citados se aproxima a 97 %. Pela difração de raios X, detectou-se fases como: Pirrotita (Fe1-xS, Maghemita (Fe2O3, Fayalita (Fe2+2SiO4, Óxido de chumbo e alumínio (Pb2Al2O5, Hercinita (Fe2+Al2O4 e Óxido de chumbo (Pb2O3 e que nos extratos, estão presentes vários metais em concentrações variáveis, sendo que chumbo e ferro são encontrados geralmente em maior concentração.

  13. Influence of Na doping on the magnetic relaxation processes of magnetite

    International Nuclear Information System (INIS)

    Torres, C.; Arias, A. Gonzalez; Hisatake, K.; Francisco, C. de; Hernandez-Gomez, P.; Kim, C.O.; Kim, D.J.

    2007-01-01

    The relaxation of the initial magnetic permeability was measured in polycrystalline Na-doped magnetite samples, with nominal composition Na x Fe 3- x O 4 (x ranging from 0 to 0.05), by means of the magnetic disaccommodation (DA) technique. We found that the increasing amount of Na ions modifies the DA spectra and a very different behaviour depending on the sintering atmosphere. These results were discussed in terms of the presence of Na ions in the magnetite lattice, giving rise to certain modifications in their neighbourhood

  14. Mixed phosphates of the Na3PO4 - LnPO4 systems

    International Nuclear Information System (INIS)

    Slivko, T.A.; Smirnova, I.N.; Zimina, G.V.; Spiridonov, F.M.; Chudinova, N.N.

    2002-01-01

    The phase relationships in the systems Na 3 PO 4 - LnPO 4 (subsolidus 950 Deg C cross-sections), where Ln=Sm, Eu, Tb, Dy, Ho, Tm, Yb, Lu, were studied by X-ray analysis. Reactions of the components were deduced, formed phases were separated and identified. The Na 6 Ln 3 (PO 4 ) 5 (Ln=Dy, Ho, Tm), Na 3 Ln 2 (PO 4 ) 3 (Ln=Tm, Yb, Lu) compounds and phases of the unstable composition Na 6+x Ln 3-x/3 (PO 4 ) 5 (Ln=Yb, Lu, 0 ≤ x ≤ 1.5) were detected for the first time. In all systems the existence of the Na 3-x Ln x/3 PO 4 unstable composition phase on the basis of the high temperature modification of sodium phosphate (sp. gr. Fm3m) is established, suggesting that stabilization of this modification by rare earth ions is possible [ru

  15. Projeto Porto Nacional (Tocantins: uma proposta de atuação em saúde mental na comunidade

    Directory of Open Access Journals (Sweden)

    Adriane Bacellar Duarte Lima

    2003-01-01

    Full Text Available Este projeto relata a implantação de um serviço de saúde mental por meio de parceria do Instituto de Psiquiatria do Hospital das Clínicas da Faculdade de Medicina da Universidade de São Paulo com a Prefeitura do Município de Porto Nacional, Estado de Tocantins. Na região havia poucos serviços de saúde mental, praticamente com ausência de assistência num raio de 500 km. Foi realizado por equipe formada por médicos residentes, psicólogos e aprimorandos de Psicologia, que auxiliaram na implantação de um Núcleo de Atenção Psicossocial (NAPS e de diversos serviços à comunidade local. Os benefícios foram inúmeros à comunidade e aos participantes.The beginning and organization of a Mental Health Service through cooperation between The Institute and Department of Psychiatry - University of São Paulo and the city of Porto Nacional, Tocantins, Central Brazil There was no systematic mental health assistance in this region. The project was developed by psychiatric residents, psychologists and psychology trainees who through volunteer work helped to organize a mental health service and assistance to the community. Benefits for the community and the volunteer workers were discussed.

  16. Production of muscovite-feldspathic glass composite: scanning electron microscopy and X-ray diffraction analysis; Producao de composito moscovita-vidro feldspatico: microscopia eletronica de varredura e analise de difracao de raios X

    Energy Technology Data Exchange (ETDEWEB)

    Costa, F.P.F.; Ogasawara, T.; Santos, S.F. [Universidade Federal do Rio de Janeiro (PEMM/COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao em Engenharia. Programa de Engenharia Metalurgica e de Materiais; Franca, S.C.A.; Barbato, C.N [Centro de Tecnologia Mineral(CETEM/MCT), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    The objective of this work was to find the sintering conditions for the feldspathic glass + muscovite mixture to produce a dense composite block for manufacturing dental prosthesis by using CAD-CAM. Each 20g of the glass-frit had : 15.55g of Armil-feldspar; 0.53g of Al{sub 2}O{sub 3}; 1.56g of Na{sub 2}CO{sub 3}; 0.5g of borax; 1.74g of K{sub 2}CO{sub 3}; 0.13g of CeO{sub 2}. Frit's powder finer than 350 Tyler mesh was mixed with 0 wt%, 10 wt%, 20 wt% and 100 wt% of muscovite pressed cylinders (5600 pounds force) 16mm in diameter and sintered under vacuum Vacumat (VITA) furnace at 850 deg C, 900 deg C, 950 deg C, 1000 deg C, 1050 deg C, 1100 deg C and 1150 deg C. X-ray diffraction analysis and scanning electron microscopy were carried out. The necessary temperature for high densification depended on the composition of the mixture: 850 deg C (for pure frit); 1050 deg C (for 10 wt% mica) and 1150 deg C (for 20 wt% mica); pure mica degraded during sintering. (author)

  17. The system NaVO3-Na2WO4-Na2W2O7

    International Nuclear Information System (INIS)

    Kazanbekov, V.R.; Gasanaliev, A.M.; Kazanbekov, R.G.

    1994-01-01

    Phase diagrams of sodium metavanadate-sodium ditungstate, sodium metavanadate-sodium tungstate systems and surface of primary crystallization of sodium metavabadate-sodium tungstate-sodium ditungstate system were studied. The system sodium metavanadate-sodium ditungstate is eutectic one. Compound NaVO 3 x2Na 2 WO 4 is formed in solid state in sodium metavanadate-sodium tungstate system. Liquidus surface of sodium metavanadate-sodium tungstate-sodium ditungstate is presented by three crystallization fields of initial components. Composition and melting point of ternary eutectics are determined

  18. Efeito de diferentes tipos de argilas e modificadores orgânicos na morfologia e propriedades térmicas dos nanocompósitos de PET Effect of different types of clays and organic modifiers on the morphology and thermal properties of PET nanocomposites

    OpenAIRE

    Itamara Farias Leite; Oscar Loureiro Malta; Claudia M. O. Raposo; Luís Eduardo Canedo; Laura H. de Carvalho; Suédina M. de L. Silva

    2011-01-01

    Argilas bentoníticas natural e purificada (AN e AP) e montmorilonita (MMT), modificadas organicamente com os sais alquil amônio (A), alquil fosfônio (F) e com uma mistura de ambos (A e F), foram incorporadas, em teor de 1% em massa, ao PET pelo processo de fusão. Os híbridos obtidos foram caracterizados por difratometria de raios X (DRX), termogravimetria (TG), calorimetria exploratória diferencial (DSC) e microscopia eletrônica de transmissão (MET). Nanocompósitos com morfologia intercalada ...

  19. Measurement of direct CP-violation with the experiments NA31 and NA48 at CERN

    International Nuclear Information System (INIS)

    Renk, B.

    1992-01-01

    The NA31 experiment has measured the CP violation parameter var-epsilon '/var-epsilon. The result of data collected in 1988 is Re(var-epsilon '/var-epsilon)=(1.7±1.0)x10 -3 . A preliminary result of data collected in 1989 is Re(var-epsilon '/var-epsilon)=(2.1±0.9)x10 -3 . Combining these two results with the original result from the 1986 data set we obtain Re(var-epsilon '/var-epsilon)=(2.3±0.7)x10 -3 , which is a more than three standard deviation evidence for direct CP violation. A new experiment NA48 is under construction which aims for a significant reduction of the statistical and the systematical errors in order to reach a combined error not exceeding 2x10 -4

  20. Formation of hydroxyl groups and exchange with deuterium on NaHX and NaHY zeolites

    International Nuclear Information System (INIS)

    Kubelkova, L.; Novakova, J.

    1976-01-01

    Deammoniation and dehydroxylation of Na(NH 4 )X and Na(NH 4 )Y zeolites were compared. With the X type, both processes overlapped and proceeded more easily than with the Y type. Both H forms contained structural OH groups and hydroxyls denoted as SiOH, to which the 3740 cm -1 band in the IR spectrum was assigned. In addition, the NaHX zeolite contained OH groups characterized by the 3700 and 3600 cm -1 bands. Certain differences in the behaviour of NaHX and NaHY zeolites during deammoniation and dehydroxylation might be attributed to the presence of ''non-localizable'' H atoms. The active sites for the D 2 -OH exchange were probably formed during dehydroxylation. Hydrogen in SiOH groups was replaced by deuterium in both zeolite types more slowly than H atoms in other OH groups, which influenced the kinetic variations in the gaseous phase. The presence of water in the gaseous phase affected the kinetics and could distort the determination of the number of H atoms bound in the zeolites. (author)

  1. OCORRÊNCIA E CARACTERIZAÇÃO DO AMIDO RESISTENTE EM AMIDOS DE MILHO E DE BANANA

    Directory of Open Access Journals (Sweden)

    Teixeira Maria A.V.

    1998-01-01

    Full Text Available No presente trabalho foi estudada a ocorrência de Amido Resistente (AR em amidos de milho e de banana (naturalmente resistente e investigado o efeito das variáveis: umidade de condicionamento, tempo e temperatura de armazenamento dos géis, na formação do AR em amido normal de milho; além das características físico-químicas e a estrutura fina do AR de milho e de banana. Foi observado que o teor de AR em amidos de milho e banana (2,5% e 49,61%, respectivamente parece não estar relacionada com a composição química do grânulo. O amido de banana apresentou grânulos com certo poliformismo, padrão de raio-x tipo B, além de uma fração linear de DP 34 resistente à b-amilólise. A estrutura cristalina que mantém o grânulo do amido de banana coeso, por si só, não explicou o alto teor de AR encontrado. O amido de milho normal apresentou formas poliédricas e padrão difração em raio-x tipo A. Não foi observada a fração com DP 34 resistente à b-amilólise, apesar da sua maior coesividade quando comparado ao amido de banana. O tratamento hidrotérmico aplicado no amido normal de milho quase triplicou o teor de AR (7,15% devido à formação de estruturas cristalinas coesas. O AR de milho (7,15% de AR, constituído por fragmentos porosos, apresentou padrão de difração tipo C. A não significância do tempo de armazenamento dos géis na produção do AR e a fração linear com DP 34 resistente à b-amilólise presente nos cromatogramas, sugerem a participação da amilose na formação desta estrutura resistente.

  2. STRES NA DELOVNEM MESTU V TRGOVSKI ORGANIZACIJI X

    OpenAIRE

    Kureš, Anita

    2012-01-01

    Stres je tegoba sedanjega časa. Zmeraj več ljudi trpi za posledicami stresa na delovnem mestu, saj nam delo povzroča preveliko odgovornost, njemu tudi namenimo večino svojega časa, kar nam posledično zmanjšuje čas za sprostitev. Tako nam primanjkuje časa za zabavo, druženje s prijatelji, sprehode v naravi, telesno aktivnost in druge možnosti za sprostitev. Življenje nam prinaša nenehno nove izzive in obremenitve, pritiske, bojazni, ki sčasoma kopičijo stres v našem telesu. Vse to se nam odraž...

  3. A novel energy transfer inducing strong enhancement of electric dipole transition in Na3Mo12PO40:xEu3+ phosphors

    Science.gov (United States)

    Long, Jinqiao; Wang, Tianman; Luo, Zhirong; Gao, Yong; Song, Baoling; Liang, Jing; Liao, Sen; Huang, Yingheng; Zhang, Huaxin

    2017-08-01

    A series of Na3Mo12PO40:xEu3+ phosphors have been successfully synthesized by a solid-state method, and characterized by powder x-ray diffraction (PXRD). The PXRD results confirm that the samples have crystal phases of Na3Mo12PO40. For PL spectra of Na3Mo12PO40:2.0Eu3+ excited by 394 and 465 nm, R (R is the peak area ratio of 5D0  →  7F2 to 5D0  →  7F1) is only 1.46 with an excitation of 394 nm, but increases to 3.03 with an excitation of 465 nm. Furthermore, a new enhancement of electric dipole transition is observed. Emission spectrum (PL) intensity at 617 nm excited by 465 nm is 1.95 times as high as the excitation spectrum (PLE) intensity at 465 nm. Thus, cooperative energy transfers from the magnetic dipole (MD) Eu3+ center to the electric dipole (ED) Eu3+ center when excited by 465 nm is demonstrated for the new fluorescent behavior.

  4. Efeito da cobertura viva com leguminosas herbáceas perenes na agregação de um argissolo

    Directory of Open Access Journals (Sweden)

    A. Perin

    2002-09-01

    Full Text Available O presente trabalho foi desenvolvido na área do Campo Experimental da Embrapa Agrobiologia, Seropédica (RJ, com o objetivo de avaliar a morfologia e a distribuição de raízes de algumas leguminosas herbáceas perenes; os efeitos da cobertura viva no teor de carbono orgânico, e a agregação de um Argissolo Vermelho-Amarelo distrófico, medida pela estabilidade dos agregados em água. O delineamento experimental adotado foi o de blocos casualizados, com três repetições. Os tratamentos consistiram de três diferentes espécies de leguminosas herbáceas perenes e um tratamento-controle sem cobertura viva (capinado. As leguminosas utilizadas foram amendoim forrageiro (Arachis pintoi, cudzu tropical(Pueraria phaseoloides e siratro (Macroptilium Atropurpureum. Para a estabilidade de agregados, as profundidades de amostragem foram 0-5 e 5-10 cm, enquanto, para a morfologia e distribuição radicular, as avaliações consistiram das profundidades 0-5, 5-10, 10-20 e 20-40 cm. As coberturas com as leguminosas amendoim forrageiro e cudzu tropical propiciaram os maiores valores percentuais na classe de agregados > 2,00 mm, em média 38 % superiores aos obtidos na área capinada. Os valores do diâmetro médio ponderado (DMP dos agregados no solo com cobertura de leguminosas foram superiores aos da área capinada para ambas as camadas, o que demonstra o efeito favorável das coberturas vivas na estabilização dos agregados do solo. A cobertura viva de amendoim forrageiro proporcionou incremento no teor de carbono orgânico no solo. Quanto aos atributos morfológicos das raízes, verificou-se que o amendoim forrageiro apresentou raio radicular intermediário entre as demais espécies e área e massa radicular maiores, o que auxiliou na interpretação do efeito positivo da cobertura viva com essa espécie na agregação do solo.

  5. Piezoelectric Ceramics of the (1 − x)Bi0.50Na0.50TiO3–xBa0.90Ca0.10TiO3 Lead-Free Solid Solution: Chemical Shift of the Morphotropic Phase Boundary, a Case Study for x = 0.06

    Science.gov (United States)

    Vivar-Ocampo, Rodrigo; Pardo, Lorena; Ávila, David; Morán, Emilio; González, Amador M.; Bucio, Lauro; Villafuerte-Castrejón, María-Elena

    2017-01-01

    Research and development of lead-free piezoelectric materials are still the hottest topics in the field of piezoelectricity. One of the most promising lead-free family of compounds to replace lead zirconate–titanate for actuators is that of Bi0.50Na0.50TiO3 (BNT) based solid solutions. The pseudo-binary (1 − x)Bi0.50Na0.50TiO3–xBa1 − yCayTiO3 system has been proposed for high temperature capacitors and not yet fully explored as piezoelectric material. In this work, the solid solution with x = 0.06 and y = 0.10 was obtained by two different synthesis routes: solid state and Pechini, aiming at using reduced temperatures, both in synthesis (<800 °C) and sintering (<1150 °C), while maintaining appropriated piezoelectric performance. Crystal structure, ceramic grain size, and morphology depend on the synthesis route and were analyzed by X-ray diffraction, together with scanning and transmission electron microscopy. The effects of processing and ceramic microstructure on the structural, dielectric, ferroelectric, and piezoelectric properties were discussed in terms of a shift of the Morphotropic Phase Boundary, chemically induced by the synthesis route. PMID:28773096

  6. Efeito compatibilizante de uma argila organofílica na blenda PLA/terpolímero (etileno/acrilato de metila/metacrilato de glicidila

    Directory of Open Access Journals (Sweden)

    Gustavo F. Brito

    2013-01-01

    Full Text Available Neste trabalho, nanocompósitos obtidos a partir de blendas entre o poli (ácido lático e o terpolímero (etileno/acrilato de metila/metacrilato de glicidila foram confeccionados. A argila organofílica comercial Cloisite 20A foi utilizada como nanocarga. Interações entre a argila e o terpolímero foram investigadas por reometria de torque. As estruturas dos nanocompósitos foram determinadas por difração de raios X, sendo obtidos nanocompósitos intercalados e microcompósitos. A atuação da argila como agente compatibilizante foi evidenciada por fotomicrografias obtidas por microscopia eletrônica de varredura. As propriedades mecânicas das blendas mostraram-se dependentes tanto da morfologia como do grau de dispersão da argila.

  7. Development of a handmade device for collimation and central ray alignment tests in medical X-ray equipment; Desenvolvimento de um dispositivo artesanal para os testes de colimação e alinhamento do raio central em equipamentos médicos de raios X

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, B.L. da; Brito, E.B.; Gomes, A.S., E-mail: elizabethberbr@live.com [Universidade José de Souza Herdy (UNINGRANRIO), Nova Iguaçu, RJ (Brazil)

    2017-07-01

    Ordinance 453/98 of the Ministry of Health establishes that medical X-ray equipment should be monitored by tests that prove its efficiency. This practice is called quality control (QC), and two important tests jointly evaluate the operation of the collimation and alignment systems of the central axis of the X-ray beam. The low supply and the high cost generate allegations of difficulties in the periodic realization of the tests. The aim of this work is to design, make and evaluate the performance of a handmade device for the mentioned tests, using low cost materials. Once built, the device had its performance evaluated and compared with the traditionally marketed device. The handmade device proved to be fit in its functions. It is possible to make a device that tests X-ray medical equipment, using the radiology technologist himself as the test runner. Radiation protection is promoted and legislation with no real financial burden.

  8. DENUDAÇÃO QUÍMICA E REBAIXAMENTO DO RELEVO EM BORDAS INTERPLANÁLTICAS COM SUBSTRATO GRANÍTICO: DOIS EXEMPLOS NO SE DE MINAS GERAIS

    Directory of Open Access Journals (Sweden)

    Luis Felipe Soares Cherem

    2012-08-01

    Full Text Available Os interflúvios entre as grandes bacias hidrográficas do Brasil oriental correspondem, muitas vezes, a degraus morfológicos que dividem planaltos escalonados. Esses degraus são feições escarpadas resultantes da diferença de intensidade dos processos erosivos nas cabeceiras dessas grandes bacias. Esse artigo apresenta um estudo da denudação química em dois degraus dessas bordas interplanálticas localizadas no sudeste de Minas Gerais: (i o degrau de Cristiano Otoni (250m divisor das bacias dos rios São Francisco (terras altas ou planalto superior e Doce (terras baixas ou planalto inferior e, (ii o degrau de São Geraldo (450m que divide as bacias dos rios Doce (terras altas ou planalto superior e Paraíba do Sul (terras baixas ou planalto inferior. Para entender a dinâmica da denudação química nessas bordas escarpadas, foram monitorados o total de sólidos dissolvidos (TDS, o Eh, o pH, a vazão de 21 bacias hidrográficas distribuídas ao longo de ambas vertentes dos degraus (terras altas e frente da escarpa no final dos períodos chuvoso (abril e de estiagem (agosto em um mesmo ano hidrológico (2009. As bacias amostradas situam-se sobre o mesmo substrato litológico (granitóides. Utilizando os dados de TDS e vazão foram calculadas as taxas de denudação química (ton.ano-1.km-² e as taxas médias de rebaixamento do relevo (m.Ma-1 para as bacias amostradas. Os resultados revelaram que as águas fluviais dos degraus estudados apresentam assinaturas geoquímicas distintas: (i nas terras altas, os valores de pH são sempre ácidos (≈ 6,35 e nas escarpas, levemente básicos (≈ 7,10; (ii os valores de TDS (carga dissolvida nas terras altas (≈ 10,00 mg.L-1 são menores que os encontrados nos frente das escarpas (≈ 35,00 mg.L-1 para São Geraldo e, ≈ 18,00 mg.L-1 para Cristiano Otoni. As taxas de rebaixamento do relevo ocasionadas pela denudação química são semelhantes em ambas as terras altas (≈ 2,40 m.Ma-1. Em

  9. Sobrevivência de plântulas transplantadas de uma floresta tropical madura para viveiro de mudas na bacia do rio Xingu. Survival of seedlings transplanted from a mature tropical forest to nursery in Xingu river basin.

    Directory of Open Access Journals (Sweden)

    Roberta Thays dos Santos CURY

    2013-06-01

    Full Text Available A utilização da diversidade de plântulas de espécies arbóreas, oriundas de áreas cuja vegetação teve a supressão autorizada, no enriquecimento de viveiros, tem sido recomendada como uma técnica alternativa na produção de mudas. Neste trabalho, avaliamos a sobrevivência de plântulas transplantadas da regeneração natural de uma floresta madura para um viveiro de mudas em uma área de transição Amazônia-Cerrado, Mato Grosso, Brasil. Foram alocados três transectos de 10 x 1 m, com 10, 50 e 500 m de distância da borda de onde foram coletados todos os indivíduos lenhosos entre 5-20 cm de altura, no período da manhã (7h às 9h, e sequencialmente plantados em sacos plásticos. Os indivíduos foram identificados, quantificados e classificados quanto ao estágio sucessional. A sobrevivência das plântulas foi avaliada durante quatro meses. No total foram coletados 1.179 indivíduos arbóreos pertencentes a 48 espécies, 31 gêneros e 23 famílias, dos quais 71% sobreviveram. No conjunto dos dados, houve um aumento gradativo na abundância e riqueza de espécies arbóreas da borda para o interior da floresta, sendo maior a 500 m. A abundância e o número de espécies não pioneiras coletadas foram maiores que as pioneiras. Os resultados apontam elevadas taxas de sobrevivência e que a técnica de transplante pode facilitar o enriquecimento de viveiros com espécies regionais de difícil obtenção e de diferentes grupos funcionais. The use of the diversity of tree species, present in areas where vegetation removal had been authorized, as means of nursery enrichment, has been recommended as an alternative technique for seedling production. The aim of this study was to evaluate the survival rate of transplanted seedlings, from natural regeneration in mature forests, to the nursery. Seedlings were obtained from three 10 x 1 m transects allocated in Amazon transitional forest in Mato Grosso state, Brazil. All woody individuals with

  10. Caulins amazônicos: possíveis materiais de referência

    Directory of Open Access Journals (Sweden)

    S. C. A. dos Santos

    2013-09-01

    Full Text Available Caulim é um produto originado pela ação do intemperismo de silicatos de alumínio como os feldspatos, que na região amazônica é favorecida pelo clima quente e úmido. Usado na fabricação de materiais refratários, cimentos, fármacos, catalisadores, cobertura e enchimentos de papel e outras diversas finalidades. Este trabalho tem como objetivo a caracterização e a comparação de caulins de coberturas e in natura de diferentes regiões do Pará (Rio Capim, Jarí e Vila do Conde de origens sedimentares com caulins utilizados como materiais de referência (IPT-28, IPT-32, IPT-42, KGa-1b e KGa-2. Nas caracterizações foram utilizados métodos de análise química, física e mineralógica como: Análise de tamanho de partícula, Difração de raios X, Fluorescência de raios X, Microscopia Eletrônica de Varredura, Análise Térmica Diferencial. Os resultados mostraram como principal fase mineral em todos os caulins estudados a caulinita, com diferentes graus de "cristalinidade". Os caulins amazônicos apresentaram-se com alto e baixo grau de ordem estrutural, assim como os materiais de referências. No que se referem às propriedades de composição química, ambos os materiais apresentaram teores de SiO2 + Al2O3 acima de 90%, teores de Na2O e TiO2 muito baixos, em média 0,6% e 1,92%, respectivamente para os materiais de referência, e para os amazônicos foram de Na2O 0,3% e 1,62% para TiO2. Quanto à análise de tamanho de partícula, observaram-se variações de D50 = 0,7 a 9 µm para os da Amazônia e D50 = 1,7 a 6 µm para os de referência. Os caulins amazônicos sedimentares por mostrarem baixos teores de impurezas e por serem encontrados em grandes quantidades, sugerem um forte potencial para utilização como caulins de referência.

  11. Cinza da lenha para aplicação em cerâmica vermelha. parte I: características da cinza Firewood ash for application in red ceramic. part I: characteristics of the ash

    Directory of Open Access Journals (Sweden)

    M. C. Borlini

    2005-09-01

    Full Text Available A lenha de eucalipto constitui-se no principal combustível utilizado pelas indústrias de cerâmica vermelha do município de Campos dos Goytacazes, Estado do Rio de Janeiro. Em princípio, esta lenha tem características promissoras para adição em cerâmica. Assim, esse trabalho tem por objetivo caracterizar a cinza proveniente da combustão de lenha predominantemente de eucalipto visando a incorporação na massa de cerâmica vermelha processada em indústrias de Campos dos Goytacazes. Foram realizados ensaios de fluorescência de raios X, difração de raios X, distribuição de tamanho de partícula, análise térmica (ATD/TG, porosimetria de mercúrio e microscopia eletrônica de varredura. Os resultados mostraram que a cinza da lenha se apresenta como aglomerados de partículas, sendo constituída principalmente por Ca, Si, Mg, K e S.The eucalyptus firewood is one of the main fuels used by the industries of red ceramic in the municipal area of Campos of Goytacazes, State of Rio de Janeiro. In principle this firewood has promising characteristics for addition into ceramics. Thus, the present work has for objective to characterize the ash generated from burning firewood aiming at its incorporation into red ceramic products. The ash was submitted to X-ray diffraction, chemical composition, particle size distribution, thermal analysis (ATD/TG, mercury porosimetry and scanning electron microscopy tests. The results showed that the ash of the firewood comes as agglomerates of particles, being constituted mainly by Ca, Si, Mg, K and S.

  12. RADIOEMISSÕES SOLARES TIPO II ASSOCIADAS A FLARES E CMES

    Directory of Open Access Journals (Sweden)

    Rafael Douglas Cunha-Silva

    2013-12-01

    Full Text Available Atribuídas a ondas de choque e a ejeções de plasmoide, as emissões solares tipo II são ondaseletromagnéticas geradas a partir de oscilações do plasma coronal. A origem dos choques associados a essasemissões é ainda uma questão em aberto da física solar. Enquanto alguns trabalhos sugerem os flares solarescomo seus acionadores, outros fornecem indícios de serem as ejeções de massa coronal (CMEs sua origemmais provável. Este trabalho apresenta os resultados da análise de duas emissões tipo II, registradas por doisespectrômetros da rede e-CALLISTO (extended-Compound Astronomical Low-cost Low-frequency Instrument forSpectroscopy and Transportable Observatory, os quais operam na faixa de frequências de 45-870 MHz. Oprimeiro evento, observado em 13 de junho de 2010, às 05:38 UT, apresentou uma taxa de deriva em frequênciade -0,2 MHz s-1, correspondente a uma velocidade de choque de 528 km s-1, estando, temporalmente, associadoa uma CME lenta (~320 km s-1 e a um flare solar em raios-X, classe M1.0. O segundo evento, observado em 09de Agosto de 2011, às 08:02 UT, apresentou uma taxa de deriva em frequência de -1,4 MHz s-1, correspondentea uma velocidade de choque de 1375 km s-1, estando, temporalmente, associado a uma CME tipo halo (~1610km s-1 e a um flare solar em raios-X, classe X6.9. Os resultados obtidos, para os parâmetros observacionais dasemissões tipo II e para os parâmetros físicos de suas fontes, são discutidos no contexto de sua relação com seuflares e CMEs associados.

  13. Computerized tomography with X-rays: an instrument in the analysis physico-chemical between formations and drilling fluids interactions; Tomografia computadorizada com raios-X: uma ferramenta na analise das interacoes fisico-quimicas entre as formacoes rochosas e fluidos de perfuracao

    Energy Technology Data Exchange (ETDEWEB)

    Coelho, Marcus Vinicius Cavalcante

    1999-12-31

    In this study it is demonstrated the applicability of the Computerized Tomography technique with x-rays to evaluate the reactivity degree between various drilling fluids and argillaceous sediments (Shales and Sandstones). The research has been conducted in the Rock-Fluid Interaction Pressure Simulator (RFIPS), where the possible physico-chemical alterations can be observed through successive tomography images, which are obtained during the flow of the fluid through the samples. In addition, it was noticed the formation of mud cake in Berea Sandstones samples in the RFIPS, though the Computerized Tomography with X-rays, when utilizing drilling fluids weighted with the baryte. (author) 35 refs., 38 figs., 5 tabs.

  14. Computerized tomography with X-rays: an instrument in the analysis physico-chemical between formations and drilling fluids interactions; Tomografia computadorizada com raios-X: uma ferramenta na analise das interacoes fisico-quimicas entre as formacoes rochosas e fluidos de perfuracao

    Energy Technology Data Exchange (ETDEWEB)

    Coelho, Marcus Vinicius Cavalcante

    1998-12-31

    In this study it is demonstrated the applicability of the Computerized Tomography technique with x-rays to evaluate the reactivity degree between various drilling fluids and argillaceous sediments (Shales and Sandstones). The research has been conducted in the Rock-Fluid Interaction Pressure Simulator (RFIPS), where the possible physico-chemical alterations can be observed through successive tomography images, which are obtained during the flow of the fluid through the samples. In addition, it was noticed the formation of mud cake in Berea Sandstones samples in the RFIPS, though the Computerized Tomography with X-rays, when utilizing drilling fluids weighted with the baryte. (author) 35 refs., 38 figs., 5 tabs.

  15. Short range structural models of the glass transition temperatures and densities of 0.5Na2S + 0.5[xGeS2 + (1 - x)PS5/2] mixed glass former glasses.

    Science.gov (United States)

    Bischoff, Christian; Schuller, Katherine; Martin, Steve W

    2014-04-03

    The 0.5Na2S + 0.5[xGeS2 + (1 - x)PS5/2] mixed glass former (MGF) glass system exhibits a nonlinear and nonadditive negative change in the Na(+) ion conductivity as one glass former, PS5/2, is exchanged for the other, GeS2. This behavior, known as the mixed glass former effect (MGFE), is also manifest in a negative deviation from the linear interpolation of the glass transition temperatures (T(g)) of the binary end-member glasses, x = 0 and x = 1. Interestingly, the composition dependence of the densities of these ternary MGF glasses reveals a slightly positive MGFE deviation from a linear interpolation of the densities of the binary end-member glasses, x = 0 and x = 1. From our previous studies of the structures of these glasses using IR, Raman, and NMR spectroscopies, we find that a disproportionation reaction occurs between PS7/2(4-) and GeS3(2-) units into PS4(3-) and GeS5/2(1-) units. This disproportionation combined with the formation of Ge4S10(4-) anions from GeS5/2(1-) groups leads to the negative MGFE in T(g). A best-fit model of the T(g)s of these glasses was developed to quantify the amount of GeS5/2(1-) units that form Ge4S10(4-) molecular anions in the ternary glasses (∼ 5-10%). This refined structural model was used to develop a short-range structural model of the molar volumes, which shows that the slight densification of the ternary glasses is due to the improved packing efficiency of the germanium sulfide species.

  16. Gradientes térmicos em whitetopping ultradelgado na pista experimental instrumentada na USP

    Directory of Open Access Journals (Sweden)

    Deividi da Silva Pereira

    2009-12-01

    Full Text Available

    Este trabalho apresenta, primeiramente, uma sucinta descrição da execução de um trecho experimental de Whitetopping Ultradelgado (WTUD no campus da Universidade de São Paulo (USP bem como de sua instrumentação. São apresentados e discutidos os resultados referentes a temperaturas obtidos por esta instrumentação durante o outono, analisando as diferenças encontradas nos diferenciais térmicos para placas de diferentes dimensões, obtidos por termoresistores instalados nos cantos, bordas e centro das mesmas. Com base em medidas de deformação obtidas por strain-gages são avaliados valores típicos das tensões induzidas no WTUD pelo efeito isolado do gradiente térmico sobre as placas de concreto de cimento Portland (CCP.

  17. NaI(Tl) detectors modeling in MCNP-X and Gate/Geant4 codes

    Energy Technology Data Exchange (ETDEWEB)

    Affonso, Renato Raoni Werneck; Silva, Ademir Xavier da, E-mail: raoniwa@yahoo.com.br, E-mail: ademir@nuclear.ufrj.br [Coordenacao de Pos-Graduacao e Pesquisa de Engenharia (PEN/COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear; Salgado, Cesar Marques, E-mail: otero@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2017-07-01

    NaI (Tl) detectors are widely used in gamma-ray densitometry, but their modeling in Monte Carlo codes, such as MCNP-X and Gate/Geant4, needs a lot of work and does not yield comparable results with experimental arrangements, possibly due to non-simulated physical phenomena, such as light transport within the scintillator. Therefore, it is necessary a methodology that positively impacts the results of the simulations while maintaining the real dimensions of the detectors and other objects to allow validating a modeling that matches up with the experimental arrangement. Thus, the objective of this paper is to present the studies conducted with the MCNPX and Gate/Geant4 codes, in which the comparisons of their results were satisfactory, showing that both can be used for the same purposes. (author)

  18. Simulação geoestatística na caracterização espacial de óxidos de ferro em diferentes pedoformas

    Directory of Open Access Journals (Sweden)

    João Fernandes da Silva Junior

    2012-12-01

    Full Text Available Os minerais da fração argila, goethita e hematita, são óxidos de ferro (Fe indicadores pedoambientais com grande influência nos atributos físicos e químicos do solo. O conhecimento dos padrões espaciais desses óxidos auxilia a compreensão das interrelações de causa e efeito com os atributos do solo. Nesse sentido, a qualidade das estimativas espaciais produzidas pode alterar os resultados obtidos e, por consequência, as interpretações dos padrões espaciais obtidos. O presente estudo teve o objetivo de avaliar o desempenho dos métodos geoestatísticos de estimativas (KO e simulações sequenciais gaussianas (SSG na caracterização espacial de teores de óxidos de Fe, goethita (Gt e hematita (Hm, em uma pedoforma côncava e outra convexa. Foram coletadas 121 amostras de solos em cada pedoforma de um Argissolo em pontos com espaçamentos regulares de 10 m. Os teores de óxidos de Fe foram obtidos por meio de difração de raios-X. Os dados foram submetidos a análises geoestatísticas por meio da modelagem do variograma e posterior interpolação por KO e SSG. A KO não refletiu a verdadeira variabilidade dos óxidos de Fe, hematita e goethita, demonstrando ser inapropriada para a caracterização espacial dos teores dos óxidos de Fe. Assim, o uso da SSG é preferível à krigagem quando a manutenção dos altos e baixos valores nas estimativas espaciais é necessária. O desempenho dos métodos geoestatísticos foi influenciado pelas pedoformas. Os mapas E-type devem ser recomendados em vez de mapas de KO para os óxidos de Fe, por serem ricos em detalhes e práticos na definição de zonas homogêneas para o manejo localizado em frente de KO, sobretudo em pedoforma côncava.

  19. Break-up of Ca-montmorillonite particles by Na-montmorillonite

    International Nuclear Information System (INIS)

    Hedstroem, Magnus; Birgersson, Martin

    2012-01-01

    -ionic clays are 490 and 120 NTU for Wy-Ca and Wy-Na respectively. The turbidity value for Ca-montmorillonite is actually preparation dependent. A mixed suspension of volume V with calcium fraction X Ca is obtained by mixing X Ca .V + (1-X Ca ).V. If the two types of clay were unaffected by the mixing then the expected turbidity of the mixed suspension would be a linear superposition, i.e., Turb(X Ca ) = X Ca . Turb(Ca)+(1-X Ca ).Turb(Na) as illustrated in the figure. However, the measured turbidities show large non-linearity and lie below the linear response. For X Ca ≤0.6 the turbidity is close to that of homo-ionic Wy-Na showing that the particle size (here referring to tactoid size) of Wy-Ca/Na does not differ significantly from homo-ionic Wy-Na. Evidently by just mixing Ca-montmorillonite with Na-montmorillonite the tactoids that are present in Wy-Ca break up. One could envisage that at high Ca fractions the mixing process could work in the opposite direction so the mixed montmorillonite would behave more like Wy-Ca. In that case the measured turbidity would lie above the linear superposition line. From Figure 1 we see instead that Turb(X Ca =0.9) lie close to the superposition line and Turb(X Ca =0.8) clearly falls below. Still the higher turbidity of the clay with X Ca =0.8 compared to homo-ionic Wy-Na indicates incomplete delamination or dispersion, which is also in accord with the observation of the 19 A diffraction peak also at low dry densities [4]. The mixing and break-up of Ca-montmorillonite by Na-montmorillonite is also demonstrated using centimetre-sized clay pieces of high density. These experiments show the qualitative difference between a homo-ionic Ca-montmorillonite and mixed Ca/Na-montmorillonite with X Ca <0.9. In homo-ionic Ca-montmorillonite the sol phase is virtually absent which is consistent with the fact that erosion of Ca-montmorillonite is never observed. (authors)

  20. Analysis of agricultural soils by using energy dispersive X-ray fluorescence; Analise de solos agricolas por fluorescencia de raios-X por dispersao de energia

    Energy Technology Data Exchange (ETDEWEB)

    Anjos, Marcelino Jose dos

    2000-03-01

    In this work, we describe an Energy Dispersive x-ray Fluorescence System with a x-ray tube excitation for trace analysis of environmental samples (soil). The system was used to analyze the contamination of metals in treated soils with doses of 10, 20 and 30 ton/ha of compound organic of urban garbage of the type Fertilurb and 10 ton/ha of aviary bed (manure of birds). Samples of roots and foliages of plant radishes cultivated in these soils were also analyzed. The soil samples were collected in five different depths of 0,5, 5-10, 10-20, 20-40 and 40-60 cm. The experimental set-up is composed by an OXFORD X-ray (30 kV, 50 {mu}A and W anode), an ORTEC Si-Li detector, with an energy resolution of about 180 eV at 5.9 keV and an ORTEC multichannel-analyser. The X-ray spectrum tube is quasi-monochromatic by using of Ti filter. Samples were prepared in pellet form with superficial density in the range of 100 mg/cm{sup 2}. The fundamental parameter method was used in order to verify the elemental concentration. It was possible to determine the concentrations of thirteen elements: K, Ca, Ti, Mn, Fe, Cu, Zn, Br, Rb, Sr, Y, Zr and Pb in the treated soils with compounds organic. The results indicate that the values found for K, Ca, Rb, Sr, Zr and Pb are significantly above the upper confidence limits for the control soil ({alpha} = 0.05). There is a real different between these elements compared to their relationship in the control soils, ({alpha}=0,05). There is a real difference between these elements compared to their relationship in the control soils, confirming the influence of the organic compounds in the soil. (author)

  1. Study of the corrosion behavior and the corrosion films formed on the surfaces of Mg–xSn alloys in 3.5 wt.% NaCl solution

    International Nuclear Information System (INIS)

    Wang, Jingfeng; Li, Yang; Huang, Song; Zhou, Xiaoen

    2014-01-01

    Highlights: • Corrosion of four cast Mg–xSn alloys in 3.5 wt.% NaCl solution was investigated. • Both Mg(OH) 2 /SnO 2 corrosion product film and Mg(OH) 2 /MgSnO 3 clusters formed on Mg–1.5Sn. • Compact Mg(OH) 2 /MgSnO 3 film suppressed the cathodic effect of the impurity inclusions. • Mg–xSn (x = 0.5, 1.0, 2.0 wt.%) alloys only formed loose Mg(OH) 2 /SnO 2 corrosion product film. - Abstract: The corrosion behavior and the corrosion films formed on the surfaces of Mg–xSn (x = 0.5, 1.0, 1.5, and 2.0 wt.%) alloys in 3.5 wt.% NaCl solution were investigated by immersion tests, electrochemical measurements, corrosion morphology observations, and X-ray diffraction analysis. Immersion tests and electrochemical measurements illustrated that the best corrosion resistance was reported for the Mg–1.5Sn alloy. Both Mg(OH) 2 /SnO 2 corrosion product film and Mg(OH) 2 /MgSnO 3 clusters formed on Mg–1.5Sn alloy surface. Mg(OH) 2 /MgSnO 3 clusters were compact and suppressed the cathodic effect of the impurity inclusions greatly. The Mg–xSn (x = 0.5, 1.0, and 2.0 wt.%) alloys only formed loose Mg(OH) 2 /SnO 2 corrosion product film during the corrosion process

  2. Síntese de acetato de celulose a partir da palha de feijão utilizando N-bromossuccinimida (NBS como catalisador

    Directory of Open Access Journals (Sweden)

    Sarah S. Brum

    2012-01-01

    Full Text Available Neste estudo a celulose obtida da palha de feijão foi utilizada para produzir um material hidrofóbico (acetato de celulose para ser avaliado como absorvente de óleo. Nas reações de acetilação foram utilizados anidrido acético e dois catalisadores, a piridina (PY e N-bromossuccinimida (NBS. Os materiais produzidos foram caracterizados por espectroscopia na região do infravermelho médio, microscopia eletrônica de varredura, difratometria de raios-X e análise elementar. O NBS mostrou-se mais eficiente que a PY e, seu uso resultou em materiais com maiores quantidades de grupos acetatos, mais hidrofóbicos e com maiores capacidades de absorção de óleo de soja.

  3. Thermal expansion of NZP-family alkali-metal (Na, K) zirconium phosphates

    International Nuclear Information System (INIS)

    Orlova, A.I.; Kemenov, D.V.; Pet'kov, V.I.; Samojlov, S.G.; Kazantsev, G.N.

    2000-01-01

    By means of high-temperature X-ray diffraction one investigated into thermal expansion of alkali-zirconium phosphates crystallizing in NaZr 2 (PO 4 ) 3 structure type within 20-700 deg C temperature range. One synthesized phosphates of A x Zr 2.25-0.25x (PO 4 ) 3 type two series where A-Na (x = 0.5; 1.0; 2.0; 3.0; 4.0; 5.0) and K (x = 1.0; 3.0; 5.0). One calculated for them a and c parameters of the elementary cells and α a and α c linear expansion temperature coefficients. Anisotropy of thermal expansion the maximum one for AZr 2 (PO 4 ) 3 and Na 5 Zr(PO 4 ) 3 phosphates was determined. K 5 Zr(PO 4 ) 3 compound was characterized by the minimum thermal expansion at the near-zero anisotropy of Na 5 Zr(PO 4 ) 3 [ru

  4. Detailed investigation of Na2.24FePO4CO3 as a cathode material for Na-ion batteries

    Science.gov (United States)

    Huang, Weifeng; Zhou, Jing; Li, Biao; Ma, Jin; Tao, Shi; Xia, Dingguo; Chu, Wangsheng; Wu, Ziyu

    2014-01-01

    Na-ion batteries are gaining an increased recognition as the next generation low cost energy storage devices. Here, we present a characterization of Na3FePO4CO3 nanoplates as a novel cathode material for sodium ion batteries. First-principles calculations reveal that there are two paths for Na ion migration along b and c axis. In-situ and ex-situ Fe K-edge X-ray absorption near edge structure (XANES) point out that in Na3FePO4CO3 both Fe2+/Fe3+ and Fe3+/Fe4+ redox couples are electrochemically active, suggesting also the existence of a two-electron intercalation reaction. Ex-situ X-ray powder diffraction data demonstrates that the crystalline structure of Na3FePO4CO3 remains stable during the charging/discharging process within the range 2.0–4.55 V. PMID:24595232

  5. Synthesis and piezoelectric properties of (1 - x)Bi0.5(Na0.8K0.2)0.5TiO3-xSr2ZrTiO6 ceramics

    Science.gov (United States)

    Onishi, Ryo; Ogawa, Hirotaka; Iida, Daiki; Kan, Akinori

    2017-10-01

    The effects of Sr2ZrTiO6 (SZT) addition on the piezoelectric properties of (1 - x)Bi0.5(Na0.8K0.2)0.5TiO3 (BNKT)-xSZT ceramics were characterized in this study. The X-ray powder diffraction (XRPD) profiles and Raman spectra of the ceramics in the composition range of 0-0.02 implies the presence of morphotropic phase boundary (MPB) which consists of the rhombohedral and tetragonal phases. Moreover, the temperature dependence of dielectric loss indicated a presence of the ferroelectric-relaxor transition temperature (T F-R) of around 75 °C for x = 0.005 and the temperature dependence shifted to a lower temperature at x = 0.01. The temperature dependence of the P-E hysteresis loop of the ceramics at the compositions of x = 0.005-0.02 showed pinched hysteresis loops above T F-R. Regarding the piezoelectric constant (d 33), it was increased by SZT addition in the MPB region (x = 0-0.01) and the highest d 33 of 202 pC/N was obtained at the composition of x = 0.0025. The S-E unipolar loop was also evaluated, the strain of the ceramic increased up to x = 0.02; and the highest d33* = 436 pm/V was obtained at the composition of x = 0.02.

  6. Influência da estrutura do solo na distribuição e na morfologia do sistema radicular do milho sob três métodos de preparo

    Directory of Open Access Journals (Sweden)

    W. M. P. Mello Ivo

    1999-03-01

    Full Text Available O estudo da distribuição de raízes no solo é um método adequado para se detectarem as condições adversas ou não ao seu desenvolvimento, bem como para avaliar o efeito das alterações introduzidas por sistemas de preparo do solo. Sendo assim, o objetivo deste trabalho foi avaliar o efeito de métodos de preparo sobre determinadas características do solo e, por conseguinte, sobre o desenvolvimento do sistema radicular do milho. Para tal, foi utilizado um experimento de campo, instalado em um solo Podzólico Vermelho-Escuro com cinco anos de utilização por preparo convencional, reduzido e semeadura direta, na sucessão aveia + trevo/milho. Para observar as modificações estruturais do solo, usou-se o método do perfil cultural adaptado, acompanhado por determinações de densidade do solo, porosidade total, macro e microporosidade e resistência ao penetrômetro. Os métodos da parede do perfil e do monolito (prancha com pregos foram utilizados para determinar a distribuição e morfologia das raízes. Nos mapas estruturais descritos, observou-se que os modos de organização provocados pelos tratamentos explicaram parcialmente a presença das raízes no perfil. As plantas submetidas à semeadura direta, quando comparadas às do preparo convencional, tiveram o crescimento inicial das raízes diferindo do padrão diagonal normal e, ao final do ciclo, apresentaram raízes com maior raio médio nas profundidades de 10-15 e 25-35 cm e mostraram a densidade de comprimento (cm cm-3 maior na camada superficial (0-5 cm e menor na camada de 10-15 cm. Os sistemas de preparo não afetaram a massa seca de raízes e o rendimento dos grãos de milho.

  7. A comparative structural and electrochemical study of monoclinic Li3V2(PO4)3/C and rhombohedral Li2.5Na0.5V(2−2x/3)Nix(PO4)3/C

    International Nuclear Information System (INIS)

    Wang, Wenhui; Chen, Zhenyu; Zhang, Jiaolong; Dai, Changsong; Li, Jiajie; Ji, Dalong

    2013-01-01

    In order to synthesize pure derivative of rhombohedral Li 3 V 2 (PO 4 ) 3 (LVP), lithium-ion batteries materials Li 2.5 Na 0.5 V (2−2x/3) Ni x (PO 4 ) 3 /C (x = 0.03, 0.06, 0.09) and its control, monoclinic Li 3 V 2 (PO 4 ) 3 /C (LVP/C), were prepared by sol–gel method. The samples were investigated by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) spectroscopy, scanning electron microscopy (SEM), Raman spectroscopy, and electrochemical methods. The XRD patterns of Li 2.5 Na 0.5 V (2−2x/3) Ni x (PO 4 ) 3 /C are in good agreement with that of rhombohedral LVP, which indicates that the Na + –Ni 2+ composite doping can change the structure of monoclinic LVP. All the composite doping samples displayed a single flat plateau at 3.7 V in the charge/discharge voltage profile, which is caused by transformation of multi-phase mechanism to single-phase mechanism. For Li 2.5 Na 0.5 V 1.98 Ni 0.03 (PO 4 ) 3 /C, a specific discharge capacity of 108 mAh g −1 was achieved at a 0.5 C charge rate and a 1 C discharge rate, and a 99.0% retention rate of the initial capacity was obtained after 50 cycles

  8. X-ray diagnostic in gas discharge

    International Nuclear Information System (INIS)

    Chen Suhe; Wang Dalun; Cui Gaoxian; Wang Mei; Fu Yibei; Zhang Xinwei; Zhang Wushou

    1995-01-01

    X rays were observed when the anomalous phenomenon in the metal loaded with deuterium studied by the gas-discharge method. Therefore the X-ray energy spectra were measured by the absorption method, the specific X-ray approach and the NaI scintillation counter, while X-ray intensity was estimated by using 7 Li thermoluminescent foils. The X-ray average energy measured by the absorption method is 27.6 +- 2.1 keV, which is fitted within the error extent to 26.0 +-2.4 keV monoenergetic X rays measured by the NaI scintillation counter

  9. Major and minor elements and traces in igneous rocks from crystalline basement of Parana by X-ray fluorescence; Elementos maiores, menores e tracos, em rochas igneas do escudo cristalino paranaense por fluorescencia de raios-X

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Ademar O.; Pecequilo, Brigitte R.S.; Scapin, Marcos A.; Salvador, Vera L.R., E-mail: aoferreira@ipen.br, E-mail: brigitte@ipen.br, E-mail: mascapin@ipen.br, E-mail: vsalvado@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    Major and minor components of 30 acid and basic igneous rocks (granites, syenites, riolites and a basalt) of the Parana state crystalline basement were determined by X-ray fluorescence spectrometry (WDXRF), in order to evaluate the similarity in terms of the compositional content. The corrections of interelements effects (absorption/intensification) were performed by means of the fundamental parameters (FP) method. The methodology was validated using a certificated reference material. The main oxides found associated with the quantified elements are SiO{sub 2}, Al{sub 2}O{sub 3}, Na{sub 2}O, K{sub 2}O, Fe{sub 2}O{sub 3}, CaO, MgO, TiO{sub 2}, P{sub 2}O{sub 5}, MnO, SO{sub 3}, NiO, ZnO, Rb{sub 2}O. Through statistical analysis, the studied samples were organized in 3 groups of similar compositions: syenites, light granites and basalt and dark granites. The results show that the WDXRF technique is a robust tool that enables distinction even between similar geological samples. (author)

  10. Um estudo do circuito elétrico atmosférico global

    OpenAIRE

    Turquetti, Gabriela Nunes; Ferreira, Ivan Soares

    2016-01-01

    O Circuito Elétrico Global é um modelo eletrodinâmico que tenta relacionar os mecanismos de geração de corrente na baixa atmosfera, na ionosfera e na magnetosfera. Com este modelo é possível explicar, por exemplo, os eventos atmosféricos transientes que ocorrem entre o topo da nuvem e a ionosfera logo depois de uma descarga elétrica causada pelos raios durante uma tempestade. O modelo de circuito proposto é baseado em um circuito RC, alimentado por fontes DC e AC, onde os elementos que repres...

  11. Comportamento de 16 porta-enxertos para o tangor Murcott na região de Itirapina-SP Behavior of sixteen rootstocks for Murcott in Itirapina, SP, Brazil

    Directory of Open Access Journals (Sweden)

    José Orlando de Figueiredo

    2006-04-01

    Full Text Available Foi monitorado o comportamento de 16 porta-enxertos para o tangor Murcott [Citrus reticulata Blanco x C. sinensis (L. Osbeck], do clone nucelar J, em experimento instalado em 1990, na Fazenda Raio de Sol, Itirapina-SP. Os porta-enxertos foram: tangelo 'Orlando' (C. reticulata Blanco x C. paradisi Macf., laranja 'Caipira DAC' [C. sinensis (L. Osbeck], limão 'Cravo'(C. limonia Osbeck, os trifoliatas 'Kryder 8-5'e 'EEL'[Poncirus trifoliata (L. Raf.] e as tangerinas 'Cleópatra' (C. reshni hort. ex. Tanaka, 'Sunki' [C. sunki (Hayata hort. ex. Tanaka], 'Batangas', 'Oneco', 'Swatow', 'Szinkon', 'Satsuma', 'Cravo', 'Dancy', 'Suen Kat' e 'Pook Ling Ming' (C. reticulata Blanco. As produções foram avaliadas de 1996 a 2003 e as maiores médias foram proporcionadas pelas plantas enxertadas nas tangerinas 'Cleópatra', 'Suen Kat', 'Pook Ling Ming' e 'Sunki' (>40 kg planta-1. Dentre os porta-enxetos que induziram as mais baixas produções, estão os dois trifoliatas, a 'Caipira DAC' e a tangerina 'Cravo' (Sixteen rootstocks were compared in a trial started in 1990, for Murcott tangor, nucellar clone "J", in Itirapina, Brazil. The rootstocks tested were Orlando tangelo (Citrus reticulata Blanco x C. paradisi Macf., sweet orange [C. sinensis (L. Osbeck] cv. Caipira DAC, Rangpur lime (C. limonia Osbeck, Poncirus trifoliata (L. Raf. cv. Kryder 8-5, P. trifoliata (L. Raf. cv. EEL and the mandarins Cleopatra (C. reshni hort. ex. Tanaka, Sunki [C. sunki (Hayata hort. ex. Tanaka] and Batangas, Oneco, Swatow, Szinkon, Satsuma, Cravo, Dancy, Suen Kat and Pook Ling Ming (C. reticulata Blanco. Fruit yield was measured per plant, in a period of seven years (1996-2003. The best yielding rootstocks were Cleopatra, Suen Kat, Pook Ling Ming and Sunki mandarins (> 40 kg tree-1. The two Trifoliate, sweet orange cv. Caipira DAC and Cravo mandarin presented the lowest yields (< 25 kg tree-1. No significant variation was observed for fruit quality characteristics of trees on

  12. FT-IR and X-ray spectroscopic investigations of Na-diclofenac-cyclodextrins interactions

    Science.gov (United States)

    Bratu, I.; Astilean, S.; Ionesc, Corina; Indrea, E.; Huvenne, J. P.; Legrand, P.

    1998-01-01

    The association of DCF-Na (the salt of the 2-[(2,6-dichlorophenyl)amino]-phenyl-acetic acid) with β-CD (cyclodextrin) in some therapeutic formulas can contribute to the optimisation of the physico-chemical and pharmaceutical properties of the parent drug. The understanding of the interaction between DCF with β-CD represents the objective of this study. FT-IR spectroscopy is one of the methods which clarify the nature of these interactions in complexes of such type. Therefore the changes in FT-IR spectra of binary dispersed systems DCF/ β-CD in physical mixture and coprecipitate from methanol (molar ratios: 1/1, 1/2, 2/3, 3/4, 7/4) were analysed. The analysis of the broadening of the X-ray powder diffraction line has been applied to investigate the average effective crystallite size, the mean square of the microstrain caused by distortions within β-CD crystallite and the fault probability in the binary dispersed DCF/ β-CD coprecipitate system.

  13. Monitoring of garbage with a 5x5NaI (Tl) detector

    International Nuclear Information System (INIS)

    Cortes P, A.; Becerril V, A.; Angeles C, A.

    1991-12-01

    So far in that is carried out the first reload of nuclear fuel in the LVC, the monitoring of garbage has been carried out using monitors trade mark Eberline model RM 14. The procedure consists in manually monitoring each object and to separate of the considered 'clean' garbage the objects considered as contaminated, which register greater or equal counts to 100 cpm. This way to process was adequate under normal operation conditions, but not in the operation rhythm that implies a bigger maintenance since the time required for monitoring from 5 to 10 kg. of garbage is of the order of 0.5 hours and the production rhythm of this it ends up being a lot but high. Due to this necessity it was thought about the problem of looking by a more efficient monitoring method. In this work a method that uses a detector of NaI (Tl) of 5 x 5 inches is discussed. (Author)

  14. Dissolution of targets for the production of Mo-99: Part 1. Influence of NaOH concentration and the addition of NaNO3 and NaNO2 on the dissolution time

    International Nuclear Information System (INIS)

    Camilo, Ruth L.; Araujo, Izilda da C.; Mindrisz, Ana C.; Forbicini, Christina A.L.G. de O.

    2011-01-01

    Faced with global crisis in the production of radioisotope 99 Mo, which product of decay, 99 mTc, is the tracer element most often used in nuclear medicine and accounts for about 80% of all diagnostic procedures in vivo, since September 2008 Brazil is developing the project called Brazilian Multipurpose Reactor (RMB). Within the Brazilian Nuclear Program (PNB) the construction of the RMB, is seen as a long term solution to meet all domestic demand relative to the supply of radioisotopes and radiopharmaceuticals. In the process to be studied to obtain 99 Mo from irradiated UA1 x -A1 LEU targets employing alkaline dissolution, processing time should be minimized, considering the short half life of 99 Mo and 99 mTc, about 66 h and 6 h, respectively. That makes dissolution time a significant factor in the development of the process. This paper presents the results of alkaline dissolution of scraps of Al, used to simulate the dissolution process of UA1 x -A1 targets. Al corresponds to about 79% of the total weight of the UA1 x -A1 target. The effect of NaOH concentration on dissolution time for the interval of 1 to 3.5 mol.L-1 was studied, keeping the molar ratio in 1Al:2.16NaOH and the initial temperature of 88 degree C. The influence of reagent composition over dissolution time was studied using three different solutions: a) 3 mol.L -1 NaOH, b) 3 mol.L -1 NaOH/NaNO 3 and c) 3 mol.L -1 NaOH/NaNO 2 , keeping the same molar ratio and temperature. The results showed that the dissolution time decreases with increasing NaOH concentration and the addition of NaNO 3 or NaNO 2 in the NaOH solution reduces both dissolution time and volume of gases released. (author)

  15. Nanocomposites of polypropylene and organophilic montmorillonite clay: X-ray diffraction, infrared spectroscopy with Fourier transform and water permeation;Nanocomposito de prolipropileno e argila montmorilonita organifilica: difracao de raios-X, espectroscopia na regiao do infravermelho e permeacao ao vapor de agua

    Energy Technology Data Exchange (ETDEWEB)

    Morelli, Fernanda C; Ruvolo Filho, Adhemar, E-mail: fer_morelli@yahoo.com.b, E-mail: adhemar@power.ufscar.b [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil)

    2009-07-01

    In this work were prepared nanocomposites of polypropylene and organophilic montmorillonite Cloisite 20A with concentrations of 1.5%, 2.5%, 5.0% and 7.5% clay and graft polypropylene with maleic anhydride as compatibilizer. The mixture was made in the melt state using a twin screw extruder. The materials were characterized by x-ray diffraction, infrared spectroscopy with Fourier transform and analysis of water vapor permeation. The results of x-ray diffraction and infrared spectroscopy indicates the formation of nanocomposites with structures probably exfoliate and / or intercalated for concentrations of 1.5% and 2.5% clay, and provided a marked decrease in the water permeability, corroborating with other analysis. (author)

  16. Syntheses, and crystal and electronic structures of the new Zintl phases Na2ACdSb2 and K2ACdSb2 (A=Ca, Sr, Ba, Eu, Yb): Structural relationship with Yb2CdSb2 and the solid solutions Sr2-xAxCdSb2, Ba2-xAxCdSb2 and Eu2-xYbxCdSb2

    International Nuclear Information System (INIS)

    Saparov, Bayrammurad; Saito, Maia; Bobev, Svilen

    2011-01-01

    Presented are the details of the syntheses, crystal and electronic structures of a new family of Zintl phases Na 2 ACdSb 2 and K 2 ACdSb 2 (A=Ca, Sr, Ba, Eu, Yb), as well as the solid solutions Sr 2-x A x CdSb 2 , Ba 2-x A x CdSb 2 and Eu 2-x Yb x CdSb 2 . The structures of Na 2 ACdSb 2 and K 2 ACdSb 2 (A=Ca, Sr, Ba, Eu, Yb) were determined to be of a new type with the non-centrosymmetric space group Pmc2 1 (no. 26), Pearson symbol oP12, with lattice parameters a=4.684(1)-4.788(1) A; b=9.099(3)-9.117(2) A; c=7.837(1)-8.057(2) A for the Na 2 ACdSb 2 series, and a=4.6637(9)-5.0368(8) A; b=9.100(2)-9.8183(15) A; and c=7.7954(15)-8.4924(13) A for K 2 ACdSb 2 , respectively. The solid solutions Sr 2-x A x CdSb 2 , Ba 2-x A x CdSb 2 and Eu 2-x Yb x CdSb 2 (x∼1) are isostructural and isoelectronic to the recently reported Yb 2 CdSb 2 (space group Cmc2 1 (no. 36), Pearson symbol cP20). All discussed structures are based upon CdSb 2 4- polyanionic layers, similar to the ones observed in Yb 2 CdSb 2 , with various alkali- and/or alkaline-earth cations coordinated to them. Magnetic susceptibility and Seebeck coefficient measurements on selected Eu 2-x Yb x CdSb 2 samples, taken at low temperatures up to 300 K, are also reported. -- Graphical abstract: The quaternary Zintl phases Na 2 ACdSb 2 and K 2 ACdSb 2 (A=Ca, Sr, Ba, Eu, Yb) with novel layered structures have been synthesized for the first time and structurally characterized by single-crystal X-ray diffraction. Reported as well are the results from crystallographic and property studies of the closely related solid solutions Sr 2-x A x CdSb 2 , Ba 2-x A x CdSb 2 (x∼1), and Eu 2-x Yb x CdSb 2 (1 2 ACdSb 2 and K 2 ACdSb 2 (A=Ca, Sr, Ba, Eu, Yb) are new quaternary Zintl phases. → Sr 2-x A x CdSb 2 , Ba 2-x A x CdSb 2 (x∼1), and Eu 2-x Yb x CdSb 2 (1 4 tetrahedra. → Eu 2-x Yb x CdSb 2 (1< x<2) exhibit high Seebeck coefficient (217 μV/K at RT).

  17. Seasonal variation of soluble carbohydrates and starch in Echinolaena inflexa, a native grass species from the Brazilian savanna, and in the invasive grass Melinis minutiflora Variações sazonais de carboidratos solúveis e amido em Echinolaena inflexa, uma espécie nativa do cerrado, e na gramínea invasora Melinis minutiflora

    Directory of Open Access Journals (Sweden)

    A. Souza

    2010-05-01

    , a 5 e 130 m da borda da Reserva Biológica e Estação Experimental de Mogi-Guaçu, uma área restrita de cerrado (SP, Brasil. Os resultados mostraram que os carboidratos solúveis e o conteúdo de amido da parte aérea de ambas as espécies variaram de acordo com a época do ano, enquanto que nos órgãos subterrâneos as variações foram observadas principalmente em relação aos transectos. Diferenças marcantes no padrão de distribuição de biomassa aérea das duas espécies em relação à localização na reserva também foram observadas, com dois picos de produção da espécie invasora (em julho e janeiro na borda da reserva. As diferenças observadas no acúmulo de carboidratos, partição e composição dos açúcares em relação à época do ano e localização na reserva foram mais relacionadas ao ciclo anual de crescimento de ambas as espécies e possivelmente a respostas fisiológicas específicas de M. minutiflora a ambientes perturbados na borda da reserva.

  18. Study of the Na-C-O and Na-H-O ternary systems in the sodium rich corner

    International Nuclear Information System (INIS)

    Maupre, J.-P.

    1978-02-01

    The purpose of this study is to provide a contribution to the understanding of the sodium - carbon - oxygen and sodium - hydrogen - oxygen ternary systems in the sodium rich corner. In order to do this the Na-NaH-Na 2 O-NaOH phase diagram was completed and the Na-Na 2 O-Na 2 CO 3 -C phase diagram was outlined. This work is made up of two parts. The first is devoted to a critical literature survey essential to establish correct phase diagrams. The second is an experimental study followed by a discussion collating our finding to the literary data. The basic experimental technique used is differential thermal analysis (DTA) but it has been completed by quenching, X-ray and chemical analysis methods. The proposed phase diagrams imply that Na-NaH-Na 2 O-NaOH and Na-Na 2 O-Na 2 CO 3 -C systems are reciprocal ternary systems. Temperatures of stable pairs reversal are respectively 410 and 690 0 C. The stable pairs are Na-NaOH and Na-Na 2 CO 3 at elevated temperature, Na 2 O-NaH and Na 2 O-C at low temperature [fr

  19. CARACTERÍSTICAS QUÍMICO-MINERALÓGICAS DE FONTES DE PIGMENTOS MINERAIS EM DEPÓSITOS NATURAIS DO ENTORNO DO SÍTIO ARQUEOLÓGICO PEDRA DO CANTAGALO I, EM PIRIPIRI, PIAUÍ, BRASIL (Chemical-Mineralogical Features of Mineral Pigments Sources in Natural Deposits Surrounding the Pedra do Cantagalo I Archaeological Site, in Piripiri, Piauí, Brazil

    Directory of Open Access Journals (Sweden)

    Heralda Kelis Sousa Bezerra da Silva

    2017-12-01

    Full Text Available Pigmentos minerais de jazidas existentes no entorno do sítio arqueológico Pedra do Cantagalo I, localizado em Piripiri, Piauí, Brasil, foram investigados por fluorescência de raios X por dispersão de energia (EDXRF, difratometria de raios X (DRX pelo método do pó, análise elementar CHN e espectroscopia Mössbauer do 57Fe. O teor de ferro, determinado por EDXRF, expresso na forma de Fe2O3, é de ~15 massa% no pigmento cinza, ~12 massa% no amarelo e de ~19 a ~21 massa% no vermelho. Espectros Mössbauer mostram sextetos atribuíveis à hematita e dupletos de Fe3+ para os pigmentos cinza e vermelho. Alguns campos magnéticos hiperfinos relativamente baixos para a hematita sugerem que frações desse óxido de ferro têm pequenos tamanhos de partículas. O espectro Mössbauer para o pigmento amarelo mostrou apenas dois dupletos de Fe3+, atribuíveis a espécies superparamagnéticas, muito provavelmente incluindo goethita, de pequenos tamanhos de partículas, ou a ferro paramagnético na estrutura cristalina de aluminossilicatos. Os padrões de DRX mostram reflexões características de quartzo, muscovita, caulinita, ilita, albita, hematita, rutilo e anatásio. ENGLISH: Mineral pigments from deposits surrounding the Pedra do Cantagalo I archaeological site, in the municipality of Piripiri, Piauí-Brazil, were investigated by energy dispersive X-ray fluorescence (EDXRF, powder X-ray diffractometry (XRD, CHN elemental analysis and 57Fe Mössbauer spectroscopy. The iron contents, as determined by EDXRF, expressed as Fe2O3, is ~15 mass% for the gray, ~12 mass% for the yellow and from ~19 to ~21 mass% for the red pigment. Mössbauer spectra show sextets attributed to hematite and Fe3+ doublets, for the gray and red pigments. Even appearing as relatively low values, the hyperfine magnetic fields are assignable to hematite occurring in fractions of small particle sizes. The Mössbauer spectrum for the yellow pigment showed only two Fe3+ doublets

  20. Characterization and antibacterial activity of silver exchanged regenerated NaY zeolite from surfactant-modified NaY zeolite.

    Science.gov (United States)

    Salim, Mashitah Mad; Malek, Nik Ahmad Nizam Nik

    2016-02-01

    The antibacterial activity of regenerated NaY zeolite (thermal treatment from cetyltrimethyl ammonium bromide (CTAB)-modified NaY zeolite and pretreatment with Na ions) loaded with silver ions were examined using the broth dilution minimum inhibitory concentration (MIC) method against Escherichia coli (E. coli ATCC 11229) and Staphylococcus aureus (S. aureus ATCC 6538). X-ray diffraction (XRD), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) and chemical elemental analyses were used to characterize the regenerated NaY and AgY zeolites. The XRD patterns indicated that the calcination and addition of silver ions on regenerated NaY zeolite did not affect the structure of the regenerated NaY zeolite as the characteristic peaks of the NaY zeolite were retained, and no new peaks were observed. The regenerated AgY zeolite showed good antibacterial activity against both bacteria strains in distilled water, and the antibacterial activity of the samples increased with increasing Ag loaded on the regenerated AgY zeolite; the regenerated AgY zeolite was more effective against E. coli than S. aureus. However, the antibacterial activity of the regenerated AgY was not effective in saline solution for both bacteria. The study showed that CTAB-modified NaY zeolite materials could be regenerated to NaY zeolite using thermal treatment (550°C, 5h) and this material has excellent performance as an antibacterial agent after silver ions loading. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. The effect of Na on Cu-K-In-Se thin film growth

    Science.gov (United States)

    Muzzillo, Christopher P.; Tong, Ho Ming; Anderson, Timothy J.

    2018-04-01

    Co-evaporation of Cu-KF-In-Se was performed on substrates with varied Na supply. Compositions of interest for photovoltaic absorbers were studied, with ratios of (K + Cu)/In ∼ 0.85 and K/(K + Cu) ∼ 0-0.57. Bare soda-lime glass (SLG) substrates had the highest Na supply as measured by secondary ion mass spectrometry, while SLG/Mo and SLG/SiO2/Mo substrates led to 3x and 3000x less Na in the growing film, respectively. Increased Na supply favored Cu1-xKxInSe2 (CKIS) alloy formation as proven by X-ray diffraction (XRD), while decreased Na supply favored the formation of CuInSe2 + KInSe2 mixed-phase films. Scanning electron microscopy and energy dispersive X-ray spectroscopy revealed the KInSe2 precipitates to be readily recognizable planar crystals. Extrinsic KF addition during film growth promoted diffusion of Na out from the various substrates and into the growing film, in agreement with previous reports. Time-resolved photoluminescence showed enhanced minority carrier lifetimes for films with moderate K compositions (0.04 interdependency can be used to engineer alkali metal bonding in Cu(In,Ga)(Se,S)2 absorbers to optimize both initial and long-term photovoltaic power generation.

  2. A review of the structure-property relationships in lead-free piezoelectric (1−x)Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}–(x)BaTiO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    McQuade, Ryan R.; Dolgos, Michelle R., E-mail: Michelle.Dolgos@oregonstate.edu

    2016-10-15

    Piezoelectric materials are increasingly being investigated for energy harvesting applications where (1−x)Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}–(x)BaTiO{sub 3} (NBT-BT) is an important lead-free piezoelectric material with potential to be used as an actuator in energy harvesting devices. Much effort has been put into modifying NBT-BT to tune the properties for specific applications, but there is currently no consensus regarding the structure-property relationships in this material, making targeted, rational design a major challenge. In this review, we will summarize the current body of knowledge of NBT-BT and discuss contradicting studies, unresolved problems, and future directions in the field. - Graphical abstract: This review of (1−x)Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}–(x)BaTiO{sub 3} (NBT-BT) summarizes the large body of literature regarding the structure-property relationships of this complex material. We highlight structural studies of the average and local structures of both unpoled and poled samples of NBT-BT at its morphotropic phase boundary and discuss them in context of the observed piezoelectric properties. - Highlights: • Local and average structure of NBT-BT at morphotropic phase boundary is reviewed. • Average structure of poled and unpoled samples of NBT-BT is discussed. • Structure-property relationships in NBT-BT and future directions are summarized.

  3. Substitution behavior of x(Na0.5K0.5)NbO3-(1 − x)BaTiO3 ceramics for multilayer ceramic capacitors by a near edge x-ray absorption fine structure analysis

    International Nuclear Information System (INIS)

    Ha, Jooyeon; Ryu, Jiseung; Lee, Heesoo

    2014-01-01

    The doping effect of (Na 0.5 K 0.5 )NbO 3 (NKN) as alternatives for rare-earth elements on the electrical properties of BaTiO 3 has been investigated, in terms of their substitution behavior. The dielectric constant of a specimen with x = 0.05 was about 79% higher than that of pure BaTiO 3 , and the temperature coefficient of capacitance was satisfied by the X7R specification. The specimen with x = 0.05 showed the lowest tetragonality among the four compositions and had a fine grain size of 5+ ion for Ti-sites. Therefore, the simultaneous substitution of Na + /K + and Nb 5+ ions into BaTiO 3 can improve dielectric properties, based on the charge-transfer process.

  4. Compósitos de borracha natural com polianilina Composites of natural rubber with polyaniline

    Directory of Open Access Journals (Sweden)

    Patrini D. Galiani

    2007-06-01

    Full Text Available Compósitos de borracha natural (Hevea brasiliensis-BN/polianilina - PANI, com diferentes composições foram obtidos através da polimerização por emulsão do monômero anilina na presença da BN e do ácido dodecilbenzeno sulfônico (DBSA. Filmes finos e homogêneos foram obtidos por prensagem a quente. Os compósitos foram caracterizados por condutividade elétrica, FTIR, UV-vis-NIR, DSC e difração de raios X. Compósito com condutividade elétrica cerca de 14 ordens de grandeza maior que a BN foi obtido. Este alto valor de condutividade é atribuído à formação da PANI no estado dopado no compósito, que foi verificado através das técnicas de UV-vis-NIR e FTIR. Os resultados obtidos com a técnica de DSC e difratometria de raios X indicaram que os polímeros são imiscíveis e que a presença da borracha não altera significantemente a fase cristalina da PANI-DBSA no compósito.In this work composites with different compositions were obtained from natural rubber (Hevea brasiliensis (NR and polyaniline (PANI using the emulsion polymerization of aniline in the presence of NR and dodecylbenzenesulfonic acid (DBSA. The samples in film form were obtained by pressing the precipitate at 100 °C for 5 minutes. The composites were characterized by electrical conductivity, Fourier-transform infrared spectroscopy (FTIR, UV-vis-NIR spectroscopy, differential scanning calorimetry (DSC and X ray diffraction. Composites with electrical conductivity about 14 orders of magnitude higher than NR were obtained. The UV-vis-NIR and FTIR spectra showed that PANI-DBSA was formed in the composites, thus making it responsible for their high conductivity. The DSC thermograms indicated that the two polymers are immiscible and X ray diffraction evidenced that NB does not considerably affect PANI-DBSA crystalline phase in the composite.

  5. Ultrasonic study of the charge mismatch effect in charge-ordered (Nd{sub 0.75}Na{sub 0.25}){sub x}(Nd{sub 0.5}Ca{sub 0.5}){sub 1-x}MnO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Jiang Liang; Su Jinrui; Kong Hui; Liu Yi; Zheng Shiyuan; Zhu Changfei [Laboratory of Advanced Functional Materials and Devices, Department of Materials Science and Engineering, University of Science and Technology of China, Hefei 230026 (China)

    2006-09-20

    The resistivity, magnetization and ultrasonic properties of charge-ordered polycrystalline (Nd{sub 0.75}Na{sub 0.25}){sub x}(Nd{sub 0.5}Ca{sub 0.5}){sub 1-x}MnO{sub 3} have been investigated from 50 to 300 K. A considerable velocity softening accompanied by an attenuation peak was observed around the charge-ordering transition temperature (T{sub CO}) upon cooling. The simultaneous occurrence of the charge ordering (CO) and the ultrasonic anomaly implies strong electron-phonon coupling, which originates from the cooperative Jahn-Teller effect. At very low temperature, another broad attenuation peak was observed, which is attributed to the phase separation (PS) and gives a direct evidence of spin-phonon coupling in the compound. With increasing x, T{sub CO} shifts to lower temperature, the magnetization of the system is strengthened and the PS is enhanced. The temperature dependence of the longitudinal modulus shows that the Jahn-Teller coupling energy E{sub JT} decreases with increasing Na content. The analysis suggests that the charge mismatch effect may be the main reason for the suppression of the CO and enhancement of the PS.

  6. POSLOVNI POTENCIAL DRUŽBENEGA OMREŽJA INSTAGRAM NA PRIMERU PODJETJA X

    OpenAIRE

    Mujkanović, Maja

    2016-01-01

    V svetu sodobne tehnologije je že skoraj nujno, da podjetja za komuniciranje uporabljajo digitalne medije, saj jim omogočajo lažje približanje ciljni skupini in komuniciranje s svojimi odjemalci. Tako lahko podjetja izbirajo med različnimi družbenimi omrežji, sami pa morajo presoditi, kateri način komuniciranja je najbolj primeren glede na segment njihovih strank. Enega od načinov komuniciranja s strankami omogoča tudi družbeno omrežje Instagram, ki ga bomo kot poslovni potencial v nadalj...

  7. Dissolution of targets for the production of Mo-99: Part 1. Influence of NaOH concentration and the addition of NaNO{sub 3} and NaNO{sub 2} on the dissolution time

    Energy Technology Data Exchange (ETDEWEB)

    Camilo, Ruth L.; Araujo, Izilda da C.; Mindrisz, Ana C.; Forbicini, Christina A.L.G. de O., E-mail: rcamilo@ipen.br, E-mail: icaraujo@ipen.br, E-mail: acmindri@ipen.br, E-mail: cforbici@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN/SP), Sao Paulo, SP (Brazil)

    2011-07-01

    Faced with global crisis in the production of radioisotope {sup 99}Mo, which product of decay, {sup 99}mTc, is the tracer element most often used in nuclear medicine and accounts for about 80% of all diagnostic procedures in vivo, since September 2008 Brazil is developing the project called Brazilian Multipurpose Reactor (RMB). Within the Brazilian Nuclear Program (PNB) the construction of the RMB, is seen as a long term solution to meet all domestic demand relative to the supply of radioisotopes and radiopharmaceuticals. In the process to be studied to obtain {sup 99}Mo from irradiated UA1{sub x}-A1 LEU targets employing alkaline dissolution, processing time should be minimized, considering the short half life of {sup 99}Mo and {sup 99}mTc, about 66 h and 6 h, respectively. That makes dissolution time a significant factor in the development of the process. This paper presents the results of alkaline dissolution of scraps of Al, used to simulate the dissolution process of UA1{sub x}-A1 targets. Al corresponds to about 79% of the total weight of the UA1{sub x}-A1 target. The effect of NaOH concentration on dissolution time for the interval of 1 to 3.5 mol.L-1 was studied, keeping the molar ratio in 1Al:2.16NaOH and the initial temperature of 88 degree C. The influence of reagent composition over dissolution time was studied using three different solutions: a) 3 mol.L{sup -1} NaOH, b) 3 mol.L{sup -1} NaOH/NaNO{sub 3} and c) 3 mol.L{sup -1} NaOH/NaNO{sub 2}, keeping the same molar ratio and temperature. The results showed that the dissolution time decreases with increasing NaOH concentration and the addition of NaNO{sub 3} or NaNO{sub 2} in the NaOH solution reduces both dissolution time and volume of gases released. (author)

  8. Efficiency enhancement using a Zn1- x Ge x -O thin film as an n-type window layer in Cu2O-based heterojunction solar cells

    Science.gov (United States)

    Minami, Tadatsugu; Nishi, Yuki; Miyata, Toshihiro

    2016-05-01

    Efficiency enhancement was achieved in Cu2O-based heterojunction solar cells fabricated with a zinc-germanium-oxide (Zn1- x Ge x -O) thin film as the n-type window layer and a p-type Na-doped Cu2O (Cu2O:Na) sheet prepared by thermally oxidizing Cu sheets. The Ge content (x) dependence of the obtained photovoltaic properties of the heterojunction solar cells is mainly explained by the conduction band discontinuity that results from the electron affinity difference between Zn1- x Ge x -O and Cu2O:Na. The optimal value of x in Zn1- x Ge x -O thin films prepared by pulsed laser deposition was observed to be 0.62. An efficiency of 8.1% was obtained in a MgF2/Al-doped ZnO/Zn0.38Ge0.62-O/Cu2O:Na heterojunction solar cell.

  9. On the Stability of NaO2 in Na-O2 Batteries.

    Science.gov (United States)

    Liu, Chenjuan; Carboni, Marco; Brant, William R; Pan, Ruijun; Hedman, Jonas; Zhu, Jiefang; Gustafsson, Torbjörn; Younesi, Reza

    2018-04-25

    Na-O 2 batteries are regarded as promising candidates for energy storage. They have higher energy efficiency, rate capability, and chemical reversibility than Li-O 2 batteries; in addition, sodium is cheaper and more abundant compared to lithium. However, inconsistent observations and instability of discharge products have inhibited the understanding of the working mechanism of this technology. In this work, we have investigated a number of factors that influence the stability of the discharge products. By means of in operando powder X-ray diffraction study, the influence of oxygen, sodium anode, salt, solvent, and carbon cathode were investigated. The Na metal anode and an ether-based solvent are the main factors that lead to the instability and decomposition of NaO 2 in the cell environment. This fundamental insight brings new information on the working mechanism of Na-O 2 batteries.

  10. Adaptive strain prompting a pseudo-morphotropic phase boundary in ferroelectric (1-x ) Na0.5Bi0.5TiO3-x BaTiO3

    Science.gov (United States)

    Datta, K.; Neder, R. B.; Richter, A.; Göbbels, M.; Neuefeind, J. C.; Mihailova, B.

    2018-05-01

    The understanding of the atomistic origin of the morphotropic phase boundary (MPB) occurring in composition-temperature phase diagrams of ferroelectric solid solutions is a key topic in material science because materials often exhibit anomalous properties at the MPB. Here we reveal mesoscopic-scale structural correlations for a leading Pb-free ferroelectric system, (1 -x ) Na0.5Bi0.5TiO3-x BaTiO3 (NBT-x BT ), by examining atomic pair distribution functions and Raman scattering data at ambient conditions. We demonstrate that the amplification of the piezoelectric properties of NBT-x BT at the MPB are predominantly driven by an easy switchability resulting from a progressive decoupling between strain and polarization as the Ba content increases from zero to the critical MPB composition. It was observed that as Ba content increases towards MPB, competing local correlations, such as A-site chemical order, antiferrodistortive correlations of correlated BO6 tilts, and antipolar Bi shifts, are reduced, which in turn renders favorable conditions for easy switching of local dipoles under external fields. In addition, the evolving characteristics of the atomic dynamics as a function of composition suggest that the local potential functions of the cations are not completely flat at the MPB. Altogether, our results reveal atomistic mechanisms responsible for the observed elevated MPB properties in the case of NBT-x BT which imply that the so-called MPB of NBT-x BT should not be categorized as originally introduced for Pb-containing solid solutions.

  11. Mixed Alkali Effect in (40-x)K2O-xLi2O-10Na2O-50B2O3 Glasses - Physical and Optical Absorption Studies

    Science.gov (United States)

    Samee, M. A.; Ahmmad, Shaikh Kareem; Taqiullah, Sair. Md.; Edukondalu, A.; Bale, Shashidhar; Rahman, Syed

    So far only a handful of publications have been concerned with the study of the mixed alkali effect in borate glasses containing three types of alkali ions. In the present work, the mixed alkali effect (MAE) has been investigated in the glass system (40-x) K2O-x Li2O -10Na2O-50B2O3.(0≤x≤40 mol%) through density and modulated DSC studies. The density and glass transition temperature of the present glasses varies non-linearly exhibiting mixed alkali effect. We report the mixed alkali effect in the present glasses through optical properties. From the absorption edge studies, the various values of optical band gap (Eo) and Urbach energy (ΔE) have been evaluated. The values of Eo and ΔE show non-linear behavior with compositional parameter showing the mixed alkali effect. The band gap energy based average electronic polarizability of oxide ions αO2-(Eo), optical basicity A(Eo), and Yamashita-Kurosawa’s interaction parameter A(Eo) have been examined to check the correlations among them and bonding character. Based on good correlation among electronic polarizability of oxide ions, optical basicity and interaction parameter, the present K2O- Li2O-Na2O-B2O3 glasses are classified as normal ionic (basic) oxides.

  12. Structural and optical properties of Na-doped ZnO films

    Science.gov (United States)

    Akcan, D.; Gungor, A.; Arda, L.

    2018-06-01

    Zn1-xNaxO (x = 0.0-0.05) solutions have been synthesized by the sol-gel technique using Zinc acetate dihydrate and Sodium acetate which were dissolved into solvent and chelating agent. Na-doped ZnO nanoparticles were obtained from solutions to find phase and crystal structure. Na-doped ZnO films have been deposited onto glass substrate by using sol-gel dip coating system. The effects of dopant concentration on the structure, morphology, and optical properties of Na-doped ZnO thin films deposited on glass substrate are investigated. Characterization of Zn1-xNaxO nanoparticles and thin films are examined using differential thermal analysis (DTA)/thermogravimetric analysis (TGA), Scanning electron microscope (SEM) and X-Ray diffractometer (XRD). Optical properties of Zn1-xNaxO thin films were obtained by using PG Instruments UV-Vis-NIR spectrophotometer in 190-1100 nm range. The structure, morphology, and optical properties of thin films are presented.

  13. First-principles calculations of the electronic structure and optical properties of K1−xNaxTaO3 (x=0, 0.25, 0.5, 0.75, 1)

    International Nuclear Information System (INIS)

    Zhao, Na; Wang, Yue-Hua; Wang, Qing-Xi; Hu, Wen-Jing

    2012-01-01

    The first-principles calculations are performed to investigate the cubic phase composite K 1−x Na x TaO 3 (x=0, 0.25, 0.5, 0.75, 1), by using density functional theory (DFT) with the full potential linearized augmented plane wave (FP-LAPW) method. The energy band structures, density of states (DOS), electron density and optical properties are obtained. The results show that Na ion plays an important role in K 1−x Na x TaO 3 . With the content of Na ion increasing, the changes of lattice parameters, energy gaps, bond lengths and optical properties of K 1−x Na x TaO 3 are regular. Moreover, the dependence of ferroelectric photocatalysis on both optical properties and internal electronic structure are analyzed in detail. It is proposed that the doped materials are promising photocatalytic materials. - Graphical abstract: The density of states (DOS) of K 1−x Na x TaO 3 (x=0.5). Highlights: ► The first-principles calculations are performed, by using DFT with FP-LAPW method. ► The changes of internal electronic structure and optical property of doped materials are regular. ► The dependence of ferroelectric photocatalysis on optical properties is analyzed. ► The dependence of ferroelectric photocatalysis on internal electronic structure is analyzed. ► The doped materials are promising photocatalytic materials.

  14. Characterization and antibacterial activity of silver exchanged regenerated NaY zeolite from surfactant-modified NaY zeolite

    Energy Technology Data Exchange (ETDEWEB)

    Salim, Mashitah Mad; Malek, Nik Ahmad Nizam Nik, E-mail: niknizam@fbb.utm.my

    2016-02-01

    The antibacterial activity of regenerated NaY zeolite (thermal treatment from cetyltrimethyl ammonium bromide (CTAB)-modified NaY zeolite and pretreatment with Na ions) loaded with silver ions were examined using the broth dilution minimum inhibitory concentration (MIC) method against Escherichia coli (E. coli ATCC 11229) and Staphylococcus aureus (S. aureus ATCC 6538). X-ray diffraction (XRD), attenuated total reflectance–Fourier transform infrared (ATR–FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) and chemical elemental analyses were used to characterize the regenerated NaY and AgY zeolites. The XRD patterns indicated that the calcination and addition of silver ions on regenerated NaY zeolite did not affect the structure of the regenerated NaY zeolite as the characteristic peaks of the NaY zeolite were retained, and no new peaks were observed. The regenerated AgY zeolite showed good antibacterial activity against both bacteria strains in distilled water, and the antibacterial activity of the samples increased with increasing Ag loaded on the regenerated AgY zeolite; the regenerated AgY zeolite was more effective against E. coli than S. aureus. However, the antibacterial activity of the regenerated AgY was not effective in saline solution for both bacteria. The study showed that CTAB-modified NaY zeolite materials could be regenerated to NaY zeolite using thermal treatment (550 °C, 5 h) and this material has excellent performance as an antibacterial agent after silver ions loading. - Highlights: • Thermal treatment was used to regenerate surfactant modified zeolite. • The regenerated NaY zeolite formed was added with different silver loadings. • Regenerated AgY zeolite was tested for antibacterial activity on E. coli and S. aureus. • The antibacterial activity increased with increased of the amount of silver loadings. • The zeolite structure did not change with thermal and modification

  15. Characterization and antibacterial activity of silver exchanged regenerated NaY zeolite from surfactant-modified NaY zeolite

    International Nuclear Information System (INIS)

    Salim, Mashitah Mad; Malek, Nik Ahmad Nizam Nik

    2016-01-01

    The antibacterial activity of regenerated NaY zeolite (thermal treatment from cetyltrimethyl ammonium bromide (CTAB)-modified NaY zeolite and pretreatment with Na ions) loaded with silver ions were examined using the broth dilution minimum inhibitory concentration (MIC) method against Escherichia coli (E. coli ATCC 11229) and Staphylococcus aureus (S. aureus ATCC 6538). X-ray diffraction (XRD), attenuated total reflectance–Fourier transform infrared (ATR–FTIR) spectroscopy, field emission scanning electron microscopy (FESEM), energy dispersive X-ray (EDX) and chemical elemental analyses were used to characterize the regenerated NaY and AgY zeolites. The XRD patterns indicated that the calcination and addition of silver ions on regenerated NaY zeolite did not affect the structure of the regenerated NaY zeolite as the characteristic peaks of the NaY zeolite were retained, and no new peaks were observed. The regenerated AgY zeolite showed good antibacterial activity against both bacteria strains in distilled water, and the antibacterial activity of the samples increased with increasing Ag loaded on the regenerated AgY zeolite; the regenerated AgY zeolite was more effective against E. coli than S. aureus. However, the antibacterial activity of the regenerated AgY was not effective in saline solution for both bacteria. The study showed that CTAB-modified NaY zeolite materials could be regenerated to NaY zeolite using thermal treatment (550 °C, 5 h) and this material has excellent performance as an antibacterial agent after silver ions loading. - Highlights: • Thermal treatment was used to regenerate surfactant modified zeolite. • The regenerated NaY zeolite formed was added with different silver loadings. • Regenerated AgY zeolite was tested for antibacterial activity on E. coli and S. aureus. • The antibacterial activity increased with increased of the amount of silver loadings. • The zeolite structure did not change with thermal and modification

  16. Corrosion study of API 5L x-series pipeline steels in 3.5% NaCl solution under varying conditions

    International Nuclear Information System (INIS)

    Shahid, M.; Qureshi, M.I.; Farooq, M.U.; Khan, M.I.

    2003-01-01

    Pipelines provide convenient and efficient means for mass transportation of variety of fluids, such as oil and gas, over varying distances. In the last two decades or so, pipeline designers focused mainly on the usage of larger sizes and higher operating pressures for achieving higher transportation efficiency. This has been accomplished through the provision of steels with progressive increase in yield strength coupled with good weldability and sufficient toughness to restrict crack propagation. In addition to higher strength and toughness, developing pipeline technologies have required improved resistance to corrosion, which has been tried with specific alloy additions and special control over non-metallic inclusions. Corrosion investigations were carried out on various grades of pipeline steels (API 5L X-46, X-52, X-56, X-60 and X- 70) under varying environmental conditions. This paper describes the results pertaining to corrosion behavior of the steels in 3.5% NaCl solutions in stagnant, turbulent and deaerated conditions. It was found that all grades corrode in this solution and their corrosion potentials and corrosion currents are in close vicinity of each other. Turbulent solutions, however, have shown an increase in corrosion rates whereas deaeration has revealed a relative decrease in aggressivity of the electrolyte. (author)

  17. Effects of dehydration and X-ray irradiation on the structure of MnNaY zeolite

    International Nuclear Information System (INIS)

    Pearce, J.R.; Mortier, W.J.; Uytterhoeven, J.B.; Lunsford, J.H.

    1979-01-01

    In hydrated MnNaY, the Mnsup(II) ion is present as a fully hydrated complex in the zeolite large cavities while Nasup(I) is located in site I' as an octahedral complex composed of three lattice oxide ions and three H 2 O molecules located in site II'. Upon dehydration, manganese is found in all of the sites I, I' and II. The exposure of this dehydrated sample to long periods of Cu X-radiation induces a significant redistribution of the exchangeable cations as well as increasing the amount of an oxygen species found at site II'. The presence of this oxygen necessitates the participation of lattice oxide ions in the formation of extra lattice complexes in the sodalite cage. (author)

  18. Solid-state synthesis in the system Na0.8NbyW1-yO3 with 0≤y≤0.4: A new phase, Na0.5NbO2.75, with perovskite-type structure

    International Nuclear Information System (INIS)

    Debnath, Tapas; Ruescher, Claus H.; Gesing, Thorsten M.; Koepke, Juergen; Hussain, Altaf

    2008-01-01

    Series of compounds in the system Na x Nb y W 1-y O 3 were prepared according to the appropriate molar ratio of Na 2 WO 4 , WO 3 , WO 2 and Nb 2 O 5 with x=0.80 and 0.0≤y≤0.4 at 600 deg. C in evacuated silica glass tubes. These compounds were investigated by X-ray powder diffraction, optical microscopy, microprobe analysis, Raman and optical microspectroscopy. A y-dependent separation into three distinct coloured crystallites with cubic perovskite-type structures is observed: (i) red-orange crystallites with composition Na x WO 3 with slightly decreasing x (i.e. 0.8-0.72) with increasing nominal y, (ii) bluish solid solution of composition Na x Nb y W 1-y O 3 and (iii) white crystallites of a new phase having defect perovskite-type structure with composition Na 0.5 NbO 2.75 . - Graphical abstract: Optical micrograph of a polished sample of nominal composition Na 0.8 Nb 0.4 W 0.6 O 3 showing a mixture of three different coloured crystals: red, light blue and white. The scale bar is 30 μm

  19. Experimental cross-sections of deuteron-induced reaction on Y-89 up to 20 MeV; comparison of Ti-nat(d,x)V-48 and Al-27(d,x)Na-24 monitor reactions

    Czech Academy of Sciences Publication Activity Database

    Lebeda, Ondřej; Štursa, Jan; Ráliš, Jan

    2015-01-01

    Roč. 360, OCT (2015), s. 118-128 ISSN 0168-583X R&D Projects: GA MŠk LM2011019 Institutional support: RVO:61389005 Keywords : deuteron-induced nuclear reactions * excitation functions * Na, Mg, Sc, V, Sr, Y and Zr radioisotopes * deuteron beam monitors * U-120M cyclotron Subject RIV: BG - Nuclear , Atomic and Molecular Physics, Colliders Impact factor: 1.389, year: 2015

  20. X-ray Studies of Regenerated Cellulose Fibers Wet Spun from Cotton Linter Pulp in NaOH/Thiourea Aqueous Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Chen,X.; Burger, C.; Fang, D.; Ruan, D.; Zhang, L.; Hsiao, B.; Chu, B.

    2006-01-01

    Regenerated cellulose fibers were fabricated by dissolution of cotton linter pulp in NaOH (9.5 wt%) and thiourea (4.5 wt%) aqueous solution followed by wet-spinning and multi-roller drawing. The multi-roller drawing process involved three stages: coagulation (I), coagulation (II) and post-treatment (III). The crystalline structure and morphology of regenerated cellulose fiber was investigated by synchrotron wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS) techniques. Results indicated that only the cellulose II crystal structure was found in regenerated cellulose fibers, proving that the cellulose crystals were completely transformed from cellulose I to II structure during spinning from NaOH/thiourea aqueous solution. The crystallinity, orientation and crystal size at each stage were determined from the WAXD analysis. Drawing of cellulose fibers in the coagulation (II) bath (H{sub 2}SO{sub 4}/H{sub 2}O) was found to generate higher orientation and crystallinity than drawing in the post-treatment (III). Although the post-treatment process also increased crystal orientation, it led to a decrease in crystallinity with notable reduction in the anisotropic fraction. Compared with commercial rayon fibers fabricated by the viscose process, the regenerated cellulose fibers exhibited higher crystallinity but lower crystal orientation. SAXS results revealed a clear scattering maximum along the meridian direction in all regenerated cellulose fibers, indicating the formation of lamellar structure during spinning.

  1. Catalytic oxidation of methanol on Pt/X (X = CaTP, NaTP electrodes in sulfuric acid solution

    Directory of Open Access Journals (Sweden)

    Said Benmokhtar

    2013-10-01

    Full Text Available In this paper, we report the synthesis and characterization of electrodes based on NASICON type phosphates. The study of the electrochemical oxidation of methanol at ambient temperature on electrodes based on NASICON type Ca0,5Ti2(PO43 (CaTP and Na5Ti(PO43 (NaTP compared to that of the platinum electrode model has been conducted by cyclic voltammetry in acidic medium. The results showed a significant increase of current density on the electro oxidation of methanol on the material developed based NASICON structure CaTP, cons deactivation of the electro oxidation is observed the closed structure type NaTP.

  2. Alopecia areata ofiásia na infância: do diagnóstico ao tratamento

    Directory of Open Access Journals (Sweden)

    José Otávio Alquezar Gozzano

    2016-10-01

    Full Text Available Introdução: Entre as alopecias mais comuns na infância está a alopecia areata (AA, uma afecção crônica dos folículos pilosos, de etiologia auto-imune e genética. Apresenta-se pela queda de pelos, devido a interrupção de sua síntese, sem a atrofia dos folículos, por isso é reversível. AA afeta ambos os sexos e inicia- se em qualquer idade; porém, 60% dos primeiros episódios ocorrem entre 5 e 20 anos. AA manifesta-se por placas de alopecia assintomáticas, arredondadas, sem inflamação, podendo afetar qualquer área com folículos pilosos, frequentemente o couro cabeludo. Sinal de tração positivo, pelos cadavéricos e penugem branca no exame físico da fase aguda auxiliam o diagnóstico. AA é classificada como atípica e clássica, esta última pode ser: placa única, placas múltiplas, AA total, ou AA ofiásica (AAO. AAO consiste na perda de cabelos na linha de implantação temporooccipital, atingindo as bordas inferiores do couro cabeludo; seu diagnóstico é clinico devendo ser diferenciado de Tinha do couro cabeludo, pseudopelada de Brocq e tricotilomania. O tratamento para AAO é sintomático e não altera o prognóstico, sendo utilizados principalmente corticoides tópicos, infiltrações intralesionais, antralina e minoxidil. Objetivo: Relatar caso de AAO na infância. Relato do caso: Feminina, 13 anos, com perda de cabelos há 4 anos e piora há 6 meses. Ao exame: área extensa de alopecia em região temporoocciptal até margem inferior de implantação do couro cabeludo. Sinal de tração positivo na periferia da área de alopecia. Hipótese diagnóstica: AAO. Terapia: infiltração de corticoide. Metodologia: Paciente atendida em ambulatório e revisão de literatura. Conclusão: Por acometer sobretudo os cabelos, AA afeta a autoestima e os aspectos psicológicos, principalmente das crianças, que crescem em meio propício a julgamentos e rejeição social. Assim, é importante a intervenção terapêutica precoce

  3. Phase formation in Na2MoO4 - MgMoO4 - Cr2(MoO4)3 system

    International Nuclear Information System (INIS)

    Kotova, I.Yu.; Kozhevnikova, N.M.

    1998-01-01

    Interaction within Na 2 MoO 4 - MgMoO 4 - Cr 2 (MoO 4 ) 3 ternary system is studied by X ray phase and DTA methods. State diagram of NaCr(MoO 4 ) 2 - MgMoO 4 section is plotted. Production of ternary molybdates of Na 1-x Mg 1-x Cr 1+x (MoO 4 ) 3 , where 0 ≤ x ≤ 0.3, and NaMg 3 Cr(MoO 4 ) 5 composition is ascertained [ru

  4. The xGa{sub 2}O{sub 3}–(100 − x)NaPO{sub 3} glass system: Preparation, properties and structural analysis by solid state NMR

    Energy Technology Data Exchange (ETDEWEB)

    Caron, A. [UCCS UMR-CNRS 8181, Université de Lille1, Villeneuve d' Ascq (France); Doumert, B. [IMMCL, Université de Lille1, Villeneuve d' Ascq (France); Tricot, G., E-mail: gregory.tricot@univ-lille1.fr [UCCS UMR-CNRS 8181, Université de Lille1, Villeneuve d' Ascq (France); LASIR UMR-CNRS 8516, Université de Lille1, Villeneuve d' Ascq (France)

    2014-10-15

    Insertion of Ga{sub 2}O{sub 3} in sodium metaphosphate glasses has been investigated in this paper. Materials containing up to 30 mol% of Ga{sub 2}O{sub 3} have been prepared using the standard melt-quenching technique within the xGa{sub 2}O{sub 3}–(100 − x)NaPO{sub 3} composition line. Macroscopic properties (glass transition temperature, density and molar volume) are significantly affected by the Ga{sub 2}O{sub 3} insertion. 1D {sup 71}Ga and {sup 31}P magic angle spinning nuclear magnetic resonance (MAS-NMR) performed at very high field (18.8 T) indicate a strong evolution of the gallium coordination state around the x = 15 composition and a continuous evolution of the phosphate network organisation. In addition, {sup 71}Ga({sup 31}P) D-HMQC NMR technique was used for the first time to highlight the presence of mixed P–O–Ga linkages within the glass structure. The impact of gallium insertion is finally discussed and compared to the effect of the widely used aluminum and boron elements. If gallium and aluminum elements present similar effect on the macroscopic properties, some discrepancies can be observed concerning their structural effect. - Highlights: • Glasses with 30 mol% of Ga{sub 2}O{sub 3} have been prepared in the NaPO{sub 3}–Ga{sub 2}O{sub 3} line. • T{sub g} and density are affected by the Ga{sup 3+} insertion. • Presence of mixed Ga/P species have been highlighted by 2D correlation NMR.

  5. Structural and magnetic properties of the (Ca1-xNax)(Fe2-xTix)O4 solid solution (0 ≤ x ≤ 1)

    International Nuclear Information System (INIS)

    Zouari, S.; Ranno, L.; Cheikh-Rouhou, A.; Isnard, O.; Wolfers, P.; Bordet, P.; Strobel, P.

    2008-01-01

    New compounds corresponding to the (Ca 1-x Na x )(Fe 2-x Ti x )O 4 formula with 0 ≤ x ≤ 1 were prepared by solid state reactions at 1100 deg. C in air. A continuous solid solution was found between end members CaFe 2 O 4 and NaFeTiO 4 . The evolution of structural parameters and bonding geometry with composition is discussed in detail. Magnetic measurements show that the antiferromagnetic ordering known in CaFe 2 O 4 is suppressed for all x values investigated (x ≥ 0.2). The absence of crystallographic transition at low temperature was checked by X-ray diffraction down to 10 K. The magnetic structure of CaFe 2 O 4 was redetermined from powder neutron diffraction. Spins on the two iron sites order antiparallel (F z F z spin arrangement), as described previously. The difference in magnetic moments on Fe 1 and Fe 2 sites result in a ferrimagnetic configuration with net moment 2.72μ B at 2 K

  6. Structural, magnetic and electrical properties of self-doped La{sub 0.8}Na{sub 0.2−x}□{sub x}MnO{sub 3} manganites

    Energy Technology Data Exchange (ETDEWEB)

    Khlifi, M., E-mail: khlifimouadh3000@yahoo.fr; Wali, M.; Dhahri, E.

    2014-09-15

    Polycrystalline compounds La{sub 0.8}Na{sub 0.2−x}□{sub x}MnO{sub 3} were prepared by the solid-state reaction with 0.00≤x≤0.15. Structural, magnetic and electrical measurements were investigated. The XRD data have been analyzed by Rietveld refinement technique which reveals that all samples are crystallized in a rhombohedral structure with R3{sup ¯}c space group. Magnetic measurement versus temperature shows that all samples exhibit a magnetic transition from ferromagnetic (FM) to paramagnetic (PM) phase when increasing temperature. The Curie temperature (T{sub C}) decrease from 340 K for x=0.00 samples to 260 K for x=0.15 one. Hysteresis cycles confirm the ferromagnetic character at low temperature with a decrease of the remanent magnetization and the coercive field when the vacancy rate increases. Moreover, the temperature dependence of electrical resistivity shows a metal–insulator transition at T{sub ρ} for all samples. In addition, T{sub ρ} decreases with vacancy content in accordance with T{sub C}. Thus, the conduction mechanism was explained by the adiabatic small polaron hopping (ASPH) in the insulating region and by the competition between the small-polaron and spin-wave scattering and the electron–magnon scattering mechanisms. Finally, the minimum of resistivity at very low temperature range is explained by the Kondo-like scattering model.

  7. Thermal and mechanical properties of lead-free SnZn–xNa casting alloys, and interfacial chemistry on Cu substrates during the soldering process

    Energy Technology Data Exchange (ETDEWEB)

    Gancarz, Tomasz, E-mail: tomasz.gancarz@imim.pl [Institute of Metallurgy and Materials Science, Polish Academy of Sciences, Krakow (Poland); Bobrowski, Piotr; Pstruś, Janusz [Institute of Metallurgy and Materials Science, Polish Academy of Sciences, Krakow (Poland); Pawlak, Sylwia [Wroclaw Research Centre EIT+, Wroclaw (Poland)

    2016-09-15

    The microstructural features, thermal properties and mechanical properties of eutectic Sn–Zn alloys with varying Na content (0.1, 0.2, 0.5, 1.0 3.0 and 5.0 at. %) were examined in this study. In the scanning electron microscopy, transmission electron microscopy, and X-ray diffraction analysis data, precipitates of NaSn were observed. The addition of Na to eutectic Sn–Zn alloy improved the mechanical properties and increased electrical resistivity, and reduced the coefficient of thermal expansion; however, the melting point did not change. Wettability tests carried out using Na-doped Sn–15Zn alloys on Cu substrates showed the formation of Cu–Zn phases at the interfaces. Wettability studies were performed using flux ALU33 after 60, 180, 480, 900, 1800 and 3600 s of contact, at temperatures of 230, 250, 280 and 320 °C. The experiments were designed to demonstrate the effect of Na addition on the formation and growth kinetics of Cu{sub 5}Zn{sub 8} and CuZn{sub 4} phases, which were identified using XRDs and EDS. The addition of Na to SnZn causes a reduction in the thickness of the intermetallic compounds layer created at the interface between the liquid solder and the Cu substrate, and an increase in the activation energy of the Cu{sub 5}Zn{sub 8} phase compared to eutectic SnZn. - Highlights: • Precipitates of NaSn was observed and confirmed using TEM and XRD. • Addition Na to eutectic SnZn cussed increased the mechanical properties. • IMCs of Na–Zn and Na–Sn increased electrical resistivity and reduced the CTE. • IMCs layers CuZn{sub 4} and Cu{sub 5}Zn{sub 8} was found at the interface. • Na content changing the character of growth CuZn{sub 4} layer in SnZnNa alloys.

  8. Ossificação do ligamento longitudinal posterior na coluna cervical: relato de caso Ossification of the posterior longitudinal ligament in the cervical spine: case report

    Directory of Open Access Journals (Sweden)

    ROSANA HERMINIA SCOLA

    1998-09-01

    Full Text Available A ossificação do ligamento longitudinal posterior (OLLP é causa incomum de mielopatia compressiva na população caucasiana. É relatado o caso de um paciente do sexo masculino com um quadro de paraparesia espástica, cuja investigação radiológica mostrou OLLP. O raio-X de coluna cervical mostrou imagem laminar, vertical, com densidade óssea, posterior aos corpos vertebrais, que se estendia de C2 a T1. A tomografia computadorizada (TC e a mielotomografia mostravam OLLP causando compressão medular ântero-posterior no segmento descrito. Na ressonância magnética, observou-se área de hiperintensidade em T2 no segmento C7-T1, compatível com mielomalácia. O paciente foi submetido a laminoplastia tipo "open-door", com melhora do quadro parético dos membros inferiores. A OLLP deve entrar no diagnóstico diferencial das mielopatias cervicais, sendo facilmente diagnosticada através de radiografias e TC da coluna cervical. São revisados os aspectos clínicos e radiológicos e o tratamento da OLLP.Ossification of the posterior longitudinal ligament (OPLL is an uncommon cause of compressive myelopathy in the Caucasian population. A case of spastic paraparesis in a Caucasian man whose radiological investigation showed OPLL is presented. The radiographs of the cervical spine showed a strip of bony density posterior to the vertebral bodies, extending from C2 to T1. Computerized tomography (CT and CT myelography showed OPLL at the same level. Magnetic resonance showed an area of increased signal on T2-weighted sequences at C7-T1 level suggestive of myelomalacia. The patient underwent an open-door laminoplasty (C2 to C7 with improvement of the paraparesis. OPLL should be included in the differential diagnosis of cervical myelopathy. It can be easily detected by plain radiographs and CT of the cervical spine. A review of the clinical and radiological features and the treatment of OPLL is presented.

  9. Luminescent properties of UV excitable blue emitting phosphors MSr4(BO3)3:Ce3+ (M = Li and Na)

    International Nuclear Information System (INIS)

    Guo Chongfeng; Ding Xu; Seo, Hyo Jin; Ren Zhaoyu; Bai Jintao

    2011-01-01

    Research highlights: → Novel blue emitting phosphors borate MSr 4 (BO 3 ) 3 (M = Li or Na) were prepared first. → Luminescent properties of phosphors borate MSr 4 (BO 3 ) 3 (M = Li or Na) were investigated extensively as candidates of blue emitting phosphor used for UV excited LED. → The optimal concentrations of dopant Ce 3+ ions in compound MSr 4 (BO 3 ) 3 (M = Li or Na) were determined as 0.05 for Li and x = 0.09 for Na excited by UV light respectively. - Abstract: A series of Ce 3+ doped novel borate phosphors MSr 4 (BO 3 ) 3 (M = Li or Na) were successfully synthesized by traditional solid-state reaction. The crystal structures and the phase purities of samples were characterized by powder X-ray diffraction. The optimal concentrations of dopant Ce 3+ ions in compound MSr 4 (BO 3 ) 3 (M = Li or Na) were determined through the measurements of photoluminescence spectra of phosphors. Ce 3+ doped phosphors MSr 4 (BO 3 ) 3 (M = Li or Na) show strong broad band absorption in UV spectral region and bright blue emission under the excitation of 345 nm light. In addition, the temperature dependences of emission spectra of M 1+x Sr 4-2x Ce x (BO 3 ) 3 (M = Li or Na) phosphors with optimal composition x = 0.05 for Li and x = 0.09 for Na excited under 355 nm pulse laser were also investigated. The experimental results indicate that the M 1+x Sr 4-2x Ce x (BO 3 ) 3 (M = Li or Na) phosphors are promising blue emitting phosphors pumped by UV light.

  10. ASPECTOS DA VARIAÇÃO AMBIENTAL EM UMA FLORESTA DE GALERIA EM ITUTINGA, MG, BRASIL

    Directory of Open Access Journals (Sweden)

    Flavio Antonio Maës dos Santos

    2003-09-01

    Full Text Available Foi caracterizada a heterogeneidade ambiental em uma área de floresta de galeria (7,55 ha, em Itutinga, MG, Brasil, pelas variações das propriedades químicas e físicas do solo, da topografia e da abertura de dossel. As propriedades do solo e a topografia foram estudadas em 28 parcelas de 10 x 30 m utilizadas em um levantamento da comunidade arbóreo-arbustiva da área. Para a abertura do dossel utilizaram-se duas transecções de 50 m de largura, compostas por parcelas contíguas de 10 x 10 m, cruzando a floresta de lado a lado, perpendicularmente ao curso d’água. Fotos hemisféricas foram tomadas sobre estacas alternadas das extremidades das parcelas. Os dados de solo e topografia foram analisados por meio de uma PCA (Análise dos Componentes Principais e a abertura do dossel mediante gráficos de tendência e regressão linear. A variação mais importante em termos de solos e abertura do dossel se deu no sentido do distanciamento da borda da floresta e aproximação do curso d’água. Nesse sentido, a abertura do dossel diminuiu (b = -0,096; R2 = 0,34 e a umidade e acidez do solo aumentaram (Eixo 1 do PCA, autovalor = 9,713. Os maiores valores da abertura do dossel próximo à borda foram explicados pela entrada de luz lateral através da borda da floresta com o campo limpo circundante.

  11. Use of X-ray fluorescence with energy dispersion, and the total reflexions in the analysis of environmental samples; Uso da fluorescencia de raios X com dispersao de energia e da reflexao total na analise de amostras ambientais

    Energy Technology Data Exchange (ETDEWEB)

    Simabuco, Silvana Moreira [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Faculdade de Engenharia Civil; Nascimento Filho, Virgilio Franco do [Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil)

    1996-12-31

    This communication reports the present status of the research on the use of wavelength dispersive X-ray fluorescence and radioisotopic excitation for quantitative analysis of environmental samples. Simultaneous instrumental determination of various element concentration have been performed, particularly Al, Si, S, Cl, K, Ca, Ti, Mn, Fe, Cu, Zn, Rb, Zr and Nb existent in soils with different textures. Also, quantitative analysis has been performed on sediment samples, based on the fundamental parameters for quantification of Z >= 13 elements, and the coherent and incoherent scattered excitation radiation for quantification of the matrix (Z < 13) light fraction 16 refs., 1 fig.

  12. Preparation and physical properties of (PVA0.7(NaBr0.3(H3PO4xM solid acid membrane for phosphoric acid – Fuel cells

    Directory of Open Access Journals (Sweden)

    F. Ahmad

    2013-03-01

    Full Text Available A solid acid membranes based on poly (vinyl alcohol (PVA, sodium bromide (NaBr and phosphoric acid (H3PO4 were prepared by a solution casting method. The morphological, IR, electrical and optical properties of the (PVA0.7(NaBr0.3(H3PO4xM solid acid membranes where x = 0.00, 0.85, 1.7, 3.4, 5.1 M were investigated. The variation of film morphology was examined by scanning electron microscopy (SEM studies. FTIR spectroscopy has been used to characterize the structure of polymer and confirms the complexation of phosphoric acid with host polymeric matrix. The temperature dependent nature of ionic conductivity and the impedance of the polymer electrolytes were determined along with the associated activation energy. The ionic conductivity at room temperature was found to be strongly depends on the H3PO4 concentration which it has been achieved to be of the order 4.3 × 10−3 S/cm at ambient temperature. Optical measurements showed a decrease in optical band gap and an increase in band tail width with the increase of phosphoric acid. The data shows that the (PVA0.7(NaBr0.3(H3PO4xM solid acid membrane is promising for intermediate temperature phosphoric acid fuel cell applications.

  13. Structural Transition and Electrical Properties of (1 - x)(Na0.4K0.1Bi0.5)TiO3- xSrTiO3 Lead-Free Piezoceramics

    Science.gov (United States)

    Liu, Xing; Zhai, Jiwei; Shen, Bo; Li, Feng; Li, Peng

    2017-10-01

    (1 - x)(Na0.4K0.1Bi0.5)TiO3- xSrTiO3 (NKBT- xST) ceramics with x = 0 mol.%, 3 mol.%, and 5 mol.% (0ST, 3ST, and 5ST) have been prepared by a conventional solid-state reaction method and their ferroelectric, electrostrictive, and pyroelectric properties investigated. Addition of ST considerably disrupted the long-range ferroelectric order of NKBT- xST ceramics, and the 5ST ceramic exhibited ergodic relaxor phase structure. T FR shifted to near or below room temperature for 5ST ceramic, accompanied by a significant decline of ferroelectricity and enhanced strain. As the temperature approached T FR, the NKBT- xST ceramics exhibited predominantly electrostrictive effect, and the 5ST ceramic presented relatively high electrostrictive coefficient Q 33 of 0.0193 m4/C2. High pyroelectric response was observed for 0ST, 3ST, and 5ST ceramics in the vicinity of T FR due to the large polarization release during the ferroelectric-relaxor structural transition. The 5ST ceramic exhibited high and frequency-insensitive (100 Hz to 10 kHz) room-temperature pyroelectric properties with pyroelectric coefficient p of 656 μC m-2 K-1 and figures of merit F i, F v, and F d reaching 233 pm/V, 0.013 m2/C, and 7.61 μPa-1/2, respectively, indicating that 5ST ceramic is a promising candidate to replace PZT-based ceramics.

  14. Evaluation of different X ray equipment and incubators for pediatric radiographic images implementation;Avaliacao de diferentes equipamentos de raios-X e incubadoras para implementacao de imagens radiograficas pediatricas

    Energy Technology Data Exchange (ETDEWEB)

    Carbi, E.D.O.; Souza, R.T.F.; Pina, D.R. [UNESP, Botucatu, SP (Brazil). Faculdade de Medicina. Dept. de Doencas Tropicais e Diagnostico por Imagem

    2009-07-01

    The children frequent/y are exposed to the ionizing radiation and other emotional and physical risks in the attempts repeated to get radiographic images of quality. This study it has as objective to evaluate X ray beam about quality and intensity at three different equipment with single-phase generator of voltage and the absorption factors to 5 different incubators and 3 different cradles in the neonatal UTI of the Clinics Hospital on the Medicine College in Botucatu. The methodology consisted of carrying through measured of half Layer Value and Radiation output for the different X ray equipment with voltage with in between 45 and 100 kVp, applied at the X ray tube. The measures of the absorption factors had been carried through varying the thicknesses of attenuating material (phantom) for the different voltage value with in between 50 and 100kVp. The results had shown the same energy effective for the different X ray equipment and the same absorption factors for the different incubators and evaluated cradles, taking into account, the same thickness of attenuating material and same voltage. (author)

  15. Evaluation of structure, dielectric and electrical properties of (Li/Ta/Sb modified (Na, K NbO3 lead-free ceramics with excess Na concentration

    Directory of Open Access Journals (Sweden)

    Md. Kashif Shamim

    2017-12-01

    Full Text Available Polycrystalline perovskite structured (Li0.04 (Na0.54+x K0.460.96 (Nb0.81Ta0.15 Sb0.04 O3 ceramics with x=0.00, 0.005 and 0.01 mole excess Na concentration were prepared by solid state sintering method. The present study relates the role of excess Na addition with the stoichiometry, density, structure, dielectric and ferroelectric properties of the samples. X-ray diffraction (XRD pattern exhibits single phase orthorhombic structure. The characteristic Raman modes were observed due to translational modes of cations and vibrational modes of NbO6 octahedra and no structural phase transition were observed. This confirms the formation of single phase perovskite structure and is consistent with XRD results. The dielectric permittivity increases about two times, while dielectric loss decreases by four times for x=0.01 composition. The electrical measurements carried by Complex Impedance spectroscopic analysis suggest negative temperature coefficient of resistance (NTCR behavior.

  16. Synthesis of hydroxyapatite and structural refinement by X-ray diffraction; Sintese da hidroxiapatita e refinamento estrutural por difracao de raios-X

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Jorge Correa de [Universidade do Estado do Rio de Janeiro (UERJ), Sao Goncalo, RJ (Brazil). Faculdade de Formacao de Professores; Sena, Lidia [Instituto Nacional de Metrologia, Normalizacao e Qualidade Industrial (INMETRO), Duque de Caxias, RJ (Brazil). Div. de Metrologia de Materiais; Bastos, Ivan Napoleao [Universidade do Estado do Rio de Janeiro (UERJ), Nova Friburgo, RJ (Brazil). Inst. Politecnico]. E-mail: jcaraujo@iprj.uerj.br; Soares, Gloria Dulce de Almeida [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil)

    2007-07-01

    A sample of hydroxyapatite was synthesized and its crystalline structure was analyzed by X-ray diffraction by means of the Rietveld method. Two functions were used to fit the peak profiles, modified Voigt (TCHZ) and Pearson VII. The occupational factors and lattice parameters obtained by both models show that the sample does not contain relevant cationic substitutions. The interatomic distances from Ca1 to oxygens O1, O2 and O3 were adequate for a pure hydroxyapatite without defect at site Ca1. Besides, the use of multiple lines in planes (300) and (002) associated with the model Pearson VII resulted in good agreement with the TCHZ model with respect to the size-strain effects with an ellipsoidal shape of crystallites. In conclusion, the procedures adopted in the synthesis of hydroxyapatite produced a pure and crystalline material. The experimental results of transmission electron microscopy confirmed the predicted shape of crystals. (author)

  17. Evolução do processo de decoração na indústria de revestimentos cerâmicos: impressão jato de tinta

    Directory of Open Access Journals (Sweden)

    M. Cristiano

    2015-09-01

    Full Text Available ResumoNos últimos 20 anos as empresas cerâmicas buscam incessantemente aprimorar suas tecnologias a fim de se tornarem mais competitivas no mercado mundial. O sistema de decoração mais utilizado na indústria cerâmica é o de rotocolor, entretanto este apresenta limitações que interferem na qualidade e produção dos revestimentos cerâmicos. Sendo assim, está aumentando o número de empresas que estão se adaptando ao novo sistema de impressão por jato de tinta para o processo de decoração de seus produtos. Baseado nesta informação este trabalho consiste em verificar as características das tintas do processo de decoração por jato de tinta e averiguar os benefícios da utilização deste sistema quando comparado ao sistema de rotocolor. O trabalho foi realizado mediante a pesquisa bibliográfica e a experimentos laboratoriais. Em laboratório foram realizados os seguintes ensaios: densidade e viscosidade em tempo de escoamento, distribuição do tamanho de partículas, determinação reológica, difratometria de raios X, microscopia óptica com aumento de 200x e colorimetria. Diante dos resultados obtidos foi possível detectar que as tintas apresentam características não nanométricas relacionadas ao contexto teórico que para ser um material nanométrico deve-se conter tamanhos de partículas todos abaixo de 100 nm, porém as tintas apresentam como menor tamanho o valor de 105,7 nm. Através destes resultados foi possível explicar alguns problemas técnicos que usualmente ocorrem nas impressoras e pela análise de micrografia demonstrou-se que a técnica de impressão digital é mais eficiente e proporciona maior qualidade aos produtos quando comparada à impressão por sistema de rotocolor. Detectou-se que ao alterar a temperatura de sinterização, ou seja, temperaturas necessárias perante as modificações usuais nos fornos de indústrias produtoras de placas cerâmicas de revestimento ocorre uma diferença de tonalidade

  18. Envolvimento pulmonar na polimiosite

    Directory of Open Access Journals (Sweden)

    Direndra Hasmucrai

    2010-07-01

    Full Text Available Resumo: Introdução: A polimiosite (PM e a dermatomiosite são classificadas como miopatias inflamatórias idiopáticas. O envolvimento pulmonar por PM é pouco frequente, estando descrito na literatura em cerca de 10% de casos.Os autores apresentam um caso de uma mulher de 75 anos, com queixas de febre, perda ponderal, artralgias, mialgias e diminuição simétrica e proximal da força muscular com impotência funcional dos membros superiores e inferiores, com início um mês antes do internamento. Apresentava infiltrados pulmonares na telerradiografia de tórax. Após estudo exaustivo estabeleceu-se o diagnóstico de envolvimento pulmonar na forma de pneumonia organizativa por PM. Efectuou-se corticoterapia e terapêutica com micofenolato com melhoria clínica, analítica e radiológica. Conclusão: Neste caso, foi a alteração na telerradiografia de tórax numa doente sem sintomatologia respiratória que levou ao estudo exaustivo até ao diagnóstico de PM, realçando mais uma vez a importância da telerradiografia no rastreio de patologias de outros foros. Abstract: Introduction: Polymyositis and dermatomyositis are classified as idiopathic inflammatory myopathies. Interstitial lung disease is rare and is described in the literature in about 10% of cases.The authors describes a case of 75 year old woman presenting with one month evolution of fever, weight loss, arthralgia, myalgia and symmetric and proximal muscle weakness of upper and lower limbs. Nonspecific interstitial changes was found in chest X-ray. After exhaustive study, the diagnosis of pulmonary envolvement in the form of organizing pneumonia by polymyositis, was established. Glucocorticoids and mycophenolate were prescribed with good clinical, analytical and radiological outcome. Conclusion: In this case, it was the changes in the chest X-ray in a patient without respiratory symptomatology, that conducted to exhaustive study to polymyositis diagnosis, enhancing once again the

  19. Incorporação de lodo da estação de tratamento de esgoto (ETE em cerâmica vermelha

    Directory of Open Access Journals (Sweden)

    I. O. R. Areias

    Full Text Available Resumo Este trabalho teve por objetivo avaliar a incorporação de resíduo de estação de tratamento de esgoto (ETE na produção de cerâmica vermelha. As matérias-primas utilizadas foram: massa cerâmica argilosa e resíduo de ETE provenientes do município de Campos dos Goytacazes - RJ. As matérias-primas foram caracterizadas pelas técnicas de fluorescência de raios X e difração de raios X; além disso, foi determinada a área de superfície específica das mesmas por meio das técnicas de BET e azul de metileno. O comportamento térmico do resíduo de ETE foi avaliado por meio de análise termogravimétrica. Formulações foram preparadas com 0, 2,5, 10 e 15% em massa de resíduo de ETE incorporados à massa argilosa. Corpos de prova foram confeccionados por prensagem uniaxial a 20 MPa com 8% de umidade para calcinação a 950 °C. As propriedades físicas e mecânicas avaliadas das cerâmicas calcinadas foram retração linear, absorção de água e resistência à compressão. A microestrutura destas peças foi investigada com auxílio de microscopia eletrônica de varredura. Os resultados indicaram que este tipo de resíduo deve ser incorporado em pequenas quantidades (até 2,5% para não prejudicar as propriedades físicas e mecânicas da cerâmica.

  20. A Influência dos parâmetros de deposição na morfologia dos eletrólitos para células a combustível de óxido sólido, à base de filmes de zircônia: 8 mol% ítria depositados por spray pirólise

    Directory of Open Access Journals (Sweden)

    C. H. M. Rodrigues

    2013-09-01

    Full Text Available Foram produzidos filmes de zircônia estabilizada com 8 mol% de itria (8YSZ por spray pirólise, que podem ser aplicados como eletrólitos de células a combustível de óxido sólido. A técnica de spray pirólise tem como vantagens ser de simples manuseio, baixo custo de operação, versátil e eficiente na obtenção dos filmes cerâmicos. Entretanto, como desvantagens principais encontram-se a grande quantidade de fatores que interferem na qualidade e a reprodutibilidade. Visando estabelecer a influência destes parâmetros na morfologia dos filmes, utilizou-se a técnica de planejamento de experimentos, com três parâmetros determinados com principais: temperatura de deposição (T, fluxo da solução (F e tempo de deposição (t. A morfologia dos filmes foi analisada por microscopia ótica com aumentos de 400x em campo claro e escuro, avaliando a presença de trincas, poros, partículas salinas e rugosidade. Para a execução das análises empregou-se o software ImageJ, que possibilitou a quantificação da influência dos parâmetros de deposição na morfologia. Realizou-se a modelagem dos resultados obtendo-se que os filmes de melhor morfologia, dentro dos parâmetros estudados, seriam produzidos com temperatura de deposição 320 ºC, tempo de deposição 32 min e fluxo 1,4 mL/min. O filme de 8YSZ depositado com os parâmetros modelados foi tratado termicamente a 1000 ºC por 300 min com o objetivo de se alcançar a estrutura cristalina cúbica do tipo fluorita. A estrutura do filme foi analisada por difração de raios X, apresentando-se policristalino e com estrutura cúbica de face centrada do tipo fluorita, com orientação preferencial dos grãos no plano (111. As propriedades morfológicas dos filmes foram analisadas por microscopia de força atômica, indicando ter-se obtido um filme homogêneo, isento de microtrincas e microporos.

  1. Spectroscopic studies, theoretical models and structural characterization. II. Synthesis and X-ray powder diffraction of the elpasolites Cs2NaSmCl6

    International Nuclear Information System (INIS)

    Poblete, V.; Acevedo, R.

    1998-01-01

    In this research work, we report the synthesis and structural characterization of the stoichiometric elpasolite Cs 2 NaSmCl 6 . The synthesis was performed under a solid state reaction in nitrogen atmosphere from the chemicals CsCl, NaCl and SmCl 3 weighted stoichiometrically. The best possible crystallization temperature was obtained using thermal studies of the type DTA/TGA (the thermal treatment was allowed to proceed for 2.5 hours at 755 Centigrade, showing a temperature gradient of 10 Centigrade/minute). The structural characterization by powder X-ray diffraction (XDR) indicates that this elpasolite belongs to the Fm 3m (O h 5 ) space group and the optimized structural parameters are as follows: a 0 = 10.8342 Armstrong, V 1271.72 Armstrong 3 , Z=4, M=651.88, D x =3.406 y D exp=3.41 ± 0.01. The profile refinement, using the Rietveld method, allowed us to fit the experimental and the calculated intensities of a total of 32 lines. The above result indicates that the condition R exp 2+ + 3Cl -1 and the counter ions filling the octahedral holes, in full agreement with anti fluorite type crystal. According to the above description, these elpasolite adopt the form (M 1/3 □ 2/3 ) 4 X 2 , where M labels the central metal, X stand for the chlorine ions and □ represent the vacancies, which may accommodate a significant amount of defects without collapsing. This experimental study provides the necessary input to test theoretical models against experimental data. (Author)

  2. Sodium source development for pulsed power driven, photopumped NA/NE x-ray laser experiments

    International Nuclear Information System (INIS)

    Burkhalter, P.G.; Cooperstein, G.; Mosher, D.; Ottinger, P.F.; Scherrer, V.E.; Stephanakis, S.J.; Young, F.C.; Hinshelwood, D.D.; Mehlman, G.; Welch, B.L.; Jones, W.D.

    1988-01-01

    A sodium plasma source is being developed for a resonant photopumping x-ray laser scheme in which the 11A 1s 2 - 1s2rho 1 P 1 line in heliumlike Na X is used to pump the Ne IX n=4 singlet level. In their experiment the NRL Gamble II generator is used to produce two z-pinch plasmas in a side-by-side geometry. The sodium plasma is produced on axis and conducts the full 1 MA machine current. A fraction of this current returns through a neon gas puff located 5 cm from the sodium. This separation is determined by the need to prevent the plasmas from mixing and the need to have each plasma's azimuthal magnetic field as symmetric as possible. A minimum separation is desirable to increase coupling efficiency. To improve the pump source, a more confined source of pure sodium involving a coaxial plasma gun is being developed. They are currently studying both the operation of this source on a test stand and implosions of the resulting plasma on Gamble II. In initial experiments aluminum is substituted for sodium. Test stand diagnostics include photodiodes, witness plates, and current monitors designed to investigate the early motion of the annular plasma. Results from test stand and Gamble II experiments with both aluminum and sodium, as well as sodium handling techniques, are presented

  3. Electrochemical Behavior Assessment of As-Cast Mg-Y-RE-Zr Alloy in Phosphate Buffer Solutions (X Na3PO4 + Y Na2HPO4) Using Electrochemical Impedance Spectroscopy and Mott-Schottky Techniques

    Science.gov (United States)

    Fattah-alhosseini, Arash; Asgari, Hamed

    2018-05-01

    In the present study, electrochemical behavior of as-cast Mg-Y-RE-Zr alloy (RE: rare-earth alloying elements) was investigated using electrochemical tests in phosphate buffer solutions (X Na3PO4 + Y Na2HPO4). X-ray diffraction techniques and Scanning electron microscopy equipped with energy dispersive x-ray spectroscopy were used to investigate the microstructure and phases of the experimental alloy. Different electrochemical tests such as potentiodynamic polarization (PDP), electrochemical impedance spectroscopy (EIS) and Mott-Schottky (M-S) analysis were carried out in order to study the electrochemical behavior of the experimental alloy in phosphate buffer solutions. The PDP curves and EIS measurements indicated that the passive behavior of the as-cast Mg-Y-RE-Zr alloy in phosphate buffer solutions was weakened by an increase in the pH, which is related to formation of an imperfect and less protective passive layer on the alloy surface. The presence of the insoluble zirconium particles along with high number of intermetallic phases of RE elements mainly Mg24Y5 in the magnesium matrix can deteriorate the corrosion performance of the alloy by disrupting the protective passive layer that is formed at pH values over 11. These insoluble zirconium particles embedded in the matrix can detrimentally influence the passivation. The M-S analysis revealed that the formed passive layers on Mg-Y-RE-Zr alloy behaved as an n-type semiconductor. An increase in donor concentration accompanying solutions of higher alkalinity is thought to result in the formation of a less resistive passive layer.

  4. Refractory oxides containing aluminium and barium Oxidos refratários contendo alumínio e bário

    Directory of Open Access Journals (Sweden)

    T. J. Davies

    1998-10-01

    Full Text Available Oxides containing aluminium and barium, optionally with chromium, are refractory with several possible industrial uses. A gel precursor of an oxide having the formula BaO.n(Al2xCr2yO3, where 1Oxidos contendo alumínio e bário, opcionalmente com crômio, são refratários com vários possíveis usos industriais. Foi preparado um gel precursor de um óxido de formula BaO.n(Al2xCr2yO3, com 1x+y=1 e 0raios X e ressonância magnética nuclear com 27AL mostraram que o bário não é incorporado diretamente na estrutura do gel. Oxidos de alumínio e bário foram obtidos somente após liquefação de espécies de bário. Foi preparada uma mistura de pós adequada para queima para se obter um óxido de fórmula BaO.m[Al2x Cr2y O3] com 4,6x+y= 1 e 0na queima valores desejados de m e de y. Corpos cerâmicos resistentes da fórmula BaO 6 Al2O3 (m=6 e y=0 foram preparados. Estudos de difração de raios X de óxidos de composições (n ou m=6 e y=0 sinterizados em alta temperatura mostraram que mono-aluminato de bário é uma fase intermediária de baixa temperatura. Cromo III reduz a temperatura necessária para formar um óxido de alumínio e bário. É feito um sumário de trabalhos anteriormente publicados.

  5. Effect of sediment composition on methane concentration and production in the transition zone of a mangrove (Sepetiba Bay, Rio de Janeiro, Brazil Efeito da composição do sedimento sobre a concentração e a produção do metano na zona de transição de um mangue tropical, na Baía de Sepetiba-RJ, Brasil

    Directory of Open Access Journals (Sweden)

    CC. Marinho

    2012-08-01

    Full Text Available The aim of this research was to evaluate the effect of sediment composition on methane (CH4 dynamics in sediments of different areas in the transition zone between a mangrove and the sea. This research was conducted in a mangrove at Coroa Grande, on the southern coast of Rio de Janeiro. Samples were collected at three stations: (1 region colonised by Rhizophora mangle L. on the edge of the mangrove, (2 region colonised by seagrasses and (3 infra-littoral region without vegetation. Samples were collected from the surface layer of the sediment to determine the concentrations of nutrients (C, N and P and CH4 concentration and production. We observed that concentrations of CH4 and carbon (C were significantly higher (p O objetivo desta pesquisa foi avaliar a dinâmica do metano (CH4 no sedimento em diferentes áreas na região de transição entre a borda do manguezal e o mar, em função da composição do sedimento. A pesquisa foi realizada no Manguezal de Coroa Grande, no litoral sul do Estado do Rio de janeiro. Foram coletadas amostras em três estações: (1 região colonizada por Rhizophora mangle L. na borda do mangue, (2 região colonizada por macrófitas, e (3 região sem vegetação, permanentemente inundada pelo mar. Foram coletadas amostras da fração superficial do sedimento para determinação da concentração de nutrientes (C, N e P, e da concentração e da produção de CH4. Foi observado que as concentrações de CH4 e carbono (C foram significativamente maiores (p < 0,05 na estação 1, em relação à estação 3. Com relação às razões molares (C:N, C:P e N:P, estas indicam que a origem da composição do substrato é principalmente autóctone. Quanto à metanogênese, foram observados, inicialmente, baixos valores de CH4 produzido, indicando provável competição entre metanogênicos e sulfatorredutores. Seguiu-se, então, um significativo aumento (p < 0,05 da metanogênese no 26º dia, no sedimento da estação 1

  6. One-Pot Synthesis, X-Ray Diffraction and MAS NMR Spectroscopic Study of Gallosilicate Nitrate Cancrinite Na8[GaSiO4]6(NO34(H2O6

    Directory of Open Access Journals (Sweden)

    Ashok V. Borhade

    2010-01-01

    Full Text Available One-pot synthetic gallosilicate nitrate cancrinite (CAN framework topology have been synthesized under hydrothermal conditions at 100 °C. The synthesized product was characterized by, X-ray powder diffraction, IR, Raman and 29Si, 23Na MAS NMR spectroscopy, SEM and thermogravimetry. The crystal structure refinement of pure nitrate cancrinite has been carried out from X-ray data using Rietveld refinement method. Gallosilicate cancrinite Na8[GaSiO4]6(NO34(H2O6 crystalline hexagonal with space group P63 and a = 12.77981 Å (2, c = 5.20217 Å (1, (Rwp = 0.0696 Rp = 0.0527. The results by MAS NMR spectroscopy confirmed the alternating Si, Ga ordering of the gallosilicate framework for a Si/Ga ratio of 1.0. A distribution of the quadrupolar interaction of the sodium cations caused by the enclatherated water molecules and motional effects can be suggested from the 23Na MAS NMR. Thermogravimetric investigation shows the extent of nitrate entrapment, stability within the cancrinite cage and decomposition properties. SEM clearly shows the hexagonal needle shaped crystals of nitrate cancrinite.

  7. Resonant inelastic X-ray scattering spectra at the Ir L-edge in Na{sub 2}IrO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Igarashi, Jun-ichi, E-mail: junichi.igarashi.kiryu@vc.ibaraki.ac.jp [Faculty of Science, Ibaraki University, Mito, Ibaraki 310-8512 (Japan); Nagao, Tatsuya, E-mail: nagao@gunma-u.ac.jp [Faculty of Engineering, Gunma University, Kiryu, Gunma 376-8515 (Japan)

    2016-10-15

    Highlights: • A theoretical framework of resonant inelastic X-ray scattering (RIXS) on the basis of the itinerant electron scheme has been developed. • The RIXS theory is applied to iridate Na{sub 2}IrO{sub 3}. • The origins of the multi-peak structure of the excitation spectra found in the RIXS experiment have been assigned to the magnetic and excitonic excitations. - Abstract: We analyze resonant X-ray scattering (RIXS) spectra in Na{sub 2}IrO{sub 3} on the basis of the itinerant electron picture. Employing a multi-orbital tight-binding model on a honeycomb lattice, we find that the zigzag magnetic order is the most stable with sizable energy gap in the one-electron band within the Hartree–Fock approximation. We derive the RIXS spectra, which are connected to the generalized density–density correlation function. We calculate the spectra as a function of excitation energy ω, within the random phase approximation. The spectra consist of the peaks with ω < 20 meV, and of the peaks with 0.4 < ω < 0.8 eV. The former peaks are composed of four bound states in the density–density correlation function, and may be identified as the magnetic excitations, while the latter peaks are composed of 16 bound states below the energy continuum of individual electron–hole pair excitations, and may be identified as the excitonic excitations. The calculated spectra agree qualitatively with the recent RIXS experiment.

  8. Os discursos socioculturais na internet sobre a legalização da Cannabis sativa

    OpenAIRE

    Costa Junior, Achylles de Oliveira

    2013-01-01

    Este estudo, realizado a partir da percepção da existência de um discurso favorável à legalização do uso medicinal e recreativo da Cannabis sativa, nas atividades jornalísticas e culturais, produzido em uma nova ambiência semiótica que se articula com diversos campos do saber, como os da medicina, da antropologia, do direito, da indústria, da moda e das artes; procura compreender como os discursos antiproibicionistas foram historicamente restritos às bordas dos sistemas de comunicação, e d...

  9. FECHAMENTO DA PAREDE ABDOMINAL COM AFASTAMENTO PARCIAL DAS BORDAS DA APONEUROSE UTILIZANDO SOBREPOSIÇÃO COM TELAS DE VICRYL OU MARLEX EM RATOS

    Directory of Open Access Journals (Sweden)

    Mazzini Décio Luiz

    1999-01-01

    Full Text Available O presente experimento tem por finalidade estudar o efeito da aplicação de telas absorvíveis e inabsorvíveis, como reforço no fechamento de incisões medianas abdominais em ratos, na situação de aproximação parcial das bordas das aponeuroses. Para isto, foram estudados 45 ratos machos da raça Wistar, divididos em três grupos, nos quais se procedeu da seguinte maneira: Grupo "controle" - incisão mediana abdominal atingindo a cavidade peritoneal, seguida por fechamento apenas da pele; Grupo "vicryl" - incisão mediana abdominal atingindo a cavidade peritoneal, seguida por reforço com tela de vicryl, sobreposta em forma de ponte sobre a aponeurose, mantendo os lábios da aponeurose distantes entre si por 1,0 cm; Grupo "marlex" - procedimento idêntico ao grupo "vicryl", substituindo-se a tela de vicryl por marlex. Após um ano, os animais foram sacrificados e submetidos à avaliação macroscópica quanto à presença de hérnias e aderências às telas; aferição da resistência tênsil da cicatriz cirúrgica através da tração por dinamômetro e estudo histológico dos seguintes fenômenos da cicatrização: reação inflamatória crônica, inflamação granulomatosa tipo corpo estranho, tecido de granulação, hiperplasia fibroblástica e fibrose. Apenas os animais do grupo "controle" desenvolveram hérnias ao final do experimento. Não houve formação de aderências intestinais significativas em nenhum dos grupos estudados. A resistência tênsil foi significativamente maior nos animais em que se aplicaram telas para reforço. A reação inflamatória crônica e a inflamação granulomatosa tipo corpo estranho foram muito mais intensas no grupo em que se utilizou marlex, que nos demais grupos. Quanto ao tecido de granulação e hiperplasia fibroblástica, estavam ausentes em todos os grupos. A fibrose foi mais intensa nos grupos em que as telas foram empregadas. Conclui-se que a utilização de telas nesta situação evita o

  10. Massa do gás e das estrelas em aglomerados: eficiência da formação estelar

    Science.gov (United States)

    Laganá, T. F.; Lima Neto, G. B.

    2003-08-01

    Os aglomerados de galáxias apresentam um interesse especial para a cosmologia observacional. Eles são as maiores estruturas ligadas pela gravitação no Universo e relaxadas na região central. A comparação entre a massa do gás intra-aglomerado (responsável por ~25% da massa total, inferida a partir de observações em raios-X), a massa contida nas estrelas (i.e., nas galáxias) e a massa total (incluindo a matéria escura não bariônica), nos dá informações importantes sobre os processos de formação e evolução de aglomerados. Por exemplo, a razão entre a massa do gás e a massa total é uma medida da fração de bárions no Universo (razão entre a matéria bariônica e matéria escura) e, utilizando a densidade de bárions predita pela nucleosíntese primordial, podemos deduzir a densidade de matéria escura no Universo (cf. White et al. 1993). O objetivo deste trabalho é obter as razões entre as massas do gás, estelar (contida nas galáxias), e a total (massa dinâmica). As massas do gás e total são obtidas a partir das análises fotométrica e espectroscópica em raios-X enquanto que a massa estelar é obtida pela análise fotométrica das galáxias. Esta análise foi aplicada ao aglomerado Abell 496 observado pelo satélite XMM-Newton. A massa contida nas galáxias foi estimada a partir da função de luminosidade obtida por Durret et al. (2002). Para determinar as massas dinâmica e do gás nos precisamos determinar os perfis radiais de densidade e temperatura. Nós apresentaremos aqui estes resultados e suas implicações na eficiência da formação estelar em Abell 496.

  11. URBANIDADE, PRODUÇÃO AGRÍCOLA E CONSERVAÇÃO AMBIENTAL – ESTUDO DE CASO NA REGIÃO DO VALE DO TAQUARI/RS/BRASIL

    Directory of Open Access Journals (Sweden)

    Claudete Rempel

    2015-02-01

    Full Text Available O processo de urbanidade e a prática agrícola convencional ocorrem onstantemente, modificando as condições do ambiente natural e transformando áreas vegetadas contínuas em fragmentos florestais. O objetivo deste estudo foi verificar a existência de relação entre a densidade populacional, o uso e cobertura da terra e os hotspots e firepoints existentes na região do Vale do Taquari - RS. Para tanto, foram gerados mapas de densidade populacional e de zoneamento ecológico econômico com áreas indicadas para conservação. Por meio da análise dos resultados, discutiu-se a melhor forma de conservar e ao mesmo tempo produzir. Além das alternativas trazidas pela agroecologia, sugere-se que as áreas aptas para a produção sejam melhor exploradas, enquanto que as regiões com restrições mantenham áreas mais extensas e conservadas. Fragmentos diminutos, apesar de servirem como ilhas conectivas, não cumprem a mesma função ambiental que fragmentos extensos, principalmente devido à influência de borda que sofrem.

  12. CONTRIBUIÇÃO AO ESTUDO TECNOLÓGICO DA CANELA-AZEITONA, Rapanea ferruginea (Ruiz e Pav. Mez, UMA ESPÉCIE PIONEIRA. I - CARACTERÍSTICAS ANATÔMICAS DA MADEIRA

    Directory of Open Access Journals (Sweden)

    Ana Paula Texeira do Carmo

    1993-12-01

    Full Text Available São descritos neste trabalho os aspectos anatômicos da madeira de Rapanea ferruginea (Ruiz et Pav. Mez. Apresentam-se dados quantitativos de 11 caracteres do xilema secundário, bem como fotomicrografias das estruturas anatômicas da madeira. Os raios largos e a largos e a baixa percentagem de parênquima axial são os caracteres mais importantes na estrutura do lenho.

  13. AqSo_NaCl: Computer program to calculate p-T-V-x properties in the H2O-NaCl fluid system applied to fluid inclusion research and pore fluid calculation

    Science.gov (United States)

    Bakker, Ronald J.

    2018-06-01

    The program AqSo_NaCl has been developed to calculate pressure - molar volume - temperature - composition (p-V-T-x) properties, enthalpy, and heat capacity of the binary H2O-NaCl system. The algorithms are designed in BASIC within the Xojo programming environment, and can be operated as stand-alone project with Macintosh-, Windows-, and Unix-based operating systems. A series of ten self-instructive interfaces (modules) are developed to calculate fluid inclusion properties and pore fluid properties. The modules may be used to calculate properties of pure NaCl, the halite-liquidus, the halite-vapourus, dew-point and bubble-point curves (liquid-vapour), critical point, and SLV solid-liquid-vapour curves at temperatures above 0.1 °C (with halite) and below 0.1 °C (with ice or hydrohalite). Isochores of homogeneous fluids and unmixed fluids in a closed system can be calculated and exported to a.txt file. Isochores calculated for fluid inclusions can be corrected according to the volumetric properties of quartz. Microthermometric data, i.e. dissolution temperatures and homogenization temperatures, can be used to calculated bulk fluid properties of fluid inclusions. Alternatively, in the absence of total homogenization temperature the volume fraction of the liquid phase in fluid inclusions can be used to obtain bulk properties.

  14. Review on Material Synthesis and Characterization of Sodium (Na) Super-Ionic Conductor (NASICON)

    Science.gov (United States)

    Kimpa, M. I.; Mayzan, M. Z. H.; Yabagi, J. A.; Nmaya, M. M.; Isah, K. U.; Agam, M. A.

    2018-04-01

    Sodium (Na) Super Ionic Conductor (NASICON) has general formula Na1+ x Zr2P3- xSi x O12 (0 ≤x ≤ 3) derived from its parent compound, sodium zirconium phosphate NaZr2(PO4)3 (NZP) which belong to a rhombohedral crystal structure. This material consists of three-dimensional structure with interesting features such as low thermal expansion coefficient, thermal stability, gas sensor and nuclear waste immobilization that make it viable for industrial applications. Current study presents comprehensive studies on the synthesis and essential characteristics required to understand the theory behind the mechanism that justifies the study of NASICON structure and its application such as lithium ion rechargeable battery, gas sensor, and nuclear waste immobilization and so on.

  15. Aspectos morfológicos da utilização intraperitoneal de prótese de dupla face na inguinoplastia em cães

    Directory of Open Access Journals (Sweden)

    Luiz Carlos de Andrade

    Full Text Available OBJETIVO: Avaliar os aspectos morfológicos do comportamento de prótese de dupla face aplicada em inguinoplastia laparotômica em cães, com fixação intraperitoneal com a face de látex voltada às vísceras. MÉTODOS: Vinte cães distribuídos em dois grupos (n=10 foram submetidos à laparotomia infraumbilical com fixação da prótese de dupla face em uma região inguinal e de uma prótese controle de polipropileno contralateral. Foram pesquisados no 14° e 28° dia de pós-operatório achados macroscópicos referentes à obstrução e fístula intestinais, encistamento, incorporação e aderências. A análise microscópica envolveu o processo inflamatório e reparador. RESULTADOS: Não ocorreram processos infecciosos, obstrução ou fístula intestinal. As próteses apresentaram boa acomodação e incorporação. As aderências ocorreram em maior prevalência e intensidade com a prótese de polipropileno (p0,05. CONCLUSÃO: A prótese de dupla face na sua face parietal soma as vantagens do potencial de incorporação aos tecidos observados com o polipropileno às de biocompatibilidade do látex na sua face visceral. A pequena distância entre o disco de polipropileno e a borda da prótese de dupla face (2 cm aliada à sua fixação com apenas cinco grampos é insuficiente para evitar que o epíploon migre em direção ao processo inflamatório desencadeado pelo polipropileno na face parietal.

  16. Collisional energy transfer in Na(4p--3d)--He,H2 collisions

    International Nuclear Information System (INIS)

    Kleiber, P.D.; Wong, T.H.; Bililign, S.

    1993-01-01

    We have investigated the direct collisional energy transfer process Na*(4p)+M→Na*(3d)+M, where M=He,H 2 under gas cell conditions. We have measured the temporal profiles of the Na(3d--3p) sensitized fluorescence as a function of quenching gas pressure and fit the profiles to a two-state rate equation model to obtain the quenching rate coefficients from the Na*(4p) state. The total energy transfer rate coefficient out of the 4p state for He is small [(0.5±0.2)x10 -10 cm 3 /s]. The total quenching rate coefficient out of the 4p state is much larger for H 2 [(3.9±0.5)x10 -10 cm 3 /s]. Evidence suggests that the energy transfer rate coefficient for the 4p--3d process is ∼2.0x10 -10 cm 3 /s with the remainder of the 4p quenching being predominantly reactive. We also compare the far-red wing absorption line shapes for the NaHe and NaH 2 systems

  17. Studies of the local distortions and the EPR parameters for Cu{sup 2+} in xLi{sub 2}O-(30-x)Na{sub 2}O-69.5B{sub 2}O glasses

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Chang-Chun; Wu, Shao-Yi; Kuang, Min-Quan; Hu, Xian-Fen; Li, Guo-Liang [Univ. of Electronic Science and Technology of China, Chengdu (China). Dept. of Applied Physics

    2016-07-01

    The local distortions and electron paramagnetic resonance (EPR) parameters for Cu2+ in lithium sodium borate (LNB) glasses xLi{sub 2}O.(30-x).Na{sub 2}O.69.5B{sub 2}O{sub 3} (5 ≤ x ≤ 25 mol%) are theoretically studied at various concentrations x in a consistent way. Owing to the Jahn-Teller effect, the [CuO{sub 6}]{sup 10-} clusters are found to experience the significant tetragonal elongations of 16% along C{sub 4} axis. Despite the nearly unchanging observed g factors, measured d-d transition band (or cubic field parameter Dq) shows remarkable linear increases with concentration x, whose influences on g {sub parallel} and g {sub perpendicular} {sub to} are actually cancelled by the linearly increasing covalency factor N and relative elongation ratio η with x. The almost unvarying hyperfine structure constants are attributed to the fact that the influences of the linearly increasing N and the linearly decreasing core polarisation constant κ largely cancel one another. The microscopic mechanisms of the above concentration dependences for these quantities are illustrated from mixed alkali effect (modification of B{sub 2}O{sub 3} network by transforming some BO{sub 3} units into BO{sub 4} ones with variations in modifier Li{sub 2}O concentration).

  18. β-delayed γ decay of 20Mg and the 19Ne(p , γ) 20 Na breakout reaction in Type I X-ray bursts

    Science.gov (United States)

    Glassman, B. E.; Pérez-Loureiro, D.; Wrede, C.; Allen, J.; Bardayan, D. W.; Bennett, M. B.; Brown, B. A.; Chipps, K. A.; Febbraro, M.; Friedman, M.; Fry, C.; Hall, M. R.; Hall, O.; Liddick, S. N.; O'Malley, P.; Ong, W. J.; Pain, S. D.; Prokop, C.; Schwartz, S. B.; Shidling, P.; Sims, H.; Thompson, P.; Zhang, H.

    2018-03-01

    Certain astrophysical environments such as thermonuclear outbursts on accreting neutron stars (Type-I X-ray bursts) are hot enough to allow for breakout from the Hot CNO hydrogen burning cycles to the rapid proton capture (rp) process. An important breakout reaction sequence is 15O(α,γ)19Ne(p,γ)20Na and the 19Ne(p,γ)20Na reaction rate is expected to be dominated by a single resonance at 457 keV above the proton threshold in 20Na. The resonance strength and, hence, reaction rate depends strongly on whether this 20Na state at an excitation energy of 2647 keV has spin and parity of 1+ or 3+. Previous 20Mg (Jπ =0+) β+ decay experiments have relied almost entirely on searches for β-delayed proton emission from this resonance in 20Na to limit the log ft value and, hence, Jπ. However there is a non-negligible γ-ray branch expected that must also be limited experimentally to determine the log ft value and constrain Jπ. We have measured the β-delayed γ decay of 20Mg to complement previous β-delayed proton decay work and provide the first complete limit based on all energetically allowed decay channels through the 2647 keV state. Our limit confirms that a 1+ assignment for this state is highly unlikely.

  19. Characterization of CuCl quantum dots grown in NaCl single crystals via optical measurements, X-ray diffraction, and transmission electron microscopy

    Science.gov (United States)

    Miyajima, Kensuke; Akatsu, Tatsuro; Itoh, Ken

    2018-05-01

    We evaluated the crystal size, shape, and alignment of the lattice planes of CuCl quantum dots (QDs) embedded in NaCl single crystals by optical measurements, X-ray diffraction (XRD) patterns, and transmission electron microscopy (TEM). We obtained, for the first time, an XRD pattern and TEM images for CuCl QDs in NaCl crystals. The XRD pattern showed that the lattice planes of the CuCl QDs were parallel to those of the NaCl crystals. In addition, the size of the QDs was estimated from the diffraction width. It was apparent from the TEM images that almost all CuCl QDs were polygonal, although some cubic QDs were present. The mean size and size distribution of the QDs were also obtained. The dot size obtained from optical measurements, XRD, and TEM image were almost consistent. Our new findings can help to reveal the growth mechanism of semiconductor QDs embedded in a crystallite matrix. In addition, this work will play an important role in progressing the study of optical phenomena originating from assembled semiconductor QDs.

  20. Caracterização química e mineralogia de solos antrópicos (terras pretas de índio na amazônia central

    Directory of Open Access Journals (Sweden)

    Francisco Weliton Rocha Silva

    2011-06-01

    Full Text Available Na Amazônia brasileira é comum a ocorrência de sítios arqueológicos. Frequentemente, observa-se que as ações humanas nesses sítios promoveram modificações significativas em muitas das características físicas, morfológicas e químicas dos solos desses ambientes, tornando-os muito diferentes dos solos adjacentes, especialmente nas áreas de terra firme da região. Embora muitos estudos tenham sido conduzidos visando compreender a magnitude dessas modificações e seus reflexos na gênese dos solos influenciados, muitas questões precisam ser mais bem compreendidas, sobretudo as relacionadas com a mineralogia desses solos. Este estudo teve como objetivo avaliar as características químicas, a composição mineralógica das frações argila e areia e o grau de pedogênese de cinco perfis de solos com horizonte A antrópico (Au, em ambientes de terra firme e várzea, localizados na Bacia Sedimentar do Amazonas, entre Coari e Manaus-AM. Amostras de solos foram coletadas, preparadas e submetidas às análises químicas de rotina e caracterizadas quanto aos teores de carbono oxidável e aos teores de Si, Fe, Al e P; adicionalmente, efetuou-se a identificação dos minerais presentes nas frações argila e areia, por meio de difratometria de raios X. Os resultados mostraram que as modificações promovidas pela atividade humana levaram à melhoria da fertilidade do solo, resultando em solos com acidez moderada, elevados teores de Ca2+ e de P disponíveis e baixos teores de Al3+ trocável. Esses resultados também revelaram teores muito elevados de P-total nos horizontes antrópicos, variando entre 1.630 e 8.840 mg kg-1 de P2O5. A mineralogia da fração argila dos solos antrópicos de terra firme revelou dominância de caulinita, além da ocorrência de gibbsita, de goethita e de óxidos de titânio (anatásio. O perfil de várzea, além de caulinita e goethita, apresentou também minerais do tipo 2:1 na fração argila. A mineralogia da

  1. Design and implementation of the NaI(Tl)/CsI(Na) detectors output signal generator

    Science.gov (United States)

    Zhou, Xu; Liu, Cong-Zhan; Zhao, Jian-Ling; Zhang, Fei; Zhang, Yi-Fei; Li, Zheng-Wei; Zhang, Shuo; Li, Xu-Fang; Lu, Xue-Feng; Xu, Zhen-Ling; Lu, Fang-Jun

    2014-02-01

    We designed and implemented a signal generator that can simulate the output of the NaI(Tl)/CsI(Na) detectors' pre-amplifier onboard the Hard X-ray Modulation Telescope (HXMT). Using the development of the FPGA (Field Programmable Gate Array) with VHDL language and adding a random constituent, we have finally produced the double exponential random pulse signal generator. The statistical distribution of the signal amplitude is programmable. The occurrence time intervals of the adjacent signals contain negative exponential distribution statistically.

  2. Ax(H3O)2-xMn5(HPO3)6 (A = Li, Na, K and NH4): open-framework manganese(ii) phosphites templated by mixed cationic species.

    Science.gov (United States)

    Orive, Joseba; Fernández de Luis, Roberto; Fernández, Jesús Rodríguez; Lezama, Luis; Arriortua, María I

    2016-07-26

    Ax(H3O)2-xMn5(HPO3)6 (A = Li, x = 0.55 (1-Li); A = Na, x = 0.72 (2-Na); A = K, x = 0.30 (3-K); A = NH4, x = 0.59 (4-NH4)) phases were synthesized by employing mild hydrothermal conditions. 1-Li was studied by single crystal X-ray diffraction, while sodium, potassium and ammonium containing analogues were obtained as polycrystalline samples and characterized by powder X-ray diffraction. The four compounds were characterized by ICP-Q-MS, thermal analysis and XPS, IR, UV/Vis and EPR spectroscopy. Single crystal data indicate that 1-Li crystallizes in the P3[combining macron]c1 space group with lattice parameters a = 10.3764(1) Å and c = 9.4017(1) Å with Z = 2. The crystal structure of these phases is constituted by a three-dimensional [Mn(ii)5(HPO3)6](2-) anionic skeleton templated by alkali metal and ammonium cations together with protonated water molecules. Such an inorganic framework is formed by layers of edge-sharing MnO6 octahedra placed in the ab plane and joined along the c direction through phosphite pseudotetrahedra. The sheets display 12-membered ring channels parallel to the c-axis, ca. 5 Å in diameter, where the extraframework species display a strong disorder. EPR measurements point to the existence of short range ferromagnetic interactions around 12 K. Magnetic susceptibility and heat capacity measurements show that all the compounds exhibit long range antiferromagnetic order below circa 4 K, with a significant magnetocaloric effect around the Neel temperature.

  3. The NA62 GigaTracker

    CERN Document Server

    Perrin-Terrin, Mathieu

    2015-01-01

    The GigaTracker is an hybrid silicon pixel detector built for the NA62 experiment aiming at measuring the branching fraction of the ultra-rare kaon decay K + ! p + n ̄ n at the CERN SPS. The detector has to track particles in a beam with a flux reaching 1.3 MHz/mm 2 and provide single-hit timing with 200ps RMS resolution for a total material budget of less than 1.5 X 0 . The tracker comprises three 60.8mm 27mm stations installed in vacuum ( 10$^{-6}$ mbar) and cooled with liquid C 6 F 14 circulating through micro-channels etched inside few hundred of microns thick silicon plates. Each station is composed of a 200 m m thick silicon sensor readout by 2 x 5 cus- tom 100 m m thick ASIC, called TDCPix. Each chip contains 40 x 45 asynchronous pixels, each 300 m m x 300 m m and is instrumented with 100ps bin time-to-digital converters. In order to cope with the high rate, the TDCPix is equipped with four 3.2Gb/s serialisers sending out the data. We will describe the detector and the results from the 2014 NA62 ru...

  4. NA64 Status Report 2018

    CERN Document Server

    Gninenko, Sergei

    2018-01-01

    The experiment NA64 is aimed at a search for a sub-GeV vector mediator (called dark photon A′) of Dark Matter production at the CERN SPS. . The main goal in 2017 was to probe a region of the A′ parameter space of the thermal dark matter model. Ongoing activities on the detector and data analysis are reviewed. The status and results from the NA64 runs in 2016 and 2017 are reported. First results on the search for the X->e+e− decay of a 17 MeV X boson, which could explain the recently observed excess of e+e-pairs from the excited 8Be nucleus transitions, and A'-> e+e- decays are also presented. Ongoing analysis on the decays of axion-like particles and plans for further searches beyond LS2 are also discussed.

  5. XRD (X-Ray Diffraction) and nitrogen adsorption characterization of Ni-Pt/mordenite catalysts; Caracterizacao por EDX (Espectrometria de Raios-X), DRX (Difracao de Raios-X) e adsorcao de nitrogenio de catalisadores Ni/Pt/mordenita visando sua aplicacao na isomerizacao de n-hexano

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Geovana do Socorro V.; Sousa, Bianca V.; Rodrigues, Meiry Glaucia F. [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

    2008-07-01

    The search for molecules of high octane arose great interest in the isomerization processes. Catalysts to the zeolite base have been wide developed for the n-paraffins isomerization. In this work, bimetallic bifunctional catalysts supported on Mordenite zeolite were prepared samples containing 60Pt40Ni (wt.%) metal (Pt). The catalysts were obtained by competitive ion exchange using aqueous solutions of [Pt(NH{sub 3}){sub 4}]Cl{sub 2} and Ni(NH{sub 3}){sub 6}]Cl{sub 2} complexes. The EDS characterization analyses showed incorporation of the nickel and platinum mordenite zeolite. The diffractograms showed competitive ion exchange and calcination processes did not provoke appreciable changes in the zeolitic support framework. The peaks attributed to nickel and platinum oxides was possible to observe in the bimetallic catalysts 60Ni40Pt/MOR. The results of the N{sub 2} physical adsorption of the 60Ni40Pt/MOR showed that it did not have modification in the superficial area of the catalysts. (author)

  6. Li3-xNaxV2(PO4)3 (0≤x≤3): Possible anode materials for rechargeable lithium-ion batteries

    International Nuclear Information System (INIS)

    Wang, Pengfei; Shao, Lianyi; Qian, Shangshu; Yi, Ting-Feng; Yu, Haoxiang; Yan, Lei; Li, Peng; Lin, Xiaoting; Shui, Miao; Shu, Jie

    2016-01-01

    Highlights: • Li 3-x Na x V 2 (PO 4 ) 3 (0 ≤ x ≤ 3) series are firstly evaluated as anode materials. • Li 3-x Na x V 2 (PO 4 ) 3 anodes show lithium storage activity in 1.0–3.0 V. • The lithium storage capability of different Li 3-x Na x V 2 (PO 4 ) 3 is compared. • Structural reversibility of Li 3-x Na x V 2 (PO 4 ) 3 is studied by in-situ XRD. - Abstract: In this paper, a series of Li 3-x Na x V 2 (PO 4 ) 3 (0 ≤ x ≤ 3) are prepared by a solid state reaction and systematically evaluated as anode materials for lithium-ion batteries. Structural analysis shows that the phase structure of Li 3-x Na x V 2 (PO 4 ) 3 changes along with the evolution of Na content. Charge-discharge tests exhibit that Li 3 V 2 (PO 4 ) 3 shows the highest initial charge specific capacity as high as 88.3 mAh g −1 among all the seven samples, and the reversible capacity is kept at 68.3 mAh g −1 after 45 cycles, corresponding to 77.3% of the initial charge capacity. With increasing of Na content in Li 3-x Na x V 2 (PO 4 ) 3 , the as-obtained sample show poorer lithium storage capability than Li 3 V 2 (PO 4 ) 3 . As a result, Na 3 V 2 (PO 4 ) 3 shows the inferior cycling performance than other Li 3-x Na x V 2 (PO 4 ) 3 . It can only deliver a reversible capacity of 20.9 mAh g −1 after 45 cycles, corresponding to 45.9% of the initial charge capacity. In-situ X-ray diffraction observations demonstrate that the poor electrochemical property of Na 3 V 2 (PO 4 ) 3 anode is due to the irreversible structural evolution during charge-discharge process. Therefore, reducing the Na 3 V 2 (PO 4 ) 3 phase in as-obtained sample is a feasible route to improve the lithium storage capability of Li 3-x Na x V 2 (PO 4 ) 3 .

  7. Synthesis, crystal structure and electrochemical properties of the manganese-doped LiNaFe[PO{sub 4}]F materials

    Energy Technology Data Exchange (ETDEWEB)

    Ben Yahia, Hamdi, E-mail: benyahia.hamdi@aist.go.jp; Shikano, Masahiro, E-mail: shikano.masahiro@aist.go.jp; Sakaebe, Hikari; Kobayashi, Hironori

    2013-08-15

    The new compounds LiNaFe{sub 1−x}Mn{sub x}[PO{sub 4}]F (x ≤ 1/4) were synthesized by a solid state reaction route. The crystal structure of LiNaFe{sub 3/4}Mn{sub 1/4}[PO{sub 4}]F was determined from single crystal X-ray diffraction data. LiNaFe{sub 3/4}Mn{sub 1/4}[PO{sub 4}]F crystallizes with the Li{sub 2}Ni[PO{sub 4}]F-type structure, space group Pnma, a = 10.9719(13), b = 6.3528(7), c = 11.4532(13) Å, V = 798.31(16) Å{sup 3}, and Z = 8. The structure consists of edge-sharing (Fe{sub 3/4}Mn{sub 1/4})O{sub 4}F{sub 2} octahedra forming (Fe{sub 3/4}Mn{sub 1/4})FO{sub 3} chains running along the b-axis. These chains are interlinked by PO{sub 4} tetrahedra forming a three-dimensional framework with the tunnels and the cavities filled by the well-ordered sodium and lithium atoms, respectively. The manganese-doped phases show poor electrochemical behavior comparing to the iron pure phase LiNaFe[PO{sub 4}]F. - Highlights: • We investigated the synthesis of LiNaFe{sub 1−x}Mn{sub x}[PO{sub 4}]F by solid state reaction. • We demonstrated that a solid solution exist only for x ≤ 1/4. • We solved the crystal structure of LiNaFe{sub 3/4}Mn{sub 1/4}[PO{sub 4}]F using single crystal data. • We studied the electrochemical performances of LiNaFe{sub 1−x}Mn{sub x}[PO{sub 4}]F. • The Mn-doped phases have poor electrochemical performances comparing to LiNaFe[PO{sub 4}]F.

  8. Effects of Na2WO4 and Na2SiO3 additives in electrolytes on microstructure and properties of PEO coatings on Q235 carbon steel

    International Nuclear Information System (INIS)

    Wang Yunlong; Jiang Zhaohua; Yao Zhongping

    2009-01-01

    Ceramic coatings were achieved on Q235 carbon steel by plasma electrolytic oxidation in aluminate system with and without Na 2 WO 4 and Na 2 SiO 3 additives in electrolyte. Influence of Na 2 WO 4 and Na 2 SiO 3 on surface morphology, phase and elemental composition of PEO coatings were examined by means of scanning electron microscope (SEM), thin-film X-ray diffraction (TF-XRD) and energy dispersive X-ray spectroscopy (EDS). Effects of the two additives on the properties of the coatings including surface roughness, surface micro hardness and friction coefficient were studied. The results showed that W from Na 2 WO 4 and Si from Na 2 SiO 3 in electrolytes entered into the coatings. Na 2 WO 4 additive had no evident effect on phase composition of the coating, while Na 2 SiO 3 additive resulted in the coating changing from crystalline state to amorphous state and increased the content of P in the coating. Both additives reduced the surface roughness of the coatings. With Na 2 WO 4 or Na 2 SiO 3 into the electrolytes, the surface micro hardness of the coating was enhanced to 1433 and 1478, respectively, and the friction coefficients were also decreased to below 0.1.

  9. Densidade de um planossolo sob sistemas de cultivo avaliada por meio da tomografia computadorizada de raios gama Bulk density of an alfisol under cultivation systems in a long-term experiment evaluated with gamma ray computed tomography

    Directory of Open Access Journals (Sweden)

    Adilson Luís Bamberg

    2009-10-01

    Full Text Available A sustentabilidade do arroz (Oryza sativa L. irrigado em solos de várzea está alicerçada na utilização da rotação e sucessão de culturas, fundamentais para o controle do arroz-vermelho e preto. Os reflexos sobre os atributos dos solos de várzea merecem estudos em especial sobre a compactação do solo. O objetivo deste trabalho foi identificar camadas compactadas em Planossolo submetido a diferentes sistemas de cultivo e preparo, avaliando-se a densidade do solo (Ds pela Tomografia Computadorizada de Raios Gama (TC. A análise foi realizada em um experimento de longa duração, conduzido de 1985 a 2004, na Estação Experimental da Embrapa Clima Temperado, Capão do Leão, RS, num delineamento experimental em blocos ao acaso, com sete tratamentos, cada um com quatro repetições (T1 - um ano de arroz com preparo convencional do solo seguido de dois anos de pousio; T2 - cultivo contínuo de arroz com preparo convencional do solo; T4 - rotação de arroz e soja (Glycine max L. com preparo convencional do solo; T5 - rotação de arroz, soja e milho (Zea maiz L. em preparo convencional do solo; T6 - plantio direto de arroz no verão em sucessão do azevém (Lolium multiflorum L. no inverno; T7 - rotação de arroz sob plantio direto e soja sob preparo convencional do solo; T8 - testemunha: solo sem cultivo. A Tomografia Computadorizada de Raios Gama permitiu detectar que o plantio direto de arroz no verão em sucessão do azevém no inverno não resultou na formação de camadas compactadas; a utilização de dois anos de pousio, no sistema de produção de arroz irrigado, não foi suficiente para evitar a formação de uma camada superficial compactada; e a rotação de arroz, soja e milho com preparo convencional do solo apresentou duas camadas compactadas (0,0 a 1,5 cm e 11 a 14 cm, indicando que essas podem limitar a produção agrícola nesse sistema de produção em Planossolos.The sustainability of irrigated rice (Oryza sativa L. in

  10. Electrochemical Behavior of Sn-9Zn- xTi Lead-Free Solders in Neutral 0.5M NaCl Solution

    Science.gov (United States)

    Wang, Zhenghong; Chen, Chuantong; Jiu, Jinting; Nagao, Shijo; Nogi, Masaya; Koga, Hirotaka; Zhang, Hao; Zhang, Gong; Suganuma, Katsuaki

    2018-05-01

    Electrochemical techniques were employed to study the electrochemical corrosion behavior of Sn-9Zn- xTi ( x = 0, 0.05, 0.1, 0.2 wt.%) lead-free solders in neutral 0.5M NaCl solution, aiming to figure out the effect of Ti content on the corrosion properties of Sn-9Zn, providing information for the composition design of Sn-Zn-based lead-free solders from the perspective of corrosion. EIS results reveal that Ti addition was involved in the corrosion product layer and changed electrochemical interface behavior from charge transfer control process to diffusion control process. The trace amount of Ti addition (0.05 wt.%) can refine the microstructure and improve the corrosion resistance of Sn-9Zn solder, evidenced by much lower corrosion current density ( i corr) and much higher total resistance ( R t). Excess Ti addition (over 0.1 wt.%) led to the formation of Ti-containing IMCs, which were confirmed as Sn3Ti2 and Sn5Ti6, deteriorating the corrosion resistance of Sn-9Zn- xTi solders. The main corrosion products were confirmed as Sn3O(OH)2Cl2 mixed with small amount of chlorine/oxide Sn compounds.

  11. Crystal structure of alluaudite-type Na4Co(MoO4)3.

    Science.gov (United States)

    Nasri, Rawia; Fakhar Bourguiba, Noura; Zid, Mohamed Faouzi; Driss, Ahmed

    2014-09-01

    The title compound, tetra-sodium cobalt(II) tris-[molyb-date(IV)], was prepared by solid-state reactions. The structure is isotypic with Na3In2(AsO4)3 and Na3In2(PO4)3. The main structural feature is the presence of infinite chains of edge-sharing X 2O10 (X = Co/Na) dimers, which are linked by MoO4 tetra-hedra, forming a three-dimensional framework enclosing two types of hexa-gonal tunnels in which Na(+) cations reside. In this alluaudite structure, Co and Na atoms are located at the same general site with occupancies of 0.503 (5) and 0.497 (6), respectively. The other three Na and one of the two Mo atoms lie on special positions (site symmetries 2, -1, 2 and 2, respectively). The structure is compared with similar structures and other members of alluaudite family.

  12. Nanocompósitos de polietileno/argila bentonita nacional: influência da argila e do agente compatibilizante PE-g-MA nas propriedades mecânicas e de inflamabilidade Polyethylene/national bentonite clay nanocomposites: influence of clay and PE-g-MA coupling agent on the mechanical properties and flammability

    Directory of Open Access Journals (Sweden)

    Gustavo F. Brito

    2008-06-01

    Full Text Available Nanocompósitos de polietileno de alta densidade/argila bentonita nacional foram preparados por intercalação por fusão. A influência da adição da argila sem tratamento e da argila tratada com o sal quaternário de amônio Cetremide e do polietileno graftizado com anidrido maléico (PE-g-MA como agente compatibilizante foi avaliada. Os sistemas obtidos foram caracterizados por inflamabilidade, propriedades mecânicas e reológicas, difração de raios X e microscopia eletrônica de transmissão. Os resultados de difração de raios X e microscopia eletrônica de transmissão indicaram a obtenção de nanocompósitos com estruturas parcialmente esfoliadas e/ou intercaladas que conduziram ao aumento do módulo de elasticidade e do valor do torque. O teste de inflamabilidade mostrou que a adição da argila na matriz polimérica e a presença do PE-g-MA retardaram a velocidade de queima do sistema, ou seja, diminuíram a inflamabilidade do PE puro. Em geral, o sistema contendo o agente compatibilizante (PE-g-MA exibiu melhorias na estabilidade térmica e nanocompósitos parcialmente esfoliados foram formados, quando comparados à matriz de polietileno de alta densidade. O polietileno graftizado com anidrido maléico não apenas promoveu a esfoliação da argila, mas também facilitou a adesão carga-matriz, obtendo-se com isso melhorias nos resultados mecânicos do sistema.High density polyethylene/national bentonite clay nanocomposites were prepared with the melt intercalation technique. The effect of the clay without treatment and clay treated with quaternary ammonium salt Cetremide with polyethylene-graft-maleic anhydride as coupling agent was evaluated. The systems were characterized by flammability, mechanical and rheological properties, X ray diffraction and transmission electron microscopy. In general, the results of X ray diffraction and transmission electron microscopy showed partially exfoliated and/or intercalated structures with

  13. Transformações mineralógicas e cristaloquímicas decorrentes dos ensaios termais em argilas cauliníticas ferruginosas Mineralogical and crystalochemical transformations originated from thermal essays on ferruginous kaolinitic clays

    Directory of Open Access Journals (Sweden)

    M. M. Ferreira

    2012-03-01

    Full Text Available Transformações mineralógicas e cristaloquímicas foram investigadas em amostras de argilas cauliníticas ferruginosas aquecidas a temperaturas de 800, 1000 e 1200 °C. As análises de difração de raios X e térmica diferencial e gravimétrica mostraram ser a caulinita o argilomineral predominante nas amostras naturais. Os resultados da espectroscopia Mössbauer mostraram que o alto conteúdo em Fe (22,5% em peso, determinado por fluorescência de raios X, é relacionado à presença de goethita (18% em peso e hematita (16% em peso. Entretanto um resíduo deste elemento (Fe3+ e Fe2+ foi constatado após a extração do ferro usando solução de ditionito-citrato-bicarbonato, e possivelmente se deve à presença de ferro na estrutura da caulinita. O processo de sinterização mostra uma desestruturação da caulinita, assim como a transformação da goethita em hematita, cujo tamanho dos cristais cresce com o incremento da temperatura. O tamanho do cristal de hematita a 1200 °C é 5 vezes maior do que na amostra natural. A mulita formada a 1000 °C é constituída da solução sólida de Fe2O3, com Al2O3, o que resulta em produto resistente e de maior estabilidade térmica.Mineralogical and crystallochemical transformations of representative ferruginous kaolinitic clay samples were investigated in specimens burned at 800, 1000 and 1200 °C. X-ray diffraction and differential thermal and thermogravimetric analyses showed that kaolinite was the predominant mineral in the raw samples. The Mössbauer spectroscopy results showed that the high iron content (22.5 wt.%, as determined by X-ray fluorescence, is related to the presence of goethite (18 wt.% and hematite (16 wt.%. However, after Fe was extracted using a dithionite-citrate system buffered with sodium bicarbonate, a residue of this element (Fe3+ and Fe2+ was found in the structure of the kaolinite. The sintering process showed the destruction of kaolinite, as well as the transformation of

  14. Assembly of positioner of automated two-dimensional scan coupled to X-ray fluorescence spectrometry; Montagem de posicionador de varredura bidimensional automatizada acoplado a espectrometria de fluorescência de raios-X

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Leonardo Santiago Melgaço

    2011-07-01

    This work describes the design and assembling of a prototype automated positioner two-dimensional scanning coupled to X-ray fluorescence spectrometry. The work aims to achieve a portable and easy to use, device of broad utility in the analysis of samples by X-ray fluorescence area of expertise and research. The two-dimensional scanning of the positioner is by means of two stepper motors controlled by a microcontroller PIC 16F877A, encoder and optical sensors. The user interacts with the XY table through an interface program for the Windows operating system, which communicates with the microcontroller through the serial port. The system of Fluorescence Spectroscopy incorporated into the positioner consists of a system commercially available system from the company AMPTEK, where the primary source of excitation of the sample was a source of {sup 241}Am of 59.5 KeV emissions. Resolution and accuracy of tests were performed in the XY scanning process and reproducibility of the same kit with the fluorescence spectrometry X-ray. Qualitative tests by X-ray fluorescence spectrometry in samples were performed to demonstrate the applicability and versatility of the project. It follows that the prototype illustrates a possible adequately to portable device for X-ray spectrometry of two-dimensional. (author)

  15. {beta}-Delayed proton-decay study of {sup 20}Mg and its implications for the {sup 19}Ne(p,{gamma}){sup 20}Na breakout reaction in X-ray bursts

    Energy Technology Data Exchange (ETDEWEB)

    Wallace, J.P., E-mail: J.P.Wallace@sms.ed.ac.uk [University of Edinburgh, Edinburgh, EH9 3JZ (United Kingdom); Woods, P.J.; Lotay, G. [University of Edinburgh, Edinburgh, EH9 3JZ (United Kingdom); Alharbi, A.; Banu, A. [Cyclotron Institute, Texas A and M University, College Station, TX (United States); David, H.M.; Davinson, T. [University of Edinburgh, Edinburgh, EH9 3JZ (United Kingdom); McCleskey, M.; Roeder, B.T.; Simmons, E.; Spiridon, A.; Trache, L.; Tribble, R.E. [Cyclotron Institute, Texas A and M University, College Station, TX (United States)

    2012-05-30

    Under astrophysical conditions of high temperature and density, such as for example found in X-ray bursts, breakout can occur from the hot CNO cycles into the rapid proton capture process. A key breakout route is via the sequence {sup 15}O({alpha},{gamma}){sup 19}Ne(p,{gamma}){sup 20}Na. The {sup 19}Ne(p,{gamma}){sup 20}Na reaction rate is expected to be dominated by a single resonance at 457(3) keV. The identity of the resonance has been under discussion for a long time, with J{sup {pi}}=1{sup +} and 3{sup +} assignments suggested. In this study of the {beta}-delayed proton decay of {sup 20}Mg we report a new, significantly more stringent, upper limit on the {beta}-decay branch to this state of 0.02% with a confidence level of 90%. This makes a 1{sup +} assignment highly unlikely and favours a 3{sup +} assignment for which no branch is expected to be observed. The 3{sup +} state is predicted to have a significantly higher resonance strength, and to produce a proportionately higher {sup 19}Ne(p,{gamma}){sup 20}Na reaction rate in X-ray burst conditions.

  16. Determination of the absolute second-order rate constant for the reaction Na + O3 → NaO + O2

    International Nuclear Information System (INIS)

    Husain, David; Marshall, Paul; Plane, J.M.C.

    1985-01-01

    The absolute second-order rate constant for the reaction Na + O 3 -> NaO + O 2 (k 1 ) has been determined by time-resolved atomic resonance absorption spectroscopy at lambda = 589 nm [Na(3 2 Psub(j)) 2 Ssub(1/2))] following pulsed irradiation, coupled with monitoring of O 3 by light absorption in the ultra-violet; this yields k 1 (500 K) = 4(+4,-2) x 10 -10 cm 3 molecule -1 s -1 , resolving large differences for various estimates of this important quantity used in modelling the sodium layer in the mesosphere. (author)

  17. Design and implementation of the NaI(Tl)/CsI(Na) detectors output signal generator

    International Nuclear Information System (INIS)

    Zhou Xu; Liu Congzhan; Zhao Jianling

    2014-01-01

    We designed and implemented a signal generator that can simulate the output of the NaI(Tl)/CsI(Na) detectors' pre-amplifier onboard the Hard X-ray Modulation Telescope (HXMT). Using the development of the FPGA (Field Programmable Gate Array) with VHDL language and adding a random constituent, we have finally produced the double exponential random pulse signal generator. The statistical distribution of the signal amplitude is programmable. The occurrence time intervals of the adjacent signals contain negative exponential distribution statistically. (authors)

  18. Methodology for determination of inorganic elements in vitamin supplements by X-ray fluorescence; Metodologia para a determinacao de elementos inorganicos em suplementos vitaminicos por fluorescencia de raios X

    Energy Technology Data Exchange (ETDEWEB)

    Endo, Lucas Y.; Portezan Filho, Otavio; Perreira, Paulo S.; Lopes, Fabio; Appoloni, Carlos R., E-mail: lucas_malkavian@hotmail.co, E-mail: otavio@uel.b, E-mail: parreira@uel.b, E-mail: bonn@uel.b, E-mail: appoloni@uel.b [Universidade Estadual de Londrina (UEL), PR (Brazil). Dept. de Fisica. Lab. de Fisica Nuclear Aplicada; Melquiades, Fabio L., E-mail: fmelquiades@unicentro.b [Universidade Estadual do Centro Oeste, Guarapuava, PR (Brazil). Dept. de Fisica

    2009-07-01

    A methodology is present for qualification of inorganic elements in alimentary supplements, using a portable system of low power X-ray, in the analysis of two commercial products, both found as pills. The PXRF (Portable X-ray Fluorescence) is a X-ray mini tube, Ag filter at tube exit, a Si-Pin semiconductor and a Ag collimator at the detector entry, specific circuitry for this type of system and a microcomputer for the data acquisition and analysis. Samples and standards were diluted in boric acid, and the samples were prepared in a 1:10 rate, and the standards vary of 1:2, 1;5, 1:10. 1:15 and 1:100. Results were obtained for Ca, Ti, Mn, Fe, Cu e Zn, with values varying from 0.14 to 8.45 for the sample A, and from 0.17 to 17.94 for the sample B. The PXRF portable system demonstrated to be a multi elementary analysis tool with high analytical speed, and can be applied in situ no only for quality control but also for monitoring of inspection organism

  19. SINTESE DA FASE SODALITA COM O USO DO CAULIM DA REGIÃO BORBOREMA-SERIDÓ (RN/PB ATIVADO TERMICAMENTE

    Directory of Open Access Journals (Sweden)

    Cássia Guerra Marques Santos

    2012-10-01

    Full Text Available A fase mineral sodalita foi obtida com sucesso a partir de reações hidrotérmicas com o uso de caulim proveniente da região Borborema-Seridó (RN/PB, hidróxido e carbonato de sódio. Desse modo, o caulim, com granulometria menor que 37 μm, foi tratado inicialmente em diferentes temperaturas. A calcinação foi realizada nas temperaturas de 500, 700 e 900°C com o objetivo de formar a metacaulinita. Os produtos calcinados foram submetidos à síntese hidrotermal por 1 e 4h, no qual foram utilizados Na2CO3 e NaOH. De acordo com os resultados, nos caulins calcinados a 700 e 900°C ocorreu a completa transição de fase da caulinita para a metacaulinita e, para a síntese no qual utilizou o caulim calcinado a 700°C ocorreu a formação da fase zeolítica sodalita básica caracterizada por difração de raios X e espectroscopia vibracional no infravermelho que mostrara picos e bandas intensas e definidas indicando maior cristalinidade do material.

  20. ANATOMIA ECOLÓGICA DA MADEIRA DE Blepharocalyx salicifolius (H. B. K. Berg

    Directory of Open Access Journals (Sweden)

    José Newton Cardoso Marchiori

    2005-06-01

    Full Text Available RESUMO O presente trabalho visa à comparação anatômica da madeira da murta Blepharocalyx salicifolius (H. B. K. Berg (Myrtaceae, em duas regiões do Rio Grande do Sul. Foram coletados seis exemplares da espécie; três na região da Serra do Sudeste e os demais nos Campos de Cima da Serra. Qualitativamente, a madeira não revelou diferenças expressivas entre as procedências, exceto pela presença de máculas medulares. Sob o ponto de vista de suas características quantitativas, foram encontradas diferenças importantes na estrutura de vasos, parênquima axial, raios e fibras. As amostras da “Serra do Sudeste” mostraram características xéricas no lenho: poros numerosos e pequenos, além de elementos vasculares e fibras de comprimento menor, diferentemente das amostras dos “Campos de Cima da Serra”. Quanto ao índice de vulnerabilidade, não foi encontrada diferença significativa entre as procedências. As alterações verificadas no lenho podem ser interpretadas como resposta adaptativa da espécie aos respectivos ambientes.

  1. Preparation and characterization of hydroxyapatite-coated iron oxide particles by spray-drying technique

    Directory of Open Access Journals (Sweden)

    karina Donadel

    2009-06-01

    Full Text Available Magnetic particles of iron oxide have been increasingly used in medical diagnosis by magnetic resonance imaging and in cancer therapies involving targeted drug delivery and magnetic hyperthermia. In this study we report the preparation and characterization of iron oxide particles coated with bioceramic hydroxyapatite by spray-drying. The iron oxide magnetic particles (IOMP were coated with hydroxyapatite (HAp by spray-drying using two IOMP/HAp ratios (0.7 and 3.2. The magnetic particles were characterized by way of scanning electronic microscopy, energy dispersive X-ray, X-ray diffraction, Fourier transformed infrared spectroscopy, flame atomic absorption spectrometry,vibrating sample magnetometry and particle size distribution (laser diffraction. The surface morphology of the coated samples is different from that of the iron oxide due to formation of hydroxyapatite coating. From an EDX analysis, it was verified that the surface of the coated magnetic particles is composed only of HAp, while the interior containsiron oxide and a few layers of HAp as expected. The results showed that spray-drying technique is an efficient and relatively inexpensive method for forming spherical particles with a core/shell structure.As partículas de óxido de ferro têm sido extensivamente usadas em diagnósticos médicos como agente de contraste para imagem por ressonância magnética e na terapia do câncer, dentre estas, liberação de fármacos em sitos alvos e hipertermia magnética. Neste estudo nós reportamos a preparação e caracterização de partículas magnéticas de óxido de ferro revestidas com a biocerâmica hidroxiapatita. As partículas magnéticasde óxido de ferro (PMOF foram revestidas com hidroxiapatita por spray-drying usando duas razões PMOF/HAp (0,7 e 3,2. As partículas magnéticas foram caracterizadas por microscopia eletrônica de varredura, energia dispersiva de raios X, difração de raios X, espectroscopia de absorção no infra

  2. Characterization of the optical grade synthetic quartz by X-ray topography; Caracterizacao de quartzo sintetico de grau optico por topografia de raios-X

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, Marcos S; Suzuki, Carlos K; Iwasaki, Fumiko [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica

    1996-09-01

    The first initiative to develop a technology to grow the optical grade synthetic quartz in our country has been conducted by the UNICAMP - JICA - ABC Crystals collaboration. This research shows that the solid inclusions concentrations is practically inexistent, less than 0.03 incl/cm{sup 3}, what satisfy the international standard requirements. On the other hand, the characterization studies by X-ray topography enabled us to estimate the dislocation line density of order of 1200 lines/cm{sup 2}. This value is higher than to the usual international standard requirements. From this study, we obtained a full knowledge of defects origin, where the optimization process could be done by using seeds with superior quality. (author) 16 refs., 4 figs., 1 tab.

  3. Múltiplos carcinomas basocelulares na região pubiana em uma paciente fototipo IV: relato de caso Multiple basal cell carcinomas in the pubic area in a patient with skin type IV: case report

    Directory of Open Access Journals (Sweden)

    Cristiani Banhos Ferreira

    2011-06-01

    Full Text Available O carcinoma basocelular é a neoplasia maligna cutânea mais comum em humanos, localizando-se, frequentemente, em áreas expostas e em indivíduos de pele clara. Relata-se o caso de uma paciente de 62 anos, faiodérmica, com múltiplas lesões de bordas discretamente elevadas, eritemato-acastanhadas na região pubiana, cujo diagnóstico clínico foi carcinoma basocelular pigmentado, confirmado através do estudo histopatológico. A imunoistoquímica das lesões foi negativa para a pesquisa de papiloma vírusBasal cell carcinoma is the most common type of malignant cutaneous neoplasm in humans, being more frequently located in exposed areas and in fair-skinned individuals. It is reported the case of a 62-yearold female patient, brown-skinned ,with multiple lesions with edges slightly raised, reddish-brown in the pubic region, whose clinical diagnosis was pigmented basal cell carcinoma, confirmed by histopathology. Immunohistochemistry of the lesions was negative for the detection of papilloma virus

  4. Chemical and structural effects on the high-temperature mechanical behavior of (1−x)(Na{sub 1/2}Bi{sub 1/2})TiO{sub 3}-xBaTiO{sub 3} ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Deluca, Marco [Materials Center Leoben Forschung GmbH, Roseggerstraße 12, 8700 Leoben (Austria); Institut für Struktur- und Funktionskeramik, Montanuniversitaet Leoben, Peter Tunner Straße 5, 8700 Leoben (Austria); Picht, Gunnar [Institute of Applied Materials, Ceramics in Mechanical Engineering, Karlsruhe Institute of Technology, 76131 Karlsruhe (Germany); Robert Bosch GmbH, Corporate Sector Research and Advance Engineering Applied Research 1, Robert Bosch Platz 1, 70839 Gerlingen (Germany); Hoffmann, Michael J. [Institute of Applied Materials, Ceramics in Mechanical Engineering, Karlsruhe Institute of Technology, 76131 Karlsruhe (Germany); Rechtenbach, Annett; Töpfer, Jörg [Department of SciTec, University of Applied Sciences Jena, Carl-Zeiß-Promenade 2, 07745 Jena (Germany); Schader, Florian H.; Webber, Kyle G., E-mail: webber@ceramics.tu-darmstadt.de [Institute of Materials Science, Technische Universität Darmstadt, 64287 Darmstadt (Germany)

    2015-04-07

    Bismuth sodium titanate–barium titanate [(1−x)(Na{sub 1/2}Bi{sub 1/2})TiO{sub 3}-xBaTiO{sub 3}, NBT-100xBT] is one of the most well studied lead-free piezoelectric materials due in large part to the high field-induced strain attainable in compositions near the morphotropic phase boundary (x = 0.06). The BaTiO{sub 3}-rich side of the phase diagram, however, has not yet been as comprehensively studied, although it might be important for piezoelectric and positive temperature coefficient ceramic applications. In this work, we present a thorough study of BaTiO{sub 3}-rich NBT-100xBT by ferroelastic measurements, dielectric permittivity, X-ray diffraction, and Raman spectroscopy. We show that the high-temperature mechanical behavior, i.e., above the Curie temperature, T{sub C}, is influenced by local disorder, which appears also in pure BT. On the other hand, in NBT-100xBT (x < 1.0), lattice distortion, i.e., tetragonality, increases, and this impacts both the mechanical and dielectric properties. This increase in lattice distortion upon chemical substitution is counterintuitive by merely reasoning on the ionic size, and is due to the change in the A-O bond character induced by the Bi{sup 3+} electron lone pair, as indicated by Raman spectroscopy.

  5. Estudo comparativo do rendimento de dois tipos de pás de remo e da técnica da remada em barco "skiff"

    OpenAIRE

    Adriana Marques Toigo

    1999-01-01

    O presente trabalho teve como objetivo estudar a eficiência na aplicação de força a um barco “skiff” com dois tipos de pás de remo (“standard” e cutelo) e verificar se a utilização desses dois tipos de pás produziam alterações na técnica da remada. Um barco “skiff” foi preso por seis cabos de aço às bordas de uma piscina coberta. Um dinamômetro foi instalado a um destes cabos para coletar os dados de força, enquanto a técnica da remada foi estudada por meio de um sistema de cinemetria. A amos...

  6. Phase transition and piezoelectric properties of K0.48Na0.52NbO3-LiTa0.5Nb0.5O3-NaNbO3 lead-free ceramics

    International Nuclear Information System (INIS)

    Gao Feng; Liu Liangliang; Xu Bei; Cao Xiao; Deng Zhenqi; Tian Changsheng

    2011-01-01

    Highlights: → The evolution of the crystal structure for the new phase K 3 Li 2 Nb 5 O 15 was described. → The dielectric relaxor behavior would be strengthened by increasing plate-like NN. → k p and d 33 decrease with increasing amount of plate-like NN. → 0.01-0.03 mol of plate-like NN is a proper content for texturing ceramics by RTGG. - Abstract: Plate-like NaNbO 3 (NN) particles were used as the raw material to fabricate (1 - x)[0.93 K 0.48 Na 0.52 Nb O 3 -0.07Li(Ta 0.5 Nb 0.5 )O 3 ]-xNaNbO 3 lead-free piezoelectric ceramics using a conventional ceramic process. The effects of NN on the crystal structure and piezoelectric properties of the ceramics were investigated. The results of X-ray diffraction suggest that the perovskite phase coexists with the K 3 Li 2 Nb 5 O 15 phase, and the tilting of the oxygen octahedron is probably responsible for the evolution of the tungsten-bronze-typed K 3 Li 2 Nb 5 O 15 phase. The Curie temperature (T C ) is shifted to lower temperature with increasing NN content. (1 - x)[0.93 K 0.48 Na 0.52 NbO 3 -0.07Li(Ta 0.5 Nb 0.5 )O 3 ]-xNaNbO 3 ceramics show obvious dielectric relaxor characteristics for x > 0.03, and the relaxor behavior of ceramics is strengthened by increasing NN content. Both the electromechanical coupling factor (k p ) and the piezoelectric constant (d 33 ) decrease with increasing amounts of NN. 0.01-0.03 mol of plate-like NaNbO 3 in 0.93 K 0.48 Na 0.52 NbO 3 -0.07Li(Ta 0.5 Nb 0.5 )O 3 gives the optimum content for preparing textured ceramics by the RTGG method.

  7. [Effects of NaCl stress on cation contents in different pumpkin cultivars' seedlings].

    Science.gov (United States)

    Li, Wei-Xin; Chen, Gui-Lin; Ren, Liang-Yu; Wang, Peng

    2008-03-01

    With the seedlings of 19 pumpkin cultivars as test materials, this paper studied the variations of Na+, K+, Ca2+, Na+/K+, Na+/Ca2+, SN+, K+ and SNa+, ca2+ in their shoots and roots under the stress of 300 mmol NaCl x L(-1). The results showed that after an 8-day exposure to 300 mmol NaCl x L(-1), the Na+ content in the seedlings increased significantly while the K+ content decreased, resulting in the brokenness of ion balance. The root Na+ content, shoot Na+/K+ and Na+/Ca2+ ratios, and SNa+, K+ and SNa+, Ca2+ of Cucurbita moschata (Q1) were significantly higher than those of C. maxima (H2) and C. ficifolia (H3). The variation tendency of these parameters of different pumpkin cultivars' seedlings were nearly consistent with the salt injury index of the seedlings under NaCl stress, which further proved that the strong salt-tolerance of Q1 was related to the lower values of shoot Na+/K+, Na+/Ca2+, SNa+, K+ and SNa+, Ca2+, and the high contents of K+ and Ca2+, while the salt-sensitivity of H2 and H3 was related to the higher values of shoot Na+/K+, Na+/Ca2+, SNa+, K+ and SNa+, Ca2+, and low contents of K+ and Ca2+ under NaCl stress.

  8. Raio Piiroja : mängijatest ei suudetud maksimumi pigistada / Andres Kalvik

    Index Scriptorium Estoniae

    Kalvik, Andres, 1982-

    2007-01-01

    Vt. ka Postimees : na russkom jazõke 19. nov., lk. 13. Eesti koondis võlgneb EM-valikturniiri viimase kohtumise 2:0 Andorra üle suuresti Andres Operile. Kommenteerib Andorra koondise peatreener David Rodrigo

  9. Investigation on transition behavior and electrical properties of (K0.5Na0.51-xLixNb0.84Ta0.1Sb0.06O3 around polymorphic phase transition region

    Directory of Open Access Journals (Sweden)

    Chen Zhu

    2014-01-01

    Full Text Available (K0.5Na0.51-xLixNb0.84Ta0.1Sb0.06O3 (KNLNTS lead free ceramics with different Li concentration were fabricated by conventional solid-state reaction method. By increasing Li ions in KNLNTS, the grains grow up and the crystal structure changes from orthorhombic to tetragonal. When 0.03 ≤ x ≤ 0.05, the ceramics structure lays in PPT region. Polarization versus electric field (P-E hysteresis loops at room temperature show good ferroelectric properties and the remnant polarization decreases by increasing Li content while coercive electric keeps almost unchanged. In PPT region, taking x = 0.04 as an example, the sample shows excellent dielectric properties: the dielectric constant is 1159 and loss tangent is 0.04, while the piezoelectric constant d33 is 245 pC/N and kp is 0.44 at room temperature, it is promising for (K0.5Na0.51-xLixNb0.84Ta0.1Sb0.06O3 with 4 at. % Li to substitute PZT.

  10. Na-Si binary phase diagram and solution growth of silicon crystals

    International Nuclear Information System (INIS)

    Morito, H.; Yamada, T.; Ikeda, T.; Yamane, H.

    2009-01-01

    In the present study, a Na-Si binary phase diagram was first presented from the results of differential thermal analysis and X-ray diffraction. Based on the phase diagram, we performed low-temperature formation of single crystals, film and porous bulk of Si by vaporizing Na from a Na-Si melt at 800 or 900 deg. C.

  11. Crystals structure of Na3Li(TiF6)2

    International Nuclear Information System (INIS)

    Popov, D.Yu.; Antokhina, T.F.; Gerasimenko, A.V.; Kajdalova, T.A.; Sergienko, V.I.

    2004-01-01

    Crystals of Na 3 Li(TiF 6 ) 2 (1) were synthesized in aqueous solution and characterized by the elementary and X-ray phase analysis methods. According to X-ray diffraction analysis data compound 1 is crystallized in a tetragonal crystal system with the following parameters: a=5.130(1), c=18.046(4) A, Z=2, space group P4-bar2 1 c. Alternating layers on the basis of dimers made up by octahedrons of TiF 6 and Na(1)F 6 constitute the frame of compound 1 crystal structure. The dimer layers are joined in a continuous frame by Na(2) and Li cations. Coordination polyhedron of Li atom is tetrahedron (Li-F 1.898(3) A) [ru

  12. Influências de Atta spp. (Hymenoptera: Formicidae na recuperação da vegetação pós-fogo em floresta de transição amazônica Influences of leafcutter ant Atta spp. (Hymenoptera: Formicidae on vegetation recovery after fire in Amazonian transitional forest

    Directory of Open Access Journals (Sweden)

    Karine Santana Carvalho

    2012-03-01

    Full Text Available Este estudo investigou o papel das saúvas na recuperação da vegetação pós-fogo. Foi hipotetizado que a perturbação do fogo aumenta a abundância de ninhos de saúva (1 e as atividades de remoção de sementes (2 e desfolha (3, especialmente no ambiente de borda. Os ninhos de saúva foram inventariados e mapeados e após 17 meses, checados para o registro de sua atividade e de novas colônias emergindo na área. Realizou-se experimentos comparativos de remoção de sementes e desfolha de plântulas em duas parcelas de 50 ha, uma submetida a fogo anual (tratamento e outra sem fogo (controle. A abundância de ninhos de saúva foi maior na parcela tratamento que na parcela controle, especialmente na borda da floresta. As espécies encontradas foram: Atta cephalotes, A. laevigata e A. sexdens , sendo esta última a espécie mais abundante e que mostrou aumento em número de colônias ativas após 17 meses. O aumento na abundância de ninhos na parcela tratamento foi acompanhado por um aumento na atividade dessas formigas. Enquanto mais de duas folhas foram arrancadas por plântula nessa parcela, menos de uma foi registrada na parcela controle. Também a abundância média de galhos desfolhados e de sementes removidas por saúvas foi maior na parcela tratamento que na parcela controle. As saúvas tanto podem diminuir ou retardar o processo de regeneração florestal pós-fogo, quanto acelerá-lo, devido à elevada predação seletiva que favorece as espécies menos palatáveis. Desta forma, suas atividades podem modificador apenas a composição da vegetação recuperando-se do fogo.In this study we investigated the role of leaf-cutting ants in the post-fire vegetation recovery. We hypothesized that a forest plot submitted to annual fire presents: (1 higher abundance of leaf-cutting ant nests; (2 higher removal of seeds; and (3 higher herbivory rates of leaf-cutting ants, when compared to the forest plots without fire (control. The leaf

  13. A 125Te and 23Na NMR investigation of the structure and crystallisation of sodium tellurite glasses.

    Science.gov (United States)

    Holland, D; Bailey, J; Ward, G; Turner, B; Tierney, P; Dupree, R

    2005-01-01

    125Te static nuclear magnetic resonance (NMR) and 23Na and 125Te magic angle spinning (MAS) NMR have been used, in conjunction with X-ray diffraction, to examine the structure and crystallisation behaviour of glasses of composition xNa2O.(1-x)TeO2 (0.075 x 0.4). The MAS NMR 23Na spectra from the glasses are broad and featureless but shift by approximately +5 ppm with increased x, i.e. as the system becomes more ionic. The static 125Te NMR spectra show an increase in axial symmetry with increasing x, indicating a shift from predominantly [TeO4] to [TeO3] structural units. The 23Na and 125Te spectra from the crystallised samples have been fitted to obtain information on the sites in the metastable crystal phases, which are the first to form on heating and which are therefore more closely related to the glass structure than thermodynamically stable crystal phases. New sodium tellurite phases are reported, including a sodium stabilised, face centred cubic phase related to delta-TeO2; a metastable form of Na2Te4O9 containing 3 sodium and 4 tellurium sites; and a metastable form of Na2Te2O5 containing 2 sodium sites. There is evidence of oxidation of TeIV to TeVI occurring in glasses with high values of x and, at x=0.40 and 0.50 (outside the glass forming range), some sodium metatellurate (Na2TeO4) is formed at the same time as sodium metatellurite (Na2TeO3). The 125Te shift is very sensitive to environment within the sodium tellurite system, covering more than 320 ppm, with anisotropies varying from 640 to 1540 ppm. The lack of features in the 125Te spectra of the glass phases, combined with the large shift range and high but variable anisotropy, means than it is not possible to obtain a unique fit to any presumed species present. Furthermore, the chemical shift anisotropy parameters for three of the four Te sites in the Na2Te4O9 phase are found to lie outside the range used for previous simulations of glass spectra.

  14. Mudanças na estrutura do solo avaliada com uso de tomografia computadorizada.

    OpenAIRE

    PIRES, L. F.; BACCHI, O. O. S.

    2010-01-01

    O objetivo deste trabalho foi avaliar, em escala milimétrica, a modificação da densidade e da porosidade de amostras deformadas de solo submetidas a ciclos de umedecimento e secamento (U-S), por meio da tomografia computadorizada de raios gama. Amostras com 98,1 cm³ foram preparadas procedendo ao peneiramento do solo em malha de 2 mm e acondicionamento de forma homogênea em tubos de PVC. As amostras de solo foram submetidas a um, dois e três ciclos de U-S. As amostras controle não foram subme...

  15. Preparation of Zn(BH4)2 and diborane and hydrogen release properties of Zn(BH4)2+xMgH2 (x=1, 5, 10, and 15)

    Science.gov (United States)

    Kwak, Young Jun; Kwon, Sung Nam; Song, Myoung Youp

    2015-09-01

    Zn(BH4)2 was prepared by milling ZnCl2 and NaBH4 in a planetary ball mill under Ar atmosphere, and Zn(BH4)2+xMgH2 (x=1, 5, 10, and 15) samples were prepared. Diborane (B2H6) and hydrogen release characteristics of the Zn(BH4)2 and Zn(BH4)2+xMgH2 samples were studied. The samples synthesized by milling ZnCl2 and NaBH4 contained Zn(BH4)2 and NaCl, together with small amounts of ZnCl2 and NaBH4. We designated these samples as Zn(BH4)2(+NaCl). The weight loss up to 400 °C of the Zn(BH4)2(+NaCl) sample synthesized by milling 4 h was 11.2 wt%. FT-IR analysis showed that Zn(BH4)2 was formed in the Zn(BH4)2(+NaCl) samples. MgH2 was also milled in a planetary ball mill, and mixed with the Zn(BH4)2(+NaCl) synthesized by milling for 4 h in a mortar and pestle. The weight loss up to 400 °C of Zn(BH4)2(+NaCl)+MgH2 was 8.2 wt%, corresponding to the weight % of diborane and hydrogen released from the Zn(BH4)2(+NaCl)+MgH2 sample, with respect to the sample weight. DTA results of Zn(BH4)2(+NaCl)+xMgH2 showed that the decomposition peak of Zn(BH4)2 was at about 61 °C, and that of MgH2 was at about 370-389 °C.

  16. Nota sobre a variação sazonal da circulação geostrófica na borda da plataforma continental: Cabo de São Tomé (RJ e a Baía de Guanabara (RJ Seasonal variation of geostrophic circulation on the continental slope: Cape of São Tomé (RJ and Guanabara Bay (RJ

    Directory of Open Access Journals (Sweden)

    Ademildes Maria Paviglione

    1985-01-01

    Full Text Available Cinco observações oceanográficas espaciais quase sinóticas, realizadas de janeiro de 1970 a fevereiro de 1971, na região entre o Cabo de São Tomé e a Baía de Guanabara, são usadas para descrever a circulação sazonal e as condições de fluxo da Corrente do Brasil próximo à plataforma continental. As velocidades relativas foram calculadas sobre superfícies isanostéricas, de acordo com o método sugerido por Montgomery (1937. A precisão do método foi analisada, com base na propagação dos erros instrumentais das medidas da temperatura, da salinidade e da profundidade sobre o volume específico e a aceleração potencial, obtendo-se uma precisão de cerca de ± 3,0 cm s-1, para a velocidade relativa, e um máximo de ± 2,5 Sv, para o transporte de volume através da secção transversal. As correntes geostróficas de superfície, calculadas com referência à superfície isanostérica de 100 cl ton-1, sao geralmente mais intensas através das secções a leste de Cabo Frio, onde elas atingem valores máximos (~90 cm s-1 na borda da plataforma continental durante o verão, e valores acima de 86 cm s-1 ocorrem no inverno, mais além, a distâncias da costa maiores do que 140 km. Os diagramas T-S mostram os detalhes da distribuição do fluxo nas classes características e o fato de que 50% do transporte total corresponde à Massa de Água Tropical, próxima da superfície isanostérica de 220 cl ton-1. As variações do transporte total na coluna de água, desde a superfície até a superfície isanostérica de referência, foram analisadas para estimar o transporte por unidade de largura.Five-nearly-synoptic spatial oceanographic observations, taken from January, 1970 to February, 1971, in the region between Cape of São Tomé and Guanabara Bay, are used to describe the seasonal circulation and flow conditions of the Brazil Current, close to the continental slope. The relative geostrophic velocities were calculated over isanosteric

  17. A comparative study of shadow shield whole body monitor incorporated with 203 mm dia. x 102 mm thick and 102 mm dia. x 76 mm thick NaI(TI) detectors

    International Nuclear Information System (INIS)

    Sankhla, Rajesh; Singh, I.S.; Rao, D.D.

    2016-01-01

    The whole body counting using Shadow Shield Whole Body Monitor (SSWBM) proved to be a popular method for assessment of internal contamination due to high energy gamma (E>200 keV) emitting radio nuclides that got inadvertently incorporated in the occupational workers. Currently ∼ 5 SSWBMs are operational at various DAE nuclear facilities throughout the country. The shielding of SSWBMs are said to be designed for 102 mm x 76 mm NaI(Tl) detector and over a period of time, the same concept is being followed. At present, the number of subjects monitored per annum has increased significantly compared to earlier years due to the increase in nuclear facilities at different sites and also increase in number of contract personnel. Aim of this study is to develop/upgrade the existing SSWBMs to increase their capabilities in terms of throughput without compromising on sensitivity. This work includes response studies of individual detectors of sizes 102 mm x 76 mm and 203 mm x 102 mm housed in SSWBM in terms of background, efficiency and Minimum Detection Activity (MDA) for different gamma emitting radio nuclides using Bhabha Atomic Research Centre reference Bottle Mannequin ABsorption (BOMAB) phantom

  18. High-pressure versus isoelectronic doping effect on the honeycomb iridate Na2IrO3

    Science.gov (United States)

    Hermann, V.; Ebad-Allah, J.; Freund, F.; Pietsch, I. M.; Jesche, A.; Tsirlin, A. A.; Deisenhofer, J.; Hanfland, M.; Gegenwart, P.; Kuntscher, C. A.

    2017-11-01

    We study the effect of isoelectronic doping and external pressure in tuning the ground state of the honeycomb iridate Na2IrO3 by combining optical spectroscopy with synchrotron x-ray diffraction measurements on single crystals. The obtained optical conductivity of Na2IrO3 is discussed in terms of a Mott-insulating picture versus the formation of quasimolecular orbitals and in terms of Kitaev interactions. With increasing Li content x , (Na1 -xLix )2IrO3 moves deeper into the Mott-insulating regime, and there are indications that up to a doping level of 24% the compound comes closer to the Kitaev limit. The optical conductivity spectrum of single-crystalline α -Li2IrO3 does not follow the trends observed for the series up to x =0.24 . There are strong indications that α -Li2IrO3 is not as close to the Kitaev limit as Na2IrO3 and lies closer to the quasimolecular orbital picture instead. Except for the pressure-induced hardening of the phonon modes, the optical properties of Na2IrO3 seem to be robust against external pressure. Possible explanations of the unexpected evolution of the optical conductivity with isolectronic doping and the drastic change between x =0.24 and x =1 are given by comparing the pressure-induced changes of lattice parameters and the optical conductivity with the corresponding changes induced by doping.

  19. Piezoelectric and ferroelectric properties of lead-free (1-x)(Na{sub 1−y}K{sub y})(Nb{sub 1−z}Sb{sub z})O{sub 3}-xBaTiO{sub 3} solid solution

    Energy Technology Data Exchange (ETDEWEB)

    Sasikumar, S., E-mail: sasikuhan@gmail.com [Research Centre and Post Graduate Department of Physics, The Madura College, Madurai 625 011, Tamil Nadu (India); Saravanan, R. [Research Centre and Post Graduate Department of Physics, The Madura College, Madurai 625 011, Tamil Nadu (India); Aravinth, K. [SSN Research Center, SSN College of Engineering, Kalavakkam 603 110, Tamil Nadu (India)

    2017-05-01

    The solid solutions of lead-free (1-x)(Na{sub 1-y}K{sub y})(Nb{sub 1-z}Sb{sub z})O{sub 3}-xBaTiO{sub 3} (with x=0.1, 0.2; y=0.03, 0.05; z=0.05, 0.1) (abbreviated as (1-x)NKNS-xBT) ceramics have been synthesized using conventional solid-state reaction method. The results of X-ray diffraction analysis show that all the grown specimens of NKNS display typical perovskite structure. With BaTiO{sub 3} (BT) addition, a structural phase transition from tetragonal to cubic structure has been observed. The structural parameters of (1-x)NKNS-xBT powders were determined by profile refinements based on the analysis of X-ray powder diffraction. The charge density distributions of the prepared samples have been investigated by observed structure factors to understand the chemical bonding nature of (1-x)NKNS-xBT powders. The optical absorption of the ceramics has been investigated using UV–visible spectrophotometer. Scanning electron microscopic (SEM) measurements were performed to study the surface morphology of the prepared solid solutions. The elemental compositions of the (1-x)NKNS-xBT samples were analyzed by energy-dispersive X-ray (EDS) spectrometer. The dielectric constant versus temperature plots of the solid solutions exhibit ferroelectric to paraelectric phase transition, which is dependent on the BaTiO{sub 3} content. The ferroelectric nature of the samples has been determined through polarization and electric field hysteresis measurements.

  20. Strong piezoelectricity in (1 - x)(K0.4Na0.6)(Nb0.96Sb0.04)O3-xBi0.5K0.5Zr1-ySnyO3 lead-free binary system: identification and role of multiphase coexistence.

    Science.gov (United States)

    Zheng, Ting; Wu, Jiagang; Xiao, Dingquan; Zhu, Jianguo; Wang, Xiangjian; Xin, Lipeng; Lou, Xiaojie

    2015-03-18

    Here we report a strong piezoelectric activity in (1 - x)(K0.4Na0.6)(Nb0.96Sb0.04)O3-xBi0.5K0.5Zr1-ySnyO3 lead-free ceramics by designing different phase boundaries. The phase boundaries concerning rhombohedral-orthorhombic-tetragonal (R-O-T) and rhombohedral-tetragonal (R-T) multiphase coexistence were attained by changing BKZS and Sn contents and then were identified by the X-ray diffraction patterns as well as temperature-dependent permittivity and ν1 Raman modes associated with BO6 perovskite octahedron. A high strain (strain = 0.21-0.28% and d33* = 707-880 pm/V) and a strong piezoelectric coefficient (d33 = 415-460 pC/N) were shown in the ceramics located at the multiphase coexistence region. The reported results of this work are superior to that (d33* ∼ 570 pm/V and d33 ∼ 416 pC/N) of the textured (K,Na,Li)(Nb,Ta,Sb)O3 ceramics [Nature 2004, 432, 84]. We believe that the material system of this work will become one of the most promising candidates for piezoelectric actuators.

  1. Formation of oriented membrane multilayers of Na/K-ATPase

    International Nuclear Information System (INIS)

    Pachence, J.M.; Knott, R.; Edelman, I.S.; Schoenborn, B.P.; Wallace, B.A.

    1982-01-01

    The isolated membrane-bound enzyme retains its ouabain-sensitive ATP hydrolysis activity, and produces ATP-dependent Na + and K + fluxes when incorporated into phospholipid vesicles. The ultimate goal of this work is to determine its low resolution structure using both X-ray and neutron diffraction. A number of methods were used to impart lamellar stacking order to highly purified pig Na/K-ATPase membranes. Upon partial dehydration, x-ray diffraction from Na/K-ATPase membrane multilayers at 98% relative humidity yielded discrete reflections of 118 A periodicity, diffracting to 1/14.8 A -1 , additionally, continuous diffraction to 1/10 A -1 was obtained. Subjecting the membrane multilayers to high magnetic fields improved the quality of the lamellar diffraction dramatically. Neutron diffraction studies of the partially dehydrated Na/K-ATPase membrane multilayers detected a mosaic spread of 2 0 when the samples were subjected to a magnetic field of 5 Tesla perpendicular to the membrane surface; the reflections were narrower than the camera line width; hence, the lattice disorder has also decreased significantly, although only four orders were measured

  2. Superconducting specific heat jump Δ C ∝ T{sub c}{sup β} (β ∝ 2) and gapless Fermi surfaces in K{sub 1-x}Na{sub x}Fe{sub 2}As{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Grinenko, V.; Efremov, D.V.; Drechsler, S.L.; Aswartham, S.; Gruner, D.; Roslova, M.; Morozov, I.; Nenkov, K.; Wolter, A.U.B. [Leibniz-Institute for Solid State and Materials Research, IFW-Dresden (Germany); Wurmehl, S.; Buechner, B. [Leibniz-Institute for Solid State and Materials Research, IFW-Dresden (Germany); Institut fuer Festkoerperphysik, TU Dresden (Germany); Holzapfel, B. [Leibniz-Institute for Solid State and Materials Research, IFW-Dresden (Germany); Karlsruhe Institute of Technology (KIT), Eggenstein-Leopoldshafen (Germany)

    2014-07-01

    We present a systematic study of the electronic specific heat jump (Δ C{sub el}) at the superconducting transition temperature T{sub c} of K{sub 1-x}Na{sub x}Fe{sub 2}As{sub 2}. Both T{sub c} and Δ C{sub el} monotonously decrease with increasing x. The jump scales approximately with a novel power-law: Δ C{sub el} ∝ T{sub c}{sup β} with β ∼ 2 determined by the impurity scattering rate. This finding is in sharp contrast to most of all iron-pnictide superconductors with a cubic Bud'ko-Ni-Canfield (BNC) scaling. Our observations, also, suggests that disorder diminishes the small gaps leading to partial gapless superconductivity which results in a large residual Sommerfeld coefficient in the superconducting state for x > 0. Both T-dependence of C{sub el}(T) in the superconducting state and the nearly quadratic scaling of Δ C{sub el} at T{sub c} are well described by the Eliashberg-theory for a single-band d-wave superconductor with weak pair-breaking due to nonmagnetic impurities having reduced the density of superconducting quasi-particles.

  3. Phase equilibria in the NaF-CdO-NaPO{sub 3} system at 873 K and crystal structure and physico-chemical characterizations of the new Na{sub 2}CdPO{sub 4}F fluorophosphate

    Energy Technology Data Exchange (ETDEWEB)

    Aboussatar, Mohamed [Université Clermont Auvergne, Université Blaise Pascal, Institut de Chimie de Clermont-Ferrand, UMR 6296 CNRS, BP 10448, F-63000 Clermont-Ferrand (France); Laboratoire de Physico-Chimie de l’État Solide, Faculté des Sciences de Sfax, Université de Sfax, BP 1171, 3000 Sfax (Tunisia); Mbarek, Aïcha [Laboratoire de Chimie Industrielle, Ecole Nationale d’Ingénieurs de Sfax, Université de Sfax, BP W3038, 3000 Sfax (Tunisia); Naili, Houcine [Laboratoire de Physico-Chimie de l’État Solide, Faculté des Sciences de Sfax, Université de Sfax, BP 1171, 3000 Sfax (Tunisia); El-Ghozzi, Malika [Université Clermont Auvergne, Université Blaise Pascal, Institut de Chimie de Clermont-Ferrand, UMR 6296 CNRS, BP 10448, F-63000 Clermont-Ferrand (France); Chadeyron, Geneviève [Université Clermont Auvergne, Institut de Chimie de Clermont-Ferrand, UMR 6296 CNRS/UBP/SIGMA, BP 10448, F-63000 Clermont-Ferrand (France); Avignant, Daniel [Université Clermont Auvergne, Université Blaise Pascal, Institut de Chimie de Clermont-Ferrand, UMR 6296 CNRS, BP 10448, F-63000 Clermont-Ferrand (France); Zambon, Daniel, E-mail: Daniel.Zambon@univ-bpclermont.fr [Université Clermont Auvergne, Université Blaise Pascal, Institut de Chimie de Clermont-Ferrand, UMR 6296 CNRS, BP 10448, F-63000 Clermont-Ferrand (France)

    2017-04-15

    Isothermal sections of the diagram representing phase relationships in the NaF-CdO-NaPO{sub 3} system have been investigated by solid state reactions and powder X-ray diffraction. This phase diagram investigation confirms the polymorphism of the NaCdPO{sub 4} side component and the structure of the ß high temperature polymorph (orthorhombic, space group Pnma and unit cell parameters a=9.3118(2), b=7.0459(1), c=5.1849(1) Å has been refined. A new fluorophosphate, Na{sub 2}CdPO{sub 4}F, has been discovered and its crystal structure determined and refined from powder X-ray diffraction data. It exhibits a new 3D structure with orthorhombic symmetry, space group Pnma and unit cell parameters a=5.3731(1), b=6.8530(1), c=12.2691(2) Å. The structure is closely related to those of the high temperature polymorph of the nacaphite Na{sub 2}CaPO{sub 4}F and the fluorosilicate Ca{sub 2}NaSiO{sub 4}F but differs essentially in the cationic repartition since the structure is fully ordered with one Na site (8d) and one Cd site (4c). Relationships with other Na{sub 2}M{sup II}PO{sub 4}F (M{sup II}=Mg, Ca, Mn, Fe, Co, Ni) have been examined and the crystal-chemical and topographical analysis of these fluorophosphates is briefly reviewed. IR, Raman, optical and {sup 19}F, {sup 23}Na, {sup 31}P MAS NMR characterizations of Na{sub 2}CdPO{sub 4}F have been investigated. - Graphical abstract: The structure of the compound Na{sub 2}CdPO{sub 4}F, discovered during the study of the phase relationships in the NaF-CdO-NaPO{sub 3} system, has been determined and compared with other Na{sub 2}M{sup II}PO{sub 4}F fluorophosphates. - Highlights: • XRD analysis of the isothermal section of the NaF-CdO-NaPO{sub 3} system at 923 K. • Rietveld refinement of the high temperature polymorph β-NaCdPO{sub 4}. • Crystal structure of the new Na{sub 2}CdPO{sub 4}F fluorophosphate determined from powder XRD. • Crystal structure - composition relationships of Na{sub 2}M{sup II}PO{sub 4}F compounds

  4. Molecular composition of vapor in the NaF-ZrF4 system

    International Nuclear Information System (INIS)

    Korenev, Yu.M.; Sidorov, L.N.; Rykov, A.N.; Novoselova, A.V.

    1980-01-01

    The NaF-ZrF 4 system is studied. It is established that Na 2 ZrF 6 , NaZrF 5 , (NaZrF 5 ) 2 , NaZr 2 F 9 complex molecules are present in the saturated vapor alongside with pure components. Partial pressures of all vapor components are determined. The values of partial pressure and evaporation heat have been used to calculate the vapor composition above the system; T-x and P-T projections of the phase diagram of the NaF-ZrF 4 system are plotted

  5. Evaluation of absorbed radiation dose rate in a didactic X-ray equipment; Avaliacao da taxa de dose absorvida em um equipamento de raios-X didatico

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Phelipe Amaral Ferreira; Perini, Ana Paula; Neves, Lucio Pereira, E-mail: lucio.neves@ufu.br [Universidade Federal de Uberlandia (UFU), MG (Brazil). Instituto de Fisica

    2016-07-01

    This work was performed in order to create a new didactic experiment in the X-ray apparatus of PHYWE, where the saturation current was obtained through a free air ionization chamber. The values of saturation currents were obtained in two ways. Initially, the anodic DDP was kept constant and the anodic current was varied. In the second way, the anodic current was kept constant while the anodic DDP was varied. Therefore, we were able to evaluate the dependence of the absolved dose rate in relation to the DDP and the tube current. (author)

  6. Major element concentrations in Mangrove Pore Water, Sepetiba Bay, Brazil

    Directory of Open Access Journals (Sweden)

    Christian J. Sanders

    2012-03-01

    Full Text Available Concentrations of cations and anions of major elements (Na+, Ca2+, Mg2+, K+, Cl-, SO4 2- were analyzed in the pore water of a mangrove habitat. Site specific major element concentrations were identified along a four piezometric well transect, which were placed in distinct geobotanic facies. Evapotranspiration was evident in the apicum station, given the high salinity and major element concentrations. The station landward of an apicum was where major element/Cl- ratios standard deviations are greatest, suggesting intense in situ diagenesis. Molar ratios in the most continental station (4 are significantly lower than the nearby freshwater source, indicating a strong influence of sea water flux into the outer reaches of the mangrove ecosystem and encroaching on the Atlantic rain forest. Indeed, the SO4 2-/Cl- and Ca2+/Cl- ratios suggest limited SO4 2- reduction and relatively high Ca2+/Cl- ratios indicate a region of recent saltwater contact.As concentrações dos elementos maiores (Na+, Ca2+, Mg2+, K+, Cl-, SO4(2- foram analisadas na água intersticial de poços piezométricos localizados em diferentes fácies geobotânicas ao longo de um transecto num ecossistema de manguezal na Baía de Sepetiba - Rio de Janeiro. Maiores salinidades e concentrações dos íons maiores são evidencias de evapotranspiração no fácies apicum. Ainda no apicum foram observados os maiores desvios padrão da razão elemento/Cl− durante o período do estudo, indicando intensa diagênese in situ. Razões molares no piezômetro, localizado na borda do manguezal foram consideravelmente menores do que a fonte de água doce, indicando forte influência do fluxo de água marinha. Os resultados das razões molares, SO4(2-/Cl− e Ca2+/Cl− na borda do manguezal adjacente ao continente sugerem limitada redução de SO4(2- enquanto os valores relativamente altos na razão Ca2+/Cl− indicam contacto recente com água marinha.

  7. Contribuição ao estudo tecnológico da canela-azeitona, Rapanea ferruginea (Ruiz e Pav. Mez, uma espécie pioneira. I - Características anatômicas da madeira.

    Directory of Open Access Journals (Sweden)

    Antônio Lelis Pinheiro

    2009-09-01

    Full Text Available Normal 0 21 false false false MicrosoftInternetExplorer4 São descritos neste trabalho os aspectos anatômicos da madeira de Rapanea ferruginea (Ruiz et Pav. Mez. Apresentam-se dados quantitativos de 11 caracteres do xilema secundário, bem como fotomicrografias das estruturas anatômicas da madeira. Os raios largos e a largos e a baixa percentagem de parênquima axial são os caracteres mais importantes na estrutura do lenho.

  8. Effects of ion irradiation on the mechanical properties of SiNa wO xC yH z sol-gel derived thin films

    Science.gov (United States)

    Lucca, D. A.; Qi, Y.; Harriman, T. A.; Prenzel, T.; Wang, Y. Q.; Nastasi, M.; Dong, J.; Mehner, A.

    2010-10-01

    A study of the effects of ion irradiation of hybrid organic/inorganic modified silicate thin films on their mechanical properties is presented. NaOH catalyzed SiNa wO xC yH z thin films were synthesized by sol-gel processing from tetraethylorthosilicate (TEOS) and methyltriethoxysilane (MTES) precursors and spin-coated onto Si substrates. After drying at 300 °C, the films were irradiated with 125 keV H + or 250 keV N 2+ at fluences ranging from 1 × 10 14 to 2.5 × 10 16 ions/cm 2. Nanoindentation was used to characterize the films. Changes in hardness and reduced elastic modulus were examined as a function of ion fluence and irradiating species. The resulting increases in hardness and reduced elastic modulus are compared to similarly processed acid catalyzed silicate thin films.

  9. Piezoelectricity in K1−xNaxNbO3: First-principles calculation

    International Nuclear Information System (INIS)

    Li Qiang; Zhang Rui; Lv Tian-Quan; Zheng Li-Mei

    2015-01-01

    The piezoelectric properties of K 1−x Na x NbO 3 are studied by using first-principles calculations within virtual crystal approximation. To understand the critical factors for the high piezoelectric response in K 1−x Na x NbO 3 , the total energy, piezoelectric coefficient, elastic property, density of state, Born effective charge, and energy barrier on polarization rotation paths are systematically investigated. The morphotropic phase boundary in K 1−x Na x NbO 3 is predicted to occur at x = 0.521, which is in good agreement with the available experimental data. At the morphotropic phase boundary, the longitudinal piezoelectric coefficient d 33 of orthorhombic K 0.5 Na 0.5 NbO 3 reaches a maximum value. The rotated maximum of is found to be along the 50° direction away from the spontaneous polarization (close to the [001] direction). The moderate bulk and shear modulus are conducive to improving the piezoelectric response. By analyzing the energy barrier on polarization rotation paths, it is found that the polarization rotation of orthorhombic K 0.5 Na 0.5 NbO 3 becomes easier compared with orthorhombic KNbO 3 , which proves that the high piezoelectric response is attributed to the flattening of the free energy at compositions close to the morphotropic phase boundary. (paper)

  10. Structural and electrical characterization of BiFeO3-NaTaO3 multiferroic

    International Nuclear Information System (INIS)

    Mohanty, Suchismita; Choudhary, R.N.P.; Parida, B.N.; Padhee, R.

    2014-01-01

    Using a standard high-temperature solid-state reaction technique, polycrystalline samples of (Bi 1-x , Na x ) (Fe 1-x , Ta x ) O 3 (x = 0.0, 0.5) were prepared. The formation of the desired materials was confirmed by X-ray diffraction. The surface texture of the prepared materials recorded by scanning electron microscope exhibits a uniform grain distribution with small voids suggesting the formation of high-density pellet samples. The impedance and dielectric properties of the materials were investigated as a function of temperature and frequency. The relative dielectric constant and loss tangent of BiFeO 3 decrease on addition of NaTaO 3 (x = 0.5). The effect of addition of NaTaO 3 on grain and grain boundary contributions in the resistive and capacitive components of BiFeO 3 was studied using complex impedance spectroscopy. The value of activation energy due to both grain and grain boundary of both the samples is nearly same. The nature of variation of dc conductivity confirms the Arrhenius behavior of the materials. Study of frequency dependence of ac conductivity suggests that the materials obey Jonscher's universal power law and the presence of ionic conductivity. (orig.)

  11. Real-time high-resolution X-ray imaging and nuclear magnetic resonance study of the hydration of pure and Na-doped C3A in the presence of sulfates

    KAUST Repository

    Kirchheim, A. P.

    2011-02-21

    This study details the differences in real-time hydration between pure tricalcium aluminate (cubic C3A or 3CaO·Al2O 3) and Na-doped tricalcium aluminate (orthorhombic C3A or Na2Ca8Al6O18), in aqueous solutions containing sulfate ions. Pure phases were synthesized in the laboratory to develop an independent benchmark for the reactions, meaning that their reactions during hydration in a simulated early age cement pore solution (saturated with respect to gypsum and lime) were able to be isolated. Because the rate of this reaction is extremely rapid, most microscopy methods are not adequate to study the early phases of the reactions in the early stages. Here, a high-resolution full-field soft X-ray imaging technique operating in the X-ray water window, combined with solution analysis by 27Al nuclear magnetic resonance (NMR) spectroscopy, was used to capture information regarding the mechanism of C3A hydration during the early stages. There are differences in the hydration mechanism between the two types of C3A, which are also dependent on the concentration of sulfate ions in the solution. The reactions with cubic C3A (pure) seem to be more influenced by higher concentrations of sulfate ions, forming smaller ettringite needles at a slower pace than the orthorhombic C3A (Na-doped) sample. The rate of release of aluminate species into the solution phase is also accelerated by Na doping. © 2011 American Chemical Society.

  12. ERX: a software for editing files containing X-ray spectra to be used in exposure computational models

    International Nuclear Information System (INIS)

    Cabral, Manuela O.M.; Vieira, Jose W.; Silva, Alysson G.; Leal Neto, Viriato; Oliveira, Alex C.H.; Lima, Fernando R.A.

    2011-01-01

    Exposure Computational Models (ECMs) are utilities that simulate situations in which occurs irradiation in a given environment. An ECM is composed primarily by an anthropomorphic model (phantom), and a Monte Carlo code (MC). This paper presents a tutorial of the software Espectro de Raios-X (ERX). This software performs reading and numerical and graphical analysis of text files containing diagnostic X-ray spectra for use in algorithms of radioactive sources in the ECMs of a Grupo de Dosimetria Numerica. The ERX allows the user to select one among several X-ray spectrums in the energy range Diagnostic radiology X-Ray most commonly used in radiology clinics. In the current version of the ERX there are two types of input files: the contained in mspectra.dat file and the resulting of MC simulations in Geant4. The software allows the construction of charts of the Probability Density Function (PDF) and Cumulative Distribution Function (CDF) of a selected spectrum as well as the table with the values of these functions and the spectrum. In addition, the ERX allows the user to make comparative analysis between the PDF graphics of the two catalogs of spectra available, besides being can perform dosimetric evaluations with the selected spectrum. A software of this kind is an important computational tool for researchers in numerical dosimetry because of the diversity of Diagnostic radiology X-Ray machines, which implies in a mass of input data highly diverse. And because of this, the ERX provides independence to the group related to the data origin that is contained in the catalogs created, not being necessary to resort to others. (author)

  13. Efeito da filtração adicional nas doses de radiação e na qualidade das imagens nos exames videofluoroscópicos Effect of additional filtration on radiation doses and image quality in videofluoroscopic studies

    Directory of Open Access Journals (Sweden)

    Milton Melciades Barbosa Costa

    2009-12-01

    Full Text Available OBJETIVO: Investigar o efeito da adição de filtros de alumínio (1 mm e cobre (0,4 mm na redução das doses efetivas de radiação e na qualidade das imagens em exames videofluoroscópicos. MATERIAIS E MÉTODOS: Ao tubo de raios X adicionou-se câmara de ionização conectada a um eletrômetro para medir o produto kerma-área, com técnica de 65 kVp e 0,7 mA, sem e com adição dos filtros. Foi medida resolução espacial, a de baixo contraste e tons de cinza, utilizando os objetos de teste de Leeds. Quinze voluntários tiveram o produto kerma-área/minuto do estudo faríngeo comparados, dez com filtração e base e cinco com adição dos filtros associados. RESULTADOS: A adição dos filtros separados ou associados produziu expressiva redução do produto kerma-área, com ganho na qualidade das imagens videofluoroscópicas determinado pela maior separação dos tons de cinza e aumento da relação brilho/contraste da curva de cinza. CONCLUSÃO: A interposição adicional de filtros de alumínio e cobre, em especial quando associados, melhora a qualidade das imagens, com expressiva redução das doses de radiação necessárias à sua geração.OBJECTIVE: The purpose of thys study was to investigate the effect of the addition of aluminum (1 mm and copper (0.4 mm filters on effective radiation doses and image quality in videofluoroscopy. MATERIALS AND METHODS: An ionization chamber coupled with an electrometer was added to x-ray tube to measure the kerma area product with 65 kV and 0.7 mA technique, without and with additional filtration. Low contrast, gray scale and spatial resolution were measured utilizing Leeds test objects. Fifteen volunteers underwent pharynx study, ten without and five with aluminum and cooper filters associated, and had the kerma area product/minute compared. RESULTS: The specified filters addition, either separated or associated, allowed an expressive decrease in kerma area product besides an actual improvement in the

  14. Solubility of NpO2 in Na2CO3 solutions

    International Nuclear Information System (INIS)

    Joe, Kih Soo; Yang, Han Beom; Lee, Eil Hee; Kim, Kwang Wook

    2010-03-01

    Solubilities of NpO 2 were measured in 0.1 M Na 2 CO 3 (pH 11.25) and 0.1 M Na 2 CO 3 -0.5M H 2 O 2 (pH 11.25), respectively, for two weeks. Three detection methods such as gas proportional counting (GPC), liquid scintillation counting (LSC) and ICP-MS were used for the measurement of dissolved NpO 2 in the solutions and the results by different methods were compared with each other. The solubility of NpO 2 increased as the contact time increased and those after 2 weeks showed 4.4 x 10 -9 M in 0.10 M Na 2 CO 3 (pH 11.25) and 2.4 x 10 -8 M in 0.10 M Na 2 CO 3 -0.5M H 2 O 2 (pH 11.25), respectively

  15. Propriedades mecânicas e reológicas de nanocompósitos de poliamida 6 com argila organofílica nacional

    Directory of Open Access Journals (Sweden)

    Renê Anisio da Paz

    2013-01-01

    Full Text Available Nanocompósitos de poliamida 6 com argila organofílica foram preparados pelo método de intercalação no estado fundido. Foram estudadas as propriedades reológicas e mecânicas de nanocompósitos com argila nacional. A argila utilizada foi tratada com o sal quaternário de amônio (Cetremide e foi caracterizada por Espectroscopia no Infravermelho (FTIR e difração de raios X (DRX. Os resultados evidenciaram a incorporação do sal na argila e sua organofilização. Para a obtenção dos nanocompósitos, foram preparados concentrados de PA6/argila (1:1 em (m/m e estes foram adicionados na poliamida 6, em quantidade de 3% de argila no composto final, utilizando uma extrusora de rosca dupla corrotacional. Posteriormente, as amostras foram moldadas por injeção e caracterizadas por: reometria capilar, DRX, MET e ensaios mecânicos (tração e impacto. Os resultados de reometria capilar mostraram que a presença da argila organofílica na PA6 aumentou a viscosidade dos sistemas. Por DRX e MET, foi verificado que todos os sistemas apresentaram predominância de estrutura esfoliada. As propriedades mecânicas sob tração foram melhores do que as da poliamida 6.

  16. Evolução estrutural do filme cerâmico de forsterita obtido sobre o aço silício de grão orientado

    Directory of Open Access Journals (Sweden)

    Vasconcelos D. C. L.

    2000-01-01

    Full Text Available Neste trabalho é descrita a formação, sobre o aço silício de grão orientado, de um filme cerâmico obtido a partir de MgO contendo os aditivos TiO2 e SrSO4. O material foi tratado termicamente a 900 0C, 1000 0C e 1200 0C e por 15 horas a 1200 0C. O recobrimento foi analisado por microscopia eletrônica de varredura (MEV, microssonda eletrônica (EDS, difração de raios X e espectroscopia de centelhamento (GDS. A evolução morfológica observada se passa com a formação de uma camada contínua de óxidos na superfície mais externa do material. Com a elevação da temperatura a camada mais externa torna-se mais espessa e aumenta o teor de Mg nas partículas presentes na sub-camada. É possível verificar a presença de forsterita cristalina na superfície das amostras tratadas a temperaturas superiores a 1000 0C. A profundidade de penetração do Mg no material aumenta com a elevação da temperatura, passando de cerca de 75 nm a 900 0C para aproximadamente 1,9 mim a 1200 0C.

  17. Determination of the electronic structure and UV-Vis absorption properties of (Na2-xCux)Ta4O11 from first-principle calculations

    KAUST Repository

    Harb, Moussab

    2013-08-29

    Density functional theory (DFT) and density functional perturbation theory (DFPT) were applied to study the structural, electronic, and optical properties of a (Na2-xCux)Ta4O11 solid solution to accurately calculate the band gap and to predict the optical transitions in these materials using the screened coulomb hybrid (HSE06) exchange-correlation formalism. The calculated density of states showed excellent agreement with UV-vis diffuse reflectance spectra predicting a significant red-shift of the band gap from 4.58 eV (calculated 4.94 eV) to 2.76 eV (calculated 2.60 eV) as copper content increased from 0 to 83.3%. The band gap narrowing in these materials, compared to Na2Ta4O11, results from the incorporation of new occupied electronic states, which are strongly localized on the Cu 3d orbitals, and is located within 2.16-2.34 eV just above the valence band of Na2Ta4O11. These new occupied states, however, possess an electronic character localized on Cu, which makes hole mobility limited in the semiconductor. © 2013 American Chemical Society.

  18. Mechanochemical transformations in Li(Na)AlH4-Li(Na)NH2 systems

    International Nuclear Information System (INIS)

    Dolotko, Oleksandr; Zhang Haiqiao; Ugurlu, Ozan; Wiench, Jerzy W.; Pruski, Marek; Scott Chumbley, L.; Pecharsky, Vitalij

    2007-01-01

    Mechanochemical transformations of tetrahydroaluminates and amides of lithium and sodium have been investigated using gas volumetric analysis, X-ray powder diffraction, solid-state nuclear magnetic resonance (NMR) and transmission electron microscopy. In a transformation of LiAlH 4 and LiNH 2 taken in an 1:1 molar ratio, the amount of released hydrogen (6.6 wt.% after 30 min ball milling) was higher than in any known one pot mechanochemical process involving a hydrogen-containing solid. A total of 4.3 wt.% of hydrogen is released by the NaAlH 4 -NaNH 2 system after 60 min ball milling; and 5.2 wt.% H 2 is released when LiAlH 4 and NaNH 2 or NaAlH 4 and LiNH 2 are ball milled for 90 min and 120 min, respectively. All transformations proceed at room temperature. The mechanism of the overall transformation MAlH 4 (s) + MNH 2 (s) → 2MH(s) + AlN(s) + 2H 2 (g) was identified based on detailed spectroscopic analysis of the intermediate (M 3 AlH 6 ) and final products of the ball milling process

  19. Multiple X-ray tomography using transmitted, scattered and fluorescent radiation

    International Nuclear Information System (INIS)

    Cesareo, R.; Brunetti, A.; Golosio, B.; Lopes, R.T.; Barroso, R.C.; Donativi, M.; Castellano, A.; Quarta, S.

    2003-01-01

    A multiple CT-scanner is described, which contemporaneously uses transmitted, scattered and fluorescent X-rays for Imaging. The scanner is characterized by a small size X-ray tube and by four detectors: a ''pencil'' X-ray NaI(Tl) for transmitted tomography, a larger size NaI(Tl) for 90 C o Compton tomography, a thermoelectrically cooled Si-PIN or CdZnTe for fluorescent imaging and a CdZnTe for Rayleigh (or diffraction) tomography. Examples of applications are shown

  20. Comparison of phase composition, morphology and electrochemical property for Li3−xNaxV2(PO4)3 (x=0.5, 1.5 and 2.0) as lithium storage cathode materials

    International Nuclear Information System (INIS)

    Mao, Jinli; Shao, Lianyi; Li, Peng; Lin, Xiaoting; Shui, Miao; Long, Nengbing; Shu, Jie

    2015-01-01

    Graphical abstract: Display Omitted -- Highlights: •Li 3−x Na x V 2 (PO 4 ) 3 is prepared by a solid-state reaction method. •Li 2.5 Na 0.5 V 2 (PO 4 ) 3 is a three-phase mixture. •Both Li 1.5 Na 1.5 V 2 (PO 4 ) 3 and LiNa 2 V 2 (PO 4 ) 3 are two-phase composite. •Lithium ion diffusion coefficient is detected by cyclic voltammetry. •Structural change of LiNa 2 V 2 (PO 4 ) 3 is observed by in-situ XRD. -- Abstract: Three Li 3-x Na x V 2 (PO 4 ) 3 (x=0.5, 1.5 and 2.0) samples are synthesized by a traditional solid-state reaction method in this work. Their phase composition, surface morphology and electrochemical property are described and compared by using various physical/chemical methods. Phase analysis results reveal that Li 2.5 Na 0.5 V 2 (PO 4 ) 3 consists of monoclinic Li 3 V 2 (PO 4 ) 3 , rhombohedral Li 3 V 2 (PO 4 ) 3 and rhombohedral Na 3 V 2 (PO 4 ) 3. While, both Li 1.5 Na 1.5 V 2 (PO 4 ) 3 and LiNa 2 V 2 (PO 4 ) 3 are the two-phase mixture consisted of rhombohedral Li 3 V 2 (PO 4 ) 3 and rhombohedral Na 3 V 2 (PO 4 ) 3 . Electrochemical testing results reveal that LiNa 2 V 2 (PO 4 ) 3 and Li 1.5 Na 1.5 V 2 (PO 4 ) 3 can deliver the initial discharge capacities of 101.4 mAh g −1 and 108.6 mAh g −1 with a long potential plateau at 3.69 V, respectively. In contrast, Li 2.5 Na 0.5 V 2 (PO 4 ) 3 presents an initial discharge capacity of 111.7 mAh g −1 with four potential plateaus. High lithium ion diffusion coefficient in Li 2.5 Na 0.5 V 2 (PO 4 ) 3 indicates that the existence of monoclinic Li 3 V 2 (PO 4 ) 3 phase can improve the ionic conductivity and then be responsible for good electrochemical performance. Besides, in-situ X-ray diffraction observation of LiNa 2 V 2 (PO 4 ) 3 demonstrates that the phase transition is not fully reversible but quasi-reversible during the lithiation-delithiation process. The partial irreversibility of structural evolution for LiNa 2 V 2 (PO 4 ) 3 induces the capacity loss upon repeated cycles

  1. Influence of using high kV and low m As techniques in the dose of patients submitted to X ray thorax examinations; Influencia do uso de tecnicas de alto kV e baixo mAs na dose em pacientes submetidos a exames de raios X de torax

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Paulo Marcio Campos de, E-mail: pmco@cdtn.b [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Engenharia Nuclear. Programa de Pos-Graduacao em Ciencias e Tecnicas Nucleares; Squair, Peterson Lima; Lacerda, Marco Aurelio de Sousa; Silva, Teogenes Augusto da, E-mail: pls@cdtn.b, E-mail: masl@cdtn.b, E-mail: silvata@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-07-01

    Dosimetric studies of patients subject to radiodiagnostic have got a special attention in Brazil although they are not required by the Brazilian legislation. However, in several Brazilian clinics there have been observed the use of techniques with lower peak voltage and higher electric charges values in spite the European Commission recommends the high voltages with low electric charge values in order to reduce the patient dose. This work compares three methodologies for evaluating the organ absorbed doses in patients undergoing chest x-rays at two techniques (80 k Vp and 10 m As; 120 k Vp and 2 m As): the PCXMC and CALDose{sub X} Monte Carlo based software and experimental measurements with T L dosimeters in a anthropomorphic phantom. The experimental measurements showed the technique with high voltage was dose reduced by approximately 60% in the entrance skin in relation to low voltage technique and the software showed similar dose reduction, shows the importance of adopting techniques which have high voltage values and low electrical charges, unlike usually found on chest x-rays in some hospitals and clinics in Brazil. (author)

  2. Robust high pressure stability and negative thermal expansion in sodium-rich antiperovskites Na3OBr and Na4OI2

    International Nuclear Information System (INIS)

    Wang, Yonggang; Wen, Ting; Park, Changyong; Kenney-Benson, Curtis; Pravica, Michael; Zhao, Yusheng; Yang, Wenge

    2016-01-01

    The structure stability under high pressure and thermal expansion behavior of Na 3 OBr and Na 4 OI 2 , two prototypes of alkali-metal-rich antiperovskites, were investigated by in situ synchrotron X-ray diffraction techniques under high pressure and low temperature. Both are soft materials with bulk modulus of 58.6 GPa and 52.0 GPa for Na 3 OBr and Na 4 OI 2 , respectively. The cubic Na 3 OBr structure and tetragonal Na 4 OI 2 with intergrowth K 2 NiF 4 structure are stable under high pressure up to 23 GPa. Although being a characteristic layered structure, Na 4 OI 2 exhibits nearly isotropic compressibility. Negative thermal expansion was observed at low temperature range (20–80 K) in both transition-metal-free antiperovskites for the first time. The robust high pressure structure stability was examined and confirmed by first-principles calculations among various possible polymorphisms qualitatively. The results provide in-depth understanding of the negative thermal expansion and robust crystal structure stability of these antiperovskite systems and their potential applications

  3. Distribuição de raízes da laranja 'Valência' irrigada por autopropelido Root distribution of 'Valência' orange under traveler gun irrigation

    Directory of Open Access Journals (Sweden)

    Roberto Testezlaf

    2007-06-01

    Full Text Available O objetivo deste trabalho foi avaliar a distribuição do sistema radicular de laranjas 'Valência' com porta-enxerto limão 'Cravo' (Citrus limonia Osbeck, com 36 anos de idade, irrigadas por autopropelido, em Latossolo Vermelho-Amarelo. Foram retiradas amostras de solo em dois raios ortogonais de cinco árvores, um na direção da linha da cultura e outro na entrelinha, até 60 cm de profundidade. A distribuição do sistema radicular foi determinada pela massa de matéria seca das raízes com diâmetro igual ou menor que 1,5 mm. A camada de 0-40 cm apresentou o maior porcentual de raízes, para ambos os raios de amostragem, com redução na concentração a partir do final da copa das árvores para as entrelinhas da cultura.The objective of this work was to evaluate root distribution of 36 years old 'Valência' oranges with Citrus limonia Osbeck rootstock, under traveler gun irrigation, in Typic Hapludox. Soil samples were taken from five trees in two orthogonal radii, one in the direction of the crop rows and the other in between rows, at 60 cm depth. The root system distribution was determined by dry weight of the roots with diameters equal or less than 1.5 mm. The 0-40 cm soil layer showed the larger percentage of root, with reduction of root concentration from the end of the tree canopy to between rows.

  4. The 4D evolution of porosity during ongoing pressure-solution processes in NaCl using x-ray microtomography

    Science.gov (United States)

    Macente, Alice; Fusseis, Florian; Butler, Ian; Tudisco, Erika; Hall, Stephen; Andò, Edward

    2016-04-01

    Pressure-solution creep is a common deformation mechanism in the upper crust. It represents a mass transfer via dissolution-reprecipitation that critically affects the hydraulic properties of rocks. Successful management of safe radioactive storage sites in rock-salt deposits critically depends on an accurate knowledge of the hydro-mechanical behaviour of salt deposits. Despite numerous lab experiments that have been conducted, many aspects of pressure-solution are still poorly understood. There is little knowledge about the spatio-temporal evolution of porosity and permeability during pressure-solution creep. While rates of pressure-solution creep in silicates and carbonates are slow, which makes laboratory investigations of these materials impractical, compaction experiments have demonstrated that NaCl samples deform sufficiently fast to study pressure-solution creep in a lab environment at room temperature and modest loads. We present results from novel experiments that quantify the 4-dimensional (three spatial dimensions plus time) evolution of pressure-solution processes using in-situ x-ray microtomography. Our experiments are performed in custom made x-ray transparent presses. 5 mm diameter NaCl powder samples with a grain size of 250-300 μm are loaded dry into the press and pre-compacted to produce a starting aggregated material. The sample is then flooded with saturated NaCl solution and loaded uniaxially by means of a pneumatic actuator to a constant uniaxial stress. Different sample mixtures were tested, as well as different uniaxial loads. The resulting deformation of the samples is documented in 3-dimensional microtomographic datasets, acquired at regular time intervals. Image analysis allowed characterization of the microstructural evolution of the NaCl grains and the spatio-temporal distribution of porosity during ongoing mechanical and chemical compaction. The microtomography data have also been analysed with 3D Digital Image Correlation (3D-DIC or

  5. Study of the 23Na EFG (Electrostatic Field Gradient) tensor on single crystals of Na2S.9H2O by wideline NMR

    International Nuclear Information System (INIS)

    Miksche, G.

    1982-01-01

    The quadrupole coupling constant |e 2 qQ/n| if 23 Na has been determined by measuring single crystals of Na 2 S.9H 2 O at room temperature. A value of 687.5 +- 1.2 kHz was found. The asymmetry parameter eta = (qsub(x'x') - qsub(y'y')) / qsub(z'z') of the efg-tensor is zero, there is axial symmetry. The principle axis of the efg-tensor runs parallel to the main crystallographic axis c, the value of the main component of the efg-tensor in c-direction is 171.875 +- 0.6 kHz. The longitudinal relaxation time T 1 has been evaluated as 1.8 s. On this account, the mean distance between two Na-atoms has been determined by measuring the splitting of the central line due to dipole-dipole interaction. The Na-Na distance was found with 0.36 +- 0.007 nm. This value is in good agreement with results from neutron diffraction studies. It was not possible to determine direction and length of hydrogen bonds by NMR-results. A method of growing single crystals of Na 2 S.9H 2 O of demanded size and purity has been described. Constructional details and technical data of a self-made wideline-NMR-spectrometer are added in an appendix. (Author)

  6. PPV analysis and tension of spectral peak in an X radiation equipment for dosemeter calibration; Analise do PPV e tensao de pico espectral em um equipamento de raios-X para calibracao de dosimetros

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, P.M.C.; Santana, P.C. [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Anatomia e Imagem; Lacerda, M.A.S.; Silva, T.A. da, E-mail: pmco@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2014-07-01

    Dosimetry laboratories around the world try to achieve metrology consistency between the X-rays beams for therapy and diagnostic detectors calibration. One of the parameters to characterize X-ray beam is the practical peak voltage (PPV) assessment. In this work were evaluated the PPV and spectral peak voltage in the potential constant X-ray equipment, that result in a mean difference of 1.4 %. (author)

  7. AgSb(S{sub x}Se{sub 1−x}){sub 2} thin films for solar cell applications

    Energy Technology Data Exchange (ETDEWEB)

    González, J.O. [Universidad Autónoma de Nuevo León, Facultad de Ingeniería Mecánica y Eléctrica, San Nicolás de los Garza, Nuevo León 66450, México (Mexico); Shaji, S.; Avellaneda, D. [Universidad Autónoma de Nuevo León, Facultad de Ingeniería Mecánica y Eléctrica, San Nicolás de los Garza, Nuevo León 66450, México (Mexico); Universidad Autónoma de Nuevo León-CIIDIT, Apodaca, Nuevo León, México (Mexico); Castillo, A.G.; Roy, T.K. Das [Universidad Autónoma de Nuevo León, Facultad de Ingeniería Mecánica y Eléctrica, San Nicolás de los Garza, Nuevo León 66450, México (Mexico); and others

    2013-05-15

    Highlights: ► AgSb(S{sub x}Se{sub 1−x}){sub 2} thin films were formed by heating Na{sub 2}SeSO{sub 3} dipped Sb{sub 2}S{sub 3}/Ag layers. ► S/Se ratio was varied by changing the dipping time in Na{sub 2}SeSO{sub 3} solution. ► Characterized the films using XRD, XPS, SEM, Optical and electrical measurements. ► Band gap engineering of 1−1.1 eV for x = 0.51 and 0.52 respectively. ► PV Glass/FTO/CdS/AgSb(S{sub x}Se{sub 1−x}){sub 2}/C were prepared showing V{sub oc} = 410 mV, J{sub sc} = 5.7 mA/cm{sup 2}. - Abstract: Silver antimony sulfoselenide (AgSb(S{sub x}Se{sub 1−x}){sub 2}) thin films were prepared by heating glass/Sb{sub 2}S{sub 3}/Ag layers after selenization using sodium selenosulphate solution. First, Sb{sub 2}S{sub 3} thin films were deposited on glass substrates from a chemical bath containing SbCl{sub 3} and Na{sub 2}S{sub 2}O{sub 3}. Then Ag thin films were thermally evaporated onto glass/Sb{sub 2}S{sub 3}, followed by selenization by dipping in an acidic solution of Na{sub 2}SeSO{sub 3}. The duration of selenium dipping was varied as 30 min and 2 h. The heating condition was at 350 °C for 1 h in vacuum. Analysis of X-ray diffraction pattern of the thin films formed after heating showed the formation of AgSb(S{sub x}Se{sub 1−x}){sub 2}. Morphology and elemental analysis were done by scanning electron microscopy and energy dispersive X-ray detection. Depth profile of composition of the thin films was performed by X-ray Photoelectron Spectroscopy. The spectral study showed the presence of Ag, Sb, S, and Se, and the corresponding binding energy analysis confirmed the formation of AgSb(S{sub x}Se{sub 1−x}){sub 2}. Photovoltaic structures (PV) were prepared using AgSb(S{sub x}Se{sub 1−x}){sub 2} thin films as absorber and CdS thin films as window layers on FTO coated glass substrates. The PV structures were heated at 60–80 °C in air for 1 h to improve ohmic contact. Analysis of J–V characteristics of the PV structures showed V

  8. SISTEMA DE CROMOSSOMOS SEXUAIS MÚLTIPLOS X1X1X2X2/X1X2Y NA MOSCA-DAS-FRUTAS Anastrepha sororcula (DIPTERA: TEPHRITIDAE

    Directory of Open Access Journals (Sweden)

    Inês Regina de Araújo Moura Cunha

    2014-08-01

    Full Text Available Sistemas de cromossomos sexuais simples estão difundidos entre os Tephritidae do gênero Anastrepha. Espécies deste gênero apresentam enorme importância pelo impacto que causam em frutíferas cultivadas, sobretudo no nordeste do Brasil. Análises citogenéticas desenvolvidas em Anastrepha sororcula, através da análise da estrutura cariotípica e bandamento C revelaram a presença de um sistema de cromossomos sexuais múltiplos do tipo X1X1X2X2/X1X2Y nesta espécie. Enquanto as fêmeas apresentam um cariótipo homomórfico com 2n=12, os machos possuem 2n=11, onde se destaca um grande cromossomo Y despareado. O nível de divergência cariotípica da espécie A. sororcula do nordeste, com a presença de um sistema de cromossomos sexuais múltiplos, em relação às regiões central e sudeste do Brasil, podem indicar a ocorrência de impedimentos reprodutivos entre os exemplares das duas áreas e que possivelmente, como outros exemplos que existem neste gênero, A. sororcula constitua um complexo de espécies ainda não inteiramente definido. Palavras-chave: Alossomos, peste agrícola, citogenética de insetos, heterocromatina. DOI: http://dx.doi.org/10.18561/2179-5746/biotaamazonia.v4n2p1-4

  9. Composition dependence of electric-field-induced structure of Bi{sub 1/2}(Na{sub 1−x}K{sub x}){sub 1/2}TiO{sub 3} lead-free piezoelectric ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Khansur, Neamul H. [School of Materials Science and Engineering, UNSW Australia, 2052 Sydney (Australia); Department of Materials Science, University of Erlangen-Nürnberg, Erlangen 91058 (Germany); Benton, Rachel [Department of Chemical and Biomolecular Engineering, North Carolina State University, North Carolina 27695 (United States); Dinh, Thi Hinh; Lee, Jae-Shin [School of Materials Science and Engineering, University of Ulsan, Ulsan 680-749 (Korea, Republic of); Jones, Jacob L. [Department of Materials Science and Engineering, North Carolina State University, North Carolina 27695 (United States); Daniels, John E. [School of Materials Science and Engineering, UNSW Australia, 2052 Sydney (Australia)

    2016-06-21

    Microscopic origins of the electric-field-induced strain for three compositions of Bi{sub 1/2}(Na{sub 1−x}K{sub x}){sub 1/2}TiO{sub 3} (x = 0.14, 0.18, and 0.22) (BNKT100x) ceramics have been compared using in situ high-energy (87.12 keV) X-ray diffraction. In the as-processed state, average crystallographic structure of BNKT14 and BNKT18 were found to be of rhombohedral symmetry, while BNKT22 was tetragonal. Diffraction data collected under electric field showed that both the BNKT14 and BNKT18 exhibit induced lattice strain and non-180° ferroelectric domain switching without any apparent phase transformation. The BNKT22 composition, in addition to the lattice strain and domain switching, showed an electric-field-induced transformation from a tetragonal to mixed tetragonal-rhombohedral state. Despite the difference in the origin of microscopic strain responses in these compositions, the measured macroscopic poling strains of 0.46% (BNKT14), 0.43% (BNKT18), and 0.44% (BNKT22) are similar. In addition, the application of a second poling field of opposite polarity to the first increased the magnitude of non-180° ferroelectric domain texture. This was suggested to be related to the existence of an asymmetric internal bias field.

  10. Optimization of protocols and increase the life of the tube of X rays in computer tomography;Otimizacao de protocolos e aumento dsa vida util do tubo de raios X em tomografia computadorizada

    Energy Technology Data Exchange (ETDEWEB)

    Viero, A.P. [Centro Universitario Franciscano, Santa Maria, RS (Brazil); Botelho, Marcel Z.; Torunsky, Caroline G. [STAFF - Solucoes em Fisica Medica e Radioprotecao, Santa Maria, RS (Brazil); Paula, V. [Clinica Radiologica Caridade (DIX), Santa Maria, RS (Brazil)

    2009-07-01

    The objective of this study was to evaluate the reduction of the radiation dose and X-ray tube heating in computed tomography exams. Exams of the skull, abdomen and thorax were evaluated. It was verified that the technique used could be changed, suggesting new protocols and comparing image quality, radiation dose and X-ray tube heating. A mAs reduction could be done without compromising the diagnostic quality bringing a decrease up to 21,92% in the dose of skull exams, 20,25% for the examinations, abdomen and 22,06% for the examinations of thorax. The reduction on the X-ray tube heating for skull, abdomen and thorax exams was approximately 22,2%, 20,0% and 22,2% respectively. It is concluded that a change on the described protocols will cause a significant reduction dose delivered to patients and on X-ray tube heating without compromising the diagnosis. (author)

  11. Parâmetros quantitativos da anatomia da madeira de eucalípto que cresceu em diferentes locais

    Directory of Open Access Journals (Sweden)

    José Geraldo Lima de Oliveira

    2012-06-01

    Full Text Available Sabe-se da existência de influência do local de crescimento nas propriedades da madeira e que estas são influenciadas principalmente pela sua estrutura anatômica. Este trabalho teve como objetivo avaliar parâmetros quantitativos da estrutura anatômica da madeira de eucalipto de um clone de híbrido natural de Eucalyptus grandis W. Hill ex-Maiden, ocorrentes na localidade de Rio Claro-SP, com 64 meses de idade. As 138 árvores foram cultivadas nos os municípios de Aracruz, Domingos Martins, Alto Rio Novo e São Mateus - ES e Mutum e Aimorés - MG. Os parâmetros anatômicos mensurados foram o diâmetro e a frequência vascular, o comprimento, a largura, o diâmetro do lume e a espessura da parede das fibras e ainda a altura, largura e frequência de raios. De acordo com os resultados obtidos pode-se concluir que relativo aos vasos houve diferenças significativas entre as regiões. Quanto aos raios, também foram verificadas diferenças significativas relativas à altura, largura e frequência diversas regiões. As madeiras produzidas na região de Aracruz possuem fibras de comprimento e espessura de paredes muito inferiores às produzidas nas demais regiões estudadas.

  12. Characteristics of the Na/beta-alumina/Na cell as a sodium vapor pressure sensor

    International Nuclear Information System (INIS)

    Takikawa, O.; Imai, A.; Harata, M.

    1982-01-01

    The EMF and voltage-current characteristics for a galvanic cell with the configuration Na vapor (P 1 )/sodium beta-alumina/Na vapor (P 2 ) were studied. It was verified that the EMF followed the Nernst relation over a wide pressure range. For example, when P 1 = 2 x 10 -2 mm Hg and beta-alumina temperature = 340 0 C, the measured EMF agreed with the calculated value in P 2 range from 10 -5 to 10 -2 mm Hg. At lower pressure range, the measured EMF showed a negative deviation. Coexisting argon gas did not influence the cell EMF characteristic. In an atmosphere containing oxygen, the measured EMF was very high at first. Then it decreased and finally approached a value which agreed with the Nernst equation after several hours. At low beta-alumina temperatures, current saturation was observed in the voltage versus current relation with the anode on the P 2 side. Although the sodium pressure could be determined from saturating current measurement, the measurable pressure range was narrower than that for EMF measurement. At high beta-alumina temperature, current saturation was not clear. Values of 6 x 10 -6 (Ω cm) -1 for the electron conductivity and 6 x 10 -10 (Ω cm) -1 for the hole conductivity at 340 0 C were obtained for beta-alumina from the voltage-current characteristics at low sodium pressure. (Auth.)

  13. Densidade mineral óssea sistêmica vs situação clínica periodontal: estudo transversal em mulheres na pós-menopausa Systemic bone mineral density versus clinical periodontal condition: cross-sectional study in postmenopausal women

    Directory of Open Access Journals (Sweden)

    Fernanda Ferreira Lopes

    2008-10-01

    Full Text Available OBJETIVO: Analisar a densidade mineral óssea sistêmica (DMO e a situação periodontal em mulheres na pós-menopausa, visando compreender o papel da osteoporose como um fator de risco à doença periodontal. MÉTODOS: A amostra da pesquisa foi constituída por 47 mulheres na pós-menopausa, que foram divididas em três grupos: 14 com osso normal (G1, 17 no grupo com osteopenia (G2 e 16 pacientes com osteoporose (G3, através da avaliação da densidade mineral óssea (DMO, aferida pela absormetria de dupla emissão com raios-X na área lombar (L1-L4. A condição periodontal foi avaliada pelo índice gengival (IG, índice da placa (IP e o nível de inserção clínica (NIC. Os resultados tabulados foram analisados e submetidos ao tratamento estatístico, através do teste ANOVA a um critério (α=0,05 e o teste de correlação de Pearson (α=0,01. RESULTADOS: Verificou-se não haver diferenças significativas na situação periodontal em mulheres na pós-menopausa, através das variáveis IG, IP e NIC. Observou-se correlação significativa entre os parâmetros periodontais IG, IP e NIC entre si (p0,01. CONCLUSÃO: A situação periodontal em mulheres na pós-menopausa não depende da massa óssea sistêmica, não havendo correlação significativa entre DMO e os parâmetros periodontais, sendo necessárias pesquisas longitudinais para considerar a osteoporose como um fator de risco à doença periodontal.OBJECITVE: To assess the systemic bone mineral density (BMD and the periodontal situation in postmenopausal women, to understand the possible role of osteoporosis as a risk factor for periodontal disease. METHODS: The sample was comprised of 47 postmenopausal women, divided into 3 groups: 14 patients with normal bones (G1, 17 with osteopenia (G2 and 16 patients with osteoporosis (G3. Data was obtained using bone mineral density (BMD, obtained by dual energy x-ray absorptiometry (DXA in the lumbar area (L1-L4. Periodontal condition was

  14. The local structure of CaNa pyroxenes. I. XANES study at the Na K-edge

    International Nuclear Information System (INIS)

    Mottana, Annibale; Murata, T.; Wu, Ziyu; Marcelli, Augusto; Paris, E.

    1996-07-01

    X-ray absorption Na K-edge spectra have been recorded on synthetic end member jadeite and on a series of natural Ca-Na pyroxenes compositionally straddling the Jd-Di. The disordered C2/c members of the series are systematically different from the ordered P2/n members. These differences can be interpreted and explained by comparing the experimental spectra with theoretical spectra. These have been calculated by the multiple-scattering formalism from the atomic positional parameters determined by single-crystal X-ray diffraction structure refinement on the same samples. In the full multiple scattering region of the spectrum (1075 to 1095 eV) C-pyroxenes exhibit three features which reflect the 6-2 configuration of the O back-scattering atoms around the Na absorber located at the center of the cluster (site M2 of the jadeite structure). P-pyroxenes show more complicated spectra in which at least four features can be recognized; they reflect the two types of the configuration (6-2 and 4-2-2) of the oxygens around Na in the two independent M2 and M21 eight-fold coordinated sites of the omphacite structure. A weak, sometimes poorly resolved peak at 1079 eV diagnostic and discriminates C- from P-pyroxenes. The Garnet Ridge C2/c impure jadeite exhibits a spectrum which is intermediate between those of jadeite and omphacite. The Hedin-Lundqist potential proves best for these insulating materials and allows multiple-scattering calculations agreeing well with experiments. The assessment of the local electronic properties of compositionally and structurally complex minerals such as clinopyroxenes is thus enhanced

  15. Structural investigation and luminescence of nanocrystalline lanthanide doped NaNbO{sub 3} and Na{sub 0.5}K{sub 0.5}NbO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Pin, Sonia [Paul Scherrer Institute, General Energy Research (ENE), Laboratory for Bioenergy and Catalysis, CH-5232 Villigen PSI (Switzerland); Piccinelli, Fabio [Dipartimento di Biotecnologie, Universita di Verona and INSTM, UdR Verona, Strada Le Grazie 15, I-37134 Verona (Italy); Upendra Kumar, Kagola [Grupo de Fotonica e Fluidos Complexos, Instituto de Fisica, Universidade Federal de Alagoas (UFAL), Maceio-AL (Brazil); Enzo, Stefano [Dipartimento di Chimica, Universita di Sassari, 07100 Sassari (Italy); Ghigna, Paolo [Dipartimento di Chimica, Universita di Pavia, V.le Taramelli 16, I-27100 Pavia (Italy); Cannas, Carla; Musinu, Anna [Dipartimento di Scienze Chimiche, Universita di Cagliari, Cittadella Universitaria Monserrato, I-09042 Cagliari (Italy); Mariotto, Gino [Dipartimento di Informatica, Universita di Verona, Strada Le Grazie 15, I-37134 Verona (Italy); Bettinelli, Marco [Dipartimento di Biotecnologie, Universita di Verona and INSTM, UdR Verona, Strada Le Grazie 15, I-37134 Verona (Italy); Speghini, Adolfo, E-mail: adolfo.speghini@univr.it [Dipartimento di Biotecnologie, Universita di Verona and INSTM, UdR Verona, Strada Le Grazie 15, I-37134 Verona (Italy)

    2012-12-15

    Nd{sup 3+} and Eu{sup 3+} doped NaNbO{sub 3} and Na{sub 0.5}K{sub 0.5}NbO{sub 3} nanostructured multiferroics (nanoparticles or nanorods) were prepared by a sol-gel route. X-Ray powder diffraction results evidence that the sodium and mixed sodium-potassium niobates show orthorhombic (Pmc2{sub 1} space group), and monoclinic structure (Pm space group), respectively, confirmed by the Raman spectra. The local structure around the trivalent lanthanides was investigated with Extended X-ray Absorption Fine Structure spectroscopy at the Ln-K edge and luminescence spectroscopy. The Ln{sup 3+} ions enter the structure by substituting the alkali metals, with a 12-fold oxygen coordination, and inducing a large amount of static disorder. The visible emission bands of the Eu{sup 3+} ions indicate that multiple sites exist for the lanthanide ions, in agreement with the EXAFS results showing the largest amount of static disorder in these samples. A possible indication of clustering of oxygen vacancies around the Ln{sub Na} Double-Prime defect is obtained by VBS calculations. - Graphical Abstract: Ln{sup 3+} doped NaNbO{sub 3} and Na{sub 0.5}K{sub 0.5}NbO{sub 3} nanoparticles or nanorods can be prepared by a simple sol-gel procedure. The synergy of X-ray diffraction, EXAFS and luminescence spectroscopy gives important information on the Ln{sup 3+} local environment. Highlights: Black-Right-Pointing-Pointer Nd{sup 3+} and Eu{sup 3+} doped NaNbO{sub 3} and Na{sub 0.5}K{sub 0.5}NbO{sub 3} nanoparticles or nanorods are prepared by sol-gel. Black-Right-Pointing-Pointer EXAFS indicates that the Ln{sup 3+} ions substitutes the Na{sup +} and K{sup +} ions, inducing a large amount of static disorder. Black-Right-Pointing-Pointer The visible emission bands of the Eu{sup 3+} ions confirm that multiple sites exist for the lanthanide ions.

  16. L-line x-ray fluorescence of cortical bone lead compared with the CaNa2EDTA test in lead-toxic children: public health implications

    International Nuclear Information System (INIS)

    Rosen, J.F.; Markowitz, M.E.; Bijur, P.E.; Jenks, S.T.; Wielopolski, L.; Kalef-Ezra, J.A.; Slatkin, D.N.

    1989-01-01

    Mild to moderate lead toxicity (blood lead, 25-55 micrograms/dl) is a preventable pediatric illness affecting several million preschool children (lead-toxic children) in the United States. In-hospital lead-chelation treatment is predicated upon a positive CaNa 2 EDTA test, which is difficult to perform and impractical in large populations. After the development of an L-line x-ray fluorescence technique (LXRF) that measures cortical bone lead content safely, rapidly, and noninvasively, this study was initiated in lead-toxic children to compare LXRF with the CaNa 2 EDTA test. Moreover, LXRF provided the opportunity to quantify bone lead content. From blood lead and LXRF alone, 90% of lead-toxic children were correctly classified as being CaNa 2 EDTA-positive or -negative. In 76% of 59 lead-toxic children, bone lead values measured by LXRF were equal to or greater than those measured in normal and industrially exposed adults. These results indicate that LXRF may be capable of replacing the CaNa 2 EDTA test. When considered with the known neurotoxic effects on children of low levels of exposure to lead, these results also suggest that either an excessively narrow margin of safety or insufficient safety is provided by present U.S. guidelines, which classify an elevated blood lead concentration as 25 micrograms/dl or greater

  17. Crystallographic characterization of cement pastes hydrated with NaCl; Caracterizacao cristalografica de pastas de cimento hidratadas com NaCl

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Carina Gabriela de Melo e; Martinelli, Antonio Eduardo; Melo, Dulce Maria Araujo; Melo, Marcus Antonio de Freitas; Melo, Vitor Rodrigo de Melo e [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2012-07-01

    One of the major current challenges faced by oil companies is the exploration of pre salt basins. Salt layers deposited upon the evaporation of ocean water and continental separation are mainly formed by NaCl and isolate immense oil reservoirs. The mechanical stability and zonal isolation of oil wells that run through salt layers must be fulfilled by cement sheaths saturated with NaCl to assure chemical compatibility between cement and salt layer. The present study aimed at evaluating the effect of NaCl addition on the hydration of oil well cement slurries as well as identifying the nature of crystalline phases present in the hardened cement. To that end, cement slurries containing NaCl were mixed, hardened and characterized by X-ray diffraction. The results revealed that the presence of NaCl affects the formation of hydration products by the presence of Friedel's salt. The intensity of the corresponding peaks increase as the contents of NaCl in the slurry increase. High concentrations of NaCl in Portland slurries increase the setting time of cement and the presence of Friedel's salt decreases the strength of the hardened cement. (author)

  18. NaCl islands decorated with 2D or 3D 3,4,9,10-perylene-tetracarboxylic-dianhydride nanostructures

    Energy Technology Data Exchange (ETDEWEB)

    Sun Xiaonan [Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, NL-9747 AG Groningen (Netherlands); Silly, Fabien, E-mail: Fabien.silly@cea.fr [Zernike Institute for Advanced Materials, University of Groningen, Nijenborgh 4, NL-9747 AG Groningen (Netherlands); CEA, IRAMIS, SPCSI, Nanostructures and Organic Semiconductors Laboratory, F-91191 Gif-sur-Yvette (France); UPMC, IPCM, UMR CNRS 7201, 4 place Jussieu, F-75005 Paris (France)

    2010-01-15

    The formation of PTCDA (3,4,9,10-perylene-tetracarboxylic-dianhydride) nanostrutures on Au(1 1 1)-(22x{radical}(3)) covered with NaCl islands has been studied using scanning tunneling microscopy (STM). Atomically resolved STM images show that NaCl grows as (1 0 0)-terminated layers on Au(1 1 1)-(22x{radical}(3)). Local atomic hexagonal packing has also been observed in the NaCl(1 0 0) layer. At submonolayer NaCl coverage, PTCDA forms two-dimensional islands on the Au(1 1 1) surface and nucleate preferentially at the NaCl island step edges. When the Au surface is fully covered with NaCl layers, PTCDA molecules form three-dimensional molecular clusters decorating the step edges of NaCl layers.

  19. Pesquisa Metodológica da Diretoria de Cartometrônica aplicada à Determinação e Frequência de Vegetação em Municípios Vizinhos a Gravataí, Num Raio de 200 Km

    Directory of Open Access Journals (Sweden)

    Hans A. Thofehrn

    2014-05-01

    Full Text Available Versa sobre o projeto de pesquisa metodológica da Diretoria de Cartometrônica aplicada à Determinação e Frequência de Vegetação em Municípios Vizinhos a Gravataí. O projeto se propõe estudar a localização, a frequência e a economicidade de aquisição de madeira para uma aglomeração localizada num raio de 200 Km em torno da sede de sua industrialização, através da análise de fotos aéreas, mapeamento e matrizes matemáticas Trabalho desenvolvido pela Unidade de Geografia e Cartografia (UGC por equipe coordenada pelo geógrafo Hans A. Thofehrn.

  20. Na-Ion Intercalation and Charge Storage Mechanism in 2D Vanadium Carbide

    Energy Technology Data Exchange (ETDEWEB)

    Bak, Seong-Min [Chemistry Division, Brookhaven National Laboratory, Upton NY 11973 USA; Qiao, Ruimin [Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley CA 94720 USA; Yang, Wanli [Advanced Light Source, Lawrence Berkeley National Laboratory, Berkeley CA 94720 USA; Lee, Sungsik [X-Ray Science Division, Argonne National Laboratory, Argonne IL 60439 USA; Yu, Xiqian [Institute of Physics, Chinese Academy of Science, Beijing 100190 China; Anasori, Babak [Department of Material Science and Engineering, A.J. Drexel Nanomaterials Institute, Drexel University, Philadelphia PA 19104 USA; Lee, Hungsui [Chemistry Division, Brookhaven National Laboratory, Upton NY 11973 USA; Gogotsi, Yury [Department of Material Science and Engineering, A.J. Drexel Nanomaterials Institute, Drexel University, Philadelphia PA 19104 USA; Yang, Xiao-Qing [Chemistry Division, Brookhaven National Laboratory, Upton NY 11973 USA

    2017-07-14

    Two-dimensional vanadium carbide MXene containing surface functional groups (denoted as V2CTx, where Tx are surface functional groups) was synthesized and studied as anode material for Na-ion batteries. V2CTx anode exhibits reversible charge storage with good cycling stability and high rate capability through electrochemical test. The charge storage mechanism of V2CTx material during Na+ intercalation/deintercalation and the redox reaction of vanadium were studied using a combination of synchrotron based X-ray diffraction (XRD), hard X-ray absorption near edge spectroscopy (XANES) and soft X-ray absorption spectroscopy (sXAS). Experimental evidence of a major contribution of redox reaction of vanadium to the charge storage and the reversible capacity of V2CTx during sodiation/desodiation process have been provided through V K-edge XANES and V L2,3-edge sXAS results. A correlation between the CO32- content and Na+ intercalation/deintercalation states in the V2CTx electrode observed from C and O K-edge in sXAS results imply that some additional charge storage reactions may take place between the Na+-intercalated V2CTx and the carbonate based non-aqueous electrolyte. The results of this study will provide valuable information for the further studies on V2CTx as anode material for Na-ion batteries and capacitors.